Towards integrating control and information theories from information-theoretic measures to control performance limitations

CERN Document Server

Fang, Song; Ishii, Hideaki

2017-01-01

This book investigates the performance limitation issues in networked feedback systems. The fact that networked feedback systems consist of control and communication devices and systems calls for the integration of control theory and information theory. The primary contributions of this book lie in two aspects: the newly-proposed information-theoretic measures and the newly-discovered control performance limitations. We first propose a number of information notions to facilitate the analysis. Using those notions, classes of performance limitations of networked feedback systems, as well as state estimation systems, are then investigated. In general, the book presents a unique, cohesive treatment of performance limitation issues of networked feedback systems via an information-theoretic approach. This book is believed to be the first to treat the aforementioned subjects systematically and in a unified manner, offering a unique perspective differing from existing books.

Information, Technology, and Information Worker Productivity

OpenAIRE

Aral, Sinan; Brynjolfsson, Erik; Van Alstyne, Marshall

2009-01-01

We econometrically evaluate information worker productivity at a midsize executive recruiting firm and assess whether the knowledge that workers accessed through their electronic communication networks enabled them to multitask more productively. We estimate dynamic panel data models of multitasking, knowledge networks, and productivity using several types of micro-level data: (a) direct observation of more than 125,000 email messages over a period of 10 months; (b) detailed accounting data o...

Dynamic products shaping information to engage and persuade

CERN Document Server

Colombo, Sara

2016-01-01

This book explores how dynamic changes in products' sensory features can be used to convey information to the user in an effective and engaging way. The aim is to supply the reader with a clear understanding of an important emerging area of research and practice in product design, referred to as dynamic products, which is opening up new possibilities for the integration of product design with digital and smart technologies and offering an alternative to the use of digital interfaces. Dynamic products are artifacts displaying sensory characteristics – visual, tactile, auditory, or olfactory – that change in a proactive and reversible way over time, addressing one or more of the user's senses. The reader will learn why and how to communicate by means of such dynamic products. Their potential advantages and limitations are identified and design tools are proposed to support the design activity. It is hoped that the book will stimulate the design community to reflect upon the ever more compelling need to merg...

A qualitative risk assessment approach for Swiss dairy products: opportunities and limitations.

Science.gov (United States)

Menéndez González, S; Hartnack, S; Berger, T; Doherr, M; Breidenbach, E

2011-05-01

Switzerland implemented a risk-based monitoring of Swiss dairy products in 2002 based on a risk assessment (RA) that considered the probability of exceeding a microbiological limit value set by law. A new RA was launched in 2007 to review and further develop the previous assessment, and to make recommendations for future risk-based monitoring according to current risks. The resulting qualitative RA was designed to ascertain the risk to human health from the consumption of Swiss dairy products. The products and microbial hazards to be considered in the RA were determined based on a risk profile. The hazards included Campylobacter spp., Listeria monocytogenes, Salmonella spp., Shiga toxin-producing Escherichia coli, coagulase-positive staphylococci and Staphylococcus aureus enterotoxin. The release assessment considered the prevalence of the hazards in bulk milk samples, the influence of the process parameters on the microorganisms, and the influence of the type of dairy. The exposure assessment was linked to the production volume. An overall probability was estimated combining the probabilities of release and exposure for each combination of hazard, dairy product and type of dairy. This overall probability represents the likelihood of a product from a certain type of dairy exceeding the microbiological limit value and being passed on to the consumer. The consequences could not be fully assessed due to lack of detailed information on the number of disease cases caused by the consumption of dairy products. The results were expressed as a ranking of overall probabilities. Finally, recommendations for the design of the risk-based monitoring programme and for filling the identified data gaps were given. The aims of this work were (i) to present the qualitative RA approach for Swiss dairy products, which could be adapted to other settings and (ii) to discuss the opportunities and limitations of the qualitative method. © 2010 Blackwell Verlag GmbH.

17 CFR 160.11 - Limits on redisclosure and reuse of information.

Science.gov (United States)

2010-04-01

... COMMISSION PRIVACY OF CONSUMER FINANCIAL INFORMATION Limits on Disclosures § 160.11 Limits on redisclosure... personal information from a nonaffiliated financial institution under an exception in §§ 160.14 or 160.15, your disclosure and use of that information is limited as follows: (i) You may disclose the information...

12 CFR 573.11 - Limits on redisclosure and reuse of information.

Science.gov (United States)

2010-01-01

... PRIVACY OF CONSUMER FINANCIAL INFORMATION Limits on Disclosures § 573.11 Limits on redisclosure and reuse... information from a nonaffiliated financial institution under an exception in § 573.14 or 573.15 of this part, your disclosure and use of that information is limited as follows: (i) You may disclose the information...

Impurity production and transport at limiters

International Nuclear Information System (INIS)

Matthews, G.F.

1989-01-01

This paper concentrates on the description and evaluation of experiments on the DITE tokamak. These are designed to characterise the processes involved in the production and transport of neutral and ionised impurities near carbon limiters. The need for good diagnostics in the scrape-off layer is highlighted. Langmuir probes are used to provide input data for models of impurity production at limiters. Observations of the radial profiles of carbon and oxygen impurities are compared with the code predictions. Changeover experiments involving hydrogen and helium plasmas are used as a means for investigating the role of the atomic physics and chemistry. The impurity control limiter (ICL) experiment is described which shows how geometry plays an important role in determining the spatial distributions of the neutral and ionised carbon. New diagnostics are required to study the flux and charge state distribution of impurities in the boundary. Preliminary results from an in-situ plasma ion mass-spectrometer are presented. The role of oxygen and the importance of evaluating the wall sources of impurity are emphasised. (orig.)

Application of MODIS Land Products to Assessment of Land Degradation of Alpine Rangeland in Northern India with Limited Ground-Based Information

Directory of Open Access Journals (Sweden)

Masahiro Tasumi

2014-09-01

Full Text Available Land degradation of alpine rangeland in Dachigam National Park, Northern India, was evaluated in this study using MODerate resolution Imaging Spectroradiometer (MODIS land products. The park has been used by a variety of livestock holders. With increasing numbers of livestock, the managers and users of the park are apprehensive about degradation of the grazing land. However, owing to weak infrastructure for scientific and statistical data collection and sociopolitical restrictions in the region, a lack of quality ground-based weather, vegetation, and livestock statistical data had prevented scientific assessment. Under these circumstances, the present study aimed to assess the rangeland environment and its degradation using MODIS vegetation, snow, and evapotranspiration products as primary input data for assessment. The result of the analysis indicated that soil water content and the timing of snowmelt play an important role in grass production in the area. Additionally, the possibility of land degradation in heavily-grazed rangeland was indicated via a multiple regression analysis at a decadal timescale, whereas weather conditions, such as rainfall and snow cover, primarily explained year-by-year differences in grass production. Although statistical uncertainties remain in the results derived in this study, the satellite-based data and the analyses will promote understanding of the rangeland environment and suggest the potential for unsustainable land management based on statistical probability. This study provides an important initial evaluation of alpine rangeland, for which ground-based information is limited.

16 CFR 313.11 - Limits on redisclosure and reuse of information.

Science.gov (United States)

2010-01-01

... ACTS OF CONGRESS PRIVACY OF CONSUMER FINANCIAL INFORMATION Limits on Disclosures § 313.11 Limits on... nonpublic personal information from a nonaffiliated financial institution under an exception in § 313.14 or 313.15 of this part, your disclosure and use of that information is limited as follows: (i) You may...

12 CFR 332.11 - Limits on redisclosure and reuse of information.

Science.gov (United States)

2010-01-01

... STATEMENTS OF GENERAL POLICY PRIVACY OF CONSUMER FINANCIAL INFORMATION Limits on Disclosures § 332.11 Limits... receive nonpublic personal information from a nonaffiliated financial institution under an exception in § 332.14 or 332.15 of this part, your disclosure and use of that information is limited as follows: (i...

12 CFR 716.11 - Limits on redisclosure and reuse of information.

Science.gov (United States)

2010-01-01

... CREDIT UNIONS PRIVACY OF CONSUMER FINANCIAL INFORMATION Limits on Disclosures § 716.11 Limits on... nonpublic personal information from a nonaffiliated financial institution under an exception in § 716.14 or 716.15 of this part, your disclosure and use of that information is limited as follows: (i) You may...

Modeling intermediate product selection under production and storage capacity limitations in food processing

DEFF Research Database (Denmark)

Kilic, Onur Alper; Akkerman, Renzo; Grunow, Martin

2009-01-01

In the food industry products are usually characterized by their recipes, which are specified by various quality attributes. For end products, this is given by customer requirements, but for intermediate products, the recipes can be chosen in such a way that raw material procurement costs and pro...... with production and inventory planning, thereby considering the production and storage capacity limitations. The resulting model can be used to solve an important practical problem typical for many food processing industries.......In the food industry products are usually characterized by their recipes, which are specified by various quality attributes. For end products, this is given by customer requirements, but for intermediate products, the recipes can be chosen in such a way that raw material procurement costs...... and processing costs are minimized. However, this product selection process is bound by production and storage capacity limitations, such as the number and size of storage tanks or silos. In this paper, we present a mathematical programming approach that combines decision making on product selection...

Production and Productivity Effects of Informal Contract Farming in ...

African Journals Online (AJOL)

This paper uses data from a 2001 household survey of small-scale farming households in Kirinyaga District, Kenya to explore production effects of informal credit contracts in French bean farming where formal markets for surplus production are seemingly shallow and imperfect. Specifically, it examines whether informal ...

Information logistics: A production-line approach to information services

Science.gov (United States)

Adams, Dennis; Lee, Chee-Seng

1991-01-01

Logistics can be defined as the process of strategically managing the acquisition, movement, and storage of materials, parts, and finished inventory (and the related information flow) through the organization and its marketing channels in a cost effective manner. It is concerned with delivering the right product to the right customer in the right place at the right time. The logistics function is composed of inventory management, facilities management, communications unitization, transportation, materials management, and production scheduling. The relationship between logistics and information systems is clear. Systems such as Electronic Data Interchange (EDI), Point of Sale (POS) systems, and Just in Time (JIT) inventory management systems are important elements in the management of product development and delivery. With improved access to market demand figures, logisticians can decrease inventory sizes and better service customer demand. However, without accurate, timely information, little, if any, of this would be feasible in today's global markets. Information systems specialists can learn from logisticians. In a manner similar to logistics management, information logistics is concerned with the delivery of the right data, to the ring customer, at the right time. As such, information systems are integral components of the information logistics system charged with providing customers with accurate, timely, cost-effective, and useful information. Information logistics is a management style and is composed of elements similar to those associated with the traditional logistics activity: inventory management (data resource management), facilities management (distributed, centralized and decentralized information systems), communications (participative design and joint application development methodologies), unitization (input/output system design, i.e., packaging or formatting of the information), transportations (voice, data, image, and video communication systems

Possibilities and limitations for sustainable bioenergy production systems

International Nuclear Information System (INIS)

Smeets, Edward Martinus Wilhelmus Utrecht University

2008-05-01

The main objective of this thesis is to investigate the possibilities and limitations of sustainable bioenergy production. To this end, the following research questions have been formulated: (1). What is the potential of different world regions to produce biomass for energy generation in the year 2050, taking account of biological and climatological limitations, the use of biomass to produce food, materials and traditional bioenergy, as well as the need to maintain existing forests and thus protect biodiversity?; (2) What are the main bottlenecks to formulating and implementing sustainability criteria for bioenergy production?; (3) To what extent does complying with sustainability criteria have impacts on the costs and potential of bioenergy production?; (4) To what extent do fertilizer- and manure-induced nitrous oxide (N2O) emissions due to energy crop production have an impact on the reduction of greenhouse gas (GHG) emissions when conventional transportation fuels are replaced by first-generation biofuels?; (5) In terms of economic and environmental performance, how does Europe's production, storage and transport of miscanthus and switchgrass in 2004 compare to that in 2030? Throughout this thesis, specific attention is paid to knowledge gaps and their potential impact on results, the aim being to identify priorities for future research and development. Another key element of our research is that we evaluate the possibilities and limitations of strategies that are designed to improve the performance of bioenergy production systems and that may be incorporated in bioenergy certification schemes and bioenergy promoting policies

Climate agreements under limited participation, asymmetric information and market imperfections

Energy Technology Data Exchange (ETDEWEB)

Hagem, Cathrine

1996-12-31

This thesis relates to climate agreements and cost efficiency by analysing the formation of a system of quota leading to distributed discharge of emissions between countries. Main fields concerned are the greenhouse effect, the political process, efficient and cost-effective climate agreements, and climate agreements under limited participation, asymmetric information and market imperfections covering fields like limited participation in climate agreements, limited participation and indirect impact on non-participating countries` emissions, limited participation and direct impact on non-participating countries` emissions under asymmetric information, and non-competitive market for tradeable quotas. 166 refs., 7 tabs.

Engineering Information Infrastructure for Product Lifecycle Managment

Science.gov (United States)

Kimura, Fumihiko

For proper management of total product life cycle, it is fundamentally important to systematize design and engineering information about product systems. For example, maintenance operation could be more efficiently performed, if appropriate parts design information is available at the maintenance site. Such information shall be available as an information infrastructure for various kinds of engineering operations, and it should be easily accessible during the whole product life cycle, such as transportation, marketing, usage, repair/upgrade, take-back and recycling/disposal. Different from the traditional engineering database, life cycle support information has several characteristic requirements, such as flexible extensibility, distributed architecture, multiple viewpoints, long-time archiving, and product usage information, etc. Basic approaches for managing engineering information infrastructure are investigated, and various information contents and associated life cycle applications are discussed.

Experimental limits from ATLAS on Standard Model Higgs production.

CERN Multimedia

ATLAS, collaboration

2012-01-01

Experimental limits from ATLAS on Standard Model Higgs production in the mass range 110-600 GeV. The solid curve reflects the observed experimental limits for the production of a Higgs of each possible mass value (horizontal axis). The region for which the solid curve dips below the horizontal line at the value of 1 is excluded with a 95% confidence level (CL). The dashed curve shows the expected limit in the absence of the Higgs boson, based on simulations. The green and yellow bands correspond (respectively) to 68%, and 95% confidence level regions from the expected limits. Higgs masses in the narrow range 123-130 GeV are the only masses not excluded at 95% CL

47 CFR 64.4006 - Limitations on use of customer account information.

Science.gov (United States)

2010-10-01

... Exchange Requirements § 64.4006 Limitations on use of customer account information. A carrier that receives customer account information under this section shall use such information to ensure timely and accurate... 47 Telecommunication 3 2010-10-01 2010-10-01 false Limitations on use of customer account...

Neutrino Charm Production and a Limit to Neutrino Oscillations

Energy Technology Data Exchange (ETDEWEB)

Bailey, David Charles [McGill U.

1983-10-01

The production of charmed particles and a limit to tau lepton production have been measured using a hybrid emulsion spectrometer in the Fermilab wide-band neutrino beam. The relative cross section for charged current charmed particle production is $\\sigma(\

Withholding differential risk information on legal consumer nicotine/tobacco products: The public health ethics of health information quarantines.

Science.gov (United States)

Kozlowski, Lynn T; Sweanor, David

2016-06-01

The United States provides an example of a country with (a) legal tobacco/nicotine products (e.g., snus, other smokeless tobacco, cigarettes) differing greatly in risks to health and (b) respected health information websites that continue to omit or provide incorrect differential risk information. Concern for the principles of individual rights, health literacy, and personal autonomy (making decisions for oneself), which are key principles of public health ethics, has been countered by utilitarian arguments for the use of misleading or limited information to protect public health overall. We argue that omitting key health relevant information for current or prospective consumers represents a kind of quarantine of health-relevant information. As with disease quarantines, the coercive effects of quarantining information on differential risks need to be justified, not merely by fears of net negative public health effects, but by convincing evidence that such measures are actually warranted, that public health overall is in imminent danger and that the danger is sufficient to override principles of individual autonomy. Omitting such health-relevant information for consumers of such products effectively blindfolds them and impairs their making informed personal choices. Moral psychological issues that treat all tobacco/nicotine products similarly may also be influencing the reluctance to inform on differential risks. In countries where tobacco/nicotine products are legally sold and also differ greatly in disease risks compared to cigarettes (e.g., smokeless tobacco and vape), science-based, comprehensible, and actionable health information (consistent with health literacy principles) on differential risks should be available and only reconsidered if it is established that this information is causing losses to population health overall. Copyright © 2016 The Authors. Published by Elsevier B.V. All rights reserved.

Exploring the e-Supply Chain of Information Products

OpenAIRE

Raafat George Saadé

2012-01-01

Digital information product producers have not taken advantage of the e-supply chain paradigm of today. However, in this information-based sector, a different set of supply chain management challenges exist. Very little research has been done in the supply chain of information products. This study focuses on the process analysis of the supply chain paradigm for digital information products. A framework for digital information products production in e-learning is proposed followed by an exampl...

Physiology limits commercially viable photoautotrophic production of microalgal biofuels.

Science.gov (United States)

Kenny, Philip; Flynn, Kevin J

2017-01-01

Algal biofuels have been offered as an alternative to fossil fuels, based on claims that microalgae can provide a highly productive source of compounds as feedstocks for sustainable transport fuels. Life cycle analyses identify algal productivity as a critical factor affecting commercial and environmental viability. Here, we use mechanistic modelling of the biological processes driving microalgal growth to explore optimal production scenarios in an industrial setting, enabling us to quantify limits to algal biofuels potential. We demonstrate how physiological and operational trade-offs combine to restrict the potential for solar-powered algal-biodiesel production in open ponds to a ceiling of ca. 8000 L ha -1 year -1 . For industrial-scale operations, practical considerations limit production to ca. 6000 L ha -1 year -1 . According to published economic models and life cycle analyses, such production rates cannot support long-term viable commercialisation of solar-powered cultivation of natural microalgae strains exclusively as feedstock for biofuels. The commercial viability of microalgal biofuels depends critically upon limitations in microalgal physiology (primarily in rates of C-fixation); we discuss the scope for addressing this bottleneck concluding that even deployment of genetically modified microalgae with radically enhanced characteristics would leave a very significant logistical if not financial burden.

Limitations in global information on species occurrences

Directory of Open Access Journals (Sweden)

Carsten Meyer

2016-07-01

Full Text Available Detailed information on species distributions is crucial for answering central questions in biogeography, ecology, evolutionary biology and conservation. Millions of species occurrence records have been mobilized via international data-sharing networks, but inherent biases, gaps and uncertainties hamper broader application. In my PhD thesis, I presented the first comprehensive analyses of global patterns and drivers of these limitations across different taxonomic groups and spatial scales. Integrating 300 million occurrence records for terrestrial vertebrates and plants with comprehensive taxonomic databases, expert range maps and regional checklists, I demonstrated extensive taxonomic, geographical and temporal biases, gaps and uncertainties. I identified key socio-economic drivers of data bias across different taxonomic groups and spatial scales. The results of my dissertation provide an empirical baseline for effectively accounting for data limitations in distribution models, as well as for prioritizing and monitoring efforts to collate additional occurrence information.

Strategic analysis of International Forest Products Limited

OpenAIRE

Modesto, Robin M.

2005-01-01

International Forest Products Limited is a sawmilling company that produces softwood lumber for sale in domestic and international markets including the United States and Japan. Production facilities located in British Columbia, Washington and Oregon produce nearly 1.5 billion board feet of lumber annually. Timber is secured through Crown forest tenure holdings and external open market purchases. This paper includes: a strategic analysis of the firm; an industry analysis; a strategic fit anal...

Compliance of feed limits, does not mean compliance of food limits

Directory of Open Access Journals (Sweden)

van Raamsdonk LWD.

2009-01-01

Full Text Available The carry-over of contaminants from feed to animal food products is an important aspect of the animal production chain. For a proper containment, limits for feed as well food products are fixed for a series of chemicals, e.g. dioxins and dioxin-like PCBs, lead, cadmium, some chlorinated pesticides, and aflatoxin B1 (and its metabolite M1 in milk. The relationship between feed and food limits is an important issue. An ideal goal is to assure that compliance to a feed limits automatically results in compliance to food limits. In order to collect information about this relationship, several simulation models and a large database on transfer factors have been developed. An optimal choice between either a model or an application of data from the Transfer Database is based on both the knowledge level, and on the circumstances of the specific situation. To reach and validate such an optimal choice an Expert System Carry-Over is currently in development, containing four different modules: 1 the different calculation models and the Transfer Database, 2 a decision tree for choosing the optimal strategy, 3 data tables indicating knowledge levels of compound/animal/product parameters, and 4 supporting databases containing information on consumption and composition of daily diets, animal parameters, and amounts of (daily production. Calculations indicate that for dioxins compliance to feed levels does not necessarily mean that food limits are complied as well. Besides an estimation of the compliance to limits, the expert system is a tool for feed related risk assessments, and for planning of future research.

16 CFR 313.12 - Limits on sharing account number information for marketing purposes.

Science.gov (United States)

2010-01-01

... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Limits on sharing account number information... REGULATIONS UNDER SPECIFIC ACTS OF CONGRESS PRIVACY OF CONSUMER FINANCIAL INFORMATION Limits on Disclosures § 313.12 Limits on sharing account number information for marketing purposes. (a) General prohibition on...

12 CFR 40.12 - Limits on sharing account number information for marketing purposes.

Science.gov (United States)

2010-01-01

... 12 Banks and Banking 1 2010-01-01 2010-01-01 false Limits on sharing account number information... OF THE TREASURY PRIVACY OF CONSUMER FINANCIAL INFORMATION Limits on Disclosures § 40.12 Limits on sharing account number information for marketing purposes. (a) General prohibition on disclosure of...

12 CFR 216.12 - Limits on sharing account number information for marketing purposes.

Science.gov (United States)

2010-01-01

... 12 Banks and Banking 2 2010-01-01 2010-01-01 false Limits on sharing account number information... GOVERNORS OF THE FEDERAL RESERVE SYSTEM PRIVACY OF CONSUMER FINANCIAL INFORMATION (REGULATION P) Limits on Disclosures § 216.12 Limits on sharing account number information for marketing purposes. (a) General...

12 CFR 573.12 - Limits on sharing account number information for marketing purposes.

Science.gov (United States)

2010-01-01

... 12 Banks and Banking 5 2010-01-01 2010-01-01 false Limits on sharing account number information..., DEPARTMENT OF THE TREASURY PRIVACY OF CONSUMER FINANCIAL INFORMATION Limits on Disclosures § 573.12 Limits on sharing account number information for marketing purposes. (a) General prohibition on disclosure of...

12 CFR 332.12 - Limits on sharing account number information for marketing purposes.

Science.gov (United States)

2010-01-01

... 12 Banks and Banking 4 2010-01-01 2010-01-01 false Limits on sharing account number information... REGULATIONS AND STATEMENTS OF GENERAL POLICY PRIVACY OF CONSUMER FINANCIAL INFORMATION Limits on Disclosures § 332.12 Limits on sharing account number information for marketing purposes. (a) General prohibition on...

Using market information in product development

DEFF Research Database (Denmark)

Søndergaard, Helle Alsted; Harmsen, Hanne

2007-01-01

development are also fulfilled since the development teams recognize the value of the information and actively use it in their product development decision making. However, the means-end approach cannot (in its present form) reveal experienced quality since the approach includes no trying of the product...... of abstraction in consumers' minds. At the same time they are reminded that this information should feed into the process of making decisions in product development....... on the understanding of consumers' vertical and horizontal decision structure) combined with considerations on effective internal use of the information. Design/methodology/approach - The suggested model is applied in case studies in an action research project, and experiences with the application are discussed...

The Usage of Social Media as an Information Seeking Tool of Halal Food Products

Directory of Open Access Journals (Sweden)

Siti Zanariah Yusoff

2016-11-01

Full Text Available The purpose of this paper is to examine the role of social media as an information seeking tool of halal food products among Muslim. This is a conceptual paper which employed a comprehensive review to investigate strategy used by Muslim family in information seeking of halal food products using social media.  This study had revealed that respondents are likely to use social media in search for information regarding halal foods. As expected by the researchers, children tend to be the majority users of social networking sites compared to their parents. It is crucial for each Muslim to seek information about halal foods as there are too much dumping information that lead to confusion among consumers. Other than that, this study proved the usage of social media not only limited to entertainment yet it plays a vital part as an information seeking tools as well.

Decoupling production from growth by magnesium sulfate limitation boosts de novo limonene production.

Science.gov (United States)

Willrodt, Christian; Hoschek, Anna; Bühler, Bruno; Schmid, Andreas; Julsing, Mattijs K

2016-06-01

The microbial production of isoprenoids has recently developed into a prime example for successful bottom-up synthetic biology or top-down systems biology strategies. Respective fermentation processes typically rely on growing recombinant microorganisms. However, the fermentative production of isoprenoids has to compete with cellular maintenance and growth for carbon and energy. Non-growing but metabolically active E. coli cells were evaluated in this study as alternative biocatalyst configurations to reduce energy and carbon loss towards biomass formation. The use of non-growing cells in an optimized fermentation medium resulted in more than fivefold increased specific limonene yields on cell dry weight and glucose, as compared to the traditional growing-cell-approach. Initially, the stability of the resting-cell activity was limited. This instability was overcome via the optimization of the minimal fermentation medium enabling high and stable limonene production rates for up to 8 h and a high specific yield of ≥50 mg limonene per gram cell dry weight. Omitting MgSO4 from the fermentation medium was very promising to prohibit growth and allow high productivities. Applying a MgSO4 -limitation also improved limonene formation by growing cells during non-exponential growth involving a reduced biomass yield on glucose and a fourfold increase in specific limonene yields on biomass as compared to non-limited cultures. The control of microbial growth via the medium composition was identified as a key but yet underrated strategy for efficient isoprenoid production. Biotechnol. Bioeng. 2016;113: 1305-1314. © 2015 Wiley Periodicals, Inc. © 2015 Wiley Periodicals, Inc.

Enriching step-based product information models to support product life-cycle activities

Science.gov (United States)

Sarigecili, Mehmet Ilteris

The representation and management of product information in its life-cycle requires standardized data exchange protocols. Standard for Exchange of Product Model Data (STEP) is such a standard that has been used widely by the industries. Even though STEP-based product models are well defined and syntactically correct, populating product data according to these models is not easy because they are too big and disorganized. Data exchange specifications (DEXs) and templates provide re-organized information models required in data exchange of specific activities for various businesses. DEXs show us it would be possible to organize STEP-based product models in order to support different engineering activities at various stages of product life-cycle. In this study, STEP-based models are enriched and organized to support two engineering activities: materials information declaration and tolerance analysis. Due to new environmental regulations, the substance and materials information in products have to be screened closely by manufacturing industries. This requires a fast, unambiguous and complete product information exchange between the members of a supply chain. Tolerance analysis activity, on the other hand, is used to verify the functional requirements of an assembly considering the worst case (i.e., maximum and minimum) conditions for the part/assembly dimensions. Another issue with STEP-based product models is that the semantics of product data are represented implicitly. Hence, it is difficult to interpret the semantics of data for different product life-cycle phases for various application domains. OntoSTEP, developed at NIST, provides semantically enriched product models in OWL. In this thesis, we would like to present how to interpret the GD & T specifications in STEP for tolerance analysis by utilizing OntoSTEP.

Degree product rule tempers explosive percolation in the absence of global information

Science.gov (United States)

Trevelyan, Alexander J.; Tsekenis, Georgios; Corwin, Eric I.

2018-02-01

We introduce a guided network growth model, which we call the degree product rule process, that uses solely local information when adding new edges. For small numbers of candidate edges our process gives rise to a second-order phase transition, but becomes first order in the limit of global choice. We provide the set of critical exponents required to characterize the nature of this percolation transition. Such a process permits interventions which can delay the onset of percolation while tempering the explosiveness caused by cluster product rule processes.

Fine-resolution conservation planning with limited climate-change information.

Science.gov (United States)

Shah, Payal; Mallory, Mindy L; Ando, Amy W; Guntenspergen, Glenn R

2017-04-01

Climate-change induced uncertainties in future spatial patterns of conservation-related outcomes make it difficult to implement standard conservation-planning paradigms. A recent study translates Markowitz's risk-diversification strategy from finance to conservation settings, enabling conservation agents to use this diversification strategy for allocating conservation and restoration investments across space to minimize the risk associated with such uncertainty. However, this method is information intensive and requires a large number of forecasts of ecological outcomes associated with possible climate-change scenarios for carrying out fine-resolution conservation planning. We developed a technique for iterative, spatial portfolio analysis that can be used to allocate scarce conservation resources across a desired level of subregions in a planning landscape in the absence of a sufficient number of ecological forecasts. We applied our technique to the Prairie Pothole Region in central North America. A lack of sufficient future climate information prevented attainment of the most efficient risk-return conservation outcomes in the Prairie Pothole Region. The difference in expected conservation returns between conservation planning with limited climate-change information and full climate-change information was as large as 30% for the Prairie Pothole Region even when the most efficient iterative approach was used. However, our iterative approach allowed finer resolution portfolio allocation with limited climate-change forecasts such that the best possible risk-return combinations were obtained. With our most efficient iterative approach, the expected loss in conservation outcomes owing to limited climate-change information could be reduced by 17% relative to other iterative approaches. © 2016 Society for Conservation Biology.

Fine‐resolution conservation planning with limited climate‐change information

Science.gov (United States)

Shah, Payal; Mallory, Mindy L.; Ando , Amy W.; Guntenspergen, Glenn R.

2017-01-01

Climate‐change induced uncertainties in future spatial patterns of conservation‐related outcomes make it difficult to implement standard conservation‐planning paradigms. A recent study translates Markowitz's risk‐diversification strategy from finance to conservation settings, enabling conservation agents to use this diversification strategy for allocating conservation and restoration investments across space to minimize the risk associated with such uncertainty. However, this method is information intensive and requires a large number of forecasts of ecological outcomes associated with possible climate‐change scenarios for carrying out fine‐resolution conservation planning. We developed a technique for iterative, spatial portfolio analysis that can be used to allocate scarce conservation resources across a desired level of subregions in a planning landscape in the absence of a sufficient number of ecological forecasts. We applied our technique to the Prairie Pothole Region in central North America. A lack of sufficient future climate information prevented attainment of the most efficient risk‐return conservation outcomes in the Prairie Pothole Region. The difference in expected conservation returns between conservation planning with limited climate‐change information and full climate‐change information was as large as 30% for the Prairie Pothole Region even when the most efficient iterative approach was used. However, our iterative approach allowed finer resolution portfolio allocation with limited climate‐change forecasts such that the best possible risk‐return combinations were obtained. With our most efficient iterative approach, the expected loss in conservation outcomes owing to limited climate‐change information could be reduced by 17% relative to other iterative approaches.

Marketing Information Products and Services : A Primer for ...

International Development Research Centre (IDRC) Digital Library (Canada)

Marketing Information Products and Services : A Primer for Librarians and Information Professionals. Couverture du livre Marketing Information Products and Services : A Primer for Librarians and Information Professionals. Directeur(s) : Abhinandan K. Jain, Ashok Jambhekar, T.P.Rama Rao et S. Sreenivas Rao. Maison(s) ...

Pregnancy and lactation advice: How does Australian Product Information compare with established information resources?

Science.gov (United States)

Brown, Emma; Hotham, Elizabeth; Hotham, Neil

2016-09-01

Product information is a popular medicines information resource; however, there is some evidence that its pregnancy and lactation information is overconservative, which can lead to inadequate treatment of pregnant and lactating women. A thorough analysis of pregnancy and lactation information within Australian Product Information and Consumer Medicines Information was performed. The statements within these resources were compared with established clinical resources: Australian Medicines Handbook, Therapeutic Guidelines, South Australian Perinatal Practice Guidelines, Organization of Teratology Information Specialists, LactMed, Motherisk and the Pregnancy and Breastfeeding Medicines Guide published by the Royal Women's Hospital Melbourne. Product Information was found to be the most cautious resource, with 44.5% of pregnancy recommendations and 69% of lactation recommendations reviewed being more conservative than other resources. Product Information is an imperfect and often overconservative reference for pregnant and lactating women. Health professionals are urged to review established clinical resources to inform decision making.

Lack of pollinators limits fruit production in commercial blueberry (Vaccinium corymbosum).

Science.gov (United States)

Benjamin, Faye E; Winfree, Rachael

2014-12-01

Modern agriculture relies on domesticated pollinators such as the honey bee (Apis mellifera L.), and to a lesser extent on native pollinators, for the production of animal-pollinated crops. There is growing concern that pollinator availability may not keep pace with increasing agricultural production. However, whether crop production is in fact pollen-limited at the field scale has rarely been studied. Here, we ask whether commercial highbush blueberry (Vaccinium corymbosum L.) production in New Jersey is limited by a lack of pollination even when growers provide honey bees at recommended densities. We studied two varieties of blueberry over 3 yr to determine whether blueberry crop production is pollen-limited and to measure the relative contributions of honey bees and native bees to blueberry pollination. We found two lines of evidence for pollen limitation. First, berries receiving supplemental hand-pollination were generally heavier than berries receiving ambient pollination. Second, mean berry mass increased significantly and nonasymptotically with honey bee flower visitation rate. While honey bees provided 86% of pollination and thus drove the findings reported above, native bees still contributed 14% of total pollination even in our conventionally managed, high-input agricultural system. Honey bees and native bees were also similarly efficient as pollinators on a per-visit basis. Overall, our study shows that pollination can be a limiting factor in commercial fruit production. Yields might increase with increased honey bee stocking rates and improved dispersal of hives within crop fields, and with habitat restoration to increase pollination provided by native bees.

Distribution of the product confidence limits for the indirect effect: Program PRODCLIN

Science.gov (United States)

MacKinnon, David P.; Fritz, Matthew S.; Williams, Jason; Lockwood, Chondra M.

2010-01-01

This article describes a program, PRODCLIN (distribution of the PRODuct Confidence Limits for INdirect effects), written for SAS, SPSS, and R, that computes confidence limits for the product of two normal random variables. The program is important because it can be used to obtain more accurate confidence limits for the indirect effect, as demonstrated in several recent articles (MacKinnon, Lockwood, & Williams, 2004; Pituch, Whittaker, & Stapleton, 2005). Tests of the significance of and confidence limits for indirect effects based on the distribution of the product method have more accurate Type I error rates and more power than other, more commonly used tests. Values for the two paths involved in the indirect effect and their standard errors are entered in the PRODCLIN program, and distribution of the product confidence limits are computed. Several examples are used to illustrate the PRODCLIN program. The PRODCLIN programs in rich text format may be downloaded from www.psychonomic.org/archive. PMID:17958149

Application of the risk-informed methodology for APR1400 P-T limits curve

Energy Technology Data Exchange (ETDEWEB)

Kim, K.; Namgung, I. [KEPCO International Nuclear Graduate School, Ulsan (Korea, Republic of)

2014-07-01

A reactor pressure vessel (RPV) in a nuclear power plant has operational limits of pressure and temperature to prevent a potential drastic propagation of cracks due to brittle fracture. We call it a pressure-temperature limits curve (P-T limits curve). Appendix G of the American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code, Section XI, provides deterministic procedures to develop the P-T limits curve for the reactor pressure vessel. Recently, an alternative risk-informed methodology has been added in the ASME Code. Risk-informed means that we can consider insights from a probabilistic risk assessment by using this methodology. This alternative methodology provides a simple procedure to develop risk-informed P-T limits for heat up, cool down, and hydrostatic test events. The risk-informed P-T limits curve is known to provide more operational flexibility, particularly for reactor pressure vessels with relatively high irradiation levels and radiation sensitive materials. In this paper, we developed both the deterministic and a risk-informed P-T limits curve for an APR1400 reactor using Appendix G of the ASME Code, Section XI and compare the results in terms of additional operational margin. (author)

High Production Volume Information System (HPVIS)

Data.gov (United States)

U.S. Environmental Protection Agency — The High Production Volume Information System (HPVIS) provides access to select health and environmental effect information on chemicals that are manufactured in...

Probabilistic inference of fatigue damage propagation with limited and partial information

Directory of Open Access Journals (Sweden)

Huang Min

2015-08-01

Full Text Available A general method of probabilistic fatigue damage prognostics using limited and partial information is developed. Limited and partial information refers to measurable data that are not enough or cannot directly be used to statistically identify model parameter using traditional regression analysis. In the proposed method, the prior probability distribution of model parameters is derived based on the principle of maximum entropy (MaxEnt using the limited and partial information as constraints. The posterior distribution is formulated using the principle of maximum relative entropy (MRE to perform probability updating when new information is available and reduces uncertainty in prognosis results. It is shown that the posterior distribution is equivalent to a Bayesian posterior when the new information used for updating is point measurements. A numerical quadrature interpolating method is used to calculate the asymptotic approximation for the prior distribution. Once the prior is obtained, subsequent measurement data are used to perform updating using Markov chain Monte Carlo (MCMC simulations. Fatigue crack prognosis problems with experimental data are presented for demonstration and validation.

EPD--environmental product declarations for wood products : an application of life cycle information about forest products

Science.gov (United States)

Richard Bergman; Adam Taylor

2011-01-01

Transparent and credible environmental labeling of products is vital for a sustainable future. Ecolabeling shows information on the environmental performance of products, processes, and services. This article focuses on one type of ecolabeling referred to as environmental product declarations (EPDs) that provide environmental impact information based on life cycle...

Sum rule limitations of kinetic particle-production models

International Nuclear Information System (INIS)

Knoll, J.; CEA Centre d'Etudes Nucleaires de Grenoble, 38; Guet, C.

1988-04-01

Photoproduction and absorption sum rules generalized to systems at finite temperature provide a stringent check on the validity of kinetic models for the production of hard photons in intermediate energy nuclear collisions. We inspect such models for the case of nuclear matter at finite temperature employed in a kinetic regime which copes those encountered in energetic nuclear collisions, and find photon production rates which significantly exceed the limits imposed by the sum rule even under favourable concession. This suggests that coherence effects are quite important and the production of photons cannot be considered as an incoherent addition of individual NNγ production processes. The deficiencies of present kinetic models may also apply for the production of probes such as the pion which do not couple perturbatively to the nuclear currents. (orig.)

Lost in transportation: Information measures and cognitive limits in multilayer navigation.

Science.gov (United States)

Gallotti, Riccardo; Porter, Mason A; Barthelemy, Marc

2016-02-01

Cities and their transportation systems become increasingly complex and multimodal as they grow, and it is natural to wonder whether it is possible to quantitatively characterize our difficulty navigating in them and whether such navigation exceeds our cognitive limits. A transition between different search strategies for navigating in metropolitan maps has been observed for large, complex metropolitan networks. This evidence suggests the existence of a limit associated with cognitive overload and caused by a large amount of information that needs to be processed. In this light, we analyzed the world's 15 largest metropolitan networks and estimated the information limit for determining a trip in a transportation system to be on the order of 8 bits. Similar to the "Dunbar number," which represents a limit to the size of an individual's friendship circle, our cognitive limit suggests that maps should not consist of more than 250 connection points to be easily readable. We also show that including connections with other transportation modes dramatically increases the information needed to navigate in multilayer transportation networks. In large cities such as New York, Paris, and Tokyo, more than 80% of the trips are above the 8-bit limit. Multimodal transportation systems in large cities have thus already exceeded human cognitive limits and, consequently, the traditional view of navigation in cities has to be revised substantially.

12 CFR 216.11 - Limits on redisclosure and reuse of information.

Science.gov (United States)

2010-01-01

... RESERVE SYSTEM PRIVACY OF CONSUMER FINANCIAL INFORMATION (REGULATION P) Limits on Disclosures § 216.11... disclose that information to a third party for marketing purposes or use that information for your own marketing purposes. (b)(1) Information you receive outside of an exception. If you receive nonpublic...

Influence of Information Product Quality on Informing Users: A Web Portal Context

Directory of Open Access Journals (Sweden)

Junghyun Nam

2016-11-01

Full Text Available Web portals have been used as information products to deliver personalized, feature-rich, and flexible information needs to Internet users. However, all portals are not equal. Most of them have relatively a small number of visitors, while a few capture the majority of surfers. This study seeks to uncover the factors that contribute the perceived quality of a general portal. Based on 21 factors derived from an extensive literature review on Information Product Quality (IPQ, web usage, and media use, an experimental study was conducted to identify the factors that are perceived by web portal users as most relevant. The literature categorizes quality factors of an information product in three dimensions: information, physical, and service. This experiment suggests a different clustering of factors: Content relevancy, Communication interactiveness, Information currency, and Instant gratification. The findings in this study will help developers find a more customer-oriented approach to developing high-traffic portals.

12 CFR 716.12 - Limits on sharing of account number information for marketing purposes.

Science.gov (United States)

2010-01-01

... 12 Banks and Banking 6 2010-01-01 2010-01-01 false Limits on sharing of account number information... REGULATIONS AFFECTING CREDIT UNIONS PRIVACY OF CONSUMER FINANCIAL INFORMATION Limits on Disclosures § 716.12 Limits on sharing of account number information for marketing purposes. (a) General prohibition on...

Organic wine production in Brazil: Challenges and limitations / La production de vin biologique au Brésil – défis et limitations

Directory of Open Access Journals (Sweden)

Araujo Marcos -Vinícius

2016-01-01

Full Text Available From the consumer pressure to healthier and sustainable food, and the search for quality of life, companies in various activities have reinvented to meet this demand. Organic products that have features to meet this trend, also took their place in the Brazilian wine industry, that is entered in this field to stay competitive. On the other hand, they found limiting factors that inhibiting the growth in supply of this product. In this perspective, the objective of this study is to describe and analyze what are the limiting factors for organic wine production in Brazil. To this end, an exploratory research was conducted from in-depth interviews, secondary data and direct observation. The collected data were crossed between companies and theory. The results are presented in the following chain of organic wine, based on primary resources - production - distribution - marketing and stakeholders. For conclusion, it is notable that wineries holding a major concern to maintain the certification, but the biggest challenge is to produce goodorganic grapes. On the other hand, it still requires marketing efforts, so that the product value can reach the end consumer

Let’s limit our waste production and let’s’ sort it!

CERN Multimedia

HSE Unit

2013-01-01

Let’s limit our waste production! – Why ? Preventing the production of waste is the best solution to avoid environmental issues, economic impacts and technical constraints. So, whenever you are involved in the design, manufacturing, distribution, use or dismantling of a product or an activity in general, always remember that the best waste is that which is not produced. The limitation of waste production being an HSE objective declared in 2013 by the CERN Director-General, we encourage everyone to help limit the amount of waste produced through CERN activities. Let’s sort it! – Why ? Since the 90s, CERN has implemented a policy to promote recovery of the waste* generated by its activities. Nowadays, CERN is committed to continuously improving its sorting and recovery and therefore various initiatives have been started by GS-IS to improve the recovery of waste (e.g. recovery of organic waste from restaurants; implementation of solar trash compactors - see Bulletin 27-...

21 CFR 720.4 - Information requested about cosmetic products.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 7 2010-04-01 2010-04-01 false Information requested about cosmetic products. 720... (CONTINUED) COSMETICS VOLUNTARY FILING OF COSMETIC PRODUCT INGREDIENT COMPOSITION STATEMENTS § 720.4 Information requested about cosmetic products. (a) Form FDA-2512 requests information on: (1) The name and...

