ABOUT DIGITAL MOCK-UP FOR MECHANICAL PRODUCTS

Directory of Open Access Journals (Sweden)

GHERGHINA George

2015-06-01

The digital mock-up of the product is built at a design stage, and is applicable to the whole life-cycle of the product, including design, manufacture, marketing and aftermarket. The digital mock-up could achieve interference check, motion analysis, simulation of performance and manufacturing, technical training, advertising and maintenance, planning etc. The DMU of mechanical products, as important engineering data in a company, is supposed to be able to support all the activities in the whole life-cycle of the product including design, manufacture, marketing and aftermarket

Cost Model for Digital Curation: Cost of Digital Migration

DEFF Research Database (Denmark)

Kejser, Ulla Bøgvad; Nielsen, Anders Bo; Thirifays, Alex

2009-01-01

The Danish Ministry of Culture is currently funding a project to set up a model for costing preservation of digital materials held by national cultural heritage institutions. The overall objective of the project is to provide a basis for comparing and estimating future financial requirements...... for digital preservation and to increase cost effectiveness of digital preservation activities. In this study we describe an activity based costing methodology for digital preservation based on the OAIS Reference Model. In order to estimate the cost of digital migrations we have identified cost critical...

Exporting Complex Digital Products: Motives and Entry Modes

DEFF Research Database (Denmark)

Rask, Morten

2005-01-01

When the product is digital, it will most often be distributed directly to the customer through the Internet, and therefore the entry modes, considered in this paper, are different flavors of the entry mode called direct export: Virtual export channel are generally understood as the entry mode fo...... for digital product providers. However other types of entry modes like what wee call direct digital export with F2F-sales, direct digital export with F2F-support and virtual sales subsidiary are entry modes that respond to a higher degree of pre- and after-sales complexity....

PRICING STRATEGY FOR DIGITAL PRODUCTS

Directory of Open Access Journals (Sweden)

MARIA MAGDALENA CRIVEANU

2018-02-01

Full Text Available The current society imposes an alert pace on companies that need to adapt to change, become more flexible and adopt new strategies to maintain market share. Digital marketing is a useful tool for promoting products, as customers can access a range of product information at any time and from anywhere. At the same time, another advantage on the part of companies is the lower promotion costs as compared to traditional promotional methods, as well as the establishment of a connection and a communication bridge with each client. The most important component in the process of purchasing a product is inevitably the price. It communicates a series of information about the product and the customer so that the price can be an important element of persuasion in relation to other marketing strategies. Most of the time, the smallest price is the most important factor in making a decision about buying a product, and digital marketing offers the posibility to compare prices. In this sense, digital marketing can provide both an advantage and a disadvantage for traders, as the small price may invalidate other marketing strategies or product features. In this sense, pricing is a challenge for marketing departments because the pricing strategy is deferring from the sterile formula of pricing which meant covering costs and making profit. This paper aims to analyze the extent to which price is an important element in purchasing a product, as well as highlighting a variety of methods and techniques used in pricing. Quantitative research is based on a questionnaire applied to 100 respondents in order to identify the correct pricing strategy. Research results communicate an important message to merchants who have to adjust the price of each buyer individually, so that the buyer profile is particularly important in setting the price.

Digital Production and Students as Learning Designers

DEFF Research Database (Denmark)

Sørensen, Birgitte Holm; Levinsen, Karin

2014-01-01

Today’s digitalization allows users to interact, collaborate, communicate and create user-generated content. The technology is intuitive and easy to use even for young children, and new learning opportunities emerge. Particularly, students’ production as a learning form benefits from digitalization...

Conceptual Development af a 3D Product Configuration Model

DEFF Research Database (Denmark)

Skauge, Jørn

2006-01-01

in the development of IT-systems that support the procedures in companies and in the building industry. In other words, it is a knowledge-based system that helps companies in their daily work. The aim of the project has been to develop and examine conceptual ideas about 3D modelling configurator used in the company......’s production of steel fire sliding doors. The development of the 3D digital model is based on practical rather than theoretical research. The result of the research is a prototype digital 3D model to be presented live.......Paper. This project deals with 3D product configuration of a digital building element which has been developed as a prototype in cooperation between a product manufacturer and a research institution in Denmark. The project falls within the concept of product modelling which is more and more used...

Architectural Decision Management for Digital Transformation of Products and Services

Directory of Open Access Journals (Sweden)

Alfred Zimmermann

2016-04-01

Full Text Available The digitization of our society changes the way we live, work, learn, communicate, and collaborate. The Internet of Things, Enterprise Social Networks, Adaptive Case Management, Mobility systems, Analytics for Big Data, and Cloud services environments are emerging to support smart connected products and services and the digital transformation. Biological metaphors of living and adaptable ecosystems provide the logical foundation for self-optimizing and resilient run-time environments for intelligent business services and service-oriented enterprise architectures. Our aim is to support flexibility and agile transformations for both business domains and related information technology. The present research paper investigates mechanisms for decision analytics in the context of multi-perspective explorations of enterprise services and their digital enterprise architectures by extending original architecture reference models with state of art elements for agile architectural engineering for the digitization and collaborative architectural decision support. The paper’s context focuses on digital transformations of business and IT and integrates fundamental mappings between adaptable digital enterprise architectures and service-oriented information systems. We are putting a spotlight on the example domain – Internet of Things.

Digital Transformation, Business Model Innovation and Efficiency in Content Industries: A Review

Directory of Open Access Journals (Sweden)

Joseph P. Rojers

2018-03-01

Full Text Available Owing to the symbolic, highly digitizable nature of the goods the content industry produces, they are highly amenable to digital transformation with radical consequences for businesses selling information products. Digitization and digital networks can save several costs that are inherent in the brick and mortar value chain in the content industry. This transformation creates newer values at several points in the value chain, leading to the emergence of newer business models that enlarge the existing business pie by attracting new customers or encouraging the existing customers to consume more. However, price dispersion that results from product heterogeneity, convenience-seeking user behaviour, consumer awareness, retailer brand equity and trust, and higher switching costs leads to inefficiency in Internet markets. Thus, the pricing strategies suitable for information products differ from that for physical goods - price discrimination and product bundling being two commonly and successfully used pricing strategies for digitized information products.

Tree-Structured Digital Organisms Model

Science.gov (United States)

Suzuki, Teruhiko; Nobesawa, Shiho; Tahara, Ikuo

Tierra and Avida are well-known models of digital organisms. They describe a life process as a sequence of computation codes. A linear sequence model may not be the only way to describe a digital organism, though it is very simple for a computer-based model. Thus we propose a new digital organism model based on a tree structure, which is rather similar to the generic programming. With our model, a life process is a combination of various functions, as if life in the real world is. This implies that our model can easily describe the hierarchical structure of life, and it can simulate evolutionary computation through mutual interaction of functions. We verified our model by simulations that our model can be regarded as a digital organism model according to its definitions. Our model even succeeded in creating species such as viruses and parasites.

Assessing Digital Student Productions, a Design-Based Research Study on the Development of a Criteria-Based Assessment Tool for Students’ Digital Multimodal Productions

DEFF Research Database (Denmark)

Hoffmeyer, Mikkeline; Jensen, Jesper Juellund; Olsen, Marie Veisegaard

2017-01-01

Digital multimodal production is becoming increasingly important as a 21st century skill and as a learning condition in school (K-12). Moreover, there is a growing attention to the significance of criteria-based assessment for learning. Nevertheless, assessment of students’ digital multimodal...... productions is often vague or lacking. Therefore, the research project aims at developing a tool to support assessment of student’s digital multimodal productions through a design-based research method. This paper presents a proposal for issues to be considered through a prototyping phase, based on interviews...

The Formation of Digital Piracy Management Business Models in the Music Records Industry

Directory of Open Access Journals (Sweden)

Edverdas Vaclovas Bartkus

2015-02-01

Full Text Available Over the past two decades due to the rapid expansion of the Internet and content products (music, movies, books and software digital distribution, the number of users copying and distributing these products without the legal consent of their authors is increasing - a phenomenon known as digital piracy. This poses new challenges to the creative content industry seeking to protect itself against the loss of income and copyright infringement.  This problem is particularly relevant to the recorded music industry, as it has the large scale of digital piracy related to very convenient reproduction and distribution of illegal music records.  The widespread practice of record use in the digital space is not favorable to traditional business models based on the distribution of music in physical format. An increasing variety of digital piracy forms and decreasing technical limitations at the same time create new opportunities to manage digital piracy through the use of new technical, legal or economic decisions. This creates need to discuss the relevance and theoretical aspects of digital piracy management in the recorded music industry, and to analyze and compare most widespread digital piracy management business models of in the recorded music industry.

Cost Model for Digital Preservation: Cost of Digital Migration

Directory of Open Access Journals (Sweden)

Ulla Bøgvad Kejser

2011-03-01

Full Text Available The Danish Ministry of Culture has funded a project to set up a model for costing preservation of digital materials held by national cultural heritage institutions. The overall objective of the project was to increase cost effectiveness of digital preservation activities and to provide a basis for comparing and estimating future cost requirements for digital preservation. In this study we describe an activity-based costing methodology for digital preservation based on the Open Archice Information System (OAIS Reference Model. Within this framework, which we denote the Cost Model for Digital Preservation (CMDP, the focus is on costing the functional entity Preservation Planning from the OAIS and digital migration activities. In order to estimate these costs we have identified cost-critical activities by analysing the functions in the OAIS model and the flows between them. The analysis has been supplemented with findings from the literature, and our own knowledge and experience. The identified cost-critical activities have subsequently been deconstructed into measurable components, cost dependencies have been examined, and the resulting equations expressed in a spreadsheet. Currently the model can calculate the cost of different migration scenarios for a series of preservation formats for text, images, sound, video, geodata, and spreadsheets. In order to verify the model it has been tested on cost data from two different migration projects at the Danish National Archives (DNA. The study found that the OAIS model provides a sound overall framework for the cost breakdown, but that some functions need additional detailing in order to cost activities accurately. Running the two sets of empirical data showed among other things that the model underestimates the cost of manpower-intensive migration projects, while it reinstates an often underestimated cost, which is the cost of developing migration software. The model has proven useful for estimating the

Digital cinema: an alternative model for post-apartheid cinematic production and consumption?

Directory of Open Access Journals (Sweden)

Astrid Treffry-Goatley

2011-10-01

Full Text Available http://dx.doi.org/10.5007/2175-8026.2011n61p315 Patterns of cinematic production and consumption are often symptomatic of wider politico-economic and socio-cultural forces. This is the case in South Africa, where this site of cultural production, like the society as a whole, is marked by severe racial stratification and division. One finds, for example, that as a direct result of apartheid inequality, the majority of the population has been alienated from the mechanisms of cinematic production and consumption. This fragmentation remains one of the greatest challenges to the sustainability and racial transformation of the post-apartheid film industry. In this article I present a critical discussion on the rise of the low-budget, digital film in South Africa. With careful reference to prevailing politico-economic conditions and available state-support measures I analyse the potential of digital technology to revolutionise cinematic production and consumption practices. In analysis, it was found that while cinema has indeed become somewhat more accessible, the production, distribution and exhibition of motion pictures in South Africa remain monopolised, exclusive and inaccessible to the majority. Moreover, it is questionable whether the digitised consumption mechanisms in place penetrate a wide enough market to sustain the movement. Therefore, although this is indeed an exciting movement in the industry, it should not be viewed as an outright replacement of existing technology nor a means for independent filmmakers to make it alone. On the contrary, it is most likely to run parallel to existing entertainment mechanisms and state support will still be required to encourage diversity and encourage sustainability.

Extend Course for Product Designer in Digital Mobile Era

Science.gov (United States)

CHAO, Fang-Lin; LIU, Tzu-Heng; HUANG, Xian-Chun

2017-12-01

Product design refers to a system of processes from confirming a product’s specifications to product’s structure. Form, technology, and needs must be considered simultaneously to ensure qualities. In recent years, with the advancement of smartphone technology, many products are connected with apps. Designers cannot exclude themselves from this new wave of the trend. In this article, household hydroponic products design is used as an example, to show the close relationship between digital mobile technology and product design in the contemporary world. Regularly measure the amount of liquid to be added is difficult for a consumer who has no professional experience. To facilitate the introduction of small-scale aquaculture systems into the home, we proposed sensor hardware combined with App software, measured EC and pH value and transmitted to the phone. The app can calculate and display the amount of added and control the amount of inserted through a Bluetooth connection. The physical design needs to take into account the connection between the electronic parts and the circuit board, and interface operation. Thus, not only the model of the product but also the user interface has to be integrated to show the product's quality completely. Besides, authors made reflection upon the necessity for adjustments for interdisciplinary courses under the changing digital mobile era. Also, under the current curriculum structure, possible teaching approach is expressed for extending student’s feasibility.

3D Digital Modelling

DEFF Research Database (Denmark)

Hundebøl, Jesper

wave of new building information modelling tools demands further investigation, not least because of industry representatives' somewhat coarse parlance: Now the word is spreading -3D digital modelling is nothing less than a revolution, a shift of paradigm, a new alphabet... Research qeustions. Based...... on empirical probes (interviews, observations, written inscriptions) within the Danish construction industry this paper explores the organizational and managerial dynamics of 3D Digital Modelling. The paper intends to - Illustrate how the network of (non-)human actors engaged in the promotion (and arrest) of 3...... important to appreciate the analysis. Before turning to the presentation of preliminary findings and a discussion of 3D digital modelling, it begins, however, with an outline of industry specific ICT strategic issues. Paper type. Multi-site field study...

International Digital Elevation Model Service (IDEMS): A Revived IAG Service

Science.gov (United States)

Kelly, K. M.; Hirt, C., , Dr; Kuhn, M.; Barzaghi, R.

2017-12-01

A newly developed International Digital Elevation Model Service (IDEMS) is now available under the umbrella of the International Gravity Field Service of the International Association of Geodesy. Hosted and operated by Environmental Systems Research Institute (Esri) (http://www.esri.com/), the new IDEMS website is available at: https://idems.maps.arcgis.com/home/index.html. IDEMS provides a focus for distribution of data and information about various digital elevation models, including spherical-harmonic models of Earth's global topography and lunar and planetary DEM. Related datasets, such as representation of inland water within DEMs, and relevant software which are available in the public domain are also provided. Currently, IDEMS serves as repository of links to providers of global terrain and bathymetry, terrain related Earth models and datasets such as digital elevation data services managed and maintained by Esri (Terrain and TopoBathy), Bedmap2-Ice thickness and subglacial topographic model of Antarctica and Ice, Cloud, and Land Elevation ICESat/GLAS Data, as well as planetary terrain data provided by PDS Geosciences Node at Washington University, St. Louis. These services provide online access to a collection of multi-resolution and multi-source elevation and bathymetry data, including metadata and source information. In addition to IDEMS current holdings of terrestrial and planetary DEMs, some topography related products IDEMS may include in future are: dynamic ocean topography, 3D crustal density models, Earth's dynamic topography, etc. IDEMS may also consider terrain related products such as quality assessments, global terrain corrections, global height anomaly-to-geoid height corrections and other geodesy-relevant studies and products. IDEMS encourages contributions to the site from the geodetic community in any of the product types listed above. Please contact the authors if you would like to contribute or recommend content you think appropriate for

PRODUCT STRUCTURE DIGITAL MODEL

Directory of Open Access Journals (Sweden)

V.M. Sineglazov

2005-02-01

Full Text Available  Research results of representation of product structure made by means of CADDS5 computer-aided design (CAD system, Product Data Management Optegra (PDM system and Product Life Cycle Management Wind-chill system (PLM, are examined in this work. Analysis of structure component development and its storage in various systems is carried out. Algorithms of structure transformation required for correct representation of the structure are considered. Management analysis of electronic mockup presentation of the product structure is carried out for Windchill system.

Printed products for digital cameras and mobile devices

Science.gov (United States)

Fageth, Reiner; Schmidt-Sacht, Wulf

2005-01-01

Digital photography is no longer simply a successor to film. The digital market is now driven by additional devices such as mobile phones with camera and video functions (camphones) as well as innovative products derived from digital files. A large number of consumers do not print their images and non-printing has become the major enemy of wholesale printers, home printing suppliers and retailers. This paper addresses the challenge facing our industry, namely how to encourage the consumer to print images easily and conveniently from all types of digital media.

Modeling the Dutch subsurface: From paper product towards dissemination of a 3D-digital model

NARCIS (Netherlands)

Dulk, M. den; Doornenbal, J.C.; Veen, J.H. ten

2015-01-01

The Geological Survey of the Netherlands carried out several major mapping projects to construct a consistent, regional-scale petroleum geological framework for the deep subsurface of the Netherlands, both on- and offshore. In the last decade the modeling approach has developed into a fully digital

Systematic Digital Forensic Investigation Model

OpenAIRE

Systematic Digital Forensic Investigation Model

2011-01-01

Law practitioners are in an uninterrupted battle with criminals in the application of digital/computertechnologies, and require the development of a proper methodology to systematically searchdigital devices for significant evidence. Computer fraud and digital crimes are growing day by dayand unfortunately less than two percent of the reported cases result in confidence. This paperexplores the development of the digital forensics process model, compares digital forensicmethodologies, and fina...

Digital Product Acquisition In The Context Of Piracy

DEFF Research Database (Denmark)

Veitch, Rob; Constantiou, Ioanna

2011-01-01

Ten years after the fall of Napster, digital piracy remains an issue for e-commerce firms. While scholars treat digital piracy as a behaviour that needs to be prevented or punished, the user’s decision about how to acquire a digital product involves more than the piracy option, yet the decision b...... is conducted for film and music using data collected students in at two Danish universities. The paper concludes with an outline for future research....

Comprehension of digital media

International Nuclear Information System (INIS)

Kim, Ju Hwan

2008-11-01

This book is divided four parts. The first part describes media and mark on sign and media, what is the sign?, interpretation of sign and semiotics. The second part is for production sign theory and origin of digital revolution such as the problem of origin of digital revolution, homogeneity of producing goods and sign : triple triangle model for production sign theory, triple triangle model for producing goods, triple triangle model of producing sign and triple triangle model of art works. The third parts deals with development of the media and meaning of digital revolution with four changes : invention of letter, appearance of printed media and establishment modernity, appearance electronic media and mess media and appearance of digital media. The last part mentions ontology of world wide web.

Comprehension of digital media

Energy Technology Data Exchange (ETDEWEB)

Kim, Ju Hwan

2008-11-15

This book is divided four parts. The first part describes media and mark on sign and media, what is the sign?, interpretation of sign and semiotics. The second part is for production sign theory and origin of digital revolution such as the problem of origin of digital revolution, homogeneity of producing goods and sign : triple triangle model for production sign theory, triple triangle model for producing goods, triple triangle model of producing sign and triple triangle model of art works. The third parts deals with development of the media and meaning of digital revolution with four changes : invention of letter, appearance of printed media and establishment modernity, appearance electronic media and mess media and appearance of digital media. The last part mentions ontology of world wide web.

Evaluation of CBCT digital models and traditional models using the Little's Index.

Science.gov (United States)

Kau, Chung How; Littlefield, Jay; Rainy, Neal; Nguyen, Jennifer T; Creed, Ben

2010-05-01

To determine if measurements obtained from digital models from cone beam computed tomography (CBCT) images were comparable to the traditional method of digital study models by impressions. Digital models of 30 subjects were used. InVivoDental (Anatomage, San Jose, Calif) software was used to analyze CBCT scans taken by a Galileos cone beam scanner (Sirona, Charlotte, NC) with a field of view of 15 x 15 x 15 cm(3) and a voxel resolution of 0.125 mm. OrthoCAD (Cadent, Fairview, NJ) software was used to analyze impression scans of patients at different stages of orthodontic treatment. Impressions were taken using alginate and were mailed to OrthoCAD for digital conversion. The scans were then electronically returned in digital format for analysis. The maxillary mean scores for the Little's Index were 9.65 mm for digital models and 8.87 mm for InVivoDental models, respectively. The mandibular mean scores for the Little's Index were 6.41 mm for digital models and 6.27 mm for InVivoDental models, respectively. The mean overjet measurements were 3.32 mm for digital models and 3.52 mm for InVivoDental models, respectively. The overbite measurements were 2.29 mm for digital models and 2.26 mm for InVivoDental models, respectively. The paired t-test showed no statistical significance between the differences in all measurements. CBCT digital models are as accurate as OrthoCAD digital models in making linear measurements for overjet, overbite, and crowding measurements.

Empowering production workers with digitally facilitated knowledge processes--a conceptual framework

DEFF Research Database (Denmark)

Hannola, Lea; Richter, Alexander; Richter, Shahper

2018-01-01

proposes a conceptual framework for empowering workers in industrial production environments with digitally facilitated knowledge management processes. The framework explores four concrete facets of digital advancements that apply to a wide range of knowledge processes and production strategies...

Protected interoperability of telecommunications and digital products

Science.gov (United States)

Hampel, Viktor E.; Cartier, Gene N.; Craft, James P.

1994-11-01

New federal standards for the protection of sensitive data now make it possible to ensure the authenticity, integrity and confidentiality of digital products, and non-repudiation of digital telecommunications. Under review and comment since 1991, the new Federal standards were confirmed this year and provide standard means for the protection of voice and data communications from accidental and wilful abuse. The standards are initially tailored to protect only `sensitive-but-unclassified' (SBU) data in compliance with the Computer Security Act of 1987. These data represent the majority of transactions in electronic commerce, including sensitive procurement information, trade secrets, financial data, product definitions, and company-proprietary information classified as `intellectual property.' Harmonization of the new standards with international requirements is in progress. In the United States, the confirmation of the basic standards marks the beginning of a long-range program to assure discretionary and mandatory access controls to digital resources. Upwards compatibility into the classified domain with multi-level security is a core requirement of the National Information Infrastructure. In this report we review the powerful capabilities of standard Public-Key-Cryptology, the availability of commercial and Federal products for data protection, and make recommendations for their cost-effective use to assure reliable telecommunications and process controls.

Digital HCAL Electronics: Status of Production

Energy Technology Data Exchange (ETDEWEB)

Drake, Gary; Repond, Jose, E-mail: drake@hep.anl.gov [Argonne National Laboratory (United States)

2011-04-01

This is a status report of the production of the readout electronics for the Digital Hadron Calorimeter (DHCAL) prototype. The prototype will be equipped with Resistive Plate Chambers (RPCs), read out with 1 x 1 cm{sup 2} pads. The readout of each channel is simplified to provide a yes or no (digital readout) within a time bin of 100 ns. Each detector layer with an area of 96 x 96 cm{sup 2} contains close to 10,000 readout channels. The total channel count for the entire prototype calorimeter with 38 active layers is approximately 350,000.

Embedding X.509 Digital Certificates in Three-Dimensional Models for Authentication, Authorization, and Traceability of Product Data.

Science.gov (United States)

Hedberg, Thomas D; Krima, Sylvere; Camelio, Jaime A

2017-03-01

Exchange and reuse of three-dimensional (3D)-product models are hampered by the absence of trust in product-lifecycle-data quality. The root cause of the missing trust is years of "silo" functions (e.g., engineering, manufacturing, quality assurance) using independent and disconnected processes. Those disconnected processes result in data exchanges that do not contain all of the required information for each downstream lifecycle process, which inhibits the reuse of product data and results in duplicate data. The X.509 standard, maintained by the Telecommunication Standardization Sector of the International Telecommunication Union (ITU-T), was first issued in 1988. Although originally intended as the authentication framework for the X.500 series for electronic directory services, the X.509 framework is used in a wide range of implementations outside the originally intended paradigm. These implementations range from encrypting websites to software-code signing, yet X.509 certificate use has not widely penetrated engineering and product realms. Our approach is not trying to provide security mechanisms, but equally as important, our method aims to provide insight into what is happening with product data to support trusting the data. This paper provides a review of the use of X.509 certificates and proposes a solution for embedding X.509 digital certificates in 3D models for authentication, authorization, and traceability of product data. This paper also describes an application within the Aerospace domain. Finally, the paper draws conclusions and provides recommendations for further research into using X.509 certificates in product lifecycle management (PLM) workflows to enable a product lifecycle of trust.

Free Software Beyond Radical Politics: Negotiations of Creative and Craft Autonomy in Digital Visual Media Production

Directory of Open Access Journals (Sweden)

Julia Velkova

2016-08-01

Full Text Available Free software development and the technological practices of hackers have been broadly recognised as fundamental for the formation of political cultures that foster democracy in the digital mediascape. This article explores the role of free software in the practices of digital artists, animators and technicians who work in various roles for the contemporary digital visual media industries. Rather than discussing it as a model of organising work, the study conceives free software as a production tool and shows how it becomes a locus of politics about finding material security in flexible capitalism. This politics is ultimately contradictory in that it extends creative and craft autonomy of digital artists but does not mobilise a critical project. Instead, it nurtures further precarious labour. Empirically, the article draws on ethnographically collected material from the media practices of digital artists and programmers who engage with two popular free software production tools, Blender and Synfig.

Digital Co-production in Archaeology. An editorial

Directory of Open Access Journals (Sweden)

Chiara Bonacchi

2017-12-01

Full Text Available This special issue focuses on digitally-enabled co-production in archaeology, by bringing together papers that were presented at the session Communication as Collaboration: Digital Methods, Experiences and Values, organised at the 21st Annual Meeting of the European Association of Archaeologists (University of Glasgow, 2015. The session was part of the Communicating Archaeology thematic cluster, which was partly inspired by the first published volume dedicated specifically to the topic of digital public engagement in archaeology (Bonacchi 2012. In that session and in this collection, we have been exploring communication as the collaborative construction of materials and interpretations rather than the dissemination of content at given stages of the archaeological research process (Bonacchi and Moshenska 2015.

USGS QA Plan: Certification of digital airborne mapping products

Science.gov (United States)

Christopherson, J.

2007-01-01

To facilitate acceptance of new digital technologies in aerial imaging and mapping, the US Geological Survey (USGS) and its partners have launched a Quality Assurance (QA) Plan for Digital Aerial Imagery. This should provide a foundation for the quality of digital aerial imagery and products. It introduces broader considerations regarding processes employed by aerial flyers in collecting, processing and delivering data, and provides training and information for US producers and users alike.

Comparing Digital Flood Insurance Rate Maps (DFIRMs) to Interferometric Synthetic Aperture Radar (IFSAR) Products

National Research Council Canada - National Science Library

Damron, James J

2000-01-01

.... IFSAR Digital Elevation Model (DEM) and Ortho-Rectified Image (ORI), referred to as a magnitude image, were used to compare the data accuracy and content of the DFIRMs. This study will provide timely information needed for future DFIRM production.

Math for the digital factory

CERN Document Server

Hömberg, Dietmar; Landry, Chantal

2017-01-01

This volume provides a unique collection of mathematical tools and industrial case studies in digital manufacturing. It addresses various topics, ranging from models of single production technologies, production lines, logistics and workflows to models and optimization strategies for energy consumption in production. The digital factory represents a network of digital models and simulation and 3D visualization methods for the holistic planning, realization, control and ongoing improvement of all factory processes related to a specific product. In the past ten years, all industrialized countries have launched initiatives to realize this vision, sometimes also referred to as Industry 4.0 (in Europe) or Smart Manufacturing (in the United States). Its main goals are • reconfigurable, adaptive and evolving factories capable of small-scale production • high-performance production, combining flexibility, productivity, precision and zero defects • energy and resource efficiency in manufacturing None of these...

Global gridded physical profile data from the U.S. Navy's Generalized Digital Environmental Model (GDEM) product database (NODC Accession 9600094)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — The Generalized Digital Environmental Model (GDEM) is a four-dimensional (4-D) steady-state digital model of ocean temperature and salinity. The model consists of...

An automated, open-source pipeline for mass production of digital elevation models (DEMs) from very-high-resolution commercial stereo satellite imagery

Science.gov (United States)

Shean, David E.; Alexandrov, Oleg; Moratto, Zachary M.; Smith, Benjamin E.; Joughin, Ian R.; Porter, Claire; Morin, Paul

2016-06-01

We adapted the automated, open source NASA Ames Stereo Pipeline (ASP) to generate digital elevation models (DEMs) and orthoimages from very-high-resolution (VHR) commercial imagery of the Earth. These modifications include support for rigorous and rational polynomial coefficient (RPC) sensor models, sensor geometry correction, bundle adjustment, point cloud co-registration, and significant improvements to the ASP code base. We outline a processing workflow for ˜0.5 m ground sample distance (GSD) DigitalGlobe WorldView-1 and WorldView-2 along-track stereo image data, with an overview of ASP capabilities, an evaluation of ASP correlator options, benchmark test results, and two case studies of DEM accuracy. Output DEM products are posted at ˜2 m with direct geolocation accuracy of process individual stereo pairs on a local workstation, the methods presented here were developed for large-scale batch processing in a high-performance computing environment. We are leveraging these resources to produce dense time series and regional mosaics for the Earth's polar regions.

Digital Model of Railway Electric Traction Lines

Science.gov (United States)

Garg, Rachana; Mahajan, Priya; Kumar, Parmod

2017-08-01

The characteristic impedance and propagation constant define the behavior of signal propagation over the transmission lines. The digital model for railway traction lines which includes railway tracks is developed, using curve fitting technique in MATLAB. The sensitivity of this model has been computed with respect to frequency. The digital sensitivity values are compared with the values of analog sensitivity. The developed model is useful for digital protection, integrated operation, control and planning of the system.

Towards Trustable Digital Evidence with PKIDEV: PKI Based Digital Evidence Verification Model

Science.gov (United States)

Uzunay, Yusuf; Incebacak, Davut; Bicakci, Kemal

How to Capture and Preserve Digital Evidence Securely? For the investigation and prosecution of criminal activities that involve computers, digital evidence collected in the crime scene has a vital importance. On one side, it is a very challenging task for forensics professionals to collect them without any loss or damage. On the other, there is the second problem of providing the integrity and authenticity in order to achieve legal acceptance in a court of law. By conceiving digital evidence simply as one instance of digital data, it is evident that modern cryptography offers elegant solutions for this second problem. However, to our knowledge, there is not any previous work proposing a systematic model having a holistic view to address all the related security problems in this particular case of digital evidence verification. In this paper, we present PKIDEV (Public Key Infrastructure based Digital Evidence Verification model) as an integrated solution to provide security for the process of capturing and preserving digital evidence. PKIDEV employs, inter alia, cryptographic techniques like digital signatures and secure time-stamping as well as latest technologies such as GPS and EDGE. In our study, we also identify the problems public-key cryptography brings when it is applied to the verification of digital evidence.

Digital Core Modelling for Clastic Oil and Gas Reservoir

Science.gov (United States)

Belozerov, I.; Berezovsky, V.; Gubaydullin, M.; Yur’ev, A.

2018-05-01

"Digital core" is a multi-purpose tool for solving a variety of tasks in the field of geological exploration and production of hydrocarbons at various stages, designed to improve the accuracy of geological study of subsurface resources, the efficiency of reproduction and use of mineral resources, as well as applying the results obtained in production practice. The actuality of the development of the "Digital core" software is that even a partial replacement of natural laboratory experiments with mathematical modelling can be used in the operative calculation of reserves in exploratory drilling, as well as in the absence of core material from wells. Or impossibility of its research by existing laboratory methods (weakly cemented, loose, etc. rocks). 3D-reconstruction of the core microstructure can be considered as a cheap and least time-consuming method for obtaining petrophysical information about the main filtration-capacitive properties and fluid motion in reservoir rocks.

