WorldWideScience

Sample records for production efficiency models

  1. BOREAS TE-17 Production Efficiency Model Images

    Data.gov (United States)

    National Aeronautics and Space Administration — A BOREAS version of the Global Production Efficiency Model(www.inform.umd.edu/glopem) was developed by TE-17 to generate maps of gross and net primary production,...

  2. An Efficiency Model For Hydrogen Production In A Pressurized Electrolyzer

    Energy Technology Data Exchange (ETDEWEB)

    Smoglie, Cecilia; Lauretta, Ricardo

    2010-09-15

    The use of Hydrogen as clean fuel at a world wide scale requires the development of simple, safe and efficient production and storage technologies. In this work, a methodology is proposed to produce Hydrogen and Oxygen in a self pressurized electrolyzer connected to separate containers that store each of these gases. A mathematical model for Hydrogen production efficiency is proposed to evaluate how such efficiency is affected by parasitic currents in the electrolytic solution. Experimental set-up and results for an electrolyzer are also presented. Comparison of empirical and analytical results shows good agreement.

  3. Separating environmental efficiency into production and abatement efficiency. A nonparametric model with application to U.S. power plants

    Energy Technology Data Exchange (ETDEWEB)

    Hampf, Benjamin

    2011-08-15

    In this paper we present a new approach to evaluate the environmental efficiency of decision making units. We propose a model that describes a two-stage process consisting of a production and an end-of-pipe abatement stage with the environmental efficiency being determined by the efficiency of both stages. Taking the dependencies between the two stages into account, we show how nonparametric methods can be used to measure environmental efficiency and to decompose it into production and abatement efficiency. For an empirical illustration we apply our model to an analysis of U.S. power plants.

  4. Numerical modeling of positive streamer in air in nonuniform fields: Efficiency of radicals production

    International Nuclear Information System (INIS)

    Kulikovsky, A.A.

    2001-01-01

    The efficiency of streamer corona depends on a number of factors such as geometry of electrodes, voltage pulse parameters, gas pressure etc. In a past 5 years a two-dimensional models of streamer in nonuniform fields in air have been developed. These models allow to simulate streamer dynamics and generation of species and to investigate the influence of external parameters on species production. In this work the influence of Laplacian field on efficiency of radicals generation is investigated

  5. Spatial extrapolation of light use efficiency model parameters to predict gross primary production

    Directory of Open Access Journals (Sweden)

    Karsten Schulz

    2011-12-01

    Full Text Available To capture the spatial and temporal variability of the gross primary production as a key component of the global carbon cycle, the light use efficiency modeling approach in combination with remote sensing data has shown to be well suited. Typically, the model parameters, such as the maximum light use efficiency, are either set to a universal constant or to land class dependent values stored in look-up tables. In this study, we employ the machine learning technique support vector regression to explicitly relate the model parameters of a light use efficiency model calibrated at several FLUXNET sites to site-specific characteristics obtained by meteorological measurements, ecological estimations and remote sensing data. A feature selection algorithm extracts the relevant site characteristics in a cross-validation, and leads to an individual set of characteristic attributes for each parameter. With this set of attributes, the model parameters can be estimated at sites where a parameter calibration is not possible due to the absence of eddy covariance flux measurement data. This will finally allow a spatially continuous model application. The performance of the spatial extrapolation scheme is evaluated with a cross-validation approach, which shows the methodology to be well suited to recapture the variability of gross primary production across the study sites.

  6. Estimation efficiency of usage satellite derived and modelled biophysical products for yield forecasting

    Science.gov (United States)

    Kolotii, Andrii; Kussul, Nataliia; Skakun, Sergii; Shelestov, Andrii; Ostapenko, Vadim; Oliinyk, Tamara

    2015-04-01

    Efficient and timely crop monitoring and yield forecasting are important tasks for ensuring of stability and sustainable economic development [1]. As winter crops pay prominent role in agriculture of Ukraine - the main focus of this study is concentrated on winter wheat. In our previous research [2, 3] it was shown that usage of biophysical parameters of crops such as FAPAR (derived from Geoland-2 portal as for SPOT Vegetation data) is far more efficient for crop yield forecasting to NDVI derived from MODIS data - for available data. In our current work efficiency of usage such biophysical parameters as LAI, FAPAR, FCOVER (derived from SPOT Vegetation and PROBA-V data at resolution of 1 km and simulated within WOFOST model) and NDVI product (derived from MODIS) for winter wheat monitoring and yield forecasting is estimated. As the part of crop monitoring workflow (vegetation anomaly detection, vegetation indexes and products analysis) and yield forecasting SPIRITS tool developed by JRC is used. Statistics extraction is done for landcover maps created in SRI within FP-7 SIGMA project. Efficiency of usage satellite based and modelled with WOFOST model biophysical products is estimated. [1] N. Kussul, S. Skakun, A. Shelestov, O. Kussul, "Sensor Web approach to Flood Monitoring and Risk Assessment", in: IGARSS 2013, 21-26 July 2013, Melbourne, Australia, pp. 815-818. [2] F. Kogan, N. Kussul, T. Adamenko, S. Skakun, O. Kravchenko, O. Kryvobok, A. Shelestov, A. Kolotii, O. Kussul, and A. Lavrenyuk, "Winter wheat yield forecasting in Ukraine based on Earth observation, meteorological data and biophysical models," International Journal of Applied Earth Observation and Geoinformation, vol. 23, pp. 192-203, 2013. [3] Kussul O., Kussul N., Skakun S., Kravchenko O., Shelestov A., Kolotii A, "Assessment of relative efficiency of using MODIS data to winter wheat yield forecasting in Ukraine", in: IGARSS 2013, 21-26 July 2013, Melbourne, Australia, pp. 3235 - 3238.

  7. Investigations of the efficiency of enzyme production technologies using modelling tools

    DEFF Research Database (Denmark)

    Albæk, Mads Orla; Gernaey, Krist; Hansen, Morten Skov

    Growing markets and new innovative applications of industrial enzymes leads to increased interest in efficient production of these products. Most industrial enzymes are currently produced in traditional stirred tank reactors in submerged fed batch culture. The limiting parameter in such processes...... fermentations of the filamentous fungus Trichoderma reesei in 550litre pilot scale stirred tank reactors for a range of process conditions. Based on the experimental data a process model has been created, which satisfactory simulates the effect of the changing process conditions: Aeration rate, agitation speed...

  8. Computational model for a high temperature electrolyzer coupled to a HTTR for efficient nuclear hydrogen production

    Energy Technology Data Exchange (ETDEWEB)

    Gonzalez, Daniel; Rojas, Leorlen; Rosales, Jesus; Castro, Landy; Gamez, Abel; Brayner, Carlos, E-mail: danielgonro@gmail.com [Universidade Federal de Pernambuco (UFPE), Recife, PE (Brazil); Garcia, Lazaro; Garcia, Carlos; Torre, Raciel de la, E-mail: lgarcia@instec.cu [Instituto Superior de Tecnologias y Ciencias Aplicadas (InSTEC), La Habana (Cuba); Sanchez, Danny [Universidade Estadual de Santa Cruz (UESC), Ilheus, BA (Brazil)

    2015-07-01

    High temperature electrolysis process coupled to a very high temperature reactor (VHTR) is one of the most promising methods for hydrogen production using a nuclear reactor as the primary heat source. However there are not references in the scientific publications of a test facility that allow to evaluate the efficiency of the process and other physical parameters that has to be taken into consideration for its accurate application in the hydrogen economy as a massive production method. For this lack of experimental facilities, mathematical models are one of the most used tools to study this process and theirs flowsheets, in which the electrolyzer is the most important component because of its complexity and importance in the process. A computational fluid dynamic (CFD) model for the evaluation and optimization of the electrolyzer of a high temperature electrolysis hydrogen production process flowsheet was developed using ANSYS FLUENT®. Electrolyzer's operational and design parameters will be optimized in order to obtain the maximum hydrogen production and the higher efficiency in the module. This optimized model of the electrolyzer will be incorporated to a chemical process simulation (CPS) code to study the overall high temperature flowsheet coupled to a high temperature accelerator driven system (ADS) that offers advantages in the transmutation of the spent fuel. (author)

  9. Computational model for a high temperature electrolyzer coupled to a HTTR for efficient nuclear hydrogen production

    International Nuclear Information System (INIS)

    Gonzalez, Daniel; Rojas, Leorlen; Rosales, Jesus; Castro, Landy; Gamez, Abel; Brayner, Carlos; Garcia, Lazaro; Garcia, Carlos; Torre, Raciel de la; Sanchez, Danny

    2015-01-01

    High temperature electrolysis process coupled to a very high temperature reactor (VHTR) is one of the most promising methods for hydrogen production using a nuclear reactor as the primary heat source. However there are not references in the scientific publications of a test facility that allow to evaluate the efficiency of the process and other physical parameters that has to be taken into consideration for its accurate application in the hydrogen economy as a massive production method. For this lack of experimental facilities, mathematical models are one of the most used tools to study this process and theirs flowsheets, in which the electrolyzer is the most important component because of its complexity and importance in the process. A computational fluid dynamic (CFD) model for the evaluation and optimization of the electrolyzer of a high temperature electrolysis hydrogen production process flowsheet was developed using ANSYS FLUENT®. Electrolyzer's operational and design parameters will be optimized in order to obtain the maximum hydrogen production and the higher efficiency in the module. This optimized model of the electrolyzer will be incorporated to a chemical process simulation (CPS) code to study the overall high temperature flowsheet coupled to a high temperature accelerator driven system (ADS) that offers advantages in the transmutation of the spent fuel. (author)

  10. Productivity and energy efficiency

    Energy Technology Data Exchange (ETDEWEB)

    Lovins, H. [Rocky Mountain Inst., Snowmass, CO (United States)

    1995-12-31

    Energy efficient building and office design offers the possibility of significantly increased worker productivity. By improving lighting, heating and cooling, workers can be made more comfortable and productive. An increase of 1 percent in productivity can provide savings to a company that exceed its entire energy bill. Efficient design practices are cost effective just from their energy savings. The resulting productivity gains make them indispensable. This paper documents eight cases in which efficient lighting, heating, and cooling have measurably increased worker productivity, decreased absenteeism, and/or improved the quality of work performed. They also show that efficient lighting can measurably increase work quality by removing errors and manufacturing defects. The case studies presented include retrofit of existing buildings and the design of new facilities, and cover a variety of commercial and industrial settings. Each case study identifies the design changes that were most responsible for increased productivity. As the eight case studies illustrate, energy efficient design may be one of the least expensive ways for a business to improve the productivity of its workers and the quality of its product. (author). 15 refs.

  11. Artificial neural networks: an efficient tool for modelling and optimization of biofuel production (a mini review)

    International Nuclear Information System (INIS)

    Sewsynker-Sukai, Yeshona; Faloye, Funmilayo; Kana, Evariste Bosco Gueguim

    2016-01-01

    In view of the looming energy crisis as a result of depleting fossil fuel resources and environmental concerns from greenhouse gas emissions, the need for sustainable energy sources has secured global attention. Research is currently focused towards renewable sources of energy due to their availability and environmental friendliness. Biofuel production like other bioprocesses is controlled by several process parameters including pH, temperature and substrate concentration; however, the improvement of biofuel production requires a robust process model that accurately relates the effect of input variables to the process output. Artificial neural networks (ANNs) have emerged as a tool for modelling complex, non-linear processes. ANNs are applied in the prediction of various processes; they are useful for virtual experimentations and can potentially enhance bioprocess research and development. In this study, recent findings on the application of ANN for the modelling and optimization of biohydrogen, biogas, biodiesel, microbial fuel cell technology and bioethanol are reviewed. In addition, comparative studies on the modelling efficiency of ANN and other techniques such as the response surface methodology are briefly discussed. The review highlights the efficiency of ANNs as a modelling and optimization tool in biofuel process development

  12. A chain information model for structured knowledge management: towards effective and efficient food product improvement

    NARCIS (Netherlands)

    Benner, M.; Geerts, R.F.R.; Linnemann, A.R.; Jongen, W.M.F.; Folstar, P.; Cnossen, H.J.

    2003-01-01

    New food products often fail, because they are not designed according to consumers' wishes or not produced efficiently. Frequently, the information required for an effective and efficient product development process is not relayed to the appropriate actor in the chain. This article presents a

  13. A chain information model for structured knowledge management: Towards effective and efficient food product improvement

    NARCIS (Netherlands)

    Benner, M.; Geerts, R.F.R.; Linnemann, A.R.; Jongen, W.M.F.; Folstar, P.; Cnossen, H.J.

    2003-01-01

    New food products often fail, because they are not designed according to consumers' wishes or not produced efficiently. Frequently, the information required for an effective and efficient product development process is not relayed to the appropriate actor in the chain. This article presents a

  14. Energy efficiency analysis method based on fuzzy DEA cross-model for ethylene production systems in chemical industry

    International Nuclear Information System (INIS)

    Han, Yongming; Geng, Zhiqiang; Zhu, Qunxiong; Qu, Yixin

    2015-01-01

    DEA (data envelopment analysis) has been widely used for the efficiency analysis of industrial production process. However, the conventional DEA model is difficult to analyze the pros and cons of the multi DMUs (decision-making units). The DEACM (DEA cross-model) can distinguish the pros and cons of the effective DMUs, but it is unable to take the effect of the uncertainty data into account. This paper proposes an efficiency analysis method based on FDEACM (fuzzy DEA cross-model) with Fuzzy Data. The proposed method has better objectivity and resolving power for the decision-making. First we obtain the minimum, the median and the maximum values of the multi-criteria ethylene energy consumption data by the data fuzzification. On the basis of the multi-criteria fuzzy data, the benchmark of the effective production situations and the improvement directions of the ineffective of the ethylene plants under different production data configurations are obtained by the FDEACM. The experimental result shows that the proposed method can improve the ethylene production conditions and guide the efficiency of energy utilization during ethylene production process. - Highlights: • This paper proposes an efficiency analysis method based on FDEACM (fuzzy DEA cross-model) with data fuzzification. • The proposed method is more efficient and accurate than other methods. • We obtain an energy efficiency analysis framework and process based on FDEACM in ethylene production industry. • The proposed method is valid and efficient in improvement of energy efficiency in the ethylene plants

  15. Spatially Explicit Estimation of Optimal Light Use Efficiency for Improved Satellite Data Driven Ecosystem Productivity Modeling

    Science.gov (United States)

    Madani, N.; Kimball, J. S.; Running, S. W.

    2014-12-01

    Remote sensing based light use efficiency (LUE) models, including the MODIS (MODerate resolution Imaging Spectroradiometer) MOD17 algorithm are commonly used for regional estimation and monitoring of vegetation gross primary production (GPP) and photosynthetic carbon (CO2) uptake. A common model assumption is that plants in a biome matrix operate at their photosynthetic capacity under optimal climatic conditions. A prescribed biome maximum light use efficiency parameter defines the maximum photosynthetic carbon conversion rate under prevailing climate conditions and is a large source of model uncertainty. Here, we used tower (FLUXNET) eddy covariance measurement based carbon flux data for estimating optimal LUE (LUEopt) over a North American domain. LUEopt was first estimated using tower observed daily carbon fluxes, meteorology and satellite (MODIS) observed fraction of photosynthetically active radiation (FPAR). LUEopt was then spatially interpolated over the domain using empirical models derived from independent geospatial data including global plant traits, surface soil moisture, terrain aspect, land cover type and percent tree cover. The derived LUEopt maps were then used as primary inputs to the MOD17 LUE algorithm for regional GPP estimation; these results were evaluated against tower observations and alternate MOD17 GPP estimates determined using Biome-specific LUEopt constants. Estimated LUEopt shows large spatial variability within and among different land cover classes indicated from a sparse North American tower network. Leaf nitrogen content and soil moisture are two important factors explaining LUEopt spatial variability. GPP estimated from spatially explicit LUEopt inputs shows significantly improved model accuracy against independent tower observations (R2 = 0.76; Mean RMSE plant trait information can explain spatial heterogeneity in LUEopt, leading to improved GPP estimates from satellite based LUE models.

  16. Computer modelling of the influences of a subsystems’ interaction on energetic efficiency of biofuel production systems

    Directory of Open Access Journals (Sweden)

    Wasiak Andrzej

    2017-01-01

    Full Text Available Energetic efficiency of biofuel production systems, as well as that of other fuels production systems, can be evaluated on the basis of modified EROEI indicator. In earlier papers, a new definition of the EROEI indicator was introduced. This approach enables the determination of this indicator separately for individual subsystems of a chosen production system, and therefore enables the studies of the influence of every subsystem on the energetic efficiency of the system as a whole. The method has been applied to the analysis of interactions between agricultural, internal transport subsystems, as well as preliminary studies of the effect of industrial subsystem.

  17. Observed and Model-Derived Ozone Production Efficiency over Urban and Rural New York State

    Directory of Open Access Journals (Sweden)

    Matthew Ninneman

    2017-07-01

    Full Text Available This study examined the model-derived and observed ozone production efficiency (OPE = ∆Ox/∆NOz in one rural location, Pinnacle State Park (PSP in Addison, New York (NY, and one urban location, Queens College (QC in Flushing, NY, in New York State (NYS during photo-chemically productive hours (11 a.m.–4 p.m. Eastern Standard Time (EST in summer 2016. Measurement data and model predictions from National Oceanic and Atmospheric Administration National Air Quality Forecast Capability (NOAA NAQFC—Community Multiscale Air Quality (CMAQ model versions 4.6 (v4.6 and 5.0.2 (v5.0.2 were used to assess the OPE at both sites. CMAQ-predicted and observed OPEs were often in poor agreement at PSP and in reasonable agreement at QC, with model-predicted and observed OPEs, ranging from approximately 5–11 and 10–13, respectively, at PSP; and 4–7 and 6–8, respectively, at QC. The observed relationship between OPE and oxides of nitrogen (NOx was studied at PSP to examine where the OPE downturn may have occurred. Summer 2016 observations at PSP did not reveal a distinct OPE downturn, but they did indicate that the OPE at PSP remained high (10 or greater regardless of the [NOx] level. The observed OPEs at QC were found by using species-specific reactive odd nitrogen (NOy instruments and an estimated value for nitrogen dioxide (NO2, since observed OPEs determined using non-specific NOx and NOy instruments yielded observed OPE results that (1 varied from approximately 11–25, (2 sometimes had negative [NOz] concentrations, and (3 were inconsistent with CMAQ-predicted OPE. This difference in observed OPEs at QC depending on the suite of instruments used suggests that species-specific NOx and NOy instruments may be needed to obtain reliable urban OPEs.

  18. The Evaluation of Efficiency of Production Management at Forestry Enterprise: Experience with Discriminantal and Applied Econometric Models

    Directory of Open Access Journals (Sweden)

    Pilko Andriy D.

    2017-07-01

    Full Text Available The publication is aimed at coverage of the results of a study on existing approaches to the setting and solving the task of evaluation and analysis of efficiency of management of production processes at forestry enterprises, as well as implementation and development (in line with the industry specificity of the previously proposed approach to evaluating, analyzing and forecasting the efficiency of management of the production process by means of development and application of the economic-mathematical modeling capabilities. A study on the efficiency of the production process management and the usage of enterprise’s basic production assets has been conducted with application of discriminantal and simultative econometric models. Further development of the proposed approach could provide an additional methodical basis for planning activities to improve the management of production at forestry enterprises.

  19. Field-scale modeling of acidity production and remediation efficiency during in situ reductive dechlorination

    Science.gov (United States)

    Brovelli, A.; Robinson, C. E.; Barry, D. A.; Gerhard, J.

    2009-12-01

    Enhanced reductive dechlorination is a viable technology for in situ remediation of chlorinated solvent DNAPL source areas. Although in recent years increased understanding of this technology has led to more rapid dechlorination rates, complete dechlorination can be hindered by unfavorable conditions. Hydrochloric acid produced from dechlorination and organic acids generated from electron donor fermentation can lead to significant groundwater acidification. Adverse pH conditions can inhibit the activity of dehalogenating microorganisms and thus slow or stall the remediation process. The extent of acidification likely to occur at a contaminated site depends on a number of factors including (1) the extent of dechlorination, (2) the pH-sensitivity of dechlorinating bacteria, and (3) the geochemical composition of the soil and water, in particular the soil’s natural buffering capacity. The substantial mass of solvents available for dechlorination when treating DNAPL source zones means that these applications are particularly susceptible to acidification. In this study a reactive transport biogeochemical model was developed to investigate the chemical and physical parameters that control the build-up of acidity and subsequent remediation efficiency. The model accounts for the site water chemistry, mineral precipitation and dissolution kinetics, electron donor fermentation, gas phase formation, competing electron-accepting processes (e.g., sulfate and iron reduction) and the sensitivity of microbial processes to pH. Confidence in the model was achieved by simulating a well-documented field study, for which the 2-D field scale model was able to reproduce long-term variations of pH, and the concurrent build up of reaction products. Sensitivity analyses indicated the groundwater flow velocity is able to reduce acidity build-up when the rate of advection is comparable or larger than the rate of dechlorination. The extent of pH change is highly dependent on the presence of

  20. Study on collection efficiency of fission products by spray: Experimental device and modelling

    Energy Technology Data Exchange (ETDEWEB)

    Ducret, D.; Roblot, D.; Vendel, J. [Institut de Protection et de Surete Nucleaire, Gif-Sur-Yvette (France); Billarand, Y. [ECCO Pharmacie et Chimie, Neuilly (France)

    1997-08-01

    Consequences of an hypothetical overheating reactor accident in nuclear power plants can be limited by spraying cold water drops into containment building. The spray reduces the pressure and the temperature levels by condensation of steam and leads to the washout of fission products (aerosols and gaseous iodine). The present study includes a large program devoted to the evaluation of realistic washout rates. An experimental device (named CARAIDAS) was designed and built in order to determine the collection efficiency of aerosols and iodine absorption by drops with representative conditions of post-accident atmosphere. This experimental device is presented in the paper and more particularly: (1) the experimental enclosure in which representative thermodynamic conditions can be achieved, (2) the monosized drops generator, the drops diameter measurement and the drops collector, (3) the cesium iodide aerosols generator and the aerosols measurements. Modelling of steam condensation on drops aerosols collection and iodine absorption are described. First experimental and code results on drops and aerosols behaviour are compared. 8 refs., 18 figs.

  1. Management model of productive capacity: integrating theory of constraints and the global operational efficiency index (IROG

    Directory of Open Access Journals (Sweden)

    Diego Augusto Pacheco

    2012-08-01

    Full Text Available This paper presents a model of management capacity in productive systems integrating the concepts of the Theory of Constraints and Total Productive Maintenance (TPM. The main objective of this study is to discuss and propose a model of management capacity, able to answer the following key questions: i capacity indicators which should be considered and how to measure them to measure the productive capacity of manufacturing systems? ii what is the real productive capacity of the system analyzed under a determined relationship between capacity and demand? The discussion of the proposed model is relevant because the definition of productive capacity system enables better management of resources and capabilities, improve production scheduling on the factory floor and meeting the demands imposed by the market. This paper presents the proposition of using the Operating Income Index Global (IROG with a different approach from traditional literature dealing with the theme, presented by Nakajima (1988. The results of this paper enable to develop a model to determine the capacity of the production system and the impact on the productive capacity of the entire system, not to consider the quality conformances that occur after the bottleneck resource of the production flow.

  2. The productivity and cost-efficiency of models for involving nurse practitioners in primary care: a perspective from queueing analysis.

    Science.gov (United States)

    Liu, Nan; D'Aunno, Thomas

    2012-04-01

    To develop simple stylized models for evaluating the productivity and cost-efficiencies of different practice models to involve nurse practitioners (NPs) in primary care, and in particular to generate insights on what affects the performance of these models and how. The productivity of a practice model is defined as the maximum number of patients that can be accounted for by the model under a given timeliness-to-care requirement; cost-efficiency is measured by the corresponding annual cost per patient in that model. Appropriate queueing analysis is conducted to generate formulas and values for these two performance measures. Model parameters for the analysis are extracted from the previous literature and survey reports. Sensitivity analysis is conducted to investigate the model performance under different scenarios and to verify the robustness of findings. Employing an NP, whose salary is usually lower than a primary care physician, may not be cost-efficient, in particular when the NP's capacity is underutilized. Besides provider service rates, workload allocation among providers is one of the most important determinants for the cost-efficiency of a practice model involving NPs. Capacity pooling among providers could be a helpful strategy to improve efficiency in care delivery. The productivity and cost-efficiency of a practice model depend heavily on how providers organize their work and a variety of other factors related to the practice environment. Queueing theory provides useful tools to take into account these factors in making strategic decisions on staffing and panel size selection for a practice model. © Health Research and Educational Trust.

  3. An efficient model for predicting mixing lengths in serial pumping of petroleum products

    Energy Technology Data Exchange (ETDEWEB)

    Baptista, Renan Martins [PETROBRAS S.A., Rio de Janeiro, RJ (Brazil). Centro de Pesquisas. Div. de Explotacao]. E-mail: renan@cenpes.petrobras.com.br; Rachid, Felipe Bastos de Freitas [Universidade Federal Fluminense, Niteroi, RJ (Brazil). Dept. de Engenharia Mecanica]. E-mail: rachid@mec.uff.br; Araujo, Jose Henrique Carneiro de [Universidade Federal Fluminense, Niteroi, RJ (Brazil). Dept. de Ciencia da Computacao]. E-mail: jhca@dcc.ic.uff.br

    2000-07-01

    This paper presents a new model for estimating mixing volumes which arises in batching transfers in multi product pipelines. The novel features of the model are the incorporation of the flow rate variation with time and the use of a more precise effective dispersion coefficient, which is considered to depend on the concentration. The governing equation of the model forms a non linear initial value problem that is solved by using a predictor corrector finite difference method. A comparison among the theoretical predictions of the proposed model, a field test and other classical procedures show that it exhibits the best estimate over the whole range of admissible concentrations investigated. (author)

  4. The role of research efficiency in the evolution of scientific productivity and impact: An agent-based model

    International Nuclear Information System (INIS)

    You, Zhi-Qiang; Han, Xiao-Pu; Hadzibeganovic, Tarik

    2016-01-01

    We introduce an agent-based model to investigate the effects of production efficiency (PE) and hot field tracing capability (HFTC) on productivity and impact of scientists embedded in a competitive research environment. Agents compete to publish and become cited by occupying the nodes of a citation network calibrated by real-world citation datasets. Our Monte-Carlo simulations reveal that differences in individual performance are strongly related to PE, whereas HFTC alone cannot provide sustainable academic careers under intensely competitive conditions. Remarkably, the negative effect of high competition levels on productivity can be buffered by elevated research efficiency if simultaneously HFTC is sufficiently low. - Highlights: • We study the role of production efficiency (PE) and research topic selectivity in the evolution of performance in academia. • In our model, agents compete to publish and become cited by occupying the nodes of an artificial citation network. • Our agent-based model is calibrated by using datasets from the APS journals and the arxiv.org online preprint repository. • Individual performance is strongly affected by PE, whereas topic selectivity cannot significantly enhance academic success. • With even minimal reductions of research efficiency gaps, fairly profound boosts of scientific careers can be achieved.

  5. The role of research efficiency in the evolution of scientific productivity and impact: An agent-based model

    Energy Technology Data Exchange (ETDEWEB)

    You, Zhi-Qiang [Alibaba Research Center for Complexity Sciences, Hangzhou Normal University, Hangzhou 311121 (China); Institute of Information Economy and Alibaba Business College, Hangzhou Normal University, Hangzhou 311121 (China); Han, Xiao-Pu, E-mail: xp@hznu.edu.cn [Alibaba Research Center for Complexity Sciences, Hangzhou Normal University, Hangzhou 311121 (China); Institute of Information Economy and Alibaba Business College, Hangzhou Normal University, Hangzhou 311121 (China); Hadzibeganovic, Tarik, E-mail: tarik.hadzibeganovic@gmail.com [Department of Psychology, University of Graz, 8010 Graz (Austria)

    2016-02-22

    We introduce an agent-based model to investigate the effects of production efficiency (PE) and hot field tracing capability (HFTC) on productivity and impact of scientists embedded in a competitive research environment. Agents compete to publish and become cited by occupying the nodes of a citation network calibrated by real-world citation datasets. Our Monte-Carlo simulations reveal that differences in individual performance are strongly related to PE, whereas HFTC alone cannot provide sustainable academic careers under intensely competitive conditions. Remarkably, the negative effect of high competition levels on productivity can be buffered by elevated research efficiency if simultaneously HFTC is sufficiently low. - Highlights: • We study the role of production efficiency (PE) and research topic selectivity in the evolution of performance in academia. • In our model, agents compete to publish and become cited by occupying the nodes of an artificial citation network. • Our agent-based model is calibrated by using datasets from the APS journals and the arxiv.org online preprint repository. • Individual performance is strongly affected by PE, whereas topic selectivity cannot significantly enhance academic success. • With even minimal reductions of research efficiency gaps, fairly profound boosts of scientific careers can be achieved.

  6. Computer-aided modeling for efficient and innovative product-process engineering

    DEFF Research Database (Denmark)

    Heitzig, Martina

    Model-based computer aided product-process engineering has attained increased importance in a number of industries, including pharmaceuticals, petrochemicals, fine chemicals, polymers, biotechnology, food, energy and water. This trend is set to continue due to the substantial benefits computer...... in chemical and biochemical engineering have been solved to illustrate the application of the generic modelling methodology, the computeraided modelling framework and the developed software tool.......-aided methods provide. The key prerequisite of computer-aided productprocess engineering is however the availability of models of different types, forms and application modes. The development of the models required for the systems under investigation tends to be a challenging, time-consuming and therefore cost...

  7. Monitoring Crop Productivity over the U.S. Corn Belt using an Improved Light Use Efficiency Model

    Science.gov (United States)

    Wu, X.; Xiao, X.; Zhang, Y.; Qin, Y.; Doughty, R.

    2017-12-01

    Large-scale monitoring of crop yield is of great significance for forecasting food production and prices and ensuring food security. Satellite data that provide temporally and spatially continuous information that by themselves or in combination with other data or models, raises possibilities to monitor and understand agricultural productivity regionally. In this study, we first used an improved light use efficiency model-Vegetation Photosynthesis Model (VPM) to simulate the gross primary production (GPP). Model evaluation showed that the simulated GPP (GPPVPM) could well captured the spatio-temporal variation of GPP derived from FLUXNET sites. Then we applied the GPPVPM to further monitor crop productivity for corn and soybean over the U.S. Corn Belt and benchmarked with county-level crop yield statistics. We found VPM-based approach provides pretty good estimates (R2 = 0.88, slope = 1.03). We further showed the impacts of climate extremes on the crop productivity and carbon use efficiency. The study indicates the great potential of VPM in estimating crop yield and in understanding of crop yield responses to climate variability and change.

  8. Estimation of technical efficiency and it's determinants in the hybrid maize production in district chiniot: a cobb douglas model approach

    International Nuclear Information System (INIS)

    Naqvi, S.A.A.; Ashfaq, M.

    2014-01-01

    High yielding crop like maize is very important for countries like Pakistan, which is third cereal crop after wheat and rice. Maize accounts for 4.8 percent of the total cropped area and 4.82 percent of the value of agricultural production. It is grown all over the country but major areas are Sahiwal, Okara and Faisalabad. Chiniot is one of the distinct agroecological domains of central Punjab for the maize cultivation, that's why this district was selected for the study and the technical efficiency of hybrid maize farmers was estimated. The primary data of 120 farmers, 40 farmers from each of the three tehsils of Chiniot were collected in the year 2011. Causes of low yields for various farmers than the others, while using the same input bundle were estimated. The managerial factors causing the inefficiency of production were also measured. The average technical efficiency was estimated to be 91 percent, while it was found to be 94.8, 92.7 and 90.8 for large, medium and small farmers, respectively. Stochastic frontier production model was used to measure technical efficiency. Statistical software Frontier 4.1 was used to analyse the data to generate inferences because the estimates of efficiency were produced as a direct output from package. It was concluded that the efficiency can be enhanced by covering the inefficiency from the environmental variables, farmers personal characteristics and farming conditions. (author)

  9. Efficient HVAC. New products

    International Nuclear Information System (INIS)

    2016-01-01

    Jung is responding to the challenge of energy efficiency, ease of operation and economic profitability in all of its solutions for the tertiary sector, whether for newly constructed buildings or refurbishments, for full management of the electrical system or the partial control of lighting, HVAC, mood settings, access control, etc., for the bedrooms or specific areas of the building. In the specific case of hotels, Jung offers each a custom-made solution in line with its possibilities and objectives. (Author)

  10. How can we use a mathematical model in order to analyze and improve the efficiency of a productive activity?

    Directory of Open Access Journals (Sweden)

    Mariana Nikolla

    2017-07-01

    Full Text Available Beer business industry is one of the most profitable agro-processing industries in the country. It has increased by expanding local and international market. There are 80 small and large beer factories that have their activity in Albania. The leading domestic beer manufacturers are: "Stela" beer, “Tirana” beer, “Korca” beer, “Kaon” beer, “Norga” beer, etc. They have invested millions of euros in terms of improving the quality of their production. Stela beer was the fi rst private beer active in the Albanian market. Its factory production founders of Stela beer responded to the market by investing in the development of technology, modern equipment and science. Stela beer processing and production systems have been improved continuously. The investments today are at around 20 million dollars. The factory has a considerable number of employees and a production capacity of around 250,000 hl per year. This article uses information obtained for beer production during the period 2003-2016. Through nonparametric mathematical model Dea, the impact of production factors such as investment, advertising, expenses, capital and number of employees in the production of beer during the study period is analyzed. The analysis showed that the best years or more efficient years in the use of the quantity of inputs for the period 2003-2016 are 2007, 2014 and 2015. The years 2003, 2010 and 2012 are less efficient by Dea analysis. The study also showed the best possible combinations of inputs improving the efficiency of inefficient years in the Stela Beer production.

  11. A Production Efficiency Model-Based Method for Satellite Estimates of Corn and Soybean Yields in the Midwestern US

    Directory of Open Access Journals (Sweden)

    Andrew E. Suyker

    2013-11-01

    Full Text Available Remote sensing techniques that provide synoptic and repetitive observations over large geographic areas have become increasingly important in studying the role of agriculture in global carbon cycles. However, it is still challenging to model crop yields based on remotely sensed data due to the variation in radiation use efficiency (RUE across crop types and the effects of spatial heterogeneity. In this paper, we propose a production efficiency model-based method to estimate corn and soybean yields with MODerate Resolution Imaging Spectroradiometer (MODIS data by explicitly handling the following two issues: (1 field-measured RUE values for corn and soybean are applied to relatively pure pixels instead of the biome-wide RUE value prescribed in the MODIS vegetation productivity product (MOD17; and (2 contributions to productivity from vegetation other than crops in mixed pixels are deducted at the level of MODIS resolution. Our estimated yields statistically correlate with the national survey data for rainfed counties in the Midwestern US with low errors for both corn (R2 = 0.77; RMSE = 0.89 MT/ha and soybeans (R2 = 0.66; RMSE = 0.38 MT/ha. Because the proposed algorithm does not require any retrospective analysis that constructs empirical relationships between the reported yields and remotely sensed data, it could monitor crop yields over large areas.

  12. Performance of a two-leaf light use efficiency model for mapping gross primary productivity against remotely sensed sun-induced chlorophyll fluorescence data.

    Science.gov (United States)

    Zan, Mei; Zhou, Yanlian; Ju, Weimin; Zhang, Yongguang; Zhang, Leiming; Liu, Yibo

    2018-02-01

    Estimating terrestrial gross primary production is an important task when studying the carbon cycle. In this study, the ability of a two-leaf light use efficiency model to simulate regional gross primary production in China was validated using satellite Global Ozone Monitoring Instrument - 2 sun-induced chlorophyll fluorescence data. The two-leaf light use efficiency model was used to estimate daily gross primary production in China's terrestrial ecosystems with 500-m resolution for the period from 2007 to 2014. Gross primary production simulated with the two-leaf light use efficiency model was resampled to a spatial resolution of 0.5° and then compared with sun-induced chlorophyll fluorescence. During the study period, sun-induced chlorophyll fluorescence and gross primary production simulated by the two-leaf light use efficiency model exhibited similar spatial and temporal patterns in China. The correlation coefficient between sun-induced chlorophyll fluorescence and monthly gross primary production simulated by the two-leaf light use efficiency model was significant (pproduction simulated by the two-leaf light use efficiency model were similar in spring and autumn in most vegetated regions, but dissimilar in winter and summer. The spatial variability of sun-induced chlorophyll fluorescence and gross primary production simulated by the two-leaf light use efficiency model was similar in spring, summer, and autumn. The proportion of spatial variations of sun-induced chlorophyll fluorescence and annual gross primary production simulated by the two-leaf light use efficiency model explained by ranged from 0.76 (2011) to 0.80 (2013) during the study period. Overall, the two-leaf light use efficiency model was capable of capturing spatial and temporal variations in gross primary production in China. However, the model needs further improvement to better simulate gross primary production in summer. Copyright © 2017 Elsevier B.V. All rights reserved.

  13. Photosynthetic properties of erect leaf maize inbred lines as the efficient photo-model in breeding and seed production

    Directory of Open Access Journals (Sweden)

    Radenović Čedomir N.

    2003-01-01

    Full Text Available The initial idea of this study was a hypothesis that erect leaf maize inbred lines were characterized by properties of an efficient photo-model and that as such were very desirable in increasing the number of plants per area unit (plant density in the process of contemporary selection and seed production. The application of a non-invasive bioluminescence-photosynthetic method, suitable for the efficiency estimation of the photo-model, verified the hypothesis. Obtained photosynthetic properties of observed erect leaf maize inbred lines were based on the effects and characteristics of thermal processes of delayed chlorophyll fluorescence occurring in their thylakoid membranes. The temperature dependence of the delayed chlorophyll fluorescence intensity phase transitions (critical temperatures in the thylakoid membranes and activation energy are the principal parameters of the thermal processes. Based on obtained photosynthetic properties it is possible to select erect leaf maize inbred lines that are resistant and tolerant to high and very high temperatures, as well as, to drought. They could be good and efficient photo-models wherewith.

  14. A simple model-based control for Pichia pastoris allows a more efficient heterologous protein production bioprocess.

    Science.gov (United States)

    Cos, Oriol; Ramon, Ramon; Montesinos, José Luis; Valero, Francisco

    2006-09-05

    A predictive control algorithm coupled with a PI feedback controller has been satisfactorily implemented in the heterologous Rhizopus oryzae lipase production by Pichia pastoris methanol utilization slow (Mut(s)) phenotype. This control algorithm has allowed the study of the effect of methanol concentration, ranging from 0.5 to 1.75 g/L, on heterologous protein production. The maximal lipolytic activity (490 UA/mL), specific yield (11,236 UA/g(biomass)), productivity (4,901 UA/L . h), and specific productivity (112 UA/g(biomass)h were reached for a methanol concentration of 1 g/L. These parameters are almost double than those obtained with a manual control at a similar methanol set-point. The study of the specific growth, consumption, and production rates showed different patterns for these rates depending on the methanol concentration set-point. Results obtained have shown the need of implementing a robust control scheme when reproducible quality and productivity are sought. It has been demonstrated that the model-based control proposed here is a very efficient, robust, and easy-to-implement strategy from an industrial application point of view. (c) 2006 Wiley Periodicals, Inc.

  15. New process modeling[sic], design, and control strategies for energy efficiency, high product quality, and improved productivity in the process industries. Final project report; FINAL

    International Nuclear Information System (INIS)

    Ray, W. Harmon

    2002-01-01

    This project was concerned with the development of process design and control strategies for improving energy efficiency, product quality, and productivity in the process industries. In particular, (i) the resilient design and control of chemical reactors, and (ii) the operation of complex processing systems, was investigated. Specific topics studied included new process modeling procedures, nonlinear controller designs, and control strategies for multiunit integrated processes. Both fundamental and immediately applicable results were obtained. The new design and operation results from this project were incorporated into computer-aided design software and disseminated to industry. The principles and design procedures have found their way into industrial practice

  16. Productivity benefits of industrial energy efficiency measures

    Energy Technology Data Exchange (ETDEWEB)

    Worrell, Ernst; Laitner, John A.; Michael, Ruth; Finman, Hodayah

    2004-08-30

    We review the relationship between energy efficiency improvement measures and productivity in industry. We review over 70 industrial case studies from widely available published databases, followed by an analysis of the representation of productivity benefits in energy modeling. We propose a method to include productivity benefits in the economic assessment of the potential for energy efficiency improvement. The case-study review suggests that energy efficiency investments can provide a significant boost to overall productivity within industry. If this relationship holds, the description of energy-efficient technologies as opportunities for larger productivity improvements has significant implications for conventional economic assessments. The paper explores the implications this change in perspective on the evaluation of energy-efficient technologies for a study of the iron and steel industry in the US. This examination shows that including productivity benefits explicitly in the modeling parameters would double the cost-effective potential for energy efficiency improvement, compared to an analysis excluding those benefits. We provide suggestions for future research in this important area.

  17. An efficiency correction model

    NARCIS (Netherlands)

    Francke, M.K.; de Vos, A.F.

    2009-01-01

    We analyze a dataset containing costs and outputs of 67 American local exchange carriers in a period of 11 years. This data has been used to judge the efficiency of BT and KPN using static stochastic frontier models. We show that these models are dynamically misspecified. As an alternative we

  18. PRODUCT EFFICIENCY IN THE SPANISH AUTOMOBILE MARKET

    Directory of Open Access Journals (Sweden)

    González, Eduardo

    2013-01-01

    Full Text Available This paper evaluates product efficiency in the Spanish automobile market. We use non parametric frontier techniques in order to estimate product efficiency scores for each model. These scores reflect the minimum price for which each car could be sold, given the bundle of tangible features it offers in comparison to the best-buy models. Unlike previous research, we use discounted prices which have been adjusted by car dealerships to meet sale targets. Therefore, we interpret the efficiency scores as indicators of the value of the intangible features of the brand. The results show that Audi, Volvo, Volkswagen and Mercedes offer the greatest intangible value, since they are heavily overpriced in terms of price/product ratios. Conversely, Seat, Kia, Renault and Dacia are the brands that can be taken as referent in terms of price/product ratios.

  19. Piecewise Loglinear Estimation of Efficient Production Surfaces

    OpenAIRE

    Rajiv D. Banker; Ajay Maindiratta

    1986-01-01

    Linear programming formulations for piecewise loglinear estimation of efficient production surfaces are derived from a set of basic properties postulated for the underlying production possibility sets. Unlike the piecewise linear model of Banker, Charnes, and Cooper (Banker R. D., A. Charnes, W. W. Cooper. 1984. Models for the estimation of technical and scale inefficiencies in data envelopment analysis. Management Sci. 30 (September) 1078--1092.), this approach permits the identification of ...

  20. Iron control on global productivity: an efficient inverse model of the ocean's coupled phosphate and iron cycles.

    Science.gov (United States)

    Pasquier, B.; Holzer, M.; Frants, M.

    2016-02-01

    We construct a data-constrained mechanistic inverse model of the ocean's coupled phosphorus and iron cycles. The nutrient cycling is embedded in a data-assimilated steady global circulation. Biological nutrient uptake is parameterized in terms of nutrient, light, and temperature limitations on growth for two classes of phytoplankton that are not transported explicitly. A matrix formulation of the discretized nutrient tracer equations allows for efficient numerical solutions, which facilitates the objective optimization of the key biogeochemical parameters. The optimization minimizes the misfit between the modelled and observed nutrient fields of the current climate. We systematically assess the nonlinear response of the biological pump to changes in the aeolian iron supply for a variety of scenarios. Specifically, Green-function techniques are employed to quantify in detail the pathways and timescales with which those perturbations are propagated throughout the world oceans, determining the global teleconnections that mediate the response of the global ocean ecosystem. We confirm previous findings from idealized studies that increased iron fertilization decreases biological production in the subtropical gyres and we quantify the counterintuitive and asymmetric response of global productivity to increases and decreases in the aeolian iron supply.

  1. Production and efficiency analysis with R

    CERN Document Server

    Behr, Andreas

    2015-01-01

    This textbook introduces essential topics and techniques in production and efficiency analysis and shows how to apply these methods using the statistical software R. Numerous small simulations lead to a deeper understanding of random processes assumed in the models and of the behavior of estimation techniques. Step-by-step programming provides an understanding of advanced approaches such as stochastic frontier analysis and stochastic data envelopment analysis. The text is intended for master students interested in empirical production and efficiency analysis. Readers are assumed to have a general background in production economics and econometrics, typically taught in introductory microeconomics and econometrics courses.

  2. Efficient polarimetric BRDF model.

    Science.gov (United States)

    Renhorn, Ingmar G E; Hallberg, Tomas; Boreman, Glenn D

    2015-11-30

    The purpose of the present manuscript is to present a polarimetric bidirectional reflectance distribution function (BRDF) model suitable for hyperspectral and polarimetric signature modelling. The model is based on a further development of a previously published four-parameter model that has been generalized in order to account for different types of surface structures (generalized Gaussian distribution). A generalization of the Lambertian diffuse model is presented. The pBRDF-functions are normalized using numerical integration. Using directional-hemispherical reflectance (DHR) measurements, three of the four basic parameters can be determined for any wavelength. This simplifies considerably the development of multispectral polarimetric BRDF applications. The scattering parameter has to be determined from at least one BRDF measurement. The model deals with linear polarized radiation; and in similarity with e.g. the facet model depolarization is not included. The model is very general and can inherently model extreme surfaces such as mirrors and Lambertian surfaces. The complex mixture of sources is described by the sum of two basic models, a generalized Gaussian/Fresnel model and a generalized Lambertian model. Although the physics inspired model has some ad hoc features, the predictive power of the model is impressive over a wide range of angles and scattering magnitudes. The model has been applied successfully to painted surfaces, both dull and glossy and also on metallic bead blasted surfaces. The simple and efficient model should be attractive for polarimetric simulations and polarimetric remote sensing.

  3. Roots, plant production and nutrient use efficiency

    NARCIS (Netherlands)

    Willigen, de P.; Noordwijk, van M.

    1987-01-01

    The role of roots in obtaining high crop production levels as well as a high nutrient use efficiency is discussed. Mathematical models of diffusion and massflow of solutes towards roots are developed for a constant daily uptake requirement. Analytical solutions are given for simple and more

  4. Experimental demonstration of the reverse flow catalytic membrane reactor concept for energy efficient syngas production. Part 2: Model development

    NARCIS (Netherlands)

    Smit, J.; Bekink, G.J.; Sint Annaland, van M.; Kuipers, J.A.M.

    2007-01-01

    In this contribution the technical feasibility of the reverse flow catalytic membrane reactor (RFCMR) concept with porous membranes for energy efficient syngas production is investigated. In earlier work an experimental proof of principle was already provided [Smit, J., Bekink, G.J., van Sint

  5. A modified indirect mathematical model for evaluation of ethanol production efficiency in industrial-scale continuous fermentation processes.

    Science.gov (United States)

    Canseco Grellet, M A; Castagnaro, A; Dantur, K I; De Boeck, G; Ahmed, P M; Cárdenas, G J; Welin, B; Ruiz, R M

    2016-10-01

    To calculate fermentation efficiency in a continuous ethanol production process, we aimed to develop a robust mathematical method based on the analysis of metabolic by-product formation. This method is in contrast to the traditional way of calculating ethanol fermentation efficiency, where the ratio between the ethanol produced and the sugar consumed is expressed as a percentage of the theoretical conversion yield. Comparison between the two methods, at industrial scale and in sensitivity studies, showed that the indirect method was more robust and gave slightly higher fermentation efficiency values, although fermentation efficiency of the industrial process was found to be low (~75%). The traditional calculation method is simpler than the indirect method as it only requires a few chemical determinations in samples collected. However, a minor error in any measured parameter will have an important impact on the calculated efficiency. In contrast, the indirect method of calculation requires a greater number of determinations but is much more robust since an error in any parameter will only have a minor effect on the fermentation efficiency value. The application of the indirect calculation methodology in order to evaluate the real situation of the process and to reach an optimum fermentation yield for an industrial-scale ethanol production is recommended. Once a high fermentation yield has been reached the traditional method should be used to maintain the control of the process. Upon detection of lower yields in an optimized process the indirect method should be employed as it permits a more accurate diagnosis of causes of yield losses in order to correct the problem rapidly. The low fermentation efficiency obtained in this study shows an urgent need for industrial process optimization where the indirect calculation methodology will be an important tool to determine process losses. © 2016 The Society for Applied Microbiology.

  6. Efficiency and productivity of hospitals in Vietnam.

    Science.gov (United States)

    Pham, Thuy Linh

    2011-01-01

    The purpose of this paper is to examine the relative efficiency and productivity of hospitals during the health reform process. Data envelopment analyses method (DEA) with the input-oriented variable-returns-to-scale model was used to calculate efficiency scores. Malmquist total factor productivity index approach was then employed to calculate productivity of hospitals. Data of 101 hospitals was extracted from databases of the Ministry of Health, Vietnam from the years 1998 to 2006. There was evidence of improvement in overall technical efficiency from 65 per cent in 1998 to 76 per cent in 2006. Hospitals' productivity progressed around 1.4 per cent per year, which was mainly due to the technical efficiency improvement. Furthermore, provincial hospitals were more technically efficient than their central counterparts and hospitals located in different regions performed differently. The paper provides an insight in the performance of Vietnamese public hospitals that has been rarely examined before and contributes to the existing literature of hospital performance in developing countries

  7. Efficiency and Productivity of County-level Public Hospitals Based on the Data Envelopment Analysis Model and Malmquist Index in Anhui, China.

    Science.gov (United States)

    Li, Nian-Nian; Wang, Cun-Hui; Ni, Hong; Wang, Heng

    2017-12-05

    China began to implement the national medical and health system and public hospital reforms in 2009 and 2012, respectively. Anhui Province is one of the four pilot provinces, and the medical reform measures received wide attention nationwide. The effectiveness of the above reform needs to get attention. This study aimed to master the efficiency and productivity of county-level public hospitals based on the data envelopment analysis (DEA) model and Malmquist index in Anhui, China, and then provide improvement measures for the future hospital development. We chose 12 country-level hospitals based on geographical distribution and the economic development level in Anhui Province. Relevant data that were collected in the field and then sorted were provided by the administrative departments of the hospitals. DEA models were used to calculate the dynamic efficiency and Malmquist index factors for the 12 institutions. During 2010-2015, the overall average relative service efficiency of 12 county-level public hospitals was 0.926, and the number of hospitals achieved an effective DEA for each year from 2010 to 2015 was 4, 6, 7, 7, 6, and 8, respectively, as measured using DEA. During this same period, the average overall production efficiency was 0.983, and the total productivity factor had declined. The overall production efficiency of five hospitals was >1, and the rest are productivity has not been effectively improved. County-level public hospitals need to combine their own reality to find their own deficiencies.

  8. Efficiency model of Russian banks

    OpenAIRE

    Pavlyuk, Dmitry

    2006-01-01

    The article deals with problems related to the stochastic frontier model of bank efficiency measurement. The model is used to study the efficiency of the banking sector of The Russian Federation. It is based on the stochastic approach both to the efficiency frontier location and to individual bank efficiency values. The model allows estimating bank efficiency values, finding relations with different macro- and microeconomic factors and testing some economic hypotheses.

  9. Model Novaes for analysis of the productivity and efficiency of logistics operators in Brazil: a study of its applicability for the years 2005 and 2006

    Directory of Open Access Journals (Sweden)

    Emanuel Rodrigues Junqueira

    2008-07-01

    Full Text Available The study presents a proposal to upgrade the production function to evaluate the productivity and efficiency of Brazilians logistics operators, which was developed by Novaes in his study in 2000. The goal was identify if and how the variables used continued to explain the behavior of productivity of these companies. To achieve that goal, tests were performed with data of years for 2005 and 2006, provided by the Revista Tecnologística, and used the same statistical techniques developed in the previous study, the multiple regression. The previous study intended to help the competitive advantage of logistics operators attentive to the problem, through the methodology of analysis of competitors and to customers of this service along the supply chain management, interested in identifying companies with greater efficiency. The results indicate that the model developed by Novaes is not valid for the current reality of these companies. Key-words: productivity function; logistic operators; analysis of competitors and suppliers.

  10. Modelling impacts of performance on the probability of reproducing, and thereby on productive lifespan, allow prediction of lifetime efficiency in dairy cows.

    Science.gov (United States)

    Phuong, H N; Blavy, P; Martin, O; Schmidely, P; Friggens, N C

    2016-01-01

    Reproductive success is a key component of lifetime efficiency - which is the ratio of energy in milk (MJ) to energy intake (MJ) over the lifespan, of cows. At the animal level, breeding and feeding management can substantially impact milk yield, body condition and energy balance of cows, which are known as major contributors to reproductive failure in dairy cattle. This study extended an existing lifetime performance model to incorporate the impacts that performance changes due to changing breeding and feeding strategies have on the probability of reproducing and thereby on the productive lifespan, and thus allow the prediction of a cow's lifetime efficiency. The model is dynamic and stochastic, with an individual cow being the unit modelled and one day being the unit of time. To evaluate the model, data from a French study including Holstein and Normande cows fed high-concentrate diets and data from a Scottish study including Holstein cows selected for high and average genetic merit for fat plus protein that were fed high- v. low-concentrate diets were used. Generally, the model consistently simulated productive and reproductive performance of various genotypes of cows across feeding systems. In the French data, the model adequately simulated the reproductive performance of Holsteins but significantly under-predicted that of Normande cows. In the Scottish data, conception to first service was comparably simulated, whereas interval traits were slightly under-predicted. Selection for greater milk production impaired the reproductive performance and lifespan but not lifetime efficiency. The definition of lifetime efficiency used in this model did not include associated costs or herd-level effects. Further works should include such economic indicators to allow more accurate simulation of lifetime profitability in different production scenarios.

  11. Product Platform Modeling

    DEFF Research Database (Denmark)

    Pedersen, Rasmus

    for customisation of products. In many companies these changes in the business environment have created a controversy between the need for a wide variety of products offered to the marketplace and a desire to reduce variation within the company in order to increase efficiency. Many companies use the concept...... other. These groups can be varied and combined to form different product variants without increasing the internal variety in the company. Based on the Theory of Domains, the concept of encapsulation in the organ domain is introduced, and organs are formulated as platform elements. Included......This PhD thesis has the title Product Platform Modelling. The thesis is about product platforms and visual product platform modelling. Product platforms have gained an increasing attention in industry and academia in the past decade. The reasons are many, yet the increasing globalisation...

  12. From Product Models to Product State Models

    DEFF Research Database (Denmark)

    Larsen, Michael Holm

    1999-01-01

    A well-known technology designed to handle product data is Product Models. Product Models are in their current form not able to handle all types of product state information. Hence, the concept of a Product State Model (PSM) is proposed. The PSM and in particular how to model a PSM is the Research...

  13. Breast cancer screening (BCS) chart: a basic and preliminary model for making screening mammography more productive and efficient.

    Science.gov (United States)

    Poorolajal, Jalal; Akbari, Mohammad Esmaeil; Ziaee, Fatane; Karami, Manoochehr; Ghoncheh, Mahshid

    2017-05-15

    The breast cancer screening (BCS) chart is suggested as a basic and preliminary tool to improve efficiency of screening mammography. We conducted this case-control study in 2016 and enrolled 1422 women aged 30-75 years, including 506 women with breast cancer (cases) and 916 women without breast cancer (controls). We developed the BCS chart using a multiple logistic regression analysis. We combined the risks of breast cancer to predict the individual risk of breast cancer. Then, we stratified and colored the predicted risk probabilities as follows: green), 05-09% (yellow), 10-14% (orange), 15-19% (red), 20-24% (brown) and ≥25% (black). The BCS chart provides the risk probability of breast cancer, based on age, body mass index, late menopause, having a benign breast disease and a positive family history of breast cancer among the first-degree or the second/third-degree relatives. According to this chart, an individual can be classified in a category of low risk (green), medium risk (yellow and orange), high risk (red and brown) and very high risk (black) for breast cancer. This chart is a flexible and easy to use tool that can detect high-risk subjects and make the screening program more efficient and productive. © The Author 2017. Published by Oxford University Press on behalf of Faculty of Public Health. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com

  14. The Efficiency of Educational Production

    DEFF Research Database (Denmark)

    Bogetoft, Peter; Heinesen, Eskil; Tranæs, Torben

    is the most efficient Nordic country (often fully efficient), whereas Sweden and especially Norway and Denmark are clearly inefficient. However, using PISA test scores as indicators of student input quality in upper secondary education reduces the inefficiencies of these three countries. Also, when expected......Focusing in particular on upper secondary education, this paper examines whether the relatively high level of expenditure on education in the Nordic countries is matched by high output from the educational sector, both in terms of student enrolment and indicators of output quality in the form...... of graduation/completion rates and expected earnings after completed education. We use Data Envelopment Analysis (DEA) to compare (benchmark) the Nordic countries with a relevant group of rich OECD countries and calculate input efficiency scores for each country. We estimate a wide range of specifications...

  15. The Efficiency of Educational Production

    DEFF Research Database (Denmark)

    Bogetoft, Peter; Heinesen, Eskil; Tranæs, Torben

    2015-01-01

    is the most efficient Nordic country (often fully efficient), whereas Sweden and especially Norway and Denmark are clearly inefficient. However, using PISA test scores as indicators of student input quality in upper secondary education reduces the inefficiencies of these three countries. Also, when expected......Focusing in particular on upper secondary education, this paper examines whether the relatively high level of expenditure on education in the Nordic countries is matched by high output from the educational sector, both in terms of student enrolment and indicators of output quality in the form...... of graduation/completion rates and expected earnings after completed education. We use data envelopment analysis (DEA) to compare (benchmark) the Nordic countries with a relevant group of rich OECD countries and calculate input efficiency scores for each country. We estimate a wide range of specifications...

  16. Production models

    DEFF Research Database (Denmark)

    Svensson, Carsten

    2002-01-01

    The Project is co-financed with Nilpeter A/S and investigates the industrialization of build to order production. Project content: - Enterprise engineering - Specification processes - Mass Customization/ Build To Order - Knowledge/information management - Configuration - Supply Chain Management...

  17. Global parameterization and validation of a two-leaf light use efficiency model for predicting gross primary production across FLUXNET sites

    DEFF Research Database (Denmark)

    Zhou, Yanlian; Wu, Xiaocui; Ju, Weimin

    2015-01-01

    Light use efficiency (LUE) models are widely used to simulate gross primary production (GPP). However, the treatment of the plant canopy as a big leaf by these models can introduce large uncertainties in simulated GPP. Recently, a two-leaf light use efficiency (TL-LUE) model was developed...... to simulate GPP separately for sunlit and shaded leaves and has been shown to outperform the big-leaf MOD17 model at six FLUX sites in China. In this study we investigated the performance of the TL-LUE model for a wider range of biomes. For this we optimized the parameters and tested the TL-LUE model using...... data from 98 FLUXNET sites which are distributed across the globe. The results showed that the TL-LUE model performed in general better than the MOD17 model in simulating 8 day GPP. Optimized maximum light use efficiency of shaded leaves (epsilon(msh)) was 2.63 to 4.59 times that of sunlit leaves...

