WorldWideScience

Sample records for production guild filmstrip

  1. Herbivore effects on productivity vary by guild: cattle increase mean productivity while wildlife reduce variability.

    Science.gov (United States)

    Charles, Grace K; Porensky, Lauren M; Riginos, Corinna; Veblen, Kari E; Young, Truman P

    2017-01-01

    Wild herbivores and livestock share the majority of rangelands worldwide, yet few controlled experiments have addressed their individual, additive, and interactive impacts on ecosystem function. While ungulate herbivores generally reduce standing biomass, their effects on aboveground net primary production (ANPP) can vary by spatial and temporal context, intensity of herbivory, and herbivore identity and species richness. Some evidence indicates that moderate levels of herbivory can stimulate aboveground productivity, but few studies have explicitly tested the relationships among herbivore identity, grazing intensity, and ANPP. We used a long-term exclosure experiment to examine the effects of three groups of wild and domestic ungulate herbivores (megaherbivores, mesoherbivore wildlife, and cattle) on herbaceous productivity in an African savanna. Using both field measurements (productivity cages) and satellite imagery, we measured the effects of different herbivore guilds, separately and in different combinations, on herbaceous productivity across both space and time. Results from both productivity cage measurements and satellite normalized difference vegetation index (NDVI) demonstrated a positive relationship between mean productivity and total ungulate herbivore pressure, driven in particular by the presence of cattle. In contrast, we found that variation in herbaceous productivity across space and time was driven by the presence of wild herbivores (primarily mesoherbivore wildlife), which significantly reduced heterogeneity in ANPP and NDVI across both space and time. Our results indicate that replacing wildlife with cattle (at moderate densities) could lead to similarly productive but more heterogeneous herbaceous plant communities in rangelands. © 2016 by the Ecological Society of America.

  2. A COMPARATIVE STUDY ON THE EFFECTIVENESS OF THE FILMSTRIP, SOUND FILMSTRIP, AND FILMOGRAPH FOR TEACHING FACTS AND CONCEPTS.

    Science.gov (United States)

    FINN, JAMES D.; MCBEATH, RONALD J.

    THIS STUDY COMPARED THE RELATIVE EFFECTIVENESS IN FACTUAL LEARNING OF (1) A CAPTIONED FILMSTRIP, (2) A CAPTIONED FILMSTRIP WITH NARRATION, (3) A SOUND FILMSTRIP, AND (4) A FILMOGRAPH. (THE FILMOGRAPH WAS MADE BY PHOTOGRAPHING STILL PICTURES ON MOTION PICTURE FILM.) THE STUDY TESTED THE HYPOTHESIS THAT THE FILMOGRAPHY COULD TEACH MORE EFFECTIVELY.…

  3. Cry the Beloved Country. A Sound Filmstrip Program. Study Guide.

    Science.gov (United States)

    Peters, John; Peters, Frances

    Based on the novel and motion picture "Cry, the Beloved Country," this filmstrip program is a re-creation of the story of a black minister and a white farmer in South Africa whose lives are bound together in mutual tragedy. The three filmstrips examine the people, problems, laws, and institutions of South Africa and expose the evils of…

  4. Density and distribution of nitrifying guilds in rapid sand filters for drinking water production: Dominance of Nitrospira spp

    DEFF Research Database (Denmark)

    Tatari, Karolina; Musovic, Sanin; Gülay, Arda

    2017-01-01

    distribution of these guilds, filter material was sampled at four drinking water treatment plants (DWTPs) in parallel filters of the pre- and after-filtration stages at different locations and depths. The target guilds were quantified by qPCR targeting 16S rRNA and amoA genes. Total bacterial densities......We investigated the density and distribution of total bacteria, canonical Ammonia Oxidizing Bacteria (AOB) (Nitrosomonas plus Nitrosospira), Ammonia Oxidizing Archaea (AOA), as well as Nitrobacter and Nitrospira in rapid sand filters used for groundwater treatment. To investigate the spatial...

  5. Urbanization Alters the Influence of Weather and an Index of Forest Productivity on Avian Community Richness and Guild Abundance in the Seattle Metropolitan Area

    Directory of Open Access Journals (Sweden)

    Benjamin Shryock

    2017-05-01

    Full Text Available Fluctuations in weather and forest productivity influence the abundance and richness of bird populations, however in a rapidly urbanizing landscape the relative importance of each factor may vary. We assessed this possibility in the Seattle, WA, USA region by correlating 10 years of bird richness and relative abundance of nine guilds indicative of their tolerance of human development, migration, diet and use of human food subsidies with an annual index of forest productivity (vegetation greenness derived from a 250 m resolution Normalized Difference Vegetation Index (NDVI product from the MODIS satellite and weather (variation in the Oceanic Niño Index, which estimates the strength of the El Niño-Southern Oscillation, a major driver of local temperature and precipitation. We found that variation in NDVI exerted a strong influence on the richness of the avian community and the abundance of guilds in landscapes undergoing active development, but was less influential in areas of established housing development or forested reserves. Relative to NDVI, weather was much less influential on the abundance of guilds at actively changing sites, and slightly more influential in forest reserves and established developments. Following the warm winter and during the dry summer associated with a strong El Niño, migrants and herbivores declined in changing landscapes, insectivores declined in established developments, and herbivores declined while synanthropic species increased in reserves. These changes may presage the effects of climate change in the Pacific Northwest, which are expected to be similar to El Niño conditions. To buffer these changes in native bird communities, planners, developers, regulators, and home owners should minimize the loss of vegetation during development and attempt to quickly achieve mature landscaping that preferably provides food and shelter for birds.

  6. Smog and Your Automobile. [Teacher's Manual, Filmstrip, Record].

    Science.gov (United States)

    California State Dept. of Public Health, Berkeley.

    A filmstrip, 33 1/3 RPM record, and teacher's manual are combined in this set to be used in driver education classes at the senior high school level. Their main purpose is to inform future drivers how they can minimize pollution from their automobiles through proper car maintenance and good driving habits. Content of the manual is divided into…

  7. Dekooridiiva Tricia Guild / Piret Veigel

    Index Scriptorium Estoniae

    Veigel, Piret, 1961-

    2004-01-01

    Briti tekstiilikunstniku Tricia Guildi viimasest kollektsioonist, kus vastanduvad suureõielised ja triibulised mustrid, tema poolt avaldatud raamatuid. Tricia Guild juhib sisustuskangaid, tapeete ja mööblit tootvat firmat Designer's Guild. 5 ill

  8. Louis L'Amour's American West. A Sound Filmstrip Program. Study Guide.

    Science.gov (United States)

    Peters, John; Peters, Frances

    Adapted from the motion picture based on two of Louis L'Amour's novels of the American West, "The Daybreakers" and "Sackett," this filmstrip program will help secondary students interpret the meaning of the frontier experience in American history. In the first three filmstrips--"Heading West,""Staking…

  9. Guild Hall retrofit

    Energy Technology Data Exchange (ETDEWEB)

    1984-08-01

    This report demonstrates the economic viability of an exterior rewrap retrofit performed on a public community facility for the performing arts. This facility originally consisted of two mess halls built by the American army. The exterior retrofit consisted of constructing a super-insulated passageway to link the two halls as well as completely wrapping the facility with six millimetre polyethylene to provide an airtight barrier. The roofs and walls were reinsulated and insulation levels were increased to RSI 10.5 in the ceilings and RSI 7.7 in the walls. The installation of a propane fuelled furnace was also included in the retrofit package. Prior to the renovations and retrofitting, the Guild Hall facility was almost unusable. The demonstration project transformed the cold, drafty buildings into an attractive, comfortable and functional centre for the performing arts. Heating requirements have been reduced to 500 MJ/m {sup 2} of floor space annually compared to a predicted 1,760 MJ/m{sup 2} of floor space based on HOTCAN analysis of the heating requirements without the energy conservation measures. 9 figs., 10 tabs.

  10. Scriptwriting for the Audio-Visual Media: Radio, Films, Television, Filmstrips, Slidefilms.

    Science.gov (United States)

    Edmonds, Robert

    Intended as a guide for prospective scriptwriters, this handbook provides information about and examples of scripts for radio, films, and television. The scriptwriter's role in the preparation of filmstrips, sound slidefilms, commercial announcements, and storyboards is also examined. The book offers guidance in the techniques of getting writing…

  11. DEVELOPMENT OF FILMSTRIP SEQUENCE PHOTOGRAPHS AND SOUND REPRODUCTION OF EDUCATIONAL TELEVISION PRESENTATIONS.

    Science.gov (United States)

    MARTINI, HARRY R.

    BLACK AND WHITE FILMSTRIPS THAT REPRODUCED STILL PICTURES AND SOUND TRACK FROM EDUCATIONAL TELEVISION BROADCASTS WERE USED TO STUDY THE EFFECTIVENESS OF ETV REPRODUCTIONS IN AIDING POOR ACHIEVERS. THE SPECIFIC ADVANTAGE OF SUCH A REPRODUCTION WAS THAT IT COULD BE PACED TO THE LEARNING TEMPO OF THE STUDENTS RATHER THAN USING THE TOO-FAST PACE OF A…

  12. On the Use of the Guild Concept in Plant Ecology

    OpenAIRE

    Kroon, Hans de; Olff, Han

    1995-01-01

    The original defmition of the guild is reiterated and the concept discussed and placed in the context of related concepts such as resources and competition. From this conceptual framework the current use of guilds in studies of plant community ecology is evaluated. We discuss the criteria with which species are assigned to guilds, the association of guilds with specific communities, the resource classes on which guilds are based, and the competitive relationships between species of a guild. W...

  13. Public Policy and Corporate Protectionism: Regional Institutions and Textile Guilds in Seventeenth Century Aragon

    Directory of Open Access Journals (Sweden)

    José Antonio MATEOS ROYO

    2015-12-01

    Full Text Available Based on a regional case study, this article will argue that the craft guilds could respond adaptively to changing economic and institutional factors. This flexibility would limit any independent and regular impact of these guilds on regional or state economies in early modern Europe. Having contributed to economic growth in the sixteenth century, the Aragonese textile guilds fell prey to technological stagnation in the seventeenth, while restricting competition in urban product and labour markets as the region’s economy contracted. Their actions thus undermined quality and raised the cost of domestic manufactures. The regional institutions nevertheless tolerated these strategies within certain limits, because they saw the guilds as necessary to organize urban markets and production.

  14. McGraw-Hill: Filmstrips, Records, 8mm Film Loops, Transparencies, Globegraphic System for Elementary Grades, Junior & Senior High School, College.

    Science.gov (United States)

    McGraw-Hill Films, New York, NY.

    This catalog lists audiovisual aids available from McGraw-Hill, with prices for individual items and for sets. Approximately 250 series of filmstrips are listed under subject headings. About half of these are intended for elementary schools use, and half are intended for secondary sch ols and colleges. Some filmstrips come with sound recordings,…

  15. Abundance and guild structure of grasshoppers (Orthoptera ...

    African Journals Online (AJOL)

    1995-01-18

    Jan 18, 1995 ... April, 1994, we compared the abundance and guild structure .... was placed in a functional group on the basis of taxonomic ... hypothesis that they would be unaffected by changes in the ..... spatial separation from the heavily grazed area. the lightly ..... found to increase (Morris 1967, 1969, 1979; Morris &.

  16. Role of intraguild predation in aphidophagous guilds

    Czech Academy of Sciences Publication Activity Database

    Hemptinne, J. L.; Magro, A.; Saladin, C.; Dixon, Anthony F. G.

    2012-01-01

    Roč. 136, č. 3 (2012), s. 161-170 ISSN 0931-2048 Institutional support: RVO:67179843 Keywords : aphidophagous guilds * cost of intraguild predation * interspecific predation * intraguild predation * ladybird beetles * omnivory Subject RIV: EH - Ecology, Behaviour Impact factor: 1.560, year: 2012

  17. Global patterns of guild composition and functional diversity of spiders.

    Directory of Open Access Journals (Sweden)

    Pedro Cardoso

    Full Text Available The objectives of this work are: (1 to define spider guilds for all extant families worldwide; (2 test if guilds defined at family level are good surrogates of species guilds; (3 compare the taxonomic and guild composition of spider assemblages from different parts of the world; (4 compare the taxonomic and functional diversity of spider assemblages and; (5 relate functional diversity with habitat structure. Data on foraging strategy, prey range, vertical stratification and circadian activity was collected for 108 families. Spider guilds were defined by hierarchical clustering. We searched for inconsistencies between family guild placement and the known guild of each species. Richness and abundance per guild before and after correcting guild placement were compared, as were the proportions of each guild and family between all possible pairs of sites. Functional diversity per site was calculated based on hierarchical clustering. Eight guilds were discriminated: (1 sensing, (2 sheet, (3 space, and (4 orb web weavers; (5 specialists; (6 ambush, (7 ground, and (8 other hunters. Sixteen percent of the species richness corresponding to 11% of all captured individuals was incorrectly attributed to a guild by family surrogacy; however, the correlation of uncorrected vs. corrected guilds was invariably high. The correlation of guild richness or abundances was generally higher than the correlation of family richness or abundances. Functional diversity was not always higher in the tropics than in temperate regions. Families may potentially serve as ecological surrogates for species. Different families may present similar roles in the ecosystems, with replacement of some taxa by other within the same guild. Spiders in tropical regions seem to have higher redundancy of functional roles and/or finer resource partitioning than in temperate regions. Although species and family diversity were higher in the tropics, functional diversity seems to be also

  18. Contribution of sea ice microbial production to Antarctic benthic communities is driven by sea ice dynamics and composition of functional guilds.

    Science.gov (United States)

    Wing, Stephen R; Leichter, James J; Wing, Lucy C; Stokes, Dale; Genovese, Sal J; McMullin, Rebecca M; Shatova, Olya A

    2018-04-28

    Organic matter produced by the sea ice microbial community (SIMCo) is an important link between sea ice dynamics and secondary production in near-shore food webs of Antarctica. Sea ice conditions in McMurdo Sound were quantified from time series of MODIS satellite images for Sept. 1 through Feb. 28 of 2007-2015. A predictable sea ice persistence gradient along the length of the Sound and evidence for a distinct change in sea ice dynamics in 2011 were observed. We used stable isotope analysis (δ 13 C and δ 15 N) of SIMCo, suspended particulate organic matter (SPOM) and shallow water (10-20 m) macroinvertebrates to reveal patterns in trophic structure of, and incorporation of organic matter from SIMCo into, benthic communities at eight sites distributed along the sea ice persistence gradient. Mass-balance analysis revealed distinct trophic architecture among communities and large fluxes of SIMCo into the near-shore food web, with the estimates ranging from 2 to 84% of organic matter derived from SIMCo for individual species. Analysis of patterns in density, and biomass of macroinvertebrate communities among sites allowed us to model net incorporation of organic matter from SIMCo, in terms of biomass per unit area (g/m 2 ), into benthic communities. Here, organic matter derived from SIMCo supported 39 to 71 per cent of total biomass. Furthermore, for six species, we observed declines in contribution of SIMCo between years with persistent sea ice (2008-2009) and years with extensive sea ice breakout (2012-2015). Our data demonstrate the vital role of SIMCo in ecosystem function in Antarctica and strong linkages between sea ice dynamics and near-shore secondary productivity. These results have important implications for our understanding of how benthic communities will respond to changes in sea ice dynamics associated with climate change and highlight the important role of shallow water macroinvertebrate communities as sentinels of change for the Antarctic marine

  19. Coping in the World of Work. Practice in Problem Solving. Presentation Scripts. Filmstrip No. 1: Problems on the Job; and Filmstrip No. 2: Work Entry and Job Adjustment Problems.

    Science.gov (United States)

    Ohio State Univ., Columbus. Center for Vocational Education.

    Presentation scripts for two sound filmstrips are contained in this document, which accompanies a career development unit on coping in the world of work designed to assist students in developing coping strategies to deal with work entry and job adjustment problems. (Other components of the unit--instructor's handbook, student guide, and…

  20. Resilience and stability in bird guilds across tropical countryside

    Science.gov (United States)

    Karp, Daniel S.; Ziv, Guy; Zook, Jim; Ehrlich, Paul R.; Daily, Gretchen C.

    2011-01-01

    The consequences of biodiversity decline in intensified agricultural landscapes hinge on surviving biotic assemblages. Maintaining crucial ecosystem processes and services requires resilience to natural and anthropogenic disturbances. However, the resilience and stability of surviving biological communities remain poorly quantified. From a 10-y dataset comprising 2,880 bird censuses across a land-use gradient, we present three key findings concerning the resilience and stability of Costa Rican bird communities. First, seed dispersing, insect eating, and pollinating guilds were more resilient to low-intensity land use than high-intensity land use. Compared with forest assemblages, bird abundance, species richness, and diversity were all ∼15% lower in low-intensity land use and ∼50% lower in high-intensity land use. Second, patterns in species richness generally correlated with patterns in stability: guilds exhibited less variation in abundance in low-intensity land use than in high-intensity land use. Finally, interspecific differences in reaction to environmental change (response diversity) and possibly the portfolio effect, but not negative covariance of species abundances, conferred resilience and stability. These findings point to the changes needed in agricultural production practices in the tropics to better sustain bird communities and, possibly, the functional and service roles that they play. PMID:22160726

  1. WORK AND ORGANIZATION IN THE OTTOMAN EMPIRE: NOTES ON THE TRADE GUILDS OF SIXTEENTH- AND SEVENTEENTH CENTURY BURSA

    Directory of Open Access Journals (Sweden)

    Dr. Ömer DÜZBAKAR

    2008-09-01

    Full Text Available The primary function of artisans’ and commercial guilds was toperform and maintain daily activities of economic life in harmony andsocial consolidation with minimal conflict. Thus, the state would get ridof the heavy burden of bureaucratic procedures on the one hand, and yetwould also have the guilds yield to a standard of production as well aseliminate unfair competition through their autonomous internal workingson the other. Through such an auto-control mechanism the guilds wouldsolve their own problems with minimum resort to administrative andjudicial institutions. This article sheds light on the origins of Ottomanguild system, workings of trade guilds of Bursa and the supervisoryfunctions of their managers as well as on the various roles and activitiesplayed by the guilds in imperial public life. It also examines the conflictsof interest, unruly acts and forms of resolution taking place within andacross the guilds, with or without having recourse to judicial and otherimperial authorities. The study is based on a set of original historical documents surveyed from the Shari’a Court records of Bursa in the 16thand 17th centuries.

  2. Player guild dynamics and evolution in massively multiplayer online games.

    Science.gov (United States)

    Chen, Chien-Hsun; Sun, Chuen-Tsai; Hsieh, Jilung

    2008-06-01

    In the latest versions of massively multiplayer online games (MMOGs), developers have purposefully made guilds part of game environments. Guilds represent a powerful method for giving players a sense of online community, but there is little quantitative data on guild dynamics. To address this topic, we took advantage of a feature found in one of today's most popular MMOGs (World of Warcraft) to collect in-game data: user interfaces that players can modify and refine. In addition to collecting data on in-game player activities, we used this feature to observe and investigate how players join and leave guilds. Data were analyzed for the purpose of identifying factors that propel game-world guild dynamics and evolution. After collecting data for 641,805 avatars on 62 Taiwanese World of Warcraft game servers between February 10 and April 10, 2006, we created five guild type categories (small, large, elite, newbie, and unstable) that have different meanings in terms of in-game group dynamics. By viewing players as the most important resource affecting guild life cycles, it is possible to analyze game worlds as ecosystems consisting of evolving guilds and to study how guild life cycles reflect game world characteristics.

  3. Feeding guild composition of a macrobenthic subtidal community along a depth gradient

    Directory of Open Access Journals (Sweden)

    Marina Dolbeth

    2009-06-01

    Full Text Available The feeding guild composition of a macrobenthic community from southern Portugal was studied along a depth gradient (1.3 to 32 m. This gradient comprised shallow areas with severe physical stress and deeper areas with no significant hydrodynamic impact at the seafloor. The main goal was to determine the influence of the spatial and temporal differences of the hydrodynamic impact at the seafloor on the feeding guild composition of the macrobenthic community. The feeding guild composition changed gradually with depth, which reflects the differences in the hydrodynamics impact at the seafloor. Herbivores and sand-lickers dominated at the shallowest depths with fine sands, which correlated with higher levels of primary production. Scavengers were also distributed in the shallow areas, which was associated with the lower predation impact. Suspension feeders, in accordance with their physiological requirements, were distributed in coarser sands subjected to a physical impact. Carnivores, surface deposit feeders and sub-surface deposit feeders were distributed mainly below 8 m depth, where there was no significant impact from the wave climate. Carnivores were associated with coarser sands and were mainly small polychaetes and nemerteans. Sub-surface and surface deposit feeders were more abundant in the deepest areas of the depth gradient with fine sands and mud deposits with higher organic content. However, surface deposit feeders also occurred at shallower depths. Some seasonal differences related to disturbance impacts were found in the numerical dominance of the feeding guilds.

  4. Diet compositions and trophic guild structure of the eastern Chukchi Sea demersal fish community

    Science.gov (United States)

    Whitehouse, George A.; Buckley, Troy W.; Danielson, Seth L.

    2017-01-01

    Fishes are an important link in Arctic marine food webs, connecting production of lower trophic levels to apex predators. We analyzed 1773 stomach samples from 39 fish species collected during a bottom trawl survey of the eastern Chukchi Sea in the summer of 2012. We used hierarchical cluster analysis of diet dissimilarities on 21 of the most well sampled species to identify four distinct trophic guilds: gammarid amphipod consumers, benthic invertebrate generalists, fish and shrimp consumers, and zooplankton consumers. The trophic guilds reflect dominant prey types in predator diets. We used constrained analysis of principal coordinates (CAP) to determine if variation within the composite guild diets could be explained by a suite of non-diet variables. All CAP models explained a significant proportion of the variance in the diet matrices, ranging from 7% to 25% of the total variation. Explanatory variables tested included latitude, longitude, predator length, depth, and water mass. These results indicate a trophic guild structure is present amongst the demersal fish community during summer in the eastern Chukchi Sea. Regular monitoring of the food habits of the demersal fish community will be required to improve our understanding of the spatial, temporal, and interannual variation in diet composition, and to improve our ability to identify and predict the impacts of climate change and commercial development on the structure and functioning of the Chukchi Sea ecosystem.

  5. The anatomy lessons of the Amsterdam Guild of Surgeons

    NARCIS (Netherlands)

    IJpma, F.F.A.

    2014-01-01

    Mandatory lessons in anatomy, taught by the praelector anatomiae (lecturer in anatomy) of the Amsterdam Guild of Surgeons, were an important part of the surgical training starting in the 16th century. We describe how surgeons were trained approximately 350 years ago at the Surgeons’ Guild. The role

  6. On the Use of the Guild Concept in Plant Ecology

    NARCIS (Netherlands)

    Kroon, Hans de; Olff, Han

    1995-01-01

    The original defmition of the guild is reiterated and the concept discussed and placed in the context of related concepts such as resources and competition. From this conceptual framework the current use of guilds in studies of plant community ecology is evaluated. We discuss the criteria with which

  7. Obstructed abdominal hernia at the Wesley Guild Hospital, Nigeria ...

    African Journals Online (AJOL)

    Obstructed abdominal hernia at the Wesley Guild Hospital, Nigeria. ... wall hernia who had operative intervention and other postoperative management. ... elective in 23 patients (21%) who had spontaneous reduction while awaiting surgery.

  8. Environmental correlates underlying elevational richness, abundance, and biomass patterns of multi-feeding guilds in litter invertebrates across the treeline.

    Science.gov (United States)

    Xu, Guorui; Zhang, Shuang; Zhang, Yuxin; Ma, Keming

    2018-08-15

    Elevational richness patterns and underlying environmental correlates have contributed greatly to a range of general theories of biodiversity. However, the mechanisms underlying elevational abundance and biomass patterns across several trophic levels in belowground food webs remain largely unknown. In this study, we aimed to disentangle the relationships between the elevational patterns of different trophic levels of litter invertebrates and their underlying environmental correlates for two contrasting ecosystems separated by the treeline. We sampled 119 plots from 1020 to 1770 asl in forest and 21 plots from 1790 to 2280 asl in meadow on Dongling Mountain, northwest of Beijing, China. Four functional guilds were divided based on feeding regime: omnivores, herbivores, predators, and detritivores. We used eigenvector-based spatial filters to account for spatial autocorrelation and multi-model selection to determine the best environmental correlates for the community attributes of the different feeding guilds. The results showed that the richness, abundance and biomass of omnivores declined with increasing elevation in the meadow, whereas there was a hump-shaped richness pattern for detritivores. The richness and abundance of different feeding guilds were positively correlated in the forest, while not in the meadow. In the forest, the variances of richness in omnivores, predators, and detritivores were mostly correlated with litter thickness, with omnivores being best explained by mean annual temperature in the meadow. In conclusion, hump-shaped elevational richness, abundance and biomass patterns driven by the forest gradient below the treeline existed in all feeding guilds of litter invertebrates. Climate replaced productivity as the primary factor that drove the richness patterns of omnivores above the treeline, whereas heterogeneity replaced climate for herbivores. Our results highlight that the correlated elevational richness, abundance, and biomass patterns of

  9. Nitrous Oxide (N2O) Emissions by Termites: Does the Feeding Guild Matter?

    Science.gov (United States)

    Brauman, Alain; Majeed, Muhammad Zeeshan; Buatois, Bruno; Robert, Alain; Pablo, Anne-Laure; Miambi, Edouard

    2015-01-01

    In the tropics, termites are major players in the mineralization of organic matter leading to the production of greenhouse gases including nitrous oxide (N2O). Termites have a wide trophic diversity and their N-metabolism depends on the feeding guild. This study assessed the extent to which N2O emission levels were determined by termite feeding guild and tested the hypothesis that termite species feeding on a diet rich in N emit higher levels of N2O than those feeding on a diet low in N. An in-vitro incubation approach was used to determine the levels of N2O production in 14 termite species belonging to different feeding guilds, collected from a wide range of biomes. Fungus-growing and soil-feeding termites emit N2O. The N2O production levels varied considerably, ranging from 13.14 to 117.62 ng N2O-N d(-1) (g dry wt.)(-1) for soil-feeding species, with Cubitermes spp. having the highest production levels, and from 39.61 to 65.61 ng N2O-N d(-1) (g dry wt.)(-1) for fungus-growing species. Wood-feeding termites were net N2O consumers rather than N2O producers with a consumption ranging from 16.09 to 45.22 ng N2O-N d(-1) (g dry wt.)(-1). Incubating live termites together with their mound increased the levels of N2O production by between 6 and 13 fold for soil-feeders, with the highest increase in Capritermes capricornis, and between 14 and 34 fold for fungus-growers, with the highest increase in Macrotermes muelleri. Ammonia-oxidizing (amoA-AOB and amoA-AOA) and denitrifying (nirK, nirS, nosZ) gene markers were detected in the guts of all termite species studied. No correlation was found between the abundance of these marker genes and the levels of N2O production from different feeding guilds. Overall, these results support the hypothesis that N2O production rates were higher in termites feeding on substrates with higher N content, such as soil and fungi, compared to those feeding on N-poor wood.

  10. Nitrous Oxide (N2O Emissions by Termites: Does the Feeding Guild Matter?

    Directory of Open Access Journals (Sweden)

    Alain Brauman

    Full Text Available In the tropics, termites are major players in the mineralization of organic matter leading to the production of greenhouse gases including nitrous oxide (N2O. Termites have a wide trophic diversity and their N-metabolism depends on the feeding guild. This study assessed the extent to which N2O emission levels were determined by termite feeding guild and tested the hypothesis that termite species feeding on a diet rich in N emit higher levels of N2O than those feeding on a diet low in N. An in-vitro incubation approach was used to determine the levels of N2O production in 14 termite species belonging to different feeding guilds, collected from a wide range of biomes. Fungus-growing and soil-feeding termites emit N2O. The N2O production levels varied considerably, ranging from 13.14 to 117.62 ng N2O-N d(-1 (g dry wt.(-1 for soil-feeding species, with Cubitermes spp. having the highest production levels, and from 39.61 to 65.61 ng N2O-N d(-1 (g dry wt.(-1 for fungus-growing species. Wood-feeding termites were net N2O consumers rather than N2O producers with a consumption ranging from 16.09 to 45.22 ng N2O-N d(-1 (g dry wt.(-1. Incubating live termites together with their mound increased the levels of N2O production by between 6 and 13 fold for soil-feeders, with the highest increase in Capritermes capricornis, and between 14 and 34 fold for fungus-growers, with the highest increase in Macrotermes muelleri. Ammonia-oxidizing (amoA-AOB and amoA-AOA and denitrifying (nirK, nirS, nosZ gene markers were detected in the guts of all termite species studied. No correlation was found between the abundance of these marker genes and the levels of N2O production from different feeding guilds. Overall, these results support the hypothesis that N2O production rates were higher in termites feeding on substrates with higher N content, such as soil and fungi, compared to those feeding on N-poor wood.

  11. Business in the Middle Ages: What Was the Role of Guilds?

    Science.gov (United States)

    Bosshardt, William; Lopus, Jane S.

    2013-01-01

    Guilds are defined as associations of craftsmen and merchants formed to promote the economic interests of their members as well as to provide protection and mutual aid. As both business and social organizations, guilds were prolific throughout Europe between the eleventh and sixteenth centuries. Guilds were organized so that workers would learn…

  12. Physa Marmorata Guilding, 1828 (Pulmonata: Physidae

    Directory of Open Access Journals (Sweden)

    W. Lobato Paraense

    1986-12-01

    Full Text Available A description of Physa marmorata Guilding, 1828, based on material collected at its type-locality, the Caribbean island of Saint Vincent, is presented. The shell is thin, horn-colored, surface very glossy, diaphanous. Spire acute, elevated; protoconch distinct, rounded-conical, reddish-brown; five not shouldered, broadly convex whorls with subobsolete spiral lines and thin growth lines. Aperture elongated, 1.4-2.0 times as long as the remaining shell length, narrow obovate-lunate; upper half acute-angled,lower half oval,narrowly rounded at the base, outer lip sharp, inner lip completely closing the umbilical region; a very distinct callus on the parietal wall; columellar lip with a low ridge gradually merging into the callus. ratios: shell width/shell length = 0.44 - 0.52 (mean 0.47; spire length /shell lenght = 0.33-0.41 (mean 0.39; aperture length/shell lenght = 0.59-0.67 (mean 0.62. Oral lappets laterally mucronate, foot spatulate with deeply pigmented acuminate tail. Mantle reflection with 6-10 short triangular dentations covering nearly half the right surface of the body whorl, and 4-6 covering a part of the ventral wall. Body surface with tiny dots of greenish-yellow pigment besides melanin. Renal tube tightly folded in toa zigzag course. Ovotestis diverticula acinous, laterally pressed against each other around a collecting canal. Ovispermiduct with well-developed seminal vesicle. oviduct highly convoluted, merging into a less convoluted nidamental gland which narrows to a funnel-shaped uterus and a short vagina. Spermathecal body oblong, more or less constricted in the middle and somewhat curved; spermathecal duct uniformly narrow, a little longer than be body. About 20 prostatic diverticula, simple, bifurcate or divided into a few short branches, distalmost ones assembled into a cluster. Penis long, nearly uniformly narrow; penial canal with lateral opening about the junction of its middle and lower thirds. Penial sheath with a bulbous

  13. Dynamic stability in hydropsychid guilds along a regulated stream: the role of competitive interactions versus environmental perturbations

    International Nuclear Information System (INIS)

    Camargo, J.O.

    1993-01-01

    Temporal alterations in the structure of hydropsychid guilds were studied along a regulated stream to examine the role of interspecific competitive interactions and environmental perturbations in determining species persistence. Discharge fluctuations of hypolimnial waters with a significant oxygen deficit were produced daily by Burgomillodo Dam. Under unregulated conditions (upstream sampling site), it is assumed that the coexistence of competing hydropsychid species is a function of species dominance (d') and resource limitation (R), as major cause of interaction strength among competitors, and the niche overlap (O) as a major causes of connectance among competitors, d' tends to increase with the number of subordinate species. A hydropsychid guild will tend to be unstable (by competitive displacement) if d'R(SO) 0.5 > 1, where S is the number of competing species in the guild. The product d'R(SO) 0.5 is used as a competition coefficient (β'); R and O are assumed to be 1 and 0.5, respectively. Upstream from the dam, values of β' were 0.599, 1.080 and 0.656, and values of S were 7,7 and 6. Downstream β' was less than unity during all sampling surveys, but S decreased at all sampling sites. Total density and total biomass were significantly higher downstream. Hydropsyche pellucidula was dominant upstream, whereas H. siltalai became dominant downstream. Temporal variations in individual weights of H. bulbifera and H. exocellata downstream were different from those upsteam. This is interpreted as 'character displacement. It is concluded that interspecific competitive interactions upstream and environmental perturbations downstream determined species persistence in hydropsychid guilds. (Author)

  14. Carcass Type Affects Local Scavenger Guilds More than Habitat Connectivity.

    Directory of Open Access Journals (Sweden)

    Zachary H Olson

    Full Text Available Scavengers and decomposers provide an important ecosystem service by removing carrion from the environment. Scavenging and decomposition are known to be temperature-dependent, but less is known about other factors that might affect carrion removal. We conducted an experiment in which we manipulated combinations of patch connectivity and carcass type, and measured responses by local scavenger guilds along with aspects of carcass depletion. We conducted twelve, 1-month trials in which five raccoon (Procyon lotor, Virginia opossum (Didelphis virginiana, and domestic rabbit (Oryctolagus spp. carcasses (180 trials total were monitored using remote cameras in 21 forest patches in north-central Indiana, USA. Of 143 trials with complete data, we identified fifteen species of vertebrate scavengers divided evenly among mammalian (N = 8 and avian species (N = 7. Fourteen carcasses (9.8% were completely consumed by invertebrates, vertebrates exhibited scavenging behavior at 125 carcasses (87.4%, and four carcasses (2.8% remained unexploited. Among vertebrates, mammals scavenged 106 carcasses, birds scavenged 88 carcasses, and mammals and birds scavenged 69 carcasses. Contrary to our expectations, carcass type affected the assemblage of local scavenger guilds more than patch connectivity. However, neither carcass type nor connectivity explained variation in temporal measures of carcass removal. Interestingly, increasing richness of local vertebrate scavenger guilds contributed moderately to rates of carrion removal (≈6% per species increase in richness. We conclude that scavenger-specific differences in carrion utilization exist among carcass types and that reliable delivery of carrion removal as an ecosystem service may depend on robust vertebrate and invertebrate communities acting synergistically.

  15. Carcass Type Affects Local Scavenger Guilds More than Habitat Connectivity

    Science.gov (United States)

    Olson, Zachary H.; Beasley, James C.; Rhodes, Olin E.

    2016-01-01

    Scavengers and decomposers provide an important ecosystem service by removing carrion from the environment. Scavenging and decomposition are known to be temperature-dependent, but less is known about other factors that might affect carrion removal. We conducted an experiment in which we manipulated combinations of patch connectivity and carcass type, and measured responses by local scavenger guilds along with aspects of carcass depletion. We conducted twelve, 1-month trials in which five raccoon (Procyon lotor), Virginia opossum (Didelphis virginiana), and domestic rabbit (Oryctolagus spp.) carcasses (180 trials total) were monitored using remote cameras in 21 forest patches in north-central Indiana, USA. Of 143 trials with complete data, we identified fifteen species of vertebrate scavengers divided evenly among mammalian (N = 8) and avian species (N = 7). Fourteen carcasses (9.8%) were completely consumed by invertebrates, vertebrates exhibited scavenging behavior at 125 carcasses (87.4%), and four carcasses (2.8%) remained unexploited. Among vertebrates, mammals scavenged 106 carcasses, birds scavenged 88 carcasses, and mammals and birds scavenged 69 carcasses. Contrary to our expectations, carcass type affected the assemblage of local scavenger guilds more than patch connectivity. However, neither carcass type nor connectivity explained variation in temporal measures of carcass removal. Interestingly, increasing richness of local vertebrate scavenger guilds contributed moderately to rates of carrion removal (≈6% per species increase in richness). We conclude that scavenger-specific differences in carrion utilization exist among carcass types and that reliable delivery of carrion removal as an ecosystem service may depend on robust vertebrate and invertebrate communities acting synergistically. PMID:26886299

  16. Carcass Type Affects Local Scavenger Guilds More than Habitat Connectivity.

    Science.gov (United States)

    Olson, Zachary H; Beasley, James C; Rhodes, Olin E

    2016-01-01

    Scavengers and decomposers provide an important ecosystem service by removing carrion from the environment. Scavenging and decomposition are known to be temperature-dependent, but less is known about other factors that might affect carrion removal. We conducted an experiment in which we manipulated combinations of patch connectivity and carcass type, and measured responses by local scavenger guilds along with aspects of carcass depletion. We conducted twelve, 1-month trials in which five raccoon (Procyon lotor), Virginia opossum (Didelphis virginiana), and domestic rabbit (Oryctolagus spp.) carcasses (180 trials total) were monitored using remote cameras in 21 forest patches in north-central Indiana, USA. Of 143 trials with complete data, we identified fifteen species of vertebrate scavengers divided evenly among mammalian (N = 8) and avian species (N = 7). Fourteen carcasses (9.8%) were completely consumed by invertebrates, vertebrates exhibited scavenging behavior at 125 carcasses (87.4%), and four carcasses (2.8%) remained unexploited. Among vertebrates, mammals scavenged 106 carcasses, birds scavenged 88 carcasses, and mammals and birds scavenged 69 carcasses. Contrary to our expectations, carcass type affected the assemblage of local scavenger guilds more than patch connectivity. However, neither carcass type nor connectivity explained variation in temporal measures of carcass removal. Interestingly, increasing richness of local vertebrate scavenger guilds contributed moderately to rates of carrion removal (≈6% per species increase in richness). We conclude that scavenger-specific differences in carrion utilization exist among carcass types and that reliable delivery of carrion removal as an ecosystem service may depend on robust vertebrate and invertebrate communities acting synergistically.

  17. Spatial and temporal structure of a mesocarnivore guild in midwestern north America

    Science.gov (United States)

    Damon B. Lesmeister; Clayton K. Nielsen; Eric M. Schauber; Eric C. Hellgren

    2015-01-01

    Carnivore guilds play a vital role in ecological communities by cascading trophic effects, energy and nutrient transfer, and stabilizing or destabilizing food webs. Consequently, the structure of carnivore guilds can be critical to ecosystem patterns. Body size is a crucial influence on intraguild interactions, because it affects access to prey resources, effectiveness...

  18. Trading guilds and business dealings in the mediaeval Dubrovnik

    Directory of Open Access Journals (Sweden)

    Blagojević Mirjana

    2014-01-01

    Full Text Available Trading guilds, regulated under the norms of the Dubrovnik Statute, were known under the names entega, collegantia and rogantia. The first one was an association of labour, capital and funds for carrying out business activities, the second one stood on the cross-road between the trading dealings and enterprising ventures, while the third one was, in actual fact, a form of intermediation. Some of their forms are recognised also in the legal systems of the other Adriatic communes, but the best developed regulating norms prevailed in Dubrovnik. It was there that the original forms of association, adopted from the Byzantine practice and law, found a fertile ground for further expansion. The most complex form of these associations, the entega, was not to be found after the 16th century, while collegantia gradually ascended into a limited partnership society, i.e. into the crediting business.

  19. The influence of weather and lemmings on spatiotemporal variation in the abundance of multiple avian guilds in the arctic.

    Directory of Open Access Journals (Sweden)

    Barry G Robinson

    Full Text Available Climate change is occurring more rapidly in the Arctic than other places in the world, which is likely to alter the distribution and abundance of migratory birds breeding there. A warming climate can provide benefits to birds by decreasing spring snow cover, but increases in the frequency of summer rainstorms, another product of climate change, may reduce foraging opportunities for insectivorous birds. Cyclic lemming populations in the Arctic also influence bird abundance because Arctic foxes begin consuming bird eggs when lemmings decline. The complex interaction between summer temperature, precipitation, and the lemming cycle hinder our ability to predict how Arctic-breeding birds will respond to climate change. The main objective of this study was to investigate the relationship between annual variation in weather, spring snow cover, lemming abundance and spatiotemporal variation in the abundance of multiple avian guilds in a tundra ecosystem in central Nunavut, Canada: songbirds, shorebirds, gulls, loons, and geese. We spatially stratified our study area based on vegetation productivity, terrain ruggedness, and freshwater abundance, and conducted distance sampling to estimate strata-specific densities of each guild during the summers of 2010-2012. We also monitored temperature, rainfall, spring snow cover, and lemming abundance each year. Spatial variation in bird abundance matched what was expected based on previous ecological knowledge, but weather and lemming abundance also significantly influenced the abundance of some guilds. In particular, songbirds were less abundant during the cool, wet summer with moderate snow cover, and shorebirds and gulls declined with lemming abundance. The abundance of geese did not vary over time, possibly because benefits created by moderate spring snow cover were offset by increased fox predation when lemmings were scarce. Our study provides an example of a simple way to monitor the correlation between

  20. Genome-Enabled Modeling of Biogeochemical Processes Predicts Metabolic Dependencies that Connect the Relative Fitness of Microbial Functional Guilds

    Science.gov (United States)

    Brodie, E.; King, E.; Molins, S.; Karaoz, U.; Steefel, C. I.; Banfield, J. F.; Beller, H. R.; Anantharaman, K.; Ligocki, T. J.; Trebotich, D.

    2015-12-01

    Pore-scale processes mediated by microorganisms underlie a range of critical ecosystem services, regulating carbon stability, nutrient flux, and the purification of water. Advances in cultivation-independent approaches now provide us with the ability to reconstruct thousands of genomes from microbial populations from which functional roles may be assigned. With this capability to reveal microbial metabolic potential, the next step is to put these microbes back where they belong to interact with their natural environment, i.e. the pore scale. At this scale, microorganisms communicate, cooperate and compete across their fitness landscapes with communities emerging that feedback on the physical and chemical properties of their environment, ultimately altering the fitness landscape and selecting for new microbial communities with new properties and so on. We have developed a trait-based model of microbial activity that simulates coupled functional guilds that are parameterized with unique combinations of traits that govern fitness under dynamic conditions. Using a reactive transport framework, we simulate the thermodynamics of coupled electron donor-acceptor reactions to predict energy available for cellular maintenance, respiration, biomass development, and enzyme production. From metagenomics, we directly estimate some trait values related to growth and identify the linkage of key traits associated with respiration and fermentation, macromolecule depolymerizing enzymes, and other key functions such as nitrogen fixation. Our simulations were carried out to explore abiotic controls on community emergence such as seasonally fluctuating water table regimes across floodplain organic matter hotspots. Simulations and metagenomic/metatranscriptomic observations highlighted the many dependencies connecting the relative fitness of functional guilds and the importance of chemolithoautotrophic lifestyles. Using an X-Ray microCT-derived soil microaggregate physical model combined

  1. Guild of Frugivores on three fruit-producing tree species Polyscias ...

    African Journals Online (AJOL)

    Guild of Frugivores on three fruit-producing tree species Polyscias fulva, Syzyguim Guineensis SUBSP. Bamensdae and Pouteria Altissima ) in Ngel Nyaki Forest Reserve, a Montane Forest Ecosystem in Nigeria.

  2. Urbanization Drives a Reduction in Functional Diversity in a Guild of Nectar-feeding Birds

    Directory of Open Access Journals (Sweden)

    Anton Pauw

    2012-06-01

    Full Text Available Urbanization is a widespread and rapidly growing threat to biodiversity, therefore we need a predictive understanding of its effects on species and ecosystem processes. In this paper we study the impact of urbanization on a guild of nectar-feeding birds in a biodiversity hotspot at the Cape of Africa. The guild of four bird species provides important ecosystem services by pollinating 320 plant species in the Cape Floral Region. Functional diversity within the guild is related to differences in bill length. The long-billed Malachite Sunbird (Nectarinia famosa plays an irreplaceable role as the exclusive pollinator of plant species with long nectar tubes. We analyzed the composition of the guild in suburban gardens of Cape Town along a gradient of increasing distance from the nearest natural habitat. Urbanization reduces the functional diversity of the nectarivore guild. Malachite Sunbirds did not penetrate more than 1 km into the city, whereas only the short-billed Southern Double-collared Sunbirds (Cinnyris chalybea occurred throughout the urbanization gradient. The lack of data precludes conclusions regarding the detailed responses of Orange-breasted Sunbirds (Anthobaphes violacea and Sugarbirds (Promerops cafer, however their absence across the entire gradient is suggestive of high sensitivity. The functional diversity of this guild of pollinators can potentially be restored, but the pros and cons of this conservation action need to be considered.

  3. Lunge feeding in early marine reptiles and fast evolution of marine tetrapod feeding guilds.

    Science.gov (United States)

    Motani, Ryosuke; Chen, Xiao-hong; Jiang, Da-yong; Cheng, Long; Tintori, Andrea; Rieppel, Olivier

    2015-03-10

    Traditional wisdom holds that biotic recovery from the end-Permian extinction was slow and gradual, and was not complete until the Middle Triassic. Here, we report that the evolution of marine predator feeding guilds, and their trophic structure, proceeded faster. Marine reptile lineages with unique feeding adaptations emerged during the Early Triassic (about 248 million years ago), including the enigmatic Hupehsuchus that possessed an unusually slender mandible. A new specimen of this genus reveals a well-preserved palate and mandible, which suggest that it was a rare lunge feeder as also occurs in rorqual whales and pelicans. The diversity of feeding strategies among Triassic marine tetrapods reached their peak in the Early Triassic, soon after their first appearance in the fossil record. The diet of these early marine tetrapods most likely included soft-bodied animals that are not preserved as fossils. Early marine tetrapods most likely introduced a new trophic mechanism to redistribute nutrients to the top 10 m of the sea, where the primary productivity is highest. Therefore, a simple recovery to a Permian-like trophic structure does not explain the biotic changes seen after the Early Triassic.

  4. Forensically significant scavenging guilds in the southwest of Western Australia.

    Science.gov (United States)

    O'Brien, R Christopher; Forbes, Shari L; Meyer, Jan; Dadour, Ian

    2010-05-20

    during diurnal hours, were nocturnal feeders. The combined effects of the whole guild of scavengers significantly accelerated the later stages of decomposition, especially in the cooler months of the year when natural decomposition was slowest.

  5. Seasonal variation of assemblage and feeding guild structure of fish species in a boreal tidal basin

    Science.gov (United States)

    Kellnreitner, Florian; Pockberger, Moritz; Asmus, Harald

    2012-08-01

    Species composition, abundance, feeding relationships and guild structure of the fish assemblage in the Sylt-Rømø bight, a tidal basin in the northern Wadden Sea, were investigated to show seasonal differences and the importance of functional groups in this area. The tidal flats and in shallow subtidal areas were sampled using a beach seine and a bottom trawl net was used for deeper subtidal areas and tidal gullies. Species richness of fish was highest in summer where 26 species were caught, while the lowest richness was recorded in winter (17 species). Clear differences in species richness and abundance were found between shallow areas and deeper parts of the bight. Clupea harengus and Ammodytes tobianus were the most abundant species in deeper areas, while Pomatoschistus microps and Pomatoschistus minutus dominated shallower waters. Gut contents of 27 fish species were identified and the guild structure analyzed by UPGMA clustering of niche overlaps. Calanoid copepods (19.9%), Crangon crangon (18.2%) and mysid shrimps (8.4%) were the most abundant prey items of all fish species combined. Seven feeding guilds were present in the fall and winter, and eight and six in spring and summer, respectively. Fish feeding on calanoid copepods and C. crangon were present year round, whereas the occurrence of other guilds varied between seasons. Species composition of prey changed through seasons and, for some fish species, even the feeding mode itself varied with season. Most noticeable, 11 fish species changed guilds between seasons. We found a convergence in summer towards abundant prey items, whereas in winter diet overlap was lower. This is the first investigation of guild structure of almost all fish species present in a Wadden Sea area, and shows that consideration of seasonal differences is essential when determining feeding relationships of fish in temperate areas.

  6. Bat guilds, a concept to classify the highly diverse foraging and echolocation behaviors of microchiropteran bats

    Directory of Open Access Journals (Sweden)

    Annette eDenzinger

    2013-07-01

    Full Text Available Throughout evolution the foraging and echolocation behaviors as well as the motor systems of bats have been adapted to the tasks they have to perform while searching and acquiring food. When bats exploit the same class of environmental resources in a similar way, they perform comparable tasks and thus share similar adaptations independent of their phylogeny. Species with similar adaptations are assigned to guilds or functional groups. Habitat type and foraging mode mainly determine the foraging tasks and thus the adaptations of bats. Therefore we use habitat type and foraging mode to define seven guilds. The habitat types open, edge and narrow space are defined according to the bats’ echolocation behavior in relation to the distance between bat and background or food item and background. Bats foraging in the aerial, trawling, flutter detecting, or active gleaning mode use only echolocation to acquire their food. When foraging in the passive gleaning mode bats do not use echolocation but rely on sensory cues from the food item to find it. Bat communities often comprise large numbers of species with a high diversity in foraging areas, foraging modes, and diets. The assignment of species living under similar constraints into guilds identifies pattern of community structure and helps to understand the factors that underlie the organization of highly diverse bat communities. Bat species from different guilds do not compete for food as they differ in their foraging behavior and in the environmental resources they use. However, sympatric living species belonging to the same guild often exploit the same class of resources. To avoid competition they should differ in their niche dimensions. The fine grain structure of bat communities below the rather coarse classification into guilds is determined by mechanisms that result in niche partitioning.

