Determining the Factors Affecting Labor Productivity of Nurses

OpenAIRE

Yurdanur Dikmen; Dilek Kara Yilmaz; Handenur Basaran; Nasibe Yagmur Filiz

2016-01-01

Aim: This study was conducted to determine the factors affecting the labor productivity of nurses. Material and Methods: The study which was planned as descriptive and analytical was carried out with 156 nurses who volunteered to participate in the study in a public hospital in the northwest of Turkey. Data was collected with the and ldquo;Participant Presentation Form and rdquo; and the questionnaire including the factors affecting labor productivity which was developed by Ozkoc (2005). ...

Productivity and Performance Measurement

DEFF Research Database (Denmark)

Hald, Kim Sundtoft; Spring, Martin

This study explores conceptually how performance measurement as discussed in the literature, enables or constrains the ability to manage and improve productivity. It uses an inter-disciplinary literature review to identify five areas of concern relating productivity accounting to the ability...... to improve productivity: “Productivity representation”; “productivity incentives”, “productivity intervention”; “productivity trade-off or synergy” and “productivity strategy and context”. The paper discusses these areas of concern and expands our knowledge of how productivity and performance measurement...

Characterization of Adipose Tissue Product Quality Using Measurements of Oxygen Consumption Rate.

Science.gov (United States)

Suszynski, Thomas M; Sieber, David A; Mueller, Kathryn; Van Beek, Allen L; Cunningham, Bruce L; Kenkel, Jeffrey M

2018-03-14

Fat grafting is a common procedure in plastic surgery but associated with unpredictable graft retention. Adipose tissue (AT) "product" quality is affected by the methods used for harvest, processing and transfer, which vary widely amongst surgeons. Currently, there is no method available to accurately assess the quality of AT. In this study, we present a novel method for the assessment of AT product quality through direct measurements of oxygen consumption rate (OCR). OCR has exhibited potential in predicting outcomes following pancreatic islet transplant. Our study aim was to reapportion existing technology for its use with AT preparations and to confirm that these measurements are feasible. OCR was successfully measured for en bloc and postprocessed AT using a stirred microchamber system. OCR was then normalized to DNA content (OCR/DNA), which represents the AT product quality. Mean (±SE) OCR/DNA values for fresh en bloc and post-processed AT were 149.8 (± 9.1) and 61.1 (± 6.1) nmol/min/mg DNA, respectively. These preliminary data suggest that: (1) OCR and OCR/DNA measurements of AT harvested using conventional protocol are feasible; and (2) standard AT processing results in a decrease in overall AT product quality. OCR measurements of AT using existing technology can be done and enables accurate, real-time, quantitative assessment of the quality of AT product prior to transfer. The availability and further validation of this type of assay could enable optimization of fat grafting protocol by providing a tool for the more detailed study of procedural variables that affect AT product quality.

Measures to Evaluate the Effects of DBS on Speech Production

Science.gov (United States)

Weismer, Gary; Yunusova, Yana; Bunton, Kate

2011-01-01

The purpose of this paper is to review and evaluate measures of speech production that could be used to document effects of Deep Brain Stimulation (DBS) on speech performance, especially in persons with Parkinson disease (PD). A small set of evaluative criteria for these measures is presented first, followed by consideration of several speech physiology and speech acoustic measures that have been studied frequently and reported on in the literature on normal speech production, and speech production affected by neuromotor disorders (dysarthria). Each measure is reviewed and evaluated against the evaluative criteria. Embedded within this review and evaluation is a presentation of new data relating speech motions to speech intelligibility measures in speakers with PD, amyotrophic lateral sclerosis (ALS), and control speakers (CS). These data are used to support the conclusion that at the present time the slope of second formant transitions (F2 slope), an acoustic measure, is well suited to make inferences to speech motion and to predict speech intelligibility. The use of other measures should not be ruled out, however, and we encourage further development of evaluative criteria for speech measures designed to probe the effects of DBS or any treatment with potential effects on speech production and communication skills. PMID:24932066

How does burnout affect physician productivity? A systematic literature review

Science.gov (United States)

2014-01-01

Background Interest in the well-being of physicians has increased because of their contributions to the healthcare system quality. There is growing recognition that physicians are exposed to workplace factors that increase the risk of work stress. Long-term exposure to high work stress can result in burnout. Reports from around the world suggest that about one-third to one-half of physicians experience burnout. Understanding the outcomes associated with burnout is critical to understanding its affects on the healthcare system. Productivity outcomes are among those that could have the most immediate effects on the healthcare system. This systematic literature review is one of the first to explore the evidence for the types of physician productivity outcomes associated with physician burnout. It answers the question, “How does burnout affect physician productivity?” Methods A systematic search was performed of: Medline Current, Medline in process, PsycInfo, Embase and Web of Science. The search period covered 2002 to 2012. The searches identified articles about practicing physicians working in civilian settings. Articles that primarily looked only at residents or medical students were excluded. Productivity was captured by hours worked, patients seen, sick leave, leaving the profession, retirement, workload and presenteeism. Studies also were excluded if: (1) the study sample was not comprised of at least 50% physicians, (2) the study did not examine the relationship between burnout and productivity or (3) a validated measure of burnout was not used. Results The search identified 870 unique citations; 5 met the inclusion/exclusion criteria. This review indicates that globally there is recognition of the potential impact of physician burnout on productivity. Productivity was examined using: number of sick leave days, work ability, intent to either continue practicing or change jobs. The majority of the studies indicate there is a negative relationship between

How does burnout affect physician productivity? A systematic literature review.

Science.gov (United States)

Dewa, Carolyn S; Loong, Desmond; Bonato, Sarah; Thanh, Nguyen Xuan; Jacobs, Philip

2014-07-28

Interest in the well-being of physicians has increased because of their contributions to the healthcare system quality. There is growing recognition that physicians are exposed to workplace factors that increase the risk of work stress. Long-term exposure to high work stress can result in burnout. Reports from around the world suggest that about one-third to one-half of physicians experience burnout. Understanding the outcomes associated with burnout is critical to understanding its affects on the healthcare system. Productivity outcomes are among those that could have the most immediate effects on the healthcare system. This systematic literature review is one of the first to explore the evidence for the types of physician productivity outcomes associated with physician burnout. It answers the question, "How does burnout affect physician productivity?" A systematic search was performed of: Medline Current, Medline in process, PsycInfo, Embase and Web of Science. The search period covered 2002 to 2012. The searches identified articles about practicing physicians working in civilian settings. Articles that primarily looked only at residents or medical students were excluded. Productivity was captured by hours worked, patients seen, sick leave, leaving the profession, retirement, workload and presenteeism. Studies also were excluded if: (1) the study sample was not comprised of at least 50% physicians, (2) the study did not examine the relationship between burnout and productivity or (3) a validated measure of burnout was not used. The search identified 870 unique citations; 5 met the inclusion/exclusion criteria. This review indicates that globally there is recognition of the potential impact of physician burnout on productivity. Productivity was examined using: number of sick leave days, work ability, intent to either continue practicing or change jobs. The majority of the studies indicate there is a negative relationship between burnout and productivity. However

Production measurements at LHCb

CERN Document Server

AUTHOR|(INSPIRE)INSPIRE-00392425

2017-01-01

The $\\text{LHC}b$ detector, with its excellent momentum resolution and flexible trigger strategy, is ideally suited for measuring heavy quark and quarkonia production properties. In addition, the new system of forward shower counters installed upstream and downstream has begun to be used, therefore the experiment is being suited to measure central exclusive production. The $\\text{LHC}b$ measurements of inclusive and differential cross-sections of the production of $J/\\psi$ resonance and $J/\\psi$ pairs, as well bottom quarks and $Z^0$ boson, based on Run 2 datasets are summarized. Finally, results on the prompt production of open charm hadrons and the exclusive production of charmonium are discussed.

The marketing implications of affective product design.

Science.gov (United States)

Seva, Rosemary R; Duh, Henry Been-Lirn; Helander, Martin G

2007-11-01

Emotions are compelling human experiences and product designers can take advantage of this by conceptualizing emotion-engendering products that sell well in the market. This study hypothesized that product attributes influence users' emotions and that the relationship is moderated by the adherence of these product attributes to purchase criteria. It was further hypothesized that the emotional experience of the user influences purchase intention. A laboratory study was conducted to validate the hypotheses using mobile phones as test products. Sixty-two participants were asked to assess eight phones from a display of 10 phones and indicate their emotional experiences after assessment. Results suggest that some product attributes can cause intense emotional experience. The attributes relate to the phone's dimensions and the relationship between these dimensions. The study validated the notion of integrating affect in designing products that convey users' personalities.

Measurement of photon production cross sections with the ATLAS detector

CERN Document Server

Turra, Ruggero; The ATLAS collaboration

2017-01-01

The production of prompt isolated photons at hadron colliders provides a stringent test of perturbative QCD and can be used to probe the proton structure. The ATLAS Collaboration has performed precise measurements of the inclusive production of isolated prompt photons at a centre-of-mass energy of 13 TeV, differential in both rapidity and photon transverse momentum. In addition, the integrated and differential cross sections for isolated photon pairs at 8 TeV have been measured. The results are compared with state-of-the-art theory predictions at NLO in QCD and with predictions of several MC generators. The production of prompt photons in association with jets provides an additional testing ground for perturbative QCD (pQCD) with a hard colourless probe less affected by hadronisation effects than jet production. The dynamics of isolated-photon plus jet production in pp collisions at a centre-of-mass energy of 8 and 13 TeV will be presented and discussed.

Long-term affected energy production of waste to energy technologies identified by use of energy system analysis.

Science.gov (United States)

Münster, M; Meibom, P

2010-12-01

Affected energy production is often decisive for the outcome of consequential life-cycle assessments when comparing the potential environmental impact of products or services. Affected energy production is however difficult to determine. In this article the future long-term affected energy production is identified by use of energy system analysis. The focus is on different uses of waste for energy production. The Waste-to-Energy technologies analysed include co-combustion of coal and waste, anaerobic digestion and thermal gasification. The analysis is based on optimization of both investments and production of electricity, district heating and bio-fuel in a future possible energy system in 2025 in the countries of the Northern European electricity market (Denmark, Norway, Sweden, Finland and Germany). Scenarios with different CO(2) quota costs are analysed. It is demonstrated that the waste incineration continues to treat the largest amount of waste. Investments in new waste incineration capacity may, however, be superseded by investments in new Waste-to-Energy technologies, particularly those utilising sorted fractions such as organic waste and refuse derived fuel. The changed use of waste proves to always affect a combination of technologies. What is affected varies among the different Waste-to-Energy technologies and is furthermore dependent on the CO(2) quota costs and on the geographical scope. The necessity for investments in flexibility measures varies with the different technologies such as storage of heat and waste as well as expansion of district heating networks. Finally, inflexible technologies such as nuclear power plants are shown to be affected. Copyright © 2010 Elsevier Ltd. All rights reserved.

Factors affecting oil palm production in Ondo state of Nigeria

African Journals Online (AJOL)

sola

... affecting oil palm production in predominantly oil palm producing areas of Ondo state of Nigeria. ... This was because the mangrove swamp zone does not .... Research stations e.g. NIFOR. Radio .... palm production management practices.

Factors Affecting Sugarcane Production in Pakistan

Directory of Open Access Journals (Sweden)

Adnan Nazir

2013-05-01

Full Text Available This study was undertaken to identify the factors affecting sugarcane production in Pakistan. Data were collected from 387 sugarcane growers from Sindh, Punjab and NWFP province. Data were collected during the period 2007-08. The study reveals that the costs of inputs of sugarcane i.e. urea, DAP, FYM, land preparation, seed and its application, weeding and cost of irrigation were the important factors which influenced on the returns of sugarcane growers. The effectiveness was examined by using the Cobb-Douglas production function; MVP and allocative efficiency were calculated. The coefficient of multiple determinations R2 was 0.9249, which indicated that 92% variation in the cost of inputs was explained by all explanatory variables and the adjusted R2 was 92%. The F-value was 666.94 and was highly significant at 5% level of significance, indicating that the regression model was well fitted. The high prices of inputs, low price of output, delay in payments and lack of scientific knowledge were the major problems in sugarcane production. In order to enhance the productivity of sugarcane in the country, government should solve the identified problems to increase the income of sugarcane growers.

Factors Affecting Oil Palm Production in Ondo State of Nigeria ...

African Journals Online (AJOL)

The discovery of crude oil and the civil war adversely affected oil palm production in Nigeria. This has resulted in scarcity and high cost of palm products and palm oil. The study therefore investigated the factors influencing oil palm production in Ondo State, Nigeria. One hundred and fifty respondents were selected from ...

Measurement of photon (also +jets) production cross sections, jets production cross sections and extraction of the strong coupling constant

CERN Document Server

Villaplana Perez, Miguel; The ATLAS collaboration

2017-01-01

The production of prompt isolated photons at hadron colliders provides a stringent test of perturbative QCD and can be used to probe the proton structure. The ATLAS collaboration has performed precise measurements of the inclusive production of isolated prompt photons at a centre-of-mass energy of 13 TeV, differential in both rapidity and the photon transverse momentum. In addition, the integrated and differential cross sections for isolated photon pairs and tri-photon production 8 TeV have been measured. The results are compared with state-of-the-art theory predictions at NLO in QCD and with predictions of several MC generators. The production of prompt photons in association with jets provides an additional testing ground for perturbative QCD (pQCD) with a hard colourless probe less affected by hadronisation effects than jet production. The ATLAS collaboration has studied the dynamics of isolated-photon production in association with gluon, light and heavy quark final states in pp collisions at a centre-of-...

Measuring Clinical Productivity.

Science.gov (United States)

Hudson, Mark E; Lebovitz, Evan E

2018-06-01

Productivity measurements have been used to evaluate and compare physicians and physician practices. Anesthesiology is unique in that factors outside anesthesiologist control impact opportunity for revenue generation and make comparisons between providers and facilities challenging. This article uses data from the multicenter University of Pittsburgh Physicians Department of Anesthesiology to demonstrate factors influencing productivity opportunity by surgical facility, between department divisions and subspecialties within multispecialty divisions, and by individuals within divisions. The complexities of benchmarking anesthesiology productivity are demonstrated, and the potential value of creating a productivity profile for facilities and groups is illustrated. Copyright © 2018 Elsevier Inc. All rights reserved.

Development of an instrument for direct ozone production rate measurements: measurement reliability and current limitations

Science.gov (United States)

Sklaveniti, Sofia; Locoge, Nadine; Stevens, Philip S.; Wood, Ezra; Kundu, Shuvashish; Dusanter, Sébastien

2018-02-01

Ground-level ozone (O3) is an important pollutant that affects both global climate change and regional air quality, with the latter linked to detrimental effects on both human health and ecosystems. Ozone is not directly emitted in the atmosphere but is formed from chemical reactions involving volatile organic compounds (VOCs), nitrogen oxides (NOx = NO + NO2) and sunlight. The photochemical nature of ozone makes the implementation of reduction strategies challenging and a good understanding of its formation chemistry is fundamental in order to develop efficient strategies of ozone reduction from mitigation measures of primary VOCs and NOx emissions. An instrument for direct measurements of ozone production rates (OPRs) was developed and deployed in the field as part of the IRRONIC (Indiana Radical, Reactivity and Ozone Production Intercomparison) field campaign. The OPR instrument is based on the principle of the previously published MOPS instrument (Measurement of Ozone Production Sensor) but using a different sampling design made of quartz flow tubes and a different Ox (O3 and NO2) conversion-detection scheme composed of an O3-to-NO2 conversion unit and a cavity attenuated phase shift spectroscopy (CAPS) NO2 monitor. Tests performed in the laboratory and in the field, together with model simulations of the radical chemistry occurring inside the flow tubes, were used to assess (i) the reliability of the measurement principle and (ii) potential biases associated with OPR measurements. This publication reports the first field measurements made using this instrument to illustrate its performance. The results showed that a photo-enhanced loss of ozone inside the sampling flow tubes disturbs the measurements. This issue needs to be solved to be able to perform accurate ambient measurements of ozone production rates with the instrument described in this study. However, an attempt was made to investigate the OPR sensitivity to NOx by adding NO inside the instrument

Note: How Does Product Proliferation Affect Responsiveness?

OpenAIRE

Diwakar Gupta; Mandyam M. Srinivasan

1998-01-01

In this note we consider some strategies that a manufacturing firm may use to deal with an increase in the variety of products it offers. We indicate how alternate strategies for dealing with product proliferation impact the firm's responsiveness, measured in terms of average production lead time and average work-in-process inventory. Focusing on the make-to-order environment and using queueing models, we derive conditions under which an increase in product variety can improve both individual...

Product Meaning, Affective Use Evaluation, and Transfer: A Preliminary Study

Directory of Open Access Journals (Sweden)

Sacha Helfenstein

2005-01-01

Full Text Available The first part of this investigation explored the multidimensional nature of product meaning, referring to the variety of connotations and functions a consumer associates with a particular product category. The subsequent experiment examined the moderation effects of product meaning and other attributes of the user on (a the affective evaluation of an obstructed use interaction, and (b the transfer of emotion between devices presented as being either of the same or a different brand. Although the failure experience essentially caused frustration, this reaction varied substantially among consumers depending on product meaning, age, and gender. The results also showed that the emotion dimensions of pleasure, arousal, and dominance were affected in distinct ways, and that, in addition to the consumer variables, transfer was mainly dependent on the brand relation. Nevertheless, user frustration did not cause general brand aversion, indicating that poor designs do not unconditionally threaten the customer relationship.

Identifying Usability and Productivity Dimensions for Measuring the Success of Mobile Business Services

Directory of Open Access Journals (Sweden)

Maiju Vuolle

2008-01-01

Full Text Available This paper reviews existing measures used for evaluating the usability of information systems and those used for evaluating the level of the productivity of a company. We discuss the usefulness of the existing measures in the mobile business context, where both mobility and work-context pose specific demands for the mobile business services. The review showed that the existing measures rarely consider the great contextual variation caused by the mobility of the services and the demands this poses on usability; which, in turn, affects productivity. To build a measurement tool that better meets the requirements of mobile business services, we completed case studies on two mobile business services, one used in passenger transport and the other in construction sites. Based on the understanding gained from the case studies, we propose a list of dimensions and items addressing both usability and productivity aspects that work as the basis for a multidisciplinary measurement tool.

How do strategic decisions and operative practices affect operating room productivity?

Science.gov (United States)

Peltokorpi, Antti

2011-12-01

Surgical operating rooms are cost-intensive parts of health service production. Managing operating units efficiently is essential when hospitals and healthcare systems aim to maximize health outcomes with limited resources. Previous research about operating room management has focused on studying the effect of management practices and decisions on efficiency by utilizing mainly modeling approach or before-after analysis in single hospital case. The purpose of this research is to analyze the synergic effect of strategic decisions and operative management practices on operating room productivity and to use a multiple case study method enabling statistical hypothesis testing with empirical data. 11 hypotheses that propose connections between the use of strategic and operative practices and productivity were tested in a multi-hospital study that included 26 units. The results indicate that operative practices, such as personnel management, case scheduling and performance measurement, affect productivity more remarkably than do strategic decisions that relate to, e.g., units' size, scope or academic status. Units with different strategic positions should apply different operative practices: Focused hospital units benefit most from sophisticated case scheduling and parallel processing whereas central and ambulatory units should apply flexible working hours, incentives and multi-skilled personnel. Operating units should be more active in applying management practices which are adequate for their strategic orientation.

Top quark production cross-section measurements

CERN Document Server

Chen, Ye; The ATLAS collaboration

2017-01-01

Measurements of the inclusive and differential cross-sections for top-quark pair and single top production cross sections in proton-proton collisions with the ATLAS detector at the Large Hadron Collider are presented at center-of-mass energies of 8 TeV and 13 TeV. The inclusive measurements reach high precision and are compared to the best available theoretical calculations. These measurements, including results using boosted tops, probe our understanding of top-pair production in the TeV regime. The results are compared to Monte Carlo generators implementing LO and NLO matrix elements matched with parton showers and NLO QCD calculations. For the t-channel single top measurement, the single top-quark and anti-top-quark total production cross-sections, their ratio, as well as differential cross sections are also presented. A measurement of the production cross-section of a single top quark in association with a W boson, the second largest single-top production mode, is also presented. Finally, measurements of ...

Measuring healthcare productivity - from unit to system level.

Science.gov (United States)

Kämäräinen, Vesa Johannes; Peltokorpi, Antti; Torkki, Paulus; Tallbacka, Kaj

2016-04-18

Purpose - Healthcare productivity is a growing issue in most Western countries where healthcare expenditure is rapidly increasing. Therefore, accurate productivity metrics are essential to avoid sub-optimization within a healthcare system. The purpose of this paper is to focus on healthcare production system productivity measurement. Design/methodology/approach - Traditionally, healthcare productivity has been studied and measured independently at the unit, organization and system level. Suggesting that productivity measurement should be done in different levels, while simultaneously linking productivity measurement to incentives, this study presents the challenges of productivity measurement at the different levels. The study introduces different methods to measure productivity in healthcare. In addition, it provides background information on the methods used to measure productivity and the parameters used in these methods. A pilot investigation of productivity measurement is used to illustrate the challenges of measurement, to test the developed measures and to prove the practical information for managers. Findings - The study introduces different approaches and methods to measure productivity in healthcare. Practical implications - A pilot investigation of productivity measurement is used to illustrate the challenges of measurement, to test the developed measures and to prove the practical benefits for managers. Originality/value - The authors focus on the measurement of the whole healthcare production system and try to avoid sub-optimization. Additionally considering an individual patient approach, productivity measurement is examined at the unit level, the organizational level and the system level.

Forest amount affects soybean productivity in Brazilian agricultural frontier

Science.gov (United States)

Rattis, L.; Brando, P. M.; Marques, E. Q.; Queiroz, N.; Silverio, D. V.; Macedo, M.; Coe, M. T.

2017-12-01

Over the past three decades, large tracts of tropical forests have been converted to crop and pasturelands across southern Amazonia, largely to meet the increasing worldwide demand for protein. As the world's population continue to grow and consume more protein per capita, forest conversion to grow more crops could be a potential solution to meet such demand. However, widespread deforestation is expected to negatively affect crop productivity via multiple pathways (e.g., thermal regulation, rainfall, local moisture, pest control, among others). To quantify how deforestation affects crop productivity, we modeled the relationship between forest amount and enhanced vegetation index (EVI—a proxy for crop productivity) during the soybean planting season across southern Amazonia. Our hypothesis that forest amount causes increased crop productivity received strong support. We found that the maximum MODIS-based EVI in soybean fields increased as a function of forest amount across three spatial-scales, 0.5 km, 1 km, 2 km, 5 km, 10 km, 15 km and 20 km. However, the strength of this relationship varied across years and with precipitation, but only at the local scale (e.g., 500 meters and 1 km radius). Our results highlight the importance of considering forests to design sustainable landscapes.

Product meaning, affective use evaluation, and transfer : a preliminary study

OpenAIRE

Helfenstein, Sacha

2005-01-01

The first part of this investigation explored the multidimensional nature of product meaning, referring to the variety of connotations and functions a consumer associates with a particular product category. The subsequent experiment examined the moderation effects of product meaning and other attributes of the user on (a) the affective evaluation of an obstructed use interaction, and (b) the transfer of emotion between devices presented as being either of the same or a different brand. Althou...

How the Physical Work Environment Can Affect Individual Productivity

OpenAIRE

Johannsdottir, Thordis; Hansen, Rebecca

2017-01-01

Master's thesis in Strategic Management The topic of this thesis is about how the physical work environment affects individual productivity, and with focus on productivity through the well-being aspect of individuals. The thesis has a theoretical approach with a pilot-exercise including a pilot experiment and questionnaire. This approach was chosen as the research question is comprehensive, and with the timeframe to complete this thesis. A theoretical approach gives the possibility to furt...

Advances on the Measure of Judgment and Meaning of the Product for Brazil

Directory of Open Access Journals (Sweden)

Solange Alfinito

2012-09-01

Full Text Available The purpose of this paper was the development a measure of judgment and meaning of the product valid for Brazilian consumers. It consisted in a two-stage study including both qualitative and quantitative approaches. In the qualitative stage, focus groups with 16 Brazilian participants allowed the generation of 40 items for a new scale of judgment and meaning of the product. After semantic validation and expert analysis, the found items composed a questionnaire administered to 684 participants in a paper-and-pencil survey. Results suggest that the items performed considerably better when compared to the previous version, indicating their potential of usage not only in Brazil, but also in other countries. The final measure remained with 20 items that were distributed in four factors, as pointed by the literature review. Two factors are related to judgment types (piecemeal and affective, whilst the other two are related to meaning types (utilitarian and symbolic. Additional results, as expected, showed that product's utilitarian meaning is positively correlated to a piecemeal judgment, whereas symbolic meaning is positively related to affective judgment. Managerial implications for marketing, and future research directions are proposed.

Estimating product-to-product variations in metal forming using force measurements

NARCIS (Netherlands)

Havinga, Gosse Tjipke; Van Den Boogaard, Ton

2017-01-01

The limits of production accuracy of metal forming processes can be stretched by the development of control systems for compensation of product-to-product variations. Such systems require the use of measurements from each semi-finished product. These measurements must be used to estimate the final

Measuring and improving productivity in general radiology.

Science.gov (United States)

Wilt, Michelle A; Miranda, Rafael; Johnson, C Daniel; Love, Peggy Sue

2010-10-01

The aim of this study was to determine a method of measuring productivity among general radiographers in a moderate-sized hospital and to improve and sustain productivity within that work area. The average times needed to perform the 13 most common examinations were measured. Performance of the various examinations was tracked and multiplied by the time allocated per procedure; this measure was divided by the length of the work shift to determine productivity. Productivity measures were shared among the work group, and decisions to improve productivity (eg, whether to fill open positions) were made by group members. Average time spent per examination type was calculated (range, 10 minutes to 1 hour 16 minutes). At baseline (February 2008), group productivity was 50%. Productivity increased during the first year of monitoring and was sustained through November 2009 (productivity range, 57%-63%). Yearly savings from not filling open positions were estimated to be $174,000. Productivity in a general radiology work area can be measured. Consensus among the work group helped increase productivity and assess progress. This methodology, if widely adopted, could be standardized and used to compare productivity across departments and institutions. Copyright © 2010 American College of Radiology. Published by Elsevier Inc. All rights reserved.

b-Production measurements with ATLAS

International Nuclear Information System (INIS)

Robins, Simon

2001-01-01

The Large Hadron Collider at CERN will produce b-hadrons with unprecedentedly high statistics, and with a higher energy reach than any previous machine. The ATLAS detector will offer excellent acceptance and performance for b physics studies and will make high statistics measurements of b-quark production to probe QCD. ATLAS can contribute to an understanding of the large discrepancy seen between the QCD prediction and Tevatron cross-section measurements. Measurements will be made of the absolute and differential production cross-sections. Measurements of bb-bar correlations will be made to test the NLO contributions to the cross-section and to place limits on non-perturbative effects

The Benefish consortium 24 month report WP6: productivity modelling of OWI's and welfare intervention measures

OpenAIRE

Schneider, O.; Schram, E.; Noble, C.

2009-01-01

In order to accurately model all costs and benefits associated with welfare interventions for farmed fish it is necessary to establish how any welfare actions affect productivity. Productivity modelling within Benefish has been conducted in WP6. WP6 aimed to model relationships between welfare interventions, changes in OWI’s and measures of productivity. It did so focusing only on the effects which were biological in nature: economic costs and benefits attributed to changes in productivity ar...

Measurement of charmonium production in heavy-ion collisions with the ATLAS detector

CERN Document Server

AUTHOR|(INSPIRE)INSPIRE-00511724; The ATLAS collaboration

2017-01-01

The suppression of heavy charmonia states in heavy-ion collisions is a phenomenon understood as a consequence of quark gluon plasma formation in the hot, dense system formed in heavy ion collisions at the LHC. In addition to hot matter effects in heavy-ion collisions, cold nuclear effects may also affect heavy charmonia production. Therefore, a full assessment requires detailed studies on the effects present in both A+A and p+A collisions. Based on p+Pb data collected in 2013 and pp and Pb+Pb data collected in 2015 at the LHC, the ATLAS experiment has studied prompt and non-prompt $J/\\psi$ and $\\psi$(2S) productions via the dimuon decay final states. The production and excited-to-ground state ratios of heavy charmonia measured in both p+Pb and Pb+Pb collision data with respect to that measured in pp collision data will be presented in intervals of transverse momentum, rapidity and centrality.

"Productivity performance measurement - follow-up"

DEFF Research Database (Denmark)

Kristensen, Troels

2008-01-01

The Danish Ministry of Health has published the third annual report on hospital productivity. This experience has contributed to policy goals becoming more detailed and ambitious. New policy goals are: to include hospital productivity measures at less aggregated levels, to include labour producti...... productivity and hospital psychiatric care, to provide web-based solutions that facilitate access to productivity data, and to develop new classifications of hospital levels related to structural reforms....

Performance Measurement in Global Product Development

DEFF Research Database (Denmark)

Taylor, Thomas Paul; Ahmed-Kristensen, Saeema

2013-01-01

there is a requirement for the process to be monitored and measured relative to the business strategy of an organisation. It was found that performance measurement is a process that helps achieve sustainable business success, encouraging a learning culture within organisations. To this day, much of the research into how...... performance is measured has focussed on the process of product development. However, exploration of performance measurement related to global product development is relatively unexplored and a need for further research is evident. This paper contributes towards understanding how performance is measured...

Partial Sleep Deprivation Attenuates the Positive Affective System: Effects Across Multiple Measurement Modalities.

Science.gov (United States)

Finan, Patrick H; Quartana, Phillip J; Remeniuk, Bethany; Garland, Eric L; Rhudy, Jamie L; Hand, Matthew; Irwin, Michael R; Smith, Michael T

2017-01-01

Ample behavioral and neurobiological evidence links sleep and affective functioning. Recent self-report evidence suggests that the affective problems associated with sleep loss may be stronger for positive versus negative affective state and that those effects may be mediated by changes in electroencepholographically measured slow wave sleep (SWS). In the present study, we extend those preliminary findings using multiple measures of affective functioning. In a within-subject randomized crossover experiment, we tested the effects of one night of sleep continuity disruption via forced awakenings (FA) compared to one night of uninterrupted sleep (US) on three measures of positive and negative affective functioning: self-reported affective state, affective pain modulation, and affect-biased attention. The study was set in an inpatient clinical research suite. Healthy, good sleeping adults (N = 45) were included. Results indicated that a single night of sleep continuity disruption attenuated positive affective state via FA-induced reductions in SWS. Additionally, sleep continuity disruption attenuated the inhibition of pain by positive affect as well as attention bias to positive affective stimuli. Negative affective state, negative affective pain facilitation, nor negative attention bias were altered by sleep continuity disruption. The present findings, observed across multiple measures of affective function, suggest that sleep continuity disruption has a stronger influence on the positive affective system relative to the negative affective affective system. © Sleep Research Society 2016. Published by Oxford University Press on behalf of the Sleep Research Society. All rights reserved. For permissions, please e-mail journals.permissions@oup.com.

Measurement of quarkonia production in heavy-ion collisions with the ATLAS detector

CERN Document Server

Tapia Araya, Sebastian; The ATLAS collaboration

2017-01-01

The suppression of heavy quarkonia states in heavy-ion collisions is a phenomenon understood as a consequence of QGP formation in the hot, dense system formed in heavy-ion collisions at the LHC. In addition to hot matter effects in heavy-ion collisions , cold nuclear effects may also affect quarkonia production . Therefore, a full assessment requires detailed studies on the effects present in both A-A and p+A collisions. Based on p+Pb data collected in 2013 and pp and Pb+Pb data collected in 2015 at the LHC, the ATLAS experiment has studied prompt and non-prompt J/psi and psi(2S) productions as well as Upsilon production via the di-muon decay final states. The results are of the various measurements are discussed.

Measurement of quarkonia production in heavy-ion collisions with the ATLAS detector

CERN Document Server

Kremer, Jakub Andrzej; The ATLAS collaboration

2017-01-01

The suppression of heavy quarkonia states in heavy-ion collisions is a phenomenon understood as a consequence of QGP formation in the hot, dense system formed in heavy-ion collisions at the LHC. In addition to hot matter effects in heavy-ion collisions, cold nuclear effects may also affect quarkonia production. Therefore, a full assessment requires detailed studies on the effects present in both A-A and p+A collisions. Based on p+Pb data collected in 2013 and pp and Pb+Pb data collected in 2015 at the LHC, the ATLAS experiment has studied prompt and non-prompt J/psi and psi(2S) productions as well as Upsilon production via the di-muon decay final states. The results of the various measurements are discussed

Parameters affecting level measurement interpretation of nuclear fuel solutions

International Nuclear Information System (INIS)

Hunt, B.A.; Landat, D.A.

1999-01-01

This paper describes a level measurement technique commonly used in the measurement of radioactive liquids and equipment utilised by the inspectors for safeguards purposes. Some of the influencing parameters affecting the measurement results by this technique are characterised. An essential requisite for successful process operations in chemical facilities involving liquids generally require some physical measurements to be made in-line for both process and quality control in order to achieve the necessary final product specifications . In nuclear fuel reprocessing facilities, the same objectives apply coupled however with an additional requirement of achieving nuclear material accountancy and control. In view of the strategic importance of some of the process vessels in nuclear facilities, accountancy has to be supported by volume and density measurements of low uncertainty. Inspectors therefore require instruments which are at the very least as good as or better than operator's equipment. The classical measurement technique and most widely applied for process liquids in nuclear installations is the bubbler probe or dip-tube technique. Here a regulated flow of air passes through tubes inserted to various depths into the vessel and pressure readings are measured which are a function of the presence of liquid height and density of solution in the tank. These readings, taken together with a pre-determined calibration curve are sufficient for the volume and amount of liquor in a tank to be quantified. All measurement equipment and instrumentation are long distances from the tank environment. The key physical parameter to measure at this location is therefore pressure. Equipment designed developed, commissioned and tested in the tank measurement facilities at Ispra and in nuclear installations in Europe, Japan and the USA, house digital pressure transducer modules with manufacture's declared features of better than 0.01% accuracy and long term stability of 0.01% full

Aspergillus oryzae nrtA affects kojic acid production.

Science.gov (United States)

Sano, Motoaki

2016-09-01

We analyzed the role of the nitrate transporter-encoding gene (nrtA) of Aspergillus oryzae by gene disruption. Southern hybridization analysis indicated that homologous recombination occurred at the resident nrtA locus. Real-time PCR showed that the nrtA gene was strongly inducible by NaNO3. The nrtA disruptant did not exhibit normal growth when nitrate was available as the sole nitrogen source. These results indicate that NrtA is essential for nitrate uptake in A. oryzae. Kojic acid (KA) production was inhibited by the addition of a small amount of sodium nitrate. The nrtA-disrupted strain was deficient in the uptake of nitrate. As a result, KA production in this strain was not considerably affected by the presence of nitrate.

Measurement of photon production cross sections also in association with jets with the ATLAS detector

CERN Document Server

Tassi, Enrico; The ATLAS collaboration

2017-01-01

The production of prompt isolated photons at hadron colliders provides a stringent test of perturbative QCD and can be used to probe the proton structure. The ATLAS collaboration has performed precise measurements of the inclusive production of isolated prompt photons at a center-of-mass energy of 13 TeV, differential in both rapidity and the photon transverse momentum. In addition, the integrated and differential cross sections for isolated photon pairs and tri-photon production 8 TeV have been measured. The results are compared with state-of-the-art theory predictions at NLO in QCD and with predictions of several MC generators. The production of prompt photons in association with jets provides an additional testing ground for perturbative QCD (pQCD) with a hard colourless probe less affected by hadronisation effects than jet production. The ATLAS collaboration has studied the dynamics of isolated-photon production in association with gluon, light and heavy quark final states in pp collisions at a centre-of-...

Factors affecting sustainable dairy production: A case study from Uva Province of Sri Lanka

Science.gov (United States)

Wijethilaka, D.; De Silva, S.; Deshapriya, R. M. C.; Gunaratne, L. H. P.

2018-05-01

Dairy farming has been playing a key role by improving household incomes and food security for rural communities in Sri Lanka. Nevertheless, it has failed to meet the expected self-sufficiency. In 2015, Sri Lanka imported 51percent of the national milk requirement spending US 251 million from its debt-ridden economy. This paper aims to analyse socio-economic characteristics of dairy farmers and factors affecting dairy production efficiency in the Uva Province of Sri Lanka, a highly potential area comprising all the dairy value chain actors. Surveyed was conducted to farmers, key informants from input suppliers, collectors, transporters, processors, sellers and support service providers. Result revealed that intensive farmer’s milk yields per cow was only 7.97 L/day, which was 35% and 60% higher than the yields of semi-intensive and extensive farmers respectively. The highest profit of Rs. 53.30 per litre was earned by extensive farmers, whereas it was Rs. 47.63 for semi-intensive and Rs. 44.76 for intensive farmers respectively if family labour cost was not taken into the account. The Technical Efficiency Analysis revealed that 37.1% and 20% milk production of intensive farmers and semi-intensive is being loss due to inefficiency and could be increased without any additional inputs. The main factors affecting efficiency in milk production included farmers’ socio-economic characteristics and farm characteristics. Based on the results it can be concluded that sustainability dairy production depends on farmer training, collectivizing farmers into farmer societies, culling unproductive male animals, increasing the availability and access to AI/other breading programs and low-cost quality concentrate feed and other supplements, and, thus appropriate measures should be taken to provide these conditions if Sri Lanka aims to achieve self-sufficiency in milk production.

ASSESMENT OF FACTORS AFFECTING THE PRODUCTIVITY OF AMBER CHARKHA AND ERGONOMIC EVALUATION OF WORKERS

OpenAIRE

G. V. THAKRE; S. G. PATIL; D. N. AGRAWAL

2011-01-01

Increasing demands of the cotton fabrics, now a day has made it necessary to increase the production of cotton fabrics. To increase the production it is necessary to study the factors affecting the performance of the women workers working on Amber charkha. Most of the Amber charkha in rural areas are hand operated (i.e. they runwith the help of human energy input). There are various medical, technical and environmental factors which affect the productivity of women workers working on Amber ch...

Atypical Food Packaging Affects The Persuasive Impact of Product Claims

NARCIS (Netherlands)

van Ooijen, M.L.; Fransen, P.W.J.; Verlegh, P.W.J.; Smit, E.G.

2016-01-01

Atypical food packaging draws attention in the retail environment, and therefore increases product salience. However, until now, no research has focused on how atypical packaging affects the persuasive impact of other food information. In the present study, we propose that atypical packaging

Atypical food packaging affects the persuasive impact of product claims

NARCIS (Netherlands)

van Ooijen, I.; Fransen, M.L.; Verlegh, P.W.J.; Smit, E.G.

Atypical food packaging draws attention in the retail environment, and therefore increases product sal- ience. However, until now, no research has focused on how atypical packaging affects the persuasive impact of other food information. In the present study, we propose that atypical packaging

ATLAS measurements of vector boson production

CERN Document Server

Vittori, Camilla; The ATLAS collaboration

2016-01-01

Measurements of the Drell­Yan production of W and Z/gamma* bosons at the LHC provide a benchmark of our understanding of perturbative QCD and probe the proton structure in a unique way. The ATLAS collaboration has performed new high precision measurements at center­of­mass energies of 8 and 13 TeV. In the 8 TeV data, we present recent measurements in the di­lepton mass range up to the TeV scale, double­differentially in dilepton mass and rapidity(­separation). The measurements are compared to state­of­the­art calculations at NNLO in QCD and constrain the photon content of the proton. First precise inclusive measurements of W and Z production at 13 TeV are presented. W/Z and W charge ratios profit from a cancellation of experimental uncertainties. The angular distributions of the Drell­Yan lepton pairs around the Z­boson mass peak probe the underlying QCD dynamic of the Z­boson production mechanisms. We present a measurement of the complete set of angular coefficients describing these distributions...

Influence of Expectation Measure on the Sensory Acceptance of Petit Suisse Product.

Science.gov (United States)

Teixeira Lopes, Maria Micheline; Passos Rodrigues, Maria do Carmo; Souza de Araújo, Ana Maria

2018-03-01

The consumer's expectation has an important role in the consumption of food products. It is one of the factors that influence the perception of sensory attributes and interact with the physiological, behavioral and cognitive factors influencing consumer decisions. The present study aimed to analyze the influence of consumer's expectations on the acceptance of Petit Suisse. Products of 4 different brands were used for the sensory analysis, 2 international brands and 2 regional ones. The 9-point regular hedonic scale was employed to carry out affective sensory and expectation measure tests (with and without product information). Concerning the present research, photos of the packaging of each product were printed in color and presented to the participants. These photos displayed the following pieces of information: the product brand, pictures, colors, product name, nutritional information and date of manufacture. International samples obtained higher grades when presented with their packaging, and obtained lower values both in the blind test and in the real expectation test evaluation. It can be concluded that the sensory analysis of the expectation measure showed that the brand influences the acceptance of the product, for the consumer's expectations for international brands had positively confirmed and disconfirmed acceptance. This study generated a significant contribution, especially for companies that aim for a wider market. The application of sensory analysis with a focus on expectation measure, it shows that the brand determines the purchase, based on the results of this study. Therefore, the product's visual identity must be invested in; it must arouse children and adults' attention. That is, it reinforces that the image of the product, the label and what it arouses in the consumers are extremely important for the final choice. © 2018 Institute of Food Technologists®.

Productive Love Promotion Via Affective Technology: An Approach Based On Social Psychology And Philosophy

Directory of Open Access Journals (Sweden)

Ramon Solves Pujol

2010-01-01

Full Text Available This paper proposes the use of social psychological and philosophical foundations for designing affective technology that promotes the experience of love. The adopted theoretical basis is the concept of productive love, which is heavily based on Enrich Fromm but also includes theories and scientific findings of numerous psychoanalysts, social psychologists, and philosophers. We conducted a review of the theory about the nature of love and found that social psychological and philosophical approaches differ regarding peoples' understandings. The findings were used to elaborate eight principles of productive love. Based on these principles, we derived criteria for designing affective technology when the objective is to promote productive love. We reviewed the existent studies on affective technologies and implemented the criteria into a system design, the Pictures' Call. A prototype of the system was pretested to illustrate how productive love technology could be based on established criteria.

Fixed target hadron production measurements

CERN Document Server

Panman, J

2009-01-01

The knowledge of light hadron production cross-sections in proton-nucleus interactions is an important prerequisite to the analysis of a wide variety of experiments. One of the important limiting factors for the precision of accelerator based and atmospheric neutrino oscillation experiments is the uncertainty in the composition and spectrum of the neutrino flux. Cosmic-ray experiments detecting extensive air-showers can greatly improve their ability to interpret the data when precise hadron production spectra are available over a large range of energies. Dedicated hadron production experiments have been taking data recently and are now publishing their results. Other experiments have just started their data-taking and plan to supply measurements which can significantly extend the kinematic range in which data will be available. Early measurements at the LHC can extend this range to much higher energies than available up to now. Recent results will be shown and compared with hadronic production models. An outl...

Measurement of Ozone Production Sensor

Directory of Open Access Journals (Sweden)

M. Cazorla

2010-05-01

Full Text Available A new ambient air monitor, the Measurement of Ozone Production Sensor (MOPS, measures directly the rate of ozone production in the atmosphere. The sensor consists of two 11.3 L environmental chambers made of UV-transmitting Teflon film, a unit to convert NO₂ to O₃, and a modified ozone monitor. In the sample chamber, flowing ambient air is exposed to the sunlight so that ozone is produced just as it is in the atmosphere. In the second chamber, called the reference chamber, a UV-blocking film over the Teflon film prevents ozone formation but allows other processes to occur as they do in the sample chamber. The air flows that exit the two chambers are sampled by an ozone monitor operating in differential mode so that the difference between the two ozone signals, divided by the exposure time in the chambers, gives the ozone production rate. High-efficiency conversion of NO₂ to O₃ prior to detection in the ozone monitor accounts for differences in the NO_x photostationary state that can occur in the two chambers. The MOPS measures the ozone production rate, but with the addition of NO to the sampled air flow, the MOPS can be used to study the sensitivity of ozone production to NO. Preliminary studies with the MOPS on the campus of the Pennsylvania State University show the potential of this new technique.

Measuring multifactor productivity growth

Czech Academy of Sciences Publication Activity Database

Wölfl, A.; Hájková, Dana

-, 2007/5 (2007), s. 1-45 Institutional research plan: CEZ:AV0Z70850503 Keywords : multifactor productivity growth * GDP growth * measuring Subject RIV: AH - Economics http://www.oecd.org/dataoecd/61/17/39522985.pdf

40 CFR 63.5985 - What are my alternatives for meeting the emission limits for tire production affected sources?

Science.gov (United States)

2010-07-01

... the emission limits for tire production affected sources? 63.5985 Section 63.5985 Protection of... Pollutants: Rubber Tire Manufacturing Emission Limits for Tire Production Affected Sources § 63.5985 What are my alternatives for meeting the emission limits for tire production affected sources? You must use...

Methyl salicylate production in tomato affects biotic interactions.

Science.gov (United States)

Ament, Kai; Krasikov, Vladimir; Allmann, Silke; Rep, Martijn; Takken, Frank L W; Schuurink, Robert C

2010-04-01

The role of methyl salicylate (MeSA) production was studied in indirect and direct defence responses of tomato (Solanum lycopersicum) to the spider mite Tetranychus urticae and the root-invading fungus Fusarium oxysporum f. sp. lycopersici, respectively. To this end, we silenced the tomato gene encoding salicylic acid methyl transferase (SAMT). Silencing of SAMT led to a major reduction in SAMT expression and MeSA emission upon herbivory by spider mites, without affecting the induced emission of other volatiles (terpenoids). The predatory mite Phytoseiulus persimilis, which preys on T. urticae, could not discriminate between infested and non-infested SAMT-silenced lines, as it could for wild-type tomato plants. Moreover, when given the choice between infested SAMT-silenced and infested wild-type plants, they preferred the latter. These findings are supportive of a major role for MeSA in this indirect defence response of tomato. SAMT-silenced tomato plants were less susceptible to a virulent strain of F. oxysporum f. sp. lycopersici, indicating that the direct defense responses in the roots are also affected in these plants. Our studies show that the conversion of SA to MeSA can affect both direct and indirect plant defence responses.

Productivity measurement in the presence of externalities: An example from the electric power industry

Science.gov (United States)

Chaston, Kelly Ann

Traditional productivity measures have ensured that environmental regulations were seen as deterrents to productivity growth. Such measures are constructed in a manner which make this conclusion inevitable. Traditional productivity measures include the regulation-induced additions to inputs, whether qualitatively or quantitatively, while continuing to ignore the value of the pollution emitted. The measure proposed in this thesis is derived formally from a model of social welfare. With the exception of 'prices' for emitted pollutants, for which marginal damage estimates will proxy, the proposed measure relies upon market prices, which are then incorporated into a conventional Divisia framework. Data from the electricity generation industry are used to construct both the conventional and newly proposed TFP growth rates. The industry provides an ideal framework within which this growth measure can be tested. It is a large industry that affects a majority of society as it is both consumed as a final good and pervasively used as an intermediate good. The industry is also a large polluter. On an annual basis it has been responsible for approximately one-third of the emissions of carbon-dioxide, one-third of the emissions of nitrous oxides, and two-thirds of the sulfur dioxides emissions, nationally. Furthermore, performance of the proposed measure across various samples was allowed by the diversity of utilities in the industry both with respect to location and fuel mix. Incorporating the value of externalities results in a productivity growth measure which is substantially improved. The difference in calculated productivity gains between the two measures is shown to be sizable under a number of circumstances. As well, the empirical analysis offers some general lessons as to the treatment of various pollutants--it is clearly demonstrated that movement in one pollutant cannot be used to proxy movements in others, or be used as an indicator as to the bias of traditional TFP

Beyond Research Productivity: Matching Productivity Measures to Institutional Mission

Directory of Open Access Journals (Sweden)

Patricia Bartholomew

2016-11-01

Full Text Available Aim/Purpose: The aim of this paper is to develop a unified methodology inclusive of the three primary areas of faculty responsibility (teaching, research, and service to calculate departmental productivity that fills the gap in methodological bench-marking tools for overall faculty productivity. Background:\tA disproportionate number of departmental and faculty productivity indices in higher education rely solely on research. Productivity in other areas of faculty workload areas, like teaching and institutional and community service, are either measured separately or ignored all together – even when those activities are institutionally mandated. This does a disservice to those who work in those institutions and skews incentives. Methodology: This paper utilizes a unified methodology inclusive of the three primary areas of faculty responsibility (teaching, research, and service to calculate depart-mental productivity in five disparate departments (English, Biology, Mathematics, Sociology, and Computer Science common to two universities with differing missions (teaching and service. Findings: The results reveal the bias inherent in relying solely on research as a proxy for overall productivity in institutions that have differing missions. Recommendations for Practitioners: Utilizing better metrics informs higher education administrators, promotes better decision-making, and allows incentives to re-align with desired outcomes. Recommendation for Researchers: This paper recommends combing all aspects of faculty workload into a single benchmark index to better measure departmental productivity. Future Research: Further research into improving this simple index is warranted and would include how to account for quality and other facets of productivity.

ATLAS measurements of vector boson production

CERN Document Server

Levchenko, M; The ATLAS collaboration

2014-01-01

ATLAS measurements of vector boson production with associated jets Productions of light and heavy-flavour jets in association with a W or a Z boson in proton-proton collisions are important processes to study QCD in multi-scale environments and the proton parton content. The cross section, differential in several kinematics variables, have been measured with the ATLAS detector in 7 TeV proton-proton collisions and compared to high-order QCD calculations and Monte Carlo simulations. The results demonstrate the need for the inclusion of high-multiplicity matrix elements in the calculations of high jet multiplicities. The ratio of (Z+jets)/(W+jets) provides a precise test of QCD due to the large cancellations of theoretical and experimental uncertainties. Measurement of W+c production cross section has a unique sensitivity to the strange-quark density, which is poorly known at low x. W or Z boson production in association with b-quark jets, on the other hand, probes the b-quark density in the proton and the b-qu...

Measurement of quarkonia production in heavy-ion collisions with the ATLAS detector

CERN Document Server

Kremer, Jakub Andrzej; The ATLAS collaboration

2017-01-01

The suppression of heavy quarkonia states in heavy-ion collisions is a phenomenon understood as a consequence of QGP formation in the hot, dense system formed in nucleus-nucleus collisions at the LHC. In addition to hot matter effects in heavy-ion collisions, cold nuclear effects may also affect quarkonia production. Therefore, a full assessment requires detailed studies on the effects present in both A+A and $\\textit{p}$+A collisions. Based on $\\textit{p}$+Pb data collected in 2013 and $\\textit{pp}$ and Pb+Pb data collected in 2015 at the LHC, the ATLAS experiment has studied prompt and non-prompt $J/\\psi$ and $\\psi\\left(2\\mathrm{S}\\right)$ productions as well as $\\Upsilon\\left(n\\mathrm{S}\\right)$ production via the di-muon decay final states. The results of the various measurements are discussed.

Transaction costs and social networks in productivity measurement

DEFF Research Database (Denmark)

Henningsen, Geraldine; Henningsen, Arne; Henning, Christian H. C. A.

2015-01-01

and support. Hence, we use measures of a firm’s access to social networks as a proxy for the transaction costs the firm faces. We develop a microeconomic production model that takes into account transaction costs and networks. Using a data set of 384 Polish farms, we empirically estimate this model......We argue that in the presence of transaction costs, observed productivity measures may in many cases understate the true productivity, as production data seldom distinguish between resources entering the production process and resources of a similar type that are sacrificed for transaction costs....... Hence, both the absolute productivity measures and, more importantly, the productivity ranking will be distorted. A major driver of transaction costs is poor access to information and contract enforcement assistance. Social networks often catalyse information exchange as well as generate trust...

Adaptive Measures for the Factors Affecting Marketing of Coffee ...

African Journals Online (AJOL)

Adaptive Measures for the Factors Affecting Marketing of Coffee ( Coffea robusta ... of coffee in the study area was poor pricing and marketing systems; this is as a ... of quality control and relevant information on improved coffee technologies.

Why measure radon decay products?

International Nuclear Information System (INIS)

Rolle, R.; Lettner, H.

1997-01-01

Combined development in spectrometry, instrumentation and ventilation modelling with its dependence on short- and long-term weather fluctuations renders possible a new, economical metrology for radon decay products. Short-term measurements can, with few restrictions, be converted to annual exposures of an accuracy superior to that from conventional medium-term Rn gas measurements. (orig.) [de

Long-term affected energy production of waste to energy technologies identified by use of energy system analysis

DEFF Research Database (Denmark)

Münster, Marie; Meibom, Peter

2010-01-01

Affected energy production is often decisive for the outcome of consequential life-cycle assessments when comparing the potential environmental impact of products or services. Affected energy production is however difficult to determine. In this article the future long-term affected energy...... production is identified by use of energy system analysis. The focus is on different uses of waste for energy production. The Waste-to-Energy technologies analysed include co-combustion of coal and waste, anaerobic digestion and thermal gasification. The analysis is based on optimization of both investments...... and production of electricity, district heating and bio-fuel in a future possible energy system in 2025 in the countries of the Northern European electricity market (Denmark, Norway, Sweden, Finland and Germany). Scenarios with different CO2 quota costs are analysed. It is demonstrated that the waste...

29 CFR 784.138 - Perishable state of the aquatic product as affecting exemption.

Science.gov (United States)

2010-07-01

... with the performance of exempt operations on the aquatic forms of animal and vegetable life mentioned... or manufacturing operations on products previously rendered nonperishable, such as refining fish oil... 29 Labor 3 2010-07-01 2010-07-01 false Perishable state of the aquatic product as affecting...

Spatial pattern affects diversity-productivity relationships in experimental meadow communities

Science.gov (United States)

Lamošová, Tereza; Doležal, Jiří; Lanta, Vojtěch; Lepš, Jan

2010-05-01

Plant species create aggregations of conspecifics as a consequence of limited seed dispersal, clonal growth and heterogeneous environment. Such intraspecific aggregation increases the importance of intraspecific competition relative to interspecific competition which may slow down competitive exclusion and promote species coexistence. To examine how spatial aggregation impacts the functioning of experimental assemblages of varying species richness, eight perennial grassland species of different growth form were grown in random and aggregated patterns in monocultures, two-, four-, and eight-species mixtures. In mixtures with an aggregated pattern, monospecific clumps were interspecifically segregated. Mixed model ANOVA was used to test (i) how the total productivity and productivity of individual species is affected by the number of species in a mixture, and (ii) how these relationships are affected by spatial pattern of sown plants. The main patterns of productivity response to species richness conform to other studies: non-transgressive overyielding is omnipresent (the productivity of mixtures is higher than the average of its constituent species so that the net diversity, selection and complementarity effects are positive), whereas transgressive overyielding is found only in a minority of cases (average of log(overyielding) being close to zero or negative). The theoretical prediction that plants in a random pattern should produce more than in an aggregated pattern (the distances to neighbours are smaller and consequently the competition among neighbours stronger) was confirmed in monocultures of all the eight species. The situation is more complicated in mixtures, probably as a consequence of complicated interplay between interspecific and intraspecific competition. The most productive species ( Achillea, Holcus, Plantago) were competitively superior and increased their relative productivity with mixture richness. The intraspecific competition of these species is

Affective Productions of Mathematical Experience

Science.gov (United States)

Walshaw, Margaret; Brown, Tony

2012-01-01

In underscoring the affective elements of mathematics experience, we work with contemporary readings of the work of Spinoza on the politics of affect, to understand what is included in the cognitive repertoire of the Subject. We draw on those resources to tell a pedagogical tale about the relation between cognition and affect in settings of…

Conceptualizing Student Affect for Science and Technology at the Middle School Level: Development and Implementation of a Measure of Affect in Science and Technology (MAST)

Science.gov (United States)

Romine, William L.; Sadler, Troy D.; Wulff, Eric P.

2017-10-01

We describe the development of the Measure of Affect in Science and Technology (MAST), and study its usefulness for measuring science affect in middle school students via both classical and Rasch measurement perspectives. We then proceed to utilize the measurement structure of the MAST to understand how middle school students at varying levels of affect express their interest and attitudes toward science and technology and gender differences in how students express their affect. We found that affect in science and technology comprises a main dimension, science interest, and four peripheral dimensions: interest in careers in science and technology, attitudes toward science, and interest in attending science class. Of these, careers in science and technology carry the highest affective demand. While males showed higher levels of personal and situational interest in science, a greater interest in careers in science and technology was the biggest contributor to males' higher affect toward science and technology. We argue that whether the MAST is used as a measure of a single construct or multiple subconstructs depends upon specific research or evaluation goals; however, both uses of the MAST yield measures which produce valid inferences for student affect.

Optical bi-sensorial measurement system for production control of extruded profiles

Science.gov (United States)

Weckenmann, A.; Bernstein, J.

2008-09-01

Extruded profiles are semi-finished products (made out of steel, brass, aluminum, synthetics...) which are appointed for wide applications in manufacturing of technical products. As yet used optical sensors in process control working to the shading technology detect the object's shadow orthographically to the axis of illumination. As a consequence they record it unattached by the profiles coat in measurement range at any point of the measured profile with high precision. As a matter of fact, concave zones cannot be captured. Alternatively the measurement of concave zones can be arranged by light-section systems. These do not comply with the required accuracy, are comparatively slow and moreover affected by dislocations of the section of the profile. A measurement system including a light-section and a shading system combines the advantages of both optical systems. It is to serve with a reliable conception for the assembly of a bi-sensorial measurement system consisting of both systems as well as suitable methods of analysis for the in-line inspection of concave profiles. As a result it contains conclusions concerning requirements of the light source, the arrangement of this source and the cameras, obtainable precision and sampling rate as well as the essential synchronization of both systems. After designing an appropriate prototype, the selected light-section system and the shading system will be synchronized and aligned. Therefore, the metered geometrical data will be merged for the evaluation of form deviation. So, developed and adapted software supports and contains proposals to the uncertainty after successful tests. The system and a calibration method will be proved in production where robustness will be a most critical despite of heat, dust and vibrations. The target uncertainty of less than 0.1 mm at every section of the profiles coat has to be met.

Flow, affect and visual creativity.

Science.gov (United States)

Cseh, Genevieve M; Phillips, Louise H; Pearson, David G

2015-01-01

Flow (being in the zone) is purported to have positive consequences in terms of affect and performance; however, there is no empirical evidence about these links in visual creativity. Positive affect often--but inconsistently--facilitates creativity, and both may be linked to experiencing flow. This study aimed to determine relationships between these variables within visual creativity. Participants performed the creative mental synthesis task to simulate the creative process. Affect change (pre- vs. post-task) and flow were measured via questionnaires. The creativity of synthesis drawings was rated objectively and subjectively by judges. Findings empirically demonstrate that flow is related to affect improvement during visual creativity. Affect change was linked to productivity and self-rated creativity, but no other objective or subjective performance measures. Flow was unrelated to all external performance measures but was highly correlated with self-rated creativity; flow may therefore motivate perseverance towards eventual excellence rather than provide direct cognitive enhancement.

Validation of the Consumer Values versus Perceived Product Attributes Model Measuring the Purchase of Athletic Team Merchandise

Science.gov (United States)

Lee, Donghun; Byon, Kevin K.; Schoenstedt, Linda; Johns, Gary; Bussell, Leigh Ann; Choi, Hwansuk

2012-01-01

Various consumer values and perceived product attributes trigger consumptive behaviors of athletic team merchandise (Lee, Trail, Kwon, & Anderson, 2011). Likewise, using a principal component analysis technique on a student sample, a measurement scale was proposed that consisted of nine factors affecting the purchase of athletic team…

40 CFR 63.6004 - How do I demonstrate continuous compliance with the emission limits for tire production affected...

Science.gov (United States)

2010-07-01

... compliance with the emission limits for tire production affected sources? 63.6004 Section 63.6004 Protection... Pollutants: Rubber Tire Manufacturing Continuous Compliance Requirements for Tire Production Affected Sources § 63.6004 How do I demonstrate continuous compliance with the emission limits for tire production...

Measuring on-shelf availability of FMCG products

Directory of Open Access Journals (Sweden)

Grubor Aleksandar

2015-01-01

Full Text Available Technological development and the process of globalization influence the increase of customers' awareness. In these circumstances they are becoming more demanding, expecting retailers to offer them the right product at the right time and at the right place. The result is one of the basic tasks of retailers, which reflects in providing an adequate level of product availability in retail stores. In order to prevent the stock-out situation, special attention should be dedicated to its identification and measurement. These operations are very important for establishing and implementing other various measures for increasing product availability and thus sales and competitiveness of retail companies. In this regard, besides theoretical considerations of product availability, we presented the basic methods for its measurement. Also, by using the sample of six Fast Moving Consumer goods categories, we applied the method based on the analysis of POS data. In addition to identifying the out-of-stock rates, we confirmed the results of other studies that product availability varies among different categories and retail stores.

Measuring green productivity of country: A generlized metafrontier Malmquist productivity index approach

International Nuclear Information System (INIS)

Yu-Ying Lin, Eugene; Chen, Ping-Yu; Chen, Chi-Chung

2013-01-01

This paper measures environmental productivity in 70 countries over the period 1981–2007. Differences in green (environmental) productivity growth across countries under distinct country specific production frontier are measured using directional distance function model, which incorporates desirable output (GDP) and undesirable output (CO 2 emissions). The metafrontier which envelops the two country groups, developed countries and developing countries, are estimated using balanced panel data for the sample countries over the study period. A parametric method is used to compute technical efficiency change, technical change, and scale efficiency change, which aggregate to the generalized metafrontier Malmquist productivity index. The overall results indicated the two country groups operated under distinct stochastic production frontiers and therefore used different production technologies. It is found that developing countries achieved higher growth in their average environmental productivity relative to the metafrontier. Thus the results coincide with the convergence growth theory

Work climate and work load measurement in production room of Batik Merak Manis Laweyan

Science.gov (United States)

Suhardi, Bambang; Simanjutak, Sry Yohana; Laksono, Pringgo Widyo; Herjunowibowo, Dewanto

2017-11-01

The work environment is everything around the labours that can affect them in the exercise of duties and work that is charged. In a work environment, there are workplace climate and workload which affect the labour in force carrying out its work. The working climate is one of the physical factors that could potentially cause health problems towards labour at extreme conditions of hot and cold that exceed the threshold limit value allowed by the standards of health. The climate works closely related to the workload accepted by workers in the performance of their duties. The influence of workload is pretty dominant against the performance of human resources and may cause negative effects to the safety and health of the labours. This study aims to measure the effect of the work climate and the workload against workers productivity. Furthermore, some suggestions to increase the productivity also been recommended. The research conducted in production room of Batik Merak Manis Laweyan. The results showed that the workplace climate and the workload at eight stations in production room of Merak Manis does not agree to the threshold limit value that has been set. Therefore, it is recommended to add more opening windows to add air velocity inside the building thus the humidity and temperature might be reduced.