Design for Limit Variability in Quality of Industrial Products: A Case ...

African Journals Online (AJOL)

The area under the normal curve of the distribution was evaluated as 0.94 falling within acceptable limit for processes in control. ... 0.76 while the probability of any sample observation being within the control limit is 0.94, showing that the process in control. Keywords: limit variability, quality of products, control limits, process

Influence of Information Product Quality on Informing Users: A Web Portal Context

OpenAIRE

Junghyun Nam

2016-01-01

Web portals have been used as information products to deliver personalized, feature-rich, and flexible information needs to Internet users. However, all portals are not equal. Most of them have relatively a small number of visitors, while a few capture the majority of surfers. This study seeks to uncover the factors that contribute the perceived quality of a general portal. Based on 21 factors derived from an extensive literature review on Information Product Quality (IPQ), web usage, and med...

Nutrient availability limits biological production in Arctic sea ice melt ponds

DEFF Research Database (Denmark)

Sørensen, Heidi Louise; Thamdrup, Bo; Jeppesen, Erik

2017-01-01

nutrient limitation in melt ponds. We also document that the addition of nutrients, although at relative high concentrations, can stimulate biological productivity at several trophic levels. Given the projected increase in first-year ice, increased melt pond coverage during the Arctic spring and potential......Every spring and summer melt ponds form at the surface of polar sea ice and become habitats where biological production may take place. Previous studies report a large variability in the productivity, but the causes are unknown. We investigated if nutrients limit the productivity in these first...... additional nutrient supply from, e.g. terrestrial sources imply that biological activity of melt ponds may become increasingly important for the sympagic carbon cycling in the future Arctic....

Possibilities and limitations for sustainable bioenergy production systems

NARCIS (Netherlands)

Smeets, E.M.W.

2008-01-01

The focus of this thesis is on the possibilities and limitations of sustainable bioenergy production systems. First, the potential contribution of bioenergy to the energy supply in different world regions in the year 2050 from different biomass sources (dedicated woody energy crops, residues and

Linear versus non-linear structural information limit in high-resolution transmission electron microscopy

International Nuclear Information System (INIS)

Van Aert, S.; Chen, J.H.; Van Dyck, D.

2010-01-01

A widely used performance criterion in high-resolution transmission electron microscopy (HRTEM) is the information limit. It corresponds to the inverse of the maximum spatial object frequency that is linearly transmitted with sufficient intensity from the exit plane of the object to the image plane and is limited due to partial temporal coherence. In practice, the information limit is often measured from a diffractogram or from Young's fringes assuming a weak phase object scattering beyond the inverse of the information limit. However, for an aberration corrected electron microscope, with an information limit in the sub-angstrom range, weak phase objects are no longer applicable since they do not scatter sufficiently in this range. Therefore, one relies on more strongly scattering objects such as crystals of heavy atoms observed along a low index zone axis. In that case, dynamical scattering becomes important such that the non-linear and linear interaction may be equally important. The non-linear interaction may then set the experimental cut-off frequency observed in a diffractogram. The goal of this paper is to quantify both the linear and the non-linear information transfer in terms of closed form analytical expressions. Whereas the cut-off frequency set by the linear transfer can be directly related with the attainable resolution, information from the non-linear transfer can only be extracted using quantitative, model-based methods. In contrast to the historic definition of the information limit depending on microscope parameters only, the expressions derived in this paper explicitly incorporate their dependence on the structure parameters as well. In order to emphasize this dependence and to distinguish from the usual information limit, the expressions derived for the inverse cut-off frequencies will be referred to as the linear and non-linear structural information limit. The present findings confirm the well-known result that partial temporal coherence has

Limiting factors in the production of deep microstructures

Science.gov (United States)

Tolfree, David W. L.; O'Neill, William; Tunna, Leslie; Sutcliffe, Christopher

1999-10-01

Microsystems increasingly require precision deep microstructures that can be cost-effectively designed and manufactured. New products must be able to meet the demands of the rapidly growing markets for microfluidic, micro- optical and micromechanical devices in industrial sectors which include chemicals, pharmaceuticals, biosciences, medicine and food. The realization of such products, first requires an effective process to design and manufacture prototypes. Two process methods used for the fabrication of high aspect-ratio microstructures are based on X-ray beam lithography with electroforming processes and direct micromachining with a frequency multiplied Nd:YAG laser using nanosecond pulse widths. Factors which limit the efficiency and precision obtainable using such processes are important parameters when deciding on the best fabrication method to use. A basic microstructure with narrow channels suitable for a microfluidic mixer have been fabricated using both these techniques and comparisons made of the limitations and suitability of the processes in respect of fast prototyping and manufacture or working devices.

Consumption risk sharing with private information and limited enforcement

Czech Academy of Sciences Publication Activity Database

Broer, T.; Kapička, Marek; Klein, P.

2017-01-01

Roč. 23, January (2017), s. 170-190 ISSN 1094-2025 Institutional support: RVO:67985998 Keywords : consumption insurance * private information * limited enforcement Subject RIV: AH - Economic s OBOR OECD: Economic Theory Impact factor: 1.053, year: 2016

The Limitations of Quantitative Social Science for Informing Public Policy

Science.gov (United States)

Jerrim, John; de Vries, Robert

2017-01-01

Quantitative social science (QSS) has the potential to make an important contribution to public policy. However it also has a number of limitations. The aim of this paper is to explain these limitations to a non-specialist audience and to identify a number of ways in which QSS research could be improved to better inform public policy.

Consumption risk sharing with private information and limited enforcement

Czech Academy of Sciences Publication Activity Database

Broer, T.; Kapička, Marek; Klein, P.

2017-01-01

Roč. 23, January (2017), s. 170-190 ISSN 1094-2025 Institutional support: Progres-Q24 Keywords : consumption insurance * private information * limited enforcement Subject RIV: AH - Economic s OBOR OECD: Economic Theory Impact factor: 1.053, year: 2016

Leveraging management information in improving call centre productivity

Directory of Open Access Journals (Sweden)

Manthisana Mosese

2016-04-01

Objectives: This research explored the use of management information and its impact on two fundamental functions namely, improving productivity without compromising the quality of service, in the call centre of a well-known South African fashion retailer, Edcon. Following the implementation of the call centre technology project the research set out to determine how Edcon can transform their call centre to improve productivity and customer service through effective utilisation of their management information. Method: Internal documents and reports were analysed to provide the basis of evaluation between the measures of productivity prior to and post the implementation of a technology project at Edcon’s call centre. Semi-structured in-depth and group interviews were conducted to establish the importance and use of management information in improving productivity and customer service. Results: The results indicated that the availability of management information has indeed contributed to improved efficiency at the Edcon call centre. Although literature claims that there is a correlation between a call centre technology upgrade and improvement in performance, evident in the return on investment being realised within a year or two of implementation, it fell beyond the scope of this study to investigate the return on investment for Edcon’s call centre. Conclusion: Although Edcon has begun realising benefits in improved productivity in their call centre from their available management information, information will continue to play a crucial role in supporting management with informed decisions that will improve the call centre operations. [pdf to follow

Understanding the limit order book: Conditioning on trade informativeness

OpenAIRE

Beltran, Héléna; Grammig, Joachim; Menkveld, Albert J.

2005-01-01

Electronic limit order books are ubiquitous in markets today. However, theoretical models for limit order markets fail to explain the real world data well. Sandas (2001) tests the classic Glosten (1994) model for order book equilibrium and rejects it. We reconfirm this result for one of the largest European stock markets. We then relax one of the model's assumptions and allow the informational content of trades to change over time. Adapting Hasbrouck's (1991a,b) methodology to estimate time v...

Thermodynamic limits to information harvesting by sensory systems

International Nuclear Information System (INIS)

Bo, Stefano; Giudice, Marco Del; Celani, Antonio

2015-01-01

In view of the relation between information and thermodynamics we investigate how much information about an external protocol can be stored in the memory of a stochastic measurement device given an energy budget. We consider a layered device with a memory component storing information about the external environment by monitoring the history of a sensory part coupled to the environment. We derive an integral fluctuation theorem for the entropy production and a measure of the information accumulated in the memory device. Its most immediate consequence is that the amount of information is bounded by the average thermodynamic entropy produced by the process. At equilibrium no entropy is produced and therefore the memory device does not add any information about the environment to the sensory component. Consequently, if the system operates at equilibrium the addition of a memory component is superfluous. Such a device can be used to model the sensing process of a cell measuring the external concentration of a chemical compound and encoding the measurement in the amount of phosphorylated cytoplasmic proteins. (paper)

17 CFR 160.12 - Limits on sharing account number information for marketing purposes.

Science.gov (United States)

2010-04-01

....12 Limits on sharing account number information for marketing purposes. (a) General prohibition on... 17 Commodity and Securities Exchanges 1 2010-04-01 2010-04-01 false Limits on sharing account number information for marketing purposes. 160.12 Section 160.12 Commodity and Securities Exchanges...

Entropy production of a Brownian ellipsoid in the overdamped limit.

Science.gov (United States)

Marino, Raffaele; Eichhorn, Ralf; Aurell, Erik

2016-01-01

We analyze the translational and rotational motion of an ellipsoidal Brownian particle from the viewpoint of stochastic thermodynamics. The particle's Brownian motion is driven by external forces and torques and takes place in an heterogeneous thermal environment where friction coefficients and (local) temperature depend on space and time. Our analysis of the particle's stochastic thermodynamics is based on the entropy production associated with single particle trajectories. It is motivated by the recent discovery that the overdamped limit of vanishing inertia effects (as compared to viscous fricion) produces a so-called "anomalous" contribution to the entropy production, which has no counterpart in the overdamped approximation, when inertia effects are simply discarded. Here we show that rotational Brownian motion in the overdamped limit generates an additional contribution to the "anomalous" entropy. We calculate its specific form by performing a systematic singular perturbation analysis for the generating function of the entropy production. As a side result, we also obtain the (well-known) equations of motion in the overdamped limit. We furthermore investigate the effects of particle shape and give explicit expressions of the "anomalous entropy" for prolate and oblate spheroids and for near-spherical Brownian particles.

Factors limiting heterotrophic bacterial production in the southern Pacific Ocean

Directory of Open Access Journals (Sweden)

F. Van Wambeke

2008-05-01

Full Text Available The role of potential factors limiting bacterial growth was investigated along vertical and longitudinal gradients across the South Eastern Pacific Gyre. The effects of glucose, nitrate, ammonium and phosphate additions on heterotrophic bacterial production (using leucine technique were studied in parallel in unfiltered seawater samples incubated under natural daily irradiance. The enrichments realized on the subsurface showed three types of responses. From 141° W (Marquesas plateau to approx 125° W, bacteria were not bottom-up controlled, as confirmed by the huge potential of growth in non-enriched seawater (median of enhancement factor×39 in 24 h. Within the Gyre (125° W–95° W, nitrogen alone stimulated leucine incorporation rates (median×4.2, but rapidly labile carbon (glucose became a second limiting factor (median×37 when the two elements were added. Finally from the border of the gyre to the Chilean upwelling (95° W–73° W, labile carbon was the only factor stimulating heterotrophic bacterial production. Interaction between phytoplankton and heterotrophic bacterial communities and the direct versus indirect effect of iron and macronutrients on bacterial production were also investigated in four selected sites: two sites on the vicinity of the Marquesas plateau, the centre of the gyre and the Eastern border of the gyre. Both phytoplankton and heterotrophic bacteria were limited by availability of nitrogen within the gyre, but not by iron. Iron limited phytoplankton at Marquesas plateau and at the eastern border of the gyre. However 48 h enrichment experiments were not sufficient to show any clear limitation of heterotrophic bacteria within Marquesas plateau and showed a limitation of these organisms by labile carbon in the eastern border of the Gyre.

Limiting the usage of blood products in cardiovascular surgery.

Science.gov (United States)

Horowitz, P E; Lorenzen, C M; Rhydderch, R D

1991-03-01

We studied the effect of the initiation of a five part program of blood component conservation on blood product utilization in patients undergoing major cardiovascular surgery. We encouraged physicians and nurses to adhere to a set of guidelines that would limit the exposure of these patients to complications associated with blood product administration. Through this effort the amounts of packed red cells, fresh frozen plasma, platelets, and cryoprecipitate used were markedly reduced. After the start of the conservation program, overall blood product usage was reduced 29% despite a 46% increase in the surgical caseload, and there was a 53% decrease in the amount of donor exposure (units of individual blood products administered) per patient.

17 CFR 248.11 - Limits on redisclosure and reuse of information.

Science.gov (United States)

2010-04-01

... Safeguarding Personal Information Limits on Disclosures § 248.11 Limits on redisclosure and reuse of... customer list from a nonaffiliated financial institution in order to provide account-processing services.... (2) Example. If you obtain a customer list from a nonaffiliated financial institution outside of the...

Information, Technology and Information Worker Productivity: Task Level Evidence

OpenAIRE

Sinan Aral; Erik Brynjolfsson; Marshall Van Alstyne

2007-01-01

In an effort to reveal the fine-grained relationships between IT use, patterns of information flows, and individual information-worker productivity, we study task level practices at a midsize executive recruiting firm. We analyze both project-level and individual-level performance using: (1) detailed accounting data on revenues, compensation, project completion rates, and team membership for over 1300 projects spanning 5 years, (2) direct observation of over 125,000 email messages over a peri...

Impact of phosphate limitation on PHA production in a feast-famine process.

Science.gov (United States)

Korkakaki, Emmanouela; van Loosdrecht, Mark C M; Kleerebezem, Robbert

2017-12-01

Double-limitation systems have shown to induce polyhydroxyalkanoates (PHA) production in chemostat studies limited in e.g. carbon and phosphate. In this work the impact of double substrate limitation on the enrichment of a PHA producing community was studied in a sequencing batch process. Enrichments at different C/P concentration ratios in the influent were established and the effect on the PHA production capacity and the enrichment community structure was investigated. Experimental results demonstrated that when a double substrate limitation is imposed at a C/P ratio in the influent in a range of 150 (C-mol/mol), the P-content of the biomass and the specific substrate uptake rates decreased. Nonetheless, the PHA storage capacity remained high (with a maximum of 84 wt%). At a C/P ratio of 300, competition in the microbial community is based on phosphate uptake, and the PHA production capacity is lost. Biomass specific substrate uptake rates are a linear function of the cellular P-content, offering advantages for scaling-up the PHA production process due to lower oxygen requirements. Copyright © 2017 Elsevier Ltd. All rights reserved.

Asymptotically optimal production policies in dynamic stochastic jobshops with limited buffers

Science.gov (United States)

Hou, Yumei; Sethi, Suresh P.; Zhang, Hanqin; Zhang, Qing

2006-05-01

We consider a production planning problem for a jobshop with unreliable machines producing a number of products. There are upper and lower bounds on intermediate parts and an upper bound on finished parts. The machine capacities are modelled as finite state Markov chains. The objective is to choose the rate of production so as to minimize the total discounted cost of inventory and production. Finding an optimal control policy for this problem is difficult. Instead, we derive an asymptotic approximation by letting the rates of change of the machine states approach infinity. The asymptotic analysis leads to a limiting problem in which the stochastic machine capacities are replaced by their equilibrium mean capacities. The value function for the original problem is shown to converge to the value function of the limiting problem. The convergence rate of the value function together with the error estimate for the constructed asymptotic optimal production policies are established.

The make or buy debate: Considering the limitations of domestic production in Tanzania

Directory of Open Access Journals (Sweden)

Wilson Kinsley

2012-06-01

Full Text Available Abstract Background In order to ensure their population’s regular access to essential medicines, many least developed countries and developing countries are faced with the policy question of whether to import or manufacture drugs locally, in particular for life-saving antiretroviral medicines for HIV/AIDS patients. In order for domestic manufacturing to be viable and cost-effective, the local industry must be able to compete with international suppliers of medicines by producing sufficiently low cost ARVs. Methods This paper considers the ‘make-or-buy’ dilemma by using Tanzania as a case study. Key informant interviews, event-driven observation, and purposive sampling of documents were used to evaluate the case study. The case study focused on Tanzania’s imitation technology transfer agreement to locally manufacture a first-line ARV (3TC + d4T + NVP, reverse engineering the ARV. Results Tanzania is limited by weak political support for the use of TRIPS flexibilities, limited production capacity for ARVs and limited competitiveness in both domestic and regional markets. The Ministry of Health and Social Welfare encourages the use of flexibilities while others push for increased IP protection. Insufficient production capacity and lack of access to donor-financed tenders make it difficult to obtain economies of scale and provide competitive prices. Conclusions Within the “make-or-buy” context, it was determined that there are significant limitations in domestic manufacturing for developing countries. The case study highlights the difficulty of governments to make use of economies of scale and produce low-cost medicines, attract technology transfer, and utilize the flexibilities of the WTO Agreement on Trade-Related Aspects of Intellectual Property Rights (TRIPS. The results demonstrate the importance of evaluating barriers to the use of TRIPS flexibilities and long-term planning across sectors in future technology transfer and

The make or buy debate: considering the limitations of domestic production in Tanzania.

Science.gov (United States)

Wilson, Kinsley Rose; Kohler, Jillian Clare; Ovtcharenko, Natalia

2012-06-29

In order to ensure their population's regular access to essential medicines, many least developed countries and developing countries are faced with the policy question of whether to import or manufacture drugs locally, in particular for life-saving antiretroviral medicines for HIV/AIDS patients. In order for domestic manufacturing to be viable and cost-effective, the local industry must be able to compete with international suppliers of medicines by producing sufficiently low cost ARVs. This paper considers the 'make-or-buy' dilemma by using Tanzania as a case study. Key informant interviews, event-driven observation, and purposive sampling of documents were used to evaluate the case study. The case study focused on Tanzania's imitation technology transfer agreement to locally manufacture a first-line ARV (3TC + d4T + NVP), reverse engineering the ARV. Tanzania is limited by weak political support for the use of TRIPS flexibilities, limited production capacity for ARVs and limited competitiveness in both domestic and regional markets. The Ministry of Health and Social Welfare encourages the use of flexibilities while others push for increased IP protection. Insufficient production capacity and lack of access to donor-financed tenders make it difficult to obtain economies of scale and provide competitive prices. Within the "make-or-buy" context, it was determined that there are significant limitations in domestic manufacturing for developing countries. The case study highlights the difficulty of governments to make use of economies of scale and produce low-cost medicines, attract technology transfer, and utilize the flexibilities of the WTO Agreement on Trade-Related Aspects of Intellectual Property Rights (TRIPS). The results demonstrate the importance of evaluating barriers to the use of TRIPS flexibilities and long-term planning across sectors in future technology transfer and manufacturing initiatives.

Limitation of productivity by trace metals in the sea

International Nuclear Information System (INIS)

Morel, F.M.M.; Price, N.M.; Hudson, R.J.M.

1991-01-01

Some trace metals such as Fe, Ni, Cu, and Zn are essential for the growth of phytoplankton. The concentrations of these essential trace elements in seawater are so low as to limit their availability to aquatic microbiota. Trace element uptake is ultimately limited by kinetics of reaction with transport ligands or by diffusion to the cell. From what the authors know of the characteristics of the uptake systems of phytoplankton and their trace metal requirements they can estimate that Fe and Zn may at some times in some place limit phytoplankton productivity, which is in accord with available field data on trace metal enrichments

Explicit Versus Implicit "Halal" Information: Influence of the Halal Label and the Country-of-Origin Information on Product Perceptions in Indonesia.

Science.gov (United States)

Maison, Dominika; Marchlewska, Marta; Syarifah, Dewi; Zein, Rizqy A; Purba, Herison P

2018-01-01

Halal refers to what is permissible in traditional Islamic law. Food that meets halal requirements is marked by a halal label on the packaging and should be especially attractive to those Muslims who follow the set of dietary laws outlined in the Quran. This research examines the role of the halal label (explicit cue) and the country-of-origin (COO) (implicit cue) in predicting positive product perceptions among Muslim consumers. We hypothesized that when an explicit sign of "halalness" (i.e., halal label) relating to a particular product is accompanied by an implicit sign of anti - "halalness" (i.e., non-Islamic COO information), Muslim consumers who pay attention to the dietary laws of Islam would have negative perceptions of such a product. We tested our assumptions in an experiment conducted among Indonesian participants who declared themselves as Muslims ( n = 444). We manipulated: (a) exposure to the halal label, and (b) the COO information. Religion-based purchase behavior was measured as a moderator variable. Positive product perceptions were measured as a dependent variable. The results showed that the halal label itself had limited influence on product perceptions. However, we found that positive product perceptions significantly decreased among people who were high in religion-based purchase behavior in response to exposure to non-Islamic COO information accompanied by a halal label. In conclusion, people who are high (vs. low) in religion-based purchase behavior do not seem to trust halal-labeled food produced in a country with other than an Islamic tradition.

Aggravated phosphorus limitation on biomass production under increasing nitrogen loading: a meta-analysis.

Science.gov (United States)

Li, Yong; Niu, Shuli; Yu, Guirui

2016-02-01

Nitrogen (N) and phosphorus (P), either individually or in combination, have been demonstrated to limit biomass production in terrestrial ecosystems. Field studies have been extensively synthesized to assess global patterns of N impacts on terrestrial ecosystem processes. However, to our knowledge, no synthesis has been done so far to reveal global patterns of P impacts on terrestrial ecosystems, especially under different nitrogen (N) levels. Here, we conducted a meta-analysis of impacts of P addition, either alone or with N addition, on aboveground (AGB) and belowground biomass production (BGB), plant and soil P concentrations, and N : P ratio in terrestrial ecosystems. Overall, our meta-analysis quantitatively confirmed existing notions: (i) colimitation of N and P on biomass production and (ii) more P limitation in tropical forest than other ecosystems. More importantly, our analysis revealed new findings: (i) P limitation on biomass production was aggravated by N enrichment and (ii) plant P concentration was a better indicator of P limitation than soil P availability. Specifically, P addition increased AGB and BGB by 34% and 13%, respectively. The effect size of P addition on biomass production was larger in tropical forest than grassland, wetland, and tundra and varied with P fertilizer forms, P addition rates, or experimental durations. The P-induced increase in biomass production and plant P concentration was larger under elevated than ambient N. Our findings suggest that the global limitation of P on biomass production will become severer under increasing N fertilizer and deposition in the future. © 2015 John Wiley & Sons Ltd.

Dynamic Speed Adaptation for Path Tracking Based on Curvature Information and Speed Limits.

Science.gov (United States)

Gámez Serna, Citlalli; Ruichek, Yassine

2017-06-14

A critical concern of autonomous vehicles is safety. Different approaches have tried to enhance driving safety to reduce the number of fatal crashes and severe injuries. As an example, Intelligent Speed Adaptation (ISA) systems warn the driver when the vehicle exceeds the recommended speed limit. However, these systems only take into account fixed speed limits without considering factors like road geometry. In this paper, we consider road curvature with speed limits to automatically adjust vehicle's speed with the ideal one through our proposed Dynamic Speed Adaptation (DSA) method. Furthermore, 'curve analysis extraction' and 'speed limits database creation' are also part of our contribution. An algorithm that analyzes GPS information off-line identifies high curvature segments and estimates the speed for each curve. The speed limit database contains information about the different speed limit zones for each traveled path. Our DSA senses speed limits and curves of the road using GPS information and ensures smooth speed transitions between current and ideal speeds. Through experimental simulations with different control algorithms on real and simulated datasets, we prove that our method is able to significantly reduce lateral errors on sharp curves, to respect speed limits and consequently increase safety and comfort for the passenger.

Understanding the medicines information-seeking behaviour and information needs of South African long-term patients with limited literacy skills.

Science.gov (United States)

Patel, Sonal; Dowse, Ros

2015-10-01

Although much health information-seeking behaviour (HISB) research has been reported in patients with good literacy skills, little is known about HISB in patients with limited literacy skills served by under-resourced health-care systems. To investigate medicine information-seeking behaviour and information needs in patients with limited literacy. Using a question guide, four focus group discussions (FGDs) were conducted to explore themes related to information needs, information-seeking practices and awareness of and ability to utilize information sources. Twenty-two isiXhosa-speaking long-term patients with limited formal education were recruited from a primary health-care clinic in South Africa. Discussions were audio-recorded and transcribed verbatim. NVivo(®) was used for initial coding of transcripts. Codes were analysed, and potential themes and subthemes in the entire data set were identified and refined. The results of this study reflect a passive, disempowered patient. Poor awareness of information sources, lack of health-related knowledge and stigma contributed to a lack of information-seeking practice, thus potentially adversely influencing patient-provider interactions. Patients neither asked questions nor were encouraged to ask questions. All expressed an unmet need for information and a desire for receiving the illustrated written medicines-related information displayed in the FGDs. The main sources of information were health-care professionals, followed by family and friends. The significant level of patient disempowerment and passivity reported amongst patients underpinned their inability to actively seek information. Neither sources of information nor types of appropriate medicines information could be identified. Unmet information needs and a desire for information were reported. © 2013 John Wiley & Sons Ltd.

Health motivation and product design determine consumers' visual attention to nutrition information on food products.

Science.gov (United States)

Visschers, Vivianne H M; Hess, Rebecca; Siegrist, Michael

2010-07-01

In the present study we investigated consumers' visual attention to nutrition information on food products using an indirect instrument, an eye tracker. In addition, we looked at whether people with a health motivation focus on nutrition information on food products more than people with a taste motivation. Respondents were instructed to choose one of five cereals for either the kindergarten (health motivation) or the student cafeteria (taste motivation). The eye tracker measured their visual attention during this task. Then respondents completed a short questionnaire. Laboratory of the ETH Zurich, Switzerland. Videos and questionnaires from thirty-two students (seventeen males; mean age 24.91 years) were analysed. Respondents with a health motivation viewed the nutrition information on the food products for longer and more often than respondents with a taste motivation. Health motivation also seemed to stimulate deeper processing of the nutrition information. The student cafeteria group focused primarily on the other information and did this for longer and more often than the health motivation group. Additionally, the package design affected participants' nutrition information search. Two factors appear to influence whether people pay attention to nutrition information on food products: their motivation and the product's design. If the package design does not sufficiently facilitate the localization of nutrition information, health motivation can stimulate consumers to look for nutrition information so that they may make a more deliberate food choice.

Nutrient and Light Limitations on Grass Productivity in a Southern African Savanna

Science.gov (United States)

Ries, L. P.; Shugart, H. H.; Caylor, K. K.; Okin, G. S.; Kgope, B.

2006-12-01

Despite the ubiquity of sub-tropical savannas throughout the earth, limitations of savanna productivity are understudied relative to other terrestrial systems. In particular, there has been little attention on the role of phosphorus (P) in savanna productivity and structure. This study examined the role of increased nitrogen (N) and P in grass productivity in a woodland savanna in Botswana. We added aqueous forms of N and P individually and together to selected grasses. During the following growing season we measured foliar nutrient concentrations, aboveground biomass productivity and photosynthetic response at various levels of incident photosynthetically active radiation to estimate the productivity response. As expected, we observed an increase in foliar P concentrations in P and N+P treatments. However, there was no increase in foliar N for any treatments. We also observed a significant increase in net carbon assimilation and Amax for all treatments relative to the control grasses. Despite a higher rate of leaf level carbon assimilation in the N treatment, the aboveground biomass production was smaller than that of the N+P treatment. These results suggest that the aboveground productivity of these woodland savanna grasses is limited by both N and P. Additionally, under constant CO2 availability, photosynthesis appears to be limited by nutrients for light levels greater than 500 μmol m-2s-1. This research will help broaden our understanding of the biogeochemical processes that govern savanna productivity. Ultimately, these data can be used to model canopy productivity and ecological succession of savannas under scenarios in which bush encroachment and desertification may alter light and nutrients availability.

Information Is Not a Virus, and Other Consequences of Human Cognitive Limits

Directory of Open Access Journals (Sweden)

Kristina Lerman

2016-05-01

Full Text Available The many decisions that people make about what to pay attention to online shape the spread of information in online social networks. Due to the constraints of available time and cognitive resources, the ease of discovery strongly impacts how people allocate their attention to social media content. As a consequence, the position of information in an individual’s social feed, as well as explicit social signals about its popularity, determine whether it will be seen, and the likelihood that it will be shared with followers. Accounting for these cognitive limits simplifies mechanics of information diffusion in online social networks and explains puzzling empirical observations: (i information generally fails to spread in social media and (ii highly connected people are less likely to re-share information. Studies of information diffusion on different social media platforms reviewed here suggest that the interplay between human cognitive limits and network structure differentiates the spread of information from other social contagions, such as the spread of a virus through a population.

Information delivery manuals to integrate building product information into design

DEFF Research Database (Denmark)

Berard, Ole Bengt; Karlshøj, Jan

2011-01-01

Despite continuing BIM progress, professionals in the AEC industry often lack the information they need to perform their work. Although this problem could be alleviated by information systems similar to those in other industries, companies struggle to model processes and information needs...... them in information systems. BIM implies that objects are bearers of information and logic. The present study has three main aims: (1) to explore IDMs capability to capture all four perspectives, (2) to determine whether an IDM’s collaborative methodology is valid for developing standardized processes......, and (3) to ascertain whether IDM’s business rules can support the development of information and logic-bearing BIM objects. The research is based on a case study of re-engineering the bidding process for a design-build project to integrate building product manufacturers, subcontractors...

77 FR 50963 - Modification of Regulations Regarding the Definition of Factual Information and Time Limits for...

Science.gov (United States)

2012-08-23

... Modification of Regulations Regarding the Definition of Factual Information and Time Limits for Submission of... proposed modification to the definition of factual information and to the time limits for the submission of... modification to the definition of factual information and to the time limits for the submission of factual...

Explicit Versus Implicit “Halal” Information: Influence of the Halal Label and the Country-of-Origin Information on Product Perceptions in Indonesia

Directory of Open Access Journals (Sweden)

Dominika Maison

2018-03-01

Full Text Available Halal refers to what is permissible in traditional Islamic law. Food that meets halal requirements is marked by a halal label on the packaging and should be especially attractive to those Muslims who follow the set of dietary laws outlined in the Quran. This research examines the role of the halal label (explicit cue and the country-of-origin (COO (implicit cue in predicting positive product perceptions among Muslim consumers. We hypothesized that when an explicit sign of “halalness” (i.e., halal label relating to a particular product is accompanied by an implicit sign of anti-“halalness” (i.e., non-Islamic COO information, Muslim consumers who pay attention to the dietary laws of Islam would have negative perceptions of such a product. We tested our assumptions in an experiment conducted among Indonesian participants who declared themselves as Muslims (n = 444. We manipulated: (a exposure to the halal label, and (b the COO information. Religion-based purchase behavior was measured as a moderator variable. Positive product perceptions were measured as a dependent variable. The results showed that the halal label itself had limited influence on product perceptions. However, we found that positive product perceptions significantly decreased among people who were high in religion-based purchase behavior in response to exposure to non-Islamic COO information accompanied by a halal label. In conclusion, people who are high (vs. low in religion-based purchase behavior do not seem to trust halal-labeled food produced in a country with other than an Islamic tradition.

Explicit Versus Implicit “Halal” Information: Influence of the Halal Label and the Country-of-Origin Information on Product Perceptions in Indonesia

Science.gov (United States)

Maison, Dominika; Marchlewska, Marta; Syarifah, Dewi; Zein, Rizqy A.; Purba, Herison P.

2018-01-01

Halal refers to what is permissible in traditional Islamic law. Food that meets halal requirements is marked by a halal label on the packaging and should be especially attractive to those Muslims who follow the set of dietary laws outlined in the Quran. This research examines the role of the halal label (explicit cue) and the country-of-origin (COO) (implicit cue) in predicting positive product perceptions among Muslim consumers. We hypothesized that when an explicit sign of “halalness” (i.e., halal label) relating to a particular product is accompanied by an implicit sign of anti-“halalness” (i.e., non-Islamic COO information), Muslim consumers who pay attention to the dietary laws of Islam would have negative perceptions of such a product. We tested our assumptions in an experiment conducted among Indonesian participants who declared themselves as Muslims (n = 444). We manipulated: (a) exposure to the halal label, and (b) the COO information. Religion-based purchase behavior was measured as a moderator variable. Positive product perceptions were measured as a dependent variable. The results showed that the halal label itself had limited influence on product perceptions. However, we found that positive product perceptions significantly decreased among people who were high in religion-based purchase behavior in response to exposure to non-Islamic COO information accompanied by a halal label. In conclusion, people who are high (vs. low) in religion-based purchase behavior do not seem to trust halal-labeled food produced in a country with other than an Islamic tradition. PMID:29623061

12 CFR 40.11 - Limits on redisclosure and reuse of information.

Science.gov (United States)

2010-01-01

... own marketing purposes. (b)(1) Information a bank receives outside of an exception. If a bank receives... 12 Banks and Banking 1 2010-01-01 2010-01-01 false Limits on redisclosure and reuse of information. 40.11 Section 40.11 Banks and Banking COMPTROLLER OF THE CURRENCY, DEPARTMENT OF THE TREASURY PRIVACY...

An Effective Approach to Biomedical Information Extraction with Limited Training Data

Science.gov (United States)

Jonnalagadda, Siddhartha

2011-01-01

In the current millennium, extensive use of computers and the internet caused an exponential increase in information. Few research areas are as important as information extraction, which primarily involves extracting concepts and the relations between them from free text. Limitations in the size of training data, lack of lexicons and lack of…

Product diffusion through on-demand information-seeking behaviour.

Science.gov (United States)

Riedl, Christoph; Bjelland, Johannes; Canright, Geoffrey; Iqbal, Asif; Engø-Monsen, Kenth; Qureshi, Taimur; Sundsøy, Pål Roe; Lazer, David

2018-02-01

Most models of product adoption predict S-shaped adoption curves. Here we report results from two country-scale experiments in which we find linear adoption curves. We show evidence that the observed linear pattern is the result of active information-seeking behaviour: individuals actively pulling information from several central sources facilitated by modern Internet searches. Thus, a constant baseline rate of interest sustains product diffusion, resulting in a linear diffusion process instead of the S-shaped curve of adoption predicted by many diffusion models. The main experiment seeded 70 000 (48 000 in Experiment 2) unique voucher codes for the same product with randomly sampled nodes in a social network of approximately 43 million individuals with about 567 million ties. We find that the experiment reached over 800 000 individuals with 80% of adopters adopting the same product-a winner-take-all dynamic consistent with search engine driven rankings that would not have emerged had the products spread only through a network of social contacts. We provide evidence for (and characterization of) this diffusion process driven by active information-seeking behaviour through analyses investigating (a) patterns of geographical spreading; (b) the branching process; and (c) diffusion heterogeneity. Using data on adopters' geolocation we show that social spreading is highly localized, while on-demand diffusion is geographically independent. We also show that cascades started by individuals who actively pull information from central sources are more effective at spreading the product among their peers. © 2018 The Authors.

Applying the evaluability principle to nutrition table information. How reference information changes people's perception of food products.

Science.gov (United States)

Visschers, Vivianne H M; Siegrist, Michael

2009-04-01

Consumers often neglect or misinterpret nutrition table information. We argue in this paper that this can be explained by the evaluability principle, which posits that people's evaluation of a product corresponds to a greater degree with the product's actual value when people receive reference information about the product than when they do not get this information. We tested this assumption concerning nutrition table information in two studies. In Study 1, respondents received one of six nutrition tables that differed on reference and summary information about either yogurt or chocolate. In the second study, we compared three nutrition tables from the previous study, as applied to either a low nutritional value yogurt or a high nutritional value yogurt. Participants were asked to rate the attractiveness and perceived healthiness of the product in both studies. Results indicated that reference information can change people's product perception. This seems to depend, however, on the product's nutritional value and on people's primary connotation for the product. In sum, the evaluability principle can explain people's perception of a food product. A nutrition table that is adapted to this principle appears to influence people's product perception so that it becomes more in line with its nutritional value. Implications for practice and further research are given.

Reliability of dynamic systems under limited information.

Energy Technology Data Exchange (ETDEWEB)

Field, Richard V., Jr. (.,; .); Grigoriu, Mircea

2006-09-01

A method is developed for reliability analysis of dynamic systems under limited information. The available information includes one or more samples of the system output; any known information on features of the output can be used if available. The method is based on the theory of non-Gaussian translation processes and is shown to be particularly suitable for problems of practical interest. For illustration, we apply the proposed method to a series of simple example problems and compare with results given by traditional statistical estimators in order to establish the accuracy of the method. It is demonstrated that the method delivers accurate results for the case of linear and nonlinear dynamic systems, and can be applied to analyze experimental data and/or mathematical model outputs. Two complex applications of direct interest to Sandia are also considered. First, we apply the proposed method to assess design reliability of a MEMS inertial switch. Second, we consider re-entry body (RB) component vibration response during normal re-entry, where the objective is to estimate the time-dependent probability of component failure. This last application is directly relevant to re-entry random vibration analysis at Sandia, and may provide insights on test-based and/or model-based qualification of weapon components for random vibration environments.

A survey of major constraints limiting commercial poultry production ...

African Journals Online (AJOL)

In a survey of major constraints limiting commercial poultry production in Gombe metropolis, 2,121 poultry cases were presented at the Gombe State Veterinary Clinic between January 1995 and December 2004. Out of the total number of cases presented, Newcastle disease (ND) accounted for 14.66%, chronic respiratory ...

Information strategy and information products in radiation protection. A Norwegian RISKPERCOM study

Energy Technology Data Exchange (ETDEWEB)

Reitan, J B; Toennesen, A [Statens Straalevern, Oesteraas (Norway); Waldahl, R [Avdeling for media og kommunikasjon, Oslo Univ., Oslo (Norway)

1998-02-01

A short description of the national background for the radiation issue is presented together with a presentation of information strategy and analysis of the information products of the Norwegian Radiation Protection Authority. This is part of an international study. 35 refs.

Information strategy and information products in radiation protection. A Norwegian RISKPERCOM study

International Nuclear Information System (INIS)

Reitan, J.B.; Toennesen, A.; Waldahl, R.

1998-02-01

A short description of the national background for the radiation issue is presented together with a presentation of information strategy and analysis of the information products of the Norwegian Radiation Protection Authority. This is part of an international study. 35 refs

Method s for Measuring Productivity in Libraries and Information Centres

Directory of Open Access Journals (Sweden)

Mohammad Alaaei

2009-04-01

Full Text Available   Within Information centers, productivity is the result of optimal and effective use of information resources, service quality improvement, increased user satisfaction, pleasantness of working environment, increased motivation and enthusiasm of staff to work better. All contribute to the growth and development of information centers. Thus these centers would need to be familiar with methods employed in productivity measurement. Productivity is one of the criteria for evaluating system performance. In the past decades particular emphasis has been placed on measurement and improvement of human resource, creativity, innovation and expert analysis. Contemplation and efforts made towards identification of problems and issues and new means to make more useful and better resource management is the very definition of productivity. Simply put, productivity is the relationship between system output and the elements garnered to produce these outputs. The causality between variables and factors impacting on productivity is very complex. In information centers, given the large volume of elements involved, it seems necessary to increase efficiency and productivity

Customized products and cloud service information system development research

Directory of Open Access Journals (Sweden)

Hung Chien-Wen

2017-01-01

Full Text Available This study presents a cloud service customized product information system to enable businesses to provide customized product marketing on the Internet to meet consumer demand for customized products. The cloud service of the information system development strategic framework proposed in this study contains three elements: (1 e-commerce services, (2 promotion type modules, and (3 cloud services customized promotional products. In this study, a mining cloud information system to detect customer behavior is proposed. The association rules from relational database design are utilized to mine consumer behavior to generate cross-selling proposals for customer products and marketing for a retailing mall in Taiwan. The study is composed of several parts, as follows. A market segment and application of association rules in data exploration techniques (Association Rule Mining and sequence-like exploration (Sequential Pattern Mining, efficient analysis of customers, consumer behavior, identification of candidates for promotional products, and using cloud service delivery and evaluation of targets to evaluate candidates for promotional products for production. However, in addition to cloud service customized promotional products, the quantity of promotional products sales varies for different customers. We strive to achieve increased customer loyalty and profits through the use of active cloud service customized promotional products.

3rd International Symposium on Innovative Management, Information and Production

CERN Document Server

Xu, Bing; Wu, Berlin

2014-01-01

Innovative Management in Information and Production is based on the proceedings of the Third International Symposium on Innovative Managemet, Information and Production. This symposium is held by International Society of Management Engineers. The symposium took place on October 8-10, in Ho Chi Minh City, Vietnam. This book examines recent innovative management of information and productions such as digital collection management and operations planning, scheduling and control.

Design to Robotic Production for Informed Materialization Processes

Directory of Open Access Journals (Sweden)

Sina Mostafavi

2017-12-01

Full Text Available Design to Robotic Production (D2RP establishes links between digital design and production in order to achieve informed materialization at an architectural scale. D2RP research is being discussed under the computation, automation and materialization themes, by reference to customizable digital design means, robotic fabrication setups and informed materialization strategies implemented by the Robotic Building group at Hyperbody, TU Delft.

A Practical Approach for Parameter Identification with Limited Information

DEFF Research Database (Denmark)

Zeni, Lorenzo; Yang, Guangya; Tarnowski, Germán Claudio

2014-01-01

A practical parameter estimation procedure for a real excitation system is reported in this paper. The core algorithm is based on genetic algorithm (GA) which estimates the parameters of a real AC brushless excitation system with limited information about the system. Practical considerations are ...... parameters. The whole methodology is described and the estimation strategy is presented in this paper....

Modelling the bioconversion of cellulose into microbial products: rate limitations

Energy Technology Data Exchange (ETDEWEB)

Asenjo, J A

1984-12-01

The direct bioconversion of cellulose into microbial products carried out as a simultaneous saccharification and fermentation has a strong effect on the rates of cellulose degradation because cellobiose and glucose inhibition of the reaction are circumvented. A general mathematical model of the kinetics of this bioconversion has been developed. Its use in representing aerobic systems and in the analysis of the kinetic limitations has been investigated. Simulations have been carried out to find the rate limiting steps in slow fermentations and in rapid ones as determined by the specific rate of product formation. The requirements for solubilising and depolymerising enzyme activities (cellulase and cellobiase) in these systems has been determined. The activity that have been obtained for fungal cellulases are adequate for the kinetic requirements of the fastest fermentative strains. The results also show that for simultaneous bioconversions where strong cellobiose and glucose inhibition is overcome, no additional cellobiase is necessary to increase the rate of product formation. These results are useful for the selection of cellolytic micro-organisms and in the determination of enzymes to be cloned in recombinant strains. 17 references.

Product Knowledge and Product Involvement as Moderators of the Effects of Information on Purchase Decisions: A Case Study Using the Perfect Information Frontier Approach.

Science.gov (United States)

Bei, Lien-Ti; Widdows, Richard

1999-01-01

Using a 2x2x2 factorial design, data from 282 respondents illustrate that people with more product knowledge ("experts") are more likely to be persuaded by complex than simple product information. "Novices" reacted similarly to simple and complex information. The type of information provided influences purchasing decisions. (SK)

"Legal highs" on the net-Evaluation of UK-based Websites, products and product information.