  7. Does universal 16S rRNA gene amplicon sequencing of environmental communities provide an accurate description of nitrifying guilds?

    DEFF Research Database (Denmark)

    Diwan, Vaibhav; Albrechtsen, Hans-Jørgen; Smets, Barth F.

    2018-01-01

    amplicon sequencing and from guild targeted approaches. The universal amplicon sequencing provided 1) accurate estimates of nitrifier composition, 2) clustering of the samples based on these compositions consistent with sample origin, 3) estimates of the relative abundance of the guilds correlated...

  8. Numerical relationships of the Solidago altissima stem gall insect-parasitoid guild food chain.

    Science.gov (United States)

    Abrahamson, Warren G; Armbruster, Paulette O; Maddox, G David

    1983-06-01

    The field site conditions (soil pH, soil moisture, soil nutrient availability, etc.) and abundances of Solidago altissima (often included in S. canadensis sensu lato), three S. altissima specific stem gall formers, and the parasitepredator guilds for two of the three gall insects were investigated. It was found that S. altissima is tolerant of a wide range of site conditions. Herbivore (stem gall insects) occurrences were positively correlated with plant occurrence, in a linear fashion. However, there was no disproportionate increase in stem gall insect densities with plant density as might be predicted by the resource concentration hypothesis. Parasitoid guilds were exploiting stem gall insect populations over a wide range of occurrence, but were under-utilizing fields of higher herbivore occurrences. Path analysis showed a high degree of predictability in the causal models, with all but 14% of the ball gall parasitoid guild and all but 43% of the elliptical gall parasitoid guild occurrences explained by the direct influences of stem gall insect occurrence and the indirect influences of goldenrod occurrence and site conditions. The numerical relations of this three trophic level system suggest a well-integrated and well-controlled food chain.

  9. Does small mammal prey guild affect the exposure of predators to anticoagulant rodenticides?

    International Nuclear Information System (INIS)

    Tosh, D.G.; McDonald, R.A.; Bearhop, S.; Lllewellyn, N.R.; Fee, S.; Sharp, E.A.; Barnett, E.A.; Shore, R.F.

    2011-01-01

    Ireland has a restricted small mammal prey guild but still includes species most likely to consume anticoagulant rodenticide (AR) baits. This may enhance secondary exposure of predators to ARs. We compared liver AR residues in foxes (Vulpes vulpes) in Northern Ireland (NI) with those in foxes from Great Britain which has a more diverse prey guild but similar agricultural use of ARs. Liver ARs were detected in 84% of NI foxes, more than in a comparable sample of foxes from Scotland and similar to that of suspected AR poisoned animals from England and Wales. High exposure in NI foxes is probably due to greater predation of commensal rodents and non-target species most likely to take AR baits, and may also partly reflect greater exposure to highly persistent brodifacoum and flocoumafen. High exposure is likely to enhance risk and Ireland may be a sentinel for potential effects on predator populations. - Highlights: → Exposure of a predator to anticoagulant rodenticides was compared in Britain and Ireland. → Exposure was higher in Ireland. → Differences driven by small mammal prey guilds. → Ireland a potential sentinel for predator exposure to anticoagulants. - Restriction of the small mammal prey guild is associated with enhanced exposure of predators to anticoagulant rodenticides.

  10. Labor's New Deal for Journalism--The Newspaper Guild in the 1930s

    Science.gov (United States)

    Scott, Dale Benjamin

    2009-01-01

    The Depression and the New Deal brought together a variety of conditions and social forces that set up a formative clash over the institution of professional journalism. At the heart of that fight was the rise of the American Newspaper Guild and its battle for control over the trusteeship of the freedom of the press. The experience in the news…

  11. Evaluation of the City and Guilds Level 3 Adult 8umeracy Support ...

    African Journals Online (AJOL)

    This paper looks at the evaluation of the Level 3 Certificate in Adult Numeracy Support (City and Guilds 9484) course at Merton College. The latter is a general further education (FE) college and the main provider of post-16 education and training in the London Borough of Merton. The College also runs a number of higher ...

  12. Visualising the Guild Chapel, Stratford-upon-Avon: digital models as research tools in buildings archaeology

    Directory of Open Access Journals (Sweden)

    Kate Giles

    2012-07-01

    Full Text Available This article disseminates the results of a programme of detailed archaeological survey and archive research on one of Europe's most important surviving late-medieval Guild Chapels — that of the Holy Cross Guild, Stratford-upon-Avon (Warwickshire. Today the building is part of Stratford-upon-Avon's tourist trail, located directly opposite William Shakespeare's home, 'New Place', and visited by thousands of tourists every year. However, its archaeological and historical significance has been overlooked owing to the extensive restoration of the building in the 19th and 20th centuries. This destroyed evidence for an internationally significant scheme of wall paintings within the Chapel, paid for by the London Mayor and Stratford-upon-Avon merchant, Hugh Clopton, an important member of the Holy Cross Guild and the original builder of 'New Place'. The paintings also have an important connection with Stratford-upon-Avon's most famous son, William Shakespeare, whose father may have been involved in their destruction and removal during the 16th century. Research by a team of historical archaeologists and digital heritage specialists at the Department of Archaeology, University of York, has revealed the significance of the Guild Chapel through the creation of a digital model and textual paradata, which form the focus of this article. The project is ground-breaking in that it moves beyond the traditional use of digital models as virtual reconstructions of past buildings to use the model itself as a research tool through which the user can explore and validate the evidence for the scheme directly. This is achieved through the creation of a palimpsest of antiquarian drawings of the paintings, made as they were revealed during restoration works in the 19th and 20th centuries, and set within their 3-dimensional architectural context. The model allows the user to compare and contrast differences in the recording methods, iconographies and interpretations of

  13. Root-associated fungal communities along a primary succession on a mine spoil: Distinct ecological guilds assemble differently

    Czech Academy of Sciences Publication Activity Database

    Kolaříková, Z.; Kohout, Petr; Krüger, C.; Janoušková, M.; Mrnka, L.; Rydlová, J.

    2017-01-01

    Roč. 113, OCT (2017), s. 143-0152 ISSN 0038-0717 Institutional support: RVO:61388971 Keywords : Community composition * Ecological guilds * Primary succession Subject RIV: EE - Microbiology, Virology OBOR OECD: Microbiology Impact factor: 4.857, year: 2016

  14. Guild-specific responses of avian species richness to LiDAR-derived habitat heterogeneity

    Science.gov (United States)

    Weisberg, Peter J.; Dilts, Thomas E.; Becker, Miles E.; Young, Jock S.; Wong-Kone, Diane C.; Newton, Wesley E.; Ammon, Elisabeth M.

    2014-01-01

    Ecological niche theory implies that more heterogeneous habitats have the potential to support greater biodiversity. Positive heterogeneity-diversity relationships have been found for most studies investigating animal taxa, although negative relationships also occur and the scale dependence of heterogeneity-diversity relationships is little known. We investigated multi-scale, heterogeneity-diversity relationships for bird communities in a semi-arid riparian landscape, using airborne LiDAR data to derive key measures of structural habitat complexity. Habitat heterogeneity-diversity relationships were generally positive, although the overall strength of relationships varied across avian life history guilds (R2 range: 0.03–0.41). Best predicted were the species richness indices of cavity nesters, habitat generalists, woodland specialists, and foliage foragers. Heterogeneity-diversity relationships were also strongly scale-dependent, with strongest associations at the 200-m scale (4 ha) and weakest associations at the 50-m scale (0.25 ha). Our results underscore the value of LiDAR data for fine-grained quantification of habitat structure, as well as the need for biodiversity studies to incorporate variation among life-history guilds and to simultaneously consider multiple guild functional types (e.g. nesting, foraging, habitat). Results suggest that certain life-history guilds (foliage foragers, cavity nesters, woodland specialists) are more susceptible than others (ground foragers, ground nesters, low nesters) to experiencing declines in local species richness if functional elements of habitat heterogeneity are lost. Positive heterogeneity-diversity relationships imply that riparian conservation efforts need to not only provide high-quality riparian habitat locally, but also to provide habitat heterogeneity across multiple scales.

  15. Lunge feeding in early marine reptiles and fast evolution of marine tetrapod feeding guilds

    OpenAIRE

    Motani, R; Chen, XH; Jiang, DY; Cheng, L; Tintori, A; Rieppel, O

    2015-01-01

    Traditional wisdom holds that biotic recovery from the end-Permian extinction was slow and gradual, and was not complete until the Middle Triassic. Here, we report that the evolution of marine predator feeding guilds, and their trophic structure, proceeded faster. Marine reptile lineages with unique feeding adaptations emerged during the Early Triassic (about 248 million years ago), including the enigmatic Hupehsuchus that possessed an unusually slender mandible. A new specimen of this genus ...

  16. Diversity and disparity of sparassodonts (Metatheria) reveal non-analogue nature of ancient South American mammalian carnivore guilds

    Science.gov (United States)

    Dolgushina, Tatiana; Wesley, Gina

    2018-01-01

    This study investigates whether terrestrial mammalian carnivore guilds of ancient South America, which developed in relative isolation, were similar to those of other continents. We do so through analyses of clade diversification, ecomorphology and guild structure in the Sparassodonta, metatherians that were the predominant mammalian carnivores of pre-Pleistocene South America. Body mass and 16 characters of the dentition are used to quantify morphological diversity (disparity) in sparassodonts and to compare them to extant marsupial and placental carnivores and extinct North American carnivoramorphans. We also compare trophic diversity of the Early Miocene terrestrial carnivore guild of Santa Cruz, Argentina to that of 14 modern and fossil guilds from other continents. We find that sparassodonts had comparatively low ecomorphological disparity throughout their history and that South American carnivore palaeoguilds, as represented by that of Santa Cruz, Argentina, were unlike modern or fossil carnivore guilds of other continents in their lack of mesocarnivores and hypocarnivores. Our results add to a growing body of evidence highlighting non-analogue aspects of extinct South American mammals and illustrate the dramatic effects that historical contingency can have on the evolution of mammalian palaeocommunities. PMID:29298933

  17. Seasonal Changes in Bird Species and Feeding Guilds along Elevational Gradients of the Central Himalayas, Nepal

    Science.gov (United States)

    Katuwal, Hem Bahadur; Basnet, Khadga; Khanal, Bhaiya; Devkota, Shiva; Rai, Sanjeev Kumar; Gajurel, Jyoti Prasad; Scheidegger, Christoph; Nobis, Michael P.

    2016-01-01

    The Himalayas are a global hotspot for bird diversity with a large number of threatened species, but little is known about seasonal changes in bird communities along elevational gradients in this region. We studied the seasonality of bird diversity in six valleys of the Central Himalayas, Nepal. Using 318 plots with a 50 m radius, located from 2200 to 3800 m a.s.l., and repeated sampling during different seasons (mainly pre-monsoon, monsoon, and post-monsoon), we analyzed 3642 occurrences of 178 species. Birds classified in the literature as resident were more species-rich than migratory birds (140 vs. 38 species). In all six valleys and within the studied elevation range, species richness of all birds showed a peak at mid-elevation levels of 2600 or 3000 m a.s.l. Similar patterns were found for the most species-rich feeding guilds of insectivores (96 species) and omnivores (24 species), whereas the species richness of herbivores (37 species including frugivores) increased towards higher elevations. Among these feeding guilds, only species richness of insectivores showed pronounced seasonal changes with higher species numbers during post-monsoon season. Similarly, individual bird species showed distinct spatio-temporal distribution patterns, with transitions from species dominated by elevational differences to those characterized by strong seasonal changes. In an era of climate change, the results demonstrate that individual bird species as well as feeding guilds might greatly differ in their responses to climate warming and changes in the seasonality of the precipitation regime, two aspects of climate change which should not be analyzed independently. PMID:27367903

  18. Dual-guild herbivory disrupts predator-prey interactions in the field.

    Science.gov (United States)

    Blubaugh, Carmen K; Asplund, Jacob S; Eigenbrode, Sanford D; Morra, Matthew J; Philips, Christopher R; Popova, Inna E; Reganold, John P; Snyder, William E

    2018-05-01

    Plant defenses often mediate whether competing chewing and sucking herbivores indirectly benefit or harm one another. Dual-guild herbivory also can muddle plant signals used by specialist natural enemies to locate prey, further complicating the net impact of herbivore-herbivore interactions in naturally diverse settings. While dual-guild herbivore communities are common in nature, consequences for top-down processes are unclear, as chemically mediated tri-trophic interactions are rarely evaluated in field environments. Combining observational and experimental approaches in the open field, we test a prediction that chewing herbivores interfere with top-down suppression of phloem feeders on Brassica oleracea across broad landscapes. In a two-year survey of 52 working farm sites, we found that parasitoid and aphid densities on broccoli plants positively correlated at farms where aphids and caterpillars rarely co-occurred, but this relationship disappeared at farms where caterpillars commonly co-occurred. In a follow-up experiment, we compared single and dual-guild herbivore communities at four local farm sites and found that caterpillars (P. rapae) caused a 30% reduction in aphid parasitism (primarily by Diaeretiella rapae), and increased aphid colony (Brevicoryne brassicae) growth at some sites. Notably, in the absence of predators, caterpillars indirectly suppressed, rather than enhanced, aphid growth. Amid considerable ecological noise, our study reveals a pattern of apparent commensalism: herbivore-herbivore facilitation via relaxed top-down suppression. This work suggests that enemy-mediated apparent commensalism may override constraints to growth induced by competing herbivores in field environments, and emphasizes the value of placing chemically mediated interactions within their broader environmental and community contexts. © 2018 by the Ecological Society of America.

  19. A review of hymenopterous parasitoid guilds attacking Anastrepha spp. and Ceratitis capitata (Diptera: Tephritidae) in Argentina

    Energy Technology Data Exchange (ETDEWEB)

    Ovruski, Sergio M.; Orono, Luis E.; Nunez-Campero, Segundo; Schliserman, Pablo; Albornoz-Medina, Patricia; Bezdjian, Laura P.; Nieuwenhove, Guido A. Van; Martin, Cristina B. [Consejo Nacional de Investigaciones Cientificas y Tecnicas (CONICET), Tucuman (Argentina). Planta Piloto de Procesos Industriales Microbiologicos y Biotecnologia. Div. Control Biologico de Plagas

    2006-07-01

    This study provides detailed information on the diversity, abundance, guilds, host plant and host fly ranges, distribution, and taxonomic status of hymenopterous parasitoid species associated with Ceratitis capitata (Wiedemann) and Anastrepha spp. (A. fraterculus (Wiedemann) and A. schultzi Blanchard) in Argentina. Moreover, the article also argues future needs regarding the use of some parasitoid species as an alternative tool in fruit fly management programs of the National Fruit Fly Control and Eradication Program (PROCEM-Argentina). Data used for this work were obtained from numerous old and recent published articles on fruit fly parasitoids in Argentina. (author)

  20. A review of hymenopterous parasitoid guilds attacking Anastrepha spp. and Ceratitis capitata (Diptera: Tephritidae) in Argentina

    International Nuclear Information System (INIS)

    Ovruski, Sergio M.; Orono, Luis E.; Nunez-Campero, Segundo; Schliserman, Pablo; Albornoz-Medina, Patricia; Bezdjian, Laura P.; Nieuwenhove, Guido A. Van; Martin, Cristina B.

    2006-01-01

    This study provides detailed information on the diversity, abundance, guilds, host plant and host fly ranges, distribution, and taxonomic status of hymenopterous parasitoid species associated with Ceratitis capitata (Wiedemann) and Anastrepha spp. (A. fraterculus (Wiedemann) and A. schultzi Blanchard) in Argentina. Moreover, the article also argues future needs regarding the use of some parasitoid species as an alternative tool in fruit fly management programs of the National Fruit Fly Control and Eradication Program (PROCEM-Argentina). Data used for this work were obtained from numerous old and recent published articles on fruit fly parasitoids in Argentina. (author)

  1. Lighthouse Guild

    Science.gov (United States)

    ... Contact Us About Us Programs & Services Health Plans eLearning Vision + Health Donate Need Help? Show Menu Hide ... Find a health plan Coping with vision loss eLearning Support for parents of children with visual impairments ...

  2. Saproxylic community, guild and species responses to varying pheromone components of a pine bark beetle.

    Science.gov (United States)

    Etxebeste, Iñaki; Lencina, José L; Pajares, Juan

    2013-10-01

    Some bark beetle species (Coleoptera: Scolytinae) produce aggregation pheromones that allow coordinated attack on their conifer hosts. As a new saproxylic habitat is founded, an assemblage of associated beetles kairomonally respond to bark beetle infochemicals. Ips sexdentatus is one of the major damaging insects of Pinus spp. in Southern Europe. Its response to varying ipsenol (Ie) percentages in relation to ipsdienol (Id) was studied in northwestern Spain, along with the entire saproxylic beetle assemblage captured at multiple-funnel traps. Response profile modeling was undertaken for I. sexdentatus sexes and sex-ratios, associated species and for selected trophic groups using a reference Gaussian model. In addition, the effects on the saproxylic assemblages were analyzed. I. sexdentatus response curve peaked at 22.7% Ie content, while remaining taxa that could be modeled, peaked above ca. 40% Ie. Predator guilds showed a linear relationship with Ie proportion, while competitors showed a delayed response peak. Consequently, species assemblages differed markedly between varying pheromone component mixtures. Given that the evaluated pheromonal proportions mimicked that of logs being colonized by I. sexdentatus, results suggested that the registered differential responses at different levels might provide I. sexdentatus with a temporal window that maximizes conspecific attraction while reducing interference with competitor and predatory guilds. Described responses might help improve the monitoring of the population status of target bark beetles and their associates, but also point toward the by-catch of many natural enemies, as well as rare saproxylic beetle species, interfering with the aims of sustainable forest management.

  3. Pollinator guild organization and its consequences for reproduction in three synchronopatric species of Tibouchina (Melastomataceae

    Directory of Open Access Journals (Sweden)

    Ana Maria Franco

    2011-09-01

    Full Text Available Pollinator guild organization and its consequences for reproduction in three synchronopatric species of Tibouchina (Melastomataceae. In co-flowering plant species, pollinator sharing can result in interspecific pollen transfer and fecundity reduction. Competition will be relaxed whenever there is a large amount of initial pollen supply or if each plant species occupies different habitat patches. Reproduction in Tibouchina cerastifolia (Naudin Cogn., T. clinopodifolia (DC. Cogn. and T. gracilis (Bonpl. Cogn. was studied in an area of Atlantic rainforest to examine whether synchronopatry induces time partitioning among pollinator species. Eleven bee species comprised the pollinator guild. Among pollinators, there were overlaps in bee species composition and in flower visitation time. Direct competition for pollen in Tibouchina Aubl. at the study site seems to lead to different activity periods among the bee species, in which Bombus pauloensis Friese,1913 was most active earlier, while the other species were active later in the day. Bombus pauloensis, the largest bee species recorded on Tibouchina flowers, was the most important and efficient pollinator. This species harvested pollen before the other species and had the shortest handling time. The plants reproduced sexually by selfing or outcrossing, and hybridization was not avoided by incompatibility reactions at the style. The avoidance of direct competition for pollen and no pollinator partitioning among the synchronopatric species of Tibouchina may reflect a facilitative interaction among these pioneer plants.

  4. Bt crop effects on functional guilds of non-target arthropods: a meta-analysis.

    Directory of Open Access Journals (Sweden)

    L LaReesa Wolfenbarger

    Full Text Available BACKGROUND: Uncertainty persists over the environmental effects of genetically-engineered crops that produce the insecticidal Cry proteins of Bacillus thuringiensis (Bt. We performed meta-analyses on a modified public database to synthesize current knowledge about the effects of Bt cotton, maize and potato on the abundance and interactions of arthropod non-target functional guilds. METHODOLOGY/PRINCIPAL FINDINGS: We compared the abundance of predators, parasitoids, omnivores, detritivores and herbivores under scenarios in which neither, only the non-Bt crops, or both Bt and non-Bt crops received insecticide treatments. Predators were less abundant in Bt cotton compared to unsprayed non-Bt controls. As expected, fewer specialist parasitoids of the target pest occurred in Bt maize fields compared to unsprayed non-Bt controls, but no significant reduction was detected for other parasitoids. Numbers of predators and herbivores were higher in Bt crops compared to sprayed non-Bt controls, and type of insecticide influenced the magnitude of the difference. Omnivores and detritivores were more abundant in insecticide-treated controls and for the latter guild this was associated with reductions of their predators in sprayed non-Bt maize. No differences in abundance were found when both Bt and non-Bt crops were sprayed. Predator-to-prey ratios were unchanged by either Bt crops or the use of insecticides; ratios were higher in Bt maize relative to the sprayed non-Bt control. CONCLUSIONS/SIGNIFICANCE: Overall, we find no uniform effects of Bt cotton, maize and potato on the functional guilds of non-target arthropods. Use of and type of insecticides influenced the magnitude and direction of effects; insecticde effects were much larger than those of Bt crops. These meta-analyses underscore the importance of using controls not only to isolate the effects of a Bt crop per se but also to reflect the replacement of existing agricultural practices. Results will

  5. Caterpillar assembalges on Chusquea bamboos in southern Ecuador: abundance, guild structure, and the influence of host plant quality

    Czech Academy of Sciences Publication Activity Database

    Seifert, Carlo Lutz; Lehner, L.; Bodner, F.; Fiedler, K.

    2016-01-01

    Roč. 41, č. 6 (2016), s. 698-706 ISSN 0307-6946 Institutional support: RVO:60077344 Keywords : bamboo * feeding guild * Lepidoptera Subject RIV: EH - Ecology, Behaviour Impact factor: 1.771, year: 2016 http://onlinelibrary.wiley.com/doi/10.1111/een.12345/abstract

  6. Root-associated fungal communities along a primary succession on a mine spoil: Distinct ecological guilds assemble differently

    Czech Academy of Sciences Publication Activity Database

    Kolaříková, Zuzana; Kohout, Petr; Krüger, Claudia; Janoušková, Martina; Mrnka, Libor; Rydlová, Jana

    2017-01-01

    Roč. 113, OCT 2017 (2017), s. 143-152 ISSN 0038-0717 R&D Projects: GA ČR GA13-10377S Institutional support: RVO:67985939 Keywords : community composition * ecological guilds * primary succession Subject RIV: EH - Ecology, Behaviour OBOR OECD: Ecology Impact factor: 4.857, year: 2016

  7. The Insect Guild of White Oak Acorns: Its Effect on Mast Quality in the Ozark and Ouachita National Forests

    Science.gov (United States)

    Alex C. Mangini; Roger W. Perry

    2004-01-01

    Abstract - Hardwood regeneration, especially of oaks, is an essential component of ecosystem management in the Ouachita and Ozark Mountains of Arkansas. In addition, oak mast is an important wildlife food. Several species of insects inhabit and consume acorns. Data on the insect guild inhabiting white oak (Quercus alba L.) acorns...

  8. The Ontology of Biological Groups: Do Grasshoppers Form Assemblages, Communities, Guilds, Populations, or Something Else?

    Directory of Open Access Journals (Sweden)

    Jeffrey A. Lockwood

    2011-01-01

    Full Text Available Acridologists have used a variety of terms to describe groups of grasshoppers, including assemblage, community, guild, and population. This terminological diversity has raised the question of whether one of these descriptors is the correct one. I take the position that these terms pick out different features of the natural world such that there is no unconditionally or uniquely correct term. By adopting the framework of constrained perspectivism—a form of philosophical pragmatism—it is argued that a term is correct if it accurately reflects the conceptual framework of the investigator and effectively communicates this perspective to others. Such an approach gives rise to terminological pluralism that avoids the problems of relativism (the subjectivist's view that any term can be used and absolutism (the objectivist's view that there is a single correct term. I describe the contexts in which the most common terms are appropriate.

  9. Intraspecific density dependence and a guild of consumers coexisting on one resource.

    Science.gov (United States)

    McPeek, Mark A

    2012-12-01

    The importance of negative intraspecific density dependence to promoting species coexistence in a community is well accepted. However, such mechanisms are typically omitted from more explicit models of community dynamics. Here I analyze a variation of the Rosenzweig-MacArthur consumer-resource model that includes negative intraspecific density dependence for consumers to explore its effect on the coexistence of multiple consumers feeding on a single resource. This analysis demonstrates that a guild of multiple consumers can easily coexist on a single resource if each limits its own abundance to some degree, and stronger intraspecific density dependence permits a wider variety of consumers to coexist. The mechanism permitting multiple consumers to coexist works in a fashion similar to apparent competition or to each consumer having its own specialized predator. These results argue for a more explicit emphasis on how negative intraspecific density dependence is generated and how these mechanisms combine with species interactions to shape overall community structure.

  10. Tourism in protected areas: Disentangling road and traffic effects on intra-guild scavenging processes.

    Science.gov (United States)

    Donázar, José Antonio; Ceballos, Olga; Cortés-Avizanda, Ainara

    2018-07-15

    The expansion of road networks and the increase in traffic have emerged in recent years as key threats to the conservation of biodiversity. This is particularly concerning in many protected areas because the increase of recreational activities requiring the use of vehicles. Effects of roads and traffic within guild scenarios and ecological processes remain however poorly known. Here we examined how road proximity and traffic intensity influence patterns of resource use in an Old-World avian scavenger guild living in a protected natural park in northern Spain. We experimentally placed 130 carcasses at different distances from a scenic road in the centre of the park. Vehicles were recorded by means of traffic counters which revealed that maximum numbers were reached during weekends and holidays and during the middle hours of the day. Avian scavenger attendance at carcasses was recorded by means of camera-traps. Obligated scavengers, Eurasian griffon (Gyps fulvus) and Egyptian vultures (Neophron percnopterus) were frequently observed (59.4% and 37.7% of the consumed carcasses) together with five other facultative scavenger species. We found that the richness (number of species) and the probability of consumption of the resource were reduced the smaller the distance to the road and in days with higher traffic intensity. The same factors affected the probability of presence of all the scavenger species. Moreover, some of them, notably griffon vultures, showed hourly patterns of carcass attendance suggesting avoidance of maximum traffic levels. Our results highlight that roads and traffic would trigger consequences on the structure and functioning of scavenger food webs, which may be particularly concerning in protected areas with remarkable levels of biodiversity. Future regulations at protected areas should couple both traffic and tourist affluence with wildlife conservation. In this way important ecological processes would be preserved while maintaining a good

  11. A preliminary survey of the practice patterns of United States Guild Certified Feldenkrais PractitionersCM

    Directory of Open Access Journals (Sweden)

    Buchanan Patricia A

    2010-04-01

    Full Text Available Abstract Background The Feldenkrais Method® of somatic education purports to guide people of varying ages and abilities to improve function. Many people choose this method to aid with recovery from injury, manage chronic conditions, or enhance performance even though limited research supporting its safety and effectiveness exists to guide decisions about use and referral. Very little information about practitioner characteristics and practice patterns is publicly available to assist researchers in the design of appropriate safety and effectiveness studies. The purpose of this study was to obtain an initial overview of the characteristics of United States Guild Certified Feldenkrais PractitionersCM. Methods Of 1300 certified Feldenkrais® practitioners at the time of the study, there were 1193 practitioners with email accounts who were sent invitations to complete a web-based survey. The survey inquired about practice locations, additional credentials, service patterns and workloads during the previous 3 months. Response rate and descriptive statistics were calculated. Results The survey had a 32.3% (385/1193 response rate. The top states in which responders practiced were California (n = 92 and New York (n = 44. Most responders did not hold other credentials as traditional health care providers or as complementary and alternative medicine providers. Among those who did, the most common credentials were physical therapist (n = 83 and massage therapist (n = 38. Just over a third of traditional health care providers only provided Feldenkrais lessons, compared to 59.3% of complementary and alternative providers. On average, responders saw 7.6 ± 8.1 (median = 5 clients per week for individual lessons, 8.4 ± 11.5 (median = 5 clients per week for group lessons, and 2.9 ± 3.9 (median = 2 new clients per month for individual lessons. Conclusions This preliminary survey of United States Guild Certified Feldenkrais Practitioners indicated that most

  12. Fishing Nets between Two Seas: Guilds and Ship-Owner Associations in the Atlantic and Mediterranean Fishing Grounds of Andalusia

    Directory of Open Access Journals (Sweden)

    ISIDRO MAYA JARIEGO

    2016-01-01

    Full Text Available This study examines the organizational network of the extractive sector in Andalusian fishing enclaves. For this, we have evaluated 6 types of informal and institutional relationships between a total of 30 guilds and ship-owner associations in 21 Andalusian fi shing ports. The analyzed networks were found to have a core-periphery structure with the guilds playing a central role. The QAP procedure was used to identify two distinct contexts of relationship formation: informal meetings and the government fishing network (corresponding to formal meetings, such as fishing tables, port assemblies and fishing quota negotiations. We verified the existence of significant homophily dynamics based on both fishing ground and organization type.

  13. Breeding Guild Determines Frog Distributions in Response to Edge Effects and Habitat Conversion in the Brazil's Atlantic Forest.

    Directory of Open Access Journals (Sweden)

    Rodrigo B Ferreira

    Full Text Available Understanding the response of species with differing life-history traits to habitat edges and habitat conversion helps predict their likelihood of persistence across changing landscape. In Brazil's Atlantic Forest, we evaluated frog richness and abundance by breeding guild at four distances from the edge of a reserve: i 200 m inside the forest, ii 50 m inside the forest, iii at the forest edge, and iv 50 m inside three different converted habitats (coffee plantation, non-native Eucalyptus plantation, and abandoned pastures, hereafter matrix types. By sampling a dry and a wet season, we recorded 622 individual frogs representing 29 species, of which three were undescribed. Breeding guild (i.e. bromeliad, leaf-litter, and water-body breeders was the most important variable explaining frog distributions in relation to edge effects and matrix types. Leaf-litter and bromeliad breeders decreased in richness and abundance from the forest interior toward the matrix habitats. Water-body breeders increased in richness toward the matrix and remained relatively stable in abundance across distances. Number of large trees (i.e. DBH > 15 cm and bromeliads best explained frog richness and abundance across distances. Twenty species found in the interior of the forest were not found in any matrix habitat. Richness and abundance across breeding guilds were higher in the rainy season but frog distributions were similar across the four distances in the two seasons. Across matrix types, leaf-litter species primarily used Eucalyptus plantations, whereas water-body species primarily used coffee plantations. Bromeliad breeders were not found inside any matrix habitat. Our study highlights the importance of primary forest for bromeliad and leaf-litter breeders. We propose that water-body breeders use edge and matrix habitats to reach breeding habitats along the valleys. Including life-history characteristics, such as breeding guild, can improve predictions of frog

  14. Breeding Guild Determines Frog Distributions in Response to Edge Effects and Habitat Conversion in the Brazil's Atlantic Forest.

    Science.gov (United States)

    Ferreira, Rodrigo B; Beard, Karen H; Crump, Martha L

    2016-01-01

    Understanding the response of species with differing life-history traits to habitat edges and habitat conversion helps predict their likelihood of persistence across changing landscape. In Brazil's Atlantic Forest, we evaluated frog richness and abundance by breeding guild at four distances from the edge of a reserve: i) 200 m inside the forest, ii) 50 m inside the forest, iii) at the forest edge, and iv) 50 m inside three different converted habitats (coffee plantation, non-native Eucalyptus plantation, and abandoned pastures, hereafter matrix types). By sampling a dry and a wet season, we recorded 622 individual frogs representing 29 species, of which three were undescribed. Breeding guild (i.e. bromeliad, leaf-litter, and water-body breeders) was the most important variable explaining frog distributions in relation to edge effects and matrix types. Leaf-litter and bromeliad breeders decreased in richness and abundance from the forest interior toward the matrix habitats. Water-body breeders increased in richness toward the matrix and remained relatively stable in abundance across distances. Number of large trees (i.e. DBH > 15 cm) and bromeliads best explained frog richness and abundance across distances. Twenty species found in the interior of the forest were not found in any matrix habitat. Richness and abundance across breeding guilds were higher in the rainy season but frog distributions were similar across the four distances in the two seasons. Across matrix types, leaf-litter species primarily used Eucalyptus plantations, whereas water-body species primarily used coffee plantations. Bromeliad breeders were not found inside any matrix habitat. Our study highlights the importance of primary forest for bromeliad and leaf-litter breeders. We propose that water-body breeders use edge and matrix habitats to reach breeding habitats along the valleys. Including life-history characteristics, such as breeding guild, can improve predictions of frog distributions in

  15. Mercury bioaccumulation and risk to three waterbird foraging guilds is influenced by foraging ecology and breeding stage

    International Nuclear Information System (INIS)

    Eagles-Smith, Collin A.; Ackerman, Joshua T.; De La Cruz, Susan E.W.; Takekawa, John Y.

    2009-01-01

    We evaluated mercury (Hg) in five waterbird species representing three foraging guilds in San Francisco Bay, CA. Fish-eating birds (Forster's and Caspian terns) had the highest Hg concentrations in thier tissues, but concentrations in an invertebrate-foraging shorebird (black-necked stilt) were also elevated. Foraging habitat was important for Hg exposure as illustrated by within-guild differences, where species more associated with marshes and salt ponds had higher concentrations than those more associated with open-bay and tidal mudflats. Importantly, Hg concentrations increased with time spent in the estuary. Surf scoter concentrations tripled over six months, whereas Forster's terns showed an up to 5-fold increase between estuary arrival and breeding. Breeding waterbirds were at elevated risk of Hg-induced reproductive impairment, particularly Forster's terns, in which 48% of breeding birds were at high risk due to their Hg levels. Our results highlight the importance of habitat and exposure timing, in addition to trophic position, on waterbird Hg bioaccumulation and risk. - The influence of foraging habitat, trophic position, and exposure timing on mercury bioaccumulation and risk to reproduction is evaluated in three waterbird guilds.

  16. Fungal Communities and Functional Guilds Shift Along an Elevational Gradient in the Southern Appalachian Mountains.

    Science.gov (United States)

    Veach, Allison M; Stokes, C Elizabeth; Knoepp, Jennifer; Jumpponen, Ari; Baird, Richard

    2017-12-04

    Nitrogen deposition alters forest ecosystems particularly in high elevation, montane habitats where nitrogen deposition is greatest and continues to increase. We collected soils across an elevational (788-1940 m) gradient, encompassing both abiotic (soil chemistry) and biotic (vegetation community) gradients, at eight locations in the southern Appalachian Mountains of southwestern North Carolina and eastern Tennessee. We measured soil chemistry (total N, C, extractable PO 4 , soil pH, cation exchange capacity [ECEC], percent base saturation [% BS]) and dissected soil fungal communities using ITS2 metabarcode Illumina MiSeq sequencing. Total soil N, C, PO 4 , % BS, and pH increased with elevation and plateaued at approximately 1400 m, whereas ECEC linearly increased and C/N decreased with elevation. Fungal communities differed among locations and were correlated with all chemical variables, except PO 4 , whereas OTU richness increased with total N. Several ecological guilds (i.e., ectomycorrhizae, saprotrophs, plant pathogens) differed in abundance among locations; specifically, saprotroph abundance, primarily attributable to genus Mortierella, was positively correlated with elevation. Ectomycorrhizae declined with total N and soil pH and increased with total C and PO 4 where plant pathogens increased with total N and decreased with total C. Our results demonstrate significant turnover in taxonomic and functional fungal groups across elevational gradients which facilitate future predictions on forest ecosystem change in the southern Appalachians as nitrogen deposition rates increase and regional temperature and precipitation regimes shift.

  17. Interactive effects of climate and nutrient enrichment on patterns of herbivory by different feeding guilds in mangrove forests

    KAUST Repository

    Feller, Ilka C.

    2017-09-28

    Aim Global warming and eutrophication are major threats to coastal environments worldwide. As a result of differences between temperate and tropical ecosystems in nutrient availability, nitrogen (N):phosphorus (P) coupling and carbon retention, primary productivity and biotic interactions in the tropics are predicted to have stronger responses to increased nutrients than in temperate ecosystems. Habitats that occur across broad climatic ranges, such as mangrove forests, provide an opportunity to test this hypothesis by investigating the responses of herbivores to nutrient enrichment in temperate versus tropical latitudes on the same species. Location Australia and New Zealand. Time period Fertilization experiments were established at Port Douglas and Cape Cleveland in October 2000; Batemans Bay and Waikopua in August 2001; Whangapoua in January 2003; Tinchi Tamba in September 2005; and Garalia in October 2007. Herbivory was measured in 2009. Major taxa studied Insect leaf miners; insect and fungal leaf gallers. Methods We used seven fertilization experiments in Australia and New Zealand across 20° of latitude to determine how increased nutrients affected herbivory and diversity of leaf miners and gallers of the mangrove Avicennia marina. Individual trees were fertilized annually with one of three treatments (Control, +N, +P); herbivory was measured in 2009. Results Fertilization did not significantly affect herbivory or herbivore diversity. Leaf N:P, latitude and rainfall contributed significantly to herbivory, accounting for > 56% of the variation. Latitude, temperature, %P and salinity differentiated herbivory by feeding guild in the tropical versus subtropical and temperate latitudes. The effect of N fertilization on folivory differed across climatic regions; relative to Control trees, N-fertilized trees in temperate areas had greater folivory than in tropical and subtropical latitudes. Species richness for leaf miners and gallers was correlated with latitude

  18. Theory, methods and tools for determining environmental flows for riparian vegetation: Riparian vegetation-flow response guilds

    Science.gov (United States)

    Merritt, D.M.; Scott, M.L.; Leroy, Poff N.; Auble, G.T.; Lytle, D.A.

    2010-01-01

    Riparian vegetation composition, structure and abundance are governed to a large degree by river flow regime and flow-mediated fluvial processes. Streamflow regime exerts selective pressures on riparian vegetation, resulting in adaptations (trait syndromes) to specific flow attributes. Widespread modification of flow regimes by humans has resulted in extensive alteration of riparian vegetation communities. Some of the negative effects of altered flow regimes on vegetation may be reversed by restoring components of the natural flow regime. 2. Models have been developed that quantitatively relate components of the flow regime to attributes of riparian vegetation at the individual, population and community levels. Predictive models range from simple statistical relationships, to more complex stochastic matrix population models and dynamic simulation models. Of the dozens of predictive models reviewed here, most treat one or a few species, have many simplifying assumptions such as stable channel form, and do not specify the time-scale of response. In many cases, these models are very effective in developing alternative streamflow management plans for specific river reaches or segments but are not directly transferable to other rivers or other regions. 3. A primary goal in riparian ecology is to develop general frameworks for prediction of vegetation response to changing environmental conditions. The development of riparian vegetation-flow response guilds offers a framework for transferring information from rivers where flow standards have been developed to maintain desirable vegetation attributes, to rivers with little or no existing information. 4. We propose to organise riparian plants into non-phylogenetic groupings of species with shared traits that are related to components of hydrologic regime: life history, reproductive strategy, morphology, adaptations to fluvial disturbance and adaptations to water availability. Plants from any river or region may be grouped

  19. Pollinator guild organization and its consequences for reproduction in three synchronopatric species of Tibouchina (Melastomataceae

    Directory of Open Access Journals (Sweden)

    Ana Maria Franco

    2011-09-01

    Full Text Available Pollinator guild organization and its consequences for reproduction in three synchronopatric species of Tibouchina (Melastomataceae. In co-flowering plant species, pollinator sharing can result in interspecific pollen transfer and fecundity reduction. Competition will be relaxed whenever there is a large amount of initial pollen supply or if each plant species occupies different habitat patches. Reproduction in Tibouchina cerastifolia (Naudin Cogn., T. clinopodifolia (DC. Cogn. and T. gracilis (Bonpl. Cogn. was studied in an area of Atlantic rainforest to examine whether synchronopatry induces time partitioning among pollinator species. Eleven bee species comprised the pollinator guild. Among pollinators, there were overlaps in bee species composition and in flower visitation time. Direct competition for pollen in Tibouchina Aubl. at the study site seems to lead to different activity periods among the bee species, in which Bombus pauloensis Friese,1913 was most active earlier, while the other species were active later in the day. Bombus pauloensis, the largest bee species recorded on Tibouchina flowers, was the most important and efficient pollinator. This species harvested pollen before the other species and had the shortest handling time. The plants reproduced sexually by selfing or outcrossing, and hybridization was not avoided by incompatibility reactions at the style. The avoidance of direct competition for pollen and no pollinator partitioning among the synchronopatric species of Tibouchina may reflect a facilitative interaction among these pioneer plants.Organização da guilda de polinizadores e sua consequência para reprodução em três espécies sincropátricas de Tibouchina (Melastomataceae. Em espécies de plantas que co-florescem, a partilha de polinizadores pode resultar em transferência interespecífica de pólen e redução da fecundidade. A competição pode ser relaxada quando existe uma grande quantidade de suprimento de p

  20. Composition, diversity and foraging guilds of avifauna in a suburban area of southern West Bengal, India

    Directory of Open Access Journals (Sweden)

    Mukhopadhyay Shiladitya

    2017-12-01

    Full Text Available Avian communities are very good indicators of any ecosystem. Despite the alarming consequences of rapid urbanization, studies of avian diversity in the human-dominated landscapes of India are very few. Therefore, we studied the avian assemblage of Bongaon in southern West Bengal, India, a suburban area whose avifauna has thus far remained undocumented. Bird surveys were carried out from June 2015 to May 2016, following the fixed-radius (25 m point count method together with opportunistic observations. We recorded 119 avian species belonging to 53 families. Ardeidae was the most diverse avian family in the study area (RDi value = 5.882. Among the recorded avifauna, 89 species were resident, 26 species were winter visitors, three species were summer visitors, and one species was a passage migrant. Species richness of the resident and passage migrant species did not vary seasonally, while the winter and summer visitors displayed significant seasonal variation. In this suburban area, the species richness of feeding guilds varied significantly. Most birds were insectivorous (41.2%, followed by carnivorous (24.4%, omnivorous (18.5%, granivorous (7.6%, frugivorous (3.4%, nectarivorous (3.4% and herbivorous species (1.7%. Maximum species richness was recorded in November and minimum species richness in July. Black-headed Ibis Threskiornis melanocephalus and Alexandrine Parakeet Psittacula eupatria are two near-threatened species found in this region. Interestingly, six species having a globally declining trend are still very common in the study area. Long-term studies are required to monitor any change in the avian communities of this suburban landscape resulting from urbanization.

  1. Spatiotemporal diversity, structure and trophic guilds of insect assemblages in a semi-arid Sabkha ecosystem

    Directory of Open Access Journals (Sweden)

    Haroun Chenchouni

    2015-03-01

    Full Text Available The current study highlights some knowledge on the diversity and structure of insect communities and trophic groups living in Sabkha Djendli (semi-arid area of Northeastern Algeria. The entomofauna was monthly sampled from March to November 2006 using pitfall traps at eight sites located at the vicinity of the Sabkha. Structural and diversity parameters (species richness, Shannon index, evenness were measured for both insect orders and trophic guilds. The canonical correspondence analysis (CCA was applied to determine how vegetation parameters (species richness and cover influence spatial and seasonal fluctuations of insect assemblages. The catches totalled 434 insect individuals classified into 75 species, 62 genera, 31 families and 7 orders, of which Coleoptera and Hymenoptera were the most abundant and constant over seasons and study stations. Spring and autumn presented the highest values of diversity parameters. Individual-based Chao-1 species richness estimator indicated 126 species for the total individuals captured in the Sabkha. Based on catch abundances, the structure of functional trophic groups was predators (37.3%, saprophages (26.7%, phytophages (20.5%, polyphages (10.8%, coprophages (4.6%; whereas in terms of numbers of species, they can be classified as phytophages (40%, predators (25.3%, polyphages (13.3%, saprophages (12%, coprophages (9.3%. The CCA demonstrated that phytophages and saprophages as well as Coleoptera and Orthoptera were positively correlated with the two parameters of vegetation, especially in spring and summer. While the abundance of coprophages was positively correlated with species richness of plants, polyphage density was positively associated with vegetation cover. The insect community showed high taxonomic and functional diversity that is closely related to diversity and vegetation cover in different stations of the wetland and seasons.

  2. Mesopredator release by an emergent superpredator: a natural experiment of predation in a three level guild.

    Directory of Open Access Journals (Sweden)

    Nayden Chakarov

    Full Text Available BACKGROUND: Intraguild predation (IGP is widespread but it is often neglected that guilds commonly include many layers of dominance within. This could obscure the effects of IGP making unclear whether the intermediate or the bottom mesopredator will bear higher costs from the emergence of a new top predator. METHODOLOGY/PRINCIPAL FINDINGS: In one of the most extensive datasets of avian IGP, we analyse the impact of recolonization of a superpredator, the eagle owl Bubo bubo on breeding success, territorial dynamics and population densities of two mesopredators, the northern goshawk Accipiter gentilis and its IG prey, the common buzzard Buteo buteo. The data covers more than two decades and encompass three adjacent plots. Eagle owls only recolonized the central plot during the second decade, thereby providing a natural experiment. Both species showed a decrease in standardized reproductive success and an increase in brood failure within 1.5 km of the superpredator. During the second decade, territory dynamics of goshawks was significantly higher in the central plot compared to both other plots. No such pattern existed in buzzards. Goshawk density in the second decade decreased in the central plot, while it increased in both other plots. Buzzard density in the second decade rapidly increased in the north, remained unchanged in the south and increased moderately in the center in a probable case of mesopredator release. CONCLUSIONS/SIGNIFICANCE: Our study finds support for top-down control on the intermediate mesopredator and both top-down and bottom-up control of the bottom mesopredator. In the face of considerable costs of IGP, both species probably compete to breed in predator-free refugia, which get mostly occupied by the dominant raptor. Therefore for mesopredators the outcome of IGP might depend directly on the number of dominance levels which supersede them.

  3. Nutrient Dynamics of Estuarine Invertebrates Are Shaped by Feeding Guild Rather than Seasonal River Flow.

    Directory of Open Access Journals (Sweden)

    Kelly Ortega-Cisneros

    Full Text Available This study aimed to determine the variability of carbon and nitrogen elemental content, stoichiometry and diet proportions of invertebrates in two sub-tropical estuaries in South Africa experiencing seasonal changes in rainfall and river inflow. The elemental ratios and stable isotopes of abiotic sources, zooplankton and macrozoobenthos taxa were analyzed over a dry/wet seasonal cycle. Nutrient content (C, N and stoichiometry of suspended particulate matter exhibited significant spatio-temporal variations in both estuaries, which were explained by the variability in river inflow. Sediment particulate matter (%C, %N and C:N was also influenced by the variability in river flow but to a lesser extent. The nutrient content and ratios of the analyzed invertebrates did not significantly vary among seasons with the exception of the copepod Pseudodiaptomus spp. (C:N and the tanaid Apseudes digitalis (%N, C:N. These changes did not track the seasonal variations of the suspended or sediment particulate matter. Our results suggest that invertebrates managed to maintain their stoichiometry independent of the seasonality in river flow. A significant variability in nitrogen content among estuarine invertebrates was recorded, with highest % N recorded from predators and lowest %N from detritivores. Due to the otherwise general lack of seasonal differences in elemental content and stoichiometry, feeding guild was a major factor shaping the nutrient dynamics of the estuarine invertebrates. The nutrient richer suspended particulate matter was the preferred food source over sediment particulate matter for most invertebrate consumers in many, but not all seasons. The most distinct preference for suspended POM as a food source was apparent from the temporarily open/closed system after the estuary had breached, highlighting the importance of river flow as a driver of invertebrate nutrient dynamics under extreme events conditions. Moreover, our data showed that

  4. Nutrient Dynamics of Estuarine Invertebrates Are Shaped by Feeding Guild Rather than Seasonal River Flow.

    Science.gov (United States)

    Ortega-Cisneros, Kelly; Scharler, Ursula M

    2015-01-01

    This study aimed to determine the variability of carbon and nitrogen elemental content, stoichiometry and diet proportions of invertebrates in two sub-tropical estuaries in South Africa experiencing seasonal changes in rainfall and river inflow. The elemental ratios and stable isotopes of abiotic sources, zooplankton and macrozoobenthos taxa were analyzed over a dry/wet seasonal cycle. Nutrient content (C, N) and stoichiometry of suspended particulate matter exhibited significant spatio-temporal variations in both estuaries, which were explained by the variability in river inflow. Sediment particulate matter (%C, %N and C:N) was also influenced by the variability in river flow but to a lesser extent. The nutrient content and ratios of the analyzed invertebrates did not significantly vary among seasons with the exception of the copepod Pseudodiaptomus spp. (C:N) and the tanaid Apseudes digitalis (%N, C:N). These changes did not track the seasonal variations of the suspended or sediment particulate matter. Our results suggest that invertebrates managed to maintain their stoichiometry independent of the seasonality in river flow. A significant variability in nitrogen content among estuarine invertebrates was recorded, with highest % N recorded from predators and lowest %N from detritivores. Due to the otherwise general lack of seasonal differences in elemental content and stoichiometry, feeding guild was a major factor shaping the nutrient dynamics of the estuarine invertebrates. The nutrient richer suspended particulate matter was the preferred food source over sediment particulate matter for most invertebrate consumers in many, but not all seasons. The most distinct preference for suspended POM as a food source was apparent from the temporarily open/closed system after the estuary had breached, highlighting the importance of river flow as a driver of invertebrate nutrient dynamics under extreme events conditions. Moreover, our data showed that estuarine

  5. Evaluating random search strategies in three mammals from distinct feeding guilds.

    Science.gov (United States)

    Auger-Méthé, Marie; Derocher, Andrew E; DeMars, Craig A; Plank, Michael J; Codling, Edward A; Lewis, Mark A

    2016-09-01

    Searching allows animals to find food, mates, shelter and other resources essential for survival and reproduction and is thus among the most important activities performed by animals. Theory predicts that animals will use random search strategies in highly variable and unpredictable environments. Two prominent models have been suggested for animals searching in sparse and heterogeneous environments: (i) the Lévy walk and (ii) the composite correlated random walk (CCRW) and its associated area-restricted search behaviour. Until recently, it was difficult to differentiate between the movement patterns of these two strategies. Using a new method that assesses whether movement patterns are consistent with these two strategies and two other common random search strategies, we investigated the movement behaviour of three species inhabiting sparse northern environments: woodland caribou (Rangifer tarandus caribou), barren-ground grizzly bear (Ursus arctos) and polar bear (Ursus maritimus). These three species vary widely in their diets and thus allow us to contrast the movement patterns of animals from different feeding guilds. Our results showed that although more traditional methods would have found evidence for the Lévy walk for some individuals, a comparison of the Lévy walk to CCRWs showed stronger support for the latter. While a CCRW was the best model for most individuals, there was a range of support for its absolute fit. A CCRW was sufficient to explain the movement of nearly half of herbivorous caribou and a quarter of omnivorous grizzly bears, but was insufficient to explain the movement of all carnivorous polar bears. Strong evidence for CCRW movement patterns suggests that many individuals may use a multiphasic movement strategy rather than one-behaviour strategies such as the Lévy walk. The fact that the best model was insufficient to describe the movement paths of many individuals suggests that some animals living in sparse environments may use

  6. Impact of change in winter strategy of one parasitoid species on the diversity and function of a guild of parasitoids.