Measurements of fusion product emission profiles in tokamaks

International Nuclear Information System (INIS)

Strachan, J.D.; Heidbrink, W.W.; Hendel, H.W.; Lovberg, J.; Murphy, T.J.; Nieschmidt, E.B.; Tait, G.D.; Zweben, S.J.

1986-11-01

The techniques and results of fusion product emission profile measurements are reviewed. While neutron source strength profile measurements have been attempted by several methods, neutron scattering is a limitation to the results. Profile measurements using charged fusion products have recently provided an alternative since collimation is much easier for the charged particles

Measurement of Charmonium Production Cross Section at LHCb

CERN Multimedia

Frosini, M

2010-01-01

The great abundance of charmonium states, collected from the start up of LHC, allows to study its production mechanism. In particular the total and differential $J/\\psi$ production cross section are measured in the transverse momentum range [0;10] GeV/$c$ and in the pseudorapidity range $y \\in$ [2.5;4]. The measurements are performed disentagling the prompt (direct production in $pp$ collisions and feed down from excited charmonium states) and delayed ($b$-hadron decays products) component.

Does the Unemployement Benefit Institution Affect the Productivity of Workers? Evidence from a Field Experiment

NARCIS (Netherlands)

Blanco, M.; Dalton, P.S.; Vargas, J.F.

2013-01-01

Abstract: We investigate whether and how the type of unemployment bene t institution affects productivity. We designed a field experiment to compare workers' productivity under a welfare system, where the unemployed receive an unconditional monetary transfer, with their productivity under a workfare

New product, familiar taste: Effects of slogans on cognitive and affective responses to an unknown food product among food neophobics and neophilics

NARCIS (Netherlands)

Fenko, Anna; Leufkens, Jean-Marie; van Hoof, Joris Jasper

2015-01-01

Food neophobia is considered a potential barrier for the introduction of new food products. This study investigated how advertising slogans could influence cognitive and affective responses to a new product in food neophobics and food neophilics. An unknown dairy product was used to examine the

The factorial structure of job-related affective well-being: Polish adaptation of the Warr's measure.

Science.gov (United States)

Mielniczuk, Emilia; Łaguna, Mariola

2018-02-16

The first aim of the study reported in this article was to test the factorial structure of job-related affect in a Polish sample. The second aim was to develop the Polish adaptation of the Warr's job-related affective well-being measure published in 1990, which is designed to assess 4 types of affect at work: anxiety, comfort, depression, enthusiasm. A longitudinal study design with 2 measurement times was used for verifying the psychometric properties of the Polish version of the measure. The final sample consisted of 254 Polish employees from different professions. Participants were asked to fill in a set of questionnaires consisting of measures capturing job-related affective well-being, mood, and turnover intention. The first step of analysis was to test the theoretically-based structure of the job-related affective well-being measure in a Polish sample. The confirmatory factor analysis revealed that a 4-factor model best describes the structure of the measure in comparison to 5 alternative models. Next, reliability of this measure was assessed. All scales achieved good internal consistency and acceptable test-retest reliability after 2 weeks. Finally, the convergent and discriminant validity as well as the criterion and predictive validity of all job-related affective well-being scales was confirmed, based on correlations between job-related affect and mood as well as turnover intention. The results suggest that the Polish adaptation of Warr's job-related affective well-being measure can be used by scientists as well as by practitioners who aim at assessing 4 types of affective well-being at a work context. This work is available in Open Access model and licensed under a CC BY-NC 3.0 PL license.

Crop production in salt affected soils: A biological approach

Energy Technology Data Exchange (ETDEWEB)

Malik, K A [National Inst. for Biotechnology and Genetic Engineering (NIBGE), Faisalabad (Pakistan)

1995-01-01

Plant are susceptible to various stresses, affecting growth productivity. Among the abiotic stresses, soil salinity is most significant and prevalent in both developed and developing countries. As a result, good productive lands are being desertified at a very high pace. To combat this problem various approaches involving soil management and drainage are underway but with little success. It seems that a durable solution of the salinity and water-logging problems may take a long time and we may have to learn to live with salinity and to find other ways to utilize the affected lands fruitfully. A possible approach could be to tailor plants to suit the deleterious environment. The saline-sodic soils have excess of sodium, are impermeable, have little or no organic matter and are biologically almost dead. Introduction of a salt tolerant crop will provide a green cover and will improve the environment for biological activity, increase organic matter and will improve the soil fertility. The plant growth will result in higher carbon dioxide levels, and would thus create acidic conditions in the soil which would dissolve the insoluble calcium carbonate and will help exchange sodium with calcium ions on the soil complex. The biomass produced could be used directly as fodder or by the use of biotechnological and other procedures it could be converted into other value added products. However, in order to tailor plants to suit these deleterious environments, acquisition of better understanding of the biochemical and genetic aspects of salt tolerance at the cellular/molecular level is essential. For this purpose model systems have been carefully selected to carry out fundamental basic research that elucidates and identifies the major factors that confer salt tolerance in a living system. With the development of modern biotechnological methods it is now possible to introduce any foreign genetic material known to confer salt tolerance into crop plants. (Abstract Truncated)

Does increased Nitric Oxide production and oxidative stress due to high fat diet affect cardiac function after myocardial infarction?

Directory of Open Access Journals (Sweden)

Marjan Aghajani

2017-01-01

Full Text Available Background &Objectives: High fat (HF diet by affecting the oxidative stress and nitric oxide (NO production may lead to different effects on function of the heart after myocardial infarction (MI. In the present study we aimed to address the hypothesis that high release of NO by activated macrophages affects LV function after MI.Methods: The animals were randomly divided into four groups comprising each of 10 rats: 1 Sham; 2 MI; 3 Sham+ HF diet; 4 MI+ HF diet. Animals fed with HF diet 30 days before sham and MI surgery. MI was induced by permanent ligation of left anterior descending coronary artery (LAD. Nitric oxide (NO production of peritoneal macrophages, the concentrations of MDA in the heart and the infarct size were measured.Results: Our study indicated that HF has adverse effects on myocardium and it may increase NO production as well as oxidative stress, resulting in augmentation of infarct size.Conclusion: Our results add to our knowledge that HF diet was associated with overproduction of NO by peritoneal macrophages and ROS that lead to development of infarct size and adverse remodeling.

ATLAS measurement of Electroweak Vector Boson production

CERN Document Server

AUTHOR|(INSPIRE)INSPIRE-00453010; The ATLAS collaboration

2017-01-01

The measurements of the Drell-Yan production of W and Z/γ⁎ bosons at the LHC provide a benchmark of our understanding of the perturbative QCD and probe the proton structure in a unique way. The ATLAS collaboration has performed new high precision measurements of the double differential cross-sections as a function of the dilepton mass and rapidity. The measurements are compared to state of calculations at NNLO in QCD and constrain the photon content of the proton. The angular distributions of the Drell-Yan lepton pairs around the Z-boson mass peak probe the underlying QCD dynamics of the Z-boson production mechanisms. The complete set of angular coefficients describing these distributions is presented and compared to theoretical predictions highlighting different approaches of the QCD and EW modelling. First precise inclusive measurements of W and Z production at 13 TeV are presented. $W/Z$ and $W^{+}/W^{−}$ ratios profit from a cancellation of experimental uncertainties.

Guinea pig for meat production: A systematic review of factors affecting the production, carcass and meat quality.

Science.gov (United States)

Sánchez-Macías, Davinia; Barba-Maggi, Lida; Morales-delaNuez, Antonio; Palmay-Paredes, Julio

2018-09-01

In developing countries, interest in guinea pig farming is growing exponentially because it provides a regular source of high quality animal protein for domestic consumption. Guinea pigs (Cavia porcellus) are prolific animals, grow and are capable of reproduction on a flexible diet, and are adaptable to a wide range of climates. This article mainly reviews findings on guinea pig meat production, including factors affecting raising guinea pigs, carcass and meat quality. We also present some studies that describe biological and pathologic effects on carcass component composition. During the last decades no standard procedure has been established for guinea pig carcass evaluation, which makes very difficult any comparison of results with other studies around the world. Herein we highlight a variety of factors that significantly affect carcass and meat quality. Some of these factors are production systems, environmental and genetic factors, management systems, the diet and health status, age, sex and reproductive management. Copyright © 2018 Elsevier Ltd. All rights reserved.

Factors affecting Thai rubber farmer production and marketing in the western province of Kanchanaburi

Directory of Open Access Journals (Sweden)

Narisa Thongtrai

2016-04-01

Full Text Available This research aimed to study the factors affecting the production and marketing of rubber farmers in the western Thai province of Kanchanaburi. The sample group included 30 farmers involved in rubber production. From the questionnaire and statistical analysis by SPSS, 15 observed variables were determined to be factors affecting the production and marketing of rubber farmers. The conclusion from the researchers determined that 1 The area planted is not appropriate and is still expanding plantations without any control was found that the rubber plantations are expanding at high plains area flooding. 2 Farmers of rubber technology farmers are not valid and do not conform to the instructions of the Rubber Research Institute study found that the cause is the opportunity to access technology and lack of knowledge regarding the management, production, and marketing. 3 Use rubber tree tapping of the system to high frequency screaming systems correctly. Does not comply with the instructions of the Rubber Research Institute found that of rubber farmers and farmers opening tapped the tire rubber accelerator before opening a huge size tapped that affect productivity and the income of farmers depressed farmers. 4 Problems with the labor of producing rubber of the household. It was found that labor households in the production system are lower 5 Farmers of Thailand are not yet aware of the concept of livelihood along the sufficiency economy as should farmers be life according to the way of life that is not adjusted to prepare 6 Group integration it was found that is not yet strong.

Measurement of Affecting Factors on Jewelry Choice in Tehran

Directory of Open Access Journals (Sweden)

Samira Nikzad

2017-01-01

Full Text Available One of the production features in post-industrial era is diversified production capacity while maintaining the economic structure of production, which leads to variations in structure of design processes. The needs and preferences of customers shape production processes. As a result, measuring consumer behavior becomes important to design a product. This study aims to identify consumer behavior while choosing ornaments, especially jewelry, in Iran by determining the correlation between economic status and other independent variables, including sex, age, and ethnicity, on purchasing behavior. A field research, including a survey with 200 people, was conducted in Iran to find the consumer behavior. The results of questionnaire analysis remark effect of various variables such as different economic status, ethnicity and education level on expected concepts in jewelry and their symbolic use, where these results of model and image analyses are able to help us in production planning and jewelry design.

Measurement of single top quark production with CMS

CERN Document Server

Andrea, Jeremy

2018-01-01

Several measurements of single top quark production in proton-proton collisions at the LHC at centre-of-mass energies of 7, 8 and 13 TeV, using data collected with the CMS experiment, are presented. The analyses investigate separately the productions of top via t-channel exchange, in association with a W boson (tW) or via the s-channel. Final states with at least one charged lepton and one b-jet are explored to measure inclusive production cross sections. Fiducial and differential cross section measurements in the t-channel are also reported. The measurements can be used to constrain directly the Vtb CKM matrix element by comparing with the most precise standard model theory predictions. Measurements of rare processes involving a top quark and a neutral EWK boson (Z or photon) are also discussed.

Factors affecting surf zone phytoplankton production in Southeastern North Carolina, USA

KAUST Repository

Cahoon, Lawrence B.

2017-07-15

Abstract: The biomass and productivity of primary producers in the surf zone of the ocean beach at Wrightsville Beach, North Carolina, USA, were measured during all seasons, along with environmental parameters and nutrient levels. Variation in biomass (chlorophyll a) was associated with temperature. Primary production (PP), measured by in situ 14-C incubations, was a function of chlorophyll a, tide height at the start of incubations, and rainfall in the preceding 24-hr period. Biomass-normalized production (PB) was also a function of tide height and rainfall in the preceding 24-hr period. We interpreted these results as evidence of surf production 1) as combined contributions of phytoplankton and suspended benthic microalgae, which may confound application of simple P-E models to surf zone production, and 2) being regulated by nutrient source/supply fluctuations independently from other factors. Surf zone biomass and production levels are intermediate between relatively high estuarine values and much lower coastal ocean values. Surf zone production may represent an important trophic connection between these two important ecosystems.

Factors affecting surf zone phytoplankton production in Southeastern North Carolina, USA

KAUST Repository

Cahoon, Lawrence B.; Bugica, Kalman; Wooster, Michael K.; Dickens, Amanda Kahn

2017-01-01

Abstract: The biomass and productivity of primary producers in the surf zone of the ocean beach at Wrightsville Beach, North Carolina, USA, were measured during all seasons, along with environmental parameters and nutrient levels. Variation in biomass (chlorophyll a) was associated with temperature. Primary production (PP), measured by in situ 14-C incubations, was a function of chlorophyll a, tide height at the start of incubations, and rainfall in the preceding 24-hr period. Biomass-normalized production (PB) was also a function of tide height and rainfall in the preceding 24-hr period. We interpreted these results as evidence of surf production 1) as combined contributions of phytoplankton and suspended benthic microalgae, which may confound application of simple P-E models to surf zone production, and 2) being regulated by nutrient source/supply fluctuations independently from other factors. Surf zone biomass and production levels are intermediate between relatively high estuarine values and much lower coastal ocean values. Surf zone production may represent an important trophic connection between these two important ecosystems.

Factors affecting surf zone phytoplankton production in Southeastern North Carolina, USA

Science.gov (United States)

Cahoon, Lawrence B.; Bugica, Kalman; Wooster, Michael K.; Dickens, Amanda Kahn

2017-09-01

The biomass and productivity of primary producers in the surf zone of the ocean beach at Wrightsville Beach, North Carolina, USA, were measured during all seasons, along with environmental parameters and nutrient levels. Variation in biomass (chlorophyll a) was associated with temperature. Primary production (PP), measured by in situ 14-C incubations, was a function of chlorophyll a, tide height at the start of incubations, and rainfall in the preceding 24-hr period. Biomass-normalized production (PB) was also a function of tide height and rainfall in the preceding 24-hr period. We interpreted these results as evidence of surf production 1) as combined contributions of phytoplankton and suspended benthic microalgae, which may confound application of simple P-E models to surf zone production, and 2) being regulated by nutrient source/supply fluctuations independently from other factors. Surf zone biomass and production levels are intermediate between relatively high estuarine values and much lower coastal ocean values. Surf zone production may represent an important trophic connection between these two important ecosystems.

Electrostatics in the environment: How they may affect health and productivity

Science.gov (United States)

Jamieson, K. S.; Simon, H. M. Ap; Bell, J. N. B.

2008-12-01

Lifestyles and the built environment have changed considerably during the past century and have greatly influenced the electric field, small air ion and charged submicron aerosol regimes to which individuals are often exposed. In particular the use of electrical items, synthetic materials/finishes and low humidity levels that can lead to the generation of high electrostatic charges, along with inadequate grounding protocols and building techniques which create 'Faraday cage'-like conditions, have all greatly altered the electromagnetic nature of the microclimates many people occupy for prolonged periods of time. It is suggested that the type, polarity and strengths of electric fields individuals are exposed to may affect their likelihood of succumbing to ill-health through influencing biological functioning, oxygen-uptake and retention rates of inhaled submicron contaminants to a far greater degree than previously realised. These factors can also influence the degree of local surface contamination and adhesion that occurs. It is further suggested that both health and work productivity can be affected by such factors, and that improved 'best practice' electro-hygiene/productivity protocols should be adopted wherever practical.

Electrostatics in the environment: How they may affect health and productivity

International Nuclear Information System (INIS)

Jamieson, K S; ApSimon, H M; Bell, J N B

2008-01-01

Lifestyles and the built environment have changed considerably during the past century and have greatly influenced the electric field, small air ion and charged submicron aerosol regimes to which individuals are often exposed. In particular the use of electrical items, synthetic materials/finishes and low humidity levels that can lead to the generation of high electrostatic charges, along with inadequate grounding protocols and building techniques which create 'Faraday cage'-like conditions, have all greatly altered the electromagnetic nature of the microclimates many people occupy for prolonged periods of time. It is suggested that the type, polarity and strengths of electric fields individuals are exposed to may affect their likelihood of succumbing to ill-health through influencing biological functioning, oxygen-uptake and retention rates of inhaled submicron contaminants to a far greater degree than previously realised. These factors can also influence the degree of local surface contamination and adhesion that occurs. It is further suggested that both health and work productivity can be affected by such factors, and that improved 'best practice' electro-hygiene/productivity protocols should be adopted wherever practical.

Technological measures to improve automotive product quality

OpenAIRE

Gladkov, V.; Kruglov, S.

2010-01-01

The paper examines the basic technological measures aimed at improving product quality in automotive industry. While paying due attention to solving organizational and technological problems, including the development of certification systems for production processes, it is also necessary to improve the technical standards of specific technologies, equipment and materials as they largely determine product quality. Special emphasis is given to the importance of improving the production of auto...

Fermentation conditions that affect clavulanic acid production in Streptomyces clavuligerus: a systematic review

Directory of Open Access Journals (Sweden)

Hooi-Leng eSer

2016-04-01

Full Text Available The β-lactamase inhibitor, clavulanic acid is frequently used in combination with β-lactam antibiotics to treat a wide spectrum of infectious diseases. Clavulanic acid prevents drug resistance by pathogens against these β-lactam antibiotics by preventing the degradation of the β-lactam ring, thus ensuring eradication of these harmful microorganisms from the host. This systematic review provides an overview on the fermentation conditions that affect the production of clavulanic acid in the firstly described producer, Streptomyces clavuligerus. A thorough search was conducted using predefined terms in several electronic databases (PubMed, Medline, ScienceDirect, EBSCO, from database inception to June 30th 2015. Studies must involve wild-type Streptomyces clavuligerus, and full texts needed to be available. A total of 29 eligible articles were identified. Based on the literature, several factors were identified that could affect the production of clavulanic acid in S. clavuligerus. The addition of glycerol or other vegetable oils (e.g. olive oil, corn oil could potentially affect clavulanic acid production. Furthermore, some amino acids such as arginine and ornithine, could serve as potential precursors to increase clavulanic acid yield. The comparison of different fermentation systems revealed that fed-batch fermentation yields higher amounts of clavulanic acid as compared to batch fermentation, probably due to the maintenance of substrates and constant monitoring of certain entities (such as pH, oxygen availability, etc.. Overall, these findings provide vital knowledge and insight that could assist media optimization and fermentation design for clavulanic acid production in S. clavuligerus.

Does Input Quality Drive Measured Differences in Firm Productivity?

DEFF Research Database (Denmark)

Fox, Jeremy T.; Smeets, Valerie Anne Rolande

is roughly of the same order of magnitude as some competitive effects found in the literature, but input quality measures do not explain most productivity dispersion, despite economically large production function coefficients. We find that the wage bill explains as much dispersion as human capital measures.......Firms in the same industry can differ in measured productivity by multiples of 3. Griliches (1957) suggests one explanation: the quality of inputs differs across firms. We add labor market history variables such as experience and firm and industry tenure, as well as general human capital measures...

Managing the Trade-Public Health Linkage in Defence of Trade Liberalisation and National Sovereignty: An Appraisal of United States-Measures Affecting the Production and Sale of Clove Cigarettes

Directory of Open Access Journals (Sweden)

Tapiwa Victor Warikandwa

2014-11-01

Full Text Available Under the legal framework of the World Trade Organisation (WTO, countries have great flexibility to unilaterally adopt environmental regulations that have effect within their territories only. However, the same discretion does not apply to measures that adversely affect imports or exports. An absence of clear guidelines on how to address some of the attendant issues poses challenges to the effectiveness of a trade-environment linkage. Not surprisingly, attempts to link the environment and trade have resulted in a number of jurisprudentially significant cases in which the WTO's Panel and Appellate Body have tried to address critical questions about the Organisation's capacity to address or manage legal or quasi-legal subjects falling outside the scope of its legal framework. In this regard the Panel and Appellate Body reports in the case of United States - Measures Affecting the Production and Sale of Clove Cigarettes (US-Clove Cigarettes have re-ignited the debate on the Organisation's existential challenge of balancing the rights of the sovereign to freely regulate matters pertaining to health or the environment within its domestic domain with the need to maintain the sanctity of the multilateral trade order. This article demonstrates that in the US-Clove Cigarettes case the WTO Panel and Appellate Body, whilst managing to successfully defend the integrity of WTO Member States' treaty commitments and the overarching importance of trade liberalisation within the organisation's policy foundations even in the context of public health-related regulations, failed to provide any substantive affirmation of the development-related challenges facing developing countries that are part of the WTO family.

Do personality traits related to affect regulation predict other tobacco product use among young adult non-daily smokers?

Science.gov (United States)

Brikmanis, Kristin; Petersen, Angela; Doran, Neal

2017-12-01

Understanding factors that influence non-cigarette tobacco use is important given these products' prevalence and health risks. The goal of this study was to test the hypothesis that personality traits related to affect regulation would be associated with greater frequency of other tobacco product (OTP) use in a sample of young adult non-daily smokers. Participants (n=518, 51% male) aged 18-24 were non-daily cigarette smokers recruited from the community for a longitudinal study of tobacco use. Personality characteristics (impulsivity, anhedonia, and negative affectivity) were measured at baseline, and participants reported recent tobacco use at baseline and 3, 6, and 9months later. Assessments were conducted online or via mobile phone. Across the 4 assessments, 33-52% of participants reported recent OTP use, with frequency of use decreasing over time. Longitudinal negative binomial regression models indicated that greater sensation seeking and lack of premeditation were associated with more frequent OTP use (psnon-daily cigarette smokers with greater propensity for immediately rewarding behaviors may use OTPs more frequently. Young, non-daily cigarette smokers with high levels of sensation seeking and/or lack of premeditation may be at increased risk for harms related to OTP use and may benefit from prevention and cessation strategies that specifically address affect. Copyright © 2017 Elsevier Ltd. All rights reserved.

Using Data Envelopment Analysis to Measure International Agricultural Efficiency and Productivity

OpenAIRE

Arnade, Carlos Anthony

1994-01-01

Numerous methods for measuring multifactor productivity have been used by economists. This report uses a recently developed approach, data envlopment analysis, to measure productivity. This method can be used not only to calculate productivity but also to divide productivity measures into indices that measure technical efficiency and technical change. Technical efficiency measures the efficiency with which resources are used. Technical change measures changes in output arising from improved t...

Sliding into happiness: A new tool for measuring affective responses to words

Science.gov (United States)

Warriner, Amy Beth; Shore, David I.; Schmidt, Louis A.; Imbault, Constance L.; Kuperman, Victor

2016-01-01

Reliable measurement of affective responses is critical for research into human emotion. Affective evaluation of words is most commonly gauged on multiple dimensions—including valence (positivity) and arousal—using a rating scale. Despite its popularity, this scale is open to criticism: it generates ordinal data that is often misinterpreted as interval, it does not provide the fine resolution that is essential by recent theoretical accounts of emotion, and its extremes may not be properly calibrated. In five experiments, we introduce a new slider tool for affective evaluation of words on a continuous, well-calibrated and high-resolution scale. In Experiment 1, participants were shown a word and asked to move a manikin representing themselves closer to or farther away from the word. The manikin’s distance from the word strongly correlated with the word’s valence. In Experiment 2, individual differences in shyness and sociability elicited reliable differences in distance from the words. Experiment 3 validated the results of Experiments 1 and 2 using a demographically more diverse population of responders. Finally, Experiment 4 (along with Experiment 2) suggested that task demand is not a potential cause for scale recalibration. In Experiment 5, men and women placed a manikin closer or farther from words that showed sex differences in valence, highlighting the sensitivity of this measure to group differences. These findings shed a new light on interactions among affect, language, and individual differences, and demonstrate the utility of a new tool for measuring word affect. PMID:28252996

Conceptualizing Student Affect for Science and Technology at the Middle School Level: Development and Implementation of a Measure of Affect in Science and Technology (MAST)

Science.gov (United States)

Romine, William L.; Sadler, Troy D.; Wulff, Eric P.

2017-01-01

We describe the development of the Measure of Affect in Science and Technology (MAST), and study its usefulness for measuring science affect in middle school students via both classical and Rasch measurement perspectives. We then proceed to utilize the measurement structure of the MAST to understand how middle school students at varying levels of…

An affective e-commerce design for SMEs product marketing based on kansei engineering

Science.gov (United States)

Habyba, A. N.; Djatna, T.; Anggraeni, E.

2018-04-01

One of the SMEs problems in Indonesia in this information technology era is the inability to control the market. SMEs can use the e-commerce website to improve their competitiveness. It can be used as a marketing tool for SMEs to promote their products and expands the SMEs markets especially for the agroindustry SMEs where located in district area that still rely on local markets to sell their product. Some SMEs e-commerce websites have been developed in Indonesia but can not significantly increased the sales of SMEs product. Furthemore, the design of it is only able to meet the consumer need in function and usability. The development of e-commerce design should pay attention in high affective quality. This is because the affective responses effect the user’s perception of cognitive quality, usability and ease of use of e-commerce. This study is aimed to make e-commerce that can meet the affective needs of users. The result of Kansei words selection and extraction using TF-IDF are four design concepts of e-commerce website. The formulation of new SMEs e-commerce website design is resulted from the integration of four design concepts and four design elements. The “Natural-Formal” concept has the greatest value than other concepts after QTT-1 analysis. This concept can implemented as the new SMEs e-commerce website design.

Device for measuring fission product density

International Nuclear Information System (INIS)

Kaneda, Mitsunori.

1980-01-01

Purpose: To determine the fission product density of xenon or the like and enable measurement of real time of fission product density in a reactor by calculating the disintegration and annihilation of the fission product on the basis of neutron detected output. Constitution: The neutron flux in a reactor is detected by a detector, and applied to first and second density calculators. Second fission product density signal of xenon or the like outputted from first device is again inputted to the device to form an annihilation signal due to disintegration to determine the present density of the second fission product of xenon or the like corresponding to the decrease of the neutron due to the poison of xeron or the like. Similarly, second device determines the first fission product density of iodine or the like. (Sekiya, K.)

40 CFR 63.5996 - How do I demonstrate initial compliance with the emission limits for tire production affected...

Science.gov (United States)

2010-07-01

... with the emission limits for tire production affected sources? 63.5996 Section 63.5996 Protection of... Pollutants: Rubber Tire Manufacturing Testing and Initial Compliance Requirements for Tire Production Affected Sources § 63.5996 How do I demonstrate initial compliance with the emission limits for tire...

Semi-spontaneous oral text production: measurements in clinical practice.

Science.gov (United States)

Lind, Marianne; Kristoffersen, Kristian Emil; Moen, Inger; Simonsen, Hanne Gram

2009-12-01

Functionally relevant assessment of the language production of speakers with aphasia should include assessment of connected speech production. Despite the ecological validity of everyday conversations, more controlled and monological types of texts may be easier to obtain and analyse in clinical practice. This article discusses some simple measurements for the analysis of semi-spontaneous oral text production by speakers with aphasia. Specifically, the measurements are related to the production of verbs and nouns, and the realization of different sentence types. The proposed measurements should be clinically relevant, easily applicable, and linguistically meaningful. The measurements have been applied to oral descriptions of the 'Cookie Theft' picture by eight monolingual Norwegian speakers, four with an anomic type of aphasia and four without any type of language impairment. Despite individual differences in both the clinical and the non-clinical group, most of the measurements seem to distinguish between speakers with and without aphasia.

Measurements of ZZ production with the ATLAS detector and simulation of loop-induced processes with the Herwig event generator

CERN Document Server

AUTHOR|(INSPIRE)INSPIRE-00393156

This thesis presents results and method developments in both experimental and theoretical particle physics. The main part shows measurements of $\\ell^+\\ell^-\\ell'^+\\ell'^-$ production (where $\\ell$, $\\ell'$ is either an electron or a muon) in proton-proton collisions at 13 TeV centre-of-mass energy. The collisions were produced by the Large Hadron Collider in 2015 and 2016 and observed with the ATLAS detector. In a phase space sensitive to Z boson pair production, the integrated cross section as well as differential cross sections with respect to twenty-one observables are measured. Ten of these directly measure associated jet activity. The measurements provide an important test of the Standard Model of particle physics. A direct search for effects beyond the Standard Model affecting ZZ production is performed in a generic effective field theory approach. No significant deviations from the Standard Model predictions are observed. Exclusion limits are set on the parameters describing new physics in the effect...

The effect of feeding on CO2 production and energy expenditure in ponies measured by indirect calorimetry and the 13C-bicarbonate technique.

Science.gov (United States)

Jensen, R B; Kyrstein, T D; Junghans, P; Tauson, A H

2015-11-01

Energy expenditure (EE) can be estimated based on respiratory gas exchange measurements, traditionally done in respiration chambers by indirect calorimetry (IC). However, the (13)C-bicarbonate technique ((13)C-BT) might be an alternative minimal invasive method for estimation of CO(2) production and EE in the field. In this study, four Shetland ponies were used to explore the effect of feeding on CO(2) production and EE measured simultaneously by IC and (13)C-BT. The ponies were individually housed in respiration chambers and received either a single oral or intravenous (IV) bolus dose of (13)C-labelled sodium bicarbonate (NaH(13)CO(3)). The ponies were fed haylage 3 h before (T(-3)), simultaneously with (T(0)) or 3 h after (T(+3)) administration of (13)C-bicarbonate. The CO(2) produced and O(2) consumed by the ponies were measured for 6 h with both administration routes of (13)C-bicarbonate at the three different feeding times. Feeding time affected the CO(2) production (P<0.001) and O(2) consumption (P<0.001), but not the respiratory quotient (RQ) measured by IC. The recovery factor (RF) of (13)C in breath CO(2) was affected by feeding time (P<0.01) and three different RF were used in the calculation of CO(2) production measured by 13C-BT. An average RQ was used for the calculations of EE. There was no difference between IC and (13)C-BT for estimation of CO(2) production. An effect of feeding time (P<0.001) on the estimated EE was found, with higher EE when feed was offered (T(0) and T(+3)) compared with when no feed was available (T -3) during measurements. In conclusion, this study showed that feeding time affects the RF and measurements of CO(2) production and EE. This should be considered when the (13)C-BT is used in the field. IV administration of (13)C-bicarbonate is recommended in future studies with horses to avoid complex (13)C enrichment-time curves with maxima and shoulders as observed in several experiments with oral administration of (13)C-bicarbonate.

Electrostatics in the environment: How they may affect health and productivity

Energy Technology Data Exchange (ETDEWEB)

Jamieson, K S; ApSimon, H M; Bell, J N B [Centre for Environmental Policy, Faculty of Natural Sciences, Imperial College London, London SW7 2AZ (United Kingdom)], E-mail: keith.jamieson02@imperial.ac.uk

2008-12-01

Lifestyles and the built environment have changed considerably during the past century and have greatly influenced the electric field, small air ion and charged submicron aerosol regimes to which individuals are often exposed. In particular the use of electrical items, synthetic materials/finishes and low humidity levels that can lead to the generation of high electrostatic charges, along with inadequate grounding protocols and building techniques which create 'Faraday cage'-like conditions, have all greatly altered the electromagnetic nature of the microclimates many people occupy for prolonged periods of time. It is suggested that the type, polarity and strengths of electric fields individuals are exposed to may affect their likelihood of succumbing to ill-health through influencing biological functioning, oxygen-uptake and retention rates of inhaled submicron contaminants to a far greater degree than previously realised. These factors can also influence the degree of local surface contamination and adhesion that occurs. It is further suggested that both health and work productivity can be affected by such factors, and that improved 'best practice' electro-hygiene/productivity protocols should be adopted wherever practical.

Productivity measurement and growth in Nigeria: challenges and prospects

Directory of Open Access Journals (Sweden)

Chibueze C. IKEJI

2010-12-01

Full Text Available Productivity (growth measurements (describing the assessment of an economy’s rate of change in the ratio of a volume measure of output to a volume measure of input use and related analysis are regular undertakings by staff of economic development of most nations and development institutions such as the OECD. Although they strive to accomplish objectives related to studying efficiency or the achievement of maximum output physically achievable under the use of current technology and given inputs, accounting for the contribution of real costs savings; introduction of benchmarks for production processes and to highlight living standards obtaining at points in time, its emphasis has been at the expense of examination of issues related to society (institutions, history, innovation and productivity change, which are concerned with promoting growth beyond mere productivity accounting. This paper has attempted to address all these issues as they pertain to Nigeria’s rather stagnant or declining economy. This slight modification was prompted by changes from philosophers concerned with the wider area of productivity measurement and change. The literature agrees that productivity measurement (growth accounting only “identified the significance of different proximate sources of growth” but fails to employ institutional, historical case studies to investigate the underlying causes of the growth, innovation and productivity change. Details of deficiencies related to the foregoing issues are examined and policy recommendations drafted and presented to assist practitioners, policy and decision makers and other stakeholders.

Experimental measurements of negative hydrogen ion production from surfaces

International Nuclear Information System (INIS)

Graham, W.G.

1977-09-01

Experimental measurements of the production of H - from surfaces bombarded with hydrogen are reviewed. Some measurements of H + and H 0 production from surfaces are also discussed with particular emphasis on work which might be relevant to ion source applications

Production performance and plasma metabolites of dairy ewes in early lactation as affected by chitosan

Energy Technology Data Exchange (ETDEWEB)

Garcia-Rodriguez, A.; Arranz, J.; Mandaluniz, N.; Beltrán-de-Heredia, I.; Ruiz, R.; Goiri, I.

2015-07-01

The objective of this study was to evaluate the effects of chitosan (CHI) supplementation on production performance and blood parameters in dairy ewes. Twenty-four multiparous Latxa dairy ewes at d 16 of lactation were divided into two groups of 12 ewes each. Ewes were fed one of two experimental concentrates (0.840 kg dry matter/d), control or supplemented with 1.2% CHI, on a dry matter basis. Ewes also had free access to tall fescue hay, water, and mineral salts. The experimental period lasted for 25 d, of which the first 14 d were for treatment adaptation and the last 11 d for measurements and samplings. Supplementation with CHI decreased total (p=0.043) and fescue (p=0.035) dry matter intake (DMI), but did not affect concentrate DMI. Supplementation with CHI, moreover, increased plasma glucose (p=0.013) and BUN concentrations (p=0.035), but did not affect those of non-esterified fatty acids. Dietary supplementation with CHI, however, did not affect milk yield, 6.5% FCM, milk composition, or BW, but it improved dietary apparent efficiency by increasing the milk yield-to-DMI (p=0.055) and 6.5% FCM-to-DMI (p=0.045) ratios. In conclusion, dietary supplementation of chitosan maintained ewe performance while reducing feed intake and improving dietary apparent efficiency. (Author)

An Affective Prototyping Approach for the User-Satisfying Assistive Products

DEFF Research Database (Denmark)

Lai, Yoke Chin

This paper outlines the key concepts of a study whose main aim is to devise an integrated design method for efficiently designing usable assistive products. The study grounds on Affective Design principle formulated for user’s needs, emotions and experience handling in an attempt to outline...... an integrated approach so that the key concept of participatory design could be practiced. Incorporating the maturing Augmented Reality technology is expected to create a design setting that could motivate active end-user involvement from the start throughout the product design process. With the aids...... of ontological modeling approach, the design setting is envisioned suitable for disabled and elderly end users participation and to support capturing the abstract but valuable user’s real needs that are influenced by emotions and experiences. The ontology model will outline the basis of a design knowledge...

Measurement of Single-top Quark Production with ATLAS Data

CERN Document Server

Holzbauer, J L

2011-01-01

Single-top production processes have been studied using 0.7 fb-1 of data from 7 TeV center-of-mass energy proton-proton collisions collected with the ATLAS detector at the LHC. Single-top is electroweak top production and the standard model includes three production modes. Each contains a Wtb vertex, allowing the possibility of a direct measurement of the CKM matrix element |Vtb|. Single-top could also be sensitive to new physics, such as flavor changing neutral currents or heavy W' bosons. Using cut-based selections, a limit of < 39.1 pb is set for dilepton Wt production and < 26.5 pb for s-channel production. For the t-channel measurement, both cut-based and neural network analyses are performed and the cross-section is measured to be 90 +32 -22 pb, where 65 +28 -19 pb is expected according to standard model.

Issues in Measurement and International Comparison of Productivity - An Overview

NARCIS (Netherlands)

Van Ark, Bart

1996-01-01

This paper reviews recent development in theory and measurement of productivity performance in an international comparative perspective. It emphasises the need for a better link between the theory and practice of measurement, in particular concerning measurement of productivity levels. The paper

Dosimetric measurement of the disintegration rate of fission products

International Nuclear Information System (INIS)

Solymosi, J.; Nagy, L.G.; Zagyvai, P.

1992-01-01

Investigations on the disintegration rate of fission products of 238 U and 239 Pu are presented. The intensity of the β-and γ-radiation of fission products were measured continously in an interval of 1-1300 hours following the fission, offering the possibility for determining the general and specific characteristics of the individual fission products. A universal measuring procedure was elaborated for the rapid in situ determination of the dosimetric features of fission products, which is suitable for the accurate evaluation and prediction of external absorbed dose even in case of fission products of various origin and unknown composition. (author) 6 refs.; 7 figs.; 1 tab

Measuring Productivity Change without Neoclassical Assumptions: A Conceptual Analysis

NARCIS (Netherlands)

B.M. Balk (Bert)

2008-01-01

textabstractThe measurement of productivity change (or difference) is usually based on models that make use of strong assumptions such as competitive behaviour and constant returns to scale. This survey discusses the basics of productivity measurement and shows that one can dispense with most if not

Do water cuts affect productivity? Case study of African ...

African Journals Online (AJOL)

This study sought to examine the impact of water disruptions on productivity in African manufacturing firms, using cross-sectional data from the World Bank enterprise surveys. We measured water infrastructure quality or water disruptions using the number of hours per day without water and found this indicator to be a ...

How Glassy States Affect Brown Carbon Production?

Science.gov (United States)

Liu, P.; Li, Y.; Wang, Y.; Bateman, A. P.; Zhang, Y.; Gong, Z.; Gilles, M. K.; Martin, S. T.

2015-12-01

Secondary organic material (SOM) can become light-absorbing (i.e. brown carbon) via multiphase reactions with nitrogen-containing species such as ammonia and amines. The physical states of SOM, however, potentially slow the diffusion of reactant molecules in organic matrix under conditions that semisolids or solids prevail, thus inhibiting the browning reaction pathways. In this study, the physical states and the in-particle diffusivity were investigated by measuring the evaporation kinetics of both water and organics from aromatic-derived SOMs using a quartz-crystal-microbalance (QCM). The results indicate that the SOMs derived from aromatic precursors toluene and m-xylene became solid (glassy) and the in particle diffusion was significantly impeded for sufficiently low relative humidity ( toluene-derived SOM after ammonia exposure at varied RHs. The results suggest that the production of light-absorbing nitrogen-containing compounds from multiphase reactions with ammonia was kinetically limited in the glassy organic matrix, which otherwise produce brown carbon. The results of this study have significant implications for production and optical properties of brown carbon in urban atmospheres that ultimately influence the climate and tropospheric photochemistry.

Transaction costs and social networks in productivity measurement

DEFF Research Database (Denmark)

Henningsen, Geraldine; Henningsen, Arne; Henning, Christian H. C. A.

2015-01-01

. Hence, both the absolute productivity measures and, more importantly, the productivity ranking will be distorted. A major driver of transaction costs is poor access to information and contract enforcement assistance. Social networks often catalyse information exchange as well as generate trust...... and support. Hence, we use measures of a firm’s access to social networks as a proxy for the transaction costs the firm faces. We develop a microeconomic production model that takes into account transaction costs and networks. Using a data set of 384 Polish farms, we empirically estimate this model...... and compare different parametric, semiparametric, and nonparametric model specifications. Our results generally support our hypothesis. Especially, large trading networks and dense household networks have a positive influence on a farm’s productivity. Furthermore, our results indicate that transaction costs...

A STUDY ON FACTORS AFFECTING BUYING BEHAVIOUR OF CONSUMERS FOR ECO - FRIENDLY PRODUCTS

OpenAIRE

N. Anil Kumar; Dr. Mridanish Jha

2017-01-01

Products are not the only thing which can be eco-friendly and actions are also friendly to the environment. Several people think that eco-friendly products are only the first step, and that people who are actually dedicated to the environment also need to change their lifestyles, diminishing the quantum of resources they use by living more competently. The exploratory factor analysis shows that price, quality, value, trust and easy to use are the factors that affecting buying behaviour of con...

Integral measurements of neutron production in spallation targets

International Nuclear Information System (INIS)

Frehaut, J.; Deneuville, D.; Ledoux, X.; Lochard, J.P.; Longuet, J.L.; Petibon, E.; Alrick, K.; Bownan, D.; Cverna, F.; King, N.S.P.; Morgan, G.L.; Greene, G.; Hanson, A.; Snead, L.; Thompson, R.; Ward, T.

1998-01-01

Measurements of neutron production for thick iron, tungsten and lead targets of different diameter prototypic for spallation systems have been made at SATURNE in an incident proton energy range from 400 MeV to 2 GeV. TIERCE code system calculations are in good agreement with experiment for iron and large diameter tungsten and lead targets. They overestimate the measured neutron production for tungsten and lead targets for diameter ≤20 cm. (author)

Glycerol Monolaurate Inhibits Lipase Production by Clinical Ocular Isolates Without Affecting Bacterial Cell Viability.

Science.gov (United States)

Flanagan, Judith Louise; Khandekar, Neeta; Zhu, Hua; Watanabe, Keizo; Markoulli, Maria; Flanagan, John Terence; Papas, Eric

2016-02-01

We sought to determine the relative lipase production of a range of ocular bacterial isolates and to assess the efficacy of glycerol monolaurate (GML) in inhibiting this lipase production in high lipase-producing bacteria without affecting bacterial cell growth. Staphylococcus aureus,Staphylococcus epidermidis,Propionibacterium acnes, and Corynebacterium spp. were inoculated at a density of 10(6)/mL in varying concentrations of GML up to 25 μg/mL for 24 hours at 37 °C with constant shaking. Bacterial suspensions were centrifuged, bacterial cell density was determined, and production of bacterial lipase was quantified using a commercial lipase assay kit. Staphylococcus spp. produced high levels of lipase activity compared with P. acnes and Corynebacterium spp. GML inhibited lipase production by Staphylococcal spp. in a dose-dependent manner, with S. epidermidis lipase production consistently more sensitive to GML than S. aureus. Glycerol monolaurate showed significant (P < 0.05) lipase inhibition above concentrations of 15 μg/mL in S. aureus and was not cytotoxic up to 25 μg/mL. For S. epidermidis, GML showed significant (P < 0.05) lipase inhibition above 7.5 μg/mL. Lipase activity varied between species and between strains. Staphylococcal spp. produced higher lipase activity compared with P. acnes and Corynebacterium spp. Glycerol monolaurate inhibited lipase production by S. aureus and S. epidermidis at concentrations that did not adversely affect bacterial cell growth. GML can be used to inhibit ocular bacterial lipase production without proving detrimental to commensal bacteria viability.

40 CFR Table 1 to Subpart Xxxx of... - Emission Limits for Tire Production Affected Sources

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 12 2010-07-01 2010-07-01 true Emission Limits for Tire Production Affected Sources 1 Table 1 to Subpart XXXX of Part 63 Protection of Environment ENVIRONMENTAL PROTECTION.... 63, Subpt. XXXX, Table 1 Table 1 to Subpart XXXX of Part 63—Emission Limits for Tire Production...

Factors Affecting Consumer Purchase Decision on Insurance Product in PT. Prudential Life Assurance Manado

OpenAIRE

Esau, Eko Yiswa Rasti

2015-01-01

Marketing Mix is the main factor that could affect the whole marketing system. The absence of marketing mix analysis will affecting negatively on a marketing performance. The research aims to analyze the influence of Product, Price, Promotion, People and Process of the Prudential Life Assurance Manado Area on the Consumer Purchase Decision. Data collected through distribution of questionnaires to 100 consumer of Prudential Life Assurance Manado Area. The research used Classic Assumption test ...

Do non-native plant species affect the shape of productivity-diversity relationships?

Science.gov (United States)

Drake, J.M.; Cleland, E.E.; Horner-Devine, M. C.; Fleishman, E.; Bowles, C.; Smith, M.D.; Carney, K.; Emery, S.; Gramling, J.; Vandermast, D.B.; Grace, J.B.

2008-01-01

The relationship between ecosystem processes and species richness is an active area of research and speculation. Both theoretical and experimental studies have been conducted in numerous ecosystems. One finding of these studies is that the shape of the relationship between productivity and species richness varies considerably among ecosystems and at different spatial scales, though little is known about the relative importance of physical and biological mechanisms causing this variation. Moreover, despite widespread concern about changes in species' global distributions, it remains unclear if and how such large-scale changes may affect this relationship. We present a new conceptual model of how invasive species might modulate relationships between primary production and species richness. We tested this model using long-term data on relationships between aboveground net primary production and species richness in six North American terrestrial ecosystems. We show that primary production and abundance of non-native species are both significant predictors of species richness, though we fail to detect effects of invasion extent on the shapes of the relationship between species richness and primary production.

On τ-Compactness of Products of τ-Measurable Operators

Science.gov (United States)

Bikchentaev, Airat M.

2017-12-01

Let M be a von Neumann algebra of operators on a Hilbert space H, τ be a faithful normal semifinite trace on M. We obtain some new inequalities for rearrangements of τ-measurable operators products. We also establish some sufficient τ-compactness conditions for products of selfadjoint τ-measurable operators. Next we obtain a τ-compactness criterion for product of a nonnegative τ-measurable operator with an arbitrary τ-measurable operator. We construct an example that shows importance of nonnegativity for one of the factors. The similar results are obtained also for elementary operators from M. We apply our results to symmetric spaces on (M, τ ). The results are new even for the *-algebra B(H) of all linear bounded operators on H endowed with the canonical trace τ = tr.

Measurement of beauty production from dimuon events at HERA

International Nuclear Information System (INIS)

2009-01-01

Beauty production in events containing two muons in the final state has been measured with the ZEUS detector at HERA using an integrated luminosity of 114 pb -1 . A low transverse-momentum threshold for muon identification, in combination with the large rapidity coverage of the ZEUS muon system, gives access to almost the full phase space for beauty production. The total cross section for beauty production in ep collisions at (s) 1/2 = 318 GeV has been measured to be σ tot (ep → b b-bar X) = 13.9 ± 1.5(stat.) +4.0 -4.3 (syst.) nb. Differential cross sections and a measurement of b b-bar correlations are also obtained, and compared to other beauty cross-section measurements, Monte Carlo models and next-to-leading-order QCD predictions.

Functional Measurement Analysis of Brand Equity: Does Brand Name Affect Perceptions of Quality?

Science.gov (United States)

Hilgenkamp, Heather; Shanteau, James

2010-01-01

This research project used Functional Measurement to examine how the brand name of consumer products impacts intended purchasing decisions. Thirty undergraduate students tested actual products from three different product categories (crayons, tissues, and tortilla chips). Each product category consisted of three different brands; one with high…

Ammonia production in poultry houses can affect health of humans, birds, and the environment-techniques for its reduction during poultry production.

Science.gov (United States)

Naseem, Sadia; King, Annie J

2018-06-01

Due to greater consumption of poultry products and an increase in exports, more poultry houses will be needed. Therefore, it is important to investigate ways that poultry facilities can coexist in close proximity to residential areas without odors and environmental challenges. Ammonia (NH 3 ) is the greatest concern for environmental pollution from poultry production. When birds consume protein, they produce uric acid, ultimately converted to NH 3 under favorable conditions. Factors that increase production include pH, temperature, moisture content, litter type, bird age, manure age, relative humidity, and ventilation rate (VR). NH 3 concentration and emissions in poultry houses depend on VR; seasons also have effects on NH 3 production. Modern ventilation systems can minimize NH 3 in enclosed production spaces quickly but increase its emissions to the environment. NH 3 adversely affects the ecosystem, environment, and health of birds and people. Less than 10 ppm is the ideal limit for exposure, but up to 25 ppm is also not harmful. NH 3 can be minimized by housing type, aerobic and anaerobic conditions, manure handling practices, litter amendment, and diet manipulation without affecting performance and production. Antibiotics can minimize NH 3 , but consumers have concerns about health effects. Administration of probiotics seems to be a useful replacement for antibiotics. More studies have been conducted on broilers, necessitating the need to evaluate the effect of probiotics on NH 3 production in conjunction with laying hen performance and egg quality. This comprehensive review focuses on research from 1950 to 2018.

Product variety, product complexity and manufacturing operational performance: A systematic literature review

DEFF Research Database (Denmark)

Trattner, Alexandria Lee; Hvam, Lars; Herbert-Hansen, Zaza Nadja Lee

Manufacturing in the twenty-first century has been wrought with the struggle to satisfy the rising demand for greater product variety and more complex products while still maintaining efficient manufacturing operations. However, the literature lacks an overview of which operational performance...... measures are most affected by increased variety and complexity. This study presents a systematic literature review of the recent scholarly literature on variety, complexity and manufacturing operational performance (MOP). Results show that product variety has a consistently negative relationship with MOP...... across different time, cost, quality and flexibility measures while product complexity lacks evidence of strong relationships with MOP measures....

40 CFR 63.5795 - How do I know if my reinforced plastic composites production facility is a new affected source or...

Science.gov (United States)

2010-07-01

... for Hazardous Air Pollutants: Reinforced Plastic Composites Production What This Subpart Covers § 63.5795 How do I know if my reinforced plastic composites production facility is a new affected source or an existing affected source? (a) A reinforced plastic composites production facility is a new...

Biotin status affects nickel allergy via regulation of interleukin-1beta production in mice.

Science.gov (United States)

Kuroishi, Toshinobu; Kinbara, Masayuki; Sato, Naoki; Tanaka, Yukinori; Nagai, Yasuhiro; Iwakura, Yoichiro; Endo, Yasuo; Sugawara, Shunji

2009-05-01

Biotin, a water-soluble B complex vitamin, is possibly involved in chronic inflammatory diseases, although the detailed mechanisms are unclear. In this study, we investigated the effects of biotin status on nickel (Ni) allergy in mice. Mice were fed a basal or biotin-deficient (BD) diet for 8 wk and sensitized with an intraperitoneal injection of NiCl(2) and lipopolysaccharide. Ten days after sensitization, NiCl(2) was intradermally injected into pinnas and ear swelling was measured. For in vitro analysis, we cultured a murine macrophage cell line, J774.1, under a biotin-sufficient (C, meaning control) or BD condition for 4 wk and analyzed interleukin (IL)-1 production. Significantly higher ear swelling was induced in BD mice than C mice. Adaptive transfer of splenocytes from both C and BD mice induced Ni allergy in unsensitized mice. Regardless of donor mice, ear swelling was significantly higher in BD recipient mice than C recipient mice. Ni allergy was not induced in either C or BD IL-1(-/-) mice. Splenocytes from BD mice produced a significantly higher amount of IL-1beta than those from C mice. Production and mRNA expression of IL-1beta were significantly higher in BD J774.1 cells than in C cells. Biotin supplementation inhibited the augmentation of IL-1beta production in vitro. In vivo supplementation of biotin in drinking water dose-dependently decreased ear swelling in C and BD mice. These results indicate that biotin status affects Ni allergy in the elicitation phase via the upregulation of IL-1beta production in mice, suggesting that biotin supplementation may have therapeutic effects on human metal allergy.

Innovation Barriers and Enablers that Affect Productivity in Uganda Building Industry

Directory of Open Access Journals (Sweden)

Henry Mwanaki Alinaitwe, , and

2007-06-01

Full Text Available The construction industry has of recent been blamed for lack of innovation. Lack of innovation in the industry is believed to be responsible for the decreasing or stagnant levels of productivity in comparison with other industries. This paper reviews the major barriers and enablers to innovation in general. Propositions were made about the factors that affect innovation in the construction industry which were then formulated into a questionnaire. A survey was made on building contractors in Uganda, a developing country, targeting those with financial strength, large in size, and with high capacity to carry out big projects. The identified factors were then ranked and correlated. The level of training in science, engineering and technical education, and the level of research and development at the industry level are looked at as the greatest innovation enablers in building that will drive forward labour productivity. The size of the domestic market and the level of security are the worst innovation barriers that lead to low productivity in the building industry in Uganda. Contractors, policy makers and the government should address the identified factors in order to improve productivity.

Factors Affecting Re-usage Intentions of Virtual Communities Supporting Cosmetic Products

Directory of Open Access Journals (Sweden)

Jhong-Min Yang

2017-01-01

Full Text Available Aim/Purpose: This study uses a cosmetic virtual community (VC as the research context and the UTAUT model as the theoretical structure aim to explore factors affecting the re-usage intentions of VC members. Background: The Internet use rate of VC was up to 50%, thereby implying that VC gained the attention of Internet users. Therefore, operating a VC will be an effective way to communicate with customers. However, to maintain an existing member is more efficient than creating a new one. As such, understanding determinants of VC members’ re-use intentions becomes important for firms. Methodology: Through an online survey, 276 valid responses were gathered. The collected data were examined by performing confirmatory factor analysis, structural equation modelling procedures, as well as the moderator analysis. Contribution: This study shows the importance in the context of online cosmetics-related VC, which was rarely explored before. We provide issues for future research, despite the accumulated academic literature related to UTAUT and VC. Findings: Results show that only performance expectancy and social influence significantly affecting re-usage intentions and only gender has moderating effects on the path from performance expectancy to VC re-use intention and from trust to VC re-use intention. Recommendations for Practitioners\t: This study found that users emphasized performance expectancy most of all. A cosmetic product-related VC should introduce products abundantly, offer useful information, and help people accomplish tasks quickly and productively. Recommendation for Researchers: Future researchers may use our findings to conduct further positivist research in the area of social influence using different subjects and research contexts.

Measures for Increasing of Company’s Production Capacity

Directory of Open Access Journals (Sweden)

Ernesta Žikevičiūtė

2012-07-01

Full Text Available Production capacity improvements are poorly explored areas of economic literature and the existing methods are difficult to apply. For this reason, the organization has only a superficial analysis of capacity, but after all this time, each production company had to improve the production capacity for the market economy and the most economical use of production factors.This article explores the company’s production capacity for better use of tools. It also presents the capacity of their concept, establishment, evaluates the factors leading to their production capacity, for developing efficiency measures and model presentation.Article in Lithuanian

Control of polysilicon on-film particulates with on-product measurements

Science.gov (United States)

Barker, Judith B.; Chain, Elizabeth E.; Plachecki, Vincent E.

1997-08-01

Historically, a number of in-line particle measurements have been performed on separate test wafers included with product wafers during polysilicon processes. By performing film thickness and particulate measurements directly on product wafers, instead, a number of benefits accrue: (1) reduced test wafer usage, (2) reduced test wafer storage requirements, (3) reduced need for equipment to reclaim test wafers, (4) reduced need for direct labor to reclaim test wafers, and (5) reduced engineering 'false alarms' due to incorrectly processed test wafers. Implementation of on-product measurements for the polysilicon diffusion process required a number of changes in both philosophy and methodology. We show the necessary steps to implementation of on-product particle measurements with concern for overall manufacturing efficiency and the need to maintain appropriate control. Particle results from the Tencor 7600 Surfscan are presented.

Factors affecting the efficiency of foal production by intracytoplasmic sperm injection (ICSI

Directory of Open Access Journals (Sweden)

Grady ST

2016-08-01

Full Text Available Equine embryo production by intracytoplasmic sperm injection (ICSI is currently effective enough to be used clinically. However, there are several factors that affect the efficiency of this procedure because, in addition to specialized equipment, skill in oocyte and embryo handling, and sperm preparation as well as knowledge of oocyte and embryo culture are required. To the best of our knowledge, there are currently only a couple of reports available on the expected efficiency of foal production by ICSI. Here we discuss the parameters that pertain to the Texas A&M Equine Embryo Laboratory only, as other laboratories may have different results.

Measurement of beauty production from dimuon events at HERA

Energy Technology Data Exchange (ETDEWEB)

Chekanov, S.; Derrick, M.; Magill, S. [Argonne National Laboratory, Argonne, IL (United States)] (and others)

2008-09-15

Beauty production in events containing two muons in the final state has been measured with the ZEUS detector at HERA using an integrated luminosity of 114 pb{sup -1}. A low transverse-momentum threshold for muon identification, in combination with the large rapidity coverage of the ZEUS muon system, gives access to almost the full phase space for beauty production. The total cross section for beauty production in ep collisions at {radical}(s) = 318 GeV has been measured to be {sigma}{sub tot}(ep {yields} b anti bX) = 13.9 {+-} 1.5(stat.){sub -4.3}{sup +4.0}(syst.) nb. Differential cross sections and a measurement of b anti b correlations are also obtained, and compared to other beauty cross-section measurements, Monte Carlo models and next-to-leading-order QCD predictions. (orig.)

How does accounting for worker productivity affect the measured cost-effectiveness of lumbar discectomy?

Science.gov (United States)

Koenig, Lane; Dall, Timothy M; Gu, Qian; Saavoss, Josh; Schafer, Michael F

2014-04-01

Back pain attributable to lumbar disc herniation is a substantial cause of reduced workplace productivity. Disc herniation surgery is effective in reducing pain and improving function. However, few studies have examined the effects of surgery on worker productivity. We wished to determine the effect of disc herniation surgery on workers' earnings and missed workdays and how accounting for this effect influences the cost-effectiveness of surgery? Regression models were estimated using data from the National Health Interview Survey to assess the effects of lower back pain caused by disc herniation on earnings and missed workdays. The results were incorporated into Markov models to compare societal costs associated with surgical and nonsurgical treatments for privately insured, working patients. Clinical outcomes and utilities were based on results from the Spine Patient Outcomes Research Trial and additional clinical literature. We estimate average annual earnings of $47,619 with surgery and $45,694 with nonsurgical treatment. The increased earnings for patients receiving surgery as compared with nonsurgical treatment is equal to $1925 (95% CI, $1121-$2728). After surgery, we also estimate that workers receiving surgery miss, on average, 3 fewer days per year than if workers had received nonsurgical treatment (95% CI, 2.4-3.7 days). However, these fewer missed work days only partially offset the assumed 20 workdays missed to recover from surgery. More fully accounting for the effects of disc herniation surgery on productivity reduced the cost of surgery per quality-adjusted life year (QALY) from $52,416 to $35,146 using a 4-year time horizon and from $27,359 to $4186 using an 8-year time horizon. According to a sensitivity analysis, the 4-year cost per QALY varies between $27,921 and $49,787 depending on model assumptions. Increased worker earnings resulting from disc herniation surgery may offset the increased direct medical costs associated with surgery. After

Innovation Barriers and Enablers that Affect Productivity in Uganda Building Industry

OpenAIRE

Henry Mwanaki Alinaitwe, , and; Kristian Widén; Jackson Mwakali; Bengt Hansson

2007-01-01

The construction industry has of recent been blamed for lack of innovation. Lack of innovation in the industry is believed to be responsible for the decreasing or stagnant levels of productivity in comparison with other industries. This paper reviews the major barriers and enablers to innovation in general. Propositions were made about the factors that affect innovation in the construction industry which were then formulated into a questionnaire. A survey was made on building contractors in U...

Factors affecting the water holding capacity of red meat products: a review of recent research advances.

Science.gov (United States)

Cheng, Qiaofen; Sun, Da-Wen

2008-02-01

The water holding capacity of meat products is a very important quality attribute which has an influence on product yield, which in turn has economic implications, but is also important in terms of eating quality. A number of pre-and post-mortem factors influence the water holding capacity (WHC) of meat. During the growth and development of meat animals, genotype and animal diet are important due to their direct influence on muscle characteristics. In the immediate pre-slaughter period, stresses on the animal such as fasting, and different stunning methods are likely to influence meat WHC. In the post-slaughter period chilling, ageing, injecting non-meat ingredients, as well as tumbling have important influences on WHC. Furthermore, cooking and cooling procedures for the final meat products can also affect the WHC of the product, in particular the cooking and the cooling methods, the heating and the cooling rate, the cooking temperature, and the endpoint temperature. This paper provides an overview of recent research on important intrinsic and extrinsic factors that affect the WHC of beef, pork, and lamb products, and reveals explanations and solutions to some of the critical problems related to WHC and product quality.

How Does the Presence of High Need for Recovery Affect the Association Between Perceived High Chronic Exposure to Stressful Work Demands and Work Productivity Loss?

Science.gov (United States)

Dewa, Carolyn S; Nieuwenhuijsen, Karen; Sluiter, Judith K

2016-06-01

Employers have increasingly been interested in decreasing work stress. However, little attention has been given to recovery from the exertion experienced during work. This paper addresses the question: how does the presence of high need for recovery (HNFR) affect the association between perceived high chronic exposure to stressful work demands (PHCE) and work productivity loss (WPL)?. Data were from a population-based survey of 2219 Ontario workers. The Work Limitations Questionnaire was used to measure WPL. The relationship between HNFR and WPL was examined using four multiple regression models. Our results indicate that HNFR affects the association between PHCE and WPL. They also suggest that PHCE alone significantly increases the risk of WPL. Our results suggest that HNFR as well as PHCE could be an important factor for workplaces to target to increase worker productivity.

Functional Measurement Analysis of Brand Equity: Does Brand Name affect Perceptions of Quality?

Directory of Open Access Journals (Sweden)

James Shanteau

2010-01-01

Full Text Available This research project used Functional Measurement to examine how the brand name of consumer products impacts intended purchasing decisions. Thirty undergraduate students tested actual products from three different product categories (crayons, tissues, and tortilla chips. Each product category consisted of three different brands; one with high brand value, one with medium, and one with low brand (generic value. For each brand, there were five conditions: 1 the product with the correct brand name; 2 the product with a switched brand name; 3 the product with another switched brand name; 4 the product alone with no brand name; and 5 the brand name alone with no product. Participants were unaware that products had been switched. After trying each product, participants rated their likelihood to purchase on a 9-point Likert scale: 1 being "definitely would not buy" and 9 being "definitely would buy." Results revealed that perceptions of quality were dependent on both perceived product quality and brand name. Unexpectedly, results also showed that the strength of the brand equity effect is dependent on product type, e.g., chips showed the strongest brand effect. For most product categories, main effects and interactions were significant. Functional measurement analyses revealed that brand name effects were independent of product quality. In conclusion, the brand name associated with a product led people to evaluate quality of that product as either higher or lower depending on the strength of the brand name.

