WorldWideScience

Sample records for production losses control

  1. Determination of the Reliability of Product Quality Loss and Control ...

    African Journals Online (AJOL)

    Product quality loss was determined to be 22. However, the X-chart was found to be the most suitable and effective. The values indicate that by using the X-chart model, about 96.4% of the suspected defective products would actually survive standard tests. This model has successfully eliminated the number of the proposed ...

  2. Interaction effect of psychological distress and asthma control on productivity loss?

    Science.gov (United States)

    Moullec, Grégory; FitzGerald, J Mark; Rousseau, Roxanne; Chen, Wenjia; Sadatsafavi, Mohsen

    2015-06-01

    Little is known about the potential synergistic effect of comorbid psychological distress (PD) and uncontrolled asthma (UA) on productivity loss. We estimated the productivity loss associated with the combination of these two potentially preventable conditions in employed adults with asthma. A population-based random sample of 300 adults with asthma in British Columbia, Canada, was prospectively recruited between Dec 2010 and Aug 2012. PD and productivity loss due to absenteeism and presenteeism was measured using validated instruments, and asthma control was ascertained using 2010 Global Initiative for Asthma management strategy. We used two-part regression models to study the contribution of UA and PD to productivity loss. Compared with reference group (controlled asthma (CA)+noPD), those with UA+noPD had CAD$286 (95%CI $276-297) weekly productivity loss, and those with CA+PD had CAD$465 ($445-485). Those with UA+PD had CAD$449 (437-462) in productivity loss. There was no significant interaction effect of PD with asthma control levels on productivity loss (p=0.22). In patients without PD, uncontrolled asthma was associated with a higher productivity loss than controlled asthma, but this was not the case in patients with PD. This finding can be explained by the fact that the contribution of PD to productivity loss is so large that there is no room for synergy with asthma control. Future studies should assess the impact of interventions that modify PD in patients with asthma. Copyright ©ERS 2015.

  3. Controls upon biomass losses and char production from prescribed burning on UK moorland.

    Science.gov (United States)

    Worrall, Fred; Clay, Gareth D; May, Richard

    2013-05-15

    Prescribed burning is a common management technique used across many areas of the UK uplands. However, there are few data sets that assess the loss of biomass during burning and even fewer data on the effect of burning on above-ground carbon stocks and production of char. During fire the production of char occurs which represents a transfer of carbon from the short term bio-atmospheric cycle to the longer term geological cycle. However, biomass is consumed leading to the reduction in litter formation which is the principal mechanism for peat formation. This study aims to solve the problem of whether loss of biomass during a fire is ever outweighed by the production of refractory forms of carbon during the fire. This study combines both a laboratory study of char production with an assessment of biomass loss from a series of field burns from moorland in the Peak District, UK. The laboratory results show that there are significant effects due to ambient temperature but the most important control on dry mass loss is the maximum burn temperature. Burn temperature was also found to be linearly related to the production of char in the burn products. Optimisation of dry mass loss, char production and carbon content shows that the production of char from certain fires could store more carbon in the ecosystem than if there had been no fire. Field results show that approximately 75% of the biomass and carbon were lost through combustion, a figure comparable to other studies of prescribed fire in other settings. Char-C production was approximately 2.6% of the carbon consumed during the fire. This study has shown that there are conditions (fast burns at high temperatures) under which prescribed fire may increase C sequestration through char production and that these conditions are within existing management options available to practitioners. Copyright © 2013 Elsevier Ltd. All rights reserved.

  4. Prosody Perception and Production in Children with Hearing Loss and Age- and Gender-Matched Controls.

    Science.gov (United States)

    Kalathottukaren, Rose Thomas; Purdy, Suzanne C; Ballard, Elaine

    2017-04-01

    Auditory development in children with hearing loss, including the perception of prosody, depends on having adequate input from cochlear implants and/or hearing aids. Lack of adequate auditory stimulation can lead to delayed speech and language development. Nevertheless, prosody perception and production in people with hearing loss have received less attention than other aspects of language. The perception of auditory information conveyed through prosody using variations in the pitch, amplitude, and duration of speech is not usually evaluated clinically. This study (1) compared prosody perception and production abilities in children with hearing loss and children with normal hearing; and (2) investigated the effect of age, hearing level, and musicality on prosody perception. Participants were 16 children with hearing loss and 16 typically developing controls matched for age and gender. Fifteen of the children with hearing loss were tested while using amplification (n = 9 hearing aids, n = 6 cochlear implants). Six receptive subtests of the Profiling Elements of Prosody in Speech-Communication (PEPS-C), the Child Paralanguage subtest of Diagnostic Analysis of Nonverbal Accuracy 2 (DANVA 2), and Contour and Interval subtests of the Montreal Battery of Evaluation of Amusia (MBEA) were used. Audio recordings of the children's reading samples were rated using a perceptual prosody rating scale by nine experienced listeners who were blinded to the children's hearing status. Thirty two children, 16 with hearing loss (mean age = 8.71 yr) and 16 age- and gender-matched typically developing children with normal hearing (mean age = 8.87 yr). Assessments were completed in one session lasting 1-2 hours in a quiet room. Test items were presented using a laptop computer through loudspeaker at a comfortable listening level. For children with hearing loss using hearing instruments, all tests were completed with hearing devices set at their everyday listening setting. All PEPS

  5. Estimated costs of Sustaining Agricultural Production Through Erosional Control and Replenishment of Nutrient Losses in Kenya

    International Nuclear Information System (INIS)

    Onyango, J.W.

    1999-01-01

    Soil erosion is one of the major causes of nutrient depletion in sub-Saharan Africa. Highlights of losses from erosion can be used to explain why agricultural production in this region is not sustainable. annual macronutrient losses were calculated from experimental results at 8 sites in Kenya between 1986 and 1990. these losses were used along with the current local prices of fertiliser to estimate the annual national budget required for there replenishment. On average, 5.72, 29.3 and 0.82 kg ha -1 yr -1 of N, P and K, respectively, were lost annually. These losses are determined by soil types, slope, crop cover characteristics and rainfall amounts. soil losses can be reduced by terracing, contour farming and intercropping to improve crop cover. These efforts reduce the adverse effects of sporadic rainfall on fragile soil types. in order to ensure sustainability however, control measures have to be supplemented by national additions of 64 000 t, 323 000 t and 10 000 t of N, P and K respectively per year. The equivalent costs of these fertilisers will be Ksh 1,408 Ksh 8721 Ksh 220 million for the respective nutrients. This would require a total of some US$256 million (Ksh 10 349 million) annually from the national budget

  6. Release of fission products during controlled loss-of-coolant accidents and hypothetical core meltdown accidents

    International Nuclear Information System (INIS)

    Albrecht, H.; Malinauskas, A.P.

    1978-01-01

    A few years ago the Projekt Nukleare Sicherheit joined the United States Nuclear Regulatory Commission in the development of a research program which was designed to investigate fission product release from light water reactor fuel under conditions ranging from spent fuel shipping cask accidents to core meltdown accidents. Three laboratories have been involved in this cooperative effort. At Argonne National Laboratory (ANL), the research effort has focused on noble gas fission product release, whereas at Oak Ridge National Laboratory (ORNL) and at Kernforschungszentrum Karlsruhe (KfK), the studies have emphasized the release of species other than the noble gases. In addition, the ORNL program has been directed toward the development of fission product source terms applicable to analyses of spent fuel shipping cask accidents and controlled loss-of-coolant accidents, and the KfK program has been aimed at providing similar source terms which are characteristic of core meltdown accidents. The ORNL results are presented for fission product release from defected fuel rods into a steam atmosphere over the temperature range 500 to 1200 0 C, and the KfK results for release during core meltdown sequences

  7. Asthma control and productivity loss in those with work-related asthma: A population-based study.

    Science.gov (United States)

    Wong, Alyson; Tavakoli, Hamid; Sadatsafavi, Mohsen; Carlsten, Chris; FitzGerald, J Mark

    2017-06-01

    In Canada, asthma is the third leading cause of work loss, yet little is known about the associated productivity loss. The goal of this study was to look at the relationship between asthma control and productivity loss, particularly contrasting those with work-related asthma (WRA) and non-work-related asthma (NWRA). A population-based random sample of adults with asthma in British Columbia, Canada, was prospectively recruited. Asthma control was graded according to Global Initiative for Asthma classification, while productivity loss and presence of WRA was assessed using questionnaires. Ordinal regression models were then used to associate WRA with asthma control. Generalized linear models were applied to estimate the average productivity loss associated with different levels of asthma control among those with WRA and NWRA. The study included 300 employed adults. Sixty (20%) had WRA. The odds of being controlled were significantly lower in those with WRA (OR = 0.23, 95% CI: 0.09, 0.56; P asthma had a significant difference in productivity loss due to presenteeism ($659.1 [95% CI: 12.9, 1581.5; P = 0.04]), but not absenteeism ($88.7 [95% CI: -86.5, 279.6; P = 0.35]), when compared to those with NWRA and uncontrolled asthma. There was no significant difference when a similar comparison was made for those with controlled or partially controlled asthma. WRA is associated with worse asthma control and increased productivity loss. Presenteeism makes a significant contribution to productivity loss and should be considered when evaluating the overall economic burden of asthma, particularly WRA.

  8. A randomized controlled trial to determine the efficacy of a high carbohydrate and high protein ready-to-eat food product for weight loss.

    Science.gov (United States)

    Fuller, N R; Fong, M; Gerofi, J; Leung, L; Leung, C; Denyer, G; Caterson, I D

    2016-04-01

    Incorporating meal replacements has been shown to produce a significantly greater weight loss than a conventional reduced calorie diet. Ready-to-eat conventional foods may also be effective in this role and provide additional benefit because of their palatability, acceptance and enjoyment and thus increase dietary compliance. This trial investigated the efficacy of a ready-to-eat food product (Vita-Weat biscuit) that is both high in carbohydrate and high in protein as part of a diet prescription for weight loss in an overweight and obese population group. A total of 76 participants were randomized to a 6-week weight loss intervention including the ready-to-eat food product (intervention group) or advice on the 'Australian Guide to Healthy Eating' (control group). Both groups lost approximately 2 kg weight which equated to a reduction in body mass index of 0.70 kg m(-2) . There was no significant difference in percentage weight loss from screening to 6 weeks between the two groups; mean difference for the intervention vs. -0.20% (95% confidence interval: -0.96, 1.36); P = 0.73. Both diets were nutritionally matched and well-accepted over the 6-week period. This study shows that the inclusion of a ready-to-eat food product can be included as part of a dietary programme to achieve a clinically significant weight loss over a short period. This may have benefit when incorporated into an individual's meal plan intermittently to assist weight control. It also provides support for current public health nutritional guidelines as the participants in this study following such advice were also successful in achieving a clinically meaningful weight loss. © 2016 World Obesity.

  9. Ethnobotanical, micrographic and pharmacological features of plant-based weight-loss products sold in naturist stores in Mexico City: the need for better quality control

    Directory of Open Access Journals (Sweden)

    Patricia Marta Arenas

    2013-09-01

    Full Text Available The consumption of dietary supplements and herbal mixtures to promote weight loss is a common practice in the West. This study was undertaken in Mexico City, surveying stores selling "natural products" at subway stations. The aims of this paper were as follows: to compile a record of plant products marketed as slimming aids and of retailer perceptions of these products; to review the pharmacological and ethnobotanical literature on the species declared; and to create an optical micrograph of a subset of products to verify the accuracy of the list of component plant species shown on the labels. We applied the techniques of observation, semi-structured interviews and free-listing at the retail stores. Results are presented for the 75 species recorded in the 41 weight-loss products surveyed, showing which plant parts are used, the geographical distribution of the species, pharmacological effects, dosage, route of administration and method of preparation, as well as ethnobotanical information derived from fieldwork. We discuss the values assigned to the species used. Microscopic analyses revealed that many of the plant ingredients declared were absent, highlighting the need for greater quality control and safety of these herbal remedies.

  10. Analysis of coolability of the control rods of a Savannah River Site production reactor with loss of normal forced convection cooling

    International Nuclear Information System (INIS)

    Easterling, T.C.; Hightower, N.T.; Smith, D.C.; Amos, C.N.

    1992-01-01

    An analytical study of the coolability of the control rods in the Savannah River Site (SRS) K-Production Reactor under conditions of loss of normal forced convection cooling has been performed. The study was performed as part of the overall safety analysis of the reactor supporting its restart. The analysis addresses the buoyancy-driven flow over the control rods that occurs when forced cooling is lost, and the limit of critical heat flux that sets the acceptance criteria for the study. The objective of the study is to demonstrate that the control rods will remain cooled at powers representative of those anticipated for restart of the reactor. The study accomplishes this objective with a very tractable simplified analysis for the modest restart power. In addition, a best-estimate calculation is performed, and the results are compared to results from sub-scale scoping experiments. 5 refs

  11. Production loss among employees perceiving work environment problems.

    Science.gov (United States)

    Lohela-Karlsson, Malin; Hagberg, Jan; Bergström, Gunnar

    2015-08-01

    The overall aim of this explorative study was to investigate the relationship between factors in the psychosocial work environment and work environment-related production loss. Employees at a Swedish university were invited to answer a workplace questionnaire and were selected for this study if they reported having experienced work environment-related problems in the past 7 days (n = 302). A stepwise logistic regression and a modified Poisson regression were used to identify psychosocial work factors associated with work environment-related production loss as well as to identify at what level those factors are associated with production loss. Employees who reported having experienced work environment problems but also fair leadership, good social climate, role clarity and control of decision had significantly lower levels of production loss, whereas employees who reported inequality and high decision demands reported significantly higher levels of production loss. Never or seldom experiencing fair leadership, role clarity, equality, decision demands and good social climate increase the risk of production loss due to work environment problems, compared to those who experience these circumstances frequently, always or most of the time. Several psychosocial work factors are identified as factors associated with a reduced risk of production losses among employees despite the nature of the work environment problem. Knowledge of these factors may be important not only to reduce employee ill-health and the corresponding health-related production loss, but also reduce immediate production loss due to work environment-related problems.

  12. The impact of comorbidities on productivity loss in asthma patients.

    Science.gov (United States)

    Ehteshami-Afshar, Solmaz; FitzGerald, J Mark; Carlsten, Christopher; Tavakoli, Hamid; Rousseau, Roxanne; Tan, Wan Cheng; Rolf, J Douglass; Sadatsafavi, Mohsen

    2016-08-26

    Health-related productivity loss is an important, yet overlooked, component of the economic burden of disease in asthma patients of a working age. We aimed at evaluating the effect of comorbidities on productivity loss among adult asthma patients. In a random sample of employed adults with asthma, we measured comorbidities using a validated self-administered comorbidity questionnaire (SCQ), as well as productivity loss, including absenteeism and presenteeism, using validated instruments. Productivity loss was measured in 2010 Canadian dollars ($). We used a two-part regression model to estimate the adjusted difference of productivity loss across levels of comorbidity, controlling for potential confounding variables. 284 adults with the mean age of 47.8 (SD 11.8) were included (68 % women). The mean SCQ score was 2.47 (SD 2.97, range 0-15) and the average productivity loss was $317.5 per week (SD $858.8). One-unit increase in the SCQ score was associated with 14 % (95 % CI 1.02-1.28) increase in the odds of reporting productivity loss, and 9.0 % (95 % CI 1.01-1.18) increase in productivity loss among those reported any loss of productivity. A person with a SCQ score of 15 had almost $1000 per week more productivity loss than a patient with a SCQ of zero. Our study deepens the evidence-base on the burden of asthma, by demonstrating that comorbidities substantially decrease productivity in working asthma patients. Asthma management strategies must be cognizant of the role of comorbidities to properly incorporate the effect of comorbidity and productivity loss in estimating the benefit of disease management strategies.

  13. Virtual Nitrogen Losses from Organic Food Production

    Science.gov (United States)

    Cattell Noll, L.; Galloway, J. N.; Leach, A. M.; Seufert, V.; Atwell, B.; Shade, J.

    2015-12-01

    Reactive nitrogen (Nr) is necessary for crop and animal production, but when it is lost to the environment, it creates a cascade of detrimental environmental impacts. The nitrogen challenge is to maximize the food production benefits of Nr, while minimizing losses to the environment. The first nitrogen footprint tool was created in 2012 to help consumers learn about the Nr losses to the environment that result from an individual's lifestyle choices. The nitrogen lost during food production was estimated with virtual nitrogen factors (VNFs) that quantify the amount of nitrogen lost to the environment per unit nitrogen consumed. Alternative agricultural systems, such as USDA certified organic farms, utilize practices that diverge from conventional production. In order to evaluate the potential sustainability of these alternative agricultural systems, our team calculated VNFs that reflect organic production. Initial data indicate that VNFs for organic grains and organic starchy roots are comparable to, but slightly higher than conventional (+10% and +20% respectively). In contrast, the VNF for organic vegetables is significantly higher (+90%) and the VNF for organic legumes is significantly lower (-90%). Initial data on organic meat production shows that organic poultry and organic pigmeat are comparable to conventional production (both <5% difference), but that the organic beef VNF is significantly higher (+30%). These data show that in some cases organic and conventional production are comparable in terms of nitrogen efficiency. However, since conventional production relies heavily on the creation of new reactive nitrogen (Haber-Bosch, biological nitrogen fixation) and organic production primarily utilizes already existing reactive nitrogen (manure, crop residue, compost), the data also show that organic production contributes less new reactive nitrogen to the environment than conventional production (approximately 70% less). Therefore, we conclude that on a local

  14. Wetland Loss Patterns and Inundation-Productivity ...

    Science.gov (United States)

    Tidal salt marsh is a key defense against, yet is especially vulnerable to, the effects of accelerated sea level rise. To determine whether salt marshes in southern New England will be stable given increasing inundation over the coming decades, we examined current loss patterns, inundation-productivity feedbacks, and sustaining processes. A multi-decadal analysis of salt marsh aerial extent using historic imagery and maps revealed that salt marsh vegetation loss is both widespread and accelerating, with vegetation loss rates over the past four decades summing to 17.3 %. Landward retreat of the marsh edge, widening and headward expansion of tidal channel networks, loss of marsh islands, and the development and enlargement of interior depressions found on the marsh platform contributed to vegetation loss. Inundation due to sea level rise is strongly suggested as a primary driver: vegetation loss rates were significantly negatively correlated with marsh elevation (r2 = 0.96; p = 0.0038), with marshes situated below mean high water (MHW) experiencing greater declines than marshes sitting well above MHW. Growth experiments with Spartina alterniflora, the Atlantic salt marsh ecosystem dominant, across a range of elevations and inundation regimes further established that greater inundation decreases belowground biomass production of S. alterniflora and, thus, negatively impacts organic matter accumulation. These results suggest that southern New England salt ma

  15. Risk Of Loss Of Productivity In Workplaces

    Directory of Open Access Journals (Sweden)

    Wafi Assiri

    2015-08-01

    Full Text Available In every organization there exist some unavoidable cost when running any business. However these costs can be minimized by managing the factors that contribute to increased business cost and finding ways to prevent risks before they occur. This paper examines one of these factors which is loss of productivity in the workplace. The paper examines the risks of loss of productivity what causes these risks and in what ways will the business be affected by them. This paper also present the various ways a business can manage the risks by providing ways on how the business can prepare for any incidents with regards to the risks. And because its impossible to manage anything that you cant measure ways in which productivity can be measured have been addressed. Finally the paper addresses ways in which the business can improve its workplace productivity to achieve the business goals and ensure continuity of the business.

  16. Epidemiology, production losses, and control measures associated with an outbreak of avian influenza subtype H7N2 in Pennsylvania (1996-98).

    Science.gov (United States)

    Henzler, D J; Kradel, D C; Davison, S; Ziegler, A F; Singletary, D; DeBok, P; Castro, A E; Lu, H; Eckroade, R; Swayne, D; Lagoda, W; Schmucker, B; Nesselrodt, A

    2003-01-01

    An outbreak of H7N2 low-pathogenicity (LP) avian influenza (AI) occurred in a two-county area in Pennsylvania from December of 1996 through April of 1998. The outbreak resulted in infection of 2,623,116 commercial birds on 25 premises encompassing 47 flocks. Twenty-one (one premise with infection twice) of the twenty-five infected premises housed egg-laying chickens and one premise each had turkeys, layer pullets, quail, and a mixed backyard dealer flock. Despite dose proximity of infected flocks to commercial broiler flocks, no infected broilers were identified. Experimentally, when market age broilers were placed on an influenza-infected premise they seroconverted and developed oviduct lesions. The outbreak was believed to have originated from two separate introductions into commercial layer flocks from premises and by individuals dealing in sales of live fowl in the metropolitan New York and New Jersey live-bird markets. Source flocks for these markets are primarily in the northeast and mid-Atlantic areas, including Pennsylvania. Mixed fowl sold include ducks, geese, guinea hens, quail, chukar partridges, and a variety of chickens grown on perhaps hundreds of small farms. Infections with the H7N2 AI virus were associated with variable morbidity and temporary decreases in egg production ranging from 1.6% to 29.1% in commercial egg-laying chickens. Egg production losses averaged 4.0 weeks duration. Mortality ranged from 1.5 to 18.3 times normal (mean of 4.3 times normal). Duration of mortality ranged from 2 to 13 weeks (average of 3.9 weeks) in flocks not depopulated. Lesions observed were primarily oviducts filled with a mucous and white gelatinous exudates and atypical egg yolk peritonitis. Quarantine of premises and complete depopulation were the early measures employed in control of this outbreak. Epidemiological studies suggested that depopulation furthered the spread of influenza to nearby flocks. Thereafter, later control measures included quarantine

  17. Projecting productivity losses for cancer-related mortality 2011 - 2030.

    Science.gov (United States)

    Pearce, Alison; Bradley, Cathy; Hanly, Paul; O'Neill, Ciaran; Thomas, Audrey Alforque; Molcho, Michal; Sharp, Linda

    2016-10-18

    When individuals stop working due to cancer this represents a loss to society - the loss of productivity. The aim of this analysis was to estimate productivity losses associated with premature mortality from all adult cancers and from the 20 highest mortality adult cancers in Ireland in 2011, and project these losses until 2030. An incidence-based method was used to estimate the cost of cancer deaths between 2011 and 2030 using the Human Capital Approach. National data were used for cancer, population and economic inputs. Both paid work and unpaid household activities were included. Sensitivity analyses estimated the impact of assumptions around future cancer mortality rates, retirement ages, value of unpaid work, wage growth and discounting. The 233,000 projected deaths from all invasive cancers in Ireland between 2011 and 2030 will result in lost productivity valued at €73 billion; €13 billion in paid work and €60 billion in household activities. These losses represent approximately 1.4 % of Ireland's GDP annually. The most costly cancers are lung (€14.4 billion), colorectal and breast cancer (€8.3 billion each). However, when viewed as productivity losses per cancer death, testis (€364,000 per death), cervix (€155,000 per death) and brain cancer (€136,000 per death) are most costly because they affect working age individuals. An annual 1 % reduction in mortality reduces productivity losses due to all invasive cancers by €8.5 billion over 20 years. Society incurs substantial losses in productivity as a result of cancer-related mortality, particularly when household production is included. These estimates provide valuable evidence to inform resource allocation decisions in cancer prevention and control.

  18. Statistical quality control a loss minimization approach

    CERN Document Server

    Trietsch, Dan

    1999-01-01

    While many books on quality espouse the Taguchi loss function, they do not examine its impact on statistical quality control (SQC). But using the Taguchi loss function sheds new light on questions relating to SQC and calls for some changes. This book covers SQC in a way that conforms with the need to minimize loss. Subjects often not covered elsewhere include: (i) measurements, (ii) determining how many points to sample to obtain reliable control charts (for which purpose a new graphic tool, diffidence charts, is introduced), (iii) the connection between process capability and tolerances, (iv)

  19. Investigating the loss of work productivity due to symptomatic leiomyoma.

    Science.gov (United States)

    Hasselrot, Klara; Lindeberg, Mia; Konings, Peter; Kopp Kallner, Helena

    2018-01-01

    Leiomyoma affects up to 50% of fertile women, leading to morbidity such as bleeding or pain. The effect of symptomatic leiomyoma on the productivity of employed women is understudied. The present study investigates productivity loss in a Swedish setting in women with symptomatic leiomyoma compared to healthy women. Women seeking care for leiomyoma and heavy menstrual bleeding (HMB) were recruited at nine Swedish sites. Healthy controls with self-perceived mild to normal menstruation were recruited at routine visits. Cases and controls were employed without option to work from home. After recruitment, all women reported the work productivity and activity impairment (WPAI) questionnaire, the pictorial blood assessment chart (PBAC) and pain on the visual analog scale (VAS). Women with symptomatic leiomyoma (n = 88) missed more working time during menses compared to asymptomatic controls (n = 34): 7.6 vs 0.2% p = 0.003. The proportion of impairment while working was also significantly higher in women with symptomatic leiomyoma (43.8 vs 12.1% p100). Symptomatic leiomyoma leads to loss of working hours as well as loss of productivity during working hours, and affects women in other daily activities. Increased awareness of the impact of leiomyomas on women's lives is needed, and timely and appropriate management of the symptomatic leiomyomas could improve work productivity and quality of life.

  20. 7 CFR 760.812 - Production losses; participant responsibility.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 7 2010-01-01 2010-01-01 false Production losses; participant responsibility. 760.812....812 Production losses; participant responsibility. (a) Where available and determined accurate by FSA, RMA loss records will be used for insured crops. (b) If RMA loss records are not available, or if the...

  1. Water losses during technical snow production

    Science.gov (United States)

    Grünewald, Thomas; Wolfsperger, Fabian

    2017-04-01

    These days, the production of technical snow can be seen as a prerequisite for winter tourism. Huge amounts of water are used for technical snow production by ski resorts, especially in the beginning of the winter season. The aim is to guarantee an appropriate amount of snow to reliably provide optimal ski runs until the date of season opening in early December. Technical snow is generated by pumping pressurized water through the nozzles of a snow machine and dispersing the resulting spray of small water droplets which freeze during their travel to the ground. Cooling and freezing of the droplets can only happen if energy is emitted to the air mass surrounding the droplets. This heat transfer is happening through convective cooling and though evaporation and sublimation of water droplets and ice particles. This means that also mass is lost from the droplets and added in form of vapor to the air. It is important to note that not all water that is pumped through the snow machine is converted to snow distributed on the ground. Significant amounts of water are lost due to wind drift, sublimation and evaporation while droplets are traveling through the air or to draining of water which is not fully frozen when arriving at the ground. Studies addressing this question are sparse and the quantity of the water losses is still unclear. In order to assess this question in more detail, we obtained several systematic field observations at a test site near Davos, Switzerland. About a dozen of snow making tests had been performed during the last winter seasons. We compare the amount of water measured at the intake of the snow machine with the amount of snow accumulating at the ground during a night of snow production. The snow mass was calculated from highly detailed repeated terrestrial laser scanning measurements in combination with manually gathered snow densities. In addition a meteorological station had been set up in the vicinity observing all relevant meteorological

  2. Production Time Loss Reduction in Sauce Production Line by Lean Six Sigma Approach

    Science.gov (United States)

    Ritprasertsri, Thitima; Chutima, Parames

    2017-06-01

    In all industries, time losses, which are incurred in processing are very important. As a result, losses are incurred in productivity and cost. This research aimed to reduce lost time that occurs in sauce production line by using the lean six sigma approach. The main objective was to reduce the time for heating sauce which causes a lot of time lost in the production line which affects productivity. The methodology was comprised of the five-phase improvement model of Six Sigma. This approach begins with defining phase, measuring phase, analysing phase, improving phase and controlling phase. Cause-and-effect matrix and failure mode and effect analysis (FMEA) were adopted to screen the factors which affect production time loss. The results showed that the percentage of lost time from heating sauce reduced by 47.76%. This increased productivity to meet the plan.

  3. The Clinical and Occupational Correlates of Work Productivity Loss Among Employed Patients With Depression

    Science.gov (United States)

    Lerner, Debra; Adler, David A.; Chang, Hong; Berndt, Ernst R.; Irish, Julie T.; Lapitsky, Leueen; Hood, Maggie Y.; Reed, John; Rogers, William H.

    2014-01-01

    Employers who are developing strategies to reduce health-related productivity loss may benefit from aiming their interventions at the employees who need them most. We determined whether depression’s negative productivity impact varied with the type of work employees performed. Subjects (246 with depression and 143 controls) answered the Work Limitations Questionnaire and additional work questions. Occupational requirements were measured objectively. In multiple regression analyses, productivity was most influenced by depression severity (P increased employee vulnerability to productivity loss. Losses increased when employees had occupations requiring proficiency in decision-making and communication and/or frequent customer contact (P productivity loss by identifying health and productivity improvement priorities. PMID:15194895

  4. Cumulative exergy losses associated with the production of lead metal

    Energy Technology Data Exchange (ETDEWEB)

    Szargut, J [Technical Univ. of Silesia, Gliwice (PL). Inst. of Thermal-Engineering; Morris, D R [New Brunswick Univ., Fredericton, NB (Canada). Dept. of Chemical Engineering

    1990-08-01

    Cumulative exergy losses result from the irreversibility of the links of a technological network leading from raw materials and fuels extracted from nature to the product under consideration. The sum of these losses can be apportioned into partial exergy losses (associated with particular links of the technological network) or into constituent exergy losses (associated with constituent subprocesses of the network). The methods of calculation of the partial and constituent exergy losses are presented, taking into account the useful byproducts substituting the major products of other processes. Analyses of partial and constituent exergy losses are made for the technological network of lead metal production. (author).

  5. Asthma-related productivity losses in Alberta, Canada

    Directory of Open Access Journals (Sweden)

    Nguyen X Thanh

    2009-03-01

    Full Text Available Nguyen X Thanh, Arto Ohinmaa, Charles YanInstitute of Health Economics, Edmonton, Alberta, CanadaObjectives: To estimate the number and cost of asthma-related productivity loss days due to absenteeism and presenteeism (at work but not fully functioning in Alberta in 2005.Methods: Using data from the 2005 Canadian Community Health Survey, this study focused on people of working age (18–64 years, who reported having an asthma diagnosis. Total asthma-related disability days, including in-bed days and activity-restricted days, were estimated by multiplying the difference in the means of total disability days between asthmatics and nonasthmatics adjusted for sociodemographic characteristics and other health conditions by a multiple linear regression, with the number of asthmatics in the population. Number of productivity loss days was a sum between the number of in-bed days (absenteeism and the number of activity-restricted days multiplied by a reduction in functional level (presenteeism, adjusted for five working days per week. Other data from Alberta or Canadian published literature, such as a reduction in functional level of 20%–30%, a labor participation rate of 73%, and an average wage of $158 per day in 2005, were also used for analyses.Results: The prevalence of asthma was estimated at 8.5% among approximately 2.1 million people of working age in Alberta in 2005. The difference in the means of total disability days between asthmatics and nonasthmatics was 0.487 (95% CI: 0.286–0.688 in a period of two weeks or 12.7 (7.5–17.9 in one year. With the reduction in functional level of 20%–30%, the number of asthma-related productivity loss days was estimated from 442 (259–624 to 533 (313–753 thousand, respectively. The corresponding cost was from $70 ($41–$99 to $84 ($49–$119 million. Of these, the presenteeism accounted for 42% to 52%.Conclusions: The results suggest that an improvement in the controlling of asthma could have a

  6. Adverse Psychiatric Effects Associated with Herbal Weight-Loss Products

    Directory of Open Access Journals (Sweden)

    F. Saverio Bersani

    2015-01-01

    Full Text Available Obesity and overeating are among the most prevalent health concerns worldwide and individuals are increasingly using performance and image-enhancing drugs (PIEDs as an easy and fast way to control their weight. Among these, herbal weight-loss products (HWLPs often attract users due to their health claims, assumed safety, easy availability, affordable price, extensive marketing, and the perceived lack of need for professional oversight. Reports suggest that certain HWLPs may lead to onset or exacerbation of psychiatric disturbances. Here we review the available evidence on psychiatric adverse effects of HWLPs due to their intrinsic toxicity and potential for interaction with psychiatric medications.

  7. Vector Control Using Series Iron Loss Model of Induction, Motors and Power Loss Minimization

    OpenAIRE

    Kheldoun Aissa; Khodja Djalal Eddine

    2009-01-01

    The iron loss is a source of detuning in vector controlled induction motor drives if the classical rotor vector controller is used for decoupling. In fact, the field orientation will not be satisfied and the output torque will not truck the reference torque mostly used by Loss Model Controllers (LMCs). In addition, this component of loss, among others, may be excessive if the vector controlled induction motor is driving light loads. In this paper, the series iron loss model ...

  8. Effects of wireless packet loss in industrial process control systems.

    Science.gov (United States)

    Liu, Yongkang; Candell, Richard; Moayeri, Nader

    2017-05-01

    Timely and reliable sensing and actuation control are essential in networked control. This depends on not only the precision/quality of the sensors and actuators used but also on how well the communications links between the field instruments and the controller have been designed. Wireless networking offers simple deployment, reconfigurability, scalability, and reduced operational expenditure, and is easier to upgrade than wired solutions. However, the adoption of wireless networking has been slow in industrial process control due to the stochastic and less than 100% reliable nature of wireless communications and lack of a model to evaluate the effects of such communications imperfections on the overall control performance. In this paper, we study how control performance is affected by wireless link quality, which in turn is adversely affected by severe propagation loss in harsh industrial environments, co-channel interference, and unintended interference from other devices. We select the Tennessee Eastman Challenge Model (TE) for our study. A decentralized process control system, first proposed by N. Ricker, is adopted that employs 41 sensors and 12 actuators to manage the production process in the TE plant. We consider the scenario where wireless links are used to periodically transmit essential sensor measurement data, such as pressure, temperature and chemical composition to the controller as well as control commands to manipulate the actuators according to predetermined setpoints. We consider two models for packet loss in the wireless links, namely, an independent and identically distributed (IID) packet loss model and the two-state Gilbert-Elliot (GE) channel model. While the former is a random loss model, the latter can model bursty losses. With each channel model, the performance of the simulated decentralized controller using wireless links is compared with the one using wired links providing instant and 100% reliable communications. The sensitivity of the

  9. Problems of finding production losses in smoke areas

    Energy Technology Data Exchange (ETDEWEB)

    Vins, B

    1971-01-01

    The world-wide research results obtained up to now give evidence that the injurious effects of emissions in forest stands occur in the form of the decrease of diameter increment leading to premature die-back of trees. The effects of emissions are different both in individual tree species and in stand components. The occurrence and size of increment losses are also influenced by the interaction of climate conditions and concentration of pollutants in the atmosphere. Combining original methodical procedures and laboratory equipment for production ecology with computer processing techniques bring about favorable conditions for the solution of problems concerning the emission effects on the production of forest stands. No solution has been found as yet for the problem of diameter increment decrease differentiation based on age and social position of trees. Research work should provide data necessary for the economic evaluation of losses in the main smoke areas and for the choice of suitable economic measures aimed at the mitigation of injuries. This study indicates that it is the modified increment boring method which becomes an efficient method for the control of production processes and for the evaluation of increment changes both in research work and in practice.

  10. Charged fusion product and fast ion loss in TFTR

    International Nuclear Information System (INIS)

    Zweben, S.J.; Darrow, D.S.; Fredrickson, E.D.; Mynick, H.E.; White, R.B.; Biglari, H.; Bretz, N.; Budny, R.; Bush, C.E.; Chang, C.S.; Chen, L.; Cheng, C.Z.; Fu, G.Y.; Hammett, G.W.; Hawryluk, R.J.; Hosea, J.; Johnson, L.; Mansfield, D.; McGuire, K.; Medley, S.S.; Nazikian, R.; Owens, D.K.; Park, H.; Park, J.; Phillips, C.K.; Schivell, J.; Stratton, B.C.; Ulrickson, M.; Wilson, R.; Young, K.M.; Fisher, R.; McChesney, J.; Fonck, R.; McKee, G.; Tuszewski, M.

    1993-03-01

    Several different fusion product and fast ion loss processes have been observed in TFTR using an array of pitch angle, energy and time resolved scintillator detectors located near the vessel wall. For D-D fusion products (3 MeV protons and 1 MeV tritons) the observed loss is generally consistent with expected first-orbit loss for Ip I MA. However, at higher currents, Ip = 1.4--2.5 MA, an NM induced D-D fusion product loss can be up to 3-4 times larger than the first-orbit loss, particularly at high beam powers, P ≥ 25 MW. The MHD induced loss of 100 KeV neutron beam ions and ∼0.5 MeV ICRF minority tail tons has also been measured ≤ 459 below the outer midplane. be potential implications of these results for D-T alpha particle experiments in TFTR and ITER are described

  11. The cost of productivity losses associated with allergic rhinitis.

    Science.gov (United States)

    Crystal-Peters, J; Crown, W H; Goetzel, R Z; Schutt, D C

    2000-03-01

    To measure the cost of absenteeism and reduced productivity associated with allergic rhinitis. The National Health Interview Survey (NHIS) was used to obtain information on days lost from work and lost productivity due to allergic rhinitis. Wage estimates for occupations obtained from the Bureau of Labor Statistics (BLS) were used to calculate the costs. Productivity losses associated with a diagnosis of allergic rhinitis in the 1995 NHIS were estimated to be $601 million. When additional survey information on the use of sedating over-the-counter (OTC) allergy medications, as well as workers' self-assessments of their reduction in at-work productivity due to allergic rhinitis, were considered, the estimated productivity loss increased dramatically. At-work productivity losses were estimated to range from $2.4 billion to $4.6 billion. Despite the inherent difficulty of measuring productivity losses, our lowest estimate is several times higher than previous estimates of the indirect medical costs associated with allergic rhinitis treatment. The most significant productivity losses resulted not from absenteeism but from reduced at-work productivity associated with the use of sedating OTC antihistamines.

  12. Software product quality control

    CERN Document Server

    Wagner, Stefan

    2013-01-01

    Quality is not a fixed or universal property of software; it depends on the context and goals of its stakeholders. Hence, when you want to develop a high-quality software system, the first step must be a clear and precise specification of quality. Yet even if you get it right and complete, you can be sure that it will become invalid over time. So the only solution is continuous quality control: the steady and explicit evaluation of a product's properties with respect to its updated quality goals.This book guides you in setting up and running continuous quality control in your environment. Star

  13. Productivity losses in chronic obstructive pulmonary disease: a population-based survey.

    Science.gov (United States)

    Erdal, Marta; Johannessen, Ane; Askildsen, Jan Erik; Eagan, Tomas; Gulsvik, Amund; Grønseth, Rune

    2014-01-01

    We aimed to estimate incremental productivity losses (sick leave and disability) of spirometry-defined chronic obstructive pulmonary disease (COPD) in a population-based sample and in hospital-recruited patients with COPD. Furthermore, we examined predictors of productivity losses by multivariate analyses. We performed four quarterly telephone interviews of 53 and 107 population-based patients with COPD and controls, as well as 102 hospital-recruited patients with COPD below retirement age. Information was gathered regarding annual productivity loss, exacerbations of respiratory symptoms and comorbidities. Incremental productivity losses were estimated by multivariate quantile median regression according to the human capital approach, adjusting for sex, age, smoking habits, education and lung function. Main effect variables were COPD/control status, number of comorbidities and exacerbations of respiratory symptoms. Altogether 55%, 87% and 31% of population-based COPD cases, controls and hospital patients, respectively, had a paid job at baseline. The annual incremental productivity losses were 5.8 (95% CI 1.4 to 10.1) and 330.6 (95% CI 327.8 to 333.3) days, comparing population-recruited and hospital-recruited patients with COPD to controls, respectively. There were significantly higher productivity losses associated with female sex and less education. Additional adjustments for comorbidities, exacerbations and FEV1% predicted explained all productivity losses in the population-based sample, as well as nearly 40% of the productivity losses in hospital-recruited patients. Annual incremental productivity losses were more than 50 times higher in hospital-recruited patients with COPD than that of population-recruited patients with COPD. To ensure a precise estimation of societal burden, studies on patients with COPD should be population-based.

  14. Predicting Loss-of-Control Boundaries Toward a Piloting Aid

    Science.gov (United States)

    Barlow, Jonathan; Stepanyan, Vahram; Krishnakumar, Kalmanje

    2012-01-01

    This work presents an approach to predicting loss-of-control with the goal of providing the pilot a decision aid focused on maintaining the pilot's control action within predicted loss-of-control boundaries. The predictive architecture combines quantitative loss-of-control boundaries, a data-based predictive control boundary estimation algorithm and an adaptive prediction method to estimate Markov model parameters in real-time. The data-based loss-of-control boundary estimation algorithm estimates the boundary of a safe set of control inputs that will keep the aircraft within the loss-of-control boundaries for a specified time horizon. The adaptive prediction model generates estimates of the system Markov Parameters, which are used by the data-based loss-of-control boundary estimation algorithm. The combined algorithm is applied to a nonlinear generic transport aircraft to illustrate the features of the architecture.

  15. REFLECTIONS ON THE NICE DECISION TO REJECT PATIENT PRODUCTION LOSSES.

    Science.gov (United States)

    Shearer, James; Byford, Sarah; Birch, Steve

    2017-01-01

    Patient production losses occur when individuals' capacities to work, whether paid or unpaid, are impaired by illness, treatment, disability, or death. There is controversy about whether and how to include patient production losses in economic evaluations in health care. Patient production losses have not previously been considered when evaluating medications for reimbursement under the U.K. National Health Service. Proposals for value-based assessment of health technologies in the United Kingdom created renewed interest in whether and how to include costs from a wider societal perspective, such as patient production losses, within economic evaluation of healthcare interventions. A narrative review was undertaken of theoretical, ethical, and policy issues that might inform decisions that involve the normative question of whether or not to include patient production losses in economic evaluation. It seems difficult to reconcile the implications of including patient production losses with the objectives of a healthcare system dedicated to providing universal healthcare coverage without regard to patients' ability to pay. Tax payer funded healthcare systems may legitimately adopt maximands other than health gain, but these will be at the opportunity cost of less than maximum health gains.

  16. ICRF-induced fusion product loss in TFTR

    International Nuclear Information System (INIS)

    Darrow, D.S.; Chang, C.S.; Zweben, S.J.

    1994-01-01

    When ICRF power is applied to plasmas in which there is no externally-supplied minority species, an enhanced loss of DD fusion products results. The characteristics of the loss are consistent with particles at or near the birth energy having their perpendicular velocity increased by the ICRF such that those near the passing/trapped boundary are carried into the first orbit loss cone. A rudimentary model of this process predicts losses of a magnitude similar to those seen. Predictions based upon this data for hypothetical ICRF ash removal from reactor plasmas suggest that the technique will not be energy efficient

  17. ICRF-induced DD fusion product losses in TFTR

    International Nuclear Information System (INIS)

    Darrow, D.S.; Zweben, S.J.; Budny, R.V.

    1994-10-01

    When ICRF power is applied to TFTR plasmas in which there is no externally-supplied minority species, an enhanced loss of DD fusion products results. The characteristics of the loss are consistent with particles at or near the birth energy having their perpendicular velocity increased by the ICRF such that those near the passing/trapped boundary are carried into the first orbit loss cone. A rudimentary model of this process predicts losses of a magnitude similar to those seen. Extrapolations based upon this data for hypothetical ICRF ash removal from reactor plasmas suggest that the technique will not be energy efficient

  18. Fusion-product transport in axisymmetric tokamaks: losses and thermalization

    International Nuclear Information System (INIS)

    Hively, L.M.

    1980-01-01

    High-energy fusion-product losses from an axisymmetric tokamak plasma are studied. Prompt-escape loss fluxes (i.e. prior to slowing down) are calculated including the non-separable dependence of flux as a function of poloidal angle and local angle-of-incidence at the first wall. Fusion-product (fp) thermalization and heating are calculated assuming classical slowing down. The present analytical model describes fast ion orbits and their distribution function in realistic, high-β, non-circular tokamak equilibria. First-orbit losses, trapping effects, and slowing-down drifts are also treated

  19. H-Infinity Control Design Considering Packet Loss as a Disturbance for Networked Control Systems

    OpenAIRE

    OGURA, Takashi; KOBAYASHI, Kentaro; OKADA, Hiraku; KATAYAMA, Masaaki

    2017-01-01

    This paper studies H∞ control for networked control systems with packet loss. In networked control systems, packet loss is one of major weakness because the control performance deteriorates due to packet loss. H∞ control, which is one of robust control, can design a controller to reduce the influence of disturbances acting on the controlled object. This paper proposes an H∞ control design that considers packet loss as a disturbance. Numerical examples show that the proposed H∞ control design ...

  20. Relationship between perceived work ability and productivity loss.

    Science.gov (United States)

    Vänni, Kimmo; Virtanen, Pekka; Luukkaala, Tiina; Nygård, Clas-Håkan

    2012-01-01

    This paper presents an approach to assessing presenteeism (on-the-job productivity loss) that is related to perceived work ability. The aim of this explorative research was to find out if perceived work ability could be a robust indicator, interchangeable with presenteeism, in Finnish food industry organizations. The developed approach was based on existing presenteeism research as well as on register and survey data. The approach demonstrates that one step downward on the 10-point perceived work ability scale theoretically reduces employees' on-the-job productivity by ˜5 percentage points. At the company level, on-the-job productivity loss was 3.7% (mdn 0), while sickness absence was 5.0% (mdn 2.2). The probability of productivity loss among factory workers was fourfold compared to women in office work. The developed approach makes it possible to assess perceived productivity loss at the level of an individual and an organization. Perceived work ability may, in fact, be a robust indicator for assessing perceived productivity loss.

  1. Interaction between production control and quality control

    NARCIS (Netherlands)

    Bij, van der J.D.; Ekert, van J.H.W.

    1999-01-01

    Describes a qualitative study on interaction between systems for production control and quality control within industrial organisations. Production control and quality control interact in a sense. Good performance for one aspect often influences or frustrates the performance of the other. As far as

  2. 76 FR 22336 - Controlled Groups; Deferral of Losses

    Science.gov (United States)

    2011-04-21

    ... intercompany loss when B recognizes a corresponding gain. For example, if S sells 30 percent of T's stock to B... occurrence of either of two events. The deferred loss is taken into account to the extent of any... Controlled Groups; Deferral of Losses AGENCY: Internal Revenue Service (IRS), Treasury. ACTION: Notice of...

  3. The Global Burden of Potential Productivity Loss from Uncorrected Presbyopia.

    Science.gov (United States)

    Frick, Kevin D; Joy, Susan M; Wilson, David A; Naidoo, Kovin S; Holden, Brien A

    2015-08-01

    The onset of presbyopia in middle adulthood results in potential losses in productivity among otherwise healthy adults if uncorrected or undercorrected. The economic burden could be significant in lower-income countries, where up to 94% of cases may be uncorrected or undercorrected. This study estimates the global burden of potential productivity lost because of uncorrected functional presbyopia. Population data from the US Census Bureau were combined with the estimated presbyopia prevalence, age of onset, employment rate, gross domestic product (GDP) per capita in current US dollars, and near vision impairment disability weights from the Global Burden of Disease 2010 study to estimate the global loss of productivity from uncorrected and undercorrected presbyopia in each country in 2011. To allow comparison with earlier work, we also calculated the loss with the conservative assumption that the contribution to productivity extends only up to 50 years of age. The economic modeling did not require the use of subjects. We estimated the number of cases of uncorrected or undercorrected presbyopia in each country among the working-age population. The number of working-age cases was multiplied by the labor force participation rate, the employment rate, a disability weight, and the GDP per capita to estimate the potential loss of GDP due to presbyopia. The outcome being measured is the lost productivity in 2011 US dollars resulting from uncorrected or undercorrected presbyopia. There were an estimated 1.272 billion cases of presbyopia worldwide in 2011. A total of 244 million cases, uncorrected or undercorrected among people aged productivity loss of US $11.023 billion (0.016% of global GDP). If all those people aged productive, the potential productivity loss would be US $25.367 billion or 0.037% of global GDP. Correcting presbyopia to the level achieved in Europe would reduce the burden to US $1.390 billion (0.002% of global GDP). Even with conservative assumptions

  4. Quantifying the economic burden of productivity loss in rheumatoid arthritis.

    Science.gov (United States)

    Filipovic, Ivana; Walker, David; Forster, Fiona; Curry, Alistair S

    2011-06-01

    In light of the large number of recent studies and systematic reviews investigating the cost of RA, this article examines the methods used to assess the impact of RA on employment and work productivity, and provides an overview of the issues surrounding work productivity loss in the RA population. A review of the published literature was conducted in order to identify relevant articles. These articles were then reviewed and their methodologies compared. The various methods used to calculate economic loss were then explained and discussed. We found that although methods of lost productivity and associated costs varied between studies, all suggest that RA is associated with significant burden of illness. Economic analyses that exclude indirect costs will therefore underestimate the full economic impact of RA. However, the methods used to calculate productivity loss have a significant impact on the results of indirect cost analyses, and should be selected carefully when designing such studies. Several factors relating to the disease, the job and socio-demographics have been found to predict work disability. Consideration of these factors is vital when measuring the extent of both absenteeism and presenteeism, and will allow for more accurate estimation of the impact of RA on work productivity. This information may also guide interventions aiming to prevent or postpone work disability and job loss.

  5. 76 FR 31543 - Controlled Groups; Deferral of Losses; Hearing

    Science.gov (United States)

    2011-06-01

    ... DEPARTMENT OF THE TREASURY Internal Revenue Service 26 CFR Part 1 [REG-118761-09] RIN 1545-BI92 Controlled Groups; Deferral of Losses; Hearing AGENCY: Internal Revenue Service (IRS), Treasury. ACTION... deferred losses on the sale or exchange of property between members of a controlled group. DATES: The...

  6. 76 FR 30052 - Controlled Groups; Deferral of Losses; Correction

    Science.gov (United States)

    2011-05-24

    ... DEPARTMENT OF THE TREASURY Internal Revenue Service 26 CFR Part 1 [REG-118761-09] RIN 1545-BI92 Controlled Groups; Deferral of Losses; Correction AGENCY: Internal Revenue Service (IRS), Treasury. ACTION... deferred losses on the sale or exchange of property between members of a controlled group. FOR FURTHER...

  7. Coherent active polarization control without loss

    Science.gov (United States)

    Ye, Yuqian; Hay, Darrick; Shi, Zhimin

    2017-11-01

    We propose a lossless active polarization control mechanism utilizing an anisotropic dielectric medium with two coherent inputs. Using scattering matrix analysis, we derive analytically the required optical properties of the anisotropic medium that can behave as a switchable polarizing beam splitter. We also show that such a designed anisotropic medium can produce linearly polarized light at any azimuthal direction through coherent control of two inputs with a specific polarization state. Furthermore, we present a straightforward design-on-demand procedure of a subwavelength-thick metastructure that can possess the desired optical anisotropy at a flexible working wavelength. Our lossless coherent polarization control technique may lead to fast, broadband and integrated polarization control elements for applications in imaging, spectroscopy, and telecommunication.

  8. Coherent active polarization control without loss

    Directory of Open Access Journals (Sweden)

    Yuqian Ye

    2017-11-01

    Full Text Available We propose a lossless active polarization control mechanism utilizing an anisotropic dielectric medium with two coherent inputs. Using scattering matrix analysis, we derive analytically the required optical properties of the anisotropic medium that can behave as a switchable polarizing beam splitter. We also show that such a designed anisotropic medium can produce linearly polarized light at any azimuthal direction through coherent control of two inputs with a specific polarization state. Furthermore, we present a straightforward design-on-demand procedure of a subwavelength-thick metastructure that can possess the desired optical anisotropy at a flexible working wavelength. Our lossless coherent polarization control technique may lead to fast, broadband and integrated polarization control elements for applications in imaging, spectroscopy, and telecommunication.

  9. An Evidence-Based Review of Fat Modifying Supplemental Weight Loss Products

    Directory of Open Access Journals (Sweden)

    Amy M. Egras

    2011-01-01

    Full Text Available Objective. To review the literature on fat modifying dietary supplements commonly used for weight loss. Methods. Recently published randomized, placebo-controlled trials were identified in PubMed, MEDLINE, International Pharmaceutical Abstracts, Cochrane Database, and Google Scholar using the search terms dietary supplement, herbal, weight loss, obesity, and individual supplement names. Discussion. Data for conjugated linoleic acid (CLA, Garcinia cambogia, chitosan, pyruvate, Irvingia gabonensis, and chia seed for weight loss were identified. CLA, chitosan, pyruvate, and Irvingia gabonensis appeared to be effective in weight loss via fat modifying mechanisms. However, the data on the use of these products is limited. Conclusion. Many obese people use dietary supplements for weight loss. To date, there is little clinical evidence to support their use. More data is necessary to determine the efficacy and safety of these supplements. Healthcare providers should assist patients in weighing the risks and benefits of dietary supplement use for weight loss.

  10. Work Productivity Loss After Mild Traumatic Brain Injury.

    Science.gov (United States)

    Silverberg, Noah D; Panenka, William J; Iverson, Grant L

    2018-02-01

    To examine the completeness of return to work (RTW) and the degree of productivity loss in individuals who do achieve a complete RTW after mild traumatic brain injury (MTBI). Multisite prospective cohort. Outpatient concussion clinics. Patients (N=79; mean age, 41.5y; 55.7% women) who sustained an MTBI and were employed at the time of the injury. Participants were enrolled at their first clinic visit and assessed by telephone 6 to 8 months postinjury. Not applicable. Structured interview of RTW status, British Columbia Postconcussion Symptom Inventory (BC-PSI), Lam Employment Absence and Productivity Scale (LEAPS), Mini International Neuropsychiatric Interview, and brief pain questionnaire. Participants who endorsed symptoms from ≥3 categories with at least moderate severity on the BC-PSI were considered to meet International Classification of Diseases, 10th Revision criteria for postconcussional syndrome. RTW status was classified as complete if participants returned to their preinjury job with the same hours and responsibilities or to a new job that was at least as demanding. Of the 46 patients (58.2%) who achieved an RTW, 33 (71.7%) had a complete RTW. Participants with complete RTW had high rates of postconcussional syndrome (44.5%) and comorbid depression (18.2%), anxiety disorder (24.2%), and bodily pain (30.3%). They also reported productivity loss on the LEAPS, such as "getting less work done" (60.6%) and "making more mistakes" (42.4%). In a regression model, productivity loss was predicted by the presence of postconcussional syndrome and a comorbid psychiatric condition, but not bodily pain. Even in patients who RTW after MTBI, detailed assessment revealed underemployment and productivity loss associated with residual symptoms and psychiatric complications. Copyright © 2017 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.

  11. What drives productivity loss in chronic rhinosinusitis? A SNOT-22 subdomain analysis.

    Science.gov (United States)

    Chowdhury, Naweed I; Mace, Jess C; Smith, Timothy L; Rudmik, Luke

    2018-01-01

    Previous studies have shown declines in productivity due to chronic rhinosinusitis (CRS) are correlated with disease-specific quality-of-life (QOL) measures. However, it is unclear which symptom domains contribute primarily to productivity loss. This investigation sought to assess the association between CRS-specific QOL subdomain impairment and productivity loss. Prospective, multi-institutional, observational cohort study. There were 198 patients with refractory CRS enrolled between August 2012 and June 2015. Baseline QOL measures were obtained across five subdomains of the 22-item SinoNasal Outcome Test (SNOT-22). Lost productivity time was determined from patient-reported measures of annual absenteeism, presenteeism, and lost leisure time, and then monetized using annual daily wage rates from the 2012 US National Census and 2013 Department of Labor statistics. Productivity losses correlated with impairments in both SNOT-22 psychological dysfunction (Spearman correlation coefficient [Rs] = 0.428, P productivity losses (Rs = 0.366, P productivity cost was $11,820/patient, whereas patients with comorbid immunodeficiency ($23,285/patient), tobacco use ($23,195/patient), and steroid dependency ($18,910/patient) reported higher than average annual productivity costs. Multivariate linear regression found maximum annual productivity costs in adjusted psychological ($13,300/patient, P productivity losses. Patients with comorbid immunodeficiency, smoking, and steroid dependency had higher than average productivity losses. Targeted management of psychological and sleep dysfunction in combination with standard symptom control may improve patient-centered care and reduce the annual economic burden of CRS. 2c. Laryngoscope, 128:23-30, 2018. © 2017 The American Laryngological, Rhinological and Otological Society, Inc.

  12. Loss Minimization Sliding Mode Control of IPM Synchronous Motor Drives

    Directory of Open Access Journals (Sweden)

    Mehran Zamanifar

    2010-01-01

    Full Text Available In this paper, a nonlinear loss minimization control strategy for an interior permanent magnet synchronous motor (IPMSM based on a newly developed sliding mode approach is presented. This control method sets force the speed control of the IPMSM drives and simultaneously ensures the minimization of the losses besides the uncertainties exist in the system such as parameter variations which have undesirable effects on the controller performance except at near nominal conditions. Simulation results are presented to show the effectiveness of the proposed controller.

  13. Forecasting Production Losses at a Swedish Wind Farm

    DEFF Research Database (Denmark)

    compared this statistical model with a simpler method that does not rely on a physical icing model. In that method meteorological icing is identified as periods when WRF forecasts clouds and the temperature is below freezing. During these periods it is assumed that there is no production from the turbines...... shown to predict periods of icing at a wind farm in northern Sweden (Davis et al, 2012) with improved skill compared to persistence and threshold models. Based on these results, we have developed a statistical model to estimate the loss of production at the wind park due to these icing periods. We......, however as soon as the cloud goes away in the model we assume production returns to the idealized power curve. One unique aspect of the wind park we are working with is that it is not required to shut down when icing occurs. Therefore, during icing periods production still occurs, but below the idealized...

  14. Illness related wage and productivity losses: Valuing 'presenteeism'.

    Science.gov (United States)

    Zhang, Wei; Sun, Huiying; Woodcock, Simon; Anis, Aslam

    2015-12-01

    One source of productivity loss due to illness is the reduced "quantity" or "quality" of labor input while working, often referred to as presenteeism. Illness-related presenteeism has been found to be potentially more costly than absenteeism. To value presenteeism, existing methods use wages as a proxy for marginal productivity at the firm level. However, wage may not equal marginal productivity in some scenarios. One instance is when a job involves team production and perfect substitutes for workers are not readily available. Using a Canadian linked employer-employee survey (2001-2005), we test whether relative wage equals relative marginal productivity among team workers and non-team workers with different frequencies of presenteeism (reduction at work due to illness). For the pooled cross-sectional estimates (2001, 2003, 2005) we obtain 13,755 observations with 6842 unique workplaces. There are 6490 observations for the first differences estimates from the odd years and 5263 observations for the first differences estimates from 2001 to 2002 and 2003 to 2004. We find that in both small and large firms, team workers with frequent reductions at work are less productive but earn similarly compared with non-team workers without reductions. We also find that in small firms, workers with occasional work reductions are more productive than workers without reductions, but the reverse is true in large firms. The study findings partially support the literature stating that productivity loss resulting from employee presenteeism could exceed wages if team work is involved. Copyright © 2015 Elsevier Ltd. All rights reserved.

  15. [A systematic review of the effectiveness of alternative weight-loss products' ingredients].

    Science.gov (United States)

    de Lira-García, Cynthia; Souto-Gallardo, María; Bacardí-Gascón, Monserrat; Jiménez-Cruz, Arturo

    2008-01-01

    The high demand for obesity treatment and conventional therapies' lack of effectiveness increases the use of alternative products. This study was aimed at assessing evidence from randomised clinical trials regarding the effectiveness of alternative weight-loss products' ingredients. A survey was conducted in Ensenada, Baja California, to assess the frequency of consuming alternative products used for weight reduction. The ingredients in the products most in demand were included in this review. The Pubmed database was searched for all randomised clinical trial papers including these ingredients and assessing weight loss. Thirty-six percent of the subjects questioned had used alternative methods for weight-loss, 83% of them being women. The most frequently used products were shakes, tea, pills and flaxseed/linseed. Sixteen randomised clinical trials using four ingredients were used: Garcinia cambogia, green tea, L-carnitina and flaxseed. Only two studies (green tea and Garcinia cambogia) showed significant weight-loss (25%) amongst control and experimental groups. There was no significant difference between the groups in the studies regarding L-carnitina and flaxseed. There is a lack of evidence regarding quality studies justifying the use of alternative products for weight loss.

  16. Heat stress causes substantial labour productivity loss in Australia

    Science.gov (United States)

    Zander, Kerstin K.; Botzen, Wouter J. W.; Oppermann, Elspeth; Kjellstrom, Tord; Garnett, Stephen T.

    2015-07-01

    Heat stress at the workplace is an occupational health hazard that reduces labour productivity. Assessment of productivity loss resulting from climate change has so far been based on physiological models of heat exposure. These models suggest productivity may decrease by 11-27% by 2080 in hot regions such as Asia and the Caribbean, and globally by up to 20% in hot months by 2050. Using an approach derived from health economics, we describe self-reported estimates of work absenteeism and reductions in work performance caused by heat in Australia during 2013/2014. We found that the annual costs were US$655 per person across a representative sample of 1,726 employed Australians. This represents an annual economic burden of around US$6.2 billion (95% CI: 5.2-7.3 billion) for the Australian workforce. This amounts to 0.33 to 0.47% of Australia’s GDP. Although this was a period when many Australians experienced what is at present considered exceptional heat, our results suggest that adaptation measures to reduce heat effects should be adopted widely if severe economic impacts from labour productivity loss are to be avoided if heat waves become as frequent as predicted.

  17. Indirect costs and workplace productivity loss associated with non-Hodgkin lymphoma.

    Science.gov (United States)

    Yu, Justin S; Hansen, Ryan N; Valderrama, Adriana; Carlson, Josh J

    2016-11-01

    The objective of this study was to examine indirect costs and workplace productivity loss (defined as an aggregate measure of absenteeism, short-term disability, and long-term disability days) associated with non-Hodgkin lymphoma (NHL) from a societal perspective in a commercially insured working-age United States population. The MarketScan(®) Commercial Claims and Encounters and Health and Productivity Management Databases (2007-2013) were used in this study, with controls matched 3:1 to NHL patients. In comparison to controls, NHL patients incurred significantly more workplace productivity loss (31.99 days; 95% CI: 25.24 days, 38.73 days; p workplace productivity and higher associated indirect costs.

  18. Dry eye disease and work productivity loss in visual display users: the Osaka study.

    Science.gov (United States)

    Uchino, Miki; Uchino, Yuichi; Dogru, Murat; Kawashima, Motoko; Yokoi, Norihiko; Komuro, Aoi; Sonomura, Yukiko; Kato, Hiroaki; Kinoshita, Shigeru; Schaumberg, Debra A; Tsubota, Kazuo

    2014-02-01

    To estimate the impact of dry eye disease (DED) on work performance and productivity in office workers using visual display terminals (VDTs). Cross-sectional study. Six hundred seventy-two Japanese young and middle-aged office workers using VDTs completed a questionnaire that was designed to measured at-work performance deficits and productivity losses using the Japanese version of the Work Limitations Questionnaire, completed by e-mail. Using the Japanese dry eye diagnostic criteria, respondents were classified into 3 groups: definite DED, probable DED, and non DED. Of the 672 office workers, 553 subjects (82.3%), including 366 men and 187 women, completed the questionnaire and underwent clinical evaluation. As for the total workplace productivity loss, the non DED group demonstrated a loss of 3.56%, those with probable DED demonstrated a loss of 4.06%, and those with definite DED demonstrated a loss of 4.82%, indicating significantly worse performance and productivity (P = .014, trend test). For the 4 subscales, DED was associated with significantly lower on-the-job time management (P = .009, trend test) and combined mental performance and interpersonal functioning (P = .011, trend test). After controlling for age, sex, VDT working hours, and diagnosis of DED, time management, physical demands, and mental and interpersonal functioning showed a significant relationship to DED (each P > .05). Annual DED productivity losses were estimated to be $6160 per employee when measured by total production and $1178 per employee calculated by wage. This study indicated that there is a significant impact of DED on the total productivity of Japanese VDT users. Copyright © 2014 Elsevier Inc. All rights reserved.

  19. Production and energy loss of strange and heavy quarks

    International Nuclear Information System (INIS)

    2010-01-01

    Data taken over the last several years have demonstrated that RHIC has created a hot, dense medium with partonic degrees of freedom. Identified particle spectra at high transverse momentum (p T ) and heavy flavor that are thought to be well-calibrated probes thus serve as ideal tools to study the properties of the medium. We present p T distributions of particle ratios in p+p collisions from the STAR experiment to understand the particle production mechanisms. These measurements will also constrain fragmentation functions in hadron-hardon collisions. In heavy-ion collisions, we highlight (1) recent measurements of strange hadrons and heavy flavor decay electrons up to high p T to study jet interaction with the medium and explore partonic energy loss mechanisms, and (2) Υ and high p T J/ψ measurements to study the effect of color screening and other possible production mechanisms.

  20. PRODUCTION AND RECOIL LOSS OF COSMOGENIC NUCLIDES IN PRESOLAR GRAINS

    International Nuclear Information System (INIS)

    Trappitsch, Reto; Leya, Ingo

    2016-01-01

    Presolar grains are small particles that condensed in the vicinity of dying stars. Some of these grains survived the voyage through the interstellar medium (ISM) and were incorporated into meteorite parent bodies at the formation of the Solar System. An important question is when these stellar processes happened, i.e., how long presolar grains were drifting through the ISM. While conventional radiometric dating of such small grains is very difficult, presolar grains are irradiated with galactic cosmic rays (GCRs) in the ISM, which induce the production of cosmogenic nuclides. This opens the possibility to determine cosmic-ray exposure (CRE) ages, i.e., how long presolar grains were irradiated in the ISM. Here, we present a new model for the production and loss of cosmogenic 3 He, 6,7 Li, and 21,22 Ne in presolar SiC grains. The cosmogenic production rates are calculated using a state-of-the-art nuclear cross-section database and a GCR spectrum in the ISM consistent with recent Voyager data. Our findings are that previously measured 3 He and 21 Ne CRE ages agree within the (sometimes large) 2 σ uncertainties and that the CRE ages for most presolar grains are smaller than the predicted survival times. The obtained results are relatively robust since interferences from implanted low-energy GCRs into the presolar SiC grains and/or from cosmogenic production within the meteoroid can be neglected.

  1. Development, Production and Testing of 4500 Beam Loss Monitors

    CERN Document Server

    Holzer, E B; Dehning, B; Ferioli, G; Grishin, V; Jimenez, T M; Koshelev, A; Kramer, Daniel; Larionov, A; Taborelli, M; Seleznev, V; Sleptsov, M; Sytin, A; Wevers, I

    2008-01-01

    Beam-loss monitoring (BLM) [1] is a key element in the LHC machine protection. 4250 nitrogen filled ionization chambers (IC) and 350 secondary emission monitors (SEM) have been manufactured and tested at the Institute for High Energy Physics (IHEP) in Protvino, Russia, following their development at CERN. Signal speed and robustness against aging were the main design criteria. Each monitor is permanently sealed inside a stainless-steel cylinder. The quality of the welding was a critical aspect during production. The SEMs are requested to hold a vacuum of $10^{-7}$ bar. Impurity levels from thermal and radiationinduced desorption should remain in the range of parts per million in the ICs. To avoid radiation aging (up to $2·10^{8}$ Gy in 20 years) production of the chambers followed strict UHV requirements. IHEP designed and built the UHV production stand. Due to the required dynamic range of $10^{8}$, the leakage current of the monitors has to stay below 2 pA. Several tests during and after production were ...