Modeling digital switching circuits with linear algebra

CERN Document Server

Thornton, Mitchell A

2014-01-01

Modeling Digital Switching Circuits with Linear Algebra describes an approach for modeling digital information and circuitry that is an alternative to Boolean algebra. While the Boolean algebraic model has been wildly successful and is responsible for many advances in modern information technology, the approach described in this book offers new insight and different ways of solving problems. Modeling the bit as a vector instead of a scalar value in the set {0, 1} allows digital circuits to be characterized with transfer functions in the form of a linear transformation matrix. The use of transf

New approaches to digital transformation of petrochemical production

Science.gov (United States)

Andieva, E. Y.; Kapelyuhovskaya, A. A.

2017-08-01

The newest concepts of the reference architecture of digital industrial transformation are considered, the problems of their application for the enterprises having in their life cycle oil products processing and marketing are revealed. The concept of the reference architecture, providing a systematic representation of the fundamental changes in the approaches to production management based on the automation of production process control is proposed.

Development strategy and process models for phased automation of design and digital manufacturing electronics

Science.gov (United States)

Korshunov, G. I.; Petrushevskaya, A. A.; Lipatnikov, V. A.; Smirnova, M. S.

2018-03-01

The strategy of quality of electronics insurance is represented as most important. To provide quality, the processes sequence is considered and modeled by Markov chain. The improvement is distinguished by simple database means of design for manufacturing for future step-by-step development. Phased automation of design and digital manufacturing electronics is supposed. The MatLab modelling results showed effectiveness increase. New tools and software should be more effective. The primary digital model is proposed to represent product in the processes sequence from several processes till the whole life circle.

Registering, indexing and digitally preserving RDBCI: Production indicators of 2003 to 2016

Directory of Open Access Journals (Sweden)

Gildenir Carolino Santos

2016-09-01

Full Text Available The question of explosion and digital preservation issues are totally in vogue today. In this context, the aim of this study is to analyze bibliographically the typeset production and published the “RDBCI: Revista Digital de Biblioteconomia e Ciência da Informação” in these its thirteen years of existence, in order to disclose the analysis of published scientific production, featuring the themes of articles and the most representative authors, contributing to the community area in question as well as enhance the importance of the magazine to the field of Library and Information Science. The journal is entirely digital, born and incubated on free platform OJS/SEER, provided by IBICT since 2004. Moreover, in these years of experience the magazine is effective information vehicle of the area and its existence confirms that electronic publications born in this format, survive in the digital world. From 2013, the RDBCI began to integrate Cariniana Network (IBICT, digitally preserving your entire collection through the LOCKSS software, and other institutions aggregated to the network, and in March 2016 began to integrate The Keepers Registry, making If the first Brazilian publication to be part of this international digital preservation network. The methodology adopted was through a survey of articles published from 2003 to 2016, collecting data such as access numbers, downloads, and other statistical and qualitative indicators, making use of tools such as Google Analytics, Altmetrics, Index h and alternative metrics as well as databases, directories, portals and indexes where the journal is indexed. We believe the result of this work serves as a qualitative analysis model for other periodicals and promotes growth of more national and international scientific publications with open access.

Digital twins of human robot collaboration in a production setting

DEFF Research Database (Denmark)

Malik, Ali Ahmad; Bilberg, Arne

2018-01-01

This paper aims to present a digital twin framework to support the design, build and control of human-machine cooperation. In this study, computer simulations are used to develop a digital counterpart of a human-robot collaborative work environment for assembly work. The digital counterpart remains...... updated during the life cycle of the production system by continuously mirroring the physical system for quick and safe embed for continuous improvements. The case of a manufacturing company with human-robot work teams is presented for developing and validating the digital twin framework....

From Digital Disruption to Business Model Scalability

DEFF Research Database (Denmark)

Nielsen, Christian; Lund, Morten; Thomsen, Peter Poulsen

2017-01-01

This article discusses the terms disruption, digital disruption, business models and business model scalability. It illustrates how managers should be using these terms for the benefit of their business by developing business models capable of achieving exponentially increasing returns to scale...... will seldom lead to business model scalability capable of competing with digital disruption(s)....... as a response to digital disruption. A series of case studies illustrate that besides frequent existing messages in the business literature relating to the importance of creating agile businesses, both in growing and declining economies, as well as hard to copy value propositions or value propositions that take...

Digital Maturity of the Firm's Business Model

DEFF Research Database (Denmark)

Groskovs, Sergejs; Vemula, Sreekanth

We propose a digital maturity assessment model as an instrument for researchers and a strategic tool for managers. Existing literature lacks a conceptually clear way to measure the construct of digital maturity at the level of the firms business model. Our proposed instrument thus opens avenues...... for research into questions related to antecedents, process, and performance outcomes of the digitalization of business activities. The assessment follows the logic of first decomposing the business model into the underlying value creation activities and then evaluating the levels of automation...

Complementors as Connectors: Open Innovation in Digital Product Platforms

NARCIS (Netherlands)

Hilbolling, Susan; Berends, Hans; Deken, F.; Tuertscher, Philipp

2018-01-01

Through open, standardized interfaces, autonomous third parties can develop complementary products and services for digital product platforms, but, at the same time, these third parties also establish connections that span multiple platforms - beyond the control of the platform owner. This paper

Digital Elevation Model (DEM) 24K

Data.gov (United States)

Kansas Data Access and Support Center — Digital Elevation Model (DEM) is the terminology adopted by the USGS to describe terrain elevation data sets in a digital raster form. The standard DEM consists of a...

Agreement in the determination of preformed wire shape templates on plaster models and customized digital arch form diagrams on digital models.

Science.gov (United States)

Camardella, Leonardo Tavares; Sá, Maiara da Silva Bezerra; Guimarães, Luciana Campos; Vilella, Beatriz de Souza; Vilella, Oswaldo de Vasconcellos

2018-03-01

The aim of this study was to verify the accuracy of preformed wire shape templates on plaster models and those of customized digital arch form diagrams on digital models. Twenty pairs of dental plaster models were randomly selected from the archives of the Department of Orthodontics of Federal Fluminense University, Niterói, Rio de Janeiro, Brazil. All plaster model samples were scanned in a plaster model scanner to create the respective digital models. Three examiners defined the arch form on the mandibular arch of these models by selecting the ideal preformed wire shape template on each plaster model or by making a customized digital arch form on the digital models using a digital arch form customization tool. These 2 arch forms were superimposed by the best-fit method. The greatest differences in the 6 regions on the superimposed arches were evaluated. Each examiner presented a descriptive analysis with the means, standard deviation, and minimum and maximum intervals of the differences on the superimpositions. Intraclass correlation coefficient and paired t tests were used to evaluate the accuracy of the superimpositions. Among the 6 regions analyzed in the superimpositions, the largest differences in the anterior and premolar regions were considered clinically insignificant, whereas the largest differences in the right molar region, especially the second molar area, were considered clinically significant by all 3 examiners. The intraclass correlation coefficients showed a weak correlation in the premolar region and moderate correlations in the anterior and molar regions. The paired t test showed statistically significant differences in the left anterior and premolar regions. The superimpositions between the arch forms on plaster and digital models were considered accurate, and the differences were not clinically significant, with the exception of the second molar area. Despite the favorable results, the requirement of correcting some software problems may

Digital Maturity of the Firm's Business Model

DEFF Research Database (Denmark)

Groskovs, Sergejs; Vemula, Sreekanth

We propose a digital maturity assessment model as an instrument for researchers and a strategic tool for managers. Existing literature lacks a conceptually clear way to measure the construct of digital maturity at the level of the firms business model. Our proposed instrument thus opens avenues f...

Digital Literacy and Metaphorical Models

Directory of Open Access Journals (Sweden)

Carolina Girón García

2014-09-01

Full Text Available It is an acknowledged fact that the appearance of new genres in cyberspace has shifted the main focus of instruction strategies nowadays. Learners of any field are challenged by the acquisition of a new type of literacy, digital literacy –how to read and write, or how to interact, in and through the Internet. In this line, websites often show expressions like "home", "visit", "down-load", "link", etc. which are used in a new sense that did not exist before the digital era. Such expressions constitute the manifestation of mental models that have been transferred from traditional conceptual domains onto the new knowledge domain of the Internet. These conceptual metaphors are some of the cognitive models that help in the conceptualization of new cybergenres. This paper points at describing how these cognitive models build our notion of diverse cybergenres in English – e.g. the weblog, the social network, the cybertask. Our aim here consists in detecting these metaphorical models as well as describing and classifying their conceptual mappings between domains. With that purpose, some digital materials are analyzed, so as to test the hypothesis that such mappings and models guide the user's representation of the genre, as a coherent structure.

Production of high-resolution digital terrain models in mountain regions to support risk assessment

Directory of Open Access Journals (Sweden)

Gianfranco Forlani

2015-07-01

Full Text Available Demand for high-accuracy digital terrain models (DTMs in the Alpine region has been steadily increasing in recent years in valleys as well as high mountains. In the former, the determination of the geo-mechanical parameters of rock masses is the main objective; global warming, which causes the retreat of glaciers and the reduction of permafrost, is the main drive of the latter. The consequence is the instability of rock masses in high mountains: new cost-effective monitoring techniques are required to deal with the peculiar characteristics of such environment, delivering results at short notice. After discussing the design and execution of photogrammetric surveys in such areas, with particular reference to block orientation and block control, the paper describes the production of DTMs of rock faces and glacier fronts with light instrumentation and data acquisition techniques, allowing highly automated data processing. To this aim, the PhotoGPS technique and structure from motion algorithms are used to speed up the orientation process, while dense matching area-based correlation techniques are used to generate the DTMs.

Nuclear reactor and production systems with digital controls

International Nuclear Information System (INIS)

Luger, P.P.

1976-01-01

Several digital sensing devices are described for use in automated production systems. The first described is for use in the automatic operation of a reactor. This device employs a binant electrometer using a quartz fiber mounted at one end but free to vibrate at the other in an AC field. The fiber oscillates if a charge is placed upon it. An optical slit replaces the ordinary eyepiece reticule scale. With the quartz fiber adjusted so its image is in focus at the optical slit, photoelectric signals are obtained at null charge on the fiber. The quartz fiber is repeatedly charged and allowed to discharge by collecting ions from a source under measurement. Each photoelectric signal causes a digital time reading to be taken. The time readings are used to evaluate the current due to the collected charge. The photoelectric signals, by feedback, also operate the electrometer for continuous or intermittent-continuous operation. Basically, the system is a current digitizer. Application is made to reactor monitoring and control as well as to other types of production systems. Finally, other types of sensing devices are also described and their use in automated controlled processes is shown. 3 claims, 19 figures

Digital System Categorization Methodology to Support Integration of Digital Instrumentation and Control Models into PRAs

International Nuclear Information System (INIS)

Arndt, Steven A.

2011-01-01

It has been suggested that by categorizing the various digital systems used in safety critical applications in nuclear power plants, it would be possible to determine which systems should be modeled in the analysis of the larger plant wide PRA, at what level of detail the digital system should be modeled and using which methods. The research reported in this paper develops a categorization method using system attributes to permit a modeler to more effectively model the systems that will likely have the most critical contributions to the overall plant safety and to more effectively model system interactions for those digital systems where the interactions are most important to the overall accuracy and completeness of the plant PRA. The proposed methodology will categorize digital systems based on certain attributes of the systems themselves and how they will be used in the specific application. This will help determine what digital systems need to be modeled and at what level of detail, and can be used to guide PRA analysis and regulatory reviews. The three-attribute categorization strategy that was proposed by Arndt is used as the basis for the categorization methodology developed here. The first attribute, digital system complexity, is based on Type Il interactions defined by Aldemir and an overall digital system size and complexity index. The size and complexity index used are previously defined software complexity metrics. Potential sub-attributes of digital system complexity include, design complexity, software complexity, hardware complexity, system function complexity and testability. The second attribute, digital system interactions/inter-conductivity, is a combination of Rushby's coupling and Ademir's Type I interactions. Digital systems that are loosely coupled and/or have very few Type I interaction would not interact dynamically with the overall system and would have a low interactions/inter-conductivity score. Potential sub-attributes of digital system

Digital System Categorization Methodology to Support Integration of Digital Instrumentation and Control Models into PRAs

Energy Technology Data Exchange (ETDEWEB)

Arndt, Steven A. [U.S. Nuclear Regulatory Commission, Washington D.C. (United States)

2011-08-15

It has been suggested that by categorizing the various digital systems used in safety critical applications in nuclear power plants, it would be possible to determine which systems should be modeled in the analysis of the larger plant wide PRA, at what level of detail the digital system should be modeled and using which methods. The research reported in this paper develops a categorization method using system attributes to permit a modeler to more effectively model the systems that will likely have the most critical contributions to the overall plant safety and to more effectively model system interactions for those digital systems where the interactions are most important to the overall accuracy and completeness of the plant PRA. The proposed methodology will categorize digital systems based on certain attributes of the systems themselves and how they will be used in the specific application. This will help determine what digital systems need to be modeled and at what level of detail, and can be used to guide PRA analysis and regulatory reviews. The three-attribute categorization strategy that was proposed by Arndt is used as the basis for the categorization methodology developed here. The first attribute, digital system complexity, is based on Type Il interactions defined by Aldemir and an overall digital system size and complexity index. The size and complexity index used are previously defined software complexity metrics. Potential sub-attributes of digital system complexity include, design complexity, software complexity, hardware complexity, system function complexity and testability. The second attribute, digital system interactions/inter-conductivity, is a combination of Rushby's coupling and Ademir's Type I interactions. Digital systems that are loosely coupled and/or have very few Type I interaction would not interact dynamically with the overall system and would have a low interactions/inter-conductivity score. Potential sub-attributes of

Digital Materials - Evaluation of the Possibilities of using Selected Hyperelastic Models to Describe Constitutive Relations

Science.gov (United States)

Mańkowski, J.; Lipnicki, J.

2017-08-01

The authors tried to identify the parameters of numerical models of digital materials, which are a kind of composite resulting from the manufacture of the product in 3D printers. With the arrangement of several heads of the printer, the new material can result from mixing of materials with radically different properties, during the process of producing single layer of the product. The new material has properties dependent on the base materials properties and their proportions. Digital materials tensile characteristics are often non-linear and qualify to be described by hyperelastic materials models. The identification was conducted based on the results of tensile tests models, its various degrees coefficients of the polynomials to various degrees coefficients of the polynomials. The Drucker's stability criterion was also examined. Fourteen different materials were analyzed.

Digital Hydrologic Networks Supporting Applications Related to Spatially Referenced Regression Modeling

Science.gov (United States)

Brakebill, J.W.; Wolock, D.M.; Terziotti, S.E.

2011-01-01

Digital hydrologic networks depicting surface-water pathways and their associated drainage catchments provide a key component to hydrologic analysis and modeling. Collectively, they form common spatial units that can be used to frame the descriptions of aquatic and watershed processes. In addition, they provide the ability to simulate and route the movement of water and associated constituents throughout the landscape. Digital hydrologic networks have evolved from derivatives of mapping products to detailed, interconnected, spatially referenced networks of water pathways, drainage areas, and stream and watershed characteristics. These properties are important because they enhance the ability to spatially evaluate factors that affect the sources and transport of water-quality constituents at various scales. SPAtially Referenced Regressions On Watershed attributes (SPARROW), a process-based/statistical model, relies on a digital hydrologic network in order to establish relations between quantities of monitored contaminant flux, contaminant sources, and the associated physical characteristics affecting contaminant transport. Digital hydrologic networks modified from the River Reach File (RF1) and National Hydrography Dataset (NHD) geospatial datasets provided frameworks for SPARROW in six regions of the conterminous United States. In addition, characteristics of the modified RF1 were used to update estimates of mean-annual streamflow. This produced more current flow estimates for use in SPARROW modeling. ?? 2011 American Water Resources Association. This article is a U.S. Government work and is in the public domain in the USA.

Piracy and Product Differentiation in the Market of Digital Goods

OpenAIRE

Alvisi Matteo; Argentesi Elena; Carbonara Emanuela

2003-01-01

We analyse how piracy affects the choice of quality of a monopolist producing a digital good. A digital good is a special kind of information good, for example a music CD, a DVD or an electronic magazine available online. An important feature of digital goods is that they can be copied without a decline in the copy's quality. We define piracy as both the production and the sale of illegal copies and the practice of file sharing through the Internet. Recently, the introduction of fast Internet...

Digital Modeling Phenomenon Of Surface Ground Movement

OpenAIRE

Ioan Voina; Maricel Palamariu; Iohan Neuner; Tudor Salagean; Dumitru Onose; Mircea Ortelecan; Anca Maria Moscovici; Mariana Calin

2016-01-01

With the development of specialized software applications it was possible to approach and resolve complex problems concerning automating and process optimization for which are being used field data. Computerized representation of the shape and dimensions of the Earth requires a detailed mathematical modeling, known as "digital terrain model". The paper aims to present the digital terrain model of Vulcan mining, Hunedoara County, Romania. Modeling consists of a set of mathematical equations th...

The Impact of Digital Video Technology on Production: The Case of "American Gothic."

Science.gov (United States)

Fink, Edward J.

1997-01-01

Opines that the study of video production is important in better understanding the aural/visual aspects of television, especially since television production is undergoing a digital revolution. Assesses the impact of new technologies by examining a "cutting-edge" program, "American Gothic." Finds that digital technology offers…

A Harmonized Process Model for Digital Forensic Investigation Readiness

OpenAIRE

Valjarevic , Aleksandar; Venter , Hein

2013-01-01

Part 2: FORENSIC MODELS; International audience; Digital forensic readiness enables an organization to prepare itself to perform digital forensic investigations in an efficient and effective manner. The benefits include enhancing the admissibility of digital evidence, better utilization of resources and greater incident awareness. However, a harmonized process model for digital forensic readiness does not currently exist and, thus, there is a lack of effective and standardized implementations...

Digital Competence Model of Distance Learning Students

Science.gov (United States)

da Silva, Ketia Kellen A.; Behar, Patricia A.

2017-01-01

This article presents the development of a digital competency model of Distance Learning (DL) students in Brazil called CompDigAl_EAD. The following topics were addressed in this study: Educational Competences, Digital Competences, and Distance Learning students. The model was developed between 2015 and 2016 and is being validated in 2017. It was…

Critical Perspectives on Youth Digital Media Production: "Voice" and Representation in Educational Contexts

Science.gov (United States)

Dahya, Negin

2017-01-01

This paper offers a critical discussion on voice and representation in youth digital media production in educational settings. The paper builds on existing calls from digital media and visual studies scholars to approach youth-made media with greater attention to context in production practices. In this discussion, the author addresses the…

Collaborative learning model inquiring based on digital game

Science.gov (United States)

Yuan, Jiugen; Xing, Ruonan

2012-04-01

With the development of computer education software, digital educational game has become an important part in our life, entertainment and education. Therefore how to make full use of digital game's teaching functions and educate through entertainment has become the focus of current research. The thesis make a connection between educational game and collaborative learning, the current popular teaching model, and concludes digital game-based collaborative learning model combined with teaching practice.

AWARENESS AND COGNITIVE LOAD LEVELS OF TEACHER CANDIDATES TOWARDS STUDENT PRODUCTS MADE BY DIGITAL STORYTELLING

Directory of Open Access Journals (Sweden)

Figen KILIC

2014-07-01

Full Text Available The purpose of this research is to assess the student products created by digital storytelling, and to determine the awareness towards learning the topic and the cognitive loads of students during the process. Research was performed with a total of 52 teacher candidates attending 2nd class at “Classroom Teacher” department of Mersin University Faculty of Education in 2012-2013 education years. General scanning model was used to determine the cognitive loads and awareness of student products, created by teacher candidates through digital storytelling, for learning the topic. As a result of the Research, we reached the conclusion that the awareness related to basic concepts and program created by digital storytelling increased, and there was not a cognitive overload. Also, students’ opinions were taken on the process and according to acquired data, it was concluded that the students were pleased with the process, their awareness increased, and they made plans to improve what they learned and use them in the future. In line with acquired findings, it was suggested that experimental studies should be made on this topic. -

Nuclear reactor and production systems with flux-optical digitizer

International Nuclear Information System (INIS)

Luger, P.P.; Nealen, J.P.

1979-01-01

Several digital sensing devices are described for use in automated production systems. The first described is for use in the automatic operation of a reactor. This device employs a binant electrometer using a quartz fiber mounted at one end but free to vibrate at the other in an AC field. The fiber oscillates if a charge is placed upon it. An optical slit replaces the ordinary eyepiece reticule scale. With the quartz fiber adjusted so its image is in focus at the optical slit, photoelectric signals are obtained at null charge on the fiber. The quartz fiber is repeatedly charged and allowed to discharge by collecting ions from a source under measurement. Each photoelectric signal causes a digital time reading to be taken. The time readings are used to evaluate the current due to the electric charge. The photoelectric signals, by feedback, also operate the electrometer for continuous intermittent-continuous operation. Basically the current is a current digitizer. Application is made to reactor monitoring and control as well as to other types of production systems. The flux-optical digitizer is a radiometer-like-structure carryig rotating fins that may be coated with fissionable material, such as 235 U for the purpose of neutron flux measurements. The rotating fins are mounted on a shaft that also carries an arm that produces photoelectric signals whenever the arm overlaps an optical slit and thus diminishes light from an auxiliary light flux source incident on the slit. Between successive photoelectric signals, time interval measurements are obtained. This and other sensing devices are fully described for various automated, controlled, production processes

The Advanced Data Acquisition Model (ADAM: A Process Model for Digital Forensic Practice

Directory of Open Access Journals (Sweden)

Richard Brian Adams

2013-12-01

Full Text Available As with other types of evidence, the courts make no presumption that digital evidence is reliable without some evidence of empirical testing in relation to the theories and techniques associated with its production. The issue of reliability means that courts pay close attention to the manner in which electronic evidence has been obtained and in particular the process in which the data is captured and stored. Previous process models have tended to focus on one particular area of digital forensic practice, such as law enforcement, and have not incorporated a formal description. We contend that this approach has prevented the establishment of generally accepted standards and processes that are urgently needed in the domain of digital forensics. This paper presents a generic process model as a step towards developing such a generally-accepted standard for a fundamental digital forensic activity – the acquisition of digital evidence. Normal 0 false false false EN-AU X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:12.0pt; mso-para-margin-left:0cm; text-indent:18.0pt; line-height:200%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-ansi-language:EN-US; mso-fareast-language:EN-US; mso-bidi-language:EN-US;}

A Revised Production Model of Learner-Generated Comic: Validation through Expert Review

OpenAIRE

Azman Farah Nadia; Zaibon Syamsul Bahrin; Shiratuddin Norshuhada

2018-01-01

Recent advancement of authoring tools has fostered a widespread interest towards using comics as a Digital Storytelling medium. This technology integrated learning approach is known as learner-generated comic production; where learners constructively produce digital stories in a form of educational comics. However, there were concerns towards the obstacles and challenges of producing learner-generated comics. Hence, a conceptual production model of learner-generated comic was proposed to guid...

Digital Materials – Evaluation of the Possibilities of using Selected Hyperelastic Models to Describe Constitutive Relations

Directory of Open Access Journals (Sweden)

Mańkowski J.

2017-08-01

Full Text Available The authors tried to identify the parameters of numerical models of digital materials, which are a kind of composite resulting from the manufacture of the product in 3D printers. With the arrangement of several heads of the printer, the new material can result from mixing of materials with radically different properties, during the process of producing single layer of the product. The new material has properties dependent on the base materials properties and their proportions. Digital materials tensile characteristics are often non-linear and qualify to be described by hyperelastic materials models. The identification was conducted based on the results of tensile tests models, its various degrees coefficients of the polynomials to various degrees coefficients of the polynomials. The Drucker’s stability criterion was also examined. Fourteen different materials were analyzed.

[Reliability of three dimensional resin model by rapid prototyping manufacturing and digital modeling].

Science.gov (United States)

Zeng, Fei-huang; Xu, Yuan-zhi; Fang, Li; Tang, Xiao-shan

2012-02-01

To describe a new technique for fabricating an 3D resin model by 3D reconstruction and rapid prototyping, and to analyze the precision of this method. An optical grating scanner was used to acquire the data of silastic cavity block , digital dental cast was reconstructed with the data through Geomagic Studio image processing software. The final 3D reconstruction was saved in the pattern of Stl. The 3D resin model was fabricated by fuse deposition modeling, and was compared with the digital model and gypsum model. The data of three groups were statistically analyzed using SPSS 16.0 software package. No significant difference was found in gypsum model,digital dental cast and 3D resin model (P>0.05). Rapid prototyping manufacturing and digital modeling would be helpful for dental information acquisition, treatment design, appliance manufacturing, and can improve the communications between patients and doctors.

Implementing The Automated Phases Of The Partially-Automated Digital Triage Process Model

Directory of Open Access Journals (Sweden)

Gary D Cantrell

2012-12-01

Full Text Available Digital triage is a pre-digital-forensic phase that sometimes takes place as a way of gathering quick intelligence. Although effort has been undertaken to model the digital forensics process, little has been done to date to model digital triage. This work discuses the further development of a model that does attempt to address digital triage the Partially-automated Crime Specific Digital Triage Process model. The model itself will be presented along with a description of how its automated functionality was implemented to facilitate model testing.

Digital rights management for digital cinema

Science.gov (United States)

Kirovski, Darko; Peinado, Marcus; Petitcolas, Fabien A. P.

2001-12-01

There is a wide consensus among the feature film production studios that the Internet era brings a new paradigm for film distribution to cinemas worldwide. The benefits of digital cinema to both producers and cinemas are numerous: significantly lower distribution and maintenance costs, immediate access to film libraries, higher presentation quality, and strong potential for developing new business models. Despite these advantages, the studios are still reluctant to jump into the digital age. The main showstopper for digital cinema is the danger of widespread piracy. Piracy already costs Hollywood an estimated two billion dollars annually and digital cinema without proper copyright enforcement could increase this number. In this paper, we present a copyright management system that aims at providing the set of necessary security tools: standard cryptographic primitives and copyright protection mechanisms that enable a reliable and secure feature film delivery system.

Uncovering Productivity Gains of Digital and Green Servitization: Implications from the Automotive Industry

Directory of Open Access Journals (Sweden)

Marco Opazo-Basáez

2018-05-01

Full Text Available The growing industrial concern about sustainability challenges has driven vehicle and auto parts manufacturers to adopt service capabilities as a way to maintain competitiveness in compliance with environmental regulations. As a result, automakers have progressively integrated digital and green service initiatives to support operations and address environmental issues effectively. The present study examined the effect of digital and green servitization on the firm’s productivity. To test their effect quantitatively, this study used the ORBIS database to construct a multi-country sample containing 228 companies in the automotive industry. Our findings indicate that implementation of digital and green servitization is positively associated with higher productivity outcomes once the two forms of servitization coexist and operate jointly. Moreover, the results of the study underscore the importance of establishing a successional pathway of implementation priorities. Our evidence suggests that firms willing to offer green services should consider offering digital services first, as this is the only way to obtain productivity gains from green servitization.

Mathematical modelling of digit specification by a sonic hedgehog gradient

KAUST Repository

Woolley, Thomas E.

2013-11-26

Background: The three chick wing digits represent a classical example of a pattern specified by a morphogen gradient. Here we have investigated whether a mathematical model of a Shh gradient can describe the specification of the identities of the three chick wing digits and if it can be applied to limbs with more digits. Results: We have produced a mathematical model for specification of chick wing digit identities by a Shh gradient that can be extended to the four digits of the chick leg with Shh-producing cells forming a digit. This model cannot be extended to specify the five digits of the mouse limb. Conclusions: Our data suggest that the parameters of a classical-type morphogen gradient are sufficient to specify the identities of three different digits. However, to specify more digit identities, this core mechanism has to be coupled to alternative processes, one being that in the chick leg and mouse limb, Shh-producing cells give rise to digits; another that in the mouse limb, the cellular response to the Shh gradient adapts over time so that digit specification does not depend simply on Shh concentration. Developmental Dynamics 243:290-298, 2014. © 2013 Wiley Periodicals, Inc.

Mathematical modelling of digit specification by a sonic hedgehog gradient

KAUST Repository

Woolley, Thomas E.; Baker, Ruth E.; Tickle, Cheryll; Maini, Philip K.; Towers, Matthew

2013-01-01

Background: The three chick wing digits represent a classical example of a pattern specified by a morphogen gradient. Here we have investigated whether a mathematical model of a Shh gradient can describe the specification of the identities of the three chick wing digits and if it can be applied to limbs with more digits. Results: We have produced a mathematical model for specification of chick wing digit identities by a Shh gradient that can be extended to the four digits of the chick leg with Shh-producing cells forming a digit. This model cannot be extended to specify the five digits of the mouse limb. Conclusions: Our data suggest that the parameters of a classical-type morphogen gradient are sufficient to specify the identities of three different digits. However, to specify more digit identities, this core mechanism has to be coupled to alternative processes, one being that in the chick leg and mouse limb, Shh-producing cells give rise to digits; another that in the mouse limb, the cellular response to the Shh gradient adapts over time so that digit specification does not depend simply on Shh concentration. Developmental Dynamics 243:290-298, 2014. © 2013 Wiley Periodicals, Inc.

3D digital anatomy modelling - Practical or pretty?

Science.gov (United States)

Murgitroyd, Ellen; Madurska, Marta; Gonzalez, Jasmina; Watson, Angus

2015-06-01

With an increasing move towards digitalisation of medical records and medical teaching, such as online exams and webinars, one of the questions that persists asks 'is there a place for digital anatomy teaching and can it effectively replace the traditional teaching methods such as cadaveric dissection?' Cadaveric dissection has a number of benefits as a teaching method but it also has its limitations. Although these can be partially addressed by prosections and new more "life-like" fixatives, it does not address the lack of resources and the increasing pressure to be able to study and learn at home. This paper reviews the literature with regards to the suitability of digital models for teaching and the wider uses a 3D digital anatomy model could have, such as postgraduate teaching, patient education and surgical planning. It also looks briefly at the learning model that anatomy as art contributes. The literature has scattered examples of digital models used for teaching at both undergraduate and postgraduate level, which demonstrate a number of positive outcomes, mostly surrounding user satisfaction and convenience. 3D modelling for patient education and operation planning has less exploration, and these papers generate a number of discussion points, mostly surrounding the practicality of digital models, which can be more time consuming and require the technology to be widely available and reliable. 3D digital anatomy is a useful adjunct to teaching and its use in patient education and operation planning have interesting possibilities still to be fully explored. Copyright © 2014 Royal College of Surgeons of Edinburgh (Scottish charity number SC005317) and Royal College of Surgeons in Ireland. Published by Elsevier Ltd. All rights reserved.

