Introducción al depósito legal como herramienta para el patrimonio documental

Directory of Open Access Journals (Sweden)

Jhonny Antonio Pabón Cadavid

2013-11-01

Full Text Available El artículo es una introducción a los elementos básicos del depósito legal y la actual legislación sobre el tema en Colombia. El depósito legal se entiende como la obligación que tiene toda persona natural o jurídica que publique documentos de entregar a una institución nacional ejemplares con la finalidad de preservar el patrimonio documental. Se enmarca el depósito legal como una figura jurídica que es parte esencial de las políticas culturales del país. Se presenta la definición básica y un breve bosquejo cronológico de su desarrollo, con especial énfasis en su evolución en Colombia desde 1834. Se señala cómo el depósito legal se ha ido modificando de acuerdo a la evolución en las tecnologías de la información y a la evolución de sus funciones. Se analizan los diferentes elementos normativos que hacen parte del depósito legal, los objetivos de dicha legislación y sus cambios funcionales de acuerdo a diversos factores, así como la situación actual de la legislación de depósito legal en Colombia. Se concluye que en Colombia la legislación de depósito legal se encuentra dispersa, carece de unos objetivos claros, y su actual regulación es de mediados de los años noventa, lo cual requiere una actualización legislativa que dé cuenta de los avances tecnológicos, como en el caso de las publicaciones en internet.

1 meter Digital Elevation Models (DEMs) - USGS National Map 3DEP Downloadable Data Collection

Data.gov (United States)

U.S. Geological Survey, Department of the Interior — This is a tiled collection of the 3D Elevation Program (3DEP) and is one meter resolution.The 3DEP data holdings serve as the elevation layer of The National Map,...

Testing the genotoxicity of some perfumes with high diethylphthalate (DEP levels using comet assay

Directory of Open Access Journals (Sweden)

Iman Al-Saleh

2015-05-01

Full Text Available The presence of phthalates in perfumes has gained recently some attention since these chemicals are added sometimes intentionally as a fixative. Our previous study tested 47 branded perfumes sold in Saudi market and found 68% of tested samples had diethylphthalate (DEP, above reported threshold limit of 1 ppm. Of these phthalates, DEP was found to have the highest mean value (1621.63 ppm. These results enticed us to test the potential genotoxicity of 7 brands in which their DEP contents were in the range of 1.06 ppm to 23649.3 ppm in human TK-6 cells using single cell gel electrophoresis assay (comet assay. Cells were exposed to 400 µl perfume for 2 hrs, at room temperature. Tail moment was (TM used as a metric measure for DNA damage and 25 cells per sample were determined by image analysis software. Four perfumes with DEP above 40 ppm produced significant DNA damage in TK-6 cells with TM of 54.27 ± 1.04, n=500 compare to the other 3 perfumes with DEP < 2 ppm (21.94 ± 1.09, n=300, untreated cells (2.99 ± 0.17, n=250 and cells induced with ethanol (33.76 ± 1.4, n=75 or methanol (23.82 ± 1.84, n=100 which are the vehicles used in perfume's preparations. The results suggest that DEP in perfumes might be one of the ingredients that provoked DNA damage; however, further investigation is required confirming our observation.

O depósito subungueal como disseminador e enteroparasitos

Directory of Open Access Journals (Sweden)

Carlos Alberto Moreira Campos

1974-04-01

Full Text Available Demonstramos, no depósito subungueal de 130 crianças residentes no bairro de Nova Descoberta, Natal - RN, a presença de ovos ou cistos de enteroparasitos, tais como: Ascaris lumbricoides, Trichocephalus trichiurus, Enterobius vermicularis, Ancylostomidae, Entamoeba coli, Entamoeba histolytica e Giardia lamblia. Ao lado da demonstração dos referidos parasitos, fizemos a correlação entre a incidência parasitária e as espécies encontradas no resíduo que se forma sob as unhas. Dos enteroparasitos encontrados, parece ser esta a primeira referência a ovos de ancilostomídeos no depósito subungueal. Dos 130 exames realizados 16 mostraram-se positivos, com uma percentagem de 12,30%.

Fe(III)-solar light induced degradation of diethyl phthalate (DEP) in aqueous solutions.

Science.gov (United States)

Mailhot, G; Sarakha, M; Lavedrine, B; Cáceres, J; Malato, S

2002-11-01

The degradation of diethyl phthalate (DEP) photoinduced by Fe(III) in aqueous solutions has been investigated under solar irradiation in the compound parabolic collector reactor at Plataforma Solar de Almeria. Hydroxyl radicals *OH, responsible of the degradation, are formed via an intramolecular photoredox process in the excited state of Fe(III) aquacomplexes. The primary step of the reaction is mainly due to the attack of *OH radicals on the aromatic ring. For prolonged irradiations DEP and its photoproducts are completely mineralized due to the regeneration of the absorbing species and the continuous formation of *OH radicals that confers a catalytic aspect to the process. Consequently, the degradation photoinduced by Fe(III) could be an efficient method of DEP removal from water.

Simulation and Experimental Study on Thermal Conductivity of [EMIM][DEP] + H_2 O + SWCNTs Nanofluids as a New Working Pairs

Science.gov (United States)

Li, Chang; Zhao, Zongchang; Zhang, Xiaodong; Li, Tianyu

2018-03-01

In this paper, the single-wall carbon nanotubes (SWCNTs) were dispersed into ionic liquid, 1-ethyl-3-methylimidazolium diethylphosphate ([EMIM][DEP]), and its aqueous solution [EMIM][DEP](1) + H2O(2) to enhance the thermal conductivity of base liquids, which will be the promising working pairs for absorption heat pumps and refrigerators. The enhancement effects on thermal conductivity were studied by experiment and molecular dynamic simulation (MD) methods. The thermal conductivities of [EMIM][DEP] + SWCNTs (INF) and [EMIM][DEP](1) + H2O(2) + SWCNT(SNF) both with SWCNT mass fraction of 0.5, 1, and 2 (wt%) were measured by transient hot-wire method. The results indicate that the enhancement ratio of thermal conductivity of INF, and SNF can approach 1.30 when SWCNT is 2 (wt%). Moreover, SWCNTs has a higher enhancement ratio than multi-wall carbon nanotubes (MWCNTs). Density and thermal conductivity of [EMIM][DEP], [EMIM][DEP](1) + H2O(2), INF and SNF systems, together with self-diffusion coefficients of [EMIM]+, [DEP]-, [EMIM][DEP] and water in solution [EMIM][DEP](1) + H2O(2), were investigated by MD simulations. The results indicate that the maximum relative error between the simulated and experimental densities is about 2 %, and the simulated self-diffusion coefficient of [EMIM][DEP] is in the order of magnitude of 10^{-11} m2\\cdot s^{-1}. The average relative deviation for the simulated thermal conductivity of [EMIM][DEP](1) + H2O(2), INF and SNF from experimental ones are 23.57 %, 5 %, and 5 %, respectively. In addition, the contributions of kinetic energy, potential energy, and virial and partial enthalpy terms to thermal conductivity were also calculated. The results indicate that virial term's contribution to thermal conductivity is the maximum, which accounts for 75 % to 80 % of total thermal conductivity.

Comportamiento dinámico de depósitos aluviales en Colombia

OpenAIRE

Guzmán, Adolfo; Nuñez, Jsús; Parra, Fernando

2006-01-01

En este artículo se presentan las principales características de dos arenas de origen aluvial (Tumaco y Cali) potencialmente licuables, que históricamente han sido sometidas a cargas dinámicas generadas por sismos. Los dos depósitos se encuentran ubicados en áreas de amenaza sísmica alta, por lo que las aceleraciones máximas esperadas en roca fluctúan entre 0.2g y 0.3g. La caracterización de los depósitos granulares se realizó mediante pruebas de campo, complementados con ensayos de laborator...

Enfermedad de depósito glomerular: a propósito de un caso de glomerulonefritis fibrilar

OpenAIRE

Jorge de Jesús Cantillo; Rocío del Pilar López; Rafael Enrique Andrade

2009-01-01

En el diagnóstico rutinario por biopsia renal encontramos enfermedades glomerulares que tienen depósitos estructurales fibrilares en la matriz extracelular del glomérulo, visibles por microscopía electrónica. La amiloidosis es la glomerulopatía más común con depósitos de estas características ultraestructurales. Sin embargo, hay otras glomerulopatías con depósitos similares, negativas con rojo Congo, pero positivas para inmunoglobulinas. La glomerulonefritis fibrilar es una entidad diagnós...

Development of an Android application to estimate the parameters of DEP from the radiographic exam

International Nuclear Information System (INIS)

Soares, Flavio Augusto P.; Soares, Carina Klein; Martins, Alex Sander C.; Filgueiras, Tatiana Pereira; Recalcatti, Victor; Heis, Adriano

2013-01-01

The objective of this research was to develop an application for the Android operating system to calculate the entrance dose in the skin - DEP for the professional radiological techniques can estimate the dose absorbed by the patient. The application was written with the help of the ECLIPSE development suite together with the Google SDK. The DEP-Calc was designed to be used in a mobile device, so the program consists of simple and self-explanatory screens, occupies a small space in the internal memory of the device and is easy to use.To obtain the value of the DEP of a radiographic examination, the practitioner provides the variables used in the examination as well as the device, and from this information, the program calculates the value of the DEP. With its use, as well as meet a legal requirement, allows an improvement in image quality and dose optimization, since the professional has knowledge of the radiation produced. (author)

METHODOLOGY OF THE HYBRID PROPULSION SYSTEM (DMP & DEP FOR TRIMARAN TYPE FAST PATROL BOAT

Directory of Open Access Journals (Sweden)

Aulia Widyandari

2012-04-01

Full Text Available There are lot of research done to develop a patrol boat, from the modification of hull model until propulsion system equipment. For example the model ship type AMV (Advanced Marine Vehicle was developed starting from the Catamaran, Trimaran and  Pentamaran model. Everything is aimed at obtaining the ship design that has the speed and stability. In addition to achieving high-speed vessel must be equipped with propulsion (Main Power is great, that means the main engine dimensions, auxiliary equipments and fuel tanks is too large. Many Limitations of space on the ship's engine room trimaran vessel is the main obstacle in designing propulsion system. Beside that Patrol boat should have many missions speed, so propulsion system should be designed at that conditions.   Hybrid propulsion is a combination of Diesel Mechanical Propulsion (DMP with Diesel Electric Propulsion (DEP. DMP system is connected directly to the propeller shaft (or through a reduction-gear. DMP has provide more efficiency rate of 95%. While DEP is only able to provide efficiency by 85% - 89% is slightly lower than DMP, but the DEP offers many advantages such as simplicity and suitability in the rotational speed settings, control systems, engine power production Redundancy, Flexibility in the design of equipments layout in engine rooms, noise, vibration and fuel consumption efficiency which affects the lower pollution.   Design of Hybrid Propulsion system can be satisfied and achieved the Power requirements and optimally at all speed condition of patrol boat. Therefore the author made using modeling Maxsurf-11.12 software and carried out various optimization of the choice of main engine, propeller and system conditions for fast patrol boat cruise. 

Depósitos corneales de ciprofloxacino Corneal deposits of ciprofloxacin

Directory of Open Access Journals (Sweden)

Taimi Cárdenas Díaz

2010-01-01

Full Text Available Las fluoroquinolonas son ampliamente utilizadas para el tratamiento de infecciones oculares bacterianas, ya que tienen actividad tanto para grampositivos, como para gramnegativos. Son fármacos seguros, pero se han descrito depósitos blancos cristalinianos en pacientes con administración frecuente y prolongada;en la mayoría de los casos, ellos resuelven de forma lenta al interrumpir el tratamiento. Si esto no ocurre, los depósitos se deben desbridar. Se ilustran 3 casos operados de catarata que llevaron tratamiento con ciprofloxacino en el posoperatorio, en los cuales se presentaron depósitos corneales y aunque disminuyó la agudeza visual, esta se recuperó después de la queratectomía.Fluoroquinolones are broadly used for the treatment of bacterial ocular infections, since they can act upon both grampositive and gramnegative bacteria. They are safe drugs, but white corneal deposits have been described in patients who frequently take this drug for a long period of time. In most of the cases, the deposits disappear slowly after the treatment is interrupted. If this does not happen, the deposits should be eliminated. Three cases operated on from cataract were presented, who had been taken ciprofloxacin in the postoperative stage and had corneal deposits. Although their visual acuity decreased, it recovered after keratectomy.

Numerical Model of Streaming DEP for Stem Cell Sorting

Directory of Open Access Journals (Sweden)

Rucha Natu

2016-11-01

Full Text Available Neural stem cells are of special interest due to their potential in neurogenesis to treat spinal cord injuries and other nervous disorders. Flow cytometry, a common technique used for cell sorting, is limited due to the lack of antigens and labels that are specific enough to stem cells of interest. Dielectrophoresis (DEP is a label-free separation technique that has been recently demonstrated for the enrichment of neural stem/progenitor cells. Here we use numerical simulation to investigate the use of streaming DEP for the continuous sorting of neural stem/progenitor cells. Streaming DEP refers to the focusing of cells into streams by equilibrating the dielectrophoresis and drag forces acting on them. The width of the stream should be maximized to increase throughput while the separation between streams must be widened to increase efficiency during retrieval. The aim is to understand how device geometry and experimental variables affect the throughput and efficiency of continuous sorting of SC27 stem cells, a neurogenic progenitor, from SC23 cells, an astrogenic progenitor. We define efficiency as the ratio between the number of SC27 cells over total number of cells retrieved in the streams, and throughput as the number of SC27 cells retrieved in the streams compared to their total number introduced to the device. The use of cylindrical electrodes as tall as the channel yields streams featuring >98% of SC27 cells and width up to 80 µm when using a flow rate of 10 µL/min and sample cell concentration up to 105 cells/mL.

1/3rd arc-second Digital Elevation Models (DEMs) - USGS National Map 3DEP Downloadable Data Collection

Data.gov (United States)

U.S. Geological Survey, Department of the Interior — This is a tiled collection of the 3D Elevation Program (3DEP) and is 1/3 arc-second (approximately 10 m) resolution.The 3DEP data holdings serve as the elevation...

1/9th Arc-second Digital Elevation Models (DEMs) - USGS National Map 3DEP Downloadable Data Collection

Data.gov (United States)

U.S. Geological Survey, Department of the Interior — This is a tiled collection of the 3D Elevation Program (3DEP) and is 1/9 arc-second (approximately 3 m) resolution.The 3DEP data holdings serve as the elevation...

Effects of High-Intensity Swimming on Lung Inflammation and Oxidative Stress in a Murine Model of DEP-Induced Injury.

Science.gov (United States)

Ávila, Leonardo C M; Bruggemann, Thayse R; Bobinski, Franciane; da Silva, Morgana Duarte; Oliveira, Regiane Carvalho; Martins, Daniel Fernandes; Mazzardo-Martins, Leidiane; Duarte, Marta Maria Medeiros Frescura; de Souza, Luiz Felipe; Dafre, Alcir; Vieira, Rodolfo de Paula; Santos, Adair Roberto Soares; Bonorino, Kelly Cattelan; Hizume Kunzler, Deborah de C

2015-01-01

Studies have reported that exposure to diesel exhaust particles (DEPs) induces lung inflammation and increases oxidative stress, and both effects are susceptible to changes via regular aerobic exercise in rehabilitation programs. However, the effects of exercise on lungs exposed to DEP after the cessation of exercise are not clear. Therefore, the aim of this study was to evaluate the effects of high-intensity swimming on lung inflammation and oxidative stress in mice exposed to DEP concomitantly and after exercise cessation. Male Swiss mice were divided into 4 groups: Control (n = 12), Swimming (30 min/day) (n = 8), DEP (3 mg/mL-10 μL/mouse) (n = 9) and DEP+Swimming (n = 8). The high-intensity swimming was characterized by an increase in blood lactate levels greater than 1 mmoL/L between 10th and 30th minutes of exercise. Twenty-four hours after the final exposure to DEP, the anesthetized mice were euthanized, and we counted the number of total and differential inflammatory cells in the bronchoalveolar fluid (BALF), measured the lung homogenate levels of IL-1β, TNF-α, IL-6, INF-ϫ, IL-10, and IL-1ra using ELISA, and measured the levels of glutathione, non-protein thiols (GSH-t and NPSH) and the antioxidant enzymes catalase and glutathione peroxidase (GPx) in the lung. Swimming sessions decreased the number of total cells (pswimming groups compared with the control groups, as did the CAT lung levels (p = 0.0001). Simultaneously, swimming resulted in an increase in the GSH-t and NPSH lung levels in the DEP group (p = 0.0001 and pswimming sessions decreased the lung inflammation and oxidative stress status during DEP-induced lung inflammation in mice.

Comments on INFCE/DEP./WG-4/100 by France

International Nuclear Information System (INIS)

1978-10-01

This document is a comment by the French delegation upon INFCE/DEP./WG-4/100. It expresses the French view that consideration of sub-national threats should be treated quite separately from questions of proliferation and that the methodology must also consider the possible proliferation strategies of governments relative to international commitments and safeguards systems

United Kingdom comments on INFCE/DEP./WG-4/72

International Nuclear Information System (INIS)

1978-11-01

This document presents comments prepared by the UK delegation upon INFCE/DEP./WG-4/72. It details differences in approach to the ALARA concept between the US and the UK and comments on the figures presented for occupational and general public radiation exposure in the context of the THORP plant to be constructed at Windscale, UK

Depósito fiscal en Salta Capital para productos agrícolas del NOA

OpenAIRE

Balestrini González, Agustín

2016-01-01

261 p. il. La siguiente tesis busca describir cuales son los lineamientos o reglamentaciones legales que delimitan el funcionamiento de un Depósito Fiscal, como herramienta de control del órgano fiscalizador Nacional de las operaciones internacionales, la Dirección General de Aduana, que funciona dentro de la órbita de la Administración Federal de Ingresos Públicos. También se busca describir el contexto productivo en el cual podría ejecutarse este depósito y por lo tanto, se incluyó...

Effects of High-Intensity Swimming on Lung Inflammation and Oxidative Stress in a Murine Model of DEP-Induced Injury.

Directory of Open Access Journals (Sweden)

Leonardo C M Ávila

Full Text Available Studies have reported that exposure to diesel exhaust particles (DEPs induces lung inflammation and increases oxidative stress, and both effects are susceptible to changes via regular aerobic exercise in rehabilitation programs. However, the effects of exercise on lungs exposed to DEP after the cessation of exercise are not clear. Therefore, the aim of this study was to evaluate the effects of high-intensity swimming on lung inflammation and oxidative stress in mice exposed to DEP concomitantly and after exercise cessation. Male Swiss mice were divided into 4 groups: Control (n = 12, Swimming (30 min/day (n = 8, DEP (3 mg/mL-10 μL/mouse (n = 9 and DEP+Swimming (n = 8. The high-intensity swimming was characterized by an increase in blood lactate levels greater than 1 mmoL/L between 10th and 30th minutes of exercise. Twenty-four hours after the final exposure to DEP, the anesthetized mice were euthanized, and we counted the number of total and differential inflammatory cells in the bronchoalveolar fluid (BALF, measured the lung homogenate levels of IL-1β, TNF-α, IL-6, INF-ϫ, IL-10, and IL-1ra using ELISA, and measured the levels of glutathione, non-protein thiols (GSH-t and NPSH and the antioxidant enzymes catalase and glutathione peroxidase (GPx in the lung. Swimming sessions decreased the number of total cells (p<0.001, neutrophils and lymphocytes (p<0.001; p<0.05 in the BALF, as well as lung levels of IL-1β (p = 0.002, TNF-α (p = 0.003, IL-6 (p = 0.0001 and IFN-ϫ (p = 0.0001. However, the levels of IL-10 (p = 0.01 and IL-1ra (p = 0.0002 increased in the swimming groups compared with the control groups, as did the CAT lung levels (p = 0.0001. Simultaneously, swimming resulted in an increase in the GSH-t and NPSH lung levels in the DEP group (p = 0.0001 and p<0.002. We concluded that in this experimental model, the high-intensity swimming sessions decreased the lung inflammation and oxidative stress status during DEP-induced lung

O depósito subungueal como disseminador e enteroparasitos

Directory of Open Access Journals (Sweden)

Carlos Alberto Moreira Campos

1974-04-01

Full Text Available Demonstramos, no depósito subungueal de 130 crianças residentes no bairro de Nova Descoberta, Natal - RN, a presença de ovos ou cistos de enteroparasitos, tais como: Ascaris lumbricoides, Trichocephalus trichiurus, Enterobius vermicularis, Ancylostomidae, Entamoeba coli, Entamoeba histolytica e Giardia lamblia. Ao lado da demonstração dos referidos parasitos, fizemos a correlação entre a incidência parasitária e as espécies encontradas no resíduo que se forma sob as unhas. Dos enteroparasitos encontrados, parece ser esta a primeira referência a ovos de ancilostomídeos no depósito subungueal. Dos 130 exames realizados 16 mostraram-se positivos, com uma percentagem de 12,30%.In the deposit under the finger nails of 130 children living at Nova Descoberta suburb, Natal - RN, the presence of eggs or cysts enteroparasites such as: Ascaris lumbricoides, Trichocephalus trichiurus, Enterobius vermicularis, Ancylostomidae, Entamoeba histolytica e Giardia lamblia was detected. Besides the demonstration of the abovementioned parasites, a correlation between the parasite incidence and the species found in the residue acumulated under the finger nails was tried.

Human Resource Development and New Technology in the Automobile Industry: A Case Study of Ford Motor Company's Dearborn Engine Plant. The Development and Utilization of Human Resources in the Context of Technological Change and Industrial Restructuring.

Science.gov (United States)

Chen, Kan; And Others

This report centers around a plant-level study of the development and utilization of human resources in the context of technological change and industrial restructuring in the crankshaft production area of Ford Motor Company's Dearborn Engine Plant (DEP). The introductory chapter describes how the study was conducted, provides an introduction to…

ENHANCED PRODUCTION OF POLYHYDROXYBUTYRATE (PHB FROM AGRO-INDUSTRIAL WASTES; FED-BATCH CULTIVATION AND STATISTICAL MEDIA OPTIMIZATION

Directory of Open Access Journals (Sweden)

Mahmoud M. Berekaa

2016-06-01

Full Text Available Bacillus megaterium SW1-2 showed enhanced growth and polyhydroxybutyrate (PHB production during cultivation on date palm syrup (DEPS or sugar cane molasses. FT-IR and NMR spectroscopic analyses of the polymer accumulated during growth on DEPS revealed specific absorption peaks characteristic for PHB. 1.65 g/L of PHB (56.9% CDW was produced during growth on medium supplemented with 2 g/L of DEPS. Approximately, 36.1% CDW of PHB were recorded during growth on sugar cane molasses. Six runs of different fed-batch cultivation strategies were tested, the optimal run showed approximately 6.87-fold increase. Modified E2 medium was prefered recording 10.11 and 11.34 g/L of total PHB produced for runs 1 and 2, at the end of 96 h incubation period, respectively. Decrease in PHB was recorded during growth on complex medium (run 3 and run 4. In another independent optimization strategy, ten variables were concurrently examined for their significance on PHB production by Plackett-Burman statistical design for the first time. Among variables, DEPS-II and inoculum concentration followed by KH2PO4 and (NH42SO4 were found to be the most significant variables encourage PHB production. Indeed, DEPS-II or Fresh syrup is more significant than commercial syrup DEPS-I (p-value= 0.05. RPM, incubation period have highly negative effect on PHB production. Role of ago-industrial wastes, especially DEPS, in enhancement of PHB production was closely discussed.

Three-Dimensional Interaction of a Large Number of Dense DEP Particles on a Plane Perpendicular to an AC Electrical Field

Directory of Open Access Journals (Sweden)

Chuanchuan Xie

2017-01-01

Full Text Available The interaction of dielectrophoresis (DEP particles in an electric field has been observed in many experiments, known as the “particle chains phenomenon”. However, the study in 3D models (spherical particles is rarely reported due to its complexity and significant computational cost. In this paper, we employed the iterative dipole moment (IDM method to study the 3D interaction of a large number of dense DEP particles randomly distributed on a plane perpendicular to a uniform alternating current (AC electric field in a bounded or unbounded space. The numerical results indicated that the particles cannot move out of the initial plane. The similar particles (either all positive or all negative DEP particles always repelled each other, and did not form a chain. The dissimilar particles (a mixture of positive and negative DEP particles always attracted each other, and formed particle chains consisting of alternately arranged positive and negative DEP particles. The particle chain patterns can be randomly multitudinous depending on the initial particle distribution, the electric properties of particles/fluid, the particle sizes and the number of particles. It is also found that the particle chain patterns can be effectively manipulated via tuning the frequency of the AC field and an almost uniform distribution of particles in a bounded plane chip can be achieved when all of the particles are similar, which may have potential applications in the particle manipulation of microfluidics.

Depósito elevado, en Belfast

Directory of Open Access Journals (Sweden)

Gibberd Cbe, Felix

1964-07-01

Full Text Available An outstanding feature of the buildings which constitute the modern Ulster Hospital, at Dundonald, Belfast, is the elevated tank which supplies the hospital with water. The shape of this tank is pleasant and it provides a charming and smooth outline against the sky: it is reminiscent of a large sized drinking cup. The structure, made of reinforced concrete, is of straighforward design. The central support is used as the chimney stack for the boiler room. The water tank has an overall height of 32.5 m and will hold 450 cubic metres of water. The tank itself is 15.5 m high and has a maximum diameter of 10 m. The walls vary in thickness between 0.32 and 0.15 m. The hoop reinforcement is provided by 19 mm bars, whilst the radial reinforcement consists of 9 mm wires. The central column, or stack, has a wall thickness of 0.15 m, and is of circular cross section. Vertical 35 mm rods provide the metal reinforcement. Externally, this central column has eight ribs, 20 cm wide and 30 cm deep. The whole structure rests on an octogonal slab, with a maximum horizontal dimension of 9 m and is 2 m thick. The maximum tensile strength allowed for the concrete, when working in the most unsatisfactory conditions, is 12 kg/cm2.Entre las distintas construcciones que constituyen el moderno hospital Ulster de Dundonald, en Belfast (Irlanda del Norte, destaca, particularmente, el depósito elevado para el suministro y reserva de agua. Desde el punto de vista arquitectónico, su forma es de plástica agradable y de línea suave y graciosa, puesto que reproduce la silueta de una copa, de gran tamaño, muy utilizada. Su estructura, de hormigón armado, es sencilla y ha permitido aprovechar el núcleo central o soporte, hueco, para chimenea de la sala, de calderas. La altura total del depósito es de 33,50 m y su capacidad de 450 m3. El depósito propiamente dicho tiene 15,5 m de altura y 10 m de diámetro máximo. El espesor de las paredes varía de 0,33 a 0,15 m. Las

Advances in production technology

CERN Document Server

2015-01-01

This edited volume contains the selected papers presented at the scientific board meeting of the German Cluster of Excellence on “Integrative Production Technology for High-Wage Countries”,  held in November 2014. The topical structure of the book is clustered in six sessions: Integrative Production Technology, Individualised Production, Virtual Production Systems, Integrated Technologies, Self-Optimising Production Systems and Human Factors in Production Technology. The Aachen perspective on a holistic theory of production is complemented by conference papers from external leading researchers in the fields of production, materials science and bordering disciplines. The target audience primarily comprises research experts and practitioners in the field but the book may also be beneficial for graduate students.

Antecedentes y reforma en la administración de depósitos del Cabildo Catedral de Toledo (1591-1613

Directory of Open Access Journals (Sweden)

Susana Villaluenga de Gracia

2010-07-01

del arca. Tras su aprobación, el memorial regularía la elección anual del depositario, dificultando su reelección, intensificaría el control sobre el depósito con el nombramiento de dos visitadores y concretaría el proceder en el registro de las operaciones que se ejecutaban en torno al mismo. A este respecto, cada entrada y salida de dinero del depósito se anotaba en dos libros: libro primero y segundo del arca de depósitos, cuya teneduría ratificaba el Memorial. Además de estos dos libros, las operaciones se registraban en un Manual y Mayor por partida doble. Al final del año y, antes de la elección de los oficios prevista para el 22 de diciembre, los visitadores tomaban la cuenta al depositario por cargo y descargo, revelándose este método compatible con la partida doble, como se demostrará en este trabajo.

Marketing technologically advanced products

NARCIS (Netherlands)

Bender, Horst

1989-01-01

This paper calls for a merger of technology and marketing under a customer value perspective; for an enhancement of the traditional technological innovation orientation of the technology-based firm with a market thrust. It establishes technology-based products as product-service offerings that are

1 Arc-second Digital Elevation Models (DEMs) - USGS National Map 3DEP Downloadable Data Collection

Data.gov (United States)

U.S. Geological Survey, Department of the Interior — This is a tiled collection of the 3D Elevation Program (3DEP) and is 1 arc-second (approximately 30 m) resolution.The elevations in this Digital Elevation Model...

Depósito elevado de agua en Baydon Wiltshire - Gran Bretaña

Directory of Open Access Journals (Sweden)

Percey Scherrer, Edmund

1980-11-01

Full Text Available The elevated water tank in Baydon, built to supply, among other edifices, a service station located on the M 4 highway, is 18 m high and holds 50,000 liters. It is made up by a central column of in situ concrete, triangular prefabricated beams —which support the tank— and prefabricated aggregate panels for the outside. The choice of neutral colors for the building materials contributed to the preservation of the appearance of the countryside.

El depósito elevado de agua de Baydon construido para abastecer, entre otras edificaciones, una estación de servicio situada en la autopista M 4, tiene 18 m de altura y 50.000 litros de capacidad. Está formado por una columna central de hormigón in situ, unas vigas prefabricadas triangulares —que soportan el depósito de agua propiamente dicho— y unos paneles prefabricados de árido visto para la parte exterior. La elección de colores neutros, para los materiales de construcción, contribuyó a no deteriorar el paisaje.

Nano Manufacturing - Products and Technologies

DEFF Research Database (Denmark)

Hansen, Hans Nørgaard; Alting, Leo

2004-01-01

The use of micro and nano technologies in components and products not only sets new demands to the manufacturing technologies. Product concepts have to be rethought and redefined in order to implement the micro and nano technologies into functional systems. Both a technology driven and a product ...

Alaska 2 Arc-second Digital Elevation Models (DEMs) - USGS National Map 3DEP Downloadable Data Collection

Data.gov (United States)

U.S. Geological Survey, Department of the Interior — This is a tiled collection of the 3D Elevation Program (3DEP) and is 2 arc-second (approximately 60 m) resolution covering Alaska. The elevations in this Digital...

Influência de depósito de lixo na fitossociologia das espécies arbóreas de cerrado

OpenAIRE

Santana, Otacílio Antunes

2007-01-01

Mudanças na estrutura física e química do solo e nas águas subterrâneas foram observadas em regiões adjacentes aos depósitos de lixo, com acúmulo de metais pesados e nutrientes. Geralmente, existe uma vegetação nativa associada a esses depósitos em suas áreas adjacentes. Os objetivos deste trabalho foram: i) realizar o levantamento da composição das espécies arbóreas nativas de Cerrado e quantificar seus parâmetros fitossociológicos; ii) realizar o levantamento das espécies arbóreas exóticas ...

PDT (Product Data Technology), Production and Society

DEFF Research Database (Denmark)

Vesterager, Johan

1997-01-01

Information and communication technology (ICT) constitute a genuine technical revolution by enabling a dynamic and flexible support or automation of knowledge and information work. Bearing in mind that products are frozen knowledge, ICT as known will change the way we produce products dramatically....... The use of ICT in engineering of products constitutes product data technology (PDT).This paper presents a a basic platform for an understanding the ongoing revolution with focus on the PDT-area taking outset in the fundamental elements of knowledge and information work: creation, transformation...

Direct current insulator based dielectrophoresis (DC-iDEP) microfluidic chip for blood plasma separation

OpenAIRE

Mohammadi, Mahdi

2015-01-01

Lab-on-a-Chip (LOC) integrated microfluidics has been a powerful tool for new developments in analytical chemistry. These microfluidic systems enable the miniaturization, integration and automation of complex biochemical assays through the reduction of reagent use and enabling portability.Cell and particle separation in microfluidic systems has recently gained significant attention in many sample preparations for clinical procedures. Direct-current insulator-based dielectrophoresis (DC-iDEP) ...

Aspectos metodológicos para análise de depósitos de pulverizações pela determinação dos depósitos pontuais Methodological aspects for spray deposit analysis by punctual deposit determination

Directory of Open Access Journals (Sweden)

R.T. Souza

2007-03-01

Full Text Available Objetivou-se com este trabalho avaliar a variabilidade dos depósitos de traçadores, simulando herbicidas aplicados em pós-emergência, em populações de Brachiaria plantaginea e Commelina benghalensis infestantes da cultura da soja. Os depósitos dos traçadores foram também avaliados em plantas da cultura, utilizando-se o pulverizador de barra tratorizado, com pontas de jato plano da série 110-SF-03, aplicando o volume de 250 L ha-1 de calda preparada com 0,18% de corante Azul Brilhante e 0,18% de Amarelo Saturn Yellow. Os alvos naturais utilizados foram: plantas de soja com 150 repetições; B. plantaginea no estádio de duas a oito folhas, coletadas na linha da cultura com 141 repetições; e B. plantaginea e C. benghalensis nas entrelinhas, com 150 e 50 repetições, respectivamente. Os alvos artificiais foram constituídos por lâminas distribuídas a 0, 12,2 e 22,5 cm da linha da cultura. Após a aplicação, os alvos foram coletados individualmente e lavados com 30, 20 e 15 mL de água deionizada, para soja, lâminas e plantas daninhas, respectivamente. Estas originaram as amostras analisadas em espectrofotômetro, estimando-se o depósito de calda em µL por planta e µL cm² de área foliar. Foram ajustadas curvas de regressão entre os depósitos unitários e as freqüências acumuladas, utilizando-se o modelo de Gompertz. As relações entre os depósitos máximos e mínimos foram de 7, 4, 10 e 6 para soja, C. benghalensis e B. plantaginea na linha e na entrelinha, respectivamente. As plantas de B. plantaginea da entrelinha receberam, em média, 34% a mais de depósito do que as plantas da linha.The objective of this research was to study the variability of individual tracer deposits (simulating herbicides applied in post-emergence on Brachiaria plantaginea and Commelina benghalensis infesting soybeans crop. The tracer deposits were evaluated also on the crop. A boom sprayer was used, equipped with 110-SF-03 nozzles and 250 L ha

Increase of diesel car raises health risk in spite of recent development in engine technology

Directory of Open Access Journals (Sweden)

Jong Han Leem

2014-09-01

Full Text Available Diesel exhaust particles (DEP contain elemental carbon, organic compounds including Polyaromatic hydrocarbons (PAHs, metals, and other trace compounds. Diesel exhaust is complex mixture of thousands of chemicals. Over forty air contaminants are recognized as toxicants, such as carcinogens. Most diesel exhaust particles have aerodynamic diameters falling within a range of 0.1 to 0.25 μm. DEP was classified as a definite human carcinogen (group 1 by the International Agency for Research on Cancer at 2012 based on recently sufficient epidemiological evidence for lung cancer. Significant decreases in DEP and other diesel exhaust constituents will not be evident immediately, and outworn diesel car having longer mileage still threatens health of people in spite of recent remarkable development in diesel engine technology. Policy change in South Korea, such as introduction of diesel taxi, may raise health risk of air pollution in metropolitan area with these limitations of diesel engine. To protect people against DEP in South Korea, progressive strategies are needed, including disallowance of diesel taxi, more strict regulation of diesel engine emission, obligatory diesel particulate filter attachment in outworn diesel car, and close monitoring about health effects of DEP.

Design of Agricultural Cleaner Production Technology System

OpenAIRE

Hu, Jun-mei; Wang, Xin-jie

2009-01-01

Based on the introduction of agricultural cleaner production, technology system design of planting cleaner production is discussed from five aspects of water-saving irrigation technology, fertilization technology, diseases and insects control technology, straw comprehensive utilization technology and plastic film pollution control technology. Cleaner production technology system of livestock and poultry raise is constructed from the aspects of source control technology, reduction technique in...

Hybrid Modeling Method for a DEP Based Particle Manipulation

Directory of Open Access Journals (Sweden)

Mohamad Sawan

2013-01-01

Full Text Available In this paper, a new modeling approach for Dielectrophoresis (DEP based particle manipulation is presented. The proposed method fulfills missing links in finite element modeling between the multiphysic simulation and the biological behavior. This technique is amongst the first steps to develop a more complex platform covering several types of manipulations such as magnetophoresis and optics. The modeling approach is based on a hybrid interface using both ANSYS and MATLAB to link the propagation of the electrical field in the micro-channel to the particle motion. ANSYS is used to simulate the electrical propagation while MATLAB interprets the results to calculate cell displacement and send the new information to ANSYS for another turn. The beta version of the proposed technique takes into account particle shape, weight and its electrical properties. First obtained results are coherent with experimental results.

Integrative production technology theory and applications

CERN Document Server

Özdemir, Denis

2017-01-01

This contributed volume contains the research results of the Cluster of Excellence “Integrative Production Technology for High-Wage Countries”, funded by the German Research Society (DFG). The approach to the topic is genuinely interdisciplinary, covering insights from fields such as engineering, material sciences, economics and social sciences. The book contains coherent deterministic models for integrative product creation chains as well as harmonized cybernetic models of production systems. The content is structured into five sections: Integrative Production Technology, Individualized Production, Virtual Production Systems, Integrated Technologies, Self-Optimizing Production Systems and Collaboration Productivity.The target audience primarily comprises research experts and practitioners in the field of production engineering, but the book may also be beneficial for graduate students. .

Computational Analysis of Enhanced Circulating Tumour Cell (CTC Separation in a Microfluidic System with an Integrated Dielectrophoretic-Magnetophorectic (DEP-MAP Technique

Directory of Open Access Journals (Sweden)

Wan Shi Low

2016-08-01

Full Text Available Cell based cancer analysis is an important analytic method to monitor cancer progress on stages by detecting the density of circulating tumour cells (CTCs in the blood. Among the existing microfluidic techniques, dielectrophoresis (DEP, which is a label-free detection method, is favoured by researchers. However, because of the high conductivity of blood as well as the rare presence of CTCs, high separation efficiency is difficult to achieve in most DEP microdevices. Through this study, we have proposed a strategy to improve the isolation performance, as such by integrating a magnetophoretic (MAP platform into a DEP device. Several important aspects to be taken into MAP design consideration, such as permanent magnet orientation, magnetic track configuration, fluid flow parameter and separation efficiency, are discussed. The design was examined and validated by numerical simulation using COMSOL Multiphysics v4.4 software (COMSOL Inc., Burlington, MA, USA, mainly presented in three forms: surface plot, line plot, and arrow plot. From these results, we showed that the use of a single permanent magnet coupled with an inbuilt magnetic track of 250 μm significantly strengthens the magnetic field distribution within the proposed MAP stage. Besides, in order to improve dynamic pressure without compromising the uniformity of fluid flow, a wide channel inlet and a tree-like network were employed. When the cell trajectory within a finalized MAP stage is computed with a particle tracing module, a high separation efficiency of red blood cell (RBC is obtained for blood samples corresponding up to a dilution ratio of 1:7. Moreover, a substantial enhancement of the CTCs’ recovery rate was also observed in the simulation when the purposed platform was integrated with a planar DEP microdevice.

Predimensionamiento de la estructura perimetral de un gran depósito de agua

OpenAIRE

Liria Montañés, José; Sainz Borda, José Ángel

1983-01-01

RESUMEN. Una de las obras más características del proyecto de abastecimientos de aguas a poblaciones son los depósitos, cuyos elementos estructurales deben diseñarse atendiendo a su estabilidad y a una optimización de su costo, proceso muy influenciado por el terreno. La pared perimetral tiene gran importancia es este diseño, y a su estudio se dedica este artículo, que ofrece ábacos de aplicación inmediata al predimensionamiento de este tipo de estructuras.

Estudio fotogramétrico del depósito de agua de Canteras

OpenAIRE

Aparicio Cirre, María M.

2008-01-01

El Deposito de Agua de Canteras, forma parte de una manzana limitada entre las calles Trujillo, Tornavacas, Cestona y carretera del cementerio, por la cual se accede al inmueble. Y por su parte trasera está limitada por las canteras romanas. El Depósito de Agua está formado principalmente por dos naves, una longitudinal y otra transversal, en planta tiene forma de “t”. Las dimensiones de la nave longitudinal donde se almacena el agua son: 2naves x 9,8m de largo x 5,7m de ancho x 2,4m de pr...

HvDep1 Is a Positive Regulator of Culm Elongation and Grain Size in Barley and Impacts Yield in an Environment-Dependent Manner.

Directory of Open Access Journals (Sweden)

Toni Wendt

Full Text Available Heterotrimeric G proteins are intracellular membrane-attached signal transducers involved in various cellular processes in both plants and animals. They consist of three subunits denoted as α, β and γ. The γ-subunits of the so-called AGG3 type, which comprise a transmembrane domain, are exclusively found in plants. In model species, these proteins have been shown to participate in the control of plant height, branching and seed size and could therefore impact the harvestable yield of various crop plants. Whether AGG3-type γ-subunits influence yield in temperate cereals like barley and wheat remains unknown. Using a transgenic complementation approach, we show here that the Scottish malting barley cultivar (cv. Golden Promise carries a loss-of-function mutation in HvDep1, an AGG3-type subunit encoding gene that positively regulates culm elongation and seed size in barley. Somewhat intriguingly, agronomic field data collected over a 12-year period reveals that the HvDep1 loss-of-function mutation in cv. Golden Promise has the potential to confer either a significant increase or decrease in harvestable yield depending on the environment. Our results confirm the role of AGG3-type subunit-encoding genes in shaping plant architecture, but interestingly also indicate that the impact HvDep1 has on yield in barley is both genotypically and environmentally sensitive. This may explain why widespread exploitation of variation in AGG3-type subunit-encoding genes has not occurred in temperate cereals while in rice the DEP1 locus is widely exploited to improve harvestable yield.

Multiplicador monetario y dinero electrónico. Creación de dinero a partir de depósitos y efectivo electrónico

OpenAIRE

Ricardo Plaza Martínez

2014-01-01

En el presente trabajo se analiza, por medio del multiplicador monetario, el hipotético papel que pueda llegar a tener el dinero electrónico en el conjunto de la oferta monetaria. Suponiendo una sustitución o compra de efectivo tradicional o depósitos a la vista por dinero electrónico, y distinguiendo 2 tipos de dinero electrónico —depósitos de dinero electrónico y efectivo electrónico—, así como tomando en cuenta diferentes formas de emisión en relación con la exigencia de distintos coeficie...

Depósito elevado para la Fiat

Directory of Open Access Journals (Sweden)

Nervi, Pier Luigi

1965-07-01

Full Text Available At the Turin Fiat factory an elevated water tank has been built, with a capacity of 2,000 m3 60 m above the ground, and cup shaped. The structure is reinforced concrete, and prefabricated panels are used, which are supported by a concrete disc, a cylindrical crown and radial ribs. The whole rests on piles. The stem is 8 m in diameter, and has been constructed with the aid of U shaped cylindrical panels, 3 cm in thickness, which served as external formwork for the stem walls. These are 60 cm thick at the bottom, and 50 cm at the top. The tank itself is a paraboloid, made with triangular panels which together form conical circular rings. These also served as formwork, and were supported by a tubular scaffolding. An observation post has been built on top of the tank. It is 25 m in diameter, and is covered with a ribbed spherical cupola, supported by hinged columns, which allow radial deformations, which are not transmitted to the top ring of the tank. The latter, being full of water, is kept at a more uniform temperature than the cupular roof, which is fully exposed to the weather.En la factoría Fiat, de Turín (Italia, se ha construido este depósito elevado, en forma de copa, de 2.000 m3 de capacidad y unos 60 m de altura sobre el suelo. Es de hormigón armado y paneles prefabricados, apoyándose sobre un disco de hormigón, una corona cilíndrica y contrafuertes radiales; todo lo cual descansa sobre pilotes. El fuste, de 8 m de diámetro, se ha construido con la ayuda de una serie de paneles, de superficie cilíndrica y sección transversal en forma de U con alas asimétricas, de 3 cm de espesor, que sirvieron de encofrado exterior en el hormigonado de las paredes, cuyo espesor varía de 60 cm en la zona inferior a 50 cm en la superior. La cubeta es un meridiano parabólico de revolución, constituido por paneles triangulares, formando anillos troncocónicos, que se utilizaron también como encofrado, apoyado sobre un entramado tubular en

Glomerulonefritis fibrilar: Una rara forma de enfermedad glomerular por depósitos organizados

Directory of Open Access Journals (Sweden)

Marta B. Cabrera

2011-10-01

Full Text Available Se describe el caso de una mujer de 67 años de edad que consultó por debilidad y astenia, constatándose proteinuria de rango nefrótico y dislipemia. Se realizó punción para biopsia renal, la que se analizó por microscopia óptica, inmunofluorescencia y microscopia electrónica de transmisión. El análisis ultra-estructural reveló la existencia de depósitos fibrilares organizados, rectos, no ramificados, cuyo espesor osciló entre 15 y 20 nm. Dichas fibrillas ópticamente se veían como una expansión mesangial discretamente nodular, ligeramente PAS positiva, rojo Congo negativa y débilmente positiva para IgG. El diagnóstico fue glomerulonefritis fibrilar. Las enfermedades glomerulares por depósitos organizados pueden exhibir superposición sindrómica e histopatológica. Por tal motivo, resulta de importancia una primera separación entre aquellas rojo Congo positivas o negativas, siendo en este último caso la microscopia electrónica de transmisión la que diferencia dos entidades: la glomerulonefritis fibrilar y la glomerulonefritis inmunotactoide. Esta diferencia se apoya no sólo en las características ultraestructurales, sino en sus características clínicas. La glomerulonefritis inmunotactoide muestra una fuerte asociación con procesos linfoproliferativos, a diferencia de lo que ocurre con la glomerulonefritis fibrilar.

Technology Management within Product Lines in High Technology Markets

Science.gov (United States)

Sarangee, Kumar R.

2009-01-01

Understanding the nuances of product line management has been of great interest to business scholars and practitioners. This assumes greater significance for firms conducting business in technologically dynamic industries, where they face certain challenges regarding the management of multiple, overlapping technologies within their product lines.…

Caracterización composicional de los depósitos arenosos actuales generados en el Sistema Central

Directory of Open Access Journals (Sweden)

Arribas, J.

1989-08-01

Full Text Available In this work we have studied the light mineral fraction of modern sands derived from single source lithologies (plutonic, gneissic or slate-schists in the Sistema Central (Central Spain. In this way we can analize the control of the source area lithology in sand composition. First we pay attention on tbe control of grain size sand in composition. Rock fragments decrease when grain size decreases. However, the amount of feldspar increases due to its low mechanical stability. Thus, the K/P index (K-feldspar/plagioclases is highly variable with grain size, because the different mechanical stabilities of both minerals. The trends of the amounts of components in relation with grain size are very similar, in a11 deposits. However, each percentages vary markedly between source areas with different lithologies. The projection area of the studied sands in a QFFR díagram is highly controled by grain size and lithology of source area. Thus, sands derived from slate-schists lithology appear near QFR fringe in a11 grain size fractions. Sands derived from plutonic or gneissic rocks have a high dispersion in the diagram, fram FR pole to QF fringe, depending on grain size of the sand. We conclude that the use of a single sand size fraction (0,5-0,25 mm to provenance analysis permits to discrimine source lithologies, but with a 1055 of information about global deposit compositionSe caracteriza composicionalmente la fracción ligera arenosa de los depósitos detríticos actuales generados en zonas de cabecera de arroyos que drenan macizos del Sistema Central con distintas litologías (plutónicas, gnéisicas o pizarras-esquistos. Dicha caracterización se ha basado en el análisis petrográfico de las muestras recogidas. Este análisis se ha efectuado, en cada muestra, en cinco fracciones de tamaño con intervalos de l ̣Ǿ entre 2 mm y 0,062 mm. De este modo se estudia el control que ejercen tanto la litología del área fuente como el tamaño de grano en

Value analysis for advanced technology products

Science.gov (United States)

Soulliere, Mark

2011-03-01

Technology by itself can be wondrous, but buyers of technology factor in the price they have to pay along with performance in their decisions. As a result, the ``best'' technology may not always win in the marketplace when ``good enough'' can be had at a lower price. Technology vendors often set pricing by ``cost plus margin,'' or by competitors' offerings. What if the product is new (or has yet to be invented)? Value pricing is a methodology to price products based on the value generated (e.g. money saved) by using one product vs. the next best technical alternative. Value analysis can often clarify what product attributes generate the most value. It can also assist in identifying market forces outside of the control of the technology vendor that also influence pricing. These principles are illustrated with examples.

Selecting appropriate technology for hydrogen production

International Nuclear Information System (INIS)

Tamhankar, S.S.

