Aggregate Production Planning, Casestudy in a Medium-sized Industry of the Rubber Production Line in Ecuador.

Science.gov (United States)

Rosero-Mantilla, César; Sánchez-Sailema, Mayra; Sánchez-Rosero, Carlos; Galleguillos-Pozo, Rosa

2017-06-01

This research aims to improve the productivity in the rubber line of a medium-sized industry by increasing the production capacities through the use of the Aggregate Production Planning model. For this purpose an analysis of the production processes of the line was made and the aggregate plan was defined evaluating two strategies: Exact Production Plan (Zero Inventory) and Constant Workforce Plan (Vary Inventory) by studying the costs of both inventory maintenance and workforce. It was also determined how the installed capacity was used with the standards of the rubber line and measures for decreasing production costs were proposed. It was proven that only 70% of the plant capacity was being used so it could be possible to produce more units and to obtain a bigger market for the products of this line.+

Product line design

Czech Academy of Sciences Publication Activity Database

Anderson, S. P.; Celik, Levent

2015-01-01

Roč. 157, May (2015), s. 517-526 ISSN 0022-0531 Institutional support: RVO:67985998 Keywords : product line design * product differentiation * second-degree price discrimination Subject RIV: AH - Economics Impact factor: 1.097, year: 2015

A Product Line Enhanced Unified Process

DEFF Research Database (Denmark)

Zhang, Weishan; Kunz, Thomas

2006-01-01

The Unified Process facilitates reuse for a single system, but falls short handling multiple similar products. In this paper we present an enhanced Unified Process, called UPEPL, integrating the product line technology in order to alleviate this problem. In UPEPL, the product line related activit...... activities are added and could be conducted side by side with other classical UP activities. In this way both the advantages of Unified Process and software product lines could co-exist in UPEPL. We show how to use UPEPL with an industrial mobile device product line in our case study....

Simulation Study of a Vehicle Production Line for Productivity Improvement

Directory of Open Access Journals (Sweden)

M.F.F. Ab Rashid

2015-06-01

Full Text Available This paper presents the study of a motorcycle frame production line in a particular company in Malaysia. Due to the high demand, the company needs to increase its production by at least 12% compared with current output. In order to improve productivity, the production-floor data was collected and simulated using the discrete event simulation approach. Later, a number of suggestions for improvement were simulated to identify the effect of the suggestions on productivity. In addition, cost analysis was also undertaken to identify the profit margin for a particular period of time for each suggestion. Simulation results indicate that there are three suggestions that are able to fulfill the 12% volume increment. In the short term, the suggestion to hire an assistant line leader will give instant effect to the profit. Meanwhile, for the medium term, Poka-yoke will give higher profit compared with the others, while in the long term, SOP (standard operating procedure implementation will yield a better profit margin. In future, the simulation of a dynamic demand model for this product is suggested to cope with new trends in the market.

Using Software Product Line to improve ERP Engineering: Literature Review and Analysis

Directory of Open Access Journals (Sweden)

Raúl Mazo

2014-10-01

Full Text Available On the one hand, getting advantages of Enterprise Resource Planning (ERP systems largely depends on their capacity to be configured and adapted to fit the customer and domain requirements. On the other hand, product line engineering (PLE is a promising approach for configuring and adapting products by means of configuration and derivation processes. While the literature and industrial experiences show the benefits of PLE methods, techniques and tools, there is still a lack of interest in addressing ERP engineering issues with the product line strategy. Objective: The aim of this paper is to identify and analyze the different ways presented in the literature to improve ERP engineering issues with the methods, techniques and tools provided by PLE. Method: To achieve that objective, we reviewed the literature and analyzed available publications. Results: This literature review analyzes six research papers at the intersection between ERP and PLE. It shows that the product line strategy can indeed be applied for ERP configuration and customization. It further shows the evolving interest on this topic and discusses existing contributions.

Product line design

Czech Academy of Sciences Publication Activity Database

Anderson, S. P.; Celik, Levent

2015-01-01

Roč. 157, May (2015), s. 517-526 ISSN 0022-0531 R&D Projects: GA ČR(CZ) GA15-22540S Institutional support: PRVOUK-P23 Keywords : product line design * product differentiation * second-degree price discrimination Subject RIV: AH - Economics Impact factor: 1.097, year: 2015

Systematic Derivation of Static Analyses for Software Product Lines

DEFF Research Database (Denmark)

Midtgaard, Jan; Brabrand, Claus; Wasowski, Andrzej

2014-01-01

A recent line of work lifts particular verification and analysis methods to Software Product Lines (SPL). In an effort to generalize such case-by-case approaches, we develop a systematic methodology for lifting program analyses to SPLs using abstract interpretation. Abstract interpretation...... for lifting analyses and Galois connections. We prove that for analyses developed using our method, the soundness of lifting follows by construction. Finally, we discuss approximating variability in an analysis and we derive variational data-flow equations for an example analysis, a constant propagation...

Change impact analysis for software product lines

Directory of Open Access Journals (Sweden)

Jihen Maâzoun

2016-10-01

Full Text Available A software product line (SPL represents a family of products in a given application domain. Each SPL is constructed to provide for the derivation of new products by covering a wide range of features in its domain. Nevertheless, over time, some domain features may become obsolete with the apparition of new features while others may become refined. Accordingly, the SPL must be maintained to account for the domain evolution. Such evolution requires a means for managing the impact of changes on the SPL models, including the feature model and design. This paper presents an automated method that analyzes feature model evolution, traces their impact on the SPL design, and offers a set of recommendations to ensure the consistency of both models. The proposed method defines a set of new metrics adapted to SPL evolution to identify the effort needed to maintain the SPL models consistently and with a quality as good as the original models. The method and its tool are illustrated through an example of an SPL in the Text Editing domain. In addition, they are experimentally evaluated in terms of both the quality of the maintained SPL models and the precision of the impact change management.