  2. Hotspots for Nitrogen and Phosphorus Losses from Food Production in China: A County-Scale Analysis.

    Science.gov (United States)

    Wang, Mengru; Ma, Lin; Strokal, Maryna; Ma, Wenqi; Liu, Xuejun; Kroeze, Carolien

    2018-04-27

    Food production in China results in large losses of nitrogen (N) and phosphorus (P) to the environment. Our objective is to identify hotspots for N and P losses to the environment from food production in China at the county scale. To do this, we used the NUFER (Nutrient flows in Food chains, Environment and Resources use) model. Between 1990 and 2012, the hotspot area expanded by a factor of 3 for N, and 24 for P. In 2012 most hotspots were found in the North China Plain. Hotspots covered less than 10% of the Chinese land area, but contributed by more than half to N and P losses to the environment. Direct discharge of animal manure to rivers was an important cause of N and P losses. Food production was found to be more intensive in hotspots than in other counties. Synthetic fertilizer use and animal numbers in hotspots were a factor of 4-5 higher than in other counties in 2012. Also the number of people working in food production and the incomes of farmers are higher in hotspots than in other counties. This study concludes with suggestions for region-specific pollution control technologies for food production in China.

  3. Hotspots for Nitrogen and Phosphorus Losses from Food Production in China: A County-Scale Analysis

    Science.gov (United States)

    2018-01-01

    Food production in China results in large losses of nitrogen (N) and phosphorus (P) to the environment. Our objective is to identify hotspots for N and P losses to the environment from food production in China at the county scale. To do this, we used the NUFER (Nutrient flows in Food chains, Environment and Resources use) model. Between 1990 and 2012, the hotspot area expanded by a factor of 3 for N, and 24 for P. In 2012 most hotspots were found in the North China Plain. Hotspots covered less than 10% of the Chinese land area, but contributed by more than half to N and P losses to the environment. Direct discharge of animal manure to rivers was an important cause of N and P losses. Food production was found to be more intensive in hotspots than in other counties. Synthetic fertilizer use and animal numbers in hotspots were a factor of 4–5 higher than in other counties in 2012. Also the number of people working in food production and the incomes of farmers are higher in hotspots than in other counties. This study concludes with suggestions for region-specific pollution control technologies for food production in China. PMID:29671326

  4. Decreased postural control in people with moderate hearing loss

    Science.gov (United States)

    Thomas, Ewan; Martines, Francesco; Bianco, Antonino; Messina, Giuseppe; Giustino, Valerio; Zangla, Daniele; Iovane, Angelo; Palma, Antonio

    2018-01-01

    Abstract Balance is a complex process that involves multiple sensory integrations. The auditory, visual, and vestibular systems are the main contributors. Hearing loss or hearing impairment may induce inappropriate postural strategies that could affect balance and therefore increase the risk of falling. The aim of this study was to understand whether hearing loss could influence balance, cervical posture, and muscle activation in the cervical region. Thirteen patients (61 ± 13 years; 161.8 ± 11.0 cm; 70.5 ± 15.9 kg) with moderate hearing loss (Right ear −60 ± 21 dB; Left ear −61 ± 24 dB) underwent: an audiometric examination, a postural examination (with open and closed eyes) through a stabilometric platform, a cervical ROM examination through a head accelerometer, and a sternocleidomastoid electromyography (EMG) examination. A linear regression analysis has shown a regression coefficient (R2) 0.76 and 0.69 between hearing loss and the posturographic parameters, on the sagittal sway, with open and closed eyes, respectively. The combination of frontal and sagittal sway is able to explain up to 84% of the variance of the audiometric assessment. No differences were found between right and left hemibody between the audiometric, posturographic, cervical ROM parameters, and in EMG amplitude. ROM and EMG parameters have not shown any significant associations with hearing loss, for both right and left head rotation. Hearing loss is associated to increased posturographic measures, especially the sagittal sway, underlining a reduced postural control in people with hearing impairments. No association was found between the heads posture and neck activation with hearing loss. Hearing loss may be associated with an increased risk of falls. PMID:29620637

  5. Decreased postural control in people with moderate hearing loss.

    Science.gov (United States)

    Thomas, Ewan; Martines, Francesco; Bianco, Antonino; Messina, Giuseppe; Giustino, Valerio; Zangla, Daniele; Iovane, Angelo; Palma, Antonio

    2018-04-01

    Balance is a complex process that involves multiple sensory integrations. The auditory, visual, and vestibular systems are the main contributors. Hearing loss or hearing impairment may induce inappropriate postural strategies that could affect balance and therefore increase the risk of falling.The aim of this study was to understand whether hearing loss could influence balance, cervical posture, and muscle activation in the cervical region.Thirteen patients (61 ± 13 years; 161.8 ± 11.0 cm; 70.5 ± 15.9 kg) with moderate hearing loss (Right ear -60 ± 21 dB; Left ear -61 ± 24 dB) underwent: an audiometric examination, a postural examination (with open and closed eyes) through a stabilometric platform, a cervical ROM examination through a head accelerometer, and a sternocleidomastoid electromyography (EMG) examination.A linear regression analysis has shown a regression coefficient (R) 0.76 and 0.69 between hearing loss and the posturographic parameters, on the sagittal sway, with open and closed eyes, respectively. The combination of frontal and sagittal sway is able to explain up to 84% of the variance of the audiometric assessment. No differences were found between right and left hemibody between the audiometric, posturographic, cervical ROM parameters, and in EMG amplitude. ROM and EMG parameters have not shown any significant associations with hearing loss, for both right and left head rotation.Hearing loss is associated to increased posturographic measures, especially the sagittal sway, underlining a reduced postural control in people with hearing impairments. No association was found between the heads posture and neck activation with hearing loss. Hearing loss may be associated with an increased risk of falls.

  6. Crisis, suicide and labour productivity losses in Spain.

    Science.gov (United States)

    Rivera, Berta; Casal, Bruno; Currais, Luis

    2017-01-01

    Suicide became the first cause of death between the ages of 15 and 44 in Spain in the year 2013. Moreover, the suicide rate in Spain went up by more than 9 % with respect to the previous year. This increase could be related to the serious economic recession that Spain has been experiencing in recent years. In this sense, there is a lack of evidence to help assess to what extent these suicides have a social cost in terms of losses in human capital. Firstly, this article examines the relationship between the variables related to the economic cycle and the suicide rates in the 17 Spanish regions. Secondly, an estimate is made of the losses in labour productivity owing to these suicides. In this article, panel data models are used to consider different variables related to the economic cycle. Demographic variables and the suicide rates for regions across Spain from 2002 to 2013 also come into play. The present and future production costs owing to premature death from suicide are calculated using a human capital model. These costs are valued from the gross salary that an individual no longer receives in the future at the very moment he or she leaves the labour market. The results provide a strong indication that a decrease in economic growth and an increase in unemployment negatively affect suicide rates. Due to suicide, 38,038 potential years of working life were lost in 2013. This has an estimated cost of over 565 million euros. The economic crisis endured by Spain in recent years has played a role in the higher suicide rates one can observe from the data in official statistics. From a social perspective, suicide is a public health problem with far-reaching consequences.

  7. Measuring production loss due to health and work environment problems: construct validity and implications.

    Science.gov (United States)

    Karlsson, Malin Lohela; Bergström, Gunnar; Björklund, Christina; Hagberg, Jan; Jensen, Irene

    2013-12-01

    The aim was to validate two measures of production loss, health-related and work environment-related production loss, concerning their associations with health status and work environment factors. Validity was assessed by evaluating the construct validity. Health problems related and work environment-related problems (or factors) were included in separate analyses and evaluated regarding the significant difference in proportion of explained variation (R) of production loss. health problems production loss was not found to fulfill the criteria for convergent validity in this study; however, the measure of work environment-related production loss did fulfill the criteria that were set up. The measure of work environment-related production loss can be used to screen for production loss due to work environment problems as well as an outcome measure when evaluating the effect of organizational interventions.

  8. Rotor Field Oriented Control with adaptive Iron Loss Compensation

    DEFF Research Database (Denmark)

    Rasmussen, Henrik; Vadstrup, P.; Børsting, H.

    1999-01-01

    It is well known from the literature that iron loses in an induction motor implies field angle estimation errors and hence detuning problems. In this paper a new method for estimating the iron loss resistor in an induction motor is presented. The method is based on a traditional dynamic model...... controlled in a Field Oriented Control scheme. This deviation is used to force a MIT-rule based adaptive estimator. An adaptive compensator containing the developed estimator is introduced and verified by simulations and tested by real time experiments....

  9. Weed flora, yield losses and weed control in cotton crop

    OpenAIRE

    Jabran, Khawar

    2016-01-01

    Cotton (Gossypium spp.) is the most important fiber crop of world and provides fiber, oil, and animals meals. Weeds interfere with the growth activities of cotton plants and compete with it for resources. All kinds of weeds (grasses, sedges, and broadleaves) have been noted to infest cotton crop. Weeds can cause more than 30% decrease in cotton productivity. Several methods are available for weed control in cotton. Cultural control carries significance for weed control up to a certain extent....

  10. Are neutral loss and internal product ions useful for top-down protein identification?

    Science.gov (United States)

    Xiao, Kaijie; Yu, Fan; Fang, Houqin; Xue, Bingbing; Liu, Yan; Li, Yunhui; Tian, Zhixin

    2017-05-08

    Neutral loss and internal product ions have been found to be significant in both peptide and protein tandem mass spectra and they have been proposed to be included in database search and for protein identification. In addition to common canonical b/y ions in collision-based dissociation or c/z ions in electron-based dissociation, inclusion of neutral loss and internal product ions would certainly make better use of tandem mass spectra data; however, their ultimate utility for protein identification with false discovery rate control remains unclear. Here we report our proteome-level utility benchmarking of neutral loss and internal product ions with tandem mass spectra of intact E. coli proteome. Utility of internal product ions was further evaluated at the protein level using selected tandem mass spectra of individual E. coli proteins. We found that both neutral loss and internal products ions do not have direct utility for protein identification when they were used for scoring of P Score; but they do have indirect utility for provision of more canonical b/y ions when they are included in the database search and overlapping ions between different ion types are resolved. Tandem mass spectrometry has evolved to be a state-of-the-art method for characterization of protein primary structures (including amino acid sequence, post-translational modifications (PTMs) as well as their site location), where full study and utilization tandem mass spectra and product ions are indispensable. This primary structure information is essential for higher order structure and eventual function study of proteins. Copyright © 2017 Elsevier B.V. All rights reserved.

  11. Productivity loss due to absenteeism and presenteeism by different instruments in patients with RA and subjects without RA

    NARCIS (Netherlands)

    Braakman-Jansen, Louise Marie Antoinette; Kuper, Ina H.; van de Laar, Mart A F J; Taal, Erik

    2012-01-01

    Objectives. To explore the impact of at-work productivity loss on the total productivity cost by different instruments in patients recently diagnosed with RA and controls without RA. Methods. Cross-sectional data were collected from outpatients with RA between December 2007 and February 2008. The

  12. Productivity losses associated with tuberculosis deaths in the World Health Organization African region.

    Science.gov (United States)

    Kirigia, Joses Muthuri; Muthuri, Rosenabi Deborah Karimi

    2016-06-01

    In 2014, almost half of the global tuberculosis deaths occurred in the World Health Organization (WHO) African Region. Approximately 21.5 % of the 6 060 742 TB cases (new and relapse) reported to the WHO in 2014 were in the African Region. The specific objective of this study was to estimate future gross domestic product (GDP) losses associated with TB deaths in the African Region for use in advocating for better strategies to prevent and control tuberculosis. The cost-of-illness method was used to estimate non-health GDP losses associated with TB deaths. Future non-health GDP losses were discounted at 3 %. The analysis was conducted for three income groups of countries. One-way sensitivity analysis at 5 and 10 % discount rates was undertaken to assess the impact on the expected non-health GDP loss. The 0.753 million tuberculosis deaths that occurred in the African Region in 2014 would be expected to decrease the future non-health GDP by International Dollars (Int$) 50.4 billion. Nearly 40.8, 46.7 and 12.5 % of that loss would come from high and upper-middle- countries or lower-middle- and low-income countries, respectively. The average total non-health GDP loss would be Int$66 872 per tuberculosis death. The average non-health GDP loss per TB death was Int$167 592 for Group 1, Int$69 808 for Group 2 and Int$21 513 for Group 3. Tuberculosis exerts a sizeable economic burden on the economies of the WHO AFR countries. This implies the need to strongly advocate for better strategies to prevent and control tuberculosis and to help countries end the epidemic of tuberculosis by 2030, as envisioned in the United Nations General Assembly resolution on Sustainable Development Goals (SDGs).

  13. Assessment of productivity loss in air-conditioned buildings using PMV index

    Energy Technology Data Exchange (ETDEWEB)

    Kosonen, R. [Halton OY, Kausala (Finland); Tan, F. [CapitaLand Commercial Limited, Singapore (Singapore)

    2004-07-01

    This theoretical study reports on the assessment of productivity loss in air-conditioned office buildings using the PMV approach and makes use of Wyon's reviews [D.P. Wyon, P.O. Fanger, B.W. Olesen, C.J.K. Pedersen, The mental performance of subjects clothed for comfort at two different air temperatures, Ergonomics 18 (1975) 358-374; D.P. Wyon, Individual microclimate control: required range, probable benefits and current feasibility, in: Proceedings of Indoor Air '96, Institute of Public Health, Tokyo, 1996; D.P. Wyon, Indoor environmental effects on productivity. IAQ 96 Paths to better building environments/Keynote address. Y. Kevin. Atlanta, ASHRAE, pp. 5-15] as the basis to compare and to relate how the productivity loss could be minimised through improved thermal comfort design criteria. The finding shows that task-related performance is significantly correlated with the human perception of thermal environment that in turn is dependent on temperatures. Different combinations of thermal criteria (air velocity, clo, metabolic, etc.) can lead to similar PMV value and the PMV equation is useful to predict productivity loss that is due to the rate of change in thermal conditions. The study also highlights the issues that remain to be resolved in future research. (author)

  14. Development and Validation of the Eating Loss of Control Scale

    Science.gov (United States)

    Blomquist, Kerstin K.; Roberto, Christina A.; Barnes, Rachel D.; White, Marney A.; Masheb, Robin M.; Grilo, Carlos M.

    2014-01-01

    Recurrent objective bulimic episodes (OBE) are a defining diagnostic characteristic of binge eating disorder (BED) and bulimia nervosa (BN). OBEs are characterized by experiencing loss of control (LOC) while eating an unusually large quantity of food. Despite nosological importance and complex heterogeneity across patients, measurement of LOC has been assessed dichotomously (present/absent). This study describes the development and initial validation of the Eating Loss of Control Scale (ELOCS), a self-report questionnaire that examines the complexity of the LOC construct. Participants were 168 obese treatment-seeking individuals with BED who completed the Eating Disorder Examination interview and self-report measures. Participants rated their LOC-related feelings or behaviors on continuous Likert-type scales and reported the number of LOC episodes in the past 28 days. Principal component analysis identified a single-factor, 18-item scale, which demonstrated good internal reliability (α=0.90). Frequency of LOC episodes was significantly correlated with frequency of OBEs and subjective bulimic episodes. The ELOCS demonstrated good convergent validity and was significantly correlated with greater eating pathology, greater emotion dysregulation, greater depression, and lower self-control, but not with BMI. The findings suggest that the ELOCS is a valid self-report questionnaire that may provide important clinical information regarding experiences of LOC in obese persons with BED. Future research should examine the ELOCS in other eating disorders and non-clinical samples. PMID:24219700

  15. Narcolepsy-cataplexy and loss of sphincter control.

    Science.gov (United States)

    Vgontzas, A. N.; Sollenberger, S. E.; Kales, A.; Bixler, E. O.; Vela-Bueno, A.

    1996-01-01

    We describe the case of a 34-year-old man who presented intermittent faecal incontinence as a manifestation of cataplexy. The patient's sleep history was positive for the full narcoleptic tetrad (sleep attacks, cataplexy, sleep paralysis and hypnagogic hallucinations) while extensive neuropsychiatric work up was negative for any neurologic or psychiatric illness. Repeat polysomnograms (including a polysomnogram with a full seizure montage) were positive for pathologic sleepiness, but there was no evidence of a seizure disorder. The course of the patient's symptomatology and the favourable response of his symptoms to stimulants and imipramine support the theory that his intermittent loss of sphincter control is part of his narcolepsy-cataplexy. PMID:8796217

  16. Control rod drive mechanism stator loss of coolant test

    International Nuclear Information System (INIS)

    Besel, L.; Ibatuan, R.

    1977-04-01

    This report documents the stator loss of coolant test conducted at HEDL on the lead unit Control Rod Drive Mechanism (CRDM) in February, 1977. The purpose of the test was to demonstrate scram capability of the CRDM with an uncooled stator and to obtain a time versus temperature curve of an uncooled stator under power. Brief descriptions of the test, hardware used, and results obtained are presented in the report. The test demonstrated that the CRDM could be successfully scrammed with no anomalies in both the two-phase and three-phase stator winding hold conditions after the respective equilibrium stator temperatures had been obtained with no stator coolant

  17. Early pest development and loss of biological control are associated with urban warming.

    Science.gov (United States)

    Meineke, Emily K; Dunn, Robert R; Frank, Steven D

    2014-11-01

    Climate warming is predicted to cause many changes in ectotherm communities, one of which is phenological mismatch, wherein one species' development advances relative to an associated species or community. Phenological mismatches already lead to loss of pollination services, and we predict that they also cause loss of biological control. Here, we provide evidence that a pest develops earlier due to urban warming but that phenology of its parasitoid community does not similarly advance. This mismatch is associated with greater egg production that likely leads to more pests on trees. © 2014 The Author(s) Published by the Royal Society. All rights reserved.

  18. The Effect of Weight Loss on Health, Productivity and Medical Expenditures among Overweight Employees

    Science.gov (United States)

    Bilger, Marcel; Finkelstein, Eric A.; Kruger, Eliza; Tate, Deborah F.; Linnan, Laura A.

    2013-01-01

    Objective To test whether overweight or obese employees who achieve clinically significant weight loss of 5% or greater have reduced medical expenditures, absenteeism, presenteeism, and/or improved Health-Related Quality Of Life (HRQOL). Methods The sample analyzed combines data from full-time overweight or obese employees who took part in one of the WAY to Health weight loss studies: one that took place in 17 community colleges (935 employees) and another in 12 universities (933), all in North Carolina. The estimations are performed using non-linear difference-in-difference models where groups are identified by whether the employee achieved a 5% or greater weight loss (treated) or not (control) and the treatment variable indicates pre- and post-weight loss intervention. The outcomes analyzed are the average quarterly (90 days) amount of medical claims paid by the health insurer, number of days missed at work during the past month, Stanford Presenteeism Scale SPS-6 and the EQ-5D-3L measure of HRQOL. Results We find statistical evidence supporting that 5% or greater weight loss prevents deterioration in EQ-5D-3L scores by 0.026 points (p-value: 0.03) and reduces both absenteeism by 0.258 days per month (p-value: 0.093) and the likelihood of showing low presenteeism (Stanford SPS-6 score between 7 and 9) by 2.9 percentage points (p-value: 0.083). No reduction in medical expenditures was observed. Conclusions Clinically significant weight loss among overweight or obese employees prevents short term deterioration in HRQOL and there is some evidence that employee productivity is increased. We find no evidence of a quick return on investment from reduced medical expenditures, although this may occur over longer periods. PMID:23632594

  19. Vowel production of Mandarin-speaking hearing aid users with different types of hearing loss.

    Directory of Open Access Journals (Sweden)

    Yu-Chen Hung

    Full Text Available In contrast with previous research focusing on cochlear implants, this study examined the speech performance of hearing aid users with conductive (n = 11, mixed (n = 10, and sensorineural hearing loss (n = 7 and compared it with the speech of hearing control. Speech intelligibility was evaluated by computing the vowel space area defined by the Mandarin Chinese corner vowels /a, u, i/. The acoustic differences between the vowels were assessed using the Euclidean distance. The results revealed that both the conductive and mixed hearing loss groups exhibited a reduced vowel working space, but no significant difference was found between the sensorineural hearing loss and normal hearing groups. An analysis using the Euclidean distance further showed that the compression of vowel space area in conductive hearing loss can be attributed to the substantial lowering of the second formant of /i/. The differences in vowel production between groups are discussed in terms of the occlusion effect and the signal transmission media of various hearing devices.

  20. Y-12 product improvements expected to reduce metal production costs and decrease fabrication losses

    International Nuclear Information System (INIS)

    Hassler, Morris E.

    2005-01-01

    The Y-12 National Security Complex (Y-12) supplies uranium metal and uranium oxide feed material for fabrication into fuel for research reactors around the world. Over the past few years, Y-12 has continued to improve its Low Enriched Uranium (LEU) product. The LEU is produced by taking U.S. surplus Highly Enriched Uranium (HEU) and blending it with depleted or natural uranium. The surplus HEU comes from dismantled U.S. weapons parts. Those research reactors that use LEU from Y-12 are making important contributions to international nuclear nonproliferation by using LEU rather than HEU, and helping to disposition former U.S. weapons material. It is clearly understood that the research reactor community must keep fuel costs as low as possible and Y-12 is making every effort to improve efficiencies in producing the uranium through standardizing the chemical specifications as well as the product mass and dimensional qualities. These production cost reductions allows for the U.S. to keep the LEU product price low even with the dramatic increase in the uranium enrichment and feed component market prices in the last few years. This paper will discuss a new standard specification that has been proposed to existing LEU metal customers and fuel fabricators. It will also cover Y-12's progress on a new mold-design that will result in a more uniform, higher quality product and eliminates two steps of the production process. This new product is expected to decrease fabrication losses by 5-10%, depending on the fabricator's process. The paper will include planned activities and the schedule associated with implementation of the new specification and product form. (author)

  1. Y-12 product improvements expected to reduce metal production costs and decrease fabrication losses

    International Nuclear Information System (INIS)

    Parker, Elaine; Hassler, Morris

    2004-01-01

    Full text: The Y-12 National Security Complex supplies uranium metal and uranium oxide feed material that is then fabricated into fuel for research reactors around the world. Over the past two to three years, Y-12 has learned a great deal about its Low Enriched Uranium (LEU) product. The LEU is produced by taking U.S. surplus Highly Enriched Uranium (HEU) and blending it with depleted or natural uranium. The surplus HEU comes from dismantled U.S. weapons parts that have been declared as surplus. Those research reactors that use LEU from Y-12 are making important contributions to international nuclear non-proliferation by using LEU rather than HEU, and by helping to disposition former weapons material. We clearly understand that our customers want to keep fuel costs as low as possible. We at Y-12 are making every effort to improve efficiencies in producing the uranium through standardizing the chemical specifications as well as the product mass and dimensional qualities. This paper will discuss the new standard specification that we have proposed to existing LEU metal customers and fuel fabricators. It will also cover Y-12's progress on a new mold-design that will result in a more uniform, higher quality product that is less expensive to produce. This new product is expected to decrease overall fabrication losses by 5-10%, depending on the fabricator's process. The paper will include planned activities and the schedule associated with implementation of the new specification and product form. (author)

  2. Loss-of-coolant accident analysis of the Savannah River new production reactor design

    International Nuclear Information System (INIS)

    Maloney, K.J.; Pryor, R.J.

    1990-11-01

    This document contains the loss-of-coolant accident analysis of the representative design for the Savannah River heavy water new production reactor. Included in this document are descriptions of the primary system, reactor vessel, and loss-of-coolant accident computer input models, the results of the cold leg and hot leg loss-of-coolant accident analyses, and the results of sensitivity calculations for the cold leg loss-of-coolant accident. 5 refs., 50 figs., 4 tabs

  3. Intensification of citrus production and soil loss in Eastern Spain

    Science.gov (United States)

    Cerdà, A.; González Peñaloza, F. A.; Burguet, M.; Giménez Morera, A.

    2012-04-01

    After land abandonment for five decades (Arnáez et al., 2010; Belmonte Serrato et al., 1999) as a widespread process in Spain, agriculture intensification is taken place. This is changing the nature of the soil erosion processes as they were known (Cerdà, 1997; Cammeraat and Imeson, 1999; Ruiz Sinoga et al., 2010; Zavala et al., 2010). Citrus production are being reallocated on slopes due to the new irrigation systems (drip-irrigation), the thermic inversion on the bottom of the valley and then the frost affecting the plantations, the high prices of the bottom valley lands and the investment in agriculture from other economic sectors such as tourism and industry. Those new plantations are based on intense pesticides and herbicides use, and erosion processes are triggered due to the sloping surface developed (Cerdà et al., 2010). Five study sites were selected in the Montesa Municipality research zone, where an increase in the orange and clementines plantations were found during the last 20 years. Measurements were perfomed by a simple method, which consist in measuring the surface characteristics: stoniness, crust, herbs, bare soil, sheet flow, rills and gullies. One thousand meters were monitored at each of the study sites and measurements were done in January and August with a precision of 1 cm. The results show that the erosion rates are controlled by the sheet erosion (78,4 %), although rill and gullies exist (managed new citrus plantation non sustainable. The intensification of agriculture is triggering new soil erosion processes to be added to the traditional ones (García Ruiz and López Bermúdez, 2009). This research study is being supported by the the research project CGL2008-02879/BTE

  4. Nitrogen Losses in Sediments of the East China Sea: Spatiotemporal Variations, Controlling Factors, and Environmental Implications

    Science.gov (United States)

    Lin, Xianbiao; Liu, Min; Hou, Lijun; Gao, Dengzhou; Li, Xiaofei; Lu, Kaijun; Gao, Juan

    2017-10-01

    Global reactive nitrogen (N) has increased dramatically in coastal marine ecosystems over the past decades and caused numerous eco-environmental problems. Coastal marine sediment plays a critical role in N losses via denitrification and anaerobic ammonium oxidation (anammox) and release of nitrous oxide (N2O). However, both the magnitude and contributions of denitrification, anammox, and N2O production in sediments still remain unclear, causing uncertainty in defining the N budget for coastal marine ecosystems. Here potential rates of N losses, and their contributions and controlling factors, were investigated in surface sediments during six cruises from 429 sites of the East China Sea. The potential rates of denitrification, anammox, and N2O production varied both spatially and seasonally, but the contribution of anammmox to total N2 production (%anammox) and N2O:N2 ratio only varied spatially. Both organic carbon and nitrate (NO3-) were important factors controlling N losses, N2O:N2 ratio, and %anammox. Our results also showed that marine organic carbon induced by eutrophication plays an important role in stimulating reactive N removal and increasing N2O production in warm seasons. The sediment N loss caused by denitrification, anammox, and N2O production in the study area were estimated at 2.2 × 106 t N yr-1, 4.6 × 105 t N yr-1, and 8 × 103 t N yr-1, respectively. Although sediments remove large quantities of reactive N, they act as an important source of N2O in this region influenced by NO3--laden rivers.

  5. Production control system specified quality sausage products

    Directory of Open Access Journals (Sweden)

    A. V. Tokarev

    2016-01-01

    Full Text Available The problem of management of production target in technological system of production of sausages of the set quality is considered in article. Decomposition of technological system is considered. Functions of management are allocated: formation of an optimum compounding of forcemeat, expert analysis of a compounding, laboratory analysis of a compounding and its statement. Information technology of interaction of these functions is offered. The mathematical problem definition of finding of an optimum compounding meat product with use of possible substitutes of ingredients is presented. This mathematical problem is a classical linear programming problem whose solution has the standard program. Since the manufacture of the finished product are various nonlinear effects are taken into account at the present time it is practically impossible, the methodology provided in this operation "Expert analysis of the formulation" and "Laboratory analysis of the finished product." An example of calculating the optimum alternative base recipe "Sausages “Viennese with cheese”" TS 9213-010-40155161-2002. For an alternative formulation demands were made at a cost of meat, the ingredient composition, as well as the final product organoleptic and physic-chemical indicators should comply with regulatory requirements "Sausages “Viennese with cheese”" TS 9213-010-40155161-2002. Indicator acid activity (pH calculated stuffing formulation should be in the range 6.0-6.3. As a partial replacement for the main raw material have been proposed acceptable substitutes. It was necessary to calculate on the basis of the formulation "Sausages “Viennese with cheese”" TS 9213-010-40155161-2002 optimal price and quality alternative formulation. As a result of depreciation of the value of alternative stuffing recipe was 14,5 % when all of the restrictions on the consumer properties. The proposed information technology implemented in the software package "Multi

  6. Longitudinal Relationships Between Organizational Justice, Productivity Loss, and Sickness Absence Among Older Employees

    NARCIS (Netherlands)

    Ybema, Jan Fekke; van der Meer, Laudry; Leijten, Fenna R M

    2016-01-01

    PURPOSE: The aim of this study was to assess whether organizational justice lowers productivity loss and sickness absence, and whether there are reverse effects of productivity loss and sickness absence on organizational justice. METHOD: A longitudinal study with 2 years of follow-up was conducted

  7. Longitudinal relationships between organizational justice, productivity, loss and sickness absence older employees

    NARCIS (Netherlands)

    Ybema, J.F.; Meer, L. van der; Leijten, F.R.M.

    2016-01-01

    Purpose The aim of this study was to assess whether organizational justice lowers productivity loss and sickness absence, and whether there are reverse effects of productivity loss and sickness absence on organizational justice.Method A longitudinal study with 2 years of follow-up was conducted

  8. Productivity loss at work; Health-related and work-related factors

    NARCIS (Netherlands)

    Heuvel, S.G. van den; Geuskens, G.A.; Hooftman, W.E.; Koppes, L.L.J.; Bossche, S.N.J. van den

    2010-01-01

    Introduction Productivity loss is an increasing problem in an aging working population that is decreasing in numbers. The aim of this study is to identify work-related and health-related characteristics associated with productivity loss, due to either sickness absence or reduced performance at work.

  9. Volatile products controlling Titan's tholins production

    KAUST Repository

    Carrasco, Nathalie

    2012-05-01

    A quantitative agreement between nitrile relative abundances and Titan\\'s atmospheric composition was recently shown with a reactor simulating the global chemistry occurring in Titan\\'s atmosphere (Gautier et al. [2011]. Icarus, 213, 625-635). Here we present a complementary study on the same reactor using an in situ diagnostic of the gas phase composition. Various initial N 2/CH 4 gas mixtures (methane varying from 1% to 10%) are studied, with a monitoring of the methane consumption and of the stable gas neutrals by in situ mass spectrometry. Atomic hydrogen is also measured by optical emission spectroscopy. A positive correlation is found between atomic hydrogen abundance and the inhibition function for aerosol production. This confirms the suspected role of hydrogen as an inhibitor of heterogeneous organic growth processes, as found in Sciamma-O\\'Brien et al. (Sciamma-O\\'Brien et al. [2010]. Icarus, 209, 704-714). The study of the gas phase organic products is focussed on its evolution with the initial methane amount [CH 4] 0 and its comparison with the aerosol production efficiency. We identify a change in the stationary gas phase composition for intermediate methane amounts: below [CH 4] 0=5%, the gas phase composition is mainly dominated by nitrogen-containing species, whereas hydrocarbons are massively produced for [CH 4] 0>5%. This predominance of N-containing species at lower initial methane amount, compared with the maximum gas-to solid conversion observed in Sciamma-O\\'Brien et al. (2010) for identical methane amounts confirms the central role played by N-containing gas-phase compounds to produce tholins. Moreover, two protonated imines (methanimine CH 2NH and ethanamine CH 3CHNH) are detected in the ion composition in agreement with Titan\\'s INMS measurements, and reinforcing the suspected role of these chemical species on aerosol production. © 2012 Elsevier Inc.

  10. Executive function in weight loss and weight loss maintenance: a conceptual review and novel neuropsychological model of weight control.

    Science.gov (United States)

    Gettens, Katelyn M; Gorin, Amy A

    2017-10-01

    Weight loss maintenance is a complex, multifaceted process that presents a significant challenge for most individuals who lose weight. A growing body of literature indicates a strong relationship between cognitive dysfunction and excessive body weight, and suggests that a subset of high-order cognitive processes known as executive functions (EF) likely play an important role in weight management. Recent reviews cover neuropsychological correlates of weight status yet fail to address the role of executive function in the central dilemma of successful weight loss maintenance. In this paper, we provide an overview of the existing literature examining executive functions as they relate to weight status and initial weight loss. Further, we propose a novel conceptual model of the relationships between EF, initial weight loss, and weight loss maintenance, mapping specific executive functions onto strategies known to be associated with both phases of the weight control process. Implications for the development of more efficacious weight loss maintenance interventions are discussed.

  11. Product control of radioactive waste

    International Nuclear Information System (INIS)

    Warnecke, E.; Giller, H.

    1989-09-01

    The aim of the seminar was to give a survey of product quality control and to find out whether the producers/conditioners of waste set and fulfil requirements for the quality of the waste. The program included the following main areas: Random sample tests; Container tests; Process qualification and inspection, and Inspections of waste from fuel element reprocessing abroad. In other lectures, there are reports on measures for producers of waste for guaranteeing the final storage requirements, on quality assurance measurements in the conditioning of waste from large research establishments and from fuel element manufacture. The calling up of waste containers and the documentation of waste data is also introduced. (orig./HP) [de

  12. Unpacking Early Work Experiences of Young Adults With Rheumatic Disease: An Examination of Absenteeism, Job Disruptions, and Productivity Loss.

    Science.gov (United States)

    Jetha, Arif; Badley, Elizabeth; Beaton, Dorcas; Fortin, Paul R; Shiff, Natalie J; Gignac, Monique A M

    2015-09-01

    To examine work absenteeism, job disruptions, and perceived productivity loss and factors associated with each outcome in young adults living with systemic lupus erythematosus (SLE) and juvenile arthritis (JA). One hundred forty-three young adults, ages 18-30 years with SLE (54.5%) and JA (45.5%), completed an online survey of work experiences. Demographic, health (e.g., fatigue, disease activity), psychosocial (e.g., independence, social support), and work context (e.g., career satisfaction, job control, self-disclosure) information was collected. Participants were asked about absenteeism, job disruptions, and perceived productivity loss in the last 6 months. Log Poisson regression analyses examined factors associated with work outcomes. A majority of participants (59%) were employed and reported a well-managed health condition. Employed respondents were satisfied with their career progress and indicated moderate job control. More than 40% of participants reported absenteeism, job disruptions, and productivity loss. Greater job control and self-disclosure, and less social support, were related to a higher likelihood of absenteeism. More disease activity was related to a greater likelihood of reporting job disruptions. Lower fatigue and higher job control were associated with a reduced likelihood of a productivity loss. Young adult respondents with rheumatic disease experienced challenges with employment, including absenteeism, job disruptions, and productivity loss. While related to greater absenteeism, job control could play a role in a young person's ability to manage their health condition and sustain productive employment. Greater attention should also be paid to understanding health factors and social support in early work experiences. © 2015, American College of Rheumatology.

  13. Evidence for the involvement of 5-lipoxygenase products in ethanol-induced intestinal plasma protein loss

    International Nuclear Information System (INIS)

    Beck, I.T.; Boyd, A.J.; Dinda, P.K.

    1988-01-01

    In this study the authors investigated whether the products of 5-lipoxygenase (5-LO) were involved in the jejunal microvascular injury induced by intraluminal ethanol (ETH). A group of rabbits was given orally a selective inhibitor of 5-LO in two 10-mg doses, 24, and 2 h before the experiments. A jejunal segment was perfused with a control solution (control segment) and an adjacent segment with an ETH-containing solution (ETH-perfused segment). In a series of experiments, they measured 5-LO activity of the jejunal segments of both groups using the generation of leukotriene B 4 (LTB 4 ) as an index. In a second series of experiments, they determined the ETH-induced intraluminal protein loss, which was taken as a measure of mucosal microvascular damage. The ETH-induced increase in protein loss was significantly lower in the treated than in the untreated group. These findings suggest that products of 5-LO are involved in the ETH-induced jejunal microvascular injury

  14. Factors Leading to the Loss of Natural Elite Control of HIV-1 Infection.

    Science.gov (United States)

    Pernas, María; Tarancón-Diez, Laura; Rodríguez-Gallego, Esther; Gómez, Josep; Prado, Julia G; Casado, Concepción; Dominguez-Molina, Beatriz; Olivares, Isabel; Coiras, Maite; León, Agathe; Rodriguez, Carmen; Benito, Jose Miguel; Rallón, Norma; Plana, Montserrat; Martinez-Madrid, Onofre; Dapena, Marta; Iribarren, Jose Antonio; Del Romero, Jorge; García, Felipe; Alcamí, José; Muñoz-Fernández, M Ángeles; Vidal, Francisco; Leal, Manuel; Lopez-Galindez, Cecilio; Ruiz-Mateos, Ezequiel

    2017-12-06

    HIV-1 elite controllers (EC) maintain undetectable viral load (VL) in the absence of antiretroviral treatment. However, these subjects have heterogeneous clinical outcomes including a proportion loosing HIV-1 control over time. In this work we compared, in a longitudinal design, transient EC, analyzed before and after the loss of virological control, versus persistent EC. The aim was to identify factors leading to the loss of natural virological control of HIV-1-infection with a longitudinal retrospective study design. Gag-specific T-cell response was assessed by in vitro intracellular poly-cytokine production quantified by flow cytometry. Viral diversity and sequence-dating were performed in proviral DNA by PCR amplification at limiting dilution in env and gag genes. The expression profile of 70 serum cytokines and chemokines was assessed by multiplex immunoassays. We identified transient EC as subjects with low Gag-specific T-cell polyfunctionality, high viral diversity and high proinflammatory cytokines levels before the loss of control. Gag-specific T-cell polyfunctionality was inversely associated with viral diversity in transient controllers before the loss of control (r=-0.8; p =0.02). RANTES was a potential biomarker of transient control. This study identified, virological and immunological factors including inflammatory biomarkers associated with two different phenotypes within EC. These results may allow a more accurate definition of EC, which could help in a better clinical management of these individuals and in the development of future curative approaches. IMPORTANCE There is a rare group of HIV-infected patients who have the extraordinary capacity to maintain undetectable viral load levels in the absence of antiretroviral treatment, the so called HIV-1 elite controllers (EC). However, there is a proportion within these subjects that eventually loses this capability. In this work we found differences in virological and immune factors including soluble

  15. Anomalous delayed loss of trapped D-D fusion products in TFTR

    International Nuclear Information System (INIS)

    Zweben, S.J.; Darrow, D.S.; Fredrickson, E.D.; Mynick, H.E.

    1993-02-01

    A new anomalous delayed loss of D-D fusion products has been measured at the bottom of the TFRR vessel. This loss is delayed by ∼ 0.2 sec with respect to the usual prompt first-orbit loss, and has a correspondingly lower energy, i.e. about half the fusion product birth energy. This loss process dominates the total fusion product loss measured 90 degrees below the midplane for plasma currents. I≥ 1.8 MA and major radii near R=2.45 m, e.g. for recent TFTR supershots. This delayed feature can occur without large coherent MED activity, although it can be strongly modulated by such activity. Several possible causes for this phenomenon are discussed, but no clear explanation for this delayed loss has yet been found

  16. The iMTA Productivity Cost Questionnaire: A Standardized Instrument for Measuring and Valuing Health-Related Productivity Losses.

    Science.gov (United States)

    Bouwmans, Clazien; Krol, Marieke; Severens, Hans; Koopmanschap, Marc; Brouwer, Werner; Hakkaart-van Roijen, Leona

    2015-09-01

    Productivity losses often contribute significantly to the total costs in economic evaluations adopting a societal perspective. Currently, no consensus exists on the measurement and valuation of productivity losses. We aimed to develop a standardized instrument for measuring and valuing productivity losses. A group of researchers with extensive experience in measuring and valuing productivity losses designed an instrument suitable for self-completion, building on preknowledge and evidence on validity. The instrument was designed to cover all domains of productivity losses, thus allowing quantification and valuation of all productivity losses. A feasibility study was performed to check the questionnaire's consistency and intelligibility. The iMTA Productivity Cost Questionnaire (iPCQ) includes three modules measuring productivity losses of paid work due to 1) absenteeism and 2) presenteeism and productivity losses related to 3) unpaid work. Questions for measuring absenteeism and presenteeism were derived from existing validated questionnaires. Because validated measures of losses of unpaid work are scarce, the questions of this module were newly developed. To enhance the instrument's feasibility, simple language was used. The feasibility study included 195 respondents (response rate 80%) older than 18 years. Seven percent (n = 13) identified problems while filling in the iPCQ, including problems with the questionnaire's instructions and routing (n = 6) and wording (n = 2). Five respondents experienced difficulties in estimating the time that would be needed for other people to make up for lost unpaid work. Most modules of the iPCQ are based on validated questions derived from previously available instruments. The instrument is understandable for most of the general public. Copyright © 2015 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

  17. Productivity loss by tobacco in Mexico in 2014

    OpenAIRE

    Carlos Manuel Guerrero-López

    2018-01-01

    Background Tobacco use causes acute and chronic diseases such as acute myocardial infarction (ICD-10: I21), cerebrovascular diseases (ICD-10: I60-I69), lung cancer (ICD-10: C34) and chronic obstructive pulmonary disease (ICD-10: J40-J44) that lead to direct and indirect costs. The latter include lost productivity due to premature death and absenteeism, among others. The objective of this study was to estimate lost productivity attributable to tobacco by premature death a...

  18. Event-Driven Control for Networked Control Systems With Quantization and Markov Packet Losses.

    Science.gov (United States)

    Yang, Hongjiu; Xu, Yang; Zhang, Jinhui

    2016-05-23

    In this paper, event-driven is used in a networked control system (NCS) which is subjected to the effect of quantization and packet losses. A discrete event-detector is used to monitor specific events in the NCS. Both an arbitrary region quantizer and Markov jump packet losses are also considered for the NCS. Based on zoom strategy and Lyapunov theory, a complete proof is given to guarantee mean square stability of the closed-loop system. Stabilization of the NCS is ensured by designing a feedback controller. Lastly, an inverted pendulum model is given to show the advantages and effectiveness of the proposed results.

  19. Single-Nucleotide Polymorphism-Microarray Ploidy Analysis of Paraffin-Embedded Products of Conception in Recurrent Pregnancy Loss Evaluations.

    Science.gov (United States)

    Maslow, Bat-Sheva L; Budinetz, Tara; Sueldo, Carolina; Anspach, Erica; Engmann, Lawrence; Benadiva, Claudio; Nulsen, John C

    2015-07-01

    To compare the analysis of chromosome number from paraffin-embedded products of conception using single-nucleotide polymorphism (SNP) microarray with the recommended screening for the evaluation of couples presenting with recurrent pregnancy loss who do not have previous fetal cytogenetic data. We performed a retrospective cohort study including all women who presented for a new evaluation of recurrent pregnancy loss over a 2-year period (January 1, 2012, to December 31, 2013). All participants had at least two documented first-trimester losses and both the recommended screening tests and SNP microarray performed on at least one paraffin-embedded products of conception sample. Single-nucleotide polymorphism microarray identifies all 24 chromosomes (22 autosomes, X, and Y). Forty-two women with a total of 178 losses were included in the study. Paraffin-embedded products of conception from 62 losses were sent for SNP microarray. Single-nucleotide polymorphism microarray successfully diagnosed fetal chromosome number in 71% (44/62) of samples, of which 43% (19/44) were euploid and 57% (25/44) were noneuploid. Seven of 42 (17%) participants had abnormalities on recurrent pregnancy loss screening. The per-person detection rate for a cause of pregnancy loss was significantly higher in the SNP microarray (0.50; 95% confidence interval [CI] 0.36-0.64) compared with recurrent pregnancy loss evaluation (0.17; 95% CI 0.08-0.31) (P=.002). Participants with one or more euploid loss identified on paraffin-embedded products of conception were significantly more likely to have an abnormality on recurrent pregnancy loss screening than those with only noneuploid results (P=.028). The significance remained when controlling for age, number of losses, number of samples, and total pregnancies. These results suggest that SNP microarray testing of paraffin-embedded products of conception is a valuable tool for the evaluation of recurrent pregnancy loss in patients without prior fetal

  20. Trends, Productivity Losses, and Associated Medical Conditions Among Toxoplasmosis Deaths in the United States, 2000–2010

    Science.gov (United States)

    Cummings, Patricia L.; Kuo, Tony; Javanbakht, Marjan; Sorvillo, Frank

    2014-01-01

    Few studies have quantified toxoplasmosis mortality, associated medical conditions, and productivity losses in the United States. We examined national multiple cause of death data and estimated productivity losses caused by toxoplasmosis during 2000–2010. A matched case–control analysis examined associations between comorbid medical conditions and toxoplasmosis deaths. In total, 789 toxoplasmosis deaths were identified during the 11-year study period. Blacks and Hispanics had the highest toxoplasmosis mortality compared with whites. Several medical conditions were associated with toxoplasmosis deaths, including human immunodeficiency virus (HIV), lymphoma, leukemia, and connective tissue disorders. The number of toxoplasmosis deaths with an HIV codiagnosis declined from 2000 to 2010; the numbers without such a codiagnosis remained static. Cumulative disease-related productivity losses for the 11-year period were nearly $815 million. Although toxoplasmosis mortality has declined in the last decade, the infection remains costly and is an important cause of preventable death among non-HIV subgroups. PMID:25200264

  1. Carrot Loss during Primary Production : Field Waste and Pack House Waste.

    OpenAIRE

    Bond, Rebekka

    2016-01-01

    Background: it has been suggested that roughly one-third of all food produced for human consumption is lost or wasted globally. The reduction of loss and waste is seen as an important societal issue with considerable ethical, ecological and economic implications. Fruit and vegetables have the highest wastage rates of any food products; (45 %). And a big part of this waste occurs during production, but empirical data on loss during primary production is limited. Carrots are an important hortic...

  2. Loss-Averse Retailer’s Optimal Ordering Policies for Perishable Products with Customer Returns

    Directory of Open Access Journals (Sweden)

    Xu Chen

    2014-01-01

    Full Text Available We investigate the loss-averse retailer’s ordering policies for perishable product with customer returns. With the introduction of the segmental loss utility function, we depict the retailer’s loss aversion decision bias and establish the loss-averse retailer’s ordering policy model. We derive that the loss-averse retailer’s optimal order quantity with customer returns exists and is unique. By comparison, we obtain that both the risk-neutral and the loss-averse retailer’s optimal order quantities depend on the inventory holding cost and the marginal shortage cost. Through the sensitivity analysis, we also discuss the effect of loss-averse coefficient and the ratio of return on the loss-averse retailer’s optimal order quantity with customer returns.

  3. Loss of alpha-like MeV fusion products from TFTR

    International Nuclear Information System (INIS)

    Zweben, S.J.; Boivin, R.L.; Diesso, M.; Hayes, S.E.; Hendel, H.W.; Park, H.; Strachan, J.D.

    1990-03-01

    A detailed comparison between the observed and expected loss of alpha-like MeV fusion products in TFTR is presented. The D-D fusion products (mainly the 1 MeV triton) were measured with an 2-D imaging scintillation detector. The expected first-orbit loss was calculated with a simple Lorentz orbit code. In almost all cases the measured loss was consistent with the expected first-orbit loss model. Exceptions are noted for small major radius plasmas and during strong MHD activity. 37 refs., 28 figs

  4. Nutrient losses and greenhouse gas emissions from dairy production in China: Lessons learned from historical changes and regional differences.

    Science.gov (United States)

    Zhang, Nannan; Bai, Zhaohai; Luo, Jiafa; Ledgard, Stewart; Wu, Zhiguo; Ma, Lin

    2017-11-15

    farms in collective or industrialized systems, while average P losses per unit of milk in different regions showed a positive relationship with intensification. In conclusion, dairy intensification was associated with increased milk yield per cow and reduced average N losses and GHG emissions per unit of milk, but reduced system level PUE and manure recycling contributed to high levels of total N and P losses. Dairy production in China is likely to continue to be intensified as a result of rising milk demand, and significant improvements must be made in manure management to control N and P losses and GHG emissions. Copyright © 2017 Elsevier B.V. All rights reserved.

  5. Economic losses to Iberian swine production from forest fires

    Science.gov (United States)

    Juan Ramon Molina Martinez; Miguel Herrera Machuca; Ricardo Zamora Diaz; Fancisco Rodriguez y Silva; Armando Gonzalez-Caban

    2011-01-01

    Most forestry property in Andalusia is privately held. One of the most important possibilities for economic development of rural areas is the use of pasture lands (dehesa in Spanish). During the spring–summer season, swine grazing takes advantage of grasses between the trees, and during winter (harsher times), they use Quercus tree fruit. Swine production has a direct...

  6. Quantitative measurement of productivity loss due to thermal discomfort

    DEFF Research Database (Denmark)

    Lan, Li; Wargocki, Pawel; Lian, Zhiwei

    2011-01-01

    discomfort caused by elevated air temperature had a negative effect on performance. A quantitative relationship was established between thermal sensation votes and task performance. It can be used for economic calculations pertaining to building design and operation when occupant productivity is considered...

  7. Using a mass balance to determine the potency loss during the production of a pharmaceutical blend.

    Science.gov (United States)

    Mackaplow, Michael B

    2010-09-01

    The manufacture of a blend containing the active pharmaceutical ingredient (API) and inert excipients is a precursor for the production of most pharmaceutical capsules and tablets. However, if there is a net water gain or preferential loss of API during production, the potency of the final drug product may be less than the target value. We use a mass balance to predict the mean potency loss during the production of a blend via wet granulation and fluidized bed drying. The result is an explicit analytical equation for the change in blend potency a function of net water gain, solids losses (both regular and high-potency), and the fraction of excipients added extragranularly. This model predicts that each 1% gain in moisture content (as determined by a loss on drying test) will decrease the API concentration of the final blend at least 1% LC. The effect of pre-blend solid losses increases with their degree of superpotency. This work supports Quality by Design by providing a rational method to set the process design space to minimize blend potency losses. When an overage is necessary, the model can help justify it by providing a quantitative, first-principles understanding of the sources of potency loss. The analysis is applicable to other manufacturing processes where the primary sources of potency loss are net water gain and/or mass losses.

  8. Examination of Icing Induced Loss of Control and Its Mitigations

    Science.gov (United States)

    Reehorst, Andrew L.; Addy, Harold E., Jr.; Colantonio, Renato O.

    2010-01-01

    Factors external to the aircraft are often a significant causal factor in loss of control (LOC) accidents. In today s aviation world, very few accidents stem from a single cause and typically have a number of causal factors that culminate in a LOC accident. Very often the "trigger" that initiates an accident sequence is an external environment factor. In a recent NASA statistical analysis of LOC accidents, aircraft icing was shown to be the most common external environmental LOC causal factor for scheduled operations. When investigating LOC accident or incidents aircraft icing causal factors can be categorized into groups of 1) in-flight encounter with super-cooled liquid water clouds, 2) take-off with ice contamination, or 3) in-flight encounter with high concentrations of ice crystals. As with other flight hazards, icing induced LOC accidents can be prevented through avoidance, detection, and recovery mitigations. For icing hazards, avoidance can take the form of avoiding flight into icing conditions or avoiding the hazard of icing by making the aircraft tolerant to icing conditions. Icing detection mitigations can take the form of detecting icing conditions or detecting early performance degradation caused by icing. Recovery from icing induced LOC requires flight crew or automated systems capable of accounting for reduced aircraft performance and degraded control authority during the recovery maneuvers. In this report we review the icing induced LOC accident mitigations defined in a recent LOC study and for each mitigation describe a research topic required to enable or strengthen the mitigation. Many of these research topics are already included in ongoing or planned NASA icing research activities or are being addressed by members of the icing research community. These research activities are described and the status of the ongoing or planned research to address the technology needs is discussed

  9. Fokker-Planck Modelling of Delayed Loss of Charged Fusion Products in TFTR

    International Nuclear Information System (INIS)

    Edenstrasser, J.W.; Goloborod'ko, V.Ya.; Reznik, S.N.; Yavorskij, V.A.; Zweben, S.

    1998-01-01

    The results of a Fokker-Planck simulation of the ripple-induced loss of charged fusion products in the Tokamak Fusion Test Reactor (TFTR) are presented. It is shown that the main features of the measured ''delayed loss'' of partially thermalized fusion products, such as the differences between deuterium-deuterium and deuterium-tritium discharges, the plasma current and major radius dependencies, etc., are in satisfactory agreement with the classical collisional ripple transport mechanism. The inclusion of the inward shift of the vacuum flux surfaces turns out to be necessary for an adequate and consistent explanation of the origin of the partially thermalized fusion product loss to the bottom of TFTR

  10. [Labor productivity losses attributable to premature deaths due to traffic injuries between 2002 and 2012].

    Science.gov (United States)

    Cubí-Mollá, Patricia; Peña-Longobardo, Luz María; Casal, Bruno; Rivera, Berta; Oliva-Moreno, Juan

    2015-09-01

    To estimate the years of potential life lost, years of potential productive life lost and the labor productivity losses attributable to premature deaths due to traffic injuries between 2002 and 2012 in Spain. Several statistical sources were combined (Spanish Registry of Deaths, Labor Force Survey and Wage Structure Survey) to develop a simulation model based on the human capital approach. This model allowed us to estimate the loss of labor productivity caused by premature deaths following traffic injuries from 2002 to 2012. In addition, mortality tables with life expectancy estimates were used to compute years of potential life lost and years of potential productive life lost. The estimated loss of labour productivity caused by fatal traffic injuries between 2002 and 2012 in Spain amounted to 9,521 million euros (baseline year 2012). The aggregate number of years of potential life lost in the period amounted to 1,433,103, whereas the years of potential productive life lost amounted to 875,729. Throughout the period analyzed, labor productivity losses and years of life lost diminished substantially. Labor productivity losses due to fatal traffic injuries decreased throughout the period analyzed. Nevertheless, the cumulative loss was alarmingly high. Estimation of the economic impact of health problems can complement conventional indicators of distinct dimensions and be used to support public policy making. Copyright © 2014 SESPAS. Published by Elsevier Espana. All rights reserved.

  11. Productivity Losses Associated with Head and Neck Cancer Using the Human Capital and Friction Cost Approaches.

    Science.gov (United States)

    Pearce, Alison M; Hanly, Paul; Timmons, Aileen; Walsh, Paul M; O'Neill, Ciaran; O'Sullivan, Eleanor; Gooberman-Hill, Rachael; Thomas, Audrey Alforque; Gallagher, Pamela; Sharp, Linda

    2015-08-01

    Previous studies suggest that productivity losses associated with head and neck cancer (HNC) are higher than in other cancers. These studies have only assessed a single aspect of productivity loss, such as temporary absenteeism or premature mortality, and have only used the Human Capital Approach (HCA). The Friction Cost Approach (FCA) is increasingly recommended, although has not previously been used to assess lost production from HNC. The aim of this study was to estimate the lost productivity associated with HNC due to different types of absenteeism and premature mortality, using both the HCA and FCA. Survey data on employment status were collected from 251 HNC survivors in Ireland and combined with population-level survival estimates and national wage data. The cost of temporary and permanent time off work, reduced working hours and premature mortality using both the HCA and FCA were calculated. Estimated total productivity losses per employed person of working age were EUR253,800 using HCA and EUR6800 using FCA. The main driver of HCA costs was premature mortality (38% of total) while for FCA it was temporary time off (73% of total). The productivity losses associated with head and neck cancer are substantial, and return to work assistance could form an important part of rehabilitation. Use of both the HCA and FCA approaches allowed different drivers of productivity losses to be identified, due to the different assumptions of the two methods. For future estimates of productivity losses, the use of both approaches may be pragmatic.

  12. Recent progress on MHD-induced loss of D-D fusion products in TFTR

    International Nuclear Information System (INIS)

    Zweben, S.J.; Darrow, D.S.; Budny, R.V.; Cheng, C.Z.; Fredrickson, E.D.; Herrmann, H.; Mynick, H.E.; Schivell, J.

    1993-08-01

    This paper reviews the recent progress made toward understanding the MHD-induced loss of D-D fusion products which has been seen on TFTR since 1988. These measurements have been made using the ''lost alpha'' diagnostic, which is described briefly. The largest MHD- induced loss occurs with coherent 3/2 or 2/1 MHD activity (kink/tearing modes), which can cause up to ∼3--5 times the first-orbit loss at I∼1.6--1.8 MA, roughly a ∼20--30% global los of D-D fusion products. Modeling of these MHD-induced losses has progressed to the point where the basic loss mechanism can be accounted for qualitatively, but the experimental results can not yet be understood quantitatively. Several alpha loss codes are being developed to improve the quantitative comparison between experiment and theory

  13. Attendance dynamics at work: the antecedents and correlates of presenteeism, absenteeism, and productivity loss.

    Science.gov (United States)

    Johns, Gary

    2011-10-01

    Presenteeism is attending work when ill. This study examined the antecedents and correlates of presenteeism, absenteeism, and productivity loss attributed to presenteeism. Predictors included work context, personal characteristics, and work experiences. Business school graduates employed in a variety of work positions (N = 444) completed a Web-based survey. Presenteeism was positively associated with task significance, task interdependence, ease of replacement, and work to family conflict and negatively associated with neuroticism, equity, job security, internal health locus of control, and the perceived legitimacy of absence. Absenteeism was positively related to task significance, perceived absence legitimacy, and family to work conflict and negatively related to task interdependence and work to family conflict. Those high on neuroticism, the unconscientious, the job-insecure, those who viewed absence as more legitimate, and those experiencing work-family conflict reported more productivity loss. Overall, the results reveal the value of a behavioral approach to presenteeism over and above a strict medical model. (PsycINFO Database Record (c) 2011 APA, all rights reserved).

  14. 40 CFR 1060.104 - What running loss emission control requirements apply?

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 32 2010-07-01 2010-07-01 false What running loss emission control... STATIONARY EQUIPMENT Emission Standards and Related Requirements § 1060.104 What running loss emission control requirements apply? (a) Engines and equipment must meet running loss requirements as follows: (1...

  15. Herbal weight-loss products: how informed are we? | van den Berg ...

    African Journals Online (AJOL)

    Outcome measures: Structured telephonic interviews were conducted with 25 dietitians and 46 pharmacists to ascertain whether or not they had heard of the individual ingredients listed in non-prescription, weight-loss products and if they knew if each of these ingredients were scientifically proven to induce weight loss.

  16. Environmental Nitrogen Losses from Commercial Crop Production Systems in the Suwannee River Basin of Florida.

    Science.gov (United States)

    Prasad, Rishi; Hochmuth, George J

    2016-01-01

    The springs and the Suwannee river of northern Florida in Middle Suwanee River Basin (MSRB) are among several examples in this planet that have shown a temporal trend of increasing nitrate concentration primarily due to the impacts of non-point sources such as agriculture. The rate of nitrate increase in the river as documented by Ham and Hatzell (1996) was 0.02 mg N L-1 y-1. Best management practices (BMPs) for nutrients were adopted by the commercial farms in the MSRB region to reduce the amounts of pollutants entering the water bodies, however the effectiveness of BMPs remains a topic of interest and discussion among the researchers, environmental administrators and policy makers about the loads of nitrogen entering into groundwater and river systems. Through this study, an initiative was taken to estimate nitrogen losses into the environment from commercial production systems of row and vegetable crops that had adopted BMPs and were under a presumption of compliance with state water quality standards. Nitrogen mass budget was constructed by quantifying the N sources and sinks for three crops (potato (Solanum tuberosum L.), sweet corn (Zea mays L.) and silage corn (Zea mays L.)) over a four year period (2010-2013) on a large representative commercial farm in northern Florida. Fertilizer N was found to be the primary N input and represented 98.0 ± 1.4, 91.0 ± 13.9, 78.0 ± 17.3% of the total N input for potato, sweet corn, and silage corn, respectively. Average crop N uptake represented 55.5%, 60.5%, and 65.2% of the mean total input N whereas average mineral N left in top 0.3 m soil layer at harvest represented 9.1%, 4.5%, and 2.6% of the mean total input N. Mean environmental N losses represented 35.3%, 34.3%, and 32.7% of the mean total input N for potato, sweet corn, and silage corn, respectively. Nitrogen losses showed a linear trend with increase in N inputs. Although, there is no quick fix for controlling N losses from crop production in MSRB, the

  17. Assessing the Relationship Between Chronic Health Conditions and Productivity Loss Trajectories

    Science.gov (United States)

    Pranksy, Glenn

    2014-01-01

    Objective: To examine the relationship between health conditions and the risk for membership in longitudinal trajectories of productivity loss. Methods: Trajectories of productivity loss from the ages of 25 to 44 years, previously identified in the National Longitudinal Survey of Youth (NLSY79), were combined with information on health conditions from the age 40 years health module in the NLSY79. Multinomial logistic regression was used to examine the relative risk of being in the low-risk, early-onset increasing risk, late-onset increasing risk, or high-risk trajectories compared with the no-risk trajectory for having various health conditions. Results: The trajectories with the greatest probability of productivity loss longitudinally had a greater prevalence of the individual health conditions and a greater total number of health conditions experienced. Conclusions: Health conditions are associated with specific longitudinal patterns of experiencing productivity loss. PMID:25479294

  18. Beam loss control in the LINAC4 design

    CERN Document Server

    Stovall, J; Crandall, K

    2010-01-01

    The Linac4 DTL reference design has been modified to reduce the power consumption in tank 1 by modifying the accelerating field and phase law. In addition we have adopted an FFDD focusing lattice throughout to minimize expected losses resulting from alignment errors. We have observed, however, that this design suffers from decreasing transverse acceptance and a sensitivity to misalignments that causes any expected beam loss to occcur at the high energy end of the DTL. In this note we investigate two solutions to increase the acceptance, decrease its sensitivity to misalignments and eliminate the potential for a beam-loss “bottleneck” at 50 MeV.

  19. Development of Production Control in Small Batch Production

    Directory of Open Access Journals (Sweden)

    Németh Péter

    2016-01-01

    Full Text Available Our aim with this paper is to develop a new performance measurement and control system for small batch production in the automotive industry. For this reason, we present our previous research results for warehouse performance measurement and adopt its methodology to production control. The proposed method is based on artificial intelligence (neural networks.

  20. Longitudinal relationships between organizational justice, productivity, loss and sickness absence older employees

    OpenAIRE

    Ybema, J.F.; Meer, L. van der; Leijten, F.R.M.

    2016-01-01

    Purpose The aim of this study was to assess whether organizational justice lowers productivity loss and sickness absence, and whether there are reverse effects of productivity loss and sickness absence on organizational justice.Method A longitudinal study with 2 years of follow-up was conducted among employed persons aged 45–64 years from the Study on Transitions in Employment, Ability and Motivation (STREAM). Participants (N = 7011) yearly filled out an online questionnaire. Structural equat...

  1. Longitudinal Relationships Between Organizational Justice, Productivity Loss, and Sickness Absence Among Older Employees

    OpenAIRE

    Ybema, Jan F.; van der Meer, Laudry; Leijten, Fenna R. M.

    2016-01-01

    PURPOSE: The aim of this study was to assess whether organizational justice lowers productivity loss and sickness absence, and whether there are reverse effects of productivity loss and sickness absence on organizational justice. METHOD: A longitudinal study with 2 years of follow-up was conducted among employed persons aged 45-64 years from the Study on Transitions in Employment, Ability and Motivation (STREAM). Participants (N = 7011) yearly filled out an online questionnaire. Structural eq...

  2. Enhanced loss of fusion products during mode conversion heating in TFTR

    International Nuclear Information System (INIS)

    Darrow, D.S.; Majeski, R.; Fisch, N.J.; Heeter, R.F.; Herrmann, H.W.; Herrmann, M.C.; Zarnstorff, M.C.; Zweben, S.J.

    1995-07-01

    Ion Bernstein waves (IBWS) have been generated by mode conversion of ion cyclotron range of frequency (ICRF) fast waves in TFTR. The loss rate of fusion products in these discharges can be large, up to 10 times the first orbit loss rate. The losses are observed at the passing/trapped boundary, indicating that passing particles are being moved onto loss orbits either by increase of their v perpendicular due to the wave, by outward transport in minor radius, or both. The lost particles appear to be DD fusion produced tritons heated to ∼1.5 times their birth energy

  3. 2. Product quality control and assurance system

    International Nuclear Information System (INIS)

    1990-01-01

    Product quality control and assurance are dealt with in relation to reliability in nuclear power engineering. The topics treated include product quality control in nuclear power engineering, product quality assurance of nuclear power plant equipment, quality assurance programs, classification of selected nuclear power equipment, and standards relating to quality control and assurance and to nuclear power engineering. Particular attention is paid to Czechoslovak and CMEA standards. (P.A.). 2 figs., 1 tab., 12 refs

  4. Quality control of static irradiation processing products

    International Nuclear Information System (INIS)

    Bao Jianzhong; Chen Xiulan; Cao Hong; Zhai Jianqing

    2002-01-01

    Based on the irradiation processing practice of the nuclear technique application laboratory of Yangzhou Institute of Agricultural Science, the quality control of irradiation processing products is discussed

  5. Wind farms production: Control and prediction

    Science.gov (United States)

    El-Fouly, Tarek Hussein Mostafa

    Wind energy resources, unlike dispatchable central station generation, produce power dependable on external irregular source and that is the incident wind speed which does not always blow when electricity is needed. This results in the variability, unpredictability, and uncertainty of wind resources. Therefore, the integration of wind facilities to utility electrical grid presents a major challenge to power system operator. Such integration has significant impact on the optimum power flow, transmission congestion, power quality issues, system stability, load dispatch, and economic analysis. Due to the irregular nature of wind power production, accurate prediction represents the major challenge to power system operators. Therefore, in this thesis two novel models are proposed for wind speed and wind power prediction. One proposed model is dedicated to short-term prediction (one-hour ahead) and the other involves medium term prediction (one-day ahead). The accuracy of the proposed models is revealed by comparing their results with the corresponding values of a reference prediction model referred to as the persistent model. Utility grid operation is not only impacted by the uncertainty of the future production of wind farms, but also by the variability of their current production and how the active and reactive power exchange with the grid is controlled. To address this particular task, a control technique for wind turbines, driven by doubly-fed induction generators (DFIGs), is developed to regulate the terminal voltage by equally sharing the generated/absorbed reactive power between the rotor-side and the gridside converters. To highlight the impact of the new developed technique in reducing the power loss in the generator set, an economic analysis is carried out. Moreover, a new aggregated model for wind farms is proposed that accounts for the irregularity of the incident wind distribution throughout the farm layout. Specifically, this model includes the wake effect

  6. Reusing salad from salad bars – simulating the effects on product loss, microbial safety and product quality

    NARCIS (Netherlands)

    Tromp, S.O.; Rijgersberg, H.; Franz, E.

    2012-01-01

    The goal of this study is to model the effects of reusing salad from salad bars to reduce product loss, while keeping microbial safety and product quality at acceptable levels. We, therefore, expand our previously developed simulation model by incorporating reuse strategies and a quality decay

  7. Context dependency and saturating effects of loss of rare soil microbes on plant productivity

    Directory of Open Access Journals (Sweden)

    Gera eHol

    2015-06-01

    Full Text Available Land use intensification is associated with loss of biodiversity and altered ecosystem functioning. Until now most studies on the relationship between biodiversity and ecosystem functioning focused on random loss of species, while loss of rare species that usually are the first to disappear received less attention. Here we test if the effect of rare microbial species loss on plant productivity depends on the origin of the microbial soil community. Soils were sampled from three land use types at two farms. Microbial communities with increasing loss of rare species were created by inoculating sterilized soils with serially diluted soil suspensions. After 8 months of incubation, the effects of the different soil communities on abiotic soil properties, soil processes, microbial community composition and plant productivity was measured. Dilution treatments resulted in increasing species loss, which was in relation to abundance of bacteria in the original field soil, without affecting most of the other soil parameters and processes. Microbial species loss affected plant biomass positively, negatively or not at all, depending on soil origin, but not on land use history. Even within fields the effects of dilution on plant biomass varied between replicates, suggesting heterogeneity in microbial community composition. The effects of medium and severe species loss on plant biomass were similar, pointing towards a saturating effect of species loss. We conclude that changes in the composition of the soil microbial community, including rare species loss, can affect plant productivity, depending on the composition of the initial microbial community. Future work on the relation between function and species loss effects should address this variation by including multiple sampling origins.