  18. Energy production and reactor efficiency

    International Nuclear Information System (INIS)

    Anon.

    1975-01-01

    Doubts have been raised in relation to the economic and energetic efficiency of nuclear reactors. Some economists are questioning whether, when all the capital and material inputs to fission technology are considered, nuclear reactors yield sufficiently large amounts of energy to show a nett gain of energy. (author)

  19. The Efficiency of Educational Production

    DEFF Research Database (Denmark)

    Bogetoft, Peter; Heinesen, Eskil; Tranæs, Torben

    the educational sector, both in terms of a large number of students enrolled in educational programmes and a high completion rate. The methodology used is to compare (benchmark) Denmark with a relevant group of countries and to calculate how much cheaper Denmark could teach the same number of students...... to explain the higher costs of upper secondary education. On the output side, if earnings and levels of employment among those who complete their education are taken into account, then Denmark is in fact found to be efficient. However, this high level of efficiency has become less clear-cut in recent years......Denmark, Norway, New Zealand, Canada and the USA are the OECD countries that spend most on education, measured in relation to GDP. Focusing in particular on upper secondary education, this paper examines whether the heavy expenditure on education in Denmark is matched by high output from...

  20. Eco-efficiency in industrial production

    NARCIS (Netherlands)

    von Raesfeld Meijer, Ariane M.; de Bakker, F.G.A.; Groen, Arend J.

    2001-01-01

    English AbstractThis report of the MATRIC project investigated 'Eco-efficiency in industrial production'. After a general introduction into the domain of eco-efficiency, the first part of this report further focusses on the organisation of Product-Oriented Environmental Management (POEM), which is

  1. Chemistry - Toward efficient hydrogen production at surfaces

    DEFF Research Database (Denmark)

    Nørskov, Jens Kehlet; Christensen, Claus H.

    2006-01-01

    Calculations are providing a molecular picture of hydrogen production on catalytic surfaces and within enzymes, knowledge that may guide the design of new, more efficient catalysts for the hydrogen economy.......Calculations are providing a molecular picture of hydrogen production on catalytic surfaces and within enzymes, knowledge that may guide the design of new, more efficient catalysts for the hydrogen economy....

  2. Improving efficiency in pig production

    African Journals Online (AJOL)

    by adopting different strategies for meat production ... lates to some specific nutritional considerations. ... allowances were made for the correlated effects of any change. ... end of her reproductive life the sow is also usually sold for meat ... the experimental work. ... on pigs of up-to-date genotype fed on modern balanced diets.

  3. Global parameterization and validation of a two-leaf light use efficiency model for predicting gross primary production across FLUXNET sites: TL-LUE Parameterization and Validation

    Energy Technology Data Exchange (ETDEWEB)

    Zhou, Yanlian [Jiangsu Provincial Key Laboratory of Geographic Information Science and Technology, School of Geographic and Oceanographic Sciences, Nanjing University, Nanjing China; Joint Center for Global Change Studies, Beijing China; Wu, Xiaocui [International Institute for Earth System Sciences, Nanjing University, Nanjing China; Joint Center for Global Change Studies, Beijing China; Ju, Weimin [International Institute for Earth System Sciences, Nanjing University, Nanjing China; Jiangsu Center for Collaborative Innovation in Geographic Information Resource Development and Application, Nanjing China; Chen, Jing M. [International Institute for Earth System Sciences, Nanjing University, Nanjing China; Joint Center for Global Change Studies, Beijing China; Wang, Shaoqiang [Key Laboratory of Ecosystem Network Observation and Modeling, Institute of Geographic Sciences and Natural Resources Research, Chinese Academy of Science, Beijing China; Wang, Huimin [Key Laboratory of Ecosystem Network Observation and Modeling, Institute of Geographic Sciences and Natural Resources Research, Chinese Academy of Science, Beijing China; Yuan, Wenping [State Key Laboratory of Earth Surface Processes and Resource Ecology, Future Earth Research Institute, Beijing Normal University, Beijing China; Andrew Black, T. [Faculty of Land and Food Systems, University of British Columbia, Vancouver British Columbia Canada; Jassal, Rachhpal [Faculty of Land and Food Systems, University of British Columbia, Vancouver British Columbia Canada; Ibrom, Andreas [Department of Environmental Engineering, Technical University of Denmark (DTU), Kgs. Lyngby Denmark; Han, Shijie [Institute of Applied Ecology, Chinese Academy of Sciences, Shenyang China; Yan, Junhua [South China Botanical Garden, Chinese Academy of Sciences, Guangzhou China; Margolis, Hank [Centre for Forest Studies, Faculty of Forestry, Geography and Geomatics, Laval University, Quebec City Quebec Canada; Roupsard, Olivier [CIRAD-Persyst, UMR Ecologie Fonctionnelle and Biogéochimie des Sols et Agroécosystèmes, SupAgro-CIRAD-INRA-IRD, Montpellier France; CATIE (Tropical Agricultural Centre for Research and Higher Education), Turrialba Costa Rica; Li, Yingnian [Northwest Institute of Plateau Biology, Chinese Academy of Sciences, Xining China; Zhao, Fenghua [Key Laboratory of Ecosystem Network Observation and Modeling, Institute of Geographic Sciences and Natural Resources Research, Chinese Academy of Science, Beijing China; Kiely, Gerard [Environmental Research Institute, Civil and Environmental Engineering Department, University College Cork, Cork Ireland; Starr, Gregory [Department of Biological Sciences, University of Alabama, Tuscaloosa Alabama USA; Pavelka, Marian [Laboratory of Plants Ecological Physiology, Institute of Systems Biology and Ecology AS CR, Prague Czech Republic; Montagnani, Leonardo [Forest Services, Autonomous Province of Bolzano, Bolzano Italy; Faculty of Sciences and Technology, Free University of Bolzano, Bolzano Italy; Wohlfahrt, Georg [Institute for Ecology, University of Innsbruck, Innsbruck Austria; European Academy of Bolzano, Bolzano Italy; D' Odorico, Petra [Grassland Sciences Group, Institute of Agricultural Sciences, ETH Zurich Switzerland; Cook, David [Atmospheric and Climate Research Program, Environmental Science Division, Argonne National Laboratory, Argonne Illinois USA; Arain, M. Altaf [McMaster Centre for Climate Change and School of Geography and Earth Sciences, McMaster University, Hamilton Ontario Canada; Bonal, Damien [INRA Nancy, UMR EEF, Champenoux France; Beringer, Jason [School of Earth and Environment, The University of Western Australia, Crawley Australia; Blanken, Peter D. [Department of Geography, University of Colorado Boulder, Boulder Colorado USA; Loubet, Benjamin [UMR ECOSYS, INRA, AgroParisTech, Université Paris-Saclay, Thiverval-Grignon France; Leclerc, Monique Y. [Department of Crop and Soil Sciences, College of Agricultural and Environmental Sciences, University of Georgia, Athens Georgia USA; Matteucci, Giorgio [Viea San Camillo Ed LellisViterbo, University of Tuscia, Viterbo Italy; Nagy, Zoltan [MTA-SZIE Plant Ecology Research Group, Szent Istvan University, Godollo Hungary; Olejnik, Janusz [Meteorology Department, Poznan University of Life Sciences, Poznan Poland; Department of Matter and Energy Fluxes, Global Change Research Center, Brno Czech Republic; Paw U, Kyaw Tha [Department of Land, Air and Water Resources, University of California, Davis California USA; Joint Program on the Science and Policy of Global Change, Massachusetts Institute of Technology, Cambridge USA; Varlagin, Andrej [A.N. Severtsov Institute of Ecology and Evolution, Russian Academy of Sciences, Moscow Russia

    2016-04-06

    Light use efficiency (LUE) models are widely used to simulate gross primary production (GPP). However, the treatment of the plant canopy as a big leaf by these models can introduce large uncertainties in simulated GPP. Recently, a two-leaf light use efficiency (TL-LUE) model was developed to simulate GPP separately for sunlit and shaded leaves and has been shown to outperform the big-leaf MOD17 model at 6 FLUX sites in China. In this study we investigated the performance of the TL-LUE model for a wider range of biomes. For this we optimized the parameters and tested the TL-LUE model using data from 98 FLUXNET sites which are distributed across the globe. The results showed that the TL-LUE model performed in general better than the MOD17 model in simulating 8-day GPP. Optimized maximum light use efficiency of shaded leaves (εmsh) was 2.63 to 4.59 times that of sunlit leaves (εmsu). Generally, the relationships of εmsh and εmsu with εmax were well described by linear equations, indicating the existence of general patterns across biomes. GPP simulated by the TL-LUE model was much less sensitive to biases in the photosynthetically active radiation (PAR) input than the MOD17 model. The results of this study suggest that the proposed TL-LUE model has the potential for simulating regional and global GPP of terrestrial ecosystems and it is more robust with regard to usual biases in input data than existing approaches which neglect the bi-modal within-canopy distribution of PAR.

  4. Ownership and efficiency in nuclear power production

    International Nuclear Information System (INIS)

    Pollitt, M.G.

    1995-01-01

    This paper aims to contribute to the relatively small amount of academic literature on the efficiency of nuclear power production. The author draws on world-wide comparisons to illustrate the situation in the United Kingdom, where the nuclear generating capacity, conceived of and constructed as a public concern, has recently been privatised. The theory and evidence for links between ownership and productive efficiency is received. Efficiency measures used are explained as are the linear programs required to generate them. Data Envelopment Analysis (DEA) is used to analyse productive efficiency of nuclear power plants before and after privatisation. Results of the DEA are used to test the hypothesis that ownership has no effect on productive efficiency. (UK)

  5. Cue Effectiveness in Communicatively Efficient Discourse Production

    Science.gov (United States)

    Qian, Ting; Jaeger, T. Florian

    2012-01-01

    Recent years have seen a surge in accounts motivated by information theory that consider language production to be partially driven by a preference for communicative efficiency. Evidence from discourse production (i.e., production beyond the sentence level) has been argued to suggest that speakers distribute information across discourse so as to…

  6. Estimating Diurnal Courses of Gross Primary Production for Maize: A Comparison of Sun-Induced Chlorophyll Fluorescence, Light-Use Efficiency and Process-Based Models

    Directory of Open Access Journals (Sweden)

    Tianxiang Cui

    2017-12-01

    Full Text Available Accurately quantifying gross primary production (GPP is of vital importance to understanding the global carbon cycle. Light-use efficiency (LUE models and process-based models have been widely used to estimate GPP at different spatial and temporal scales. However, large uncertainties remain in quantifying GPP, especially for croplands. Recently, remote measurements of solar-induced chlorophyll fluorescence (SIF have provided a new perspective to assess actual levels of plant photosynthesis. In the presented study, we evaluated the performance of three approaches, including the LUE-based multi-source data synergized quantitative (MuSyQ GPP algorithm, the process-based boreal ecosystem productivity simulator (BEPS model, and the SIF-based statistical model, in estimating the diurnal courses of GPP at a maize site in Zhangye, China. A field campaign was conducted to acquire synchronous far-red SIF (SIF760 observations and flux tower-based GPP measurements. Our results showed that both SIF760 and GPP were linearly correlated with APAR, and the SIF760-GPP relationship was adequately characterized using a linear function. The evaluation of the modeled GPP against the GPP measured from the tower demonstrated that all three approaches provided reasonable estimates, with R2 values of 0.702, 0.867, and 0.667 and RMSE values of 0.247, 0.153, and 0.236 mg m−2 s−1 for the MuSyQ-GPP, BEPS and SIF models, respectively. This study indicated that the BEPS model simulated the GPP best due to its efficiency in describing the underlying physiological processes of sunlit and shaded leaves. The MuSyQ-GPP model was limited by its simplification of some critical ecological processes and its weakness in characterizing the contribution of shaded leaves. The SIF760-based model demonstrated a relatively limited accuracy but showed its potential in modeling GPP without dependency on climate inputs in short-term studies.

  7. Scaling gross ecosystem production at Harvard Forest with remote sensing: a comparison of estimates from a constrained quantum-use efficiency model and eddy correlation

    International Nuclear Information System (INIS)

    Waring, R.H.; Law, B.E.; Goulden, M.L.; Bassow, S.L.; McCreight, R.W.; Wofsy, S.C.; Bazzaz, F.A.

    1995-01-01

    Two independent methods of estimating gross ecosystem production (GEP) were compared over a period of 2 years at monthly integrals for a mixed forest of conifers and deciduous hardwoods at Harvard Forest in central Massachusetts. Continuous eddy flux measurements of net ecosystem exchange (NEE) provided one estimate of GEP by taking day to night temperature differences into account to estimate autotrophic and heterotrophic respiration. GEP was also estimated with a quantum efficiency model based on measurements of maximum quantum efficiency (Qmax), seasonal variation in canopy phenology and chlorophyll content, incident PAR, and the constraints of freezing temperatures and vapour pressure deficits on stomatal conductance. Quantum efficiency model estimates of GEP and those derived from eddy flux measurements compared well at monthly integrals over two consecutive years (R 2 = 0–98). Remotely sensed data were acquired seasonally with an ultralight aircraft to provide a means of scaling the leaf area and leaf pigmentation changes that affected the light absorption of photosynthetically active radiation to larger areas. A linear correlation between chlorophyll concentrations in the upper canopy leaves of four hardwood species and their quantum efficiencies (R 2 = 0–99) suggested that seasonal changes in quantum efficiency for the entire canopy can be quantified with remotely sensed indices of chlorophyll. Analysis of video data collected from the ultralight aircraft indicated that the fraction of conifer cover varied from < 7% near the instrument tower to about 25% for a larger sized area. At 25% conifer cover, the quantum efficiency model predicted an increase in the estimate of annual GEP of < 5% because unfavourable environmental conditions limited conifer photosynthesis in much of the non-growing season when hardwoods lacked leaves

  8. A methodology for model-based planning and evaluation of energy efficiency in production; Eine Methodik zur modellbasierten Planung und Bewertung der Energieeffizienz in der Produktion

    Energy Technology Data Exchange (ETDEWEB)

    Haag, Holger

    2013-08-01

    As global demand is rising constantly, the sustainable use of natural resources is a central challenge for the next years. This high demand leads to shortages and thus to rising costs of energy purchase. Manufacturing companies are facing global competition and improving their ressource efficiency can lead to both economic and ecologic benefits. But to increase the energy efficiency in production, interrelationships within the shop floor must be understood and suitable control variables have to be identified and applied. The methodology developed in this thesis addresses these aspects and merges them to a model-based approach for the planning, evaluation and optimization of the energy consumption in factories. The basic methodology focuses on a state based modeling approach. This allows linking the states to the specific energy profiles. Therefore not only the resources of the main processes but also the peripheral systems have to be considered. The integration of process planning makes it possible to examine and evaluate different constellations of parameters during the planning phase already. This is important as the main aspects of the energetic behavior of a production are determined in this phase. Thus, the work planner is given the opportunity to get feedback concerning the energy efficiency and the energetic behavior of the planned system. The additional consideration of energetic aspects in the production planning and control allows operating the whole production continuously at the energetically best operating point by initiating suitable measures. This method is implemented using a bidirectional messaging system which is capable to manage a permanent exchange of data between the management system and the resources in the shop floor. A developed key performance indicator (KPI) system forms the basis to evaluate the different parameter sets or possible scenarios. Including the classic objectives of production too, the user of the KPI system not only

  9. Driving clinical study efficiency by using a productivity breakdown model: comparative evaluation of a global clinical study and a similar Japanese study.

    Science.gov (United States)

    Takahashi, K; Sengoku, S; Kimura, H

    2011-02-01

    A fundamental management imperative of pharmaceutical companies is to contain surging costs of developing and launching drugs globally. Clinical studies are a research and development (R&D) cost driver. The objective of this study was to develop a productivity breakdown model, or a key performance indicator (KPI) tree, for an entire clinical study and to use it to compare a global clinical study with a similar Japanese study. We, thereby, hope to identify means of improving study productivity. We developed the new clinical study productivity breakdown model, covering operational aspects and cost factors. Elements for improving clinical study productivity were assessed from a management viewpoint by comparing empirical tracking data from a global clinical study with a Japanese study with similar protocols. The following unique and material differences, beyond simple international difference in cost of living, that could affect the efficiency of future clinical trials were identified: (i) more frequent site visits in the Japanese study, (ii) head counts at the Japanese study sites more than double those of the global study and (iii) a shorter enrollment time window of about a third that of the global study at the Japanese study sites. We identified major differences in the performance of the two studies. These findings demonstrate the potential of the KPI tree for improving clinical study productivity. Trade-offs, such as those between reduction in head count at study sites and expansion of the enrollment time window, must be considered carefully. © 2010 Blackwell Publishing Ltd.

  10. Production of Energy Efficient Preform Structures (PEEPS)

    Energy Technology Data Exchange (ETDEWEB)

    Dr. John A. Baumann

    2012-06-08

    Due to its low density, good structural characteristics, excellent fabrication properties, and attractive appearance, aluminum metal and its alloys continue to be widely utilized. The transportation industry continues to be the largest consumer of aluminum products, with aerospace as the principal driver for this use. Boeing has long been the largest single company consumer of heat-treated aluminum in the U.S. The extensive use of aluminum to build aircraft and launch vehicles has been sustained, despite the growing reliance on more structurally efficient carbon fiber reinforced composite materials. The trend in the aerospace industry over the past several decades has been to rely extensively on large, complex, thin-walled, monolithic machined structural components, which are fabricated from heavy billets and thick plate using high speed machining. The use of these high buy-to-fly ratio starting product forms, while currently cost effective, is energy inefficient, with a high environmental impact. The widespread implementation of Solid State Joining (SSJ) technologies, to produce lower buy-to-fly ratio starting forms, tailored to each specific application, offers the potential for a more sustainable manufacturing strategy, which would consume less energy, require less material, and reduce material and manufacturing costs. One objective of this project was to project the energy benefits of using SSJ techniques to produce high-performance aluminum structures if implemented in the production of the world fleet of commercial aircraft. A further objective was to produce an energy consumption prediction model, capable of calculating the total energy consumption, solid waste burden, acidification potential, and CO2 burden in producing a starting product form - whether by conventional or SSJ processes - and machining that to a final part configuration. The model needed to be capable of computing and comparing, on an individual part/geometry basis, multiple possible

  11. Technical efficiency of irrigated vegetable production among ...

    African Journals Online (AJOL)

    This study was carried out to analyse the technical efficiency of irrigated vegetable production among smallholder farmers in the guinea savannah, Nigeria, and determine the cost and returns on irrigated vegetable production. Two-stage sampling technique was used, purposive selection of two states and three Local ...

  12. RESOURCE USE EFFICIENCY OF GROUNDNUT PRODUCTION IN ...

    African Journals Online (AJOL)

    AGROSEARCH UIL

    2012-09-28

    Sep 28, 2012 ... A stratified sampling technique was employed to select 58 respondents. ... there is still opportunity to increase their production to attain optimal economic efficiency. The ... metric tons and an average productivity of 1.4 metric tons /ha. Developing ... The educated population are gainfully employed in some.

  13. Innovation Production Models

    Directory of Open Access Journals (Sweden)

    Tamam N. Guseinova

    2016-01-01

    Full Text Available The article is dedicated to the study of the models of production of innovations at enterprise and state levels. The shift towards a new technology wave induces a change in systems of division of labour as well as establishment of new forms of cooperation that are reflected both in theory and practice of innovation policy and management. Within the scope of the research question we have studied different generation of innovation process, starting with simple linear models - "technology push" and "market pull" - and ending with a complex integrated model of open innovations. There are two organizational models of innovation production at the enterprise level: start-ups in the early stages of their development and ambidextrous organizations. The former are prone to linear models of innovation process, while the latter create innovation within more sophisticated inclusive processes. Companies that effectuate reciprocal ambidexterity stand out from all the rest, since together with start-ups, research and development centres, elements of innovation infrastructure and other economic agents operating in the same value chain they constitute the core of most advanced forms of national innovation systems, namely Triple Helix and Quadruple Helix systems. National innovation systems - models of innovation production at the state level - evolve into systems with a more profound division of labour that enable "line production" of innovations. These tendencies are closely related to the advent and development of the concept of serial entrepreneurship that transforms entrepreneurship into a new type of profession. International experience proves this concept to be efficient in various parts of the world. Nevertheless, the use of above mentioned models and concepts in national innovation system should be justified by socioeconomic conditions of economic regions, since they determine the efficiency of implementation of certain innovation processes and

  14. INFORMATION-ANALYTICAL MODEL FOR THE SELECTION OF MANAGEMENT METHODS ACCORDING TO THE DEGREE OF THEIR INFLUENCE ON EFFICIENCY OF PRODUCTION ACTIVITY OF CONSTRUCTION ORGANISATIONS

    Directory of Open Access Journals (Sweden)

    Sh. T. Ismailova

    2017-01-01

    Full Text Available Objectives. Relevant problems related to the adoption of unprogrammed solutions in the process of managing the production  activity of a construction enterprise in unstable, a priori  underdetermined economic environments are addressed.The aim of  the study is todevelop tools and methods for assessing the  effectiveness of the current state of construction production and on  this basis to identify the most effective management of a  construction organisation under unstable market conditions.Methods. The methodology of the conducted research is based on the application of the mathematical apparatus of fuzzy sets for the  processing of expert data and the formation on this basis of linguistic functions that determine the analytical relationship between various  indicators of the production activity of the construction organisation.Results. A method is developed for processing expert data using  fuzzy logic, making it possible to form an analytical relationship  between the performance indicators of the production activity of the  construction organisation and the management parameters that  determine its current state. An alternative means for selecting the  most effective management approach, accounting for its influence on the efficiency of the production activity of the construction organisation, is developed.Conclusion. An information-economic model of situational management of the development of a construction organisation is  developed. The proposed tools and methods allow the effective  management of the production activity of the construction  organisation to be organised, and on this basis to increase the  efficiency of production under different economic conditions in the presence of spontaneously arising perturbative factors. The methodical approach to the organisation of management of the  production activity efficiency of the construction organisation allows the effective subsystems of management

  15. Using flowering and heat-loss models for improving greenhouse energy-use efficiency in annual bedding plant production

    Science.gov (United States)

    In temperate climates, annual bedding plants are typically produced in heated greenhouses from late winter through early summer. Temperature, photoperiod, light intensity, and transplant date are commonly manipulated during commercial production so that plants are in flower for predetermined market ...

  16. Business strategies, profitability and efficiency of production

    Directory of Open Access Journals (Sweden)

    S. Alarcón

    2013-02-01

    Full Text Available The strategy choices of market-oriented companies are a topic now under wide investigation in the analysis of business performance antecedents. The purpose of this study is to examine the outcomes of the combination of three different organizational strategies (market orientation, innovativeness and entrepreneurial orientation on business performance indicators. Models using profitability and efficiency indicators are proposed with the specific aim of obtaining a deeper analysis of the relative roles played by each. The empirical work takes place in the agro-food industry in the Ebro Valley, one of Spain’s most competitive regions. The estimates from profitability quantile and truncated regressions of the efficiency scores reveal that market orientation has a positive effect on economic and productivity performance. The impact of pro-active, innovation-seeking, and risk-averse entrepreneurship is nevertheless more debatable, despite some influence of these entrepreneurial styles on observed performance values. This enables conclusions regarding the possibility of combining a market-oriented business culture with innovation and entrepreneurial activity with a view to obtaining business performance gains.

  17. Malmquist Productivity Index on Efficiency Layers

    Directory of Open Access Journals (Sweden)

    F. Rezai balf ∗

    2012-09-01

    Full Text Available Data Envelopment Analysis (DEA, a popular linear programming technique is useful to rate comparatively operational effiency of decision Making Unit (DMU based on the their deterministic inputoutput data. The Malmquist productivity index in DEA, calculable with the distance function, for measurement the productivity change among two variant time period or two variant group in the same time. This index is based on two factor of efficiency change index and a technological change index. In this paper, we operate on the collective Malmquist productivity index, which performs clustering operation DMUs with classification into different levels of efficient frontier, and then we discuss on the relation between Malmquist index on the efficiency layers and their attractiveness and progress

  18. Productivity and production efficiency among small scale irrigated ...

    African Journals Online (AJOL)

    The study examined productivity and production efficiency among small scale irrigated sugarcane farmers in Niger State, Nigeria using a stochastic translog frontier function. Data for the study were obtained using structured questionnaires administered to 100 randomly selected sugarcane farmers from Paiko and Gurara ...

  19. Modeling international trends in energy efficiency

    International Nuclear Information System (INIS)

    Stern, David I.

    2012-01-01

    I use a stochastic production frontier to model energy efficiency trends in 85 countries over a 37-year period. Differences in energy efficiency across countries are modeled as a stochastic function of explanatory variables and I estimate the model using the cross-section of time-averaged data, so that no structure is imposed on technological change over time. Energy efficiency is measured using a new energy distance function approach. The country using the least energy per unit output, given its mix of outputs and inputs, defines the global production frontier. A country's relative energy efficiency is given by its distance from the frontier—the ratio of its actual energy use to the minimum required energy use, ceteris paribus. Energy efficiency is higher in countries with, inter alia, higher total factor productivity, undervalued currencies, and smaller fossil fuel reserves and it converges over time across countries. Globally, technological change was the most important factor counteracting the energy-use and carbon-emissions increasing effects of economic growth.

  20. Modeling of venturi scrubber efficiency

    Science.gov (United States)

    Crowder, Jerry W.; Noll, Kenneth E.; Davis, Wayne T.

    The parameters affecting venturi scrubber performance have been rationally examined and modifications to the current modeling theory have been developed. The modified model has been validated with available experimental data for a range of throat gas velocities, liquid-to-gas ratios and particle diameters and is used to study the effect of some design parameters on collection efficiency. Most striking among the observations is the prediction of a new design parameter termed the minimum contactor length. Also noted is the prediction of little effect on collection efficiency with increasing liquid-to-gas ratio above about 2ℓ m-3. Indeed, for some cases a decrease in collection efficiency is predicted for liquid rates above this value.

  1. Estimation of Mangrove Net Primary Production and Carbon Sequestration service using Light Use Efficiency model in the Sunderban Biosphere region, India

    Science.gov (United States)

    Sannigrahi, Srikanta; Sen, Somnath; Paul, Saikat

    2016-04-01

    Net Primary Production (NPP) of mangrove ecosystem and its capacity to sequester carbon from the atmosphere may be used to quantify the regulatory ecosystem services. Three major group of parameters has been set up as BioClimatic Parameters (BCP): (Photosynthetically Active Radiation (PAR), Absorbed PAR (APAR), Fraction of PAR (FPAR), Photochemical Reflectance Index (PRI), Light Use Efficiency (LUE)), BioPhysical Parameters (BPP) :(Normalize Difference Vegetation Index (NDVI), scaled NDVI, Enhanced Vegetation Index (EVI), scaled EVI, Optimised and Modified Soil Adjusted Vegetation Index (OSAVI, MSAVI), Leaf Area Index (LAI)), and Environmental Limiting Parameters (ELP) (Temperature Stress (TS), Land Surface Water Index (LSWI), Normalize Soil Water Index (NSWI), Water Stress Scalar (WS), Inversed WS (iWS) Land Surface Temperature (LST), scaled LST, Vapor Pressure Deficit (VPD), scaled VPD, and Soil Water Deficit Index (SWDI)). Several LUE models namely Carnegie Ames Stanford Approach (CASA), Eddy Covariance - LUE (EC-LUE), Global Production Efficiency Model (GloPEM), Vegetation Photosynthesis Model (VPM), MOD NPP model, Temperature and Greenness Model (TG), Greenness and Radiation model (GR) and MOD17 was adopted in this study to assess the spatiotemporal nature of carbon fluxes. Above and Below Ground Biomass (AGB & BGB) was calculated using field based estimation of OSAVI and NDVI. Microclimatic zonation has been set up to assess the impact of coastal climate on environmental limiting factors. MODerate Resolution Imaging Spectroradiometer (MODIS) based yearly Gross Primary Production (GPP) and NPP product MOD17 was also tested with LUE based results with standard model validation statistics: Root Mean Square of Error (RMSE), Mean Absolute Error (MEA), Bias, Coefficient of Variation (CV) and Coefficient of Determination (R2). The performance of CASA NPP was tested with the ground based NPP with R2 = 0.89 RMSE = 3.28 P = 0.01. Among the all adopted models, EC

  2. Methionine supplementation in the productive efficiency, carcass ...

    African Journals Online (AJOL)

    The effect of dietary methionine supplementation at varying levels on the productive efficiency, carcass characteristics and economics of growing indigenous turkey was investigated. Four Isocaloric and Isonitrogenous diets were formulated. The diets were supplemented with 0.00%, 0.05%, 0.10%, and 0.15% respectively.

  3. Labour productivity and resource use efficiency amongst ...

    African Journals Online (AJOL)

    The study examined labour productivity and resource efficiency amongst smallholder cocoa farmers in Abia State, Nigeria. A purposive random sampling technique was adopted in selecting 60 cocoa farmers from three agricultural zones in the State. The analytical techniques used involve inferential statistics like means, ...

  4. Production Efficiency Audit on Tea Beverage Agroindustry

    Directory of Open Access Journals (Sweden)

    Hendra Adiyatna, . Marimin

    2001-04-01

    Full Text Available The objective of this work was to investigate and to apply economic efficiency performance measurement methods for tea beverage agroindustry. These measurements were based on twelve technique and economic efficiency criteria, which illustrate the condition of the processes. This illustration was able to explain the material and the energy utilization, variance of the processes and product, handling of the waste and acceptance in the market. The methodology was divided into three steps: (1 defining the technique and the economic criteria, appropriate to the circumstance of the processes, (2 state efficiency the level status, (3 evaluation and structure prioritizing of the processes improvement alternatives. The results of this work indicates that there are seven appropriate criteria. The status of the efficiency is in the medium level. The improvement priorities recommended include optimization of material and energy usage and minimization of breaktime of the critical processes

  5. Efficiency and Import Penetration on the Productivity of Textile Industry and Textile Products

    Directory of Open Access Journals (Sweden)

    Catur Basuki Rakhmawan

    2012-12-01

    Full Text Available Although textile industry and textile products belong to the strategic sub-sector of manufacturing industry in Indonesia, they are facing problems on the availability of energy, old production machines, and the flooding of imported products into the domestic market. This study is aimed to analyze the efficiency and productivity as performance indicators and how the efficiency and import penetration affect the productivity of textile industry and textile products. The methods of data analysis used in this research are divided in two phases. The first phase, the non-metric approach of Data Envelopment Analysis (DEA is applied to measure the efficiency and productivity. Secondly, the fixed effect model of econometric regression approach is used to find out the effects of efficiency and import penetration on the productivity of textile industry and textile products. The result shows that the average level of efficiency of textile industry and textile products during the period of 2004 – 2008 is about 40 percent with a growth rate of average productivity increases 2.4 percent. Whereas, the econometric estimation results indicate that the increase of efficiency will positively and significantly affect the productivity of textile industry and textile products. On the other hand, the increase of import penetration will negatively affect the productivity of this industry.

  6. Efficiency and Import Penetrationon the Productivity of Textile Industry and Textile Products

    Directory of Open Access Journals (Sweden)

    Catur Basuki Rakhmawan

    2012-12-01

    Full Text Available Although textile industry and textile products belong to the strategic sub-sector of manufacturing industry in Indonesia, they are facing problems on the availability of energy, old production machines, and the flooding of imported products into the domestic market. This study is aimed to analyze the efficiency and productivity as performance indicators and how the efficiency and import penetration affect the productivity of textile industry and textile products. The methods of data analysis used in this research are divided in two phases. The first phase, the non-metric approach of Data Envelopment Analysis (DEA is applied to measure the efficiency and productivity. Secondly, the fixed effect model of econometric regression approach is used to find out the effects of efficiency and import penetration on the productivity of textile industry and textile products. The result shows that the ave-rage level of efficiency of textile industry and textile products during the period of 2004 – 2008 is about 40 percent with a growth rate of average productivity increases 2.4 percent. Whereas, the econometric estimation results indicate that the increase of efficiency will positively and significantly affect the productivity of textile industry and textile products. On the other hand, the increase of import penetration will negatively affect the productivity of this industry.

  7. Efficiency of economic development models

    Directory of Open Access Journals (Sweden)

    Oana Camelia Iacob

    2013-03-01

    Full Text Available The world economy is becoming increasingly integrated. Integrating emerging economies of Asia, such as China and India increase competition on the world stage, putting pressure on the "actors" already existing. These developments have raised questions about the effectiveness of European development model, which focuses on a high level of equity, insurance and social protection. According to analysts, the world today faces three models of economic development with significant weight in the world: the European, American and Asian. This study will focus on analyzing European development model, and a brief comparison with the United States. In addition, this study aims to highlight the relationship between efficiency and social equity that occurs in each submodel in part of the European model, given that social and economic performance in the EU are not homogeneous. To achieve this, it is necessary to analyze different indicators related to social equity and efficiency respectively, to observe the performance of each submodel individually. The article analyzes data to determine submodel performance according to social equity and economic efficiency.

  8. Productive efficiency in the banking industry

    Directory of Open Access Journals (Sweden)

    Martín Leandro Dutto Giolongo

    2016-07-01

    Full Text Available The goal of this paper is to estimate the productive efficiency of Argentine banks. For this purpose, panel data of the universe of banks under the supervision of the Central Bank of the Republic of Argentina (BCRA has been collected. In order to build the bank´s indicators, we used a database of 66 institutions, with annual information for the period 2009-2013. The sources of information were both the BCRA´s web site (www.bcra.gov.ar, and the Buenos Aires Stock Exchange´s web site (www.bolsar.com. It has been selected an efficiency indicator ranging between 0 and 1, meaning the lowest and highest level of efficiency, respectively. The concept of efficiency used here is a relative one, because it considers a Bank´s performance in relation to the behavior of the best players in the industry, being the latter the base of the industry benchmark or frontier. The results show that the mean efficiency of Argentine banks is 0,8277 in the specific period under consideration. The comparison with the results of other studies relating efficiency and competitive pressure, didn´t allow us to infer that the Argentine banking industry experienced in the period a high level of competition

  9. Empirical Study on Total Factor Productive Energy Efficiency in Beijing-Tianjin-Hebei Region-Analysis based on Malmquist Index and Window Model

    Science.gov (United States)

    Xu, Qiang; Ding, Shuai; An, Jingwen

    2017-12-01

    This paper studies the energy efficiency of Beijing-Tianjin-Hebei region and to finds out the trend of energy efficiency in order to improve the economic development quality of Beijing-Tianjin-Hebei region. Based on Malmquist index and window analysis model, this paper estimates the total factor energy efficiency in Beijing-Tianjin-Hebei region empirically by using panel data in this region from 1991 to 2014, and provides the corresponding political recommendations. The empirical result shows that, the total factor energy efficiency in Beijing-Tianjin-Hebei region increased from 1991 to 2014, mainly relies on advances in energy technology or innovation, and obvious regional differences in energy efficiency to exist. Throughout the window period of 24 years, the regional differences of energy efficiency in Beijing-Tianjin-Hebei region shrank. There has been significant convergent trend in energy efficiency after 2000, mainly depends on the diffusion and spillover of energy technologies.

  10. ECONOMIC EFFICIENCY IN TOMATOES PRODUCTION IN GREENHOUSES

    Directory of Open Access Journals (Sweden)

    A POPESCU

    2003-07-01

    Full Text Available This study aimed to appreciate the evolution of economic efficiency in tomatoes production in greenhouses within a private firm situated next to the capital. The firm owns 4 ha greenhouses and the weight of tomatoes crop in the cultivated area is just 38.75 %. In fact, during the last three years, the tomatoes cultivated surface has been diminished in favour of flowers production which, like tomatoes production is an important income source for any producer. The reduction of the tomatoes cultivated area was compensated by the increase of intensification grade using new high performance hybrids and modern technologies. Thus, the scientific production management has been looking for maintaining the total production at the same level from a year to another by an increased average tomatoes yield by 53.33 % . The continuous increase of farm input price has doubled the cost per surface unit and increased the cost per tomatoes kilogram by 33 %. The increase of tomatoes demand and of market price by 31 % have had a positive influence on the farm incomes which has doubled during the last three years. In the year 2000, the company has obtained USD 41,818 income/ha of which subtracting the related production cost we can easily get USD 4,815 profit/ha. The average profit rate recorded by the firm is 13 % in the period 2000-2002, when the study was made. As a conclusion, tomatoes production in greenhouses is a good deal. To keep a high economic efficiency, under the diminishing of the cultivated area, the producers have to increase average tomatoes production by using high performance technology based on high economic value hybrids.

  11. Evaluation of the efficiency of alternative enzyme production technologies

    DEFF Research Database (Denmark)

    Albæk, Mads Orla

    Enzymes are used in an increasing number of industries. The application of enzymes is extending into the production of lignocellulosic ethanol in processes that economically can compete with fossil fuels. Since lignocellulosic ethanol is based on renewable resources it will have a positive impact...... production of cellulases and hemi-cellulases. The aim of the thesiswas to use modeling tools to identify alternative technologies that have higher energy or raw material efficiency than the current technology. The enzyme production by T. reesei was conducted as an aerobic fed-batch fermentation. The process...... of the uncertainty and sensitivity of the model indicated the biological parameters to be responsible for most of the model uncertainty. A number of alternative fermentation technologies for enzyme production were identified in the open literature. Their mass transfer capabilities and their energy efficiencies were...

  12. Models for efficient integration of solar energy

    DEFF Research Database (Denmark)

    Bacher, Peder

    the available flexibility in the system. In the present thesis methods related to operation of solar energy systems and for optimal energy use in buildings are presented. Two approaches for forecasting of solar power based on numerical weather predictions (NWPs) are presented, they are applied to forecast......Efficient operation of energy systems with substantial amount of renewable energy production is becoming increasingly important. Renewables are dependent on the weather conditions and are therefore by nature volatile and uncontrollable, opposed to traditional energy production based on combustion....... The "smart grid" is a broad term for the technology for addressing the challenge of operating the grid with a large share of renewables. The "smart" part is formed by technologies, which models the properties of the systems and efficiently adapt the load to the volatile energy production, by using...

  13. Efficiency and Productivity of County-level Public Hospitals Based on the Data Envelopment Analysis Model and Malmquist Index in Anhui, China

    Directory of Open Access Journals (Sweden)

    Nian-Nian Li

    2017-01-01

    Conclusions: In 2010–2015, the relative service efficiency of 12 county-level public hospitals in Anhui Province showed a decreasing trend, and the service efficiency of each hospital changed. In the past 6 years, although some hospitals have been effective, the efficiency of the county-level public hospitals in Anhui Province has not improved significantly, and the total factor productivity has not been effectively improved. County-level public hospitals need to combine their own reality to find their own deficiencies.

  14. Energy efficiency improvements in ammonia production--perspectives and uncertainties

    International Nuclear Information System (INIS)

    Rafiqul, Islam; Weber, Christoph; Lehmann, Bianca; Voss, Alfred

    2005-01-01

    The paper discusses the energy consumption and energy saving potential for a major energy-intensive product in the chemical industry-ammonia, based on technologies currently in use and possible process improvements. The paper consists of four parts. In the first part, mainly references to various ammonia production technologies are given. Energy consumption, emissions and saving potentials are discussed in the second part. Thereby, the situation in Europe, the US and India is highlighted and various data sources are compared. In the third part of the paper, a novel approach for modeling energy efficiency improvements is described that accounts for uncertainties and unobserved heterogeneity in the production processes. Besides new investments, revamping investments are also included in the modeling and the development of the production stock is accounted for. Finally, in the fourth part, this approach is applied to the modeling of energy efficiency improvements and CO 2 emission reductions in ammonia production. Thereby, considerable improvements in specific energy use and CO 2 emissions are found in the reference scenario, yet under the assumption of high oil and gas prices, a partial switch to coal based technologies is expected which lowers notably the CO 2 efficiency. Introduction of a CO 2 penalty under a certificate trading or other regime is on contrary found to foster energy efficiency and the use of low carbon technologies

  15. Efficient Provision of Employment Service Outputs: A Production Frontier Analysis.

    Science.gov (United States)

    Cavin, Edward S.; Stafford, Frank P.

    1985-01-01

    This article develops a production frontier model for the Employment Service and assesses the relative efficiency of the 51 State Employment Security Agencies in attaining program outcomes close to that frontier. This approach stands in contrast to such established practices as comparing programs to their own previous performance. (Author/CT)

  16. Efficiency in energy production and consumption

    Science.gov (United States)

    Kellogg, Ryan Mayer

    This dissertation deals with economic efficiency in the energy industry and consists of three parts. The first examines how joint experience between pairs of firms working together in oil and gas drilling improves productivity. Part two asks whether oil producers time their drilling optimally by taking real options effects into consideration. Finally, I investigate the efficiency with which energy is consumed, asking whether extending Daylight Saving Time (DST) reduces electricity use. The chapter "Learning by Drilling: Inter-Firm Learning and Relationship Persistence in the Texas Oilpatch" examines how oil production companies and the drilling rigs they hire improve drilling productivity by learning through joint experience. I find that the joint productivity of a lead firm and its drilling contractor is enhanced significantly as they accumulate experience working together. Moreover, this result is robust to other relationship specificities and standard firm-specific learning-by-doing effects. The second chapter, "Drill Now or Drill Later: The Effect of Expected Volatility on Investment," investigates the extent to which firms' drilling behavior accords with a key prescription of real options theory: irreversible investments such as drilling should be deferred when the expected volatility of the investments' payoffs increases. I combine detailed data on oil drilling with expectations of future oil price volatility that I derive from the NYMEX futures options market. Conditioning on expected price levels, I find that oil production companies significantly reduce the number of wells they drill when expected price volatility is high. I conclude with "Daylight Time and Energy: Evidence from an Australian Experiment," co-authored with Hendrik Wolff. This chapter assesses DST's impact on electricity demand using a quasi-experiment in which parts of Australia extended DST in 2000 to facilitate the Sydney Olympics. We show that the extension did not reduce overall

  17. Business strategies, profitability and efficiency of production

    OpenAIRE

    S. Alarcón; M. Sánchez

    2013-01-01

    The strategy choices of market-oriented companies are a topic now under wide investigation in the analysis of business performance antecedents. The purpose of this study is to examine the outcomes of the combination of three different organizational strategies (market orientation, innovativeness and entrepreneurial orientation) on business performance indicators. Models using profitability and efficiency indicators are proposed with the specific aim of obtaining a deeper analysis of the relat...

  18. Biodiversity influences plant productivity through niche-efficiency.

    Science.gov (United States)

    Liang, Jingjing; Zhou, Mo; Tobin, Patrick C; McGuire, A David; Reich, Peter B

    2015-05-05

    The loss of biodiversity is threatening ecosystem productivity and services worldwide, spurring efforts to quantify its effects on the functioning of natural ecosystems. Previous research has focused on the positive role of biodiversity on resource acquisition (i.e., niche complementarity), but a lack of study on resource utilization efficiency, a link between resource and productivity, has rendered it difficult to quantify the biodiversity-ecosystem functioning relationship. Here we demonstrate that biodiversity loss reduces plant productivity, other things held constant, through theory, empirical evidence, and simulations under gradually relaxed assumptions. We developed a theoretical model named niche-efficiency to integrate niche complementarity and a heretofore-ignored mechanism of diminishing marginal productivity in quantifying the effects of biodiversity loss on plant productivity. Based on niche-efficiency, we created a relative productivity metric and a productivity impact index (PII) to assist in biological conservation and resource management. Relative productivity provides a standardized measure of the influence of biodiversity on individual productivity, and PII is a functionally based taxonomic index to assess individual species' inherent value in maintaining current ecosystem productivity. Empirical evidence from the Alaska boreal forest suggests that every 1% reduction in overall plant diversity could render an average of 0.23% decline in individual tree productivity. Out of the 283 plant species of the region, we found that large woody plants generally have greater PII values than other species. This theoretical model would facilitate the integration of biological conservation in the international campaign against several pressing global issues involving energy use, climate change, and poverty.

  19. Biodiversity influences plant productivity through niche–efficiency

    Science.gov (United States)

    Liang, Jingjing; Zhou, Mo; Tobin, Patrick C.; McGuire, A. David; Reich, Peter B.

    2015-01-01

    The loss of biodiversity is threatening ecosystem productivity and services worldwide, spurring efforts to quantify its effects on the functioning of natural ecosystems. Previous research has focused on the positive role of biodiversity on resource acquisition (i.e., niche complementarity), but a lack of study on resource utilization efficiency, a link between resource and productivity, has rendered it difficult to quantify the biodiversity–ecosystem functioning relationship. Here we demonstrate that biodiversity loss reduces plant productivity, other things held constant, through theory, empirical evidence, and simulations under gradually relaxed assumptions. We developed a theoretical model named niche–efficiency to integrate niche complementarity and a heretofore-ignored mechanism of diminishing marginal productivity in quantifying the effects of biodiversity loss on plant productivity. Based on niche–efficiency, we created a relative productivity metric and a productivity impact index (PII) to assist in biological conservation and resource management. Relative productivity provides a standardized measure of the influence of biodiversity on individual productivity, and PII is a functionally based taxonomic index to assess individual species’ inherent value in maintaining current ecosystem productivity. Empirical evidence from the Alaska boreal forest suggests that every 1% reduction in overall plant diversity could render an average of 0.23% decline in individual tree productivity. Out of the 283 plant species of the region, we found that large woody plants generally have greater PII values than other species. This theoretical model would facilitate the integration of biological conservation in the international campaign against several pressing global issues involving energy use, climate change, and poverty.

  20. Biodiversity influences plant productivity through niche–efficiency

    Science.gov (United States)

    Liang, Jingjing; Zhou, Mo; Tobin, Patrick C.; McGuire, A. David; Reich, Peter B.

    2015-01-01

    The loss of biodiversity is threatening ecosystem productivity and services worldwide, spurring efforts to quantify its effects on the functioning of natural ecosystems. Previous research has focused on the positive role of biodiversity on resource acquisition (i.e., niche complementarity), but a lack of study on resource utilization efficiency, a link between resource and productivity, has rendered it difficult to quantify the biodiversity–ecosystem functioning relationship. Here we demonstrate that biodiversity loss reduces plant productivity, other things held constant, through theory, empirical evidence, and simulations under gradually relaxed assumptions. We developed a theoretical model named niche–efficiency to integrate niche complementarity and a heretofore-ignored mechanism of diminishing marginal productivity in quantifying the effects of biodiversity loss on plant productivity. Based on niche–efficiency, we created a relative productivity metric and a productivity impact index (PII) to assist in biological conservation and resource management. Relative productivity provides a standardized measure of the influence of biodiversity on individual productivity, and PII is a functionally based taxonomic index to assess individual species’ inherent value in maintaining current ecosystem productivity. Empirical evidence from the Alaska boreal forest suggests that every 1% reduction in overall plant diversity could render an average of 0.23% decline in individual tree productivity. Out of the 283 plant species of the region, we found that large woody plants generally have greater PII values than other species. This theoretical model would facilitate the integration of biological conservation in the international campaign against several pressing global issues involving energy use, climate change, and poverty. PMID:25901325

  1. Structural Materials for Efficient Energy Production Systems

    International Nuclear Information System (INIS)

    Gomez Briceno, D.

    2009-01-01

    Increasing the efficiency of electric power production systems implies increasing the operating temperature above those of systems currently in operation. The viability of new systems depends completely on the availability of structural materials that withstand the operating conditions specified in the design: adequate features under mechanical stress at high temperatures and compatibility with the medium. In the case of nuclear systems (fission, fusion), an important requirement is their response to irradiation induced damage. In spite of the significant differences that exist in the design of nuclear power plants, fusion reactors, innovative fission systems, supercritical fossil plants, biomass plants, solar concentration thermal plants, etc., all of them have as a common characteristic the use of resistant materials at high temperatures. The qualification of existing materials for the new and more demanding operating conditions and the development of new materials is one of the challenges faced by the electric power production industry. The science of materials and the understanding of the basic processes that take place in structural materials on exposure to the operating conditions of energy production systems are the tools that are available to obtain safe and economically viable solutions. (Authors) 4 refs.

  2. Intragroup conflicts and efficiency of production group

    Directory of Open Access Journals (Sweden)

    Sidorenkov A.V.

    2017-08-01

    Full Text Available Analysis results of relationships of three levels of the conflict (interpersonal, microgroup and group on two types (the job and subject with indicators of subjectively perceived performance and social effectiveness of small groups and informal subgroups are provided. On selection of 42 work groups (N=334 employees it is established that performance efficiency of group according to the experts has inverse relation from all levels and types of the conflict, and by estimates of members of group — from two types of the microgroup conflict. The same type of effectiveness of informal subgroups on one indicator has inverse relation from the group conflict, and on another — from the interpersonal and microgroup conflict. Social effectiveness of group is connected with the interpersonal and group conflict, and informal subgroups are connected with the interpersonal and microgroup conflict. Levels and types of the conflict cause efficiency of group and subgroup not only separately, but also in a combination with each other. Six regression models, four of which display relationships at the same time of several levels and types of the conflict with performance effectiveness of group, and two — with social effectiveness of subgroup are revealed. Mediated and direct relationships of levels and types of the conflict with efficiency of group and subgroup are established.

  3. Reduction of Carbon Footprint and Energy Efficiency Improvement in Aluminum Production by Use of Novel Wireless Instrumentation Integrated with Mathematical Modeling

    Energy Technology Data Exchange (ETDEWEB)

    James W. Evans

    2012-04-11

    The work addressed the greenhouse gas emission and electrical energy consumption of the aluminum industry. The objective was to provide a means for reducing both through the application of wireless instrumentation, coupled to mathematical modeling. Worldwide the aluminum industry consumes more electrical energy than all activities in many major countries (e.g. the UK) and emits more greenhouse gasses (e.g. than France). Most of these excesses are in the 'primary production' of aluminum; that is the conversion of aluminum oxide to metal in large electrolytic cells operating at hundreds of thousands of amps. An industry-specific GHG emission has been the focus of the work. The electrolytic cells periodically, but at irregular intervals, experience an upset condition known as an 'anode effect'. During such anode effects the cells emit fluorinated hydrocarbons (PFCs, which have a high global warming potential) at a rate far greater than in normal operation. Therefore curbing anode effects will reduce GHG emissions. Prior work had indicated that the distribution of electrical current within the cell experiences significant shifts in the minutes before an anode effect. The thrust of the present work was to develop technology that could detect and report this early warning of an anode effect so that the control computer could minimize GHG emissions. A system was developed to achieve this goal and, in collaboration with Alcoa, was tested on two cells at an Alcoa plant in Malaga, Washington. The project has also pointed to the possibility of additional improvements that could result from the work. Notable among these is an improvement in efficiency that could result in an increase in cell output at little extra operating cost. Prospects for commercialization have emerged in the form of purchase orders for further installations. The work has demonstrated that a system for monitoring the current of individual anodes in an aluminum cell is practical

  4. What factors affect the productivity and efficiency of physician practices?

    Science.gov (United States)

    Sunshine, Jonathan H; Hughes, Danny R; Meghea, Cristian; Bhargavan, Mythreyi

    2010-02-01

    Increasing the productivity and efficiency of physician practices could help relieve the rapid growth of US healthcare costs and the expected physician shortage. Radiology practices are an attractive specific focus for research on practices' productivity and efficiency because they are home to many purportedly productivity-enhancing operational technologies. This affords an opportunity to study the effect of production technology on physicians' output. As well, radiology is a leader in the general movement of physicians out of very small practices. And imaging is by the fastest-growing category of physician expenditure. Using data from 2003 to 2007 surveys of radiologists, we estimate a stochastic frontier model to study the effects of practice characteristics, such as work hours, practice size, and output mix, and technologies used in work production, on practices' productivity and efficiency. At the mean, the elasticities of output with respect to practice size and annual hours worked per full-time physician were 0.73 and 0.51, respectively. Some production technologies increase productivity by 15% to 20%; others generate no increase. Using "nighthawks"--ie, contracting out after-hours work to external firms that consolidate workflow--significantly increases practice efficiency. The general US trend toward larger practice size is unlikely to relieve cost or physician shortage pressures. The actual effect of purportedly productivity-enhancing operational technologies needs to be carefully evaluated before they are widely adopted. As the recently-developed innovations of nighthawks and hospitalists show, practices should give more attention to a possible choice to "buy," rather than "make," part of their output.

  5. Catalysts for Efficient Production of Carbon Nanotubes

    Science.gov (United States)

    Sun, Ted X.; Dong, Yi

    2009-01-01

    Several metal alloys have shown promise as improved catalysts for catalytic thermal decomposition of hydrocarbon gases to produce carbon nanotubes (CNTs). Heretofore almost every experiment on the production of carbon nanotubes by this method has involved the use of iron, nickel, or cobalt as the catalyst. However, the catalytic-conversion efficiencies of these metals have been observed to be limited. The identification of better catalysts is part of a continuing program to develop means of mass production of high-quality carbon nanotubes at costs lower than those achieved thus far (as much as $100/g for purified multi-wall CNTs or $1,000/g for single-wall CNTs in year 2002). The main effort thus far in this program has been the design and implementation of a process tailored specifically for high-throughput screening of alloys for catalyzing the growth of CNTs. The process includes an integral combination of (1) formulation of libraries of catalysts, (2) synthesis of CNTs from decomposition of ethylene on powders of the alloys in a pyrolytic chemical-vapor-decomposition reactor, and (3) scanning- electron-microscope screening of the CNTs thus synthesized to evaluate the catalytic efficiencies of the alloys. Information gained in this process is put into a database and analyzed to identify promising alloy compositions, which are to be subjected to further evaluation in a subsequent round of testing. Some of these alloys have been found to catalyze the formation of carbon nano tubes from ethylene at temperatures as low as 350 to 400 C. In contrast, the temperatures typically required for prior catalysts range from 550 to 750 C.

  6. Product and Process Modelling

    DEFF Research Database (Denmark)

    Cameron, Ian T.; Gani, Rafiqul

    . These approaches are put into the context of life cycle modelling, where multiscale and multiform modelling is increasingly prevalent in the 21st century. The book commences with a discussion of modern product and process modelling theory and practice followed by a series of case studies drawn from a variety......This book covers the area of product and process modelling via a case study approach. It addresses a wide range of modelling applications with emphasis on modelling methodology and the subsequent in-depth analysis of mathematical models to gain insight via structural aspects of the models...... to biotechnology applications, food, polymer and human health application areas. The book highlights to important nature of modern product and process modelling in the decision making processes across the life cycle. As such it provides an important resource for students, researchers and industrial practitioners....

  7. Contracting for Efficiency. A Best Practices Guide for Energy-Efficient Product Procurement

    Energy Technology Data Exchange (ETDEWEB)

    Bunch, Saralyn [Office of Energy Efficiency and Renewable Energy (EERE), Washington, DC (United States); Payne, Christopher [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2016-04-01

    The requirement to buy energy- and water-efficient products applies to federal purchases made through any procurement pathway (e.g., purchase cards, e-retailers, and solicitations) and to a wide variety of federal projects. The Federal Energy Management Program’s (FEMP's) Buy Energy-Efficient Products buyer overview fact sheet and Contracting for Efficiency best practices guide for product procurement are designed to support federal buyers in the purchase of energy- and water-efficient products.

  8. Contracting for Efficiency: A Best Practices Guide for Energy Efficient Product Procurement

    Energy Technology Data Exchange (ETDEWEB)

    Bunch, Saralyn [Office of Energy Efficiency and Renewable Energy (EERE), Washington, DC (United States); Payne, Christopher [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2017-11-01

    The requirement to buy energy- and water-efficient products applies to federal purchases made through any procurement pathway (e.g., purchase cards, e-retailers, and solicitations) and to a wide variety of federal projects. The Federal Energy Management Program’s (FEMP's) Buy Energy-Efficient Products buyer overview fact sheet and Contracting for Efficiency best practices guide for product procurement are designed to support federal buyers in the purchase of energy- and water-efficient products.

  9. Scenario modeling potential eco-efficiency gains from a transition to organic agriculture: life cycle perspectives on Canadian canola, corn, soy, and wheat production.

    Science.gov (United States)

    Pelletier, N; Arsenault, N; Tyedmers, P

    2008-12-01

    We used Life Cycle Assessment to scenario model the potential reductions in cumulative energy demand (both fossil and renewable) and global warming, acidifying, and ozone-depleting emissions associated with a hypothetical national transition from conventional to organic production of four major field crops [canola (Brassica rapa), corn (Zea mays), soy (Glycine max), and wheat (Triticum aestivum)] in Canada. Models of these systems were constructed using a combination of census data, published values, and the requirements for organic production described in the Canadian National Organic Standards in order to be broadly representative of the similarities and differences that characterize these disparate production technologies. Our results indicate that organic crop production would consume, on average, 39% as much energy and generate 77% of the global warming emissions, 17% of the ozone-depleting emissions, and 96% of the acidifying emissions associated with current national production of these crops. These differences were almost exclusively due to the differences in fertilizers used in conventional and organic farming and were most strongly influenced by the higher cumulative energy demand and emissions associated with producing conventional nitrogen fertilizers compared to the green manure production used for biological nitrogen fixation in organic agriculture. Overall, we estimate that a total transition to organic production of these crops in Canada would reduce national energy consumption by 0.8%, global warming emissions by 0.6%, and acidifying emissions by 1.0% but have a negligible influence on reducing ozone-depleting emissions.

  10. Modelling water uptake efficiency of root systems

    Science.gov (United States)

    Leitner, Daniel; Tron, Stefania; Schröder, Natalie; Bodner, Gernot; Javaux, Mathieu; Vanderborght, Jan; Vereecken, Harry; Schnepf, Andrea

    2016-04-01

    Water uptake is crucial for plant productivity. Trait based breeding for more water efficient crops will enable a sustainable agricultural management under specific pedoclimatic conditions, and can increase drought resistance of plants. Mathematical modelling can be used to find suitable root system traits for better water uptake efficiency defined as amount of water taken up per unit of root biomass. This approach requires large simulation times and large number of simulation runs, since we test different root systems under different pedoclimatic conditions. In this work, we model water movement by the 1-dimensional Richards equation with the soil hydraulic properties described according to the van Genuchten model. Climatic conditions serve as the upper boundary condition. The root system grows during the simulation period and water uptake is calculated via a sink term (after Tron et al. 2015). The goal of this work is to compare different free software tools based on different numerical schemes to solve the model. We compare implementations using DUMUX (based on finite volumes), Hydrus 1D (based on finite elements), and a Matlab implementation of Van Dam, J. C., & Feddes 2000 (based on finite differences). We analyse the methods for accuracy, speed and flexibility. Using this model case study, we can clearly show the impact of various root system traits on water uptake efficiency. Furthermore, we can quantify frequent simplifications that are introduced in the modelling step like considering a static root system instead of a growing one, or considering a sink term based on root density instead of considering the full root hydraulic model (Javaux et al. 2008). References Tron, S., Bodner, G., Laio, F., Ridolfi, L., & Leitner, D. (2015). Can diversity in root architecture explain plant water use efficiency? A modeling study. Ecological modelling, 312, 200-210. Van Dam, J. C., & Feddes, R. A. (2000). Numerical simulation of infiltration, evaporation and shallow

  11. Efficiency increase of complex production and transport systems management

    Directory of Open Access Journals (Sweden)

    Kornilov S.