Total productive maintenance on example of automated foundry lines

Directory of Open Access Journals (Sweden)

S. Kukla

2009-07-01

Full Text Available Within framework of the presented study one has performed analysis of stoppages in automatic foundry lines operation, and basing on assumptions from complex maintenance system has undertaken himself to develop a service maintenance schedule for machinery installed in the line. Moreover, one has presented general assumptions of TPM system operated in conditions of series and multi-series production of cast iron castings. One has constructed operational database and has elaborated a list of line stoppage causes within a year. One has proposed a possibility of implementation of manufacturing systems modeling and simulating technique in management of production machinery operation in a foundry shop. Within framework of the simulation experiment one has developed schedules of production, schedules of maintenance and has forecasted indices of general productivity of the machinery for a various scenarios of events on example of casting line having in-series structure of operational reliability. In course of the study there was implemented ARENA universal software package to modeling and simulation of the manufacturing systems.

Production Time Loss Reduction in Sauce Production Line by Lean Six Sigma Approach

Science.gov (United States)

Ritprasertsri, Thitima; Chutima, Parames

2017-06-01

In all industries, time losses, which are incurred in processing are very important. As a result, losses are incurred in productivity and cost. This research aimed to reduce lost time that occurs in sauce production line by using the lean six sigma approach. The main objective was to reduce the time for heating sauce which causes a lot of time lost in the production line which affects productivity. The methodology was comprised of the five-phase improvement model of Six Sigma. This approach begins with defining phase, measuring phase, analysing phase, improving phase and controlling phase. Cause-and-effect matrix and failure mode and effect analysis (FMEA) were adopted to screen the factors which affect production time loss. The results showed that the percentage of lost time from heating sauce reduced by 47.76%. This increased productivity to meet the plan.

Supporting Development of Satellite's Guidance Navigation and Control Software: A Product Line Approach

Science.gov (United States)

McComas, David; Stark, Michael; Leake, Stephen; White, Michael; Morisio, Maurizio; Travassos, Guilherme H.; Powers, Edward I. (Technical Monitor)

2000-01-01

The NASA Goddard Space Flight Center Flight Software Branch (FSB) is developing a Guidance, Navigation, and Control (GNC) Flight Software (FSW) product line. The demand for increasingly more complex flight software in less time while maintaining the same level of quality has motivated us to look for better FSW development strategies. The GNC FSW product line has been planned to address the core GNC FSW functionality very similar on many recent low/near Earth missions in the last ten years. Unfortunately these missions have not accomplished significant drops in development cost since a systematic approach towards reuse has not been adopted. In addition, new demands are continually being placed upon the FSW which means the FSB must become more adept at providing GNC FSW functionality's core so it can accommodate additional requirements. These domain features together with engineering concepts are influencing the specification, description and evaluation of FSW product line. Domain engineering is the foundation for emerging product line software development approaches. A product line is 'A family of products designed to take advantage of their common aspects and predicted variabilities'. In our product line approach, domain engineering includes the engineering activities needed to produce reusable artifacts for a domain. Application engineering refers to developing an application in the domain starting from reusable artifacts. The focus of this paper is regarding the software process, lessons learned and on how the GNC FSW product line manages variability. Existing domain engineering approaches do not enforce any specific notation for domain analysis or commonality and variability analysis. Usually, natural language text is the preferred tool. The advantage is the flexibility and adapt ability of natural language. However, one has to be ready to accept also its well-known drawbacks, such as ambiguity, inconsistency, and contradictions. While most domain analysis

Product Line Rivalry with Brand Differentiation

OpenAIRE

Gilbert, Richard J.; Matutes, Carmen

1989-01-01

Competition with product rivalry is examined in a model where products are differentiated by both quality and brand name. With no commitment, firms produce a full product line. When firms can commit to restrict their product offerings, firms specialize if the degree of brand-specific differentiation is small and they produce a full product line if brand-specific differentiation is large relative to intrafirm differentiation. Firms may crowd a product space when all competitors would be better...

EXERGY ANALYSIS OF PRODUCTION LINE CANDIED FRUIT

Directory of Open Access Journals (Sweden)

V. D. Dem'шanov

2014-01-01

Full Text Available Summary. The task of exergy analysis - evaluation based on the second law of thermodynamics, thermodynamic degree of technical perfection of the whole system, as well as to identify those stages of a technical process, which contains the bulk of the loss of exergy in order to improve its efficiency. Using exergy analysis allows to solve a wide range of technical problems on the basis of a unified thermodynamic methods. Exergy analysis was performed by the method whereby thermotechnological system candied fruit production, conventionally separated from the environment of the closed control surface. Exchange scheme under consideration thermotechnological candied fruit production material, thermal and energy flows to the environment, as well as between the control surfaces. Exergy in external input material streams: air and water and citric acid, as well as output streams without having increment Shih-exergy in the process of passing through the reference surface - of running air-water and after washing, are in thermodynamic equilibrium with the surroundings is zero. In the total number of internal exergy losses include losses from the final result of the temperature difference in the heat exchange between the raw material to be dried and heated air electromechanical arising from irreversible alteration of structural and mechanical properties of the product, and the hydraulic loss due to the sudden increase of the specific volume of air as it enters the working chamber dryer. The resulting exergy efficiency is 8.87 %, which is 3.7 % higher than when using the technology of the prototype based on solar air-dried product. This indicates an increase in the degree of perfection of the thermodynamic system by using microwave heating of the product in combination with the removal of moisture in the atmosphere low temperature coolant, which precludes significant outside exergy loss on drying step.

Aspect-Oriented Model-Driven Software Product Line Engineering

Science.gov (United States)

Groher, Iris; Voelter, Markus

Software product line engineering aims to reduce development time, effort, cost, and complexity by taking advantage of the commonality within a portfolio of similar products. The effectiveness of a software product line approach directly depends on how well feature variability within the portfolio is implemented and managed throughout the development lifecycle, from early analysis through maintenance and evolution. This article presents an approach that facilitates variability implementation, management, and tracing by integrating model-driven and aspect-oriented software development. Features are separated in models and composed of aspect-oriented composition techniques on model level. Model transformations support the transition from problem to solution space models. Aspect-oriented techniques enable the explicit expression and modularization of variability on model, template, and code level. The presented concepts are illustrated with a case study of a home automation system.