  8. Context dependency and saturating effects of loss of rare soil microbes on plant productivity.

    Science.gov (United States)

    Hol, W H Gera; de Boer, Wietse; de Hollander, Mattias; Kuramae, Eiko E; Meisner, Annelein; van der Putten, Wim H

    2015-01-01

    Land use intensification is associated with loss of biodiversity and altered ecosystem functioning. Until now most studies on the relationship between biodiversity and ecosystem functioning focused on random loss of species, while loss of rare species that usually are the first to disappear received less attention. Here we test if the effect of rare microbial species loss on plant productivity depends on the origin of the microbial soil community. Soils were sampled from three land use types at two farms. Microbial communities with increasing loss of rare species were created by inoculating sterilized soils with serially diluted soil suspensions. After 8 months of incubation, the effects of the different soil communities on abiotic soil properties, soil processes, microbial community composition, and plant productivity was measured. Dilution treatments resulted in increasing species loss, which was in relation to abundance of bacteria in the original field soil, without affecting most of the other soil parameters and processes. Microbial species loss affected plant biomass positively, negatively or not at all, depending on soil origin, but not on land use history. Even within fields the effects of dilution on plant biomass varied between replicates, suggesting heterogeneity in microbial community composition. The effects of medium and severe species loss on plant biomass were similar, pointing toward a saturating effect of species loss. We conclude that changes in the composition of the soil microbial community, including rare species loss, can affect plant productivity, depending on the composition of the initial microbial community. Future work on the relation between function and species loss effects should address this variation by including multiple sampling origins.

  9. Future Integrated Systems Concept for Preventing Aircraft Loss-of-Control Accidents

    Science.gov (United States)

    Belcastro, Christine M.; Jacobson, Steven r.

    2010-01-01

    Loss of control remains one of the largest contributors to aircraft fatal accidents worldwide. Aircraft loss-of-control accidents are highly complex in that they can result from numerous causal and contributing factors acting alone or (more often) in combination. Hence, there is no single intervention strategy to prevent these accidents. This paper presents future system concepts and research directions for preventing aircraft loss-of-control accidents.

  10. Rotor Field Oriented Control with adaptive Iron Loss Compensation

    DEFF Research Database (Denmark)

    Rasmussen, Henrik; Vadstrup, P.; Børsting, H.

    1999-01-01

    of the motor referenced to the rotor magnetizing current, and with the extension of an iron loss resistor added in parallel to the magnetizing inductance. The resistor estimator is based on the observation that the actual applied stator voltages deviates from the voltage estimated, when a motor is current......It is well known from the literature that iron loses in an induction motor implies field angle estimation errors and hence detuning problems. In this paper a new method for estimating the iron loss resistor in an induction motor is presented. The method is based on a traditional dynamic model...

  11. Controllability of runoff and soil loss from small plots treated by vinasse-produced biochar.

    Science.gov (United States)

    Sadeghi, Seyed Hamidreza; Hazbavi, Zeinab; Harchegani, Mahboobeh Kiani

    2016-01-15

    Many different amendments, stabilizers, and conditioners are usually applied for soil and water conservation. Biochar is a carbon-enriched substance produced by thermal decomposition of organic material in the absence of oxygen with the goal to be used as a soil amendment. Biochar can be produced from a wide range of biomass sources including straw, wood, manure, and other organic wastes. Biochar has been demonstrated to restore soil fertility and crop production under many conditions, but less is known about the effects of its application on soil erosion and runoff control. Therefore, a rainfall simulation study, as a pioneer research, was conducted to evaluate the performance of the application of vinasse-produced biochar on the soil erosion control of a sandy clay loam soil packed in small-sized runoff 0.25-m(2) plots with 3 replicates. The treatments were (i) no biochar (control), (ii) biochar (8 tha(-1)) application at 24h before the rainfall simulation and (iii) biochar (8 tha(-1)) application at 48 h before the rainfall simulation. Rainfall was applied at 50 mm h(-1) for 15 min. The mean change of effectiveness in time to runoff could be found in biochar application at 24 and 48 h before simulation treatment with rate of +55.10% and +71.73%, respectively. In addition, the mean runoff volume 24 and 48 h before simulation treatments decreased by 98.46% and 46.39%, respectively. The least soil loss (1.12 ± 0.57 g) and sediment concentration (1.44 ± 0.48 gl(-1)) occurred in the biochar-amended soil treated 48 h before the rainfall simulation. In conclusion, the application of vinasse-produced biochar could effectively control runoff and soil loss. This study provided a new insight into the effects of biochar on runoff, soil loss, and sediment control due to water erosion in sandy clay loam soils. Copyright © 2015 Elsevier B.V. All rights reserved.

  12. Changes in pig production in China and their effects on nitrogen and phosphorus use and losses.

    Science.gov (United States)

    Bai, Z H; Ma, L; Qin, W; Chen, Q; Oenema, O; Zhang, F S

    2014-11-04

    China's pig production has increased manifold in the past 50 years, and this has greatly affected the nitrogen and phosphorus use and losses in the pig production sector. However, the magnitude of these changes are not well-known. Here, we provide an in-depth account of the changes in pig production--N and P use and total N and P losses in the whole pig production chain during the period 1960-2010--through simulation modeling and using data from national statistics and farm surveys. For the period of 2010-2030, we explored possible effects of technological and managerial measures aimed at improving the performances of pig production via scenario analysis. We used and further developed the NUtrient flows in Food chains, Environment and Resources use (NUFER) model to calculate the feed requirement and consumption, and N and P losses in different pig production systems for all the years. Between 1960 and 2010, pig production has largely shifted from the so-called backyard system to landless systems. The N use efficiencies at fattener level increased from 18 to 28%, due to the increased animal productivity. However, the N use efficiencies at the whole-system level decreased from 46 to 11% during this period, mainly due to the increase of landless pig farms, which rely on imported feed and have no land-base for manure disposal. The total N and P losses were 5289 and 829 Gg in 2010, which is 30 and 95 times higher than in 1960. In the business as usual scenario, the total N and P losses were projected to increase by 25 and 55% between 2010 and 2030, respectively. Analyses of other scenarios indicate that packages of technological and managerial measures can decrease total N and P losses by 64 and 95%, respectively. Such improvements require major transition in the pig production sector, notably, in manure management, herd management, and feeding practices.

  13. On a multi-channel transportation loss system with controlled input and controlled service

    Directory of Open Access Journals (Sweden)

    Jewgeni Dshalalow

    1987-01-01

    Full Text Available A multi-channel loss queueing system is investigated. The input stream is a controlled point process. The service in each of m parallel channels depends on the state of the system at certain moments of time when input and service may be controlled. To obtain explicitly the limiting distribution of the main process (Zt (the number of busy channels in equilibrium, an auxiliary three dimensional process with two additional components (one of them is a semi-Markov process is treated as semi-regenerative process. An optimization problem is discussed. Simple expressions for an objective function are derived.

  14. Constipation severity is associated with productivity losses and healthcare utilization in patients with chronic constipation.

    Science.gov (United States)

    Neri, Luca; Basilisco, Guido; Corazziari, Enrico; Stanghellini, Vincenzo; Bassotti, Gabrio; Bellini, Massimo; Perelli, Ilaria; Cuomo, Rosario

    2014-04-01

    We sought to evaluate the association between constipation severity, productivity losses and healthcare utilization in a national sample of Italian patients with chronic non-organic constipation (CC). We enrolled 878 outpatients with CC. Clinical and demographic data were collected by physicians during clinical examinations. Patients completed a self-administered questionnaire (Patient Assessment of Constipation-Symptoms, PAC-SYM; Work Productivity and Activity Impairment; healthcare utilization, and Symptoms Checklist 90 Revised - Somatization Scale, SCL-90 R). Mean PAC-SYM score was 1.62 ± 0.69. Mean weekly sick time due to constipation was 2.7 ± 8.6 h and productivity losses due to presenteeism was 19.7% ± 22.3%. Adjusted productivity losses in patients with severe CC (PAC-SYM score 2.3-4.0) compared to patients with mild symptoms (PAC-SYM score 0.0-1.0) was Italian Purchase Power Parity US$ 6160. Constipation severity (PAC-SYM quintiles) was associated with higher healthcare utilization (RRPAC-SYM 4/01.84; p-value for linear trend <0.01). After adjustment for somatization scores, the association of constipation severity with productivity losses and healthcare utilization rates was attenuated yet statistically significant. We observed a graded increase in productivity losses and healthcare utilization with increasing constipation severity. Further studies should evaluate whether significant savings might be achieved with regimens aimed at reducing the constipation severity.

  15. Morphosyntactic correctness of written language production in adults with moderate to severe congenital hearing loss

    NARCIS (Netherlands)

    Huysmans, Elke; de Jong, Jan; Festen, Joost M.; Coene, Martine M.R.; Goverts, S. Theo

    2017-01-01

    Objective To examine whether moderate to severe congenital hearing loss (MSCHL) leads to persistent morphosyntactic problems in the written language production of adults, as it does in their spoken language production. Design Samples of written language in Dutch were analysed for morphosyntactic

  16. Loss Minimization and Voltage Control in Smart Distribution Grid

    DEFF Research Database (Denmark)

    Juelsgaard, Morten; Sloth, Christoffer; Wisniewski, Rafal

    2014-01-01

    This work presents a strategy for increasing the installation of electric vehicles and solar panels in low-voltage grids, while obeying voltage variation constraints. Our approach employs minimization of active power losses for coordinating consumption and generation of power, as well as reactive...

  17. Weight control behaviors of highly successful weight loss maintainers: the Portuguese Weight Control Registry.

    Science.gov (United States)

    Santos, Inês; Vieira, Paulo N; Silva, Marlene N; Sardinha, Luís B; Teixeira, Pedro J

    2017-04-01

    To describe key behaviors reported by participants in the Portuguese Weight Control Registry and to determine associations between these behaviors and weight loss maintenance. A total of 388 adults participated in this cross-sectional study. Assessments included demographic information, weight history, weight loss and weight maintenance strategies, dietary intake, and physical activity. Participants lost on average 18 kg, which they had maintained for ~28 months. Their average dietary intake was 2199 kcal/day, with 33 % of energy coming from fat. About 78 % of participants engaged in levels of moderate-plus-vigorous physical activity exceeding 150 min/week (51 % above 250 min/week), with men accumulating 82 more minutes than women (p breakfast. Greater weight loss maintenance was associated with higher levels of physical activity, walking, weight self-monitoring, establishing specific goals, and with reduced portion size use, reduced consumption of carbohydrates, and increased consumption of protein, (p < 0.05). Results indicate that weight loss maintenance is possible through the adoption of a nutritionally-balanced diet and regular participation in physical activity, but also suggest that adopting different (and, to a degree, individualized) set of behavioral strategies is key for achieving success.

  18. Quality control of radioactive waste products

    International Nuclear Information System (INIS)

    Martens, B.R.; Warnecke, E.; Odoj, R.

    1986-01-01

    The variety of incoming untreated wastes, treatment methods, waste forms and containers requires a great variety of controlling methods and principles to be applied both during waste treatment and on the final product. The paper describes product control schemes and methods, sampling systems and transportable testing equipment for waste drums, and equipment for waste cementation using in-drum stirring and subsequent fixation of solid wastes in the flowable product. (DG) [de

  19. Automatic control algorithm effects on energy production

    Science.gov (United States)

    Mcnerney, G. M.

    1981-01-01

    A computer model was developed using actual wind time series and turbine performance data to simulate the power produced by the Sandia 17-m VAWT operating in automatic control. The model was used to investigate the influence of starting algorithms on annual energy production. The results indicate that, depending on turbine and local wind characteristics, a bad choice of a control algorithm can significantly reduce overall energy production. The model can be used to select control algorithms and threshold parameters that maximize long term energy production. The results from local site and turbine characteristics were generalized to obtain general guidelines for control algorithm design.

  20. Ammonia volatilization losses from paddy fields under controlled irrigation with different drainage treatments.

    Science.gov (United States)

    He, Yupu; Yang, Shihong; Xu, Junzeng; Wang, Yijiang; Peng, Shizhang

    2014-01-01

    The effect of controlled drainage (CD) on ammonia volatilization (AV) losses from paddy fields under controlled irrigation (CI) was investigated by managing water table control levels using a lysimeter. Three drainage treatments were implemented, namely, controlled water table depth 1 (CWT1), controlled water table depth 2 (CWT2), and controlled water table depth 3 (CWT3). As the water table control levels increased, irrigation water volumes in the CI paddy fields decreased. AV losses from paddy fields reduced due to the increases in water table control levels. Seasonal AV losses from CWT1, CWT2, and CWT3 were 59.8, 56.7, and 53.0 kg N ha(-1), respectively. AV losses from CWT3 were 13.1% and 8.4% lower than those from CWT1 and CWT2, respectively. A significant difference in the seasonal AV losses was confirmed between CWT1 and CWT3. Less weekly AV losses followed by TF and PF were also observed as the water table control levels increased. The application of CD by increasing water table control levels to a suitable level could effectively reduce irrigation water volumes and AV losses from CI paddy fields. The combination of CI and CD may be a feasible water management method of reducing AV losses from paddy fields.

  1. Efficacy of a "small-changes" workplace weight loss initiative on weight and productivity outcomes.

    Science.gov (United States)

    Zinn, Caryn; Schofield, Grant M; Hopkins, Will G

    2012-10-01

    The effect of weight reduction on workplace productivity is unknown. We have investigated a "small-changes" workplace weight loss intervention on weight and productivity outcomes. Overweight/obese employees at two New Zealand worksites (n = 102) received the 12-week intervention. One site received an extra 9-month weight-maintenance component. Magnitudes of effects on weight and productivity were assessed via standardization. Both groups reduced weight at 12 weeks and maintained lost weight at 12 months. There were small possible improvements in productivity at one worksite and trivial reductions at the other by 12 weeks, with little subsequent change during maintenance in either group. At an individual level, weight change was associated with at most only small improvements or small reductions in productivity. Workplace weight loss initiatives may need to be more intensive or multidimensional to enhance productivity.

  2. Hybrid Electric Vehicle Control Strategy Based on Power Loss Calculations

    OpenAIRE

    Boyd, Steven J

    2006-01-01

    Defining an operation strategy for a Split Parallel Architecture (SPA) Hybrid Electric Vehicle (HEV) is accomplished through calculating powertrain component losses. The results of these calculations define how the vehicle can decrease fuel consumption while maintaining low vehicle emissions. For a HEV, simply operating the vehicle's engine in its regions of high efficiency does not guarantee the most efficient vehicle operation. The results presented are meant only to define a literal str...

  3. Relations of hedonic hunger and behavioral change to weight loss among adults in a behavioral weight loss program utilizing meal-replacement products.

    Science.gov (United States)

    Theim, Kelly R; Brown, Joshua D; Juarascio, Adrienne S; Malcolm, Robert R; O'Neil, Patrick M

    2013-11-01

    Greater self-regulatory behavior usage is associated with greater weight loss within behavioral weight loss treatments. Hedonic hunger (i.e., susceptibility to environmental food cues) may impede successful behavior change and weight loss. Adult men and women (N = 111, body mass index M ± SD = 35.89 ± 6.97 kg/m(2)) were assessed before and after a 15-week lifestyle change weight loss program with a partial meal-replacement diet. From pre- to post-treatment, reported weight control behavior usage improved and hedonic hunger decreased, and these changes were inversely related. Individuals with higher hedonic hunger scores at baseline showed the greatest weight loss. Similarly, participants with lower baseline use of weight control behaviors lost more weight, and increased weight control behavior usage was associated with greater weight loss-particularly among individuals with low baseline hedonic hunger. Further study is warranted regarding the significance of hedonic hunger in weight loss treatments.

  4. ISS Contingency Attitude Control Recovery Method for Loss of Automatic Thruster Control

    Science.gov (United States)

    Bedrossian, Nazareth; Bhatt, Sagar; Alaniz, Abran; McCants, Edward; Nguyen, Louis; Chamitoff, Greg

    2008-01-01

    In this paper, the attitude control issues associated with International Space Station (ISS) loss of automatic thruster control capability are discussed and methods for attitude control recovery are presented. This scenario was experienced recently during Shuttle mission STS-117 and ISS Stage 13A in June 2007 when the Russian GN&C computers, which command the ISS thrusters, failed. Without automatic propulsive attitude control, the ISS would not be able to regain attitude control after the Orbiter undocked. The core issues associated with recovering long-term attitude control using CMGs are described as well as the systems engineering analysis to identify recovery options. It is shown that the recovery method can be separated into a procedure for rate damping to a safe harbor gravity gradient stable orientation and a capability to maneuver the vehicle to the necessary initial conditions for long term attitude hold. A manual control option using Soyuz and Progress vehicle thrusters is investigated for rate damping and maneuvers. The issues with implementing such an option are presented and the key issue of closed-loop stability is addressed. A new non-propulsive alternative to thruster control, Zero Propellant Maneuver (ZPM) attitude control method is introduced and its rate damping and maneuver performance evaluated. It is shown that ZPM can meet the tight attitude and rate error tolerances needed for long term attitude control. A combination of manual thruster rate damping to a safe harbor attitude followed by a ZPM to Stage long term attitude control orientation was selected by the Anomaly Resolution Team as the alternate attitude control method for such a contingency.

  5. The Effect of the Feedback Controller on Superconducting Tokamak AC Losses + AC-CRPP user manual

    International Nuclear Information System (INIS)

    Schaerz, B.; Bruzzone, P.; Favez, J.Y.; Lister, J.B.; Zapretilina, E.

    2001-11-01

    Superconducting coils in a Tokamak are subject to AC losses when the field transverse to the coil current varies. A simple model to evaluate the AC losses has been derived and benchmarked against a complete model used in the ITER design procedure. The influence of the feedback control strategy on the AC losses is examined using this model. An improved controller is proposed, based on this study. (author)

  6. Production and loss of H- and D- in the volume of a plasma

    International Nuclear Information System (INIS)

    Hamilton, G.W.; Bacal, M.

    1981-01-01

    The study of the production and loss of negative ions, H - and D - , in the volume of a plasma has received considerable attention since the measurement of anomalously high densities of H - in 1977. The most probable mechanism for production is dissociative attachment (DA) to vibrationally highly-excited hydrogen molecules. New diagnostics developed for this purpose are photodetachment and the extension of coherent anti-Stokes Raman scattering (CARS) systems to the sensitivity required for low-pressure gases. Measurements and calculations indicate that the important loss mechanisms are diffusion to the walls at low densities and collisional destruction of several types at plasma densities above 10 10 cm -3 . Production mechanisms must be highly efficient to compete with the losses. It appears to be straightforward to extrapolate measurements and theory to the densities above 10 12 cm -3 that are required for an intense source of D - for neutral beam injection into magnetically-confined fusion devices

  7. Quality control of pesticide products

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2009-07-15

    In light of an established need for more efficient analytical procedures, this publication, which documents the findings of an IAEA coordinated research project (CRP) on “Quality Control of Pesticide Products”, simplifies the existing protocol for pesticide analysis while simultaneously upholding existing standards of quality. This publication includes both a report on the development work done in the CRP and a training manual for use by pesticide analysis laboratories. Based on peer reviewed and internationally recognized methods published by the Association of Analytical Communities (AOAC) and the Collaborative International Pesticides Analytical Council (CIPAC), this report provides laboratories with versatile tools to enhance the analysis of pesticide chemicals and to extend the scope of available analytical repertoires. Adoption of the proposed analytical methodologies promises to reduce laboratories’ use of solvents and the time spent on reconfiguration and set-up of analytical equipment.

  8. Quality control of pesticide products

    International Nuclear Information System (INIS)

    2009-07-01

    In light of an established need for more efficient analytical procedures, this publication, which documents the findings of an IAEA coordinated research project (CRP) on “Quality Control of Pesticide Products”, simplifies the existing protocol for pesticide analysis while simultaneously upholding existing standards of quality. This publication includes both a report on the development work done in the CRP and a training manual for use by pesticide analysis laboratories. Based on peer reviewed and internationally recognized methods published by the Association of Analytical Communities (AOAC) and the Collaborative International Pesticides Analytical Council (CIPAC), this report provides laboratories with versatile tools to enhance the analysis of pesticide chemicals and to extend the scope of available analytical repertoires. Adoption of the proposed analytical methodologies promises to reduce laboratories’ use of solvents and the time spent on reconfiguration and set-up of analytical equipment

  9. Estimation of evaporative losses during storage of crude oil and petroleum products

    Directory of Open Access Journals (Sweden)

    Mihajlović Marina A.

    2013-01-01

    Full Text Available Storage of crude oil and petroleum products inevitably leads to evaporative losses. Those losses are important for the industrial plants mass balances, as well as for the environmental protection. In this paper, estimation of evaporative losses was performed using software program TANKS 409d which was developed by the Agency for Environmental Protection of the United States - US EPA. Emissions were estimated for the following types of storage tanks: fixed conical roof tank, fixed dome roof tank, external floating roof tank, internal floating roof tank and domed external floating roof tank. Obtained results show quantities of evaporated losses per tone of stored liquid. Crude oil fixed roof storage tank losses are cca 0.5 kg per tone of crude oil. For floating roof, crude oil losses are 0.001 kg/t. Fuel oil (diesel fuel and heating oil have the smallest evaporation losses, which are in order of magnitude 10-3 kg/tone. Liquids with higher Reid Vapour Pressure have very high evaporative losses for tanks with fixed roof, up to 2.07 kg/tone. In case of external floating roof tank, losses are 0.32 kg/tone. The smallest losses are for internal floating roof tank and domed external floating roof tank: 0.072 and 0.044, respectively. Finally, it can be concluded that the liquid with low volatility of low BTEX amount can be stored in tanks with fixed roof. In this case, the prevailing economic aspect, because the total amount of evaporative loss does not significantly affect the environment. On the other hand, storage of volatile derivatives with high levels of BTEX is not justified from the economic point of view or from the standpoint of the environment protection.

  10. Quality control in tile production

    Science.gov (United States)

    Kalviainen, Heikki A.; Kukkonen, Saku; Hyvarinen, Timo S.; Parkkinen, Jussi P. S.

    1998-10-01

    This work studies visual quality control in ceramics industry. In tile manufacturing, it is important that in each set of tiles, every single tile looks similar. For example, the tiles should have similar color and texture. Our goal is to design a machine vision system that can estimate the sufficient similarity or same appearance to the human eye. Currently, the estimation is usually done by human vision. Differing from other approaches our aim is to use accurate spectral representation of color, and we are comparing spectral features to the RGB color features. A laboratory system for color measurement is built. Experimentations with five classes of brown tiles are presented. We use chromaticity RGB features and several spectral features for classification with the k-NN classifier and with a neural network, called Self-Organizing Map. We can classify many of the tiles but there are several problems that need further investigations: larger training and test sets are needed, illuminations effects must be studied further, and more suitable spectral features are needed with more sophisticated classifiers. It is also interesting to develop further the neural approach.

  11. Gender differences in scalp hair growth rates are maintained but reduced in pattern hair loss compared to controls.

    Science.gov (United States)

    Van Neste, D J J; Rushton, D H

    2016-08-01

    Hair loss is related to follicular density, programmed regrowth and hair productivity. The dissatisfaction with hair growth in patients experiencing hair loss might be due to slower linear hair growth rate (LHGR). LHGR and hair diameter was evaluated in Caucasian controls and patients with patterned hair loss employing the validated non-invasive, contrast-enhanced-phototrichogram with exogen collection. We evaluated 59,765 anagen hairs (controls 24,609, patients 35,156) and found thinner hairs grew slower than thicker hairs. LHGR in normal women was generally higher than in normal men. LHGR correlates with hair diameter (P hair of equal thickness in controls, subjects affected with patterned hair loss showed reduced hair growth rates, an observation found in both male and female patients. Males with pattern hair loss showed further reduction in growth rates as clinical severity worsened. However, sample size limitations prevented statistical evaluation of LHGR in severely affected females. Caucasian ethnicity. In pattern hair loss, LHGR significantly contributes to the apparent decrease in hair volume in affected areas. In early onset, LHRG might have a prognostic value in females but not in males. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  12. A randomised controlled trial of expectant management versus surgical evacuation of early pregnancy loss.

    Science.gov (United States)

    Nadarajah, Ravichandran; Quek, Yek Song; Kuppannan, Kaliammah; Woon, Shu Yuan; Jeganathan, Ravichandran

    2014-07-01

    To show whether a clinically significant difference in success rates exists between expectant and surgical management of early pregnancy loss. Randomised controlled trial comparing expectant versus surgical management of early pregnancy loss over a 1-year period from 1st January to 31st December 2009 at Sultanah Aminah Hospital, Johor Bahru. Pregnant women with missed or incomplete miscarriages at gestations up to 14 weeks were recruited in this study. The success rate in the surgical group was measured as curettage performed without any complications during or after the procedure, while the success rate in the expectant group was defined as complete spontaneous expulsion of products of conception within 6 weeks without any complication. A total of 360 women were recruited and randomised to expectant or surgical management, with 180 women in each group. There was no statistically significant difference in the success rate between the groups and between the different types of miscarriage. With expectant management, 131 (74%) patients had a complete spontaneous expulsion of products of conception, of whom 106 (83%) women miscarried within 7 days. However, the rates of unplanned admissions (18.1%) and unplanned surgical evacuations (17.5%) in the expectant group were significantly higher than the rates (7.4% and 8% respectively) in the surgical group. The complications in both groups were similar. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

  13. Event-triggered control systems under packet losses

    NARCIS (Netherlands)

    Dolk, V.S.; Heemels, W.P.M.H.

    2017-01-01

    Networked control systems (NCSs) offer many benefits in terms of increased flexibility and maintainability but might also suffer from inevitable imperfections such as packet dropouts and limited communications resources. In this paper, (static and dynamic) event-triggered control (ETC) strategies

  14. Analysis of pressure losses in the diffuser of a control valve

    Science.gov (United States)

    Turecký, Petr; Mrózek, Lukáš; Tajč, Ladislav; Kolovratník, Michal

    The pressure loss in the diffuser of a control valve is evaluated by using CFD computations. Pressure ratios and lifts of a cone for the recommended flow characteristics of an experimental turbine are considered. The pressure loss in a valve is compared with the pressure loss in a nozzle, i.e. the embodiment of the valve without a cone. Computations are carried out for the same mass flow. Velocity profiles are evaluated in both versions of computations. Comparison of computed pressure losses, with the loss evaluated by using relations for diffusers with the ideal velocity conditions in the input cross-section, is carried out.

  15. Analysis of pressure losses in the diffuser of a control valve

    Directory of Open Access Journals (Sweden)

    Turecký Petr

    2017-01-01

    Full Text Available The pressure loss in the diffuser of a control valve is evaluated by using CFD computations. Pressure ratios and lifts of a cone for the recommended flow characteristics of an experimental turbine are considered. The pressure loss in a valve is compared with the pressure loss in a nozzle, i.e. the embodiment of the valve without a cone. Computations are carried out for the same mass flow. Velocity profiles are evaluated in both versions of computations. Comparison of computed pressure losses, with the loss evaluated by using relations for diffusers with the ideal velocity conditions in the input cross-section, is carried out.

  16. Acute drug induced hepatitis secondary to a weight loss product purchased over the internet

    Directory of Open Access Journals (Sweden)

    Cross Tim JS

    2007-06-01

    Full Text Available Abstract Background Many people now seek alternative methods of weight loss. The internet provides a readily available source of weight reduction products, the ingredients of which are often unclear. The authors describe a case of acute hepatitis in a 20 year old woman caused by such a product purchased over the internet. Case Presentation A 20-year old woman presented with a two day history of abdominal pain, vomiting and jaundice. There were no identifiable risk factors for chronic liver disease. Liver function tests demonstrated an acute hepatitis (aminoaspartate transaminase 1230 IU/L. A chronic liver disease screen was negative. The patient had started a weight loss product (Pro-Lean, purchased over the internet two weeks prior to presentation. The patient was treated conservatively, and improved. The sequence of events suggests an acute hepatitis caused by an herbal weight loss product. Conclusion This case report highlights the dangers of weight loss products available to the public over the internet, and the importance of asking specifically about alternative medicines in patients who present with an acute hepatitis.

  17. A new approach to determining pharmacologic adulteration of herbal weight loss products.

    Science.gov (United States)

    De Carvalho, L M; Cohen, P A; Silva, C V; Moreira, A P L; Falcão, T M; Dal Molin, T R; Zemolin, G; Martini, M

    2012-01-01

    Pharmaceutical adulterants are commonly found in herbal weight loss products, and analytical techniques for detecting these adulterants have become increasingly important to the public health community. Previously we reported a novel analytical method for the determination of adulterants in herbal formulations by capillary electrophoresis with contactless conductivity detection. The current study refines this previously described technique by testing if anxiolytics, diuretics, and laxatives interfered with the detection of anorectics and antidepressants. A survey of herbal weight loss products sold by compounding pharmacies in Brazil were analysed to determine the presence of pharmaceutical adulterants. A total of 106 herbal products, collected from 73 pharmacies in nine Brazilian states, were analysed for amfepramone, sibutramine, fenproporex, fluoxetine, paroxetine, sertraline and bupropion using the new analytical method. The method permitted the rapid and selective screening for the seven adulterants. Of the 106 weight loss products sampled, four (3.8%) were found to be adulterated by fenproporex or sibutramine. The adulterated samples were compounded by four different pharmacies located in three different Brazilian states. The novel capillary electrophoresis method we developed may be a useful tool for public health organisations tasked with analysing herbal weight loss products.

  18. Losses in chopper-controlled DC series motors

    Science.gov (United States)

    Hamilton, H. B.

    1982-01-01

    Motors for electric vehicle (EV) applications must have different features than dc motors designed for industrial applications. The EV motor application is characterized by the following requirements: (1) the need for highest possible efficiency from light load to overload, for maximum EV range, (2) large short time overload capability (The ratio of peak to average power varies from 5/1 in heavy city traffic to 3/1 in suburban driving situations) and (3) operation from power supply voltage levels of 84 to 144 volts (probably 120 volts maximum). A test facility utilizing a dc generator as a substitute for a battery pack was designed and utilized. Criteria for the design of such a facility are presented. Two motors, differing in design detail, commercially available for EV use were tested. Losses measured are discussed, as are waves forms and their harmonic content, the measurements of resistance and inductance, EV motor/chopper application criteria, and motor design considerations.

  19. Crop production and economic loss due to wind erosion in hot arid ecosystem of India

    Science.gov (United States)

    Santra, Priyabrata; Moharana, P. C.; Kumar, Mahesh; Soni, M. L.; Pandey, C. B.; Chaudhari, S. K.; Sikka, A. K.

    2017-10-01

    Wind erosion is a severe land degradation process in hot arid western India and affects the agricultural production system. It affects crop yield directly by damaging the crops through abrasion, burial, dust deposition etc. and indirectly by reducing soil fertility. In this study, an attempt was made to quantify the indirect impact of wind erosion process on crop production loss and associated economic loss in hot arid ecosystem of India. It has been observed that soil loss due to wind erosion varies from minimum 1.3 t ha-1 to maximum 83.3 t ha-1 as per the severity. Yield loss due to wind erosion was found maximum for groundnut (Arachis hypogea) (5-331 kg ha-1 yr-1), whereas minimum for moth bean (Vigna aconitifolia) (1-93 kg ha-1 yr-1). For pearl millet (Pennisetum glaucum), which covers a major portion of arable lands in western Rajasthan, the yield loss was found 3-195 kg ha-1 yr-1. Economic loss was found higher for groundnut and clusterbean (Cyamopsis tetragonoloba) than rest crops, which are about

  20. Self-governance, control and loss of control amongst drink-drivers

    DEFF Research Database (Denmark)

    Järvinen, Margaretha; Fynbo, Lars

    2011-01-01

    This paper analyses driving under the influence of alcohol and drugs (DUI) from a governmentality perspective. The paper is based on qualitative interviews with 25 persons, convicted of drink-driving and at the time of the interviews participating in Alcohol/Traffic courses in Denmark (mandatory...... feelings of control loss; and occasional drinkers or drug users with limited experience of drink-driving. The paper analyses drink-driving as a form of “failed self-governance” and shows how some of the convicted drink-drivers negotiate quilt and blame by either justifying their DUI (they were “in full...... courses for DUI-convicted people). Four drink-driver profiles are identified: regular heavy drinkers who regard themselves as addicted; regular drinkers who claim they are in control of both their alcohol use and their drink-driving; occasional multi-substance users who associate their DUI with strong...

  1. Microbiological Quality Control of Probiotic Products

    OpenAIRE

    Astashkina, A.P.; Khudyakova, L.I.; Kolbysheva, Y.V.

    2014-01-01

    Microbiological quality control of probiotic products such as Imunele, Dannon, Pomogayka showed that they contain living cultures of the Lactobacillus Bifidobacterium genus in the amount of 107 CFU/ml, which corresponds to the number indicated on the label of products. It is identified that the survival rate of test-strains cultured with pasteurized products does not exceed 10%. The cell concentration of target-microorganisms was reduced by 20-45% after the interaction with living probiotic b...

  2. Optimising product recycling chains by control theory

    NARCIS (Netherlands)

    Kleineidam, U.; Lambert, A.J.D.; Blansjaar, J.; Kok, J.J.; Heijningen, van R.J.J.

    2000-01-01

    In this paper, a modelling method is described for production chains including recycling. It consists of elementary models of standard production operations, connected by market modules. The models are analysed using methods from control theory. These methods allow us to investigate essential

  3. Management Control in New Product Development

    DEFF Research Database (Denmark)

    Jørgensen, Brian; Messner, Martin

    2009-01-01

    organizations to better manage tensions between efficiency and flexibility, which is arguably a key issue in many organizations today. Our paper contributes to this stream of research by detailing how enabling control functions in the particular setting of new product development. To this end, we draw upon......Several studies in management control have drawn upon the concepts of coercive and enabling forms of bureaucracy (Adler and Borys 1996) to discuss how the features of a control system may affect employees' attitudes toward control. This question is relevant because enabling forms of control allow...... and flexibility. In addition, our paper sets out to explore how strategic change can influence the operation of enabling control. Focusing on the introduction of a new product strategy in our case organization, we describe employees' repair efforts in adapting the control system to their own needs. We find...

  4. Fusion-product energy loss in inertial confinement fusion plasmas with applications to target burns

    International Nuclear Information System (INIS)

    Harris, D.B.; Miley, G.H.

    1984-01-01

    Inertial confinement fusion (ICF) has been proposed as a competitor to magnetic fusion in the drive towards energy production, but ICF target performance still contains many uncertainties. One such area is the energy-loss rate of fusion products. This situation is due in part to the unique plasma parameters encountered in ICF plasmas which are compressed to more than one-thousand times solid density. The work presented here investigates three aspects of this uncertainty

  5. Antecedent conditions control carbon loss and downstream water quality from shallow, damaged peatlands.

    Science.gov (United States)

    Grand-Clement, E; Luscombe, D J; Anderson, K; Gatis, N; Benaud, P; Brazier, R E

    2014-09-15

    Losses of dissolved organic carbon (DOC) from drained peatlands are of concern, due to the effects this has on the delivery of ecosystem services, and especially on the long-term store of carbon and the provision of drinking water. Most studies have looked at the effect of drainage in deep peat; comparatively, little is known about the behaviour of shallow, climatically marginal peatlands. This study examines water quality (DOC, Abs(400), pH, E4/E6 and C/C) during rainfall events from such environments in the south west UK, in order to both quantify DOC losses, and understand their potential for restoration. Water samples were taken over a 19 month period from a range of drains within two different experimental catchments in Exmoor National Park; data were analysed on an event basis. DOC concentrations ranging between 4 and 21 mg L(-1) are substantially lower than measurements in deep peat, but remain problematic for the water treatment process. Dryness plays a critical role in controlling DOC concentrations and water quality, as observed through spatial and seasonal differences. Long-term changes in depth to water table (30 days before the event) are likely to impact on DOC production, whereas discharge becomes the main control over DOC transport at the time scale of the rainfall/runoff event. The role of temperature during events is attributed to an increase in the diffusion of DOC, and therefore its transport. Humification ratios (E4/E6) consistently below 5 indicate a predominance of complex humic acids, but increased decomposition during warmer summer months leads to a comparatively higher losses of fulvic acids. This work represents a significant contribution to the scientific understanding of the behaviour and functioning of shallow damaged peatlands in climatically marginal locations. The findings also provide a sound baseline knowledge to support research into the effects of landscape restoration in the future. Crown Copyright © 2014. Published by

  6. Review of nonchemical methods for controlling stored products pests

    International Nuclear Information System (INIS)

    Ignatowicz, S.

    1996-01-01

    Fumigation of stored products with methyl bromide has been an important means of limiting the loss of quality and quantity of these commodities that are subject to attack by cosmopolitan stored product pests. Methyl bromide was identified as a substance depleting ozone, and is expected to be withdrawn from production, importation, and use in Poland and other countries soon after 2000. Based on the current knowledge, most of alternatives to methyl bromide (controlled atmospheres, heat, cold, irradiation, biotechnical methods, inert dusts, biological methods, sanitation) have researchable gaps or other constraints. None of these alternatives used alone will replace methyl bromide. Successful pest control in the absence of methyl bromide will require the development of sophisticated pest monitoring and decision support systems to enable the use of integrated pest management strategies. (author)

  7. Related regulation of quality control of industrial products

    International Nuclear Information System (INIS)

    1983-04-01

    This book introduce related regulation of quality control of industrial products, which includes regulations of industrial products quality control, enforcement ordinance of industrial products quality control, enforcement regulation of quality control of industrial products, designated items with industrial production quality indication, industrial production quality test, and industrial production quality test organization and management tips of factory quality by grade.

  8. Radiological control of food importation products

    International Nuclear Information System (INIS)

    Aguirre G, J.

    2003-01-01

    Nowadays exists the possibility of marketing products possibly polluted with radioactive isotopes, by that some countries like Mexico, they have been given to the task of creating legal bases and the necessary infrastructure with the end of carrying out the radiological surveillance of nutritious import products. In this work the legal bases that our country has established for the radiological control are presented besides the results of this radiological control carried out through the gamma spectroscopy analysis of nutritious import products sent to our country through diverse companies that import foods produced mainly in European countries. (Author)

  9. Soil fertility and soil loss constraints on crop residue removal for energy production

    Energy Technology Data Exchange (ETDEWEB)

    Flaim, S.

    1979-07-01

    A summary of the methodologies used to estimate the soil fertility and soil loss constraints on crop residue removal for energy production is presented. Estimates of excess residue are developed for wheat in north-central Oklahoma and for corn and soybeans in central Iowa. These sample farming situations are analyzed in other research in the Analysis Division of the Solar Energy Research Institute.

  10. Optimization of the conditions for the precipitation of thorium oxalate. II. Minimization of the product losses

    International Nuclear Information System (INIS)

    Pazukhin, E.M.; Smirnova, E.A.; Krivokhatskii, A.S.; Pazukhina, Yu.L.; Kiselev, P.P.

    1987-01-01

    The precipitation of thorium as a poorly soluble oxalate was investigated. An equation relating the concentrations of the metal and nitric acid in the initial solution and the amount of precipitant required to minimize the product losses was derived. A graphical solution of the equation is presented for the case where the precipitant is oxalic acid at a concentration of 0.78 M

  11. Nitrogen loss from grassland on peat soils through nitrous oxide production.

    NARCIS (Netherlands)

    Koops, J.G.; Beusichem, van M.L.; Oenema, O.

    1997-01-01

    Nitrous oxide (N2O) in soils is produced through nitrification and denitrification. The N2O produced is considered as a nitrogen (N) loss because it will most likely escape from the soil to the atmosphere as N2O or N2. Aim of the study was to quantify N2O production in grassland on peat soils in

  12. Network-based production quality control

    Science.gov (United States)

    Kwon, Yongjin; Tseng, Bill; Chiou, Richard

    2007-09-01

    This study investigates the feasibility of remote quality control using a host of advanced automation equipment with Internet accessibility. Recent emphasis on product quality and reduction of waste stems from the dynamic, globalized and customer-driven market, which brings opportunities and threats to companies, depending on the response speed and production strategies. The current trends in industry also include a wide spread of distributed manufacturing systems, where design, production, and management facilities are geographically dispersed. This situation mandates not only the accessibility to remotely located production equipment for monitoring and control, but efficient means of responding to changing environment to counter process variations and diverse customer demands. To compete under such an environment, companies are striving to achieve 100%, sensor-based, automated inspection for zero-defect manufacturing. In this study, the Internet-based quality control scheme is referred to as "E-Quality for Manufacturing" or "EQM" for short. By its definition, EQM refers to a holistic approach to design and to embed efficient quality control functions in the context of network integrated manufacturing systems. Such system let designers located far away from the production facility to monitor, control and adjust the quality inspection processes as production design evolves.

  13. Systematic losses of outdoor production from heat stress and climate change

    Science.gov (United States)

    Buzan, J. R.; Huber, M.

    2017-12-01

    Heat stress impacts humans today with heat waves, worker reductions, and health issues. Here we show novel results in labor productivity for outdoor work due to global warming. We use the HumanIndexMod to calculate 4x daily values of Simplified Wet Bulb Globe Temperature index (sWBGT) from the CMIP5 archive normalized by global mean surface temperature changes. Previous work shows that scaling of sWBGT is robust across the CMIP5 archive. We calculate total annual outdoor labor capacity from our scaled sWBGT results. Our results show modern day losses due to heat stress impacting outdoor work for low latitudes (and parts of Eastern China and the Southern United States). At 2°C of climate change, up to 20% losses to total capacity impact Midwestern United States, while the Southern United States suffers >20% losses. Western Coastal Africa suffers annual losses at >80%, along with the Amazon Basin and the greater South East Asia region. India suffers losses >50% annually. At +5°C, the estimated mean global change by 2100, the Equatorial region (Northern Australia and Northern Bolivia to Western Coastal Africa and Southern India) has complete cessation of annual outdoor work. The Midwest United States suffers losses up to 30%, and the Gulf of Mexico suffers losses >50%. Our results imply that small changes in global mean surface temperature (2°C) will lead to crippling losses to outdoor work annually, and ≥5°C losses will lead to cessation of labor for more than half the world's population.

  14. Changes in weight control behaviors and hedonic hunger during a 12-week commercial weight loss program.

    Science.gov (United States)

    O'Neil, Patrick M; Theim, Kelly R; Boeka, Abbe; Johnson, Gail; Miller-Kovach, Karen

    2012-12-01

    Greater use of key self-regulatory behaviors (e.g., self-monitoring of food intake and weight) is associated with greater weight loss within behavioral weight loss treatments, although this association is less established within widely-available commercial weight loss programs. Further, high hedonic hunger (i.e., susceptibility to environmental food cues) may present a barrier to successful behavior change and weight loss, although this has not yet been examined. Adult men and women (N=111, body mass index M±SD=31.5±2.7kg/m(2)) were assessed before and after participating in a 12-week commercial weight loss program. From pre- to post-treatment, reported usage of weight control behaviors improved and hedonic hunger decreased, and these changes were inversely associated. A decrease in hedonic hunger was associated with better weight loss. An improvement in reported weight control behaviors (e.g., self-regulatory behaviors) was associated with better weight loss, and this association was even stronger among individuals with high baseline hedonic hunger. Findings highlight the importance of specific self-regulatory behaviors within weight loss treatment, including a commercial weight loss program developed for widespread community implementation. Assessment of weight control behavioral skills usage and hedonic hunger may be useful to further identify mediators of weight loss within commercial weight loss programs. Future interventions might specifically target high hedonic hunger and prospectively examine changes in hedonic hunger during other types of weight loss treatment to inform its potential impact on sustained behavior change and weight control. Copyright © 2012 Elsevier Ltd. All rights reserved.

  15. Modern control of mineral wool production process

    Directory of Open Access Journals (Sweden)

    Stankov Stanko P.

    2013-01-01

    Full Text Available In this paper, the control of the plant for mineral wool production consisting of a number of the technological units of different sizes and complexity is considered. The application of modern equipment based on PLC (Programmable Logic Controller and SCADA (Supervisory Control And Data Acquisition configuration provides optimal control of technological process. Described supervisory and control system is consisting of a number of units doing decentralized distributed control of technological entities where all possible situation are considered during work of machines and devices, which are installed in electric drive and are protected from technological and electrical accident. Transformer station and diesel engine, raw materials transport and dosage, processes in dome oven, centrifuges, polycondensation (PC chamber, burners, compressor station, binder preparation and dosage, wool cutting, completed panel packing and their transport to storehouse are controlled. Process variables and parameters like as level, flow, velocity, temperature, pressure, etc. are controlled. Control system is doing identification of process states changes, diagnostic and prediction of errors and provides prediction of behavior of control objects when input flows of materials and generates optimal values of control variables due to decreasing downtime and technic - economical requires connected to wool quality to be achieved. Supervisory and control system either eliminates unwanted changes in the production line or restricts them within the allowable limits according to the technology. In this way, the optimization of energy and raw materials consumption and appropriate products quality is achieved, where requirements are satisfied in accordance with process safety and environmental standards. SCADA provides a visual representation of controlled and uncontrolled parts of the technological process, processing alarms and events, monitoring of the changes of relevant

  16. Weight loss maintenance in relation to locus of control: The MedWeight study.

    Science.gov (United States)

    Anastasiou, Costas A; Fappa, Evaggelia; Karfopoulou, Eleni; Gkza, Anastasia; Yannakoulia, Mary

    2015-08-01

    Locus of control, i.e. the degree of an individual's belief on the control of his/her life, has been related to many health outcomes, including weight loss in overweight/obese individuals. No information is available on the impact of locus of control in maintaining weight loss. We aimed to investigate the effect of locus of control in weight loss maintenance and explore potential associations with lifestyle factors. Study participants included 239 individuals (41% males) who had lost at least 10% of body weight in the past and either maintained the loss (maintainers: weight maintenance of at least 10% of initial weight) or regained it (regainers). Locus of control was defined by a relevant multi-dimensional scale; participants were categorised to internals and externals, based on "internal" and "others" sub-scales. A significant interaction was found between locus of control and weight loss maintenance status (p locus of control. Individualised treatment, according to locus of control, may increase weight loss maintenance rates in former overweight/obese individuals. Copyright © 2015 Elsevier Ltd. All rights reserved.

  17. Annual Medical Expenditure and Productivity Loss Among Colorectal, Female Breast, and Prostate Cancer Survivors in the United States.

    Science.gov (United States)

    Zheng, Zhiyuan; Yabroff, K Robin; Guy, Gery P; Han, Xuesong; Li, Chunyu; Banegas, Matthew P; Ekwueme, Donatus U; Jemal, Ahmedin

    2016-05-01

    There are limited nationally representative estimates of the annual economic burden among survivors of the three most prevalent cancers (colorectal, female breast, and prostate) in both nonelderly and elderly populations in the United States. The 2008 to 2012 Medical Expenditure Panel Survey data were used to identify colorectal (n = 540), female breast (n = 1568), and prostate (n = 1170) cancer survivors and individuals without a cancer history (n = 109 423). Excess economic burden attributable to cancer included per-person excess annual medical expenditures and productivity losses (employment disability, missed work days, and days stayed in bed). All analyses were stratified by cancer site and age (nonelderly: 18-64 years vs elderly: ≥ 65 years). Multivariable analyses controlled for age, sex, race/ethnicity, marital status, education, number of comorbidities, and geographic region. All statistical tests were two-sided. Compared with individuals without a cancer history, cancer survivors experienced annual excess medical expenditures (for the nonelderly population, colorectal: $8647, 95% confidence interval [CI] = $4932 to $13 974, P productivity loss at work (7.2 days, P productivity losses as those without a cancer history. Colorectal, breast, and prostate cancer survivors experienced statistically significantly higher economic burden compared with individuals without a cancer history; however, excess economic burden varies by cancer site and age. Targeted efforts will be important in reducing the economic burden of colorectal, breast, and prostate cancer. © The Author 2015. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

  18. Trends, productivity losses, and associated medical conditions among toxoplasmosis deaths in the United States, 2000-2010.

    Science.gov (United States)

    Cummings, Patricia L; Kuo, Tony; Javanbakht, Marjan; Sorvillo, Frank

    2014-11-01

    Few studies have quantified toxoplasmosis mortality, associated medical conditions, and productivity losses in the United States. We examined national multiple cause of death data and estimated productivity losses caused by toxoplasmosis during 2000-2010. A matched case-control analysis examined associations between comorbid medical conditions and toxoplasmosis deaths. In total, 789 toxoplasmosis deaths were identified during the 11-year study period. Blacks and Hispanics had the highest toxoplasmosis mortality compared with whites. Several medical conditions were associated with toxoplasmosis deaths, including human immunodeficiency virus (HIV), lymphoma, leukemia, and connective tissue disorders. The number of toxoplasmosis deaths with an HIV codiagnosis declined from 2000 to 2010; the numbers without such a codiagnosis remained static. Cumulative disease-related productivity losses for the 11-year period were nearly $815 million. Although toxoplasmosis mortality has declined in the last decade, the infection remains costly and is an important cause of preventable death among non-HIV subgroups. © The American Society of Tropical Medicine and Hygiene.

  19. Arthritis-related work transitions: a prospective analysis of reported productivity losses, work changes, and leaving the labor force.

    Science.gov (United States)

    Gignac, Monique A M; Cao, Xingshan; Lacaille, Diane; Anis, Aslam H; Badley, Elizabeth M

    2008-12-15

    To prospectively examine arthritis-related productivity losses, work changes, and leaving employment, the relationships among these work transitions, and the factors associated with them. Participants with inflammatory arthritis or osteoarthritis were interviewed at 4 time points, 18 months apart, using a structured questionnaire. At baseline (T1), all participants (n = 490; 381 women, 109 men) were employed. At T2, T3, and T4, the sample decreased to 413, 372, and 349 participants, respectively. Respondents were recruited using community advertising and from rheumatology and rehabilitation clinics. Work transitions considered were productivity losses (absenteeism, job disruptions), work changes (reduced hours, changing jobs), and leaving employment. Also measured were demographic, illness, work context, and psychological variables. Generalized estimation equations modeled predictors of work transitions over time. Although 63.1% of respondents remained employed throughout the study, work transitions were common (reported by 76.5% of participants). Productivity losses, especially job disruptions such as being unable to take on extra work, were the most frequently reported. Work transitions were related to subsequently making other work transitions, including leaving employment. Age, sex, education, activity limitations, control, depression, and arthritis-work spillover were also associated with work transitions. This study sheds light on a process of diverse employment changes that may occur in the lives of many individuals with arthritis. It emphasizes the interrelationships among work transitions, as well as other factors in predicting work transitions, and it provides insight into work changes that may signal impending difficulties with remaining employed.

  20. Reducing Runoff Loss of Applied Nutrients in Oil Palm Cultivation Using Controlled-Release Fertilizers

    Directory of Open Access Journals (Sweden)

    A. Bah

    2014-01-01

    Full Text Available Controlled-release fertilizers are expected to minimize nutrient loss from crop fields due to their potential to supply plant-available nutrients in synchrony with crop requirements. The evaluation of the efficiency of these fertilizers in tropical oil palm agroecological conditions is not yet fully explored. In this study, a one-year field trial was conducted to determine the impact of fertilization with water soluble conventional mixture and controlled-release fertilizers on runoff loss of nutrients from an immature oil palm field. Soil and nutrient loss were monitored for one year in 2012/2013 under erosion plots of 16 m2 on 10% slope gradient. Mean sediments concentration in runoff amounted to about 6.41 t ha−1. Conventional mixture fertilizer posed the greatest risk of nutrient loss in runoff following fertilization due to elevated nitrogen (6.97%, potassium (13.37%, and magnesium (14.76% as percentage of applied nutrients. In contrast, this risk decreased with the application of controlled-release fertilizers, representing 0.75–2.44% N, 3.55–5.09% K, and 4.35–5.43% Mg loss. Meanwhile, nutrient loss via eroded sediments was minimal compared with loss through runoff. This research demonstrates that the addition of controlled-release fertilizers reduced the runoff risks of nutrient loss possibly due to their slow-release properties.

  1. Measurement of loss of DT fusion products using scintillator detectors in TFTR

    International Nuclear Information System (INIS)

    Darrow, D.S.; Herrmann, H.W.; Johnson, D.W.; Marsala, R.J.; Palladino, R.W.; Zweben, S.J.

    1995-03-01

    A poloidal array of MeV ion loss probes previously used to measure DD fusion product loss has been upgraded to measure the loss of alpha particles from DT plasmas in TFTR. The following improvements to the system have been made in preparation for the use of tritium in TFTR: (1) relocation of detectors to a neutronshielded enclosure in the basement to reduce neutron-induced background signals; (2) replacement of ZnS:Cu (P31) scintillators in the probes with the Y 3 Al 5 0 12 :Ce(P46) variety to minimize damage and assure linearity at the fluxes anticipated from DT plasmas; and (3) shielding of the fiber optic bundles which carry the fight from the probes to the detectors to reduce neutron- and gamma-induced light within them. In addition to the above preparations, the probes have been absolutely calibrated for alpha particles by using the Van de Graaf accelerator at Los Alamos National Laboratory. Alpha particle losses from DT plasmas have been observed, and losses at the detector 901 below the midplane are consistent with first orbit loss

  2. The burden of mortality with costs in productivity loss from occupational cancer in Italy.

    Science.gov (United States)

    Binazzi, Alessandra; Scarselli, Alberto; Marinaccio, Alessandro

    2013-11-01

    The costs of productivity loss due to occupational cancer mortality are rarely investigated. An estimate of occupational cancer deaths in Italy in 2006 and an approximation of the resultant costs from medical and non-medical expenditures together with figures of remuneration lost are provided. Occupational cancer deaths, obtained from the application of the attributable fraction (AF) to mortality data (source: Italian National Institute of Statistics), were used to calculate the Potential Years of Life Lost (PYLLs), the Potential Years of Working Life Lost (PYWLLs) and the costs of the loss of productive life. The health care costs for any cancer was applied to the estimated number of occupational cancer cases to obtain the total cost. Around 8,000-8,500 deaths/year from occupational cancer are estimated to occur in Italy, corresponding to 170,000 PYLLs and more than 16,000 PYWLLs, leading to around 360,000,000 euros in indirect economic loss. Health care costs of occupational cancer are estimated at 456,000,000 euros. Occupational cancer is of major concern in terms of mortality and economic productivity loss. Preventive efforts in evaluating ongoing risks and current exposures are strongly recommended to health policy-makers. Copyright © 2013 Wiley Periodicals, Inc.

  3. Optimal Control Inventory Stochastic With Production Deteriorating

    Science.gov (United States)

    Affandi, Pardi

    2018-01-01

    In this paper, we are using optimal control approach to determine the optimal rate in production. Most of the inventory production models deal with a single item. First build the mathematical models inventory stochastic, in this model we also assume that the items are in the same store. The mathematical model of the problem inventory can be deterministic and stochastic models. In this research will be discussed how to model the stochastic as well as how to solve the inventory model using optimal control techniques. The main tool in the study problems for the necessary optimality conditions in the form of the Pontryagin maximum principle involves the Hamilton function. So we can have the optimal production rate in a production inventory system where items are subject deterioration.

  4. Product Control of Waste Products with New Coating Materials

    International Nuclear Information System (INIS)

    Krumbach, H.; Steinmetz, H.J.; Odoj, R.; Wartenberg, W.; Grunau, H.

    2009-01-01

    In Germany, with the shaft KONRAD a repository for low radioactive waste will be available at the earliest in the year 2013. The previously conditioned radioactive waste has to be suitable for a longer-term interim storage. They have to be treated in a way that they are chemically stable and that their integrity is guaranteed for a long time. That is why the waste product or the container is covered/ coated for special waste such as hygroscopic waste or waste that includes aluminium. The Product Control Group for radioactive waste (PKS) has to proof the suitability of the so-treated waste for the repository KONRAD on behalf of the Federal Office for Radiation Protection (BfS). This has to be done before the delivering. In this context the PKS also assesses the suitability of new coating materials for low radioactive waste products or containers and their correct technical application. The characteristics and the technical application of polyurethane coatings as well as the control of the so-coated waste for the disposal in the shaft KONRAD are described in this poster. The Poster shows the development stages of the coating and the filling. There are also shown the boundary conditions and the investigations of the Product Control Group for the use of the new coating material for radioactive waste. (authors)

  5. Cohort Study of the Success of Controlled Weight Loss Programs for Obese Dogs.

    Science.gov (United States)

    German, A J; Titcomb, J M; Holden, S L; Queau, Y; Morris, P J; Biourge, V

    2015-01-01

    Most weight loss studies in obese dogs assess rate and percentage of weight loss in the first 2-3 months, rather than the likelihood of successfully reaching target weight. To determine outcome of controlled weight loss programs for obese dogs, and to determine the factors associated with successful completion. 143 obese dogs undergoing a controlled weight loss program. This was a cohort study of obese dogs attending a referral weight management clinic. Dogs were studied during their period of weight loss, and cases classified according to outcome as "completed" (reached target weight), "euthanized" (was euthanized before reaching target weight), or "stopped prematurely" (program stopped early for other reasons). Factors associated with successful completion were assessed using simple and multiple logistic regression. 87/143 dogs (61%) completed their weight loss program, 11 [8%] died or were euthanized, and the remaining 45 [32%] stopped prematurely. Reasons for dogs stopping prematurely included inability to contact owner, refusal to comply with weight management advice, or development of another illness. Successful weight loss was positively associated with a faster rate (P obese dogs on a controlled weight loss program reach their target weight. Future studies should better clarify reasons for success in individual cases, and also the role of factors such as activity and behavioral modification. Copyright © 2015 The Authors. Journal of Veterinary Internal Medicine published by Wiley Periodicals, Inc. on behalf of the American College of Veterinary Internal Medicine.

  6. Productivity Losses and Costs in the Less-Common Systemic Autoimmune Rheumatic Diseases.

    Science.gov (United States)

    McCormick, Natalie; Marra, Carlo A; Aviña-Zubieta, J Antonio

    2017-10-30

    We synthesised the literature on productivity losses and costs in the less-common systemic autoimmune rheumatic diseases: Sjogren's syndrome (SjS), systemic sclerosis (SSc), poly/dermatomyositis (PM/DM), and systemic vasculitides (SV). Of 29 studies located, 12 were published 2012 onwards (SSc = 6, SjS = 2, PM/DM = 2, SV = 2). In these, 25% of PM/DM, and 21-26% of SV, were work disabled, 22% of SSc stopped work within 3 years of diagnosis, and annual costs of absenteeism in SSc averaged $12,024 2017 USD. Very few studies reported on costs, presenteeism (working at reduced levels), or unpaid productivity loss. Across multiple systemic autoimmune rheumatic diseases (SARDs), major drivers of lost productivity were generalised items like pain, depression, and fatigue, rather than disease-specific factors. Evidence suggests that work disability is common in SSc and strikes quickly. However, in SSc and other SARDs, more comprehensive estimates are needed, which include absenteeism and presenteeism from paid and unpaid work, costs, and drivers of productivity loss.

  7. Improved Correction of IR Loss in Diffuse Shortwave Measurements: An ARM Value-Added Product

    Energy Technology Data Exchange (ETDEWEB)

    Younkin, K; Long, CN

    2003-11-01

    Simple single black detector pyranometers, such as the Eppley Precision Spectral Pyranometer (PSP) used by the Atmospheric Radiation Measurement (ARM) Program, are known to lose energy via infrared (IR) emission to the sky. This is especially a problem when making clear-sky diffuse shortwave (SW) measurements, which are inherently of low magnitude and suffer the greatest IR loss. Dutton et al. (2001) proposed a technique using information from collocated pyrgeometers to help compensate for this IR loss. The technique uses an empirically derived relationship between the pyrgeometer detector data (and alternatively the detector data plus the difference between the pyrgeometer case and dome temperatures) and the nighttime pyranometer IR loss data. This relationship is then used to apply a correction to the diffuse SW data during daylight hours. We developed an ARM value-added product (VAP) called the SW DIFF CORR 1DUTT VAP to apply the Dutton et al. correction technique to ARM PSP diffuse SW measurements.

  8. Impact of CD4 and CD8 dynamics and viral rebounds on loss of virological control in HIV controllers

    DEFF Research Database (Denmark)

    Chereau, Fanny; Madec, Yoann; Sabin, Caroline

    2017-01-01

    OBJECTIVE: HIV controllers (HICs) spontaneously maintain HIV viral replication at low level without antiretroviral therapy (ART), a small number of whom will eventually lose this ability to control HIV viremia. The objective was to identify factors associated with loss of virological control. MET...

  9. Privacy-preserving smart meter control strategy including energy storage losses

    OpenAIRE

    Avula, Chinni Venkata Ramana R.; Oechtering, Tobias J.; Månsson, Daniel

    2018-01-01

    Privacy-preserving smart meter control strategies proposed in the literature so far make some ideal assumptions such as instantaneous control without delay, lossless energy storage systems etc. In this paper, we present a one-step-ahead predictive control strategy using Bayesian risk to measure and control privacy leakage with an energy storage system. The controller estimates energy state using a three-circuit energy storage model to account for steady-state energy losses. With numerical exp...

  10. Loss minimization control and efficiency determination of electric drives in traction applications

    Energy Technology Data Exchange (ETDEWEB)

    Windisch, Thomas; Hofmann, Wilfried [Technische Univ. Dresden (Germany). Lehrstuhl fuer Elektrische Maschinen und Antriebe

    2012-11-01

    High-power electric drives in automotive traction applications consume a large part of the disposable electric energy. For this reason the energy efficiency of the drives is of great importance for range and fuel consumption of the hybrid electric vehicle. The paper describes two possible drives with different electric motors from a control point of view. The electric power losses in the drive system are determined depending on the operating point of the machine. With these loss characteristics the control of the drives is optimized to produce minimal losses. Finally the energy efficiency for a realistic urban bus drive cycle is calculated to compare the two types. (orig.)

  11. Food irradiation in the control of storage and handling losses in the Philippine onions and garlic

    International Nuclear Information System (INIS)

    Lustre, A.O.; Dianco, A.M.; Vito, F.R.; Manalastas, Z.L.

    1996-01-01

    Information will be provided on the nature and magnitude of the control of postharvest losses in onions and garlic from the application of irradiation. Control of losses is measured in storage and during post storage marketing of the commodities. Information will also be presented on market tests and survey of consumer reaction to irradiated onions. The benefits of irradiation will be discussed in relation to the need to reduce postharvest losses in the food supply and to address consumer concerns over the safety of food due to the use of chemicals. (author)

  12. Coping with loss of ability vs. emotional control and self-esteem in women after mastectomy.

    Science.gov (United States)

    Cieślak, Katarzyna; Golusiński, Wojciech

    2018-01-01

    Does coping with the loss of ability depend on self-esteem and emotional control? Persons who experience losses in two dimensions, i.e. health and ability can deal with the loss by physical therapy, and also by mental and socio-professional rehabilitation. But far and foremost, it is the personality of the person who experiences the loss that matters most. The study included 37 patients after mastectomy. They were divided into two groups according to the time elapsed from cancer diagnosis. The study was conducted using the Questionnaire on Coping With Ability Loss (P. Wolski), Self-Esteem Loss (M. Rosenberg,) and the Courtauld Emotional Control Scale - CECS. In Group I, the higher level of acceptance in the QCAL test, the higher self-esteem. The more depression experienced by individuals, the lower is their level of self-esteem or the less depression experienced, the higher the self-esteem. In Group II, the higher the level of depression, the lower the level of anger. The greater the struggle, the lower level of anger. The lower the level of depression and struggle, the higher the level of emotion control. Women diagnosed no longer than five years back do not differ from those diagnosed further back in terms of copying with the loss of ability, self-esteem and emotional control.

  13. Reading Intervention to Improve Narrative Production, Narrative Comprehension, and Motivation and Interest of Children with Hearing Loss

    Science.gov (United States)

    Pakulski, Lori A.; Kaderavek, Joan N.

    2012-01-01

    This study examined the effects of a reading intervention on narrative production, narrative comprehension, and reading motivation interest in children with hearing loss. Seven school children between the ages of 9 and 11 were paired with younger "reading buddies" (without hearing loss). The children with hearing loss read storybooks to…

  14. 10 CFR 74.11 - Reports of loss or theft or attempted theft or unauthorized production of special nuclear material.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 2 2010-01-01 2010-01-01 false Reports of loss or theft or attempted theft or... Requirements § 74.11 Reports of loss or theft or attempted theft or unauthorized production of special nuclear... plutonium shall notify the NRC Operations Center within 1 hour of discovery of any loss or theft or other...

  15. Social costs of loss in productivity-related absenteeism in Poland

    Directory of Open Access Journals (Sweden)

    Agnieszka Genowska

    2017-10-01

    Full Text Available Objectives: The aim of this study was to estimate indirect costs associated with losses in productivity due to sickness absence among registered workers in Poland. Material and Methods: Data on sick leave durations in 2013 was obtained from the Social Insurance Institution (SII (Zakład Ubezpieczeń Społecznych – ZUS. Based on the number of assumptions, this data was used for calculating absence durations. The costs of lost productivity were estimated on the basis of the measure of gross value added. Results: Estimated losses in productivity due to absenteeism in 2013 together accounted for 4.33% of gross domestic product (GDP (17.09 billion euro. In the female population, the total value of losses amounted to 9.66 billion euro, but excluding the costs of pregnancy, childbirth, and puerperium (2.96 billion euro, it was 6.7 billion euro. In the male population, the loss amounted to 7.43 billion euro. The highest overall costs of sickness absence based on age were found in the age group of 30–39 years (5.14 billion euro, including pregnancy, childbirth, and puerperium – 1.474 billion euro; respiratory diseases – 0.632 billion euro, injuries and poisonings – 0.62 billion euro. In the group of people aged > 40 years, the highest cost was generated by bone-muscular diseases (1.553 billion euro and injuries and poisoning (1.251 billion euro. Higher losses in the productivity of women in addition to pregnancy, childbirth, and puerperium were due to mental and behavioral disorders (0.71 billion euro, diseases of the genitourinary system (0.38 billion euro, and neoplasms (0.35 billion euro. At the same time, in men, compared to women, we observed higher losses due to injuries and poisoning (1.65 billion euro, and diseases of musculoskeletal (1.26 billion euro, nervous (0.79 billion euro, circulatory (0.65 billion euro, and digestive (0.41 billion euro systems. Conclusions: Improvement and further development of effective strategies for

  16. Social costs of loss in productivity-related absenteeism in Poland.

    Science.gov (United States)

    Genowska, Agnieszka; Fryc, Justyna; Pinkas, Jarosław; Jamiołkowski, Jacek; Szafraniec, Krystyna; Szpak, Andrzej; Bojar, Iwona

    2017-10-06

    The aim of this study was to estimate indirect costs associated with losses in productivity due to sickness absence among registered workers in Poland. Data on sick leave durations in 2013 was obtained from the Social Insurance Institution (SII) (Zakład Ubezpieczeń Społecznych - ZUS). Based on the number of assumptions, this data was used for calculating absence durations. The costs of lost productivity were estimated on the basis of the measure of gross value added. Estimated losses in productivity due to absenteeism in 2013 together accounted for 4.33% of gross domestic product (GDP) (17.09 billion euro). In the female population, the total value of losses amounted to 9.66 billion euro, but excluding the costs of pregnancy, childbirth, and puerperium (2.96 billion euro), it was 6.7 billion euro. In the male population, the loss amounted to 7.43 billion euro. The highest overall costs of sickness absence based on age were found in the age group of 30-39 years (5.14 billion euro, including pregnancy, childbirth, and puerperium - 1.474 billion euro; respiratory diseases - 0.632 billion euro, injuries and poisonings - 0.62 billion euro). In the group of people aged > 40 years, the highest cost was generated by bone-muscular diseases (1.553 billion euro) and injuries and poisoning (1.251 billion euro). Higher losses in the productivity of women in addition to pregnancy, childbirth, and puerperium were due to mental and behavioral disorders (0.71 billion euro), diseases of the genitourinary system (0.38 billion euro), and neoplasms (0.35 billion euro). At the same time, in men, compared to women, we observed higher losses due to injuries and poisoning (1.65 billion euro), and diseases of musculoskeletal (1.26 billion euro), nervous (0.79 billion euro), circulatory (0.65 billion euro), and digestive (0.41 billion euro) systems. Improvement and further development of effective strategies for prevention of complications of pregnancy and chronic diseases in the

  17. DUST PRODUCTION AND MASS LOSS IN THE GALACTIC GLOBULAR CLUSTER NGC 362

    International Nuclear Information System (INIS)

    Boyer, Martha L.; Gordon, Karl D.; Meixner, Margaret; Sewilo, Marta; Shiao, Bernie; Whitney, Barbara; McDonald, Iain; Van Loon, Jacco Th.; Oliveira, Joana M.; Babler, Brian; Bracker, Steve; Meade, Marilyn; Block, Miwa; Engelbracht, Charles; Misselt, Karl; Hora, Joe; Indebetouw, Remy

    2009-01-01

    We investigate dust production and stellar mass loss in the Galactic globular cluster NGC 362. Due to its close proximity to the Small Magellanic Cloud (SMC), NGC 362 was imaged with the Infrared Array Camera and Multiband Imaging Photometer cameras onboard the Spitzer Space Telescope as part of the Surveying the Agents of Galaxy Evolution (SAGE-SMC) Spitzer Legacy program. We detect several cluster members near the tip of the red giant branch (RGB) that exhibit infrared excesses indicative of circumstellar dust and find that dust is not present in measurable quantities in stars below the tip of the RGB. We modeled the spectral energy distribution (SED) of the stars with the strongest IR excess and find a total cluster dust mass-loss rate of 3.0 +2.0 -1.2 x 10 -9 M sun yr -1 , corresponding to a gas mass-loss rate of 8.6 +5.6 -3.4 x 10 -6 M sun yr -1 , assuming [Fe/H] =-1.16. This mass loss is in addition to any dustless mass loss that is certainly occurring within the cluster. The two most extreme stars, variables V2 and V16, contribute up to 45% of the total cluster dust-traced mass loss. The SEDs of the more moderate stars indicate the presence of silicate dust, as expected for low-mass, low-metallicity stars. Surprisingly, the SED shapes of the stars with the strongest mass-loss rates appear to require the presence of amorphous carbon dust, possibly in combination with silicate dust, despite their oxygen-rich nature. These results corroborate our previous findings in ω Centauri.