    2017-01-01

    Full Text Available This article deals with the problem of the reduced efficiency of management in complex production - transport systems due to the lack of co-ordination in the operation of industrial enterprises and transport carrying out their maintenance. The existing transport service schedules for auxiliary departments do not take into account possible changes in operating conditions, the probability of malfunctions and the amount of reserves, which leads to an increase in general production costs. To solve this problem, we propose to use the interval regulation of production and transport processes in all departments of the complex production and transport systems. Also, such regulation involves the determination of traffic service priority. This will allow passing on from the regulated control of production and transport processes to the situational one, adapted to specific conditions, and reducing losses from untimely transport servicing, which will lead to a stores reduction and efficiency increase of the enterprise circulating facilities use. Testing the effectiveness of interval regulation was performed on the system and dynamics simulation model of liquid iron transportation in the oxygen converter shop of the metallurgical enterprise. It was established that the use of interval regulation processes in iron production and its transportation will allow decreasing non-productive downtime by 21% and the amount of the liquid iron in anticipation of recasting in the oxygen converter shop – by 33%. Economical effect of reducing the liquid iron downtime during transportation to the oxygen converter shop will be about 30 million rubles per year.

  12. Management of efficiency of agricultural production on the basis of ...

    African Journals Online (AJOL)

    Management of efficiency of agricultural production on the basis of margin approach. ... Journal of Fundamental and Applied Sciences ... and systematized to the management of production costs of agricultural products, the proposed definition ...

  13. Energy security for India: Biofuels, energy efficiency and food productivity

    International Nuclear Information System (INIS)

    Gunatilake, Herath; Roland-Holst, David; Sugiyarto, Guntur

    2014-01-01

    The emergence of biofuel as a renewable energy source offers opportunities for significant climate change mitigation and greater energy independence to many countries. At the same time, biofuel represents the possibility of substitution between energy and food. For developing countries like India, which imports over 75% of its crude oil, fossil fuels pose two risks—global warming pollution and long-term risk that oil prices will undermine real living standards. This paper examines India's options for managing energy price risk in three ways: biofuel development, energy efficiency promotion, and food productivity improvements. Our salient results suggest that biodiesel shows promise as a transport fuel substitute that can be produced in ways that fully utilize marginal agricultural resources and hence promote rural livelihoods. First-generation bioethanol, by contrast, appears to have a limited ability to offset the impacts of oil price hikes. Combining the biodiesel expansion policy with energy efficiency improvements and food productivity increases proved to be a more effective strategy to enhance both energy and food security, help mitigate climate change, and cushion the economy against oil price shocks. - Highlights: • We investigate the role of biofuels in India applying a CGE model. • Biodiesel enhances energy security and improve rural livelihoods. • Sugarcane ethanol does not show positive impact on the economy. • Biodiesel and energy efficiency improvements together provide better results. • Food productivity further enhances biodiesel, and energy efficiency impacts

  14. Scaling production and improving efficiency in DEA: an interactive approach

    Science.gov (United States)

    Rödder, Wilhelm; Kleine, Andreas; Dellnitz, Andreas

    2017-10-01

    DEA models help a DMU to detect its (in-)efficiency and to improve activities, if necessary. Efficiency is only one economic aim for a decision-maker; however, up- or downsizing might be a second one. Improving efficiency is the main topic in DEA; the long-term strategy towards the right production size should attract our attention as well. Not always the management of a DMU primarily focuses on technical efficiency but rather is interested in gaining scale effects. In this paper, a formula for returns to scale (RTS) is developed, and this formula is even applicable for interior points of technology. Particularly, technical and scale inefficient DMUs need sophisticated instruments to improve their situation. Considering RTS as well as efficiency, in this paper, we give an advice for each DMU to find an economically reliable path from its actual situation to better activities and finally to most productive scale size (mpss), perhaps. For realizing this path, we propose an interactive algorithm, thus harmonizing the scientific findings and the interests of the management. Small numerical examples illustrate such paths for selected DMUs; an empirical application in theatre management completes the contribution.

  15. ADDED VALUE AS EFFICIENCY CRITERION FOR INDUSTRIAL PRODUCTION PROCESS

    Directory of Open Access Journals (Sweden)

    L. M. Korotkevich

    2016-01-01

    Full Text Available Literary analysis has shown that the majority of researchers are using classical efficiency criteria for construction of an optimization model for production process: profit maximization; cost minimization; maximization of commercial product output; minimization of back-log for product demand; minimization of total time consumption due to production change. The paper proposes to use an index of added value as an efficiency criterion because it combines economic and social interests of all main interested subjects of the business activity: national government, property owners, employees, investors. The following types of added value have been considered in the paper: joint-stock, market, monetary, economic, notional (gross, net, real. The paper makes suggestion to use an index of real value added as an efficiency criterion. Such approach permits to bring notional added value in comparable variant because added value can be increased not only due to efficiency improvement of enterprise activity but also due to environmental factors – excess in rate of export price increases over rate of import growth. An analysis of methods for calculation of real value added has been made on a country-by-country basis (extrapolation, simple and double deflation. A method of double deflation has been selected on the basis of the executed analysis and it is counted according to the Laspeyires, Paasche, Fischer indices. A conclusion has been made that the used expressions do not take into account fully economic peculiarities of the Republic of Belarus: they are considered as inappropriate in the case when product cost is differentiated according to marketing outlets; they do not take account of difference in rate of several currencies and such approach is reflected in export price of a released product and import price for raw material, supplies and component parts. Taking this into consideration expressions for calculation of real value added have been specified

  16. Changes in production efficiency in China identification and measuring

    CERN Document Server

    Xu, Bing; Watada, Junzo

    2014-01-01

    Evaluating  Production Efficiency in China examines production from engineering and statistics perspectives rather than from economics and mathematics perspectives. The authors present an observable benchmark as the criterion of the production efficiency to replace the unobservable production frontier surface. This book discusses several different computing technologies, controllable variable as a path of identification, changes in production efficiency by decision making on specific operating conditions, and optimal resource allocation. The book provides a channel to tap inside the success stories of China, exploiting the way of changes in production efficiency during China’s development in the past 30 years. This book examines the concepts and realization of production efficiencies across all areas of the economy. Also the book provides the perspective of foreign direct investment (FDI) absorption to identify how Chinese economy changes in production efficiency.

  17. Energy efficiency and econometric analysis of broiler production farms

    International Nuclear Information System (INIS)

    Heidari, M.D.; Omid, M.; Akram, A.

    2011-01-01

    The objective of this study was to determine the energy consumption per 1000 bird for the broiler production in Yazd province, Iran. The data were collected from 44 farms by using a face-to-face questionnaire method during January–February 2010. The collected information was analyzed using descriptive statistics, economic analysis and stochastic frontier production function. The production technology of the farmer was assumed to be specified by the Cobb–Douglas (CD) production function. Total input energy was found to be 186,885.87 MJ (1000 bird) −1 while the output energy was 27,461.21 MJ (1000 bird) −1 . The values of specific energy and energy ratio were calculated at 71.95 MJ kg −1 and 0.15, respectively. The sensitivity of energy inputs was estimated using the marginal physical productivity (MPP) method. The MPP value showed the high impact of human labor and machinery energy inputs on output energy. Returns to scale (RTS) values for broiler were found to be 0.96; thus, there prevailed a decreasing RTS for the estimated model. The net return was found positive, as 1386.53 $ (1000 bird) −1 and the benefit to cost ratio from broiler production was calculated to be 1.38. The study revealed that production of meat was profitable in the studied area. -- Highlights: ► We determined the energy use efficiency (EUE) for the broiler production as 0.15, indicating inefficiency use of energy in these farms. ► Total input and output energies were found to be 186,885.87 MJ (1000 bird) −1 and 27,461.21 MJ (1000 bird) −1 , respectively. ► Cobb–Douglas (CD) frontier production function was found useful in developing econometric model for broiler production. ► The results of budgetary analysis indicate production of meat in broiler farms is profitable in the studied area.

  18. Modelling Retail Floorspace Productivity

    NARCIS (Netherlands)

    A.R. Thurik (Roy); P. Kooiman

    1986-01-01

    textabstractThis research note presents a "switching regime" model to investigate the impact of environmental factors on floorspace productivity of individual retail stores. The model includes independent supply and demand functions, which are incorporated within a sales maximizing framework. Unlike

  19. Energy technologies and energy efficiency in economic modelling

    DEFF Research Database (Denmark)

    Klinge Jacobsen, Henrik

    1998-01-01

    This paper discusses different approaches to incorporating energy technologies and technological development in energy-economic models. Technological development is a very important issue in long-term energy demand projections and in environmental analyses. Different assumptions on technological ...... of renewable energy and especially wind power will increase the rate of efficiency improvement. A technologically based model in this case indirectly makes the energy efficiency endogenous in the aggregate energy-economy model....... technological development. This paper examines the effect on aggregate energy efficiency of using technological models to describe a number of specific technologies and of incorporating these models in an economic model. Different effects from the technology representation are illustrated. Vintage effects...... illustrates the dependence of average efficiencies and productivity on capacity utilisation rates. In the long run regulation induced by environmental policies are also very important for the improvement of aggregate energy efficiency in the energy supply sector. A Danish policy to increase the share...

  20. Material efficiency: providing material services with less material production.

    Science.gov (United States)

    Allwood, Julian M; Ashby, Michael F; Gutowski, Timothy G; Worrell, Ernst

    2013-03-13

    Material efficiency, as discussed in this Meeting Issue, entails the pursuit of the technical strategies, business models, consumer preferences and policy instruments that would lead to a substantial reduction in the production of high-volume energy-intensive materials required to deliver human well-being. This paper, which introduces a Discussion Meeting Issue on the topic of material efficiency, aims to give an overview of current thinking on the topic, spanning environmental, engineering, economics, sociology and policy issues. The motivations for material efficiency include reducing energy demand, reducing the emissions and other environmental impacts of industry, and increasing national resource security. There are many technical strategies that might bring it about, and these could mainly be implemented today if preferred by customers or producers. However, current economic structures favour the substitution of material for labour, and consumer preferences for material consumption appear to continue even beyond the point at which increased consumption provides any increase in well-being. Therefore, policy will be required to stimulate material efficiency. A theoretically ideal policy measure, such as a carbon price, would internalize the externality of emissions associated with material production, and thus motivate change directly. However, implementation of such a measure has proved elusive, and instead the adjustment of existing government purchasing policies or existing regulations-- for instance to do with building design, planning or vehicle standards--is likely to have a more immediate effect.

  1. A procedure for Building Product Models

    DEFF Research Database (Denmark)

    Hvam, Lars

    1999-01-01

    , easily adaptable concepts and methods from data modeling (object oriented analysis) and domain modeling (product modeling). The concepts are general and can be used for modeling all types of specifications in the different phases in the product life cycle. The modeling techniques presented have been......The application of product modeling in manufacturing companies raises the important question of how to model product knowledge in a comprehensible and efficient way. An important challenge is to qualify engineers to model and specify IT-systems (product models) to support their specification...... activities. A basic assumption is that engineers have to take the responsability for building product models to be used in their domain. To do that they must be able to carry out the modeling task on their own without any need for support from computer science experts. This paper presents a set of simple...

  2. From Policy to Compliance: Federal Energy Efficient Product Procurement

    Energy Technology Data Exchange (ETDEWEB)

    DeMates, Laurèn [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Scodel, Anna [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2017-09-06

    Federal buyers are required to purchase energy-efficient products in an effort to minimize energy use in the federal sector, save the federal government money, and spur market development of efficient products. The Federal Energy Management Program (FEMP)’s Energy Efficient Product Procurement (EEPP) Program helps federal agencies comply with the requirement to purchase energy-efficient products by providing technical assistance and guidance and setting efficiency requirements for certain product categories. Past studies have estimated the savings potential of purchasing energy-efficient products at over $500 million per year in energy costs across federal agencies.1 Despite the strong policy support for EEPP and resources available, energy-efficient product purchasing operates within complex decision-making processes and operational structures; implementation challenges exist that may hinder agencies’ ability to comply with purchasing requirements. The shift to purchasing green products, including energy-efficient products, relies on “buy in” from a variety of potential actors throughout different purchasing pathways. Challenges may be especially high for EEPP relative to other sustainable acquisition programs given that efficient products frequently have a higher first cost than non-efficient ones, which may be perceived as a conflict with fiscal responsibility, or more simply problematic for agency personnel trying to stretch limited budgets. Federal buyers may also face challenges in determining whether a given product is subject to EEPP requirements. Previous analysis on agency compliance with EEPP, conducted by the Alliance to Save Energy (ASE), shows that federal agencies are getting better at purchasing energy-efficient products. ASE conducted two reviews of relevant solicitations for product and service contracts listed on Federal Business Opportunities (FBO), the centralized website where federal agencies are required to post procurements greater

  3. Efficient Product Customization by Structure Synthesis

    OpenAIRE

    Maurer, M.;Rupp, T.;Lindemann, U.

    2017-01-01

    The presented approach describes a new strategy for creating product structures, which are suitable for further customer driven product customization – i.e. the customization can be carried out within less time and for lower costs. The required input data is knowledge on the interconnectivity between product components and knowledge of principal scopes of customization demands (e.g. which components or functions customers would like to individualize, which ones are unknown or hidden). By mean...

  4. Photobiological hydrogen production : photochemical efficiency and bioreactor design

    NARCIS (Netherlands)

    Akkerman, I.; Janssen, M.; Rocha, J.; Wijffels, R.H.

    2002-01-01

    Biological production of hydrogen can be carried out by photoautotrophic or photoheterotrophic organisms. Here, the photosystems of both processes are described. The main drawback of the photoautotrophic hydrogen production process is oxygen inhibition. The few efficiencies reported on the

  5. Engineering microbes for efficient production of chemicals

    Science.gov (United States)

    Gong, Wei; Dole, Sudhanshu; Grabar, Tammy; Collard, Andrew Christopher; Pero, Janice G; Yocum, R Rogers

    2015-04-28

    This present invention relates to production of chemicals from microorganisms that have been genetically engineered and metabolically evolved. Improvements in chemical production have been established, and particular mutations that lead to those improvements have been identified. Specific examples are given in the identification of mutations that occurred during the metabolic evolution of a bacterial strain genetically engineered to produce succinic acid. This present invention also provides a method for evaluating the industrial applicability of mutations that were selected during the metabolic evolution for increased succinic acid production. This present invention further provides microorganisms engineered to have mutations that are selected during metabolic evolution and contribute to improved production of succinic acid, other organic acids and other chemicals of commercial interest.

  6. Surfactant assisted disperser pretreatment on the liquefaction of Ulva reticulata and evaluation of biodegradability for energy efficient biofuel production through nonlinear regression modelling.

    Science.gov (United States)

    Kumar, M Dinesh; Tamilarasan, K; Kaliappan, S; Banu, J Rajesh; Rajkumar, M; Kim, Sang Hyoun

    2018-05-01

    The present study aimed to increase the disintegration potential of marine macroalgae, (Ulva reticulata) through chemo mechanical pretreatment (CMP) in an energy efficient manner. By combining surfactant with disperser, the specific energy input was considerably reduced from 437.1 kJ/kg TS to 264.9 kJ/kg TS to achieve 10.7% liquefaction. A disperser rpm (10,000), pretreatment time (30 min) and tween 80 dosage (21.6 mg/L) were considered as an optimum for effective liquefaction of algal biomass. CMP was designated as an appropriate pretreatment resulting in a higher soluble organic release 1250 mg/L, respectively. Anaerobic fermentation results revealed that the volatile fatty acid (VFA) concentration was doubled (782 mg/L) in CMP when compared to mechanical pretreatment (MP) (345 mg/L). CMP pretreated algal biomass was considered as the suitable for biohydrogen production with highest H 2 yield of about 63 mL H 2 /g COD than (MP) (45 mL H 2 /g COD) and control (10 mL H 2 /g COD). Copyright © 2018 Elsevier Ltd. All rights reserved.

  7. Efficiency in the Worst Production Situation Using Data Envelopment Analysis

    Directory of Open Access Journals (Sweden)

    Md. Kamrul Hossain

    2013-01-01

    Full Text Available Data envelopment analysis (DEA measures relative efficiency among the decision making units (DMU without considering noise in data. The least efficient DMU indicates that it is in the worst situation. In this paper, we measure efficiency of individual DMU whenever it losses the maximum output, and the efficiency of other DMUs is measured in the observed situation. This efficiency is the minimum efficiency of a DMU. The concept of stochastic data envelopment analysis (SDEA is a DEA method which considers the noise in data which is proposed in this study. Using bounded Pareto distribution, we estimate the DEA efficiency from efficiency interval. Small value of shape parameter can estimate the efficiency more accurately using the Pareto distribution. Rank correlations were estimated between observed efficiencies and minimum efficiency as well as between observed and estimated efficiency. The correlations are indicating the effectiveness of this SDEA model.

  8. Estimating Production Technical Efficiency of Irvingia Seed (Ogbono ...

    African Journals Online (AJOL)

    This study estimated the production technical efficiency of irvingia seed (Ogbono) farmers in Nsukka agricultural zone in Enugu State, Nigeria. This is against the backdrop of the importance of efficiency as a factor of productivity in a growing economy like Nigeria where resources are scarce and opportunities for new ...

  9. Maximizing Light Utilization Efficiency and Hydrogen Production in Microalgal Cultures

    Energy Technology Data Exchange (ETDEWEB)

    Melis, Anastasios [Univ. of California, Berkeley, CA (United States)

    2014-12-31

    The project addressed the following technical barrier from the Biological Hydrogen Production section of the Fuel Cell Technologies Program Multi-Year Research, Development and Demonstration Plan: Low Sunlight Utilization Efficiency in Photobiological Hydrogen Production is due to a Large Photosystem Chlorophyll Antenna Size in Photosynthetic Microorganisms (Barrier AN: Light Utilization Efficiency).

  10. Multidirectional analysis of technical efficiency for pig production systems

    DEFF Research Database (Denmark)

    Labajavo, Katarina; Hansson, Helena; Asmild, Mette

    2016-01-01

    Declining profitability and ongoing structural changes in the pig sector require thorough efficiency analysis of individual production factors. In this study we calculated technical efficiency indices for each input and output using multidirectional efficiency analysis and examined the relationship...... between ‘farm-specific characteristics’ and input and output technical efficiencies by production type (piglet, growing-finishing, finish-to-farrow). The results indicated that advisory services and farm location were not significantly correlated with technical efficiency. Similar results were obtained...... for ‘housing practices’, with the exception of the latest technology such as heated floors in relation to input labour technical efficiency for growing-finishing and finish-to-farrow productions. Use of written instructions for feeding for growing-finishing and finish-to-farrow production and written...

  11. Multidimensional Balanced Efficiency Decision Model

    Directory of Open Access Journals (Sweden)

    Antonella Petrillo

    2015-10-01

    Full Text Available In this paper a multicriteria methodological approach, based on Balanced Scorecard (BSC and Analytic Network Process (ANP, is proposed to evaluate competitiveness performance in luxury sector. A set of specific key performance indicators (KPIs have been proposed. The contribution of our paper is to present the integration of two methodologies, BSC – a multiple perspective framework for performance assessment – and ANP – a decision-making tool to prioritize multiple performance perspectives and indicators and to generate a unified metric that incorporates diversified issues for conducting supply chain improvements. The BSC/ANP model is used to prioritize all performances within a luxury industry. A real case study is presented.

  12. ECONOMIES OF SCALE AND PRODUCTION EFFICIENCY IN ...

    African Journals Online (AJOL)

    Admin

    high rate of population growth of 2.83% (FOS, 1996). The apparent disparity between the rate of food production and demand for food in Nigeria has led to: (i) a food demand-supply gap thus leading to a widening gap between domestic food supply and the total food requirement; (ii) an increased food importation and (iii).

  13. Primary Radiation Damage in Materials. Review of Current Understanding and Proposed New Standard Displacement Damage Model to Incorporate in Cascade Defect Production Efficiency and Mixing Effects

    International Nuclear Information System (INIS)

    Nordlund, Kai; Sand, Andrea E.; Granberg, Fredric; Zinkle, Steven J.; Stoller, Roger; Averback, Robert S.; Suzudo, Tomoaki; Malerba, Lorenzo; Banhart, Florian; Weber, William J.; Willaime, Francois; Dudarev, Sergei; Simeone, David

    2015-01-01

    Under the auspices of the NEA Nuclear Science Committee (NSC), the Working Party on Multi-scale Modelling of Fuels and Structural Materials for Nuclear Systems (WPMM) was established in 2008 to assess the scientific and engineering aspects of fuels and structural materials, aiming at evaluating multi-scale models and simulations as validated predictive tools for the design of nuclear systems, fuel fabrication and performance. The WPMM's objective is to promote the exchange of information on models and simulations of nuclear materials, theoretical and computational methods, experimental validation, and related topics. It also provides member countries with up-to-date information, shared data, models and expertise. The WPMM Expert Group on Primary Radiation Damage (PRD) was established in 2009 to determine the limitations of the NRT-dpa standard, in the light of both atomistic simulations and known experimental discrepancies, to revisit the NRT-dpa standard and to examine the possibility of proposing a new improved standard of primary damage characteristics. This report reviews the current understanding of primary radiation damage from neutrons, ions and electrons (excluding photons, atomic clusters and more exotic particles), with emphasis on the range of validity of the 'displacement per atom' (dpa) concept in all major classes of materials with the exception of organics. The report also introduces an 'athermal recombination-corrected dpa' (arc-dpa) relation that uses a relatively simple functional to address the well-known issue that 'displacement per atom' (dpa) overestimates damage production in metals under energetic displacement cascade conditions, as well as a 'replacements-per-atom' (rpa) equation, also using a relatively simple functional, that accounts for the fact that dpa is understood to severely underestimate actual atom relocation (ion beam mixing) in metals. (authors)

  14. Efficient uranous nitrate production using membrane electrolysis

    International Nuclear Information System (INIS)

    Zhongwei Yuan; Taihong Yan; Weifang Zheng; Hongying Shuang; Liang Xian; Xiaoyan Bian; Chen Zuo; Chuanbo Li; Zhi Cao

    2013-01-01

    Electrochemical reduction of uranyl nitrate is a green, simple way to make uranous ion. In order to improve the ratio of uranous ion to the total uranium and maintain high current efficiency, an electrolyser with very thin cathodic and anodic compartment, which were separated by a cation exchange membrane, was setup, and its performance was tested. The effects of various parameters on the reduction were also evaluated. The results show that the apparatus is quite positive. It runs well with 120 mA/cm 2 current density (72 cm 2 cathode, constant current batch operation). U(IV) yield can achieve 93.1 % (500 mL feed, total uranium 199 g/L) after 180 min electrolysis. It was also shown that when U(IV) yield was below 80 %, very high current efficiency was maintained, and there was almost a linear relationship between uranous ion yield and electrolysis time; under the range of experimental conditions, the concentration of uranyl nitrate, hydrazine, and nitric acid had little effect on the reduction. (author)

  15. Determination of Energy Use Efficiency of Sesame Production

    OpenAIRE

    BARAN, Mehmet Firat

    2018-01-01

    In this research it was aimed to determine an energy use efficiency of sesame production in Şanlıurfa province, during the production season of 2015. In order to determine the energy use efficiency of sesame production, trials and measurement were performed in sesame farm in the Bozova district of Şanlıurfa province. As energy inputs, human labour energy, machinery energy, chemical fertilizers energy, irrigation water energy, chemicals energy, diesel fuel energy and seed energy as were calcul...

  16. Biomass production efficiency controlled by management in temperate and boreal ecosystems

    Science.gov (United States)

    Campioli, M.; Vicca, S.; Luyssaert, S.; Bilcke, J.; Ceschia, E.; Chapin, F. S., III; Ciais, P.; Fernández-Martínez, M.; Malhi, Y.; Obersteiner, M.; Olefeldt, D.; Papale, D.; Piao, S. L.; Peñuelas, J.; Sullivan, P. F.; Wang, X.; Zenone, T.; Janssens, I. A.

    2015-11-01

    Plants acquire carbon through photosynthesis to sustain biomass production, autotrophic respiration and production of non-structural compounds for multiple purposes. The fraction of photosynthetic production used for biomass production, the biomass production efficiency, is a key determinant of the conversion of solar energy to biomass. In forest ecosystems, biomass production efficiency was suggested to be related to site fertility. Here we present a database of biomass production efficiency from 131 sites compiled from individual studies using harvest, biometric, eddy covariance, or process-based model estimates of production. The database is global, but dominated by data from Europe and North America. We show that instead of site fertility, ecosystem management is the key factor that controls biomass production efficiency in terrestrial ecosystems. In addition, in natural forests, grasslands, tundra, boreal peatlands and marshes, biomass production efficiency is independent of vegetation, environmental and climatic drivers. This similarity of biomass production efficiency across natural ecosystem types suggests that the ratio of biomass production to gross primary productivity is constant across natural ecosystems. We suggest that plant adaptation results in similar growth efficiency in high- and low-fertility natural systems, but that nutrient influxes under managed conditions favour a shift to carbon investment from the belowground flux of non-structural compounds to aboveground biomass.

  17. Improving radiation use efficiency in greenhouse production systems

    OpenAIRE

    Li, Tao

    2015-01-01

    SUMMARY A large increase in agricultural production is needed to feed the increasing world population with their increasing demand per capita. However, growing competition for arable land, water, energy, and the degradation of the environment impose challenges to improve crop production. Hence agricultural production efficiency needs to increase. Greenhouses provide the possibility to create optimal growth conditions for crops, thereby improving production and product quality. Light is the dr...

  18. The efficiency of aerodynamic force production in Drosophila.

    Science.gov (United States)

    Lehmann, F O

    2001-12-01

    Total efficiency of aerodynamic force production in insect flight depends on both the efficiency with which flight muscles turn metabolic energy into muscle mechanical power and the efficiency with which this power is converted into aerodynamic flight force by the flapping wings. Total efficiency has been estimated in tethered flying fruit flies Drosophila by modulating their power expenditures in a virtual reality flight simulator while simultaneously measuring stroke kinematics, locomotor performance and metabolic costs. During flight, muscle efficiency increases with increasing flight force production, whereas aerodynamic efficiency of lift production decreases with increasing forces. As a consequence of these opposite trends, total flight efficiency in Drosophila remains approximately constant within the kinematic working range of the flight motor. Total efficiency is broadly independent of different profile power estimates and typically amounts to 2-3%. The animal achieves maximum total efficiency near hovering flight conditions, when the beating wings produce flight forces that are equal to the body weight of the insect. It remains uncertain whether this small advantage in total efficiency during hovering flight was shaped by evolutionary factors or results from functional constraints on both the production of mechanical power by the indirect flight muscles and the unsteady aerodynamic mechanisms in flapping flight.

  19. Technical efficiency of watermelon ( Citrullus lanatus ) production in ...

    African Journals Online (AJOL)

    This study was designed to measure the level of technical efficiency, its determinants in watermelon (Citrullus lanatus) production and the constraints in the production system in Yewa North Local Government of Ogun State using a stochastic frontier production function. A combination of purposive and random sampling ...

  20. An analysis of the productivity and technical efficiency of smallholder ...

    African Journals Online (AJOL)

    This study used the stochastic frontier production function to analyse the productivity and technical efficiency of 4 different agricultural production systems in Ethiopia; namely, irrigated seasonal farms on traditional irrigation systems, irrigated seasonal farms on modern communal irrigation systems, rainfed seasonal farms for ...

  1. Improving Farmers' Efficiency in Rice Production In Nigeria: The ...

    African Journals Online (AJOL)

    This paper assesses the effects of extension services on farmers' efficiency and productivity in rice production in Kano State, Nigeria. Data for the study were collected from 126 rice farmers selected using multi stage sampling technique. Stochastic production frontier function was estimated to ascertain the effects of ...

  2. Analysis of product efficiency of hybrid vehicles and promotion policies

    International Nuclear Information System (INIS)

    Choi, Hyundo; Oh, Inha

    2010-01-01

    The key aim of this study is to evaluate the product efficiency of current hybrid vehicles and suggest effective policies to promote hybrid vehicles in the Korean automobile market and development trends of hybrid vehicles. The efficiency levels for car models sold in Korea, including hybrid ones, were measured using the recently developed discrete additive data envelopment analysis (DEA) model that reflects consumer preference. The result of the analysis shows that current hybrid vehicles on the market are still at lower competitive advantage than traditional car models with conventional combustion engines and we can suggest a mix of incentive policies to promote the competitiveness of hybrid vehicles. In addition, we also identify two distinctive trends of hybrid vehicle development: environment-oriented hybrid vehicles and performance-oriented hybrid vehicles. It implies that the government should take account of development trends of hybrid vehicles to achieve the policy goals in designing support schemes and automobile companies that are willing to develop hybrid vehicles can also gain some insights for making strategic decisions. (author)

  3. Product Knowledge Modelling and Management

    DEFF Research Database (Denmark)

    Zhang, Y.; MacCallum, K. J.; Duffy, Alex

    1996-01-01

    function-oriented design. Both Specific Product Knowledge and Product Domain Knowledge are modelled at two levels, a meta-model and an information-level.Following that, a computer-based scheme to manage the proposed product lknowledge models within a dynamically changing environment is presented.......The term, Product Knowledge is used to refer to two related but distinct concepts; the knowledge of a specific product (Specific Product Knowledge) and the knowledge of a product domain (Product Domain Knowledge). Modelling and managing Product Knowlege is an essential part of carrying out design.......A scheme is presented in this paper to model, i.e. classify, structure and formalise the product knowledge for the purpose of supporting function-oriented design. The product design specification and four types of required attributes of a specific product have been identified to form the Specific Product...

  4. Production Efficiency of Swamp Rice Production in Cross River ...

    African Journals Online (AJOL)

    This study compares profit maximization, output optimization and resource use efficiency in ... of two varieties of swamp rice by farmers in Cross River State of Nigeria. ... The result of the finding also shows that small-scale farmers were more ...

  5. Energy productivity and efficiency of wheat farming in Bangladesh

    International Nuclear Information System (INIS)

    Rahman, Sanzidur; Hasan, M. Kamrul

    2014-01-01

    Wheat is the second most important cereal crop in Bangladesh and production is highly sensitive to variations in the environment. We estimate productivity and energy efficiency of wheat farming in Bangladesh by applying a stochastic production frontier approach while accounting for the environmental constraints affecting production. Wheat farming is energy efficient with a net energy balance of 20,596 MJ per ha and energy ratio of 2.34. Environmental constraints such as a combination of unsuitable land, weed and pest attack, bad weather, planting delay and infertile soils significantly reduce wheat production and its energy efficiency. Environmental constraints account for a mean energy efficiency of 3 percentage points. Mean technical efficiency is 88% thereby indicating that elimination of inefficiencies can increase wheat energy output by 12%. Farmers' education, access to agricultural information and training in wheat production significantly improves efficiency, whereas events such as a delay in planting and first fertilization significantly reduce it. Policy recommendations include development of varieties that are resistant to environmental constraints and suitable for marginal areas; improvement of wheat farming practices; and investments in education and training of farmers as well as dissemination of information. - Highlights: • Bangladesh wheat farming is energy efficient at 20,596 MJha −1 ; energy ratio 2.34. • Environmental factors significantly influence productivity and energy efficiency. • Environmental factors must be taken into account when estimating wheat productivity. • Government policies must focus on ways of alleviating environmental factors. • Farmers' education, training and information sources increase technical efficiency

  6. Statistical modelling for ship propulsion efficiency

    DEFF Research Database (Denmark)

    Petersen, Jóan Petur; Jacobsen, Daniel J.; Winther, Ole

    2012-01-01

    This paper presents a state-of-the-art systems approach to statistical modelling of fuel efficiency in ship propulsion, and also a novel and publicly available data set of high quality sensory data. Two statistical model approaches are investigated and compared: artificial neural networks...

  7. Efficient Modelling and Generation of Markov Automata

    NARCIS (Netherlands)

    Koutny, M.; Timmer, Mark; Ulidowski, I.; Katoen, Joost P.; van de Pol, Jan Cornelis; Stoelinga, Mariëlle Ida Antoinette

    This paper introduces a framework for the efficient modelling and generation of Markov automata. It consists of (1) the data-rich process-algebraic language MAPA, allowing concise modelling of systems with nondeterminism, probability and Markovian timing; (2) a restricted form of the language, the

  8. Geometrical efficiency in computerized tomography: generalized model

    International Nuclear Information System (INIS)

    Costa, P.R.; Robilotta, C.C.

    1992-01-01

    A simplified model for producing sensitivity and exposure profiles in computerized tomographic system was recently developed allowing the forecast of profiles behaviour in the rotation center of the system. The generalization of this model for some point of the image plane was described, and the geometrical efficiency could be evaluated. (C.G.C.)

  9. Flight Test Maneuvers for Efficient Aerodynamic Modeling

    Science.gov (United States)

    Morelli, Eugene A.

    2011-01-01

    Novel flight test maneuvers for efficient aerodynamic modeling were developed and demonstrated in flight. Orthogonal optimized multi-sine inputs were applied to aircraft control surfaces to excite aircraft dynamic response in all six degrees of freedom simultaneously while keeping the aircraft close to chosen reference flight conditions. Each maneuver was designed for a specific modeling task that cannot be adequately or efficiently accomplished using conventional flight test maneuvers. All of the new maneuvers were first described and explained, then demonstrated on a subscale jet transport aircraft in flight. Real-time and post-flight modeling results obtained using equation-error parameter estimation in the frequency domain were used to show the effectiveness and efficiency of the new maneuvers, as well as the quality of the aerodynamic models that can be identified from the resultant flight data.

  10. Economic efficiency of extensive livestock production in the European Union

    Directory of Open Access Journals (Sweden)

    Nastić Lana

    2017-01-01

    Full Text Available Various types of extensive livestock production are present worldwide, primarily in regions where natural resources such as pastures and meadows could be used. Extensive livestock production is common in the EU, as well. Therefore the goal of this research was to establish economic efficiency of extensive livestock production types and to compare their efficiency with some intensive livestock production types. In order to achieve that goal FADN (Farm Accountancy Data Network methodology was used. Source of information was FADN database as well as appropriate sector analysis and publications of European commission. It has been determined that sheep and goat production is competitive with intensive production types (dairy and granivores - pigs and poultry. Cattle production (other than dairy production proved to be economically inefficient due to low output level.

  11. Essays on pig production efficiency and farmers' financial decisions under uncertainty

    OpenAIRE

    Labajova, Katarina.

    2018-01-01

    Recent structural changes in agricultural production towards fewer, but larger, units pose challenges for farmers in decision making about practical production and about managerial practices to increase efficiency, which are vital for farm productivity and profitability. In studies using mathematical programming and econometric models, this thesis evaluated farm-specific characteristics related to the individual technical efficiency (TE) of each input and output factor and of managerial chara...

  12. Structure model of energy efficiency indicators and applications

    International Nuclear Information System (INIS)

    Wu, Li-Ming; Chen, Bai-Sheng; Bor, Yun-Chang; Wu, Yin-Chin

    2007-01-01

    For the purposes of energy conservation and environmental protection, the government of Taiwan has instigated long-term policies to continuously encourage and assist industry in improving the efficiency of energy utilization. While multiple actions have led to practical energy saving to a limited extent, no strong evidence of improvement in energy efficiency was observed from the energy efficiency indicators (EEI) system, according to the annual national energy statistics and survey. A structural analysis of EEI is needed in order to understand the role that energy efficiency plays in the EEI system. This work uses the Taylor series expansion to develop a structure model for EEI at the level of the process sector of industry. The model is developed on the premise that the design parameters of the process are used in comparison with the operational parameters for energy differences. The utilization index of production capability and the variation index of energy utilization are formulated in the model to describe the differences between EEIs. Both qualitative and quantitative methods for the analysis of energy efficiency and energy savings are derived from the model. Through structural analysis, the model showed that, while the performance of EEI is proportional to the process utilization index of production capability, it is possible that energy may develop in a direction opposite to that of EEI. This helps to explain, at least in part, the inconsistency between EEI and energy savings. An energy-intensive steel plant in Taiwan was selected to show the application of the model. The energy utilization efficiency of the plant was evaluated and the amount of energy that had been saved or over-used in the production process was estimated. Some insights gained from the model outcomes are helpful to further enhance energy efficiency in the plant

  13. Resource Use Efficiency in Rice Production in Jere Local ...

    African Journals Online (AJOL)

    acer

    Descriptive statistics and production function were used as analytical tools. The result ..... women's active participation in agriculture. The result also .... Poverty Reduction. Through the ... and the Efficiencies of India Farm Using. Panel Data ...

  14. Efficient production of transgenic soybean (Glycine max [L] Merrill ...

    African Journals Online (AJOL)

    Efficient production of transgenic soybean (Glycine max [L] Merrill) plants mediated via whisker-supersonic (WSS) method. MM Khalafalla, HA El-Shemy, SM Rahman, M Teraishi, H Hasegawa, T Terakawa, M Ishimoto ...

  15. An Empirical Study of Strategic Positioning and Production Efficiency

    OpenAIRE

    Hsihui Chang; Guy D. Fernando; Arindam Tripathy

    2015-01-01

    We examine the relationship between strategic positioning of firms and their production efficiency. Firms with competitive advantages based on either cost leadership or differentiation are able to outperform their competitors. Firms pursuing a cost leadership strategy seek to be the lowest cost producer, primarily by minimizing inputs for a given level of output, thus concentrating on increasing the efficiency of their production processes. On the other hand, firms that pursue a differentiat...

  16. Productive efficiency of tea industry: A stochastic frontier approach ...

    African Journals Online (AJOL)

    In an economy where recourses are scarce and opportunities for a new technology are lacking, studies will be able to show the possibility of raising productivity by improving the industry's efficiency. This study attempts to measure the status of technical efficiency of tea-producing industry for panel data in Bangladesh using ...

  17. Implications of energy efficiency measures in wheat production

    DEFF Research Database (Denmark)

    Meyer-Aurich, Andreas; Ziegler, T.; Scholz, L.

    The economic and environmental effect of energy saving measures were analyzed for a typical wheat production system in Germany. The introduction of precision farming, reduced nitrogen fertilization and improved crop drying technologies proved to be efficient measures for enhancing energy efficiency...

  18. Evaluation of the efficiency of alternative enzyme production technologies

    Energy Technology Data Exchange (ETDEWEB)

    Albaek, M.O.

    2012-03-15

    Enzymes are used in an increasing number of industries. The application of enzymes is extending into the production of lignocellulosic ethanol in processes that economically can compete with fossil fuels. Since lignocellulosic ethanol is based on renewable resources it will have a positive impact on for example the emission of green house gasses. Cellulases and hemi-cellulases are used for enzymatic hydrolysis of pretreated lignocellulosic biomass, and fermentable sugars are released upon the enzymatic process. Even though many years of research has decreased the amount of enzyme needed in the process, the cost of enzymes is still considered a bottleneck in the economic feasibility of lignocellulose utilization. The purpose of this project was to investigate and compare different technologies for production of these enzymes. The filamentous fungus Trichoderma reesei is currently used for industrial production of cellulases and hemi-cellulases. The aim of the thesis was to use modeling tools to identify alternative technologies that have higher energy or raw material efficiency than the current technology. The enzyme production by T. reesei was conducted as an aerobic fed-batch fermentation. The process was carried out in pilot scale stirred tank reactors and based on a range of different process conditions, a process model was constructed which satisfactory described the course of fermentation. The process was governed by the rate limiting mass transfer of oxygen from the gas to the liquid phase. During fermentation, filamentous growth of the fungus lead to increased viscosity which hindered mass transfer. These mechanisms were described by a viscosity model based on the biomass concentration of the fermentation broth and a mass transfer correlation that incorporated a viscosity term. An analysis of the uncertainty and sensitivity of the model indicated the biological parameters to be responsible for most of the model uncertainty. A number of alternative

  19. Environmental assessment for the Consumer Products Efficiency Standards program

    Energy Technology Data Exchange (ETDEWEB)

    1980-05-23

    The Energy Policy and Conservation Act of 1975 as amended by the National Energy Conservation Policy Act of 1978, requires the DOE to prescribe energy efficiency standards for thirteen consumer products. The Consumer Products Efficiency Standards (CPES) program covers the following products: refrigerators and refrigerator-freezers; freezers;clothes dryers;water heaters; room air conditioners; home heating equipment (not including furnaces); kitchen ranges and ovens; central air conditioners (cooling and heat pumps); furnaces; dishwashers; television sets; clothes washers; and humidifiers and dehumidifiers. DOE is proposing two sets of standards for all thirteen consumer products: intermediate standards to become effective in 1981 for the first nine products and in 1982 for the second four products, and final standards to become effective in 1986 and 1987, respectively. The final standards are more restrictive than the intermediate standards and will provide manufacturers with the maximum time permitted under the Act to plan and develop extensive new lines of efficient consumer products. The final standards proposed by DOE require the maximum improvements in efficiency which are technologically feasible and economically justified, as required by Section 325(c) of EPCA. The thirteen consumer products account for approximately 90% of all the energy consumed in the nation's residences, or more than 20% of the nation's energy needs. Increases in the energy efficiency of these consumer products can help to narrow the gap between the nation's increasing demand for energy and decreasing supplies of domestic oil and natural gas. Improvements in the efficiency of consumer products can thus help to solve the nation's energy crisis.

  20. Efficiently adapting graphical models for selectivity estimation

    DEFF Research Database (Denmark)

    Tzoumas, Kostas; Deshpande, Amol; Jensen, Christian S.

    2013-01-01

    cardinality estimation without making the independence assumption. By carefully using concepts from the field of graphical models, we are able to factor the joint probability distribution over all the attributes in the database into small, usually two-dimensional distributions, without a significant loss...... in estimation accuracy. We show how to efficiently construct such a graphical model from the database using only two-way join queries, and we show how to perform selectivity estimation in a highly efficient manner. We integrate our algorithms into the PostgreSQL DBMS. Experimental results indicate...

  1. Estimating shadow prices and efficiency analysis of productive inputs and pesticide use of vegetable production

    NARCIS (Netherlands)

    Singbo, Alphonse G.; Lansink, Alfons Oude; Emvalomatis, Grigorios

    2015-01-01

    This paper analyzes technical efficiency and the value of the marginal product of productive inputs vis-a-vis pesticide use to measure allocative efficiency of pesticide use along productive inputs. We employ the data envelopment analysis framework and marginal cost techniques to estimate

  2. Technical efficiency in pig production in Akwa Ibom State, Nigeria ...

    African Journals Online (AJOL)

    This study was designed to measure the level of technical efficiency and its determinants in pig production in Akwa Ibom State, Nigeria using a stochastic frontier production function. Multistage random sampling technique was used to select 60 pig farms from which input-output data were collected in 2004. The estimated ...

  3. Maximum herd efficiency in meat production I. Optima for slaughter ...

    African Journals Online (AJOL)

    Profit rate for a meat production enterprise can be decomposedinto the unit price for meat and herd ... supply and demand, whereas breeding improvement is gen- ... Herd efficiency is total live mass for slaughter divided by costs .... tenance and above-maintenance components by Dickerson, and ..... Growth and productivity.

  4. Endogeneity Corrected Stochastic Production Frontier and Technical Efficiency

    NARCIS (Netherlands)

    Shee, A.; Stefanou, S.E.

    2015-01-01

    A major econometric issue in estimating production parameters and technical efficiency is the possibility that some forces influencing production are only observed by the firm and not by the econometrician. Not only can this misspecification lead to a biased inference on the output elasticity of

  5. International benchmaking: Supplying the information for product efficiency policy makers

    NARCIS (Netherlands)

    Siderius, H.P.; Jeffcott, S.; Blok, K.

    2012-01-01

    In the development of effective product efficiency policy, the critical element for policy makers is comprehensive, independent information. However, easily accessible, reliable information on the energy performance of products and policies is often scarce within a particular market, and rarer still

  6. Cambridge journals blog: Improving feed efficiency in dairy production

    Science.gov (United States)

    Because the cost of feeding animals is one of the greatest expenses in dairy production (40-60% of production costs), research focused on ways to identify and select for animals that are the most efficient at converting feed into milk has greatly expanded during the last decade. The animal Article o...

  7. Towards a more efficient energy use in photovoltaic powered products

    NARCIS (Netherlands)

    Kan, S.Y.; Strijk, R.

    2006-01-01

    This paper analyzes the energy saving and power management solutions necessary to improve the energy consumption efficiency in photovoltaic powered products. Important in the design of such products is not only the energy supply optimization required to deliver the actual energy to fulfil their

  8. Modeling the Efficiency of a Germanium Detector

    Science.gov (United States)

    Hayton, Keith; Prewitt, Michelle; Quarles, C. A.

    2006-10-01

    We are using the Monte Carlo Program PENELOPE and the cylindrical geometry program PENCYL to develop a model of the detector efficiency of a planar Ge detector. The detector is used for x-ray measurements in an ongoing experiment to measure electron bremsstrahlung. While we are mainly interested in the efficiency up to 60 keV, the model ranges from 10.1 keV (below the Ge absorption edge at 11.1 keV) to 800 keV. Measurements of the detector efficiency have been made in a well-defined geometry with calibrated radioactive sources: Co-57, Se-75, Ba-133, Am-241 and Bi-207. The model is compared with the experimental measurements and is expected to provide a better interpolation formula for the detector efficiency than simply using x-ray absorption coefficients for the major constituents of the detector. Using PENELOPE, we will discuss several factors, such as Ge dead layer, surface ice layer and angular divergence of the source, that influence the efficiency of the detector.

  9. POSSIBILITIES OF INCREASING EFFICIENCY WITHIN SERIAL PRODUCTION MANAGEMENT

    Directory of Open Access Journals (Sweden)

    CODRUŢA DURA

    2010-01-01

    Full Text Available Under the impact of transition to the new post-industrial society, massproduction recently faced the most numerous difficulties. They are caused by turbulences in theexternal environment in which companies operate, manifested in particular by enhancing thedynamism of markets and by deep changes in the structure of consumers’ demands. In thiscontext, specialized literature records the concerns for increasing the efficiency and flexibilityof products, elements involving radical changes of management and manufacturingtechnologies methods. Given these issues, the paper approaches two separate ways to improvethe management of serial production: increasing economic efficiency by optimizing the size ofbatches and flexible production systems by implementing techniques to reduce the change-overtime.

  10. Hybrid Building Performance Simulation Models for Industrial Energy Efficiency Applications

    Directory of Open Access Journals (Sweden)

    Peter Smolek

    2018-06-01

    Full Text Available In the challenge of achieving environmental sustainability, industrial production plants, as large contributors to the overall energy demand of a country, are prime candidates for applying energy efficiency measures. A modelling approach using cubes is used to decompose a production facility into manageable modules. All aspects of the facility are considered, classified into the building, energy system, production and logistics. This approach leads to specific challenges for building performance simulations since all parts of the facility are highly interconnected. To meet this challenge, models for the building, thermal zones, energy converters and energy grids are presented and the interfaces to the production and logistics equipment are illustrated. The advantages and limitations of the chosen approach are discussed. In an example implementation, the feasibility of the approach and models is shown. Different scenarios are simulated to highlight the models and the results are compared.

  11. Environmental assessment. Energy efficiency standards for consumer products

    Energy Technology Data Exchange (ETDEWEB)

    McSwain, Berah

    1980-06-01

    The Energy Policy and Conservation Act of 1975 requires DOE to prescribe energy efficiency standards for 13 consumer products. The Consumer Products Efficiency Standards (CPES) program covers: refrigerators and refrigerator-freezers, freezers, clothes dryers, water heaters, room air conditioners, home heating equipment, kitchen ranges and ovens, central air conditioners (cooling and heat pumps), furnaces, dishwashers, television sets, clothes washers, and humidifiers and dehumidifiers. This Environmental Assessment evaluates the potential environmental and socioeconomic impacts expected as a result of setting efficiency standards for all of the consumer products covered by the CPES program. DOE has proposed standards for eight of the products covered by the Program in a Notice of Proposed Rulemaking (NOPR). DOE expects to propose standards for home heating equipment, central air conditioners (heat pumps only), dishwashers, television sets, clothes washers, and humidifiers and dehumidifiers in 1981. No significant adverse environmental or socioeconomic impacts have been found to result from instituting the CPES.

  12. Modeling of alpha mass-efficiency curve

    International Nuclear Information System (INIS)

    Semkow, T.M.; Jeter, H.W.; Parsa, B.; Parekh, P.P.; Haines, D.K.; Bari, A.

    2005-01-01

    We present a model for efficiency of a detector counting gross α radioactivity from both thin and thick samples, corresponding to low and high sample masses in the counting planchette. The model includes self-absorption of α particles in the sample, energy loss in the absorber, range straggling, as well as detector edge effects. The surface roughness of the sample is treated in terms of fractal geometry. The model reveals a linear dependence of the detector efficiency on the sample mass, for low masses, as well as a power-law dependence for high masses. It is, therefore, named the linear-power-law (LPL) model. In addition, we consider an empirical power-law (EPL) curve, and an exponential (EXP) curve. A comparison is made of the LPL, EPL, and EXP fits to the experimental α mass-efficiency data from gas-proportional detectors for selected radionuclides: 238 U, 230 Th, 239 Pu, 241 Am, and 244 Cm. Based on this comparison, we recommend working equations for fitting mass-efficiency data. Measurement of α radioactivity from a thick sample can determine the fractal dimension of its surface

  13. Global parameterization and validation of a two-leaf light use efficiency model for predicting gross primary production across FLUXNET sites

    Czech Academy of Sciences Publication Activity Database

    Zhou, Y.; Wu, X.; Weiming, J.; Chen, J.; Wang, S.; Wang, H.; Wenping, Y.; Black, T. A.; Jassal, R.; Ibrom, A.; Han, S.; Yan, J.; Margolis, H.; Roupsard, O.; Li, Y.; Zhao, F.; Kiely, G.; Starr, G.; Pavelka, Marian; Montagnani, L.; Wohlfahrt, G.; D'Odorico, P.; Cook, D.; Altaf Arain, M.; Bonal, D.; Beringer, J.; Blanken, P. D.; Loubet, B.; Leclerc, M. Y.; Matteucci, G.; Nagy, Z.; Olejnik, Janusz; U., K. T. P.; Varlagin, A.

    2016-01-01

    Roč. 36, č. 7 (2016), s. 2743-2760 ISSN 2169-8953 Institutional support: RVO:67179843 Keywords : global parametrization * predicting model * FlUXNET Subject RIV: EH - Ecology, Behaviour Impact factor: 3.395, year: 2016

  14. Modeling Novo Nordisk Production Systems

    DEFF Research Database (Denmark)

    Miller, Thomas Dedenroth

    1997-01-01

    This report describes attributes of models and systems, and how models can be used for description of production systems. There are special attention on the 'Theory of Domains'.......This report describes attributes of models and systems, and how models can be used for description of production systems. There are special attention on the 'Theory of Domains'....

  15. Efficient Iris Localization via Optimization Model

    Directory of Open Access Journals (Sweden)

    Qi Wang

    2017-01-01

    Full Text Available Iris localization is one of the most important processes in iris recognition. Because of different kinds of noises in iris image, the localization result may be wrong. Besides this, localization process is time-consuming. To solve these problems, this paper develops an efficient iris localization algorithm via optimization model. Firstly, the localization problem is modeled by an optimization model. Then SIFT feature is selected to represent the characteristic information of iris outer boundary and eyelid for localization. And SDM (Supervised Descent Method algorithm is employed to solve the final points of outer boundary and eyelids. Finally, IRLS (Iterative Reweighted Least-Square is used to obtain the parameters of outer boundary and upper and lower eyelids. Experimental result indicates that the proposed algorithm is efficient and effective.

  16. Design of China Leading Energy Efficiency Program (LEP) for equipment and appliances and comparative study of international experience on super-efficient products

    Science.gov (United States)

    Liang, Xiuying; Zhu, Chunyan

    2017-11-01

    With rising global emphasizes on climate change and sustainable development, how to accelerate the transformation of energy efficiency has become an important question. Designing and implementing energy-efficiency policies for super-efficient products represents an important direction to achieve breakthroughs in the field of energy conservation. On December 31, 2014, China’s National Development and Reform Commission (NDRC) jointly six other ministerial agencies launched China Leading Energy Efficiency Program (LEP), which identifies top efficiency models for selected product categories. LEP sets the highest energy efficiency benchmark. Design of LEP took into consideration of how to best motivate manufacturers to accelerate technical innovation, promote high efficiency products. This paper explains core elements of LEP, such as objectives, selection criteria, implementation method and supportive policies. It also proposes recommendations to further improve LEP through international policy comparison with Japan’s Top Runner Program, U.S. Energy Star Most Efficient, and SEAD Global Efficiency Medal.

  17. Efficiency of dairy production on a family farm

    Directory of Open Access Journals (Sweden)

    Zoran Grgić

    2002-01-01

    Full Text Available This paper presents the evaluation of economic efficiency of dairyproduction on a family farm with 14 dairy cows in the breeding stock, and with average production from 3.206 to 3.407 lit. of milk annually. On the basis of survey data for three-year period from 1998 to 2000, economic indicators were calculated, as well as the cost price of milk, income and the revenue of total production and per production head. In the family farm with an average annual sale from 2.827 to 2.972 lit. of milk per head, total revenue has been realized from 44.884 to 47.695 kuna and the profit from 606 to 8.515 kuna. Revenues per production head were from 5.655 to 6.495 kuna and the profitfrom 177 to 726 kuna. The milk cost price in the analyzed period was 1.71, 1.66 and 1.69 kn. per lit, and the profit per liter of milk was 0.06, and 0.21 kn. Basic economic indicators point out on efficiency of dairy production for the investigated farm on the stated production level. The biggest influence on the dairy production efficiency on the farm, regarding the cost price structure, has been registered from the costs of fodder production, while the favorable parity of the cost price and producer-sale price of milk determines the increase in dairy production efficiency and income from dairy production in the analyzed period.

  18. Efficient protein production by yeast requires global tuning of metabolism

    DEFF Research Database (Denmark)

    Huang, Mingtao; Bao, Jichen; Hallstrom, Bjorn M.

    2017-01-01

    The biotech industry relies on cell factories for production of pharmaceutical proteins, of which several are among the top-selling medicines. There is, therefore, considerable interest in improving the efficiency of protein production by cell factories. Protein secretion involves numerous...... intracellular processes with many underlying mechanisms still remaining unclear. Here, we use RNA-seq to study the genome-wide transcriptional response to protein secretion in mutant yeast strains. We find that many cellular processes have to be attuned to support efficient protein secretion. In particular...... that by tuning metabolism cells are able to efficiently secrete recombinant proteins. Our findings provide increased understanding of which cellular regulations and pathways are associated with efficient protein secretion....

  19. ACO model should encourage efficient care delivery.

    Science.gov (United States)

    Toussaint, John; Krueger, David; Shortell, Stephen M; Milstein, Arnold; Cutler, David M

    2015-09-01

    The independent Office of the Actuary for CMS certified that the Pioneer ACO model has met the stringent criteria for expansion to a larger population. Significant savings have accrued and quality targets have been met, so the program as a whole appears to be working. Ironically, 13 of the initial 32 enrollees have left. We attribute this to the design of the ACO models which inadequately support efficient care delivery. Using Bellin-ThedaCare Healthcare Partners as an example, we will focus on correctible flaws in four core elements of the ACO payment model: finance spending and targets, attribution, and quality performance. Copyright © 2015 Elsevier Inc. All rights reserved.

  20. Modelling spatial and temporal dynamics of gross primary production in the Sahel from earth-observation-based photosynthetic capacity and quantum efficiency

    DEFF Research Database (Denmark)

    Tagesson, Håkan Torbern; Ardoe, Jonas; Cappelaere, Bernard

    2017-01-01

    based on earth observation (EO) (normalized difference vegetation index (NDVI), renormalized difference vegetation index (RDVI), enhanced vegetation index (EVI) and shortwave infrared water stress index (SIWSI)); and (3) to study the applicability of EO upscaled Fopt and α for GPP modelling purposes...... impacted by anthropogenic land use. Upscaled GPP for the Sahel 2001-2014 was 736 ± 39 gCm-2yr-1. This study indicates the strong applicability of EO as a tool for spatially explicit estimates of GPP, Fopt and α incorporating EO-based Fopt and α in dynamic global vegetation models could improve estimates...

  1. Efficient promotion of electricity production from offshore wind

    International Nuclear Information System (INIS)

    Panzer, Christian; Auer, Hans; Lettner, Georg

    2014-01-01

    Efficient promotion of electricity production from offshore wind stands in dynamic relationship with various influence factors, the most important of which are promotion instruments, topographic givens, regulation of grid connection, and supraregional market integration concepts. Using three case studies from different countries to highlight national differences in the promotion of offshore wind power plants the present analysis points out ways of improving the efficiency of promotion instruments.

  2. Energy efficiency resource modeling in generation expansion planning

    International Nuclear Information System (INIS)

    Ghaderi, A.; Parsa Moghaddam, M.; Sheikh-El-Eslami, M.K.