Science.gov (United States)

Schmidt, Martin M; Sharma, Akhilesh; Schifano, Fabrizio; Feinmann, Charlotte

2011-03-20

A vast array of substances are marketed as "legal highs" in the UK. These products are mainly marketed online and are packaged and produced to mimic illicit drugs. Little is known about the full range of products available at present and no studies have evaluated the product information provided to consumers. AIMS & HYPOTHESIS: To describe the available legal high products marketed by UK-based Internet retailers and evaluate the product information provided to consumers. Websites were identified using the terms "buy legal highs+UK" and two search engines. The first 100 hits and a random sample of 5% of the remaining results were screened. Websites based in the UK were included and all products were entered on a database. Information on product name, list price, claimed effects, side effects, contraindications and interactions was extracted. A descriptive analysis was conducted using SPSS v14. 115 Websites met the inclusion criteria but due to duplicate listings this was reduced to 39 unique Websites. 1308 products were found and evaluated. The average product price was 9.69 British pounds. Products took the form of pills (46.6%), smoking material (29.7%) and single plant material/extract (18.1%). Most products claimed to be stimulants (41.7%), sedatives (32.3%), or hallucinogens (12.9%). 40.1% of products failed to list ingredients, 91.9% failed to list side effects, 81.9% failed to list contraindications and 86.3% failed to list drug interactions. Top 5 products (with active ingredients in brackets) by frequency were Salvia divinorum (Salivinorin A), Kratom (Mitragynine), Hawaiian Baby Woodrose Seeds (Lysergic Acid Amide), Fly Agaric (Ibotenic Acid, Muscimol) and Genie (JWH018, CP47497). Products marketed as "legal highs" are easily available from UK-based Internet retailers and are reasonably affordable. Safety information provided to consumers is poor. Uninformed users risk serious adverse effects. Copyright © 2010 Elsevier Ireland Ltd. All rights reserved.

Method s for Measuring Productivity in Libraries and Information Centres

OpenAIRE

Mohammad Alaaei

2009-01-01

  Within Information centers, productivity is the result of optimal and effective use of information resources, service quality improvement, increased user satisfaction, pleasantness of working environment, increased motivation and enthusiasm of staff to work better. All contribute to the growth and development of information centers. Thus these centers would need to be familiar with methods employed in productivity measurement. Productivity is one of the criteria for evaluating system perfor...

77 FR 40534 - Modification of Regulations Regarding the Definition of Factual Information and Time Limits for...

Science.gov (United States)

2012-07-10

... classification of factual information than the current definition. Currently, 19 CFR 351.301 sets forth the time... definition of factual information and the time limits for the submission of factual information; (3) modifying the definition of factual information but maintaining all time limits; and, (4) modifying the...

Ensuring and Improving Information Quality for Earth Science Data and Products: Role of the ESIP Information Quality Cluster

Science.gov (United States)

Ramapriyan, Hampapuram; Peng, Ge; Moroni, David; Shie, Chung-Lin

2016-01-01

Quality of products is always of concern to users regardless of the type of products. The focus of this paper is on the quality of Earth science data products. There are four different aspects of quality - scientific, product, stewardship and service. All these aspects taken together constitute Information Quality. With increasing requirement on ensuring and improving information quality, there has been considerable work related to information quality during the last several years. Given this rich background of prior work, the Information Quality Cluster (IQC), established within the Federation of Earth Science Information Partners (ESIP) has been active with membership from multiple organizations. Its objectives and activities, aimed at ensuring and improving information quality for Earth science data and products, are discussed briefly.

Ensuring and Improving Information Quality for Earth Science Data and Products Role of the ESIP Information Quality Cluster

Science.gov (United States)

Ramapriyan, H. K. (Rama); Peng, Ge; Moroni, David; Shie, Chung-Lin

2016-01-01

Quality of products is always of concern to users regardless of the type of products. The focus of this paper is on the quality of Earth science data products. There are four different aspects of quality scientific, product, stewardship and service. All these aspects taken together constitute Information Quality. With increasing requirement on ensuring and improving information quality, there has been considerable work related to information quality during the last several years. Given this rich background of prior work, the Information Quality Cluster (IQC), established within the Federation of Earth Science Information Partners (ESIP) has been active with membership from multiple organizations. Its objectives and activities, aimed at ensuring and improving information quality for Earth science data and products, are discussed briefly.

Information Limited Oligonucleotide Amplification Assay for Affinity-Based, Parallel Detection Studies.

Directory of Open Access Journals (Sweden)

Harish Bokkasam

Full Text Available Molecular communication systems encounter similar constraints as telecommunications. In either case, channel crosstalk at the receiver end will result in information loss that statistical analysis cannot compensate. This is because in any communication channel there is a physical limit to the amount of information that can be transmitted. We present a novel and simple modified end amplification (MEA technique to generate reduced and defined amounts of specific information in form of short fragments from an oligonucleotide source that also contains unrelated and redundant information. Our method can be a valuable tool to investigate information overflow and channel capacity in biomolecular recognition systems.

Limits on the production of neutral penetrating states in a beam dump

International Nuclear Information System (INIS)

LoSecco, J.; Sulak, L.; Galik, R.; Horstkotte, J.; Knauer, J.; Williams, H.H.; Soukas, A.; Wanderer, P.; Weng, W.

1981-01-01

We present limits on the production of neutral penetrating states produced in 28 GeV proton nucleus collisions. We obtain limits for light, heavy and unstable neutral states. For light stable states our limit sigmasub(I)sigmasub(P) -69 cm 4 /nucleon 2 is more than a factor of 5.5 better than previous limits. Time of flight techniques are used to study heavy states. We have poor sensitivity to short-lived states. (orig.)

The Magical Number Seven, Plus or Minus Two: Some Limits on Our Capacity for Processing Information.

Science.gov (United States)

Miller, George A.

1994-01-01

Capacity limitations in absolute judgment tasks are discussed in relation to information theory. Information theory can provide a quantitative way of resolving questions about limitations on the amount of information we can receive and the process of recoding. (SLD)

Fisher-Renyi entropy product and information plane

International Nuclear Information System (INIS)

Romera, E.; Nagy, A.

2008-01-01

Connection between Fisher information and Renyi entropy has been established. This link allows us to define the Fisher-Renyi information plane and an entropic product in terms of these quantities. New Renyi uncertainty relations are obtained for single particle densities of many particle systems in position-momentum conjugate spaces

Mathematical analysis of the impact mechanism of information platform on agro-product supply chain and agro-product competitiveness

Directory of Open Access Journals (Sweden)

Jiang Qi-Jie

2017-04-01

Full Text Available How to optimize agro-product supply chain to promote its operating efficiency so as to enhance the competitiveness of regional agricultural products has posed a problem to academic circles, business circles and governments of various levels. One way to solve this problem is to introduce an information platform into the supply chain, which this essay focuses on. Firstly, a review of existing research findings concerning the agro-product competitiveness, agro-product supply chain (ASC and information platform was given. Secondly, we constructed a mathematical model to analyze the impact of information platform on the bullwhip effect in ASC. Thirdly, another mathematical model was constructed to help compare and analyze the impact of information platform on information acquisition of members in ASC. The research results show that the implantation of information platform can mitigate the bullwhip effect in ASC, and members can determine order amount or production more close to the actual market demand. And also the information platform can reduce the time for members in ASC to get information from other members. Besides, information platform can help ASC to alleviate information asymmetry among upstream and downstream members. Furthermore, researches about the operating mechanism and pattern, technical feature and running structure of the information platform, along with their impacts on agro-product supply chain and the competitiveness of agricultural products need to be advanced.

Mathematical analysis of the impact mechanism of information platform on agro-product supply chain and agro-product competitiveness

Science.gov (United States)

Jiang, Qi-Jie; Jin, Mao-Zhu; Ren, Pei-Yu

2017-04-01

How to optimize agro-product supply chain to promote its operating efficiency so as to enhance the competitiveness of regional agricultural products has posed a problem to academic circles, business circles and governments of various levels. One way to solve this problem is to introduce an information platform into the supply chain, which this essay focuses on. Firstly, a review of existing research findings concerning the agro-product competitiveness, agro-product supply chain (ASC) and information platform was given. Secondly, we constructed a mathematical model to analyze the impact of information platform on the bullwhip effect in ASC. Thirdly, another mathematical model was constructed to help compare and analyze the impact of information platform on information acquisition of members in ASC. The research results show that the implantation of information platform can mitigate the bullwhip effect in ASC, and members can determine order amount or production more close to the actual market demand. And also the information platform can reduce the time for members in ASC to get information from other members. Besides, information platform can help ASC to alleviate information asymmetry among upstream and downstream members. Furthermore, researches about the operating mechanism and pattern, technical feature and running structure of the information platform, along with their impacts on agro-product supply chain and the competitiveness of agricultural products need to be advanced.

Auditing Information System : Delivery Product Service

Directory of Open Access Journals (Sweden)

Purwoko Purwoko

2011-05-01

Full Text Available Purpose of the research is to ensure the securities of information system asset and to ensure if informa-tion system support the operational and data collected was valid. Research method that used in this research were library studies and field studies. Field studies such an observation, questioner, and inter-view. the expected result are founding the weakness of security management control, operational man-agement control, input control, and output control of risk happened in the company. Conclusion of this research are the system on the company work good and there’s no potential risk happened and make an impact to the delivery process of information system.Index Terms - Auditing Information system, Delivery product process.

Information and interaction Eddington, Wheeler, and the limits of knowledge

CERN Document Server

Rickles, Dean

2017-01-01

In this essay collection, leading physicists, philosophers, and historians attempt to fill the empty theoretical ground in the foundations of information and address the related question of the limits to our knowledge of the world. Over recent decades, our practical approach to information and its exploitation has radically outpaced our theoretical understanding - to such a degree that reflection on the foundations may seem futile. But it is exactly fields such as quantum information, which are shifting the boundaries of the physically possible, that make a foundational understanding of information increasingly important. One of the recurring themes of the book is the claim by Eddington and Wheeler that information involves interaction and putting agents or observers centre stage. Thus, physical reality, in their view, is shaped by the questions we choose to put to it and is built up from the information residing at its core. This is the root of Wheeler’s famous phrase “it from bit.” After reading the s...

High-energy neutrino background: Limitations on models of deuterium production

International Nuclear Information System (INIS)

Eichler, D.

1979-01-01

It is pointed out that Epstein's model for deuterium production via high-energy spallation reactions produces high-energy neutrinos in sufficient quantity to stand out above those that are produced by cosmic-ray interactions in the Earth's atmosphere. That the Reines experiment detected neutrinos of atmospheric origin without detecting any cosmic component restricts deuterium production by spallation reactions to very high redshifts (z> or approx. =300). Improved neutrino experiments may be able to push these limits back to recombination

Indirect reciprocity with negative assortment and limited information can promote cooperation.

Science.gov (United States)

Brush, Eleanor; Brännström, Åke; Dieckmann, Ulf

2018-04-14

Cooperation is ubiquitous in biological and social systems, even though cooperative behavior is often costly and at risk of exploitation by non-cooperators. Several studies have demonstrated that indirect reciprocity, whereby some members of a group observe the behaviors of their peers and use this information to discriminate against previously uncooperative agents in the future, can promote prosocial behavior. Some studies have shown that differential propensities of interacting among and between different types of agents (interaction assortment) can increase the effectiveness of indirect reciprocity. No previous studies have, however, considered differential propensities of observing the behaviors of different types of agents (information assortment). Furthermore, most previous studies have assumed that discriminators possess perfect information about others and incur no costs for gathering and storing this information. Here, we (1) consider both interaction assortment and information assortment, (2) assume discriminators have limited information about others, and (3) introduce a cost for information gathering and storage, in order to understand how the ability of discriminators to stabilize cooperation is affected by these steps toward increased realism. We report the following findings. First, cooperation can persist when agents preferentially interact with agents of other types or when discriminators preferentially observe other discriminators, even when they have limited information. Second, contrary to intuition, increasing the amount of information available to discriminators can exacerbate defection. Third, introducing costs of gathering and storing information makes it more difficult for discriminators to stabilize cooperation. Our study is one of only a few studies to date that show how negative interaction assortment can promote cooperation and broadens the set of circumstances in which it is know that cooperation can be maintained. Copyright © 2018

An information capacity limitation of visual short-term memory.

Science.gov (United States)

Sewell, David K; Lilburn, Simon D; Smith, Philip L

2014-12-01

Research suggests that visual short-term memory (VSTM) has both an item capacity, of around 4 items, and an information capacity. We characterize the information capacity limits of VSTM using a task in which observers discriminated the orientation of a single probed item in displays consisting of 1, 2, 3, or 4 orthogonally oriented Gabor patch stimuli that were presented in noise for 50 ms, 100 ms, 150 ms, or 200 ms. The observed capacity limitations are well described by a sample-size model, which predicts invariance of ∑(i)(d'(i))² for displays of different sizes and linearity of (d'(i))² for displays of different durations. Performance was the same for simultaneous and sequentially presented displays, which implicates VSTM as the locus of the observed invariance and rules out explanations that ascribe it to divided attention or stimulus encoding. The invariance of ∑(i)(d'(i))² is predicted by the competitive interaction theory of Smith and Sewell (2013), which attributes it to the normalization of VSTM traces strengths arising from competition among stimuli entering VSTM. PsycINFO Database Record (c) 2014 APA, all rights reserved.

Forecasting Aggregate Productivity using Information from Firm-level Data

NARCIS (Netherlands)

Bartelsman, E.J.; Wolf, Z.

2014-01-01

In this paper, we explore whether information from firm-level data can improve forecasts of aggregate productivity growth. We generate firm-level productivity measures and aggregate them into time-series components that capture within-firm productivity and the productivity contribution of

Oxygen transfer rate during the production of alginate by Azotobacter vinelandii under oxygen-limited and non oxygen-limited conditions

Directory of Open Access Journals (Sweden)

Peña Carlos F

2011-02-01

Full Text Available Abstract Background The oxygen transfer rate (OTR and dissolved oxygen tension (DOT play an important role in determining alginate production and its composition; however, no systematic study has been reported about the independent influence of the OTR and DOT. In this paper, we report a study about alginate production and the evolution of the molecular mass of the polymer produced by a wild-type A. vinelandii strain ATCC 9046, in terms of the maximum oxygen transfer rate (OTRmax in cultures where the dissolved oxygen tension (DOT was kept constant. Results The results revealed that in the two dissolved oxygen conditions evaluated, strictly controlled by gas blending at 0.5 and 5% DOT, an increase in the agitation rate (from 300 to 700 rpm caused a significant increase in the OTRmax (from 17 to 100 mmol L-1 h-1 for DOT of 5% and from 6 to 70 mmol L-1 h-1 for DOT of 0.5%. This increase in the OTRmax improved alginate production, as well as the specific alginate production rate (SAPR, reaching a maximal alginate concentration of 3.1 g L-1 and a SAPR of 0.031 g alg g biom-1 h-1 in the cultures at OTRmax of 100 mmol L-1 h-1. In contrast, the mean molecular mass (MMM of the alginate isolated from cultures developed under non-oxygen limited conditions increased by decreasing the OTRmax, reaching a maximal of 550 kDa at an OTRmax of 17 mmol L-1 h-1 . However, in the cultures developed under oxygen limitation (0.5% DOT, the MMM of the polymer was practically the same (around 200 kDa at 300 and 700 rpm, and this remained constant throughout the cultivation. Conclusions Overall, our results showed that under oxygen-limited and non oxygen-limited conditions, alginate production and its molecular mass are linked to the OTRmax, independently of the DOT of the culture.

Opportunities, perspectives and limits in lactic acid production from waste and industrial by-products

Directory of Open Access Journals (Sweden)

Mladenović Dragana D.

2016-01-01

Full Text Available In line with the goals of sustainable development and environmental protection today great attention is directed towards new technologies for waste and industrial by-products utilization. Waste products represent potentially good raw material for production other valuable products, such as bioethanol, biogas, biodiesel, organic acids, enzymes, microbial biomass, etc. Since the first industrial production to the present, lactic acid has found wide application in food, cosmetic, pharmaceutical and chemical industries. In recent years, the demand for lactic acid has been increasing considerably owing to its potential use as a monomer for the production of poly-lactic acid (PLA polymers which are biodegradable and biocompatible with wide applications. Waste and industrial by-products such are whey, molasses, stillage, waste starch and lignocellulosic materials are a good source of fermentable sugars and many other substances of great importance for the growth of microorganisms, such as proteins, minerals and vitamins. Utilization of waste products for production of lactic acid could help to reduce the total cost of lactic acid production and except the economic viability of the process offers a solution of their disposal. Fermentation process depends on chemical and physical nature of feedstocks and the lactic acid producer. This review describes the characteristics, abilities and limits of microorganisms involved in lactic acid production, as well as the characteristics and types of waste products for lactic acid production. The fermentation methods that have been recently reported to improve lactic acid production are summarized and compared. In order to improve processes and productivity, fed-batch fermentation, fermentation with immobilized cell systems and mixed cultures and opportunities of open (non-sterilized fermentation have been investigated.

The mechanism of improved pullulan production by nitrogen limitation in batch culture of Aureobasidium pullulans.

Science.gov (United States)

Wang, Dahui; Chen, Feifei; Wei, Gongyuan; Jiang, Min; Dong, Mingsheng

2015-08-20

Batch culture of Aureobasidium pullulans CCTCC M 2012259 for pullulan production at different concentrations of ammonium sulfate and yeast extract was investigated. Increased pullulan production was obtained under nitrogen-limiting conditions, as compared to that without nitrogen limitation. The mechanism of nitrogen limitation favoring to pullulan overproduction was revealed by determining the activity as well as gene expression of key enzymes, and energy supply for pullulan biosynthesis. Results indicated that nitrogen limitation increased the activities of α-phosphoglucose mutase and glucosyltransferase, up-regulated the transcriptional levels of pgm1 and fks genes, and supplied more ATP intracellularly, which were propitious to further pullulan biosynthesis. The economic analysis of batch pullulan production indicated that nitrogen limitation could reduce more than one third of the cost of raw materials when glucose was supplemented to a total concentration of 70 g/L. This study also helps to understand the mechanism of other polysaccharide overproduction by nitrogen limitation. Copyright © 2015 Elsevier Ltd. All rights reserved.

Phytoplankton virus production negatively affected by iron limitation

Directory of Open Access Journals (Sweden)

Hans A Slagter

2016-08-01

Full Text Available Fe-limited monocultures of the ubiquitous algae Micromonas pusilla and Phaeocystis globosa were infected with their respective viruses (MpV and PgV to ascertain the effect of Fe-limitation on phytoplankton host-virus dynamics. The effect of the viral shunt on Fe concentrations and bioavailability is starting to gain attention, since not only is Fe released through lysis, but also its solubility is increased by the simultaneous release of Fe-binding dissolved organic ligands. However, the effect of Fe-limitation on the process of viral lysis itself is poorly understood. In this study fine adjustment of a seawater-based culture medium including the use of ultra-clean trace metal conditions and protocols allowed for Fe-limited growth at nanomolar amounts as opposed to micromolar amounts typically employed in culturing. Viral lysates derived from Fe-limited and Fe-replete (for comparison hosts were cross-inoculated in hosts of both Fe treatments, to judge the quality of the resulting lysate as well as the effect of Fe introduction after initial infection. For both phytoplankton host-virus systems, the virus burst size reduced strongly under Fe stress, i.e. on average 28 ±1% of replete. Moreover, the MpV virus progeny showed highly reduced infectivity of 30±7%, whereas PgV infectivity was not affected. A small addition of Fe to Fe-limited cultures coming from the Fe-replete lysate counteracted the negative effect of Fe-limitation on phytoplankton virus production to some extent (but still half of replete, implying that the physiological history of the host at the moment of infection was an important underlying factor. These results indicate that Fe-limitation has the strong potential to reduce the loss of phytoplankton due to virus infection, thereby affecting the extent of Fe-cycling through the viral shunt. To what extent this affects the contribution of viral lysis-induced organic ligand release needs further study.

International benchmaking: Supplying the information for product efficiency policy makers

NARCIS (Netherlands)

Siderius, H.P.; Jeffcott, S.; Blok, K.

2012-01-01

In the development of effective product efficiency policy, the critical element for policy makers is comprehensive, independent information. However, easily accessible, reliable information on the energy performance of products and policies is often scarce within a particular market, and rarer still

Useful to Usable (U2U): Transforming climate information into usable tools to support Midwestern agricultural production

Science.gov (United States)

Prokopy, L. S.; Widhalm, M.

2014-12-01

There is a close connection between weather and climate patterns and successful agricultural production. Therefore, incorporating climate information into farm management is likely to reduce the risk of economic losses and increase profitability. While weather and climate information is becoming ever more abundant and accessible, the use of such information in the agricultural community remains limited. Useful to Usable (U2U): Transforming Climate Variability and Change Information for Cereal Crop Producers is a USDA-NIFA funded research and extension project focused on improving the use of climate information for agricultural production in the Midwestern United States by developing user-driven decision tools and training resources. The U2U team is a diverse and uniquely qualified group of climatologists, crop modelers, agronomists, and social scientists from 9 Midwestern universities and two NOAA Regional Climate Centers. Together, we strive to help producers make better long-term plans on what, when and where to plant and also how to manage crops for maximum yields and minimum environmental damage. To ensure relevance and usability of U2U products, our social science team is using a number of techniques including surveys and focus groups to integrate stakeholder interests, needs, and concerns into all aspects of U2U research. It is through this coupling of physical and social science disciplines that we strive to transform existing climate information into actionable knowledge.

Confidence Limits for the Indirect Effect: Distribution of the Product and Resampling Methods

Science.gov (United States)

MacKinnon, David P.; Lockwood, Chondra M.; Williams, Jason

2010-01-01

The most commonly used method to test an indirect effect is to divide the estimate of the indirect effect by its standard error and compare the resulting z statistic with a critical value from the standard normal distribution. Confidence limits for the indirect effect are also typically based on critical values from the standard normal distribution. This article uses a simulation study to demonstrate that confidence limits are imbalanced because the distribution of the indirect effect is normal only in special cases. Two alternatives for improving the performance of confidence limits for the indirect effect are evaluated: (a) a method based on the distribution of the product of two normal random variables, and (b) resampling methods. In Study 1, confidence limits based on the distribution of the product are more accurate than methods based on an assumed normal distribution but confidence limits are still imbalanced. Study 2 demonstrates that more accurate confidence limits are obtained using resampling methods, with the bias-corrected bootstrap the best method overall. PMID:20157642

Potential low-level waste disposal limits for activation products from fusion

International Nuclear Information System (INIS)

Kennedy, W.E. Jr.; Peloquin, R.A.

1983-09-01

Hanford Engineering Development Laboratory (HEDL) scientists are involved in studies considering alternative construction materials for the first wall of commercial fusion reactors. To permit a comparison of radioactivity levels, both the level of activation and an acceptable limit for the radionuclides present must be known. Generic material composition guidelines can be developed using the US Nuclear Regulatory Commission (NRC) regulations governing the near-surface disposal of low-level radioactive wastes. These regulations consider wastes defined as containing source, special nuclear, or by-product materials arising from research, industrial, medical, and nuclear fuel-cycle activities. However, not all of the activation products produced in low-level wastes from fusion reactors are considered by the NRC in their regulations. The purpose of this report is to present potential low-level waste-disposal limits for ten radionuclides resulting from fusion reactor operations that are not considered in the NRC low-level waste regulations. These potential limits will be used by HEDL scientists to complete their generic material composition guidelines for the first wall of commercial fusion reactors

40 CFR 63.5985 - What are my alternatives for meeting the emission limits for tire production affected sources?

Science.gov (United States)

2010-07-01

... the emission limits for tire production affected sources? 63.5985 Section 63.5985 Protection of... Pollutants: Rubber Tire Manufacturing Emission Limits for Tire Production Affected Sources § 63.5985 What are my alternatives for meeting the emission limits for tire production affected sources? You must use...

Enhanced limonene production in cyanobacteria reveals photosynthesis limitations.

Science.gov (United States)

Wang, Xin; Liu, Wei; Xin, Changpeng; Zheng, Yi; Cheng, Yanbing; Sun, Su; Li, Runze; Zhu, Xin-Guang; Dai, Susie Y; Rentzepis, Peter M; Yuan, Joshua S

2016-12-13

Terpenes are the major secondary metabolites produced by plants, and have diverse industrial applications as pharmaceuticals, fragrance, solvents, and biofuels. Cyanobacteria are equipped with efficient carbon fixation mechanism, and are ideal cell factories to produce various fuel and chemical products. Past efforts to produce terpenes in photosynthetic organisms have gained only limited success. Here we engineered the cyanobacterium Synechococcus elongatus PCC 7942 to efficiently produce limonene through modeling guided study. Computational modeling of limonene flux in response to photosynthetic output has revealed the downstream terpene synthase as a key metabolic flux-controlling node in the MEP (2-C-methyl-d-erythritol 4-phosphate) pathway-derived terpene biosynthesis. By enhancing the downstream limonene carbon sink, we achieved over 100-fold increase in limonene productivity, in contrast to the marginal increase achieved through stepwise metabolic engineering. The establishment of a strong limonene flux revealed potential synergy between photosynthate output and terpene biosynthesis, leading to enhanced carbon flux into the MEP pathway. Moreover, we show that enhanced limonene flux would lead to NADPH accumulation, and slow down photosynthesis electron flow. Fine-tuning ATP/NADPH toward terpene biosynthesis could be a key parameter to adapt photosynthesis to support biofuel/bioproduct production in cyanobacteria.

Sources of Information as Determinants of Product and Process Innovation.

Science.gov (United States)

Gómez, Jaime; Salazar, Idana; Vargas, Pilar

2016-01-01

In this paper we use a panel of manufacturing firms in Spain to examine the extent to which they use internal and external sources of information (customers, suppliers, competitors, consultants and universities) to generate product and process innovation. Our results show that, although internal sources are influential, external sources of information are key to achieve innovation performance. These results are in line with the open innovation literature because they show that firms that are opening up their innovation process and that use different information sources have a greater capacity to generate innovations. We also find that the importance of external sources of information varies depending on the type of innovation (product or process) considered. To generate process innovation, firms mainly rely on suppliers while, to generate product innovation, the main contribution is from customers. The potential simultaneity between product and process innovation is also taken into consideration. We find that the generation of both types of innovation is not independent.

Sources of Information as Determinants of Product and Process Innovation.

Directory of Open Access Journals (Sweden)

Jaime Gómez

Full Text Available In this paper we use a panel of manufacturing firms in Spain to examine the extent to which they use internal and external sources of information (customers, suppliers, competitors, consultants and universities to generate product and process innovation. Our results show that, although internal sources are influential, external sources of information are key to achieve innovation performance. These results are in line with the open innovation literature because they show that firms that are opening up their innovation process and that use different information sources have a greater capacity to generate innovations. We also find that the importance of external sources of information varies depending on the type of innovation (product or process considered. To generate process innovation, firms mainly rely on suppliers while, to generate product innovation, the main contribution is from customers. The potential simultaneity between product and process innovation is also taken into consideration. We find that the generation of both types of innovation is not independent.

Sources of Information as Determinants of Product and Process Innovation

Science.gov (United States)

2016-01-01

In this paper we use a panel of manufacturing firms in Spain to examine the extent to which they use internal and external sources of information (customers, suppliers, competitors, consultants and universities) to generate product and process innovation. Our results show that, although internal sources are influential, external sources of information are key to achieve innovation performance. These results are in line with the open innovation literature because they show that firms that are opening up their innovation process and that use different information sources have a greater capacity to generate innovations. We also find that the importance of external sources of information varies depending on the type of innovation (product or process) considered. To generate process innovation, firms mainly rely on suppliers while, to generate product innovation, the main contribution is from customers. The potential simultaneity between product and process innovation is also taken into consideration. We find that the generation of both types of innovation is not independent. PMID:27035456

Study on Product Lines for Digital Information Products%数字信息产品生产线研究

Institute of Scientific and Technical Information of China (English)

毛凌翔; 程慧平

2014-01-01

在数字信息逐渐从“资源观”向“产品观”转换的背景下，从数字信息产品的角度分析数字信息产品生产过程与模型，提出基于人工构件变异和组件重用的数字信息产品生产线理论，并应用于地理信息产品中进行实证，有望提高数字信息产品的生产效率并节约生产成本。%With the development of digital information technology and market-driven economy, user needs become diversified and customized today, and digital information is increasingly turning toward product-perspective direction from the resource-perspective. From the perspective of digital information products, digital information production process and model has been analyzed, and a digital information product lines theory based on artifacts variation and component reuse has been proposed. Then using instance to prove the correctness of the theory, practical use of digital information production line mode can greatly improve production efficiency of digital information products and significantly save production costs.

40 CFR Table 1 to Subpart Xxxx of... - Emission Limits for Tire Production Affected Sources

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 12 2010-07-01 2010-07-01 true Emission Limits for Tire Production Affected Sources 1 Table 1 to Subpart XXXX of Part 63 Protection of Environment ENVIRONMENTAL PROTECTION.... 63, Subpt. XXXX, Table 1 Table 1 to Subpart XXXX of Part 63—Emission Limits for Tire Production...

17 CFR 248.12 - Limits on sharing account number information for marketing purposes.

Science.gov (United States)

2010-04-01

... account number information for marketing purposes. (a) General prohibition on disclosure of account... 17 Commodity and Securities Exchanges 3 2010-04-01 2010-04-01 false Limits on sharing account number information for marketing purposes. 248.12 Section 248.12 Commodity and Securities Exchanges...

Limits on likesign dilepton production in nu/sub μ/ interactions

International Nuclear Information System (INIS)

Baker, N.J.; Connolly, P.L.; Kahn, S.A.

1985-01-01

We have searched for the production of likesign dilepton events (nu/sub μ/ + Ne → μ - + e - + ...) in a wideband neutrino beam at FNAL using the 15' bubble chamber. We observe no signal above the background arising from conventional sources. We set 90% confidence level upper limits for the production rates of (nu/sub μ/ + Ne → μ - + e - + ...)/(nu/sub μ/ + Ne → μ - + ...) less than or equal to 8 * 10 -5 and (nu/sub μ/ + Ne → μ - + e - + ...)/(nu/sub μ/ + Ne → μ - + e + + ...) less than or equal to 6 * 10 -2

Commercial products that convey personal health information in emergencies.

Science.gov (United States)

Potini, Vishnu C; Weerasuriya, Dilani N; Lowery-North, Douglas W; Kellermann, Arthur L

2011-12-01

Describe commercially available products and services designed to convey personal health information in emergencies. The search engine Google®, supplemented by print ads, was used to identify companies and organizations that offer relevant products and services to the general market. Disease-specific, health system, and health plan-specific offerings were excluded. Vendor web sites were the primary sources of information, supplemented by telephone and e-mail queries to sales representatives. Perfect inter-rater agreement was achieved. Thirty-nine unique vendors were identified. Eight sell engraved jewelry. Three offer an embossed card or pamphlet. Twelve supply USB drives with various features. Eleven support password-protected web sites. Five maintain national call centers. Available media differed markedly with respect to capacity and accessibility. Quoted prices ranged from a one-time expenditure of $3.50 to an annual fee of $200. Associated features and annual fees varied widely. A wide range of products and services exist to help patients convey personal health information. Health care providers should be familiar with their features, so they can access the information in a disaster or emergency.

76 FR 81958 - Notice of Submission of Proposed Information Collection to OMB; Limited English Proficiency...

Science.gov (United States)

2011-12-29

... Proposed Information Collection to OMB; Limited English Proficiency Initiative (LEPI) Program AGENCY... that support the assistance of persons with limited English proficiency in utilizing the services...: Limited English Proficiency Initiative (LEPI) Program. OMB Approval Number: 2529-0051. Form Numbers...

Marketing information: The technical report as product

Science.gov (United States)

Stoher, F. F.; Pinelli, T. E.

1981-01-01

Technical reports constitute a product, the primary means for communicating the results of research to the user. The Langley scientific and technical information (STI) review and evaluation project undertook a review of the technical report as an effective product for information communication. Style manuals describing theory and practice in technical report preparation; publication manuals covering such factors as design, layout, and type style; and copies of technical reports were obtained from industrial, academic, governmental, and research organizations. Based on an analysis of this material, criteria will be established for the report components, for the relationship of the components within the report context, and for the overall report organization. The criteria will be used as bench marks and compared with the publication standards currently used to prepare NASA technical reports.

Correlating Information Contents of Gene Ontology Terms to Infer Semantic Similarity of Gene Products

Directory of Open Access Journals (Sweden)

Mingxin Gan

2014-01-01

Full Text Available Successful applications of the gene ontology to the inference of functional relationships between gene products in recent years have raised the need for computational methods to automatically calculate semantic similarity between gene products based on semantic similarity of gene ontology terms. Nevertheless, existing methods, though having been widely used in a variety of applications, may significantly overestimate semantic similarity between genes that are actually not functionally related, thereby yielding misleading results in applications. To overcome this limitation, we propose to represent a gene product as a vector that is composed of information contents of gene ontology terms annotated for the gene product, and we suggest calculating similarity between two gene products as the relatedness of their corresponding vectors using three measures: Pearson’s correlation coefficient, cosine similarity, and the Jaccard index. We focus on the biological process domain of the gene ontology and annotations of yeast proteins to study the effectiveness of the proposed measures. Results show that semantic similarity scores calculated using the proposed measures are more consistent with known biological knowledge than those derived using a list of existing methods, suggesting the effectiveness of our method in characterizing functional relationships between gene products.

Information-based cues at point of choice to change selection and consumption of food, alcohol and tobacco products: a systematic review.

Science.gov (United States)

Carter, Patrice; Bignardi, Giacomo; Hollands, Gareth J; Marteau, Theresa M

2018-03-27

Reducing harmful consumption of food, alcohol, and tobacco products would prevent many cancers, diabetes and cardiovascular disease. Placing information-based cues in the environments in which we select and consume these products has the potential to contribute to changing these behaviours. In this review, information-based cues are defined as those which comprise any combination of words, symbols, numbers or pictures that convey information about a product or its use. We specifically exclude cues which are located on the products themselves. We conducted a systematic review of randomised, cluster- randomised, and non-randomised controlled trials to assess the impact of such cues on selection and consumption. Thirteen studies met the inclusion criteria, of which 12 targeted food (most commonly fruit and vegetables), one targeted alcohol sales, and none targeted tobacco products. Ten studies reported statistically significant effects on some or all of the targeted products, although studies were insufficiently homogenous to justify meta-analysis. Existing evidence suggests information-based cues can influence selection and consumption of food and alcohol products, although significant uncertainty remains. The current evidence base is limited both in quality and quantity, with relatively few, heterogeneous studies at unclear or high risk of bias. Additional, more rigorously conducted studies are warranted to better estimate the potential for these interventions to change selection and consumption of food, alcohol and tobacco products. PROSPERO. 2016; CRD42016051884 .

Limitation on the amount of accessible information in a quantum channel

International Nuclear Information System (INIS)

Schumacher, B.; Westmoreland, M.; Wootters, W.K.

1996-01-01

We prove a new result limiting the amount of accessible information in a quantum channel. This generalizes Kholevo close-quote s theorem and implies it as a simple corollary. Our proof uses the strong subadditivity of the von Neumann entropy functional S(ρ) and a specific physical analysis of the measurement process. The result presented here has application in information obtained from open-quote open-quote weak close-quote close-quote measurements, such as those sometimes considered in quantum cryptography. copyright 1996 The American Physical Society

Sources of product information used by consumers when purchasing kitchen cabinets.

Science.gov (United States)

Geoffrey H. Donovan; David L. Nicholls; Joseph. Roos

2004-01-01

Survey data from home shows in Seattle, Washington and Anchorage, Alaska were used to determine the sources of product information used by consumers when buying kitchen cabinets. Results show that in-store sales staff are the most common source of product information, and that consumers' favorite wood species, age, and gender can influence the source of product...

The value of information updating in new product development

CERN Document Server

Artmann, Christian

2009-01-01

This work shows how managing uncertainty in new product development can be improved by conducting an information update during the development process. The book details the comprehensive model needed to perform that information update.

Effects of Common Factors on Dynamics of Stocks Traded by Investors with Limited Information Capacity

Directory of Open Access Journals (Sweden)

Songtao Wu

2017-01-01

Full Text Available An artificial stock market with agent-based model is built to investigate effects of different information characteristics of common factors on the dynamics stock returns. Investors with limited information capacity update their beliefs based on the information they have obtained and processed and optimize portfolios based on beliefs. We find that with changing of concerned information characteristics the uncertainty of stock price returns rises and is higher than the uncertainty of intrinsic value returns. However, this increase is constrained by the limited information capacity of investors. At the same time, we also find that dependence between returns of stock prices also increased with the changing information environment. The uncertainty and dependency pertaining to prices show a positive relationship. However, the positive relationship is weakened when taking into account the features of intrinsic values, based on which prices are generated.

Exploring the Limits of Crop Productivity: High Light Studies with Lettuce

OpenAIRE

USU Crop Physiology Lab

2015-01-01

There are many different leaf lettuce cultivars and they range in color from light green and yellow to deep green as a result of higher concentrations of chlorophyll in the leaves. We tested four cultivars in high light to explore the limits of lettuce productivity.

A Product Development Decision Model for Cockpit Weather Information Systems

Science.gov (United States)

Sireli, Yesim; Kauffmann, Paul; Gupta, Surabhi; Kachroo, Pushkin

2003-01-01

There is a significant market demand for advanced cockpit weather information products. However, it is unclear how to identify the most promising technological options that provide the desired mix of consumer requirements by employing feasible technical systems at a price that achieves market success. This study develops a unique product development decision model that employs Quality Function Deployment (QFD) and Kano's model of consumer choice. This model is specifically designed for exploration and resolution of this and similar information technology related product development problems.

A Product Development Decision Model for Cockpit Weather Information System

Science.gov (United States)

Sireli, Yesim; Kauffmann, Paul; Gupta, Surabhi; Kachroo, Pushkin; Johnson, Edward J., Jr. (Technical Monitor)

2003-01-01

There is a significant market demand for advanced cockpit weather information products. However, it is unclear how to identify the most promising technological options that provide the desired mix of consumer requirements by employing feasible technical systems at a price that achieves market success. This study develops a unique product development decision model that employs Quality Function Deployment (QFD) and Kano's model of consumer choice. This model is specifically designed for exploration and resolution of this and similar information technology related product development problems.

THE EVOLUTION OF ROMANIAN TRADE IN INFORMATION PRODUCTS AND

Directory of Open Access Journals (Sweden)

CECILIA IRINA RABONTU

2015-10-01

Full Text Available The trade in Romania has seen an increased dynamism in many areas. When it comes to food or non food products, or services are bringing into question we can say that the period of consumerism in which we are living hallmarks the commercial activities. Trade in information products and services had lately a remarkable richness, being the categories that arouses greatest interest from certain consumers becoming more and more numerous and demanding in terms of technology. In this paper we proposed to analyze how much the sales of information products and services respond to the many needs expressed by Romanian customers and to capture the dynamics in which this type of commerce evolved.

Multidisciplinary approach to successful implementation of production information system (PRISM)

Energy Technology Data Exchange (ETDEWEB)

Shariff, M.R.; Gopalakrishnan, S.G.; Francis, N. [and others

1995-12-31

A company wide corporate and regional production database supporting all production areas was envisaged critical to the current expansion within Petronas Carigali Sdn Bhd (PCSB). A multi disciplinary project team was thus formed to analyze the requirements prior to developing, testing, implementing and training users. PCSB has currently evolved into a mature E & P company on par with other E & P companies within the region. This expansion necessitates a common Production Information System for the efficient dissemination of vital Production Information for Production Surveillance, Reservoir Management, Reserve Assessment, Special Studies and Standardized Group-wide Reporting. This paper will discuss all the phases involved in the project which includes Systems Requirement Study, Data Migration, System Development, System Implementation and Post-Implementation Plan.

Relationship between availability of contraceptive products and pharmacists as information sources.

Science.gov (United States)

Cook, Elizabeth A; Farris, Karen B; Chrischilles, Elizabeth; Aquilino, Mary

2012-01-01

To describe the relationship between the availability and accessibility of contraceptives in Iowa pharmacies and the extent to which pharmacists act as an information source regarding contraceptives. Descriptive, exploratory, nonexperimental study. Iowa in fall 2008. 282 pharmacists at Iowa community pharmacies. Cross-sectional survey. Contraceptive availability score, contraceptive accessibility score, and total access score. Regression analyses tested the relationships between the pharmacist information source score and the contraceptive availability, accessibility, and total access scores, controlling for geography, ownership, staff size, and average number of prescriptions per day. Significant positive relationships between the pharmacist information source score and product accessibility, product availability, and total access were observed. The relationship appeared to be driven primarily by product availability, and all were significantly influenced by pharmacy type. Significant negative relationships were found between product accessibility and independent/small chain pharmacies and mass merchandiser/grocery store pharmacies relative to large chain pharmacies. A significant negative relationship was found between independent/small chain pharmacies and the product availability score. Significant relationships were found between pharmacists' ability to act as sources of information for contraceptive products and the availability, accessibility, and overall access to contraceptives in the pharmacy.

Distinct roles of two anaplerotic pathways in glutamate production induced by biotin limitation in Corynebacterium glutamicum.

Science.gov (United States)

Sato, Hiroki; Orishimo, Keita; Shirai, Tomokazu; Hirasawa, Takashi; Nagahisa, Keisuke; Shimizu, Hiroshi; Wachi, Masaaki

2008-07-01

Corynebacterium glutamicum is a biotin auxotrophic bacterium in which glutamate production is induced under biotin-limited conditions. During glutamate production, anaplerotic reactions catalyzed by phosphoenolpyruvate carboxylase (PEPC) and a biotin-containing enzyme pyruvate carboxylase (PC) are believed to play an important role in supplying oxaloacetate in the tricarboxylic acid cycle. To understand the distinct roles of PEPC and PC on glutamate production by C. glutamicum, we observed glutamate production induced under biotin-limited conditions in the disruptants of the genes encoding PEPC (ppc) and PC (pyc), respectively. The pyc disruptant retained the ability to produce high amounts of glutamate, and lactate was simultaneously produced probably due to the increased intracellular pyruvate levels. On the other hand, the ppc knockout mutant could not produce glutamate. Additionally, glutamate production in the pyc disruptant was enhanced by overexpression of ppc rather than disruption of the lactate dehydrogenase gene (ldh), which is involved in lactate production. Metabolic flux analysis based on the 13C-labeling experiment and measurement of 13C-enrichment in glutamate using nuclear magnetic resonance spectroscopy revealed that the flux for anaplerotic reactions in the pyc disruptant was lower than that in the wild type, concomitantly increasing the flux for lactate formation. Moreover, overexpression of ppc increased this flux in both the pyc disruptant and the wild type. Our results suggest that the PEPC-catalyzed anaplerotic reaction is necessary for glutamate production induced under biotin-limited conditions, because PC is not active during glutamate production, and overexpression of ppc effectively enhances glutamate production under biotin-limited conditions.