  18. [Health risks from pest control products].

    Science.gov (United States)

    Pieper, C; Holthenrich, D; Schneider, H

    2014-05-01

    According to European biocide legislation, pest control products require assessment and authorization by the responsible national or European authorities. Biocidal products can only be authorized if they have no unacceptable effects on human health. The health risk assessment performed for authorization comprises (a) the derivation of reference values for the active substances and substances of concern contained in the biocidal product and (b) an exposure assessment. These parameters are required for risk characterization. No unacceptable health risks are expected if the determined exposure is less than the relevant reference value. In addition, the toxicological information is used for classification of the biocidal product. The assessment may, where necessary, result in specific conditions for use or other restrictions aimed at minimizing risk. The risk to human health from pest control products is mainly based on the toxicological properties of their active substances. Commonly, the coformulants used in pest control products are of less concern than the active substances (e.g., food ingredients and animal feed products). For example, most rodenticides belong to the group of anticoagulants, which are also effective in humans. Regarding intoxications through insecticides, the group of pyrethroids is of particular importance. Fumigants containing metal phosphides, hydrogen cyanide, or sulfuryl difluoride are particularly toxic. This toxicity is linked to the high acute inhalation toxicity of the gaseous active substances themselves or, in the case of phosphides, of the released gas phosphane. The aim of health risk assessment for the authorization of biocidal products is to ensure their safe application for users and all other persons involved, assuming an adequate and label-compliant use.

  19. Interview and questionnaire guide: Quantification of food losses and waste in primary production

    DEFF Research Database (Denmark)

    Svanes, Erik; Hartikainen, Hanna; Mogensen, Lisbeth

    production in the Nordic countries. Other aims were to estimate the amount of side flow and to gain knowledge about the reasons behind it, how it can be reduced, how it is treated and how it can be better utilized.This guide contains a catalogue of questions that may be used for interviews and questionnaires...... with primary producers and other stakeholders within primary production. It also contains the justification behind the questions and some tips on how to conduct interviews.......This interview guide was developed within the Nordic project “Food losses and waste in primary production” (Franke et al. 2016). One of the main purposes of the project was to test research methods for the quantification of food losses and waste (in the project called 'side flow') from primary...

  20. Defect production and subsequent effects induced by electronic energy loss of swift heavy ion

    International Nuclear Information System (INIS)

    Hou Mingdong; Liu Jie; Sun Youmei; Yin Jingmin; Yao Huijun; Duan Jinglai; Mo Dan; Zhang Ling; Chen Yanfeng; Chinese Academy of Sciences, Beijing

    2008-01-01

    Swift heavy ion in matter is one of forfront fields of nuclear physics in the world. A series of new phenomena were discovered in recent years. The history and sta- tus on the development of this field were reviewed. Electronic energy loss effects induced by swift heavy ion irradiation, such as defect production and evolution, ion latent track formation, phase transformation and anisotropy plastic deformation were introduced emphatically. A trend of future investigation was explored. (authors)

  1. Using routinely collected data to augment the management of health and productivity loss.

    Science.gov (United States)

    Allen, Harris

    2008-06-01

    To test models of productivity loss developed from data collected using a health risk appraisal (HRA) designed to examine health in the broader context of work, mental well-being, and the demands of organizational and family life. Secondary analyses of a data extract provided by the HRA's developer. These analyses focused on 17,821 respondents whose version of the HRA included the Work Limitation Questionnaire. Structural equation techniques were used to estimate a series of models featuring 38 measures and a four-step hypothesized sequence. The tests confirmed the presence of two distinct but interrelated components driven by health issues--Presenteeism (impaired performance at work) and Absenteeism (time away from work)--posited to describe productivity loss. The tests also documented the predictive power of eight categories of measures in accounting for the phenomenon. Preeminent among these predictors was a heterogeneous set of measures encompassing current and future aspects of Health. But measures from seven other categories--Work-Life Balance, Personal Life Impact, Stress, Financial Concerns, and Job, Employee, and Company Characteristics--also made significant contributions. Combined, their unique contribution was five times that of Health alone. This case study illustrates how data routinely captured via an instrument that is an example of a class of self-reports surveys increasingly being used to address a variety of workforce issues can be tapped to describe and predict productivity loss. The results confirm the key role that Health plays in determining the phenomenon. They also affirm the advisability of incorporating into interventions undertaken to reduce productivity loss an orientation that is paralleled by the recent emergence of the use of quality of life measures in provider settings. This orientation is predicated on the need to take into better account other contextual factors that exert considerable influences through as well as above and

  2. Internal transport control in pot plant production

    NARCIS (Netherlands)

    Annevelink, E.

    1999-01-01

    Drawing up internal transport schedules in pot plant production is a very complex task. Scheduling internal transport at the operational level and providing control on a day-to-day or even hour-to-hour basis in particular requires a new approach. A hierarchical planning approach based on

  3. Radioactive demonstration of DWPF product control strategy

    International Nuclear Information System (INIS)

    Andrews, M.K.; Bibler, N.E.

    1992-01-01

    The effectiveness of the product and process control strategies that will be utilized by the Defense Waste Processing Facility (DWPF) was demonstrated during a campaign in the Shielded Cells Facility (SCF) of the Savannah River Technology Center (SRTC). The remotely operated process included the preparation of the melter feed, vitrification in a slurry-fed 1/100th scale melter and analysis of the glass product both for its composition and durability. The campaign processed approximately 10 kg (on a dry basis) of radioactive sludge from Tank 51. This sludge is representative of the first batch of sludge that will be sent to the DWPF for immobilization into borosilicate glass. Additions to the sludge were made based on calculations using the Product Composition Control System (PCCS). Analysis of the glass produced during the campaign showed that a durable glass was produced with a composition similar to that predicted using the PCCS

  4. Operation and Control of Enzymatic Biodiesel Production

    DEFF Research Database (Denmark)

    Price, Jason Anthony; Huusom, Jakob Kjøbsted; Nordblad, Mathias

    This work explores the control of biodiesel production via an enzymatic catalyst. The process involves the transesterification of oils/fats with an alcohol (usually methanol or ethanol), using enzymatic catalysts to generate mono-alkyl esters (the basis of biodiesel) and glycerol as by......-product. Current literature indicates that enzymatic processing of oils and fats to produce biodiesel is technically feasible and developments in immobilization technology indicate that enzyme catalysts can become cost effective compared to chemical processing. However, with very few exceptions, enzyme technology...... is not currently used in commercial-scale biodiesel production. This is mainly due to non-optimized process designs, which do not use the full potential of the catalysts in a cost-efficient way. Furthermore is it unclear what process variables need to be monitored and controlled to ensure optimal economics...

  5. The willingness to pay of parties to traffic accidents for loss of productivity and consolation compensation.

    Science.gov (United States)

    Jou, Rong-Chang; Chen, Tzu-Ying

    2015-12-01

    In this study, willingness to pay (WTP) for loss of productivity and consolation compensation by parties to traffic accidents is investigated using the Tobit model. In addition, WTP is compared to compensation determined by Taiwanese courts. The modelling results showed that variables such as education, average individual monthly income, traffic accident history, past experience of severe traffic accident injuries, the number of working days lost due to a traffic accident, past experience of accepting compensation for traffic accident-caused productivity loss and past experience of accepting consolation compensation caused by traffic accidents have a positive impact on WTP. In addition, average WTP for these two accident costs were obtained. We found that parties to traffic accidents were willing to pay more than 90% of the compensation determined by the court in the scenario of minor and moderate injuries. Parties were willing to pay approximately 80% of the compensation determined by the court for severe injuries, disability and fatality. Therefore, related agencies can use our study findings as the basis for determining the compensation that parties should pay for productivity losses caused by traffic accidents of different types. Copyright © 2015 Elsevier Ltd. All rights reserved.

  6. Valuing productivity loss due to absenteeism: firm-level evidence from a Canadian linked employer-employee survey

    OpenAIRE

    Zhang, Wei; Sun, Huiying; Woodcock, Simon; Anis, Aslam H.

    2017-01-01

    In health economic evaluation studies, to value productivity loss due to absenteeism, existing methods use wages as a proxy value for marginal productivity. This study is the first to test the equality between wage and marginal productivity losses due to absenteeism separately for team workers and non-team workers. Our estimates are based on linked employer-employee data from Canada. Results indicate that team workers are more productive and earn higher wages than non-team workers. However, t...

  7. Capture from pair production as a beam loss mechanism for heavy ions at RHIC

    International Nuclear Information System (INIS)

    Feinberg, B.; Belkacem, A.; Claytor, N.; Dinneen, T.; Gould, H.

    1997-05-01

    Electron capture from electron-positron pair production is predicted to be a major source of beam loss for the heaviest ions at RHIC. Achieving the highest luminosity thus requires an understanding of the capture process. The authors report measurements of this process at Brookhaven National Laboratory's AGS using 10.8 GeV/nucleon Au 79+ projectiles on Au targets. Capture from pair production is a process in which the very high electromagnetic field involved in the collision of two relativistic heavy ions results in the production of an electron-positron pair with the capture of the electron by one of the ions. There are many theoretical papers published on capture from pair production with discrepancies between predicted cross sections. The experimental results are compared to theory and to previous experiments at 1 GeV/nucleon. The implications of extrapolations to RHIC energies are presented

  8. Productivity losses and public finance burden attributable to breast cancer in Poland, 2010-2014.

    Science.gov (United States)

    Łyszczarz, Błażej; Nojszewska, Ewelina

    2017-10-10

    Apart from the health and social burden of the disease, breast cancer (BC) has important economic implications for the sick, health system and whole economy. There has been a growing interest in the economic aspects of breast cancer and analyses of the disease costs seem to be the most explored topic. However, the results from these studies are hardly comparable. With this study we aim to contribute to the field by providing estimates of productivity losses and public finance burden attributable to BC in Poland. We used retrospective prevalence-based top-down approach to estimate the productivity losses (indirect costs) of BC in Poland in the period 2010-2014. Human capital method (HCM) and societal perspective were used to estimate the costs of: absenteeism of the sick and caregivers, presenteeism of the sick and caregivers, disability, and premature mortality. We also used figures illustrating public finance burden attributable to the disease. Deterministic sensitivity analysis was performed to assess the stability of the estimates. A variety of data sources were used with the social insurance system and Polish National Cancer Registry being the most important ones. Productivity losses associated with BC in Poland were €583.7 million in 2010 and they increased to €699.7 million in 2014. Throughout the period these costs accounted for 0.162-0.171% of GDP, an equivalent of 62,531-65,816 per capita GDP. Losses attributable to disability and premature mortality proved to be the major cost drivers with 27.6%-30.6% and 22.0%-24.6% of the total costs respectively. The costs due to caregivers' presenteeism were negligible (0.1% of total costs). Public finance expenditure for social insurance benefits to BC sufferers ranged from €50.2 million (2010) to €56.6 million (2014), an equivalent of 0.72-0.79% of expenditures for all diseases. Potential losses in public finance revenues accounted for €173.9 million in 2010 and €211.0 million in 2014. Sensitivity

  9. Low eddy loss axial hybrid magnetic bearing with gimballing control ability for momentum flywheel

    International Nuclear Information System (INIS)

    Tang, Jiqiang; Sun, Jinji; Fang, Jiancheng; Shuzhi Sam, Ge

    2013-01-01

    For a magnetically suspended momentum flywheel (MSMF), the spinning rotor can be tilted by a pair of the presented axial hybrid magnetic bearing (AHMB) with eight poles and rotates around the radial axes to generate a large torque to maneuver the spacecraft. To improve the control performance and gimballing control ability of the AHMB, characteristics such as magnetic suspension force, angular stiffness and tilting momentum are researched. These segmented stator poles cause the magnetic density in the thrust rotor plate to be uneven unavoidably and the rotational loss is large at high speed, but we optimized the stator poles configuration and caused the thrust rotor plate formed by bulk DT4C and laminated material to make the magnetic density in the thrust rotor plate change less and be smoother. Laminated material such as 1J50 film with a thickness of 0.1 mm can make the variation of the magnetic density in DT4C become very small and the eddy loss of it be negligible, but the stress produced in the “O” shape stacks by reeling has a bad effect on its power loss. Nanocrystalline can reduce eddy losses and is not affected by the reeling process. Based on the AHBM consisting of the stator with eight improved poles and the presented thrust rotor plate with DT4 and nanocrystalline, the rotational loss of 5-DOF magnetically suspended momentum flywheel with angular momentum of 15 N m s at 5000 rpm has reduced from 23.4 W to 3.2 W, which proved that this AHMB has low eddy loss for the gimballing control ability. - Highlights: ► Control methods of rotor driven by AHMBs and their characteristics are researched. ► Optimized stator and rotor of AHMB reduce its eddy losses greatly. ► Presented the factors affecting the eddy losses of AHMBs. ► The good performances of AHMB with low eddy loss are proved by experiments.

  10. A Projection of Automated Book Production Control

    Directory of Open Access Journals (Sweden)

    Mario Barisic

    2006-12-01

    Full Text Available The paper elaborates on the recommendation of systematic introducing of XML technologies as a standard and integral factor in publishing and graphic business activities and as a further improvement of the existing PostScript graphic production platform. Procedures are proposed for applying norm setting in respect to production processes through related connections organized databases under XML technology in a hierarchical way, as well as a book production norm setting system. The proposal for work processes automation in the domain of printing business control is elaborated under the CIP4-JDF automating system. Operation results are used as guidelines for setting the elements of automated business operations in the book production domain, with integrated elements of new technologies, compatible with global trends.

  11. A comparison of average wages with age-specific wages for assessing indirect productivity losses : Analytic simplicity versus analytic precision

    NARCIS (Netherlands)

    Connolly, Mark P; Tashjian, Cole; Kotsopoulos, Nikolaos; Bhatt, Aomesh; Postma, Maarten J

    Objectives: Numerous approaches are used to estimate indirect productivity losses using various wage estimates applied to poor health in working aged adults. Considering the different wage estimation approaches observed in the published literature, we sought to assess variation in productivity loss

  12. Loss of productivity due to neck/shoulder symptoms and hand/arm symptoms: Results from the PROMO-study

    NARCIS (Netherlands)

    Heuvel, S.G. van den; IJmker, S.; Blatter, B.M.; Korte, E.M. de

    2007-01-01

    Introduction: The objective of the present study is to describe the extent of productivity loss among computer workers with neck/shoulder symptoms and hand/arm symptoms, and to examine associations between pain intensity, various physical and psychosocial factors and productivity loss in computer

  13. Development and application of a decision support tool for reduction of product losses in the food-processing industry

    NARCIS (Netherlands)

    Akkerman, Renzo; van Donk, Dirk Pieter

    2008-01-01

    In food-processing industries, reduction of product losses is important for improving profitability and sustainability. This paper presents a decision support tool for analyzing the effects of planning decisions on the amount of product losses in the food-processing industry. We created a research

  14. History of weight control attempts among adolescent girls with loss of control eating.

    Science.gov (United States)

    Vannucci, Anna; Shomaker, Lauren B; Field, Sara E; Sbrocco, Tracy; Stephens, Mark; Kozlosky, Merel; Reynolds, James C; Yanovski, Jack A; Tanofsky-Kraff, Marian

    2014-05-01

    Loss of control (LOC) eating and a weight control attempt (WCA) history during adolescence are important behavioral risk factors for eating disorders and obesity. The current study investigated the significance of the presence of a WCA history among adolescent girls with LOC eating. Participants were 114 obesity-prevention-seeking 12-17-year-old (M = 14.5, SD = 1.7 years) girls who were between the 75th and 97th body mass index (BMI) percentile (BMI-z: M = 1.5, SD = 0.3) and reported LOC eating episodes during the previous month (M = 4.0, SD = 4.9 episodes; Median = 2.0). Measures included the Eating Disorder Examination to assess LOC eating, eating pathology, and WCA history, and self-report questionnaires for symptoms of general psychopathology. Eating behavior was observed during a laboratory meal designed to capture a LOC eating episode. 67.5% reported a WCA history. As compared to girls without a WCA history (no-WCA), those with a WCA history (WCA) had greater disordered eating attitudes and depressive symptoms (ps frequency (ps > .10). During the laboratory meal, WCA consumed less energy from snack-type foods than no-WCA (M = 245.0, SD = 156.1 vs. M = 341.6, SD = 192.3 kcal; p = .01). Reported WCAs are highly prevalent and are associated with greater psychopathology symptoms among adolescent girls with LOC eating. Prospective data are needed to determine whether these overlapping risk behaviors confer differential vulnerability for developing eating disorders and obesity. PsycINFO Database Record (c) 2014 APA, all rights reserved.

  15. Mechanics of human voice production and control.

    Science.gov (United States)

    Zhang, Zhaoyan

    2016-10-01

    As the primary means of communication, voice plays an important role in daily life. Voice also conveys personal information such as social status, personal traits, and the emotional state of the speaker. Mechanically, voice production involves complex fluid-structure interaction within the glottis and its control by laryngeal muscle activation. An important goal of voice research is to establish a causal theory linking voice physiology and biomechanics to how speakers use and control voice to communicate meaning and personal information. Establishing such a causal theory has important implications for clinical voice management, voice training, and many speech technology applications. This paper provides a review of voice physiology and biomechanics, the physics of vocal fold vibration and sound production, and laryngeal muscular control of the fundamental frequency of voice, vocal intensity, and voice quality. Current efforts to develop mechanical and computational models of voice production are also critically reviewed. Finally, issues and future challenges in developing a causal theory of voice production and perception are discussed.

  16. Radioactive demonstration of DWPF product control strategy

    International Nuclear Information System (INIS)

    Andrews, M.K.; Bibler, N.E.

    1994-01-01

    The Defense Waste Processing Facility at the Savannah River Site (SRS) will vitrify high-level nuclear waste into borosilicate glass. The waste will be mixed with properly formulated glass-making frit and fed to a melter at 1150 degrees C. Process reliability and product quality are ensured by proper control of the melter feed composition. The effectiveness of the product and process control strategies that will be utilized by the Defense Waste Processing Facility (DWPF) was demonstrated during a campaign in the Shielded Cells Facility of the Savannah River Technology Center (SRTC). The remotely operated process included the preparation of the melter feed, vitrification in a slurry-fed 1/100th scale melter an analysis of the glass product both for its composition an durability. The campaign processed approximately 10 kg (on a dry basis) of radioactive sludge from Tank 51. This sludge is representative of the first batch of sludge that will be sent to the DWPF for immobilization into borosilicate glass. Additions to the sludge were made based on calculations using the Product Composition Control System (PCCS). Analysis of the glass produced during the campaign showed that a durable glass was produced with a composition very close to that predicted using the PCCS. 10 refs., 4 tabs

  17. A Hybrid Optimization Method for Reactive Power and Voltage Control Considering Power Loss Minimization

    DEFF Research Database (Denmark)

    Liu, Chengxi; Qin, Nan; Bak, Claus Leth

    2015-01-01

    This paper proposes a hybrid optimization method to optimally control the voltage and reactive power with minimum power loss in transmission grid. This approach is used for the Danish automatic voltage control (AVC) system which is typically a non-linear non-convex problem mixed with both...

  18. Energy utilization, carbon dioxide emission, and exergy loss in flavored yogurt production process

    International Nuclear Information System (INIS)

    Sorgüven, Esra; Özilgen, Mustafa

    2012-01-01

    This paper investigates the impact of food production processes on the environment in terms of energy and exergy utilization and carbon dioxide emission. There are three different energy utilization mechanisms in food production: Utilization of solar energy by plants to produce agricultural goods; feed consumption by herbivores to produce meat and milk; fossil fuel consumption by industrial processes to perform mixing, cooling, heating, etc. Production of strawberry-flavored yogurt, which involves these three mechanisms, is investigated here thermodynamically. Analysis starts with the cultivation of the ingredients and ends with the transfer of the final product to the market. The results show that 53% of the total exergy loss occurs during the milk production and 80% of the total work input is consumed during the plain yogurt making. The cumulative degree of perfection is 3.6% for the strawberry-flavored yogurt. This value can rise up to 4.6%, if renewable energy resources like hydropower and algal biodiesel are employed instead of fossil fuels. This paper points the direction for the development of new technology in food processing to decrease waste of energy and carbon dioxide accumulation in the atmosphere. -- Highlights: ► Energy and exergy utilization and carbon dioxide emission during strawberry-flavored yogurt production. ► Cumulative degree of perfection of strawberry-flavored yogurt is 3.6%. ► 53% of the total exergy loss occurs during the milk production. ► 80% of the total work input is consumed during the plain yogurt making.

  19. Control of dust production in ITER

    International Nuclear Information System (INIS)

    Rodriguez-Rodrigo, L.; Ciattaglia, S.; Elbez-Uzan, J.

    2006-01-01

    In the last years dust has been observed in a number of fusion devices and is being studied more in detail for understanding in particular the physical phenomena related to its formation, its composition, physical and chemical characteristics, and the amount of produced dust. The extrapolation of dust formation to ITER predicts (with large error bars), a large mass of dust production with a scattered size distribution. To evaluate the impact of dust on safety, assumptions have also been made on radionuclide inventory, and mobility in off-normal events, as well as any postulated contributions the dust may make to effluents or accidental releases. Solid activation products in structures are generally not readily mobilisable in incidental and accidental situations, so that activated dust, tritium and activated corrosions products are the important in-vessel source terms in postulated scenarios that assume a mobilisation and release of some fraction of this inventory. Such a release would require the simultaneous leak or bypass of several robust confinement barriers. Further concerns for dust may be the potential for chemical reactions between dust and coolant in the event of an in-vessel leak, and the theoretical possibility of a dust explosion, either of which could in principle cause a pressure rise that challenges one or more of the confinement barriers. Although these hazards can - and will - be controlled by other measures in the ITER design, application of the principle of Defence in Depth dictates that the dust inventory should also be minimised and controlled to prevent the potential hazard. A well-coordinated R-and-D programme is required to support this dust production control. This document provides from the safety point of view, an overview of existing data given in '' Dossier d'Options de Surete '', the first safety report presented in 2001 to the French Safety Authorities, and ITER documents; it also gathers information on status of studies on activated

  20. Control of Refrigeration Systems for Trade-off between Energy Consumption and Food Quality Loss

    DEFF Research Database (Denmark)

    Cai, Junping

    In supermarkets, control strategies determine both the energy consumption of refrigeration systems and the quality loss of refrigerated foodstuffs. The question is, what can be done to optimize the balance between quality loss and energy consumption? This thesis tries to answer this question...... by applying two main optimization strategies to traditional refrigeration systems. The first strategy is a new defrost-on-demand scheme, which based on an objective function between quality loss and energy consumption, continuously seeks an optimal time interval for defrosting in dynamic situation. The second...... strategy is through utilization of the thermal mass of the refrigerated foodstuffs, the day-night temperature variation and the capacity control of the compressor, to realize a trade-off between system energy consumption and food quality loss....

  1. Particularities of Profit and Loss Account Audit and the Production Process in Constructions

    Directory of Open Access Journals (Sweden)

    Marian Grigore

    2016-01-01

    The financial audit of the profit and loss account is subsequent and implies a scheduledverification after the end of the financial year and submission of yearly statements to financialadministration, as a confirmation that this activity was efficient, did not result in frauds. It thusfollows that there is a direct relationship between the initial control proposed at the beginning ofthe building project and the final verification materialised through the annual financial audit.

  2. Investigation of some copolymers based on acrylic salts as circulation loss control agents

    Directory of Open Access Journals (Sweden)

    Ahmed Mohamed Alsabagh

    2013-12-01

    The prepared copolymers were investigated as loss circulation control materials by measuring different filtration parameters such as; spurt loss, fluid loss and permeability plugging tester value according to the American Petroleum Institute (API standard. From the obtained data, it was found that the 0.6% from the poly[PA-co-AM](0.4:0.6 exhibited the best results of the filtration parameters among the other copolymers. At the same time all the studied copolymers enhanced the rheological properties of the drilling mud. These results were discussed on the light of the swelling capacity of the copolymers.

  3. Motivation by potential gains and losses affects control processes via different mechanisms in the attentional network.

    Science.gov (United States)

    Paschke, Lena M; Walter, Henrik; Steimke, Rosa; Ludwig, Vera U; Gaschler, Robert; Schubert, Torsten; Stelzel, Christine

    2015-05-01

    Attentional control in demanding cognitive tasks can be improved by manipulating the motivational state. Motivation to obtain gains and motivation to avoid losses both usually result in faster reaction times and stronger activation in relevant brain areas such as the prefrontal cortex, but little is known about differences in the underlying neurocognitive mechanisms of these types of motivation in an attentional control context. In the present functional magnetic resonance imaging (fMRI) study, we tested whether potential gain and loss as motivating incentives lead to overlapping or distinct neural effects in the attentional network, and whether one of these conditions is more effective than the other. A Flanker task with word stimuli as targets and distracters was performed by 115 healthy participants. Using a mixed blocked and event-related design allowed us to investigate transient and sustained motivation-related effects. Participants could either gain money (potential gain) or avoid losing money (potential loss) in different task blocks. Participants showed a congruency effect with increased reaction times for incongruent compared to congruent trials. Potential gain led to generally faster responses compared to the neutral condition and to stronger improvements than potential loss. Potential loss also led to shorter response times compared to the neutral condition, but participants improved mainly during incongruent and not during congruent trials. The event-related fMRI data revealed a main effect of congruency with increased activity in the left inferior frontal gyrus (IFG) and inferior frontal junction area (IFJ), the pre-supplementary motor area (pre-SMA), bilateral insula, intraparietal sulcus (IPS) and visual word form area (VWFA). While potential gain led to increased activity in a cluster of the IFJ and the VWFA only during incongruent trials, potential loss was linked to activity increases in these regions during incongruent and congruent trials. The

  4. Valuing productivity loss due to absenteeism: firm-level evidence from a Canadian linked employer-employee survey.

    Science.gov (United States)

    Zhang, Wei; Sun, Huiying; Woodcock, Simon; Anis, Aslam H

    2017-12-01

    In health economic evaluation studies, to value productivity loss due to absenteeism, existing methods use wages as a proxy value for marginal productivity. This study is the first to test the equality between wage and marginal productivity losses due to absenteeism separately for team workers and non-team workers. Our estimates are based on linked employer-employee data from Canada. Results indicate that team workers are more productive and earn higher wages than non-team workers. However, the productivity gap between these two groups is considerably larger than the wage gap. In small firms, employee absenteeism results in lower productivity and wages, and the marginal productivity loss due to team worker absenteeism is significantly higher than the wage loss. No similar wage-productivity gap exists for large firms. Our findings suggest that productivity loss or gain is most likely to be underestimated when valued according to wages for team workers. The findings help to value the burden of illness-related absenteeism. This is important for economic evaluations that seek to measure the productivity gain or loss of a health care technology or intervention, which in turn can impact policy makers' funding decisions.

  5. Asthma and obesity: does weight loss improve asthma control? a systematic review

    Directory of Open Access Journals (Sweden)

    Juel CTB

    2012-06-01

    Full Text Available Caroline Trunk-Black Juel,1 Zarqa Ali,1 Lisbeth Nilas,2 Charlotte Suppli Ulrik11Respiratory Section, Internal Medicine Unit, 2Department of Obstetrics and Gynaecology, Hvidovre Hospital and University of Copenhagen, Hvidovre, DenmarkAim and methods: Obesity is a major health problem, and obesity is associated with a high incidence of asthma and poor asthma control. The aim of the present paper is to systematically review the current knowledge of the effect on overall asthma control of weight reduction in overweight and obese adults with asthma.Results: Weight loss in obese individuals with doctor-diagnosed asthma is associated with a 48%–100% remission of asthma symptoms and use of asthma medication. Published studies, furthermore, reveal that weight loss in obese asthmatics improves asthma control, and that especially surgically induced weight loss results in significant improvements in asthma severity, use of asthma medication, dyspnoea, exercise tolerance, and acute exacerbations, including hospitalizations due to asthma. Furthermore, weight loss in obese asthmatics is associated with improvements in level of lung function and airway responsiveness to inhaled methacholine, whereas no significant improvements have been observed in exhaled nitric oxide or other markers of eosinophilic airway inflammation.Conclusion: Overweight and obese adults with asthma experience a high symptomatic remission rate and significant improvements in asthma control, including objective measures of disease activity, after weight loss. Although these positive effects of weight loss on asthma-related health outcomes seem not to be accompanied by remission or improvements in markers of eosinophilic airway inflammation, it has potentially important implications for the future burden of asthma.Keywords: asthma, weight loss, diet, bariatric surgery, asthma control

  6. Reaction rate and energy-loss rate for photopair production by relativistic nuclei

    Science.gov (United States)

    Chodorowski, Michal J.; Zdziarski, Andrzej A.; Sikora, Marek

    1992-01-01

    The process of e(+/-) pair production by relativistic nuclei on ambient photons is considered. The process is important for cosmic-ray nuclei in interstellar and intergalactic space as well as in galactic and extragalactic compact objects. The rate of this process is given by an integral of the cross section over the photon angular and energy distribution. In the case of isotropic photons, the angular integration is performed to provide an expression for the rate at given photon energy in the nucleus rest frame. The total rate then becomes a single integral of that rate over the photon energy distribution. Formulas are also given for the fractional energy loss of a relativistic nucleus colliding with a photon of a given energy in the rest frame. The nucleus energy-loss rate is integrated over the photon angular distribution in the case of isotropic photons, and simple fits are provided.

  7. DUST PRODUCTION AND MASS LOSS IN THE GALACTIC GLOBULAR CLUSTER 47 TUCANAE

    International Nuclear Information System (INIS)

    McDonald, I.; Zijlstra, A. A.; Boyer, M. L.; Van Loon, J. Th.

    2011-01-01

    Dust production among post-main-sequence stars is investigated in the Galactic globular cluster 47 Tucanae (NGC 104) based on infrared photometry and spectroscopy. We identify metallic iron grains as the probable dominant opacity source in these winds. Typical evolutionary timescales of asymptotic giant branch stars suggest the mass-loss rates we report are too high. We suggest that this is because the iron grains are small or elongated and/or that iron condenses more efficiently than at solar metallicity. Comparison to other works suggests metallic iron is observed to be more prevalent toward lower metallicities. The reasons for this are explored, but remain unclear. Meanwhile, the luminosity at which dusty mass loss begins is largely invariant with metallicity, but its presence correlates strongly with long-period variability. This suggests that the winds of low-mass stars have a significant driver that is not radiation pressure, but may be acoustic driving by pulsations.

  8. A trim-loss minimization in a produce-handling vehicle production plant

    Directory of Open Access Journals (Sweden)

    Apichai Ritvirool

    2007-01-01

    Full Text Available How to cut out the required pieces from raw materials by minimizing waste is a trim-loss problem. The integer linear programming (ILP model was developed to solve this problem. In addition, this ILPmodel could be used for planning an order over some future time period. Time horizon of ordering raw material including weekly, monthly, quarterly, and annually could be planned to reduce the trim loss. Thenumerical examples using an industrial case study of a produce-handling vehicle production plant were presented to illustrate how the proposed ILP model could be applied to actual systems and the types ofinformation that was obtained relative to implementation. The results showed that the proposed ILP model can be used as a decision support tool for selecting time horizon of order planning and cutting patterns todecrease material cost and waste from cutting raw material.

  9. Layoffs and tradeoffs: production, quality, and safety demands under the threat of job loss.

    Science.gov (United States)

    Probst, Tahira M

    2002-07-01

    Employees often face a conflict between production targets, quality assurance, and adherence to safety policies. In a time when layoffs are on the rise, it is important to understand the effects of employee job insecurity on these potentially competing demands. A laboratory experiment manipulated the threat of layoffs in a simulated organization and assessed its effect on employee productivity, product quality, and adherence to safety policies. Results suggest that student participants faced with the threat of layoffs were more productive, yet violated more safety rules and produced lower quality outputs, than participants in the control condition. Implications for organizations contemplating layoffs and directions for future research are discussed.

  10. Use of Insulated Covers over Product Crates to Reduce Losses in Amaranth during Shipping Delays

    Directory of Open Access Journals (Sweden)

    Lizanne Wheeler

    2015-12-01

    Full Text Available Amaranth is a leafy vegetable with high nutrient content which is sensitive to temperature and low relative humidity. Delays in shipment to market may result in significant losses, therefore improved packaging to minimize mechanical damage and reduce moisture loss are desirable. Amaranth was stored in three types of consumer packages, bunches, clamshells and thin plastic bags, within vented plastic crates. Pallet loads were either covered with insulated material or not, while awaiting transportation. Results indicated covering pallets improved the color and overall quality while reducing weight loss and wilting. Covered crates had a “good” (7.6/9.0 overall quality while uncovered averaged 5.5/9.0 or “moderate” quality. There were significant differences in consumer package type, with the bagged amaranth having almost “excellent” quality (8.8/9.0 compared to “good-fair” quality in clamshells (6.2/9.0 and “poor-fair” quality in the control bunches (4.7/9.0. Amaranth stored in thin plastic bags was better in quality and color, with less weight loss and wilting, however, temperatures at the end of six hours of storage were higher and this may lead to microbial growth. Storage of amaranth in thin bags or clamshell packages, within plastic crates covered with insulated pallet covers while awaiting shipping resulted in improved overall quality and color.

  11. Wetland Loss Patterns and Inundation-Productivity Relationships Prognosticate Widespread Salt Marsh Loss for Southern New England

    Science.gov (United States)

    Tidal salt marsh is a key defense against, yet is especially vulnerable to, the effects of accelerated sea level rise. To determine whether salt marshes in southern New England will be stable given increasing inundation over the coming decades, we examined current loss patterns, ...

  12. Caregiver burden, productivity loss, and indirect costs associated with caring for patients with poststroke spasticity

    Science.gov (United States)

    Ganapathy, Vaidyanathan; Graham, Glenn D; DiBonaventura, Marco D; Gillard, Patrick J; Goren, Amir; Zorowitz, Richard D

    2015-01-01

    Objective Many stroke survivors experience poststroke spasticity and the related inability to perform basic activities, which necessitates patient management and treatment, and exerts a considerable burden on the informal caregiver. The current study aims to estimate burden, productivity loss, and indirect costs for caregivers of stroke survivors with spasticity. Methods Internet survey data were collected from 153 caregivers of stroke survivors with spasticity including caregiving time and difficulty (Oberst Caregiver Burden Scale), Work Productivity and Activity Impairment measures, and caregiver and patient characteristics. Fractional logit models examined predictors of work-related restriction, and work losses were monetized (2012 median US wages). Results Mean Oberst Caregiver Burden Scale time and difficulty scores were 46.1 and 32.4, respectively. Employed caregivers (n=71) had overall work restriction (32%), absenteeism (9%), and presenteeism (27%). Caregiver characteristics, lack of nursing home coverage, and stroke survivors’ disability predicted all work restriction outcomes. The mean total lost-productivity cost per employed caregiver was US$835 per month (>$10,000 per year; 72% attributable to presenteeism). Conclusion These findings demonstrate the substantial burden of caring for stroke survivors with spasticity illustrating the societal and economic impact of stroke that extends beyond the stroke survivor. PMID:26609225

  13. Analysis of a compartmental model of amyloid beta production, irreversible loss and exchange in humans.

    Science.gov (United States)

    Elbert, Donald L; Patterson, Bruce W; Bateman, Randall J

    2015-03-01

    Amyloid beta (Aβ) peptides, and in particular Aβ42, are found in senile plaques associated with Alzheimer's disease. A compartmental model of Aβ production, exchange and irreversible loss was recently developed to explain the kinetics of isotope-labeling of Aβ peptides collected in cerebrospinal fluid (CSF) following infusion of stable isotope-labeled leucine in humans. The compartmental model allowed calculation of the rates of production, irreversible loss (or turnover) and short-term exchange of Aβ peptides. Exchange of Aβ42 was particularly pronounced in amyloid plaque-bearing participants. In the current work, we describe in much greater detail the characteristics of the compartmental model to two distinct audiences: physician-scientists and biokineticists. For physician-scientists, we describe through examples the types of questions the model can and cannot answer, as well as correct some misunderstandings of previous kinetic analyses applied to this type of isotope labeling data. For biokineticists, we perform a system identifiability analysis and a sensitivity analysis of the kinetic model to explore the global and local properties of the model. Combined, these analyses motivate simplifications from a more comprehensive physiological model to the final model that was previously presented. The analyses clearly demonstrate that the current dataset and compartmental model allow determination with confidence a single 'turnover' parameter, a single 'exchange' parameter and a single 'delay' parameter. When combined with CSF concentration data for the Aβ peptides, production rates may also be obtained. Copyright © 2015 Elsevier Inc. All rights reserved.

  14. Postural control assessment in students with normal hearing and sensorineural hearing loss.

    Science.gov (United States)

    Melo, Renato de Souza; Lemos, Andrea; Macky, Carla Fabiana da Silva Toscano; Raposo, Maria Cristina Falcão; Ferraz, Karla Mônica

    2015-01-01

    Children with sensorineural hearing loss can present with instabilities in postural control, possibly as a consequence of hypoactivity of their vestibular system due to internal ear injury. To assess postural control stability in students with normal hearing (i.e., listeners) and with sensorineural hearing loss, and to compare data between groups, considering gender and age. This cross-sectional study evaluated the postural control of 96 students, 48 listeners and 48 with sensorineural hearing loss, aged between 7 and 18 years, of both genders, through the Balance Error Scoring Systems scale. This tool assesses postural control in two sensory conditions: stable surface and unstable surface. For statistical data analysis between groups, the Wilcoxon test for paired samples was used. Students with hearing loss showed more instability in postural control than those with normal hearing, with significant differences between groups (stable surface, unstable surface) (ppostural control compared to normal hearing students of the same gender and age. Copyright © 2014 Associação Brasileira de Otorrinolaringologia e Cirurgia Cérvico-Facial. Published by Elsevier Editora Ltda. All rights reserved.

  15. Production planning and control of less emitting production systems

    Energy Technology Data Exchange (ETDEWEB)

    Haasis, H.D. [Bremen Univ. (Germany)

    1995-12-31

    The concept of integral environmental protection has been growing in importance within Western Europe in recent years. Increasingly, it has come to be recognized that no one part of the environment is separate from any other, it functions as a whole. Yet, pollution control was until recently, usually based on an approach which considers emissions to air, water, and land separately. That has begun to change, particularly since the 1987 report by the World Commission on Environment and Development. This can be recognized, for example, within the proposal for a Directive of the Council of the European Union on Integrated Pollution Prevention and Control. By this, the environmental media are placed on an equal legislative footing so that the final result will be that the way in which an installation is operated will be better for the whole environment. In other words, less emission production systems are obtained. Realization of an integral concept or of less emission production systems initially requires technical measures for the avoidance and the minimization of emissions, as well as recovery and recycling of materials and substances

  16. Production planning and control of less emitting production systems

    Energy Technology Data Exchange (ETDEWEB)

    Haasis, H D [Bremen Univ. (Germany)

    1996-12-31

    The concept of integral environmental protection has been growing in importance within Western Europe in recent years. Increasingly, it has come to be recognized that no one part of the environment is separate from any other, it functions as a whole. Yet, pollution control was until recently, usually based on an approach which considers emissions to air, water, and land separately. That has begun to change, particularly since the 1987 report by the World Commission on Environment and Development. This can be recognized, for example, within the proposal for a Directive of the Council of the European Union on Integrated Pollution Prevention and Control. By this, the environmental media are placed on an equal legislative footing so that the final result will be that the way in which an installation is operated will be better for the whole environment. In other words, less emission production systems are obtained. Realization of an integral concept or of less emission production systems initially requires technical measures for the avoidance and the minimization of emissions, as well as recovery and recycling of materials and substances

  17. Improving production control within the automotive industry

    Energy Technology Data Exchange (ETDEWEB)

    Simon, R L

    1982-01-01

    The problems of controlling and minimising design and manufacturing information within the automotive industry are both costly and do not make maximum use of previous experience. With the advent of CAD/CAM, many new techniques have evolved for the speedy construction of design and manufacturing data bases. A means of binding together these data bases and controlling the design and process planning information is now presented in the form of Computervision's Migraphics and Miplan software. This gives a data retrieval capability from all area's of the production cycle including design and detail, numerical control and robotics, process planning, manufacture and procurement. Together with its numerous analytical capabilities this sorftware provides an excellent tool for the optimisation of manufacturing techniques, thus providing a complete CAD/CAM system from a single data base.

  18. Evaluation of Loss Resources during Sugarcane Production Process and Provide Solutions to Reduce Waste

    Directory of Open Access Journals (Sweden)

    H Zakidizaji

    2018-03-01

    Full Text Available Introduction No use of advanced mechanization and weakness in post harvesting technology are the main reasons of agricultural losses. Some of these wastes (agricultural losses are related to crop growing conditions in field and the remaining to processing of sugar in mill. The most useful priority setting methods for agricultural projects are the Analytic Hierarchy Process (AHP. So, this study presents an introduction of application manner of the AHP as a mostly common method of setting agricultural projects priorities. The purpose of this work is studying the sugarcane loss during production process using AHP in Khuzestan province. Materials and Methods The resources of sugarcane waste have been defined based on expert’s opinions. A questionnaire and personal interviews have formed the basis of this research. The study was applied to a panel of qualified informants made up of thirty-two experts. Those interviewed were distributed in Sugarcane Development and By-products Company in 2015-2016. Then, with using the analytical hierarchy process, a questionnaire was designed for defining the weight and importance of parameters effecting on sugarcane waste. For this method of evaluation, three main criteria considered, were yield criteria, cost criteria and income criteria. Criteria and prioritizing of them was done by questionnaire and interview with sophisticated experts. This technique determined and ranked the importance of sugarcane waste resources based on attributing relative weights to factors with respect to comments provided in the questionnaires. Analytical Hierarchy Process was done by using of software (Expert choice and the inconsistency rate on expert judgments was investigated. Results and Discussion How to use agricultural implements and machinery during planting and harvesting of sugarcane, can increase or decrease the volume of waste. In planting period, the losses mainly consists of loss of setts during cutting them by machine

  19. Productivity loss at work; health-related and work-related factors.

    Science.gov (United States)

    van den Heuvel, Swenne G; Geuskens, Goedele A; Hooftman, Wendela E; Koppes, Lando L J; van den Bossche, Seth N J

    2010-09-01

    Productivity loss is an increasing problem in an aging working population that is decreasing in numbers. The aim of this study is to identify work-related and health-related characteristics associated with productivity loss, due to either sickness absence or reduced performance at work. In this cross-sectional study, data of the Netherlands Working Conditions Survey of 2007 were used, which includes a national representative sample of 22,759 employees aged 15 to 64 years. Demographic characteristics, health-related and work-related factors were assessed with a questionnaire. Logistic regression analyses were carried out to study the relationship of work-related and health-related factors with low performance at work and sickness absence in the past 12 months. Poor general health, the number of longstanding health conditions, and most types of longstanding health conditions were associated with productivity loss. Health-related factors were in general stronger associated with sickness absence than with low performance at work. Performance: poor health OR 1.54 CI 1.38-1.71, >1 health conditions OR 1.21 CI 1.09-1.35; sickness absence: poor health OR 2.62 CI 2.33-2.93, >1 health conditions OR 2.47 CI 2.21-2.75. Of the different types of longstanding health conditions, only psychological complaints and to a small extent musculoskeletal symptoms, were associated with low performance (respectively OR 1.54 CI 1.27-1.87; OR 1.09 CI 1.00-1.18). Low performance at work was less likely among employees with high physically demanding work (shift work OR 0.70 CI 0.63-0.76, using force OR 0.78 CI 0.72-0.84, and repetitive movements OR 0.74 CI 0.70-0.79). Psychosocial factors were stronger associated with low performance at work than with sickness absence (performance: job autonomy OR 1.28 CI 1.21-1.37, job demands OR 1.23 CI 1.16-1.31, emotionally demanding work OR 1.73 CI 1.62-1.85; sickness absence: job autonomy ns, job demands OR 1.09 CI 1.03-1.17, emotionally demanding work OR

  20. Productivity losses attributable to untreated chlamydial infection and associated pelvic inflammatory disease in reproductive-aged women.

    Science.gov (United States)

    Blandford, John M; Gift, Thomas L

    2006-10-01

    The productivity losses attributable to disease-related morbidity and mortality impose a burden on society in general and on employers in particular. A reliable assessment of the productivity losses associated with untreated infection with Chlamydia trachomatis (Ct) would complement earlier work on direct medical costs and contribute to an estimate of the full cost of chlamydial disease. The goal of this study was to estimate the discounted lifetime productivity losses attributable to untreated chlamydial infection in reproductive-aged women. We developed a cost model using Monte Carlo methods to estimate the lifetime discounted productivity losses attributable to untreated lower genital tract Ct infection among reproductive-aged women. The model considered the impact of disability resulting from acute pelvic inflammatory disease (PID) associated with untreated Ct infection and from the sequelae of acute PID, including chronic pelvic pain, ectopic pregnancy, and infertility. To accommodate disparate Ct infection rates and labor market characteristics across age groups, we matched age-based risk factors for Ct infection with labor market patterns. Data sources included the 2001 National Chlamydia Surveillance Data, the 2001 Current Population Survey, and published literature. Estimates indicate that the mean weighted productivity losses per untreated Ct infection were approximately US dollars 130 (in year 2001 dollars). Mean weighted productivity losses per case of acute PID were estimated at US dollars 649. Estimated productivity losses were highly correlated with age, reflecting age-dependent differences in labor market characteristics. The productivity losses attributable to untreated infection with Ct and to sequelae of this infection form a substantial portion of the total economic burden of disease. Effective programs to prevent chlamydial infection and effective screening, diagnosis, and treatment of Ct-infected women may reduce productivity losses and

  1. Effects of manipulating eating frequency during a behavioral weight loss intervention: a pilot randomized controlled trial.

    Science.gov (United States)

    Bachman, Jessica L; Raynor, Hollie A

    2012-05-01

    Eating frequency has been inversely related to BMI but the impact of eating frequency on weight loss is unclear. This randomized controlled trial pilot study examined the effect of eating frequency on hunger, energy intake, and weight loss during a 6-month behavioral weight loss intervention. Participants (age: 51.0 ± 9.9 years, BMI: 35.5 ± 4.8 kg/m(2), 57.8% female, 94.1% white) were randomized to one of two eating frequency prescriptions: Three meal (n = 25): three eating bouts/day; or grazing (n = 26): eat at least 100 kcals every 2-3 h. Both groups attended 20 sessions and had identical dietary (1,200-1,500 kcals/day, frequency than three meal at 6 months (5.8 ± 1.1 eating bouts/day vs. 3.2 ± 0.6 eating bouts/day, P weight loss intervention.

  2. Exploring how pain leads to productivity loss in primary care consulters for osteoarthritis: a prospective cohort study.

    Science.gov (United States)

    Wilkie, Ross; Hay, Elaine M; Croft, Peter; Pransky, Glenn

    2015-01-01

    Osteoarthritis pain has become a leading cause of decreased productivity and work disability in older workers, a major concern in primary care. How osteoarthritis pain leads to decreased productivity at work is unclear; the aim of this study was to elucidate causal mechanisms and thus identify potential opportunities for intervention. Population-based prospective cohort study of primary care consulters with osteoarthritis. Path analysis was used to test proposed mechanisms by examining the association between pain at baseline, and onset of work productivity loss at three years for mediation by physical limitation, depression, poor sleep and poor coping mechanisms. High pain intensity was associated with onset of work productivity loss (Adjusted Odds Ratio 2.5; 95%CI 1.3, 4.8). About half of the effect of pain on work productivity was a direct effect, and half was mediated by the impact of pain on physical function. Depression, poor sleep quality and poor coping did not mediate the association between high pain intensity and onset of work productivity loss. As pain is a major cause of work productivity loss, results suggest that decreasing pain should be a major focus. However, successfully improving function may have an indirect effect by decreasing the impact of pain on work productivity, especially important as significant pain reduction is often difficult to achieve. Although depression, sleep problems, and coping strategies may be directly related to work productivity loss, addressing these issues may not have much effect on the significant impact of pain on work productivity.

  3. A smartphone-supported weight loss program: design of the ENGAGED randomized controlled trial

    Directory of Open Access Journals (Sweden)

    Pellegrini Christine A

    2012-11-01

    Full Text Available Abstract Background Obesity remains a major public health challenge, demanding cost-effective and scalable weight management programs. Delivering key treatment components via mobile technology offers a potential way to reduce expensive in-person contact, thereby lowering the cost and burden of intensive weight loss programs. The ENGAGED study is a theory-guided, randomized controlled trial designed to examine the feasibility and efficacy of an abbreviated smartphone-supported weight loss program. Methods/design Ninety-six obese adults (BMI 30–39.9 kg/m2 will be randomized to one of three treatment conditions: (1 standard behavioral weight loss (STND, (2 technology-supported behavioral weight loss (TECH; or (3 self-guided behavioral weight loss (SELF. All groups will aim to achieve a 7% weight loss goal by reducing calorie and fat intake and progressively increasing moderate intensity physical activity to 175 minutes/week. STND and TECH will attend 8 group sessions and receive regular coaching calls during the first 6 months of the intervention; SELF will receive the Group Lifestyle Balance Program DVD’s and will not receive coaching calls. During months 1–6, TECH will use a specially designed smartphone application to monitor dietary intake, body weight, and objectively measured physical activity (obtained from a Blue-tooth enabled accelerometer. STND and SELF will self-monitor on paper diaries. Linear mixed modeling will be used to examine group differences on weight loss at months 3, 6, and 12. Self-monitoring adherence and diet and activity goal attainment will be tested as mediators. Discussion ENGAGED is an innovative weight loss intervention that integrates theory with emerging mobile technologies. We hypothesize that TECH, as compared to STND and SELF, will result in greater weight loss by virtue of improved behavioral adherence and goal achievement. Trial registration NCT01051713

  4. QUALITY CONTROL OF SOME TRADITIONAL MEAT PRODUCTS

    Directory of Open Access Journals (Sweden)

    S. DOBRINAS

    2014-03-01

    Full Text Available In this paper, we present the characterization of six traditional meat products: smoked file, smoked bacon, pork sausages, sausage prepared from swine’s entrails, pork pastrami, sheep sausages. Organoleptic tests (the aspect and shape, the aspect of freshly cut in the section, smell, taste and consistency, physico-chemical and microbiological determinations (NTG, Salmonella, Listeria monocytogenes and Escherichia coli were performed. These analyzes are a part of quality control that must be done in order to obtain a certificate from the Ministry of Agriculture for a traditional product. After identification of H2S and starch and according to fat oxidation degree it was concluded that analyzed samples didn’t contain counterfeiters and all parameters analyzed are within the maximum limits allowed by law. Considering all the procedures for manufacturing, characteristics of raw and auxiliary materials, organoleptic properties of final products analyzed in this study, it can be concluded that analyzed meat specialties meet the requirements of Ministry Order no. 690/28.09.2004 for the traditional products certification.

  5. Fission product transport and behavior during two postulated loss of flow transients in the air

    International Nuclear Information System (INIS)

    Adams, J.P.; Carboneau, M.L.

    1991-01-01

    This document discusses fission product behavior during two postulated loss-of-flow accidents (leading to high- and low-pressure core degradation, respectively) in the Advanced Test Reactor (ATR). These transients are designated ATR Transient LCPI5 (high-pressure) and LPP9 (low-pressure). Normally, transients of this nature would be easily mitigated using existing safety systems and procedures. In these analyses, failure of these safety systems was assumed so that core degradation and fission product release could be analyzed. A probabilistic risk assessment indicated that the probability of occurrence for these two transients is of the order of 10 -5 and 10 -7 per reactor year for LCP15 and LPP9, respectively

  6. Caregiver burden, productivity loss, and indirect costs associated with caring for patients with poststroke spasticity

    Directory of Open Access Journals (Sweden)

    Ganapathy V

    2015-11-01

    Full Text Available Vaidyanathan Ganapathy,1 Glenn D Graham,2 Marco D DiBonaventura,3 Patrick J Gillard,1 Amir Goren,3 Richard D Zorowitz41Allergan, Irvine, CA, USA; 2Department of Veterans Affairs, San Francisco, CA, USA; 3Health Outcomes Practice, Kantar Health, New York, NY, USA; 4Johns Hopkins Bayview Medical Center, Baltimore, MD, USAObjective: Many stroke survivors experience poststroke spasticity and the related inability to perform basic activities, which necessitates patient management and treatment, and exerts a considerable burden on the informal caregiver. The current study aims to estimate burden, productivity loss, and indirect costs for caregivers of stroke survivors with spasticity.Methods: Internet survey data were collected from 153 caregivers of stroke survivors with spasticity including caregiving time and difficulty (Oberst Caregiver Burden Scale, Work Productivity and Activity Impairment measures, and caregiver and patient characteristics. Fractional logit models examined predictors of work-related restriction, and work losses were monetized (2012 median US wages.Results: Mean Oberst Caregiver Burden Scale time and difficulty scores were 46.1 and 32.4, respectively. Employed caregivers (n=71 had overall work restriction (32%, absenteeism (9%, and presenteeism (27%. Caregiver characteristics, lack of nursing home coverage, and stroke survivors’ disability predicted all work restriction outcomes. The mean total lost-productivity cost per employed caregiver was US$835 per month (>$10,000 per year; 72% attributable to presenteeism.Conclusion: These findings demonstrate the substantial burden of caring for stroke survivors with spasticity illustrating the societal and economic impact of stroke that extends beyond the stroke survivor.Keywords: burden, caregiver, productivity, spasticity, stroke

  7. A numerically research on energy loss evaluation in a centrifugal pump system based on local entropy production method

    Directory of Open Access Journals (Sweden)

    Hou Hucan

    2017-01-01

    Full Text Available Inspired by wide application of the second law of thermodynamics to flow and heat transfer devices, local entropy production analysis method was creatively introduced into energy assessment system of centrifugal water pump. Based on Reynolds stress turbulent model and energy equation model, the steady numerical simulation of the whole flow passage of one IS centrifugal pump was carried out. The local entropy production terms were calculated by user defined functions, mainly including wall entropy production, turbulent entropy production, and viscous entropy production. The numerical results indicated that the irreversible energy loss calculated by the local entropy production method agreed well with that calculated by the traditional method but with some deviations which were probably caused by high rotatability and high curvature of impeller and volute. The wall entropy production and turbulent entropy production took up large part of the whole entropy production about 48.61% and 47.91%, respectively, which indicated that wall friction and turbulent fluctuation were the major factors in affecting irreversible energy loss. Meanwhile, the entropy production rate distribution was discussed and compared with turbulent kinetic energy dissipation rate distribution, it showed that turbulent entropy production rate increased sharply at the near wall regions and both distributed more uniformly. The blade region in leading edge near suction side, trailing edge and volute tongue were the main regions to generate irreversible exergy loss. This research broadens a completely new view in evaluating energy loss and further optimizes pump using entropy production minimization.

  8. Epilepsy in Sweden: health care costs and loss of productivity--a register-based approach.

    Science.gov (United States)

    Bolin, Kristian; Lundgren, Anders; Berggren, Fredrik; Källén, Kristina

    2012-12-01

    The objective was to estimate health care costs and productivity losses due to epilepsy in Sweden and to compare these estimates to previously published estimates. Register data on health care utilisation, pharmaceutical sales, permanent disability and mortality were used to calculate health care costs and costs that accrue due to productivity losses. By linkage of register information, we were able to distinguish pharmaceuticals prescribed against epilepsy from prescriptions that were prompted by other indications. The estimated total cost of epilepsy in Sweden in 2009 was 441 million, which corresponds to an annual per-patient cost of 8,275. Health care accounted for about 16% of the estimated total cost, and drug costs accounted for about 7% of the total cost. The estimated health care cost corresponded to about 0.2% of the total health care cost in Sweden in 2009. Indirect costs were estimated at 370 million, 84% of which was due to sickness absenteeism. Costs resulting from epilepsy-attributable premature deaths or permanent disability to work accounted for about 1% of the total indirect cost in Sweden in 2009. The per-patient cost of epilepsy is substantial. Thus, even though the prevalence of the illness is relatively small, the aggregated cost that epilepsy incurs on society is significant.

  9. Evaluation of Losses Of Cold Energy of Cryogen Products in The Transport Systems

    Science.gov (United States)

    Uglanov, Dmitry; Sarmin, Dmitry; Tsapkova, Alexandra; Burdina, Yana

    2017-12-01

    At present, there are problems of energy saving in various areas of human life and in power complexes of industrial plants. One possible solution to the problem of increasing energy efficiency is the use of liquefied natural gas and its cold energy. Pipelines for fuel or gas supply in cryogen supply systems have different length depending on the mutual position of storage and cryogen consumption devices relatively to a start construction. Cryogen supply and transport systems include a lot of fittings of different assortment. Reservoirs can be installed on different elevation points. To reduce heat inleak and decrease cold energy of cryogen product different kinds of thermal insulation are used. Cryogen pipelines provide required operation conditions of storage and gasifying systems. The aim of the thermal calculation of cryogen transport and supply systems is to define the value of cryogen heat. In this paper it is shown values of cryogen temperature rise due to heat inleaks at cryogen’s transfer along transport systems for ethane, methane, oxygen and nitrogen were calculated. Heat inleaks also due to hydraulic losses were calculated. Specific losses of cold energy of cryogen product for laminar and turbulent flow were calculated. Correspondences of temperature rise, critical pipeline’s length and Reynolds number were defined for nitrogen, argon, methane and oxygen.

  10. Thermo-electrochemical production of compressed hydrogen from methane with near-zero energy loss

    Science.gov (United States)

    Malerød-Fjeld, Harald; Clark, Daniel; Yuste-Tirados, Irene; Zanón, Raquel; Catalán-Martinez, David; Beeaff, Dustin; Morejudo, Selene H.; Vestre, Per K.; Norby, Truls; Haugsrud, Reidar; Serra, José M.; Kjølseth, Christian

    2017-11-01

    Conventional production of hydrogen requires large industrial plants to minimize energy losses and capital costs associated with steam reforming, water-gas shift, product separation and compression. Here we present a protonic membrane reformer (PMR) that produces high-purity hydrogen from steam methane reforming in a single-stage process with near-zero energy loss. We use a BaZrO3-based proton-conducting electrolyte deposited as a dense film on a porous Ni composite electrode with dual function as a reforming catalyst. At 800 °C, we achieve full methane conversion by removing 99% of the formed hydrogen, which is simultaneously compressed electrochemically up to 50 bar. A thermally balanced operation regime is achieved by coupling several thermo-chemical processes. Modelling of a small-scale (10 kg H2 day-1) hydrogen plant reveals an overall energy efficiency of >87%. The results suggest that future declining electricity prices could make PMRs a competitive alternative for industrial-scale hydrogen plants integrating CO2 capture.

  11. Accuracy of body image perception and preferred weight loss strategies in schizophrenia: a controlled pilot study.

    Science.gov (United States)

    Loh, C; Meyer, J M; Leckband, S G

    2008-02-01

    Obesity in severely mentally ill (SMI) populations is an increasing problem, but there is no controlled data regarding the relationship between SMI and weight perception. Fifty patients with schizophrenia and 50 demographically matched control participants were recruited. Weight, height, and body image accuracy were assessed for all participants, and assessments of mood, psychotic symptom severity and anxiety, and preferred modes of weight loss were assessed for the schizophrenia sample. Patients with schizophrenia were significantly more likely to be obese than controls (46% vs. 18%, P < 0.005), and most patients expressed an interest in losing weight. Obese participants with schizophrenia underestimated their body size (11.0%) more than controls (4.9%) (P < 0.05). Patients with schizophrenia are more likely to underestimate their body size, independent of the effects of obesity. However, they also express concern about weight issues and willingness to participate in psychoeducational groups targeted at weight loss.

  12. Developmental Regulation with Progressive Vision Loss: Use of Control Strategies and Affective Well-Being

    Science.gov (United States)

    Schilling, Oliver K.; Wahl, Hans-Werner; Boerner, Kathrin; Horowitz, Amy; Reinhardt, Joann P.; Cimarolli, Verena R.; Brennan-Ing, Mark; Heckhausen, Jutta

    2016-01-01

    The present study addresses older adults' developmental regulation when faced with progressive and irreversible vision loss. We used the motivational theory of life span development as a conceptual framework and examined changes in older adults' striving for control over everyday goal achievement, and their association with affective well-being,…

  13. Effect of gear shift and engine start losses on control strategies for hybrid electric vehicles

    NARCIS (Netherlands)

    Ngo, V.; Hofman, T.; Steinbuch, M.; Serrarens, A.

    2012-01-01

    In this paper, energetic loss models in the events of shifting gear and starting engine in a parallel Hybrid Electric Vehicle equipped with an Automated Manual Transmission (AMT) will be introduced. The optimal control algorithm for the start-stop, power split and gear shift problem based on Dynamic

  14. Control and modulation for loss minimization for dc/dc converters in wind farm

    DEFF Research Database (Denmark)

    Dincan, Catalin Gabriel; Kjær, Philip Carne

    2016-01-01

    For a DC wind turbine, a single phase series-resonant converter for unidirectional power is studied. This paper aims to identify and compare impact on electrical losses and component ratings from the choice of three candidate control strategies. The evaluation is purely based on circuit simulatio...

  15. 40 CFR 52.246 - Control of dry cleaning solvent vapor losses.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 3 2010-07-01 2010-07-01 false Control of dry cleaning solvent vapor... cleaning solvent vapor losses. (a) For the purpose of this section, “dry cleaning operation” means that process by which an organic solvent is used in the commercial cleaning of garments and other fabric...

  16. Steady-state and loss-of-pumping accident analyses of the Savannah River new production reactor representative design

    International Nuclear Information System (INIS)

    Pryor, R.J.; Maloney, K.J.

    1990-10-01

    This document contains the steady-state and loss-of-pumping accident analysis of the representative design for the Savannah River heavy water new production reactor. A description of the reactor system and computer input model, the results of the steady-state analysis, and the results of four loss-of-pumping accident calculations are presented. 5 refs., 37 figs., 4 tabs

  17. Considering linear generator copper losses on model predictive control for a point absorber wave energy converter

    International Nuclear Information System (INIS)

    Montoya Andrade, Dan-El; Villa Jaén, Antonio de la; García Santana, Agustín

    2014-01-01

    Highlights: • We considered the linear generator copper losses in the proposed MPC strategy. • We maximized the power transferred to the generator side power converter. • The proposed MPC increases the useful average power injected into the grid. • The stress level of the PTO system can be reduced by the proposed MPC. - Abstract: The amount of energy that a wave energy converter can extract depends strongly on the control strategy applied to the power take-off system. It is well known that, ideally, the reactive control allows for maximum energy extraction from waves. However, the reactive control is intrinsically noncausal in practice and requires some kind of causal approach to be applied. Moreover, this strategy does not consider physical constraints and this could be a problem because the system could achieve unacceptable dynamic values. These, and other control techniques have focused on the wave energy extraction problem in order to maximize the energy absorbed by the power take-off device without considering the possible losses in intermediate devices. In this sense, a reactive control that considers the linear generator copper losses has been recently proposed to increase the useful power injected into the grid. Among the control techniques that have emerged recently, the model predictive control represents a promising strategy. This approach performs an optimization process on a time prediction horizon incorporating dynamic constraints associated with the physical features of the power take-off system. This paper proposes a model predictive control technique that considers the copper losses in the control optimization process of point absorbers with direct drive linear generators. This proposal makes the most of reactive control as it considers the copper losses, and it makes the most of the model predictive control, as it considers the system constraints. This means that the useful power transferred from the linear generator to the power

  18. Productivity loss due to premature mortality caused by blood cancer: a study based on patients undergoing stem cell transplantation.

    Science.gov (United States)

    Ortega-Ortega, Marta; Oliva-Moreno, Juan; Jiménez-Aguilera, Juan de Dios; Romero-Aguilar, Antonio; Espigado-Tocino, Ildefonso

    2015-01-01

    Stem cell transplantation has been used for many years to treat haematological malignancies that could not be cured by other treatments. Despite this medical breakthrough, mortality rates remain high. Our purpose was to evaluate labour productivity losses associated with premature mortality due to blood cancer in recipients of stem cell transplantations. We collected primary data from the clinical histories of blood cancer patients who had undergone stem cell transplantation between 2006 and 2011 in two Spanish hospitals. We carried out a descriptive analysis and calculated the years of potential life lost and years of potential productive life lost. Labour productivity losses due to premature mortality were estimated using the Human Capital method. An alternative approach, the Friction Cost method, was used as part of the sensitivity analysis. Our findings suggest that, in a population of 179 transplanted and deceased patients, males and people who die between the ages of 30 and 49 years generate higher labour productivity losses. The estimated loss amounts to over €31.4 million using the Human Capital method (€480,152 using the Friction Cost method), which means an average of €185,855 per death. The highest labour productivity losses are produced by leukaemia. However, lymphoma generates the highest loss per death. Further efforts are needed to reduce premature mortality in blood cancer patients undergoing transplantations and reduce economic losses. Copyright © 2014 SESPAS. Published by Elsevier Espana. All rights reserved.