Does level of specificity affect measures of motivation to comply? A randomized evaluation.

Science.gov (United States)

Branscum, Paul; Senkowski, Valerie

2018-05-30

The theory of planned behavior (TPB) is a popular value-expectancy model in social and behavioral health. Motivation to comply, one of the theory's constructs, has not been well operationalized and measured in the past, and to date, there has been no assessment of whether level of specificity affects the measurement of the construct. The purpose of this study was to measure the motivation to comply construct across four domains (from general to TACT-behavior specific) and evaluate the potential impact the differences have when identifying determinants of generalized injunctive norms. Students (n = 234) attending a large southwestern university completed a TPB survey related to sleep and physical activity, and were randomized to one of four domains that measured motivation to comply (General domain, n = 58; Health domain, n = 60; Behavioral domain, n = 56; and TACT domain, n = 60). Across both behaviors, motivation to comply measurements did not appear to be affected by changing the level of specificity. Referents for sleep and physical activity were mostly significant, but the effects were small to medium. Future researchers should consider removing motivation to comply measures from TPB surveys to reduce respondent burden or find alternative ways of measuring the construct.

Neonicotinoid insecticides negatively affect performance measures of non‐target terrestrial arthropods: a meta‐analysis

Science.gov (United States)

Main, Anson; Webb, Elisabeth B.; Goyne, Keith W.; Mengel, Doreen C.

2018-01-01

Neonicotinoid insecticides are currently the fastest‐growing and most widely used insecticide class worldwide. Valued for their versatility in application, these insecticides may cause deleterious effects in a range of non‐target (beneficial) arthropods. However, it remains unclear whether strong patterns exist in terms of their major effects, if broad measures of arthropod performance are negatively affected, or whether different functional groups are equally vulnerable. Here, we present a meta‐analysis of 372 observations from 44 field and laboratory studies that describe neonicotinoid effects on 14 arthropod orders across five broad performance measures: abundance, behavior, condition, reproductive success, and survival. Across studies, neonicotinoids negatively affected all performance metrics evaluated; however, magnitude of the effects varied. Arthropod behavior and survival were the most negatively affected and abundance was the least negatively affected. Effects on arthropod functional groups were inconsistent. Pollinator condition, reproductive success, and survival were significantly lower in neonicotinoid treatments compared to untreated controls; whereas, neonicotinoid effects on detritivores were not significant. Although magnitude of arthropod response to neonicotinoids varied among performance measures and functional groups, we documented a consistent negative relationship between exposure to neonicotinoid insecticides in published studies and beneficial arthropod performance.

Initial pH of medium affects organic acids production but do not affect phosphate solubilization.

Science.gov (United States)

Marra, Leandro M; de Oliveira-Longatti, Silvia M; Soares, Cláudio R F S; de Lima, José M; Olivares, Fabio L; Moreira, Fatima M S

2015-06-01

The pH of the culture medium directly influences the growth of microorganisms and the chemical processes that they perform. The aim of this study was to assess the influence of the initial pH of the culture medium on the production of 11 low-molecular-weight organic acids and on the solubilization of calcium phosphate by bacteria in growth medium (NBRIP). The following strains isolated from cowpea nodules were studied: UFLA03-08 (Rhizobium tropici), UFLA03-09 (Acinetobacter sp.), UFLA03-10 (Paenibacillus kribbensis), UFLA03-106 (Paenibacillus kribbensis) and UFLA03-116 (Paenibacillus sp.). The strains UFLA03-08, UFLA03-09, UFLA03-10 and UFLA03-106 solubilized Ca3(PO4)2 in liquid medium regardless of the initial pH, although without a significant difference between the treatments. The production of organic acids by these strains was assessed for all of the initial pH values investigated, and differences between the treatments were observed. Strains UFLA03-09 and UFLA03-10 produced the same acids at different initial pH values in the culture medium. There was no correlation between phosphorus solubilized from Ca3(PO4)2 in NBRIP liquid medium and the concentration of total organic acids at the different initial pH values. Therefore, the initial pH of the culture medium influences the production of organic acids by the strains UFLA03-08, UFLA03-09, UFLA03-10 and UFLA03-106 but it does not affect calcium phosphate solubilization.

The iMTA Productivity Cost Questionnaire: A Standardized Instrument for Measuring and Valuing Health-Related Productivity Losses.

Science.gov (United States)

Bouwmans, Clazien; Krol, Marieke; Severens, Hans; Koopmanschap, Marc; Brouwer, Werner; Hakkaart-van Roijen, Leona

2015-09-01

Productivity losses often contribute significantly to the total costs in economic evaluations adopting a societal perspective. Currently, no consensus exists on the measurement and valuation of productivity losses. We aimed to develop a standardized instrument for measuring and valuing productivity losses. A group of researchers with extensive experience in measuring and valuing productivity losses designed an instrument suitable for self-completion, building on preknowledge and evidence on validity. The instrument was designed to cover all domains of productivity losses, thus allowing quantification and valuation of all productivity losses. A feasibility study was performed to check the questionnaire's consistency and intelligibility. The iMTA Productivity Cost Questionnaire (iPCQ) includes three modules measuring productivity losses of paid work due to 1) absenteeism and 2) presenteeism and productivity losses related to 3) unpaid work. Questions for measuring absenteeism and presenteeism were derived from existing validated questionnaires. Because validated measures of losses of unpaid work are scarce, the questions of this module were newly developed. To enhance the instrument's feasibility, simple language was used. The feasibility study included 195 respondents (response rate 80%) older than 18 years. Seven percent (n = 13) identified problems while filling in the iPCQ, including problems with the questionnaire's instructions and routing (n = 6) and wording (n = 2). Five respondents experienced difficulties in estimating the time that would be needed for other people to make up for lost unpaid work. Most modules of the iPCQ are based on validated questions derived from previously available instruments. The instrument is understandable for most of the general public. Copyright © 2015 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

The effect of the spatial positioning of items on the reliability of questionnaires measuring affect

Directory of Open Access Journals (Sweden)

Leigh Leo

2016-08-01

Full Text Available Orientation: Extant research has shown that the relationship between spatial location and affect may have pervasive effects on evaluation. In particular, experimental findings on embodied cognition indicate that a person is spatially orientated to position what is positive at the top and what is negative at the bottom (vertical spatial orientation, and to a lesser extent, to position what is positive on the left and what is negative on the right (horizontal spatial orientation. It is therefore hypothesised, that when there is congruence between a respondent’s spatial orientation (related to affect and the spatial positioning (layout of a questionnaire, the reliability will be higher than in the case of incongruence. Research purpose: The principal objective of the two studies reported here was to ascertain the extent to which congruence between a respondent’s spatial orientation (related to affect and the layout of the questionnaire (spatial positioning of questionnaire items may impact on the reliability of a questionnaire measuring affect. Motivation for the study: The spatial position of items on a questionnaire measuring affect may indirectly impact on the reliability of the questionnaire. Research approach, design and method: In both studies, a controlled experimental research design was conducted using a sample of university students (n = 1825. Major findings: In both experiments, evidence was found to support the hypothesis that greater congruence between a respondent’s spatial orientation (related to affect and the spatial positioning (layout of a questionnaire leads to higher reliability on a questionnaire measuring affect. Practical implications: These findings may serve to create awareness of the influence of the spatial positioning of items as a confounding variable in questionnaire design. Contribution/value-add: Overall, this research complements previous studies by confirming the metaphorical representation of affect and

Well-being as a moving target: measurement equivalence of the Bradburn Affect Balance Scale.

Science.gov (United States)

Maitland, S B; Dixon, R A; Hultsch, D F; Hertzog, C

2001-03-01

Although the Bradburn Affect Balance scale (ABS) is a frequently used two-factor indicator of well-being in later life, its measurement and invariance properties are not well documented. We examined these issues using confirmatory factor analyses of cross-sectional (adults ages 54-87 years) and longitudinal data from the Victoria Longitudinal Study. Stability of the positive and negative affect factors was moderate across a 3-year period. Overall, factor loadings for positive affect items were invariant over time with the exception of the pleased item. Negative affect items were time invariant. However, age-group comparisons between young-old and old-old groups revealed age differences in loadings for the upset item at Time 1. Finally, gender groups differed in loadings for the top of the world and going your way items. Thus a pattern of partial measurement equivalence characterized item response to the ABS. Our results suggest that group comparisons and longitudinal change in ABS scale scores of positive and negative affect should be interpreted with caution.

Di-boson production measurements with the ATLAS detector

CERN Document Server

Chevalier, Laurent; The ATLAS collaboration

2015-01-01

Measurements diboson production cross sections in proton-proton interactions at 7 and 8 TeV are reported from the ATLAS experiment. The cross section results are measured in phase space regions defined by the decay kinematics and then extrapolated to the full phase spaces. Cross sections for WV (V=W or Z) production in the leptonic or semileptonic channels are compared to (N)NLO predictions of the Standard Model and are used to place constraints on anomalous triple-gauge-boson couplings. First LHC Run-2 results will be included if available.

Phytoplankton virus production negatively affected by iron limitation

Directory of Open Access Journals (Sweden)

Hans A Slagter

2016-08-01

Full Text Available Fe-limited monocultures of the ubiquitous algae Micromonas pusilla and Phaeocystis globosa were infected with their respective viruses (MpV and PgV to ascertain the effect of Fe-limitation on phytoplankton host-virus dynamics. The effect of the viral shunt on Fe concentrations and bioavailability is starting to gain attention, since not only is Fe released through lysis, but also its solubility is increased by the simultaneous release of Fe-binding dissolved organic ligands. However, the effect of Fe-limitation on the process of viral lysis itself is poorly understood. In this study fine adjustment of a seawater-based culture medium including the use of ultra-clean trace metal conditions and protocols allowed for Fe-limited growth at nanomolar amounts as opposed to micromolar amounts typically employed in culturing. Viral lysates derived from Fe-limited and Fe-replete (for comparison hosts were cross-inoculated in hosts of both Fe treatments, to judge the quality of the resulting lysate as well as the effect of Fe introduction after initial infection. For both phytoplankton host-virus systems, the virus burst size reduced strongly under Fe stress, i.e. on average 28 ±1% of replete. Moreover, the MpV virus progeny showed highly reduced infectivity of 30±7%, whereas PgV infectivity was not affected. A small addition of Fe to Fe-limited cultures coming from the Fe-replete lysate counteracted the negative effect of Fe-limitation on phytoplankton virus production to some extent (but still half of replete, implying that the physiological history of the host at the moment of infection was an important underlying factor. These results indicate that Fe-limitation has the strong potential to reduce the loss of phytoplankton due to virus infection, thereby affecting the extent of Fe-cycling through the viral shunt. To what extent this affects the contribution of viral lysis-induced organic ligand release needs further study.

ANALYSES OF FACTORS THAT AFFECT MILK PRODUCTION AT FARM LEVEL AND BY BRAZILIAN ESTATES

Directory of Open Access Journals (Sweden)

Geicimara Guimarães

2011-12-01

Full Text Available The objective was to evaluate some technical indexes that affect milk production by rural producer and by state of federation. In the first study, information were obtained from 50 rural producers, suppliers of a milk dairy plant in the south region of Rio de Janeiro, including the daily production of milk by a producer, the total area of the property, area for the dairy herd, lactating cows only and total cows from the herd, cooling mode, type and number of milkings, breeds and genetic improvement. In the second study, data were collected from EMBRAPA and IBGE in the years 2004-2006, where the emphasis was on milk production by State instead of production per producer. In both cases, the increase in milk production happens by increase in the number of animals in the herd (r=0.94; first case and milking cows (r=0.93 and 0.95, respectively, with low correlation between productivity per animal and per area with milk production (r

Measuring the coolness of interactive products

DEFF Research Database (Denmark)

Bruun, Anders; Raptis, Dimitrios; Kjeldskov, Jesper

2016-01-01

Coolness has recently started to be explored as a design goal for interactive products from practitioners as well as researchers within human–computer interaction (HCI), but there is still a need to further operationalise the concept and explore how we can measure it. Our contribution in this paper...

A Quantitative Approach to Variables Affecting Production of Short Films in Turkey

Directory of Open Access Journals (Sweden)

Vedat Akman

2011-08-01

Full Text Available This study aims to explore the influence of various variables affecting the production of migration themed short films in Turkey. We proceeded to our analysis using descriptive statistics to describe the main futures of the sample data quantitatively. Due to non-uniformity of the data available, we were unable to use inductive statistics. Our basic sample statistical results indicated that short film producers prefered to produce short films on domestic migration theme rather than international. Gender and university seemed on surface as significant determinants to the production of migration themed short films in Turkey. We also looked at the demografic variables to provide more insights into our quantitative approach.

Implications of energy efficiency measures in wheat production

DEFF Research Database (Denmark)

Meyer-Aurich, Andreas; Ziegler, T.; Scholz, L.

The economic and environmental effect of energy saving measures were analyzed for a typical wheat production system in Germany. The introduction of precision farming, reduced nitrogen fertilization and improved crop drying technologies proved to be efficient measures for enhancing energy efficiency...

Analytical measurements of fission products during a severe nuclear accident

Science.gov (United States)

Doizi, D.; Reymond la Ruinaz, S.; Haykal, I.; Manceron, L.; Perrin, A.; Boudon, V.; Vander Auwera, J.; tchana, F. Kwabia; Faye, M.

2018-01-01

The Fukushima accident emphasized the fact that ways to monitor in real time the evolution of a nuclear reactor during a severe accident remain to be developed. No fission products were monitored during twelve days; only dose rates were measured, which is not sufficient to carry out an online diagnosis of the event. The first measurements were announced with little reliability for low volatile fission products. In order to improve the safety of nuclear plants and minimize the industrial, ecological and health consequences of a severe accident, it is necessary to develop new reliable measurement systems, operating at the earliest and closest to the emission source of fission products. Through the French program ANR « Projet d'Investissement d'Avenir », the aim of the DECA-PF project (diagnosis of core degradation from fission products measurements) is to monitor in real time the release of the major fission products (krypton, xenon, gaseous forms of iodine and ruthenium) outside the nuclear reactor containment. These products are released at different times during a nuclear accident and at different states of the nuclear core degradation. Thus, monitoring these fission products gives information on the situation inside the containment and helps to apply the Severe Accident Management procedures. Analytical techniques have been proposed and evaluated. The results are discussed here.

Analytical measurements of fission products during a severe nuclear accident

Directory of Open Access Journals (Sweden)

Doizi D.

2018-01-01

Full Text Available The Fukushima accident emphasized the fact that ways to monitor in real time the evolution of a nuclear reactor during a severe accident remain to be developed. No fission products were monitored during twelve days; only dose rates were measured, which is not sufficient to carry out an online diagnosis of the event. The first measurements were announced with little reliability for low volatile fission products. In order to improve the safety of nuclear plants and minimize the industrial, ecological and health consequences of a severe accident, it is necessary to develop new reliable measurement systems, operating at the earliest and closest to the emission source of fission products. Through the French program ANR « Projet d’Investissement d’Avenir », the aim of the DECA-PF project (diagnosis of core degradation from fission products measurements is to monitor in real time the release of the major fission products (krypton, xenon, gaseous forms of iodine and ruthenium outside the nuclear reactor containment. These products are released at different times during a nuclear accident and at different states of the nuclear core degradation. Thus, monitoring these fission products gives information on the situation inside the containment and helps to apply the Severe Accident Management procedures. Analytical techniques have been proposed and evaluated. The results are discussed here.

Productivity benefits of industrial energy efficiency measures

Energy Technology Data Exchange (ETDEWEB)

Worrell, Ernst; Laitner, John A.; Michael, Ruth; Finman, Hodayah

2004-08-30

We review the relationship between energy efficiency improvement measures and productivity in industry. We review over 70 industrial case studies from widely available published databases, followed by an analysis of the representation of productivity benefits in energy modeling. We propose a method to include productivity benefits in the economic assessment of the potential for energy efficiency improvement. The case-study review suggests that energy efficiency investments can provide a significant boost to overall productivity within industry. If this relationship holds, the description of energy-efficient technologies as opportunities for larger productivity improvements has significant implications for conventional economic assessments. The paper explores the implications this change in perspective on the evaluation of energy-efficient technologies for a study of the iron and steel industry in the US. This examination shows that including productivity benefits explicitly in the modeling parameters would double the cost-effective potential for energy efficiency improvement, compared to an analysis excluding those benefits. We provide suggestions for future research in this important area.

Testing Measurement Invariance of the Students' Affective Characteristics Model across Gender Sub-Groups

Science.gov (United States)

Demir, Ergül

2017-01-01

In this study, the aim was to construct a significant structural measurement model comparing students' affective characteristics with their mathematic achievement. According to this model, the aim was to test the measurement invariances between gender sub-groups hierarchically. This study was conducted as basic and descriptive research. Secondary…

The effect of feeding on CO2 production and energy expenditure in ponies measured by indirect calorimetry and the 13C-bicarbonate technique

DEFF Research Database (Denmark)

Jensen, Rasmus Bovbjerg; Kyrstein, T. D.; Junghans, P

2015-01-01

Energy expenditure (EE) can be estimated based on respiratory gas exchange measurements, traditionally done in respiration chambers by indirect calorimetry (IC). However, the (13)C-bicarbonate technique ((13)C-BT) might be an alternative minimal invasive method for estimation of CO(2) production...... and EE in the field. In this study, four Shetland ponies were used to explore the effect of feeding on CO(2) production and EE measured simultaneously by IC and (13)C-BT. The ponies were individually housed in respiration chambers and received either a single oral or intravenous (IV) bolus dose of (13)C......-bicarbonate at the three different feeding times. Feeding time affected the CO(2) production (P

Election results of Southwest ballot measures affecting healthcare

Directory of Open Access Journals (Sweden)

Robbins RA

2016-11-01

Full Text Available No abstract available. Article truncated after 150 words. Earlier this week an article was posted listing Southwest ballot measures that affect healthcare. Below are the results obtained from various internet sources. States: Arizona: 1. Recreational marijuana. Proposition 205: Legalizes recreational marijuana use for people 21 and older. Opponents of the measure include the Arizona Health and Hospital Association and Insys Therapeutics, a company that makes a cannabis-based pain medication. Defeated: Yes 929,518 (48% No 1,011,836 (52%. California 1.Medi-Cal hospital fee program. Proposition 52: Requires the legislature to get voter approval to use fee revenue for purposes other than generating federal matching funds and funding enhanced Medicaid payments and grants for hospitals. The initiative, which was written by the California Hospital Association and is supported by most state lawmakers, would also make the program permanent, requiring a supermajority in the legislature to end it. Passed: Yes 5,950,642 (70% No 2,599,764 (30%. 2. Tobacco tax. Proposition 56: Increases the ...

Measurement of Single-top Quark Production with the ATLAS Detector

CERN Document Server

Holzbauer, J L

2011-01-01

Single-top production has been studied with the ATLAS detector using 0.7 fb-1 of 2011 data recorded at 7 TeV center-of-mass energy. The measurement of electroweak production of top-quarks allows probes of the Wtb vertex and a direct measurement of the CKM matrix element |V_tb|. It is also expected to be sensitive to new physics such as flavor changing neutral currents or heavy W production. The t-channel cross-section measurements are performed using both a cut-based and neural network approach, while a cut-based selection in the dilepton channel is used to derive a limit on the associated (Wt) production. An observed cross-section of 90 +32 -22 pb (65 +28 -19 pb expected) is obtained for the t-channel, which is consistent with the Standard Model expectation. For the Wt production, an observed limit of < 39.1 pb (40.6 pb expected) is derived, which corresponds to about 2.5 times the Standard Model expectation.

Thickness measuring instrument for rubber cord calender production

International Nuclear Information System (INIS)

Ye Songfeng

1988-01-01

The thickness measuring gauge has been used to measure the rubber film thickness on the coating of textile cord at tire four cord calenders. Combined with micro-computer it completes the automatic control system and acheives automatic thickness measurement and adjustment. The fundamentals, construction, specifications, characteristic and application results are described. Prominent economic benefit has been gained for tire production

Auto-inflammatory challenge of the endolymphatic sac - Cochlear damage measured by distortion product oto-acoustic emissions

DEFF Research Database (Denmark)

Larsen, Michael; Friis, Morten; Karlsen, Charlotte Vestrup

2015-01-01

CONCLUSION: Twenty-five rats were challenged by an immunologic attack of the endolymphatic sac. After 6 months, distortion product oto-acoustic emissions (DPOAE) revealed a dysfunction of the outer hair cells and immunological active cells were observed in the endolymphatic sac. This information...... could contribute to the understanding of Ménière's disease. OBJECTIVES: This study investigated if an autoimmune challenge of the endolymphatic sac could affect DPOAE output measurements in rats. Also, a potential autoimmune cell infiltration of the endolymphatic sac was investigated. METHODS: Eighteen...

Development of a portable instrument to measure ozone production rates in the troposphere

Science.gov (United States)

Sklaveniti, Sofia; Locoge, Nadine; Stevens, Philip; Kumar, Vinod; Sinha, Vinayak; Dusanter, Sébastien

2015-04-01

Ground-level ozone is a key species related to air pollution, causing respiratory problems, damaging crops and forests, and affecting the climate. Our current understanding of the tropospheric ozone-forming chemistry indicates that net ozone production occurs via reactions of peroxy radicals (HO2 + RO2) with NO producing NO2, whose photolysis leads to O3 formation. Production rates of tropospheric ozone, P(O3), depend on concentrations of oxides of nitrogen (NOx = NO + NO2) and Volatile Organic Compounds (V OCs), but also on production rates of ROx radicals (OH + HO2 + RO2). The formation of ozone follows a complex nonlinear chemistry that makes strategies for reducing ozone difficult to implement. In this context, atmospheric chemistry models are used to develop emission regulations, but there are still uncertainties associated with the chemical mechanisms used in these models. Testing the ozone formation chemistry in atmospheric models is needed, in order to ensure the development of effective strategies for ozone reduction. We will present the development of an instrument for direct measurements of ozone production rates (OPR) in ambient air. The OPR instrument is made of three components: (i) two quartz flow tubes to sample ambient air, one exposed to solar radiation and one covered by a UV filter, (ii) a NO2-to-O3 conversion unit, and (iii) an ozone analyzer. The total amount of ozone exiting each flow tube is conserved in the form of Ox = NO2 + O3. Ozone production rates P(O3) are derived from the difference in Ox concentration between the two flow tubes, divided by the exposure time of air inside the flow tubes. We will present studies that were carried out in the laboratory to characterize each part of the instrument and we will discuss the performances of the OPR instrument based on experiments carried out using synthetic air mixtures of known composition (NOx and V OCs). Chemical modeling will also be presented to assess the reliability of ozone

Breed of cow and herd productivity affect milk nutrient recovery in curd, and cheese yield, efficiency and daily production.

Science.gov (United States)

Stocco, G; Cipolat-Gotet, C; Gasparotto, V; Cecchinato, A; Bittante, G

2018-02-01

Little is known about cheese-making efficiency at the individual cow level, so our objective was to study the effects of herd productivity, individual herd within productivity class and breed of cow within herd by producing, then analyzing, 508 model cheeses from the milk of 508 cows of six different breeds reared in 41 multi-breed herds classified into two productivity classes (high v. low). For each cow we obtained six milk composition traits; four milk nutrient (fat, protein, solids and energy) recovery traits (REC) in curd; three actual % cheese yield traits (%CY); two theoretical %CYs (fresh cheese and cheese solids) calculated from milk composition; two overall cheese-making efficiencies (% ratio of actual to theoretical %CYs); daily milk yield (dMY); and three actual daily cheese yield traits (dCY). The aforementioned phenotypes were analyzed using a mixed model which included the fixed effects of herd productivity, parity, days in milk (DIM) and breed; the random effects were the water bath, vat, herd and residual. Cows reared in high-productivity herds yielded more milk with higher nutrient contents and more cheese per day, had greater theoretical %CY, and lower cheese-making efficiency than low-productivity herds, but there were no differences between them in terms of REC traits. Individual herd within productivity class was an intermediate source of total variation in REC, %CY and efficiency traits (10.0% to 17.2%), and a major source of variation in milk yield and dCY traits (43.1% to 46.3%). Parity of cows was an important source of variation for productivity traits, whereas DIM affected almost all traits. Breed within herd greatly affected all traits. Holsteins produced more milk, but Brown Swiss cows produced milk with higher actual and theoretical %CYs and cheese-making efficiency, so that the two large-framed breeds had the same dCY. Compared with the two large-framed breeds, the small Jersey cows produced much less milk, but with greater actual

Efficiency and Import Penetrationon the Productivity of Textile Industry and Textile Products

Directory of Open Access Journals (Sweden)

Catur Basuki Rakhmawan

2012-12-01

Full Text Available Although textile industry and textile products belong to the strategic sub-sector of manufacturing industry in Indonesia, they are facing problems on the availability of energy, old production machines, and the flooding of imported products into the domestic market. This study is aimed to analyze the efficiency and productivity as performance indicators and how the efficiency and import penetration affect the productivity of textile industry and textile products. The methods of data analysis used in this research are divided in two phases. The first phase, the non-metric approach of Data Envelopment Analysis (DEA is applied to measure the efficiency and productivity. Secondly, the fixed effect model of econometric regression approach is used to find out the effects of efficiency and import penetration on the productivity of textile industry and textile products. The result shows that the ave-rage level of efficiency of textile industry and textile products during the period of 2004 – 2008 is about 40 percent with a growth rate of average productivity increases 2.4 percent. Whereas, the econometric estimation results indicate that the increase of efficiency will positively and significantly affect the productivity of textile industry and textile products. On the other hand, the increase of import penetration will negatively affect the productivity of this industry.

Measurement of the perceived quality of a product

Directory of Open Access Journals (Sweden)

Maire J.-L.

2013-01-01

Full Text Available For some companies, visual inspection has become an essential step when seeking to improve the quality of their products. The aim of this control is to be sure of the perceived quality of the product, which often goes well beyond the quality expected by the customer. For this type of control, the controller should be able to detect any anomaly on a product, characterize this anomaly, and then evaluate it in order to decide if the product should be accepted or rejected. This paper describes how this characterization can be carried out and, more specifically, how to measure the impact of the local environment of an anomaly on the perceived quality of the product.

Affects and Affect Consciousness

Science.gov (United States)

MONSEN, JON T.; EILERTSEN, DAG ERIK; MELGÅRD, TROND; ØDEGÅRD, PÅL

1996-01-01

Affect consciousness (AC) was operationalized as degrees of awareness, tolerance, nonverbal expression, and conceptual expression of nine specific affects. A semistructured interview (ACI) and separate scales were developed to assess these aspects of affect integration. Their psychometric properties were preliminarily explored by having 20 former psychiatric outpatients complete the interview. Concurrent validity was assessed by using DSM-III-R Axis I and II diagnoses, the Health-Sickness Rating Scale, SCL-90-R, and several indexes from the Minnesota Multiphasic Personality Inventory. Satisfactory interrater reliability and high levels of internal consistency supported the construct validity of the measure. Results suggest the most meaningful use of this instrument is in measuring specific affect and overall AC. Clinically, the ACI has provided highly specific and relevant qualitative data for use in planning psychotherapeutic interventions. PMID:22700292

ALICE measurements of heavy-flavour production at the LHC

CERN Multimedia

CERN. Geneva

2012-01-01

The measurement of open charm and beauty production in Pb-Pb collisions at the LHC gives access to the mechanisms of heavy-quark transport and energy loss in hot and dense QCD matter. The ALICE apparatus allows us to measure heavy flavour particles over a wide acceptance, using hadronic and electronic final states at central rapidity and muonic final states at forward rapidity, in both cases with coverage down to low transverse momentum. These measurements, in pp collisions, besides constituting the reference for the heavy-ion studies, provide acceptance-wise unique information on heavy-quark production at LHC energies. After presenting results for pp collisions at centre-of-mass energies of 2.76 and 7 TeV, we focus on the observation of the suppression of heavy-flavour production in central Pb-Pb collisions and of the azimuthal anisotropy of charmed hadrons in semi-central collisions at 2.76 TeV.

Factors Affecting Adoption of Recommended Cauliflower Production Technology in Nepal

Directory of Open Access Journals (Sweden)

Pankaj Raj Dhital

2016-05-01

Full Text Available Binary logit regression model of econometrics was used to identify the factors affecting adoption of recommended agricultural technology by the commercial farmers of Nepal. A survey was carried out in 2012 in 120 households from Kavre district, Nepal. The objective was to appraise factors affecting adoption of recommended technology of cauliflower, finding out the level of adoption, identifying the constraints of cauliflower cultivation, assessing the perceived level of satisfaction and studying the relationship of certain selected variables on the adoption. Education, Occupation, contact with Personal Localite sources of information, Group membership and Experience were the most influencing factors for adoption of recommended technology. Though, other factors were not strong enough to contribute significantly but indirectly influence the adoption decision of farmers as combined effects. Occupation was found as negatively associated. Landholding size was strongly and positively influencing among the non significant factors. The level of satisfaction and the constraints of cauliflower production were also identified. Transfer of technology will be effective if and only if the client adopts the technology. For an effective transfer of technology, it is better to go for activities for the welfare of the socioeconomic factors of the farmers.

Measurement of Scientific Productivity in R&D Sector: Changing paradigm.

Science.gov (United States)

Kumar, Abhishek; Srivastava, Alpana; Kumar, R P Jeevan; Tiwari, Rajesh K

2017-01-01

Scientific Productivity is a demand of policy makers for a judicious utilization of massive R&D budget allocated and utilized. A huge mass of intellectual assets is employed, which after investing manpower, infrastructure and lab consumables demand for a major outcome which contributes towards building nation's economy. Scientific productivity was only measured through publications or patents. Patents, earmarked as a strong parameter for innovation generation, where, Word Intellectual Property Organisation generated a data on applications for the top 20 offices for patents, where Australia, Brazil and Canada occupied top 3 positions. India ranked 9th with the total patent applications rising from 39762 (2010) to 42854 (2014) i.e. 15%, whereas, it contributes around 2% Patents (innovative productivity) on global scale. Many studies have come forward interestingly within scientific and academic domains in the form of measurement of scientific performance, however, development of productivity indicators and calculation of Scientific Productivity (SP) as a holistic evaluation system is a significant demand. SP, a herculean task is envisaged for productivity analysis and would submit significant factors towards fabricating an effective measurement engine in a holistic manner viable for an individual and organization, being supplementary to each other. This review projects the significance of performance measurement system in R&D through identification and standardization of key parameters. It also includes emphasis on inclusion of standardized parameters, effective for performance measurement which is applicable for scientists, technical staff as well as lab as a facility. This review aims at providing an insight to the evaluators, policy makers, and high level scientific panels to stimulate the scientific intellects on identified indicators so that their work proceeds to generate productive outcome contributing to the economic growth. Copyright© Bentham Science

Towards improving construction labor productivity and projects’ performance

Directory of Open Access Journals (Sweden)

Mostafa E. Shehata

2011-12-01

Full Text Available Proper management of resources in construction projects can yield substantial savings in time and cost. As construction is a labor-intensive industry, this paper focuses on labor productivity in the construction industry. This study considers the current state-of-the-art issues relevant to this subject. It covers the construction labor productivity definitions, aspects, measurements, factors affecting it, different techniques used for measuring it and modeling techniques. The main outcome from the literature is that there is no standard definition of productivity. This study provides a guide for necessary steps required to improve construction labor productivity and consequently, the project performance. It can help improve the overall performance of construction projects through the implementation of the concept of benchmarks. Also, it gives an up to date concept of loss of productivity measurement for construction productivity claims. Two major case studies, from the literature, are presented to show construction labor productivity rates, factors affecting construction labor productivity and how to improve it.

Engaged or exhausted—How does it affect dentists’ clinical productivity?

Directory of Open Access Journals (Sweden)

Jari J. Hakanen

2014-06-01

Full Text Available This cross-sectional study examines whether job burnout (exhaustion and work engagement are associated with the clinical productivity of dentists measured by the amount of paid procedure fees in a single month. We conducted an OLS regression analyses of data on dentists working at municipal health centers in Finland (N = 269; response rate 37%. The results indicated that work engagement was positively associated with the amount of procedure fees and consequently with dentists’ pay level after several work-related and demographic background variables were controlled for. However, exhaustion was not related to productivity after controlling for the impact of other factors.

Oral warfarin affects peripheral blood leukocyte IL-6 and TNFα production in rats.

Science.gov (United States)

Popov, Aleksandra; Belij, Sandra; Subota, Vesna; Zolotarevski, Lidija; Mirkov, Ivana; Kataranovski, Dragan; Kataranovski, Milena

2013-01-01

Warfarin is a Vitamin K (VK) antagonist that affects Vitamin K-dependent (VKD) processes, including blood coagulation, as well as processes unrelated to hemostasis such as bone growth, calcification, and growth of some cell types. In addition, warfarin exerts influence on some non-VKD-related activities, including anti-tumor and immunomodulating activity. With respect to the latter, both immune stimulating and suppressive effects have been noted in different experimental systems. To explore the in vivo immunomodulatory potential of warfarin on one type of activity (i.e., cytokine production) in two different immune cell populations (i.e., mononuclear or polymorphonuclear cells), effects of subchronic oral warfarin intake in rats on pro-inflammatory cytokine (i.e., TNFα, IL-6) production by peripheral blood mononuclear and polymorphonuclear cells (granulocytes) was examined. Differential effects of warfarin intake on TNFα and IL-6 were noted, depending on the type of peripheral blood leukocytes and on the cytokine examined. Specifically, a lack of effect on TNFα and a priming of IL-6 production by mononuclear cells along with a decrease in TNFα and a lack of effect on IL-6 in polymorphonuclear cells were seen in warfarin-exposed hosts. The cell- and cytokine-dependent effects from subchronic oral warfarin intake on peripheral blood leukocytes demonstrated in this study could, possibly, differentially affect reactions mediated by these cells. Ultimately, the observed effects in rats might have implications for those humans who are on long-term/prolonged warfarin therapy.

LHCb: Measurement of $D^{\\pm}$ Production Asymmetry at LHCb

CERN Multimedia

Xing, Zhou

2012-01-01

Heavy quark production in 7 TeV pp collisions at the LHC need not be flavour symmetric. Here the production asymmetry, $A_p$ , between $D_s^+$ and $D_s^-$ mesons is measured using the $\\phi\\pi$ decay mode. The difference between $\\pi^+$ and $\\pi^-$ detection efficiencies is measured using the ratio of fully reconstructed to partially reconstructed $D^*$ decays. Using 1 fb$^{-1}$ of data collected with the LHCb detector, we find $A_p = (-0.39 \\pm 0.22 \\pm 0.08)$%.

Exposure to Poverty and Productivity.

Directory of Open Access Journals (Sweden)

Patricio S Dalton

Full Text Available We study whether exposure to poverty can induce affective states that decrease productivity. In a controlled laboratory setting, we find that subjects randomly assigned to a treatment, in which they view a video featuring individuals that live in extreme poverty, exhibit lower subsequent productivity compared to subjects assigned to a control treatment. Questionnaire responses, as well as facial recognition software, provide quantitative measures of the affective state evoked by the two treatments. Subjects exposed to images of poverty experience a more negative affective state than those in the control treatment. Further analysis shows that individuals in a more positive emotional state exhibit less of a treatment effect. Also, those who exhibit greater attentiveness upon viewing the poverty video are less productive. The results are consistent with the notion that exposure to poverty can induce a psychological state in individuals that adversely affects productivity.

Exposure to Poverty and Productivity

Science.gov (United States)

2017-01-01

We study whether exposure to poverty can induce affective states that decrease productivity. In a controlled laboratory setting, we find that subjects randomly assigned to a treatment, in which they view a video featuring individuals that live in extreme poverty, exhibit lower subsequent productivity compared to subjects assigned to a control treatment. Questionnaire responses, as well as facial recognition software, provide quantitative measures of the affective state evoked by the two treatments. Subjects exposed to images of poverty experience a more negative affective state than those in the control treatment. Further analysis shows that individuals in a more positive emotional state exhibit less of a treatment effect. Also, those who exhibit greater attentiveness upon viewing the poverty video are less productive. The results are consistent with the notion that exposure to poverty can induce a psychological state in individuals that adversely affects productivity. PMID:28125621

Dimensional measurements with submicrometer uncertainty in production environment

DEFF Research Database (Denmark)

De Chiffre, L.; Gudnason, M. M.; Madruga, D.

2015-01-01

The work concerns a laboratory investigation of a method to achieve dimensional measurements with submicrometer uncertainty under conditions that are typical of a production environment. The method involves the concurrent determination of dimensions and material properties from measurements carried...... gauge blocks along with their uncertainties were estimated directly from the measurements. The length of the two workpieces at the reference temperature of 20 °C was extrapolated from the measurements and compared to certificate values. The investigations have documented that the developed approach...

Method s for Measuring Productivity in Libraries and Information Centres

Directory of Open Access Journals (Sweden)

Mohammad Alaaei

2009-04-01

Full Text Available   Within Information centers, productivity is the result of optimal and effective use of information resources, service quality improvement, increased user satisfaction, pleasantness of working environment, increased motivation and enthusiasm of staff to work better. All contribute to the growth and development of information centers. Thus these centers would need to be familiar with methods employed in productivity measurement. Productivity is one of the criteria for evaluating system performance. In the past decades particular emphasis has been placed on measurement and improvement of human resource, creativity, innovation and expert analysis. Contemplation and efforts made towards identification of problems and issues and new means to make more useful and better resource management is the very definition of productivity. Simply put, productivity is the relationship between system output and the elements garnered to produce these outputs. The causality between variables and factors impacting on productivity is very complex. In information centers, given the large volume of elements involved, it seems necessary to increase efficiency and productivity

Is there an association between subjective and objective measures of cognitive function in patients with affective disorders?

DEFF Research Database (Denmark)

Svendsen, Anne M; Kessing, Lars V; Munkholm, Klaus

2012-01-01

.01) but there were no differences between patient groups (P > 0.1). We found no correlation between subjectively experienced and objectively measured cognitive dysfunction in BD (P = 0.7), and a non-significant trend towards a correlation in UD (P = 0.06), which disappeared when controlling for gender (P = 0......Background: Patients with affective disorders experience cognitive dysfunction in addition to their affective symptoms. The relationship between subjectively experienced and objectively measured cognitive function is controversial with several studies reporting no correlation between subjective...... and objective deficits. Aims: To investigate whether there is a correlation between subjectively reported and objectively measured cognitive function in patients with affective disorders, and whether subjective complaints predict objectively measured dysfunction. Methods: The study included 45 participants; 15...

Efficiency and Import Penetration on the Productivity of Textile Industry and Textile Products

Directory of Open Access Journals (Sweden)

Catur Basuki Rakhmawan

2012-12-01

Full Text Available Although textile industry and textile products belong to the strategic sub-sector of manufacturing industry in Indonesia, they are facing problems on the availability of energy, old production machines, and the flooding of imported products into the domestic market. This study is aimed to analyze the efficiency and productivity as performance indicators and how the efficiency and import penetration affect the productivity of textile industry and textile products. The methods of data analysis used in this research are divided in two phases. The first phase, the non-metric approach of Data Envelopment Analysis (DEA is applied to measure the efficiency and productivity. Secondly, the fixed effect model of econometric regression approach is used to find out the effects of efficiency and import penetration on the productivity of textile industry and textile products. The result shows that the average level of efficiency of textile industry and textile products during the period of 2004 – 2008 is about 40 percent with a growth rate of average productivity increases 2.4 percent. Whereas, the econometric estimation results indicate that the increase of efficiency will positively and significantly affect the productivity of textile industry and textile products. On the other hand, the increase of import penetration will negatively affect the productivity of this industry.

Assessment of uncertainty associated with measuring exposure to radon and decay products in the French uranium miners cohort

International Nuclear Information System (INIS)

Allodji, Rodrigue S; Leuraud, Klervi; Laurier, Dominique; Bernhard, Sylvain; Henry, Stéphane; Bénichou, Jacques

2012-01-01

The reliability of exposure data directly affects the reliability of the risk estimates derived from epidemiological studies. Measurement uncertainty must be known and understood before it can be corrected. The literature on occupational exposure to radon ( 222 Rn) and its decay products reveals only a few epidemiological studies in which uncertainty has been accounted for explicitly. This work examined the sources, nature, distribution and magnitude of uncertainty of the exposure of French uranium miners to radon ( 222 Rn) and its decay products. We estimated the total size of uncertainty for this exposure with the root sum square (RSS) method, which may be an alternative when repeated measures are not available. As a result, we identified six main sources of uncertainty. The total size of the uncertainty decreased from about 47% in the period 1956–1974 to 10% after 1982, illustrating the improvement in the radiological monitoring system over time.

Measuring excess capital capacity in agricultural production

NARCIS (Netherlands)

Zhengfei, G.; Kumbhakar, S.C.; Myers, R.J.; Oude Lansink, A.G.J.M.

2009-01-01

We introduce the concept "excess capital capacity" and employ a stochastic input requirement frontier to measure excess capital capacity in agricultural production. We also propose a two-step estimation method that allows endogenous regressors in stochastic frontier models. The first step uses

Measurement of charmed particle production in hadronic reactions

CERN Multimedia

2002-01-01

The aim of the experiment is to measure the production cross-section for charmed particles in hadronic reactions, study their production mechanism, and search for excited charmed hadrons.\\\\ \\\\ Charmed Mesons and Baryons will be measured in $\\pi$ and $p$ interactions on Beryllium between 100 and 200 GeV/c. The trigger will be on an electron from the leptonic decay of one charmed particle by signals from the Cerenkov counter (Ce), the electron trigger calorimeter (eCal), scintillation counters, and proportional wire chambers. The accompanying charmed particle will be measured via its hadronic decay in a two-stage magnetic spectrometer with drift chambers (arms 2, 3a, 3b, 3c), two large-area multicell Cerenkov counters (C2, C3) and a large-area shower counter ($\\gamma$-CAL). The particles which can be measured and identified include $\\gamma, e, \\pi^{\\pm}, \\pi^{0}, K^{\\pm}, p, \\bar{p}$ so that a large number of hadronic decay modes of charmed particles can be studied. \\\\ \\\\ A silicon counter telescope with 5 $\\m...

Dynamic extrafloral nectar production: the timing of leaf damage affects the defensive response in Senna mexicana var. chapmanii (Fabaceae).

Science.gov (United States)

Jones, Ian M; Koptur, Suzanne

2015-01-01

• Extrafloral nectar (EFN) mediates food for protection mutualisms between plants and defensive insects. Understanding sources of variation in EFN production is important because such variations may affect the number and identity of visitors and the effectiveness of plant defense. We investigated the influence of plant developmental stage, time of day, leaf age, and leaf damage on EFN production in Senna mexicana var. chapmanii. The observed patterns of variation in EFN production were compared with those predicted by optimal defense theory.• Greenhouse experiments with potted plants were conducted to determine how plant age, time of day, and leaf damage affected EFN production. A subsequent field study was conducted to determine how leaf damage, and the resulting increase in EFN production, affected ant visitation in S. chapmanii.• More nectar was produced at night and by older plants. Leaf damage resulted in increased EFN production, and the magnitude of the response was greater in plants damaged in the morning than those damaged at night. Damage to young leaves elicited a stronger defensive response than damage to older leaves, in line with optimal defense theory. Damage to the leaves of S. chapmanii also resulted in significantly higher ant visitation in the field.• Extrafloral nectar is an inducible defense in S. chapmanii. Developmental variations in its production support the growth differentiation balance hypothesis, while within-plant variations and damage responses support optimal defense theory. © 2015 Botanical Society of America, Inc.

Emollient product design: objective measurements of formulation structure, texture and performance, and subjective assessments of user acceptability.

Science.gov (United States)

Antonijević, M D; Owusu-Ware, S; Sanchon-Lopez, B

2018-06-01

The choice of prescribed emollients is usually based on cost and patient preference. Differences in formulations can affect user acceptability. To compare the physical performance, user acceptability and various product design features of two emollient gels that are prescribed in the UK and alleged to be therapeutically interchangeable because their formulations are described as having the same contents of oily ingredients. We found that here are in fact significant measurable differences between the structure and performance of the two formulations, which materially affect their user acceptability. These differences are attributed to the use of different types of gelling agents and other ingredients of differing grades/quality and concentrations, and probably due to the formulations being made by different manufacturing processes. We also identified other product design features that are important to user appeal, including the type of container in which the formulations are presented, the type of dispensing devices provided, and the nature and form of the supplied user instructions. Patients and prescribers should be aware that there can be important differences in performance and user appeal between emollients, even between products that, superficially, may appear to be very similar. These important performance aspects should be characterized for new emollient introductions to encourage better informed product selection. © 2018 The Authors. Clinical and Experimental Dermatology published by John Wiley & Sons Ltd on behalf of British Association of Dermatologists, North American Clinical Dermatologic Society and St Johns Dermatological Society.

Fixing the Problem With Empathy: Development and Validation of the Affective and Cognitive Measure of Empathy.

Science.gov (United States)

Vachon, David D; Lynam, Donald R

2016-04-01

Low empathy is a criterion for most externalizing disorders, and empathy training is a regular component of treatment for aggressive people, from school bullies to sex offenders. However, recent meta-analytic evidence suggests that current measures of empathy explain only 1% of the variance in aggressive behavior. A new assessment of empathy was developed to more fully represent the empathy construct and better predict important outcomes--particularly aggressive behavior and externalizing psychopathology. Across three independent samples (N = 210-708), the 36-item Affective and Cognitive measure of Empathy (ACME) was internally consistent, structurally reliable, and invariant across sex. The ACME bore significant associations to important outcomes, which were incremental relative to other measures of empathy and generalizable across sex. Importantly, the affective scales of the ACME-particularly a new "Affective Dissonance" scale--yielded moderate to strong associations with aggressive behavior and externalizing disorders. The ACME is a short, reliable, and useful measure of empathy. © The Author(s) 2015.

Factors affecting performance and productivity of nurses: professional attitude, organisational justice, organisational culture and mobbing.

Science.gov (United States)

Terzioglu, Fusun; Temel, Safiye; Uslu Sahan, Fatma

2016-09-01

To identify relationships among variables affecting nurses' performance and productivity, namely professional attitudes, organisational culture, organisational justice and exposure to mobbing. The determination of the factors affecting performance and productivity is important for providing efficient nursing services. These factors have been investigated in the literature independently, but the relationship among them has not been clearly identified. This cross-sectional questionnaire study included 772 nurses working in a University Hospital accredited by Joint Commission International. The professional attitude score of the nurses was high (4.35 ± 0.63). However, their organisational justice (2.22 ± 1.26) and organisational culture (2.47 ± 0.71) scores were low. Nurses were subjected to mobbing at a high level (0.82 ± 0.78). As the organisational justice increased, the organisational culture increased and the mobbing decreased. As the organisation culture decreased, the mobbing increased. There was a positive correlation between organisation culture and organisational justice of the nurses and a negative correlation with mobbing. The results of the study are essential for improving nurses' performance and productivity. © 2016 John Wiley & Sons Ltd.

Factors Affecting Labour Productivity in Manufacturing Enterprises

Directory of Open Access Journals (Sweden)

Zbigniew Gołaś

2011-07-01

Full Text Available The article presents the results of the analysis of the factors influencing labour productivity in the manufacturing business sector in 20042008. Labour productivity was analyzed in the context of the assets productivity, technical equipment of work, labour intensity of production, wages, value added and depreciation costs, and using linear stepwise regression. The study shows that despite significant progress, the level of labour productivity in domestic manufacturing significantly lower than the average in the European Union. Lower than in Poland, the level of labour productivity gain only companies in Romania, Bulgaria, Lithuania, Latvia and Estonia. Estimated parameters of the regression function showed that the most important determinants of labour productivity in manufacturing are technical equipment of work, labour intensity of production, assets productivity, level of added value in relation to revenues. These factors explain the variability of labour productivity in 20042008 in a high degree.

Measurements of the Vector boson production with the ATLAS Detector

CERN Document Server

Lapertosa, Alessandro; The ATLAS collaboration

2017-01-01

Measurements of the Drell-Yan production of W and Z/γ bosons at the LHC provide a benchmark of our understanding of perturbative QCD and probe the proton structure in a unique way. The ATLAS collaboration has performed new high precision measurements at center-of-mass energies of 7 TeV. The measurements are performed for W+, W− and Z/γ bosons integrated and as a function of the boson or lepton rapidity and the Z/γ∗ mass. Unprecedented precision is reached and strong constraints on Parton Distribution functions, in particular the strange density are found. Z cross sections are also measured at a center-of-mass energies of 8 TeV and 13 TeV, and cross-section ratios to the top-quark pair production have been derived. This ratio measurement leads to a cancellation of systematic effects and allows for a high precision comparison to the theory predictions. The production of jets in association with vector bosons is a further important process to study perturbative QCD in a multi-scale environment. The ATLAS ...

Measurements of the vector boson production with the ATLAS detector

CERN Document Server

Lapertosa, Alessandro; The ATLAS collaboration

2017-01-01

Measurements of the Drell-Yan production of $W$ and $Z$ bosons at the LHC provide a benchmark of our understanding of perturbative QCD and probe the proton structure in a unique way. The ATLAS collaboration has performed new high precision measurements at center-of-mass energies of 7 TeV. The measurements are performed for $W^+$, $W^{-}$ and $Z$ bosons integrated and as a function of the boson or lepton rapidity and the $Z$ mass. Unprecedented precision is reached and strong constraints on Parton Distribution Functions, in particular the strange density are found. $Z$ boson cross sections are also measured at a center-of-mass energies of 8 TeV and 13 TeV, and cross-section ratios to the top-quark pair production have been derived. This ratio measurement leads to a cancellation of systematic effects and allows for a high precision comparison to the theory predictions. The production of jets in association with vector bosons is a further important process to study perturbative QCD in a multi-scale environment. ...

Does Input Quality Drive Measured Differences in Firm Productivity?

DEFF Research Database (Denmark)

Fox, Jeremy T.; Smeets, Valerie Anne Rolande

2011-01-01

One explanation for productivity dispersion is that the quality of inputs differs across firms. We add labor market history variables such as experience and firm and industry tenure, as well as general human capital measures such as schooling and sex. Adding these variables decreases the ratio...... of the 90th to 10th productivity quantiles from 3.27 to 2.68 across eight Danish manufacturing and service industries. We also use the wage bill and worker fixed effects. We find that the wage bill explains as much dispersion as human capital measures....

The Production Measurement Model of Open Pit Mine Based on Truck Operation Diagram

Directory of Open Access Journals (Sweden)

Sun Xiao-Yu

2016-01-01

Full Text Available Conventional production measurement of truck dispatching system in open pit mine has not been effectively expressed by a mathematical model, which brings a negative effect on the subsequent data mining and a compatibility issue to apply the production measurement with fixed assignment of truck. In this study, based on the proposed concept that truck is not only the carrier of transport material, but also act as the bridges and linkages between the loading sites and the unloading sites, a new truck operation diagram was established, which was further developed to a basic data matrix and a production measurement model. The new model allowed to calculatethe production measurement of the transport, loading, unloading, material and etc, respectively, as well as with any calculation in combination of more than one factor as needed.It solved the compatibility issue between conventional production measurement and the production measurement of fixed assignment of truck with good practical results.

Pig slurry characteristics, nutrient balance and biogas production as affected by separation and acidification

DEFF Research Database (Denmark)

Sommer, S G; Hjorth, Maibritt; Leahy, J J

2015-01-01

and separation fraction applied to fields and crop need. Total biogas production was not affected by separation, whereas acidification reduced biogas production because the process was inhibited by a low pH and a high sulphur concentration. The amount of copper applied per hectare in the liquid manure...... to the wheat field was lower than the amount taken up and more zink and copper was applied in the solid fraction to maize field than taken up. The transportation and field application of solids and liquids did not increase management costs when compared to the transportation of slurry alone, but the investment...

Smith machine counterbalance system affects measures of maximal bench press throw performance.

Science.gov (United States)

Vingren, Jakob L; Buddhadev, Harsh H; Hill, David W

2011-07-01

Equipment with counterbalance weight systems is commonly used for the assessment of performance in explosive resistance exercise movements, but it is not known if such systems affect performance measures. The purpose of this study was to determine the effect of using a counterbalance weight system on measures of smith machine bench press throw performance. Ten men and 14 women (mean ± SD: age, 25 ± 4 years; height, 173 ± 10 cm; weight, 77.7 ± 18.3 kg) completed maximal smith machine bench press throws under 4 different conditions (2 × 2; counterbalance × load): with or without a counterbalance weight system and using 'light' or 'moderate' net barbell loads. Performance variables (peak force, peak velocity, and peak power) were measured using a linear accelerometer attached to the barbell. The counterbalance weight system resulted in significant (p velocity (light: -0.49 ± 0.10 m·s; moderate: -0.33 ± 0.07 m·s), and peak power (light: -220 ± 43 W; moderate: -143 ± 28 W) compared with no counterbalance system for both load conditions. Load condition did not affect absolute or percentage reductions from the counterbalance weight system for any variable. In conclusion, the use of a counterbalance weight system reduces accelerometer-based performance measures for the bench press throw exercise at light and moderate loads. This reduction in measures is likely because of an increase in the external resistance during the movement, which results in a discrepancy between the manually input and the actual value for external load. A counterbalance weight system should not be used when measuring performance in explosive resistance exercises with an accelerometer.

Rare earth elements concentration in mushroom cultivation substrates affects the production process and fruit-bodies content of Pleurotus ostreatus and Cyclocybe cylindracea.

Science.gov (United States)

Koutrotsios, Georgios; Danezis, Georgios P; Georgiou, Constantinos A; Zervakis, Georgios I

2018-04-20

Concentrations of 16 rare earth elements (REEs) and two actinides were determined for the first time both in cultivated mushrooms and in their production substrates by inductively coupled plasma mass spectroscopy. Moreover, the effect of REEs on cultivation parameters and composition of the final product was assessed, together with their potential use for authentication purposes. The concentrations of REEs varied greatly among seven cultivation substrates and correlated with measurements in Cyclocybe cylindracea mushrooms; no such correlation was established in Pleurotus ostreatus. Reduction of hemicellulose, cellulose, and lignin in substrates during P. ostreatus cultivation was positively correlated with REE concentrations, which also affected the production performance depending on the species examined. In all cases, a negative correlation was established between bioconcentration factors (BCF) in mushrooms and REE content in substrates, while the effect of substrate composition on BCF values varied according to the element studied. The estimated daily intake values of REEs through mushroom consumption was at much lower levels than those reported as potentially harmful for human health. The content of REEs in cultivation substrates and in mushrooms revealed that the bioaccumulation of elements differed in each fungus. The nature/origin of substrates seemed to affect the concentration of REEs in mushrooms to a considerable extent. © 2018 Society of Chemical Industry. © 2018 Society of Chemical Industry.

Assessment of global precipitation measurement satellite products over Saudi Arabia

Science.gov (United States)

Mahmoud, Mohammed T.; Al-Zahrani, Muhammad A.; Sharif, Hatim O.

2018-04-01

Most hydrological analysis and modeling studies require reliable and accurate precipitation data for successful simulations. However, precipitation measurements should be more representative of the true precipitation distribution. Many approaches and techniques are used to collect precipitation data. Recently, hydrometeorological and climatological applications of satellite precipitation products have experienced a significant improvement with the emergence of the latest satellite products, namely, the Integrated Multi-satellitE Retrievals for Global Precipitation Measurement (GPM) mission (IMERG) products, which can be utilized to estimate and analyze precipitation data. This study focuses on the validation of the IMERG early, late and final run rainfall products using ground-based rain gauge observations throughout Saudi Arabia for the period from October 2015 to April 2016. The accuracy of each IMERG product is assessed using six statistical performance measures to conduct three main evaluations, namely, regional, event-based and station-based evaluations. The results indicate that the early run product performed well in the middle and eastern parts as well as some of the western parts of the country; meanwhile, the satellite estimates for the other parts fluctuated between an overestimation and an underestimation. The late run product showed an improved accuracy over the southern and western parts; however, over the northern and middle parts, it showed relatively high errors. The final run product revealed significantly improved precipitation estimations and successfully obtained higher accuracies over most parts of the country. This study provides an early assessment of the performance of the GPM satellite products over the Middle East. The study findings can be used as a beneficial reference for the future development of the IMERG algorithms.

Measuring the productivity of university research reactors

International Nuclear Information System (INIS)

Voth, M.H.

1989-01-01

University Research Reactors (URRs) on 33 campuses in the United States provide valuable contributions to academic instruction and research programs. In most cases, there are no alternative diagnostic techniques to supplant the need for a reactor and associated facilities. Since URRs constitute a major financial commitment, it is important that they be operated in a productive manner. Productivity may be defined as the sum of new knowledge generated, existing knowledge transferred to others, and analytical services provided to assist in the generation of new knowledge; another definition of productivity is this sum expressed as a function of the cost incurred. In either case, a consistent measurement is difficult and more qualitative than quantitative. A uniform reporting system has been proposed that defines simplified categories through which meaningful comparisons can be performed

Di-boson production measurements with the ATLAS detector

CERN Document Server

Chevalier, Laurent

2015-01-01

This talk covers the results of the measurements of diboson production cross sections in proton- proton interactions at 7 TeV in 2011 and at 8 TeV in 2012, performed by the ATLAS experiment. The cross sections are measured in phase space regions defined by the decay kinematics, the detector acceptance and then extrapolated to the full phase space. Cross sections for VV (V=W, Z, γ) production in the leptonic or semileptonic channels are compared to (N)NLO predictions of the Standard Model. Kinematic spectra are used to place constraints on anomalous triple-gauge-boson couplings. All cross sections are in agreement with the Standard Model predictions. No experimental evidence is found of anomalous triple-gauge-boson couplings. PACS: 14.70.-e Gauge bosons.

Measurements of photon and jet production properties with ATLAS

CERN Document Server

AUTHOR|(INSPIRE)INSPIRE-00237016; The ATLAS collaboration

2016-09-09

Summary of recent ATLAS measurements of jet and photon production using proton–proton (pp) collisions from the Large Hadron Collider. The charged-particle multiplicity in jets, and jet charge measurements are presented using 8 TeV pp collisions. Differential measurements of jet and photon cross-sections are shown for 7, 8 and 13 TeV pp collisions.

Factors affecting the number and type of student research products for chemistry and physics students at primarily undergraduate institutions: A case study.

Science.gov (United States)

Mellis, Birgit; Soto, Patricia; Bruce, Chrystal D; Lacueva, Graciela; Wilson, Anne M; Jayasekare, Rasitha

2018-01-01

For undergraduate students, involvement in authentic research represents scholarship that is consistent with disciplinary quality standards and provides an integrative learning experience. In conjunction with performing research, the communication of the results via presentations or publications is a measure of the level of scientific engagement. The empirical study presented here uses generalized linear mixed models with hierarchical bootstrapping to examine the factors that impact the means of dissemination of undergraduate research results. Focusing on the research experiences in physics and chemistry of undergraduates at four Primarily Undergraduate Institutions (PUIs) from 2004-2013, statistical analysis indicates that the gender of the student does not impact the number and type of research products. However, in chemistry, the rank of the faculty advisor and the venue of the presentation do impact the number of research products by undergraduate student, whereas in physics, gender match between student and advisor has an effect on the number of undergraduate research products. This study provides a baseline for future studies of discipline-based bibliometrics and factors that affect the number of research products of undergraduate students.

Factors affecting the number and type of student research products for chemistry and physics students at primarily undergraduate institutions: A case study

Science.gov (United States)

Soto, Patricia; Bruce, Chrystal D.; Lacueva, Graciela; Wilson, Anne M.; Jayasekare, Rasitha

2018-01-01

For undergraduate students, involvement in authentic research represents scholarship that is consistent with disciplinary quality standards and provides an integrative learning experience. In conjunction with performing research, the communication of the results via presentations or publications is a measure of the level of scientific engagement. The empirical study presented here uses generalized linear mixed models with hierarchical bootstrapping to examine the factors that impact the means of dissemination of undergraduate research results. Focusing on the research experiences in physics and chemistry of undergraduates at four Primarily Undergraduate Institutions (PUIs) from 2004–2013, statistical analysis indicates that the gender of the student does not impact the number and type of research products. However, in chemistry, the rank of the faculty advisor and the venue of the presentation do impact the number of research products by undergraduate student, whereas in physics, gender match between student and advisor has an effect on the number of undergraduate research products. This study provides a baseline for future studies of discipline-based bibliometrics and factors that affect the number of research products of undergraduate students. PMID:29698502

Consumer preference for chicken breast may be more affected by information on organic production than by product sensory properties.

Science.gov (United States)

Napolitano, F; Castellini, C; Naspetti, S; Piasentier, E; Girolami, A; Braghieri, A

2013-03-01

Conventional chicken from a fast-growing strain (CC), organic chicken from a slow-growing strain (OSG), and organic chicken from a fast-growing strain (OFG) were used to assess descriptive sensory differences between organic and conventional breasts, to verify whether differences were perceived by consumers and to evaluate the effect of information about organic production on liking. A conventional quantitative-descriptive analysis was performed by a trained panel of 10 members on breast slices (1 cm thick) grilled at 300°C. A 150-member consumer panel (from southern, central, and northern Italy) rated CC, OSG, and OFG breasts according to 3 types of evaluation: tasting without information (perceived liking), information without tasting (expected liking), and tasting with information (actual liking). Breasts from different sources were clearly discriminated by the trained panel as meat from CC was perceived more tender than OFG (P consumers for perceived liking. However, consumer expected liking scores were higher for organic than for conventional products (P consumers were not. However, consumer liking was markedly affected by the information given on the organic production system, thus providing a tool to differentiate the product in an increasingly competitive market.

Production Time Loss Reduction in Sauce Production Line by Lean Six Sigma Approach

Science.gov (United States)

Ritprasertsri, Thitima; Chutima, Parames

2017-06-01

In all industries, time losses, which are incurred in processing are very important. As a result, losses are incurred in productivity and cost. This research aimed to reduce lost time that occurs in sauce production line by using the lean six sigma approach. The main objective was to reduce the time for heating sauce which causes a lot of time lost in the production line which affects productivity. The methodology was comprised of the five-phase improvement model of Six Sigma. This approach begins with defining phase, measuring phase, analysing phase, improving phase and controlling phase. Cause-and-effect matrix and failure mode and effect analysis (FMEA) were adopted to screen the factors which affect production time loss. The results showed that the percentage of lost time from heating sauce reduced by 47.76%. This increased productivity to meet the plan.