    2014-01-01

    Energy efficiency plays an important role in mitigating energy security risks and emission problems. In this paper, energy efficiency resources are modeled as efficiency power plants (EPP) to evaluate their impacts on generation expansion planning (GEP). The supply curve of EPP is proposed using the production function of electricity consumption. A decision making framework is also presented to include EPP in GEP problem from an investor's point of view. The revenue of EPP investor is obtained from energy cost reduction of consumers and does not earn any income from electricity market. In each stage of GEP, a bi-level model for operation problem is suggested: the upper-level represents profit maximization of EPP investor and the lower-level corresponds to maximize the social welfare. To solve the bi-level problem, a fixed-point iteration algorithm is used known as diagonalization method. Energy efficiency feed-in tariff is investigated as a regulatory support scheme to encourage the investor. Results pertaining to a case study are simulated and discussed. - Highlights: • An economic model for energy efficiency programs is presented. • A framework is provided to model energy efficiency resources in GEP problem. • FIT is investigated as a regulatory support scheme to encourage the EPP investor. • The capacity expansion is delayed and reduced with considering EPP in GEP. • FIT-II can more effectively increase the energy saving compared to FIT-I

  3. The Efficiency of Damage Production in Silicon Carbide

    International Nuclear Information System (INIS)

    Weber, William J.; Gao, Fei; Devanathan, Ram; Jiang, Weilin

    2004-01-01

    Molecular dynamics simulations are used to study the statistics of damage production in 3C-SiC due to C, Si and Au primary knock-on atoms (PKAs) over energies from 0.25 to 50 keV. In order to account for the different displacement energies on the Si and C sublattices and accurately assess the damage efficiency, a modified version of the SRIM (Stopping and Range of Ions in Matter) code, with the electronic stopping turned off to duplicate the molecular dynamics conditions, was used to calculate the statistics of damage production for the same PKAs over the energy range from 0.1 to 400 keV under the binary collision approximation using threshold displacement energies of 20 and 35 eV for C and Si, respectively. Using the modified SRIM predictions as a reference, the efficiencies of total damage production are determined for C, Si and Au PKAs as functions of energy. The efficiency for production of C displacements is similar for all PKAs; however, C PKAs have a much lower efficiency for producing stable Si displacements than Si and Au PKAs, which leads to a much higher ratio of C to Si displacements for C PKAs. These results are consistent with the experimental damage production behavior observed in SiC irradiated with C, Si and Au ions at 150 K

  4. The efficiency of damage production in silicon carbide

    International Nuclear Information System (INIS)

    Weber, W.J.; Gao, F.; Devanathan, R.; Jiang, W.

    2004-01-01

    Molecular dynamics (MD) simulations are used to study the statistics of damage production in 3C-SiC due to C, Si and Au primary knock-on atoms (PKAs) over energies from 0.25 to 50 keV. In order to account for the different displacement energies on the Si and C sublattices and accurately assess the damage efficiency, a modified version of the SRIM (stopping and range of ions in matter) code, with the electronic stopping turned off to duplicate the MD conditions, was used to calculate the statistics of damage production for the same PKAs over the energy range from 0.1 to 400 keV under the binary collision approximation using threshold displacement energies of 20 and 35 eV for C and Si, respectively. Using the modified SRIM predictions as a reference, the efficiencies of total damage production are determined for C, Si and Au PKAs as functions of energy. The efficiency for production of C displacements is similar for all PKAs; however, C PKAs have a much lower efficiency for producing stable Si displacements than Si and Au PKAs, which leads to a much higher ratio of C to Si displacements for C PKAs. These results are consistent with the experimental damage production behavior observed in SiC irradiated with C, Si and Au ions at 150 K

  5. PRODUCT STRUCTURE DIGITAL MODEL

    Directory of Open Access Journals (Sweden)

    V.M. Sineglazov

    2005-02-01

    Full Text Available  Research results of representation of product structure made by means of CADDS5 computer-aided design (CAD system, Product Data Management Optegra (PDM system and Product Life Cycle Management Wind-chill system (PLM, are examined in this work. Analysis of structure component development and its storage in various systems is carried out. Algorithms of structure transformation required for correct representation of the structure are considered. Management analysis of electronic mockup presentation of the product structure is carried out for Windchill system.

  6. Analyzing cost efficient production behavior under economies of scope : A nonparametric methodology

    NARCIS (Netherlands)

    Cherchye, L.J.H.; de Rock, B.; Vermeulen, F.M.P.

    2008-01-01

    In designing a production model for firms that generate multiple outputs, we take as a starting point that such multioutput production refers to economies of scope, which in turn originate from joint input use and input externalities. We provide a nonparametric characterization of cost-efficient

  7. Analyzing Cost Efficient Production Behavior Under Economies of Scope : A Nonparametric Methodology

    NARCIS (Netherlands)

    Cherchye, L.J.H.; de Rock, B.; Vermeulen, F.M.P.

    2006-01-01

    In designing a production model for firms that generate multiple outputs, we take as a starting point that such multi-output production refers to economies of scope, which in turn originate from joint input use and input externalities. We provide a nonparametric characterization of cost efficient

  8. Efficient Bayesian network modeling of systems

    International Nuclear Information System (INIS)

    Bensi, Michelle; Kiureghian, Armen Der; Straub, Daniel

    2013-01-01

    The Bayesian network (BN) is a convenient tool for probabilistic modeling of system performance, particularly when it is of interest to update the reliability of the system or its components in light of observed information. In this paper, BN structures for modeling the performance of systems that are defined in terms of their minimum link or cut sets are investigated. Standard BN structures that define the system node as a child of its constituent components or its minimum link/cut sets lead to converging structures, which are computationally disadvantageous and could severely hamper application of the BN to real systems. A systematic approach to defining an alternative formulation is developed that creates chain-like BN structures that are orders of magnitude more efficient, particularly in terms of computational memory demand. The formulation uses an integer optimization algorithm to identify the most efficient BN structure. Example applications demonstrate the proposed methodology and quantify the gained computational advantage

  9. Efficient family-based model checking via variability abstractions

    DEFF Research Database (Denmark)

    Dimovski, Aleksandar; Al-Sibahi, Ahmad Salim; Brabrand, Claus

    2016-01-01

    with the abstract model checking of the concrete high-level variational model. This allows the use of Spin with all its accumulated optimizations for efficient verification of variational models without any knowledge about variability. We have implemented the transformations in a prototype tool, and we illustrate......Many software systems are variational: they can be configured to meet diverse sets of requirements. They can produce a (potentially huge) number of related systems, known as products or variants, by systematically reusing common parts. For variational models (variational systems or families...... of related systems), specialized family-based model checking algorithms allow efficient verification of multiple variants, simultaneously, in a single run. These algorithms, implemented in a tool Snip, scale much better than ``the brute force'' approach, where all individual systems are verified using...

  10. Thin Film Packaging Solutions for High Efficiency OLED Lighting Products

    Energy Technology Data Exchange (ETDEWEB)

    None

    2008-06-30

    was characterized as having less than 10% change in transmission during the 15,000 hour test period; (3) demonstrated thin film encapsulation of a phosphorescent OLED device with 1,500 hours of lifetime at 60 C and 80% RH; (4) demonstrated that a thin film laminate encapsulation, in addition to the direct thin film deposition process, of a polymer OLED device was another feasible packaging strategy for OLED lighting. The thin film laminate strategy was developed to mitigate defects, demonstrate roll-to-roll process capability for high volume throughput (reduce costs) and to support a potential commercial pathway that is less dependent upon integrated manufacturing since the laminate could be sold as a rolled good; (5) demonstrated that low cost 'blue' glass substrates could be coated with a siloxane barrier layer for planarization and ion-protection and used in the fabrication of a polymer OLED lighting device. This study further demonstrated that the substrate cost has potential for huge cost reductions from the white borosilicate glass substrate currently used by the OLED lighting industry; (6) delivered four-square feet of white phosphorescent OLED technology, including novel high efficiency devices with 82 CRI, greater than 50 lm/W efficiency, and more than 1,000 hours lifetime in a product concept model shelf; (7) presented and or published more than twenty internal studies (for private use), three external presentations (OLED workshop-for public use), and five technology-related external presentations (industry conferences-for public use); and (8) issued five patent applications, which are in various maturity stages at time of publication. Delivery of thin film encapsulated white phosphorescent OLED lighting technology remains a challenging technical achievement, and it seems that commercial availability of thin, bright, white OLED light that meets market requirements will continue to require research and development effort. However, there will be

  11. Improved production efficiency in cattle to reduce their carbon ...

    African Journals Online (AJOL)

    p2492989

    Keywords: Methane, global warming, greenhouse gas, crossbreeding, residual feed intake, feed efficiency. #Corresponding ... improved production per constant unit, crossbreeding and selection for residual feed intake. ... convert such a measure into kg calf produced per kg CO2 equivalent (CH4 can be converted to a CO2.

  12. Efficiency, Effectiveness and Productivity: The Abstract Measures of ...

    African Journals Online (AJOL)

    This paper makes a case for reviving the system. Efficiency, effectiveness and productivity which are all quality indices are carefully discussed and synthesized into management techniques that will create in the staff and management officials the culture of excellent performance in our higher educational system.

  13. Resource Use Efficiency in Rice Production in Jere Local ...

    African Journals Online (AJOL)

    The study was carried-out on resource use efficiency in rice production in Jere Local Government Area of Borno State, Nigeria. Data were obtained using structured questionnaire. Five (5) wards were purposely selected out of the twelve (12) wards to reflect areas where rice is mainly grown. A total of 100 respondents were ...

  14. Analysis of economic efficiency in cocoa production in Ghana ...

    African Journals Online (AJOL)

    The main purpose of this study was to analyze the economic efficiency of resource utilization in cocoa production of the cocoa farmers in Ghana to provide information for effective application and management of farm inputs on cocoa farms and policy recommendation. A random sample of 300 farmers in the Eastern, Ashanti ...

  15. Growth, light interception, radiation use efficiency and productivity of ...

    African Journals Online (AJOL)

    The purpose of this study was to assess the influence of sowing date on growth, light interception, radiation use efficiency and productivity of mungbean cultivars. The experiment comprised four sowing dates at ten days interval, viz. 08, 18, 28 July and 07 August 2006 and two cultivars, viz. Gofa local and MH-97-6.

  16. Economic efficiency of maize production in Yola North Local ...

    African Journals Online (AJOL)

    Similarly, the efficiency ratio computed showed that land, seed and fertilizer had MVP/MFC ratio greater than unity implying that the inputs were underutilized and output could be increased by increasing the levels of their utilization. The elasticity of production was greater than 1.00 which implied increasing return to scale.

  17. Informatics in radiology: Efficiency metrics for imaging device productivity.

    Science.gov (United States)

    Hu, Mengqi; Pavlicek, William; Liu, Patrick T; Zhang, Muhong; Langer, Steve G; Wang, Shanshan; Place, Vicki; Miranda, Rafael; Wu, Teresa Tong

    2011-01-01

    Acute awareness of the costs associated with medical imaging equipment is an ever-present aspect of the current healthcare debate. However, the monitoring of productivity associated with expensive imaging devices is likely to be labor intensive, relies on summary statistics, and lacks accepted and standardized benchmarks of efficiency. In the context of the general Six Sigma DMAIC (design, measure, analyze, improve, and control) process, a World Wide Web-based productivity tool called the Imaging Exam Time Monitor was developed to accurately and remotely monitor imaging efficiency with use of Digital Imaging and Communications in Medicine (DICOM) combined with a picture archiving and communication system. Five device efficiency metrics-examination duration, table utilization, interpatient time, appointment interval time, and interseries time-were derived from DICOM values. These metrics allow the standardized measurement of productivity, to facilitate the comparative evaluation of imaging equipment use and ongoing efforts to improve efficiency. A relational database was constructed to store patient imaging data, along with device- and examination-related data. The database provides full access to ad hoc queries and can automatically generate detailed reports for administrative and business use, thereby allowing staff to monitor data for trends and to better identify possible changes that could lead to improved productivity and reduced costs in association with imaging services. © RSNA, 2011.

  18. Resource Use Efficiency in Sweet Potato Production in Kwara State ...

    African Journals Online (AJOL)

    This paper examines resource use efficiency in sweet potato production in Offa and Oyun local government areas of Kwara State of Nigeria. Primary data were collected from one hundred sweet potato farmers who were selected from the two local government areas during the 2003/2004 farming season. The data was ...

  19. Cost-efficiency of animal welfare in broiler production systems

    NARCIS (Netherlands)

    Gocsik, Éva; Brooshooft, Suzanne D.; Jong, de Ingrid C.; Saatkamp, Helmut W.

    2016-01-01

    Broiler producers operate in a highly competitive and cost-price driven environment. In addition, in recent years the societal pressure to improve animal welfare (AW) in broiler production systems is increasing. Hence, from an economic and decision making point of view, the cost-efficiency of

  20. Economic efficiency of cocoa production in Ghana | Aneani | Journal ...

    African Journals Online (AJOL)

    The main purpose of this study was to analyze the economic efficiency of resource utilization in cocoa production among cocoa farmers in Ghana to provide information for effective application and management of farm input on cocoa farms. A random sample of 300 farmers was selected in six cocoa growing districts in ...

  1. Efficiency analysis of hydrogen production methods from biomass

    NARCIS (Netherlands)

    Ptasinski, K.J.

    2008-01-01

    Abstract: Hydrogen is considered as a universal energy carrier for the future, and biomass has the potential to become a sustainable source of hydrogen. This article presents an efficiency analysis of hydrogen production processes from a variety of biomass feedstocks by a thermochemical method –

  2. Non-parametric analysis of production efficiency of poultry egg ...

    African Journals Online (AJOL)

    Non-parametric analysis of production efficiency of poultry egg farmers in Delta ... analysis of factors affecting the output of poultry farmers showed that stock ... should be put in place for farmers to learn the best farm practices carried out on the ...

  3. Modelling energy consumption in a manufacturing plant using productivity KPIs

    Energy Technology Data Exchange (ETDEWEB)

    Gallachoir, Brian O.; Cahill, Caiman (Sustainable Energy Research Group, Dept. of Civil and Environmental Engineering, Univ. College Cork (Ireland))

    2009-07-01

    Energy efficiency initiatives in industrial plants are often focused on getting energy-consuming utilities and devices to operate more efficiently, or on conserving energy. While such device-oriented energy efficiency measures can achieve considerable savings, greater energy efficiency improvement may be achieved by improving the overall productivity and quality of manufacturing processes. The paper highlights the observed relationship between productivity and energy efficiency using aggregated data on unit consumption and production index data for Irish industry. Past studies have developed simple top-down models of final energy consumption in manufacturing plants using energy consumption and production output figures, but these models do not help identify opportunities for energy savings that could achieved through increased productivity. This paper proposes an improved and innovative method of modelling plant final energy demand that introduces standard productivity Key Performance Indicators (KPIs) into the model. The model demonstrates the relationship between energy consumption and productivity, and uses standard productivity metrics to identify the areas of manufacturing activity that offer the most potential for improved energy efficiency. The model provides a means of comparing the effect of device-oriented energy efficiency measures with the potential for improved energy efficiency through increased productivity.

  4. Product lifetime, energy efficiency and climate change: A case study of air conditioners in Japan.

    Science.gov (United States)

    Nishijima, Daisuke

    2016-10-01

    This study proposed a modelling technique for estimating life-cycle CO2 emissions of durable goods by considering changes in product lifetime and energy efficiency. The stock and flow of durable goods was modelled by Weibull lifetime distributions and the trend in annual energy efficiency (i.e., annual electricity consumption) of an "average" durable good was formulated as a reverse logistic curve including a technologically critical value (i.e., limit energy efficiency) with respect to time. I found that when the average product lifetime is reduced, there is a trade-off between the reduction in emissions during product use (use phase), due to the additional purchases of new, more energy-efficient air conditioners, and the increase in emissions arising from the additional production of new air conditioners stimulated by the reduction of the average product lifetime. A scenario analysis focused on residential air conditioners in Japan during 1972-2013 showed that for a reduction of average lifetime of 1 year, if the air conditioner energy efficiency limit can be improved by 1.4% from the estimated current efficiency level, then CO2 emissions can be reduced by approximately the same amount as for an extension of average product lifetime of 1 year. Copyright © 2016 Elsevier Ltd. All rights reserved.

  5. MASS CUSTOMIZATION and PRODUCT MODELS

    DEFF Research Database (Denmark)

    Svensson, Carsten; Malis, Martin

    2003-01-01

    to the product. Through the application of a mass customization strategy, companies have a unique opportunity to create increased customer satisfaction. In a customized production, knowledge and information have to be easily accessible since every product is a unique combination of information. If the dream...... of a customized alternative instead of a uniform mass-produced product shall become a reality, then the cross-organizational efficiency must be kept at a competitive level. This is the real challenge for mass customization. A radical restructuring of both the internal and the external knowledge management systems...

  6. Technical efficiency in milk production in underdeveloped production environment of India*.

    Science.gov (United States)

    Bardhan, Dwaipayan; Sharma, Murari Lal

    2013-12-01

    The study was undertaken in Kumaon division of Uttarakhand state of India with the objective of estimating technical efficiency in milk production across different herd-size category households and factors influencing it. Total of 60 farm households having representation from different herd-size categories drawn from six randomly selected villages of plain and hilly regions of the division constituted the ultimate sampling units of the study. Stochastic frontier production function analysis was used to estimate the technical efficiency in milk production. Multivariate regression equations were fitted taking technical efficiency index as the regressand to identify the factors significantly influencing technical efficiency in milk production. The study revealed that variation in output across farms in the study area was due to difference in their technical efficiency levels. However, it was interesting to note that smallholder producers were more technically efficient in milk production than their larger counterparts, especially in the plains. Apart from herd size, intensity of market participation had significant and positive impact on technical efficiency in the plains. This provides definite indication that increasing the level of commercialization of dairy farms would have beneficial impact on their production efficiency.

  7. Profitability and Technical Efficiency of Soybean Production in Northern Nigeria

    Directory of Open Access Journals (Sweden)

    Ugbabe, OO.

    2017-01-01

    Full Text Available The International Institute of Tropical Agriculture and collaborating partners have been introducing and disseminating short season soybean varieties among farm households in the Sudan savannas of Northern Nigeria since 2008. Yet, there is no empirical information on the profitability and technical efficiency of soybean production. This study estimated the profitability and efficiency of production of the early maturing soybean. Nine hundred soybean farming households in thirty communities from three Local Government Areas (LGAs in Kano State were sampled for the study. Partial budget technique and stochastic frontier production function were used to analyze the data elicited from the sampled farm households. Results from the study established the profitability of soybean production in all the three LGAs of Kano State. The highest profit of N178,613/ha and returns per naira invested of 2.5 respectively was earned by the soybean producing households of Dawakin-Tofa LGA. Net profit was N157,261in Shanono with a returns of 1.75 per naira invested. In Bunkure, net benefit was N143,342 with returns of 1.66 per Naira invested. The mean technical efficiency was highest for the Dawakin-Tofa LGA soybean growing households (87%, followed by Bunkure LGA (68%, and Shanono LGA (59%. This result implies that given the current level of resources available to the soybean producing households, they can increase their soybean output in the short run by a margin 13%, 32% and 41% in Dawakin-Tofa, Bunkure and Shanono LGAs respectively through efficient utilization of their available resources. Farmer-specific efficiency factors, which comprise age, education, access to credit, extension contact and farming experience, were found to be the significant factors that account for the observed variation in efficiency among the farmers in the 3 LGAs. It was recommended that the soybean farmers through the assistance of extension agents should be encouraged to adhere

  8. Challenges in biobutanol production: How to improve the efficiency?

    Energy Technology Data Exchange (ETDEWEB)

    Garcia, Veronica; Paekkilae, Johanna; Muurinen, Esa; Keiski, Riitta L. [Mass and Heat Transfer Process Laboratory, Department of Process and Environmental Engineering, POB 4300, FI-90014 University of Oulu, Oulu (Finland); Ojamo, Heikki [Bioprocess Engineering Laboratory, Department of Process and Environmental Engineering, POB 4300, FI-90014 University of Oulu, Oulu (Finland)

    2011-02-15

    There is an increasing interest in the production of chemicals and fuels from renewable resources due to the continuing price increase of fossil resources, the insecurity of the availability of fossil resources in the future, and additionally environmental concerns and legislations. Biobutanol may be produced by the acetone-butanol-ethanol (ABE) fermentation. This paper reviews the biobutanol production bringing up the problems and challenges to overcome. The aim of the paper is to help in finding opportunities to make the process feasible in the near future. The analysis stresses the idea of improving the efficiency of the fermentation stage by altering the up (pretreatment of the raw material) and downstream (product recovery and purification) processes. The paper also explores the biobutanol production from the biorefinery perspective. Finally the review brings up the important role of research in developing and implementing the production of biobutanol by the ABE fermentation. (author)

  9. Challenges in biobutanol production: How to improve the efficiency?

    International Nuclear Information System (INIS)

    Garcia, Veronica; Paekkilae, Johanna; Muurinen, Esa; Keiski, Riitta L.; Ojamo, Heikki

    2011-01-01

    There is an increasing interest in the production of chemicals and fuels from renewable resources due to the continuing price increase of fossil resources, the insecurity of the availability of fossil resources in the future, and additionally environmental concerns and legislations. Biobutanol may be produced by the acetone-butanol-ethanol (ABE) fermentation. This paper reviews the biobutanol production bringing up the problems and challenges to overcome. The aim of the paper is to help in finding opportunities to make the process feasible in the near future. The analysis stresses the idea of improving the efficiency of the fermentation stage by altering the up (pretreatment of the raw material) and downstream (product recovery and purification) processes. The paper also explores the biobutanol production from the biorefinery perspective. Finally the review brings up the important role of research in developing and implementing the production of biobutanol by the ABE fermentation. (author)

  10. Resource Use Efficiency Analysis for Potato Production in Nepal

    Directory of Open Access Journals (Sweden)

    Mahesh Sapkota

    2018-05-01

    Full Text Available Potato is one of the most important staple foods supporting food security and livelihood to millions of marginalized and poor farmers in Nepal. Generally the smallholders’ farmers, especially those located in remote villages are inadequately informed about technical knowledge, inputs and efficient use of resources causing poor production and low productivity. Thus, the present survey aimed to examine the efficiency of resources used in potato production in Baglung District, one of the remote hilly place located in Central Himalaya. The total of 120 potato growing households was selected using simple random sampling technique from the two potato pocket in 2016. The regression coefficients of each inputs using Cobb-Douglas production function were estimated using Stata software. Our results showed that major inputs such as labor, bullock, Farm Yard Manure (FYM and intercultural operations were overused and need to decrease in terms of cost by 109, 177, 51 and 185%, respectively for its optimum allocation. Similarly, seed was found underused and need to increase its cost by 70% for optimum allocation. We concluded that inadequate training, exposure, knowledge gap and extension service to farmers in study sites were the reasons that farmers were using their resources inefficiently. It is recommended that the farmers involved in potato farming in the surveyed sites should be provided with additional proper technical knowledge for optimizing the use of resources which would help to increase the production and return from potato production.

  11. ECONOMIC EFFICIENCY OF DIFFERENT PROTECTION TREATMENTS IN APPLE PRODUCTION

    Directory of Open Access Journals (Sweden)

    Vesna Tomaš

    2015-06-01

    Full Text Available Apple is the most represented fruit species in Croatia. Codling moth, Cydia pomonella L, is one of the most important apple pests whose population is growing from year to year. The aim of this study was to determine the economic effectiveness of four treatments against codling moth (1 - based on baculovirus; 2 - based on the group of synthetic pyrethroid; 3 - based on kaolin, 4 - control treatment, on the three apple varieties. The experiment was performed at the Agricultural Institute Osijek, Croatia, during three years (2012-2014. In order to analyze the results of apple production it was necessary to calculate production efficiency, labor productivity, and profitability of production. The results of the research of economic efficiency according to market prices treatment 1 and treatment 2 had economic coefficient above 1 with tendency of significant growth, while treatment 3 and 4 were uneconomical. The treatment 1showed advantage over the treatment 2 because of its positive effects on human health and biodiversity, as well as satisfactory economic efficiency.

  12. Ozone decreases soybean productivity and water use efficiency

    Science.gov (United States)

    Betzelberger, A. M.; VanLoocke, A. D.; Ainsworth, E. A.; Bernacchi, C. J.

    2011-12-01

    The combination of population growth and climate change will increase pressure on agricultural and water resources throughout this century. An additional consequence of this growth is an increase in anthropogenic emissions that lead to the formation of tropospheric ozone (O3), which in concert with climate change, poses a significant threat to human health and nutrition. In addition to being an important greenhouse gas, O3 reduces plant productivity, an effect that has been particularly pronounced in soybean, which provides over half of the world's oilseed production. Plant productivity is linked to feedbacks in the climate system, indirectly through the carbon cycle, as well as directly through the partitioning of radiation into heat and moisture fluxes. Soybean, along with maize, comprises the largest ecosystem in the contiguous U.S. Therefore, changes in productivity and water use under increasing O3 could impact human nutrition as well as the regional climate. Soybean response to increasing O3 concentrations was tested under open-air agricultural conditions at the SoyFACE research site. During the 2009 growing season, eight 20 m diameter FACE plots were exposed to different O3 concentrations, ranging from 40 to 200 ppb. Canopy growth (leaf area index) and physiological measurements of leaf photosynthesis and stomatal conductance were taken regularly throughout the growing season. Canopy fluxes of heat and moisture were measured using the residual energy balance micrometeorological technique. Our results indicate that as O3 increased from 40 to 200 ppb, rates of photosynthesis and stomatal conductance decreased significantly. Further, the seed yield decreased by over 60%, while water use decreased by 30% and the water-use-efficiency (yield/water-use) declined by 50%. The growing season average canopy temperatures increased by 1°C and midday temperatures increased by 2°C compared to the control. Warmer and drier canopies may result in a positive feedback on O3

  13. Impacts of Rural Labor Resource Change on the Technical Efficiency of Crop Production in China

    Directory of Open Access Journals (Sweden)

    Ning Yin

    2017-03-01

    Full Text Available This paper probes effects of the evolvement of labor resources on technical efficiency in crop production in rural China. Based on twelve years of data on crop production of 30 provinces in China, a stochastic frontier production function model is used to measure crop production efficiency in three crop-functional areas—the production area, the consumption area, and the balanced area. Then effects of both quantity and quality change in labor force on technical efficiency in different regions of China are analyzed. Results show that rural China generally has an increasing number of employees shifted to non-agricultural sectors and a decreasing trend of the stock of human capital. However, both these two changes in rural labor force have significantly positive effects on improving crop production efficiency. In addition, China’s technical inefficiency is at an average of 22.2%. Dynamically, the technical efficiencies show a tendency to rise steadily throughout China and in three areas, while the consumption area possesses the highest technical efficiency. Those results may lend some experience for other countries that are currently experiencing rural labor force and economic transition.

  14. Considerations for higher efficiency and productivity in research activities.

    Science.gov (United States)

    Forero, Diego A; Moore, Jason H

    2016-01-01

    There are several factors that are known to affect research productivity; some of them imply the need for large financial investments and others are related to work styles. There are some articles that provide suggestions for early career scientists (PhD students and postdocs) but few publications are oriented to professors about scientific leadership. As academic mentoring might be useful at all levels of experience, in this note we suggest several key considerations for higher efficiency and productivity in academic and research activities. More research is needed into the main work style features that differentiate highly productive scientists and research groups, as some of them could be innate and others could be transferable. As funding agencies, universities and research centers invest large amounts of money in order to have a better scientific productivity, a deeper understanding of these factors will be of high academic and societal impact.

  15. New efficient hydrogen process production from organosilane hydrogen carriers derivatives

    Energy Technology Data Exchange (ETDEWEB)

    Brunel, Jean Michel [Unite URMITE, UMR 6236 CNRS, Faculte de Medecine et de Pharmacie, Universite de la Mediterranee, 27 boulevard Jean Moulin, 13385 Marseille 05 (France)

    2010-04-15

    While the source of hydrogen constitutes a significant scientific challenge, addressing issues of hydrogen storage, transport, and delivery is equally important. None of the current hydrogen storage options, liquefied or high pressure H{sub 2} gas, metal hydrides, etc.. satisfy criteria of size, costs, kinetics, and safety for use in transportation. In this context, we have discovered a methodology for the production of hydrogen on demand, in high yield, under kinetic control, from organosilane hydrogen carriers derivatives and methanol as co-reagent under mild conditions catalyzed by a cheap ammonium fluoride salt. Finally, the silicon by-products can be efficiently recycle leading to an environmentally friendly source of energy. (author)

  16. Achieving energy efficiency through product policy: the UK experience

    International Nuclear Information System (INIS)

    Boardman, Brenda

    2004-01-01

    The focus of this paper is on energy efficiency of domestic equipment. It is contended that, in the UK and--by extension--elsewhere. Government has to take the lead in defining low-energy standards for products. In the absence of policy, manufacturers do not recognize the need for carbon reductions in the equipment they design and consumers are unaware of the variation in energy performance in the product range. At present, neither market pull nor technology push can be relied upon to deliver energy savings. The imposition of a weak minimum standard on domestic fridges and freezers in 1999 will, over the lifetime of the appliances already sold by December 2002, save 1 Mt C of carbon dioxide at nil cost to government or to the manufacturers, and a net benefit to consumers of pound 855 m: a highly cost-effective policy. The difference between energy efficiency and energy conservation is that it takes time for the cumulative benefits of an energy efficiency improvement to result in the maximum effect on energy demand reduction: the benefits of the 1999 energy efficiency standard will accumulate until at least 2020. This period is equivalent to the cycle of stock replacement for that particular object. The final level of energy conservation depends upon the offsetting effects of growth in ownership levels and the size of new equipment purchases

  17. Energy sources consumption: end uses, efficiency and productivity

    International Nuclear Information System (INIS)

    Martin, J.M.

    2005-01-01

    This document analyzes the impact of the choices made by all actors, from the energy producers to the process and infrastructure designers and the end users, in the evolution of energy consumptions. Some very little improvements made in the energy efficiency of appliances can become equivalent to the production of several oil fields or power plants at the world scale. More efficient energy uses will not replace the additional productions but they must be considered together to be compared. The energy files are first analyzed as a whole in order to show the hidden field of energy choices. In this framework, users, designers and fitters have to face very different choices because they consider efficiency improvements under different aspects: scientifical, technical, economical and social (public information and habits). These differences in efficiency uses have a time and spatial impact on the growth of energy consumption. The economical and social factors influence the collective way to consume energy and are expressed by the energy intensity of the economic activity. The last part of this document analyzes the influence of this notion on the world energy consumption scenarios at the 2050 prospects. (J.S.)

  18. Productivity, Efficiency, and Competitiveness of Small-Scale Organic Cotton Production in Tanzania

    DEFF Research Database (Denmark)

    Mgeni, Dotto; Henningsen, Arne

    cannot be adjusted in the short run. However, land, labor, and organic fertilizer can neither be traded on a perfect market nor are their quantities completely fixed for cotton production, but these input quantities can be adjusted by adjusting their use for other activities of the household. Hence......Cotton is known as the “white gold” of Africa since it is the only export crop in which the continent’s share in the world market has increased over the past decades. Total cotton production as well as productivity grew particularly in Western and Central Africa. In contrast, cotton production grew...... and output, as well as socio-economic and agronomic factors, but also on the shadow prices of all sparsely traded inputs, i.e. land, labor, and organic fertilizer. Hence, we can not only analyze productivity, technical efficiency, and scale efficiency, but also allocative efficiency, profitability...

  19. Electronic medical records and efficiency and productivity during office visits.

    Science.gov (United States)

    Furukawa, Michael F

    2011-04-01

    To estimate the relationship between electronic medical record (EMR) use and efficiency of utilization and provider productivity during visits to US office-based physicians. Cross-sectional analysis of the 2006-2007 National Ambulatory Medical Care Survey. The sample included 62,710 patient visits to 2625 physicians. EMR systems included demographics, clinical notes, prescription orders, and laboratory and imaging results. Efficiency was measured as utilization of examinations, laboratory tests, radiology procedures, health education, nonmedication treatments, and medications. Productivity was measured as total services provided per 20-minute period. Survey-weighted regressions estimated association of EMR use with services provided, visit intensity/duration, and productivity. Marginal effects were estimated by averaging across all visits and by major reason for visit. EMR use was associated with higher probability of any examination (7.7%, 95% confidence interval [CI] = 2.4%, 13.1%); any laboratory test (5.7%, 95% CI = 2.6%, 8.8%); any health education (4.9%, 95% CI = 0.2%, 9.6%); and fewer laboratory tests (-7.1%, 95% CI = -14.2%, -0.1%). During pre/post surgery visits, EMR use was associated with 7.3% (95% CI= -12.9%, -1.8%) fewer radiology procedures. EMR use was not associated with utilization of nonmedication treatments and medications, or visit duration. During routine visits for a chronic problem, EMR use was associated with 11.2% (95% CI = 5.7%, 16.8%) more diagnostic/screening services provided per 20-minute period. EMR use had a mixed association with efficiency and productivity during office visits. EMRs may improve provider productivity, especially during visits for a new problem and routine chronic care.

  20. Production System of Peranakan Etawah Goat under Application of Feed Technology: Productivity and Economic Efficiency

    Directory of Open Access Journals (Sweden)

    Akhmad Sodiq

    2009-09-01

    Full Text Available Feed resources are the major constraint in increasing goat production in the village. The main constraints to goat raising are related to feeds (i the high cost of transport of crop residues and grass to the homesteads, (ii the low nutritive value of feeds used, particularly in the dry period. This research was design to evaluate goat productivity and economic efficiency of goat farming under application of feed technology production system in Peranakan Etawah goat farmer group of Gumelar Banyumas Central Java. All farmers were taken as respondents using census methods. On farm research with participative focused group discussion, indepth interview, and farm observation. Descriptive analysis and independent t test methods were used to analyze the data. Results of this study showed that there was a significant improvement goat productivity on production system with the application of feed technology. Body weight at weaning, survival rate till weaning, and doe productivity were increased 7%, 2% and 5%, respectively. There was no evidence of significant different of farmers income and economic efficiency before and after the applied feed technology (P>0.05. The calculation was based on cash flow. Before application, farmers income per year and economic efficiency were Rp14.404.520,00 and 1.21, then insignificantly improve into Rp16.487.100,00 and 1.27, respectively. (Animal Production 11(3: 202-208 (2009 Key Words: Livestock production system, Peranakan Etawah goat, feed technology aplication, productivity and economic efficiency

  1. Recommended Ventilation Strategies for Energy-Efficient Production Homes

    Energy Technology Data Exchange (ETDEWEB)

    Roberson, J.; Brown, R.; Koomey, J.; Warner, J.; Greenberg, S.

    1998-12-01

    This report evaluates residential ventilation systems for the U.S. Environmental Protection Agency's (EPA's) ENERGY STAR{reg_sign} Homes program and recommends mechanical ventilation strategies for new, low-infiltration, energy-efficient, single-family, ENERGY STAR production (site-built tract) homes in four climates: cold, mixed (cold and hot), hot humid, and hot arid. Our group in the Energy Analysis Department at Lawrence Berkeley National Lab compared residential ventilation strategies in four climates according to three criteria: total annualized costs (the sum of annualized capital cost and annual operating cost), predominant indoor pressure induced by the ventilation system, and distribution of ventilation air within the home. The mechanical ventilation systems modeled deliver 0.35 air changes per hour continuously, regardless of actual infiltration or occupant window-opening behavior. Based on the assumptions and analysis described in this report, we recommend independently ducted multi-port supply ventilation in all climates except cold because this strategy provides the safety and health benefits of positive indoor pressure as well as the ability to dehumidify and filter ventilation air. In cold climates, we recommend that multi-port supply ventilation be balanced by a single-port exhaust ventilation fan, and that builders offer balanced heat-recovery ventilation to buyers as an optional upgrade. For builders who continue to install forced-air integrated supply ventilation, we recommend ensuring ducts are airtight or in conditioned space, installing a control that automatically operates the forced-air fan 15-20 minutes during each hour that the fan does not operate for heating or cooling, and offering ICM forced-air fans to home buyers as an upgrade.

  2. European oil product supply modelling

    International Nuclear Information System (INIS)

    Saint-Antonin, V.

    1998-01-01

    Over the last few years, trends in European oil product consumption (in terms of level as structure and quality) has important implications of the refining industry. In this context, the purpose of this thesis consists in building a mathematical programming model applied to the European refineries in order to determine oil product supply prices, European refining industry investments and oil product exchanges of the European Union. The first part presents the reason for our choice for a long-term aggregate multi-refineries linear programming model, based on European refineries characteristics and the objectives of our model. Its dual properties are studied in detail and we focus particularly on the European exchange modelling. In the second part, an analysis of the European refining trends leads us to identify parameters and variables of the model that are essential to the aggregate representation of the European oil product supply. The third part is devoted to the use of this model, regarding two scenarios of increasingly stringent specifications for gasoline and diesel oil. Our interest for these products is due to their important share of the European oil product consumption and the not insignificant responsibility of the transport sector for atmospheric pollution. Finally, in order to have the use of an overall picture of the European refining industry, we build a regression model summarizing, though a few equations, the main relations between the major endogenous and exogenous variables o the LP model. Based on pseudo-data, this kind of model provides a simple and robust representation of the oil product supply. But a more specialized analysis of the refining industry operations, turning on a technical assessment of processing units, is reliant on the use of an optimization model such as the model we have built. (author)

  3. Efficient recombinant production of prodigiosin in Pseudomonas putida

    Directory of Open Access Journals (Sweden)

    Andreas eDomröse

    2015-09-01

    Full Text Available Serratia marcescens and several other bacteria produce the red-colored pigment prodigiosin which possesses bioactivities as an antimicrobial, anticancer and immunosuppressive agent. Therefore, there is a great interest to produce this natural compound. Efforts aiming at its biotechnological production have so far largely focused on the original producer and opportunistic human pathogen S. marcescens. Here, we demonstrate efficient prodigiosin production in the heterologous host Pseudomonas putida. Random chromosomal integration of the 21 kb prodigiosin biosynthesis gene cluster of S. marcescens in P. putida KT2440 was employed to construct constitutive prodigiosin production strains. Standard cultivation parameters were optimized such that titers of 94 mg/L culture were obtained upon growth of P. putida at 20 °C using rich medium under high aeration conditions. Subsequently, a novel, fast and effective protocol for prodigiosin extraction and purification was established enabling the straightforward isolation of prodigiosin from P. putida growth medium. In summary, we describe here a highly efficient method for the heterologous biosynthetic production of prodigiosin which may serve as a basis to produce large amounts of this bioactive natural compound and may provide a platform for further in-depth studies of prodiginine biosynthesis.

  4. Production and efficiency of organic compost generated by millipede activity

    Directory of Open Access Journals (Sweden)

    Luiz Fernando de Sousa Antunes

    2016-05-01

    Full Text Available ABSTRACT: The putrefactive activity of organisms such as diplopods in the edaphic macrof auna can be leveraged to promote the transformation of agricultural and urban waste into a low-cost substrate for the production of vegetable seedlings. This research aimed to evaluate: (1 the quantity of Gervais millipedes ( Trigoniulus corallinus needed to produce an acceptable quantity of organic compost; (2 the main physical and chemical characteristics of different compost types; and (3 compost efficiency in the production of lettuce seedlings. The first experiment lasted 90 days and was conducted using 6.5L of Gliricidia, 6.5L of Flemingia, 13.5L of grass cuttings, 4.5L of cardboard, 4.5L of coconut husk, and 4.5L of corncob. Treatments consisting of 0, 0.10, 0.30, 0.50, and 0.90L of millipedes were applied. This experiment compared millicompost and vermicompost, using four repetitions. After 23 days, the heights of grown lettuce plants and the weights of the fresh and dry mass of above ground lettuce and of the roots were assessed. A millipede volume of 0.1L proved to be sufficient for the production of an acceptable volume of organic compost. However, the addition of greater volumes leads to increased calcium, magnesium, and phosphorous content. Millicompost has similar physicochemical characteristics those of vermicompost, and both are equally efficient as a substrate for the production of lettuce seedlings.

  5. Efficient 3D scene modeling and mosaicing

    CERN Document Server

    Nicosevici, Tudor

    2013-01-01

    This book proposes a complete pipeline for monocular (single camera) based 3D mapping of terrestrial and underwater environments. The aim is to provide a solution to large-scale scene modeling that is both accurate and efficient. To this end, we have developed a novel Structure from Motion algorithm that increases mapping accuracy by registering camera views directly with the maps. The camera registration uses a dual approach that adapts to the type of environment being mapped.   In order to further increase the accuracy of the resulting maps, a new method is presented, allowing detection of images corresponding to the same scene region (crossovers). Crossovers then used in conjunction with global alignment methods in order to highly reduce estimation errors, especially when mapping large areas. Our method is based on Visual Bag of Words paradigm (BoW), offering a more efficient and simpler solution by eliminating the training stage, generally required by state of the art BoW algorithms.   Also, towards dev...

  6. Health resource allocation and productive efficiency of Chinese county hospitals: data from 1993 to 2005.

    Science.gov (United States)

    Gai, Ruoyan Y; Zhou, Chengchao C; Xu, Lingzhong Z; Zhu, Min; Wang, Xingzhou Z; Li, Shixue X; Zheng, Wengui G; Song, Peipei P; Yang, Xuelai L; Fang, Liyi Y; Zhen, Yancheng C; Tang, Wei

    2010-10-01

    This study aims to assess trends in the productive efficiency of China's county hospitals during the economic transition using data from 1993 to 2005. A data envelopment analysis (DEA) framework was used to calculate the efficiency score of county hospitals in all 31 provinces. A C²R model and a BC² model were devised to respectively calculate overall and scale efficiency and pure technical efficiency at the hospital's current scale. Models included four inputs (number of medical staff; number of beds; value of fixed capital; and hospital expenditures) and three outputs (outpatient and emergency visits, number of inpatients, and hospital revenue) in total. As the results, geographical disparities in health resource allocation and county hospital productivity were noted. From 1993 to 2005, the number of county hospitals increased and their inputs, e.g. fixed capital in particular, grew rapidly. However, the amount of both outpatient and inpatient services declined somewhat especially in the middle and the western regions. The overall efficiency at the national level decreased slightly. County hospitals in the eastern region tended to have better overall, scale, and technical efficiency in comparison to the middle and the western regions. In conclusion, county hospitals are inefficient due to their enlarged scale and the reduced amount of health care services they provide. This issue should be addressed especially in the middle and the western regions, where health resources are far more limited and yet wasted. The effects of ongoing health sector reform on the productivity of county hospitals must be monitored and evaluated.

  7. Geometrical model of multiple production

    International Nuclear Information System (INIS)

    Chikovani, Z.E.; Jenkovszky, L.L.; Kvaratshelia, T.M.; Struminskij, B.V.

    1988-01-01

    The relation between geometrical and KNO-scaling and their violation is studied in a geometrical model of multiple production of hadrons. Predictions concerning the behaviour of correlation coefficients at future accelerators are given

  8. High efficiency power production from biomass and waste

    Energy Technology Data Exchange (ETDEWEB)

    Rabou, L.P.L.M.; Van Leijenhorst, R.J.C.; Hazewinkel, J.H.O. [ECN Biomass, Coal and Environment, Petten (Netherlands)

    2008-11-15

    Two-stage gasification allows power production from biomass and waste with high efficiency. The process involves pyrolysis at about 550C followed by heating of the pyrolysis gas to about 1300C in order to crack hydrocarbons and obtain syngas, a mixture of H2, CO, H2O and CO2. The second stage produces soot as unwanted by-product. Experimental results are reported on the suppression of soot formation in the second stage for two different fuels: beech wood pellets and Rofire pellets, made from rejects of paper recycling. Syngas obtained from these two fuels and from an industrial waste fuel has been cleaned and fed to a commercial SOFC stack for 250 hours in total. The SOFC stack showed comparable performance on real and synthetic syngas and no signs of accelerated degradation in performance over these tests. The experimental results have been used for the design and analysis of a future 25 MWth demonstration plant. As an alternative, a 2.6 MWth system was considered which uses the Green MoDem approach to convert waste fuel into bio-oil and syngas. The 25 MWth system can reach high efficiency only if char produced in the pyrolysis step is converted into additional syngas by steam gasification, and if SOFC off-gas and system waste heat are used in a steam bottoming cycle for additional power production. A net electrical efficiency of 38% is predicted. In addition, heat can be delivered with 37% efficiency. The 2.6 MWth system with only a dual fuel engine to burn bio-oil and syngas promises nearly 40% electrical efficiency plus 41% efficiency for heat production. If syngas is fed to an SOFC system and off-gas and bio-oil to a dual fuel engine, the electrical efficiency can rise to 45%. However, the efficiency for heat production drops to 15%, as waste heat from the SOFC system cannot be used effectively. The economic analysis makes clear that at -20 euro/tonne fuel, 70 euro/MWh for electricity and 7 euro/GJ for heat the 25 MWth system is not economically viable at the

  9. Efficient production of long-lived ultracold Sr2 molecules

    Science.gov (United States)

    Ciamei, Alessio; Bayerle, Alex; Chen, Chun-Chia; Pasquiou, Benjamin; Schreck, Florian

    2017-07-01

    We associate Sr atom pairs on sites of a Mott insulator optically and coherently into weakly bound ground-state molecules, achieving an efficiency above 80%. This efficiency is 2.5 times higher than in our previous work [S. Stellmer, B. Pasquiou, R. Grimm, and F. Schreck, Phys. Rev. Lett. 109, 115302 (2012), 10.1103/PhysRevLett.109.115302] and obtained through two improvements. First, the lifetime of the molecules is increased beyond one minute by using an optical lattice wavelength that is further detuned from molecular transitions. Second, we compensate undesired dynamic light shifts that occur during the stimulated Raman adiabatic passage (STIRAP) used for molecule association. We also characterize and model STIRAP, providing insights into its limitations. Our work shows that significant molecule association efficiencies can be achieved even for atomic species or mixtures that lack Feshbach resonances suitable for magnetoassociation.

  10. Temperature dependent fission product removal efficiency due to pool scrubbing

    Energy Technology Data Exchange (ETDEWEB)

    Uchida, Shunsuke, E-mail: suchida@iae.or.jp [Institute of Applied Energy, 1-14-2, Nishi-Shimbashi, Minato-ku, Tokyo 105-0003 (Japan); Itoh, Ayumi; Naitoh, Masanori; Okada, Hidetoshi; Suzuki, Hiroyuki [Institute of Applied Energy, 1-14-2, Nishi-Shimbashi, Minato-ku, Tokyo 105-0003 (Japan); Hanamoto, Yukio [KAKEN, Inc., 1044, Hori-machi, Mito 310-0903 (Japan); Osakabe, Masahiro [Tokyo University of Marine Science & Technology, Koutou-ku, Tokyo 135-8533 (Japan); Fujikawa, Masahiro [Japan Broadcasting Corporation, 2-2-1, Jinnan, Shibuya-ku, Tokyo 150-8001 (Japan)

    2016-03-15

    Highlights: • Pool temperature effects on the FP removal were not clearly concluded in the previous publications. • It was confirmed that the removal efficiency decreased with temperature around the boiling point. • A modified empirical formula for FP removal was proposed as a function of sub-cooling temperature. • DF could be predicted with an accuracy within a factor of 2 with the proposed formula. - Abstract: The wet-well of boiling water reactors plays important roles not only to suppress the pressure in the primary containment vessel due to steam scrubbing effects during severe accidents but also to mitigate release of radioactive fission products (FP), aerosols and particulates, into the environment. The effects of steam scrubbing in the wet-well on FP removal have been well studied and reported by changing major parameters determining the removal efficiencies, e.g., aerosol diameters, submergence (depth of scrubbing nozzles) and steam/non-condensable gas volume fraction. Unfortunately, the effects of pool temperature on the FP removal were not clearly concluded in the previous publications, though it would be easily expected that boiling in the pool resulted in reduced aerosol removal efficiency. In order to determine the temperature effects on FP removal efficiency, amounts of cesium in aerosols released from scrubbing pool were measured by changing pool temperature in mini and medium scale scrubbing experiments, and then, it was confirmed that the removal efficiency clearly decreased with temperature around the boiling point. Then, a modified empirical formula to express the FP removal around the boiling point temperature was proposed as a function of sub-cooling temperature by applying the effective steam volume fraction, which was designated as the volume ratio of condensed steam in the pool versus the sum of input steam and non-condensable gas. By comparing the measured removal efficiency with the calculated, it was validated that the

  11. Temperature dependent fission product removal efficiency due to pool scrubbing

    International Nuclear Information System (INIS)

    Uchida, Shunsuke; Itoh, Ayumi; Naitoh, Masanori; Okada, Hidetoshi; Suzuki, Hiroyuki; Hanamoto, Yukio; Osakabe, Masahiro; Fujikawa, Masahiro

    2016-01-01

    Highlights: • Pool temperature effects on the FP removal were not clearly concluded in the previous publications. • It was confirmed that the removal efficiency decreased with temperature around the boiling point. • A modified empirical formula for FP removal was proposed as a function of sub-cooling temperature. • DF could be predicted with an accuracy within a factor of 2 with the proposed formula. - Abstract: The wet-well of boiling water reactors plays important roles not only to suppress the pressure in the primary containment vessel due to steam scrubbing effects during severe accidents but also to mitigate release of radioactive fission products (FP), aerosols and particulates, into the environment. The effects of steam scrubbing in the wet-well on FP removal have been well studied and reported by changing major parameters determining the removal efficiencies, e.g., aerosol diameters, submergence (depth of scrubbing nozzles) and steam/non-condensable gas volume fraction. Unfortunately, the effects of pool temperature on the FP removal were not clearly concluded in the previous publications, though it would be easily expected that boiling in the pool resulted in reduced aerosol removal efficiency. In order to determine the temperature effects on FP removal efficiency, amounts of cesium in aerosols released from scrubbing pool were measured by changing pool temperature in mini and medium scale scrubbing experiments, and then, it was confirmed that the removal efficiency clearly decreased with temperature around the boiling point. Then, a modified empirical formula to express the FP removal around the boiling point temperature was proposed as a function of sub-cooling temperature by applying the effective steam volume fraction, which was designated as the volume ratio of condensed steam in the pool versus the sum of input steam and non-condensable gas. By comparing the measured removal efficiency with the calculated, it was validated that the

  12. Thermodynamic analysis of the efficiency of high-temperature steam electrolysis system for hydrogen production

    Science.gov (United States)

    Mingyi, Liu; Bo, Yu; Jingming, Xu; Jing, Chen

    High-temperature steam electrolysis (HTSE), a reversible process of solid oxide fuel cell (SOFC) in principle, is a promising method for highly efficient large-scale hydrogen production. In our study, the overall efficiency of the HTSE system was calculated through electrochemical and thermodynamic analysis. A thermodynamic model in regards to the efficiency of the HTSE system was established and the quantitative effects of three key parameters, electrical efficiency (η el), electrolysis efficiency (η es), and thermal efficiency (η th) on the overall efficiency (η overall) of the HTSE system were investigated. Results showed that the contribution of η el, η es, η th to the overall efficiency were about 70%, 22%, and 8%, respectively. As temperatures increased from 500 °C to 1000 °C, the effect of η el on η overall decreased gradually and the η es effect remained almost constant, while the η th effect increased gradually. The overall efficiency of the high-temperature gas-cooled reactor (HTGR) coupled with the HTSE system under different conditions was also calculated. With the increase of electrical, electrolysis, and thermal efficiency, the overall efficiencies were anticipated to increase from 33% to a maximum of 59% at 1000 °C, which is over two times higher than that of the conventional alkaline water electrolysis.

  13. Can Differentiated Production Planning and Control enable both Responsiveness and Efficiency in Food Production?

    Directory of Open Access Journals (Sweden)

    Anita Romsdal

    2014-07-01

    Full Text Available This paper addresses the complex production planning and control (PPC challenges in food supply chains. The study illustrates how food producers' traditional make‐to‐stock (MTS approach is not well suited to meet the trends of increasing product variety, higher demand uncertainty, increasing sales of fresh food products and more demanding customers. The paper proposes a framework for differentiated PPC that combines MTS with make‐to‐order (MTO.The framework matches products with the most appropriate PPC approaches and buffering techniques depending on market and product characteristics. The core idea is to achieve more volume flexibility in the production system by exploiting favourable product and market characteristics (high demand predictability, long customer order leadtime allowances and low product perishability. A case study is used to demonstrate how the framework can enable food producers to achieve efficiency in production, inventory and PPC processes – and simultaneously be responsive to market requirements.

  14. Economic Efficiency of Establishing Domestic Production of Synthetic Liquid Fuel

    Directory of Open Access Journals (Sweden)

    Kyzym Mykola O.

    2017-06-01

    Full Text Available The article notes a stable tendency to increasing the oil dependence of Ukraine, which creates a threat to the national economic security, and proves an expediency of establishing domestic production of synthetic liquid fuel. The technical, organizational and economic features of establishing synthetic liquid fuel production in Ukraine are presented. There proved a hypothesis on the expediency of organizing the production of synthetic liquid fuels based on steam-plasma coal gasification technology. The forecast resource cycle of the country until 2020 under conditions of developing this technology is modeled.

  15. Efficient production of automotive biofuels; Effektiv produktion av biodrivmedel

    Energy Technology Data Exchange (ETDEWEB)

    Gode, Jenny; Hagberg, Linus; Rydberg, Tomas; Raadberg, Henrik; Saernholm, Erik

    2008-07-01

    , production of fatty acid methyl ester (FAME), pellets production and in some cases treatment with hydrogen gas, catalytic depolymerisation and anaerobic digestion can increase the use of steam and heat from district heating. This new 'offset' for heat can increase operational hours for the CHP. Conversely, biomass gasification produces a greater proportion of the necessary process energy internally and the waste heat produced in the process leads to a lower load for heat production in the CHP. These conclusions are illustrated in the form of a diagram of heat output distribution, both for the hypothetical polygeneration plant of ethanol production and for the hypothetical biomass gasification polygeneration plant with production of synthetic natural gas. The calculations are based on a district heating network where the heat is produced from a biofuel driven CHP (89 MW{sub e}, 173 MW{sub heat} and 230 MW{sub fuel}) and a biofuel driven HP. Since the prerequisites for each specific polygeneration plant are different, the effect of integrations in reality would differ from the results of these calculations--but the results give an overview of the consequences of the choice of energy polygeneration plant. Several interesting combinations in the form of biofuel polygeneration plants are already in operation or in the planning stage. Several conceivable alternatives are: - Ethanol production, anaerobic digestion/feed production, heat and power. - Ethanol production, pellets production, greenhouse, heat and power. - Gasification including fuel production, district heating network and pellets production. - Oilseed rape production, RME production, heat and power. - NExBTL production, refinery, district heating network/heat and power. In most cases the overall efficiency of biofuel production is lower than if biomass is used directly in heat and power production as shown in the system analysis. This is, however, in conflict with the increasing demand for biofuels. A biomass

  16. Biomass production efficiency controlled by management in temperate and boreal ecosystems

    NARCIS (Netherlands)

    Campioli, M.; Vicca, S.; Luyssaert, S.; Bilcke, J.; Ceschia, E.; Chapin, F.S. III; Ciais, P.; Fernández-Martínez, M.; Malhi, Y.; Obersteiner, M.; Olefeldt, D.; Papale, D.; Piao, S.L.; Peñuelas, J.; Sullivan, P. F.; Wang, X.; Zenone, T.; Janssens, I.A.

    2015-01-01

    Plants acquire carbon through photosynthesis to sustain biomass production, autotrophic respiration and production of non-structural compounds for multiple purposes. The fraction of photosynthetic production used for biomass production, the biomass production efficiency, is a key determinant of the

  17. Service Co-Production, Customer Efficiency and Market Competition

    OpenAIRE

    Mei Xue; Patrick T. Harker

    2003-01-01

    Customers’ participation in service co-production processes has been increasing with the rapid development of self-service technologies and business models that rely on self-service as the main service delivery channel. However, little is known about how the level of participation of customers in service delivery processes influences the competition among service providers. In this paper, a game-theoretic model is developed to study the competition among service providers when selfservice is ...

  18. Improved energy efficiency in juice production through waste heat recycling

    International Nuclear Information System (INIS)

    Anderson, J.-O.; Elfgren, E.; Westerlund, L.

    2014-01-01

    Highlights: • A heating system at a juice production was investigated and improved. • Different impacts of drying cycle improvements at the energy usage were explored. • The total heat use for drying could thereby be decreased with 52%. • The results point out a significant decrease of heat consumption with low investment costs. - Abstract: Berry juice concentrate is produced by pressing berries and heating up the juice. The by-products are berry skins and seeds in a press cake. Traditionally, these by-products have been composted, but due to their valuable nutrients, it could be profitable to sell them instead. The skins and seeds need to be separated and dried to a moisture content of less than 10 %wt (on dry basis) in order to avoid fermentation. A berry juice plant in the north of Sweden has been studied in order to increase the energy and resource efficiency, with special focus on the drying system. This was done by means of process integration with mass and energy balance, theory from thermodynamics and psychrometry along with measurements of the juice plant. Our study indicates that the drying system could be operated at full capacity without any external heat supply using waste heat supplied from the juice plant. This would be achieved by increasing the efficiency of the dryer by recirculation of the drying air and by heat supply from the flue gases of the industrial boiler. The recirculation would decrease the need of heat in the dryer with about 52%. The total heat use for the plant could thereby be decreased from 1262 kW to 1145 kW. The improvements could be done without compromising the production quality

  19. Analysis the Efficiency and Productivity of Indonesian Pharmaceutical Public Companies Using Data Envelopment Analysis

    Directory of Open Access Journals (Sweden)

    Dewi Hanggraeni

    2014-08-01

    Full Text Available As one of the biggest medicines market in the South East Asia, the pharmaceutical industry inIndonesia has a huge potential market. However, the majority supply of raw materials has been imported.Besides, regulations of the Health Ministry and the Trade Ministry have still hampered mostplayers in Indonesia pharmaceutical industry. Therefore, this study used Data Envelopment Analysis(DEA models to analyze efficiency and productivity change in the Indonesian pharmaceutical industrybetween 2006 and 2011, listed in the Indonesia Stock Exchange and also supported by applyingefficiency financial ratio. This study finds that the decision for the most relatively efficient companyis different using DEA compared to efficiency financial ratios, yet DEA has better measurement ofefficiency. It is proven by one of State-owned Enterprises has been evaluated underperformed by thefinancial ratio analysis, unexpectedly is efficient using the DEA approach. This study has also proposedand tested a hypothesis on the average efficiency to check if the domestic and foreign pharmaceuticalcompanies differ in their efficiency but the result implies that there is no significant statisticaldifference among them. This study indicates that firms having dominant contribution in selling overthe-counter medicines are more efficient than selling ethical medicines. Lastly, technological changecontribution has more influence to productivity change instead of pure technical efficiency change inIndonesia pharmaceutical companies.

  20. Breed of cow and herd productivity affect milk nutrient recovery in curd, and cheese yield, efficiency and daily production.