  19. Evaluation of Control and Protection System for Loss of Electrical Power Supply System of Water-Cooling Nuclear Power Plant

    International Nuclear Information System (INIS)

    Suhaemi, Tjipta; Djen Djen; Setyono; Jambiar, Riswan; Rozali, Bang; Setyo P, Dwi; Tjahyono, Hendro

    2000-01-01

    Evaluation of control and protection system for loss of electrical power supply system of water-cooled nuclear power plant has been done. The loss of electrical power supply. The accident covered the loss of external electrical load and loss of ac power to the station auxiliaries. It is analysed by studying and observing the mechanism of electrical power system and mechanism of related control and protection system. The are two condition used in the evaluation i e without turbine trip and with turbine trip. From the evaluation it is concluded that the control and protection system can handled the failure caused by the loss of electrical power system

  20. Speed and Torque Control Strategies for Loss Reduction of Vertical Axis Wind Turbines

    Science.gov (United States)

    Argent, Michael; McDonald, Alasdair; Leithead, Bill; Giles, Alexander

    2016-09-01

    This paper builds on the work into modelling the generator losses for Vertical Axis Wind Turbines from their intrinsic torque cycling to investigate the effects of aerodynamic inefficiencies caused by the varying rotational speed resulting from different torque control strategies to the cyclic torque. This is achieved by modelling the wake that builds up from the rotation of the VAWT rotor to investigate how the wake responds to a changing rotor speed and how this in turn affects the torque produced by the blades as well as the corresponding change in generator losses and any changes to the energy extracted by the wind turbine rotor.

  1. THERMAL POWER LOSS COMPENSATION IN THE PRODUCTION OF COOKED AND DRIED GRAINS WITH HEAT PUMPS USING

    Directory of Open Access Journals (Sweden)

    S. A. Shevtsov

    2015-01-01

    Full Text Available Using scientificand practical experience and analysis of recent innovative activity on modernization of food concentrates production, a new variant of the energy-efficient processing of cereal crops using superheated steam and direct involvement in the cooking and drying process waste energy using the vapor compression heat pump was suggested. A method for production of cereal concentrates, which is realized using microprocessor control of technological parameters. According to the information on the processes of cereals washing, cooking, drying and cooling microprocessor provides regime parameters control under the restrictions due to both yield of cooked and dried cereal of high quality and economic feasibility. At the same time the amount of moisture is continuously determined in the recirculation loop formed by the evaporation from the cereals in the drying process. To implement the proposed method of cooked and dried cereals production it is offered to use refrigerationand compressor unit operating in a heat pump mode. The refrigerant to be used is khladon 12V1 CF2ClBr with a boiling point in the evaporator of 4°C and the condensing temperature of 153.7 °C. The use of the heat pump in the heat supply system of cooked and dried cereals production instead of electric heaters will reduce power costs by 1.72 times. The proposed method for the production and control of technological parameters in the field of the product acceptable technological properties will provide high quality cooked and dried cereals; an increase in thermal efficiency by making full use of the waste heat of superheated steam; the reduction of specific energy consumption by 25-30 %; the creation of waste-free and environmentally friendly technologies for cereal production.

  2. Aircraft Loss-of-Control Accident Prevention: Switching Control of the GTM Aircraft with Elevator Jam Failures

    Science.gov (United States)

    Chang, Bor-Chin; Kwatny, Harry G.; Belcastro, Christine; Belcastro, Celeste

    2008-01-01

    Switching control, servomechanism, and H2 control theory are used to provide a practical and easy-to-implement solution for the actuator jam problem. A jammed actuator not only causes a reduction of control authority, but also creates a persistent disturbance with uncertain amplitude. The longitudinal dynamics model of the NASA GTM UAV is employed to demonstrate that a single fixed reconfigured controller design based on the proposed approach is capable of accommodating an elevator jam failure with arbitrary jam position as long as the thrust control has enough control authority. This paper is a first step towards solving a more comprehensive in-flight loss-of-control accident prevention problem that involves multiple actuator failures, structure damages, unanticipated faults, and nonlinear upset regime recovery, etc.

  3. Microbial control of hydrogen sulfide production

    Energy Technology Data Exchange (ETDEWEB)

    Montgomery, A.D.; Bhupathiraju, V.K.; Wofford, N.; McInerney, M.J. [Univ. of Oklahoma, Tulsa, OK (United States)] [and others

    1995-12-31

    A sulfide-resistant strain of Thiobacillus denitrificans, strain F, prevented the accumulation of sulfide by Desulfovibrio desulfuricans when both organisms were grown in liquid medium. The wild-type strain of T. denitrificans did not prevent the accumulation of sulfide produced by D. desulfuricans. Strain F also prevented the accumulation of sulfide by a mixed population of sulfate-reducing bacteria enriched from an oil field brine. Fermentation balances showed that strain F stoichiometrically oxidized the sulfide produced by D. desulfuricans and the oil field brine enrichment to sulfate. The ability of a strain F to control sulfide production in an experimental system of cores and formation water from the Redfield, Iowa, natural gas storage facility was also investigated. A stable, sulfide-producing biofilm was established in two separate core systems, one of which was inoculated with strain F while the other core system (control) was treated in an identical manner, but was not inoculated with strain F. When formation water with 10 mM acetate and 5 mM nitrate was injected into both core systems, the effluent sulfide concentrations in the control core system ranged from 200 to 460 {mu}M. In the test core system inoculated with strain F, the effluent sulfide concentrations were lower, ranging from 70 to 110 {mu}M. In order to determine whether strain F could control sulfide production under optimal conditions for sulfate-reducing bacteria, the electron donor was changed to lactate and inorganic nutrients (nitrogen and phosphate sources) were added to the formation water. When nutrient-supplemented formation water with 3.1 mM lactate and 10 mM nitrate was used, the effluent sulfide concentrations of the control core system initially increased to about 3,800 {mu}M, and then decreased to about 1,100 {mu}M after 5 weeks. However, in the test core system inoculated with strain F, the effluent sulfide concentrations were much lower, 160 to 330 {mu}M.

  4. Control of Ochratoxin A Production in Grapes

    Directory of Open Access Journals (Sweden)

    Sofía Chulze

    2012-05-01

    Full Text Available Ochratoxin A (OTA is a mycotoxin commonly present in cereals, grapes, coffee, spices, and cocoa. Even though the main objective of the food and feed chain processors and distributors is to avoid the extended contamination of plant-derived foods and animal feeds with mycotoxins, until now, complete OTA removal from foods and feedstuffs is not feasible. Prevention through pre-harvest management is the best method for controlling mycotoxin contamination. However, in the case that the contamination occurs after this stage, the hazards associated with OTA must be managed through post-harvest strategies. Due to the increasing number of fungal strains resistant to chemical fungicides and the impact of these pesticides on the environment and human health, maximum levels of chemical residues have been regulated in many products. Alternative methods are necessary to substitute or complement treatments with fungicides to control fungi under field or storage conditions. Yeasts are considered one of the most potent biocontrol agents due to their biology and non-toxic properties. Epiphytic yeasts are the major component of the microbial community on the surface of grape berries and they are evolutionarily adapted to this ecological niche. Nowadays, several yeast species included in different genera are considered as potential biocontrol agents to control both, growth of ochratoxigenic Aspergillus species and OTA accumulation.

  5. A comparison of average wages with age-specific wages for assessing indirect productivity losses: analytic simplicity versus analytic precision.

    Science.gov (United States)

    Connolly, Mark P; Tashjian, Cole; Kotsopoulos, Nikolaos; Bhatt, Aomesh; Postma, Maarten J

    2017-07-01

    Numerous approaches are used to estimate indirect productivity losses using various wage estimates applied to poor health in working aged adults. Considering the different wage estimation approaches observed in the published literature, we sought to assess variation in productivity loss estimates when using average wages compared with age-specific wages. Published estimates for average and age-specific wages for combined male/female wages were obtained from the UK Office of National Statistics. A polynomial interpolation was used to convert 5-year age-banded wage data into annual age-specific wages estimates. To compare indirect cost estimates, average wages and age-specific wages were used to project productivity losses at various stages of life based on the human capital approach. Discount rates of 0, 3, and 6 % were applied to projected age-specific and average wage losses. Using average wages was found to overestimate lifetime wages in conditions afflicting those aged 1-27 and 57-67, while underestimating lifetime wages in those aged 27-57. The difference was most significant for children where average wage overestimated wages by 15 % and for 40-year-olds where it underestimated wages by 14 %. Large differences in projecting productivity losses exist when using the average wage applied over a lifetime. Specifically, use of average wages overestimates productivity losses between 8 and 15 % for childhood illnesses. Furthermore, during prime working years, use of average wages will underestimate productivity losses by 14 %. We suggest that to achieve more precise estimates of productivity losses, age-specific wages should become the standard analytic approach.

  6. Regional economic activity and absenteeism: a new approach to estimating the indirect costs of employee productivity loss.

    Science.gov (United States)

    Bankert, Brian; Coberley, Carter; Pope, James E; Wells, Aaron

    2015-02-01

    This paper presents a new approach to estimating the indirect costs of health-related absenteeism. Productivity losses related to employee absenteeism have negative business implications for employers and these losses effectively deprive the business of an expected level of employee labor. The approach herein quantifies absenteeism cost using an output per labor hour-based method and extends employer-level results to the region. This new approach was applied to the employed population of 3 health insurance carriers. The economic cost of absenteeism was estimated to be $6.8 million, $0.8 million, and $0.7 million on average for the 3 employers; regional losses were roughly twice the magnitude of employer-specific losses. The new approach suggests that costs related to absenteeism for high output per labor hour industries exceed similar estimates derived from application of the human capital approach. The materially higher costs under the new approach emphasize the importance of accurately estimating productivity losses.

  7. Glycemic control and alveolar bone loss progression in type 2 diabetes.

    Science.gov (United States)

    Taylor, G W; Burt, B A; Becker, M P; Genco, R J; Shlossman, M

    1998-07-01

    This study tested the hypothesis that the risk for alveolar bone loss is greater, and bone loss progression more severe, for subjects with poorly controlled (PC) type 2 diabetes mellitus (type 2 DM) compared to those without type 2 DM or with better controlled (BC) type 2 DM. The PC group had glycosylated hemoglobin (HbA1) > or = 9%; the BC group had HbA1 or = 75% were used to identify the worst bone score (WBS) in the dentition. Change in worst bone score at follow-up, the outcome, was specified on a 4-category ordinal scale as no change, or a 1-, 2-, 3-, or 4-category increase over baseline WBS (WBS1). Poorly controlled diabetes, age, calculus, time to follow-up examination, and WBS1 were statistically significant explanatory variables in ordinal logistic regression models. Poorly controlled type 2 DM was positively associated with greater risk for a change in bone score (compared to subjects without type 2 DM) when the covariates were included in the model. The cumulative odds ratio (COR) at each threshold of the ordered response was 11.4 (95% CI = 2.5, 53.3). When contrasted with subjects with BC type 2 DM, the COR for those in the PC group was 5.3 (95% CI = 0.8, 53.3). The COR for subjects with BC type 2 DM was 2.2 (95% CI = 0.7, 6.5), when contrasted to those without type 2 DM. These results suggest that poorer glycemic control leads to both an increased risk for alveolar bone loss and more severe progression over those without type 2 DM, and that there may be a gradient, with the risk for bone loss progression for those with better controlled type 2 DM intermediate to the other 2 groups.

  8. Enhancement of loss detection capability using a combination of the Kalman Filter/Linear Smoother and controllable unit accounting approach

    International Nuclear Information System (INIS)

    Pike, D.H.; Morrison, G.W.

    1979-01-01

    An approach to loss detection is presented which combines the optimal loss detection capability of state estimation techniques with a controllable unit accounting approach. The state estimation theory makes use of a linear system model which is capable of modeling the interaction of various controllable unit areas within a given facility. An example is presented which illustrates the increase in loss detection probability which is realizable with state estimation techniques. Comparisons are made with a Shewhart Control Chart and the CUSUM statistic

  9. Oxidized lipids enhance RANKL production by T lymphocytes: implications for lipid-induced bone loss.

    Science.gov (United States)

    Graham, Lucia S; Parhami, Farhad; Tintut, Yin; Kitchen, Christina M R; Demer, Linda L; Effros, Rita B

    2009-11-01

    Osteoporosis is a systemic disease that is associated with increased morbidity, mortality and health care costs. Whereas osteoclasts and osteoblasts are the main regulators of bone homeostasis, recent studies underscore a key role for the immune system, particularly via activation-induced T lymphocyte production of receptor activator of NFkappaB ligand (RANKL). Well-documented as a mediator of T lymphocyte/dendritic cell interactions, RANKL also stimulates the maturation and activation of bone-resorbing osteoclasts. Given that lipid oxidation products mediate inflammatory and metabolic disorders such as osteoporosis and atherosclerosis, and since oxidized lipids affect several T lymphocyte functions, we hypothesized that RANKL production might also be subject to modulation by oxidized lipids. Here, we show that short term exposure of both unstimulated and activated human T lymphocytes to minimally oxidized low density lipoprotein (LDL), but not native LDL, significantly enhances RANKL production and promotes expression of the lectin-like oxidized LDL receptor-1 (LOX-1). The effect, which is also observed with 8-iso-Prostaglandin E2, an inflammatory isoprostane produced by lipid peroxidation, is mediated via the NFkappaB pathway, and involves increased RANKL mRNA expression. The link between oxidized lipids and T lymphocytes is further reinforced by analysis of hyperlipidemic mice, in which bone loss is associated with increased RANKL mRNA in T lymphocytes and elevated RANKL serum levels. Our results suggest a novel pathway by which T lymphocytes contribute to bone changes, namely, via oxidized lipid enhancement of RANKL production. These findings may help elucidate clinical associations between cardiovascular disease and decreased bone mass, and may also lead to new immune-based approaches to osteoporosis.

  10. The Association between Hearing Loss, Postural Control, and Mobility in Older Adults: A Systematic Review.

    Science.gov (United States)

    Agmon, Maayan; Lavie, Limor; Doumas, Michail

    2017-06-01

    Degraded hearing in older adults has been associated with reduced postural control and higher risk of falls. Both hearing loss (HL) and falls have dramatic effects on older persons' quality of life (QoL). A large body of research explored the comorbidity between the two domains. The aim of the current review is to describe the comorbidity between HL and objective measures of postural control, to offer potential mechanisms underlying this relationship, and to discuss the clinical implications of this comorbidity. PubMed and Google Scholar were systematically searched for articles published in English up until October 15, 2015, using combinations of the following strings and search words: for hearing: Hearing loss, "Hearing loss," hearing, presbycusis; for postural control: postural control, gait, postural balance, fall, walking; and for age: elderly, older adults. Of 211 screened articles, 7 were included in the systematic review. A significant, positive association between HL and several objective measures of postural control was found in all seven studies, even after controlling for major covariates. Severity of hearing impairment was connected to higher prevalence of difficulties in walking and falls. Physiological, cognitive, and behavioral processes that may influence auditory system and postural control were suggested as potential explanations for the association between HL and postural control. There is evidence for the independent relationship between HL and objective measures of postural control in the elderly. However, a more comprehensive understanding of the mechanisms underlying this relationship is yet to be elucidated. Concurrent diagnosis, treatment, and rehabilitation of these two modalities may reduce falls and increase QoL in older adults. American Academy of Audiology

  11. Hydrodynamic control of phytoplankton loss to the benthos in an estuarine environment

    Science.gov (United States)

    Jones, Nicole L.; Thompson, Janet K.; Arrigo, Kevin R.; Monismith, Stephen G.

    2009-01-01

    Field experiments were undertaken to measure the influence of hydrodynamics on the removal of phytoplankton by benthic grazers in Suisun Slough, North San Francisco Bay. Chlorophyll a concentration boundary layers were found over beds inhabited by the active suspension feeders Corbula amurensis and Corophium alienense and the passive suspension feeders Marenzellaria viridis and Laonome sp. Benthic losses of phytoplankton were estimated via both the control volume and the vertical flux approach, in which chlorophyll a concentration was used as a proxy for phytoplankton biomass. The rate of phytoplankton loss to the bed was positively correlated to the bed shear stress. The maximum rate of phytoplankton loss to the bed was five times larger than estimated by laboratory-derived pumping rates for the active suspension feeders. Reasons for this discrepancy are explored including a physical mechanism whereby phytoplankton is entrained in a near-bed fluff layer where aggregation is mediated by the presence of mucus produced by the infaunal community.

  12. Aircraft Loss-of-Control: Analysis and Requirements for Future Safety-Critical Systems and Their Validation

    Science.gov (United States)

    Belcastro, Christine M.

    2011-01-01

    Loss of control remains one of the largest contributors to fatal aircraft accidents worldwide. Aircraft loss-of-control accidents are complex, resulting from numerous causal and contributing factors acting alone or more often in combination. Hence, there is no single intervention strategy to prevent these accidents. This paper summarizes recent analysis results in identifying worst-case combinations of loss-of-control accident precursors and their time sequences, a holistic approach to preventing loss-of-control accidents in the future, and key requirements for validating the associated technologies.

  13. Fission product source from Ignalina NPP in case of loss-of-coolant accidents

    International Nuclear Information System (INIS)

    Ubonavicius, E.; Rimkevicius, S.

    2001-01-01

    The release of radioactive materials to the environment is of special importance in the case of any accident at Nuclear Power Plants (NPP). The integrated analysis of thermal-hydraulic parameters behavior and radioactive fission products (FP) transport and deposition in the compartments play an important role in the evaluation of FP release to the environment and determines the irradiation dozes of personnel and public. In this report the transport and the deposition of radioactive material in the Ignalina NPP unit 1 compartments as well as the FP source term to the environment in the case of design basis loss-of-coolant accidents are discussed. The calculation models for the evaluation of FP transport and deposition as well as the results of performed calculations of several accidents at Ignalina NPP are presented. (author)

  14. What distinguishes weight loss maintainers of the German Weight Control Registry from the general population?

    Science.gov (United States)

    Feller, Silke; Müller, Astrid; Mayr, Andreas; Engeli, Stefan; Hilbert, Anja; de Zwaan, Martina

    2015-05-01

    Differences between successful long-term weight loss maintainers and the general population with regard to eating and weighing habits, non-normative eating behaviors, and eating-related and general psychopathological parameters are unknown. Self-identified weight loss maintainers from the German Weight Control Registry (GWCR, n = 494) were compared with a representative sample of the general German population (n = 2,129). The samples did not differ in current BMI. Using the same assessment instruments in both cohorts, a variety of eating-related and psychological variables were determined. The GWCR participants reported more self-weighing and higher eating frequency but less hot meal consumption and more eating-out-of-home. Binge eating, compensatory behaviors, and concerns about shape and weight were reported more often by successful weight loss maintainers. Scores of depression and worrying about health were slightly higher whereas severity of somatic symptoms was less pronounced in the GWCR participants. Overall, our data suggest that successful weight loss maintainers are characterized by more concerns about shape and weight, greater binge eating frequency, and higher use of compensatory behaviors. The latter suggests that weight loss maintenance might not only be achieved by healthy strategies but also by non-normative behaviors which might increase the vulnerability for weight regain. © 2015 The Obesity Society.

  15. DWPF waste glass Product Composition Control System

    International Nuclear Information System (INIS)

    Brown, K.G.; Postles, R.L.

    1992-01-01

    The Defense Waste Processing Facility (DWPF) will be used to blend aqueous radwaste (PHA) with solid radwaste (Sludge) in a waste receipt vessel (the SRAT). The resulting SRAT material is transferred to the SME an there blended with ground glass (Frit) to produce a batch of melter feed slurry. The SME material is passed to a hold tank (the MFT) which is used to continuously feed the DWPF melter. The melter. The melter produces a molten glass wasteform which is poured into stainless steel canisters for cooling and, ultimately, shipment to and storage in a geologic repository. The Product Composition Control System (PCCS) is the system intended to ensure that the melt will be processible and that the glass wasteform will be acceptable. This document provides a description of this system

  16. How strongly does appetite counter weight loss? Quantification of the feedback control of human energy intake

    Science.gov (United States)

    Polidori, David; Sanghvi, Arjun; Seeley, Randy; Hall, Kevin D.

    2016-01-01

    Objective To quantify the feedback control of energy intake in response to long-term covert manipulation of energy balance in free-living humans. Methods We used a validated mathematical method to calculate energy intake changes during a 52 week placebo-controlled trial in 153 patients treated with canagliflozin, a sodium glucose co-transporter inhibitor that increases urinary glucose excretion thereby resulting in weight loss without patients being directly aware of the energy deficit. We analyzed the relationship between the body weight time course and the calculated energy intake changes using principles from engineering control theory. Results We discovered that weight loss leads to a proportional increase in appetite resulting in eating above baseline by ~100 kcal/day per kg of lost weight – an amount more than 3-fold larger than the corresponding energy expenditure adaptations. Conclusions While energy expenditure adaptations are often thought to be the main reason for slowing of weight loss and subsequent regain, feedback control of energy intake plays an even larger role and helps explain why long-term maintenance of a reduced body weight is so difficult. PMID:27804272

  17. The impact of dry matter loss during herbaceous biomass storage on net greenhouse gas emissions from biofuels production

    International Nuclear Information System (INIS)

    Emery, Isaac R.; Mosier, Nathan S.

    2012-01-01

    Life cycle inventory models of greenhouse gas emissions from biofuel production have become tightly integrated into government mandates and other policies to encourage biofuel production. Current models do not include life cycle impacts of biomass storage or reflect current literature on emissions from soil and biomass decomposition. In this study, the GREET model framework was used to determine net greenhouse gas emissions during ethanol production from corn and switchgrass via three biomass storage systems: wet ensiling of whole corn, and indoor and outdoor dry bale storage of corn stover and switchgrass. Dry matter losses during storage were estimated from the literature and used to modify GREET inventory analysis. Results showed that biomass stability is a key parameter affecting fuel production per farmed hectare and life cycle greenhouse gas emissions. Corn silage may generate 5358 L/ha of ethanol at 26.5 g CO 2 eq/MJ, relative to 5654 L/ha at 52.3 g CO 2 eq/MJ from combined corn stover and conventional grain corn ethanol production, or 3919 L/ha at 21.3 g CO 2 eq/MJ from switchgrass. Dry matter losses can increase net emissions by 3–25% (ensiling), 5–53% (bales outdoors), or 1–12% (bales indoors), decreasing the net GHG reduction of ethanol over gasoline by up to 10.9%. Greater understanding of biomass storage losses and greenhouse gas fluxes during storage is necessary to accurately assess biomass storage options to ensure that the design of biomass supply logistics systems meet GHG reduction mandates for biofuel production. -- Highlights: ► Analyzed the impact of biomass loss during storage. ► Probable dry matter losses strongly depend on storage method and infrastructure. ► Assessed impact of storage losses on LCA for cellulosic ethanol production. ► Storage losses increase GHG emissions by 1–53% depending upon storage conditions.

  18. Weighing every day matters: daily weighing improves weight loss and adoption of weight control behaviors.

    Science.gov (United States)

    Steinberg, Dori M; Bennett, Gary G; Askew, Sandy; Tate, Deborah F

    2015-04-01

    Daily weighing is emerging as the recommended self-weighing frequency for weight loss. This is likely because it improves adoption of weight control behaviors. To examine whether weighing every day is associated with greater adoption of weight control behaviors compared with less frequent weighing. Longitudinal analysis of a previously conducted 6-month randomized controlled trial. Overweight men and women in Chapel Hill, NC, participated in the intervention arm (N=47). The intervention focused on daily weighing for weight loss using an e-scale that transmitted weights to a study website, along with weekly e-mailed lessons and tailored feedback on daily weighing adherence and weight loss progress. We gathered objective data on self-weighing frequency from the e-scales. At baseline and 6 months, weight change was measured in the clinic and weight control behaviors (total items=37), dietary strategies, and calorie expenditure from physical activity were assessed via questionnaires. Calorie intake was assessed using an online 24-hour recall tool. We used χ(2) tests to examine variation in discrete weight control behaviors and linear regression models to examine differences in weight, dietary strategies, and calorie intake and expenditure by self-weighing frequency. Fifty-one percent of participants weighed every day (n=24) over 6 months. The average self-weighing frequency among those weighing less than daily (n=23) was 5.4±1.2 days per week. Daily weighers lost significantly more weight compared with those weighing less than daily (mean difference=-6.1 kg; 95% CI -10.2 to -2.1; P=0.004). The total number of weight control behaviors adopted was greater among daily weighers (17.6±7.6 vs 11.2±6.4; P=0.004). There were no differences by self-weighing frequency in dietary strategies, calorie intake, or calorie expenditure. Weighing every day led to greater adoption of weight control behaviors and produced greater weight loss compared with weighing most days of the

  19. Vaping to lose weight: Predictors of adult e-cigarette use for weight loss or control.

    Science.gov (United States)

    Morean, Meghan E; Wedel, Amelia V

    2017-03-01

    Some traditional cigarette smokers are motivated to smoke to lose weight or control their weight. The current study evaluated whether a subset of adult e-cigarette users reported vaping to lose or control their weight and examined potential predictors of vaping for weight management. Adult e-cigarette users (n=459) who reported wanting to lose weight or maintain their weight completed an anonymous online survey. Participants reported on demographics, vaping frequency, e-cigarette nicotine content, cigarette smoking status, preferred e-cigarette/e-liquid flavors, current weight status (i.e., overweight, underweight), use of dieting strategies associated with anorexia and bulimia, lifetime history of binge eating, self-discipline, and impulse control. Binary logistic regression was used to examine whether vaping for weight loss/control was associated with the aforementioned variables. Participants who reported vaping for weight loss/control (13.5%) were more likely to vape frequently (adjOR=1.15; 95% CI [1.00, 1.31]); be overweight (adjOR=2.80; [1.33, 5.90]); restrict calories (adjOR=2.23; [1.13, 4.42]); have poor impulse control (adjOR=0.59; [0.41, 0.86]); and prefer coffee- (adjOR=2.92; [1.47, 5.80]) or vanilla-flavored e-liquid (adjOR=7.44; [1.56, 36.08]). A subset of adult e-cigarette users reported vaping for weight loss/control, raising concerns about expanded, scientifically unsubstantiated uses of e-cigarettes. Identifying where individuals obtain information about vaping for weight loss (e.g., e-cigarette ads, Internet) and whether weight-related motives promote e-cigarette initiation among e-cigarette naïve individuals is important to informing regulatory efforts. Further research also is needed to better understand the link between e-liquid flavors and weight loss motivations. Copyright © 2016 Elsevier Ltd. All rights reserved.

  20. 21 CFR 820.70 - Production and process controls.

    Science.gov (United States)

    2010-04-01

    ...) MEDICAL DEVICES QUALITY SYSTEM REGULATION Production and Process Controls § 820.70 Production and process... used as part of production or the quality system, the manufacturer shall validate computer software for... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Production and process controls. 820.70 Section...

  1. Weight-loss intervention using implementation intentions and mental imagery: a randomised control trial study protocol

    OpenAIRE

    Hattar, Anne; Hagger, Martin S; Pal, Sebely

    2015-01-01

    Background Overweight and obesity are major health problems worldwide. This protocol describes the HEALTHI (Healthy Eating and Active LifesTyle Health Intervention) Program, a 12-week randomised-controlled weight-loss intervention that adopts two theory-based intervention techniques, mental imagery and implementation intentions, a behaviour-change technique based on planning that have been shown to be effective in promoting health-behaviour change in previous research. The effectiveness of go...

  2. Loss of control eating and weight outcomes after bariatric surgery: a study with a Portuguese sample

    OpenAIRE

    Conceição, Eva Martins; Silva, Ana Isabel Pinto Bastos Leite; Brandão, Isabel; Vaz, Ana Rita Rendeiro Ribeiro; Ramalho, Sofia Marlene Marques; Arrojado, Filipa; Costa, José; Machado, Paulo P. P.

    2014-01-01

    The present study aim is to investigate the frequency of loss of control eating (LOC) episodes in three groups with different assessment times: one before, one at short and one at long-term after bariatric surgery; as well as to explore the association of postoperative problematic eating behaviors and weight outcomes and psychological characteristics. This cross-sectional study compared a group of preoperative bariatric surgery patients (n = 176) and two postoperative groups, one at short-ter...

  3. Stabilization of a Wireless Networked Control System with Packet Loss and Time Delay: An ADS Approach

    Directory of Open Access Journals (Sweden)

    Jing Wang

    2012-01-01

    Full Text Available The stabilization problem of a wireless networked control system is considered in this paper. Both time delay and packet loss exist simultaneously in the wireless network. The system is modeled as an asynchronous dynamic system (ADS with unstable subsystems. A sufficient condition for the system to be stable is presented. A numerical example is given to demonstrate the effectiveness of the proposed approach.

  4. Productivity loss due to overweight and obesity: a systematic review of indirect costs.

    Science.gov (United States)

    Goettler, Andrea; Grosse, Anna; Sonntag, Diana

    2017-10-05

    The increasingly high levels of overweight and obesity among the workforce are accompanied by a hidden cost burden due to losses in productivity. This study reviews the extent of indirect cost of overweight and obesity. A systematic search was conducted in eight electronic databases (PubMed, Cochrane Library, Web of Science Core Collection, PsychInfo, Cinahl, EconLit and ClinicalTrial.gov). Additional studies were added from reference lists of original studies and reviews. Studies were eligible if they were published between January 2000 and June 2017 and included monetary estimates of indirect costs of overweight and obesity. The authors reviewed studies independently and assessed their quality. Of the 3626 search results, 50 studies met the inclusion criteria. A narrative synthesis of the reviewed studies revealed substantial costs due to lost productivity among workers with obesity. Especially absenteeism and presenteeism contribute to high indirect costs. However, the methodologies and results vary greatly, especially regarding the cost of overweight, which was even associated with lower indirect costs than normal weight in three studies. The evidence predominantly confirms substantial short-term and long-term indirect costs of overweight and obesity in the absence of effective customised prevention programmes and thus demonstrates the extent of the burden of obesity beyond the healthcare sector. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

  5. Pest control in stored products using diatomaceous earth

    Directory of Open Access Journals (Sweden)

    Fetyukhina E.G.

    2017-05-01

    Full Text Available in the All-Russian Plant Quarantine Center the DEBUZZZER, dried diatomite powder of light beige color, has been presented by the Diamix Company for official testing in order to obtain the state registration of the Ministry of Agriculture. This article presents the results of laboratory studies of the DEBUZZZER preparation based on the diatomite against pests of stocks while processing wheat grain. It also shows the effectiveness of the DEBUZZZER against adult species of grain and rice weevils, their total death occurred on the 6th and 14th days accordingly, and the weight loss was up to 50%. The authors present the susceptibility to this drug by the imago of large and small meal worm, which was used to process the grain, and it caused 100% mortality on the 6th and 14th days and a decrease in the weight of test objects by 41.8 and 60.6%, accordingly. The vital activity of the larvae of the yellow mealworm beetle has decreased as a result of weight loss by 41.8%. However, the larvae remained viable and developed till pupal stage and imago despite weight loss, and death was indicated in only 6.7% of the species. The DEBUZZZER diatom powder implementation was not effective enough against the larvae of two species of Trogodermaspp.: khapra beetle and warehouse beetle, their mortality was 11.7 and 3.3% on the 20th day, accordingly. According to the authors, more frequent processing of the stored products is necessary for successful pest control.

  6. The role of lifestyle, health, and work in educational inequalities in sick leave and productivity loss at work.

    Science.gov (United States)

    Robroek, Suzan J W; van Lenthe, Frank J; Burdorf, Alex

    2013-08-01

    To investigate the influence of lifestyle, health, and work conditions in the association between education and productivity loss at work and sick leave. Employees of six companies filled out a questionnaire on demographics, lifestyle-related, health, and work-related factors, and productivity loss at work and sick leave at baseline (n = 915) and after 1-year (n = 647). Employees with a low education were more likely to report productivity loss at work (OR = 1.49, 95 % CI 0.98-2.26) and sick leave (OR = 1.81, 95 % CI 1.15-2.85). After adjustment for lifestyle, health, and work conditions, the association between education and productivity loss at work did not attenuate. Work conditions attenuated the association between low education and sick leave (OR = 1.62, 95 % CI 1.01-2.61), and additional adjustment for health and lifestyle-related factors further reduced the strength of the association (OR = 1.42, 95 % CI 0.86-2.34). Work conditions and lifestyle-related factors partly explained the association between education and sick leave, but did not influence the association between education and productivity loss at work. The educational differences in sick leave prompt for interventions that address behavioral aspects as well as work-related and lifestyle-related factors.

  7. Association between product quality control and process quality control of bulk milk

    NARCIS (Netherlands)

    Velthuis, A.; Asseldonk, van M.A.P.M.

    2010-01-01

    Assessment of dairy-milk quality is based on product quality control (testing bulk-milk samples) and process quality control (auditing dairy farms). It is unknown whether process control improves product quality. To quantify possible association between product control and process control a

  8. Spectrometric control of radionuclides production parameters

    International Nuclear Information System (INIS)

    Zhuk, I.; Potarenko, A.; Yarochevich, O.; Hluboky, N.; Kerko, P.; Bogdanov, V.; Dyatel, N.

    2006-01-01

    Full text: A radioactive preparations and sources are widely used all over the world for scientific, industrial and medical purposes. These preparations in Belarus are planned to produce by the Joint Belarussian-Russian Closed Joint Stock Company 'Isotope technologies' (CJSC IT). The company was created in 1998 by two leading scientific centers-SSI 'Joint Institute of Power and Nuclear Research-Sosny' the National Academy of Sciences of Belarus and the State Center of Science of the Russian Federation 'Scientific research institute of nuclear reactors'. One of the mainstream directions in CJSC IT activities is production of radioactive preparations for the industrial and scientific application (such as 133 Ba, 109 Cd, 63 Ni, 60 Co) and for the medical purposes (such as 19 '2Ir, 60 Co). All radioactive preparations have a good export potential and adequate to modern technical and consumer requirements. X-γ spectrometric analysis of considered radioactive sources is one of the basic methods for quality control of radioactive sources. At present, we are developing x-γ spectrometric support of purification process from contaminating radionuclides of 109 Cd -γ preparation and 63 Ni - β preparation. Work on x-γ spectrometric quality control of 133 Ba preparation is carried out. The description of the used equipment is given. Techniques of contaminating radionuclides determination (contents ∼10 - '6 from activity of the basic radionuclide) are presented. Problems of the choice of geometry of measurements of sources with activity about 10 7 -10 9 Bq and possible sources of errors are discussed. (author)

  9. Fuzzy-TLBO optimal reactive power control variables planning for energy loss minimization

    International Nuclear Information System (INIS)

    Moghadam, Ahmad; Seifi, Ali Reza

    2014-01-01

    Highlights: • A new approach to the problem of optimal reactive power control variables planning is proposed. • The energy loss minimization problem has been formulated by modeling the load of system as a Load Duration Curve. • To solving the energy loss problem, the classic methods and the evolutionary methods are used. • A new proposed fuzzy teaching–learning based algorithm is applied to energy loss problem. • Simulations are done to show the effectiveness and superiority of the proposed algorithm compared with other methods. - Abstract: This paper offers a new approach to the problem of optimal reactive power control variables planning (ORPVCP). The basic idea is division of Load Duration Curve (LDC) into several time intervals with constant active power demand in each interval and then solving the energy loss minimization (ELM) problem to obtain an optimal initial set of control variables of the system so that is valid for all time intervals and can be used as an initial operating condition of the system. In this paper, the ELM problem has been solved by the linear programming (LP) and fuzzy linear programming (Fuzzy-LP) and evolutionary algorithms i.e. MHBMO and TLBO and the results are compared with the proposed Fuzzy-TLBO method. In the proposed method both objective function and constraints are evaluated by membership functions. The inequality constraints are embedded into the fitness function by the membership function of the fuzzy decision and the problem is modeled by fuzzy set theory. The proposed Fuzzy-TLBO method is performed on the IEEE 30 bus test system by considering two different LDC; and it is shown that using this method has further minimized objective function than original TLBO and other optimization techniques and confirms its potential to solve the ORPCVP problem with considering ELM as the objective function

  10. Context dependency and saturating effects of loss of rare soil microbes on plant productivity

    NARCIS (Netherlands)

    Hol, Gera; De Boer, Wietse; de Hollander, Mattias; Kuramae, Eiko Eurya; Meisner, Annelein; van der Putten, Wim

    2015-01-01

    Land use intensification is associated with loss of biodiversity and altered ecosystem functioning. Until now most studies on the relationship between biodiversity and ecosystem functioning focused on random loss of species, while loss of rare species that usually are the first to disappear received

  11. Adolescent exergame play for weight loss and psychosocial improvement: a controlled physical activity intervention.

    Science.gov (United States)

    Staiano, Amanda E; Abraham, Anisha A; Calvert, Sandra L

    2013-03-01

    Overweight and obese youth, who face increased risk of medical complications including heart disease and type II diabetes, can benefit from sustainable physical activity interventions that result in weight loss. This study examined whether a 20-week exergame (i.e., videogame that requires gross motor activity) intervention can produce weight loss and improve psychosocial outcomes for 54 overweight and obese African-American adolescents. Participants were recruited from a public high school and randomly assigned to competitive exergame, cooperative exergame, or control conditions. All exergame participants were encouraged to play the Nintendo Wii Active game for 30-60 min per school day in a lunch-time or after-school program. Cooperative exergame participants worked with a peer to expend calories and earn points together, whereas competitive exergame participants competed against a peer. Control participants continued regular daily activities. Outcome measures included changes in weight, peer support, self-efficacy, and self-esteem, measured at baseline, and at ∼10 and 20 weeks. Growth curve analysis revealed that cooperative exergame players lost significantly more weight (mean = 1.65 kg; s.d. = 4.52) than the control group, which did not lose weight. The competitive exergame players did not differ significantly from the other conditions. Cooperative exergame players also significantly increased in self-efficacy compared to the control group, and both exergame conditions significantly increased in peer support more than the control group. Exergames, especially played cooperatively, can be an effective technological tool for weight loss among youth. Copyright © 2012 The Obesity Society.

  12. Catch crops as universal and effective method for reducing nitrogen leaching loss in spring cereal production: A meta-analysis.

    Science.gov (United States)

    Valkama, Elena; Lemola, Riitta; Känkänen, Hannu; Turtola, Eila

    2016-04-01

    Sustainable farms produce adequate amounts of a high-quality product, protect their resources and are both environmentally friendly and economically profitable. Nitrogen (N) fertilization decisively influences the cereal yields as well as increases soil N balance (N input in fertilizer - N output in harvested yield), thereby leading to N losses to the environment. However, while N input reduction affects soil N balance, such approach would markedly reduce N leaching loss only in case of abnormally high N balances. As an alternative approach, the growing of catch crops aims to prevent nutrient leaching in autumn after harvest and during the following winter, but due to competition, catch crops may also reduce yields of the main crop. Although studies have explored the environmental effects of catch crops in cereal production in the Nordic countries (Denmark, Sweden, Finland and Norway) during the past 40 years, none has yet carried out a meta-analysis. We quantitatively summarized 35 studies on the effect of catch crops (non-legume and legume) undersown in spring cereals on N leaching loss or its risk as estimated by the content of soil nitrate N or its sum with ammonium in late autumn. The meta-analysis also included the grain yield and N content of spring cereals. To identify sources of variation, we studied the effects of soil texture and management (ploughing time, the amount of N applied, fertilizer type), as well as climatic (annual precipitation) and experimental conditions (duration of experiments, lysimeter vs. field experiments). Finally, we examined whether the results differed between the countries or over the decades. Compared to control groups with no catch crops, non-legume catch crops, mainly ryegrass species, reduced N leaching loss by 50% on average, and soil nitrate N or inorganic N by 35% in autumn. Italian ryegrass depleted soil N more effectively (by 60%) than did perennial ryegrass or Westerwolds ryegrass (by 25%). In contrast, legumes (white

  13. Who responds to financial incentives for weight loss? Evidence from a randomized controlled trial.

    Science.gov (United States)

    Paloyo, Alfredo R; Reichert, Arndt R; Reuss-Borst, Monika; Tauchmann, Harald

    2015-11-01

    There is a paucity of evidence on the heterogeneous impacts of financial incentives on weight loss. Between March 2010 and January 2012, in a randomized controlled trial, we assigned 700 obese persons to three experimental arms. We test whether particular subgroups react differently to financial incentives for weight loss. Two treatment groups obtained a cash reward (€150 and €300 with 237 and 229 participants, respectively) for achieving an individually-assigned target weight within four months; the control group (234 participants) was not incentivized. Participants and administrators were not blinded to the intervention. We find that monetary rewards effectively induced obese individuals to reduce weight across all subgroups. However, there is no evidence for treatment-effect heterogeneity for those groups that were incentivized. Among those who were in the €300 group, statistically significant and large weight losses were observed for women, singles, and those who are not working (all above 4 kg in four months). In addition, the magnitude of the reward matters only for women and migrants. The effectiveness of financial incentives to reduce weight nevertheless raises sensitive ethical issues that should be taken into consideration by policymakers. Copyright © 2015 Elsevier Ltd. All rights reserved.

  14. Obesity: locus of control, body image, weight loss, and age-at-onset.

    Science.gov (United States)

    Wineman, N M

    1980-01-01

    In a retrospective investigation designed to measure locus of control, body image, and weight loss in Overeaters Anonymous members who had childhood, adolescence, or adulthood onset of obesity, 116 subjects were grouped according to age at onset of obesity and the year they joined OA. A convenience, volunteer sample of OA members completed a demographic data questionnaire, Rotter's Social Reaction. Inventory, and Secord and Jourard's Body Cathexis Scale. Significant overweight percentage differences were not found when the three age-at-onset groups were compared. Significant differences emerged, however, for adolescent-onset group persons who were categorized as "old" members; they had a larger weight loss and were more satisfied with their body image. A positive linear relationship between greater perception of internal control and a good body image was found in the entire adulthood-onset group. Weight loss and good body image of the oldest adolescent-onset group probably was the outcome of their association with a self-help group i.e., OA. Assessment of developmental issues related to the time of initial weight gain may indicate which treatment regime would be most effective.

  15. Stochastic ℋ∞ Finite-Time Control of Discrete-Time Systems with Packet Loss

    Directory of Open Access Journals (Sweden)

    Yingqi Zhang

    2012-01-01

    Full Text Available This paper investigates the stochastic finite-time stabilization and ℋ∞ control problem for one family of linear discrete-time systems over networks with packet loss, parametric uncertainties, and time-varying norm-bounded disturbance. Firstly, the dynamic model description studied is given, which, if the packet dropout is assumed to be a discrete-time homogenous Markov process, the class of discrete-time linear systems with packet loss can be regarded as Markovian jump systems. Based on Lyapunov function approach, sufficient conditions are established for the resulting closed-loop discrete-time system with Markovian jumps to be stochastic ℋ∞ finite-time boundedness and then state feedback controllers are designed to guarantee stochastic ℋ∞ finite-time stabilization of the class of stochastic systems. The stochastic ℋ∞ finite-time boundedness criteria can be tackled in the form of linear matrix inequalities with a fixed parameter. As an auxiliary result, we also give sufficient conditions on the robust stochastic stabilization of the class of linear systems with packet loss. Finally, simulation examples are presented to illustrate the validity of the developed scheme.

  16. Loss of integrated control system power and overcooling transient at Rancho Seco on December 26, 1985

    International Nuclear Information System (INIS)

    1986-02-01

    On December 26, 1985, Rancho Seco Nuclear Generating Station, located in Clay, California, about 25 miles southeast of Sacramento, experienced a loss of dc power within the integrated control system (ICS) while the plant was operating at 76% power. The plant is owned by the Sacramento Municipal Utility District (SMUD). Following the loss of ICS dc power, the reactor tripped on high reactor coolant system (RCS) pressure followed by a rapid overcooling transient and automatic initiation of the safety features actuation system on low RCS pressure. The overcooling transient continued until ICS dc power was restored 26 minutes after its loss. The fundamental causes for this transient were design weaknesses and vulnerabilities in the ICS and in the equipment controlled by that system. These weaknesses and vulnerabilities were not adequately compensated by other design features, plant procedures or operator training. These weaknesses and vulnerabilities were largely known to SMUD and the NRC staff by virtue of a number of precursor events and through related analyses and studies. Yet, adequate plant modifications were not made so that this event would be improbable, or so that its course or consequences would be altered significantly. The information was available and known which could have prevented this overcooling transient; but in the absence of adequate plant modifications, the incident should have been expected. The report includes findings and conclusions of the NRC Incident Investigation Team sent to Rancho Seco by the NRC Executive Director for Operations in conformance with NRC's recently established Incident Investigation Program. 33 figs

  17. Stop of loss of cognitive performance during rehabilitation after total hip arthroplasty-prospective controlled study.

    Science.gov (United States)

    Brem, Matthias H; Lehrl, Siegfried; Rein, Anna K; Massute, Sylvia; Schulz-Drost, Stefan; Gelse, Kolja; Schlechtweg, Phillip M; Hennig, Friedrich F; Olk, Alexander; Jacob, Harald J; Gusinde, Johannes

    2010-01-01

    Prolonged hospitalization is known to be associated with a loss of cognitive performance. Does playing video games (VGs) developed to improve cognitive properties delay this loss or even lead to an increase in cognitive performance? We performed a 10-day longitudinal study of patients who received total hip arthroplasty. We compared 16 patients (6 male) aged 66 ± 9 years (mean ± standard deviation) who played Dr. Kawashima's Brain Training: How Old Is Your Brain? (Nintendo; Redmond, Washington) on a Nintendo DS handheld console with 16 control patients (6 male) aged 69 ± 14 years. We measured cognitive performance 1 day preoperation, as well as on days 2 and 9 postoperation. With the daily exercise of a specific VG by the play group, the patients' fluid intelligence (median intelligence quotient 99-106), working memory capacity, and rate of information processing significantly improved over the course of 7 postoperative days. The cognitive performance of the control group did not increase. However, the memory spans of both groups did not systematically change. Exercise with VGs can prevent the loss of cognitive performance during prolonged hospitalization.

  18. Acute alcohol effects on inhibitory control and implicit cognition: implications for loss of control over drinking

    NARCIS (Netherlands)

    Field, M.; Wiers, R.W.; Christiansen, P.; Fillmore, M.T.; Verster, J.C.

    2010-01-01

    Alcohol impairs inhibitory control, and it alters implicit alcohol cognitions including attentional bias and implicit associations. These effects are seen after doses of alcohol which do not lead to global impairments in cognitive performance. We review studies which demonstrate that the effects of

  19. The Breathe Easier through Weight Loss Lifestyle (BE WELL Intervention: A randomized controlled trial

    Directory of Open Access Journals (Sweden)

    Buist A

    2010-03-01

    Full Text Available Abstract Background Obesity and asthma have reached epidemic proportions in the US. Their concurrent rise over the last 30 years suggests that they may be connected. Numerous observational studies support a temporally-correct, dose-response relationship between body mass index (BMI and incident asthma. Weight loss, either induced by surgery or caloric restriction, has been reported to improve asthma symptoms and lung function. Due to methodological shortcomings of previous studies, however, well-controlled trials are needed to investigate the efficacy of weight loss strategies to improve asthma control in obese individuals. Methods/Design BE WELL is a 2-arm parallel randomized clinical trial (RCT of the efficacy of an evidence-based, comprehensive, behavioral weight loss intervention, focusing on diet, physical activity, and behavioral therapy, as adjunct therapy to usual care in the management of asthma in obese adults. Trial participants (n = 324 are patients aged 18 to 70 years who have suboptimally controlled, persistent asthma, BMI between 30.0 and 44.9 kg/m2, and who do not have serious comorbidities (e.g., diabetes, heart disease, stroke. The 12-month weight loss intervention to be studied is based on the principles of the highly successful Diabetes Prevention Program lifestyle intervention. Intervention participants will attend 13 weekly group sessions over a four-month period, followed by two monthly individual sessions, and will then receive individualized counseling primarily by phone, at least bi-monthly, for the remainder of the intervention. Follow-up assessment will occur at six and 12 months. The primary outcome variable is the overall score on the Juniper Asthma Control Questionnaire measured at 12 months. Secondary outcomes include lung function, asthma-specific and general quality of life, asthma medication use, asthma-related and total health care utilization. Potential mediators (e.g., weight loss and change in physical

  20. ITER safety studies: The effect of two simultaneous perturbations during a loss of plasma control transient

    International Nuclear Information System (INIS)

    Rivas, J.C.; Dies, J.

    2014-01-01

    Highlights: •We have re-examined the methodology employed in the analysis of the “Loss of plasma transients in ITER” safety reference events. •We show the possible transient effects of a combined malfunction in external heating system and change in plasma confinement. •We show the possible transient effects of a combined malfunction in fuelling system and change in plasma confinement. •We have shown that new steady-states can be achieved that are potentially dangerous for the wall integrity. -- Abstract: The loss of plasma control events in ITER are safety cases investigated to give an upper bound of the worse effects foreseeable from a total failure of the plasma control function. Conservative analyses based on simple 0D models for plasma balance equations and 1D models for wall heat transfer are used to determine the effects of such transients on wall integrity from a thermal point of view. In this contribution, progress in a “two simultaneous perturbations over plasma” approach to the analysis of the loss of plasma control transients in ITER is presented. The effect of variation in confinement time is now considered, and the consequences of this variation are shown over a n–T diagram. The study has been done with the aid of AINA 3.0 code. This code implements the same 0D plasma-1D wall scheme used in previous LOPC studies. The rationale of this study is that, once the occurrence of a loss of plasma transient has been assumed, and due to the uncertainties in plasma physics, it does not seem so unlikely to assume the possibility of finding a new confinement mode during the transient. The cases selected are intended to answer to the question “what would happen if an unexpected change in plasma confinement conditions takes place during a loss of plasma control transient due to a simultaneous malfunction of heating, or fuelling systems?” Even taking into account the simple models used and the uncertainties in plasma physics and design data, the

  1. The association between chronic conditions and non-agricultural work productivity loss among the middle-aged Chinese population.

    Science.gov (United States)

    Zhang, Wei; Sun, Huiying; Li, Xin

    2018-05-03

    To measure the association between different chronic conditions and non-agricultural work productivity loss among the middle-aged Chinese population. We used 2011, 2013 and 2015 data from the China Health and Retirement Longitudinal Study. The study focused on middle-aged respondents who had the potential to work in the non-agricultural sector. Work productivity loss was measured by non-agricultural work participation and number of absent workdays among those conducting non-agricultural work. Seven different chronic conditions were considered. Heart diseases had the strongest association with lower work participation for men and women. Stomach/digestive disease and arthritis/rheumatism were conditions with the largest incremental absent workdays for men and women, respectively. The associations with non-agricultural work productivity loss varied by chronic conditions, outcomes, and sex. The findings will help motivate chronic condition prevention/management programs and set priorities.

  2. Weight loss in a UK commercial all meal provision study: a randomised controlled trial.

    Science.gov (United States)

    Mellor, D D; Whitham, C; Goodwin, S; Morris, M; Reid, M; Atkin, S L

    2014-08-01

    Effective approaches are needed to address the increasing prevalence of overweight and obesity. The present study investigated whether all meal provision was a more effective and acceptable method for weight loss than a self-directed diet. This randomised controlled trial recruited 112 men and women with a body mass index in the range 27-35 kg m(-2), who had no comorbidities, from the local area of Hull. Participants were randomised to receive either meal provision or follow a self-directed diet for a 12-week period that resulted in an estimated 2928 kJ day(-1) (700 kcal day(-1)) deficit. A dietitian supervised both dietary interventions. At 12 weeks [mean (SEM)], percentage weight loss in the meal provision group was 6.6% (0.5%) compared to 4.3% (0.6%) for those on the self-directed diet. In terms of clinically relevant weight loss, 61% of participants lost 5% or more of their body weight with meal provision compared to 22% on the self-directed diet (P meal provision withdrawing from the study compared to 41% of those following the self-directed diet (P Meal provision was a more effective and accepted method for weight loss over a 12-week period compared to a self-directed diet. This may in part represent the difference between being given the meal provision food free of charge. However, longer-term maintenance studies need to be undertaken to ascertain their effects on the maintenance of weight loss. © 2013 The Authors. Journal of Human Nutrition and Dietetics published by John Wiley & Sons Ltd on behalf of British Dietetic Association Ltd.

  3. Loss-to-follow-up and delay to treatment initiation in Pakistan's national tuberculosis control programme.

    Science.gov (United States)

    Ali, Syed Mustafa; Naureen, Farah; Noor, Arif; Fatima, Irum; Viney, Kerri; Ishaq, Muhammad; Anjum, Naveed; Rashid, Aamna; Haider, Ghulam Rasool; Khan, Muhammad Aamir; Aamir, Javariya

    2018-03-09

    Researchers and policy-makers have identified loss to follow-up as a major programmatic problem. Therefore, the objective of this study is to quantify TB related pre-treatment loss to follow up and treatment delay in private sector health care facilities in Pakistan. This was a retrospective, descriptive cohort study using routinely collected programmatic data from TB referral, diagnosis and treatment registers. Data from 48 private healthcare facilities were collected using an online questionnaire prepared in ODK Collect, for the period October 2015 to March 2016. Data were analysed using SPSS. We calculated the: (1) number and proportion of patients who were lost to follow-up during the diagnostic period, (2) number and proportion of patients with pre-treatment loss to follow-up, and (3) the number of days between diagnosis and initiation of treatment. One thousand five hundred ninety-six persons with presumptive TB were referred to the laboratory. Of these, 96% (n = 1538) submitted an on-the-spot sputum sample. Of the 1538 people, 1462 (95%) people subsequently visited the laboratory to submit the early morning (i.e. the second) sample. Hence, loss to follow-up during the diagnostic process was 8% overall (n = 134). Of the 1462 people who submitted both sputum samples, 243 (17%) were diagnosed with sputum smear-positive pulmonary TB and 231 were registered for anti-TB treatment, hence, loss in the pre-treatment phase was 4.9% (n = 12). 152 persons with TB (66%) initiated TB treatment either on the day of TB diagnosis or the next day. A further 79 persons with TB (34%) commenced TB treatment within a mean time of 7 days (range 2 to 64 days). Concentrated efforts should be made by the National TB Control Programme to retain TB patients and innovative methods such as text reminders and behavior change communication may need to be used and tested.

  4. Tranexamic acid for control of blood loss in bilateral total knee replacement in a single stage

    Directory of Open Access Journals (Sweden)

    Mandeep S Dhillon

    2011-01-01

    Full Text Available Background: Tranexamic acid (TEA reduces blood loss and red cell transfusions in patients undergoing unilateral total knee arthroplasty (TKA. However, there is not much literature regarding the use of TEA in patients undergoing bilateral TKA in a single stage and the protocols for administration of TEA in such patients are ill-defined. Materials and Methods: We carried out a case control study evaluating the effect of TEA on postoperative hemoglobin (Hb, total drain output, and number of blood units transfused in 52 patients undergoing bilateral TKA in a single stage, and compared it with 56 matched controls who did not receive TEA. Two doses of TEA were administered in doses of 10 mg / kg each (slow intravenous (IV infusion, with the first dose given just before tourniquet release of the first knee and the second dose three hours after the first one. Results: A statistically significant reduction in the total drain output and requirement of allogenic blood transfusion in cases who received TEA, as compared to the controls was observed. The postoperative Hb and Hb at the time of discharge were found to be lower in the control group, and this result was found to be statistically significant. Conclusion: TEA administered in patients undergoing single stage bilateral TKA helped reduce total blood loss and decreased allogenic blood transfusion requirements. This might be particularly relevant, where facilities such as autologous reinfusion might not be available.

  5. Failure of Arm Movement Control in Stroke Patients, Characterized by Loss of Complexity.

    Science.gov (United States)

    Goh, Segun; Han, Kyungreem; Ryu, Jehkwang; Kim, Seonjin; Choi, MooYoung

    2015-01-01

    We study the mechanism of human arm-posture control by means of nonlinear dynamics and quantitative time series analysis methods. Utilizing linear and nonlinear measures in combination, we find that pathological tremors emerge in patient dynamics and serve as a main feature discriminating between normal and patient groups. The deterministic structure accompanied with loss of complexity inherent in the tremor dynamics is also revealed. To probe the underlying mechanism of the arm-posture dynamics, we further analyze the coupling patterns between joints and components, and discuss their roles in breaking of the organization structure. As a result, we elucidate the mechanisms in the arm-posture dynamics of normal subjects responding to the gravitational force and for the reduction of the dynamic degrees of freedom in the patient dynamics. This study provides an integrated framework for the origin of the loss of complexity in the dynamics of patients as well as the coupling structure in the arm-posture dynamics.

  6. Weight loss with a modified Mediterranean-type diet using fat modification: a randomized controlled trial.

    Science.gov (United States)

    Austel, A; Ranke, C; Wagner, N; Görge, J; Ellrott, T

    2015-08-01

    There is evidence that Mediterranean diets with a high proportion of olive oil and nuts can be effective for weight management and prevention of cardiovascular disease. It might be difficult for populations with other eating habits to follow such diets. Therefore, a modified Mediterranean-type diet using fat modification through neutral and butter-flavored canola oil, walnuts and walnut oil with two portion-controlled sweet daily snacks was tested in Germany. Randomized waiting-list control study with overweight/grade 1 obese subjects: 12-week self-help modified Mediterranean-type diet, 6 weeks of diet plans and 6 weeks of weight loss maintenance training. Trial duration was 12 months. Intervention group (IG) included 100 participants (average age of 52.4 years, weight 85.1 kg and body mass index (BMI) 30.1 kg/m(2)), waiting-list control group (CG) included 112 participants (52.6 years, 84.1 kg and 30.1 kg/m(2)). Per-protocol weight loss after 12 weeks was 5.2 kg in IG vs 0.4 kg in CG (P ⩽ 0.0001), BMI -1.8 vs -0.1 kg/m(2) (P ⩽ 0.0001), waist circumference -4.7 vs -0.9 cm (P ⩽ 0.0001). Triglycerides, total cholesterol and LDL cholesterol improved significantly in IG but not in CG. One-year dropouts: 44% in IG and 53% in CG. Weight loss after 12 months: 4.2 kg (pooled data). A five-meal modified Mediterranean-type diet with two daily portion-controlled sweet snacks was effective for weight management in a self-help setting for overweight and grade 1 obese subjects. Fat modification through canola oil, walnuts and walnut oil improved blood lipids even at 12 months.

  7. Farm management, not soil microbial diversity, controls nutrient loss from smallholder tropical agriculture

    Directory of Open Access Journals (Sweden)

    Stephen A Wood

    2015-03-01

    Full Text Available Tropical smallholder agriculture supports the livelihoods of over 900 million of the world’s poorest people. This form of agriculture is undergoing rapid transformation in nutrient cycling pathways as international development efforts strongly promote greater use of mineral fertilizers to increase crop yields. These changes in nutrient availability may alter the composition of microbial communities with consequences for rates of biogeochemical processes that control nutrient losses to the environment. Ecological theory suggests that altered microbial diversity will strongly influence processes performed by relatively few microbial taxa, such as denitrification and hence nitrogen losses as nitrous oxide, a powerful greenhouse gas. Whether this theory helps predict nutrient losses from agriculture depends on the relative effects of microbial community change and increased nutrient availability on ecosystem processes. We find that mineral and organic nutrient addition to smallholder farms in Kenya alters the taxonomic and functional diversity of soil microbes. However, we find that the direct effects of farm management on both denitrification and carbon mineralization are greater than indirect effects through changes in the taxonomic and functional diversity of microbial communities. Changes in functional diversity are strongly coupled to changes in specific functional genes involved in denitrification, suggesting that it is the expression, rather than abundance, of key functional genes that can serve as an indicator of ecosystem process rates. Our results thus suggest that widely used broad summary statistics of microbial diversity based on DNA may be inappropriate for linking microbial communities to ecosystem processes in certain applied settings. Our results also raise doubts about the relative control of microbial composition compared to direct effects of management on nutrient losses in applied settings such as tropical agriculture.

  8. Reducing losses inflicted by insect pests on cashew, using weaver ants as a biological control agent

    DEFF Research Database (Denmark)

    Anato, Florence; Wargui, Rosine; Sinzogan, Antonio

    2015-01-01

    BACKGROUND: Cashew (Anacardium occidentale Linnaeus) is the largest agricultural export product in Benin. However, yields and quality are lost due to inefficient pest control. Weaver ants (Oecophylla spp.) may control pests in this crop as they eat and deter pests. In Benin, cashew pest damages......, nut quality and yield were compared among: (i) trees with weaver ant (Oecophylla longinoda Latreille), (ii) trees where weaver ants were fed sugar, (iii) IPM trees with weaver ants combined with GF-120 (a natural insecticide), and (iv) control trees receiving no control measures. RESULTS: Thrips...... damages on nuts were higher than other damage symptoms and significantly lower on control trees compared to other treatments. Percentage of first quality nuts was higher in the control compared to ants treatments, but not different from the IPM-treatment. However, compared to the control treatment, ants...

  9. Facilitating the use of alternative capsid control methods towards sustainable production of organic cocoa in Ghana

    OpenAIRE

    Ayenor, G.K.; Huis, van, A.; Obeng-Ofori, D.; Padi, B.; Röling, N.G.

    2007-01-01

    Cocoa (Theobroma cacao L.) is an important foreign exchange earner for Ghana. However, production is constrained by a high incidence of pests and diseases. Based on farmers' needs, this study focused on the control of capsids, mainly Sahlbergella singularis Haglund and Distantiella theobroma (Distant) (both Hemiptera: Miridae). Annual crop loss caused by capsids is estimated at 25¿30%. To control capsids, formal research recommends application of synthetic insecticides four times between Augu...

  10. Biological control and sustainable food production

    NARCIS (Netherlands)

    Bale, J.S.; Lenteren, van J.C.; Bigler, F.

    2008-01-01

    The use of biological control for the management of pest insects pre-dates the modern pesticide era. The first major successes in biological control occurred with exotic pests controlled by natural enemy species collected from the country or area of origin of the pest (classical control).

  11. On-line iron loss resistance identification by a state observer for rotor-flux-oriented control of induction motor

    International Nuclear Information System (INIS)

    Barrera, Pablo M. de la; Bossio, Guillermo R.; Solsona, Jorge A.; Garcia, Guillermo O.

    2008-01-01

    A rotor flux state observer considering iron loss, for an Induction Motor (IM), is proposed. The aim of this proposal is to avoid detuning caused by the IM iron loss on a field-oriented control (FOC). An adaptive scheme for the K Fe , a parameter that represents the IM iron loss, is also proposed. The main objective of this scheme is to improve the dynamic response of control by compensating the variations of iron losses due to possible variations in the stator core characteristics. Simulation results demonstrated that the observer and the adaptive scheme showed a good performance fulfilling then the objectives

  12. Overeating with and without loss of control: Associations with weight status, weight-related characteristics, and psychosocial health.

    Science.gov (United States)

    Goldschmidt, Andrea B; Loth, Katie A; MacLehose, Richard F; Pisetsky, Emily M; Berge, Jerica M; Neumark-Sztainer, Dianne

    2015-12-01

    The relative importance of loss of control and overeating in the relationship between binge eating and eating-related and general psychopathology has been debated in the literature. This study assessed the prevalence and correlates of overeating with and without loss of control within a diverse, population-based sample of adolescents. A highly diverse (81.1% non-White) sample of adolescents (n = 2,793) from EAT-2010 (Eating and Activity in Teens) completed self-report questionnaires assessing eating-related psychopathology, substance use, nonsuicidal self-injury, depressive symptoms, and self-esteem. Overeating without loss of control was reported by 6.9% of girls and 5.0% of boys, while 9.6% of girls and 6.3% of boys reported overeating with loss of control (binge eating). Overall, overeating (with or without loss of control) was positively associated with unhealthy or extreme weight control behaviors, dieting, nonsuicidal self-injury, lower body satisfaction, and self-esteem, and higher depressive symptoms relative to no overeating. Among girls, binge eating was associated with unhealthy or extreme weight control behaviors, lower self-esteem, and higher depressive symptoms relative to overeating without loss of control, while in boys, binge eating was associated with greater cigarette usage, lower body satisfaction, and greater depressive symptoms than overeating without loss of control (although cigarette usage was comparable in boys reporting binge eating and no overeating). Any overeating, with or without loss of control, was associated with multiple adverse correlates among adolescents. Loss of control was uniquely associated with multiple health indicators, further highlighting its importance as a marker of severity of overeating. © 2015 Wiley Periodicals, Inc.

  13. Friendship and Emotion Control in Pre-Adolescents With or Without Hearing Loss.

    Science.gov (United States)

    Rieffe, Carolien; Broekhof, Evelien; Eichengreen, Adva; Kouwenberg, Maartje; Veiga, Guida; da Silva, Brenda M S; van der Laan, Anneke; Frijns, Johan H M

    2018-05-04

    Emotional functioning plays a crucial role in the social development of children and adolescents. We examined the extent to which emotion control was related to the quality of friendships in pre-adolescents with and without hearing loss. We tested 350 pre-adolescents (75 deaf/hard of hearing in mainstream education (DHHm), 48 deaf/hard of hearing in special education (DHHs), and 227 hearing) through self-report. Outcomes confirmed a positive association between emotion control and positive friendships for all groups, with one notable exception: more approach strategies for emotion regulation were associated with more negative friendship features in the DHHs group. In addition, the DHHm group demonstrated high levels of emotion control, while their levels of positive friendship features were still lower compared to the hearing group.

  14. Adaptive Marginal Costs-Based Distributed Economic Control of Microgrid Clusters Considering Line Loss

    Directory of Open Access Journals (Sweden)

    Xiaoqian Zhou

    2017-12-01

    Full Text Available When several microgrids (MG are interconnected into microgrid clusters (MGC, they have great potential to improve their reliability. Traditional droop control tends to make the total operating costs higher as the power is distributed by capacity ratios of distributed energy resources (DERs. This paper proposes an adaptive distributed economic control for islanded microgrids which considers line loss, specifically, an interesting marginal costs-based economic droop control is proposed, and consensus-based adaptive controller is applied, to deal with power limits and capacity constraints for storage. The whole expense can be effectively lowered by achieving identical marginal costs for DERs in MGC. Specially, the capacity constraints only for storages are also included to do further optimization. Moreover, consensus-based distributed secondary controllers are used to rapidly restore system frequency and voltage magnitudes. The above controllers only need to interact with neighbor DERs by a sparse communication network, eliminating the necessity of a central controller and enhancing the stability. A MGC, incorporating three microgrids, is used to verify the effectiveness of the proposed methods.

  15. Agarwood Waste as A New Fluid Loss Control Agent in Water-based Drilling Fluid

    Directory of Open Access Journals (Sweden)

    Azlinda Azizi

    2013-10-01

    Full Text Available Normal 0 false false false IN X-NONE X-NONE MicrosoftInternetExplorer4 Agarwood has been used widely in various ways, including traditional medicine and art. The usage of agarwood has grown broader in modern times include in therapeutic medicines and perfumery. In this paper the agarwood waste has been explored to be used as a fluid loss control agent to control fluid loss without affecting the drilling fluid rheological properties which are density, pH, viscosity, yield point and gel strength. Agarwood waste was used as an additive in the drilling fluid system due to its unique characteristic. Rheological and filtration measurements were performed on the formulated water-based drilling fluid. Formulations of a base solution of fresh water, sodium hydroxide, bentonite, barite, and xanthan gum were presented. The performance of the agarwood waste as the fluid loss control agent was compared with based fluid formulation and water-based drilling fluid with treating with conventional fluid loss control agent (starch. The filtrate volume of drilling fluid with agarwood waste was about 13 ml while for drilling fluid with conventional fluid loss control agent, starch gave 12 ml of filtrate volume after undergoing filtration test by using LPLT filter press. The performance of drilling fluid with agarwood was efficient as drilling fluid with starch. /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso

  16. Control of weight loss and sprouting of ginger rhizome in storage

    International Nuclear Information System (INIS)

    Paull, R.E.; Chen, N.J.; Goo, T.T.C.