2004-01-01

'Full text:' Technologies for the production of synthesis gas (H2 + CO), a precursor to hydrogen, from a variety of fossil fuels are well known in industrial applications at relatively large scale. These include Steam Reforming (SR), Auto-Thermal Reforming (ATR) and Partial Oxidation (POX). A particular technology is selected based on the feed type and the desired products. Steam reforming is a mature technology, and is most prevalent for hydrogen production because of its high efficiency. However, at the smaller scale, the capital cost becomes a more significant factor, and a substantial reduction in this cost is necessary to meet the overall H2 gas cost targets, such as that stated by DOE ($1.50/kg). In developing small-scale H2 technologies, often, incremental improvements are incorporated. While useful, these are not adequate for the desired cost reduction. Also, for effective cost reduction, the whole system, including production, purification and associated equipment needs to be evaluated; cost reduction in just one of the units is not sufficient. This paper provides a critical assessment of the existing as well as novel technology options, specifically targeted at small scale H2 production. The technology options are evaluated to clearly point out which may or may not work and why. (author)

Technological measures to improve automotive product quality

OpenAIRE

Gladkov, V.; Kruglov, S.

2010-01-01

The paper examines the basic technological measures aimed at improving product quality in automotive industry. While paying due attention to solving organizational and technological problems, including the development of certification systems for production processes, it is also necessary to improve the technical standards of specific technologies, equipment and materials as they largely determine product quality. Special emphasis is given to the importance of improving the production of auto...

NEUROTROPHINS OPERATE AT DIFFERENT LEVELS OF THE RESPIRATORY TRACT IN RESPONSES OF ALLERGIC MICE TO DIESEL EXHAUST PARTICLES (DEP)

Science.gov (United States)

Neurotrophins including NGF, NT-3, and BDNF are linked to allergic responses. Treatment with anti-p75 (pan-neurotrophin receptor) prevents the increase in airflow obstruction caused by exposure to DEP in ovalbumin (OVA)-allergic mice (Toxicol Sci 84(S1):91, 2005). Our present goa...

High performance flexible pH sensor based on carboxyl-functionalized and DEP aligned SWNTs

International Nuclear Information System (INIS)

Liu, Lu; Shao, Jinyou; Li, Xiangming; Zhao, Qiang; Nie, Bangbang; Xu, Chuan; Ding, Haitao

2016-01-01

Highlights: • The flexible chemiresistive pH sensor based on two-terminal microsensors eliminating the need for a reference electrode, is simple in structure and can be fabricated on a variety of substrates such as PET, PI and PVC. • SWNTs as an ideal one dimensional material are carboxyl-functionalized to make the pH sensor show high sensitivity and outstanding flexibility for practical applications. • DEP technique is used to manipulate and position SWNTs into appropriate locations and desired formations to improve the metal-nanotube interface and highly rapid detection of pH value, resulting in better overall device performance. • Mechanical bendability of the pH sensor, which arises from the combination of flexible PET substrates and SWNTs, offer a significant improvement for applications that are difficult or impossible to achieve with traditional sensors on rigid substrates. - Abstract: The detection and control of the pH is very important in many biomedical and chemical reaction processes. A miniaturized flexible pH sensor that is light weight, robust, and conformable is very important in many applications, such as multifunctional lab-on-a-chip systems or wearable biomedical devices. In this work, we demonstrate a flexible chemiresistive pH sensor based on dielectrophoresis (DEP) aligned carboxyl-functionalized single-walled carbon nanotubes (SWNTs). Decorated carboxyl groups can react with hydrogen (H"+) and hydroxide (OH"−) ions, enabling the sensor to be capable of sensing the pH. DEP is used to deposit well-organized and highly aligned SWNTs in desired locations, which improves the metal-nanotube interface and highly rapid detection of the pH, resulting in better overall device performance. When pH buffer solutions are dropped onto such SWNTs, the H"+ and OH"− ions caninteract with the carboxyl groups and affect the generation of holes and electrons in the SWNTs, leading to resistance variations in the SWNTs. The results shows that the

High performance flexible pH sensor based on carboxyl-functionalized and DEP aligned SWNTs

Energy Technology Data Exchange (ETDEWEB)

Liu, Lu; Shao, Jinyou, E-mail: jyshao@mail.xjtu.edu.cn; Li, Xiangming; Zhao, Qiang; Nie, Bangbang; Xu, Chuan; Ding, Haitao

2016-11-15

Highlights: • The flexible chemiresistive pH sensor based on two-terminal microsensors eliminating the need for a reference electrode, is simple in structure and can be fabricated on a variety of substrates such as PET, PI and PVC. • SWNTs as an ideal one dimensional material are carboxyl-functionalized to make the pH sensor show high sensitivity and outstanding flexibility for practical applications. • DEP technique is used to manipulate and position SWNTs into appropriate locations and desired formations to improve the metal-nanotube interface and highly rapid detection of pH value, resulting in better overall device performance. • Mechanical bendability of the pH sensor, which arises from the combination of flexible PET substrates and SWNTs, offer a significant improvement for applications that are difficult or impossible to achieve with traditional sensors on rigid substrates. - Abstract: The detection and control of the pH is very important in many biomedical and chemical reaction processes. A miniaturized flexible pH sensor that is light weight, robust, and conformable is very important in many applications, such as multifunctional lab-on-a-chip systems or wearable biomedical devices. In this work, we demonstrate a flexible chemiresistive pH sensor based on dielectrophoresis (DEP) aligned carboxyl-functionalized single-walled carbon nanotubes (SWNTs). Decorated carboxyl groups can react with hydrogen (H{sup +}) and hydroxide (OH{sup −}) ions, enabling the sensor to be capable of sensing the pH. DEP is used to deposit well-organized and highly aligned SWNTs in desired locations, which improves the metal-nanotube interface and highly rapid detection of the pH, resulting in better overall device performance. When pH buffer solutions are dropped onto such SWNTs, the H{sup +} and OH{sup −} ions caninteract with the carboxyl groups and affect the generation of holes and electrons in the SWNTs, leading to resistance variations in the SWNTs. The results

Remelt Ingot Production Technology

Science.gov (United States)

Grandfield, J. F.

The technology related to the production of remelt ingots (small ingots, sows and T-Bar) is reviewed. Open mold conveyors, sow casting, wheel and belt casting and VDC and HDC casting are described and compared. Process economics, capacity, product quality and process problems are listed. Trends in casting machine technology such as longer open mold conveyor lines are highlighted. Safety issues related to the operation of these processes are discussed. The advantages and disadvantages of the various machine configurations and options e.g. such as dry filling with the mold out of water and wet filling with the mold in water for open mould conveyors are discussed. The effect of mold design on machine productivity, mold cracking and mold life is also examined.

DEP-On-Go for Simultaneous Sensing of Multiple Heavy Metals Pollutants in Environmental Samples

Directory of Open Access Journals (Sweden)

Madhu Biyani

2016-12-01

Full Text Available We describe a simple and affordable “Disposable electrode printed (DEP-On-Go” sensing platform for the rapid on-site monitoring of trace heavy metal pollutants in environmental samples for early warning by developing a mobile electrochemical device composed of palm-sized potentiostat and disposable unmodified screen-printed electrode chips. We present the analytical performance of our device for the sensitive detection of major heavy metal ions, namely, mercury, cadmium, lead, arsenic, zinc, and copper with detection limits of 1.5, 2.6, 4.0, 5.0, 14.4, and, 15.5 μg·L−1, respectively. Importantly, the utility of this device is extended to detect multiple heavy metals simultaneously with well-defined voltammograms and similar sensitivity. Finally, “DEP-On-Go” was successfully applied to detect heavy metals in real environmental samples from groundwater, tap water, house dust, soil, and industry-processed rice and noodle foods. We evaluated the efficiency of this system with a linear correlation through inductively coupled plasma mass spectrometry, and the results suggested that this system can be reliable for on-site screening purposes. On-field applications using real samples of groundwater for drinking in the northern parts of India support the easy-to-detect, low-cost (<1 USD, rapid (within 5 min, and reliable detection limit (ppb levels performance of our device for the on-site detection and monitoring of multiple heavy metals in resource-limited settings.

Educational Potential of Case-Study Technology

OpenAIRE

Fedorinova, Zoya; Vorobeva, Victoria; Malyanova, Marina

2015-01-01

This article presents the results of phenomenological and typological analysis of case-study technology educational potential. The definition “educational potential of case-study technology” is given, the main characteristics of which are changed in communication and collaborative activity quality, appearance of educational initiatives, change of participants’ position in learning process, formation of “collective subject” in collaborative activity, increase of learning (subject) results. Dep...

Espadas y puñales del bronce final: el depósito de armas de Puertollano (Ciudad Real

Directory of Open Access Journals (Sweden)

Montero Ruiz, Ignacio

2002-12-01

Full Text Available This paper deals with the technological study of a new Late Bronce Age hoard found in Puertollano (Ciudad Real. This hoard is a singular found in the context of Iberian Peninsula due to the number of items (14 swords and daggers and 1 fragment of ferrule and all of them are weapons. Elemental analysis by PIXE shows a Copper-Tin alloy with very low impurity pattern. A general comment about the real use of this weapons is included.

Se presenta el estudio tecnológico de un nuevo depósito del Bronce Final aparecido en Puertollano (Ciudad Real. Compuesto exclusivamente por armas (14 espadas y puñales y un fragmento de regatón constituye un deposito singular entre los conocidos en la Península ibérica. Se incluyen los análisis de composición mediante técnica PIXE que indican que todas las piezas son bronces binarios Cu-Sn con bajo nivel de impurezas. Se discute sobre la funcionalidad y uso práctico de estas producciones armamentísticas.

Dynamic changes in the expression of DEP-1 and other PDGF receptor-antagonizing PTPs during onset and termination of neointima formation.

Science.gov (United States)

Kappert, Kai; Paulsson, Janna; Sparwel, Jan; Leppänen, Olli; Hellberg, Carina; Ostman, Arne; Micke, Patrick

2007-02-01

Growth factor-dependent tissue remodeling, such as restenosis, is believed to be predominantly regulated by changes in expression of receptor-tyrosine-kinases (RTKs) and their ligands. As endogenous antagonists of RTKs, protein-tyrosine-phosphatases (PTPs) are additional candidate regulators of these processes. Using laser-capture-microdissection and quantitative RT-polymerase chain reaction (qRT-PCR), we investigated the layer-specific expression of the four platelet-derived growth factor (PDGF) isoforms, the PDGF-alpha and beta receptors, and five PTPs implied in control of PDGF-receptor signaling 8 and 14 days after balloon injury of the rat carotid. Results were correlated with analyses of PDGF-beta receptor phosphorylation and vascular smooth muscle cell (VSMC) proliferation in vivo. The expression levels of all components, as well as receptor activation and VSMC proliferation, showed specific changes, which varied between media and neointima. Interestingly, PTP expression--particularly, DEP-1 levels--appeared to be the dominating factor determining receptor-phosphorylation and VSMC proliferation. In support of these findings, cultured DEP-1(-/-) cells displayed increased PDGF-dependent cell signaling. Hyperactivation of PDGF-induced signaling was also observed after siRNA-down-regulation of DEP-1 in VSMCs. The results indicate a previously unrecognized role of PDGF-receptor-targeting PTPs in controlling neointima formation. In more general terms, the observations indicate transcriptional regulation of PTPs as an important mechanism for controlling onset and termination of RTK-dependent tissue remodeling.

Production Situation and Technology Prospect of Medical Isotopes

Directory of Open Access Journals (Sweden)

GAO Feng;LIN Li;LIU Yu-hao;MA Xing-jun

2016-10-01

Full Text Available The isotope production technology was overviewed, including traditional and newest technology. The current situation of medical isotope production was introduced. The problems faced by isotope supply and demand were analyzed. The future development trend of medical isotopes and technology prospect were put forward. As the most populous country, nuclear medicine develops rapidly, however, domestic isotope mainly relies on imports. The highly productive and relatively safe MIPR is expected to be an effective way to breakthrough the bottleneck of the development of nuclear medicine. Traditional isotope production technologies with reactor can be improved. It's urgent to research and promote new isotope production technologies with reactor. Those technologies which do not depend on reactor will have a bright market prospects.

Technology's Impact on Production

Energy Technology Data Exchange (ETDEWEB)

Rachel Amann; Ellis Deweese; Deborah Shipman

2009-06-30

As part of a cooperative agreement with the United States Department of Energy (DOE) - entitled Technology's Impact on Production: Developing Environmental Solutions at the State and National Level - the Interstate Oil and Gas Compact Commission (IOGCC) has been tasked with assisting state governments in the effective, efficient, and environmentally sound regulation of the exploration and production of natural gas and crude oil, specifically in relation to orphaned and abandoned wells and wells nearing the end of productive life. Project goals include: (1) Developing (a) a model framework for prioritization and ranking of orphaned or abandoned well sites; (b) a model framework for disbursement of Energy Policy Act of 2005 funding; and (c) a research study regarding the current status of orphaned wells in the nation. (2) Researching the impact of new technologies on environmental protection from a regulatory perspective. Research will identify and document (a) state reactions to changing technology and knowledge; (b) how those reactions support state environmental conservation and public health; and (c) the impact of those reactions on oil and natural gas production. (3) Assessing emergent technology issues associated with wells nearing the end of productive life. Including: (a) location of orphaned and abandoned well sites; (b) well site remediation; (c) plugging materials; (d) plug placement; (e) the current regulatory environment; and (f) the identification of emergent technologies affecting end of life wells. New Energy Technologies - Regulating Change, is the result of research performed for Tasks 2 and 3.

HTTR workshop (workshop on hydrogen production technology)

International Nuclear Information System (INIS)

Shiina, Yasuaki; Takizuka, Takakazu

2004-12-01

Various research and development efforts have been performed to solve the global energy and environmental problems caused by large consumption of fossil fuels. Research activities on advanced hydrogen production technology by the use of nuclear heat from high temperature gas cooled reactors, for example, have been flourished in universities, research institutes and companies in many countries. The Department of HTTR Project and the Department of Advanced Nuclear Heat Technology of JAERI held the HTTR Workshop (Workshop on Hydrogen Production Technology) on July 5 and 6, 2004 to grasp the present status of R and D about the technology of HTGR and the nuclear hydrogen production in the world and to discuss about necessity of the nuclear hydrogen production and technical problems for the future development of the technology. More than 110 participants attended the Workshop including foreign participants from USA, France, Korea, Germany, Canada and United Kingdom. In the Workshop, the presentations were made on such topics as R and D programs for nuclear energy and hydrogen production technologies by thermo-chemical or other processes. Also, the possibility of the nuclear hydrogen production in the future society was discussed. The workshop showed that the R and D for the hydrogen production by the thermo-chemical process has been performed in many countries. The workshop affirmed that nuclear hydrogen production could be one of the competitive supplier of hydrogen in the future. The second HTTR Workshop will be held in the autumn next year. (author)

TECHNOLOGICAL LEVEL OF PRODUCTION OF RUSSIAN ORGANIZATIONS

Directory of Open Access Journals (Sweden)

Galina S. Sagieva

2015-01-01

Full Text Available The article presents an analysis of the technological level of production of Russian organizations. Areas of study cover the characteristics of the use of technology in manufacturing (the extent of use and level of technology, the problems solved by using specific types of technologies and the use in the production process of intellectual property; factors driving growth of technological level of the surveyed medium and large organizations and provides them with a competitive advantage

As Technologies for Nucleotide Therapeutics Mature, Products Emerge.

Science.gov (United States)

Beierlein, Jennifer M; McNamee, Laura M; Ledley, Fred D

2017-12-15

The long path from initial research on oligonucleotide therapies to approval of antisense products is not unfamiliar. This lag resembles those encountered with monoclonal antibodies, gene therapies, and many biological targets and is consistent with studies of innovation showing that technology maturation is a critical determinant of product success. We previously described an analytical model for the maturation of biomedical research, demonstrating that the efficiency of targeted and biological development is connected to metrics of technology growth. The present work applies this model to characterize the advance of oligonucleotide therapeutics. We show that recent oligonucleotide product approvals incorporate technologies and targets that are past the established point of technology growth, as do most of the oligonucleotide products currently in phase 3. Less mature oligonucleotide technologies, such as miRNAs and some novel gene targets, have not passed the established point and have not yielded products. This analysis shows that oligonucleotide product development has followed largely predictable patterns of innovation. While technology maturation alone does not ensure success, these data show that many oligonucleotide technologies are sufficiently mature to be considered part of the arsenal for therapeutic development. These results demonstrate the importance of technology assessment in strategic management of biomedical technologies. Copyright © 2017 The Authors. Published by Elsevier Inc. All rights reserved.

Depósito de agua para la exposición universal de Roma

Directory of Open Access Journals (Sweden)

Colosimo, Roberto

1964-06-01

Full Text Available As part of the general water services for the Universal Exhibition in Rome, an elevated tank has been built, which will meet all the water requirements of this Exhibition, and constitutes one of its outstanding landmarks. The structure of the water tank is reinforced concrete. The central stem, containing the pipes, stairs and lifts, extends through the tank itself and ends in a circular central spillway. The shape of the tank is very original, and has made it possible to fit into it an observation balcony, where a bar or restaurant can also be installed. The sloping supports withstand the horizontal thrusts due to wind pressure. The weight of the water is taken up by a circular ring, from which eight cantilever beams extend inwards. These do not reach to the centre, as this space is taken up with the services. The foundation consists of a circular slab, made of concrete, in the shape of truncated cone, 28.5 m diam. at the bottom, and 27.2 m at the top, and is 2.3 m thick. This slab rests on 301 piles. The water tank rises to a height of 51 m and can hold 2,500 m3 of water. It is absolutely watertight.Dentro del plan general hidráulico realizado por el señor Colosimo para la exposición Universal de Roma, y como remate del mismo, se ha construido este depósito elevado, destinado a cubrir las necesidades totales del recinto. La estructura es de hormigón armado. El núcleo central, que contiene las canalizaciones, escaleras y ascensores, se prolonga en el interior del depósito propiamente dicho y termina formando una cuneta anular que sirve de rebosadero. La forma particularmente original de la, copa, ha permitido crear un mirador en el que se podrá instalar un bar o restaurante. Los soportes oblicuos absorben los esfuerzos horizontales que crea el efecto del viento. La carga hidrostática, que origina el agua es resistida por un anillo circular del cual parten ocho ménsulas que no se han podido prolongar en el interior del cuerpo central

Cost-saving production technologies and partial ownership

OpenAIRE

Juan Carlos Barcena-Ruiz; Norma Olaizola

2007-01-01

This work analyzes the incentives to acquire cost-saving production technologies when cross-participation exists at ownership level. We show that cross-participation reduces the incentives to adopt the cost-saving production technology.

Strategies for fuel cell product development. Developing fuel cell products in the technology supply chain

International Nuclear Information System (INIS)

Hellman, H.L.

2004-01-01

Due to the high cost of research and development and the broad spectrum of knowledge and competences required to develop fuel cell products, many product-developing firms outsource fuel cell technology, either partly or completely. This article addresses the inter-firm process of fuel cell product development from an Industrial Design Engineering perspective. The fuel cell product development can currently be characterised by a high degree of economic and technical uncertainty. Regarding the technology uncertainty: product-developing firms are more often then not unfamiliar with fuel cell technology technology. Yet there is a high interface complexity between the technology supplied and the product in which it is to be incorporated. In this paper the information exchange in three current fuel cell product development projects is analysed to determine the information required by a product designer to develop a fuel cell product. Technology transfer literature suggests that transfer effectiveness is greatest when the type of technology (technology uncertainty) and the type of relationship between the technology supplier and the recipient are carefully matched. In this line of thinking this paper proposes that the information required by a designer, determined by the design strategy and product/system volume, should be met by an appropriate level of communication interactivity with a technology specialist. (author)

Current biodiesel production technologies: A comparative review

International Nuclear Information System (INIS)

Abbaszaadeh, Ahmad; Ghobadian, Barat; Omidkhah, Mohammad Reza; Najafi, Gholamhassan

2012-01-01

Highlights: ► In this paper we review the technologies related to biodiesel production. ► 4 Primary approaches reviewed are direct use and blending of oils, micro-emulsions, pyrolysis and transesterification method. ► Both advantages and disadvantages of the different biodiesel production methods are also discussed. ► The most common technology of biodiesel production is transesterification of oils. ► Selection of a transesterification method depends on the amount of FFA and water content of the feedstock. - Abstract: Despite the high energy demand in the industrialized world and the pollution problems caused by widespread use of fossil fuels, the need for developing renewable energy sources with less environmental impacts are increasing. Biodiesel production is undergoing rapid and extensive technological reforms in industries and academia. The major obstacle in production and biodiesel commercialization path is production cost. Thus, in previous years numerous studies on the use of technologies and different methods to evaluate optimal conditions of biodiesel production technically and economically have been carried out. In this paper, a comparative review of the current technological methods so far used to produce biodiesel has been investigated. Four primary approaches to make biodiesel are direct use and blending of vegetable oils, micro-emulsions, thermal cracking (pyrolysis) and transesterification. Transesterification reaction, the most common method in the production of biodiesel, is emphasized in this review. The two types of transestrification process; catalytic and non-catalytic are discussed at length in the paper. Both advantages and disadvantages of the different biodiesel production methods are also discussed.

Estudio de la concentración microbiana del aire en depósitos del Archivo Nacional de Cuba

Directory of Open Access Journals (Sweden)

Sofía Flavia Borrego Alonso

2010-09-01

Full Text Available Actualmente el estudio de la microbiota en ambientes interiores es de interés para los especialistas, pues los microorganismos pueden provocar afectaciones a la salud de las personas y causar el biodeterioro de colecciones valiosas. Los objetivos del trabajo fueron: determinar la concentración microbiana del aire en depósitos del Archivo Nacional de Cuba, realizar la identificación taxonómica de los hongos aislados y definir el riesgo potencial que ellos representan para el biodeterioro del patrimonio documental y la salud del personal. El muestreo microbiológico se realizó en verano e invierno y en 6 depósitos, empleando un método de sedimentación. Para aislar hongos y bacterias se emplearon placas de Petri con medios de cultivo adecuados que se colocaron por triplicado a 3m de altura. Se determinó cualitativamente la actividad celulolítica, la producción de pigmentos y de ácidos a los hongos aislados. La microbiota viable total fue mayor en invierno que en verano, siendo la concentración bacteriana significativamente superior en esta estación (sequía en tanto que la fúngica es más elevada en verano. Los géneros fúngicos que predominaron en invierno fueron Aspergillus, Cladosporium, Penicillium, Curvularia y Alternaria, mientras que en verano prevaleció Cladosporium y se aislaron los géneros Fusarium, Mucor y Chrysonilia que llegaron a alcanzar niveles significativos en algunos depósitos. Los hongos aislados degradaron celulosa, produjeron pigmentos y ácidos. Asimismo, se evidenció que pueden provocar estados alérgicos y enfermedades respiratorias a las personas. Con relación a las bacterias del aire, predominaron las Gram positivas y se identificaron los géneros Enterobacter, Hafnia, Serratia, Streptomyces, Bacillus, Streptococcus y Staphylococcus. De igual manera, se detectó que las bacterias identificadas son capaces de producir afectaciones a la salud del personal.

Contract W911NF-12-C-0102 (Advanced Diamond Technologies, Inc.)

Science.gov (United States)

2013-06-24

established. Accomplished mostly systematic fibrinogen test on different diamond surfaces. It showed ADT’s UNCD more resistive to fibrinogen than MCD ...doped UNCD both more resistive to thrombosis than MCD . In this phase I project, we studied the biocompatibility of the diamond ribbon surface by...as-dep, H2 Yes Yes G UNCD as-dep No Yes H UNCD as-dep, H2 No Yes I UNCD SiO2 control J UNCD SiO2, H2 control K MCD as-dep L MCD as-dep, H2

Integrating Product and Technology Development

DEFF Research Database (Denmark)

Meijer, Ellen Brilhuis; Pigosso, Daniela Cristina Antelmi; McAloone, Tim C.

2016-01-01

.g. managing dependencies) and opportunities (e.g. streamlining development). This paper presents five existing reference models for technology development (TD), which were identified via a systematic literature review, where their possible integration with product development (PD) reference models......Although dual innovation projects, defined in this article as the concurrent development of products and technologies, often occur in industry, these are only scarcely supported methodologically. Limited research has been done about dual innovation projects and their inherent challenges (e...... was investigated. Based on the specific characteristics desired for dual innovation projects, such as integrated product development and coverage of multiple development stages, a set of selection criteria was employed to select suitable PD and TD reference models. The integration and adaptation of the selected...

AhR-dependent secretion of PDGF-BB by human classically activated macrophages exposed to DEP extracts stimulates lung fibroblast proliferation

Energy Technology Data Exchange (ETDEWEB)

Jaguin, Marie [UMR INSERM U1085, Institut de Recherche sur la Santé, l' Environnement et le Travail (IRSET), Université de Rennes 1, 2 Avenue du Pr Léon Bernard, 35043 Rennes Cedex (France); Fardel, Olivier [UMR INSERM U1085, Institut de Recherche sur la Santé, l' Environnement et le Travail (IRSET), Université de Rennes 1, 2 Avenue du Pr Léon Bernard, 35043 Rennes Cedex (France); Pôle Biologie, Centre Hospitalier Universitaire (CHU) Rennes, 2 rue Henri Le Guilloux, 35033 Rennes Cedex (France); Lecureur, Valérie, E-mail: valerie.lecureur@univ-rennes1.fr [UMR INSERM U1085, Institut de Recherche sur la Santé, l' Environnement et le Travail (IRSET), Université de Rennes 1, 2 Avenue du Pr Léon Bernard, 35043 Rennes Cedex (France)

2015-06-15

Lung diseases are aggravated by exposure to diesel exhaust particles (DEPs) found in air pollution. Macrophages are thought to play a crucial role in lung immune response to these pollutants, even if the mechanisms involved remain incompletely characterized. In the present study, we demonstrated that classically and alternative human macrophages (MΦ) exhibited increased secretion of PDGF-B in response to DEP extract (DEPe). This occurred via aryl hydrocarbon receptor (AhR)-activation because DEPe-induced PDGF-B overexpression was abrogated after AhR expression knock-down by RNA interference, in both M1 and M2 polarizing MΦ. In addition, TCDD and benzo(a)pyrene, two potent AhR ligands, also significantly increased mRNA expression of PDGF-B in M1 MΦ, whereas some weak ligands of AhR did not. We next evaluated the impact of conditioned media (CM) from MΦ culture exposed to DEPe or of recombinant PDGF-B onto lung fibroblast proliferation. The tyrosine kinase inhibitor, AG-1295, prevents phosphorylations of PDGF-Rβ, AKT and ERK1/2 and the proliferation of MRC-5 fibroblasts induced by recombinant PDGF-B and by CM from M1 polarizing MΦ, strongly suggesting that the PDGF-BB secreted by DEPe-exposed MΦ is sufficient to activate the PDGF-Rβ pathway of human lung fibroblasts. In conclusion, we demonstrated that human MΦ, whatever their polarization status, secrete PDGF-B in response to DEPe and that PDGF-B is a target gene of AhR. Therefore, induction of PDGF-B by DEP may participate in the deleterious effects towards human health triggered by such environmental urban contaminants. - Highlights: • PDGF-B expression and secretion are increased by DEPe exposure in human M1 and M2 MΦ. • DEPe-induced PDGF-B expression is aryl-hydrocarbon-dependent. • DEPe-exposed M1 MΦ secrete sufficient PDGF-B to increase lung fibroblast proliferation.

Determinants of import demand for non-renewable energy (petroleum) products: Empirical evidence from Nigeria

International Nuclear Information System (INIS)

Adewuyi, Adeolu O.

2016-01-01

This study estimated determinants of import demand for refined petroleum products in Nigeria for the period 1984–2013. It employed the autoregressive distributed lag (ARDL) bounds test cointegration method and analysed both long-run and short-run determinants of import demand for total and specific petroleum products. In the long-run, aggregate and sectoral incomes are significant determinants of import of refined kerosene. Further, real effective exchange rate (REER), aggregate income (GDP), manufacturing sector's income, domestic energy production (DEP) and population growth rate (PGR) are drivers of import of refined motor spirit Moreover, REER, DEP and manufacturing sector's income are propellers of import of refined distillate fuel. Also, REER and total output of petroleum products are major drivers of total import of refined petroleum products. Short-run results show that previous period GDP, PGR and manufacturing and service sectors' incomes are determinants of import demand for refined kerosene. Moreover, REER, GDP, previous PGR and manufacturing sector's income exert significant effects on the import of refined motor spirit. Further, significant effects of REER, DEP, previous PGR, domestic output of the product and manufacturing and service sectors' incomes on the import demand for distillate fuel were found. Policy implications of the foregoing are articulated in the paper. - Highlights: •Long-run and short-run drivers of import demand for petroleum products were estimated. •kerosene import is income elastic, gasoline import is income and relative price inelastic. •Exchange rate policies may have diverse effects on import of various petroleum product. •Expanding market size has implication for import demand for petroleum product varieties. •Import demand for petroleum products responds differently to various sectoral incomes.

WASTE-FREE PRODUCTION TECHNOLOGY OF DRY MASHED POTATOES

Directory of Open Access Journals (Sweden)

G. V. Kalashnikov

2015-01-01

Full Text Available Summary. According to data on norms of consumption of vegetable production of scientific research institute of Food of the Russian Academy of Medical Science, potatoes win first place with norm of 120 kg a year on the person. In this regard much attention is paid to processing of potatoes that allows to prolong the term of its validity, and also to reduce the capacity of storages and to reduce transport transportations as 1 kg of a dry potatoes produсt is equivalent 7-8 kg of fresh potatoes. Thus industrial processing of potatoes on dry mashed potatoes allows to reduce losses of potatoes at storage and transportation, there is a possibility of enrichment of products vitamins and other useful components, its nutrition value remains better, conditions for complex processing of raw materials with full recycling and creations of stocks of products from potatoes on a crop failure case are created. Dry mashed potatoes are a product of long storage. On the basis of studying of the production technology of mashed potatoes the analysis of technological processes as sources of creation of waste, and the directions of recovery of secondary raw materials for complex waste-free technology of processing of potatoes are defined is provided. The waste-free technological scheme of processing of potatoes and production of dry instant mashed potatoes on the basis of dehydration and moisture thermal treatment a component providing recovery of secondary carbohydrate content raw materials in the form of waste of the main production is developed. The main stages of production of dry instant mashed potatoes are described. It is offered the technological scheme of a production line of mashed potatoes on the basis of waste-free technology. Advantages of the offered waste-free production technology of dry instant mashed potatoes with processing of secondary starch-containing raw materials are given.

IEA Energy Technology Essentials: Biofuel Production

Energy Technology Data Exchange (ETDEWEB)

NONE

2007-01-15

The IEA Energy Technology Essentials series offers concise four-page updates on the different technologies for producing, transporting and using energy. Biofuel Production is the topic covered in this edition.

The Dutch Cannabis Dependence (CanDep) study on the course of frequent cannabis use and dependence: objectives, methods and sample characteristics

NARCIS (Netherlands)

van der Pol, P.; Liebregts, N.; de Graaf, R.; Korf, D.J.; van den Brink, W.; van Laar, M.

2011-01-01

This paper presents an overview of the prospective cohort design of the Dutch Cannabis Dependence (CanDep) study, which investigates (i) the three-year natural course of frequent cannabis use (≥ three days per week in the past 12 months) and cannabis dependence; and (ii) the factors involved in the

Innovative technologies of waste recycling with production of high performance products

International Nuclear Information System (INIS)

Gilmanshin, R; Azimov, Yu I; Gilmanshina, S I; Ferenets, A V; Galeeva, A I

2015-01-01

The innovative ways of recycling wastes as a tool for sustainable development are presented in the article. The technology of the production of a composite material based on the rubber fiber composite waste tire industry is presented. The results of experimental use of the products in the real conditions. The comparative characteristics of the composite material rubber fiber composite are given. The production technology of construction and repairing materials on the basis of foamed glass is presented. (paper)

Innovative technologies of waste recycling with production of high performance products

Science.gov (United States)

Gilmanshin, R.; Ferenets, A. V.; Azimov, Yu I.; Galeeva, A. I.; Gilmanshina, S. I.

2015-06-01

The innovative ways of recycling wastes as a tool for sustainable development are presented in the article. The technology of the production of a composite material based on the rubber fiber composite waste tire industry is presented. The results of experimental use of the products in the real conditions. The comparative characteristics of the composite material rubber fiber composite are given. The production technology of construction and repairing materials on the basis of foamed glass is presented.

ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT: DUST SUPPRESSANT PRODUCTS: SYNTECH PRODUCTS CORPORATION'S PETROTAC

Science.gov (United States)

Dust suppressant products used to control particulate emissions from unpaved roads are among the technologies evaluated by the Air Pollution Control Technology (APCT) Verification Center, part of the U.S. Environmental Protection Agency's Environmental Technology Verification (ET...

ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT: DUST SUPPRESSANT PRODUCTS: SYNTECH PRODUCTS CORPORATION'S TECHSUPPRESS

Science.gov (United States)

Dust suppressant products used to control particulate emissions from unpaved roads are among the technologies evaluated by the Air Pollution Control Technology (APCT) Verification Center, part of the U.S. Environmental Protection Agency's Environmental Technology Verification (ET...

Nano-enabled environmental products and technologies - opportunities and drawbacks

DEFF Research Database (Denmark)

Møller Christensen, Frans; Brinch, Anna; Kjølholt, Jesper

The project aims to investigate the benefits for health and environment that the use of nanomaterials in products and technologies may have. More specifically, the project provides an overview of the most relevant nano-enabled environmental technologies, different types of products and technologies...... on the (Danish) market, as well as products and technologies, which are still in R&D and it will provide a qualitative overview of health and environmental pros and cons of these technologies. The project has focused on technologies applied in: 1) purification of water and wastewater, 2) remediation of soil...

Cleaner production technology for the NDT industry

International Nuclear Information System (INIS)

Relunia, Estrella D.; Mateo, Alejandro J.

2001-01-01

This paper discusses te wastes generated from the conduct of nondestructive testing (NDT) techniques and operations like NDT film processing and the systems to reduce water pollution and the film system quality control. Discussions on clean technology production concepts and philosophy is also discussed. A case study on cleaner production technology where a process and equipment modifications and a product substitution were implemented is presented. The equipment modification and product substitution eliminated the use of 1,1,1-trichloroethane in its cleaning operation. (Author)

Technology adoption and the impact on average productivity

NARCIS (Netherlands)

Hellegers, P.J.G.J.; Zeng, D.; Zilberman, D.

2011-01-01

In this paper, a framework is developed to analyze how the specifications of new technologies and the heterogeneity of micro-units of production affect the input use, the adoption pattern, and the productivity of inputs. It shows that asset-productivity-enhancing (APE) technologies tend to be

Amiloidosis renal hereditaria por depósito de apolipoproteína AI: un reto diagnóstico

Directory of Open Access Journals (Sweden)

Kelly del Rocío Samillán-Sosa

2015-05-01

La amiloidosis por depósito de Apo AI progresa a enfermedad renal crónica terminal en el plazo de de 3 a 15 años. Se diferencia clínicamente de la amiloidosis AL por su menor afectación extrarrenal y su mejor pronóstico. El trasplante renal ofrece una supervivencia del injerto aceptable y el trasplante hepato-renal se podría tener en cuenta en pacientes con disfunción significativa de ambos órganos.

Wood for energy production. Technology - environment - economy

International Nuclear Information System (INIS)

Serup, H.; Falster, H.; Gamborg, C.

1999-01-01

'Wood for Energy Production', 2nd edition, is a readily understood guide to the application of wood in the Danish energy supply. The first edition was named 'Wood Chips for Energy Production'. It describes the wood fuel from forest to consumer and provides a concise introduction to technological, environmental, and financial matters concerning heating systems for farms, institutions, district heating plants, and CHP plants. The individual sections deal with both conventional, well known technology, as well as the most recent technological advances in the field of CHP production. The purpose of this publication is to reach the largest possible audiance, and it is designed so that the layman may find its background information of special relevance. 'Wood for Energy Production' is also available in German and Danish. (au)

Wood for energy production. Technology - environment - economy

Energy Technology Data Exchange (ETDEWEB)

Serup, H.; Falster, H.; Gamborg, C. [and others

1999-10-01

`Wood for Energy Production`, 2nd edition, is a readily understood guide to the application of wood in the Danish energy supply. The first edition was named `Wood Chips for Energy Production`. It describes the wood fuel from forest to consumer and provides a concise introduction to technological, environmental, and financial matters concerning heating systems for farms, institutions, district heating plants, and CHP plants. The individual sections deal with both conventional, well known technology, as well as the most recent technological advances in the field of CHP production. The purpose of this publication is to reach the largest possible audiance, and it is designed so that the layman may find its background information of special relevance. `Wood for Energy Production` is also available in German and Danish. (au)

Avaliação geoestatística do depósito estano-tungstenífero relacionado ao Maciço Granítico Correas-Ribeirão Branco-SP

OpenAIRE

José Maximino Tadeu Miras Ferron

2000-01-01

Esta dissertação apresenta os resultados de um estudo geoestatístico realizado sobre os dados de pesquisa em um depósito estano-tungstenífero relacionado ao Maciço Granítico Correas, localizado no Município de Ribeirão Branco - SP. Este depósito mineral foi intensivamente pesquisado pela Mineração Taboca S.A., em cooperação com o Instituto de Pesquisas Tecnológicas do Est. de São Paulo - IPT. Cerca de 5000 metros de sondagem rotativa a diamante foram realizados resultando na descoberta de sei...

Evaluación preliminar de depósitos de estériles y sedimentos provenientes de la actividad carbonífera en Río Turbio

Directory of Open Access Journals (Sweden)

Alba Lucia Caballero

2014-06-01

Full Text Available A lo largo de décadas de actividad carbonífera en la cuenca de Río Turbio ubicada al sudoeste de la provincia de Santa Cruz en la República Argentina, se ha generado una serie de pasivos ambientales entre los cuales se encuentran los depósitos de material estéril denominados escombreras, las piletas de lodos y los sedimentos del curso de agua receptor de efluentes, el arroyo San José. La presencia de estos pasivos, ha ocasionado en distintas partes del mundo complicaciones debido a la naturaleza ácida de las escorrentías que afectan directamente fuentes de agua, superficiales y subterráneas, localizadas en la vecindad de dichos depósitos. El problema se produce cuando dicha acidez no puede ser neutralizada, lo cual ocasiona la generación de lixiviados de metales pesados en las escombreras o redisolución de los que se encuentran depositados como sedimentos en los cursos superficiales. Por tal motivo en este trabajo se realiza una evaluación preliminar del contenido metálico de los depósitos de estériles y de los sedimentos del arroyo San José y de la capacidad de generación ácida de los primeros. Se pretende con ello obtener una información básica que permita un diseño experimental científico para caracterizar dichos depósitos y evaluar el impacto que están produciendo. Como conclusión se pudo corroborar la hipótesis inicial de existencia de contenido metálico en escombreras y sedimentos y un potencial neto de generación ácida de las primeras. Además se determinó la necesidad de investigar el origen de altos contenidos metálicos en sedimentos de zonas alejadas de la producción.

Technology for production of shelf stable fruit cubes

International Nuclear Information System (INIS)

Mishra, B.B.; Jain, M.P.; Sharma, A.

2009-01-01

A technology has been developed for the production of intermediate moisture fruit cubes using a combination of osmotic dehydration and infrared drying. Fruits like pineapple, papaya, mango, banana and apple can be successfully converted into intermediate moisture products in the form of fruit cubes using this technology. The fruit cubes can blend very well as natural nutritious supplements with breakfast cereals and in certain food preparations like ice creams, milk shakes, jellies and custards. The product is microbiologically safe for consumption and can be stored at ambient storage condition for more than six months. This technology is an effective alternative for post harvest processing and preservation of ripened fruits. Fruit jam is an additional by-product generated by the process. This technology has been transferred to TT and CD, BARC

Problems and Instruments of Product and Technological Diversification of Manufacturing

Directory of Open Access Journals (Sweden)

Kuzmin Oleg Ye.

2015-03-01

Full Text Available The purpose of the article involves identification of objectives and development of instruments for product and technological diversification aimed at updating the range of products and introducing innovative technologies, which will ensure a high level of competitiveness and create preconditions for steady development of the enterprise. As a result of studying the literary sources the objectives and instruments for development of enterprises by means of product and technological diversification have been defined. The article suggests effective instruments of product and technological diversification of manufacturing, namely: the model of expansion of the product range, multi-criteria model of optimization of the product range, a modified model of Kantorovich-Koopmans for implementing new production technologies with set limits on the product output. Further research relate to formation of instruments for manufacturing diversification by means of introducing new types of production.

Status report for the 3D Elevation Program, 2013-2014

Science.gov (United States)

Lukas, Vicki; Eldridge, Diane F.; Jason, Allyson L.; Saghy, David L.; Steigerwald, Pamela R.; Stoker, Jason M.; Sugarbaker, Larry J.; Thunen, Diana R.

2015-09-25

The 3D Elevation Program (3DEP) goal is to acquire, manage, and distribute enhanced three-dimensional elevation data for the Nation and U.S. territories by 2023. This status report covers implementation activities during 2013–2014 to include meeting funding objectives, developing a management structure, modernizing systems, and collecting and producing initial 3DEP data and products. The Nation will not have complete coverage of 3DEP quality data until 2023 assuming that sufficient funding is available. In spite of the overall condition of government budgets, the 3DEP initiative has gained widespread support and had incremental budget success to include supplemental funding resulting from natural disasters. The 3DEP Executive Forum and a wide range of professional organizations are actively working to maintain support for the program. The systems that have been developed to support increasing acquisition and processing levels are largely in place. The first 3DEP quality datasets were released to the public in late 2014. In addition, light detection and ranging (lidar), interferometric synthetic aperture radar (ifsar), and digital elevation models (DEMs) acquired before 2014 are all supported within the new infrastructure and available for download. Research is ongoing to expand the suite of products and services, and to increase overall throughput and data management efficiency. Emerging technologies may result in lower acquisition costs in the future. Elevation data acquired by 3DEP partnerships will be available through The National Map representing one of the largest and most comprehensive databases publicly available for the United States. 

Wood fuel production technologies in EU countries

Energy Technology Data Exchange (ETDEWEB)

Hakkila, P [Finnish Forest Research Institute, Vantaa (Finland)

1998-12-31

The presentation reviews the major technologies used for the production of fuel chips for heating plants in Europe. Three primary options are considered: production of whole-tree chips from young trees for fuel; integrated harvesting of fiber and energy from thinning based on tree-section system; and production of fuel chips from logging residue in clear-cut areas after fully mechanized logging. The characteristics of the available biomass reserve and proven technology for its recovery are discussed. The employment effects of fuel chip production and the costs of wood fuels are also briefly discussed. (author) 3 refs., 3 figs.

Wood fuel production technologies in EU countries

Energy Technology Data Exchange (ETDEWEB)

Hakkila, P. [Finnish Forest Research Institute, Vantaa (Finland)

1997-12-31

The presentation reviews the major technologies used for the production of fuel chips for heating plants in Europe. Three primary options are considered: production of whole-tree chips from young trees for fuel; integrated harvesting of fiber and energy from thinning based on tree-section system; and production of fuel chips from logging residue in clear-cut areas after fully mechanized logging. The characteristics of the available biomass reserve and proven technology for its recovery are discussed. The employment effects of fuel chip production and the costs of wood fuels are also briefly discussed. (author) 3 refs., 3 figs.

Great-Britain at CERN

CERN Multimedia

C. Laignel

2004-01-01

From 23 to 25 November 2004 Administration Building Bldg 60/61 - ground and 1st floor 09.30 - 17.30 Twenty five companies will present their latest technology at the "Great-Britain at CERN" exhibition. British industry will exhibit products and technologies which are related to the field of particle physics. The main subjects are: electrical engineering, electronics, mechanical engineering, vacuum & low temperatures technologies, particles detectors and telecommunications. The exhibition is organised by BEAMA Exhibitions, The British Electrotechnical and Allied Manufacturer's Association There follows : the list of exhibitors. A detailed programme will be available in due course at : your Departemental secretariat, the reception information desk, Building 33, the exhibition. A detailed list of firms is available under the following FI link: http://fi-dep.web.cern.ch/fi-dep/structure/memberstates/exhibitions_visits.htm 1 Accles & Pollock 2 A S Scientific Products Ltd 3 C...

Radiation technology and feed production

International Nuclear Information System (INIS)

Ershov, B.G.

1986-01-01

The use of radiation technology to prepare feeds and feed additions for cattle of non-feed vegetable blends is considered.Physicochemical foundations of radiation-chemical processes, possibilities of the use of various radiation devices are given. Data on practical realization of the technology are presented and prospects of its introduction to solve the tasks put forward by the USSR program on feed production are analyzed

Technical Integration of Nuclear Hydrogen Production Technology

International Nuclear Information System (INIS)

Lee, Ki Young; Chang, J. H.; Park, J. K.

2007-06-01

These works focus on the development of attainment indices for nuclear hydrogen key technologies, the analysis of the hydrogen production process and the performance estimation for hydrogen production system, and the assessment of the nuclear hydrogen production economy. To estimate the attainments of the key technologies in progress with the performance goals of GIF, itemized are the attainment indices based on SRP published in VHTR R and D steering committee of Gen-IV. For assessing the degree of attainments in comparison with the final goals of VHTR technologies in progress of researches, subdivided are the prerequisite items conformed to the NHDD concepts established in a preconceptual design in 2005. The codes for analyzing the hydrogen production economy are developed for calculating the unit production cost of nuclear hydrogen. We developed basic R and D quality management methodology to meet design technology of VHTR's needs. By putting it in practice, we derived some problems and solutions. We distributed R and D QAP and Q and D QAM to each teams and these are in operation. Computer simulations are performed for estimating the thermal efficiency for the electrodialysis component likely to adapting as one of the hydrogen production system in Korea and EED-SI process known as the key components of the hydrogen production systems. Using the commercial codes, the process diagrams and the spread-sheets were produced for the Bunsen reaction process, Sulphuric Acid dissolution process and HI dissolution process, respectively, which are the key components composing of the SI process

Industrial Arts Test Development, Book III. Resource Items for Graphics Technology, Power Technology, Production Technology.

Science.gov (United States)

New York State Education Dept., Albany.

This booklet is designed to assist teachers in developing examinations for classroom use. It is a collection of 955 objective test questions, mostly multiple choice, for industrial arts students in the three areas of graphics technology, power technology, and production technology. Scoring keys are provided. There are no copyright restrictions,…

Integrated Micro Product and Technology Development

DEFF Research Database (Denmark)

Hansen, Hans Nørgaard

2003-01-01

The paper addresses the issues of integrated micro product and technology development. The implications of the decisions in the design phase on the subsequent manufacturing processes are considered vital. A coherent process chain is a necessary prerequisite for the realisation of the industrial...... potential of micro technology....

New technologies in biodiesel production

International Nuclear Information System (INIS)

Santacesaria, E.; Di Serio, M.; Tesser, R.

2009-01-01

The cost of biodiesel is nowadays affected by the cost of the raw materials, because the currently used method of preparation requires highly refined vegetable oils containing very low amounts of free fatty acids and moisture. Alternatively, less expensive technologies are possible using heterogeneous catalysts. In the present paper examples of these new technologies, based on the use of heterogeneous catalysts, in the production of biodiesel are described and discussed. [it

Efecto del V y el Si Sobre la Microestructura de Depósitos Realizados con Electrodos Tubulares Revestidos de Alto Contenido de Mn (Hadfield

Directory of Open Access Journals (Sweden)

Manuel Rodríguez

2017-10-01

Full Text Available Resumen: Las aleaciones para el relleno superficial Fe-Mn-C (Hadfield han demostrado una excelente resistencia al desgaste bajo altas cargas dinámicas. En los últimos años se han realizado numerosos estudios para aumentar la resistencia al desgaste y mejorar su desempeño, a través de la introducción de otros elementos de aleación. En el presente trabajo se investiga la microestructura y dureza de los depósitos de relleno con alto contenido de Mn y adiciones de 1.2% de V y 2.4% de Si. Los depósitos estudiados se realizaron utilizando electrodos tubulares revestidos fabricados a escala de laboratorio. Las fases y microconstituyentes en el metal depositado se identificaron mediante microscopía óptica (MO, electrónica de barrido (MEB, difracción de rayos X (DRX, dureza y microdureza. De acuerdo a los resultados obtenidos, la adición de V al sistema aleante originó que la fase predominante fuera la austenita. Además, contribuyó a la formación de carburos de vanadio (VC en la microestructura de la capa de relleno, sin observarse la presencia de carburos complejos. Por otra parte, la presencia de Si favoreció la formación de una red de ferrita interdendrítica. La adición de estos elementos de aleación mejoró las propiedades de estos depósitos, potencializando su uso en aplicaciones que requieren alta resistencia al desgaste bajo altas cargas.

Prácticas de sacrificio en el Cerro de la Mesa (Alcolea de Tajo, Toledo: el depósito ritual de la Casa 1

Directory of Open Access Journals (Sweden)

Ana CABRERA DÍEZ

2014-06-01

Full Text Available Los depósitos con restos óseos animales enterrados bajo el pavimento en ámbitos domésticos forman parte de prácticas rituales bien conocidas en la Protohistoria peninsular, tradicionalmente asociadas a la fundación o remodelación de nuevos edificios o a ritos vinculados a la propiciación y la fertilidad. Aunque los ejemplos mejor estudiados se encuentran en la zona levantina, el fenómeno también se conoce en yacimientos del interior. Este artículo tiene por objeto presentar un depósito ritual excavado en el poblado vetón del Cerro de la Mesa, en el valle medio del Tajo, cuyas características formales lo emparentan con las ofrendas domésticas de la zona ibérica. Se trata de un hoyo situado en el umbral de la Casa 1, que contiene los restos seleccionados de varios ovinos y un pequeño cuenco cerámico colocado en posición invertida. El análisis de los restos óseos, el contenido del cuenco y el estudio del contexto arqueológico en que se situaba el depósito han permitido relacionarlo con prácticas de sacrificio y libación dentro del marco de la religiosidad vetona. Este trabajo pretende igualmente contribuir a la formación de un corpus peninsular de inhumaciones rituales de animales en contextos domésticos, que impulse el adecuado estudio de la ritualidad protohistórica.