Productivity Measurement in Manufacturing and the Expenditure Approach

DEFF Research Database (Denmark)

Schjerning, Bertel; Sørensen, Anders

2008-01-01

This paper studies conversion factors based on the expenditure approach and evaluates the appropriateness for international comparisons of output levels in manufacturing. We apply a consistency check based on the insight that relative productivity levels should be invariant to the choice of base....... The conclusion is insensitive to the applied method for developing conversion factors. The implication is that we cannot measure relative productivity levels in manufacturing across countries using the expenditure approach....

Productivity in Pediatric Palliative Care: Measuring and Monitoring an Elusive Metric.

Science.gov (United States)

Kaye, Erica C; Abramson, Zachary R; Snaman, Jennifer M; Friebert, Sarah E; Baker, Justin N

2017-05-01

Workforce productivity is poorly defined in health care. Particularly in the field of pediatric palliative care (PPC), the absence of consensus metrics impedes aggregation and analysis of data to track workforce efficiency and effectiveness. Lack of uniformly measured data also compromises the development of innovative strategies to improve productivity and hinders investigation of the link between productivity and quality of care, which are interrelated but not interchangeable. To review the literature regarding the definition and measurement of productivity in PPC; to identify barriers to productivity within traditional PPC models; and to recommend novel metrics to study productivity as a component of quality care in PPC. PubMed ® and Cochrane Database of Systematic Reviews searches for scholarly literature were performed using key words (pediatric palliative care, palliative care, team, workforce, workflow, productivity, algorithm, quality care, quality improvement, quality metric, inpatient, hospital, consultation, model) for articles published between 2000 and 2016. Organizational searches of Center to Advance Palliative Care, National Hospice and Palliative Care Organization, National Association for Home Care & Hospice, American Academy of Hospice and Palliative Medicine, Hospice and Palliative Nurses Association, National Quality Forum, and National Consensus Project for Quality Palliative Care were also performed. Additional semistructured interviews were conducted with directors from seven prominent PPC programs across the U.S. to review standard operating procedures for PPC team workflow and productivity. Little consensus exists in the PPC field regarding optimal ways to define, measure, and analyze provider and program productivity. Barriers to accurate monitoring of productivity include difficulties with identification, measurement, and interpretation of metrics applicable to an interdisciplinary care paradigm. In the context of inefficiencies

Emotions, affects and the production of social life.

Science.gov (United States)

Fox, Nick J

2015-06-01

While many aspects of social life possess an emotional component, sociology needs to explore explicitly the part emotions play in producing the social world and human history. This paper turns away from individualistic and anthropocentric emphases upon the experience of feelings and emotions, attending instead to an exploration of flows of 'affect' (meaning simply a capacity to affect or be affected) between bodies, things, social institutions and abstractions. It establishes a materialist sociology of affects that acknowledges emotions as a part, but only a part, of a more generalized affective flow that produces bodies and the social world. From this perspective, emotions are not a peculiarly remarkable outcome of the confluence of biology and culture, but part of a continuum of affectivity that links human bodies to their physical and social environment. This enhances sociological understanding of the part emotions play in shaping actions and capacities in many settings of sociological concern. © London School of Economics and Political Science 2015.

Single top-quark production cross section measurements using the ATLAS detector at the LHC

CERN Document Server

Rieck, Patrick; The ATLAS collaboration

2016-01-01

Measurements of single top­quark production in proton proton collisions are presented. The measurements include the first such measurements from the 13 TeV ATLAS dataset. In the leading order process, a W boson is exchanged in the t­channel. The single top­quark and anti­top total production cross sections, their ratio, as well as a measurement of the inclusive production cross section is presented. At 8 TeV, differential cross­section measurements of the t­channel process are also presented, these measurements include limits on anomalous contributions to the Wtb vertex. A measurement of the production cross section of a single top quark in association with a W boson, the second largest single­top production mode, is also presented. Finally, evidence for single­top production in the 8 TeV ATLAS dataset is presented. All measurements are compared to state­of­ the­art theoretical calculations.

Do dose area product meter measurements reflect radiation doses ...

African Journals Online (AJOL)

Enrique

SA JOURNAL OF RADIOLOGY • August 2004. Abstract. This study determined the correlation between radiation doses absorbed by health care workers and dose area product meter (DAP) measurements at Universitas Hospital, Bloemfontein. The DAP is an instrument which accurately measures the radiation emitted from ...

Do dose area product meter measurements reflect radiation doses ...

African Journals Online (AJOL)

This study determined the correlation between radiation doses absorbed by health care workers and dose area product meter (DAP) measurements at Universitas Hospital, Bloemfontein. The DAP is an instrument which accurately measures the radiation emitted from the source. The study included the interventional ...

Encountering Science Education's Capacity to Affect and Be Affected

Science.gov (United States)

Alsop, Steve

2016-01-01

What might science education learn from the recent affective turn in the humanities and social sciences? Framed as a response to Michalinos Zembylas's article, this essay draws from selected theorizing in affect theory, science education and science and technology studies, in pursuit of diverse and productive ways to talk of affect within science…

Mammographic density measurements are not affected by mammography system.

Science.gov (United States)

Damases, Christine N; Brennan, Patrick C; McEntee, Mark F

2015-01-01

Mammographic density (MD) is a significant risk factor for breast cancer and has been shown to reduce the sensitivity of mammography screening. Knowledge of a woman's density can be used to predict her risk of developing breast cancer and personalize her imaging pathway. However, measurement of breast density has proven to be troublesome with wide variations in density recorded using radiologists' visual Breast Imaging Reporting and Data System (BIRADS). Several automated methods for assessing breast density have been proposed, each with their own source of measurement error. The use of differing mammographic imaging systems further complicates MD measurement, especially for the same women imaged over time. The purpose of this study was to investigate whether having a mammogram on differing manufacturer's equipment affects a woman's MD measurement. Raw mammographic images were acquired on two mammography imaging systems (General Electric and Hologic) one year apart and processed using VolparaDensity™ to obtain the Volpara Density Grade (VDG) and average volumetric breast density percentage (AvBD%). Visual BIRADS scores were also obtained from 20 expert readers. BIRADS scores for both systems showed strong positive correlation ([Formula: see text]; [Formula: see text]), while the VDG ([Formula: see text]; [Formula: see text]) and AvBD% ([Formula: see text]; [Formula: see text]) showed stronger positive correlations. Substantial agreement was shown between the systems for BIRADS ([Formula: see text]; [Formula: see text]), however, the systems demonstrated an almost perfect agreement for VDG ([Formula: see text]; [Formula: see text]).

Measurement of inclusive $\\pi^{0}$ production in hadronic $Z^{0}$ decays

CERN Document Server

Adam, W; Agasi, E; Ajinenko, I; Aleksan, Roy; Alekseev, G D; Allport, P P; Almehed, S; Alvsvaag, S J; Amaldi, Ugo; Amato, S; Andreazza, A; Andrieux, M L; Antilogus, P; Apel, W D; Arnoud, Y; Åsman, B; Augustin, J E; Augustinus, A; Baillon, Paul; Bambade, P; Barão, F; Barate, R; Barbiellini, Guido; Bardin, Dimitri Yuri; Barker, G J; Baroncelli, A; Bärring, O; Barrio, J A; Bartl, Walter; Bates, M J; Battaglia, Marco; Baubillier, M; Baudot, J; Becks, K H; Begalli, M; Beillière, P; Belokopytov, Yu A; Belous, K S; Benvenuti, Alberto C; Berggren, M; Bertrand, D; Bianchi, F; Bigi, M; Bilenky, S M; Billoir, P; Bloch, D; Blume, M; Blyth, S; Bocci, V; Bolognese, T; Bonesini, M; Bonivento, W; Booth, P S L; Borisov, G; Bosio, C; Bosworth, S; Botner, O; Bouquet, B; Bourdarios, C; Bowcock, T J V; Bozzo, M; Branchini, P; Brand, K D; Brenke, T; Brenner, R A; Bricman, C; Brillault, L; Brown, R C A; Brückman, P; Brunet, J M; Bugge, L; Buran, T; Burgsmüller, T; Buschmann, P; Buys, A; Caccia, M; Calvi, M; Camacho-Rozas, A J; Camporesi, T; Canale, V; Canepa, M; Cankocak, K; Cao, F; Carena, F; Carrilho, P; Carroll, L; Caso, Carlo; Castillo-Gimenez, M V; Cattai, A; Cavallo, F R; Cerrito, L; Chabaud, V; Charpentier, P; Chaussard, L; Chauveau, J; Checchia, P; Chelkov, G A; Chierici, R; Chliapnikov, P V; Chochula, P; Chorowicz, V; Cindro, V; Collins, P; Contreras, J L; Contri, R; Cortina, E; Cosme, G; Cossutti, F; Crawley, H B; Crennell, D J; Crosetti, G; Cuevas-Maestro, J; Czellar, S; Dahl-Jensen, Erik; Dahm, J; D'Almagne, B; Dam, M; Damgaard, G; Dauncey, P D; Davenport, Martyn; Da Silva, W; Defoix, C; Deghorain, A; Della Ricca, G; Delpierre, P A; Demaria, N; De Angelis, A; De Boeck, H; de Boer, Wim; De Brabandere, S; De Clercq, C; La Vaissière, C de; De Lotto, B; De Min, A; De Paula, L S; De Saint-Jean, C; Dijkstra, H; Di Ciaccio, Lucia; Djama, F; Dolbeau, J; Dönszelmann, M; Doroba, K; Dracos, M; Drees, J; Drees, K A; Dris, M; Dufour, Y; Dupont, F; Edsall, D M; Ehret, R; Eigen, G; Ekelöf, T J C; Ekspong, Gösta; Elsing, M; Engel, J P; Ershaidat, N; Erzen, B; Espirito-Santo, M C; Falk, E; Fassouliotis, D; Feindt, Michael; Ferrer, A; Filippas-Tassos, A; Firestone, A; Fischer, P A; Föth, H; Fokitis, E; Fontanelli, F; Formenti, F; Franek, B J; Frenkiel, P; Fries, D E C; Frodesen, A G; Frühwirth, R; Fulda-Quenzer, F; Fuster, J A; Galloni, A; Gamba, D; Gandelman, M; García, C; García, J; Gaspar, C; Gasparini, U; Gavillet, P; Gazis, E N; Gelé, D; Gerber, J P; Gerdyukov, L N; Gibbs, M; Gokieli, R; Golob, B; Gopal, Gian P; Gorn, L; Górski, M; Guz, Yu; Gracco, Valerio; Graziani, E; Grosdidier, G; Grzelak, K; Gumenyuk, S A; Gunnarsson, P; Günther, M; Guy, J; Hahn, F; Hahn, S; Hajduk, Z; Hallgren, A; Hamacher, K; Hao, W; Harris, F J; Hedberg, V; Henriques, R P; Hernández, J J; Herquet, P; Herr, H; Hessing, T L; Higón, E; Hilke, Hans Jürgen; Hill, T S; Holmgren, S O; Holt, P J; Holthuizen, D J; Hoorelbeke, S; Houlden, M A; Hrubec, Josef; Huet, K; Hultqvist, K; Jackson, J N; Jacobsson, R; Jalocha, P; Janik, R; Jarlskog, G; Jarry, P; Jean-Marie, B; Johansson, E K; Jönsson, L B; Jönsson, P E; Joram, Christian; Juillot, P; Kaiser, M; Kapusta, F; Karafasoulis, K; Karlsson, M; Karvelas, E; Katsanevas, S; Katsoufis, E C; Keränen, R; Khomenko, B A; Khovanskii, N N; King, B J; Kjaer, N J; Klein, H; Klovning, A; Kluit, P M; Köne, B; Kokkinias, P; Koratzinos, M; Kostyukhin, V; Kourkoumelis, C; Kuznetsov, O; Kramer, P H; Krammer, Manfred; Kreuter, C; Królikowski, J; Kronkvist, I J; Krumshtein, Z; Krupinski, W; Kubinec, P; Kucewicz, W; Kurvinen, K L; Lacasta, C; Laktineh, I; Lamblot, S; Lamsa, J; Lanceri, L; Lane, D W; Langefeld, P; Lapin, V; Last, I; Laugier, J P; Lauhakangas, R; Leder, Gerhard; Ledroit, F; Lefébure, V; Legan, C K; Leitner, R; Lemoigne, Y; Lemonne, J; Lenzen, Georg; Lepeltier, V; Lesiak, T; Liko, D; Lindner, R; Lipniacka, A; Lippi, I; Lörstad, B; Lokajícek, M; Loken, J G; López, J M; López-Fernandez, A; López-Aguera, M A; Loukas, D; Lutz, P; Lyons, L; MacNaughton, J N; Maehlum, G; Maio, A; Malychev, V; Mandl, F; Maocun, C; Marco, J; Maréchal, B; Margoni, M; Marin, J C; Mariotti, C; Markou, A; Maron, T; Martínez-Rivero, C; Martínez-Vidal, F; Martí i García, S; Matorras, F; Matteuzzi, C; Matthiae, Giorgio; Mazzucato, M; McCubbin, M L; McKay, R; McNulty, R; Medbo, J; Meroni, C; Meyer, S; Meyer, W T; Michelotto, M; Migliore, E; Mirabito, L; Mitaroff, Winfried A; Mjörnmark, U; Moa, T; Møller, R; Mönig, K; Monge, M R; Morettini, P; Müller, H; Mundim, L M; Murray, W J; Muryn, B; Myatt, Gerald; Naraghi, F; Navarria, Francesco Luigi; Navas, S; Negri, P; Némécek, S; Neumann, W; Neumeister, N; Nicolaidou, R; Nielsen, B S; Nieuwenhuizen, M; Nikolaenko, V; Niss, P; Nomerotski, A; Normand, Ainsley; Oberschulte-Beckmann, W; Obraztsov, V F; Olshevskii, A G; Onofre, A; Orava, Risto; Österberg, K; Ouraou, A; Paganini, P; Paganoni, M; Pagès, P; Palka, H; Papadopoulou, T D; Papageorgiou, K; Pape, L; Parkes, C; Parodi, F; Passeri, A; Pegoraro, M; Peralta, L; Pernicka, Manfred; Perrotta, A; Petridou, C; Petrolini, A; Petrovykh, M; Phillips, H T; Piana, G; Pierre, F; Pimenta, M; Pindo, M; Plaszczynski, S; Podobrin, O; Pol, M E; Polok, G; Poropat, P; Pozdnyakov, V; Prest, M; Privitera, P; Pukhaeva, N; Radojicic, D; Ragazzi, S; Rahmani, H; Rames, J; Ratoff, P N; Read, A L; Reale, M; Rebecchi, P; Redaelli, N G; Regler, Meinhard; Reid, D; Renton, P B; Resvanis, L K; Richard, F; Richardson, J; Rídky, J; Rinaudo, G; Ripp, I; Romero, A; Roncagliolo, I; Ronchese, P; Roos, L; Rosenberg, E I; Rosso, E; Roudeau, Patrick; Rovelli, T; Rückstuhl, W; Ruhlmann-Kleider, V; Ruiz, A; Rybicki, K; Saarikko, H; Sacquin, Yu; Sadovskii, A; Sajot, G; Salt, J; Sánchez, J; Sannino, M; Schimmelpfennig, M; Schneider, H; Schwickerath, U; Schyns, M A E; Sciolla, G; Scuri, F; Seager, P; Sedykh, Yu; Segar, A M; Seitz, A; Sekulin, R L; Shellard, R C; Siccama, I; Siegrist, P; Simonetti, S; Simonetto, F; Sissakian, A N; Sitár, B; Skaali, T B; Smadja, G; Smirnov, N; Smirnova, O G; Smith, G R; Sosnowski, R; Souza-Santos, D; Spassoff, Tz; Spiriti, E; Sponholz, P; Squarcia, S; Stanescu, C; Stapnes, Steinar; Stavitski, I; Stichelbaut, F; Stocchi, A; Strauss, J; Strub, R; Stugu, B; Szczekowski, M; Szeptycka, M; Tabarelli de Fatis, T; Tavernet, J P; Chikilev, O G; Tilquin, A; Timmermans, J; Tkatchev, L G; Todorov, T; Toet, D Z; Tomaradze, A G; Tomé, B; Tortora, L; Tranströmer, G; Treille, D; Trischuk, W; Tristram, G; Trombini, A; Troncon, C; Tsirou, A L; Turluer, M L; Tyapkin, I A; Tyndel, M; Tzamarias, S; Überschär, B; Ullaland, O; Uvarov, V; Valenti, G; Vallazza, E; Van der Velde, C; van Apeldoorn, G W; van Dam, P; Van Doninck, W K; Van Eldik, J; Vassilopoulos, N; Vegni, G; Ventura, L; Venus, W A; Verbeure, F; Verlato, M; Vertogradov, L S; Vilanova, D; Vincent, P; Vitale, L; Vlasov, E; Vodopyanov, A S; Vrba, V; Wahlen, H; Walck, C; Weierstall, M; Weilhammer, Peter; Weiser, C; Wetherell, Alan M; Wicke, D; Wickens, J H; Wielers, M; Wilkinson, G R; Williams, W S C; Winter, M; Witek, M; Woschnagg, K; Yip, K; Yushchenko, O P; Zach, F; Zacharatou-Jarlskog, C; Zaitsev, A; Zalewska-Bak, A; Zalewski, Piotr; Zavrtanik, D; Zevgolatakos, E; Zimin, N I; Zito, M; Zontar, D; Zuberi, R; Zucchelli, G C; Zumerle, G

1996-01-01

An analysis is presented of inclusive \\pi^0 production in Z^0 decays measured with the DELPHI detector. At low energies, \\pi^0 decays are reconstructed by \\linebreak using pairs of converted photons and combinations of converted photons and photons reconstructed in the barrel electromagnetic calorimeter (HPC). At high energies (up to x_p = 2 \\cdot p_{\\pi}/\\sqrt{s} = 0.75) the excellent granularity of the HPC is exploited to search for two-photon substructures in single showers. The inclusive differential cross section is measured as a function of energy for {q\\overline q} and {b \\bar b} events. The number of \\pi^0's per hadronic Z^0 event is N(\\pi^0)/ Z_{had}^0 = 9.2 \\pm 0.2 \\mbox{(stat)} \\pm 1.0 \\mbox{(syst)} and for {b \\bar b}~events the number of \\pi^0's is {\\mathrm N(\\pi^0)/ b \\overline b} = 10.1 \\pm 0.4 \\mbox{(stat)} \\pm 1.1 \\mbox{(syst)} . The ratio of the number of \\pi^0's in b \\overline b events to hadronic Z^0 events is less affected by the systematic errors and is found to be 1.09 \\pm 0.05 \\pm 0.01....

A computer controlled ultrasonic measurement and testequipment for rotation-symmetrical products

International Nuclear Information System (INIS)

Abend, K.; Lang, R.; Schmidt, U.; Schuett, U.; Sterberg, W.

1976-01-01

During production of rotation-symmetrical thin wall precision tubes, dimensions must be measured and the tubes have to be inspected for surface defects. Within the production area of the tubes, several measurement points for different applications are located at different places. The paper describes their on-line connection to a process-computer system

How lingering representations of abandoned context words affect speech production.

Science.gov (United States)

Tydgat, Ilse; Diependaele, Kevin; Hartsuiker, Robert J; Pickering, Martin J

2012-07-01

Four experiments tested whether and how initially planned but then abandoned speech can influence the production of a subsequent resumption. Participants named initial pictures, which were sometimes suddenly replaced by target pictures that were related in meaning or word form or were unrelated. They then had to stop and resume with the name of the target picture. Target picture naming latencies were measured separately for trials in which the initial speech was skipped, interrupted, or completed. Semantically related initial pictures helped the production of the target word, although the effect dissipated once the utterance of the initial picture name had been completed. In contrast, phonologically related initial pictures hindered the production of the target word, but only for trials in which the name of the initial picture had at least partly been uttered. This semantic facilitation and phonological interference did not depend on the time interval between the initial and target picture, which was either varied between 200 ms and 400 ms (Experiments 1-2) or was kept constant at 300 ms (Experiments 3-4). We discuss the implications of these results for models of speech self-monitoring and for models of problem-free word production. Copyright © 2012 Elsevier B.V. All rights reserved.

Measurement framework for product service system performance of generator set distributors

Science.gov (United States)

Sofianti, Tanika D.

2017-11-01

Selling Generator Set (Genset) in B2B market, distributors assisted manufacturers to sell products. This is caused by the limited resources owned by the manufacturer for adding service elements. These service elements are needed to enhance the competitiveness of the generator sets. Some genset distributors often sell products together with supports to their customers. Industrial distributor develops services to meet the needs of the customer. Generator set distributors support machines and equipment produced by manufacturer. The services delivered by the distributors could enhance value obtained by the customers from the equipment. Services provided to customers in bidding process, ordering process of the equipment from the manufacturer, equipment delivery, installations, and the after sales stage. This paper promotes framework to measure Product Service System (PSS) of Generator Set distributors in delivering their products and services for the customers. The methodology of conducting this research is by adopting the perspective of the providers and customers and by taking into account the tangible and intangible products. This research leads to the idea of improvement of current Product Service System of a Genset distributor. This research needs further studies in more detailed measures and the implementation of measurement tools.

Wider stall space affects behavior, lesion scores, and productivity of gestating sows.

Science.gov (United States)

Salak-Johnson, J L; DeDecker, A E; Levitin, H A; McGarry, B M

2015-10-01

Limited space allowance within the standard gestation stall is an important welfare concern because it restricts the ability of the sow to make postural adjustments and hinders her ability to perform natural behaviors. Therefore, we evaluated the impacts of increasing stall space and/or providing sows the freedom to access a small pen area on sow well-being using multiple welfare metrics. A total of 96 primi- and multiparous crossbred sows were randomly assigned in groups of 4 sows/treatment across 8 replicates to 1 of 3 stall treatments (TRT): standard stall (CTL; dimensions: 61 by 216 cm), width-adjustable stall (flex stall [FLX]; dimensions: adjustable width of 56 to 79 cm by 216 cm), or an individual walk-in/lock-in stall with access to a small communal open-pen area at the rear of the stall (free-access stall [FAS]; dimensions: 69 by 226 cm). Lesion scores, behavior, and immune and productivity traits were measured at various gestational days throughout the study. Total lesion scores were greatest for sows in FAS and least for sows in FLX ( pregnancy progressed, lesion scores increased among sows in CTL ( postural behaviors and sham chew behavior were affected by TRT ( changes in postural behaviors, lesion severity scores, and other sow traits. Moreover, compromised welfare measures found among sows in various stall environments may be partly attributed to the specific constraints of each stall system such as restricted stall space in CTL, insufficient floor space in the open-pen area of the FAS system, and gate design of the FLX (e.g., direction of bars and feeder space). These results also indicate that parity and gestational day are additional factors that may exacerbate the effects of restricted stall space or insufficient pen space, further compromising sow well-being.

Light Conditions Affect the Measurement of Oceanic Bacterial Production via Leucine Uptake

Science.gov (United States)

Morán, Xosé Anxelu G.; Massana, Ramon; Gasol, Josep M.

2001-01-01

The effect of irradiance in the range of 400 to 700 nm or photosynthetically active radiation (PAR) on bacterial heterotrophic production estimated by the incorporation of 3H-leucine (referred to herein as Leu) was investigated in the northwestern Mediterranean Sea and in a coastal North Atlantic site, with Leu uptake rates ranging over 3 orders of magnitude. We performed in situ incubations under natural irradiance levels of Mediterranean samples taken from five depths around solar noon and compared them to incubations in the dark. In two of the three stations large differences were found between light and dark uptake rates for the surfacemost samples, with dark values being on average 133 and 109% higher than in situ ones. Data obtained in coastal North Atlantic waters confirmed that dark enclosure may increase Leu uptake rates more than threefold. To explain these differences, on-board experiments of Leu uptake versus irradiance were performed with Mediterranean samples from depths of 5 and 40 m. Incubations under a gradient of 12 to 1,731 μmol of photons m−2 s−1 evidenced a significant increase in incorporation rates with increasing PAR in most of the experiments, with dark-incubated samples departing from this pattern. These results were not attributed to inhibition of Leu uptake in the light but to enhanced bacterial response when transferred to dark conditions. The ratio of dark to light uptake rates increased as dissolved inorganic nitrogen concentrations decreased, suggesting that bacterial nutrient deficiency was overcome by some process occurring only in the dark bottles. PMID:11525969

Measuring a Country's Product Ladder and Technology Level based on Trade Flow

Directory of Open Access Journals (Sweden)

Jong-il Kim

2006-06-01

Full Text Available This study tries to quantify the technology level of products based on the concept of product ladder. While many studies on country technology competitiveness use the aggregate indices such as total factor productivity and revealed comparative advantage, this study estimates the ranking of about 2000 products in product ladder by using SITC 5 digit level export data. Based on the product ladder, this study measures the country and industry ranking and explores the characteristics of the ranking. It provides the international comparison of inter-industry and intra-industry ranking differences in product ladder. The statistical relationships between the ranking in product ladder and the determinants of technology level such as R&D and physical capital investment and wage, confirms that the measured ranking in product ladder could be regarded as an indirect indicator of technology level. The product ladder is applied to the estimation of production function to see the effect of the product differentiation on labor productivity.

Continuous glucose monitoring in newborn infants: how do errors in calibration measurements affect detected hypoglycemia?

OpenAIRE

Thomas, Felicity Louise; Signal, Mathew; Harris, Deborah L.; Weston, Philip J.; Harding, Jane E.; Shaw, Geoffrey M.; Chase, J. Geoffrey

2014-01-01

Neonatal hypoglycemia is common and can cause serious brain injury. Continuous glucose monitoring (CGM) could improve hypoglycemia detection, while reducing blood glucose (BG) measurements. Calibration algorithms use BG measurements to convert sensor signals into CGM data. Thus, inaccuracies in calibration BG measurements directly affect CGM values and any metrics calculated from them. The aim was to quantify the effect of timing delays and calibration BG measurement errors on hypoglycemia me...

A systematic review of measures of HIV/AIDS stigma in paediatric HIV-infected and HIV-affected populations

Science.gov (United States)

McAteer, Carole Ian; Truong, Nhan-Ai Thi; Aluoch, Josephine; Deathe, Andrew Roland; Nyandiko, Winstone M; Marete, Irene; Vreeman, Rachel Christine

2016-01-01

Introduction HIV-related stigma impacts the quality of life and care management of HIV-infected and HIV-affected individuals, but how we measure stigma and its impact on children and adolescents has less often been described. Methods We conducted a systematic review of studies that measured HIV-related stigma with a quantitative tool in paediatric HIV-infected and HIV-affected populations. Results and discussion Varying measures have been used to assess stigma in paediatric populations, with most studies utilizing the full or variant form of the HIV Stigma Scale that has been validated in adult populations and utilized with paediatric populations in Africa, Asia and the United States. Other common measures included the Perceived Public Stigma Against Children Affected by HIV, primarily utilized and validated in China. Few studies implored item validation techniques with the population of interest, although scales were used in a different cultural context from the origin of the scale. Conclusions Many stigma measures have been used to assess HIV stigma in paediatric populations, globally, but few have implored methods for cultural adaptation and content validity. PMID:27717409

Factors affecting water balance and percolate production for a landfill in operation.

Science.gov (United States)

Poulsen, Tjalfe G; Møoldrup, Per

2005-02-01

Percolate production and precipitation data for a full-scale landfill in operation measured over a 13-year period were used to evaluate the impact and importance of the hydrological conditions of landfill sections on the percolate production rates. Both active (open) and closed landfill sections were included in the evaluation. A simple top cover model requiring a minimum of input data was used to simulate the percolate production as a function of precipitation and landfill section hydrology. The results showed that changes over time in the hydrology of individual landfill sections (such as section closure or plantation of trees on top of closed sections) can change total landfill percolate production by more than 100%; thus, percolate production at an active landfill can be very different from percolate production at the same landfill after closure. Furthermore, plantation of willow on top of closed sections can increase the evapotranspiration rate thereby reducing percolate production rates by up to 47% compared to a grass cover. This process, however, depends upon the availability of water in the top layer, and so the evaporation rate will be less than optimal during the summer where soil-water contents in the top cover are low.

Hospitals Productivity Measurement Using Data Envelopment Analysis Technique.

Science.gov (United States)

Torabipour, Amin; Najarzadeh, Maryam; Arab, Mohammad; Farzianpour, Freshteh; Ghasemzadeh, Roya

2014-11-01

This study aimed to measure the hospital productivity using data envelopment analysis (DEA) technique and Malmquist indices. This is a cross sectional study in which the panel data were used in a 4 year period from 2007 to 2010. The research was implemented in 12 teaching and non-teaching hospitals of Ahvaz County. Data envelopment analysis technique and the Malmquist indices with an input-orientation approach, was used to analyze the data and estimation of productivity. Data were analyzed using the SPSS.18 and DEAP.2 software. Six hospitals (50%) had a value lower than 1, which represents an increase in total productivity and other hospitals were non-productive. the average of total productivity factor (TPF) was 1.024 for all hospitals, which represents a decrease in efficiency by 2.4% from 2007 to 2010. The average technical, technologic, scale and managerial efficiency change was 0.989, 1.008, 1.028, and 0.996 respectively. There was not a significant difference in mean productivity changes among teaching and non-teaching hospitals (P>0.05) (except in 2009 years). Productivity rate of hospitals had an increasing trend generally. However, the total average of productivity was decreased in hospitals. Besides, between the several components of total productivity, variation of technological efficiency had the highest impact on reduce of total average of productivity.

Measuring efficiency of cotton cultivation in Pakistan: a restricted production frontier study.

Science.gov (United States)

Watto, Muhammad Arif; Mugera, Amin

2014-11-01

Massive groundwater pumping for irrigation has started lowering water tables rapidly in different regions of Pakistan. Declining water tables have thus prompted research efforts to improve agricultural productivity and efficiency to make efficient use of scarce water resources. This study employs a restricted stochastic production frontier to estimate the level of, and factors affecting, technical efficiency of groundwater-irrigated cotton farms in the Punjab province of Pakistan. The mean technical efficiency estimates indicate substantial technical inefficiencies among cotton growers. On average, tube-well owners and water buyers can potentially increase cotton production by 19% and 28%, respectively, without increasing the existing input level. The most influential factors affecting technical efficiency positively are the use of improved quality seed, consultation with extension field staff and farmers' perceptions concerning the availability of groundwater resources for irrigation in the future. This study proposes that adopting improved seed for new cotton varieties and providing better extension services regarding cotton production technology would help to achieve higher efficiency in cotton farming. Within the context of falling water tables, educating farmers about the actual crop water requirements and guiding them about groundwater resource availability may also help to achieve higher efficiencies. © 2014 Society of Chemical Industry. © 2014 Society of Chemical Industry.

Measurements of Drell-Yan and vector boson plus jet productions in ATLAS

CERN Document Server

Donadelli, Marisilvia; The ATLAS collaboration

2015-01-01

The inclusive production of W and Z bosons as well the off-shell Z/gamma* production at hadron colliders provide a benchmark of our understanding of quantum chromodynamic (QCD) and electroweak (EW) processes. The measurement of their production cross-sections can be compared to theory calculations at NNLO QCD and have an impact on our knowledge of the parton densities of the proton. The production of heavy flavour in association with a W or Z boson represent important backgrounds to Higgs and BSM studies and are challenging to calculate in QCD. During the LHC Run 1, several precision measurements were performed by the ATLAS experiment using pp data at 7 TeV of integrated as well as differential cross sections. Comparisons are made to a diverse set of state-­of­the­-art NLO QCD calculations, some of which are interfaced to MC generators for parton showering and hadronization. Z+bb production probes the b­-quark production by high-­order QCD processes. Measurement of W+c production cross section has a uniq...

Profit and Risk Measures in Oil Production Optimization

DEFF Research Database (Denmark)

Capolei, Andrea; Foss, Bjarne; Jørgensen, John Bagterp

2015-01-01

In oil production optimization, we usually aim to maximize a deterministic scalar performance index such as the profit over the expected reservoir lifespan. However, when uncertainty in the parameters is considered, the profit results in a random variable that can assume a range of values dependi...... pro and cons for each of them. Finally, among the presented risk measures, we identify two of them as appropriate risk measures when minimizing the risk....

Measuring production loss due to health and work environment problems: construct validity and implications.

Science.gov (United States)

Karlsson, Malin Lohela; Bergström, Gunnar; Björklund, Christina; Hagberg, Jan; Jensen, Irene

2013-12-01

The aim was to validate two measures of production loss, health-related and work environment-related production loss, concerning their associations with health status and work environment factors. Validity was assessed by evaluating the construct validity. Health problems related and work environment-related problems (or factors) were included in separate analyses and evaluated regarding the significant difference in proportion of explained variation (R) of production loss. health problems production loss was not found to fulfill the criteria for convergent validity in this study; however, the measure of work environment-related production loss did fulfill the criteria that were set up. The measure of work environment-related production loss can be used to screen for production loss due to work environment problems as well as an outcome measure when evaluating the effect of organizational interventions.

Single Top quark production cross-section measurements using the ATLAS detector at the LHC

CERN Document Server

Jimenez Pena, Javier; The ATLAS collaboration

2018-01-01

Measurements of single top-quark production in proton-proton collisions are presented based on the 13 TeV and 8 TeV ATLAS datasets. In the leading order process, a W-boson is exchanged in the t-channel. The cross-section for the production of single top-quarks and single antitop-quarks, their ratio, as well as differential cross-section measurements are also reported. Measurements of the inclusive and differential cross-sections for the production of a single top quark in association with a W-boson, the second largest single top production mode are also presented. Evidence for the s-channel single top-quark production in the 8 TeV dataset is presented. Finally, the first measurement of the tZq electroweak production is presented. All measurements are compared to state-of-the art theoretical calculations. (On behalf of the ATLAS collaboration)

Measurements of the Vector boson production with the ATLAS Detector

CERN Document Server

Weber, Stephen Albert; The ATLAS collaboration

2018-01-01

Measurements of the Drell-Yan production of W and Z bosons at the LHC are an essential part of the ATLAS standard model physics program. These processes are a probe to understand perturbative QCD and the structure of the proton. Differential measurements of the Z boson cross section produced in association with jets can be compared to different LO and NLO MC generators to test the accuracy of these predictions. A selection of recent results are presented on varying studies of W and Z boson production.

Biodiesel production from microalgae: cultivation parameters that affect lipid production

International Nuclear Information System (INIS)

Arias Penaranda, Martha Trinidad; Martinez Roldan, Alfredo de Jesus; Canizares Villanueva, Rosa Olivia

2013-01-01

The microalgae have the capacity to mitigate CO 2 emissions and to produce lipids, which are considered with potential to obtain third-generation biofuel. This review provides updated information of the influence of culture conditions on the lipids production with high productivity and profile suitable for the biodiesel production. This document presents a compilation of research conclusions over the last 13 years around the world. in the literature consulted, the authors conclude that although the behavior of microalgae at physiological stress conditions, varies between species; the nutrients limitation, especially nitrogen and phosphorus, associated with heterotrophic growth or high irradiances in phototrophy are considered the most efficient strategies to increase the lipid content in microalgae, particularly triglycerides (consisting of saturated and monounsaturated fatty acids), which are excellent for the production of biodiesel. Also, it is reported that the lipid content increase and the number of unsaturated fatty acids decrease with the addition of small amounts of CO 2 and harvesting the biomass it the stationary phase of growth.

Hydrogen peroxide production is affected by oxygen levels in mammalian cell culture.

Science.gov (United States)

Maddalena, Lucas A; Selim, Shehab M; Fonseca, Joao; Messner, Holt; McGowan, Shannon; Stuart, Jeffrey A

2017-11-04

Although oxygen levels in the extracellular space of most mammalian tissues are just a few percent, under standard cell culture conditions they are not regulated and are often substantially higher. Some cellular sources of reactive oxygen species, like NADPH oxidase 4, are sensitive to oxygen levels in the range between 'normal' physiological (typically 1-5%) and standard cell culture (up to 18%). Hydrogen peroxide in particular participates in signal transduction pathways via protein redox modifications, so the potential increase in its production under standard cell culture conditions is important to understand. We measured the rates of cellular hydrogen peroxide production in some common cell lines, including C2C12, PC-3, HeLa, SH-SY5Y, MCF-7, and mouse embryonic fibroblasts (MEFs) maintained at 18% or 5% oxygen. In all instances the rate of hydrogen peroxide production by these cells was significantly greater at 18% oxygen than at 5%. The increase in hydrogen peroxide production at higher oxygen levels was either abolished or substantially reduced by treatment with GKT 137831, a selective inhibitor of NADPH oxidase subunits 1 and 4. These data indicate that oxygen levels experienced by cells in culture influence hydrogen peroxide production via NADPH oxidase 1/4, highlighting the importance of regulating oxygen levels in culture near physiological values. However, we measured pericellular oxygen levels adjacent to cell monolayers under a variety of conditions and with different cell lines and found that, particularly when growing at 5% incubator oxygen levels, pericellular oxygen was often lower and variable. Together, these observations indicate the importance, and difficulty, of regulating oxygen levels experienced by cells in culture. Copyright © 2017 Elsevier Inc. All rights reserved.

Climate change induced rainfall patterns affect wheat productivity and agroecosystem functioning dependent on soil types

Science.gov (United States)

Tabi Tataw, James; Baier, Fabian; Krottenthaler, Florian; Pachler, Bernadette; Schwaiger, Elisabeth; Whylidal, Stefan; Formayer, Herbert; Hösch, Johannes; Baumgarten, Andreas; Zaller, Johann G.

2014-05-01

Wheat is a crop of global importance supplying more than half of the world's population with carbohydrates. We examined, whether climate change induced rainfall patterns towards less frequent but heavier events alter wheat agroecosystem productivity and functioning under three different soil types. Therefore, in a full-factorial experiment Triticum aestivum L. was cultivated in 3 m2 lysimeter plots containing the soil types sandy calcaric phaeozem, gleyic phaeozem or calcic chernozem. Prognosticated rainfall patterns based on regionalised climate change model calculations were compared with current long-term rainfall patterns; each treatment combination was replicated three times. Future rainfall patterns significantly reduced wheat growth and yield, reduced the leaf area index, accelerated crop development, reduced arbuscular mycorrhizal fungi colonisation of roots, increased weed density and the stable carbon isotope signature (δ13C) of both old and young wheat leaves. Different soil types affected wheat growth and yield, ecosystem root production as well as weed abundance and biomass. The interaction between climate and soil type was significant only for the harvest index. Our results suggest that even slight changes in rainfall patterns can significantly affect the functioning of wheat agroecosystems. These rainfall effects seemed to be little influenced by soil types suggesting more general impacts of climate change across different soil types. Wheat production under future conditions will likely become more challenging as further concurrent climate change factors become prevalent.

LEP measurements on production, mass, lifetime of beauty particles

International Nuclear Information System (INIS)

Wormser, G.

1993-10-01

Present knowledge about the individual properties of the different beauty particles is discussed using the results of the LEP experiments. Individual lifetimes for B d 0 and B + are found to be equal within 10% whilst a 15% precision is reached for B s 0 and Λ b . The Λ b lifetime is found to be smaller than τ B + with a 2.7 σ significance. The production rate of each of these particles is measured at the 20% level. Preliminary evidence for Ξ b production has been reported. Finally, the B s 0 meson mass has been measured to be 5373 ± 4 MeV/c 2 . (author) 24 refs., 9 figs., 5 tabs

Factors affecting the corrosion of SiC layer by fission product palladium

International Nuclear Information System (INIS)

Dewita, E.

2000-01-01

HTR is one of the advanced nuclear reactors which has inherent safety system, graphite moderated and helium gas cooled. In general, these reactors are designed with the TRISO coated particle consist of four coating layers that are porous pyrolytic carbon (PyC). inner dense PyC (IPyC), silicon carbide (SiC), and outer dense PyC (OPyC). Among the four coating layers, the SiC plays an important role beside in retaining metallic fission products, it also provides mechanical strength to fuel particle. However, results of post irradiation examination indicate that fission product palladium can react with and corrode SiC layer, This assessment is conducted to get the comprehension about resistance of SiC layer on irradiation effects, especially in order to increase the fuel bum-up. The result of this shows that the corrosion of SiC layer by fission product palladium is beside depend on the material characteristics of SiC, and also there are other factors that affect on the SiC layer corrosion. Fuel enrichment, bum-up, and irradiation time effect on the palladium flux in fuel kernel. While, the fuel density, vapour pressure of palladium (the degree depend on the irradiation temperature and kernel composition) effect on palladium migration in fuel particle. (author)

Exploring the cognitive and affective bases of online purchase intentions : a hierarchical test across product types

NARCIS (Netherlands)

Verhagen, Tibert; Bloemers, Daniel

2017-01-01

Whereas there is ample e-commerce research on how online store beliefs and consumer online affective states may influence online purchase intentions, no research so far has examined whether the hierarchy of effects between these concepts differs across product types. In this study, we fill this

How Planting Density Affects Number and Yield of Potato Minitubers in a Commercial Glasshouse Production System

NARCIS (Netherlands)

Veeken, van der A.J.H.; Lommen, W.J.M.

2009-01-01

Commercial potato minituber production systems aim at high tuber numbers per plant. This study investigated by which mechanisms planting density (25.0, 62.5 and 145.8 plants/m2) of in vitro derived plantlets affected minituber yield and minituber number per plantlet. Lowering planting density

Measurements of the vector boson production with the ATLAS detector

Science.gov (United States)

Lapertosa, A.

2018-01-01

Measurements of the Drell-Yan production of W and Z bosons at the LHC provide a benchmark of our understanding of perturbative QCD and probe the proton structure in a unique way. The ATLAS collaboration has performed new high precision measurements at a center-of-mass energy of 7 TeV. The measurements are performed for W+, W- and Z bosons integrated and as a function of the boson or lepton rapidity and the Z mass. Unprecedented precision is reached and strong constraints on Parton Distribution Functions, in particular the strange density are found. Z boson cross sections are also measured at center-of-mass energies of 8 TeV and 13 TeV, and cross-section ratios to the top-quark pair production have been derived. This ratio measurement leads to a cancellation of systematic effects and allows for a high precision comparison to the theory predictions. The production of jets in association with vector bosons is a further important process to study perturbative QCD in a multi-scale environment. The ATLAS collaboration has performed new measurements of Z boson plus jets cross sections, differential in several kinematic variables, in proton-proton collision data taken at a center-of-mass energy of 13 TeV. The measurements are compared to state-of-the art theory predictions. They are sensitive to higher-order pQCD effects, probe flavour and mass schemes and can be used to constrain the proton structure. In addition, a new measurement of the splitting scales of the kt jet-clustering algorithm for final states containing a Z boson candidate at a center-of-mass energy of 8 TeV is presented.

On-line tritium production and heat deposition rate measurements at the Lotus facility

International Nuclear Information System (INIS)

Joneja, O.P.; Scherrer, P.; Anand, R.P.

1994-01-01

Integral tritium production and heat deposition measurement in a prototype fusion blanket would enable verification of the computational codes and the data based employed for the calculations. A large number of tritium production rate measurements have been reported for different type of blankets, whereas the direct heat deposition due to the mixed radiation field in the fusion environment, is still in its infancy. In order to ascertain the kerma factors and the photon production libraries, suitable techniques must be developed to directly measure the nuclear heat deposition rates in the materials required for the fusion systems. In this context, at the Lotus facility, we have developed an extremely efficient double ionizing chamber, for the on-line tritium production measurements and employed a pure graphite calorimeter to measure the nuclear heat deposition due to the mixed radiation field of the 14 MeV, Haefely neutron generator. This paper presents both systems and some of the recent measurements. (authors). 8 refs., 13 figs

Latest LHCb measurements of Electroweak Boson Production in Run-1

CERN Document Server

CERN. Geneva

2015-01-01

We present the latest LHCb measurements of forward Electroweak Boson Production using proton-proton collisions recorded in LHC Run-1. The seminar shall discuss measurements of the 8 TeV W & Z boson production cross-sections. These results make use of LHCb's excellent integrated luminosity determination to provide constraints on the parton distribution functions which describe the inner structure of the proton. These LHCb measurements probe a region of phase space at low Bjorken-x where the other LHC experiments have limited sensitivity. We also present measurements of cross-section ratios, and ratios of results in 7 TeV and 8 TeV proton-proton collisions. These results provide precision tests of the Standard Model. The seminar shall also present a measurement of the forward-backward asymmetry (A_FB) in Z boson decays to two muons. This result allows for precision tests of the coupling of the Z boson to left and right handed particles, providing sensitivity to the effective weak mixing angle (...

Measurement of W/Z production with the ATLAS detector

CERN Document Server

Sauvan, JB; The ATLAS collaboration

2012-01-01

The production of W and Z bosons at the LHC has been measured with the ATLAS detector. These measurements include inclusive and differential cross sections, $W$ polarisation, and the polarisation of tau leptons from W decays. They show sensitivity to the proton structure and are also used to test predictions from perturbative QCD and phenomenological models.

Method s for Measuring Productivity in Libraries and Information Centres

OpenAIRE

Mohammad Alaaei

2009-01-01

  Within Information centers, productivity is the result of optimal and effective use of information resources, service quality improvement, increased user satisfaction, pleasantness of working environment, increased motivation and enthusiasm of staff to work better. All contribute to the growth and development of information centers. Thus these centers would need to be familiar with methods employed in productivity measurement. Productivity is one of the criteria for evaluating system perfor...

TNFα altered inflammatory responses, impaired health and productivity, but did not affect glucose or lipid metabolism in early-lactation dairy cows.

Directory of Open Access Journals (Sweden)

Kai Yuan

Full Text Available Inflammation may be a major contributing factor to peripartum metabolic disorders in dairy cattle. We tested whether administering an inflammatory cytokine, recombinant bovine tumor necrosis factor-α (rbTNFα, affects milk production, metabolism, and health during this period. Thirty-three Holstein cows (9 primiparous and 24 multiparous were randomly assigned to 1 of 3 treatments at parturition. Treatments were 0 (Control, 1.5, or 3.0 µg/kg body weight rbTNFα, which were administered once daily by subcutaneous injection for the first 7 days of lactation. Statistical contrasts were used to evaluate the treatment and dose effects of rbTNFα administration. Plasma TNFα concentrations at 16 h post-administration tended to be increased (P0.10 was detected; rbTNFα treatments increased (P0.10 by rbTNFα administration, but 6 out of 16 measured eicosanoids changed (P0.10 by rbTNFα treatment. Glucose turnover rate was unaffected (P=0.18 by rbTNFα administration. The higher dose of rbTNFα tended to increase the risk of cows developing one or more health disorders (P=0.08. Taken together, these results indicate that administration of rbTNFα daily for the first 7 days of lactation altered inflammatory responses, impaired milk production and health, but did not significantly affect liver triglyceride accumulation or nutrient metabolism in dairy cows.

Monte Carlo Method with Heuristic Adjustment for Irregularly Shaped Food Product Volume Measurement

Directory of Open Access Journals (Sweden)

Joko Siswantoro

2014-01-01

Full Text Available Volume measurement plays an important role in the production and processing of food products. Various methods have been proposed to measure the volume of food products with irregular shapes based on 3D reconstruction. However, 3D reconstruction comes with a high-priced computational cost. Furthermore, some of the volume measurement methods based on 3D reconstruction have a low accuracy. Another method for measuring volume of objects uses Monte Carlo method. Monte Carlo method performs volume measurements using random points. Monte Carlo method only requires information regarding whether random points fall inside or outside an object and does not require a 3D reconstruction. This paper proposes volume measurement using a computer vision system for irregularly shaped food products without 3D reconstruction based on Monte Carlo method with heuristic adjustment. Five images of food product were captured using five cameras and processed to produce binary images. Monte Carlo integration with heuristic adjustment was performed to measure the volume based on the information extracted from binary images. The experimental results show that the proposed method provided high accuracy and precision compared to the water displacement method. In addition, the proposed method is more accurate and faster than the space carving method.

Monte Carlo method with heuristic adjustment for irregularly shaped food product volume measurement.

Science.gov (United States)

Siswantoro, Joko; Prabuwono, Anton Satria; Abdullah, Azizi; Idrus, Bahari

2014-01-01

Volume measurement plays an important role in the production and processing of food products. Various methods have been proposed to measure the volume of food products with irregular shapes based on 3D reconstruction. However, 3D reconstruction comes with a high-priced computational cost. Furthermore, some of the volume measurement methods based on 3D reconstruction have a low accuracy. Another method for measuring volume of objects uses Monte Carlo method. Monte Carlo method performs volume measurements using random points. Monte Carlo method only requires information regarding whether random points fall inside or outside an object and does not require a 3D reconstruction. This paper proposes volume measurement using a computer vision system for irregularly shaped food products without 3D reconstruction based on Monte Carlo method with heuristic adjustment. Five images of food product were captured using five cameras and processed to produce binary images. Monte Carlo integration with heuristic adjustment was performed to measure the volume based on the information extracted from binary images. The experimental results show that the proposed method provided high accuracy and precision compared to the water displacement method. In addition, the proposed method is more accurate and faster than the space carving method.

LHCb: Measurement of $J/\\psi$ production cross-section at LHCb

CERN Multimedia

Zhang, Y

2011-01-01

The measurement of the $J/\\psi$ production cross-section with the LHCb detector is presented. The cross-section is measured as a function of the $J/\\psi$ transverse momentum and rapidity, in the forward region. Contributions from prompt $J/\\psi$ and $J/\\psi$ from $b$ are measured separately. Prospects for measurements of the $J/\\psi$ polarisation with a full angular analysis are also shown.

Critical Factors Affecting the Success of Cloning, Expression, and Mass Production of Enzymes by Recombinant E. coli

OpenAIRE

Fakruddin, Md.; Mohammad Mazumdar, Reaz; Bin Mannan, Khanjada Shahnewaj; Chowdhury, Abhijit; Hossain, Md. Nur

2013-01-01

E. coli is the most frequently used host for production of enzymes and other proteins by recombinant DNA technology. E. coli is preferable for its relative simplicity, inexpensive and fast high-density cultivation, well-known genetics, and large number of compatible molecular tools available. Despite all these advantages, expression and production of recombinant enzymes are not always successful and often result in insoluble and nonfunctional proteins. There are many factors that affect the s...

Prioritizing factors affecting the hospital employees' productivity from the hospital managers' viewpoint using integrated decision-making trial and evaluation laboratory and analytic network process

Directory of Open Access Journals (Sweden)

Ardalan Feili

2018-01-01

Full Text Available Objectives: This study aimed to identify and prioritize factors affecting the hospital employees' productivity from the viewpoint of hospital managers working in the teaching hospitals affiliated to Iran, Shiraz University of Medical Sciences, in 2017. Materials and Methods: This was an applied, cross-sectional, and descriptive-analytical study conducted in 2017 in all teaching hospitals affiliated to Iran, Shiraz University of Medical Sciences. After identifying factors affecting hospital employees' productivity using the results of previous studies, all hospital managers (56 managers were selected as the study population using census method to prioritize the factors. The decision-making trial and evaluation laboratory (DEMATEL and analytic network process (ANP techniques were used for analyzing the collected data through Excel 2010 and Super Decision 2.8. Results: Fifteen factors affecting employees' productivity were determined using the results of previous studies which were classified into four clusters. The results of DEMATEL technique showed that “employees' attitude toward the organization” was the most affecting factor (r = 11.928 and also the most affected factor (c = 12.120, as well as the most important factor affecting the employees' productivity (r + c = 24.048. In addition, the results of ANP showed that the cluster of “leadership and management styles” (relative weight [RW] = 0.274 and its factors, especially “involving employees in the decision-making processes” (L1 (RW = 0.102 and “delegation of authority to the employees” (L2 (RW = 0.100 were the most important factors affecting the employees' productivity. Conclusion: According to the results, adopting an appropriate leadership style and providing participatory management, involving the employees in the hospital decision-making processes, etc., had significant effects on the increases in the employees' motivation and productivity.

Accredited dose measurements for validation of radiation sterilized products

DEFF Research Database (Denmark)

Miller, A.

1993-01-01

for control of radiation sterilization. The accredited services include: 1. 1. Irradiation of dosimeters and test samples with cobalt-60 gamma rays. 2. 2. Irradiation of dosimeters and test samples with 10 MeV electrons. 3. 3. Issue of and measurement with calibrated dosimeters. 4. 4. Measurement...... of the dosimetric parameters of an irradiation facility. 5. 5. Measurement of absorbed dose distribution in irradiated products. The paper describes these services and the procedures necessary for their execution....

Top quark pair production cross-section measurements and measurements of $t\\bar{t}+X$ with the ATLAS and CMS detectors

CERN Document Server

Sidoti, Antonio; The ATLAS collaboration

2016-01-01

We present measurements of the inclusive and differential top-quark pair production cross sections in proton-proton collisions with the ATLAS and CMS detector at the LHC. Measurements have been performed at a center of mass energy of 8 TeV and 13 TeV. The inclusive measurements reach high precision and are compared to the best available theoretical calculations. Differential measurements of the kinematic properties of top quark pair production are also discussed. The production of top-quark pairs in association with W and Z bosons is also presented. These processes are important backgrounds to searches for new physics and are all compared to the best available theoretical calculations.

Remote sensing for assessing the zone of benefit where deep drains improve productivity of land affected by shallow saline groundwater.

Science.gov (United States)

Kobryn, H T; Lantzke, R; Bell, R; Admiraal, R

2015-03-01

The installation of deep drains is an engineering approach to remediate land salinised by the influence of shallow groundwater. It is a costly treatment and its economic viability is, in part, dependent on the lateral extent to which the drain increases biological productivity by lowering water tables and soil salinity (referred to as the drains' zone of benefit). Such zones may be determined by assessing the biological productivity response of adjacent vegetation over time. We tested a multi-temporal satellite remote sensing method to analyse temporal and spatial changes in vegetation condition surrounding deep drainage sites at five locations in the Western Australian wheatbelt affected by dryland salinity-Morawa, Pithara, Beacon, Narembeen and Dumbleyung. Vegetation condition as a surrogate for biological productivity was assessed by Normalised Difference Vegetation Index (NDVI) during the peak growing season. Analysis was at the site scale within a 1000 m buffer zone from the drains. There was clear evidence of NDVI increasing with elevation, slope and distance from the drain. After accounting for elevation, slope and distance from the drain, there was a significant increase in NDVI across the five locations after installation of deep drains. Changes in NDVI after drainage were broadly consistent with measured changes at each site in groundwater levels after installation of the deep drains. However, this study assessed the lateral extent of benefit for biological productivity and gave a measure of the area of benefit along the entire length of the drain. The method demonstrated the utility of spring NDVI images for rapid and relatively simple assessment of the change in site condition after implementation of drainage, but approaches for further improvement of the procedure were identified. Copyright © 2014 Elsevier Ltd. All rights reserved.

Factors affecting in vivo measurement precision and accuracy of 109Cd K x-ray fluorescence measurements

International Nuclear Information System (INIS)

McNeill, F.E.; Stokes, L.; Kaye, W.E.

1999-01-01

109 Cd K x-ray fluorescence (XRF) measurement systems from two research centres were used to measure tibia lead content in a population (n=530) of young adults. The group mean bone lead contents (±SEM) determined by McMaster University (n=214) and the University of Maryland (n=316) were 2.80±0.51 and 2.33±0.50 μg Pb/(g bone mineral) respectively. The mean difference of 0.47±0.71 μg Pb/(g bone mineral) was not significant. There was no evidence of a systematic difference between measurements from the two systems. Measurement uncertainties for the young adults were poorer overall than uncertainties for a population of occupationally exposed men. This was because obese subjects and women were included in the study. Regressions of precision against body mass index (BMI, defined as weight/height 2 ) determined that uncertainties increased with BMI and were poorer for women than men. Measurement uncertainties (1σ) were >8 μg Pb/(g bone mineral) for women with a BMI > 0.004 kg cm -2 . Poor-precision data affected population estimates of bone lead content; an inverse correlation was found between precision and bone lead content. A small number (0.4%) of individual measurements with poor uncertainties were inaccurate to within the precision. It is suggested that obese subjects, whose BMI > 0.004 kg cm -2 , should be excluded from 109 Cd K XRF studies, as the measurement provides limited information and may be inaccurate. (author)

Measurement of plasma production and neutralization in gas neutralizers

International Nuclear Information System (INIS)

Maor, D.; Meron, M.; Johnson, B.; Jones, K.; Agagu, A.; Hu, B.

1986-01-01

In order to satisfy the need of experimental data for the designing of gas neutralizers we have started a project aimed at measuring all relevant cross sections for the charge exchange of H - , H 0 and H + projectiles, as well as the cross sections for the production of ions in the target. The expected results of these latter measurements are shown schematically

Measuring and managing radiologist productivity, part 1: clinical metrics and benchmarks.

Science.gov (United States)

Duszak, Richard; Muroff, Lawrence R

2010-06-01

Physician productivity disparities are not uncommonly debated within radiology groups, sometimes in a contentious manner. Attempts to measure productivity, identify and motivate outliers, and develop equitable management policies can present challenges to private and academic practices alike but are often necessary for a variety of professional, financial, and personnel reasons. This is the first of a two-part series that will detail metrics for evaluating radiologist productivity and review published benchmarks, focusing primarily on clinical work. Issues and limitations that may prevent successful implementation of measurement systems are explored. Part 2 will expand that discussion to evaluating nonclinical administrative and academic activities, outlining advantages and disadvantages of addressing differential productivity, and introducing potential models for practices seeking to motivate physicians on the basis of both clinical and nonclinical work.

Evidence for WZ Production and a Measurement of the WZ Production Cross Section

Energy Technology Data Exchange (ETDEWEB)

Degenhardt, James D. [Univ. of Michigan, Ann Arbor, MI (United States)

2007-05-01

This dissertation describes a test of the Standard Model (SM) of particle physics by measuring the probability, or cross section, of simultaneously producing a W boson and a Z boson from proton-antiproton collisions. The SM predicts the cross section of WZ production to be 3.68 ± 0.25 pb. The SM and physics of WZ production are described in Chapter 2 of this dissertation. The 1.96 TeV center-of-mass energy proton-antiproton collisions are provided by the Fermi National Accelerator Laboratory (FNAL) Tevatron Collider. The W and Z particles are detected using the D0 detector, which is described in Chapter 3. The data were collected by the detector during 2002-2006 corresponding to 1 fb^-1 of p{bar p} collisions. This data set is described in Chapter 6. The measurement uses the trilepton (evee, μvee, evμμ, and μvμμ) decay channels, in which a W decays to a charged lepton plus a neutrino and a Z decays to a pair of charged leptons. The W and Z particle selection criteria, detection efficiency, and background determination are described in Chapter 7. We observe 13 candidate events in 1 fb^-1 of p$\\bar{p}$ collisions. In this data set we expect to see 4.5 ± 0.6 background events, and we expect to see 9.2 ± 1.0 signal events. The probability of 4.5 ± 0.6 background events to fluctuate to 13 or more events is 1.2 x 10^-3 which is a 3.0 σ deviation from the background estimate. A log likelihood method is used to determine the most likely cross section as determined by the measured signal efficiencies, the expected backgrounds, and the observed data. Presented in Chapter 8 is a measurement of the cross section for p$\\bar{p}$ → WZ + X at √s = 1.96 TeV. The WZ diboson production cross section is measured to be σ_WZ = 2.7$+1.7\\atop{-1.3}$ pb. This is in agreement with the predicted Standard Model cross section.

Does humor in radio advertising affect recognition of novel product brand names?

Science.gov (United States)

Berg, E M; Lippman, L G

2001-04-01

The authors proposed that item selection during shopping is based on brand name recognition rather than recall. College students rated advertisements and news stories of a simulated radio program for level of amusement (orienting activity) before participating in a surprise recognition test. Humor level of the advertisements was varied systematically, and content was controlled. According to signal detection analysis, humor did not affect the strength of recognition memory for brand names (nonsense units). However, brand names and product types were significantly more likely to be associated when appearing in humorous advertisements than in nonhumorous advertisements. The results are compared with prior findings concerning humor and recall.

ATLAS reach for Quarkonium production and polarization measurements

CERN Document Server

Etzion, Erez; 8th International Conference on Hyperons, Charm and Beauty Hadrons

2009-01-01

The ATLAS detector at CERN's LHC is preparing to take data from the first proton-proton collisions expected in the next few months. We report on the analysis of simulated data samples for production of heavy Quarkonium states J/psi and Upsilon, corresponding to an integrated luminosity of 10 pb^-1 with center of mass energy of 14 TeV expected at the early ATLAS data. We review various aspects of prompt Quarkonium production at LHC: the accessible ranges in transverse momentum and pseudorapidity, spin alignment of vector states, separation of color octet and color singlet production mechanism and feasibility of observing radiative decays Xi_c and Xi_b decays. Strategies of various measurements are outlined and methods of separating promptly produced J/psi and Upsilon mesons from various backgrounds are discussed.

The Sensory Quality of Meat, Game, Poultry, Seafood and Meat Products as Affected by Intense Light Pulses: A Systematic Review

OpenAIRE

Tomasevic, Igor; Rajkovic, Andreja

2015-01-01

The effect of intense light pulses (ILP) on sensory quality of 16 different varieties of meat, meat products, game, poultry and seafood are reviewed. Changes induced by ILP are animal species, type of meat product and fluences applied dependent. ILP significantly deteriorates sensory quality of cooked meat products. It causes less change in the sensory properties of dry cured than cooked meat products while fermented sausage is least affected. The higher fluence applied significantly changes ...

Measurement of open beauty production at HERA in the D*μ final state

International Nuclear Information System (INIS)

Chekanov, S.; Derrick, M.; Magill, S.

2006-09-01

The production of beauty quarks with a D *± and a muon in the final state has been measured with the ZEUS detector at HERA using an integrated luminosity of 114 pb -1 . Low transverse-momentum thresholds for the muon and D * meson allow a measurement of beauty production closer to the production threshold than previous measurements. The beauty signal was extracted using the charge correlations and angular distributions of the muon with respect to the D * meson. Cross sections for photoproduction and deep inelastic scattering are somewhat higher than, but compatible with, next-to-leading-order QCD predictions, and compatible with other measurements. (orig.)