Tinjauan terhadap Model Bisnis Penyelenggaraan Penyiaran Tv Digital

Directory of Open Access Journals (Sweden)

Daniel P. Hutabarat

2014-06-01

Full Text Available TV broadcast systems are migrating from analogue to digital broadcasting system. Some countries in the world have completed this migration since a few years ago. America decided to stop broadcasting analog television in 2009. In Asia, Singapore launched this technology in 2004 and Malaysia implemented in 2006 (Depkominfo, 2009. With so many countries are migrating to digital broadcasting system, there are many business models that can be referred for organizing digital television broadcasts. In this writing, several business models that are used in the world will be reviewed and analyzed and the results can be a reference to determine the appropriate business model according to the organizers.

Proposing a Capability Perspective on Digital Business Models

OpenAIRE

Bärenfänger, Rieke; Otto, Boris

2015-01-01

Business models comprehensively describe the functioning of businesses in contemporary economic, technological, and societal environments. This paper focuses on the characteristics of digital business models from the perspective of capability research and develops a capability model for digital businesses. Following the design science research (DSR) methodology, multiple evaluation and design iterations were performed. Contributions to the design process came from IS/IT practice and the resea...

Emergent Principles for Digital Documentary

NARCIS (Netherlands)

Lachman, Richard

2016-01-01

textabstractDigital Documentaries are an area of rapid invention and experimentation at all levels, including creative content, production techniques, and business models.  As with many forms of digital storytelling, a focus on technologies can be distracting; platforms change rapidly, and are

Digital models: How can dental arch form be verified chairside?

Directory of Open Access Journals (Sweden)

Alana Tavares

Full Text Available ABSTRACT Introduction: Plaster dental casts are routinely used during clinical practice to access maxillary dental arch form and assist on fabrication of individualized orthodontic archwires. Recently introduced, digital model technology may offer a limitation for the obtainment of a dental physical record. In this context, a tool for dental arch form assessment for chairside use is necessary when employing digital models. In this regard, paper print of the dental arch seems thus to be useful. Methods: In the present study, 37 lower arch models were used. Intercanine and intermolar widths and dental arch length measurements were performed and compared using plaster dental casts, digital models and paper print image of the models. Ortho Insight 3D scanner was employed for model digitalization. Results: No statistically significant differences were noted regarding the measurements performed on the plaster or digital models (p> 0.05. Paper print images, however, showed subestimated values for intercanine and intermolar widths and overestimated values for dental arch length. Despite being statistically significant (p< 0.001, the differences were considered clinically negligible. Conclusion: The present study suggests that paper print images obtained from digital models are clinically accurate and can be used as a tool for dental arch form assessment for fabrication of individualized orthodontic archwires.

Digital models: How can dental arch form be verified chairside?

Science.gov (United States)

Tavares, Alana; Braga, Emanuel; de Araújo, Telma Martins

2017-01-01

ABSTRACT Introduction: Plaster dental casts are routinely used during clinical practice to access maxillary dental arch form and assist on fabrication of individualized orthodontic archwires. Recently introduced, digital model technology may offer a limitation for the obtainment of a dental physical record. In this context, a tool for dental arch form assessment for chairside use is necessary when employing digital models. In this regard, paper print of the dental arch seems thus to be useful. Methods: In the present study, 37 lower arch models were used. Intercanine and intermolar widths and dental arch length measurements were performed and compared using plaster dental casts, digital models and paper print image of the models. Ortho Insight 3D scanner was employed for model digitalization. Results: No statistically significant differences were noted regarding the measurements performed on the plaster or digital models (p> 0.05). Paper print images, however, showed subestimated values for intercanine and intermolar widths and overestimated values for dental arch length. Despite being statistically significant (p< 0.001), the differences were considered clinically negligible. Conclusion: The present study suggests that paper print images obtained from digital models are clinically accurate and can be used as a tool for dental arch form assessment for fabrication of individualized orthodontic archwires. PMID:29364382

Cost Analysis of a Digital Health Care Model in Sweden.

Science.gov (United States)

Ekman, Björn

2017-09-22

Digital technologies in health care are expected to increase in scope and to affect ever more parts of the health care system. It is important to enhance the knowledge of whether new digital methods and innovations provide value for money compared with traditional models of care. The objective of the study was to evaluate whether a digital health care model for primary care is a less costly alternative compared with traditional in-office primary care in Sweden. Cost data for the two care models were collected and analyzed to obtain a measure in local currency per care contact. The comparison showed that the total economic cost of a digital consultation is 1960 Swedish krona (SEK) (SEK100 = US$11.29; February 2017) compared with SEK3348 for a traditional consultation at a health care clinic. Cost differences arose on both the provider side and on the user side. The digital health care model may be a less costly alternative to the traditional health care model. Depending on the rate of digital substitution, gross economic cost savings of between SEK1 billion and SEK10 billion per year could be realized if more digital consultations were made. Further studies are needed to validate the findings, assess the types of care most suitable for digital care, and also to obtain various quality-adjusted outcome measures.

Digital Transformation of Lean Production: Systematic Approach for the Determination of Digitally Pervasive Value Chains

OpenAIRE

Peter Burggräf; Matthias Dannapfel; Hanno Voet; Patrick-Benjamin Bök; Jérôme Uelpenich; Julian Hoppe

2017-01-01

The increasing digitalization of value chains can help companies to handle rising complexity in their processes and thereby reduce the steadily increasing planning and control effort in order to raise performance limits. Due to technological advances, companies face the challenge of smart value chains for the purpose of improvements in productivity, handling the increasing time and cost pressure and the need of individualized production. Therefore, companies need to ensure quick and flexible ...

From alginate impressions to digital virtual models: accuracy and reproducibility.

Science.gov (United States)

Dalstra, Michel; Melsen, Birte

2009-03-01

To compare the accuracy and reproducibility of measurements performed on digital virtual models with those taken on plaster casts from models poured immediately after the impression was taken, the 'gold standard', and from plaster models poured following a 3-5 day shipping procedure of the alginate impression. Direct comparison of two measuring techniques. The study was conducted at the Department of Orthodontics, School of Dentistry, University of Aarhus, Denmark in 2006/2007. Twelve randomly selected orthodontic graduate students with informed consent. Three sets of alginate impressions were taken from the participants within 1 hour. Plaster models were poured immediately from two of the sets, while the third set was kept in transit in the mail for 3-5 days. Upon return a plaster model was poured as well. Finally digital models were made from the plaster models. A number of measurements were performed on the plaster casts with a digital calliper and on the corresponding digital models using the virtual measuring tool of the accompanying software. Afterwards these measurements were compared statistically. No statistical differences were found between the three sets of plaster models. The intra- and inter-observer variability are smaller for the measurements performed on the digital models. Sending alginate impressions by mail does not affect the quality and accuracy of plaster casts poured from them afterwards. Virtual measurements performed on digital models display less variability than the corresponding measurements performed with a calliper on the actual models.

Digital Picture Production and Picture aesthetic Competency in It-didactic Design

DEFF Research Database (Denmark)

Rasmussen, Helle

, that It and media are only used seldom by 21 % of teachers in Visual Arts and 7 % of teachers in this subject never use It and Media in these lessons. Art teachers – among others - also express the need for continuing education. (Ministeriet for Børn og Undervisning 2011). Since lessons in digital picture...... production have been a demand in Visual Arts in Danish schools for more than two decades, these conditions call for development of new didactic knowledge. Besides new genres and ways of using digital pictures and media continuously develop. (Sørensen 2002). This ought to be an incessant challenge...... subject Visual Arts – and crosswise of subjects in school. The overall research question has been: How can IT-didactic designs support lessons in production of complex meaning in digital pictures and increase the development of pupil’s picture aesthetic competences? By using the expression ‘complex...

Geometric Modeling and Reasoning of Human-Centered Freeform Products

CERN Document Server

Wang, Charlie C L

2013-01-01

The recent trend in user-customized product design requires the shape of products to be automatically adjusted according to the human body’s shape, so that people will feel more comfortable when wearing these products.  Geometric approaches can be used to design the freeform shape of products worn by people, which can greatly improve the efficiency of design processes in various industries involving customized products (e.g., garment design, toy design, jewel design, shoe design, and design of medical devices, etc.). These products are usually composed of very complex geometric shapes (represented by free-form surfaces), and are not driven by a parameter table but a digital human model with free-form shapes or part of human bodies (e.g., wrist, foot, and head models).   Geometric Modeling and Reasoning of Human-Centered Freeform Products introduces the algorithms of human body reconstruction, freeform product modeling, constraining and reconstructing freeform products, and shape optimization for improving...

Digital elevation model production from scanned topographic contour maps via thin plate spline interpolation

International Nuclear Information System (INIS)

Soycan, Arzu; Soycan, Metin

2009-01-01

GIS (Geographical Information System) is one of the most striking innovation for mapping applications supplied by the developing computer and software technology to users. GIS is a very effective tool which can show visually combination of the geographical and non-geographical data by recording these to allow interpretations and analysis. DEM (Digital Elevation Model) is an inalienable component of the GIS. The existing TM (Topographic Map) can be used as the main data source for generating DEM by amanual digitizing or vectorization process for the contours polylines. The aim of this study is to examine the DEM accuracies, which were obtained by TMs, as depending on the number of sampling points and grid size. For these purposes, the contours of the several 1/1000 scaled scanned topographical maps were vectorized. The different DEMs of relevant area have been created by using several datasets with different numbers of sampling points. We focused on the DEM creation from contour lines using gridding with RBF (Radial Basis Function) interpolation techniques, namely TPS as the surface fitting model. The solution algorithm and a short review of the mathematical model of TPS (Thin Plate Spline) interpolation techniques are given. In the test study, results of the application and the obtained accuracies are drawn and discussed. The initial object of this research is to discuss the requirement of DEM in GIS, urban planning, surveying engineering and the other applications with high accuracy (a few deci meters). (author)

Coastal Digital Elevation Models (DEMs)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Digital elevation models (DEMs) of U.S. and other coasts that typically integrate ocean bathymetry and land topography. The DEMs support NOAA's mission to understand...

Design in the digital textbook

DEFF Research Database (Denmark)

Ebbesen, Toke Riis

reorganization of the publishing company, web based user interfaces, and ultimately the branding, that market these new digital objects, are building powerful discourses around the product. Thus it is suggested that the design process of the iBog-case can be understood in a model of database-based publishing......Building on a preliminary case study of the Danish educational publisher, Systime A/S, and its flagship product, the web based ‘iBog’ {Systime 2014}, this paper explores how digital textbooks can be understood as design. The shaping of digital books is seen as intertwined in a wider circuit...... with multiple levels. In the final analysis, the iBog is much more than a product and a technology. It is a brand that goes beyond what can be studied by looking at the digital textbook as a singular artefact....

The Effect of Digital Documentary Production through Field Work on Geography Students' Problem-Solving Skills

Science.gov (United States)

Adanali, Rukiye

2018-01-01

In this study, views of students about the applicability of the digital documentary production through fieldwork model and the effect of it on their problem-solving skills were examined. The study was conducted in Turkey, in 2016-2017 spring term with 15 geography teacher candidates who chosen by convenience sampling method. In this study, within…

P-20 Model of Digital Citizenship.

Science.gov (United States)

Curran, Marialice B F X; Ribble, Mike

2017-03-01

This chapter explores a P-20 digital citizenship model that builds upon the respect, educate, and protect REP model beginning with our earliest learners through elementary, middle, high school, and college. © 2017 Wiley Periodicals, Inc., A Wiley Company.

On DSS Implementation in the Dynamic Model of the Digital Oil field

Science.gov (United States)

Korovin, Iakov S.; Khisamutdinov, Maksim V.; Kalyaev, Anatoly I.

2018-02-01

Decision support systems (DSS), especially based on the artificial intelligence (AI) techniques are been widely applied in different domains nowadays. In the paper we depict an approach of implementing DSS in to Digital Oil Field (DOF) dynamic model structure in order to reduce the human factor influence, considering the automation of all production processes to be the DOF model clue element. As the basic tool of data handling we propose the hybrid application on artificial neural networks and evolutional algorithms.

Digital curation: a proposal of a semi-automatic digital object selection-based model for digital curation in Big Data environments

Directory of Open Access Journals (Sweden)

Moisés Lima Dutra

2016-08-01

Full Text Available Introduction: This work presents a new approach for Digital Curations from a Big Data perspective. Objective: The objective is to propose techniques to digital curations for selecting and evaluating digital objects that take into account volume, velocity, variety, reality, and the value of the data collected from multiple knowledge domains. Methodology: This is an exploratory research of applied nature, which addresses the research problem in a qualitative way. Heuristics allow this semi-automatic process to be done either by human curators or by software agents. Results: As a result, it was proposed a model for searching, processing, evaluating and selecting digital objects to be processed by digital curations. Conclusions: It is possible to use Big Data environments as a source of information resources for Digital Curation; besides, Big Data techniques and tools can support the search and selection process of information resources by Digital Curations.

Human Digital Modeling & Hand Scanning Lab

Data.gov (United States)

Federal Laboratory Consortium — This laboratory incorporates specialized scanning equipment, computer workstations and software applications for the acquisition and analysis of digitized models of...

ALWAYS THE LITTLE BROTHER? DIGITAL-PRODUCT INNOVATION IN THE MEDIA SECTOR

OpenAIRE

HANNA-KAISA ELLONEN; PIIA KARHU

2006-01-01

This article concerns digital-product innovation within the media sector. From previous literature we identify eight factors affecting innovation work. Using material from narratives collected from experts within the media industry, we then present a specific framework that summarizes the factors affecting digital innovations either negatively or positively. We identify three underlying phenomena in the Finnish media sector that explain its specific features: First, it is a small market with ...

Multi-digit maximum voluntary torque production on a circular object

Science.gov (United States)

SHIM, JAE KUN; HUANG, JUNFENG; HOOKE, ALEXANDER W.; LATSH, MARK L.; ZATSIORSKY, VLADIMIR M.

2010-01-01

Individual digit-tip forces and moments during torque production on a mechanically fixed circular object were studied. During the experiments, subjects positioned each digit on a 6-dimensional force/moment sensor attached to a circular handle and produced a maximum voluntary torque on the handle. The torque direction and the orientation of the torque axis were varied. From this study, it is concluded that: (1) the maximum torque in the closing (clockwise) direction was larger than in the opening (counter clockwise) direction; (2) the thumb and little finger had the largest and the smallest share of both total normal force and total moment, respectively; (3) the sharing of total moment between individual digits was not affected by the orientation of the torque axis or by the torque direction, while the sharing of total normal force between the individual digit varied with torque direction; (4) the normal force safety margins were largest and smallest in the thumb and little finger, respectively. PMID:17454086

The Inclusion Potential of Student Production of Digital Learning Objects

DEFF Research Database (Denmark)

Levinsen, Karin Tweddell; Sørensen, Birgitte Holm

2016-01-01

This account of the inclusion potential of students’ digital production is based on the large-scale research and development project Students’ Digital Production and Students as Learning Designers (2013–2015), funded by the Danish Ministry of Education. The target groups were primary and lower......-designed framework that accommodates and empowers students’ agency. The Danish parliament passed the Law of Inclusion In 2012 with the objective that by 2015, 96% of all students would be included in normal classes. Inclusion was not part of the initial research agenda, but this changed unexpectedly during...... the project. Specifically, students who did not participate or participated only sporadically in everyday school activities at the beginning of the project adopted new positions as participants and agents. We understand these changes as inclusive processes initiated by the combination of teacher...

ISSUES ASSOCIATED WITH PROBABILISTIC FAILURE MODELING OF DIGITAL SYSTEMS

International Nuclear Information System (INIS)

CHU, T.L.; MARTINEZ-GURIDI, G.; LIHNER, J.; OVERLAND, D.

2004-01-01

The current U.S. Nuclear Regulatory Commission (NRC) licensing process of instrumentation and control (I and C) systems is based on deterministic requirements, e.g., single failure criteria, and defense in depth and diversity. Probabilistic considerations can be used as supplements to the deterministic process. The National Research Council has recommended development of methods for estimating failure probabilities of digital systems, including commercial off-the-shelf (COTS) equipment, for use in probabilistic risk assessment (PRA). NRC staff has developed informal qualitative and quantitative requirements for PRA modeling of digital systems. Brookhaven National Laboratory (BNL) has performed a review of the-state-of-the-art of the methods and tools that can potentially be used to model digital systems. The objectives of this paper are to summarize the review, discuss the issues associated with probabilistic modeling of digital systems, and identify potential areas of research that would enhance the state of the art toward a satisfactory modeling method that could be integrated with a typical probabilistic risk assessment

Proposals for the production of digital genres in English language textbooks

Directory of Open Access Journals (Sweden)

Karolinne Finamor Couto

2014-06-01

Full Text Available We intend, in this article, to discuss the results of a part of a Master research whose objective was to investigate whether the proposals for the production of digital genres in English language textbooks contribute to the development of literacies. Our theoretical discussions are based on the concept of genre (BAKHTIN, 2000; BRONCKART, 2009; MARCUSCHI, 2004, literacy (BRASIL, 2006; ROJO, 2009 and the guidelines of the National Curriculum Parameters (BRASIL, 1998. Our corpus - consisting of written production activities present in a didactic collection approved by PNLD/2011, Keep in Mind (CHIN; ZAORAB, 2009 - was analyzed in interface with the Guide and Announcement criteria, so that we could answer the research questions. Our results show that the criteria of the Announcement and the Guide are consistent, however, the proposals for written production do not effectively develop literacies, especially for not offering real communication practices in digital format, including therein the steps of the written production process: planning, writing and rewriting.

Digital Marketing Maturity Models: Overview and Comparison

OpenAIRE

Elina Bakhtieva

2017-01-01

The variety of available digital tools, strategies and activities might confuse and disorient even an experienced marketer. This applies in particular to B2B companies, which are usually less flexible in uptaking of digital technology than B2C companies. B2B companies are lacking a framework that corresponds to the specifics of the B2B business, and which helps to evaluate a company’s capabilities and to choose an appropriate path. A B2B digital marketing maturity model helps to fill this gap...

Modelling the Costs of Preserving Digital Assets

DEFF Research Database (Denmark)

Kejser, Ulla Bøgvad; Nielsen, Anders Bo; Thirifays, Alex

2012-01-01

Information is increasingly being produced in digital form, and some of it must be preserved for the longterm. Digital preservation includes a series of actively managed activities that require on-going funding. To obtain sufficient resources, there is a need for assessing the costs...... and the benefits accrued by preserving the assets. Cost data is also needed for optimizing activities and comparing the costs of different preservation alternatives. The purpose of this study is to analyse generic requirements for modelling the cost of preserving digital assets. The analysis was based...

Modeling of digital communication systems using SIMULINK

CERN Document Server

Giordano, Arthur A

2015-01-01

Arthur Giordano, PhD, is a consultant in the field of military and commercial communications specializing in wireless communications. He is a co-founder of G5 Scientific, LLC, is a senior member of the IEEE and has taught graduate communications courses. He has developed numerous models using MathWorks®' SIMULINK®® to characterize digital communications systems. Allen Levesque, PhD, is a consultant specializing in digital communications systems, and is a partner in G5 Scientific, LLC. He has taught graduate courses in digital communications at Worcester Polytechnic Institute and is currently

Digital entrepreneurship in a traditional production firm

DEFF Research Database (Denmark)

Hannibal, Martin; Rasmussen, Erik S.

2017-01-01

purpose spawns a digital business model that allows the company to change its relations to distributors, retailers and customers enabling access to direct communication with end-users. However, the emerging new business model has the potential to change the organization entirely. This paper argues...... that although the emerging business model was indeed a success seen from a sales-, marketing-, innovative-, and relational perspective, it was perceived as a disaster from an organizational perspective. Consequently, top management abandoned the new platform. The paper highlights the importance...

Digital Product Marketing Strategy on Campus%校园数码产品的营销战略

Institute of Scientific and Technical Information of China (English)

石研

2011-01-01

本文分析了校园市场以及IT数码产品的特点,并通过对IT数码产品在校园营销中存在的一些问题及大学生对数码产品的需求特点分析,得出了IT数码产品校园营销的策略。%This paper analyzes the market on campus and IT digital product characteristics,and through the IT digital product some problems in marketing on campus and college students＇ demanding characteristics for digital products,the author obtained IT digital pro

Digital Strategy Innovation : toward product and business model innovation to attain e-leadership

NARCIS (Netherlands)

Spil, Antonius A.M.; Kijl, Björn; Salmela, Hannu T.T.; Vasileno, Dmitry; Khazieva, Natalia

2016-01-01

New technological trends like services, big data, and mobile clouds increase the complexity of decision making on information strategy. This paper investigates whether a shift is visible from process-oriented digital technology utilization in digital strategies towards a more balanced and integrated

Evaluation of digital model accuracy and time-dependent deformation of alginate impressions.

Science.gov (United States)

Cesur, M G; Omurlu, I K; Ozer, T

2017-09-01

The aim of this study was to evaluate the accuracy of digital models produced with the three-dimensional dental scanner, and to test the dimensional stability of alginate impressions for durations of immediately (T0), 1 day (T1), and 2 days (T2). A total of sixty impressions were taken from a master model with an alginate, and were poured into plaster models in three different storage periods. Twenty impressions were directly scanned (negative digital models), after which plaster models were poured and scanned (positive digital models) immediately. The remaining 40 impressions were poured after 1 and 2 days. In total, 9 points and 11 linear measurements were used to analyze the plaster models, and negative and positive digital models. Time-dependent deformation of the alginate impressions and the accuracy of the conventional plaster models and digital models were evaluated separately. Plaster models, negative and positive digital models showed significant differences in nearly all measurements at T (0), T (1), and T (2) times (P 0.05), but they demonstrated statistically significant differences at T (2) time (P impressions is practicable method for orthodontists.

A NEW APPROACH OF DIGITAL BRIDGE SURFACE MODEL GENERATION

Directory of Open Access Journals (Sweden)

H. Ju

2012-07-01

Full Text Available Bridge areas present difficulties for orthophotos generation and to avoid “collapsed” bridges in the orthoimage, operator assistance is required to create the precise DBM (Digital Bridge Model, which is, subsequently, used for the orthoimage generation. In this paper, a new approach of DBM generation, based on fusing LiDAR (Light Detection And Ranging data and aerial imagery, is proposed. The no precise exterior orientation of the aerial image is required for the DBM generation. First, a coarse DBM is produced from LiDAR data. Then, a robust co-registration between LiDAR intensity and aerial image using the orientation constraint is performed. The from-coarse-to-fine hybrid co-registration approach includes LPFFT (Log-Polar Fast Fourier Transform, Harris Corners, PDF (Probability Density Function feature descriptor mean-shift matching, and RANSAC (RANdom Sample Consensus as main components. After that, bridge ROI (Region Of Interest from LiDAR data domain is projected to the aerial image domain as the ROI in the aerial image. Hough transform linear features are extracted in the aerial image ROI. For the straight bridge, the 1st order polynomial function is used; whereas, for the curved bridge, 2nd order polynomial function is used to fit those endpoints of Hough linear features. The last step is the transformation of the smooth bridge boundaries from aerial image back to LiDAR data domain and merge them with the coarse DBM. Based on our experiments, this new approach is capable of providing precise DBM which can be further merged with DTM (Digital Terrain Model derived from LiDAR data to obtain the precise DSM (Digital Surface Model. Such a precise DSM can be used to improve the orthophoto product quality.

Inter-arch digital model vs. manual cast measurements: Accuracy and reliability.

Science.gov (United States)

Kiviahde, Heikki; Bukovac, Lea; Jussila, Päivi; Pesonen, Paula; Sipilä, Kirsi; Raustia, Aune; Pirttiniemi, Pertti

2017-06-28

The purpose of this study was to evaluate the accuracy and reliability of inter-arch measurements using digital dental models and conventional dental casts. Thirty sets of dental casts with permanent dentition were examined. Manual measurements were done with a digital caliper directly on the dental casts, and digital measurements were made on 3D models by two independent examiners. Intra-class correlation coefficients (ICC), a paired sample t-test or Wilcoxon signed-rank test, and Bland-Altman plots were used to evaluate intra- and inter-examiner error and to determine the accuracy and reliability of the measurements. The ICC values were generally good for manual and excellent for digital measurements. The Bland-Altman plots of all the measurements showed good agreement between the manual and digital methods and excellent inter-examiner agreement using the digital method. Inter-arch occlusal measurements on digital models are accurate and reliable and are superior to manual measurements.

Pricing Digital Goods: Discontinuous Costs and Shared Infrastructure

OpenAIRE

Ke-Wei Huang; Arun Sundararajan

2006-01-01

We develop and analyze a model of pricing for digital products with discontinuous supply functions. This characterizes a number of information technology-based products and services for which variable increases in demand are fulfilled by the addition of "blocks" of computing or network infrastructure. Examples include internet service, telephony, online trading, on-demand software, digital music, streamed video-on-demand and grid computing. These goods are often modeled as information goods w...

Galveston, Texas Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) for select U.S. coastal regions. These integrated...

Savannah, Georgia Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) for select U.S. coastal regions. These integrated...

Biloxi, Mississippi Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) for select U.S. coastal regions. These integrated...

Puerto Rico Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) for select U.S. coastal regions. These integrated...

Hilo, Hawaii Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) for select U.S. coastal regions. These integrated...

Hanalei, Hawaii Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) for select U.S. coastal regions. These integrated...

Taholah, Washington Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) for select U.S. coastal regions. These integrated...

Chignik, Alaska Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) for select U.S. coastal regions. These integrated...

Monterey, California Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) for select U.S. coastal regions. These integrated...

Garibaldi, Oregon Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) for select U.S. coastal regions. These integrated...

Keauhou, Hawaii Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) for select U.S. coastal regions. These integrated...

Atka, Alaska Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) for select U.S. coastal regions. These integrated...

Lahaina, Hawaii Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) for select U.S. coastal regions. These integrated...

Kawaihae, Hawaii Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) for select U.S. coastal regions. These integrated...

Nikolski, Alaska Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) for select U.S. coastal regions. These integrated...

Shemya, Alaska Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) for select U.S. coastal regions. These integrated...

Portland, Maine Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) for select U.S. coastal regions. These integrated...

Craig, Alaska Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) for select U.S. coastal regions. These integrated...

Midway Atoll Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) for select U.S. coastal regions. These integrated...

Adak, Alaska Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) for select U.S. coastal regions. These integrated...

Cordova, Alaska Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) for select U.S. coastal regions. These integrated...

Nantucket, Massachusetts Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) for select U.S. coastal regions. These integrated...

Oahu, Hawaii Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) for select U.S. coastal regions. These integrated...

Central Oregon Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) for select U.S. coastal regions. These integrated...

Digital speech processing using Matlab

CERN Document Server

Gopi, E S

2014-01-01

Digital Speech Processing Using Matlab deals with digital speech pattern recognition, speech production model, speech feature extraction, and speech compression. The book is written in a manner that is suitable for beginners pursuing basic research in digital speech processing. Matlab illustrations are provided for most topics to enable better understanding of concepts. This book also deals with the basic pattern recognition techniques (illustrated with speech signals using Matlab) such as PCA, LDA, ICA, SVM, HMM, GMM, BPN, and KSOM.

The chicken foot digital replant training model.

Science.gov (United States)

Athanassopoulos, Thanassi; Loh, Charles Yuen Yung

2015-01-01

A simple, readily available digital replantation model in the chicken foot is described. This high fidelity model will hopefully allow trainees in hand surgery to gain further experience in replant surgery prior to clinical application.

Digital Architecture Planning Model

International Nuclear Information System (INIS)

Oxstrand, Johanna Helene; Al Rashdan, Ahmad Yahya Mohammad; Bly, Aaron Douglas; Rice, Brandon Charles; Fitzgerald, Kirk; Wilson, Keith Leon

2016-01-01

As part of the U.S. Department of Energy's Light Water Reactor Sustainability Program, the Digital Architecture (DA) Project focuses on providing a model that nuclear utilities can refer to when planning deployment of advanced technologies. The digital architecture planning model (DAPM) is the methodology for mapping power plant operational and support activities into a DA that unifies all data sources needed by the utilities to operate their plants. The DA is defined as a collection of information technology capabilities needed to support and integrate a wide spectrum of real-time digital capabilities for performance improvements of nuclear power plants. DA can be thought of as integration of the separate instrumentation and control and information systems already in place in nuclear power plants, which are brought together for the purpose of creating new levels of automation in plant work activities. A major objective in DAPM development was to survey all key areas that needed to be reviewed in order for a utility to make knowledgeable decisions regarding needs and plans to implement a DA at the plant. The development was done in two steps. First, researchers surveyed the nuclear industry in order to learn their near-term plans for adopting new advanced capabilities and implementing a network (i.e., wireless and wire) infrastructure throughout the plant, including the power block. Secondly, a literature review covering regulatory documents, industry standards, and technical research reports and articles was conducted. The objective of the review was to identify key areas to be covered by the DAPM, which included the following: 1. The need for a DA and its benefits to the plant 2. Resources required to implement the DA 3. Challenges that need to be addressed and resolved to implement the DA 4. Roles and responsibilities of the DA implementation plan. The DAPM was developed based on results from the survey and the literature review. Model development

Digital Architecture Planning Model

Energy Technology Data Exchange (ETDEWEB)

Oxstrand, Johanna Helene [Idaho National Lab. (INL), Idaho Falls, ID (United States). Light Water Reactor Sustainability Program (LWRS); Al Rashdan, Ahmad Yahya Mohammad [Idaho National Lab. (INL), Idaho Falls, ID (United States). Light Water Reactor Sustainability Program (LWRS); Bly, Aaron Douglas [Idaho National Lab. (INL), Idaho Falls, ID (United States). Light Water Reactor Sustainability Program (LWRS); Rice, Brandon Charles [Idaho National Lab. (INL), Idaho Falls, ID (United States). Light Water Reactor Sustainability Program (LWRS); Fitzgerald, Kirk [Idaho National Lab. (INL), Idaho Falls, ID (United States). Light Water Reactor Sustainability Program (LWRS); Wilson, Keith Leon [Idaho National Lab. (INL), Idaho Falls, ID (United States). Light Water Reactor Sustainability Program (LWRS)

2016-03-01

As part of the U.S. Department of Energy’s Light Water Reactor Sustainability Program, the Digital Architecture (DA) Project focuses on providing a model that nuclear utilities can refer to when planning deployment of advanced technologies. The digital architecture planning model (DAPM) is the methodology for mapping power plant operational and support activities into a DA that unifies all data sources needed by the utilities to operate their plants. The DA is defined as a collection of information technology capabilities needed to support and integrate a wide spectrum of real-time digital capabilities for performance improvements of nuclear power plants. DA can be thought of as integration of the separate instrumentation and control and information systems already in place in nuclear power plants, which are brought together for the purpose of creating new levels of automation in plant work activities. A major objective in DAPM development was to survey all key areas that needed to be reviewed in order for a utility to make knowledgeable decisions regarding needs and plans to implement a DA at the plant. The development was done in two steps. First, researchers surveyed the nuclear industry in order to learn their near-term plans for adopting new advanced capabilities and implementing a network (i.e., wireless and wire) infrastructure throughout the plant, including the power block. Secondly, a literature review covering regulatory documents, industry standards, and technical research reports and articles was conducted. The objective of the review was to identify key areas to be covered by the DAPM, which included the following: 1. The need for a DA and its benefits to the plant 2. Resources required to implement the DA 3. Challenges that need to be addressed and resolved to implement the DA 4. Roles and responsibilities of the DA implementation plan. The DAPM was developed based on results from the survey and the literature review. Model development, including

Southeast Alaska Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) to support individual coastal States as part of the...