Development of RI Target Production Technology

International Nuclear Information System (INIS)

Jeong, Do Young; Ko, Kwang Hoon; Kim, Cheol Jung; Kim, Taek Soo; Rho, Si Pyo; Park, Hyun Min; Lim, Gwon; Cha, Yong Ho; Han, Jae Min

2010-04-01

This project was accomplished with an aim of productive technical development on the 'enriched target' which is used essentially in radioisotope production. The research was advanced systematically with target production pilot system configuration and core technical development. We composed Yb-176 productive pilot system which equip the chemical purification technique of medical treatment level and proved its capability. Possibilities to separate Zn-67 by the method of using the polarizing light in principle and to separate Zn-70 by the method of using the double optical pumping in theory were also proved. RI target production technologies are recognized excessively with monopolistic techniques of part atomic energy advanced nations such as Russia and US and they are come, but we prepared the opportunity will be able to complete a full cycle of like (RI material production -> RI target production -> RI application) with this project accomplishment. When considering only the direct demand of stable isotope which is used in various industrial, we forecast with the fact that RI target markets will become larger with the approximately 5 billion dollars in 2020 and this technology will contribute in the domestic rising industry creation with high value added

Technology for Salt Production in the Mixteca Alta

Directory of Open Access Journals (Sweden)

Ricardo Antonio León Hernández

2015-01-01

Full Text Available Salt production in the Mixteca Alta is a traditional means of production from prehispanic period, which, despite the economic transformation processes in the colonial period, remained significant features of the traditional process, based on the documented similar models from other productive regions in Mexico. The salt in the novohispanic period was considered a major consumption economic asset due to its use in production processes for the production of new economic products that supported the economy of preindustrial societies (Terán, 2011, p. 71; Williams, 2008. Technology refers to the knowledges for solving human needs arising lifestyle of the cultural groups that develop them. The resources of the natural environment underpin the means of labor that man requires to perform its activities, including economic. The means of production and production processes are technological developments, which involve elements of tangible and intangible order. The study of work processes for salt extraction, are significantly related to the processes of technological evolution that man has developed for the use of natural resources. The economic activities of the primary sector are examples of how humans culturally and economically were inserted in the natural environment (Malpica, 2008, p. 59. This analysis presents a historiographical approach to the study of the processes and the technology required for the extraction of salt in the Mixteca Alta.

Forest Products Industry Technology Roadmap

Energy Technology Data Exchange (ETDEWEB)

none,

2010-04-01

This document describes the forest products industry's research and development priorities. The original technology roadmap published by the industry in 1999 and was most recently updated in April 2010.

Organisational change and the productivity effects of green technology adoption

OpenAIRE

Hottenrott, Hanna; Rexhäuser, Sascha; Veugelers, Reinhilde

2016-01-01

This study investigates induced productivity effects of firms introducing new environmental technologies. The literature on within-firm organisational change and productivity suggests that firms can achieve higher productivity gains from adopting new technologies if they adapt their organisational structures. Such complementarity effects may be of particular importance for the adoption of greenhouse gas (GHG) abatement technologies. The adoption of these technologies is often induced by publi...

Improvement of radioisotope production technology

International Nuclear Information System (INIS)

Li Yongjian

1987-01-01

The widespreading and deepgoing applications of radioisotopes results the increasing demands on both quality and quantity. This in turn stimulating the production technology to be improved unceasingly to meet the different requirements on availability, variety, facility, purity, specific activity and specificity. The major approaches of achieving these improvements including: optimizing mode of production; enhancing irradiation conditions; amelioration target arrangement; adapting nuclear process and inventing chemical processing. (author)

Ozone Enhances Diesel Exhaust Particles (DEP-Induced Interleukin-8 (IL-8 Gene Expression in Human Airway Epithelial Cells through Activation of Nuclear Factors- κB (NF-κB and IL-6 (NF-IL6

Directory of Open Access Journals (Sweden)

James Kelley

2005-12-01

Full Text Available Ozone, a highly reactive oxidant gas is a major component of photochemical smog. As an inhaled toxicant, ozone induces its adverse effects mainly on the lung. Inhalation of particulate matter has been reported to cause airway inflammation in humans and animals. Furthermore, epidemiological evidence has indicated that exposure to particulate matter (PM2.5-10, including diesel exhaust particles (DEP has been correlated with increased acute and chronic respiratory morbidity and exacerbation of asthma. Previously, exposure to ozone or particulate matter and their effect on the lung have been addressed as separate environmental problems. Ozone and particulate matter may be chemically coupled in the ambient air. In the present study we determined whether ozone exposure enhances DEP effect on interleukin-8 (IL-8 gene expression in human airway epithelial cells. We report that ozone exposure (0.5 ppm x 1 hr significantly increased DEP-induced IL-8 gene expression in A549 cells (117 ± 19 pg/ml, n = 6, p < 0.05 as compared to cultures treated with DEP (100 μg/ml x 4 hr alone (31 ± 3 pg/ml, n = 6, or cultures exposed to purified air (24 ± 6 pg/ml, n = 6. The increased DEP-induced IL-8 gene expression following ozone exposure was attributed to ozone-induced increase in the activity of the transcription factors NF-κB and NF-IL6. The results of the present study indicate that ozone exposure enhances the toxicity of DEP in human airway epithelial cells by augmenting IL-8 gene expression, a potent chemoattractant of neutrophils in the lung.

effectiveness of technological options for minimising production risks

African Journals Online (AJOL)

ACSS

preferred technologies in reducing production risk related to climate variability in Eastern Uganda. Data for this study were ..... Set of technological options employed by farmers to reduce climate-induced production risk. Dummy = 1 if farmer. 0.71. 0.46 ..... cation exchange capacity for holding nutrients against leaching loss.

Assessment of material and technical resources of crop production technologies

Directory of Open Access Journals (Sweden)

V. M. Beylis

2017-01-01

Full Text Available The author explains the general principles of influence of the material and technical resources (MTR on performance and efficiency of the main technological operations in crop production. Various technologies from the point of view of MTR expenses were estimated. The general tendencies in development of crop production technologies were revealed. The distribution of costs of materials and equipment to perform a variety of agricultural activities was determined. Cost indicators should be a guide in the search of innovative technological processes and working elements of agricultural machins. The greatest values of expenses of work, fuel, metal, and also, money where found. The concepts allowing to provide costs production reduction were formulated. To achieve the maximum productivity with the minimum expenses, the perspective calculations shoul be based on «progressive» agrotechnologies. When determining progressive agrotechnology it is necessary on reasonable grounds to approach indicators of crop productivity in various agrozones and regions of the country. For an assessment of efficiency of MTR by crop production and ensuring decrease in resource intensity of agricultural products by search and use of essentially new technologies for energy saving when performing agricultural operations, an integrated percentage indicator of comparison of progressive technologies with the applied ones was developed. MTR at application of new progressive crop production technologies by integrated percentage index were estimated. This indicator can be used for definition of efficiency of MTR. Application of the offered technique will promote an effective assessment of MTR, decrease in resource intensity by search and developments of essentially new technologies of performance of operations in crop production.

Development of hydrogen production technology using FBR

International Nuclear Information System (INIS)

Ono, Kiyoshi; Otaki, Akira; Chikazawa, Yoshitaka; Nakagiri, Toshio; Sato, Hiroyuki; Sekine, Takashi; Ooka, Makoto

2004-06-01

This report describes the features of technology, the schedule and the organization for the research and development regarding the hydrogen production technology using FBR thermal energy. Now, the hydrogen production system is proposed as one of new business models for FBR deployment. This system is the production of hydrogen either thermal energy at approximately from 500degC to 550degC or electricity produced by a sodium cooled FBR. Hydrogen is expected to be one of the future clean secondary energies without carbon-dioxide emission. Meanwhile the global energy demand will increase, especially in Asian countries, and the energy supply by fossil fuels is not the best choice considering the green house effect and the stability of energy supply. The development of the hydrogen technology using FBR that satisfies 'sustainable energy development' and 'utilization of energies free from environmental pollution' will be one of the promising options. Based on the above mentioned recognition, we propose the direction of the development, the issues to be solved, the time schedule, the budget, and the organization for R and D of three hydrogen production technologies, the thermochemical hybrid process, the low temperature steam reforming process, and the high temperature steam electrolysis process in JNC. (author)

The develop of technology production in Spain

International Nuclear Information System (INIS)

Fernandez Labastida, J. M.

2007-01-01

Spanish Science and Technology system has been very effective in scientific production but not in technology transfer to economic activities. A cultural change is needed to improve the knowledge transfer mechanisms. Some specific actions are proposed in order to develop useful instruments to achieve a better technology transfer system. (Author)

NEW GREENHOUSE TECHNOLOGIES FOR VEGETABLE PRODUCTION

Directory of Open Access Journals (Sweden)

S. M. Sirota

2016-01-01

Full Text Available First decade of XXI century is characterized by significant augmentation in vegetable world’s production. Average annual vegetable production has been 346 million tons, and it has exceeded the average annual potato production (318 million tons. It has occurred due to the use of up-to-date technologies for vegetable production and, particularly, in greenhouses. In Russian Federation, the total production of vegetables was 5 275.6 thousand tons in 2015 that was 13.3% more than in 2014. But the total vegetable production in greenhouses was only 722.8 thousand tons, that was 0.7% less than in 2014 (728.1 thousand tons. It can be explained that the old technologies have been used for many greenhouses around Russia. Up-to-date technologies for greenhouses are described in the article. Small-volume hydroponics. Plants are grown in mineral wadding, packed up in the special chutes. Mineral nutrition and water are supplied through special pipe with many branch pipes toward each plant. Advantage: pH and nutrition are maintained, consumption of water and mineral nutrition are optimized, and that improves plants grow control. Expenditures of labor decreased, quality of fruit became better and the yield increased significantly by 45-50 kg/m2 comparing with growing on the soil (25-30 kg/m2. Hydroponics with flowing water (salad production lines. Conveyor for salad and vegetable growing on horizontal moving chutes with flowing water and nutrition was developed. Advantage: high level of automation and mechanization of all processes of growing increased the effectiveness of the use of greenhouse areas (we can place 30% plants more at the same area. Seedling production lines. Production lines for seedlings enable to grow vegetables and leafy vegetables on stationary benches, being furnished with periodical nutrition and water supply at times. Advantage: 700 seedlings additionally on each m2 a year. Future technologies are

Environmental control technology in petroleum drilling and production

International Nuclear Information System (INIS)

Wojtanowicz, A.K.

1997-01-01

Environmental control technology (ECT) is process integrated and relates mainly to pollution prevention and risk assessment. Mechanisms of environmental impact in petroleum drilling, well completion and production, include the generation of waste, induction of toxicity or the creation of pathways for pollutant migration. The identification and evaluation of these mechanisms constitute two parts of the scope of ECT. A third part is the development of new techniques to comply with environmental requirements without prejudicing productivity. The basic concepts of the ECT approach are presented in this chapter. The approach is then used to analyse oilfield drilling and production processes. Environmental control components developed in these technologies are described. These include: the control of the volume and toxicity of drilling fluids; source separation technology in produced water cleaning; subsurface injection of oilfield waste slurries; containment technology in the integrity of petroleum wells; subsurface reduction of produced water; oilfield pit closure technology. (37 figures; 26 tables; 227 references) (UK)

Technology and products of gas companies; Gas gaisha no Technology and Products

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-06-10

This paper presents the latest technology and products of gas companies. `Newly developed gas table for one-push automatic fish broiling` of Tokyo Gas Co. `Catalytic technology for decomposing dioxin generated by incinerator to make it harmless` of Osaka Gas Co. `Newly developed strong and kindly shower head` of Tokyo Gas Co. By laying fish on a sensor in a grill and appropriately setting upper and lower heating levers, user can skillfully broil fish only by pushing an ignition button. A temperature sensor attached to the center of a grill catches a change in surface temperature of fish, and automatically sets an appropriate broiling time according to the kind and volume of fish. A finish buzzer and automatic extinction mechanism are prepared. The technology decomposes dioxin in exhaust gas of incinerators to make it harmless. The catalyst is prepared by dispersing noble metal or oxide of several angstroms into activated carbon fibers. The shower head can switch hot water power by a control handle

Fission 99Mo production technology

International Nuclear Information System (INIS)

Miao Zengxing; Luo Zhifu; Ma Huimin; Liang Yufu; Yu Ningwen

2003-01-01

This paper describes a production technology of fission 99 Mo in the Department Isotope, CIAE. The irradiation target is tubular U-Al alloy containing highly enriched uranium. The target is irradiated in the swimming pool reactor core. The neutron flux is about 4x10 13 /cm 2 .sec. The production scale is 3.7-7.4 TBq (100-200Ci) of fission 99 Mo per batch. Total recovery of 99 Mo is more than 70%. The production practice proves that the process and equipment are safe and reliable. (author)

Wood for energy production. Technology - environment - economy[Denmark

Energy Technology Data Exchange (ETDEWEB)

Serup, H.; Falster, H.; Gamborg, C. [and others

1999-07-01

'Wood for Energy Production', 2nd edition, is a readily understood guide to the application of wood in the Danish energy supply. The first edition was named 'Wood Chips for Energy Production'. It describes the wood fuel from forest to consumer and provides a concise introduction to technological, environmental, and financial matters concerning heating systems for farms, institutions, district heating plants, and CHP plants. The individual sections deal with both conventional, well known technology, as well as the most recent technological advances in the field of CHP production. The purpose of this publication is to reach the largest possible audiance, and it is designed so that the layman may find its background information of special relevance. 'Wood for Energy Production' is also available in German and Danish. (au)

Solar driven technologies for hydrogen production

Directory of Open Access Journals (Sweden)

Medojević Milovan M.

2016-01-01

Full Text Available Bearing in mind that the production of hydrogen based on renewable energy sources, without doubt, is an important aspect to be taken into account when considering the potential of this gas, where as particularly interesting technologies stand out the ones which are based on the use of solar energy to produce hydrogen. The goal of this paper provides basic technological trajectories, with the possibility of combining, for solar driven hydrogen production, such as: electrochemical, photochemical and thermochemical process. Furthermore, the paper presents an analysis of those technologies from a technical as well as economic point of view. In addition, the paper aims to draw attention to the fact that the generation of hydrogen using renewable energy should be imposed as a logical and proper way to store solar energy in the form of chemical energy.

United States Superconducting MHD Magnet Technology Development Program

International Nuclear Information System (INIS)

Dawson, A.M.; Marston, P.G.; Thome, R.J.; Iwasa, Y.; Tarrh, J.M.

1981-01-01

A three-faceted program supported by the U.S. Dep of Energy is described. These facets include basic technology development, technology transfer and construction by industry of magnets for the national MHD program. The program includes the maintenance of a large component test facility; investigation of superconductor stability and structural behavior; measurements of materials' properties at low temperatures; structural design optimization; analytical code development; cryogenic systems and power supply design. The technology transfer program is designed to bring results of technology development and design and construction effort to the entire superconducting magnet community. The magnet procurement program is responsible for developing conceptual designs of magnets needed for the national MHD program, for issuing requests for quotation, selecting vendors and supervising design, construction, installation and test of these systems. 9 refs

The role of MAC1 in diesel exhaust particle-induced microglial activation and loss of dopaminergic neuron function.

Science.gov (United States)

Levesque, Shannon; Taetzsch, Thomas; Lull, Melinda E; Johnson, Jo Anne; McGraw, Constance; Block, Michelle L

2013-06-01

Increasing reports support that air pollution causes neuroinflammation and is linked to central nervous system (CNS) disease/damage. Diesel exhaust particles (DEP) are a major component of urban air pollution, which has been linked to microglial activation and Parkinson's disease-like pathology. To begin to address how DEP may exert CNS effects, microglia and neuron-glia cultures were treated with either nanometer-sized DEP (neuron function was assessed. All three treatments showed enhanced ameboid microglia morphology, increased H2 O2 production, and decreased DA uptake. Mechanistic inquiry revealed that the scavenger receptor inhibitor fucoidan blocked DEP internalization in microglia, but failed to alter DEP-induced H2 O2 production in microglia. However, pre-treatment with the MAC1/CD11b inhibitor antibody blocked microglial H2 O2 production in response to DEP. MAC1(-/-) mesencephalic neuron-glia cultures were protected from DEP-induced loss of DA neuron function, as measured by DA uptake. These findings support that DEP may activate microglia through multiple mechanisms, where scavenger receptors regulate internalization of DEP and the MAC1 receptor is mandatory for both DEP-induced microglial H2 O2 production and loss of DA neuron function. © 2013 International Society for Neurochemistry.

Technologies for production of electrticity or heat

International Nuclear Information System (INIS)

Schleisner, L.

1990-03-01

In connection with the production of ''Energi 2000 - Handlingsplan for en baeredygtig udvikling'' (Energy 2000 - Plan of Management for a Sustaniable Development) a summary and evaluation of various electric power and heat production technolgies was produced. Technologies in relation to fusion, wind energy, solar energy, wave energy, heat storage, electric power storage and hydrogen are dealt with. In each case a description of the technological development in the relevant field, also in relation to long (2030), middle (2015) and short term (2000) commercial aspects, is given. The technology is also explained in relation to energy and socio-economical aspects. The consequences of the utilization of the mentioned technologies with regard to the total energy and electric power systems and aspects of Danish industrial policy are considered. Suggestions are presented as to future subjects for research and development in relation to each technology. A number of these technologies are not yet used commercially. The descriptions are thus given on the basis of development on a global basis. (author) 32 tabs., 31 ills., 19 refs

[Technology transfer to the facility for production of medicines].

Science.gov (United States)

Beregovykh, V V; Spitskiĭ, O P

2013-01-01

Innovation development of pharmaceutical industry is close connected to knowledge transfer going to each subsequent life cycle phase of medicinal product. Formal regulation of technology and knowledge transfer is essential for achievement high quality during production of medicines designed during development phase. Conceptual tools, approaches and requirements are considered that are necessary for knowledge and technology transfer across all the life cycle phases of medicines. They are based on scientific knowledge of medicinal products and take into account both international and Russian regulations in the area of development, production and distribution of medicines. Importance of taking into consideration all aspects related to quality of medicines in all steps of technology transfer is shown. An approach is described for technology transfer organization for Russian pharmaceutical manufacturers based on international guides in this area.

Technology diffusion, product differentiation and environmental subsidies

Energy Technology Data Exchange (ETDEWEB)

McGinty, M. [Univ. of Wisconsin, Milwaukee, WI (United States). Dept. of Economics; Vries, F.P. de [Univ. of Groningen (Netherlands). Dept. of Law and Economics

2007-07-01

Technological change is often seen as the promising device that will mitigate or solve environmental problems. Policy intervention that spurs the development, adoption and diffusion of new, environmentally benign technologies therefore holds great appear for environmental authorities. Policymakers have various instruments at their disposal to affect technological diffusion, ranging from direct regulation (command-and-control strategies) to market-based instruments, such as taxes, subsidies and tradable pollution permits. This paper examines environmental subsidies as a technology diffusion policy. The authors apply evolutionary game theory to explore the relationship between subsidies for clean technology, the diffusion of that technology and the degree of product differentiation in an imperfectly competitive market. They show that the subsidy succeeds in reducing environmental damage only when the substitution effect (the reduction in pollution associated with the clean technology) exceeds the output effect (the extent that the subsidy increases output). When the substitution effect does dominate, environmental damage decreases monotonically during the diffusion process. The extent of diffusion (the degree to which clean technolgy replaces dirty) and the likelihood that the substitution effect will dominate both decrease with the extent of product differentiation. Finally, the subsidy for clean technology will spill over to the remaining dirty producers increasing their profit as well.

Decreto 36/1991, de 1 de febrero, por el que se establecen las normas que regulan el funcionamiento del Depósito Legal en Galicia

OpenAIRE

Galicia

1991-01-01

Son objeto de depósito legal todos los escritos, estampas, imágenes y composiciones musicales producidos en Galicia en ejemplares múltiples con fines de difusión, hechos por procedimientos mecánicos, químicos o de cualquier otra naturaleza.

Integrating medical, assistive, and universally designed products and technologies: assistive technology device classification (ATDC).

Science.gov (United States)

Bauer, Stephen; Elsaesser, Linda-Jeanne

2012-09-01

ISO26000:2010 International Guidance Standard on Organizational Social Responsibility requires that effective organizational performance recognize social responsibility, including the rights of persons with disabilities (PWD), engage stakeholders and contribute to sustainable development. Millennium Development Goals 2010 notes that the most vulnerable people require special attention, while the World Report on Disability 2011 identifies improved data collection and removal of barriers to rehabilitation as the means to empower PWD. The Assistive Technology Device Classification (ATDC), Assistive Technology Service Method (ATSM) and Matching Person and Technology models provide an evidence-based, standardized, internationally comparable framework to improve data collection and rehabilitation interventions. The ATDC and ATSM encompass and support universal design (UD) principles, and use the language and concepts of the International Classification of Functioning, Disability and Health (ICF). Use ATDC and ICF concepts to differentiate medical, assistive and UD products and technology; relate technology "types" to markets and costs; and support provision of UD products and technologies as sustainable and socially responsible behavior. Supply-side and demand-side incentives are suggested to foster private sector development and commercialization of UD products and technologies. Health and health-related professionals should be knowledgeable of UD principles and interventions.

Radiation technology of improved quality materials production

International Nuclear Information System (INIS)

Zajkin, Yu.A.; Nadirov, N.K.; Zajkina, R.F.

1997-01-01

The technology of materials production from metals and alloys with high operational properties is developed. The technology is based on use of radiation methods in powder metallurgy. Use of radiation processing allows to improve technological conditions of sintering. It is established, that in certain regimes the sintering temperature is decreasing from 1200 deg C up to 950 deg C in the result of radiation processing of stainless steel powders . According to the processing regimes it is possible load reduction by powder pressing on 15-20 % and sintering time in to 1,5 - 2 times . The radiation methods give possibility to produce high qualitative goods from cheap powder materials without use energy-intensive processes and prolonged processing of finished products

FEATURES OF THE LOGISTICS MANAGEMENT OF PRODUCTION OF HIGH TECHNOLOGY PRODUCTS IN TURBULENCE CHANGING GLOBAL ECONOMY

Directory of Open Access Journals (Sweden)

Oleg M. Tolmachev

2015-01-01

Full Text Available The subject / topic: The level of development of any country is currently determined by the proportion of high technologies in the GDP. Logistics – the basis for efficient management of modern knowledge-intensive production. Given the adverse conditions in the global economy, greatly enhanced the relevance of the study of logistical aspects in the management of high-tech products.Subject of research: The logistics management of production of high technology products in turbulence changing global economy. In this paper we apply scientific methods: the dialectic, comparisons and analogies, analysis and synthesis, deduction and induction, abstract , logical, historical and retrospective. The purpose of this article is to identify the characteristics and problems of logistics management of production of high technology products in the countries of the Customs Union and the Eastern Partnership. Also consider the role of clusters in the formation of innovation infrastructure in the countries of the Customs Union.Results: As part of the presentation was the author of the present article the urgency of application of CALS-technologies as a tool for organization and information support for the creation, production and operation of the product at the enterprises of the national economy.Conclusions / significance: Management of enterprises in the real sector of the economy in modern conditions should be based on synergies methodological principles of market and state regulation, with increased use of methods focused on the long term. By such methods, in particular, should include the methods of logistic management of production of high technology products. The importance of these technologies has increased steadily, and in modern conditions gets a new quality content that refl ects the phased development plan targeted action to ensure that the desired state of the enterprise as a socio-economic system. This in turn points to the need to ensure that new

Pretreatment Technologies of Lignocellulosic Materials in Bioethanol Production Process

Directory of Open Access Journals (Sweden)

Mohamad Rusdi Hidayat

2013-06-01

Full Text Available Bioethanol is one type of biofuel that developed significantly. The utilization of bioethanol is not only limited for fuel, but also could be used as material for various industries such as pharmaceuticals, cosmetics, and food. With wide utilization and relatively simple production technology has made bioethanol as the most favored biofuel currently. The use of lignocellulosic biomass, microalgae, seaweeds, even GMO (Genetically modified organisms as substrates for bioethanol production has been widely tested. Differences in the materials eventually led to change in the production technology used. Pretreatment technology in the bioethanol production using lignocellulosic currently experiencing rapid development. It is a key process and crucial for the whole next steps. Based on the advantages and disadvantages from all methods, steam explotion and liquid hot water methods are the most promising  pretreatment technology available.

Food product tracing technology capabilities and interoperability.

Science.gov (United States)

Bhatt, Tejas; Zhang, Jianrong Janet

2013-12-01

Despite the best efforts of food safety and food defense professionals, contaminated food continues to enter the food supply. It is imperative that contaminated food be removed from the supply chain as quickly as possible to protect public health and stabilize markets. To solve this problem, scores of technology companies purport to have the most effective, economical product tracing system. This study sought to compare and contrast the effectiveness of these systems at analyzing product tracing information to identify the contaminated ingredient and likely source, as well as distribution of the product. It also determined if these systems can work together to better secure the food supply (their interoperability). Institute of Food Technologists (IFT) hypothesized that when technology providers are given a full set of supply-chain data, even for a multi-ingredient product, their systems will generally be able to trace a contaminated product forward and backward through the supply chain. However, when provided with only a portion of supply-chain data, even for a product with a straightforward supply chain, it was expected that interoperability of the systems will be lacking and that there will be difficulty collaborating to identify sources and/or recipients of potentially contaminated product. IFT provided supply-chain data for one complex product to 9 product tracing technology providers, and then compared and contrasted their effectiveness at analyzing product tracing information to identify the contaminated ingredient and likely source, as well as distribution of the product. A vertically integrated foodservice restaurant agreed to work with IFT to secure data from its supply chain for both a multi-ingredient and a simpler product. Potential multi-ingredient products considered included canned tuna, supreme pizza, and beef tacos. IFT ensured that all supply-chain data collected did not include any proprietary information or information that would otherwise

ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT - BAGHOUSE FILTRATION PRODUCTS - TETRATEC PTFE TECHNOLOGIES TETRATEX 8005

Science.gov (United States)

Baghouse filtration products (BFPs) were evaluated by the Air Pollution Control Technology (APCT) pilot of the Environmental Technology Verification (ETV) Program. The performance factor verified was the mean outlet particle concentration for the filter fabric as a function of th...

Technology of pastry products for healthy nutrition purposes

Directory of Open Access Journals (Sweden)

Zavadynska Olena

2016-04-01

Full Text Available The article considers the possibility of using the carrot puree and oil from pumpkin seeds in the preparation of pastry product. Production technology and regulatory documentation for pastry products were developed and nutritional value of products was investigated.

Effectiveness of technological options for minimising production ...

African Journals Online (AJOL)

Farmer perceptions of technology effectiveness, to some extent, agreed with econometric evidence from this study. Study results have two implications: firstly, the need to develop and disseminate location specific adaptation technologies to reduce production risks, instead of blanket recommendations of similar adaptation ...

Buildings R&D Breakthroughs. Technologies and Products Supported by the Building Technologies Program

Energy Technology Data Exchange (ETDEWEB)

none,

2012-04-01

This report identifies and characterizes commercially available products and emerging (near-commercial) technologies that benefited from the support of the Building Technologies Program (BTP) within the U.S. Department of Energy’s Office of Energy Efficiency and Renewable Energy. The investigation specifically focused on technology-oriented research and development (R&D) projects sponsored by BTP’s Emerging Technologies subprogram from 2005-2009.

Critical analysis of emerging forest biorefinery (FBR) technologies for ethanol production

International Nuclear Information System (INIS)

Cohen, J.; Janssen, M.; Chambost, V.; Stuart, P.

2010-01-01

This article provided a literature review of emerging technologies for ethanol production in Canada. A multi-criteria decision making (MCDM) panel was used to weigh critical metrics for evaluating the potential of emerging forest biorefinery technologies for bio-ethanol production. The 3-step methodology identified key factors for evaluating technology pathways. Key factors were applied to a group of selected technologies in order to collect data. All previous criteria were weighted through the MCDM panel in order to rank the technologies, which included biochemical pathway and thermochemical pathway production processes. Criteria included return on investment; feedstock flexibility; technology risk; energy and integration; products and revenue diversification; potential for additional products; and potential environmental impact. The study showed that techno-economic criteria are the most important barriers to the implementation of ethanol biorefineries. While thermochemical processes are economically feasible and provide greater flexibility, biochemical refining processes may provide for the development of other value-added products. 21 refs., 3 tabs., 7 figs.

Critical analysis of emerging forest biorefinery (FBR) technologies for ethanol production

Energy Technology Data Exchange (ETDEWEB)

Cohen, J.; Janssen, M.; Chambost, V.; Stuart, P. [Ecole Polytechnique, Montreal, PQ (Canada). Dept. de Genie Chimique. Design Engineering Chair in Process Integration

2010-05-15

This article provided a literature review of emerging technologies for ethanol production in Canada. A multi-criteria decision making (MCDM) panel was used to weigh critical metrics for evaluating the potential of emerging forest biorefinery technologies for bio-ethanol production. The 3-step methodology identified key factors for evaluating technology pathways. Key factors were applied to a group of selected technologies in order to collect data. All previous criteria were weighted through the MCDM panel in order to rank the technologies, which included biochemical pathway and thermochemical pathway production processes. Criteria included return on investment; feedstock flexibility; technology risk; energy and integration; products and revenue diversification; potential for additional products; and potential environmental impact. The study showed that techno-economic criteria are the most important barriers to the implementation of ethanol biorefineries. While thermochemical processes are economically feasible and provide greater flexibility, biochemical refining processes may provide for the development of other value-added products. 21 refs., 3 tabs., 7 figs.

Depósito elevado de hormigón armado, Argentina

Directory of Open Access Journals (Sweden)

Editorial, Equipo

1965-03-01

Full Text Available The firm S. A. D. E., near Buenos Aires (Argentina, has built an elevated tank, with a capacity of 80 m3, at 21 m height, to supply water to its large industrial installations. The tank is of reinforced concrete. It is shaped as a circular, rather shallow cup, which is subdivided into four compartments, connected in symmetrical pairs with respect to the central axis. This ensures a weight balance when it is filled and emptied. This tank is of interest because of its method of construction, and the prefabrication procedure adopted. The supporting stem is a hollow cylinder, made of prefabricated sections, each 1.60 m long. At the bottom there is a circular slab, which rests on four cylindrical concrete, prefabricated piles, each 15 m long. The system of control valves is placed below the slab. Ascent to the top part is by means of a spiral staircase, whose steps are attached to the stem. To increase its stability, six metal rods, 7.5 cm in diameter, have been added to the cylindrical stem, and the handrail for the steps has been conveniently attached to these. The side thrusts due to wind forces acting on the tank are withstood by means of six radial beams, 5 m in length.Para abastecer de agua a un gran conjunto industrial que construye la Empresa S. A. D. E. cerca de Buenos Aires (Argentina, se ha construido un depósito elevado, de 80 m3 de capacidad y 21 m de altura. La cubeta, de hormigón armado, tiene la forma de una copa aplanada de planta circular y se ha subdividido en cuatro compartimientos comunicados dos a dos, simétricos respecto al eje vertical, con objeto de conservar el equilibrio de cargas durante las operaciones de carga y vaciado. La particularidad de este depósito consiste en su método constructivo y en los procedimientos de prefabricación empleados. El fuste o soporte único central es un cilindro hueco, formado por trozos prefabricados, de 1,60 m de longitud. El de base se apoya sobre una losa circular —que descansa

Application of ESL (Extended Shelf Life) Technology in Drinking Milk Production

OpenAIRE

ÜNVER, Naciye; ÇELİK, Şerafettin

2017-01-01

Nowadays pasteurization andUHT are the best known and most commonly used technologies in milk production.While products which have shorter shelf life and fresh taste are obtained byusing pasteurization, products which have longer shelf life but less desirabletaste are obtained by UHT technology. ESL technology is a new method which wasdeveloped to obtain a longer shelf life product than pasteurized milk andbetter sensory quality product than UHT milk. ESL milk includes technologiessuch as mic...

The role of technological innovation in creating radically new product meanings

DEFF Research Database (Denmark)

Krabbe, Anders Dahl

2015-01-01

This paper explores the concept of technological epiphanies from the literature on design driven innovation. A technological epiphany is defined as a product innovation that can be considered radical, both in terms of technology as well as the meaning and experiences it creates through its design....... Three cases of technological epiphanies from the hearing aid industry are analyzed and discussed in terms of how they represent a radical innovation in technology as well as in product meaning and which role the technological aspect has played in the radical innovation of the meaning of the product....... Three different ways in which technology can function as an enabler for the innovation of product meanings are explored and a fourth is found is found during the analysis. The paper concludes by suggesting directions for future research....

The Kimberley Assessment of Depression of Older Indigenous Australians: Prevalence of Depressive Disorders, Risk Factors and Validation of the KICA-dep Scale

Science.gov (United States)

Almeida, Osvaldo P.; Flicker, Leon; Fenner, Stephen; Smith, Kate; Hyde, Zoe; Atkinson, David; Skeaf, Linda; Malay, Roslyn; LoGiudice, Dina

2014-01-01

Objective This study aimed to develop a culturally acceptable and valid scale to assess depressive symptoms in older Indigenous Australians, to determine the prevalence of depressive disorders in the older Kimberley community, and to investigate the sociodemographic, lifestyle and clinical factors associated with depression in this population. Methods Cross-sectional survey of adults aged 45 years or over from six remote Indigenous communities in the Kimberley and 30% of those living in Derby, Western Australia. The 11 linguistic and culturally sensitive items of the Kimberley Indigenous Cognitive Assessment of Depression (KICA-dep) scale were derived from the signs and symptoms required to establish the diagnosis of a depressive episode according to the DSM-IV-TR and ICD-10 criteria, and their frequency was rated on a 4-point scale ranging from ‘never’ to ‘all the time’ (range of scores: 0 to 33). The diagnosis of depressive disorder was established after a face-to-face assessment with a consultant psychiatrist. Other measures included sociodemographic and lifestyle factors, and clinical history. Results The study included 250 participants aged 46 to 89 years (mean±SD = 60.9±10.7), of whom 143 (57.2%) were women. The internal reliability of the KICA-dep was 0.88 and the cut-point 7/8 (non-case/case) was associated with 78% sensitivity and 82% specificity for the diagnosis of a depressive disorder. The point-prevalence of a depressive disorder in this population was 7.7%; 4.0% for men and 10.4% for women. Heart problems were associated with increased odds of depression (odds ratio = 3.3, 95% confidence interval = 1.2,8.8). Conclusions The KICA-dep has robust psychometric properties and can be used with confidence as a screening tool for depression among older Indigenous Australians. Depressive disorders are common in this population, possibly because of increased stressors and health morbidities. PMID:24740098

The Kimberley assessment of depression of older Indigenous Australians: prevalence of depressive disorders, risk factors and validation of the KICA-dep scale.

Directory of Open Access Journals (Sweden)

Osvaldo P Almeida

Full Text Available OBJECTIVE: This study aimed to develop a culturally acceptable and valid scale to assess depressive symptoms in older Indigenous Australians, to determine the prevalence of depressive disorders in the older Kimberley community, and to investigate the sociodemographic, lifestyle and clinical factors associated with depression in this population. METHODS: Cross-sectional survey of adults aged 45 years or over from six remote Indigenous communities in the Kimberley and 30% of those living in Derby, Western Australia. The 11 linguistic and culturally sensitive items of the Kimberley Indigenous Cognitive Assessment of Depression (KICA-dep scale were derived from the signs and symptoms required to establish the diagnosis of a depressive episode according to the DSM-IV-TR and ICD-10 criteria, and their frequency was rated on a 4-point scale ranging from 'never' to 'all the time' (range of scores: 0 to 33. The diagnosis of depressive disorder was established after a face-to-face assessment with a consultant psychiatrist. Other measures included sociodemographic and lifestyle factors, and clinical history. RESULTS: The study included 250 participants aged 46 to 89 years (mean±SD = 60.9±10.7, of whom 143 (57.2% were women. The internal reliability of the KICA-dep was 0.88 and the cut-point 7/8 (non-case/case was associated with 78% sensitivity and 82% specificity for the diagnosis of a depressive disorder. The point-prevalence of a depressive disorder in this population was 7.7%; 4.0% for men and 10.4% for women. Heart problems were associated with increased odds of depression (odds ratio = 3.3, 95% confidence interval = 1.2,8.8. CONCLUSIONS: The KICA-dep has robust psychometric properties and can be used with confidence as a screening tool for depression among older Indigenous Australians. Depressive disorders are common in this population, possibly because of increased stressors and health morbidities.

Research on Digital Product Modeling Key Technologies of Digital Manufacturing

Institute of Scientific and Technical Information of China (English)

DING Guoping; ZHOU Zude; HU Yefa; ZHAO Liang

2006-01-01

With the globalization and diversification of the market and the rapid development of Information Technology (IT) and Artificial Intelligence (AI), the digital revolution of manufacturing is coming. One of the key technologies in digital manufacturing is product digital modeling. This paper firstly analyzes the information and features of the product digital model during each stage in the product whole lifecycle, then researches on the three critical technologies of digital modeling in digital manufacturing-product modeling, standard for the exchange of product model data and digital product data management. And the potential signification of the product digital model during the process of digital manufacturing is concluded-product digital model integrates primary features of each stage during the product whole lifecycle based on graphic features, applies STEP as data exchange mechanism, and establishes PDM system to manage the large amount, complicated and dynamic product data to implement the product digital model data exchange, sharing and integration.

University of Maine Integrated Forest Product Refinery (IFPR) Technology Research

Energy Technology Data Exchange (ETDEWEB)

Pendse, Hemant P.

2010-11-23

This project supported research on science and technology that forms a basis for integrated forest product refinery for co-production of chemicals, fuels and materials using existing forest products industry infrastructure. Clear systems view of an Integrated Forest Product Refinery (IFPR) allowed development of a compelling business case for a small scale technology demonstration in Old Town ME for co-production of biofuels using cellulosic sugars along with pulp for the new owners of the facility resulting in an active project on Integrated Bio-Refinery (IBR) at the Old Town Fuel & Fiber. Work on production of advanced materials from woody biomass has led to active projects in bioplastics and carbon nanofibers. A lease for 40,000 sq. ft. high-bay space has been obtained to establish a Technology Research Center for IFPR technology validation on industrially relevant scale. UMaine forest bioproducts research initiative that began in April 2006 has led to establishment of a formal research institute beginning in March 2010.

Facies volcánicas del depósito de avalancha de detritos del volcán Tata Sabaya, Andes Centrales Volcanic facies of the debris avalanche deposit of Tata Sabaya Volcano, Central Andes

Directory of Open Access Journals (Sweden)

Benigno Godoy

2012-09-01

Full Text Available Las avalanchas de detritos, asociadas a colapsos parciales de edificios volcánicos, son fenómenos comunes en la evolución de un volcán. Este tipo de flujos son por inestabilidades, que pueden deberse a factores tales como la existencia de zonas afectadas por alteración hidrotermal, cambios climáticos, terremotos, intrusión de magmas en zonas superficiales (criptodomos y/o diques y/o movimiento de fallas bajo el edificio volcánico o cercanas a él. El producto final de estos flujos -denominado depósito de avalancha de detritos (DAD- presenta morfologías típicas de cerrillos y drenajes cerrados. En los Andes Centrales se han reconocido, al menos, 14 centros volcánicos con depósitos de avalancha asociados, entre los que está el volcán Tata Sabaya (Bolivia. El colapso que ha dado origen a este depósito podría haberse generado por una combinación de actividad sísmica y magmática en el volcán. El depósito asociado al colapso parcial de este volcán se distribuye sobre la parte baja del flanco sur del volcán y sobre la parte noroccidental de la cuenca del salar de Coipasa. Cubre una superficie de más de 230 km² y tiene un volumen estimado de 6±1 km³. Sobre la base de las composiciones litológicas, se ha establecido que el depósito está constituido por 6 tipos distintos de cerrillos, los cuales son: lávicos, piroclásticos, sedimentarios mixtos, brecha piroclástica y andesítico-basálticos. Considerando el tipo predominante de cerrillos y su distribución espacial dentro del depósito, se ha definido 6 facies diferentes (Facies de Bloques Toreva, Facies de Cerrillos Volcánicos, Facies Central, Facies de Cerrillos Sedimentarios, Facies Mixta y Facies de Cerrillos de Brecha Piroclástica. Tomando en cuenta la distribución espacial de estas facies, se propone la estructura del paleovolcán previa a su colapso parcial.Debris avalanches associated with partial sector collapse of volcanic edifices are common phenomena in the

Great Britain at CERN

CERN Multimedia

2006-01-01

From 14 to 16 November 2006 Administration Building, Bldg. 60/61 - ground and 1st floor 09.30 - 17.30 Fifteen companies will present their latest technologies at the 'Great Britain at CERN' exhibition. British industry will exhibit products and technologies related to the field of particle physics. The main fields represented will be computing technologies, electrical engineering, electronics, mechanical engineering, vacuum & low temperature technologies and particle detectors. The exhibition is organised by BEAMA Exhibitions (the British Electrotechnical and Allied Manufacturers Association). Below you will find: a list of the exhibitors. A detailed programme will be available in due course: from your Departmental secretariat, from the Reception information desk, Building 33, at the exhibition itself. A detailed list of the companies is available at the following FI link: http://fi-dep.web.cern.ch/fi-dep/structure/memberstates/exhibitions_visits.htm LIST OF EXHIBITORS 3D Metrics Almat...

Great Britain at CERN

CERN Multimedia

2006-01-01

From 14 to 16 November 2006 Administration Building, Bldg. 60/61 - ground and 1st floor 09.30 - 17.30 Fifteen companies will present their latest technologies at the 'Great Britain at CERN' exhibition. British industry will exhibit products and technologies related to the field of particle physics. The main fields represented will be computing technologies, electrical engineering, electronics, mechanical engineering, vacuum & low temperature technologies and particle detectors. The exhibition is organised by BEAMA Exhibitions (the British Electrotechnical and Allied Manufacturers Association). Below you will find: a list of the exhibitors. A detailed programme will be available in due course: from your Departmental secretariat, from the Reception information desk, Building 33, at the exhibition itself. A detailed list of the companies is available at the following FI link: http://fi-dep.web.cern.ch/fi-dep/structure/memberstates/exhibitions_visits.htm LIST OF EXHIBITORS 3D Metrics Alma...

Integrative Production Technology for High-Wage Countries

CERN Document Server

2012-01-01

Industrial production in high-wage countries like Germany is still at risk. Yet, there are many counter-examples in which producing companies dominate their competitors by not only compensating for their specific disadvantages in terms of factor costs (e.g. wages, energy, duties and taxes) but rather by minimising waste using synchronising integrativity as well as by obtaining superior adaptivity on alternating conditions. In order to respond to the issue of economic sustainability of industrial production in high-wage countries, the leading production engineering and material research scientists of RWTH Aachen University together with renowned companies have established the Cluster of Excellence “Integrative Production Technology for High-Wage Countries”. This compendium comprises the cluster’s scientific results as well as a selection of business and technology cases, in which these results have been successfully implemented into industrial practice in close cooperation with more than 30 companies of ...

Buildings R&D Breakthroughs: Technologies and Products Supported by the Building Technologies Program

Energy Technology Data Exchange (ETDEWEB)

Weakley, Steven A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

2012-04-01

The purpose of the project described in this report is to identify and characterize commercially available products and emerging (near-commercial) technologies that benefited from the support of the Building Technologies Program (BTP) within the U.S. Department of Energy’s Office of Energy Efficiency and Renewable Energy. The investigation specifically focused on technology-oriented research and development (R&D) projects funded by BTP’s Emerging Technologies subprogram from 2005-2011.

PRODUCTION OF PROTOTYPE PARTS USING DIRECT METAL LASER SINTERING TECHNOLOGY

Directory of Open Access Journals (Sweden)

Josef Sedlak

2015-08-01

Full Text Available Unconventional methods of modern materials preparation include additive technologies which involve the sintering of powders of different chemical composition, granularity, physical, chemical and other utility properties. The technology called Rapid Prototyping, which uses different technological principles of producing components, belongs to this type of material preparation. The Rapid Prototyping technology facilities use photopolymers, thermoplastics, specially treated paper or metal powders. The advantage is the direct production of metal parts from input data and the fact that there is no need for the production of special tools (moulds, press tools, etc.. Unused powder from sintering technologies is re-used for production 98% of the time, which means that the process is economical, as well as ecological.The present paper discusses the technology of Direct Metal Laser Sintering (DMLS, which falls into the group of additive technologies of Rapid Prototyping (RP. The major objective is a detailed description of DMLS, pointing out the benefits it offers and its application in practice. The practical part describes the production and provides an economic comparison of several prototype parts that were designed for testing in the automotive industry.

Local power production at the end consumer - appropriate technologies

International Nuclear Information System (INIS)

Grinden, Bjoern; Morch, Andrei Z.; Braanaas, Marit; Stang, Jacob; Berner, Monica

2002-11-01

The report describes and evaluates a selection of technologies which may be adequate for a local power production at the end consumer. Contrary to may other technology surveys it is focused on small-scale production units that also may be of interest to small consumers. For the various technologies the particular technology is described and an evaluation of the suitability to Norwegian conditions is carried out. For each technology the following is described: 1) The technology in general. 2) Construction and technology trends. 3) Environmental conditions, operation and maintenance. 4) Experiences. 5) Key facts/data. It has to be emphasised that all the technologies are in development and this report describes them as they are in 2002 except for general conditions which always will exist. It has not been possible to obtain exact facts regarding the investment costs and the costs for each produced kWh e lectricity or kWh h eat for many of the technologies because they are new and mass production has not yet started. In an appendix a form is presented for use in obtaining information from equipment suppliers. Later in the project there will be developed a model for calculating the profitability of such investments as well. Technologies such as small-scale wind and hydropower units are the technologies most suited for Norway in a short perspective. In the years to come it is probable that technologies which use biologic fuel/waste of some kind would be used to some extent. In a longer perspective technologies as the Stirling engine and fuel cells may be of interest. The micro gas turbines and combustion engines may be current technologies if the distribution network for natural gas is developed. For these technologies the utilisation of waste heat would approximately double the efficiency and halve the operation costs. Various external conditions will play a major part in the spreading of the local power production. The political, legal and economical external

Technology and economic assessment of lactic acid production and uses

Energy Technology Data Exchange (ETDEWEB)

Datta, R.; Tsai, S.P.

1996-03-01

Lactic acid has been an intermediate-volume specialty chemical (world production {approximately}50,000 tons/yr) used in a wide range of food-processing and industrial applications. Potentially, it can become a very large-volume, commodity-chemical intermediate produced from carbohydrates for feedstocks of biodegradable polymers, oxygenated chemicals, environmentally friendly ``green`` solvents, and other intermediates. In the past, efficient and economical technologies for the recovery and purification of lactic acid from fermentation broths and its conversion to the chemical or polymer intermediates had been the key technology impediments and main process cost centers. Development and deployment of novel separations technologies, such as electrodialysis with bipolar membranes, extractive and catalytic distillations, and chemical conversion, can enable low-cost production with continuous processes in large-scale operations. The emerging technologies can use environmentally sound lactic acid processes to produce environmentally useful products, with attractive process economics. These technology advances and recent product and process commercialization strategies are reviewed and assessed.

New Trend on Halva Production: Dietetic Halva and Nougat. Production Technology and Compositions

Directory of Open Access Journals (Sweden)

Emil Racolta

2013-11-01

Full Text Available In the last years sugar free confectionery market had grown steadily. This types of products are primarily addressed to diabetics and dieters, but the main driving factor of their growth is the increase of the obese population who raised concern about their health. Halva is known as a high caloric product with its nutritional energy higher than 500 kcal/100g, the demand of a sugar free version for this confectionery products group being those a current need. This work aimed to develop new products – dietetic halva and nougat, their production technology and compositions being in detail described. A new trend on halva production was established by developing a dietetic halva and nougat. The problem which is solved by the current work is to assure a proper technology in order to obtain a dietetic halva similar in taste and texture with the conventional one.

Product Lifecycle Management Centre of Technology

CSIR Research Space (South Africa)

Barnard, Rentia

2017-10-01

Full Text Available - Rentia Barnard.pdf.txt Content-Type text/plain; charset=UTF-8 1 Interactive activities Contents Product Lifecycle Management Centre of Technology Rentia Barnard National Industrialisation Support Initiative (NISI) 3 Initiative (NISI...