DIFFERENCES OF THE FACTORS AFFECTING THE ATTITUDES OF EMPLOYED INDIVIDUALS TOWARDS GREEN PRODUCT ADVERTISEMENTS BY THEIR DEMOGRAPHIC CHARACTERISTICS

Directory of Open Access Journals (Sweden)

Tahir BENLİ

2018-01-01

Full Text Available The reckless consumption of nature to respond to any need has led to the disruption of natural balance and nearly extinction of environmental resources. Environmental problems created by the damage to the structure of nature not only affect the ecological system, but also pose an immense challenge for human health. Hence, the consumers who have become aware that resources and living spaces to maintain their living conditions have been increasingly declining are inclined to adopt a more sensitive attitude in consumption process. Businesses have also turned to green advertising for the promotion of their products and services to strengthen their presence and elude competition with other businesses under these circumstances. This study aims to identify the factors that affect the consumer attitudes of the employed individuals on green advertisements for the businesses, and examine their differences according to demographic features. The reason for the selection of employed individuals is assumption that they will be effective of consumers having purchasing income especially in qualified green product purchasing decisions. The questionnaire form designed for this purpose was conducted on 400 individuals selected through convenience sampling method among people living in central district of Kastamonu. It was found that the factors affecting these employed individuals attitudes towards green product advertisements significantly differ according to gender, marital status, age, education and occupation

Identifying Qualitative Factors Affecting the Production and Distribution of Information and Knowledge in Science and Technology Parks of Iran

Directory of Open Access Journals (Sweden)

Ali Haji Shamsaei

2017-06-01

Full Text Available This study was conducted in order to identity Qualitative factors affecting the production and distribution of information and knowledge in science and technology parks of Iran. The research was Applied Research in which, qualitative method was carried out. The population of the study was included of 10 managers of Knowledge-based Companies. The data was collected from the population using semi-structured and in-depth interviews. For data analysis, content analysis was used. Results of the qualitative factors affecting the production and distribution of information and knowledge in science and technology parks of Iran, led to extraction of 39 components which were classified in four categories: I Foreign and domestic policy, II Financial and economic support, III Infrastructure barriers and IV Cultural barriers. Results howed that overcoming the political, financial and economic, infrastructural and cultural barriers has undeniable impact on production and distribution of information and knowledge.

Top quark pair production measurements using the ATLAS detector at the LHC

CERN Document Server

Yamauchi, Katsuya; The ATLAS collaboration

2015-01-01

Measurements of the inclusive top quark pair production cross sections in proton-proton collisions with the ATLAS detector at the Large Hadron Collider are presented. The most precise result requires opposite sign electrons and muons and uses the full data-set at a centre-of-mass energy of 7 and 8 TeV. In addition, differential measurements of the top transverse momentum and kinematic properties of the top-anti-top pair are discussed. These measurements, including results using boosted tops, probe our understanding of top pair production in the TeV regime. The results, unfolded to particle and parton level, are compared to recent Monte Carlo generators implementing LO and NLO matrix elements matched with parton showers and NLO QCD calculations. In addition, measurements of the production of top quark pairs in association with gauge bosons or jets are presented.

Measurement of Single-top t-channel Production Using ATLAS Data

CERN Document Server

Holzbauer, Jenny; Schwienhorst, R; Repko, W; Lapidus, L; Pratt, S

2012-01-01

This document reports the measurement of the single-top t-channel cross-section using data from the ATLAS detector, located at the Large Hadron Collider on the border of France and Switzerland. The data used were collected during the first half of 2011, from proton-proton collisions with a 7 TeV center-of-mass collision energy. Single-top is electroweak top-quark production and t-channel is one of the standard model production modes. To isolate this production, selections are applied to find events with a similar final state. A cut-based analysis is used to further isolate the signal using a series of selections in several orthogonal kinematic regions. Finally, a statistical analysis is performed to determine the measured cross-section and the CKM matrix element |Vtb|. The cross-section for top and anti-top production is considered separately and the resulting cross-sections are σ t+ = 59 +18 -16 pb for the positive charge channel and σ t- = 33 +13 -12 pb for the negative charge chan...

New method of noncontact temperature measurement in on-line textile production

Science.gov (United States)

Cheng, Xianping; Song, Xing-Li; Deng, Xing-Zhong

1993-09-01

Based on the condition of textile production the method of infrared non-contact temperature measurement is adcpted in the heat-setting and drying heat-treatment process . This method is used to monitor the moving cloth. The temperature of the cloth is displayed rapidly and exactly. The principle of the temperature measurement is analysed theoretically in this paper. Mathematical analysis and calculation are used for introducing signal transmitting method. Adopted method of combining software with hardware the temperature is corrected and compensated with the aid of a single-chip microcomputer. The results of test indicate that the application of temperature measurement instrument provides reliable parameters in the quality control. And it is an important measure on improving the quality of products.

Restoration of Degraded Salt Affected Lands to Productive Forest Ecosystem

Science.gov (United States)

Singh, Yash; Singh, Gurbachan; Singh, Bajrang; Cerdà, Artemi

2017-04-01

Soil system determines the fluxes of energy and matter in the Earth and is the source of goods, services and resources to the humankind (Keesstra et al., 2012; Brevik et al., 2015; Keesstra et al., 2016). To restore and rehabilitate the soil system is a key strategy to recover the services the soils offers (Celentano et al., 2016; Galati et al., 2016; Parras-Alcantara et al., 2016). Transformation of degraded sodic lands in biodiversity rich productive forest ecosystem is a challenging task before the researchers all over the world. The soils of the degraded sites remain almost unfavorable for the normal growth, development and multiplication of organisms; all our attempts tend to alleviate the soil constraints. Land degradation due to presence of salts in the soil is an alarming threat to agricultural productivity and sustainability, particularly in arid and semiarid regions of the world (Tanji, 1990; Qadir et al., 2006). According to the FAO Land and Nutrition Management Service (2008), over 6% of the world's lands are affected by salinity, which accounts for more than 800 million ha in 100 countries. This is due to natural causes, extensive utilization of land (Egamberdieva et al., 2008), poor drainage systems and limited availability of irrigation water which causes salinization in many irrigated soils (Town et al., 2008).In India, about 6.73 million ha are salt affected which spread in 194 districts out of 584 districts in India and represents 2.1% of the geographical area of the country (Mandal et al., 2009).Out of these, 2.8 million ha are sodic in nature and primarily occurring in the Indo-Gangetic alluvial plains. These lands are degraded in structural, chemical, nutritional, hydrological and microbiological characteristics. The reclamation of salt affected soils with chemical amendments like gypsum and phospho-gypsum are in practice for the cultivation field crops under agricultural production. Forest development on such lands although takes considerable

Histamine poisoning and control measures in fish and fishery products

Directory of Open Access Journals (Sweden)

Pierina eVisciano

2014-09-01

Full Text Available Histamine poisoning is one of the most common form of intoxication caused by the ingestion of fish and fishery products. Cooking, canning or freezing cannot reduce the levels of histamine because this compound is heat stable. All humans are susceptible to histamine and its effects can be described as intolerance or intoxication depending on the severity of the symptoms. The amount of histamine in food, the individual sensitivity and the detoxification activity in human organism represent the main factors affecting the toxicological response in consumers. Histamine is the only biogenic amine with regulatory limits set by European Legislation, up to a maximum of 200 mg/kg in fresh fish and 400 mg/kg in fishery products treated by enzyme maturation in brine.

Measuring stigma affecting sex workers (SW) and men who have sex with men (MSM): A systematic review

Science.gov (United States)

Fitzgerald-Husek, Alanna; Van Wert, Michael J.; Ewing, Whitney F.; Holland, Claire E.; Katterl, Rachel; Rosman, Lori; Baral, Stefan D.

2017-01-01

Background Stigma involves discrediting a person or group based on a perceived attribute, behaviour or reputation associated with them. Sex workers (SW) and men who have sex with men (MSM) are key populations who are often at increased risk for the acquisition and transmission of HIV and who are affected by stigma that can negatively impact their health and well-being. Although stigma was included as an indicator in the US National HIV/AIDS Strategic Plan and there have been consultations focused on adding a stigma indicator within PEPFAR and the Global Fund in relation to potentiating HIV risks among key populations, there remains limited consensus on the appropriate measurement of SW- or MSM-associated stigma. Consequently, this systematic review summarizes studies using quantitative, qualitative, or mixed methods approaches to measure stigma affecting sex workers and men who have sex with men. Methods and findings This systematic review included English, French, and Spanish peer-reviewed research of any study design measuring SW- or MSM-associated stigma. Articles were published from January 1, 2004 to March 26, 2014 in PsycINFO, PubMed, EMBASE, CINAHL Plus, Global Health, and World Health Organization Global Health Library Regional Indexes. Of the 541 articles reviewed, the majority measured stigma toward MSM (over 97%), were conducted in North America, used quantitative methods, and focused on internalized stigma. Conclusions With the inclusion of addressing stigma in several domestic and international HIV strategies, there is a need to ensure the use of validated metrics for stigma. The field to date has completed limited measurement of stigma affecting sex workers, and limited measurement of stigma affecting MSM outside of higher income settings. Moving forward requires a concerted effort integrating validated metrics of stigma into health-related surveys and programs for key populations. PMID:29190642

Measuring stigma affecting sex workers (SW and men who have sex with men (MSM: A systematic review.

Directory of Open Access Journals (Sweden)

Alanna Fitzgerald-Husek

Full Text Available Stigma involves discrediting a person or group based on a perceived attribute, behaviour or reputation associated with them. Sex workers (SW and men who have sex with men (MSM are key populations who are often at increased risk for the acquisition and transmission of HIV and who are affected by stigma that can negatively impact their health and well-being. Although stigma was included as an indicator in the US National HIV/AIDS Strategic Plan and there have been consultations focused on adding a stigma indicator within PEPFAR and the Global Fund in relation to potentiating HIV risks among key populations, there remains limited consensus on the appropriate measurement of SW- or MSM-associated stigma. Consequently, this systematic review summarizes studies using quantitative, qualitative, or mixed methods approaches to measure stigma affecting sex workers and men who have sex with men.This systematic review included English, French, and Spanish peer-reviewed research of any study design measuring SW- or MSM-associated stigma. Articles were published from January 1, 2004 to March 26, 2014 in PsycINFO, PubMed, EMBASE, CINAHL Plus, Global Health, and World Health Organization Global Health Library Regional Indexes. Of the 541 articles reviewed, the majority measured stigma toward MSM (over 97%, were conducted in North America, used quantitative methods, and focused on internalized stigma.With the inclusion of addressing stigma in several domestic and international HIV strategies, there is a need to ensure the use of validated metrics for stigma. The field to date has completed limited measurement of stigma affecting sex workers, and limited measurement of stigma affecting MSM outside of higher income settings. Moving forward requires a concerted effort integrating validated metrics of stigma into health-related surveys and programs for key populations.

Divergence for residual feed intake of Holstein-Friesian cattle during growth did not affect production and reproduction during lactation.

Science.gov (United States)

Macdonald, K A; Thomson, B P; Waghorn, G C

2016-11-01

Residual feed intake (RFI) is the difference between actual and predicted dry matter intake (DMI) of individual animals. Recent studies with Holstein-Friesian calves have identified an ~20% difference in RFI during growth (calf RFI) and these groups remained divergent in RFI during lactation. The objective of the experiment described here was to determine if cows selected for divergent RFI as calves differed in milk production, reproduction or in the profiles of BW and body condition score (BCS) change during lactation, when grazing pasture. The cows used in the experiment (n=126) had an RFI of -0.88 and +0.75 kg DM intake/day for growth as calves (efficient and inefficient calf RFI groups, respectively) and were intensively grazed at four stocking rates (SR) of 2.2, 2.6, 3.1 and 3.6 cows/ha on self-contained farmlets, over 3 years. Each SR treatment had equal number of cows identified as low and high calf RFI, with 24, 28, 34 and 40/11 ha farmlet. The cows divergent for calf RFI were randomly allocated to each SR. Although SR affected production, calf RFI group (low or high) did not affect milk production, reproduction, BW, BCS or changes in these parameters throughout lactation. The most efficient animals (low calf RFI) lost similar BW and BCS as the least efficient (high calf RFI) immediately post-calving, and regained similar BW and BCS before their next calving. These results indicate that selection for RFI as calves to increase efficiency of feed utilisation did not negatively affect farm productivity variables (milk production, BCS, BW and reproduction) as adults when managed under an intensive pastoral grazing system.

Factors affecting RFID adoption in the agricultural product distribution industry: empirical evidence from China.

Science.gov (United States)

Shi, Ping; Yan, Bo

2016-01-01

We conducted an exploratory investigation of factors influencing the adoption of radio frequency identification (RFID) methods in the agricultural product distribution industry. Through a literature review and field research, and based on the technology-organization-environment (TOE) theoretical framework, this paper analyzes factors influencing RFID adoption in the agricultural product distribution industry in reference to three contexts: technological, organizational, and environmental contexts. An empirical analysis of the TOE framework was conducted by applying structural equation modeling based on actual data from a questionnaire survey on the agricultural product distribution industry in China. The results show that employee resistance and uncertainty are not supported by the model. Technological compatibility, perceived effectiveness, organizational size, upper management support, trust between enterprises, technical knowledge, competitive pressure and support from the Chinese government, which are supported by the model, have significantly positive effects on RFID adoption. Meanwhile, organizational size has the strongest positive effect, while competitive pressure levels have the smallest effect. Technological complexities and costs have significantly negative effects on RFID adoption, with cost being the most significantly negative influencing factor. These research findings will afford enterprises in the agricultural products supply chain with a stronger understanding of the factors that influence RFID adoption in the agricultural product distribution industry. In addition, these findings will help enterprises remain aware of how these factors affect RFID adoption and will thus help enterprises make more accurate and rational decisions by promoting RFID application in the agricultural product distribution industry.

Source-to-detector distance and beam center do not affect radiographic measurements of acetabular morphology

International Nuclear Information System (INIS)

Goldman, Ashton H.; Hoover, Kevin B.

2017-01-01

Multiple radiographic acquisition techniques have been evaluated for their effect on measurements of acetabular morphology. This cadaveric study examined the effect of two acquisition parameters not previously evaluated: beam center position and source-to-detector distance. This study also evaluated the effect of reader differences on measurements. Following calibration of measurements between two readers using five clinical radiographs (training), radiographs were obtained from two cadavers using four different source-to-detector distances and three different radiographic centers for a total of 12 radiographic techniques (experimental). Two physician readers acquired four types of measurements from each cadaver radiograph: lateral center edge angle, peak-to-edge distance, Sharp's angle, and the Tonnis angle. All measurements were evaluated for intra-class correlation coefficient (ICC), kappa statistics for hip dysplasia, and factors that resulted in measurement differences using a mixed statistical model. After training of the two physician readers, there was strong agreement in their hip morphology measurements (ICC 0.84-0.93), agreement in the presence of hip dysplasia (κ = 0.58-1.0), and no measurement difference between physician readers (p = 0.12-1.0). Experimental cadaver measurements showed moderate-to-strong agreement of the readers (ICC 0.74-0.93) and complete agreement on dysplasia (κ = 1). After accounting for reader and radiographic technique, there was no difference in hip morphology measurements (p = 0.83-0.99). In this cadaveric study, measurements of hip morphology were not affected by varying source-to-detector distance or beam center. We conclude that these acquisition parameters are not likely to affect the diagnosis of hip dysplasia in a clinical setting. (orig.)

Source-to-detector distance and beam center do not affect radiographic measurements of acetabular morphology

Energy Technology Data Exchange (ETDEWEB)

Goldman, Ashton H. [Department of Orthopaedic Surgery, Virginia Commonwealth University, Richmond, VA (United States); Hoover, Kevin B. [Virginia Commonwealth University, Department of Radiology, 1250 E Marshall St. 3rd Floor, PO Box 980615, Richmond, VA (United States)

2017-04-15

Multiple radiographic acquisition techniques have been evaluated for their effect on measurements of acetabular morphology. This cadaveric study examined the effect of two acquisition parameters not previously evaluated: beam center position and source-to-detector distance. This study also evaluated the effect of reader differences on measurements. Following calibration of measurements between two readers using five clinical radiographs (training), radiographs were obtained from two cadavers using four different source-to-detector distances and three different radiographic centers for a total of 12 radiographic techniques (experimental). Two physician readers acquired four types of measurements from each cadaver radiograph: lateral center edge angle, peak-to-edge distance, Sharp's angle, and the Tonnis angle. All measurements were evaluated for intra-class correlation coefficient (ICC), kappa statistics for hip dysplasia, and factors that resulted in measurement differences using a mixed statistical model. After training of the two physician readers, there was strong agreement in their hip morphology measurements (ICC 0.84-0.93), agreement in the presence of hip dysplasia (κ = 0.58-1.0), and no measurement difference between physician readers (p = 0.12-1.0). Experimental cadaver measurements showed moderate-to-strong agreement of the readers (ICC 0.74-0.93) and complete agreement on dysplasia (κ = 1). After accounting for reader and radiographic technique, there was no difference in hip morphology measurements (p = 0.83-0.99). In this cadaveric study, measurements of hip morphology were not affected by varying source-to-detector distance or beam center. We conclude that these acquisition parameters are not likely to affect the diagnosis of hip dysplasia in a clinical setting. (orig.)

40 CFR Table 2 to Subpart Xxxx of... - Emission Limits for Tire Cord Production Affected Sources

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 12 2010-07-01 2010-07-01 true Emission Limits for Tire Cord Production Affected Sources 2 Table 2 to Subpart XXXX of Part 63 Protection of Environment ENVIRONMENTAL... Manufacturing Pt. 63, Subpt. XXXX, Table 2 Table 2 to Subpart XXXX of Part 63—Emission Limits for Tire Cord...

Measurement of isolated photon production in deep-inelastic scattering at HERA

Science.gov (United States)

Aaron, F. D.; Aktas, A.; Alexa, C.; Andreev, V.; Antunovic, B.; Aplin, S.; Asmone, A.; Astvatsatourov, A.; Backovic, S.; Baghdasaryan, A.; Baranov, P.; Barrelet, E.; Bartel, W.; Baudrand, S.; Beckingham, M.; Begzsuren, K.; Behnke, O.; Behrendt, O.; Belousov, A.; Berger, N.; Bizot, J. C.; Boenig, M.-O.; Boudry, V.; Bozovic-Jelisavcic, I.; Bracinik, J.; Brandt, G.; Brinkmann, M.; Brisson, V.; Bruncko, D.; Büsser, F. W.; Bunyatyan, A.; Buschhorn, G.; Bystritskaya, L.; Campbell, A. J.; Cantun Avila, K. B.; Cassol-Brunner, F.; Cerny, K.; Cerny, V.; Chekelian, V.; Cholewa, A.; Contreras, J. G.; Coughlan, J. A.; Cozzika, G.; Cvach, J.; Dainton, J. B.; Daum, K.; Deak, M.; de Boer, Y.; Delcourt, B.; Del Degan, M.; Delvax, J.; de Roeck, A.; de Wolf, E. A.; Diaconu, C.; Dodonov, V.; Dubak, A.; Eckerlin, G.; Efremenko, V.; Egli, S.; Eichler, R.; Eisele, F.; Eliseev, A.; Elsen, E.; Essenov, S.; Falkiewicz, A.; Faulkner, P. J. W.; Favart, L.; Fedotov, A.; Felst, R.; Feltesse, J.; Ferencei, J.; Finke, L.; Fleischer, M.; Fomenko, A.; Franke, G.; Frisson, T.; Gabathuler, E.; Gayler, J.; Ghazaryan, S.; Ginzburgskaya, S.; Glazov, A.; Glushkov, I.; Goerlich, L.; Goettlich, M.; Gogitidze, N.; Gorbounov, S.; Gouzevitch, M.; Grab, C.; Greenshaw, T.; Grell, B. R.; Grindhammer, G.; Habib, S.; Haidt, D.; Hansson, M.; Heinzelmann, G.; Helebrant, C.; Henderson, R. C. W.; Henschel, H.; Herrera, G.; Hildebrandt, M.; Hiller, K. H.; Hoffmann, D.; Horisberger, R.; Hovhannisyan, A.; Hreus, T.; Jacquet, M.; Janssen, M. E.; Janssen, X.; Jemanov, V.; Jönsson, L.; Johnson, D. P.; Jung, A. W.; Jung, H.; Kapichine, M.; Katzy, J.; Kenyon, I. R.; Kiesling, C.; Klein, M.; Kleinwort, C.; Klimkovich, T.; Kluge, T.; Knutsson, A.; Korbel, V.; Kostka, P.; Kraemer, M.; Krastev, K.; Kretzschmar, J.; Kropivnitskaya, A.; Krüger, K.; Landon, M. P. J.; Lange, W.; Laštovička-Medin, G.; Laycock, P.; Lebedev, A.; Leibenguth, G.; Lendermann, V.; Levonian, S.; Li, G.; Lindfeld, L.; Lipka, K.; Liptaj, A.; List, B.; List, J.; Loktionova, N.; Lopez-Fernandez, R.; Lubimov, V.; Lucaci-Timoce, A.-I.; Lytkin, L.; Makankine, A.; Malinovski, E.; Marage, P.; Marti, L.; Martisikova, M.; Martyn, H.-U.; Maxfield, S. J.; Mehta, A.; Meier, K.; Meyer, A. B.; Meyer, H.; Meyer, H.; Meyer, J.; Michels, V.; Mikocki, S.; Milcewicz-Mika, I.; Mohamed, A.; Moreau, F.; Morozov, A.; Morris, J. V.; Mozer, M. U.; Müller, K.; Murín, P.; Nankov, K.; Naroska, B.; Naumann, T.; Newman, P. R.; Niebuhr, C.; Nikiforov, A.; Nowak, G.; Nowak, K.; Nozicka, M.; Oganezov, R.; Olivier, B.; Olsson, J. E.; Osman, S.; Ozerov, D.; Palichik, V.; Panagoulias, I.; Pandurovic, M.; Papadopoulou, T.; Pascaud, C.; Patel, G. D.; Peng, H.; Perez, E.; Perez-Astudillo, D.; Perieanu, A.; Petrukhin, A.; Picuric, I.; Piec, S.; Pitzl, D.; Plačakytė, R.; Polifka, R.; Povh, B.; Preda, T.; Prideaux, P.; Radescu, V.; Rahmat, A. J.; Raicevic, N.; Ravdandorj, T.; Reimer, P.; Risler, C.; Rizvi, E.; Robmann, P.; Roland, B.; Roosen, R.; Rostovtsev, A.; Rurikova, Z.; Rusakov, S.; Salek, D.; Salvaire, F.; Sankey, D. P. C.; Sauter, M.; Sauvan, E.; Schmidt, S.; Schmitt, S.; Schmitz, C.; Schoeffel, L.; Schöning, A.; Schultz-Coulon, H.-C.; Sefkow, F.; Shaw-West, R. N.; Sheviakov, I.; Shtarkov, L. N.; Sloan, T.; Smiljanic, I.; Smirnov, P.; Soloviev, Y.; South, D.; Spaskov, V.; Specka, A.; Staykova, Z.; Steder, M.; Stella, B.; Stiewe, J.; Straumann, U.; Sunar, D.; Sykora, T.; Tchoulakov, V.; Thompson, G.; Thompson, P. D.; Toll, T.; Tomasz, F.; Tran, T. H.; Traynor, D.; Trinh, T. N.; Truöl, P.; Tsakov, I.; Tseepeldorj, B.; Tsipolitis, G.; Tsurin, I.; Turnau, J.; Tzamariudaki, E.; Urban, K.; Utkin, D.; Valkárová, A.; Vallée, C.; van Mechelen, P.; Vargas Trevino, A.; Vazdik, Y.; Vinokurova, S.; Volchinski, V.; Weber, G.; Weber, R.; Wegener, D.; Werner, C.; Wessels, M.; Wissing, C.; Wolf, R.; Wünsch, E.; Xella, S.; Yeganov, V.; Žáček, J.; Zálešák, J.; Zhang, Z.; Zhelezov, A.; Zhokin, A.; Zhu, Y. C.; Zimmermann, T.; Zohrabyan, H.; Zomer, F.

2008-04-01

The production of isolated photons in deep-inelastic scattering ep→eγX is measured with the H1 detector at HERA. The measurement is performed in the kinematic range of negative four-momentum transfer squared 450 GeV. The analysis is based on a total integrated luminosity of 227 pb-1. The production cross section of isolated photons with a transverse energy in the range 3measured as a function of ET γ, ηγ and Q2. Isolated photon cross sections are also measured for events with no jets or at least one hadronic jet. The measurements are compared with predictions from Monte Carlo generators modelling the photon radiation from the quark and the electron lines, as well as with calculations at leading and next to leading order in the strong coupling. The predictions significantly underestimate the measured cross sections.

Measurement of Isolated Photon Production in Deep-Inelastic Scattering at HERA

CERN Document Server

Aaron, F.D.; Alexa, C.; Andreev, V.; Antunovic, B.; Aplin, S.; Asmone, A.; Astvatsatourov, A.; Backovic, S.; Baghdasaryan, A.; Baranov, P.; Barrelet, E.; Bartel, W.; Baudrand, S.; Beckingham, M.; Begzsuren, K.; Behnke, O.; Behrendt, O.; Belousov, A.; Berger, N.; Bizot, J.C.; Boenig, M.O.; Boudry, V.; Bozovic-Jelisavcic, I.; Bracinik, J.; Brandt, G.; Brinkmann, M.; Brisson, V.; Bruncko, D.; Busser, F.W.; Bunyatyan, A.; Buschhorn, G.; Bystritskaya, L.; Campbell, A.J.; Cantun Avila, K.B.; Cassol-Brunner, F.; Cerny, K.; Cerny, V.; Chekelian, V.; Cholewa, A.; Contreras, J.G.; Coughlan, J.A.; Cozzika, G.; Cvach, J.; Dainton, J.B.; Daum, K.; Deak, M.; de Boer, Y.; Delcourt, B.; Del Degan, M.; Delvax, J.; De Roeck, A.; De Wolf, E.A.; Diaconu, C.; Dodonov, V.; Dubak, A.; Eckerlin, G.; Efremenko, V.; Egli, S.; Eichler, R.; Eisele, F.; Eliseev, A.; Elsen, E.; Essenov, S.; Falkiewicz, A.; Faulkner, P.J.W.; Favart, L.; Fedotov, A.; Felst, R.; Feltesse, J.; Ferencei, J.; Finke, L.; Fleischer, M.; Fomenko, A.; Franke, G.; Frisson, T.; Gabathuler, E.; Gayler, J.; Ghazaryan, S.; Ginzburgskaya, S.; Glazov, A.; Glushkov, I.; Goerlich, L.; Goettlich, M.; Gogitidze, N.; Gorbounov, S.; Gouzevitch, M.; Grab, C.; Greenshaw, T.; Grell, B.R.; Grindhammer, G.; Habib, S.; Haidt, D.; Hansson, M.; Heinzelmann, G.; Helebrant, C.; Henderson, R.C.W.; Henschel, H.; Herrera, G.; Hildebrandt, M.; Hiller, K.H.; Hoffmann, D.; Horisberger, R.; Hovhannisyan, A.; Hreus, T.; Jacquet, M.; Janssen, M.E.; Janssen, X.; Jemanov, V.; Jonsson, L.; Johnson, D.P.; Jung, A.W.; Jung, H.; Kapichine, M.; Katzy, J.; Kenyon, I.R.; Kiesling, C.; Klein, M.; Kleinwort, C.; Klimkovich, T.; Kluge, T.; Knutsson, A.; Korbel, V.; Kostka, P.; Kraemer, M.; Krastev, K.; Kretzschmar, J.; Kropivnitskaya, A.; Kruger, K.; Landon, M.P.J.; Lange, W.; Lastovicka-Medin, G.; Laycock, P.; Lebedev, A.; Leibenguth, G.; Lendermann, V.; Levonian, S.; Li, G.; Lindfeld, L.; Lipka, K.; Liptaj, A.; List, B.; List, J.; Loktionova, N.; Lopez-Fernandez, R.; Lubimov, V.; Lucaci-Timoce, A.I.; Lytkin, L.; Makankine, A.; Malinovski, E.; Marage, P.; Marti, L.; Martisikova, M.; Martyn, H.U.; Maxfield, S.J.; Mehta, A.; Meier, K.; Meyer, A.B.; Meyer, H.; Meyer, H.; Meyer, J.; Michels, V.; Mikocki, S.; Milcewicz-Mika, I.; Mohamed, A.; Moreau, F.; Morozov, A.; Morris, J.V.; Mozer, M.U.; Muller, K.; Murin, P.; Nankov, K.; Naroska, B.; Naumann, T.; Newman, P.R.; Niebuhr, C.; Nikiforov, A.; Nowak, G.; Nowak, K.; Nozicka, M.; Oganezov, R.; Olivier, B.; Olsson, J.E.; Osman, S.; Ozerov, D.; Palichik, V.; Panagoulias, I.; Pandurovic, M.; Papadopoulou, T.; Pascaud, C.; Patel, G.D.; Peng, H.; Perez, E.; Perez-Astudillo, D.; Perieanu, A.; Petrukhin, A.; Picuric, I.; Piec, S.; Pitzl, D.; Placakyte, R.; Polifka, R.; Povh, B.; Preda, T.; Prideaux, P.; Radescu, V.; Rahmat, A.J.; Raicevic, N.; Ravdandorj, T.; Reimer, P.; Risler, C.; Rizvi, E.; Robmann, P.; Roland, B.; Roosen, R.; Rostovtsev, A.; Rurikova, Z.; Rusakov, S.; Salek, D.; Salvaire, F.; Sankey, D.P.C.; Sauter, M.; Sauvan, E.; Schmidt, S.; Schmitt, S.; Schmitz, C.; Schoeffel, L.; Schoning, A.; Schultz-Coulon, H.C.; Sefkow, F.; Shaw-West, R.N.; Sheviakov, I.; Shtarkov, L.N.; Sloan, T.; Smiljanic, I.; Smirnov, P.; Soloviev, Y.; South, D.; Spaskov, V.; Specka, A.; Staykova, Z.; Steder, M.; Stella, B.; Stiewe, J.; Straumann, U.; Sunar, D.; Sykora, T.; Tchoulakov, V.; Thompson, G.; Thompson, P.D.; Toll, T.; Tomasz, F.; Tran, T.H.; Traynor, D.; Trinh, T.N.; Truol, P.; Tsakov, I.; Tseepeldorj, B.; Tsipolitis, G.; Tsurin, I.; Turnau, J.; Tzamariudaki, E.; Urban, K.; Utkin, D.; Valkarova, A.; Vallee, C.; Van Mechelen, P.; Vargas Trevino, A.; Vazdik, Y.; Vinokurova, S.; Volchinski, V.; Weber, G.; Weber, R.; Wegener, D.; Werner, C.; Wessels, M.; Wissing, C.; Wolf, R.; Wunsch, E.; Xella, S.; Yeganov, V.; Zacek, J.; Zalesak, J.; Zhang, Z.; Zhelezov, A.; Zhokin, A.; Zhu, Y.C.; Zimmermann, T.; Zohrabyan, H.; Zomer, F.

2008-01-01

The production of isolated photons in deep-inelastic scattering $ep\\to e \\gamma X$ is measured with the H1 detector at HERA. The measurement is performed in the kinematic range of negative four-momentum transfer squared $450$ GeV. The analysis is based on a total integrated luminosity of 227~pb$^{-1}$. The production cross section of isolatedphotons with a transverse energy in the range $3 < E_T^\\gamma < 10$ GeV and pseudorapidity range $-1.2 < \\eta^\\gamma < 1.8$ is measured as a function of $E_T^\\gamma$, $\\eta^\\gamma$ and $Q^2$. Isolated photon cross sections are also measured for events with no jets or at least one hadronic jet. The measurements are compared with predictions from Monte Carlo generators modelling the photon radiation from the quark and the electron lines, as well as with calculations at leading and next to leading order in the strong coupling. The predictions significantly underestimate the measured cross sections.

Does species richness affect fine root biomass and production in young forest plantations?

DEFF Research Database (Denmark)

Domisch, Timo; Finér, Leena; Dawud, Seid Muhie

2015-01-01

Tree species diversity has been reported to increase forest ecosystem above-ground biomass and productivity, but little is known about below-ground biomass and production in diverse mixed forests compared to single-species forests. For testing whether species richness increases below-ground biomass...... and production and thus complementarity between forest tree species in young stands, we determined fine root biomass and production of trees and ground vegetation in two experimental plantations representing gradients in tree species richness. Additionally, we measured tree fine root length and determined...... be that these stands were still young, and canopy closure had not always taken place, i.e. a situation where above- or below-ground competition did not yet exist. Another reason could be that the rooting traits of the tree species did not differ sufficiently to support niche differentiation. Our results suggested...

Measurement of isolated photon production in deep inelastic ep scattering

International Nuclear Information System (INIS)

Chekanov, S.; Derrick, M.; Magill, S.

2009-09-01

Isolated photon production in deep inelastic ep scattering has been measured with the ZEUS detector at HERA using an integrated luminosity of 320 pb -1 . Measurements were made in the isolated-photon transverse-energy and pseudo- rapidity ranges 4 T γ γ 2 , in the range 10 2 2 and for invariant masses of the hadronic system W X >5 GeV. Differential cross sections are presented for inclusive isolated photon production as functions of Q 2 , x, E T γ and η γ . Leading-logarithm parton-shower Monte Carlo simulations and perturbative QCD predictions give a reasonable description of the data over most of the kinematic range. (orig.)

Measurement of associated charm production induced by 400 GeV/c protons

CERN Document Server

Akmete, A; Anokhina, A; Aoki, S; Atkin, E; Azorskiy, N; Back, JJ; Bagulya, A; Baranov, A; Barker, GJ; Battistin, M; Bauche, J; Bay, A; Bayliss, V; Bencivenni, G; Berdnikov, AY; Berdnikov, YA; Bertani, M; Betancourt, C; Bezshyiko, I; Bezshyyko, O; Bick, D; Bieschke, S; Blanco, A; Boehm, J; Bogomilov, M; Bondarenko, K; Bonivento, WM; Borburgh, J; Boyarsky, A; Brenner, R; Breton, D; Brundler, R; Bruschi, M; B\\"{u}scher, V; Buonaura, A; Buonocore, L; Buontempo, S; Cadeddu, S; Calcaterra, A; Calviani, M; Campanelli, M; Chau, P; Chauveau, J; Chepurnov, A; Chernyavskiy, M; Choi, K-Y; Chumakov, A; Ciambrone, P; Cornelis, K; Cristinziani, M; Dallavalle, GM; Datwyler, A; D'Ambrosio, N; D'Appollonio, G; De Carvalho Saraiva, J; De Lellis, G; De Roeck, A; De Serio, M; Dedenko, L; Dergachev, P; Di Crescenzo, A; Di Marco, N; Dib, C; Dijkstra, H; Dmitrenko, V; Dmitrievskiy, S; Domenici, D; Donskov, S; Dubreuil, A; Ebert, J; Ehlert, M; Enik, T; Etenko, A; Fabbri, F; Fabbri, L; Fabich, A; Fedin, O; Fedorova, G; Felici, G; Ferro-Luzzi, M; Fini, RA; Fonte, P; Franco, C; Fraser, M; Froeschl, R; Fukuda, T; Galati, G; Gavrilov, G; Gerlach, S; Goddard, B; Golinka-Bezshyyko, L; Golovatiuk, A; Golubkov, D; Golutvin, A; Gorbunov, D; Gorbunov, P; Gorbunov, S; Gorkavenko, V; Gornushkin, Y; Gorshenkov, M; Grachev, V; Graverini, E; Grenard, J-L; Grichine, V; Gruzinskii, N; Guler, A~M; Guz, Yu; Hagner, C; Hakobyan, H; van Herwijnen, E; Hollnagel, A; Hosseini, B; Hushchyn, M; Iaselli, G; Iuliano, A; Jacobsson, R; Jokovi\\'{c}, D; Jonker, M; Kadenko, I; Kamiscioglu, C; Kamiscioglu, M; Karaman, M; Khabibullin, M; Khaustov, G; Khotyantsev, A; Kim, SH; Kim, V; Kim, YG; Kitagawa, N; Ko, J-W; Kodama, K; Kolesnikov, A; Kolev, DI; Kolosov, V; Komatsu, M; Kono, A; Konovalova, N; Korkmaz, MA; Korol, I; Korol'ko, I; Korzenev, A; Kostyukhin, V; Kovalenko, S; Krasilnikova, I; Krivova, K; Kudenko, Y; Kurbatov, P; Kurochka, V; Kuznetsova, E; Lacker, HM; Lai, A; Lanfranchi, G; Lantwin, O; Lauria, A; Lebbolo, H; Lee, KS; Lee, KY; L\\'{e}vy, J-M; Likhacheva, V; Lopes, L; Lyubovitsky, V; Maalmi, J; Magnan, A; Maleev, V; Malinin, A; Manabe, Y; Manfredi, M; Mefodev, A; Mermod, P; Mikado, S; Mikhaylov, Yu; Milstead, DA; Mineev, O; Montanari, A; Montesi, MC; Morishima, K; Movchan, S; Naganawa, N; Nakamura, M; Nakano, T; Nishio, A; Novikov, A; Obinyakov, B; Ogawa, S; Okateva, N; Osborne, J; Ovchynnikov, M; Owtscharenko, N; Owen, PH; Pacholek, P; Paoloni, A; Park, BD; Park, SK; Paparella, R; Pastore, A; Patel, M; Pereyma, D; Perillo-Marcone, A; Petrenko, D; Petridis, K; Podgrudkov, D; Poliakov, V; Polukhina, N; Prokudin, M; Prota, A; Rademakers, A; Rakai, A; Ratnikov, F; Rawlings, T; Razeti, M; Redi, F; Ricciardi, S; Rinaldesi, M; Rodin, Volodymyr; Rodin, Viktor; Roganova, T; Rogozhnikov, A; Rokujo, H; Rosa, G; Rovelli, T; Ruchayskiy, O; Ruf, T; Samoylenko, V; Ull, A~Sanz; Saputi, A; Sato, O; Savchenko, ES; Schliwinski, J; Schmidt-Parzefall, W; Serra, N; Sgobba, S; Shadura, O; Shakin, A; Shaposhnikov, M; Shatalov, P; Shchedrina, T; Shchutska, L; Shevchenko, V; Shibuya, H; Shustov, A; Silverstein, SB; Simone, S; Simoniello, R; Skorokhvatov, M; Smirnov, S; Sohn, JY; Sokolenko, A; Solodko, E; Solovev, V; Starkov, N; Storaci, B; Strolin, P; Sukhonos, D; Suzuki, Y; Takahashi, S; Timiryasov, I; Tioukov, V; Tommasini, D; Torii, M; Tosi, N; Tramontano, F; Treille, D; Tsenov, R; Ulin, S; Ustyuzhanin, A; Uteshev, Z; Vankova-Kirilova, G; Vannucci, F; Venkova, P; Venturi, V; Vilchinski, S; Villa, M; Vincke, Heinz; Vincke, Helmuth; Vlasik, K; Volkov, A; Voronkov, R; Wanke, R; Woo, J-K; Wurm, M; Xella, S; Yilmaz, D; Yilmazer, AU; Yoon, CS; Zaytsev, Yu

2017-01-01

An important input for the interpretation of the measurements of the SHiP ex- periment is a good knowledge of the differential charm production cross section, including cascade production. This is a proposal to measure the associated charm production cross section, employing the SPS 400 GeV/c proton beam and a replica of the first two interaction lengths of the SHiP target. The detection of the produc- tion and decay of charmed hadron in the target will be performed through nuclear emulsion films, employed in an Emulsion Cloud Chamber target structure. In order to measure charge and momentum of decay daughters, we intend to build a mag- netic spectrometer using silicon pixel, scintillating fibre and drift tube detectors. A muon tagger will be built using RPCs. An optimization run is scheduled in 2018, while the full measurement will be performed after the second LHC Long Shutdown.

Top quark production cross-section measurements with the ATLAS detector at EPS-HEP 2017

CERN Document Server

Pollard, Christopher Samuel; The ATLAS collaboration

2017-01-01

Measurements of the inclusive and differential top-quark pair and single-top production cross sections in proton-proton collisions with the ATLAS detector at the Large Hadron Collider at center-of-mass energies of 8 TeV and 13 TeV are presented. The inclusive measurements reach high precision and are compared to the best available theoretical calculations. Differential measurements of the kinematic properties of the top-quark production are also discussed. These measurements, including results using boosted tops, probe our understanding of top-quark pair production in the TeV regime.

TNFα Altered Inflammatory Responses, Impaired Health and Productivity, but Did Not Affect Glucose or Lipid Metabolism in Early-Lactation Dairy Cows

Science.gov (United States)

Mamedova, Laman K.; Sordillo, Lorraine M.; Bradford, Barry J.

2013-01-01

Inflammation may be a major contributing factor to peripartum metabolic disorders in dairy cattle. We tested whether administering an inflammatory cytokine, recombinant bovine tumor necrosis factor-α (rbTNFα), affects milk production, metabolism, and health during this period. Thirty-three Holstein cows (9 primiparous and 24 multiparous) were randomly assigned to 1 of 3 treatments at parturition. Treatments were 0 (Control), 1.5, or 3.0 µg/kg body weight rbTNFα, which were administered once daily by subcutaneous injection for the first 7 days of lactation. Statistical contrasts were used to evaluate the treatment and dose effects of rbTNFα administration. Plasma TNFα concentrations at 16 h post-administration tended to be increased (P0.10) was detected; rbTNFα treatments increased (P0.10) by rbTNFα administration, but 6 out of 16 measured eicosanoids changed (Pinsulin, β-hydroxybutyrate, non-esterified fatty acids, triglyceride, 3-methylhistidine, and liver triglyceride were unaffected (P>0.10) by rbTNFα treatment. Glucose turnover rate was unaffected (P = 0.18) by rbTNFα administration. The higher dose of rbTNFα tended to increase the risk of cows developing one or more health disorders (P = 0.08). Taken together, these results indicate that administration of rbTNFα daily for the first 7 days of lactation altered inflammatory responses, impaired milk production and health, but did not significantly affect liver triglyceride accumulation or nutrient metabolism in dairy cows. PMID:24260367

Factors affecting the transverse force measurements of an optical trap: I

Science.gov (United States)

Wood, Tiffany A.; Wright, Amanda; Gleeson, Helen F.; Dickenson, Mark; Mullin, Tom; Murray, Andrew

2002-03-01

The transverse force of an optical trap is usually measured by equating the trapping force to the viscous drag force applied to the trapped particle according to Stokes' Law. Under normal conditions, the viscous drag force on a trapped particle is proportional to the fluid velocity of the medium. In this paper we show that an increase of particle concentration within the medium affects force measurements. In order to trap the particle, 1064 nm light from a Nd:YVO4 laser was brought to a focus in a sample slide, of thickness around 380 microns, by using an inverted Zeiss microscope objective, with NA equals 1.3. The slide was filled with distilled water containing 6 micron diameter polystyrene spheres. Measurements were taken at a fluid velocity of 0.75 microns/sec, achieved by moving the sample stage with a piezo-electric transducer whilst a particle was held stationary in the trap. The laser power required to hold a sphere at different trap depths for various concentrations was measured. Significant weakening of the trap was found for concentrations >0.03% solids by weight, becoming weaker for higher trap depths. These results are explained in terms of aberrations, particle-particle interactions and distortion of the beam due to particle-light interactions.

Measuring positive and negative affect and physiological hyperarousal among Serbian youth.

Science.gov (United States)

Stevanovic, Dejan; Laurent, Jeff; Lakic, Aneta

2013-01-01

This study extended previous cross-cultural work regarding the tripartite model of anxiety and depression by developing Serbian translations of the Positive and Negative Affect Scale for Children (PANAS-C), the Physiological Hyperarousal Scale for Children (PH-C), and the Affect and Arousal Scale (AFARS). Characteristics of the scales were examined using 449 students (M age = 12.61 years). Applying item retention criteria established in other studies, PH-C, PANAS-C, and AFARS translations with psychometric properties similar to English-language versions were identified. Preliminary validation of the scales was conducted using a subset of 194 students (M age = 12.37 years) who also completed measures of anxiety and depression. Estimates of reliability, patterns of correlations among scales, and age and gender differences were consistent with previous studies with English-speaking samples. Findings regarding scale validity were mixed, although consistent with existing literature. Serbian translations of the PH-C, PANAS-C, and AFARS mirror the original English-language scales in terms of both strengths and weaknesses.

Production practices affecting worker task demands in concrete operations: A case study.

Science.gov (United States)

Memarian, Babak; Mitropoulos, Panagiotis

2015-01-01

Construction work involves significant physical, mental, and temporal task demands. Excessive task demands can have negative consequences for safety, errors and production. This exploratory study investigates the magnitude and sources of task demands on a concrete operation, and examines the effect of the production practices on the workers' task demands. The NASA Task Load Index was used to measure the perceived task demands of two work crews. The operation involved the construction of a cast-in-place concrete building under high schedule pressures. Interviews with each crew member were used to identify the main sources of the perceived demands. Extensive field observations and interviews with the supervisors and crews identified the production practices. The workers perceived different level of task demands depending on their role. The production practices influenced the task demands in two ways: (1) practices related to work organization, task design, resource management, and crew management mitigated the task demands; and (2) other practices related to work planning and crew management increased the crew's ability to cope with and adapt to high task demands. The findings identify production practices that regulate the workers' task demands. The effect of task demands on performance is mitigated by the ability to cope with high demands.

Femoral rotation unpredictably affects radiographic anatomical lateral distal femoral angle measurements

DEFF Research Database (Denmark)

Miles, James Edward

2016-01-01

Objective: To describe the effects of internal and external femoral rotation on radiographic measurements of the anatomical lateral distal femoral angle (a-LDFA) using two methods for defining the anatomical proximal femoral axis (a-PFA). Methods: Digital radiographs were obtained of 14 right...... femora at five degree intervals from 10° external rotation to 10° internal rotation. Using freely available software, a-LDFA measurements were made using two different a-PFA by a single observer on one occasion. Results: Mean a-LDFA was significantly greater at 10° external rotation than at any other...... rotation. The response of individual femora to rotation was unpredictable, although fairly stable within ±5° of zero rotation. Mean a-LDFA for the two a-PFA methods differed by 1.5°, but were otherwise similarly affected by femoral rotation. Clinical significance: If zero femoral elevation can be achieved...

Aggregate Multi-Factor Productivity: Measurement Issues in OECD Countries

OpenAIRE

Egert, Balazs

2018-01-01

This paper analyses for 34 OECD countries the extent to which the calculation of aggregate multi-factor productivity (MFP) is sensitive to alternative parameterisations. The starting point is the definition of MFP used in previous work in the OECD’s Economics Department (e.g. Johansson et al. 2013). They include alternative MFP measures, with human capital included or excluded, with different measures of Purchasing Power Parity (PPP) exchange rates, using time-varying capital depreciation rat...

Light scattering measurement of sodium polyacrylate products

Science.gov (United States)

Lama, Nisha; Norwood, David; Boone, Steven; Massie-Boyer, Valerie

2015-03-01

In the presentation, we will describe the use of a multi-detector HPLC incorporating the DAWN EOS multi-angle laser light scattering (MALLS) detector to measure the properties such as molecular weight, RMS radius, contour and persistence length and polydispersity of sodium polyacrylate products. The samples of sodium polyacrylate are used in various industries as thickening agents, coating dispersants, artificial snow, laundry detergent and disposable diapers. Data and results obtained from the experiment will be presented.

Integral measurement of fission products capture in fast breeder reactors

International Nuclear Information System (INIS)

Martin Deidier, Loick.

1979-12-01

For the SUPERPHENIX reactor project, it was necessary to know fission products capture with about 10% accuracy in the fast breeder reactor spectra. In this purpose, integral measurements have been carried out on the main separated products by different experimental technics (oscillation, activation and irradiation methods), but particularly on irradiated fuel pins from RAPSODIE and PHENIX reactors in order to directly obtain total effect of fission products. Same tendencies have been observed for both enriched uranium fuel and LMFBR characteristic plutonium fuel. All experimental results have been introduced in CARNAVAL cross section set [fr

Measurement of D*± meson production in deep-inelastic scattering at HERA

International Nuclear Information System (INIS)

Bachynska, Olena

2012-12-01

Measurements of charm production in deep-inelastic scattering at HERA at a centre-of-mass energy of 318 GeV are reported in this thesis. The analysis was performed using the data collected with the ZEUS detector during the years 2004 to 2007, corresponding to an integrated luminosity of 363 pb -1 . The production of charm quarks was studied through the full kinematic reconstruction of D* ± mesons in the decay channel D* ± → D 0 / anti D 0 π ± . The studies have been performed for virtualities of the exchanged photon of 5 2 2 and inelasticities of 0.02 ± kinematic phase space is defined by the transverse momentum range, 1.5 T D* ± D* ± vertical stroke ± mesons. The total visible cross section for D* ± production as well as single-and double-differential cross sections were measured and compared to the corresponding D* ± measurements performed by the H1 collaboration in the same phase-space region. The measurements are well described by NLO QCD predictions. The double-differential cross sections were exploited to extract the charm contribution to the proton structure function, F 2 c anti c , expressed in terms of the reduced charm-production cross sections, σ red c anti c , and compared to the predictions from HERAPDF1.5 and to the recent measurements from the H1 and ZEUS collaborations.

Critical Factors Affecting the Success of Cloning, Expression, and Mass Production of Enzymes by Recombinant E. coli.

Science.gov (United States)

Fakruddin, Md; Mohammad Mazumdar, Reaz; Bin Mannan, Khanjada Shahnewaj; Chowdhury, Abhijit; Hossain, Md Nur

2013-01-01

E. coli is the most frequently used host for production of enzymes and other proteins by recombinant DNA technology. E. coli is preferable for its relative simplicity, inexpensive and fast high-density cultivation, well-known genetics, and large number of compatible molecular tools available. Despite all these advantages, expression and production of recombinant enzymes are not always successful and often result in insoluble and nonfunctional proteins. There are many factors that affect the success of cloning, expression, and mass production of enzymes by recombinant E. coli. In this paper, these critical factors and approaches to overcome these obstacles are summarized focusing controlled expression of target protein/enzyme in an unmodified form at industrial level.

New approaches to the measurement of chlorophyll, related pigments and productivity in the sea

Science.gov (United States)

Booth, C. R.; Keifer, D. A.

1989-01-01

In the 1984 SBIR Call for Proposals, NASA solicited new methods to measure primary production and chlorophyll in the ocean. Biospherical Instruments Inc. responded to this call with a proposal first to study a variety of approaches to this problem. A second phase of research was then funded to pursue instrumentation to measure the sunlight stimulated naturally occurring fluorescence of chlorophyll in marine phytoplankton. The monitoring of global productivity, global fisheries resources, application of above surface-to-underwater optical communications systems, submarine detection applications, correlation, and calibration of remote sensing systems are but some of the reasons for developing inexpensive sensors to measure chlorophyll and productivity. Normally, productivity measurements are manpower and cost intensive and, with the exception of a very few expensive multiship research experiments, provide no contemporaneous data. We feel that the patented, simple sensors that we have designed will provide a cost effective method for large scale, synoptic, optical measurements in the ocean. This document is the final project report for a NASA sponsored SBIR Phase 2 effort to develop new methods for the measurements of primary production in the ocean. This project has been successfully completed, a U.S. patent was issued covering the methodology and sensors, and the first production run of instrumentation developed under this contract has sold out and been delivered.

Quarkonia production in small and large systems measured by ATLAS

CERN Document Server

Lopez, Jorge; The ATLAS collaboration

2018-01-01

The experimentally observed dissociation and regeneration of bound quarkonium states in heavy-ion collisions provide a powerful tool to probe the dynamics of the hot, dense plasma. These measurements are sensitive to the effects of color screening, color recombination, or other, new suppression mechanisms. In the large-statistics Run 2 lead-lead and proton-lead collision data, these phenomena can be probed with unprecedented precision. Measurements of the ground and excited quarkonia states, as well as their separation into prompt and non-prompt components, provide further opportunities to study the dynamics of heavy parton energy loss in these large systems. In addition, quarkonium production rates, and their excited to ground states ratios, in small, asymmetric systems are an interesting probe of cold nuclear matter effects. In this talk, the latest ATLAS results on quarkonia production will be presented, including new, differential measurements of charmonium suppression and azimuthal modulation in lead-lea...

Measurement of isolated photon production in deep-inelastic scattering at HERA

International Nuclear Information System (INIS)

Aaron, F.D.; Alexa, C.

2007-10-01

The production of isolated photons in deep-inelastic scattering ep → eγX is measured with the H1 detector at HERA. The measurement is performed in the kinematic range of negative four-momentum transfer squared 4 2 2 and a mass of the hadronic system W X >50 GeV. The analysis is based on a total integrated luminosity of 227 pb -1 . The production cross section of isolated photons with a transverse energy in the range 3 γ T γ γ T , η γ and Q 2 . Isolated photon cross sections are also measured for events with no jets or at least one hadronic jet. The measurements are compared with predictions from Monte Carlo generators modelling the photon radiation from the quark and the electron lines, as well as with calculations at leading and next to leading order in the strong coupling. The predictions significantly underestimate the measured cross sections. (orig.)

Technical note: Consistent calculation of aquatic gross production from oxygen triple isotope measurements

Directory of Open Access Journals (Sweden)

J. Kaiser

2011-07-01

Full Text Available Oxygen triple isotope measurements can be used to calculate aquatic gross oxygen production rates. Past studies have emphasised the appropriate definition of the ¹⁷O excess and often used an approximation to derive production rates from the ¹⁷O excess. Here, I show that the calculation can be phrased more consistently and without any approximations using the relative ¹⁷O/¹⁶O and ¹⁸O/¹⁶O isotope ratio differences (delta values directly. I call this the "dual delta method". The ¹⁷O excess is merely a mathematical construct and the derived production rate is independent of its definition, provided all calculations are performed with a consistent definition. I focus on the mixed layer, but also show how time series of triple isotope measurements below the mixed layer can be used to derive gross production.

In the calculation of mixed layer productivity, I explicitly include isotopic fractionation during gas invasion and evasion, which requires the oxygen supersaturation s to be measured as well. I also suggest how bubble injection could be considered in the same mathematical framework. I distinguish between concentration steady state and isotopic steady state and show that only the latter needs to be assumed in the calculation. It is even possible to derive an estimate of the net production rate in the mixed layer that is independent of the assumption of concentration steady state.

I review measurements of the parameters required for the calculation of gross production rates and show how their systematic uncertainties as well as the use of different published calculation methods can cause large variations in the production rates for the same underlying isotope ratios. In particular, the ¹⁷O excess of dissolved O₂ in equilibrium with atmospheric O₂ and the ¹⁷O excess of photosynthetic O₂ need to

Malmquist Index, an Alternative Technique for Measuring Credit Institutions Productivity

Directory of Open Access Journals (Sweden)

Nicolae Dardac

2008-03-01

Full Text Available The present study tackles the banking system’s productivity in a more complex manner, that integrates multiple input, multiple output variables, abdicating from the reductionist perspective of clasical methods, which imposed limits in the number of variables, in the process of productivity measurement and interpretation. The advantage of Malmquist productivity indexes consists both in a quantitative evaluation of the global productivity of a credit institution over a specified period of time, and in the decomposition of productivity, in order to underline how much of its change is due to the catch-up effect, and, respectively, to the implementation of new technologies. The results obtained revealed that credit institutions placed on the first three places in the banking system, according to assets value, maintained constant their productivity level during the analysed period, meanwhile the other institutions in our sample registered a slowly improvement in productivity, determined, mainly, by technological changes.

QCD aspects of diboson production based on measurements of the ATLAS detector

CERN Document Server

Dutta, Baishali; The ATLAS collaboration

2017-01-01

The production of diboson states with jets in the final state received significant attention since next-to-next-to leading order calculations became available. In this talk, we present measurements of WZ and ZZ dibosons final states, with a special focus on their production in association with jets. Several differential distributions have been measured for the first time and are compared to the state-of-the art theory predictions.

How does fair value measurement under IAS 39 affect disclosure choices of European banks?

OpenAIRE

Bischof, Jannis; Wüstemann, Jens

2007-01-01

There is a considerable degree of heterogeneity in the way how European banks present their financial instruments in IFRS financial statements. In a sample of 109 European banks, we identify three major presentation formats that are currently applied: a presentation by measurement category, by product, and by purpose. We find the use of the measurement categories, which were originally designed by IAS 39 for measurement purposes, as line items to be the prevalent choice across countries. We a...

Enterprise performance measurement systems

Directory of Open Access Journals (Sweden)

Milija Bogavac

2014-10-01

Full Text Available Performance measurement systems are an extremely important part of the control and management actions, because in this way a company can determine its business potential, its market power, potential and current level of business efficiency. The significance of measurement consists in influencing the relationship between the results of reproduction (total volume of production, value of production, total revenue and profit and investments to achieve these results (factors of production spending and hiring capital in order to achieve the highest possible quality of the economy. (The relationship between the results of reproduction and investment to achieve them quantitatively determines economic success as the quality of the economy. Measuring performance allows the identification of the economic resources the company has, so looking at the key factors that affect its performance can help to determine the appropriate course of action.

Production competence revisited:a critique of the literature and a new measurement approach

OpenAIRE

Szász, Levente; Demeter, Krisztina; Boer, Harry

2015-01-01

Purpose – The purpose of this paper is to seek remedy to two major flaws of the production competence literature, which concern: the way the production competence construct is operationalized and the way its effects on performance are measured.Design/methodology/approach – The paper proposes to measure production competence as the two-dimensional operational level construct it actually is, and to use Slack’s (1994) importance performance matrix to study its business level performance effects....

The Affective Slider: A Digital Self-Assessment Scale for the Measurement of Human Emotions.

Science.gov (United States)

Betella, Alberto; Verschure, Paul F M J

2016-01-01

Self-assessment methods are broadly employed in emotion research for the collection of subjective affective ratings. The Self-Assessment Manikin (SAM), a pictorial scale developed in the eighties for the measurement of pleasure, arousal, and dominance, is still among the most popular self-reporting tools, despite having been conceived upon design principles which are today obsolete. By leveraging on state-of-the-art user interfaces and metacommunicative pictorial representations, we developed the Affective Slider (AS), a digital self-reporting tool composed of two slider controls for the quick assessment of pleasure and arousal. To empirically validate the AS, we conducted a systematic comparison between AS and SAM in a task involving the emotional assessment of a series of images taken from the International Affective Picture System (IAPS), a database composed of pictures representing a wide range of semantic categories often used as a benchmark in psychological studies. Our results show that the AS is equivalent to SAM in the self-assessment of pleasure and arousal, with two added advantages: the AS does not require written instructions and it can be easily reproduced in latest-generation digital devices, including smartphones and tablets. Moreover, we compared new and normative IAPS ratings and found a general drop in reported arousal of pictorial stimuli. Not only do our results demonstrate that legacy scales for the self-report of affect can be replaced with new measurement tools developed in accordance to modern design principles, but also that standardized sets of stimuli which are widely adopted in research on human emotion are not as effective as they were in the past due to a general desensitization towards highly arousing content.

The Affective Slider: A Digital Self-Assessment Scale for the Measurement of Human Emotions.

Directory of Open Access Journals (Sweden)

Alberto Betella

Full Text Available Self-assessment methods are broadly employed in emotion research for the collection of subjective affective ratings. The Self-Assessment Manikin (SAM, a pictorial scale developed in the eighties for the measurement of pleasure, arousal, and dominance, is still among the most popular self-reporting tools, despite having been conceived upon design principles which are today obsolete. By leveraging on state-of-the-art user interfaces and metacommunicative pictorial representations, we developed the Affective Slider (AS, a digital self-reporting tool composed of two slider controls for the quick assessment of pleasure and arousal. To empirically validate the AS, we conducted a systematic comparison between AS and SAM in a task involving the emotional assessment of a series of images taken from the International Affective Picture System (IAPS, a database composed of pictures representing a wide range of semantic categories often used as a benchmark in psychological studies. Our results show that the AS is equivalent to SAM in the self-assessment of pleasure and arousal, with two added advantages: the AS does not require written instructions and it can be easily reproduced in latest-generation digital devices, including smartphones and tablets. Moreover, we compared new and normative IAPS ratings and found a general drop in reported arousal of pictorial stimuli. Not only do our results demonstrate that legacy scales for the self-report of affect can be replaced with new measurement tools developed in accordance to modern design principles, but also that standardized sets of stimuli which are widely adopted in research on human emotion are not as effective as they were in the past due to a general desensitization towards highly arousing content.

Logopenic and nonfluent variants of primary progressive aphasia are differentiated by acoustic measures of speech production.

Directory of Open Access Journals (Sweden)

Kirrie J Ballard

Full Text Available Differentiation of logopenic (lvPPA and nonfluent/agrammatic (nfvPPA variants of Primary Progressive Aphasia is important yet remains challenging since it hinges on expert based evaluation of speech and language production. In this study acoustic measures of speech in conjunction with voxel-based morphometry were used to determine the success of the measures as an adjunct to diagnosis and to explore the neural basis of apraxia of speech in nfvPPA. Forty-one patients (21 lvPPA, 20 nfvPPA were recruited from a consecutive sample with suspected frontotemporal dementia. Patients were diagnosed using the current gold-standard of expert perceptual judgment, based on presence/absence of particular speech features during speaking tasks. Seventeen healthy age-matched adults served as controls. MRI scans were available for 11 control and 37 PPA cases; 23 of the PPA cases underwent amyloid ligand PET imaging. Measures, corresponding to perceptual features of apraxia of speech, were periods of silence during reading and relative vowel duration and intensity in polysyllable word repetition. Discriminant function analyses revealed that a measure of relative vowel duration differentiated nfvPPA cases from both control and lvPPA cases (r(2 = 0.47 with 88% agreement with expert judgment of presence of apraxia of speech in nfvPPA cases. VBM analysis showed that relative vowel duration covaried with grey matter intensity in areas critical for speech motor planning and programming: precentral gyrus, supplementary motor area and inferior frontal gyrus bilaterally, only affected in the nfvPPA group. This bilateral involvement of frontal speech networks in nfvPPA potentially affects access to compensatory mechanisms involving right hemisphere homologues. Measures of silences during reading also discriminated the PPA and control groups, but did not increase predictive accuracy. Findings suggest that a measure of relative vowel duration from of a polysyllable word

Lighting Quality Affects Eyestrain of Operators at Sorting Station in Beverage Industry

Science.gov (United States)

Anizar; Erwin

2017-03-01

This study observes sorters’ performance in two beverage industries whose job is to separate defect products found. Sorters observe bottles quality and beverage quality continuously, therefore requiring more focused eyes which makes eyes’ load heavier. Sorters’ eyestrain causes more defect products pass the selection. In this study, measurement is conducted toward ilumintation, operators’ time response, and defect products that pass the selection. Measurement is hold in 2 beverage industries for four days with four measurements per day, twice in the morning and twice in the afternoon. Ilumination is measured with 4 in 1 environmental meter in grid 1m x 1m, while operators’ time response is measured with Flicker Fusion. Illuminance is generally higher in the morning than in the evening, but still under the standard of Indonesia. Overall, sorters’ time response is higher in the morning than in the afternoon. Higher time response shows that operators experiencing lower fatigue than lower time response. The sorting duration also affects operators’ time response and defect products which pass the selection.