Tatitlek, Alaska Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) to support individual coastal States as part of the...

Hoonah, Alaska Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) to support individual coastal States as part of the...

Whittier, Alaska Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) to support individual coastal States as part of the...

Gustavus, Alaska Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) to support individual coastal States as part of the...

Chenega, Alaska Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) to support individual coastal States as part of the...

Juneau, Alaska Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) to support individual coastal States as part of the...

Mariana Trench Bathymetric Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) created a bathymetric digital elevation model (DEM) for the Mariana Trench and adjacent seafloor in the Western...

Unalaska, Alaska Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) to support individual coastal States as part of the...

CREATING DIGITAL ELEVATION MODEL USING A MOBILE DEVICE

Directory of Open Access Journals (Sweden)

A. İ. Durmaz

2017-11-01

Full Text Available DEM (Digital Elevation Models is the best way to interpret topography on the ground. In recent years, lidar technology allows to create more accurate elevation models. However, the problem is this technology is not common all over the world. Also if Lidar data are not provided by government agencies freely, people have to pay lots of money to reach these point clouds. In this article, we will discuss how we can create digital elevation model from less accurate mobile devices’ GPS data. Moreover, we will evaluate these data on the same mobile device which we collected data to reduce cost of this modeling.

MODEL-ORIENTED METHOD OF DESIGN IMPLEMENTATION WHEN CREATING DIGITAL FILTERS

Directory of Open Access Journals (Sweden)

V. Levinskyi

2016-12-01

Full Text Available This article discusses the example of model-oriented method of design and development of digital low-pass filters (LPF for automatic control systems (ACS. Typically, high frequency noise and disturbance attenuation is carried out by analogue LPF. However, technical implementation of analogue filters higher than the second order arouse certain difficulties related with the need of precise passive components ratings selection (resistors, capacitors. If the noise and disturbances spectral composition is known, it is possible to build digital LPF with the Nyquist frequency greater than the maximum frequency in the noise spectrum. Such possibility has appeared because of cheap, energy-efficient, high-speed 32-bit microcontrollers market entry. They have analogue signals sampling rate of 30 kHz and above. The traditional approach using the “manual” method of filter parameters calculation, obtaining their recurrence expressions and further program implementation requires high qualification and a lot of time consumption from the developer. An alternative to this approach is the model-oriented method of design (MOMD in MatLab environment when in the one environment the design of digital LPF, verificaton of its performance as a part of the ACS, generation and compilation of program codes for selected microcontroller family take place. MOMD can also be used in the designs of bandpass and bandstop filters for adaptive control systems or systems of technical diagnostics. If during the commissioning or the operation of ACS there is a need in digital LPF parameters change then this operation can be performed within half an hour. MOMD technology allows to significantly reduce the time for developing a specific product without loss of quality in its design ‘cause of extensive possibilities of MatLab development environment.

International Entry Modes for Digital Product Providers

DEFF Research Database (Denmark)

Rask, Morten

Often internationalization of the firm refers to the process of increasing involvement in international operations. In relation to e-business many authors have argued that e-business will change the internationalization processes. E-business is about digitalization of processes, products and actors...... (Fredsted, 2003). The case study gives insight into one of the few international marketplaces. Scanmarket has expanded to the English, German, American and Swedish markets. Essentially the case raises the question: "To what extent does the Internet supersede firms' need for local, physical presence?"...

A Comprehensive and Harmonized Digital Forensic Investigation Process Model.

Science.gov (United States)

Valjarevic, Aleksandar; Venter, Hein S

2015-11-01

Performing a digital forensic investigation (DFI) requires a standardized and formalized process. There is currently neither an international standard nor does a global, harmonized DFI process (DFIP) exist. The authors studied existing state-of-the-art DFIP models and concluded that there are significant disparities pertaining to the number of processes, the scope, the hierarchical levels, and concepts applied. This paper proposes a comprehensive model that harmonizes existing models. An effort was made to incorporate all types of processes proposed by the existing models, including those aimed at achieving digital forensic readiness. The authors introduce a novel class of processes called concurrent processes. This is a novel contribution that should, together with the rest of the model, enable more efficient and effective DFI, while ensuring admissibility of digital evidence. Ultimately, the proposed model is intended to be used for different types of DFI and should lead to standardization. © 2015 American Academy of Forensic Sciences.

Digitalization and the global technology trends

Science.gov (United States)

Ignat, V.

2017-08-01

Digitalization, connected products and services, and shortening innovation cycles are widely discussed topics in management practice and theory and demand for new concepts. We analysed how companies innovated their business models and how are the new the technology trends. We found out, that have a positive approach to digitalization but the technology strategy still runs its original business model. Digitalization forces to new solution orientation. For companies it is necessary to master the digital transformation, new innovations have to be developed. Furthermore, digitalization / Industry 4.0 linking the real-life factory with virtual reality, will play an increasingly important role in global manufacturing. Companies have to obtain new digital capabilities, in order to make their company sustainable for the future. A long term growth and welfare in Europe could be guaranteed only by new technology innovation.

Do Digital Systems and Concept in Modern Public Service Production Have a Negative Impact on Citizens as End-Users?

DEFF Research Database (Denmark)

Pedersen, John Storm; Rendtorff, Jacob Dahl

2016-01-01

Do digital systems and concepts in modern public service production have a negative impact on citizens as end-users? To answer this research question, we shall first present our theoretical framework ‘the institutional logics perspective’ and show how we deploy this on modern public service...... production. Second, we claim that digital systems and concepts develop a new institutional logic within modern public service production: the ‘digital logic’. Third, we analyze and discuss the new logic´s possible impact on citizens as end-users. Fourth, we discuss the ethical dimensions of values and ethics...... in relation to public service production and digitizing....

Reinvention of publishers' revenue model: expectations of advertisers towards publishers' products

OpenAIRE

Koller, Hans; Dennstedt, Bianca

2017-01-01

Publishers have to reconsider their revenue model. Facing a massive decline in the circulation of newspapers and magazines over the past years, publishers have lost not only readers but also many advertisers. Thus, publishers are faced with both changed customer expectations as well as difficulty in generating profit. Users are increasingly less willing to pay for digital products and their expectations of digital content have changed: They would like to contribute their own content as well a...

The use of U.S. Geological Survey digital geospatial data products for science research

Science.gov (United States)

Varanka, Dalia E.; Deering, Carol; Caro, Holly

2012-01-01

The development of geographic information system (GIS) transformed the practice of geographic science research. The availability of low-cost, reliable data by the U.S. Geological Survey (USGS) supported the advance of GIS in the early stages of the transition to digital technology. To estimate the extent of the scientific use of USGS digital geospatial data products, a search of science literature databases yielded numbers of articles citing USGS products. Though this method requires careful consideration to avoid false positives, these citation numbers of three types of products (vector, land-use/land-cover, and elevation data) were graphed, and the frequency trends were examined. Trends indicated that the use of several, but not all, products increased with time. The use of some products declined and reasons for these declines are offered. To better understand how these data affected the design and outcomes of research projects, the study begins to build a context for the data by discussing digital cartographic research preceding the production of mass-produced products. The data distribution methods used various media for different system types and were supported by instructional material. The findings are an initial assessment of the affect of USGS products on GIS-enabled science research. A brief examination of the specific papers indicates that USGS data were used for science and GIS conceptual research, advanced education, and problem analysis and solution applications.

Digital Flora

OpenAIRE

Bunnell, Katie

2007-01-01

This research is concerned with developing a new business model for flexible small scale ceramic production that exploits the customisation capabilities of digital manufacturing technologies and the market potential and global connectivity of the world wide web. It is arguably of particular relevance to regional economic development in remote areas (Amin, Tomaney, Sabel) such as Cornwall where there is a culture of high quality small scale production, limited market and manufacturing opportun...

Application of Tecnomatix Plant Simulation for Modeling Production and Logistics Processes

Directory of Open Access Journals (Sweden)

Julia Siderska

2016-06-01

Full Text Available The main objective of the article was to present the possibilities and examples of using Tecnomatix Plant Simulation (by Siemens to simulate the production and logistics processes. This tool allows to simulate discrete events and create digital models of logistic systems (e.g. production, optimize the operation of production plants, production lines, as well as individual logistics processes. The review of implementations of Tecnomatix Plant Simulation for modeling processes in production engineering and logistics was conducted and a few selected examples of simulations were presented. The author’s future studies are going to focus on simulation of production and logistic processes and their optimization with the use of genetic algorithms and artificial neural networks.

Comparison of conventional study model measurements and 3D digital study model measurements from laser scanned dental impressions

Science.gov (United States)

Nugrahani, F.; Jazaldi, F.; Noerhadi, N. A. I.

2017-08-01

The field of orthodontics is always evolving,and this includes the use of innovative technology. One type of orthodontic technology is the development of three-dimensional (3D) digital study models that replace conventional study models made by stone. This study aims to compare the mesio-distal teeth width, intercanine width, and intermolar width measurements between a 3D digital study model and a conventional study model. Twelve sets of upper arch dental impressions were taken from subjects with non-crowding teeth. The impressions were taken twice, once with alginate and once with polivinylsiloxane. The alginate impressions used in the conventional study model and the polivinylsiloxane impressions were scanned to obtain the 3D digital study model. Scanning was performed using a laser triangulation scanner device assembled by the School of Electrical Engineering and Informatics at the Institut Teknologi Bandung and David Laser Scan software. For the conventional model, themesio-distal width, intercanine width, and intermolar width were measured using digital calipers; in the 3D digital study model they were measured using software. There were no significant differences between the mesio-distal width, intercanine width, and intermolar width measurments between the conventional and 3D digital study models (p>0.05). Thus, measurements using 3D digital study models are as accurate as those obtained from conventional study models

A COMPREHENSIVE MODEL FOR THE POWER TRANSFORMER DIGITAL DIFFERENTIAL PROTECTION FUNCTIONING RESEARCH

Directory of Open Access Journals (Sweden)

Yu. V. Rumiantsev

2016-01-01

Full Text Available This article presents a comprehensive model for the two-winding power transformer digital differential protection functioning research. Considered comprehensive model is developed in MatLab-Simulink dynamic simulation environment with the help of SimPowerSystems component library and includes the following elements: power supply, three-phase power transformer, wye-connected current transformers and two-winding power transformer digital differential protection model. Each element of the presented model is described in the degree sufficient for its implementation in the dynamic simulation environment. Particular attention is paid to the digital signal processing principles and to the ways of differential and restraining currents forming of the considered comprehensive model main element – power transformer digital differential protection. With the help of this model the power transformer digital differential protection functioning was researched during internal and external faults: internal short-circuit, external short-circuit with and without current transformers saturation on the power transformer low-voltage side. Each experiment is illustrated with differential and restraining currents waveforms of the digital differential protection under research. Particular attention was paid to the digital protection functioning analysis during power transformer abnormal modes: overexcitation and inrush current condition. Typical current waveforms during these modes were showed and their harmonic content was investigated. The causes of these modes were analyzed in details. Digital differential protection blocking algorithms based on the harmonic content were considered. Drawbacks of theses algorithms were observed and the need of their further technical improvement was marked.

Licensing of digital Instrumentation and Control in Radioisotope Production Facility

International Nuclear Information System (INIS)

Abdel-Aziz, L.Kh.; Lashin, R.; Mostafa, W.

2012-01-01

In spite of the rapid development of digital I and C systems in all major industries, it has for several reasons been slower in nuclear power plants. The most important reason is that only a few new plants have been ordered worldwide during the last ten years. A second reason is connected to the efforts needed in providing adequate evidence that the digital I and C system can be used in safety and safety related applications. This issue is connected to the effort needed in obtaining adequate assurance that the digital I and C will fulfill its intended function and contain no unintended function in all possible operational states during its entire life cycle. This paper presents an acceptance criteria for licensing a digital instrumentation and control system in a Radioisotope Production Facility(1), which is under commissioning. The acceptance criteria ensure that the I and C systems are designed to reach the highest degree of reliability with respect to the function they perform, operators will have clear and accessible availability to data on every plant parameter, and also ensure that the safety objectives have been covered

Evaluation of using digital gravity field models for zoning map creation

Science.gov (United States)

Loginov, Dmitry

2018-05-01

At the present time the digital cartographic models of geophysical fields are taking a special significance into geo-physical mapping. One of the important directions to their application is the creation of zoning maps, which allow taking into account the morphology of geophysical field in the implementation automated choice of contour intervals. The purpose of this work is the comparative evaluation of various digital models in the creation of integrated gravity field zoning map. For comparison were chosen the digital model of gravity field of Russia, created by the analog map with scale of 1 : 2 500 000, and the open global model of gravity field of the Earth - WGM2012. As a result of experimental works the four integrated gravity field zoning maps were obtained with using raw and processed data on each gravity field model. The study demonstrates the possibility of open data use to create integrated zoning maps with the condition to eliminate noise component of model by processing in specialized software systems. In this case, for solving problem of contour intervals automated choice the open digital models aren't inferior to regional models of gravity field, created for individual countries. This fact allows asserting about universality and independence of integrated zoning maps creation regardless of detail of a digital cartographic model of geo-physical fields.

Pilot production system cost/benefit analysis: Digital document storage project

Science.gov (United States)

1989-01-01

The Digital Document Storage (DDS)/Pilot Production System (PPS) will provide cost effective electronic document storage, retrieval, hard copy reproduction, and remote access for users of NASA Technical Reports. The DDS/PPS will result in major benefits, such as improved document reproduction quality within a shorter time frame than is currently possible. In addition, the DDS/PPS will provide an important strategic value through the construction of a digital document archive. It is highly recommended that NASA proceed with the DDS Prototype System and a rapid prototyping development methodology in order to validate recent working assumptions upon which the success of the DDS/PPS is dependent.

Comparison of Bolton analysis and Little’s irregularity index on laser scanned three-dimensional digital study models with conventional study models

Science.gov (United States)

Kurnia, H.; Noerhadi, N. A. I.

2017-08-01

Three-dimensional digital study models were introduced following advances in digital technology. This study was carried out to assess the reliability of digital study models scanned by a laser scanning device newly assembled. The aim of this study was to compare the digital study models and conventional models. Twelve sets of dental impressions were taken from patients with mild-to-moderate crowding. The impressions were taken twice, one with alginate and the other with polyvinylsiloxane. The alginate impressions were made into conventional models, and the polyvinylsiloxane impressions were scanned to produce digital models. The mesiodistal tooth width and Little’s irregularity index (LII) were measured manually with digital calipers on the conventional models and digitally on the digital study models. Bolton analysis was performed on each study models. Each method was carried out twice to check for intra-observer variability. The reproducibility (comparison of the methods) was assessed using independent-sample t-tests. The mesiodistal tooth width between conventional and digital models did not significantly differ (p > 0.05). Independent-sample t-tests did not identify statistically significant differences for Bolton analysis and LII (p = 0.603 for Bolton and p = 0894 for LII). The measurements of the digital study models are as accurate as those of the conventional models.

Digital Tectonics

DEFF Research Database (Denmark)

Christiansen, Karl; Borup, Ruben; Søndergaard, Asbjørn

2014-01-01

Digital Tectonics treats the architectonical possibilities in digital generation of form and production. The publication is the first volume of a series, in which aspects of the strategic focus areas of the Aarhus School of Architecture will be disseminated.......Digital Tectonics treats the architectonical possibilities in digital generation of form and production. The publication is the first volume of a series, in which aspects of the strategic focus areas of the Aarhus School of Architecture will be disseminated....

Models of digital competence and online activity of Russian adolescents

Directory of Open Access Journals (Sweden)

Galina U. Soldatova

2016-06-01

Full Text Available Having established the conception of digital competence consisting of four components (knowledge, skills, motivation and responsibility implemented in four areas (content, communication, consumption, and the techno-sphere, we propose the idea of models of digital competence as a specific systems of adolescents’ beliefs about their abilities and desires in the online world. These models (1 may be realistic or illusory, (2 their development is mediated by the motivation and online activity and (3 they regulate further online activities as well as the further development of digital competence. On the basis of nationwide study of digital competence (N=1203 Russian adolescents of 12-17 years using latent class method we revealed 5 models of digital competence corresponding to its lowest level, the average level at high and low motivation, high specific (in the components of skill and safety and high general level. It has been shown that higher appraisal of their digital competence is related to the opportunity of a more prolonged and self-service access to the Internet as well as the history of independent development of skills online. The illusion of digital competence is associated with a wide but shallow exploration activities online. Motivational component is related to the participation and recognition of the role of others in the development of digital competence, in comparison with others’ online skills and knowledge, as well as subjectively lower «digital divide» with parents. We suggest that the motivational component of the digital competence is developed if adolescent has a successful interaction via Internet, learn from other people and also if the range of her activities and interests online activity involves and requires the development of new skills. Based on digital competence model’s analysis, we have figured out 3 main types of Internet-users: (1 beginners, (2 experienced users, (3 advanced users. All these types fall into

Integrated Digital Platform for the Valorization of a Cultural Landscape

Science.gov (United States)

Angheluţǎ, L. M.; Ratoiu, L.; Chelmus, A. I.; Rǎdvan, R.; Petculescu, A.

2017-05-01

This paper presents a newly started demonstrative project regarding the implementation and validation of an interdisciplinary research model for the Aluniş-Bozioru (Romania) cultural landscape, with the development of an online interactive digital product. This digital product would provide complementary data about the historical monuments and their environment, and also, constant updates and statistical comparison in order to generate an accurate evaluation of the state of conservation for this specific cultural landscape. Furthermore, the resulted information will contribute in the decision making process for the regional development policies. The project is developed by an interdisciplinary joint team of researchers consisted of technical scientists with great experience in advanced non-invasive characterization of the cultural heritage (NIRD for Optoelectronics - INOE 2000) and a group of experts from geology and biology (Romanian Academy's "Emil Racoviţǎ" Institute of Speleology - ISER). Resulted scientific data will include: 3D digital models of the selected historical monuments, microclimate monitoring, Ground Penetrating Radar survey, airborne LIDAR, multispectral and thermal imaging, soil and rock characterization, environmental studies. This digital product is constituted by an intuitive website with a database that allows data corroboration, visualization and comparison of the 3D digital models, as well as a digital mapping in the GIS system.

CUSTOMER INTERACTION ON DIGITAL ECONOMY: A CASE STUDY

Directory of Open Access Journals (Sweden)

Mateus Tavares da Silva Cozer

2007-10-01

Full Text Available On a digital economy context, customer interaction is fundamental to any company to provide competitive advantage. This research intends to give concrete answers for the sea of information complexity which is the Internet. The main case is to build a model of digital customer interaction. Customization extends beyond targeted media to include the design and delivery of the product itself. Venkatraman (1998 defines dynamic customization based on three principles: modularity, intelligence and organization. The research is based on Interaction Model and its variables are: Products, Modularity, Artificial Intelligence, Market driven organization, and virtual communities. Two organizations were studied, one with physical product and another with virtual product, and the results were shown from a qualitative research.

Architectural Optimization of Digital Libraries

Science.gov (United States)

Biser, Aileen O.

1998-01-01

This work investigates performance and scaling issues relevant to large scale distributed digital libraries. Presently, performance and scaling studies focus on specific implementations of production or prototype digital libraries. Although useful information is gained to aid these designers and other researchers with insights to performance and scaling issues, the broader issues relevant to very large scale distributed libraries are not addressed. Specifically, no current studies look at the extreme or worst case possibilities in digital library implementations. A survey of digital library research issues is presented. Scaling and performance issues are mentioned frequently in the digital library literature but are generally not the focus of much of the current research. In this thesis a model for a Generic Distributed Digital Library (GDDL) and nine cases of typical user activities are defined. This model is used to facilitate some basic analysis of scaling issues. Specifically, the calculation of Internet traffic generated for different configurations of the study parameters and an estimate of the future bandwidth needed for a large scale distributed digital library implementation. This analysis demonstrates the potential impact a future distributed digital library implementation would have on the Internet traffic load and raises questions concerning the architecture decisions being made for future distributed digital library designs.

Non-linear hybrid control oriented modelling of a digital displacement machine

DEFF Research Database (Denmark)

Pedersen, Niels Henrik; Johansen, Per; Andersen, Torben O.

2017-01-01

Proper feedback control of digital fluid power machines (Pressure, flow, torque or speed control) requires a control oriented model, from where the system dynamics can be analyzed, stability can be proven and design criteria can be specified. The development of control oriented models for hydraulic...... Digital Displacement Machines (DDM) is complicated due to non-smooth machine behavior, where the dynamics comprises both analog, digital and non-linear elements. For a full stroke operated DDM the power throughput is altered in discrete levels based on the ratio of activated pressure chambers....... In this paper, a control oriented hybrid model is established, which combines the continuous non-linear pressure chamber dynamics and the discrete shaft position dependent activation of the pressure chambers. The hybrid machine model is further extended to describe the dynamics of a Digital Fluid Power...

What Learners "Know" through Digital Media Production: Learning by Design

Science.gov (United States)

Mills, Kathy A.

2010-01-01

The power to influence others in ever expanding social networks in the new knowledge economy is tied to capabilities with digital media production that require increased technological knowledge. This article draws on research in primary classrooms to examine the repertoires of cross-disciplinary knowledge that literacy learners need to produce…

ASTER Global Digital Elevation Model V002

Data.gov (United States)

National Aeronautics and Space Administration — The Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) Global Digital Elevation Model (GDEM) was developed jointly by the U.S. National...

Digital Platforms as Factor Transforming Management Models in Businesses and Industries

Science.gov (United States)

Dimitrakiev, D.; Molodchik, A. V.

2018-05-01

Increasingly, digital platforms are built into the value chain, acting as an intermediary between the manufacturer and the consumer. The paper presents tendencies and features of business model transformation in connection with management of the new digital technologies. The limitations of traditional business models and the capabilities of business models based on digital platforms and self-organization were revealed. In the study, the viability of the new business model for the dental industry was confirmed and the new concept of the branch self-organizing control system based on the information platform, blockchain, cryptocurrency and reward of target consumer is offered, including mechanisms that make the model attractive for both the consumer and the service provider.

Digital disruption of the banking industry: Threat or opportunity?

OpenAIRE

Krstić Nataša; Tešić Dejan

2016-01-01

If the previous decade in the banking business was marked by excessive credit expansion, today we are talking about a decade of its digital transformation. Under the influence of digital media and tremendous changes in technology and consumer needs, banks are exposed to digital disruption of their business models both from the inside and outside, which all leads to innovations in products, services, sales and distribution channels, business models and ultimately organizational culture. Sector...

A digital model for planning water management at Benton Lake National Wildlife Refuge, west-central Montana

Science.gov (United States)

Nimick, David A.; McCarthy, Peter M.; Fields, Vanessa

2011-01-01

Benton Lake National Wildlife Refuge is an important area for waterfowl production and migratory stopover in west-central Montana. Eight wetland units covering about 5,600 acres are the essential features of the refuge. Water availability for the wetland units can be uncertain owing to the large natural variations in precipitation and runoff and the high cost of pumping supplemental water. The U.S. Geological Survey, in cooperation with the U.S. Fish and Wildlife Service, has developed a digital model for planning water management. The model can simulate strategies for water transfers among the eight wetland units and account for variability in runoff and pumped water. This report describes this digital model, which uses a water-accounting spreadsheet to track inputs and outputs to each of the wetland units of Benton Lake National Wildlife Refuge. Inputs to the model include (1) monthly values for precipitation, pumped water, runoff, and evaporation; (2) water-level/capacity data for each wetland unit; and (3) the pan-evaporation coefficient. Outputs include monthly water volume and flooded surface area for each unit for as many as 5 consecutive years. The digital model was calibrated by comparing simulated and historical measured water volumes for specific test years.

The Three-dimensional Digital Factory for Shipbuilding Technology Research

Directory of Open Access Journals (Sweden)

Xu Wei

2016-01-01

Full Text Available The three-dimensional digital factory technology research is the hotspot in shipbuilding recently. The three-dimensional digital factory technology not only focus on design the components of the product, but also discuss on the simulation and analyses of the production process.Based on the three-dimensional model, the basic data layer, application control layer and the presentation layer of hierarchical structure are established in the three-dimensional digital factory of shipbuilding in this paper. And the key technologies of three-dimensional digital factory of shipbuilding are analysed. Finally, a case study is applied and the results show that the three-dimensional digital factory will play an important role in the future.

Twelve tips for the production of digital chalk-talk videos.

Science.gov (United States)

Rana, Jasmine; Besche, Henrike; Cockrill, Barbara

2017-06-01

Increasingly over the past decade, faculty in medical and graduate schools have received requests from digital millennial learners for concise faculty-made educational videos. At our institution, over the past couple of years alone, several hundred educational videos have been created by faculty who teach in a flipped-classroom setting of the pre-clinical medical school curriculum. Despite the appeal and potential learning benefits of digital chalk-talk videos first popularized by Khan Academy, we have observed that the conceptual and technological barriers for creating chalk-talk videos can be high for faculty. To this end, this tips article offers an easy-to-follow 12-step conceptual framework to guide at-home production of chalk-talk educational videos.

The MEDIA model: An innovative method for digitizing and training community members to facilitate an HIV prevention intervention.

Science.gov (United States)

Renfro, Tiffaney; Johnson, Erin; Lambert, Danielle N; Wingood, Gina; DiClemente, Ralph J

2018-02-17

As human immunodeficiency virus (HIV) continues to disproportionately affect African American women, practitioners remain committed to developing innovative strategies to reduce HIV prevalence. These strategies include training community organizations, such as churches, and utilizing digital media to make intervention dissemination more sustainable. This article describes one such effort to train lay community members within predominantly Black churches in Atlanta, GA, to implement an HIV prevention intervention. Lay educators were trained by translating a face-to-face Training of Facilitators (TOF) to a digital platform using the MEDIA (Motivate-Engage-Digitize-Implement-Assess) model. Formative evaluations, consultation with experts in the digital platform of choice, and the experience of two P4 for Women Master Trainers informed our translation. The model guided the translation process as our research team worked alongside topical experts and a production company to develop storyboards for core curriculum activities, which were later scripted and filmed with mock participants. A user guide, toolkit, and program website were also developed as supplemental materials to accompany the video training. Lessons learned from this study indicate future attempts at digitizing TOFs should keep in mind that digitization can be a time-consuming process, pilot testing in the new format is necessary even for a previously tested intervention, and the structure provided by facilitators in face-to-face training must be embedded into the format of digitized trainings.

[Reconstruction and measurement of a digital dental model using grating projection and reverse engineering].

Science.gov (United States)

Zhenzhen, Wang; Yi, Lu; Jun, Song; Jun, Chen; Qin, Zhou

2015-02-01

This work lays the foundation for establishing a digital model database with normal occlusion. A digital dental cast is acquired through grating projection, and model features are measured through reverse engineering. The grating projection system controlled by a computer was projected onto the surface of a normal dental model. Three-dimensional contour data were obtained through multi-angle shooting. A three-dimensional model was constructed, and the model features were analyzed by using reverse engineering. The digital model was compared with the plaster model to determine the accuracy of the measurement system. The structure of three-dimensional reconstruction model was clear. The digital models of two measurements exhibited no significant difference (P > 0.05). When digital and plaster models were measured, we found that the crown length and arch width were not statistically different (P > 0.05), whereas the difference between the crown width and arch length was statistically significant (P model by using the grating projection technique and reverse engineering can be used for dental model measurement in clinic al and scientific research and can provide a scientific method for establishing a digital model database with normal occlusion.

Kopernik : modeling business processes for digital customers

OpenAIRE

Estañol Lamarca, Montserrat; Castro, Manuel; Díaz-Montenegro, Sylvia; Teniente López, Ernest

2016-01-01

This paper presents the Kopernik methodology for modeling business processes for digital customers. These processes require a high degree of flexibility in the execution of their tasks or actions. We achieve this by using the artifact-centric approach to process modeling and the use of condition-action rules. The processes modeled following Kopernik can then be implemented in an existing commercial tool, Balandra.

Kachemak Bay, Alaska Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) for select U.S. coastal regions. These integrated...

Virginia Beach, Virginia Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) for select U.S. coastal regions. These integrated...

Santa Barbara, California Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) for select U.S. coastal regions. These integrated...

Ocean City, Maryland Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) for select U.S. coastal regions. These integrated...

King Cove, Alaska Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) for select U.S. coastal regions. These integrated...

Panama City, Florida Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) for select U.S. coastal regions. These integrated...

Montauk, New York Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) for select U.S. coastal regions. These integrated...

Sand Point, Alaska Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) for select U.S. coastal regions. These integrated...

La Push, Washington Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) for select U.S. coastal regions. These integrated...

Arena Cove, California Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) for select U.S. coastal regions. These integrated...

Port Orford, Oregon Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) for select U.S. coastal regions. These integrated...

Arecibo, Puerto Rico Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) for select U.S. coastal regions. These integrated...

Grenada Digital Elevation Model - 1 arc-second

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Centers for Environmental Information is building high-resolution digital elevation models (DEMs) for select U.S. coastal regions. These integrated...

Guayama, Puerto Rico Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) for select U.S. coastal regions. These integrated...

Fajardo, Puerto Rico Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) for select U.S. coastal regions. These integrated...

Corpus Christi, Texas Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) for select U.S. coastal regions. These integrated...

Dutch Harbor, Alaska Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) for select U.S. coastal regions. These integrated...

Ponce, Puerto Rico Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) for select U.S. coastal regions. These integrated...

Daytona Beach, Florida Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) for select U.S. coastal regions. These integrated...

Digital health for the End TB Strategy: developing priority products and making them work.

Science.gov (United States)

Falzon, Dennis; Timimi, Hazim; Kurosinski, Pascal; Migliori, Giovanni Battista; Van Gemert, Wayne; Denkinger, Claudia; Isaacs, Chris; Story, Alistair; Garfein, Richard S; do Valle Bastos, Luis Gustavo; Yassin, Mohammed A; Rusovich, Valiantsin; Skrahina, Alena; Van Hoi, Le; Broger, Tobias; Abubakar, Ibrahim; Hayward, Andrew; Thomas, Bruce V; Temesgen, Zelalem; Quraishi, Subhi; von Delft, Dalene; Jaramillo, Ernesto; Weyer, Karin; Raviglione, Mario C

2016-07-01

In 2014, the World Health Organization (WHO) developed the End TB Strategy in response to a World Health Assembly Resolution requesting Member States to end the worldwide epidemic of tuberculosis (TB) by 2035. For the strategy's objectives to be realised, the next 20 years will need novel solutions to address the challenges posed by TB to health professionals, and to affected people and communities. Information and communication technology presents opportunities for innovative approaches to support TB efforts in patient care, surveillance, programme management and electronic learning. The effective application of digital health products at a large scale and their continued development need the engagement of TB patients and their caregivers, innovators, funders, policy-makers, advocacy groups, and affected communities.In April 2015, WHO established its Global Task Force on Digital Health for TB to advocate and support the development of digital health innovations in global efforts to improve TB care and prevention. We outline the group's approach to stewarding this process in alignment with the three pillars of the End TB Strategy. The supplementary material of this article includes target product profiles, as developed by early 2016, defining nine priority digital health concepts and products that are strategically positioned to enhance TB action at the country level. The content of this work is ©the authors or their employers. Design and branding are ©ERS 2016.