    Science.gov (United States)

    Andrade, Thiago Oliveira; Krespi, Liliane; Bonnardot, Valérie; van Baaren, Joan; Outreman, Yannick

    2016-03-01

    The rise of temperatures may enable species to increase their activities during winter periods and to occupy new areas. In winter, resource density is low for most species and an increased number of active consumers during this season may produce heightened competitive pressure. In Western France, the aphid parasitoid species Aphidius avenae Haliday has been known to adopt a winter diapausing strategy adjacent to newly sown cereal crops, until recent reports of active winter populations in cereal crops. We investigate how the addition of this species to the winter guild of parasitoids may change the structure of the aphid-parasitoid food web and the host-exploitation strategies of previously occurring parasitoids. We showed that in winter, Aphidius avenae was mostly associated with two aphid species, Sitobion avenae Fabricius and Metopolophium dirhodum Walker, while the generalist species Aphidius rhopalosiphi was restricted to the aphid species Rhopalosiphum padi L. in the presence of Aphidius avenae. Due to this new competition, winter food webs present a higher degree of compartmentalization and lower proportional similarity index values than spring ones. Parasitoid and aphid abundances responded significantly to changes in daily high temperatures, suggesting that the host-parasitoid community structure can be partly predicted by climate. This study demonstrates how a change in the winter strategy of one species of a guild can modify complex interspecific relationships in host-parasitoid systems.

  7. An insect-feeding guild of carnivorous plants and spiders: does optimal foraging lead to competition or facilitation?

    Science.gov (United States)

    Crowley, Philip H; Hopper, Kevin R; Krupa, James J

    2013-12-01

    Carnivorous plants and spiders, along with their prey, are main players in an insect-feeding guild found on acidic, poorly drained soils in disturbed habitat. Darwin's notion that these plants must actively attract the insects they capture raises the possibility that spiders could benefit from proximity to prey hotspots created by the plants. Alternatively, carnivorous plants and spiders may deplete prey locally or (through insect redistribution) more widely, reducing each other's gain rates from predation. Here, we formulate and analyze a model of this guild, parameterized for carnivorous sundews and lycosid spiders, under assumptions of random movement by insects and optimal foraging by predators. Optimal foraging here involves gain maximization via trap investment (optimal web sizes and sundew trichome densities) and an ideal free distribution of spiders between areas with and without sundews. We find no facilitation: spiders and sundews engage in intense exploitation competition. Insect attraction by plants modestly increases sundew gain rates but slightly decreases spider gain rates. In the absence of population size structure, optimal spider redistribution between areas with and without sundews yields web sizes that are identical for all spiders, regardless of proximity to sundews. Web-building spiders have higher gain rates than wandering spiders in this system at high insect densities, but wandering spiders have the advantage at low insect densities. Results are complex, indicating that predictions to be tested empirically must be based on careful quantitative assessment.

  8. Molecular analysis of the gut contents of Harmonia axyridis (Coleoptera: Coccinellidae) as a method for detecting intra-guild predation by this species on aphidophagous predators other than coccinellids

    NARCIS (Netherlands)

    Ingels, B.; Aebi, A.; Hautier, L.; Van Leeuwen, T.; De Clercq, P.

    2013-01-01

    Several studies have demonstrated that the invasive ladybird Harmonia axyridis is a strong intra-guild predator of native species of ladybird. Laboratory studies have shown that H. axyridis can be an intra-guild predator of aphid predators other than coccinellids, including the hoverfly Episyrphus

  9. Avian diversity and feeding guilds in a secondary forest, an oil palm plantation and a paddy field in riparian areas of the kerian river basin, perak, malaysia.

    Science.gov (United States)

    Azman, Nur Munira; Latip, Nurul Salmi Abdul; Sah, Shahrul Anuar Mohd; Akil, Mohd Abdul Muin Md; Shafie, Nur Juliani; Khairuddin, Nurul Liyana

    2011-12-01

    The diversity and the feeding guilds of birds in three different habitats (secondary forest, oil palm plantation and paddy field) were investigated in riparian areas of the Kerian River Basin (KRB), Perak, Malaysia. Point-count observation and mist-netting methods were used to determine bird diversity and abundance. A total of 132 species of birds from 46 families were recorded in the 3 habitats. Species diversity, measured by Shannon's diversity index, was 3.561, 3.183 and 1.042 in the secondary forest, the paddy field and the oil palm plantation, respectively. The vegetation diversity and the habitat structure were important determinants of the number of bird species occurring in an area. The relative abundance of the insectivore, insectivore-frugivore and frugivore guilds was greater in the forest than in the monoculture plantation. In contrast, the relative abundance of the carnivore, granivore and omnivore guilds was higher in the plantation. The results of the study show that the conversion of forest to either oil palm plantation or paddy fields produced a decline in bird diversity and changes in the distribution of bird feeding guilds.

  10. Adaptive morphologies and guild structure in a high-diversity bivalve fauna from an early Campanian rocky shore, Ivö Klack (Sweden)

    DEFF Research Database (Denmark)

    Sørensen, Anne Mehlin; Surlyk, Finn; Jagt, John W. M.

    2012-01-01

    habitats. Study of the functional morphology of bivalve shells and comparison with extant relatives has resulted in a subdivision of the fauna into seven guilds and five habitats. The bivalve fauna represents a withinhabitat, time-averaged assemblage to which none of the species was introduced from...

  11. Local adaptation of Ruellia nudiflora (Acanthaceae) to biotic counterparts: complex scenarios revealed when two herbivore guilds are considered.

    Science.gov (United States)

    Ortegón-Campos, I; Parra-Tabla, V; Abdala-Roberts, L; Herrera, C M

    2009-11-01

    This study evaluated whether the herb Ruellia nudiflora is locally adapted to a specialist insect seed predator (SP) and insect folivores, and if plant local adaptation (LA) to the former is more likely. A reciprocal transplant experiment was conducted using three sites in Yucatan (Mexico) (n = 864 plants). A third of the plants of each origin were placed at each site, and we recorded the following during a 9-month period: fruit number, leaf damage, and fruits attacked by SP. Results indicated lack of plant LA for all the variables measured. Instead, seed predation was c. 100% greater for native plants at one study site, suggesting insect LA or plant maladaptation; folivory was homogeneous across sites/origins. Based on these results, we discuss differences in the potential each herbivore guild has to promote plant LA, as well as divergent evolutionary outcomes of plant-herbivore interactions across sites.

  12. Guild-specific patterns of species richness and host specialization in plant-herbivore food webs from a tropical forest

    Czech Academy of Sciences Publication Activity Database

    Novotný, Vojtěch; Miller, S. E.; Baje, L.; Balagawi, S.; Basset, Y.; Čížek, Lukáš; Craft, K. J.; Dem, F.; Drew, R. A. I.; Hulcr, J.; Lepš, Jan; Lewis, O. T.; Pokon, R.; Stewart, A. J. A.; Samuelson, G. A.; Weiblen, G. D.

    2010-01-01

    Roč. 79, č. 6 (2010), s. 1193-1203 ISSN 0021-8790 R&D Projects: GA ČR GA206/09/0115; GA ČR GD206/08/H044; GA ČR GAP505/10/0673; GA AV ČR IAA600960712; GA MŠk LC06073; GA MŠk ME09082 Grant - others:National Science Foundation(US) DEB 9628840; National Science Foundation(US) DEB 9707928; National Science Foundation(US) DEB 0211591 Institutional research plan: CEZ:AV0Z50070508 Keywords : apparent competition * effective specialization * herbivorous guild Subject RIV: EH - Ecology, Behaviour Impact factor: 4.457, year: 2010

  13. Temporal variability (1997-2015) of trophic fish guilds and its relationships with El Niño events in a subtropical estuary

    Science.gov (United States)

    Possamai, Bianca; Vieira, João P.; Grimm, Alice M.; Garcia, Alexandre M.

    2018-03-01

    Global climatic phenomena like El Niño events are known to alter hydrological cycles and local abiotic conditions leading to changes in structure and dynamics of terrestrial and aquatic biological communities worldwide. Based on a long-term (19 years) standardized sampling of shallow water estuarine fishes, this study investigated the temporal variability in composition and dominance patterns of trophic guilds in a subtropical estuary (Patos Lagoon estuary, Southern Brazil) and their relationship with local and regional driving forces associated with moderate (2002-2003 and 2009-2010) and very strong (1997-1998 and 2015-2016) El Niño events. Fish species were classified into eight trophic guilds (DTV detritivore, HVP herbivore-phytoplankton, HVM macroalgae herbivore, ISV insectivore, OMN omnivore, PSV piscivore, ZBV zoobenthivore and ZPL zooplanktivore) and their abundances were correlated with environmental factors. Canonical correspondence analysis revealed that less dominant (those comprising water transparency occurring mostly during non-El Niño conditions. In contrast, ZBV's abundance was not correlated with contrasting environmental conditions, but rather, had higher association with samples characterized by intermediate environmental values. Overall, these findings show that moderate and very strong El Niño events did not substantially disrupt the dominance patterns among trophic fish guilds in the estuary. Rather, they increased trophic estuarine diversity by flushing freshwater fishes with distinct feeding habits into the estuary.

  14. Composition of functional ecological guilds of the fish fauna of the internal sector of the Amazon Estuary, Pará, Brazil.

    Science.gov (United States)

    Mourão, Keila R M; Ferreira, Valdimere; Lucena-Frédou, Flávia

    2014-12-01

    The present study describes the spatial and temporal structure of the estuarine fish community in the internal sector of the Amazon Estuary. Samples were obtained in the main channels and tidal creeks of Guajará and Marajó Bays and Guamá River. A total of 41,516 fish specimens were collected, representing 136 taxa, 38 families and 12 orders. In the dry season, the mean salinity of the main channel increased along a limnic-marine gradient, between the Guamá River and the Marajó Bay. Species richness was lowest in the mouth of the Guamá River and in the right margin of the Guajará Bay. Fish species composition and environmental guilds differed markedly among areas: Migrants and Freshwater Stragglers were dominant in the Guamá River and the Guajará Bay, while Estuarine, Marine Stragglers and Migrants predominated in the Marajó Bay. However, the trophic guilds were still relatively well balanced, in functional terms. Piscivores and Zoobenthivores were the dominant feeding functional groups in all the studied areas. In this study, the assessment of the community and the use of the guild approach were efficient to describe the structure and functioning of the assemblages of estuarine fish also helping to assess the anthropogenic pressures in the area.

  15. Proceedings: Conference on Applications of the Guild Concept to Environmental Management

    Science.gov (United States)

    1986-02-01

    econometric models with several major metrics being included (CNP, industrial production, wages, etc.), include its broad ecological foundations. Ecologists...expectation from total Low High High Equal ’ Table 6. Variability in populations of birds in forest at Limbo Camp, Parque Nacional Soberania, Panama over... industry , universities, and private conservation groups (Cushwa, et al., 1980). Interim methods that were developed, evaluated, and revised, ultimately

  16. Influence of landscape structure on the functional groups of an aphidophagous guild: Active-searching predators, furtive predators and parasitoids

    Directory of Open Access Journals (Sweden)

    Julie-Éléonore Maisonhaute

    2011-12-01

    Full Text Available A lot of studies focusing on the effect of agricultural landscapes demonstrate that many arthropod species are influenced by landscape structure. In particular, non–crop areas and landscape diversity are often associated with a higher abundance and diversity of natural enemies in fields. Numerous studies focused on the influence of landscape structure on ground beetles, spiders and ladybeetles but few on other natural enemies or different functional groups. Thus, the objective of the present study was to determine the influence of landscape structure on the functional groups, i.e., active-searching predators, furtive predators and parasitoids of aphidophagous guilds. Natural enemies were sampled on milkweed infested with aphids, growing along the borders of ditches adjacent to cornfields. The sampling occurred weekly from June to September in 2006 and 2007, in the region of Lanaudičre (Quebec, Canada. The landscapes within a radius 200 and 500 m around each site were analyzed. The abundance, richness and species composition (based on functional groups of natural enemies were related to landscape structure. The results indicated that landscape structure explained up to 21.6% of the variation in natural enemy assemblage and confirm the positive effects of non-crop areas and landscape diversity. A lower influence of landscape structure on species composition was observed (6.4 to 8.8% and varied greatly among the functional groups. Coccinellidae and furtive predators were the group most influenced by landscape structure. In conclusion, the influence of landscape varied greatly among the different species of the same functional group.

  17. Prey distribution, physical habitat features, and guild traits interact to produce contrasting shorebird assemblages among foraging patches.

    Directory of Open Access Journals (Sweden)

    Beth M VanDusen

    Full Text Available Worldwide declines in shorebird populations, driven largely by habitat loss and degradation, motivate environmental managers to preserve and restore the critical coastal habitats on which these birds depend. Effective habitat management requires an understanding of the factors that determine habitat use and value to shorebirds, extending from individuals to the entire community. While investigating the factors that influenced shorebird foraging distributions among neighboring intertidal sand flats, we built upon species-level understandings of individual-based, small-scale foraging decisions to develop more comprehensive guild- and community-level insights. We found that densities and community composition of foraging shorebirds varied substantially among elevations within some tidal flats and among five flats despite their proximity (all located within a 400-m stretch of natural, unmodified inlet shoreline. Non-dimensional multivariate analyses revealed that the changing composition of the shorebird community among flats and tidal elevations correlated significantly (ρ(s = 0.56 with the spatial structure of the benthic invertebrate prey community. Sediment grain-sizes affected shorebird community spatial patterns indirectly by influencing benthic macroinvertebrate community compositions. Furthermore, combining sediment and macroinvertebrate information produced a 27% increase in correlation (ρ(s = 0.71 with shorebird assemblage patterns over the correlation of the bird community with the macroinvertebrate community alone. Beyond its indirect effects acting through prey distributions, granulometry of the flats influenced shorebird foraging directly by modifying prey availability. Our study highlights the importance of habitat heterogeneity, showing that no single patch type was ideal for the entire shorebird community. Generally, shorebird density and diversity were greatest at lower elevations on flats when they became exposed; these

  18. Structural analysis of the phytophagous insect guilds associated with the roots of Centaurea maculosa Lam. C. diffusa Lam., and C. vallesiaca Jordan in Europe: : I. Field observations.

    Science.gov (United States)

    Müller, Heinz

    1989-01-01

    During extensive field surveys in central and eastern Europe, 21 herbivorous root insect species were found on Centaurea maculosa ssp. rhenana Boreau, 12 species on C. diffusa Lam. and 11 species on C. vallesiaca Jordan, representing 12 families in 4 orders. The large geographic distribution (species-area function), the high number of Centaurea spp. present (host speciation rate), and the high apparency of the rosettes and the rich food resources offered by the roots during winter, together with their poor accessibility, correlate with the high number of specialist feeders associated with the roots of C. maculosa and C. diffusa. The members of the taxonomically diverse root entomofauna exploit specific structures of the tap root (food niches). Interspecific competition among members of food niches, as well as species-specific responses to different phenological stages (for oviposition) and tissues (for larval development) are thought to be responsible for the high predictability in guild structure. The relatively low levels of host plant attack (two thirds of the roots were unattacked) and the fact that food niches remained unoccupied in most of the regions suggest, however, that the majority of the studied guilds do not represent equilibrium assemblages. Ecological (different habitats), climatic (transitional zone) and historical (ancient pre-Pleistocene communities) factors could account for the highest values of species diversity, infestation levels, species packing and food niche utilization, which are found on C. maculosa in E. Austria/NW. Hungary, compared to other regions. A positive correlation between species packing (number of root-feeding species per population) and infestation rates (percent of roots attacked) was only found for the more stable, semi-natural habitats. A comparative analysis of the regional root insect guilds of C. maculosa with corresponding data for the phytophagous insects associated with the flower heads revealed distinct taxonomical

  19. United Nations Women's Guild

    CERN Multimedia

    2005-01-01

    International Annual Bazaar of 22 November 2005 Thank you for helping to make the 2005 UNWG Bazaar a success! All 10 000 Lottery Tickets were sold thereby raising 100 000 CHF to be given to projects helping impoverished children all over the world. The winning lottery numbers are posted below. Please print this notice and post it as you see fit.  Prizes may be claimed at the Villa Les Feuillantines November 23 - December 9 from 11am-1pm.  After January 9 phone nr 022 917 33 86 between 9am-11.30am. Last day Friday May 22, 2006.Special thanks to all our kind and generous donors! All air and cruise tickets are non-transferable. Restrictions and validity dates on air and cruise tickets, travel vouchers, and gift certificates as stipulated by the donor apply. Prizes may not be redeemed for cash or other merchandise. Any attempt to do so will result in automatic forfeiture. Thank you for your support and good luck to all! 00154 01175 02081 02950 03891 05117 05920 07123 08110 08834 ...

  20. United Nations Women's Guild

    CERN Multimedia

    2005-01-01

    International Annual Bazaar of the 22 November 2005Thank you for helping to make the 2005 UNWG Bazaar a success! All 10 000 Lottery Tickets were sold, thereby raising 100 000 CHF to be given to projects helping impoverished children all over the world. The winning lottery numbers are posted below. Please print this notice and post it as you see fit. Prizes may be claimed at the Villa Les Feuillantines on November 23 - December 9 from 11am-1pm. After January 9 phone No. 022 917 33 86 between 9am-11.30am. Last day Friday May 22, 2006. Special thanks to all our kind and generous donors! All air and cruise tickets are non-transferable. Restrictions and validity dates on air and cruise tickets, travel vouchers, and gift certificates as stipulated by the donor apply. Prizes may not be redeemed for cash or other merchandise. Any attempt to do so will result in automatic forfeiture. Thank you for your support and good luck to all! 00154 01175 02081 02950 03891 05117 05920 07123 08110 08834 ...

  1. United Nations Women's Guild

    CERN Document Server

    2006-01-01

    International Annual Bazaar 21 November 2006 Thank you for helping to make the 2006 UNWG Bazaar a success! All the money will be given to projects helping impoverished children all over the world. The winning lottery numbers are posted below. Please print this notice and post it as you see fit. Prizes may be claimed at the Villa Les Feuillantines from November 22 - December 14 from 11am-1pm. After January 15 2007 please call 022 917 33 86 between 9 am-11.30 am. Last day for collection will be the May 22, 2007. Special thanks to all our kind and generous donors! All air and cruise tickets are non-transferable. Restrictions and validity dates on air and cruise tickets, travel vouchers, and gift certificates as stipulated by the donor will apply. Prizes may not be redeemed for cash or other merchandise. Any attempt to do so will result in automatic forfeiture. Thank you for your support and good luck to all! 111 1328 2466 3447 4478 6174 7323 8565 271 1374 2488 3502 4487 6237 7324 8623 ...

  2. Tsetse flies, biodiversity and the control of sleeping sickness. Structure of a Glossina guild in southwest Côte d'Ivoire

    Science.gov (United States)

    Gouteux, Jean-Paul; Jarry, Marc

    1998-10-01

    Tsetse fly guilds usually comprise two or three species. However, the presence of only one species often indicates that anthropic modifications have occurred in the habitat. On the other hand, more than three species are seldom observed in the same zone and the presence of five is extremely rare. Previous detailed studies have always focused on a single species, without taking into account interactions between species. The authors present the results of observations carried out in Côte d'Ivoire on a guild consisting of Glossina palpalis, G. pallicera, G. nigrofusca, G. longipalpis and G. fusca. Glossina have unusual physiological characteristics: both sexes feed exclusively on blood, they have a highly developed larviparity associated with a slow rhythm of reproduction (one larva about every ten days) and a long life expectancy (up to nine months). The authors report on the size of the flies, the hosts, feeding habits, ecodistribution, resting-places, flying heights, circadian activity and seasonal dynamics of tsetse fly populations in order to understand the organization of this guild. Each species feeds indiscriminately on a wide spectrum of hosts without a particular preference. Different species shared habitat (ecodistribution) and time (circadian and annual cycles). Thus, during an annual cycle, there is always a slight time-lag between the density peaks of G. palpalis and G. pallicera, the peak of the dominant species immediately preceding that of the dominated species. In a village area, 77% of the variations in density of G. pallicera were accounted for by the previous variations in density of the dominant species ( G. palpalis). Experiments show that G. pallicera and G. nigrofusca immediately invade anthropic areas from which G. palpalis has been partially removed by trapping. These species thus appear to confront each other in a global dynamic equilibrium. This suggests that there is a 'conflicting coexistence' between the cohabiting species. Whereas the

  3. Guilds as in medieval times. Trade associations turn against standardized advanced training for solar electricians; Zuenfte wie im Mittelalter. Handwerksverbaende bremsen eine bundesweit einheitliche Fortbildung fuer Solartechniker

    Energy Technology Data Exchange (ETDEWEB)

    Bernreuter, J.

    2000-12-01

    Solar engineering is an interdisciplinary activity. Electricians, fitters and heating technicians, roofers, metal workers and even carpenters may cooperate in the construction and installation of a solar system. So far, the German trade associations were unable to agree on a standardized training procedure for solar engineering. But time is getting short as this is not an age of medieval guilds. [German] Solartechnik durchbricht die traditionell eng gesteckten Grenzen der Fachhandwerker: Elektrotechniker, Installateure und Heizungsbauer, Dachdecker, Glaser, Metallbauer und sogar Tischler koennen am Bau einer Solaranlage beteiligt sein. Bislang einigten sich die zentralen Fachverbaende des Handwerks in Deutschland jedoch nicht auf eine gemeinsame Basis in Sachen Fortbildung. Viel Zeit bleibt ihnen allerdings nicht: Die Tage der alten Zuenfte sind eindeutig gezaehlt. (orig.)

  4. Avian communities in tidal salt marshes of San Francisco Bay: a review of functional groups by foraging guild and habitat association

    Science.gov (United States)

    Takekawa, John Y.; Woo, Isa; Gardiner, Rachel J.; Casazza, Michael L.; Ackerman, Joshua T.; Nur, Nadav; Liu, Leonard; Spautz, Hildie; Palaima, Arnas

    2011-01-01

    The San Francisco Bay estuary is highly urbanized, but it supports the largest remaining extent of tidal salt marshes on the west coast of North America as well as a diverse native bird community. San Francisco Bay tidal marshes are occupied by more than 113 bird species that represent 31 families, including five subspecies from three families that we denote as tidal-marsh obligates. To better identify the niche of bird species in tidal marshes, we present a review of functional groups based on foraging guilds and habitat associations. Foraging guilds describe the method by which species obtain food from tidal marshes, while habitat associations describe broad areas within the marsh that have similar environmental conditions. For example, the ubiquitous song sparrows (Alameda Melospiza melodia pusillula, Suisun M. m. maxillaris, and San Pablo M. m. samuelis) are surface-feeding generalists that consume prey from vegetation and the ground, and they are found across the entire marsh plain into the upland–marsh transition. In contrast, surface-feeding California black rails (Laterallus jamaicensis coturniculus) are cryptic, and generally restricted in their distribution to the mid- and high-marsh plain. Although in the same family, the endangered California clapper rail (Rallus longirostris obsoletus) has become highly specialized, foraging primarily on benthic fauna within marsh channels when they are exposed at low tide. Shorebirds such as the black-necked stilt (Himantopus mexicanus) typically probe in mud flats to consume macroinvertebrate prey, and are generally restricted to foraging on salt pans within the marsh plain, in ponds, or on mud flats during transitional stages of marsh evolution. The abundance and distribution of birds varies widely with changing water depths and vegetation colonization during different stages of restoration. Thus, tidal-marsh birds represent a rich and diverse community in bay marshes, with niches that may be distinguished by the

  5. Can guild- or site-specific contrasts in trends or phenology explain the changed role of the Dutch Wadden Sea for fish?

    Science.gov (United States)

    Tulp, Ingrid; van der Veer, Henk W.; Walker, Paddy; van Walraven, Lodewijk; Bolle, Loes J.

    2017-09-01

    The Wadden Sea bordering the Dutch, German and Danish coast, is traditionally a region with important functions for many fish species: as a nursery area for juveniles (marine juveniles), as a feeding area, as a transit to and from fresh water, and resident species complete their whole life cycle there. Because of indications that the importance of the Dutch Wadden Sea has changed drastically for many species during the past decades, we analysed and classified trends of 24 common fish species in the last 45 years, which were assigned to 5 different ecological guilds. Trends were examined for three Wadden Sea regions and compared to trends in the adjacent two North Sea coastal regions. For these analyses we made a combined use of two longterm time series: an annual beamtrawl survey, the Demeral Fish Survey (DFS) with a high spatial but poor seasonal resolution and a fyke series with a high seasonal but poor spatial resolution. We investigated for which species the DFS survey was appropriate for trend analysis, and we evaluated whether a change in timing may contribute to patterns in DFS time trends. Total fish biomass showed a similar pattern in all tidal basins with an increase from 1970 to 1980, a peak in the mid-1980s and a strong decline from 1980 to 2000, with a subsequent stable trend. The pattern in the coastal region deviated especially in the past 10 years, with a further decline along the Dutch Wadden coast and an increase along the mainland coast. Most dramatic declines throughout the Wadden Sea occurred in species belonging to the marine juvenile guild, notably plaice, sole and dab. A declining trend in marine juveniles is on-going in the western part, while it recently stabilised or even increased in the central and eastern part and in the coastal regions. Resident species showed more variable trends in the Wadden Sea with less pronounced directions: both increases and decreases occurred. In the coastal regions, several resident species have increased

  6. Interactive effects of climate and nutrient enrichment on patterns of herbivory by different feeding guilds in mangrove forests

    KAUST Repository

    Feller, Ilka C.; Ball, Marilyn C.; Ellis, Joanne; Lovelock, Catherine E.; Reef, Ruth

    2017-01-01

    , primary productivity and biotic interactions in the tropics are predicted to have stronger responses to increased nutrients than in temperate ecosystems. Habitats that occur across broad climatic ranges, such as mangrove forests, provide an opportunity

  7. Non-use Economic Values for Little-Known Aquatic Species at Risk: Comparing Choice Experiment Results from Surveys Focused on Species, Guilds, and Ecosystems

    Science.gov (United States)

    Rudd, Murray A.; Andres, Sheri; Kilfoil, Mary

    2016-09-01

    Accounting for non-market economic values of biological diversity is important to fully assess the benefits of environmental policies and regulations. This study used three choice experiments (species-, guild-, and ecosystem-based surveys) in parallel to quantify non-use values for little-known aquatic species at risk in southern Ontario. Mean willingness-to-pay (WTP) ranged from 9.45 to 21.41 per listing status increment under Canada's Species at Risk Act for both named and unnamed little-known species. Given the broad range of valuable ecosystem services likely to accrue to residents from substantial increases in water quality and the rehabilitation of coastal wetlands, the difference in WTP between species- and ecosystem-based surveys seemed implausibly small. It appeared that naming species—the `iconization' of species in two of the three surveys—had an important effect on WTP. The results suggest that reasonable annual household-level WTP values for little-known aquatic species may be 10 to 25 per species or 10 to 20 per listing status increment. The results highlighted the utility of using parallel surveys to triangulate on non-use economic values for little-known species at risk.

  8. Productivity

    DEFF Research Database (Denmark)

    Spring, Martin; Johnes, Geraint; Hald, Kim Sundtoft

    Productivity is increasingly critical for developed economies. It has always been important: as Paul Krugman puts it, “Productivity isn’t everything, but in the long run it is almost everything. A country’s ability to improve its standard of living over time depends almost entirely on its ability...... to raise its output per worker”(Krugman, 1994). Analyses of productivity have, by and large, been the preserve of economists. Operations Management (OM) is rooted in a similar concern for the efficient use of scarce resources; Management Accounting (MA) is concerned with the institutionalised measurement...... and management of productivity. Yet the three perspectives are rarely connected. This paper is a sketch of a literature review seeking to identify, contrast and reconcile these three perspectives. In so doing, it aims to strengthen the connections between policy and managerial analyses of productivity....

  9. Happy 40th Cinema Guild

    Science.gov (United States)

    Kuzyk, Raya

    2008-01-01

    On May 10, 1968, the Cannes Film Festival shuddered to a stop when filmmakers including Jean-Luc Godard and Francois Truffaut rushed the stage at the Palais des Festivals to protest French New Waver Henri Langlois's removal from his post as president of the National Cinematheque Francaise. Also that month, in that same spirit of film lovers'…

  10. On the ecological context of the earliest human settlements in Europe: Resource availability and competition intensity in the carnivore guild of Barranco León-D and Fuente Nueva-3 (Orce, Baza Basin, SE Spain)

    Science.gov (United States)

    Rodríguez-Gómez, Guillermo; Palmqvist, Paul; Rodríguez, Jesús; Mateos, Ana; Martín-González, Jesús A.; Espigares, M. Patrocinio; Ros-Montoya, Sergio; Martínez-Navarro, Bienvenido

    2016-07-01

    With an age of ∼1.4 Ma, the Early Pleistocene archaeopaleontological sites of Barranco León and Fuente Nueva-3 (Orce, Baza Basin, SE Spain) provide the oldest evidence on human presence in Western Europe, including the finding of a deciduous tooth of Homo sp., huge lithic assemblages of Oldowan tradition and abundant cut-marks on large mammal bones. Here we use a mathematical approach based on Leslie matrices to quantify for the large mammal species preserved at the sites the biomass of primary consumers available, the distribution of meat resources among the secondary consumers and the competition intensity within the carnivore guild. The results obtained show a community of large mammals with a high diversity of secondary consumers that would satisfy slightly less than half of their dietary requirements under optimal ecological conditions. In the case of Homo sp., and considering that flesh resources were obtained through the scavenging of ungulate carcasses, the model indicates that the ecosystems of the basin could hold 10-14 individuals per 100 km2 during a year, a value that is close to the mean population density of recent hunter-gatherers. These density estimates decrease slightly when a mixed hunting-scavenging strategy is considered and even more in the case of a strict hunting behavior. In addition, the value of the species competition index obtained for Homo sp. is among the lowest of the carnivore guild. These results suggest that the hominin populations that inhabited Southeast Spain during the Early Pleistocene behaved more as opportunistic scavengers than as active predators.

  11. Resource partitioning within major bottom fish species in a highly productive upwelling ecosystem

    Science.gov (United States)

    Abdellaoui, Souad; El Halouani, Hassan; Tai, Imane; Masski, Hicham

    2017-09-01

    The Saharan Bank (21-26°N) is a wide subtropical continental shelf and a highly productive upwelling ecosystem. The bottom communities are dominated by octopus and sparid fish, which are the main targets of bottom-trawl fishing fleets. To investigate resource partitioning within the bottom fish community, adult fish from 14 of the most abundant species were investigated for stomach content analysis. Samples were collected during two periods: October 2003 and May 2007. The diet of the analysed species showed more variation between periods than between size classes, suggesting that temporal or spatial variability in prey availability appears to play a significant role in their diet. Multivariate analysis and subsequent clustering led to a grouping of the species within five trophic guilds. Two species were fish feeders, and the others mainly fed on benthic invertebrates, where epibenthic crustaceans, lamellibranchs and fish were the most important groups in defining trophic guilds. We found that the studied species had a high rate of overlapping spatial distributions and overlapping trophic niches. In this highly productive upwelling ecosystem, where food resources may not be a limiting factor, inter-specific competition did not appear to be an important factor in structuring bottom fish communities. For the species that showed differences in the proportions of prey categories in comparison with other ecosystems, the rise of the proportion of epibenthic crustaceans in their diet was a common feature; a possible consequence of the benthic productivity of this highly productive upwelling ecosystem.

  12. The brotherhood-guild during the late Middle Ages and 16th and 17th centuries. The case of the brotherhood of surgeons, barbers, phlebotomists and doctors in Spain and in the New Spain / La Cofradía-Gremio durante la Baja Edad Media y siglos XVI y XVII, el caso de la Cofradía de cirujanos, barberos, flebotomianos y médicos en España y la Nueva España

    Directory of Open Access Journals (Sweden)

    María Luisa Rodríguez-Sala Gomezgil

    2009-10-01

    Full Text Available Brotherhoods and guilds are types of voluntary associations hardly distinguishable from one another. Guilds and brotherhoods emerged as necessary craftsmen’s associations, merchants and professionals looking for the defense of their trading interests in the face of encroachment by aliens and unqualified individuals. Their emergence during the High Middle Ages and the Low Middle Ages explain their tight loyalty to religious commitments, since the social life of those materialistic scenarios was totally influenced by religion. In this article we raise as a working hypothesis the study of the symbiotic relationship between both and we propose the concept of brotherhood-guild to design them. The five stages in their development are studied, some of their features, and later we portray their emergence in Spain, finally dealing with the question corresponding to the San Cosme and San Damian brotherhood, where physicians, surgeons, barbers, phlebotomists and pharmacists were joined together just as a brotherhood without the elements of the guild. In the final part I make a comparative study of features assumed by this type of voluntary association in New Spain, and pinpoint the survival of brotherhoods in some cities, specially the one of San Cosme and San Damian, aswell as the devotion to these two saints.

  13. Ciclos de actividad diaria y estacional de un gremio de saurios en las dunas de arena de Viesca, Coahuila, México Daily and seasonal activity patterns of a lizard guild in the sand dunes of Viesca, Coahuila, Mexico

    Directory of Open Access Journals (Sweden)

    Cristina García-De la Peña

    2007-06-01

    temperature seem to dictate activity patterns of this lizard guild at Viesca.

  14. Abundance and guild structure of grasshoppers (Orthoptera ...

    African Journals Online (AJOL)

    The lightly grazed area, characterised by tall vegetation and high aerial cover, low greenness of grass, and low frequency of forbs, was inhabited by grasshopper species associated with long and/or thick grass, that were mixed feeders or tough grass feeders. The mowed area, characterised by short vegetation and low ...

  15. Spatio-temporal variability in ontogenetic guild structure of an intertidal fish assemblage in central Chile Variabilidad espacio-temporal en la estructura de gremios ontogenéticos de un ensamble de peces intermareales de Chile central

    Directory of Open Access Journals (Sweden)

    PATRICIA A BERRÍOS

    2011-12-01

    Full Text Available Species resource use can vary throughout ontogeny, potentially affecting community dynamics. This can be particularly important for species facing high variability in environmental conditions and going through several orders of magnitude in size, as intertidal fishes. However, the influence of the resulting ontogenetic changes in guild membership on the spatio-temporal structure of fish assemblages remains virtually unknown. Here we assessed the spatial and temporal variability in the ontogenetic feeding guild (OFG structure of the fish assemblage inhabiting the temperate rocky intertidal zone along central Chilean coast. This was done applying principal component analysis (PCA and randomization tests (R-test on the relative OFG composition of fish assemblages, obtained from seasonal samples from ten pools located at two heights in the intertidal zone in three localities between 33° and 34° S. Overall, the PCA and R-tests suggest that spatial variability dominated over temporal variability in OFG structure, mainly due to a higher representation of omnivore species at high intertidal pools in two of the three sampled localities. However, phenology-related changes in the representation of fish size-classes (i.e. carnivore recruitment in spring-summer along with ontogenetic differences in habitat selection (e.g., selection for low intertidal pools by bigger-sized carnivore OFG contributed to both spatial and temporal differentiation in OFG structure. Finally, the relative representation of each OFG correlated with that of their dominant species, without evidence for density compensation. This suggests low levels of functional redundancy among species in each OFG, highlighting the vulnerability of assemblage functioning to size-biased disturbances as fishing.El uso de los recursos puede variar a través de la ontogenia, afectando potencialmente las dinámicas comunitarias. Esto puede ser de particular importancia en especies que enfrentan alta

  16. Recycling Resources. [Student Handbook, Sound Filmstrips, 12-Inch Record, Pollution Simulation Game, Teacher's Manual

    Science.gov (United States)

    Hatch, C. Richard

    A 15- to 20-hour course on materials recycling, teaching junior high school students about environmental problems and solutions, is developed in this set of materials. It attempts to stimulate them to participate in community efforts aimed at improving the environment. Items in the kit include: (1) teacher's manual, with lesson plans enumerating…

  17. Connectedness of land use, nutrients, primary production, and fish assemblages in oxbow lakes

    Science.gov (United States)

    Miranda, Leandro E.; Andrews, Caroline S.; Kroger, Robert

    2013-01-01

    We explored the strength of connectedness among hierarchical system components associated with oxbow lakes in the alluvial valley of the Lower Mississippi River. Specifically, we examined the degree of canonical correlation between land use (agriculture and forests), lake morphometry (depth and size), nutrients (total nitrogen and total phosphorus), primary production (chlorophyll-a), and various fish assemblage descriptors. Watershed (p < 0.01) and riparian (p = 0.02) land use, and lake depth (p = 0.05) but not size (p = 0.28), were associated with nutrient concentrations. In turn, nutrients were associated with primary production (p < 0.01), and primary production was associated with sunfish (Centrarchidae) assemblages (p < 0.01) and fish biodiversity (p = 0.08), but not with those of other taxa and functional guilds. Multiple chemical and biological components of oxbow lake ecosystems are connected to landscape characteristics such as land use and lake depth. Therefore, a top-down hierarchical approach can be useful in developing management and conservation plans for oxbow lakes in a region impacted by widespread landscape changes due to agriculture.

  18. Endohyphal bacterium enhances production of indole-3-acetic acid by a foliar fungal endophyte.

    Directory of Open Access Journals (Sweden)

    Michele T Hoffman

    Full Text Available Numerous plant pathogens, rhizosphere symbionts, and endophytic bacteria and yeasts produce the important phytohormone indole-3-acetic acid (IAA, often with profound effects on host plants. However, to date IAA production has not been documented among foliar endophytes -- the diverse guild of primarily filamentous Ascomycota that live within healthy, above-ground tissues of all plant species studied thus far. Recently bacteria that live within hyphae of endophytes (endohyphal bacteria have been detected, but their effects have not been studied previously. Here we show not only that IAA is produced in vitro by a foliar endophyte (here identified as Pestalotiopsis aff. neglecta, Xylariales, but that IAA production is enhanced significantly when the endophyte hosts an endohyphal bacterium (here identified as Luteibacter sp., Xanthomonadales. Both the endophyte and the endophyte/bacterium complex appear to rely on an L-tryptophan dependent pathway for IAA synthesis. The bacterium can be isolated from the fungus when the symbiotic complex is cultivated at 36°C. In pure culture the bacterium does not produce IAA. Culture filtrate from the endophyte-bacterium complex significantly enhances growth of tomato in vitro relative to controls and to filtrate from the endophyte alone. Together these results speak to a facultative symbiosis between an endophyte and endohyphal bacterium that strongly influences IAA production, providing a new framework in which to explore endophyte-plant interactions.

  19. NASPAA and Professionalism: Public Service or Guild Protectionism?

    Science.gov (United States)

    Fox, Charles J.

    1996-01-01

    The role of the National Association of Schools of Public Affairs and Administration (NASPAA) in promoting professionalism in public administration is explored, and potential problems associated with that role are discussed. The recent movement toward accreditation in public administration education based on a Total Quality Management mission is…

  20. Mountain aphid and parasitoid guilds on Aconitum spp. in Europe

    Czech Academy of Sciences Publication Activity Database

    Havelka, Jan; Tomanović, Ž.; Kos, K.; Kavallieratos, N. G.; Janeček, J.; Pons, X.; Rakhshani, E.; Starý, Petr

    2014-01-01

    Roč. 67, č. 1 (2014), s. 57-61 ISSN 1721-8861 Grant - others:Ministry of Education, Science and Technological Development(RS) III43001 Institutional support: RVO:60077344 Keywords : aphis * Aphididae * parasitoids Subject RIV: EH - Ecology, Behaviour Impact factor: 1.494, year: 2014 http://www.bulletinofinsectology.org/pdfarticles/vol67-2014-057-061havelka.pdf

  1. Family Common Name Scientific name Main food Main Guild Beach ...

    African Journals Online (AJOL)

    NICKSON

    Spur-winged Plover, Vanellus spinosus, crustaceans, insects, worms, Invertebrate, 1.38, 0.6, 3.4, 0.59, RES. Kittlits Plover, Charadrius ... Great Snipe, Gallinago media, crustaceans, worms, insects, Invertebrate, 0.34, PM. Common ... Red-eyed Dove, Streptopelia semitorquata, seeds, grains, Granivore, 1.38, 0.62, 0.59, RES.

  2. GUILD: GUidance for Information about Linking Data sets†

    Science.gov (United States)

    Gilbert, Ruth; Lafferty, Rosemary; Hagger-Johnson, Gareth; Zhang, Li-Chun; Smith, Peter; Dibben, Chris; Goldstein, Harvey

    2018-01-01

    Abstract Record linkage of administrative and survey data is increasingly used to generate evidence to inform policy and services. Although a powerful and efficient way of generating new information from existing data sets, errors related to data processing before, during and after linkage can bias results. However, researchers and users of linked data rarely have access to information that can be used to assess these biases or take them into account in analyses. As linked administrative data are increasingly used to provide evidence to guide policy and services, linkage error, which disproportionately affects disadvantaged groups, can undermine evidence for public health. We convened a group of researchers and experts from government data providers to develop guidance about the information that needs to be made available about the data linkage process, by data providers, data linkers, analysts and the researchers who write reports. The guidance goes beyond recommendations for information to be included in research reports. Our aim is to raise awareness of information that may be required at each step of the linkage pathway to improve the transparency, reproducibility, and accuracy of linkage processes, and the validity of analyses and interpretation of results. PMID:28369581

  3. The Guilded Classroom: Using Gamification to Engage and Motivate Undergraduates

    Science.gov (United States)

    Gressick, Julia; Langston, Joel B.

    2017-01-01

    There is a breadth of psychological research that points to potential cognitive benefits of game play. Games engage and motivate learners while promoting mastery of skills and content knowledge. Further, thoughtfully applying gaming elements and structures to classroom environments, an approach called gamification, has the potential to optimize…

  4. Development of Ecological Indicator Guilds for Land Management

    Science.gov (United States)

    2005-12-25

    McArthur. 1982. A comparison of water stress between males and females of 4 species of desert shrubs. Forensic Science 28:304-308. Friauf, J.J...dung-inhabiting beetles (Coleoptera). Annals Entomology Fennici 45:1-12. Hardin, E.D., and D.L. White. 1989. Rare Vascular Plant Taxa...multiple meanings of a concept. Annual Review of Entomology 34:423-451. Heinz Center. 2002. The State of the Nation’s Ecosystems: Measuring the

  5. Phylogenetic trophic specialization: a robust comparison of herbivorous guilds

    Czech Academy of Sciences Publication Activity Database

    Jorge, L. R.; Novotný, Vojtěch; Segar, Simon Tristram; Weiblen, G. D.; Miller, S. E.; Basset, Yves; Lewinsohn, T. M.

    2017-01-01

    Roč. 185, č. 4 (2017), s. 551-559 ISSN 0029-8549 R&D Projects: GA ČR(CZ) GA14-04258S EU Projects: European Commission(XE) 669609 - Diversity6continents Grant - others:European Social Fund(CZ) CZ.1.07/2.3.00/30.0006 Institutional support: RVO:60077344 Keywords : host plant range * distance-based specialization index (DSI*) * statistical comparability Subject RIV: EH - Ecology, Behaviour OBOR OECD: Ecology Impact factor: 3.130, year: 2016 https://link.springer.com/article/10.1007%2Fs00442-017-3980-7

  6. Tobacco Products

    Science.gov (United States)

    ... Exposure is High in Multiunit Housing Smokeless Products Electronic Cigarettes Youth Tobacco Prevention Tobacco Products Tobacco Ingredient ... Tweet Share Compartir Find Fact Sheets on Products (Cigars, Bidis and Betel Quid with Tobacco (Gutka) and ...

  7. Production of Modularised Product Systems

    DEFF Research Database (Denmark)

    Jacobsen, Peter

    2004-01-01

    but a solution. Modularisation is one tool used in designing the products. Designing and controlling a production system making customized products in an economical way is not an easy task. In order to fulfil the Lean and Agile manufacturing philosophies the production is often carried out in networks. Here...

  8. Product Customization

    DEFF Research Database (Denmark)

    Hvam, Lars; Mortensen, Niels Henrik; Riis, Jesper

    For the majority of industrial companies, customizing products and services is among the most critical means to deliver true customer value and achieve superior competitive advantage. The challenge is not to customize products and services in itself – but to do it in a profitable way...... from more than 40 product configuration projects in companies providing customer tailored products and services........ The implementation of a product configuration system is among the most powerful ways of achieving this in practice, offering a reduction of the lead time for products and quotations, faster and more qualified responses to customer inquiries, fewer transfers of responsibility and fewer specification mistakes...

  9. Size- and food-dependent growth drives patterns of competitive dominance along productivity gradients.

    Science.gov (United States)

    Huss, Magnus; Gårdmark, Anna; Van Leeuwen, Anieke; de Roos, André M

    2012-04-01

    Patterns of coexistence among competing species exhibiting size- and food-dependent growth remain largely unexplored. Here we studied mechanisms behind coexistence and shifts in competitive dominance in a size-structured fish guild, representing sprat and herring stocks in the Baltic Sea, using a physiologically structured model of competing populations. The influence of degree of resource overlap and the possibility of undergoing ontogenetic diet shifts were studied as functions of zooplankton and zoobenthos productivity. By imposing different size-dependent mortalities, we could study the outcome of competition under contrasting environmental regimes representing poor and favorable growth conditions. We found that the identity of the dominant species shifted between low and high productivity. Adding a herring-exclusive benthos resource only provided a competitive advantage over sprat when size-dependent mortality was high enough to allow for rapid growth in the zooplankton niche. Hence, the importance of a bottom-up effect of varying productivity was dependent on a strong top-down effect. Although herring could depress shared resources to lower levels than could sprat and also could access an exclusive resource, the smaller size at maturation of sprat allowed it to coexist with herring and, in some cases, exclude it. Our model system, characterized by interactions among size cohorts, allowed for consumer coexistence even at full resource overlap at intermediate productivities when size-dependent mortality was low. Observed shifts in community patterns were crucially dependent on the explicit consideration of size- and food-dependent growth. Accordingly, we argue that accounting for food-dependent growth and size-dependent interactions is necessary to better predict changes in community structure and dynamics following changes in major ecosystem drivers such as resource productivity and mortality, which are fundamental for our ability to manage exploitation of

  10. The demographic consequences of mutualism: ants increase host-plant fruit production but not population growth.

    Science.gov (United States)

    Ford, Kevin R; Ness, Joshua H; Bronstein, Judith L; Morris, William F

    2015-10-01

    The impact of mutualists on a partner's demography depends on how they affect the partner's multiple vital rates and how those vital rates, in turn, affect population growth. However, mutualism studies rarely measure effects on multiple vital rates or integrate them to assess the ultimate impact on population growth. We used vital rate data, population models and simulations of long-term population dynamics to quantify the demographic impact of a guild of ant species on the plant Ferocactus wislizeni. The ants feed at the plant's extrafloral nectaries and attack herbivores attempting to consume reproductive organs. Ant-guarded plants produced significantly more fruit, but ants had no significant effect on individual growth or survival. After integrating ant effects across these vital rates, we found that projected population growth was not significantly different between unguarded and ant-guarded plants because population growth was only weakly influenced by differences in fruit production (though strongly influenced by differences in individual growth and survival). However, simulations showed that ants could positively affect long-term plant population dynamics through services provided during rare but important events (herbivore outbreaks that reduce survival or years of high seedling recruitment associated with abundant precipitation). Thus, in this seemingly clear example of mutualism, the interaction may actually yield no clear benefit to plant population growth, or if it does, may only do so through the actions of the ants during rare events. These insights demonstrate the value of taking a demographic approach to studying the consequences of mutualism.