    1988-01-01

    Methods were investigated to control weight loss and sprouting of stored ginger rhizome (Zingiber officinale Rosc), including waxing, sprout inhibitors, and gamma irradiation. Rhizomes stored for 3 months at 22°C and 70% RH lost about 20% weight. Waxing of the rhizome did not reduce water loss. Some wax treatments increased the number and length of sprouts. Preharvest application of maleic hydrazide significantly increased the number and reduced the length of sprouts. Postharvest CIPC application significantly reduced the length of sprouts. Vacuum infiltration increased the effectiveness of CIPC in reducing sprout length. Gamma and X-ray irradiation also reduced sprout number and length. Minimum doses of gamma radiation for sprout control was 25 Gy and 120 to 150 Gy for X-ray irradiation if the rhizome was stored for more than 3 months at 22°C. At higher dose of irradiation (500 Gy) was required if complete sprout growth control was needed for storage periods < 3 months at 22.degree. Suberization occurred during curing at 22°C, but the suberin layer did not completely protect the cut surface

  17. Analysis of Loss of Control Parameters for Aircraft Maneuvering in General Aviation

    Directory of Open Access Journals (Sweden)

    Sameer Ud-Din

    2018-01-01

    Full Text Available A rapid increase in the occurrence of loss of control in general aviation has raised concern in recent years. Loss of control (LOC pertains to unique characteristics in which external and internal events act in conjunction. The Federal Aviation Administration (FAA has approved an Integrated Safety Assessment Model (ISAM for evaluating safety in the National Airspace System (NAS. ISAM consists of an event sequence diagram (ESD with fault trees containing numerous parameters, which is recognized as casual risk model. In this paper, we outline an integrated risk assessment framework to model maneuvering through cross-examining external and internal events. The maneuvering is in the critical flight phase with a high number of LOC occurrences in general aviation, where highly trained and qualified pilots failed to maintain aircraft control irrespective of the preventive nature of the events. Various metrics have been presented for evaluating the significance of these parameters to identify the most important ones. The proposed sensitivity analysis considers the accident, fatality, and risk reduction frequencies that assist in the decision-making process and foresees future risks from a general aviation perspective.

  18. The combined effects of soya isoflavones and resistant starch on equol production and trabecular bone loss in ovariectomised mice.

    Science.gov (United States)

    Tousen, Yuko; Matsumoto, Yu; Matsumoto, Chiho; Nishide, Yoriko; Nagahata, Yuya; Kobayashi, Isao; Ishimi, Yoshiko

    2016-07-01

    Equol is a metabolite of the soya isoflavone (ISO) daidzein that is produced by intestinal microbiota. Equol has greater oestrogenic activity compared with other ISO, and it prevents bone loss in postmenopausal women. Resistant starch (RS), which has a prebiotic activity and is a dietary fibre, was reported to promote equol production. Conversely, the intestinal microbiota is reported to directly regulate bone health by reducing inflammatory cytokine levels and T-lymphocytes in bone. The present study evaluated the combined effects of diet supplemented with ISO and RS on intestinal microbiota, equol production, bone mineral density (BMD) and inflammatory gene expression in the bone marrow of ovariectomised (OVX) mice. Female ddY strain mice, aged 8 weeks, were either sham-operated (Sham, n 7) or OVX. OVX mice were randomly divided into the following four groups (seven per group): OVX control (OVX); OVX fed 0·05 % ISO diet (OVX+ISO); OVX fed 9 % RS diet (OVX+RS); and OVX fed 0·05 % ISO- and 9 % RS diet (OVX+ISO+RS). After 6 weeks, treatment with the combination of ISO and RS increased equol production, prevented the OVX-induced decline in trabecular BMD in the distal femur by modulating the enteric environment and altered OVX-induced inflammation-related gene expression in the bone marrow. However, there were no significant differences in bone parameters between the ISO+RS and ISO-alone groups in OVX mice. Our findings suggest that the combination of ISO and RS might alter intestinal microbiota and immune status in the bone marrow, resulting in attenuated bone resorption in OVX mice.

  19. A Promising Material by Using Residue Waste from Bisphenol A Manufacturing to Prepare Fluid-Loss-Control Additive in Oil Well Drilling Fluid

    Directory of Open Access Journals (Sweden)

    Zhi-Lei Zhang

    2013-01-01

    Full Text Available The residues mixture from Bisphenol A manufacturing process was analyzed. Fourier transform infrared (FTIR spectroscopy, gas chromatography-mass spectrometry (GC-MS, and nuclear magnetic resonance (NMR were used to characterize the residues. The results indicated that the residues were complex mixture of several molecules. 3-(2-Hydroxyphenyl-1,1,3-trimethyl-2,3-dihydro-1H-inden-5-ol and phenol were the main components of the residues. The technical feasibility of using it as phenol replacement in fluid-loss-control additive production was also investigated. The fluid-loss-control capacity of the novel additive was systematically investigated. It was discovered that the well fluid-loss performance of the prepared additive can be achieved, especially at high temperature.

  20. Pilot simulation tests of propulsion control as backup to loss of primary flight controls for a mid-size jet transport

    Science.gov (United States)

    1995-12-01

    Partial failures of aircraft primary flight-control systems and structural : damages to aircraft during flight have led to catastrophic accidents with : subsequent loss of life. These accidents can be prevented if sufficient : alternate control autho...

  1. Irradiation in the control of post harvest losses- a NRL contribution

    International Nuclear Information System (INIS)

    Roy, M.K.; Prasad, H.H.

    1994-01-01

    In-vitro growth of Phytophthora parasitica is completely prevented by a dose of 1.5kGy of gamma radiation and that of Phomopsis vexans by a dose of 4.0kGy. These doses, however cannot prevent the growth of other three studied fungi viz. Fusarium ceoruleum, Geotrichum candidum and Alternaria alternata and exerted only a reversible effect on their growth. Irradiation as a method for the control of harvest losses in fruits, tomato, rice etc. were studied at Nuclear Research Laboratory (NRL) and the results are given. 2 figs., 8 tabs

  2. Control of phase transition dynamics in media with nanoscale nonuniformities by coherence loss spectroscopy

    International Nuclear Information System (INIS)

    Brodsky, Anatol M

    2010-01-01

    The optical nondestructive characterization of chemical transformation dynamics and diffusion kinetics, including phase transitions, in heterogeneous media with a random distribution of nanoparticles (nano-nonuniformities), is of great theoretical and practical importance. Such characterization, with the help of coherence loss spectroscopy, considered in this paper can be applied for the control of a number of industrial processes dynamics, environmental monitoring, and medical diagnostics and therapy. As a specific example, the growth of crystal nuclei (embrions) as a result of the diffusion to them of a substance from the surrounding supersaturated solution is considered

  3. Decentralized Model Predictive Control for Cooperative Multiple Vehicles Subject to Communication Loss

    Directory of Open Access Journals (Sweden)

    Hojjat A. Izadi

    2011-01-01

    Full Text Available The decentralized model predictive control (DMPC of multiple cooperative vehicles with the possibility of communication loss/delay is investigated. The neighboring vehicles exchange their predicted trajectories at every sample time to maintain the cooperation objectives. In the event of a communication loss (packet dropout, the most recent available information, which is potentially delayed, is used. Then the communication loss problem changes to a cooperative problem when random large communication delays are present. Such large communication delays can lead to poor cooperation performance and unsafe behaviors such as collisions. A new DMPC approach is developed to improve the cooperation performance and achieve safety in the presence of the large communication delays. The proposed DMPC architecture estimates the tail of neighbor's trajectory which is not available due to the large communication delays for improving the performance. The concept of the tube MPC is also employed to provide the safety of the fleet against collisions, in the presence of large intervehicle communication delays. In this approach, a tube shaped trajectory set is assumed around the trajectory of the neighboring vehicles whose trajectory is delayed/lost. The radius of tube is a function of the communication delay and vehicle's maneuverability (in the absence of model uncertainty. The simulation of formation problem of multiple vehicles is employed to illustrate the effectiveness of the proposed approach.

  4. Production Quality Control Of Microfluidic Chip Designs

    DEFF Research Database (Denmark)

    Calaon, Matteo; Hansen, Hans Nørgaard; Tosello, Guido

    2012-01-01

    The challenge of fabricating geometries with critical dimensions ranging from few microns down to 10 nanometers with high production rate is delaying the development of nanotechnology based products. Diverse research works have shown the capability of technologies such as UV lithography, nano imp...

  5. A framework for production control in health care organizations

    NARCIS (Netherlands)

    Vissers, Jan; Bertrand, J.W.M.; Vries, de G.

    2001-01-01

    The paper presents a hierarchical framework for production control of hospitals which deals with the balance between service and efficiency, at all levels of planning and control. The framework is based on an analysis of the design requirements for hospital production control systems. These design

  6. Postural control in children with typical development and children with profound hearing loss

    Directory of Open Access Journals (Sweden)

    Monteiro de Sousa AM

    2012-05-01

    Full Text Available Aneliza Maria Monteiro de Sousa,1 Jônatas de França Barros,2 Brígido Martins de Sousa Neto31Faculty of Health Sciences, University of Brasilia, Brasilia, Federal District, Brazil; 2Department of Physical Education at the Federal University of Rio Grande do Norte, Natal, Rio Grande do Norte, Brazil; 3University Center UNIEURO, Brasilia, Federal District, BrazilPurpose: To describe the behavior of the postural control in children with profound sensorineural hearing loss and compare the results of experimental tests with hearing children aged 7 to 10 years.Patients and methods: This is a cross-sectional study where 100 children were divided into experimental and control groups. We used a force platform, AccuSway Plus, where the tests were conducted under the experimental conditions: open base, eyes open (OBEO; open base, eyes closed (OBEC; closed base, eyes open (CBEO; closed base, eyes closed (CBEC. The body sway velocity (V of the center of pressure, the displacement in the anteroposterior direction (COPap and mediolateral (COPml of the center of pressure were the parameters to evaluate the postural control. For statistical analysis we used the nonparametric Mann–Whitney U test, with a significance level of 5%.Results: In comparisons of variables between the groups, the experimental group outperformed by at least 75% of the control group values. In terms of global trends, the experimental group shows higher values of body oscillations in all experimental conditions and variables evaluated. Children with hearing loss had poorer balance performance compared to the group of hearing. The inferential analysis revealed a statistically significant difference in the balance between deaf and hearing children in the OBEC experimental condition in relation to the COPml parameter (P = 0.04. There were no statistically significant differences in comparisons between the sexes when the groups were analyzed separately. The prevalence of unknown etiology

  7. A randomized controlled trial testing an Internet delivered cost-benefit approach to weight loss maintenance.

    Science.gov (United States)

    Leahey, Tricia M; Fava, Joseph L; Seiden, Andrew; Fernandes, Denise; Doyle, Caroline; Kent, Kimberly; La Rue, Molly; Mitchell, Marc; Wing, Rena R

    2016-11-01

    Weight loss maintenance is a significant challenge in obesity treatment. During maintenance the "costs" of adhering to weight management behaviors may outweigh the "benefits." This study examined the efficacy of a novel approach to weight loss maintenance based on modifying the cost-benefit ratio. Individuals who achieved a 5% weight loss (N=75) were randomized to one of three, 10-month maintenance interventions. All interventions were delivered primarily via the Internet. The Standard arm received traditional weight maintenance strategies. To increase benefits, or rewards, for maintenance behaviors, the two cost-benefit intervention conditions received weekly monetary rewards for self-monitoring and social reinforcement via e-coaching. To decrease behavioral costs (boredom) and increase novelty, participants in the cost-benefit conditions also monitored different evidence-based behaviors every two weeks (e.g., Weeks 1 & 2: steps; Week 3 & 4: red foods). The primary difference between the cost-benefit interventions was type of e-coach providing social reinforcement: Professional (CB Pro) or Peer (CB Peer). Study procedures took place in Providence, RI from 2013 to 2014. Retention was 99%. There were significant group differences in weight regain (p=.01). The Standard arm gained 3.5±5.7kg. In contrast, participants in CB Pro and CB Peer lost an additional 1.8±7.0kg and 0.5±6.4kg, respectively. These results suggest that an Internet delivered cost-benefit approach to weight loss maintenance may be effective for long-term weight control. In addition, using peer coaches to provide reinforcement may be a particularly economic alternative to professionals. These data are promising and provide support for a larger, longer trial. Copyright © 2016 Elsevier Inc. All rights reserved.

  8. Applications of natural products in the control of mosquito ...

    African Journals Online (AJOL)

    Applications of natural products in the control of mosquito-transmitted ... African Journal of Biotechnology ... Ultimately, a paradigm shift in research that evaluates natural products in a comparative manner will help to produce new materials for ...

  9. Integration of production control and enterprise management systems in horticulture

    NARCIS (Netherlands)

    Verdouw, Cor; Robbemond, Robbert; Kruize, Jan Willem

    2015-01-01

    Production processes in horticulture are increasingly industrialized. Greenhouses have developed towards high-tech production plants that are highly automated by advanced systems for climate control, irrigation, crop monitoring, harvesting, internal transportation, sorting and packaging. At the

  10. Productivity losses due to premature mortality from cancer in Brazil, Russia, India, China, and South Africa (BRICS): A population-based comparison.

    Science.gov (United States)

    Pearce, Alison; Sharp, Linda; Hanly, Paul; Barchuk, Anton; Bray, Freddie; de Camargo Cancela, Marianna; Gupta, Prakash; Meheus, Filip; Qiao, You-Lin; Sitas, Freddy; Wang, Shao-Ming; Soerjomataram, Isabelle

    2018-04-01

    Over two-thirds of the world's cancer deaths occur in economically developing countries; however, the societal costs of cancer have rarely been assessed in these settings. Our aim was to estimate the value of productivity lost in 2012 due to cancer-related premature mortality in the major developing economies of Brazil, the Russian Federation, India, China and South Africa (BRICS). We applied an incidence-based method using the human capital approach. We used annual adult cancer deaths from GLOBOCAN2012 to estimate the years of productive life lost between cancer death and pensionable age in each country, valued using national and international data for wages, and workforce statistics. Sensitivity analyses examined various methodological assumptions. The total cost of lost productivity due to premature cancer mortality in the BRICS countries in 2012 was $46·3 billion, representing 0·33% of their combined gross domestic product. The largest total productivity loss was in China ($28 billion), while South Africa had the highest cost per cancer death ($101,000). Total productivity losses were greatest for lung cancer in Brazil, the Russian Federation and South Africa; liver cancer in China; and lip and oral cavity cancers in India. Locally-tailored strategies are required to reduce the economic burden of cancer in developing economies. Focussing on tobacco control, vaccination programs and cancer screening, combined with access to adequate treatment, could yield significant gains for both public health and economic performance of the BRICS countries. Copyright © 2017 Elsevier Ltd. All rights reserved.

  11. Peripheral airway impairment measured by oscillometry predicts loss of asthma control in children.

    Science.gov (United States)

    Shi, Yixin; Aledia, Anna S; Galant, Stanley P; George, Steven C

    2013-03-01

    We previously showed that impulse oscillometry (IOS) indices of peripheral airway function are associated with asthma control in children. However, little data exist on whether dysfunction in the peripheral airways can predict loss of asthma control. We sought to determine the utility of peripheral airway impairment, as measured by IOS, in predicting loss of asthma control in children. Fifty-four children (age, 7-17 years) with controlled asthma were enrolled in the study. Spirometric and IOS indices of airway function were obtained at baseline and at a follow-up visit 8 to 12 weeks later. Physicians who were blinded to the IOS measurements assessed asthma control (National Asthma Education and Prevention Program guidelines) on both visits and prescribed no medication change between visits. Thirty-eight (70%) patients maintained asthma control between 2 visits (group C-C), and 16 patients had asthma that became uncontrolled on the follow-up visit (group C-UC). There was no difference in baseline spirometric results between the C-C and C-UC groups, except for FEV1/forced vital capacity ratio (86% vs 82%, respectively; P IOS results, including resistance of the respiratory system at 5 Hz (R5; 6.4 vs 4.3 cm H2O · L(-1) · s), frequency dependence of resistance (difference of R5 and resistance of the respiratory system at 20 Hz [R5-20]; 2.0 vs 0.7 cm H2O · L(-1) · s), and reactance area (13.1 vs 4.1 cm H2O · L(-1)), of group C-UC were significantly higher than those of group C-C (P operating characteristic analysis showed baseline R5-20 and reactance area effectively predicted asthma control status at the follow-up visit (area under the curve, 0.91 and 0.90). Children with controlled asthma who have increased peripheral airway IOS indices are at risk of losing asthma control. Copyright © 2012 American Academy of Allergy, Asthma & Immunology. Published by Mosby, Inc. All rights reserved.

  12. More than 30 per cent energy savings possible with LEDs in gerbera : substantial energy savings and little loss in production

    NARCIS (Netherlands)

    Helm, van der F.P.M.

    2015-01-01

    By installing LED-lighting and limiting it to 80 instead of 100 μmol gerbera growers can save 30 per cent on energy without any great loss in production, according to research. Light integration and interlighting don’t yet deliver any savings.

  13. Responses to Financial Loss During the Great Recession: An Examination of Sense of Control in Late Midlife.

    Science.gov (United States)

    Mejía, Shannon T; Settersten, Richard A; Odden, Michelle C; Hooker, Karen

    2016-07-01

    The "Great Recession" shocked the primary institutions that help individuals and families meet their needs and plan for the future. This study examines middle-aged adults' experiences of financial loss and considers how socioeconomic and interpersonal resources facilitate or hinder maintaining a sense of control in the face of economic uncertainty. Using the 2006 and 2010 waves of the Health and Retirement Study, change in income and wealth, giving help to and receiving help from others, household complexity, and sense of control were measured among middle-aged adults (n = 3,850; age = 51-60 years). Socioeconomic resources predicted both the level of and change in the engagement of interpersonal resources prior to and during the Great Recession. Experiences of financial loss were associated with increased engagement of interpersonal resources and decreased sense of control. The effect of financial loss was dampened by education. Sense of control increased with giving help and decreased with household complexity. Findings suggest that, across socioeconomic strata, proportional loss in financial resources resulted in a loss in sense of control. However, responses to financial loss differed by socioeconomic status, which differentiated the ability to maintain a sense of control following financial loss. © The Author 2015. Published by Oxford University Press on behalf of The Gerontological Society of America. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  14. Direct product quality control for energy efficient climate controlled transport of agro-material

    NARCIS (Netherlands)

    Verdijck, G.J.C.; Preisig, H.A.; Straten, van G.

    2005-01-01

    A (model-based) Product Quality Controller is presented for climate controlled operations involving agro-material, such as storage and transport. This controller belongs to the class of Model Predictive Controllers and fits in a previously developed hierarchical control structure. The new Product

  15. Behavioral trends in young children with conductive hearing loss: a case-control study.

    Science.gov (United States)

    Gouma, Panagiota; Mallis, Antonios; Daniilidis, Vasilis; Gouveris, Haralambos; Armenakis, Nikolaos; Naxakis, Stephanos

    2011-01-01

    Otitis media with effusion (OME) is a common condition affecting children and a well-known cause of conductive hearing loss that can potentially lead to speech development disorders. Recent studies, however, have demonstrated the influence of OME on development of attention disorders or social adaptation and acceptance. Hence, this study aimed to investigate the behavioral trends of children with OME based on the Achenbach test. A group of 117 patients with episodes of OME at the age of 4-5 was compared with a control group according to the Achenbach system of evaluation, by application of the Child Behavior Checklist questionnaire (CBCL). Patients suffering from OME had more anxiety/depression related disorders and attention disorders as compared with the control group. The psychological effect of OME in children of ages 6-8 is evident with anxiety and depression disorders being especially prominent among these patients.

  16. Structure of a scheme of emergency control to avoid blackout due to interconnection lines loss

    Energy Technology Data Exchange (ETDEWEB)

    Luz, L.T. da; Werberich, L C; Herve, H M [Companhia Estadual de Energia Eletrica do Estado do Rio Grande do Sul (CEEE), Porto Alegre, RS (Brazil)

    1994-12-31

    This work presents the structure of Gravatai Emergency Control Scheme (ECS) with short about its development and operation. This ECS was made to avoid two kinds of problems for the systems of Companhia Estadual de Energia Eletrica (CEEE). The first one is the voltage collapse that happens after the opening of one of the 525 kv LTs of the interconnection with the Brazilian Interconnected System (BIS). The second one is the CEEE isolating after the 525 kV network loss. We show the ECS existence reason and we describe its functional structure, the substations, the circuits and the amount of load shedding involved by the system. Finally, we present the project of a control structure based on microcomputer which is being developed for this ECS. (author) 3 refs., 11 figs.

  17. Controlled Transverse Blow-up of Highenergy Proton Beams for Aperture Measurements and Loss Maps

    CERN Document Server

    Hӧfle, W; Redaelli, S; Schmidt, R; Valuch, D; Wollmann, D; Zerlauth, M

    2012-01-01

    A technique was developed to blow-up transversely in a controlled way high energy proton beams in the LHC. The technique is based on band limited white noise excitation that is injected into the transverse damper feedback loop. The injected signal can be gated to selectively blow-up individual trains of bunches. The speed of transverse blow-up can be precisely controlled. This opens the possibility to perform safely and efficiently aperture measurements and loss maps with high intensity bunch trains well above stored beam energies that are considered to be safe. In particular, lengthy procedures for measurements at top energy, otherwise requiring multiple fills of individual bunches, can be avoided. In this paper, the method is presented and results from beam measurements are discussed and compared with alternative blowup methods.

  18. Smartphone Technology and Text Messaging for Weight Loss in Young Adults: A Randomized Controlled Trial.

    Science.gov (United States)

    Stephens, Janna D; Yager, Allison M; Allen, Jerilyn

    Using smartphone technology and text messaging for health is a growing field. This type of technology is well integrated into the lives of young adults. However, few studies have tested the effect of this type of technology to promote weight loss in young adults OBJECTIVE:: The purpose of this study is to test the effectiveness of a behaviorally based smartphone application for weight loss combined with text messaging from a health coach on weight, body mass index (BMI), and waist circumference in young adults as compared with a control condition. Sixty-two young adults, aged 18 to 25 years, were randomized to receive (1) a smartphone application + health coach intervention and counseling sessions or (2) control condition with a counseling session. All outcome measures were tested at baseline and 3 months. These included weight, BMI, waist circumference, dietary habits, physical activity habits, and self-efficacy for healthy eating and physical activity. The sample was 71% female and 39% white, with an average age of 20 years and average BMI of 28.5 kg/m. Participants in the smartphone + health coach group lost significantly more weight (P = .026) and had a significant reduction in both BMI (P = .024) and waist circumference (P technology and feedback from a health coach on improving weight in a group of diverse young adults.

  19. Loss of control over the ethanol consumption: differential transcriptional regulation in prefrontal cortex.

    Science.gov (United States)

    de Paiva Lima, Carolina; da Silva E Silva, Daniel Almeida; Damasceno, Samara; Ribeiro, Andrea Frozino; Rocha, Cristiane S; Berenguer de Matos, Alexandre H; Correia, Diego; Boerngen-Lacerda, Roseli; Brunialti Godard, Ana Lúcia

    2017-09-01

    Alcohol use disorder (AUD) is a complex multifactorial disease with heritability of ∼50% and corresponds to the state in which the body triggers a reinforcement or reward compulsive behavior due to ethanol consumption, even when faced with negative consequences. Although several studies have shown the impact of high ethanol intake on the prefrontal cortex (PFC) gene expression, few have addressed the relationship between the patterns of gene expression underlying the compulsive behaviour associated with relapsing. In this study, we used a chronic three-bottle free-choice mouse model to investigate the PFC transcriptome in three different groups of mice drinkers: 'Light drinkers' (preference for water throughout the experiment); 'Heavy drinkers' (preference for ethanol with a non-compulsive intake), and 'Inflexible drinkers' (preference for ethanol with a compulsive drinking component). Our aim was to correlate the intake patterns observed in this model with gene expression changes in the PFC, a brain region critical for the development and maintenance of alcohol addiction. We found that the Camk2a gene showed a downregulated profile only in the Inflexible when compared to the Light drinkers group, the Camk2n1 and Pkp2 genes showed an upregulated profile only in the Inflexible drinkers when compared to the Control group, and the Gja1 gene showed an upregulated profile in the Light and Inflexible drinkers when compared to the Control group. These different transcription patterns have been associated to the presence of alcohol, in the Camk2n1 and Gja1 genes; to the amount of ethanol consumed, in the Camk2a gene; and to the loss of control in the alcohol consumption, in the Pkp2 gene. Here, we provide, for the first time, the potential involvement of the Pkp2 gene in the compulsivity and loss of control over the voluntary ethanol consumption.

  20. Removal of uremic retention products by hemodialysis is coupled with indiscriminate loss of vital metabolites.

    Science.gov (United States)

    Zhang, Zhi-Hao; Mao, Jia-Rong; Chen, Hua; Su, Wei; Zhang, Yuan; Zhang, Li; Chen, Dan-Qian; Zhao, Ying-Yong; Vaziri, Nosratola D

    2017-12-01

    Although dialysis ameliorates uremia and fluid and electrolytes disorders, annual mortality rate remains high in dialysis population reflecting its shortcoming in replacing renal function. Unlike the normal kidney, dialysis causes dramatic shifts in volume and composition of body fluids and indiscriminate removal of vital solutes. Present study was undertaken to determine the impact of hemodialysis on plasma metabolites in end-stage renal disease (ESRD) patients. 80 hemodialysis patients and 80 age/gender-matched healthy controls were enrolled in the study. Using ultra performance liquid chromatography-high-definition mass spectrometry, we measured plasma metabolites before, during, and after hemodialysis procedure and in blood entering and leaving the dialysis filter. Principal component analysis revealed significant difference in concentration of 214 metabolites between healthy control and ESRD patients' pre-dialysis plasma (126 increased and 88 reduced in ESRD group). Comparison of post-dialysis with pre-dialysis data revealed significant changes in the 362 metabolites. Among ESI + metabolites 195 decreased and 55 increased and among ESI - metabolites 82 decreased and 30 increased following hemodialysis. Single blood passage through the dialyzer caused significant changes in 323 metabolites. Comparison of ESRD patients' post-hemodialysis with healthy subjects' data revealed marked differences in metabolic profiles. We identified 55 of the 362 differential metabolites including well known uremic toxins, waste products and vital biological compounds. In addition to uremic toxins and waste products hemodialysis removes large number of identified and as-yet un-identified metabolites. Depletion of vital biological compounds by dialysis may contribute to the high morbidity and annual mortality rate in this population. Copyright © 2017 The Canadian Society of Clinical Chemists. Published by Elsevier Inc. All rights reserved.

  1. Maternal Use of Weight Loss Products and the Risk of Neural Tube Defects in Offspring: A Systematic Literature Review.

    Science.gov (United States)

    Hoang, Thanh T; Agopian, A J; Mitchell, Laura E

    2018-01-15

    Several studies have assessed potential associations between use of weight loss products in the periconceptional period and neural tube defects (NTDs). However, the individual studies are inconclusive and there has not been a systematic review of this literature. We conducted a systematic search, using Ovid MEDLINE and PubMed, to identify studies that evaluated the association between products used for weight loss and the risk of NTDs. Because many studies of birth defects only evaluate a composite birth defect outcome, we evaluated studies that defined the outcome as "any major birth defect" or as NTDs. We abstracted data on study design, exposure definition, outcome definition, covariates and effect size estimates from each article that met our inclusion criteria. For studies that evaluated a composite birth defect outcome, we also abstracted the number of NTD cases included in the composite outcome. We used a modified version of the Newcastle-Ottawa Scale to assess the quality of each article. We screened 865 citations and identified nine articles that met our inclusion criteria. The majority of studies reported positive associations between maternal use of weight loss products and birth defects (overall and NTDs). However, there were few significant associations and there was considerable heterogeneity in the specific exposures assessed across the nine studies. Our systematic review of weight loss products and NTDs indicates that the literature on this topic is sparse. Because several studies reported modest, positive associations between risk and use of weight loss products, additional studies are warranted. Birth Defects Research 110:48-55, 2018. © 2017 Wiley Periodicals, Inc. © 2017 Wiley Periodicals, Inc.

  2. Portion controlled ready-to-eat meal replacement is associated with short term weight loss: a randomised controlled trial.

    Science.gov (United States)

    Kuriyan, Rebecca; Lokesh, Deepa P; D'Souza, Ninoshka; Priscilla, Divya J; Peris, Chandni Halcyon; Selvam, Sumithra; Kurpad, Anura V

    2017-01-01

    Strategies to prevent and treat overweight/obesity are urgently needed. This study assessed the effect of a short-term intake of ready-to-eat cereal on body weight and waist circumference of overweight/obese individuals in comparison to a control group. A randomized, controlled 2-arm trial was carried out on 101 overweight/obese (Body Mass Index - 29.2±2.4 kg/m2) females aged 18 to 44 years, at St. John's Medical College Hospital. The intervention group received a low fat, ready to eat cereal, replacing two meals/day for two weeks. The control group was provided with standard dietary guidelines for weight loss and energy requirements for both groups were calculated similarly. Anthropometric, dietary, appetite and health status assessments were carried out at baseline and at the end of two weeks. At the end of two weeks, the mean reductions in body weight and waist circumference were significantly greater in the intervention group, -0.53 kg; 95% CI (-0.86 to -0.19) for body weight and -1.39 cm; 95% CI (-1.78, -0.99) for waist circumference. The intervention group had a significantly higher increase in dietary intakes of certain vitamins, fiber and sugar, and significantly higher reductions in total and polyunsaturated fats and sodium intakes, as compared to the control group (peat cereal could be effective for short-term weight loss, with some improvements in the nutrient intake profile. However, studies of longer duration are needed.

  3. Production Losses From an Endemic Animal Disease: Porcine Reproductive and Respiratory Syndrome (PRRS in Selected Midwest US Sow Farms

    Directory of Open Access Journals (Sweden)

    Pablo Valdes-Donoso

    2018-05-01

    Full Text Available Porcine reproductive and respiratory syndrome (PRRS is an endemic disease causing important economic losses to the US swine industry. The complex epidemiology of the disease, along with the diverse clinical outputs observed in different types of infected farms, have hampered efforts to quantify PRRS’ impact on production over time. We measured the impact of PRRS on the production of weaned pigs using a log-linear fixed effects model to evaluate longitudinal data collected from 16 sow farms belonging to a specific firm. We measured seven additional indicators of farm performance to gain insight into disease dynamics. We used pre-outbreak longitudinal data to establish a baseline that was then used to estimate the decrease in production. A significant rise of abortions in the week before the outbreak was reported was the strongest signal of PRRSV activity. In addition, production declined slightly one week before the outbreak and then fell markedly until weeks 5 and 6 post-outbreak. Recovery was not monotonic, cycling gently around a rising trend. At the end of the study period (35 weeks post-outbreak, neither the production of weaned pigs nor any of the performance indicators had fully recovered to baseline levels. This result suggests PRSS outbreaks may last longer than has been found in most other studies. We assessed PRRS’ effect on farm efficiency as measured by changes in sow production of weaned pigs per year. We translated production losses into revenue losses assuming an average market price of $45.2/weaned pig. We estimate that the average PRSS outbreak reduced production by approximately 7.4%, relative to annual output in the absence of an outbreak. PRRS reduced production by 1.92 weaned pigs per sow when adjusted to an annual basis. This decrease is substantially larger than the 1.44 decrease of weaned pigs per sow/year reported elsewhere.

  4. Perceived health and work-environment related problems and associated subjective production loss in an academic population.

    Science.gov (United States)

    Lohela-Karlsson, Malin; Nybergh, Lotta; Jensen, Irene

    2018-02-14

    The aim was to investigate the prevalence of health problems and work environment problems and how these are associated with subjective production loss among women and men at an academic workplace. An additional aim was to investigate whether there were differences between women and men according to age group, years at current workplace, academic rank or managerial position. A questionnaire was sent in 2011 to all employees at a Swedish university (n = 5144). Only researchers and teachers were included in the study (n = 3207). Spearman correlations were performed to investigate differences in health and work environment problems. Employees who reported having experienced work environment or health problems in the previous seven days (n = 1475) were included in the analyses in order to investigate differences in subjective production loss. This was done using Student's t-test, One-way Anova and generalized linear models. The response rate was 63% (n = 2022). A total of 819 academic staff (40% of the population) reported experiencing either health problems, work environment problems or both during the previous seven days. The prevalence of health problems only or a combination of work environment and health problems was higher among women than men (p-value ˂0.05). This was especially the case for younger women, those in lower academic positions and those who had worked for fewer years at their current workplace. No difference was found for work environment problems. The majority of the employees who reported problems said that these problems affected their ability to perform at work (84-99%). The average production loss varied between 31 and 42% depending on the type of problem. Production loss due to health-related and work-environment related problems was highest among junior researchers and managers. No significant difference between men and women was found in the level of production loss. Subjective production loss in academia can be associated

  5. Verification of product quality from process control

    International Nuclear Information System (INIS)

    Drobot, A.; Bunnell, L.R.; Freeborn, W.P.; Macedo, P.B.; Mellinger, G.B.; Pegg, I.L.; Piepel, G.F.; Reimus, M.A.H.; Routt, K.R.; Saad, E.

    1989-01-01

    Process models were developed to characterize the waste vitrification at West Valley, in terms of process operating constraints and glass compositions achievable. The need for verification of compliance with the proposed Waste Acceptance Preliminary Specification criteria led to development of product models, the most critical one being a glass durability model. Both process and product models were used in developing a target composition for the waste glass. This target composition designed to ensure that glasses made to this target will be of acceptable durability after all process variations have been accounted for. 4 refs., 11 figs., 5 tabs

  6. The importance of job control for workers with decreased work ability to remain productive at work.

    Science.gov (United States)

    van den Berg, Tilja I; Robroek, Suzan J; Plat, Jan F; Koopmanschap, Marc A; Burdorf, Alex

    2011-08-01

    Workers with decreased work ability are at greater risk of reduced productivity at work. We hypothesized that work-related characteristics play an important role in supporting workers to remain productive despite decreased work ability. The study population consisted of 10,542 workers in 49 different companies in the Netherlands in 2005-2009. Productivity loss at work was defined on a 10-point scale by asking how much work was actually performed during regular hours on the last regular workday when compared with normal. Independent variables in the logistic regression analysis were individual characteristics, work-related factors, and the work ability index. Additive interactions between work-related factors and decreased work ability were evaluated by the relative excess risk due to interaction (RERI). The odds ratios and 95% confidence intervals (CI) for the likelihood of productivity loss at work were 2.03 (1.85-2.22), 3.50 (3.10-3.95), and 5.54 (4.37-7.03) for a good, moderate, and poor work ability, compared with an excellent work ability (reference group). Productivity loss at work was associated with lack of job control, poor skill discretion, and high work demands. There was a significant interaction between decreased work ability and lack of job control (RERI = 0.63 95% CI 0.11-1.16) with productivity loss at work. The negative effects on work performance of decreased work ability may be partly counterbalanced by increased job control. This suggests that interventions among workers with (chronic) disease that cause a decreased work ability should include enlargement of possibilities to plan and pace their own activities at work.

  7. Health risks, past usage, and intention to use weight loss products in normal weight women with high and low body dysphoria.

    Science.gov (United States)

    Whisenhunt, B L; Williamson, D A; Netemeyer, R G; Andrews, C

    2003-06-01

    There are many health risks involved with the use of weight loss products by normal weight women. The mass media may compound this problem through the promotion of weight loss products and a thin body size. This study tested women's perceptions of different weight loss product ads to determine if body dysphoria (i.e., an over concern with body size and shape in normal weight people) was associated with risk beliefs, past behaviors, and intention toward using weight loss products. Normal weight women (age range = 18-41 yr), who were classified as either high (n=45) or low (n=43) on a measure of body dysphoria, rated different weight loss products according to their perception of health risks, past behavior, and their intention to consume the products. These products were a dietary fat substitute (olestra), a prescription obesity medication (sibutramine), and an over-the-counter appetite suppressant (phenylpropanolamine). High body dysphoric women reported higher intentions to use the products as well as increased prior use of two of the three weight loss products. High body dysphoric women did not believe that these weight loss products were harmless. They recognized potential health risks associated with using such products, but nonetheless, expressed intention to use these weight loss products at a higher frequency. Also, several variables related to body image were found to effectively discriminate normal weight women at risk for abusing weight loss products. This study found that women who do not need to lose weight but have significant body image concerns were willing to use potentially harmful weight loss products despite the knowledge that such products might pose significant health risks. Techniques utilized by advertising regulatory agencies such as warning labels did not have a strong deterrent effect for stated intentions to use the products. Implications of these findings for public health policy issues were discussed.

  8. A Simple Method for Estimating the Economic Cost of Productivity Loss Due to Blindness and Moderate to Severe Visual Impairment.

    Science.gov (United States)

    Eckert, Kristen A; Carter, Marissa J; Lansingh, Van C; Wilson, David A; Furtado, João M; Frick, Kevin D; Resnikoff, Serge

    2015-01-01

    To estimate the annual loss of productivity from blindness and moderate to severe visual impairment (MSVI) using simple models (analogous to how a rapid assessment model relates to a comprehensive model) based on minimum wage (MW) and gross national income (GNI) per capita (US$, 2011). Cost of blindness (COB) was calculated for the age group ≥50 years in nine sample countries by assuming the loss of current MW and loss of GNI per capita. It was assumed that all individuals work until 65 years old and that half of visual impairment prevalent in the ≥50 years age group is prevalent in the 50-64 years age group. For cost of MSVI (COMSVI), individual wage and GNI loss of 30% was assumed. Results were compared with the values of the uncorrected refractive error (URE) model of productivity loss. COB (MW method) ranged from $0.1 billion in Honduras to $2.5 billion in the United States, and COMSVI ranged from $0.1 billion in Honduras to $5.3 billion in the US. COB (GNI method) ranged from $0.1 million in Honduras to $7.8 billion in the US, and COMSVI ranged from $0.1 billion in Honduras to $16.5 billion in the US. Most GNI method values were near equivalent to those of the URE model. Although most people with blindness and MSVI live in developing countries, the highest productivity losses are in high income countries. The global economy could improve if eye care were made more accessible and more affordable to all.

  9. Metabolic Syndrome Increases the Risk of Sudden Sensorineural Hearing Loss in Taiwan: A Case-Control Study.

    Science.gov (United States)

    Chien, Chen-Yu; Tai, Shu-Yu; Wang, Ling-Feng; Hsi, Edward; Chang, Ning-Chia; Wu, Ming-Tsang; Ho, Kuen-Yao

    2015-07-01

    Sudden sensorineural hearing loss has been reported to be associated with diabetes mellitus, hypertension, and hyperlipidemia in previous studies. The aim of this study was to examine whether metabolic syndrome increases the risk of sudden sensorineural hearing loss in Taiwan. A case-control study. Tertiary university hospital. We retrospectively investigated 181 cases of sudden sensorineural hearing loss and 181 controls from the Department of Otorhinolaryngology, Kaohsiung Medical University Hospital, in southern Taiwan from 2010 to 2012, comparing their clinical variables. We analyzed the relationship between metabolic syndrome and sudden sensorineural hearing loss. Metabolic syndrome was defined according to the National Cholesterol Education Program Adult Treatment Panel III with Asian modifications. The demographic and clinical characteristics, audiometry results, and outcome were reviewed. Subjects with metabolic syndrome had a 3.54-fold increased risk (95% confidence interval [CI] = 2.00-6.43, P diabetes mellitus, hypertension, and hyperlipidemia. With increases in the number of metabolic syndrome components, the risk of sudden sensorineural hearing loss increased (P for trend Vertigo was associated with a poor outcome (P = .02; 95% CI = 1.13~5.13, adjusted odds ratio = 2.39). The hearing loss pattern may influence the outcome of sudden sensorineural hearing loss (P Vertigo and total hearing loss were indicators of a poor outcome in sudden sensorineural hearing loss. © American Academy of Otolaryngology—Head and Neck Surgery Foundation 2015.

  10. Oil Reservoir Production Optimization using Optimal Control

    DEFF Research Database (Denmark)

    Völcker, Carsten; Jørgensen, John Bagterp; Stenby, Erling Halfdan

    2011-01-01

    Practical oil reservoir management involves solution of large-scale constrained optimal control problems. In this paper we present a numerical method for solution of large-scale constrained optimal control problems. The method is a single-shooting method that computes the gradients using the adjo...... reservoir using water ooding and smart well technology. Compared to the uncontrolled case, the optimal operation increases the Net Present Value of the oil field by 10%.......Practical oil reservoir management involves solution of large-scale constrained optimal control problems. In this paper we present a numerical method for solution of large-scale constrained optimal control problems. The method is a single-shooting method that computes the gradients using...

  11. Applications of Kalman Filtering to nuclear material control. [Kalman filtering and linear smoothing for detecting nuclear material losses

    Energy Technology Data Exchange (ETDEWEB)

    Pike, D.H.; Morrison, G.W.; Westley, G.W.

    1977-10-01

    The feasibility of using modern state estimation techniques (specifically Kalman Filtering and Linear Smoothing) to detect losses of material from material balance areas is evaluated. It is shown that state estimation techniques are not only feasible but in most situations are superior to existing methods of analysis. The various techniques compared include Kalman Filtering, linear smoothing, standard control charts, and average cumulative summation (CUSUM) charts. Analysis results indicated that the standard control chart is the least effective method for detecting regularly occurring losses. An improvement in the detection capability over the standard control chart can be realized by use of the CUSUM chart. Even more sensitivity in the ability to detect losses can be realized by use of the Kalman Filter and the linear smoother. It was found that the error-covariance matrix can be used to establish limits of error for state estimates. It is shown that state estimation techniques represent a feasible and desirable method of theft detection. The technique is usually more sensitive than the CUSUM chart in detecting losses. One kind of loss which is difficult to detect using state estimation techniques is a single isolated loss. State estimation procedures are predicated on dynamic models and are well-suited for detecting losses which occur regularly over several accounting periods. A single isolated loss does not conform to this basic assumption and is more difficult to detect.

  12. Where do the main losses of energy resources occur - at the point of consumption or at the point of production?

    Energy Technology Data Exchange (ETDEWEB)

    Moskalenko, Alexander

    2010-09-15

    This is an opinion of an independent consultant about key sources of energy losses. It differentiates from the one commonly accepted. The main loser of energy is an energy sector - producers of energy and the distribution networks, responsible for transporting of energy, not the housing and the transportation sector. This opinion is based on the GCE Group's experience. The author proposes to focus the work to reduce energy losses on increasing the energy efficiency of energy sector, not on the end consumer. This will allow to reduce the cost of energy unit production and to reduce greenhouse gas emissions.

  13. Active Mothers Postpartum: a randomized controlled weight-loss intervention trial.

    Science.gov (United States)

    Østbye, Truls; Krause, Katrina M; Lovelady, Cheryl A; Morey, Miriam C; Bastian, Lori A; Peterson, Bercedis L; Swamy, Geeta K; Brouwer, Rebecca J N; McBride, Colleen M

    2009-09-01

    Pregnancy may contribute to overweight and obesity. The primary objective of Active Mothers Postpartum was to promote a reduction in BMI through 24-months postpartum via sustainable lifestyle changes. Behavioral intervention RCT to enhance postpartum weight loss. A total of 450 overweight or obese women, enrolled 6-weeks postpartum, were recruited through obstetrics clinics and community posters in the Durham NC area. Intervention participants were offered eight healthy-eating classes, ten physical-activity classes, and six telephone-counseling sessions over 9 months. Changes from baseline (6-weeks postpartum) to 1-month post-intervention (12-months postpartum) in: (1) diet (caloric intake, calories from fat, intake of certain foods); (2) physical activity (self-reported physical activity, television time); and (3) weight (collected 2004-2007, analyzed 2007-2008). Mean weight loss was 0.90 kg (+/-5.1 kg) in the intervention group and 0.36 kg (+/-4.9 kg) in the control group; this difference was not significant. There were also no significant group differences in improvement of diet or increased physical activity. In secondary analyses, there was a positive bivariate relationship between classes attended and weight loss (p=0.01). There were no significant differences among the arms in diet, physical activity, or weight change. Home-based interventions via mail, telephone, or Internet/e-mail may be more feasible and successful in this population. The postpartum period is an important phase in women's lives with regard to weight retention, but engaging them during this busy period remains a challenge. NCT00212251.

  14. Hearing loss in civilian airline and helicopter pilots compared to air traffic control personnel.

    Science.gov (United States)

    Wagstaff, Anthony S; Arva, Per

    2009-10-01

    In order to investigate possible hearing loss as a consequence of aviation noise, a comparative analysis of audiometric data from Norwegian Air Traffic Control (ATC) personnel, airline (fixed-wing) pilots, and helicopter pilots was performed. The results may be of use in giving advice regarding preventive measures. Male ATC, airline, and helicopter pilots were selected randomly from the Civil Aviation Authority (CAA) medical files. There were 182 subjects included in the study: 50, 81, and 51 subjects for ATC, helicopter, and airline pilots, respectively. Two audiograms with a 2-3-yr interval were analyzed for each individual. Age correction was performed using data from ISO 7129. Threshold changes per year for the frequencies 3, 4, and 6 kHz were examined in particular after age correction. For all three groups, mean hearing threshold levels were above (worse than) ISO 7129 predictions for most frequencies. As expected, hearing thresholds increased with age in the group as a whole. Looking at the 3-, 4-, and 6-kHz frequencies in particular, all groups had small but highly significant increases in hearing thresholds at 4 kHz between the first and second audiogram. The mean hearing thresholds for this group of aviation personnel are higher than International Standard ISO-7129 would predict according to age. Highly significant changes in hearing threshold after age correction, indicating possible noise-induced hearing loss, were found in all groups at 4 kHz. The fact that helicopter pilots had similar hearing loss to their other aviation colleagues indicates that current hearing protection for these pilots is effective in counteracting the increased noise levels in helicopters.

  15. A methodology for the estimation of release of fission products during LOCA with loss of ECCS

    International Nuclear Information System (INIS)

    Lele, H.G.; Majumdar, P.; Mukhopadhyay, D.; Gupta, S.K.; Venkat Raj, V.

    2002-01-01

    A Loss of Coolant Accident (LOCA) in a nuclear reactor along with the failure of the Emergency Core Cooling System can cause sustained voiding of the core. In such a situation the core experiences very low flow which leads to poor heat removal from the reactor core. The heat to be removed from the core includes stored heat, heat generated due to metal water reaction at high temperatures, decay heat etc. The poor heat removal leads to heating of the fuel pins to high temperatures. The heating of fuel pins is further enhanced due to metal-water reaction at high temperatures. These high temperatures of the fuel pins can lead to fission product release, which is transported into the Primary Heat Transport (PHT) system and can enter the containment through the break. Analysis is involved due to the complexity of the system and the phenomena to be simulated. In this paper a multistage analysis methodology is presented that involves the development and application of a number of computer programs to model the various phenomena involved. The computer code PHTACT computes the activity release from the fuel as a function of fuel temperatures and cladding oxidation, its distribution into the PHT system and release into the containment. Computation of thermal hydraulic parameters during LOCA is done using the thermal hydraulic analysis code RELAP5. The detailed simulation of fuel pin temperatures is done using computer code HT/MOD4. The convective boundary conditions required for the code are obtained from RELAP5. Creep deformation is considered in the computation of dimensional changes of the coolant channel and estimation of flow blockage due to clad ballooning. The progression of various reaction layers due to high temperature reaction between fuel and clad and clad and steam is also computed, which affects the structural strength of the clad. Different approaches are possible and analysis can be carried out in different phases depending upon the complexities to be

  16. Production process and quality control for the HTTR fuel

    International Nuclear Information System (INIS)

    Yoshimuta, S.; Suzuki, N.; Kaneko, M.; Fukuda, K.

    1991-01-01

    Development of the production and inspection technology for High Temperature Engineering Test Reactor (HTTR) fuel has been carried out by cooperative work between Japan Atomic Energy Research Institute (JAERI) and Nuclear Fuel Industries, Ltd (NFI). The performance and the quality level of the developed fuel are well established to meet the design requirements of the HTTR. For the commercial scale production of the fuel, statistical quality control and quality assurance must be carefully considered in order to assure the safety of the HTTR. It is also important to produce the fuel under well controlled process condition. To meet these requirements in the production of the HTTR fuel, a new production process and quality control system is to be introduced in the new facilities. The main feature of the system is a computer integrated control system. Process control data at each production stage of products and semi-products are all gathered by terminal computers and processed by a host computer. The processed information is effectively used for the production, quality and accountancy control. With the aid of this system, all the products will be easily traceable from starting materials to final stages and the statistical evaluation of the quality of products becomes more reliable. (author). 8 figs

  17. 46 CFR 164.019-13 - Production quality control requirements.

    Science.gov (United States)

    2010-10-01

    ... establish procedures for maintaining quality control of the materials used in production, manufacturing... place of manufacture unless alternate procedures have been accepted by the Commandant. (c) Production... manufactured. A new lot must be started whenever any change is made in materials, design, or production method...

  18. XML Survey of the productivity loss due to heat stress in different tasks of farmers in Darreh Shahr city

    Directory of Open Access Journals (Sweden)

    M. R. Monazzam Esmaielpou

    2015-09-01

    Full Text Available Introduction: Heat is one of the hazardous physical agents in the workplace. Exposure to heat and consequent thermal stress influence workers productivity in addition to adverse health effects. The aim of this study was to determine the heat stress induced productivity loss related to different tasks of farmers in Darreh Shahr city, during summer. Material and Method: This cross-sectional study was conducted in summer, 2014, among farmers in Darreh Shahr city. After determining the sample size, farmers’ activities were determined using hierarchical task analysis (HTA, and WBGT measurements were done according to the ISO7243. Metabolism was estimated by the ISO8996. Following, the type of activities were identified according their required metabolism. Knowing WBGT and workload and using the work capacity model, the productivity loss in different tasks and ultimately total productivity loss were calculated. Result: The mean WBGT activities for plowing, terracing, planting seeds, watering, fertilizing, weeding, spraying, and harvesting were 29.98 °C, 31.28 °C,30.66 °C,31.39 °C,31.99 °C,31.75 °C,31.08 °C, and 30.3 °C, respectively. WBGT values were higher than the permissible level provided by ISO7243 in all farming activities. Maximum value of WBGT was belonged to fertilizing activity (31.99 °C and the lowest value was for plowing (29.98 °C. ANOVA test results did not show a significant difference in WBGT at head, waist, and ankle height. The highest and lowest amount of productivity loss was estimated respectively for weeding and plowing activities. The total productivity loss for farming was calculated 69.3 percent in an hour which is due to high physical activity, working outdoor, with exposure to direct solar radiation, and consequent heat stress imposed to workers. Conclusion: Productivity is a factor which is affected by the workplace heat stress. According to results of the present research, the amount of productivity is reduced

  19. Survey of the productivity loss due to heat stress in different tasks of farmers in Darreh Shahr city

    Directory of Open Access Journals (Sweden)

    M. R. Monazzam Esmaielpour

    2015-09-01

    Full Text Available Introduction: Heat is one of the hazardous physical agents in the workplace. Exposure to heat and consequent thermal stress influence workers productivity in addition to adverse health effects. The aim of this study was to determine the heat stress induced productivity loss related to different tasks of farmers in Darreh Shahr city, during summer. . Material and Method: This cross-sectional study was conducted in summer, 2014, among farmers in Darreh Shahr city. After determining the sample size, farmers’ activities were determined using hierarchical task analysis (HTA, and WBGT measurements were done according to the ISO7243. Metabolism was estimated by the ISO8996. Following, the type of activities were identified according their required metabolism. Knowing WBGT and workload and using the work capacity model, the productivity loss in different tasks and ultimately total productivity loss were calculated. .Result: The mean WBGT activities for plowing, terracing, planting seeds, watering, fertilizing, weeding, spraying, and harvesting were 29.98 °C, 31.28 °C,30.66 °C,31.39 °C,31.99 °C,31.75 °C,31.08 °C, and 30.3 °C, respectively. WBGT values were higher than the permissible level provided by ISO7243 in all farming activities. Maximum value of WBGT was belonged to fertilizing activity (31.99 °C and the lowest value was for plowing (29.98 °C. ANOVA test results did not show a significant difference in WBGT at head, waist, and ankle height. The highest and lowest amount of productivity loss was estimated respectively for weeding and plowing activities. The total productivity loss for farming was calculated 69.3 percent in an hour which is due to high physical activity, working outdoor, with exposure to direct solar radiation, and consequent heat stress imposed to workers. .Conclusion: Productivity is a factor which is affected by the workplace heat stress. According to results of the present research, the amount of productivity is

  20. Ozone induced leaf loss and decreased leaf production of European Holly (Ilex aquifolium L.) over multiple seasons

    International Nuclear Information System (INIS)

    Ranford, Jonathan; Reiling, Kevin

    2007-01-01

    European Holly (Ilex aquifolium L.) was used to study the impact of one short (28 day) ozone fumigation episode on leaf production, leaf loss and stomatal conductance (g s ), in order to explore potential longer term effects over 3 growing seasons. Young I. aquifolium plants received an episode of either charcoal-filtered air or charcoal-filtered air with 70 nl l -1 O 3 added for 7 h d -1 over a 28 day period from June 15th 1996, then placed into ambient environment, Stoke-on-Trent, U.K. Data were collected per leaf cohort over the next three growing seasons. Ozone exposure significantly increased leaf loss and stomatal conductance and reduced leaf production over all subsequent seasons. Impact of the initial ozone stress was still detected in leaves that had no direct experimental ozone exposure. This study has shown the potential of ozone to introduce long-term phenological perturbations into ecosystems by influencing productivity over a number of seasons. - Ozone significantly alters Ilex aquifolium leaf production and loss over multiple seasons

  1. Vertical stability, high elongation, and the consequences of loss of vertical control on DIII-D

    International Nuclear Information System (INIS)

    Kellman, A.G.; Ferron, J.R.; Jensen, T.H.; Lao, L.L.; Luxon, J.L.; Skinner, D.G.; Strait, E.J.; Reis, E.; Taylor, T.S.; Turnbull, A.D.; Lazarus, E.A.; Lister, J.B.

    1990-09-01

    Recent modifications to the vertical control system for DIII-D has enabled operation of discharges with vertical elongation κ, up to 2.5. When vertical stability is lost, a disruption follows and a large vertical force on the vacuum vessel is observed. The loss of plasma energy begins when the edge safety factor q is 2 but the current decay does not begin until q ∼1.3. Current flow on the open field lines in the plasma scrapeoff layer has been measured and the magnitude and distribution of these currents can explain the observed force on the vessel. Equilibrium calculations and simulation of this vertical displacement episode are presented. 7 refs., 4 figs

  2. Validation of Safety-Critical Systems for Aircraft Loss-of-Control Prevention and Recovery

    Science.gov (United States)

    Belcastro, Christine M.

    2012-01-01

    Validation of technologies developed for loss of control (LOC) prevention and recovery poses significant challenges. Aircraft LOC can result from a wide spectrum of hazards, often occurring in combination, which cannot be fully replicated during evaluation. Technologies developed for LOC prevention and recovery must therefore be effective under a wide variety of hazardous and uncertain conditions, and the validation framework must provide some measure of assurance that the new vehicle safety technologies do no harm (i.e., that they themselves do not introduce new safety risks). This paper summarizes a proposed validation framework for safety-critical systems, provides an overview of validation methods and tools developed by NASA to date within the Vehicle Systems Safety Project, and develops a preliminary set of test scenarios for the validation of technologies for LOC prevention and recovery

  3. Mechanisms of weight loss, diabetes control and changes in food choices after gastrointestinal surgery.

    Science.gov (United States)

    Papamargaritis, Dimitrios; Panteliou, Eleftheria; Miras, Alexander D; le Roux, Carel W

    2012-12-01

    The long-term effects of lifestyle changes, diet and medical therapy on obesity are limited. Bariatric surgery is the most effective long-term treatment with the greatest chances for amelioration of obesity-associated complications, including type 2 diabetes mellitus (T2DM). There is increasing evidence in the literature that bariatric operations have a profound effect on human physiology, by reducing hunger, increasing satiety, paradoxically increasing energy expenditure, and even promoting healthy food preferences. Some of these operations improve glucose homeostasis in patients with T2DM independently of weight loss. Changes in the gut hormone levels of glucagon-like peptide 1, peptide YY and ghrelin have been proposed as some of the mediators implicated in changing physiology. The aim of this review is to critically explore the current knowledge on the putative mechanisms of the change in weight and improvement in T2DM glycaemic control after the most commonly performed bariatric operations.

  4. Possible control scenario of radial electric field by loss-cone-particle injection into helical device

    International Nuclear Information System (INIS)

    Motojima, Osamu; Shishkin, A.A.; Inagaki, Shigeru; Watanabe, Kiyomasa

    1999-08-01

    The possibility of controlling the radial electric field of toroidal plasmas by injecting high energy electrons along the reversible loss cone orbit of the helical magnetic traps is investigated. It is well known that the radial electric field plays an important role in the confinement improvement scenario especially in the low collisional regime under the physics picture of neoclassical theory. For this purpose, it is made clear that the most suitable particles are transit particles, which show a transition from helically trapped orbits to blocked ones. It is also found that a parallel AC electric field launched from outside assists this transition and makes it possible for particles to penetrate deeply into the plasma. In addition we clarify that the viscosity of the plasma coupled with the helical field configuration provide a bifurcation of plasma states and its stable solution results in confinement improvement. (author)

  5. Subscale Flight Testing for Aircraft Loss of Control: Accomplishments and Future Directions

    Science.gov (United States)

    Cox, David E.; Cunningham, Kevin; Jordan, Thomas L.

    2012-01-01

    Subscale flight-testing provides a means to validate both dynamic models and mitigation technologies in the high-risk flight conditions associated with aircraft loss of control. The Airborne Subscale Transport Aircraft Research (AirSTAR) facility was designed to be a flexible and efficient research facility to address this type of flight-testing. Over the last several years (2009-2011) it has been used to perform 58 research flights with an unmanned, remotely-piloted, dynamically-scaled airplane. This paper will present an overview of the facility and its architecture and summarize the experimental data collected. All flights to date have been conducted within visual range of a safety observer. Current plans for the facility include expanding the test volume to altitudes and distances well beyond visual range. The architecture and instrumentation changes associated with this upgrade will also be presented.

  6. Controlling the opto-mechanics of a cantilever in an interferometer via cavity loss

    Energy Technology Data Exchange (ETDEWEB)

    Schmidsfeld, A. von, E-mail: avonschm@uos.de; Reichling, M., E-mail: reichling@uos.de [Fachbereich Physik, Universität Osnabrück, Barbarastraße 7, 49076 Osnabrück (Germany)

    2015-09-21

    In a non-contact atomic force microscope, based on interferometric cantilever displacement detection, the optical return loss of the system is tunable via the distance between the fiber end and the cantilever. We utilize this for tuning the interferometer from a predominant Michelson to a predominant Fabry-Pérot characteristics and introduce the Fabry-Pérot enhancement factor as a quantitative measure for multibeam interference in the cavity. This experimentally easily accessible and adjustable parameter provides a control of the opto-mechanical interaction between the cavity light field and the cantilever. The quantitative assessment of the light pressure acting on the cantilever oscillating in the cavity via the frequency shift allows an in-situ measurement of the cantilever stiffness with remarkable precision.

  7. Personal control over indoor climate and productivity

    NARCIS (Netherlands)

    Boerstra, A.C.; Loomans, M.G.L.C.; Hensen, J.L.M.

    2014-01-01

    A multilayer study was designed to investigate how having or not having control over one’s indoor climate affects work performance in office buildings. The study consisted of 2 stages. The HOPE database (with results from a large study in 64 European office buildings) was reanalyzed on correlations

  8. Optimal control of raw timber production processes

    Science.gov (United States)

    Ivan Kolenka

    1978-01-01

    This paper demonstrates the possibility of optimal planning and control of timber harvesting activ-ities with mathematical optimization models. The separate phases of timber harvesting are represented by coordinated models which can be used to select the optimal decision for the execution of any given phase. The models form a system whose components are connected and...

  9. FUNDAMENTAL PARAMETERS, INTEGRATED RED GIANT BRANCH MASS LOSS, AND DUST PRODUCTION IN THE GALACTIC GLOBULAR CLUSTER 47 TUCANAE

    International Nuclear Information System (INIS)

    McDonald, I.; Zijlstra, A. A.; Boyer, M. L.; Gordon, K.; Meixner, M.; Sewilo, M.; Shiao, B.; Whitney, B.; Van Loon, J. Th.; Hora, J. L.; Robitaille, T.; Babler, B.; Meade, M.; Block, M.; Misselt, K.

    2011-01-01

    Fundamental parameters and time evolution of mass loss are investigated for post-main-sequence stars in the Galactic globular cluster 47 Tucanae (NGC 104). This is accomplished by fitting spectral energy distributions (SEDs) to existing optical and infrared photometry and spectroscopy, to produce a true Hertzsprung-Russell diagram. We confirm the cluster's distance as d = 4611 +213 -200 pc and age as 12 ± 1 Gyr. Horizontal branch models appear to confirm that no more red giant branch mass loss occurs in 47 Tuc than in the more metal-poor ω Centauri, though difficulties arise due to inconsistencies between the models. Using our SEDs, we identify those stars that exhibit infrared excess, finding excess only among the brightest giants: dusty mass loss begins at a luminosity of ∼1000 L sun , becoming ubiquitous above L = 2000 L sun . Recent claims of dust production around lower-luminosity giants cannot be reproduced, despite using the same archival Spitzer imagery.

  10. Photochemically induced carbon dioxide production as a mechanism for carbon loss from plant litter in arid ecosystems

    Science.gov (United States)

    Brandt, L. A.; Bohnet, C.; King, J. Y.

    2009-06-01

    We investigated the potential for abiotic mineralization to carbon dioxide (CO2) via photodegradation to account for carbon (C) loss from plant litter under conditions typical of arid ecosystems. We exposed five species of grass and oak litter collected from arid and mesic sites to a factorial design of ultraviolet (UV) radiation (UV pass, UV block), and sterilization under dry conditions in the laboratory. UV pass treatments produced 10 times the amount of CO2 produced in UV block treatments. CO2 production rates were unaffected by litter chemistry or sterilization. We also exposed litter to natural solar radiation outdoors on clear, sunny days close to the summer solstice at midlatitudes and found that UV radiation (280-400 nm) accounted for 55% of photochemically induced CO2 production, while shortwave visible radiation (400-500 nm) accounted for 45% of CO2 production. Rates of photochemically induced CO2 production on a per-unit-mass basis decreased with litter density, indicating that rates depend on litter surface area. We found no evidence for leaching, methane production, or facilitation of microbial decomposition as alternative mechanisms for significant photochemically induced C loss from litter. We conclude that abiotic mineralization to CO2 is the primary mechanism by which C is lost from litter during photodegradation. We estimate that CO2 production via photodegradation could be between 1 and 4 g C m-2 a-1 in arid ecosystems in the southwestern United States. Taken together with low levels of litter production in arid systems, photochemical mineralization to CO2 could account for a significant proportion of annual carbon loss from litter in arid ecosystems.

  11. Beyond deficit or compensation: new insights on postural control after long-term total visual loss.

    Science.gov (United States)

    Russo, Maitê M; Lemos, Thiago; Imbiriba, Luís A; Ribeiro, Nathalia L; Vargas, Claudia D

    2017-02-01

    Loss of vision is well known to affect postural control in blind subjects. This effect has classically been framed in terms of deficit or compensation depending on whether body sway increases or decreases in comparison with that of sighted subjects with the eyes open. However, studies have shown that postural responses can be modulated by the context and that changes in postural sway may not necessarily mean a worsened or improved postural control. The goal of our study was to test whether balance is affected by the context in blind subjects. Additional to the quantification of center of pressure (COP) displacement, measurements of body motion (COG) and the correspondent net neuromuscular response (COP-COG) were evaluated in anterior-posterior and medial-lateral directions. Thirty-eight completely blind and thirty-two sighted subjects participated of this study. The volunteers were asked to stand barefoot on a force platform for 60 s in two different conditions: feet apart and feet together. Sighted participants performed the tests with both the eyes open and eyes closed. Results showed that the COP-COG displacements in the blind group were greater than those of the sighted group with eyes open in almost all conditions tested, but not in eyes closed condition. However, the COP and COG results confirmed that the postural responses were context dependent. Together these results suggest that total visual loss does not just lead to a balance deficit or compensation, but to a specific postural signature that might imply in enhancing COP, COG and/or COP-COG in specific postural conditions.

  12. Challenges of a community based pragmatic, randomised controlled trial of weight loss maintenance.

    Science.gov (United States)

    Randell, Elizabeth; McNamara, Rachel; Shaw, Christine; Espinasse, Aude; Simpson, Sharon Anne

    2015-12-18

    Randomised controlled trials (RCTs) have a reputation for being inherently difficult to deliver as planned and often face unforeseen challenges and delays, particularly in relation to organisational and governance difficulties, participant interest, constraints due to allocation of costs, local investigator interest and lengthy bureaucracy. Recruitment is often difficult and the challenges faced often impact on the cost and delivery of a successful trial within the funded period. This paper reflects upon the challenges faced in delivering a pragmatic RCT of weight loss maintenance in a community setting and suggests some potential solutions. The weight loss maintenance in adults trial aimed to evaluate the impact of a 12 month, individually tailored weight maintenance intervention on BMI 3 years from randomisation. Participants were recruited primarily from participant identification centres (PICs)-GP surgeries, exercise on referral schemes and slimming world. The intervention was delivered in community settings. A recruitment strategy implementation plan was drafted to address and monitor poor recruitment. Delays in opening and recruitment were experienced early on. Some were beyond the control of the study team such as; disagreement over allocation of national health service costs and PIC classification as well as difficulties in securing support from research networks. That the intervention was delivered in community settings was often at the root of these issues. Key items to address at the design stage of future trials include feasibility of eligibility criteria. The most effective element of the recruitment implementation plan was to refocus sources of recruitment and target only those who could fulfil the eligibility criteria immediately. Learnings from this trial should be kept in mind by those designing similar studies in the future. Considering potential governance, cost and research network support implications at the design stage of pragmatic trials of

  13. Weight Loss and Glycemic Control after Sleeve Gastrectomy: Results from a Middle Eastern Center of Excellence.

    Science.gov (United States)

    Al Khalifa, Khalid; Al Ansari, Ahmed; Showaiter, May

    2018-02-01

    Obesity and its associated metabolic disorders are strongly linked to both morbidity and mortality. Sleeve gastrectomy (SG) has been established as an effective means of weight loss for obese patients as well as a treatment for type 2 diabetes mellitus (T2DM). This study was designed to examine the short- and midterm outcomes of patients who underwent SG in a Middle Eastern Center of Excellence, a military training teaching hospital. The clinical outcomes of 59 patients with impaired glucose tolerance and T2DM who underwent SG between 2011 and 2014 with at least one and up to four years of follow-up were studied. Data were collected and compared, including the pre- and post-surgery measures of weight, body mass index, glycosylated hemoglobin (HbA1c), and fasting blood glucose. Complete remission was defined as a fasting blood glucose level ≤100 mg/dL, an HbA1c ≤6 mg/dL, without use of antidiabetic medications. All patients showed significant reduction in body mass index following SG. Tight glycemic control was achieved among both diabetic and prediabetic patients. In this study, 88.14 per cent of all patients (diabetic and prediabetic) achieved complete resolution from their impaired glucose tolerance and T2DM and maintained normal blood glucose and HbA1C levels from one to four years postoperatively. SG is beneficial both in terms of short- and midterm weight loss and glucose control in both diabetic and prediabetic obese patients.