Complex New Product Development projects - How the Project Manager’s Information Sharing With Core Actors Changes Over Time

DEFF Research Database (Denmark)

Jepsen, Lisbeth Brøde

2013-01-01

A heavily burdened project manager must ensure effective information sharing with actors inside and outside the organization because this is a necessary condition for a new product development (NPD) project to achieve its objectives. Knowledge, however, on who actually assists a project manager...... with the information sharing during NPD projects is limited; therefore, this study of longitudinal objective email data (4658 emails) during a NPD project contributes to theory and practice by advancing our understanding of when and how the project manager establishes relationships with different core actors inside...

Changing Information Management in Product-Service System PLM: Customer-Oriented Strategy

OpenAIRE

Smirnov , Alexander; Shilov , Nikolay; Oroszi , Andreas; Sinko , Mario; Krebs , Thorsten

2017-01-01

Part 11: Product, Service, Systems (PSS); International audience; Increasing competition and appearance of new information and communication technologies makes companies to introduce new production and marketing models. The paper shares the experiences of improving PLM information management at an automation equipment manufacturer caused by implementation of product-service systems and their customer-driven configuration. Though the research results are based on the analysis of one company, t...

19 CFR 207.7 - Limited disclosure of certain business proprietary information under administrative protective...

Science.gov (United States)

2010-04-01

... corresponding information about a competitor (pricing, product design, etc.). (4) Forms and determinations. (i... information pursuant to this paragraph, the authorized applicant need not file a new application in the final...

Inventory control with product returns : The impact of imperfect information

NARCIS (Netherlands)

De Brito, M.P.; Laan, E.A.

2009-01-01

Product returns are characterized by considerable uncertainty on time and quantity. In the literature on inventory management for product return environments best forecasts of future returns are associated with methods that use the most information regarding product return history. In practice,

Productivity in Information Service Industries: a Panel Analysis of Japanese Firms

OpenAIRE

Futoshi Kurokawa; Kiyohiko G. Nishimura

2006-01-01

We examine factors determining productivity of information-technology service activities at firm level, using most comprehensive data of information service industries in Japan. We focus on the degree of modularisation and resulting outsourcing and economies/diseconomies of scale in software development, and changes. We find that outsourcing has persistent negative effects on total factor productivity, suggesting not only productivity-enhancing modularisation is not fully utilised but also pr...

40 CFR 63.6004 - How do I demonstrate continuous compliance with the emission limits for tire production affected...

Science.gov (United States)

2010-07-01

... compliance with the emission limits for tire production affected sources? 63.6004 Section 63.6004 Protection... Pollutants: Rubber Tire Manufacturing Continuous Compliance Requirements for Tire Production Affected Sources § 63.6004 How do I demonstrate continuous compliance with the emission limits for tire production...

Integrated system of production information processing for surface mines

Energy Technology Data Exchange (ETDEWEB)

Li, K.; Wang, S.; Zeng, Z.; Wei, J.; Ren, Z. [China University of Mining and Technology, Xuzhou (China). Dept of Mining Engineering

2000-09-01

Based on the concept of geological statistic, mathematical program, condition simulation, system engineering, and the features and duties of each main department in surface mine production, an integrated system for surface mine production information was studied systematically and developed by using the technology of data warehousing, CAD, object-oriented and system integration, which leads to the systematizing and automating of the information management, data processing, optimization computing and plotting. In this paper, its overall object, system design, structure and functions and some key techniques were described. 2 refs., 3 figs.

New Product Development (Npd) Process In Subsidiary: Information Perspectives

OpenAIRE

Firmanzah

2008-01-01

Information is an important resource for new product development (NPD) process in subsidiary. However, we still lack of research to analyze NPD process from information perspective in subsidiary context. This research is an exploratory research and it exploited 8 cases of NPD process in consumer goods subsidiaries operating in Indonesian market. Three types of information have been identified and analyzed NPD process; global, regional and local information. The result of this research ...

The Effects of the Application of Production Information Systems

Directory of Open Access Journals (Sweden)

Dusanka Lecic

2014-02-01

Full Text Available The authors show you in this paper definition and functions of information systems, information systems development methodologies and stages of development. Also, the authors will show the effects of the application of production information systems. Authors also include SWOT analysis in which show the influence of the external and internal environment on the implementation of IS in business.

Possibilities and limitations of information in radioisotope examination of liver function

International Nuclear Information System (INIS)

Blaha, V.; Kolinska, J.; Horak, J.

1985-01-01

The 20 years' experience is described with the use of clearance methods for radiocolloid - 198 Au, Rose Bengal- 131 I and the extraction fraction of Rose Bengal- 131 I in patients with different liver disorders. Attention is also focused on indications, interpretations, as well as on the advantages and information limits of the above-mentioned radioisotope methods. (author)

Product shipping information using graceful labeling on undirected tree graph approach

Science.gov (United States)

Kuan, Yoong Kooi; Ghani, Ahmad Termimi Ab

2017-08-01

Product shipping information is the related information of an ordered product that ready to be shipped to the foreign customer's company, where the information represents as an irrefutable proof in black and white to the local manufacturer by E-mails. This messy and unordered list of information is stored in E-mail folders by the people incharge, which do not function in collating the information properly. So, in this paper, an algorithm is proposed on how to rearrange the messy information from the sequence of a path graph structure into a concise version of a caterpillar graph with achieving the concept of graceful labeling. The final graceful caterpillar graph consists of the full listed information together with the numbering, which able to assist people get the information fleetly for shipping arrangement procedure.

Base Stock Policy in a Join-Type Production Line with Advanced Demand Information

Science.gov (United States)

Hiraiwa, Mikihiko; Tsubouchi, Satoshi; Nakade, Koichi

Production control such as the base stock policy, the kanban policy and the constant work-in-process policy in a serial production line has been studied by many researchers. Production lines, however, usually have fork-type, join-type or network-type figures. In addition, in most previous studies on production control, a finished product is required at the same time as arrival of demand at the system. Demand information is, however, informed before due date in practice. In this paper a join-type (assembly) production line under base stock control with advanced demand information in discrete time is analyzed. The recursive equations for the work-in-process are derived. The heuristic algorithm for finding appropriate base stock levels of all machines at short time is proposed and the effect of advanced demand information is examined by simulation with the proposed algorithm. It is shown that the inventory cost can decreases with little backlogs by using the appropriate amount of demand information and setting appropriate base stock levels.

Reduced detrital resources limit Pycnopsyche gentilis (Trichoptera: Limnephilidae) production and growth

Science.gov (United States)

Susan L. Eggert; J. Bruce Wallace

2003-01-01

Leaf inputs in temperate forest streams may limit caddisfly production because leaf detritus serves both as a food and case-material resource. We estimated Pycnopsyche gentilis produdion in a stream experimentally decoupled fmm its riparian habitat and a reference stream for 8 y in the southern Appalachians. We also examined laboratory survivorship,...

The Impact of Product Assortment Size and Attribute Quantity on Information Searches

DEFF Research Database (Denmark)

Dörnyei, Krisztina Rita; Chrysochou, Polymeros; Krystallis, Athanasios

2017-01-01

Purpose: This paper investigates the impact of assortment size and attribute quantity on the depth and content of consumer information searches. Design/methodology/approach: For a computer-aided experiment using an information display board, participants (n=393) were placed in a simulated shopping...... situation that involved choosing a product among three sets of frequently purchased, low-involvement, FMCG alternatives. Findings: The findings show that when the assortment size increases, consumers acquire information from more products and cues but sacrifice product attributes. In particular...

Real time information management for improving productivity in metallurgical complexes

International Nuclear Information System (INIS)

Bascur, O.A.; Kennedy, J.P.

1999-01-01

Applying the latest information technologies in industrial plants has become a serious challenge to management and technical teams. The availability of real time and historical operations information to identify the most critical part of the processing system from mechanical integrity is a must for global plant optimization. Expanded use of plant information on the desktop is a standard tool for revenue improvement, cost reduction, and adherence to production constraints. The industrial component desktop supports access to information for process troubleshooting, continuous improvement and innovation by plant and staff personnel. Collaboration between groups enables the implementation of an overall process effectiveness index based on losses due to equipment availability, production and product quality. The key to designing technology is to use the Internet based technologies created by Microsoft for its marketplace-office automation and the Web. Time derived variables are used for process analysis, troubleshooting and performance assessment. Connectivity between metallurgical complexes, research centers and their business system has become a reality. Two case studies of large integrated mining/metallurgical complexes are highlighted. (author)

Study on Rangeland production Potential and its Limitations in the Semi-Arid lands of Northern Kenya

International Nuclear Information System (INIS)

Keya, G.A.; Hornetz, B.

1999-01-01

Results obtained from recent studies focused on rangeland potential as influenced by human activity and climatic factors in the semi-arid and pastoral ecosystems of Northern Kenya indicated great temporal and spatial forage production variability. The objective of the studies was to document the primary production potential in relation to water stress (drought), herbivory and direct human activities. Efforts also focused on finding possibilities of increasing productivity while conserving the finite resources for sustainable use. Laboratory field and numeric methods were employed over several seasons and years. Forb and grass production was more viable than that of the brows (dwarf shrub) layer. Compared to forbs and dwarf shrubs, The grass layer contributed less to the total of production in all seasons, indicating that the region had less potential for grazers compared to browsers. Spatial-temporal variations in rangeland carrying capacity reflected the great spatial heterogeneity in vegetation types and production. Similarly, seasonal difference were very evident, with highest estimates in the long rainy and lowest during the dry and short rainy seasons, respectively. Factors limiting rangeland production potential and were identified to be moisture deficiency, resource-use conflicts, an increasing and partial sedentarised nomadic population, overgrazing, tree felling, and land degradation (desert encroachment). Measures that can increase rangelands production potential and provide a better way of life for the inhabitants of the region include: (a) identification of land degradation (e.g. by means of bio-indicators and Geographical Information systems, GIS); (b) technical interventions (i.e. soil and water conservation,restoration of degraded ares, fodder production); (c)socio-economic interventions (i.e. resolution of resource-use conflicts, alleviation of poverty, infrastructure development, improvement of livestock marketing channels, etc) and (d) continued

Benefits and Limitations of DNA Barcoding and Metabarcoding in Herbal Product Authentication.

Science.gov (United States)

Raclariu, Ancuta Cristina; Heinrich, Michael; Ichim, Mihael Cristin; de Boer, Hugo

2018-03-01

Herbal medicines play an important role globally in the health care sector and in industrialised countries they are often considered as an alternative to mono-substance medicines. Current quality and authentication assessment methods rely mainly on morphology and analytical phytochemistry-based methods detailed in pharmacopoeias. Herbal products however are often highly processed with numerous ingredients, and even if these analytical methods are accurate for quality control of specific lead or marker compounds, they are of limited suitability for the authentication of biological ingredients. To review the benefits and limitations of DNA barcoding and metabarcoding in complementing current herbal product authentication. Recent literature relating to DNA based authentication of medicinal plants, herbal medicines and products are summarised to provide a basic understanding of how DNA barcoding and metabarcoding can be applied to this field. Different methods of quality control and authentication have varying resolution and usefulness along the value chain of these products. DNA barcoding can be used for authenticating products based on single herbal ingredients and DNA metabarcoding for assessment of species diversity in processed products, and both methods should be used in combination with appropriate hyphenated chemical methods for quality control. DNA barcoding and metabarcoding have potential in the context of quality control of both well and poorly regulated supply systems. Standardisation of protocols for DNA barcoding and DNA sequence-based identification are necessary before DNA-based biological methods can be implemented as routine analytical approaches and approved by the competent authorities for use in regulated procedures. © 2017 The Authors. Phytochemical Analysis Published by John Wiley & Sons Ltd. © 2017 The Authors. Phytochemical Analysis Published by John Wiley & Sons Ltd.

40 CFR 63.8055 - How do I comply with a weight percent HAP limit in coating products?

Science.gov (United States)

2010-07-01

... HAP limit in coating products? 63.8055 Section 63.8055 Protection of Environment ENVIRONMENTAL...: Miscellaneous Coating Manufacturing Alternative Means of Compliance § 63.8055 How do I comply with a weight percent HAP limit in coating products? (a) As an alternative to complying with the requirements in Table 1...

Hop limited epidemic-like information spreading in mobile social networks with selfish nodes

Science.gov (United States)

Wu, Yahui; Deng, Su; Huang, Hongbin

2013-07-01

Similar to epidemics, information can be transmitted directly among users in mobile social networks. Different from epidemics, we can control the spreading process by adjusting the corresponding parameters (e.g., hop count) directly. This paper proposes a theoretical model to evaluate the performance of an epidemic-like spreading algorithm, in which the maximal hop count of the information is limited. In addition, our model can be used to evaluate the impact of users’ selfish behavior. Simulations show the accuracy of our theoretical model. Numerical results show that the information hop count can have an important impact. In addition, the impact of selfish behavior is related to the information hop count.

Hop limited epidemic-like information spreading in mobile social networks with selfish nodes

International Nuclear Information System (INIS)

Wu, Yahui; Deng, Su; Huang, Hongbin

2013-01-01

Similar to epidemics, information can be transmitted directly among users in mobile social networks. Different from epidemics, we can control the spreading process by adjusting the corresponding parameters (e.g., hop count) directly. This paper proposes a theoretical model to evaluate the performance of an epidemic-like spreading algorithm, in which the maximal hop count of the information is limited. In addition, our model can be used to evaluate the impact of users’ selfish behavior. Simulations show the accuracy of our theoretical model. Numerical results show that the information hop count can have an important impact. In addition, the impact of selfish behavior is related to the information hop count. (paper)

Survey on the life cycle system of a product with shared information; Joho kyoyugata product life cycle system ni kansuru chosa hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

This report provides and proposes new concept and optimization technology on the life cycle system of product for emission minimum. For the proposed life cycle system of product with shared information, the global emission minimum is realized by considering the final emission, the information is given to the product and shared in all the life cycle system, the information sending function is considered from the product, and the information necessary for material processing are actively used. For this life cycle system of product, development of the information model for the system, development of the technology of data saving, renewing, searching and sending, development of sensing and re-using technologies of the product for life cycle, development of the technology attaching information in the product for emission minimum, design of the guidelines of material composition, and research and development of materials for emission minimum are extracted and provided as tasks. 26 refs., 69 figs., 8 tabs.

Nutrient limitation on ecosystem productivity and processes of mature and old-growth subtropical forests in China.

Directory of Open Access Journals (Sweden)

Enqing Hou

Full Text Available Nitrogen (N is considered the dominant limiting nutrient in temperate regions, while phosphorus (P limitation frequently occurs in tropical regions, but in subtropical regions nutrient limitation is poorly understood. In this study, we investigated N and P contents and N:P ratios of foliage, forest floors, fine roots and mineral soils, and their relationships with community biomass, litterfall C, N and P productions, forest floor turnover rate, and microbial processes in eight mature and old-growth subtropical forests (stand age >80 yr at Dinghushan Biosphere Reserve, China. Average N:P ratios (mass based in foliage, litter (L layer and mixture of fermentation and humus (F/H layer, and fine roots were 28.3, 42.3, 32.0 and 32.7, respectively. These values are higher than the critical N:P ratios for P limitation proposed (16-20 for foliage, ca. 25 for forest floors. The markedly high N:P ratios were mainly attributed to the high N concentrations of these plant materials. Community biomass, litterfall C, N and P productions, forest floor turnover rate and microbial properties were more strongly related to measures of P than N and frequently negatively related to the N:P ratios, suggesting a significant role of P availability in determining ecosystem production and productivity and nutrient cycling at all the study sites except for one prescribed disturbed site where N availability may also be important. We propose that N enrichment is probably a significant driver of the potential P limitation in the study area. Low P parent material may also contribute to the potential P limitation. In general, our results provided strong evidence supporting a significant role for P availability, rather than N availability, in determining ecosystem primary productivity and ecosystem processes in subtropical forests of China.

Informative Advertising in Concentrated, Differentiated Markets

OpenAIRE

Hamilton, Stephen F.

2004-01-01

I examine the welfare implications of informative advertising in a differentiated product duopoly market. The analysis reconciles the apparently conflicting results in previous studies that find advertising to be undersupplied in homogeneous product markets and in differentiated markets with a limited number of firms, but oversupplied in differentiated markets with a large number of firms. In equilibrium, purely informative advertising is always overprovided when the degree of product differe...

16 CFR 1500.88 - Exemptions from lead limits under section 101 of the Consumer Product Safety Improvement Act for...

Science.gov (United States)

2010-01-01

... 101 of the Consumer Product Safety Improvement Act for certain electronic devices. 1500.88 Section... from lead limits under section 101 of the Consumer Product Safety Improvement Act for certain electronic devices. (a) The Consumer Product Safety Improvement Act (CPSIA) provides for specific lead limits...

Production of fungal alpha-amylase by Saccharomyces kluyveri in glucose-limited cultivations

DEFF Research Database (Denmark)

Møller, Kasper; Sharif, M.Z.; Olsson, Lisbeth

2004-01-01

Heterologous protein production by the yeast Saccharomyces kluyveri was investigated under aerobic glucose-limited conditions. alpha-Amylase from Aspergillus oryzae was used as model protein and the gene was expressed from a S. cerevisiae 2 mu plasmid. For comparison, strains of both S. kluyveri ...

Variation in adverse drug reactions listed in product information for antidepressants and anticonvulsants, between the USA and Europe: a comparison review of paired regulatory documents.

Science.gov (United States)

Cornelius, Victoria R; Liu, Kun; Peacock, Janet; Sauzet, Odile

2016-03-20

To compare consistency of adverse drug reaction (ADR) data in publicly available product information documents for brand drugs, between the USA and Europe. To assess the usefulness of information for prescribers and patients. A comparison review of product information documents for antidepressants and anticonvulsants concurrently marketed by the same pharmaceutical company in the USA and Europe. For each drug, data were extracted from the US Product Inserts and the European Summary of Product Characteristics documents between 09/2013 and 01/2015. Individuals contributing ADR information to product information documents. All ADRs reported in product information sections 5 and 6 (USA), and 4·4 and 4·8 (Europe). Twelve brand drugs--24 paired documents--were included. On average, there were 77 more ADRs reported in the USA compared with in the European product information document, with a median number of 201 ADRs (range: 65-425) and 114 (range: 56-265), respectively. More product information documents in the USA reported information on the source of evidence (10 vs 5) and risk (9 vs 5) for greater than 80% of ADRs included in the document. There was negligible information included regarding duration, severity, reversibility or recurrence of ADRs. On average, only 29% of ADR terms were reported in both paired documents. Product information documents contained a large number of ADRs, but lacked contextual data and information important to patients and prescribers, such as duration, severity and reversibility. The ADR profile was found to be inconsistently reported between the USA and Europe, for the same drug. Identifying, selecting, summarising and presenting multidimensional harm data should be underpinned by practical evidence-based guidelines. In order for prescribers to provide considered risk-benefit advice across competing drug therapies to patients, they need access to comprehensible and reliable ADR information. Published by the BMJ Publishing Group Limited

Set of information technologies and their role in automation of agricultural production

Directory of Open Access Journals (Sweden)

V. V. Al’t

2018-01-01

Full Text Available The modern enterprises of agrarian and industrial complex are characterized by the high level of automation of technological processes. The technological development level conformto 5th and 6th technology revolutions. The automatic and automated technologies in crop production and livestock production use data of internet technologies, Global Positioning Satellite survey and observations, mashine and tractor aggregates automated operating. The models nucleus and row of information models of agricultural objects were designed on the basis of information streams systematization. The analysis of results of simulation of biological objects, cenosises, ecosystems, agro cenosises and agroecosystems showed that the most acceptable type of model is the systemically determined dynamic model of potentially effective type. The Internet-oriented database of innovative development of institutes of an agrarian profile is designed. It contains the information about sorts, machines, mechanization means, electrification and technologies in crop production, livestock production, forage production, feed processing, crop protection, biotechnologies, mechanization, veterinary science and agricultural production processing. The database is positioned as the subject-oriented, retrieval database in web space. The list of indices to which the created architecture of the database corresponds is defined. More than 20 various databases of agricultural purpose which are used in educational process and production are created. These databases are useful to agricultural producers and also organizers of agricultural production, scientists, teachers and students. Information on key indicators of innovative products and institutes – developers of innovative solutions is provided in a basis.

Testing the limits in a greenhouse ocean: Did low nitrogen availability limit marine productivity during the end-Triassic mass extinction?

Science.gov (United States)

Schoepfer, Shane D.; Algeo, Thomas J.; Ward, Peter D.; Williford, Kenneth H.; Haggart, James W.

2016-10-01

The end-Triassic mass extinction has been characterized as a 'greenhouse extinction', related to rapid atmospheric warming and associated changes in ocean circulation and oxygenation. The response of the marine nitrogen cycle to these oceanographic changes, and the extent to which mass extinction intervals represent a deviation in nitrogen cycling from other ice-free 'greenhouse' periods of Earth history, remain poorly understood. The well-studied Kennecott Point section in Haida Gwaii, British Columbia, Canada, was deposited in the open Panthalassic Ocean, and is used here as a test case to better understand changes in the nitrogen cycle and marine productivity from the pre-crisis greenhouse of the Rhaetian to the latest-Rhaetian crisis interval. We estimated marine productivity from the late Norian to the early Hettangian using TOC- and P-based paleoproductivity transform equations, and then compared these estimates to records of sedimentary nitrogen isotopes, redox-sensitive trace elements, and biomarker data. Major negative excursions in δ15N (to ≤ 0 ‰) correspond to periods of depressed marine productivity. During these episodes, the development of a stable pycnocline below the base of the photic zone suppressed vertical mixing and limited N availability in surface waters, leading to low productivity and increased nitrogen fixation, as well as ecological stresses in the photic zone. The subsequent shoaling of euxinic waters into the ocean surface layer was fatal for most Triassic marine fauna, although the introduction of regenerated NH4+ into the photic zone may have allowed phytoplankton productivity to recover. These results indicate that the open-ocean nitrogen cycle was influenced by climatic changes during the latest Triassic, despite having existed in a greenhouse state for over 50 million years previously, and that low N availability limited marine productivity for hundreds of thousands of years during the end-Triassic crisis.

Soil types and limiting factors in agricultural production in the San Fernando district, Tamaulipas, Mexico

International Nuclear Information System (INIS)

Espinosa Ramirez, M.; Garza Cedillo, R.; Andrade limas, E.; Belmonte Serrato, F.

2009-01-01

The limiting factors in agricultural production, defined as those properties and characteristics of the geographical environment that influence the development of crops, can be diverse and are grouped with the physical environment of soil. They are the result of soil characteristics and soil degradation processes by anthropogenic influence. Due to the above, the objective of this study was to identify and surveying the limitative factors to agricultural production, as well as to define its ability land use capacity in San Fernando district, Tamaulipas. (Author) 7 refs.

Information-theoretic limitations on approximate quantum cloning and broadcasting

Science.gov (United States)

Lemm, Marius; Wilde, Mark M.

2017-07-01

We prove quantitative limitations on any approximate simultaneous cloning or broadcasting of mixed states. The results are based on information-theoretic (entropic) considerations and generalize the well-known no-cloning and no-broadcasting theorems. We also observe and exploit the fact that the universal cloning machine on the symmetric subspace of n qudits and symmetrized partial trace channels are dual to each other. This duality manifests itself both in the algebraic sense of adjointness of quantum channels and in the operational sense that a universal cloning machine can be used as an approximate recovery channel for a symmetrized partial trace channel and vice versa. The duality extends to give control of the performance of generalized universal quantum cloning machines (UQCMs) on subspaces more general than the symmetric subspace. This gives a way to quantify the usefulness of a priori information in the context of cloning. For example, we can control the performance of an antisymmetric analog of the UQCM in recovering from the loss of n -k fermionic particles.

FY 1997 survey report on information sharing product life-cycle systems. 2; 1997 nendo joho kyoyugata product life cycle system ni kansuru chosa hokokusho. 2

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

Highly value-added products considering a total life-cycle of products by integrating both production and consumption activities are much in demand, and each information corresponding to each product should be realized by concept integrating both information and product as common element. Survey was made on what a social system integrating production and consumption should be, a product information model, and technology integrating both information and product for raw material, industrial machine and household appliance as examples. An information model shared by the whole production and consumption activities was first prepared. Based on this model, data storage, update, retrieval and dispatch technologies were surveyed and developed for life-cycle systems. Degradation and life sensing technology was surveyed for maintenance, repair and disposal activities using proper unstable information of each product. A support system for use of shared information was developed to promote a new highly value-added function. Total evaluation was made on information sharing product life-cycle systems. 10 refs., 23 figs., 7 tabs.

Information Flow Scheduling in Concurrent Multi-Product Development Based on DSM

Science.gov (United States)

Sun, Qing-Chao; Huang, Wei-Qiang; Jiang, Ying-Jie; Sun, Wei

2017-09-01

Multi-product collaborative development is adopted widely in manufacturing enterprise, while the present multi-project planning models don't take technical/data interactions of multiple products into account. To decrease the influence of technical/data interactions on project progresses, the information flow scheduling models based on the extended DSM is presented. Firstly, information dependencies are divided into four types: series, parallel, coupling and similar. Secondly, different types of dependencies are expressed as DSM units, and the extended DSM model is brought forward, described as a block matrix. Furthermore, the information flow scheduling methods is proposed, which involves four types of operations, where partitioning and clustering algorithm are modified from DSM for ensuring progress of high-priority project, merging and converting is the specific computation of the extended DSM. Finally, the information flow scheduling of two machine tools development is analyzed with example, and different project priorities correspond to different task sequences and total coordination cost. The proposed methodology provides a detailed instruction for information flow scheduling in multi-product development, with specially concerning technical/data interactions.

Sales effects of product health information at points of purchase: a systematic review.

Science.gov (United States)

van 't Riet, Jonathan

2013-03-01

Information about healthy and unhealthy nutrients is increasingly conveyed at the point of purchase. Many studies have investigated the effects of product health information on attitudes and intentions, but the empirical evidence becomes sketchier when the focus of research is actual purchase behaviour. The present paper provides an overview of empirical evidence on the effectiveness of product health information for food products at the point of purchase. A systematic literature review was conducted. Only studies were included that assessed the effect of product health information at the point of purchase on actual purchase behaviour, using data provided by stores' sales records or obtained by investigating customer receipts as the primary outcome measure. The included studies' target group comprised supermarket clientele. Several studies found no significant effects of product health information on actual purchase behaviour. Interventions were more likely to be effective when they lasted for a longer time, when they included additional intervention components, and when they targeted the absence of unhealthy nutrients instead of or in addition to the presence of healthy nutrients. No strong evidence for the effectiveness of product health information was found. The effect of intervention duration, additional promotional activities and targeting of healthy v. unhealthy nutrients should be closely examined in future studies.

Nutrient limitation of primary productivity in the Southeast Pacific (BIOSOPE cruise

Directory of Open Access Journals (Sweden)

S. Bonnet

2008-02-01

Full Text Available Iron is an essential nutrient involved in a variety of biological processes in the ocean, including photosynthesis, respiration and dinitrogen fixation. Atmospheric deposition of aerosols is recognized as the main source of iron for the surface ocean. In high nutrient, low chlorophyll areas, it is now clearly established that iron limits phytoplankton productivity but its biogeochemical role in low nutrient, low chlorophyll environments has been poorly studied. We investigated this question in the unexplored southeast Pacific, arguably the most oligotrophic area of the global ocean. Situated far from any continental aerosol source, the atmospheric iron flux to this province is amongst the lowest of the world ocean. Here we report that, despite low dissolved iron concentrations (~0.1 nmol l⁻¹ across the whole gyre (3 stations located in the center and at the western and the eastern edges, primary productivity are only limited by iron availability at the border of the gyre, but not in the center. The seasonal stability of the gyre has apparently allowed for the development of populations acclimated to these extreme oligotrophic conditions. Moreover, despite clear evidence of nitrogen limitation in the central gyre, we were unable to measure dinitrogen fixation in our experiments, even after iron and/or phosphate additions, and cyanobacterial nif H gene abundances were extremely low compared to the North Pacific Gyre. The South Pacific gyre is therefore unique with respect to the physiological status of its phytoplankton populations.

7 CFR 2902.6 - Providing product information to Federal agencies.

Science.gov (United States)

2010-01-01

... manufacturers and vendors to provide product, business contacts, and product information for designated items... characteristics, including verification of such characteristics if requested. (b) Advertising, labeling and marketing claims. Manufacturers and vendors are reminded that their advertising, labeling, and other...

Some aspects of the use of contextual information in production processes

Science.gov (United States)

Has, Michael; Luidl, Christian; Schaeffner, Jochen; Klotzbuecher, Ute

1998-09-01

The production process in graphic arts can be divided in several work- or dataflows, which fundamentally differ. One deals with the creation and modification of content, i.e. photographing a scene, modifying text, retouch of pictur data, etc. The other attempts to generate, organize, and manage contextual information which can e.g. be of design, technical (screening, color definition), administrative (customer, invoice info) or product specific information (desired paperstock, finishing) character. In the paper under view those workflows are closer examined. It is shown that the creation of genres (generic product prototypes like books, flyers, etc.) may in certain cases be used to simplify both workflows. It may also be used to generate information required for both content creation (like layout) and technical purposes. The approach presented discusses a method to create a publication dependent on the information which genre is to be addressed. The concept is based on the reuse of intermediate products or of output data. For the implementation of the concept we introduce the fundamental workflows involved and an architecture containing some of the important elements required. In a final part a first overview of the implementation of the concept is given. It turns out that the job ticket, the design of the page elements and the layout are the crucial factors in a genre based production.

Software development for geologic information management system on open-pit production

Energy Technology Data Exchange (ETDEWEB)

Li, K.; Tian, A.; Ren, Z.; Pang, Y. [China University of Mining and Technomogy, Xuzhou (China). College of Mineral and Energy Resources

2001-09-01

A software, including geological data gathering and processing, deposit modelling, reserves calculating and mine map plotting, for geologic information management of open-pit production was developed. Based on the interactive technique, CAD, the object-oriented simulation, and the characteristics of geologic structures, all the geologic information databases and geologic mapping sub-systems have been established for open-pit production, planning and management. 6 refs., 1 fig.

Pollen source and resource limitation to fruit production in the rare species Eremosparton songoricum (Fabaceae)

Science.gov (United States)

Eremosparton songoricum (Litv.) Vass. is a rare, central Asian desert species which shows lower fruit set and seed set (<16%) than most hermaphroditic species. We hypothesized that fruit production was limited by pollen and resources. To evaluate potential fruit abortion due to pollen limitation, su...

40 CFR 63.5996 - How do I demonstrate initial compliance with the emission limits for tire production affected...

Science.gov (United States)

2010-07-01

... with the emission limits for tire production affected sources? 63.5996 Section 63.5996 Protection of... Pollutants: Rubber Tire Manufacturing Testing and Initial Compliance Requirements for Tire Production Affected Sources § 63.5996 How do I demonstrate initial compliance with the emission limits for tire...

Limits on heavy axion production from the reaction n(p,a)d

International Nuclear Information System (INIS)

Enghardt, W.; Kaun, K.H.; Prade, H.; Bluemlein, J.; Lanius, K.

1987-01-01

A search has been made for the creation of shortlived axions in the isovector transition n(p,a)d decaying into e + e - -pairs. The production of Peccei-Quinn axions can be excluded for 1.21 a -2 (90% CL). Limits on variant axion models are derived. (author)

Deoxynivalenol. Derivation of concentration limits in wheat and wheat containing food products

NARCIS (Netherlands)

Pieters MN; Fiolet DCM; Baars AJ; CSR

1999-01-01

The mycotoxin deoxynivalenol (DON) produced by fungi of the Fusarium genus may occur in various cereal crops. A provisional TDI of 1.1 ug per kg body weight was derived to calculate concentration limits for the mycotoxin, deoxynivalenol (DON), in wheat and wheat food products. Children (1-4 years

Use of Information, Product Innovation and Financial Performance on Belgian Glasshouse Holdings

OpenAIRE

Taragola, Nicole; Van Huylenbroeck, Guido; Van Lierde, Dirk

2002-01-01

In order to meet the changing needs and preferences of consumers it will be important for Belgian glasshouse growers to change from a production-driven to a customer-driven strategy. More than ever, use of information and product innovation become critical factors in the changing competitive environment. The aim of the research is to analyse the relationship between business and managerial characteristics, use of information sources, product innovation and financial performance of the firm. T...

40 CFR 63.5999 - How do I demonstrate initial compliance with the emission limits for tire cord production...

Science.gov (United States)

2010-07-01

... with the emission limits for tire cord production affected sources? 63.5999 Section 63.5999 Protection... Pollutants: Rubber Tire Manufacturing Testing and Initial Compliance Requirements for Tire Cord Production Affected Sources § 63.5999 How do I demonstrate initial compliance with the emission limits for tire cord...

Health information technology vendor selection strategies and total factor productivity.

Science.gov (United States)

Ford, Eric W; Huerta, Timothy R; Menachemi, Nir; Thompson, Mark A; Yu, Feliciano

2013-01-01

The aim of this study was to compare health information technology (HIT) adoption strategies' relative performance on hospital-level productivity measures. The American Hospital Association's Annual Survey and Healthcare Information and Management Systems Society Analytics for fiscal years 2002 through 2007 were used for this study. A two-stage approach is employed. First, a Malmquist model is specified to calculate hospital-level productivity measures. A logistic regression model is then estimated to compare the three HIT adoption strategies' relative performance on the newly constructed productivity measures. The HIT vendor selection strategy impacts the amount of technological change required of an organization but does not appear to have either a positive or adverse impact on technical efficiency or total factor productivity. The higher levels in technological change experienced by hospitals using the best of breed and best of suite HIT vendor selection strategies may have a more direct impact on the organization early on in the process. However, these gains did not appear to translate into either increased technical efficiency or total factor productivity during the period studied. Over a longer period, one HIT vendor selection strategy may yet prove to be more effective at improving efficiency and productivity.

Informed choice in direct-to-consumer genetic testing (DTCGT) websites: a content analysis of benefits, risks, and limitations.

Science.gov (United States)

Singleton, Amanda; Erby, Lori Hamby; Foisie, Kathryn V; Kaphingst, Kimberly A

2012-06-01

An informed choice about health-related direct-to-consumer genetic testing (DTCGT) requires knowledge of potential benefits, risks, and limitations. To understand the information that potential consumers of DTCGT services are exposed to on company websites, we conducted a content analysis of 23 health-related DTCGT websites. Results revealed that benefit statements outweighed risk and limitation statements 6 to 1. The most frequently described benefits were: 1) disease prevention, 2) consumer education, 3) personalized medical recommendations, and 4) the ability to make health decisions. Thirty-five percent of websites also presented at least one risk of testing. Seventy-eight percent of websites mentioned at least one limitation of testing. Based on this information, potential consumers might get an inaccurate picture of genetic testing which could impact their ability to make an informed decision. Practices that enhance the presentation of balanced information on DTCGT company websites should be encouraged.

Upper limits on beauty meson production in π- collisions at 280 GeV/c

International Nuclear Information System (INIS)

Badier, J.; Bourotte, J.; Mine, P.; Vanderhaghen, R.; Weisz, S.; Boucrot, J.; Callot, O.; Decamp, D.; Karyotakis, Y.; Lefrancois, J.; Crozon, M.; Delpierre, P.; Leray, T.; Maillard, J.; Tilquin, A.; Valentin, J.

1983-01-01

From events with two like-sign muons, or with three or four muons, observed in the NA3 spectrometer with 280 GeV/c incoming π - beam, we deduce upper limits on the production of beauty meson pairs Banti B. We use the leptonic branching ratios of B meson measured at CESR storage rings, and assume that no nuclear effects occur in the platinum target. We find sigma(Banti B) < 2 nb/nucleon for centrally produced Banti B pairs, and sigma(Banti B) < 10 nb/nucleon for a diffractive production. These values are one order of magnitude lower than previously published limits. As a consequence, the psipsi events observed in our experiment cannot come from Banti B decays. (orig.)

Product-oriented design theory for digital information services: A literature review.

NARCIS (Netherlands)

Wijnhoven, Alphonsus B.J.M.; Kraaijenbrink, Jeroen

2008-01-01

Purpose – The purpose of this paper is to give a structured literature review, design concepts, and research propositions related to a product-oriented design theory for information services. Information services facilitate the exchange of information goods with or without transforming these goods.

Potential and limitations of biomass production for energy purposes: Vegetable oils compared with alcohol

International Nuclear Information System (INIS)

Andrade, C.S.; Rosa, L.P.

1984-01-01

Since Brazil has favourable conditions for biomass production, as regards land mass, soil and climate, several agricultural products have been proposed as alternatives to petroleum-derived fuels. An analysis is made of the potential and limitations of energy systems using biomass production aimed at the use of vegetable oils in diesel engines compared with the experience acquired in Brazil with alcohol fuel in Otto engines. The current status of the national programme for alcohol production (PNA) within the framework of Brazilian agriculture in the last few years is presented, taking into account its objectives, achievements and impacts. Regarding vegetable oils, it must be emphasized that freight and mass passenger transport is being researched in every aspect - from the agricultural production of oleaginous plants to the use of oils in diesel engines. To assess the potential of oleaginous plant production, land needs for the years 1990 and 2000 have been estimated. From the study of some selected oleaginous plants and their potential expansion in a realistic way it was concluded that the viability of this alternative to diesel oil is limited in the short and medium term compared with alcohol, which provides better conditions for great expansion in the short term. It is believed that the option is viable, provided that it is launched gradually to avoid repeating the negative impacts that (according to some experts) were generated by PNA. (author)

17 CFR 248.10 - Limits on disclosure of nonpublic personal information to nonaffiliated third parties.

Science.gov (United States)

2010-04-01

...: Privacy of Consumer Financial Information and Safeguarding Personal Information Limits on Disclosures... customer opens an on-line account with you and agrees to receive the notices required in paragraph (a)(1) of this section electronically, and you allow the customer to opt out by any reasonable means within...

Evaluating Lignite-Derived Products (LDPs) for Agriculture - Does Research Inform Practice?

Science.gov (United States)

Patti, Antonio; Rose, Michael; Little, Karen; Jackson, Roy; Cavagnaro, Timothy

2014-05-01

Lignite-derived products (LDPs), including humic acids and organo-mineral soil conditioners, are being marketed in many parts of the world. They are promoted as plant growth stimulants, additives that improve plant nutrient uptake as well as providing humic materials to improve soil structure and combat soil degradation. There are mixed views regarding the efficacy of these products and there is a lack of scientific studies that verify the efficacy of these products in the field. Anecdotally, agricultural producers become repeat users of the products when they see economic benefits, such as increases in crop yields, while others abandon repeat use when no benefits were seen. In this paper, we present results from a literature meta-analysis1 and a number of field studies that examine the potential for LDPs to improve soil fertility and plant growth. Our findings suggest that complex interactions between LDPs, soil types, environmental conditions and plant species mean that a 'one-size fits all' product or solution is unlikely; and that changes to soil characteristics brought about by LDPs are more apparent over longer time periods than a single cropping season. Most of these studies have not been undertaken in full field trial conditions, where the crop has been grown to harvest. Limited studies in small plots or glass-house conditions often report early benefits. It is not known if these benefits persist. Moreover, the actual composition of these additives may vary significantly and is rarely specified in full. In a study of our own, a small plot experiment evaluated the effect of a single application of a commercial potassium humate product from Victorian lignite on ryegrass and lucerne grown in a sandy, nutrient deficient, low organic matter soil. Treatment resulted in increased shoot growth (up to 33%) of ryegrass during the pasture establishment phase. Root growth was also improved with a 47% increase at 0-10 cm depth and 122% increase at 10-30 cm depth

The impact of information technology on productivity using structural equations technique in Iran Behnoush Company

Directory of Open Access Journals (Sweden)

Mina Beig

2012-08-01

Full Text Available Information technology plays an important role on increasing productivity in many organizations. The primary objective of the present survey is to study the impact of information technology on productivity and find a positive and significant relationship between these two factors. Structural equations technique and LISREL software are used for analysis of the questionnaires distributed among managers and some employees of Iran Behnoush Company. Organizations try to improve their performance by investment in information technology. However, many of the previous studies indicate insignificance of the impact of information technology on productivity of the organizations. The present survey studies the impact of information technology on organizations' productivity through the collected data from the above company. Results confirm existence of a positive relationship between information technology and productivity.

Consumer preference for chicken breast may be more affected by information on organic production than by product sensory properties.

Science.gov (United States)

Napolitano, F; Castellini, C; Naspetti, S; Piasentier, E; Girolami, A; Braghieri, A

2013-03-01

Conventional chicken from a fast-growing strain (CC), organic chicken from a slow-growing strain (OSG), and organic chicken from a fast-growing strain (OFG) were used to assess descriptive sensory differences between organic and conventional breasts, to verify whether differences were perceived by consumers and to evaluate the effect of information about organic production on liking. A conventional quantitative-descriptive analysis was performed by a trained panel of 10 members on breast slices (1 cm thick) grilled at 300°C. A 150-member consumer panel (from southern, central, and northern Italy) rated CC, OSG, and OFG breasts according to 3 types of evaluation: tasting without information (perceived liking), information without tasting (expected liking), and tasting with information (actual liking). Breasts from different sources were clearly discriminated by the trained panel as meat from CC was perceived more tender than OFG (P consumers for perceived liking. However, consumer expected liking scores were higher for organic than for conventional products (P consumers were not. However, consumer liking was markedly affected by the information given on the organic production system, thus providing a tool to differentiate the product in an increasingly competitive market.

Final Progress Report on Model-Based Diagnosis of Soil Limitations to Forest Productivity

Energy Technology Data Exchange (ETDEWEB)

Luxmoore, R.J.

2004-08-30

This project was undertaken in support of the forest industry to link modeling of nutrients and productivity with field research to identify methods for enhancing soil quality and forest productivity and for alleviating soil limitations to sustainable forest productivity. The project consisted of a series of related tasks, including (1) simulation of changes in biomass and soil carbon with nitrogen fertilization, (2) development of spreadsheet modeling tools for soil nutrient availability and tree nutrient requirements, (3) additional modeling studies, and (4) evaluation of factors involved in the establishment and productivity of southern pine plantations in seasonally wet soils. This report also describes the two Web sites that were developed from the research to assist forest managers with nutrient management of Douglas-fir and loblolly pine plantations.

LDPC product coding scheme with extrinsic information for bit patterned media recoding

Science.gov (United States)

Jeong, Seongkwon; Lee, Jaejin

2017-05-01

Since the density limit of the current perpendicular magnetic storage system will soon be reached, bit patterned media recording (BPMR) is a promising candidate for the next generation storage system to achieve an areal density beyond 1 Tb/in2. Each recording bit is stored in a fabricated magnetic island and the space between the magnetic islands is nonmagnetic in BPMR. To approach recording densities of 1 Tb/in2, the spacing of the magnetic islands must be less than 25 nm. Consequently, severe inter-symbol interference (ISI) and inter-track interference (ITI) occur. ITI and ISI degrade the performance of BPMR. In this paper, we propose a low-density parity check (LDPC) product coding scheme that exploits extrinsic information for BPMR. This scheme shows an improved bit error rate performance compared to that in which one LDPC code is used.