The Benefish consortium 24 month report WP6: productivity modelling of OWI's and welfare intervention measures

NARCIS (Netherlands)

Schneider, O.; Schram, E.; Noble, C.

2009-01-01

In order to accurately model all costs and benefits associated with welfare interventions for farmed fish it is necessary to establish how any welfare actions affect productivity. Productivity modelling within Benefish has been conducted in WP6. WP6 aimed to model relationships between welfare

Optical measurements of atomic oxygen concentration, temperature and nitric oxide production rate in flames

Science.gov (United States)

Myhr, Franklin Henry

An optical method for measuring nitric oxide (NO) production rates in flames was developed and characterized in a series of steady, one-dimensional, atmospheric-pressure laminar flames of 0.700 Hsb2/0.199 Nsb2/0.101 COsb2 or 0.700 CHsb4/0.300 Nsb2 (by moles) with dry air, with equivalence ratios from 0.79 to 1.27. Oxygen atom concentration, (O), was measured by two-photon laser-induced fluorescence (LIF), temperature was measured by ultraviolet Rayleigh scattering, and nitrogen concentration was calculated from supplied reactant flows; together this information was used to calculate the NO production rate through the thermal (Zel'dovich) mechanism. Measurements by two other techniques were compared with results from the above method. In the first comparison, gas sampling was used to measure axial NO concentration profiles, the slopes of which were multiplied by velocity to obtain total NO production rates. In the second comparison, LIF measurements of hydroxyl radical (OH) were used with equilibrium water concentrations and a partial equilibrium assumption to find (O). Nitric oxide production rates from all three methods agreed reasonably well. Photolytic interference was observed during (O) LIF measurements in all of the flames; this is the major difficulty in applying the optical technique. Photolysis of molecular oxygen in lean flames has been well documented before, but the degree of interference observed in the rich flames suggests that some other molecule is also dissociating; the candidates are OH, CO, COsb2 and Hsb2O. An extrapolative technique for removing the effects of photolysis from (O) LIF measurements worked well in all flames where NO production was significant. Using the optical method to measure NO production rates in turbulent flames will involve a tradeoff among spatial resolution, systematic photolysis error, and random shot noise. With the conventional laser system used in this work, a single pulse with a resolution of 700 mum measured NO

Measurement of $\\Delta^{++}$(1232) production in hadronic Z decays

CERN Document Server

Abreu, P; Adye, T; Agasi, E; Ajinenko, I; Aleksan, Roy; Alekseev, G D; Allport, P P; Almehed, S; Alvsvaag, S J; Amaldi, Ugo; Amato, S; Andreazza, A; Andrieux, M L; Antilogus, P; Anykeyev, V B; Apel, W D; Arnoud, Y; Åsman, B; Augustin, J E; Augustinus, A; Baillon, Paul; Bambade, P; Barão, F; Barate, R; Bardin, Dimitri Yuri; Barker, G J; Baroncelli, A; Bärring, O; Barrio, J A; Bartl, Walter; Bates, M J; Battaglia, Marco; Baubillier, M; Baudot, J; Becks, K H; Begalli, M; Beillière, P; Belokopytov, Yu A; Benvenuti, Alberto C; Berggren, M; Bertrand, D; Bianchi, F; Bigi, M; Bilenky, S M; Billoir, P; Bloch, D; Blume, M; Blyth, S; Bocci, V; Bolognese, T; Bonesini, M; Bonivento, W; Booth, P S L; Borisov, G; Bosio, C; Bosworth, S; Botner, O; Bouquet, B; Bourdarios, C; Bowcock, T J V; Bozzo, M; Branchini, P; Brand, K D; Brenke, T; Brenner, R A; Bricman, C; Brillault, L; Brown, R C A; Brückman, P; Brunet, J M; Bugge, L; Buran, T; Burgsmüller, T; Buschmann, P; Buys, A; Caccia, M; Calvi, M; Camacho-Rozas, A J; Camporesi, T; Canale, V; Canepa, M; Cankocak, K; Cao, F; Carena, F; Carrilho, P; Carroll, L; Caso, Carlo; Castillo-Gimenez, M V; Cattai, A; Cavallo, F R; Cerrito, L; Chabaud, V; Charpentier, P; Chaussard, L; Chauveau, J; Checchia, P; Chelkov, G A; Chierici, R; Chliapnikov, P V; Chochula, P; Chorowicz, V; Cindro, V; Collins, P; Contreras, J L; Contri, R; Cortina, E; Cosme, G; Cossutti, F; Crawley, H B; Crennell, D J; Crosetti, G; Cuevas-Maestro, J; Czellar, S; Dahl-Jensen, Erik; Dahm, J; D'Almagne, B; Dam, M; Damgaard, G; Daum, A; Dauncey, P D; Davenport, Martyn; Da Silva, W; Defoix, C; Della Ricca, G; Delpierre, P A; Demaria, N; De Angelis, A; De Boeck, H; de Boer, Wim; De Brabandere, S; De Clercq, C; La Vaissière, C de; De Lotto, B; De Min, A; De Paula, L S; De Saint-Jean, C; Dijkstra, H; Di Ciaccio, Lucia; Djama, F; Dolbeau, J; Dönszelmann, M; Doroba, K; Dracos, M; Drees, J; Drees, K A; Dris, M; Dufour, Y; Dupont, F; Edsall, D M; Ehret, R; Eigen, G; Ekelöf, T J C; Ekspong, Gösta; Elsing, M; Engel, J P; Ershaidat, N; Erzen, B; Espirito-Santo, M C; Falk, E; Fassouliotis, D; Feindt, Michael; Ferrer, A; Filippas-Tassos, A; Firestone, A; Fischer, P A; Föth, H; Fokitis, E; Fontanelli, F; Formenti, F; Franek, B J; Frenkiel, P; Fries, D E C; Frodesen, A G; Frühwirth, R; Fulda-Quenzer, F; Fuster, J A; Galloni, A; Gamba, D; Gandelman, M; García, C; García, J; Gaspar, C; Gasparini, U; Gavillet, P; Gazis, E N; Gelé, D; Gerber, J P; Gibbs, M; Gokieli, R; Golob, B; Gopal, Gian P; Gorn, L; Górski, M; Guz, Yu; Gracco, Valerio; Graziani, E; Grosdidier, G; Gunnarsson, P; Günther, M; Guy, J; Haedinger, U; Hahn, F; Hahn, M; Hahn, S; Hajduk, Z; Hallgren, A; Hamacher, K; Hao, W; Harris, F J; Hedberg, V; Henriques, R P; Hernández, J J; Herquet, P; Herr, H; Hessing, T L; Higón, E; Hilke, Hans Jürgen; Hill, T S; Holmgren, S O; Holt, P J; Holthuizen, D J; Houlden, M A; Hrubec, Josef; Huet, K; Hultqvist, K; Ioannou, P; Jackson, J N; Jacobsson, R; Jalocha, P; Janik, R; Jarlskog, G; Jarry, P; Jean-Marie, B; Johansson, E K; Jönsson, L B; Jönsson, P E; Joram, Christian; Juillot, P; Kaiser, M; Kapusta, F; Karlsson, M; Karvelas, E; Katsanevas, S; Katsoufis, E C; Keränen, R; Khomenko, B A; Khovanskii, N N; King, B J; Kjaer, N J; Klein, H; Klovning, A; Kluit, P M; Köhne, J H; Köne, B; Kokkinias, P; Koratzinos, M; Kostyukhin, V; Kourkoumelis, C; Kuznetsov, O; Kramer, P H; Krammer, Manfred; Kreuter, C; Królikowski, J; Kronkvist, I J; Krumshtein, Z; Krupinski, W; Kubinec, P; Kucewicz, W; Kurvinen, K L; Lacasta, C; Laktineh, I; Lamblot, S; Lamsa, J; Lanceri, L; Lane, D W; Langefeld, P; Lapin, V; Last, I; Laugier, J P; Lauhakangas, R; Leder, Gerhard; Ledroit, F; Lefébure, V; Legan, C K; Leitner, R; Lemoigne, Y; Lemonne, J; Lenzen, Georg; Lepeltier, V; Lesiak, T; Liko, D; Lindner, R; Lipniacka, A; Lippi, I; Lörstad, B; Lokajícek, M; Loken, J G; López, J M; López-Fernandez, A; López-Aguera, M A; Loukas, D; Lutz, P; Lyons, L; Maehlum, G; Maio, A; Malychev, V; Mandl, F; Marco, J; Maréchal, B; Margoni, M; Marin, J C; Mariotti, C; Markou, A; Maron, T; Martínez-Rivero, C; Martínez-Vidal, F; Martí i García, S; Matorras, F; Matteuzzi, C; Matthiae, Giorgio; Mazzucato, M; McCubbin, M L; McKay, R; McNulty, R; Medbo, J; Meroni, C; Meyer, W T; Michelotto, M; Migliore, E; Mirabito, L; Mitaroff, Winfried A; Mjörnmark, U; Moa, T; Møller, R; Mönig, K; Monge, M R; Morettini, P; Müller, H; Mundim, L M; Murray, W J; Muryn, B; Myatt, Gerald; Naraghi, F; Navarria, Francesco Luigi; Navas, S; Negri, P; Némécek, S; Neumann, W; Neumeister, N; Nicolaidou, R; Nielsen, B S; Nieuwenhuizen, M; Nikolaenko, V; Niss, P; Nomerotski, A; Normand, Ainsley; Oberschulte-Beckmann, W; Obraztsov, V F; Olshevskii, A G; Onofre, A; Orava, Risto; Österberg, K; Ouraou, A; Paganini, P; Paganoni, M; Pagès, P; Palka, H; Papadopoulou, T D; Pape, L; Parkes, C; Parodi, F; Passeri, A; Pegoraro, M; Pernegger, H; Pernicka, Manfred; Perrotta, A; Petridou, C; Petrolini, A; Phillips, H T; Piana, G; Pierre, F; Pimenta, M; Pindo, M; Plaszczynski, S; Podobrin, O; Pol, M E; Polok, G; Poropat, P; Pozdnyakov, V; Prest, M; Privitera, P; Pukhaeva, N; Pullia, Antonio; Radojicic, D; Ragazzi, S; Rahmani, H; Rames, J; Ratoff, P N; Read, A L; Reale, M; Rebecchi, P; Redaelli, N G; Regler, Meinhard; Reid, D; Renton, P B; Resvanis, L K; Richard, F; Richardson, J; Rídky, J; Rinaudo, G; Ripp, I; Romero, A; Roncagliolo, I; Ronchese, P; Roos, L; Rosenberg, E I; Rosso, E; Roudeau, Patrick; Rovelli, T; Rückstuhl, W; Ruhlmann-Kleider, V; Ruiz, A; Rybicki, K; Rybin, A; Saarikko, H; Sacquin, Yu; Sadovskii, A; Sajot, G; Salt, J; Sánchez, J; Sannino, M; Schneider, H; Schyns, M A E; Sciolla, G; Scuri, F; Seager, P; Sedykh, Yu; Segar, A M; Seitz, A; Sekulin, R L; Shellard, R C; Siccama, I; Siegrist, P; Simonetti, S; Simonetto, F; Sissakian, A N; Sitár, B; Skaali, T B; Smadja, G; Smirnova, O G; Smith, G R; Sosnowski, R; Souza-Santos, D; Spassoff, Tz; Spiriti, E; Sponholz, P; Squarcia, S; Stanescu, C; Stapnes, Steinar; Stavitski, I; Stepaniak, K; Stichelbaut, F; Stocchi, A; Strauss, J; Strub, R; Stugu, B; Szczekowski, M; Szeptycka, M; Tabarelli de Fatis, T; Tavernet, J P; Chikilev, O G; Tilquin, A; Timmermans, J; Tkatchev, L G; Todorov, T; Toet, D Z; Tomaradze, A G; Tomé, B; Tortora, L; Tranströmer, G; Treille, D; Trischuk, W; Tristram, G; Trombini, A; Troncon, C; Tsirou, A L; Turluer, M L; Tyapkin, I A; Tyndel, M; Tzamarias, S; Überschär, B; Ullaland, O; Uvarov, V; Valenti, G; Vallazza, E; Van der Velde, C; van Apeldoorn, G W; van Dam, P; Van Doninck, W K; Van Eldik, J; Vassilopoulos, N; Vegni, G; Ventura, L; Venus, W A; Verbeure, F; Verlato, M; Vertogradov, L S; Vilanova, D; Vincent, P; Vitale, L; Vlasov, E; Vodopyanov, A S; Vrba, V; Wahlen, H; Walck, C; Waldner, F; Weierstall, M; Weilhammer, Peter; Wetherell, Alan M; Wicke, D; Wickens, J H; Wielers, M; Wilkinson, G R; Williams, W S C; Winter, M; Witek, M; Woschnagg, K; Yip, K; Yushchenko, O P; Zach, F; Zacharatou-Jarlskog, C; Zaitsev, A; Zalewska-Bak, A; Zalewski, Piotr; Zavrtanik, D; Zevgolatakos, E; Zhigunov, V P; Zimin, N I; Zito, M; Zontar, D; Zuberi, R; Zucchelli, G C; Zumerle, G

1995-01-01

A measurement of the \\Delta^{++}(1232) inclusive production in hadronic decays of the Z at LEP is presented, based on 1.3 million hadronic events collected~ by the DELPHI~ detector in the 1994 LEP running~ period. The DELPHI ring imaging Cherenkov counters are used for identifying hadrons. The average \\Delta^{++}(1232) multiplicity per hadronic event is 0.079 \\pm 0.015 which is more than a factor of two below the JETSET, HERWIG and UCLA model predictions. It agrees with a recently proposed universal mass dependence of particle production rates in e^{+}e^- annihilations.

Effects of information technology on dairy farms in The Netherlands: an empirical analysis of milk production records.

Science.gov (United States)

Van Asseldonk, M A; Huirne, R B; Dijkhuizen, A A; Tomaszewski, M A; Harbers, A G

1998-10-01

This study empirically quantified the effects of the adoption of an automated concentrate feeder, on-line measurement of milk production, and activity measurement on milk production and reproduction. The data comprised annual results of Dutch farms operating in a milk quota system from 1987 to 1996; data included both adopters and nonadopters as well as farm results before and after adoption. The use of an automated concentrate feeder improved the annual carrier production of milk, milk protein, and milk fat (102, 4.95, and 5.52 kg per cow, respectively). In contrast, on-line measurement of milk production did not significantly affect milk production records. Calving interval was shortened by 5.7 d after the adoption of an activity measurement system but was not affected by the adoption of an automated concentrate feeder or by the measurement of on-line milk production.

Cost-effectiveness of ergonomic interventions in production

NARCIS (Netherlands)

Looze, M.P. de; Koningsveld, E.P.A.; Fritzsche, L.; O'Sullivan, L.; Levizzari, A.

2008-01-01

Ergonomic measures to reduce or eliminate the risks for developing musculoskeletal disorders, usually affects the performance at work as well, e.g. productivity or quality. The costs and benefits that can be associated with ergonomic measures are highly diverse in nature. Prior to investing in any

Mood swings: design and evaluation of affective interactive art

NARCIS (Netherlands)

Bialoskorski, Leticia S.S.; Westerink, Joyce H.D.M.; van den Broek, Egon

2009-01-01

The field of affective computing is concerned with developing emphatic products, such as affective consumer products, affective games, and affective art. This paper describes Mood Swings, an affective interactive art system, which interprets and visualizes affect expressed by a person. Mood Swings

Measurement of open beauty production at HERA in the D{sup *}{mu} final state

Energy Technology Data Exchange (ETDEWEB)

Chekanov, S.; Derrick, M.; Magill, S. [Argonne National Laboratory, IL (US)] (and others)

2006-09-15

The production of beauty quarks with a D{sup *{+-}} and a muon in the final state has been measured with the ZEUS detector at HERA using an integrated luminosity of 114 pb{sup -1}. Low transverse-momentum thresholds for the muon and D{sup *} meson allow a measurement of beauty production closer to the production threshold than previous measurements. The beauty signal was extracted using the charge correlations and angular distributions of the muon with respect to the D{sup *} meson. Cross sections for photoproduction and deep inelastic scattering are somewhat higher than, but compatible with, next-to-leading-order QCD predictions, and compatible with other measurements. (orig.)

Measuring biodegradation of oil products by means of environmental forensic methods

International Nuclear Information System (INIS)

Gallego, J. R.; Garcia-Mtnez, M. J.; Ortiz, J. E.; Ortega, M.; Torres, T. de; Llamas, J. F.

2009-01-01

Bioremediation technologies are focused to the biodegradation of organic pollutants. This approach is particularly helpful when soils and/or groundwater are affected by oil products spills, given the satisfactory biodegradability of most hydrocarbons. However, during a bio-treatment the decreasing in pollutants concentration may be due to both biotic and biotic processes, whose distinction is very important, albeit difficult, in order to evaluate if bioremediation is being properly applied. (Author)

Measurement of Electroweak Top Quark Production at {D\\O}

Energy Technology Data Exchange (ETDEWEB)

Tsai, Yun-Tse [Univ. of Rochester, NY (United States)

2013-01-01

We present a new model-independent measurement of the electroweak single top-quark production cross section in proton-antiproton (p- $\\bar{p}$) collisions at √s = 1.96 TeV in 9.7 fb^-1 of integrated luminosity collected with the DØ detector.

Ultrasonic Vocalizations as a Measure of Affect in Preclinical Models of Drug Abuse: A Review of Current Findings.

Science.gov (United States)

Barker, David J; Simmons, Steven J; West, Mark O

2015-01-01

The present review describes ways in which ultrasonic vocalizations (USVs) have been used in studies of substance abuse. Accordingly, studies are reviewed which demonstrate roles for affective processing in response to the presentation of drug-related cues, experimenter- and self-administered drug, drug withdrawal, and during tests of relapse/reinstatement. The review focuses on data collected from studies using cocaine and amphetamine, where a large body of evidence has been collected. Data suggest that USVs capture animals' initial positive reactions to psychostimulant administration and are capable of identifying individual differences in affective responding. Moreover, USVs have been used to demonstrate that positive affect becomes sensitized to psychostimulants over acute exposure before eventually exhibiting signs of tolerance. In the drug-dependent animal, a mixture of USVs suggesting positive and negative affect is observed, illustrating mixed responses to psychostimulants. This mixture is predominantly characterized by an initial bout of positive affect followed by an opponent negative emotional state, mirroring affective responses observed in human addicts. During drug withdrawal, USVs demonstrate the presence of negative affective withdrawal symptoms. Finally, it has been shown that drug-paired cues produce a learned, positive anticipatory response during training, and that presentation of drug-paired cues following abstinence produces both positive affect and reinstatement behavior. Thus, USVs are a useful tool for obtaining an objective measurement of affective states in animal models of substance abuse and can increase the information extracted from drug administration studies. USVs enable detection of subtle differences in a behavioral response that might otherwise be missed using traditional measures.

New CMS measurements of Higgs boson production and decay properties

CERN Multimedia

CERN. Geneva

2018-01-01

Combined measurements of the Higgs boson production and decay rates, as well its couplings to vector bosons and fermions, are presented. The analyses are based on the LHC proton-proton collision dataset recorded by the CMS detector at 13 TeV. The combination is based on the analysis of all the production processes gluon fusion, vector boson fusion and production with a W or a Z boson or a pair of top quarks, and of the H→ZZ, WW, γγ, ττ, bb, and μμ decay modes. Dedicated searches for invisible Higgs boson decays are also considered.

Surveillance indicators for potential reduced exposure products (PREPs: developing survey items to measure awareness

Directory of Open Access Journals (Sweden)

McNeill Ann

2009-10-01

Full Text Available Abstract Background Over the past decade, tobacco companies have introduced cigarettes and smokeless tobacco products (known as Potential Reduced Exposure Products, PREPs with purportedly lower levels of some toxins than conventional cigarettes and smokeless products. It is essential that public health agencies monitor awareness, interest, use, and perceptions of these products so that their impact on population health can be detected at the earliest stages. Methods This paper reviews and critiques existing strategies for measuring awareness of PREPs from 16 published and unpublished studies. From these measures, we developed new surveillance items and subjected them to two rounds of cognitive testing, a common and accepted method for evaluating questionnaire wording. Results Our review suggests that high levels of awareness of PREPs reported in some studies are likely to be inaccurate. Two likely sources of inaccuracy in awareness measures were identified: 1 the tendency of respondents to misclassify "no additive" and "natural" cigarettes as PREPs and 2 the tendency of respondents to mistakenly report awareness as a result of confusion between PREPs brands and similarly named familiar products, for example, Eclipse chewing gum and Accord automobiles. Conclusion After evaluating new measures with cognitive interviews, we conclude that as of winter 2006, awareness of reduced exposure products among U.S. smokers was likely to be between 1% and 8%, with the higher estimates for some products occurring in test markets. Recommended measurement strategies for future surveys are presented.

Surveillance indicators for potential reduced exposure products (PREPs): developing survey items to measure awareness

Science.gov (United States)

Bogen, Karen; Biener, Lois; Garrett, Catherine A; Allen, Jane; Cummings, K Michael; Hartman, Anne; Marcus, Stephen; McNeill, Ann; O'Connor, Richard J; Parascandola, Mark; Pederson, Linda

2009-01-01

Background Over the past decade, tobacco companies have introduced cigarettes and smokeless tobacco products (known as Potential Reduced Exposure Products, PREPs) with purportedly lower levels of some toxins than conventional cigarettes and smokeless products. It is essential that public health agencies monitor awareness, interest, use, and perceptions of these products so that their impact on population health can be detected at the earliest stages. Methods This paper reviews and critiques existing strategies for measuring awareness of PREPs from 16 published and unpublished studies. From these measures, we developed new surveillance items and subjected them to two rounds of cognitive testing, a common and accepted method for evaluating questionnaire wording. Results Our review suggests that high levels of awareness of PREPs reported in some studies are likely to be inaccurate. Two likely sources of inaccuracy in awareness measures were identified: 1) the tendency of respondents to misclassify "no additive" and "natural" cigarettes as PREPs and 2) the tendency of respondents to mistakenly report awareness as a result of confusion between PREPs brands and similarly named familiar products, for example, Eclipse chewing gum and Accord automobiles. Conclusion After evaluating new measures with cognitive interviews, we conclude that as of winter 2006, awareness of reduced exposure products among U.S. smokers was likely to be between 1% and 8%, with the higher estimates for some products occurring in test markets. Recommended measurement strategies for future surveys are presented. PMID:19840394

A New Approach to Measuring the Gap between Marginal Productivity and Wages of Workers

OpenAIRE

KODAMA Naomi; ODAKI Kazuhiko

2012-01-01

The idea that the productivity and wages of workers are not necessarily equal has long attracted the attention of many economists. Indeed, the lack of a method to measure the productivity-wage gap has hindered the development of research on labor economics, productivity analysis, and human capital study. This paper proposes a new empirical method to measure the gap between the value of a worker's marginal product (VMP) and wage. We first define this gap. The method then aggregates the Mincer-...

Towards improving construction labor productivity and projects’ performance

OpenAIRE

Mostafa E. Shehata; Khaled M. El-Gohary

2011-01-01

Proper management of resources in construction projects can yield substantial savings in time and cost. As construction is a labor-intensive industry, this paper focuses on labor productivity in the construction industry. This study considers the current state-of-the-art issues relevant to this subject. It covers the construction labor productivity definitions, aspects, measurements, factors affecting it, different techniques used for measuring it and modeling techniques. The main outcome fro...

Some factors including radiation affecting the productivity of proteinase enzymes by mucor lamprosporus

International Nuclear Information System (INIS)

El-Kabbany, H.M.I.

1996-01-01

In the present time, great attention has been focused on the production of milk clotting enzymes from microbial source for use as remain substitute due to the increasing demands on rennin for cheese making and the prohibition of the slaughter of small calves. The present investigation included the isolation and identification of remin-like enzyme fungal producers from different egyptian food and soil samples. Different factors including gamma radiation affecting the capability of selected isolate to produce the enzyme was also included. Special attention has also given to study the effect of different purification methods of the produced enzyme. The properties of the purified enzyme were also investigated

Measurement of the particle production properties in ATLAS

CERN Document Server

Bruni, Alessia; The ATLAS collaboration

2017-01-01

Measurements of the particle production properties with the ATLAS detector A correct modelling of the underlying event in proton-proton collisions is important for the proper simulation of kinematic distributions of high-energy collisions. The ATLAS collaboration extended previous studies at 7 TeV with a leading track or jet or Z boson by a new study at 13 TeV, measuring the number and transverse-momentum sum of charged particles as a function of pseudorapidity and azimuthal angle in dependence of the reconstructed leading track. These measurements are sensitive to the underlying-event as well as the onset of hard emissions. The results are compared to predictions of several MC generators. A similar comparison between measurements and MC generator predictions will be shown for the strange meson content in topquark pair events. Studies of particle correlations in high-energy collisions can provide valuable insights into the detailed understanding of the space-time geometry of the hadronization region. The ATLA...

Unilateral Measures addressing Non-Trade Concerns. A Study on WTO Consistency, Relevance of other International Agreements, Economic Effectiveness and Impact on Developing Countries of Measures concerning Non-Product-Related Processes and Production Methods

International Nuclear Information System (INIS)

Van den Bossche, P.; Schrijver, N.; Faber, G.

2007-01-01

Over the last two years, the debate in the Netherlands on trade measures addressing non-trade concerns has focused on two important and politically sensitive issues, namely: (1) the sustainability of the large-scale production of biomass as an alternative source of energy; and (2) the production of livestock products in a manner that is consistent with animal welfare requirements. In February 2007 a report was issued on the 'Toetsingskader voor Duurzame Biomassa', the so-called Cramer Report. This report discusses the risks associated with large-scale biomass production and establishes a list of criteria for the sustainable production of biomass. These criteria reflect a broad range of non-trade concerns, including environmental protection, global warming, food security, biodiversity, economic prosperity and social welfare. The report recognizes that the implementation of the criteria (including the establishment of a certification system) will require careful consideration of the obligations of the Netherlands under EU and WTO law. Governments called upon to address non-trade concerns may do so by using different types of measures. Prominent among these are measures concerning processes and production methods of products. In the present study, these issues are examined primarily with regard to existing, proposed or still purely hypothetical measures for implementing the Cramer criteria for the sustainable production of biomass. Several other, non-energy-related issues are discussed in this report

Primary production measurements at three reservoirs in the state of Sao Paulo, Brazil

International Nuclear Information System (INIS)

Jureidini, P.; Chinez, S.J.; Agudo, E.G.

1983-01-01

Primary production measurements were carried out at three reservoirs in the state of Sao Paulo, Barra Bonita, Paiva Castro and Ponte nova using the 14 C technique. Meanwhile, several physical and chemical parameters of these water were also evaluated, in order to find out the limnological conditions of these reservoirs. Primary production rates ranged from 7,6mg C/m 3 d at Ponte Nova, to 247,2mg C/m 3 d at Barra Bonita. There seems to be god correlation between water quality data and primary production measurements. Regarding the results, it may be stated that the Barra Bonita reservoir has reached the eutrophic level, while the other two exibit mesotrophic levels. As a way of testing the water quality data collected was used in Churchill and Nicholas model, issuing results in agreement with those of the primary production measurements. (Author) [pt

Measurement cross sections for radioisotopes production

International Nuclear Information System (INIS)

Garrido, E.

2011-01-01

New radioactive isotopes for nuclear medicine can be produced using particle accelerators. This is one goal of Arronax, a high energy - 70 MeV - high intensity - 2*350 μA - cyclotron set up in Nantes. A priority list was established containing β - - 47 Sc, 67 Cu - β + - 44 Sc, 64 Cu, 82 Sr/ 82 Rb, 68 Ge/ 68 Ga - and α emitters - 211 At. Among these radioisotopes, the Scandium 47 and the Copper 67 have a strong interest in targeted therapy. The optimization of their productions required a good knowledge of their cross-sections but also of all the contaminants created during irradiation. We launched on Arronax a program to measure these production cross-sections using the Stacked-Foils' technique. It consists in irradiating several groups of foils - target, monitor and degrader foils - and in measuring the produced isotopes by γ-spectrometry. The monitor - nat Cu or nat Ni - is used to correct beam loss whereas degrader foils are used to lower beam energy. We chose to study the nat Ti(p,X) 47 Sc and 68 Zn(p,2p) 67 Cu reactions. Targets are respectively natural Titanium foil - bought from Goodfellow - and enriched Zinc 68 deposited on Silver. In the latter case, Zn targets were prepared in-house - electroplating of 68 Zn - and a chemical separation between Copper and Gallium isotopes has to be made before γ counting. Cross-section values for more than 40 different reactions cross-sections have been obtained from 18 MeV to 68 MeV. A comparison with the Talys code is systematically done. Several parameters of theoretical models have been studied and we found that is not possible to reproduce faithfully all the cross-sections with a given set of parameters. (author)

Factors Affecting sex pheromone production in female cotton leaf worm moth, Spodoptera littoralis (boisd.)

International Nuclear Information System (INIS)

Sallam, H.A.; Hazaa, M.A.; Abd El-Rahman, H.A.; Hussein, M.A.

2000-01-01

Factors influencing sex pheromone production in the cotton leaf worm female moth with emphasis on gamma radiation were investigated. To determine the effect of age on sex pheromone production, ether extracts of the female abdominal tips were prepared from virgin females of various ages in a concentration of 0.01 FE/mu L. Each female extract was tested against 1-2 days-old males. The obtained results indicated that virgin females could secrete sex pheromone early at the beginning of their life. The pheromone production increased rapidly to reach its maximum on the second day. To study the effect of daytime on sex pheromone production, the ether extracts of 1-2 days old virgin female abdominal tips were prepared at 3 hour-intervals, throughout the photo phase and scotophase in a concentration of 0.01 FE/mu L. The obtained results indicated that pheromone production showed a minimum concentration at mid-day during the photo phase. It then increased to a moderate concentration from 7:0 p.m. to 10:0 p.m. and reached its maximum titer at almost mid-night. The obtained data on the effect of gamma irradiation indicated that irradiation of 3 and 6-day-old female pupae with doses of 60 and 120 Gy, respectively caused a reduction of 28.1 and 27.3 % in male response, respectively, to female sex pheromone extracts. When full-grown female pupae were irradiated with 200 and 350 Gy, a reduction of 15.6 and 75% in male response, respectively, was reached. Thus, an irradiation dose of 350 Gy applied to full-grown female pupae could severely affect pheromone production of the emerging female moths

Measurement of Charged Current Coherent Pion Production by Neutrinos on Carbon at MINER$\

Energy Technology Data Exchange (ETDEWEB)

Mislivec, Aaron Robert [Univ. of Rochester, NY (United States)

2017-01-01

Neutrino-nucleus coherent pion production is a rare neutrino scattering process where the squared four-momentum transferred to the nucleus is small, a lepton and pion are produced in the forward direction, and the nucleus remains in its initial state. This process is an important background in neutrino oscillation experiments. Measurements of coherent pion production are needed to constrain models which are used to predict coherent pion production in oscillation experiments. This thesis reports measurements of νµ and νµ charged current coherent pion production on carbon for neutrino energies in the range 2 < Eν < 20 GeV. The measurements were made using data from MINERνA, which is a dedicated neutrino-nucleus scattering experiment that uses a fi scintillator tracking detector in the high-intensity NuMI neutrino beam at Fermilab. Coherent interactions were isolated from the data using only model-independent signatures of the reaction, which are a forward muon and pion, no evidence of nuclear breakup, and small four-momentum transfer to the nucleus. The measurements were compared to the coherent pion production model used by oscillation experiments. The data and model agree in the total interaction rate and are similar in the dependence of the interaction rate on the squared four- momentum transferred from the neutrino. The data and model disagree significantly in the pion kinematics. The measured νµ and νµ interaction rates are consistent, which supports model predictions that the neutrino and antineutrino interaction rates are equal.

Measuring the Productivity of Energy Consumption of Major Industries in China: A DEA-Based Method

Directory of Open Access Journals (Sweden)

Xishuang Han

2014-01-01

Full Text Available Data envelopment analysis can be applied to measure the productivity of multiple input and output decision-making units. In addition, the data envelopment analysis-based Malmquist productivity index can be used as a tool for measuring the productivity change during different time periods. In this paper, we use an input-oriented model to measure the energy consumption productivity change from 1999 to 2008 of fourteen industry sectors in China as decision-making units. The results show that there are only four sectors that experienced effective energy consumption throughout the whole reference period. It also shows that these sectors always lie on the efficiency frontier of energy consumption as benchmarks. The other ten sectors experienced inefficiency in some two-year time periods and the productivity changes were not steady. The data envelopment analysis-based Malmquist productivity index provides a good way to measure the energy consumption and can give China's policy makers the information to promote their strategy of sustainable development.

Measurement of K0S, Λ and anti Λ production at HERA

International Nuclear Information System (INIS)

Chekanov, S.; Derrick, M.; Magill, S.

2006-12-01

The production of the neutral strange hadrons K 0 S , Λ and anti Λ has been measured in ep collisions at HERA using the ZEUS detector. Cross sections, baryon-to-meson ratios, relative yields of strange and charged light hadrons, Λ (anti Λ) asymmetry and polarization have been measured in three kinematic regions: Q 2 >25 GeV 2 ; 5 2 2 ; and in photoproduction (Q 2 ≅0), in which the presence of two hadronic jets, each with at least 5 GeV transverse energy, was required. The measurements agree in general with Monte Carlo models and are consistent with measurements made at e + e - colliders, except for an enhancement of baryon relative to meson production in photoproduction. (orig.)

Factors affecting neutron measurements and calculations. Part E. Hydrogen content in granite

International Nuclear Information System (INIS)

Komatsubara, Tetsuro; Sasa, Kimikazu; Ohshima, Hiroyuki

2005-01-01

For evaluation of radiation doses from the atomic bomb at Hiroshima, many systematic measurements have been made of the residual activities of activation products in rocks and concrete. For the Motoyasu Bridge, which is located close to the bomb hypocenter, the depth profile of 152 Eu was measured in a granite core (Hasai et al. 1987; Shizuma et al. 1997). In order to reproduce the depth profile of the activities, it is important to calculate the neutron scattering and absorption (Endo et al. 1999). In this section, the first result of hydrogen analysis by proton-proton elastic recoil coincidence spectrometry for the granite samples is described. (author)

Milk Technological Properties as Affected by Including Artichoke By-Products Silages in the Diet of Dairy Goats

Directory of Open Access Journals (Sweden)

Raquel Muelas

2017-12-01

Full Text Available Traditional farming practices include the use of local agricultural by-products in the diet of ruminants. Artichoke harvesting and transformation yield high amounts of by-products that, if properly used, may reduce farming costs and the environmental impact of farming. The present study tests the inclusion of silages from artichoke by-products (plant and outer bracts in the diet of dairy goats (0%, 12.5% and 25% inclusion on the technological and sensory properties of milk during a five-month study. Milk composition, color, stability, coagulation and fermentation properties remained unaffected by diet changes. Panelists were not able to differentiate among yogurts obtained from those milks by discriminant triangular sensory tests. Silages of artichoke by-products can be included in isoproteic and isoenergetic diets for dairy goats, up to a 25% (feed dry matter, without negatively affecting milk technological and sensory properties whereas reducing feeding costs.

Simulating local measurements on a quantum many-body system with stochastic matrix product states

DEFF Research Database (Denmark)

Gammelmark, Søren; Mølmer, Klaus

2010-01-01

We demonstrate how to simulate both discrete and continuous stochastic evolutions of a quantum many-body system subject to measurements using matrix product states. A particular, but generally applicable, measurement model is analyzed and a simple representation in terms of matrix product operators...... is found. The technique is exemplified by numerical simulations of the antiferromagnetic Heisenberg spin-chain model subject to various instances of the measurement model. In particular, we focus on local measurements with small support and nonlocal measurements, which induce long-range correlations....

Measurement of charm and beauty production in deep inelastic scattering at HERA

International Nuclear Information System (INIS)

Roloff, Philipp

2011-12-01

In this thesis two measurements of heavy quark production in deep inelastic scattering at HERA are presented. Cross sections for the production of heavy quarks can be calculated in quantum chromodynamics (QCD). The heavy quark masses represent hard scales, which allow to apply perturbative methods. Charm production has been measured with the ZEUS detector using an integrated luminosity of 120 pb -1 . The hadronic decay channels D + → K 0 S π + , Λ + c → pK 0 S and Λ + c → Λπ + were reconstructed. The presence of a neutral strange hadron in the final state reduces the combinatorial background and extends the measured sensitivity into the region p T (D + , Λ + c ) T 2 (D + ), η(D + ), Q 2 and x for the production of D + mesons are in reasonable agreement with predictions from perturbative QCD. The fraction of c quarks hadronising into Λ + c baryons was extracted from a combination of both investigated Λ + c decay channels. The result is consistent with a previous measurement in the photoproduction regime and with the average e + e - value. The production of charm and beauty quarks has been measured with the ZEUS detector using the data collected between 2004 and 2007. This data sample corresponds to an integrated luminosity of 354 pb -1 . The charm and beauty contents in events with a jet were determined using the decay-length significance and invariant mass of the reconstructed secondary decay vertices. Differential cross sections in E jet T , η jet , Q 2 and x are in reasonable agreement with predictions for perturbative QCD. The open charm and beauty contributions to the inclusive proton structure function F 2 were extracted from double differential cross sections in x and Q 2 . The obtained F c anti c 2 and F b anti b 2 values are in good agreement with previous measurements and theoretical predictions. This measurement represents the most precise determination of F b anti b 2 at the HERA collider in a large part of the accessible phase space

Machine learning applied to the prediction of citrus production

International Nuclear Information System (INIS)

Díaz, I.; Mazza, S.M.; Combarro, E.F.; Giménez, L.I.; Gaiad, J.E.

2017-01-01

An in-depth knowledge about variables affecting production is required in order to predict global production and take decisions in agriculture. Machine learning is a technique used in agricultural planning and precision agriculture. This work (i) studies the effectiveness of machine learning techniques for predicting orchards production; and (ii) variables affecting this production were also identified. Data from 964 orchards of lemon, mandarin, and orange in Corrientes, Argentina are analysed. Graphic and analytical descriptive statistics, correlation coefficients, principal component analysis and Biplot were performed. Production was predicted via M5-Prime, a model regression tree constructor which produces a classification based on piecewise linear functions. For all the species studied, the most informative variable was the trees' age; in mandarin and orange orchards, age was followed by between and within row distances; irrigation also affected mandarin production. Also, the performance of M5-Prime in the prediction of production is adequate, as shown when measured with correlation coefficients (~0.8) and relative mean absolute error (~0.1). These results show that M5-Prime is an appropriate method to classify citrus orchards according to production and, in addition, it allows for identifying the most informative variables affecting production by tree.

Machine learning applied to the prediction of citrus production

Directory of Open Access Journals (Sweden)

Irene Díaz

2017-07-01

Full Text Available An in-depth knowledge about variables affecting production is required in order to predict global production and take decisions in agriculture. Machine learning is a technique used in agricultural planning and precision agriculture. This work (i studies the effectiveness of machine learning techniques for predicting orchards production; and (ii variables affecting this production were also identified. Data from 964 orchards of lemon, mandarin, and orange in Corrientes, Argentina are analysed. Graphic and analytical descriptive statistics, correlation coefficients, principal component analysis and Biplot were performed. Production was predicted via M5-Prime, a model regression tree constructor which produces a classification based on piecewise linear functions. For all the species studied, the most informative variable was the trees’ age; in mandarin and orange orchards, age was followed by between and within row distances; irrigation also affected mandarin production. Also, the performance of M5-Prime in the prediction of production is adequate, as shown when measured with correlation coefficients (~0.8 and relative mean absolute error (~0.1. These results show that M5-Prime is an appropriate method to classify citrus orchards according to production and, in addition, it allows for identifying the most informative variables affecting production by tree.

Machine learning applied to the prediction of citrus production

Energy Technology Data Exchange (ETDEWEB)

Díaz, I.; Mazza, S.M.; Combarro, E.F.; Giménez, L.I.; Gaiad, J.E.

2017-07-01

An in-depth knowledge about variables affecting production is required in order to predict global production and take decisions in agriculture. Machine learning is a technique used in agricultural planning and precision agriculture. This work (i) studies the effectiveness of machine learning techniques for predicting orchards production; and (ii) variables affecting this production were also identified. Data from 964 orchards of lemon, mandarin, and orange in Corrientes, Argentina are analysed. Graphic and analytical descriptive statistics, correlation coefficients, principal component analysis and Biplot were performed. Production was predicted via M5-Prime, a model regression tree constructor which produces a classification based on piecewise linear functions. For all the species studied, the most informative variable was the trees' age; in mandarin and orange orchards, age was followed by between and within row distances; irrigation also affected mandarin production. Also, the performance of M5-Prime in the prediction of production is adequate, as shown when measured with correlation coefficients (~0.8) and relative mean absolute error (~0.1). These results show that M5-Prime is an appropriate method to classify citrus orchards according to production and, in addition, it allows for identifying the most informative variables affecting production by tree.

Jet angularity measurements for single inclusive jet production

Science.gov (United States)

Kang, Zhong-Bo; Lee, Kyle; Ringer, Felix

2018-04-01

We study jet angularity measurements for single-inclusive jet production at the LHC. Jet angularities depend on a continuous parameter a allowing for a smooth interpolation between different traditional jet shape observables. We establish a factorization theorem within Soft Collinear Effective Theory (SCET) where we consistently take into account in- and out-of-jet radiation by making use of semi-inclusive jet functions. For comparison, we elaborate on the differences to jet angularities measured on an exclusive jet sample. All the necessary ingredients for the resummation at next-to-leading logarithmic (NLL) accuracy are presented within the effective field theory framework. We expect semiinclusive jet angularity measurements to be feasible at the LHC and we present theoretical predictions for the relevant kinematic range. In addition, we investigate the potential impact of jet angularities for quark-gluon discrimination.

A neutron detector for measurement of total neutron production cross sections

International Nuclear Information System (INIS)

Sekharan, K.K.; Laumer, H.; Kern, B.D.; Gabbard, F.

1976-01-01

A neutron detector has been constructed and calibrated for the accurate measurement of total neutron production cross sections. The detector consists of a polyethylene sphere of 60 cm diameter in which eight 10 BF 3 counters have been installed radially. The relative efficiency of this detector has been determined for average neutron energies from 30 keV to 1.5 MeV by counting neutrons from 7 Li(p, n) 7 Be. By adjusting the radial positions of the BF 3 counters in the polyethylene sphere the efficiency for neutron detection was made nearly constant for this energy range. Measurement of absolute efficiency for the same neutron energy range has been done by counting the neutrons from 51 V(p, n) 51 Cr and 57 Fe(p, n) 57 Co reactions and determining the absolute number of residual nuclei produced during the measurement of neutron yield. Details of absolute efficiency measurements and the use of the detector for determination of neutron production cross sections are given. (Auth.)

Do the Czech Production Plants Measure the Performance of Energy Processes?

Directory of Open Access Journals (Sweden)

Zuzana Tučková

2016-04-01

Full Text Available The research was focused to the actual situation in Performance Measurement of the energy processes in Czech production plants. The results are back – upped by the previous researches which were aimed to performance measurement methods usage in the whole organizational structure of the plants. Although the most of big industrial companies declared using of modern Performance Measurements methods, the previous researches shown that it is not purely true. The bigger differences were found in the energy area – energy processes. The authors compared the Energy concepts of European Union (EU and Czech Republic (CZ which are very different and do not create any possibilities for manager’s clear decision in the process management strategy of energy processes in their companies. Next step included the Energy department’s analysis. The significant part of energy processes in the production plants is still not mapped, described and summarized to one methodical manual for managing and performance measurement.

Quantifying movements of corrosion products in reinforced concrete using x-ray attenuation measurements

DEFF Research Database (Denmark)

Pease, Bradley Justin; Michel, Alexander; Stang, Henrik

2011-01-01

Corrosion of steel reinforcement, embedded in concrete, may substantially degrade concrete structures due to the expansive nature of corrosion products. Expansion of corrosion products cause tensile stresses to develop and cracks to form in concrete. Extensive research has focused on corrosion...... of corrosion products move into the concrete without generating tensile stresses and cracks in the concrete. Typically, corrosion products are thought to occupy pores, interfacial defects, and/or air voids located near the concrete-steel interface and stresses develop only after filling of these pores. Further....... X-ray attenuation measurements are also capable of detecting cracks. Therefore, this approach provides a direct measurement of the amount and location of reinforcement corrosion products required to induce cracking. Results of a parametric investigation on the impact of water-to-cement ratio (0...

Upper bounds on quantum uncertainty products and complexity measures

Energy Technology Data Exchange (ETDEWEB)

Guerrero, Angel; Sanchez-Moreno, Pablo; Dehesa, Jesus S. [Department of Atomic, Molecular and Nuclear Physics, University of Granada, Granada (Spain); Department of Applied Mathematics, University of Granada, Granada (Spain) and Institute Carlos I for Computational and Theoretical Physics, University of Granada, Granada (Spain); Department of Atomic, Molecular and Nuclear Physics, University of Granada, Granada (Spain); Institute Carlos I for Computational and Theoretical Physics, University of Granada, Granada (Spain)

2011-10-15

The position-momentum Shannon and Renyi uncertainty products of general quantum systems are shown to be bounded not only from below (through the known uncertainty relations), but also from above in terms of the Heisenberg-Kennard product . Moreover, the Cramer-Rao, Fisher-Shannon, and Lopez-Ruiz, Mancini, and Calbet shape measures of complexity (whose lower bounds have been recently found) are also bounded from above. The improvement of these bounds for systems subject to spherically symmetric potentials is also explicitly given. Finally, applications to hydrogenic and oscillator-like systems are done.

Acute central neuropeptide Y administration increases food intake but does not affect hepatic very low-density lipoprotein (VLDL production in mice.

Directory of Open Access Journals (Sweden)

Janine J Geerling

Full Text Available OBJECTIVE: Central neuropeptide Y (NPY administration stimulates food intake in rodents. In addition, acute modulation of central NPY signaling increases hepatic production of very low-density lipoprotein (VLDL-triglyceride (TG in rats. As hypertriglyceridemia is an important risk factor for atherosclerosis, for which well-established mouse models are available, we set out to validate the effect of NPY on hepatic VLDL-TG production in mice, to ultimately investigate whether NPY, by increasing VLDL production, contributes to the development of atherosclerosis. RESEARCH DESIGN AND METHODS: Male C57Bl/6J mice received an intracerebroventricular (i.c.v. cannula into the lateral (LV or third (3V ventricle of the brain. One week later, after a 4 h fast, the animals received an intravenous (i.v. injection of Tran(35S (100 µCi followed by tyloxapol (500 mg/kg body weight; BW, enabling the study of hepatic VLDL-apoB and VLDL-TG production, respectively. Immediately after the i.v. injection of tyloxapol, the animals received either an i.c.v. injection of NPY (0.2 mg/kg BW in artificial cerebrospinal fluid; aCSF, synthetic Y1 receptor antagonist GR231118 (0.5 mg/kg BW in aCSF or vehicle (aCSF, or an i.v. injection of PYY3-36 (0.5 mg/kg BW in PBS or vehicle (PBS. RESULTS: Administration of NPY into both the LV and 3V increased food intake within one hour after injection (+164%, p<0.001 and +367%, p<0.001, respectively. NPY administration neither in the LV nor in the 3V affected hepatic VLDL-TG or VLDL-apoB production. Likewise, antagonizing central NPY signaling by either PYY3-36 or GR231118 administration did not affect hepatic VLDL production. CONCLUSION: In mice, as opposed to rats, acute central administration of NPY increases food intake without affecting hepatic VLDL production. These results are of great significance when extrapolating findings on the central regulation of hepatic VLDL production between species.