Optimization and Improvement of Test Processes on a Production Line

Science.gov (United States)

Sujová, Erika; Čierna, Helena

2018-06-01

The paper deals with increasing processes efficiency at a production line of cylinder heads of engines in a production company operating in the automotive industry. The goal is to achieve improvement and optimization of test processes on a production line. It analyzes options for improving capacity, availability and productivity of processes of an output test by using modern technology available on the market. We have focused on analysis of operation times before and after optimization of test processes at specific production sections. By analyzing measured results we have determined differences in time before and after improvement of the process. We have determined a coefficient of efficiency OEE and by comparing outputs we have confirmed real improvement of the process of the output test of cylinder heads.

Analysis of cell line variation in biochemical production of protoporphyrin IX

Science.gov (United States)

Gibbs, Summer L.; Chen, Bin; O'Hara, Julia A.; Hoopes, P. Jack; Hasan, Tayyaba; Pogue, Brian W.

2006-02-01

Protoporphyrin IX (PpIX) is produced via the heme synthesis pathway by the cell following administration of aminolevulinic acid (ALA). ALA synthase, the enzyme that produces ALA in the cell from glycine and succinyl-coenzyme A, is inhibited in a feedback mechanism by heme and thus is the rate limiting enzyme in the heme synthesis pathway. Since ALA is administered systemically, the rate limiting step that naturally exists in the cells is bypassed, however it is currently unclear why cells have different rate limiting steps in the ALA-PpIX synthesis pathway, and more specifically which types of cancer cells are most productive. It has been determined that when the same amount of ALA is administered to a wide panel of cancer cells in vitro that vastly differing amounts of PpIX are produced. The steps for the ALA-PpIX pathway occur in and around the mitochondria of the cell, but interestingly no correlation is seen between PpIX production and mitochondrial content of the cell, following ALA administration. However, total cell area shows positive correlation with PpIX production. Administration of the iron chelator, 1,2-dimethyl-3-hydroxy-4-pyridone (L1) in combination with ALA allows the final step in the heme synthesis pathway, conversion of PpIX to heme, to be delayed and thus increases the detectable amount of PpIX in each cell line. The cell lines that have the lowest PpIX production following administration of ALA alone show the largest increase in production following the combined administration of ALA and L1. PpIX fluorescence is thought to be a measure of cellular activity and the goal of the current study was to determine which cell lines would be the most promising targets for fluorescence detection or monitoring response to therapy. The results indicate that the cells with larger size and larger numbers of mitochondria may be good potential targets for this therapy. While this conclusion may appear obvious, it is not universally true, and cellular specific

Sustainable evolution of product line infrastructure code

OpenAIRE

Patzke, T.

2011-01-01

A major goal in many software development organizations today is to reduce development effort and cost, while improving their products' quality and diversity by developing reusable software. An organization takes advantage of its products' similarities, exploits what they have in common and manages what varies among them by building a product line infrastructure. A product line infrastructure is a reuse repository that contains exactly those common and variable artifacts, such as requirements...

production lines

Directory of Open Access Journals (Sweden)

Jingshan Li

2000-01-01

Full Text Available In this work, serial production lines with finished goods buffers operating in the pull regime are considered. The machines are assumed to obey Bernoulli reliability model. The problem of satisfying customers demand is addressed. The level of demand satisfaction is quantified by the due-time performance (DTP, which is defined as the probability to ship to the customer a required number of parts during a fixed time interval. Within this scenario, the definitions of DTP bottlenecks are introduced and a method for their identification is developed.

Harnessing natural product assembly lines: structure, promiscuity, and engineering.

Science.gov (United States)

Ladner, Christopher C; Williams, Gavin J

2016-03-01

Many therapeutically relevant natural products are biosynthesized by the action of giant mega-enzyme assembly lines. By leveraging the specificity, promiscuity, and modularity of assembly lines, a variety of strategies has been developed that enables the biosynthesis of modified natural products. This review briefly summarizes recent structural advances related to natural product assembly lines, discusses chemical approaches to probing assembly line structures in the absence of traditional biophysical data, and surveys efforts that harness the inherent or engineered promiscuity of assembly lines for the synthesis of non-natural polyketides and non-ribosomal peptide analogues.

'PSA-SPN' - A Parameter Sensitivity Analysis Method Using Stochastic Petri Nets: Application to a Production Line System

International Nuclear Information System (INIS)

Labadi, Karim; Saggadi, Samira; Amodeo, Lionel

2009-01-01

The dynamic behavior of a discrete event dynamic system can be significantly affected for some uncertain changes in its decision parameters. So, parameter sensitivity analysis would be a useful way in studying the effects of these changes on the system performance. In the past, the sensitivity analysis approaches are frequently based on simulation models. In recent years, formal methods based on stochastic process including Markov process are proposed in the literature. In this paper, we are interested in the parameter sensitivity analysis of discrete event dynamic systems by using stochastic Petri nets models as a tool for modelling and performance evaluation. A sensitivity analysis approach based on stochastic Petri nets, called PSA-SPN method, will be proposed with an application to a production line system.

Preparing for Automated Derivation of Products in a Software Product Line

National Research Council Canada - National Science Library

McGregor, John D

2005-01-01

... to bring a product to market, or through other production improvements. Business goals such as these make automated product derivation an appealing strategy to a software product line organization...

Semi-on-line analysis for fast and precise monitoring of bioreaction processes

DEFF Research Database (Denmark)

Christensen, L.H.; Marcher, J.; Schulze, Ulrik

1996-01-01

Monitoring of substrates and products during fermentation processes can be achieved either by on-line, in situ sensors or by semi-on-line analysis consisting of an automatic sampling step followed by an ex situ analysis of the retrieved sample. The potential risk of introducing time delays...