    Science.gov (United States)

    Stocco, G; Cipolat-Gotet, C; Gasparotto, V; Cecchinato, A; Bittante, G

    2018-02-01

    Little is known about cheese-making efficiency at the individual cow level, so our objective was to study the effects of herd productivity, individual herd within productivity class and breed of cow within herd by producing, then analyzing, 508 model cheeses from the milk of 508 cows of six different breeds reared in 41 multi-breed herds classified into two productivity classes (high v. low). For each cow we obtained six milk composition traits; four milk nutrient (fat, protein, solids and energy) recovery traits (REC) in curd; three actual % cheese yield traits (%CY); two theoretical %CYs (fresh cheese and cheese solids) calculated from milk composition; two overall cheese-making efficiencies (% ratio of actual to theoretical %CYs); daily milk yield (dMY); and three actual daily cheese yield traits (dCY). The aforementioned phenotypes were analyzed using a mixed model which included the fixed effects of herd productivity, parity, days in milk (DIM) and breed; the random effects were the water bath, vat, herd and residual. Cows reared in high-productivity herds yielded more milk with higher nutrient contents and more cheese per day, had greater theoretical %CY, and lower cheese-making efficiency than low-productivity herds, but there were no differences between them in terms of REC traits. Individual herd within productivity class was an intermediate source of total variation in REC, %CY and efficiency traits (10.0% to 17.2%), and a major source of variation in milk yield and dCY traits (43.1% to 46.3%). Parity of cows was an important source of variation for productivity traits, whereas DIM affected almost all traits. Breed within herd greatly affected all traits. Holsteins produced more milk, but Brown Swiss cows produced milk with higher actual and theoretical %CYs and cheese-making efficiency, so that the two large-framed breeds had the same dCY. Compared with the two large-framed breeds, the small Jersey cows produced much less milk, but with greater actual

  1. Efficiency and productivity assessment of public hospitals in Greece during the crisis period 2009-2012.

    Science.gov (United States)

    Xenos, P; Yfantopoulos, J; Nektarios, M; Polyzos, N; Tinios, P; Constantopoulos, A

    2017-01-01

    This study is an initial effort to examine the dynamics of efficiency and productivity in Greek public hospitals during the first phase of the crisis 2009-2012. Data were collected by the Ministry of Health after several quality controls ensuring comparability and validity of hospital inputs and outputs. Productivity is estimated using the Malmquist Indicator, decomposing the estimated values into efficiency and technological change. Hospital efficiency and productivity growth are calculated by bootstrapping the non-parametric Malmquist analysis. The advantage of this method is the estimation efficiency and productivity through the corresponding confidence intervals. Additionally, a Random-effects Tobit model is explored to investigate the impact of contextual factors on the magnitude of efficiency. Findings reveal substantial variations in hospital productivity over the period from 2009 to 2012. The economic crisis of 2009 had a negative impact in productivity. The average Malmquist Productivity Indicator (MPI) score is 0.72 with unity signifying stable production. Approximately 91% of the hospitals score lower than unity. Substantial increase is observed between 2010 and 2011, as indicated by the average MPI score which fluctuates to 1.52. Moreover, technology change scored more than unity in more than 75% of hospitals. The last period (2011-2012) has shown stabilization in the expansionary process of productivity. The main factors contributing to overall productivity gains are increases in occupancy rates, type and size of the hospital. This paper attempts to offer insights in efficiency and productivity growth for public hospitals in Greece. The results suggest that the average hospital experienced substantial productivity growth between 2009 and 2012 as indicated by variations in MPI. Almost all of the productivity increase was due to technology change which could be explained by the concurrent managerial and financing healthcare reforms. Hospitals operating

  2. Tool Efficiency Analysis model research in SEMI industry

    Directory of Open Access Journals (Sweden)

    Lei Ma

    2018-01-01

    Full Text Available One of the key goals in SEMI industry is to improve equipment through put and ensure equipment production efficiency maximization. This paper is based on SEMI standards in semiconductor equipment control, defines the transaction rules between different tool states,and presents a TEA system model which is to analysis tool performance automatically based on finite state machine. The system was applied to fab tools and verified its effectiveness successfully, and obtained the parameter values used to measure the equipment performance, also including the advices of improvement.

  3. Crop productivities and radiation use efficiencies for bioregenerative life support

    Science.gov (United States)

    Wheeler, R. M.; Mackowiak, C. L.; Stutte, G. W.; Yorio, N. C.; Ruffe, L. M.; Sager, J. C.; Prince, R. P.; Knott, W. M.

    NASA’s Biomass Production Chamber (BPC) at Kennedy Space Center was decommissioned in 1998, but several crop tests were conducted that have not been reported in the open literature. These include several monoculture studies with wheat, soybean, potato, lettuce, and tomato. For all of these studies, either 10 or 20 m2 of plants were grown in an atmospherically closed chamber (113 m3 vol.) using a hydroponic nutrient film technique along with elevated CO2 (1000 or 1200 μmol mol-1). Canopy light (PAR) levels ranged from 17 to 85 mol m-2 d-1 depending on the species and photoperiod. Total biomass (DM) productivities reached 39.6 g m-2 d-1 for wheat, 27.2 g m-2 d-1 for potato, 19.6 g m-2 d-1 for tomato, 15.7 g m-2 d-1 for soybean, and 7.7 g m-2 d-1 for lettuce. Edible biomass (DM) productivities reached 18.4 g m-2 d-1 for potato, 11.3 g m-2 d-1 for wheat, 9.8 g m-2 d-1 for tomato, 7.1 g m-2 d-1 for lettuce, and 6.0 g m-2 d-1 for soybean. The corresponding radiation (light) use efficiencies for total biomass were 0.64 g mol-1 PAR for potato, 0.59 g DM mol-1 for wheat, 0.51 g mol-1 for tomato, 0.46 g mol-1 for lettuce, and 0.43 g mol-1 for soybean. Radiation use efficiencies for edible biomass were 0.44 g mol-1 for potato, 0.42 g mol-1 for lettuce, 0.25 g mol-1 for tomato, 0.17 g DM mol-1 for wheat, and 0.16 g mol-1 for soybean. By initially growing seedlings at a dense spacing and then transplanting them to the final production area could have saved about 12 d in each production cycle, and hence improved edible biomass productivities and radiation use efficiencies by 66% for lettuce (to 11.8 g m-2 d-1 and 0.70 g mol-1), 16% for tomato (to 11.4 g m-2 d-1and 0.29 g mol-1), 13% for soybean (to 6.9 g m-2 d-1 and 0.19 g mol-1), and 13% for potato (to 20.8 g m-2 d-1 and 0.50 g mol-1). Since wheat was grown at higher densities, transplanting seedlings would not have improved yields. Tests with wheat resulted in a relatively low harvest index of 29%, which may have been

  4. Energy Efficiency Model for Induction Furnace

    Science.gov (United States)

    Dey, Asit Kr

    2018-01-01

    In this paper, a system of a solar induction furnace unit was design to find out a new solution for the existing AC power consuming heating process through Supervisory control and data acquisition system. This unit can be connected directly to the DC system without any internal conversion inside the device. The performance of the new system solution is compared with the existing one in terms of power consumption and losses. This work also investigated energy save, system improvement, process control model in a foundry induction furnace heating framework corresponding to PV solar power supply. The results are analysed for long run in terms of saving energy and integrated process system. The data acquisition system base solar foundry plant is an extremely multifaceted system that can be run over an almost innumerable range of operating conditions, each characterized by specific energy consumption. Determining ideal operating conditions is a key challenge that requires the involvement of the latest automation technologies, each one contributing to allow not only the acquisition, processing, storage, retrieval and visualization of data, but also the implementation of automatic control strategies that can expand the achievement envelope in terms of melting process, safety and energy efficiency.

  5. DEPENDENCE OF ENERGY EFFICIENCY AND COST OF PRODUCTION

    Directory of Open Access Journals (Sweden)

    D. Sklyarov

    2016-01-01

    Full Text Available Economic systems exist on condition of receipt and spending of energy. Energy consumption is a necessary condition for the existence and functioning of the economic systems of any scale: macroeconomics, microeconomics, regional economy or the world economy.The economic system operates on the scale at which it is able to produce energy and get access to energy. Moreover, receipt and consumption of energy in the operation of the economic system is mainly determined by, the level of energy production from energy sources, since this level is determined by the level of energy consumption by industries and enterprises of the economy.Currently, the economic system does not produce energy in reserve. Thus, the question of energy effi ciency and energy saving was always acute.The article describes the energy efficiency and energy saving effect on the cost of production. Were used two methods: “costs and release” matrix and “price - value added” matrix. The result is the equation of dependence of energy efficiency and costs.

  6. Productivity and technical efficiency of suckler beef production systems: trends for the period 1990 to 2012.

    Science.gov (United States)

    Veysset, P; Lherm, M; Roulenc, M; Troquier, C; Bébin, D

    2015-12-01

    Over the past 23 years (1990 to 2012), French beef cattle farms have expanded in size and increased labour productivity by over 60%, chiefly, though not exclusively, through capital intensification (labour-capital substitution) and simplifying herd feeding practices (more concentrates used). The technical efficiency of beef sector production systems, as measured by the ratio of the volume value (in constant euros) of farm output excluding aids to volume of intermediate consumption, has fallen by nearly 20% while income per worker has held stable thanks to subsidies and the labour productivity gains made. This aggregate technical efficiency of beef cattle systems is positively correlated to feed self-sufficiency, which is in turn negatively correlated to farm and herd size. While volume of farm output per hectare of agricultural area has not changed, forage feed self-sufficiency decreased by 6 percentage points. The continual increase in farm size and labour productivity has come at a cost of lower production-system efficiency - a loss of technical efficiency that 20 years of genetic, technical, technological and knowledge-driven progress has barely managed to offset.

  7. Modelling and analysis of solar cell efficiency distributions

    Science.gov (United States)

    Wasmer, Sven; Greulich, Johannes

    2017-08-01

    We present an approach to model the distribution of solar cell efficiencies achieved in production lines based on numerical simulations, metamodeling and Monte Carlo simulations. We validate our methodology using the example of an industrial feasible p-type multicrystalline silicon “passivated emitter and rear cell” process. Applying the metamodel, we investigate the impact of each input parameter on the distribution of cell efficiencies in a variance-based sensitivity analysis, identifying the parameters and processes that need to be improved and controlled most accurately. We show that if these could be optimized, the mean cell efficiencies of our examined cell process would increase from 17.62% ± 0.41% to 18.48% ± 0.09%. As the method relies on advanced characterization and simulation techniques, we furthermore introduce a simplification that enhances applicability by only requiring two common measurements of finished cells. The presented approaches can be especially helpful for ramping-up production, but can also be applied to enhance established manufacturing.

  8. Product models for the Construction industry

    DEFF Research Database (Denmark)

    Sørensen, Lars Schiøtt

    1996-01-01

    Different types of product models for the building sector was elaborated and grouped. Some discussion on the different models was given. The "definition" of Product models was given.......Different types of product models for the building sector was elaborated and grouped. Some discussion on the different models was given. The "definition" of Product models was given....

  9. Evaluation of the energy efficiency of enzyme fermentation by mechanistic modeling

    DEFF Research Database (Denmark)

    Albaek, Mads O.; Gernaey, Krist V.; Hansen, Morten S.

    2012-01-01

    Modeling biotechnological processes is key to obtaining increased productivity and efficiency. Particularly crucial to successful modeling of such systems is the coupling of the physical transport phenomena and the biological activity in one model. We have applied a model for the expression of ce...... was found. This modeling approach can be used by manufacturers to evaluate the enzyme fermentation process for a range of different process conditions with regard to energy efficiency.......Modeling biotechnological processes is key to obtaining increased productivity and efficiency. Particularly crucial to successful modeling of such systems is the coupling of the physical transport phenomena and the biological activity in one model. We have applied a model for the expression...... of cellulosic enzymes by the filamentous fungus Trichoderma reesei and found excellent agreement with experimental data. The most influential factor was demonstrated to be viscosity and its influence on mass transfer. Not surprisingly, the biological model is also shown to have high influence on the model...

  10. Efficiency of chlorophyll in gross primary productivity: A proof of concept and application in crops.

    Science.gov (United States)

    Gitelson, Anatoly A; Peng, Yi; Viña, Andrés; Arkebauer, Timothy; Schepers, James S

    2016-08-20

    One of the main factors affecting vegetation productivity is absorbed light, which is largely governed by chlorophyll. In this paper, we introduce the concept of chlorophyll efficiency, representing the amount of gross primary production per unit of canopy chlorophyll content (Chl) and incident PAR. We analyzed chlorophyll efficiency in two contrasting crops (soybean and maize). Given that they have different photosynthetic pathways (C3 vs. C4), leaf structures (dicot vs. monocot) and canopy architectures (a heliotrophic leaf angle distribution vs. a spherical leaf angle distribution), they cover a large spectrum of biophysical conditions. Our results show that chlorophyll efficiency in primary productivity is highly variable and responds to various physiological and phenological conditions, and water availability. Since Chl is accessible through non-destructive, remotely sensed techniques, the use of chlorophyll efficiency for modeling and monitoring plant optimization patterns is practical at different scales (e.g., leaf, canopy) and under widely-varying environmental conditions. Through this analysis, we directly related a functional characteristic, gross primary production with a structural characteristic, canopy chlorophyll content. Understanding the efficiency of the structural characteristic is of great interest as it allows explaining functional components of the plant system. Copyright © 2016 Elsevier GmbH. All rights reserved.

  11. Cooperative procurement: market transformation for energy efficient products

    Energy Technology Data Exchange (ETDEWEB)

    Ostertag, K.; Dreher, C.

    1999-07-01

    Cooperative procurement is a variation of public purchasing which may be used as an instrument to transform the market and stimulate innovation enhancing environmental performance. The core of the procedure is the following: Coordinated by a central agency a group of buyers - public administrations, but also private companies, associations, etc. - gets together and jointly formulates a catalogue of performance requirements for a specific product truly suiting their preferences. This catalogue may contain (combinations of) requirements not yet available on the market and includes energy efficiency and/or environmental performance among other preferences important to the users. On the basis of the product requirements the buyer group launches a call for tenders, evaluates the bids received from the manufacturers and commits to buying the winning product. Thus, a market is provided for the most successful innovators in a given area of technology. The paper discusses the effectiveness of cooperative procurement as a policy instrument in the context of innovation theory and learning curves and it presents some empirical results on the feasibility of the transfer of this policy instruments to a wider range of European countries and/or to the European level. (orig.)

  12. Energy efficient product development. 25 examples; Energiezuinige productontwikkeling. 25 voorbeelden

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2010-10-15

    This report discusses a number of examples of applications of energy efficient product development. These examples featured on separate web pages of the website www.senternovem.nl/mja from 2006 to 2010. The section on 'explanation of energy benefits' is based on a rough calculation made by SenterNovem. The examples illustrate in which stage(s) of the chain the energy benefit is realized. [Dutch] Dit rapport bevat een aantal voorbeelden van de toepassing van energiezuinige productontwikkeling. Deze voorbeelden hebben van 2006 tot 2010 als afzonderlijke pagina's gestaan op de website www.senternovem.nl/mja. De paragraaf 'Toelichting energiewinst' bij de voorbeelden is gebaseerd op een globale berekening van SenterNovem. De voorbeelden geven aan in welke fase(s) in de keten de energiewinst wordt behaald.

  13. Naturally Efficient Emitters: Luminescent Organometallic Complexes Derived from Natural Products

    Science.gov (United States)

    Zhang, Wen-Hua; Young, David J.

    2013-08-01

    Naturally occurring molecules offer intricate structures and functionality that are the basis of modern medicinal chemistry, but are under-represented in materials science. Herein, we review recent literature describing the use of abundant and relatively inexpensive, natural products for the synthesis of ligands for luminescent organometallic complexes used for organic light emitting diodes (OLEDs) and related technologies. These ligands are prepared from the renewable starting materials caffeine, camphor, pinene and cinchonine and, with the exception of caffeine, impart performance improvements to the emissive metal complexes and resulting OLED devices, with emission wavelengths that span the visible spectrum from blue to red. The advantages of these biologically-derived molecules include improved solution processibility and phase homogeneity, brighter luminescence, higher quantum efficiencies and lower turn-on voltages. While nature has evolved these carbon-skeletons for specific purposes, they also offer some intriguing benefits in materials science and technology.

  14. 75 FR 32177 - Energy Efficiency Program for Consumer Products: Commonwealth of Massachusetts Petition for...

    Science.gov (United States)

    2010-06-07

    ... DEPARTMENT OF ENERGY Office of Energy Efficiency and Renewable Energy [Docket Number EERE-BT-PET-0024] Energy Efficiency Program for Consumer Products: Commonwealth of Massachusetts Petition for Exemption From Federal Preemption of Massachusetts' Energy Efficiency Standard for Residential Non...

  15. Strategies of Production Control as Tools of Efficient Management of Production Enterprises

    Science.gov (United States)

    Budynek, Mateusz; Celińska, Elżbieta; Dybikowska, Adrianna; Kozak, Monika; Ratajczak, Joanna; Urban, Jagoda; Materne, Karolina

    2016-03-01

    The paper discusses the problem of principle methods of production control as a strategy supporting the production system and stimulating efficient solutions in respect management in production enterprises. The article describes MRP, ERP, JIT, KANBAN and TOC methods and focuses on their main goals, principles of functioning as well as benefits resulting from their application. The methods represent two diverse strategies of production control, i.e. pull and push strategies. Push strategies are used when the plans apply to the first and principle part of production and are based on the demand forecasts. Pull strategies are used when all planning decisions apply to the final stage and depend on the actual demand or orders from customers.

  16. STRATEGIES OF PRODUCTION CONTROL AS TOOLS OF EFFICIENT MANAGEMENT OF PRODUCTION ENTERPRISES

    Directory of Open Access Journals (Sweden)

    Mateusz BUDYNEK

    2016-01-01

    Full Text Available The paper discusses the problem of principle methods of production control as a strategy supporting the production system and stimulating efficient solutions in respect management in production enterprises. The article describes MRP, ERP, JIT, KANBAN and TOC methods and focuses on their main goals, principles of functioning as well as benefits re-sulting from their application. The methods represent two diverse strategies of production control, i.e. pull and push strategies. Push strategies are used when the plans apply to the first and principle part of production and are based on the demand forecasts. Pull strategies are used when all planning decisions apply to the final stage and depend on the actual demand or orders from customers.

  17. An efficient and simplified model for forecasting using SRM

    International Nuclear Information System (INIS)

    Asif, H.M.; Hyat, M.F.; Ahmad, T.

    2014-01-01

    Learning form continuous financial systems play a vital role in enterprise operations. One of the most sophisticated non-parametric supervised learning classifiers, SVM (Support Vector Machines), provides robust and accurate results, however it may require intense computation and other resources. The heart of SLT (Statistical Learning Theory), SRM (Structural Risk Minimization )Principle can also be used for model selection. In this paper, we focus on comparing the performance of model estimation using SRM with SVR (Support Vector Regression) for forecasting the retail sales of consumer products. The potential benefits of an accurate sales forecasting technique in businesses are immense. Retail sales forecasting is an integral part of strategic business planning in areas such as sales planning, marketing research, pricing, production planning and scheduling. Performance comparison of support vector regression with model selection using SRM shows comparable results to SVR but in a computationally efficient manner. This research targeted the real life data to conclude the results after investigating the computer generated datasets for different types of model building. (author)

  18. An Efficient and Simplified Model for Forecasting using SRM

    Directory of Open Access Journals (Sweden)

    Hafiz Muhammad Shahzad Asif

    2014-01-01

    Full Text Available Learning form continuous financial systems play a vital role in enterprise operations. One of the most sophisticated non-parametric supervised learning classifiers, SVM (Support Vector Machines, provides robust and accurate results, however it may require intense computation and other resources. The heart of SLT (Statistical Learning Theory, SRM (Structural Risk Minimization Principle can also be used for model selection. In this paper, we focus on comparing the performance of model estimation using SRM with SVR (Support Vector Regression for forecasting the retail sales of consumer products. The potential benefits of an accurate sales forecasting technique in businesses are immense. Retail sales forecasting is an integral part of strategic business planning in areas such as sales planning, marketing research, pricing, production planning and scheduling. Performance comparison of support vector regression with model selection using SRM shows comparable results to SVR but in a computationally efficient manner. This research targeted the real life data to conclude the results after investigating the computer generated datasets for different types of model building

  19. Computer-aided modeling framework for efficient model development, analysis and identification

    DEFF Research Database (Denmark)

    Heitzig, Martina; Sin, Gürkan; Sales Cruz, Mauricio

    2011-01-01

    Model-based computer aided product-process engineering has attained increased importance in a number of industries, including pharmaceuticals, petrochemicals, fine chemicals, polymers, biotechnology, food, energy, and water. This trend is set to continue due to the substantial benefits computer-aided...... methods introduce. The key prerequisite of computer-aided product-process engineering is however the availability of models of different types, forms, and application modes. The development of the models required for the systems under investigation tends to be a challenging and time-consuming task....... The methodology has been implemented into a computer-aided modeling framework, which combines expert skills, tools, and database connections that are required for the different steps of the model development work-flow with the goal to increase the efficiency of the modeling process. The framework has two main...

  20. Pervaporation membrane bioreactor with permeate fractional condensation and mechanical vapor compression for energy efficient ethanol production

    International Nuclear Information System (INIS)

    Fan, Senqing; Xiao, Zeyi; Li, Minghai; Li, Sizhong

    2016-01-01

    Graphical abstract: Pervaporation membrane bioreactor with permeate partial condensation and mechanical vapor compression is developed for an energy efficient ethanol production. - Highlights: • PVMBR-MVC for energy efficient ethanol production. • Process separation factor of 20–44 for ethanol achieved by fractional condensation. • Energy production of 20.25 MJ and hourly energy production of 56.25 kJ/h achieved. • Over 50% of energy saved in PVMBR-MVC compared with PVMBR-LTC. • Integrated heat pump with COP of 7–9 for the energy recovery of the permeate. - Abstract: Improved process separation factor and heat integration are two key issues to increase the energy efficiency of ethanol production in a pervaporation membrane bioreactor (PVMBR). A PVMBR with permeate fractional condensation and mechanical vapor compression was developed for energy efficient ethanol production. A condensation model based on the mass balance and thermodynamic equilibrium in the partial vacuum condenser was developed for predicting the purification performance of the permeate vapor. Three runs of ethanol fermentation-pervaporation experiment were carried out and ethanol concentration of higher than 50 wt% could be achieved in the final condensate, with the separation factor of the process for ethanol increased to 20. Ethanol production could be enhanced in the bioreactor and 17.1 MJ of the energy could be produced in per liter of fermentation broth, owing to 27.0 MJ/kg heating value of the recovered ethanol. Compared with the traditional pervaporation process with low temperature condensation for ethanol production, 50% of the energy would be saved in the process. The energy consumption would be further reduced, if the available energy of the permeate vapor was utilized by integrating the mechanical vapor compression heat pump.

  1. Efficient production of free fatty acids from soybean meal carbohydrates.

    Science.gov (United States)

    Wang, Dan; Thakker, Chandresh; Liu, Ping; Bennett, George N; San, Ka-Yiu

    2015-11-01

    Conversion of biomass feedstock to chemicals and fuels has attracted increasing attention recently. Soybean meal, containing significant quantities of carbohydrates, is an inexpensive renewable feedstock. Glucose, galactose, and fructose can be obtained by enzymatic hydrolysis of soluble carbohydrates of soybean meal. Free fatty acids (FFAs) are valuable molecules that can be used as precursors for the production of fuels and other value-added chemicals. In this study, free fatty acids were produced by mutant Escherichia coli strains with plasmid pXZ18Z (carrying acyl-ACP thioesterase (TE) and (3R)-hydroxyacyl-ACP dehydratase) using individual sugars, sugar mixtures, and enzymatic hydrolyzed soybean meal extract. For individual sugar fermentations, strain ML211 (MG1655 fadD(-) fabR(-) )/pXZ18Z showed the best performance, which produced 4.22, 3.79, 3.49 g/L free fatty acids on glucose, fructose, and galactose, respectively. While the strain ML211/pXZ18Z performed the best with individual sugars, however, for sugar mixture fermentation, the triple mutant strain XZK211 (MG1655 fadD(-) fabR(-) ptsG(-) )/pXZ18Z with an additional deletion of ptsG encoding the glucose-specific transporter, functioned the best due to relieved catabolite repression. This strain produced approximately 3.18 g/L of fatty acids with a yield of 0.22 g fatty acids/g total sugar. Maximum free fatty acids production of 2.78 g/L with a high yield of 0.21 g/g was achieved using soybean meal extract hydrolysate. The results suggested that soybean meal carbohydrates after enzymatic treatment could serve as an inexpensive feedstock for the efficient production of free fatty acids. © 2015 Wiley Periodicals, Inc.

  2. Coordinated supply chain dynamic production planning model

    Science.gov (United States)

    Chandra, Charu; Grabis, Janis

    2001-10-01

    Coordination of different and often contradicting interests of individual supply chain members is one of the important issues in supply chain management because the individual members can not succeed without success of the supply chain and vice versa. This paper investigates a supply chain dynamic production planning problem with emphasis on coordination. A planning problem is formally described using a supply chain kernel, which defines supply chain configuration, management policies, available resources and objectives both at supply chain or macro and supply chain member or micro levels. The coordinated model is solved in order to balance decisions made at the macro and micro levels and members' profitability is used as the coordination criterion. The coordinated model is used to determine inventory levels and production capacity across the supply chain. Application of the coordinated model distributes costs burden uniformly among supply chain members and preserves overall efficiency of the supply chain. Influence of the demand series uncertainty is investigated. The production planning model is a part of the integrated supply chain decision modeling system, which is shared among the supply chain members across the Internet.

  3. A comparison of production system life cycle models

    Science.gov (United States)

    Attri, Rajesh; Grover, Sandeep

    2012-09-01

    Companies today need to keep up with the rapidly changing market conditions to stay competitive. The main issues in this paper are related to a company's market and its competitors. The prediction of market behavior is helpful for a manufacturing enterprise to build efficient production systems. However, these predictions are usually not reliable. A production system is required to adapt to changing markets, but such requirement entails higher cost. Hence, analyzing different life cycle models of the production system is necessary. In this paper, different life cycle models of the production system are compared to evaluate the distinctive features and the limitations of each model. Furthermore, the difference between product life cycle and production life cycle is summarized, and the effect of product life cycle on production life cycle is explained. Finally, a production system life cycle model, along with key activities to be performed in each stage, is proposed specifically for the manufacturing sector.

  4. Productive efficiency of public and private solid waste logistics and its implications for waste management policy

    Directory of Open Access Journals (Sweden)

    Daisuke Ichinose

    2013-03-01

    Full Text Available This paper measures the productive efficiency of municipal solid waste (MSW logistics by applying data envelopment analysis (DEA to cross-sectional data of prefectures in Japan. Either through public operations or by outsourcing to private waste collection operators, prefectural governments possess the fundamental authority over waste processing operations in Japan. Therefore, we estimate a multi-input multi-output production efficiency at the prefectural level via DEA, employing several different model settings. Our data classify the MSW into household solid waste (HSW and business solid waste (BSW collected by both private and public operators as separate outputs, while the numbers of trucks and workers used by private and public operators are used as inputs. The results consistently show that geographical characteristics, such as the number of inhabited remote islands, are relatively more dominant factors for determining inefficiency. While the implication that a minimum efficient scale is not achieved in these small islands is in line with the literature suggesting that waste logistics has increasing returns at the municipal level, our results indicate that waste collection efficiency in Japan is well described by CRS technology at the prefectural level. The results also show that prefectures with higher private-sector participation, measured in terms of HSW collection, are more efficient, whereas a higher private–labor ratio negatively affects efficiency. We also provide evidence that prefectures with inefficient MSW logistics have a higher tendency of suffering from the illegal dumping of industrial waste.

  5. Impact of Erratic Rainfall from Climate Change on Pulse Production Efficiency in Lower Myanmar

    Directory of Open Access Journals (Sweden)

    Sein Mar

    2018-02-01

    Full Text Available Erratic rainfall has a detrimental impact on crop productivity but rainfall during the specific growth stage is rarely used in efficiency analysis. This study focuses on this untapped point and examines the influence of rainfall specifically encountered during the sowing stage and early vegetative growth stage and the flowering stage of pulses on productivity and efficiency in Lower Myanmar using data from 182 sample farmers. The results of a stochastic frontier production function reveal that rainfall incidence during the flowering season of pulses has a negatively significant effect on yield while replanting crops after serious damage by rain increases productivity. Controlled rainfall variables, seed rate, human labor and land preparation cost are important parameters influencing pulses yield. In the efficiency model, levels of yield loss have a negative impact while being a male household head, access to government credit, access to training, locating farms in the Bago Region and possessing a large area of pulses have a positively significant effect on technical efficiency. Policy recommendations include the establishment of a safety network, such as crop insurance to protect farmers from losses due to unpredictable weather conditions, promoting training programs on cultural practices adapted to climate change, wide coverage of extension activities, giving priority to small-scale farmers and female farmer participation in training and extension activities and increasing the rate of credit availability to farmers.

  6. Alternative Approaches to Technical Efficiency Estimation in the Stochastic Frontier Model

    OpenAIRE

    Acquah, H. de-Graft; Onumah, E. E.

    2014-01-01

    Estimating the stochastic frontier model and calculating technical efficiency of decision making units are of great importance in applied production economic works. This paper estimates technical efficiency from the stochastic frontier model using Jondrow, and Battese and Coelli approaches. In order to compare alternative methods, simulated data with sample sizes of 60 and 200 are generated from stochastic frontier model commonly applied to agricultural firms. Simulated data is employed to co...

  7. Fiscal 1999 report on result of the model project for systematization of high-efficiency combustion of by-product gas in ironworks. Part 1/2; 1999 nendo seitetsusho fukusei gas koritsu nensho system ka model jigyo. 1/2

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-09-01

    For the purpose of curtailing energy consumption of the steel industry, a large energy consuming industry in China, a model project was carried out for high-efficiency combustion system for by-product gasses in ironworks, with the fiscal 1999 results reported. This project is such that, in the reheating furnaces consuming as fuels various combustible gasses produced in iron and steel making processes, systems to permit control of mixed-gas calorie and oxygen content in a reheating furnace are incorporated, with demonstration and dissemination performed for technologies on improving energy consumption efficiency. This year, site survey was conducted to obtain information needed for the basic design for the model project. The heat balance of the objective reheating furnaces revealed that the fuel consumption could be reduced by 6 to 35% by implementing the model project. Investigations were made also on the obstructive impurities contained in the by-product gasses and on the gas purification equipment, etc., which elucidated that the impurity content was about the same as that of the major ironworks in Korea and Taiwan and that there would be no problem if proper inspection and maintenance were carried out. As for the equipment and devices, the majority with software was manufactured and transported to Chingdao, China. Further, Chinese engineers were invited to Japan for technical training. (NEDO)

  8. Effective and efficient model clone detection

    DEFF Research Database (Denmark)

    Störrle, Harald

    2015-01-01

    Code clones are a major source of software defects. Thus, it is likely that model clones (i.e., duplicate fragments of models) have a significant negative impact on model quality, and thus, on any software created based on those models, irrespective of whether the software is generated fully...... automatically (“MDD-style”) or hand-crafted following the blueprint defined by the model (“MBSD-style”). Unfortunately, however, model clones are much less well studied than code clones. In this paper, we present a clone detection algorithm for UML domain models. Our approach covers a much greater variety...... of model types than existing approaches while providing high clone detection rates at high speed....

  9. Crop and soil specific N and P efficiency and productivity in Finland

    Directory of Open Access Journals (Sweden)

    S. BÄCKMAN

    2008-12-01

    Full Text Available This paper estimates a stochastic production frontier based on experimental data of cereals production in Finland over the period 1977-1994. The estimates of the production frontier are used to analyze nitrogen and phosphorous productivity and efficiency differences between soils and crops. For this input specific efficiencies are calculated. The results can be used to recognize relations between fertilizer management and soil types as well as to learn where certain soil types and crop combinations require special attention to fertilization strategy. The combination of inputs as designed by the experiment shows significant inefficiencies for both N and P. The measures of mineral productivity and efficiency indicate that clay is the most mineral efficient and productive soil while silt and organic soils are the least efficient and productive soils. Furthermore, a positive correlation is found between mineral productivity and efficiency. The results indicate that substantial technical efficiency differences between different experiments prevail.;

  10. Improving The Efficiency Of Ammonia Electrolysis For Hydrogen Production

    Science.gov (United States)

    Palaniappan, Ramasamy

    Given the abundance of ammonia in domestic and industrial wastes, ammonia electrolysis is a promising technology for remediation and distributed power generation in a clean and safe manner. Efficiency has been identified as one of the key issues that require improvement in order for the technology to enter the market phase. Therefore, this research was performed with the aim of improving the efficiency of hydrogen production by finding alternative materials for the cathode and electrolyte. 1. In the presence of ammonia the activity for hydrogen evolution reaction (HER) followed the trend Rh>Pt>Ru>Ni. The addition of ammonia resulted in lower rates for HER for Pt, Ru, and Ni, which have been attributed to competition from the ammonia adsorption reaction. 2. The addition of ammonia offers insight into the role of metal-hydrogen underpotential deposition (M-Hupd) on HER kinetics. In addition to offering competition via ammonia adsorption it resulted in fewer and weaker M-Hupd bonds for all metals. This finding substantiates the theory that M-Hupd bonds favor HER on Pt electrocatalyst. However, for Rh results suggest that M-Hupd bond may hinder the HER. In addition, the presence of unpaired valence shell electrons is suggested to provide higher activity for HER in the presence of ammonia. 3. Bimetals PtxM1-x (M = Ir, Ru, Rh, and Ni) offered lower overpotentials for HER compared to the unalloyed metals in the presence of ammonia. The activity of HER in the presence of ammonia follows the trend Pt-Ir>Pt-Rh>Pt-Ru>Pt-Ni. The higher activity of HER is attributed to the synergistic effect of the alloy, where ammonia adsorbs onto the more electropositive alloying metal leaving Pt available for Hupd formation and HER to take place. Additionally, this supports the theory that the presence of a higher number of unpaired electrons favors the HER in the presence of ammonia. 4. Potassium polyacrylate (PAA-K) was successfully used as a substitute for aqueous KOH for ammonia

  11. Hydrogen production methods efficiency coupled to an advanced high temperature accelerator driven system

    International Nuclear Information System (INIS)

    Rodríguez, Daniel González; Lira, Carlos Alberto Brayner de Oliveira

    2017-01-01

    The hydrogen economy is one of the most promising concepts for the energy future. In this scenario, oil is replaced by hydrogen as an energy carrier. This hydrogen, rather than oil, must be produced in volumes not provided by the currently employed methods. In this work two high temperature hydrogen production methods coupled to an advanced nuclear system are presented. A new design of a pebbled-bed accelerator nuclear driven system called TADSEA is chosen because of the advantages it has in matters of transmutation and safety. For the conceptual design of the high temperature electrolysis process a detailed computational fluid dynamics model was developed to analyze the solid oxide electrolytic cell that has a huge influence on the process efficiency. A detailed flowsheet of the high temperature electrolysis process coupled to TADSEA through a Brayton gas cycle was developed using chemical process simulation software: Aspen HYSYS®. The model with optimized operating conditions produces 0.1627 kg/s of hydrogen, resulting in an overall process efficiency of 34.51%, a value in the range of results reported by other authors. A conceptual design of the iodine-sulfur thermochemical water splitting cycle was also developed. The overall efficiency of the process was calculated performing an energy balance resulting in 22.56%. The values of efficiency, hydrogen production rate and energy consumption of the proposed models are in the values considered acceptable in the hydrogen economy concept, being also compatible with the TADSEA design parameters. (author)

  12. Hydrogen production methods efficiency coupled to an advanced high temperature accelerator driven system

    Energy Technology Data Exchange (ETDEWEB)

    Rodríguez, Daniel González; Lira, Carlos Alberto Brayner de Oliveira [Universidade Federal de Pernambuco (UFPE), Recife, PE (Brazil). Departamento de Energia Nuclear; Fernández, Carlos García, E-mail: danielgonro@gmail.com, E-mail: mmhamada@ipen.br [Instituto Superior de Tecnologías y Ciencias aplicadas (InSTEC), La Habana (Cuba)

    2017-07-01

    The hydrogen economy is one of the most promising concepts for the energy future. In this scenario, oil is replaced by hydrogen as an energy carrier. This hydrogen, rather than oil, must be produced in volumes not provided by the currently employed methods. In this work two high temperature hydrogen production methods coupled to an advanced nuclear system are presented. A new design of a pebbled-bed accelerator nuclear driven system called TADSEA is chosen because of the advantages it has in matters of transmutation and safety. For the conceptual design of the high temperature electrolysis process a detailed computational fluid dynamics model was developed to analyze the solid oxide electrolytic cell that has a huge influence on the process efficiency. A detailed flowsheet of the high temperature electrolysis process coupled to TADSEA through a Brayton gas cycle was developed using chemical process simulation software: Aspen HYSYS®. The model with optimized operating conditions produces 0.1627 kg/s of hydrogen, resulting in an overall process efficiency of 34.51%, a value in the range of results reported by other authors. A conceptual design of the iodine-sulfur thermochemical water splitting cycle was also developed. The overall efficiency of the process was calculated performing an energy balance resulting in 22.56%. The values of efficiency, hydrogen production rate and energy consumption of the proposed models are in the values considered acceptable in the hydrogen economy concept, being also compatible with the TADSEA design parameters. (author)

  13. Efficient estimation of semiparametric copula models for bivariate survival data

    KAUST Repository

    Cheng, Guang

    2014-01-01

    A semiparametric copula model for bivariate survival data is characterized by a parametric copula model of dependence and nonparametric models of two marginal survival functions. Efficient estimation for the semiparametric copula model has been recently studied for the complete data case. When the survival data are censored, semiparametric efficient estimation has only been considered for some specific copula models such as the Gaussian copulas. In this paper, we obtain the semiparametric efficiency bound and efficient estimation for general semiparametric copula models for possibly censored data. We construct an approximate maximum likelihood estimator by approximating the log baseline hazard functions with spline functions. We show that our estimates of the copula dependence parameter and the survival functions are asymptotically normal and efficient. Simple consistent covariance estimators are also provided. Numerical results are used to illustrate the finite sample performance of the proposed estimators. © 2013 Elsevier Inc.

  14. EFFICIENT PREDICTIVE MODELLING FOR ARCHAEOLOGICAL RESEARCH

    OpenAIRE

    Balla, A.; Pavlogeorgatos, G.; Tsiafakis, D.; Pavlidis, G.

    2014-01-01

    The study presents a general methodology for designing, developing and implementing predictive modelling for identifying areas of archaeological interest. The methodology is based on documented archaeological data and geographical factors, geospatial analysis and predictive modelling, and has been applied to the identification of possible Macedonian tombs’ locations in Northern Greece. The model was tested extensively and the results were validated using a commonly used predictive gain, which...

  15. Development of efficient photoreactors for solar hydrogen production

    Energy Technology Data Exchange (ETDEWEB)

    Huang, Cunping; Yao, Weifeng; T-Raissi, Ali; Muradov, Nazim [University of Central Florida, Florida Solar Energy Center, 1679 Clearlake Road, Cocoa, Fl 32922-5703 (United States)

    2011-01-15

    The rate of hydrogen evolution from a photocatalytic process depends not only on the activity of a photocatalyst, but also on photoreactor design. Ideally, a photoreactor should be able to absorb the incident light, promoting photocatalytic reactions in an effective manner with minimal photonic losses. There are numerous technical challenges and cost related issues when designing a large-scale photoreactor for hydrogen production. Active stirring of the photocatalyst slurry within a photoreactor is not practical in large-scale applications due to cost related issues. Rather, the design should allow facile self-mixing of the flow field within the photoreactor. In this paper two types of photocatalytic reactor configurations are studied: a batch type design and another involving passive self-mixing of the photolyte. Results show that energy loss from a properly designed photoreactor is mainly due to reflection losses from the photoreactor window. We describe the interplay between the reaction and the photoreactor design parameters as well as effects on the rate of hydrogen evolution. We found that a passive self-mixing of the photolyte is possible. Furthermore, the use of certain engineering polymer films as photoreactor window materials has the potential for substantial cost savings in large-scale applications, with minimal reduction of photon energy utilization efficiency. Eight window materials were tested and the results indicate that Aclar trademark polymer film used as the photoreactor window provides a substantial cost saving over other engineering polymers, especially with respect to fused silica glass at modest hydrogen evolution rates. (author)

  16. A model for optimizing the production of pharmaceutical products

    Directory of Open Access Journals (Sweden)

    Nevena Gospodinova

    2017-05-01

    Full Text Available The problem associated with the optimal production planning is especially relevant in modern industrial enterprises. The most commonly used optimality criteria in this context are: maximizing the total profit; minimizing the cost per unit of production; maximizing the capacity utilization; minimizing the total production costs. This article aims to explore the possibility for optimizing the production of pharmaceutical products through the construction of a mathematical model that can be viewed in two ways – as a single-product model and a multi-product model. As an optimality criterion it is set the minimization of the cost per unit of production for a given planning period. The author proposes an analytical method for solving the nonlinear optimization problem. An optimal production plan of Tylosin tartrate is found using the single-product model.

  17. Information, complexity and efficiency: The automobile model

    Energy Technology Data Exchange (ETDEWEB)

    Allenby, B. [Lucent Technologies (United States)]|[Lawrence Livermore National Lab., CA (United States)

    1996-08-08

    The new, rapidly evolving field of industrial ecology - the objective, multidisciplinary study of industrial and economic systems and their linkages with fundamental natural systems - provides strong ground for believing that a more environmentally and economically efficient economy will be more information intensive and complex. Information and intellectual capital will be substituted for the more traditional inputs of materials and energy in producing a desirable, yet sustainable, quality of life. While at this point this remains a strong hypothesis, the evolution of the automobile industry can be used to illustrate how such substitution may, in fact, already be occurring in an environmentally and economically critical sector.

  18. Business process model repositories : efficient process retrieval

    NARCIS (Netherlands)

    Yan, Z.

    2012-01-01

    As organizations increasingly work in process-oriented manner, the number of business process models that they develop and have to maintain increases. As a consequence, it has become common for organizations to have collections of hundreds or even thousands of business process models. When a

  19. Efficient querying of large process model repositories

    NARCIS (Netherlands)

    Jin, Tao; Wang, Jianmin; La Rosa, M.; Hofstede, ter A.H.M.; Wen, Lijie

    2013-01-01

    Recent years have seen an increased uptake of business process management technology in industries. This has resulted in organizations trying to manage large collections of business process models. One of the challenges facing these organizations concerns the retrieval of models from large business

  20. MODEL TESTING OF LOW PRESSURE HYDRAULIC TURBINE WITH HIGHER EFFICIENCY

    Directory of Open Access Journals (Sweden)

    V. K. Nedbalsky

    2007-01-01

    Full Text Available A design of low pressure turbine has been developed and it is covered by an invention patent and a useful model patent. Testing of the hydraulic turbine model has been carried out when it was installed on a vertical shaft. The efficiency was equal to 76–78 % that exceeds efficiency of the known low pressure blade turbines. 

  1. Organizational Learning and Product Design Management: Towards a Theoretical Model.

    Science.gov (United States)

    Chiva-Gomez, Ricardo; Camison-Zornoza, Cesar; Lapiedra-Alcami, Rafael

    2003-01-01

    Case studies of four Spanish ceramics companies were used to construct a theoretical model of 14 factors essential to organizational learning. One set of factors is related to the conceptual-analytical phase of the product design process and the other to the creative-technical phase. All factors contributed to efficient product design management…

  2. Product Family Modelling for Manufacturing Planning

    DEFF Research Database (Denmark)

    Jørgensen, Kaj Asbjørn; Petersen, Thomas Ditlev; Nielsen, Kjeld

    2011-01-01

    To enable product configuration of a product family, it is important to develop a model of the selected product family. From such a model, an often performed practice is to make a product configurator from which customers can specify individual products from the family. To get further utilisation...

  3. Stochastic Frontier Approach and Data Envelopment Analysis to Total Factor Productivity and Efficiency Measurement of Bangladeshi Rice

    Science.gov (United States)

    Hossain, Md. Kamrul; Kamil, Anton Abdulbasah; Baten, Md. Azizul; Mustafa, Adli

    2012-01-01

    The objective of this paper is to apply the Translog Stochastic Frontier production model (SFA) and Data Envelopment Analysis (DEA) to estimate efficiencies over time and the Total Factor Productivity (TFP) growth rate for Bangladeshi rice crops (Aus, Aman and Boro) throughout the most recent data available comprising the period 1989–2008. Results indicate that technical efficiency was observed as higher for Boro among the three types of rice, but the overall technical efficiency of rice production was found around 50%. Although positive changes exist in TFP for the sample analyzed, the average growth rate of TFP for rice production was estimated at almost the same levels for both Translog SFA with half normal distribution and DEA. Estimated TFP from SFA is forecasted with ARIMA (2, 0, 0) model. ARIMA (1, 0, 0) model is used to forecast TFP of Aman from DEA estimation. PMID:23077500

  4. Management Index Systems and Energy Efficiency Diagnosis Model for Power Plant: Cases in China

    Directory of Open Access Journals (Sweden)

    Jing-Min Wang

    2016-01-01

    Full Text Available In recent years, the energy efficiency of thermal power plant largely contributes to that of the industry. A thorough understanding of influencing factors, as well as the establishment of scientific and comprehensive diagnosis model, plays a key role in the operational efficiency and competitiveness for the thermal power plant. Referring to domestic and abroad researches towards energy efficiency management, based on Cloud model and data envelopment analysis (DEA model, a qualitative and quantitative index system and a comprehensive diagnostic model (CDM are construed. To testify rationality and usability of CDM, case studies of large-scaled Chinese thermal power plants have been conducted. In this case, CDM excavates such qualitative factors as technology, management, and so forth. The results shows that, compared with conventional model, which only considered production running parameters, the CDM bears better adaption to reality. It can provide entities with efficient instruments for energy efficiency diagnosis.

  5. Modelling household responses to energy efficiency interventions ...

    African Journals Online (AJOL)

    2010-11-01

    Nov 1, 2010 ... to interventions aimed at reducing energy consumption (specifically the use of .... 4 A system dynamics model of electricity consumption ...... to base comparisons on overly detailed quantitative predictions of behaviour.

  6. Testing improvements in the chocolate traceability system: Impact on product recalls and production efficiency

    DEFF Research Database (Denmark)

    Saltini, Rolando; Akkerman, Renzo

    2012-01-01

    hypothetical improvements of the traceability system within the chocolate production system and supply chain and we illustrate the resulting benefits by using a case study. Based on the case study, we quantify the influence of these improvements on production efficiency and recall size in case of a safety......The primary aim of food traceability is to increase food safety, but traceability systems can also bring other benefits to production systems and supply chains. In the literature these benefits are extensively discussed, but studies that quantify them are scarce. In this paper we propose two...... crisis by developing a simulation tool. These results are aimed to illustrate and quantify the additional benefits of traceability information, and could help food industries in deciding whether and how to improve their traceability systems....

  7. Design, characterization and modelling of high efficient solar powered lighting systems

    DEFF Research Database (Denmark)

    Svane, Frederik; Nymann, Peter; Poulsen, Peter Behrensdorff

    2016-01-01

    This paper discusses some of the major challenges in the development of L2L (Light-2-Light) products. It’s the lack of efficient converter electronics, modelling tools for dimensioning and furthermore, characterization facilities to support the successful development of the products. We report...

  8. Production economic models of fisheries

    DEFF Research Database (Denmark)

    Andersen, Jesper Levring

    The overall purpose of this PhD thesis is to investigate different aspects of fishermen’s behaviour using production economic models at the individual and industry levels. Three parts make up this thesis. The first part provides an overview of the thesis. The second part consists of four papers......, including all relevant factors in specific analyses is impossible, and it is therefore important to be aware of the most essential ones. As demonstrated in the literature review of Paper 1, a large number of factors may significantly influence fishermen’s short run behaviour, i.e. choice of gear type...

  9. Serum-free Erythroid Differentiation for Efficient Genetic Modification and High-Level Adult Hemoglobin Production.

    Science.gov (United States)

    Uchida, Naoya; Demirci, Selami; Haro-Mora, Juan J; Fujita, Atsushi; Raines, Lydia N; Hsieh, Matthew M; Tisdale, John F

    2018-06-15

    In vitro erythroid differentiation from primary human cells is valuable to develop genetic strategies for hemoglobin disorders. However, current erythroid differentiation methods are encumbered by modest transduction rates and high baseline fetal hemoglobin production. In this study, we sought to improve both genetic modification and hemoglobin production among human erythroid cells in vitro . To model therapeutic strategies, we transduced human CD34 + cells and peripheral blood mononuclear cells (PBMCs) with lentiviral vectors and compared erythropoietin-based erythroid differentiation using fetal-bovine-serum-containing media and serum-free media. We observed more efficient transduction (85%-93%) in serum-free media than serum-containing media (20%-69%), whereas the addition of knockout serum replacement (KSR) was required for serum-free media to promote efficient erythroid differentiation (96%). High-level adult hemoglobin production detectable by electrophoresis was achieved using serum-free media similar to serum-containing media. Importantly, low fetal hemoglobin production was observed in the optimized serum-free media. Using KSR-containing, serum-free erythroid differentiation media, therapeutic adult hemoglobin production was detected at protein levels with β-globin lentiviral transduction in both CD34 + cells and PBMCs from sickle cell disease subjects. Our in vitro erythroid differentiation system provides a practical evaluation platform for adult hemoglobin production among human erythroid cells following genetic manipulation.

  10. Surgeons' efficiency change is a major determinant of their productivity change.

    Science.gov (United States)

    Nakata, Yoshinori; Watanabe, Yuichi; Narimatsu, Hiroto; Yoshimura, Tatsuya; Otake, Hiroshi; Sawa, Tomohiro

    2016-05-09

    Purpose - The sustainability of the Japanese healthcare system is in question because the government has had a huge fiscal debt. Despite an enormous effort to cut the deficit, our healthcare expenditure is increasing every year because of the rapidly aging population. One of the solutions for this problem is to improve the productivity of healthcare. The purpose of this paper is to determine the factors that change surgeons' productivity in one year. Design/methodology/approach - The authors collected data of all surgical procedures performed at Teikyo University Hospital from April 1 through September 30 in 2014 and 2015, and computed the surgeons' Malmquist index (MI), efficiency change (EC) and technical change (TC) using non-radial and non-oriented Malmquist model under the constant returns-to-scale assumptions. The authors then divided the surgeons into two groups; one whose productivity progressed and the other whose productivity regressed. These two groups were compared to identify factors that may influence their MI. Findings - The only significant difference between the two groups was ECs (p productivity change. The best way to improve surgeons' productivity may be to enhance their efficiency regardless of their surgical volume and personal backgrounds.

  11. Using Data Envelopment Analysis to Measure International Agricultural Efficiency and Productivity

    OpenAIRE

    Arnade, Carlos Anthony

    1994-01-01

    Numerous methods for measuring multifactor productivity have been used by economists. This report uses a recently developed approach, data envlopment analysis, to measure productivity. This method can be used not only to calculate productivity but also to divide productivity measures into indices that measure technical efficiency and technical change. Technical efficiency measures the efficiency with which resources are used. Technical change measures changes in output arising from improved t...

  12. Estimation of absorbed photosynthetically active radiation and vegetation net production efficiency using satellite data

    International Nuclear Information System (INIS)

    Hanan, N.P.; Prince, S.D.; Begue, A.

    1995-01-01

    The amount of photosynthetically active radiation (PAR) absorbed by green vegetation is an important determinant of photosynthesis and growth. Methods for the estimation of fractional absorption of PAR (iff PAR ) for areas greater than 1 km 2 using satellite data are discussed, and are applied to sites in the Sahel that have a sparse herb layer and tree cover of less than 5%. Using harvest measurements of seasonal net production, net production efficiencies are calculated. Variation in estimates of seasonal PAR absorption (APAR) caused by the atmospheric correction method and relationship between surface reflectances and iff PAR is considered. The use of maximum value composites of satellite NDVI to reduce the effect of the atmosphere is shown to produce inaccurate APAR estimates. In this data set, however, atmospheric correction using average optical depths was found to give good approximations of the fully corrected data. A simulation of canopy radiative transfer using the SAIL model was used to derive a relationship between canopy NDVI and iff PAR . Seasonal APAR estimates assuming a 1:1 relationship between iff PAR and NDVI overestimated the SAIL modeled results by up to 260%. The use of a modified 1:1 relationship, where iff PAR was assumed to be linearly related to NDVI scaled between minimum (soil) and maximum (infinite canopy) values, underestimated the SAIL modeled results by up to 35%. Estimated net production efficiencies (ϵ n , dry matter per unit APAR) fell in the range 0.12–1.61 g MJ −1 for above ground production, and in the range 0.16–1.88 g MJ −1 for total production. Sites with lower rainfall had reduced efficiencies, probably caused by physiological constraints on photosynthesis during dry conditions. (author)

  13. Improving the thermal efficiency of a jaggery production module using a fire-tube heat exchanger.

    Science.gov (United States)

    La Madrid, Raul; Orbegoso, Elder Mendoza; Saavedra, Rafael; Marcelo, Daniel

    2017-12-15

    Jaggery is a product obtained after heating and evaporation processes have been applied to sugar cane juice via the addition of thermal energy, followed by the crystallisation process through mechanical agitation. At present, jaggery production uses furnaces and pans that are designed empirically based on trial and error procedures, which results in low ranges of thermal efficiency operation. To rectify these deficiencies, this study proposes the use of fire-tube pans to increase heat transfer from the flue gases to the sugar cane juice. With the aim of increasing the thermal efficiency of a jaggery installation, a computational fluid dynamic (CFD)-based model was used as a numerical tool to design a fire-tube pan that would replace the existing finned flat pan. For this purpose, the original configuration of the jaggery furnace was simulated via a pre-validated CFD model in order to calculate its current thermal performance. Then, the newly-designed fire-tube pan was virtually replaced in the jaggery furnace with the aim of numerically estimating the thermal performance at the same operating conditions. A comparison of both simulations highlighted the growth of the heat transfer rate at around 105% in the heating/evaporation processes when the fire-tube pan replaced the original finned flat pan. This enhancement impacted the jaggery production installation, whereby the thermal efficiency of the installation increased from 31.4% to 42.8%. Copyright © 2017 Elsevier Ltd. All rights reserved.

  14. Increased light-use efficiency sustains net primary productivity of shaded coffee plants in agroforestry system.

    Science.gov (United States)

    Charbonnier, Fabien; Roupsard, Olivier; le Maire, Guerric; Guillemot, Joannès; Casanoves, Fernando; Lacointe, André; Vaast, Philippe; Allinne, Clémentine; Audebert, Louise; Cambou, Aurélie; Clément-Vidal, Anne; Defrenet, Elsa; Duursma, Remko A; Jarri, Laura; Jourdan, Christophe; Khac, Emmanuelle; Leandro, Patricia; Medlyn, Belinda E; Saint-André, Laurent; Thaler, Philippe; Van Den Meersche, Karel; Barquero Aguilar, Alejandra; Lehner, Peter; Dreyer, Erwin

    2017-08-01

    In agroforestry systems, shade trees strongly affect the physiology of the undergrown crop. However, a major paradigm is that the reduction in absorbed photosynthetically active radiation is, to a certain extent, compensated by an increase in light-use efficiency, thereby reducing the difference in net primary productivity between shaded and non-shaded plants. Due to the large spatial heterogeneity in agroforestry systems and the lack of appropriate tools, the combined effects of such variables have seldom been analysed, even though they may help understand physiological processes underlying yield dynamics. In this study, we monitored net primary productivity, during two years, on scales ranging from individual coffee plants to the entire plot. Absorbed radiation was mapped with a 3D model (MAESPA). Light-use efficiency and net assimilation rate were derived for each coffee plant individually. We found that although irradiance was reduced by 60% below crowns of shade trees, coffee light-use efficiency increased by 50%, leaving net primary productivity fairly stable across all shade levels. Variability of aboveground net primary productivity of coffee plants was caused primarily by the age of the plants and by intraspecific competition among them (drivers usually overlooked in the agroforestry literature) rather than by the presence of shade trees. © 2017 John Wiley & Sons Ltd.

  15. Environmentally friendly disinfectant: Production, disinfectant action and efficiency

    Directory of Open Access Journals (Sweden)

    Čekerevac Milan I.

    2006-01-01

    Full Text Available Silver is a known disinfectant from ancient times, and it has been widely used for various purposes: for food and water disinfection, curing of wounds and as a universal antibiotic for a wide spectrum of diseases - until the Second World War and the discovery of penicillin. Until recently, it was assumed that silver, being a heavy metal, was toxic for humans and living beings. However, the newest research provides facts that the usage of silver, even for drinking water disinfection, is benign if it is added in small concentrations (in parts per billion. It has been shown in the newer scientific and technical literature that silver in colloidal form is a powerful (secondary disinfectant for drinking water, that it can be effectively used for the disinfection of water containers including swimming pools, installations in food industry, medicine, etc. Particularly, it has been shown that colloidal silver combined with hydrogen peroxide shows synergism having strong bactericidal and antiviral effects. The combination can be successfully used as a disinfectant in agriculture, food production and medicine. The original electrochemical process of production, the mechanism of physical-chemical reactions in that process and the mechanism of the antiseptic affect of the environmentally friendly disinfectant, based on the synergism of colloidal silver and hydrogen peroxide and the activity of electrochemically activated water, is shown. The starting solution was anolyte, obtained in electrochemical activation by water electrolysis of a highly diluted solution of K-tartarate in demineralized water (5.5-1CT4 M. The problem of electrolysis of very dilute aqueous solutions in membrane cells was particularly treated. It was shown that the efficiency of the electrolysis depends on the competition between the two processes: the rates of the processes of hydrogen and oxygen generation at the electrodes and the process of diffusion of hydrogen and hydroxyl ions

  16. Embryo-transfer twinning and performance efficiency in beef production.

    Science.gov (United States)

    Guerra-Martinez, P; Dickerson, G E; Anderson, G B; Green, R D

    1990-12-01

    Effects of twinning on efficiency of beef production were estimated from results of bilateral transfer of two Angus x Hereford (AxH) embryos into each of 241 heifers and 84 cows (H, A, HxA or Holstein x H) over 4 yr. Calves were weaned at 180 d and fed either 220 d in a feedlot (1977) or 170 d on forage and 140 d in a feedlot (1978 to 1980). Effects of parity, twinning and sex of calf were estimated as covariates within year-breed of dam. Pregnancy at 45 to 60 d of gestation was 68% in heifers (H) and 74% in cows (C), with 40% single (S) and 60% twin (T) births. Dystocia was 28% in H vs 10% in C (P less than .05), and tended to be less (P greater than .05) for T than S in H. More placentas were retained (P less than .05) for T than for S in both H (35 vs 12%) and C (24 vs 4%). Twin gestations averaged 3 d shorter and subsequent calving intervals 13 d longer (P less than .05), but total calf mortality was slightly higher (P greater than .05). Abortions were 4% in H only. Twinning females lost maternal weight during late gestation (P less than .05) when crowding limited voluntary feed intake, while fetal requirements were 60% higher (P less than .01). Twins increased milk output 25% (P less than .05), but 11% higher feed intake maintained cow weight during lactation. Twinning reduced birth weight 13% and weaning weight 17% (P less than .05), but 400-d feedlot weight only 9% because of compensating feedlot gain. Twins gained 18% faster than S during postweaning 170-d forage feeding, but 5% slower in feedlot to 8% lighter 490-d weight (P less than .05). Assuming 40% higher veterinary and labor costs for twins, estimated integrated herd costs per unit of age-constant output value would be lower for T than for S production by about 24% for marketing either at weaning or at 400 d.