THE CONTRIBUTION OF THE PRODUCTION OF DIGITAL VIDEOS BY DISCIPLES OF A MUNICIPAL SCHOOL IN THE CONSTRUCTION OF CONTEXTUALIZED KNOWLEDGE IN SCIENCE TEACHING

Directory of Open Access Journals (Sweden)

Sebastiao Silva Vieira

2017-10-01

Full Text Available This work presents an intervention research and participant that analyzes how the production of digital videos by students of a municipal school brings contributions to the construction of the knowledge contextualized in the teaching of sciences. For this purpose, references were used to cover four thematic areas: the use of digital technologies in the school context; The contextualization of contents in science education; Communication and mediation in school; And finally the production of digital video in science education. The qualitative methodology used, using semi-structured interviews and participant observation. Previously, the beginnings of the work of the students, workshops were created to create digital video, then a semistructured interview was carried out, in the post-production phase, with the students and the teacher. The results show that the production of digital videos have brought significant contributions to the students since participating in the workshop of video production, to the stage of conclusion and presentation of digital video in the classroom. With this, the students used the production of digital video as a differentiated methodology, source of research and production of knowledge. Participants, directors, learners and authors in the elaboration of the video, searching information related to the content, performing readings, planning the production, the "script", accompanying the assembly, using digital technologies in production, disseminating and participating in debates collectively. They constructed the knowledge proposed in science teaching and brought the curricular content studied into practice, reinforcing the discussion about the use and production of digital video as an educational tool.

Port Alexander Alaska Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) to support individual coastal States as part of the...

Tardos fingerprinting codes in the combined digit model

NARCIS (Netherlands)

Skoric, B.; Katzenbeisser, S.; Schaathun, H.G.; Celik, M.U.

2009-01-01

We introduce a new attack model for collusion-secure codes, called the combined digit model, which represents signal processing attacks against the underlying watermarking level better than existing models. In this paper, we analyze the performance of two variants of the Tardos code and show that

Study on modeling technology in digital reactor system

International Nuclear Information System (INIS)

Liu Xiaoping; Luo Yuetong; Tong Lili

2004-01-01

Modeling is the kernel part of a digital reactor system. As an extensible platform for reactor conceptual design, it is very important to study modeling technology and develop some kind of tools to speed up preparation of all classical computing models. This paper introduces the background of the project and basic conception of digital reactor. MCAM is taken as an example for modeling and its related technologies used are given. It is an interface program for MCNP geometry model developed by FDS team (ASIPP and HUT), and designed to run on windows system. MCAM aims at utilizing CAD technology to facilitate creation of MCNP geometry model. There have been two ways for MCAM to utilize CAD technology: (1) Making use of user interface technology in aid of generation of MCNP geometry model; (2) Making use of existing 3D CAD model to accelerate creation of MCNP geometry model. This paper gives an overview of MCAM's major function. At last, several examples are given to demonstrate MCAM's various capabilities. (authors)

New Orleans, Louisiana Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) for select U.S. coastal regions in the Gulf of Mexico....

Digital Modeling and Shaping of Design Practices

DEFF Research Database (Denmark)

Reijonen, Satu

This paper focuses on the role of digital modeling in shaping coordinative practices between architects and energy engineers in construction design. The paper presents a case study of the use of an energy performance calculation programme, a numeric digital modeling tool, that not only enables...... coordination between the two communities but also shapes coordinative practices around the emerging building. The paper draws on two interlinked strands of literature that have engaged in the role of material artefacts in the social: the entanglement of technology in organizing and management (Orlikowski 2000......, 2010), and the socio-material constructivist studies of technology (Akrich 1992, Akrich et al. 2000, Latour 1991). The programme influences the coordinative practices in following ways: it shapes the modus of interaction between energy engineers and architects and enforces particular jurisdictional...

Digital image technology and a measurement tool in physical models

CSIR Research Space (South Africa)

Phelp, David

2006-05-01

Full Text Available Advances in digital image technology has allowed us to use accurate, but relatively cost effective technology to measure a number of varied activities in physical models. The capturing and manipulation of high resolution digital images can be used...

Digital Human Modeling

Science.gov (United States)

Dischinger, H. Charles, Jr.

2017-01-01

The development of models to represent human characteristics and behaviors in human factors is broad and general. The term "model" can refer to any metaphor to represent any aspect of the human; it is generally used in research to mean a mathematical tool for the simulation (often in software, which makes the simulation digital) of some aspect of human performance and for the prediction of future outcomes. This section is restricted to the application of human models in physical design, e.g., in human factors engineering. This design effort is typically human interface design, and the digital models used are anthropometric. That is, they are visual models that are the physical shape of humans and that have the capabilities and constraints of humans of a selected population. They are distinct from the avatars used in the entertainment industry (movies, video games, and the like) in precisely that regard: as models, they are created through the application of data on humans, and they are used to predict human response; body stresses workspaces. DHM enable iterative evaluation of a large number of concepts and support rapid analysis, as compared with use of physical mockups. They can be used to evaluate feasibility of escape of a suited astronaut from a damaged vehicle, before launch or after an abort (England, et al., 2012). Throughout most of human spaceflight, little attention has been paid to worksite design for ground workers. As a result of repeated damage to the Space Shuttle which adversely affected flight safety, DHM analyses of ground assembly and maintenance have been developed over the last five years for the design of new flight systems (Stambolian, 2012, Dischinger and Dunn Jackson, 2014). The intent of these analyses is to assure the design supports the work of the ground crew personnel and thereby protect the launch vehicle. They help the analyst address basic human factors engineering questions: can a worker reach the task site from the work platform

“Freemium” business models in publishing. New packaging for the needs of readers in the digital age

Directory of Open Access Journals (Sweden)

Ivona Despot

2015-07-01

Full Text Available In a digital environment, the traditional roles of authors and publishers change. The shift of power from authors, publishers and/or content to the platform affects the development of new business models, and shaping the content in the digital environment becomes a major challenge for publishers. The subscription models of the content sale have long been present in other media industries. Editing, design and marketing are the key features that a publisher develops and adapts to changes. The traditional skills of publishers are no longer sufficient. Instead, a continued integration of innovative solutions is needed. The aim of this paper is to explore how the emergence of subscription models influences the development of new publishing products which bring together the author and the publisher in a joint effort to reach a larger number of readers.

Digital models for architectonical representation

Directory of Open Access Journals (Sweden)

Stefano Brusaporci

2011-12-01

Full Text Available Digital instruments and technologies enrich architectonical representation and communication opportunities. Computer graphics is organized according the two phases of visualization and construction, that is modeling and rendering, structuring dichotomy of software technologies. Visualization modalities give different kinds of representations of the same 3D model and instruments produce a separation between drawing and image’s creation. Reverse modeling can be related to a synthesis process, ‘direct modeling’ follows an analytic procedure. The difference between interactive and not interactive applications is connected to the possibilities offered by informatics instruments, and relates to modeling and rendering. At the same time the word ‘model’ describes different phenomenon (i.e. files: mathematical model of the building and of the scene; raster representation and post-processing model. All these correlated different models constitute the architectonical interpretative model, that is a simulation of reality made by the model for improving the knowledge.

From Product Models to Product State Models

DEFF Research Database (Denmark)

Larsen, Michael Holm

1999-01-01

A well-known technology designed to handle product data is Product Models. Product Models are in their current form not able to handle all types of product state information. Hence, the concept of a Product State Model (PSM) is proposed. The PSM and in particular how to model a PSM is the Research...

Quality Assurance Model for Digital Adult Education Materials

Science.gov (United States)

Dimou, Helen; Kameas, Achilles

2016-01-01

Purpose: This paper aims to present a model for the quality assurance of digital educational material that is appropriate for adult education. The proposed model adopts the software quality standard ISO/IEC 9126 and takes into account adult learning theories, Bloom's taxonomy of learning objectives and two instructional design models: Kolb's model…

FPGA-Based Real Time, Multichannel Emulated-Digital Retina Model Implementation

Directory of Open Access Journals (Sweden)

Zsolt Vörösházi

2009-01-01

Full Text Available The function of the low-level image processing that takes place in the biological retina is to compress only the relevant visual information to a manageable size. The behavior of the layers and different channels of the neuromorphic retina has been successfully modeled by cellular neural/nonlinear networks (CNNs. In this paper, we present an extended, application-specific emulated-digital CNN-universal machine (UM architecture to compute the complex dynamic of this mammalian retina in video real time. The proposed emulated-digital implementation of multichannel retina model is compared to the previously developed models from three key aspects, which are processing speed, number of physical cells, and accuracy. Our primary aim was to build up a simple, real-time test environment with camera input and display output in order to mimic the behavior of retina model implementation on emulated digital CNN by using low-cost, moderate-sized field-programmable gate array (FPGA architectures.

Digital Banking 2025

OpenAIRE

Gasser, Urs; Gassmann, Oliver; Hens, Thorsten; Leifer, Larry; Puschmann, Thomas; Zhao, Leon

2017-01-01

As time-to-market for digital banking products becomes shorter and shorter, thousands of Financial Technology (FinTech) startups and other non-banks are rising to the occasion by developing new products, services, and business models for all areas of banking in payments,investments, and financing along the entire value chain, touching all areas from front to back office, as client adoption of these new services accelerates. The lighting Company Osram, for example, recently had to reduce its w...

Application of Digital Terrain Model to volcanology

Directory of Open Access Journals (Sweden)

V. Achilli

2006-06-01

Full Text Available Three-dimensional reconstruction of the ground surface (Digital Terrain Model, DTM, derived by airborne GPS photogrammetric surveys, is a powerful tool for implementing morphological analysis in remote areas. High accurate 3D models, with submeter elevation accuracy, can be obtained by images acquired at photo scales between 1:5000-1:20000. Multitemporal DTMs acquired periodically over volcanic area allow the monitoring of areas interested by crustal deformations and the evaluation of mass balance when large instability phenomena or lava flows have occurred. The work described the results obtained from the analysis of photogrammetric data collected over the Vulcano Island from 1971 to 2001. The data, processed by means of the Digital Photogrammetry Workstation DPW 770, provided DTM with accuracy ranging between few centimeters to few decimeters depending on the geometric image resolution, terrain configuration and quality of photographs.

The Digital Turn in the French Audiovisual Model

Directory of Open Access Journals (Sweden)

Olivier Alexandre

2016-07-01

Full Text Available This article deals with the digital turn in the French audiovisual model. An organizational and legal system has evolved with changing technology and economic forces over the past thirty years. The high-income television industry served as the key element during the 1980s to compensate for a shifting value economy from movie theaters to domestic screens and personal devices. However, the growing competition in the TV sector and the rise of tech companies have initiated a disruption process. A challenged French conception copyright, the weakened position of TV channels and the scaling of content market all now call into question the sustainability of the French model in a digital era.

Emergent Principles for Digital Documentary

Directory of Open Access Journals (Sweden)

Richard Lachman

2016-12-01

Full Text Available Digital Documentaries are an area of rapid invention and experimentation at all levels, including creative content, production techniques, and business models.  As with many forms of digital storytelling, a focus on technologies can be distracting; platforms change rapidly, and are dependent on external commercial forces rather than creative potential.  This article presents several design strategies for driving experimentation in digital documentary above and beyond the specific of platform and technology. The core focus is on treating digital docs as experiences, with an expanded range of designable moments, as well as a strategic approach to designing interactions for their unique set of challenges.  The discussion is not intended to fully define digital documentary design factors, but rather, defines a useful subset of methods that can lead emerging practitioners to new innovations in their approach.

Evaluation of statistical and geostatistical models of digital soil properties mapping in tropical mountain regions

Directory of Open Access Journals (Sweden)

Waldir de Carvalho Junior

2014-06-01

Full Text Available Soil properties have an enormous impact on economic and environmental aspects of agricultural production. Quantitative relationships between soil properties and the factors that influence their variability are the basis of digital soil mapping. The predictive models of soil properties evaluated in this work are statistical (multiple linear regression-MLR and geostatistical (ordinary kriging and co-kriging. The study was conducted in the municipality of Bom Jardim, RJ, using a soil database with 208 sampling points. Predictive models were evaluated for sand, silt and clay fractions, pH in water and organic carbon at six depths according to the specifications of the consortium of digital soil mapping at the global level (GlobalSoilMap. Continuous covariates and categorical predictors were used and their contributions to the model assessed. Only the environmental covariates elevation, aspect, stream power index (SPI, soil wetness index (SWI, normalized difference vegetation index (NDVI, and b3/b2 band ratio were significantly correlated with soil properties. The predictive models had a mean coefficient of determination of 0.21. Best results were obtained with the geostatistical predictive models, where the highest coefficient of determination 0.43 was associated with sand properties between 60 to 100 cm deep. The use of a sparse data set of soil properties for digital mapping can explain only part of the spatial variation of these properties. The results may be related to the sampling density and the quantity and quality of the environmental covariates and predictive models used.

The multiplicity of the digital textbook as design object

DEFF Research Database (Denmark)

Riis Ebbesen, Toke

2015-01-01

Building on a preliminary case study of the Danish educational publisher Systime A/S and its flagship product, the web-based ‘iBog’/‘iBook’, this article explores how digital textbooks can be understood as design. The shaping of digital books is seen as being intertwined in a wider circuit...... reorganization of the publishing company, web-based user interfaces, and ultimately the branding, which market these new digital objects, are building power- ful discourses around the product. Thus it is suggested that the design process of the iBog case can be understood in a model of database-based publishing...... with multiple levels. In the final analysis, the iBog is much more than a product and a technology. It is a brand that goes beyond what can be studied by looking at the digital textbook as a singular artefact....

Pharmacology Students' Perceptions of Creating Multimodal Digital Explanations

Science.gov (United States)

Nielsen, W.; Hoban G.; Hyland, C. J. T.

2017-01-01

Students can now digitally construct their own representations of scientific concepts using a variety of modes including writing, diagrams, 2-D and 3-D models, images or speech, all of which communicate meaning. In this study, final-year chemistry students studying a pharmacology subject created a ''blended media'' digital product as an assignment…

From Process to Practice: Towards a Practice-Based Model of Digital Innovation

DEFF Research Database (Denmark)

Ciriello, Raffaele; Richter, Alexander; Schwabe, Gerhard

2017-01-01

companies and an extensive set of empirical data, this paper conceptualizes four interrelated digital innovation practices, namely making sense of an idea, aligning mental models, negotiating solution paths, and crafting an idea. We suggest a practice-based model of digital innovation, specify a set......The ongoing digitalization of many corporate functions, including the innovation process, brings about fundamental changes that urge us to rethink established theories. Facilitating digital innovation requires a deep understanding of the actual practices that are carried out by innovating people...... with the help of artifacts. In this paper, we study the use of artifacts and illustrate their different roles in the underlying innovation practices to provide rich insights into digital innovation from a practice perspective. Grounded in a nearly three year-long, qualitative case study at two Swiss software...

Quantum random oracle model for quantum digital signature

Science.gov (United States)

Shang, Tao; Lei, Qi; Liu, Jianwei

2016-10-01

The goal of this work is to provide a general security analysis tool, namely, the quantum random oracle (QRO), for facilitating the security analysis of quantum cryptographic protocols, especially protocols based on quantum one-way function. QRO is used to model quantum one-way function and different queries to QRO are used to model quantum attacks. A typical application of quantum one-way function is the quantum digital signature, whose progress has been hampered by the slow pace of the experimental realization. Alternatively, we use the QRO model to analyze the provable security of a quantum digital signature scheme and elaborate the analysis procedure. The QRO model differs from the prior quantum-accessible random oracle in that it can output quantum states as public keys and give responses to different queries. This tool can be a test bed for the cryptanalysis of more quantum cryptographic protocols based on the quantum one-way function.

Digital business innovation: roadmaps and attitudes from a FutureEnterprise perspective

OpenAIRE

Viscusi, Gianluigi

2015-01-01

The paper investigates the potential axes and dimensions of roadmaps for digital business innovation for entrepreneurs as well as enterprises. Actually, digital business innovation requires a change of perspective with regard to IT governance and management of IT infrastructure. This is due to the need to adapt them to the constant evolution and changes in business models, consequent to the digitalization of company products and services. Also, the paper considers the business models fitting ...

LBA-ECO LC-01 SRTM 90-Meter Digital Elevation Model, Northern Ecuadorian Amazon

Data.gov (United States)

National Aeronautics and Space Administration — This data set, LBA-ECO LC-01 SRTM 90-Meter Digital Elevation Model, Northern Ecuadorian Amazon, provides 90-meter resolution Digital Elevation Model data used in the...

A model for the distribution of watermarked digital content on mobile networks

Science.gov (United States)

Frattolillo, Franco; D'Onofrio, Salvatore

2006-10-01

Although digital watermarking can be considered one of the key technologies to implement the copyright protection of digital contents distributed on the Internet, most of the content distribution models based on watermarking protocols proposed in literature have been purposely designed for fixed networks and cannot be easily adapted to mobile networks. On the contrary, the use of mobile devices currently enables new types of services and business models, and this makes the development of new content distribution models for mobile environments strategic in the current scenario of the Internet. This paper presents and discusses a distribution model of watermarked digital contents for such environments able to achieve a trade-off between the needs of efficiency and security.

A Model of Digital Payment Infrastructure Formation and Development

DEFF Research Database (Denmark)

Staykova, Kalina; Damsgaard, Jan

2014-01-01

in the regulatory environment and combining it with the disruptive and innovative nature of the mobile phone, the result is a market that is rapidly transforming from well-established structure into a state of flux. We build a model to understand and explain this transformation of the digital payment infrastructure....... The model captures the formation and development of the digital payment infrastructure with a particular emphasis on the regulator´s and innovator’s perspective. It consists of four stages characterized by slow incremental change which are followed by short and rapid bursts of discontinuity. Each stage...

Do Digital Systems and Concept in Modern Public Service Production Have a Negative Impact on Citizens as End-Users?

DEFF Research Database (Denmark)

Pedersen, John Storm; Rendtorff, Jacob Dahl

2016-01-01

production. Second, we claim that digital systems and concepts develop a new institutional logic within modern public service production: the ‘digital logic’. Third, we analyze and discuss the new logic´s possible impact on citizens as end-users. Fourth, we discuss the ethical dimensions of values and ethics...

The impact of digitalization on business models

NARCIS (Netherlands)

Bouwman, W.A.G.A.; Nikou, Shahrokh; Molina-Castillo, Francisco Jose; de Reuver, G.A.

2018-01-01

Purpose: This paper aims to explore how digital technologies have forced small- to medium-sized enterprises (SMEs) to reconsider and experiment with their business models (BMs) and how this contributes to their innovativeness and performance. Design/methodology/approach: An empirical study has

Towards a Disruptive Digital Platform Model

DEFF Research Database (Denmark)

Kazan, Erol

that digital platforms leverage on three strategic design elements (i.e., business, architecture, and technology design) to create supportive conditions for facilitating disruption. To shed light on disruptive digital platforms, I opted for payment platforms as my empirical context and unit of analysis......Digital platforms are layered modular information technology architectures that support disruption. Digital platforms are particularly disruptive, as they facilitate the quick release of digital innovations that may replace established innovations. Yet, despite their support for disruption, we have...... not fully understood how such digital platforms can be strategically designed and configured to facilitate disruption. To that end, this thesis endeavors to unravel disruptive digital platforms from the supply perspective that are grounded on strategic digital platform design elements. I suggest...

Estimation of elastic modulus of reinforcement corrosion products using inverse analysis of digital image correlation measurements for input in corrosion-induced cracking model

DEFF Research Database (Denmark)

Pease, Bradley Justin; Michel, Alexander; Thybo, Anna Emilie A.

2012-01-01

A combined experimental and numerical approach for estimating the elastic modulus of reinforcement corrosion products is presented. Deformations between steel and mortar were measured using digital image correlation during accelerated corrosion testing at 100 μA/cm2 (~1.16 mm/year). Measured defo...

Designing Social Production Models to Support Producer-Consumer Collaboration and Innovation in Digital Social Spaces

Science.gov (United States)

Arakji, Reina Y.

2009-01-01

The first decade of the twenty-first century has seen dramatic advances in Internet technologies. Digital social spaces have emerged as popular Internet applications that are radically changing how firms and consumers of digital content interact. In the first chapter "Research Agenda" I introduce my research and the context within which it is…

Business models for digital repositories

CERN Document Server

CERN. Geneva; Bjørnshauge, Lars

2007-01-01

Those setting up, or planning to set up, a digital repository may be interested to know more about what has gone before them. What is involved, what is the cost, how many people are needed, how have others made the case to their institution, and how do you get anything into it once it is built? I have recently undertaken a study of European repository business models for the DRIVER project and will present an overview of the findings.

Effect of digital impressions and production protocols on the adaptation of zirconia copings.

Science.gov (United States)

Kocaağaoğlu, Hasan; Kılınç, Halil Ibrahim; Albayrak, Haydar

2017-01-01

Proper marginal, axial, and occlusal adaptation of dental restorations is essential for their long-term success. Production protocols including digital impression systems have been developed, but little information is available on the adaptation of zirconia restorations produced via them. The purpose of this in vitro study was to compare the effects of digital impression protocols on the marginal, axial, and occlusal adaptation of zirconia copings. Thirty extracted human maxillary premolar teeth without caries or defects were used. The teeth were prepared for zirconia crowns and randomly divided into 3 groups. Zirconia copings were designed at a thickness of 0.5 mm with 30 μm of simulated die spacer starting 1 mm from the margin of preparations. They were produced using computer-aided design-computer-aided manufacture (CAD-CAM) protocol with a conventional impression (group Cn) and 2 different production protocols with digital impressions (group C) and group Tr. The marginal, axial, and occlusal discrepancies of these copings were measured using the silicone replica technique with stereomicroscopy at ×50 magnification, and the data were analyzed with 1-way ANOVAs (α=.05). The mean marginal discrepancy values were 85.6 μm for group Cn, 58.7 μm for group C, and 47.7 μm for the Tr group. Significant differences were found among the production protocols in marginal, axial, and occlusal discrepancies (Pdigital impressions had significantly fewer marginal discrepancies than those of group Cn (P.05), and group Tr revealed the lowest axial discrepancy (P.05). The copings produced with the aid of digital impression systems exhibited better marginal and occlusal adaptation than those of the copings produced with the aid of conventional impression. Copyright © 2016 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

San Juan Islands, Washington Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) for select U.S. coastal regions. These integrated...

San Juan, Puerto Rico Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) for select U.S. coastal regions. These integrated...

U.S. Virgin Islands Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) for select U.S. coastal regions. These integrated...

Cape Hatteras, North Carolina Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) for select U.S. coastal regions. These integrated...

Sand Point, Alaska MHW Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) for select U.S. coastal regions. These integrated...

Port San Luis, California Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) for select U.S. coastal regions. These integrated...

Rarotonga 1 arc-second Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Centers for Environmental Information is building high-resolution digital elevation models (DEMs) for select U.S. coastal regions. These integrated...

Eastern Canada Digital Elevation Model - 3 arc-second

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Centers for Environmental Information is building high-resolution digital elevation models (DEMs) for select U.S. coastal regions. These integrated...

Central Oregon Coastal Digital Elevation Model NAVD 88

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) for select U.S. coastal regions. These integrated...

Atlantic City, New Jersey Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) for select U.S. coastal regions. These integrated...

Galapagos Islands, Ecuador 1 sec Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Centers for Environmental Information is building high-resolution digital elevation models (DEMs) for select U.S. coastal regions. These integrated...

Galapagos Islands, Ecuador 3 sec Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Centers for Environmental Information is building high-resolution digital elevation models (DEMs) for select U.S. coastal regions. These integrated...

Gradient based filtering of digital elevation models

DEFF Research Database (Denmark)

Knudsen, Thomas; Andersen, Rune Carbuhn

We present a filtering method for digital terrain models (DTMs). The method is based on mathematical morphological filtering within gradient (slope) defined domains. The intention with the filtering procedure is to improbé the cartographic quality of height contours generated from a DTM based...

[Reliability study in the measurement of the cusp inclination angle of a chairside digital model].

Science.gov (United States)

Xinggang, Liu; Xiaoxian, Chen

2018-02-01

This study aims to evaluate the reliability of the software Picpick in the measurement of the cusp inclination angle of a digital model. Twenty-one trimmed models were used as experimental objects. The chairside digital impression was then used for the acquisition of 3D digital models, and the software Picpick was employed for the measurement of the cusp inclination of these models. The measurements were repeated three times, and the results were compared with a gold standard, which was a manually measured experimental model cusp angle. The intraclass correlation coefficient (ICC) was calculated. The paired t test value of the two measurement methods was 0.91. The ICCs between the two measurement methods and three repeated measurements were greater than 0.9. The digital model achieved a smaller coefficient of variation (9.9%). The software Picpick is reliable in measuring the cusp inclination of a digital model.

What Is Digital Labour? What Is Digital Work? What’s their Difference? And Why Do These Questions Matter for Understanding Social Media?

Directory of Open Access Journals (Sweden)

Christian Fuchs

2013-06-01

Full Text Available This paper deals with the questions: What is digital labour? What is digital work? Based on Marx’s theory, we distinguish between work and labour as anthropological and historical forms of human activity. The notion of alienated labour is grounded in a general model of the work process that is conceptualized based on a dialectic of subject and object in the economy that we present in the form of a model, the Hegelian-Marxist dialectical triangle of the work process. Various aspects of a Marxist theory of work and labour, such as the notions of abstract and concrete labour, double-free labour, productive labour, the collective worker and general work are presented. Labour is based on a fourfold alienation of the human being. After these concepts are introduced, they are used for discussing the notions of digital labour and digital work. The presentation is on the one hand general and on the other hand uses Facebook as a concrete case for explaining how digital labour functions. Digital work is the organisation of human experiences with the help of the human brain, digital media and speech in such a way that new products are created. Digital labour is the valorisation dimension of digital work. We conclude that we require the transformation of digital labour into digital work, a true social media revolution that makes “social media” truly and fully social. We also argue why in our view work is not the same as labour by discussing the concept of playful work and pointing out limits of concepts such as antiwork, postwork and zerowork.

Proximal caries detection using digital subtraction radiography in the artificial caries activity model

Energy Technology Data Exchange (ETDEWEB)

Park, Jong Hoon; Lee, Gi Ja; Choi, Sam Jin; Park, Young Ho; Kim, Kyung Soo; Jin, Hyun Seok; Hong, Kyung Won; Oh, Berm Seok; Park, Hun Kuk [Department of Biomedical Engineering, School of Medicine, Kyung Hee University, Seoul (Korea, Republic of); Choi, Yong Suk; Hwang, Eui Hwan [Department of Oral and Maxillofacial Radiology, Institute of Oral Biology, School of Dentistry, Kyung Hee University, Seoul (Korea, Republic of)

2009-03-15

The purpose of the experiment was to evaluating the diagnostic ability of dental caries detection using digital subtraction in the artificial caries activity model. Digital radiographs of five teeth with 8 proximal surfaces were obtained by CCD sensor (Kodak RVG 6100 using a size no.2). The digital radiographic images and subtraction images from artificial proximal caries were examined and interpreted. In this study, we proposed novel caries detection method which could diagnose the dental proximal caries from single digital radiographic image. In artificial caries activity model, the range of lesional depth was 572-1,374 {mu}m and the range of lesional area was 36.95-138.52 mm{sup 2}. The lesional depth and the area were significantly increased with demineralization time (p<0.001). Furthermore, the proximal caries detection using digital subtraction radiography showed high detection rate compared to the proximal caries examination using simple digital radiograph. The results demonstrated that the digital subtraction radiography from single radiographic image of artificial caries was highly efficient in the detection of dental caries compared to the data from simple digital radiograph.

Proximal caries detection using digital subtraction radiography in the artificial caries activity model

International Nuclear Information System (INIS)

Park, Jong Hoon; Lee, Gi Ja; Choi, Sam Jin; Park, Young Ho; Kim, Kyung Soo; Jin, Hyun Seok; Hong, Kyung Won; Oh, Berm Seok; Park, Hun Kuk; Choi, Yong Suk; Hwang, Eui Hwan

2009-01-01

The purpose of the experiment was to evaluating the diagnostic ability of dental caries detection using digital subtraction in the artificial caries activity model. Digital radiographs of five teeth with 8 proximal surfaces were obtained by CCD sensor (Kodak RVG 6100 using a size no.2). The digital radiographic images and subtraction images from artificial proximal caries were examined and interpreted. In this study, we proposed novel caries detection method which could diagnose the dental proximal caries from single digital radiographic image. In artificial caries activity model, the range of lesional depth was 572-1,374 μm and the range of lesional area was 36.95-138.52 mm 2 . The lesional depth and the area were significantly increased with demineralization time (p<0.001). Furthermore, the proximal caries detection using digital subtraction radiography showed high detection rate compared to the proximal caries examination using simple digital radiograph. The results demonstrated that the digital subtraction radiography from single radiographic image of artificial caries was highly efficient in the detection of dental caries compared to the data from simple digital radiograph.

Minnesota Digital Elevation Model - Tiled 93 Meter Resolution

Data.gov (United States)

Minnesota Department of Natural Resources — Digital Elevation Model (DEM) at a resolution of 93 meters. Original data resolution was 3 arc seconds which corresponds (approximately) to a matrix of points at a...

User Decisions in a (Partly) Digital World

DEFF Research Database (Denmark)

Veitch, Rob; Constantiou, Ioanna

2012-01-01

of behaviour, resources and legal availability. We test the model for film and music using causal data of access-mode decisions collected from students at two Danish universities. Our findings indicate that the economic considerations of price perception and legal availability are the most consistent factors......Technologies enabling digital piracy have expanded the variety of options available to users when deciding how to access a product. As a result, access-mode decisions for film and music are broader than for other goods where the piracy option is not as prevalent. This paper presents a model...... of access-mode decisions for film and music which integrates elements of previous digital piracy models and expands upon them to reflect the decision’s complexity. We depict the access-mode decision as being influenced by the user’s product desire, price perceptions, perceived risks, internal regulators...

Mis/Representations in School-Based Digital Media Production: An Ethnographic Exploration with Muslim Girls

Science.gov (United States)

Dahya, Negin; Jenson, Jennifer

2015-01-01

In this article, the authors discuss findings from a digital media production club with racialized girls in a low-income school in Toronto, Ontario. Specifically, the authors consider how student-produced media is impacted by ongoing postcolonial structures relating to power and representation in the school and in the media production work of…

[Fabrication and accuracy research on 3D printing dental model based on cone beam computed tomography digital modeling].