  11. Workforce productivity.

    Science.gov (United States)

    Williams, Ruth

    2012-10-26

    Managers who are responsible for delivering the workforce productivity element of the Quality, Innovation, Productivity and Prevention (QIPP) programme can network and share best practice through a dedicated NHS Employers webpage.

  12. Primary productivity

    Digital Repository Service at National Institute of Oceanography (India)

    Verlecar, X.N.; Parulekar, A.H.

    Photosynthetic production in the oceans in relation to light, nutrients and mixing processes is discussed. Primary productivity in the estuarine region is reported to be high in comparison to coastal and oceanic waters. Upwelling phenomenon...

  13. Effects of habitat-forming species richness, evenness, identity, and abundance on benthic intertidal community establishment and productivity.

    Directory of Open Access Journals (Sweden)

    Julie Lemieux

    Full Text Available In a context of reduced global biodiversity, the potential impacts from the loss of habitat-forming species (HFS on ecosystem structure and functioning must be established. These species are often the main community primary producers and have a major role in the establishment of organisms through facilitation processes. This study focuses on macroalgae and mussels as HFS within an intertidal zone along the St. Lawrence estuary (Quebec, Canada. Over a 16-week period, we manipulated the in situ diversity profile (richness, evenness, identity, and abundance of the dominant HFS (Fucus distichus edentatus, F. vesiculosus, and Mytilus spp. in order to define their role in both the establishment of associated species and community primary production. Contrary to expectation, no general change in HFS richness, evenness, abundance, or identity on associated species community establishment was observed. However, over the study period, the HFS diversity profile modified the structure within the trophic guilds, which may potentially affect further community functions. Also, our results showed that the low abundance of HFS had a negative impact on the primary productivity of the community. Our results suggest that HFS diversity profiles have a limited short-term role in our study habitat and may indicate that biological forcing in these intertidal communities is less important than environmental conditions. As such, there was an opportunistic establishment of species that ensured rapid colonization regardless of the absence, or the diversity profile, of facilitators such as HFS.

  14. FAA Film Catalog.

    Science.gov (United States)

    Federal Aviation Administration (DOT), Washington, DC.

    Some 75 films from the U.S. Department of Transportation's Federal Aviation Administration are listed in this catalog. Topics dealt with include aerodynamics, airports, aviation history and careers, flying clubs, navigation and weather. Most of the films are 16mm sound and color productions. Filmstrips requiring a 35mm projector and phonograph or…

  15. Product (RED)

    DEFF Research Database (Denmark)

    Ponte, Stefano

    2011-01-01

    ) and the consumers who buy iconic brand products to help ‘distant others’. While in many other forms of causumerism, labels or certification systems ‘prove’ that a product is just, in RED, aid celebrities provide the proof. From the consumer point of view both labels and celebrities provide a similar simplification...... of complex social, economic, and environmental processes. At the same time, we argue that there are important distinctions as well—labels and certifications are ultimately about improving the conditions of production, whereas RED is about accepting existing production and trade systems and donating......(PRODUCT)RED™ (hereafter RED) is a cobranding initiative launched in 2006 by the aid celebrity Bono to raise money from product sales to support The Global Fund to Fight AIDS, Tuberculosis and Malaria. In this paper we argue that RED is shifting the boundaries of ‘causumerism’ (shopping...

  16. Generalized product

    OpenAIRE

    Greco, Salvatore; Mesiar, Radko; Rindone, Fabio

    2014-01-01

    Aggregation functions on [0,1] with annihilator 0 can be seen as a generalized product on [0,1]. We study the generalized product on the bipolar scale [–1,1], stressing the axiomatic point of view. Based on newly introduced bipolar properties, such as the bipolar increasingness, bipolar unit element, bipolar idempotent element, several kinds of generalized bipolar product are introduced and studied. A special stress is put on bipolar semicopulas, bipolar quasi-copulas and bipolar copulas.

  17. Swine production.

    Science.gov (United States)

    Plain, Ronald L; Lawrence, John D

    2003-07-01

    The US swine industry is large and growing. The quantity of pork desired by consumers of US pork is growing at the rate of 1.5%/y. New production systems and new technology have enabled production per sow to grow at a rate of 4% annually in recent years. Consequently, the number of sows in the United States is declining. Because productivity growth is outpacing demand growth, the deflated price of hogs and pork is declining. Hog production and prices continue to exhibit strong seasonal and cyclic patterns. Pork production is usually lowest in the summer and highest in the fall. Production and prices tend to follow 4-year patterns. The US swine industry continues to evolve toward fewer and larger producers who rely on contracts for both hog production and marketing. In 2000, over half of the hogs marketed were from approximately 156 firms marketing more than 50,000 head annually. These producers finished 60% of their production in contract facilities. Over 90% of their marketings were under contract or were owned by a packer. These producers expressed a high level of satisfaction with hog production. Both they and their contract growers were satisfied with production contracts. These large producers were satisfied with their marketing contracts and planned to continue them in the future. The hog industry has changed a great deal in the last decade. There is little reason to believe this rapid rate of change will not continue. This swine industry is highly competitive and profit driven. Profit margins are too small to allow producers the luxury of ignoring new technology and innovative production systems. Consequently, hog production will continue its rapid evolution from traditional agriculture to typical industry.

  18. Antiproton production

    International Nuclear Information System (INIS)

    Allaby, J.V.

    1984-01-01

    The basic definitions used in the physics literature on particle production are reviewed. The data on anti p production are interpreted in order to provide an estimate of the yield of anti p's from typical target at the antiproton accumulator, including the effects of re-absorption in the target. (orig.)

  19. Radioisotope production

    International Nuclear Information System (INIS)

    1988-01-01

    The trial production runs started in the previous report period were continued and have been extended to 67 Ga, 81 Rb/ 81m Kr and 111 In, the production of which will be taken over from the Pretoria cyclotron at the end of this year, when that machine is scheduled to be shut down. After commissioning of the target water cooling system and the helium cooling system for beam foil windows at the beginning of this year, these production runs could also be extended to high beam currents (up to 50 μA). Test consignments of a number of products have been supplied to various potential future users, and 123 I, in the form of Na 123 I capsules as well as 123 I-sodium hippurate, and 52 Fe-citrate have actually been used with success in trial diagnostic studies on patients. A procedure for labelling IPPA and 3-IPMPA with 123 I has been developed, while initial work has also been done on the radioiodination of monoclonal antifibrine antibodies. The last major facility needed for the commencement of the routine radioisotope production programme, namely the multiple-target facility, is now ready for installation in the production vault within the next few weeks, and routine production runs are expected to start in November 1988. 4 figs., 18 refs

  20. Ethanol production

    Energy Technology Data Exchange (ETDEWEB)

    Kolleurp, F; Daugulis, A J

    1985-05-01

    Extractive fermentation is a technique that can be used to reduce the effect of end-product inhibition through the use of a water-immiscible phase which removes fermentation products in situ. This has the beneficial effect of not only removing inhibitory products as they are formed (thus keeping reaction rates high) but also has the potential for reducing product recovery costs. We have chosen to examine the ethanol fermentation as a model system for end product inhibition and extractive fermentation, and have developed a computer model predicting the productivity enhancement possible with this technique. The model predicts an ethanol productivity of 82.6 g/L-h if a glucose feed of 750 g/L is fermented with a solvent having a distribution coefficient of 0.5 at a dilution rate of 5.0 h . This is more than 10 times higher than for a conventional chemostat fermentation of a 250 g/L glucose feed. In light of this, a systematic approach to extractive fermentation has been undertaken involving the screening of more than 1,000 solvents for their extractive properties. UNIFAC and UNIQUAC estimates of distribution coefficients and selectivities were compiled and ranked in a database, together with other important physical properties, such as density, surface tension and viscosity. Preliminary shake-flask and chemostat biocompatibility studies on the most promising solvents have been undertaken. The previous predictive, data base and experimental results are discussed.

  1. Product plots.

    Science.gov (United States)

    Wickham, Hadley; Hofmann, Heike

    2011-12-01

    We propose a new framework for visualising tables of counts, proportions and probabilities. We call our framework product plots, alluding to the computation of area as a product of height and width, and the statistical concept of generating a joint distribution from the product of conditional and marginal distributions. The framework, with extensions, is sufficient to encompass over 20 visualisations previously described in fields of statistical graphics and infovis, including bar charts, mosaic plots, treemaps, equal area plots and fluctuation diagrams. © 2011 IEEE

  2. Tanning Products

    Science.gov (United States)

    ... must obtain a signed, FDA-prescribed risk acknowledgement certification before use that states that they have been informed of the risks to health that may result from use of sunlamp products. Using tanning lamps, booths, or beds: If you ...

  3. Bc production

    International Nuclear Information System (INIS)

    Lusignoli, M.; Masetti, M.; Petrarca, S.

    1991-01-01

    The pseudoscalar meson B c is the simplest particle containing more than one heavy quark of different flavours. Its production cross sections at accelerators presently running or in project are estimated using the HERWIG parton shower Monte Carlo code. (orig.)

  4. Production models

    DEFF Research Database (Denmark)

    Svensson, Carsten

    2002-01-01

    The Project is co-financed with Nilpeter A/S and investigates the industrialization of build to order production. Project content: - Enterprise engineering - Specification processes - Mass Customization/ Build To Order - Knowledge/information management - Configuration - Supply Chain Management...

  5. Marketplace Products

    Data.gov (United States)

    U.S. Department of Health & Human Services — The Office of Enterprise Data and Analytics, within the Centers for Medicare aqnd Medicaid Services (CMS), has developed a set of information products and analytics...

  6. Lean production

    OpenAIRE

    Veselková, Jana

    2011-01-01

    The goal of this Bachelor's Thesis is to describe the general principles of lean production and afterwards apply these principles in a particular company. Due to the changing conditions on the world market is among companies growing concern about such innovative business systems. The theoretical part of this work deals with the general characteristics of lean production, including their history and focus on Toyota, as the originator of most lean systems. Mentioned are also the economic aspect...

  7. Productive Gaming

    OpenAIRE

    Brandstätter , Ulrich; Sommerer , Christa

    2016-01-01

    Part 4: Short Papers; International audience; Video games can be appropriated for productive purposes. Commercial games and game engines are often used for video productions, and game development companies provide development kits and modding environments to gaming communities and independent developers. With gamification, game principles are deployed in non-game contexts for benefits beyond pure entertainment. Most approaches are more focused on using games and their design elements rather t...

  8. Biocidal Products and Borderline Products

    OpenAIRE

    Yılmaz, Abdullah

    2015-01-01

    Biocidal product is defined as preparations sold in ready form to use that contains one or more active substances and has control effect, movement restriction or destruction against harmful organisms which has harmful effect on products that people use or produce or animals or environment. These substances which are composed mostly chemicals and ease our lifes are used in increasingly every areas of our life on the other hand they carry variety of risks and threaten our lives. In terms of env...

  9. Environmental products

    International Nuclear Information System (INIS)

    1995-12-01

    This volume in the series of directories of Quebec organizations doing research and development involving biomass-based products or processes focused on environmental products and services. The objective of this, and other directories in the series, was to stimulate interaction, and hence more aggressive development, of products and processes capable of being commercialized, to facilitate interaction between those who possess and those who could utilize biomass resources, and in general, to encourage the development of biomass-based industries. A total of 83 organizations were included in standardized format, describing areas of research interest, principal areas of technological expertise, major equipment, personnel and name and address of contact person. In this volume fields of research interest included environmental audits, waste treatment, biodegradation, composting, oxidation, photodegradation, disinfection and combustion. tabs

  10. Uranium production

    International Nuclear Information System (INIS)

    Spriggs, M.

    1980-01-01

    The balance between uranium supply and demand is examined. Should new resources become necessary, some unconventional sources which could be considered include low-grade extensions to conventional deposits, certain types of intrusive rock, tuffs, and lake and sea-bed sediments. In addition there are large but very low grade deposits in carbonaceous shales, granites, and seawater. The possibility of recovery is discussed. Programmes of research into the feasibility of extraction of uranium from seawater, as a by-product from phosphoric acid production, and from copper leach solutions, are briefly discussed. Other possible sources are coal, old mine dumps and tailings, the latter being successfully exploited commercially in South Africa. The greatest constraints on increased development of U from lower grade sources are economics and environmental impact. It is concluded that apart from U as a by-product from phosphate, other sources are unlikely to contribute much to world requirements in the foreseeable future. (U.K.)

  11. Bottom production

    International Nuclear Information System (INIS)

    Baines, J.; Baranov, S.P.; Bartalini, P.; Bay, A.; Bouhova, E.; Cacciari, M.; Caner, A.; Coadou, Y.; Corti, G.; Damet, J.; Dell-Orso, R.; De Mello Neto, J.R.T.; Domenech, J.L.; Drollinger, V.; Eerola, P.; Ellis, N.; Epp, B.; Frixione, S.; Gadomski, S.; Gavrilenko, I.; Gennai, S.; George, S.; Ghete, V.M.; Guy, L.; Hasegawa, Y.; Iengo, P.; Jacholkowska, A.; Jones, R.; Kharchilava, A.; Kneringer, E.; Koppenburg, P.; Korsmo, H.; Kramer, M.; Labanca, N.; Lehto, M.; Maltoni, F.; Mangano, M.L.; Mele, S.; Nairz, A.M.; Nakada, T.; Nikitin, N.; Nisati, A.; Norrbin, E.; Palla, F.; Rizatdinova, F.; Robins, S.; Rousseau, D.; Sanchis-Lozano, M.A.; Shapiro, M.; Sherwood, P.; Smirnova, L.; Smizanska, M.; Starodumov, A.; Stepanov, N.; Vogt, R.

    2000-01-01

    In the context of the LHC experiments, the physics of bottom flavoured hadrons enters in different contexts. It can be used for QCD tests, it affects the possibilities of B decays studies, and it is an important source of background for several processes of interest. The physics of b production at hadron colliders has a rather long story, dating back to its first observation in the UA1 experiment. Subsequently, b production has been studied at the Tevatron. Besides the transverse momentum spectrum of a single b, it has also become possible, in recent time, to study correlations in the production characteristics of the b and the b. At the LHC new opportunities will be offered by the high statistics and the high energy reach. One expects to be able to study the transverse momentum spectrum at higher transverse momenta, and also to exploit the large statistics to perform more accurate studies of correlations

  12. Bottom production

    Energy Technology Data Exchange (ETDEWEB)

    Baines, J.; Baranov, S.P.; Bartalini, P.; Bay, A.; Bouhova, E.; Cacciari, M.; Caner, A.; Coadou, Y.; Corti, G.; Damet, J.; Dell-Orso, R.; De Mello Neto, J.R.T.; Domenech, J.L.; Drollinger, V.; Eerola, P.; Ellis, N.; Epp, B.; Frixione, S.; Gadomski, S.; Gavrilenko, I.; Gennai, S.; George, S.; Ghete, V.M.; Guy, L.; Hasegawa, Y.; Iengo, P.; Jacholkowska, A.; Jones, R.; Kharchilava, A.; Kneringer, E.; Koppenburg, P.; Korsmo, H.; Kramer, M.; Labanca, N.; Lehto, M.; Maltoni, F.; Mangano, M.L.; Mele, S.; Nairz, A.M.; Nakada, T.; Nikitin, N.; Nisati, A.; Norrbin, E.; Palla, F.; Rizatdinova, F.; Robins, S.; Rousseau, D.; Sanchis-Lozano, M.A.; Shapiro, M.; Sherwood, P.; Smirnova, L.; Smizanska, M.; Starodumov, A.; Stepanov, N.; Vogt, R.

    2000-03-15

    In the context of the LHC experiments, the physics of bottom flavoured hadrons enters in different contexts. It can be used for QCD tests, it affects the possibilities of B decays studies, and it is an important source of background for several processes of interest. The physics of b production at hadron colliders has a rather long story, dating back to its first observation in the UA1 experiment. Subsequently, b production has been studied at the Tevatron. Besides the transverse momentum spectrum of a single b, it has also become possible, in recent time, to study correlations in the production characteristics of the b and the b. At the LHC new opportunities will be offered by the high statistics and the high energy reach. One expects to be able to study the transverse momentum spectrum at higher transverse momenta, and also to exploit the large statistics to perform more accurate studies of correlations.

  13. Phytosanitary products

    International Nuclear Information System (INIS)

    1995-12-01

    One of a series of directories of Quebec universities, industrial and governmental agencies in Quebec actively involved in research and development of phytosanitary products or services derived from or associated with biomass products. This directory contained standardized entries for 79 organizations from the agriculture, forestry and environmental sectors, active in fields ranging from genetic engineering, fertilizers, crop diseases and pest management, forestry management, harvesting methods and bioconversion. Each entry provided information about major fields of research interest, principal technologies utilized, major equipment, personnel, and name and address of person to be contacted for further information. tabs

  14. Aluminium production

    International Nuclear Information System (INIS)

    Winter, B.; Ayers, J.; Sammer, G.

    2001-01-01

    Aluminium is the most important non-ferrous metal by quantity. Aluminium is produced by electrolysis of aluminium oxide (also known as alumina). Alumina is produced by refining bauxite. The quantity of primary and secondary aluminium production in ECE-countries between 1992 and 1998 is shown. The European aluminium industry employs approximately 200 000 employees. The annual aluminium production in the European Union was 3.58 million tonnes in 1994, of which 44 % was secondary aluminium. In 1996 3.96 million tonnes of aluminium were produced in the EU, of which 44 % was secondary aluminium. (author)

  15. Spatial and seasonal variability of fractionated phytoplankton biomass and primary production in the frontal region of the Northern Adriatic Sea

    Directory of Open Access Journals (Sweden)

    M.R. VADRUCCI

    2005-06-01

    Full Text Available Spatial and seasonal patterns of variation of fractionated phytoplankton biomass and primary production and their relationships with nutrient concentrations were analyzed along an inshore - offshore gradient and in relation to the presence of a frontal system in the Northern Adriatic Sea. Sampling was carried out in winter and summer during four oceanographic cruises (June 1996 and 1997, February 1997 and 1998 as part of the PRISMA II project. Water samples for determining nutrient concentrations, phytoplankton biomass (as Chla and primary production (as 14 C assimilation were collected at five optical depths. Sampling stations were located along 2 or 4 parallel transects arranged perpendicularly to the shoreline and the frontal system. The transects were located at such a distance from the coast that the frontal system crossed them at their halfway point. Total dissolved nitrogen (TDN and total dissolved phosphorus concentrations (TDP were 12.41 ± 3 .95 mM and 0.146 ± 0 .070 mM, respectively. The values in the two seasonal periods were similar, decreasing along the inshore-offshore gradient. Values for phytoplankton biomass and primary productionwere higher in the winter than the summer cruises, and decreased, in both seasonal periods, along the inshore / offshore gradient. Moreover, in both seasonal periods, picophytoplankton dominated both biomass and productivity, (56% and 44%, respectively at stations beyond the frontal system, while microphytoplankton was more important at stations inside it (44% and 44%, respectively. Total phytoplankton biomass and primary production were directly related to nutrient concentrations. Regarding size classes, significant patterns of variation with nutrients were observed particularly for biomass. The results indicate that the size structure and function of phytoplankton guilds seem to be mediated by nutrient inflow, as well as by competitive interaction among size fractions.

  16. Uranium production

    International Nuclear Information System (INIS)

    Jones, J.Q.

    1981-01-01

    The domestic uranium industry is in a state of stagflation. Costs continue to rise while the market for the product remains stagnant. During the last 12 months, curtailments and closures of mines and mills have eliminated over 5000 jobs in the industry, plus many more in those industries that furnish supplies and services. By January 1982, operations at four mills and the mines that furnish them ore will have been terminated. Other closures may follow, depending on cost trends, duration of current contracts, the degree to which mills have been amortized, the feasibility of placing mines on standby, the grade of the ore, and many other factors. Open-pit mines can be placed on standby without much difficulty, other than the possible cost of restoration before all the ore has been removed. There are a few small, dry, underground mines that could be mothballed; however, the major underground producers are wet sandstone mines that in most cases could not be reopened after a prolonged shutdown; mills can be mothballed for several years. Figure 8 shows the location of all the production centers in operation, as well as those that have operated or are on standby. Table 1 lists the same production centers plus those that have been deferred, showing nominal capacity of conventional mills in tons of ore per calendar day, and the industry production rate for those mills as of October 1, 1981

  17. Novolak Production

    Science.gov (United States)

    Aiba, Hiroshi

    Novolak resins are produced by reacting formaldehyde (30-55% concentration) with phenol under acidic conditions, with oxalic acid as the preferred catalyst and in special conditions, sulfuric acid. Depending on the batch size, all raw material components can be introduced into the reactor, or when there is an increase in the batch size as well as in the reactor volume, the reaction exotherm is controlled by a gradual addition of formaldehyde. Modern novolak production facilities are automated and programmed for reduced operational cost. A flow diagram of a general production line for the manufacture of novolak is shown. Recovery of the novolak is accomplished by the removal of water and devolatilization of crude novolak to molten, low-free phenol novolak resin which can be isolated as flake or pastille or dissolved in appropriate solvents. Novolak is stored either in a solid flake or pastille form or in solution. Most production is conducted under atmospheric conditions, but there are some recent, novel activities such as pressure in a hermetically-closed reactor reaching 0.1-10 MPa by using the heat of reaction without reflux to shorten reaction time, accelerating dehydration time by flash distillation, and providing economic benefit in the cost of novolak production.

  18. Product Configuration Systems and Productivity

    DEFF Research Database (Denmark)

    Pedersen, Jørgen Lindgaard; Edwards, Kasper

    2004-01-01

    Twelve companies have been interviewed with the purpose to get information about technical, economic and organisational matters in respect of Product Configuration Systems (PCS).Combinations of qualitative interviews and quantitative scoring have been used in ranking expected and realized results...

  19. Tequila production.

    Science.gov (United States)

    Cedeño, M

    1995-01-01

    Tequila is obtained from the distillation of fermented juice of agave plant, Agave tequilana, to which up to 49% (w/v) of an adjunct sugar, mainly from cane or corn, could be added. Agave plants require from 8 to 12 years to mature and during all this time cleaning, pest control, and slacken of land are required to produce an initial raw material with the appropriate chemical composition for tequila production. Production process comprises four steps: cooking to hydrolyze inulin into fructose, milling to extract the sugars, fermentation with a strain of Saccharomyces cerevisiae to convert the sugars into ethanol and organoleptic compounds, and, finally, a two-step distillation process. Maturation, if needed, is carried out in white oak barrels to obtain rested or aged tequila in 2 or 12 months, respectively.

  20. Lepton production

    CERN Multimedia

    2002-01-01

    This experiment aims to settle open questions in the hadronic production of electrons, muons and neutrinos. Prominent among these are $e/\\mu$ universality, the contribution of charm decay to lepton pair production, and the "anomalous" low mass pairs.\\\\ The experimental design aims to optimize the combination of:\\\\- electron identification\\\\ - muon identification \\\\ - missing energy measurement for neutrinos \\\\ - vertex identification (for $\\tau \\simeq \\tau_{charm}$). \\\\ \\\\ The major components of the apparatus are shown in the figure. In the vertex region a proton beam of transverse size $\\simeq 50 \\mu$ impinges on a beryllium target of diameter $50 \\mu$, and high precision tracking in the vertex region is achieved by silicon strip detectors. Charged particle momenta are measured using a dipole magnet and high resolution drift chambers. Electrons are identified by the combination of the transition radiation detector and the finely segmented front section of the Uranium/Liquid Argon calorimeter. Essentially t...

  1. Product customization

    DEFF Research Database (Denmark)

    Lueg, Rainer

    2015-01-01

    This case study deals with the extension, customization, and profitability of two new product lines of a bicycle manufacturer. It can serve both as a discussion basis in class as well as an exam for advanced Master students in management, marketing, and ccounting. The case illustrates how variance...... application of financial analysis can lead to dysfunctional decisions that run counter to a company’s business model....

  2. Isotope production

    Energy Technology Data Exchange (ETDEWEB)

    Lewis, Dewi M.

    1995-07-15

    Some 2 0% of patients using radiopharmaceuticals receive injections of materials produced by cyclotrons. There are over 200 cyclotrons worldwide; around 35 are operated by commercial companies solely for the production of radio-pharmaceuticals with another 25 accelerators producing medically useful isotopes. These neutron-deficient isotopes are usually produced by proton bombardment. All commonly used medical isotopes can be generated by 'compact' cyclotrons with energies up to 40 MeV and beam intensities in the range 50 to 400 microamps. Specially designed target systems contain gram-quantities of highly enriched stable isotopes as starting materials. The targets can accommodate the high power densities of the proton beams and are designed for automated remote handling. The complete manufacturing cycle includes large-scale target production, isotope generation by cyclotron beam bombardment, radio-chemical extraction, pharmaceutical dispensing, raw material recovery, and labelling/packaging prior to the rapid delivery of these short-lived products. All these manufacturing steps adhere to the pharmaceutical industry standards of Good Manufacturing Practice (GMP). Unlike research accelerators, commercial cyclotrons are customized 'compact' machines usually supplied by specialist companies such as IBA (Belgium), EBCO (Canada) or Scanditronix (Sweden). The design criteria for these commercial cyclotrons are - small magnet dimensions, power-efficient operation of magnet and radiofrequency systems, high intensity extracted proton beams, well defined beam size and automated computer control. Performance requirements include rapid startup and shutdown, high reliability to support the daily production of short-lived isotopes and low maintenance to minimize the radiation dose to personnel. In 1987 a major step forward in meeting these exacting industrial requirements came when IBA, together with the University of Louvain-La-Neuve in Belgium, developed the Cyclone-30

  3. Diboson production

    Directory of Open Access Journals (Sweden)

    Evans D.L.

    2013-05-01

    Full Text Available Measurements of diboson production cross sections in pp collisions at the LHC at a centre of mass energy √s = 7 and 8 TeV, and in pp̅ collisions at the Tevatron at √s = 1.96 TeV are reviewed and compared with standard model predictions. Limits on charged and neutral anomalous triple gauge couplings extracted from the selected diboson event samples are also compared.

  4. Product design - Molecules, devices, functional products, and formulated products

    DEFF Research Database (Denmark)

    Gani, Rafiqul; Ng, Ka M.

    2015-01-01

    Chemical product design is a multidisciplinary and diverse subject. This article provides an overview of product design while focusing on product conceptualization. Four product types are considered - molecular products, formulated products, devices and functional products. For molecular products......, computer-aided design tools are used to predict the physicochemical properties of single molecules and blends. For formulated products, an integrated experiment-modeling approach is used to generate the formula with the specified product attributes. For devices and functional products, conceptual product...... design is carried out by modeling the product based on thermodynamics, kinetics and transport processes, by performing experiments, and by decision making based on rule-based methods The results are product specifications in terms of the type of ingredients, composition, and the structure, form, shape...

  5. Size- and food-dependent growth drives patterns of competitive dominance along productivity gradients

    NARCIS (Netherlands)

    Huss, M.; Gårdmark, A.; van Leeuwen, A.; de Roos, A.M.

    2012-01-01

    Patterns of coexistence among competing species exhibiting size- and food-dependent growth remain largely unexplored. Here we studied mechanisms behind coexistence and shifts in competitive dominance in a size-structured fish guild, representing sprat and herring stocks in the Baltic Sea, using a

  6. New Product

    Institute of Scientific and Technical Information of China (English)

    铭瑄

    2012-01-01

    Double Coin Holdings Launch New OTR Tire REM-15 With the increase of the demand for large-scale bulldozer in American market, Double Coin Group Co., Ltd. developed the Double Coin REM-15 OTR tire. This product is applicable for large-scale loader and bulldozer. The most remarkable characteristic is that it has good energy-saving performance and durability with low operating cost while the performances of tires aren't lowered. The new REM-15 is currently offered in the 17.5R25 size, which will be expanded to larger sizes in the future.

  7. production lines

    Directory of Open Access Journals (Sweden)

    Jingshan Li

    2000-01-01

    Full Text Available In this work, serial production lines with finished goods buffers operating in the pull regime are considered. The machines are assumed to obey Bernoulli reliability model. The problem of satisfying customers demand is addressed. The level of demand satisfaction is quantified by the due-time performance (DTP, which is defined as the probability to ship to the customer a required number of parts during a fixed time interval. Within this scenario, the definitions of DTP bottlenecks are introduced and a method for their identification is developed.

  8. Bottom Production

    CERN Document Server

    Nason, P.; Schneider, O.; Tartarelli, G.F.; Vikas, P.; Baines, J.; Baranov, S.P.; Bartalini, P.; Bay, A.; Bouhova, E.; Cacciari, M.; Caner, A.; Coadou, Y.; Corti, G.; Damet, J.; Dell'Orso, R.; De Mello Neto, J.R.T.; Domenech, J.L.; Drollinger, V.; Eerola, P.; Ellis, N.; Epp, B.; Frixione, S.; Gadomski, S.; Gavrilenko, I.; Gennai, S.; George, S.; Ghete, V.M.; Guy, L.; Hasegawa, Y.; Iengo, P.; Jacholkowska, A.; Jones, R.; Kharchilava, A.; Kneringer, E.; Koppenburg, P.; Korsmo, H.; Kramer, M.; Labanca, N.; Lehto, M.; Maltoni, F.; Mangano, Michelangelo L.; Mele, S.; Nairz, A.M.; Nakada, T.; Nikitin, N.; Nisati, A.; Norrbin, E.; Palla, F.; Rizatdinova, F.; Robins, S.; Rousseau, D.; Sanchis-Lozano, M.A.; Shapiro, M.; Sherwood, P.; Smirnova, L.; Smizanska, M.; Starodumov, A.; Stepanov, N.; Vogt, R.

    2000-01-01

    We review the prospects for bottom production physics at the LHC. Members of the working group who has contributed to this document are: J. Baines, S.P. Baranov, P. Bartalini, A. Bay, E. Bouhova, M. Cacciari, A. Caner, Y. Coadou, G. Corti, J. Damet, R. Dell'Orso, J.R.T. De Mello Neto, J.L. Domenech, V. Drollinger, P. Eerola, N. Ellis, B. Epp, S. Frixione, S. Gadomski, I. Gavrilenko, S. Gennai, S. George, V.M. Ghete, L. Guy, Y. Hasegawa, P. Iengo, A. Jacholkowska, R. Jones, A. Kharchilava, E. Kneringer, P. Koppenburg, H. Korsmo, M. Kraemer, N. Labanca, M. Lehto, F. Maltoni, M.L. Mangano, S. Mele, A.M. Nairz, T. Nakada, N. Nikitin, A. Nisati, E. Norrbin, F. Palla, F. Rizatdinova, S. Robins, D. Rousseau, M.A. Sanchis-Lozano, M. Shapiro, P. Sherwood, L. Smirnova, M. Smizanska, A. Starodumov, N. Stepanov, R. Vogt

  9. Production management (1976)

    International Nuclear Information System (INIS)

    Lee, Sun Ryong

    1976-03-01

    This book introduces production management theory, which gives descriptions of production and system, systems approach, development of production management, Taylor system, Ford system, types of production system, measuring ingredients model of production management, decision of production management, selection of production facilities, arrangement of facilities design of work method and task, work measure system, demanding fore casting, production quality system and credibility system.

  10. From Product Models to Product State Models

    DEFF Research Database (Denmark)

    Larsen, Michael Holm

    1999-01-01

    A well-known technology designed to handle product data is Product Models. Product Models are in their current form not able to handle all types of product state information. Hence, the concept of a Product State Model (PSM) is proposed. The PSM and in particular how to model a PSM is the Research...

  11. Tobacco Products Production and Operations Reports

    Data.gov (United States)

    Department of the Treasury — Monthly statistical reports on tobacco products production and operations. Data for Tobacco Statistical Release is derived directly from the Report – Manufacturer of...

  12. Innovation in Product Development

    DEFF Research Database (Denmark)

    McAloone, Tim C.; Restrepo-Giraldo, John Dairo

    2005-01-01

    The course on Innovation in Product Development attempts to identify and understand the nature of innovation and product development and their important factors. The course takes both a theoretical and a practical approach and employs a mix of lectures, project work and group discussion. Format...... insight. Course content The following aspects of innovation in product development are considered: - Humans and products - Needs and products - Product life - Teams creating products - Products creating business - Product development models - Organising product development - Product development tools...... - The future of product development....

  13. SaferProducts API

    Data.gov (United States)

    US Consumer Product Safety Commission — On March 11, 2011, the U.S. Consumer Product Safety Commission launched SaferProducts.gov. This site hosts the agency's new Publicly Available Consumer Product...

  14. Product and labour market regulations, production prices, wages and productivity

    NARCIS (Netherlands)

    Cette, G.; Lopez, J.; Mairesse, J.

    2015-01-01

    This study is an attempt to evaluate the effects of product and labour market regulations on industry productivity through their various impacts on changes in production prices and wages. In a first stage, the estimation of a regression equation on an industry*country panel, with controls for

  15. Production management (2000)

    International Nuclear Information System (INIS)

    Jung, Chung Yeong

    2000-08-01

    This book includes basic concept of production management, production system, strategy and mission of production, decision of production management, operation of decision making, life cycle of items and development, value of productions, design for reliability of productions, equipment layout and manufacturing process, quantitative forecast, schedule plan, inventory system, concept, input and output of MRP, Montekalo simulation, quality management, and automation system.

  16. Product Service Systems

    DEFF Research Database (Denmark)

    Departing from Product Development models based on physical artefacts. Moving towards integrated Product Development and System Operations models suited Product/Service-systems......Departing from Product Development models based on physical artefacts. Moving towards integrated Product Development and System Operations models suited Product/Service-systems...

  17. Metagenomics unveils the attributes of the alginolytic guilds of sediments from four distant cold coastal environments: Alginolytic guilds from cold sediments

    Energy Technology Data Exchange (ETDEWEB)

    Matos, Marina N. [Laboratorio de Microbiología Ambiental, Centro para el Estudio de Sistemas Marinos (CESIMAR, CONICET), Puerto Madryn U9120ACD Argentina; Lozada, Mariana [Laboratorio de Microbiología Ambiental, Centro para el Estudio de Sistemas Marinos (CESIMAR, CONICET), Puerto Madryn U9120ACD Argentina; Anselmino, Luciano E. [Laboratorio de Microbiología Ambiental, Centro para el Estudio de Sistemas Marinos (CESIMAR, CONICET), Puerto Madryn U9120ACD Argentina; Musumeci, Matías A. [Laboratorio de Microbiología Ambiental, Centro para el Estudio de Sistemas Marinos (CESIMAR, CONICET), Puerto Madryn U9120ACD Argentina; Henrissat, Bernard [Architecture et Fonction des Macromolécules Biologiques, CNRS, Aix-Marseille Université, Marseille 13288 France; INRA, USC 1408 AFMB, Marseille F-13288 France; Department of Biological Sciences, King Abdulaziz University, Jeddah 21589 Saudi Arabia; Jansson, Janet K. [Earth and Biological Sciences Directorate, Pacific Northwest National Laboratory, Richland WA 99352 USA; Mac Cormack, Walter P. [Instituto Antártico Argentino, Ciudad Autónoma de Buenos Aires, C1064ABR, Argentina; Instituto Nanobiotec, CONICET - Universidad de Buenos Aires, Ciudad Autónoma de Buenos Aires, C1113AAC, Argentina; Carroll, JoLynn [Akvaplan-niva, Fram - High North Research Centre for Climate and the Environment, Tromsø NO-9296 Norway; CAGE - Centre for Arctic Gas Hydrate, Environment and Climate, UiT The Arctic University of Norway, Tromsø N-9037 Norway; Sjöling, Sara [School of Natural Sciences and Environmental Studies, Södertörn University, Huddinge 141 89 Sweden; Lundgren, Leif [Stockholm University, Stockholm SE-106 91 Sweden; Dionisi, Hebe M. [Laboratorio de Microbiología Ambiental, Centro para el Estudio de Sistemas Marinos (CESIMAR, CONICET), Puerto Madryn U9120ACD Argentina

    2016-07-18

    Alginates are abundant polysaccharides in brown algae that constitute an important energy source for marine heterotrophic bacteria. Despite the key role of alginate assimilation processes in the marine carbon cycle, little information is available on the bacterial populations involved in these processes. The goal of this work was to gain insight into the structure and functional traits of the alginolytic communities from sediments of cold coastal environments. Sediment metagenomes from high-latitude regions of both Hemispheres were interrogated for alginate lyase gene homolog sequences and their genomic context. Sediments contained highly abundant and diverse bacterial assemblages with alginolytic potential, including members of Bacteroidetes and Proteobacteria, as well as several poorly characterized taxa. Temperature and salinity were correlated to the variation in community structure. The microbial communities in Arctic and Antarctic sediments exhibited the most similar alginolytic profiles, whereas brackish sediments had a higher proportion of novel members. Examination of the gene context of the alginate lyase homologs revealed distinct patterns according to the phylogenetic origin of the scaffolds, with evidence of evolutionary relationships among lineages. This information is relevant for understanding carbon fluxes in cold coastal environments and provides valuable information for the development of biotechnological applications from brown algae biomass.

  18. Production monitoring system for understanding product robustness

    DEFF Research Database (Denmark)

    Boorla, Srinivasa Murthy; Howard, Thomas J.

    2016-01-01

    study is used to demonstrate how the monitoring system can be used to efficiently guide corrective action to improve product performance. It is claimed that the monitoring system can be used to dramatically cut the time taken to identify, planand execute corrective action related to typical quality......In the current quality paradigm, the performance of a product is kept within specification by ensuring that its parts are within specification. Product performance is then validated after final assembly. However, this does not control how robust the product performance is, i.e. how much...... it will vary between the specification limits. In this paper, a model for predicting product performance is proposed, taking into account design, assembly and process parameters live from production. This empowers production to maintain final product performance, instead of part quality. The PRECI‐IN case...

  19. Productivity and Performance Measurement

    DEFF Research Database (Denmark)

    Hald, Kim Sundtoft; Spring, Martin

    This study explores conceptually how performance measurement as discussed in the literature, enables or constrains the ability to manage and improve productivity. It uses an inter-disciplinary literature review to identify five areas of concern relating productivity accounting to the ability...... to improve productivity: “Productivity representation”; “productivity incentives”, “productivity intervention”; “productivity trade-off or synergy” and “productivity strategy and context”. The paper discusses these areas of concern and expands our knowledge of how productivity and performance measurement...

  20. Product Structure, the Heart of Product Definition

    Science.gov (United States)

    DeHoog, C., Jr.

    1999-01-01

    This paper describes the LMMSS Product Definition System (PDS) philosophy and approach were the use of each item parts document or software can be traced to a specific end item (EI) serial/tail number of the product. It explains why a part-oriented approach to data organization and configuration management is required. The definition of part-oriented is that all appropriate product definition data products will be collected. Referenced and managed by their linkage/relationship to parts/items, The paper will touch upon how LMMSS store/controls product definition information under each project's top product designator in a two tiered approach. One tier for each product end item and another tier which contain/controls listings of drawings, documents. Specifications and standards that are required for hardware item definition.

  1. Heavy Flavour Production

    CERN Document Server

    Nason, Paolo; Ridolfi, Giovanni

    1995-01-01

    We review the status of heavy flavour production in QCD. Comparison of experimental and theoretical results for top and bottom production are given. Selected topics in charm production are also discussed.

  2. Animal Product Safety Information

    Science.gov (United States)

    ... Home Animal & Veterinary Safety & Health Product Safety Information Product Safety Information Share Tweet Linkedin Pin it More ... to report adverse experiences with veterinary drugs. Additional Product Information Questions and Answers: Evanger’s Dog and Cat ...

  3. Urinary incontinence products

    Science.gov (United States)

    ... this page: //medlineplus.gov/ency/article/003973.htm Urinary incontinence products To use the sharing features on this ... There are many products to help you manage urinary incontinence . You can decide which product to choose based ...

  4. COTTAGE CHEESE PRODUCTS FUNCTIONALITY

    Directory of Open Access Journals (Sweden)

    L. V. Golubeva

    2015-01-01

    Full Text Available Cottage cheese products holds a significant place among the dairy and milk-containing products. The range of products includes cheese: cheese, pastes, creams, cakes, etc. Such diversity can be attributed to their popularity among the population and benefit brought by the body from regular use. Curd protein is much better and easier to digest by the body than protein fish, meat or milk. Rich curd products lysine and methionine. Minerals contained in cheese products have a positive effect on bone formation and structure of tissues. The composition of curd products, in addition to cheese and dairy ingredients may include non-dairy ingredients origin. Today, for the production of cheese products use the most advanced technologies to further enrich its structure and significantly improve the nutritional value. Pine nut is widely used in the manufacture of many dairy products. But, in most cases, the production of dairy products as a filler used pine nut cake, which deprives the finished product valuable cedar oil. The authors proposed a technology for producing curd product with the addition of pine nuts and honey (pine nuts and fructose. Compatible with cream cheese filling insertion determined sensory organoleptic point scale. he optimum dosage of components: pine nuts – 5 %, honey – 10 % fructose – 7 %. Technological process of cottage cheese product is different from the traditional operations training components and their introduction into the finished cheese. Identify indicators of quality of the new product. Production of curd products thus expanding the range of dairy products functional orientation.

  5. STRATEGIES FOR INCREASING PRODUCTIVITY IN PRODUCTION SYSTEMS

    Directory of Open Access Journals (Sweden)

    Diego Pacheco

    2014-05-01

    Full Text Available The main objective of this article is to point a set of practical strategies that can be adopted to increase the capacity of constraints resources on production systems, when the constraint is inside the factory and not is in the market. To serve this purpose will be presented strategies based on best practices of the Theory of Constraints, Lean Manufacturing and Total Productive Maintenance. This article also presents the mains tools for the deployment of these methodologies. The survey results have provided an objective set of practical strategy that can be used to increase the capacity and productivity of production systems according to the needs of each manufacturing system.

  6. PDT (Product Data Technology), Production and Society

    DEFF Research Database (Denmark)

    Vesterager, Johan

    1997-01-01

    Information and communication technology (ICT) constitute a genuine technical revolution by enabling a dynamic and flexible support or automation of knowledge and information work. Bearing in mind that products are frozen knowledge, ICT as known will change the way we produce products dramatically....... The use of ICT in engineering of products constitutes product data technology (PDT).This paper presents a a basic platform for an understanding the ongoing revolution with focus on the PDT-area taking outset in the fundamental elements of knowledge and information work: creation, transformation...

  7. Animal Production Research Advances

    African Journals Online (AJOL)

    Animal Production Research Advances is a peer-review journal established expressly to promote the production of all animal species utilized as food. The journal has an international scope and is intended for professionals in animal production and related sciences. We solicit contributions from animal production and ...

  8. Intelligent products : A survey

    NARCIS (Netherlands)

    Meyer, G.G.; Främling, K.; Holmström, J.

    This paper presents an overview of the field of Intelligent Products. As Intelligent Products have many facets, this paper is mainly focused on the concept behind Intelligent Products, the technical foundations, and the achievable practical goals of Intelligent Products. A novel classification of

  9. Making Product Customization Profitable

    DEFF Research Database (Denmark)

    Mortensen, Niels Henrik; Hvam, Lars; Haug, Anders

    2010-01-01

    The main result presented in this paper is the Framework for Product Family Master Plan. This framework supports the identification of a product architecture for companies that customize products and services. The framework has five coherent aspects, the market, product assortment, supply...

  10. Consumer Product Category Database

    Science.gov (United States)

    The Chemical and Product Categories database (CPCat) catalogs the use of over 40,000 chemicals and their presence in different consumer products. The chemical use information is compiled from multiple sources while product information is gathered from publicly available Material Safety Data Sheets (MSDS). EPA researchers are evaluating the possibility of expanding the database with additional product and use information.

  11. Ergonomic Product Design 21

    International Nuclear Information System (INIS)

    Kwon, Yeong Guk

    1996-09-01

    This book explains basic of ergonomic product design with human engineering, image engineering and strategy of that design, ergonomic industrial design, which includes product design to access the human engineering in development of new product and customer satisfaction, application technology of image engineering, industrial design of human engineering item and strategy of human engineering, a good ergonomic design. It also tells of examples of convenient design for human such as hardware product and software product in automobile, telephones for ergonomic product in the future, new goods and new technology, ergonomic product in house and office, and computers and robots in the future.

  12. Product Family Assessment

    DEFF Research Database (Denmark)

    Kvist, Morten

    their focus from single products to entire product families and try to incorporate the development of product variety into a future product family. The key is to create fit between the product design and production setup. The challenge of understanding this fit and modelling dispositional relations between...... and on the ideas of lean production, plus experiences from the industrial collaboration. The idea of waste from the lean philosophy is brought into a product variety context, and discussed in relation to product development. Verification of the model has been carried out in an industrial setting at Danfoss......This thesis reports the results of a PhD project from the Technical University of Denmark. The research has been carried out in a collaborative project with the Danish company Danfoss Automatic Controls. In the global market companies are struggling to meet customers’ expectation of products...

  13. Designing Product Families

    DEFF Research Database (Denmark)

    Pedersen, Per Erik Elgård; Miller, Thomas Dedenroth

    1998-01-01

    Manufacturing companies that operate with products aimed at different market segments and applications are experiencing an increasing demand from customers who expect products to be tailored to their exact needs rather than accepting general products based on average customer needs. This trend ha......: Variety, Design Principles, and Product Maturity.......Manufacturing companies that operate with products aimed at different market segments and applications are experiencing an increasing demand from customers who expect products to be tailored to their exact needs rather than accepting general products based on average customer needs. This trend has...... led to a new business paradigm, "mass customization", where companies strive to provide highly customized products while still maintaining the efficiency of the classical mass production enterprise. One of the key factors in mass customization has been efficient use of product platforms...

  14. Production Function Geometry with "Knightian" Total Product

    Science.gov (United States)

    Truett, Dale B.; Truett, Lila J.

    2007-01-01

    Authors of principles and price theory textbooks generally illustrate short-run production using a total product curve that displays first increasing and then diminishing marginal returns to employment of the variable input(s). Although it seems reasonable that a temporary range of increasing returns to variable inputs will likely occur as…

  15. Probiotic fermented dairy products

    OpenAIRE

    Adnan Tamime; Rajka Božanić; Irena Rogelj

    2003-01-01

    Fermented dairy products are the most popular vehicle used in theindustry for the implantation of the probiotic microflora in humans. Therefore this paper provides an overview of new knowledge on probiotic fermented dairy products. It involves historical developments, commercial probiotic microorganisms and products, and their therapeutic properties, possibilities of quality improvement of different types of newly developed fermented dairy products together with fermented goat’s milk products.

  16. Software product quality measurement

    OpenAIRE

    Godliauskas, Eimantas

    2016-01-01

    This paper analyses Ruby product quality measures, suggesting three new measures for Ruby product quality measurement tool Rubocop to measure Ruby product quality characteristics defined in ISO 2502n standard series. This paper consists of four main chapters. The first chapter gives a brief view of software product quality and software product quality measurement. The second chapter analyses object oriented quality measures. The third chapter gives a brief view of the most popular Ruby qualit...

  17. Fission products collecting devices

    International Nuclear Information System (INIS)

    Matsumoto, Hiroshi

    1979-01-01

    Purpose: To enable fission products trap with no contamination to coolants and cover gas by the provision of a fission products trap above the upper part of a nuclear power plant. Constitution: Upon fuel failures in a reactor core, nuclear fission products leak into coolants and move along the flow of the coolants to the coolants above the reactor core. The fission products are collected in a trap container and guided along a pipeline into fission products detector. The fission products detector monitors the concentration of the fission products and opens the downstream valve of the detector when a predetermined concentration of the fission products is detected to introduce the fission products into a waste gas processing device and release them through the exhaust pipe. (Seki, T.)

  18. BRAND - PRODUCT INTERDEPENDENCE

    Directory of Open Access Journals (Sweden)

    Tudor NISTORESCU

    2014-06-01

    Full Text Available In this paper we conceptually discussed the brands’ role in the society, the dimensions of branding and the relationship between the brand and the products. We adhere to the main ideas expressed in the literature, that the brand is more than a product. However the product is needed to render the brand tangible. The product is the magic box that delivers the brand experience. Without the product, the brand meaning would have difficulties in attracting customers. More studies are needed to investigate the brand-product relationship.