  17. Thermally and Chemically responsive nanoporous materials for efficient capture of fission product gases.

    Energy Technology Data Exchange (ETDEWEB)

    Stroeve, Pieter; Faller, Roland

    2018-04-24

    The objective of this project was to develop robust, high-efficiency materials for capture of fission product gases such as He, Xe and Kr in scenarios relevant for both reactor fuels and reprocessing operations. The relevant environments are extremely harsh, encompassing temperatures up to 1500 °C, high levels of radiation, as well as potential exposures to highly-reactive chemicals such as nitric acid and organic solvents such as kerosene. The requirement for nanostructured capture materials is driven in part by the very short (few micron) diffusion distances for product gases in nuclear fuel.1-2 We achieved synthesis, characterization and detailed modeling of the materials. Although not all materials reviewed in this report will be feasible for the ultimate goal of integration in nuclear fuel, nevertheless each material studied has particular properties which will enable an optimized material to be efficiently developed and characterized.

  18. Production and Reproduction Efficiency in Turcana and Ratca Sheep Breeds

    Directory of Open Access Journals (Sweden)

    Maria Sauer

    2017-05-01

    Full Text Available Aim of the current comparative study was to evaluate the production and reproduction efficiency in indigenous Turcana and endangered Ratca sheep breeds. Milk yield for the two breeds was on average 68.23±2.33 kg for Ratca ewes and 76.81±2.99 kg in Turcana, respectively, differences between two breeds were significant (p≤0.01. Conception rates were of 97.7±0.87% in Ratca and of 94.8±0.65% in Turcana ewes, respectively, differences were significant between the two flocks (p≤0.05, with the Ratca ewes achieving better fertility rates, compared to their counterparts, the Turcana breed. For prolificacy, the Turcana ewes outperformed significantly (p≤0.01 the Ratca, with an average litter size of 124.2±1.86% and 110.1±1.44%, respectively. Lambs survival and adult ewe culling rates were not affected by the breed factor (p>0.05. Adult ewes body weight when put to ram was significantly (p≤0.05 influenced by the breed, with Turcana ewes having on average 53.8±2.89 kg, compared to 48.0±3.22 kg for the Ratca ewes. The average farm yearly incomes were estimated to be of 150.32 EUR for Ratca ewe-unit and of 144.97 EUR for the Turcana ewe-unit. Although the Turcana outperformed the Ratca ewes, the annual revenue was higher for the Ratca, due to the state conservation subsidy for rare and endangered breeds.

  19. Production of a high-efficiency TILLING population through polyploidization.

    Science.gov (United States)

    Tsai, Helen; Missirian, Victor; Ngo, Kathie J; Tran, Robert K; Chan, Simon R; Sundaresan, Venkatesan; Comai, Luca

    2013-04-01

    Targeting Induced Local Lesions in Genomes (TILLING) provides a nontransgenic method for reverse genetics that is widely applicable, even in species where other functional resources are missing or expensive to build. The efficiency of TILLING, however, is greatly facilitated by high mutation density. Species vary in the number of mutations induced by comparable mutagenic treatments, suggesting that genetic background may affect the response. Allopolyploid species have often yielded higher mutation density than diploids. To examine the effect of ploidy, we autotetraploidized the Arabidopsis (Arabidopsis thaliana) ecotype Columbia, whose diploid has been used for TILLING extensively, and mutagenized it with 50 mm ethylmethane sulfonate. While the same treatment sterilized diploid Columbia, the tetraploid M1 plants produced good seed. To determine the mutation density, we searched 528 individuals for induced mutations in 15 genes for which few or no knockout alleles were previously available. We constructed tridimensional pools from the genomic DNA of M2 plants, amplified target DNA, and subjected them to Illumina sequencing. The results were analyzed with an improved version of the mutation detection software CAMBa that accepts any pooling scheme. This small population provided a rich resource with approximately 25 mutations per queried 1.5-kb fragment, including on average four severe missense and 1.3 truncation mutations. The overall mutation density of 19.4 mutations Mb(-1) is 4 times that achieved in the corresponding diploid accession, indicating that genomic redundancy engenders tolerance to high mutation density. Polyploidization of diploids will allow the production of small populations, such as less than 2,000, that provide allelic series from knockout to mild loss of function for virtually all genes.

  20. 48 CFR 52.223-15 - Energy Efficiency in Energy-Consuming Products.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 2 2010-10-01 2010-10-01 false Energy Efficiency in... Provisions and Clauses 52.223-15 Energy Efficiency in Energy-Consuming Products. As prescribed in 23.206, insert the following clause: Energy Efficiency in Energy-Consuming Products (DEC 2007) (a) Definition. As...

  1. PRODUCTIVITY AND EFFICIENCY OF AGRICULTURAL AND NON AGRICULTURAL BANKS IN THE UNITED STATES: DEA APPROACH

    OpenAIRE

    Dias, Weeratilake

    1998-01-01

    Efficient operation of agricultural credit markets is very important both for the producer as well as for the policy makers. DEA approach is used to calculate productivity analysis which allows decomposition of sources of productivity changes into efficiency and technical change. Measured efficiencies are comparable to most recent parametric studies.

  2. Maintaining formal models of living guidelines efficiently

    NARCIS (Netherlands)

    Seyfang, Andreas; Martínez-Salvador, Begoña; Serban, Radu; Wittenberg, Jolanda; Miksch, Silvia; Marcos, Mar; Ten Teije, Annette; Rosenbrand, Kitty C J G M

    2007-01-01

    Translating clinical guidelines into formal models is beneficial in many ways, but expensive. The progress in medical knowledge requires clinical guidelines to be updated at relatively short intervals, leading to the term living guideline. This causes potentially expensive, frequent updates of the

  3. AN EFFICIENT STRUCTURAL REANALYSIS MODEL FOR ...

    African Journals Online (AJOL)

    be required if complete and exact analysis would be carried out. This paper ... qualities even under significantly large design modifications. A numerical example has been presented to show potential capabilities of theproposed model. INTRODUCTION ... equilibrium conditions in the structural system and the subsequent ...

  4. Efficient Modelling Methodology for Reconfigurable Underwater Robots

    DEFF Research Database (Denmark)

    Nielsen, Mikkel Cornelius; Blanke, Mogens; Schjølberg, Ingrid

    2016-01-01

    This paper considers the challenge of applying reconfigurable robots in an underwater environment. The main result presented is the development of a model for a system comprised of N, possibly heterogeneous, robots dynamically connected to each other and moving with 6 Degrees of Freedom (DOF). Th...

  5. A GLOBAL MODEL OF ECONOMIC EFFICIENCY

    Directory of Open Access Journals (Sweden)

    STEGĂROIU CARINA-ELENA

    2015-12-01

    Full Text Available Idea generators are the intellectual producers of scientific discoveries, but training them up is becoming increasingly more expensive every year. The training process is sustained by technology, and the conditions in which they operate. Over the last 1500 year, humanity can take credit for only around 30 intellectual discoveries. The way evolution works, changes in the human brain, the life styles, and the structure of the food products are very important: in the 16th century the human intellect experiences a „boom”. This century marks as many scientific discoveries as all of the previous years together. The next boom of the human intellect will take place in the 21st century. Ecological problems, the loss of unproductive material resources, the incurable diseases will push the „intellect” of the human society into surpassing the scientific discoveries of the 20th century.

  6. Efficient Turbulence Modeling for CFD Wake Simulations

    DEFF Research Database (Denmark)

    van der Laan, Paul

    Wind turbine wakes can cause 10-20% annual energy losses in wind farms, and wake turbulence can decrease the lifetime of wind turbine blades. One way of estimating these effects is the use of computational fluid dynamics (CFD) to simulate wind turbines wakes in the atmospheric boundary layer. Since...... this flow is in the high Reynolds number regime, it is mainly dictated by turbulence. As a result, the turbulence modeling in CFD dominates the wake characteristics, especially in Reynolds-averaged Navier-Stokes (RANS). The present work is dedicated to study and develop RANS-based turbulence models...... verified with a grid dependency study. With respect to the standard k-ε EVM, the k-ε- fp EVM compares better with measurements of the velocity deficit, especially in the near wake, which translates to improved power deficits of the first wind turbines in a row. When the CFD metholody is applied to a large...

  7. An Efficient Virtual Trachea Deformation Model

    Directory of Open Access Journals (Sweden)

    Cui Tong

    2016-01-01

    Full Text Available In this paper, we present a virtual tactile model with the physically based skeleton to simulate force and deformation between a rigid tool and the soft organ. When the virtual trachea is handled, a skeleton model suitable for interactive environments is established, which consists of ligament layers, cartilage rings and muscular bars. In this skeleton, the contact force goes through the ligament layer, and produces the load effects of the joints , which are connecting the ligament layer and cartilage rings. Due to the nonlinear shape deformation inside the local neighbourhood of a contact region, the RBF method is applied to modify the result of linear global shape deformation by adding the nonlinear effect inside. Users are able to handle the virtual trachea, and the results from the examples with the mechanical properties of the human trachea are given to demonstrate the effectiveness of the approach.

  8. Efficient Matrix Models for Relational Learning

    Science.gov (United States)

    2009-10-01

    base learners and h1:r is the ensemble learner. For example, consider the case where h1, . . . , hr are linear discriminants. The weighted vote of...a multilinear form naturally leads one to consider tensor factorization: e.g., UAV T is a special case of Tucker decomposition [129] on a 2D- tensor , a...matrix. Our five modeling choices can also be used to differentiate tensor factorizations, but the choices may be subtler for tensors than for

  9. Exploiting partial knowledge for efficient model analysis

    OpenAIRE

    Macedo, Nuno; Cunha, Alcino; Pessoa, Eduardo José Dias

    2017-01-01

    The advancement of constraint solvers and model checkers has enabled the effective analysis of high-level formal specification languages. However, these typically handle a specification in an opaque manner, amalgamating all its constraints in a single monolithic verification task, which often proves to be a performance bottleneck. This paper addresses this issue by proposing a solving strategy that exploits user-provided partial knowledge, namely by assigning symbolic bounds to the problem’s ...

  10. Efficiency in rice production : evidence from gogounou district in ...

    African Journals Online (AJOL)

    Thetechnical, allocative and economic efficiencies of rice growing in the District of Gogonou and factors determining the economic efficiency have been analysed with the help of a survey carried out among 150 rice producers randomly sampled during the agricultural year 2005-2006. The data analysis is essentially based ...

  11. Modelling the Performance of Product Integrated Photovoltaic (PIPV) Cells Indoors

    NARCIS (Netherlands)

    Apostolou, G.; Verwaal, M.; Reinders, Angelina H.M.E.

    2014-01-01

    In this paper we present a model, which have been developed for the estimation of the PV products’ cells’ performance in an indoor environment. The model computes the efficiency and power production of PV technologies, as a function of distance from natural and artificial light sources. It intents

  12. Building an Efficient Model for Afterburn Energy Release

    Energy Technology Data Exchange (ETDEWEB)

    Alves, S; Kuhl, A; Najjar, F; Tringe, J; McMichael, L; Glascoe, L

    2012-02-03

    Many explosives will release additional energy after detonation as the detonation products mix with the ambient environment. This additional energy release, referred to as afterburn, is due to combustion of undetonated fuel with ambient oxygen. While the detonation energy release occurs on a time scale of microseconds, the afterburn energy release occurs on a time scale of milliseconds with a potentially varying energy release rate depending upon the local temperature and pressure. This afterburn energy release is not accounted for in typical equations of state, such as the Jones-Wilkins-Lee (JWL) model, used for modeling the detonation of explosives. Here we construct a straightforward and efficient approach, based on experiments and theory, to account for this additional energy release in a way that is tractable for large finite element fluid-structure problems. Barometric calorimeter experiments have been executed in both nitrogen and air environments to investigate the characteristics of afterburn for C-4 and other materials. These tests, which provide pressure time histories, along with theoretical and analytical solutions provide an engineering basis for modeling afterburn with numerical hydrocodes. It is toward this end that we have constructed a modified JWL equation of state to account for afterburn effects on the response of structures to blast. The modified equation of state includes a two phase afterburn energy release to represent variations in the energy release rate and an afterburn energy cutoff to account for partial reaction of the undetonated fuel.

  13. Efficiency assessment models of higher education institution staff activity

    Directory of Open Access Journals (Sweden)

    K. A. Dyusekeyev

    2016-01-01

    Full Text Available The paper substantiates the necessity of improvement of university staff incentive system under the conditions of competition in the field of higher education, the necessity to develop a separate model for the evaluation of the effectiveness of the department heads. The authors analysed the methods for assessing production function of units. The advantage of the application of the methods to assess the effectiveness of border economic structures in the field of higher education is shown. The choice of the data envelopment analysis method to solve the problem has proved. The model for evaluating of university departments activity on the basis of the DEAmethodology has developed. On the basis of operating in Russia, Kazakhstan and other countries universities staff pay systems the structure of the criteria system for university staff activity evaluation has been designed. For clarification and specification of the departments activity efficiency criteria a strategic map has been developed that allowed us to determine the input and output parameters of the model. DEA-methodology using takes into account a large number of input and output parameters, increases the assessment objectivity by excluding experts, receives interim data to identify the strengths and weaknesses of the evaluated object.

  14. A Production Model for Deteriorating Inventory Items with Production Disruptions

    OpenAIRE

    Yong He; Ju He

    2010-01-01

    Disruption management has recently become an active area of research. In this study, an extension is made to consider the fact that some products may deteriorate during storage. A production-inventory model for deteriorating items with production disruptions is developed. Then the optimal production and inventory plans are provided, so that the manufacturer can reduce the loss caused by disruptions. Finally, a numerical example is used to illustrate the model.

  15. Model calibration for building energy efficiency simulation

    International Nuclear Information System (INIS)

    Mustafaraj, Giorgio; Marini, Dashamir; Costa, Andrea; Keane, Marcus

    2014-01-01

    Highlights: • Developing a 3D model relating to building architecture, occupancy and HVAC operation. • Two calibration stages developed, final model providing accurate results. • Using an onsite weather station for generating the weather data file in EnergyPlus. • Predicting thermal behaviour of underfloor heating, heat pump and natural ventilation. • Monthly energy saving opportunities related to heat pump of 20–27% was identified. - Abstract: This research work deals with an Environmental Research Institute (ERI) building where an underfloor heating system and natural ventilation are the main systems used to maintain comfort condition throughout 80% of the building areas. Firstly, this work involved developing a 3D model relating to building architecture, occupancy and HVAC operation. Secondly, the calibration methodology, which consists of two levels, was then applied in order to insure accuracy and reduce the likelihood of errors. To further improve the accuracy of calibration a historical weather data file related to year 2011, was created from the on-site local weather station of ERI building. After applying the second level of calibration process, the values of Mean bias Error (MBE) and Cumulative Variation of Root Mean Squared Error (CV(RMSE)) on hourly based analysis for heat pump electricity consumption varied within the following ranges: (MBE) hourly from −5.6% to 7.5% and CV(RMSE) hourly from 7.3% to 25.1%. Finally, the building was simulated with EnergyPlus to identify further possibilities of energy savings supplied by a water to water heat pump to underfloor heating system. It found that electricity consumption savings from the heat pump can vary between 20% and 27% on monthly bases

  16. Improving Global Gross Primary Productivity Estimates by Computing Optimum Light Use Efficiencies Using Flux Tower Data

    Science.gov (United States)

    Madani, Nima; Kimball, John S.; Running, Steven W.

    2017-11-01

    In the light use efficiency (LUE) approach of estimating the gross primary productivity (GPP), plant productivity is linearly related to absorbed photosynthetically active radiation assuming that plants absorb and convert solar energy into biomass within a maximum LUE (LUEmax) rate, which is assumed to vary conservatively within a given biome type. However, it has been shown that photosynthetic efficiency can vary within biomes. In this study, we used 149 global CO2 flux towers to derive the optimum LUE (LUEopt) under prevailing climate conditions for each tower location, stratified according to model training and test sites. Unlike LUEmax, LUEopt varies according to heterogeneous landscape characteristics and species traits. The LUEopt data showed large spatial variability within and between biome types, so that a simple biome classification explained only 29% of LUEopt variability over 95 global tower training sites. The use of explanatory variables in a mixed effect regression model explained 62.2% of the spatial variability in tower LUEopt data. The resulting regression model was used for global extrapolation of the LUEopt data and GPP estimation. The GPP estimated using the new LUEopt map showed significant improvement relative to global tower data, including a 15% R2 increase and 34% root-mean-square error reduction relative to baseline GPP calculations derived from biome-specific LUEmax constants. The new global LUEopt map is expected to improve the performance of LUE-based GPP algorithms for better assessment and monitoring of global terrestrial productivity and carbon dynamics.

  17. Extending product modeling methods for integrated product development

    DEFF Research Database (Denmark)

    Bonev, Martin; Wörösch, Michael; Hauksdóttir, Dagný

    2013-01-01

    Despite great efforts within the modeling domain, the majority of methods often address the uncommon design situation of an original product development. However, studies illustrate that development tasks are predominantly related to redesigning, improving, and extending already existing products...... and PVM methods, in a presented Product Requirement Development model some of the individual drawbacks of each method could be overcome. Based on the UML standard, the model enables the representation of complex hierarchical relationships in a generic product model. At the same time it uses matrix....... Updated design requirements have then to be made explicit and mapped against the existing product architecture. In this paper, existing methods are adapted and extended through linking updated requirements to suitable product models. By combining several established modeling techniques, such as the DSM...

  18. Economic Efficiency of Maize Production in Yola North Local ...

    African Journals Online (AJOL)

    user

    should include the basic nutrients necessary to meet the needs of the ... economic production and home production, often have damaging ..... economic citizens in Nigeria (Ankroyd and. Doughty, 1984). ... Nutritional Guide. University of.

  19. Production Cost Efficiency and Profitability of Abakaliki Rice in ...

    African Journals Online (AJOL)

    acer

    2014-11-17

    Nov 17, 2014 ... positive and significant effect on the total cost of rice production. They were all significant ... failure is experienced due to the flooded rice field. In addition ... for random effects on production beyond the control .... Standard error.

  20. The effect of slaughter weight on pig production efficiency

    African Journals Online (AJOL)

    Unknown

    production costs of a weaner pig, it is possible to determine an optimal ... on growth rate, feed intake, feed conversion ratio, lean meat percentage, production .... versus a classification system neglecting carcass mass is shown in Table 2.

  1. Modelling of virtual production networks

    Directory of Open Access Journals (Sweden)

    2011-03-01

    Full Text Available Nowadays many companies, especially small and medium-sized enterprises (SMEs, specialize in a limited field of production. It requires forming virtual production networks of cooperating enterprises to manufacture better, faster and cheaper. Apart from that, some production orders cannot be realized, because there is not a company of sufficient production potential. In this case the virtual production networks of cooperating companies can realize these production orders. These networks have larger production capacity and many different resources. Therefore it can realize many more production orders together than each of them separately. Such organization allows for executing high quality product. The maintenance costs of production capacity and used resources are not so high. In this paper a methodology of rapid prototyping of virtual production networks is proposed. It allows to execute production orders on time considered existing logistic constraints.

  2. An analysis of the productivity and technical efficiency of smallholder ...

    African Journals Online (AJOL)

    2017-01-01

    Jan 1, 2017 ... This study used the stochastic frontier production function to analyse the productivity and .... firm Xi is vector of inputs, andb is a vector of production function parameters. ei is an error term ..... regression equations. These are ...

  3. A Bioeconomic Foundation for the Nutrition-based Efficiency Wage Model

    DEFF Research Database (Denmark)

    Dalgaard, Carl-Johan Lars; Strulik, Holger

    . By extending the model with respect to heterogeneity in worker body size and a physiologically founded impact of body size on productivity, we demonstrate that the nutrition-based efficiency wage model is compatible with the empirical regularity that taller workers simultaneously earn higher wages and are less...

  4. Exergy efficient production, storage and distribution of solar energy

    Energy Technology Data Exchange (ETDEWEB)

    Sandnes, Bjoernar

    2003-07-01

    There are two main themes in this thesis. 1) Exergy efficient utilization of solar energy, where the introduction of alternative technologies such as photovoltaic/thermal collectors and phase change energy storage in a low temperature solar system is investigated. 2) The possibility of storing thermal energy in supercooled liquids is investigated. The introductory chapters introduce the concept of exergy, and focus on the use of solar heat as an inherently low quality source for covering low quality demands associated with space heating and hot water. The different stages of solar energy production, storage, and distribution of heat is discussed, with emphasis on exergy relevant issues. With the low temperature solar heating system as background, the introduction of some additional technologies that are investigated. A section of this thesis presents a study of a small scale PV/T collector as a possible component in a low temperature system. In another section the instrumentation that has been built for studies of full-size PV and thermal systems is described, and the possibility of using the PV unit outputs as parameters for controlling the thermal system operation is briefly discussed. It is suggested that the design of the PV/T unit in terms of whether priority should be given to electricity or heat production should be based on how consumption of high quality auxiliary energy is minimized, and not on adding up the combined exergy which is being produced. Solar combisystems require larger heat storage capacities compared to the more common solar hot water systems. Increased volumetric heat storage capacity can be achieved by latent heat storage systems where thermal energy is stored as heat of fusion in phase change materials (PCMs). A section presents a study where spherically encapsulated PCM is incorporated in a solar heat store. Solar combisystems are often complex, and have a relatively large number of interacting components. Another section describes a

  5. Resource use efficiency in small-scale rice production in Nigeria ...

    African Journals Online (AJOL)

    The production function for rice, elasticity of production, return to scale, marginal productivity and level of efficiency of inputs used in rice production were determined. ... With the exception of fertilizer that was over-utilized, all other inputs were underutilized with ratios of marginal value products to unit prices greater than unity ...

  6. Frontier models for evaluating environmental efficiency: an overview

    NARCIS (Netherlands)

    Oude Lansink, A.G.J.M.; Wall, A.

    2014-01-01

    Our aim in this paper is to provide a succinct overview of frontier-based models used to evaluate environmental efficiency, with a special emphasis on agricultural activity. We begin by providing a brief, up-to-date review of the main approaches used to measure environmental efficiency, with

  7. Resource-Use Efficiency in Rice Production Under Small Scale ...

    African Journals Online (AJOL)

    acer

    specific objectives of the study were to determine resource use efficiency, describe ... economic level. ... this key variable with a view to stepping ... focused on small-scale irrigation systems for ... farmers were assumed to be operating under.

  8. Productive efficiency of tea industry: A stochastic frontier approach

    African Journals Online (AJOL)

    USER

    2010-06-21

    Jun 21, 2010 ... Key words: Technical efficiency, stochastic frontier, translog ... present low performance of the tea industry in Bangladesh. ... The Technical inefficiency effect .... administrative, technical, clerical, sales and purchase staff.

  9. Maximum herd efficiency in meat production II. The influence of ...

    African Journals Online (AJOL)

    surface in terms of plots of total efficiency against percentages of mature body .... Dickerson (1978) shows that, for cattle and sheep, the energy .... protein metabolism. ... metric slope b is a scale-free parameter is convenient and .... Simulation.

  10. Eco-efficiency analysis methodology on the example of the chosen polyolefins production

    OpenAIRE

    K. Czaplicka-Kolarz; D. Burchart-Korol; P. Krawczyk

    2010-01-01

    the chosen polyolefins production. The article presents also main tools of eco-efficiency analysis: Life Cycle Assessment (LCA) and Net Present Value (NPV).Design/methodology/approach: On the basis of LCA and NPV of high density polyethylene (HDPE) and low density polyethylene (LDPE) production, eco-efficiency analysis is conducted.Findings: In this article environmental and economic performance of the chosen polyolefins production was presented. The basis phases of eco-efficiency methodology...

  11. Total Factor Productivity Growth, Technical Progress & Efficiency Change in Vietnam Coal Industry - Nonparametric Approach

    Science.gov (United States)

    Phuong, Vu Hung

    2018-03-01

    This research applies Data Envelopment Analysis (DEA) approach to analyze Total Factor Productivity (TFP) and efficiency changes in Vietnam coal mining industry from 2007 to 2013. The TFP of Vietnam coal mining companies decreased due to slow technological progress and unimproved efficiency. The decadence of technical efficiency in many enterprises proved that the coal mining industry has a large potential to increase productivity through technical efficiency improvement. Enhancing human resource training, technology and research & development investment could help the industry to improve efficiency and productivity in Vietnam coal mining industry.

  12. A Causal Model of Faculty Research Productivity.

    Science.gov (United States)

    Bean, John P.

    A causal model of faculty research productivity was developed through a survey of the literature. Models of organizational behavior, organizational effectiveness, and motivation were synthesized into a causal model of productivity. Two general types of variables were assumed to affect individual research productivity: institutional variables and…

  13. The role of empowering organization capabilities on efficiency of new product development

    Directory of Open Access Journals (Sweden)

    Hoda Nikakhtar

    2014-03-01

    Full Text Available This paper presents an empirical investigation on the effects of empowering organizational capabilities on new product-development efficiency improvement and the proposed study is applied in one of Iranian food producers in city of Tehran, Iran. The study considers seven components including technological capabilities, marketing mix capabilities, capabilities for communication with customers, quality of new products, fast entry to market capabilities, customer satisfaction and economic success. The study designs a questionnaire in Likert scale and distributes it among 384 randomly selected people who regularly use different food products. Cronbach alphas for all components of the survey are within acceptable limits and it confirms the overall questionnaire in terms of various questions. The study has used t-student test as well as structural equation modeling to examine different hypotheses of the survey.

  14. Urban eco-efficiency and system dynamics modelling

    Energy Technology Data Exchange (ETDEWEB)

    Hradil, P., Email: petr.hradil@vtt.fi

    2012-06-15

    Assessment of urban development is generally based on static models of economic, social or environmental impacts. More advanced dynamic models have been used mostly for prediction of population and employment changes as well as for other macro-economic issues. This feasibility study was arranged to test the potential of system dynamic modelling in assessing eco-efficiency changes during urban development. (orig.)

  15. Ozonolysis of Model Olefins-Efficiency of Antiozonants

    NARCIS (Netherlands)

    Huntink, N.M.; Datta, Rabin; Talma, Auke; Noordermeer, Jacobus W.M.

    2006-01-01

    In this study, the efficiency of several potential long lasting antiozonants was studied by ozonolysis of model olefins. 2-Methyl-2-pentene was selected as a model for natural rubber (NR) and 5-phenyl-2-hexene as a model for styrene butadiene rubber (SBR). A comparison was made between the

  16. The effectiveness and efficiency of model driven game design

    NARCIS (Netherlands)

    Dormans, Joris

    2012-01-01

    In order for techniques from Model Driven Engineering to be accepted at large by the game industry, it is critical that the effectiveness and efficiency of these techniques are proven for game development. There is no lack of game design models, but there is no model that has surfaced as an industry

  17. SWEET CORN FARMING: THE EFFECT OF PRODUCTION FACTOR, EFFICIENCY AND RETURN TO SCALE

    Directory of Open Access Journals (Sweden)

    Dwijatenaya I.B.M.A.

    2017-10-01

    Full Text Available This research aims to determine the effect of production factors on the sweet corn production, the efficiency of sweet corn farming, and the return to scale of sweet corn production. The sampling technique was taken by proportionate stratified random sampling method with the sample number of 57 people while the analyzer used was the program of Frointer 4.1c. The results show that the production factors of the land farm, seed, and fertilizer have a positive and significant effect on sweet corn production. On the other hand, labor production factors have a positive but not significant effect on sweet corn production. It also found that technical efficiency, price efficiency, and economic efficiency of sweet corn farming in Muara Wis Sub-district of Kutai Kartanegara Regency are not efficient yet. The return to scale of sweet corn yield has an increasing return to scale condition.

  18. Efficient Work Team Scheduling: Using Psychological Models of Knowledge Retention to Improve Code Writing Efficiency

    Directory of Open Access Journals (Sweden)

    Michael J. Pelosi

    2014-12-01

    Full Text Available Development teams and programmers must retain critical information about their work during work intervals and gaps in order to improve future performance when work resumes. Despite time lapses, project managers want to maximize coding efficiency and effectiveness. By developing a mathematically justified, practically useful, and computationally tractable quantitative and cognitive model of learning and memory retention, this study establishes calculations designed to maximize scheduling payoff and optimize developer efficiency and effectiveness.

  19. Overview and theory relating to the concepts of competitiveness, efficiency and productivity

    OpenAIRE

    Latruffe, Laure

    2017-01-01

    This is a brief overview and theory relating to the concepts of competitiveness, efficiency and productivity: concept of competitiveness, measurement of competitiveness, determinants of competitiveness.

  20. Relationships of efficiency to reproductive disorders in Danish milk production: a stochastic frontier analysis.

    Science.gov (United States)

    Lawson, L G; Bruun, J; Coelli, T; Agger, J F; Lund, M

    2004-01-01

    Relationships of various reproductive disorders and milk production performance of Danish dairy farms were investigated. A stochastic frontier production function was estimated using data collected in 1998 from 514 Danish dairy farms. Measures of farm-level milk production efficiency relative to this production frontier were obtained, and relationships between milk production efficiency and the incidence risk of reproductive disorders were examined. There were moderate positive relationships between milk production efficiency and retained placenta, induction of estrus, uterine infections, ovarian cysts, and induction of birth. Inclusion of reproductive management variables showed that these moderate relationships disappeared, but directions of coefficients for almost all those variables remained the same. Dystocia showed a weak negative correlation with milk production efficiency. Farms that were mainly managed by young farmers had the highest average efficiency scores. The estimated milk losses due to inefficiency averaged 1142, 488, and 256 kg of energy-corrected milk per cow, respectively, for low-, medium-, and high-efficiency herds. It is concluded that the availability of younger cows, which enabled farmers to replace cows with reproductive disorders, contributed to high cow productivity in efficient farms. Thus, a high replacement rate more than compensates for the possible negative effect of reproductive disorders. The use of frontier production and efficiency/inefficiency functions to analyze herd data may enable dairy advisors to identify inefficient herds and to simulate the effect of alternative management procedures on the individual herd's efficiency.

  1. Efficiancy of hydrogen peroxide for cleaning production areas and equipments in the radiopharmaceutical production

    Energy Technology Data Exchange (ETDEWEB)

    Baptista, Tatyana S.; Batista, Vanessa; Gomes, Antonio; Matsuda, Margareth; Fukumori, Neuza; Araujo, Elaine B. de, E-mail: tsbaptista@ipen.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2013-07-01

    A great challenge in the radiopharmaceuticals production is to fulfill the Good Manufacturing Practices (GMPs), involving the validation of process and of all supporting activities such as cleaning and sanitization. The increasingly strict requirements for quality assurance system, with several norms and normative resolutions has led to a constant concern with programs and cleaning validation in pharmaceutical production. The main goal of GMP is to reduce risks inherent to pharmaceutical production, that is to reduce product contamination with microorganisms and cross-contamination. The basic requirements to prevent contamination is the development and implementation of efficient cleaning programs. In the case of clean rooms for the production of injectable radiopharmaceuticals, the requirement for cleaning programs is evidently higher due to the characteristics of these areas with hot cells for radioactive materials, where sterile radiopharmaceuticals are manipulated and distributed before administration to patients just after minutes or hours of its preparation. In the Radiopharmacy Department at IPEN it was established a cleaning program for clean rooms and hot cells using a hydrogen peroxide solution (20% proxitane alfa). The objective of this work was to assess effectiveness of this cleaning agent in reducing and/or eliminating microbial load in the clean rooms and equipment to acceptable levels in accordance with the current legislation. The analysis was conducted using results of the environmental monitoring program with and settling contact plates in clean rooms after the cleaning procedures. Furthermore, it was possible to evaluate the action of the sanitizing agent on the microbial population on the surface of equipment and clean rooms. It was also evaluated the best way to accomplish the cleaning program considering the dosimetric factor in each production process, as the main concern of pharmaceutical companies is the microbiological contamination, in

  2. Efficiancy of hydrogen peroxide for cleaning production areas and equipments in the radiopharmaceutical production

    International Nuclear Information System (INIS)

    Baptista, Tatyana S.; Batista, Vanessa; Gomes, Antonio; Matsuda, Margareth; Fukumori, Neuza; Araujo, Elaine B. de

    2013-01-01

    A great challenge in the radiopharmaceuticals production is to fulfill the Good Manufacturing Practices (GMPs), involving the validation of process and of all supporting activities such as cleaning and sanitization. The increasingly strict requirements for quality assurance system, with several norms and normative resolutions has led to a constant concern with programs and cleaning validation in pharmaceutical production. The main goal of GMP is to reduce risks inherent to pharmaceutical production, that is to reduce product contamination with microorganisms and cross-contamination. The basic requirements to prevent contamination is the development and implementation of efficient cleaning programs. In the case of clean rooms for the production of injectable radiopharmaceuticals, the requirement for cleaning programs is evidently higher due to the characteristics of these areas with hot cells for radioactive materials, where sterile radiopharmaceuticals are manipulated and distributed before administration to patients just after minutes or hours of its preparation. In the Radiopharmacy Department at IPEN it was established a cleaning program for clean rooms and hot cells using a hydrogen peroxide solution (20% proxitane alfa). The objective of this work was to assess effectiveness of this cleaning agent in reducing and/or eliminating microbial load in the clean rooms and equipment to acceptable levels in accordance with the current legislation. The analysis was conducted using results of the environmental monitoring program with and settling contact plates in clean rooms after the cleaning procedures. Furthermore, it was possible to evaluate the action of the sanitizing agent on the microbial population on the surface of equipment and clean rooms. It was also evaluated the best way to accomplish the cleaning program considering the dosimetric factor in each production process, as the main concern of pharmaceutical companies is the microbiological contamination, in

  3. Evaluating Energy Efficiency Policies with Energy-Economy Models

    Energy Technology Data Exchange (ETDEWEB)

    Mundaca, Luis; Neij, Lena; Worrell, Ernst; McNeil, Michael A.

    2010-08-01

    The growing complexities of energy systems, environmental problems and technology markets are driving and testing most energy-economy models to their limits. To further advance bottom-up models from a multidisciplinary energy efficiency policy evaluation perspective, we review and critically analyse bottom-up energy-economy models and corresponding evaluation studies on energy efficiency policies to induce technological change. We use the household sector as a case study. Our analysis focuses on decision frameworks for technology choice, type of evaluation being carried out, treatment of market and behavioural failures, evaluated policy instruments, and key determinants used to mimic policy instruments. Although the review confirms criticism related to energy-economy models (e.g. unrealistic representation of decision-making by consumers when choosing technologies), they provide valuable guidance for policy evaluation related to energy efficiency. Different areas to further advance models remain open, particularly related to modelling issues, techno-economic and environmental aspects, behavioural determinants, and policy considerations.

  4. A non-parametric Data Envelopment Analysis approach for improving energy efficiency of grape production

    International Nuclear Information System (INIS)

    Khoshroo, Alireza; Mulwa, Richard; Emrouznejad, Ali; Arabi, Behrouz

    2013-01-01

    Grape is one of the world's largest fruit crops with approximately 67.5 million tonnes produced each year and energy is an important element in modern grape productions as it heavily depends on fossil and other energy resources. Efficient use of these energies is a necessary step toward reducing environmental hazards, preventing destruction of natural resources and ensuring agricultural sustainability. Hence, identifying excessive use of energy as well as reducing energy resources is the main focus of this paper to optimize energy consumption in grape production. In this study we use a two-stage methodology to find the association of energy efficiency and performance explained by farmers' specific characteristics. In the first stage a non-parametric Data Envelopment Analysis is used to model efficiencies as an explicit function of human labor, machinery, chemicals, FYM (farmyard manure), diesel fuel, electricity and water for irrigation energies. In the second step, farm specific variables such as farmers' age, gender, level of education and agricultural experience are used in a Tobit regression framework to explain how these factors influence efficiency of grape farming. The result of the first stage shows substantial inefficiency between the grape producers in the studied area while the second stage shows that the main difference between efficient and inefficient farmers was in the use of chemicals, diesel fuel and water for irrigation. The use of chemicals such as insecticides, herbicides and fungicides were considerably less than inefficient ones. The results revealed that the more educated farmers are more energy efficient in comparison with their less educated counterparts. - Highlights: • The focus of this paper is to identify excessive use of energy and optimize energy consumption in grape production. • We measure the efficiency as a function of labor/machinery/chemicals/farmyard manure/diesel-fuel/electricity/water. • Data were obtained from 41 grape

  5. Alignment of Product Models and Product State Models - Integration of the Product Lifecycle Phases

    DEFF Research Database (Denmark)

    Larsen, Michael Holm; Kirkby, Lars Phillip; Vesterager, Johan

    1999-01-01

    The purpose of this paper is to discuss the integration of the Product Model (PM) and the Product State Model (PCM). Focus is on information exchange from the PSM to the PM within the manufacturing of a single ship. The paper distinguishes between information and knowledge integration. The paper ...... provides some overall strategies for integrating PM and PSM. The context of this discussion is a development project at Odense Steel Shipyard....

  6. Methodical Approach to Diagnostics of Efficiency of Production Economic Activity of an Enterprise

    Directory of Open Access Journals (Sweden)

    Zhukov Andrii V.

    2014-03-01

    Full Text Available The article offers developments of a methodical approach to diagnostics of efficiency of production economic activity of an enterprise, which, unlike the existing ones, is realised through the following stages: analysis of the enterprise external environment; analysis of the enterprise internal environment; identification of components of efficiency of production economic activity for carrying out complex diagnostics by the following directions: efficiency of subsystems of the enterprise production economic activity, efficiency of use of separate types of resources and socio-economic efficiency; scorecard formation; study of tendencies of change of indicators; identification of cause-effect dependencies between the main components of efficiency for diagnosing reasons of its level; diagnosing deviations of indicator values from their optimal values; development of a managerial decision on preserving and increasing efficiency of production economic activity of the enterprise.

  7. Energy management for cost reduction in the production. TEEM - Total Energy Efficiency Management; Energiemanagement zur Kostensenkung in der Produktion. TEEM - Total Energy Efficiency Management

    Energy Technology Data Exchange (ETDEWEB)

    Westkaemper, Engelbert; Verl, Alexander (eds.)

    2009-07-01

    Within the workshop of the Fraunhofer Institute for Manufacturing Engineering and Automation IPA (Stuttgart, Federal Republic of Germany) at 6th October, 2009, in Stuttgart the following lectures were held: (1) Presentation of Fraunhofer Institute for Manufacturing Engineering and Automation IPA (Engelbert Westkaemper); (2) TEEM - Total Energy Efficiency Management - ''With energy management to an energy efficient production'' (Alexander Schloske); (3) DIN EN 16001 Introduction of an energy management system - utilization and advantages for companies (Sylvia Wahren); (4) Analysis of the energy efficiency with power flow - Support and implementation at factory planning and optimization of production (Klaus Erlach); (5) Total Energy Efficiency Management - Approaches at the company Kaercher in injection moulding for example (Axel Leschtar); (6) Modelling the embodied product energy (Shahin Rahimifard); (7) Acquisition of energy data in the production - Technologies and possibilities (Joachim Neher); (8) Active energy management by means of an ''energy control centre'' - Analysis of the real situation and upgrading measures in the production using coating plants as an example (Wolfgang Klein); (9) Visualisation and simulation of energy values in the digital factory (Carmen Constantinescu, Axel Bruns).

  8. Modeling of Methods to Control Heat-Consumption Efficiency

    Science.gov (United States)

    Tsynaeva, E. A.; Tsynaeva, A. A.

    2016-11-01

    In this work, consideration has been given to thermophysical processes in automated heat consumption control systems (AHCCSs) of buildings, flow diagrams of these systems, and mathematical models describing the thermophysical processes during the systems' operation; an analysis of adequacy of the mathematical models has been presented. A comparison has been made of the operating efficiency of the systems and the methods to control the efficiency. It has been determined that the operating efficiency of an AHCCS depends on its diagram and the temperature chart of central quality control (CQC) and also on the temperature of a low-grade heat source for the system with a heat pump.

  9. Measuring Efficiency of Knowledge Production in Health Research Centers Using Data Envelopment Analysis (DEA): A Case Study in Iran.

    Science.gov (United States)

    Amiri, Mohammad Meskarpour; Nasiri, Taha; Saadat, Seyed Hassan; Anabad, Hosein Amini; Ardakan, Payman Mahboobi

    2016-11-01

    Efficiency analysis is necessary in order to avoid waste of materials, energy, effort, money, and time during scientific research. Therefore, analyzing efficiency of knowledge production in health areas is necessary, especially for developing and in-transition countries. As the first step in this field, the aim of this study was the analysis of selected health research center efficiency using data envelopment analysis (DEA). This retrospective and applied study was conducted in 2015 using input and output data of 16 health research centers affiliated with a health sciences university in Iran during 2010-2014. The technical efficiency of health research centers was evaluated based on three basic data envelopment analysis (DEA) models: input-oriented, output-oriented, and hyperbolic-oriented. The input and output data of each health research center for years 2010-2014 were collected from the Iran Ministry of Health and Medical Education (MOHE) profile and analyzed by R software. The mean efficiency score in input-oriented, output-oriented, and hyperbolic-oriented models was 0.781, 0.671, and 0.798, respectively. Based on results of the study, half of the health research centers are operating below full efficiency, and about one-third of them are operating under the average efficiency level. There is also a large gap between health research center efficiency relative to each other. It is necessary for health research centers to improve their efficiency in knowledge production through better management of available resources. The higher level of efficiency in a significant number of health research centers is achievable through more efficient management of human resources and capital. Further research is needed to measure and follow the efficiency of knowledge production by health research centers around the world and over a period of time.

  10. Efficiency and productivity terms for water management: A matter of contextual relativism versus general absolutism

    NARCIS (Netherlands)

    Halsema, van G.E.; Vincent, L.F.

    2012-01-01

    Growing water scarcity and increasing demands for agricultural products generate much debate about improving the agricultural sector's water use efficiency and productivity. Agricultural engineering traditions feed this debate with notions such as agricultural yield gaps and low water use

  11. Kanban simulation model for production process optimization

    Directory of Open Access Journals (Sweden)

    Golchev Riste

    2015-01-01

    Full Text Available A long time has passed since the KANBAN system has been established as an efficient method for coping with the excessive inventory. Still, the possibilities for its improvement through its integration with other different approaches should be investigated further. The basic research challenge of this paper is to present benefits of KANBAN implementation supported with Discrete Event Simulation (DES. In that direction, at the beginning, the basics of KANBAN system are presented with emphasis on the information and material flow, together with a methodology for implementation of KANBAN system. Certain analysis on combining the simulation with this methodology is presented. The paper is concluded with a practical example which shows that through understanding the philosophy of the implementation methodology of KANBAN system and the simulation methodology, a simulation model can be created which can serve as a basis for a variety of experiments that can be conducted within a short period of time, resulting with production process optimization.

  12. Computationally efficient models of neuromuscular recruitment and mechanics.

    Science.gov (United States)

    Song, D; Raphael, G; Lan, N; Loeb, G E

    2008-06-01

    We have improved the stability and computational efficiency of a physiologically realistic, virtual muscle (VM 3.*) model (Cheng et al 2000 J. Neurosci. Methods 101 117-30) by a simpler structure of lumped fiber types and a novel recruitment algorithm. In the new version (VM 4.0), the mathematical equations are reformulated into state-space representation and structured into a CMEX S-function in SIMULINK. A continuous recruitment scheme approximates the discrete recruitment of slow and fast motor units under physiological conditions. This makes it possible to predict force output during smooth recruitment and derecruitment without having to simulate explicitly a large number of independently recruited units. We removed the intermediate state variable, effective length (Leff), which had been introduced to model the delayed length dependency of the activation-frequency relationship, but which had little effect and could introduce instability under physiological conditions of use. Both of these changes greatly reduce the number of state variables with little loss of accuracy compared to the original VM. The performance of VM 4.0 was validated by comparison with VM 3.1.5 for both single-muscle force production and a multi-joint task. The improved VM 4.0 model is more suitable for the analysis of neural control of movements and for design of prosthetic systems to restore lost or impaired motor functions. VM 4.0 is available via the internet and includes options to use the original VM model, which remains useful for detailed simulations of single motor unit behavior.

  13. Computationally efficient models of neuromuscular recruitment and mechanics

    Science.gov (United States)

    Song, D.; Raphael, G.; Lan, N.; Loeb, G. E.

    2008-06-01

    We have improved the stability and computational efficiency of a physiologically realistic, virtual muscle (VM 3.*) model (Cheng et al 2000 J. Neurosci. Methods 101 117-30) by a simpler structure of lumped fiber types and a novel recruitment algorithm. In the new version (VM 4.0), the mathematical equations are reformulated into state-space representation and structured into a CMEX S-function in SIMULINK. A continuous recruitment scheme approximates the discrete recruitment of slow and fast motor units under physiological conditions. This makes it possible to predict force output during smooth recruitment and derecruitment without having to simulate explicitly a large number of independently recruited units. We removed the intermediate state variable, effective length (Leff), which had been introduced to model the delayed length dependency of the activation-frequency relationship, but which had little effect and could introduce instability under physiological conditions of use. Both of these changes greatly reduce the number of state variables with little loss of accuracy compared to the original VM. The performance of VM 4.0 was validated by comparison with VM 3.1.5 for both single-muscle force production and a multi-joint task. The improved VM 4.0 model is more suitable for the analysis of neural control of movements and for design of prosthetic systems to restore lost or impaired motor functions. VM 4.0 is available via the internet and includes options to use the original VM model, which remains useful for detailed simulations of single motor unit behavior.

  14. Resources Use Efficiency In Food Crop Production In Ekiti State ...

    African Journals Online (AJOL)

    Marginal value productivity of resources were computed and compared with the acquisition/prices of these resources. Result of regression analysis indicates that farm size, fertilizer and purchased inputs were significant inputs that accounted for variation in the output of food crops. The Marginal Value Product (MVP) of all ...

  15. A resource efficiency assessment of the industrial mushroom production chain

    NARCIS (Netherlands)

    Zisopoulos, Filippos K.; Becerra Ramírez, Henry A.; Goot, van der Atze Jan; Boom, Remko M.

    2016-01-01

    We compare the exergetic performance of a conventional industrial mushroom production chain with a mushroom production chain where part of the compost waste is recycled and reused as raw material. The critical exergy loss points (CEPs) identified are the cooking-out process of the spent mushroom

  16. Ranking production units according to marginal efficiency contribution

    DEFF Research Database (Denmark)

    Ghiyasi, Mojtaba; Hougaard, Jens Leth

    League tables associated with various forms of service activities from schools to hospitals illustrate the public need for ranking institutions by their productive performance. We present a new method for ranking production units which is based on each units marginal contribution to the technical...

  17. Nitrogen and Phosphorus Use Efficiencies in Dairy Production in China

    NARCIS (Netherlands)

    Bai, Z.H.; Ma, L.; Oenema, O.; Chen, Q.; Zhang, F.S.

    2013-01-01

    Milk production has greatly increased in China recently, with significant impacts on the cycling of nitrogen (N) and phosphorus (P). However, nutrient flows within the changing dairy production system are not well quantified. The aim of this study was to increase the quantitative understanding of N

  18. Future consequences of decreasing marginal production efficiency in the high-yielding dairy cow.

    Science.gov (United States)

    Moallem, U

    2016-04-01

    The objectives were to examine the gross and marginal production efficiencies in high-yielding dairy cows and the future consequences on dairy industry profitability. Data from 2 experiments were used in across-treatments analysis (n=82 mid-lactation multiparous Israeli-Holstein dairy cows). Milk yields, body weights (BW), and dry matter intakes (DMI) were recorded daily. In both experiments, cows were fed a diet containing 16.5 to 16.6% crude protein and net energy for lactation (NEL) at 1.61 Mcal/kg of dry matter (DM). The means of milk yield, BW, DMI, NEL intake, and energy required for maintenance were calculated individually over the whole study, and used to calculate gross and marginal efficiencies. Data were analyzed in 2 ways: (1) simple correlation between variables; and (2) cows were divided into 3 subgroups, designated low, moderate, and high DMI (LDMI, MDMI, and HDMI), according to actual DMI per day: ≤ 26 kg (n=27); >26 through 28.2 kg (n=28); and >28.2 kg (n=27). The phenotypic Pearson correlations among variables were analyzed, and the GLM procedure was used to test differences between subgroups. The relationships between milk and fat-corrected milk yields and the corresponding gross efficiencies were positive, whereas BW and gross production efficiency were negatively correlated. The marginal production efficiency from DM and energy consumed decreased with increasing DMI. The difference between BW gain as predicted by the National Research Council model (2001) and the present measurements increased with increasing DMI (r=0.68). The average calculated energy balances were 1.38, 2.28, and 4.20 Mcal/d (standard error of the mean=0.64) in the LDMI, MDMI, and HDMI groups, respectively. The marginal efficiency for milk yields from DMI or energy consumed was highest in LDMI, intermediate in MDMI, and lowest in HDMI. The predicted BW gains for the whole study period were 22.9, 37.9, and 75.8 kg for the LDMI, MDMI, and HDMI groups, respectively. The

  19. Buy Energy-Efficient Products: A Guide for Federal Purchasers and Specifiers

    Energy Technology Data Exchange (ETDEWEB)

    2016-07-01

    In a single year, energy-efficient product purchases could save the federal government almost a half billion dollars worth of energy. By purchasing products that exceed the minimum required efficiency levels, buyers can save the government even more energy and money. Federal employees and contractors must take an active role in ensuring that the government receives products that meet efficiency requirements. This document provides an overview of product purchasing requirements and shows you how to write compliant contracts, find funding, and confirm product compliance.

  20. Measuring Eco-efficiency of Production with Data Envelopment Analysis

    NARCIS (Netherlands)

    Kuosmanen, T.K.; Kortelainen, M.

    2005-01-01

    Aggregation of environmental pressures into a single environmental damage index is a major challenge of eco-efficiency measurement. This article examines how the data envelopment analysis (DEA) method can be adapted for this purpose. DEA accounts for substitution possibilities between different

  1. Biomass production and water use efficiency of grassland in ...

    African Journals Online (AJOL)

    Using the results from a long-term grazing trial in the Dry Highland Sourveld of the KwaZulu-Natal province, we prepared a water use efficiency value (the ratio of the increment in annual biomass to total annual evapotranspiration) for this rangeland type. Using seasonal biomass measurements recorded between March ...

  2. Productive Efficiency of Small Scale Sawmilling Industries in Mufindi ...

    African Journals Online (AJOL)

    A structured questionnaire was used to collect data from 80 small-scale sawmills in Mufindi District. Data were analysed using descriptive as well as quantitative methods. Technical, scale and allocative efficiency score of sawmills were computed using data envelopment analysis programme developed by Coelli. Censored ...

  3. Assessing the Economic Efficiency of Maize Production in Northern ...

    African Journals Online (AJOL)

    2017-05-01

    May 1, 2017 ... successes of the green revolution in Asia brought to the fore agriculture's ... Maize is a very important staple food in Ghana accounting for more than 50% of total .... The cost efficiency function is specified by changing the error from the to ..... A Guide to Frontier Version 4.1: A computer program for Frontier.

  4. Effect Of Credit Constraint On Production Efficiency Of Farm ...

    African Journals Online (AJOL)

    Credit constraint in agriculture affects not only the purchasing power of producers to procure farm inputs and to cover operating costs in the short run, but also their capacity to make farm-related investments as well as risk behavior in technology choice and adoption. These, in turn, influence technical efficiencies of the ...

  5. Energy Efficiency, Building Productivity and the Commercial Buildings Market

    Energy Technology Data Exchange (ETDEWEB)

    Jones, D.W.

    2002-05-16

    The energy-efficiency gap literature suggests that building buyers are often short-sighted in their failure to apply life-cycle costing principles to energy efficient building technologies, with the result that under investment in these advanced technology occurs. This study examines the reasons this behavior may occur, by analyzing the pressures that market forces place on purchasers of buildings. Our basic conclusion is that the fundamental manner in which the buildings sector does business creates pressures to reduce initial capital outlays and to hedge against a variety of risks, including the ability of building owners to capture benefits from energy efficiency. Starting from the position that building buyers' willingness to pay drives choices over building attributes, we examine basic market principles, the structure of the buildings market, including the role of lenders, and policies that promote penetration of energy efficient technologies. We conclude that greater attention to buyers, and to the incentives and constraints they face, would promote a better understanding of building investment choices and contribute to better policies to promote the penetration of these technologies into markets.

  6. Cassava productivity linked to potassium's influence on water use efficiency

    NARCIS (Netherlands)

    Ezui, K.S.; Franke, A.C.; Leffelaar, P.A.; Giller, K.E.

    2017-01-01

    This paper presents the results of field studies conducted in Togo (Djakakope and Sevekpota) to assess the effect of potassium (K) on cassava yield, water use efficiency (WUE) and transpiration as affected by nitrogen (N) and phosphorus (P) availability under rainfed conditions. It was shown that an

  7. Energy efficiency optimisation for distillation column using artificial neural network models

    International Nuclear Information System (INIS)

    Osuolale, Funmilayo N.; Zhang, Jie

    2016-01-01

    This paper presents a neural network based strategy for the modelling and optimisation of energy efficiency in distillation columns incorporating the second law of thermodynamics. Real-time optimisation of distillation columns based on mechanistic models is often infeasible due to the effort in model development and the large computation effort associated with mechanistic model computation. This issue can be addressed by using neural network models which can be quickly developed from process operation data. The computation time in neural network model evaluation is very short making them ideal for real-time optimisation. Bootstrap aggregated neural networks are used in this study for enhanced model accuracy and reliability. Aspen HYSYS is used for the simulation of the distillation systems. Neural network models for exergy efficiency and product compositions are developed from simulated process operation data and are used to maximise exergy efficiency while satisfying products qualities constraints. Applications to binary systems of methanol-water and benzene-toluene separations culminate in a reduction of utility consumption of 8.2% and 28.2% respectively. Application to multi-component separation columns also demonstrate the effectiveness of the proposed method with a 32.4% improvement in the exergy efficiency. - Highlights: • Neural networks can accurately model exergy efficiency in distillation columns. • Bootstrap aggregated neural network offers improved model prediction accuracy. • Improved exergy efficiency is obtained through model based optimisation. • Reductions of utility consumption by 8.2% and 28.2% were achieved for binary systems. • The exergy efficiency for multi-component distillation is increased by 32.4%.

  8. SOWING GRASSLANDS – EFFICIENT SOLUTION FOR ZOOTEHNICAL PRODUCTION

    Directory of Open Access Journals (Sweden)

    VALENTINA OFELIA ROBESCU

    2008-05-01

    Full Text Available Recruitment is critical for the maintenance of plant populations and community diversity, but sexual regeneration is considered to be infrequent in climatically harsh habitats such as sub alpine grasslands. For this reasons it is very important to improve the grassland. In this paper we study the interaction among milk production, fertilizations and flower composition in sub alpine grasslands. The agrochemical indicators are important because they influence the pasture value and at the final the milk production.

  9. Crop and soil specific N and P efficiency and productivity in Finland

    NARCIS (Netherlands)

    Bäckman, S.; Oude Lansink, A.G.J.M.

    2005-01-01

    This paper estimates a stochastic production frontier based on experimental data of cereals production in Finland over the period 1977-1994. The estimates of the production frontier are used to analyze nitrogen and phosphorous productivity and efficiency differences between soils and crops. For this

  10. Strategies for improving water use efficiency in livestock feed production in rain-fed systems

    NARCIS (Netherlands)

    Kebebe, E.G.; Oosting, S.J.; Haileslassie, A.; Duncan, A.J.; Boer, de I.J.M.

    2015-01-01

    Livestock production is a major consumer of fresh water, and the influence of livestock production on global fresh water resources is increasing because of the growing demand for livestock products. Increasing water use efficiency of livestock production, therefore, can contribute to the overall

  11. India's Fertilizer Industry: Productivity and Energy Efficiency

    Energy Technology Data Exchange (ETDEWEB)

    Schumacher, K.; Sathaye, J.

    1999-07-01

    Historical estimates of productivity growth in India's fertilizer sector vary from indicating an improvement to a decline in the sector's productivity. The variance may be traced to the time period of study, source of data for analysis, and type of indices and econometric specifications used for reporting productivity growth. Our analysis shows that in the twenty year period, 1973 to 1993, productivity in the fertilizer sector increased by 2.3% per annum. An econometric analysis reveals that technical progress in India's fertilizer sector has been biased towards the use of energy, while it has been capital and labor saving. The increase in productivity took place during the era of total control when a retention price system and distribution control was in effect. With liberalization of the fertilizer sector and reduction of subsidies productivity declined substantially since the early 1990s. Industrial policies and fiscal incentives still play a major role in the Indian fertilizer sect or. As substantial energy savings and carbon reduction potential exists, energy policies can help overcome barriers to the adoption of these measures in giving proper incentives and correcting distorted prices.

  12. A procedure for building product models

    DEFF Research Database (Denmark)

    Hvam, Lars; Riis, Jesper; Malis, Martin

    2001-01-01

    This article presents a procedure for building product models to support the specification processes dealing with sales, design of product variants and production preparation. The procedure includes, as the first phase, an analysis and redesign of the business processes, which are to be supported...... with product models. The next phase includes an analysis of the product assortment, and the set up of a so-called product master. Finally the product model is designed and implemented using object oriented modelling. The procedure is developed in order to ensure that the product models constructed are fit...... for the business processes they support, and properly structured and documented, in order to facilitate that the systems can be maintained continually and further developed. The research has been carried out at the Centre for Industrialisation of Engineering, Department of Manufacturing Engineering, Technical...

  13. Total Factor Productivity and Efficiency Analysis on Islamic Banks in Indonesia

    Directory of Open Access Journals (Sweden)

    Siti Aisyah

    2018-02-01

    Full Text Available The aims of this study are to measure productivity and efficiency, to analyze factors which affect the level of efficiency and to analyze correlation between productivity and efficiency of Islamic Banking in Indonesia. The objects of this study are 11 (eleven Islamic Banks (BUS in Indonesia which are analyzed from the second quarter of 2010 to the third quarter of 2015. The result shows only six of the eleven banks that have a good productivity levels, otherwise for efficiency there are only three banks that efficient enough. Furthermore, the relationship between productivity and efficiency levels that are categorized into 4 (four quadrants. In quadrant I, three banks have high productivity and efficiency namely Syariah Mandiri, Panin Syariah and Victoria Syariah; quadrant IV two banks in low level of productivity and efficiency namely Mega Syariah and Bukopin Syariah. While the quadrant II namely BCA Syariah, BRI syariah and Muamalat and quadrant III namely BJB Syariah, BNI Syariah and Maybank Syariah required further research to determine the factors that affect the productivity and efficiency relationships that occur. 