The power of design product innovation in sustainable energy technologies

CERN Document Server

Reinders, Angele H; Brezet, Han

2012-01-01

The Power of Design offers an introduction and a practical guide to product innovation, integrating the key topics that are necessary for the design of sustainable and energy-efficient products using sustainable energy technologies. Product innovation in sustainable energy technologies is an interdisciplinary field. In response to its growing importance and the need for an integrated view on the development of solutions, this text addresses the functional principles of various energy technologies next to the latest design processes and innovation methods. From the perspec

MODERN TECHNOLOGY OF FERMENTED MEAT PRODUCTS

Directory of Open Access Journals (Sweden)

L. V. Antipova

2015-01-01

Full Text Available Summary. New trends of meat industry development, on the example of sausages are shown. The detailed description of indicators of quality of meat raw materials, auxiliary materials and their influence on the processes of tissue and microbial fermentation in the process of ripening raw sausages. Measures for improving the quality control of meat raw materials, auxiliary materials, as well as the processing conditions in all stages of production of smoked products are suggested. The modern technology of production of raw sausages with starter cultures and complex products, allowing better standardization process is considered. Questions of chemistry of color formation, the formation of taste and flavor, textures and the suppression of undesired microflora in foods in general, and in particular the raw sausage are thoroughly covered. Ideas about factors affecting the formation of color in sausages are given. It is pointed out that the susceptibility to oxidation of nitrosilmioglobin is directly related to the fat oxidation in the whole redox potential. Trends in the market of raw sausages are shown. Requirements used in the meat industry to starting cultures are shown. Recommendations on the rational use of starter cultures, and other functional additives in technology of uncooked fermented products, which are used to improve the quality and ensure a high level of product safety are given. The characteristic of the innovative series of starter cultures Protect, its species belonging and qualitative composition, providing a unique protection system in the process of ripening and storage of smoked products is given. The properties are proved on the example of smoked poultry sausage.

Productivity effects of technology diffusion induced by an energy tax

International Nuclear Information System (INIS)

Walz, R.

1999-01-01

In the political discussion, the economy-wide effects of an energy tax have gained considerable attention. So far, macroeconomic analyses have focused on either (positive or negative) costs triggered by an energy tax, or on the efficiency gains resulting from new energy taxes combined with lower distortionary taxes. By contrast, the innovative effects of climate protection measures have not yet been thoroughly analysed. This paper explores the productivity effects of a 50 per cent energy tax in the German industry sector employing a technology-based, three-step bottom-up approach. In the first step, the extensive IKARUS database is used to identify the technological adjustments arising from an energy tax. In the second step, the technologies are classified into different clusters. In the third step, the productivity effects generated by the technological adjustments are examined. The results imply that an energy tax induces mainly sector-specific and process-integrated technologies rather than add-on and cross-cutting technologies. Further, it is shown that the energy-saving technologies tend to increase productivity. This is particularly the case for process-integrated, sector specific technologies. (author)

Production System of Peranakan Etawah Goat under Application of Feed Technology: Productivity and Economic Efficiency

Directory of Open Access Journals (Sweden)

Akhmad Sodiq

2009-09-01

Full Text Available Feed resources are the major constraint in increasing goat production in the village. The main constraints to goat raising are related to feeds (i the high cost of transport of crop residues and grass to the homesteads, (ii the low nutritive value of feeds used, particularly in the dry period. This research was design to evaluate goat productivity and economic efficiency of goat farming under application of feed technology production system in Peranakan Etawah goat farmer group of Gumelar Banyumas Central Java. All farmers were taken as respondents using census methods. On farm research with participative focused group discussion, indepth interview, and farm observation. Descriptive analysis and independent t test methods were used to analyze the data. Results of this study showed that there was a significant improvement goat productivity on production system with the application of feed technology. Body weight at weaning, survival rate till weaning, and doe productivity were increased 7%, 2% and 5%, respectively. There was no evidence of significant different of farmers income and economic efficiency before and after the applied feed technology (P>0.05. The calculation was based on cash flow. Before application, farmers income per year and economic efficiency were Rp14.404.520,00 and 1.21, then insignificantly improve into Rp16.487.100,00 and 1.27, respectively. (Animal Production 11(3: 202-208 (2009 Key Words: Livestock production system, Peranakan Etawah goat, feed technology aplication, productivity and economic efficiency

Tecnología de herramientas rotativas durante el Bronce Final Atlántico. El depósito de Villena

Directory of Open Access Journals (Sweden)

Armbruster, Barbara R.

1994-12-01

Full Text Available The analysis of the Villena goldhoard bracelets is the starting point for a team research which has showed the existence of a technological stage which was more developed than we thought for the Atlantic Bronze Age in the Iberian Peninsula. The use of a complex lost wax casting gold technique and the existence of a horizontal rotary axis lathe are demonstrated. Finally we put forward an explanation for this important hoard and we stablish a chronological frame work framework for a series of gold finds coming from the southwest of the Iberian Peninsula.

El estudio de los brazaletes del tesoro de Villena es el punto de partida de una investigación en equipo que ha tenido como resultado la constatación de un estadio tecnológico más avanzado del que hasta ahora se pensaba para la metalurgia del Bronce Atlántico en la Península Ibérica. Se demuestra la práctica de una sofisticada técnica de fundición a la cera perdida en oro y la existencia del torno de eje horizontal. Finalmente planteamos un modelo interpretativo para este importante depósito y situamos en un marco de cronología relativa toda una serie de hallazgos de orfebrería del suroeste peninsular que hasta la fecha se encontraban descontextualizados.

Modelling architectures in multi-product oriented technology development

DEFF Research Database (Denmark)

Guðlaugsson, Tómas Vignir

are not completely defined. Yet, decisions need to be made during technology development on the capabilities to be provided through the development to fulfil future application requirements,provide a foundation for future products, and development of a production system capable of producing future products...

The role of diesel exhaust particles and their associated polyaromatic hydrocarbons in the induction of allergic airway disease

International Nuclear Information System (INIS)

Diaz-Sanchez, D.

1997-01-01

The increase in allergic airway disease has paralleled the increase in the use of fossil fuels. Studies were undertaken to examine whether extracts of polyaromatic hydrocarbons (PAH) from diesel exhaust particles (DEP) (PAH-DEP) acted as mucosal adjuvants to help initiate or enhance immunoglobulin E (IgE) production in response to common inhaled allergens. In vitro studies demonstrated that PAH-DEP enhanced IgE production by tonsilar B-cells in the presence of interleukin-4 (IL-4) and CD40 monoclonal antibody, and altered the nature of the IgE produced, i.e. a decrease in the CH4'-CHe5 variant, a marker for differentiation of IgE-producing B-cells, and an increase in the M2' variant. In vivo nasal provocation studies using 0.30 mg DEP in saline also showed enhanced IgE production in the human upper respiratory mucosa, accompanied by a reduced CH4'-CHe5 mRNA splice variant. The effect of DEP were also isotype-specific, with no effect on IgG, IgA, IgM, or albumin, but it produced a small increase in the IgG 4 subclass. The ability of DEP to act as an adjuvant to the ragweed allergen Amb a I was examined by nasal provocation in ragweed allergic subjects using 0.3 mg DEP, Amb a I, or both. Although allergen and DEP each enhanced ragweed-specific IgE, DEP plus allergen promoted a 16-times greater antigen-specific IgE production. Nasal challenge with DEP also influenced cytokine production. Ragweed challenge resulted in a weak response, DEP challenge caused a strong but non-specific response, while allergen plus DEP caused a significant increase in the expression of mRNA for TH 0 and TH 2 -type cytokines (IL-4, IL-5, IL-6, IL-10, IL-13) with a pronounced inhibitory effect on IFN-γ gene expression. These studies suggest that DEP can enhance B-cell differentiation, and by initiating and elevating IgE production, may play an important role in the increased incidence of allergic airway disease. (au)

Evaluation of the efficiency of alternative enzyme production technologies

DEFF Research Database (Denmark)

Albæk, Mads Orla

Enzymes are used in an increasing number of industries. The application of enzymes is extending into the production of lignocellulosic ethanol in processes that economically can compete with fossil fuels. Since lignocellulosic ethanol is based on renewable resources it will have a positive impact...... production of cellulases and hemi-cellulases. The aim of the thesiswas to use modeling tools to identify alternative technologies that have higher energy or raw material efficiency than the current technology. The enzyme production by T. reesei was conducted as an aerobic fed-batch fermentation. The process...... of the uncertainty and sensitivity of the model indicated the biological parameters to be responsible for most of the model uncertainty. A number of alternative fermentation technologies for enzyme production were identified in the open literature. Their mass transfer capabilities and their energy efficiencies were...

Agent Technology in Agile Multiparallel Manufacturing and Product Support

NARCIS (Netherlands)

van Moergestel, L.J.M.

2014-01-01

The thesis describes the application of agent technology in product manufacturing and product support. Important issues in the requirements of modern production are short time to market, requirement-driven production and low cost small quantity production. To meet these requirements special low cost

Technology for the product and process data base

Science.gov (United States)

Barnes, R. D.

1984-01-01

The computerized product and process data base is increasingly recognized to be the cornerstone component of an overall system aimed at the integrated automation of the industrial processes of a given company or enterprise. The technology needed to support these more effective computer integrated design and manufacturing methods, especially the concept of 3-D computer-sensible product definitions rather than engineering drawings, is not fully available and rationalized. Progress is being made, however, in bridging this technology gap with concentration on the modeling of sophisticated information and data structures, high-performance interactive user interfaces and comprehensive tools for managing the resulting computerized product definition and process data base.

Removal of diethyl phthalate from water solution by adsorption, photo-oxidation, ozonation and advanced oxidation process (UV/H2O2, O3/H2O2 and O3/activated carbon)

International Nuclear Information System (INIS)

Medellin-Castillo, Nahum A.; Ocampo-Pérez, Raúl; Leyva-Ramos, Roberto; Sanchez-Polo, Manuel; Rivera-Utrilla, José; Méndez-Díaz, José D.

2013-01-01

The objective of this work was to compare the effectiveness of conventional technologies (adsorption on activated carbon, AC, and ozonation) and technologies based on advanced oxidation processes, AOPs, (UV/H 2 O 2 , O 3 /AC, O 3 /H 2 O 2 ) to remove phthalates from aqueous solution (ultrapure water, surface water and wastewater). Diethyl phthalate (DEP) was chosen as a model pollutant because of its high water solubility (1080 mg/L at 293 K) and toxicity. The activated carbons showed a high adsorption capacity to adsorb DEP in aqueous solution (up to 858 mg/g), besides the adsorption mechanism of DEP on activated carbon is governed by dispersive interactions between π electrons of its aromatic ring with π electrons of the carbon graphene planes. The photodegration process showed that the pH solution does not significantly affect the degradation kinetics of DEP and the first-order kinetic model satisfactorily fitted the experimental data. It was observed that the rate of decomposition of DEP with the O 3 /H 2 O 2 and O 3 /AC systems is faster than that with only O 3 . The technologies based on AOPs (UV/H 2 O 2 , O 3 /H 2 O 2 , O 3 /AC) significantly improve the degradation of DEP compared to conventional technologies (O 3 , UV). AC adsorption, UV/H 2 O 2 , O 3 /H 2 O 2 , and O 3 /AC showed a high yield to remove DEP; however, the disadvantage of AC adsorption is its much longer time to reach maximum removal. The best system to treat water (ultrapure and natural) polluted with DEP is the O 3 /AC one since it achieved the highest DEP degradation and TOC removal, as well as the lower water toxicity. -- Highlights: ► Activated carbons showed a high adsorption capacity (up to 858 mg/g) to remove DEP. ► The pH solution did not significantly affect the photodegradation kinetics of DEP. ► The O 3 /H 2 O 2 and O 3 /AC systems were more efficient than O 3 to degrade DEP. ► The generation of HO • from O 3 was enhanced by ACs, mainly by those of basic nature. ► O

A Technological Overview of Biogas Production from Biowaste

Directory of Open Access Journals (Sweden)

Spyridon Achinas

2017-06-01

Full Text Available The current irrational use of fossil fuels and the impact of greenhouse gases on the environment are driving research into renewable energy production from organic resources and waste. The global energy demand is high, and most of this energy is produced from fossil resources. Recent studies report that anaerobic digestion (AD is an efficient alternative technology that combines biofuel production with sustainable waste management, and various technological trends exist in the biogas industry that enhance the production and quality of biogas. Further investments in AD are expected to meet with increasing success due to the low cost of available feedstocks and the wide range of uses for biogas (i.e., for heating, electricity, and fuel. Biogas production is growing in the European energy market and offers an economical alternative for bioenergy production. The objective of this work is to provide an overview of biogas production from lignocellulosic waste, thus providing information toward crucial issues in the biogas economy.

Traditional technologies of fuels production for air-jet engines

Directory of Open Access Journals (Sweden)

Бойченко С. В.

2013-07-01

Full Text Available Available energy resources for various fuels, mainly for gas-turbine engines are presented in the given article. Traditional technologies for jet fuels production from nonrenewable raw materials, such as crude oil, coal, natural gas, oil-shales and others are analyzed in details. Cause and effect relationship between production and use of such fuels and their impact on natural environment is defined. The timeliness and necessity for development of alternative technologies of aviation biofuels production are determined in the given article.

Measuring a Country's Product Ladder and Technology Level based on Trade Flow

Directory of Open Access Journals (Sweden)

Jong-il Kim

2006-06-01

Full Text Available This study tries to quantify the technology level of products based on the concept of product ladder. While many studies on country technology competitiveness use the aggregate indices such as total factor productivity and revealed comparative advantage, this study estimates the ranking of about 2000 products in product ladder by using SITC 5 digit level export data. Based on the product ladder, this study measures the country and industry ranking and explores the characteristics of the ranking. It provides the international comparison of inter-industry and intra-industry ranking differences in product ladder. The statistical relationships between the ranking in product ladder and the determinants of technology level such as R&D and physical capital investment and wage, confirms that the measured ranking in product ladder could be regarded as an indirect indicator of technology level. The product ladder is applied to the estimation of production function to see the effect of the product differentiation on labor productivity.

Application of electron beam curing technology for paper products

International Nuclear Information System (INIS)

Takaharu Miura

1999-01-01

The electron beam (EB) curing technology has rapidly advanced in recent years. However there were few examples applying this technology to paper products. One reason comes from the high price of EB equipment and the other comes from the difficulty of controlling the irradiation which gives damages to paper. In spite of these problems, the EB cured coating layer shows remarkable features, such as solvent-resistance, water-resistance, heat-resistance and high smoothness using the drum casting technique. Concentrating on application of this technology to paper, we have already developed some products. For example, paper for printings (Super Mirror PN) and for white boards (Super Mirror WB) have been manufactured. In this presentation, we are going to introduce this EB curing technique and the products

Ethanol production in China: Potential and technologies

International Nuclear Information System (INIS)

Li, Shi-Zhong; Chan-Halbrendt, Catherine

2009-01-01

Rising oil demand in China has resulted in surging oil imports and mounting environmental pollution. It is projected that by 2030 the demand for fossil fuel oil will be 250 million tons. Ethanol seems to be an attractive renewable alternative to fossil fuel. This study assesses China's ethanol supply potential by examining potential non-food crops as feedstock; emerging conversion technologies; and cost competitiveness. Results of this study show that sweet sorghum among all the non-food feedstocks has the greatest potential. It grows well on the available marginal lands and the ASSF technology when commercialized will shorten the fermentation time which will lower the costs. Other emerging technologies such as improved saccharification and fermentation; and cellulosic technologies will make China more competitive in ethanol production in the future. Based on the estimated available marginal lands for energy crop production and conversion yields of the potential feedstocks, the most likely and optimistic production levels are 19 and 50 million tons of ethanol by 2020. In order to achieve those levels, the roadmap for China is to: select the non-food feedstock most suitable to grow on the available marginal land; provide funding to support the high priority conversion technologies identified by the scientists; provide monetary incentives to new and poor farmers to grow the feedstocks to revitalize rural economy; less market regulation and gradual reduction of subsidies to producers for industry efficiency; and educate consumers on the impact of fossil fuel on the environment to reduce consumption. Since the share of ethanol in the overall fuel demand is small, the impact of ethanol on lowering pollution and enhancing fuel security will be minimal. (author)

Scientific production and technological production: transforming a scientific paper into patent applications.

Science.gov (United States)

Dias, Cleber Gustavo; Almeida, Roberto Barbosa de

2013-01-01

Brazil has been presenting in the last years a scientific production well-recognized in the international scenario, in several areas of knowledge, according to the impact of their publications in important events and especially in indexed journals of wide circulation. On the other hand, the country does not seem to be in the same direction regarding to the technological production and wealth creation from the established scientific development, and particularly from the applied research. The present paper covers such issue and discloses the main similarities and differences between a scientific paper and a patent application, in order to contribute to a better understanding of both types of documents and help the researchers to chose and select the results with technological potential, decide what is appropriated for industrial protection, as well as foster new business opportunities for each technology which has been created.

Determinants And Impacts Of Poultry Production Technologies On ...

African Journals Online (AJOL)

Determinants And Impacts Of Poultry Production Technologies On Productivity ... unbalanced feeding of poultry and low level of education of poultry farmers. ... were suggested by the study as a means of consolidating the gains of the impact.

Technology transfer in a horizontally differentiated product-market

NARCIS (Netherlands)

Mukherjee, A.; Balasubramanian, N.

1999-01-01

This paper considers technology transfer in a Cournot-duopoly market where the firms produce horizontally differentiated products. It turns out that without the threat of imitation from the licensee, the licenser always transfers its best technology. However, the patent licensing contract consists

Adoption of innovative production technologies in the road construction industry

NARCIS (Netherlands)

Habets, M.J.M.; van der Sijde, Peter; Voordijk, Johannes T.

2007-01-01

New procurement methods encourage the adoption of innovative production technologies. This triggers the need for entrepreneurship in the construction industry. The purpose of this study is to provide insights into the adoption processes of a particular set of new production technologies in the Dutch

Designing PV powered LED products - Integration of PV technology in innovative products

NARCIS (Netherlands)

Reinders, Angelina H.M.E.; de Boer, Andries; de Winter, Arjan; Haverlag, Marco; Ossenbrink Sinke, W.; Helm, P.

2009-01-01

This study covers the design of innovative product concepts based on a combination of PV and LED technology. The products were developed in a project that took place in 2008 and 2009 during a cooperation of the University of Twente with Philips Lighting. It is shown that surprisingly unpredictable -

Biofuels Fuels Technology Pathway Options for Advanced Drop-in Biofuels Production

Energy Technology Data Exchange (ETDEWEB)

Kevin L Kenney

2011-09-01

Advanced drop-in hydrocarbon biofuels require biofuel alternatives for refinery products other than gasoline. Candidate biofuels must have performance characteristics equivalent to conventional petroleum-based fuels. The technology pathways for biofuel alternatives also must be plausible, sustainable (e.g., positive energy balance, environmentally benign, etc.), and demonstrate a reasonable pathway to economic viability and end-user affordability. Viable biofuels technology pathways must address feedstock production and environmental issues through to the fuel or chemical end products. Potential end products include compatible replacement fuel products (e.g., gasoline, diesel, and JP8 and JP5 jet fuel) and other petroleum products or chemicals typically produced from a barrel of crude. Considering the complexity and technology diversity of a complete biofuels supply chain, no single entity or technology provider is capable of addressing in depth all aspects of any given pathway; however, all the necessary expert entities exist. As such, we propose the assembly of a team capable of conducting an in-depth technology pathway options analysis (including sustainability indicators and complete LCA) to identify and define the domestic biofuel pathways for a Green Fleet. This team is not only capable of conducting in-depth analyses on technology pathways, but collectively they are able to trouble shoot and/or engineer solutions that would give industrial technology providers the highest potential for success. Such a team would provide the greatest possible down-side protection for high-risk advanced drop-in biofuels procurement(s).

Pathways to Commercial Success. Technologies and Products Supported by the Fuel Cell Technologies Program

Energy Technology Data Exchange (ETDEWEB)

none,

2010-08-01

This report identifies the commercial and near-commercial (emerging) hydrogen and fuel cell technologies and products that resulted from Department of Energy support through the Fuel Cell Technologies Program in the Office of Energy Efficiency and Renewable Energy.

A Complete Set of Technologies for Green Food Pork Production

Institute of Scientific and Technical Information of China (English)

YANG Xing-wu; SHAN An-shan; JIANG Jiu-tian; ZHANG Tian-feng

2003-01-01

Key technologies for green food pork production were described in this article,as aspects of business standardization;production equipments and facilities,product quality control;and pork production site establishment.

Características petrográficas e químicas das rochas encaixantes das mineralizações auríferas do depósito Lavra Velha (Região de Ibitiara, borda oeste da Chapada Diamantina, Bahia)

OpenAIRE

Carlin, Aline de Cassia [UNESP

2016-01-01

O depósito de ouro Lavra Velha, que pertence ao Alvo de Prospecção Lavra Velha, da empresa Yamana Gold, localiza-se na cidade de Ibitiara, centro-oeste do Estado da Bahia e borda oeste do domínio fisiográfico da Chapada Diamantina, situado no Aulacógeno do Paramirim, na região norte do Cráton São Francisco. O depósito foi recentemente inserido na classe de modelo IOCG (Iron Oxide Cooper Gold), onde a mineralização de ouro se hospeda em brechas hematíticas sericitizadas. O principal objetivo d...

Does new product growth accelerate across technology generations?

NARCIS (Netherlands)

S. Stremersch (Stefan); E. Muller (Erwin); R. Peres (Renana)

2010-01-01

textabstractThe academic literature on the growth acceleration of new products presents a paradox. On the one hand, the diffusion literature concludes that more recently introduced products show faster diffusion than older ones. On the other hand, technology generation literature argues that growth

Heme oxygenase-1 protects endothelial cells from the toxicity of air pollutant chemicals

International Nuclear Information System (INIS)

Lawal, Akeem O.; Zhang, Min; Dittmar, Michael; Lulla, Aaron; Araujo, Jesus A.

2015-01-01

Diesel exhaust particles (DEPs) are a major component of diesel emissions, responsible for a large portion of their toxicity. In this study, we examined the toxic effects of DEPs on endothelial cells and the role of DEP-induced heme oxygenase-1 (HO-1) expression. Human microvascular endothelial cells (HMECs) were treated with an organic extract of DEPs from an automobile engine (A-DEP) or a forklift engine (F-DEP) for 1 and 4 h. ROS generation, cell viability, lactate dehydrogenase leakage, expression of HO-1, inflammatory genes, cell adhesion molecules and unfolded protein respone (UPR) gene were assessed. HO-1 expression and/or activity were inhibited by siRNA or tin protoporphyrin (Sn PPIX) and enhanced by an expression plasmid or cobalt protoporphyrin (CoPPIX). Exposure to 25 μg/ml of A-DEP and F-DEP significantly induced ROS production, cellular toxicity and greater levels of inflammatory and cellular adhesion molecules but to a different degree. Inhibition of HO-1 enzymatic activity with SnPPIX and silencing of the HO-1 gene by siRNA enhanced DEP-induced ROS production, further decreased cell viability and increased expression of inflammatory and cell adhesion molecules. On the other hand, overexpression of the HO-1 gene by a pcDNA 3.1D/V5-HO-1 plasmid significantly mitigated ROS production, increased cell survival and decreased the expression of inflammatory genes. HO-1 expression protected HMECs from DEP-induced prooxidative and proinflammatory effects. Modulation of HO-1 expression could potentially serve as a therapeutic target in an attempt to inhibit the cardiovascular effects of ambient PM. - Highlights: • We examined the role of HO-1 expression on diesel exhaust particle (DEP) in endothelial cells. • DEPs exert cytotoxic and inflammatory effects on human microvascular endothelial cells (HMECs). • DEPs induce HO-1 expression in HMECs. • HO-1 protects against the oxidative stress induced by DEps. • HO-1 attenuates the proinflammatory effects

Heme oxygenase-1 protects endothelial cells from the toxicity of air pollutant chemicals

Energy Technology Data Exchange (ETDEWEB)

Lawal, Akeem O.; Zhang, Min; Dittmar, Michael [Division of Cardiology, David Geffen School of Medicine, University of California, Los Angeles, 10833 Le Conte Avenue, CHS 43-264, Los Angeles, CA 90095 (United States); Lulla, Aaron [Division of Cardiology, David Geffen School of Medicine, University of California, Los Angeles, 10833 Le Conte Avenue, CHS 43-264, Los Angeles, CA 90095 (United States); Molecular Toxicology Interdepartmental Program, University of California, Los Angeles (United States); Araujo, Jesus A., E-mail: JAraujo@mednet.ucla.edu [Division of Cardiology, David Geffen School of Medicine, University of California, Los Angeles, 10833 Le Conte Avenue, CHS 43-264, Los Angeles, CA 90095 (United States); Molecular Toxicology Interdepartmental Program, University of California, Los Angeles (United States); Molecular Biology Institute, University of California, Los Angeles (United States)

2015-05-01

Diesel exhaust particles (DEPs) are a major component of diesel emissions, responsible for a large portion of their toxicity. In this study, we examined the toxic effects of DEPs on endothelial cells and the role of DEP-induced heme oxygenase-1 (HO-1) expression. Human microvascular endothelial cells (HMECs) were treated with an organic extract of DEPs from an automobile engine (A-DEP) or a forklift engine (F-DEP) for 1 and 4 h. ROS generation, cell viability, lactate dehydrogenase leakage, expression of HO-1, inflammatory genes, cell adhesion molecules and unfolded protein respone (UPR) gene were assessed. HO-1 expression and/or activity were inhibited by siRNA or tin protoporphyrin (Sn PPIX) and enhanced by an expression plasmid or cobalt protoporphyrin (CoPPIX). Exposure to 25 μg/ml of A-DEP and F-DEP significantly induced ROS production, cellular toxicity and greater levels of inflammatory and cellular adhesion molecules but to a different degree. Inhibition of HO-1 enzymatic activity with SnPPIX and silencing of the HO-1 gene by siRNA enhanced DEP-induced ROS production, further decreased cell viability and increased expression of inflammatory and cell adhesion molecules. On the other hand, overexpression of the HO-1 gene by a pcDNA 3.1D/V5-HO-1 plasmid significantly mitigated ROS production, increased cell survival and decreased the expression of inflammatory genes. HO-1 expression protected HMECs from DEP-induced prooxidative and proinflammatory effects. Modulation of HO-1 expression could potentially serve as a therapeutic target in an attempt to inhibit the cardiovascular effects of ambient PM. - Highlights: • We examined the role of HO-1 expression on diesel exhaust particle (DEP) in endothelial cells. • DEPs exert cytotoxic and inflammatory effects on human microvascular endothelial cells (HMECs). • DEPs induce HO-1 expression in HMECs. • HO-1 protects against the oxidative stress induced by DEps. • HO-1 attenuates the proinflammatory effects

Farm Technologies and Production Risk in the Face of Climate ...

African Journals Online (AJOL)

In countries where insurance and credit markets are thin or missing, production and consumption risks play a critical role in the choice and use of production inputs and adoption of new farm technologies. This paper investigated the effect of selected farm technologies and their risk implications in different rainfall patterns of ...

Effect of Recipe and Production Technology of Chocolate Products on Their Quality During Storage

Directory of Open Access Journals (Sweden)

Lenka Machálková

2017-01-01

Full Text Available The effect of four storage temperature modes (6, 12, 20 and 30 °C on sensory properties of chocolate products and their colour changes in the experiment over a period of 6 months. The results were evaluated with regard to the production technology and composition of chocolate products. The experiment was performed on filled milk chocolate product called Orion Pistachio made in four versions such as a standard containing cocoa mass of 35 % referred to retempered variant (RS and not treated by retempering (NS variant and with higher proportion of cocoa mass (45 % stated as retempered variant (R45 and not treated by retempering (N45 variant. Retempering means the exposure of products for 24 hours at 24 °C immediately after the production and packaging. The results show that the technology of retempering can effectively increase the resistance of chocolate products to the fat bloom as reflected in the improved colour stability. Sensory most acceptable products were stored at 6 and 12 °C throughout the experiment.

MODERN RESOURCE-SAVING TECHNOLOGIES IN FOUNDRY PRODUCTION OF JSC «MINSK TRAKTOR PLANT»

Directory of Open Access Journals (Sweden)

F. A. Domotenko

2016-01-01

Full Text Available In article the main world tendencies of development of the production technology of sandy cores and value of this production in complex technology of manufacture of castings are considered. It is established that the most rational way of production technically and economically is manufacture of wafer sandy cores using the Cold-box-amin technology. Scientific, technical, technological and economic aspects of modernization of foundry production of JSC MTZ with complete transition to production of sandy cores on the resource-saving Cold-box-amin technology are provided. The main distinctive feature of this reequipment – all planned works are based on the domestic technological developments and the equipment created in the cooperation by specialists of JSC BELNIILIT and JSC MTZ. Within GNTP essential support to the provided works was given by the state.

Modern microbial solid state fermentation technology for future biorefineries for the production of added-value products

Directory of Open Access Journals (Sweden)

Musaalbakri Abdul Manan

2017-12-01

Full Text Available The promise of industrial biotechnology has been around since Chaim Weizmann developed acetone–butanol–ethanol fermentation at the University of Manchester in 1917 and the prospects nowadays look brighter than ever. Today’s biorefinery technologies would be almost unthinkable without biotechnology. This is a growing trend and biorefineries have also increased in importance in agriculture and the food industry. Novel biorefinery processes using solid state fermentation (SSF technology have been developed as alternative to conventional processing routes, leading to the production of added-value products from agriculture and food industry raw materials. SSF involves the growth of microorganisms on moist solid substrate in the absence of free-flowing water. Future biorefineries based on SSF aim to exploit the vast complexity of the technology to modify biomass produced by agriculture and the food industry for valuable by-products through microbial bioconversion. In this review, a summary has been made of the attempts at using modern microbial SSF technology for future biorefineries for the production of many added-value products ranging from feedstock for the fermentation process and biodegradable plastics to fuels and chemicals.

Removal of diethyl phthalate from water solution by adsorption, photo-oxidation, ozonation and advanced oxidation process (UV/H{sub 2}O{sub 2}, O{sub 3}/H{sub 2}O{sub 2} and O{sub 3}/activated carbon)

Energy Technology Data Exchange (ETDEWEB)

Medellin-Castillo, Nahum A. [Centro de Investigacion y Estudios de Posgrado, Facultad de Ingenieria, Universidad Autonoma de San Luis Potosi, Av. Dr. M. Nava No.6, San Luis de Potosi, 78290 (Mexico); Ocampo-Perez, Raul [Centro de Investigacion y Estudios de Posgrado, Facultad de Ciencias Quimicas, Universidad Autonoma de San Luis Potosi, San Luis Potosi, 78290 (Mexico); Departamento de Quimica Inorganica, Facultad de Ciencias, Universidad de Granada, 18071, Granada (Spain); Leyva-Ramos, Roberto [Centro de Investigacion y Estudios de Posgrado, Facultad de Ciencias Quimicas, Universidad Autonoma de San Luis Potosi, San Luis Potosi, 78290 (Mexico); Sanchez-Polo, Manuel [Departamento de Quimica Inorganica, Facultad de Ciencias, Universidad de Granada, 18071, Granada (Spain); Rivera-Utrilla, Jose, E-mail: jrivera@ugr.es [Departamento de Quimica Inorganica, Facultad de Ciencias, Universidad de Granada, 18071, Granada (Spain); Mendez-Diaz, Jose D. [Departamento de Quimica Inorganica, Facultad de Ciencias, Universidad de Granada, 18071, Granada (Spain)

2013-01-01

The objective of this work was to compare the effectiveness of conventional technologies (adsorption on activated carbon, AC, and ozonation) and technologies based on advanced oxidation processes, AOPs, (UV/H{sub 2}O{sub 2}, O{sub 3}/AC, O{sub 3}/H{sub 2}O{sub 2}) to remove phthalates from aqueous solution (ultrapure water, surface water and wastewater). Diethyl phthalate (DEP) was chosen as a model pollutant because of its high water solubility (1080 mg/L at 293 K) and toxicity. The activated carbons showed a high adsorption capacity to adsorb DEP in aqueous solution (up to 858 mg/g), besides the adsorption mechanism of DEP on activated carbon is governed by dispersive interactions between {pi} electrons of its aromatic ring with {pi} electrons of the carbon graphene planes. The photodegration process showed that the pH solution does not significantly affect the degradation kinetics of DEP and the first-order kinetic model satisfactorily fitted the experimental data. It was observed that the rate of decomposition of DEP with the O{sub 3}/H{sub 2}O{sub 2} and O{sub 3}/AC systems is faster than that with only O{sub 3}. The technologies based on AOPs (UV/H{sub 2}O{sub 2}, O{sub 3}/H{sub 2}O{sub 2}, O{sub 3}/AC) significantly improve the degradation of DEP compared to conventional technologies (O{sub 3}, UV). AC adsorption, UV/H{sub 2}O{sub 2}, O{sub 3}/H{sub 2}O{sub 2}, and O{sub 3}/AC showed a high yield to remove DEP; however, the disadvantage of AC adsorption is its much longer time to reach maximum removal. The best system to treat water (ultrapure and natural) polluted with DEP is the O{sub 3}/AC one since it achieved the highest DEP degradation and TOC removal, as well as the lower water toxicity. -- Highlights: Black-Right-Pointing-Pointer Activated carbons showed a high adsorption capacity (up to 858 mg/g) to remove DEP. Black-Right-Pointing-Pointer The pH solution did not significantly affect the photodegradation kinetics of DEP. Black

A multi-layered approach to product architecture modeling: Applied to technology prototypes

DEFF Research Database (Denmark)

Ravn, Poul Martin; Guðlaugsson, Tómas Vignir; Mortensen, Niels Henrik

2016-01-01

Companies that wish to include novel technology in the product portfolio may need to test and evaluate the technology with the use of prototypes to learn its benefits. Without clear knowledge of the benefits of the technology to the products in the portfolio, in the form of increased performance...... and managing technology prototypes and can be correlated with improvements in the team collaboration, communication, and development performance......., added functions, or material savings, the prototype development can be hard to manage. In this article, two contributions are made. The first adds to the vocabulary of prototyping, defining technology prototype, a prototype used for testing a novel technology in the context of an existing product...

Technical Integration of Nuclear Hydrogen Production Technology

International Nuclear Information System (INIS)

Lee, Ki Young; Park, J. K.; Chang, J. H.

2009-04-01

These works focus on the development of attainment indices for nuclear hydrogen key technologies, the analysis of the hydrogen production process and the performance estimation for hydrogen production systems, and the assessment of the nuclear hydrogen production cost. For assessing the degree of attainments in comparison with the final goals of VHTR technologies in progress of researches, subdivided are the prerequisite items confirmed to the NHDD concepts. We developed and applied R and D quality management methodology to meet 'Development of Key Technologies for Nuclear Hydrogen' project. And we also distributed R and D QAM and R and D QAP to each teams and are in operation. The preconceptual flow diagrams of SI, HTSE, and HyS processes are introduced and their material and energy balances have been proposed. The hydrogen production thermal efficiencies of not only the SI process as a reference process but also the HTSE and HyS processes were also estimated. Technical feasibility assessments of SI, HTSE, and HyS processes have been carried out by using the pair-wise comparison and analytic hierarchy process, and it is revealed that the experts are considering the SI process as the most feasible process. The secondary helium pathway across the SI process is introduced. Dynamic simulation codes for the H2S04vaporizer, sulfuric acid and sulfur trioxide decomposers, and HI decomposer on the secondary helium pathway and for the primary and secondary sulfuric acid distillation columns, HIx solution distillation column, and preheater for HI vapor have been developed and integrated

Set of information technologies and their role in automation of agricultural production

Directory of Open Access Journals (Sweden)

V. V. Al’t

2018-01-01

Full Text Available The modern enterprises of agrarian and industrial complex are characterized by the high level of automation of technological processes. The technological development level conformto 5th and 6th technology revolutions. The automatic and automated technologies in crop production and livestock production use data of internet technologies, Global Positioning Satellite survey and observations, mashine and tractor aggregates automated operating. The models nucleus and row of information models of agricultural objects were designed on the basis of information streams systematization. The analysis of results of simulation of biological objects, cenosises, ecosystems, agro cenosises and agroecosystems showed that the most acceptable type of model is the systemically determined dynamic model of potentially effective type. The Internet-oriented database of innovative development of institutes of an agrarian profile is designed. It contains the information about sorts, machines, mechanization means, electrification and technologies in crop production, livestock production, forage production, feed processing, crop protection, biotechnologies, mechanization, veterinary science and agricultural production processing. The database is positioned as the subject-oriented, retrieval database in web space. The list of indices to which the created architecture of the database corresponds is defined. More than 20 various databases of agricultural purpose which are used in educational process and production are created. These databases are useful to agricultural producers and also organizers of agricultural production, scientists, teachers and students. Information on key indicators of innovative products and institutes – developers of innovative solutions is provided in a basis.

GROUP TECHNOLOGY IN CONTEXT OF THE PRODUCT CLASSIFICATION

Directory of Open Access Journals (Sweden)

Lenka Debnárová

2014-03-01

Full Text Available In the intensive competitive environment of the global economy, the survival of even the most well-established the world manufacturers depends on the ability to improve continuously quality while reducing costs. The resulting higher productivity is the key to market leadership and gaining sustainable competitive advantage. This paper outlines a group technology and classification of products which improve productivity, quality, inventory management of a company and reduce production times.

Produced water: Market and global trends - oil production - water production - choice of technology

International Nuclear Information System (INIS)

Robertson, Steve

2006-01-01

The presentation discusses various aspects of the world oil production, the energy demand, the future oil supply, the oil prices and the production growth. Some problems with produced water are also discussed as well as aspects of the market for produced water technology (tk)

Caracterización de comunidades microbianas asociadas a depósitos de minerales secundarios en tubos de lava y minas de agua

OpenAIRE

García-Sánchez, A. M.

2016-01-01

La presente tesis doctoral representa un trabajo multidisciplinar, donde confluyen diversas especialidades biológicas, geoquímicas y mineralógicas, mediante la realización de un estudio geomicrobiológico exhaustivo de los ambientes de estudio. Los objetivos específicos planteados son los siguientes: 1. Conocer la diversidad de comunidades microbianas subterráneas asociadas a depósitos de minerales secundarios recogidos en minas de agua excavadas en granito y tubos de lava de diferentes ...

Set of information technologies and their role in automation of agricultural production

OpenAIRE

V. V. Al’t

2018-01-01

The modern enterprises of agrarian and industrial complex are characterized by the high level of automation of technological processes. The technological development level conformto 5th and 6th technology revolutions. The automatic and automated technologies in crop production and livestock production use data of internet technologies, Global Positioning Satellite survey and observations, mashine and tractor aggregates automated operating. The models nucleus and row of information models of a...

The Role of the Technology Supplier in the Politics of Production

DEFF Research Database (Denmark)

Koch, Christian

1996-01-01

from a multitude of positions outside the factory. This includes the impacts through formation of subjectivity, labour market, social security, the origin of rawmateriel, ie.the production chains, and the technology used in the factory. On the basis of a Danish study the role of the technology supplier......This paper examines the relations between the technology supplier and the customer factory as an element of the politics of production. It is initially argued that labour process theory cannot limit itself to the analysis of individual enterprises. The politics in production is actually impacted...

Marketing mix for consumer high technology products

Directory of Open Access Journals (Sweden)

Dovleac, L.

2012-01-01

Full Text Available This paper includes an analysis upon the variables of marketing mix for high technology products used for individual consumption. There are exposed the essential aspects related to marketing policies and strategies used by high technology companies for providing consumers the best solutions tailored to their needs. A special attention is given to the necessity for inclusion in the marketing mix of the fifth element – the assistance and informational support for customers.

Registro do Icnogênero Ophiomorpha Lundgreen, 1891 em Depósitos da Planície Costeira (Quaternário (Quaternário do Estado do Rio de Janeiro.

Directory of Open Access Journals (Sweden)

Rommulo Mendes Carvalho Barreiro

2007-07-01

Full Text Available A região dos Lagos Fluminenses, localizadano litoral norte do estado do Rio de Janeiro registradiversos episódios sedimentares relacionados com avariação do nível do mar ocorrida durante o Holoceno.Os depósitos variam desde intervalos pelíticos comcoquinas subordinadas, datados de 5.100 anos A.P. atéareias de cristas de praia com idade provavelmentemais recente. Este trabalho tem como finalidadeassinalar estes icnitos, em depósitos holocênicos dolitoral norte do estado do Rio de Janeiro, contribuindoassim com o conhecimento do registro fossílifero,pouco estudado no local. Na localidade de Fazendada Barra, município de Casimiro de Abreu, entre abase do Morro de São João e a margem esquerda doRio São João, ocorrem pacotes de arenitos maciçoscom contribuição de argila, de coloração castanhae espessura até 2m, laminação plano-paralela etroncos fossilizados. Nestes depósitos destacam-seestruturas sedimentares de preenchimento (casts,identificadas no icnogênero Ophiomorpha. Estematerial consiste de dezoito fragmentos de bastõesde composição argilosa. O sedimento é similarao depósitado no interior de tubos de crustáceos,provavelmente pertencentes ao gênero Callichirus.Os tubos são produzidos por bioturbação, comfinalidades de habitação e alimentação, sendo,portanto, classificados etologicamente comoFodinichnia. É um dos icnofósseis mais conhecidosao longo do registro geológico, e muito utilizadocomo indicador paleoambiental. Ocorrem emsubstratos inconsolidados do tipo softground,em ambientes rasos de inframaré. É o primeiroregistro de icnofósseis por bioturbação encontradona região. A presença de icnofósseis representa aexistência de organismos na paleocomunidade, quenão se preservaram na tafocenose, contribuindo cominformações paleoecológicas e paleoambientaispara o conhecimento da evolução costeira do nortedo Estado do Rio de Janeiro. Ademais, é possívelcorrelacionar estas estruturas com a

Gasto energético e medidas antropométricas de novas usuárias do contraceptivo injetável trimestral de acetato de medroxiprogesterona de depósito

Directory of Open Access Journals (Sweden)

Priscilla de Nazaré Silva dos SANTOS

2015-10-01

Full Text Available Objetivo:Avaliar o gasto energético e as medidas antropométricas de mulheres durante o primeiro ano de uso do método contraceptivo de acetato de medroxiprogesterona de depósito.Métodos:Estudo prospectivo com grupo de comparação. Foram incluídas mulheres saudáveis, não obesas, nunca usuárias de acetato de medroxiprogesterona de depósito e sem antecedentes que pudessem contribuir para a variação do peso corporal; foram distribuídas em dois grupos, 28 usuárias de acetato de medroxiprogesterona e 24 usuárias de dispositivo intrauterino de cobre, pareadas por idade (±1 ano e índice de massa corporal (kg/m2. As variáveis estudadas foram sociodemográficas (idade, etnia, tabagismo, etilismo, atividade física, classe econômica e escolaridade, peso (kg, índice de massa corporal, gasto energético basal e total, medidas de circunferência de cintura e quadril (cm e relação cintura-quadril.Resultados:A idade das mulheres variou de 20-39 anos. As médias de idade/índice de massa corporal foram 29,6 (DP=±5,2 anos/23,9 (±3,6 kg/m2, no grupo de acetato de medroxiprogesterona de depósito, e de 28,6 (DP=±5,2 anos/ 24,5 (±2,7 kg/m2, no grupo de dispositivo intrauterino de cobre. Após análise de variância para medidas repetidas, as usuárias de acetato de medroxiprogesterona de depósito apresentaram ganho de 2,2 kg no peso corporal e de -0,2 kg no grupo do dispositivo intrauterino de cobre, sem diferença estatisticamente significativa entre eles. Não houve discrepância nas demais variáveis estudadas.Conclusão:Mulheres saudáveis e jovens não apresentaram mudança no peso, nas medidas e nos gastos energéticos durante o primeiro ano de uso do contraceptivo acetato de medroxiprogesterona. A orientação em relação aos hábitos saudáveis de vida e o monitoramento de medidas são importantes para o controle do peso corporal em usuárias de métodos contraceptivos.

Los depósitos metálicos burgaleses y la metalurgia del Bronce Final en la Cuenca del Duero: algunas reflexiones

OpenAIRE

Fernández Manzano, Julio; Herrán Martínez, José Ignacio; Rovira Llorens, Salvador

2005-01-01

El Bronce Final en la Meseta Norte española está protagonizado, por un lado, por yacimientos de tipo Cogotas I y, por otro, por la presencia de depósitos metálicos de bronce, sistemáticamente localizados sin contexto arqueológico. En el presente trabajo se plantea la probabilidad de que gran parte de estos bronces fueron moldeados por gentes Cogotas I. Se defiende asimismo que algunos de ellos se fundieron en un horizonte cultural más avanzado -Soto de Medinilla-, ya de los inicios de la Edad...

Implementation of NFC technology for industrial applications: case flexible production

Science.gov (United States)

Sallinen, Mikko; Strömmer, Esko; Ylisaukko-oja, Arto

2007-09-01

Near Field communication (NFC) technology enables a flexible short range communication. It has large amount of envisaged applications in consumer, welfare and industrial sector. Compared with other short range communication technologies such as Bluetooth or Wibree it provides advantages that we will introduce in this paper. In this paper, we present an example of applying NFC technology to industrial application where simple tasks can be automatized and industrial assembly process can be improved radically by replacing manual paperwork and increasing trace of the products during the production.

Suelos agrícolas contaminados por metales pesados provenientes de depósitos de vehículos de desecho

OpenAIRE

Miguel Ángel Balderas-Plata

2003-01-01

El propósito de este trabajo fue determinar el grado de contaminación por metales pesados provenientes de depósitos de vehículos de desecho en suelos agrícolas que se encuentran en la periferia de éstos. Las muestras de suelo (0 a 10 y 10 a 30 cm de profundidad) se tomaron a lo largo de un trayecto a intervalos regulares de 5 m, hasta una distancia de 25 m. Se observó que en el suelo estudiado, en el ejido de San Gabriel Jilotepec (ESAJ), los contenidos de Cd, Cu, Cr, Ni, Pb y Zn presentan un...

A Research Review on the Key Technologies of Intelligent Design for Customized Products

Directory of Open Access Journals (Sweden)

Shuyou Zhang

2017-10-01

Full Text Available The development of technologies such as big data and cyber-physical systems (CPSs has increased the demand for product design. Product digital design involves completing the product design process using advanced digital technologies such as geometry modeling, kinematic and dynamic simulation, multi-disciplinary coupling, virtual assembly, virtual reality (VR, multi-objective optimization (MOO, and human-computer interaction. The key technologies of intelligent design for customized products include: a description and analysis of customer requirements (CRs, product family design (PFD for the customer base, configuration and modular design for customized products, variant design for customized products, and a knowledge push for product intelligent design. The development trends in intelligent design for customized products include big-data-driven intelligent design technology for customized products and customized design tools and applications. The proposed method is verified by the design of precision computer numerical control (CNC machine tools.

Increased wood-fiber production: technology, economics, and ecology

Science.gov (United States)

William R. Bentley

1973-01-01

Forest tree improvement is a form of technological change, and it should be viewed as such. The economic objective of technological change is to increase productivity per dollar invested. This is accomplished through selection and breeding for increased growth rates or reduced losses to insects and disease. Programs which yield improved planting stock make forest...

The technologies of zirconium production for nuclear fuel components in Ukraine

International Nuclear Information System (INIS)

Semenov, G.R.

2000-01-01

Perspectives of development zirconium alloys and WWER-1000 assemble components production in Ukraine are considered. Basic technological production processes of zirconium alloys in conditions of Ukrainian enterprises and modern requirements are analyzed. The critical processes on technical and economic criteria are defined. The main directions of activity and steps on technological processes improvement for production quality providing are offered. (author)

Biodiesel production technologies: review

Directory of Open Access Journals (Sweden)

Shemelis Nigatu Gebremariam

2017-05-01

Full Text Available Biodiesel is a fuel with various benefits over the conventional diesel fuel. It is derived from renewable resources, it has less emission to environment, it is biodegradable so has very limited toxicity and above all its production can be decentralized so that it could have a potential in helping rural economies. However, there are also some worth mentioning challenges associated with production of biodiesel. Among them repeatedly mentioned are the cost of feedstock and the choice of convenient technology for efficient production of the fuel from diverse feedstock types. There are four main routes by which raw vegetable oil and/or animal fat can be made suitable for use as substituent fuel in diesel engines without modification. These are direct use or blending of oils, micro-emulsion, thermal cracking or pyrolysis and transesterification reaction. Due to the quality of the fuel produced, the transesterification method is the most preferred way to produce biodiesel from diverse feedstock types. Through this method, oils and fats (triglycerides are converted to their alkyl esters with reduced viscosity to near diesel fuel levels. There are different techniques to carry out transesterification reaction for biodiesel production. Each technique has its own advantages and disadvantages as well as its own specifically convenient feedstock character. There are also some very important reaction conditions to be given due attention in each of this techniques for efficient production of biodiesel, such as molar ratio of alcohol to oil, type and amount of catalyst, reaction temperature, reaction time, reaction medium, type and relative amount of solvents, among others. This review is meant to investigate the main transesterification techniques for biodiesel production in terms of their choice of feedstock character as well as their determinately required reaction conditions for efficient biodiesel production, so that to give an overview on their advantages

Current status and challenges for automotive battery production technologies

Science.gov (United States)

Kwade, Arno; Haselrieder, Wolfgang; Leithoff, Ruben; Modlinger, Armin; Dietrich, Franz; Droeder, Klaus

2018-04-01

Production technology for automotive lithium-ion battery (LIB) cells and packs has improved considerably in the past five years. However, the transfer of developments in materials, cell design and processes from lab scale to production scale remains a challenge due to the large number of consecutive process steps and the significant impact of material properties, electrode compositions and cell designs on processes. This requires an in-depth understanding of the individual production processes and their interactions, and pilot-scale investigations into process parameter selection and prototype cell production. Furthermore, emerging process concepts must be developed at lab and pilot scale that reduce production costs and improve cell performance. Here, we present an introductory summary of the state-of-the-art production technologies for automotive LIBs. We then discuss the key relationships between process, quality and performance, as well as explore the impact of materials and processes on scale and cost. Finally, future developments and innovations that aim to overcome the main challenges are presented.