Investments in product innovation using information technology : lessons from the financial services sector

NARCIS (Netherlands)

Deitz, R.M.H.

1993-01-01

Product innovation using information technology (IT) represents a very interesting object of study from an economic point of view. The existing company-information infrastructure offers numerous opportunities but also risks for product-innovation. Opportunities occur when existing or future systems

Nitrogen and carbon limitation of planktonic primary production and phytoplankton–bacterioplankton coupling in ponds on the McMurdo Ice Shelf, Antarctica

International Nuclear Information System (INIS)

Sorrell, Brian K; Safi, Karl; Hawes, Ian

2013-01-01

We compared planktonic primary and secondary production across twenty meltwater ponds on the surface of the McMurdo Ice Shelf in January 2007, including some ponds with basal brines created by meromictic stratification. Primary production ranged from 1.07 to 65.72 mgC m −3 h −1 in surface waters. In stratified ponds primary production was always more than ten times higher in basal brines than in the corresponding mixolimnion. Regression tree analysis (r 2 = 0.80) identified inorganic nitrogen (as NH 4 + ) as the main factor limiting planktonic primary production. However, there was also evidence of inorganic carbon co-limitation of photosynthesis in some of the more oligotrophic waters. Neither C nor N limited carbon fixation at [NH 4 –N] > 50 mg m −3 , with photoinhibition the factor most likely limiting photosynthesis under such conditions. Primary production was the only factor significantly correlated to bacterial production and the relationship (r 2 = 0.56) was non-linear. Nitrogen limitation and tight coupling of planktonic primary and bacterial production is surprising in these ponds, as all have large pools of dissolved organic carbon (1.2–260 g m −3 ) and organic nitrogen (all >130 mg m −3 ). The dissolved pools of organic carbon and nitrogen appear to be recalcitrant and bacterial production to be constrained by limited release of labile organics from phytoplankton. (letter)

The role of production process and information on quality expectations and perceptions of sparkling wines.

Science.gov (United States)

Vecchio, Riccardo; Lisanti, Maria Tiziana; Caracciolo, Francesco; Cembalo, Luigi; Gambuti, Angelita; Moio, Luigi; Siani, Tiziana; Marotta, Giuseppe; Nazzaro, Concetta; Piombino, Paola

2018-05-28

The present research aims to analyse, by combining sensory and experimental economics techniques, to what extent production process, and the information about it, may affect consumer preferences. Sparkling wines produced by Champenoise and Charmat methods were the object of the study. A quantitative descriptive sensory analysis with a trained panel and non-hypothetical auctions combined with hedonic ratings involving young wine consumers (N=100), under different information scenarios(Blind, Info and Info Taste), were performed. Findings show that the production process impacts both the sensory profile of sparkling wines and consumer expectations. In particular, the hedonic ratings revealed that when tasting the products, both with no information on the production process (Blind) and with such information (Info Taste), the consumers preferred the Charmat wines. On the contrary, when detailed information on the production methods was given without tasting (Info), consumers liked more the two Champenoise wines. It can be concluded that sensory and non-sensory attributes of sparkling wines affect consumers' preferences. Specifically, the study suggests that production process information strongly impacts liking expectations, while not affecting informed liking. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

Industry sector analysis, Mexico: Electric power production and distribution equipment. Export Trade Information

International Nuclear Information System (INIS)

Wood, J.S.; Miller, R.W.

1988-09-01

The Industry Sector Analyses (I.S.A.) for electric power production and distribution equipment contains statistical and narrative information on projected market demand, end-users, receptivity of Mexican consumers to U.S. products, the competitive situation - Mexican production, total import market, U.S. market position, foreign competition, and competitive factors, and market access - Mexican tariffs, non-tariff barriers, standards, taxes and distribution channels. The I.S.A. provides the United States industry with meaningful information regarding the Mexican market for electric power production and distribution equipment

The Bivalve Production Chain in Santa Catarina, Brazil, and its Management and Operational Limitations

OpenAIRE

Gallon, Alessandra Vasconcelos; Universidade Federal do Ceará (UFC); Nascimento, Cristiano; Universidade Federal do Paraná - UFPR; Pfitscher, Elisete Dahmer; Universidade Federal de Santa Catarina

2011-01-01

Bivalve farming (mussels and oysters), a major component in the socio-economic development of the state of Santa Catarina, Brazil, combines the activities of public and private agencies in fish farming. Current analysis deals with the management and the operational limitations of the local bivalve production chain. Current exploratory research, undertaken by direct observations and the literature on the subject, employs data quality. Results show that the bivalve production chain, comprising ...

On the semi-classical limit of scalar products of the XXZ spin chain

Energy Technology Data Exchange (ETDEWEB)

Jiang, Yunfeng; Brunekreef, Joren [Institut für Theoretische Physik, ETH Zürich,Wolfgang Pauli Strasse 27, CH-8093 Zürich (Switzerland)

2017-03-03

We study the scalar products between Bethe states in the XXZ spin chain with anisotropy |Δ|>1 in the semi-classical limit where the length of the spin chain and the number of magnons tend to infinity with their ratio kept finite and fixed. Our method is a natural yet non-trivial generalization of similar methods developed for the XXX spin chain. The final result can be written in a compact form as a contour integral in terms of Faddeev’s quantum dilogarithm function, which in the isotropic limit reduces to the classical dilogarithm function.

On the semi-classical limit of scalar products of the XXZ spin chain

International Nuclear Information System (INIS)

Jiang, Yunfeng; Brunekreef, Joren

2017-01-01

We study the scalar products between Bethe states in the XXZ spin chain with anisotropy |Δ|>1 in the semi-classical limit where the length of the spin chain and the number of magnons tend to infinity with their ratio kept finite and fixed. Our method is a natural yet non-trivial generalization of similar methods developed for the XXX spin chain. The final result can be written in a compact form as a contour integral in terms of Faddeev’s quantum dilogarithm function, which in the isotropic limit reduces to the classical dilogarithm function.

75 FR 16819 - Notice of Proposed Information Collection for Public Comment Civil Rights Front End and Limited...

Science.gov (United States)

2010-04-02

... Information Collection for Public Comment Civil Rights Front End and Limited Monitoring Review AGENCY: Office... Office of Management and Budget (OMB) for review, as required by the Paperwork Reduction Act. The...-free Federal Information Relay Service at 800-877-8339. (Other than the HUD USER information line and...

Health-related ad information and health motivation effects on product evaluations

DEFF Research Database (Denmark)

Chrysochou, Polymeros; Grunert, Klaus G

2014-01-01

This study tests the effect of health-related ad information on perceived product healthfulness and purchase intention. Also, the study investigates whether consumers' health motivation moderates the effects, because of the way health motivation affects processing of health-related information...... in ads. Three types of healthrelated ad elements are distinguished: functional claims, process claims and health imagery. These elements were combined in mock ads and an online experiment was run to test the study hypotheses. Results show that health imagery has the largest impact on consumers' product...

New legal requirements for submission of product information to poisons centres in EU member states.

Science.gov (United States)

de Groot, Ronald; Brekelmans, Pieter; Desel, Herbert; de Vries, Irma

2018-01-01

In the past eight years, the European Association of Poisons Centres and Clinical Toxicologists (EAPCCT) has been intensively involved in a European Commission led process to develop EU legislation on the information of hazardous products that companies have to notify to EU Poisons Centres (or equivalent "appointed bodies"). As a result of this process, the Commission adopted Regulation (EU) No 2017/542, amending the CLP Regulation by adding an Annex on harmonised product submission requirements. Harmonised mixture information requirements: Detailed and consistent information on the composition of the hazardous product will become available to EU Poisons Centres (PC). The information will be submitted by companies to PCs (or equivalent "appointed bodies") using a web-based software application or in-house software. Two new important features are introduced. Firstly, to be able to rapidly identify the product formula, a Unique Formula Identifier (UFI) on the product label links to the submitted information. Secondly, for better comparability of reports on poisonings between EU member states, a harmonised Product Categorisation System will specify the intended use of a product. Rapid product identification and availability of detailed composition information will lead to timely and adequate medical intervention. This may lead to considerable reduction in healthcare costs. Additionally, for companies trading across the EU, costs of submission of this information will be reduced significantly. Next steps: From 2017, an implementation period has started, consisting of a three-year period for stakeholders to implement the new requirements, followed by a gradual applicability for consumer products (2020), professional products (2021) and industrial use-only products (2024). Technical tools to generate the electronic format and the UFI together with guidance documents are expected to be made available by the end of 2017 by the European Chemicals Agency (ECHA). Guidance on

LDPC product coding scheme with extrinsic information for bit patterned media recoding

Directory of Open Access Journals (Sweden)

Seongkwon Jeong

2017-05-01

Full Text Available Since the density limit of the current perpendicular magnetic storage system will soon be reached, bit patterned media recording (BPMR is a promising candidate for the next generation storage system to achieve an areal density beyond 1 Tb/in2. Each recording bit is stored in a fabricated magnetic island and the space between the magnetic islands is nonmagnetic in BPMR. To approach recording densities of 1 Tb/in2, the spacing of the magnetic islands must be less than 25 nm. Consequently, severe inter-symbol interference (ISI and inter-track interference (ITI occur. ITI and ISI degrade the performance of BPMR. In this paper, we propose a low-density parity check (LDPC product coding scheme that exploits extrinsic information for BPMR. This scheme shows an improved bit error rate performance compared to that in which one LDPC code is used.

Information and knowledge flows in product development of automotive industry – a comparison between formal and informal networks

Directory of Open Access Journals (Sweden)

Renelson Ribeiro Sampaio

2013-03-01

Full Text Available To maintain competitive advantage, companies must innovate. Thus, high quality, low cost and diversity of products became the starting condition for competitiveness. As a result, speed and flexibility in the design of new products are crucial, as these factors are related to the ability of companies to respond adequately to the pressures from the market. Innovation is usually related to the introduction of something new in a particular work process, which lead to new products or services. The ability for people to share information is then to be seen as a factor of strengthening of the work processes in order to contribute substantially to the company's competitive advantage in this new context. Considering these aspects, this paper seeks to map the processes of product development for an automobile company, analyzing and mapping the flow of information. The main contribution of this study is the critical analysis of social network established in a time of development of a project. This analysis provides an estimate of the level of diffusion of information and knowledge among team members, as well as the comparison between social networking and formal network mapped empirically defined a priori in the company's written procedures.

A Firm Level Study of Information Technology Productivity in Europe Using Financial and Market Based Measures

Directory of Open Access Journals (Sweden)

Alan Peslak

2004-05-01

Full Text Available For many years, business has invested significant resources in information technology, hardware, software, and manpower. The Productivity Paradox is the seeming lack of productivity gains despite the increased investment in IT. For many years the existence of a Productivity Paradox has been the subject of research interest. Conflicting results have been obtained from a variety of data sets. Until this time however there has been no study that has investigated European companies’ use of information technology and its impact on productivity. The objective of this study was to investigate information technology productivity with a new data set from a European published source, and measuring productivity using both market and financial based measures. Results of the study indicated that information technology did have a consistent positive impact on firm level productivity in Europe for the years 1996, 1997, and 1998. Both market and financial based productivity measures provided consistent positive significant returns with regard to IT productivity. The major contribution of the study is that it provides an analysis of the impact of European information technology on firm and economic productivity.

Increasing water productivity of irrigated crops under limited water supply at field scale

NARCIS (Netherlands)

Vazifedoust, M.; Dam, van J.C.; Feddes, R.A.; Feizi, M.

2008-01-01

Borkhar district is located in an and to semi-arid region in Iran and regularly faces widespread drought. Given current water scarcity, the limited available water should be used as efficient and productive as possible. To explore on-farm strategies which result in higher economic gains and water

A product lifecycle management framework to support the exchange of prototyping and testing information

Science.gov (United States)

Toche Fumchum, Luc Boris

2011-12-01

The modern perspective on product life cycle and the rapid evolution of Information and Communication Technologies in general have opened a new era in product representation and product information sharing between participants, both inside and outside the enterprise and throughout the product life. In particular, the Product Development Process relies on cross-functional activities involving different domains of expertise that each have their own dedicated tools. This has generated new challenges in terms of collaboration and dissemination of information at large between companies or even within the same organization. Within this context, the work reported herein focuses on a specific stakeholder within product development activities - the prototyping and testing department. Its business is typically related to the planning and building of prototypes in order to perform specific tests on the future product or one of its sub-assemblies. The research project aims at investigating an appropriate framework that leverages configured engineering product information, based on complementary information structures, to share and exchange prototyping and testing information in a Product Lifecycle Management (PLM) perspective. As a first step, a case study based on the retrofit of an aircraft engine is deployed to implement a scenario demonstrating the functionalities to be available within the intended framework. For this purpose, complementary and configurable structures are simulated within the project's PLM system. In a second step are considered the software interoperability issues that don't only affect Design -- Testing interactions, but many other interfaces within either the company -- due to the silo-arrangement -- or the consortiums with partners, in which case the whole PLM platforms could simply be incompatible. A study based on an open source initiative and relying on an improved model of communication is described to show how two natively disparate PLM tools can

Baryon production and the centrality dependence of limiting fragmentation in heavy ion collision

International Nuclear Information System (INIS)

Mondal, M.M.; Chattopadhyay, S.

2006-01-01

In experiments with the relativistic heavy ion collisions the primary goals is to study the particle distribution in pseudorapidity variable. From the study of the distribution information of the collision mechanism such as the study of hypothesis of limiting fragmentation can be made

Cocoa butter-like lipid production ability of non-oleaginous and oleaginous yeasts under nitrogen-limited culture conditions

DEFF Research Database (Denmark)

Wei, Yongjun; Siewers, Verena; Nielsen, Jens

2017-01-01

Cocoa butter (CB) extracted from cocoa beans is the main raw material for chocolate production. However, growing chocolate demands and limited CB production has resulted in a shortage of CB supply. CB is mainly composed of three different kinds of triacylglycerols (TAGs), POP (C16:0–C18:1–C16......, Saccharomyces cerevisiae CEN.PK113-7D, and five oleaginous yeast strains, Trichosporon oleaginosus DSM11815, Rhodotorula graminis DSM 27356, Lipomyces starkeyi DSM 70296, Rhodosporidium toruloides DSM 70398, and Yarrowia lipolytica CBS 6124, in nitrogen-limited medium and compared their CBL production ability...... and POS at levels of 378 mg TAGs/g dry cell weight, hinting that this yeast may have potential as a CBL production host after further metabolic engineering in future....

Information paradox of new product development: A case of decision-makers' focus of attention

DEFF Research Database (Denmark)

Jespersen, Kristina Risom

Drawing on theory of bounded rationality and the attention-based view of the company, decision-makers' focus of attention is examined within the new product development process. Attention, defined as something which occupies individual consciousness, should be directed at selecting development...... activities and applying information resulting from these activities to go/no-go decision-making. Based on the information behavior of 42 development managers collected through a virtual role-play simulation of new product development, this research finds two information paradoxes of new product development....... First, competitive behavior makes decision-makers apply logic of reassurances in their implementation of NPD activities. Second, the information processing competence of decision-makers is unbalanced as information increases uncertainty in the concrete decision-making situation....

40 CFR Table 1 to Subpart C - VOC Content Limits by Product Category

Science.gov (United States)

2010-07-01

... (weight-percent VOC) Air fresheners: Single-phase 70 Double-phase 30 Liquids/pump sprays 18 Solids/gels 3... 40 Protection of Environment 5 2010-07-01 2010-07-01 false VOC Content Limits by Product Category 1 Table 1 to Subpart C Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR...

Dynamic Evolution with Limited Learning Information on a Small-World Network

International Nuclear Information System (INIS)

Dong Linrong

2010-01-01

This paper investigates the dynamic evolution with limited learning information on a small-world network. In the system, the information among the interaction players is not very lucid, and the players are not allowed to inspect the profit collected by its neighbors, thus the focal player cannot choose randomly a neighbor or the wealthiest one and compare its payoff to copy its strategy. It is assumed that the information acquainted by the player declines in the form of the exponential with the geographical distance between the players, and a parameter V is introduced to denote the inspect-ability about the players. It is found that under the hospitable conditions, cooperation increases with the randomness and is inhibited by the large connectivity for the prisoner's dilemma; however, cooperation is maximal at the moderate rewiring probability and is chaos with the connectivity for the snowdrift game. For the two games, the acuminous sight is in favor of the cooperation under the hospitable conditions; whereas, the myopic eyes are advantageous to cooperation and cooperation increases with the randomness under the hostile condition. (interdisciplinary physics and related areas of science and technology)

Information Technology in Small Medium Enterprise: Logistic and Production Processes

Directory of Open Access Journals (Sweden)

Maurizio Pighin

2017-01-01

Full Text Available This paper presents and discuss a survey which describes how small-medium enterprises (SMEs implement and use their information system with respect to their logistic and production processes. The study first describes the rationale of the research, then it identifies the characteristics of the companies and detects their general attitude towards information technology (IT. In the following section the paper presents a set of detailed processes to verify the structure and workflow of companies and how IT supports their processes. In the last part we study the influence of some company characteristics to effective use of processes and to different technological approaches, to support defined logistic and production processes. The novelty of the study and its interest, both in academic and institutional context as in the real world, resides in the opportunity to verify and understand the different attitudes of SMEs towards information technology in defining, organizing, planning and control their processes.

US adult tobacco users' absolute harm perceptions of traditional and alternative tobacco products, information-seeking behaviors, and (mis)beliefs about chemicals in tobacco products.

Science.gov (United States)

Bernat, Jennifer K; Ferrer, Rebecca A; Margolis, Katherine A; Blake, Kelly D

2017-08-01

Harm perceptions about tobacco products may influence initiation, continued use, and cessation efforts. We assessed associations between adult traditional tobacco product use and absolute harm perceptions of traditional and alternative tobacco products. We also described the topics individuals looked for during their last search for information, their beliefs about chemicals in cigarettes/cigarette smoke, and how both relate to harm perceptions. We ran multivariable models with jackknife replicate weights to analyze data from the 2015 administration of the National Cancer Institute's Health Information National Trends Survey (N=3376). Compared to never users, individuals reported lower perceived levels of harm for products they use. Among current tobacco users, ethnicity, thinking about chemicals in tobacco, and information-seeking were all factors associated with tobacco product harm perceptions. In the full sample, some respondents reported searching for information about health effects and cessation and held misperceptions about the source of chemicals in tobacco. This study fills a gap in the literature by assessing the absolute harm perceptions of a variety of traditional and alternative tobacco products. Harm perceptions vary among tobacco products, and the relationship among tobacco use, information seeking, thoughts about chemicals in tobacco products, and harm perceptions is complex. Data suggest that some individuals search for information about health effects and cessation and hold misperceptions about chemicals in tobacco products. Future inquiry could seek to understand the mechanisms that contribute to forming harm perceptions and beliefs about chemicals in tobacco products. Published by Elsevier Ltd.

Fisher Information and the Quantum Cramér-Rao Sensitivity Limit of Continuous Measurements

DEFF Research Database (Denmark)

Gammelmark, Søren; Mølmer, Klaus

2014-01-01

Precision measurements with quantum systems rely on our ability to trace the differences between experimental signals to variations in unknown physical parameters. In this Letter we derive the Fisher information and the ensuing Cramér-Rao sensitivity limit for parameter estimation by continuous...

Fed-batch fermentation dealing with nitrogen limitation in microbial transglutaminase production by Streptoverticillium mobaraense

NARCIS (Netherlands)

Rinzema, A; Tramper, J; de Bruin, E; Bol, J

In the later stages of a batch fermentation for microbial transglutaminase production by Streptoverticillium mobaraense the availability of a nitrogen source accessible to the microorganism becomes critical. Fed-batch fermentation is investigated with the aim of avoiding this substrate limitation.

Production Planning and Planting Pattern Scheduling Information System for Horticulture

Science.gov (United States)

Vitadiar, Tanhella Zein; Farikhin; Surarso, Bayu

2018-02-01

This paper present the production of planning and planting pattern scheduling faced by horticulture farmer using two methods. Fuzzy time series method use to predict demand on based on sales amount, while linear programming is used to assist horticulture farmers in making production planning decisions and determining the schedule of cropping patterns in accordance with demand predictions of the fuzzy time series method, variable use in this paper is size of areas, production advantage, amount of seeds and age of the plants. This research result production planning and planting patterns scheduling information system with the output is recommendations planting schedule, harvest schedule and the number of seeds will be plant.

Photorespiration and carbon limitation determine productivity in temperate seagrasses.

Science.gov (United States)

Buapet, Pimchanok; Rasmusson, Lina M; Gullström, Martin; Björk, Mats

2013-01-01

The gross primary productivity of two seagrasses, Zostera marina and Ruppia maritima, and one green macroalga, Ulva intestinalis, was assessed in laboratory and field experiments to determine whether the photorespiratory pathway operates at a substantial level in these macrophytes and to what extent it is enhanced by naturally occurring shifts in dissolved inorganic carbon (DIC) and O2 in dense vegetation. To achieve these conditions in laboratory experiments, seawater was incubated with U. intestinalis in light to obtain a range of higher pH and O2 levels and lower DIC levels. Gross photosynthetic O2 evolution was then measured in this pretreated seawater (pH, 7.8-9.8; high to low DIC:O2 ratio) at both natural and low O2 concentrations (adjusted by N2 bubbling). The presence of photorespiration was indicated by a lower gross O2 evolution rate under natural O2 conditions than when O2 was reduced. In all three macrophytes, gross photosynthetic rates were negatively affected by higher pH and lower DIC. However, while both seagrasses exhibited significant photorespiratory activity at increasing pH values, the macroalga U. intestinalis exhibited no such activity. Rates of seagrass photosynthesis were then assessed in seawater collected from the natural habitats (i.e., shallow bays characterized by high macrophyte cover and by low DIC and high pH during daytime) and compared with open baymouth water conditions (where seawater DIC is in equilibrium with air, normal DIC, and pH). The gross photosynthetic rates of both seagrasses were significantly higher when incubated in the baymouth water, indicating that these grasses can be significantly carbon limited in shallow bays. Photorespiration was also detected in both seagrasses under shallow bay water conditions. Our findings indicate that natural carbon limitations caused by high community photosynthesis can enhance photorespiration and cause a significant decline in seagrass primary production in shallow waters.

Photorespiration and carbon limitation determine productivity in temperate seagrasses.

Directory of Open Access Journals (Sweden)

Pimchanok Buapet

Full Text Available The gross primary productivity of two seagrasses, Zostera marina and Ruppia maritima, and one green macroalga, Ulva intestinalis, was assessed in laboratory and field experiments to determine whether the photorespiratory pathway operates at a substantial level in these macrophytes and to what extent it is enhanced by naturally occurring shifts in dissolved inorganic carbon (DIC and O2 in dense vegetation. To achieve these conditions in laboratory experiments, seawater was incubated with U. intestinalis in light to obtain a range of higher pH and O2 levels and lower DIC levels. Gross photosynthetic O2 evolution was then measured in this pretreated seawater (pH, 7.8-9.8; high to low DIC:O2 ratio at both natural and low O2 concentrations (adjusted by N2 bubbling. The presence of photorespiration was indicated by a lower gross O2 evolution rate under natural O2 conditions than when O2 was reduced. In all three macrophytes, gross photosynthetic rates were negatively affected by higher pH and lower DIC. However, while both seagrasses exhibited significant photorespiratory activity at increasing pH values, the macroalga U. intestinalis exhibited no such activity. Rates of seagrass photosynthesis were then assessed in seawater collected from the natural habitats (i.e., shallow bays characterized by high macrophyte cover and by low DIC and high pH during daytime and compared with open baymouth water conditions (where seawater DIC is in equilibrium with air, normal DIC, and pH. The gross photosynthetic rates of both seagrasses were significantly higher when incubated in the baymouth water, indicating that these grasses can be significantly carbon limited in shallow bays. Photorespiration was also detected in both seagrasses under shallow bay water conditions. Our findings indicate that natural carbon limitations caused by high community photosynthesis can enhance photorespiration and cause a significant decline in seagrass primary production in shallow

40 CFR Table 2 to Subpart Xxxx of... - Emission Limits for Tire Cord Production Affected Sources

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 12 2010-07-01 2010-07-01 true Emission Limits for Tire Cord Production Affected Sources 2 Table 2 to Subpart XXXX of Part 63 Protection of Environment ENVIRONMENTAL... Manufacturing Pt. 63, Subpt. XXXX, Table 2 Table 2 to Subpart XXXX of Part 63—Emission Limits for Tire Cord...

75 FR 32160 - Certain Hot-Rolled Flat-Rolled Carbon-Quality Steel Products from Brazil: Extension of Time Limit...

Science.gov (United States)

2010-06-07

...-Rolled Carbon-Quality Steel Products from Brazil: Extension of Time Limit for Preliminary Results of...-quality steel products from Brazil. See Agreement Suspending the Countervailing Duty Investigation on Hot... duty order on certain hot-rolled flat-rolled carbon-quality steel products from Brazil. See Initiation...

Limitations in Production and Stocks and their Effect on the Profitability of the Slaughterhouses

DEFF Research Database (Denmark)

Kjærsgaard, Niels Christian

The pig industry is important for the Danish economy with an export value of more than DKK 28 billions in 2006 [Danish Meat Association (2007)] and the competition is increasing. Therefore it is more important than ever to optimize all aspects of Danish pig production, slaughtering processes...... and delivery. The cost of logistical limitations in the equalization room has been estimated to DKK 0.072 per kg or approximately DKK 145 million per year in total for the Danish slaughterhouses The main conclusion is that even relatively simple optimization models can be used to improve the basis...... of the slaughterhouses for decision making considerably, both regarding computing the costs of having limitations in the production as well as the value of improved measurements and increased slaughter weight. Prices vary from one week to another, and consequently a price and cost study should be performed before...

Does Online Information Drive Offline Revenues? Only for Specific Products and Consumer Segments!

NARCIS (Netherlands)

Pauwels, Keen; Leeflang, Peter S. H.; Teerling, Marije L.; Huizingh, K. R. Eelko

While many offline retailers have developed informational websites that offer information on products and prices, the key question for such informational websites is whether they can increase revenues via web-to-store shopping. The current paper draws on the information search literature to specify

Production (information sheets)

NARCIS (Netherlands)

2007-01-01

Documentation sheets: Geo energy 2 Integrated System Approach Petroleum Production (ISAPP) The value of smartness 4 Reservoir permeability estimation from production data 6 Coupled modeling for reservoir application 8 Toward an integrated near-wellbore model 10 TNO conceptual framework for "E&P

The productivity effect of informal employees: The Tshwane tyre-fitting industry as a case study

Directory of Open Access Journals (Sweden)

Gerhardus van Zyl

2011-09-01

Research purpose: The aim of the article was to estimate the sign and magnitude of productivity spill over effects of informal employees when employee and firm characteristics as well as external factors were considered. Motivation for the study: The researcher thought that empirical research was appropriate because of the belief that, because of low productivity levels in the South African workplace, firms are resorting to greater numbers of informal employees in order to generate positive productivity spill over effects that would improve their levels of competitiveness. Research design, approach and methodology: The researcher constructed real data series on the applicable variables from weekly data that he collected from firms in the sample group over the sample period. He then applied the Nelen, de Grip and Fourage estimation model to determine the sign and magnitude of the spill over effects for the different employee segments. Main findings: The informal employee segment created greater positive productivity spill over effects. This was especially true for older informal employees with longer tenures and lower levels of absenteeism. External factors, like variations in market demand, improved the positive spill over effects that informal employees generated. Practical/managerial implications: Firms might reconsider the composition of their workforce if the informal employee segment consistently generated higher positive productivity spill over effects. Contribution/value-add: The researcher has introduced an estimation procedure that firms can apply to measure the productivity spill over effects of formal and informal employee segments at firm and industry level.

Chemical Emissions of Residential Materials and Products: Review of Available Information

Energy Technology Data Exchange (ETDEWEB)

Willem, Henry; Singer, Brett

2010-09-15

This report is prepared in the context of a larger program whose mission is to advance understanding of ventilation and indoor air quality in U.S. homes. A specific objective of this program is to develop the scientific basis ? through controlled experiments, monitoring and analysis ? for health risk-based ventilation standards. Appropriate and adequate ventilation is a basic element of a healthy home. Ventilation provides outdoor air and in the process removes indoor odors and contaminants including potentially unhealthful chemicals emitted by indoor materials, products and activities. Ventilation traditionally was assured to occur via infiltration of outdoor air through cracks and other leakage pathways in the residential building envelope. As building air tightness is improved for energy efficiency, infiltration can be reduced to inadequate levels. This has lead to the development of standards requiring mechanical ventilation. Though nominally intended to ensure acceptable indoor air quality, the standards are not explicitly tied to health risk or pollutant exposure targets. LBNL is currently designing analyses to assess the impact of varying ventilation standards on pollutant concentrations, health risks and energy use. These analyses require information on sources of chemical pollutant emissions, ideally including emission rates and the impact of ventilation on emissions. Some information can be obtained from recent studies that report measurements of various air contaminants and their concentrations in U.S. residences. Another way to obtain this information is the bottom-up approach of collecting and evaluating emissions data from construction and interior materials and common household products. This review contributes to the latter approach by summarizing available information on chemical emissions from new residential products and materials. We review information from the scientific literature and public sources to identify and discuss the databases that

A vector-product information retrieval system adapted to heterogeneous, distributed computing environments

Science.gov (United States)

Rorvig, Mark E.

1991-01-01

Vector-product information retrieval (IR) systems produce retrieval results superior to all other searching methods but presently have no commercial implementations beyond the personal computer environment. The NASA Electronic Library Systems (NELS) provides a ranked list of the most likely relevant objects in collections in response to a natural language query. Additionally, the system is constructed using standards and tools (Unix, X-Windows, Notif, and TCP/IP) that permit its operation in organizations that possess many different hosts, workstations, and platforms. There are no known commercial equivalents to this product at this time. The product has applications in all corporate management environments, particularly those that are information intensive, such as finance, manufacturing, biotechnology, and research and development.

Readiness for the next generation of information competence in new product development

DEFF Research Database (Denmark)

Jespersen, Kristina Risom; Søndergaard, Helle Alsted

2007-01-01

Readiness for information methods like communities, simulation and virtual worlds in new product development (NPD) is discussed based on analysis of NPD strategy, market orientation and competitive pressure as generic antecedents of exploitative and explorative information search. The paper...... forwards evolvement as new information competence to leverage holistic information methods, and finds that current information competences of decision-makers are not ready to leverage new information methods enable by technology. Data is collected with an agent-based simulation platform and logistic...

Some Comments on Marketing AIP Information Products and Services.

Science.gov (United States)

King, Donald W.; Brown, A. M.

This study was addressed to marketing considerations for the American Institute of Physics (AIP) information products and services. The general system and its operation in a marketing environment, including promotion, channels of distribution and pricing are covered. Particular emphasis is placed on the cost/demand/price relationship for four…

Limit on the Two-Photon Production of the Glueball Candidate fJ(2220) at the Cornell Electron Storage Ring

International Nuclear Information System (INIS)

Godang, R.; Kinoshita, K.; Lai, I.C.; Pomianowski, P.; Schrenk, S.; Bonvicini, G.; Cinabro, D.; Greene, R.; Perera, L.P.; Zhou, G.J.; Barish, B.; Chadha, M.; Chan, S.; Eigen, G.; Miller, J.S.; OGrady, C.; Schmidtler, M.; Urheim, J.; Weinstein, A.J.; Wuerthwein, F.; Asner, D.M.; Bliss, D.W.; Brower, W.S.; Masek, G.; Paar, H.P.; Prell, S.; Sivertz, M.; Sharma, V.; Gronberg, J.; Hill, T.S.; Kutschke, R.; Lange, D.J.; Menary, S.; Morrison, R.J.; Nelson, H.N.; Nelson, T.K.; Qiao, C.; Richman, J.D.; Roberts, D.; Ryd, A.; Witherell, M.S.; Balest, R.; Behrens, B.H.; Cho, K.; Ford, W.T.; Park, H.; Rankin, P.; Roy, J.; Smith, J.G.; Alexander, J.P.; Bebek, C.; Berger, B.E.; Berkelman, K.; Bloom, K.; Cassel, D.G.; Cho, H.A.; Coffman, D.M.; Crowcroft, D.S.; Dickson, M.; Drell, P.S.; Ecklund, K.M.; Ehrlich, R.; Elia, R.; Foland, A.D.; Gaidarev, P.; Galik, R.S.; Gittelman, B.; Gray, S.W.; Hartill, D.L.; Heltsley, B.K.; Hopman, P.I.; Kandaswamy, J.; Katayama, N.; Kim, P.C.; Kreinick, D.L.; Lee, T.; Liu, Y.; Ludwig, G.S.; Masui, J.; Mevissen, J.; Mistry, N.B.; Ng, C.R.; Nordberg, E.; Ogg, M.; Patterson, J.R.; Peterson, D.; Riley, D.; Soffer, A.; Ward, C.; Athanas, M.; Avery, P.; Jones, C.D.; Lohner, M.; Prescott, C.; Yelton, J.; Zheng, J.; Brandenburg, G.; Briere, R.A.; Gao, Y.S.; Kim, D.Y.; Wilson, R.; Yamamoto, H.

1997-01-01

We use the CLEO detector at the Cornell e + e - storage ring, CESR, to search for the two-photon production of the glueball candidate f J (2220) in its decay to K s K s . We present a restrictive upper limit on the product of the two-photon partial width and the K s K s branching fraction, (Γ γγ B K s K s ) f J(2220) . We use this limit to calculate a lower limit on the stickiness, which is a measure of the two-gluon coupling relative to the two-photon coupling. This limit on stickiness indicates that the f J (2220) has substantial glueball content. copyright 1997 The American Physical Society

Sources of Information as Determinants of Product and Process Innovation

OpenAIRE

G?mez, Jaime; Salazar, Idana; Vargas, Pilar

2016-01-01

In this paper we use a panel of manufacturing firms in Spain to examine the extent to which they use internal and external sources of information (customers, suppliers, competitors, consultants and universities) to generate product and process innovation. Our results show that, although internal sources are influential, external sources of information are key to achieve innovation performance. These results are in line with the open innovation literature because they show that firms that are ...

Enhanced production of recombinant nattokinase in Bacillus subtilis by the elimination of limiting factors.

Science.gov (United States)

Chen, Po Ting; Chao, Yun-Peng

2006-10-01

By systematic investigation, glutamate and a mixture of metal ions were identified as factors limiting the production of nattokinase in Bacillus subtilis. Consequently, in medium supplemented with these materials, the recombinant strain secreted 4 times more nattokinase (260 mg l(-1)) than when grown in the unsupplemented medium.

Information in launch messages : stimulating the adoption of new high-tech consumer products

NARCIS (Netherlands)

Talke, K.S.S.; Snelders, Dirk

2013-01-01

This research investigates how the adoption of new high-tech consumer products can be stimulated by communicating product-related information in launch messages. In an initial pilot study, the authors find that for making an adoption decision, consumers require different types of product-related

Continuous aryl alcohol oxidase production under growth-limited conditions using a trickle bed reactor.

Science.gov (United States)

Pardo-Planas, Oscar; Atiyeh, Hasan K; Prade, Rolf A; Müller, Michael; Wilkins, Mark R

2018-05-01

An A. nidulans strain with a pyridoxine marker was used for continuous production of aryl alcohol oxidase (AAO) in a trickle bed reactor (TBR). Modified medium with reduced zinc, no copper, and 5 g/L ascorbic acid that reduced melanin production and increased AAO productivity under growth limited conditions was used. Two air flow rates, 0.11 L/min (0.1 vvm) and 1.1 L/min (1.0 vvm) were tested. More melanin formation and reduced protein productivity were observed with air flow rate of 1.1 L/min. Three random packings were used as support for the fungus inside the TBR column, two of which were hydrophobic and one which was hydrophilic, and three different dilution rates were tested. The use of GEA BCN 030 hydrophobic packing resulted in greater AAO yield and productivity than the other packings. Increasing dilution rates favored melanin formation and citric, lactic and succinic acid accumulation, which decreased AAO yield and productivity. Copyright © 2018 Elsevier Ltd. All rights reserved.

Product Bundling and Shared Information Goods: A Pricing Exercise

Science.gov (United States)

Morrison, William G.

2016-01-01

In this article, the author describes an exercise in which two pricing problems (product bundling and the sharing of digital information goods) can be understood using the same analytical approach. The exercise allows students to calculate the correct numerical answers with relative ease, while the teaching plan demonstrates the importance of the…

Quantifying the Limitation to World Cereal Production Due To Soil Phosphorus Status

Science.gov (United States)

Kvakić, Marko; Pellerin, Sylvain; Ciais, Philippe; Achat, David L.; Augusto, Laurent; Denoroy, Pascal; Gerber, James S.; Goll, Daniel; Mollier, Alain; Mueller, Nathaniel D.; Wang, Xuhui; Ringeval, Bruno

2018-01-01

Phosphorus (P) is an essential element for plant growth. Low P availability in soils is likely to limit crop yields in many parts of the world, but this effect has never been quantified at the global scale by process-based models. Here we attempt to estimate P limitation in three major cereals worldwide for the year 2000 by combining information on soil P distribution in croplands and a generic crop model, while accounting for the nature of soil-plant P transport. As a global average, the diffusion-limited soil P supply meets the crop's P demand corresponding to the climatic yield potential, due to the legacy soil P in highly fertilized areas. However, when focusing on the spatial distribution of P supply versus demand, we found strong limitation in regions like North and South America, Africa, and Eastern Europe. Averaged over grid cells where P supply is lower than demand, the global yield gap due to soil P is estimated at 22, 55, and 26% in winter wheat, maize, and rice. Assuming that a fraction (20%) of the annual P applied in fertilizers is directly available to the plant, the global P yield gap lowers by only 5-10%, underlying the importance of the existing soil P supply in sustaining crop yields. The study offers a base for exploring P limitation in crops worldwide but with certain limitations remaining. These could be better accounted for by describing the agricultural P cycle with a fully coupled and mechanistic soil-crop model.

An Information Model for Product Development : A Case Study at PHILIPS Shavers

NARCIS (Netherlands)

Jauregui Becker, Juan Manuel; Wits, Wessel Willems

2013-01-01

This paper presents an investigation into the development of an information model to support the Product Development Process (PDP) of shaving devices at PHILIPS. Firstly, challenges of the PDP were identified by carrying out interviews with several systems engineers and product architects. It was

Process redesign for effective use of product quality information in meat chains

NARCIS (Netherlands)

Rijpkema, W.A.; Rossi, R.; Vorst, van der J.G.A.J.

2012-01-01

To fulfil segmented consumer demand and add value, meat processors seek to exploit quality differences in meat products. Availability of product quality information is of key importance for this. We present a case study where an innovative sensor technology that provides estimates of an important

Plot showing ATLAS limits on Standard Model Higgs production in the mass range 100-600 GeV

CERN Multimedia

ATLAS Collaboration

2011-01-01

The combined upper limit on the Standard Model Higgs boson production cross section divided by the Standard Model expectation as a function of mH is indicated by the solid line. This is a 95% CL limit using the CLs method in the entire mass range. The dotted line shows the median expected limit in the absence of a signal and the green and yellow bands reflect the corresponding 68% and 95% expected

Plot showing ATLAS limits on Standard Model Higgs production in the mass range 110-150 GeV

CERN Multimedia

ATLAS Collaboration

2011-01-01

The combined upper limit on the Standard Model Higgs boson production cross section divided by the Standard Model expectation as a function of mH is indicated by the solid line. This is a 95% CL limit using the CLs method in in the low mass range. The dotted line shows the median expected limit in the absence of a signal and the green and yellow bands reflect the corresponding 68% and 95% expected

Bioenergy production and sustainable development: science base for policymaking remains limited.

Science.gov (United States)

Robledo-Abad, Carmenza; Althaus, Hans-Jörg; Berndes, Göran; Bolwig, Simon; Corbera, Esteve; Creutzig, Felix; Garcia-Ulloa, John; Geddes, Anna; Gregg, Jay S; Haberl, Helmut; Hanger, Susanne; Harper, Richard J; Hunsberger, Carol; Larsen, Rasmus K; Lauk, Christian; Leitner, Stefan; Lilliestam, Johan; Lotze-Campen, Hermann; Muys, Bart; Nordborg, Maria; Ölund, Maria; Orlowsky, Boris; Popp, Alexander; Portugal-Pereira, Joana; Reinhard, Jürgen; Scheiffle, Lena; Smith, Pete

2017-03-01

The possibility of using bioenergy as a climate change mitigation measure has sparked a discussion of whether and how bioenergy production contributes to sustainable development. We undertook a systematic review of the scientific literature to illuminate this relationship and found a limited scientific basis for policymaking. Our results indicate that knowledge on the sustainable development impacts of bioenergy production is concentrated in a few well-studied countries, focuses on environmental and economic impacts, and mostly relates to dedicated agricultural biomass plantations. The scope and methodological approaches in studies differ widely and only a small share of the studies sufficiently reports on context and/or baseline conditions, which makes it difficult to get a general understanding of the attribution of impacts. Nevertheless, we identified regional patterns of positive or negative impacts for all categories - environmental, economic, institutional, social and technological. In general, economic and technological impacts were more frequently reported as positive, while social and environmental impacts were more frequently reported as negative (with the exception of impacts on direct substitution of GHG emission from fossil fuel). More focused and transparent research is needed to validate these patterns and develop a strong science underpinning for establishing policies and governance agreements that prevent/mitigate negative and promote positive impacts from bioenergy production.

Work limitations among working persons with rheumatoid arthritis: results, reliability, and validity of the work limitations questionnaire in 836 patients.