  14. Efficient Sum of Outer Products Dictionary Learning (SOUP-DIL) and Its Application to Inverse Problems.

    Science.gov (United States)

    Ravishankar, Saiprasad; Nadakuditi, Raj Rao; Fessler, Jeffrey A

    2017-12-01

    The sparsity of signals in a transform domain or dictionary has been exploited in applications such as compression, denoising and inverse problems. More recently, data-driven adaptation of synthesis dictionaries has shown promise compared to analytical dictionary models. However, dictionary learning problems are typically non-convex and NP-hard, and the usual alternating minimization approaches for these problems are often computationally expensive, with the computations dominated by the NP-hard synthesis sparse coding step. This paper exploits the ideas that drive algorithms such as K-SVD, and investigates in detail efficient methods for aggregate sparsity penalized dictionary learning by first approximating the data with a sum of sparse rank-one matrices (outer products) and then using a block coordinate descent approach to estimate the unknowns. The resulting block coordinate descent algorithms involve efficient closed-form solutions. Furthermore, we consider the problem of dictionary-blind image reconstruction, and propose novel and efficient algorithms for adaptive image reconstruction using block coordinate descent and sum of outer products methodologies. We provide a convergence study of the algorithms for dictionary learning and dictionary-blind image reconstruction. Our numerical experiments show the promising performance and speedups provided by the proposed methods over previous schemes in sparse data representation and compressed sensing-based image reconstruction.

  15. An efficient descriptor model for designing materials for solar cells

    Science.gov (United States)

    Alharbi, Fahhad H.; Rashkeev, Sergey N.; El-Mellouhi, Fedwa; Lüthi, Hans P.; Tabet, Nouar; Kais, Sabre

    2015-11-01

    An efficient descriptor model for fast screening of potential materials for solar cell applications is presented. It works for both excitonic and non-excitonic solar cells materials, and in addition to the energy gap it includes the absorption spectrum (α(E)) of the material. The charge transport properties of the explored materials are modelled using the characteristic diffusion length (Ld) determined for the respective family of compounds. The presented model surpasses the widely used Scharber model developed for bulk heterojunction solar cells. Using published experimental data, we show that the presented model is more accurate in predicting the achievable efficiencies. To model both excitonic and non-excitonic systems, two different sets of parameters are used to account for the different modes of operation. The analysis of the presented descriptor model clearly shows the benefit of including α(E) and Ld in view of improved screening results.

  16. 77 FR 38743 - Energy Efficiency Program for Consumer Products: Energy Conservation Standards for Battery...

    Science.gov (United States)

    2012-06-29

    ... Efficiency Program for Consumer Products: Energy Conservation Standards for Battery Chargers and External Power Supplies AGENCY: Office of Energy Efficiency and Renewable Energy, Department of Energy. ACTION... Energy Efficiency and Renewable Energy, Building Technologies Program, EE-2J, 1000 Independence Avenue SW...

  17. 78 FR 9631 - Energy Efficiency Program for Consumer Products: Energy Conservation Standards for Residential...

    Science.gov (United States)

    2013-02-11

    ... Efficiency Program for Consumer Products: Energy Conservation Standards for Residential Boilers AGENCY: Office of Energy Efficiency and Renewable Energy, Department of Energy. ACTION: Notice of public meeting.... Department of Energy, Office of Energy Efficiency and Renewable Energy, Building Technologies Program, EE-2J...

  18. Efficiency of nitrogen fertilizer in rice culture production

    International Nuclear Information System (INIS)

    Romero, M.R.; Perez, C.; Sosa, J.L.

    1990-01-01

    Using the isotopic tracer technique with 15 urea, the efficiency of three ways of nitrogen fertilizer splitting in rice was determined. Fractioning at three moments, initial tilloring, active tile ring and primordial change, allowed a better assimilation of nitrogen by the grain and the rest of the plant. The optimum moment for the application of the fertilizer was at primordial change, while the highest took place at seeding

  19. Neuro-fuzzy modelling of hydro unit efficiency

    International Nuclear Information System (INIS)

    Iliev, Atanas; Fushtikj, Vangel

    2003-01-01

    This paper presents neuro-fuzzy method for modeling of the hydro unit efficiency. The proposed method uses the characteristics of the fuzzy systems as universal function approximates, as well the abilities of the neural networks to adopt the parameters of the membership's functions and rules in the consequent part of the developed fuzzy system. Developed method is practically applied for modeling of the efficiency of unit which will be installed in the hydro power plant Kozjak. Comparison of the performance of the derived neuro-fuzzy method with several classical polynomials models is also performed. (Author)

  20. Evaluation of discrete modeling efficiency of asynchronous electric machines

    OpenAIRE

    Byczkowska-Lipińska, Liliana; Stakhiv, Petro; Hoholyuk, Oksana; Vasylchyshyn, Ivanna

    2011-01-01

    In the paper the problem of effective mathematical macromodels in the form of state variables intended for asynchronous motor transient analysis is considered. Their comparing with traditional mathematical models of asynchronous motors including models built into MATLAB/Simulink software was carried out and analysis of their efficiency was conducted.

  1. Evaluating energy efficiency policies with energy-economy models

    NARCIS (Netherlands)

    Mundaca, L.; Neij, L.; Worrell, E.; McNeil, M.

    2010-01-01

    The growing complexities of energy systems, environmental problems, and technology markets are driving and testing most energy-economy models to their limits. To further advance bottom-up models from a multidisciplinary energy efficiency policy evaluation perspective, we review and critically

  2. Efficient Modelling and Generation of Markov Automata (extended version)

    NARCIS (Netherlands)

    Timmer, Mark; Katoen, Joost P.; van de Pol, Jan Cornelis; Stoelinga, Mariëlle Ida Antoinette

    2012-01-01

    This paper introduces a framework for the efficient modelling and generation of Markov automata. It consists of (1) the data-rich process-algebraic language MAPA, allowing concise modelling of systems with nondeterminism, probability and Markovian timing; (2) a restricted form of the language, the

  3. Rigid-beam model of a high-efficiency magnicon

    International Nuclear Information System (INIS)

    Rees, D.E.; Tallerico, P.J.; Humphries, S.J. Jr.

    1993-01-01

    The magnicon is a new type of high-efficiency deflection-modulated amplifier developed at the Institute of Nuclear Physics in Novosibirsk, Russia. The prototype pulsed magnicon achieved an output power of 2.4 MW and an efficiency of 73% at 915 MHz. This paper presents the results of a rigid-beam model for a 700-MHz, 2.5-MW 82%-efficient magnicon. The rigid-beam model allows for characterization of the beam dynamics by tracking only a single electron. The magnicon design presented consists of a drive cavity; passive cavities; a pi-mode, coupled-deflection cavity; and an output cavity. It represents an optimized design. The model is fully self-consistent, and this paper presents the details of the model and calculated performance of a 2.5-MW magnicon

  4. Rice growing farmers efficiency measurement using a slack based interval DEA model with undesirable outputs

    Science.gov (United States)

    Khan, Sahubar Ali Mohd. Nadhar; Ramli, Razamin; Baten, M. D. Azizul

    2017-11-01

    In recent years eco-efficiency which considers the effect of production process on environment in determining the efficiency of firms have gained traction and a lot of attention. Rice farming is one of such production processes which typically produces two types of outputs which are economic desirable as well as environmentally undesirable. In efficiency analysis, these undesirable outputs cannot be ignored and need to be included in the model to obtain the actual estimation of firm's efficiency. There are numerous approaches that have been used in data envelopment analysis (DEA) literature to account for undesirable outputs of which directional distance function (DDF) approach is the most widely used as it allows for simultaneous increase in desirable outputs and reduction of undesirable outputs. Additionally, slack based DDF DEA approaches considers the output shortfalls and input excess in determining efficiency. In situations when data uncertainty is present, the deterministic DEA model is not suitable to be used as the effects of uncertain data will not be considered. In this case, it has been found that interval data approach is suitable to account for data uncertainty as it is much simpler to model and need less information regarding the underlying data distribution and membership function. The proposed model uses an enhanced DEA model which is based on DDF approach and incorporates slack based measure to determine efficiency in the presence of undesirable factors and data uncertainty. Interval data approach was used to estimate the values of inputs, undesirable outputs and desirable outputs. Two separate slack based interval DEA models were constructed for optimistic and pessimistic scenarios. The developed model was used to determine rice farmers efficiency from Kepala Batas, Kedah. The obtained results were later compared to the results obtained using a deterministic DDF DEA model. The study found that 15 out of 30 farmers are efficient in all cases. It

  5. Epstein-Barr Virus BKRF4 Gene Product Is Required for Efficient Progeny Production.

    Science.gov (United States)

    Masud, H M Abdullah Al; Watanabe, Takahiro; Yoshida, Masahiro; Sato, Yoshitaka; Goshima, Fumi; Kimura, Hiroshi; Murata, Takayuki

    2017-12-01

    Epstein-Barr virus (EBV), a member of human gammaherpesvirus, infects mainly B cells. EBV has two alternative life cycles, latent and lytic, and is reactivated occasionally from the latent stage to the lytic cycle. To combat EBV-associated disorders, understanding the molecular mechanisms of the EBV lytic replication cycle is also important. Here, we focused on an EBV lytic gene, BKRF4. Using our anti-BKRF4 antibody, we revealed that the BKRF4 gene product is expressed during the lytic cycle with late kinetics. To characterize the role of BKRF4, we constructed BKRF4-knockout mutants using the bacterial artificial chromosome (BAC) and CRISPR/Cas9 systems. Although disruption of the BKRF4 gene had almost no effect on viral protein expression and DNA synthesis, it significantly decreased progeny virion levels in HEK293 and Akata cells. Furthermore, we show that BKRF4 is involved not only in production of progeny virions but also in increasing the infectivity of the virus particles. Immunoprecipitation assays revealed that BKRF4 interacted with a virion protein, BGLF2. We showed that the C-terminal region of BKRF4 was critical for this interaction and for efficient progeny production. Immunofluorescence analysis revealed that BKRF4 partially colocalized with BGLF2 in the nucleus and perinuclear region. Finally, we showed that BKRF4 is a phosphorylated, possible tegument protein and that the EBV protein kinase BGLF4 may be important for this phosphorylation. Taken together, our data suggest that BKRF4 is involved in the production of infectious virions. IMPORTANCE Although the latent genes of EBV have been studied extensively, the lytic genes are less well characterized. This study focused on one such lytic gene, BKRF4, which is conserved only among gammaherpesviruses (ORF45 of Kaposi's sarcoma-associated herpesvirus or murine herpesvirus 68). After preparing the BKRF4 knockout virus using B95-8 EBV-BAC, we demonstrated that the BKRF4 gene was involved in infectious

  6. Evaluation of the energy efficiency of enzyme fermentation by mechanistic modeling.

    Science.gov (United States)

    Albaek, Mads O; Gernaey, Krist V; Hansen, Morten S; Stocks, Stuart M

    2012-04-01

    Modeling biotechnological processes is key to obtaining increased productivity and efficiency. Particularly crucial to successful modeling of such systems is the coupling of the physical transport phenomena and the biological activity in one model. We have applied a model for the expression of cellulosic enzymes by the filamentous fungus Trichoderma reesei and found excellent agreement with experimental data. The most influential factor was demonstrated to be viscosity and its influence on mass transfer. Not surprisingly, the biological model is also shown to have high influence on the model prediction. At different rates of agitation and aeration as well as headspace pressure, we can predict the energy efficiency of oxygen transfer, a key process parameter for economical production of industrial enzymes. An inverse relationship between the productivity and energy efficiency of the process was found. This modeling approach can be used by manufacturers to evaluate the enzyme fermentation process for a range of different process conditions with regard to energy efficiency. Copyright © 2011 Wiley Periodicals, Inc.

  7. On production costs in vertical differentiation models

    OpenAIRE

    Dorothée Brécard

    2009-01-01

    In this paper, we analyse the effects of the introduction of a unit production cost beside a fixed cost of quality improvement in a duopoly model of vertical product differentiation. Thanks to an original methodology, we show that a low unit cost tends to reduce product differentiation and thus prices, whereas a high unit cost leads to widen product differentiation and to increase prices

  8. An Optimization Model for Product Placement on Product Listing Pages

    Directory of Open Access Journals (Sweden)

    Yan-Kwang Chen

    2014-01-01

    Full Text Available The design of product listing pages is a key component of Website design because it has significant influence on the sales volume on a Website. This study focuses on product placement in designing product listing pages. Product placement concerns how venders of online stores place their products over the product listing pages for maximization of profit. This problem is very similar to the offline shelf management problem. Since product information sources on a Web page are typically communicated through the text and image, visual stimuli such as color, shape, size, and spatial arrangement often have an effect on the visual attention of online shoppers and, in turn, influence their eventual purchase decisions. In view of the above, this study synthesizes the visual attention literature and theory of shelf-space allocation to develop a mathematical programming model with genetic algorithms for finding optimal solutions to the focused issue. The validity of the model is illustrated with example problems.

  9. Fiscal 1999 report on result on the model project for systematization of high-efficiency combustion of by-product gas in ironworks. Part 2/2; 1999 nendo seitetsusho fukusei gas kokoritsu nensho system ka model jigyo. 2/2

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-09-01

    For the purpose of reducing energy consumption of the steel industry, a large energy consuming industry in China, a model project was carried out for systematization of high-efficiency combustion of by-product gasses in ironworks, with the fiscal 1999 results compiled in the form of detailed design/documents, and the like. This project is intended for demonstration and dissemination of technologies for improving energy consumption efficiency, by controlling mixed gas calorie and oxygen content, in the reheating furnaces that consume as fuels various combustible gasses produced in iron and steel making processes. Arranged in the detailed design documentation were numerous drawings including a list of mixed gas equipment, design drawing of mixed gas orifice, specification of mixed gas control valves, list of reheating furnace equipment and devices for No.1 small plant, specification of control valves of reheating furnace for No.1 plant, list of reheating equipment and devices for slab plant, specification of calorimeter, specification of oxygen concentration meter, No.1 mixed gas wiring system diagram, and No.3 mixed gas piping/assembling manual. Also prepared were a manual for pre-shipment inspection and report on inspection findings, as well as notes on transportation, program for receiving Chinese engineers, schedule for dispatching engineers, etc. (NEDO)

  10. Proactive Modeling of Market, Product and Production Architectures

    DEFF Research Database (Denmark)

    Mortensen, Niels Henrik; Hansen, Christian Lindschou; Hvam, Lars

    2011-01-01

    This paper presents an operational model that allows description of market, products and production architectures. The main feature of this model is the ability to describe both structural and functional aspect of architectures. The structural aspect is an answer to the question: What constitutes...... the architecture, e.g. standard designs, design units and interfaces? The functional aspect is an answer to the question: What is the behaviour or the architecture, what is it able to do, i.e. which products at which performance levels can be derived from the architecture? Among the most important benefits...... of this model is the explicit ability to describe what the architecture is prepared for, and what it is not prepared for - concerning development of future derivative products. The model has been applied in a large scale global product development project. Among the most important benefits is contribution to...

  11. The Productivity and Technical Efficiency of Textile Industry Clusters in India

    Science.gov (United States)

    Bhaskaran, E.

    2013-09-01

    The Indian textile industry is one the largest and oldest sectors in the country and among the most important in the economy in terms of output, investment and employment (E). The sector employs nearly 35 million people and after agriculture, is the second-highest employer in the country. Its importance is underlined by the fact that it accounts for around 4 % of Gross Domestic Product, 14 % of industrial production, 9 % of excise collections, 18 % of E in the industrial sector, and 16 % of the country's total exports (Ex) earnings. For inclusive growth and sustainable development most of the Textile Manufacturers has adopted the Cluster Development Approach. The objective is to study the physical and financial performance, correlation, regression and Data Envelopment Analysis by measuring technical efficiency (Ø), peer weights (λi), input slacks (S-), output slacks (S+) and return to scale of four textile clusters (TCs) namely IchalKaranji Textile Cluster, Maharashtra; Ludhiana Textile Cluster, Punjab; Tirupur Textile Cluster, Tamilnadu and Panipat Textile Cluster, Haryana in India. The methodology adopted is using Data Envelopment Analysis of Output Oriented Banker Charnes Cooper Model by taking number of units (U) and number of E as inputs and sales (S) and Ex in crores as an outputs. The non-zero λi's represents the weights for efficient clusters. The S > 0 obtained for one TC reveals the excess U (S-) and E (S-) and shortage in sales (S+) and Ex (S+). To conclude, for inclusive growth and sustainable development, the inefficient TC should increase their S/turnover and Ex, as decrease in number of enterprises and E is practically not possible. Moreover for sustainable development, the TC should strengthen infrastructure interrelationships, technology interrelationships, procurement interrelationships, production interrelationships and marketing interrelationships to decrease cost, increase productivity and efficiency to compete in the world market.

  12. A method to identify energy efficiency measures for factory systems based on qualitative modeling

    CERN Document Server

    Krones, Manuela

    2017-01-01

    Manuela Krones develops a method that supports factory planners in generating energy-efficient planning solutions. The method provides qualitative description concepts for factory planning tasks and energy efficiency knowledge as well as an algorithm-based linkage between these measures and the respective planning tasks. Its application is guided by a procedure model which allows a general applicability in the manufacturing sector. The results contain energy efficiency measures that are suitable for a specific planning task and reveal the roles of various actors for the measures’ implementation. Contents Driving Concerns for and Barriers against Energy Efficiency Approaches to Increase Energy Efficiency in Factories Socio-Technical Description of Factory Planning Tasks Description of Energy Efficiency Measures Case Studies on Welding Processes and Logistics Systems Target Groups Lecturers and Students of Industrial Engineering, Production Engineering, Environmental Engineering, Mechanical Engineering Practi...

  13. Applying optimization techniques to improve of energy efficiency and GHG (greenhouse gas) emissions of wheat production

    International Nuclear Information System (INIS)

    Nabavi-Pelesaraei, Ashkan; Hosseinzadeh-Bandbafha, Homa; Qasemi-Kordkheili, Peyman; Kouchaki-Penchah, Hamed; Riahi-Dorcheh, Farshid

    2016-01-01

    In this study a non-parametric method of DEA (Data Envelopment Analysis) and MOGA (Multi-Objective Genetic Algorithm) were used to estimate the energy efficiency and greenhouse gas emissions reduction of wheat farmers in Ahvaz county of Iran. Data were collected using a face-to-face questionnaire method from 39 farmers. The results showed that based on constant returns to scale model, 41.02% of wheat farms were efficient, though based on variable returns to scale model it was 53.23%. The average of technical, pure technical and scale efficiency of wheat farms were 0.94, 0.95 and 0.98, respectively. By following the recommendations of this study, 3640.90 MJ ha"−"1 could be saved (9.13% of total input energy). Moreover, 42 optimal units were found by MOGA. The total energy required and GHG (greenhouse gas) emissions of the best generation of MOGA were about 23105 MJ ha"−"1 and 340 kgCO_2_e_q_. ha"−"1, respectively. The results revealed that the total energy required of MOGA was less than DEA, significantly. Also, the GHG emissions of present, DEA and MOGA farms were about 903, 837 and 340 kgCO_2_e_q_. ha"−"1, respectively. - Highlights: • We analyze the energy efficiency and GHG emissions of wheat production in Iran. • The technical and pure technical efficiencies were 0.94 and 0.95 respectively. • DEA can be saved total energy and GHG emissions 9.13% and 7.28% respectively. • MOGA can be reduced total energy and GHG emissions more than DEA significantly.

  14. A Network DEA Model with Super Efficiency and Undesirable Outputs: An Application to Bank Efficiency in China

    Directory of Open Access Journals (Sweden)

    Jianhuan Huang

    2014-01-01

    Full Text Available There are two typical subprocesses in bank production—deposit generation and loan generation. Aiming to open the black box of input-output production of banks and provide comprehensive and accurate assessment on the efficiency of each stage, this paper proposes a two-stage network model with bad outputs and supper efficiency (US-NSBM. Empirical comparisons show that the US-NSBM may be promising and practical for taking the nonperforming loans into account and being able to rank all samples. Applying it to measure the efficiency of Chinese commercial banks from 2008 to 2012, this paper explores the characteristics of overall and divisional efficiency, as well as the determinants of them. Some interesting results are discovered. The polarization of efficiency occurs in the bank level and deposit generation, yet does not in the loan generation. Five hypotheses work as expected in the bank level, but not all of them are supported in the stage level. Our results extend and complement some earlier empirical publications in the bank level.

  15. Modeling dependencies in product families with COVAMOF

    NARCIS (Netherlands)

    Sinnema, Marco; Deelstra, Sybren; Nijhuis, Jos; Bosch, Jan; Riebisch, M; Tabeling, P; Zorn, W

    2006-01-01

    Many variability modeling approaches consider only formalized dependencies, i.e. in- or exclude relations between variants. However, in real industrial product families, dependencies are often much more complicated. In this paper, we discuss the product derivation problems associated with

  16. Efficient removal of Cd2+ from aqueous solutions using by-product of biodiesel production

    International Nuclear Information System (INIS)

    Ribeiro, Rita F.L.; Soares, Vitor C.; Costa, Letícia M.; Nascentes, Clésia C.

    2012-01-01

    Highlights: ► Sorbents were prepared from radish cake, a waste from biodiesel production. ► The chemical treatments used were simple, low-cost and enhanced the Cd 2+ sorption. ► The cadmium sorption process was evaluated by Freundlich and Langmuir models. ► Chemically treated radish cake is an excellent alternative for removal of Cd 2+ . ► Desorption studies demonstrated that the sorbent–metal interaction is reversible. - Abstract: In this study, chemically modified radish cake, a by-product of biodiesel production, was used to remove Cd 2+ from aqueous solutions. The chemical modification was carried out by treating the radish cake with citric acid (CRC), NaOH (NRC) or the combination of citric acid and NaOH (CNRC). The sorbents were characterized by elemental analysis, surface area analysis, infrared spectroscopy (FTIR), potentiometric titration (PT), scanning electron microscopy–energy dispersive spectroscopy (SEM–EDS), and thermogravimetric analysis (TGA). The effect of the chemical treatment and contact time on cadmium sorption was evaluated. The equilibrium data were analyzed using Freundlich and Langmuir models. The maximum sorption capacity obtained by the Langmuir isotherm was 58.5 mg/g and 64.10 mg/g for the CRC, and CNRC sorbents, respectively. Complete desorption of Cd 2+ was achieved using 0.1 mol/L HNO 3 . The results obtained demonstrate that chemically modified radish cake has potential as a sorbent for Cd 2+ removal from aqueous solutions.

  17. Efficient modeling of vector hysteresis using fuzzy inference systems

    International Nuclear Information System (INIS)

    Adly, A.A.; Abd-El-Hafiz, S.K.

    2008-01-01

    Vector hysteresis models have always been regarded as important tools to determine which multi-dimensional magnetic field-media interactions may be predicted. In the past, considerable efforts have been focused on mathematical modeling methodologies of vector hysteresis. This paper presents an efficient approach based upon fuzzy inference systems for modeling vector hysteresis. Computational efficiency of the proposed approach stems from the fact that the basic non-local memory Preisach-type hysteresis model is approximated by a local memory model. The proposed computational low-cost methodology can be easily integrated in field calculation packages involving massive multi-dimensional discretizations. Details of the modeling methodology and its experimental testing are presented

  18. A two-stage value chain model for vegetable marketing chain efficiency evaluation: A transaction cost approach

    OpenAIRE

    Lu Hualiang

    2006-01-01

    We applied a two-stage value chain model to investigate the effects of input application and occasional transaction costs on vegetable marketing chain efficiencies with a farm household-level data set. In the first stage, the production efficiencies with the combination of resource endowments, capital and managerial inputs, and production techniques were evaluated; then at the second stage, the marketing technical efficiencies were determined under the marketing value of the vegetables for th...

  19. Feed intake and production efficiency of beef cows

    Science.gov (United States)

    The objective of this study was to determine the relationships between DMI and growth as heifers and cows and calves weaned, weight of calf weaned, and milk production. Cows born in 1999-2001and sired by industry AI bulls (Angus, Hereford, Simmental, Limousin, Charolais, Gelbvieh, and Red Angus) an...

  20. Determinants of Charcoal Production Efficiency in Ibarapa North ...

    African Journals Online (AJOL)

    The data obtained were analyzed using descriptive statistics (percentage and frequency and stochastic frontier production function. The study revealed that mean age of producers was 36 years; 96.9% were males and 3.1 were females. Majority of the producers (76.9%) had no formal training on how to produce charcoal, ...

  1. Improving radiation use efficiency in greenhouse production systems

    NARCIS (Netherlands)

    Li, Tao

    2015-01-01

    SUMMARY

    A large increase in agricultural production is needed to feed the increasing world population with their increasing demand per capita. However, growing competition for arable land, water, energy, and the degradation of the environment impose challenges to improve

  2. Resource-Use Efficiency in Rice Production Under Small Scale ...

    African Journals Online (AJOL)

    This was attested by the high ratios (greater than unity) of MVP/MFC of all the variables. For optimum resource allocation to fertilizer, labour and land about 85.7%, 83.3% and 69% increase in MVP is required respectively. The estimated elasticity of production summed up to 0.815 meaning decreasing return to scale.

  3. Comparison of productive and reproductive efficiency of Afrino ...

    African Journals Online (AJOL)

    ... are the primary factors determining profitability of a specific sheep enterprise. These parameters should thus be considered when changing from one breed or commodity to another. Keywords: Body weight; wool production; slaughter traits; income. South African Journal of Animal Sciences Vol. 35 (2) 2005: pp.98-108 ...

  4. Improved production efficiency in cattle to reduce their carbon ...

    African Journals Online (AJOL)

    The FAO publication, Livestock's Long Shadow, indicated that livestock is responsible for 18% of the world's greenhouse gas production thereby creating the perception that livestock is a major cause of global warming. Methane (CH4) makes up 16% of total world gas emissions and is the second most important ...

  5. Economic Efficiency of Maize Production in Yola North Local ...

    African Journals Online (AJOL)

    user

    ABSTRACT. The ability of herbaceous legumes to supply nitrogen to subsequent cereal crops could be harnessed to alleviate the difficulties in cereal production due to poor soil fertility and expensive inorganic fertilizers. Field experiments were carried out in Zaria, Nigeria to determine the soil improvement potential of ...

  6. Allocative efficiency, employment and rice production risk: An ...

    African Journals Online (AJOL)

    Smallholder farmers have developed coping mechanisms in order to minimize the negative impact of rice production risks. A programme to accelerate the provision of education and credit is needed. The education programme should include both formal and non-formal elements. This is important for the improvement of ...

  7. Efficient production of Arthromyces ramosus peroxidase by Aspergillus awamori

    NARCIS (Netherlands)

    Lokman, B.C.; Joosten, V.; Hovenkamp, J.; Gouka, R.J.; Verrips, C.T.; Hondel, C.A.M.J.J. van den

    2003-01-01

    The heterologous production of Arthromyces ramosus peroxidase (ARP) was analysed in the filamentous fungus Aspergillus awamori under control of the inducible endoxylanase promoter. Secretion of active ARP was achieved up to 800 mg l-1 in shake flask cultures. Western blot analysis showed that an

  8. FORMATION AND DEVELOPMENT OF INSTITUTIONS OF EFFICIENCY PRODUCTION INFRASTRUCTURE

    Directory of Open Access Journals (Sweden)

    Anzor H. Jankaziev

    2015-01-01

    Full Text Available The article presents the methodological andmethodical bases of research and development institutes forming effi ciency production infrastructure. Focuses on the organizationalside of the issue as the comparative characteristics. It is proposed allocation of integraland differential approach to assessing the investment attractiveness of the industrial infrastructure of the enterprise. Consideredsectoral, regional, national and internationallevels of development of industrial infrastructure.

  9. Root system-based limits to agricultural productivity and efficiency

    DEFF Research Database (Denmark)

    Thorup-Kristensen, Kristian; Kirkegaard, John

    2016-01-01

    of water and nitrogen from deeper soil layers has been proposed to improve productivity and environmental outcomes in both systems. The analysis showed that water and nitrogen availability, especially in deeper layers (>1 m), was significantly affected by the preceding crops and management, and likely...

  10. Energy efficiency improvement target for SIC 34 - fabricated metal products

    Energy Technology Data Exchange (ETDEWEB)

    Byrer, T. G.; Billhardt, C. F.; Farkas, M. S.

    1977-03-15

    A March 15, 1977 revision of a February 15, 1977 document on the energy improvement target for the Fabricated Metal Products industry (SIC 34) is presented. A net energy savings in 1980 of 24% as compared with 1972 energy consumption in SIC 34 is considered a realistic goal. (ERA citation 04:045008)

  11. Improving efficiency of polystyrene concrete production with composite binders

    Science.gov (United States)

    Lesovik, R. V.; Ageeva, M. S.; Lesovik, G. A.; Sopin, D. M.; Kazlitina, O. V.; Mitrokhina, A. A.

    2018-03-01

    According to leading marketing researchers, the construction market in Russia and CIS will continue growing at a rapid rate; this applies not only to a large-scale major construction, but to a construction of single-family houses and small-scale industrial facilities as well. Due to this, there are increased requirements for heat insulation of the building enclosures and a significant demand for efficient walling materials with high thermal performance. All these developments led to higher requirements imposed on the equipment that produces such materials.

  12. Efficiency of RNA extraction from selected bacteria in the context of biogas production and metatranscriptomics.

    Science.gov (United States)

    Stark, Lucy; Giersch, Tina; Wünschiers, Röbbe

    2014-10-01

    Understanding the microbial population in anaerobic digestion is an essential task to increase efficient substrate use and process stability. The metabolic state, represented e.g. by the transcriptome, of a fermenting system can help to find markers for monitoring industrial biogas production to prevent failures or to model the whole process. Advances in next-generation sequencing make transcriptomes accessible for large-scale analyses. In order to analyze the metatranscriptome of a mixed-species sample, isolation of high-quality RNA is the first step. However, different extraction methods may yield different efficiencies in different species. Especially in mixed-species environmental samples, unbiased isolation of transcripts is important for meaningful conclusions. We applied five different RNA-extraction protocols to nine taxonomic diverse bacterial species. Chosen methods are based on various lysis and extraction principles. We found that the extraction efficiency of different methods depends strongly on the target organism. RNA isolation of gram-positive bacteria was characterized by low yield whilst from gram-negative species higher concentrations can be obtained. Transferring our results to mixed-species investigations, such as metatranscriptomics with biofilms or biogas plants, leads to the conclusion that particular microorganisms might be over- or underrepresented depending on the method applied. Special care must be taken when using such metatranscriptomics data for, e.g. process modeling. Copyright © 2013 Elsevier Ltd. All rights reserved.

  13. Modelling Product Families for Product Configuration Systems with Product Variant Master

    DEFF Research Database (Denmark)

    Mortensen, Niels Henrik; Hvam, Lars; Haug, Anders

    2010-01-01

    This article presents an evaluation of applying a suggested method for modelling product families for product configuration based on theory for modelling mechanical products,systems theory and object-oriented modelling. The modelling technique includes a so-called product variant master and CRC-cards...... the three views. Modelling of characteristics of the product variants in a product family Modelling of constraints between parts in the product family Visualisation of the entire product family on a poster e.g. 1x2 meters The product variant master and CRC-cards are means to bridge the gap between domain...... experts and IT-developers, thus making it possible for the domain experts (e.g. engineers from product development) to express their knowledge in a form that is understandable both for the domain experts and the IT-developers. The product variant master and CRC-cards have currently been tested and further...

  14. Efficiency of the sulfur-iodine thermochemical water splitting process for hydrogen production based on ADS

    International Nuclear Information System (INIS)

    Gonzalez, D.; Garcia, L.; Garcia, C.; Garcia, L.; Brayner, C.

    2013-01-01

    The current hydrogel production is based on fossil fuels; they have a huge contribution to the atmosphere's pollution. thermochemical water splitting cycles don't present this issue because the required process heat is obtained from nuclear energy and therefore, the environmental impact is smaller than using conventional fuels. One of the promising approaches to produce large quantities of hydrogen in an efficient way using nuclear energy is the sulfur-iodine (S-I) thermochemical water splitting cycle. The nuclear source proposed in this paper is a pebble bed gas cooled transmutation facility. Pebble bed very high temperature advanced systems have great perspectives to assume the future nuclear energy. Software based on Chemical Process Simulation (CPS) can be used to simulate the thermochemical water splitting sulfur-iodine cycle for hydrogen production. In this paper, a model for analyzing the sulfur-iodine process sensibility is developed. Efficiency is also calculated and the influence of different parameters on this value. The behavior of the proposed model before different values of initial reactant's flow is analyzed. (Author)

  15. The impact of ownership structure on bank productivity and efficiency: Evidence from semi-parametric Malmquist Productivity Index

    Directory of Open Access Journals (Sweden)

    Fadzlan Sufian

    2014-12-01

    Full Text Available The present study employs the state of the art bias-corrected Malmquist Productivity Index method to examine the sources of efficiency and productivity of the foreign and domestic banks operating in the Malaysian banking sector. The preferred methodology enables us to isolate efforts to catch up to the frontier (efficiency change from shifts in the frontier (technological change [TECHCH]. The results indicate that the Malaysian banking sector has exhibited productivity progress mainly attributed to technological progress. The empirical findings suggest that both the domestic and foreign banks have exhibited productivity progress albeit at different quantum attributed mainly to progress in TECHCH.

  16. CRC-cards for Product Modelling

    DEFF Research Database (Denmark)

    Hvam, Lars; Riis, Jesper; Hansen, Benjamin Loer

    2003-01-01

    , transportation, service and decommissioning. A main challenge when building product models is to collect and document the product related data, information and knowledge in a structured way. CRC cards are index cards (or computerized versions of these) which are used to record proposed classes, the behavior......This paper describes the CRC (class, responsibility, collaboration) modelling process for building product models. A product model is normally represented in an IT system which contains data, information and knowledge on industrial products and their life cycle properties e.g. manufacturing...... of the classes, their responsibilities, and their relationship to other classes (collaboration). CRC modelling gives an effective, low-tech method for domain-experts, programmers and users to work closely together to identify, structure, understand and document a product model. CRC cards were originally...

  17. Risk Adjusted Production Efficiency of Maize Farmers in Ethiopia: Implication for Improved Maize Varieties Adoption

    Directory of Open Access Journals (Sweden)

    Sisay Diriba Lemessa

    2017-09-01

    Full Text Available This study analyzes the technical efficiency and production risk of 862 maize farmers in major maize producing regions of Ethiopia. It employs the stochastic frontier approach (SFA to estimate the level of technical efficiencies of stallholder farmers. The stochastic frontier approach (SFA uses flexible risk properties to account for production risk. Thus, maize production variability is assessed from two perspectives, the production risk and the technical efficiency. The study also attempts to determine the socio-economic and farm characteristics that influence technical efficiency of maize production in the study area. The findings of the study showed the existence of both production risk and technical inefficiency in maize production process. Input variables (amounts per hectare such as fertilizer and labor positively influence maize output. The findings also show that farms in the study area exhibit decreasing returns to scale. Fertilizer and ox plough days reduce output risk while labor and improved seed increase output risk. The mean technical efficiency for maize farms is 48 percent. This study concludes that production risk and technical inefficiency prevents the maize farmers from realizing their frontier output. The best factors that improve the efficiency of the maize farmers in the study area include: frequency of extension contact, access to credit and use of intercropping. It was also realized that altitude and terracing in maize farms had influence on farmer efficiency.

  18. Modeling and energy efficiency optimization of belt conveyors

    International Nuclear Information System (INIS)

    Zhang, Shirong; Xia, Xiaohua

    2011-01-01

    Highlights: → We take optimization approach to improve operation efficiency of belt conveyors. → An analytical energy model, originating from ISO 5048, is proposed. → Then an off-line and an on-line parameter estimation schemes are investigated. → In a case study, six optimization problems are formulated with solutions in simulation. - Abstract: The improvement of the energy efficiency of belt conveyor systems can be achieved at equipment and operation levels. Specifically, variable speed control, an equipment level intervention, is recommended to improve operation efficiency of belt conveyors. However, the current implementations mostly focus on lower level control loops without operational considerations at the system level. This paper intends to take a model based optimization approach to improve the efficiency of belt conveyors at the operational level. An analytical energy model, originating from ISO 5048, is firstly proposed, which lumps all the parameters into four coefficients. Subsequently, both an off-line and an on-line parameter estimation schemes are applied to identify the new energy model, respectively. Simulation results are presented for the estimates of the four coefficients. Finally, optimization is done to achieve the best operation efficiency of belt conveyors under various constraints. Six optimization problems of a typical belt conveyor system are formulated, respectively, with solutions in simulation for a case study.

  19. Description, Modelling and Design of Production Systems

    DEFF Research Database (Denmark)

    Jacobsen, Peter; Rudolph, Carsten

    1997-01-01

    Design of production systems are rarely an activity in which decision makers in most production companies have much experience. In future, this activity is to be more recurrent due to more and more frequent changes in the production task. Consequently, the decision makers are in need of better...... management tools and methods for description and modelling of production systems supporting the decisions. In this article a structural framework to describe and model production systems will be introduced, and it is shown how the production system of a minor Danish manufacturer of electromechanical...

  20. STRUCTURE OF THE MARKET OF INNOVATIVE PRODUCTS: APPROACH TO ASSESSING THE IMPACT ON EFFICIENCY

    Directory of Open Access Journals (Sweden)

    Anna Elagina

    2015-06-01

    Full Text Available The formation of innovation policy innovative economy is impossible without an understanding of the conceptual basis of the efficiency of production of innovative products. In particular, determination of the influence of market structure on the possibility of expanded reproduction of innovative products. The article is devoted to consideration of existing in this field of research and definition of the limits of quantitative assessment of the influence of defects of market structures on efficiency.

  1. Improving efficiency assessments using additive data envelopment analysis models: an application to contrasting dairy farming systems

    Directory of Open Access Journals (Sweden)

    Andreas Diomedes Soteriades

    2015-10-01

    Full Text Available Applying holistic indicators to assess dairy farm efficiency is essential for sustainable milk production. Data Envelopment Analysis (DEA has been instrumental for the calculation of such indicators. However, ‘additive’ DEA models have been rarely used in dairy research. This study presented an additive model known as slacks-based measure (SBM of efficiency and its advantages over DEA models used in most past dairy studies. First, SBM incorporates undesirable outputs as actual outputs of the production process. Second, it identifies the main production factors causing inefficiency. Third, these factors can be ‘priced’ to estimate the cost of inefficiency. The value of SBM for efficiency analyses was demonstrated with a comparison of four contrasting dairy management systems in terms of technical and environmental efficiency. These systems were part of a multiple-year breeding and feeding systems experiment (two genetic lines: select vs. control; and two feeding strategies: high forage vs. low forage, where the latter involved a higher proportion of concentrated feeds where detailed data were collected to strict protocols. The select genetic herd was more technically and environmentally efficient than the control herd, regardless of feeding strategy. However, the efficiency performance of the select herd was more volatile from year to year than that of the control herd. Overall, technical and environmental efficiency were strongly and positively correlated, suggesting that when technically efficient, the four systems were also efficient in terms of undesirable output reduction. Detailed data such as those used in this study are increasingly becoming available for commercial herds through precision farming. Therefore, the methods presented in this study are growing in importance.

  2. An efficient and effective teaching model for ambulatory education.

    Science.gov (United States)

    Regan-Smith, Martha; Young, William W; Keller, Adam M

    2002-07-01

    Teaching and learning in the ambulatory setting have been described as inefficient, variable, and unpredictable. A model of ambulatory teaching that was piloted in three settings (1973-1981 in a university-affiliated outpatient clinic in Portland, Oregon, 1996-2000 in a community outpatient clinic, and 2000-2001 in an outpatient clinic serving Dartmouth Medical School's teaching hospital) that combines a system of education and a system of patient care is presented. Fully integrating learners into the office practice using creative scheduling, pre-rotation learning, and learner competence certification enabled the learners to provide care in roles traditionally fulfilled by physicians and nurses. Practice redesign made learners active members of the patient care team by involving them in such tasks as patient intake, histories and physicals, patient education, and monitoring of patient progress between visits. So that learners can be active members of the patient care team on the first day of clinic, pre-training is provided by the clerkship or residency so that they are able to competently provide care in the time available. To assure effective education, teaching and learning times are explicitly scheduled by parallel booking of patients for the learner and the preceptor at the same time. In the pilot settings this teaching model maintained or improved preceptor productivity and on-time efficiency compared with these outcomes of traditional scheduling. The time spent alone with patients, in direct observation by preceptors, and for scheduled case discussion was appreciated by learners. Increased satisfaction was enjoyed by learners, teachers, clinic staff, and patients. Barriers to implementation include too few examining rooms, inability to manipulate patient appointment schedules, and learners' not being present in a teaching clinic all the time.

  3. Materials and methods for efficient lactic acid production

    Science.gov (United States)

    Zhou, Shengde; Ingram, Lonnie O& #x27; Neal; Shanmugam, Keelnatham T; Yomano, Lorraine; Grabar, Tammy B; Moore, Jonathan C

    2013-04-23

    The present invention provides derivatives of Escherichia coli constructed for the production of lactic acid. The transformed E. coli of the invention are prepared by deleting the genes that encode competing pathways followed by a growth-based selection for mutants with improved performance. These transformed E. coli are useful for providing an increased supply of lactic acid for use in food and industrial applications.

  4. Optimization of photovoltaic energy production through an efficient switching matrix

    Directory of Open Access Journals (Sweden)

    Pietro Romano

    2013-09-01

    Full Text Available This work presents a preliminary study on the implementation of a new system for power output maximization of photovoltaic generators under non-homogeneous conditions. The study evaluates the performance of an efficient switching matrix and the relevant automatic reconfiguration control algorithms. The switching matrix is installed between the PV generator and the inverter, allowing a large number of possible module configurations. PV generator, switching matrix and the intelligent controller have been simulated in Simulink. The proposed reconfiguration system improved the energy extracted by the PV generator under non-uniform solar irradiation conditions. Short calculation times of the proposed control algorithms allow its use in real time applications even where a higher number of PV modules is required.

  5. Eco-efficiency Analysis of Furniture Product Using Life Cycle Assessment

    Science.gov (United States)

    Rinawati, Dyah Ika; Sriyanto; Sari, Diana Puspita; Prayodha, Andana Cantya

    2018-02-01

    Furniture is one of Indonesia's main commodities strategically role in economic growth and employment in Indonesia. In their production process there many wastes resulted, such as such as sawdust, cuttings - pieces of wood, components that do not conform to specifications and the edges of wood from a log. Contrast with requirement of timber for furniture industries, availability of raw material sources decrease because of limited forest areas. Beside that, using electricity and chemical material in furniture production process have impact to environment. This study aim to assess the eco-cost and eco-efficiency ratio of the product so strategic recommendations to improve the eco-efficiency of products can be designed. The results of data processing showed the environmental costs of the furniture production process amount Rp 30.887.84. Eco-efficiency index of furniture products studied was 4,79 with the eco-efficiency ratio of 79,12%. This result means that the measured furniture products already profitable and sustainable, as well as its production process is already fairly efficient. However, improved performance of the production process can still be done to improve the eco-efficiency by minimizing the use of raw materials.

  6. Eco-efficiency Analysis of Furniture Product Using Life Cycle Assessment

    Directory of Open Access Journals (Sweden)

    Ika Rinawati Dyah

    2018-01-01

    Full Text Available Furniture is one of Indonesia’s main commodities strategically role in economic growth and employment in Indonesia. In their production process there many wastes resulted, such as such as sawdust, cuttings - pieces of wood, components that do not conform to specifications and the edges of wood from a log. Contrast with requirement of timber for furniture industries, availability of raw material sources decrease because of limited forest areas. Beside that, using electricity and chemical material in furniture production process have impact to environment. This study aim to assess the eco-cost and eco-efficiency ratio of the product so strategic recommendations to improve the eco-efficiency of products can be designed. The results of data processing showed the environmental costs of the furniture production process amount Rp 30.887.84. Eco-efficiency index of furniture products studied was 4,79 with the eco-efficiency ratio of 79,12%. This result means that the measured furniture products already profitable and sustainable, as well as its production process is already fairly efficient. However, improved performance of the production process can still be done to improve the eco-efficiency by minimizing the use of raw materials.

  7. Measuring efficiency and productivity change in power electric generation management companies by using data envelopment analysis: A case study

    International Nuclear Information System (INIS)

    Fallahi, Alireza; Ebrahimi, Reza; Ghaderi, S.F.

    2011-01-01

    This paper provides an empirical analysis of the determinants of energy efficiency in 32 power electric generation management companies over the period 2005–2009. The study uses non-parametric Data Envelopment Analysis (DEA) to estimate the relative technical efficiency and productivity change of these companies. In order to verify the stability of our DEA model and the importance of each input variable, a stability test is also conducted. The results of the study indicate that average technical efficiency of companies decreased during the study period. Nearly half of the companies (14) are below this average level of 88.7% for five years. Moreover, it is shown that the low increase of productivity changes is more related to low efficiency rather than technology changes. -- Highlights: ► DEA was applied on the 32 power electric generation management companies. ► A stability test is applied to verify the stability of DEA model. ► Average technical efficiency of companies decreased during the study period. ► The low increase of productivity changes is more related to low efficiency changes.

  8. NEW ECO-EFFICIENT PRODUCTS USED IN LEATHER INDUSTRY

    Directory of Open Access Journals (Sweden)

    ROSU Dan

    2016-05-01

    Full Text Available In today's move to "sustainable production" the leather industry, as well as many other industries is recognized as a polluting one. Traditional chemical operations are polluting because of the levels of inorganic chemical waste. Process chemicals which are not consumed within the reactions necessary to convert collagen to leather are currently discharged to waste. These are usually applied during bulk production, such as inorganic agents from beam house and tanning processes, e.g. lime, sulphide, ammonium salts, sulphuric acid and sodium chloride, mineral tanning agents – mainly Cr(III and the less common Al(III, Zr(III, Ti(III, Fe(III salts -, whereas depending on the tanning process and the leather article produced organic chemical waste discharged comprises aldehydic and polyphenolic tanning products, bating enzymes, organic carboxylic acids and excess electrolyte stable synthetic fat liquors. It is rare for chemicals and water to be recovered for re-use from several of these process steps. Moreover, tanners worldwide are required to operate within strict legislative boundaries. Serious drawbacks continuously arise concerning the chrome–tanning process in leather industry and the environmental hazardous consequences of chromium containing effluents. In order to overcome this impediment, a great deal of research has been focused on developing chrome–free tanning methods in the past years, such as titanium tanning. In the present study, Ti–Al tanned bovine leather was characterized by means of SEM microscopy, EDAX elemental analysis, ATR–FTIR spectroscopy, thermogravimetry TGA, and differential scanning calorimetry DSC techniques.

  9. Evaluation of the efficiency and safety in cosmetic products.

    Science.gov (United States)

    Uckaya, Meryem; Uckaya, Fatih; Demir, Nazan; Demir, Yasar

    2016-02-29

    Chemicals used in cosmetics have to interact with enzymes for beneficial or destroy purpose after they enter in our body. Active sections of enzymes that catalyze reactions have three dimensions and they are active optically. When these limitations of catalytic sections are considered, it may be considered that defining geometric specifications of chemical materials and functional groups they contain may contribute on safety evaluations of cosmetic products. In this study, defining similarities and differences of geometric structures of chemicals that are prohibited to be used in cosmetic products and chemical that are allowed to be used by using group theory and analyze of functional groups that are often encountered in these chemicals are aimed. Molecule formulas related to chemical material of, 276 pieces chemicals that are prohibited to be used in cosmetic products and 65 pieces chemicals that are allowed, are used as the material. Two and three-dimension structures of these formulas are drawn and types and quantity of functional groups they contain are defined. And as a method, freeware (Free Trial) version of "Chem-BioOffice Ultra 13.0 Suite" chemical drawing program to draw two and three-dimension of formulas, "Campus-Licensed" version that are provided for use by our university of "Autodesk 3DS Max" for three-dimension drawings are used. In order to analyze geometric specifications of drawn molecules according to Group Theory and define type and quantity of available functional groups, Excel applications developed by Prof. Dr. Yaşar Demir are used. Copyright © 2016 Elsevier B.V. All rights reserved.

  10. A model for store handling : potential for efficiency improvement

    NARCIS (Netherlands)

    Zelst, van S.M.; Donselaar, van K.H.; Woensel, van T.; Broekmeulen, R.A.C.M.; Fransoo, J.C.

    2005-01-01

    In retail stores, handling of products typically forms the largest share of the operational costs. The handling activities are mainly the stacking of the products on the shelves. While the impact of these costs on the profitability of a store is substantial, there are no models available of the

  11. An architecture for efficient reuse in flexible production scenarios

    DEFF Research Database (Denmark)

    Andersen, Rasmus Hasle; Dalgaard, Lars; Beck, Anders Billesø

    2015-01-01

    Traditionally, small batch production has not been automated - it has been too resource demanding compared to the expected benefit. However, this is set to change with the new developments in easily trainable robotic co-worker systems, capable of being adapted to new tasks through intuitive user....... We present the DTI Robot CoWorker architecture, which is a generic robotic architecture, which provides a system-independent execution framework for adaptive and interactive robotic applications. Our approach has proven viable as we have successfully automated a complicated integration task (among...

  12. Modeling Techniques for a Computational Efficient Dynamic Turbofan Engine Model

    Directory of Open Access Journals (Sweden)

    Rory A. Roberts

    2014-01-01

    Full Text Available A transient two-stream engine model has been developed. Individual component models developed exclusively in MATLAB/Simulink including the fan, high pressure compressor, combustor, high pressure turbine, low pressure turbine, plenum volumes, and exit nozzle have been combined to investigate the behavior of a turbofan two-stream engine. Special attention has been paid to the development of transient capabilities throughout the model, increasing physics model, eliminating algebraic constraints, and reducing simulation time through enabling the use of advanced numerical solvers. The lessening of computation time is paramount for conducting future aircraft system-level design trade studies and optimization. The new engine model is simulated for a fuel perturbation and a specified mission while tracking critical parameters. These results, as well as the simulation times, are presented. The new approach significantly reduces the simulation time.

  13. EFFICIENCY AND COST MODELLING OF THERMAL POWER PLANTS

    Directory of Open Access Journals (Sweden)

    Péter Bihari

    2010-01-01

    Full Text Available The proper characterization of energy suppliers is one of the most important components in the modelling of the supply/demand relations of the electricity market. Power generation capacity i. e. power plants constitute the supply side of the relation in the electricity market. The supply of power stations develops as the power stations attempt to achieve the greatest profit possible with the given prices and other limitations. The cost of operation and the cost of load increment are thus the most important characteristics of their behaviour on the market. In most electricity market models, however, it is not taken into account that the efficiency of a power station also depends on the level of the load, on the type and age of the power plant, and on environmental considerations. The trade in electricity on the free market cannot rely on models where these essential parameters are omitted. Such an incomplete model could lead to a situation where a particular power station would be run either only at its full capacity or else be entirely deactivated depending on the prices prevailing on the free market. The reality is rather that the marginal cost of power generation might also be described by a function using the efficiency function. The derived marginal cost function gives the supply curve of the power station. The load level dependent efficiency function can be used not only for market modelling, but also for determining the pollutant and CO2 emissions of the power station, as well as shedding light on the conditions for successfully entering the market. Based on the measurement data our paper presents mathematical models that might be used for the determination of the load dependent efficiency functions of coal, oil, or gas fuelled power stations (steam turbine, gas turbine, combined cycle and IC engine based combined heat and power stations. These efficiency functions could also contribute to modelling market conditions and determining the

  14. Efficient operation of a multi-purpose reservoir in Chile: Tradeoffs between irrigation and hydropower production

    Science.gov (United States)

    Gonzalez Cabrera, J. M., Sr.; Olivares, M. A.

    2015-12-01

    This study proposes a method to develop efficient operational policies for a reservoir the southern Chile. The main water uses in this system are hydropower and irrigation, with conflicting seasonal demands. The conflict between these two uses is currently managed through a so-called "irrigation agreement" which defines a series of operational conditions on the reservoir by restricting volumes used for power production depending on reservoir storage level. Other than that, the reservoir operation is driven by cost-minimization over the power grid. Recent evidence shows an increasing degree of conflict in this basin, which suggests that the static approach of irrigation agreements, might no longer be appropriate. Moreover, this agreement could be revised in light of decreased water availability. This problem poses a challenge related to the spatial scope of analysis. Thus, irrigation benefits are driven by decisions made within the basin, whereas hydropower benefits depend on the operation of the entire power grid. Exploring the tradeoffs between these two water uses involves modeling both scales. The proposed methodology integrates information from both a grid-wide power operations model and a basin-wide agro-economic model into a decision model for optimal reservoir operation. The first model, a hydrothermal coordination tool, schedules power production by each plant in the grid, and allows capturing technical and economic aspects to the operation of hydropower reservoirs. The agro-economic model incorporates economic features of irrigation in the basin, and allows obtaining irrigation water demand functions. Finally, the results of both models are integrated into a single model for optimal reservoir operation considering the tradeoffs between the two uses. The result of the joint operation of water resources, show a flexible coordination of uses, revealing the opportunity cost of irrigation, which it gives the possibility of negotiating transfers of water to

  15. Efficient approach for bioethanol production from red seaweed Gelidium amansii.

    Science.gov (United States)

    Kim, Ho Myeong; Wi, Seung Gon; Jung, Sera; Song, Younho; Bae, Hyeun-Jong

    2015-01-01

    Gelidium amansii (GA), a red seaweed species, is a popular source of food and chemicals due to its high galactose and glucose content. In this study, we investigated the potential of bioethanol production from autoclave-treated GA (ATGA). The proposed method involved autoclaving GA for 60min for hydrolysis to glucose. Separate hydrolysis and fermentation processing (SHF) achieved a maximum ethanol concentration of 3.33mg/mL, with a conversion yield of 74.7% after 6h (2% substrate loading, w/v). In contrast, simultaneous saccharification and fermentation (SSF) produced an ethanol concentration of 3.78mg/mL, with an ethanol conversion yield of 84.9% after 12h. We also recorded an ethanol concentration of 25.7mg/mL from SSF processing of 15% (w/v) dry matter from ATGA after 24h. These results indicate that autoclaving can improve the glucose and ethanol conversion yield of GA, and that SSF is superior to SHF for ethanol production. Copyright © 2014 Elsevier Ltd. All rights reserved.

  16. Improvement of uranium production efficiency to meet China's nuclear power requirements

    International Nuclear Information System (INIS)

    Zhang, R.

    1997-01-01

    Recently China put the Qinshan Nuclear Power Plant, with an installed capacity of 300 MW, in the province of Zhejiang and the Daya Bay Nuclear Power Plant, with a total installed capacity of 2 x 900 MW, in commercial operation. China plans a rapid growth in nuclear power from 1995 to 2010. China's uranium production will therefore also enter a new period with nuclear power increasing. In order to meet the demand of nuclear power for uranium special attention has been paid to both technical progress improvement using management with the aim of reducing the cost of uranium production. The application of the trackless mining technique has enhanced the uranium mining productivity significantly. China has produced a radiometric sorter, model 5421-2 for pre-concentrating uranium run-of-mine ore. This effectively increases the uranium content in mill feed and decreases the operating cost of hydrometallurgical treatment. The in situ leach technique after blasting is applied underground in the Lantian Mine, in addition to the surface heap leaching, and has obtained a perfect result. The concentrated acid-curing, and ferric sulphate trickle leaching process, will soon be used in commercial operation for treating uranium ore grading -5 to -7 mm in size. The annual production capability of the Yining Mine will be extended to 100 tonnes U using improving in situ leaching technology. For the purpose of improving the uranium production efficiency much work has been done optimizing the distribution of production centres. China plans to expand its uranium production to meet the uranium requirements of the developing nuclear power plants. (author). 4 tabs

  17. The technology gap and efficiency measure in WEC countries: Application of the hybrid meta frontier model

    International Nuclear Information System (INIS)

    Chiu, Yung-Ho; Lee, Jen-Hui; Lu, Ching-Cheng; Shyu, Ming-Kuang; Luo, Zhengying

    2012-01-01

    This study develops the hybrid meta frontier DEA model for which inputs are distinguished into radial inputs that change proportionally and non-radial inputs that change non-proportionally, in order to measure the technical efficiency and technology gap ratios (TGR) of four different regions: Asia, Africa, America, and Europe. This paper selects 87 countries that are members of the World Energy Council from 2005 to 2007. The input variables are industry and population, while the output variances are gross domestic product (GDP) and the amount of fossil-fuel CO 2 emissions. The result shows that countries’ efficiency ranking among their own region presents more implied volatility. In view of the Technology Gap Ratio, Europe is the most efficient of any region, but during the same period, Asia has a lower efficiency than other regions. Finally, regions with higher industry (or GDP) might not have higher efficiency from 2005 to 2007. And higher CO 2 emissions or population also might not mean lower efficiency for other regions. In addition, Brazil is not OECD member, but it is higher efficiency than other OECD members in emerging countries case. OECD countries are better efficiency than non-OECD countries and Europe is higher than Asia to control CO 2 emissions. If non-OECD countries or Asia countries could reach the best efficiency score, they should try to control CO 2 emissions. - Highlights: ► The new meta frontier Model for evaluating the efficiency and technology gap ratios. ► Higher CO 2 emissions might not lower efficiency than any other regions, like Europe. ► Asia’s output and CO 2 emissions simultaneously increased and lower of its efficiency. ► Non-OECD or Asia countries should control CO 2 emissions to reach best efficiency score.

  18. Efficiency in the use of radiation and primary productivity on forage resources in eastern Uruguay

    International Nuclear Information System (INIS)

    Baeza, S.; Paruelo, J.; Ayala, Walter

    2011-01-01

    Aboveground Net Primary Productivity (ANPP) is one of the most important ecosystem attributes, and the main control of stock density on grasslands. Traditionally it has been estimated from based on periodical biomass harvest. Spectral information allows estimating ANPP at low cost and in real time over large areas. This requires the calibration of models that relate spectral information and field estimates of ANPP, quantifying a key factor in this relationship: the conversion efficiency of radiation into biomass (Radiation Use Efficiency: RUE). In this work, we combined field ANPP estimates with data from satellite imagery and weather stations to estimate EUR and generate models to estimate ANPP in real time in natural grasslands with and without legumes overseeding, of the Sierras y Lomadas del Este region. RUE was 0.24 g MS/MJ for natural grassland, while sowed grassland EUR was approximately twice, depending on the system analyzed. ANPP models explained 70 and 58% of the variance of the data (p <0.001), with prediction r2 of 0,67 and 0.55 (p <0.001), to natural grasslands with and without legumes overseeding, respectively

  19. A grand model for chemical product design

    DEFF Research Database (Denmark)

    Fung, Ka Y.; Ng, Ka M.; Zhang, Lei

    2016-01-01

    , a pricing model, an economic model as well as factors such as company strategy, government policies and regulations. This article introduces the model and highlights selected aspects of the model with two case studies. One is a die attach adhesive that illustrates how pricing affects profitability, and how...... product composition changes with market conditions. Another is a hand lotion that illustrates how product quality affects the profit.(C) 2016 Elsevier Ltd. All rights reserved....