Science.gov (United States)

Zhang, Hui-Rong; Yin, Le-Feng; Liu, Yan-Li; Yan, Li-Yi; Wang, Ning; Liu, Gang; An, Xiao-Li; Liu, Bin

2018-04-01

The aim of this study is to build a digital dental model with cone beam computed tomography (CBCT), to fabricate a virtual model via 3D printing, and to determine the accuracy of 3D printing dental model by comparing the result with a traditional dental cast. CBCT of orthodontic patients was obtained to build a digital dental model by using Mimics 10.01 and Geomagic studio software. The 3D virtual models were fabricated via fused deposition modeling technique (FDM). The 3D virtual models were compared with the traditional cast models by using a Vernier caliper. The measurements used for comparison included the width of each tooth, the length and width of the maxillary and mandibular arches, and the length of the posterior dental crest. 3D printing models had higher accuracy compared with the traditional cast models. The results of the paired t-test of all data showed that no statistically significant difference was observed between the two groups (P>0.05). Dental digital models built with CBCT realize the digital storage of patients' dental condition. The virtual dental model fabricated via 3D printing avoids traditional impression and simplifies the clinical examination process. The 3D printing dental models produced via FDM show a high degree of accuracy. Thus, these models are appropriate for clinical practice.

Digital Simulation in the Geosciences

Directory of Open Access Journals (Sweden)

Alexandr A. Lobanov

2014-09-01

Full Text Available This article provides an analysis of methods for digital modeling in the area of Earth Sciences. The author illustrates the difference between digital modeling in radio communication and that in the area of Earth Sciences. The article examines the integration aspect of digital models, demonstrates the advantages of digital over analog models, and illustrates that digital models are discrete. The author outlines the characteristics of digital modeling and illustrates the logical structure of digital models.

Digital maker-entrepreneurs in open design: What activities make up their business model?

NARCIS (Netherlands)

Dr. P. Troxler; Patricia Wolf

2017-01-01

The business models of digital maker-entrepreneurs in open design are inextricably linked to the broader open design community. Digital makers share designs on online platforms such as Thingiverse and use digital manufacturing technology such as 3-D printing as a generative mechanism for their

Accuracy of 3-dimensional curvilinear measurements on digital models with intraoral scanners.

Science.gov (United States)

Mack, Spencer; Bonilla, Tammy; English, Jeryl D; Cozad, Benjamin; Akyalcin, Sercan

2017-09-01

Our objectives were to evaluate and compare the digital dental models generated from 2 commercial intraoral scanners with manual measurements when performing 3-dimensional surface measurements along a curved line (curvilinear). Dry mandibles (n = 61) with intact dentition were used. The mandibles were digitized using 2 chair-side intraoral scanners: Cadent iTero (Align Technology, San Jose, Calif) and Lythos Digital Impression system (Ormco, Orange, Calif). Digitized 3-dimensional models were converted to individual stereolithography files and used with commercial software to obtain the curvilinear measurements. Manual measurements were carried out directly on the mandibular teeth. Measurements were made on different locations on the dental arch in various directions. One-sample t tests and linear regression analyses were performed. To further graphically examine the accuracy between the different methods, Bland-Altman plots were computed. The level of significance was set at P 0.05). Bland-Altman analysis showed no fixed bias of 1 approach vs the other, and random errors were detected in all comparisons. Although the mean biases of the digital models obtained by the iTero and Lythos scanners, when compared with direct caliper measurements, were low, the comparison of the 2 intraoral scanners yielded the lowest mean bias. No comparison displayed statistical significance for the t scores; this indicated the absence of proportional bias in these comparisons. The intraoral scanners tested in this study produced digital dental models that were comparatively accurate when performing direct surface measurements along a curved line in 3 dimensions. Copyright © 2017 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

Practical Measurement and Productive Persistence: Strategies for Using Digital Learning System Data to Drive Improvement

Science.gov (United States)

Krumm, Andrew E.; Beattie, Rachel; Takahashi, Sola; D'Angelo, Cynthia; Feng, Mingyu; Cheng, Britte

2016-01-01

This paper outlines the development of practical measures of productive persistence using digital learning system data. Practical measurement refers to data collection and analysis approaches originating from improvement science; productive persistence refers to the combination of academic and social mindsets as well as learning behaviours that…

Mobile Music, Sensors, Physical Modeling, and Digital Fabrication: Articulating the Augmented Mobile Instrument

Directory of Open Access Journals (Sweden)

Romain Michon

2017-12-01

Full Text Available Two concepts are presented, extended, and unified in this paper: mobile device augmentation towards musical instruments design and the concept of hybrid instruments. The first consists of using mobile devices at the heart of novel musical instruments. Smartphones and tablets are augmented with passive and active elements that can take part in the production of sound (e.g., resonators, exciter, etc., add new affordances to the device, or change its global aesthetics and shape. Hybrid instruments combine physical/acoustical and “physically informed” virtual/digital elements. Recent progress in physical modeling of musical instruments and digital fabrication is exploited to treat instrument parts in a multidimensional way, allowing any physical element to be substituted with a virtual one and vice versa (as long as it is physically possible. A wide range of tools to design mobile hybrid instruments is introduced and evaluated. Aesthetic and design considerations when making such instruments are also presented through a series of examples.

Digital Tourism on the Way to Digital Marketing Success

OpenAIRE

RATIU, Monica Paula; PURCAREA, Ioan Matei

2015-01-01

There is a real need of digital support of the tourist experience before, during and after the tourist activity, because digitization is steadily becoming the main pathway for consumer journeys. The digital revolution changed the way consumers shop for travel products and interact with brands. Tourism businesses need to utilize digital marketing techniques in their practices and to right track consumer activity across channels and devices. Getting vital information from customers via social m...

The commercial use of digital media to market alcohol products: a narrative review.

Science.gov (United States)

Lobstein, Tim; Landon, Jane; Thornton, Nicole; Jernigan, David

2017-01-01

The rising use of digital media in the last decade, including social networking media and downloadable applications, has created new opportunities for marketing a wide range of goods and services, including alcohol products. This paper aims to review the evidence in order to answer a series of policy-relevant questions: does alcohol marketing through digital media influence drinking behaviour or increases consumption; what methods of promotional marketing are used, and to what extent; and what is the evidence of marketing code violations and especially of marketing to children? A search of scientific, medical and social journals and authoritative grey literature identified 47 relevant papers (including 14 grey literature documents). The evidence indicated (i) that exposure to marketing through digital media was associated with higher levels of drinking behaviour; (ii) that the marketing activities make use of materials and approaches that are attractive to young people and encourage interactive engagement with branded messaging; and (iii) there is evidence that current alcohol marketing codes are being undermined by alcohol producers using digital media. There is evidence to support public health interventions to restrict the commercial promotion of alcohol in digital media, especially measures to protect children and youth. © 2016 Society for the Study of Addiction.

Simple method of modelling of digital holograms registering and their optical reconstruction

International Nuclear Information System (INIS)

Evtikhiev, N N; Cheremkhin, P A; Krasnov, V V; Kurbatova, E A; Molodtsov, D Yu; Porshneva, L A; Rodin, V G

2016-01-01

The technique of modeling of digital hologram recording and image optical reconstruction from these holograms is described. The method takes into account characteristics of the object, digital camera's photosensor and spatial light modulator used for digital holograms displaying. Using the technique, equipment can be chosen for experiments for obtaining good reconstruction quality and/or holograms diffraction efficiency. Numerical experiments were conducted. (paper)

A review of product integration in digital games and why neuromarketing may be of value in future research

OpenAIRE

Lees, Malcom

2015-01-01

The purpose of this study was to review product integration in digital games and recognize the benefits of the promotional channel. Another aim was to analyze previous research and identify gaps in general knowledge. Finally the concept of neuromarketing was examined as a potential modern research method for future research in the area of product integration in digital games. A qualitative method was applied. The study examined secondary data collected from sources that include: scholarl...

User Modelling Validation over the Security Awareness of Digital Natives

Directory of Open Access Journals (Sweden)

Vasileios Gkioulos

2017-07-01

Full Text Available Young generations make extensive use of mobile devices, such as smart-phones, tablets and laptops, for a variety of daily tasks with potentially critical impact, while the number of security breaches via portable devices increases exponentially. A plethora of security risks associated with these devices are induced by design shortcomings and vulnerabilities related to user behavior. Therefore, deploying suitable risk treatments requires the investigation of how security experts perceive the digital natives (young people, born in the digital era, when utilizing their user behavior models in the design and analysis of related systems. In this article, we present the results of a survey performed across a multinational sample of security professionals, in comparison to our earlier study over the security awareness of digital natives. Through this study, we seek to identify divergences between user behavior and the conceptual user-models that security experts utilise in their professional tasks. Our results indicate that the experts understanding over the user behaviour does not follow a solidified user-model, while influences from personal perceptions and randomness are also noticeable.

Advancing Models and Theories for Digital Behavior Change Interventions.

Science.gov (United States)

Hekler, Eric B; Michie, Susan; Pavel, Misha; Rivera, Daniel E; Collins, Linda M; Jimison, Holly B; Garnett, Claire; Parral, Skye; Spruijt-Metz, Donna

2016-11-01

To be suitable for informing digital behavior change interventions, theories and models of behavior change need to capture individual variation and changes over time. The aim of this paper is to provide recommendations for development of models and theories that are informed by, and can inform, digital behavior change interventions based on discussions by international experts, including behavioral, computer, and health scientists and engineers. The proposed framework stipulates the use of a state-space representation to define when, where, for whom, and in what state for that person, an intervention will produce a targeted effect. The "state" is that of the individual based on multiple variables that define the "space" when a mechanism of action may produce the effect. A state-space representation can be used to help guide theorizing and identify crossdisciplinary methodologic strategies for improving measurement, experimental design, and analysis that can feasibly match the complexity of real-world behavior change via digital behavior change interventions. Copyright © 2016 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.

An ethical assessment model for digital disease detection technologies.

Science.gov (United States)

Denecke, Kerstin

2017-09-20

Digital epidemiology, also referred to as digital disease detection (DDD), successfully provided methods and strategies for using information technology to support infectious disease monitoring and surveillance or understand attitudes and concerns about infectious diseases. However, Internet-based research and social media usage in epidemiology and healthcare pose new technical, functional and formal challenges. The focus of this paper is on the ethical issues to be considered when integrating digital epidemiology with existing practices. Taking existing ethical guidelines and the results from the EU project M-Eco and SORMAS as starting point, we develop an ethical assessment model aiming at providing support in identifying relevant ethical concerns in future DDD projects. The assessment model has four dimensions: user, application area, data source and methodology. The model supports in becoming aware, identifying and describing the ethical dimensions of DDD technology or use case and in identifying the ethical issues on the technology use from different perspectives. It can be applied in an interdisciplinary meeting to collect different viewpoints on a DDD system even before the implementation starts and aims at triggering discussions and finding solutions for risks that might not be acceptable even in the development phase. From the answers, ethical issues concerning confidence, privacy, data and patient security or justice may be judged and weighted.

A guide for the use of digital elevation model data for making soil surveys

Science.gov (United States)

Klingebiel, A.A.; Horvath, Emil H.; Reybold, William U.; Moore, D.G.; Fosnight, E.A.; Loveland, Thomas R.

1988-01-01

The intent of this publication is twofold: (1) to serve as a user guide for soil scientists and others interested in learning about the value and use of digital elevation model (DEM) data in making soil surveys and (2) to provide documentation of the Soil Landscape Analysis Project (SLAP). This publication provides a step-by-step guide on how digital slope-class maps are adjusted to topographic maps and orthophotoquads to obtain accurate slope-class maps, and how these derivative maps can be used as a base for soil survey premaps. In addition, guidance is given on the use of aspect-class maps and other resource data in making pre-maps. The value and use of tabular summaries are discussed. Examples of the use of DEM products by the authors and by selected field soil scientists are also given. Additional information on SLAP procedures may be obtained from USDA, Soil Conservation Service, Soil Survey Division, P.O. Box 2890, Washington, D.C. 20013, and from references (Horvath and others, 1987; Horvath and others, 1983; Klingebiel and others, 1987; and Young, 1987) listed in this publication. The slope and aspect products and the procedures for using these products have evolved during 5 years of cooperative research with the USDA, Soil Conservation Service and Forest Service, and the USDI, Bureau of Land Management.

Digital elevation modeling via curvature interpolation for lidar data

Science.gov (United States)

Digital elevation model (DEM) is a three-dimensional (3D) representation of a terrain's surface - for a planet (including Earth), moon, or asteroid - created from point cloud data which measure terrain elevation. Its modeling requires surface reconstruction for the scattered data, which is an ill-p...

Fisheye image rectification using spherical and digital distortion models

Science.gov (United States)

Li, Xin; Pi, Yingdong; Jia, Yanling; Yang, Yuhui; Chen, Zhiyong; Hou, Wenguang

2018-02-01

Fisheye cameras have been widely used in many applications including close range visual navigation and observation and cyber city reconstruction because its field of view is much larger than that of a common pinhole camera. This means that a fisheye camera can capture more information than a pinhole camera in the same scenario. However, the fisheye image contains serious distortion, which may cause trouble for human observers in recognizing the objects within. Therefore, in most practical applications, the fisheye image should be rectified to a pinhole perspective projection image to conform to human cognitive habits. The traditional mathematical model-based methods cannot effectively remove the distortion, but the digital distortion model can reduce the image resolution to some extent. Considering these defects, this paper proposes a new method that combines the physical spherical model and the digital distortion model. The distortion of fisheye images can be effectively removed according to the proposed approach. Many experiments validate its feasibility and effectiveness.

Building the digital enterprise a guide to constructing monetization models using digital technologies

CERN Document Server

Skilton, Mark

2016-01-01

The digital economy is at a tipping point. This practical book defines digital ecosystems, discusses digital design using converging technologies of social networking, mobility, big data and cloud computing, and provides a methods for linking digital technologies together to meet the challenges of building a digital enterprise in the new economy.

Radarsat Antarctic Mapping Project Digital Elevation Model, Version 2

Data.gov (United States)

National Aeronautics and Space Administration — The high-resolution Radarsat Antarctic Mapping Project (RAMP) Digital Elevation Model (DEM) combines topographic data from a variety of sources to provide consistent...

Automation of extrusion of porous cable products based on a digital controller

Science.gov (United States)

Chostkovskii, B. K.; Mitroshin, V. N.

2017-07-01

This paper presents a new approach to designing an automated system for monitoring and controlling the process of applying porous insulation material on a conductive cable core, which is based on using structurally and parametrically optimized digital controllers of an arbitrary order instead of calculating typical PID controllers using known methods. The digital controller is clocked by signals from the clock length sensor of a measuring wheel, instead of a timer signal, and this provides the robust properties of the system with respect to the changing insulation speed. Digital controller parameters are tuned to provide the operating parameters of the manufactured cable using a simulation model of stochastic extrusion and are minimized by moving a regular simplex in the parameter space of the tuned controller.

An evaluation of onshore digital elevation models for tsunami inundation modelling

Science.gov (United States)

Griffin, J.; Latief, H.; Kongko, W.; Harig, S.; Horspool, N.; Hanung, R.; Rojali, A.; Maher, N.; Fountain, L.; Fuchs, A.; Hossen, J.; Upi, S.; Dewanto, S. E.; Cummins, P. R.

2012-12-01

Tsunami inundation models provide fundamental information about coastal areas that may be inundated in the event of a tsunami along with additional parameters such as flow depth and velocity. This can inform disaster management activities including evacuation planning, impact and risk assessment and coastal engineering. A fundamental input to tsunami inundation models is adigital elevation model (DEM). Onshore DEMs vary widely in resolution, accuracy, availability and cost. A proper assessment of how the accuracy and resolution of DEMs translates into uncertainties in modelled inundation is needed to ensure results are appropriately interpreted and used. This assessment can in turn informdata acquisition strategies depending on the purpose of the inundation model. For example, lower accuracy elevation data may give inundation results that are sufficiently accurate to plan a community's evacuation route but not sufficient to inform engineering of a vertical evacuation shelters. A sensitivity study is undertaken to assess the utility of different available onshore digital elevation models for tsunami inundation modelling. We compare airborne interferometric synthetic aperture radar (IFSAR), ASTER and SRTM against high resolution (historical tsunami run-up data. Large vertical errors (> 10 m) and poor resolution of the coastline in the ASTER and SRTM elevation models cause modelled inundation to be much less compared with models using better data and with observations. Therefore we recommend that ASTER and SRTM should not be used for modelling tsunami inundation in order to determine tsunami extent or any other measure of onshore tsunami hazard. We suggest that for certain disaster management applications where the important factor is the extent of inundation, such as evacuation planning, airborne IFSAR provides a good compromise between cost and accuracy; however the representation of flow parameters such as depth and velocity is not sufficient to inform detailed

The Profile of the Development of Digital Products in 2004%2004年数码产品发展状况扫描

Institute of Scientific and Technical Information of China (English)

罗李陈

2005-01-01

The market of digital products in 2004 is a kaleidoscopic one that the new products came in pell-mell. In addition, the price competition had entered the battlefield that it was too complicated for us to estimate. In the paper, the author will start to discuss and illustrate the digital appliance market in 2004 from AV products,telecommunication,IT products and home appliance up to 4 aspects.

RADIOMETRIC BLOCK ADJUSMENT AND DIGITAL RADIOMETRIC MODEL GENERATION

Directory of Open Access Journals (Sweden)

A. Pros

2013-05-01

Full Text Available In this paper we present a radiometric block adjustment method that is related to geometric block adjustment and to the concept of a terrain Digital Radiometric Model (DRM as a complement to the terrain digital elevation and surface models. A DRM, in our concept, is a function that for each ground point returns a reflectance value and a Bidirectional Reflectance Distribution Function (BRDF. In a similar way to the terrain geometric reconstruction procedure, given an image block of some terrain area, we split the DRM generation in two phases: radiometric block adjustment and DRM generation. In the paper we concentrate on the radiometric block adjustment step, but we also describe a preliminary DRM generator. In the block adjustment step, after a radiometric pre-calibraton step, local atmosphere radiative transfer parameters, and ground reflectances and BRDFs at the radiometric tie points are estimated. This radiometric block adjustment is based on atmospheric radiative transfer (ART models, pre-selected BRDF models and radiometric ground control points. The proposed concept is implemented and applied in an experimental campaign, and the obtained results are presented. The DRM and orthophoto mosaics are generated showing no radiometric differences at the seam lines.

[Research progress of three-dimensional digital model for repair and reconstruction of knee joint].

Science.gov (United States)

Tong, Lu; Li, Yanlin; Hu, Meng

2013-01-01

To review recent advance in the application and research of three-dimensional digital knee model. The recent original articles about three-dimensional digital knee model were extensively reviewed and analyzed. The digital three-dimensional knee model can simulate the knee complex anatomical structure very well. Based on this, there are some developments of new software and techniques, and good clinical results are achieved. With the development of computer techniques and software, the knee repair and reconstruction procedure has been improved, the operation will be more simple and its accuracy will be further improved.

EARTHWORK VOLUME CALCULATION FROM DIGITAL TERRAIN MODELS

Directory of Open Access Journals (Sweden)

JANIĆ Milorad

2015-06-01

Full Text Available Accurate calculation of cut and fill volume has an essential importance in many fields. This article shows a new method, which has no approximation, based on Digital Terrain Models. A relatively new mathematical model is developed for that purpose, which is implemented in the software solution. Both of them has been tested and verified in the praxis on several large opencast mines. This application is developed in AutoLISP programming language and works in AutoCAD environment.

A Computer-Assisted Learning Model Based on the Digital Game Exponential Reward System

Science.gov (United States)

Moon, Man-Ki; Jahng, Surng-Gahb; Kim, Tae-Yong

2011-01-01

The aim of this research was to construct a motivational model which would stimulate voluntary and proactive learning using digital game methods offering players more freedom and control. The theoretical framework of this research lays the foundation for a pedagogical learning model based on digital games. We analyzed the game reward system, which…

Comparison of dimensional accuracy of digital dental models produced from scanned impressions and scanned stone casts

Science.gov (United States)

Subeihi, Haitham

Introduction: Digital models of dental arches play a more and more important role in dentistry. A digital dental model can be generated by directly scanning intraoral structures, by scanning a conventional impression of oral structures or by scanning a stone cast poured from the conventional impression. An accurate digital scan model is a fundamental part for the fabrication of dental restorations. Aims: 1. To compare the dimensional accuracy of digital dental models produced by scanning of impressions versus scanning of stone casts. 2. To compare the dimensional accuracy of digital dental models produced by scanning of impressions made of three different materials (polyvinyl siloxane, polyether or vinyl polyether silicone). Methods and Materials: This laboratory study included taking addition silicone, polyether and vinyl polyether silicone impressions from an epoxy reference model that was created from an original typodont. Teeth number 28 and 30 on the typodont with a missing tooth number 29 were prepared for a metal-ceramic three-unit fixed dental prosthesis with tooth #29 being a pontic. After tooth preparation, an epoxy resin reference model was fabricated by duplicating the typodont quadrant that included the tooth preparations. From this reference model 12 polyvinyl siloxane impressions, 12 polyether impressions and 12 vinyl polyether silicone impressions were made. All 36 impressions were scanned before pouring them with dental stone. The 36 dental stone casts were, in turn, scanned to produce digital models. A reference digital model was made by scanning the reference model. Six groups of digital models were produced. Three groups were made by scanning of the impressions obtained with the three different materials, the other three groups involved the scanning of the dental casts that resulted from pouring the impressions made with the three different materials. Groups of digital models were compared using Root Mean Squares (RMS) in terms of their

Modeling a National Collaborative Digital Library for Malaysian Secondary Schools

Directory of Open Access Journals (Sweden)

N.N. Edzan

2004-09-01

Full Text Available This paper describes the conceptualisation of a model for a collaborative digital library specially tailored for Malaysian secondary schools, which will support classroom teaching and learning. The move towards collaboratively building the contents of a digital library is a fairly recent trend and it simulates an environment where partners are empowered to participate in building and up keeping the knowledge contents of the system. The conceptualisation of a Malaysian digital library is in line with the governments efforts in establishing SMART schools. However, various issues such as identifying local resources, ascertaining the needs of it users, and establishing a framework to meet these needs, must be addressed before the digital library can be fully implemented. It may be approached through the establishment of test beds in a particular learning institution, before nationwide implementation.

Easter Island, Chile Digital Elevation Model 3 arc-second

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Centers for Environmental Information is building high-resolution digital elevation models (DEMs) for select U.S. coastal regions. These integrated...

Prefabricated Construction using Digitally Integrated Industrial Manufacturing

Directory of Open Access Journals (Sweden)

Harry Giles

2012-10-01

Full Text Available The paper describes research being carried out in relation to prefabricated high density affordablehousing under a grant from the Partnership for the Advancement of Technology in Housing(PATH and the National Science Foundation (NSF in the USA. The objective is to demonstratehow a new paradigm for the conceptualization and construction of buildings can be conceivedof as an entirely factory based process that creates advantages for construction through industrialsystems technology transfer. Our approach is intended to transform design methodologythrough demonstrating how alternative construction concepts, using entirely pre-manufacturedvolumetric units, can be adopted. This involves digital modeling that facilitates parametric variationsfor creating customized prefabricated products from design conceptualization through tofinal product delivery. The paper discusses key areas under investigation in relation to a manufacturingparadigm used in the automotive industry that integrates virtual prototyping and industrialmanufacturing systems. Our research explores a type of monocoque volumetric unit prefabricatedin steel, which will be pre-finished as part of a modular factory-built approach usingindustrialized methodologies that will facilitate customized manufacture of a high quality energyefficient product for affordable housing.The paper addresses the automotive industry methods of manufacture that have served increasedautomobile performance and economics through mass production for over a century. In starkcontrast, the building industry and in particular the housing industry is still a century behind. It issuggested that a move away from tradition will require an industry wide initiative, just like HenryFord led the way with mass production. By embracing the increasing sophistication and capabilitythat digital technology offers, it is shown how digital tools are implemented towards masscustomization in house design using virtual modeling in the

Reliability modeling of digital RPS with consideration of undetected software faults

Energy Technology Data Exchange (ETDEWEB)

Khalaquzzaman, M.; Lee, Seung Jun; Jung, Won Dea [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); Kim, Man Cheol [Chung Ang Univ., Seoul (Korea, Republic of)

2013-10-15

This paper provides overview of different software reliability methodologies and proposes a technic for estimating the reliability of RPS with consideration of undetected software faults. Software reliability analysis of safety critical software has been challenging despite spending a huge effort for developing large number of software reliability models, and no consensus yet to attain on an appropriate modeling methodology. However, it is realized that the combined application of BBN based SDLC fault prediction method and random black-box testing of software would provide better ground for reliability estimation of safety critical software. Digitalizing the reactor protection system of nuclear power plant has been initiated several decades ago and now full digitalization has been adopted in the new generation of NPPs around the world because digital I and C systems have many better technical features like easier configurability and maintainability over analog I and C systems. Digital I and C systems are also drift-free and incorporation of new features is much easier. Rules and regulation for safe operation of NPPs are established and has been being practiced by the operators as well as regulators of NPPs to ensure safety. The failure mechanism of hardware and analog systems well understood and the risk analysis methods for these components and systems are well established. However, digitalization of I and C system in NPP introduces some crisis and uncertainty in reliability analysis methods of the digital systems/components because software failure mechanisms are still unclear.

The virtual maintenance system: a computer-based support tool for robust design, product monitoring, fault diagnosis and maintenance planning

NARCIS (Netherlands)

van Houten, Frederikus J.A.M.; Kimura, F.

2000-01-01

Digital (geometric) product models can be used for maintainability analysis and maintenance planning. It is not feasible to build digital product models for maintenance purposes only, but if a digital product model is available, it may be used to support many maintenance-related engineering tasks.

Chignik, Alaska 1 arc-second Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) to support individual coastal States as part of the...

Akutan, Alaska 8 Arc-second Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) to support individual coastal States as part of the...

Evaluation of Digital Model Accuracy and Time-dependent ...

African Journals Online (AJOL)

2017-10-26

Oct 26, 2017 ... stability of alginate impressions for durations of immediately (T0), 1 day (T1), and 2 days (T2). ... 3D digital models were introduced in 1999 by OrthoCad, ..... printer either within or on the outside surface of the teeth.[18].

Exploring education for digital librarians meaning, modes and models

CERN Document Server

Myburgh, Sue

2013-01-01

Exploring Education for Digital Librarians provides a refreshing perspective on the discipline and profession of Library and Information Science (LIS), with a focus on preparing students for careers as librarians who can deal with present and future digital information environments. A re-examination of the knowledge base of the field, combined with a proposed theoretical structure for LIS, provide the basis for this work, which also examines competencies for practice as well as some of the international changes in the nature of higher education. The authors finally suggest a model that could b

Strengthening Inclusion of Learners With Attention Difficulties Through Interventions With Digital Technology In Processes of Production

DEFF Research Database (Denmark)

Sorensen, Elsebeth Korsgaard; Voldborg, Hanne

2017-01-01

This paper investigates the potential of digital technologies for strengthening the participation and inclusion of learners with developmental and attention deficits (focus learners) into the mainstream classroom. The paper describes the authors’ approach to the challenge of researching the extent......, to which digital technologies may support the learning process of focus learners – in particular in those aspects of the learning process that deal with the construction of learning products and the communication and dissemination of knowledge to peers, teachers or others. On the basis of the actual...... analysis and a succeeding discussion, the paper concludes that in order to create ownership, pedagogic strategies and interventions with digital technologies (whether viewed from the perspective of teaching or the perspective of learning) should incorporate opportunities for developing digital multimodal...

Comparison of piping models for digital power plant simulators

International Nuclear Information System (INIS)

Sowers, G.W.

1979-08-01

Two piping models intended for use in a digital power plant simulator are compared. One is a finite difference approximation to the partial differential equation called PIPE, and the other is a function subroutine that acts as a delay operator called PDELAY. The two models are compared with respect to accuracy and execution time. In addition, the stability of the PIPE model is determined. The PDELAY model is found to execute faster than the PIPE model with comparable accuracy

Mobile, Alabama 1/3 MHW Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) for select U.S. coastal regions in the Gulf of Mexico....

Direct digital conversion detector technology

Science.gov (United States)

Mandl, William J.; Fedors, Richard

1995-06-01

Future imaging sensors for the aerospace and commercial video markets will depend on low cost, high speed analog-to-digital (A/D) conversion to efficiently process optical detector signals. Current A/D methods place a heavy burden on system resources, increase noise, and limit the throughput. This paper describes a unique method for incorporating A/D conversion right on the focal plane array. This concept is based on Sigma-Delta sampling, and makes optimum use of the active detector real estate. Combined with modern digital signal processors, such devices will significantly increase data rates off the focal plane. Early conversion to digital format will also decrease the signal susceptibility to noise, lowering the communications bit error rate. Computer modeling of this concept is described, along with results from several simulation runs. A potential application for direct digital conversion is also reviewed. Future uses for this technology could range from scientific instruments to remote sensors, telecommunications gear, medical diagnostic tools, and consumer products.

Comparison of digital elevation models for aquatic data development.

Science.gov (United States)

Sharon Clarke; Kelly. Burnett

2003-01-01

Thirty-meter digital elevation models (DEMs) produced by the U.S. Geological Survey (USGS) are widely available and commonly used in analyzing aquatic systems. However, these DEMs are of relatively coarse resolution, were inconsistently produced (i.e., Level 1 versus Level 2 DEMs), and lack drainage enforcement. Such issues may hamper efforts to accurately model...

Applying and extending ISO/TC42 digital camera resolution standards to mobile imaging products

Science.gov (United States)

Williams, Don; Burns, Peter D.

2007-01-01

There are no fundamental differences between today's mobile telephone cameras and consumer digital still cameras that suggest many existing ISO imaging performance standards do not apply. To the extent that they have lenses, color filter arrays, detectors, apertures, image processing, and are hand held, there really are no operational or architectural differences. Despite this, there are currently differences in the levels of imaging performance. These are driven by physical and economic constraints, and image-capture conditions. Several ISO standards for resolution, well established for digital consumer digital cameras, require care when applied to the current generation of cell phone cameras. In particular, accommodation of optical flare, shading non-uniformity and distortion are recommended. We offer proposals for the application of existing ISO imaging resolution performance standards to mobile imaging products, and suggestions for extending performance standards to the characteristic behavior of camera phones.

Digitally-Driven Architecture

Directory of Open Access Journals (Sweden)

Henriette Bier

2014-07-01

Full Text Available The shift from mechanical to digital forces architects to reposition themselves: Architects generate digital information, which can be used not only in designing and fabricating building components but also in embedding behaviours into buildings. This implies that, similar to the way that industrial design and fabrication with its concepts of standardisation and serial production influenced modernist architecture, digital design and fabrication influences contemporary architecture. While standardisation focused on processes of rationalisation of form, mass-customisation as a new paradigm that replaces mass-production, addresses non-standard, complex, and flexible designs. Furthermore, knowledge about the designed object can be encoded in digital data pertaining not just to the geometry of a design but also to its physical or other behaviours within an environment. Digitally-driven architecture implies, therefore, not only digitally-designed and fabricated architecture, it also implies architecture – built form – that can be controlled, actuated, and animated by digital means.In this context, this sixth Footprint issue examines the influence of digital means as pragmatic and conceptual instruments for actuating architecture. The focus is not so much on computer-based systems for the development of architectural designs, but on architecture incorporating digital control, sens­ing, actuating, or other mechanisms that enable buildings to inter­act with their users and surroundings in real time in the real world through physical or sensory change and variation.