Science.gov (United States)

Walker, Nancy; Michaud, Kaleb; Wolfe, Frederick

2005-06-01

To describe workplace limitations and the validity and reliability of the Work Limitations Questionnaire (WLQ) in persons with rheumatoid arthritis (RA). A total of 836 employed persons with RA reported clinical and work related measures and completed the WLQ, a 25 item questionnaire that assesses the impact of chronic health conditions on job performance and productivity. Limitations are categorized into 4 domains: physical demands (PDS), mental demands (MDS), time management demands (TMS), and output demands (ODS), which are then used to calculate the WLQ index. Of the 836 completed WLQ, about 10% (85) could not be scored, as more than half the items in each domain were not applicable to the patient's job. Demographic and clinical variables were associated with missing WLQ scores including older age (OR 1.7, 95% CI 1.3-2.1), male sex (OR 1.9, 95% CI 1.2-3.0), and Health Assessment Questionnaire (HAQ) scores (OR 1.4, 95% CI 1.0-2.0). Work limitations were present in all work domains: PDS (27.5%), MDS (15.7%), ODS (19.4%), and TMS (28.6%), resulting in a mean WLQ index of 5.9 (SD 5.6), which corresponds to a 4.9% decrease in productivity and a 5.1% increase in work hours to compensate for productivity loss. The WLQ index was inversely associated with Medical Outcomes Study Short Form 36 (SF-36) Mental Component Score (MCS; r = -0.60) and Physical Component Score (PCS; r = -0.49). Fatigue (0.5), pain (0.46), and HAQ (0.56) were also significantly associated with the WLQ index. Weaker associations were seen with days unable to perform (0.29), days activities cut down (0.38), and annual income (-0.10). The WLQ is a reliable tool for assessing work productivity. However, persons with RA tend to select jobs that they can do with their RA limitations, with the result that the WLQ does not detect functional limitations as well as the HAQ and SF-36. The WLQ provides special information that is not available using conventional measures of assessment, and can provide helpful

Information Driven Ecohydrologic Self-Organization

Directory of Open Access Journals (Sweden)

Benjamin L. Ruddell

2010-09-01

Full Text Available Variability plays an important role in the self-organized interaction between vegetation and its environment, yet the principles that characterize the role of the variability in these interactions remain elusive. To address this problem, we study the dependence between a number of variables measured at flux towers by quantifying the information flow between the different variables along with the associated time lag. By examining this network of feedback loops for seven ecosystems in different climate regions, we find that: (1 the feedback tends to maximize information production in the entire system, and the latter increases with increasing variability within the whole system; and (2 variables that participate in feedback exhibit moderated variability. Self-organization arises as a tradeoff where the ability of the total system to maximize information production through feedback is limited by moderate variability of the participating variables. This relationship between variability and information production leads to the emergence of ordered organization.

Informed Design to Robotic Production Systems; Developing Robotic 3D Printing System for Informed Material Deposition

NARCIS (Netherlands)

Mostafavi, S.; Bier, H.; Bodea, S.; Anton, A.M.

2015-01-01

This paper discusses the development of an informed Design-to-Robotic-Production (D2RP) system for additive manufacturing to achieve performative porosity in architecture at various scales. An extended series of experiments on materiality, fabrication and robotics were designed and carried out

Enterprise technology in support for accounting information systems. an innovation and productivity approach

Directory of Open Access Journals (Sweden)

Jose Melchor Medina-Quintero

2015-09-01

Full Text Available Technology and the accounting information systems are implemented in an organization with the aim of improving their efficiency. Companies spend large amounts of money on these tools every year in order to improve their organizational performance. The aim of this research is to determine the influence of SMEs’ technological alignment, information management and technological infrastructure on the performance of an institution (innovation and productivity in which accounting information systems are used. An empirical study is conducted in enterprises belonging to the service, commercial and industrial sectors in Ciudad Victoria, México, with the help of the SmartPLS statistical tool. The results mainly show that technology has helped raise productivity (improvement in administrative activities, in decision-making and in the use of generated information.

Special Analysis: Updated Analysis of the Effect of Wood Products on Trench Disposal Limits at the E-Area Low-Level Waste Facility

International Nuclear Information System (INIS)

Cook, J.R.

2001-01-01

This Special Analysis (SA) develops revised radionuclide inventory limits for trench disposal of low-level radioactive waste in the presence of wood products in the E-Area Low-Level Waste Facility. These limits should be used to modify the Waste Acceptance Criteria (WAC) for trench disposal. Because the work on which this SA is based employed data from tests using 100 percent wood products, the 40 percent limitation on wood products for trench (i.e., slit or engineered trench) disposal is not needed in the modified WAC

Is Nutrient Content and Other Label Information for Prescription Prenatal Supplements Different from Nonprescription Products?

Science.gov (United States)

Saldanha, Leila G; Dwyer, Johanna T; Andrews, Karen W; Brown, LaVerne L; Costello, Rebecca B; Ershow, Abby G; Gusev, Pavel A; Hardy, Constance J; Pehrsson, Pamela R

2017-09-01

Prenatal supplements are often recommended to pregnant women to help meet their nutrient needs. Many products are available, making it difficult to choose a suitable supplement because little is known about their labeling and contents to evaluate their appropriateness. To determine differences between prescription and nonprescription prenatal supplements available in the United States regarding declared nutrient and nonnutrient ingredients and the presence of dosing and safety-related information. Using two publicly available databases with information about prenatal supplement products, information from prescription and nonprescription product labels were extracted and evaluated. For the 82 prescription and 132 nonprescription products, declared label amounts of seven vitamins and minerals, docosahexaenoic acid (DHA), the presence of other nonnutrient components, and the presence of key safety and informational elements as identified in two Department of Health and Human Services Office of Inspector General (OIG)'s 2003 reports were compiled and compared. Compared with nonprescription products, prescription products contained significantly fewer vitamins (9±0.2 vs 11±0.3; P≤0.05) and minerals (4±0.1 vs 8±0.3; P≤0.05). Declared amounts of folic acid were higher in prescription products, whereas vitamin A, vitamin D, iodine, and calcium were higher in the nonprescription products. Amounts of iron, zinc, and DHA were similar. Virtually all products contained levels of one or more nutrients that exceeded the Recommended Dietary Allowances for pregnant and/or lactating women. Product type also influenced ingredients added. Fewer prescription products contained botanical ingredients (6% prescription vs 33% nonprescription) and probiotics (2% prescription vs 8% nonprescription). Only prescription products contained the stool softener docusate sodium. Our analysis of prenatal supplements indicates that prescription and nonprescription supplements differ in terms

40 CFR 63.6006 - How do I demonstrate continuous compliance with the emission limits for tire cord production...

Science.gov (United States)

2010-07-01

... compliance with the emission limits for tire cord production affected sources? 63.6006 Section 63.6006... Hazardous Air Pollutants: Rubber Tire Manufacturing Continuous Compliance Requirements for Tire Cord... tire cord production affected sources? (a) You must demonstrate continuous compliance with each...

The maximum entropy production and maximum Shannon information entropy in enzyme kinetics

Science.gov (United States)

Dobovišek, Andrej; Markovič, Rene; Brumen, Milan; Fajmut, Aleš

2018-04-01

We demonstrate that the maximum entropy production principle (MEPP) serves as a physical selection principle for the description of the most probable non-equilibrium steady states in simple enzymatic reactions. A theoretical approach is developed, which enables maximization of the density of entropy production with respect to the enzyme rate constants for the enzyme reaction in a steady state. Mass and Gibbs free energy conservations are considered as optimization constraints. In such a way computed optimal enzyme rate constants in a steady state yield also the most uniform probability distribution of the enzyme states. This accounts for the maximal Shannon information entropy. By means of the stability analysis it is also demonstrated that maximal density of entropy production in that enzyme reaction requires flexible enzyme structure, which enables rapid transitions between different enzyme states. These results are supported by an example, in which density of entropy production and Shannon information entropy are numerically maximized for the enzyme Glucose Isomerase.

The quantum limit for information transmission

International Nuclear Information System (INIS)

Schiffer, M.

1990-01-01

We give two independent and rigorous derivations for the quantum bound on the information transmission rate as proposed independently Bekenstein and Bremermann, preceded by a heuristic argument showing why such a sort of bound should hold. In both approaches, information carriers are quanta of some field. The first method resembles the microcanonical approach to Statistical Mechanics where the strategy of overestimating the real number of states by relaxing the indistinguishability of quanta was adopted. The second is entirely based upon max-entropy methods. Amazingly enough, the results obtained by these physically unrelated premises turn out to be identical, namely, that the single (noiseless) channel capacity is I sub(max) E/2πh bits s sup(-1). It is further shown that, in a finite time τ no information can ever be conveyed unless the energy threshold 2 πh/τ is reached. (author)

Development of Energy Models for Production Systems and Processes to Inform Environmentally Benign Decision-Making

Science.gov (United States)

Diaz-Elsayed, Nancy

machining parameters --- these decisions affect how much energy is utilized during production. Therefore, at the facility level a methodology is presented for implementing priority queuing while accounting for a high product mix in a discrete event simulation environment. A baseline case is presented and alternative factory designs are suggested, which lead to energy savings of approximately 9%. At the industry level, the majority of energy consumption for manufacturing facilities is utilized for machine drive, process heating, and HVAC. Numerous studies have characterized the energy of manufacturing processes and HVAC equipment, but energy data is often limited for a facility in its entirety since manufacturing companies often lack the appropriate sensors to track it and are hesitant to release this information for confidentiality purposes. Without detailed information about the use of energy in manufacturing sites, the scope of factory studies cannot be adequately defined. Therefore, the breakdown of energy consumption of sectors with discrete production is presented, as well as a case study assessing the electrical energy consumption, greenhouse gas emissions, their associated costs, and labor costs for selected sites in the United States, Japan, Germany, China, and India. By presenting energy models and assessments of production equipment, factory operations, and industry, this dissertation provides a comprehensive assessment of energy trends in manufacturing and recommends methods that can be used beyond these case studies and industries to reduce consumption and contribute to an energy-efficient future.

New information on world uranium resource, production, supply and demand

International Nuclear Information System (INIS)

Zhang Jianguo; Meng Jin

2006-01-01

New information on world uranium resource, production, supply and demand is introduced. Up to now, explored uranium resources at production cost < USD 40/kg U has 2523257 t uranium; production cost < USD 80/kg U has 5911514 t uranium; production cost < USD130/kg U has 11280488 t uranium; and cost range unassigned has 3102000 t uranium. At moment, the demand uranium of each year is about 67000 t U. After 2020, world uranium demand will rise well above 100000 t per annum with sharp revival of nuclear power plants. With three kinds of economic growth the cumulative requirement of the uranium in low demand case, middle demand case and high demand case from 2000 to 2050 is 3390000, 5394100 and 7577300 t respectively. In the world market uranium price rises from 20 years lowest 18.2 USD/kg U to 75.4 USD/kg U. In 2003, global uranium product is about 35385 t U, and 2004, global uranium product is about 40475 t U. In 2004's world uranium production underground mining, open pit, in situ, by product, and combination account for 39%, 27%, 19%, 11% and 4% respectively. (authors)

Information bias condemning radical food innovators? The case of insect-based products in the Netherlands

NARCIS (Netherlands)

Pascucci, S.; Magistris, de T.

2013-01-01

In this paper we analyze whether information bias is affecting consumers' WTP for radical food innovations. We collect data in the Netherlands on consumers' WTP for insect-based products. We used product attributes directly affected by information and EU legislation such as the visualization of

75 FR 77828 - Certain Hot-Rolled Flat-Rolled Carbon-Quality Steel Products From Brazil: Extension of Time Limit...

Science.gov (United States)

2010-12-14

...-Rolled Carbon-Quality Steel Products From Brazil: Extension of Time Limit for Final Results of...-Rolled Carbon Quality Steel Products From Brazil: Preliminary Results of Countervailing Duty... administrative review of the countervailing duty order on certain hot-rolled flat-rolled carbon- quality steel...

Construction of Network Management Information System of Agricultural Products Supply Chain Based on 3PLs

Institute of Scientific and Technical Information of China (English)

2010-01-01

The necessity to construct the network management information system of 3PLs agricultural supply chain is analyzed,showing that 3PLs can improve the overall competitive advantage of agricultural supply chain.3PLs changes the homogeneity management into specialized management of logistics service and achieves the alliance of the subjects at different nodes of agricultural products supply chain.Network management information system structure of agricultural products supply chain based on 3PLs is constructed,including the four layers (the network communication layer,the hardware and software environment layer,the database layer,and the application layer) and 7 function modules (centralized control,transportation process management,material and vehicle scheduling,customer relationship,storage management,customer inquiry,and financial management).Framework for the network management information system of agricultural products supply chain based on 3PLs is put forward.The management of 3PLs mainly includes purchasing management,supplier relationship management,planning management,customer relationship management,storage management and distribution management.Thus,a management system of internal and external integrated agricultural enterprises is obtained.The network management information system of agricultural products supply chain based on 3PLs has realized the effective sharing of enterprise information of agricultural products supply chain at different nodes,establishing a long-term partnership revolving around the 3PLs core enterprise,as well as a supply chain with stable relationship based on the supply chain network system,so as to improve the circulation efficiency of agricultural products,and to explore the sales market for agricultural products.

What limits production of unusual monoenoic fatty acids in transgenic plants?

Science.gov (United States)

Suh, Mi Chung; Schultz, David J; Ohlrogge, John B

2002-08-01

Unusual monounsaturated fatty acids are major constituents (greater than 80%) in seeds of Coriandrum sativum L. (coriander) and Thunbergia alata Bojer, as well as in glandular trichomes (greater than 80% derived products) of Pelargonium x hortorum (geranium). These diverged fatty acid structures are produced via distinct plastidial acyl-acyl carrier protein (ACP) desaturases. When expressed in Arabidopsis thaliana (L.) Heynh. under strong seed-specific promoters the unusual acyl-ACP desaturases resulted in accumulation of unusual monoene fatty acids at 1-15% of seed fatty acid mass. In this study, we have examined several factors that potentially limit higher production of unusual monoenes in transgenic oilseeds. (i) Immunoblots indicated that the introduced desaturases were expressed at levels equivalent to or higher than the endogenous delta9 18:0-ACP desaturase. However, the level of unusual fatty acid produced in transgenic plants was not correlated with the level of desaturase expression. (ii) The unusual desaturases were expressed in several backgrounds, including antisense 18:0-ACP desaturase plants, in fab1 mutants, and co-expressed with specialized ACP or ferredoxin isoforms. None of these experiments led to high production of expected products. (iii) No evidence was found for degradation of the unusual fatty acids during seed development. (iv) Petroselinic acid added to developing seeds was incorporated into triacylglycerol as readily as oleic acid, suggesting no major barriers to its metabolism by enzymes of glycerolipid assembly. (v) In vitro and in situ assay of acyl-ACP desaturases revealed a large discrepancy of activity when comparing unusual acyl-ACP desaturases with the endogenous delta9 18:0-ACP desaturase. The combined results, coupled with the sensitivity of acyl-ACP desaturase activity to centrifugation and low salt or detergent suggests low production of unusual monoenes in transgenic plants may be due to the lack of, or incorrect assemble of

The Impact of Micromessaging on Performance and Productivity in Information Technology Environments

Science.gov (United States)

Brown, Richard T., Jr.

2012-01-01

The problem examined in the study was how microinequities affect organizational productivity and performance as a result of employee exclusion, which may lead to morale issues and problems with retention. The purpose of the study was to investigate the potential effect of micromessaging on performance and productivity in information technology…

Functional and Behavioral Product Information Representation and Consistency Validation for Collaboration in Product Lifecycle Activities

Science.gov (United States)

Baysal, Mehmet Murat

2012-01-01

Information models that represent the function, assembly and behavior of artifacts are critical in the conceptual development of a product and its evaluation. Much research has been conducted in this area; however, existing models do not relate function, behavior and structure in a comprehensive and consistent way. In this work, NIST's Core…

7 CFR 1221.123 - Patents, copyrights, inventions, trademarks, information, publications, and product formulations.

Science.gov (United States)

2010-01-01

..., information, publications, and product formulations. 1221.123 Section 1221.123 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (MARKETING AGREEMENTS AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE SORGHUM PROMOTION, RESEARCH, AND INFORMATION ORDER Sorghum...

MIM Holdings Limited 1984 annual report

Energy Technology Data Exchange (ETDEWEB)

1984-01-01

M.I.M. Holdings Limited is a major mining and mineral processing company formed in 1970. The group traces its origins to 1924 following the discovery of silver lead zinc started in 1931 and parallel production of silver lead zinc ore at Mount Isa the previous year. Today the MIM group is a diversified mineral, coal and metal producing and marketing organisation. Details of the company's principal activities over the last year, and accounts and management information for the last year are presented.

The Internationalisation of Production

DEFF Research Database (Denmark)

Yang, Cheng; Madsen, Erik Skov

2013-01-01

practice is further analysed in terms of (1) general information of each case company; (2) motivation of production internationalisation of each case company; (3) limitations as SMEs to internationalise production; (4) operational activities during the internationalization; (5) benefits of joint effort......This paper mainly aims to explore how SMEs internationalise their production. Directed by this objective, a new practice adopted by five Danish SMEs to internationalise their production to China is identified, which to our knowledge has never been reported by any of the existing literature. The new...

Structural optimization for materially informed design to robotic production processes

NARCIS (Netherlands)

Bier, H.H.; Mostafavi, S.

2015-01-01

Hyperbody’s materially informed Design-to-Robotic-Production (D2RP) processes for additive and subtractive manufacturing aim to achieve performative porosity in architecture at various scales. An extended series of D2RP experiments aiming to produce prototypes at 1:1 scale wherein design materiality

Torsion limits from t t macr production at the LHC

Science.gov (United States)

de Almeida, F. M. L.; de Andrade, F. R.; do Vale, M. A. B.; Nepomuceno, A. A.

2018-04-01

Torsion models constitute a well-known class of extended quantum gravity models. In this work, one investigates the phenomenological consequences of a torsion field interacting with top quarks at the LHC. A torsion field could appear as a new heavy state characterized by its mass and couplings to fermions. This new state would form a resonance decaying into a top antitop pair. The latest ATLAS t t ¯ production results from LHC 13 TeV data are used to set limits on torsion parameters. The integrated luminosity needed to observe torsion resonance at the next LHC upgrades are also evaluated, considering different values for the torsion mass and its couplings to Standard Model fermions. Finally, prospects for torsion exclusion at the future LHC phases II and III are obtained using fast detector simulations.

Labeling the finished products as a part of information support of marketing activities at vegetable-food enterprises

Directory of Open Access Journals (Sweden)

Anna Petrenko

2016-03-01

Full Text Available The article describes the influence of labeling food-vegetable subcomplex, as part of marketing activities provide information on consumer behavior, the choice of consumers and an increase in sales of enterprises. This article's aims -are to estimate estimate consumer response to the information received from various kinds of labels and labeling products, and analysis of the impact of such information on the final consumer choices. The article analizyng the needness of the front and rear panels of information on labels of product, differentiation methods of marking. The importance of product information on the impact on the environment, and the associated benefits this consumer preference. Analyzed the importance of providing consumers information about the components and their usefulness for each product, and method of presentation data in full or abbreviated form. The conclusion of the obvious dependence providing consumer preferences on the type of labeling goods of food-vegitable subcomplex and according the final choice of the consumer, which in turn affects the increase in factory production and will allow the enterprises to consolidate their positions on international markets.

Product information affects perception of sensory, collative properties and elicited emotions of Indonesian tempe

DEFF Research Database (Denmark)

Fibri, Dwi Larasatie Nur; Frøst, Michael Bom

The effects of product information given to consumers were evaluated on sensory and collative properties of tempe, a traditional Indonesian food. A consumer test on 9 different types of tempe (5 traditionally tempe and 4 more modernized version of tempe) was carried out with 175 Indonesian...... methods, where the traditional was most different from partly modernized and fully modernized. However, interaction is not systematic whether on bean or production type. Information changed the perception on sensory and collative properties of the products. The results demonstrate the powerful effect...... of sensory properties, rating of collative properties and elicited emotions. The results show astonishingly large effects of the information (table 1 and 2). The 5 traditional tempes (produced from velvet bean, black soybean, mungbean, jackbean, and local yellow soybean, all inoculated with traditional usar...

Case study of information product for strategy research, planning research, and policy research

International Nuclear Information System (INIS)

Yuan Yujun; Zou Lin; Liu Qun; Wang Yongping

2010-01-01

Soft science research is significant and can directly support the decision-making and development. The strategy research, planning research, and policy research each play an important role in soft science research. As the National Strategy of Informatization being implemented and advanced, some progress are made and some special information tools are produced in the process of strengthening the development research with information technologies. At first, the article introduced some cases of information products application, such as the domestic and overseas information products for energy strategy research and planning research and policy research, the governmental management information system for planning and investment, examination and approval and permission system for the planning of the land for construction, China agriculture decision support system and so on, and also gave a brief analysis on the theories and methods, main functions and application status. And then, with a analysis on the features of the works of development planning of China National Nuclear Corporation (CNNC) development, this article gave some suggestions on how to strengthen the development of information system for the development planning of the CNNC. (authors)

Use of limited information in a license application to construct a repository

International Nuclear Information System (INIS)

McGarry, J.M. III; Echols, F.S.

1996-01-01

The purpose of this paper is to provide a rationale for the proposition that the Department of Energy's (DOE's) submittal of a license application (LA) for the construction of a geologic repository to the Nuclear Regulatory Commission (NRC) may be, and arguably must be, based on statutorily-limited site characterization data and design information. The Nuclear Waste Policy Act of 1982 (NWPA), as amended, is the controlling statute for the disposal of spent nuclear fuel in a licensed geologic repository. Applicable NRC regulations for the licensing of such a repository are found for the most part in 10 C.F.R. Part 60

Unmet information needs and limited health literacy in newly diagnosed breast cancer patients over the course of cancer treatment.

Science.gov (United States)

Halbach, Sarah Maria; Ernstmann, Nicole; Kowalski, Christoph; Pfaff, Holger; Pförtner, Timo-Kolja; Wesselmann, Simone; Enders, Anna

2016-09-01

To investigate unmet information needs in newly diagnosed breast cancer patients over the course of cancer treatment and its association with health literacy. We present results from a prospective, multicenter cohort study (PIAT). Newly diagnosed breast cancer patients (N=1060) were surveyed directly after breast cancer surgery, 10 and 40 weeks later. Pooled linear regression modeling was employed analyzing changes in unmet information needs over time and its association with health literacy. Unmet information needs on side effects and medication and medical examination results and treatment options were high and increased during the first 10 weeks after breast cancer surgery. Considering health promotion and social issues, unmet information needs started high and decreased during post-treatment. Patients with limited health literacy had higher unmet information needs. Our results indicate a mismatch in information provision and breast cancer patients' information needs. Patients with limited health literacy may be at a distinct disadvantage in having their information needs met over the course of breast cancer treatment. Strategies are needed to reduce unmet information needs in breast cancer patients considering treatment-phase and health literacy and thereby enable them to better cope with their diseases. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Water and nitrogen use efficiency under limited water supply for maize to increase land productivity

International Nuclear Information System (INIS)

Craciun, I.; Craciun, M.

1995-01-01

As drought is the main environmental factor limiting productivity, the study of plant response to water deficit has been one of the major research topics. The increasing of maize evapotranspiration ET does not always mean the increase of efficiency because, the brightest ET value does not always mean the highest grain yield value, AS the result of the mechanisms relating to the grain yield and ET which are far from simple. The rain amount and distribution during the reproductive stage is the main meteorological factor in flouncing yield. In our study 1991, the high soil moisture content determines a reduction of maize grain yield, in the wet years due to excess of water under irrigation conditions which normally limits root development as a result of insufficient oxygen for transpiration and lac ha of nitrate formation, the yield response to water deficit of different hybrids is of major importance in production planing. The available water supply would be directed towards fully meeting requirements of the hybrids with the higher K sub y over the restricted area and for the hybrids with a lower K sub y, the overall production will increase by extending the area under irrigation, without fully meeting water requirement provided water deficit do not exceed critical values.1 tab; 9 figs (Author)

The Pharmacokinetics of Second-Generation Long-Acting Injectable Antipsychotics: Limitations of Monograph Values.

Science.gov (United States)

Lee, Lik Hang N; Choi, Charles; Collier, Abby C; Barr, Alasdair M; Honer, William G; Procyshyn, Ric M

2015-12-01

Product monographs (also known by terms such as Summary of Product Characteristics and Highlights of Prescribing Information, depending on the jurisdiction) provide essential information to ensure the safe and effective use of a drug. Medical practitioners often rely on these monographs for guidance on matters related to pharmacokinetics as well as indications, contraindications, clinical pharmacology, and adverse reactions. The clinical and scientific information found within these documents, forming the basis for decision making, are presumed to be derived from well-designed studies. The objective of this review is to examine the source and validity of the pharmacokinetic data used in establishing the half-lives and times to steady-state reported in the product monographs of second-generation long-acting injectable antipsychotics. Thus, we have critically evaluated the clinical trials from which the pharmacokinetic parameters listed in the product monographs were determined. In many cases, the pharmacokinetic information presented in product monographs is of limited use to clinicians wishing to optimize the effectiveness and tolerability of second-generation long-acting injectable antipsychotics. Under such circumstances, off-label prescribing practices may actually produce better clinical outcomes than if decisions were made based on the product monographs alone.

Principles for an interactive multi-scale assessment of sustainable production limits - lessons from the Limpopo river basin case, South Africa

Science.gov (United States)

Froebrich, Jochen; de Cleccq, Willem; Veraart, Jeroen; Vullings, Wies

2015-04-01

About 7.2 billion people currently live on the Earth and the population is projected to reach 9.6 billion by 2050, that growth will be mainly in developing countries, with more than half in Africa (United Nations 2013). Any local extension of irrigated agriculture in a region of scarce natural resources may potentially restrict the possibility to extend land and water use at another location of the same river basin. In order to support, develop and to assess such future interventions, it is important to define limits until which a sustainable production can take place at a given location, taking into account competing claims on natural resources, human welfare and impacts on environmental quality. We define Sustainable production limits as limits for the possible resource use, within which a production can be extended without restricting the growth opportunities at a neighboured location. The more threatened the natural resources become, the more important it is to consider the effect of other upcoming interventions within the same region. As a consequence, interventions for future resource use have to be assessed against the future available natural resources. This is of particular relevance for evaluating possible extensions of irrigation areas within a river basin. Investigating possible limits for extending irrigated agriculture at local scale requires an understanding of the complexity, including boundaries, activities, stakeholders, and opportunities at river basin scale, and more. Switching between the scales in this information, in a participatory process, appears to be a challenge in its own. Within the Limpopo River basin (South Africa), we analysed (i) possible interventions at local scale (transdisciplinary innovation of irrigation by smallholders, launching of PPPs), (ii) restrictions for developing irrigation at the Letaba sub basin scale, and (iii) water balance at the scale of the Limpopo basin. Experiences from the Limpopo case revealed, that

MFGE8 inhibits inflammasome-induced IL-1β production and limits postischemic cerebral injury.

Science.gov (United States)

Deroide, Nicolas; Li, Xuan; Lerouet, Dominique; Van Vré, Emily; Baker, Lauren; Harrison, James; Poittevin, Marine; Masters, Leanne; Nih, Lina; Margaill, Isabelle; Iwakura, Yoichiro; Ryffel, Bernhard; Pocard, Marc; Tedgui, Alain; Kubis, Nathalie; Mallat, Ziad

2013-03-01

Milk fat globule-EGF 8 (MFGE8) plays important, nonredundant roles in several biological processes, including apoptotic cell clearance, angiogenesis, and adaptive immunity. Several recent studies have reported a potential role for MFGE8 in regulation of the innate immune response; however, the precise mechanisms underlying this role are poorly understood. Here, we show that MFGE8 is an endogenous inhibitor of inflammasome-induced IL-1β production. MFGE8 inhibited necrotic cell-induced and ATP-dependent IL-1β production by macrophages through mediation of integrin β(3) and P2X7 receptor interactions in primed cells. Itgb3 deficiency in macrophages abrogated the inhibitory effect of MFGE8 on ATP-induced IL-1β production. In a setting of postischemic cerebral injury in mice, MFGE8 deficiency was associated with enhanced IL-1β production and larger infarct size; the latter was abolished after treatment with IL-1 receptor antagonist. MFGE8 supplementation significantly dampened caspase-1 activation and IL-1β production and reduced infarct size in wild-type mice, but did not limit cerebral necrosis in Il1b-, Itgb3-, or P2rx7-deficient animals. In conclusion, we demonstrated that MFGE8 regulates innate immunity through inhibition of inflammasome-induced IL-1β production.

Reduced production of creatinine limits its use as marker of kidney injury in sepsis.

Science.gov (United States)

Doi, Kent; Yuen, Peter S T; Eisner, Christoph; Hu, Xuzhen; Leelahavanichkul, Asada; Schnermann, Jürgen; Star, Robert A

2009-06-01

Although diagnosis and staging of acute kidney injury uses serum creatinine, acute changes in creatinine lag behind both renal injury and recovery. The risk for mortality increases when acute kidney injury accompanies sepsis; therefore, we sought to explore the limitations of serum creatinine in this setting. In mice, induction of sepsis by cecal ligation and puncture in bilaterally nephrectomized mice increased markers of nonrenal organ injury and serum TNF-alpha. Serum creatinine, however, was significantly lower in septic animals than in animals subjected to bilateral nephrectomy and sham cecal ligation and puncture. Under these conditions treatment with chloroquine decreased nonrenal organ injury markers but paradoxically increased serum creatinine. Sepsis dramatically decreased production of creatinine in nephrectomized mice, without changes in body weight, hematocrit, or extracellular fluid volume. In conclusion, sepsis reduces production of creatinine, which blunts the increase in serum creatinine after sepsis, potentially limiting the early detection of acute kidney injury. This may partially explain why small absolute increases in serum creatinine levels are associated with poor clinical outcomes. These data support the need for new biomarkers that provide better measures of renal injury, especially in patients with sepsis.

Misplaced Trust: Racial Differences in Use of Tobacco Products and Trust in Sources of Tobacco Health Information.

Science.gov (United States)

Alcalá, Héctor E; Sharif, Mienah Z; Morey, Brittany N

2017-10-01

Recently, the rates of utilization of alternative tobacco products have increased. Providing health information about tobacco products from trustworthy sources may help decrease the popularity of these products. Using a nationally representative study of adults, we fill the current gap in research on racial and ethnic disparities in utilization of alternative tobacco products as well as in trust of sources of health information about tobacco products. Data came from the Health Information National Trends Survey (N = 3738), which was collected in 2015. Logistic regression models were used to calculate odds of use of seven different tobacco product (eg, hookah, e-cigarettes, etc.), trust in seven different sources of e-cigarette health information (eg, family or friends, health care providers, etc.), and trust in six different sources of tobacco health information, adjusting for control variables. There were disparities in utilization of alternative tobacco products and in trust, in tobacco companies across racial and ethnic groups. Blacks and Asians were far more likely than whites to trust tobacco (adjusted odds ratios = 8.67 and 4.34) and e-cigarette companies (adjusted odds ratios = 6.97 and 3.13) with information about the health effects of e-cigarettes than whites. The popularity of alternative tobacco products appears to be high and may offset recent observed decreases in cigarette use. Blacks and Asians appear to trust tobacco companies as sources of information when compared to whites. Higher levels of trust in tobacco companies among Asians and blacks may translate to greater susceptibility to utilize tobacco products among these groups, thereby increasing disparities. There is a need for social marketing and education efforts focused on increasing awareness of adverse health effects of using alternative tobacco products as well as on the untrustworthiness of tobacco and e-cigarette companies, especially among racial and ethnic minorities. © The Author

An upper limit on hypertriton production in collisions of Ar(1.76 A GeV) + KCl

International Nuclear Information System (INIS)

Agakishiev, G.; Chernenko, S.; Fateev, O.; Zanevsky, Y.; Belver, D.; Cabanelas, P.; Castro, E.; Garzon, J.A.; Blanco, A.; Fonte, P.; Lopes, L.; Mangiarotti, A.; Boehmer, M.; Friese, J.; Gernhaeuser, R.; Jurkovic, M.; Kruecken, R.; Maier, L.; Weber, M.; Boyard, J.L.; Hennino, T.; Liu, T.; Moriniere, E.; Ramstein, B.; Destefanis, M.; Gilardi, C.; Kuehn, W.; Lange, J.S.; Metag, V.; Spruck, B.; Dohrmann, F.; Kaempfer, B.; Kotte, R.; Naumann, L.; Wendisch, C.; Wuestenfeld, J.; Dybczak, A.; Michalska, B.; Palka, M.; Przygoda, W.; Salabura, P.; Trebacz, R.; Wisniowski, M.; Epple, E.; Fabbietti, L.; Lapidus, K.; Siebenson, J.; Finocchiaro, P.; Schmah, A.; Spataro, S.; Froehlich, I.; Lorenz, M.; Markert, J.; Michel, J.; Muentz, C.; Pachmayer, Y.C.; Pechenova, O.; Rehnisch, L.; Rustamov, A.; Scheib, T.; Schuldes, H.; Stroebele, H.; Tarantola, A.; Teilab, K.; Galatyuk, T.; Gonzalez-Diaz, D.; Golubeva, M.; Guber, F.; Ivashkin, A.; Karavicheva, T.; Kurepin, A.; Reshetin, A.; Sadovsky, A.; Gumberidze, M.; Heinz, T.; Holzmann, R.; Koenig, I.; Koenig, W.; Kolb, B.W.; Lang, S.; Pechenov, V.; Pietraszko, J.; Schwab, E.; Sturm, C.; Traxler, M.; Yurevich, S.; Iori, I.; Krasa, A.; Krizek, F.; Kugler, A.; Sobolev, Yu.G.; Tlusty, P.; Wagner, V.; Kuc, H.; Mousa, J.; Tsertos, H.; Stroth, J.

2013-01-01

A high-statistic data sample of Ar(1.76 AGeV)+KCl events recorded with HADES is used to search for a hypertriton signal. An upper production limit per centrality-triggered event of 1.04 x 10 -3 on the 3 σ level is derived. Comparing this value with the number of successfully reconstructed Λ hyperons allows to determine an upper limit on the ratio N 3 Λ H /N Λ , which is confronted with statistical and coalescence-type model calculations. (orig.)

Internet application: production-technical information system MoNET

International Nuclear Information System (INIS)

Tomiga, J.

2004-01-01

MoNET is the production-technical information system supporting engineering, operational and maintenance processes of distribution network administrator. It utilizes the model of distribution network that is situated in the geo-space relational database. The geo-space database represents an information base of operational-technical processes. It contains elements and equipment s of the distribution network, failures, operational events, maintenance records, but also, parcels, reference planimetry, e.g. and other subjects for which is relevant the positional datum - geo-space information. MoNET is typically exploited in the fields: - evidence of the subjects and equipment of network, technical documentation; - property administration; - planning of network development, support of designing and construction; - technical calculation; - breakdown controller centre; - maintenance management. MoNET can be implemented as the desktop application, however its first benefit is derived from its usage as the intranet application MoNET WEB for the whole enterprise or organisation. This version enables an unrestricted number of end-users to enter this system. The end-users don't need any special software to enter the data of MoNet WEB application, the pre-installed Internet Explorer will do. (author)

Increasing productivity by matching farming system management and genotype in water-limited environments.

Science.gov (United States)

Kirkegaard, J A; Hunt, J R

2010-10-01

Improvements in water productivity and yield arise from interactions between varieties (G) and their management (M). Most G×M interactions considered by breeders and physiologists focus on in-crop management (e.g. sowing time, plant density, N management). However, opportunities exist to capture more water and use it more effectively that involve judicious management of prior crops and fallows (e.g. crop sequence, weed control, residue management). The dry-land wheat production system of southern Australia, augmented by simulation studies, is used to demonstrate the relative impacts and interactions of a range of pre-crop and in-crop management decisions on water productivity. A specific case study reveals how a novel genetic trait, long coleoptiles that enable deeper sowing, can interact with different management options to increase the water-limited yield of wheat from 1.6 t ha(-1) to 4.5 t ha(-1), reflecting the experience of leading growers. Understanding such interactions will be necessary to capture benefits from new varieties within the farming systems of the future.

Optimizing Regional Food and Energy Production under Limited Water Availability through Integrated Modeling

Directory of Open Access Journals (Sweden)

Junlian Gao

2018-05-01

Full Text Available Across the world, human activity is approaching planetary boundaries. In northwest China, in particular, the coal industry and agriculture are competing for key limited inputs of land and water. In this situation, the traditional approach to planning the development of each sector independently fails to deliver sustainable solutions, as solutions made in sectorial ‘silos’ are often suboptimal for the entire economy. We propose a spatially detailed cost-minimizing model for coal and agricultural production in a region under constraints on land and water availability. We apply the model to the case study of Shanxi province, China. We show how such an integrated optimization, which takes maximum advantage of the spatial heterogeneity in resource abundance, could help resolve the conflicts around the water–food–energy (WFE nexus and assist in its management. We quantify the production-possibility frontiers under different water-availability scenarios and demonstrate that in water-scarce regions, like Shanxi, the production capacity and corresponding production solutions are highly sensitive to water constraints. The shadow prices estimated in the model could be the basis for intelligent differentiated water pricing, not only to enable the water-resource transfer between agriculture and the coal industry, and across regions, but also to achieve cost-effective WFE management.

The Kinetics of Fission Products Release from Microfuel Taking into Account the Trapped Fraction and Limited Solubility Effects

International Nuclear Information System (INIS)

Ivanov, A.S.; Rusinkevich, A.A.

2014-01-01

In this paper the effect of the oxygen getter on fission products release from the coated particle was studied by the “FP Kinetics” code. Trapped fraction and limited solubility effects taken into consideration. It was shown that these effects have a significant impact on the concentration profile and integral release of fission products. (author)

Robust test limits

NARCIS (Netherlands)

Albers, Willem/Wim; Kallenberg, W.C.M.; Otten, G.D.

1997-01-01

Because of inaccuracies of the measurement process inspection of manufactured parts requires test limits which are more strict than the given specification limits. Test limits derived under the assumption of normality for product characteristics turn out to violate the prescribed bound on the

Providing Technology Information, Products, and Services (TIPS) Through the World Wide Web

National Research Council Canada - National Science Library

East, E

1999-01-01

.... In TIPS these assets include people, capabilities, products, and publications. Relevant information is captured as part of the daily business practices of ERDC researchers, supervisors, managers, and staff...

Special forest products: species information guide for the Pacific Northwest.

Science.gov (United States)

Nan C. Vance; Melissa Borsting; David Pilz; Jim. Freed

2001-01-01

This guide is a collection of information about economically important vascular and nonvascular plants and fungi found in the Pacific Northwest that furnish special forest products. Many of these plants and fungi are also found in Alaska, northern Idaho, and western Montana. They contribute to many botanical, floral, woodcraft, and decorative industries and to the...

An upper limit on hypertriton production in collisions of Ar(1.76 A GeV) + KCl

Energy Technology Data Exchange (ETDEWEB)

Agakishiev, G.; Chernenko, S.; Fateev, O.; Zanevsky, Y. [Joint Institute of Nuclear Research, Dubna (Russian Federation); Belver, D.; Cabanelas, P.; Castro, E.; Garzon, J.A. [Univ. de Santiago de Compostela, LabCAF. F. Fisica, Santiago de Compostela (Spain); Blanco, A.; Fonte, P.; Lopes, L.; Mangiarotti, A. [LIP-Laboratorio de Instrumentacao e Fisica Experimental de Particulas, Coimbra (Portugal); Boehmer, M.; Friese, J.; Gernhaeuser, R.; Jurkovic, M.; Kruecken, R.; Maier, L.; Weber, M. [Technische Universitaet Muenchen, Physik Department E12, Garching (Germany); Boyard, J.L.; Hennino, T.; Liu, T.; Moriniere, E.; Ramstein, B. [Universite Paris Sud, Institut de Physique Nucleaire (UMR 8608), CNRS/IN2P3, Orsay Cedex (France); Destefanis, M.; Gilardi, C.; Kuehn, W.; Lange, J.S.; Metag, V.; Spruck, B. [Justus Liebig Universitaet Giessen, II. Physikalisches Institut, Giessen (Germany); Dohrmann, F.; Kaempfer, B.; Kotte, R.; Naumann, L.; Wendisch, C.; Wuestenfeld, J. [Helmholtz-Zentrum Dresden-Rossendorf, Institut fuer Strahlenphysik, Dresden (Germany); Dybczak, A.; Michalska, B.; Palka, M.; Przygoda, W.; Salabura, P.; Trebacz, R.; Wisniowski, M. [Jagiellonian University of Cracow, Smoluchowski Institute of Physics, Krakow (Poland); Epple, E.; Fabbietti, L.; Lapidus, K.; Siebenson, J. [Excellence Cluster ' ' Origin and Structure of the Universe' ' , Garching (Germany); Finocchiaro, P.; Schmah, A.; Spataro, S. [Laboratori Nazionali del Sud, Istituto Nazionale di Fisica Nucleare, Catania (Italy); Froehlich, I.; Lorenz, M.; Markert, J.; Michel, J.; Muentz, C.; Pachmayer, Y.C.; Pechenova, O.; Rehnisch, L.; Rustamov, A.; Scheib, T.; Schuldes, H.; Stroebele, H.; Tarantola, A.; Teilab, K. [Goethe-Universitaet, Institut fuer Kernphysik, Frankfurt (Germany); Galatyuk, T.; Gonzalez-Diaz, D. [Technische Universitaet Darmstadt, Darmstadt (Germany); Golubeva, M.; Guber, F.; Ivashkin, A.; Karavicheva, T.; Kurepin, A.; Reshetin, A.; Sadovsky, A. [Russian Academy of Science, Institute for Nuclear Research, Moscow (Russian Federation); Gumberidze, M. [Technische Universitaet Darmstadt, Darmstadt (Germany); Universite Paris Sud, Institut de Physique Nucleaire (UMR 8608), CNRS/IN2P3, Orsay Cedex (France); Heinz, T.; Holzmann, R.; Koenig, I.; Koenig, W.; Kolb, B.W.; Lang, S.; Pechenov, V.; Pietraszko, J.; Schwab, E.; Sturm, C.; Traxler, M.; Yurevich, S. [GSI Helmholtzzentrum fuer Schwerionenforschung GmbH, Darmstadt (Germany); Iori, I. [Istituto Nazionale di Fisica Nucleare, Sezione di Milano, Milano (Italy); Krasa, A.; Krizek, F.; Kugler, A.; Sobolev, Yu.G.; Tlusty, P.; Wagner, V. [Academy of Sciences of Czech Republic, Nuclear Physics Institute, Rez (Czech Republic); Kuc, H. [Jagiellonian University of Cracow, Smoluchowski Institute of Physics, Krakow (Poland); Universite Paris Sud, Institut de Physique Nucleaire (UMR 8608), CNRS/IN2P3, Orsay Cedex (France); Mousa, J.; Tsertos, H. [University of Cyprus, Department of Physics, Nicosia (Cyprus); Stroth, J. [GSI Helmholtzzentrum fuer Schwerionenforschung GmbH, Darmstadt (Germany); Goethe-Universitaet, Institut fuer Kernphysik, Frankfurt (Germany); Collaboration: HADES Collaboration

2013-11-15

A high-statistic data sample of Ar(1.76 AGeV)+KCl events recorded with HADES is used to search for a hypertriton signal. An upper production limit per centrality-triggered event of 1.04 x 10{sup -3} on the 3 {sigma} level is derived. Comparing this value with the number of successfully reconstructed {Lambda} hyperons allows to determine an upper limit on the ratio N{sub 3{sub {Lambda}H}}/N{sub {Lambda}}, which is confronted with statistical and coalescence-type model calculations. (orig.)

Production and transfer of energy and information in Hamiltonian systems.