Security Requirements Management in Software Product Line Engineering

Science.gov (United States)

Mellado, Daniel; Fernández-Medina, Eduardo; Piattini, Mario

Security requirements engineering is both a central task and a critical success factor in product line development due to the complexity and extensive nature of product lines. However, most of the current product line practices in requirements engineering do not adequately address security requirements engineering. Therefore, in this chapter we will propose a security requirements engineering process (SREPPLine) driven by security standards and based on a security requirements decision model along with a security variability model to manage the variability of the artefacts related to security requirements. The aim of this approach is to deal with security requirements from the early stages of the product line development in a systematic way, in order to facilitate conformance with the most relevant security standards with regard to the management of security requirements, such as ISO/IEC 27001 and ISO/IEC 15408.

Sustained productivity in recombinant Chinese Hamster Ovary (CHO) cell lines: proteome analysis of the molecular basis for a process-related phenotype

LENUS (Irish Health Repository)

Meleady, Paula

2011-07-24

Abstract Background The ability of mammalian cell lines to sustain cell specific productivity (Qp) over the full duration of bioprocess culture is a highly desirable phenotype, but the molecular basis for sustainable productivity has not been previously investigated in detail. In order to identify proteins that may be associated with a sustained productivity phenotype, we have conducted a proteomic profiling analysis of two matched pairs of monoclonal antibody-producing Chinese hamster ovary (CHO) cell lines that differ in their ability to sustain productivity over a 10 day fed-batch culture. Results Proteomic profiling of inherent differences between the two sets of comparators using 2D-DIGE (Difference Gel Electrophoresis) and LC-MS\\/MS resulted in the identification of 89 distinct differentially expressed proteins. Overlap comparisons between the two sets of cell line pairs identified 12 proteins (AKRIB8, ANXA1, ANXA4, EIF3I, G6PD, HSPA8, HSP90B1, HSPD1, NUDC, PGAM1, RUVBL1 and CNN3) that were differentially expressed in the same direction. Conclusion These proteins may have an important role in sustaining high productivity of recombinant protein over the duration of a fed-batch bioprocess culture. It is possible that many of these proteins could be useful for future approaches to successfully manipulate or engineer CHO cells in order to sustain productivity of recombinant protein.

Strategic production line synchronisation

Directory of Open Access Journals (Sweden)

Hattingh, Teresa

2016-08-01

Full Text Available A study was conducted at the sole global producer of suspension struts for a particular vehicle manufacturer. This supplier is currently able to meet customer demand. However, it does so because of a large finished goods and work-in-progress (WIP inventory. The plant operates two production processes that are separated by a large buffer of WIP, which essentially decouples the production processes. This study aimed to reduce this WIP buffer; this would require the processes to become synchronised, bearing in mind that the reliability of delivery should not decrease. A tool that considers time, quality, and machine capacity was developed to assess the impact of line synchronisation on company performance figures. It was found that line synchronisation produced several benefits for the supplier, including batch size reduction, lower inventory levels, and associated shorter lead times. This further allowed the supplier to improve flow in the plant by introducing a pull system. Improved visual oversight could lead to further improved problem-solving and innovation.

Developing Green Line Products

DEFF Research Database (Denmark)

Muñoz-Marin, Ana Maria; Lassen, Astrid Heidemann; Poulsen, Søren Bolvig

2011-01-01

This publication is based on the Master thesis “User-driven ecoinnovation process: Towards the implementation of the Green product line at JELD-WEN” written by Ana Maria Muñoz-Marin as her Graduation Project for the MSc. Global Innovation Management degree. The company-based experiment was carried...

Quantitative Analysis of Probabilistic Models of Software Product Lines with Statistical Model Checking

DEFF Research Database (Denmark)

ter Beek, Maurice H.; Legay, Axel; Lluch Lafuente, Alberto

2015-01-01

We investigate the suitability of statistical model checking techniques for analysing quantitative properties of software product line models with probabilistic aspects. For this purpose, we enrich the feature-oriented language FLAN with action rates, which specify the likelihood of exhibiting pa...

Critical care medicine as a distinct product line with substantial financial profitability: the role of business planning.

Science.gov (United States)

Bekes, Carolyn E; Dellinger, R Phillip; Brooks, Daniel; Edmondson, Robert; Olivia, Christopher T; Parrillo, Joseph E

2004-05-01

As academic health centers face increasing financial pressures, they have adopted a more businesslike approach to planning, particularly for discrete "product" or clinical service lines. Since critical care typically has been viewed as a service provided by a hospital, and not a product line, business plans have not historically been developed to expand and promote critical care. The major focus when examining the finances of critical care has been cost reduction, not business development. We hypothesized that a critical care business plan can be developed and analyzed like other more typical product lines and that such a critical care product line can be profitable for an institution. In-depth analysis of critical care including business planning for critical care services. Regional academic health center in southern New Jersey. None. As part of an overall business planning process directed by the Board of Trustees, the critical care product line was identified by isolating revenue, expenses, and profitability associated with critical care patients. We were able to identify the major sources ("value chain") of critical care patients: the emergency room, patients who are admitted for other problems but spend time in a critical care unit, and patients transferred to our intensive care units from other hospitals. The greatest opportunity to expand the product line comes from increasing the referrals from other hospitals. A methodology was developed to identify the revenue and expenses associated with critical care, based on the analysis of past experience. With this model, we were able to demonstrate a positive contribution margin of dollar 7 million per year related to patients transferred to the institution primarily for critical care services. This can be seen as the profit related to the product line segment of critical care. There was an additional positive contribution margin of dollar 5.8 million attributed to the critical care portion of the hospital stay of

The Influence of Physical Fatigue on Work on a Production Line

Directory of Open Access Journals (Sweden)

Kołodziej Sabina

2017-09-01

Full Text Available The purpose of this study is to determine the factors having impacts on the physical fatigue of employees and to analyse its influence on work on a production line. In order to carry out these objectives, a comprehensive research was conducted in a medium enterprise producing processed fruit and vegetable products. Air temperature and humidity tests, employee survey, production line productivity measurements, and other observations were performed. Large variations in temperature and humidity were observed during the analysed period. Analysing the survey results, attention was paid to the declared length of sleeping of employees after each shift, the time when they feel fatigue and the factors that, according to respondents, have the greatest impact on the work performed. Attempts were made to determine the wellbeing of employees and to indicate the disturbing symptoms. Special attention was paid to the negative phenomena felt by respondents. The main factors affecting the physical fatigue of employees were identified and described. We sought to explain the impacts of physical fatigue on work on the production line. Improvements, which should help to reduce fatigue and improve working conditions, have been proposed. The analysis provided interesting information that could be used in various food manufacturing companies.