  19. Emulsified Water Products

    Directory of Open Access Journals (Sweden)

    Elif Tuğçe AKSUN

    2016-12-01

    Full Text Available Seafood is very important depending on having high protein rate and easily digestibility by human, for supply to an important part of animal protein needed. Determining the quality of emulsion-type products, emulsion stability, viscosity and gel strength properties are very important. In the production of products specified in this property emulsion; the main protein ratio and properties of raw material used while you; emulsion pH, temperature, ionic violence, mixing speed, type of fat and additives that are used as well. Previous studies show that particularly of products resulting from water emulsified chicken and goat meat emulsified product obtained from a high capacity of emulsified and compared to cattle and sheep meat is close to specifications, preparation of emulsified type products may be appropriate for the use of fish meat. Another quality parameter in the emulsified meat products, viscosity depends on the amount of meat used in direct proportion with the texture. Fish meat animals in connective tissue connective tissue in meat other butchers to rate ratio is quite low. In this respect, the fish meat produced using emulsified products viscosity according to products prepared using other meat products is quite low. Fish meat produced using emulsified fish sausage products based on surimi, sausage and fish pate fish varieties classed emulsion type products. In this review the different types of seafood using emulsified meat product.

  20. Micro Products - Product Development and Design

    DEFF Research Database (Denmark)

    Hansen, Hans Nørgaard

    2003-01-01

    Innovation within the field of micro and nano technology is to a great extent characterized by cross-disciplinary skills. The traditional disciplines like e.g. physics, biology, medicine and engineering are united in a common development process that can only take place in the presence of multi......-disciplinary competences. One example is sensors for chemical analysis of fluids, where chemistry, biology and flow mechanics all influence the design of the product and thereby the industrial fabrication of the product [1]. On the technological side the development has moved very fast, primarily driven by the need...... of the electronics industry to create still smaller chips with still larger capacity. Therefore the manufacturing technologies connected with micro/nano products in silicon are relatively highly developed compared to the technologies used for manufacturing micro products in metals, polymers and ceramics. For all...

  1. Productivity and Competitiveness of Sorghum Production in ...

    African Journals Online (AJOL)

    showed that sorghum production in the study areas yielded profitable returns ... Keywords: Sorghum, Profitability, Competitiveness, Investment Potential, .... Guinness Ghana Brewery Limited to estimate cost and returns at the marketing sector ...

  2. Product line design

    Czech Academy of Sciences Publication Activity Database

    Anderson, S. P.; Celik, Levent

    2015-01-01

    Roč. 157, May (2015), s. 517-526 ISSN 0022-0531 Institutional support: RVO:67985998 Keywords : product line design * product differentiation * second-degree price discrimination Subject RIV: AH - Economics Impact factor: 1.097, year: 2015

  3. Advances in production technology

    CERN Document Server

    2015-01-01

    This edited volume contains the selected papers presented at the scientific board meeting of the German Cluster of Excellence on “Integrative Production Technology for High-Wage Countries”,  held in November 2014. The topical structure of the book is clustered in six sessions: Integrative Production Technology, Individualised Production, Virtual Production Systems, Integrated Technologies, Self-Optimising Production Systems and Human Factors in Production Technology. The Aachen perspective on a holistic theory of production is complemented by conference papers from external leading researchers in the fields of production, materials science and bordering disciplines. The target audience primarily comprises research experts and practitioners in the field but the book may also be beneficial for graduate students.

  4. Transformer Industry Productivity Slows.

    Science.gov (United States)

    Otto, Phyllis Flohr

    1981-01-01

    Annual productivity increases averaged 2.4 percent during 1963-79, slowing since 1972 to 1.5 percent; computer-assisted design and product standardization aided growth in output per employee-hour. (Author)

  5. Phenomenology of lepton production

    International Nuclear Information System (INIS)

    Renard, F.M.

    1976-06-01

    The problem of lepton production in hadronic collisions is reviewed. The following subjects are developed: the Drell-Yan model for continuous l + l - production, vector mesons and clusters, and other sources of direct leptons [fr

  6. Pesticide Product Label System

    Data.gov (United States)

    U.S. Environmental Protection Agency — The Pesticide Product Label System (PPLS) provides a collection of pesticide product labels (Adobe PDF format) that have been approved by EPA under Section 3 of the...

  7. Dictionaries for text production

    DEFF Research Database (Denmark)

    Fuertes-Olivera, Pedro; Bergenholtz, Henning

    2018-01-01

    Dictionaries for Text Production are information tools that are designed and constructed for helping users to produce (i.e. encode) texts, both oral and written texts. These can be broadly divided into two groups: (a) specialized text production dictionaries, i.e., dictionaries that only offer...... a small amount of lexicographic data, most or all of which are typically used in a production situation, e.g. synonym dictionaries, grammar and spelling dictionaries, collocation dictionaries, concept dictionaries such as the Longman Language Activator, which is advertised as the World’s First Production...... Dictionary; (b) general text production dictionaries, i.e., dictionaries that offer all or most of the lexicographic data that are typically used in a production situation. A review of existing production dictionaries reveals that there are many specialized text production dictionaries but only a few general...

  8. Household Products Database: Pesticides

    Science.gov (United States)

    ... of Products Manufacturers Ingredients About the Database FAQ Product ... control bulbs carpenter ants caterpillars crabgrass control deer dogs dogs/cats fertilizer w/insecticide fertilizer w/weed ...

  9. Consumer Product Category Database

    Data.gov (United States)

    U.S. Environmental Protection Agency — The Chemical and Product Categories database (CPCat) catalogs the use of over 40,000 chemicals and their presence in different consumer products. The chemical use...

  10. Globalization and Productivity

    DEFF Research Database (Denmark)

    Hayakawa, Kazunobu; Machikita, Tomohiro

    2012-01-01

    Recent empirical studies which utilize plant- or establishment-level data to examine globalization's impact on productivity have discovered many causal mechanisms involved in globalization's impact on firms’ productivity. Because these pathways have been broad, there have been few attempts...

  11. Production sharing agreements

    International Nuclear Information System (INIS)

    1994-01-01

    This paper, which was presented at the Production Sharing Agreement seminar, discusses economic rent, negotiations, trends in fiscal system development, and concessionary systems. Production sharing contracts, risk service contracts, joint ventures and the global market are examined. (UK)

  12. Alcohol production from whey

    Energy Technology Data Exchange (ETDEWEB)

    Reesen, L

    1978-01-01

    The continuous production of ethanol from whey permeate, by fermentation of its lactose with Kluyveromyces fragilis, is described. From whey containing 4.4% lactose, production costs were very competitive with those for alcohol from molasses.

  13. National pulpwood production, 2010

    Science.gov (United States)

    Ronald J. Piva; James W. Bentley; Steven W. Hayes

    2014-01-01

    U.S. pulpwood production amounted to 86.5 million cords in 2010, a decrease of 4 percent from 2008. Roundwood production totaled 65.7 million cords and accounted for 76 percent of the Nation's total pulpwood production. The Southern Region led the Nation in total production with 65.5 million cords, followed by the Northern Region with 12.8 million cords, and the...

  14. National pulpwood production, 2008

    Science.gov (United States)

    Tony G. Johnson; Ronald J. Piva; Brian F. Walters; al. et.

    2011-01-01

    United States’ pulpwood production amounted to 89.2 million cords in 2008. Roundwood production totaled 63.0 million cords and accounted for 71 percent of the Nation’s total pulpwood production. The use of wood residue totaled 26.2 million cords. Georgia led the Nation in total production, with 11.6 million cords. In 2008, 146 mills were operating and drawing wood from...

  15. Southern pulpwood production, 2007

    Science.gov (United States)

    Tony G. Johnson; Carolyn D. Steppleton; James w. Bentley

    2009-01-01

    The South’s production of pulpwood increased from 64.7 million cords in 2006 to 65.7 million cords in 2007. Roundwood production increased 1.2 million cords to 47.6 million cords and accounted for 72 percent of the total pulpwood production. The use of wood residue declined 1 percent to 18.2 million cords. Alabama led the South in total production at 10.6 million cords...

  16. Nordic Noir Production Values

    DEFF Research Database (Denmark)

    Waade, Anne Marit; Jensen, Pia Majbritt

    2013-01-01

    In this article the authors argue that Nordic noir constitutes a set of production values utilised and conceptualised to make Danish television series attractive in the international market. The idea of production values is embedded into a media industrial context where market principles of target...... by relating the specific Nordic noir production values present in the two series to changing conditions in Danish television drama production, in particular the internationalisation of DR’s Drama Division....

  17. Structure, specificity, and evolution of insect guilds related to cones of conifers in Western Europe

    Science.gov (United States)

    Alain Roques

    1991-01-01

    Patchy and ephemeral resources, such as the cones of conifers, can be very useful in the study of plant-insect relationships. Studies of such relationships in forest entomology are typically complicated by the spatial and temporal characteristics of the host plants, which occur over vast areas and have lifespans of decades or even centuries. The reproductive structures...

  18. Effects of decomposition on carcass attendance in a guild of carrion-breeding flies.

    Science.gov (United States)

    Archer, M S; Elgar, M A

    2003-09-01

    Many forensically important calliphorids, sarcophagids and muscids (Diptera) oviposit or larviposit on corpses only during the early stages of decomposition, yet individuals may attend bodies throughout decay. A field study was conducted to investigate how patterns of carcass use and attendance by some fly species are affected by decomposition. Five fly traps were placed in the forest and baited with whole, fresh piglet carcasses. Piglets decomposed in traps throughout the experiment, and all were skeletonized within 6 days. Flies were trapped at both early and late decomposition stages, and the species and population structures of trap catches were compared. More flies attended carcasses early rather than late in decay. For all species, flies attending early were mainly gravid females, but few gravid females attended late in decay. No females ovi- or larviposited late in decay, whereas females of all fly species deposited offspring early in decay. The number of males trapped of each species correlated positively with the number of females with eggs at early development stages. Observations were made of fly predation by European wasps Vespula germanica Fabricius (Hymenoptera, Vespidae) and jumper ants Myrmecia pilosula Smith (Hymenoptera, Formicidae) throughout the experiment. There was a higher risk for smaller fly species of being killed following predator attack. Ants and wasps attacked smaller fly species, whereas only wasps attacked larger fly species.

  19. Inter and intra-guild interactions in egg parasitoid species of the soybean stink bug complex

    Directory of Open Access Journals (Sweden)

    Sujii Edison Ryoiti

    2002-01-01

    Full Text Available The objective of this research was to evaluate the parasitism behavior of Telenomus podisi Ashmead, Trissolcus basalis (Wollaston e Trissolcus urichi Crawford (Hymenoptera: Scelionidae on eggs of Nezara viridula L., Euschistus heros F., Piezodorus guildinii Westwood and Acrosternum aseadum Rolston (Heteroptera: Pentatomidae, in no choice and multiple choice experiments. For all parasitoid species, the results demonstrated the existence of a main host species that maximizes the reproductive success. The competitive interactions among the parasitoid species were investigated in experiments of sequential and simultaneous release of different combinations of parasitoid pairs on the hosts N. viridula, E. heros and A. aseadum. Exploitative competition was observed for egg batches at the genus level (Telenomus vs. Trissolcus and interference competition at the species level (T. basalis vs. T. urichi. Trissolcus urichi was the most aggressive species, interfering with the parasitism of T. basalis. Generally, T. basalis showed an opportunistic behavior trying to parasitise eggs after T. urichi had abandoned the egg batch. The selection of parasitoid species for use in augmentative biological control programs should take into account the diversity of pentatomids present in soybean in addition to the interactions among the different species of parasitoids.

  20. Breeding biology and bee guild of Douglas' dustymaiden, Chaenactis douglasii (Asteraceae, Helenieae)

    Science.gov (United States)

    James H. Cane; Byron Love; Katharine Swoboda

    2012-01-01

    Douglas' dustymaiden, Chaenactis douglasii (Hook.) Hook. & Arn., is a widespread, inconspicuous, short-lived perennial wildflower that blooms in early summer and is found in basin sagesteppe to upper montane areas throughout the U.S. Intermountain West. The species is proving practical to grow for seed and is expected to be used for western rangeland...

  1. Recovering corporate memory. Wine porters’ guilds and religious traditions in pre-industrial northern Italy

    Directory of Open Access Journals (Sweden)

    Miguel Laborda-Pemán

    2016-09-01

    Full Text Available Review of: Lester K. Little, Indispensable immigrants: The wine porters of northern Italy and their saint, 1200-1800, Manchester, Manchester University Press, 2015, 229 p., ISBN: 978071909522, £ 70.00.

  2. Species loss, delayed numerical responses, and functional compensation in an antbird guild.

    Science.gov (United States)

    Touchton, Janeene M; Smith, James N M

    2011-05-01

    When a community loses species through fragmentation, its total food consumption may drop. Compensatory responses of remaining species, whereby survivors assume roles of extinct competitors, may reduce the impact of species loss through numerical or functional responses. We measured compensatory responses in two remaining antbird species on Barro Colorado Island, Panama, four decades after the loss of their dominant competitor, the Ocellated Antbird, Phaenostictus mcleannani. We compared current abundances and behavior of these two species on Barro Colorado to those reported before the island lost Ocellated Antbirds, and to those in a nearby mainland population where all three species still exist as a space-for-time substitution. The smaller, more subordinate Spotted Antbird, Hylophylax naevioides, responded far more strongly than the larger Bicolored Antbird, Gymnopithys leucaspis, which is functionally more like the Ocellated Antbird. Islandwide density of Spotted Antbirds has more than doubled since the loss of Ocellated Antbirds. Moreover, Spotted Antbirds now spend so much more of their time following ant swarms that their metabolic biomass at these swarms has more than tripled since Ocellated Antbirds disappeared. These responses in Spotted Antbirds were apparently delayed by >20 years. Bicolored Antbirds have not increased substantially in islandwide density or metabolic biomass at ant swarms. We hypothesize that behavioral flexibility, as shown by Spotted Antbirds on Barro Colorado Island, is a major factor governing the extent to which fragmented ecosystems can buffer the impacts of species loss.

  3. Oyster condition index in Crassostrea rhizophorae (Guilding, 1828 from a heavy-metal polluted coastal lagoon

    Directory of Open Access Journals (Sweden)

    M. F. Rebelo

    Full Text Available The condition index (CI of oysters represents an ecophysiological approach to estimate meat quality and yield in cultured bivalve mollusks. In the present study, the CI of oysters from a heavy-metal polluted bay was analyzed with respect to Zn and Cd contamination in soft tissues, spawning, and polychaete infestation. The CI was calculated through a new technique based on molds made to measure the volume of oyster-shell internal cavities. The higher CI values (over 9 in the dry season were probably related availability of suspended particles rich in organic matter in the bay, while the rapid reduction in the CI from one season to the next at some stations suggests the effect of spawning. Polychaete infestation was considered low (18.7% and produced no clear CI effects. The Cd in the oyster tissue collected during the rainy season was weak, although still significantly correlated with the CI (r = -0.36; p < 0.05. All other comparisons of CI and metal concentrations demonstrated a non-significant correlation. The CI variations observed on the temporal and spatial scale were likely to have been caused by availability of organic matter and spawning, rather than spionid infestation or metal body burdens.

  4. Evaluation of the City and Guilds Level 3 Adult umeracy Support ...

    African Journals Online (AJOL)

    cce

    College also runs a number of higher education (HE) courses. ... linking this with strategies, methods and skills to teach adult numeracy learners. .... The assessment helped provide detailed learner profiles against the Level 3 specifications ...

  5. Craft Guilds and the Sustenance of Pre-Colonial Benin Monarchy ...

    African Journals Online (AJOL)

    The resilience and sustenance of the kingdom and her monarchy for this long period has been attributed to several factors such as the successive line of capable and effective Oba (kings) and her trade with the Europeans – Portuguese, Dutch and British – which enabled her to acquire arms and ammunitions for the ...

  6. Land Condition Trend Analysis Avian Database: Ecological Guild-based Summaries

    National Research Council Canada - National Science Library

    Schreiber, Eric

    1998-01-01

    Land Condition Trend Analysis (LCTA) bird database documentation capabilities often are limited to the generation of installation-wide species checklists, estimates of relative abundance, and evidence of breeding activity...

  7. Effects of green-tree retention on abundance and guild composition of corticolous arthropods

    Science.gov (United States)

    Juraj Halaj; Charles B. Halpern; Hoonbok Yi

    2009-01-01

    We studied the effects of varying levels and patterns of green-tree retention on the community composition of bark-dwelling arthropods. Arthropods were sampled with crawl traps installed on 280 live trees and 260 snags (all Douglas-fir) at three locations (experimental blocks) in the western Cascade Range of Oregon and Washington. Sampling coincided with the breeding...

  8. Bt crop effects on functional guilds of non-target arthropods: A meta-analysis (journal)

    Science.gov (United States)

    Background: Uncertainty persists over the environmental effects of genetically-engineered crops that produce the insecticidal Cry proteins of Bacillus thuringiensis (Bt). We performed meta-analyses on a modified public database to synthesize current knowledge about the effects of...

  9. Predator guild does not influence orangutan alarm call rates and combinations

    NARCIS (Netherlands)

    Lameira, A.R.; de Vries, H.; Hardus, M.E.; Hall, C.P.A.; Mitra-Setia, T.; Spruijt, B.M.; Kershenbaum, A.; Sterck, E.H.M.; van Noordwijk, M.; van Schaick, C.; Wich, S.A.

    2013-01-01

    Monkey alarm calls have shown that in the primate clade, combinatorial rules in acoustic communication are not exclusive to humans. A recent hypothesis suggests that the number of different call combinations in monkeys increases with increased number of predator species. However, the existence of

  10. Effect of land use and climate on the diversity of moth guilds with different habitat specialization

    Czech Academy of Sciences Publication Activity Database

    Kadlec, T.; Kotela, M. A. A. M.; Novák, I.; Konvička, Martin; Jarošík, Vojtěch

    2009-01-01

    Roč. 10, č. 2 (2009), s. 152-158 ISSN 1585-8553 R&D Projects: GA MŠk LC06073; GA ČR GD206/08/H049 Institutional research plan: CEZ:AV0Z50070508; CEZ:AV0Z60050516 Keywords : climate change * habitat specialization * landscape ecology Subject RIV: EH - Ecology, Behaviour Impact factor: 0.792, year: 2009

  11. Insects on plants: explaining the paradox of low diversity within specialist herbivore guilds

    Czech Academy of Sciences Publication Activity Database

    Novotný, Vojtěch; Miller, S. E.; Hrček, Jan; Baje, L.; Basset, Y.; Lewis, O. T.; Stewart, A. J. A.; Weiblen, G. D.

    2012-01-01

    Roč. 179, č. 3 (2012), s. 351-362 ISSN 0003-0147 R&D Projects: GA ČR GA206/09/0115; GA ČR GD206/08/H044; GA ČR GAP505/10/0673; GA AV ČR IAA600960712; GA MŠk LC06073; GA MŠk(CZ) LH11008; GA MŠk ME09082 Grant - others:National Science Foundation(US) DEB 9628840; National Science Foundation(US) DEB 9707928; National Science Foundation(US) DEB 0211591; National Science Foundation(US) DEB 0515678 Institutional research plan: CEZ:AV0Z50070508 Keywords : rainforest * New Guinea * host specialization Subject RIV: EH - Ecology, Behaviour Impact factor: 4.552, year: 2012 http://www.entu.cas.cz/png/NovotnyEtAlAMNAT2012.pdf

  12. Effects of habitat management on different feeding guilds of herbivorous insects in cacao agroforestry systems.

    Science.gov (United States)

    Novais, Samuel M A; Macedo-Reis, Luiz E; DaRocha, Wesley D; Neves, Frederico S

    2016-06-01

    Human pressure on natural habitats increases the importance of agroforests for biodiversity conservation. The objective of this study was to evaluate the role of cacao traditional cultivation system (CTCS) on the conservation of the herbivorous insect community when compared with a monodominant rubber agroforest, a type of agricultural system for cacao cultivation. The insects were sampled in three habitats in Southeastern Bahia, Brazil: native forests, CTCS and rubber agroforests. In each habitat, 18 plots of 10 m2 were established, and the structural measures were collected and herbivorous insects were sampled with a Malaise/window trap. The diversity of folivorous decreased with the simplification of vegetation structure, but species composition was similar among habitats. In addition to a decrease in the availability of resources in monodominant rubber agroforests, the latex present in these systems have limited the occurrence of species that cannot circumvent latex toxicity. The diversity of sap-sucking insects was similar among habitats, but species composition was similar only in the CTCS and native forest, and it was different in the rubber agroforest. We observed turnover and a higher frequency of individuals of the family Psyllidae in the rubber agroforest. The biology and behavior of Psyllids and absence of natural enemies enable their diversity to increase when they are adapted to a new host. We observed a shift in the composition of xylophagous insects in the rubber agroforest compared to that in other habitats. Moreover, this agroforest has low species richness, but high individual abundance. Latex extraction is likely an important additional source of volatile compounds discharged into the environment, and it increases the attraction and recruitment of coleoborers to these sites. We concluded that CTCS has an herbivorous insect community with a structure similar to the community found in native forests of the region, and they present a more interesting conservation strategy when compared to rubber agroforests. We also emphasized the potential risk of local pest outbreaks in rubber agroforests for both the rubber and associated cacao trees.

  13. Effects of habitat management on different feeding guilds of herbivorous insects in cacao agroforestry systems

    OpenAIRE

    Novais, Samuel M. A.; Macedo-Reis, Luiz E.; DaRocha, Wesley D.; Neves, Frederico S.

    2016-01-01

    AbstractHuman pressure on natural habitats increases the importance of agroforests for biodiversity conservation. The objective of this study was to evaluate the role of cacao traditional cultivation system (CTCS) on the conservation of the herbivorous insect community when compared with a monodominant rubber agroforest, a type of agricultural system for cacao cultivation. The insects were sampled in three habitats in Southeastern Bahia, Brazil: native forests, CTCS and rubber agroforests. In...

  14. Effects of changes in plant species richness and community traits on carabid assemblages and feeding guilds

    NARCIS (Netherlands)

    Harvey, J.A.; Putten, van der W.H.; Turin, H.; Wagenaar, R.; Bezemer, T.M.

    2008-01-01

    Experiments were conducted between 2001 and 2003 in constructed plant communities that were set up in 1996 on abandoned agricultural land. The primary aim of the experiment was to study how different secondary vegetation succession scenarios influence community development of invertebrates in

  15. Food resource and temporal partitioning amongst a guild of predatory agroecosystem - inhabiting ant species

    Directory of Open Access Journals (Sweden)

    Vivek Mohan AGARWAL, Neelkamal RASTOGI

    2009-10-01

    Full Text Available Prey diversity and temporal foraging patterns of six abundant, predatory ant species were investigated seasonally in an agroecosystem with two main vegetable crops. Pheidole sp. demonstrated the highest predation success and therefore appears to be the dominant species while Tapinoma melanocephalum showed the lowest success under the natural field conditions. Investigation of prey diversity and temporal activity patterns with the null model tests of niche overlap revealed a significant overlap indicating that the activity periods and prey diversity may not be solely influenced by interactions among the co-existing ant species. However, niche partitioning in the daily peak activity periods was demonstrated during all the three seasons (summer, rainy and winter particularly between Pheidole sp. and T. melanocephalum. Pheidole sp. exhibited a high intensity, broadly extended mono-modal foraging pattern. Camponotus compressus and C. paria showed bi-modality in their foraging activity during the rainy season and mono-modal patterns during summer and winter seasons. Pachycondyla tesserinoda, Tetramorium sp. and T. melanocephalum exhibited peak foraging activities in the morning hours during the summer and rainy seasons. The activity profiles of C. compressus and T. melanocephalum were skewed towards late afternoon hours during the winter season indicating avoidance of foraging activity during the favourable periods when the more aggressive Pheidole sp. is active. In the sponge gourd agroecosystem, the ants captured predominantly hymenopteran, orthopteran and coleopteran insects. While Pheidole sp. hunted mainly the large orthopteran prey, other ant species captured worker ants in the sponge gourd agroecosystem. In the cauliflower agroecosystem, while other species captured prey chiefly belonging to six orders, i.e., Lepidoptera, Hymenoptera, Coleoptera, Hemiptera, Isoptera and Diptera, Pheidole sp. was the only species to also hunt orthopteran prey. The agroecosystem-inhabiting ant species prey on a large number and wide variety of insect herbivores as evident from the differences in the peak foraging times and the proportion of each type of prey hunted. Overall, our results indicate that the structure of agroecosystem-inhabiting ant assemblage may be influenced by a variety of factors including competition, temporal heterogeneities, prey availability and its characteristics such as size and mobility [Current Zoology 55 (5 : –, 2009].

  16. Foraging behavior and prey interactions by a guild of predators on various lifestages of Bemisia tabaci

    Directory of Open Access Journals (Sweden)

    James R. Hagler

    2004-01-01

    Full Text Available The sweetpotato whitefly, Bemisia tabaci (Gennadius is fed on by a wide variety of generalist predators, but there is little information on these predator-prey interactions. A laboratory investigation was conducted to quantify the foraging behavior of the adults of five common whitefly predators presented with a surfeit of whitefly eggs, nymphs, and adults. The beetles, Hippodamia convergens Guérin-Méneville and Collops vittatus (Say fed mostly on whitefly eggs, but readily and rapidly preyed on all of the whitefly lifestages. The true bugs, Geocoris punctipes (Say and Orius tristicolor (Say preyed almost exclusively on adult whiteflies, while Lygus hesperus Knight preyed almost exclusively on nymphs. The true bugs had much longer prey handling times than the beetles and spent much more of their time feeding (35-42% than the beetles (6-7%. These results indicate that generalist predators vary significantly in their interaction with this host, and that foraging behavior should be considered during development of a predator-based biological control program for B. tabaci.

  17. Diatom feeding across trophic guilds in tidal flat nematodes, and the importance of diatom cell size

    Science.gov (United States)

    Moens, Tom; Vafeiadou, Anna-Maria; De Geyter, Ellen; Vanormelingen, Pieter; Sabbe, Koen; De Troch, Marleen

    2014-09-01

    We examine the capacity of nematodes from three feeding types (deposit feeder, epistrate feeder, predator) to utilize microphytobenthos (MPB), and assess whether diatom cell size and consumer body size are important drivers of their feeding. We analyzed natural stable isotope ratios of carbon and nitrogen in abundant nematode genera and a variety of carbon sources at an estuarine intertidal flat. All nematodes had δ13C indicating that MPB is their major carbon source. δ15N, however, demonstrated that only one deposit and one epistrate feeder genus obtained most of their carbon from direct grazing on MPB, whereas other deposit feeders and predators obtained at least part of their carbon by predation on MPB grazers. We then performed a microcosm experiment in which equal cell numbers of each of three differently sized strains of the pennate diatom Seminavis were offered as food to four, one and one genera of deposit feeders, epistrate feeders and predators, respectively. Previous studies have shown that all but the epistrate feeder ingest whole diatoms, whereas the epistrate feeder pierces cells and sucks out their contents. Most genera showed markedly higher carbon absorption from medium and large cells than from small ones. When considering the number of cells consumed, however, none of the nematodes which ingest whole cells exhibited a clear preference for any specific diatom size. The epistrate feeder was the smallest nematode taxon considered here, yet it showed a marked preference for large cells. These results highlight that the feeding mechanism is much more important than consumer size as a driver of particle size selection in nematodes grazing MPB.

  18. Pomegranate production and marketing

    Science.gov (United States)

    This book is relatively short, with 134 pages, 15 chapters, 52 figures, and 20 tables. It ranges from cultivar descriptions, production, biotic and abiotic challenges to production, to postharvest, aril and juice production, health benefits, and international trade. It contains great information and...

  19. Reconstituted products from oak

    Science.gov (United States)

    W. C. Lewis; B. G. Heebink

    1971-01-01

    "Reconstituted" describes a family of panel products made from fractionated oak, bonded with either a synthetic resin or a natural lignin bond. Several current commercial fiber panel products from oak are described, and the status of research on experimental products and processes is presented. Recent technological developments are removing the stigma...

  20. Scenario based product design

    NARCIS (Netherlands)

    Tideman, M.

    2008-01-01

    Creating good products is not an easy thing to do. There are usually many different people who have an interest in the product. People such as the user, of course, but also marketing managers, production engineers, maintenance workers, recycling specialists, and government representatives, just to

  1. Age, Wage and Productivity

    NARCIS (Netherlands)

    van Ours, J.C.; Stoeldraijer, L.

    2010-01-01

    Previous empirical studies on the effect of age on productivity and wages find contradicting results. Some studies find that if workers grow older there is an increasing gap between productivity and wages, i.e. wages increase with age while productivity does not or does not increase at the same

  2. Polling, production & priorities

    NARCIS (Netherlands)

    Winands, E.M.M.

    2007-01-01

    Polling, Production & Priorities The present monograph focuses on the so-called stochastic economic lot scheduling problem (SELSP), which deals with the make-to-stock production of multiple standardized products on a single machine with limited capacity under random demands, possibly random setup

  3. Star Products and Applications

    OpenAIRE

    Iida, Mari; Yoshioka, Akira

    2010-01-01

    Star products parametrized by complex matrices are defined. Especially commutative associative star products are treated, and star exponentials with respect to these star products are considered. Jacobi's theta functions are given as infinite sums of star exponentials. As application, several concrete identities are obtained by properties of the star exponentials.

  4. Framework of product experience

    NARCIS (Netherlands)

    Desmet, P.; Hekkert, P.

    2007-01-01

    In this paper, we introduce a general framework for product experience that applies to all affective responses that can be experienced in human-product interaction. Three distinct components or levels of product experiences are discussed: aesthetic experience, experience of meaning, and emotional

  5. Evolving production network structures

    DEFF Research Database (Denmark)

    Grunow, Martin; Gunther, H.O.; Burdenik, H.

    2007-01-01

    When deciding about future production network configurations, the current structures have to be taken into account. Further, core issues such as the maturity of the products and the capacity requirements for test runs and ramp-ups must be incorporated. Our approach is based on optimization...... modelling and assigns products and capacity expansions to production sites under the above constraints. It also considers the production complexity at the individual sites and the flexibility of the network. Our implementation results for a large manufacturing network reveal substantial possible cost...

  6. Product Structuring, an overview

    DEFF Research Database (Denmark)

    Tichem, Marcel; Storm, Ton; Andreasen, Mogens Myrup

    1997-01-01

    .In the paper, the field of product structuring is defined and broken down into topics. For each of the topics, results of research are presented. Issues for further research are identified. The references in the paper refer to papers in the proceedings of the workshops.......This paper presents the highlights of two WDK Workshops on Product Structuring. Product structuring plays an important role in creating products which have good functional and life-cycle related properties, in design process management, and in several other company functions like production control...

  7. Productivity analysis of sunflower production in Turkey

    International Nuclear Information System (INIS)

    Semerci, A.

    2012-01-01

    In Turkey, which ranks the tenth country worldwide in the sunflower (Helianthus annuus L.) production, 55% of the production is carried out in Thrace Region. Therefore, agricultural enterprises in Thrace Region, situated in the European part of Turkey have specialized in producing sunflower, and have become the centre of vegetable oil industry in the region in terms of produced raw material. This research was conducted in 182 agricultural enterprises in 3 provinces of Thrace Region in Turkey and its objective was to determine input/output relations in sunflower production. The study indicates that the determination coefficient (r/sup 2/) derived from Cobb-Douglas production function was significant at 0.01 level and the elasticity coefficients of the variables (except chemical fertilizer) were found beta i positive in derived equation. It was determined that the variable of herbicide cost had the highest value of the marginal effectiveness coefficients and none of the variables was used at economically optimal level in the study area. When the Marginal Technical Substitution and the Price Rates were taken into consideration, it was noted that only the seed cost/hoeing cost was closest to economically optimum level (1.10). According to stepwise analysis the Land Renting Value was determined as the most important variable in sunflower production. (author)

  8. Product Platform Modeling

    DEFF Research Database (Denmark)

    Pedersen, Rasmus

    for customisation of products. In many companies these changes in the business environment have created a controversy between the need for a wide variety of products offered to the marketplace and a desire to reduce variation within the company in order to increase efficiency. Many companies use the concept...... other. These groups can be varied and combined to form different product variants without increasing the internal variety in the company. Based on the Theory of Domains, the concept of encapsulation in the organ domain is introduced, and organs are formulated as platform elements. Included......This PhD thesis has the title Product Platform Modelling. The thesis is about product platforms and visual product platform modelling. Product platforms have gained an increasing attention in industry and academia in the past decade. The reasons are many, yet the increasing globalisation...

  9. Low income product innovation

    Directory of Open Access Journals (Sweden)

    Maria Cecília Sobral

    2008-10-01

    Full Text Available At affluent markets, the literature on product development management tells us to aggregate value and technology, to differentiate products and to launch fast. And at the low-income markets? This exploratory research defines a popular product, characterizes and measures their markets in Brazil, and identifies innovation strategies for them. The results suggest that the effective strategic orientation differs from affluent markets. It includes: to enhance the auto service component; to identify and service the key functionalities to the targeted public; to standardize products and increase the production scale; to extend the product life cycle; to use convenient distribution and marketing channels; to build product images that have appeal in the popular market; to offer longer financing horizons with befittingly lower installments. Data came from market researches and general demographic census. General media published stories were used to identify companies and their strategies. And a few case studies allowed the authors a deeper exploration of the relevant themes.

  10. Chlorhexidine in cosmetic products

    DEFF Research Database (Denmark)

    Opstrup, Morten Schjørring; Johansen, Jeanne Duus; Bossi, Rossana

    2015-01-01

    or an antimicrobial agent in cosmetic products at a concentration up to 0.3%, as set by the European Cosmetics Directive (now Regulations). OBJECTIVES: To identify cosmetic product types containing chlorhexidine, and to measure the concentration of chlorhexidine in selected products. METHODS: Between February 2013...... and April 2013, we checked for chlorhexidine in cosmetic products in 14 supermarkets, one hairdressing salon and one beauty and retail store in Copenhagen, Denmark by reading the ingredient labels. The chlorhexidine concentration was measured in 10 selected products by high-performance liquid chromatography...... concentrations were 0.01-0.15%. CONCLUSIONS: We found chlorhexidine in various cosmetic product types, predominantly aimed at females, and in hair products. The measured chlorhexidine concentrations were all within the permitted limit. The relevance for allergic sensitization should be further explored....

  11. Play as productionproduction as game?

    DEFF Research Database (Denmark)

    Eichberg, Henning

    2015-01-01

    Play-related products and their export have through recent decades contributed to a certain Danish image on the world level – with Lego bricks at the commercial end and adventure playgrounds at the pedagogical end. The phenomena of toy production and play exports challenge our understanding of what...... “play” and “game” are, and of their social as well as political significance. At the municipal level, the city of Odense – “city of Hans Christian Andersen” – is branding itself as “city of play”. On the international level, Danish play-related products have expanded on the world market. In the field...... of sport, Danish sport is not just elite sport, but also organized in local associations. People meet in mass summer festivals of popular sport. Folk Academies develop sport as personal development, often in an experimental way. Street sports, parkour, play and games are promoted. Civil society is a basis...

  12. 17 CFR 229.1204 - (Item 1204) Oil and gas production, production prices and production costs.

    Science.gov (United States)

    2010-04-01

    ... production, production prices and production costs. 229.1204 Section 229.1204 Commodity and Securities... production, production prices and production costs. (a) For each of the last three fiscal years disclose... production cost, not including ad valorem and severance taxes, per unit of production. Instruction 1 to Item...

  13. Nephrotoxicity of Natural Products.

    Science.gov (United States)

    Nauffal, Mary; Gabardi, Steven

    2016-01-01

    The manufacture and sale of natural products constitute a multi-billion dollar industry. Nearly a third of the American population admit to using some form of complementary or alternative medicine, with many using them in addition to prescription medications. Most patients fail to inform their healthcare providers of their natural product use and physicians rarely inquire. Annually, thousands of natural product-induced adverse events are reported to Poison Control Centers nationwide. Natural product manufacturers are not responsible for proving safety and efficacy, as the FDA does not regulate them. However, concerns exist surrounding the safety of natural products. This review provides details on natural products that have been associated with renal dysfunction. We have focused on products that have been associated with direct renal injury, immune-mediated nephrotoxicity, nephrolithiasis, rhabdomyolysis with acute renal injury, hepatorenal syndrome, and common adulterants or contaminants that are associated with renal dysfunction. The potential for natural products to cause renal dysfunction is justifiable. It is imperative that natural product use be monitored closely in all patients. Healthcare practitioners must play an active role in identifying patients using natural products and provide appropriate patient education. © 2016 S. Karger AG, Basel.

  14. Fermentative production of isobutene.

    Science.gov (United States)

    van Leeuwen, Bianca N M; van der Wulp, Albertus M; Duijnstee, Isabelle; van Maris, Antonius J A; Straathof, Adrie J J

    2012-02-01

    Isobutene (2-methylpropene) is one of those chemicals for which bio-based production might replace the petrochemical production in the future. Currently, more than 10 million metric tons of isobutene are produced on a yearly basis. Even though bio-based production might also be achieved through chemocatalytic or thermochemical methods, this review focuses on fermentative routes from sugars. Although biological isobutene formation is known since the 1970s, extensive metabolic engineering is required to achieve economically viable yields and productivities. Two recent metabolic engineering developments may enable anaerobic production close to the theoretical stoichiometry of 1isobutene + 2CO(2) + 2H(2)O per mol of glucose. One relies on the conversion of 3-hydroxyisovalerate to isobutene as a side activity of mevalonate diphosphate decarboxylase and the other on isobutanol dehydration as a side activity of engineered oleate hydratase. The latter resembles the fermentative production of isobutanol followed by isobutanol recovery and chemocatalytic dehydration. The advantage of a completely biological route is that not isobutanol, but instead gaseous isobutene is recovered from the fermenter together with CO(2). The low aqueous solubility of isobutene might also minimize product toxicity to the microorganisms. Although developments are at their infancy, the potential of a large scale fermentative isobutene production process is assessed. The production costs estimate is 0.9 Euro kg(-1), which is reasonably competitive. About 70% of the production costs will be due to the costs of lignocellulose hydrolysate, which seems to be a preferred feedstock.

  15. Recombinant organisms for production of industrial products

    OpenAIRE

    Adrio, Jose-Luis; Demain, Arnold L

    2009-01-01

    A revolution in industrial microbiology was sparked by the discoveries of ther double-stranded structure of DNA and the development of recombinant DNA technology. Traditional industrial microbiology was merged with molecular biology to yield improved recombinant processes for the industrial production of primary and secondary metabolites, protein biopharmaceuticals and industrial enzymes. Novel genetic techniques such as metabolic engineering, combinatorial biosynthesis and molecular breeding...

  16. Leading co-production

    DEFF Research Database (Denmark)

    Tortzen, Anne

    leadership styles executed by public managers affect the quality and public value of co-production processes? The paper argues that publicly initiated co-production initiatives are influenced by conflicting governance logics placing public managers in an institutional cross pressure (Lowndes & Roberts, 2013...... of building networks and relations, developing trust and focusing on empowerment and on the participants' resources to develop innovative solutions Drawing on three qualitative case studies of ‘most likely' co-production cases in Danish municipalities, the study identifies three different leadership styles...... and increase public value (Bovaird & Löffler, 2012; Osborne, 2010). The paper argues that a deeper understanding of the dynamics of co-production can be gained from analyzing the leadership dimension of co-production processes, which has hitherto not been given much attention by co-production researchers...

  17. Product Platform Performance

    DEFF Research Database (Denmark)

    Munk, Lone

    The aim of this research is to improve understanding of platform-based product development by studying platform performance in relation to internal effects in companies. Platform-based product development makes it possible to deliver product variety and at the same time reduce the needed resources...... engaging in platform-based product development. Similarly platform assessment criteria lack empirical verification regarding relevance and sufficiency. The thesis focuses on • the process of identifying and estimating internal effects, • verification of performance of product platforms, (i...... experienced representatives from the different life systems phase systems of the platform products. The effects are estimated and modeled within different scenarios, taking into account financial and real option aspects. The model illustrates and supports estimation and quantification of internal platform...

  18. Global product development

    DEFF Research Database (Denmark)

    Hansen, Zaza Nadja Lee; Ahmed-Kristensen, Saeema

    2011-01-01

    Globalisation has enabled companies to globalise their product development process. Today, everything from manufacturing to R&D can be globally distributed. This has led to a more complex and disintegrated product development process. This paper investigates the impacts companies have experienced...... operational solutions to counteract the negative impacts with varying degrees of success. This paper presents a unique look into global product development through an investigation of its impact on the organisation, the product development process, and the product. Furthermore, it shows the solutions...... as a result of this, and how they have been addressed. Data was collected through case studies of five Danish multinational corporations. The findings showed that the companies experienced several challenges when they globalised their product development process. They consequently implemented various...

  19. MICROORGANISMS IN CONFECTIONERY PRODUCTS

    OpenAIRE

    Ľubomíra Juhaniaková; Miroslava Kačániová

    2011-01-01

    The aim of this work was to determine microbiological quality of confectionery products. In confectionery products microbiological parameters: coliforms bacteria, microscopic filamentous fungi and yeasts, Salmonella sp. and staphylococci were observed. The confectionery products were evaluated: Kremes - honey cube, roll Arabica, roll Rona, roll stuffed with apricot cream, honey cube, pinwheel caramel, Sachovnica cut, Zora cut and curd cake. For microbiological tests 18 samples of confectioner...

  20. Southern pulpwood production, 2008

    Science.gov (United States)

    Tony G. Johnson; Carolyn D. Steppleton; James W. Bentley

    2010-01-01

    The South’s production of pulpwood increased from 65.7 million cords in 2007 to 67.0 million cords in 2008. Roundwood production increased by 1.2 million cords to 48.8 million cords and accounted for 73 percent of the South’s total pulpwood production. The use of wood residue remained stable at 18.2 million cords. Georgia led the South...

  1. Southern pulpwood production, 2012

    Science.gov (United States)

    James W. Bentley; Jason A. Cooper

    2015-01-01

    The South’s production of pulpwood increased from 62.7 million cords in 2011 to 63.7 million cords in 2012. Roundwood production decreased by 770,000 cords to 49.3 million cords and accounted for 78 percent of the South’s total pulpwood production. The use of wood residue dropped 15 percent to 14.4 million cords in 2012. Georgia and Alabama led the South in total...

  2. Southern pulpwood production, 2011

    Science.gov (United States)

    James W. Bentley; Carolyn D. Steppleton

    2013-01-01

    The South’s production of pulpwood declined from 65.5 million cords in 2010 to 62.7 million cords in 2011. Roundwood production decreased by 878,000 cords to 50.1 million cords and accounted for 80 percent of the South’s total pulpwood production. The use of wood residue dropped 14 percent to 12.6 million cords in 2011. Georgia and Alabama led the South in total...

  3. Electricity production of Slovakia

    International Nuclear Information System (INIS)

    Czodor, T.

    2003-01-01

    Here is examined the spatial structure of electric energy production divided in hydropower plants (through-flow and re-pumping), thermal power plants as the most expensive way of electric energy production and nuclear power plants where high difficulty and long-term realisation of construction projects and spent financial resources are pointed out. Work describes present structure of electric energy production and consumption and refers to alternative electric energy sources

  4. Working Hours and Productivity

    OpenAIRE

    Collewet, Marion; Sauermann, Jan

    2017-01-01

    This paper studies the link between working hours and productivity using daily information on working hours and performance of a sample of call centre agents. We exploit variation in the number of hours worked by the same employee across days and weeks due to central scheduling, enabling us to estimate the effect of working hours on productivity. We find that as the number of hours worked increases, the average handling time for a call increases, meaning that agents become less productive. Th...

  5. Productivity in Public Services

    OpenAIRE

    Helen Simpson

    2007-01-01

    This paper discusses issues arising in the measurement of productivity in public services. Compared to measuring productivity in the private sector difficulties arise because the output of public services is often un-priced and because some public services are consumed collectively. A key problem is measuring the full range of outputs and quality improvements delivered by public sector organisations that are valued by society. Without comprehensive measures of output productivity statistics m...

  6. Ionization of food products

    International Nuclear Information System (INIS)

    Vasseur, J.P.

    1991-01-01

    After general remarks on foods preservation, on international works and on ionization future prospects, main irradiation sources are described. Recalls on radioactivity, on radiation-matter interaction, on toxicology of ionized foods and on ionized foods detection are given. Ionization applications to various products are reviewed, especially in: - Poultry meat - Fishing products - Fresh fruits and vegetables - Dry fruits and vegetables - spices, tea, infusion - prepacked products... An evaluation of economics and sociocultural impacts is presented in connection with recent experiments [fr

  7. Accounting for productivity

    DEFF Research Database (Denmark)

    Aiyar, Shekhar; Dalgaard, Carl-Johan Lars

    2009-01-01

    The development accounting literature almost always assumes a Cobb-Douglas (CD) production function. However, if in reality the elasticity of substitution between capital and labor deviates substantially from 1, the assumption is invalid, potentially casting doubt on the commonly held view...... that factors of production are relatively unimportant in accounting for differences in labor productivity. We use international data on relative factor shares and capital-output ratios to formulate a number of tests for the validity of the CD assumption. We find that the CD specification performs reasonably...... well for the purposes of cross-country productivity accounting....

  8. Measuring Clinical Productivity.

    Science.gov (United States)

    Hudson, Mark E; Lebovitz, Evan E

    2018-06-01

    Productivity measurements have been used to evaluate and compare physicians and physician practices. Anesthesiology is unique in that factors outside anesthesiologist control impact opportunity for revenue generation and make comparisons between providers and facilities challenging. This article uses data from the multicenter University of Pittsburgh Physicians Department of Anesthesiology to demonstrate factors influencing productivity opportunity by surgical facility, between department divisions and subspecialties within multispecialty divisions, and by individuals within divisions. The complexities of benchmarking anesthesiology productivity are demonstrated, and the potential value of creating a productivity profile for facilities and groups is illustrated. Copyright © 2018 Elsevier Inc. All rights reserved.

  9. Sustainable hydrogen production

    Energy Technology Data Exchange (ETDEWEB)

    Block, D.L.; Linkous, C.; Muradov, N.

    1996-01-01

    This report describes the Sustainable Hydrogen Production research conducted at the Florida Solar Energy Center (FSEC) for the past year. The report presents the work done on the following four tasks: Task 1--production of hydrogen by photovoltaic-powered electrolysis; Task 2--solar photocatalytic hydrogen production from water using a dual-bed photosystem; Task 3--development of solid electrolytes for water electrolysis at intermediate temperatures; and Task 4--production of hydrogen by thermocatalytic cracking of natural gas. For each task, this report presents a summary, introduction/description of project, and results.

  10. DESIGN VERSUS PRODUCT DEVELOPMENT?

    Directory of Open Access Journals (Sweden)

    Edu Grieco Mazzini Junior

    2015-03-01

    Full Text Available Design or product development? The questioning in relation to the employment of such terminology dates back to possible misconceptions regarding interpretation and approach them. Therefore, it can be stated that there are differences between these two terms? In this context, we highlight two views concerning the origin of the design. The first character creative and based on pre-industrial revolution, based on projective and methodologies directed towards the practice of designing products. And second, where design is understood as an industrial process: the development of new products includes, besides a creative procedure are developed, and symbolic formal solutions for products, but also a technical procedure based on the definition of the requirements concerning the product engineering. Is this the most widely accepted interpretation? theoretical studies were conducted from interpretations of the concept of the design proposed by the International Council of Societies of Industrial Design – ICSDI (2012, and for the characterization of the process of product development, we sought to develop an analogy between these two terminologies and can be proved that the use of one of terminology will not cause deviations of interpretation, since both deal with the life cycle of the product. The main results obtained until now the definition of design proposed by the ICSID where it is characterized as a creative activity focused on the complete life cycle of products is the more approaches of the concept of product development.

  11. The Internationalisation of Production

    DEFF Research Database (Denmark)

    Yang, Cheng; Madsen, Erik Skov

    2013-01-01

    practice is further analysed in terms of (1) general information of each case company; (2) motivation of production internationalisation of each case company; (3) limitations as SMEs to internationalise production; (4) operational activities during the internationalization; (5) benefits of joint effort......This paper mainly aims to explore how SMEs internationalise their production. Directed by this objective, a new practice adopted by five Danish SMEs to internationalise their production to China is identified, which to our knowledge has never been reported by any of the existing literature. The new...

  12. Optimizing production under uncertainty

    DEFF Research Database (Denmark)

    Rasmussen, Svend

    This Working Paper derives criteria for optimal production under uncertainty based on the state-contingent approach (Chambers and Quiggin, 2000), and discusses po-tential problems involved in applying the state-contingent approach in a normative context. The analytical approach uses the concept...... of state-contingent production functions and a definition of inputs including both sort of input, activity and alloca-tion technology. It also analyses production decisions where production is combined with trading in state-contingent claims such as insurance contracts. The final part discusses...

  13. SMART Product Innovation

    DEFF Research Database (Denmark)

    Cramer-Petersen, Claus L.; Ahmed-Kristensen, Saeema; Li, Xuemeng

    2016-01-01

    . The ambition of The Danish Industry Foundation and The Kata Foundation was to develop a method; a robust and specific approach to ensure that product innovation in Danish enterprises in practice would result in products of the highest quality, producible at lower costs and profitable at competitive prices...... products to our neighboring countries continues to suffer. The customers’ financial capacity has been reduced and cheaper products from Asia and other regions have found their way into our local markets. Competition is fierce – especially pricewise. This was the starting point for the SMART project...