  20. Efficient Business Service Consumption by Customization with Variability Modelling

    Directory of Open Access Journals (Sweden)

    Michael Stollberg

    2010-07-01

    Full Text Available The establishment of service orientation in industry determines the need for efficient engineering technologies that properly support the whole life cycle of service provision and consumption. A central challenge is adequate support for the efficient employment of komplex services in their individual application context. This becomes particularly important for large-scale enterprise technologies where generic services are designed for reuse in several business scenarios. In this article we complement our work regarding Service Variability Modelling presented in a previous publication. There we presented an approach for the customization of services for individual application contexts by creating simplified variants, based on model-driven variability management. That work presents our revised service variability metamodel, new features of the variability tools and an applicability study, which reveals that substantial improvements on the efficiency of standard business service consumption under both usability and economic aspects can be achieved.

  1. Energetics and efficiency of a molecular motor model

    International Nuclear Information System (INIS)

    Fogedby, Hans C; Svane, Axel

    2013-01-01

    The energetics and efficiency of a linear molecular motor model proposed by Mogilner et al are analyzed from an analytical point of view. The model, which is based on protein friction with a track, is described by coupled Langevin equations for the motion in combination with coupled master equations for the ATP hydrolysis. Here the energetics and efficiency of the motor are addressed using a many body scheme with focus on the efficiency at maximum power (EMP). It is found that the EMP is reduced from about 10% in a heuristic description of the motor to about 1 per mille when incorporating the full motor dynamics, owing to the strong dissipation associated with the motor action. (paper)

  2. Efficiency and productivity analysis of the interstate bus transportation industry in Brazil

    Directory of Open Access Journals (Sweden)

    Antonio G.N. Novaes

    2010-08-01

    Full Text Available Productivity analysis is an important policy making and managerial control tool for assessing the degree to which inputs are utilized in the process of obtaining desired outputs. Data Envelopment Analysis (DEA is a non-parametric method based on piecewise linear frontiers estimated with the aid of mathematical programming techniques and used, in this paper, to investigate technical, scale and managerial efficiencies associated with interstate bus companies in Brazil (ISBT. Data has been obtained from the web-site of the Brazilian National Agency of Land Transportation (ANTT. Since production factors in the application are constrained by technical and operational reasons, weight restrictions were introduced into the DEA models. The analysis has shown three groups of non-efficient bus firms, with clear differences in productivity. The relative managerial efficiencies of the firms in the non-efficient groups were also computed and analyzed. Finally, an example of benchmarking a non-efficient firm with DEA is presented.A análise de produtividade é ferramenta importante para a tomada de decisão e para a gestão de organizações, possibilitando avaliar os efeitos dos inputs na obtenção de níveis desejados de outputs. A Análise Envoltória de Dados (DEA é um método não paramétrico baseado em fronteiras lineares por partes ajustadas através de programação matemática e utilizada para analisar as eficiências técnica, de escala e de gestão de empresas de ônibus que operam nas ligações interestaduais no Brasil (ISBT. Os dados foram obtidos no web-site da Agência Nacional de Transportes Terrestres (ANTT. Como os fatores de produção são restritos por razões técnicas e operacionais, restrições de pesos foram introduzidas nos modelos. A análise mostrou três grupos de empresas não eficientes, com claras diferenças de produtividade. Também são calculadas as eficiências de gestão relativas a esses três grupos. Finalmente

  3. Development of an eco- and material-efficient pellet production chain. A chemical study

    Energy Technology Data Exchange (ETDEWEB)

    Kuokkanen, M.

    2013-06-01

    According to the EU's strategy and the corresponding Finnish national strategy on waste materials, all kinds of waste must be utilised primarily as material (reuse, recycling) and secondarily as energy, and at the lowest level of waste hierarchy is their disposal using environmentally friendly methods. Today material efficiency is an essential topic in promoting sustainable use of natural resources, industrial by-products and waste material. The present goal proposed by the EU sets the target for the total proportion of renewable energy as high as 38% by 2020 in Finland. Up to 20 million tonnes of waste wood biomass per year are left unused in Finland, mainly in the forests during forestry operations, because supply and demand do not meet. As a consequence of high heat energy prices, the looming threat of climate change, the greenhouse effect and global as well as national demands to considerably increase the proportion of renewable energy, Finland currently has a tremendous interest in increasing decentralised pellet production alongside of large-scale factories. The aim of this thesis is to promote the development of eco-, material- and cost-efficient Nordic wood-based pellet production and utilisation of pellet bio-ash by means of chemical research. Using Finnish wood (sawdust and shavings) as a model raw material, the total functionality of a pilot-scale pellet facility combined with an extensive chemical toolbox was tested in this study to promote development of an eco-, material- and cost-efficient wood-based pellet production chain. The chemical toolbox includes measurements of moisture content, density, heat value, mechanical durability and particle size distribution, TG analysis and elementary analysis, as well as new applications for pellet biodegradation using BOD OxiTop equipment and optical microscopic staining methods. To improve the quality of pellets, considering the profitability of production and occupational safety factors (wood dust

  4. Efficient production of ultrapure manganese oxides via electrodeposition.

    Science.gov (United States)

    Cheney, Marcos A; Joo, Sang Woo; Banerjee, Arghya; Min, Bong-Ki

    2012-08-01

    A new process for the production of electrolytic amorphous nanomanganese oxides (EAMD) with uniform size and morphology is described. EAMD are produced for the first time by cathodic deposition from a basic aqueous solution of potassium permanganate at a constant temperature of 16°C. The synthesized materials are characterized by XRD, SEM, TEM, and HRTEM. The materials produced at 5.0 V at constant temperature are amorphous with homogeneous size and morphology with an average particle size around 20 nm, which appears to be much lesser than the previously reported anodic EAMD. A potentiostatic electrodeposition with much lesser deposition rate (with respect to previously reported anodic depositions) is considered to be the reason behind the very low and homogenous particle size distribution due to the lesser agglomeration of our as-synthesized nanoparticles. Copyright © 2012 Elsevier Inc. All rights reserved.

  5. Efficient lactulose production from cheese whey using sodium carbonate.

    Science.gov (United States)

    Seo, Yeong Hwan; Park, Gwon Woo; Han, Jong-In

    2015-04-15

    An economical method of lactulose production from cheese whey was developed using sodium carbonate (Na2CO3). Three parameters such as temperature, reaction time, and Na2CO3 concentration were identified as experimental factors, and yield was selected as a response parameter. The experimental factors were optimised employing Response Surface Methodology (RSM). Maximum yield of 29.6% was obtained at reaction time of 20.41 min, Na2CO3 of 0.51% at 90 °C. To overcome this limited lactulose yield, due to the conversion of lactulose to galactose, fed batch system was applied using dried cheese whey as lactose source. By this system, limit was broken, and 15.8 g/L of lactulose is produced in hour. Copyright © 2014 Elsevier Ltd. All rights reserved.

  6. Efficient Adoption and Assessment of Multiple Process Improvement Reference Models

    Directory of Open Access Journals (Sweden)

    Simona Jeners

    2013-06-01

    Full Text Available A variety of reference models such as CMMI, COBIT or ITIL support IT organizations to improve their processes. These process improvement reference models (IRMs cover different domains such as IT development, IT Services or IT Governance but also share some similarities. As there are organizations that address multiple domains and need to coordinate their processes in their improvement we present MoSaIC, an approach to support organizations to efficiently adopt and conform to multiple IRMs. Our solution realizes a semantic integration of IRMs based on common meta-models. The resulting IRM integration model enables organizations to efficiently implement and asses multiple IRMs and to benefit from synergy effects.

  7. Development of an eco-efficient product/process for the vulcanising industry

    Directory of Open Access Journals (Sweden)

    Becerra, M. B.

    2014-08-01

    Full Text Available This paper presents the development of an eco-efficient product/process, which has improved mechanical properties from the introduction of natural fibres in the EPDM (Ethylene-Propylene-Diene-Terpolymer rubber formulation. The optimisation analysis is made by a fractional factorial design 211-7. Different formulations were evaluated using a multi-response desirability function, with the aim of finding efficient levels for the manufacturing time-cycle, improving the mechanical properties of the product, and reducing the raw material costs. The development of an eco-efficient product/process generates a sustainable alternative to conventional manufacturing.

  8. Efficient Use of Preisach Hysteresis Model in Computer Aided Design

    Directory of Open Access Journals (Sweden)

    IONITA, V.

    2013-05-01

    Full Text Available The paper presents a practical detailed analysis regarding the use of the classical Preisach hysteresis model, covering all the steps, from measuring the necessary data for the model identification to the implementation in a software code for Computer Aided Design (CAD in Electrical Engineering. An efficient numerical method is proposed and the hysteresis modeling accuracy is tested on magnetic recording materials. The procedure includes the correction of the experimental data, which are used for the hysteresis model identification, taking into account the demagnetizing effect for the sample that is measured in an open-circuit device (a vibrating sample magnetometer.

  9. Efficient production of Aschersonia placenta protoplasts for transformation using optimization algorithms.

    Science.gov (United States)

    Wei, Xiuyan; Song, Xinyue; Dong, Dong; Keyhani, Nemat O; Yao, Lindan; Zang, Xiangyun; Dong, Lili; Gu, Zijian; Fu, Delai; Liu, Xingzhong; Qiu, Junzhi; Guan, Xiong

    2016-07-01

    The insect pathogenic fungus Aschersonia placenta is a highly effective pathogen of whiteflies and scale insects. However, few genetic tools are currently available for studying this organism. Here we report on the conditions for the production of transformable A. placenta protoplasts using an optimized protocol based on the response surface method (RSM). Critical parameters for protoplast production were modelled by using a Box-Behnken design (BBD) involving 3 levels of 3 variables that was subsequently tested to verify its ability to predict protoplast production (R(2) = 0.9465). The optimized conditions resulted in the highest yield of protoplasts ((4.41 ± 0.02) × 10(7) cells/mL of culture, mean ± SE) when fungal cells were treated with 26.1 mg/mL of lywallzyme for 4 h of digestion, and subsequently allowed to recover for 64.6 h in 0.7 mol/L NaCl-Tris buffer. The latter was used as an osmotic stabilizer. The yield of protoplasts was approximately 10-fold higher than that of the nonoptimized conditions. Generated protoplasts were transformed with vector PbarGPE containing the bar gene as the selection marker. Transformation efficiency was 300 colonies/(μg DNA·10(7) protoplasts), and integration of the vector DNA was confirmed by PCR. The results show that rational design strategies (RSM and BBD methods) are useful to increase the production of fungal protoplasts for a variety of downstream applications.

  10. Technical efficiency of certified maize seed in Palpa district, Nepal: A stochastic frontier production approach

    Directory of Open Access Journals (Sweden)

    Mahima Bajracharya

    2017-12-01

    Full Text Available The cereal crop, maize is regarded as staple food mainly in hill areas of Nepal. Seed is one of the vital input which determines the production and yield of any crop. Farmers are found using the required inputs in haphazard way which had increased the cost of production and inefficiency of resources used. The study on seed sector is limited. For such a backdrop, this study was aimed to assess the level of technical efficiency (TE of certified maize seed production. The total of 164 certified seed producer were interviewed in June, 2016 using simple random sampling technique in Palpa district of Nepal. The result revealed that increase in amount of seed and labor by one percent would increase the yield of certified maize seed by 0.29 and 0.34 percent respectively. The TE was estimated using stochastic production frontier model in Stata software. The average TE was found 70 percent which revealed the scope of increasing TE by 30 percent using the existing available resources. There were about 29 percent farmers who had TE of ≥0.7-0.8 followed by 27.44 percent at ≥0.8-0.9. Government and other stakeholders should prioritize to provide technical knowledge via training and increase the visit of extension worker to increase TE of certified maize seed producer in the district.

  11. Classification hierarchies for product data modelling

    NARCIS (Netherlands)

    Pels, H.J.

    2006-01-01

    Abstraction is an essential element in data modelling that appears mainly in one of the following forms: generalisation, classification or aggregation. In the design of complex products classification hierarchies can be found product families that are viewed as classes of product types, while

  12. Operator-based linearization for efficient modeling of geothermal processes

    OpenAIRE

    Khait, M.; Voskov, D.V.

    2018-01-01

    Numerical simulation is one of the most important tools required for financial and operational management of geothermal reservoirs. The modern geothermal industry is challenged to run large ensembles of numerical models for uncertainty analysis, causing simulation performance to become a critical issue. Geothermal reservoir modeling requires the solution of governing equations describing the conservation of mass and energy. The robust, accurate and computationally efficient implementation of ...

  13. Energetics and efficiency of a molecular motor model

    DEFF Research Database (Denmark)

    C. Fogedby, Hans; Svane, Axel

    2013-01-01

    The energetics and efficiency of a linear molecular motor model proposed by Mogilner et al. (Phys. Lett. 237, 297 (1998)) is analyzed from an analytical point of view. The model which is based on protein friction with a track is described by coupled Langevin equations for the motion in combination...... when incorporating the full motor dynamics, owing to the strong dissipation associated with the motor action....

  14. Allocative Efficiency Analysys Production Function Of Cassava Farming (Manihot, Sp.) In Tenayan Raya Sub-District Of Pekanbaru City

    Science.gov (United States)

    Nizar, Rini; Nurwati, Niken; Amalia

    2017-12-01

    Cassava (Manihot sp) has long been known and cultivated by Indonesian farmers. The economic and social potential of cassava aside from foodstuffs can also be used as raw materials for industrial use and animal feed. In Riau Province, Cassva has the potential to be developed considering Cassva is a plant that can easily grow on low altitude to high altitude lands. Cassava does not need a complex maintenance. Conventionally, this plant can be planted and left alone by itself. Cassava roots can be developed to be a processed products that society needs as main foodstuffs ingredients. This research is done in three months and the purpose is to know the influence of input use (pesticide, seeds, fertilizers and labor) on cassava farming to cassava farming by the model of cobb-douglas. Other than that is also the effect on economical efficiency. The method used in this research is a quantitative research by using Cobb-Douglas Function Model. This research was done in the Tenayan Raya sub-district with 55 farmer samples. This research shows Cobb-Douglas Production Function can be used as the predictor for Cassava production function in Tenayan Raya Sub-district of Pekanbaru City. Altogether the production factor used by farmers influence production. Partially only usage of organic fertilizer that does not affect production, while other production factor such as, seeds, pesticides, an-organic fertilizer (urea) and labor affect production by quite a bit. Usage of production factor seeds, urea and pesticides is not yet efficient while usage of organic fertilizer is not efficient and usage of labor on cassava agriculture by respondent farmers is relatively efficient

  15. Estimating the Efficiency and Impacts of Petroleum Product Pricing Reforms in China

    Directory of Open Access Journals (Sweden)

    Chuxiong Deng

    2018-04-01

    Full Text Available The efficiency and effects analysis of a new pricing mechanism would have significant policy implications for the further design of a pricing mechanism in an emerging market. Unlike most of the existing literature, which focuses on the impacts to the macro-economy, this paper firstly uses an econometrics model to discuss the efficiency of the new pricing mechanism, and then establishes an augmented Phillips curve to estimate the impact of pricing reform on inflation in China. The results show that: (1 the new pricing mechanism would strengthen the linkage between Chinese oil prices and international oil prices; (2 oil price adjustments are still inadequate in China. (3 The lag in inflation is the most important factor that affects inflation, while the impact of the Chinese government’s price adjustments on inflation is limited and insignificant. In order to improve the efficiency of the petroleum products pricing mechanism and shorten lags, government should shorten the adjustment period and diminish the fluctuation threshold.

  16. Using supervised environmental composites in production and efficiency analyses. An application to Norwegian electricity networks

    Energy Technology Data Exchange (ETDEWEB)

    Orea, Luis [Oviedo Univ. (Spain). Oviedo Efficiency Group; Growitsch, Christian [Koeln Univ. (Germany). Energiewirtschaftliches Inst.; Jamasb, Tooraj [Heriot-Watt Univ., Edinburgh (United Kingdom). Dept. of Economics

    2012-12-15

    Supervised dimension reduction methods have been extensively applied in different scientific fields like biology and medicine in recent years. However, they have hardly ever been used in micro economics, and in particular cost function modeling. Nonetheless, these methods can also be useful in regulation of natural monopolies such as gas, water, and electricity networks, where firms' cost and performance can be affected by a large number of environmental factors. In order to deal with this 'dimensionality' problem we propose using a supervised dimension reduction approach that aims to reduce the dimension of data without loss of information. Economic theory suggests that in the presence of other relevant production (cost) drivers, the traditional all-inclusive assumption is not satisfied and, hence, production or cost predictions (and efficiency estimates) might be biased. This paper shows that purging the data using a partial regression approach allows us to address this issue when analyzing the effect of weather and geography on cost efficiency in the context of the Norwegian electricity distribution networks.

  17. Marketing Modeling for New Products

    NARCIS (Netherlands)

    C. Hernández-Mireles (Carlos)

    2010-01-01

    textabstractThis thesis addresses the analysis of new or very recent marketing data and the introduction of new marketing models. We present a collection of models that are useful to analyze (1) the optimal launch time of new and dominant technologies, (2) the triggers, speed and timing of new

  18. Highly efficient photochemical HCOOH production from CO2 and water using an inorganic system

    Directory of Open Access Journals (Sweden)

    Satoshi Yotsuhashi

    2012-12-01

    Full Text Available We have constructed a system that uses solar energy to react CO2 with water to generate formic acid (HCOOH at an energy conversion efficiency of 0.15%. It consists of an AlGaN/GaN anode photoelectrode and indium (In cathode that are electrically connected outside of the reactor cell. High energy conversion efficiency is realized due to a high quantum efficiency of 28% at 300 nm, attributable to efficient electron-hole separation in the semiconductor's heterostructure. The efficiency is close to that of natural photosynthesis in plants, and what is more, the reaction product (HCOOH can be used as a renewable energy source.

  19. Industry efficiency and total factor productivity growth under resources and environmental constraint in China.

    Science.gov (United States)

    Tao, Feng; Li, Ling; Xia, X H

    2012-01-01

    The growth of China's industry has been seriously depending on energy and environment. This paper attempts to apply the directional distance function and the Luenberger productivity index to measure the environmental efficiency, environmental total factor productivity, and its components at the level of subindustry in China over the period from 1999 to 2009 while considering energy consumption and emission of pollutants. This paper also empirically examines the determinants of efficiency and productivity change. The major findings are as follows. Firstly, the main sources of environmental inefficiency of China's industry are the inefficiency of gross industrial output value, the excessive energy consumption, and pollutant emissions. Secondly, the highest growth rate of environmental total factor productivity among the three industrial categories is manufacturing, followed by mining, and production and supply of electricity, gas, and water. Thirdly, foreign direct investment, capital-labor ratio, ownership structure, energy consumption structure, and environmental regulation have varying degrees of effects on the environmental efficiency and environmental total factor productivity.

  20. Production and efficiency of large wildland fire suppression effort: A stochastic frontier analysis.

    Science.gov (United States)

    Katuwal, Hari; Calkin, David E; Hand, Michael S

    2016-01-15

    This study examines the production and efficiency of wildland fire suppression effort. We estimate the effectiveness of suppression resource inputs to produce controlled fire lines that contain large wildland fires using stochastic frontier analysis. Determinants of inefficiency are identified and the effects of these determinants on the daily production of controlled fire line are examined. Results indicate that the use of bulldozers and fire engines increase the production of controlled fire line, while firefighter crews do not tend to contribute to controlled fire line production. Production of controlled fire line is more efficient if it occurs along natural or built breaks, such as rivers and roads, and within areas previously burned by wildfires. However, results also indicate that productivity and efficiency of the controlled fire line are sensitive to weather, landscape and fire characteristics. Copyright © 2015 Elsevier Ltd. All rights reserved.

  1. Geometric Modeling and Reasoning of Human-Centered Freeform Products

    CERN Document Server

    Wang, Charlie C L

    2013-01-01

    The recent trend in user-customized product design requires the shape of products to be automatically adjusted according to the human body’s shape, so that people will feel more comfortable when wearing these products.  Geometric approaches can be used to design the freeform shape of products worn by people, which can greatly improve the efficiency of design processes in various industries involving customized products (e.g., garment design, toy design, jewel design, shoe design, and design of medical devices, etc.). These products are usually composed of very complex geometric shapes (represented by free-form surfaces), and are not driven by a parameter table but a digital human model with free-form shapes or part of human bodies (e.g., wrist, foot, and head models).   Geometric Modeling and Reasoning of Human-Centered Freeform Products introduces the algorithms of human body reconstruction, freeform product modeling, constraining and reconstructing freeform products, and shape optimization for improving...

  2. Efficient distribution of toy products using ant colony optimization algorithm

    Science.gov (United States)

    Hidayat, S.; Nurpraja, C. A.

    2017-12-01

    CV Atham Toys (CVAT) produces wooden toys and furniture, comprises 13 small and medium industries. CVAT always attempt to deliver customer orders on time but delivery costs are high. This is because of inadequate infrastructure such that delivery routes are long, car maintenance costs are high, while fuel subsidy by the government is still temporary. This study seeks to minimize the cost of product distribution based on the shortest route using one of five Ant Colony Optimization (ACO) algorithms to solve the Vehicle Routing Problem (VRP). This study concludes that the best of the five is the Ant Colony System (ACS) algorithm. The best route in 1st week gave a total distance of 124.11 km at a cost of Rp 66,703.75. The 2nd week route gave a total distance of 132.27 km at a cost of Rp 71,095.13. The 3rd week best route gave a total distance of 122.70 km with a cost of Rp 65,951.25. While the 4th week gave a total distance of 132.27 km at a cost of Rp 74,083.63. Prior to this study there was no effort to calculate these figures.

  3. Controlling cell volume for efficient PHB production by Halomonas.

    Science.gov (United States)

    Jiang, Xiao-Ran; Yao, Zhi-Hao; Chen, Guo-Qiang

    2017-11-01

    Bacterial morphology is decided by cytoskeleton protein MreB and cell division protein FtsZ encoded by essential genes mreB and ftsZ, respectively. Inactivating mreB and ftsZ lead to increasing cell sizes and cell lengths, respectively, yet seriously reduce cell growth ability. Here we develop a temperature-responsible plasmid expression system for compensated expression of relevant gene(s) in mreB or ftsZ disrupted recombinants H. campaniensis LS21, allowing mreB or ftsZ disrupted recombinants to grow normally at 30°C in a bioreactor for 12h so that a certain cell density can be reached, followed by 36h cell size expansions or cell shape elongations at elevated 37°C at which the mreB and ftsZ encoded plasmid pTKmf failed to replicate in the recombinants and thus lost themselves. Finally, 80% PHB yield increase was achieved via controllable morphology manipulated H. campaniensis LS21. It is concluded that controllable expanding cell volumes (widths or lengths) provides more spaces for accumulating more inclusion body polyhydroxybutyrate (PHB) and the resulting cell gravity precipitation benefits the final separation of cells and product during downstream. Copyright © 2017 International Metabolic Engineering Society. Published by Elsevier Inc. All rights reserved.

  4. Increasing the productive efficiency of carabaos under smallholder farming systems

    International Nuclear Information System (INIS)

    Momongan, V.G.; Sarabia, A.S.; Roxas, N.P.; Palad, O.A.; Obsioma, A.R.; Nava, Z.M.; Del Barrio, A.N.

    1990-01-01

    There is a need to improve the reproductive efficiency of carabaos to meet the increasing demand for draught power, meat and milk. Under village conditions carabaos appear to have a pregnancy rate of 17.7%; this could be attributed greatly to tethering management, which prevents their natural breeding activities. Moreover, about 32% of the breedable female carabaos are acyclic and only 3.5% are in oestrus at any one time. Carabaos which are either cycling or pregnant have a better body condition than those which are acyclic or non-pregnant. The plasma progesterone level was very low at the time of insemination (<0.5 ng/mL), but gradually increased to above 2.0 ng/mL during the first and second trimesters of pregnancy. Thus, it was possible to diagnose early pregnancy and to confirm oestrus. A positive correlation was observed between plasma and milk progesterone concentrations during the oestrous cycle (r=0.60) and pregnancy (r=0.50). Oestrus synchronization was found to be a useful tool in implementing the cross-breeding of Philippine carabaos with riverine buffaloes through artificial insemination; an average pregnancy rate of about 30% was obtained using frozen semen. The performance of cross-breds showed that the weights at birth were about 36.0 ± 0.9 kg for Phil-Ravi, 33.6 ± 0.9 kg for Phil-Murrah compared with 26.8 ± 0.9 kg for Philippine carabaos. The weights of the three genotypes at 12 months were: 157.0 ± 9.8 kg for Philippine carabaos, 215.4 ± 7.7 kg for Phil-Ravi and 199.8 ± 12.1 kg for Phil-Murrah. At 2 years of age, the carabaos weighed 217.3 ± 18.6 kg, Phil-Ravi 365 ± 23.4 kg and Phil-Murrah 366.3 ± 19.4 kg. The results of this study show that progesterone measurement and oestrus synchronization can be used effectively for cross-breeding carabaos with the frozen semen of river buffaloes. (author). 9 refs, 5 figs, 4 tabs

  5. The productive efficiency of organic farming: the case of grape sector in Catalonia

    Energy Technology Data Exchange (ETDEWEB)

    Guesmi, B.; Serra, T.; Kallas, Z.; Gil Roig, J. M.

    2012-11-01

    Knowledge about productivity and efficiency differences between conventional and organic farms has important implications for the evaluation of the economic viability of these two agricultural practices. The main purpose of this study was to compare the efficiency ratings of organic and conventional grape farms in Catalonia. To do so, we fit a stochastic production frontier to cross sectional, farm-level data collected from a sample of 141 Catalan farms that specialize in grape growing. Results show that organic farmers, on average, are more efficient than their conventional counterparts (efficiency ratings are on the order of 0.80 and 0.64, respectively). Apart from adoption of organic practices, experience is also found to improve technical efficiency. Conversely, technical efficiency tends to decrease with the relevance of unpaid family labor, farm location in less favored areas, and farmers strong environmental preservation preferences. (Author) 41 refs.

  6. Resource Use Efficiency in Part-time Food Crop Production: The ...

    African Journals Online (AJOL)

    Analysis of inefficiency factors reveal the significant inefficiency variables to include; level of education, household size ... Economic efficiency is a product of technical and allocative ... the work of Chava and Aliber (1983) and Chava and Cox ...

  7. Efficient Parallel Statistical Model Checking of Biochemical Networks

    Directory of Open Access Journals (Sweden)

    Paolo Ballarini

    2009-12-01

    Full Text Available We consider the problem of verifying stochastic models of biochemical networks against behavioral properties expressed in temporal logic terms. Exact probabilistic verification approaches such as, for example, CSL/PCTL model checking, are undermined by a huge computational demand which rule them out for most real case studies. Less demanding approaches, such as statistical model checking, estimate the likelihood that a property is satisfied by sampling executions out of the stochastic model. We propose a methodology for efficiently estimating the likelihood that a LTL property P holds of a stochastic model of a biochemical network. As with other statistical verification techniques, the methodology we propose uses a stochastic simulation algorithm for generating execution samples, however there are three key aspects that improve the efficiency: first, the sample generation is driven by on-the-fly verification of P which results in optimal overall simulation time. Second, the confidence interval estimation for the probability of P to hold is based on an efficient variant of the Wilson method which ensures a faster convergence. Third, the whole methodology is designed according to a parallel fashion and a prototype software tool has been implemented that performs the sampling/verification process in parallel over an HPC architecture.

  8. Small Ruminant Production System Efficiency under Abu-Dhabi, United Arab Emirates Arid Land Conditions

    Directory of Open Access Journals (Sweden)

    Eihab Fathelrahman

    2014-12-01

    Full Text Available Sheep and goat production systems in the United Arab Emirates (UAE operate under scarce natural resource constraints. A cross-sectional survey that covered 661 mixed farms, including major sheep and goat production, was conducted in the three regions of Abu Dhabi Emirate (Al-Ain, Western Region and Abu Dhabi city during 2012. A Cobb-Douglas, double-logarithmic stochastic frontier production function and maximum likelihood estimation were applied to estimate important economic derivatives and the associated risk of small ruminant production in this arid area. The highest impact of an input on the output level was found to be labor for raising sheep and alfalfa grass for raising goats. Both labor and alfalfa variables were found to be overutilized for sheep and goat production, respectively. Overall, the results indicate that average technical efficiency is 0.62 for raising sheep and only 0.34 for raising goats in the study area. Technical efficiency analysis included measuring the frequency of farms at each level of estimated technical efficiency in the range between zero and one. Zero for the technical efficiency coefficient indicates a lack of technical efficiency in resource use. The results of this study indicated that only 1% of the sheep farms show a technical efficiency coefficient of 0.25 or less; the same can be said for 41% of goat producers. However, these technical efficiencies were found to be more than 0.75 for 12% and 5% of the sheep and goat farms, respectively. Overall, goat farming in the UAE was found to be less efficient than sheep production. The results also indicated that flock size and type of breed were the most influential factors relative to other factors, and both show a positive relationship with technical efficiency. Other than flock size, factors, such as owners’ years of experience and management practices, were found to be more influential on goat farming system efficiency relative to sheep farming.

  9. Light quality and efficiency of consumer grade solid state lighting products

    Science.gov (United States)

    Dam-Hansen, Carsten; Corell, Dennis Dan; Thorseth, Anders; Poulsen, Peter Behrensdorff

    2013-03-01

    The rapid development in flux and efficiency of Light Emitting Diodes (LED) has resulted in a flooding of the lighting market with Solid State Lighting (SSL) products. Many traditional light sources can advantageously be replaced by SSL products. There are, however, large variations in the quality of these products, and some are not better than the ones they are supposed to replace. A lack of quality demands and standards makes it difficult for consumers to get an overview of the SSL products. Here the results of a two year study investigating SSL products on the Danish market are presented. Focus has been on SSL products for replacement of incandescent lamps and halogen spotlights. The warm white light and good color rendering properties of these traditional light sources are a must for lighting in Denmark and the Nordic countries. 266 SSL replacement lamps have been tested for efficiency and light quality with respect to correlated color temperature and color rendering properties. This shows a trade-off between high color rendering warm white light and energy efficiency. The lumen and color maintenance over time has been investigated and results for products running over 11000 h will be presented. A new internet based SSL product selection tool will be shown. Here the products can be compared on efficiency, light quality parameters, thus providing a better basis for the selection of SSL products for consumers.

  10. Crop modelling and water use efficiency of protected cucumber

    International Nuclear Information System (INIS)

    El Moujabber, M.; Atallah, Th.; Darwish, T.

    2002-01-01

    Crop modelling is considered an essential tool of planning. The automation of irrigation scheduling using crop models would contribute to an optimisation of water and fertiliser use of protected crops. To achieve this purpose, two experiments were carried. The first one aimed at determining water requirements and irrigation scheduling using climatic data. The second experiment was to establish the influence of irrigation interval and fertigation regime on water use efficiency. The results gave a simple model for the determination of the water requirements of protected cucumber by the use of climatic data: ETc=K* Ep. K and Ep are calculated using climatic data outside the greenhouse. As for water use efficiency, the second experiment highlighted the fact that a high frequency and continuous feeding are highly recommended for maximising yield. (author)

  11. Measuring efficiency and productivity change (PTF) in the Peruvian electricity distribution companies after reforms

    Energy Technology Data Exchange (ETDEWEB)

    Perez-Reyes, Raul [Organismo Supervisor de la Inversion en Energia y Mineria, Osinergmin (Peru); Tovar, Beatriz [Infrastructure and Transport Research Group (EIT), Department of Applied Economics, University of Palmas de Gran Canaria (Spain)

    2009-06-15

    This paper analyzes the evolution of productivity of the electricity distribution companies in Peru, to assess whether reforms have improved the efficiency in this sector. The paper also identifies potential sources of productivity changes, based on market restructuring the electricity sector and changes in property. To do this, we rely on a set of data for 14 distribution companies, for the period 1996-2006. Our analysis suggests that improvements in the efficiency and productivity of electricity distribution in Peru have occurred, and that there is a relationship between the restructuring of distribution sector and the enhancement of productivity. (author)

  12. White Paper on Energy Efficiency Status of Energy-Using Products in China (2011)

    Energy Technology Data Exchange (ETDEWEB)

    Zhou, Nan [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Romankiewicz, John [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Fridley, David [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2012-06-01

    This White Paper focuses on the areas and products involved in the above tasks, based on the White Paper - Energy Efficiency Status of Energy-Using Products in China (2010), here referred to as “White Paper 2010”, which analyzed the energy efficiency status of 21 typical energy-using products in five sectors: household appliances, office equipment, commercial equipment, industrial equipment, and lighting equipment. Table 1 illustrates the detailed product coverage for this year’s paper, noting the addition of three household appliance items (automatic electric rice cooker, AC electric fan, and household induction cooktop) and one industrial sector item (three-phase distribution transformer).

  13. Measuring efficiency and productivity change (PTF) in the Peruvian electricity distribution companies after reforms

    International Nuclear Information System (INIS)

    Perez-Reyes, Raul; Tovar, Beatriz

    2009-01-01

    This paper analyzes the evolution of productivity of the electricity distribution companies in Peru, to assess whether reforms have improved the efficiency in this sector. The paper also identifies potential sources of productivity changes, based on market restructuring the electricity sector and changes in property. To do this, we rely on a set of data for 14 distribution companies, for the period 1996-2006. Our analysis suggests that improvements in the efficiency and productivity of electricity distribution in Peru have occurred, and that there is a relationship between the restructuring of distribution sector and the enhancement of productivity. (author)

  14. Assessing the Transferability of Transpiration-use Efficiency Models of Biomass Production Comprobando la Transferibilidad de Modelos para la Producción de Biomasa basados en la Eficiencia del uso de la Transpiración

    Directory of Open Access Journals (Sweden)

    Cristián Kremer

    2012-03-01

    Full Text Available Transpiration-use efficiency (w, defined as the ratio of biomass produced per unit water transpired, has been used to evaluate crop performance under limited water supply. However, the lack of consistency of w values through different environmental conditions has not allowed, using it as a transferable parameter. Thus, simple approaches have been developed, including: 1 w = kDa Da¹ and; 2 w = kEto ETo-¹ where kDa and kETo are crop-dependent parameters, with the underlying concept that normalization by Da or ET0 would accounts for the effects of climate variations on w, while these parameters would be reasonably constant across diverse environments. The objective of this study was to assess the transferability of kDa and kET^0 for wheat (Triticum aestivum L. and maize (Zea mays L.. The scarcity of experimental information and discrepancy of the methodology used, justified the use of a canopy transpiration and photosynthesis model which was developed, tested, and fitted with weather data from eight environmentally different locations to simulate values of w, kDa and kETOo. The results indicated that kDa and kET0 were more variable than expected; suggesting that calibration would be desirable. A consistent trend of change of the parameter values as function of Da or ET0 was found, which can be represented by mathematical functions, allowing transferring w, kDa and kET0 (maize. In contrast, the kETOo for wheat correlated weakly with Da and ET0, but a low overall coefficient of variation (10% allowed using an average value as a reasonable predictor of w.Eficiencia del uso de la transpiración (w, definida como la relación entre biomasa producida por unidad de agua transpirada, se ha utilizado para evaluar productividad bajo condiciones limitadas de agua. Sin embargo, la falta de consistencia de valores w bajo condiciones climáticas distintas no ha permitido su uso como parámetro transferible. Consecuentemente, aproximaciones simples han sido

  15. [Carbon efficiency of double-rice production system in Hunan Province, China].

    Science.gov (United States)

    Chen, Zhong-du; Wu, Yao; Ti, Jin-song; Chen, Fu; Li, Yong

    2015-01-01

    Improving the carbon efficiency of crop production systems is one of the important ways to realize low-carbon agriculture. A life cycle assessment approach and input-output calculation method was applied for a double-rice production system in the Hunan Province. Based on statistical data of crop yield and investment in the production system in the period from 2004 to 2012, carbon emission, carbon absorption, carbon efficiency and their dynamic changes of the double rice production systems were estimated. The results showed that the average of annual carbon emission from 2004 to 2012 was 656.4 x 10(7) kg CE. Carbon emissions from production and transport of fertilizer and pesticide accounted for a majority of agricultural input carbon emissions, approximately 70.0% and 15.9%, respectively. The carbon emission showed a decreasing trend from 2004 to 2012 in the Hunan Province, with an annual reduction rate of 2.4%, but the carbon emission intensity was in a trend of increase. The average of annual carbon absorption was 1547.0 x 10(7) kg C. The annual carbon absorption also showed a decreasing trend from 2004 to 2012 in Hunan Province, with an average annual reduction rate of 1.2%, and the carbon absorption intensity showed a trend of increase. Furthermore, production efficiency of carbon showed a slow upward trend. The economic efficiency of carbon showed a larger increasing rate with time, with an average annual growth rate of 9.9%. Ecological efficiency of carbon was stable and low, maintained at about 2.4 kg C . kg-1 CE. It indicated that the integrated carbon efficiency of Hunan double rice crop production system improved slowly with time and the key to improve the carbon efficiency of double rice production systems lies in reducing the rates of nitrogen fertilizer and pesticide, and improving their use efficiencies.

  16. An efficient energy response model for liquid scintillator detectors

    Science.gov (United States)

    Lebanowski, Logan; Wan, Linyan; Ji, Xiangpan; Wang, Zhe; Chen, Shaomin

    2018-05-01

    Liquid scintillator detectors are playing an increasingly important role in low-energy neutrino experiments. In this article, we describe a generic energy response model of liquid scintillator detectors that provides energy estimations of sub-percent accuracy. This model fits a minimal set of physically-motivated parameters that capture the essential characteristics of scintillator response and that can naturally account for changes in scintillator over time, helping to avoid associated biases or systematic uncertainties. The model employs a one-step calculation and look-up tables, yielding an immediate estimation of energy and an efficient framework for quantifying systematic uncertainties and correlations.

  17. Building Information Model: advantages, tools and adoption efficiency

    Science.gov (United States)

    Abakumov, R. G.; Naumov, A. E.

    2018-03-01

    The paper expands definition and essence of Building Information Modeling. It describes content and effects from application of Information Modeling at different stages of a real property item. Analysis of long-term and short-term advantages is given. The authors included an analytical review of Revit software package in comparison with Autodesk with respect to: features, advantages and disadvantages, cost and pay cutoff. A prognostic calculation is given for efficiency of adoption of the Building Information Modeling technology, with examples of its successful adoption in Russia and worldwide.

  18. PhD Thesis Summary: Energy Efficient Multistage Zeolite Drying for Heat-Sensitive Products

    NARCIS (Netherlands)

    Djaeni, M.; Boxtel, van A.J.B.

    2009-01-01

    Although drying takes a significant part of the total energy usage in industry, currently available drying technology is often not efficient in terms of energy consumption. Generally, the energy efficiency for drying processes ranges between 20 and 60% depending on the dryer type and product to be

  19. Organisational determinants of production and efficiency in general practice: a population-based study

    DEFF Research Database (Denmark)

    Rose Olsen, Kim; Gyrd-Hansen, Dorte; Sørensen, Torben Højmark

    2013-01-01

    Shortage of general practitioners (GPs) and an increased political focus on primary care have enforced the interest in efficiency analysis in the Danish primary care sector. This paper assesses the association between organisational factors of general practices and production and efficiency. We a...

  20. Optimal production scheduling for energy efficiency improvement in biofuel feedstock preprocessing considering work-in-process particle separation

    International Nuclear Information System (INIS)

    Li, Lin; Sun, Zeyi; Yao, Xufeng; Wang, Donghai

    2016-01-01

    Biofuel is considered a promising alternative to traditional liquid transportation fuels. The large-scale substitution of biofuel can greatly enhance global energy security and mitigate greenhouse gas emissions. One major concern of the broad adoption of biofuel is the intensive energy consumption in biofuel manufacturing. This paper focuses on the energy efficiency improvement of biofuel feedstock preprocessing, a major process of cellulosic biofuel manufacturing. An improved scheme of the feedstock preprocessing considering work-in-process particle separation is introduced to reduce energy waste and improve energy efficiency. A scheduling model based on the improved scheme is also developed to identify an optimal production schedule that can minimize the energy consumption of the feedstock preprocessing under production target constraint. A numerical case study is used to illustrate the effectiveness of the proposed method. The research outcome is expected to improve the energy efficiency and enhance the environmental sustainability of biomass feedstock preprocessing. - Highlights: • A novel method to schedule production in biofuel feedstock preprocessing process. • Systems modeling approach is used. • Capable of optimize preprocessing to reduce energy waste and improve energy efficiency. • A numerical case is used to illustrate the effectiveness of the method. • Energy consumption per unit production can be significantly reduced.

  1. AN EFFICIENT PATIENT INFLOW PREDICTION MODEL FOR HOSPITAL RESOURCE MANAGEMENT

    Directory of Open Access Journals (Sweden)

    Kottalanka Srikanth

    2017-07-01

    Full Text Available There has been increasing demand in improving service provisioning in hospital resources management. Hospital industries work with strict budget constraint at the same time assures quality care. To achieve quality care with budget constraint an efficient prediction model is required. Recently there has been various time series based prediction model has been proposed to manage hospital resources such ambulance monitoring, emergency care and so on. These models are not efficient as they do not consider the nature of scenario such climate condition etc. To address this artificial intelligence is adopted. The issues with existing prediction are that the training suffers from local optima error. This induces overhead and affects the accuracy in prediction. To overcome the local minima error, this work presents a patient inflow prediction model by adopting resilient backpropagation neural network. Experiment are conducted to evaluate the performance of proposed model inter of RMSE and MAPE. The outcome shows the proposed model reduces RMSE and MAPE over existing back propagation based artificial neural network. The overall outcomes show the proposed prediction model improves the accuracy of prediction which aid in improving the quality of health care management.

  2. THE EFFECT OF EXTERNAL TRANSPORT ON ENERGETIC EFFICIENCY OF BIODIESEL PRODUCTION

    Directory of Open Access Journals (Sweden)

    Olga Anna Orynycz

    2017-03-01

    Full Text Available In several our publications energetic efficiency of biofuel production was defined as a ratio of the amount of energy obtained in a form of biofuel to the sum of energy contributions necessary to conduct production processes on all the production stages. It was also shown that such a definition enables subsequent inclusion of production steps due to additivity of reciprocals of energetic efficiency determined separately for each step. In the present work, several scenarios of the transport of biomass between plantation and industrial facility converting biomass into biofuel are considered, appropriate values of energetic efficiency are computed and compared. The analysis is confined to biodiesel production based on rapeseed. The results show substantial differences caused by various approaches to that stage of transport.

  3. Study of the phage production efficiency in the bacteria lysis processes

    International Nuclear Information System (INIS)

    Vidania Munoz, R. de; Garces, F.; Davila, C. A.

    1979-01-01

    In this work we present a search for the best production conditions of λvir andλ clear phages In E coli K12 and E coli C 6 00 infected cells respectively. By keeping fixed some parameters of the process as the bacterial and phage generation times and (he bacterial burst side, we have finder that the lysis yield is strongly dependent on the multiplicity and in a lesser degree on the infection time. It appears from the experimental results that other variables are important, as infection efficiency and approach time from phages to bacteria. We will try to describe the lysis phenomenon by a numerical model on the bases of the se experimental results. (Author) 11 refs

  4. An Efficient Dynamic Trust Evaluation Model for Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Zhengwang Ye

    2017-01-01

    Full Text Available Trust evaluation is an effective method to detect malicious nodes and ensure security in wireless sensor networks (WSNs. In this paper, an efficient dynamic trust evaluation model (DTEM for WSNs is proposed, which implements accurate, efficient, and dynamic trust evaluation by dynamically adjusting the weights of direct trust and indirect trust and the parameters of the update mechanism. To achieve accurate trust evaluation, the direct trust is calculated considering multitrust including communication trust, data trust, and energy trust with the punishment factor and regulating function. The indirect trust is evaluated conditionally by the trusted recommendations from a third party. Moreover, the integrated trust is measured by assigning dynamic weights for direct trust and indirect trust and combining them. Finally, we propose an update mechanism by a sliding window based on induced ordered weighted averaging operator to enhance flexibility. We can dynamically adapt the parameters and the interactive history windows number according to the actual needs of the network to realize dynamic update of direct trust value. Simulation results indicate that the proposed dynamic trust model is an efficient dynamic and attack-resistant trust evaluation model. Compared with existing approaches, the proposed dynamic trust model performs better in defending multiple malicious attacks.

  5. Increased Statistical Efficiency in a Lognormal Mean Model

    Directory of Open Access Journals (Sweden)

    Grant H. Skrepnek

    2014-01-01

    Full Text Available Within the context of clinical and other scientific research, a substantial need exists for an accurate determination of the point estimate in a lognormal mean model, given that highly skewed data are often present. As such, logarithmic transformations are often advocated to achieve the assumptions of parametric statistical inference. Despite this, existing approaches that utilize only a sample’s mean and variance may not necessarily yield the most efficient estimator. The current investigation developed and tested an improved efficient point estimator for a lognormal mean by capturing more complete information via the sample’s coefficient of variation. Results of an empirical simulation study across varying sample sizes and population standard deviations indicated relative improvements in efficiency of up to 129.47 percent compared to the usual maximum likelihood estimator and up to 21.33 absolute percentage points above the efficient estimator presented by Shen and colleagues (2006. The relative efficiency of the proposed estimator increased particularly as a function of decreasing sample size and increasing population standard deviation.

  6. Microwave Enhanced Direct Cracking of Hydrocarbon Feedstock for Energy Efficient Production of Ethylene and Propylene

    International Nuclear Information System (INIS)

    Shulman, Holly; Fall, Morgana; Wagner, Eric; Bowlin, Ricardo

    2012-01-01

    This project demonstrated microwave cracking of ethane with good product conversion and ethylene selectivity, with a short residence time (∼0.001 sec). The laboratory scale equipment was designed and built, along with concept designs for larger scale implementation. The system was operated below atmospheric pressures, in the range of 15-55 torr, with argon as a carrier gas. The measured products included hydrogen, methane, acetylene, and ethylene. The results followed similar trends to those predicted by the modeling software SPYRO(reg s ign), with the exception that the microwave appeared to produce slightly lower amounts of ethylene and methane, although enhanced analytical analysis should reduce the difference. Continued testing will be required to verify these results and quantify the energy consumption of microwave vs. conventional. The microwave cracking process is an attractive option due to the possibility of selectively heating the reaction volume rather than the reactor walls, which may allow novel reactor designs that result in more efficient production of ethylene. Supplemental studies are needed to continue the laboratory testing and refine processing parameters.

  7. Microwave Enhanced Direct Cracking of Hydrocarbon Feedstock for Energy Efficient Production of Ethylene and Propylene.

    Energy Technology Data Exchange (ETDEWEB)

    Shulman, Holly; Fall, Morgana; Wagner, Eric; Bowlin, Ricardo

    2012-02-13

    This project demonstrated microwave cracking of ethane with good product conversion and ethylene selectivity, with a short residence time ({approx}0.001 sec). The laboratory scale equipment was designed and built, along with concept designs for larger scale implementation. The system was operated below atmospheric pressures, in the range of 15-55 torr, with argon as a carrier gas. The measured products included hydrogen, methane, acetylene, and ethylene. The results followed similar trends to those predicted by the modeling software SPYRO{reg_sign}, with the exception that the microwave appeared to produce slightly lower amounts of ethylene and methane, although enhanced analytical analysis should reduce the difference. Continued testing will be required to verify these results and quantify the energy consumption of microwave vs. conventional. The microwave cracking process is an attractive option due to the possibility of selectively heating the reaction volume rather than the reactor walls, which may allow novel reactor designs that result in more efficient production of ethylene. Supplemental studies are needed to continue the laboratory testing and refine processing parameters.

  8. IMPROVING THE EFFECTIVENESS AND EFFICIENCY OF EVIDENCE PRODUCTION FOR HEALTH TECHNOLOGY ASSESSMENT.

    Science.gov (United States)

    Facey, Karen; Henshall, Chris; Sampietro-Colom, Laura; Thomas, Sarah

    2015-01-01

    Health Technology Assessment (HTA) needs to address the challenges posed by high cost, effective technologies, expedited regulatory approaches, and the opportunities provided by collaborative real-world evaluation of technologies. The Health Technology Assessment International (HTAi) Policy Forum met to consider these issues and the implications for evidence production to inform HTA. This paper shares their discussion to stimulate further debate. A background paper, presentations, group discussions, and stakeholder role play at the 2015 HTAi Policy Forum meeting informed this paper. HTA has an important role to play in helping improve evidence production and ensuring that the health service is ready to adopt effective technologies. It needs to move from simply informing health system decisions to also working actively to align stakeholder expectations about realistic evidence requirements. Processes to support dialogue over the health technology life cycle need to be developed that are mindful of limited resources, operate across jurisdictions and learn from past processes. Collaborations between health technology developers and health systems in different countries should be encouraged to develop evidence that will inform decision making. New analytical techniques emerging for real-world data should be harnessed to support modeling for HTA. A paradigm shift (to "Health Innovation System 2.0") is suggested where HTA adopts a more central, proactive role to support alignment within and amongst stakeholders over the whole life cycle of the technology. This could help ensure that evidence production is better aligned with patient and health system needs and so is more effective and efficient.

  9. Performance of Linear and Nonlinear Two-Leaf Light Use Efficiency Models at Different Temporal Scales

    DEFF Research Database (Denmark)

    Wu, Xiaocui; Ju, Weimin; Zhou, Yanlian

    2015-01-01

    The reliable simulation of gross primary productivity (GPP) at various spatial and temporal scales is of significance to quantifying the net exchange of carbon between terrestrial ecosystems and the atmosphere. This study aimed to verify the ability of a nonlinear two-leaf model (TL-LUEn), a linear...... two-leaf model (TL-LUE), and a big-leaf light use efficiency model (MOD17) to simulate GPP at half-hourly, daily and 8-day scales using GPP derived from 58 eddy-covariance flux sites in Asia, Europe and North America as benchmarks. Model evaluation showed that the overall performance of TL...

  10. FIRE BEHAVIOR PREDICTING MODELS EFFICIENCY IN BRAZILIAN COMMERCIAL EUCALYPT PLANTATIONS

    Directory of Open Access Journals (Sweden)

    Benjamin Leonardo Alves White

    2016-12-01

    Full Text Available Knowing how a wildfire will behave is extremely important in order to assist in fire suppression and prevention operations. Since the 1940’s mathematical models to estimate how the fire will behave have been developed worldwide, however, none of them, until now, had their efficiency tested in Brazilian commercial eucalypt plantations nor in other vegetation types in the country. This study aims to verify the accuracy of the Rothermel (1972 fire spread model, the Byram (1959 flame length model, and the fire spread and length equations derived from the McArthur (1962 control burn meters. To meet these objectives, 105 experimental laboratory fires were done and their results compared with the predicted values from the models tested. The Rothermel and Byram models predicted better than McArthur’s, nevertheless, all of them underestimated the fire behavior aspects evaluated and were statistically different from the experimental data.

  11. Efficient Neural Network Modeling for Flight and Space Dynamics Simulation

    Directory of Open Access Journals (Sweden)

    Ayman Hamdy Kassem

    2011-01-01

    Full Text Available This paper represents an efficient technique for neural network modeling of flight and space dynamics simulation. The technique will free the neural network designer from guessing the size and structure for the required neural network model and will help to minimize the number of neurons. For linear flight/space dynamics systems, the technique can find the network weights and biases directly by solving a system of linear equations without the need for training. Nonlinear flight dynamic systems can be easily modeled by training its linearized models keeping the same network structure. The training is fast, as it uses the linear system knowledge to speed up the training process. The technique is tested on different flight/space dynamic models and showed promising results.

  12. A physiological production model for cacao : results of model simulations

    NARCIS (Netherlands)

    Zuidema, P.A.; Leffelaar, P.A.

    2002-01-01

    CASE2 is a physiological model for cocoa (Theobroma cacao L.) growth and yield. This report introduces the CAcao Simulation Engine for water-limited production in a non-technical way and presents simulation results obtained with the model.

  13. Radially dependent photopeak efficiency model for Si(Li) detectors

    Energy Technology Data Exchange (ETDEWEB)

    Cohen, D D [Australian Inst. of Nuclear Science and Engineering, Lucas Heights

    1980-12-15

    A simple five parameter model for the efficiency of a Si(Li) detector has been developed. It was found necessary to include a radially dependent efficiency even for small detectors. The model is an extension of the pioneering work of Hansen et al. but correction factors include more up to date data and explicit equations for the mass attenuation coefficients over a wide range of photons energies. Four of the five parameters needed are generally supplied by most commercial manufacturers of Si(Li) detectors. /sup 54/Mn and /sup 241/Am sources have been used to calibrate a Si(Li) to approx. +-3% over the energy range 3-60 keV.

  14. [Experimental evaluation of the spraying disinfection efficiency on dental models].

    Science.gov (United States)

    Zhang, Yi; Fu, Yuan-fei; Xu, Kan

    2013-08-01

    To evaluate the disinfect effect after spraying a new kind of disinfectant on the dental plaster models. The germ-free plaster samples, which were smeared with bacteria compound including Staphylococcus aureus, Escherichia coli, Saccharomyces albicans, Streptococcus mutans and Actinomyces viscosus were sprayed with disinfectants (CaviCide) and glutaraldehyde individually. In one group(5 minutes later) and another group(15 minutes later), the colonies were counted for statistical analysis after sampling, inoculating, and culturing which were used for evaluation of disinfecting efficiency. ANOVA was performed using SPSS12.0 software package. All sample bacteria were eradicated after spraying disinfectants(CaviCide) within 5 minutes and effective bacteria control was retained after 15 minutes. There was significant difference between the disinfecting efficiency of CaviCide and glutaraldehyde. The effect of disinfection with spraying disinfectants (CaviCide) on dental models is quick and effective.

  15. Measuring efficiency of cotton cultivation in Pakistan: a restricted production frontier study.

    Science.gov (United States)

    Watto, Muhammad Arif; Mugera, Amin

    2014-11-01

    Massive groundwater pumping for irrigation has started lowering water tables rapidly in different regions of Pakistan. Declining water tables have thus prompted research efforts to improve agricultural productivity and efficiency to make efficient use of scarce water resources. This study employs a restricted stochastic production frontier to estimate the level of, and factors affecting, technical efficiency of groundwater-irrigated cotton farms in the Punjab province of Pakistan. The mean technical efficiency estimates indicate substantial technical inefficiencies among cotton growers. On average, tube-well owners and water buyers can potentially increase cotton production by 19% and 28%, respectively, without increasing the existing input level. The most influential factors affecting technical efficiency positively are the use of improved quality seed, consultation with extension field staff and farmers' perceptions concerning the availability of groundwater resources for irrigation in the future. This study proposes that adopting improved seed for new cotton varieties and providing better extension services regarding cotton production technology would help to achieve higher efficiency in cotton farming. Within the context of falling water tables, educating farmers about the actual crop water requirements and guiding them about groundwater resource availability may also help to achieve higher efficiencies. © 2014 Society of Chemical Industry. © 2014 Society of Chemical Industry.

  16. Efficient image duplicated region detection model using sequential block clustering

    Czech Academy of Sciences Publication Activity Database

    Sekeh, M. A.; Maarof, M. A.; Rohani, M. F.; Mahdian, Babak

    2013-01-01

    Roč. 10, č. 1 (2013), s. 73-84 ISSN 1742-2876 Institutional support: RVO:67985556 Keywords : Image forensic * Copy–paste forgery * Local block matching Subject RIV: IN - Informatics, Computer Science Impact factor: 0.986, year: 2013 http://library.utia.cas.cz/separaty/2013/ZOI/mahdian-efficient image duplicated region detection model using sequential block clustering.pdf

  17. Biological production models as elements of coupled, atmosphere-ocean models for climate research

    Science.gov (United States)

    Platt, Trevor; Sathyendranath, Shubha

    1991-01-01

    Process models of phytoplankton production are discussed with respect to their suitability for incorporation into global-scale numerical ocean circulation models. Exact solutions are given for integrals over the mixed layer and the day of analytic, wavelength-independent models of primary production. Within this class of model, the bias incurred by using a triangular approximation (rather than a sinusoidal one) to the variation of surface irradiance through the day is computed. Efficient computation algorithms are given for the nonspectral models. More exact calculations require a spectrally sensitive treatment. Such models exist but must be integrated numerically over depth and time. For these integrations, resolution in wavelength, depth, and time are considered and recommendations made for efficient computation. The extrapolation of the one-(spatial)-dimension treatment to large horizontal scale is discussed.

  18. Combining microbial cultures for efficient production of electricity from butyrate in a microbial electrochemical cell

    Science.gov (United States)

    Miceli, Joseph F.; Garcia-Peña, Ines; Parameswaran, Prathap; Torres, César I.; Krajmalnik-Brown, Rosa

    2014-01-01

    Butyrate is an important product of anaerobic fermentation; however, it is not directly used by characterized strains of the highly efficient anode respiring bacteria (ARB) Geobacter sulfurreducens in microbial electrochemical cells. By combining a butyrate-oxidizing community with a Geobacter rich culture, we generated a microbial community which outperformed many naturally derived communities found in the literature for current production from butyrate and rivaled the highest performing natural cultures in terms of current density (~11 A/m2) and Coulombic efficiency (~70%). Microbial community analyses support the shift in the microbial community from one lacking efficient ARB in the marine hydrothermal vent community to a community consisting of ~80% Geobacter in the anode biofilm. This demonstrates the successful production and adaptation of a novel microbial culture for generating electrical current from butyrate with high current density and high Coulombic efficiency, by combining two mixed micro bial cultures containing complementing biochemical pathways. PMID:25048958

  19. Development of a novel energy-efficient adsorption dryer with zeolite for food product

    NARCIS (Netherlands)

    Djaeni, M.; Boxtel, van A.J.B.

    2012-01-01

    Abstract: The demand of high quality dry products closing to the fresh condition increases significantly. Current drying technology have shown the significant improvement on product quality, but the breakthrough respecting to energy efficiency is scarce. Air dehumidification with adsorbent such as

  20. Gender discrimination and its impact on income, productivity, and technical efficiency: evidence from Benin

    NARCIS (Netherlands)

    Kinkingninhoun-Mêdagbé, F.M.; Diagne, A.; Simtowe, F.; Agboh-Noameshie, A.R.; Adegbola, P.

    2010-01-01

    This paper examines the occurrence and impact of gender discrimination in access to production resources on the income, productivity, and technical efficiency of farmers. Through an empirical investigation of farmers from Koussin-Le´le´, a semi-collective irrigated rice scheme in central Benin, we