Digital TV, advertising and audience

Directory of Open Access Journals (Sweden)

Ângelo Cruz

2011-04-01

Full Text Available This article aims to analyze the advertisingsegment and their relationship with the development process of the digital television. We intent to observe the new perspectives of production and consumption of media. Among other things, that involves the issues of interactivity, the exhaustion of the traditional media models, and the relationship of the new media with the audience, considering the analysis of the tripod: digital television, advertising and audience. In Brazil, with the implementation of the Brazilian System of Digital Television (SBTVD, the problem takes bigger proportions, as a consequence of the possibility to issue and track down the digital content consumed. That happens as a consequence of the consumer ability to watch the program withor without the commercial break. At the current model of television, the public is the legitimizing factor: the broadcasters issues the public a ention asan instrument to obtain pecuniary rewarding of theadvertisers. That model constitutes itself as the main funding source of the channels and networks. On the one hand, digital television represents an advantage at the quality of picture and audio, multiplying the capacity to transmit television signals and to transport new features and services. On the other hand, it seems impossible to transform this industry without some reaction. The many interests involved constitute the main cause of that scenario: the agents interested in advertising are those concerned with the role of ideology, the support of capitalism and the industrial culture. Considering all these questions, it seems almost impossible to produce deep chances,contrary to the interests involved.

Digital disruption of the banking industry: Threat or opportunity?

Directory of Open Access Journals (Sweden)

Krstić Nataša

2016-01-01

Full Text Available If the previous decade in the banking business was marked by excessive credit expansion, today we are talking about a decade of its digital transformation. Under the influence of digital media and tremendous changes in technology and consumer needs, banks are exposed to digital disruption of their business models both from the inside and outside, which all leads to innovations in products, services, sales and distribution channels, business models and ultimately organizational culture. Sector analyses are showing that future profits will be redirected towards those financial organizations which successfully deploy digital technologies for process automation and as analytical tools, create new services and values for their clients who want their bank to be accessible at all places and all times, and which transform their organizational culture to an agile and innovation-oriented one. Successful banking strategies will be based on understanding how digital business transformation can create new value - on market changes brought by fin-tech innovators, on comprehensive understanding of customer habits and expectations, and setting up investments into digital business as the key priority.

Digital Ethics/Going Digital.

Science.gov (United States)

Wilson, Bradley

1996-01-01

Finds that the recent National Press Photographers Association code of ethics can serve as a model for any photography staff. Discusses how digital imaging is becoming commonplace in classrooms, due to decreasing costs and easier software. Explains digital terminology. Concludes that time saved in the darkroom and at the printer is now spent on…

Digital piracy management in creative content industry

OpenAIRE

Akulavičius, Marius

2015-01-01

The present habits of digital content consumption and a rather easy access to illegal creative content reduce the opportunities to limit digital piracy by banning or invoking legislation. such a context of the creative content industry results in the need to search for new business models that would encourage users to voluntarily switch from illegal to legal products of the creative content industry, rather than simply banning them from using the illegal ones. iIn order to determine which bus...

Intra-observer reliability and agreement of manual and digital orthodontic model analysis.

Science.gov (United States)

Koretsi, Vasiliki; Tingelhoff, Linda; Proff, Peter; Kirschneck, Christian

2018-01-23

Digital orthodontic model analysis is gaining acceptance in orthodontics, but its reliability is dependent on the digitalisation hardware and software used. We thus investigated intra-observer reliability and agreement / conformity of a particular digital model analysis work-flow in relation to traditional manual plaster model analysis. Forty-eight plaster casts of the upper/lower dentition were collected. Virtual models were obtained with orthoX®scan (Dentaurum) and analysed with ivoris®analyze3D (Computer konkret). Manual model analyses were done with a dial caliper (0.1 mm). Common parameters were measured on each plaster cast and its virtual counterpart five times each by an experienced observer. We assessed intra-observer reliability within method (ICC), agreement/conformity between methods (Bland-Altman analyses and Lin's concordance correlation), and changing bias (regression analyses). Intra-observer reliability was substantial within each method (ICC ≥ 0.7), except for five manual outcomes (12.8 per cent). Bias between methods was statistically significant, but less than 0.5 mm for 87.2 per cent of the outcomes. In general, larger tooth sizes were measured digitally. Total difference maxilla and mandible had wide limits of agreement (-3.25/6.15 and -2.31/4.57 mm), but bias between methods was mostly smaller than intra-observer variation within each method with substantial conformity of manual and digital measurements in general. No changing bias was detected. Although both work-flows were reliable, the investigated digital work-flow proved to be more reliable and yielded on average larger tooth sizes. Averaged differences between methods were within 0.5 mm for directly measured outcomes but wide ranges are expected for some computed space parameters due to cumulative error. © The Author 2017. Published by Oxford University Press on behalf of the European Orthodontic Society. All rights reserved. For permissions, please email: journals.permissions@oup.com

Digital hardware implementation of a stochastic two-dimensional neuron model.

Science.gov (United States)

Grassia, F; Kohno, T; Levi, T

2016-11-01

This study explores the feasibility of stochastic neuron simulation in digital systems (FPGA), which realizes an implementation of a two-dimensional neuron model. The stochasticity is added by a source of current noise in the silicon neuron using an Ornstein-Uhlenbeck process. This approach uses digital computation to emulate individual neuron behavior using fixed point arithmetic operation. The neuron model's computations are performed in arithmetic pipelines. It was designed in VHDL language and simulated prior to mapping in the FPGA. The experimental results confirmed the validity of the developed stochastic FPGA implementation, which makes the implementation of the silicon neuron more biologically plausible for future hybrid experiments. Copyright © 2017 Elsevier Ltd. All rights reserved.

Digital fabrication of multi-material biomedical objects

Energy Technology Data Exchange (ETDEWEB)

Cheung, H H; Choi, S H, E-mail: shchoi@hku.h [Department of Industrial and Manufacturing Systems Engineering, University of Hong Kong, Pokfulam Road (Hong Kong)

2009-12-15

This paper describes a multi-material virtual prototyping (MMVP) system for modelling and digital fabrication of discrete and functionally graded multi-material objects for biomedical applications. The MMVP system consists of a DMMVP module, an FGMVP module and a virtual reality (VR) simulation module. The DMMVP module is used to model discrete multi-material (DMM) objects, while the FGMVP module is for functionally graded multi-material (FGM) objects. The VR simulation module integrates these two modules to perform digital fabrication of multi-material objects, which can be subsequently visualized and analysed in a virtual environment to optimize MMLM processes for fabrication of product prototypes. Using the MMVP system, two biomedical objects, including a DMM human spine and an FGM intervertebral disc spacer are modelled and digitally fabricated for visualization and analysis in a VR environment. These studies show that the MMVP system is a practical tool for modelling, visualization, and subsequent fabrication of biomedical objects of discrete and functionally graded multi-materials for biomedical applications. The system may be adapted to control MMLM machines with appropriate hardware for physical fabrication of biomedical objects.

Digital fabrication of multi-material biomedical objects

International Nuclear Information System (INIS)

Cheung, H H; Choi, S H

2009-01-01

This paper describes a multi-material virtual prototyping (MMVP) system for modelling and digital fabrication of discrete and functionally graded multi-material objects for biomedical applications. The MMVP system consists of a DMMVP module, an FGMVP module and a virtual reality (VR) simulation module. The DMMVP module is used to model discrete multi-material (DMM) objects, while the FGMVP module is for functionally graded multi-material (FGM) objects. The VR simulation module integrates these two modules to perform digital fabrication of multi-material objects, which can be subsequently visualized and analysed in a virtual environment to optimize MMLM processes for fabrication of product prototypes. Using the MMVP system, two biomedical objects, including a DMM human spine and an FGM intervertebral disc spacer are modelled and digitally fabricated for visualization and analysis in a VR environment. These studies show that the MMVP system is a practical tool for modelling, visualization, and subsequent fabrication of biomedical objects of discrete and functionally graded multi-materials for biomedical applications. The system may be adapted to control MMLM machines with appropriate hardware for physical fabrication of biomedical objects.

Digital Signage

OpenAIRE

Fischer, Karl Peter

2011-01-01

Digital Signage for in-store advertising at gas stations/retail stores in Germany: A field study Digital Signage networks provide a novel means of advertising with the advantage of easily changeable and highly customizable animated content. Despite the potential and increasing use of these media empirical research is scarce. In a field study at 8 gas stations (with integrated convenience stores) we studied the effect of digital signage advertising on sales for different products and servi...

Digital terrain data base - new possibilities of 3D terrain modeling

Directory of Open Access Journals (Sweden)

Mateja Rihtaršič

1992-12-01

Full Text Available GISs has brought new dimensions in the field of digital terrain modelling, too. Modem DTMs must be real (relational databases with high degree of "intelligence". This paper presents some of the demands, ivhich have to be solved in modern digital terrain databases, together with main steps of their's generation. Problems, connected to regional level, multi-pur pose use, new possibilities and direct integration into GIS are presented. The practical model was created across smaller test area, so few lines with practical experiences can be droped, too.

Supporting SME Collecting Organisations: A Business Model Framework for Digital Heritage Collections

Directory of Open Access Journals (Sweden)

Darren Peacock

2009-08-01

Full Text Available Increasing numbers of heritage collecting organisations such as archives, galleries, libraries and museums are moving towards the provision of digital content and services based on the collections they hold. The collections sector in Australia is characterised by a diverse range of often very small organisations, many of which are struggling with the transition to digital service delivery. One major reason for this struggle is the lack of suitable underlying business models for these organisations as they attempt to achieve a sustainable digital presence. The diverse characteristics of organisations within the collections sector make it difficult, if not impossible, to identify a single business model suitable for all organisations. We argue in this paper that the development of a flexible e-business model framework is a more useful strategy for achieving this goal. This paper presents a preliminary framework based on the literature, utilising the Core + Complement (C+ Business Model Framework for Content Providers initially developed by Krueger et al. (2003 and outlines how the framework will be refined and investigated empirically in future research within the Australian collections sector.

Acoustic emissions of digital data video projectors- Investigating noise sources and their change during product aging

Science.gov (United States)

White, Michael Shane

2005-09-01

Acoustic emission testing continues to be a growing part of IT and telecommunication product design, as product noise is increasingly becoming a differentiator in the marketplace. This is especially true for digital/video display companies, such as InFocus Corporation, considering the market shift of these products to the home entertainment consumer as retail prices drop and performance factors increase. Projectors and displays using Digital Light Processing(tm) [DLP(tm)] technology incorporate a device known as a ColorWheel(tm) to generate the colors displayed at each pixel in the image. These ColorWheel(tm) devices spin at very high speeds and can generate high-frequency tones not typically heard in liquid crystal displays and other display technologies. Also, acoustic emission testing typically occurs at the beginning of product life and is a measure of acoustic energy emitted at this point in the lifecycle. Since the product is designed to be used over a long period of time, there is concern as to whether the acoustic emissions change over the lifecycle of the product, whether these changes will result in a level of nuisance to the average customer, and does this nuisance begin to develop prior to the intended lifetime of the product.

Cardinal principle and application practice of 3D digital model design for nuclear power plant

International Nuclear Information System (INIS)

Wang Ruobing; Wu Yan

2005-01-01

The practical application of 3D digital model design at nuclear power plants was introduced in detail in the paper. The whole process for system choice, program constitution, model design and project practice were also summarized. By demonstrating the cardinal principal and application practice of 3D digital model design as an important sub-project of CGNPC Digital Plant, the paper validates the rationality and validity of the major architecture system and program configuration of the digital plant, carries out beneficial attempt and study in the overall power plant life engineering management and site practice, and has achieved significant engineering and social benefits. The success of practices in the project accelerates the extended and extensive application of Digital Plant in the operation and maintenance simulation of Daya Bay and Ling'ao Nuclear Power Plants, and the engineering design management for Ling'ao II and III of CGNPC on a consolidated basis. (authors)

The modelling of a digital forensic readiness approach for wireless local area networks

CSIR Research Space (South Africa)

Ngobeni, S

2012-06-01

Full Text Available generated by the mobile stations and to conduct a proper digital forensic investigation. This paper attempts to address this issue by proposing a wireless digital forensic readiness model designed to monitor, log and preserve wireless network traffic...

Digitally-Driven Architecture

Directory of Open Access Journals (Sweden)

Henriette Bier

2010-06-01

Full Text Available The shift from mechanical to digital forces architects to reposition themselves: Architects generate digital information, which can be used not only in designing and fabricating building components but also in embedding behaviours into buildings. This implies that, similar to the way that industrial design and fabrication with its concepts of standardisation and serial production influenced modernist architecture, digital design and fabrication influences contemporary architecture. While standardisa­tion focused on processes of rationalisation of form, mass-customisation as a new paradigm that replaces mass-production, addresses non-standard, complex, and flexible designs. Furthermore, knowledge about the designed object can be encoded in digital data pertaining not just to the geometry of a design but also to its physical or other behaviours within an environment. Digitally-driven architecture implies, therefore, not only digitally-designed and fabricated architecture, it also implies architecture – built form – that can be controlled, actuated, and animated by digital means. In this context, this sixth Footprint issue examines the influence of digital means as prag­matic and conceptual instruments for actuating architecture. The focus is not so much on computer-based systems for the development of architectural designs, but on architecture incorporating digital control, sens­ing, actuating, or other mechanisms that enable buildings to inter­act with their users and surroundings in real time in the real world through physical or sensory change and variation.

The Accuracy and Reproducibility of Linear Measurements Made on CBCT-derived Digital Models.

Science.gov (United States)

Maroua, Ahmad L; Ajaj, Mowaffak; Hajeer, Mohammad Y

2016-04-01

To evaluate the accuracy and reproducibility of linear measurements made on cone-beam computed tomography (CBCT)-derived digital models. A total of 25 patients (44% female, 18.7 ± 4 years) who had CBCT images for diagnostic purposes were included. Plaster models were obtained and digital models were extracted from CBCT scans. Seven linear measurements from predetermined landmarks were measured and analyzed on plaster models and the corresponding digital models. The measurements included arch length and width at different sites. Paired t test and Bland-Altman analysis were used to evaluate the accuracy of measurements on digital models compared to the plaster models. Also, intraclass correlation coefficients (ICCs) were used to evaluate the reproducibility of the measurements in order to assess the intraobserver reliability. The statistical analysis showed significant differences on 5 out of 14 variables, and the mean differences ranged from -0.48 to 0.51 mm. The Bland-Altman analysis revealed that the mean difference between variables was (0.14 ± 0.56) and (0.05 ± 0.96) mm and limits of agreement between the two methods ranged from -1.2 to 0.96 and from -1.8 to 1.9 mm in the maxilla and the mandible, respectively. The intraobserver reliability values were determined for all 14 variables of two types of models separately. The mean ICC value for the plaster models was 0.984 (0.924-0.999), while it was 0.946 for the CBCT models (range from 0.850 to 0.985). Linear measurements obtained from the CBCT-derived models appeared to have a high level of accuracy and reproducibility.

Playtesting the Digital Playground

DEFF Research Database (Denmark)

Majgaard, G.; Jessen, Carsten

2009-01-01

Being able to be absorbed in play in the digital playground is motivating for children who are used digital computer games. The children can play and exercise outdoors while using the same literacy as in indoor digital games. This paper presents a new playground product where an outdoor playgroun...

Transitioning to digital radiography

Energy Technology Data Exchange (ETDEWEB)

Miranda, F., E-mail: Francisco.Miranda@pwc.ca [Pratt & Whitney Canada, Longueuil, Quebec (Canada)

2015-09-15

This article provides insight on the technical and business considerations necessary to implement or to transition to digital radiography Continued refinements in digital radiography technology have resulted in significant improvements in image quality and detectability of indications. These improvements have resulted in the acceptance of the technology by users and aerospace primes for final product inspection and disposition. Digital radiography has also been identified as an interesting cost reduction initiative with the potential of providing gains in productivity through increased throughput and decreased inspection lead-times and resulting costs. (author)

St. Croix, U.S. Virgin Islands Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) for select U.S. coastal regions. These integrated...

Wake Island 3 Arc-second MHW Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) for select U.S. coastal regions. These integrated...

Barkley Sound, Canada 1 arc-second Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Centers for Environmental Information is building high-resolution digital elevation models (DEMs) for select U.S. coastal regions. These integrated...

Digital Elevation Models (DEMs) for the main 8 Hawaiian Islands

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Digital elevation model (DEM) data are arrays of regularly spaced elevation values referenced horizontally either to a Universal Transverse Mercator (UTM) projection...

Miami 1/3 arc-second MHW Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) for select U.S. coastal regions. These integrated...

Midway Atoll 3 Arc-second MHW Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) for select U.S. coastal regions. These integrated...

Society Islands, French Polynesia Digital Elevation Model - 3 arc-second

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Centers for Environmental Information is building high-resolution digital elevation models (DEMs) for select U.S. coastal regions. These integrated...

Sitka, Alaska 3 Arc-second MHW Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) for select U.S. coastal regions. These integrated...

Kodiak, Alaska 1/3 arc-second Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) for select U.S. coastal regions. These integrated...

Central California 1 Arc-second MWH Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) for select U.S. coastal regions. These integrated...

Rasch family models in e-learning: analyzing architectural sketching with a digital pen.

Science.gov (United States)

Scalise, Kathleen; Cheng, Nancy Yen-Wen; Oskui, Nargas

2009-01-01

Since architecture students studying design drawing are usually assessed qualitatively on the basis of their final products, the challenges and stages of their learning have remained masked. To clarify the challenges in design drawing, we have been using the BEAR Assessment System and Rasch family models to measure levels of understanding for individuals and groups, in order to correct pedagogical assumptions and tune teaching materials. This chapter discusses the analysis of 81 drawings created by architectural students to solve a space layout problem, collected and analyzed with digital pen-and-paper technology. The approach allows us to map developmental performance criteria and perceive achievement overlaps in learning domains assumed separate, and then re-conceptualize a three-part framework to represent learning in architectural drawing. Results and measurement evidence from the assessment and Rasch modeling are discussed.

Products as communication platforms: Investigating and foretelling the evolution of product&service systems in the digital era

OpenAIRE

Vitale, Anna Serena; Pillan, Margherita

2016-01-01

[EN] In the lifecycle of material products, information and communication have always played a prominent part that, in the digital era, is growing and is expected to grow further, also enabling the blooming of grass root and bottom-up changes in the galaxy of designproduction-retail systems. Retail services are not just a way to obtain goods: they provide opportunities for social relationship and cultural growth, and can be considered as a field for social innovation. Our resea...

Akutan, Alaska 8/3 Arc-second Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) to support individual coastal States as part of the...

Nikolski, Alaska 1 arc-second MHHW Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) to support individual coastal States as part of the...

Yakutat, Alaska 8 Arc-second MHHW Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) to support individual coastal States as part of the...

King Cove, Alaska 8 arc-second Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) to support individual coastal States as part of the...

Akutan, Alaska 8/15 Arc-second Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) to support individual coastal States as part of the...

Chiniak, Alaska 8/15 arc-second Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Centers for Environmental Information is building high-resolution digital elevation models (DEMs) to support individual coastal States as part of the...

Cold Bay, Alaska 8 arc-second Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) to support individual coastal States as part of the...

Chignik, Alaska 1/3 arc-second Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) to support individual coastal States as part of the...

STRATEGI PEMASARAN PRODUK DIGITAL PRINTING PADA CV. FNB DIGITAL JAMBI

OpenAIRE

Yuniarti, Yenni; Mauliana, Sarah

2012-01-01

CV. Digital FNB is one of the companies that involved in Digital Printing business. Based on survey in the middle of 2011-2012, there are 31 digital printing businesses in the city of Jambi. In order to examine the marketing stratey implemented, descriptive study has been conducted, uses interview, observation, and documentation as instruments. The strategy that observed in this study consist of marketing strategy including market segmentation, targeting, product strategy, pricing strategy, ...

Digital 3D Modeling of Whole Garment Based on Structure Illumination

Institute of Scientific and Technical Information of China (English)

TAO Jun

2006-01-01

With the coming of information age and the development of computer science, digitalization of whole garment is becoming more and more important. The surface of whole garment is sequent and glossy so that it is lack of the texture characteristic which is the key of digital 3D modeling.According to this reason, the structure illumination is steered into a method of this paper. The paper proposes the method by which 3D model of whole garment is created from 2D image sequences directly but not by the common techniques using general CAD model. In the paper the structure illumination is generated by the slide projector and the modeling of whole garment is based on the strict theory of the digital photogrammetry, computer vision and image processing pattern recognition. Because whole garment is lack of the applicable texture for matching, the characteristic texture generated by the structure illumination is added onto the surface of whole garment. After the characteristic texture is extracted from images and is matched well, 3D coordinates of the characteristic texture can be calculated out by the space forward intersection.Then the whole garment model is acquired by connecting all neighbour space points in the TIN and rendering the real texture of whole garment automatically. The 3D modeling method is untouched so that it is nondestructive which is just suitable for the messaline and the clothing. The method of whole garment 3D modeling proposed in the paper is flexible, effective and practical, which is confirmed by the results of the reconstructing experiments.

Digital Entrepreneurships and Business Models Canvas: Applied Research for Communication University Students

Directory of Open Access Journals (Sweden)

Jorge Montalvo-Castro

2016-07-01

Full Text Available Digital economy requires other business models different to the ones present in the physical world; therefore, they should be studied from a particular perspective. In this research a variety of canvas formats or business model canvas are compared and analyzed. The entrepreneurial intention of Communication students from the University of Lima is also studied. The methodology included a survey among students and an educational experience within the subject: Advertising Creativity. The main result of this research is a proposal canvas to design digital entrepreneurships in Communication, whether commercial or social businesses.

Simple cortical and thalamic neuron models for digital arithmetic circuit implementation

Directory of Open Access Journals (Sweden)

Takuya eNanami

2016-05-01

Full Text Available Trade-off between reproducibility of neuronal activities and computational efficiency is one ofcrucial subjects in computational neuroscience and neuromorphic engineering. A wide variety ofneuronal models have been studied from different viewpoints. The digital spiking silicon neuron(DSSN model is a qualitative model that focuses on efficient implementation by digital arithmeticcircuits. We expanded the DSSN model and found appropriate parameter sets with which itreproduces the dynamical behaviors of the ionic-conductance models of four classes of corticaland thalamic neurons. We first developed a 4-variable model by reducing the number of variablesin the ionic-conductance models and elucidated its mathematical structures using bifurcationanalysis. Then, expanded DSSN models were constructed that reproduce these mathematicalstructures and capture the characteristic behavior of each neuron class. We confirmed thatstatistics of the neuronal spike sequences are similar in the DSSN and the ionic-conductancemodels. Computational cost of the DSSN model is larger than that of the recent sophisticatedIntegrate-and-Fire-based models, but smaller than the ionic-conductance models. This modelis intended to provide another meeting point for above trade-off that satisfies the demand forlarge-scale neuronal network simulation with closer-to-biology models.

Detection and quantification of beef and pork materials in meat products by duplex droplet digital PCR

OpenAIRE

Cai, Yicun; He, Yuping; Lv, Rong; Chen, Hongchao; Wang, Qiang; Pan, Liangwen

2017-01-01

Meat products often consist of meat from multiple animal species, and inaccurate food product adulteration and mislabeling can negatively affect consumers. Therefore, a cost-effective and reliable method for identification and quantification of animal species in meat products is required. In this study, we developed a duplex droplet digital PCR (dddPCR) detection and quantification system to simultaneously identify and quantify the source of meat in samples containing a mixture of beef (Bos t...

State of the Art of Cost and Benefit Models for Digital Curation

DEFF Research Database (Denmark)

Kejser, Ulla Bøgvad; Davidson, Joy; Wang, David

2014-01-01

, to support decision-making and for selecting the most efficient processes – all of which are critical for ensuring sustainability of digital curation investment. The evaluation revealed that the most prominent challenges are associated with the models’ usability, their inability to model quality and benefits......This paper presents the results of an evaluation carried out by the EU 4C project to assess how well current digital curation cost and benefit models meet a range of stakeholders’ needs. This work aims to elicit a means of modelling that enables comparing financial information across organisations...... of curation, and the lack of a clear terminology and conceptual description of costs and benefits. The paper provides recommendations on how these gaps in cost and benefit modelling can be bridged....

Do pre-trained deep learning models improve computer-aided classification of digital mammograms?

Science.gov (United States)

Aboutalib, Sarah S.; Mohamed, Aly A.; Zuley, Margarita L.; Berg, Wendie A.; Luo, Yahong; Wu, Shandong

2018-02-01

Digital mammography screening is an important exam for the early detection of breast cancer and reduction in mortality. False positives leading to high recall rates, however, results in unnecessary negative consequences to patients and health care systems. In order to better aid radiologists, computer-aided tools can be utilized to improve distinction between image classifications and thus potentially reduce false recalls. The emergence of deep learning has shown promising results in the area of biomedical imaging data analysis. This study aimed to investigate deep learning and transfer learning methods that can improve digital mammography classification performance. In particular, we evaluated the effect of pre-training deep learning models with other imaging datasets in order to boost classification performance on a digital mammography dataset. Two types of datasets were used for pre-training: (1) a digitized film mammography dataset, and (2) a very large non-medical imaging dataset. By using either of these datasets to pre-train the network initially, and then fine-tuning with the digital mammography dataset, we found an increase in overall classification performance in comparison to a model without pre-training, with the very large non-medical dataset performing the best in improving the classification accuracy.

Northern Gulf 1 Arc-second MHW Coast Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) for select U.S. coastal regions in the Gulf of Mexico....

Mobile, Alabama 1/3 NAVD 88 Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) for select U.S. coastal regions in the Gulf of Mexico....

DIGITIZATION OF BUSINESS PROCESSES AND TECNOMATIX AS A COMPREHENSIVE PACKAGE INSTRUMENT FOR THE CREATION OF THE DIGITAL FACTORY

Directory of Open Access Journals (Sweden)

Marek Kliment

2014-09-01

Full Text Available Current trends in the development of a dynamic and turbulent world economy are largely digitization. Once upon the implementation and application of new production, made the setting and testing of variants directly to the production lines for their full operation. First production tested, set its standards and then began the production program. These procedures were but very costly and lengthy and on-going businesses big money and precious time. Gradual deployment of various software techniques, these processes are transferred into digital form. Technology has come to the point that all business and production processes nowadays we can make this into a digital form. In this way we manufacture everything in detail and test plan prior to the launch date line. Such technology is called Digital Factory.

Digital Model-Based Engineering: Expectations, Prerequisites, and Challenges of Infusion

Science.gov (United States)

Hale, J. P.; Zimmerman, P.; Kukkala, G.; Guerrero, J.; Kobryn, P.; Puchek, B.; Bisconti, M.; Baldwin, C.; Mulpuri, M.

2017-01-01

Digital model-based engineering (DMbE) is the use of digital artifacts, digital environments, and digital tools in the performance of engineering functions. DMbE is intended to allow an organization to progress from documentation-based engineering methods to digital methods that may provide greater flexibility, agility, and efficiency. The term 'DMbE' was developed as part of an effort by the Model-Based Systems Engineering (MBSE) Infusion Task team to identify what government organizations might expect in the course of moving to or infusing MBSE into their organizations. The Task team was established by the Interagency Working Group on Engineering Complex Systems, an informal collaboration among government systems engineering organizations. This Technical Memorandum (TM) discusses the work of the MBSE Infusion Task team to date. The Task team identified prerequisites, expectations, initial challenges, and recommendations for areas of study to pursue, as well as examples of efforts already in progress. The team identified the following five expectations associated with DMbE infusion, discussed further in this TM: (1) Informed decision making through increased transparency, and greater insight. (2) Enhanced communication. (3) Increased understanding for greater flexibility/adaptability in design. (4) Increased confidence that the capability will perform as expected. (5) Increased efficiency. The team identified the following seven challenges an organization might encounter when looking to infuse DMbE: (1) Assessing value added to the organization. Not all DMbE practices will be applicable to every situation in every organization, and not all implementations will have positive results. (2) Overcoming organizational and cultural hurdles. (3) Adopting contractual practices and technical data management. (4) Redefining configuration management. The DMbE environment changes the range of configuration information to be managed to include performance and design models

Lipase Production in Solid-State Fermentation Monitoring Biomass Growth of Aspergillus niger Using Digital Image Processing

Science.gov (United States)

Dutra, Julio C. V.; da Terzi, Selma C.; Bevilaqua, Juliana Vaz; Damaso, Mônica C. T.; Couri, Sônia; Langone, Marta A. P.; Senna, Lilian F.

The aim of this study was to monitor the biomass growth of Aspergillus niger in solid-state fermentation (SSF) for lipase production using digital image processing technique. The strain A. niger 11T53A14 was cultivated in SSF using wheat bran as support, which was enriched with 0.91% (m/v) of ammonium sulfate. The addition of several vegetable oils (castor, soybean, olive, corn, and palm oils) was investigated to enhance lipase production. The maximum lipase activity was obtained using 2% (m/m) castor oil. In these conditions, the growth was evaluated each 24 h for 5 days by the glycosamine content analysis and digital image processing. Lipase activity was also determined. The results indicated that the digital image process technique can be used to monitor biomass growth in a SSF process and to correlate biomass growth and enzyme activity. In addition, the immobilized esterification lipase activity was determined for the butyl oleate synthesis, with and without 50% v/v hexane, resulting in 650 and 120 U/g, respectively. The enzyme was also used for transesterification of soybean oil and ethanol with maximum yield of 2.4%, after 30 min of reaction.

Lipase production in solid-state fermentation monitoring biomass growth of aspergillus niger using digital image processing.

Science.gov (United States)

Dutra, Júlio C V; da C Terzi, Selma; Bevilaqua, Juliana Vaz; Damaso, Mônica C T; Couri, Sônia; Langone, Marta A P; Senna, Lilian F

2008-03-01

The aim of this study was to monitor the biomass growth of Aspergillus niger in solid-state fermentation (SSF) for lipase production using digital image processing technique. The strain A. niger 11T53A14 was cultivated in SSF using wheat bran as support, which was enriched with 0.91% (m/v) of ammonium sulfate. The addition of several vegetable oils (castor, soybean, olive, corn, and palm oils) was investigated to enhance lipase production. The maximum lipase activity was obtained using 2% (m/m) castor oil. In these conditions, the growth was evaluated each 24 h for 5 days by the glycosamine content analysis and digital image processing. Lipase activity was also determined. The results indicated that the digital image process technique can be used to monitor biomass growth in a SSF process and to correlate biomass growth and enzyme activity. In addition, the immobilized esterification lipase activity was determined for the butyl oleate synthesis, with and without 50% v/v hexane, resulting in 650 and 120 U/g, respectively. The enzyme was also used for transesterification of soybean oil and ethanol with maximum yield of 2.4%, after 30 min of reaction.

VBMP Digital Terrain Models - 2006/2007 (VA State Plane South)

Data.gov (United States)

Federal Emergency Management Agency, Department of Homeland Security — These files contain Digital Elevation Model (DTM) file data for the Commonwealth of Virginia developed from imagery acquired in spring 2006 and 2007. In the spring...