Directory of Open Access Journals (Sweden)

Chris G Antonopoulos

Full Text Available We present novel results that relate energy and information transfer with sensitivity to initial conditions in chaotic multi-dimensional Hamiltonian systems. We show the relation among Kolmogorov-Sinai entropy, Lyapunov exponents, and upper bounds for the Mutual Information Rate calculated in the Hamiltonian phase space and on bi-dimensional subspaces. Our main result is that the net amount of transfer from kinetic to potential energy per unit of time is a power-law of the upper bound for the Mutual Information Rate between kinetic and potential energies, and also a power-law of the Kolmogorov-Sinai entropy. Therefore, transfer of energy is related with both transfer and production of information. However, the power-law nature of this relation means that a small increment of energy transferred leads to a relatively much larger increase of the information exchanged. Then, we propose an "experimental" implementation of a 1-dimensional communication channel based on a Hamiltonian system, and calculate the actual rate with which information is exchanged between the first and last particle of the channel. Finally, a relation between our results and important quantities of thermodynamics is presented.

Production Cells in Construction: Considering Time, Space and Information Linkages to Seek Broader Implementations

Directory of Open Access Journals (Sweden)

Renato Nunes Mariz

2013-01-01

Full Text Available The use of production cells in manufacturing has achieved many benefits, motivating researchers to apply them in the construction environment. The aim of this research is to identify time, space, and information linkages in construction’s production cells applications, seeking opportunities for broader implementations. We adopted a literature review approach focusing on cases in the Brazilian construction sector that addressed cell applications. Subsequently, comparative tables of these publications were prepared, analyzing the consideration of time, space, and information linkages, as well as identified results. The article pointed out that there is a gap in publications that address the application of a production cell in almost all construction flows, except the job site flow, reflecting the tendency of most companies of applying lean concepts firstly in physical flows. By analyzing these aspects (group of features that enhance the use of the cell, it was found that “material flow and pull systems” and “operators interaction” were the aspects most often considered, but mostly partially. Few cases reported the use of “flexibility” and “equipment maintenance”. No case reported comprehensive considerations of the three important linkages of time, space, and information. Space was the linkage better considered compared to time and information linkages. Lead time reduction, cost savings and increased productivity were among the greatest benefits reported from the applications of production cells. There is also a positive correlation between the linkages coverage and the number of benefits obtained. Further research is suggested in order to investigate the results of a more comprehensive application considering all linkages.

Declaration of nutrition information on and nutritional quality of Thai ready-to-eat packaged food products.

Science.gov (United States)

Pongutta, Suladda; Chongwatpol, Pitipa; Tantayapirak, Parwin; Vandevijvere, Stefanie

2018-06-01

The present study assessed the nutrition information displayed on ready-to-eat packaged foods and the nutritional quality of those food products in Thailand. In March 2015, the nutrition information panels and nutrition and health claims on ready-to-eat packaged foods were collected from the biggest store of each of the twelve major retailers, using protocols developed by the International Network for Food and Obesity/Non-communicable Diseases Research, Monitoring and Action Support (INFORMAS). The Thai Nutrient Profile Model was used to classify food products according to their nutritional quality as 'healthier' or 'less healthy'. In total, information from 7205 food products was collected across five broad food categories. Out of those products, 5707 (79·2 %), 2536 (35·2 %) and 1487 (20·6 %) carried a nutrition facts panel, a Guideline Daily Amount (GDA) label and health-related claims, respectively. Only 4691 (65·1 %) and 2484 (34·5 %) of the products that displayed the nutrition facts or a GDA label, respectively, followed the guidelines of the Thai Food and Drug Administration. In total, 4689 products (65·1 %) could be classified according to the Thai Nutrient Profile Model, of which 432 products (9·2 %) were classified as healthier. Moreover, among the 1487 products carrying health-related claims, 1219 (82·0 %) were classified as less healthy. Allowing less healthy food products to carry claims could mislead consumers and result in overconsumption of ready-to-eat food products. The findings suggest effective policies should be implemented to increase the relative availability of healthier ready-to-eat packaged foods, as well as to improve the provision of nutrition information on labels in Thailand.

Applied information science, engineering and technology selected topics from the field of production information engineering and IT for manufacturing : theory and practice

CERN Document Server

Tóth, Tibor

2014-01-01

The objective of the book is to give a selection from the papers, which summarize several important results obtained within the framework of the József Hatvany Doctoral School operating at the University of Miskolc, Hungary. In accordance with the three main research areas of the Doctoral School established for Information Science, Engineering and Technology, the papers can be classified into three groups. They are as follows: (1) Applied Computational Science; (2) Production Information Engineering (IT for Manufacturing included); (3) Material Stream Systems and IT for Logistics. As regards the first area, some papers deal with special issues of algorithms theory and its applications, with computing algorithms for engineering tasks, as well as certain issues of data base systems and knowledge intensive systems. Related to the second research area, the focus is on Production Information Engineering with special regard to discrete production processes. In the second research area the papers show some new inte...

FY 1998 annual summary report on shared product life-cycle total information system. 3; 1998 nendo joho kyoyugata product lifecycle system ni kansuru chosa hokokusho. 3

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

Recycling resources is gaining importance increasingly to correspond to global environmental problems. In urban areas, in particular, it is important to efficiently recover and recycle used large-size consumer products, e.g., home electric appliances and automobiles, which are discharged in large quantities. This study proposes a shared product life-cycle total information system, based on recognition that material recycling systems, encompassing stock materials, product production, consumption, and disposal and recycling of wastes, are essential. This system corresponds a material to information, in an attempt to realize more efficient recycling of products. The study for this fiscal year was focused on use of information modules attached to products and their members, product recycling systems using these modules, necessity for and problems involved in thermal recycle systems, problems involved in recycling home electric appliances and extraction of the data for their recycling, and material recycling process systems for home electric appliances and automobiles. (NEDO)

Institutional analysis of biofuel production in Northern Ghana

OpenAIRE

Kwoyiga, Lydia

2013-01-01

The thesis studied the nature of institutional arrangement around biofuel production and how this arrangement has shaped the production outcome of biofuel companies and community development. The study was conducted in two communities of the Yendi Municipal Assembly of the Northern Region of Ghana. In this area, a biofuel company called Biofuel Africa Limited has acquired areas of land and cultivated Jatropha plantations. A total of 32 informants were interviewed to arrive at information ne...

Resting egg production induced by food limitation in the calanoid copepod Acartia tonsa

DEFF Research Database (Denmark)

Drillet, Guillaume; Hansen, Benni W.; Kiørboe, Thomas

2011-01-01

Three populations of the copepod Acartia tonsa, two from the Baltic Sea and one from the U.S. East Coast, were compared for resting egg production at conditions of saturating and limiting food availability. All three populations produced eggs that hatched within 72 h when incubated at 17°C...... (subitaneous eggs), but the two Baltic populations in addition produced eggs that hatched at a much slower rate, in the course of a month (delayed hatching eggs [DHE]). Such eggs were not produced by the U.S. population. The fraction of DHE increased when food was limiting. Females from a Baltic population...... that were incubated individually all produced subitaneous eggs, but about half the females consistently also produced DHE. Cold storage that mimicked boreal winter conditions synchronized the hatching of DHE after extended storage, indicating that spring hatching of DHE might seed the water column...

Relevance of microbial finished product testing in food safety management

NARCIS (Netherlands)

Zwietering, M.H.; Jacxsens, L.; Membre, J.M.; Nauta, M.; Peterz, M.

2016-01-01

Management of microbiological food safety is largely based on good design of processes, products and procedures. Finished product testing may be considered as a control measure at the end of the production process. However, testing gives only very limited information on the safety status of a food.

Technical and management information system: The tool for professional productivity on the space station program

Science.gov (United States)

Montoya, G.; Boldon, P.

1985-01-01

The Space Station Program is highly complex not only in its technological goals and requirements but also in its organizational structure. Eight Contractor teams supporting four NASA centers plus Headquarters must depend on effective exchange of information--the lifeblood of the program. The Technical and Management Information System (TMIS) is the means by which this exchange can take place. Value of the TMIS in increasing productivity comes primarily from its ability to make the right information available to whomever needs it when it is needed. Productivity of the aerospace professional and how it can be enhanced by the use of specifically recommended techniques and procedures for information management using the TMIS are discussed.

Set of information technologies and their role in automation of agricultural production

OpenAIRE

V. V. Al’t

2018-01-01

The modern enterprises of agrarian and industrial complex are characterized by the high level of automation of technological processes. The technological development level conformto 5th and 6th technology revolutions. The automatic and automated technologies in crop production and livestock production use data of internet technologies, Global Positioning Satellite survey and observations, mashine and tractor aggregates automated operating. The models nucleus and row of information models of a...

Solar energy; Product information. Zonne-energie; Produktinformatie

Energy Technology Data Exchange (ETDEWEB)

Kruisheer, N

1992-03-20

In five brief articles product information is given on solar energy applications with special attention to the Netherlands. After an introduction on solar energy availability in the Netherlands the developments in solar boiler techniques are dealt with. Solar water heaters have advantages for the environment, and government subsidies stimulate different uses of such water heaters. Also the developments of solar cells show good prospects, not only for developing countries, but also for the industrialized countries. In brief the developments in solar energy storage and the connection of solar equipment to the grid are discussed. Finally attention is paid to the applications of passive solar energy in the housing construction, the use of transparent thermal insulation and the developments of translucent materials. 18 figs., 18 ills.

Interactive effects of carbon footprint information and its accessibility on value and subjective qualities of food products.

Science.gov (United States)

Kimura, Atsushi; Wada, Yuji; Kamada, Akiko; Masuda, Tomohiro; Okamoto, Masako; Goto, Sho-ichi; Tsuzuki, Daisuke; Cai, Dongsheng; Oka, Takashi; Dan, Ippeita

2010-10-01

We aimed to explore the interactive effects of the accessibility of information and the degree of carbon footprint score on consumers' value judgments of food products. Participants (n=151, undergraduate students in Japan) rated their maximum willingness to pay (WTP) for four food products varying in information accessibility (active-search or read-only conditions) and in carbon footprint values (low, middle, high, or non-display) provided. We also assessed further effects of information accessibly and carbon footprint value on other product attributes utilizing the subjective estimation of taste, quality, healthiness, and environmental friendliness. Results of the experiment demonstrated an interactive effect of information accessibility and the degree of carbon emission on consumer valuation of carbon footprint-labeled food. The carbon footprint value had a stronger impact on participants' WTP in the active-search condition than in the read-only condition. Similar to WTP, the results of the subjective ratings for product qualities also exhibited an interactive effect of the two factors on the rating of environmental friendliness for products. These results imply that the perceived environmental friendliness inferable from a carbon footprint label contributes to creating value for a food product.

Matrix-product states for strongly correlated systems and quantum information processing

International Nuclear Information System (INIS)

Saberi, Hamed

2008-01-01

This thesis offers new developments in matrix-product state theory for studying the strongly correlated systems and quantum information processing through three major projects: In the first project, we perform a systematic comparison between Wilson's numerical renormalization group (NRG) and White's density-matrix renormalization group (DMRG). The NRG method for solving quantum impurity models yields a set of energy eigenstates that have the form of matrix-product states (MPS). White's DMRG for treating quantum lattice problems can likewise be reformulated in terms of MPS. Thus, the latter constitute a common algebraic structure for both approaches. We exploit this fact to compare the NRG approach for the single-impurity Anderson model to a variational matrix-product state approach (VMPS), equivalent to single-site DMRG. For the latter, we use an ''unfolded'' Wilson chain, which brings about a significant reduction in numerical costs compared to those of NRG. We show that all NRG eigenstates (kept and discarded) can be reproduced using VMPS, and compare the difference in truncation criteria, sharp vs. smooth in energy space, of the two approaches. Finally, we demonstrate that NRG results can be improved upon systematically by performing a variational optimization in the space of variational matrix-product states, using the states produced by NRG as input. In the second project we demonstrate how the matrix-product state formalism provides a flexible structure to solve the constrained optimization problem associated with the sequential generation of entangled multiqubit states under experimental restrictions. We consider a realistic scenario in which an ancillary system with a limited number of levels performs restricted sequential interactions with qubits in a row. The proposed method relies on a suitable local optimization procedure, yielding an efficient recipe for the realistic and approximate sequential generation of any entangled multiqubit state. We give

Matrix-product states for strongly correlated systems and quantum information processing

Energy Technology Data Exchange (ETDEWEB)

Saberi, Hamed

2008-12-12

This thesis offers new developments in matrix-product state theory for studying the strongly correlated systems and quantum information processing through three major projects: In the first project, we perform a systematic comparison between Wilson's numerical renormalization group (NRG) and White's density-matrix renormalization group (DMRG). The NRG method for solving quantum impurity models yields a set of energy eigenstates that have the form of matrix-product states (MPS). White's DMRG for treating quantum lattice problems can likewise be reformulated in terms of MPS. Thus, the latter constitute a common algebraic structure for both approaches. We exploit this fact to compare the NRG approach for the single-impurity Anderson model to a variational matrix-product state approach (VMPS), equivalent to single-site DMRG. For the latter, we use an ''unfolded'' Wilson chain, which brings about a significant reduction in numerical costs compared to those of NRG. We show that all NRG eigenstates (kept and discarded) can be reproduced using VMPS, and compare the difference in truncation criteria, sharp vs. smooth in energy space, of the two approaches. Finally, we demonstrate that NRG results can be improved upon systematically by performing a variational optimization in the space of variational matrix-product states, using the states produced by NRG as input. In the second project we demonstrate how the matrix-product state formalism provides a flexible structure to solve the constrained optimization problem associated with the sequential generation of entangled multiqubit states under experimental restrictions. We consider a realistic scenario in which an ancillary system with a limited number of levels performs restricted sequential interactions with qubits in a row. The proposed method relies on a suitable local optimization procedure, yielding an efficient recipe for the realistic and approximate sequential generation of any

Information Interaction Criteria Among Students in Process of Task-Based Information Searching (Role of Objective Complexity and Type of Product

Directory of Open Access Journals (Sweden)

Marziyeh Saeedizadeh

2016-08-01

Full Text Available Purpose:  human-information interactions must be considered in order to be able to interactively design Information Retrieval Systems (IRS. In this regard, study of users’ interactions must be based on their socio-cultural context (specifically work tasks. Accordingly, this paper aims to explore the use of information-interaction criteria among students in the information searching process according to different kinds of their work tasks.  Methodology: This research is applied qualitative method using exploratory study. The research population consisted of MSc students of Ferdowsi university of Mashhad enrolled in 2012-13  academic year. In 3 stages of sampling (random stratified, quota, and voluntary sampling, 30 cases were selected. Each of these cases searched 6 different types of simulated work tasks. Interaction criteria were extracted ? Content analysis of aloud thinking reports. Validity of tools was verified through Faculties of KIS at Ferdowsi university of Mashhad. Also,0.78  Kripendorff’s alpha ratio based on an agreement between the inter – coder indicates the Dependability  of content analysis. Findings: The findings show that in addition to ‘topic’ criteria, other interaction criteria impact on information- interaction of users, such as: ‘search results ranking’, ‘domain knowledge of user’, ‘layout’, ‘type of information resource’ and etc. based on the level of objective complexity and product of  work tasks, information-interaction criteria change. Conclusion: the users pay attention to different information-interaction criteria in process of information searching, considering to variety of work tasks (level of objective complexity and product. So, it is necessary to pay attention to work task characteristics in order to design interactive and personalized IR systems.

Environmental Product Development Combining the Life Cycle Perspective with Chemical Hazard Information

DEFF Research Database (Denmark)

Askham, Cecilia

in the design or redesign process. This thesis concerns marrying the life cycle perspective with chemical hazard information, in order to advance the practice of environmental product development, and hence takes further steps towards sustainable development. The need to consider the full value chain...... for the life cycle of products meant that systems theory and systems engineering principles were important in this work. Life cycle assessment methodology was important for assessing environmental impacts for case products. The new European regulation for chemicals (REACH) provided the main driver......Concerns regarding the short- and long-term detrimental effects of chemicals on human health and ecosystems have made the minimisation of chemical hazards a vitally important issue. If sustainable development is to be achieved, environmental efficient products (and product life cycles...

Limits on production of anomalous secondaries in deuteron-deuteron collisions at 7.9 GeV/c

International Nuclear Information System (INIS)

Clarke, R.L.; Hardy, J.E.; Hemingway, R.J.

1983-01-01

A search has been made in bubble-chamber film of 7.9-GeV/c deuteron-deuteron interactions for anomalous behavior of the collision fragments. No positive effect is seen in the distribution of secondary mean free paths, although stringent limits are placed on the primary production rate

78 FR 9336 - Production of FHFA Records, Information, and Employee Testimony in Legal Proceedings

Science.gov (United States)

2013-02-08

... timely notice and centralized, objective decision making. The United States Supreme Court upheld this..., Information, and Employee Testimony in Legal Proceedings AGENCY: Federal Housing Finance Agency. ACTION... (FHFA) proposes a regulation governing the production of FHFA records, information or employee testimony...

All-source Information Management and Integration for Improved Collective Intelligence Production

Science.gov (United States)

2011-06-01

Intelligence (ELINT) • Open Source Intelligence ( OSINT ) • Technical Intelligence (TECHINT) These intelligence disciplines produce... intelligence , measurement and signature intelligence , signals intelligence , and open - source data, in the production of intelligence . All- source intelligence ...All- Source Information Integration and Management) R&D Project 3 All- Source Intelligence

Information Reference Models for European Pork Supply Networks - Identifying Gaps in Information Infrastructures

DEFF Research Database (Denmark)

Lehmann, Richard J.; Hermansen, John Erik; Fritz, Melanie

2011-01-01

Several global developments such as diminishing production resources, limits in the availability of water and the growing demand for bio-energy as well as sector-wide crises (e.g. BSE, swine fever, dioxin) have led to a changing attitude of society towards the conse-quences of the food system......‘s activities for social, economic and environmental issues, cap-tured in the term of sustainability. As a consequence, consumers show increasing interest in the characteristics of food, and in turn, on the availability of related information and guaran-tees. The paper introduces different information reference...

Yeast biomass production: a new approach in glucose-limited feeding strategy

Directory of Open Access Journals (Sweden)

Érika Durão Vieira

2013-01-01

Full Text Available The aim of this work was to implement experimentally a simple glucose-limited feeding strategy for yeast biomass production in a bubble column reactor based on a spreadsheet simulator suitable for industrial application. In biomass production process using Saccharomyces cerevisiae strains, one of the constraints is the strong tendency of these species to metabolize sugars anaerobically due to catabolite repression, leading to low values of biomass yield on substrate. The usual strategy to control this metabolic tendency is the use of a fed-batch process in which where the sugar source is fed incrementally and total sugar concentration in broth is maintained below a determined value. The simulator presented in this work was developed to control molasses feeding on the basis of a simple theoretical model in which has taken into account the nutritional growth needs of yeast cell and two input data: the theoretical specific growth rate and initial cell biomass. In experimental assay, a commercial baker's yeast strain and molasses as sugar source were used. Experimental results showed an overall biomass yield on substrate of 0.33, a biomass increase of 6.4 fold and a specific growth rate of 0.165 h-1 in contrast to the predicted value of 0.180 h-1 in the second stage simulation.

78 FR 35279 - Agency Information Collection Activities; Proposed Collection; Comment Request; Electronic Products

Science.gov (United States)

2013-06-12

... proposed extension of an existing collection of information, and to allow 60 days for public comment in...)(2)(A) of the PRA (44 U.S.C. 3506(c)(2)(A)) requires Federal Agencies to provide a 60-day notice in... Products'' FDA Form 3646 ``Mercury Vapor Lamp Products Radiation Safety Report'' FDA Form 3647 ``Guide for...

On the Use of Time-Limited Information for Maintenance Decision Support: A Predictive Approach under Maintenance Constraints

Directory of Open Access Journals (Sweden)

E. Khoury

2013-01-01

Full Text Available This paper deals with a gradually deteriorating system operating under an uncertain environment whose state is only known on a finite rolling horizon. As such, the system is subject to constraints. Maintenance actions can only be planned at imposed times called maintenance opportunities that are available on a limited visibility horizon. This system can, for example, be a commercial vehicle with a monitored critical component that can be maintained only in some specific workshops. Based on the considered system, we aim to use the monitoring data and the time-limited information for maintenance decision support in order to reduce its costs. We propose two predictive maintenance policies based, respectively, on cost and reliability criteria. Classical age-based and condition-based policies are considered as benchmarks. The performance assessment shows the value of the different types of information and the best way to use them in maintenance decision making.

Information theory explanation of the fluctuation theorem, maximum entropy production and self-organized criticality in non-equilibrium stationary states

CERN Document Server

Dewar, R

2003-01-01

Jaynes' information theory formalism of statistical mechanics is applied to the stationary states of open, non-equilibrium systems. First, it is shown that the probability distribution p subGAMMA of the underlying microscopic phase space trajectories GAMMA over a time interval of length tau satisfies p subGAMMA propor to exp(tau sigma subGAMMA/2k sub B) where sigma subGAMMA is the time-averaged rate of entropy production of GAMMA. Three consequences of this result are then derived: (1) the fluctuation theorem, which describes the exponentially declining probability of deviations from the second law of thermodynamics as tau -> infinity; (2) the selection principle of maximum entropy production for non-equilibrium stationary states, empirical support for which has been found in studies of phenomena as diverse as the Earth's climate and crystal growth morphology; and (3) the emergence of self-organized criticality for flux-driven systems in the slowly-driven limit. The explanation of these results on general inf...

Educational productivity in higher education : An examination of part of the Walberg Educational Productivity Model

NARCIS (Netherlands)

Bruinsma, M.; Jansen, E. P. W. A.

Several factors in the H. J. Walberg Educational Productivity Model, which assumes that 9 factors affect academic achievement, were examined with a limited sample of 1st-year students in the University of Groningen. Information concerning 8 of these factors - grades, motivation, age, prior

Pricing Power of Agricultural Products under the Background of Small Peasant Management and Information Asymmetry

Institute of Scientific and Technical Information of China (English)

Dexuan LI

2016-01-01

From the background of small peasant management and information asymmetry,this paper introduced the middle profit sharing model and discussed influence factors and ownership of pricing power of agricultural products. It obtained following results:( i) the transaction scale has positive effect on farmer’s pricing power of agricultural products,while the competitor’s transaction scale has negative effect on it,so does the cost for information search;( ii) under the condition of small peasant management system,farmer is in a relatively weak position in the distribution of pricing power of agricultural products,due to factors such as small transaction scale,information asymmetry and farmer’s weak negotiation ability;( iii) through cooperative game,farmer and buyers can share cooperative surplus at the agreed ratio;( iv) the introduction of self-organizing specialized farmers cooperatives is favorable for solving the problem of pricing power of agricultural products,and possible problems,such as " collective action dilemma" and " fake cooperatives" in the cooperative development process can be solved by internal and external division of labor and specialization of cooperatives.

Agricultural production in the United States by county: a compilation of information from the 1974 census of agriculture for use in terrestrial food-chain transport and assessment models

Energy Technology Data Exchange (ETDEWEB)

Shor, R.W.; Baes, C.F. III; Sharp, R.D.

1982-01-01

Terrestrial food-chain models that simulate the transport of environmentally released radionuclides incorporate parameters describing agricultural production and practice. Often a single set of default parameters, such as that listed in USNRC Regulatory Guide 1.109, is used in lieu of site-specific information. However, the geographical diversity of agricultural practice in the United States suggests the limitations of a single set of default parameters for assessment models. This report documents default parameters with a county-wide resolution based on analysis of the 1974 US Census of Agriculture for use in terrestrial food chain models. Data reported by county, together with state-based information from the US Department of Agriculture, Economic and Statistics Service, provided the basis for estimates of model input parameters. This report also describes these data bases, their limitations, and lists default parameters by county. Vegetable production is described for four categories: leafy vegetables; vegetables and fruits exposed to airborne material; vegetables, fruits, and nuts protected from airborne materials; and grains. Livestock feeds were analyzed in categories of hay, silage, pasture, and grains. Pasture consumption was estimated from cattle and sheep inventories, their feed requirements, and reported quantities of harvested forage. The results were compared with assumed yields of the pasture areas reported. In addition, non-vegetable food production estimates including milk, beef, pork, lamb, poultry, eggs, goat milk, and honey are described. The agricultural parameters and land use information - in all 47 items - are tabulated in four appendices for each of the 3067 counties of the US reported to the Census of Agriculture, excluding those in Hawaii and Alaska.

Agricultural production in the United States by county: a compilation of information from the 1974 census of agriculture for use in terrestrial food-chain transport and assessment models

International Nuclear Information System (INIS)

Shor, R.W.; Baes, C.F. III; Sharp, R.D.

1982-01-01

Terrestrial food-chain models that simulate the transport of environmentally released radionuclides incorporate parameters describing agricultural production and practice. Often a single set of default parameters, such as that listed in USNRC Regulatory Guide 1.109, is used in lieu of site-specific information. However, the geographical diversity of agricultural practice in the United States suggests the limitations of a single set of default parameters for assessment models. This report documents default parameters with a county-wide resolution based on analysis of the 1974 US Census of Agriculture for use in terrestrial food chain models. Data reported by county, together with state-based information from the US Department of Agriculture, Economic and Statistics Service, provided the basis for estimates of model input parameters. This report also describes these data bases, their limitations, and lists default parameters by county. Vegetable production is described for four categories: leafy vegetables; vegetables and fruits exposed to airborne material; vegetables, fruits, and nuts protected from airborne materials; and grains. Livestock feeds were analyzed in categories of hay, silage, pasture, and grains. Pasture consumption was estimated from cattle and sheep inventories, their feed requirements, and reported quantities of harvested forage. The results were compared with assumed yields of the pasture areas reported. In addition, non-vegetable food production estimates including milk, beef, pork, lamb, poultry, eggs, goat milk, and honey are described. The agricultural parameters and land use information - in all 47 items - are tabulated in four appendices for each of the 3067 counties of the US reported to the Census of Agriculture, excluding those in Hawaii and Alaska

Software package as an information center product

International Nuclear Information System (INIS)

Butler, M.K.

1977-01-01

The Argonne Code Center serves as a software exchange and information center for the U.S. Energy Research and Development Administration and the Nuclear Regulatory Commission. The goal of the Center's program is to provide a means for sharing of software among agency offices and contractors, and for transferring computing applications and technology, developed within the agencies, to the information-processing community. A major activity of the Code Center is the acquisition, review, testing, and maintenance of a collection of software--computer systems, applications programs, subroutines, modules, and data compilations--prepared by agency offices and contractors to meet programmatic needs. A brief review of the history of computer program libraries and software sharing is presented to place the Code Center activity in perspective. The state-of-the-art discussion starts off with an appropriate definition of the term software package, together with descriptions of recommended package contents and the Carter's package evaluation activity. An effort is made to identify the various users of the product, to enumerate their individual needs, to document the Center's efforts to meet these needs and the ongoing interaction with the user community. Desirable staff qualifications are considered, and packaging problems, reviewed. The paper closes with a brief look at recent developments and a forecast of things to come. 2 tables

The interactive effects of affect and shopping goal on information search and product evaluations.

Science.gov (United States)

Chen, Fangyuan; Wyer, Robert S; Shen, Hao

2015-12-01

Although shoppers often want to evaluate products to make a purchase decision, they can also shop for enjoyment. In each case, the amount of time they spend on shopping and the number of options they consider can depend on the mood they happen to be in. We predicted that mood can signal whether the goal has been attained and when people should stop processing information. When people are primarily motivated to purchase a particular type of product, positive mood signals that they have done enough. Thus, they consider less information if they are happy than if they are unhappy. When people shop for enjoyment, however, positive mood signals that they are still having fun. Thus, they consider more information when they are happy than when they are not. Four experiments among university students (N = 827) examined these possibilities. Experiment 1 provided initial evidence for the interactive effects of mood and goals on search behavior and product evaluation. Other studies examined the implications of this conceptualization for different domains: (a) the relative impact of brand and attribute information on judgments (Experiment 2), (b) gender differences in shopping behavior (Experiment 3), and (c) the number of options that people review in an actual online shopping website (Experiment 4). (c) 2015 APA, all rights reserved).

Intake to Production Ratio

DEFF Research Database (Denmark)

Nazaroff, William; Weschler, Charles J.; Little, John C.

2012-01-01

BACKGROUND: Limited data are available to assess human exposure to thousands of chemicals currently in commerce. Information that relates human intake of a chemical to its production and use can help inform understanding of mechanisms and pathways that control exposure and support efforts...... to protect public health.OBJECTIVES: We introduce the intake-to-production ratio (IPR) as an economy-wide quantitative indicator of the extent to which chemical production results in human exposure.METHODS: The IPR was evaluated as the ratio of two terms: aggregate rate of chemical uptake in a human......(n-butyl) phthalate, 1,040 ppm for para-dichlorobenzene, 6,800 ppm for di(isobutyl) phthalate, 7,700 ppm for diethyl phthalate, and 8,000-24,000 ppm (range) for triclosan.CONCLUSION: The IPR is well suited as an aggregate metric of exposure intensity for characterizing population-level exposure to synthesized...

The public production and sharing of medical information. An Australian perspective

Directory of Open Access Journals (Sweden)

Henry C.H. Ko

2010-03-01

Full Text Available There is a wealth of medical information now available to the public through various sources that are not necessarily controlled by medical or healthcare professionals. In Australia there has been a strong movement in the health consumer arena of consumer-led sharing and production of medical information and in healthcare decision-making. This has led to empowerment of the public as well as increased knowledge-sharing. There are some successful initiatives and strategies on consumer- and public-led sharing of medical information, including the formation of specialised consumer groups, independent medical information organisations, consumer peer tutoring, and email lists and consumer networking events. With well-organised public initiatives and networks, there tends to be fairly balanced information being shared. However, there needs to be caution about the use of publicly available scientific information to further the agenda of special-interest groups and lobbying groups to advance often biased and unproven opinions or for scaremongering. With the adoption of more accountability of medical research, and the increased public scrutiny of private and public research, the validity and quality of medical information reaching the public is achieving higher standards.

Usage patterns of personal care products: Important factors for exposure assessment

NARCIS (Netherlands)

Biesterbos, J.W.H.; Dudzina, T.; Delmaar, C.J.; Bakker, M.I.; Russel, F.G.M.; Goetz, N. von; Scheepers, P.T.J.; Roeleveld, N.

2013-01-01

Complete information regarding the use of personal care products (PCPs) by consumers is limited, but such information is crucial for realistic consumer exposure assessment. To fill this gap, a database was created with person-oriented information regarding usage patterns and circumstances of use for

Estimation of snowfall limit for the Kashmir Valley, Indian Himalayas, with TRMM PR Bright Band information

Directory of Open Access Journals (Sweden)

S. Schauwecker

2016-09-01

Full Text Available Knowing the height of the snowfall limit during precipitation events is crucial for better understanding a number of hydro-climatic processes, for instance glacier-climate interactions or runoff from high mountain catchments. However, knowledge on heights of the phase change during precipitation events is limited by the small number of meteorological measurements available at high altitudes, such as the Himalayas. The bright band (BB of satellite based radar data may be a promising proxy for the snow/rain transition during particular stratiform precipitation events over high mountain regions. The BB is a horizontal layer of stronger radar reflectivity caused by the melting of hydrometeors at the level where solid precipitation turns into rain. Here, we present BB heights detected by the Tropical Rainfall Measuring Mission (TRMM Precipitation Radar (PR 2A23 algorithm over a mountainous area. To assess the performance of BB heights, we have compared a 17‑year data set of BB estimations of the TRMM PR with radiosonde observations and meteorological station data from Srinagar, Kashmir Valley, India. During March to November, the BB lies mostly about 200 to 800 m below the freezing level (FL recorded by radiosondes. The correlation between BB and FL heights extrapolated from a ground-based station is smaller and depends on the timing of the air temperature measurement – an important finding for applying extrapolation techniques in data sparse regions. Further on, we found a strong seasonal and monthly variability of the BB height, e.g. extending in summer months from about 2700 m to almost 6000 m asl. Comparison with near surface rain intensity from the TRMM PR product 2A25 indicates that – during intense monsoonal summer precipitation events – the BB height is concentrated between about 3500 and 4000 m asl. We can conclude that TRMM PR BB data deliver valuable complementary information for regional or seasonal variability

Investment in secreted enzymes during nutrient-limited growth is utility dependent.

Science.gov (United States)

Cezairliyan, Brent; Ausubel, Frederick M

2017-09-12

Pathogenic bacteria secrete toxins and degradative enzymes that facilitate their growth by liberating nutrients from the environment. To understand bacterial growth under nutrient-limited conditions, we studied resource allocation between cellular and secreted components by the pathogenic bacterium Pseudomonas aeruginosa during growth on a protein substrate that requires extracellular digestion by secreted proteases. We identified a quantitative relationship between the rate of increase of cellular biomass under nutrient-limiting growth conditions and the rate of increase in investment in secreted proteases. Production of secreted proteases is stimulated by secreted signals that convey information about the utility of secreted proteins during nutrient-limited growth. Growth modeling using this relationship recapitulated the observed kinetics of bacterial growth on a protein substrate. The proposed regulatory strategy suggests a rationale for quorum-sensing-dependent stimulation of the production of secreted enzymes whereby investment in secreted enzymes occurs in proportion to the utility they confer. Our model provides a framework that can be applied toward understanding bacterial growth in many environments where growth rate is limited by the availability of nutrients.

The impact of product information and trials on demand for smokeless tobacco and cigarettes: evidence from experimental auctions.

Science.gov (United States)

Rousu, Matthew C; O'Connor, Richard J; Thrasher, James F; June, Kristie M; Bansal-Travers, Maansi; Pitcavage, James

2014-03-01

Epidemiological and toxicological evidence suggests lower risk of smokeless tobacco (ST) products compared to cigarettes. Less is known, however, about consumer perceptions and use of novel forms of ST, including snus and dissolvable tobacco. In this study, we conducted in-person experimental auctions in Buffalo, NY, Columbia, SC, and Selinsgrove, PA with 571 smokers to test the impact of information and product trials on smokers' preferences. Auctions were conducted between November 2010-November 2011. We found no evidence of an impact of product trials on demand in our auctions. Anti-ST information increased demand for cigarettes when presented alone, but when presented with pro-ST information it decreased demand for cigarettes. It did not decrease demand for ST products. Anti-smoking information increased demand for ST products, but did not affect cigarette demand. These findings suggest that credible and effective communications about tobacco harm reduction should reinforce the negative effects of smoking. Copyright © 2013 Elsevier Inc. All rights reserved.

Phytoplankton Virus Production Negatively Affected by Iron Limitation

NARCIS (Netherlands)

Slagter, H.A.; Gerringa, L.J.A.; Brussaard, C.P.D.

2016-01-01

Fe-limited monocultures of the ubiquitous algae Micromonas pusilla and Phaeocystis globosa were infected with their respective viruses (MpV and PgV) to ascertain the effect of Fe-limitation on phytoplankton host-virus dynamics. The effect of the viral shunt on Fe concentrations and bioavailability

Compliance of feed limits, does not mean compliance of food limits

NARCIS (Netherlands)

Raamsdonk, van L.W.D.; Eijkeren, van J.C.H.; Meijer, G.A.L.; Rennen, M.; Zeilmaker, M.J.; Hoogenboom, L.A.P.; Mengelers, M.J.B.

2009-01-01

The carry-over of contaminants from feed to animal food products is an important aspect of the animal production chain. For a proper containment, limits for feed as well food products are fixed for a series of chemicals, e.g. dioxins and dioxin-like PCBs, lead, cadmium, some chlorinated pesticides,

Development of an instrument for direct ozone production rate measurements: measurement reliability and current limitations

Science.gov (United States)

Sklaveniti, Sofia; Locoge, Nadine; Stevens, Philip S.; Wood, Ezra; Kundu, Shuvashish; Dusanter, Sébastien

2018-02-01

. This type of investigations allows checking whether our understanding of the turnover point between NOx-limited and NOx-saturated regimes of ozone production is well understood and does not require measuring ambient OPR but instead only probing the change in ozone production when NO is added. During IRRONIC, changes in ozone production rates ranging from the limit of detection (3σ) of 6.2 ppbv h-1 up to 20 ppbv h-1 were observed when 6 ppbv of NO was added into the flow tubes.

Work Limitations 4 Years After Mild Traumatic Brain Injury: A Cohort Study.

Science.gov (United States)

Theadom, Alice; Barker-Collo, Suzanne; Jones, Kelly; Kahan, Michael; Te Ao, Braden; McPherson, Kathryn; Starkey, Nicola; Feigin, Valery

2017-08-01

To explore employment status, work limitations, and productivity loss after mild traumatic brain injury (TBI). Inception cohort study over 4 years. General community. Adults (N=245; >16y at the time of injury) who experienced a mild TBI and who were employed prior to their injury. Not applicable. Details of the injury, demographic information, and preinjury employment status were collected from medical records and self-report. Symptoms and mood were assessed 1 month postinjury using the Rivermead Post-Concussion Symptom Questionnaire and the Hospital Anxiety and Depression Scale. Postinjury employment status and work productivity were assessed 4 years postinjury using the Work Limitations Questionnaire. Four years after mild TBI, 17.3% of participants had exited the workforce (other than for reasons of retirement or to study) or had reduced their working hours compared with preinjury. A further 15.5% reported experiencing limitations at work because of their injury. Average work productivity loss was 3.6%. The symptom of taking longer to think 1 month postinjury significantly predicted work productivity loss 4 years later (β=.47, t=3.79, P≤.001). Although changes in employment status and difficulties at work are likely over time, the results indicate increased unemployment rates, work limitations, and productivity loss in the longer term after a mild TBI. Identification of cognitive difficulties 1 month after TBI in working aged adults and subsequent interventions to address these difficulties are required to facilitate work productivity. Copyright © 2016 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.

Limited consensus around ARM information protection practices1

African Journals Online (AJOL)

KATUU, Shadrack

surrounding Information Protection (IP) has been ... compares IP and ARM information protection through .... decision-making methodology used to help ... and differing requirements of institutions into account. ARM literature is prescriptive with.

Nitrogen and carbon limitation of planktonic primary production and phytoplankton-bacterioplankton coupling in ponds on the McMurdo Ice Shelf, Antarctica

DEFF Research Database (Denmark)

Sorrell, B.K.; Hawes, I.; Safi, K.

2013-01-01

The nature of nutrient limitation and coupling of planktonic primary and secondary production were investigated in meltwater ponds of the Ross Ice Shelf, Antarctica, using regression tree analysis and multiple regression. Phytoplankton were primaril N-limited but inorganic carbon apparently co...

40 CFR 414.91 - Toxic pollutant effluent limitations and standards for direct discharge point sources that use...

Science.gov (United States)

2010-07-01

..., production, and sampling and analysis information. Effluent characteristics Effluent limitations BAT and NSPS...-Dinitrophenol 123 71 2,4-Dinitrotoluene 285 113 2,6-Dinitrotoluene 641 255 Ethylbenzene 108 32 Fluoranthene 68...

Co-digestion of sewage sludge and sterilized solid slaughterhouse waste: methane production efficiency and process limitations.

Science.gov (United States)

Pitk, Peep; Kaparaju, Prasad; Palatsi, Jordi; Affes, Rim; Vilu, Raivo

2013-04-01

The rendering product of Category 2 and 3 Animal By-Products is known as sterilized mass (SM) and it is mainly composed of fat and proteins, making it interesting substrate for anaerobic digestion. Batch and semi-continuous laboratory experiments were carried out to investigate the effect of SM addition in co-digestion with sewage sludge on methane production and possible process limitations. Results showed that SM addition in the feed mixture up to 5% (w/w), corresponding to 68.1% of the organic loading, increased methane production 5.7 times, without any indication of process inhibition. Further increase of SM addition at 7.5% (w/w) caused methane production decrease and volatile solids removal reduction, that was mainly related to remarkably increased free ammonia concentration in the digester of 596.5±68.6 gNH3 L(-1). Sterilized mass addition of 10% (w/w) caused intensive foaming, LCFA accumulation of 9172±701.2 mgCOD-LCFA g(-1) sample and termination of the experiment. Copyright © 2013 Elsevier Ltd. All rights reserved.

Giving information on medicinal products to the general public--in search of a definition to safeguard the patient.

Science.gov (United States)

Faeh, Andrea

2014-04-01

Information on medicinal products is vital for enabling patients to give informed consent to the use of a specific product. Within the European Union (EU) the debate about how much information about prescription-only medicinal products should be made available to patients has gone on for the past five years with no definite conclusion yet. This contribution assesses the current legislation and the ongoing debate in order to identify the challenges and the prospect of new legislation, and consider its potential implications for the scope for advertising and for patient safety.

A state-of-the-art production information management system: Conception to completion

International Nuclear Information System (INIS)

Parker, A.R.; Corston, S.P.; Abdallah, F.F.

1994-01-01

The task of hydrocarbon production accounting for oil and gas development projects can be extremely complex and time consuming, especially if Joint Venture Partner (JVP) ownership varies over several inter-related producing projects. For this task to be carried out quickly and accurately a diverse range of computer software and hardware is usually employed. This paper explains the planning, specifications and construction of an online Management Information System for hydrocarbon production balancing, reconciliation and reporting over the North West Shelf Gas Project

A state-of-the-art production information management system: Conception to completion

Energy Technology Data Exchange (ETDEWEB)

Parker, A.R.; Corston, S.P.; Abdallah, F.F.

1994-12-31

The task of hydrocarbon production accounting for oil and gas development projects can be extremely complex and time consuming, especially if Joint Venture Partner (JVP) ownership varies over several inter-related producing projects. For this task to be carried out quickly and accurately a diverse range of computer software and hardware is usually employed. This paper explains the planning, specifications and construction of an online Management Information System for hydrocarbon production balancing, reconciliation and reporting over the North West Shelf Gas Project.

Comprehending product warning information: age-related effects and the roles of memory, inferencing, and knowledge.

Science.gov (United States)

Hancock, Holly E; Fisk, Arthur D; Rogers, Wendy A

2005-01-01

Two experiments were conducted to determine if age affects comprehension for explicit and implied warning information and, if so, to reveal the nature of such effects. Experiment 1 measured younger (18-23 years) and older (65-75 years) adults' comprehension for real-world warnings via a verification test presented immediately after reading the warnings or after a delay. In Experiment 2, younger (18-22 years) and older (64-76 years) participants also read fabricated warnings that were inconsistent with real-world knowledge. In both experiments, older adults frequently failed to infer the correct hazard and safety information. The older adults also had trouble understanding warning information even when it was explicitly stated (when no inferences were required), especially when memory demands were high and product-specific knowledge could not be used. That many of the older adults did not understand commonly used product warnings indicates that the wording on many household products is not conducive to being understood by everyone who uses them. Actual or potential applications of this research include the recommendation that designers of product labels, warnings, and instructions should consider minimizing memory load and maximizing opportunities for knowledge application when designing consumer warnings.

Developing Information Services and Tools to Access and Evaluate Data Quality in Global Satellite-based Precipitation Products

Science.gov (United States)

Liu, Z.; Shie, C. L.; Meyer, D. J.