  14. Regenerative Braking Compensatory Control Strategy Considering CVT Power Loss for Hybrid Electric Vehicles

    Directory of Open Access Journals (Sweden)

    Yang Yang

    2018-02-01

    Full Text Available Hybrid electric vehicles (HEV equipped with continuously variable transmission (CVT adjust the motor operating point continuously to achieve the optimal motor operating efficiency during regenerative braking. Traditional control strategies consider the CVT efficiency as constant, while the CVT efficiency varies in different operating conditions. In order to reflect the transmission efficiency more accurately during regenerative braking, the CVT theoretical torque loss model is firstly established which then leads to the battery–front motor–CVT joint operating efficiency model. The joint operating efficiency model indicates that the system efficiency is influenced by input speed, input torque, CVT speed ratio, and battery SOC (state of charge. The compensatory strategy for the front motor barking force is proposed to make full use of its braking power and the CVT speed ratio control strategy is modified to maintain the optimal operating efficiency of the system. The simulations are performed under three typical braking conditions and UDDS, NYCC, US06 respectively, the results show that the modified control strategy increases the front motor braking power and improves the system operating efficiency.

  15. Noise-induced hearing loss and associated factors among vector control workers in a Malaysian state.

    Science.gov (United States)

    Masilamani, Retneswari; Rasib, Abdul; Darus, Azlan; Ting, Anselm Su

    2014-11-01

    This study aims to determine the prevalence and associated factors of noise-induced hearing loss (NIHL) among vector control workers in the state of Negeri Sembilan, Malaysia. This was an analytical cross-sectional study conducted on 181 vector control workers who were working in district health offices in a state in Malaysia. Data were collected using a self-administered questionnaire and audiometry. Prevalence of NIHL was 26% among this group of workers. NIHL was significantly associated with the age-group of 40 years and older, length of service of 10 or more years, current occupational noise exposure, listening to loud music, history of firearms use, and history of mumps/measles infection. Following logistic regression, age of more than 40 years and noise exposure in current occupation were associated with NIHL with an odds ratio of 3.45 (95% confidence interval = 1.68-7.07) and 6.87 (95% confidence interval = 1.54-30.69), respectively, among this group of vector control workers. © 2012 APJPH.

  16. An empirical study of the effectiveness of electronic stability control system in reducing loss of vehicle control.

    Science.gov (United States)

    Papelis, Yiannis E; Watson, Ginger S; Brown, Timothy L

    2010-05-01

    A significant percentage of fatal vehicle crashes involve loss of control (LOC). Electronic stability control (ESC) is an active safety system that detects impending LOC and activates counter-measures that help the driver maintain or re-gain control. To assess the effectiveness of ESC in preventing LOC, an empirical study was conducted on a high-fidelity driving simulator. The ESC systems for two vehicles were incorporated into the simulator's dynamics code which was calibrated to ensure engineering validation. The study utilized three scenarios designed to recreate typical LOC situations, and was designed to assess the effects of ESC presence, vehicle type, scenario, age and gender. A total of 120 research participants completed the study. Results showed a statistically significant reduction in LOC with ESC compared to without ESC (F=52.72, p<0.0001). The study findings of 5% LOC with ESC and 30% without ESC match several epidemiological studies that have analyzed ESC effectiveness on real-world crashes, providing strong support to the use of driving simulation for studying driver behavior. Study conclusions suggest that wide-spread utilization of ESC is likely to reduce traffic fatalities. Copyright (c) 2009 Elsevier Ltd. All rights reserved.

  17. A Technique to Estimate the Equivalent Loss Resistance of Grid-Tied Converters for Current Control Analysis and Design

    DEFF Research Database (Denmark)

    Vidal, Ana; Yepes, Alejandro G.; Fernandez, Francisco Daniel Freijedo

    2015-01-01

    Rigorous analysis and design of the current control loop in voltage source converters (VSCs) requires an accurate modeling. The loop behavior can be significantly influenced by the VSC working conditions. To consider such effect, converter losses should be included in the model, which can be done...... by means of an equivalent series resistance. This paper proposes a method to identify the VSC equivalent loss resistance for the proper tuning of the current control loop. It is based on analysis of the closed-loop transient response provided by a synchronous proportional-integral current controller......, according to the internal model principle. The method gives a set of loss resistance values linked to working conditions, which can be used to improve the tuning of the current controllers, either by online adaptation of the controller gains or by open-loop adaptive adjustment of them according to prestored...

  18. Production control in HTGR fuel rod fabrication

    International Nuclear Information System (INIS)

    Downing, D.J.; Bailey, M.

    1979-06-01

    Purpose of this report was (1) to determine which techniques (Kalman Filter, weighted least squares, Shewhart control chart) are capable of detecting drift or step changes earliest in a manufacturing process, and (2) what method would work well in maintaining the manufacturing process at an acceptable level of quality. To solve part (1) simulation studies were performed for various test cases of interest. No single technique was superior in all of these cases, but the Kalman Filter appeared to be more robust to various process changes. The weighted least squares did a good job when the weight was near unity (0.9977) and failed when the weight was small (0.63). The Shewhart control chart is better for detecting step changes than for trends. Several methods wre compared to try to answer part (2). In this report the model building and forecasting was done using the methods of Box and Jenkins

  19. Decision making, impulse control and loss of willpower to resist drugs: a neurocognitive perspective.

    Science.gov (United States)

    Bechara, Antoine

    2005-11-01

    Here I argue that addicted people become unable to make drug-use choices on the basis of long-term outcome, and I propose a neural framework that explains this myopia for future consequences. I suggest that addiction is the product of an imbalance between two separate, but interacting, neural systems that control decision making: an impulsive, amygdala system for signaling pain or pleasure of immediate prospects, and a reflective, prefrontal cortex system for signaling pain or pleasure of future prospects. After an individual learns social rules, the reflective system controls the impulsive system via several mechanisms. However, this control is not absolute; hyperactivity within the impulsive system can override the reflective system. I propose that drugs can trigger bottom-up, involuntary signals originating from the amygdala that modulate, bias or even hijack the goal-driven cognitive resources that are needed for the normal operation of the reflective system and for exercising the willpower to resist drugs.

  20. Systematic Product Development of Control and Diagnosis Functionalities

    Science.gov (United States)

    Stetter, R.; Simundsson, A.

    2017-01-01

    In the scientific field of systematic product development a wide range of helpful methods, guidelines and tools were generated and published in recent years. Until now little special attention was given to design guidelines aiming at supporting product development engineers to design products that allow and support control or diagnosis functions. The general trend to ubiquitous computing and the first development steps towards cognitive systems as well as a general trend toward higher product safety, reliability and reduced total cost of ownership (TCO) in many engineering fields lead to a higher importance of control and diagnosis. In this paper a first attempt is made to formulate general valid guidelines how products can be developed in order to allow and to achieve effective and efficient control and diagnosis. The guidelines are elucidated on the example of an automated guided vehicle. One main concern of this paper is the integration of control and diagnosis functionalities into the development of complete systems which include mechanical, electrical and electronic subsystems. For the development of such systems the strategies, methods and tools of systematic product development have attracted significant attention during the last decades. Today, the functionality and safety of most products is to a large degree dependent on control and diagnosis functionalities. Still, there is comparatively little research concentrating on the integration of the development of these functionalities into the overall product development processes. The paper starts with a background describing Systematic Product Development. The second section deals with the product development of the sample product. The third part clarifies the notions monitoring, control and diagnosis. The following parts summarize some insights and formulate first hypotheses concerning control and diagnosis in Systematic Product Development.

  1. Analysis of total productive maintenance (TPM) implementation using overall equipment effectiveness (OEE) and six big losses: A case study

    Science.gov (United States)

    Martomo, Zenithia Intan; Laksono, Pringgo Widyo

    2018-02-01

    In improving the productivity of the machine, the management of the decision or maintenance policy must be appropriate. In Spinning II unit at PT Apac Inti Corpora, there are 124 ring frame machines that often have breakdown and cause a high downtime so that the production target is not achieved, so this research was conducted on the ring frame machine. This study aims to measure the value of equipment effectiveness, find the root cause of the problem and provide suggestions for improvement. This research begins with measuring the achievement of overall equipment effectiveness (OEE) value, then identifying the six big losses that occur. The results show that the average value of OEE in the ring frame machine is 79.96%, the effectiveness value is quite low because the standard of OEE value for world class company ideally is 85%. The biggest factor that influences the low value of OEE is performance rate with percentage factor six big losses at reduced speed losses of 17.303% of all time loss. Proposed improvement actions are the application of autonomous maintenance, providing training for operators and maintenance technicians and supervising operators in the workplace.

  2. The Analysis of the Contribution of Human Factors to the In-Flight Loss of Control Accidents

    Science.gov (United States)

    Ancel, Ersin; Shih, Ann T.

    2012-01-01

    In-flight loss of control (LOC) is currently the leading cause of fatal accidents based on various commercial aircraft accident statistics. As the Next Generation Air Transportation System (NextGen) emerges, new contributing factors leading to LOC are anticipated. The NASA Aviation Safety Program (AvSP), along with other aviation agencies and communities are actively developing safety products to mitigate the LOC risk. This paper discusses the approach used to construct a generic integrated LOC accident framework (LOCAF) model based on a detailed review of LOC accidents over the past two decades. The LOCAF model is comprised of causal factors from the domain of human factors, aircraft system component failures, and atmospheric environment. The multiple interdependent causal factors are expressed in an Object-Oriented Bayesian belief network. In addition to predicting the likelihood of LOC accident occurrence, the system-level integrated LOCAF model is able to evaluate the impact of new safety technology products developed in AvSP. This provides valuable information to decision makers in strategizing NASA's aviation safety technology portfolio. The focus of this paper is on the analysis of human causal factors in the model, including the contributions from flight crew and maintenance workers. The Human Factors Analysis and Classification System (HFACS) taxonomy was used to develop human related causal factors. The preliminary results from the baseline LOCAF model are also presented.

  3. The effect of a motivational intervention on weight loss is moderated by level of baseline controlled motivation

    Directory of Open Access Journals (Sweden)

    Tate Deborah F

    2010-01-01

    Full Text Available Abstract Background Clinic-based behavioral weight loss programs are effective in producing significant weight loss. A one-size-fits-all approach is often taken with these programs. It may be beneficial to tailor programs based on participants' baseline characteristics. Type and level of motivation may be an important factor to consider. Previous research has found that, in general, higher levels of controlled motivation are detrimental to behavior change while higher levels of autonomous motivation improve the likelihood of behavior modification. Methods This study assessed the outcomes of two internet behavioral weight loss interventions and assessed the effect of baseline motivation levels on program success. Eighty females (M (SD age 48.7 (10.6 years; BMI 32.0 (3.7 kg/m2; 91% Caucasian were randomized to one of two groups, a standard group or a motivation-enhanced group. Both received a 16-week internet behavioral weight loss program and attended an initial and a four-week group session. Weight and motivation were measured at baseline, four and 16 weeks. Hierarchical regression analysis was conducted to test for moderation. Results There was significant weight loss at 16-weeks in both groups (p p = 0.57 (standard group 3.4 (3.6 kg; motivation-enhanced group 3.9 (3.4 kg. Further analysis was conducted to examine predictors of weight loss. Baseline controlled motivation level was negatively correlated with weight loss in the entire sample (r = -0.30; p = 0.01. Statistical analysis revealed an interaction between study group assignment and baseline level of controlled motivation. Weight loss was not predicted by baseline level of controlled motivation in the motivation-enhanced group, but was significantly predicted by controlled motivation in the standard group. Baseline autonomous motivation did not predict weight change in either group. Conclusions This research found that, in participants with high levels of baseline controlled motivation

  4. Mental-Health Conditions, Barriers to Care, and Productivity Loss Among Officers in An Urban Police Department

    Science.gov (United States)

    Fox, Justin; Desai, Mayur M.; Britten, Karissa; Lucas, Georgina; Luneau, Renee; Rosenthal, Marjorie S.

    2014-01-01

    Background Police officers are frequently exposed to situations that can negatively impact their mental health. Methods We conducted this study of an urban police department to determine 1) the prevalence of post-traumatic stress disorder (PTSD), depression, and alcohol abuse; 2) patterns of and barriers to mental-health services utilization; and 3) the impact these conditions have on productivity loss. Results Among 150 officers, PTSD (24%), depression (9%), and alcohol abuse (19%) were common. Only 46.7% had ever sought mental-health services; the most commonly cited barriers to accessing services were concerns regarding confidentiality and the potential “negative career impact.” Officers with mental-health conditions had higher productivity loss (5.9% vs 3.4%, P police officers are common, and costly, yet most officers had never accessed mental-health services; many due to modifiable risk factors. PMID:23155671

  5. The estimated reduction in the odds of loss-of-control type crashes for sport utility vehicles equipped with electronic stability control.

    Science.gov (United States)

    Green, Paul E; Woodrooffe, John

    2006-01-01

    Using data from the NASS General Estimates System (GES), the method of induced exposure was used to assess the effects of electronic stability control (ESC) on loss-of-control type crashes for sport utility vehicles. Sport utility vehicles were classified into crash types generally associated with loss of control and crash types most likely not associated with loss of control. Vehicles were then compared as to whether ESC technology was present or absent in the vehicles. A generalized additive model was fit to assess the effects of ESC, driver age, and driver gender on the odds of loss of control. In addition, the effects of ESC on roads that were not dry were compared to effects on roads that were dry. Overall, the estimated percentage reduction in the odds of a loss-of-control crash for sport utility vehicles equipped with ESC was 70.3%. Both genders and all age groups showed reduced odds of loss-of-control crashes, but there was no significant difference between males and females. With respect to driver age, the maximum percentage reduction of 73.6% occurred at age 27. The positive effects of ESC on roads that were not dry were significantly greater than on roads that were dry.

  6. Short- and long-term production losses and repeatability of clinical mastitis in dairy cattle.

    NARCIS (Netherlands)

    Houben, E.H.P.; Dijkhuizen, A.A.; Arendonk, van J.A.M.; Huirne, R.B.M.

    1993-01-01

    Between 1985 and 1990, a study of 5313 lactations of 2477 Black and White cows was carried out. A stepwise least squares method was used to obtain unbiased estimates of milk, fat, and protein losses that were due to clinical mastitis and the carry-over effect from the previous lactation. Logistic

  7. Non-random species loss in bacterial communities reduces antifungal volatile production

    NARCIS (Netherlands)

    Hol, G.; Garbeva, P.; Hordijk, C.; Hundscheid, M.P.J.; Klein Gunnewiek, P.J.A.; Agtmaal, van M.; Boer, de W.

    2015-01-01

    The contribution of low-abundance microbial species to soil ecosystems is easily overlooked because there is considerable overlap between metabolic abilities (functional redundancy) of dominant and subordinate microbial species. Here we studied how loss of less abundant soil bacteria affected the

  8. Water loss in horticultural products. Modelling, data analysis and theoretical considerations

    NARCIS (Netherlands)

    Tijskens, L.M.M.; Jacob, S.; Schouten, R.E.; Fernandez-Trujillo, J.P.; Dos-Santos, N.; Vangdal, E.; Pagan, E.; Perez Pastor, A.

    2010-01-01

    The water loss of individual fruit (melon, plum and mandarin) was analysed using the traditional diffusion based approach and a kinetic approach. Applying simple non linear regression, both approaches are the same, resulting in a quite acceptable analysis. However, by applying mixed effects non

  9. Apparent rates of production and loss of dissolved gaseous mercury (DGM) in a southern reservoir lake (Tennessee, USA)

    International Nuclear Information System (INIS)

    Zhang Hong; Dill, Christopher

    2008-01-01

    Apparent rates of dissolved gaseous mercury (DGM) concentration changes in a southern reservoir lake (Cane Creek Lake, Cookeville, Tennessee) were investigated using the DGM data collected in a 12-month study from June 2003 to May 2004. The monthly mean apparent DGM production rates rose from January (3.2 pg L -1 /h), peaked in the summer months (June-August: 8.9, 8.0, 8.6 pg L -1 /h), and fell to the lowest in December (1.6 pg L -1 /h); this trend followed the monthly insolation march for both global solar radiation and UVA radiation. The monthly apparent DGM loss rates failed to show the similar trend with no consistent pattern recognizable. The spring and summer had higher seasonal mean apparent DGM production rates than the fall and winter (6.8, 9.0, 3.9, 5.0 pg L -1 /h, respectively), and the seasonal trend also appeared to closely follow the solar radiation variation. The seasonal apparent DGM loss featured similar rate values for the four seasons (5.5, 4.3, 3.3, and 3.9 pg L -1 /h for spring, summer, fall, and winter, respectively). Correlation was found of the seasonal mean apparent DGM production rate with the seasonal mean morning solar radiation (r = 0.9084, p < 0.01) and with the seasonal mean morning UVA radiation (r = 0.9582, p < 0.01). No significant correlation was found between the seasonal apparent DGM loss rate and the corresponding afternoon solar radiation (r = 0.5686 for global radiation and 0.6098 for UVA radiation). These results suggest that DGM production in the lake engaged certain photochemical processes, either primary or secondary, but the DGM loss was probably driven by some dark processes

  10. Developing of milled peat production control in Turveruukki Oy

    Energy Technology Data Exchange (ETDEWEB)

    Ljokkoi, R

    1985-01-01

    Control research on the production of milled peat has as its primary aim the ability to control the peat drying process under different weather and field conditions. Actual development work connected with production control was begun in 1982 with the clear aim of developing and applying in practice a monitoring adn control system complete with measuring equipment which would permit the drying process to be measured indirectly and weather forecasts to be used systematically in the planning of production at each individual peat site. During the 1984 production season development work reached the stage of experimental use. Experiences gained from trial use have been mainly positive and trial use of the manual system can be considered the first step in the application o the system. As regards the measuring technique, it is justified to say that an adequate technical level has already been attained and the correlation of the indirect measuring method with peat drying can be further improved by adjusting the location height of the evaporation meter. On the other hand, calculation of the length of the harvesting cycle requires further research, which from the point of view of practice must be orientated towards control of field conditions and changes in them during the production season. Although the application of the production control system is informative in nature, it is clearly of assistance when deciding how to carry out production. By means of this system iy id possible to achieve financial benefit in the form of lowered production costs and a larger harvest per hectare.

  11. Controlling nitrous oxide emissions from grassland livestock production systems

    NARCIS (Netherlands)

    Oenema, O.; Gebauer, G.; Rodriguez, M.; Sapek, A.; Jarvis, S.C.; Corré, W.J.; Yamulki, S.

    1998-01-01

    There is growing awareness that grassland livestock production systems are major sources of nitrous oxide (N2O). Controlling these emissions requires a thorough understanding of all sources and controlling factors at the farm level. This paper examines the various controlling factors and proposes

  12. Study of advanced control of ethanol production through continuous fermentation

    Directory of Open Access Journals (Sweden)

    AbdelHamid Ajbar

    2017-01-01

    Full Text Available This paper investigates the control of an experimentally validated model of production of bioethanol. The analysis of the open loop system revealed that the maximum productivity occurred at a periodic point. A robust control was needed to avoid instabilities that may occur when disturbances are injected into the process that may drive it toward or through the unstable points. A nonlinear model predictive controller (NLMPC was used to control the process. Simulation tests were carried out using three controlled variables: the ethanol concentration, the productivity and the inverse of the productivity. In the third configuration, the controller was required to seek the maximum operating point through the optimization capability built in the NLMPC algorithm. Simulation tests presented overall satisfactory closed-loop performance for both nominal servo and regulatory control problems as well as in the presence of modeling errors. The third control configuration managed to steer the process toward the existing maximum productivity even when the process operation or its parameters changed. For comparison purposes, a standard PI controller was also designed for the same control objectives. The PI controller yielded satisfactory performance when the ethanol concentration was chosen as the controlled variable. When, on the other hand, the productivity was chosen as the controlled output, the PI controller did not work properly and needed to be adjusted using gain scheduling. In all cases, it was observed that the closed-loop response suffered from slow dynamics, and any attempt to speed up the feedback response via tuning may result in an unstable behavior.

  13. Simulation Modeling Requirements for Loss-of-Control Accident Prevention of Turboprop Transport Aircraft

    Science.gov (United States)

    Crider, Dennis; Foster, John V.

    2012-01-01

    In-flight loss of control remains the leading contributor to aviation accident fatalities, with stall upsets being the leading causal factor. The February 12, 2009. Colgan Air, Inc., Continental Express flight 3407 accident outside Buffalo, New York, brought this issue to the forefront of public consciousness and resulted in recommendations from the National Transportation Safety Board to conduct training that incorporates stalls that are fully developed and develop simulator standards to support such training. In 2010, Congress responded to this accident with Public Law 11-216 (Section 208), which mandates full stall training for Part 121 flight operations. Efforts are currently in progress to develop recommendations on implementation of stall training for airline pilots. The International Committee on Aviation Training in Extended Envelopes (ICATEE) is currently defining simulator fidelity standards that will be necessary for effective stall training. These recommendations will apply to all civil transport aircraft including straight-wing turboprop aircraft. Government-funded research over the previous decade provides a strong foundation for stall/post-stall simulation for swept-wing, conventional tail jets to respond to this mandate, but turboprops present additional and unique modeling challenges. First among these challenges is the effect of power, which can provide enhanced flow attachment behind the propellers. Furthermore, turboprops tend to operate for longer periods in an environment more susceptible to ice. As a result, there have been a significant number of turboprop accidents as a result of the early (lower angle of attack) stalls in icing. The vulnerability of turboprop configurations to icing has led to studies on ice accumulation and the resulting effects on flight behavior. Piloted simulations of these effects have highlighted the important training needs for recognition and mitigation of icing effects, including the reduction of stall margins

  14. A new algorithm for optimum voltage and reactive power control for minimizing transmission lines losses

    International Nuclear Information System (INIS)

    Ghoudjehbaklou, H.; Danai, B.

    2001-01-01

    Reactive power dispatch for voltage profile modification has been of interest to power utilities. Usually local bus voltages can be altered by changing generator voltages, reactive shunts, ULTC transformers and SVCs. Determination of optimum values for control parameters, however, is not simple for modern power system networks. Heuristic and rather intelligent algorithms have to be sought. In this paper a new algorithm is proposed that is based on a variant of a genetic algorithm combined with simulated annealing updates. In this algorithm a fuzzy multi-objective a approach is used for the fitness function of the genetic algorithm. This fuzzy multi-objective function can efficiently modify the voltage profile in order to minimize transmission lines losses, thus reducing the operating costs. The reason for such a combination is to utilize the best characteristics of each method and overcome their deficiencies. The proposed algorithm is much faster than the classical genetic algorithm and cna be easily integrated into existing power utilities software. The proposed algorithm is tested on an actual system model of 1284 buses, 799 lines, 1175 fixed and ULTC transformers, 86 generators, 181 controllable shunts and 425 loads

  15. Mealtime family interactions in home environments of children with loss of control eating.

    Science.gov (United States)

    Czaja, Julia; Hartmann, Andrea Sabrina; Rief, Winfried; Hilbert, Anja

    2011-06-01

    Experimental and self-report studies have shown that parents have a strong influence on their normal or overweight children's eating behavior, i.e. through parental feeding behavior or communication. Studies in children with loss of control (LOC) eating that have investigated this relationship are scarce, and ecologically valid observational studies are missing. This study examined family functioning at mealtimes in home environments in 43 families of a child with LOC eating and 31 families of a child without LOC eating; the children were 8-13 years old. Familial interactions, child eating behavior, and parental mealtime behavior were assessed using the Mealtime Family Interaction Coding System, observation of bite speed of the child, and self-report questionnaires. Less healthy patterns of communication (U=201.53, pchild with LOC eating compared to those without LOC eating. Children with LOC eating (M=4.73, SD=1.88) ate faster than controls (M=3.71, SD=1.19; pchild's eating behavior. Parent-child communication training should be tested as an intervention for children with LOC episodes. Copyright © 2011 Elsevier Ltd. All rights reserved.

  16. Aircraft Loss of Control: Problem Analysis for the Development and Validation of Technology Solutions

    Science.gov (United States)

    Belcastro, Christine M.; Newman, Richard L.; Crider, Dennis A.; Klyde, David H.; Foster, John V.; Groff, Loren

    2016-01-01

    Aircraft loss of control (LOC) is a leading cause of fatal accidents across all transport airplane and operational classes. LOC can result from a wide spectrum of precursors (or hazards), often occurring in combination. Technologies developed for LOC prevention and recovery must therefore be effective under a wide variety of conditions and uncertainties, including multiple hazards, and the validation process must provide a means of assessing system effectiveness and coverage of these hazards. This paper provides a detailed description of a methodology for analyzing LOC as a dynamics and control problem for the purpose of developing effective technology solutions. The paper includes a definition of LOC based on several recent publications, a detailed description of a refined LOC accident analysis process that is illustrated via selected example cases, and a description of planned follow-on activities for identifying future potential LOC risks and the development of LOC test scenarios. Some preliminary considerations for LOC of Unmanned Aircraft Systems (UAS) and for their safe integration into the National Airspace System (NAS) are also discussed.

  17. Affective Aspects of Perceived Loss of Control and Potential Implications for Brain-Computer Interfaces.

    Science.gov (United States)

    Grissmann, Sebastian; Zander, Thorsten O; Faller, Josef; Brönstrup, Jonas; Kelava, Augustin; Gramann, Klaus; Gerjets, Peter

    2017-01-01

    Most brain-computer interfaces (BCIs) focus on detecting single aspects of user states (e.g., motor imagery) in the electroencephalogram (EEG) in order to use these aspects as control input for external systems. This communication can be effective, but unaccounted mental processes can interfere with signals used for classification and thereby introduce changes in the signal properties which could potentially impede BCI classification performance. To improve BCI performance, we propose deploying an approach that potentially allows to describe different mental states that could influence BCI performance. To test this approach, we analyzed neural signatures of potential affective states in data collected in a paradigm where the complex user state of perceived loss of control (LOC) was induced. In this article, source localization methods were used to identify brain dynamics with source located outside but affecting the signal of interest originating from the primary motor areas, pointing to interfering processes in the brain during natural human-machine interaction. In particular, we found affective correlates which were related to perceived LOC. We conclude that additional context information about the ongoing user state might help to improve the applicability of BCIs to real-world scenarios.

  18. Affective Aspects of Perceived Loss of Control and Potential Implications for Brain-Computer Interfaces

    Directory of Open Access Journals (Sweden)

    Sebastian Grissmann

    2017-07-01

    Full Text Available Most brain-computer interfaces (BCIs focus on detecting single aspects of user states (e.g., motor imagery in the electroencephalogram (EEG in order to use these aspects as control input for external systems. This communication can be effective, but unaccounted mental processes can interfere with signals used for classification and thereby introduce changes in the signal properties which could potentially impede BCI classification performance. To improve BCI performance, we propose deploying an approach that potentially allows to describe different mental states that could influence BCI performance. To test this approach, we analyzed neural signatures of potential affective states in data collected in a paradigm where the complex user state of perceived loss of control (LOC was induced. In this article, source localization methods were used to identify brain dynamics with source located outside but affecting the signal of interest originating from the primary motor areas, pointing to interfering processes in the brain during natural human-machine interaction. In particular, we found affective correlates which were related to perceived LOC. We conclude that additional context information about the ongoing user state might help to improve the applicability of BCIs to real-world scenarios.

  19. Engineering Documentation Control Handbook Configuration Management and Product Lifecycle Management

    CERN Document Server

    Watts, Frank B

    2011-01-01

    In this new edition of his widely-used Handbook, Frank Watts, widely recognized for his significant contributions to engineering change control processes, provides a thoroughly practical guide to the implementation and improvement of Engineering Documentation Control (EDC), Product Lifecycle Management and Product Configuration Management (CM). Successful and error-free implementation of EDC/CM is critical to world-class manufacturing. Huge amounts of time are wasted in most product manufacturing environments over EDC/CM issues such as interchangeability, document release and change control -

  20. Diversity and Control of Spoilage Fungi in Dairy Products: An Update

    Science.gov (United States)

    Valence, Florence; Mounier, Jérôme

    2017-01-01

    Fungi are common contaminants of dairy products, which provide a favorable niche for their growth. They are responsible for visible or non-visible defects, such as off-odor and -flavor, and lead to significant food waste and losses as well as important economic losses. Control of fungal spoilage is a major concern for industrials and scientists that are looking for efficient solutions to prevent and/or limit fungal spoilage in dairy products. Several traditional methods also called traditional hurdle technologies are implemented and combined to prevent and control such contaminations. Prevention methods include good manufacturing and hygiene practices, air filtration, and decontamination systems, while control methods include inactivation treatments, temperature control, and modified atmosphere packaging. However, despite technology advances in existing preservation methods, fungal spoilage is still an issue for dairy manufacturers and in recent years, new (bio) preservation technologies are being developed such as the use of bioprotective cultures. This review summarizes our current knowledge on the diversity of spoilage fungi in dairy products and the traditional and (potentially) new hurdle technologies to control their occurrence in dairy foods. PMID:28788096

  1. Diversity and Control of Spoilage Fungi in Dairy Products: An Update

    Directory of Open Access Journals (Sweden)

    Lucille Garnier

    2017-07-01

    Full Text Available Fungi are common contaminants of dairy products, which provide a favorable niche for their growth. They are responsible for visible or non-visible defects, such as off-odor and -flavor, and lead to significant food waste and losses as well as important economic losses. Control of fungal spoilage is a major concern for industrials and scientists that are looking for efficient solutions to prevent and/or limit fungal spoilage in dairy products. Several traditional methods also called traditional hurdle technologies are implemented and combined to prevent and control such contaminations. Prevention methods include good manufacturing and hygiene practices, air filtration, and decontamination systems, while control methods include inactivation treatments, temperature control, and modified atmosphere packaging. However, despite technology advances in existing preservation methods, fungal spoilage is still an issue for dairy manufacturers and in recent years, new (bio preservation technologies are being developed such as the use of bioprotective cultures. This review summarizes our current knowledge on the diversity of spoilage fungi in dairy products and the traditional and (potentially new hurdle technologies to control their occurrence in dairy foods.

  2. The role of production control in the development of burnout.

    Science.gov (United States)

    Houben, G J; Nijhuis, F J

    1996-01-01

    Burnout is an increasingly important problem in modern work organizations. Few studies, however, have explicitly applied an adequate theoretical understanding of the performance of modern organizations. This article aims to initiate both a discussion of this phenomenon and higher-quality research into the emergence of burnout based on an understanding of the economic-technological rationalization and control (management control) of production and service processes. In applying production control, both technical and bureaucratic, group and attitudinal control systems are increasingly integrated. This so-called systematic control strategy is one of the major causes of burnout. The cumulative effect of an increasing workload combined with reduced resources due to economic considerations and technocratic implementation of production control is assumed to be relevant to the development of burnout. The authors' propositions apply to service workers in human service organizations and to key workers in enterprises using flexible specialization combined with self-directed work groups.

  3. Loss of retrovirus production in JB/RH melanoma cells transfected with H-2Kb and TAP-1 genes.

    Science.gov (United States)

    Li, M; Xu, F; Muller, J; Huang, X; Hearing, V J; Gorelik, E

    1999-01-20

    JB/RH1 melanoma cells, as well as other melanomas of C57BL/6 mice (B16 and JB/MS), express a common melanoma-associated antigen (MAA) encoded by an ecotropic melanoma-associated retrovirus (MelARV). JB/RH1 cells do not express the H-2Kb molecules due to down-regulation of the H-2Kb and TAP-1 genes. When JB/RH1 cells were transfected with the H-2Kb and cotransfected with the TAP-1 gene, it resulted in the appearance of H-2Kb molecules and an increase in their immunogenicity, albeit they lost expression of retrovirus-encoded MAA recognized by MM2-9B6 mAb. Loss of MAA was found to result from a complete and stable elimination of ecotropic MelARV production in the H-2Kb/TAP-1-transfected JB/RH1 cells. Northern blot analysis showed no differences in ecotropic retroviral messages in MelARV-producing and -nonproducing melanoma cells, suggesting that loss of MelARV production was not due to down-regulation of MelARV transcription. Southern blot analysis revealed several rearrangements in the proviral DNA of H-2Kb-positive JB/RH1 melanoma cells. Sequence analysis of the ecotropic proviral DNA from these cells showed numerous nucleotide substitutions, some of which resulted in the appearance of a novel intraviral PstI restriction site and the loss of a HindIII restriction site in the pol region. PCR amplification of the proviral DNAs indicates that an ecotropic provirus found in the H-2Kb-positive cells is novel and does not preexist in the parental H-2Kb-negative melanoma cells. Conversely, the ecotropic provirus of the parental JB/RH1 cells was not amplifable from the H-2Kb-positive cells. Our data indicate that stable loss of retroviral production in the H-2Kb/TAP-1-transfected melanoma cells is probably due to the induction of recombination between a productive ecotropic MelARV and a defective nonecotropic provirus leading to the generation of a defective ecotropic provirus and the loss of MelARV production and expression of the retrovirus-encoded MAA. Copyright 1999

  4. An Investigation of Self-reported Health-related Productivity Loss in Office Workers and Associations With Individual and Work-related Factors Using an Employer's Perspective.

    Science.gov (United States)

    Pereira, Michelle Jessica; Johnston, Venerina; Straker, Leon Melville; Sjøgaard, Gisela; Melloh, Markus; O'Leary, Shaun Patrick; Comans, Tracy Anne

    2017-07-01

    Office workers have a high prevalence of musculoskeletal conditions. This can be a significant economic burden due to health-related productivity loss. Individual and work-related factors related to office worker health-related productivity were investigated. A survey including the Health and Work Performance Questionnaire, which estimated productivity loss, also recorded individual and work-related factors with potential associations with health-related productivity. Muscle function and workstation ergonomics were examined through physical assessments. Linear models investigated the relationships between these factors and health-related productivity. Significant factors identified were occupational category (0.001 productivity loss was greater in office workers working as managers, with lower job satisfaction and psychological wellbeing, and those with musculoskeletal pain. Office worker health-related productivity loss is represented by a combination of both individual and work-related factors.

  5. Metal loss from treated wood products in contact with municipal solid waste landfill leachate

    Energy Technology Data Exchange (ETDEWEB)

    Dubey, Brajesh [Department of Environmental Health, PO Box 70682, East Tennessee State University, Johnson City, TN 37614 (United States); Department of Environmental Engineering Sciences, University of Florida, Gainesville, FL 32611-6450 (United States); Townsend, Timothy, E-mail: ttown@ufl.edu [Department of Environmental Engineering Sciences, University of Florida, Gainesville, FL 32611-6450 (United States); Solo-Gabriele, Helena [Department of Civil, Architectural and Environmental Engineering, University of Miami, Coral Gables, FL 33124-0630 (United States)

    2010-03-15

    The research presented in this paper evaluates the potential impact of municipal solid waste (MSW) landfill leachate quality on the loss of metals from discarded treated wood during disposal. The loss of arsenic (As), chromium (Cr), copper (Cu), and boron (B) from several types of pressure-treated wood (CCA: chromated copper arsenate, ACQ: alkaline copper quaternary, CBA: copper boron azole, and DOT: disodium octaborate tetrahydrate) using leachate collected from 26 MSW landfills in Florida was examined. The toxicity characteristic leaching procedure (TCLP), the synthetic precipitation leaching procedure (SPLP), and California's waste extraction test (WET) were also performed. The results suggested that loss of preservative components was influenced by leachate chemistry. Copper loss from CCA-, ACQ- and CBA-treated wood was similar in magnitude when in contact with landfill leachates compared to synthetic TCLP and SPLP solutions. Ammonia was found as one of the major parameters influencing the leaching of Cu from treated wood when leached with MSW landfill leachates. The results suggest that disposal of ACQ- and CBA-treated wood in substantial quantity in MSW landfills may elevate the Cu concentration in the leachate; this could be of potential concern, especially for a bioreactor MSW landfill in which relatively higher ammonia concentrations in leachate have been reported in recent literature. For the As, Cr and B the concentrations observed with the landfill leachate as the leaching solutions were over a range from some sample showing the concentrations below and some showing above the observed value from corresponding SPLP and TCLP tests. In general the WET test showed the highest concentrations.

  6. The effect of a motivational intervention on weight loss is moderated by level of baseline controlled motivation

    OpenAIRE

    Webber, Kelly H; Gabriele, Jeanne M; Tate, Deborah F; Dignan, Mark B

    2010-01-01

    Abstract Background Clinic-based behavioral weight loss programs are effective in producing significant weight loss. A one-size-fits-all approach is often taken with these programs. It may be beneficial to tailor programs based on participants' baseline characteristics. Type and level of motivation may be an important factor to consider. Previous research has found that, in general, higher levels of controlled motivation are detrimental to behavior change while higher levels of autonomous mot...

  7. Rubella in Sub-Saharan Africa and sensorineural hearing loss: a case control study

    Directory of Open Access Journals (Sweden)

    Cristina Caroça

    2017-02-01

    Full Text Available Abstract Background Rubella infection can affect several organs and cause birth defects that are responsible for congenital rubella syndrome (CRS. Congenital hearing loss is the most common symptom of this syndrome, occurring in approximately 60% of CRS cases. Worldwide, over 100 000 babies are born with CRS every year. There is no specific treatment for rubella, but the disease is preventable by vaccination. Since 1969, the rubella vaccine has been implemented in many countries, but in Africa, only a few countries routinely immunize against rubella. The aim of this study was to estimate the rate of infection from the wild-type rubella virus in São Tomé and Príncipe by determining rubella seroprevalence with a DBS method. The goal of this study was to reinforce the need for implementation of the rubella vaccine in this country. As secondary objectives, the validation of a DBS method was first attempted and an association between seroprevalence and hearing loss was assessed. Methods We collected samples from individuals observed during humanitarian missions in São Tomé and Príncipe. All individuals underwent an audiometric evaluation, and a drop of blood was collected for the dried blood spot (DBS. We define two groups: the case group (individuals with unilateral or bilateral hearing loss (HL and the control group (individuals with two normal ears. Patients were excluded if they suffered from conductive HL, if they showed evidence of possible causes of HL, if they had developmental delay or if they refused to participate in the study. Results Among the 315 subjects, we found 64.1% individuals with IgG for the rubella virus, 32.1% without immunity for the rubella virus and 3.8% who were borderline. In the control group, 62.6% were positive for the rubella IgG, whereas in the case group, 72% were positive. Analyzing both groups, with ages ranging from 2 to 14 years of age and from 15 to 35 years of age, we found a seroprevalence of 50.3% to

  8. A guide for controlling consumer products containing radioactive substances

    International Nuclear Information System (INIS)

    1985-01-01

    Consumer products are considered regardless of the purpose for which the radionuclide is added. For example, the purpose may be to make use of the ionising radiation emitted by the substance in the product itself (e.g. radioluminescent devices antistatic devices and ionisation chamber smoke detectors), or to make use of some other property of the material where the presence of radiation in the final product is merely adventitious (e.g. thorium gas mantles, ceramics with uranium glazes, and products containing radioactive tracers added to facilitate manufacturing and inspection processes). The Guide does not cover some products containing natural radioactive substances which have not been intentionally added, such as building materials. The Guide does not cover medicinal products and pharmaceuticals, nuclear powered cardiac pacemakers, or electronic equipment, such as television receivers, that emit X-rays. Unlike the 1970 Guide, this Guide does not consider those products, such as EXIT signs, containing gaseous tritium light sources, that would not be supplied directly to members of the public. The Guide is concerned mainly with the exposure arising from consumer products of those persons who are not subject to any regulatory controls for purposes of radiation protection in normal circumstances. Members of the public come under this heading, but not workers involved in the manufacture of consumer products. These workers will normally be subject to separate control. Radiological protection concepts and policy for the control of radioactive consumer products and licensing and post-licensing surveillance are developed

  9. IMPLEMENTATION OF CONTROL CARDS AND SUPPORTING METHOD IN PRODUCTION ENGINEERING

    Directory of Open Access Journals (Sweden)

    Anna WOLNOWSKA

    2012-10-01

    Full Text Available In the article there were presented chosen method associated with statistical control of production processes. Mainly focused on control cards and Pareto‐Lorenz analysis. Showed method were implemented to analysis production process stability of hearing aids in X company (the brand name don’t give because date of production is secret. Researches were made few months after new assembly lines starts‐up. Main aim of researches was defects types identification occurred in production process and determine the scale of effect. Finally received results were satisfactory, i.e. despite of occurred errors, control cards analysis showed that production process of BTE‐type (Behind‐The‐Ear hearing aids was stable.

  10. Control panel and indicators for production control in building projects

    Directory of Open Access Journals (Sweden)

    Orihuela Pablo

    2018-02-01

    Full Text Available In general, every project should have indicators that monitor compliance with established goals. In con­struction projects, there are a large number of indicators proposed by many researchers; however, an analysis of the state of the art shows a frequent confusion between Result, Process and Leading Indicators. This paper, which is an extended version of the paper sub­mitted by the same authors at the Creative Construction Conference 2017 and published in Procedia Engineering (DOI: 10.1016/j.proeng.2017.07.230, presents a proposal of these three types of indicators for the design, supply and assembly phases of housing projects. Thus, all project stakeholders can have a control panel that will monitor if an indicator exceeds the limits, thereby allowing taking corrective actions in a timely and effective manner.

  11. Production, control and utilization of radioisotopes including radiopharmaceuticals

    International Nuclear Information System (INIS)

    Muenze, R.

    1985-05-01

    From April 29th to May 5th, 1984 27 participants from 21 developing countries stayed within an IAEA Study Tour ('Production, Control and Utilization of Radioisotopes including Radiopharmaceuticals') in the GDR. In the CINR, Rossendorf the reactor, the cyclotron, the technological centre as well as the animal test laboratory were visited. The participants were made familiar by 10 papers with the development, production and control of radiopharmaceuticals in the CINR, Rossendorf. (author)

  12. Virtual Factory Framework for Supporting Production Planning and Control.

    Science.gov (United States)

    Kibira, Deogratias; Shao, Guodong

    2017-01-01

    Developing optimal production plans for smart manufacturing systems is challenging because shop floor events change dynamically. A virtual factory incorporating engineering tools, simulation, and optimization generates and communicates performance data to guide wise decision making for different control levels. This paper describes such a platform specifically for production planning. We also discuss verification and validation of the constituent models. A case study of a machine shop is used to demonstrate data generation for production planning in a virtual factory.

  13. Method for ph-controlled fermentation and biogas production

    DEFF Research Database (Denmark)

    2014-01-01

    The present invention is in the field of biomass processing and bioenergy production and facilitates efficient biomass processing and an increased production of renewable energy from processing and anaerobic fermentation of a wide variety of organic materials. In order to control the pH value...

  14. Economic potentials of oil palm products and weed control on ...

    African Journals Online (AJOL)

    A study was carried out at the Research Farm of National Root Crops Research Institute Umudike, southeastern Nigeria (05o, 29'N, 07o 33'E and 122 m above sea level), in 2015 and 2016 cropping seasons to study the economic potentials of oil palm products and weed control on sustainable turmeric production and some ...

  15. Testing controlled productive knowledge of adverb-verb collocations ...

    African Journals Online (AJOL)

    The study also reveals that controlled productive knowledge of adverbverb collocations is less problematic. Based on these results, teaching strategies aimed at improving the use of adverb-verb collocations among EFL users are proposed. Keywords: academic writing, adverb-verb collocations, productive knowledge of ...

  16. Piloted Simulation Evaluation of a Model-Predictive Automatic Recovery System to Prevent Vehicle Loss of Control on Approach

    Science.gov (United States)

    Litt, Jonathan S.; Liu, Yuan; Sowers, Thomas S.; Owen, A. Karl; Guo, Ten-Huei

    2014-01-01

    This paper describes a model-predictive automatic recovery system for aircraft on the verge of a loss-of-control situation. The system determines when it must intervene to prevent an imminent accident, resulting from a poor approach. It estimates the altitude loss that would result from a go-around maneuver at the current flight condition. If the loss is projected to violate a minimum altitude threshold, the maneuver is automatically triggered. The system deactivates to allow landing once several criteria are met. Piloted flight simulator evaluation showed the system to provide effective envelope protection during extremely unsafe landing attempts. The results demonstrate how flight and propulsion control can be integrated to recover control of the vehicle automatically and prevent a potential catastrophe.

  17. Open-pit production and control at Roessing

    International Nuclear Information System (INIS)

    Hodson, D.; Rich, C.

    1986-01-01

    In recent years metal prices have been severely depressed and most companies have directed efforts to controlling costs in order to stay in business. Roessing Uranium has consistently kept uranium production cost increases well below the domestic inflation rate and this has been the result of a firm commitment to production and cost control, which is the main theme of this paper. The subject of cost analysis is briefly presented and the paper then gives more technical detail under the main headings of grade control, production control and engineering projects. The main communication channels, which are used to ensure that different departments on the mine are all working for the same objectives, are mentioned. The paper, however, is intended to be a general overview of the engineering aspects of open-pit cost control

  18. A methodology for determining and controlling the buffers before floating bottlenecks in heavy machinery production

    Directory of Open Access Journals (Sweden)

    R. Lenort

    2013-07-01

    Full Text Available Heavy machinery industry is characterized by a number of specific features that cause significant variations in the processing time of products in the individual workplaces and frequent occurrence of floating bottlenecks, which change their positions. Depending on the product range being processed, a given workplace is the bottleneck only for some period of time. When the bottleneck moves to another workplace, it leads to unnecessary loss of capacity of the floating bottleneck. To maximize the utilization, it is necessary to protect those bottlenecks by creating special buffers. The objective of this article is to design a methodology used for the determination and control of buffers that are going to protect the floating bottlenecks from operating capacity losses caused by transfer of the constrain to another workplace. These buffers are referred to as „power buffers“. The designed methodology has been verified in the process of forged pieces machining.

  19. Animated sulfonated or sulformethylated lignins as cement fluid loss control additives

    Energy Technology Data Exchange (ETDEWEB)

    Schilling, P.

    1991-05-07

    This patent describes a method of cementing a zone in a well penetrating a subterranean formation comprising injecting down the well and positioning in the zone to be cemented a hydraulic aqueous cement slurry composition. It comprises: a hydraulic cement, and the following expressed as parts by weight per 100 parts of the hydraulic cement, water from about 25 to 105 parts, and a fluid loss control additive comprising from about 0.5 to 2.5 parts of a compound selected from the group consisting of a sulfonated lignin and a sulfomethylated lignin, wherein the lignin has been aminated by reacting it with between about 2-5 moles of a polyamine and 2-5 moles of an aldehyde per 1,000g of the lignin, and 0.1 to 1.5 parts of a compound selected from the group consisting of sodium carbonate, sodium metasilicate, sodium phosphate, sodium sulfite and sodium naphthalene sulfonate and a combination thereof.

  20. Attentional Bias to Food Cues in Youth with Loss of Control Eating

    Science.gov (United States)

    Shank, Lisa M.; Tanofsky-Kraff, Marian; Nelson, Eric E.; Shomaker, Lauren B.; Ranzenhofer, Lisa M.; Hannallah, Louise M.; Field, Sara E.; Vannucci, Anna; Bongiorno, Diana M.; Brady, Sheila M.; Condarco, Tania; Demidowich, Andrew; Kelly, Nichole R.; Cassidy, Omni; Simmons, W. Kyle; Engel, Scott G.; Pine, Daniel S.; Yanovski, Jack A.

    2014-01-01

    Emerging data indicate that adults with binge eating may exhibit an attentional bias toward highly palatable foods, which may promote obesogenic eating patterns and excess weight gain. However, it is unknown to what extent youth with loss of control (LOC) eating display a similar bias. We therefore studied 76 youth (14.5±2.3y; 86.8% female; BMI-z 1.7± .73) with (n=47) and without (n=29) reported LOC eating. Following a breakfast to reduce hunger, youth participated in a computerized visual probe task of sustained attention that assessed reaction time to pairs of pictures consisting of high palatable foods, low palatable foods, and neutral household objects. Although sustained attentional bias did not differ by LOC eating presence and was unrelated to body weight, a two-way interaction between BMI-z and LOC eating was observed (p = .01), such that only among youth with LOC eating, attentional bias toward high palatable foods versus neutral objects was positively associated with BMI-z. These findings suggest that LOC eating and body weight interact in their association with attentional bias to highly palatable foods cues, and may partially explain the mixed literature linking attentional bias to food cues with excess body weight. PMID:25435490

  1. A preliminary examination of Loss of Control Eating Disorder (LOC-ED) in middle childhood.

    Science.gov (United States)

    Matherne, Camden E; Tanofsky-Kraff, Marian; Altschul, Anne M; Shank, Lisa M; Schvey, Natasha A; Brady, Sheila M; Galescu, Ovidiu; Demidowich, Andrew P; Yanovski, Susan Z; Yanovski, Jack A

    2015-08-01

    Loss of Control Eating Disorder (LOC-ED) has been proposed as a diagnostic category for children 6-12years with binge-type eating. However, characteristics of youth with LOC-ED have not been examined. We tested the hypothesis that the proposed criteria for LOC-ED would identify children with greater adiposity, more disordered eating attitudes, and greater mood disturbance than those without LOC-ED. Participants were 251 youth (10.29years±1.54, 53.8% female, 57.8% White, 35.5% Black, 2.0% Asian, 4.8% Hispanic, 53.0% overweight). Youth were interviewed regarding eating attitudes and behaviors, completed questionnaires to assess general psychopathology, and underwent measurements of body fat mass. Using previously proposed criteria for LOC-ED, children were classified as LOC-ED (n=19), LOC in the absence of the full disorder (subLOC, n=33), and youth not reporting LOC (noLOC, n=199). LOC-ED youth had higher BMIz (p=0.001) and adiposity (p=0.003) and reported greater disordered eating concerns (pdisordered eating attitudes (p=0.02). SubLOC youth had greater disordered eating concerns (pdisordered eating cognitions and anthropometric measures compared to youth without LOC-ED. Longitudinal studies are needed to determine if those with LOC-ED are at particularly increased risk for progression of disordered eating and excess weight gain. Published by Elsevier Ltd.

  2. A Preliminary Examination of Loss of Control Eating Disorder (LOC-ED) in Middle Childhood

    Science.gov (United States)

    Matherne, Camden E.; Tanofsky-Kraff, Marian; Altschul, Anne M.; Shank, Lisa M.; Schvey, Natasha A.; Brady, Sheila M.; Galescu, Ovidiu; Demidowich, Andrew P.; Yanovski, Susan Z.; Yanovski, Jack A.

    2015-01-01

    Loss of Control Eating Disorder (LOC-ED) has been proposed as a diagnostic category for children 6–12y with binge-type eating. However, characteristics of youth with LOC-ED have not been examined. We tested the hypothesis that the proposed criteria for LOC-ED would identify children with greater adiposity, more disordered eating attitudes, and greater mood disturbance than those without LOC-ED. Participants were 251 youth (10.29y ± 1.54, 53.8% female, 57.8 % White, 35.5% Black, 2.0% Asian, 4.8% Hispanic, 53.0% overweight). Youth were interviewed regarding eating attitudes and behaviors, completed questionnaires to assess general psychopathology, and underwent measurements of body fat mass. Using previously proposed criteria for LOC-ED, children were classified as LOC-ED (n = 19), LOC in the absence of the full disorder (subLOC, n = 33), and youth not reporting LOC (noLOC, n = 199). LOC-ED youth had higher BMIz (p = 0.001) and adiposity (p = 0.003) and reported greater disordered eating concerns (p eating attitudes (p = 0.02). SubLOC youth had greater disordered eating concerns (p eating cognitions and anthropometric measures compared to youth without LOC-ED. Longitudinal studies are needed to determine if those with LOC-ED are at particularly increased risk for progression of disordered eating and excess weight gain. PMID:25913008

  3. Loss of control eating and eating disorders in adolescents before bariatric surgery.

    Science.gov (United States)

    Utzinger, Linsey M; Gowey, Marissa A; Zeller, Meg; Jenkins, Todd M; Engel, Scott G; Rofey, Dana L; Inge, Thomas H; Mitchell, James E

    2016-10-01

    This study assessed loss of control (LOC) eating and eating disorders (EDs) in adolescents undergoing bariatric surgery for severe obesity. Preoperative baseline data from the Teen Longitudinal Assessment of Bariatric Surgery (Teen-LABS) multisite observational study (n = 242; median BMI = 51 kg/m 2 ; mean age= 17; 76% female adolescents; 72% Caucasian) included anthropometric and self-report questionnaires, including the Questionnaire of Eating and Weight Patterns-Revised (QEWP-R), the Night Eating Questionnaire (NEQ), the Beck Depression Inventory (BDI-II), and the Impact of Weight on Quality of Life-Kids (IWQOL-Kids) RESULTS: LOC eating (27%) was common and ED diagnoses included binge-eating disorder (7%), night eating syndrome (5%), and bulimia nervosa (1%). Compared to those without LOC eating, those with LOC eating reported greater depressive symptomatology and greater impairment in weight-related quality of life. Before undergoing bariatric surgery, adolescents with severe obesity present with problematic disordered eating behaviors and meet diagnostic criteria for EDs. LOC eating, in particular, was associated with several negative psychosocial factors. Findings highlight targets for assessment and intervention in adolescents before bariatric surgery. © 2016 Wiley Periodicals, Inc.(Int J Eat Disord 2016; 49:947-952). © 2016 Wiley Periodicals, Inc.

  4. Work-related productivity losses in an era of ageing populations: the case of colorectal cancer.

    Science.gov (United States)

    Hanly, Paul; Walsh, Paul M; O Céilleachair, Alan; Skally, Mairead; Staines, Anthony; Kapur, Kanika; Fitzpatrick, Patricia; Sharp, Linda

    2013-02-01

    We investigated patterns and costs of lost productivity due to colorectal cancer in Ireland and examined how rising pension ages affect these costs. Data from a postal survey of colorectal cancer survivors (6 to 30 months after diagnosis; n = 159), taken from March 2010 to January 2011, were combined with population-level survival estimates and national wage data to calculate temporary and permanent disability, and premature mortality, costs using the human capital approach. Almost 40% of respondents left the workforce permanently after diagnosis and 90% took temporary time off work. Total costs of lost productivity per person were 205,847 in 2008 assuming retirement at the age of 65. When the retirement age was raised to 70, productivity costs increased by almost a half. Our study demonstrated the considerable productivity costs associated with colorectal cancer and highlighted the effect of rising retirement ages on costs.

  5. Loss of Work Productivity and Quality of Life in Patients With Autoimmune Bullous Dermatoses.

    Science.gov (United States)

    Heelan, K; Hitzig, S L; Knowles, S; Drucker, A M; Mittmann, N; Walsh, S; Shear, N H

    2015-01-01

    Little is known about quality of life and work productivity in autoimmune bullous dermatoses (AIBDs). To determine the impact of AIBDs on quality of life and work productivity. An observational cross-sectional study took place between February and May 2013 at an AIBD tertiary referral centre. Ninety-four patients were included. All participants completed the Dermatology Life Quality Index and the Work Productivity and Activity Impairment-Specific Health Problem questionnaires. Responders to treatment had less impairment (Pwork missed. Those with a higher Dermatology Life Quality Index score had greater work impairment and overall activity impairment (P=.041, P=.024). Nonresponders had increased impairment while working (Pwork impairment (PWork Productivity and Activity Impairment Questionnaire domains. AIBD has the potential to be a large burden on ability to work and quality of life. Larger studies are needed to clarify how these domains change over time and whether or not they improve with treatment. © The Author(s) 2015.

  6. Screen-Time Weight-loss Intervention Targeting Children at Home (SWITCH): a randomized controlled trial.

    Science.gov (United States)

    Maddison, Ralph; Marsh, Samantha; Foley, Louise; Epstein, Leonard H; Olds, Timothy; Dewes, Ofa; Heke, Ihirangi; Carter, Karen; Jiang, Yannan; Mhurchu, Cliona Ni

    2014-09-10

    Screen-based activities, such as watching television (TV), playing video games, and using computers, are common sedentary behaviors among young people and have been linked with increased energy intake and overweight. Previous home-based sedentary behaviour interventions have been limited by focusing primarily on the child, small sample sizes, and short follow-up periods. The SWITCH (Screen-Time Weight-loss Intervention Targeting Children at Home) study aimed to determine the effect of a home-based, family-delivered intervention to reduce screen-based sedentary behaviour on body composition, sedentary behaviour, physical activity, and diet over 24 weeks in overweight and obese children. A two-arm, parallel, randomized controlled trial was conducted. Children and their primary caregiver living in Auckland, New Zealand were recruited via schools, community centres, and word of mouth. The intervention, delivered over 20 weeks, consisted of a face-to-face meeting with the parent/caregiver and the child to deliver intervention content, which focused on training and educating them to use a wide range of strategies designed to reduce their child's screen time. Families were given Time Machine TV monitoring devices to assist with allocating screen time, activity packages to promote alternative activities, online support via a website, and monthly newsletters. Control participants were given the intervention material on completion of follow-up. The primary outcome was change in children's BMI z-score from baseline to 24 weeks. Children (n = 251) aged 9-12 years and their primary caregiver were randomized to receive the SWITCH intervention (n = 127) or no intervention (controls; n = 124). There was no significant difference in change of zBMI between the intervention and control groups, although a favorable trend was observed (-0.016; 95% CI: -0.084, 0.051; p = 0.64). There were also no significant differences on secondary outcomes, except for a trend towards

  7. Applying economic incentives to increase effectiveness of an outpatient weight loss program (TRIO) - A randomized controlled trial.

    Science.gov (United States)

    Finkelstein, Eric A; Tham, Kwang-Wei; Haaland, Benjamin A; Sahasranaman, Aarti

    2017-07-01

    The prevalence of overweight and obesity has more than doubled in the past three decades, leading to rising rates of non-communicable diseases. This study tests whether adding a payment/rewards (term reward) program to an existing evidence-based weight loss program can increase weight loss and weight loss maintenance. We conducted a parallel-group randomized controlled trial from October 2012 to October 2015 with 161 overweight or obese individuals randomized to either control or reward arm in a 1:2 ratio. Control and reward arm participants received a four month weight loss program at the LIFE (Lifestyle Improvement and Fitness Enhancement) Centre at Singapore General Hospital. Those in the reward arm paid a fee of S$165.00 (1US$ = 1.35S$) to access a program that provided rewards of up to S$660 for meeting weight loss and physical activity goals. Participants could choose to receive rewards as guaranteed cash payments or a lottery ticket with a 1 in 10 chance of winning but with the same expected value. The primary outcome was weight loss at months 4, 8, and 12. 161 participants were randomized to control (n = 54) or reward (n = 107) arms. Average weight loss was more than twice as great in the reward arm compared to the control arm at month 4 when the program concluded (3.4 kg vs 1.4 kg, p rewards concluded (3.3 kg vs 1.8 kg, p rewards program can be used to improve weight loss and weight loss maintenance when combined with an evidence-based weight loss program. Future efforts should attempt to replicate this approach and identify how to cost effectively expand these programs to maximize their reach. This study is registered at www.clinicaltrials.gov (Identifier: NCT01533454). Copyright © 2017 Elsevier Ltd. All rights reserved.

  8. Bright Light for Weight Loss: Results of a Controlled Crossover Trial

    Directory of Open Access Journals (Sweden)

    Konstantin V. Danilenko

    2013-02-01

    Full Text Available Objective: To investigate whether bright light treatment can reduce body mass in overweight subjects irrespective of their seasonal (= light dependence. Methods: A crossover, placebo-controlled, randomized clinical trial was performed between November and April in Novosibirsk, Russia (55° N. The trial comprised a 3-week in-home session of morning bright light treatment using a device of light-emitting diodes and a 3-week placebo session by means of a deactivated ion generator, separated by an off-protocol period of at least 23 days. The number of placebo and light sessions was matched with respect to season. Data were obtained from 34 overweight women, aged 20-54 years, 10 were seasonal-dependent according to the Seasonal Pattern Assessment Questionnaire. Weekly measures included body weight, percentage body fat by bioimpedancemetry, and subjective scores (appetite, mood, energy levels. Results: Motivation and expectation towards weight loss were similar for the two intervention sessions. With light, compared to the placebo session, weight did not reduce significantly, but percentage fat, fat mass, and appetite were significantly lower (average fat reduction 0.35 kg. The latter two results remained significant after excluding seasonal-dependent subjects from the analysis. Irrespective of the type of intervention, seasonal-dependent subjects had greater weight and fat mass changes during treatment (decline p 0.036 or between sessions (regain p 0.003. Photoperiod (p = 0.0041, air temperature to a lesser extent (p = 0.012, but not sunshine (p = 0.29 was associated with the weight change (greater weight reduction if the second session was in spring. Conclusion: Morning bright light treatment reduces body fat and appetite in overweight women and may be included in weight control programs.

  9. Set-shifting abilities, mood and loss of control over eating in binge eating disorder: An experimental study.

    Science.gov (United States)

    Dingemans, Alexandra E; Visser, Hiske; Paul, Linda; van Furth, Eric F

    2015-12-15

    Executive functions play an important role in problem-solving and self-control. Set-shifting is an aspect of executive functioning and represents cognitive flexibility. The inability to control eating in Binge Eating Disorder (BED) may imply deficits in set-shifting which could be exacerbated by negative mood and depressive symptoms. The aim of the study was to test whether there is a causal relationship between set-shifting ability, changes in mood and loss of control over eating in BED. Seventy-five participants diagnosed with BED were randomly assigned to a negative or neutral mood induction. Set-shifting abilities, depressive symptoms, current mood and loss of control over eating were assessed. Having depressive symptoms and poorer set-shifting abilities resulted in a more negative mood after a negative mood induction, whereas this was not observed in the neutral mood induction. Post-hoc analyses revealed that individuals with poorer set-shifting abilities and more changes in negative mood, experienced more feelings of loss of control over eating than individuals whose set-shifting abilities were better and whose mood did not change. The results suggest that both depressive symptoms and deficits in set-shifting abilities may decrease an individual's ability to handle negative affect and increase loss of control over eating in individuals with BED. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

  10. Inhibitory Control and Hedonic Response towards Food Interactively Predict Success in a Weight Loss Programme for Adults with Obesity

    Directory of Open Access Journals (Sweden)

    Timo Brockmeyer

    2016-10-01

    Full Text Available Objective: Low inhibitory control and strong hedonic response towards food are considered to contribute to overeating and obesity. Based on previous research, the present study aimed at examining the potentially crucial interplay between these two factors in terms of long-term weight loss in people with obesity. Methods: BMI, inhibitory control towards food, and food liking were assessed in obese adults prior to a weight reduction programme (OPTIFAST® 52. After the weight reduction phase (week 13 and the weight loss maintenance phase (week 52, participants' BMI was re-assessed. Results: Baseline BMI, inhibitory control and food liking alone did not predict weight loss. As hypothesised, however, inhibitory control and food liking interactively predicted weight loss from baseline to week 13 and to week 52 (albeit the latter effect was less robust. Participants with low inhibitory control and marked food liking were less successful in weight reduction. Conclusion: These findings underscore the relevance of the interplay between cognitive control and food reward valuation in the maintenance of obesity.

  11. Productivity loss of caregivers of schizophrenia patients: a cross-sectional survey in Japan.

    Science.gov (United States)

    Sruamsiri, Rosarin; Mori, Yasuhiro; Mahlich, Jörg

    2018-04-27

    When a family member is diagnosed with schizophrenia, it causes stress to the caregiver that can eventually result in missed work days and lower work performance. This study aims at revealing productivity costs for caregivers of schizophrenia patients in Japan. A cross-sectional survey of caregivers was conducted and resulted in 171 respondents. The assessment of work productivity included calculating the costs of absenteeism, presenteeism and total productivity costs. This was accomplished using the "Work Productivity and Activity Impairment Questionnaire" (WPAI). A relative majority of caregivers in the sample provided care for their spouse (47%), 18% cared for their brother or sister and 16% provided care for their child. Per capita productivity costs totaled JPY 2.42 million, with JPY 2.36 million (97%) of that amount being due to presenteeism. The burden on caregivers is substantial enough to warrant structured support programs aimed at maintaining careers' physical and mental health, helping them provide more effective care to schizophrenia patients and eventually increase productivity at work.

  12. Hearing Loss is Associated With Risk of Alzheimer’s Disease: A Case-Control Study in Older People

    OpenAIRE

    Shih-Chang Hung; Kuan-Fu Liao; Chih-Hsin Muo; Shih-Wei Lai; Chia-Wei Chang; Hung-Chang Hung

    2015-01-01

    Background: It remains unknown whether hearing loss increases the risk of Alzheimer’s disease. This study aimed to examine the association between hearing loss and risk of Alzheimer’s disease in older people in Taiwan. Methods: Analyzing the database from Taiwan’s National Health Insurance Program, this case-control study enrolled 488 subjects ≥65 years old with newly diagnosed Alzheimer’s disease as a case group and 1952 subjects without Alzheimer’s disease as a control group from 1998–20...

  13. Efficient direct yaw moment control: tyre slip power loss minimisation for four-independent wheel drive vehicle

    Science.gov (United States)

    Kobayashi, Takao; Katsuyama, Etsuo; Sugiura, Hideki; Ono, Eiichi; Yamamoto, Masaki

    2018-05-01

    This paper proposes an efficient direct yaw moment control (DYC) capable of minimising tyre slip power loss on contact patches for a four-independent wheel drive vehicle. Simulations identified a significant power loss reduction with a direct yaw moment due to a change in steer characteristics during acceleration or deceleration while turning. Simultaneously, the vehicle motion can be stabilised. As a result, the proposed control method can ensure compatibility between vehicle dynamics performance and energy efficiency. This paper also describes the results of a full-vehicle simulation that was conducted to examine the effectiveness of the proposed DYC.

  14. Can Differentiated Production Planning and Control enable both Responsiveness and Efficiency in Food Production?

    Directory of Open Access Journals (Sweden)

    Anita Romsdal

    2014-07-01

    Full Text Available This paper addresses the complex production planning and control (PPC challenges in food supply chains. The study illustrates how food producers' traditional make‐to‐stock (MTS approach is not well suited to meet the trends of increasing product variety, higher demand uncertainty, increasing sales of fresh food products and more demanding customers. The paper proposes a framework for differentiated PPC that combines MTS with make‐to‐order (MTO.The framework matches products with the most appropriate PPC approaches and buffering techniques depending on market and product characteristics. The core idea is to achieve more volume flexibility in the production system by exploiting favourable product and market characteristics (high demand predictability, long customer order leadtime allowances and low product perishability. A case study is used to demonstrate how the framework can enable food producers to achieve efficiency in production, inventory and PPC processes – and simultaneously be responsive to market requirements.

  15. The impact of fuel temperature reactivity coefficient on loss of reactivity control accident

    International Nuclear Information System (INIS)

    Park, J. H.; Ryu, E. H.; Song, Y. M.; Jung, J. Y.

    2012-01-01

    from AECL (Atomic Energy Canada Limited) to KHNP (Korea Hydro and Nuclear Power) for a full scope safety analysis of the refurbished Wolsong unit 1. Even though the recent physics code systems are well developed, uncertainties of the calculated physics or safety parameters still exist. To see how much PCR uncertainty exists in the calculation, the PCR at the full power condition has been indirectly measured in the Wolsong units and its measurement and analysis uncertainties were evaluated. It was shown that the maximum values of the PCR during normal operation were estimated to be about four times the calculated PCR of the refurbished Wolsong unit 1. This study presents a sensitivity assessment of LORC (Loss of Reactivity Control) accident events to investigate the impact of a higher PCR (based on the measured positive maximum value) than the reference value (based on the calculated value) on a safety analysis

  16. Tranexamic acid reduces blood loss during and after cesarean section: A double blinded, randomized, controlled trial

    Directory of Open Access Journals (Sweden)

    Amr H. Yehia

    2014-03-01

    Conclusions: Tranexamic acid can be used safely to reduce blood loss during cesarean section. Reduced blood loss after tranexamic acid was associated with improvement of post-operative hemoglobin, hematocrit and with reduction of post-partum need for iron replacement.