On-line Analysis of Catalytic Reaction Products Using a High-Pressure Tandem Micro-reactor GC/MS.

Science.gov (United States)

Watanabe, Atsushi; Kim, Young-Min; Hosaka, Akihiko; Watanabe, Chuichi; Teramae, Norio; Ohtani, Hajime; Kim, Seungdo; Park, Young-Kwon; Wang, Kaige; Freeman, Robert R

2017-01-01

When a GC/MS system is coupled with a pressurized reactor, the separation efficiency and the retention time are directly affected by the reactor pressure. To keep the GC column flow rate constant irrespective of the reaction pressure, a restrictor capillary tube and an open split interface are attached between the GC injection port and the head of a GC separation column. The capability of the attached modules is demonstrated for the on-line GC/MS analysis of catalytic reaction products of a bio-oil model sample (guaiacol), produced under a pressure of 1 to 3 MPa.

Simulation and optimization of logistics distribution for an engine production line

Energy Technology Data Exchange (ETDEWEB)

Song, L.; Jin, S.; Tang, P.

2016-07-01

In order to analyze and study the factors about Logistics distribution system, solve the problems of out of stock on the production line and improve the efficiency of the assembly line. Using the method of industrial engineering, put forward the optimization scheme of distribution system. The simulation model of logistics distribution system for engine assembly line was build based on Witness software. The optimization plan is efficient to improve Logistics distribution efficiency, production of assembly line efficiency and reduce the storage of production line. Based on the study of the modeling and simulation of engine production logistics distribution system, the result reflects some influence factors about production logistics system, which has reference value to improving the efficiency of the production line. (Author)

The Structured Intuitive Model for Product Line Economics (SIMPLE)

National Research Council Canada - National Science Library

Clements, Paul C; McGregor, John D; Cohen, Sholom G

2005-01-01

.... This report presents the Structured Intuitive Model of Product Line Economics (SIMPLE), a general-purpose business model that supports the estimation of the costs and benefits in a product line development organization...

Statistical Model Checking for Product Lines

DEFF Research Database (Denmark)

ter Beek, Maurice H.; Legay, Axel; Lluch Lafuente, Alberto

2016-01-01

average cost of products (in terms of the attributes of the products’ features) and the probability of features to be (un)installed at runtime. The product lines must be modelled in QFLan, which extends the probabilistic feature-oriented language PFLan with novel quantitative constraints among features...

Safety in the design of production lines

DEFF Research Database (Denmark)

Dyhrberg, Mette Bang; Broberg, Ole; Jacobsen, Peter

2006-01-01

This paper is a case study report on how safety considerations were handled in the process of redesigning a production line. The design process was characterized as a specification and negotiation process between engineers from the company and the supplier organization. The new production line...... in the specification material nor in their face-to-face meetings with the supplier. Safety aspects were not part of their work practice. On this basis, it was suggested that formal guidelines or procedures for integrating safety in the design of production lines would have no effect. Instead, the researchers set up...... became safer, but not as a result of any intentional plan to integrate safety aspects into the design process. Instead, the supplier’s design of a new piece of equipment had a higher built-in safety level. The engineering team in the company was aware of the importance of safety aspects neither...

Safety in the redesigning of production lines

DEFF Research Database (Denmark)

Dyhrberg, Mette Bang; Broberg, Ole; Jacobsen, Peter

2006-01-01

This paper is a case study report on how safety considerations were handled in the process of redesigning a production line. The design process was characterized as a specification and negotiation process between engineers from the company and the supplier organization. The new production line...... became safer, but not as a result of any intentional plan to integrate safety aspects into the design process. Instead, the supplier’s design of a new piece of equipment had a higher built-in safety level. The engineering team in the company was aware of the importance of safety aspects neither...... in the specification material nor in their face-to-face meetings with the supplier. Safety aspects were not part of their work practice. On this basis, it was suggested that formal guidelines or procedures for integrating safety in the design of production lines would have no effect. Instead, the researchers set up...

Simulation and optimization of logistics distribution for an engine production line

Directory of Open Access Journals (Sweden)

Lijun Song

2016-02-01

Full Text Available Purpose: In order to analyze and study the factors about Logistics distribution system, solve the problems of out of stock on the production line and improve the efficiency of the assembly line. Design/methodology/approach: Using the method of industrial engineering, put forward the optimization scheme of distribution system. The simulation model of logistics distribution system for engine assembly line was build based on Witness software. Findings: The optimization plan is efficient to improve Logistics distribution efficiency, production of assembly line efficiency and reduce the storage of production line Originality/value: Based on the study of the modeling and simulation of engine production logistics distribution system, the result reflects some influence factors about production logistics system, which has reference value to improving the efficiency of the production line.

Multi-objective Analysis for a Sequencing Planning of Mixed-model Assembly Line

Science.gov (United States)

Shimizu, Yoshiaki; Waki, Toshiya; Yoo, Jae Kyu

Diversified customer demands are raising importance of just-in-time and agile manufacturing much more than before. Accordingly, introduction of mixed-model assembly lines becomes popular to realize the small-lot-multi-kinds production. Since it produces various kinds on the same assembly line, a rational management is of special importance. With this point of view, this study focuses on a sequencing problem of mixed-model assembly line including a paint line as its preceding process. By taking into account the paint line together, reducing work-in-process (WIP) inventory between these heterogeneous lines becomes a major concern of the sequencing problem besides improving production efficiency. Finally, we have formulated the sequencing problem as a bi-objective optimization problem to prevent various line stoppages, and to reduce the volume of WIP inventory simultaneously. Then we have proposed a practical method for the multi-objective analysis. For this purpose, we applied the weighting method to derive the Pareto front. Actually, the resulting problem is solved by a meta-heuristic method like SA (Simulated Annealing). Through numerical experiments, we verified the validity of the proposed approach, and discussed the significance of trade-off analysis between the conflicting objectives.