Noise-shaping all-digital phase-locked loops modeling, simulation, analysis and design

CERN Document Server

Brandonisio, Francesco

2014-01-01

This book presents a novel approach to the analysis and design of all-digital phase-locked loops (ADPLLs), technology widely used in wireless communication devices. The authors provide an overview of ADPLL architectures, time-to-digital converters (TDCs) and noise shaping. Realistic examples illustrate how to analyze and simulate phase noise in the presence of sigma-delta modulation and time-to-digital conversion. Readers will gain a deep understanding of ADPLLs and the central role played by noise-shaping. A range of ADPLL and TDC architectures are presented in unified manner. Analytical and simulation tools are discussed in detail. Matlab code is included that can be reused to design, simulate and analyze the ADPLL architectures that are presented in the book.   • Discusses in detail a wide range of all-digital phase-locked loops architectures; • Presents a unified framework in which to model time-to-digital converters for ADPLLs; • Explains a procedure to predict and simulate phase noise in oscil...

MORPHOLOGICAL FILLING OF DIGITAL ELEVATION MODELS

Directory of Open Access Journals (Sweden)

T. Krauß

2012-09-01

Full Text Available In this paper a new approach for a more detailed post processing and filling of digital elevation models (DEMs in urban areas is presented. To reach the required specifications in a first step the errors in digital surface models (DSMs generated by dense stereo algorithms are analyzed and methods for detection and classification of the different types of errors are implemented. Subsequently the classified erroneous areas are handled in separate manner to eliminate outliers and fill the DSM properly. The errors which can be detected in DSMs range from outliers – single pixels or small areas containing extremely high or low values – over noise from mismatches, single small holes to occlusions, where large areas are not visible in one of the images of the stereo pair. To validate the presented method artificial DSMs are generated and superimposed with all different kinds of described errors like noise (small holes cut in, outliers (small areas moved up/down, occlusions (larger areas beneath steep walls and so on. The method is subsequently applied to the artificial DSMs and the resulting filled DSMs are compared to the original artificial DSMs without the introduced errors. Also the method is applied to stereo satellite generated DSMs from the ISPRS Comission 1 WG4 benchmark dataset and the results are checked with the also provided first pulse laser DSM data. Finally the results are discussed, strengths and weaknesses of the approach are shown and suggestions for application and optimization are given.

Digital supply chain management by using it systems

OpenAIRE

Stanišauskas, Ramūnas

2018-01-01

There are a lot of researches done to better understand the main principles of supply chain management, therefore supply chain management is well understood and quite common. On the other hand, nowadays more and more products and services are developed in digital environment, therefore regular supply chains are no longer viable and it is quite hard to adapt them. Suppliers in digital supply chain are creating digital products by using computer technologies and therefore digital products never...

Digital terrain modelling development and applications in a policy support environment

CERN Document Server

Peckham, Robert Joseph

2007-01-01

This publication is the first book on the development and application of digital terrain modelling for regional planning and policy support. It is a compilation of research results by international research groups at the European Commission's Joint Research Centre providing scientific support to the development and implementation of EU environmental policy. Applications include the pan-European River and Catchment Database, European Flood Alert System, European Digital Soil Database and alternative solar energy resources, all discussed in a GIS framework in the context of the INfrastructure for SPatial InfoRmation in Europe (INSPIRE). This practice-oriented book is recommended to practicing environmental modellers and GIS experts working on regional planning and policy support applications.

Concept of digital nomad: fundamental risks of digital economy development

Directory of Open Access Journals (Sweden)

Elena Lyudvigovna Iakovleva

2017-12-01

Full Text Available Objective to identify the key risks of the digital economy development. Methods abstractlogical and dialectical methods. Results a modern individual cannot imagine their life without digital devices which facilitate their functioning and enable them to be included into the virtual space. The role of digital economy in the changes in all spheres of human life is analyzed in the article. With the growing role of the digital economy the approaches to business models formation are changing as well as the role of digital assets. This also leads to the transformation of human behavior the new risks of the digital economy accelerated development. In this regard the article characterizes an individual as a digital nomad defines the features of their behavior in the socioeconomic environment and highlights the main risks that arise in connection with digital nomadism. It is determined that one of the most characteristic features of a modern person is hypermobility eparkourism. In addition the paper describes the problems of anonymity in virtual space and the emergence of systems that provide anonymity of the individual as well as the risks arising in connection with that. The problem of lack of culture and value systems in the virtual space is highlighted as well the problem of developing contradictions in information leading to the alienation of people from the real world. It was determined that the informatization of economy on the one hand leads to faster business processes reduced transaction costs saving of variable costs due to robotization of production and on the other hand it leads to the transformation of competition growth of tension in society in connection with the job cuts. Another problem is personal and national security associated with the development of social networks the developers of which are other countries and also with the emergence of mechanisms of influence on mass consciousness. Scientific novelty it is shown that the risks

St. Croix, U.S. Virgin Islands Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — The 1/3 arc-second St. Croix, U.S. Virgin Islands Coastal Digital Elevation Model will be used to support NOAA's tsunami forecast system and for tsunami inundation...

Applying the Digital Doorway design research model in facilitating skills transfer in rural communities

CSIR Research Space (South Africa)

Herselman, ME

2010-11-01

Full Text Available The purpose of this article is to indicate how skills can be transferred through the application of the Digital Doorway (DD) design research model. Skills transfer takes place between the initiators of Digital Doorway (CSIR Meraka Institute) project...

Digital identity management

CERN Document Server

Laurent, Maryline

2015-01-01

In the past four decades, information technology has altered chains of value production, distribution, and information access at a significant rate. These changes, although they have shaken up numerous economic models, have so far not radically challenged the bases of our society.This book addresses our current progress and viewpoints on digital identity management in different fields (social networks, cloud computing, Internet of Things (IoT)), with input from experts in computer science, law, economics and sociology. Within this multidisciplinary and scientific context, having crossed analys

Digital imaging in health care

International Nuclear Information System (INIS)

1987-01-01

This volume describes equipment for the generation and processing of digital images in medicine. Separate chapters deal with international trade i this equipment, with economic and social considerations of digital imaging, with experiences in the use and production of digital imaging equipment and with the current status and likely trends in applications of digital imaging. 84 refs, figs and tabs

Generating Collaborative Systems for Digital Libraries: a Model-Driven Approach

Directory of Open Access Journals (Sweden)

Alessio Malizia

2010-12-01

Full Text Available The design and development of a digital library involves different stakeholders, such as: information architects, librarians, and domain experts, who need to agree on a common language to describe, discuss, and negotiate the services the library has to offer. To this end, high-level, language-neutral models have to be devised. Metamodeling techniques favor the definition of domainspecific visual languages through which stakeholders can share their views and directly manipulate representations of the domain entities. This paper describes CRADLE (Cooperative-Relational Approach to Digital Library Environments, a metamodel-based framework and visual language for the definition of notions and services related to the development of digital libraries. A collection of tools allows the automatic generation of several services, defined with the CRADLE visual language, and of the graphical user interfaces providing access to them for the final user. The effectiveness of the approach is illustrated by presenting digital libraries generated with CRADLE, while the CRADLE environment has been evaluated by using the cognitive dimensions framework.

Digital Quantum Simulation of Spin Models with Circuit Quantum Electrodynamics

Directory of Open Access Journals (Sweden)

Y. Salathé

2015-06-01

Full Text Available Systems of interacting quantum spins show a rich spectrum of quantum phases and display interesting many-body dynamics. Computing characteristics of even small systems on conventional computers poses significant challenges. A quantum simulator has the potential to outperform standard computers in calculating the evolution of complex quantum systems. Here, we perform a digital quantum simulation of the paradigmatic Heisenberg and Ising interacting spin models using a two transmon-qubit circuit quantum electrodynamics setup. We make use of the exchange interaction naturally present in the simulator to construct a digital decomposition of the model-specific evolution and extract its full dynamics. This approach is universal and efficient, employing only resources that are polynomial in the number of spins, and indicates a path towards the controlled simulation of general spin dynamics in superconducting qubit platforms.

Embedded digital oilfield model

Science.gov (United States)

Korovin, Iakov S.; Boldyreff, Anton S.

2017-10-01

In modern hard conditions for the whole worldwide oil production industry the problem of increasing volumes of produced oil has recently become vital. This problem concerns the existing oilfields cause due to low crude oil prices the possibilities to drill new ones has almost disappeared. In this paper, we describe a novel approach of oil production enhancement, based on online procedures of all oil field data processing. The essence is that we have developed a dynamic oilfield model that allows to simultaneously handle the information, stored in tNavigator, Schlumberger ECLIPSE 100/300 and other `popular' formats in parallel. The model is developed on the basis of convolutional neural networks. An example of successful industrial experiment is depicted.

Planialtimetric Accuracy Evaluation of Digital Surface Model (dsm) and Digital Terrain Model (dtm) Obtained from Aerial Survey with LIDAR

Science.gov (United States)

Cruz, C. B. M.; Barros, R. S.; Rabaco, L. M. L.

2012-07-01

It's noticed a significant increase in the development of orbital and airborne sensors that enable the extraction of three-dimensional data. Consequently, it's important the increment of studies about the quality of altimetric values derived from these sensors to verify if the improvements implemented in the acquisition of data may influence the results. In this context, as part of a larger project that aims to evaluate the accuracy of various sensors, this work aims to analysis the planialtimetric accuracy of DSM and DTM generated from an aerial survey with LIDAR, using as reference for the planimetric analysis of the orthophotos obtained. The project was developed for an area of São Sebastião city, located in the basin of the North Coast of São Paulo state. The area's relief is very steep, with a predominance of dense forest vegetation, typical of the Atlantic Forest. All points have been established in the field, with the use of GNSS of one frequency (L1) through static relative positioning, acquiring a minimum of 1,500 epochs, for a distance less than 20 km to the base. In this work it's considered the Brazilian standard specifications for classification of cartographic bases (PEC). The Brazilian company responsible for the aerial survey (LACTEC) gave the following products for analysis: point clouds in raw format (x, y, z) using orthometric heights; point clouds (first and last pulse) for each range of flight to verify systematic errors; DTM uniformly spaced, filtering small natural obstacles, buildings and vegetation, in Geotiff format; DSM also uniformly spaced, in Geotiff format; and the mosaic of georeferenced digital images. The analysis realized on products from the LIDAR indicated their adoption to the scales 1:2,000 (Class A for the orthophotos and Class B for the DTM) and 1:5,000 (class C for the DSM). There were no indications of trends in the results. The average error was 0.01 m. It's important that new areas with different topographic

Basic entwinements: unassuming analogue inserts in basic digital modeling (courses)

DEFF Research Database (Denmark)

Wiesner, Thomas

2012-01-01

Ubiquitous, basic digital modelling tools are currently deployed with relative ease in architecture schools during the course of first year studies. While these first architectural projects essays sometimes communicate matter with already quite impressive professional outlooks, a certain disparit...

Digital Density as the Driving Force of Digital Transformation Processes

OpenAIRE

Bush, Xavier

2016-01-01

Digital technologies have increased the influence of technology in business, even changing business models and strategies of organisations. This influence, called Digital Transformation of Business (DT), happens when there is an increase of the number of digital connections, information and interactions. This phenom-ena has been defined as Digital Density (DD) and aims to provide an assessment of the digitalization status of an organization. With the concept of DD we pro-pose the DD Framework, t...

Interweaving digitality in the fabric of design

NARCIS (Netherlands)

De Roeck, D.A.J.; Standaert, A.; Paauwe, R.A.; Verwulgen, S.; Baelus, C.; Stappers, P.J.

2012-01-01

Products that embrace and integrate an invisible, digital world are appearing around us in a rapid pace.This emerging type of products introduces a new dynamic between people, objects and the context oruse. The integration of embedded, pervasive and digital technologies in products imposes

The Born Digital Graduate: Multiple Representations of and within Digital Humanities PhD Theses

Science.gov (United States)

Webb, Sharon; Teehan, Aja; Keating, John

2013-01-01

This chapter examines the production and utilisation of digital tools to create and present a born-digital theses, and in so doing, considers the changing function of traditional theses. It asks how (relatively) new technologies and methodologies should affect the representation and function of graduate scholarship in the Digital Humanities (DH),…

The digital transformation of business models in the creative industries: A holistic framework and emerging trends

OpenAIRE

Li, F.

2018-01-01

This paper examines how digital technologies facilitate business model innovations in the creative industries. Through a systematic literature review, a holistic business model framework is developed, which is then used to analyse the empirical evidence from the creative industries. The research found that digital technologies have facilitated pervasive changes in business models, and some significant trends have emerged. However, the reconfigured business models are often not ‘new’ in the un...

Thermophysical modeling for high-resolution digital terrain models

Science.gov (United States)

Pelivan, I.

2018-04-01

A method is presented for efficiently calculating surface temperatures for highly resolved celestial body shapes. A thorough investigation of the necessary conditions leading to reach model convergence shows that the speed of surface temperature convergence depends on factors such as the quality of initial boundary conditions, thermal inertia, illumination conditions, and resolution of the numerical depth grid. The optimization process to shorten the simulation time while increasing or maintaining the accuracy of model results includes the introduction of facet-specific boundary conditions such as pre-computed temperature estimates and pre-evaluated simulation times. The individual facet treatment also allows for assigning other facet-specific properties such as local thermal inertia. The approach outlined in this paper is particularly useful for very detailed digital terrain models in combination with unfavorable illumination conditions such as little to no sunlight at all for a period of time as experienced locally on comet 67P/Churyumov-Gerasimenko. Possible science applications include thermal analysis of highly resolved local (landing) sites experiencing seasonal, environment and lander shadowing. In combination with an appropriate roughness model, the method is very suitable for application to disk-integrated and disk-resolved data. Further applications are seen where the complexity of the task has led to severe shape or thermophysical model simplifications such as in studying surface activity or thermal cracking.

Three-dimensional displays for natural hazards analysis, using classified Landsat Thematic Mapper digital data and large-scale digital elevation models

Science.gov (United States)

Butler, David R.; Walsh, Stephen J.; Brown, Daniel G.

1991-01-01

Methods are described for using Landsat Thematic Mapper digital data and digital elevation models for the display of natural hazard sites in a mountainous region of northwestern Montana, USA. Hazard zones can be easily identified on the three-dimensional images. Proximity of facilities such as highways and building locations to hazard sites can also be easily displayed. A temporal sequence of Landsat TM (or similar) satellite data sets could also be used to display landscape changes associated with dynamic natural hazard processes.

Digital by-product data in web 2.0 exploring mass collaboration of Wikipedia

CERN Document Server

He, Zeyi

2012-01-01

Thanks to Information and Communication Technologies (ICTs), every action on the Internet nowadays is recorded by digital by-product data: online purchases, tagging friends' photos, browsing webpages, etc. This unprecedented technological revolution has empowered us with unique abilities to understand not only people's behaviours, but also online platforms. Business corporates and academic researchers alike have both embarked on actively mining such information to stay ahead of the game in th...

Addressing selected problems of the modelling of digital control systems

International Nuclear Information System (INIS)

Sedlak, J.

2004-12-01

The introduction of digital systems to practical activities at nuclear power plants brings about new requirements for their modelling for the purposes of reliability analyses required for plant licensing as well as for inclusion into PSA studies and subsequent use in applications for the assessment of events, limits and conditions, and risk monitoring. It is very important to assess, both qualitatively and quantitatively, the effect of this change on operational safety. The report describes selected specific features of reliability analysis of digital system and recommends methodological procedures. The chapters of the report are as follows: (1) Flexibility and multifunctionality of the system. (2) General framework of reliability analyses (Understanding the system; Qualitative analysis; Quantitative analysis; Assessment of results, comparison against criteria; Documenting system reliability analyses; Asking for comments and their evaluation); and (3) Suitable reliability models (Reliability models of basic events; Monitored components with repair immediately following defect or failure; Periodically tested components; Constant unavailability (probability of failure to demand); Application of reliability models for electronic components; Example of failure rate decomposition; Example modified for diagnosis successfulness; Transfer of reliability analyses to PSA; Common cause failures - CCF; Software backup and CCF type failures, software versus hardware). (P.A.)

Marquesas Islands, French Polynesia 3 arc-second Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Centers for Environmental Information is building high-resolution digital elevation models (DEMs) for select U.S. coastal regions. These integrated...

Port Alberni, Canada 1/3 arc-second Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Centers for Environmental Information is building high-resolution digital elevation models (DEMs) for select U.S. coastal regions. These integrated...

Digital Elevation Model of Kauai, Hawaii, Integrating Bathymetric and Topographic Datasets

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) for select U.S. coastal regions. These integrated...

Crescent City, California 1/3 Arc-second Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) for select U.S. coastal regions. These integrated...

Cordova, Alaska 1/3 Arc-second MHW Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) for select U.S. coastal regions. These integrated...

Tutuila, American Samoa 1/3 arc-second Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) for select U.S. coastal regions. These integrated...

Eureka, California 1/3 Arc-second MHW Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) for select U.S. coastal regions. These integrated...

Central Florida 1/3 arc-second MHW Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) for select U.S. coastal regions. These integrated...

Puget Sound 1/3 arc-second MHW Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) for select U.S. coastal regions. These integrated...

Society Islands (Leeward), French Polynesia Digital Elevation Model - 1 arc-second

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Centers for Environmental Information is building high-resolution digital elevation models (DEMs) for select U.S. coastal regions. These integrated...

Midway Atoll 1/3 Arc-second MHW Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) for select U.S. coastal regions. These integrated...

Society Islands (Windward), French Polynesia Digital Elevation Model - 1 arc-second

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Centers for Environmental Information is building high-resolution digital elevation models (DEMs) for select U.S. coastal regions. These integrated...

Miami 1/3 arc-second NAVD 88 Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) for select U.S. coastal regions. These integrated...

Central California 1 Arc-second NAVD 88 Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) for select U.S. coastal regions. These integrated...

Wake Island 1/3 Arc-second MHW Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) for select U.S. coastal regions. These integrated...

Monterey, California 1/3 Arc-second MHW Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) for select U.S. coastal regions. These integrated...

Tampa Bay 1/3 arc-second MHW Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) for select U.S. coastal regions. These integrated...

Garibaldi, Oregon 1/3 Arc-second MHW Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) for select U.S. coastal regions. These integrated...

Sitka, Alaska 1/3 Arc-second MHW Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) for select U.S. coastal regions. These integrated...

Digital printing

Science.gov (United States)

Sobotka, Werner K.

1997-02-01

Digital printing is described as a tool to replace conventional printing machines completely. Still this goal was not reached until now with any of the digital printing technologies to be described in the paper. Productivity and costs are still the main parameters and are not really solved until now. Quality in digital printing is no problem anymore. Definition of digital printing is to transfer digital datas directly on the paper surface. This step can be carried out directly or with the use of an intermediate image carrier. Keywords in digital printing are: computer- to-press; erasable image carrier; image carrier with memory. Digital printing is also the logical development of the new digital area as it is pointed out in Nicholas Negropotes book 'Being Digital' and also the answer to networking and Internet technologies. Creating images text and color in one country and publishing the datas in another country or continent is the main advantage. Printing on demand another big advantage and last but not least personalization the last big advantage. Costs and being able to coop with this new world of prepress technology is the biggest disadvantage. Therefore the very optimistic growth rates for the next few years are really nonexistent. The development of complete new markets is too slow and the replacing of old markets is too small.

Serious games for digital tablets as an introduction to 3D modeling and printing

Directory of Open Access Journals (Sweden)

José Luis SAORIN

2015-07-01

Full Text Available Currently, one of the most direct ways children access to digital technology is through games. This aspect is usually not considered in educational settings in the acquisition of Basic Skills. However, there are international reports assessing the potential of video games as an educational resource. Since 2006, the Horizon Report includes educational video games as a technology impact on teaching, learning and creative expression in education environments. In the 2012 Report, Digital Tablets are considered as one of the technologies most likely to be in widespread use in education in the short term. On the other hand, there are studies linking student interest in careers in science, art and technology to the premature use of 3D modeling tools or 3D printing. In this article, we want to value two applications, Blokify and Pottery, available for digital tablets, which work like games that introduce students to the three-dimensional digital modeling and printing.

Factors enhancing learning possibilities in digital workshops

Directory of Open Access Journals (Sweden)

Christian Kobbernagel

2014-05-01

Full Text Available This article presents a study of processes supporting student learning possibilities in digital workshops planned and held at art museums in Denmark. The investigation aims to provide insights into factors enhancing learning possibilities, including the educator’s dialogic performance, experiences of art, and perceived qualities of digital content creation processes in art museum education workshops. To address the research question of what conditional and processual factors can be said to support learning possibilities, a model was developed on the basis of fieldwork and theories of media education, art pedagogy and motivation. The model was then analyzed using structural equation modelling (SEM on data collected (N= 502 after workshops in two museums. The results suggest that the dialogic performance of museum educators, a positive art experience and positive perceptions of working with digital media are factors that strongly support student participation and reflection – although to various degrees. The findings also show that, in cases in which students are disinterested and see little value in participating during the workshop, this amotivation is likely to be lower when their art experiences and their perceptions of the media production process are positive. 

Factors enhancing learning possibilities in digital workshops

Directory of Open Access Journals (Sweden)

Christian Kobbernagel

2014-06-01

Full Text Available This article presents a study of processes supporting student learning possibilities in digital workshops planned and held at art museums in Denmark. The investigation aims to provide insights into factors enhancing learning possibilities, including the educator’s dialogic performance, experiences of art, and perceived qualities of digital content creation processes in art museum education workshops. To address the research question of what conditional and processual factors can be said to support learning possibilities, a model was developed on the basis of fieldwork and theories of media education, art pedagogy and motivation. The model was then analyzed using structural equation modelling (SEM on data collected (N= 502 after workshops in two museums. The results suggest that the dialogic performance of museum educators, a positive art experience and positive perceptions of working with digital media are factors that strongly support student participation and reflection – although to various degrees. The findings also show that, in cases in which students are disinterested and see little value in participating during the workshop, this amotivation is likely to be lower when their art experiences and their perceptions of the media production process are positive.

False Pass, Alaska 8/15 arc-second Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Centers for Environmental Information is building high-resolution digital elevation models (DEMs) to support individual coastal States as part of the...

Yakutat, Alaska 8/15 Arc-second MHHW Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) to support individual coastal States as part of the...

Elfin Cove Alaska 1/3 Arc-second Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) to support individual coastal States as part of the...

Cordova, Alaska 8/15 Arc-second MHHW Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) to support individual coastal States as part of the...

King Cove, Alaska 8/3 arc-second Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) to support individual coastal States as part of the...

King Cove, Alaska 8/15 arc-second Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) to support individual coastal States as part of the...

Nikolski, Alaska 1/3 arc-second MHHW Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) to support individual coastal States as part of the...

Port Lions, Alaska 8/15 arc-second Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Centers for Environmental Information is building high-resolution digital elevation models (DEMs) to support individual coastal States as part of the...

Yakutat, Alaska 8/3 Arc-second MHHW Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) to support individual coastal States as part of the...

Digital Elevation Model of Southeast Alaska, Integrating Bathymetric and Topographic Datasets

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) to support individual coastal States as part of the...

Cold Bay, Alaska 8/15 arc-second Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) to support individual coastal States as part of the...

The modeling of a digital forensic readiness approach to WLAN digital forensics

CSIR Research Space (South Africa)

Ngobeni, S

2010-01-01

Full Text Available digital forensics is seen as not only a counterproposal but as a solution to the rapid increase of cyber crime in WLANs. The key issue impacting WLAN digital forensics is that, it is an enormous challenge to intercept and preserve all the communications...

Digital economy and non-standard work

Directory of Open Access Journals (Sweden)

Patrizia Tullini

2016-12-01

Full Text Available Public and scientific debate on the digital economy is now widespread in many european countries. Also labour law scholars started to pay more attention to the new economical models and to the impact of digital technologies on productive processes. Economics and labour sciences should now move from a descriptive analysis to a deeper theoretical elaboration.The directions of the theoretical analysis are essentially two: the first one deals with the overbearing diffusion of non-standard forms of work on the web, especially on the digital platforms. This trend undermines the traditional foundation of subordination and affects the dynamics of global labour law market. The second directions deals with the increasing use of artificial intelligence in the industrial environment that presents new legal and social issues, concerning both the replacement of standard work with robotics and the complementarity between human work and «non-human agents» work.

Accuracy Assessment of Different Digital Surface Models

Directory of Open Access Journals (Sweden)

Ugur Alganci

2018-03-01

Full Text Available Digital elevation models (DEMs, which can occur in the form of digital surface models (DSMs or digital terrain models (DTMs, are widely used as important geospatial information sources for various remote sensing applications, including the precise orthorectification of high-resolution satellite images, 3D spatial analyses, multi-criteria decision support systems, and deformation monitoring. The accuracy of DEMs has direct impacts on specific calculations and process chains; therefore, it is important to select the most appropriate DEM by considering the aim, accuracy requirement, and scale of each study. In this research, DSMs obtained from a variety of satellite sensors were compared to analyze their accuracy and performance. For this purpose, freely available Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER 30 m, Shuttle Radar Topography Mission (SRTM 30 m, and Advanced Land Observing Satellite (ALOS 30 m resolution DSM data were obtained. Additionally, 3 m and 1 m resolution DSMs were produced from tri-stereo images from the SPOT 6 and Pleiades high-resolution (PHR 1A satellites, respectively. Elevation reference data provided by the General Command of Mapping, the national mapping agency of Turkey—produced from 30 cm spatial resolution stereo aerial photos, with a 5 m grid spacing and ±3 m or better overall vertical accuracy at the 90% confidence interval (CI—were used to perform accuracy assessments. Gross errors and water surfaces were removed from the reference DSM. The relative accuracies of the different DSMs were tested using a different number of checkpoints determined by different methods. In the first method, 25 checkpoints were selected from bare lands to evaluate the accuracies of the DSMs on terrain surfaces. In the second method, 1000 randomly selected checkpoints were used to evaluate the methods’ accuracies for the whole study area. In addition to the control point approach, vertical cross

A model for measurement of noise in CCD digital-video cameras

International Nuclear Information System (INIS)

Irie, K; Woodhead, I M; McKinnon, A E; Unsworth, K

2008-01-01

This study presents a comprehensive measurement of CCD digital-video camera noise. Knowledge of noise detail within images or video streams allows for the development of more sophisticated algorithms for separating true image content from the noise generated in an image sensor. The robustness and performance of an image-processing algorithm is fundamentally limited by sensor noise. The individual noise sources present in CCD sensors are well understood, but there has been little literature on the development of a complete noise model for CCD digital-video cameras, incorporating the effects of quantization and demosaicing

Automatic Craniomaxillofacial Landmark Digitization via Segmentation-guided Partially-joint Regression Forest Model and Multi-scale Statistical Features

Science.gov (United States)

Zhang, Jun; Gao, Yaozong; Wang, Li; Tang, Zhen; Xia, James J.; Shen, Dinggang

2016-01-01

Objective The goal of this paper is to automatically digitize craniomaxillofacial (CMF) landmarks efficiently and accurately from cone-beam computed tomography (CBCT) images, by addressing the challenge caused by large morphological variations across patients and image artifacts of CBCT images. Methods We propose a Segmentation-guided Partially-joint Regression Forest (S-PRF) model to automatically digitize CMF landmarks. In this model, a regression voting strategy is first adopted to localize each landmark by aggregating evidences from context locations, thus potentially relieving the problem caused by image artifacts near the landmark. Second, CBCT image segmentation is utilized to remove uninformative voxels caused by morphological variations across patients. Third, a partially-joint model is further proposed to separately localize landmarks based on the coherence of landmark positions to improve the digitization reliability. In addition, we propose a fast vector quantization (VQ) method to extract high-level multi-scale statistical features to describe a voxel's appearance, which has low dimensionality, high efficiency, and is also invariant to the local inhomogeneity caused by artifacts. Results Mean digitization errors for 15 landmarks, in comparison to the ground truth, are all less than 2mm. Conclusion Our model has addressed challenges of both inter-patient morphological variations and imaging artifacts. Experiments on a CBCT dataset show that our approach achieves clinically acceptable accuracy for landmark digitalization. Significance Our automatic landmark digitization method can be used clinically to reduce the labor cost and also improve digitalization consistency. PMID:26625402

Awareness and Cognitive Load Levels of Teacher Candidates towards Student Products Made by Digital Storytelling

Science.gov (United States)

Kilic, Figen

2014-01-01

The purpose of this research is to assess the student products created by digital storytelling, and to determine the awareness towards learning the topic and the cognitive loads of students during the process. Research was performed with a total of 52 teacher candidates attending 2nd class at "Classroom Teacher" department of Mersin…

Digital Revolution and Innovative Business Models in Healthcare: Global Trends and Russian Realities.

Science.gov (United States)

Bereznoy, A V; Saygitov, R T

Digital revolution is one of the major global trends resulting in the unprecedented scale and depth of penetration of information and communication technologies into all sectors of national economy, including healthcare. The development of this trend brought about high expectations related to the improvement of quality of medical assistance, accessibility and economic efficiency of healthcare services. However, euphoria of the first steps of digital revolution is passing now, opening doors to more realistic analysis of opportunities and conditions of realization of the true potential hidden in the digital transformation of healthcare. More balanced perception of the peculiarities of innovation processes in the sector is coming together with understanding of the serious barriers, hampering implementation of the new ideas and practices due to complicated interweaving of social, economic, ethical and psychological factors. When taking into account the industry specifics it becomes evident that digital revolution cannot be a quick turnaround but rather would pass a number of phases and is likely to last more than one decade. In this context the article focuses on the prospects of the new business models, capable of making significant changes in today’s economic landscape of the sector (including uber-medicine, retail clinics, retainer medicine, network models of medical services). The authors also provide assessment of the current situation and perspectives of digital healthcare development in Russia.

DigitalHuman (DH): An Integrative Mathematical Model ofHuman Physiology

Science.gov (United States)

Hester, Robert L.; Summers, Richard L.; lIescu, Radu; Esters, Joyee; Coleman, Thomas G.

2010-01-01

Mathematical models and simulation are important tools in discovering the key causal relationships governing physiological processes and improving medical intervention when physiological complexity is a central issue. We have developed a model of integrative human physiology called DigitalHuman (DH) consisting of -5000 variables modeling human physiology describing cardiovascular, renal, respiratory, endocrine, neural and metabolic physiology. Users can view time-dependent solutions and interactively introduce perturbations by altering numerical parameters to investigate new hypotheses. The variables, parameters and quantitative relationships as well as all other model details are described in XML text files. All aspects of the model, including the mathematical equations describing the physiological processes are written in XML open source, text-readable files. Model structure is based upon empirical data of physiological responses documented within the peer-reviewed literature. The model can be used to understand proposed physiological mechanisms and physiological interactions that may not be otherwise intUitively evident. Some of the current uses of this model include the analyses of renal control of blood pressure, the central role of the liver in creating and maintaining insulin resistance, and the mechanisms causing orthostatic hypotension in astronauts. Additionally the open source aspect of the modeling environment allows any investigator to add detailed descriptions of human physiology to test new concepts. The model accurately predicts both qualitative and more importantly quantitative changes in clinically and experimentally observed responses. DigitalHuman provides scientists a modeling environment to understand the complex interactions of integrative physiology. This research was supported by.NIH HL 51971, NSF EPSCoR, and NASA

Northern Gulf 1 Arc-second NAVD 88 Coast Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) for select U.S. coastal regions in the Gulf of Mexico....

How much does it cost? The LIFE Project - Costing Models for Digital Curation and Preservation