  14. PRODUCT STRUCTURE DIGITAL MODEL

    Directory of Open Access Journals (Sweden)

    V.M. Sineglazov

    2005-02-01

    Full Text Available  Research results of representation of product structure made by means of CADDS5 computer-aided design (CAD system, Product Data Management Optegra (PDM system and Product Life Cycle Management Wind-chill system (PLM, are examined in this work. Analysis of structure component development and its storage in various systems is carried out. Algorithms of structure transformation required for correct representation of the structure are considered. Management analysis of electronic mockup presentation of the product structure is carried out for Windchill system.

  15. Production control system specified quality sausage products

    Directory of Open Access Journals (Sweden)

    A. V. Tokarev

    2016-01-01

    Full Text Available The problem of management of production target in technological system of production of sausages of the set quality is considered in article. Decomposition of technological system is considered. Functions of management are allocated: formation of an optimum compounding of forcemeat, expert analysis of a compounding, laboratory analysis of a compounding and its statement. Information technology of interaction of these functions is offered. The mathematical problem definition of finding of an optimum compounding meat product with use of possible substitutes of ingredients is presented. This mathematical problem is a classical linear programming problem whose solution has the standard program. Since the manufacture of the finished product are various nonlinear effects are taken into account at the present time it is practically impossible, the methodology provided in this operation "Expert analysis of the formulation" and "Laboratory analysis of the finished product." An example of calculating the optimum alternative base recipe "Sausages “Viennese with cheese”" TS 9213-010-40155161-2002. For an alternative formulation demands were made at a cost of meat, the ingredient composition, as well as the final product organoleptic and physic-chemical indicators should comply with regulatory requirements "Sausages “Viennese with cheese”" TS 9213-010-40155161-2002. Indicator acid activity (pH calculated stuffing formulation should be in the range 6.0-6.3. As a partial replacement for the main raw material have been proposed acceptable substitutes. It was necessary to calculate on the basis of the formulation "Sausages “Viennese with cheese”" TS 9213-010-40155161-2002 optimal price and quality alternative formulation. As a result of depreciation of the value of alternative stuffing recipe was 14,5 % when all of the restrictions on the consumer properties. The proposed information technology implemented in the software package "Multi

  16. Industrial production of products like petroleum

    Energy Technology Data Exchange (ETDEWEB)

    Baurier, P J.H.

    1925-02-25

    This invention has as its object a process for separating tars, oils, or gases coming from the distillation of carbonaceous materials, such as lignities or shales, to separate all other substances of the same kind and to prepare products like petroleum. The process for present consideration consists essentially in achieving simultaneously hydrogenation of the material (treated for conversion to stable products) and desulfurization of the materials showing the following characteristics: The substances to be treated are fed in the gaseous state, as vapors or pulverized and made to react at a temperature of 300 to 450/sup 0/C in the presence of excess water vapor, on divided metals capable of decomposing the water with release of hydrogen, at a temperature below 450/sup 0/C.

  17. Recombinant organisms for production of industrial products

    Science.gov (United States)

    Adrio, Jose-Luis

    2010-01-01

    A revolution in industrial microbiology was sparked by the discoveries of ther double-stranded structure of DNA and the development of recombinant DNA technology. Traditional industrial microbiology was merged with molecular biology to yield improved recombinant processes for the industrial production of primary and secondary metabolites, protein biopharmaceuticals and industrial enzymes. Novel genetic techniques such as metabolic engineering, combinatorial biosynthesis and molecular breeding techniques and their modifications are contributing greatly to the development of improved industrial processes. In addition, functional genomics, proteomics and metabolomics are being exploited for the discovery of novel valuable small molecules for medicine as well as enzymes for catalysis. The sequencing of industrial microbal genomes is being carried out which bodes well for future process improvement and discovery of new industrial products. PMID:21326937

  18. Recombinant organisms for production of industrial products.

    Science.gov (United States)

    Adrio, Jose-Luis; Demain, Arnold L

    2010-01-01

    A revolution in industrial microbiology was sparked by the discoveries of ther double-stranded structure of DNA and the development of recombinant DNA technology. Traditional industrial microbiology was merged with molecular biology to yield improved recombinant processes for the industrial production of primary and secondary metabolites, protein biopharmaceuticals and industrial enzymes. Novel genetic techniques such as metabolic engineering, combinatorial biosynthesis and molecular breeding techniques and their modifications are contributing greatly to the development of improved industrial processes. In addition, functional genomics, proteomics and metabolomics are being exploited for the discovery of novel valuable small molecules for medicine as well as enzymes for catalysis. The sequencing of industrial microbal genomes is being carried out which bodes well for future process improvement and discovery of new industrial products. © 2010 Landes Bioscience

  19. Volatile products controlling Titan's tholins production

    KAUST Repository

    Carrasco, Nathalie

    2012-05-01

    A quantitative agreement between nitrile relative abundances and Titan\\'s atmospheric composition was recently shown with a reactor simulating the global chemistry occurring in Titan\\'s atmosphere (Gautier et al. [2011]. Icarus, 213, 625-635). Here we present a complementary study on the same reactor using an in situ diagnostic of the gas phase composition. Various initial N 2/CH 4 gas mixtures (methane varying from 1% to 10%) are studied, with a monitoring of the methane consumption and of the stable gas neutrals by in situ mass spectrometry. Atomic hydrogen is also measured by optical emission spectroscopy. A positive correlation is found between atomic hydrogen abundance and the inhibition function for aerosol production. This confirms the suspected role of hydrogen as an inhibitor of heterogeneous organic growth processes, as found in Sciamma-O\\'Brien et al. (Sciamma-O\\'Brien et al. [2010]. Icarus, 209, 704-714). The study of the gas phase organic products is focussed on its evolution with the initial methane amount [CH 4] 0 and its comparison with the aerosol production efficiency. We identify a change in the stationary gas phase composition for intermediate methane amounts: below [CH 4] 0=5%, the gas phase composition is mainly dominated by nitrogen-containing species, whereas hydrocarbons are massively produced for [CH 4] 0>5%. This predominance of N-containing species at lower initial methane amount, compared with the maximum gas-to solid conversion observed in Sciamma-O\\'Brien et al. (2010) for identical methane amounts confirms the central role played by N-containing gas-phase compounds to produce tholins. Moreover, two protonated imines (methanimine CH 2NH and ethanamine CH 3CHNH) are detected in the ion composition in agreement with Titan\\'s INMS measurements, and reinforcing the suspected role of these chemical species on aerosol production. © 2012 Elsevier Inc.

  20. Questionnaire typography and production.

    Science.gov (United States)

    Gray, M

    1975-06-01

    This article describes the typographic principles and practice which provide the basis of good design and print, the relevant printing processes which can be used, and the graphic designer's function in questionnaire production. As they impose constraints on design decisions to be discussed later in the text, the various methods of printing and production are discussed first.

  1. Product line design

    Czech Academy of Sciences Publication Activity Database

    Anderson, S. P.; Celik, Levent

    2015-01-01

    Roč. 157, May (2015), s. 517-526 ISSN 0022-0531 R&D Projects: GA ČR(CZ) GA15-22540S Institutional support: PRVOUK-P23 Keywords : product line design * product differentiation * second-degree price discrimination Subject RIV: AH - Economics Impact factor: 1.097, year: 2015

  2. Training for Productivity.

    Science.gov (United States)

    Maglen, Leo; Hopkins, Sonnie; Burke, Gerald

    An exploratory study was conducted to evaluate the utility of a method to demonstrate that Australian enterprises that invest in the training of their employees gain a return from that investment through an increase in employee productivity. The method, which compares enterprise expenditure on training of personnel with labor productivity across a…

  3. Marketing Novel Fruit Products

    NARCIS (Netherlands)

    ’T Riet, Van Jonathan; Onwezen, M.C.; Bartels, Jos; Lans, Van Der I.A.; Kraszewska, Magdalena

    2016-01-01

    The purpose of this study was to compare the influence of four different marketing claims and price information on consumers’ product choices for novel fruits and novel fruit products, using a choice experiment. In total, 1,652 people in Greece (n = 400), the Netherlands (n = 419), Poland (n =

  4. Heavy-Quark Production

    CERN Document Server

    Frixione, Stefano; Nason, Paolo; Ridolfi, Giovanni

    1997-01-01

    We review the present theoretical and experimental status of heavy quark production in high-energy collisions. In particular, we cover hadro- and photoproduction at fixed target experiments, at HERA and at the hadron colliders, as well as aspects of heavy quark production in e+e- collisions at the Z0 peak.

  5. Products from cottonseed

    Energy Technology Data Exchange (ETDEWEB)

    Glushenkova,

    1977-01-01

    A review with 41 references is made on the manufacture of oil, protein, and other products from cottonseed, the effects of gossypol on protein yield and quality and technology of gossypol removal. A process eliminating thermal treatment of the kernels and permitting the production of oil, proteins, phytin, gossypol, sugar, sterols, phosphatides, tocopherols, and residual shells and bagasse is described.

  6. Productivity and energy efficiency

    Energy Technology Data Exchange (ETDEWEB)

    Lovins, H. [Rocky Mountain Inst., Snowmass, CO (United States)

    1995-12-31

    Energy efficient building and office design offers the possibility of significantly increased worker productivity. By improving lighting, heating and cooling, workers can be made more comfortable and productive. An increase of 1 percent in productivity can provide savings to a company that exceed its entire energy bill. Efficient design practices are cost effective just from their energy savings. The resulting productivity gains make them indispensable. This paper documents eight cases in which efficient lighting, heating, and cooling have measurably increased worker productivity, decreased absenteeism, and/or improved the quality of work performed. They also show that efficient lighting can measurably increase work quality by removing errors and manufacturing defects. The case studies presented include retrofit of existing buildings and the design of new facilities, and cover a variety of commercial and industrial settings. Each case study identifies the design changes that were most responsible for increased productivity. As the eight case studies illustrate, energy efficient design may be one of the least expensive ways for a business to improve the productivity of its workers and the quality of its product. (author). 15 refs.

  7. Product Placement in Cartoons

    Directory of Open Access Journals (Sweden)

    Irena Oroz Štancl

    2014-06-01

    Full Text Available Product placement is a marketing approach for integrating products or services into selected media content. Studies have shown that the impact of advertising on children and youth are large, and that it can affect their preferences and attitudes. The aim of this article is to determine the existing level of product placement in cartoons that are broadcast on Croatian television stations. Content analysis of cartoons in a period of one month gave the following results: in 30% of cartoons product placement was found; most product placement were visual ads, in 89%, however, auditory product placement and plot connection was also found. Most ads were related to toys and it is significant that even 65% of cartoons are accompanied by a large amount of products available on the Croatian market. This is the result of two sales strategies: brand licensing (selling popular cartoon characters to toys, food or clothing companies and cartoon production based on existing line of toys with the sole aim of making their sales more effective.

  8. Upgrading uncompetitive products economically

    DEFF Research Database (Denmark)

    Lu, Hua; Jensen, Christian Søndergaard

    2012-01-01

    for upgrading an uncompetitive product, and combine the solutions into a single solution. We also propose a spatial join-based solution that assumes P and T are indexed by an R-tree. Given a set of products in the same R-tree node, we derive three lower bounds on their upgrading costs. These bounds are employed...

  9. Green product innovation strategy

    NARCIS (Netherlands)

    Driessen, P.H.

    2005-01-01

    Over the last decades, companies have started to incorporate green issues in product innovation strategies. This dissertation studies green product innovation strategy, its antecedents and its outcomes. A three-stage approach is followed. In the first stage, the topic is explored and a preliminary

  10. Interleaved Product LDPC Codes

    OpenAIRE

    Baldi, Marco; Cancellieri, Giovanni; Chiaraluce, Franco

    2011-01-01

    Product LDPC codes take advantage of LDPC decoding algorithms and the high minimum distance of product codes. We propose to add suitable interleavers to improve the waterfall performance of LDPC decoding. Interleaving also reduces the number of low weight codewords, that gives a further advantage in the error floor region.

  11. Production (information sheets)

    NARCIS (Netherlands)

    2007-01-01

    Documentation sheets: Geo energy 2 Integrated System Approach Petroleum Production (ISAPP) The value of smartness 4 Reservoir permeability estimation from production data 6 Coupled modeling for reservoir application 8 Toward an integrated near-wellbore model 10 TNO conceptual framework for "E&P

  12. Spectra and strangeness production

    International Nuclear Information System (INIS)

    Miake, Yasuo.

    1990-01-01

    Particle production (π ± , K ± and p ± ) has been measured in p + A and Si + A reactions using the E802 spectrometer. The comparison of the particle production (rapidity distributions, momentum distributions, and the integrated yields ratios) between p + Be, p + Au and central Si + Au collisions and the effects of rescattering is discussed. 14 refs., 6 figs

  13. Marketing technologically advanced products

    NARCIS (Netherlands)

    Bender, Horst

    1989-01-01

    This paper calls for a merger of technology and marketing under a customer value perspective; for an enhancement of the traditional technological innovation orientation of the technology-based firm with a market thrust. It establishes technology-based products as product-service offerings that are

  14. Accelerated product development

    NARCIS (Netherlands)

    Langerak, F.; Seth, J.N.; Malhotra, N.K.

    2011-01-01

    Accelerated product development is a competitive strategy that seeks to reduce the development cycle time of new products. However, there has been little theoretical advancement and empirical model testing in the identification of the conditions under which cycle time reduction is appropriate, the

  15. Global product development

    DEFF Research Database (Denmark)

    Taylor, Thomas Paul; Ahmed-Kristensen, Saeema

    2016-01-01

    Selecting key performance indicators in conventional product development is a challenging task for project management and is compound by global product development. Informed from the findings of two in depth case studies conducted with large Danish manufacturing companies, in this paper we develo...

  16. Production process of VE

    International Nuclear Information System (INIS)

    1987-07-01

    This book tells of synopsis of production process of VE(value engineering), object selection method and establishment of target, collection of object information, design of function, write improvement suggestion, evaluation of improvement suggestion, all sorts of worksheets of production process of VE, explanation of IE, explanation of PERT.

  17. Improved wound care product

    DEFF Research Database (Denmark)

    2012-01-01

    The present invention pertains to use of sodium diacetate (NaHAc 2) as an antimicrobial agent against bacteria growing in biofilms. The aspects of the invention include a wound care product comprising sodium diacetate, a kit comprising a wound care product,and a methodof treating an infected wound....

  18. Productivity of Stream Definitions

    NARCIS (Netherlands)

    Endrullis, Jörg; Grabmayer, Clemens; Hendriks, Dimitri; Isihara, Ariya; Klop, Jan

    2007-01-01

    We give an algorithm for deciding productivity of a large and natural class of recursive stream definitions. A stream definition is called ‘productive’ if it can be evaluated continuously in such a way that a uniquely determined stream is obtained as the limit. Whereas productivity is undecidable

  19. The Productive Programmer

    CERN Document Server

    Ford, Neal

    2009-01-01

    Anyone who develops software for a living needs a proven way to produce it better, faster, and cheaper. The Productive Programmer offers critical timesaving and productivity tools that you can adopt right away, no matter what platform you use. Master developer Neal Ford details ten valuable practices that will help you elude common traps, improve your code, and become more valuable to your team.

  20. COMPETITIVE PRODUCT ADVANTAGES

    Directory of Open Access Journals (Sweden)

    Adrian MICU

    2006-01-01

    Full Text Available Cost advantages may be either internal or external. Internal economics of scope, scale, or experience, and external economies of focus or logistical integration, enable a company to produce some products at a lower cost than the competition. The coordination of pricing with suppliers, although not actually economizing resources, can improve the efficiency of pricing by avoiding the incrementalization of a supplier's nonincremental fixed costs and profit. Any of these strategies can generate cost advantages that are, at least in the short run, sustainable. Even cost advantages that are not sustainable, however, can generate temporary savings that are often the key to building more sustainable cost or product advantages later.. Even when a product's physical attributes are not readily differentiable, opportunities to develop product advantages remain. The augmented product that customers buy is more than the particular product or service exchanged. It includes all sorts of ancillary services and intangible relationships that make buying thesame product from one company less difficult, less risky, or more pleasant than buying from a competitor. Superior augmentation of the same basic product can add substantial value in the eyes of consumers, leading them to pay willingly what are often considerable price premiums.

  1. Tanzania : Productive Jobs Wanted

    OpenAIRE

    World Bank Group

    2014-01-01

    Over the past 18 months, the World Bank has been working on a comprehensive plan to address the challenge of productive jobs in Tanzania. This study represents a step towards a better understanding of how to promote job creation in Tanzania. Indeed, the growth of productive jobs is vital for alleviating poverty and promoting shared prosperity - two important goals of Tanzania's economic st...

  2. Risks of Leveraged Products

    NARCIS (Netherlands)

    A. Di Cesare (Antonio)

    2012-01-01

    textabstractLeveraged investments have become a fundamental feature of modern economies. The new financial products allow people to take greater-than-usual exposures to risk factors. This thesis analyzes several different aspects of the risks involved by some frequently used leveraged products:

  3. Quarkonia production at CDF

    International Nuclear Information System (INIS)

    Demina, R.

    1996-08-01

    We present the results of J/ψ, ψ', χ c and Υ(1S), Υ(2S), Υ(3S) production in the proton-antiproton collisions at √s = 1800 GeV measured with the CDF Detector. Contributions of different production mechanisms are discussed. 10 refs., 7 figs

  4. Optimal Product Placement.

    Science.gov (United States)

    Hsu, Chia-Ling; Matta, Rafael; Popov, Sergey V; Sogo, Takeharu

    2017-01-01

    We model a market, such as an online software market, in which an intermediary connects sellers and buyers by displaying sellers' products. With two vertically-differentiated products, an intermediary can place either: (1) one product, not necessarily the better one, on the first page, and the other hidden on the second page; or (2) both products on the first page. We show that it can be optimal for the intermediary to obfuscate a product-possibly the better one-since this weakens price competition and allows the sellers to extract a greater surplus from buyers; however, it is not socially optimal. The choice of which one to obfuscate depends on the distribution of search costs.

  5. Product Architecture Modularity Strategies

    DEFF Research Database (Denmark)

    Mikkola, Juliana Hsuan

    2003-01-01

    The focus of this paper is to integrate various perspectives on product architecture modularity into a general framework, and also to propose a way to measure the degree of modularization embedded in product architectures. Various trade-offs between modular and integral product architectures...... and how components and interfaces influence the degree of modularization are considered. In order to gain a better understanding of product architecture modularity as a strategy, a theoretical framework and propositions are drawn from various academic literature sources. Based on the literature review......, the following key elements of product architecture are identified: components (standard and new-to-the-firm), interfaces (standardization and specification), degree of coupling, and substitutability. A mathematical function, termed modularization function, is introduced to measure the degree of modularization...

  6. Thermophilic Biohydrogen Production

    DEFF Research Database (Denmark)

    Karakashev, Dimitar Borisov; Angelidaki, Irini

    2011-01-01

    Dark fermentative hydrogen production at thermophilic conditions is attractive process for biofuel production. From thermodynamic point of view, higher temperatures favor biohydrogen production. Highest hydrogen yields are always associated with acetate, or with mixed acetate- butyrate type...... fermentation. On the contrary the hydrogen yield decreases, with increasing concentrations of lactate, ethanol or propionate. Major factors affecting dark fermentative biohydrogen production are organic loading rate (OLR), pH, hydraulic retention time (HRT), dissolved hydrogen and dissolved carbon dioxide...... concentrations, and soluble metabolic profile (SMP). A number of thermophilic and extreme thermophilic cultures (pure and mixed) have been studied for biohydrogen production from different feedstocks - pure substrates and waste/wastewaters. Variety of process technologies (operational conditions...

  7. Production measurements at LHCb

    CERN Document Server

    AUTHOR|(INSPIRE)INSPIRE-00392425

    2017-01-01

    The $\\text{LHC}b$ detector, with its excellent momentum resolution and flexible trigger strategy, is ideally suited for measuring heavy quark and quarkonia production properties. In addition, the new system of forward shower counters installed upstream and downstream has begun to be used, therefore the experiment is being suited to measure central exclusive production. The $\\text{LHC}b$ measurements of inclusive and differential cross-sections of the production of $J/\\psi$ resonance and $J/\\psi$ pairs, as well bottom quarks and $Z^0$ boson, based on Run 2 datasets are summarized. Finally, results on the prompt production of open charm hadrons and the exclusive production of charmonium are discussed.

  8. Hydrogen production by Cyanobacteria

    Directory of Open Access Journals (Sweden)

    Chaudhuri Surabhi

    2005-12-01

    Full Text Available Abstract The limited fossil fuel prompts the prospecting of various unconventional energy sources to take over the traditional fossil fuel energy source. In this respect the use of hydrogen gas is an attractive alternate source. Attributed by its numerous advantages including those of environmentally clean, efficiency and renew ability, hydrogen gas is considered to be one of the most desired alternate. Cyanobacteria are highly promising microorganism for hydrogen production. In comparison to the traditional ways of hydrogen production (chemical, photoelectrical, Cyanobacterial hydrogen production is commercially viable. This review highlights the basic biology of cynobacterial hydrogen production, strains involved, large-scale hydrogen production and its future prospects. While integrating the existing knowledge and technology, much future improvement and progress is to be done before hydrogen is accepted as a commercial primary energy source.

  9. Health products inspection

    International Nuclear Information System (INIS)

    Stoltz, M.

    2009-01-01

    To protect public health, the Health Products Inspection is a public service mission where the application of regulations concerning activities on human health products and cosmetic products is verified. This mission permits a global approach to assess the health products risk-based benefit and, in monitoring by laboratory testing and by on site inspections, to verify their compliance with appropriate regulations. The seventy five inspectors perform about eight hundred inspections per year, in France and abroad. These inspections are related to data provided in the health products assessment and also to manufacturing and delivery practices. The French inspection body is also involved in the training of foreign inspectors and in the harmonization of national, European and international practices either for operators than for the competent authorities. (author)

  10. Dry alcohol production plant

    Directory of Open Access Journals (Sweden)

    Stanković Mirjana S.

    2003-01-01

    Full Text Available The IGPC Engineering Department designed basic projects for dry alcohol production plant, using technology developed in the IGPC laboratories. Several projects were completed: technological, machine, electrical, automation. On the basis of these projects a production plant with a capacity of 40 m3/y was manufactured, at "Zorka Pharma", Šabac in 1995-1996. The product meets all quality demands, as well as environmental regulations. The dry alcohol production process is fully automatized. There is no waste in the process, neither gaseous, nor liquid. The chosen process provides safe operation according to temperature regime and resistance in the pipes, air purification columns and filters. Working at increased pressure is suitable for evaporation and condensation at increased temperatures. The production process can be controlled manually, which is necessary during start-up, and repairs.

  11. Exposure from consumer products

    International Nuclear Information System (INIS)

    Sadagopan, Geetha

    1998-01-01

    Consumer products containing radioactive material, are available in the market place to any member of public as off the shelf item and are intended for unrestricted use by them at home or for their personal use. Radioactivity may be involved in the product for several reasons: 1. ionising radiation from the radioactive material forms the basis of the particular functioning of the product like radioisotopes in smoke detectors, radio-luminous dials, etc.; 2. chemical/spectroscopic characteristics of the radioactive material and not its radioactivity is the basis for the functional property of the product like thoriated gas mantles, uranium in glass enamels, etc. and 3. radioactive materials could be naturally occurring in consumer products, but could increase in concentration after processing like increased uranium or thorium concentrations after the processing of rare earth oxides

  12. Chemical Product Design

    DEFF Research Database (Denmark)

    Gani, Rafiqul

    2004-01-01

    This paper highlights for a class of chemical products, the design process, their design with respect to the important issues, the need for appropriate tools and finally, lists some of the challenges and opportunities for the process systems engineering (PSE)/computer-aided process engineering...... (CAPE) community. The chemical products considered belong to the following types: chemical/biochemical/agrochemical products, coatings and solvents, food (nutraceuticals), HIM (household, industrial and institutional), personal care, pharmaceuticals and drugs. The challenges and opportunities...... are highlighted in terms of the needs for multi-level modeling with emphasis on property models that are suitable for computer-aided applications, flexible solution strategies that are able to solve a large range of chemical product design problems and finally, a systems chemical product design framework...

  13. Petroleum product market outlook

    International Nuclear Information System (INIS)

    2005-09-01

    The influence of petroleum market disturbances on price increases was discussed with particular reference to Hurricane Katrina and the loss of refinery production and damage to oil infrastructure in the United States. The supply of petroleum products in Canada will be very tight heading into the winter of 2006, despite the fact that Canadian refineries are operating at full capacity to ensure an adequate supply of gasoline and diesel fuel for consumers. In addition to refinery production, petroleum supplies are also determined by the adequacy of inventories and the efficiency of the infrastructure in place to deliver products to where they are needed. The lack of spare capacity has reduced the flexibility of the North American refining system to respond to further disruptions. Refiners were asked to provide information on 4 areas of their operations in order for Natural Resources Canada to analyze the short-term outlook for petroleum products markets. The 4 areas included refinery utilization rates and capability to increase production; any planned refinery turnaround that would affect petroleum product supplies; inventory levels compared to levels in previous years; and, any logistical problems that could affect product distribution. A graph depicting the relationship between Canadian production of gasoline and domestic sales clearly illustrated the seasonal nature of gasoline consumption and that production in Canada is much higher than consumption. Canada exports large volumes of gasoline, primarily to the United States eastern seabord from refineries in Atlantic Canada. The trend is similar for diesel fuel. Demand for both gasoline and diesel is expected to continue to grow in 2005 as high prices have had a limited impact on demand growth. In general, the Ontario/Quebec region is short of gasoline and must import gasoline during the summer months to cover the shortfall. It was noted that motorists and homeowners who heat with oil will bear the burden of higher

  14. Greenhouse production systems for people

    NARCIS (Netherlands)

    Giacomelli, G.A.; Sase, S.; Cramer, R.; Hoogeboom, J.; McKenzie, A.; Parbst, K.; Sacrascia-Mugnozza, G.; Selina, P.; Sharp, D.A.; Voogt, J.O.; Weel, van P.A.; Mears, D.

    2012-01-01

    Environmentally sound greenhouse production requires that: demand for market products is understood; greenhouse design addresses the climate circum-stances; input resources are available and consumed efficiently, and; there must be a reasonable balance of production products to the environmental

  15. A Framework For Product Development

    DEFF Research Database (Denmark)

    McAloone, Timothy Charles; Robotham, Antony John

    1999-01-01

    -aspect approach to product development; understanding the strategic conditions that affect product development; developing a coherent approach to product quality based on product-life thinking; addressing environmental needs in a proactive manner through innovation techniques; and understanding both...

  16. Product sounds : Fundamentals and application

    NARCIS (Netherlands)

    Ozcan-Vieira, E.

    2008-01-01

    Products are ubiquitous, so are the sounds emitted by products. Product sounds influence our reasoning, emotional state, purchase decisions, preference, and expectations regarding the product and the product's performance. Thus, auditory experience elicited by product sounds may not be just about

  17. Uranium production from phosphates

    International Nuclear Information System (INIS)

    Ketzinel, Z.; Folkman, Y.

    1979-05-01

    According to estimates of the world's uranium consumption, exploitation of most rich sources is expected by the 1980's. Forecasts show that the rate of uranium consumption will increase towards the end of the century. It is therefore desirable to exploit poor sources not yet in use. In the near future, the most reasonable source for developing uranium is phosphate rock. Uranium reserves in phosphates are estimated at a few million tons. Production of uranium from phosphates is as a by-product of phosphate rock processing and phosphoric acid production; it will then be possible to save the costs incurred in crushing and dissolving the rock when calculating uranium production costs. Estimates show that the U.S. wastes about 3,000 tons of uranium per annum in phosphoric acid based fertilisers. Studies have also been carried out in France, Yugoslavia and India. In Israel, during the 1950's, a small plant was operated in Haifa by 'Chemical and Phosphates'. Uranium processes have also been developed by linking with the extraction processes at Arad. Currently there is almost no activity on this subject because there are no large phosphoric acid plants which would enable production to take place on a reasonable scale. Discussions are taking place about the installation of a plant for phosphoric acid production utilising the 'wet process', producing 200 to 250,000 tons P 2 O 5 per annum. It is necessary to combine these facilities with uranium production plant. (author)

  18. Manual of radioisotope production

    International Nuclear Information System (INIS)

    1966-01-01

    The Manual of Radioisotope Production has been compiled primarily to help small reactor establishments which need a modest programme of radioisotope production for local requirements. It is not comprehensive, but gives guidance on essential preliminary considerations and problems that may be met in the early stages of production. References are included as an aid to the reader who wishes to seek further in the extensive literature on the subject. In preparing the Manual, which is in two parts, the Agency consulted several Member States which already have long experience in radioisotope production. An attempt has been made to condense this experience, firstly, by setting out the technical and economic considerations which govern the planning and execution of an isotope programme and, secondly, by providing experimental details of isotope production processes. Part I covers topics common to all radioisotope processing, namely, laboratory design, handling and dispensing of radioactive solutions, quality control, measurement and radiological safety. Part II contains information on the fifteen radioisotopes in most common use. These are bromine-82, cobalt-58, chromium-51, copper-64, fluorine-18, gold-198, iodine-131, iron-59, magnesium-28, potassium-42, sodium-24, phosphorus-32, sulphur-35, yttrium-90 and zinc-65. Their nuclear properties are described, references to typical applications are given and published methods of production are reviewed; also included are descriptions in detail of the production processes used at several national atomic energy organizations. No attempt has been made to distinguish the best values for nuclear data or to comment on the relative merits of production processes. Each process is presented essentially as it was described by the contributor on the understanding that critical comparisons are not necessary for processes which have been well tried in practical production for many years. The information is presented as a guide to enable

  19. Sicilian potential biogas production

    Directory of Open Access Journals (Sweden)

    Antonio Comparetti

    2013-09-01

    Full Text Available This study is aimed at predicting the Sicilian potential biogas production, using the Organic Fraction of Municipal Solid Waste (OFMSW, animal manure and food industry by-products, in a region where only one biogas plant using MSW and one co-digestion plant are nowadays available. The statistical data about OFMSW, the number of animals bred in medium and large farms and the amounts of by-products of food processing industries were evaluated, in order to compute the Sicilian potential biogas and energy production. The OFMSW produced in Sicily, that is 0.8 million tons ca. per year (37% of MSW, could be used in a bio-reactor, together with other raw materials, for Anaerobic Digestion (AD process, producing biogas and “digestate”. Moreover, 3.03 million tons ca. of manure, collected in medium and large animal husbandry farms (where cows, pigs and poultry are bred, and 350 thousand tons ca. of by-products, collected in food processing industries (pomace from olive oil mills and grape marc from wineries, might be used for AD process. The Sicilian potential biogas production from the AD of the above raw materials is 170.2 millions of m3, that is equal to 1023.4 GWh of energy per year, of which 484 GWh from animal manure, 303 GWh from OFMSW and 236.4 GWh from food industry by-products. The highest biogas production is in the province of Palermo (35.6 millions of m3, Ragusa (30.8 millions of m3 and Catania (22.8 millions of m3, having a potential energy production of 213.8, 185 and 137 GWh, respectively.

  20. Concurrency in product realization

    Science.gov (United States)

    Kelly, Michael J.

    1994-03-01

    Technology per se does not provide a competitive advantage. Timely exploitation of technology is what gives the competitive edge, and this demands a major shift in the product development process and management of the industrial enterprise. `Teaming to win' is more than a management theme; it is the disciplined engineering practice that is essential to success in today's global marketplace. Teaming supports the concurrent engineering practices required to integrate the activities of people responsible for product realization through achievement of shorter development cycles, lower costs, and defect-free products.

  1. Radiation processed polysaccharide products

    International Nuclear Information System (INIS)

    Nguyen, Quoc Hien

    2007-01-01

    Radiation crosslinking, degradation and grafting techniques for modification of polymeric materials including natural polysaccharides have been providing many unique products. In this communication, typical products from radiation processed polysaccharides particularly plant growth promoter from alginate, plant protector and elicitor from chitosan, super water absorbent containing starch, hydrogel sheet containing carrageenan/CM-chitosan as burn wound dressing, metal ion adsorbent from partially deacetylated chitin were described. The procedures for producing those above products were also outlined. Future development works on radiation processing of polysaccharides were briefly presented. (author)

  2. Versioning of printed products

    Science.gov (United States)

    Tuijn, Chris

    2005-01-01

    During the definition of a printed product in an MIS system, a lot of attention is paid to the production process. The MIS systems typically gather all process-related parameters at such a level of detail that they can determine what the exact cost will be to make a specific product. This information can then be used to make a quote for the customer. Considerably less attention is paid to the content of the products since this does not have an immediate impact on the production costs (assuming that the number of inks or plates is known in advance). The content management is typically carried out either by the prepress systems themselves or by dedicated workflow servers uniting all people that contribute to the manufacturing of a printed product. Special care must be taken when considering versioned products. With versioned products we here mean distinct products that have a number of pages or page layers in common. Typical examples are comic books that have to be printed in different languages. In this case, the color plates can be shared over the different versions and the black plate will be different. Other examples are nation-wide magazines or newspapers that have an area with regional pages or advertising leaflets in different languages or currencies. When considering versioned products, the content will become an important cost factor. First of all, the content management (and associated proofing and approval cycles) becomes much more complex and, therefore, the risk that mistakes will be made increases considerably. Secondly, the real production costs are very much content-dependent because the content will determine whether plates can be shared across different versions or not and how many press runs will be needed. In this paper, we will present a way to manage different versions of a printed product. First, we will introduce a data model for version management. Next, we will show how the content of the different versions can be supplied by the customer

  3. OPEC's production policies

    International Nuclear Information System (INIS)

    Mabro, R.

    1989-01-01

    An enlightening study on the workings of OPEC its policies and practices, agreements and disagreements, and how each affects the world petroleum market. The book explores OPEC's production patterns and quota agreements and the relationship between production and pricing policies. Political compromises that have hindered OPEC production agreements and their successful implementation are covered - compromises such as concessions made to the U.A.E. and those resulting from the Gulf war. Notable historical events are cited, and a look into the future at what we can expect of OPEC in coming years concludes the study

  4. Production of Metabolites

    DEFF Research Database (Denmark)

    2011-01-01

    A recombinant micro-organism such as Saccharomyces cerevisiae which produces and excretes into culture medium a stilbenoid metabolite product when grown under stilbenoid production conditions, which expresses in above native levels a ABC transporter which transports said stilbenoid out of said...... micro-organism cells to the culture medium. The genome of the Saccharomyces cerevisiae produces an auxotrophic phenotype which is compensated by a plasmid which also expresses one or more of said enzymes constituting said metabolic pathway producing said stilbenoid, an expression product of the plasmid...

  5. Entropy Production of Stars

    Directory of Open Access Journals (Sweden)

    Leonid M. Martyushev

    2015-06-01

    Full Text Available The entropy production (inside the volume bounded by a photosphere of main-sequence stars, subgiants, giants, and supergiants is calculated based on B–V photometry data. A non-linear inverse relationship of thermodynamic fluxes and forces as well as an almost constant specific (per volume entropy production of main-sequence stars (for 95% of stars, this quantity lies within 0.5 to 2.2 of the corresponding solar magnitude is found. The obtained results are discussed from the perspective of known extreme principles related to entropy production.

  6. Property Rights and Productivity

    DEFF Research Database (Denmark)

    Newman, Carol; Tarp, Finn; Van Den Broeck, Katleen

    2015-01-01

    This paper explores the effect of land titling on agricultural productivity in Vietnam and the productivity effects of single versus joint titling for husband and wife. Using a plot-fixed-effects approach our results show that obtaining a land title is associated with higher yields, for both...... individually and jointly held titles. We conclude that there is no tradeoff between joint titling and productivity, and so joint titles are potentially an effective way to improve women’s bargaining power within the household with no associated efficiency losses....

  7. SMART product innovation

    DEFF Research Database (Denmark)

    Cramer-Petersen, Claus L.; Ahmed-Kristensen, Saeema; Li, Xuemeng

    2016-01-01

    Among the inspirations for the SMART process is “design to customer value,” where products are modified based on a thorough understanding of customers that allows product developers to eliminate features that do not affect customer satisfaction while including only the elements and functionality...... that customers really appreciate. The SMART process includes methods to understand product value for the customer and the user; analyse the cost of components and processes; combine customer value and cost reduction potentials into feasible, high-value concepts; and generate prototypes that can be tested...... with users and customers....

  8. Will marine productivity wane?

    Science.gov (United States)

    Laufkötter, Charlotte; Gruber, Nicolas

    2018-03-01

    If marine algae are impaired severely by global climate change, the resulting reduction in marine primary production would strongly affect marine life and the ocean's biological pump that sequesters substantial amounts of atmospheric carbon dioxide in the ocean's interior. Most studies, including the latest generation of Earth system models, project only moderate global decreases in biological production until 2100 (1, 2), suggesting that these concerns are unwarranted. But on page 1139 of this issue, Moore et al. (3) show that this conclusion might be shortsighted and that there may be much larger long-term changes in ocean productivity than previously appreciated.

  9. Glocalized Production: The Evolution of Global Production

    DEFF Research Database (Denmark)

    Chavez, Marianna; Bilberg, Arne

    In light of the challenges of the current globalized production model, four global Danish companies were interviewed with the purpose of exploring “glocalized production” as the new step and solution to the challenges of the “global village.” The research sought to gauge the interest on “glocalized...... production” by key managers of these companies, and test three hypotheses: that a definition could be established from “glocalization” aspects, that it will reduce supply chain complexity, and that it can affect organizational trust levels. The results are presented along with suggestions to pave the way...

  10. Product numerical range in a space with tensor product structure

    OpenAIRE

    Puchała, Zbigniew; Gawron, Piotr; Miszczak, Jarosław Adam; Skowronek, Łukasz; Choi, Man-Duen; Życzkowski, Karol

    2010-01-01

    We study operators acting on a tensor product Hilbert space and investigate their product numerical range, product numerical radius and separable numerical range. Concrete bounds for the product numerical range for Hermitian operators are derived. Product numerical range of a non-Hermitian operator forms a subset of the standard numerical range containing the barycenter of the spectrum. While the latter set is convex, the product range needs not to be convex nor simply connected. The product ...

  11. Soy production and certification

    DEFF Research Database (Denmark)

    Tomei, Julia; Semino, Stella Maris; Paul, Helena

    2010-01-01

    With the rising emphasis on biofuels as a potential solution to climate change, this paper asks whether certification schemes, developed to promote sustainable feedstock production, are able to deliver genuine sustainability benefits. The Round Table on Responsible Soy (RTRS) is a certification...... the social and environmental impacts of soybean production can be mitigated by the RTRS. It concludes that at present certification schemes are unlikely to be able to address either the institutional challenges associated with their implementation or the detrimental impacts of the additional demand generated...... scheme that aims to promote responsible soy production through the development of principles and criteria. However, can and does this initiative address the negative impacts associated with the intensive production of soy? Taking the example of soy biodiesel produced in Argentina, this paper asks whether...

  12. Productive and Unproductive Competition

    DEFF Research Database (Denmark)

    Guerra, Alice; Luppi, Barbara; Parisi, Francesco

    Conventional theories of competition classify contests as being either “productive,” when the competitive efforts generate a surplus for society, or “unproductive,” when competition generates no social surplus and merely distributes already existing resources. These two discrete categories of com...... and socially optimal levels of competition in the full range of intermediate cases, as well as in the extremum cases of destructive and super-productive competition.......Conventional theories of competition classify contests as being either “productive,” when the competitive efforts generate a surplus for society, or “unproductive,” when competition generates no social surplus and merely distributes already existing resources. These two discrete categories...... of competition create a division of real-world situations into analytical categories that fails to recognize the entire spectrum of competitive activities. Taking the existing models of productive and unproductive competition as benchmark idealizations, this paper explores the relationship between the privately...

  13. Segregation in cast products

    Indian Academy of Sciences (India)

    Unknown

    The agreement with experimental data is mostly qualitative. The paper also ... For example, a high degree of positive segregation in the central region .... solute in a cast product, important ones being: size of casting, rate of solidification, mode.

  14. Household Products Database

    Science.gov (United States)

    ... your bathroom, and on the shelves in your laundry room? Learn more about what's in these products, ... MD 20894 National Institutes of Health , Health & Human Services Customer Service: tehip@teh.nlm.nih.gov Last ...

  15. PRODUCTIVITY CHARACTERISTICS AND DEVELOPMENT ...

    African Journals Online (AJOL)

    ACSS

    2016-02-23

    Feb 23, 2016 ... The pulp and kernels of the fruit are the only by-products marketed by women and mainly girls who .... characteristics of trees and fruit involved, 30 adult hermaphrodite ..... Ethnobotanical research and traditional health care in.

  16. Smallholder pig production

    DEFF Research Database (Denmark)

    Braae, Uffe Christian; Ngowi, Helena; Johansen, Maria Vang

    2013-01-01

    A cross-sectional study was carried out in the Mbeya Region, Tanzania, with the aim of describing the distribution and diversity of ectoparasites on pigs, within confinement and free-range production systems of smallholder farms. A total of 128 farms were surveyed, with 96 practising confinement...... and 32 practising free-range production systems. The prevalence of ectoparasites on pigs within confinement and free-range production systems was 24% and 84%, respectively. Logistic regression analyses revealed that keeping pigs in a free-range system and the presence of neighbouring pigs were risk...... although highly prevalent within both production systems. Keeping pigs in a free-range system and contact with neighbouring pigs were main risk factors for the presence of ectoparasites. Confinement was highly effective as a preventive tool against hard ticks....

  17. Peanut Product Recalls

    Data.gov (United States)

    U.S. Department of Health & Human Services — This list includes human and pet food subject to recall in the United States since January 2009 related to peanut products distributed by Peanut Corporation of...

  18. Products by Glycation Process

    Directory of Open Access Journals (Sweden)

    Liliana Ortega

    2015-01-01

    Full Text Available The antioxidant properties of sweet and acid whey products were incremented by polymerization of their proteins by glycation of whey protein concentrates (WPC and their hydrolyzates (WPCH with ribose and glucose in individual experiments under similar concentration. Heating at 50°C during 20 h maximum and pH 7 and pH 9 were used in all tests. The higher activity was found in WPC glycosylates products with ribose at pH 7 and heating during 10–15 h. In comparable form, antioxidant activity in WPCH was incremented by prior hydrolysis to glycation with 25–45% of hydrolysis degree. Further functional properties of whey proteins (solubility, emulsion, and foam were also improved by the polymerization with ribose. The color of polymerized products due to Maillard reactions was associated with antioxidant activity of each compound; however comparative color in glycosylates products with glucose and ribose did not show this effect.

  19. Vegetable Production System (Veggie)

    Data.gov (United States)

    National Aeronautics and Space Administration — The Vegetable Production System (Veggie) was developed to be a simple, easily stowed, high growth volume, low resource facility capable of producing fresh vegetables...

  20. NSP Production Reports

    Data.gov (United States)

    Department of Housing and Urban Development — NSP Production Reports contain cumulative data on units assisted with NSP funds. An NSP grantee reports on the accomplishment of an activity when it meets an End...

  1. OSU Chlorophyll Bloom Product

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This product was developed for the Oregon coast based on the observed change between running 8-day composite chlorophyll-a (CHL) data obtained by the MODerate...

  2. Radioactivity in consumer products

    Energy Technology Data Exchange (ETDEWEB)

    Moghissi, A.A.; Paras, P.; Carter, M.W.; Barker, R.F. (eds.)

    1978-08-01

    Papers presented at the conference dealt with regulations and standards; general and biological risks; radioluminous materials; mining, agricultural, and construction materials containing radioactivity; and various products containing radioactive sources.

  3. Kronecker Products on Preconditioning

    KAUST Repository

    Gao, Longfei

    2013-01-01

    techniques have become increasingly popular due to their great potential on large scale computation. In this work, we present preconditioning techniques for linear systems built with tensor product basis functions. Efficient algorithms are designed

  4. Challenges in biogas production

    DEFF Research Database (Denmark)

    Rennuit, Charlotte

    2017-01-01

    Anaerobic digestion (AnD) is a sustainable process combining waste treatment, nutrient recycling and energy production which can contribute to limit climate change and environmental problems. However, in order for this technique to be more widely used, production of biogas from available wastes...... from a mixture of pig manure and other waste materials by separating the solid fraction of digestate and recycling it back to the digester. It is shown that separation and recycling of the dry matter rich solid fraction could successfully increase biogas production and a preliminary economic evaluation...... showed a potential increase of 1.9 to 6.8€ per ton of biomass treated. In the second part of this study, a biological treatment to improve energy production from wastewater sludge was investigated. Wastewater sludge was subjected to thermophilic aerobic digestion (TAD) from 2h to 5d. Increase in biogas...

  5. Proprietary policy and production

    Czech Academy of Sciences Publication Activity Database

    Jeong, Byeongju

    -, č. 287 (2006), s. 1-14 ISSN 1211-3298 Institutional research plan: CEZ:MSM0021620846 Keywords : proprietary regime * direct production * model Subject RIV: AH - Economics http://www.cerge-ei.cz/pdf/wp/Wp287.pdf

  6. Measuring multifactor productivity growth

    Czech Academy of Sciences Publication Activity Database

    Wölfl, A.; Hájková, Dana

    -, 2007/5 (2007), s. 1-45 Institutional research plan: CEZ:AV0Z70850503 Keywords : multifactor productivity growth * GDP growth * measuring Subject RIV: AH - Economics http://www.oecd.org/dataoecd/61/17/39522985.pdf

  7. Products in fusion systems

    DEFF Research Database (Denmark)

    Henke, Ellen

    2013-01-01

    We revisit the notion of a product of a normal subsystem with a p-subgroup as defined by Aschbacher (2011) [Asc11, Chapter 8]. In particular, we give a previously unknown, more transparent construction....

  8. From Environment to Production

    KAUST Repository

    Kodzius, Rimantas; Behzad, H.; Archer, John A.C.; Bajic, Vladimir B.; Gojobori, Takashi

    2014-01-01

    Using Metagenomic analysis, computational modeling, single cell and genome editing technologies, we are expressing desired microbial genes and their networks in suitable hosts for mass production of energy, food, and fine chemicals

  9. Top Production at LHCb

    CERN Multimedia

    Santana Rangel, Murilo

    2015-01-01

    Single and pair top production in the forward direction at the LHC allows for precision tests of the Standard Model. The observation of top quarks in 7 and 8 TeV data and prospects for precision measurements are shown.

  10. Processed Products Database System

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Collection of annual data on processed seafood products. The Division provides authoritative advice, coordination and guidance on matters related to the collection,...

  11. Product lifecycle management

    CERN Document Server

    Stark, John

    2016-01-01

    This third edition updates and adds to the successful second edition and gives the reader a thorough description of PLM, providing them with a full understanding of the theory and the practical skills to implement PLM within their own business environment. This new and expanded edition is fully updated to reflect the many technological and management advances made in PLM since the release of the second edition. Describing the environment in which products are developed, manufactured and supported, before addressing the Five Pillars of PLM: business processes, product data, PLM applications, Organisational Change Management (OCM) and Project Management, this book explains what Product Lifecycle Management is, and why it’s needed. The final part of the book addresses the PLM timeline, showing the typical steps and activities of a PLM project or initiative. “Product Lifecycle Management” will broaden the reader’s understanding of PLM, nurturing the skills needed to implement PLM successfully and to achi...

  12. From Environment to Production

    KAUST Repository

    Kodzius, Rimantas

    2014-04-29

    Using Metagenomic analysis, computational modeling, single cell and genome editing technologies, we are expressing desired microbial genes and their networks in suitable hosts for mass production of energy, food, and fine chemicals

  13. Food Product Dating

    Science.gov (United States)

    ... Standard Forms FSIS United States Department of Agriculture Food Safety and Inspection Service About FSIS District Offices ... Web Content Viewer (JSR 286) Actions ${title} Loading... Food Product Dating "Best if Used By" is a ...

  14. Minimum entropy production principle

    Czech Academy of Sciences Publication Activity Database

    Maes, C.; Netočný, Karel

    2013-01-01

    Roč. 8, č. 7 (2013), s. 9664-9677 ISSN 1941-6016 Institutional support: RVO:68378271 Keywords : MINEP Subject RIV: BE - Theoretical Physics http://www.scholarpedia.org/article/Minimum_entropy_production_principle

  15. Forecast Icing Product

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Forecast Icing Product (FIP) is an automatically-generated index suitable for depicting areas of potentially hazardous airframe icing. The FIP algorithm uses...

  16. Bottonium production at LEP

    International Nuclear Information System (INIS)

    Abraham, K.J.

    1989-03-01

    The production of γ ('3S 1 ) and η b ( 1 S 0 ) with two gluons from Z decay is investigated. It is found that at LEP luminosities experimental detection will hardly be feasible. (author). 9 refs.; 1 fig

  17. Current Icing Product

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Current Icing Product (CIP) is an automatically-generated index suitable for depicting areas of potentially hazardous airframe icing. The CIP algorithm combines...