2017-12-01

Global satellite-based precipitation products have been widely used in research and applications around the world. Compared to ground-based observations, satellite-based measurements provide precipitation data on a global scale, especially in remote continents and over oceans. Over the years, satellite-based precipitation products have evolved from single sensor and single algorithm to multi-sensors and multi-algorithms. As a result, many satellite-based precipitation products have been enhanced such as spatial and temporal coverages. With inclusion of ground-based measurements, biases of satellite-based precipitation products have been significantly reduced. However, data quality issues still exist and can be caused by many factors such as observations, satellite platform anomaly, algorithms, production, calibration, validation, data services, etc. The NASA Goddard Earth Sciences (GES) Data and Information Services Center (DISC) is home to NASA global precipitation product archives including the Tropical Rainfall Measuring Mission (TRMM), the Global Precipitation Measurement (GPM), as well as other global and regional precipitation products. Precipitation is one of the top downloaded and accessed parameters in the GES DISC data archive. Meanwhile, users want to easily locate and obtain data quality information at regional and global scales to better understand how precipitation products perform and how reliable they are. As data service providers, it is necessary to provide an easy access to data quality information, however, such information normally is not available, and when it is available, it is not in one place and difficult to locate. In this presentation, we will present challenges and activities at the GES DISC to address precipitation data quality issues.

Information Based Productivity.

Science.gov (United States)

Bennett, Scott

A digital project undertaken last year at Yale (Connecticut) offers an opportunity to explore productivity matters. The project aimed at improving the quality of library support and of student learning in one of the most heavily enrolled undergraduate courses at Yale, "Introduction to the History of Art, from Prehistory to the…

Changing public perceptions of genetically modified foods: Effects of consumer information and direct product experience

DEFF Research Database (Denmark)

Scholderer, Joachim; Bech-Larsen, Tino; Grunert, Klaus G.

and values. Two policies can be adopted in such a situation: (a) consumers can be actively informed regarding the risks and benefits and (b) consumers can be given the opportunity to evaluate products on the basis of direct experience. The effectiveness of both policies was tested in two experiments....... In experiment 1, attitude change experiments were conducted with consumers from Denmark, Germany, Italy and the UK (N=1650). Different information strategies were tested against a control group for their ability to change consumers' attitudes and their influence on product choice. Results indicate...... that no attitude change occured. Instead, all stategies seemed to bolster pre-existing attitudes, thereby significantly decreasing consumers' preferences for GM products. The effect did not occur when consumers only saw a labeled product example. In experiment 2, we tested the effects of direct experience...

Sensory shelf-life limiting factor of high hydrostatic pressure processed avocado paste.

Science.gov (United States)

Jacobo-Velázquez, D A; Hernández-Brenes, C

2011-08-01

High hydrostatic pressure (HHP) processing pasteurizes avocado paste without a significant impact on flavor. Although HHP-treated avocado paste stored under refrigeration is safe for human consumption for months, sensory changes taking place during storage cause the rejection of the product by consumers within days. Although it is known that the shelf life of the product ends before its microbial counts are high, its sensory shelf life limiting factor remains unknown. The present study focused on the use of a trained panel and a consumer panel to determine the sensory shelf life limiting factor of HHP-treated avocado paste. The trained panel identified sour and rancid flavors as the main sensory descriptors (critical descriptors) that differentiated stored from freshly processed samples. Further data obtained from consumers identified sour flavor as the main cause for a significant decrease in the acceptability (shelf life limiting factor) of refrigerated HHP-treated avocado paste. The study allowed the elucidation of a proposed deterioration mechanism for HHP-treated avocado paste during its refrigerated shelf life. The information through this work enhances scientific knowledge of the product and proposes the sour flavor development during storage as a relevant sensory attribute that needs to be improved in order to enhance the product shelf life. At present, HHP is the most effective commercial nonthermal technology to process avocado paste when compared to thermal and chemical alternatives. HHP-treated avocado paste is a microbiologically stable food for a period of at least 45 d stored under refrigeration. However, previous published work indicated that consumers rejected the product after approximately 19 d of storage due to sensory changes. This manuscript presents a sensory study that permitted the identification of the critical sensory descriptor that is acting as the sensory shelf life limiting factor of the product. The data presented herein along with

40 CFR 2.302 - Special rules governing certain information obtained under the Clean Water Act.

Science.gov (United States)

2010-07-01

..., installed, and used only for research purposes; and (B) Information concerning any product, method, device... PROTECTION AGENCY GENERAL PUBLIC INFORMATION Confidentiality of Business Information § 2.302 Special rules... proposed standard or limitation: (A) Information concerning research, or the results of research, on any...

DEVELOPMENT OF INFORMATION SERVICES AND PRODUCTS IN UZBEKISTAN DURING GLOBALIZATION

Directory of Open Access Journals (Sweden)

Feruza Khayrullaevna Sidikova

2014-10-01

Full Text Available The main purpose of the article is investigation of the issues of development of information services and products in Uzbekistan during globalization role of information and communicative technologies in development international business and trade. As the results of the research there revealed a connection of introducing electronic commerce and business in practice of firms, corporation and banks there conducted changes in the character of carrying out commercial and financial transactions, interrelations with partners and clients, elaborations and introduction business strategies and competition itself. In the conclusion there offered the suggestions of joining and adjusting to each other varying legislation of different countries and developing international system of taxation of Internet commerce satisfying all participants of electronic trading transactions.

On information and communication technology and production cost in construction industry: evidence from the Netherlands

NARCIS (Netherlands)

van der Vlist, A.J; Vrolijk, M.H.; Dewulf, Geert P.M.R.

2014-01-01

The interplay between information and communication technology (ICT) and the competitiveness of construction firms is considered. More specifically, the question is whether firms that invest in information and communication technology have a production cost advantage. The economics literature

Steady-State Growth under Inorganic Carbon Limitation Conditions Increases Energy Consumption for Maintenance and Enhances Nitrous Oxide Production in Nitrosomonas europaea.

Science.gov (United States)

Mellbye, Brett L; Giguere, Andrew; Chaplen, Frank; Bottomley, Peter J; Sayavedra-Soto, Luis A

2016-06-01

Nitrosomonas europaea is a chemolithoautotrophic bacterium that oxidizes ammonia (NH3) to obtain energy for growth on carbon dioxide (CO2) and can also produce nitrous oxide (N2O), a greenhouse gas. We interrogated the growth, physiological, and transcriptome responses of N. europaea to conditions of replete (>5.2 mM) and limited inorganic carbon (IC) provided by either 1.0 mM or 0.2 mM sodium carbonate (Na2CO3) supplemented with atmospheric CO2 IC-limited cultures oxidized 25 to 58% of available NH3 to nitrite, depending on the dilution rate and Na2CO3 concentration. IC limitation resulted in a 2.3-fold increase in cellular maintenance energy requirements compared to those for NH3-limited cultures. Rates of N2O production increased 2.5- and 6.3-fold under the two IC-limited conditions, increasing the percentage of oxidized NH3-N that was transformed to N2O-N from 0.5% (replete) up to 4.4% (0.2 mM Na2CO3). Transcriptome analysis showed differential expression (P ≤ 0.05) of 488 genes (20% of inventory) between replete and IC-limited conditions, but few differences were detected between the two IC-limiting treatments. IC-limited conditions resulted in a decreased expression of ammonium/ammonia transporter and ammonia monooxygenase subunits and increased the expression of genes involved in C1 metabolism, including the genes for RuBisCO (cbb gene cluster), carbonic anhydrase, folate-linked metabolism of C1 moieties, and putative C salvage due to oxygenase activity of RuBisCO. Increased expression of nitrite reductase (gene cluster NE0924 to NE0927) correlated with increased production of N2O. Together, these data suggest that N. europaea adapts physiologically during IC-limited steady-state growth, which leads to the uncoupling of NH3 oxidation from growth and increased N2O production. Nitrification, the aerobic oxidation of ammonia to nitrate via nitrite, is an important process in the global nitrogen cycle. This process is generally dependent on ammonia

Cocoa butter-like lipid production ability of non-oleaginous and oleaginous yeasts under nitrogen-limited culture conditions.

Science.gov (United States)

Wei, Yongjun; Siewers, Verena; Nielsen, Jens

2017-05-01

Cocoa butter (CB) extracted from cocoa beans is the main raw material for chocolate production. However, growing chocolate demands and limited CB production has resulted in a shortage of CB supply. CB is mainly composed of three different kinds of triacylglycerols (TAGs), POP (C16:0-C18:1-C16:0), POS (C16:0-C18:1-C18:0), and SOS (C18:0-C18:1-C18:0). The storage lipids of yeasts, mainly TAGs, also contain relative high-level of C16 and C18 fatty acids and might be used as CB-like lipids (CBL). In this study, we cultivated six different yeasts, including one non-oleaginous yeast strain, Saccharomyces cerevisiae CEN.PK113-7D, and five oleaginous yeast strains, Trichosporon oleaginosus DSM11815, Rhodotorula graminis DSM 27356, Lipomyces starkeyi DSM 70296, Rhodosporidium toruloides DSM 70398, and Yarrowia lipolytica CBS 6124, in nitrogen-limited medium and compared their CBL production ability. Under the same growth conditions, we found that TAGs were the main lipids in all six yeasts and that T. oleaginosus can produce more TAGs than the other five yeasts. Less than 3% of the total TAGs were identified as potential SOS in the six yeasts. However, T. oleaginosus produced 27.8% potential POP and POS at levels of 378 mg TAGs/g dry cell weight, hinting that this yeast may have potential as a CBL production host after further metabolic engineering in future.

Limitations of Online Information on Abdominal Aortic Aneurysm

Directory of Open Access Journals (Sweden)

Carolyn G. Goldberg

2010-01-01

Full Text Available Background. Patients with AAA face a complex decision, and knowledge of the risks and benefits of each treatment option is essential to informed decision-making. Here we assess the current information on the internet accessible to patients regarding the management of AAA. Study Design. We performed a search on Google using the keywords “abdominal aortic aneurysm” and reviewed the top 50 web sites. We focused on information related to treatment options and alternatives to treatment and the risks of each option. Results. Twenty-seven websites were included in the study. Nearly 30% of websites discussed the risk of mortality and myocardial infarction after open surgery, compared to only 7.4% for both risks after EVAR. Other complications were listed by fewer websites. Fifty-five percent of websites reported that patients had a faster recovery following EVAR, but only 18.5% mentioned the risk of reintervention after EVAR or the need for long-term surveillance with CT scans. Conclusions. While most websites included descriptive information on AAA and mentioned the potential treatment options available to patients, the discussion of the risks of open surgery and EVAR was inadequate. These results suggest that websites frequently accessed by patients lack important information regarding surgical risk.

Information system of quality assessment for liquid and gaseous medium production

Science.gov (United States)

Bobrov, V. N.; Us, N. A.; Davidov, I. S.

2018-05-01

A method and a technical solution for controlling the quality of production of liquid and gaseous media is proposed. It is also proposed to monitor harmful factors in production while ensuring safe working conditions. Initially, using the mathematical model of an ideal atmosphere, the projection to the horizontal surface of the observation trajectory is calculated. At the second stage, the horizontal projection of the observation trajectory in real conditions is measured. The quality of the medium is judged by the difference between the projections of observation trajectories. The technical result is presented in the form of a device allowing obtaining information about the quality of the medium under investigation.

The role of value-informed pricing in market-oriented product innovation management

NARCIS (Netherlands)

Ingenbleek, P.; Frambach, R.T.; Verhallen, T.M.M.

2010-01-01

Although the positive effect of a market orientation on new product success is widely accepted and the market orientation literature has increased its understanding of how a market orientation leads to performance, the extant literature has overlooked the role of value-informed pricing in the

The Role of Value-Informed Pricing in Market-Oriented Product Innovation Management

NARCIS (Netherlands)

Ingenbleek, P.T.M.; Frambach, R.T.; Verhallen, Th.M.M.

2010-01-01

Although the positive effect of a market orientation on new product success is widely accepted and the market orientation literature has increased its understanding of how a market orientation leads to performance, the extant literature has overlooked the role of value-informed pricing in the

Promoting Student Learning and Productive Persistence in Developmental Mathematics: Research Frameworks Informing the Carnegie Pathways

Science.gov (United States)

Edwards, Ann R.; Beattie, Rachel L.

2016-01-01

This paper focuses on two research-based frameworks that inform the design of instruction and promote student success in accelerated, developmental mathematics pathways. These are Learning Opportunities--productive struggle on challenging and relevant tasks, deliberate practice, and explicit connections, and Productive Persistence--promoting…

Limits to biofuels

Directory of Open Access Journals (Sweden)

Johansson S.

2013-06-01

Full Text Available Biofuel production is dependent upon agriculture and forestry systems, and the expectations of future biofuel potential are high. A study of the global food production and biofuel production from edible crops implies that biofuel produced from edible parts of crops lead to a global deficit of food. This is rather well known, which is why there is a strong urge to develop biofuel systems that make use of residues or products from forest to eliminate competition with food production. However, biofuel from agro-residues still depend upon the crop production system, and there are many parameters to deal with in order to investigate the sustainability of biofuel production. There is a theoretical limit to how much biofuel can be achieved globally from agro-residues and this amounts to approximately one third of todays’ use of fossil fuels in the transport sector. In reality this theoretical potential may be eliminated by the energy use in the biomass-conversion technologies and production systems, depending on what type of assessment method is used. By surveying existing studies on biofuel conversion the theoretical limit of biofuels from 2010 years’ agricultural production was found to be either non-existent due to energy consumption in the conversion process, or up to 2–6000TWh (biogas from residues and waste and ethanol from woody biomass in the more optimistic cases.

Limits to biofuels

Science.gov (United States)

Johansson, S.

2013-06-01

Biofuel production is dependent upon agriculture and forestry systems, and the expectations of future biofuel potential are high. A study of the global food production and biofuel production from edible crops implies that biofuel produced from edible parts of crops lead to a global deficit of food. This is rather well known, which is why there is a strong urge to develop biofuel systems that make use of residues or products from forest to eliminate competition with food production. However, biofuel from agro-residues still depend upon the crop production system, and there are many parameters to deal with in order to investigate the sustainability of biofuel production. There is a theoretical limit to how much biofuel can be achieved globally from agro-residues and this amounts to approximately one third of todays' use of fossil fuels in the transport sector. In reality this theoretical potential may be eliminated by the energy use in the biomass-conversion technologies and production systems, depending on what type of assessment method is used. By surveying existing studies on biofuel conversion the theoretical limit of biofuels from 2010 years' agricultural production was found to be either non-existent due to energy consumption in the conversion process, or up to 2-6000TWh (biogas from residues and waste and ethanol from woody biomass) in the more optimistic cases.

Pesticide Product Information System (PPIS)

Science.gov (United States)

PPIS includes registrant name and address, chemical ingredients, toxicity category, product names, distributor brand names, site/pest uses, pesticidal type, formulation code, and registration status for all products registered in the U.S.

Consumer information or direct product experience? Alternative information policies and their effects on consumer acceptance of GM foods

DEFF Research Database (Denmark)

Scholderer, Joachim

an informed purchase decision. Unfortunately, things are not that simple. Previous research has shown that Europeans already hold firm negative attitudes to GM foods. These attitudes are not based on risk-benefit evaluations of particular products. Rather, they seem to be a function of consumers? general......) consumers can be given the opportunity to evaluate GM products on the basis of direct experience, i.e. after the products have been launched. The first approach represents the transparency/precaution policy that was actually adopted in Europe, whilst the second one was dismissed after confrontations arose...... between different stakeholder groups in connection with Nestle's "Butterfinger" launch in 1998. Both approaches would have to compete against a strong network of pre-existing consumer attitudes, but surprisingly, neither of them has ever been experimentally tested on a broad scale. Two experiments...

Structural limitations of learning in a crowd: communication vulnerability and information diffusion in MOOCs

Science.gov (United States)

Gillani, Nabeel; Yasseri, Taha; Eynon, Rebecca; Hjorth, Isis

2014-09-01

Massive Open Online Courses (MOOCs) bring together a global crowd of thousands of learners for several weeks or months. In theory, the openness and scale of MOOCs can promote iterative dialogue that facilitates group cognition and knowledge construction. Using data from two successive instances of a popular business strategy MOOC, we filter observed communication patterns to arrive at the ``significant'' interaction networks between learners and use complex network analysis to explore the vulnerability and information diffusion potential of the discussion forums. We find that different discussion topics and pedagogical practices promote varying levels of 1) ``significant'' peer-to-peer engagement, 2) participant inclusiveness in dialogue, and ultimately, 3) modularity, which impacts information diffusion to prevent a truly ``global'' exchange of knowledge and learning. These results indicate the structural limitations of large-scale crowd-based learning and highlight the different ways that learners in MOOCs leverage, and learn within, social contexts. We conclude by exploring how these insights may inspire new developments in online education.

Integration of microalgae cultivation with industrial waste remediation for biofuel and bioenergy production: opportunities and limitations.

Science.gov (United States)

McGinn, Patrick J; Dickinson, Kathryn E; Bhatti, Shabana; Frigon, Jean-Claude; Guiot, Serge R; O'Leary, Stephen J B

2011-09-01

There is currently a renewed interest in developing microalgae as a source of renewable energy and fuel. Microalgae hold great potential as a source of biomass for the production of energy and fungible liquid transportation fuels. However, the technologies required for large-scale cultivation, processing, and conversion of microalgal biomass to energy products are underdeveloped. Microalgae offer several advantages over traditional 'first-generation' biofuels crops like corn: these include superior biomass productivity, the ability to grow on poor-quality land unsuitable for agriculture, and the potential for sustainable growth by extracting macro- and micronutrients from wastewater and industrial flue-stack emissions. Integrating microalgal cultivation with municipal wastewater treatment and industrial CO(2) emissions from coal-fired power plants is a potential strategy to produce large quantities of biomass, and represents an opportunity to develop, test, and optimize the necessary technologies to make microalgal biofuels more cost-effective and efficient. However, many constraints on the eventual deployment of this technology must be taken into consideration and mitigating strategies developed before large scale microalgal cultivation can become a reality. As a strategy for CO(2) biomitigation from industrial point source emitters, microalgal cultivation can be limited by the availability of land, light, and other nutrients like N and P. Effective removal of N and P from municipal wastewater is limited by the processing capacity of available microalgal cultivation systems. Strategies to mitigate against the constraints are discussed.

A chain information model for structured knowledge management: Towards effective and efficient food product improvement

NARCIS (Netherlands)

Benner, M.; Geerts, R.F.R.; Linnemann, A.R.; Jongen, W.M.F.; Folstar, P.; Cnossen, H.J.

2003-01-01

New food products often fail, because they are not designed according to consumers' wishes or not produced efficiently. Frequently, the information required for an effective and efficient product development process is not relayed to the appropriate actor in the chain. This article presents a

A chain information model for structured knowledge management: towards effective and efficient food product improvement

NARCIS (Netherlands)

Benner, M.; Geerts, R.F.R.; Linnemann, A.R.; Jongen, W.M.F.; Folstar, P.; Cnossen, H.J.

2003-01-01

New food products often fail, because they are not designed according to consumers' wishes or not produced efficiently. Frequently, the information required for an effective and efficient product development process is not relayed to the appropriate actor in the chain. This article presents a

A Productivity Analysis of Adopting Information Technology for the Treatment of Autism, with Case Studies

Science.gov (United States)

Dao, Philip

2016-01-01

The adoption of information technology might improve the productivity of autism treatment centers. Productivity improvement might resolve the problem of the insufficient supply of autism treatment service. The problem caused tremendous financial burdens to private individuals and public healthcare systems. The researcher explored the relationships…

Nutritional supplement products: Does the label information influence purchasing decisions for the physically active?

Science.gov (United States)

Gabriels, Gary; Lambert, Mike

2013-10-02

The increase in sales of nutritional supplement globally can be attributed, in part, to aggressive marketing by manufacturers, rather than because the nutritional supplements have become more effective. Furthermore, the accuracy of the labelling often goes unchallenged. Therefore, any effects of the supplement, may be due to contaminants or adulterants in these products not reflected on the label. A self-administered questionnaire was used to determine how consumers of nutritional supplements acquired information to assist their decision-making processes, when purchasing a product. The study was approved by the University of Cape Town, Faculty of Health Sciences Human Research Ethics Committee. The questionnaire consisted of seven, closed and open-ended questions. The participants were asked to respond to the questions according to a defined list of statements. A total of 259 participants completed and returned questionnaires. The data and processing of the returned questionnaires was captured using Windows-based Microsoft® Office Excel 2003 SP 1 (Excel © 1985-2003 Microsoft Corporation). Statistica Version 10 (copyright © Stat Soft, Inc. 1984-2011) was used to calculate the descriptive statistics. The main finding of the study was that nearly 70% of the respondents who purchased supplements were strongly influenced by container label information that stipulated that the nutritional supplement product is free of banned substances. The second finding was that just over 50% of the respondents attached importance to the quality of the nutritional supplement product information on the container label. The third finding was that about 40% of the respondents were strongly influenced by the ingredients on the labels when they purchased nutritional supplements. This study, (i) identifies short-comings in current labelling information practices, (ii) provides opportunities to improve label and non-label information and communication, and, (iii) presents the case for

The Benefits and Limitations of Crowdsourced Information for Rapid Damage Assessment of Global Earthquakes

Science.gov (United States)

Bossu, R.; Landès, M.; Roussel, F.

2017-12-01

The Internet has fastened the collection of felt reports and macroseismic data after global earthquakes. At the European-Mediterranean Seismological Centre (EMSC), where the traditional online questionnaires have been replace by thumbnail-based questionnaires, an average of half of the reports are collected within 10 minutes of an earthquake's occurrence. In regions where EMSC is well identified this goes down to 5 min. The user simply specifies the thumbnail corresponding to observed effects erasing languages barriers and improving collection via small smartphone screens. A previous study has shown that EMSC data is well correlated with "Did You Feel It" (DYFI) data and 3 independent, manually collected datasets. The efficiency and rapidity of felt report collection through thumbnail-based questionnaires does not necessarily mean that they offer a complete picture of the situation for all intensities values, especially the higher ones. There are several potential limitations. Demographics probably play a role but so might eyewitnesses' behaviors: it is probably not their priority to report when their own safety and that of their loved ones is at stake. We propose to test this hypothesis on EMSC felt reports and to extend the study to LastQuake smartphone application uses. LastQuake is a free smartphone app providing very rapid information on felt earthquakes. There are currently 210 000 active users around the world covering almost every country except for a few ones in Sub-Saharan Africa. Along with felt reports we also analyze the characteristics of LastQuake app launches. For both composite datasets created from 108 earthquakes, we analyze the rapidity of eyewitnesses' reaction and how it changes with intensity values and surmise how they reflect different types of behaviors. We will show the intrinsic limitations of crowdsourced information for rapid situation awareness. More importantly, we will show in which cases the lack of crowdsourced information could

Quantum-Limited Directional Amplifiers with Optomechanics

Science.gov (United States)

Malz, Daniel; Tóth, László D.; Bernier, Nathan R.; Feofanov, Alexey K.; Kippenberg, Tobias J.; Nunnenkamp, Andreas

2018-01-01

Directional amplifiers are an important resource in quantum-information processing, as they protect sensitive quantum systems from excess noise. Here, we propose an implementation of phase-preserving and phase-sensitive directional amplifiers for microwave signals in an electromechanical setup comprising two microwave cavities and two mechanical resonators. We show that both can reach their respective quantum limits on added noise. In the reverse direction, they emit thermal noise stemming from the mechanical resonators; we discuss how this noise can be suppressed, a crucial aspect for technological applications. The isolation bandwidth in both is of the order of the mechanical linewidth divided by the amplitude gain. We derive the bandwidth and gain-bandwidth product for both and find that the phase-sensitive amplifier has an unlimited gain-bandwidth product. Our study represents an important step toward flexible, on-chip integrated nonreciprocal amplifiers of microwave signals.

78 FR 34393 - Electronic Submission of Tobacco Product Applications and Other Information; Public Workshop...

Science.gov (United States)

2013-06-07

.... Contact Person: Karen M. Templeton-Somers, Office of Science, Center for Tobacco Products, Food and Drug... stakeholders and interested parties, including, but not limited to, large and small pharmaceutical..., large and small pharmaceutical manufacturers with experience in electronic submissions; vendors of...

How To Compete: The Impact Of Workplace Practices And Information Technology On Productivity

OpenAIRE

Sandra E. Black; Lisa M. Lynch

2001-01-01

Using data from a unique nationally representative sample of businesses, the Educational Quality of the Workforce National Employers Survey (EQW-NES), matched with the Bureau of the Census'' Longitudinal Research Database (LRD), we examine the impact of workplace practices, information technology and human capital investments on productivity. We estimate an augmented Cobb Douglas production function with both cross section and panel data covering the period of 1987 1993 using both within and ...

The limited contribution of large trees to annual biomass production in an old-growth tropical forest.

Science.gov (United States)

Ligot, Gauthier; Gourlet-Fleury, Sylvie; Ouédraogo, Dakis-Yaoba; Morin, Xavier; Bauwens, Sébastien; Baya, Fidele; Brostaux, Yves; Doucet, Jean-Louis; Fayolle, Adeline

2018-04-16

Although the importance of large trees regarding biodiversity and carbon stock in old-growth forests is undeniable, their annual contribution to biomass production and carbon uptake remains poorly studied at the stand level. To clarify the role of large trees in biomass production, we used data of tree growth, mortality, and recruitment monitored during 20 yr in 10 4-ha plots in a species-rich tropical forest (Central African Republic). Using a random block design, three different silvicultural treatments, control, logged, and logged + thinned, were applied in the 10 plots. Annual biomass gains and losses were analyzed in relation to the relative biomass abundance of large trees and by tree size classes using a spatial bootstrap procedure. Although large trees had high individual growth rates and constituted a substantial amount of biomass, stand-level biomass production decreased with the abundance of large trees in all treatments and plots. The contribution of large trees to annual stand-level biomass production appeared limited in comparison to that of small trees. This pattern did not only originate from differences in abundance of small vs. large trees or differences in initial biomass stocks among tree size classes, but also from a reduced relative growth rate of large trees and a relatively constant mortality rate among tree size classes. In a context in which large trees are increasingly gaining attention as being a valuable and a key structural characteristic of natural forests, the present study brought key insights to better gauge the relatively limited role of large trees in annual stand-level biomass production. In terms of carbon uptake, these results suggest, as already demonstrated, a low net carbon uptake of old-growth forests in comparison to that of logged forests. Tropical forests that reach a successional stage with relatively high density of large trees progressively cease to be carbon sinks as large trees contribute sparsely or even

Procedure for the design of Information Management Systems in Production Cooperatives

Directory of Open Access Journals (Sweden)

Maidelyn Díaz Pérez

2018-02-01

Full Text Available The information management systems of the entrepreneurial organizations have been conceived that the fulfillment of the strategic objectives depend to a large extent on the good performance of several informative tasks such as obtaining information from the environment, identifying and representing the information flows of the processes , the structuring of operational and functional data, the internal management of knowledge, etc. But in turn, the achievement of these actions depends on there being a group of procedures that lead to the adequate standardization of the data. In spite of the fact that these procedures are essential for the proper functioning of any system, and that, for the most part, the quality, reliability and pertinence of the information that is managed depends on them, it is not usual for them to exist in cooperative organizations. even in most cases they are not written. The objective of this research is to establish a procedure to design an information management system for research in a production cooperative linked directly to research. The result obtained allows identifying, defining and structuring the data required by the system to operate efficiently, as well as articulate the different components that should integrate it in its systemic development. This procedure facilitates the efficient management of operative, functional and strategic information of the different processes of a cooperative in correspondence with its strategic objectives.

The role of product information on consumer sensory evaluation, expectations, experiences and emotions of cricket-flour-containing buns.

Science.gov (United States)

Pambo, Kennedy O; Okello, Julius J; Mbeche, Robert M; Kinyuru, John N; Alemu, Mohammed H

2018-04-01

Studies suggest that consumer' acceptance of edible insects can be enhanced by processing and blending them with familiar food products. This is however, expected to result in changes in some sensory attributes. In this study, we investigated how consumers evaluate the appropriateness of sensory attributes of a common bakery product (buns) that was blended with cricket-flour i.e., cricket-flour-containing (CFC) buns. We also tested whether provision of information can modulate the sensory evaluations, personal involvement and emotions. The study is based on a field experiment involving 432 participants drawn from rural communities in Kenya. Participants were randomly assigned to 3 information treatment groups: i) Control group - received only general information, ii) Treatment 1 - received general information and information about the benefits (i.e., positive attributes), iii) Treatment 2 - received general information and information about the potential drawbacks (i.e., negative attributes). Participants evaluated the CFC buns before and after tasting using Just-About-Right (JAR) scale. Results indicate that providing product information affected sensory evaluation of the product's sensory attributes. They also indicate that actual tasting of the CFC buns improved the convergence of sensory evaluation of the attributes towards the ideal level. Results further show that CFC buns elicited more positive feelings with little differences in the emotional profiles between the information treatments, which suggests general interest in the buns. These results provide useful insights on how to enhance consumer acceptance of insect-based foods. We discuss the implications of the findings. Copyright © 2018 Elsevier Ltd. All rights reserved.

Information delivery manuals to integrate building product information into design

DEFF Research Database (Denmark)

Berard, Ole Bengt; Karlshøj, Jan

2013-01-01

Despite continuing BIM progress, professionals in the AEC industry often lack the information they need to perform their work. Although this problem could be alleviated by information systems similar to those in other industries, companies struggle to model processes and information needs....... Traditional business process modeling languages often fail to completely cover all four perspectives. BuildingSMART has proposed Information Delivery Manuals (IDMs) to model and re-engineer processes that address the four perspectives through a collaborative methodology in order to standardize and implement...... in the manner necessary to develop information systems that support digital collaboration, workflows, and information exchange. Processes for information systems can be described from four perspectives: task sequence, information need, organizational interaction, and required logic for the specific task...

Student and faculty perspective toward the role and value of integration of natural product information into the pharmacy curriculum.

Science.gov (United States)

Kostka-Rokosz, Maria D; Dvorkin-Camiel, Lana; Asabigi, Amina-Louise

2011-03-01

Consumer use of natural products is a mainstay in our society and continues to grow in prevalence. As pharmacists are viewed as drug experts and are easily accessible to patients, it is important for them to have basic knowledge of natural products. Students and faculty members participating in a natural product elective were surveyed upon completion of the course about their perspectives regarding incorporation of covered information into the required curriculum. The majority of students and faculty members agree with the necessity of natural product content in the pharmacy curriculum. Their ideas for ways of incorporating this information, however, differ. Healthcare students and faculty are beginning to recognize the need for incorporation of Natural Product information into the curriculum and healthcare programs in the country should begin to rise to the occasion.

Limitations and information needs for engineered nanomaterial-specific exposure estimation and scenarios: recommendations for improved reporting practices

Science.gov (United States)

Clark, Katherine; van Tongeren, Martie; Christensen, Frans M.; Brouwer, Derk; Nowack, Bernd; Gottschalk, Fadri; Micheletti, Christian; Schmid, Kaspar; Gerritsen, Rianda; Aitken, Rob; Vaquero, Celina; Gkanis, Vasileios; Housiadas, Christos; de Ipiña, Jesús María López; Riediker, Michael

2012-09-01

The aim of this paper is to describe the process and challenges in building exposure scenarios for engineered nanomaterials (ENM), using an exposure scenario format similar to that used for the European Chemicals regulation (REACH). Over 60 exposure scenarios were developed based on information from publicly available sources (literature, books, and reports), publicly available exposure estimation models, occupational sampling campaign data from partnering institutions, and industrial partners regarding their own facilities. The primary focus was on carbon-based nanomaterials, nano-silver (nano-Ag) and nano-titanium dioxide (nano-TiO2), and included occupational and consumer uses of these materials with consideration of the associated environmental release. The process of building exposure scenarios illustrated the availability and limitations of existing information and exposure assessment tools for characterizing exposure to ENM, particularly as it relates to risk assessment. This article describes the gaps in the information reviewed, recommends future areas of ENM exposure research, and proposes types of information that should, at a minimum, be included when reporting the results of such research, so that the information is useful in a wider context.

Limitations and information needs for engineered nanomaterial-specific exposure estimation and scenarios: recommendations for improved reporting practices

Energy Technology Data Exchange (ETDEWEB)

Clark, Katherine, E-mail: katherine.clark@lkc-ltd.com [LKC (Switzerland); Tongeren, Martie van, E-mail: martie.vantongeren@iom-world.org [Institute of Occupational Medicine (IOM) (United Kingdom); Christensen, Frans M., E-mail: fmch@cowi.dk [COWI (Denmark); Brouwer, Derk, E-mail: dick.brouwer@tno.nl [TNO (Netherlands); Nowack, Bernd, E-mail: nowack@empa.ch; Gottschalk, Fadri, E-mail: Fadri.Gottschalk@empa.ch [EMPA-Swiss Federal Laboratories for Materials Science and Technology (Switzerland); Micheletti, Christian, E-mail: Christian.micheletti@gmail.com [Veneto NanoTech S.C.p.A (Italy); Schmid, Kaspar, E-mail: kasparschmid@alumni.ethz.ch [Institute of Occupational Medicine (IOM) (United Kingdom); Gerritsen, Rianda, E-mail: rianda.gerritsen@tno.nl [TNO (Netherlands); Aitken, Rob, E-mail: rob.aitken@iom-world.org [Institute of Occupational Medicine (IOM) (United Kingdom); Vaquero, Celina, E-mail: celina.vaquero@tecnalia.com [TECNALIA Research and Innovation (Spain); Gkanis, Vasileios, E-mail: v_gkanis@hotmail.com; Housiadas, Christos, E-mail: christos@ipta.demokritos.gr [National Center for Scientific Research ' Demokritos' (Greece); Ipina, Jesus Maria Lopez de, E-mail: jesus.lopezdeipina@tecnalia.com [TECNALIA Research and Innovation (Spain); Riediker, Michael, E-mail: michael.riediker@hospvd.ch [Institute for Work and Health (IST) (Switzerland)

2012-09-15

The aim of this paper is to describe the process and challenges in building exposure scenarios for engineered nanomaterials (ENM), using an exposure scenario format similar to that used for the European Chemicals regulation (REACH). Over 60 exposure scenarios were developed based on information from publicly available sources (literature, books, and reports), publicly available exposure estimation models, occupational sampling campaign data from partnering institutions, and industrial partners regarding their own facilities. The primary focus was on carbon-based nanomaterials, nano-silver (nano-Ag) and nano-titanium dioxide (nano-TiO{sub 2}), and included occupational and consumer uses of these materials with consideration of the associated environmental release. The process of building exposure scenarios illustrated the availability and limitations of existing information and exposure assessment tools for characterizing exposure to ENM, particularly as it relates to risk assessment. This article describes the gaps in the information reviewed, recommends future areas of ENM exposure research, and proposes types of information that should, at a minimum, be included when reporting the results of such research, so that the information is useful in a wider context.

Migration to the GLUE 2.0 information schema in the LCG/EGEE/EGI production Grid

International Nuclear Information System (INIS)

Burke, Stephen; Field, Laurence; Horat, David

2011-01-01

The GLUE information schema has been in use in the LCG/EGEE production Grid since the first version was released in 2002. In 2008 a major redesign of GLUE, version 2.0, was defined in the context of the Open Grid Forum. The implementation of the publication and use of the new schema is a complex process which needs to be carefully managed to avoid any disruption to the production service, especially in the light of the end of the EGEE project and the transition to the new middleware and operational structures in EGI. In this paper we discuss the LDAP rendering of the schema, the upgrading of the Grid information system to allow both schemas to be used in parallel, the design and rollout of information providers, and the plans for migrating client software which uses the schema information. In particular we consider the implications for the specific requirements of the LCG project, especially regarding storage systems, accounting and monitoring.

Limits on the production of direct photons in 200 A GeV$^{32}$S + Au collisions

CERN Document Server

Albrecht, R; Awes, T C; Barlag, C; Berger, F; Bloomer, M A; Blume, C; Bock, D L; Böck, R K; Bohne, E M; Bucher, D; Claesson, G; Claussen, A; Clewing, G; Debbe, R; Dragon, L; Dubovik, Yu; Eklund, A; Fokin, S L; Franz, A; Garpman, S I A; Glasow, R; Gustafsson, Hans Åke; Gutbrod, H H; Hansen, O; Hölker, G; Idh, J; Ippolitov, M S; Jacobs, P; Kampert, K H; Karadzhev, K; Kolb, B W; Lebedev, A; Löhner, H; Lund, I; Man'ko, V I; Moskowitz, B E; Nikolaev, S; Nystrand, J; Obenshain, F E; Oskarsson, A; Otterlund, I; Peitzmann, Thomas; Plasil, F; Poskanzer, A M; Purschke, M L; Ritter, H G; Roters, B; Saini, S; Santo, R; Schlagheck, H; Schmidt, H R; Söderström, K; Sørensen, S P; Stankus, P; Steffens, K; Steinhäuser, P; Stenlund, E; Stüken, D; Vinogradov, A; Wegner, H; Young, G R

1996-01-01

A search for the production of direct photons in S+Au collisions at 200\\cdotA~GeV has been carried out in the CERN-WA80 experiment. For central collisions the measured photon excess at each p_T, averaged over the range 0.5~GeV/c~ \\leq p_T \\leq 2.5~GeV/c, corresponded to 5.0\\% of the total inclusive photon yield with a statistical error of \\sigma_{\\rm stat}=0.8\\% and a systematic error of \\sigma_{\\rm syst}=5.8\\%. Upper limits on the invariant yield for direct photon production at the 90\\%~C.L. are presented. Possible implications for the dynamics of high-energy heavy-ion collisions are discussed.

Random amino acid mutations and protein misfolding lead to Shannon limit in sequence-structure communication.

Directory of Open Access Journals (Sweden)

Andreas Martin Lisewski

2008-09-01

Full Text Available The transmission of genomic information from coding sequence to protein structure during protein synthesis is subject to stochastic errors. To analyze transmission limits in the presence of spurious errors, Shannon's noisy channel theorem is applied to a communication channel between amino acid sequences and their structures established from a large-scale statistical analysis of protein atomic coordinates. While Shannon's theorem confirms that in close to native conformations information is transmitted with limited error probability, additional random errors in sequence (amino acid substitutions and in structure (structural defects trigger a decrease in communication capacity toward a Shannon limit at 0.010 bits per amino acid symbol at which communication breaks down. In several controls, simulated error rates above a critical threshold and models of unfolded structures always produce capacities below this limiting value. Thus an essential biological system can be realistically modeled as a digital communication channel that is (a sensitive to random errors and (b restricted by a Shannon error limit. This forms a novel basis for predictions consistent with observed rates of defective ribosomal products during protein synthesis, and with the estimated excess of mutual information in protein contact potentials.

Information support of decision-making in the early stages of new product development when approaching marketing management

Directory of Open Access Journals (Sweden)

A. A. Tishhenko

2017-01-01

Full Text Available Goal. To create theoretical and practical approaches to information support of the decision making procedure at the initial stages of developing a new product with a marketing management approach that allows to improve the quality of management decisions on the product. Material and methods. The projected software package on the basis of expert assessments and fuzzy sets, allows to automate the decision to implement innovation at an early stage. The work used such scientific methods as generalization of scientific literature in the field of shaping and taking into account the features of innovation, Solutions in the initial stages of development, methods of expert evaluation and elements of fuzzy sets. Results and its discussion. The article presents the rationale and possibilities for informational support of the decision-making procedure for innovative products. The authors also proposed a methodology for making a decision when developing a new product based on expert and predictive assessments of innovation at the initial stages of its creation. A software package has been developed that automates the decision to manufacture a new product at the initial stages of production. Conclusion. Despite a large number of theoretical developments in innovative management, the risk associated with the release of new products remains quite high. The developed methodology of information support for decision-making at the initial stages of the development of a new product will reduce the risk of the lack of demand for innovation.

LIPID PRODUCTION BY DUNALIELLA SALINA IN BATCH CULTURE: EFFECTS OF NITROGEN LIMITATION AND LIGHT INTENSITY

Energy Technology Data Exchange (ETDEWEB)

Weldy, C.S.; Huesemann, M.

2007-01-01

Atmospheric carbon dioxide (CO2) concentrations are increasing and may cause unknown deleterious environmental effects if left unchecked. The Intergovernmental Panel on Climate Change (IPCC) has predicted in its latest report a 2°C to 4°C increase in global temperatures even with the strictest CO2 mitigation practices. Global warming can be attributed in large part to the burning of carbon-based fossil fuels, as the concentration of atmospheric CO2 is directly related to the burning of fossil fuels. Biofuels which do not add CO2 to the atmosphere are presently generated primarily from terrestrial plants, i.e., ethanol from corn grain and biodiesel from soybean oil. The production of biofuels from terrestrial plants is severely limited by the availability of fertile land. Lipid production from microalgae and its corresponding biodiesel production have been studied since the late 1970s but large scale production has remained economically infeasible due to the large costs of sterile growing conditions required for many algal species. This study focuses on the potential of the halophilic microalgae species Dunaliella salina as a source of lipids and subsequent biodiesel production. The lipid production rates under high light and low light as well as nitrogen suffi cient and nitrogen defi cient culture conditions were compared for D. salina cultured in replicate photobioreactors. The results show (a) cellular lipid content ranging from 16 to 44% (wt), (b) a maximum culture lipid concentration of 450mg lipid/L, and (c) a maximum integrated lipid production rate of 46mg lipid/L culture*day. The high amount of lipids produced suggests that D. salina, which can be mass-cultured in non-sterile outdoor ponds, has strong potential to be an economically valuable source for renewable oil and biodiesel production.

Spatiotemporal noise covariance estimation from limited empirical magnetoencephalographic data

International Nuclear Information System (INIS)

Jun, Sung C; Plis, Sergey M; Ranken, Doug M; Schmidt, David M

2006-01-01

The performance of parametric magnetoencephalography (MEG) and electroencephalography (EEG) source localization approaches can be degraded by the use of poor background noise covariance estimates. In general, estimation of the noise covariance for spatiotemporal analysis is difficult mainly due to the limited noise information available. Furthermore, its estimation requires a large amount of storage and a one-time but very large (and sometimes intractable) calculation or its inverse. To overcome these difficulties, noise covariance models consisting of one pair or a sum of multi-pairs of Kronecker products of spatial covariance and temporal covariance have been proposed. However, these approaches cannot be applied when the noise information is very limited, i.e., the amount of noise information is less than the degrees of freedom of the noise covariance models. A common example of this is when only averaged noise data are available for a limited prestimulus region (typically at most a few hundred milliseconds duration). For such cases, a diagonal spatiotemporal noise covariance model consisting of sensor variances with no spatial or temporal correlation has been the common choice for spatiotemporal analysis. In this work, we propose a different noise covariance model which consists of diagonal spatial noise covariance and Toeplitz temporal noise covariance. It can easily be estimated from limited noise information, and no time-consuming optimization and data-processing are required. Thus, it can be used as an alternative choice when one-pair or multi-pair noise covariance models cannot be estimated due to lack of noise information. To verify its capability we used Bayesian inference dipole analysis and a number of simulated and empirical datasets. We compared this covariance model with other existing covariance models such as conventional diagonal covariance, one-pair and multi-pair noise covariance models, when noise information is sufficient to estimate them. We

40 CFR 414.101 - Toxic pollutant effluent limitations and standards for direct discharge point sources that do not...

Science.gov (United States)