Measurement of Upsilon production in 7 TeV pp collisions at ATLAS

CERN Document Server

Aad, Georges; Abbott, Brad; Abdallah, Jalal; Abdel Khalek, Samah; Abdelalim, Ahmed Ali; Abdinov, Ovsat; Aben, Rosemarie; Abi, Babak; Abolins, Maris; AbouZeid, Ossama; Abramowicz, Halina; Abreu, Henso; Acharya, Bobby Samir; Adamczyk, Leszek; Adams, David; Addy, Tetteh; Adelman, Jahred; Adomeit, Stefanie; Adragna, Paolo; Adye, Tim; Aefsky, Scott; Aguilar-Saavedra, Juan Antonio; Agustoni, Marco; Aharrouche, Mohamed; Ahlen, Steven; Ahles, Florian; Ahmad, Ashfaq; Ahsan, Mahsana; Aielli, Giulio; Åkesson, Torsten Paul Ake; Akimoto, Ginga; Akimov, Andrei; Alam, Mohammad; Alam, Muhammad Aftab; Albert, Justin; Albrand, Solveig; Aleksa, Martin; Aleksandrov, Igor; Alessandria, Franco; Alexa, Calin; Alexander, Gideon; Alexandre, Gauthier; Alexopoulos, Theodoros; Alhroob, Muhammad; Aliev, Malik; Alimonti, Gianluca; Alison, John; Allbrooke, Benedict; Allport, Phillip; Allwood-Spiers, Sarah; Almond, John; Aloisio, Alberto; Alon, Raz; Alonso, Alejandro; Alonso, Francisco; Altheimer, Andrew David; Alvarez Gonzalez, Barbara; Alviggi, Mariagrazia; Amako, Katsuya; Amelung, Christoph; Ammosov, Vladimir; Amor Dos Santos, Susana Patricia; Amorim, Antonio; Amram, Nir; Anastopoulos, Christos; Ancu, Lucian Stefan; Andari, Nansi; Andeen, Timothy; Anders, Christoph Falk; Anders, Gabriel; Anderson, Kelby; Andreazza, Attilio; Andrei, George Victor; Andrieux, Marie-Laure; Anduaga, Xabier; Angelidakis, Stylianos; Anger, Philipp; Angerami, Aaron; Anghinolfi, Francis; Anisenkov, Alexey; Anjos, Nuno; Annovi, Alberto; Antonaki, Ariadni; Antonelli, Mario; Antonov, Alexey; Antos, Jaroslav; Anulli, Fabio; Aoki, Masato; Aoun, Sahar; Aperio Bella, Ludovica; Apolle, Rudi; Arabidze, Giorgi; Aracena, Ignacio; Arai, Yasuo; Arce, Ayana; Arfaoui, Samir; Arguin, Jean-Francois; Argyropoulos, Spyridon; Arik, Engin; Arik, Metin; Armbruster, Aaron James; Arnaez, Olivier; Arnal, Vanessa; Artamonov, Andrei; Artoni, Giacomo; Arutinov, David; Asai, Shoji; Ask, Stefan; Åsman, Barbro; Asquith, Lily; Assamagan, Ketevi; Astbury, Alan; Atkinson, Markus; Aubert, Bernard; Auge, Etienne; Augsten, Kamil; Aurousseau, Mathieu; Avolio, Giuseppe; Axen, David; Azuelos, Georges; Azuma, Yuya; Baak, Max; Baccaglioni, Giuseppe; Bacci, Cesare; Bach, Andre; Bachacou, Henri; Bachas, Konstantinos; Backes, Moritz; Backhaus, Malte; Backus Mayes, John; Badescu, Elisabeta; Bagnaia, Paolo; Bahinipati, Seema; Bai, Yu; Bailey, David; Bain, Travis; Baines, John; Baker, Oliver Keith; Baker, Mark; Baker, Sarah; Balek, Petr; Banas, Elzbieta; Banerjee, Piyali; Banerjee, Swagato; Banfi, Danilo; Bangert, Andrea Michelle; Bansal, Vikas; Bansil, Hardeep Singh; Barak, Liron; Baranov, Sergei; Barbaro Galtieri, Angela; Barber, Tom; Barberio, Elisabetta Luigia; Barberis, Dario; Barbero, Marlon; Bardin, Dmitri; Barillari, Teresa; Barisonzi, Marcello; Barklow, Timothy; Barlow, Nick; Barnett, Bruce; Barnett, Michael; Baroncelli, Antonio; Barone, Gaetano; Barr, Alan; Barreiro, Fernando; Barreiro Guimarães da Costa, João; Bartoldus, Rainer; Barton, Adam Edward; Bartsch, Valeria; Basye, Austin; Bates, Richard; Batkova, Lucia; Batley, Richard; Battaglia, Andreas; Battistin, Michele; Bauer, Florian; Bawa, Harinder Singh; Beale, Steven; Beau, Tristan; Beauchemin, Pierre-Hugues; Beccherle, Roberto; Bechtle, Philip; Beck, Hans Peter; Becker, Anne Kathrin; Becker, Sebastian; Beckingham, Matthew; Becks, Karl-Heinz; Beddall, Andrew; Beddall, Ayda; Bedikian, Sourpouhi; Bednyakov, Vadim; Bee, Christopher; Beemster, Lars; Begel, Michael; Behar Harpaz, Silvia; Behera, Prafulla; Beimforde, Michael; Belanger-Champagne, Camille; Bell, Paul; Bell, William; Bella, Gideon; Bellagamba, Lorenzo; Bellomo, Massimiliano; Belloni, Alberto; Beloborodova, Olga; Belotskiy, Konstantin; Beltramello, Olga; Benary, Odette; Benchekroun, Driss; Bendtz, Katarina; Benekos, Nektarios; Benhammou, Yan; Benhar Noccioli, Eleonora; Benitez Garcia, Jorge-Armando; Benjamin, Douglas; Benoit, Mathieu; Bensinger, James; Benslama, Kamal; Bentvelsen, Stan; Berge, David; Bergeaas Kuutmann, Elin; Berger, Nicolas; Berghaus, Frank; Berglund, Elina; Beringer, Jürg; Bernat, Pauline; Bernhard, Ralf; Bernius, Catrin; Berry, Tracey; Bertella, Claudia; Bertin, Antonio; Bertolucci, Federico; Besana, Maria Ilaria; Besjes, Geert-Jan; Besson, Nathalie; Bethke, Siegfried; Bhimji, Wahid; Bianchi, Riccardo-Maria; Bianchini, Louis; Bianco, Michele; Biebel, Otmar; Bieniek, Stephen Paul; Bierwagen, Katharina; Biesiada, Jed; Biglietti, Michela; Bilokon, Halina; Bindi, Marcello; Binet, Sebastien; Bingul, Ahmet; Bini, Cesare; Biscarat, Catherine; Bittner, Bernhard; Black, Curtis; Black, Kevin; Blair, Robert; Blanchard, Jean-Baptiste; Blanchot, Georges; Blazek, Tomas; Bloch, Ingo; Blocker, Craig; Blocki, Jacek; Blondel, Alain; Blum, Walter; Blumenschein, Ulrike; Bobbink, Gerjan; Bobrovnikov, Victor; Bocchetta, Simona Serena; Bocci, Andrea; Boddy, Christopher Richard; Boehler, Michael; Boek, Jennifer; Boek, Thorsten Tobias; Boelaert, Nele; Bogaerts, Joannes Andreas; Bogdanchikov, Alexander; Bogouch, Andrei; Bohm, Christian; Bohm, Jan; Boisvert, Veronique; Bold, Tomasz; Boldea, Venera; Bolnet, Nayanka Myriam; Bomben, Marco; Bona, Marcella; Boonekamp, Maarten; Bordoni, Stefania; Borer, Claudia; Borisov, Anatoly; Borissov, Guennadi; Borjanovic, Iris; Borri, Marcello; Borroni, Sara; Bortfeldt, Jonathan; Bortolotto, Valerio; Bos, Kors; Boscherini, Davide; Bosman, Martine; Boterenbrood, Hendrik; Bouchami, Jihene; Boudreau, Joseph; Bouhova-Thacker, Evelina Vassileva; Boumediene, Djamel Eddine; Bourdarios, Claire; Bousson, Nicolas; Boveia, Antonio; Boyd, James; Boyko, Igor; Bozovic-Jelisavcic, Ivanka; Bracinik, Juraj; Branchini, Paolo; Brandt, Andrew; Brandt, Gerhard; Brandt, Oleg; Bratzler, Uwe; Brau, Benjamin; Brau, James; Braun, Helmut; Brazzale, Simone Federico; Brelier, Bertrand; Bremer, Johan; Brendlinger, Kurt; Brenner, Richard; Bressler, Shikma; Britton, Dave; Brochu, Frederic; Brock, Ian; Brock, Raymond; Broggi, Francesco; Bromberg, Carl; Bronner, Johanna; Brooijmans, Gustaaf; Brooks, Timothy; Brooks, William; Brown, Gareth; Bruckman de Renstrom, Pawel; Bruncko, Dusan; Bruneliere, Renaud; Brunet, Sylvie; Bruni, Alessia; Bruni, Graziano; Bruschi, Marco; Bryngemark, Lene; Buanes, Trygve; Buat, Quentin; Bucci, Francesca; Buchanan, James; Buchholz, Peter; Buckingham, Ryan; Buckley, Andrew; Buda, Stelian Ioan; Budagov, Ioulian; Budick, Burton; Büscher, Volker; Bugge, Lars; Bulekov, Oleg; Bundock, Aaron Colin; Bunse, Moritz; Buran, Torleiv; Burckhart, Helfried; Burdin, Sergey; Burgess, Thomas; Burke, Stephen; Busato, Emmanuel; Bussey, Peter; Buszello, Claus-Peter; Butler, Bart; Butler, John; Buttar, Craig; Butterworth, Jonathan; Buttinger, William; Byszewski, Marcin; Cabrera Urbán, Susana; Caforio, Davide; Cakir, Orhan; Calafiura, Paolo; Calderini, Giovanni; Calfayan, Philippe; Calkins, Robert; Caloba, Luiz; Caloi, Rita; Calvet, David; Calvet, Samuel; Camacho Toro, Reina; Camarri, Paolo; Cameron, David; Caminada, Lea Michaela; Caminal Armadans, Roger; Campana, Simone; Campanelli, Mario; Canale, Vincenzo; Canelli, Florencia; Canepa, Anadi; Cantero, Josu; Cantrill, Robert; Capasso, Luciano; Capeans Garrido, Maria Del Mar; Caprini, Irinel; Caprini, Mihai; Capriotti, Daniele; Capua, Marcella; Caputo, Regina; Cardarelli, Roberto; Carli, Tancredi; Carlino, Gianpaolo; Carminati, Leonardo; Caron, Bryan; Caron, Sascha; Carquin, Edson; Carrillo-Montoya, German D; Carter, Antony; Carter, Janet; Carvalho, João; Casadei, Diego; Casado, Maria Pilar; Cascella, Michele; Caso, Carlo; Castaneda Hernandez, Alfredo Martin; Castaneda-Miranda, Elizabeth; Castillo Gimenez, Victoria; Castro, Nuno Filipe; Cataldi, Gabriella; Catastini, Pierluigi; Catinaccio, Andrea; Catmore, James; Cattai, Ariella; Cattani, Giordano; Caughron, Seth; Cavaliere, Viviana; Cavalleri, Pietro; Cavalli, Donatella; Cavalli-Sforza, Matteo; Cavasinni, Vincenzo; Ceradini, Filippo; Santiago Cerqueira, Augusto; Cerri, Alessandro; Cerrito, Lucio; Cerutti, Fabio; Cetin, Serkant Ali; Chafaq, Aziz; Chakraborty, Dhiman; Chalupkova, Ina; Chan, Kevin; Chang, Philip; Chapleau, Bertrand; Chapman, John Derek; Chapman, John Wehrley; Charlton, Dave; Chavda, Vikash; Chavez Barajas, Carlos Alberto; Cheatham, Susan; Chekanov, Sergei; Chekulaev, Sergey; Chelkov, Gueorgui; Chelstowska, Magda Anna; Chen, Chunhui; Chen, Hucheng; Chen, Shenjian; Chen, Xin; Chen, Yujiao; Cheng, Yangyang; Cheplakov, Alexander; Cherkaoui El Moursli, Rajaa; Chernyatin, Valeriy; Cheu, Elliott; Cheung, Sing-Leung; Chevalier, Laurent; Chiefari, Giovanni; Chikovani, Leila; Childers, John Taylor; Chilingarov, Alexandre; Chiodini, Gabriele; Chisholm, Andrew; Chislett, Rebecca Thalatta; Chitan, Adrian; Chizhov, Mihail; Choudalakis, Georgios; Chouridou, Sofia; Christidi, Ilektra-Athanasia; Christov, Asen; Chromek-Burckhart, Doris; Chu, Ming-Lee; Chudoba, Jiri; Ciapetti, Guido; Ciftci, Abbas Kenan; Ciftci, Rena; Cinca, Diane; Cindro, Vladimir; Ciocio, Alessandra; Cirilli, Manuela; Cirkovic, Predrag; Citron, Zvi Hirsh; Citterio, Mauro; Ciubancan, Mihai; Clark, Allan G; Clark, Philip James; Clarke, Robert; Cleland, Bill; Clemens, Jean-Claude; Clement, Benoit; Clement, Christophe; Coadou, Yann; Cobal, Marina; Coccaro, Andrea; Cochran, James H; Coffey, Laurel; Cogan, Joshua Godfrey; Coggeshall, James; Colas, Jacques; Cole, Stephen; Colijn, Auke-Pieter; Collins, Neil; Collins-Tooth, Christopher; Collot, Johann; Colombo, Tommaso; Colon, German; Compostella, Gabriele; Conde Muiño, Patricia; Coniavitis, Elias; Conidi, Maria Chiara; Consonni, Sofia Maria; Consorti, Valerio; Constantinescu, Serban; Conta, Claudio; Conti, Geraldine; Conventi, Francesco; Cooke, Mark; Cooper, Ben; Cooper-Sarkar, Amanda; Copic, Katherine; Cornelissen, Thijs; Corradi, Massimo; Corriveau, Francois; Cortes-Gonzalez, Arely; Cortiana, Giorgio; Costa, Giuseppe; Costa, María José; Costanzo, Davide; Côté, David; Courneyea, Lorraine; Cowan, Glen; Cox, Brian; Cranmer, Kyle; Crescioli, Francesco; Cristinziani, Markus; Crosetti, Giovanni; Crépé-Renaudin, Sabine; Cuciuc, Constantin-Mihai; Cuenca Almenar, Cristóbal; Cuhadar Donszelmann, Tulay; Cummings, Jane; Curatolo, Maria; Curtis, Chris; Cuthbert, Cameron; Cwetanski, Peter; Czirr, Hendrik; Czodrowski, Patrick; Czyczula, Zofia; D'Auria, Saverio; D'Onofrio, Monica; D'Orazio, Alessia; Da Cunha Sargedas De Sousa, Mario Jose; Da Via, Cinzia; Dabrowski, Wladyslaw; Dafinca, Alexandru; Dai, Tiesheng; Dallaire, Frederick; Dallapiccola, Carlo; Dam, Mogens; Dameri, Mauro; Damiani, Daniel; Danielsson, Hans Olof; Dao, Valerio; Darbo, Giovanni; Darlea, Georgiana Lavinia; Dassoulas, James; Davey, Will; Davidek, Tomas; Davidson, Nadia; Davidson, Ruth; Davies, Eleanor; Davies, Merlin; Davignon, Olivier; Davison, Adam; Davygora, Yuriy; Dawe, Edmund; Dawson, Ian; Daya-Ishmukhametova, Rozmin; De, Kaushik; de Asmundis, Riccardo; De Castro, Stefano; De Cecco, Sandro; de Graat, Julien; De Groot, Nicolo; de Jong, Paul; De La Taille, Christophe; De la Torre, Hector; De Lorenzi, Francesco; de Mora, Lee; De Nooij, Lucie; De Pedis, Daniele; De Salvo, Alessandro; De Sanctis, Umberto; De Santo, Antonella; De Vivie De Regie, Jean-Baptiste; De Zorzi, Guido; Dearnaley, William James; Debbe, Ramiro; Debenedetti, Chiara; Dechenaux, Benjamin; Dedovich, Dmitri; Degenhardt, James; Del Peso, Jose; Del Prete, Tarcisio; Delemontex, Thomas; Deliyergiyev, Maksym; Dell'Acqua, Andrea; Dell'Asta, Lidia; Della Pietra, Massimo; della Volpe, Domenico; Delmastro, Marco; Delsart, Pierre-Antoine; Deluca, Carolina; Demers, Sarah; Demichev, Mikhail; Demirkoz, Bilge; Denisov, Sergey; Derendarz, Dominik; Derkaoui, Jamal Eddine; Derue, Frederic; Dervan, Paul; Desch, Klaus Kurt; Devetak, Erik; Deviveiros, Pier-Olivier; Dewhurst, Alastair; DeWilde, Burton; Dhaliwal, Saminder; Dhullipudi, Ramasudhakar; Di Ciaccio, Anna; Di Ciaccio, Lucia; Di Donato, Camilla; Di Girolamo, Alessandro; Di Girolamo, Beniamino; Di Luise, Silvestro; Di Mattia, Alessandro; Di Micco, Biagio; Di Nardo, Roberto; Di Simone, Andrea; Di Sipio, Riccardo; Diaz, Marco Aurelio; Diehl, Edward; Dietrich, Janet; Dietzsch, Thorsten; Diglio, Sara; Dindar Yagci, Kamile; Dingfelder, Jochen; Dinut, Florin; Dionisi, Carlo; Dita, Petre; Dita, Sanda; Dittus, Fridolin; Djama, Fares; Djobava, Tamar; Barros do Vale, Maria Aline; Do Valle Wemans, André; Doan, Thi Kieu Oanh; Dobbs, Matt; Dobos, Daniel; Dobson, Ellie; Dodd, Jeremy; Doglioni, Caterina; Doherty, Tom; Doi, Yoshikuni; Dolejsi, Jiri; Dolezal, Zdenek; Dolgoshein, Boris; Dohmae, Takeshi; Donadelli, Marisilvia; Donini, Julien; Dopke, Jens; Doria, Alessandra; Dos Anjos, Andre; Dotti, Andrea; Dova, Maria-Teresa; Doxiadis, Alexander; Doyle, Tony; Dressnandt, Nandor; Dris, Manolis; Dubbert, Jörg; Dube, Sourabh; Duchovni, Ehud; Duckeck, Guenter; Duda, Dominik; Dudarev, Alexey; Dudziak, Fanny; Dührssen, Michael; Duerdoth, Ian; Duflot, Laurent; Dufour, Marc-Andre; Duguid, Liam; Dunford, Monica; Duran Yildiz, Hatice; Duxfield, Robert; Dwuznik, Michal; Düren, Michael; Ebenstein, William; Ebke, Johannes; Eckweiler, Sebastian; Edmonds, Keith; Edson, William; Edwards, Clive; Edwards, Nicholas Charles; Ehrenfeld, Wolfgang; Eifert, Till; Eigen, Gerald; Einsweiler, Kevin; Eisenhandler, Eric; Ekelof, Tord; El Kacimi, Mohamed; Ellert, Mattias; Elles, Sabine; Ellinghaus, Frank; Ellis, Katherine; Ellis, Nicolas; Elmsheuser, Johannes; Elsing, Markus; Emeliyanov, Dmitry; Engelmann, Roderich; Engl, Albert; Epp, Brigitte; Erdmann, Johannes; Ereditato, Antonio; Eriksson, Daniel; Ernst, Jesse; Ernst, Michael; Ernwein, Jean; Errede, Deborah; Errede, Steven; Ertel, Eugen; Escalier, Marc; Esch, Hendrik; Escobar, Carlos; Espinal Curull, Xavier; Esposito, Bellisario; Etienne, Francois; Etienvre, Anne-Isabelle; Etzion, Erez; Evangelakou, Despoina; Evans, Hal; Fabbri, Laura; Fabre, Caroline; Fakhrutdinov, Rinat; Falciano, Speranza; Fang, Yaquan; Fanti, Marcello; Farbin, Amir; Farilla, Addolorata; Farley, Jason; Farooque, Trisha; Farrell, Steven; Farrington, Sinead; Farthouat, Philippe; Fassi, Farida; Fassnacht, Patrick; Fassouliotis, Dimitrios; Fatholahzadeh, Baharak; Favareto, Andrea; Fayard, Louis; Fazio, Salvatore; Federic, Pavol; Fedin, Oleg; Fedorko, Wojciech; Fehling-Kaschek, Mirjam; Feligioni, Lorenzo; Feng, Cunfeng; Feng, Eric; Fenyuk, Alexander; Ferencei, Jozef; Fernando, Waruna; Ferrag, Samir; Ferrando, James; Ferrara, Valentina; Ferrari, Arnaud; Ferrari, Pamela; Ferrari, Roberto; Ferreira de Lima, Danilo Enoque; Ferrer, Antonio; Ferrere, Didier; Ferretti, Claudio; Ferretto Parodi, Andrea; Fiascaris, Maria; Fiedler, Frank; Filipčič, Andrej; Filthaut, Frank; Fincke-Keeler, Margret; Fiolhais, Miguel; Fiorini, Luca; Firan, Ana; Fischer, Gordon; Fisher, Matthew; Flechl, Martin; Fleck, Ivor; Fleckner, Johanna; Fleischmann, Philipp; Fleischmann, Sebastian; Flick, Tobias; Floderus, Anders; Flores Castillo, Luis; Florez Bustos, Andres Carlos; Flowerdew, Michael; Fonseca Martin, Teresa; Formica, Andrea; Forti, Alessandra; Fortin, Dominique; Fournier, Daniel; Fowler, Andrew; Fox, Harald; Francavilla, Paolo; Franchini, Matteo; Franchino, Silvia; Francis, David; Frank, Tal; Franklin, Melissa; Franz, Sebastien; Fraternali, Marco; Fratina, Sasa; French, Sky; Friedrich, Conrad; Friedrich, Felix; Froidevaux, Daniel; Frost, James; Fukunaga, Chikara; Fullana Torregrosa, Esteban; Fulsom, Bryan Gregory; Fuster, Juan; Gabaldon, Carolina; Gabizon, Ofir; Gadfort, Thomas; Gadomski, Szymon; Gagliardi, Guido; Gagnon, Pauline; Galea, Cristina; Galhardo, Bruno; Gallas, Elizabeth; Gallo, Valentina Santina; Gallop, Bruce; Gallus, Petr; Gan, KK; Gao, Yongsheng; Gaponenko, Andrei; Garberson, Ford; Garcia-Sciveres, Maurice; García, Carmen; García Navarro, José Enrique; Gardner, Robert; Garelli, Nicoletta; Garitaonandia, Hegoi; Garonne, Vincent; Gatti, Claudio; Gaudio, Gabriella; Gaur, Bakul; Gauthier, Lea; Gauzzi, Paolo; Gavrilenko, Igor; Gay, Colin; Gaycken, Goetz; Gazis, Evangelos; Ge, Peng; Gecse, Zoltan; Gee, Norman; Geerts, Daniël Alphonsus Adrianus; Geich-Gimbel, Christoph; Gellerstedt, Karl; Gemme, Claudia; Gemmell, Alistair; Genest, Marie-Hélène; Gentile, Simonetta; George, Matthias; George, Simon; Gerbaudo, Davide; Gerlach, Peter; Gershon, Avi; Geweniger, Christoph; Ghazlane, Hamid; Ghodbane, Nabil; Giacobbe, Benedetto; Giagu, Stefano; Giangiobbe, Vincent; Gianotti, Fabiola; Gibbard, Bruce; Gibson, Adam; Gibson, Stephen; Gilchriese, Murdock; Gillberg, Dag; Gillman, Tony; Gingrich, Douglas; Ginzburg, Jonatan; Giokaris, Nikos; Giordani, MarioPaolo; Giordano, Raffaele; Giorgi, Francesco Michelangelo; Giovannini, Paola; Giraud, Pierre-Francois; Giugni, Danilo; Giunta, Michele; Gjelsten, Børge Kile; Gladilin, Leonid; Glasman, Claudia; Glatzer, Julian; Glazov, Alexandre; Glitza, Karl-Walter; Glonti, George; Goddard, Jack Robert; Godfrey, Jennifer; Godlewski, Jan; Goebel, Martin; Göpfert, Thomas; Goeringer, Christian; Gössling, Claus; Goldfarb, Steven; Golling, Tobias; Golubkov, Dmitry; Gomes, Agostinho; Gomez Fajardo, Luz Stella; Gonçalo, Ricardo; Goncalves Pinto Firmino Da Costa, Joao; Gonella, Laura; González de la Hoz, Santiago; Gonzalez Parra, Garoe; Gonzalez Silva, Laura; Gonzalez-Sevilla, Sergio; Goodson, Jeremiah Jet; Goossens, Luc; Gorbounov, Petr Andreevich; Gordon, Howard; Gorelov, Igor; Gorfine, Grant; Gorini, Benedetto; Gorini, Edoardo; Gorišek, Andrej; Gornicki, Edward; Goshaw, Alfred; Gosselink, Martijn; Gostkin, Mikhail Ivanovitch; Gough Eschrich, Ivo; Gouighri, Mohamed; Goujdami, Driss; Goulette, Marc Phillippe; Goussiou, Anna; Goy, Corinne; Gozpinar, Serdar; Grabowska-Bold, Iwona; Grafström, Per; Grahn, Karl-Johan; Gramstad, Eirik; Grancagnolo, Francesco; Grancagnolo, Sergio; Grassi, Valerio; Gratchev, Vadim; Grau, Nathan; Gray, Heather; Gray, Julia Ann; Graziani, Enrico; Grebenyuk, Oleg; Greenshaw, Timothy; Greenwood, Zeno Dixon; Gregersen, Kristian; Gregor, Ingrid-Maria; Grenier, Philippe; Griffiths, Justin; Grigalashvili, Nugzar; Grillo, Alexander; Grinstein, Sebastian; Gris, Philippe Luc Yves; Grishkevich, Yaroslav; Grivaz, Jean-Francois; Gross, Eilam; Grosse-Knetter, Joern; Groth-Jensen, Jacob; Grybel, Kai; Guest, Daniel; Guicheney, Christophe; Guido, Elisa; Guindon, Stefan; Gul, Umar; Gunther, Jaroslav; Guo, Bin; Guo, Jun; Gutierrez, Phillip; Guttman, Nir; Gutzwiller, Olivier; Guyot, Claude; Gwenlan, Claire; Gwilliam, Carl; Haas, Andy; Haas, Stefan; Haber, Carl; Hadavand, Haleh Khani; Hadley, David; Haefner, Petra; Hahn, Ferdinand; Hajduk, Zbigniew; Hakobyan, Hrachya; Hall, David; Hamacher, Klaus; Hamal, Petr; Hamano, Kenji; Hamer, Matthias; Hamilton, Andrew; Hamilton, Samuel; Han, Liang; Hanagaki, Kazunori; Hanawa, Keita; Hance, Michael; Handel, Carsten; Hanke, Paul; Hansen, John Renner; Hansen, Jørgen Beck; Hansen, Jorn Dines; Hansen, Peter Henrik; Hansson, Per; Hara, Kazuhiko; Harenberg, Torsten; Harkusha, Siarhei; Harper, Devin; Harrington, Robert; Harris, Orin; Hartert, Jochen; Hartjes, Fred; Haruyama, Tomiyoshi; Harvey, Alex; Hasegawa, Satoshi; Hasegawa, Yoji; Hassani, Samira; Haug, Sigve; Hauschild, Michael; Hauser, Reiner; Havranek, Miroslav; Hawkes, Christopher; Hawkings, Richard John; Hawkins, Anthony David; Hayakawa, Takashi; Hayashi, Takayasu; Hayden, Daniel; Hays, Chris; Hayward, Helen; Haywood, Stephen; Head, Simon; Hedberg, Vincent; Heelan, Louise; Heim, Sarah; Heinemann, Beate; Heisterkamp, Simon; Helary, Louis; Heller, Claudio; Heller, Matthieu; Hellman, Sten; Hellmich, Dennis; Helsens, Clement; Henderson, Robert; Henke, Michael; Henrichs, Anna; Henriques Correia, Ana Maria; Henrot-Versille, Sophie; Hensel, Carsten; Medina Hernandez, Carlos; Hernández Jiménez, Yesenia; Herrberg, Ruth; Herten, Gregor; Hertenberger, Ralf; Hervas, Luis; Hesketh, Gavin Grant; Hessey, Nigel; Higón-Rodriguez, Emilio; Hill, John; Hiller, Karl Heinz; Hillert, Sonja; Hillier, Stephen; Hinchliffe, Ian; Hines, Elizabeth; Hirose, Minoru; Hirsch, Florian; Hirschbuehl, Dominic; Hobbs, John; Hod, Noam; Hodgkinson, Mark; Hodgson, Paul; Hoecker, Andreas; Hoeferkamp, Martin; Hoffman, Julia; Hoffmann, Dirk; Hohlfeld, Marc; Holder, Martin; Holmgren, Sven-Olof; Holy, Tomas; Holzbauer, Jenny; Hong, Tae Min; Hooft van Huysduynen, Loek; Horner, Stephan; Hostachy, Jean-Yves; Hou, Suen; Hoummada, Abdeslam; Howard, Jacob; Howarth, James; Hristova, Ivana; Hrivnac, Julius; Hryn'ova, Tetiana; Hsu, Pai-hsien Jennifer; Hsu, Shih-Chieh; Hu, Diedi; Hubacek, Zdenek; Hubaut, Fabrice; Huegging, Fabian; Huettmann, Antje; Huffman, Todd Brian; Hughes, Emlyn; Hughes, Gareth; Huhtinen, Mika; Hurwitz, Martina; Huseynov, Nazim; Huston, Joey; Huth, John; Iacobucci, Giuseppe; Iakovidis, Georgios; Ibbotson, Michael; Ibragimov, Iskander; Iconomidou-Fayard, Lydia; Idarraga, John; Iengo, Paolo; Igonkina, Olga; Ikegami, Yoichi; Ikeno, Masahiro; Iliadis, Dimitrios; Ilic, Nikolina; Ince, Tayfun; Ioannou, Pavlos; Iodice, Mauro; Iordanidou, Kalliopi; Ippolito, Valerio; Irles Quiles, Adrian; Isaksson, Charlie; Ishino, Masaya; Ishitsuka, Masaki; Ishmukhametov, Renat; Issever, Cigdem; Istin, Serhat; Ivashin, Anton; Iwanski, Wieslaw; Iwasaki, Hiroyuki; Izen, Joseph; Izzo, Vincenzo; Jackson, Brett; Jackson, John; Jackson, Paul; Jaekel, Martin; Jain, Vivek; Jakobs, Karl; Jakobsen, Sune; Jakoubek, Tomas; Jakubek, Jan; Jamin, David Olivier; Jana, Dilip; Jansen, Eric; Jansen, Hendrik; Janssen, Jens; Jantsch, Andreas; Janus, Michel; Jared, Richard; Jarlskog, Göran; Jeanty, Laura; Jen-La Plante, Imai; Jennens, David; Jenni, Peter; Loevschall-Jensen, Ask Emil; Jež, Pavel; Jézéquel, Stéphane; Jha, Manoj Kumar; Ji, Haoshuang; Ji, Weina; Jia, Jiangyong; Jiang, Yi; Jimenez Belenguer, Marcos; Jin, Shan; Jinnouchi, Osamu; Joergensen, Morten Dam; Joffe, David; Johansen, Marianne; Johansson, Erik; Johansson, Per; Johnert, Sebastian; Johns, Kenneth; Jon-And, Kerstin; Jones, Graham; Jones, Roger; Jones, Tim; Joram, Christian; Jorge, Pedro; Joshi, Kiran Daniel; Jovicevic, Jelena; Jovin, Tatjana; Ju, Xiangyang; Jung, Christian; Jungst, Ralph Markus; Juranek, Vojtech; Jussel, Patrick; Juste Rozas, Aurelio; Kabana, Sonja; Kaci, Mohammed; Kaczmarska, Anna; Kadlecik, Peter; Kado, Marumi; Kagan, Harris; Kagan, Michael; Kajomovitz, Enrique; Kalinin, Sergey; Kalinovskaya, Lidia; Kama, Sami; Kanaya, Naoko; Kaneda, Michiru; Kaneti, Steven; Kanno, Takayuki; Kantserov, Vadim; Kanzaki, Junichi; Kaplan, Benjamin; Kapliy, Anton; Kaplon, Jan; Kar, Deepak; Karagounis, Michael; Karakostas, Konstantinos; Karnevskiy, Mikhail; Kartvelishvili, Vakhtang; Karyukhin, Andrey; Kashif, Lashkar; Kasieczka, Gregor; Kass, Richard; Kastanas, Alex; Kataoka, Mayuko; Kataoka, Yousuke; Katzy, Judith; Kaushik, Venkatesh; Kawagoe, Kiyotomo; Kawamoto, Tatsuo; Kawamura, Gen; Kayl, Manuel; Kazama, Shingo; Kazanin, Vassili; Kazarinov, Makhail; Keeler, Richard; Keener, Paul; Kehoe, Robert; Keil, Markus; Kekelidze, George; Keller, John; Kenyon, Mike; Kepka, Oldrich; Kerschen, Nicolas; Kerševan, Borut Paul; Kersten, Susanne; Kessoku, Kohei; Keung, Justin; Khalil-zada, Farkhad; Khandanyan, Hovhannes; Khanov, Alexander; Kharchenko, Dmitri; Khodinov, Alexander; Khomich, Andrei; Khoo, Teng Jian; Khoriauli, Gia; Khoroshilov, Andrey; Khovanskiy, Valery; Khramov, Evgeniy; Khubua, Jemal; Kim, Hyeon Jin; Kim, Shinhong; Kimura, Naoki; Kind, Oliver; King, Barry; King, Matthew; King, Robert Steven Beaufoy; Kirk, Julie; Kiryunin, Andrey; Kishimoto, Tomoe; Kisielewska, Danuta; Kitamura, Takumi; Kittelmann, Thomas; Kiuchi, Kenji; Kladiva, Eduard; Klein, Max; Klein, Uta; Kleinknecht, Konrad; Klemetti, Miika; Klier, Amit; Klimek, Pawel; Klimentov, Alexei; Klingenberg, Reiner; Klinger, Joel Alexander; Klinkby, Esben; Klioutchnikova, Tatiana; Klok, Peter; Klous, Sander; Kluge, Eike-Erik; Kluge, Thomas; Kluit, Peter; Kluth, Stefan; Kneringer, Emmerich; Knoops, Edith; Knue, Andrea; Ko, Byeong Rok; Kobayashi, Tomio; Kobel, Michael; Kocian, Martin; Kodys, Peter; Köneke, Karsten; König, Adriaan; Koenig, Sebastian; Köpke, Lutz; Koetsveld, Folkert; Koevesarki, Peter; Koffas, Thomas; Koffeman, Els; Kogan, Lucy Anne; Kohlmann, Simon; Kohn, Fabian; Kohout, Zdenek; Kohriki, Takashi; Koi, Tatsumi; Kolachev, Guennady; Kolanoski, Hermann; Kolesnikov, Vladimir; Koletsou, Iro; Koll, James; Komar, Aston; Komori, Yuto; Kondo, Takahiko; Kono, Takanori; Kononov, Anatoly; Konoplich, Rostislav; Konstantinidis, Nikolaos; Kopeliansky, Revital; Koperny, Stefan; Korcyl, Krzysztof; Kordas, Kostantinos; Korn, Andreas; Korol, Aleksandr; Korolkov, Ilya; Korolkova, Elena; Korotkov, Vladislav; Kortner, Oliver; Kortner, Sandra; Kostyukhin, Vadim; Kotov, Sergey; Kotov, Vladislav; Kotwal, Ashutosh; Kourkoumelis, Christine; Kouskoura, Vasiliki; Koutsman, Alex; Kowalewski, Robert Victor; Kowalski, Tadeusz; Kozanecki, Witold; Kozhin, Anatoly; Kral, Vlastimil; Kramarenko, Viktor; Kramberger, Gregor; Krasny, Mieczyslaw Witold; Krasznahorkay, Attila; Kraus, Jana; Kravchenko, Anton; Kreiss, Sven; Krejci, Frantisek; Kretzschmar, Jan; Kreutzfeldt, Kristof; Krieger, Nina; Krieger, Peter; Kroeninger, Kevin; Kroha, Hubert; Kroll, Joe; Kroseberg, Juergen; Krstic, Jelena; Kruchonak, Uladzimir; Krüger, Hans; Kruker, Tobias; Krumnack, Nils; Krumshteyn, Zinovii; Kruse, Mark; Kubota, Takashi; Kuday, Sinan; Kuehn, Susanne; Kugel, Andreas; Kuhl, Thorsten; Kuhn, Dietmar; Kukhtin, Victor; Kulchitsky, Yuri; Kuleshov, Sergey; Kummer, Christian; Kuna, Marine; Kunkle, Joshua; Kupco, Alexander; Kurashige, Hisaya; Kurata, Masakazu; Kurochkin, Yurii; Kus, Vlastimil; Kuwertz, Emma Sian; Kuze, Masahiro; Kvita, Jiri; Kwee, Regina; La Rosa, Alessandro; La Rotonda, Laura; Labarga, Luis; Lablak, Said; Lacasta, Carlos; Lacava, Francesco; Lacey, James; Lacker, Heiko; Lacour, Didier; Lacuesta, Vicente Ramón; Ladygin, Evgueni; Lafaye, Remi; Laforge, Bertrand; Lagouri, Theodota; Lai, Stanley; Laisne, Emmanuel; Lambourne, Luke; Lampen, Caleb; Lampl, Walter; Lancon, Eric; Landgraf, Ulrich; Landon, Murrough; Lang, Valerie Susanne; Lange, Clemens; Lankford, Andrew; Lanni, Francesco; Lantzsch, Kerstin; Lanza, Agostino; Laplace, Sandrine; Lapoire, Cecile; Laporte, Jean-Francois; Lari, Tommaso; Larner, Aimee; Lassnig, Mario; Laurelli, Paolo; Lavorini, Vincenzo; Lavrijsen, Wim; Laycock, Paul; Le Dortz, Olivier; Le Guirriec, Emmanuel; Le Menedeu, Eve; LeCompte, Thomas; Ledroit-Guillon, Fabienne Agnes Marie; Lee, Hurng-Chun; Lee, Jason; Lee, Shih-Chang; Lee, Lawrence; Lefebvre, Michel; Legendre, Marie; Legger, Federica; Leggett, Charles; Lehmacher, Marc; Lehmann Miotto, Giovanna; Leister, Andrew Gerard; Leite, Marco Aurelio Lisboa; Leitner, Rupert; Lellouch, Daniel; Lemmer, Boris; Lendermann, Victor; Leney, Katharine; Lenz, Tatiana; Lenzen, Georg; Lenzi, Bruno; Leonhardt, Kathrin; Leontsinis, Stefanos; Lepold, Florian; Leroy, Claude; Lessard, Jean-Raphael; Lester, Christopher; Lester, Christopher Michael; Levêque, Jessica; Levin, Daniel; Levinson, Lorne; Lewis, Adrian; Lewis, George; Leyko, Agnieszka; Leyton, Michael; Li, Bing; Li, Bo; Li, Haifeng; Li, Ho Ling; Li, Shu; Li, Xuefei; Liang, Zhijun; Liao, Hongbo; Liberti, Barbara; Lichard, Peter; Lichtnecker, Markus; Lie, Ki; Liebig, Wolfgang; Limbach, Christian; Limosani, Antonio; Limper, Maaike; Lin, Simon; Linde, Frank; Linnemann, James; Lipeles, Elliot; Lipniacka, Anna; Liss, Tony; Lissauer, David; Lister, Alison; Litke, Alan; Liu, Chuanlei; Liu, Dong; Liu, Jianbei; Liu, Lulu; Liu, Minghui; Liu, Yanwen; Livan, Michele; Livermore, Sarah; Lleres, Annick; Llorente Merino, Javier; Lloyd, Stephen; Lobodzinska, Ewelina; Loch, Peter; Lockman, William; Loddenkoetter, Thomas; Loebinger, Fred; Loginov, Andrey; Loh, Chang Wei; Lohse, Thomas; Lohwasser, Kristin; Lokajicek, Milos; Lombardo, Vincenzo Paolo; Long, Robin Eamonn; Lopes, Lourenco; Lopez Mateos, David; Lorenz, Jeanette; Lorenzo Martinez, Narei; Losada, Marta; Loscutoff, Peter; Lo Sterzo, Francesco; Losty, Michael; Lou, XinChou; Lounis, Abdenour; Loureiro, Karina; Love, Jeremy; Love, Peter; Lowe, Andrew; Lu, Feng; Lubatti, Henry; Luci, Claudio; Lucotte, Arnaud; Ludwig, Andreas; Ludwig, Dörthe; Ludwig, Inga; Ludwig, Jens; Luehring, Frederick; Luijckx, Guy; Lukas, Wolfgang; Luminari, Lamberto; Lund, Esben; Lund-Jensen, Bengt; Lundberg, Björn; Lundberg, Johan; Lundberg, Olof; Lundquist, Johan; Lungwitz, Matthias; Lynn, David; Lytken, Else; Ma, Hong; Ma, Lian Liang; Maccarrone, Giovanni; Macchiolo, Anna; Maček, Boštjan; Machado Miguens, Joana; Macina, Daniela; Mackeprang, Rasmus; Madaras, Ronald; Maddocks, Harvey Jonathan; Mader, Wolfgang; Maenner, Reinhard; Maeno, Tadashi; Mättig, Peter; Mättig, Stefan; Magnoni, Luca; Magradze, Erekle; Mahboubi, Kambiz; Mahlstedt, Joern; Mahmoud, Sara; Mahout, Gilles; Maiani, Camilla; Maidantchik, Carmen; Maio, Amélia; Majewski, Stephanie; Makida, Yasuhiro; Makovec, Nikola; Mal, Prolay; Malaescu, Bogdan; Malecki, Pawel; Malecki, Piotr; Maleev, Victor; Malek, Fairouz; Mallik, Usha; Malon, David; Malone, Caitlin; Maltezos, Stavros; Malyshev, Vladimir; Malyukov, Sergei; Mamuzic, Judita; Manabe, Atsushi; Mandelli, Luciano; Mandić, Igor; Mandrysch, Rocco; Maneira, José; Manfredini, Alessandro; Manhaes de Andrade Filho, Luciano; Manjarres Ramos, Joany Andreina; Mann, Alexander; Manning, Peter; Manousakis-Katsikakis, Arkadios; Mansoulie, Bruno; Mapelli, Alessandro; Mapelli, Livio; March, Luis; Marchand, Jean-Francois; Marchese, Fabrizio; Marchiori, Giovanni; Marcisovsky, Michal; Marino, Christopher; Marroquim, Fernando; Marshall, Zach; Marti, Lukas Fritz; Marti-Garcia, Salvador; Martin, Brian; Martin, Brian Thomas; Martin, Jean-Pierre; Martin, Tim; Martin, Victoria Jane; Martin dit Latour, Bertrand; Martin-Haugh, Stewart; Martinez, Mario; Martinez Outschoorn, Verena; Martyniuk, Alex; Marx, Marilyn; Marzano, Francesco; Marzin, Antoine; Masetti, Lucia; Mashimo, Tetsuro; Mashinistov, Ruslan; Masik, Jiri; Maslennikov, Alexey; Massa, Ignazio; Massaro, Graziano; Massol, Nicolas; Mastrandrea, Paolo; Mastroberardino, Anna; Masubuchi, Tatsuya; Matsunaga, Hiroyuki; Matsushita, Takashi; Mattravers, Carly; Maurer, Julien; Maxfield, Stephen; Maximov, Dmitriy; Mayne, Anna; Mazini, Rachid; Mazur, Michael; Mazzaferro, Luca; Mazzanti, Marcello; Mc Donald, Jeffrey; Mc Kee, Shawn Patrick; McCarn, Allison; McCarthy, Robert; McCarthy, Tom; McCubbin, Norman; McFarlane, Kenneth; Mcfayden, Josh; Mchedlidze, Gvantsa; Mclaughlan, Tom; McMahon, Steve; McPherson, Robert; Meade, Andrew; Mechnich, Joerg; Mechtel, Markus; Medinnis, Mike; Meehan, Samuel; Meera-Lebbai, Razzak; Meguro, Tatsuma; Mehlhase, Sascha; Mehta, Andrew; Meier, Karlheinz; Meirose, Bernhard; Melachrinos, Constantinos; Mellado Garcia, Bruce Rafael; Meloni, Federico; Mendoza Navas, Luis; Meng, Zhaoxia; Mengarelli, Alberto; Menke, Sven; Meoni, Evelin; Mercurio, Kevin Michael; Mermod, Philippe; Merola, Leonardo; Meroni, Chiara; Merritt, Frank; Merritt, Hayes; Messina, Andrea; Metcalfe, Jessica; Mete, Alaettin Serhan; Meyer, Carsten; Meyer, Christopher; Meyer, Jean-Pierre; Meyer, Jochen; Meyer, Joerg; Michal, Sebastien; Micu, Liliana; Middleton, Robin; Migas, Sylwia; Mijović, Liza; Mikenberg, Giora; Mikestikova, Marcela; Mikuž, Marko; Miller, David; Miller, Robert; Mills, Bill; Mills, Corrinne; Milov, Alexander; Milstead, David; Milstein, Dmitry; Minaenko, Andrey; Miñano Moya, Mercedes; Minashvili, Irakli; Mincer, Allen; Mindur, Bartosz; Mineev, Mikhail; Ming, Yao; Mir, Lluisa-Maria; Mirabelli, Giovanni; Mitrevski, Jovan; Mitsou, Vasiliki A; Mitsui, Shingo; Miyagawa, Paul; Mjörnmark, Jan-Ulf; Moa, Torbjoern; Moeller, Victoria; Mönig, Klaus; Möser, Nicolas; Mohapatra, Soumya; Mohr, Wolfgang; Moles-Valls, Regina; Molfetas, Angelos; Monk, James; Monnier, Emmanuel; Montejo Berlingen, Javier; Monticelli, Fernando; Monzani, Simone; Moore, Roger; Moorhead, Gareth; Mora Herrera, Clemencia; Moraes, Arthur; Morange, Nicolas; Morel, Julien; Morello, Gianfranco; Moreno, Deywis; Moreno Llácer, María; Morettini, Paolo; Morgenstern, Marcus; Morii, Masahiro; Morley, Anthony Keith; Mornacchi, Giuseppe; Morris, John; Morvaj, Ljiljana; Moser, Hans-Guenther; Mosidze, Maia; Moss, Josh; Mount, Richard; Mountricha, Eleni; Mouraviev, Sergei; Moyse, Edward; Mueller, Felix; Mueller, James; Mueller, Klemens; Müller, Thomas; Mueller, Timo; Muenstermann, Daniel; Munwes, Yonathan; Murray, Bill; Mussche, Ido; Musto, Elisa; Myagkov, Alexey; Myska, Miroslav; Nackenhorst, Olaf; Nadal, Jordi; Nagai, Koichi; Nagai, Ryo; Nagano, Kunihiro; Nagarkar, Advait; Nagasaka, Yasushi; Nagel, Martin; Nairz, Armin Michael; Nakahama, Yu; Nakamura, Koji; Nakamura, Tomoaki; Nakano, Itsuo; Nanava, Gizo; Napier, Austin; Narayan, Rohin; Nash, Michael; Nattermann, Till; Naumann, Thomas; Navarro, Gabriela; Neal, Homer; Nechaeva, Polina; Neep, Thomas James; Negri, Andrea; Negri, Guido; Negrini, Matteo; Nektarijevic, Snezana; Nelson, Andrew; Nelson, Timothy Knight; Nemecek, Stanislav; Nemethy, Peter; Nepomuceno, Andre Asevedo; Nessi, Marzio; Neubauer, Mark; Neumann, Manuel; Neusiedl, Andrea; Neves, Ricardo; Nevski, Pavel; Newcomer, Mitchel; Newman, Paul; Nguyen Thi Hong, Van; Nickerson, Richard; Nicolaidou, Rosy; Nicquevert, Bertrand; Niedercorn, Francois; Nielsen, Jason; Nikiforou, Nikiforos; Nikiforov, Andriy; Nikolaenko, Vladimir; Nikolic-Audit, Irena; Nikolics, Katalin; Nikolopoulos, Konstantinos; Nilsen, Henrik; Nilsson, Paul; Ninomiya, Yoichi; Nisati, Aleandro; Nisius, Richard; Nobe, Takuya; Nodulman, Lawrence; Nomachi, Masaharu; Nomidis, Ioannis; Norberg, Scarlet; Nordberg, Markus; Norton, Peter; Novakova, Jana; Nozaki, Mitsuaki; Nozka, Libor; Nugent, Ian Michael; Nuncio-Quiroz, Adriana-Elizabeth; Nunes Hanninger, Guilherme; Nunnemann, Thomas; Nurse, Emily; O'Brien, Brendan Joseph; O'Neil, Dugan; O'Shea, Val; Oakes, Louise Beth; Oakham, Gerald; Oberlack, Horst; Ocariz, Jose; Ochi, Atsuhiko; Oda, Susumu; Odaka, Shigeru; Odier, Jerome; Ogren, Harold; Oh, Alexander; Oh, Seog; Ohm, Christian; Ohshima, Takayoshi; Okamura, Wataru; Okawa, Hideki; Okumura, Yasuyuki; Okuyama, Toyonobu; Olariu, Albert; Olchevski, Alexander; Olivares Pino, Sebastian Andres; Oliveira, Miguel Alfonso; Oliveira Damazio, Denis; Oliver Garcia, Elena; Olivito, Dominick; Olszewski, Andrzej; Olszowska, Jolanta; Onofre, António; Onyisi, Peter; Oram, Christopher; Oreglia, Mark; Oren, Yona; Orestano, Domizia; Orlando, Nicola; Orlov, Iliya; Oropeza Barrera, Cristina; Orr, Robert; Osculati, Bianca; Ospanov, Rustem; Osuna, Carlos; Otero y Garzon, Gustavo; Ottersbach, John; Ouchrif, Mohamed; Ouellette, Eric; Ould-Saada, Farid; Ouraou, Ahmimed; Ouyang, Qun; Ovcharova, Ana; Owen, Mark; Owen, Simon; Ozcan, Veysi Erkcan; Ozturk, Nurcan; Pacheco Pages, Andres; Padilla Aranda, Cristobal; Pagan Griso, Simone; Paganis, Efstathios; Pahl, Christoph; Paige, Frank; Pais, Preema; Pajchel, Katarina; Palacino, Gabriel; Paleari, Chiara; Palestini, Sandro; Pallin, Dominique; Palma, Alberto; Palmer, Jody; Pan, Yibin; Panagiotopoulou, Evgenia; Panduro Vazquez, William; Pani, Priscilla; Panikashvili, Natalia; Panitkin, Sergey; Pantea, Dan; Papadelis, Aras; Papadopoulou, Theodora; Paramonov, Alexander; Paredes Hernandez, Daniela; Park, Woochun; Parker, Andy; Parodi, Fabrizio; Parsons, John; Parzefall, Ulrich; Pashapour, Shabnaz; Pasqualucci, Enrico; Passaggio, Stefano; Passeri, Antonio; Pastore, Fernanda; Pastore, Francesca; Pásztor, Gabriella; Pataraia, Sophio; Patel, Nikhul; Pater, Joleen; Patricelli, Sergio; Pauly, Thilo; Pecsy, Martin; Pedraza Lopez, Sebastian; Pedraza Morales, Maria Isabel; Peleganchuk, Sergey; Pelikan, Daniel; Peng, Haiping; Penning, Bjoern; Penson, Alexander; Penwell, John; Perantoni, Marcelo; Perez, Kerstin; Perez Cavalcanti, Tiago; Perez Codina, Estel; Pérez García-Estañ, María Teresa; Perez Reale, Valeria; Perini, Laura; Pernegger, Heinz; Perrino, Roberto; Perrodo, Pascal; Peshekhonov, Vladimir; Peters, Krisztian; Petersen, Brian; Petersen, Jorgen; Petersen, Troels; Petit, Elisabeth; Petridis, Andreas; Petridou, Chariclia; Petrolo, Emilio; Petrucci, Fabrizio; Petschull, Dennis; Petteni, Michele; Pezoa, Raquel; Phan, Anna; Phillips, Peter William; Piacquadio, Giacinto; Picazio, Attilio; Piccaro, Elisa; Piccinini, Maurizio; Piec, Sebastian Marcin; Piegaia, Ricardo; Pignotti, David; Pilcher, James; Pilkington, Andrew; Pina, João Antonio; Pinamonti, Michele; Pinder, Alex; Pinfold, James; Pingel, Almut; Pinto, Belmiro; Pizio, Caterina; Pleier, Marc-Andre; Plotnikova, Elena; Poblaguev, Andrei; Poddar, Sahill; Podlyski, Fabrice; Poggioli, Luc; Pohl, David-leon; Pohl, Martin; Polesello, Giacomo; Policicchio, Antonio; Polini, Alessandro; Poll, James; Polychronakos, Venetios; Pomeroy, Daniel; Pommès, Kathy; Pontecorvo, Ludovico; Pope, Bernard; Popeneciu, Gabriel Alexandru; Popovic, Dragan; Poppleton, Alan; Portell Bueso, Xavier; Pospelov, Guennady; Pospisil, Stanislav; Potrap, Igor; Potter, Christina; Potter, Christopher; Poulard, Gilbert; Poveda, Joaquin; Pozdnyakov, Valery; Prabhu, Robindra; Pralavorio, Pascal; Pranko, Aliaksandr; Prasad, Srivas; Pravahan, Rishiraj; Prell, Soeren; Pretzl, Klaus Peter; Price, Darren; Price, Joe; Price, Lawrence; Prieur, Damien; Primavera, Margherita; Prokofiev, Kirill; Prokoshin, Fedor; Protopopescu, Serban; Proudfoot, James; Prudent, Xavier; Przybycien, Mariusz; Przysiezniak, Helenka; Psoroulas, Serena; Ptacek, Elizabeth; Pueschel, Elisa; Purdham, John; Purohit, Milind; Puzo, Patrick; Pylypchenko, Yuriy; Qian, Jianming; Quadt, Arnulf; Quarrie, David; Quayle, William; Raas, Marcel; Radeka, Veljko; Radescu, Voica; Radloff, Peter; Ragusa, Francesco; Rahal, Ghita; Rahimi, Amir; Rahm, David; Rajagopalan, Srinivasan; Rammensee, Michael; Rammes, Marcus; Randle-Conde, Aidan Sean; Randrianarivony, Koloina; Rao, Kanury; Rauscher, Felix; Rave, Tobias Christian; Raymond, Michel; Read, Alexander Lincoln; Rebuzzi, Daniela; Redelbach, Andreas; Redlinger, George; Reece, Ryan; Reeves, Kendall; Reinsch, Andreas; Reisinger, Ingo; Rembser, Christoph; Ren, Zhongliang; Renaud, Adrien; Rescigno, Marco; Resconi, Silvia; Resende, Bernardo; Reznicek, Pavel; Rezvani, Reyhaneh; Richter, Robert; Richter-Was, Elzbieta; Ridel, Melissa; Rijpstra, Manouk; Rijssenbeek, Michael; Rimoldi, Adele; Rinaldi, Lorenzo; Rios, Ryan Randy; Riu, Imma; Rivoltella, Giancesare; Rizatdinova, Flera; Rizvi, Eram; Robertson, Steven; Robichaud-Veronneau, Andree; Robinson, Dave; Robinson, James; Robson, Aidan; Rocha de Lima, Jose Guilherme; Roda, Chiara; Roda Dos Santos, Denis; Roe, Adam; Roe, Shaun; Røhne, Ole; Rolli, Simona; Romaniouk, Anatoli; Romano, Marino; Romeo, Gaston; Romero Adam, Elena; Rompotis, Nikolaos; Roos, Lydia; Ros, Eduardo; Rosati, Stefano; Rosbach, Kilian; Rose, Anthony; Rose, Matthew; Rosenbaum, Gabriel; Rosenberg, Eli; Rosendahl, Peter Lundgaard; Rosenthal, Oliver; Rosselet, Laurent; Rossetti, Valerio; Rossi, Elvira; Rossi, Leonardo Paolo; Rotaru, Marina; Roth, Itamar; Rothberg, Joseph; Rousseau, David; Royon, Christophe; Rozanov, Alexandre; Rozen, Yoram; Ruan, Xifeng; Rubbo, Francesco; Rubinskiy, Igor; Ruckstuhl, Nicole; Rud, Viacheslav; Rudolph, Christian; Rudolph, Gerald; Rühr, Frederik; Ruiz-Martinez, Aranzazu; Rumyantsev, Leonid; Rurikova, Zuzana; Rusakovich, Nikolai; Ruschke, Alexander; Rutherfoord, John; Ruzicka, Pavel; Ryabov, Yury; Rybar, Martin; Rybkin, Grigori; Ryder, Nick; Saavedra, Aldo; Sadeh, Iftach; Sadrozinski, Hartmut; Sadykov, Renat; Safai Tehrani, Francesco; Sakamoto, Hiroshi; Salamanna, Giuseppe; Salamon, Andrea; Saleem, Muhammad; Salek, David; Salihagic, Denis; Salnikov, Andrei; Salt, José; Salvachua Ferrando, Belén; Salvatore, Daniela; Salvatore, Pasquale Fabrizio; Salvucci, Antonio; Salzburger, Andreas; Sampsonidis, Dimitrios; Samset, Björn Hallvard; Sanchez, Arturo; Sanchez Martinez, Victoria; Sandaker, Heidi; Sander, Heinz Georg; Sanders, Michiel; Sandhoff, Marisa; Sandoval, Tanya; Sandoval, Carlos; Sandstroem, Rikard; Sankey, Dave; Sansoni, Andrea; Santamarina Rios, Cibran; Santoni, Claudio; Santonico, Rinaldo; Santos, Helena; Santoyo Castillo, Itzebelt; Saraiva, João; Sarangi, Tapas; Sarkisyan-Grinbaum, Edward; Sarrazin, Bjorn; Sarri, Francesca; Sartisohn, Georg; Sasaki, Osamu; Sasaki, Yuichi; Sasao, Noboru; Satsounkevitch, Igor; Sauvage, Gilles; Sauvan, Emmanuel; Sauvan, Jean-Baptiste; Savard, Pierre; Savinov, Vladimir; Savu, Dan Octavian; Sawyer, Lee; Saxon, David; Saxon, James; Sbarra, Carla; Sbrizzi, Antonio; Scannicchio, Diana; Scarcella, Mark; Schaarschmidt, Jana; Schacht, Peter; Schaefer, Douglas; Schäfer, Uli; Schaelicke, Andreas; Schaepe, Steffen; Schaetzel, Sebastian; Schaffer, Arthur; Schaile, Dorothee; Schamberger, R. Dean; Schamov, Andrey; Scharf, Veit; Schegelsky, Valery; Scheirich, Daniel; Schernau, Michael; Scherzer, Max; Schiavi, Carlo; Schieck, Jochen; Schioppa, Marco; Schlenker, Stefan; Schmidt, Evelyn; Schmieden, Kristof; Schmitt, Christian; Schmitt, Sebastian; Schneider, Basil; Schnoor, Ulrike; Schoeffel, Laurent; Schoening, Andre; Schorlemmer, Andre Lukas; Schott, Matthias; Schouten, Doug; Schovancova, Jaroslava; Schram, Malachi; Schroeder, Christian; Schroer, Nicolai; Schultens, Martin Johannes; Schultes, Joachim; Schultz-Coulon, Hans-Christian; Schulz, Holger; Schumacher, Markus; Schumm, Bruce; Schune, Philippe; Schwartzman, Ariel; Schwegler, Philipp; Schwemling, Philippe; Schwienhorst, Reinhard; Schwierz, Rainer; Schwindling, Jerome; Schwindt, Thomas; Schwoerer, Maud; Sciacca, Gianfranco; Sciolla, Gabriella; Scott, Bill; Searcy, Jacob; Sedov, George; Sedykh, Evgeny; Seidel, Sally; Seiden, Abraham; Seifert, Frank; Seixas, José; Sekhniaidze, Givi; Sekula, Stephen; Selbach, Karoline Elfriede; Seliverstov, Dmitry; Sellden, Bjoern; Sellers, Graham; Seman, Michal; Semprini-Cesari, Nicola; Serfon, Cedric; Serin, Laurent; Serkin, Leonid; Seuster, Rolf; Severini, Horst; Sfyrla, Anna; Shabalina, Elizaveta; Shamim, Mansoora; Shan, Lianyou; Shank, James; Shao, Qi Tao; Shapiro, Marjorie; Shatalov, Pavel; Shaw, Kate; Sherman, Daniel; Sherwood, Peter; Shimizu, Shima; Shimojima, Makoto; Shin, Taeksu; Shiyakova, Mariya; Shmeleva, Alevtina; Shochet, Mel; Short, Daniel; Shrestha, Suyog; Shulga, Evgeny; Shupe, Michael; Sicho, Petr; Sidoti, Antonio; Siegert, Frank; Sijacki, Djordje; Silbert, Ohad; Silva, José; Silver, Yiftah; Silverstein, Daniel; Silverstein, Samuel; Simak, Vladislav; Simard, Olivier; Simic, Ljiljana; Simion, Stefan; Simioni, Eduard; Simmons, Brinick; Simoniello, Rosa; Simonyan, Margar; Sinervo, Pekka; Sinev, Nikolai; Sipica, Valentin; Siragusa, Giovanni; Sircar, Anirvan; Sisakyan, Alexei; Sivoklokov, Serguei; Sjölin, Jörgen; Sjursen, Therese; Skinnari, Louise Anastasia; Skottowe, Hugh Philip; Skovpen, Kirill; Skubic, Patrick; Slater, Mark; Slavicek, Tomas; Sliwa, Krzysztof; Smakhtin, Vladimir; Smart, Ben; Smestad, Lillian; Smirnov, Sergei; Smirnov, Yury; Smirnova, Lidia; Smirnova, Oxana; Smith, Ben Campbell; Smith, Douglas; Smith, Kenway; Smizanska, Maria; Smolek, Karel; Snesarev, Andrei; Snow, Steve; Snow, Joel; Snyder, Scott; Sobie, Randall; Sodomka, Jaromir; Soffer, Abner; Solans, Carlos; Solar, Michael; Solc, Jaroslav; Soldatov, Evgeny; Soldevila, Urmila; Solfaroli Camillocci, Elena; Solodkov, Alexander; Solovyanov, Oleg; Solovyev, Victor; Soni, Nitesh; Sood, Alexander; Sopko, Vit; Sopko, Bruno; Sosebee, Mark; Soualah, Rachik; Soueid, Paul; Soukharev, Andrey; Spagnolo, Stefania; Spanò, Francesco; Spighi, Roberto; Spigo, Giancarlo; Spiwoks, Ralf; Spousta, Martin; Spreitzer, Teresa; Spurlock, Barry; St Denis, Richard Dante; Stahlman, Jonathan; Stamen, Rainer; Stanecka, Ewa; Stanek, Robert; Stanescu, Cristian; Stanescu-Bellu, Madalina; Stanitzki, Marcel Michael; Stapnes, Steinar; Starchenko, Evgeny; Stark, Jan; Staroba, Pavel; Starovoitov, Pavel; Staszewski, Rafal; Staude, Arnold; Stavina, Pavel; Steele, Genevieve; Steinbach, Peter; Steinberg, Peter; Stekl, Ivan; Stelzer, Bernd; Stelzer, Harald Joerg; Stelzer-Chilton, Oliver; Stenzel, Hasko; Stern, Sebastian; Stewart, Graeme; Stillings, Jan Andre; Stockton, Mark; Stoerig, Kathrin; Stoicea, Gabriel; Stonjek, Stefan; Strachota, Pavel; Stradling, Alden; Straessner, Arno; Strandberg, Jonas; Strandberg, Sara; Strandlie, Are; Strang, Michael; Strauss, Emanuel; Strauss, Michael; Strizenec, Pavol; Ströhmer, Raimund; Strom, David; Strong, John; Stroynowski, Ryszard; Stugu, Bjarne; Stumer, Iuliu; Stupak, John; Sturm, Philipp; Styles, Nicholas Adam; Soh, Dart-yin; Su, Dong; Subramania, Halasya Siva; Subramaniam, Rajivalochan; Succurro, Antonella; Sugaya, Yorihito; Suhr, Chad; Suk, Michal; Sulin, Vladimir; Sultansoy, Saleh; Sumida, Toshi; Sun, Xiaohu; Sundermann, Jan Erik; Suruliz, Kerim; Susinno, Giancarlo; Sutton, Mark; Suzuki, Yu; Suzuki, Yuta; Svatos, Michal; Swedish, Stephen; Sykora, Ivan; Sykora, Tomas; Sánchez, Javier; Ta, Duc; Tackmann, Kerstin; Taffard, Anyes; Tafirout, Reda; Taiblum, Nimrod; Takahashi, Yuta; Takai, Helio; Takashima, Ryuichi; Takeda, Hiroshi; Takeshita, Tohru; Takubo, Yosuke; Talby, Mossadek; Talyshev, Alexey; Tamsett, Matthew; Tan, Kong Guan; Tanaka, Junichi; Tanaka, Reisaburo; Tanaka, Satoshi; Tanaka, Shuji; Tanasijczuk, Andres Jorge; Tani, Kazutoshi; Tannoury, Nancy; Tapprogge, Stefan; Tardif, Dominique; Tarem, Shlomit; Tarrade, Fabien; Tartarelli, Giuseppe Francesco; Tas, Petr; Tasevsky, Marek; Tassi, Enrico; Tayalati, Yahya; Taylor, Christopher; Taylor, Frank; Taylor, Geoffrey; Taylor, Wendy; Teinturier, Marthe; Teischinger, Florian Alfred; Teixeira Dias Castanheira, Matilde; Teixeira-Dias, Pedro; Temming, Kim Katrin; Ten Kate, Herman; Teng, Ping-Kun; Terada, Susumu; Terashi, Koji; Terron, Juan; Testa, Marianna; Teuscher, Richard; Therhaag, Jan; Theveneaux-Pelzer, Timothée; Thoma, Sascha; Thomas, Juergen; Thompson, Emily; Thompson, Paul; Thompson, Peter; Thompson, Stan; Thomsen, Lotte Ansgaard; Thomson, Evelyn; Thomson, Mark; Thong, Wai Meng; Thun, Rudolf; Tian, Feng; Tibbetts, Mark James; Tic, Tomáš; Tikhomirov, Vladimir; Tikhonov, Yury; Timoshenko, Sergey; Tiouchichine, Elodie; Tipton, Paul; Tisserant, Sylvain; Todorov, Theodore; Todorova-Nova, Sharka; Toggerson, Brokk; Tojo, Junji; Tokár, Stanislav; Tokushuku, Katsuo; Tollefson, Kirsten; Tomoto, Makoto; Tompkins, Lauren; Toms, Konstantin; Tonoyan, Arshak; Topfel, Cyril; Topilin, Nikolai; Torrence, Eric; Torres, Heberth; Torró Pastor, Emma; Toth, Jozsef; Touchard, Francois; Tovey, Daniel; Trefzger, Thomas; Tremblet, Louis; Tricoli, Alesandro; Trigger, Isabel Marian; Trincaz-Duvoid, Sophie; Tripiana, Martin; Triplett, Nathan; Trischuk, William; Trocmé, Benjamin; Troncon, Clara; Trottier-McDonald, Michel; True, Patrick; Trzebinski, Maciej; Trzupek, Adam; Tsarouchas, Charilaos; Tseng, Jeffrey; Tsiakiris, Menelaos; Tsiareshka, Pavel; Tsionou, Dimitra; Tsipolitis, Georgios; Tsiskaridze, Shota; Tsiskaridze, Vakhtang; Tskhadadze, Edisher; Tsukerman, Ilya; Tsulaia, Vakhtang; Tsung, Jieh-Wen; Tsuno, Soshi; Tsybychev, Dmitri; Tua, Alan; Tudorache, Alexandra; Tudorache, Valentina; Tuggle, Joseph; Turala, Michal; Turecek, Daniel; Turk Cakir, Ilkay; Turlay, Emmanuel; Turra, Ruggero; Tuts, Michael; Tykhonov, Andrii; Tylmad, Maja; Tyndel, Mike; Tzanakos, George; Uchida, Kirika; Ueda, Ikuo; Ueno, Ryuichi; Ughetto, Michael; Ugland, Maren; Uhlenbrock, Mathias; Uhrmacher, Michael; Ukegawa, Fumihiko; Unal, Guillaume; Undrus, Alexander; Unel, Gokhan; Unno, Yoshinobu; Urbaniec, Dustin; Urquijo, Phillip; Usai, Giulio; Uslenghi, Massimiliano; Vacavant, Laurent; Vacek, Vaclav; Vachon, Brigitte; Vahsen, Sven; Valenta, Jan; Valentinetti, Sara; Valero, Alberto; Valkar, Stefan; Valladolid Gallego, Eva; Vallecorsa, Sofia; Valls Ferrer, Juan Antonio; Van Berg, Richard; Van Der Deijl, Pieter; van der Geer, Rogier; van der Graaf, Harry; Van Der Leeuw, Robin; van der Poel, Egge; van der Ster, Daniel; van Eldik, Niels; van Gemmeren, Peter; Van Nieuwkoop, Jacobus; van Vulpen, Ivo; Vanadia, Marco; Vandelli, Wainer; Vaniachine, Alexandre; Vankov, Peter; Vannucci, Francois; Vari, Riccardo; Varnes, Erich; Varol, Tulin; Varouchas, Dimitris; Vartapetian, Armen; Varvell, Kevin; Vassilakopoulos, Vassilios; Vazeille, Francois; Vazquez Schroeder, Tamara; Vegni, Guido; Veillet, Jean-Jacques; Veloso, Filipe; Veness, Raymond; Veneziano, Stefano; Ventura, Andrea; Ventura, Daniel; Venturi, Manuela; Venturi, Nicola; Vercesi, Valerio; Verducci, Monica; Verkerke, Wouter; Vermeulen, Jos; Vest, Anja; Vetterli, Michel; Vichou, Irene; Vickey, Trevor; Vickey Boeriu, Oana Elena; Viehhauser, Georg; Viel, Simon; Villa, Mauro; Villaplana Perez, Miguel; Vilucchi, Elisabetta; Vincter, Manuella; Vinek, Elisabeth; Vinogradov, Vladimir; Virchaux, Marc; Virzi, Joseph; Vitells, Ofer; Viti, Michele; Vivarelli, Iacopo; Vives Vaque, Francesc; Vlachos, Sotirios; Vladoiu, Dan; Vlasak, Michal; Vogel, Adrian; Vokac, Petr; Volpi, Guido; Volpi, Matteo; Volpini, Giovanni; von der Schmitt, Hans; von Radziewski, Holger; von Toerne, Eckhard; Vorobel, Vit; Vorwerk, Volker; Vos, Marcel; Voss, Rudiger; Vossebeld, Joost; Vranjes, Nenad; Vranjes Milosavljevic, Marija; Vrba, Vaclav; Vreeswijk, Marcel; Vu Anh, Tuan; Vuillermet, Raphael; Vukotic, Ilija; Wagner, Wolfgang; Wagner, Peter; Wahlen, Helmut; Wahrmund, Sebastian; Wakabayashi, Jun; Walch, Shannon; Walder, James; Walker, Rodney; Walkowiak, Wolfgang; Wall, Richard; Waller, Peter; Walsh, Brian; Wang, Chiho; Wang, Haichen; Wang, Hulin; Wang, Jike; Wang, Jin; Wang, Rui; Wang, Song-Ming; Wang, Tan; Warburton, Andreas; Ward, Patricia; Wardrope, David Robert; Warsinsky, Markus; Washbrook, Andrew; Wasicki, Christoph; Watanabe, Ippei; Watkins, Peter; Watson, Alan; Watson, Ian; Watson, Miriam; Watts, Gordon; Watts, Stephen; Waugh, Anthony; Waugh, Ben; Weber, Michele; Webster, Jordan S; Weidberg, Anthony; Weigell, Philipp; Weingarten, Jens; Weiser, Christian; Wells, Phillippa; Wenaus, Torre; Wendland, Dennis; Weng, Zhili; Wengler, Thorsten; Wenig, Siegfried; Wermes, Norbert; Werner, Matthias; Werner, Per; Werth, Michael; Wessels, Martin; Wetter, Jeffrey; Weydert, Carole; Whalen, Kathleen; White, Andrew; White, Martin; White, Sebastian; Whitehead, Samuel Robert; Whiteson, Daniel; Whittington, Denver; Wicke, Daniel; Wickens, Fred; Wiedenmann, Werner; Wielers, Monika; Wienemann, Peter; Wiglesworth, Craig; Wiik-Fuchs, Liv Antje Mari; Wijeratne, Peter Alexander; Wildauer, Andreas; Wildt, Martin Andre; Wilhelm, Ivan; Wilkens, Henric George; Will, Jonas Zacharias; Williams, Eric; Williams, Hugh; Willis, William; Willocq, Stephane; Wilson, John; Wilson, Michael Galante; Wilson, Alan; Wingerter-Seez, Isabelle; Winkelmann, Stefan; Winklmeier, Frank; Wittgen, Matthias; Wollstadt, Simon Jakob; Wolter, Marcin Wladyslaw; Wolters, Helmut; Wong, Wei-Cheng; Wooden, Gemma; Wosiek, Barbara; Wotschack, Jorg; Woudstra, Martin; Wozniak, Krzysztof; Wraight, Kenneth; Wright, Michael; Wrona, Bozydar; Wu, Sau Lan; Wu, Xin; Wu, Yusheng; Wulf, Evan; Wynne, Benjamin; Xella, Stefania; Xiao, Meng; Xie, Song; Xu, Chao; Xu, Da; Xu, Lailin; Yabsley, Bruce; Yacoob, Sahal; Yamada, Miho; Yamaguchi, Hiroshi; Yamamoto, Akira; Yamamoto, Kyoko; Yamamoto, Shimpei; Yamamura, Taiki; Yamanaka, Takashi; Yamazaki, Takayuki; Yamazaki, Yuji; Yan, Zhen; Yang, Haijun; Yang, Un-Ki; Yang, Yi; Yang, Zhaoyu; Yanush, Serguei; Yao, Liwen; Yasu, Yoshiji; Yatsenko, Elena; Ye, Jingbo; Ye, Shuwei; Yen, Andy L; Yilmaz, Metin; Yoosoofmiya, Reza; Yorita, Kohei; Yoshida, Rikutaro; Yoshihara, Keisuke; Young, Charles; Young, Christopher John; Youssef, Saul; Yu, Dantong; Yu, David Ren-Hwa; Yu, Jaehoon; Yu, Jie; Yuan, Li; Yurkewicz, Adam; Zabinski, Bartlomiej; Zaidan, Remi; Zaitsev, Alexander; Zanello, Lucia; Zanzi, Daniele; Zaytsev, Alexander; Zeitnitz, Christian; Zeman, Martin; Zemla, Andrzej; Zenin, Oleg; Ženiš, Tibor; Zinonos, Zinonas; Zerwas, Dirk; Zevi della Porta, Giovanni; Zhang, Dongliang; Zhang, Huaqiao; Zhang, Jinlong; Zhang, Xueyao; Zhang, Zhiqing; Zhao, Long; Zhao, Zhengguo; Zhemchugov, Alexey; Zhong, Jiahang; Zhou, Bing; Zhou, Ning; Zhou, Yue; Zhu, Cheng Guang; Zhu, Hongbo; Zhu, Junjie; Zhu, Yingchun; Zhuang, Xuai; Zhuravlov, Vadym; Zibell, Andre; Zieminska, Daria; Zimin, Nikolai; Zimmermann, Robert; Zimmermann, Simone; Zimmermann, Stephanie; Ziolkowski, Michael; Zitoun, Robert; Živković, Lidija; Zmouchko, Viatcheslav; Zobernig, Georg; Zoccoli, Antonio; zur Nedden, Martin; Zutshi, Vishnu; Zwalinski, Lukasz

2013-03-04

Using 1.8 fb-1 of pp collisions at a center-of-mass energy of 7 TeV recorded by the ATLAS detector at the Large Hadron Collider, we present measurements of the production cross sections of Upsilon(1S,2S,3S) mesons. Upsilon mesons are reconstructed using the di-muon decay mode. Total production cross sections for p_T<70 GeV and in the rapidity interval |$y^{\\Upsilon}$|<2.25 are measured to be 8.01+-0.02+-0.36+-0.31 nb, 2.05+-0.01+-0.12+-0.08 nb, 0.92+-0.01+-0.07+-0.04 nb respectively, with uncertainties separated into statistical, systematic, and luminosity measurement effects. In addition, differential cross section times di-muon branching fractions for Upsilon(1S), Upsilon(2S), and Upsilon(3S) as a function of Upsilon transverse momentum p_T and rapidity are presented. These cross sections are obtained assuming unpolarized production. If the production polarization is fully transverse or longitudinal with no azimuthal dependence in the helicity frame the cross section may vary by approximately +-20%. I...