  18. Acetone production by methylobacteria.

    Science.gov (United States)

    Thomson, A W; O'Neill, J G; Wilkinson, J F

    1976-09-01

    An accumulation of acetone was observed during the metabolism of ethane and products of ethane oxidation by washed suspensions of Methylosinus trichosporium OB3B. This strain possessed an acetoacetate decarboxylase and 3-hydroxybutyrate dehydrogenase, and a decline in poly-beta-hydroxybutyric acid occurred under the same conditions as acetone formation. A pathway of acetone production from poly-beta-hydroxybutyric acid via 3-hydroxybutyrate and acetoacetate was suggested.

  19. Pretreated densified biomass products

    Science.gov (United States)

    Dale, Bruce E; Ritchie, Bryan; Marshall, Derek

    2014-03-18

    A product comprising at least one densified biomass particulate of a given mass having no added binder and comprised of a plurality of lignin-coated plant biomass fibers is provided, wherein the at least one densified biomass particulate has an intrinsic density substantially equivalent to a binder-containing densified biomass particulate of the same given mass and h a substantially smooth, non-flakey outer surface. Methods for using and making the product are also described.

  20. Productivity Improvement for Engineers.

    Science.gov (United States)

    1981-08-01

    organization and the likely positions or types of work that will be required of the engineer in the future. There should therefore, be a balance of...Mall, P., Improving Total Productivity, John Wiley & Sons, New York, 1978. Miller, R.B., Participative Management-Quality of Worklife and Job Enrichment...Noyes Data Corp., Park Ridge, N.J., 1977. Hughes Aircraft Co., R & D Productivity-Study Report, Hughes Aircraft Co., Culver City , California, 1974

  1. Conditions for industrial production

    DEFF Research Database (Denmark)

    Jensen, Karsten Ingerslev; Schultz, Jørgen Munthe; Brauer, H.

    1996-01-01

    The possibility of an industrial aerogel glazing production is discussed with respect to sample size, sales volume and prices. Different ways of an industrial assembling line is outlined and the total costs of a 1 square meter aerogel glazing is calculated.......The possibility of an industrial aerogel glazing production is discussed with respect to sample size, sales volume and prices. Different ways of an industrial assembling line is outlined and the total costs of a 1 square meter aerogel glazing is calculated....

  2. Mycotoxins in poultry production

    OpenAIRE

    Resanović Radmila M.; Nešić Ksenija D.; Nesić Vladimir D.; Palić Todor D.; Jaćević Vesna M.

    2009-01-01

    All poultry is sensitive to mycotoxins. This partly depends on the type, age and production categories of poultry, their living conditions and nutritive status and partly on the type, quantity and duration of mycotoxin ingestion. The presence of mycotoxins results in significant health disorders and a decrease in production performances. This leads to considerable economic loss for the poultry industry - either direct losses, i.e. death of the poultry or the indirect ones, i.e. the decrease i...

  3. Goat production check list

    DEFF Research Database (Denmark)

    Henriksen, Jørgen; Nielsen, Mette Benedicte Olaf; Madsen, Jørgen

    2009-01-01

    This check list, financed by DanChurchAid, highlights all issues should be carefully investigated before investing in distribution of goats and in interventions to assist poor rural communities to improve their livelihood through goat production.......This check list, financed by DanChurchAid, highlights all issues should be carefully investigated before investing in distribution of goats and in interventions to assist poor rural communities to improve their livelihood through goat production....

  4. New product pricing

    International Nuclear Information System (INIS)

    Wilkinson, V.K.

    1981-01-01

    One of the most uncertain elements in budget planning is estimating production costs of items that have heretofore only been produced in prototype configurations and quantities. This paper examines the design and development of a mathematical model which computes appropriate prices for new and unique products. The resulting model offers a producer a fair return on his investment and the consumer a fair purchase price

  5. Selling new products

    OpenAIRE

    Borgh, van der, W.

    2012-01-01

    As we proceed into the 21st century, companies are facing increasingly complex and dynamic business environments. Many organizations have to deal with intense competition as more products are introduced faster, with shorter life cycles, and less competitive differentiation. Consequently, companies are pushed to not only be more adept in product development but also in capitalizing on these innovative activities. However, while companies have become more successful in inventing and developing ...

  6. Managing Joint Production Motivation

    DEFF Research Database (Denmark)

    Lindenberg, Siegwart; Foss, Nicolai Juul

    2011-01-01

    We contribute to the microfoundations of organizational performance by proffering the construct of joint production motivation. Under such motivational conditions individuals see themselves as part of a joint endeavor, each with his or her own roles and responsibilities; generate shared...... representations of actions and tasks; cognitively coordinate cooperation; and choose their own behaviors in terms of joint goals. Using goal-framing theory, we explain how motivation for joint production can be managed by cognitive/symbolic management and organizational design....

  7. Radioactive consumer products

    International Nuclear Information System (INIS)

    Sato, Otomaru

    1981-01-01

    Present situation of utilizing the radioactive consumer products and exposure dose were reviewed with published data. Practically, consumer products are divided into three categories, (1) radioactive nuclides intentionally incorporated into radioluminous dye, ionization chambers for smoke detector, eliminator of static electricity, and glow lamp (2) natural radioactive nuclides contained in false teeth, porcelain, glass, and gas mantle (3) natural radioactive nuclides accumulated as industrial waste at the consumption of coal, petroleum, and natural gas or in fertilizer and materials for construction. (Nakanishi, T.)

  8. PRODUCTION OF TRITIUM

    Science.gov (United States)

    Jenks, G.H.; Shapiro, E.M.; Elliott, N.; Cannon, C.V.

    1963-02-26

    This invention relates to a process for the production of tritium by subjecting comminuted solid lithium fluoride containing the lithium isotope of atomic mass number 6 to neutron radiation in a self-sustaining neutronic reactor. The lithium fiuoride is heated to above 450 deg C. in an evacuated vacuum-tight container during radiation. Gaseous radiation products are withdrawn and passed through a palladium barrier to recover tritium. (AEC)

  9. Heavy quark production

    International Nuclear Information System (INIS)

    Rossi, L.; Genoa Univ.

    1992-01-01

    The hadro- and photo-production of charm and beauty particles are reviewed. The most recent experimental results on charm are compared with the next-to-leading order perturbative QCD calculations as a check of the theory. Results on beauty production at hadronic colliders are presented and indicate that these machines may also be regarded as beauty factories. (author) 21 refs.; 18 figs.; 2 tabs

  10. MICROORGANISMS IN CONFECTIONERY PRODUCTS

    Directory of Open Access Journals (Sweden)

    Ľubomíra Juhaniaková

    2011-08-01

    Full Text Available The aim of this work was to determine microbiological quality of confectionery products. In confectionery products microbiological parameters: coliforms bacteria, microscopic filamentous fungi and yeasts, Salmonella sp. and staphylococci were observed. The confectionery products were evaluated: Kremes - honey cube, roll Arabica, roll Rona, roll stuffed with apricot cream, honey cube, pinwheel caramel, Sachovnica cut, Zora cut and curd cake. For microbiological tests 18 samples of confectionery products were used. Numbers of coliforms bacteria in confectionery products ranged from <1x101 to 4x102 cfu.g-1, the number of microscopic fungi ranged from 0 to <1x101 cfu.g-1, the number of yeasts from <1x101 to 5.5x102 cfu.g-1, cells of Salmonella sp. were not detected and the number of staphylococci was from 0 to <1x101 cfu.g-1. All investigated samples of confectionary products were in accordance with the Codex Alimentarius of the Slovak Republic.

  11. Material and energy productivity.

    Science.gov (United States)

    Steinberger, Julia K; Krausmann, Fridolin

    2011-02-15

    Resource productivity, measured as GDP output per resource input, is a widespread sustainability indicator combining economic and environmental information. Resource productivity is ubiquitous, from the IPAT identity to the analysis of dematerialization trends and policy goals. High resource productivity is interpreted as the sign of a resource-efficient, and hence more sustainable, economy. Its inverse, resource intensity (resource per GDP) has the reverse behavior, with higher values indicating environmentally inefficient economies. In this study, we investigate the global systematic relationship between material, energy and carbon productivities, and economic activity. We demonstrate that different types of materials and energy exhibit fundamentally different behaviors, depending on their international income elasticities of consumption. Biomass is completely inelastic, whereas fossil fuels tend to scale proportionally with income. Total materials or energy, as aggregates, have intermediate behavior, depending on the share of fossil fuels and other elastic resources. We show that a small inelastic share is sufficient for the total resource productivity to be significantly correlated with income. Our analysis calls into question the interpretation of resource productivity as a sustainability indicator. We conclude with suggestions for potential alternatives.

  12. Particle production by neutrinos

    International Nuclear Information System (INIS)

    Schreiner, P.

    1979-01-01

    A review is given of particle production by neutrinos in charged-current inclusive and exclusive channels. The production rates for various particles in neutrino-nucleon interactions at a beam energy of 25 GeV are compared. The mesons are, of course, dominated by pion production. The p 0 (760) rate is an order of magnitude smaller. Strange and charm pseudoscalar mesons are a further factor of two down in rate. The strange vector mesons are suppressed by more than an order of magnitude relative to K 0 production; however, the charmed D* + (2010) is only a factor of two smaller in rate than the D 0 (1860). With regards to the baryons, most of them are, of course, nucleons. The Λ 0 and Y*(1385) rates are down by one and two orders of magnitudes, respectively. The lower limit on the charmed Σ/sub c/ ++ baryon rate is similar to the Y*(1385) rate. Finally, the quasielastic and one-pion production exclusive channels have about the same cross section as that of the D* + ; associated production of strange particles in the νn → μ - K + Λ channel and the ΔS = +ΔΩ process νp → μ - pK + are down by factors of five and twenty, respectively, compared to the quasielastic cross section

  13. Whither tobacco product regulation?

    Science.gov (United States)

    McNeill, Ann; Hammond, David; Gartner, Coral

    2012-03-01

    Despite decades of industry innovation and regulatory efforts, the harmfulness of conventional cigarettes has not changed. There are several pitfalls in this area, including the long time lag before health impacts of product regulatory changes become apparent, the danger of consumers deriving false reassurance of lesser harm in the interim period, the lack of relevant expertise and the lack of an internationally agreed and evidence-based strategic approach. Articles 9 and 10 of the Framework Convention on Tobacco Control provide the potential for such a global strategy, and knowledge and research has increased significantly over recent years. However, there are huge opportunity costs in implementing product disclosure and regulatory strategies: most national regulators have very limited human and financial resources, which should be focused on other evidence-based tobacco control interventions. We believe therefore that it is now time to abandon the notion of safe or safer cigarettes while moving consumers towards cleaner nicotine products as soon as possible. In parallel to this, we recommend a number of other strategies be implemented including: reducing the appeal of all tobacco products, forbidding new tobacco products or brand variants being marketed without evidence of reduced harm, appeal or addictiveness, and developing a tobacco industry resourced, but industry independent, Framework Convention on Tobacco Control global repository to assist national regulators in understanding and regulating the products on their markets.

  14. Production of uranium dioxide

    International Nuclear Information System (INIS)

    Hart, J.E.; Shuck, D.L.; Lyon, W.L.

    1977-01-01

    A continuous, four stage fluidized bed process for converting uranium hexafluoride (UF 6 ) to ceramic-grade uranium dioxide (UO 2 ) powder suitable for use in the manufacture of fuel pellets for nuclear reactors is disclosed. The process comprises the steps of first reacting UF 6 with steam in a first fluidized bed, preferably at about 550 0 C, to form solid intermediate reaction products UO 2 F 2 , U 3 O 8 and an off-gas including hydrogen fluoride (HF). The solid intermediate reaction products are conveyed to a second fluidized bed reactor at which the mol fraction of HF is controlled at low levels in order to prevent the formation of uranium tetrafluoride (UF 4 ). The first intermediate reaction products are reacted in the second fluidized bed with steam and hydrogen at a temperature of about 630 0 C. The second intermediate reaction product including uranium dioxide (UO 2 ) is conveyed to a third fluidized bed reactor and reacted with additional steam and hydrogen at a temperature of about 650 0 C producing a reaction product consisting essentially of uranium dioxide having an oxygen-uranium ratio of about 2 and a low residual fluoride content. This product is then conveyed to a fourth fluidized bed wherein a mixture of air and preheated nitrogen is introduced in order to further reduce the fluoride content of the UO 2 and increase the oxygen-uranium ratio to about 2.25

  15. Product Quality and Worker Quality

    OpenAIRE

    Abowd, John M; Kramarz, Francis

    1995-01-01

    We study the relation between product quality and worker quality using an economic model that, under certain conditions, provides a direct link between product price, product quality and work-force quality. Our measures of product quality are the evolution in the detailed product price relative to its product group, and the level of the product price relative to this group. Our worker quality measures are the firm's average person effect and personal characteristics effect from individual wag...

  16. Product Quality and Worker Quality

    OpenAIRE

    John M. ABOWD; Françis KRAMARZ; Antoine MOREAU

    1996-01-01

    We study the relation between product quality and worker quality using an economic model that, under certain conditions, provides a direct link between product price, product quality and work force quality. Our measures of product quality are the evolution in the detailed product price relative to its product group and the level of the product price relative to this group. Our worker quality measures are the firm's average person effect and personal characteristics effect from individual wage...

  17. Perspectives in production of functional meat products

    Science.gov (United States)

    Vasilev, D.; Glišić, M.; Janković, V.; Dimitrijević, M.; Karabasil, N.; Suvajdžić, B.; Teodorović, V.

    2017-09-01

    The meat industry has met new challenges since the World Health Organization classified processed meat in carcinogenic Group 1. In relation to this, the functional food concept in meat processing has gained importance, especially in reducing carcinogenic N-nitroso compounds and polycyclic aromatic hydrocarbons (PAHs) as an additional imperative, apart from the usual fat and salt reduction and product enrichment with functional ingredients. PAH reduction relies on control of the smoking process, but there is also a possibility they could be degraded by means of probiotic microorganisms or spices. The reduction of N-nitroso compounds could be provided by lowering the amount of added nitrite/nitrate, using substitutes for these chemicals, and/or by preventing conditions for the creation of N-nitroso compounds. Nevertheless, fat and salt reductions still remain topical, and rely mostly on the use of functional ingredients as their substitutes.

  18. Biodiesel production technologies: review

    Directory of Open Access Journals (Sweden)

    Shemelis Nigatu Gebremariam

    2017-05-01

    Full Text Available Biodiesel is a fuel with various benefits over the conventional diesel fuel. It is derived from renewable resources, it has less emission to environment, it is biodegradable so has very limited toxicity and above all its production can be decentralized so that it could have a potential in helping rural economies. However, there are also some worth mentioning challenges associated with production of biodiesel. Among them repeatedly mentioned are the cost of feedstock and the choice of convenient technology for efficient production of the fuel from diverse feedstock types. There are four main routes by which raw vegetable oil and/or animal fat can be made suitable for use as substituent fuel in diesel engines without modification. These are direct use or blending of oils, micro-emulsion, thermal cracking or pyrolysis and transesterification reaction. Due to the quality of the fuel produced, the transesterification method is the most preferred way to produce biodiesel from diverse feedstock types. Through this method, oils and fats (triglycerides are converted to their alkyl esters with reduced viscosity to near diesel fuel levels. There are different techniques to carry out transesterification reaction for biodiesel production. Each technique has its own advantages and disadvantages as well as its own specifically convenient feedstock character. There are also some very important reaction conditions to be given due attention in each of this techniques for efficient production of biodiesel, such as molar ratio of alcohol to oil, type and amount of catalyst, reaction temperature, reaction time, reaction medium, type and relative amount of solvents, among others. This review is meant to investigate the main transesterification techniques for biodiesel production in terms of their choice of feedstock character as well as their determinately required reaction conditions for efficient biodiesel production, so that to give an overview on their advantages

  19. Product Knowledge Modelling and Management

    DEFF Research Database (Denmark)

    Zhang, Y.; MacCallum, K. J.; Duffy, Alex

    1996-01-01

    function-oriented design. Both Specific Product Knowledge and Product Domain Knowledge are modelled at two levels, a meta-model and an information-level.Following that, a computer-based scheme to manage the proposed product lknowledge models within a dynamically changing environment is presented.......The term, Product Knowledge is used to refer to two related but distinct concepts; the knowledge of a specific product (Specific Product Knowledge) and the knowledge of a product domain (Product Domain Knowledge). Modelling and managing Product Knowlege is an essential part of carrying out design.......A scheme is presented in this paper to model, i.e. classify, structure and formalise the product knowledge for the purpose of supporting function-oriented design. The product design specification and four types of required attributes of a specific product have been identified to form the Specific Product...

  20. Smoke production in fires

    Energy Technology Data Exchange (ETDEWEB)

    Sarvaranta, L.; Kokkala, M. [VTT Building Technology, Espoo (Finland). Building Physics, Building Services and Fire Technology

    1995-12-31

    Characterization of smoke, factors influencing smoke production and experimental methods for measuring smoke production are discussed in this literature review. Recent test-based correlation models are also discussed. Despite the large number of laboratories using different fire testing methods, published smoke data have been scarce. Most technical literature on smoke production from building materials is about experimental results in small scale tests. Compilations from cone calorimeter tests have been published for a few materials, e.g. upholstered furniture materials and some building products. Mass optical density data and compilations of gravimetric soot data are available for various materials as well as a number of smoke obscuration values. For a given material often a wide range of values of smoke output can be found in the literature and care should be exercised in applying the appropriate value in each case. In laboratory experiments, the production of smoke and its optical properties are often measured simultaneously with other fire properties as heat release and flame spread. The measurements are usually dynamic in full scale, i.e. they are performed in a flow-through system. In small scale they may be either dynamic, as in the cone calorimeter, or static, i.e. the smoke is accumulated in a closed box. Small-scale tests are necessary as practical tools. Full-scale tests are generally considered to be more reliable and are needed to validitate the small-scale tests

  1. New Product Launching Ideas

    Science.gov (United States)

    Kiruthika, E.

    2012-09-01

    Launching a new product can be a tense time for a small or large business. There are those moments when you wonder if all of the work done to develop the product will pay off in revenue, but there are many things are can do to help increase the likelihood of a successful product launch. An open-minded consumer-oriented approach is imperative in todayís diverse global marketplace so a firm can identify and serve its target market, minimize dissatisfaction, and stay ahead of competitors. Final consumers purchase for personal, family, or household use. Finally, the kind of information that the marketing team needs to provide customers in different buying situations. In high-involvement decisions, the marketer needs to provide a good deal of information about the positive consequences of buying. The sales force may need to stress the important attributes of the product, the advantages compared with the competition; and maybe even encourage ìtrialî or ìsamplingî of the product in the hope of securing the sale. The final stage is the post-purchase evaluation of the decision. It is common for customers to experience concerns after making a purchase decision. This arises from a concept that is known as ìcognitive dissonance

  2. Hydrogen production by radiation

    International Nuclear Information System (INIS)

    Jung, Jin Ho; Lee, M. J.; Jin, J. H.; Park, K. B.; Cho, Y. H.; Jeong, H. S.; Chung, H. H.; Jeong, Y. S.; Ahn, S. S.

    2001-04-01

    In this work, various kinds of catalysts including a nanosize TiO2 (nTiO 2 ) were examined in respect to the efficiency of H2 production by gamma rays.The different activity of catalysts was characterized by X-ray powder diffraction (XRD) and electron paramagnetic resonance (EPR). A combination of EPR and spin-trapping method was also used to detect unstable radicals such as hydroxyl radicals and hydrogen atoms to investigate the effect of catalysts and additives on the efficiency of H2 production. A nanosize TiO 2 (nTiO 2 ) catalyst that showed an excellent activity in the production of H2 from water by gamma rays were examined in respect to the efficiency of H2 production with concomitant treatment of metal-EDTA complexes that are main wastes of chemical cleaning wastewater. As a result, among the catalysts examined in this work, a nanosize TiO2 (nTiO 2 ) showed the most efficient H2 production and the efficiency increased upon reapplication. This catalyst was also successfully used to produce H2 with concomitant treatment of metal-EDTA complexes

  3. Uranium production in Sweden

    International Nuclear Information System (INIS)

    Bergh, S.

    1994-01-01

    The history of uranium production in Sweden is reviewed in the article. The World War II led to an exploitation of the Swedish alum shale on a large scale. In the last phase of the war it also became obvious that the shale might be used for energy production of quite another kind than oil. In 1947 AB Atom energy was founded, an enterprise with one of its purposes to extract uranium for peaceful use. A plant with a yearly capacity of 120 tons of uranium was erected at Ranstad and ready for production by 1965. From the start in Ranstad and for many years to come there was hardly any interest in an immediate large uranium production. It was decided to use the plant for studies on its more effective exploitation in case of an expansion in the future, bearing in mind the reactor programme. In the course of time economical reasons began to speak against the project. The shale seemed to have a future neither as oil nor as uranium resource. The complete termination of the work on uranium production from shale occurred in 1989

  4. Gestion de production

    CERN Document Server

    Courtois, Alain; Pillet, Maurice

    1995-01-01

    n ouvrage de référence pour tous les gestionnaires de production industrielle. Un cas concret d'entreprise fictive, fil rouge de l'ouvrage, pour expliquer et illustrer les différents outils et méthodes utilisés. Toutes les méthodes et tous les outils de gestion de production, des plus traditionnels aux novateurs, explicités, comparés et illustrés. L'ouvrage, entièrement mis à jour, reflète toutes les évolutions liées à la gestion de production. II se divise désormais en deux grandes partes ; la première regroupe les méthodes de base de la gestion de la production ainsi que l'informatisation de celles-ci (chapitres 2 à 10) ; la seconde concerne les méthodes d'amélioration de la production (chapitres 11 à 15), en mettant un accent fort sur la philosophie du Lean Manufacturing : L'entreprise en mouvement avec le Lean ; Les principaux outils du Lean ; Le pilotage d'atelier en flux tirés par la méthode Kanban ; L'implantation d'ateliers ; Les indicateurs de performance. Pour faciliter la le...

  5. Optimizing kaon production

    International Nuclear Information System (INIS)

    Berley, D.

    1976-01-01

    Kaon production data is examined with the view toward producing high quality beams in the future. Emphasis is placed upon the low momentum region, below 1 GeV/c, where the behavior of the kaon momentum spectrum is shown to be dominated by strongly momentum dependent kinematic factors. No complete experimental survey of production cross sections at different incident proton energies exists from a single apparatus. Information on relative production yields for different proton energies is important in the choice of parameters for an accelerator constructed primarily as a source of kaons. Data from different accelerators do exist and have been compiled. The key element in understanding how to present the data from different laboratories in a consistent way is an analysis of the effects of target material, target size, and production angle. This analysis not only enables a unification of the data but also indicates simple, useful and powerful principles about optimizing target efficiency. A summary is presented of existing kaon production facilities in the United States. These are all at proton accelerators. The possibility of using electron accelerators as kaon sources is examined. It is found that secondary beam fluxes can be obtained at electron linacs which are comparable to those obtained at proton synchrotrons

  6. Smoke production in fires

    Energy Technology Data Exchange (ETDEWEB)

    Sarvaranta, L; Kokkala, M [VTT Building Technology, Espoo (Finland). Building Physics, Building Services and Fire Technology

    1996-12-31

    Characterization of smoke, factors influencing smoke production and experimental methods for measuring smoke production are discussed in this literature review. Recent test-based correlation models are also discussed. Despite the large number of laboratories using different fire testing methods, published smoke data have been scarce. Most technical literature on smoke production from building materials is about experimental results in small scale tests. Compilations from cone calorimeter tests have been published for a few materials, e.g. upholstered furniture materials and some building products. Mass optical density data and compilations of gravimetric soot data are available for various materials as well as a number of smoke obscuration values. For a given material often a wide range of values of smoke output can be found in the literature and care should be exercised in applying the appropriate value in each case. In laboratory experiments, the production of smoke and its optical properties are often measured simultaneously with other fire properties as heat release and flame spread. The measurements are usually dynamic in full scale, i.e. they are performed in a flow-through system. In small scale they may be either dynamic, as in the cone calorimeter, or static, i.e. the smoke is accumulated in a closed box. Small-scale tests are necessary as practical tools. Full-scale tests are generally considered to be more reliable and are needed to validitate the small-scale tests

  7. Product mix retail strategies

    Directory of Open Access Journals (Sweden)

    Ristić Miloš

    2005-01-01

    Full Text Available The sales of appropriate merchandise is essential for performance of every retail enterprise. The way that products are displayed within retail sales object will be in so much important as the merchandise is considered a pad of the perceived image of that outlet. Thus, assorted products speak to their consumers as far as to what they [the consumers] can expect, and they signal off a number of marketing messages as well. Merchandising is the key element in attracting the consumers and in encouraging of repeated purchases. The question then could be: products or services?, yet the retailer's future will depend on his ability to develop the best sale offers. The selection of appropriate merchandise, and that would be the one [merchandise] that is in accordance with outlet's image, requires careful planning which, again, needs to be related with the direction the seller is following. Managing of the product assortments' dimensions emerges from the retailer's strategic planning, therefore, the decisions made on the inclusion of novel products as well as about deleting of the old stock are deemed (to be strategic.

  8. Oil production system

    Energy Technology Data Exchange (ETDEWEB)

    Ballantyne, J F

    1983-12-21

    A new oil producing system is proposed which consists of a group of underwater wells, an underwater riser and a floating storage facility for the production of the wells. The group of wells and the riser are interconnected through a manifold system in such a way that the production from any well or from the entire group of wells go to the base (foundation) of the riser. From above the riser is connected with the floating storage facility which is equipped, besides tanks for storing the well products, with a separation device for separating the oil and the accompanying gas. The gas is used as a fuel for producing electric power required by the dynamic positioning systems. The products from each well are tested by means of a regulable coupling controlled by means of a cable, which is passed from the surface through the riser. The wellhead equipment for the unslanted wells is mounted on a template previously installed on the sea floor. From the template the well products enter the riser through the manifold unit system.

  9. Beauty production at CDF

    International Nuclear Information System (INIS)

    Shears, Tara

    2008-01-01

    A review of recent measurements of beauty production, based on proton antiproton collision data at √s = 1.96 TeV and using the CDF detector, is given. Previous measurements of beauty (b) quark production at the Tevatron, carried out at centre-of-mass energies √s = 1.8 TeV, have shown discrepancies when compared to Next to Leading Order (NLO) predictions [1]. Improved predictions and experimental procedures have reduced this discrepancy [2]. Improved parton density functions, better fragmentation functions and more complete theoretical calculations have improved theoretical accuracy. Experimentally, measurements of beauty production at √s = 1.96 TeV are now presented in terms of b hadrons or B mesons, to avoid problems unfolding back to the quark level. In this review [3] measurements of inclusive beauty (where one beauty jet or hadron is reconstructed in the event), and beauty + X (where X can be a boson or another beauty jet or hadron), production will be presented: inclusive beauty jet cross-section; semi and fully reconstructed B meson cross-section; beauty dijet cross-section; semi-reconstructed B B meson cross-section; Z boson + beauty jet cross-section. More information concerning other measurements of heavy quark production can be found elsewhere [4

  10. Application of manufactured products

    Science.gov (United States)

    Sastri, Sankar; Duke, Michael B.

    1992-01-01

    A wide range of products can be manufactured from the following materials: (1) lunar regolith or basalt; (2) regolith or rock beneficiated to concentrate plagioclase or other minerals; (3) iron, extracted from lunar soil or rocks by various means; (4) naturally occurring or easily obtained materials that have cementitious properties; and (5) byproducts of the above materials. Among the products that can be produced from these materials are the following: beams; plates and sheets; transparent plates (windows); bricks and blocks; pipes and tubes; low-density materials (foams); fiber, wire, and cables; foils and reflective coatings; hermetic seals (coatings); and formed objects. In addition to oxygen, which can be obtained by several processes, either from unbeneficiated regolith or by reduction of concentrated ilmenite, these materials make the simplest requirements of the lunar resource extraction system. A thorough analysis of the impact of these simplest products on the economics of space operations is not possible at this point. Research is necessary both to define optimum techniques and adapt them to space and to determine the probable market for the products so that the priority of various processes can be assessed. Discussions of the following products are presented: aerobraking heat shields; pressurized habitats; lunar photovoltaic farms; and agricultural systems.

  11. ATLAS production system

    CERN Document Server

    Borodin, Mikhail; The ATLAS collaboration; De, Kaushik; Klimentov, Alexei; Golubkov, Dmitry; Maeno, Tadashi; Mashinistov, Ruslan; Wenaus, Torre; Padolski, Siarhei

    2016-01-01

    The second generation of the ATLAS production system called ProdSys2 is a distributed workload manager which used by thousands of physicists to analyze the data remotely, with the volume of processed data is beyond the exabyte scale, across a more than hundred heterogeneous sites. It achieves high utilization by combining dynamic job definition based on many criterias, such as input and output size, memory requirements and CPU consumption with manageable scheduling policies and by supporting different kind of computational resources, such as GRID, clouds, supercomputers and volunteering computers. Besides jobs definition Production System also includes flexible web user interface, which implements user-friendly environment for main ATLAS workflows, e.g. simple way of combining different data flows, and real-time monitoring, optimised for using with huge amount of information to present. We present an overview of the ATLAS Production System major components: job and task definition, workflow manager web user i...

  12. Renewable Acrylonitrile Production

    Energy Technology Data Exchange (ETDEWEB)

    Beckham, Gregg T [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Karp, Eric M [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Eaton, Todd R [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Sanchez i Nogue, Violeta [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Vorotnikov, Vassili [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Biddy, Mary J [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Tan, Eric C [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Brandner, David [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Manker, Lorenz [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Michener, William E [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Vardon, Derek R [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Bratis, Adam D [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Liu, Rongming [University of Colorado; Gill, Ryan T. [University of Colorado; Gilhespy, Michelle [Johnson Matthey Technology Centre; Skoufa, Zinovia [Johnson Matthey Technology Centre; Watson, Michael J. [Johnson Matthey Technology Centre; Fruchey, O. Stanley [MATRIC; Cywar, Robin M. [Formerly NREL

    2017-12-08

    Acrylonitrile (ACN) is a petroleum-derived compound used in resins, polymers, acrylics, and carbon fiber. We present a process for renewable ACN production using 3-hydroxypropionic acid (3-HP), which can be produced microbially from sugars. The process achieves ACN molar yields exceeding 90% from ethyl 3-hydroxypropanoate (ethyl 3-HP) via dehydration and nitrilation with ammonia over an inexpensive titanium dioxide solid acid catalyst. We further describe an integrated process modeled at scale that is based on this chemistry and achieves near-quantitative ACN yields (98 +/- 2%) from ethyl acrylate. This endothermic approach eliminates runaway reaction hazards and achieves higher yields than the standard propylene ammoxidation process. Avoidance of hydrogen cyanide as a by-product also improves process safety and mitigates product handling requirements.

  13. STALING OF BAKERY PRODUCTS

    Directory of Open Access Journals (Sweden)

    Jolana Karovičová

    2011-04-01

    Full Text Available The aim of this work was to write down a review article about various aspects connected with staling of bakery products. Shelf life is directly associated with the staling process, which depends on the composition of bakery products and important are storage conditions as well. In the article are described particular components (starch, nonstarch polysacharides, water and how they affect the staling process. Generally during staling of bakery products occur  processes related with starch retrogradation, moisture redistribution from the crumb to the crust and other interactions between components. Staling process could be delayed by using various bakery improvers like enzymes, hydrocolloids, emulgators and other compounds. Also useful is the application of suitable packaging techniques.doi:10.5219/124

  14. Product and Process Modelling

    DEFF Research Database (Denmark)

    Cameron, Ian T.; Gani, Rafiqul

    . These approaches are put into the context of life cycle modelling, where multiscale and multiform modelling is increasingly prevalent in the 21st century. The book commences with a discussion of modern product and process modelling theory and practice followed by a series of case studies drawn from a variety......This book covers the area of product and process modelling via a case study approach. It addresses a wide range of modelling applications with emphasis on modelling methodology and the subsequent in-depth analysis of mathematical models to gain insight via structural aspects of the models...... to biotechnology applications, food, polymer and human health application areas. The book highlights to important nature of modern product and process modelling in the decision making processes across the life cycle. As such it provides an important resource for students, researchers and industrial practitioners....

  15. Connecting the Production Multiple

    DEFF Research Database (Denmark)

    Lichen, Alex Yu; Mouritsen, Jan

    &OP process itself is a fluid object, but there is still possibility to organise the messy Production. There are connections between the Production multiple and the managerial technology fluid. The fluid enacted the multiplicity of Production thus making it more difficult to be organised because there were...... in opposite directions. They are all part of the fluid object. There is no single chain of circulating references that makes the object a matter of fact. Accounting fluidity means that references drift back and forth and enact new realities also connected to the chain. In this setting future research may......This paper is about objects. It follows post ANT trajectories and finds that objects are multiple and fluid. Extant classic ANT inspired accounting research largely sees accounting inscriptions as immutable mobiles. Although multiplicity of objects upon which accounting acts has been explored...

  16. Cyanobacterial chemical production.

    Science.gov (United States)

    Case, Anna E; Atsumi, Shota

    2016-08-10

    The increase in global temperatures caused by rising CO2 levels necessitates the development of alternative sources of fuel and chemicals. One appealing alternative that has been receiving increased attention in recent years is the photosynthetic conversion of atmospheric CO2 to biofuels and chemical products using genetically engineered cyanobacteria. This can help to not only provide an alternate "greener" source for some of the most popular petroleum based products but it can also help to reduce atmospheric CO2. Utilizing cyanobacteria rather than plants allows for reduced land requirements and reduces competition with food crops. This review discusses advancements in the field since 2012 with a particular emphasis on production of hydrocarbons. Copyright © 2016 Elsevier B.V. All rights reserved.

  17. Productivity and Institutions

    Directory of Open Access Journals (Sweden)

    Gylfi Zoega

    2015-12-01

    Full Text Available Differences in productivity account for differences in output per capita between countries as well as changes in output and the standard of living for each country over long periods of time. During the first industrial revolution, one could already see the emergence of two groups of countries: the high- and the low-GDP per capita countries. The list of countries belonging to the highproductivity group has not changed much over the past century. Differences in institutions separate the two clubs. The high-productivity group is, amongst many other differences, characterized by less corruption, a better legal system, superior enforcement of contracts, a lower cost of starting a business and lower tariffs. Historical output series for Britain going back to the mid-19th century show that productivity has increased greatly and improved the standard of living.

  18. Remelt Ingot Production Technology

    Science.gov (United States)

    Grandfield, J. F.

    The technology related to the production of remelt ingots (small ingots, sows and T-Bar) is reviewed. Open mold conveyors, sow casting, wheel and belt casting and VDC and HDC casting are described and compared. Process economics, capacity, product quality and process problems are listed. Trends in casting machine technology such as longer open mold conveyor lines are highlighted. Safety issues related to the operation of these processes are discussed. The advantages and disadvantages of the various machine configurations and options e.g. such as dry filling with the mold out of water and wet filling with the mold in water for open mould conveyors are discussed. The effect of mold design on machine productivity, mold cracking and mold life is also examined.

  19. Energy production systems engineering

    CERN Document Server

    Blair, Thomas Howard

    2017-01-01

    Energy Production Systems Engineering presents IEEE, Electrical Apparatus Service Association (EASA), and International Electrotechnical Commission (IEC) standards of engineering systems and equipment in utility electric generation stations. Electrical engineers that practice in the energy industry must understand the specific characteristics of electrical and mechanical equipment commonly applied to energy production and conversion processes, including the mechanical and chemical processes involved, in order to design, operate and maintain electrical systems that support and enable these processes. To aid this understanding, Energy Production Systems Engineeringdescribes the equipment and systems found in various types of utility electric generation stations. This information is accompanied by examples and practice problems. It also addresses common issues of electrical safety that arise in electric generation stations.

  20. Productivity Change and Externalities

    DEFF Research Database (Denmark)

    Kravtsova, Victoria

    2014-01-01

    This paper contributes to the analysis of the impact of externalities on the host country's total factor productivity by taking into account different dimensions of spillover effects. Namely, engagement in exporting and foreign ownership is generally perceived as being beneficial to individual...... firms and the economy as a whole. The approach used in the current research accounts for different internal as well as external factors that individual firms face and evaluates the effect on changes in productivity, technology as well as the efficiency of domestic firms. The empirical analysis focuses...... on Hungary. While the country leads the group of post-socialist countries in the amount of attracted foreign direct investments (FDI) the effect of this policy on the economy remains unclear. The research finds that different externalities play a different role in productivity, technological and efficiency...

  1. Antiplasmodial Natural Products

    Directory of Open Access Journals (Sweden)

    Cláudio R. Nogueira

    2011-03-01

    Full Text Available Malaria is a human infectious disease that is caused by four species of Plasmodium. It is responsible for more than 1 million deaths per year. Natural products contain a great variety of chemical structures and have been screened for antiplasmodial activity as potential sources of new antimalarial drugs. This review highlights studies on natural products with antimalarial and antiplasmodial activity reported in the literature from January 2009 to November 2010. A total of 360 antiplasmodial natural products comprised of terpenes, including iridoids, sesquiterpenes, diterpenes, terpenoid benzoquinones, steroids, quassinoids, limonoids, curcubitacins, and lanostanes; flavonoids; alkaloids; peptides; phenylalkanoids; xanthones; naphthopyrones; polyketides, including halenaquinones, peroxides, polyacetylenes, and resorcylic acids; depsidones; benzophenones; macrolides; and miscellaneous compounds, including halogenated compounds and chromenes are listed in this review.

  2. Additives in yoghurt production

    Directory of Open Access Journals (Sweden)

    Milna Tudor

    2008-02-01

    Full Text Available In yoghurt production, mainly because of sensory characteristics, different types of additives are used. Each group, and also each substance from the same group has different characteristics and properties. For that reason, for improvement of yoghurt sensory characteristics apart from addition selection, the quantity of the additive is very important. The same substance added in optimal amount improves yoghurt sensory attributes, but too small or too big addition can reduce yoghurt sensory attributes. In this paper, characteristics and properties of mostly used additives in yoghurt production are described; skimmed milk powder, whey powder, concentrated whey powder, sugars and artificial sweeteners, fruits, stabilizers, casein powder, inulin and vitamins. Also the impact of each additive on sensory and physical properties of yoghurt, syneresis and viscosity, are described, depending on used amount added in yoghurt production.

  3. Sustainable Biocatalytic Biodiesel Production

    DEFF Research Database (Denmark)

    Güzel, Günduz

    As part of his PhD studies, Gündüz Güzel examined the thermodynamics of reactions involved in biocatalytic biodiesel production processes, with a specific focus on phase equilibria of reactive systems. He carried out the thermodynamic analyses of biocatalytic processes in terms of phase and chemi......As part of his PhD studies, Gündüz Güzel examined the thermodynamics of reactions involved in biocatalytic biodiesel production processes, with a specific focus on phase equilibria of reactive systems. He carried out the thermodynamic analyses of biocatalytic processes in terms of phase...... and chemical equilibria as part of his main sustainable biodiesel project. The transesterification reaction of vegetable oils or fats with an aliphatic alcohol – in most cases methanol or ethanol – yields biodiesel (long-chain fatty acid alkyl esters – FAAE) as the main product in the presence of alkaline...

  4. Real time production optimization

    Energy Technology Data Exchange (ETDEWEB)

    Saputelli, Luigi; Otavio, Joao; Araujo, Turiassu; Escorcia, Alvaro [Halliburton, Houston, TX (United States). Landmark Division

    2004-07-01

    Production optimization encompasses various activities of measuring, analyzing, modeling, prioritizing and implementing actions to enhance productivity of a field. We present a state-of-the-art framework for optimizing production on a continuous basis as new sensor data is acquired in real time. Permanently acquired data is modeled and analyzed in order to create predictive models. A model based control strategy is used to regulate well and field instrumentation. The optimum field operating point, which changes with time, satisfies the maximum economic return. This work is a starting point for further development in automatic, intelligent reservoir technologies which get the most out of the abilities of permanent, instrumented wells and remotely activated downhole completions. The strategy, tested with history-matched data from a compartmentalised giant field, proved to reduce operating costs while increasing oil recovery by 27% in this field. (author)

  5. Radiopharmacy and radiopharmaceutical products

    International Nuclear Information System (INIS)

    Galy, Gerard; Fraysse, Marc; Hammadi, Akli; Tafani, Mathieu

    2012-01-01

    Written by two radio-pharmacist doctors, this book presents all the theoretical and practical knowledge necessary to radio-pharmacists in charge of the management, the preparation, the control and the delivery of radiopharmaceutical medicines. It presents the scientific, regulatory and technical foundations for the implementation and operation of radiopharmacy in hospitals, addressing themes such as the fundamentals and theories about nuclear physics and radioactivity (production of artificial radionuclides, detectors and measuring instruments, radio-chemistry), radio-biology and radiation protection (biological effects of ionizing radiations, radioprotection, regulations concerning the use of radiopharmaceutical products by medical personnel), the application domains of radiopharmaceutical medicines and products (diagnosis, therapy, biological assessment), and the management of radiopharmacy in a hospital (design, implementation, organizing, operation)

  6. Improving pension product design

    DEFF Research Database (Denmark)

    Konicz, Agnieszka Karolina; Mulvey, John M.

    2013-01-01

    The paper develops a pension product that can be oered in a dened contribution pension scheme as a deferred or immediate life annuity. The product is characterized by linking an individual's savings directly to market returns and differs from the products available in the market by being adjusted...... to individual needs. We argue that the asset allocation, the payout prole and the insured sum should not only depend on the plan member's age (or time left to retirement), nor only on her risk preferences, but should capture personal and economical characteristics. Among other factors, we include current wealth...... are optimal under the expected utility function of retirement benets given the individual's characteristics. The problem is solved via a model that combines two optimization approaches: stochastic optimal control and multistage stochastic programming. The rst method is common in nancial and actuarial...

  7. Intake to Production Ratio

    DEFF Research Database (Denmark)

    Nazaroff, William; Weschler, Charles J.; Little, John C.

    2012-01-01

    BACKGROUND: Limited data are available to assess human exposure to thousands of chemicals currently in commerce. Information that relates human intake of a chemical to its production and use can help inform understanding of mechanisms and pathways that control exposure and support efforts...... to protect public health.OBJECTIVES: We introduce the intake-to-production ratio (IPR) as an economy-wide quantitative indicator of the extent to which chemical production results in human exposure.METHODS: The IPR was evaluated as the ratio of two terms: aggregate rate of chemical uptake in a human......(n-butyl) phthalate, 1,040 ppm for para-dichlorobenzene, 6,800 ppm for di(isobutyl) phthalate, 7,700 ppm for diethyl phthalate, and 8,000-24,000 ppm (range) for triclosan.CONCLUSION: The IPR is well suited as an aggregate metric of exposure intensity for characterizing population-level exposure to synthesized...

  8. Production of endogenous pyrogen.

    Science.gov (United States)

    Dinarello, C A

    1979-01-01

    The production and release of endogenous pyrogen by the host is the first step in the pathogenesis of fever. Endogenous pyrogen is a low-molecular-weight protein released from phagocytic leukocytes in response to several substances of diverse nature. Some of these agents stimulate production of endogenous pyrogen because they are toxic; others act as antigens and interact with either antibody or sensitized lymphocytes in order to induce its production. Some tumors of macrophage origin produce the molecule spontaneously. Whatever the mechanism involved, endogenous pyrogen is synthesized following transcription of new DNA and translation of mRNA into new protein. Once synthesis is completed, the molecule is released without significant intracellular storage. Recent evidence suggests that following release, molecular aggregates form which are biologically active. In its monomer form, endogenous pyrogen is a potent fever-producing substance and mediates fever by its action on the thermoregulatory center.

  9. Product-Marketing Innovation, Skills, and Firm Productivity Growth

    DEFF Research Database (Denmark)

    Junge, Martin; Severgnini, Battista; Sørensen, Anders

    2016-01-01

    The role of product and marketing innovation for productivity growth is addressed using survey and register data for the Danish economy. It is hypothesized that product and marketing innovation are complementary inputs and that innovation activities are skill-intensive. It is established...... that product and marketing innovation in skill-intensive firms results in significantly faster productivity growth. Moreover, product and marketing innovation have independent roles in productivity growth, which cannot be attributed to organizational changes. Finally, we apply an instrument variable approach...... for firms, innovation choices to study endogeneity. The results strongly support the idea that product–marketing innovation leads to faster productivity growth in skill-intensive firms....

  10. Transdisciplinary product development

    Directory of Open Access Journals (Sweden)

    Tomaž Savšek

    2015-12-01

    Full Text Available Research Question (RQ: How can transdisciplinary approach increase the product development process in future industry? Purpose: The aim of the research is to develop a model of an effective product development in the automotive industry based on the transdisciplinary approach. Method: We used a qualitative research approach in order to develop a theoretical framework of transdisciplinarity. The framework comprises the concurrent engineering and experts from different disciplines. The framework was represented by a mathematical model which based on stochastic dynamic programming. Results: We developed a theoretical frameworkand a practical case of transdisciplinary product development in the automotive industry. We presented a mathematical model and information environment which supports such a model. Organization: The findings of the research will provide higher productivity, lower operating costs, change in personnel structure, higher added value, lower sales costs, lower administration costs, reduction in growth of expenses, and lower costs of work equipment. Society: The research impact on higher customer’s satisfaction, increased flexibility of operations, better quality of information, improved control of sources, less waste materials and less pollution, improved planning process, more favourable consideration of employees , improved portfolio management, and better corporate presentation of company. Originality: Transdisciplinary framework combines methods of concurrent engineering and interdisciplinary approach in a process of product development. The development of such a framework is a complete novelty and represents an original approach to product development, which will be particularly suitable for the smart factories of the future. Transdisciplinary framework was transformed in to a mathematical model based on stochastic dynamic programming. Model is supported by the existing information warehouse and represents a potential for

  11. Trade and Sectoral Productivity

    OpenAIRE

    Fadinger, Harald; Fleiss, Pablo

    2008-01-01

    Even though differences in sectoral total factor productivity are at the heart of Ricardian trade theory and many models of growth and development, very little is known about their size and their form. In this paper we try to fill this gap by using a Hybrid-Ricardo-Heckscher-Ohlin trade model and bilateral sectoral trade data to overcome the data problem that has limited previous studies, which have used input and output data to back out productivities, to a small number of OECD economies. We...

  12. Biotechnological production of vanillin.

    Science.gov (United States)

    Priefert, H; Rabenhorst, J; Steinbüchel, A

    2001-08-01

    Vanillin is one of the most important aromatic flavor compounds used in foods, beverages, perfumes, and pharmaceuticals and is produced on a scale of more than 10 thousand tons per year by the industry through chemical synthesis. Alternative biotechnology-based approaches for the production are based on bioconversion of lignin, phenolic stilbenes, isoeugenol, eugenol, ferulic acid, or aromatic amino acids, and on de novo biosynthesis, applying fungi, bacteria, plant cells, or genetically engineered microorganisms. Here, the different biosynthesis routes involved in biotechnological vanillin production are discussed.

  13. Innovativeness in production systems

    DEFF Research Database (Denmark)

    Blichfeldt, Henrik; Knudsen, Mette Præst

    Alignment of market demand and manufacturing capabilities are directly linked to the potential competitive advantage. Pressure for manufacturing companies to customize increase the need for productions systems to handle innovations, especially in SMEs. The paper claims that innovativeness has...... a positive influence of the ability of the manufacturing system to provide specific capabilities that enables the entire production system to positively influence the competitiveness. A comparative case study of three SMEs shows that competitive advantages are obtained through innovative technologies......, but revealed also automation potential in data and information management to be more responsive and cost-effective....

  14. Hadron coherent production

    International Nuclear Information System (INIS)

    Dremin, I.M.

    1981-01-01

    The process of the coherent production of hadrons analogous to Cherenkov radiation of photons is considered. Its appearence and qualitative treatment are possible now because it is known from experiment that the real part of the πp (and pp) forward elastic scattering amplitude is positive at high energies. The threshold behaviour of the process as well as very typical angular and psub(T)-distributions where psub(t)-transverse momentum corresponding to the ring structure of the target diagram at rather large angles and to high-psub(T) jet production are emphasized [ru

  15. Predicting safe sandwich production

    DEFF Research Database (Denmark)

    Birk, Tina; Duan, Zhi; Møller, Cleide Oliveira de Almeida

    2014-01-01

    Time and temperature control is crucial to avoid growth of pathogens during production and serving of cold ready-to-eat meals. The Danish guidelines state that chilled foods, such as sandwiches, should not be outside the cold chain for more than 3 hours including the time for preparation...... and serving. However, Danish sandwich producing companies find it challenging to comply with this and have expressed a need for more flexibility. The Danish guidelines do allow for a prolongation of the acceptable time outside the cold chain, if the safety of the specific production can be documented...

  16. Defect production in ceramics

    Energy Technology Data Exchange (ETDEWEB)

    Zinkle, S.J. [Oak Ridge National Lab., TN (United States); Kinoshita, C. [Kyushu Univ. (Japan)

    1997-08-01

    A review is given of several important defect production and accumulation parameters for irradiated ceramics. Materials covered in this review include alumina, magnesia, spinel silicon carbide, silicon nitride, aluminum nitride and diamond. Whereas threshold displacement energies for many ceramics are known within a reasonable level of uncertainty (with notable exceptions being AIN and Si{sub 3}N{sub 4}), relatively little information exists on the equally important parameters of surviving defect fraction (defect production efficiency) and point defect migration energies for most ceramics. Very little fundamental displacement damage information is available for nitride ceramics. The role of subthreshold irradiation on defect migration and microstructural evolution is also briefly discussed.