Pathways to Commercial Success. Technologies and Products Supported by the Fuel Cell Technologies Program

Energy Technology Data Exchange (ETDEWEB)

none,

2011-09-01

This FY 2011 report updates the results of an effort to identify and characterize commercial and near-commercial (emerging) technologies and products that benefited from the support of the Fuel Cell Technologies Program and its predecessor programs within DOE's Office of Energy Efficiency and Renewable Energy.

76 FR 6839 - ActiveCore Technologies, Inc., Battery Technologies, Inc., China Media1 Corp., Dura Products...

Science.gov (United States)

2011-02-08

... SECURITIES AND EXCHANGE COMMISSION [File No. 500-1] ActiveCore Technologies, Inc., Battery Technologies, Inc., China Media1 Corp., Dura Products International, Inc. (n/k/a Dexx Corp.), Global Mainframe Corp., GrandeTel Technologies, Inc., Magna Entertainment Corp. (n/k/a Reorganized Magna Entertainment...

Changes in the Metabolome in Response to Low-Dose Exposure to Environmental Chemicals Used in Personal Care Products during Different Windows of Susceptibility.

Science.gov (United States)

Houten, Sander M; Chen, Jia; Belpoggi, Fiorella; Manservisi, Fabiana; Sánchez-Guijo, Alberto; Wudy, Stefan A; Teitelbaum, Susan L

2016-01-01

The consequences of ubiquitous exposure to environmental chemicals remain poorly defined. Non-targeted metabolomic profiling is an emerging method to identify biomarkers of the physiological response to such exposures. We investigated the effect of three commonly used ingredients in personal care products, diethyl phthalate (DEP), methylparaben (MPB) and triclosan (TCS), on the blood metabolome of female Sprague-Dawley rats. Animals were treated with low levels of these chemicals comparable to human exposures during prepubertal and pubertal windows as well as chronically from birth to adulthood. Non-targeted metabolomic profiling revealed that most of the variation in the metabolites was associated with developmental stage. The low-dose exposure to DEP, MPB and TCS had a relatively small, but detectable impact on the metabolome. Multiple metabolites that were affected by chemical exposure belonged to the same biochemical pathways including phenol sulfonation and metabolism of pyruvate, lyso-plasmalogens, unsaturated fatty acids and serotonin. Changes in phenol sulfonation and pyruvate metabolism were most pronounced in rats exposed to DEP during the prepubertal period. Our metabolomics analysis demonstrates that human level exposure to personal care product ingredients has detectable effects on the rat metabolome. We highlight specific pathways such as sulfonation that warrant further study.

Machine Vision Technology for the Forest Products Industry

Science.gov (United States)

Richard W. Conners; D.Earl Kline; Philip A. Araman; Thomas T. Drayer

1997-01-01

From forest to finished product, wood is moved from one processing stage to the next, subject to the decisions of individuals along the way. While this process has worked for hundreds of years, the technology exists today to provide more complete information to the decision makers. Virginia Tech has developed this technology, creating a machine vision prototype for...

Resource-saving policy in the context of technological updating of ferroalloy production

Directory of Open Access Journals (Sweden)

Yelena Anatolyevna Pozdnyakova

2011-06-01

Full Text Available This paper substantiates the need for technological modernization of ferroalloy production which should be based on energy- and resource-saving technologies. Lean-technology is considered as a tool for effective management of material costs organization. A search algorithm for ways to improve the manufacturing process of a company, with which usage the author suggests a number of areas that require optimization, was developed. Measures aimed at solving the problems of resource-saving at JSC "Klyuchevsky Ferroalloy Plant" were proposed: introduction of resource saving technologies, suggesting involvement in the production of non-liquid products and the use of process waste and upgrading of individual processes. As a result of the proposed activities, tangible results have been achieved: reducing production costs, saving raw materials, reducing storage costs and release of additional areas, decrease of production losses.

Technological challenges at ITER plasma facing components production in Russia

Energy Technology Data Exchange (ETDEWEB)

Mazul, I.V., E-mail: mazuliv@niiefa.spb.su [Efremov Institute, 196641 St. Petersburg (Russian Federation); Belyakov, V.A.; Gervash, A.A.; Giniyatulin, R.N.; Guryeva, T.M.; Kuznetsov, V.E.; Makhankov, A.N.; Okunev, A.A. [Efremov Institute, 196641 St. Petersburg (Russian Federation); Sevryukov, O.N. [MEPhI, 115409 Moscow (Russian Federation)

2016-11-01

Highlights: • Technological aspects of ITER PFC manufacturing in Russia are presented. • Range of technologies to be used during manufacturing of ITER PFC at Efremov Institute has been, in general, defined and their complexity, originality and difficulty are described. • Some features and challenges of welding, brazing and various tests are discussed. - Abstract: Major part of ITER plasma facing components will be manufactured in the Russian Federation (RF). Operational conditions and other requirements to these components, as well as the scale of production, are quite unique. These unique features and related technological solutions found in the frame of the project are discussed. Procedure breakdown and results of qualification for the proposed technologies and potential producers are presented, based on mockups production and testing. Design of qualification mockups and prototypes, testing programs and results are described. Basic quantitative and qualitative parameters of manufactured components and methods of quality control are presented. Critical manufacturing issues and prospects for unique production for future fusion needs are discussed.

Development of interface technology for nuclear hydrogen production system

International Nuclear Information System (INIS)

Lee, Ki Young; Park, J. K.; Chang, J. H.

2012-06-01

These works focus on the development of attainment indices for nuclear hydrogen key technologies, the analysis of the hydrogen production process and the performance estimation for hydrogen production systems, and the assessment of the nuclear hydrogen production economy. The codes for analyzing the hydrogen production economy are developed for calculating the unit production cost of nuclear hydrogen. We developed basic R and D quality management methodology to meet design technology of VHTR's needs. By putting it in practice, we derived some problems and solutions. We distributed R and D QAP and Q and D QAM to each teams and these are in operation. Computer simulations are performed for estimating the thermal efficiency for the electrodialysis component likely to adapting as one of the hydrogen production system in Korea and EED-SI process known as the key components of the hydrogen production systems. Using the commercial codes, the process diagrams and the spread-sheets were produced for the Bunsen reaction process, Sulphuric Acid dissolution process and HI dissolution process, respectively, which are the key components composing of the SI process

TECHNOLOGY OF PRODUCTION OF CERAMIC TILES BASED ON DOLERITE AND FUSIBLE CLAY

Directory of Open Access Journals (Sweden)

Pleshko Marianna Viktorovna

2018-02-01

Full Text Available The paper presents a completely new composition of the ceramic mass for production of ceramic tiles for interior lining of walls, on the basis of fusible clay. The optimal compositions of jade engobe and glossy glaze, the most suitable for this composition, are determined. A new technological scheme is developed for production of ceramic tiles for interior lining based on dolerite and fusible clay. The curve of firing, which is the most suitable for charge masses and decorative coating compositions being used, has been constructed. Subject: ceramic mass for the production of ceramic facing tiles. Ceramic tiles are the most popular building material in Russia. The most promising technology for its production from the standpoint of technical and economic efficiency is the technology of rapid single firing, which is rarely used at the plants of our country. In this regard, the development and implementation of new effective compositions of ceramic masses and decorative coatings that are the most compatible with the specifics of rapid single firing technology, based on new unconventional raw materials, are very relevant and promising. Research objectives: development of technological parameters, compositions of ceramic masses and decorative coatings of ceramic tiles for the internal wall lining that provide an increase in tiles production efficiency using the technology of rapid single firing through the use of non-traditional plagioclase-pyroxene raw materials: dolerites, loam and technogenic raw materials. Materials and methods: technological, numerical and experimental studies were conducted. To select the optimal composition of the ceramic mass, the method of mathematical planning was used, namely the simplex-centroid design of Scheffe. To identify the scientific foundations of the energy-efficient production technology being developed, differential thermal and X-ray phase, optical, electron microscopic and dilatometric studies were applied

France at CERN

CERN Multimedia

2005-01-01

From 04 to 06 october 2005 Administration Building Bldg 60/61 - ground and 1st floor 09:00 - 17:30   Thirty-two companies will present their latest technology at the "France at CERN" exhibition. French industry will exhibit products and technologies which are related to the field of particle physics. The main subjects are: mechanical engineering, electrical engineering, electronics, data processing, various supplies, civil engineering and buildings, and vacuum and low temperature technology. The exhibition is organised by UBIFRANCE, the French Committee for Trade Events Abroad.  You will find below : the list of exhibitors.   A detailed programme will be available in due course at : your Departmental secretariat, the reception information desk, Building 33, the exhibition itself.   A detailed list of the firms involved is already available under the following FI link: http://fi-dep.web.cern.ch/fi-dep/structure/memberstates/exhibitions_visits.htm     LIST OF EXHIBITORS AIR LIQUIDE DTA ALSTO...

France at CERN

CERN Multimedia

2005-01-01

From 04 to 06 october 2005 Administration Building Bldg 60/61 - ground and 1st floor 09:00 - 17:30   Thirty-two companies will present their latest technology at the "France at CERN" exhibition. French industry will exhibit products and technologies which are related to the field of particle physics. The main subjects are: mechanical engineering, electrical engineering, electronics, data processing, various supplies, civil engineering and buildings, and vacuum and low temperature technology. The exhibition is organised by UBIFRANCE, the French Committee for Trade Events Abroad.  You will find below : the list of exhibitors.   A detailed programme will be available in due course at : your Departmental secretariat, the reception information desk, Building 33, the exhibition itself.   A detailed list of the firms involved is already available under the following FI link: http://fi-dep.web.cern.ch/fi-dep/structure/memberstates/exhibitions_visits.htm     LIST OF EXHIBITORS AIR LIQUIDE DTA ALSTOM...

Italy at CERN

CERN Multimedia

Caroline Laignel

2005-01-01

15 - 17 November 2005 Main Building Bldg 60 - ground and 1st floor 09:00 - 17:30 Twenty-six companies will present their latest technology at the "Italy at CERN" exhibition. Italian industry will exhibit products and technologies which are related to the field of particle physics. The main subjects are: electrical engineering, electronics, logistics, mechanical engineering, vacuum and low-temperature technology.   The exhibition is being organised by the INFN in Padua. The exhibitors are listed below.   A detailed programme will be available in due course : from your Departmental secretariat, at the exhibition, on the FI homepage http://fi-dep.web.cern.ch/fi-dep/structure/memberstates/exhibitions_visits.htm LIST OF EXHIBITORS  Ansaldo Superconduttori Spa CAEN Spa CECOM Snc Consorzio Canavese Export CPE Italia Spa Criotec Impianti Srl CTE Sistemi Srl Carpenteria S. Antonio Spa E.E.I. Equipaggiamenti Elettronici Industriali Elettronica Conduttori Srl Goma Elettronica Spa ICAR Spa Intercond Spa Keno...

Italy at CERN

CERN Multimedia

Caroline Laignel

2005-01-01

15 - 17 November 2005 Main Building Bldg 60 - ground and 1st floor 09:00 - 17:30 Twenty-six companies will present their latest technology at the "Italy at CERN" exhibition. Italian industry will exhibit products and technologies which are related to the field of particle physics.The main subjects are: electrical engineering, electronics, logistics, mechanical engineering, vacuum and low-temperature technology. The exhibition is being organised by the INFN in Padua.The exhibitors are listed below.A detailed programme will be available in due course : from your Departmental secretariat, at the exhibition, on the FI homepage http://fi-dep.web.cern.ch/fi-dep/structure/memberstates/exhibitions_visits.htm LIST OF EXHIBITORS  Ansaldo Superconduttori Spa CAEN Spa CECOM Snc Consorzio Canavese Export CPE Italia Spa Criotec Impianti Srl CTE Sistemi Srl Carpenteria S. Antonio Spa E.E.I. Equipaggiamenti Elettronici Industriali Elettronica Conduttori Srl Goma Elettronica Spa ICAR Spa Intercond Spa Kenotec Srl O...

Dielectrophoresis microjets: a merging of electromagnetics and microfluidics for on-chip technologies

Science.gov (United States)

Hill, Kyle A.; Collier, Christopher M.; Holzman, Jonathan F.

2014-05-01

Digital (droplet-based) microfluidic systems apply electromagnetic characteristics as the fundamental fluid actuation mechanism. These systems are often implemented in two-dimensional architectures, overcoming one-dimensional continuous flow channel practical issues. The fundamental operation for digital microfluidics requires the creation of an electric field distribution to achieve desired fluid actuation. The electric field distribution is typically non-uniform, enabling creation of net dielectrophoresis (DEP) force. The DEP force magnitude is proportional to the difference between microdroplet and surrounding medium complex dielectric constants, and the gradient of the electric field magnitude squared. Force sign/direction can be manipulated to achieve a force towards higher (positive DEP) or lower (negative DEP) electrostatic energy by tailoring the relative difference between microdroplet and surrounding medium complex dielectric constants through careful selection of the devices fabrication materials. The DEP force magnitudes and directions are applied here for well-controlled and high-speed microdroplet actuation. Control and speed characteristics arise from significant differences in the microdroplet/medium conductivity and the use of a micropin architecture with strong electric field gradients. The implementation, referred to here as a DEP microjet, establishes especially strong axial propulsion forces. Single- and double-micropin topologies achieve strong axial propulsion force, but only the double-micropin topology creates transverse converging forces for stable and controlled microdroplet actuation. Electric field distributions for each topology are investigated and linked to axial and transverse forces. Experimental results are presented for both topologies. The double-micropin topology is tested with biological fluids. Microdroplet actuation speeds up to 25 cm/s are achieved—comparable to the fastest speeds to-date.

Health information technology vendor selection strategies and total factor productivity.

Science.gov (United States)

Ford, Eric W; Huerta, Timothy R; Menachemi, Nir; Thompson, Mark A; Yu, Feliciano

2013-01-01

The aim of this study was to compare health information technology (HIT) adoption strategies' relative performance on hospital-level productivity measures. The American Hospital Association's Annual Survey and Healthcare Information and Management Systems Society Analytics for fiscal years 2002 through 2007 were used for this study. A two-stage approach is employed. First, a Malmquist model is specified to calculate hospital-level productivity measures. A logistic regression model is then estimated to compare the three HIT adoption strategies' relative performance on the newly constructed productivity measures. The HIT vendor selection strategy impacts the amount of technological change required of an organization but does not appear to have either a positive or adverse impact on technical efficiency or total factor productivity. The higher levels in technological change experienced by hospitals using the best of breed and best of suite HIT vendor selection strategies may have a more direct impact on the organization early on in the process. However, these gains did not appear to translate into either increased technical efficiency or total factor productivity during the period studied. Over a longer period, one HIT vendor selection strategy may yet prove to be more effective at improving efficiency and productivity.

Nuevas vías de depósito, nuevos proyectos: consolidación del repositorio institucional RODERIC

Directory of Open Access Journals (Sweden)

Barrueco, José Manuel

2013-12-01

Full Text Available El objetivo de este artículo es dar a conocer los nuevos proyectos del repositorio institucional de la Universitat de València, RODERIC, así como las nuevas vías de depósito de documentos de investigación. Para ello, se analizan las distintas actuaciones dentro del apartado de investigación del repositorio. En primer lugar, las centradas en el área de revistas editadas en la UV, los proyectos sobre digitalización de tesis retrospectivas y publicación de tesis corrientes, y finalmente la integración del sistema CRIS con el repositorio. Se acaba con la descripción de una serie de mejoras que se preveen están disponibles en la segunda mitad de año.

Various Determinant Factors of Production Technology Adoption in Creative Souvenir Micro Enterprise

Directory of Open Access Journals (Sweden)

Dumasari Dumasari

2017-10-01

Full Text Available This study aims to examine the existence of several factors that determine the power of the adoption of production technology on micro souvenirs creative enterprise. The location of the research was determined purposely in Purbalingga Wetan Subdistrict, Purbalingga District, Central Java Province, Indonesia. Research respondents numbered 28 people. The results showed that the various determinants of the adoption of production technology have economic, social and environmental motives. The power of influence of each factor is also distinct. The adoption of different craftsmen resulted in the quality of souvenir products from coconut waste being unequal. Some have a motif design according to market trend. Product price level is feasible. However, some products are only produced semi-finished. The price of this product is relatively lower. The economic feasibility of craftsmen is closely related to the rate of adoption of production technology. There are small number (<25 percent of craftsmen use mechanical technology. The rest is still aided on the traditional manual techniques in processing waste coconut into souvenirs or creative handicraft.

Life cycle assessment of products and technologies. LCA Symposium

Energy Technology Data Exchange (ETDEWEB)

Koukkari, H.; Nors, M. (eds.)

2009-12-15

VTT Technical Research Centre of Finland organised a Symposium 'Life Cycle Assessment of Products and Technologies' on the 6th of October, 2009. The Symposium gave a good overview of methods, tools and applications of Life Cycle Assessment developed and utilised in several technology fields of VTT. The 12 Symposium papers deal with recent LCA studies on products and technologies. The scope ranges from beverage cups to urban planning, from inventory databases to rating systems. Topical issues relating to climate change concern biorefineries and the overall impacts of the utilisation of biomass. The calculation of carbon footprints is also introduced through paper products and magazines. One example of LCA tools developed at VTT addresses cement manufacturing. VTT's transport emission database, LIPASTO, was introduced in detail. The use of LCA methods and life cycle thinking is described in various contexts: product development in relation to precision instruments; selection of materials and work processes in relation to sediment remediation project; and procedures of sustainability rating through VTT's office building Digitalo. The Climate Bonus project presented a demonstrated ICT support that informs about the greenhouse gas emissions and carbon footprints of households. (orig.)

Product with service, technology with business model

DEFF Research Database (Denmark)

Sakao, Tomohiko; McAloone, Tim C.

2011-01-01

Looking back over the last decade, the importance of an expanded understanding of engineering design has been shared within the engineering design community. Presented concepts and methods to support such expansion include Functional Product Development, Service Engineering, and Product/Service-S...... promising concept beyond PSS design; via an integrated development of technology and business model. This can be of particular interest for further research, especially due to its high freedom for designers....

Alcohol, biomass energy: technological and economical aspects of production

International Nuclear Information System (INIS)

Ometto, Joao Guilherme Sabino

1993-01-01

This paper presents some technological and economical aspects of sugar cane and alcohol production in Brazil since 1975 until nowadays. The evolution of their production is analysed and the relationship between cost-benefit and ethanol consumption is discussed

Agricultural R&D, technology and productivity.

Science.gov (United States)

Piesse, J; Thirtle, C

2010-09-27

The relationships between basic and applied agricultural R&D, developed and developing country R&D and between R&D, extension, technology and productivity growth are outlined. The declining growth rates of public R&D expenditures are related to output growth and crop yields, where growth rates have also fallen, especially in the developed countries. However, growth in output value per hectare has not declined in the developing countries and labour productivity growth has increased except in the EU. Total factor productivity has generally increased, however it is measured. The public sector share of R&D expenditures has fallen and there has been rapid concentration in the private sector, where six multinationals now dominate. These companies are accumulating intellectual property to an extent that the public and international institutions are disadvantaged. This represents a threat to the global commons in agricultural technology on which the green revolution has depended. Estimates of the increased R&D expenditures needed to feed 9 billion people by 2050 and how these should be targeted, especially by the Consultative Group on International Agricultural Research (CGIAR), show that the amounts are feasible and that targeting sub-Saharan Africa (SSA) and South Asia can best increase output growth and reduce poverty. Lack of income growth in SSA is seen as the most insoluble problem.

Additive Manufacturing and Casting Technology Comparison: Mechanical Properties, Productivity and Cost Benchmark

Science.gov (United States)

Vevers, A.; Kromanis, A.; Gerins, E.; Ozolins, J.

2018-04-01

The casting technology is one of the oldest production technologies in the world but in the recent years metal additive manufacturing also known as metal 3D printing has been evolving with huge steps. Both technologies have capabilities to produce parts with internal holes and at first glance surface roughness is similar for both technologies, which means that for precise dimensions parts have to be machined in places where precise fit is necessary. Benchmark tests have been made to find out if parts which are produced with metal additive manufacturing can be used to replace parts which are produced with casting technology. Most of the comparative tests have been made with GJS-400-15 grade which is one of the most popular cast iron grades. To compare mechanical properties samples have been produced using additive manufacturing and tested for tensile strength, hardness, surface roughness and microstructure and then the results have been compared with the samples produced with casting technology. In addition, both technologies have been compared in terms of the production time and production costs to see if additive manufacturing is competitive with the casting technology. The original paper has been written in the Latvian language as part of the Master Thesis within the framework of the production technology study programme at Riga Technical University.

Pathways to Commercial Success: Technologies and Products Supported by the Fuel Cell Technologies Program

Energy Technology Data Exchange (ETDEWEB)

Weakley, Steven A.

2012-09-28

The purpose of the project described in this report is to identify and document the commercial and emerging (projected to be commercialized within the next 3 years) hydrogen and fuel cell technologies and products that resulted from Department of Energy support through the Fuel Cell Technologies (FCT) Program in the Office of Energy Efficiency and Renewable Energy (EERE). Pacific Northwest National Laboratory (PNNL) undertook two efforts simultaneously to accomplish this project. The first effort was a patent search and analysis to identify patents related to hydrogen and fuel cells that are associated with FCT-funded projects (or projects conducted by DOE-EERE predecessor programs) and to ascertain the patents’ current status, as well as any commercial products that may have used the technology documented in the patent. The second effort was a series of interviews with current and past FCT personnel, a review of relevant program annual reports, and an examination of grants made under the Small Business Innovation Research and Small Business Technology Transfer Programs that are related to hydrogen and fuel cells.

Pathways to Commercial Success: Technologies and Products Supported by the Fuel Cell Technologies Program

Energy Technology Data Exchange (ETDEWEB)

Weakley, Steven A.; Brown, Scott A.

2011-09-29

The purpose of the project described in this report is to identify and document the commercial and emerging (projected to be commercialized within the next 3 years) hydrogen and fuel cell technologies and products that resulted from Department of Energy support through the Fuel Cell Technologies (FCT) Program in the Office of Energy Efficiency and Renewable Energy (EERE). To do this, Pacific Northwest National Laboratory (PNNL) undertook two efforts simultaneously to accomplish this project. The first effort was a patent search and analysis to identify hydrogen- and fuel-cell-related patents that are associated with FCT-funded projects (or projects conducted by DOE-EERE predecessor programs) and to ascertain the patents current status, as well as any commercial products that may have used the technology documented in the patent. The second effort was a series of interviews with current and past FCT personnel, a review of relevant program annual reports, and an examination of hydrogen- and fuel-cell-related grants made under the Small Business Innovation Research and Small Business Technology Transfer Programs, and within the FCT portfolio.

Nondestructive quality evaluation technology of agricultural products

International Nuclear Information System (INIS)

Noh, Sang Ha

1997-01-01

Quality evaluation of agricultural products has been interested to many researchers for many years and as the result, several nondestructive techniques and so many papers have been reported for quality evaluation of agricultural products. These nondestructive techniques are based on the detection of mechanical, optical, electrical, electro-magnetical, dielectric and vibrational properties of agricultural products that are well correlated with certain quality factors of the products such as color, shape, firmness, sugar content, external or internal defects, moisture content, etc. The sophistication of nondestructive methods has evolved rapidly with modem technologies. In this paper an emphasis was put on reviewing some of those papers and techniques which could be led to on-line measurement for practical use.

Impact of swine reproductive technologies on pig and global food production.

Science.gov (United States)

Knox, Robert V

2014-01-01

Reproductive technologies have dramatically changed the way pigs are raised for pork production in developed and developing countries. This has involved such areas as pigs produced/sow, more consistent pig flow to market, pig growth rate and feed efficiency, carcass yield and quality, labor efficiency, and pig health. Some reproductive technologies are in widespread use for commercial pork operations [Riesenbeck, Reprod Domest Anim 46:1-3, 2011] while others are in limited use in specific segments of the industry [Knox, Reprod Domest Anim 46:4-6, 2011]. Significant changes in the efficiency of pork production have occurred as a direct result of the use of reproductive technologies that were intended to improve the transfer of genes important for food production [Gerrits et al., Theriogenology 63:283-299, 2005]. While some technologies focused on the efficiency of gene transfer, others addressed fertility and labor issues. Among livestock species, pig reproductive efficiency appears to have achieved exceptionally high rates of performance (PigCHAMP 2011) [Benchmark 2011, Ames, IA, 12-16]. From the maternal side, this includes pigs born per litter, farrowing rate, as well as litters per sow per year. On the male side, boar fertility, sperm production, and sows served per sire have improved as well [Knox et al., Theriogenology, 70:1202-1208, 2008]. These shifts in the efficiency of swine fertility have resulted in the modern pig as one of the most efficient livestock species for global food production. These reproductive changes have predominantly occurred in developed countries, but data suggests transfer and adoption of these in developing countries as well (FAO STAT 2009; FAS 2006) [World pig meat production: food and agriculture organization of the United Nations, 2009; FAS, 2006) Worldwide Pork Production, 2006]. Technological advancements in swine reproduction have had profound effects on industry structure, production, efficiency, quality, and profitability. In

Development of Technology and Installation for Biohydrogen Production

Science.gov (United States)

Pridvizhkin, S. V.; Vyguzova, M. A.; Bazhenov, O. V.

2017-11-01

The article discusses the method for hydrogen production and the device this method application. The relevance of the use of renewable fuels and the positive impact of renewable energy on the environment and the economy is also considered. The presented technology relates to a method for hydrogen production from organic materials subject to anaerobic fermentation, such as the components of solid municipal waste, sewage sludge and agricultural enterprises wastes, sewage waste. The aim of the research is to develop an effective eco-friendly technology for hydrogen producing within an industrial project To achieve the goal, the following issues have been addressed in the course of the study: - development of the process schemes for hydrogen producing from organic materials; - development of the technology for hydrogen producing; - optimization of a biogas plant with the aim of hydrogen producing at one of the fermentation stages; - approbation of the research results. The article is recommended for engineers and innovators working on the renewable energy development issues.

Technology benefits resulting from accelerator production of tritium

International Nuclear Information System (INIS)

1998-01-01

One of the early and most dramatic uses of nuclear transformations was in development of the nuclear weapons that brought World War II to an end. Despite that difficult introduction, nuclear weapons technology has been used largely as a deterrent to war throughout the latter half of the twentieth century. The Accelerator Production of Tritium (APT) offers a clean, safe, and reliable means of producing the tritium (a heavy form of hydrogen) needed to maintain the nuclear deterrent. Tritium decays away naturally at a rate of about 5.5% per year; therefore, the tritium reservoirs in nuclear weapons must be periodically replenished. In recent years this has been accomplished by recycling tritium from weapons being retired from the stockpile. Although this strategy has served well since the last US tritium production reactor was shut down in 1988, a new tritium production capability will be required within ten years. Some benefits will result from direct utilization of some of the APT proton beam; others could result from advances in the technologies of particle accelerators and high power spallation targets. The APT may save thousands of lives through the production of medical isotopes, and it may contribute to solving the nation's problem in disposing of long-lived nuclear wastes. But the most significant benefit may come from advancing the technology, so that the great potential of accelerator applications can be realized during our lifetimes

International and intranational technological spillovers and productivity growth in China

OpenAIRE

Fu, Xiaolan; Gong, Yundan

2009-01-01

Technological spillovers from foreign direct investment (FDI) have been regarded as a major source of technical progress and productivity growth. This paper explores the role of international and intranational technological spillovers from FDI in technical change, efficiency improvement, and total factor productivity growth in Chinese manufacturing firms using a recent Chinese manufacturing firm-level panel data set over the 2001–05 period. International industry-specific research and develop...

Renewable energy technologies: enlargement of biofuels list and co-products from microalgae

Directory of Open Access Journals (Sweden)

Chernova Nadezhda I.

2017-01-01

Full Text Available Microalgae is a perspective feedstock for producing a wide variety of biofuels and co-products with high added value. An alternative to the traditional technology of biodiesel from algae by the transesterification is the technology of hydrothermal liquefaction (HTL. The article presents the results of promising strains screening and directed cultivation of microalgae for the processing by means of variety of technologies and production of valuable co-products. An algorithm for selecting suitable areas for industrial plantations of algae is presented.

Juntas de contracción en canales y depósitos de agua

Directory of Open Access Journals (Sweden)

Safránez, Carlos

1977-12-01

Full Text Available In view of the lack of Information available on the subject of contraction joints in canals and water tanks, and this being of great importance for water-tightness in this type of construction, the data considered as essential for planning joints has been presented in a systematic way. The most common of joints, and their characteristics, are mentioned and listed in accordance with their design and the procedure used for sealing them. The great importance of joint design and dimensions in relation to their performance has been highlighted. In the projects carried out, referring to this type of joint, we see there is a lack of common criteria regarding the minimum requisites and conditions which the joints must have in order to duly fulfill their mission. Experience has proven that the results obtained with contraction joints in canals and water tanks have not been totally satisfactory. In a large number of cases, bothersome and costly repairs were necessary to overercome deficiencies observed. In order to improve this situation, the different factors which influence the contraction joint's performance are discussed and they should be taken into account when planning the joints and their dimensions, in order to insure greatest efficiency.Vista la escasa información disponible sobre las juntas de contracción en canales y depósitos de agua, siendo indiscutible su gran importancia para la estanquidad de estas obras, se han expuesto, en forma sistemática, los datos considerados esenciales para enfocar debidamente el proyecto de las juntas. Se han indicado los tipos de juntas más corrientes, ordenadas de acuerdo con su diseño y con el procedimiento empleado para su sellado, señalando sus características. Se ha tratado de la importancia primordial del diseño y de las dimensiones de las juntas en relación con su comportamiento. En los proyectos de las juntas ejecutadas llama la atención la falta de una unidad de criterio sobre las

Evaluation of the efficiency of alternative enzyme production technologies

Energy Technology Data Exchange (ETDEWEB)

Albaek, M.O.

2012-03-15

Enzymes are used in an increasing number of industries. The application of enzymes is extending into the production of lignocellulosic ethanol in processes that economically can compete with fossil fuels. Since lignocellulosic ethanol is based on renewable resources it will have a positive impact on for example the emission of green house gasses. Cellulases and hemi-cellulases are used for enzymatic hydrolysis of pretreated lignocellulosic biomass, and fermentable sugars are released upon the enzymatic process. Even though many years of research has decreased the amount of enzyme needed in the process, the cost of enzymes is still considered a bottleneck in the economic feasibility of lignocellulose utilization. The purpose of this project was to investigate and compare different technologies for production of these enzymes. The filamentous fungus Trichoderma reesei is currently used for industrial production of cellulases and hemi-cellulases. The aim of the thesis was to use modeling tools to identify alternative technologies that have higher energy or raw material efficiency than the current technology. The enzyme production by T. reesei was conducted as an aerobic fed-batch fermentation. The process was carried out in pilot scale stirred tank reactors and based on a range of different process conditions, a process model was constructed which satisfactory described the course of fermentation. The process was governed by the rate limiting mass transfer of oxygen from the gas to the liquid phase. During fermentation, filamentous growth of the fungus lead to increased viscosity which hindered mass transfer. These mechanisms were described by a viscosity model based on the biomass concentration of the fermentation broth and a mass transfer correlation that incorporated a viscosity term. An analysis of the uncertainty and sensitivity of the model indicated the biological parameters to be responsible for most of the model uncertainty. A number of alternative

DEVELOPMENT OF TECHNOLOGY AND REGULATORY DOCUMENTATION ON PROCESSED BROCCOLI PRODUCT

Directory of Open Access Journals (Sweden)

T. I. Kryachko

2017-01-01

Full Text Available The aim of the present investigation was development of an efficient technology for obtaining powders from fresh broccoli; determination of the possibility of using domestic production of broccoli as an import-substituting product; development of regulatory documentation for broccoli powders for the food industry. The research was carried out jointly with the representatives of the Federal Scientific cen-ter of vegetable production on an experimental basis in 2016. The domestic Tonus variety of broccoli (Federal Scientific center of vegetable production and the Maraton F1 hybrid (France, differing in appearance, vegetative period, biochemical and physical characteristics were chosen. Technology of broccoli powder production from domestic and imported products was developed using two methods of drying convection and lyophilization. The gentle drying conditions of broccoli freeze drying compared to convective drying technology provided higher content of both vitamin C and polyphenols in the final powder. Comparative studies of organoleptic and physico-chemical properties of powders obtained from domestic and imported broccoli demonstrated close quality parameters, indicating the possibility of effective domestic broccoli utilization and import substitution. For the first time in the Russian Federation, the "Organization Standard" was developed for regulation of the quality parameters of broccoli powders intended for use in the food industry.

Development of fission Mo-99 production technology

Energy Technology Data Exchange (ETDEWEB)

Park, Jin Ho; Choung, W. M.; Lee, K. I. and others

2001-05-01

This R and D project is planed to supply domestic demands of Mo-99 through fission route, and consequently this project will be expected to rise up utilization of HANARO and KAERI's capability for marketing extension into domestic and oversea radiopharmaceutical market. HEU and LEU target types are decided and designed for fission Mo-99 production in domestic. Experimental study of target fabrication technology was performed and developed processing equipments. And conceptual design of target loading/unloading in/from HANARO device are performed. Tracer test of Mo-99 separation and purification process was performed, test results reach to Mo-99 recovery yield above 80% and decontamination factor above 1600. Combined Mo-99 separation and purification process was decided for hot test scheduled from next year, and performance test was performed. Conceptual design for modification of existing hot cell for fission Mo-99 production facility was performed and will be used for detail design. Assumption for the comparison of LEU and HEU target in fission Mo-99 production process were suggested and compared of merits and demerits in view of fabrication technology and economy feasibility.

Development of fission Mo-99 production technology

International Nuclear Information System (INIS)

Park, Jin Ho; Choung, W. M.; Lee, K. I. and others

2001-05-01

This R and D project is planed to supply domestic demands of Mo-99 through fission route, and consequently this project will be expected to rise up utilization of HANARO and KAERI's capability for marketing extension into domestic and oversea radiopharmaceutical market. HEU and LEU target types are decided and designed for fission Mo-99 production in domestic. Experimental study of target fabrication technology was performed and developed processing equipments. And conceptual design of target loading/unloading in/from HANARO device are performed. Tracer test of Mo-99 separation and purification process was performed, test results reach to Mo-99 recovery yield above 80% and decontamination factor above 1600. Combined Mo-99 separation and purification process was decided for hot test scheduled from next year, and performance test was performed. Conceptual design for modification of existing hot cell for fission Mo-99 production facility was performed and will be used for detail design. Assumption for the comparison of LEU and HEU target in fission Mo-99 production process were suggested and compared of merits and demerits in view of fabrication technology and economy feasibility

The True Seed of Shalott (TSS Technology Production on Trisula Variety in East Java

Directory of Open Access Journals (Sweden)

P.E.R. Prahardini

2018-01-01

Full Text Available One of the onion increasing production problem is the lack of quality seeds availability. In order to provide high quality seeds of high yield and available throughout the year, an improvement of seed technology is required. One of the developing onion seed technologies is onion seeding through TSS (true seed of shallot. TSS technology development is expected to overcome the problem of onion seeding in Indonesia. East Java as one of the production centers of onion requires in developing onion seeding technology through TSS. This study aims to apply and develop TSS production technology using Trisula varieties which has been done from April to December 2016 in Tulungrejo village, Bumiaji district, Batu. The result of TSS production technology implementation indicates that Trisula variety is able to produce 110,5 kg TSS. Based on its agro-ecology, Batu area has the potential as the center of TSS production in East Java. Keywords: Onion, Technology, Trisula Varieties, True Seed of Shalot

(Fuel, fission product, and graphite technology)

Energy Technology Data Exchange (ETDEWEB)

Stansfield, O.M.

1990-07-25

Travel to the Forschungszentrum (KFA) -- Juelich described in this report was for the purpose of participating in the annual meeting of subprogram managers for the US/DOE Umbrella Agreement for Fuel, Fission Product, and Graphite Technology. At this meeting the highlights of the cooperative exchange were reviewed for the time period June 1989 through June 1990. The program continues to contribute technology in an effective way for both countries. Revision 15 of the Subprogram Plan will be issued as a result of the meeting. There was interest expressed by KFA management in the level of support received from the NPR program and in potential participation in the COMEDIE loop experiment being conducted at the CEA.

Pathways to Commercial Success: Technologies and Products Supported by the Fuel Cell Technologies Office - 2013

Energy Technology Data Exchange (ETDEWEB)

none,

2014-04-30

This FY 2013 report updates the results of an effort to identify and characterize commercial and near-commercial (emerging) technologies and products that benefited from the support of the Fuel Cell Technologies Office and its predecessor programs within DOE's Office of Energy Efficiency and Renewable Energy.

Pathways to Commercial Success: Technologies and Products Supported by the Fuel Cell Technologies Office - 2014

Energy Technology Data Exchange (ETDEWEB)

None, None

2015-02-01

This FY 2014 report updates the results of an effort to identify and characterize commercial and near-commercial (emerging) technologies and products that benefited from the support of the Fuel Cell Technologies Office and its predecessor programs within DOE's Office of Energy Efficiency and Renewable Energy.

Pathways to Commercial Success. Technologies and Products Supported by the Fuel Cell Technologies Program - 2012

Energy Technology Data Exchange (ETDEWEB)

none,

2012-09-01

This FY 2012 report updates the results of an effort to identify and characterize commercial and near-commercial (emerging) technologies and products that benefited from the support of the Fuel Cell Technologies Program and its predecessor programs within DOE's Office of Energy Efficiency and Renewable Energy.

Technology for recovery of by-products

International Nuclear Information System (INIS)

Van Tuy, H.H.

1983-01-01

Products of conventional nuclear fuel processing plants are uranium and plutonium, and any other recovered material is considered to be a by-product. Some by-products have been recovered from past nuclear fuel processing operations, either as a normal mode of operation or by special campaigns. Routing recovery over an extended period has been limited to neptunium, but extended campaigns were used at Hanford to recover strontium for radioisotope thermoelectric generators. Krypton is recovered at Idaho Chemical Processing Plant on a campaign basis, and isotope separation of krypton is done at Oak Ridge National Laboratory. Past campaigns at Hanford PUREX have recovered cesium, promethium, amercium, cerium, and technetium. Past by-product recovery efforts were usually severely constrained by the status of flowsheet development and availability of existing facilities at the time decisions wee made to recover the by-products. Additional processes were developed to accommodate other unit operations and in response to changes in waste management objectives or user requirements. Now an impressive variety of recovery technology is available for most potential by-products, with varying degrees of demonstration under conditions which satisfy today's environmental protection and waste management constraints

Micromachining technology for thermal ink-jet products

Science.gov (United States)

Verdonckt-Vandebroek, Sophie

1997-09-01

This paper reviews recent trends and evolutions in the low- end color printing market which is currently dominated by thermal inkjet (TIJ) based products. Micro electromechanical systems technology has been an enabler for the unprecedented cost/performance ratio of these printing products. The generic TIJ operating principles are based on an intimate blend of thermodynamics, fluid dynamics and LSI electronics. The key principles and design issues are outlined and the fabrication of TIJ printheads illustrated with an implementation by the Xerox Corporation.

Projection display technology and product trends

Science.gov (United States)

Kahn, Frederic J.

1999-05-01

Major technology and market trends that could generate a 20 billion dollar electronic projector market by 2010 are reviewed in the perspective of recent product introductions. A log linear analysis shows that the light outputs of benchmark transportable data video projectors have increased at a rate of almost 90 percent per year since 1993. The list prices of these same projectors have decreased at a rate of over 40 percent per year. The tradeoffs of light output vs. resolution and weight are illustrated. Recent trends in projector efficacy vs. year are discussed. Lumen output per dollar of list price is shown to be a useful market metric. Continued technical advances and innovations including higher throughput light valve technologies with integrated drivers, brighter light source, field sequential color, integrated- and micro-optical components, and aerospace materials are likely to sustain these trends. The new technologies will enable projection displays for entertainment and computer applications with unprecedented levels of performance, compactness, and cost-effectiveness.

Wood chip production technology and costs for fuel in Namibia

Energy Technology Data Exchange (ETDEWEB)

Leinonen, A.

2007-12-15

This work has been done in the project where the main target is to evaluate the technology and economy to use bush biomass for power production in Namibia. The project has been financed by the Ministry for Foreign Affairs of Finland and the Ministry of Agriculture, Water and Forestry of the Republic of Namibia. The target of this study is to calculate the production costs of bush chips at the power plant using the current production technology and to look possibilities to develop production technology in order to mechanize production technology and to decrease the production costs. The wood production costs are used in feasibility studies, in which the technology and economy of utilization of wood chips for power generation in 5, 10 and 20 MW electric power plants and for power generation in Van Eck coal fired power plant in Windhoek are evaluated. Field tests were made at Cheetah Conservation Farm (CCF) in Otjiwarongo region. CCF is producing wood chips for briquette factory in Otjiwarongo. In the field tests it has been gathered information about this CCF semi-mechanized wood chip production technology. Also new machines for bush biomass chip production have been tested. A new mechanized production chain has been designed on the basis of this information. The production costs for the CCF semi-mechanized and the new production chain have been calculated. The target in the moisture content to produce wood chips for energy is 20 w-%. In the semi-mechanized wood chip production chain the work is done partly manually, and the supply chain is organized into crews of 4.8 men. The production chain consists of manual felling and compiling, drying, chipping with mobile chipper and manual feeding and road transport by a tractor with two trailers. The CCF production chain works well. The chipping and road transport productivity in the semimechanized production chain is low. New production machines, such as chainsaw, brush cutter, lawn mover type cutter, rotator saw in skid

Advances in Mammalian Cell Line Development Technologies for Recombinant Protein Production

Directory of Open Access Journals (Sweden)

Say Kong Ng

2013-04-01

Full Text Available From 2006 to 2011, an average of 15 novel recombinant protein therapeutics have been approved by US Food and Drug Administration (FDA annually. In addition, the expiration of blockbuster biologics has also spurred the emergence of biosimilars. The increasing numbers of innovator biologic products and biosimilars have thus fuelled the demand of production cell lines with high productivity. Currently, mammalian cell line development technologies used by most biopharmaceutical companies are based on either the methotrexate (MTX amplification technology or the glutamine synthetase (GS system. With both systems, the cell clones obtained are highly heterogeneous, as a result of random genome integration by the gene of interest and the gene amplification process. Consequently, large numbers of cell clones have to be screened to identify rare stable high producer cell clones. As such, the cell line development process typically requires 6 to 12 months and is a time, capital and labour intensive process. This article reviews established advances in protein expression and clone screening which are the core technologies in mammalian cell line development. Advancements in these component technologies are vital to improve the speed and efficiency of generating robust and highly productive cell line for large scale production of protein therapeutics.

Utilization of cocoyam production technologies among women ...

African Journals Online (AJOL)

The study analysed utilization of improved cocoyam production technologies among women in Abia State, Nigeria. A multistage random sampling technique was used to select sixty (60) women. Data for the study were collected using a structured questionnaire and analysed with descriptive statistics and inferential statistics ...

Dielectrophoresis microsystem with integrated flow cytometers for on-line monitoring of sorting efficiency

DEFF Research Database (Denmark)

Wang, Zhenyu; Hansen, Ole; Petersen, Peter Kalsen

2006-01-01

Dielectrophoresis (DEP) and flow cytometry are powerful technologies and widely applied in microfluidic systems for handling and measuring cells and particles. Here, we present a novel microchip with a DEP selective filter integrated with two microchip flow cytometers (FCs) for on-line monitoring...... of cell sorting processes. On the microchip, the DEP filter is integrated in a microfluidic channel network to sort yeast cells by positive DER The two FCs detection windows are set upstream and downstream of the DEP filter. When a cell passes through the detection windows, the light scattered by the cell...

OPTIMIZATION OF THE TECHNOLOGICAL PROCESS OF THE FERROCHROME PRODUCTION OUT OF WASTE OF TANNING PRODUCTION

Directory of Open Access Journals (Sweden)

O. S. Komarov

2004-01-01

Full Text Available The article touches upon the solving of the actual problem — production in conditions of Belarus of ferrochrome of the leather production wastes, that allows to solve several technological problems and to reduse import of expensive ferroallows.

Mobile Technology and CAD Technology Integration in Teaching Architectural Design Process for Producing Creative Product

Science.gov (United States)

Bin Hassan, Isham Shah; Ismail, Mohd Arif; Mustafa, Ramlee

2011-01-01

The purpose of this research is to examine the effect of integrating the mobile and CAD technology on teaching architectural design process for Malaysian polytechnic architectural students in producing a creative product. The website is set up based on Caroll's minimal theory, while mobile and CAD technology integration is based on Brown and…

Elaboration of the technology of forming a conical product of sheet metal

Directory of Open Access Journals (Sweden)

W. Matysiak

2010-01-01

Full Text Available The work presents a general knowledge about spinning draw pieces of sheets, one of multi-operational processes of spinning a sheet metal conical product without machining. The objective of the work was to elaborate both the technology of forming conical products of sheet metal and execution of technological tests as well as to determine the technological parameters for the process of spinning a conical insert. As a result of the investigations, the products with improved mechanical properties, stricter execution tolerance and low roughness have been obtained. The series of 200 prototype conical inserts for the shipbuilding industry have been made.

Factors driving and restraining adoption of Automation technologies in Swedish wood product industry.

OpenAIRE

Mapulanga, Mwanza; Saladi, Praveen

2016-01-01

Swedish wood product industry contributes significantly to the economy of the country. This industry adds more value to the sawn timber produced in order to manufacture different wooden products. Companies in Swedish wood product industry are presently seen as underdeveloped in terms of investments and developments in automation technologies. Automation technologies are seen by companies as a solution for improving productivity, product quality, manufacturing cost reduction and ultimately imp...

Impacts of reproductive technologies on beef production in the United States.

Science.gov (United States)

Dahlen, Carl; Larson, Jamie; Lamb, G Cliff

2014-01-01

Estimations of world population growth indicate that by the year 2050 we will reach nine billion habitants on earth. These estimates impose a tremendous challenge in the current agricultural systems as food supply will need to increase by 100 % in the next 40 years (Food and Agriculture Organization of the United Nations 2009). Beef will be a primary protein source that will assist in meeting the requirements for a portion of the protein in diets of this expanding global populace. Beef is a high-quality protein that contains all essential amino acids for the human body and also contains additional essential nutrients such as iron, zinc, B vitamins, riboflavin, selenium, choline, and conjugated linoleic acid (CLA). Adopting reproductive technologies at greater rates than currently used is a viable method to dramatically enhance production efficiency of beef cattle enterprises.Artificial insemination (AI), estrous synchronization and fixed-time AI (TAI), semen and embryo cryopreservation, multiple ovulation and embryo transfer (MOET), in vitro fertilization, sex determination of sperm or embryos, and nuclear transfer are technologies that are used to enhance the production efficiency of beef operations. In many cases, the development of these technologies is responsible for significant changes to traditional livestock production practices. However, adoption of these technologies appears to has not grown at the same rate in the United States as other formidable beef producing nations. For example, sales of beef semen for AI increased from 3.3 to 11.9 million units between 1993 and 2011 in Brazil, whereas that in the United States has increased from 2.9 to 3.8 million units during the same period. The significant increases in adoption of reproductive technologies in developing countries is likely as a result of the development of practical estrous synchronization and TAI systems that have allowed beef producers the opportunity to eliminate detection of estrus in their

Technology diffusion of energy-related products in residential markets

Energy Technology Data Exchange (ETDEWEB)

Davis, L.J.; Bruneau, C.L.

1987-05-01

Acceptance of energy-related technologies by end residential consumers, manufacturers of energy-related products, and other influential intermediate markets such as builders will influence the potential for market penetration of innovative energy-related technologies developed by the Department of Energy, Office of Building and Community Systems (OBCS). In this report, Pacific Northwest Laboratory reviewed the available information on technology adoption, diffusion, and decision-making processes to provide OBCS with a background and understanding of the type of research that has previously been conducted on this topic. Insight was gained as to the potential decision-making criteria and motivating factors that influence the decision-maker(s) selection of new technologies, and some of the barriers to technology adoption faced by potential markets for OBCS technologies.

Printing versus coating - What will be the future production technology for printed electronics?

Energy Technology Data Exchange (ETDEWEB)

Glawe, Andrea; Eggerath, Daniel; Schäfer, Frank [KROENERT GmbH and Co KG, Schuetzenstrasse 105, 22761 Hamburg (Germany)

2015-02-17

The market of Large Area Organic Printed Electronics is developing rapidly to increase efficiency and quality as well as to lower costs further. Applications for OPV, OLED, RFID and compact Printed Electronic systems are increasing. In order to make the final products more affordable, but at the same time highly accurate, Roll to Roll (R2R) production on flexible transparent polymer substrates is the way forward. There are numerous printing and coating technologies suitable depending on the design, the product application and the chemical process technology. Mainly the product design (size, pattern, repeatability) defines the application technology.