Share-of-Surplus Product Line Optimisation with Price Levels

Directory of Open Access Journals (Sweden)

X. G. Luo

2014-01-01

Full Text Available Kraus and Yano (2003 established the share-of-surplus product line optimisation model and developed a heuristic procedure for this nonlinear mixed-integer optimisation model. In their model, price of a product is defined as a continuous decision variable. However, because product line optimisation is a planning process in the early stage of product development, pricing decisions usually are not very precise. In this research, a nonlinear integer programming share-of-surplus product line optimization model that allows the selection of candidate price levels for products is established. The model is further transformed into an equivalent linear mixed-integer optimisation model by applying linearisation techniques. Experimental results in different market scenarios show that the computation time of the transformed model is much less than that of the original model.

The rationalization of desulfurization by on-line analysis

Energy Technology Data Exchange (ETDEWEB)

Murakami, Y; Kohmura, S; Taketomi, H; Matsumura, S; Sasaki, Y

1986-01-01

Nippon Kokan uses the Takahax and Sulfiban processes for the desulfurization of coke oven gas. The authors outline the Sulfiban Process and describe a recently developed system for the on-line determination of H/sub 2/S in coke oven gas, and of CO/sub 2/ and monoethanolamine (MEA) in the wash oil. This new on-line analysis system has proved effective in rationalizing the Sulfiban Process via lower MEA production costs and decreased power consumption. The introduction of a computerized control system is now being studied. 7 figs., 4 tabs.

The degradation of lining of rotary furnaces in the production of zinc oxide

Directory of Open Access Journals (Sweden)

Natália Luptáková

2014-06-01

Full Text Available This paper is closely connected with the complex problem of degradation relating to the refractories of rotary furnace linings in the production of zinc oxide. Zinc oxide can be produced by variety of ways, but the most common method of production which is used in Europe is indirect, i.e. pyrolytic combustion of zinc. This method is also called "French process" of manufacturing ZnO. But this mentioned method of preparation leads to the creation of the enormous amount of zinc slag including chemical complexes of elements Fe, Zn and Al. The mechanism of degradation of the lining leads to slag rests and it is closely connected with the mutual interaction of the aggressive agents with the components of the lining. This process creates a new undesired surface layer which increased the overall thickness of zinc slag. Stuck slag has the influence on rapid degradation of the linings and moreover it also decreases the production quality of ZnO. Analysis results introduced in this paper are significant information for minimizing of degradation of rotary furnaces.  

Synergy between Software Product Line and Intelligent Mobile Middleware

DEFF Research Database (Denmark)

Zhang, Weishan; Hansen, Klaus Marius

2007-01-01

with OWL ontology reasoning enhanced BDI (belief-desire-intention) agents in an ongoing research project called PLIMM (product line enabled intelligent mobile middleware), in which Frame based software product line techniques are applied. Besides the advantages of a software product line, our approach can...... handle ontology evolution and keep all related assets in a consistent state. Ontology evolution is a problem that has not been addressed by current mobile middleware. Another advantage is the ability to configure Jadex BDI agents for different purpose and enhance agent intelligence by adding logic...

Peptidomic analysis of human cell lines

Science.gov (United States)

Gelman, Julia S.; Sironi, Juan; Castro, Leandro M.; Ferro, Emer S.; Fricker, Lloyd D.

2011-01-01

Peptides have been proposed to function in intracellular signaling within the cytosol. Although cytosolic peptides are considered to be highly unstable, a large number of peptides have been detected in mouse brain and other biological samples. In the present study, we evaluated the peptidome of three diverse cell lines: SH-SY5Y, MCF7, and HEK293 cells. A comparison of the peptidomes revealed considerable overlap in the identity of the peptides found in each cell line. The majority of the observed peptides are not derived from the most abundant or least stable proteins in the cell, and approximately half of the cellular peptides correspond to the N- or C- termini of the precursor proteins. Cleavage site analysis revealed a preference for hydrophobic residues in the P1 position. Quantitative peptidomic analysis indicated that the levels of most cellular peptides are not altered in response to elevated intracellular calcium, suggesting that calpain is not responsible for their production. The similarity of the peptidomes of the three cell lines and the lack of correlation with the predicted cellular degradome implies the selective formation or retention of these peptides, consistent with the hypothesis that they are functional in the cells. PMID:21204522

A Software Product Line Vision for Defense Acquisition

National Research Council Canada - National Science Library

Campbell, Grady

2002-01-01

Experience in industry and government over the last 10 years has shown that a software product line approach can significantly improve productivity and product quality, facilitate change, and reduce life-cycle costs...

Technology Management within Product Lines in High Technology Markets

Science.gov (United States)

Sarangee, Kumar R.

2009-01-01

Understanding the nuances of product line management has been of great interest to business scholars and practitioners. This assumes greater significance for firms conducting business in technologically dynamic industries, where they face certain challenges regarding the management of multiple, overlapping technologies within their product lines.…

A SOFTWARE PRODUCT LINE FOR ENERGY-EFFICIENT CONTROL OF SUPPLEMENTARY LIGHTING IN GREENHOUSES

DEFF Research Database (Denmark)

Mærsk-Møller, Hans Martin; Jørgensen, Bo Nørregaard

2011-01-01

of 2009 – 2010 showed 25 percent savings with no negative effect on plant quality. To accelerate the impact of our approach, we chose to use Software Product Line Engineering, as it enables a greater variety of related software tools to be created faster. We have created a web-based analysis tool, Dyna...... preserving production quality. This paper presents a novel approach addressing this issue. We use weather forecasts and electricity prices to compute cost- and energy-efficient supplementary light plans that achieve the required plant growth defined by the grower. Experiments performed during the winter...... of these two tools is described together with the lessons learned from using Software Product Line Engineering in the domain of greenhouse software development....