  17. Product Licenses Database Application

    CERN Document Server

    Tonkovikj, Petar

    2016-01-01

    The goal of this project is to organize and centralize the data about software tools available to CERN employees, as well as provide a system that would simplify the license management process by providing information about the available licenses and their expiry dates. The project development process is consisted of two steps: modeling the products (software tools), product licenses, legal agreements and other data related to these entities in a relational database and developing the front-end user interface so that the user can interact with the database. The result is an ASP.NET MVC web application with interactive views for displaying and managing the data in the underlying database.

  18. Fission product detection

    International Nuclear Information System (INIS)

    Liatard, E.; Akrouf, S.; Bruandet, J.F

    1987-01-01

    The response of photovoltaic cells to heavy ions and fission products have been tested on beam. Their main advantages are their extremely low price, their low sensitivity to energetic light ions with respect to fission products, and the possibility to cut and fit them together to any shape without dead zone. The time output signals of a charge sensitive preamplifier connected to these cells allows fast coincidences. A resolution of 12ns (F.W.H.M.) have been measured between two cells [fr

  19. Duration in Production Contracts

    OpenAIRE

    MacDonald, James M.; Korb, Penelope J.

    2006-01-01

    We use 2003 and 2004 ARMS data to analyze variations in contract duration among growers of broilers who hold production contracts. Most contracts cover just a single flock, but many extend for 1-2 years, and a significant minority of broiler contracts specify lengths of 5, 10, and even 15 years. We find that grower debt and production volume are inversely related to the choice of a short term (a year or less) contract, while lengthy prior experience with the contractor promotes short term con...

  20. Happiness and Productivity

    OpenAIRE

    Oswald, Andrew J.; Proto, Eugenio; Sgroi, Daniel

    2009-01-01

    Some firms say they care about the happiness and ‘well-being’ of their employees. But are such\\ud claims hype? Or might they be scientific good sense? This study provides evidence that happiness\\ud makes people more productive. First, we examine fundamental real-world shocks (bereavement and\\ud family illness) imposed by Nature. We show that lower happiness is associated with lower\\ud productivity. Second, within the laboratory, we design two randomized controlled trials. Some\\ud individuals ...

  1. Production Flexibility and Hedging

    Directory of Open Access Journals (Sweden)

    Georges Dionne

    2015-12-01

    Full Text Available We extend the analysis on hedging with price and output uncertainty by endogenizing the output decision. Specifically, we consider the joint determination of output and hedging in the case of flexibility in production. We show that the risk-averse firm always maintains a short position in the futures market when the futures price is actuarially fair. Moreover, in the context of an example, we show that the presence of production flexibility reduces the incentive to hedge for all risk averse agents.

  2. Software as quality product

    International Nuclear Information System (INIS)

    Enders, A.

    1975-01-01

    In many discussions on the reliability of computer systems, software is presented as the weak link in the chain. The contribution attempts to identify the reasons for this situation as seen from the software development. The concepts correctness and reliability of programmes are explained as they are understood in the specialist discussion of today. Measures and methods are discussed which are particularly relevant as far as the obtaining of fault-free and reliable programmes is concerned. Conclusions are drawn for the user of software so that he is in the position to judge himself what can be justly expected frm the product software compared to other products. (orig./LH) [de

  3. Charm production in SIBYLL

    CERN Document Server

    Riehn, Felix; Fedynitch, Anatoli; Gaisser, Thomas K.; Stanev, Todor

    2015-08-04

    SIBYLL 2.1 is an event generator for hadron interactions at the highest energies. It is commonly used to analyze and interpret extensive air shower measurements. In light of the first detection of PeV neutrinos by the IceCube collaboration the inclusive fluxes of muons and neutrinos in the atmosphere have become very important. Predicting these fluxes requires understanding of the hadronic production of charmed particles since these contribute significantly to the fluxes at high energy through their prompt decay. We will present an updated version of SIBYLL that has been tuned to describe LHC data and extended to include the production of charmed hadrons.

  4. FDG decomposition products

    International Nuclear Information System (INIS)

    Macasek, F.; Buriova, E.

    2004-01-01

    In this presentation authors present the results of analysis of decomposition products of [ 18 ]fluorodexyglucose. It is concluded that the coupling of liquid chromatography - mass spectrometry with electrospray ionisation is a suitable tool for quantitative analysis of FDG radiopharmaceutical, i.e. assay of basic components (FDG, glucose), impurities (Kryptofix) and decomposition products (gluconic and glucuronic acids etc.); 2-[ 18 F]fluoro-deoxyglucose (FDG) is sufficiently stable and resistant towards autoradiolysis; the content of radiochemical impurities (2-[ 18 F]fluoro-gluconic and 2-[ 18 F]fluoro-glucuronic acids in expired FDG did not exceed 1%

  5. Development of Production Systems

    DEFF Research Database (Denmark)

    Christiansen, Thomas Bøhm

    1997-01-01

    This paper presents the initial considerations related to a Ph.D. study initiated at IPV, DTU in February 1997, concerning the research subject "Development of Production Systems". The content and aim of this paper is to 1) to introduce the study by......This paper presents the initial considerations related to a Ph.D. study initiated at IPV, DTU in February 1997, concerning the research subject "Development of Production Systems". The content and aim of this paper is to 1) to introduce the study by...

  6. IPOs and Product Quality.

    OpenAIRE

    Stoughton, Neal M; Wong, Kit Pong; Zechner, Josef

    2001-01-01

    Given recent public attention paid to high-flying Internet IPOs such as Yahoo and Amazon.com, we explore a product market motive for going public. We develop a model where consumers discern product quality from the stock price. The model predicts that only better-quality firms will go public. Effects of IPO announcements on rival firms' stock prices are related to inferences about market size and market share. The model also predicts that the likelihood of "hot issue" markets depends on the d...

  7. Microbial products II

    Energy Technology Data Exchange (ETDEWEB)

    Pape, H; Rehm, H J [eds.

    1986-01-01

    The present volume deals mainly with compounds which have been detected as natural microbial products. Part 1 of this volume introduces the general aspects of the overproduction of metabolites and the concepts and genetics of secondary metabolism. Compounds such as nucleosides, nucleotides, coenzymes, vitamins and lipids are dealt with in part 2. Part 3 then is devoted to products and antibiotics with uses im medicine, veterinary medicine, plant protection and metabolites with antitumor activity. Several secondary metabolites have found uses in human and animal health care. With 244 figs., 109 tabs.

  8. Wavestar Energy Production Outlook

    DEFF Research Database (Denmark)

    Frigaard, Peter Bak; Andersen, Thomas Lykke; Kofoed, Jens Peter

    It is of paramount importance to decrease the Cost of Energy (CoE) from Wavestar wave energy con-verters (WECs) in order to make the WECs competitive to other sources of renewable energy. The CoE can be decreased by reducing the cost of the machines (CAPEX and OPEX) and by increasing the in......-come. The income can most obviously be enlarged by increasing the energy production. The focus of the present note is solely on expectations to the yearly energy production from future Wavestar WECs....

  9. Biological hydrogen production

    Energy Technology Data Exchange (ETDEWEB)

    Benemann, J.R. [Univ. of California, Berkeley, CA (United States)

    1995-11-01

    Biological hydrogen production can be accomplished by either thermochemical (gasification) conversion of woody biomass and agricultural residues or by microbiological processes that yield hydrogen gas from organic wastes or water. Biomass gasification is a well established technology; however, the synthesis gas produced, a mixture of CO and H{sub 2}, requires a shift reaction to convert the CO to H{sub 2}. Microbiological processes can carry out this reaction more efficiently than conventional catalysts, and may be more appropriate for the relatively small-scale of biomass gasification processes. Development of a microbial shift reaction may be a near-term practical application of microbial hydrogen production.

  10. Structure - materials - production

    DEFF Research Database (Denmark)

    Gammelgaard Nielsen, Anders; Gammel, Peder; Busch, Jens

    2002-01-01

    For the last six years th Aarhus School of Architecture has introduced the first year students (there are about 200 students admitted each year) to structure, materials, design and production through a five week course in collaboration with a group of local companies.......For the last six years th Aarhus School of Architecture has introduced the first year students (there are about 200 students admitted each year) to structure, materials, design and production through a five week course in collaboration with a group of local companies....

  11. Lean Production : Werkzeuge zur Realisierung

    OpenAIRE

    Binner, Hartmut F.

    2008-01-01

    INHALT: l. Einleitung und Standortbestimmung 2. Japanische Wertvorstellungen 3. Inhalte der Lean Production 4. Fertigungssegmentierung 5. Informationsmanagement mit CIM- und Logistik-Komponenten 6. Logistikgerechte Strukturen der Lean Production 7. Realisierung der Lean Production 8. Zusammenfassung

  12. Radiopharmaceutical production at Lucas Heights

    International Nuclear Information System (INIS)

    Druce, M.

    1987-01-01

    The difficult problems of operating and maintaining complex equipment, meeting despatch deadlines, ensuring product quality, production scheduling and controlling staff are discussed in relation to Australia's national radioisotope production plant

  13. Modelling of virtual production networks

    Directory of Open Access Journals (Sweden)

    2011-03-01

    Full Text Available Nowadays many companies, especially small and medium-sized enterprises (SMEs, specialize in a limited field of production. It requires forming virtual production networks of cooperating enterprises to manufacture better, faster and cheaper. Apart from that, some production orders cannot be realized, because there is not a company of sufficient production potential. In this case the virtual production networks of cooperating companies can realize these production orders. These networks have larger production capacity and many different resources. Therefore it can realize many more production orders together than each of them separately. Such organization allows for executing high quality product. The maintenance costs of production capacity and used resources are not so high. In this paper a methodology of rapid prototyping of virtual production networks is proposed. It allows to execute production orders on time considered existing logistic constraints.

  14. Heavy flavour production at LHCb

    CERN Document Server

    Barsuk, Sergey

    2016-01-01

    The present write-up reports recent LHCb results on production of quarkonium and open flavour states, as well as selected results on associated production, central exclusive production and pro- duction in heavy ion collisions.

  15. 78 FR 20176 - Credit for Renewable Electricity Production, Refined Coal Production, and Indian Coal Production...

    Science.gov (United States)

    2013-04-03

    ..., Refined Coal Production, and Indian Coal Production, and Publication of Inflation Adjustment Factors and... renewable electricity production, refined coal production, and Indian coal production under section 45... resources, and to 2013 sales of refined coal and Indian coal produced in the United States or a possession...

  16. 77 FR 21835 - Credit for Renewable Electricity Production, Refined Coal Production, and Indian Coal Production...

    Science.gov (United States)

    2012-04-11

    ..., Refined Coal Production, and Indian Coal Production, and Publication of Inflation Adjustment Factors and... electricity production, refined coal production, and Indian coal production under section 45. DATES: The 2012... sales of refined coal and Indian coal produced in the United States or a possession thereof. Inflation...

  17. The safety of fishery products

    OpenAIRE

    Zugravu Gheorghe, Adrian; Turek Rahoveanu, Maria Magdalena; Turek Rahoveanu, Adrian

    2012-01-01

    The paper follows two main objectives: to understand consumers' perception and image of fishery products and to identify communication levers in order to improve the perceived image of fishery products. Orientations in terms of communication are product-focused and aim at enhancing the reputation of products, consequently with impact on product consumption. The present research is focused on the fishery products, regardless of their presentation - fresh, frozen or processed. This paper conduc...

  18. An Explanatory Study of Lean Practices in Job Shop Production/ Special Job Production/ Discrete Production/ Batch Shop Production Industries

    OpenAIRE

    Lavlesh Kumar Sharma; Ravindra Mohan Saxena

    2014-01-01

    In this paper, the study explores the benefits and advantages of Lean Practices or Lean Thinking in Job shop production/ Special job production/ Discrete production/ Batch shop production industries. The Lean Practices have been applied more compatible in Job shop production than in the continuous/ mass production because of several barriers and hurdles in the industrial context that influence the whole processes again and again, this happens due to the lack of knowledge about...

  19. RECONSIDERING ECONOMIC PRODUCTIVITY

    Directory of Open Access Journals (Sweden)

    RIS A. MIHAI

    2014-12-01

    Full Text Available Economy has changed significantly over the past century, in part due to the scientific discoveries, due to the industrial revolution, to the research, development and innovation, but maybe the most important contributor to the economic development is the human resource. We have witnessed significant changes enhancing the levels of productivity, both labor and capital. This paper analyzes productivity in relation to its social and sustainability dimension. The paper follows a previous study, highlighting the most important findings identified and reinterpreting them on the basis of the most recent research papers produced by the scholars in the field. The analysis is focused on the most unsustainable economies worldwide, respectively, the United Arab Emirates, Qatar, Belgium, Kuwait, Singapore, Netherlands, Republic of Korea, Israel, Saudi Arabia, Macedonia, Japan and the United States of America – selected by considering their per capita ecological deficit. The research uses statistical data provided by the United Nations Development Program, the World Bank and the Global Footprint Network. The research combines economical, development and environmental indexes in our attempt to evaluate productivity and to adjust it so that it considers the ecological deficit of the nations. The research hypothesis that generated the study is: the levels of economic productivity obtained by countries are not limited by their biocapacities. The empirical analysis will verify the research question advocating for the need to consider the limited capacity of the planet, in term of natural resources, when promoting economic and social development.

  20. TRANSVERSELY POLARIZED Λ PRODUCTION

    International Nuclear Information System (INIS)

    BORER, D.

    2000-01-01

    Transversely polarized Λ production in hard scattering processes is discussed in terms of a leading twist T-odd fragmentation function which describes the fragmentation of an unpolarized quark into a transversely polarized Λ. We focus on the properties of this function and its relevance for the RHIC and HERMES experiments

  1. Maintaining productive earthmover performance

    Energy Technology Data Exchange (ETDEWEB)

    Chadwick, J.

    1992-01-01

    Maintenance management is essential to a productive mining operation. 80-90% of maintenance should be planned, the rest emergency. Many earthmover manufacturers offer extensive services to optimize machine productivity, e.g. equipment management software. Product support agreements (PSA) are becoming more common in open pit operations. These are normally agreements between mines and equipment dealers to provide product support requirements based on who can provide what most efficiently. The advantages for the customer are known servicing, cost effectiveness, minimum capital investment, and the fact PSAs are responsive to change. The operating experience of Round Mountain Gold, USA, Crouch Mining, UK, and Unatrac and Tractor Equipment, Ghana with PSAs is discussed. Crouch Mining operate England's largest open-cast coal operation, the Stobswood mine, Northumberland under contract to British Coal's Opencast-Executive. Crouch has agreed repair and maintenance contracts with 3 different dealer organisations for 3 separate machine fleets i.e. hydraulic excavators, a backhoe and 2 face shovels; 2 blasthole drills; and the 13 caterpillar trucks. These repair and maintenance contracts are described. 4 refs., 6 photos

  2. Forterra Concrete Products, Inc.

    Science.gov (United States)

    The EPA is providing notice of a proposed Administrative Penalty Assessment against Forterra Concrete Products, Inc., a business located at 511 E. John Carpenter Freeway, Irving, TX, 75062, for alleged violations at its facility located at 23600 W. 40th St

  3. Canadian heavy water production

    International Nuclear Information System (INIS)

    Dahlinger, A.; Lockerby, W.E.; Rae, H.K.

    1977-05-01

    The paper reviews Canadian experience in the production of heavy water, presents a long-term supply projection, relates this projection to the anticipated long-term electrical energy demand, and highlights principal areas for further improvement that form the bulk of our research and development program on heavy water processes

  4. Optimizing kaon production

    International Nuclear Information System (INIS)

    Berley, D.

    1976-01-01

    Kaon production data are examined with the view toward producing high quality beams in the future. Emphasis is placed upon the low momentum region, below 1 GeV/c, where the behavior of the kaon momentum spectrum is shown to be dominated by strongly momentum dependent kinematic factors. No complete experimental survey of production cross sections at different incident proton energies exists from a single apparatus. Information on relative production yields for different proton energies is important in the choice of parameters for an accelerator constructed primarily as a source of kaons. A summary is presented of existing kaon production facilities in the United States. These are all at proton accelerators. The possibility of using electron accelerators as kaon sources is examined. It is found that secondary beam fluxes can be contained at electron linacs, which are comparable to those obtained at proton synchrotrons. All kaon beam transport systems presently in use employ quadrupole and dipole magnet elements. A superconducting solenoid transport system has the potential advantage of much larger solid angle acceptance than the familiar quadrupole system. The possibility of mass separation by the differential energy loss method appears adaptable to the solenoid system

  5. Hadron production at SPEAR

    International Nuclear Information System (INIS)

    Schwitters, R.F.

    1975-01-01

    A report is given of the knowledge obtained from SPEAR about hadron production in e + e - annihilation since the discovery of the new particles. Included are the SPEAR magnetic detector, the total cross sections, mean charged multiplicity and energy, inclusive momentum spectra, and hadron angular distribution

  6. Southern pulpwood production, 1962

    Science.gov (United States)

    Joe F. Christopher; Martha E. Nelson

    1963-01-01

    Pulpwood production in the south rose to an all-time high of 25,586,300 cords in 1962-58 percent of the Nation's total. At the year's end, 80 southern pulpmills were operating; their combined daily pulping capacity was more than 52,000 tons. Nine mills outside the region were using wood grown in the South.

  7. Economics of microalgae production

    NARCIS (Netherlands)

    Acién, F.G.; Molina, E.; Fernández-Sevilla, J.M.; Barbosa, M.; Gouveia, L.; Sepúlveda, C.; Bazaes, J.; Arbib, Z.

    2017-01-01

    The economic analysis of biomass production is a critical step in ensuring the success of any microalgae-based industry. Until recently, only small-scale facilities of less than 10. ha have been in operation, but now large-scale facilities of more than 200. ha are being built and operated.

  8. Software product family evaluation

    NARCIS (Netherlands)

    van der Linden, F; Bosch, J; Kamsties, E; Kansala, K; Krzanik, L; Obbink, H; VanDerLinden, F

    2004-01-01

    This paper proposes a 4-dimensional software product family engineering evaluation model. The 4 dimensions relate to the software engineering concerns of business, architecture, organisation and process. The evaluation model is meant to be used within organisations to determine the status of their

  9. Lazy Productivity via Termination

    NARCIS (Netherlands)

    Endrullis, J.; Hendriks, R.D.A.

    2011-01-01

    We present a procedure for transforming strongly sequential constructor-based term rewriting systems (TRSs) into context-sensitive TRSs in such a way that productivity of the input system is equivalent to termination of the output system. Thereby automated termination provers become available for

  10. Production Farms at Fermilab

    International Nuclear Information System (INIS)

    Fischler, M.; Rinaldo, F.; Wolbers, S.

    1994-05-01

    UNIX Farms at Fermilab have been used for more than than three years to solve the problem of providing massive amounts of CPU processing power for event reconstruction. System configurations, parallel processing software, administration and allocation issues, production issues and other experiences and plans are discussed

  11. Teaching and Productivity.

    Science.gov (United States)

    Waxman, Hersholt C.; Walberg, Herbert J.

    1986-01-01

    Describes a theory of educational productivity that demonstrates the relationship between instructional practices and student outcomes. Identifies and discusses nine factors related to increasing student learning: ability, development, motivation, instructional quality, learning time, home environment, classroom social group, peer group, and use…

  12. Independence and Product Systems

    OpenAIRE

    Skeide, Michael

    2003-01-01

    Starting from elementary considerations about independence and Markov processes in classical probability we arrive at the new concept of conditional monotone independence (or operator-valued monotone independence). With the help of product systems of Hilbert modules we show that monotone conditional independence arises naturally in dilation theory.

  13. Production Functions Behaving Badly

    DEFF Research Database (Denmark)

    Fredholm, Thomas

    This paper reconsiders Anwar Shaikh's critique of the neoclassical theory of growth and distribution based on its use of aggregate production functions. This is done by reconstructing and extending Franklin M. Fisher's 1971 computer simulations, which Shaikh used to support his critique. Together...

  14. Microbial Propionic Acid Production

    Directory of Open Access Journals (Sweden)

    R. Axayacatl Gonzalez-Garcia

    2017-05-01

    Full Text Available Propionic acid (propionate is a commercially valuable carboxylic acid produced through microbial fermentation. Propionic acid is mainly used in the food industry but has recently found applications in the cosmetic, plastics and pharmaceutical industries. Propionate can be produced via various metabolic pathways, which can be classified into three major groups: fermentative pathways, biosynthetic pathways, and amino acid catabolic pathways. The current review provides an in-depth description of the major metabolic routes for propionate production from an energy optimization perspective. Biological propionate production is limited by high downstream purification costs which can be addressed if the target yield, productivity and titre can be achieved. Genome shuffling combined with high throughput omics and metabolic engineering is providing new opportunities, and biological propionate production is likely to enter the market in the not so distant future. In order to realise the full potential of metabolic engineering and heterologous expression, however, a greater understanding of metabolic capabilities of the native producers, the fittest producers, is required.

  15. Working hours and productivity

    NARCIS (Netherlands)

    Collewet, Marion; Sauermann, Jan

    2017-01-01

    This paper studies the link between working hours and productivity using daily information on working hours and performance of a sample of call centre agents. We exploit variation in the number of hours worked by the same employee across days and weeks due to central scheduling, enabling us to

  16. Product development leadership

    DEFF Research Database (Denmark)

    Lindgren, Peter

    2006-01-01

    Peter Lindgren introducerer i sin artikel begrebet ”Product Development Leadership”, som sætter fokus på produktudviklingens strategiske og markedsmæssige rolle. Begrebet omfatter bl.a. virksomhedens evne til at generere eller indfange ideer og udvikle disse via eksisterende eller nye måder...

  17. Exclusive Production at CMS

    CERN Document Server

    Walczak, Marek

    2016-01-01

    I briefly introduce so-called central exclusive production. I mainly focus on the example analyses that have been performed in the CMS experiment at CERN. I conclude with ideas and perspectives for future work that will be done during Run 2 of the LHC. I pay special attention to the ultraperipheral collisions.

  18. Kronecker Products on Preconditioning

    KAUST Repository

    Gao, Longfei

    2013-08-01

    Numerical techniques for linear systems arising from discretization of partial differential equations are nowadays essential for understanding the physical world. Among these techniques, iterative methods and the accompanying preconditioning techniques have become increasingly popular due to their great potential on large scale computation. In this work, we present preconditioning techniques for linear systems built with tensor product basis functions. Efficient algorithms are designed for various problems by exploiting the Kronecker product structure in the matrices, inherited from tensor product basis functions. Specifically, we design preconditioners for mass matrices to remove the complexity from the basis functions used in isogeometric analysis, obtaining numerical performance independent of mesh size, polynomial order and continuity order; we also present a compound iteration preconditioner for stiffness matrices in two dimensions, obtaining fast convergence speed; lastly, for the Helmholtz problem, we present a strategy to `hide\\' its indefiniteness from Krylov subspace methods by eliminating the part of initial error that corresponds to those negative generalized eigenvalues. For all three cases, the Kronecker product structure in the matrices is exploited to achieve high computational efficiency.

  19. IDEA: Stimulating Oral Production.

    Science.gov (United States)

    Easley, Jacob J.

    1995-01-01

    Presents daily activities that facilitate complete sentence response, promote oral production, and aid the learning of vocabulary in foreign-language classes. Because speech is the primary form of communication in the foreign-language classroom, it is important to stimulate students to converse as soon as possible. (Author/CK)

  20. Fermentative Alcohol Production

    DEFF Research Database (Denmark)

    Martín, Mariano; Sánchez, Antonio; Woodley, John M.

    2018-01-01

    In this chapter we present some of key principles of bioreactor design for the production of alcohols by fermentation of sugar and syngas . Due to the different feedstocks, a detailed analysis of the hydrodynamics inside the units , bubble columns or stirred tank reactors , the gas-liquid mass...

  1. Production of lentiviral vectors

    Directory of Open Access Journals (Sweden)

    Otto-Wilhelm Merten

    2016-01-01

    Full Text Available Lentiviral vectors (LV have seen considerably increase in use as gene therapy vectors for the treatment of acquired and inherited diseases. This review presents the state of the art of the production of these vectors with particular emphasis on their large-scale production for clinical purposes. In contrast to oncoretroviral vectors, which are produced using stable producer cell lines, clinical-grade LV are in most of the cases produced by transient transfection of 293 or 293T cells grown in cell factories. However, more recent developments, also, tend to use hollow fiber reactor, suspension culture processes, and the implementation of stable producer cell lines. As is customary for the biotech industry, rather sophisticated downstream processing protocols have been established to remove any undesirable process-derived contaminant, such as plasmid or host cell DNA or host cell proteins. This review compares published large-scale production and purification processes of LV and presents their process performances. Furthermore, developments in the domain of stable cell lines and their way to the use of production vehicles of clinical material will be presented.

  2. Selling new products

    NARCIS (Netherlands)

    Borgh, van der W.

    2012-01-01

    As we proceed into the 21st century, companies are facing increasingly complex and dynamic business environments. Many organizations have to deal with intense competition as more products are introduced faster, with shorter life cycles, and less competitive differentiation. Consequently, companies

  3. Means of Production

    Science.gov (United States)

    Raths, David

    2012-01-01

    No one who's worked in higher education will ever confuse the experience with working in the corporate sector. Colleges and universities are simply not geared for the business of manufacturing or marketing products. The focus--as it should be--is on teaching and research. Given the wealth of talent among IT staff and faculty, however, higher ed…

  4. Production of pure metals

    Science.gov (United States)

    Philipp, W. H.; Marsik, S. J.; May, C. E. (Inventor)

    1974-01-01

    A process for depositing elements by irradiating liquids is reported. Ultra pure elements are precipitated from aqueous solutions or suspensions of compounds. A solution of a salt of a metal to be prepared is irradiated, and the insoluble reaction product settles out. Some chemical compounds may also be prepared in this manner.

  5. FORECASTING NEW PRODUCT SALES

    Directory of Open Access Journals (Sweden)

    R. Siriram

    2012-01-01

    Full Text Available

    ENGLISH ABSTRACT: This paper tests the accuracy of using Linear regression, Logistics regression, and Bass curves in selected new product rollouts, based on sales data. The selected new products come from the electronics and electrical engineering and information and communications technology industries. The eight selected products are: electronic switchgear, electric motors, supervisory control and data acquisition systems, programmable logic controllers, cell phones, wireless modules, routers, and antennas. We compare the Linear regression, Logistics regression and Bass curves with respect to forecasting using analysis of variance. The accuracy of these three curves is studied and conclusions are drawn. We use an expert panel to compare the different curves and provide lessons for managers to improve forecasting new product sales. In addition, comparison between the two industries is drawn, and areas for further research are indicated.

    AFRIKAANSE OPSOMMING: Hierdie artikel toets die akkuraatheid van die gebruik van linêere regressie, logistiese regressie en Bass-krommes by die bekendstelling van nuwe produkte gebaseer op verkoopsdata. Die geselekteerde nuwe produkte is uit die elektriese en elektroniese asook informasietegnologie- en kommunikasie bedrywe. Linêere regressie, logistiese regressie en Bass-krommes word vergelyk ten opsigte van vooruitskatting deur variansie te ontleed. Die akkuraatheid word ontleed en gevolgtrekkings gemaak. Die doel is om vooruitskatting van nuwe produkverkope te verbeter.

  6. Driving product stewardship

    DEFF Research Database (Denmark)

    Moreno-Mantilla, Carlos Eduardo; Romero-Larrahondo, Paulo Andrés; Reyes Rodríguez, Juan Felipe

    , and conventional green competencies related to product development and manufacturing technologies, are related to each other and configure a corporate proactive approach towards the environment. The data used in this study were collected as part of a research project conducted in Bogotá, Colombia, and obtained...

  7. Potato production in Thailand

    Science.gov (United States)

    Potato production has increased dramatically in recent years in Thailand. Consumer demand for fresh and processed potatoes has driven this trend. Most potatoes are produced in northern Thailand in either double cropping highland zones or as a single winter crop following rice in lowland regions. Maj...

  8. Developing Green Line Products

    DEFF Research Database (Denmark)

    Muñoz-Marin, Ana Maria; Lassen, Astrid Heidemann; Poulsen, Søren Bolvig

    2011-01-01

    This publication is based on the Master thesis “User-driven ecoinnovation process: Towards the implementation of the Green product line at JELD-WEN” written by Ana Maria Muñoz-Marin as her Graduation Project for the MSc. Global Innovation Management degree. The company-based experiment was carried...

  9. Augmented Cellular Meat Production

    DEFF Research Database (Denmark)

    Rehm, Matthias; Philipsen, Mark Philip; Andersen, Rasmus Skovgaard

    2017-01-01

    The project is focused on a collaborative robot cell concept as an alternative to the serial production line that is currently used in major slaughterhouses. With a robot cell, where a robot and an operator share tasks and workload, we get the strength of the robot and the flexibility of the oper...

  10. Mycotoxins in poultry production

    Directory of Open Access Journals (Sweden)

    Resanović Radmila M.

    2009-01-01

    Full Text Available All poultry is sensitive to mycotoxins. This partly depends on the type, age and production categories of poultry, their living conditions and nutritive status and partly on the type, quantity and duration of mycotoxin ingestion. The presence of mycotoxins results in significant health disorders and a decrease in production performances. This leads to considerable economic loss for the poultry industry - either direct losses, i.e. death of the poultry or the indirect ones, i.e. the decrease in body mass, number and quality of eggs, greater food conversion, and immunosuppression. Immunosuppression results in increased sensitivity to infective agents and a bad vaccinal response. Morevover, mycotoxin residues in poultry meat, eggs and products derived from them pose a threat to human health. In order to prevent and reduce the negative implications of mycotoxins in the poultry production, it is necessary to create both global and national strategies for combatting mycotoxins, advance diagnostic techniques and procedures, intensify the control of food quality, introduce new limits on the maximum amount of mycotoxins allowed in food and poultry feed used for certain species and categories of animals, and synchronise it with the European standards.

  11. The productivity of trust

    DEFF Research Database (Denmark)

    Bjørnskov, Christian; Méon, Pierre-Guillaume

    This paper returns to one of the early questions of the literature on social trust, whether trust affects total factor productivity (TFP). Using both development and growth accounting, we find strong evidence of a causal effect of trust on the level and growth of TFP. Using a three-stage least...

  12. Prototypicality in Sentence Production

    Science.gov (United States)

    Onishi, Kristine H.; Murphy, Gregory L.; Bock, Kathryn

    2008-01-01

    Three cued-recall experiments examined the effect of category typicality on the ordering of words in sentence production. Past research has found that typical items tend to be mentioned before atypical items in a phrase--a pattern usually associated with lexical variables (like word frequency), and yet typicality is a conceptual variable.…

  13. Enhancing hospital productivity

    NARCIS (Netherlands)

    van Hulst, B.L.

    2016-01-01

    Healthcare expenditure in Western countries is substantial and outpaces economic growth, therefore cost containment in healthcare is high on the political agenda. One option is to increase productivity in healthcare, do more with less. This thesis uses the Dutch hospitals as a case-study and

  14. Entropy Production in Stochastics

    Directory of Open Access Journals (Sweden)

    Demetris Koutsoyiannis

    2017-10-01

    Full Text Available While the modern definition of entropy is genuinely probabilistic, in entropy production the classical thermodynamic definition, as in heat transfer, is typically used. Here we explore the concept of entropy production within stochastics and, particularly, two forms of entropy production in logarithmic time, unconditionally (EPLT or conditionally on the past and present having been observed (CEPLT. We study the theoretical properties of both forms, in general and in application to a broad set of stochastic processes. A main question investigated, related to model identification and fitting from data, is how to estimate the entropy production from a time series. It turns out that there is a link of the EPLT with the climacogram, and of the CEPLT with two additional tools introduced here, namely the differenced climacogram and the climacospectrum. In particular, EPLT and CEPLT are related to slopes of log-log plots of these tools, with the asymptotic slopes at the tails being most important as they justify the emergence of scaling laws of second-order characteristics of stochastic processes. As a real-world application, we use an extraordinary long time series of turbulent velocity and show how a parsimonious stochastic model can be identified and fitted using the tools developed.

  15. Productivity of stream definitions

    NARCIS (Netherlands)

    Endrullis, J.; Grabmayer, C.A.; Hendriks, D.; Isihara, A.; Klop, J.W.

    2008-01-01

    We give an algorithm for deciding productivity of a large and natural class of recursive stream definitions. A stream definition is called ‘productive’ if it can be evaluated continually in such a way that a uniquely determined stream in constructor normal form is obtained as the limit. Whereas

  16. Strangeness production with antiprotons

    International Nuclear Information System (INIS)

    Barnes, P.D.; Maher, C.J.

    1986-05-01

    New data from LEAR on the production of hyperon-antihyperon pairs in strong interactions is reported. The possibility of checking CP invariance in the anti ΛΛ system is reviewed together with plans to search for the ξ(2230) in the rho + anti rho → K/sub s/ + anti K/sub s/ reaction. 21 refs., 9 figs., 1 tab

  17. SaferProducts.gov

    Science.gov (United States)

    ... sent to your business before they are posted online. Sign up with the Business Portal to get reports quickly. Get Started Do ... Safe: Watch and Share Report an Unsafe Product Business Sign In Search Recalls/Repairs & Reports Advanced Search ... OF USE | PRIVACY | NO FEAR | OPEN GOVERNMENT ...

  18. Information Based Productivity.

    Science.gov (United States)

    Bennett, Scott

    A digital project undertaken last year at Yale (Connecticut) offers an opportunity to explore productivity matters. The project aimed at improving the quality of library support and of student learning in one of the most heavily enrolled undergraduate courses at Yale, "Introduction to the History of Art, from Prehistory to the…

  19. Modelling Retail Floorspace Productivity

    NARCIS (Netherlands)

    A.R. Thurik (Roy); P. Kooiman

    1986-01-01

    textabstractThis research note presents a "switching regime" model to investigate the impact of environmental factors on floorspace productivity of individual retail stores. The model includes independent supply and demand functions, which are incorporated within a sales maximizing framework. Unlike

  20. Zambian charcoal production

    International Nuclear Information System (INIS)

    Chidumayo, E.N.

    1993-01-01

    The recovery of miombo woodlands following clearance for woodfuel is being monitored at four sites in central Zambia. Charcoal production removes 50% of the total woody biomass and the woodland regenerates from a pool of stunted old seedlings and stumps of cut trees. Productivity is correlated to tree density before felling. Clearing of successive regrowth miombo does not appear to affect productivity. Annual wood biomass increment in unmanaged regrowth miombo is estimated at 2-3 t/ha pa of which about 1.1 t is cord wood suitable for charcoal production. However, the charcoal spots within the deforested area are severely impacted by the carbonization process which destroys soil structure, seedlings and root stocks. Woodland regeneration on such spots is protracted. Fortunately, charcoal spots only cover 2-3% of the deforested area. The concern about land degradation due to deforestation caused by woodfuel harvesting for urban charcoal in the miombo woodland region of central and southern Africa is not supported by the results of this study. (author)

  1. Product and Agent

    DEFF Research Database (Denmark)

    Montecino, Alex; Valero, Paola

    2015-01-01

    In this paper we will explore how the “mathematics teacher” becomes a subject and, at the same time, is subjected as part of diverse dispositive of power. We argue that the mathematics teacher becomes both a product and a social agent, which has been set, within current societies, from the ideas...

  2. Labeling of Cosmetic Products

    Directory of Open Access Journals (Sweden)

    Nicola Lionetti

    2018-03-01

    Full Text Available The labeling of cosmetic products provides a set of obligations, as reported in the Regulation 1223/2009, which came into force in Europe in July 2013. The indications reported on the label are intended to enable the clear identification of the functionality and proper use of cosmetics, ensure the protection of the consumer from the commercial aspects and, above all, from the safety point of view. Moreover, it should allow quick tracing of the product details and all info of toxicological relevance. However, the misuse of this tool often leads, on one side, to confusion among cosmetics, pharmaceuticals, medical devices, and biocides. On the other side, it gives rise to fanciful interpretations by a huge number of web users, who pretend to be able to judge the quality of a cosmetic product just by reading the ingredients list. This article points out the concrete purpose of cosmetic labels, in order to shed light on the use of certain categories of ‘controversial’ ingredients and on the real quality concepts of cosmetic products. Indeed, when properly interpreted, cosmetic labels represent a good tool for the professional investigation of adverse reactions to cosmetics.

  3. GLCF: Data & Products

    Science.gov (United States)

    Global Land Cover Facility About GLCF Research Publications Data & Products Gallery Library using the Earth Science Data Interface. Users are also asked to consider GLCF data policies, especially Guides * Data Policies * Restricted Access Quick Links * EROS Data Center * Global Change Master

  4. Smallholder Poultry Production

    DEFF Research Database (Denmark)

    Kryger, Karsten Nellemann; Thomsen, Karin; Whyte, Michael

    Smallholder poultry production is practised by most rural households throughout the developing world; despite the fact that its contribution to livelihoods appears to be of little nominal value when observed by researchers and other outsiders. This paper utilizes a Sustainable Livelihoods Framewo...

  5. Production of yttrium

    International Nuclear Information System (INIS)

    Day, J.G.

    1980-01-01

    A process is described for the production of yttrium metal, or of an alloy comprising a major proportion of yttrium, in which calcium (metal) and yttrium fluoride are reacted together by use of a submerged electric arc in a molten slag. (author)

  6. Design of resilient consumer products

    DEFF Research Database (Denmark)

    Haug, Anders

    2016-01-01

    Consumer product sustainability is a topic that has been of increasing interest to practice and academia in recent decades. In this context, a widely discussed means of achieving sustainability is to design more durable products, thereby reducing the need for the production of new products....... In particular, the emotional perspective on product durability has received attention in recent design literature, since consumer products are often replaced long before they become physically non-functioning. However, the literature does not provide a full account of the causes of product replacement...... for designers to design resilient consumer products and for researchers to engage in further studies....

  7. Pesticide Product Information System (PPIS)

    Data.gov (United States)

    U.S. Environmental Protection Agency — The Pesticide Product Information System contains information concerning all pesticide products registered in the United States. It includes registrant name and...

  8. Equipartition of entropy production

    International Nuclear Information System (INIS)

    Tondeur, D.

    1990-01-01

    This paper deals with the optimal design or operation of heat and mass transfer processes and develops the following conjecture: for a given duty, the best configuration of the process is that in which the entropy production rate is most uniformly distributed. This principle is first analyzed in detail on the simple example of tubular heat exchangers, and within the framework of linear irreversible thermodynamics. A main result is established, which states that the total entropy production is minimal when the local production is uniformly distributed (equipartition). Corollaries then result, which relate the entropy production and the variance of its distribution to economic factors such as the duty, the exchange area, the fluid flow-rates, and the temperature changes. The equipartition principle is then extended to multiple independent variables (time and space), multicomponent transfer, and non-linear but concave flux vs force relationship. Chemical Engineering examples are discussed, where the equipartition property has been applied implicitly or explicitly: design of distillation plates, cyclic distillation, optimal state of feed, and flow-sheets in chromatographic separations. Finally, a generalization of the equipartition principle is proposed, for systems with a distributed design variable (such as the size of the various elements of a system). The optimal distribution of investment is such that the investment in each element (properly amortized) is equal to the cost of irreversible energy degradation in this element. This is equivalent to saying that the ratio of these two quantities is uniformly distributed over the system, and reduces to equipartition of entropy production when the cost factors are constant over the whole system

  9. Productivity Sharing Programs: Can They Contribute to Productivity Improvement?

    Science.gov (United States)

    General Accounting Office, Washington, DC.

    Productivity sharing plans were studied to determine how they operate, what benefits result, and whether long-term increases in productivity can be realized through the program. Thirty-six firms were interviewed that had productivity sharing plans. Nine firms that had either rejected adoption of a productivity sharing plan or were still…

  10. Optimizing the order processing of customized products using product configuration

    DEFF Research Database (Denmark)

    Hvam, Lars; Bonev, Martin; Denkena, B.

    2011-01-01

    . Product configuration based on integrated modular product structure and product family architecture has been recognized as an effective means for implementing mass customization. In order to evaluate the effects of product configuration on order processing, a study has been conducted by the Department...... and its benefits for the order processing have been evaluated....

  11. Green product development : What does the country product space imply?

    NARCIS (Netherlands)

    Fraccascia, Luca; Giannoccaro, Ilaria; Albino, Vito

    This paper contributes to green product development by identifying the green products with the highest potential for growth in a country. To address our aim, we use the concept of product proximity and product space and, borrowing from the results of recent studies on complexity economics, we

  12. Productivity growth patterns in US dairy products manufacturing plants

    NARCIS (Netherlands)

    Geylani, P.C.; Stefanou, S.E.

    2011-01-01

    We analyse the productivity growth patterns in the US dairy products industry using the Census Bureau's plant-level data set. We decompose Total Factor Productivity (TFP) growth into the scale and technical change components and analyse variability of plants' productivity by constructing transition

  13. Biomimetic hydrogen production

    Energy Technology Data Exchange (ETDEWEB)

    Krassen, Henning

    2009-05-15

    Hydrogenases catalyze the reduction of protons to molecular hydrogen with outstanding efficiency. An electrode surface which is covered with active hydrogenase molecules becomes a promising alternative to platinum for electrochemical hydrogen production. To immobilize the hydrogenase on the electrode, the gold surface was modified by heterobifunctional molecules. A thiol headgroup on one side allowed the binding to the gold surface and the formation of a self-assembled monolayer. The other side of the molecules provided a surface with a high affinity for the hydrogenase CrHydA1 from Chlamydomonas reinhardtii. With methylviologen as a soluble energy carrier, electrons were transferred from carboxy-terminated electrodes to CrHydA1 and conducted to the active site (H-cluster), where they reduce protons to molecular hydrogen. A combined approach of surface-enhanced infrared absorption spectroscopy, gas chromatography, and surface plasmon resonance allowed quantifying the hydrogen production on a molecular level. Hydrogen was produced with a rate of 85 mol H{sub 2} min{sup -1} mol{sup -1}. On a 1'- benzyl-4,4'-bipyridinum (BBP)-terminated surface, the electrons were mediated by the monolayer and no soluble electron carrier was necessary to achieve a comparable hydrogen production rate (approximately 50% of the former system). The hydrogen evolution potential was determined to be -335 mV for the BBP-bound hydrogenase and -290 mV for the hydrogenase which was immobilized on a carboxy-terminated mercaptopropionic acid SAM. Therefore, both systems significantly reduce the hydrogen production overpotential and allow electrochemical hydrogen production at an energy level which is close to the commercially applied platinum electrodes (hydrogen evolution potential of -270 mV). In order to couple hydrogen production and photosynthesis, photosystem I (PS1) from Synechocystis PCC 6803 and membrane-bound hydrogenase (MBH) from Ralstonia eutropha were bound to each other

  14. Production of GMP certified herbal products in Malaysian Nuclear Agency

    International Nuclear Information System (INIS)

    Daryl Jesus Arapoc; Bohari Yaacob; Zainah Adam

    2015-01-01

    This paper will discuss on up scaling production of herbal product. A pilot scale production plant were developed in Block 37 and equipped with automated and semi-automated production machines which have the capacity to produce 100 thousand pieces of tablet per hour. In order to ensure the quality of the products, raw material inspections, IPQC and FPQC will be done on each batch. Besides that, certification of GMP will be done concurrently. One of the products that will be launch soon is the Mas Cotek tablet. This product is the result of numerous years of researches that had been done in BTP. This includes formulation and production of the product itself. It is hope that more herbal products can be produce in near future. (author)

  15. A model for optimizing the production of pharmaceutical products

    Directory of Open Access Journals (Sweden)

    Nevena Gospodinova

    2017-05-01

    Full Text Available The problem associated with the optimal production planning is especially relevant in modern industrial enterprises. The most commonly used optimality criteria in this context are: maximizing the total profit; minimizing the cost per unit of production; maximizing the capacity utilization; minimizing the total production costs. This article aims to explore the possibility for optimizing the production of pharmaceutical products through the construction of a mathematical model that can be viewed in two ways – as a single-product model and a multi-product model. As an optimality criterion it is set the minimization of the cost per unit of production for a given planning period. The author proposes an analytical method for solving the nonlinear optimization problem. An optimal production plan of Tylosin tartrate is found using the single-product model.

  16. Method for alignment of product and production concepts

    DEFF Research Database (Denmark)

    Pedersen, Rasmus; Kvist, Morten; Mortensen, Niels Henrik

    2005-01-01

    The right use of modular product architectures can help companies provide a great variety of customized products at a competitive price level, by reuse of knowledge, components, processes and utilization of economies of scale in many of the activities that are necessary to provide products...... for customers. Modular product architectures often serve as a basis for several products often referred to as product families. One or more product families may constitute a substantial amount of the total product portfolio of a company, and it is, therefore, of the greatest importance that concepts...... and solutions are evaluated thoroughly throughout the design phases because any design fault is likely to propagate to a large part of the business. Developing modular product architectures is therefore also the task of ensuring a fit between the products that can be made on the basis of the architecture...

  17. FUELS IN TOBACCO PRODUCTION

    Directory of Open Access Journals (Sweden)

    M. Čavlek

    2008-09-01

    Full Text Available Energy production from biomass can reduce „greenhouse effect” and contribute to solving energy security especially in the agricultural households which rely on energy from fossil fuels. In Croatia fuel-cured tobacco is produced on about 5000 ha. Gross income for the whole production is about 180 000 000 kn/year. Flue-cured tobacco is a high energy consuming crop. There are two parts of energy consumption, for mechanization used for the field production (11% and, energy for bulk-curing (89%. In each case, presently used fuels of fossil origin need to be substituted by an alternative energy source of organic origin. Hereafter attention is paid to finding a more economic and ecologically acceptable fuel for curing tobacco. Curing flue-cured tobacco is done by heated air in curing burns. Various sources of heat have been used; wood, coal, oil and gas. In each case different burning facilities of different efficiency have been used. This has had an impact on curing costs and ecology. Recently, mostly used fuel has been natural gas. However, gas is getting expensive. Consequently, an alternative fuel for curing tobacco is sought for. According to literature, agricultural crops suitable for the latter purpose could be wheat, barley, maize, sorghum, sugar beet and some other annual and perennial plant species. Wooden pellets (by-products are suitable for combustion too. Ligno-cellulose fuels have been used for heating since long time. However, not sufficient research has been done from an applied point of view (Venturi and Venturi, 2003. Fuel combustion is getting more efficient with developing technological innovations. The curing barn manufacturers are offering technology for combusting wooden pellets (by-products for curing tobacco. The pellets are available on domestic market. The same technology can be used for combustion of maize grain. Within “Hrvatski duhani” research on suitability of using wooden pellets and maize grain and whole

  18. Fickle product mix: Exporters adapting their product vectors across markets

    OpenAIRE

    Fontagné, Lionel; Secchi, Angelo; Tomasi, Chiara

    2014-01-01

    This paper analyzes how multi-product firms adjust their exported product-mix across desti- nations. Using cross sections of Italian and French data, we show that firms do not follow a rigid ordering in their product mix exported in different markets but rather they adapt their choices to better match with country characteristics. By using metrics based on export shares and on sequences of product names we provide new insights on the extent a firm's products portfolio changes across destinati...

  19. Productivity raising approaches in the logistic production system

    Directory of Open Access Journals (Sweden)

    Miroslav Rakyta

    2001-01-01

    Full Text Available This paper deals with the productivity of the logistic production system. The aim is to define the intermediate state of the production machines and equipment (OOE, identification of the material flows, idle time and breakdown forecasting, with the following purchase of the required spare parts. The goal of the system is the satisfaction of the customer´s needs and the minimalisation of not fulfilling the required terms for delivery with simultaneous increasing of the logistic production system productivity.

  20. PIGS BREEDING FOR THE PRODUCTION OF TRADITIONAL MEAT PRODUCTS

    Directory of Open Access Journals (Sweden)

    Đuro Senčić

    2014-06-01

    Full Text Available The fertile Slavonia is known for production of several types of cured meats: kulen, kulen sis, sausage, ham and bacon, and other pork products (“krvavica” - blood sausage, “švargl” - a type of brawn where chopped parts of head are stuffed inside the pig’s stomach, “čvarci” - a variant of pork crisps, fat. These products require “mature pigs” of adequate slaughter quality. Production of pigs intended for traditional meat products may take place in different production systems (open, closed, semi-open, “organic”. Each of these systems provides a specific quality of pigs for slaughter, reflecting on the quality of the final product. Production systems can have a significant impact on growth performance and carcass and meat quality of pigs. This effect arises from the interaction between housing conditions, the amount and composition of food and used pig genotype. The choice of a production system depends on local production conditions, pig genotype, consumer demand (market for a given product quality, and other factors. Due to their quality, the traditional Slavonian meat products can become a recognizable Croatian brand in both domestic and international markets. Production of standard quality products requires standard quality of pigs. Therefore this book is focused on such pigs production.