Technology and quality of Skorup - traditional Montenegrin dairy product

Directory of Open Access Journals (Sweden)

Slavko Mirecki

2017-01-01

Full Text Available Skorup is Montenegrin traditional dairy product. Its main characteristics are extremely high content of milk fat and centuries-old technology. Due to the specific technology, high nutritional value and its historical heritage, Skorup deserves to be labelled as product with protected designation of origin (PDO or protected geographical indication (PGI. The purpose of this study was to collect the most important data about Skorup technology and quality and to launch the process of protection. The chemical quality of raw milk was analysed using IR spectrophotometry, the number of somatic cells and total bacteria count by flow cytometry, and Skorup composition by FTIR spectrophotometry. The presence of Escherichia coli, coagulase positive staphylococci and aerobic mesophilic bacteria in Skorup was detected by standard broth base methods. All Skorup samples contained more than 80 % of fat in dry matter, more than 70 % dry matter, approximately 60 % milk fat and 6 % proteins. The sensory characteristics of all samples were excellent, and according to sensory classification, they belong to the highest classes (I and IA. However, five out of twenty samples did not meet requirements for hygienic quality, which implies the urgent need for improvement of hygiene conditions during its production.

Wastewater recycling technology for fermentation in polyunsaturated fatty acid production.

Science.gov (United States)

Song, Xiaojin; Ma, Zengxin; Tan, Yanzhen; Zhang, Huidan; Cui, Qiu

2017-07-01

To reduce fermentation-associated wastewater discharge and the cost of wastewater treatment, which further reduces the total cost of DHA and ARA production, this study first analyzed the composition of wastewater from Aurantiochytrium (DHA) and Mortierella alpina (ARA) fermentation, after which wastewater recycling technology for these fermentation processes was developed. No negative effects of DHA and ARA production were observed when the two fermentation wastewater methods were cross-recycled. DHA and ARA yields were significantly inhibited when the wastewater from the fermentation process was directly reused. In 5-L fed-batch fermentation experiments, using this cross-recycle technology, the DHA and ARA yields were 30.4 and 5.13gL -1 , respectively, with no significant changes (P>0.05) compared to the control group, and the water consumption was reduced by half compared to the traditional process. Therefore, this technology has great potential in industrial fermentation for polyunsaturated fatty acid production. Copyright © 2017 Elsevier Ltd. All rights reserved.

Depósito de agua 1.500 m3 en Getafe – España

Directory of Open Access Journals (Sweden)

del Pozo, Florencio

1970-02-01

Full Text Available Due to the redevelopment of the activities of the proprietor firm, and the consequent need to modify and extend the cooling water circuit of their plant, it has been necessary to construct an elevated water tank, with a minimum height of 30 m above the ground. This tank, whose description is given, is made of prestressed concrete, has no roofing surface, and its detailed characteristics as well as the method of construction are also briefly and clearly discussed in this article.Por exigencias y reestructuración de la empresa propietaria, que ha orientado en forma nueva la producción de sus talleres, ha sido necesario modificar y ampliar todo el circuito de agua de refrigeración, lo que ha obligado a construir un depósito de agua elevado, con cota mínima de + 30 m, de hormigón pretensado y sin cubierta, cuyas características, Ba cálculo y proceso constructivo se describen somera, pero claramente, en este artículo.

The keyhole GTAW technology: a new welding technology joining quality and productivity

International Nuclear Information System (INIS)

Le Port, P.; Laugier, M.; Scandella, F.; Lawrjaniec, D.; Boucher, Ch.

2006-01-01

This paper is a literature review regarding the keyhole GTAW technology, which has been developed and first used for industrial applications in Australia. The process enables single pass welding of a wide range of materials including stainless steels, titanium and nickel alloys, up to 12 mm thick. Process parameters (welding current, arc voltage, travel speed, the type of shielding gas and tungsten electrode dimensions) are discussed with regards to keyhole formation and stability. A comparison between standard GTAW and keyhole GTAW is provided for the welding of 12 mm thick stainless steel and titanium, showing the substantial increase in productivity that can be achieved with this new technology. Institut de Soudure has taken part in a European project aimed at assessing the possibilities of the keyhole GTAW technology. (authors)

Straw for energy production. Technology - Environment - Economy

Energy Technology Data Exchange (ETDEWEB)

Nikolaisen, L.; Nielsen, C.; Larsen, M.G.; Nielsen, V.; Zielke, U.; Kristensen, J.K.; Holm-Christensen, B.

1998-12-31

`Straw for Energy Production`, second edition, provides a readily accessible background information of special relevance to the use of straw in the Danish energy supply. Technical, environmental, and economic aspects are described in respect of boiler plants for farms, district heating plants, and combined heat and power plants (CHP). The individual sections deal with both well-known, tested technology and the most recent advances in the field of CHP production. This publication is designed with the purpose of reaching the largest possible numbers of people and so adapted that it provides a valuable aid and gives the non-professional, general reader a thorough knowledge of the subject. `Straw for Energy Production` is also available in German and Danish. (au)

Biogas Production: Microbiology and Technology.

Science.gov (United States)

Schnürer, Anna

Biogas, containing energy-rich methane, is produced by microbial decomposition of organic material under anaerobic conditions. Under controlled conditions, this process can be used for the production of energy and a nutrient-rich residue suitable for use as a fertilising agent. The biogas can be used for production of heat, electricity or vehicle fuel. Different substrates can be used in the process and, depending on substrate character, various reactor technologies are available. The microbiological process leading to methane production is complex and involves many different types of microorganisms, often operating in close relationships because of the limited amount of energy available for growth. The microbial community structure is shaped by the incoming material, but also by operating parameters such as process temperature. Factors leading to an imbalance in the microbial community can result in process instability or even complete process failure. To ensure stable operation, different key parameters, such as levels of degradation intermediates and gas quality, are often monitored. Despite the fact that the anaerobic digestion process has long been used for industrial production of biogas, many questions need still to be resolved to achieve optimal management and gas yields and to exploit the great energy and nutrient potential available in waste material. This chapter discusses the different aspects that need to be taken into consideration to achieve optimal degradation and gas production, with particular focus on operation management and microbiology.

Developing Technology Products - A Physicist's Perspective

Science.gov (United States)

Burka, Michael

2014-03-01

There are many physicists working in the industrial sector. We rarely have the word physicist in our job title; we are far more commonly called engineers or scientists. But, we are physicists, and we succeed because our training in physics has given us the habits of mind and the technical skills that one needs to solve complex technical challenges. This talk will explore the transition from physics research to technology product development using examples from my own career, first as a postdoctoral fellow and research scientist on the LIGO project, and then developing products in the spectroscopy, telecommunications, and medical device industries. Approaches to identifying and pursuing opportunities in industry will be discussed.

The impact of information technology on productivity using structural equations technique in Iran Behnoush Company

Directory of Open Access Journals (Sweden)

Mina Beig

2012-08-01

Full Text Available Information technology plays an important role on increasing productivity in many organizations. The primary objective of the present survey is to study the impact of information technology on productivity and find a positive and significant relationship between these two factors. Structural equations technique and LISREL software are used for analysis of the questionnaires distributed among managers and some employees of Iran Behnoush Company. Organizations try to improve their performance by investment in information technology. However, many of the previous studies indicate insignificance of the impact of information technology on productivity of the organizations. The present survey studies the impact of information technology on organizations' productivity through the collected data from the above company. Results confirm existence of a positive relationship between information technology and productivity.

A review on the process technology for Mo-99 production

Energy Technology Data Exchange (ETDEWEB)

Park, Jin Hoh; Yoo, Jae Hyung; Jung, Won Myung; Lee, Kyoo Il; Woo, Moon Sik; Hwang, Doo Sung; Kim, Yun Koo [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

1994-07-01

Tc-99m is most frequently used in nuclear medical diagnostics because of its favourable nuclear properties and reasonable prices, and the demand of Tc-99m, is on the increase recently. Mo-99, the parent radionuclide of Tc-99m, is the only source of Tc-99m. This review described overall aspects of process technologies for Mo-99 production. Firstly, the chemical, physical and radioactive properties of Tc-99m, Mo-99 were examined to understand Mo-99 separation process. Also, the technology for Mo-99 production with both the neutron capture and nuclear fission method were examined. But the neutron capture method was scarcely used for large production of Mo-99 because of its low specific activity and high production cost. This review also described mainly process technologies in the nuclear fission method, fabrication and condition for irradiation of targets, transport and dissolution of targets irradiated, separation and purification of Mo-99, etc. Especially, for Mo-99 separation and purification process, the characteristics, merits and demerits of various processes, which have been developed in a few countries, were examined and analyzed. 30 figs., 16 tabs., 60 refs. (Author).

Depósito de TiN sobre herramientas de corte para uso industrial

Directory of Open Access Journals (Sweden)

Auger, M. A.

2004-04-01

Full Text Available TiN coatings on stainless steel blades for glass fibre cutting have been investigated in this work. The aim was to improve their mechanical properties and increase the tool time life, decreasing in this way the production stops. Reactive magnetron sputtering has been the deposition technique. TiN films chemical composition has been determined by AES (Auger Electron Spectroscopy, RBS (Rutherford Backscattering Spectroscopy and XANES (X-Ray Spectroscopy Near the Absorption Edge, and it has been correlated to the gas mixture composition in the vacuum chamber. Crystalline structure has been determined by X-Ray Diffraction, and the films morphology has been observed by SEM (Scanning Electron Microscopy. The hardness coating has been extracted from nanoindentation measurements, giving a 21.54±1.04 GPa hardness value, typical for TiN in the literature. Factory proofs for coated cutting blades show a 67% lifetime increase.

En este trabajo se han estudiado láminas de TiN crecidas sobre cuchillas de acero inoxidable empleadas en el corte de fibra de vidrio, para mejorar sus propiedades mecánicas y aumentar el tiempo de vida de la herramienta, reduciendo de este modo las paradas de producción. La técnica de depósito utilizada ha sido la de sputtering magnetrón reactivo. La composición química de las capas de TiN ha sido determinada mediante medidas de Espectroscopía Auger, RBS (Rutherford Backscattering Spectroscopy y XANES (X-Ray Spectroscopy Near the Absorption Edge y se ha relacionado con la composición de la mezcla gaseosa presente en la cámara de reacción. La estructura cristalina se ha determinado mediante Difracción de Rayos X, y mediante la técnica de SEM (Scanning Electron Microscopy se ha observado la morfología de las capas. La dureza del recubrimiento se ha calculado a partir de medidas de nanoindentación, obteniéndose un valor de 21.54±1.04 GPa, típico en la literatura para el TiN. Los resultados de la prueba en f

Additive manufacturing of metals the technology, materials, design and production

CERN Document Server

Yang, Li; Baughman, Brian; Godfrey, Donald; Medina, Francisco; Menon, Mamballykalathil; Wiener, Soeren

2017-01-01

This book offers a unique guide to the three-dimensional (3D) printing of metals. It covers various aspects of additive, subtractive, and joining processes used to form three-dimensional parts with applications ranging from prototyping to production. Examining a variety of manufacturing technologies and their ability to produce both prototypes and functional production-quality parts, the individual chapters address metal components and discuss some of the important research challenges associated with the use of these technologies. As well as exploring the latest technologies currently under development, the book features unique sections on electron beam melting technology, material lifting, and the importance this science has in the engineering context. Presenting unique real-life case studies from industry, this book is also the first to offer the perspective of engineers who work in the field of aerospace and transportation systems, and who design components and manufacturing networks. Written by the leadin...

Innovative applications of technology for nuclear power plant productivity improvements

International Nuclear Information System (INIS)

Naser, J. A.

2012-01-01

The nuclear power industry in several countries is concerned about the ability to maintain high plant performance levels due to aging and obsolescence, knowledge drain, fewer plant staff, and new requirements and commitments. Current plant operations are labor-intensive due to the vast number of operational and support activities required by commonly used technology in most plants. These concerns increase as plants extend their operating life. In addition, there is the goal to further improve performance while reducing human errors and increasingly focus on reducing operations and maintenance costs. New plants are expected to perform more productively than current plants. In order to achieve and increase high productivity, it is necessary to look at innovative applications of modern technologies and new concepts of operation. The Electric Power Research Inst. is exploring and demonstrating modern technologies that enable cost-effectively maintaining current performance levels and shifts to even higher performance levels, as well as provide tools for high performance in new plants. Several modern technologies being explored can provide multiple benefits for a wide range of applications. Examples of these technologies include simulation, visualization, automation, human cognitive engineering, and information and communications technologies. Some applications using modern technologies are described. (authors)

Analysis on Pollution Factors in Asparagus Production and Research on Safety Production Technology

OpenAIRE

Ma, Liping; Hao, Bianqing; Qiao, Xiongwu

2013-01-01

Based on the analysis on the infection degree, infection law and influencing factors of the main diseases on asparagus and the analysis on the pollution factors in asparagus production such as blind pesticide use, atmospheric pollution and acid rain, the pollution of soil and fertilizer, this article proposes asparagus safety production technologies which include the selection of disease-resistant variety and suitable planting field, scientific and reasonable disease control, balanced fertili...

Technology and Products Supporting E-learning by Knowledge Management - A Review

Directory of Open Access Journals (Sweden)

Ying Wang

2014-06-01

Full Text Available Abstract—Knowledge management is supported by many strategies such as business intelligence, collaboration, document management and e-learning. With the development of modern information technology and the increases of demand for building and maintaining dynamic capabilities, E-learning has played more and more important role of all the technologies in the supporting knowledge management. A successful e-learning system is supported by many critical success factors and technology has become the key factor among these factors. Consequently, the review of basic technologies and corresponding products that support e-learning will be in favor of further study on e-learning. From perspective of knowledge management, this paper makes a review about the relationship between e-learning and knowledge management and advanced technologies and corresponding products that support the design and operation of e-learning system. At the end of this paper, we analyze the main trends of the development direction of e-learning technology.

Secondary Products (Markets, Competition, and Technological Improvements)

Science.gov (United States)

Philip A. Araman

1988-01-01

Competitiveness, imports, exports, and technological improvements--these are issues facing secondary wood-product manufacturers. The major problems focus on increasing foreign imports and the inability of U.S. industries to repell the imports. How and where should we, as researchers, allocate our efforts to enhance the competitiveness of secondary forest industries in...

Pathways to Commercial Success: Technologies and Products Supported by the Fuel Cell Technologies Office - 2015

Energy Technology Data Exchange (ETDEWEB)

None, None

2016-01-08

This FY 2015 report updates the results of an effort to identify and document the commercial and emerging (projected to be commercialized within the next 3 to 5 years) hydrogen and fuel cell technologies and products that resulted from U.S. Department of Energy support through the Fuel Cell Technologies Office in the Office of Energy Efficiency and Renewable Energy.

THE IMPROVEMENT OF TECHNOLOGY PRODUCTION OF BITUMEN FOR THE ROAD PAVING

Directory of Open Access Journals (Sweden)

N. A. Belova

2016-01-01

Full Text Available Aim. The oil (artificial bitumens, got by conversion of the oil cheese, are broadly used in the road construction. The track record of the development road covering, studies, bound with improvement their characteristic and development of the competitions among technology is presented in this article.Methods. Nowdays the modern developments in the field of production bitumen road marks are implemented using such technological-go acceptance as chemical actuated heavy oil cheese, which principles are based on regulation of the energybetween molecular interactions and optimization their dimensionality, allowing raise quality bitumen.Results. Adjusting the depth of recovery of the oxidized product, it is possible to obtain different composition, plasticity and heat resistance of the bitumen. The residual bitumen obtained by two-stage oxidation with subsequent vacuum distillation of the oxidized product comply with GOST 60/90. Vacuum gas oil in the production of residual bitumen corresponds to the motor fuel for marine installations.Conclusion. Today, the bitumen production leaves on positions packed-valuable segment oil processing industry. The Main customer roads - a state. Herewith important role as ideologues of the development of the culture road construction plays the Federal road agency, supporting developing competition amongst leading technology. Introduction new technology at conversion remaining component oils, founded on do active cheese to account physical and chemical of the influence, with using the modern equipment, including equipment, using subject to influence effects, ultrasonic and electro-magnetic fields, and others, allows to get the qualitative road bitumens from majority of the oils, scanned earlier unfit for production bitumen.

Value Creation, Appropriation, and Product Design Strategies in Technology Ecosystems: Three Essays on the Role of Complementary Technologies

Science.gov (United States)

Miller, Cameron Dee

2017-01-01

Firms are often embedded in a technology ecosystem comprised of complementary technologies that span multiple product markets. In this dissertation, I examine how complementarity between the firm's technologies influences its strategies to create and appropriate value in the ecosystem. I investigate this overarching question in two contexts:…

Inflammation-Related Effects of Diesel Engine Exhaust Particles: Studies on Lung Cells In Vitro

Science.gov (United States)

Schwarze, P. E.; Totlandsdal, A. I.; Låg, M.; Refsnes, M.; Holme, J. A.; Øvrevik, J.

2013-01-01

Diesel exhaust and its particles (DEP) have been under scrutiny for health effects in humans. In the development of these effects inflammation is regarded as a key process. Overall, in vitro studies report similar DEP-induced changes in markers of inflammation, including cytokines and chemokines, as studies in vivo. In vitro studies suggest that soluble extracts of DEP have the greatest impact on the expression and release of proinflammatory markers. Main DEP mediators of effects have still not been identified and are difficult to find, as fuel and engine technology developments lead to continuously altered characteristics of emissions. Involved mechanisms remain somewhat unclear. DEP extracts appear to comprise components that are able to activate various membrane and cytosolic receptors. Through interactions with receptors, ion channels, and phosphorylation enzymes, molecules in the particle extract will trigger various cell signaling pathways that may lead to the release of inflammatory markers directly or indirectly by causing cell death. In vitro studies represent a fast and convenient system which may have implications for technology development. Furthermore, knowledge regarding how particles elicit their effects may contribute to understanding of DEP-induced health effects in vivo, with possible implications for identifying susceptible groups of people and effect biomarkers. PMID:23509760

Caracterização faciológica e estratigráfica dos depósitos Flúvio-eólicos da Formação Pirambóia, permo-triássico da Bacia do Paraná, Oeste do Rio Grande

OpenAIRE

Adriana Damiani Rodrigues

2015-01-01

O objetivo principal desta dissertação é elaborar um arcabouço faciológico e estratigráfico para os depósitos flúvio-eólicos da Formação Pirambóia, Permo-Triássico da Bacia do Paraná, no bloco oeste do Estado do Rio Grande do Sul. O entendimento dos processos controladores da sedimentação e a relação entre os depósitos fluviais e eólicos foram fundamentais para estabelecer um modelo estratigráfico de alta resolução. A análise faciológica determinou 10 litofácies que foram agrupadas em seis as...

A User Centered Approach to Developing Emergent Technology Products

DEFF Research Database (Denmark)

Restrepo-Giraldo, John Dairo; McAloone, Timothy Charles; Schlegel, Tanja

2008-01-01

be used too early in the design process, given that users respond best to issues they know or can relate to. This paper presents a case study where a user-centred approach was used to determine when and how to involve users in the design of a TV-enabled mobile telephone. The aim of the study......Current participatory design methods do not allow designers to gain the insight required to develop products with emerging technologies, that is, products that do not have any precedents in the users’ knowledge base and experience. This poses challenges to the designers, as input from users cannot...... methodological issues related to user involvement in the implementation of emerging technologies in the consumer electronics industry....

Hybrid breeding in wheat: technologies to improve hybrid wheat seed production.

Science.gov (United States)

Whitford, Ryan; Fleury, Delphine; Reif, Jochen C; Garcia, Melissa; Okada, Takashi; Korzun, Viktor; Langridge, Peter

2013-12-01

Global food security demands the development and delivery of new technologies to increase and secure cereal production on finite arable land without increasing water and fertilizer use. There are several options for boosting wheat yields, but most offer only small yield increases. Wheat is an inbred plant, and hybrids hold the potential to deliver a major lift in yield and will open a wide range of new breeding opportunities. A series of technological advances are needed as a base for hybrid wheat programmes. These start with major changes in floral development and architecture to separate the sexes and force outcrossing. Male sterility provides the best method to block self-fertilization, and modifying the flower structure will enhance pollen access. The recent explosion in genomic resources and technologies provides new opportunities to overcome these limitations. This review outlines the problems with existing hybrid wheat breeding systems and explores molecular-based technologies that could improve the hybrid production system to reduce hybrid seed production costs, a prerequisite for a commercial hybrid wheat system.

Oxidative damage to DNA by diesel exhaust particle exposure in co-cultures of human lung epithelial cells and macrophages

DEFF Research Database (Denmark)

Jantzen, Kim; Roursgaard, Martin; Madsen, Claus Desler

2012-01-01

Studies in mono-culture of cells have shown that diesel exhaust particles (DEPs) increase the production of reactive oxygen species (ROS) and oxidative stress-related damage to DNA. However, the level of particle-generated genotoxicity may depend on interplay between different cell types, e.g. lung...... treatment with standard reference DEPs, SRM2975 and SRM1650b. The exposure to DEPs did not affect the colony-forming ability of A549 cells in co-culture with THP-1a cells. The DEPs generated DNA strand breaks and oxidatively damaged DNA, measured using the alkaline comet assay as formamidopyrimidine...... relationship between levels of respiration and ROS production. In conclusion, exposure of mono-cultured cells to DEPs generated oxidative stress to DNA, whereas co-cultures with macrophages had lower levels of oxidatively damaged DNA than A549 epithelial cells....

The provision of assistive technology products and services for people with dementia in the United Kingdom.

Science.gov (United States)

Gibson, Grant; Newton, Lisa; Pritchard, Gary; Finch, Tracy; Brittain, Katie; Robinson, Louise

2016-07-01

In this review we explore the provision of assistive technology products and services currently available for people with dementia within the United Kingdom. A scoping review of assistive technology products and services currently available highlighted 171 products or product types and 331 services. In addition, we assimilated data on the amount and quality of information provided by assistive technology services alongside assistive technology costs. We identify a range of products available across three areas: assistive technology used 'by', 'with' and 'on' people with dementia. Assistive technology provision is dominated by 'telecare' provided by local authorities, with services being subject to major variations in pricing and information provision; few currently used available resources for assistive technology in dementia. We argue that greater attention should be paid to information provision about assistive technology services across an increasingly mixed economy of dementia care providers, including primary care, local authorities, private companies and local/national assistive technology resources. © The Author(s) 2014.

A review on the current status and production technology of 32,33P-orthophosphoric acid

International Nuclear Information System (INIS)

Park, Ul Jae; Han, Hyun Soo; Cho, Woon Kap; Kuznetsov, Rostislav A.

2000-10-01

The current status of 32 , 33 P-Orthophosphoric acid production technology is reviewed. The following aspects of the technology are covered: - production of phosphorus-32 and phosphorus-33 using various nuclear reactions; - chemical properties of sulfur and phosphorus effecting the technology of radioactive phosphorus production; - chemical state of 32 , 33 P in neutron irradiated sulfur; - the technology of radioactive phosphorus isolation from neutron irradiated target and orthophosphoric acid production; - purification of 32 , 33 P-orthophosphoric acid from impurities and some related problems, like the nature of impurities, the storage of the final product, etc. - the quality control procedures of carrier-free ( 32 , 33 P)-orthophosphoric acid preparations

Microbial electrolysis cells as innovative technology for hydrogen production

International Nuclear Information System (INIS)

Chorbadzhiyska, Elitsa; Hristov, Georgi; Mitov, Mario; Hubenova, Yolina

2011-01-01

Hydrogen production is becoming increasingly important in view of using hydrogen in fuel cells. However, most of the production of hydrogen so far comes from the combustion of fossil fuels and water electrolysis. Microbial Electrolysis Cell (MEC), also known as Bioelectrochemically Assisted Microbial Reactor, is an ecologically clean, renewable and innovative technology for hydrogen production. Microbial electrolysis cells produce hydrogen mainly from waste biomass assisted by various bacteria strains. The principle of MECs and their constructional elements are reviewed and discussed. Keywords: microbial Electrolysis Cells, hydrogen production, waste biomass purification

Italy au CERN

CERN Multimedia

FI Department

2008-01-01

4 – 6 March 2008 Main Building Bldg 60 - ground and 1st floor 09.00 hrs - 17.30 hrs Nineteen companies will present their latest technology at the "Italy at CERN" exhibition. Italian industry will exhibit products and technologies related to the field of particle physics. The main subjects are civil engineering and buildings, data processing, electrical engineering, electronics, industrial support, mechanical engineering, particle detectors and vacuum and low-temperature technology. The exhibition is being organised by the INFN of Padova. The exhibitors are listed below. More details on the firms can be found at the following link: http://fi-dep.web.cern.ch/fi-dep/structure/memberstates/exhibitions_visits.htm LIST OF EXHIBITORS Boffetti Impianti S.r.l. Bozzi & Figli S.r.l. C.A.E.N. S.p.A. Cavicel S.p.A. Comecer S.p.A. E.E.I. Elettronica Conduttori S.r.l. Euromec S.r.l. Eurotech S.p.A. IRST Fondazione Bruno Kessler IVG Colbacchini S.p.A. Krohne Italia S.r.l. Luvata For...

ITALY AT CERN

CERN Multimedia

FI Department

2008-01-01

4 – 6 March 2008 Main Building Bldg 60 - ground and 1st floor 09.00 hrs - 17.30 hrs Nineteen companies will present their latest technology at the "Italy at CERN" exhibition. Italian industry will exhibit products and technologies related to the field of particle physics. The main subjects are civil engineering and buildings, data processing, electrical engineering, electronics, industrial support, mechanical engineering, particle detectors and vacuum and low-temperature technology. The exhibition is being organised by the INFN of Padova. The exhibitors are listed below. More details on the firms can be found at the following link: http://fi-dep.web.cern.ch/fi-dep/structure/memberstates/exhibitions_visits.htm LIST OF EXHIBITORS Boffetti Impianti S.r.l. Bozzi & Figli S.r.l. C.A.E.N. S.p.A. Cavicel S.p.A. Comecer S.p.A. E.E.I. Elettronica Conduttori S.r.l. Euromec S.r.l. Eurotech S.p.A. IRST Fondazione Bruno Kessler IVG Colbacchini S.p.A. Krohne Italia S.r.l. Luvata For...

Artificial intelligence in a technological production system of the set quality

Directory of Open Access Journals (Sweden)

V. I. Karpov

2017-01-01

Full Text Available This  article considers the expert system (ES as a subsystem of management information system technology of sausage products of a given quality. Given the typical structure of an automated expert system, upgraded under a set of interrelated operations of the technological process of production of cooked sausages. Describes the development of two main blocks of this expert system – a database and knowledge base, creating an information space. The work of ES is a sequence of steps, each of which is selected from the database for a rule that applies to the current contents of the working set. The cycle ends when withdrawn or denied the target claim. In our case, the system is designed as a system with direct output, in which the known facts is found the conclusion which from these facts follows. If such a conclusion is found, it is entered into working memory. The knowledge base of an expert system is created as a set of separate entities. The set of these entities allows you to generate objects of study, rules that they can conform, and recommendations for meeting these rules. A set of such entities with their attributes and relationships can be represented as a set of tuples. For the implementation of this approach developed an automated expert system of control of technological process of production of meat and sausage products – the program complex (PC “MulTimit Expert”. The effectiveness of using the developed expert system to control the technology of sausage products of a given quality are considered in one of the examples of the identification of technology defects in the formulation of cooked sausages "Capital", containing large amounts of fatty raw materials. The results of the research as a whole showed that the recommendations of the developed expert system make it possible to improve the quality of the ready-to-eat meat product, increase the water retention coefficient characterizing the moisture retention capacity of the

Technology of new generation of manufacture of liquid products from coal

Directory of Open Access Journals (Sweden)

Zhaksyntay Kairbekov

2012-04-01

Full Text Available In the given work the review about a condition of research and trial works on technology perfection hydrogenation coals is made. Done design work on processing 65 thousand tons / year Karazhyra coal to liquid fuels and other products of combustion purposes. The basic advantage of the Kazakhstan technology for producing motor fuels coal hydrogenation at low pressure hydrogen (up to 5 MPa compared to the processes developed in the USA, Germany, Japan, Great Britain, and Russia. An integrated low-waste technology and coal processing, which allows the production of industrially important: liquid and patent fuel, binders for briquetting, and allocate bitumen due to the utilization of sludge.

Analysis the Impact of Technology Spillovers on Total Factor Productivity of Agricultural Sector in Iran

Directory of Open Access Journals (Sweden)

Mostafa Baniasadi

2016-09-01

Full Text Available Introduction: The growth of agricultural production and natural resources are from primary objectives of any political system, because this section has a vital role in providing food security. According to the production theories, production growth will come from two sources; more use of production factors within the framework of existing technologies and second, with using more advanced and more efficient production methods and effective use of production factors. In fact, the second one is tied to the concept of productivity. New and efficient technologies are the most important factor for productivity growth. Technology was enhanced through internal and external sources. External sources include spillover technology from developed countries into another country. Empirical evidence on the impact of spillover technology on productivity growth of indigenous producer is vague. One perspective proposes that FDI, technology transferred from developed countries has positive effects on developing countries and another perspective is against it. This paper explores the role of technological spillover on total factor productivity (TFP growth in agricultural sectors of Iran uses time series data during 1971-2011. Materials and Methods: In this study, Kendrick model was used to calculate total factor productivity. After calculating productivity, affective factors on it, were examined through ARDL model. The aim of this study is examination of technology spillover on the productivity of agricultural sectors. The degree of technology diffusion grows with increase in technology distance between the hosts and the foreign countries. The greater the technology distance, the more difficult it becomes for developing countries to boost independent innovation. To calculate the index of technology spillover, commercial partners should be considered that are more advanced in science and technology than Iran. For this purpose, commercial partners in this study are

High Temperature Electrolysis for Hydrogen Production from Nuclear Energy - Technology Summary

International Nuclear Information System (INIS)

O'Brien, J.E.; Stoots, C.M.; Herring, J.S.; McKellar, M.G.; Harvego, E.A.; Sohal, M.S.; Condie, K.G.

2010-01-01

The Department of Energy, Office of Nuclear Energy, has requested that a Hydrogen Technology Down-Selection be performed to identify the hydrogen production technology that has the best potential for timely commercial demonstration and for ultimate deployment with the Next Generation Nuclear Plant (NGNP). An Independent Review Team has been assembled to execute the down-selection. This report has been prepared to provide the members of the Independent Review Team with detailed background information on the High Temperature Electrolysis (HTE) process, hardware, and state of the art. The Idaho National Laboratory has been serving as the lead lab for HTE research and development under the Nuclear Hydrogen Initiative. The INL HTE program has included small-scale experiments, detailed computational modeling, system modeling, and technology demonstration. Aspects of all of these activities are included in this report. In terms of technology demonstration, the INL successfully completed a 1000-hour test of the HTE Integrated Laboratory Scale (ILS) technology demonstration experiment during the fall of 2008. The HTE ILS achieved a hydrogen production rate in excess of 5.7 Nm3/hr, with a power consumption of 18 kW. This hydrogen production rate is far larger than has been demonstrated by any of the thermochemical or hybrid processes to date.

Sustainable thermal technologies and care homes: Productive alignment or risky investment?

International Nuclear Information System (INIS)

Neven, Louis; Walker, Gordon; Brown, Sam

2015-01-01

The use of more sustainable thermal technologies is a policy imperative across the UK building stock. However, not all building uses provide the same opportunities for technology uptake as others. Care homes for older people have characteristics which in technical and economic terms suggest that they might be particularly appropriate for the implementation of more sustainable thermal technologies. They have comparatively high demands for space heating and hot water often sustained on a 24/7 basis. However there are many considerations, both generic and contextual, that will typically play into processes of technology uptake. Through qualitative research in six case study homes, focused on management and staff perspectives and experiences, we explore the degree to which there might be a productive alignment between care home operation and the use of sustainable thermal technologies. Two key themes emerge focused on business considerations and the importance of avoiding risk and damage to reputation; and the ways in which different thermal technologies are relevant to and can potentially impact on care practices. We conclude that despite potential benefits the sector could remain rather resistant to sustainability innovations. We suggest therefore areas in which productive action and further research could be undertaken. -- Highlights: •Care homes for older people might be particularly appropriate for the use of sustainable thermal technologies. •We examine if a productive alignment between care homes and the use of sustainable thermal technologies does exist in practice. •Two key themes are risks to business reputation; and relevance and potential benefits to care practices. •We conclude that the sector could remain rather reluctant to embrace sustainability innovation

Germany at CERN

CERN Multimedia

C. Laignel / FI-DI

2005-01-01

From 1 to 3 march 2005 Administration Building Bldg 60/61 - ground and 1st floor 09:30 - 17:30 Twenty eight companies will present their latest technology at the "Germany at CERN" exhibition. German industry will exhibit products and technologies which are related to the field of particle physics. The main subjects are: mechanical engineering, particle detectors, electrical engineering, electronics, data processing, radiation protection and vacuum and low temperature techonology. The exhibition is organised by the Federal Minister of Education and Research (BMBF), Bonn. There follows: the list of exhibitors A detailed programme will be available in due course at : your Departemental secretariat, the reception information desk, Building 33, the exhibition. A detailed list of firms is available under the following FI link: http://fi-dep.web.cern.ch/fi-dep/structure/memberstates/exhibitions_visits.htm LIST OF EXHIBITORS ACCEL Instruments GmbH APRA-NORM Elektromechanik GmbH BABCOCK NOELL Nucle...

Germany AT CERN

CERN Multimedia

C. Laignel / FI-DI

2005-01-01

From 1 to 3 march 2005 Administration Building Bldg 60/61 - ground and 1st floor 09:30 - 17:30 Twenty nine companies will present their latest technology at the "Germany at CERN" exhibition. German industry will exhibit products and technologies related to the field of particle physics. The main sectors represented will be: mechanical engineering, particle detectors, electrical engineering, electronics, data processing, radiation protection and vacuum and low temperature techonology. The exhibition is organised by the Federal Minister of Education and Research (BMBF), Bonn. The exhibitors are listed below. A detailed programme will be available in due course: from your Departemental secretariat, from the reception information desk, Building 33, at the exhibition itself. A detailed list of the participating firms is already available at the following FI link: http://fi-dep.web.cern.ch/fi-dep/structure/memberstates/exhibitions_visits.htm LIST OF EXHIBITORS ACCEL Instruments GmbH APRA-NORM Elekt...

Germany AT CERN

CERN Multimedia

2005-01-01

From 1 to 2 March 2005 Administration Building Bldg 60/61 - ground and 1st floor 09:30 - 17:30 Twenty nine companies will present their latest technology at the "Germany at CERN" exhibition. German industry will exhibit products and technologies related to the field of particle physics. The main sectors represented will be: mechanical engineering, particle detectors, electrical engineering, electronics, data processing, radiation protection and vacuum and low temperature techonology. The exhibition is organised by the Federal Ministry of Education and Research (BMBF), Bonn. The exhibitors are listed below. A detailed programme will be available in due course: from your Departemental secretariat, from the reception information desk, Building 33, at the exhibition itself. A detailed list of the participating firms is already available at the following FI link: http://fi-dep.web.cern.ch/fi-dep/structure/memberstates/exhibitions_visits.htm LIST OF EXHIBITORS ACCEL Instruments GmbH APRA-NORM Elekt...

FRANCE at CERN - Visit of Firms

CERN Multimedia

C. Laignel

2007-01-01

From 4 to 5 June 2007 Administration Building Bldg 61 - 1st floor - Room B 09.00 - 17.30 Eighteen companies will present their latest technology at the 'France at CERN' exhibition. French industry will exhibit products and technologies which are related to the field of particle physics. Individual interviews will take place in technicians' offices. The firms will contact relevant users/technicians but any user wishing to make contact with a particular firm is welcome to use the contact details which are available from each department secretariat or from the Purchasing web pages at the following URL http://fi-dep.web.cern.ch/fi-dep/structure/memberstates/exhibitions_visits.htm The main subjects are: mechanical engineering, electrical engineering, electronics, data processing, various supplies and civil engineering and buildings. The exhibition is organised by UBIFRANCE, the French Committee for Trade Events Abroad. The list of exhibitors is given below. LIST OF EXHIBITORS: 40-30 ACC LA JONCHERE ...

FRANCE AT CERN - VISIT OF FIRMS

CERN Multimedia

C. Laignel / FI-DI

2007-01-01

From 4 to 5 June 2007 Administration Building Bldg 61 - 1st floor - Room B 09.00 - 17.30 Seventeen companies will present their latest technology at the 'France at CERN' exhibition. French industry will exhibit products and technologies which are related to the field of particle physics. Individual interviews will take place in technicians' offices. The firms will contact relevant users/technicians but any user wishing to make contact with a particular firm is welcome to use the contact details which are available from each departmental secretariat or from the Purchasing web pages at the following URL http://fi-dep.web.cern.ch/fi-dep/structure/memberstates/exhibitions_visits.htm The main subjects are: mechanical engineering, electrical engineering, electronics, data processing, various supplies and civil engineering and buildings. The exhibition is organised by UBIFRANCE, the French Committee for Trade Events Abroad. You will find below the list of exhibitors. LIST OF EXHIBITORS: 40-30 ACC LA JONCHE...

Holland at CERN – Industrial exhibition

CERN Multimedia

GS Department

2010-01-01

Sponsored by EVD, an agency of the Dutch Ministry of the Economy From 8 to 11 November 2010 Industrial Exhibition Administration Building Bldg. 61 9-00 - 17-30 Twenty seven companies will present their latest technology at the industrial exhibition "Holland at CERN". Dutch industry will exhibit products and technologies which are related to the field of particle physics. Individual interviews will take place directly at the stands in the Main Building. The firms will contact relevant users/technicians but any user wishing to make contact with a particular firm is welcome to use the contact details which are available from each departmental secretariat or at the following URL: http://gs-dep.web.cern.ch/gs-dep/groups/sem/ls/Industrial_Exhibitions.htm#Industrial_exhibitions You will find the list of exhibitors below. LIST OF EXHIBITORS: Schelde Exotech Vernooy BV Triumph Group INCAA Computers DeMaCo Holland bv TNO Science & Industry Janssen Precision Engi...

Trapping technology for gaseous fission products from voloxidation process

International Nuclear Information System (INIS)

Shin, Jin Myeong; Park, J. J.; Park, G. I.; Jung, I. H.; Lee, H. H.; Kim, G. H.; Yang, M. S.

2005-05-01

The objective of this report is to review the different technologies for trapping the gaseous wastes containing Cs, Ru, Tc, 14 C, Kr, Xe, I and 3 H from a voloxidation process. Based on literature reviews and KAERI's experimental results on the gaseous fission products trapping, appropriate trapping method for each fission product has been selected considering process reliability, simplicity, decontamination factor, availability, and disposal. Specifically, the most promising trapping method for each fission product has been proposed for the development of the INL off-gas trapping system. A fly ash filter is proposed as a trapping media for a cesium trapping unit. In addition, a calcium filter is proposed as a trapping media for ruthenium, technetium, and 14 C trapping unit. In case of I trapping unit, AgX is proposed. For Kr and Xe, adsorption on solid is proposed. SDBC (Styrene Divinyl Benzene Copolymer) is also proposed as a conversion media to HTO for 3 H. This report will be used as a useful means for analyzing the known trapping technologies and help selecting the appropriate trapping methods for trapping volatile and semi-volatile fission products, long-lived fission products, and major heat sources generated from a voloxidation process. It can also be used to design an off-gas treatment system

Herbal complex of green buckwheat in the production technology of cakes

Directory of Open Access Journals (Sweden)

L. E. Glagoleva

2016-01-01

Full Text Available The possibility of using vegetable complex of green buckwheat in production technology cheesecakes. The unique chemical, rich mineral and vitamin composition buckwheat green indicates desirability of not only its use, but also th e possibility of using for cooking preventive and functional orientation. Using green buckwheat plant complex due to the hi gh water-holding ability to reduce the time of the process, eliminate some technological preparatory operations, such as pressing off. It is found that the maximum degree of swelling (2.5 g/g was observed at 40 oC and pH 4, 2. The time to reach an equilibrium state is reached after 30 minutes. On the basis of the research has been defined in a way to make plant complex curd basis, in an amount of from 10 to 70 % based on standardized physical-chemical and organoleptic characteristics of harmonious order to minimize-if-operation of flour to make the product functional and preventive properties. Technology of production of a pre -from adequate use of shock freezing, thus preserving the shape, color and flavor of the product. Microbiologists -cal studies analyzed frozen semi-finished products indicates that the microbiological-cal indicators remain stable throughout the shelf life. The use of herbal ingredients in the development of technology and the adjustment of the nutritional value of cheese bioproducts will solve the issue of their care-enrichment in essential micronutrients and natural way to improve the taste and increase the life -sti Useful developed products that currently is a modern and topical focus of research.

Diseño piloto del sistema de tratamiento pasivo de infiltraciones provenientes del depósito de material inadecuado de Minera La Zanja, Perú

OpenAIRE

Jurado Garayar, Dante Danilo

2016-01-01

El presente estudio denominado “Diseño piloto del sistema de tratamiento pasivo de infiltraciones provenientes del depósito de material inadecuado de Minera La Zanja, Perú” tiene como objetivo evaluar y seleccionar un piloto de sistema de tratamiento pasivo, para ello se identificará la zona de estudio, los materiales y especies vegetales con potencial para la implementación de este sistema de tratamiento. El método de investigación utilizado es el cualitativo y descriptivo (He...

Evaluation of the U.S. Geological Survey standard elevation products in a two-dimensional hydraulic modeling application for a low relief coastal floodplain

Science.gov (United States)

Witt, Emitt C.

2015-01-01

Growing use of two-dimensional (2-D) hydraulic models has created a need for high resolution data to support flood volume estimates, floodplain specific engineering data, and accurate flood inundation scenarios. Elevation data are a critical input to these models that guide the flood-wave across the landscape allowing the computation of valuable engineering specific data that provides a better understanding of flooding impacts on structures, debris movement, bed scour, and direction. High resolution elevation data are becoming publicly available that can benefit the 2-D flood modeling community. Comparison of these newly available data with legacy data suggests that better modeling outcomes are achieved by using 3D Elevation Program (3DEP) lidar point data and the derived 1 m Digital Elevation Model (DEM) product relative to the legacy 3 m, 10 m, or 30 m products currently available in the U.S. Geological Survey (USGS) National Elevation Dataset. Within the low topographic relief of a coastal floodplain, the newer 3DEP data better resolved elevations within the forested and swampy areas achieving simulations that compared well with a historic flooding event. Results show that the 1 m DEM derived from 3DEP lidar source provides a more conservative estimate of specific energy, static pressure, and impact pressure for grid elements at maximum flow relative to the legacy DEM data. Better flood simulations are critically important in coastal floodplains where climate change driven storm frequency and sea level rise will contribute to more frequent flooding events.

Technology Epiphany and an Integrated Product and Service

Directory of Open Access Journals (Sweden)

Satoru Goto

2017-07-01

Full Text Available This study aims at exploring how an integrated product and service contributes to achieving Innovation of Meaning (IoM or technology epiphany. Existing IoM studies have focused on intended meaning (as defined in new product development and ignored the received meaning that users reconstruct. The process by which a user assigns meaning to things can not only be static but also dynamic. This study focuses on integrated products and contexts offered by services and analyses the case of Japan’s largest manufacturer of ankle-foot orthoses. The results show that the service guides the users to reconstruct the meaning in dynamic cognitive processes and use the metaphors that contribute to the consistency between products and services.

Green technological change. Renewable energies, policy mix and innovation. Results of the GRETCHEN project on the impact of policy mixes on the technological and structural change in renewable energy electricity production technologies in Germany

International Nuclear Information System (INIS)

Rogge, Karoline S.; Breitschopf, Barbara; Mattes, Katharina; Cantner, Uwe; Graf, Holger; Herrmann, Johannes; Kalthaus, Martin; Lutz, Christian; Wiebe, Kirsten

2015-09-01

The report on the GRETCHEN project that was concerned with the impact of policy mixes on the technological and structural change in renewable energy electricity production technologies in Germany covers the following issues: market and technology development of renewable energy electricity production technologies; the policy mix for renewable electricity production technologies, innovative impact of the policy mix; subordinate conclusions for politics and research.

Development of semiindustrial technology for electrolytic powder production

International Nuclear Information System (INIS)

Suchkov, A.B.; Kovalev, B.F.; Zhbanov, A.M.; Rabinovich, E.M.; Sozina, A.L.

1978-01-01

The technology of the production of Fe, Mn, Cr, W pure metal powders by electrolysis of industrial waste in molten chloride-fluoride media with the addition of lower chlorides of refining metal was tested in laboratory and then in industrial electrolysers (2kA). The cathode deposit was subjected to hydrometallurgical treatment. Approximate technological parameters of electrorefining are presented. A high-temperature (700-1000 deg C) hydrogen annealing was applied to increase the quality and to change physicochemical and technological characteristics of electrolytic powders. The data on the chemical composition of Mowders are presented, testifying to their high purity. It is shown that electrolytic powders are not uniform in granulometric composition (from 1 to 100 μm), their particles being characterized mainly by the dendrite structure

The Impact of Digital Video Technology on Production: The Case of "American Gothic."

Science.gov (United States)

Fink, Edward J.

1997-01-01

Opines that the study of video production is important in better understanding the aural/visual aspects of television, especially since television production is undergoing a digital revolution. Assesses the impact of new technologies by examining a "cutting-edge" program, "American Gothic." Finds that digital technology offers…

Production technology status and development trend of stable isotopes C, N and O

International Nuclear Information System (INIS)

Li Hulin

2011-01-01

It has been over half a century since the successful separation of table isotopes carbon, nitrogen and oxygen. The production capacity achieved three levels improvements from the laboratory-scale of one hundred grams, to the pilot production of several kilo- grams, and mass production of one hundred kilograms. The separation technologies also achieved three generation progress. The first generation of separation technology was represented by thermal diffusion method, chromatography, and ion exchange; the second generation of separation technology was represented by chemical exchange, distillation; the third generation of separation technology was characterized by the techniques innovation of material recycling, energy coupling, energy saving, and large-scale production capacity. At present, "1"3C is wholly produced by cryogenic distillation method, "1"5N is produced by NO/HNO_3 chemical exchange and NO cryogenic distillation method, and "1"80 is manufactured by distillation of water, and cryogenic distillation of NO and O_2. The same features of these separation methods are achieving energy coupling, materials recycling, large-scale producing, and energy conservation in the process. In the future, it will be the theme of stable isotope industry to develop environment-friendly, raw materials available, energy saving, low-cost, and large-scale manufacturing technology through continuous technological innovation. (authors)

Production technologies for molybdenum-99 and technetium-99m

International Nuclear Information System (INIS)

1999-02-01

Technetium-99m (6.02 h) is the most widely used radioisotope in nuclear medicine, accounting for more than 80% of all diagnostic nuclear medicine procedures. It is almost exclusively produced from the decay of its parent 99 Mo. The present sources of 99 Mo are research reactors by using the (n,γ) nuclear reaction with natural Mo ( 98 Mo, ∼24%), resulting in inexpensive but low-specific activity 99 Mo, or by neutron-induced fission of 235 U, which results in expensive but high specific activity 99 Mo. This publication covers several aspects related to the production of 99 Mo and 99m Tc. The contributed papers reflect the current status of the technology and discuss potential alternative methodologies for the production of 99 Mo and 99m Tc for medical use. The first four papers address the technologies using nuclear reactors, including the description of a new method using an aqueous homogenous reactor core for production of fission 99 Mo and the latest development efforts to fabricate 235 U low enriched targets (LEU, 235 U). The next five papers discuss the potential of utilizing particle accelerators and assess the current status of the available nuclear data for the production of both, 99 Mo and 99m Tc with proton and deuteron beams. The last paper discusses a new technology based on gel system for the preparation of 99 Mo/ 99m Tc generators using low specific activity 99 Mo produced in research reactors by the neutron activation of natural and inexpensive molybdenum oxide targets. Each individual paper was indexed and abstracted

Environmental technologies of woody crop production systems

Science.gov (United States)

Ronald S. Zalesny Jr.; John A. Stanturf; Emile S. Gardiner; Gary S. Ba??uelos; Richard A. Hallett; Amir Hass; Craig M. Stange; James H. Perdue; Timothy M. Young; David R. Coyle; William L. Headlee

2016-01-01

Soil erosion, loss of productivity potential, biodiversity loss, water shortage, and soil and water pollution are ongoing processes that decrease or degrade provisioning (e.g., biomass, freshwater) and regulating (e.g., carbon sequestration, soil quality) ecosystem services. Therefore, developing environmental technologies that maximize these services is essential for...