Lean buffering in serial production lines with Bernoulli machines

Directory of Open Access Journals (Sweden)

A. B. Hu

2006-01-01

Full Text Available Lean buffering is the smallest buffer capacity necessary to ensure the desired production rate of a manufacturing system. In this paper, analytical methods for selecting lean buffering in serial production lines are developed under the assumption that the machines obey the Bernoulli reliability model. Both closed-form expressions and recursive approaches are investigated. The cases of identical and nonidentical machines are analyzed. Results obtained can be useful for production line designers and production managers to maintain the required production rate with the smallest possible inventories.

Generation and functional analysis of T cell lines and clones specific for schistosomula released products (SRP-A).

Science.gov (United States)

Damonneville, M; Velge, F; Verwaerde, C; Pestel, J; Auriault, C; Capron, A

1987-08-01

Antigens present in the products released by the larval stage of schistosome (SRP-A) were shown to induce a strong cytotoxic and protective IgE response both in the rat and the monkey. T cell lines and clones specific for SRP-A or 26 kD antigens which are the main target of the cytotoxic IgE have been derived. The passive transfer of SRP-A specific T lymphocytes into infected rats led to an increase of the IgE response, conferring a significant level of protection to the rats. In coculture assays in vitro, these cell lines significantly enhanced the production of IgE by SRP-A sensitized rat spleen cells. This helper effect on the IgE response was confirmed with 26 kD T cell clone supernatants. Moreover, supernatants obtained after stimulation with phorbol myristate acetate were able to enhance the IgE production of a hybridoma B cell line (B48-14) producing a monoclonal IgE antibody, cytotoxic for the schistosomula.

Resolving traceability issues of product derivation for software product lines

OpenAIRE

Abid, Saad bin

2009-01-01

peer-reviewed Dealing with traceability management issues during model based product derivation in large complex industrial SPL is error prone due to the lack of tool support. As a result traceability management between connected models emerges as an important research topic. In this position paper, we discuss research challenges as scenarios from developed example product line and give recommendations on resolving traceability issues during product derivation. We also discuss initial idea...

On-line monitoring of solar cell module production by ellipsometry technique

International Nuclear Information System (INIS)

Fried, M.

2014-01-01

Non-destructive analyzing tools are needed at all stages of thin film photovoltaic (PV) development, and on production lines. In thin film PV, layer thicknesses, micro-structure, composition, layer optical properties, and their uniformity (because each elementary cell is connected electrically in series within a big panel) serve as an important starting point in the evaluation of the performance of the cell or module. An important focus is to express the dielectric functions of each component material in terms of a handful of wavelength independent parameters whose variation can cover all process variants of that material. With the resulting database, spectroscopic ellipsometry coupled with multilayer analysis can be developed for on-line point-by-point mapping and on-line line-by-line imaging. This work tries to review the investigations of different types of PV-layers (anti-reflective coating, transparent-conductive oxide (TCO), multi-diode-structure, absorber and window layers) showing the existing dielectric function databases for the thin film components of CdTe, CuInGaSe 2 , thin Si, and TCO layers. Off-line point-by-point mapping can be effective for characterization of non-uniformities in full scale PV panels in developing labs but it is slow in the on-line mode when only 15 points can be obtained (within 1 min) as a 120 cm long panel moves by the mapping station. In the last years [M. Fried et al., Thin Solid Films 519, 2730 (2011)], instrumentation was developed that provides a line image of spectroscopic ellipsometry (wl = 350–1000 nm) data. Up to now a single 30 point line image can be collected in 10 s over a 15 cm width of PV material. This year we are building a 30 and a 60 cm width expanded beam ellipsometer the speed of which will be increased by 10 ×. Then 1800 points can be mapped in a 1 min traverse of a 60 ∗ 120 cm PV panel or flexible roll-to-roll substrate. - Highlights: • Instrumentation developed provides a line image of

On-line monitoring of solar cell module production by ellipsometry technique

Energy Technology Data Exchange (ETDEWEB)

Fried, M., E-mail: fried@mfa.kfki.hu

2014-11-28

Non-destructive analyzing tools are needed at all stages of thin film photovoltaic (PV) development, and on production lines. In thin film PV, layer thicknesses, micro-structure, composition, layer optical properties, and their uniformity (because each elementary cell is connected electrically in series within a big panel) serve as an important starting point in the evaluation of the performance of the cell or module. An important focus is to express the dielectric functions of each component material in terms of a handful of wavelength independent parameters whose variation can cover all process variants of that material. With the resulting database, spectroscopic ellipsometry coupled with multilayer analysis can be developed for on-line point-by-point mapping and on-line line-by-line imaging. This work tries to review the investigations of different types of PV-layers (anti-reflective coating, transparent-conductive oxide (TCO), multi-diode-structure, absorber and window layers) showing the existing dielectric function databases for the thin film components of CdTe, CuInGaSe{sub 2}, thin Si, and TCO layers. Off-line point-by-point mapping can be effective for characterization of non-uniformities in full scale PV panels in developing labs but it is slow in the on-line mode when only 15 points can be obtained (within 1 min) as a 120 cm long panel moves by the mapping station. In the last years [M. Fried et al., Thin Solid Films 519, 2730 (2011)], instrumentation was developed that provides a line image of spectroscopic ellipsometry (wl = 350–1000 nm) data. Up to now a single 30 point line image can be collected in 10 s over a 15 cm width of PV material. This year we are building a 30 and a 60 cm width expanded beam ellipsometer the speed of which will be increased by 10 ×. Then 1800 points can be mapped in a 1 min traverse of a 60 ∗ 120 cm PV panel or flexible roll-to-roll substrate. - Highlights: • Instrumentation developed provides a line image of

A first-generation software product line for data acquisition systems in astronomy

Science.gov (United States)

López-Ruiz, J. C.; Heradio, Rubén; Cerrada Somolinos, José Antonio; Coz Fernandez, José Ramón; López Ramos, Pablo

2008-07-01

This article presents a case study on developing a software product line for data acquisition systems in astronomy based on the Exemplar Driven Development methodology and the Exemplar Flexibilization Language tool. The main strategies to build the software product line are based on the domain commonality and variability, the incremental scope and the use of existing artifacts. It consists on a lean methodology with little impact on the organization, suitable for small projects, which reduces product line start-up time. Software Product Lines focuses on creating a family of products instead of individual products. This approach has spectacular benefits on reducing the time to market, maintaining the know-how, reducing the development costs and increasing the quality of new products. The maintenance of the products is also enhanced since all the data acquisition systems share the same product line architecture.