  17. Low-Voltage Consumption Coordination for Loss Minimization and Voltage Control

    DEFF Research Database (Denmark)

    Juelsgaard, Morten; Sloth, Christoffer; Wisniewski, Rafal

    2014-01-01

    This work presents a strategy for minimizing active power losses in low-voltage grids, by coordinating the consumption of electric vehicles and power generation from solar panels. We show that minimizing losses, also reduces voltage variations, and illustrate how this may be employed for increasing...

  18. Modeling and control for closed environment plant production systems

    Science.gov (United States)

    Fleisher, David H.; Ting, K. C.; Janes, H. W. (Principal Investigator)

    2002-01-01

    A computer program was developed to study multiple crop production and control in controlled environment plant production systems. The program simulates crop growth and development under nominal and off-nominal environments. Time-series crop models for wheat (Triticum aestivum), soybean (Glycine max), and white potato (Solanum tuberosum) are integrated with a model-based predictive controller. The controller evaluates and compensates for effects of environmental disturbances on crop production scheduling. The crop models consist of a set of nonlinear polynomial equations, six for each crop, developed using multivariate polynomial regression (MPR). Simulated data from DSSAT crop models, previously modified for crop production in controlled environments with hydroponics under elevated atmospheric carbon dioxide concentration, were used for the MPR fitting. The model-based predictive controller adjusts light intensity, air temperature, and carbon dioxide concentration set points in response to environmental perturbations. Control signals are determined from minimization of a cost function, which is based on the weighted control effort and squared-error between the system response and desired reference signal.

  19. FPGA based Control of a Production Cell System

    NARCIS (Netherlands)

    Groothuis, M.A.; van Zuijlen, Jasper J.P.; Broenink, Johannes F.

    Most motion control systems for mechatronic systems are implemented on digital computers. In this paper we present an FPGA based solution implemented on a low cost Xilinx Spartan III FPGA. A Production Cell setup with multiple parallel operating units is chosen as a test case. The embedded control

  20. 21 CFR 226.40 - Production and control procedures.

    Science.gov (United States)

    2010-04-01

    ...) DRUGS: GENERAL CURRENT GOOD MANUFACTURING PRACTICE FOR TYPE A MEDICATED ARTICLES Product Quality Control... event of any significant discrepancies, key personnel shall prevent distribution of the batch in... control procedures shall include provision for discontinuing distribution of any Type A medicated article...

  1. Memory loss

    Science.gov (United States)

    ... barbiturates or ( hypnotics ) ECT (electroconvulsive therapy) (most often short-term memory loss) Epilepsy that is not well controlled Illness that ... appointment. Medical history questions may include: Type of memory loss, such as short-term or long-term Time pattern, such as how ...

  2. [Pharmaceutical product quality control and good manufacturing practices].

    Science.gov (United States)

    Hiyama, Yukio

    2010-01-01

    This report describes the roles of Good Manufacturing Practices (GMP) in pharmaceutical product quality control. There are three keys to pharmaceutical product quality control. They are specifications, thorough product characterization during development, and adherence to GMP as the ICH Q6A guideline on specifications provides the most important principles in its background section. Impacts of the revised Pharmaceutical Affairs Law (rPAL) which became effective in 2005 on product quality control are discussed. Progress of ICH discussion for Pharmaceutical Development (Q8), Quality Risk Management (Q9) and Pharmaceutical Quality System (Q10) are reviewed. In order to reconstruct GMP guidelines and GMP inspection system in the regulatory agencies under the new paradigm by rPAL and the ICH, a series of Health Science studies were conducted. For GMP guidelines, product GMP guideline, technology transfer guideline, laboratory control guideline and change control system guideline were written. For the GMP inspection system, inspection check list, inspection memo and inspection scenario were proposed also by the Health Science study groups. Because pharmaceutical products and their raw materials are manufactured and distributed internationally, collaborations with other national authorities are highly desired. In order to enhance the international collaborations, consistent establishment of GMP inspection quality system throughout Japan will be essential.

  3. Weight change in control group participants in behavioural weight loss interventions: a systematic review and meta-regression study

    Directory of Open Access Journals (Sweden)

    Waters Lauren

    2012-08-01

    Full Text Available Abstract Background Unanticipated control group improvements have been observed in intervention trials targeting various health behaviours. This phenomenon has not been studied in the context of behavioural weight loss intervention trials. The purpose of this study is to conduct a systematic review and meta-regression of behavioural weight loss interventions to quantify control group weight change, and relate the size of this effect to specific trial and sample characteristics. Methods Database searches identified reports of intervention trials meeting the inclusion criteria. Data on control group weight change and possible explanatory factors were abstracted and analysed descriptively and quantitatively. Results 85 trials were reviewed and 72 were included in the meta-regression. While there was no change in control group weight, control groups receiving usual care lost 1 kg more than control groups that received no intervention, beyond measurement. Conclusions There are several possible explanations why control group changes occur in intervention trials targeting other behaviours, but not for weight loss. Control group participation may prevent weight gain, although more research is needed to confirm this hypothesis.

  4. Heat production, respiratory quotient, and methane loss subsequent to LPS challenge in beef heifers

    Science.gov (United States)

    Respiration calorimetry was used to measure energy utilization during an acute phase response (APR) to lipopolysaccharide (LPS). Eight Angus heifers (208 +/- 29.2 kg) were randomly assigned to one of two calorimeters in four 2-day periods for measurement of heat production (HP), methane (CH4), and r...

  5. Energy Loss in Hadron Production in pp and Heavy Ion Collisions

    Czech Academy of Sciences Publication Activity Database

    Tokarev, M. V.; Zborovský, Imrich

    2012-01-01

    Roč. 219, č. 116 (2012), s. 301-304 ISSN 0920-5632. [5th Joint International Hadron Structure Conference. Tatranska Strba, 27.6.2011 - 1.7.2011] R&D Projects: GA MŠk LA08002 Institutional research plan: CEZ:AV0Z10480505 Keywords : TRANSVERSE-MOMENTUM * KAON PRODUCTION * SPECTRA Subject RIV: BE - Theoretical Physics

  6. Nitrogen consumption, utilisation and losses in pig production in France, The Netherlands, and Denmark

    NARCIS (Netherlands)

    Dourmad, J.Y.; SOve, B.; Latimer, P.; Boisen, S.; Fernández, J.; Peet-Schwering, van der C.; Jongbloed, A.W.

    1999-01-01

    In highly intensive pig production areas, manure disposal is a major problem especially for nitrogen, because of water pollution by nitrates and air pollution by gaseous ammonia emissions. The situations in three European countries (Denmark, The Netherlands and France) were compared, on average, it

  7. Determining yield loss caused by brown rust in production fields of sugarcane

    Science.gov (United States)

    Infections of Puccinia melanocephala, the causal agent of brown rust, appear on Louisiana sugarcane in the spring. Disease expression is usually limited to 2 to 3 months until temperatures exceed those favorable for spore production. The affected sugarcane is harvested 4 to 6 months after rust sympt...

  8. Diversity effects on root length production and loss in an experimental grassland community

    NARCIS (Netherlands)

    Mommer, L.; Padilla, F.M.; Ruijven, van J.; Caluwe, de H.; Smit-Tiekstra, A.E.; Berendse, F.; Kroon, de H.

    2015-01-01

    Advances in root ecology have revealed that root standing biomass is higher in species-rich plant communities than in species-poor communities. Currently, we do not know whether this below-ground diversity effect is the result of enhanced root production or reduced root mortality or both, which is

  9. Preliminary Analysis of Aircraft Loss of Control Accidents: Worst Case Precursor Combinations and Temporal Sequencing

    Science.gov (United States)

    Belcastro, Christine M.; Groff, Loren; Newman, Richard L.; Foster, John V.; Crider, Dennis H.; Klyde, David H.; Huston, A. McCall

    2014-01-01

    Aircraft loss of control (LOC) is a leading cause of fatal accidents across all transport airplane and operational classes, and can result from a wide spectrum of hazards, often occurring in combination. Technologies developed for LOC prevention and recovery must therefore be effective under a wide variety of conditions and uncertainties, including multiple hazards, and their validation must provide a means of assessing system effectiveness and coverage of these hazards. This requires the definition of a comprehensive set of LOC test scenarios based on accident and incident data as well as future risks. This paper defines a comprehensive set of accidents and incidents over a recent 15 year period, and presents preliminary analysis results to identify worst-case combinations of causal and contributing factors (i.e., accident precursors) and how they sequence in time. Such analyses can provide insight in developing effective solutions for LOC, and form the basis for developing test scenarios that can be used in evaluating them. Preliminary findings based on the results of this paper indicate that system failures or malfunctions, crew actions or inactions, vehicle impairment conditions, and vehicle upsets contributed the most to accidents and fatalities, followed by inclement weather or atmospheric disturbances and poor visibility. Follow-on research will include finalizing the analysis through a team consensus process, defining future risks, and developing a comprehensive set of test scenarios with correlation to the accidents, incidents, and future risks. Since enhanced engineering simulations are required for batch and piloted evaluations under realistic LOC precursor conditions, these test scenarios can also serve as a high-level requirement for defining the engineering simulation enhancements needed for generating them.

  10. Puberty and the manifestations of loss of control eating in children and adolescents.

    Science.gov (United States)

    Vannucci, Anna; Tanofsky-Kraff, Marian; Ranzenhofer, Lisa M; Kelly, Nichole R; Hannallah, Louise M; Pickworth, C Katie; Grygorenko, Mariya V; Brady, Sheila M; Condarco, Tania A; Kozlosky, Merel; Demidowich, Andrew P; Yanovski, Susan Z; Shomaker, Lauren B; Yanovski, Jack A

    2014-11-01

    We investigated the manifestations of pediatric loss of control (LOC) eating at different stages of pubertal development. Participants were a nonclinical sample of 468 youth (8-17 years). Physical examination determined pubertal stage. LOC eating and disordered eating attitudes were assessed with the Eating Disorder Examination. In a randomized crossover design, a subset (n = 244) ate ad libitum from two test meals designed to capture normal and LOC eating. There were no differences in the prevalence rates or frequency of reported LOC eating episodes across pubertal stages (ps ≥ 0.50). There were, however, puberty by LOC eating interactions in disordered eating attitudes and palatable food consumption (ps ≤ .05), even after adjusting for age and body composition. LOC eating was associated with elevated global disordered eating attitudes, weight concern, and shape concern in post-pubertal youth (ps ≤ .001), but not pre-pubertal youth (ps ≥ .49). In late-puberty, youth with LOC eating consumed less energy from protein (p puberty was not associated with differences in eating behavior (ps ≥ 0.20). Findings suggest that puberty may be a critical risk period, when LOC eating behaviors in boys and girls may become accompanied by greater weight and shape concerns and more obesogenic food consumption patterns. Interventions for LOC eating during pre-puberty should be evaluated to determine if they are particularly beneficial for the prevention of exacerbated eating disorder psychopathology and adverse weight outcomes. © 2014 Wiley Periodicals, Inc.

  11. Interpersonal Problem Areas and Alexithymia in Adolescent Girls with Loss of Control Eating

    Science.gov (United States)

    Berger, Sarah Shafer; Elliott, Camden; Ranzenhofer, Lisa M.; Shomaker, Lauren B.; Hannallah, Louise; Field, Sara E.; Young, Jami F.; Sbrocco, Tracy; Wilfley, Denise E.; Yanovski, Jack A.; Tanofsky-Kraff, Marian

    2014-01-01

    This study investigated the links among interpersonal problem areas, depression, and alexithymia in adolescent girls at high-risk for excessive weight gain and binge eating disorder. Participants were 56 girls (Mage = 14.30, SD = 1.56; 53% non-Hispanic White) with a body mass index (BMI, kg/m2) between the 75th and 97th percentiles (MBMI-z = 1.57, SD = 0.32). By design, all participants reported loss of control eating patterns in the past month. Adolescents were individually interviewed prior to participating in a group interpersonal psychotherapy obesity and eating disorder prevention program, termed IPT for the prevention of excessive weight gain (IPT-WG). Participants’ interpersonal problem areas were coded by trained raters. Participants also completed questionnaires assessing depression and alexithymia. Primary interpersonal problem areas were categorized as interpersonal deficits (as defined in the eating disorders (ED) literature) (n = 29), role disputes (n = 22), or role transitions (n = 5). Girls with interpersonal deficits-ED had greater depressive symptoms and alexithymia than girls with role disputes (ps ≤ 0.01). However, girls with role transitions did not differ from girls with interpersonal deficits-ED or role disputes. Interpersonal problem area had an indirect association with depression via alexithymia; interpersonal deficits-ED were related to greater alexithymia, which in turn, was related to greater depressive symptoms (p = 0.01). Among girls at-risk for excess weight gain and eating disorders, those with interpersonal deficits-ED appear to have greater distress as compared to girls with role disputes or role transitions. Future research is required to elucidate the impact of interpersonal problem areas on psychotherapy outcomes. PMID:24139852

  12. Control of stored product pests by ionizing radiation

    Energy Technology Data Exchange (ETDEWEB)

    Hallman, Guy J [United States Department of Agriculture, Agricultural Research Service, Weslaco, TX (United States)

    2013-01-15

    Food irradiation for prevention of food-borne illness and disinfestation of commodities of pests is increasing in a number of countries. The goal of this review is to analyze the literature and current use of irradiation to control stored product pests and suggest research to optimize its potential. Doses to prevent reproduction of stored product pests range from 0.05 kGy for Tenebrio molitor L. to 0.45 kGy for Sitotroga cereallela (Olivier). Small but increasing amounts of grains and pulses are being irradiated in the world today especially in Asia. At least 33 countries permit irradiation of some stored products with 14 countries permitting it for all stored products. Ways in which stored product irradiation research and application may influence other uses of irradiation technology are also discussed. Deactivation of weed seeds might be an area of stored product phytosanitation where irradiation would have an advantage over other measures. (author)

  13. Controlled delivery of tauroursodeoxycholic acid from biodegradable microspheres slows retinal degeneration and vision loss in P23H rats.

    Directory of Open Access Journals (Sweden)

    Laura Fernández-Sánchez

    Full Text Available Successful drug therapies for treating ocular diseases require effective concentrations of neuroprotective compounds maintained over time at the site of action. The purpose of this work was to assess the efficacy of intravitreal controlled delivery of tauroursodeoxycholic acid (TUDCA encapsulated in poly(D,L-lactic-co-glycolic acid (PLGA microspheres for the treatment of the retina in a rat model of retinitis pigmentosa. PLGA microspheres (MSs containing TUDCA were produced by the O/W emulsion-solvent evaporation technique. Particle size and morphology were assessed by light scattering and scanning electronic microscopy, respectively. Homozygous P23H line 3 rats received a treatment of intravitreal injections of TUDCA-PLGA MSs. Retinal function was assessed by electroretinography at P30, P60, P90 and P120. The density, structure and synaptic contacts of retinal neurons were analyzed using immunofluorescence and confocal microscopy at P90 and P120. TUDCA-loaded PLGA MSs were spherical, with a smooth surface. The production yield was 78%, the MSs mean particle size was 23 μm and the drug loading resulted 12.5 ± 0.8 μg TUDCA/mg MSs. MSs were able to deliver the loaded active compound in a gradual and progressive manner over the 28-day in vitro release study. Scotopic electroretinografic responses showed increased ERG a- and b-wave amplitudes in TUDCA-PLGA-MSs-treated eyes as compared to those injected with unloaded PLGA particles. TUDCA-PLGA-MSs-treated eyes showed more photoreceptor rows than controls. The synaptic contacts of photoreceptors with bipolar and horizontal cells were also preserved in P23H rats treated with TUDCA-PLGA MSs. This work indicates that the slow and continuous delivery of TUDCA from PLGA-MSs has potential neuroprotective effects that could constitute a suitable therapy to prevent neurodegeneration and visual loss in retinitis pigmentosa.

  14. Carbohydrate- vs fat-controlled diet effect on weight loss and coronary artery disease risk: a pilot feeding study.

    Science.gov (United States)

    Mueller, Charles; Masri, Basem; Hogg, Jeannette; Mastrogiacomo, Maddalena; Chiu, Ya-Lin

    2010-10-01

    This pilot study compared weight loss and serum indicators of coronary artery disease (CAD) risk between 2 weight loss (energy-deficit) diets, one controlled for carbohydrate as a percentage of total calories and the other controlled for fat as percentage of total calories. Participants were randomized to 1 of 2 diets and fed on an outpatient basis for 70 days, after which they followed their diets using their own resources for an additional 70 days. Energy deficit for the diets was determined by indirect calorimetry with a 500- to 750-calorie per day adjustment. Weight and CAD risk indicators and serum lipid and C-reactive protein levels were measured at baseline, day 70, and day 140. The study was completed by 16 of 20 participants who were able to comply with the feeding portion of the study as well as with follow-up appointments during the second (self-management) period of the study. Participants lost weight in both diet groups (24.4 lbs, carbohydrate controlled; 18.5 lbs, fat controlled), and serum CAD risk factors decreased in both groups. There were no significant differences in CAD risk factors between diet groups, although there was a trend toward lighter low-density lipoprotein (LDL) size in the carbohydrate-controlled group. During the self-management portion of the study, weight loss stalled or regained from loss during the previous feeding period. The results, although underpowered, are consistent with recent studies in which macronutrient ratio of total calories in diet did not affect degree of weight loss and in which carbohydrate-controlled diets produced a predominance of lighter LDLs.

  15. Deregulated electricity markets with thermal losses and production bounds: models and optimality conditions

    Czech Academy of Sciences Publication Activity Database

    Aussel, D.; Červinka, Michal; Marechal, M.

    2016-01-01

    Roč. 50, č. 1 (2016), s. 19-38 ISSN 0399-0559 R&D Projects: GA ČR GAP402/12/1309; GA ČR GA201/09/1957 Institutional support: RVO:67985556 Keywords : Deregulated electricity market * production bounds * mathematical program with complementarity constraints * M-stationarity * calmness Subject RIV: BA - General Mathematics Impact factor: 0.550, year: 2016

  16. The effects of subjective loss of control on risk-taking behavior: the mediating role of anger

    Science.gov (United States)

    Beisswingert, Birgit M.; Zhang, Keshun; Goetz, Thomas; Fang, Ping; Fischbacher, Urs

    2015-01-01

    Based on the Appraisal Tendency Framework on the antecedents and consequences of emotions two experimental studies examined the relationship between externally caused loss of control experiences and risk-taking behavior, as well as the assumed mediation of this relationship by the emotion anger. An experimental paradigm for inducing externally caused and consequently externally attributed loss of control which should lead to experiences of anger was developed and pretested in a Pilot Study. The relationship between loss of control experiences, anger, and risk-taking behavior was investigated using two separate student samples from Germany (N = 84, 54% female) and China (N = 125; 64% female). In line with our hypotheses, results showed that anger mediated the link between subjective loss of control experiences and increasing risk-taking behavior. Multiple group comparisons revealing similar patterns in both samples affirmed the results’ cross-cultural generalizability. These results implicate that anger makes people less risk averse in the process of economic decision making. PMID:26217244

  17. The Effects of Subjective Loss of Control on Risk-taking Behavior: The Mediating Role of Anger

    Directory of Open Access Journals (Sweden)

    Birgit M. Beisswingert

    2015-06-01

    Full Text Available Based on the Appraisal Tendency Framework on the antecedents and consequences of emotions two experimental studies examined the relationship between externally caused loss of control experiences and risk-taking behavior, as well as the assumed mediation of this relationship by the emotion anger. An experimental paradigm for inducing externally caused and consequently externally attributed loss of control which should lead to experiences of anger was developed and pretested in a Pilot Study. The relationship between loss of control experiences, anger and risk-taking behavior was investigated using two separate student samples from Germany (N = 84, 54% female and China (N = 125; 64% female. In line with our hypotheses, results showed that anger mediated the link between subjective loss of control experiences and increasing risk-taking behavior. Multiple group comparisons revealing similar patterns in both samples affirmed the results’ cross-cultural generalizability. These results implicate that anger makes people less risk averse in the process of economic decision making.

  18. Loss of lateral prefrontal cortex control in food-directed attention and goal-directed food choice in obesity

    NARCIS (Netherlands)

    Janssen, Lieneke K.; Duif, Iris; Loon, van Ilke; Wegman, Joost; Vries, de Jeanne H.M.; Cools, Roshan; Aarts, Esther

    2017-01-01

    Loss of lateral prefrontal cortex (lPFC)-mediated attentional control may explain the automatic tendency to eat in the face of food. Here, we investigate the neurocognitive mechanism underlying attentional bias to food words and its association with obesity using a food Stroop task. We tested 76

  19. An empirical evaluation of the translation to Brazilian Portuguese of the Loss of Control over Eating Scale (LOCES

    Directory of Open Access Journals (Sweden)

    Felipe Q. da Luz

    2016-02-01

    Full Text Available Abstract Background Loss of control over eating is a key feature of the most prevalent eating disorders. The Loss of Control over Eating Scale (LOCES enables a thorough assessment of loss of control over eating. Objective This study empirically evaluated the translation of the LOCES from English to Brazilian Portuguese. Methods The scale was translated to Brazilian Portuguese and back translated to English in order to check accuracy of the translation. Two hundred and ninety-three medicine and nursing students, 60 males and 233 females, 18-55 years old, with mean body mass index (BMI 23.2 kg/m2 (SD 4.1, recruited between August and December 2014, answered the Brazilian Portuguese LOCES. An exploratory factor analysis was performed. Results Exploratory factor analysis of the Brazilian Portuguese LOCES showed three distinct factors of the loss of control over eating (disgust/negative sensations, cognitive experiences/dissociation, and “positive” effects as well as moderate consistency with previous reports of exploratory factor analysis of the English version. Discussion This study showed satisfactory translation of the LOCES from English to Brazilian Portuguese, which is now ready for further validation.

  20. A packet loss compliant logic-based communication alogoritham for cooperative path following control

    Digital Repository Service at National Institute of Oceanography (India)

    Rego, F.; Aguiar, A.P.; Pascoal, A.M.

    logic takes into account the topology of the communication network, the fact that communications are discrete, and the cost of exchanging information. We also address explicitly communication losses and bounded delays. Conditions are derived under which...

  1. LOFT/LP-FP-1B, Loss of Fluid Test, Fission Product Release Experiment

    International Nuclear Information System (INIS)

    1989-01-01

    1 - Description of test facility: The LOFT Integral Test Facility is a scale model of a LPWR. The intent of the facility is to model the nuclear, thermal-hydraulic phenomena which would take place in a LPWR during a LOCA. The general philosophy in scaling coolant volumes and flow areas in LOFT was to use the ratio of the LOFT core [50 MW(t)] to a typical LPWR core [3000 MW(t)]. For some components, this factor is not applied; however, it is used as extensively as practical. In general, components used in LOFT are similar in design to those of a LPWR. Because of scaling and component design, the LOFT LOCA is expected to closely model a LPWR LOCA. 2 - Description of test: The seventh OECD LOFT experiment was conducted on 19 December 1984. It was the first of the two experiments to be performed in the LOFT facility with intentional release of fission products. Its objectives were to obtain data on fission product release from the fuel-cladding gap into vapor and reflood water and to collect data on transport of these fission products through and out of the reactor coolant system. The experiment was initiated by a reactor scram with one second delayed opening of the quick-opening blowdown valves. 3 - Experimental limitations or shortcomings: Short core and steam generator, excessive core bypass, other scaling compromises, and lack of adequate measurements in certain areas

  2. LOFT/LP-FP-2, Loss of Fluid Test, Fission Product Release from Fuel

    International Nuclear Information System (INIS)

    1989-01-01

    1 - Description of test facility: The LOFT Integral Test Facility is a scale model of a LPWR. The intent of the facility is to model the nuclear, thermal-hydraulic phenomena which would take place in a LPWR during a LOCA. The general philosophy in scaling coolant volumes and flow areas in LOFT was to use the ratio of the LOFT core [50 MW(t)] to a typical LPWR core [3000 MW(t)]. For some components, this factor is not applied; however, it is used as extensively as practical. In general, components used in LOFT are similar in design to those of a LPWR. Because of scaling and component design, the LOFT LOCA is expected to closely model a LPWR LOCA. 2 - Description of test: The eighth OECD LOFT experiment was conducted on 7 March 1985. It was the second of the two experiments to be performed in the LOFT facility with intentional release of fission products. Its principal objectives were to determine the fission product release from the fuel during a severe fuel damage scenario and the subsequent transport of these fission products in a predominantly vapor/aerosol environment. This was the largest severe fuel damage experiment ever conducted, and serves as an important benchmark between smaller scale tests and the TMI-2 accident. 3 - Experimental limitations or shortcomings: Short core and steam generator, excessive core bypass, other scaling compromises, and lack of adequate measurements in certain areas

  3. A proprietary alpha-amylase inhibitor from white bean (Phaseolus vulgaris): a review of clinical studies on weight loss and glycemic control.

    Science.gov (United States)

    Barrett, Marilyn L; Udani, Jay K

    2011-03-17

    Obesity, and resultant health hazards which include diabetes, cardiovascular disease and metabolic syndrome, are worldwide medical problems. Control of diet and exercise are cornerstones of the management of excess weight. Foods with a low glycemic index may reduce the risk of diabetes and heart disease as well as their complications. As an alternative to a low glycemic index diet, there is a growing body of research into products that slow the absorption of carbohydrates through the inhibition of enzymes responsible for their digestion. These products include alpha-amylase and glucosidase inhibitors. The common white bean (Phaseolus vulgaris) produces an alpha-amylase inhibitor, which has been characterized and tested in numerous clinical studies. A specific and proprietary product named Phase 2® Carb Controller (Pharmachem Laboratories, Kearny, NJ) has demonstrated the ability to cause weight loss with doses of 500 to 3000 mg per day, in either a single dose or in divided doses. Clinical studies also show that Phase 2 has the ability to reduce the post-prandial spike in blood glucose levels. Experiments conducted incorporating Phase 2 into food and beverage products have found that it can be integrated into various products without losing activity or altering the appearance, texture or taste of the food. There have been no serious side effects reported following consumption of Phase 2. Gastro-intestinal side effects are rare and diminish upon extended use of the product. In summary, Phase 2 has the potential to induce weight loss and reduce spikes in blood sugar caused by carbohydrates through its alpha-amylase inhibiting activity.

  4. A proprietary alpha-amylase inhibitor from white bean (Phaseolus vulgaris: A review of clinical studies on weight loss and glycemic control

    Directory of Open Access Journals (Sweden)

    Barrett Marilyn L

    2011-03-01

    Full Text Available Abstract Obesity, and resultant health hazards which include diabetes, cardiovascular disease and metabolic syndrome, are worldwide medical problems. Control of diet and exercise are cornerstones of the management of excess weight. Foods with a low glycemic index may reduce the risk of diabetes and heart disease as well as their complications. As an alternative to a low glycemic index diet, there is a growing body of research into products that slow the absorption of carbohydrates through the inhibition of enzymes responsible for their digestion. These products include alpha-amylase and glucosidase inhibitors. The common white bean (Phaseolus vulgaris produces an alpha-amylase inhibitor, which has been characterized and tested in numerous clinical studies. A specific and proprietary product named Phase 2® Carb Controller (Pharmachem Laboratories, Kearny, NJ has demonstrated the ability to cause weight loss with doses of 500 to 3000 mg per day, in either a single dose or in divided doses. Clinical studies also show that Phase 2 has the ability to reduce the post-prandial spike in blood glucose levels. Experiments conducted incorporating Phase 2 into food and beverage products have found that it can be integrated into various products without losing activity or altering the appearance, texture or taste of the food. There have been no serious side effects reported following consumption of Phase 2. Gastro-intestinal side effects are rare and diminish upon extended use of the product. In summary, Phase 2 has the potential to induce weight loss and reduce spikes in blood sugar caused by carbohydrates through its alpha-amylase inhibiting activity.

  5. Loss Performance Modeling for Hierarchical Heterogeneous Wireless Networks With Speed-Sensitive Call Admission Control

    DEFF Research Database (Denmark)

    Huang, Qian; Huang, Yue-Cai; Ko, King-Tim

    2011-01-01

    . This approach avoids unnecessary and frequent handoff between cells and reduces signaling overheads. An approximation model with guaranteed accuracy and low computational complexity is presented for the loss performance of multiservice traffic. The accuracy of numerical results is validated by comparing......A hierarchical overlay structure is an alternative solution that integrates existing and future heterogeneous wireless networks to provide subscribers with better mobile broadband services. Traffic loss performance in such integrated heterogeneous networks is necessary for an operator's network...

  6. The global historical and future economic loss and cost of earthquakes during the production of adaptive worldwide economic fragility functions

    Science.gov (United States)

    Daniell, James; Wenzel, Friedemann

    2014-05-01

    Over the past decade, the production of economic indices behind the CATDAT Damaging Earthquakes Database has allowed for the conversion of historical earthquake economic loss and cost events into today's terms using long-term spatio-temporal series of consumer price index (CPI), construction costs, wage indices, and GDP from 1900-2013. As part of the doctoral thesis of Daniell (2014), databases and GIS layers for a country and sub-country level have been produced for population, GDP per capita, net and gross capital stock (depreciated and non-depreciated) using studies, census information and the perpetual inventory method. In addition, a detailed study has been undertaken to collect and reproduce as many historical isoseismal maps, macroseismic intensity results and reproductions of earthquakes as possible out of the 7208 damaging events in the CATDAT database from 1900 onwards. a) The isoseismal database and population bounds from 3000+ collected damaging events were compared with the output parameters of GDP and net and gross capital stock per intensity bound and administrative unit, creating a spatial join for analysis. b) The historical costs were divided into shaking/direct ground motion effects, and secondary effects costs. The shaking costs were further divided into gross capital stock related and GDP related costs for each administrative unit, intensity bound couplet. c) Costs were then estimated based on the optimisation of the function in terms of costs vs. gross capital stock and costs vs. GDP via the regression of the function. Losses were estimated based on net capital stock, looking at the infrastructure age and value at the time of the event. This dataset was then used to develop an economic exposure for each historical earthquake in comparison with the loss recorded in the CATDAT Damaging Earthquakes Database. The production of economic fragility functions for each country was possible using a temporal regression based on the parameters of

  7. Internal cost control on the ecological quality of products

    Directory of Open Access Journals (Sweden)

    N.P. Syroid

    2018-04-01

    Full Text Available To improve the environmental quality of products due attention should be paid to control the processes related to environmental quality input of the product. The results of the study help to state the purpose and objectives of the control, also to define objects for internal control of operations cost of environmental quality. So, we believe that the main purpose of internal cost control on the ecological quality of products is the establishment of the correctness and legality of business operations, prevention of violations and abuses in the expenditure of natural, labour, material and financial resources to ensure the minimization of negative impact on the health of consumers and the environment. The basic objectives of internal control of expenditure are brought forward, but it should be noted that they can vary and depend on the size, structure, spheres and types of economic activity of the enterprise, the requirements of management personnel. In the process of identifying the objects of control of environmental quality it should be noted that this list is not exhaustive, but it is most relevant to highlight objects such as genetically modified organisms and waste production. Also the subjects of cost control to environmental quality, their functions and the information base for monitoring are determined. Proper organization of the process of internal cost control on the ecological quality of products would benefit from a clear documentation of transactions, timely and complete registration of accounting data in the registers, the true reflection of information in managerial financial reporting and ensure reduction of the negative impact on the health of consumers and the environment.

  8. Intranasal oxytocin enhances neural processing of monetary reward and loss in post-traumatic stress disorder and traumatized controls.

    Science.gov (United States)

    Nawijn, Laura; van Zuiden, Mirjam; Koch, Saskia B J; Frijling, Jessie L; Veltman, Dick J; Olff, Miranda

    2016-04-01

    Anhedonia is a significant clinical problem in post-traumatic stress disorder (PTSD). PTSD patients show reduced motivational approach behavior, which may underlie anhedonic symptoms. Oxytocin administration is known to increase reward sensitivity and approach behavior. We therefore investigated whether oxytocin administration affected neural responses during motivational processing in PTSD patients and trauma-exposed controls. 35 police officers with PTSD (21 males) and 37 trauma-exposed police officers without PTSD (19 males) were included in a within-subjects, randomized, placebo-controlled fMRI study. Neural responses during anticipation of monetary reward and loss were investigated with a monetary incentive delay task (MID) after placebo and oxytocin (40 IU) administration. Oxytocin increased neural responses during reward and loss anticipation in PTSD patients and controls in the striatum, dorsal anterior cingulate cortex and insula, key regions in the reward pathway. Although PTSD patients did not differ from controls in motivational processing under placebo, anhedonia severity in PTSD patients was negatively related to reward responsiveness in the ventral striatum. Furthermore, oxytocin effects on reward processing in the ventral striatum were positively associated with anhedonia. Oxytocin administration increased reward pathway sensitivity during reward and loss anticipation in PTSD patients and trauma-exposed controls. Thus, oxytocin administration may increase motivation for goal-directed approach behavior in PTSD patients and controls, providing evidence for a neurobiological pathway through which oxytocin could potentially increase motivation and reward sensitivity in PTSD patients. Copyright © 2016 Elsevier Ltd. All rights reserved.

  9. Application of controlled thermonuclear reactor fusion energy for food production

    International Nuclear Information System (INIS)

    Dang, V.D.; Steinberg, M.

    1975-06-01

    Food and energy shortages in many parts of the world in the past two years raise an immediate need for the evaluation of energy input in food production. The present paper investigates systematically (1) the energy requirement for food production, and (2) the provision of controlled thermonuclear fusion energy for major energy intensive sectors of food manufacturing. Among all the items of energy input to the ''food industry,'' fertilizers, water for irrigation, food processing industries, such as beet sugar refinery and dough making and single cell protein manufacturing, have been chosen for study in detail. A controlled thermonuclear power reactor was used to provide electrical and thermal energy for all these processes. Conceptual design of the application of controlled thermonuclear power, water and air for methanol and ammonia synthesis and single cell protein production is presented. Economic analysis shows that these processes can be competitive. (auth)

  10. Environmental control technology in petroleum drilling and production

    International Nuclear Information System (INIS)

    Wojtanowicz, A.K.

    1997-01-01

    Environmental control technology (ECT) is process integrated and relates mainly to pollution prevention and risk assessment. Mechanisms of environmental impact in petroleum drilling, well completion and production, include the generation of waste, induction of toxicity or the creation of pathways for pollutant migration. The identification and evaluation of these mechanisms constitute two parts of the scope of ECT. A third part is the development of new techniques to comply with environmental requirements without prejudicing productivity. The basic concepts of the ECT approach are presented in this chapter. The approach is then used to analyse oilfield drilling and production processes. Environmental control components developed in these technologies are described. These include: the control of the volume and toxicity of drilling fluids; source separation technology in produced water cleaning; subsurface injection of oilfield waste slurries; containment technology in the integrity of petroleum wells; subsurface reduction of produced water; oilfield pit closure technology. (37 figures; 26 tables; 227 references) (UK)

  11. Control in indoor radon decay products by air treatment devices

    International Nuclear Information System (INIS)

    Hinds, W.C.; Rudnick, S.N.; Maher, E.F.; First, M.W.

    1983-01-01

    An evaluation of the efficacy of household air cleaning devices as a means to control radon decay products in existing buildings is presented. Previous research on air cleaning methods for airborne radon decay products has been directed primarily to the control of radon decay products in mines and has only limited application to control in residences where dust concentration, air change rate, and humidity are lower than in mines. Results show that room size air cleaners can achieve substantial reductions in working levels in residences. Reductions observed at air infiltration rates of 0.52 air changes per hour ranged from 58 to 89%. Although the two air cleaners tested produced the greatest reductions, the low cost, simplicity, and other benefits of air circulating fans, particularly the ceiling fan, appear to make them most suitable for residences

  12. Review of Residential Comfort Control Products and Opportunities

    Energy Technology Data Exchange (ETDEWEB)

    Metzger, Cheryn E. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Goyal, Siddharth [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Baechler, Michael C. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2017-12-15

    This paper begins by discussing the interaction of each major component in advanced sensor and control applications related to HVAC equipment. The paper also looks at the applications of these components to commissioning, maintenance and operations of the HVAC equipment in residential buildings. A summary of state-of-the-art product features is also provided. These products are categorized through their primary application type (commissioning/maintenance or operation) and the features are categorized by component type (sensors, data storage, human-in-the-loop, communication, and controls). A common theme that emerges from this study is the importance of the ability for various product categories to be connected to each other. There are many manufacturers of sensors and many manufacturers of controls, but the power to automate any commissioning, maintenance or operation application, requires connectivity.

  13. The ash in forest fire affected soils control the soil losses. Part 1. The pioneer research

    Science.gov (United States)

    Cerdà, Artemi; Pereira, Paulo

    2013-04-01

    After forest fires, the ash and the remaining vegetation cover on the soil surface are the main protection against erosion agents. The control ash exert on runoff generation mechanism was researched during the 90's (Cerdà, 1998a; 1998b). This pioneer research demonstrated that after forest fires there is a short period of time that runoff and surface wash by water is controlled by the high infiltration rates achieved by the soil, which were high due to the effect of ash acting as a mulch. The research of Cerdà (1998a; 1998b) also contributed to demonstrate that runoff was enhanced four month later upon the wash of the ash by the runoff, but also due to the removal of ash due to dissolution and water infiltration. As a consequence of the ephemeral ash cover the runoff and erosion reached the peak after the removal of the ash (usually four month), and for two years the soil erosion reached the peak (Cerdà, 1998a). Research developed during the last decade shown that the ash and the litter cover together contribute to reduce the soil losses after the forest fire (Cerdà and Doerr, 2008). The fate of the ash is related to the climatic conditions of the post-fire season, as intense thunderstorms erode the ash layer and low intensity rainfall contribute to a higher infiltration rate and the recovery of the vegetation. Another, key factor found during the last two decades that determine the fate of the ash and the soil and water losses is the impact of the fauna (Cerdà and Doerr, 2010). During the last decade new techniques were developed to study the impact of ash in the soil system, such as the one to monitor the ash changes by means of high spatial resolution photography (Pérez Cabello et al., 2012), and laboratory approaches that show the impact of ash as a key factor in the soil hydrology throughout the control they exert on the soil water repellency (Bodí et al., 2012). Laboratory approaches also shown that the fire severity is a key factor on the ash chemical

  14. Underlying Factors for Practicality of the Production Control Systems

    DEFF Research Database (Denmark)

    Arica, Emrah; Strandhagen, Jan Ola; Hvolby, Hans-Henrik

    2012-01-01

    and communication technology, coordination and feedback, human factors and decision making, and measurement are the identified factors to be taken into account. Industrial interviews with three case companies, that are participating to the research program called The Norwegian Manufacturing Future (SFI NORMAN......This paper gives indications to important factors that must be considered for effectiveness of the production control systems under uncertainty. Five key factors have been identified by the literature study. Production schedule generation and execution approach under uncertainty, information...

  15. Exploring the Potential for Increased Production from the Wave Energy Converter Lifesaver by Reactive Control

    Directory of Open Access Journals (Sweden)

    Marta Molinas

    2013-07-01

    Full Text Available Fred Olsen is currently testing their latest wave energy converter (WEC, Lifesaver, outside of Falmouth Bay in England, preparing it for commercial operation at the Wavehub test site. Previous studies, mostly focusing on hydrodynamics and peak to average power reduction, have shown that this device has potential for increased power extraction using reactive control. This article extends those analyses, adding a detailed model of the all-electric power take-off (PTO system, consisting of a permanent magnet synchronous generator, inverter and DC-link. Time domain simulations are performed to evaluate the PTO capabilities of the modeled WEC. However, when tuned towards reactive control, the generator losses become large, giving a very low overall system efficiency. Optimal control with respect to electrical output power is found to occur with low added mass, and when compared to pure passive loading, a 1% increase in annual energy production is estimated. The main factor reducing the effect of reactive control is found to be the minimum load-force constraint of the device. These results suggest that the Lifesaver has limited potential for increased production by reactive control. This analysis is nevertheless valuable, as it demonstrates how a wave-to-wire model can be used for investigation of PTO potential, annual energy production estimations and evaluations of different control techniques for a given WEC device.

  16. [Modeling developmental aspects of sensorimotor control of speech production].

    Science.gov (United States)

    Kröger, B J; Birkholz, P; Neuschaefer-Rube, C

    2007-05-01

    Detailed knowledge of the neurophysiology of speech acquisition is important for understanding the developmental aspects of speech perception and production and for understanding developmental disorders of speech perception and production. A computer implemented neural model of sensorimotor control of speech production was developed. The model is capable of demonstrating the neural functions of different cortical areas during speech production in detail. (i) Two sensory and two motor maps or neural representations and the appertaining neural mappings or projections establish the sensorimotor feedback control system. These maps and mappings are already formed and trained during the prelinguistic phase of speech acquisition. (ii) The feedforward sensorimotor control system comprises the lexical map (representations of sounds, syllables, and words of the first language) and the mappings from lexical to sensory and to motor maps. The training of the appertaining mappings form the linguistic phase of speech acquisition. (iii) Three prelinguistic learning phases--i. e. silent mouthing, quasi stationary vocalic articulation, and realisation of articulatory protogestures--can be defined on the basis of our simulation studies using the computational neural model. These learning phases can be associated with temporal phases of prelinguistic speech acquisition obtained from natural data. The neural model illuminates the detailed function of specific cortical areas during speech production. In particular it can be shown that developmental disorders of speech production may result from a delayed or incorrect process within one of the prelinguistic learning phases defined by the neural model.

  17. Effects of Health Insurance Interruption on Loss of Hypertension Control in Women With and Women Without HIV.

    Science.gov (United States)

    Edmonds, Andrew; Ludema, Christina; Eron, Joseph J; Cole, Stephen R; Adedimeji, Adebola A; Cohen, Mardge H; Cooper, Hannah L; Fischl, Margaret; Johnson, Mallory O; Krause, Denise D; Merenstein, Dan; Milam, Joel; Wilson, Tracey E; Adimora, Adaora A

    2017-12-01

    Among low-income women with and without HIV, it is a priority to reduce age-related comorbidities, including hypertension and its sequelae. Because consistent health insurance access has been identified as an important factor in controlling many chronic diseases, we estimated the effects of coverage interruption on loss of hypertension control in a cohort of women in the United States. We analyzed prospective, longitudinal data from the Women's Interagency HIV Study. HIV-infected and HIV-uninfected women were included between 2005 and 2014 when they reported health insurance at consecutive biannual visits and had controlled hypertension, and were followed for any insurance break and loss of hypertension control. We estimated hazard ratios (HRs) by Cox proportional hazards regression with inverse-probability-of-treatment-and censoring weights (marginal structural models), and plotted the cumulative incidence of hypertension control loss. Among 890 HIV-infected women, the weighted HR for hypertension control loss comparing health insurance interruption to uninterrupted coverage was 1.37 (95% confidence interval [CI], 0.99-1.91). Inclusion of AIDS Drug Assistance Program (ADAP) participation with health insurance modestly increased the HR (1.47; 95% CI, 1.04-2.07). Analysis of 272 HIV-uninfected women yielded a similar HR (1.39; 95% CI, 0.88-2.21). Additionally, there were indications of uninterrupted coverage having a protective effect on hypertension when compared with the natural course in HIV-infected (HR, 0.82; 95% CI, 0.61-1.11) and HIV-uninfected (HR, 0.78; 95% CI, 0.52-1.19) women. This study provides evidence that health insurance continuity promotes hypertension control in key populations. Interventions that ensure coverage stability and ADAP access should be a policy priority.

  18. Isotope methods for the control of food products and beverages

    Energy Technology Data Exchange (ETDEWEB)

    Guillou, C; Reniero, F [Commission of the European Communities, Joint Research Centre, Ispra (Italy)

    2001-10-01

    The measurement of the stable isotope contents provides useful information for the detection of many frauds in food products. Nuclear magnetic resonance (NMR) and isotopic ratio mass spectroscopy (IRMS) are the two main analytical techniques used for the determination of stable isotope contents in food products. These analytical techniques have been considerably improved in the last years offering wider possibilities of applications for food analysis. A review of the applications for the control of food products and beverages is presented. The need for new reference materials is discussed. (author)

  19. Isotope methods for the control of food products and beverages

    International Nuclear Information System (INIS)

    Guillou, C.; Reniero, F.

    2001-01-01

    The measurement of the stable isotope contents provides useful information for the detection of many frauds in food products. Nuclear magnetic resonance (NMR) and isotopic ratio mass spectroscopy (IRMS) are the two main analytical techniques used for the determination of stable isotope contents in food products. These analytical techniques have been considerably improved in the last years offering wider possibilities of applications for food analysis. A review of the applications for the control of food products and beverages is presented. The need for new reference materials is discussed. (author)

  20. Chocolate cake. Guilt or celebration? Associations with healthy eating attitudes, perceived behavioural control, intentions and weight-loss.

    Science.gov (United States)

    Kuijer, Roeline G; Boyce, Jessica A

    2014-03-01

    Food and eating are often associated with ambivalent feelings: pleasure and enjoyment, but also worry and guilt. Guilt has the potential to motivate behaviour change, but may also lead to feelings of helplessness and loss of control. This study firstly examined whether a default association of either 'guilt' or 'celebration' with a prototypical forbidden food item (chocolate cake) was related to differences in attitudes, perceived behavioural control, and intentions in relation to healthy eating, and secondly whether the default association was related to weight change over an 18month period (and short term weight-loss in a subsample of participants with a weight-loss goal). This study did not find any evidence for adaptive or motivational properties of guilt. Participants associating chocolate cake with guilt did not report more positive attitudes or stronger intentions to eat healthy than did those associating chocolate cake with celebration. Instead, they reported lower levels of perceived behavioural control over eating and were less successful at maintaining their weight over an 18month period. Participants with a weight-loss goal who associated chocolate cake with guilt were less successful at losing weight over a 3month period compared to those associating chocolate cake with celebration. Copyright © 2014. Published by Elsevier Ltd.

  1. Strategies of Production Control as Tools of Efficient Management of Production Enterprises

    Science.gov (United States)

    Budynek, Mateusz; Celińska, Elżbieta; Dybikowska, Adrianna; Kozak, Monika; Ratajczak, Joanna; Urban, Jagoda; Materne, Karolina

    2016-03-01

    The paper discusses the problem of principle methods of production control as a strategy supporting the production system and stimulating efficient solutions in respect management in production enterprises. The article describes MRP, ERP, JIT, KANBAN and TOC methods and focuses on their main goals, principles of functioning as well as benefits resulting from their application. The methods represent two diverse strategies of production control, i.e. pull and push strategies. Push strategies are used when the plans apply to the first and principle part of production and are based on the demand forecasts. Pull strategies are used when all planning decisions apply to the final stage and depend on the actual demand or orders from customers.

  2. STRATEGIES OF PRODUCTION CONTROL AS TOOLS OF EFFICIENT MANAGEMENT OF PRODUCTION ENTERPRISES

    Directory of Open Access Journals (Sweden)

    Mateusz BUDYNEK

    2016-01-01

    Full Text Available The paper discusses the problem of principle methods of production control as a strategy supporting the production system and stimulating efficient solutions in respect management in production enterprises. The article describes MRP, ERP, JIT, KANBAN and TOC methods and focuses on their main goals, principles of functioning as well as benefits re-sulting from their application. The methods represent two diverse strategies of production control, i.e. pull and push strategies. Push strategies are used when the plans apply to the first and principle part of production and are based on the demand forecasts. Pull strategies are used when all planning decisions apply to the final stage and depend on the actual demand or orders from customers.

  3. Research on Single-Phase PWM Converter with Reverse Conducting IGBT Based on Loss Threshold Desaturation Control

    Directory of Open Access Journals (Sweden)

    Xianjin Huang

    2017-11-01

    Full Text Available In the application of vehicle power supply and distributed power generation, there are strict requirements for the pulse width modulation (PWM converter regarding power density and reliability. When compared with the conventional insulated gate bipolar transistor (IGBT module, the Reverse Conducting-Insulated Gate Bipolar Transistor (RC-IGBT with the same package has a lower thermal resistance and higher current tolerance. By applying the gate desaturation control, the reverse recovery loss of the RC-IGBT diode may be reduced. In this paper, a loss threshold desaturation control method is studied to improve the output characteristics of the single-phase PWM converter with a low switching frequency. The gate desaturation control characteristics of the RC-IGBT’s diode are studied. A proper current limit is set to avoid the ineffective infliction of the desaturation pulse, while the bridge arm current crosses zero. The expectation of optimized loss decrease is obtained, and the better performance for the RC-IGBTs of the single-phase PWM converter is achieved through the optimized desaturation pulse distribution. Finally, the improved predictive current control algorithm that is applied to the PWM converter with RC-IGBTs is simulated, and is operated and tested on the scaled reduced power platform. The results prove that the gate desaturation control with the improved predictive current algorithm may effectively improve the RC-IGBT’s characteristics, and realize the stable output of the PWM converter.

  4. Numerical aspects of optimal control of penicillin production

    Czech Academy of Sciences Publication Activity Database

    Pčolka, M.; Čelikovský, Sergej

    2014-01-01

    Roč. 37, č. 1 (2014), s. 71-81 ISSN 1615-7591 R&D Projects: GA ČR(CZ) GA13-20433S Institutional support: RVO:67985556 Keywords : Optimal control * Nonlinear systems * Fermentation process * Gradient method optimization * Antibiotics production Subject RIV: BC - Control Systems Theory Impact factor: 1.997, year: 2014 http://library.utia.cas.cz/separaty/2014/TR/celikovsky-0424718.pdf

  5. Control excess stock and calculating damaged products as the effort to increase revenue (case study of SME FBS)

    Science.gov (United States)

    Nurhasanah, N.; Mardhika, D. A.; Tanjung, W.; Gayatri, A. M.; Suri, Q. A.; Jingga; Safitri, R.; Supriyanto, A.

    2017-12-01

    Of small and medium scale (SME) is a business engaged in production. The growth product innovation of each year to year made competitiveness every SME very tight, and the sales must be high that avoid goods the product last year will be tough sold in the following year. Forecasting demand is needed so that no its production. In production process, besides products should also be considered about damaged products, resulting in a loss. In this study, researchers conducted a observations on SME FBS producing pants, shirts and shirts. SME FBS not having planning previous production, also in any period of production there always products be damaged. This study attempts to increase their SME FBS by controlling waste products, and those damaged products. According to the research conducted other products in some excess pants 1609 unit, and the shirts 187911 unit, and increase the income through control over the excess product obtained by 1% to the pants, and 52% to the shirts. For damaged product on period last year and future, increase 0.07% if the damaged on shirts can be sold, and 0.29% on pants if the broken sold.

  6. Co-culture of chondrons and mesenchymal stromal cells reduces the loss of collagen VI and improves extracellular matrix production.

    Science.gov (United States)

    Owida, H A; De Las Heras Ruiz, T; Dhillon, A; Yang, Y; Kuiper, N J

    2017-12-01

    Adult articular chondrocytes are surrounded by a pericellular matrix (PCM) to form a chondron. The PCM is rich in hyaluronan, proteoglycans, and collagen II, and it is the exclusive location of collagen VI in articular cartilage. Collagen VI anchors the chondrocyte to the PCM. It has been suggested that co-culture of chondrons with mesenchymal stromal cells (MSCs) might enhance extracellular matrix (ECM) production. This co-culture study investigates whether MSCs help to preserve the PCM and increase ECM production. Primary bovine chondrons or chondrocytes or rat MSCs were cultured alone to establish a baseline level for ECM production. A xenogeneic co-culture monolayer model using rat MSCs (20, 50, and 80%) was established. PCM maintenance and ECM production were assessed by biochemical assays, immunofluorescence, and histological staining. Co-culture of MSCs with chondrons enhanced ECM matrix production, as compared to chondrocyte or chondron only cultures. The ratio 50:50 co-culture of MSCs and chondrons resulted in the highest increase in GAG production (18.5 ± 0.54 pg/cell at day 1 and 11 ± 0.38 pg/cell at day 7 in 50:50 co-culture versus 16.8 ± 0.61 pg/cell at day 1 and 10 ± 0.45 pg/cell at day 7 in chondron monoculture). The co-culture of MSCs with chondrons appeared to decelerate the loss of the PCM as determined by collagen VI expression, whilst the expression of high-temperature requirement serine protease A1 (HtrA1) demonstrated an inverse relationship to that of the collagen VI. Together, this implies that MSCs directly or indirectly inhibited HtrA1 activity and the co-culture of MSCs with chondrons enhanced ECM synthesis and the preservation of the PCM.

  7. Behavioral self-regulation for weight loss in young adults: a randomized controlled trial

    Directory of Open Access Journals (Sweden)

    Wing Rena R

    2009-02-01

    Full Text Available Abstract Objective To determine the feasibility of recruiting and retaining young adults in a brief behavioral weight loss intervention tailored for this age group, and to assess the preliminary efficacy of an intervention that emphasizes daily self-weighing within the context of a self-regulation model. Methods Forty young adults (29.1 ± 3.9 years, range 21–35, average BMI of 33.36 ± 3.4 were randomized to one of two brief behavioral weight loss interventions: behavioral self-regulation (BSR or adapted standard behavioral treatment (SBT. Assessments were conducted at baseline, post-treatment (10 weeks, and follow-up (20 weeks. Intent to treat analyses were conducted using general linear modeling in SPSS version 14.0. Results Participants in both groups attended an average of 8.7 out of 10 group meetings, and retention rates were 93% and 88% for post-treatment and follow-up assessments, respectively. Both groups achieved significant weight losses at post-treatment (BSR = -6.4 kg (4.0; SBT = -6.2 kg (4.5 and follow-up (BSR = -6.6 kg (5.5; SBT = -5.8 kg (5.2, p p = .84. Across groups, there was a positive association between frequency of weighing at follow-up and overall weight change at follow-up (p = .01. Daily weighing was not associated with any adverse changes in psychological symptoms. Conclusion Young adults can be recruited and retained in a behavioral weight loss program tailored to their needs, and significant weight losses can be achieved and maintained through this brief intervention. Future research on the longer-term efficacy of a self-regulation approach using daily self-weighing for weight loss in this age group is warranted. Clinical Trials Registration # NCT00488228

  8. The relationship between weight loss and time and risk preference parameters: a randomized controlled trial.

    Science.gov (United States)

    Takada, Akemi; Nakamura, Ryota; Furukawa, Masakazu; Takahashi, Yoshimitsu; Nishimura, Shuzo; Kosugi, Shinji

    2011-07-01

    This study aimed to assess the effectiveness of intervention (specifically, intervention by telephone and mails, known as 'tele-care') relative to self-help as a weight-loss method. The question of whether there is a correlation between changes in two preference parameters--time discounting (i.e. impatience) and risk aversion--and the level of commitment was examined. The study, spanning a period of 24 weeks in 2006-2007, comprised 118 participants, each of whom was randomly assigned to either the tele-care or the self-help group. A public-health nurse provided support through telephone and mail communications to the tele-care group, aiming to reduce their calorie intake and increase exercise via this intervention. There was a significant decrease in the body weight of the participants of the tele-care group from the baseline; however, there were no significant differences in the weight loss, median time discounting or risk aversion between the two groups. The subsequent analysis for weight loss with changes in time and risk parameters revealed a significant difference in the weight loss in the time-discounting-loss and risk-aversion-gain groups. From the results of the multiple regression analysis, the time discounting was noted to be associated with age, initial BMI and marital status among men, and risk aversion was associated with age and job status among women. There is a possibility that a decrease in time discounting and increase in risk aversion might correlate with the weight loss or effectiveness of commitment in this trial. This study suggests that time discounting and risk aversion may be useful in anti-obesity efforts, since they are accurate criteria of behavioural patterns associated with weight problems. © Cambridge University Press, 2011

  9. Effective tree hazard control on forested recreation sites...losses and protection costs evaluated

    Science.gov (United States)

    Lee A. Paine

    1967-01-01

    Effectiveness of hazard control was evaluated by analyzing data on tree failures, accidents, and control costs on California recreation sites. Results indicate that reduction of limb hazard in oaks and bole hazard in conifers is the most effective form of control. Least effective is limb hazard reduction in conifers. After hazard control goals or control budgets have...

  10. Control of Listeria monocytogenes in food production plants

    Directory of Open Access Journals (Sweden)

    Dimitrijević Mirjana

    2008-01-01

    Full Text Available L. monocytogenes has been established in different plants for the production of food, including dairy plants, abattoirs, plants for the processing of fish, as well as those for the production of ready-to-eat (RTE food and this fact is being considered as the primary mechanism of food contamination with this bacteria. There is also the factor of numerous and diverse contaminated production equipment, because it has certain parts that are inaccessible for the necessary cleaning and disinfection. The temperature, position, as well as the material of the work surface are also linked to the contamination of plants with this bacteria. Investigations carried out so far have helped toward the better understanding of the manner and time of contamination of food items in the course of the production process, but there are still unresolved problems, including most certainly the biggest one - the adherence of bacteria and the creation of a biofilm, when the bacteria is in that condition more resistant to so-called stress factors which are usually used in the food industry for the purpose of decontamination of the surfaces with which foods come into contact. The control of L. monocytogenes in food production plants is possible primarily by using an integrated programme, compatible with the systems Hazard Analysis Critical Control Point (HACCP and Good Hygiene Practice (GHP, necessary in the production of food that is safe for the consumer. Essentially, the control measures that can contribute to reducing the incidence of findings of L.monocytogenes in the finished product, as well as the reducing of the level of contamination with this bacteria are linked, on the one hand, with hygiene procedures in the production process, and, on the other, with the applied technological procedures.

  11. Control of recoil losses in nanomechanical SiN membrane resonators

    Science.gov (United States)

    Borrielli, A.; Marconi, L.; Marin, F.; Marino, F.; Morana, B.; Pandraud, G.; Pontin, A.; Prodi, G. A.; Sarro, P. M.; Serra, E.; Bonaldi, M.

    2016-09-01

    In the context of a recoil damping analysis, we have designed and produced a membrane resonator equipped with a specific on-chip structure working as a "loss shield" for a circular membrane. In this device the vibrations of the membrane, with a quality factor of 107, reach the limit set by the intrinsic dissipation in silicon nitride, for all the modes and regardless of the modal shape, also at low frequency. Guided by our theoretical model of the loss shield, we describe the design rationale of the device, which can be used as effective replacement of commercial membrane resonators in advanced optomechanical setups, also at cryogenic temperatures.

  12. [Control of Soil Nutrient Loss of Typical Reforestation Patterns Along the Three Gorges Reservoir Area].

    Science.gov (United States)

    Wu, Dong; Huang, Zhi-lin; Xiao, Wen-fa; Zeng, Li-xiong

    2015-10-01

    Annual soil nutrient loss characteristics on typical reforestation patterns in watershed along the Three Gorges Reservoir Area were studied based on runoff plot experiment. Runoff and sediment nutrition content from May to October 2014 of typical reforestation patterns including garden plot (tea garden), forest land (Chinese chestnut) and the original slope farmland were determined and then analyzed. The results showed that: (1) After the Returning Farmland to Forest Project the quantity of annual soil nutrient (nitrogen and phosphorus, the sum of them in sediment and runoff) loss decreased. The output of total nitrogen (TN) was in the order of slope farmland (2 444.27 g x hm(-2)) > tea garden (998.70 g x hm(-2)) > Chinese chestnut forest (532.61 g x hm(-2)), and for total phosphorus (TP) loss was slope farmland (1 690.48 g x hm(-2)) > tea garden (488.06 g x hm(-2)) > Chinese chestnut forest (129.00 g x hm(-2)) . Compared with slope farmland, the load of TN and TP output of reforestation patterns decreased 68.68% and 81.75%, respectively. (2) Compared with slope farmland, available nitrogen loss decreased in reforestation patterns. Total nitrate nitrogen (NO3(-)-N) loss ranked in the order of slope farmland (113.79 g x hm(-2)) > tea garden (73.75 g x hm(-2)) > Chinese chestnut forest (56.06 g x hm(-2)) The largest amount of ammonium nitrogen (NH4(+)-N) was found in tea garden (69.34 g x hm(-2)), then in farmland (52.45 g x hm(-2)), and the least in Chinese chestnut forest (47.23 g x hm(-2)). (3) The main route of NO3(-)-N and NH4(+)-N loss was both through runoff, the quantity of NO3(-)-N and NH4(+)-N output in which accounted for 91.4% and 92.2% of the total, respectively. The quantity of TN and TP in sediment accounted for 86.6% and 98.4% of the total. TN and TP loss showed an extremely significant correlation with sediments, which showed that sediment output was the main approach of TN and TP loss.

  13. Development of control technology for HTTR hydrogen production system with mock-up test facility

    International Nuclear Information System (INIS)

    Ohashi, Hirofumi; Inaba, Yoshitomo; Nishihara, Tetsuo; Takeda, Tetsuaki; Hayashi, Koji; Takada, Shoji; Inagaki, Yoshiyuki

    2006-01-01

    The Japan Atomic Energy Agency has been planning the demonstration test of hydrogen production with the High Temperature Engineering Test Reactor (HTTR). In a HTTR hydrogen production system (HTTR-H2), it is required to control a primary helium temperature within an allowable value at a reactor inlet to prevent a reactor scram. A cooling system for a secondary helium with a steam generator (SG) and a radiator is installed at the downstream of a chemical rector in a secondary helium loop in order to mitigate the thermal disturbance caused by the hydrogen production system. Prior to HTTR-H2, the simulation test with a mock-up test facility has been carried out to establish the controllability on the helium temperature using the cooling system against the loss of chemical reaction. It was confirmed that the fluctuations of the helium temperature at chemical reactor outlet, more than 200 K, at the loss of chemical reaction could be successfully mitigated within the target of ±10 K at SG outlet. A dynamic simulation code of the cooling system for HTTR-H2 was verified with the obtained test data

  14. Anterior cruciate ligament tear induces a sustained loss of muscle fiber force production.

    Science.gov (United States)

    Gumucio, Jonathan P; Sugg, Kristoffer B; Enselman, Elizabeth R Sibilsky; Konja, Alexis C; Eckhardt, Logan R; Bedi, Asheesh; Mendias, Christopher L

    2018-01-18

    Patients with anterior cruciate ligament (ACL) tears have persistent quadriceps strength deficits that are thought to be due to altered neurophysiological function. Our goal was to determine the changes in muscle fiber contractility independent of the ability of motor neurons to activate fibers. We obtained quadriceps biopsies of patients undergoing ACL reconstruction, and additional biopsies 1, 2, and 6 months after surgery. Muscles fiber contractility was assessed in vitro, along with whole muscle strength testing. Compared with controls, patients had a 30% reduction in normalized muscle fiber force at the time of surgery. One month later, the force deficit was 41%, and at 6 months the deficit was 23%. Whole muscle strength testing demonstrated similar trends. While neurophysiological dysfunction contributes to whole muscle weakness, there is also a reduction in the force generating capacity of individual muscle cells independent of alpha motor neuron activation. Muscle Nerve, 2018. © 2018 Wiley Periodicals, Inc.

  15. Low-Dose Epinephrine Plus Tranexamic Acid Reduces Early Postoperative Blood Loss and Inflammatory Response: A Randomized Controlled Trial.

    Science.gov (United States)

    Zeng, Wei-Nan; Liu, Jun-Li; Wang, Fu-You; Chen, Cheng; Zhou, Qiang; Yang, Liu

    2018-02-21

    The reductions of perioperative blood loss and inflammatory response are important in total knee arthroplasty. Tranexamic acid reduced blood loss and the inflammatory response in several studies. However, the effect of epinephrine administration plus tranexamic acid has not been intensively investigated, to our knowledge. In this study, we evaluated whether the combined administration of low-dose epinephrine plus tranexamic acid reduced perioperative blood loss or inflammatory response further compared with tranexamic acid alone. This randomized placebo-controlled trial consisted of 179 consecutive patients who underwent primary total knee arthroplasty. Patients were randomized into 3 interventions: Group IV received intravenous low-dose epinephrine plus tranexamic acid, Group TP received topical diluted epinephrine plus tranexamic acid, and Group CT received tranexamic acid alone. The primary outcome was perioperative blood loss on postoperative day 1. Secondary outcomes included perioperative blood loss on postoperative day 3, coagulation and fibrinolysis parameters (measured by thromboelastography), inflammatory cytokine levels, transfusion values (rate and volume), thromboembolic complications, length of hospital stay, wound score, range of motion, and Hospital for Special Surgery (HSS) score. The mean calculated total blood loss (and standard deviation) in Group IV was 348.1 ± 158.2 mL on postoperative day 1 and 458.0 ± 183.4 mL on postoperative day 3, which were significantly reduced (p 0.05). The combined administration of low-dose epinephrine and tranexamic acid demonstrated an increased effect in reducing perioperative blood loss and the inflammatory response compared with tranexamic acid alone, with no apparent increased incidence of thromboembolic and other complications. Therapeutic Level I. See Instructions for Authors for a complete description of levels of evidence.

  16. Preliminary Screening of Potential Control Products against Drosophila suzukii

    Directory of Open Access Journals (Sweden)

    Andrew G. S. Cuthbertson

    2014-06-01

    Full Text Available The first recording of Drosophila suzukii in the UK occurred in the south of England during August 2012. Since then sticky traps have continued to record the presence of individuals. Several products (both chemical and biological were investigated for their efficacy against different life-stages of the pest. Both direct and indirect exposure to control products was assessed. Spinosad, chlorantraniliprole and the experimental product, TA2674, showed excellent potential as control agents when used as either a pre- or post-dipping treatment for blueberries with mortalities of 100%, 93% and 98% mortality, respectively, being achieved following pre-treatment. Direct spray application of all products tested had limited impact upon adult flies. Highest mortality (68% was achieved following direct application of TA2674. Entomopathogenic agents (nematodes and fungi tested appeared to reduce fly population development (ranges of 34–44% mortality obtained but would seem unable to eradicate outbreaks. The potential of the tested products to control D. suzukii is discussed.

  17. An inventory control model for biomass dependent production systems

    International Nuclear Information System (INIS)

    Grado, S.C.; Strauss, C.H.

    1993-01-01

    The financial performance of a biomass dependent production system was critiqued based on the development and validation of an inventory control model. Dynamic programming was used to examine the constraints and capabilities of producing ethanol from various biomass crops. In particular, the model evaluated the plantation, harvest, and manufacturing components of a woody biomass supply system. The optimum wood to ethanol production scheme produced 38 million litres of ethanol in the harvest year, at 13.6 million litre increase over the least optimal policy as demonstrated in the dynamic programming results. The system produced ethanol at a delivered cost of $0.38 L -1 which was consistent with the unit costs from other studies. Nearly 60% of the delivered costs were in ethanol production. The remaining costs were attributed to growing biomass (14%), harvest and shipment of the crop (18%), storage of the raw material and finished product (7%) and open-quotes lost salesclose quotes (2%). Inventory control, in all phases of production, proved to be an important cost consideration throughout the model. The model also analyzed the employment of alternative harvesting policies and the use of different or multiple feedstocks. A comparison between the least cost wood system and an even cut wood system further revealed the benefits of using an inventory control system

  18. Soil erosion and sediment production on watershed landscapes: Processes and control

    Science.gov (United States)

    Peter F. Ffolliott; Kenneth N. Brooks; Daniel G. Neary; Roberto Pizarro Tapia; Pablo Garcia-Chevesich

    2013-01-01

    Losses of the soil resources from otherwise productive and well functioning watersheds is often a recurring problem confronting hydrologists and watershed managers. These losses of soil have both on-site and off-site effects on the watershed impacted. In addition to the loss of inherent soil resources through erosion processes, on-site effects can include the breakdown...

  19. A continuous-time control model on production planning network ...

    African Journals Online (AJOL)

    A continuous-time control model on production planning network. DEA Omorogbe, MIU Okunsebor. Abstract. In this paper, we give a slightly detailed review of Graves and Hollywood model on constant inventory tactical planning model for a job shop. The limitations of this model are pointed out and a continuous time ...