Technology Licensing Strategy for Network Product in a Service Industry

Directory of Open Access Journals (Sweden)

Xianpei Hong

2015-01-01

Full Text Available Technology licensing has gained significant attention in literature and practice as a rapid and effective way to improve firm’s capability of technology innovation. In this paper, we investigate a duopolistic service provider competition market, where service providers develop and sell a kind of network product. In this setting, we analyze the innovating service provider’s four licensing strategies: no licensing, fixed fee licensing, royalty licensing, and two-part tariff licensing. The literature suggests that when the network products can be completely substituted, two-part tariff licensing is the optimal strategy of the innovating service provider. We find that when the network products cannot be completely substituted, two-part tariff licensing is not always optimal. The degree of the product differentiation, the intensity of the network effects, and the R&D cost of the potential licensee play a key role in determining the innovating service provider’s optimal licensing strategies.

Technology supporting written productivity in children with learning disabilities: a critical review.

Science.gov (United States)

Batorowicz, Beata; Missiuna, Cheryl A; Pollock, Nancy A

2012-10-01

Occupational therapists working with school-aged children are often in the position of recommending technology to enhance written productivity. The outcome of using technology on the writing of children with learning disabilities has not been reviewed critically, and this knowledge is necessary for evidence-based practice. To review evidence regarding the use of technology to support written productivity in children with learning disabilities. A systematic search of seven databases, plus a manual search, retrieved 864 papers published between 1985 and March 2012. Twenty-seven papers (28 studies) met inclusion criteria. The evidence is of a moderately low level and results are inconclusive; however, trends suggest a positive influence of some technology on children's performance and behaviour. Methodological limitations exist in most studies and the description of specific technology intervention is often combined with teaching instructions. The available research is encouraging, but high-quality investigations with newer technologies are needed.

A Firm Level Study of Information Technology Productivity in Europe Using Financial and Market Based Measures

Directory of Open Access Journals (Sweden)

Alan Peslak

2004-05-01

Full Text Available For many years, business has invested significant resources in information technology, hardware, software, and manpower. The Productivity Paradox is the seeming lack of productivity gains despite the increased investment in IT. For many years the existence of a Productivity Paradox has been the subject of research interest. Conflicting results have been obtained from a variety of data sets. Until this time however there has been no study that has investigated European companies’ use of information technology and its impact on productivity. The objective of this study was to investigate information technology productivity with a new data set from a European published source, and measuring productivity using both market and financial based measures. Results of the study indicated that information technology did have a consistent positive impact on firm level productivity in Europe for the years 1996, 1997, and 1998. Both market and financial based productivity measures provided consistent positive significant returns with regard to IT productivity. The major contribution of the study is that it provides an analysis of the impact of European information technology on firm and economic productivity.

HEDONIC PREFERENCES AND UTILITARIAN JUSTIFICATIONS AT THE INTRODUCTION OF HIGH TECHNOLOGY PRODUCTS

Directory of Open Access Journals (Sweden)

Emilio Jose Montero Arruda Filho

2012-01-01

Full Text Available Fast technological upgrading attracts the development of new products in the market, converging into multiples uses and accesses, which has been presentedin the literature of new product development and systems integration. Due to their confront, this research places its study focus on the determinants of consumer preference for high technology product launch. The hedonic / social utility of the all-in-one products has a priority in utilitarian factors. The main objective of this work is to evaluate which factors influence the consumer preference of high technology users, using the Apple´s tablet (iPad as a research object to identify how its use decision is made. In this article, anetnographic study was carried out about the iPad consumer behavior, interpreting their needs through their experiences described in American websites for the discussion of the product. These sites present comments about the process of choice, preference and use of the iPad. The websites have also been used to collect the textual database which is coded, interpreted and presented through the description of how current and potential consumers use the analyzed product.

Technological capabilities, institutions and firm productivity: a multilevel study

Czech Academy of Sciences Publication Activity Database

Goedhuys, M.; Srholec, Martin

2015-01-01

Roč. 27, č. 1 (2015), s. 122-139 ISSN 0957-8811 Institutional support: PRVOUK-P23 Keywords : productivity * innovation * technological capability Subject RIV: AH - Economics Impact factor: 0.720, year: 2015

Energy Address Delivery Technologies and Thermal Transformations in Food Production

Directory of Open Access Journals (Sweden)

Burdo O.G.

2016-08-01

Full Text Available In this article, energetic and technical paradoxes in food nanotechnologies and traditional approaches to evaluation of energy recourses using are considered. Hypotheses of improvement of food production energy technologies are formulated. Classification of principles of address delivery of energy to food raw materials elements is given. We had substantiated the perspective objectives for heat-pumps installations and biphasic heat-transfer systems. The energy efficiency of new technolo-gies is compared on base of the number of energy impact. Principles of mass transfer modeling in ex-traction, dehydration and pasteurization combined processes are considered by food production exam-ple. The objectives of mathematical modeling of combined hydrodynamic and heat and mass transfer processes in modern energy technologies are set. The fuel energy conversion diagrams for drying, in-novative installations on the base of thermal siphons, heat pumps and electromagnetic energy genera-tors are represented. In this article, we illustrate how electromagnetic field, biphasic heat-transfer sys-tems and heat pumps can be effective tools for energy efficiency technologies.

MODERN TECHNOLOGICAL SOLUTIONS USED IN THE PRODUCTION OF BAKERY PRODUCTS WITH HIGH BIOLOGICAL VALUE

OpenAIRE

Marta Brodowska; Dominika Guzek; Agnieszka Wierzbicka

2014-01-01

Biological value of the food products is a result of the presence of bioactive substances and the proportions of the components. Technological development allows to optimize and accelerate the processes of bread production and increase value of food. Bakery industry used whole grains and pseudocereals as additional source of active compounds, biotechnological techniques as using appropriate yeast strain and encapsulation, which provide protection of substance and their controlled release in p...

Pathways to Commercial Success: Technologies and Products Supported by the Hydrogen, Fuel Cells and Infrastructure Technologies Program

Energy Technology Data Exchange (ETDEWEB)

none,

2009-08-01

This report documents the results of an effort to identify and characterize commercial and near-commercial (emerging) technologies and products that benefited from the support of the Hydrogen, Fuel Cells and Infrastructure Technologies Program and its predecessor programs within DOE's Office of Energy Efficiency and Renewable Energy.

Consumer concerns and expectations about novel food processing technologies: effects on product liking.

Science.gov (United States)

Cardello, Armand V

2003-06-01

Eighty-eight consumers participated in a blind pre-test in which they rated their baseline preference for chocolate pudding, their liking of three tasted brands of chocolate pudding, and their level of concern for 20 different food processing and preservation technologies. All returned one month later and tasted the same puddings, but this time they were informed that they had been processed by one of several different novel or traditional food processing techniques. Different sub-groups were informed of the name of the process, the name plus a factual description of the process, or the name, the factual description, plus a benefit statement. Ratings of expected liking were obtained before and after viewing the samples, but before tasting them. Finally, subjects tasted and rated the products for actual liking and a sub-group rated their concern levels for the same 20 technologies rated in the pre-test. Pre-test results showed females to have significantly higher concern levels for all technologies. Individuals who had demonstrated a willingness to consume foods processed by one novel technology (irradiation) had lower concern ratings for all technologies. Ratings of concern were negatively correlated with expected liking for products believed to be processed by the technologies. Expected liking ratings were positively influenced by visual exposure to the product and by a safety and benefit statement. Linear regression of the change in product liking as a function of whether products were better or worse than expected supported an assimilation model of the effect of disconfirmed expectations on liking/disliking. Lastly, post-test concern levels for many of the technologies were reduced by participation in the study.

Ethanol production by extractive fermentation - Process development and technology transfer

International Nuclear Information System (INIS)

Daugulis, A.J.; Axford, D.B.; Mau, T.K.

1991-01-01

Extractive Fermentation is an ethanol processing strategy in which the operations of fermentation and product recovery are integrated and undertaken simultaneously in a single step. In this process an inert and biocompatible organic solvent is introduced directly into the fermentation vessel to selectively extract the ethanol product. The ethanol is readily recovered from the solvent at high concentration by means of flash vaporization, and the solvent is recycled in a closed loop back to the fermentor. This process is characterized by a high productivity (since ethanol does not build up to inhibitory levels), continuous operation, significantly reduced water consumption, and lower product recovery costs. The technical advantages of this processing strategy have been extensively demonstrated by means of a continuous, fully integrated and computer-controlled Process Demonstration Unit in the authors' laboratory. Numerous features of this technology have been protected by US patent. A thorough economic comparison of Extractive Fermentation relative to modern ethanol technology (continuous with cell recycle) has been completed for both new plants and retrofitting of existing facilities for a capacity of 100 million liters of ethanol per year. Substantial cost savings are possible with Extractive Fermentation ranging, depending on the process configuration, from 5 cents to 16 cents per liter. Activities are under way to transfer this proprietary technology to the private sector

Application of Modern Technologies for Nuclear Power Plant Productivity Improvements

International Nuclear Information System (INIS)

Joseph, A. Naser

2011-01-01

The nuclear power industry in several countries is concerned about the ability to maintain current high plant performance levels due to aging and obsolescence, knowledge drain, fewer plant staff, new requirements and commitments, unnecessary workloads and stress levels, and human errors. Current plant operations are labor-intensive due to the vast number of operational and support activities required by the commonly used technology in most plants. These concerns increase as plants extend their operating life. In addition, there is the desire by many plants to further improve performance while reducing human errors and increasingly focus on reducing operations and maintenance costs. New productivity improvement capabilities with measurable economic benefits are needed so that a successful business case can be made for their use. Improved and new instrumentation and control, human-system interface, information and communications technologies used properly can address concerns about cost-effectively maintaining current performance levels and enable shifts to even higher performance levels. This can be accomplished through the use of new technology implementations to improve productivity, reduce costs of systemic inefficiencies and avoid unexpected costs. Many of the same type of productivity improvements for operating plants will be applicable for new plants. As new plants are being built, it is important to include these productivity improvements or at least provide the ability to implement them easily later

Levantamento das espécies exóticas arbóreas e seu impacto nas espécies nativas em áreas adjacentes a depósitos de resíduos domiciliares

Directory of Open Access Journals (Sweden)

Otacílio Antunes Santana

2011-09-01

Full Text Available http://dx.doi.org/10.5007/2175-7925.2008v21n4p29 Os objetivos deste trabalho, em áreas adjacentes à deposição de resíduos domiciliares, foram: i realizar o levantamento das espécies exóticas, ii verificar o seu impacto nas espécies nativas arbóreas de Cerrado, e iii comparar os resultados com áreas controles. Vinte e duas espécies exóticas foram encontradas nas parcelas estudadas próximos aos depósitos de resíduos domiciliares, distribuídas entre treze famílias. Apenas duas espécies foram encontradas nas áreas controle. A presença de depósitos de resíduos domiciliares aumenta a incidência de espécies exóticas arbóreas, causando um gradiente na distribuição de seus indivíduos, padrão não observado nas áreas controles.

MODERN TRENDS IN THE DEVELOPMENT OF THE TECHNOLOGIES FOR PRODUCTION OF DENTAL CONSTRUCTIONS.

Directory of Open Access Journals (Sweden)

Tsanka Dikova

2015-12-01

Full Text Available The aim of the present paper is to make a review of the modern trends in the development of the technologies for production of dental constructions. Three are the main trends in production technologies in dentistry last 30 years: digitalization, simulation and implementation of additive technologies. The simulation occurred first and due to the computers development it underwent fast progress from the mathematical calculations and analytical analysis to the 3D modeling and visualization. Thus Computer Aided Engineering (CAE was developed, allowing dental constructions with optimal design to be produced by optimal technological regimes. The first Computer Aided Design (CAD – Computer Aided Manufacturing (CAM systems were created in 1970s as a result of the digitalization. In this mode of operation at first virtual 3D model is generated by CAD, which then is used for production of the real construction by CAM. The CAD-CAM systems allow fabrication of dental restorations which is difficult or impossible to be manufactured by conventional technologies. The development of CAD unit runs from indirect scanning of the plaster model for obtaining data for the 3D model to direct scanning of the prosthesis area. While the development of CAM unit leads to direct manufacturing of the real dental construction using subtractive or additive technologies. The future development of the CAD-CAM systems as a whole characterizes with transition from closed to open access systems, which make them more flexible. In the late 1980sthe new approach to the production of constructions appeared – by addition of material layer by layer. The additive technologies were developed. They characterize with building of one layer at a time from a powder or liquid that is bonded by means of melting, fusing or polymerization. Stereo lithography, fused deposition modeling, selective electron beam melting, laser powder forming and inkjet printing are the methods, mostly used in

Environmental life cycle assessment of methanol and electricity co-production system based on coal gasification technology.

Science.gov (United States)

Śliwińska, Anna; Burchart-Korol, Dorota; Smoliński, Adam

2017-01-01

This paper presents a life cycle assessment (LCA) of greenhouse gas emissions generated through methanol and electricity co-production system based on coal gasification technology. The analysis focuses on polygeneration technologies from which two products are produced, and thus, issues related to an allocation procedure for LCA are addressed in this paper. In the LCA, two methods were used: a 'system expansion' method based on two approaches, the 'avoided burdens approach' and 'direct system enlargement' methods and an 'allocation' method involving proportional partitioning based on physical relationships in a technological process. Cause-effect relationships in the analysed production process were identified, allowing for the identification of allocation factors. The 'system expansion' method involved expanding the analysis to include five additional variants of electricity production technologies in Poland (alternative technologies). This method revealed environmental consequences of implementation for the analysed technologies. It was found that the LCA of polygeneration technologies based on the 'system expansion' method generated a more complete source of information on environmental consequences than the 'allocation' method. The analysis shows that alternative technologies chosen for generating LCA results are crucial. Life cycle assessment was performed for the analysed, reference and variant alternative technologies. Comparative analysis was performed between the analysed technologies of methanol and electricity co-production from coal gasification as well as a reference technology of methanol production from the natural gas reforming process. Copyright © 2016 Elsevier B.V. All rights reserved.

Environmental benefits of advanced oil and gas exploration and production technology

Energy Technology Data Exchange (ETDEWEB)

None

1999-10-01

THROUGHOUT THE OIL AND GAS LIFE CYCLE, THE INDUSTRY HAS APPLIED AN ARRAY OF ADVANCED TECHNOLOGIES TO IMPROVE EFFICIENCY, PRODUCTIVITY, AND ENVIRONMENTAL PERFORMANCE. THIS REPORT FOCUSES SPECIFICALLY ON ADVANCES IN EXPLORATION AND PRODUCTION (E&P) OPERATIONS.

Cuaternario y geomorfología de Argentina : Distribución y características de los principales depósitos y rasgos geomorfológicos

OpenAIRE

Fuks, Enrique Eduardo; Pisano, María Florencia

2017-01-01

La necesidad de contar con información sobre la distribución y características de los depósitos cuaternarios de Argentina, los rasgos geomorfológicos que ellos representan y los procesos que los originaron, nos ha llevado a tratar de reunir en un sólo volumen estos aspectos que, en general, se presentan dispersos en publicaciones individuales, haciéndose muy difícil para el estudiante poder abarcarlos. En este sentido, textos de Geomorfología hay muchos y buenos, con diferentes ópticas y acce...

Isotope production technologies from a regulatory perspective

Energy Technology Data Exchange (ETDEWEB)

Murthy, K. [Canadian Nuclear Safety Committee, Ottawa, Ontario (Canada)

2012-07-01

This paper discusses isotope production technologies from a regulatory perspective. The regulator is the CNSC which has the mandate to protect the health, safety and security of persons and the environment and to implement Canada's international commitments on the peaceful use of nuclear energy. Nuclear facilities regulated by CNSC include linear accelerator (medical), pool irradiator (industrial) and Pelletron (research) as well as cyclotrons.

PRODUCTIVITY AND LAND ENHANCING TECHNOLOGIES IN NORTHERN ETHIOPIA: HEALTH, PUBLIC INVESTMENTS, AND SEQUENTIAL ADOPTION

OpenAIRE

Ersado, Lire; Amacher, Gregory S.; Alwang, Jeffrey Roger

2003-01-01

The adoption of more efficient farming practices and technologies that enhance agricultural productivity and improve environmental sustainability is instrumental for achieving economic growth, food security and poverty alleviation in sub-Saharan Africa. Our research examines the interaction between public investments, community health, and adoption of productivity and land enhancing technologies by households in the northern Ethiopian state of Tigray. Agricultural technology adoption decision...

Biogas and BioFertilizer Production Using Green Technology

International Nuclear Information System (INIS)

Sirirote, Pramote

2010-01-01

Basically, it is technology which created and used in a way that conserves natural resources and the environment. This technology also can be environmental friendly because the use of this technology is supposed to reduce the amount of waste and pollution that is created during production and consumption. These food wastes will come from animal bone, crab skeleton, fish skeleton, rice, noodle, vegetable and others. We collect all of these wastes and then keep it in plants, and then we make sure that this waste will turn into biogas via anaerobic digestion. All of these involved hydrolysis, fermentation, aceto genesis and methano genesis process. Methane that produced will be used in biomass plant to generate electricity. Meanwhile bio fertilizer that produced will be applied on agriculture sectors as fertilizer for plants.

Trapping technology for gaseous fission products from voloxidation process

Energy Technology Data Exchange (ETDEWEB)

Shin, Jin Myeong; Park, J. J.; Park, G. I.; Jung, I. H.; Lee, H. H.; Kim, G. H.; Yang, M. S

2005-05-15

The objective of this report is to review the different technologies for trapping the gaseous wastes containing Cs, Ru, Tc, {sup 14}C, Kr, Xe, I and {sup 3}H from a voloxidation process. Based on literature reviews and KAERI's experimental results on the gaseous fission products trapping, appropriate trapping method for each fission product has been selected considering process reliability, simplicity, decontamination factor, availability, and disposal. Specifically, the most promising trapping method for each fission product has been proposed for the development of the INL off-gas trapping system. A fly ash filter is proposed as a trapping media for a cesium trapping unit. In addition, a calcium filter is proposed as a trapping media for ruthenium, technetium, and {sup 14}C trapping unit. In case of I trapping unit, AgX is proposed. For Kr and Xe, adsorption on solid is proposed. SDBC (Styrene Divinyl Benzene Copolymer) is also proposed as a conversion media to HTO for {sup 3}H. This report will be used as a useful means for analyzing the known trapping technologies and help selecting the appropriate trapping methods for trapping volatile and semi-volatile fission products, long-lived fission products, and major heat sources generated from a voloxidation process. It can also be used to design an off-gas treatment system.

An Overview of Natural Gas Conversion Technologies for Co-Production of Hydrogen and Value-Added Solid Carbon Products

Energy Technology Data Exchange (ETDEWEB)

Dagle, Robert A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Dagle, Vanessa [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Bearden, Mark D. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Holladay, Jamelyn D. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Krause, Theodore R. [Argonne National Lab. (ANL), Argonne, IL (United States); Ahmed, Shabbir [Argonne National Lab. (ANL), Argonne, IL (United States)

2017-11-16

This report was prepared in response to the U.S. Department of Energy Fuel Cell Technologies Office Congressional Appropriation language to support research on carbon-free production of hydrogen using new chemical processes that utilize natural gas to produce solid carbon and hydrogen. The U.S. produces 9-10 million tons of hydrogen annually with more than 95% of the hydrogen produced by steam-methane reforming (SMR) of natural gas. SMR is attractive because of its high hydrogen yield; but it also converts the carbon to carbon dioxide. Non-oxidative thermal decomposition of methane to carbon and hydrogen is an alternative to SMR and produces CO₂-free hydrogen. The produced carbon can be sold as a co-product, thus providing economic credit that reduces the delivered net cost of hydrogen. The combination of producing hydrogen with potentially valuable carbon byproducts has market value in that this allows greater flexibility to match the market prices of hydrogen and carbon. That is, the higher value product can subsidize the other in pricing decisions. In this report we highlight the relevant technologies reported in the literature—primarily thermochemical and plasma conversion processes—and recent research progress and commercial activities. Longstanding technical challenges include the high energetic requirements (e.g., high temperatures and/or electricity requirements) necessary for methane activation and, for some catalytic processes, the separation of solid carbon product from the spent catalyst. We assess current and new carbon product markets that could be served given technological advances, and we discuss technical barriers and potential areas of research to address these needs. We provide preliminary economic analysis for these processes and compare to other emerging (e.g., electrolysis) and conventional (e.g., SMR) processes for hydrogen production. The overarching conclusion of this study is that the cost of hydrogen can be potentially

IMPROVING THE EFFECTIVENESS AND EFFICIENCY OF EVIDENCE PRODUCTION FOR HEALTH TECHNOLOGY ASSESSMENT.

Science.gov (United States)

Facey, Karen; Henshall, Chris; Sampietro-Colom, Laura; Thomas, Sarah

2015-01-01

Health Technology Assessment (HTA) needs to address the challenges posed by high cost, effective technologies, expedited regulatory approaches, and the opportunities provided by collaborative real-world evaluation of technologies. The Health Technology Assessment International (HTAi) Policy Forum met to consider these issues and the implications for evidence production to inform HTA. This paper shares their discussion to stimulate further debate. A background paper, presentations, group discussions, and stakeholder role play at the 2015 HTAi Policy Forum meeting informed this paper. HTA has an important role to play in helping improve evidence production and ensuring that the health service is ready to adopt effective technologies. It needs to move from simply informing health system decisions to also working actively to align stakeholder expectations about realistic evidence requirements. Processes to support dialogue over the health technology life cycle need to be developed that are mindful of limited resources, operate across jurisdictions and learn from past processes. Collaborations between health technology developers and health systems in different countries should be encouraged to develop evidence that will inform decision making. New analytical techniques emerging for real-world data should be harnessed to support modeling for HTA. A paradigm shift (to "Health Innovation System 2.0") is suggested where HTA adopts a more central, proactive role to support alignment within and amongst stakeholders over the whole life cycle of the technology. This could help ensure that evidence production is better aligned with patient and health system needs and so is more effective and efficient.

Identifying and Researching Market Opportunities for New High Technology Products.

Science.gov (United States)

Dunstan, Peter

Using a product called the synchro-pulse welder as a case study example, this paper discusses the activities of CSIRO (Commonwealth Scientific and Industrial Research Organisation) in identifying and marketing new high-technology products. A general discussion of CSIRO's market research plans includes two goals to be attained within the next 5…

Technological aspects of horse meat products - A review.

Science.gov (United States)

Lorenzo, José M; Munekata, Paulo E S; Campagnol, Paulo Cezar Bastianello; Zhu, Zhenzhou; Alpas, Hami; Barba, Francisco J; Tomasevic, Igor

2017-12-01

Horse meat and its products can be considered as a food with a high nutritional value. However, due to cases of economically motivated food adulteration by the intentional addition of horse meat beef products in recent years, horse meat has become a controversial issue. Consumer confidence in meat products and the meat industry has diminished, although consumers consider the differences between the food content and the label as the major issue rather than the safety and nutritional characteristics of horse meat. The elaboration of meat products from horse meat (e.g. "cecina", dry-cured loin, salami, bressaola and pâté) is also an interesting alternative to other traditional meat products such as dry-cured pork hams, pork sausages and liver pâtés. In this review, the technological aspects, safety and storage stability of meat products elaborated from horse meat will be addressed by highlighting the nutritional and sensory aspects of these meat products. We aim to improve the existing knowledge about horse meat in the view of recent scandals. Copyright © 2017 Elsevier Ltd. All rights reserved.

Technology Adoption and Productivity Difference among Growers of New Rice for Africa in Savanna Zone of Nigeria

Directory of Open Access Journals (Sweden)

Rahji, MAY.

2009-01-01

Full Text Available The use of New Rice for Africa (NERICA and complementary rice production technology is being promoted by Nigeria government in order to increase productivity of upland rice farming. This study examines the levels, determinants and effects of complementary technology adoption on productivity of NERICA rice farming. Data for the study were obtained from sample survey of 227 NERICA rice farmers in the guinea savanna zone using multistage sampling technique. Data collected were analyzed using Tobit regression model and Cobb-Douglas production function. Results showed that the average technology score was 52.1 percent (+ 0.242. Fifty-five percent of the farmers who scored above the mean were categorized as low technology users. Tobit regression estimation shows that farmers' technology score was affected significantly (P< 0.05 by farmer's level of education (0.0127, extension visit (0.0145, farming experience (0.0085, land ownership status (0.0687, credit use (0.0698 and level of rice commercialization (0.3783. Cobb-Douglas production estimation shows a neutrally outward shift in production function as the level of complementary technology increases, indicating increasing productivity. Thus, promotion of complementary technology in NERICA rice production is a worthwhile effort and should continue to be funded. Improvement of those factors that significantly affect adoption of complementary technology is recommended.

Radionuclide technology applications in development and production in the automobile industry

International Nuclear Information System (INIS)

Sailer, S.

1982-01-01

Radionuclide technology (RNT) is utilized for air-engineering measurements. The spheres of interest here are the magnitude of the air flow and its spatial distribution in the interior of passenger cars, truck cabs and buses. For this purpose the air inside the vehicle is marked with 85 Kr, and the decrease in activity is measured at various driving speeds simulated in a wind tunnel. Oil consumption measurements with tritium-marked motor oil are used primarily to optimize new engines in terms of design (e.g. piston-ring components, type of lubrication), materials and lubricants. For this purpose the oil consumption is measured under various engine operating conditions (oil-consumption performance graph). The oil consumption of the individual cylinders can also be measured. The effect of production technologies (e.g. form and surface perfection) on oil consumption is important for improving production. The radionuclide technique most often used in the automobile industry is for the measurement of wear. The focal point here is the optimization of tribological systems in the development of engines, transmissions etc., studying the influence of design, materials and lubricants and determining the operating conditions which are critical for wear. Important information regarding the influence of production technologies on wear can be gained for production. In addition, considerable savings and higher quality can be realized in production by optimization of engine run-in programmes with RNT. The common factors for all RNT processes mentioned are that, compared with conventional measuring procedures, they are more precise, require shorter testing times, and can be performed under normal operating conditions. The prerequisites are careful selection of the applications and continual optimization of measurement technology. (author)

Algal wrack deposits and macroinfaunal arthropods on sandy beaches of the Chilean coast Depósitos de algas varadas y artrópodos macroinfaunales en playas de arena de la costa de Chile

Directory of Open Access Journals (Sweden)

EDUARDO JARAMILLO

2006-09-01

implications for sampling design of sandy beaches characterized by high inputs of algal wrack depositsSe muestrearon cuatro playas arenosas del litoral chileno durante el verano de 2000, para estudiar el rol de depósitos de algas varadas sobre las abundancias de las poblaciones de tres especies detritívoras de la macroinfauna que habita los niveles intermareales superiores de estas playas: el anfípodo talítrido Orchestoidea tuberculata Nicolet, el isópodo tílido Tylos spinulosus Dana y el insecto tenebriónido Phalerisidia maculata Kulzer. Las playas estudiadas fueron Apolillado (ca. 29º S, Quidico (ca. 38º S, Guabún y Mar Brava (ca. 42º S. Se recolectaron muestras replicadas con un cilindro plástico (25 cm de diámetro de los depósitos de algas, incluyendo el sedimento situado por debajo de los mismos y de zonas de la playa próximas a los acúmulos de algas pero carentes de las mismas. Las muestras se recolectaron en dos niveles de la playa, uno más próximo a la orilla con acúmulos de algas frescas y otro en la zona superior de la playa con algas secas. Los depósitos de algas varadas estuvieron compuestos principalmente por las algas pardas Macrocystis pyrifera (L., Durvillaea antarctica (Chamisso Hariot y Lessonia nigrescens Bory. O. tuberculata fue encontrada en los depósitos de algas y zonas de la playa cercanas a los mismos y estudiados en Apolillado, Quidico, Guabún y Mar Brava. Por otro lado, T. spinulosus fue recolectada solo en Apolillado, mientras que P. maculata ocurrió en los depósitos de algas y zonas de la playa cercanas a los mismos y analizados en Apolillado, Quidico y Guabún. En general, las abundancias medias de las tres especies fueron significativamente más altas en aquellas muestras recolectadas de los depósitos de algas y sedimentos subyacentes; i.e., 56, 61 y 14 veces más altas (promedios totales que en arenas sin restos de algas. Se concluye que las algas varadas sobre la superficie de la playa promueven un incremento de las

A technical selection of suitable agricultural products for the application of radurisation technology

International Nuclear Information System (INIS)

Hill, N.D.

1989-01-01

The commercial utilization of radurization technology has not reached the levels expected due, predominantly, to two contributing factors. Over and above the suspicions held by the consumer towards food radurization, a dearth of information exists regarding the costs of applying this technology. It appears, therefore, that if the question of consumer acceptance is surmounted, an indication of benefit costs would be crucial to convincing potential radurization users whether or not this technology can provide any economic benefit. The range of food and agricultural products consumed in South Africa is very diverse. To determine the radurization benefit cost of each food product consumed in South Africa would, therefore, be a monumental task. As a result an investigation was commissioned by the Study Group for the Techno-Economic Aspects of the Steering Committee for the Marketing of Radurized Food Products. This investigation was aimed, in the first instance, at identifying those food and agricultural products best suited for the application of this technology, thereby creating a short list on which detailed benefit cost analyses could be performed

MODERN TECHNOLOGICAL SOLUTIONS USED IN THE PRODUCTION OF BAKERY PRODUCTS WITH HIGH BIOLOGICAL VALUE

Directory of Open Access Journals (Sweden)

Marta Brodowska

2014-06-01

Full Text Available Biological value of the food products is a result of the presence of bioactive substances and the proportions of the components. Technological development allows to optimize and accelerate the processes of bread production and increase value of food. Bakery industry used whole grains and pseudocereals as additional source of active compounds, biotechnological techniques as using appropriate yeast strain and encapsulation, which provide protection of substance and their controlled release in production of functional bread. The adding to bread fruits, vegetables and condiments may increase content of vitamin, minerals, dietary fiber and other bioactive compounds.

Scientific and technological aspects of the radiopasteurization of egg products

Energy Technology Data Exchange (ETDEWEB)

Etienne, J C; Biltiau, J; Rombaux, J P

1973-11-01

A bibliographic review is presented of the scientific and technological problems in the thermal pasteurization of egg products and the possible advantages of the substitution of radiopasteurization. Current procedures of pasteurization are described. Conditioning of the egg products by congealing or dehydration prior to storage is discussed. A comparative examination is made of the physico-chemical properties of treated egg products and of the organoleptic qualities of the finished product. The present status of radiopasteurization, the problems to be solved, and the economic aspects are discussed. (JSR)

Flotation: A promising microalgae harvesting and dewatering technology for biofuels production.

Science.gov (United States)

Ndikubwimana, Theoneste; Chang, Jingyu; Xiao, Zongyuan; Shao, Wenyao; Zeng, Xianhai; Ng, I-Son; Lu, Yinghua

2016-03-01

Microalgal biomass as renewable energy source is believed to be of great potential for reliable and sustainable biofuels production. However, microalgal biomass production is pinned by harvesting and dewatering stage thus hindering the developing and growing microalgae biotechnology industries. Flotation technology applied in mineral industry could be potentially applied in microalgae harvesting and dewatering, however substantial knowledge on different flotation units is essential. This paper presents an overview on different flotation units as promising cost-effective technologies for microalgae harvesting thus bestowing for further research in development and commercialization of microalgae based biofuels. Dispersed air flotation was found to be less energy consuming. Moreover, Jameson cell flotation and dispersed ozone flotation are believed to be energy efficient microalgae flotation approaches. Microalgae harvesting and dewatering by flotation is still at embryonic stage, therefore extended studies with the focus on life cycle assessment, sustainability of the flotation unit, optimization of the operating parameters using different algal species is imperative. Though there are a number of challenges in microalgae harvesting and dewatering, with well designed and developed cultivation, harvesting/dewatering, extraction and conversion technologies, progressively, microalgae technology will be of great potential for biological carbon sequestration, biofuels and biochemicals production. Copyright © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Combinative Particle Size Reduction Technologies for the Production of Drug Nanocrystals

Directory of Open Access Journals (Sweden)

Jaime Salazar

2014-01-01

Full Text Available Nanosizing is a suitable method to enhance the dissolution rate and therefore the bioavailability of poorly soluble drugs. The success of the particle size reduction processes depends on critical factors such as the employed technology, equipment, and drug physicochemical properties. High pressure homogenization and wet bead milling are standard comminution techniques that have been already employed to successfully formulate poorly soluble drugs and bring them to market. However, these techniques have limitations in their particle size reduction performance, such as long production times and the necessity of employing a micronized drug as the starting material. This review article discusses the development of combinative methods, such as the NANOEDGE, H 96, H 69, H 42, and CT technologies. These processes were developed to improve the particle size reduction effectiveness of the standard techniques. These novel technologies can combine bottom-up and/or top-down techniques in a two-step process. The combinative processes lead in general to improved particle size reduction effectiveness. Faster production of drug nanocrystals and smaller final mean particle sizes are among the main advantages. The combinative particle size reduction technologies are very useful formulation tools, and they will continue acquiring importance for the production of drug nanocrystals.

Innovative assistive technology in Finnish public elderly-care services: a focus on productivity.

Science.gov (United States)

Melkas, Helinä

2013-01-01

The study investigates ways in which technology use may help municipalities improve productivity in elderly-care services. A case study of Finnish elderly-care services provides responses concerning impacts, decisions and options in technology use. The research data were collected during a 'smart home pilot' implemented in four housing service units. Over 60 assistive devices were introduced in the smart homes used during short-term housing periods. Both customers and care staff's experiences as well as processes related to the use of assistive devices were investigated on the basis of survey questionnaires, interviews and feedback. Assistive device-related operational processes were investigated with the help of concepts of 'resource focus', 'lost motion' and 'intermediate storage'. Four central operational processes were identified. Design and desirability as well as costs, such as opportunity costs of assistive devices were also a focus. Significant factors related to productivity were disclosed in this way. Technology use versus productivity needs to be 'circled' from the points of view of individual users, workplaces, service processes, and larger technology options. There must be long-term patience to introduce technology properly into use to produce positive impacts on productivity. Customers and care staff have an interlinked, vital role to play as decision-makers' informants.

Productive Love Promotion Via Affective Technology: An Approach Based On Social Psychology And Philosophy

Directory of Open Access Journals (Sweden)

Ramon Solves Pujol

2010-01-01

Full Text Available This paper proposes the use of social psychological and philosophical foundations for designing affective technology that promotes the experience of love. The adopted theoretical basis is the concept of productive love, which is heavily based on Enrich Fromm but also includes theories and scientific findings of numerous psychoanalysts, social psychologists, and philosophers. We conducted a review of the theory about the nature of love and found that social psychological and philosophical approaches differ regarding peoples' understandings. The findings were used to elaborate eight principles of productive love. Based on these principles, we derived criteria for designing affective technology when the objective is to promote productive love. We reviewed the existent studies on affective technologies and implemented the criteria into a system design, the Pictures' Call. A prototype of the system was pretested to illustrate how productive love technology could be based on established criteria.

Technological trends, global market, and challenges of bio-ethanol production.

Science.gov (United States)

Mussatto, Solange I; Dragone, Giuliano; Guimarães, Pedro M R; Silva, João Paulo A; Carneiro, Lívia M; Roberto, Inês C; Vicente, António; Domingues, Lucília; Teixeira, José A

2010-01-01

Ethanol use as a fuel additive or directly as a fuel source has grown in popularity due to governmental regulations and in some cases economic incentives based on environmental concerns as well as a desire to reduce oil dependency. As a consequence, several countries are interested in developing their internal market for use of this biofuel. Currently, almost all bio-ethanol is produced from grain or sugarcane. However, as this kind of feedstock is essentially food, other efficient and economically viable technologies for ethanol production have been evaluated. This article reviews some current and promising technologies for ethanol production considering aspects related to the raw materials, processes, and engineered strains development. The main producer and consumer nations and future perspectives for the ethanol market are also presented. Finally, technological trends to expand this market are discussed focusing on promising strategies like the use of microalgae and continuous systems with immobilized cells. Copyright © 2010 Elsevier Inc. All rights reserved.

Information Technology in Small Medium Enterprise: Logistic and Production Processes

Directory of Open Access Journals (Sweden)

Maurizio Pighin

2017-01-01

Full Text Available This paper presents and discuss a survey which describes how small-medium enterprises (SMEs implement and use their information system with respect to their logistic and production processes. The study first describes the rationale of the research, then it identifies the characteristics of the companies and detects their general attitude towards information technology (IT. In the following section the paper presents a set of detailed processes to verify the structure and workflow of companies and how IT supports their processes. In the last part we study the influence of some company characteristics to effective use of processes and to different technological approaches, to support defined logistic and production processes. The novelty of the study and its interest, both in academic and institutional context as in the real world, resides in the opportunity to verify and understand the different attitudes of SMEs towards information technology in defining, organizing, planning and control their processes.

Depleted uranium as a by product of nuclear technology

International Nuclear Information System (INIS)

Orlic, M.

2000-01-01

Depleted uranium (DU) has been used during the War in Yugoslavia in the year 1999 by NATO forces, as well as in Bosnia and Gulf War. In Yugoslavia it has been used in two modalities: as ammunition (mostly caliber 30 mm) and as a part of cruise missiles (counterweight penetrator). Total amount of DU in Yugoslavia was about 10 tons. DU is a by product of nuclear technology and represents low-level nuclear waste. Therefore it should be stored. But, because of military application it is in the environment where it could react chemo toxically or radio toxically and so endanger people and animals. This paper contains all relevant technology parameters of DU created as a by product, DU physical and chemical properties, DU ammunition effects, environmental DU transport, and estimation of consequences on people and environment

ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT, BAGHOUSE FILTRATION PRODUCTS, TETRATEC PTFE PRODUCTS, TETRATEX 6212 FILTER SAMPLE

Science.gov (United States)

Baghouse filtration products (BFPs) were evaluated by the Air Pollution Control Technology (APCT) Verification Center. The performance factor verified was the mean outlet particle concentration for the filter fabric as a function of the size of those particles equal to and smalle...

High Temperature Electrolysis for Hydrogen Production from Nuclear Energy – TechnologySummary

Energy Technology Data Exchange (ETDEWEB)

J. E. O' Brien; C. M. Stoots; J. S. Herring; M. G. McKellar; E. A. Harvego; M. S. Sohal; K. G. Condie

2010-02-01

The Department of Energy, Office of Nuclear Energy, has requested that a Hydrogen Technology Down-Selection be performed to identify the hydrogen production technology that has the best potential for timely commercial demonstration and for ultimate deployment with the Next Generation Nuclear Plant (NGNP). An Independent Review Team has been assembled to execute the down-selection. This report has been prepared to provide the members of the Independent Review Team with detailed background information on the High Temperature Electrolysis (HTE) process, hardware, and state of the art. The Idaho National Laboratory has been serving as the lead lab for HTE research and development under the Nuclear Hydrogen Initiative. The INL HTE program has included small-scale experiments, detailed computational modeling, system modeling, and technology demonstration. Aspects of all of these activities are included in this report. In terms of technology demonstration, the INL successfully completed a 1000-hour test of the HTE Integrated Laboratory Scale (ILS) technology demonstration experiment during the fall of 2008. The HTE ILS achieved a hydrogen production rate in excess of 5.7 Nm3/hr, with a power consumption of 18 kW. This hydrogen production rate is far larger than has been demonstrated by any of the thermochemical or hybrid processes to date.

Advanced biomass science and technology for bio-based products: proceedings

Science.gov (United States)

Chung Hse; Zehui Jiang; Mon-Lin Kuo

2009-01-01

This book was developed from the proceedings of the Advanced Biomass Science and Technology for Bio-Based Products Symposium held in Beijing, China, May 23-25, 2007. The symposium was designed to provide a forum for researchers, producers, and consumers of biomass and bio-based products; to exchange information and ideas; and to stimulate new research and...

The NASA In-Space Propulsion Technology Project, Products, and Mission Applicability

Science.gov (United States)

Anderson, David J.; Pencil, Eric; Liou, Larry; Dankanich, John; Munk, Michelle M.; Kremic, Tibor

2009-01-01

The In-Space Propulsion Technology (ISPT) Project, funded by NASA s Science Mission Directorate (SMD), is continuing to invest in propulsion technologies that will enable or enhance NASA robotic science missions. This overview provides development status, near-term mission benefits, applicability, and availability of in-space propulsion technologies in the areas of aerocapture, electric propulsion, advanced chemical thrusters, and systems analysis tools. Aerocapture investments improved: guidance, navigation, and control models of blunt-body rigid aeroshells; atmospheric models for Earth, Titan, Mars, and Venus; and models for aerothermal effects. Investments in electric propulsion technologies focused on completing NASA s Evolutionary Xenon Thruster (NEXT) ion propulsion system, a 0.6 to 7 kW throttle-able gridded ion system. The project is also concluding its High Voltage Hall Accelerator (HiVHAC) mid-term product specifically designed for a low-cost electric propulsion option. The primary chemical propulsion investment is on the high-temperature Advanced Material Bipropellant Rocket (AMBR) engine providing higher performance for lower cost. The project is also delivering products to assist technology infusion and quantify mission applicability and benefits through mission analysis and tools. In-space propulsion technologies are applicable, and potentially enabling for flagship destinations currently under evaluation, as well as having broad applicability to future Discovery and New Frontiers mission solicitations.

Lactose hydrolysis and milk powder production: technological aspects

Directory of Open Access Journals (Sweden)

Jansen Kelis Ferreira Torres

2017-06-01

Full Text Available The food industry has the challenge and the opportunity to develop new products with reduced or low lactose content in order to meet the needs of a growing mass of people with lactose intolerance. The manufacture of spray dried products with hydrolyzed lactose is extremely challenging. These products are highly hygroscopic, which influence the productivity and conservation of the powders, not to mention the undesirable and inevitable technological problem of constant clogging of drying chambers. The aim of this study was to evaluate the effect of different levels (0%, 25%, 50%, 75% and > 99% of enzymatic lactose hydrolysis on the production and storage of whole milk powder. The samples were processed in a pilot plant and characterized in relation to their composition analysis; to their degree of hydrolysis of lactose; and to their sorption isotherms. The results indicated the hydrolysis of lactose may affect the milk powder production due to a higher extent of powder adhesion within the spray dryer chambers and due to a higher tendency to absorb water during storage.

New Products and Technologies, Based on Calculations Developed Areas

Directory of Open Access Journals (Sweden)

Gheorghe Vertan

2013-09-01

Full Text Available Following statistics, currently prosperous and have high GDP / capita, only countries that have and fructify intensively large natural resources and/or produce and export products massive based on patented inventions accordingly. Without great natural wealth and the lowest GDP / capita in the EU, Romania will prosper only with such products. Starting from the top experience in the country, some patented, can develop new and competitive technologies and patentable and exportable products, based on exact calculations of developed areas, such as that double shells welded assemblies and plating of ships' propellers and blade pump and hydraulic turbines.

Development of fission Mo production technology

International Nuclear Information System (INIS)

Kim, B. K.; Park, K. B.; Jun, B. J.; Park, J. H.; Choung, W. M.; Lee, K. I.; Woo, M. S.; Whang, D. S.; Kim, Y. K.; Yoo, J. H.; Sohn, D. S.; Lee, Y. W.; Na, S. H.; Koo, Y. H.; Hwang, D. H.; Joo, P. K.

1997-08-01

The feasibility study is accomplished in this project for the development of fission moly production. The KAERI process proposed for development in KAERI is discussed together with those of the American Cintichem and Russian IPPE, each of which would be plausible for introduction whenever the indigenous development is not much feasible. For the conceptual design of the KAERI irradiation target, analysis method is set up and some preliminary analysis is performed accordingly for the candidate design. To establish chemical process concepts for the afore-mentioned three processes, characteristics, operation conditions, and the management of the generated wastes are investigated. Basic requirements of hotcell facilities for chemical processing and a possible way of utilizing the existing hotcells are discussed in parallel with the counter-measures for the construction of new hotcell facilities. Various conditions of target irradiation for fission moly production in Hanaro are analyzed. Plan for introduction of the relevant technology introduction and for procurement of highly enriched uranium are considered. On the basis of assuming some conditions, the economic feasibility study for fission moly production is also overviewed. (author). 22 refs., 28 tabs., 24 figs

Technology versus Agro-Ecology in Designing Vegetable Production Systems in the Netherlands

NARCIS (Netherlands)

Haan, de J.J.; Sukkel, W.; Stilma, E.S.C.

2010-01-01

Current open field vegetable production systems in the Netherlands do not meet market and societal demands. These demands could not be fulfilled by adapting current production systems. Other kinds of production systems are needed and therefore two types of systems are designed by 1) a technological

Reflections on the Development of a Machine Vision Technology for the Forest Products

Science.gov (United States)

Richard W. Conners; D.Earl Kline; Philip A. Araman; Robert L. Brisbon

1992-01-01

The authors have approximately 25 years experience in developing machine vision technology for the forest products industry. Based on this experience this paper will attempt to realistically predict what the future holds for this technology. In particular, this paper will attempt to describe some of the benefits this technology will offer, describe how the technology...

Developing technology for large-scale production of forest chips. Wood Energy Technology Programme 1999-2003. Interim report

International Nuclear Information System (INIS)

Hakkila, P.

2003-01-01

Finland is enhancing its use of renewable sources in energy production. From the 1995 level, the use of renewable energy is to be increased by 50 % by 2010, and 100 % by 2025. Wood-based fuels will play a leading role in this development. The main source of wood-based fuels is processing residues from the forest industries. However, as all processing residues are already in use, an increase is possible only as far as the capacity and wood consumption of the forest industries grow. Energy policy affects the production and availability of processing residues only indirectly. Another large source of wood-based energy is forest fuels, consisting of traditional firewood and chips comminuted from low-quality biomass. It is estimated that the reserve of technically harvest-able forest biomass is 10-16 Mm' annually, when no specific cost limit is applied. This corresponds to 2-3 Mtoe or 6-9 % of the present consumption of primary energy in Finland. How much of this re-serve it will actually be possible to harvest and utilize depends on the cost competitiveness of forest chips against alternative sources of energy. A goal of Finnish energy and climate strategies is to use 5 Mm' forest chips annually by 2010. The use of wood fuels is being promoted by means of taxation, investment aid and support for chip production from young forests. Furthermore, research and development is being supported in order to create techno-economic conditions for the competitive production of forest chips. In 1999, the National Technology Agency Tekes established the five-year Wood Energy Technology Programme to stimulate the development of efficient systems for the large-scale production of forest chips. Key tar-gets are competitive costs, reliable supply and good quality chips. The two guiding principles of the programme are: (1) close cooperation between researchers and practitioners and (2) to apply research and development to the practical applications and commercialization. As of November

Emerging technology: A key enabler for modernizing pharmaceutical manufacturing and advancing product quality.

Science.gov (United States)

O'Connor, Thomas F; Yu, Lawrence X; Lee, Sau L

2016-07-25

Issues in product quality have produced recalls and caused drug shortages in United States (U.S.) in the past few years. These quality issues were often due to outdated manufacturing technologies and equipment as well as lack of an effective quality management system. To ensure consistent supply of safe, effective and high-quality drug products available to the patients, the U.S. Food and Drug Administration (FDA) supports modernizing pharmaceutical manufacturing for improvements in product quality. Specifically, five new initiatives are proposed here to achieve this goal. They include: (i) advancing regulatory science for pharmaceutical manufacturing; (ii) establishing a public-private institute for pharmaceutical manufacturing innovation; (iii) creating incentives for investment in the technological upgrade of manufacturing processes and facilities; (iv) leveraging external expertise for regulatory quality assessment of emerging technologies; and (v) promoting the international harmonization of approaches for expediting the global adoption of emerging technologies. Published by Elsevier B.V.

Technology for biomass feedstock production in southern forests and GHG implications

Science.gov (United States)

Bob Rummer; John Klepac; Jason Thompson

2012-01-01

Woody biomass production in the South can come from four distinct feedstocks - logging residues, thinnings, understory harvesting, or energywood plantations. A range of new technology has been developed to collect, process and transport biomass and a key element of technology development has been to reduce energy consumption. We examined three different woody feedstock...

Technological capabilities, institutions and firm productivity: a multilevel study

Czech Academy of Sciences Publication Activity Database

Goedhuys, M.; Srholec, Martin

2015-01-01

Roč. 27, č. 1 (2015), s. 122-139 ISSN 0957-8811 R&D Projects: GA ČR(CZ) GAP402/10/2310 Institutional support: RVO:67985998 Keywords : productivity * innovation * technological capability Subject RIV: AH - Economics Impact factor: 0.720, year: 2015

Nanometer size diesel exhaust particles are selectively toxic to dopaminergic neurons: the role of microglia, phagocytosis, and NADPH oxidase.

Science.gov (United States)

Block, M L; Wu, X; Pei, Z; Li, G; Wang, T; Qin, L; Wilson, B; Yang, J; Hong, J S; Veronesi, B

2004-10-01

The contributing role of environmental factors to the development of Parkinson's disease has become increasingly evident. We report that mesencephalic neuron-glia cultures treated with diesel exhaust particles (DEP; 0.22 microM) (5-50 microg/ml) resulted in a dose-dependent decrease in dopaminergic (DA) neurons, as determined by DA-uptake assay and tyrosine-hydroxylase immunocytochemistry (ICC). The selective toxicity of DEP for DA neurons was demonstrated by the lack of DEP effect on both GABA uptake and Neu-N immunoreactive cell number. The critical role of microglia was demonstrated by the failure of neuron-enriched cultures to exhibit DEP-induced DA neurotoxicity, where DEP-induced DA neuron death was reinstated with the addition of microglia to neuron-enriched cultures. OX-42 ICC staining of DEP treated neuron-glia cultures revealed changes in microglia morphology indicative of activation. Intracellular reactive oxygen species and superoxide were produced from enriched-microglia cultures in response to DEP. Neuron-glia cultures from NADPH oxidase deficient (PHOX-/-) mice were insensitive to DEP neurotoxicity when compared with control mice (PHOX+/+). Cytochalasin D inhibited DEP-induced superoxide production in enriched-microglia cultures, implying that DEP must be phagocytized by microglia to produce superoxide. Together, these in vitro data indicate that DEP selectively damages DA neurons through the phagocytic activation of microglial NADPH oxidase and consequent oxidative insult.