Factors affecting regional changes in hardwood lumber production

Science.gov (United States)

William G. Luppold; Gilbert P. Dempsey; Gilbert P. Dempsey

1994-01-01

Hardwood lumber production increased by nearly 1.8 billion board feet between 1986 and 1990 and decreased sharply in 1991. However, not all areas of the country experienced the same growth in hardwood lumber production during the 1980s. While lumber production in inland regions of the eastern United States and the west increased during the 1980s, lumber output in...

Autosomal dominant familial erythrocytosis due to autonomous erythropoietin production

International Nuclear Information System (INIS)

Distelhorst, C.W.; Wagner, D.S.; Goldwasser, E.; Adamson, J.W.

1981-01-01

A family is described in which four members spanning three consecutive generations have erythrocytosis associated with a normal hemoglobin oxygen affinity. When bone marrow from one affected family member was cultured in vitro, erythroid colonies formed only when erythropoietin was added to the culture. Serum erythropoietin, measured by radioimmunoassay, was significantly elevated above normal in each of the affected family members. Bioassayable erythropoietin was detected in the urine of two of the three affected family members. In two of the affected family members, erythropoietin was measured in serum by radioimmunoassay and in urine by bioassay before and for 4 days following an isovolemic phlebotomy, which reduced the red cell mass by 20%. Neither serum nor urinary erythropoietin levels changed following phlebotomy. The erythrocytosis in this family appears to be secondary to inappropriately increased erythropoietin production unassociated with a decrease in the blood oxygen-carrying capacity. This is the first instance in which autonomous erythropoietin production appears to be inherited on an autosomal dominant basis

Alexithymia Components Are Differentially Related to Explicit Negative Affect But Not Associated with Explicit Positive Affect or Implicit Affectivity.

Science.gov (United States)

Suslow, Thomas; Donges, Uta-Susan

2017-01-01

Alexithymia represents a multifaceted personality construct defined by difficulties in recognizing and verbalizing emotions and externally oriented thinking. According to clinical observations, experience of negative affects is exacerbated and experience of positive affects is decreased in alexithymia. Findings from research based on self-report indicate that all alexithymia facets are negatively associated with the experience of positive affects, whereas difficulties identifying and describing feelings are related to heightened negative affect. Implicit affectivity, which can be measured using indirect assessment methods, relates to processes of the impulsive system. The aim of the present study was to examine, for the first time, the relations between alexithymia components and implicit and explicit positive and negative affectivity in healthy adults. The 20-item Toronto Alexithymia Scale, the Implicit Positive and Negative Affect Test and the Positive and Negative Affect Schedule (PANAS) were administered to two hundred and forty-one healthy individuals along with measures of depression and trait anxiety. Difficulties identifying feelings were correlated with explicit negative trait affect, depressive mood and trait anxiety. Difficulties describing feelings showed smaller but also significant correlations with depressive mood and trait anxiety but were not correlated with explicit state or trait affect as assessed by the PANAS. Externally oriented thinking was not significantly correlated with any of the implicit and explicit affect measures. According to our findings, an externally oriented, concrete way of thinking appears to be generally unrelated to dispositions to develop positive or negative affects. Difficulties identifying feelings seem to be associated with increased conscious negative affects but not with a heightened disposition to develop negative affects at an automatic response level.

Alexithymia Components Are Differentially Related to Explicit Negative Affect But Not Associated with Explicit Positive Affect or Implicit Affectivity

Directory of Open Access Journals (Sweden)

Thomas Suslow

2017-10-01

Full Text Available Alexithymia represents a multifaceted personality construct defined by difficulties in recognizing and verbalizing emotions and externally oriented thinking. According to clinical observations, experience of negative affects is exacerbated and experience of positive affects is decreased in alexithymia. Findings from research based on self-report indicate that all alexithymia facets are negatively associated with the experience of positive affects, whereas difficulties identifying and describing feelings are related to heightened negative affect. Implicit affectivity, which can be measured using indirect assessment methods, relates to processes of the impulsive system. The aim of the present study was to examine, for the first time, the relations between alexithymia components and implicit and explicit positive and negative affectivity in healthy adults. The 20-item Toronto Alexithymia Scale, the Implicit Positive and Negative Affect Test and the Positive and Negative Affect Schedule (PANAS were administered to two hundred and forty-one healthy individuals along with measures of depression and trait anxiety. Difficulties identifying feelings were correlated with explicit negative trait affect, depressive mood and trait anxiety. Difficulties describing feelings showed smaller but also significant correlations with depressive mood and trait anxiety but were not correlated with explicit state or trait affect as assessed by the PANAS. Externally oriented thinking was not significantly correlated with any of the implicit and explicit affect measures. According to our findings, an externally oriented, concrete way of thinking appears to be generally unrelated to dispositions to develop positive or negative affects. Difficulties identifying feelings seem to be associated with increased conscious negative affects but not with a heightened disposition to develop negative affects at an automatic response level.

Application of the Stochastic Production Frontier to the Measurement ...

African Journals Online (AJOL)

Given the existing technology of the fish producers, proper management that bears in mind the use of improved fish species, maintenance of number of ponds and increased education of the fish producers on current techniques of production are policy measures that could help improve on the technical efficiency of fish ...

Decreased summer drought affects plant productivity and soil carbon dynamics in Mediterranean woodland

Science.gov (United States)

Cotrufo, M. F.; Alberti, G.; Inglima, I.; Marjanović, H.; Lecain, D.; Zaldei, A.; Peressotti, A.; Miglietta, F.

2011-06-01

Precipitation patterns are expected to change in the Mediterranean region within the next decades, with projected decreases in total rainfall and increases in extreme events. We manipulated precipitation patterns in a Mediterranean woodland, dominated by Arbutus unedo L., to study the effects of changing precipitation regimes on above-ground net primary production (ANPP) and soil C dynamics, specifically plant-derived C input to soil and soil respiration (SR). Experimental plots were exposed to either a 20 % reduction of throughfall or to water addition targeted at maintaining soil water content above a minimum of 10 % v/v. Treatments were compared to control plots which received ambient precipitation. The throughfall manipulation experiment started in 2004 and we report data up to the 2009 growing season. Enhanced soil moisture during summer months highly stimulated annual stem primary production, litter fall, SR and net annual plant-derived C input to soil which on average increased by 130 %, 26 %, 50 % and 220 %, respectively, as compared to control. In contrast, the 20 % reduction in throughfall (equivalent to 10 % reduction of precipitation) did not significantly change soil moisture at the site, and therefore did not significantly affect ANPP or SR. We conclude that minor changes (around 10 % reduction) in precipitation amount are not likely to significantly affect ANPP or soil C dynamics in Mediterranean woodland. However, if summer rain increases, C cycling will significantly accelerate but soil C stocks are not likely to be changed in the short-term. More studies involving modelling of long term C dynamics are needed to predict if the estimated increases in soil C input under wet conditions is going to be sustained and if labile C is being substituted to stable C, with a negative effect on long term soil C stocks.

Study of factors affecting the productivity of nurses based on the ACHIEVE model and prioritizing them using analytic hierarchy process technique, 2012

Directory of Open Access Journals (Sweden)

Payam Farhadi

2013-01-01

Full Text Available Objective: Improving productivity is one of the most important strategies for social-economic development. Human resources are known as the most important resources in the organizations′ survival and success. Aims: To determine the factors affecting the human resource productivity using the ACHIEVEa model from the nurses′ perspective and then prioritize them from the perspective of head nurses using Analytic Hierarchy Process (AHP technique. Settings and Design: Iran, Shiraz University of Medical Sciences teaching hospitals in 2012. Materials and Methods: This was an applied, cross-sectional and analytical-descriptive study conducted in two phases. In the first phase, to determine the factors affecting the human resource productivity from nurses′ perspective, 110 nurses were selected using a two-stage cluster sampling method. Required data were collected using the Persian version of Hersey and Goldsmith′s Human Resource Productivity Questionnaire. In the second phase, in order to prioritize the factors affecting human resource productivity based on the ACHIEVE model using AHP technique, pairwise comparisons matrices were given to the 19 randomly selected head nurses to express their opinions about those factors relative priorities or importance. Statistical Analysis Used: Collected data and matrices in two mentioned phases were analyzed using SPSS 15.0 and some statistical tests including Independent-Samples T-Test and Pearson Correlation coefficient, as well as, Super Decisions software (Latest Beta. Results: The human resource productivity had significant relationships with nurses′ sex (P = 0.008, marital status (P < 0.001, education level (P < 0.001, and all questionnaire factors (P < 0.05. Nurses′ productivity from their perspective was below average (44.97 ΁ 7.43. Also, the priorities of factors affecting the productivity of nurses based on the ACHIEVE model from the head nurses′ perspective using AHP technique, from the

Measurement of the Cross Section of W-boson pair production at LEP

CERN Document Server

Achard, P.; Aguilar-Benitez, M.; Alcaraz, J.; Alemanni, G.; Allaby, J.; Aloisio, A.; Alviggi, M.G.; Anderhub, H.; Andreev, Valery P.; Anselmo, F.; Arefev, A.; Azemoon, T.; Aziz, T.; Bagnaia, P.; Bajo, A.; Baksay, G.; Baksay, L.; Baldew, S.V.; Banerjee, S.; Banerjee, Sw.; Barczyk, A.; Barillere, R.; Bartalini, P.; Basile, M.; Batalova, N.; Battiston, R.; Bay, A.; Becattini, F.; Becker, U.; Behner, F.; Bellucci, L.; Berbeco, R.; Berdugo, J.; Berges, P.; Bertucci, B.; Betev, B.L.; Biasini, M.; Biglietti, M.; Biland, A.; Blaising, J.J.; Blyth, S.C.; Bobbink, G.J.; Bohm, A.; Boldizsar, L.; Borgia, B.; Bottai, S.; Bourilkov, D.; Bourquin, M.; Braccini, S.; Branson, J.G.; Brochu, F.; Burger, J.D.; Burger, W.J.; Button, A.; Cai, X.D.; Capell, M.; Cara Romeo, G.; Carlino, G.; Cartacci, A.; Casaus, J.; Cavallari, F.; Cavallo, N.; Cecchi, C.; Cerrada, M.; Chamizo, M.; Chang, Y.H.; Chemarin, M.; Chen, A.; Chen, G.; Chen, G.M.; Chen, H.F.; Chen, H.S.; Chiefari, G.; Cifarelli, L.; Cindolo, F.; Clare, I.; Clare, R.; Coignet, G.; Colino, N.; Costantini, S.; de la Cruz, B.; Cucciarelli, S.; van Dalen, J.A.; de Asmundis, R.; Deglon, P.; Debreczeni, J.; Degre, A.; Dehmelt, K.; Deiters, K.; della Volpe, D.; Delmeire, E.; Denes, P.; DeNotaristefani, F.; De Salvo, A.; Diemoz, M.; Dierckxsens, M.; van Dierendonck, D.; Dionisi, C.; Dittmar, M.; Doria, A.; Dova, M.T.; Duchesneau, D.; Duda, M.; Echenard, B.; Eline, A.; El Hage, A.; El Mamouni, H.; Engler, A.; Eppling, F.J.; Extermann, P.; Falagan, M.A.; Falciano, S.; Favara, A.; Fay, J.; Fedin, O.; Felcini, M.; Ferguson, T.; Fesefeldt, H.; Fiandrini, E.; Field, J.H.; Filthaut, F.; Fisher, P.H.; Fisher, W.; Fisk, I.; Forconi, G.; Freudenreich, K.; Furetta, C.; Galaktionov, Iouri; Ganguli, S.N.; Garcia-Abia, Pablo; Gataullin, M.; Gentile, S.; Giagu, S.; Gong, Z.F.; Grenier, Gerald Jean; Grimm, O.; Gruenewald, M.W.; Guida, M.; Gupta, V.K.; Gurtu, A.; Gutay, L.J.; Haas, D.; Hatzifotiadou, D.; Hebbeker, T.; Herve, Alain; Hirschfelder, J.; Hofer, H.; Hohlmann, M.; Holzner, G.; Hou, S.R.; Hu, Y.; Jin, B.N.; Jones, Lawrence W.; de Jong, P.; Josa-Mutuberria, I.; Kaur, M.; Kienzle-Focacci, M.N.; Kim, J.K.; Kirkby, Jasper; Kittel, W.; Klimentov, A.; Konig, A.C.; Kopal, M.; Koutsenko, V.; Kraber, M.; Kraemer, R.W.; Kruger, A.; Kunin, A.; Ladron de Guevara, P.; Laktineh, I.; Landi, G.; Lebeau, M.; Lebedev, A.; Lebrun, P.; Lecomte, P.; Lecoq, P.; Le Coultre, P.; Le Goff, J.M.; Leiste, R.; Levtchenko, M.; Levtchenko, P.; Li, C.; Likhoded, S.; Lin, C.H.; Lin, W.T.; Linde, F.L.; Lista, L.; Liu, Z.A.; Lohmann, W.; Longo, E.; Lu, Y.S.; Luci, C.; Luminari, L.; Lustermann, W.; Ma, W.G.; Malgeri, L.; Malinin, A.; Mana, C.; Mans, J.; Martin, J.P.; Marzano, F.; Mazumdar, K.; McNeil, R.R.; Mele, S.; Merola, L.; Meschini, M.; Metzger, W.J.; Mihul, A.; Milcent, H.; Mirabelli, G.; Mnich, J.; Mohanty, G.B.; Moulik, T.; Muanza, G.S.; Muijs, A.J.M.; Musicar, B.; Musy, M.; Nagy, S.; Nandakumar, R.; Natale, S.; Napolitano, M.; Nessi-Tedaldi, F.; Newman, H.; Nisati, A.; Novak, T.; Kluge, Hannelies; Ofierzynski, R.; Organtini, G.; Pal, I.; Palomares, C.; Paolucci, P.; Paramatti, R.; Passaleva, G.; Patricelli, S.; Paul, Thomas Cantzon; Pauluzzi, M.; Paus, C.; Pauss, F.; Pedace, M.; Pensotti, S.; Perret-Gallix, D.; Petersen, B.; Piccolo, D.; Pierella, F.; Pioppi, M.; Piroue, P.A.; Pistolesi, E.; Plyaskin, V.; Pohl, M.; Pojidaev, V.; Pothier, J.; Prokofev, D.; Quartieri, J.; Rahal-Callot, G.; Rahaman, Mohammad Azizur; Raics, P.; Raja, N.; Ramelli, R.; Rancoita, P.G.; Ranieri, R.; Raspereza, A.; Razis, P.; Ren, D.; Rescigno, M.; Reucroft, S.; Riemann, S.; Riles, Keith; Roe, B.P.; Romero, L.; Rosca, A.; Rosemann, C.; Rosenbleck, C.; Rosier-Lees, S.; Roth, Stefan; Rubio, J.A.; Ruggiero, G.; Rykaczewski, H.; Sakharov, A.; Saremi, S.; Sarkar, S.; Salicio, J.; Sanchez, E.; Schafer, C.; Schegelsky, V.; Schopper, H.; Schotanus, D.J.; Sciacca, C.; Servoli, L.; Shevchenko, S.; Shivarov, N.; Shoutko, V.; Shumilov, E.; Shvorob, A.; Son, D.; Souga, C.; Spillantini, P.; Steuer, M.; Stickland, D.P.; Stoyanov, B.; Straessner, A.; Sudhakar, K.; Sultanov, G.; Sun, L.Z.; Sushkov, S.; Suter, H.; Swain, J.D.; Szillasi, Z.; Tang, X.W.; Tarjan, P.; Tauscher, L.; Taylor, L.; Tellili, B.; Teyssier, D.; Timmermans, Charles; Ting, Samuel C.C.; Ting, S.M.; Tonwar, S.C.; Toth, J.; Tully, C.; Tung, K.L.; Ulbricht, J.; Valente, E.; Van de Walle, R.T.; Vasquez, R.; Veszpremi, V.; Vesztergombi, G.; Vetlitsky, I.; Vicinanza, D.; Viertel, G.; Villa, S.; Vivargent, M.; Vlachos, S.; Vodopianov, I.; Vogel, H.; Vogt, H.; Vorobev, I.; Vorobyov, A.A.; Wadhwa, M.; Wang, Q.; Wang, X.L.; Wang, Z.M.; Weber, A.; Weber, M.; Wilkens, H.; Wynhoff, S.; Xia, L.; Xu, Z.Z.; Yamamoto, J.; Yang, B.Z.; Yang, C.G.; Yang, H.J.; Yang, M.; Yeh, S.C.; Zalite, An.; Zalite, Yu.; Zhang, Z.P.; Zhao, J.; Zhu, G.Y.; Zhu, R.Y.; Zhuang, H.L.; Zichichi, A.; Zimmermann, B.; Zoller, M.

2004-01-01

The cross section of W-boson pair-production is measured with the L3 detector at LEP. In a data sample corresponding to a total luminosity of 629.4/pb, collected at centre-of-mass energies ranging from 189 to 209 GeV, 9834 four-fermion events with W bosons decaying into hadrons or leptons are selected. The total cross section is measured with a precision of 1.4 % and agrees with the Standard Model expectation. Assuming charged-lepton universality, the branching fraction for hadronic W-boson decays is measured to be: Br(W-->hadrons) = 67.50 +- 0.42 (stat.) +- 0.30(syst.) %, in agreement with the Standard Model. Differential cross sections as a function of the W- production angle are also measured for the semi-leptonic channels qqev and qqmv.

Does species richness affect fine root biomass and production in young forest plantations?

Science.gov (United States)

Domisch, Timo; Finér, Leena; Dawud, Seid Muhie; Vesterdal, Lars; Raulund-Rasmussen, Karsten

2015-02-01

Tree species diversity has been reported to increase forest ecosystem above-ground biomass and productivity, but little is known about below-ground biomass and production in diverse mixed forests compared to single-species forests. For testing whether species richness increases below-ground biomass and production and thus complementarity between forest tree species in young stands, we determined fine root biomass and production of trees and ground vegetation in two experimental plantations representing gradients in tree species richness. Additionally, we measured tree fine root length and determined species composition from fine root biomass samples with the near-infrared reflectance spectroscopy method. We did not observe higher biomass or production in mixed stands compared to monocultures. Neither did we observe any differences in tree root length or fine root turnover. One reason for this could be that these stands were still young, and canopy closure had not always taken place, i.e. a situation where above- or below-ground competition did not yet exist. Another reason could be that the rooting traits of the tree species did not differ sufficiently to support niche differentiation. Our results suggested that functional group identity (i.e. conifers vs. broadleaved species) can be more important for below-ground biomass and production than the species richness itself, as conifers seemed to be more competitive in colonising the soil volume, compared to broadleaved species.

Feeding nitrate and docosahexaenoic acid affects enteric methane production and milk fatty acid composition in lactating dairy cows.

Science.gov (United States)

Klop, G; Hatew, B; Bannink, A; Dijkstra, J

2016-02-01

An experiment was conducted to study potential interaction between the effects of feeding nitrate and docosahexaenoic acid (DHA; C22:6 n-3) on enteric CH4 production and performance of lactating dairy cows. Twenty-eight lactating Holstein dairy cows were grouped into 7 blocks of 4 cows. Within blocks, cows were randomly assigned to 1 of 4 treatments: control (CON; urea as alternative nonprotein N source to nitrate), NO3 [21 g of nitrate/kg of dry matter (DM)], DHA (3 g of DHA/kg of DM and urea as alternative nonprotein N source to nitrate), or NO3 + DHA (21 g of nitrate/kg of DM and 3 g of DHA/kg of DM, respectively). Cows were fed a total mixed ration consisting of 21% grass silage, 49% corn silage, and 30% concentrates on a DM basis. Feed additives were included in the concentrates. Cows assigned to a treatment including nitrate were gradually adapted to the treatment dose of nitrate over a period of 21 d during which no DHA was fed. The experimental period lasted 17 d, and CH4 production was measured during the last 5d in climate respiration chambers. Cows produced on average 363, 263, 369, and 298 g of CH4/d on CON, NO3, DHA, and NO3 + DHA treatments, respectively, and a tendency for a nitrate × DHA interaction effect was found where the CH4-mitigating effect of nitrate decreased when combined with DHA. This tendency was not obtained for CH4 production relative to dry matter intake (DMI) or to fat- and protein corrected milk (FPCM). The NO3 treatment decreased CH4 production irrespective of the unit in which it was expressed, whereas DHA did not affect CH4 production per kilogram of DMI, but resulted in a higher CH4 production per kilogram of fat- and protein-corrected milk (FPCM) production. The FPCM production (27.9, 24.7, 24.2, and 23. 8 kg/d for CON, NO3, DHA, and NO3 + DHA, respectively) was lower for DHA-fed cows because of decreased milk fat concentration. The proportion of saturated fatty acids in milk fat was decreased by DHA, and the proportion of

How Employee Turnover Affects Productivity

DEFF Research Database (Denmark)

Eriksen, Bo

Research on employee turnover suggests that turnover results in negative organization-level outcomes. This paper provides a firm-level analysis of the impact of the in- and outflows of human resources on productivity and how the presence of organizational slack resources moderates the effects...... moderate this effect so that the negative consequences of employee turnover are less severe for larger, older and capital intensive firms. These moderating variables indicate the presence of slack resources in the firm, and thus that the accumulation of slack reduces the efficiency losses from employee...

How shear increments affect the flow production branching ratio in CSDX

Science.gov (United States)

Li, J. C.; Diamond, P. H.

2018-06-01

The coupling of turbulence-driven azimuthal and axial flows in a linear device absent magnetic shear (Controlled Shear Decorrelation Experiment) is investigated. In particular, we examine the apportionment of Reynolds power between azimuthal and axial flows, and how the azimuthal flow shear affects axial flow generation and saturation by drift wave turbulence. We study the response of the energy branching ratio, i.e., ratio of axial and azimuthal Reynolds powers, PzR/PyR , to incremental changes of azimuthal and axial flow shears. We show that increasing azimuthal flow shear decreases the energy branching ratio. When axial flow shear increases, this ratio first increases but then decreases to zero. The axial flow shear saturates below the threshold for parallel shear flow instability. The effects of azimuthal flow shear on the generation and saturation of intrinsic axial flows are analyzed. Azimuthal flow shear slows down the modulational growth of the seed axial flow shear, and thus reduces intrinsic axial flow production. Azimuthal flow shear reduces both the residual Reynolds stress (of axial flow, i.e., ΠxzR e s ) and turbulent viscosity ( χzDW ) by the same factor |⟨vy⟩'|-2Δx-2Ln-2ρs2cs2 , where Δx is the distance relative to the reference point where ⟨vy⟩=0 in the plasma frame. Therefore, the stationary state axial flow shear is not affected by azimuthal flow shear to leading order since ⟨vz⟩'˜ΠxzR e s/χzDW .

Measurements of Multi-boson production, Trilinear and Quartic Gauge Couplings with the ATLAS detector

International Nuclear Information System (INIS)

Becker, Maurice

2016-01-01

The ATLAS collaboration has carried a set of measurements that provide stringent tests of the electroweak sector of Standard Model, specifically on di- and multiboson production cross sections and on triple and quartic gauge-boson couplings. Such measurements include cross sections for WV (V=W or Z) production in the leptonic or semileptonic channels, the production of a W or Z boson in association with photons, a Z boson in the vector-boson fusion channel and two same-charge W bosons in the vectorboson scattering channel. These measurements are compared to (N)NLO predictions of the Standard Model and provide model-independent constraints on new physics, by setting limits on anomalous gauge-boson couplings. An analysis of the inclusive four-lepton lineshape has been carried out in the mass range from 80 to 1000 GeV, where several distinct physics processes give rise to the production of 4-lepton final state, namely the single Z resonant processes, the Higgs production at 125 GeV, as well as continuum ZZ production processes with qq-bar and gg initial states

Spices in a Product Affect Emotions: A Study with an Extruded Snack Product †

Science.gov (United States)

Bell, Brandon; Adhikari, Koushik; Alavi, Sajid; King, Silvia; Haub, Mark

2017-01-01

Food commonly is associated with emotion. The study was designed to determine if a spice blend (cinnamon, ginger, nutmeg, and cloves) high in antioxidants can evoke changes in consumer emotions. This was an exploratory study to determine the effects of these four spices on emotions. Three extruded, dry snack products containing 0, 4, or a 5% spice blend were tested. One day of hedonic and just-about-right evaluations (n = 100), followed by three days of emotion testing were conducted. A human clinical trial (n = 10), using the control and the 4% samples, measured total antioxidant capacity and blood glucose levels. The emotion “Satisfied” increased significantly in the 5% blend, showing an effect of a higher spice content. The 4% blend was significantly higher in total antioxidant capacity than the baseline, but blood glucose levels were not significantly different. PMID:28820459

Spices in a Product Affect Emotions: A Study with an Extruded Snack Product †.

Science.gov (United States)

Bell, Brandon; Adhikari, Koushik; Chambers, Edgar; Alavi, Sajid; King, Silvia; Haub, Mark

2017-08-18

Food commonly is associated with emotion. The study was designed to determine if a spice blend (cinnamon, ginger, nutmeg, and cloves) high in antioxidants can evoke changes in consumer emotions. This was an exploratory study to determine the effects of these four spices on emotions. Three extruded, dry snack products containing 0, 4, or a 5% spice blend were tested. One day of hedonic and just-about-right evaluations ( n = 100), followed by three days of emotion testing were conducted. A human clinical trial ( n = 10), using the control and the 4% samples, measured total antioxidant capacity and blood glucose levels. The emotion "Satisfied" increased significantly in the 5% blend, showing an effect of a higher spice content. The 4% blend was significantly higher in total antioxidant capacity than the baseline, but blood glucose levels were not significantly different.

Measurements of the top-quark mass and production cross section at CMS

CERN Multimedia

CERN. Geneva

2012-01-01

Recent measurements of the top mass at CMS are presented, based on several channels and different techniques. The results are combined giving a precise determination of the top mass. The measurements of the ttbar and single top production cross sections at 7 TeV and 8 TeV centre-of-mass energy are reviewed. The ttbar production cross section is utilized to derive a precise determination of the strong coupling constant, the single top cross section is interpreted in terms of the CKM element V_tb

Design principles for prototype and production magnetic measurements of superconducting magnets

International Nuclear Information System (INIS)

Brown, B.C.

1989-02-01

The magnetic field strength and shape for SSC superconducting magnets will determine critical properties of the accelerator systems. This paper will enumerate the relations between magnetic field properties and magnet material selection and assembly techniques. Magnitudes of various field errors will be explored along with operating parameters which can affect them. Magnetic field quality requirements will be compared to available measuring techniques and the relation between magnetic field measurements and other quality control efforts will be discussed. This will provide a framework for designing a complete magnet measurement plan for the SSC project. 17 refs., 1 fig., 5 tabs

Single top quark production cross-section measurements using the ATLAS and CMS detectors at the LHC

CERN Document Server

Finelli, Kevin Daniel; The ATLAS collaboration

2015-01-01

Measurements of single top quark production in proton--proton collisions at 7 and 8 TeV using the ATLAS and CMS detectors at the LHC are presented. In the leading order process, a $W$ boson is exchanged in the $t$-channel. The single top quark and anti-top total production cross-sections ratio, as well as a measurement of the inclusive and fiducial production cross-sections are presented. In addition, a measurement of the production cross-section of a single top quark in association with a $W$ boson is presented. All measurements are compared to state-of-the-art theoretical calculations and the CKM matrix element $|V_{tb}|$ is determined. The $s$-channel production is also explored and limits on exotic production in single top quark processes are discussed. This includes the search for additional $W’$ bosons and a search for monotops.

Detection of genetic variants affecting cattle behaviour and their impact on milk production: a genome-wide association study.

Science.gov (United States)

Friedrich, Juliane; Brand, Bodo; Ponsuksili, Siriluck; Graunke, Katharina L; Langbein, Jan; Knaust, Jacqueline; Kühn, Christa; Schwerin, Manfred

2016-02-01

Behaviour traits of cattle have been reported to affect important production traits, such as meat quality and milk performance as well as reproduction and health. Genetic predisposition is, together with environmental stimuli, undoubtedly involved in the development of behaviour phenotypes. Underlying molecular mechanisms affecting behaviour in general and behaviour and productions traits in particular still have to be studied in detail. Therefore, we performed a genome-wide association study in an F2 Charolais × German Holstein cross-breed population to identify genetic variants that affect behaviour-related traits assessed in an open-field and novel-object test and analysed their putative impact on milk performance. Of 37,201 tested single nucleotide polymorphism (SNPs), four showed a genome-wide and 37 a chromosome-wide significant association with behaviour traits assessed in both tests. Nine of the SNPs that were associated with behaviour traits likewise showed a nominal significant association with milk performance traits. On chromosomes 14 and 29, six SNPs were identified to be associated with exploratory behaviour and inactivity during the novel-object test as well as with milk yield traits. Least squares means for behaviour and milk performance traits for these SNPs revealed that genotypes associated with higher inactivity and less exploratory behaviour promote higher milk yields. Whether these results are due to molecular mechanisms simultaneously affecting behaviour and milk performance or due to a behaviour predisposition, which causes indirect effects on milk performance by influencing individual reactivity, needs further investigation. © 2015 Stichting International Foundation for Animal Genetics.

Measurement of inclusive production of neutral pions at high transverse momentum

International Nuclear Information System (INIS)

Ogawa, A.

1978-10-01

These are the results of a measurement of inclusive production at high transverse momentum (P perpendicular to) of neutral pions (π 0 ) from protons by beams of proton (p), kaon (K), pion (π), and antiproton (antiproton) particles. The experiment used the Fermilab M2 beam line at momenta of 100, 200 and 300 GeV/c striking a liquid hydrogen target. The data include center of mass (cm) production angles of the π 0 between 2 0 and 115 0 for P perpendicular to greater than 1 GeV/c. A pair of differential Cherenkov counters distinguished the types of beam particles. The photon (γ) detector of a lead and scintillator sandwich measured both photons from the π 0 → 2γ decay and enabled a reconstruction of the π 0 kinematics. The measurements show several remarkable features distinguishing the production rates for these different beams, including a forward peak in the cm for πp collisions and much less π 0 production at high P perpendicular to in pp than in πp or Kp collisions. A simple parametrization accurately represents the data over most of its range, showing approximate scaling in the radial variable x/sub R/ = 2P/√s (in the cm). Several parton models are compared with the data. A heuristic picture in terms of the quark constituents of the interacting hadrons accounts for many features of the data in an intuitive way. 62 references

75 FR 1110 - WTO Dispute Settlement Proceeding Regarding United States-Certain Measures Affecting Imports of...

Science.gov (United States)

2010-01-08

... OFFICE OF THE UNITED STATES TRADE REPRESENTATIVE [Docket No. WTO/DS399] WTO Dispute Settlement... Organization (``WTO Agreement'') concerning certain measures affecting imports of certain passenger vehicle and light truck tires from China. The request may be found at http://www.wto.org in document WT/DS399/2...

Measurement of the Top Quark Pair Production Cross Section in pp Collisions

International Nuclear Information System (INIS)

Gomez, B.; Hoeneisen, B.; Mooney, P.; Negret, J.P.; Davis, K.; Fein, D.; Forden, G.E.; Guida, J.A.; James, E.; Johns, K.; Markosky, L.; Nang, F.; Narayanan, A.; Rutherfoord, J.; Butler, J.M.; Fatyga, M.; Featherly, J.; Gibbard, B.; Gordon, H.; Graf, N.; Kahn, S.; Kotcher, J.; Protopopescu, S.; Rajagopalan, S.; Bantly, J.; Cullen-Vidal, D.; Cutts, D.; Guida, J.M.; Hoftun, J.S.; Nesic, D.; Partridge, R.; Grinstein, S.; Piegaia, R.; Bloom, P.; Fisyak, Y.; Glenn, S.; Grim, G.; Klopfenstein, C.; Lander, R.; Mani, S.; Drinkard, J.; Fahland, T.; Hall, R.E.; Boswell, C.; Choudhary, B.C.; Cochran, J.; Ellison, J.; Gartung, P.; Heinson, A.P.; Huehn, T.; Alves, G.A.; Carvalho, W.; Maciel, A.K.; Miranda, J.M. de; Motta, H. da.; Nicola, M.; Castilla-Valdez, H.; Gonzalez Solis, J.L.; Hernandez-Montoya, R.; Magana-Mendoza, L.; Adam, I.; Kotwal, A.V.; Bhattacharjee, M.; Abachi, S.; Ahn, S.; Baldin, B.; Bartlett, J.F.; Bhat, P.C.; Boehnlein, A.; Borcherding, F.; Brandt, A.; Bross, A.; Christenson, J.H.; Cooper, W.E.; Demarteau, M.; Denisov, D.; Diehl, H.T.; Diesburg, M.; Feher, S.; Fisk, H.E.; Flattum, E.; Fuess, S.; Genser, K.; Gerber, C.E.; Green, D.R.; Greenlee, H.; Grossman, N.; Haggerty, H.

1997-01-01

We present a measurement of the t bar t production cross section in p bar p collisions at √(s)=1.8 TeV by the D0 experiment at the Fermilab Tevatron. The measurement is based on data from an integrated luminosity of approximately 125 pb -1 accumulated during the 1992 endash 1996 collider run. We observe 39t bar t candidate events in the dilepton and lepton+jets decay channels with an expected background of 13.7±2.2 events. For a top quark mass of 173.3 GeV/c 2 , we measure the t bar t production cross section to be 5.5±1.8 pb. copyright 1997 The American Physical Society

Fission product yield measurements using monoenergetic photon beams

Science.gov (United States)

Krishichayan; Bhike, M.; Tonchev, A. P.; Tornow, W.

2017-09-01

Measurements of fission products yields (FPYs) are an important source of information on the fission process. During the past couple of years, a TUNL-LANL-LLNL collaboration has provided data on the FPYs from quasi monoenergetic neutron-induced fission on 235U, 238U, and 239Pu and has revealed an unexpected energy dependence of both asymmetric fission fragments at energies below 4 MeV. This peculiar FPY energy dependence was more pronounced in neutron-induced fission of 239Pu. In an effort to understand and compare the effect of the incoming probe on the FPY distribution, we have carried out monoenergetic photon-induced fission experiments on the same 235U, 238U, and 239Pu targets. Monoenergetic photon beams of Eγ = 13.0 MeV were provided by the HIγS facility, the world's most intense γ-ray source. In order to determine the total number of fission events, a dual-fission chamber was used during the irradiation. These irradiated samples were counted at the TUNL's low-background γ-ray counting facility using high efficient HPGe detectors over a period of 10 weeks. Here we report on our first ever photofission product yield measurements obtained with monoenegetic photon beams. These results are compared with neutron-induced FPY data.

Fission product yield measurements using monoenergetic photon beams

Directory of Open Access Journals (Sweden)

Krishichayan

2017-01-01

Full Text Available Measurements of fission products yields (FPYs are an important source of information on the fission process. During the past couple of years, a TUNL-LANL-LLNL collaboration has provided data on the FPYs from quasi monoenergetic neutron-induced fission on 235U, 238U, and 239Pu and has revealed an unexpected energy dependence of both asymmetric fission fragments at energies below 4 MeV. This peculiar FPY energy dependence was more pronounced in neutron-induced fission of 239Pu. In an effort to understand and compare the effect of the incoming probe on the FPY distribution, we have carried out monoenergetic photon-induced fission experiments on the same 235U, 238U, and 239Pu targets. Monoenergetic photon beams of Eγ = 13.0 MeV were provided by the HIγS facility, the world's most intense γ-ray source. In order to determine the total number of fission events, a dual-fission chamber was used during the irradiation. These irradiated samples were counted at the TUNL's low-background γ-ray counting facility using high efficient HPGe detectors over a period of 10 weeks. Here we report on our first ever photofission product yield measurements obtained with monoenegetic photon beams. These results are compared with neutron-induced FPY data.

Comparative effectiveness of different carriers to improve the efficacy of bacterial consortium for enhancing wheat production under salt affected field conditions

International Nuclear Information System (INIS)

Shahzad, S.; Zahir, Z. A.; Asghar, H. N.; Chaudhry, U. K.

2017-01-01

Salinity is one of the most crucial problems for sustainable agriculture which is severely affecting crop growth and decreasing the food production. On another hand, burgeoning population in the world demands to produce more food. So, there is a need of hours to increase agricultural production particularly cereals from salt affected soils by adopting cost effective and environment friendly approaches. Use of bio-inoculants with salt tolerant plant growth promoting rhizobacteria (PGPR) could be a promising option to enhance the production of cereals in salt affected soils. Therefore, a field experiment was conducted to evaluate different carriers compost, peat, biogas slurry and press mud along with PGPR to enhance wheat production under salinity stress. Consortium containing equal proportion of three PGPR strains (Bacillus cereus strain Y5, Bacillus sp. Y14 and Bacillus subtilis strain Y16) was used with different carriers for seed coating. Finely ground and sterilized carriers were mixed in broth and coated on the surface of wheat seeds with different carriers. Coated seeds were sown in saline field with salinity range of 10-13 dS m/sup -1/. Results revealed that multi-strain bacterial inoculation improved the gas exchange, ionic, biochemical, growth and yield attributes of wheat crop under salinity stress. However, use of different carriers further improved the efficacy of multi-strain inoculation and significantly increased growth, yield and physiological parameters of wheat. The results of compost, peat and biogas slurry as carrier for bio-inoculants were statistically similar. (author)

Measuring myokines with cardiovascular functions: pre-analytical variables affecting the analytical output.

Science.gov (United States)

Lombardi, Giovanni; Sansoni, Veronica; Banfi, Giuseppe

2017-08-01

In the last few years, a growing number of molecules have been associated to an endocrine function of the skeletal muscle. Circulating myokine levels, in turn, have been associated with several pathophysiological conditions including the cardiovascular ones. However, data from different studies are often not completely comparable or even discordant. This would be due, at least in part, to the whole set of situations related to the preparation of the patient prior to blood sampling, blood sampling procedure, processing and/or store. This entire process constitutes the pre-analytical phase. The importance of the pre-analytical phase is often not considered. However, in routine diagnostics, the 70% of the errors are in this phase. Moreover, errors during the pre-analytical phase are carried over in the analytical phase and affects the final output. In research, for example, when samples are collected over a long time and by different laboratories, a standardized procedure for sample collecting and the correct procedure for sample storage are acknowledged. In this review, we discuss the pre-analytical variables potentially affecting the measurement of myokines with cardiovascular functions.

Measurements of absolute M-subshell X-ray production cross sections of Th by electron impact

Energy Technology Data Exchange (ETDEWEB)

Moy, A., E-mail: aurelien.moy@cea.fr [GM, CNRS, Université de Montpellier II, Place E. Bataillon, F-34095 Montpellier (France); CEA, DEN, DTEC, SGCS, LMAC, F-30207 Bagnols-sur-Cèze (France); Merlet, C. [GM, CNRS, Université de Montpellier II, Place E. Bataillon, F-34095 Montpellier (France); Dugne, O. [CEA, DEN, DTEC, SGCS, LMAC, F-30207 Bagnols-sur-Cèze (France)

2014-08-31

Highlights: • The M X-ray production cross sections of Th were measured by electron impact. • The M-subshell ionization cross sections of Th were determined from 3 to 38 keV. • Theoretical ionization cross-sections are in agreement with our experimental results. - Abstract: Measurements of absolute M-subshell X-ray production cross sections for element Th were made by electron impact for energies ranging from the ionization threshold up to 38 keV. Experimental data were obtained by measuring the X-ray intensity emitted from ultrathin Th films deposited onto self-supporting C backing films. The measurements were conducted with an electron microprobe using high-resolution wavelength dispersive spectrometers. Recorded intensities were converted into absolute X-ray production cross sections by means of atomic data and estimation of the number of primary electrons, target thickness, and detector efficiency. Our experimental X-ray production cross sections, the first to be reported for the M subshells of Th, are compared with X-ray production cross sections calculated with the mean of ionization cross sections obtained from the distorted-wave Born approximation. The Mα X-ray production cross section calculated is in excellent agreement with the measurements, allowing future use for standardless quantification in electron probe microanalysis.

Measuring consumers' interest in instant fortified pearl millet products: a field experiment in Touba, Senegal.

Science.gov (United States)

De Groote, Hugo; Kariuki, Sarah W; Traore, Djibril; Taylor, John Rn; Ferruzzi, Mario G; Hamaker, Bruce R

2018-04-01

In Africa, food-processing industries are emerging fast, especially for cereals. New low-cost extrusion cookers give small enterprises an opportunity to enter the market for processed cereal products, in particular instant, fortified and flavoured mixes. Before engaging in the marketing of these products, consumers' interest needs to be assessed. This study used a combination of affective tests and experimental auctions with 200 consumers in Touba, Senegal, to evaluate four new products with conventional pearl millet flour as the control: instant pearl millet flour, instant pearl millet flour with added dry mango and carrot powder (naturally fortified), and the previous products with added conventional chemical micronutrient fortificants. During affective tests, consumers made little distinction between the five products in appearance, aroma, taste and overall appreciation. The experimental auctions showed that, without providing additional information on the products, there was no difference in 'willingness to pay' (WTP) between them. However, after that information is provided, consumers were willing to pay a modest premium for instant flour, and a large premium for added mango and carrot extract and for added micronutrients, but were not willing to pay a premium if those micronutrients came from natural sources. Income increased overall WTP, while education increased WTP for instant flour. There is a potential market in low-income African countries for instant and fortified cereal food products, but likely in the higher income and education groups. The increased cost needs to be compared to the premiums consumers are willing to pay. In the next step, the new and promising products could be tested in pilot markets, with target consumers. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

Some insects affecting Penstemon seed production

Science.gov (United States)

Robert Hammon; Melissa Franklin

2012-01-01

Beardtongue (Penstemon Schmidel [Scrophulariaceae)) seeds are often produced without apparent damage from pests, but several species of native insects can adversely impact seed production fields. Tarnished plant bug (Lygus lineolaris (Palisot)) and western plant bug (Lygus hesperus Knight [Hemiptera: Miridae]), penstemon weevil (Hesperobaris sp. Casey [Coleoptera:...

Telling stories and adding scores: Measuring resilience in young children affected by maternal HIV and AIDS.

Science.gov (United States)

Ebersöhn, Liesel; Eloff, Irma; Finestone, Michelle; Grobler, Adri; Moen, Melanie

2015-01-01

"Telling stories and adding scores: Measuring resilience in young children affected by maternal HIV and AIDS", demonstrates how a concurrent mixed method design assisted cross-cultural comparison and ecological descriptions of resilience in young South African children, as well as validated alternative ways to measure resilience in young children. In a longitudinal randomised control trial, which investigated psychological resilience in mothers and children affected by HIV/AIDS, we combined a qualitative projective story-telling technique (Düss Fable) with quantitative data (Child Behaviour Checklist). The children mostly displayed adaptive resilience-related behaviours, although maladaptive behaviours were present. Participating children use internal (resolve/agency, positive future expectations, emotional intelligence) and external protective resources (material resources, positive institutions) to mediate adaptation. Children's maladaptive behaviours were exacerbated by internal (limited problem-solving skills, negative emotions) and external risk factors (chronic and cumulative adversity).

Measurement of isolated photon production in deep inelastic ep scattering

Energy Technology Data Exchange (ETDEWEB)

Chekanov, S.; Derrick, M.; Magill, S. [Argonne National Lab., Argonne, IL (US)] (and others)

2009-09-15

Isolated photon production in deep inelastic ep scattering has been measured with the ZEUS detector at HERA using an integrated luminosity of 320 pb{sup -1}. Measurements were made in the isolated-photon transverse-energy and pseudo- rapidity ranges 45 GeV. Differential cross sections are presented for inclusive isolated photon production as functions of Q{sup 2}, x, E{sub T}{sup {gamma}} and {eta}{sup {gamma}}. Leading-logarithm parton-shower Monte Carlo simulations and perturbative QCD predictions give a reasonable description of the data over most of the kinematic range. (orig.)

Quality Measurement in the Wood Products Supply Chain

OpenAIRE

Espinoza, Omar Alejandro

2009-01-01

The purpose of this research is to learn about quality measurement practices in a wood products supply chain. According to the Supply Chain Management paradigm, companies no longer compete as individual entities, but as part of complex networks of suppliers and customers, linked together by flows of materials and information. Evidence suggests that a high degree of integration between supply chain members is essential to achieve superior market and financial performance. This study investigat...

Measurement of D*{sup {+-}} meson production in deep-inelastic scattering at HERA

Energy Technology Data Exchange (ETDEWEB)

Bachynska, Olena

2012-12-15

Measurements of charm production in deep-inelastic scattering at HERA at a centre-of-mass energy of 318 GeV are reported in this thesis. The analysis was performed using the data collected with the ZEUS detector during the years 2004 to 2007, corresponding to an integrated luminosity of 363 pb{sup -1}. The production of charm quarks was studied through the full kinematic reconstruction of D*{sup {+-}} mesons in the decay channel D*{sup {+-}} {yields} D{sup 0}/ anti D{sup 0}{pi}{sup {+-}}. The studies have been performed for virtualities of the exchanged photon of 5 < Q{sup 2} < 1000 GeV{sup 2} and inelasticities of 0.02 < y < 0.7. The visible D*{sup {+-}} kinematic phase space is defined by the transverse momentum range, 1.5 < p{sub T}{sup D*{sup {+-}}} < 20 GeV, and by the pseudorapidity region, vertical stroke {eta}{sup D*{sup {+-}}} vertical stroke < 1.5, of the produced D*{sup {+-}} mesons. The total visible cross section for D*{sup {+-}} production as well as single-and double-differential cross sections were measured and compared to the corresponding D*{sup {+-}} measurements performed by the H1 collaboration in the same phase-space region. The measurements are well described by NLO QCD predictions. The double-differential cross sections were exploited to extract the charm contribution to the proton structure function, F{sub 2}{sup c} {sup anti} {sup c}, expressed in terms of the reduced charm-production cross sections, {sigma}{sub red}{sup c} {sup anti} {sup c}, and compared to the predictions from HERAPDF1.5 and to the recent measurements from the H1 and ZEUS collaborations.

Supporting Hydrometeorological Research and Applications with Global Precipitation Measurement (GPM) Products and Services

Science.gov (United States)

Liu, Zhong; Ostrenga, D.; Vollmer, B.; Deshong, B.; MacRitchie, K.; Greene, M.; Kempler, S.

2016-01-01

Precipitation is an important dataset in hydrometeorological research and applications such as flood modeling, drought monitoring, etc. On February 27, 2014, the NASA Global Precipitation Measurement (GPM) mission was launched to provide the next-generation global observations of rain and snow (http:pmm.nasa.govGPM). The GPM mission consists of an international network of satellites in which a GPM Core Observatory satellite carries both active and passive microwave instruments to measure precipitation and serve as a reference standard, to unify precipitation measurements from a constellation of other research and operational satellites. The NASA Goddard Earth Sciences (GES) Data and Information Services Center (DISC) hosts and distributes GPM data. The GES DISC is home to the data archive for the GPM predecessor, the Tropical Rainfall Measuring Mission (TRMM). GPM products currently available include the following:1. Level-1 GPM Microwave Imager (GMI) and partner radiometer products2. Goddard Profiling Algorithm (GPROF) GMI and partner products (Level-2 and Level-3)3. GPM dual-frequency precipitation radar and their combined products (Level-2 and Level-3)4. Integrated Multi-satellitE Retrievals for GPM (IMERG) products (early, late, and final run)GPM data can be accessed through a number of data services (e.g., Simple Subset Wizard, OPeNDAP, WMS, WCS, ftp, etc.). A newly released Unified User Interface or UUI is a single interface to provide users seamless access to data, information and services. For example, a search for precipitation products will not only return TRMM and GPM products, but also other global precipitation products such as MERRA (Modern Era Retrospective-Analysis for Research and Applications), GLDAS (Global Land Data Assimilation Systems), etc.New features and capabilities have been recently added in GIOVANNI to allow exploring and inter-comparing GPM IMERG (Integrated Multi-satelliE Retrievals for GPM) half-hourly and monthly precipitation

Light quality affects flavonoid production and related gene expression in Cyclocarya paliurus.

Science.gov (United States)

Liu, Yang; Fang, Shengzuo; Yang, Wanxia; Shang, Xulan; Fu, Xiangxiang

2018-02-01

Understanding the responses of plant growth and secondary metabolites to differential light conditions is very important to optimize cultivation conditions of medicinal woody plants. As a highly valued and multiple function tree species, Cyclocarya paliurus is planted and managed for timber production and medical use. In this study, LED-based light including white light (WL), blue light (BL), red light (RL), and green light (GL) were used to affect leaf biomass production, flavonoid accumulation and related gene expression of one-year C. paliurus seedlings in controlled environments. After the treatments of 60 days, the highest leaf biomass appeared in the treatment of WL, while the lowest leaf biomass was found under GL. Compared to WL, the total flavonoid contents of C. paliurus leaves were significantly higher in BL, RL, and GL, but the highest values of selected flavonoids (kaempferol, isoquercitrin and quercetin) were observed under BL. Furthermore, the greatest yields of total and selected flavonoids in C. paliurus leaves per seedling were also achieved under BL, indicating that blue light was effective for inducing the production of flavonoids in C. paliurus leaves. Pearson's correlation analysis showed that there were significantly positive correlations between leaf flavonoid content and relative gene expression of key enzymes (phenylalanine ammonia lyase, PAL; 4-coumaroyl CoA-ligase, 4CL; and chalcone synthase, CHS) in the upstream, which converting phenylalanine into the flavonoid skeleton of tetrahydroxy chalcone. It is concluded that manipulating light quality may be potential mean to achieve the highest yields of flavonoids in C. paliurus cultivation, however this needs to be further verified by more field trials. Copyright © 2018 Elsevier B.V. All rights reserved.

Plant Products Affect Growth and Digestive Efficiency of Cultured Florida Pompano (Trachinotus carolinus) Fed Compounded Diets

Science.gov (United States)

Lech, Gregory P.; Reigh, Robert C.

2012-01-01

Costs of compounded diets containing fish meal as a primary protein source can be expected to rise as fish meal prices increase in response to static supply and growing demand. Alternatives to fish meal are needed to reduce production costs in many aquaculture enterprises. Some plant proteins are potential replacements for fish meal because of their amino acid composition, lower cost and wide availability. In this study, we measured utilization of soybean meal (SBM) and soy protein concentrate (SPC) by Florida pompano fed compounded diets, to determine the efficacy of these products as fish meal replacements. We also calculated apparent digestibility coefficients (ADCs) for canola meal (CM), corn gluten meal (CGM), and distillers dried grains with solubles (DDGS), following typical methods for digestibility trials. Juvenile Florida pompano were fed fish-meal-free diets containing graded levels of SBM and SPC, and weight gain was compared to a control diet that contained SBM, SPC, and fish meal. Fish fed diets that contained 25–30 percent SBM in combination with 43–39 percent SPC had weight gain equivalent to fish fed the control diet with fish meal, while weight gain of fish fed other soy combinations was significantly less than that of the control group. Apparent crude protein digestibility of CGM was significantly higher than that of DDGS but not significantly different from CM. Apparent energy digestibility of DDGS was significantly lower than CGM but significantly higher than CM. Findings suggested that composition of the reference diet used in a digestibility trial affects the values of calculated ADCs, in addition to the chemical and physical attributes of the test ingredient. PMID:22536344

LHCb; Measurement of the forward-central $b \\bar{b}$ production asymmetry

CERN Multimedia

Salustino Guimarães, V

2013-01-01

CDF and D0 collaborations results suggests that the top-quark forward-backward production asymmetry is much larger than the Standard Model (SM) predictions. Measuring the $b \\bar{b}$ asymmetry production would provide constraint on the flavor structure of any model that attempts to explain the CDF and D0 results. A measurement of the forward-central (FC) $b\\bar{b}$ production asymmetry is presented based on the LHCb data collected in 2011 at $\\sqrt{s}$ = 7 TeV corresponding to an integrated luminosity of 1.0 fb$^{-1}$ using selected events that have two identified $b$ jets, one of which is flavor tagged by one muon with high momentum. The FC asymmetry is defined as \\begin{align} A^{b \\bar{b}}_{FC}=\\frac{N(\\Delta y > 0)-N(\\Delta y 0)+N(\\Delta y 100$ GeV the expected asymmetry is about $\\cal{O}$(0.1 %) where gluon fusion which has no asymmetry is less dominant at high mass.

The ATLAS Measurements of Jet Production and the Strong Coupling Constant

CERN Document Server

Sawyer, Lee; The ATLAS collaboration

2017-01-01

The production of jets at hadron colliders provides a stringent test of perturbative QCD at the highest energies. The process can also be used to probe the gluon density in the parton distribution function of the proton. Specific topologies can be used to extract the strong coupling constant. The ATLAS collaboration has recently measured the inclusive jet production cross section in data collected at a center-of-mass energy of 8 TeV and 13 TeV. The measurements have been performed differentially in jet rapidity and transverse momentum. The collaboration also presents a first measurement of the dijet cross section at a center-of-mass energy of 13 TeV as a function of the dijet invariant mass and rapidity. The results have been compared with state-of-the-art theory predictions at NLO in pQCD, interfaced with different parton distribution functions and can be used to constrain the proton structure. We also present new measurements of transverse energy-energy correlations (TEEC) and their associated asymmetries (...

Measurement of jet production with ATLAS and extraction of $\\alpha_s$

CERN Document Server

Laycock, Paul; The ATLAS collaboration

2017-01-01

The production of jets at hadron colliders provides a stringent test of perturbative QCD at the highest energies. The process can also be used to probe the gluon density function of the proton. Specific topologies can be used to extract the strong coupling constant. The ATLAS collaboration has recently measured the inclusive jet production cross section in data collected at a center-of-mass energy of 8TeV and 13TeV. The measurements have been performed differentially in jet rapidity and transverse momentum. The collaboration also presents a first measurement of the di-jet cross section at a center-of-mass energy of 13TeV as a function of the di-jet mass and rapidity. The results have been compared with state-of-the-art theory predictions at NLO in pQCD, interfaced with different parton distribution functions and can be used to constrain the proton structure. We also present new measurements of transverse energy-energy correlations (TEEC) and their associated asymmetries (ATEEC) in multi-jet events at a center...

A neutron detector for measurement of total neutron production cross sections

Energy Technology Data Exchange (ETDEWEB)

Sekharan, K K; Laumer, H; Kern, B D; Gabbard, F [Kentucky Univ., Lexington (USA). Dept. of Physics and Astronomy

1976-03-01

A neutron detector has been constructed and calibrated for the accurate measurement of total neutron production cross sections. The detector consists of a polyethylene sphere of 60 cm diameter in which eight /sup 10/BF/sub 3/ counters have been installed radially. The relative efficiency of this detector has been determined for average neutron energies from 30 keV to 1.5 MeV by counting neutrons from /sup 7/Li(p, n)/sup 7/Be. By adjusting the radial positions of the BF/sub 3/ counters in the polyethylene sphere the efficiency for neutron detection was made nearly constant for this energy range. Measurement of absolute efficiency for the same neutron energy range has been done by counting the neutrons from /sup 51/V(p, n)/sup 51/Cr and /sup 57/Fe(p, n)/sup 57/Co reactions and determining the absolute number of residual nuclei produced during the measurement of neutron yield. Details of absolute efficiency measurements and the use of the detector for determination of neutron production cross sections are given.

NanoCMM : a 3D coordinate measuring machine with low moving mass for measuring small products in array with nanometer uncertainty

NARCIS (Netherlands)

Seggelen, van J.K.

2007-01-01

To measure dimensions and shape of complex three dimensional products (e.g. engines, mouldings, etc) with low uncertainty, Coordinate Measuring Machines (CMMs) are adequate instruments due to their universal applicability, easy measurement set-up and measuring flexibility. Motion software is

Radon decay product in-door behaviour - parameter, measurement method, and model review

International Nuclear Information System (INIS)

Scofield, P.

1988-01-01

This report reviews parameters used to characterize indoor radon daughter behavior and concentrations. Certain parameters that affect indoor radon daughter concentrations are described and the values obtained experimentally or theoretically are summarized. Radon daughter measurement methods are reviewed, such as, PAEC, unattached daughters, particle size distributions, and plateout measurement methods. In addition, certain radon pressure driven/diffusion models and indoor radon daughter models are briefly described. (orig.)

The process of Ni-63 production and measurement of beta radiation of irradiated Ni-63

International Nuclear Information System (INIS)

Kim, Jin Joo; Uhma, Young Rang; Kim, Jong Bum; Choi, Sang Mu; Son, Kwang Jae; Hong, Jin Tae; Park, Jong Han

2016-01-01

It has the following characteristics: long service lifetime, high energy density, easy small-scale fabrication, and minimum maintenance. For this reasons, betavoltaic batteries are widely used in many low-power applications such as medical applications and power sources for micro electro-mechanical system (MEMS) because they can operate effectively at extreme environments. Proper selection of radioisotope is a critical factor in the design of a betavoltaic battery. The important factors affecting the performance of a betavoltaic battery are specific activity, half-life, and toxicity. In this study, a target for irradiation was produced using 99% Ni-62 metal power concentrate. Ni-62 target of 1 g was irradiated in MARIA reactor operated in Poland for 470 hours, and estimated production of Ni- 63 was calculated. Irradiated Ni-63 pellets were dissolved in HCl solution, and its beta radiation was measured by Liquid Scintillation Counter (LSC).

Military Families’ Perceptions of Neighborhood Characteristics Affecting Reintegration: Development of an Aggregate Measure

Science.gov (United States)

Beehler, Sarah; Ahern, Jennifer; Balmer, Brandi; Kuhlman, Jennifer

2017-01-01

This pilot study evaluated the validity and reliability of an Experience of Neighborhood (EON) measure developed to assess neighborhood characteristics that shape reintegration opportunities for returning service members and their families. A total of 91 post-9/11 veterans and spouses completed a survey administered at the Minnesota State Fair. Participants self-reported on their reintegration status (veterans), social functioning (spouses), social support, and mental health. EON factor structure, internal consistency reliability, and validity (discriminant, content, criterion) were analyzed. The EON measure showed adequate reliability, discriminant validity, and content validity. More work is needed to assess criterion validity because EON scores were not correlated with scores on a Census-based index used to measure quality of military neighborhoods. The EON may be useful in assessing broad local factors influencing health among returning veterans and spouses. More research is needed to understand geographic variation in neighborhood conditions and how those affect reintegration and mental health for military families. PMID:28936370

Hadronic resonance production measured with the ALICE detector

CERN Document Server

Dash, Ajay

2015-01-01

Hadronic resonances serve as a unique tool to study the properties of hot and dense matter pro- duced in heavy-ion collisions. These properties can be studied by measuring the ratios of hadronic resonance yields to the yields of longer-lived hadrons which can be used to investigate the re- scattering effects and the chemical freeze-out temperature. Resonance measurements in pp and p–Pb collisions provide a necessary baseline for heavy-ion data and help to disentangle the initial- state effects from medium-induced effects. The ALICE Collaboration has measured resonances such as, K ∗ (892) 0 and φ (1020) in pp, p–Pb, and Pb–Pb collisions at the LHC energies. These resonances are reconstructed via their hadronic decay channel in a wide momentum range at midrapidity. In this work, we present recent results on the transverse momentum spectra, mean transverse momentum, ratios of resonance production relative to that of long-lived hadrons.

EDITORIAL: Advances in Measurement Technology and Intelligent Instruments for Production Engineering

Science.gov (United States)

Gao, Wei; Takaya, Yasuhiro; Gao, Yongsheng; Krystek, Michael

2008-08-01

Measurement and instrumentation have long played an important role in Production Engineering, through supporting both the traditional field of manufacturing and the new field of micro/nano-technology. Papers published in this special feature were selected and updated from those presented at The 8th International Symposium on Measurement Technology and Intelligent Instruments (ISMTII 2007) held at Tohoku University, Sendai, Japan, on 24-27 September 2007. ISMTII 2007 was organized by ICMI (The International Committee on Measurements and Instrumentation), Japan Society for Precision Engineering (JSPE, Technical Committee of Intelligent Measurement with Nanoscale), Korean Society for Precision Engineering (KSPE), Chinese Society for Measurement (CSM) and Tohoku University. The conference was also supported by Center for Precision Metrology of UNC Charlotte and Singapore Institute of Manufacturing Technology. A total of 220 papers, including four keynote papers, were presented at ISMTII 2007, covering a wide range of topics, including micro/nano-metrology, precision measurement, online & in-process measurement, surface metrology, optical metrology & image processing, biomeasurement, sensor technology, intelligent measurement & instrumentation, uncertainty, traceability & calibration, and signal processing algorithms. The guest editors recommended publication of updated versions of some of the best ISMTII 2007 papers in this special feature of Measurement Science and Technology. The first two papers were presented in ISMTII 2007 as keynote papers. Takamasu et al from The University of Tokyo report uncertainty estimation for coordinate metrology, in which methods of estimating uncertainties using the coordinate measuring system after calibration are formulated. Haitjema, from Mitutoyo Research Center Europe, treats the most often used interferometric measurement techniques (displacement interferometry and surface interferometry) and their major sources of errors. Among

Using Rasch Measurement for the Development and Use of Affective Assessments in Science Education Research

Science.gov (United States)

Sondergeld, Toni A.; Johnson, Carla C.

2014-01-01

With the demand for quality quantitative instruments in the field of science education rising, additional measures of currently unassessed affective variables need to be constructed. In this study, we discuss the survey creation and evaluation process of the STEM Awareness Community Survey (SACS) through an application of Liu's (Liu, X.,…

Purchase Unwillingness and Willingness of Indonesian Consumers towards Israeli Products

Directory of Open Access Journals (Sweden)

Usep Suhud

2017-11-01

Full Text Available This research aimed to measure factors influencing purchase willingness and purchase unwillingness on Israeli products. Four predictor variables including consumer animosity, product judgment, boycott participation, and boycott motivation were used. Data were collected by an online survey, and it attracted 337 participants. Three stages of data analysis were applied, those were exploratory analyses, confirmatory factor analyses, and Structural Equation Model (SEM. In total, there were seven hypotheses tested. This research finds a significant impact of animosity on product judgment, boycott participation, and boycott motivation. Furthermore, product judgment and boycott participation significantly affect purchase willingness. Meanwhile, boycott participation and boycott motivation significantly affect purchase unwillingness.