Sustainable recycling of automotive products in China: Technology and regulation

Science.gov (United States)

Chen, Ming

2006-08-01

The Chinese economy is growing rapidly, but accompanyingsuch growth are issues of environmental protection and social inequity which must be addressed. With the Automobile Industry Development Policy and the Motor Vehicle Product Recovery Technology Policy, an automobile products recoverability target has been established and will be incorporated into an automobile products authentication management system in China. By 2010, for all end-of-life automobile products, reuse and recovery shall be increased to a minimum of 85% by average weight per vehicle, and the use of lead, mercury, cadmium, and hexavalent chromium is prohibited. This paper will address the sustainable recycling of Chinese automobile products within the period of 2006 2010.

Pulmonary exposure to particles from diesel exhaust, urban dust or single-walled carbon nanotubes and oxidatively damaged DNA and vascular function in apoE(-/-)mice

DEFF Research Database (Denmark)

Vesterdal, Lise K; Jantzen, Kim; Sheykhzade, Majid

2012-01-01

Abstract This study compared the oxidative stress level and vasomotor dysfunction after exposure to urban dust, diesel exhaust particles (DEP) or single-walled carbon nanotubes (SWCNT). DEP and SWCNT increased the production of reactive oxygen species (ROS) in cultured endothelial cells and acell......Abstract This study compared the oxidative stress level and vasomotor dysfunction after exposure to urban dust, diesel exhaust particles (DEP) or single-walled carbon nanotubes (SWCNT). DEP and SWCNT increased the production of reactive oxygen species (ROS) in cultured endothelial cells...... and acellullarly, whereas the exposure to urban dust did not generate ROS. ApoE(-/-) mice, which were exposed twice to 0.5 mg/kg of the particles by intratracheal instillation, had unaltered acetylcholine-elicited vasorelaxation in aorta segments. There was unaltered pulmonary expression level of Vcam-1, Icam-1...

Roles Prioritization of Hydrogen Production Technologies for Promoting Hydrogen Economy in the Current State of China

DEFF Research Database (Denmark)

Ren, Jingzheng; Gao, Suzhao; Tan, Shiyu

2015-01-01

Hydrogen production technologies play an important role in the hydrogen economy of China. However, the roles of different technologies played in promoting the development of hydrogen economy are different. The role prioritization of various hydrogen production technologies is of vital importance...... information. The prioritization results by using the proposed method demonstrated that the technologies of coal gasification with CO2 capture and storage and hydropower-based water electrolysis were regarded as the two most important hydrogen production pathways for promoting the development of hydrogen...... for the stakeholders/decision-makers to plan the development of hydrogen economy in China and to allocate the finite R&D budget reasonably. In this study, DPSIR framework was firstly used to identify the key factors concerning the priorities of various hydrogen production technologies; then, a fuzzy group decision...

Carbon dioxide emission in hydrogen production technology from coke oven gas with life cycle approach

Directory of Open Access Journals (Sweden)

Burmistrz Piotr

2016-01-01

Full Text Available The analysis of Carbon Footprint (CF for technology of hydrogen production from cleaned coke oven gas was performed. On the basis of real data and simulation calculations of the production process of hydrogen from coke gas, emission indicators of carbon dioxide (CF were calculated. These indicators are associated with net production of electricity and thermal energy and direct emission of carbon dioxide throughout a whole product life cycle. Product life cycle includes: coal extraction and its transportation to a coking plant, the process of coking coal, purification and reforming of coke oven gas, carbon capture and storage. The values were related to 1 Mg of coking blend and to 1 Mg of the hydrogen produced. The calculation is based on the configuration of hydrogen production from coke oven gas for coking technology available on a commercial scale that uses a technology of coke dry quenching (CDQ. The calculations were made using ChemCAD v.6.0.2 simulator for a steady state of technological process. The analysis of carbon footprint was conducted in accordance with the Life Cycle Assessment (LCA.

High-Technology Companies Often Turn to Colleges for Confidential 'Beta Tests' of New Products.

Science.gov (United States)

Turner, Judith Axler

1988-01-01

Beta testing--the process of trying a product in a real-world setting before releasing it commercially--exploits a natural interface between universities and high-technology industries. High-tech companies need confidential, real-world tests of new products, and universities are eager to get an early look at tomorrow's technology. (MLW)

Application of dynamic compaction technology for high performance and precision powder products

International Nuclear Information System (INIS)

Lee, Chang Kyu; Lee, Jung Gu; Lee, Min Ku; Uhm, Young Rang; Park, Jin Ju; Lee, Gyeong Ja; Hong, Soon Jik

2011-06-01

The automation technology of magnetic pulsed compaction (MPC) has been developed for mass production of high performance powder products by dynamic compaction method. The pulse power equipment in MPC system has been modified for improved lifetime and productivity, so the modified one can produce high-density compacts at a rate of 10 times/min with semipermanent lifetime. Using this modified pulse power equipment, two types of automated MPC apparatus were constructed, which are operated by mechanical and hydraulic driving systems, respectively. By repeated compaction operations at a rate of 5 times/min, durability and productivity of these automated apparatus have been proven to be suitable for mass production. In addition, the lifetime of mold and punch for MPC has been improved by optimizing design and material as well as employing new lubrication system. By applying such automated MPC apparatus, detailed mass production technologies have been developed for several powder products such as diamond drilling segments, ceramic targets for optical coating, silver coins for water disinfection and small powder products for automobile. The developed powder products showed improved performance as compared to commercial ones, so they will be mass-produced industrially before long

Innovation in technology for the least product price and cost - a new minimum cost relation for reductions during technological learning

International Nuclear Information System (INIS)

Duffey, R.B.

2004-01-01

By analogy with the concepts of human learning, we show and introduce a new method to obtain least product cost and price that includes the effect of innovation and technological learning in manufacturing and production. This key result is a new paradigm instead of the usual economic 'power law' formulation. The new analysis is based on extensive analysis of many technological systems, and is directly related to the presence of learning as experience is accumulated. The results agree with the observed data. By using a consistent basis, the method replaces previous empirical 'power law' descriptions of the technological learning curve with a new 'marginal minimum cost equation' (MCE). (author)

TECHNOLOGICAL ASPECTS OF PRODUCTION OF THE CANDIED FRUITS FROM NON-TRADITIONAL RAW MATERIAL

Directory of Open Access Journals (Sweden)

I. R. Belenkaya

2016-08-01

Full Text Available The article analyses the candied fruit market in Ukraine and describes the main technological operations pertainingto processing of non-traditional candied products – celery and parsnip roots. Darkening of the roots surface caused bythe enzyme oxidation is one of the problems arising when processing white roots, which leads to worse marketable conditionof the product. To prevent darkening, the developed technology provides for soaking raw material in 1% citric acid solutionimmediately after peeling. To improve the diffusion and osmotic processes and to soften roots before boiling in sugar syrup,the steam blanching has been applied. The constructed Gantt diagram proves that the developed technology can shorten thecandied fruit cooking period. The biochemical indicators of the obtained new products have been studied. It was establishedthat the candied fruit possess the appropriate physical and chemical indicators and original organoleptic properties resulting ina demand by consumers. The results of the taste evaluation of the experimental specimen confirmed a high quality of the products.

Identification of intentionally and non-intentionally added substances in plastic packaging materials and their migration into food products.

Science.gov (United States)

García Ibarra, Verónica; Rodríguez Bernaldo de Quirós, Ana; Paseiro Losada, Perfecto; Sendón, Raquel

2018-05-07

Plastic materials are widely used in food packaging applications; however, there is increased concern because of the possible release of undesirable components into foodstuffs. Migration of plastic constituents not only has the potential to affect product quality but also constitutes a risk to consumer health. In order to check the safety of food contact materials, analytical methodologies to identify potential migrants are required. In the first part of this work, a GC/MS screening method was developed for the identification of components from plastic packaging materials including intentionally and "non-intentionally added substances" (NIAS) as potential migrants. In the second part of this study, the presence of seven compounds (bis (2-ethylhexyl) phthalate (DEHP), diethyl phthalate (DEP), diisobutyl phthalate (DIBP), dibutyl phthalate (DBP), butylated hydroxytoluene (BHT), acetyl tributyl citrate (ATBC), benzophenone (BP)) previously identified in packaging materials were investigated in food products (corn and potatoes snacks, cookies, and cakes). For this purpose, a suitable extraction method was developed and quantification was performed using GC-MS. The developed method was validated in terms of linearity, recovery, repeatability, and limits of detection and quantification. The spiked recoveries varied between 82.7 and 116.1%, and relative standard deviation (RSD) was in the range of 2.22-15.9%. The plasticizer ATBC was the most detected compound (94% samples), followed by DEP (65%), DEHP (47%), BP (44%), DBP (35%), DIBP (21%), and BHT (12%). Regarding phthalates, DEP and DEHP were the most frequently detected compounds in concentrations up to 1.44 μg g -1 . In some samples, only DBP exceeded the European SML of 0.3 mg kg -1 established in Regulation 10/2011. Graphical abstract Chemical migration from plastic packaging into food.

NASA Technologies for Product Identification

Science.gov (United States)

Schramm, Fred, Jr.

2006-01-01

Since 1975 bar codes on products at the retail counter have been accepted as the standard for entering product identity for price determination. Since the beginning of the 21st century, the Data Matrix symbol has become accepted as the bar code format that is marked directly on a part, assembly or product that is durable enough to identify that item for its lifetime. NASA began the studies for direct part marking Data Matrix symbols on parts during the Return to Flight activities after the Challenger Accident. Over the 20 year period that has elapsed since Challenger, a mountain of studies, analyses and focused problem solutions developed by and for NASA have brought about world changing results. NASA Technical Standard 6002 and NASA Handbook 6003 for Direct Part Marking Data Matrix Symbols on Aerospace Parts have formed the basis for most other standards on part marking internationally. NASA and its commercial partners have developed numerous products and methods that addressed the difficulties of collecting part identification in aerospace operations. These products enabled the marking of Data Matrix symbols in virtually every situation and the reading of symbols at great distances, severe angles, under paint and in the dark without a light. Even unmarkable delicate parts now have a process to apply a chemical mixture called NanocodesTM that can be converted to a Data Matrix. The accompanying intellectual property is protected by 10 patents, several of which are licensed. Direct marking Data Matrix on NASA parts virtually eliminates data entry errors and the number of parts that go through their life cycle unmarked, two major threats to sound configuration management and flight safety. NASA is said to only have people and stuff with information connecting them. Data Matrix is one of the most significant improvements since Challenger to the safety and reliability of that connection. This presentation highlights the accomplishments of NASA in its efforts to develop

Electrospinning versus fibre production methods: from specifics to technological convergence.

Science.gov (United States)

Luo, C J; Stoyanov, Simeon D; Stride, E; Pelan, E; Edirisinghe, M

2012-07-07

Academic and industrial research on nanofibres is an area of increasing global interest, as seen in the continuously multiplying number of research papers and patents and the broadening range of chemical, medical, electrical and environmental applications. This in turn expands the size of the market opportunity and is reflected in the significant rise of entrepreneurial activities and investments in the field. Electrospinning is probably the most researched top-down method to form nanofibres from a remarkable range of organic and inorganic materials. It is well known and discussed in many comprehensive studies, so why this review? As we read about yet another "novel" method producing multifunctional nanomaterials in grams or milligrams in the laboratory, there is hardly any research addressing how these methods can be safely, consistently and cost-effectively up-scaled. Despite two decades of governmental and private investment, the productivity of nanofibre forming methods is still struggling to meet the increasing demand. This hinders the further integration of nanofibres into practical large-scale applications and limits current uses to niche-markets. Looking into history, this large gap between supply and demand of synthetic fibres was seen and addressed in conventional textile production a century ago. The remarkable achievement was accomplished via extensive collaborative research between academia and industry, applying ingenious solutions and technological convergence from polymer chemistry, physical chemistry, materials science and engineering disciplines. Looking into the present, current advances in electrospinning and nanofibre production are showing similar interdisciplinary technological convergence, and knowledge of industrial textile processing is being combined with new developments in nanofibre forming methods. Moreover, many important parameters in electrospinning and nanofibre spinning methods overlap parameters extensively studied in industrial

A dielectrophoretic method of discrimination between normal oral epithelium, and oral and oropharyngeal cancer in a clinical setting.

Science.gov (United States)

Graham, K A; Mulhall, H J; Labeed, F H; Lewis, M P; Hoettges, K F; Kalavrezos, N; McCaul, J; Liew, C; Porter, S; Fedele, S; Hughes, M P

2015-08-07

Despite the accessibility of the oral cavity to clinical examination, delays in diagnosis of oral and oropharyngeal carcinoma (OOPC) are observed in a large majority of patients, with negative impact on prognosis. Diagnostic aids might help detection and improve early diagnosis, but there remains little robust evidence supporting the use of any particular diagnostic technology at the moment. The aim of the present feasibility first-in-human study was to evaluate the preliminary diagnostic validity of a novel technology platform based on dielectrophoresis (DEP). DEP does not require labeling with antibodies or stains and it is an ideal tool for rapid analysis of cell properties. Cells from OOPC/dysplasia tissue and healthy oral mucosa were collected from 57 study participants via minimally-invasive brush biopsies and tested with a prototype DEP platform using median membrane midpoint frequency as main analysis parameter. Results indicate that the current DEP platform can discriminate between brush biopsy samples from cancerous and healthy oral tissue with a diagnostic sensitivity of 81.6% and a specificity of 81.0%. The present ex vivo results support the potential application of DEP testing for identification of OOPC. This result indicates that DEP has the potential to be developed into a low-cost, rapid platform as an assistive tool for the early identification of oral cancer in primary care; given the rapid, minimally-invasive and non-expensive nature of the test, dielectric characterization represents a promising platform for cost-effective early cancer detection.

Applications of gene-based technologies for improving animal production and health in developing countries

International Nuclear Information System (INIS)

Makkar, H.P.S.; Viljoen, G.J.

2005-01-01

This book provides a compilation of peer-reviewed scientific contributions from authoritative researchers attending an international symposium convened by the Animal Production and Health Sub-programme of the Animal Production and Health (APH), Joint FAO/IAEA Programme in cooperation with the Animal Production and Health Division of the FAO. These Proceedings contain invaluable information on the role and future potential of gene-based technologies for improving animal production and health, possible applications and constraints in the use of this technology in developing countries and their specific research needs

Advances in solid-catalytic and non-catalytic technologies for biodiesel production

International Nuclear Information System (INIS)

Islam, Aminul; Taufiq-Yap, Yun Hin; Chan, Eng-Seng; Moniruzzaman, M.; Islam, Saiful; Nabi, Md. Nurun

2014-01-01

Highlights: • The recent technologies for promoting biodiesel synthesis were elucidated. • The design of catalyst consideration of biodiesel production was proposed. • The recent advances and remaining difficulties in biodiesel synthesis were outlined. • The future research trend in biodiesel synthesis was highlighted. - Abstract: The insecure supply of fossil fuel coerces the scientific society to keep a vision to boost investments in the renewable energy sector. Among the many renewable fuels currently available around the world, biodiesel offers an immediate impact in our energy. In fact, a huge interest in related research indicates a promising future for the biodiesel technology. Heterogeneous catalyzed production of biodiesel has emerged as a preferred route as it is environmentally benign needs no water washing and product separation is much easier. The number of well-defined catalyst complexes that are able to catalyze transesterification reactions efficiently has been significantly expanded in recent years. The activity of catalysts, specifically in application to solid acid/base catalyst in transesterification reaction depends on their structure, strength of basicity/acidity, surface area as well as the stability of catalyst. There are various process intensification technologies based on the use of alternate energy sources such as ultrasound and microwave. The latest advances in research and development related to biodiesel production is represented by non-catalytic supercritical method and focussed exclusively on these processes as forthcoming transesterification processes. The latest developments in this field featuring highly active catalyst complexes are outlined in this review. The knowledge of more extensive research on advances in biofuels will allow a deeper insight into the mechanism of these technologies toward meeting the critical energy challenges in future

Vaccine manufacturing and technology: from biotechnological platforms to syntethic epitopes, current viepoint.

Science.gov (United States)

Ignateva, G A

2016-01-01

The Purposes: the review take into account short history of vaccination practice and development of vaccine technology. In the review we include data from several monographs about manufacturing of vaccines published by authors from such companies as Merck & Co; Sanofi Pasteur; Dynavax Europe/Rhein Biotech GmbH; Latham Biopharm Group; Aridis Pharmaceuticals LLC; Genentech; Amgen; Shamir Biologics LLC; Biopharm Services US; Novartis Pharma AG, аnd several research centers: Laboratory of Bacterial Polysaccharides, Center for Biologics Evaluation and Research; Purdue University, West Lafayette, IN, US; Department of Pharmaceutical Chemistry, Univ. Of Kansas; Max Planck Institute for dynamics of Complex Technical Systems; Fraunhofer USA Center for Molecular Biotechnology; US Dep. of Agriculture Animal and Plant Health Inspection Service, etc. In historic literature there are data about inoculation practices in antique China, Persia, India, Byzantium, native Americans, some African population. In modern immunology since the end of XIX century the vaccines were produced at the in vivo platforms - in animals (rabbits, mice, cows). Since 1931 due to E. Goodpasture' elaboration most virus vaccines were and are produced at the in ovo platform. In 1949 J.F. Enders elaborated large-scale polio virus production in the primary culture of monkey kidney cells in vitro. Up to day primary culture of chiken embrio fibroblasts are used to large-scale production of vaccine viruses of measles, mumps, rabies. Since 2000-th in Western countries most part of virus vaccines were began to produced via a cultivation in continuous tumor cell lines. The last technology is the most low cost for large-scale production of vaccines. We review several new biotechnological platforms for the production of the recombinant protein or virus-like particles as subunit vaccines: plant system, algae, mushrooms, insect cells, etc. Beside of good purpose of vaccination - prophylactic of several infectious

Using of material-technological modelling for designing production of closed die forgings

Science.gov (United States)

Ibrahim, K.; Vorel, I.; Jeníček, Š.; Káňa, J.; Aišman, D.; Kotěšovec, V.

2017-02-01

Production of forgings is a complex and demanding process which consists of a number of forging operations and, in many cases, includes post-forge heat treatment. An optimized manufacturing line is a prerequisite for obtaining prime-quality products which in turn are essential to profitable operation of a forging company. Problems may, however, arise from modifications to the manufacturing route due to changing customer needs. As a result, the production may have to be suspended temporarily to enable changeover and optimization. Using material-technological modelling, the required modifications can be tested and optimized under laboratory conditions outside the plant without disrupting the production. Thanks to material-technological modelling, the process parameters can be varied rapidly in response to changes in market requirements. Outcomes of the modelling runs include optimum parameters for the forging part’s manufacturing route, values of mechanical properties, and results of microstructure analysis. This article describes the use of material-technological modelling for exploring the impact of the amount of deformation and the rate of cooling of a particular forged part from the finish-forging temperature on its microstructure and related mechanical properties.

How to consistently make your product, technology or system more environmentally-sustainable?

DEFF Research Database (Denmark)

Laurent, Alexis; Cosme, Nuno Miguel Dias; Molin, Christine

Human activities are currently uns ustainable, causing many damages to ecosystems, human health and natural resources. In this setting, the development of new products and technologies has been increasingly required to relate to sustainability and ensure that such development goes hand -in-hand w...... of the system. We rely on state-of -the-art science in the food sector, the aquaculture sector and the energy sector to showcase and illustrate the potential of LCA to undertake the environmental sustainability challenge and support product/technology/system development....

Enterprise technology in support for accounting information systems. an innovation and productivity approach

Directory of Open Access Journals (Sweden)

Jose Melchor Medina-Quintero

2015-09-01

Full Text Available Technology and the accounting information systems are implemented in an organization with the aim of improving their efficiency. Companies spend large amounts of money on these tools every year in order to improve their organizational performance. The aim of this research is to determine the influence of SMEs’ technological alignment, information management and technological infrastructure on the performance of an institution (innovation and productivity in which accounting information systems are used. An empirical study is conducted in enterprises belonging to the service, commercial and industrial sectors in Ciudad Victoria, México, with the help of the SmartPLS statistical tool. The results mainly show that technology has helped raise productivity (improvement in administrative activities, in decision-making and in the use of generated information.

TECHNOLOGICAL PROCESSES OF PRODUCTION OF THE MASS FUNCTION CAST BARS

Directory of Open Access Journals (Sweden)

A. N. Krutilin

2012-01-01

Full Text Available A number of scientifically grounded technical decisions, the whole set of which has enabled to create technological processes of production of high-quality cast bars of mass appointment is offered.

Dynamic integrated assessment of bioenergy technologies for energy production utilizing agricultural residues: An input–output approach

International Nuclear Information System (INIS)

Song, Junnian; Yang, Wei; Higano, Yoshiro; Wang, Xian’en

2015-01-01

Highlights: • A dynamic input–output model is developed with bioenergy technologies complemented. • Availability of agricultural residues for bioenergy technologies is evaluated. • Trends in electricity and biofuel production are simulated dynamically. • Net profit and GHG mitigation contribution of bioenergy technologies are assessed. • Combustion power generation and briquette fuel are more advantageous. - Abstract: In order to facilitate regional agricultural residue utilization for energy production through bioenergy technologies, a dynamic input–output model is developed to estimate and assess the energy, economic and environmental performances of industrialization of five bioenergy technologies within a 15-year time horizon. Electricity and solid, gaseous and liquid biofuels are energy products of bioenergy technologies. Bioenergy technologies are complemented into regional input–output framework and combined with socioeconomic activities aided by their bottom-up economic and energy parameters. The simulation results for the target area indicate that the agricultural residues available for bioenergy technologies could amount to 55.16 million t, facilitating to 8.38 million t coal-equivalent bioenergy production by 2025. A 3.1% net reduction in accumulative greenhouse gas emission compared with the “business as usual” case could be achieved owing to substitution of fossil energy with electricity and biofuels produced by bioenergy technologies. From energy production, economic benefits and greenhouse gas mitigation three aspects integratedly, direct-combustion power generation and briquette fuel are more advantageous in the target area. The quantified energy, economic and environmental performances of bioenergy technologies are expected to give recommendations for their industrial development.

Process technology for refining crude soybean oil – a product from ...

African Journals Online (AJOL)

Process technology for refining crude soybean oil – a product from soycake meal production in Ghana. ... yield of 83.3 per cent was recorded. Results of quality assessment of the final laboratory refined oil compared favourably with Ghana Standards Board's specification for edible soybean oil. Ghana Journal of Science Vol.

A review on the current status and production technology of {sup 32,} {sup 33}P-orthophosphoric acid

Energy Technology Data Exchange (ETDEWEB)

Park, Ul Jae; Han, Hyun Soo; Cho, Woon Kap; Kuznetsov, Rostislav A

2000-10-01

The current status of {sup 32}, {sup 33}P-Orthophosphoric acid production technology is reviewed. The following aspects of the technology are covered: - production of phosphorus-32 and phosphorus-33 using various nuclear reactions; - chemical properties of sulfur and phosphorus effecting the technology of radioactive phosphorus production; - chemical state of {sup 32}, {sup 33}P in neutron irradiated sulfur; - the technology of radioactive phosphorus isolation from neutron irradiated target and orthophosphoric acid production; - purification of {sup 32}, {sup 33}P-orthophosphoric acid from impurities and some related problems, like the nature of impurities, the storage of the final product, etc. - the quality control procedures of carrier-free ({sup 32}, {sup 33}P)-orthophosphoric acid preparations.

The humanity at the frontiers with new technologies for sustained energy production

International Nuclear Information System (INIS)

Florescu, Gheorghe; Agapi, Constantin; Mircea, Ioan; Gyongyosi, Tiberiu; Panaitescu, Valeriu; Florescu, Ioan-Bogdan

2009-01-01

The international scientific community is engaged in dealing with the actual nuclear research issues and in finding new ways for continuous and raising energy production. The big energy consumption and occurrence of new large consumers, especially in Asian countries, impose finding new solutions for clean, large scale and sustained energy production. The new technologies and scientific discoveries, also the international cooperation, offer opportunities to eliminate the actual barriers in order to cumulate and use advanced energy production processes, to find new energy sources and to build improved power plants. The paper presents the actual state of the art in the field of new technologies for nuclear power sources, the steps to be undertaken in order to penetrate the actual barriers for large scale energy production. In the paper are also presented: the actual energy production issues; the key arguments that could be used to sustain R and D for finding new energy sources; the actual limitations in industrial processes knowledge and use. (authors)

Desenvolvimento de sistema de apoio com depósito cerâmico para soldagem e processamento por atrito com pino não consumível

Directory of Open Access Journals (Sweden)

Tiago F. A. Santos

2014-06-01

Full Text Available A mesa suporte das peças a serem unidas normalmente se deforma durante o processo de soldagem por atrito com pino não consumível devido às altas cargas envolvidas. Consequentemente, a obtenção de juntas soldadas com penetração total, bem como a vida útil da amostra e da ferramenta podem ser afetadas, causando paradas não programadas e comprometendo a produtividade do processo e deslocando mão de obra para uma etapa de manutenção não prevista na cadeia do processo de soldagem. Este trabalho apresenta uma mesa de apoio com depósito cerâmico para o processamento e soldagem por atrito com pino não consumível. Para o desenvolvimento da mesa foram testados quatro depósitos cerâmicos, sob uma placa de aço, dos quais o de menor porosidade atingiu melhor desempenho. Essa mesa permitiu a realização de juntas soldadas com penetração completa de aços inoxidáveis duplex; resistir às altas cargas durante a soldagem de aços baixa liga alta resistência e realizar juntas dissimilares aço-alumínio, sem aderência do material mais macio à mesa suporte; bem como outras importantes características como confinar o calor e o metal plastificado, assim como determinar parâmetros de soldagem estáveis.

Peer production & peer support at the Free Technology Academy

NARCIS (Netherlands)

Potters, Hanneke; Berlanga, Adriana; Bijlsma, Lex

2012-01-01

Potters, H., Berlanga, A. J., & Lex, B. (2011). Peer Production & Peer Support at the Free Technology Academy. In G. van de Veer, P. B. Sloep, & M. van Eekelen (Eds.), Proceedings Computer Science Education Research Conference (CSERC '11) (pp. 49-58). April, 7-8, 2011, Heerlen, The Netherlands: ACM.

Study on technology for radioactive waste treatment and management from uranium production

International Nuclear Information System (INIS)

Vu Hung Trieu; Vu Thanh Quang; Nguyen Duc Thanh; Trinh Giang Huong; Tran Van Hoa; Hoang Minh Chau; Ngo Van Tuyen; Nguyen Hoang Lan; Vuong Huu Anh

2007-01-01

There is some solid and liquid radioactive waste created during producing Uranium that needs being treated and managed to keep our environment safe. This radioactive waste contains Uranium (U-238), Thorium (Th-232), Radium (Ra-226) and some heavy metals and mainly is low radioactive waste. Our project has researched and built up appropriate technology for treating and managing the radioactive waste. After researching and experimenting, we have built up four technology processes as follows: Technology for separating Radium from liquid waste; Technology for treating and managing solid waste containing Ra; Technology for separating Thorium from liquid waste after recovering radium; Technology for stabilizing solid waste from Uranium production. (author)

Creation of Micro Products in the future - joining of materials as a key technology

DEFF Research Database (Denmark)

Møller, Per; Hansen, Hans Nørgaard

2003-01-01

jet printers, reading caps for hard disks etc.) as well as medical and biomedical products (pacemakers, analysis equipment, sensors etc.). Furthermore motion sensors for the automotive industry represent an industrial application of micro systems. On the technological side the development has moved...... very fast, primarily driven by the need of the electronics industry to create still smaller chips with still larger capacity. Therefore the manufacturing technologies connected with micro/nano products in silicon are relatively highly developed compared to the technologies used for manufacturing...

The Chemistry and Technology of Furfural Production in Modern Lignocellulose-Feedstock Biorefineries

NARCIS (Netherlands)

Marcotullio, G.

2011-01-01

This dissertation deals with biorefinery technology development, i.e. with the development of sustainable industrial methods aimed at the production of chemicals, fuels, heat and power from lignocellulosic biomass. This work is particularly focused on the production of furfural from

Integrating environmental impact assessment into new product development and processing-technology selection

NARCIS (Netherlands)

Depping, Verena; Grunow, Martin; Middelaar, van Corina; Dumpler, Joseph

2017-01-01

Environmental-impact reduction potential is great early in new product development. To exploit this potential, this study evaluates novel combinations of existent processing technologies. Process engineering is combined with an environmental product assessment along the supply chain. In the dairy

PRODUCTION WELL PERFORMANCE ENHANCEMENT USING SONICATION TECHNOLOGY

Energy Technology Data Exchange (ETDEWEB)

Michael A. Adewumi; M. Thaddeus Ityokumbul; Robert W. Watson; Mario Farias; Glenn Heckman; Johnson Olanrewaju; Eltohami Eltohami; Bruce G. Miller; W. Jack Hughes; Thomas C. Montgomery

2003-12-17

The objective of this project is to develop a sonic well performance enhancement technology that focuses on near wellbore formations. In order to successfully achieve this objective, a three-year project has been defined with each year consisting of four tasks. The first task is the laboratory-scale study whose goal is to determine the underlying principles of the technology. The second task will develop a scale-up mathematical model to serve as the design guide for tool development. The third task is to develop effective transducers that can operate with variable frequency so that the most effective frequencies can be applied in any given situation. The system, assembled as part of the production string, ensures delivery of sufficient sonic energy to penetrate the near-wellbore formation. The last task is the actual field testing of the tool. The first year of the project has been completed.

Organizational Capability Deployment Analysis for Technology Conversion into Processes, Products and Services

Directory of Open Access Journals (Sweden)

Tomoe Daniela Hamanaka Gusberti

2013-12-01

Full Text Available This article discusses Organizational Capabilities as the basic components of business models that emerged under the New Product Development Process and Technological Management. In the context of the new Technology Based Companies Development, it adopts a qualitative research in order to identify, analyze and underpin the organizational capability deployment in a process of technology conversion into product and service. The analysis was carried out considering concepts from literature review, in a technology based enterprise started by an academic spin-off company. The analysis enabled the elicitation of a Business Model and the discussion of their components, and correspondent evolution hypothesis. The paper provides an example of capability deployment accordingly the established theory illustrated by a case study. The study not just enumerate the needed partners, resources, customer channels, it enabled the description of their connection, representing the logic behind the decision made to develop the conceptual model. This detailed representation of the model allows better addressed discussions.

Protective Effects of N-Acetyl Cysteine against Diesel Exhaust Particles-Induced Intracellular ROS Generates Pro-Inflammatory Cytokines to Mediate the Vascular Permeability of Capillary-Like Endothelial Tubes

Science.gov (United States)

Tseng, Chia-Yi; Chang, Jing-Fen; Wang, Jhih-Syuan; Chang, Yu-Jung; Gordon, Marion K.; Chao, Ming-Wei

2015-01-01

Exposure to diesel exhaust particles (DEP) is associated with pulmonary and cardiovascular diseases. Previous studies using in vitro endothelial tubes as a simplified model of capillaries have found that DEP-induced ROS increase vascular permeability with rearrangement or internalization of adherens junctional VE-cadherin away from the plasma membrane. This allows DEPs to penetrate into the cell and capillary lumen. In addition, pro-inflammatory cytokines are up-regulated and mediate vascular permeability in response to DEP. However, the mechanisms through which these DEP-induced pro-inflammatory cytokines increase vascular permeability remain unknown. Hence, we examined the ability of DEP to induce permeability of human umbilical vein endothelial cell tube cells to investigate these mechanisms. Furthermore, supplementation with NAC reduces ROS production following exposure to DEP. HUVEC tube cells contributed to a pro-inflammatory response to DEP-induced intracellular ROS generation. Endothelial oxidative stress induced the release of TNF-α and IL-6 from tube cells, subsequently stimulating the secretion of VEGF-A independent of HO-1. Our data suggests that DEP-induced intracellular ROS and release of the pro-inflammatory cytokines TNF- α and IL-6, which would contribute to VEGF-A secretion and disrupt cell-cell borders and increase vasculature permeability. Addition of NAC suppresses DEP-induced ROS efficiently and reduces subsequent damages by increasing endogenous glutathione. PMID:26148005

Protective Effects of N-Acetyl Cysteine against Diesel Exhaust Particles-Induced Intracellular ROS Generates Pro-Inflammatory Cytokines to Mediate the Vascular Permeability of Capillary-Like Endothelial Tubes.

Directory of Open Access Journals (Sweden)

Chia-Yi Tseng

Full Text Available Exposure to diesel exhaust particles (DEP is associated with pulmonary and cardiovascular diseases. Previous studies using in vitro endothelial tubes as a simplified model of capillaries have found that DEP-induced ROS increase vascular permeability with rearrangement or internalization of adherens junctional VE-cadherin away from the plasma membrane. This allows DEPs to penetrate into the cell and capillary lumen. In addition, pro-inflammatory cytokines are up-regulated and mediate vascular permeability in response to DEP. However, the mechanisms through which these DEP-induced pro-inflammatory cytokines increase vascular permeability remain unknown. Hence, we examined the ability of DEP to induce permeability of human umbilical vein endothelial cell tube cells to investigate these mechanisms. Furthermore, supplementation with NAC reduces ROS production following exposure to DEP. HUVEC tube cells contributed to a pro-inflammatory response to DEP-induced intracellular ROS generation. Endothelial oxidative stress induced the release of TNF-α and IL-6 from tube cells, subsequently stimulating the secretion of VEGF-A independent of HO-1. Our data suggests that DEP-induced intracellular ROS and release of the pro-inflammatory cytokines TNF- α and IL-6, which would contribute to VEGF-A secretion and disrupt cell-cell borders and increase vasculature permeability. Addition of NAC suppresses DEP-induced ROS efficiently and reduces subsequent damages by increasing endogenous glutathione.

INNOVATIVE TECHNOLOGICAL SOLUTIONS IN CREATING FUNCTIONAL PRODUCTS POWER

OpenAIRE

I. V. Sergienko; A. E. Kutsova; S. V. Kutsov

2015-01-01

The article deals with a problem of functional products creation for consumers feeling need in proteins, irreplaceable amino acids, vitamins, mineral substances, food fibers, polynonsaturated fat acids. One of the possible ways to improve human nutrition is using non-traditional cultures for bread making technology containing significant amounts of fibrous substances, easily digestible protein, vitamins, unsaturated fatty acids and minerals. Taking into account the Nutrition Science requireme...

Advanced Decontamination Technologies: High Hydrostatic Pressure on Meat Products

Science.gov (United States)

Garriga, Margarita; Aymerich, Teresa

The increasing demand for “natural” foodstuffs, free from chemical additives, and preservatives has triggered novel approaches in food technology developments. In the last decade, practical use of high-pressure processing (HPP) made this emerging non-thermal technology very attractive from a commercial point of view. Despite the fact that the investment is still high, the resulting value-added products, with an extended and safe shelf-life, will fulfil the wishes of consumers who prefer preservative-free minimally processed foods, retaining sensorial characteristics of freshness. Moreover, unlike thermal treatment, pressure treatment is not time/mass dependant, thus reducing the time of processing.

New elements in production technology and operations

International Nuclear Information System (INIS)

Melberg, O.

1995-01-01

The title of this presentation embraces quite a wide scope, however, focus will be on Mobile Production Systems (MPSs) and in particular on Floating Production, Storage and Offloading Units (FPSOs), for which there is presently a remarkable boost in interest particularly in the North Sea area. Over the last 20 years, pioneered by the Argyll TW 58 in 1975, 11 mobile systems have been/are active in the North Sea, i.e. a growth of one for each second year. In 1994 alone a number of eight mobile production systems were contracted of which seven were FPSOs. This boost is following nine years of successful operation of the Petrojarl 1 and is also clearly linked to the success of the Kerr-McGee's Gryphon A project. The title of this presentation reflects new elements in this business; the upturn in interest for FPSOs introduces new ways of thinking and acting. In this paper, the new elements are divided into the general trends; new commercial elements and new technological elements

The technology of fish-vegetable feed production

Directory of Open Access Journals (Sweden)

Mukatova M. D.

2016-09-01

Full Text Available Perspective direction of the Volga-Caspian basin fisheries is increasing the productivity of aquaculture production which requires the availability of sufficient quantities of feed. The cutting waste of carp and crucian carp, crayfish processing (cephalothorax, wheat bran, soy isolate, freshwater plants – pondweed perfoliate, fish-vegetable ration, produced feeding staffs have been investigated. In researching samples of manufactured pelleted feeds the standard methods adopted in the animal feed industry have been used. The number of nitrogen-free extractives and energy value has been determined by calculation. The composition of fish-vegetable ration has been worked out. Some manufacturing inspection of fish-vegetable feed technology using proofing process has been carried out. The possibility of manufacturing on the basis of crushed fish waste of the company LLC "VES" and dry ingredients of fish-vegetable feed has been determined; the output of feed at water content of not more than 10 % is 43 % of feed mix based on the mass of directed waste equal to 84 %. The pilot batch of dry fish-vegetable feed has been investigated to establish quality indicators. It has been determined that fish-vegetable feed meets the requirements of GOST 10385–2014 "Combined feeding staffs for fishes. General specifications" as for main quality indicators and refers to economic grower for catfish and carp fish weighing more than 50 g. This reveals good palatability of the experimental batch of floating feed by carp fish species and African catfish. Thus, fish-vegetable feed manufacturing technology can be implemented in the production for processing secondary raw materials: waste from butchering fish by grinding, cooking, mixing with selected vegetable fillings which is waste of flour or grain processing industries and freshwater plants mowed annually during the reclamation works on the Volga delta.

The fundamentals of the radiation thermal technology for cement production

International Nuclear Information System (INIS)

Abramson, I.G.; Kapralova, R.M.; Nikiforov, Yu.V.; Egorov, G.B.; Vaisman, A.F.

1995-01-01

The fundamentals of principally new radiation thermal way of cement production are presented. The peculiarities of qualities and structure of clinker obtained by this way are given. The technical economic advantages of the new technology are shown

Technologies for direct production of flexible H2/CO synthesis gas

International Nuclear Information System (INIS)

Song Xueping; Guo Zhancheng

2006-01-01

The use of synthesis gas offers the opportunity to furnish a broad range of environmentally clean fuels and high value chemicals. However, synthesis gas manufacturing systems based on natural gas are capital intensive, and hence, there is great interest in technologies for cost effective synthesis gas production. Direct production of synthesis gas with flexible H 2 /CO ratio, which is in agreement with the stoichiometric ratios required by major synthesis gas based petrochemicals, can decrease the capital investment as well as the operating cost. Although CO 2 reforming and catalytic partial oxidation can directly produce desirable H 2 /CO synthesis gas, they are complicated and continued studies are necessary. In fact, direct production of flexible H 2 /CO synthesis gas can be obtained by optimizing the process schemes based on steam reforming and autothermal reforming as well as partial oxidation. This paper reviews the state of the art of the technologies

Inventory of future power and heat production technologies. Partial report Small-scale technology; Inventering av framtidens el- och vaermeproduktionstekniker. Delrapport Smaaskalig teknik

Energy Technology Data Exchange (ETDEWEB)

Ridell, Bengt (Grontmij AB (Sweden))

2008-12-15

The following techniques for small-scale production have been selected to be studied more carefully, Fuel cells, Photovoltaics, Organic Rankine Cycle (ORC), and Wave power. Of the four selected technologies, fuel cells, solar cells, ORC are appropriate for use in so-called distributed generation, to be used close to a consumer, and possibly also for the production of electricity. Wave power is more like the wind in nature and is probably better suited to be used by power companies for direct input to the transmission grid. None of these technologies are now competitive against buying electricity from the Swedish grid. However, there are opportunities for all to reduce production costs so that they can become competitive alternatives in the future, depending largely on the general development of electricity prices, taxes, delivery reliability, etc. The four different technologies have different development stages and requirements that affect their possibility for a commercial breakthrough. These technologies will probably not all get a breakthrough in Sweden. Small-scale technologies will in the time period up to 2030 not be able to compete with the large-scale technologies that exist in today's power grid. In the longer term the situation may be different. The power system might be reduced in importance if the small scale technologies become cheap, reliable and easy to use. Electricity can then be produced locally, directly related to user needs

Depósitos de escarnitos mineralizados em ferro e cobre do arco magmático de Santa Quitéria, Ceará, Provincia Borborema do nordeste do Brasil

Directory of Open Access Journals (Sweden)

Clovis Vaz Parente

Full Text Available Resumo Depósitos de escarnitos mineralizados em W-Mo da Província Borborema são conhecidos desde os anos 40. Entretanto, até a execução deste trabalho, não se tinha registros desses depósitos mineralizados em Fe-Cu. No Ceará, as primeiras ocorrências e/ou depósitos de escarnitos ricos em ferro e cobre foram identificadas recentemente no Arco Magmático Continental de Santa Quitéria, considerado produto de evolução de vários arcos magmáticos, variando de arco juvenil (870 - 800 Ma a colisão continental (625 - 600 Ma. Os escarnitos estão associados às rochas calcissilicáticas e mármores dolomíticos e/ou calcíticos, recortadas por quartzo monzonitos neoproterozóicos cedo a tardi-colisionais. São encontrados todos os tipos do sistema escarnítico como endoescarnitos, hornfels, escarnóides e exoescarnitos. Os exoescarnitos apresentam duas associações minerais, que refletem protólitos carbonáticos distintos: uma composta por clinopiroxênio-granada (estágio progradante e magnetita-pirrotita-calcopirita-pirita-biotita (estágio retrogradante, característica de protólito calcítico, e outra formada por olivina-espinélio-diopsidio na fase progradante e serpentina na fase retrogradante, representativa de protólito dolomítico. As granadas, em parte zonadas, exibem composição dominada por andradita (82 - 52 mol%, seguida por grossularita (16 - 45mol% e, em proporção menor, piropo (2 - 3 mol%. O piroxênio do protólito calcítico é típico da série diopsídio-hedenbergita, com composição média Diopsídio46Hedenbergita52Johannsenita2. Três tipos de minério magnetítico são encontrados: i magnetito bandado; ii magnetito disseminado; iii magnetito maciço filoneano. Ocorre ainda um minério sulfetado de cobre com e sem magnetita associado, e blocos de gossans. Os dados geológicos e metalogenéticos obtidos indicam que a gênese destes escarnitos está associada à influência dos granitos monzoníticos tardi

Overcoming Production Disruption When Adopting New Technologies: Application of Macroergonomics and Safety Culture

Energy Technology Data Exchange (ETDEWEB)

Naca, Christine L. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Rempel, David M. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Imada, Andy S. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Alexandre, Melanie A. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Janowitz, Ira L. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

2016-11-30

Organizations are constantly responding to new technologies that require an appropriate response to remain competitive. Depending on the nature of the technologic changes, incremental changes may be adequate. However, at some point, the technical demands may be disruptive because the organization is unable to respond adequately. In this case study of a biotechnology production facility, rapidly changing customer and technological demands created a crisis manifested in rising employee injuries and production interruptions. The crisis was ultimately addressed through a comprehensive redesign of human-system relationships. Key ingredients included: a management willing to examine the entire production system, a multidisciplinary team coordinating efforts towards a common goal, engagement of staff at all levels of the organization, and the creation of feedback channels to better guide the actions of supervisors and managers. The methods used in this successful case study, involving a macroergonomics approach, can be applied to any private or public enterprise.

Cross-Border Flows of People, Technology Diffusion and Aggregate Productivity

DEFF Research Database (Denmark)

Dalgaard, Carl-Johan Lars; Andersen, Thomas Barnebeck

A number of empirical studies have investigated the hypothesis that cross-border flows of goods (international trade) and capital (FDI) lead to international technology diffusion. The contribution of the present paper consists in examining an as yet neglected vehicle for technology diffusion: cro......-border flows of people. We find that increasing the intensity of international travel, for the purpose of business and otherwise, by 1% increases the level of aggregate total factor productivity and GDP per worker by roughly 0.2%....

The methodological features of teaching subject «Fundamentals of production technologies»

Directory of Open Access Journals (Sweden)

Olesya Kornus

2017-11-01

Full Text Available In the article are reviews the methodical features teaching of the subject "Fundamentals of production technologies" as an example of training of students in the direction of 6.040104 Geography* and specialty 014 Secondary Education (Geography in the Sumy State A.S. Makarenko Pedagogical University. The subject «Fundamentals of production technologies» was introduced into curriculum bachelor of geography for quality training of geography teachers in pedagogical universities. This subject gives students the knowledge about the technical and economic features of the main industries, main technological schemes of production processes and the impact of industrial enterprises on the environment. The subject «Fundamentals of production technologies» is taught for second year students of natural-geographical faculty of the Sumy State A.S. Makarenko Pedagogical University. The educational process provides lectures, practical classes and self-dependent work. One of the forms of organization of training activities is the excursions to industrial enterprises of Sumy city. The organization of excursions includes preparation, conduct and report about the results of the excursion. For better learn the material excursion, preferably before the start of it to divide a group of students into small teams of 3-6 people. The report documentation includes a plan for characteristic of industrial enterprises, as well as multimedia presentation. The defense of report is passes like competition by voted. The team that wins the most votes gets the highest score. This form of subject study contributes to obtaining of positive educational outcomes and lasting knowledge, reliable formation of professional competencies of students-geographers.

Estudio sedimentológico de un sector del río Guadalquivir en las proximidades de Andujar (provincia de Jaén los depósitos de la terraza + 6m (T4

Directory of Open Access Journals (Sweden)

Saint-Aubin, J.

1991-04-01

Full Text Available The characteristics of the current river channel of the Guadalquivir river and deposits of the terrace T4 ( + 6 m near Andújar are described. The study of morphological parameters evidence that they are balanced; this indicates that morphology and channel pattern are contolled mainly by local causes. Changes in discharge and bedload are responsible for gradual variations of channel patterno In contrast, overflow causes sharp changes. A general displacement of the river course towards the S. and SW. was deduced from careful study of maps, air photographs, etc., corresponding to various dates. T4 ( + 6 m terrace deposits exhibit 2 typical vertical sequences (called 1 and 2 respectively of channel and flood-plain facies. A model of terrace growth is proposed which is domonated by point bar deposits.En este trabajo, se analizan las características del cauce actual del río Guadalquivir, en un sector próximo a Andújar, así como los depósitos correspondientes a la terraza + 6 m (T4. Se estudian los principales parámetros morfológicos, observándose buen equilibrio entre ellos, lo que denota que su morfología y trazado están condicionados, fundamentalmente, por factores locales. Las variaciones paulatinas del cauce se producen por cambios en el caudal o en la carga, mientras que las variaciones bruscas, suelen ser consecuencia de desbordamientos. A partir de la comparación de datos de varias épocas (cartografía, foto-aérea, etc., se establece un desplazamiento general del río hacia el S. o SO. En los depósitos de la terraza + 6 m (T4, se distinguen dos secuencias diferentes (tipo 1 y 2, constituidas por asociación de facies de canal y de llanura de inundación. Se establece un modelo para la construcción de la terraza, en el que predominan los depósitos de acreción lateral, caracterizando barras de meandro.

Centralized vs. Decentralized Wage Formation: The Role of Firms' Production Technology

OpenAIRE

Hirsch, Boris; Merkl, Christian; Müller, Steffen; Schnabel, Claus

2014-01-01

This paper is the first to show theoretically and empirically how firms' production technology affects the choice of their preferred wage formation regime. Our theoretical framework predicts, first, that the larger the total factor productivity of a firm, the more likely it is to opt for centralized wage formation where it can hide behind less productive firms. Second, the larger a firm's scale elasticity, the higher its incentive to choose centralized rather than decentralized wage setting d...

Confectionery products (halva type obtained from sunflower: production technology and quality alterations. A review

Directory of Open Access Journals (Sweden)

Mureşan, V.

2013-01-01

Full Text Available Sunflower "halva" is a popular and widely enjoyed confectionery product specific to the countries of Eastern Europe. Conventional halva has historically been produced from sesame seeds in the Middle East and Northern Africa. However, in the production of halva in Eastern Europe, sesame seeds have been largely replaced by sunflower seeds, due to the high availability of sunflower in this region and the comparable taste of the final product. Due to the importance of the cost of raw materials in the food industry, utilization of sunflower seeds in halva production may be of great interest worldwide because it offers the possibility of significantly lowering production costs. Nevertheless, oil separation and storage techniques must be perfected if sunflower halva is to fulfill its promise of becoming a cost effective alternative to sesame seed halva on a worldwide scale. The aims of this review are firstly, to describe the current state of sunflower halva technology, secondly, to isolate the main problems affecting the quality of the final product, and thirdly, to suggest areas of further research necessary to move sunflower halva production closer to reaching its full potential on the world market.