EVo: Net Shape RTM Production Line

Directory of Open Access Journals (Sweden)

Sven Torstrick

2016-04-01

Full Text Available EVo research platform is operated by the Center for Lightweight-Production-Technology of the German Aerospace Center in Stade. Its objective is technology demonstration of a fully automated RTM (Resin Transfer Molding production line for composite parts in large quantities. Process steps include cutting and ply handling, draping, stacking, hot-forming, preform-trimming to net shape, resin injection, curing and demolding.

Generation and functional analysis of T cell lines and clones specific for schistosomula released products (SRP-A).

Science.gov (United States)

Damonneville, M; Velge, F; Verwaerde, C; Pestel, J; Auriault, C; Capron, A

1987-01-01

Antigens present in the products released by the larval stage of schistosome (SRP-A) were shown to induce a strong cytotoxic and protective IgE response both in the rat and the monkey. T cell lines and clones specific for SRP-A or 26 kD antigens which are the main target of the cytotoxic IgE have been derived. The passive transfer of SRP-A specific T lymphocytes into infected rats led to an increase of the IgE response, conferring a significant level of protection to the rats. In coculture assays in vitro, these cell lines significantly enhanced the production of IgE by SRP-A sensitized rat spleen cells. This helper effect on the IgE response was confirmed with 26 kD T cell clone supernatants. Moreover, supernatants obtained after stimulation with phorbol myristate acetate were able to enhance the IgE production of a hybridoma B cell line (B48-14) producing a monoclonal IgE antibody, cytotoxic for the schistosomula. PMID:3498590

Flow cytometric analysis of microbial contamination in food industry technological lines--initial study.

Science.gov (United States)

Józwa, Wojciech; Czaczyk, Katarzyna

2012-04-02

Flow cytometry constitutes an alternative for traditional methods of microorganisms identification and analysis, including methods requiring cultivation step. It enables the detection of pathogens and other microorganisms contaminants without the need to culture microbial cells meaning that the sample (water, waste or food e.g. milk, wine, beer) may be analysed directly. This leads to a significant reduction of time required for analysis allowing monitoring of production processes and immediate reaction in case of contamination or any disruption occurs. Apart from the analysis of raw materials or products on different stages of manufacturing process, the flow cytometry seems to constitute an ideal tool for the assessment of microbial contamination on the surface of technological lines. In the present work samples comprising smears from 3 different surfaces of technological lines from fruit and vegetable processing company from Greater Poland were analysed directly with flow cytometer. The measured parameters were forward and side scatter of laser light signals allowing the estimation of microbial cell contents in each sample. Flow cytometric analysis of the surface of food industry production lines enable the preliminary evaluation of microbial contamination within few minutes from the moment of sample arrival without the need of sample pretreatment. The presented method of fl ow cytometric initial evaluation of microbial state of food industry technological lines demonstrated its potential for developing a robust, routine method for the rapid and labor-saving detection of microbial contamination in food industry.

On-line and bulk analysis of iron ore and bauxite

International Nuclear Information System (INIS)

Holmes, R.J.; Roczniok, A.F.

1983-01-01

A number of analysis techniques based on neutron and gamma radiation have been developed for the mining industry. Current projects include the measurement of annihilation radiation arising from pair production for the on-line determination of the iron content of iron ores, and the construction of a demonstration bauxite analyser based on fast-neutron activation analysis for the simultaneous determination of aluminium and silicon content

Manufacturing lines under surplus-based control : multiple products and bounded buffers

NARCIS (Netherlands)

Starkov, K.; Pogromskiy, A.Y.; Adan, I.J.B.F.

2015-01-01

Challenged by the scheduling complexity for production flow processes in industrial facilities, we study the performance of multi-product producing lines. We analyse the performance of multi-product lines that consist a number of machines and bounded buffers with preselected base stock levels. It is

Production of Multiple Growth Factors by a Newly Established Human Thyroid Carcinoma Cell Line

Science.gov (United States)

Yoshida, Yataro; Ohashi, Kensaku; Sano, Emiko; Kobayashi, Hisataka; Endo, Keigo; Naruto, Masanobu; Nakamura, Toru

1992-01-01

A multiple growth factor‐producing tumor cell line (NIM‐1) was newly established from a patient with thyroid cancer and remarkable neutrophilia. NIM‐1 cells also caused severe neutrophilia in nude mice bearing tumors. NIM‐1‐conditioned medium (NIM‐1CM) contained activities that supported not only granulocyte, macrophage and eosinophil colony formation of human bone marrow cells but also the growth of colony‐stimulating factor (CSF)‐dependent cell lines, NFS60‐KX and TF‐1. Northern blot hybridization analysis revealed the constitutive expression of granulocyte‐CSF (G‐CSF), granulocyte/macrophage‐CSF (GM‐CSF) and interleukin(IL)‐6 mRNAs in NIM‐1 cells. Enzyme‐linked immunosorbent assays (ELISA) using NIM‐1CM also confirmed the production of IL‐la and a small amount of IL‐1β besides G‐CSF, GM‐CSF and IL‐6 in NIM‐1 cells. In addition, unexpected production of IL‐11 in NIM‐1 cells was detected by northern blot hybridization analysis and by bioassay using an IL‐11‐dependent cell line. Therefore, NIM‐1 cell line is shown to produce multiple cytokines including potentially megakaryopoietic growth factors such as GM‐CSF, IL‐6 and IL‐11. PMID:1372885

Project development and commercialization of on-line analysis systems

International Nuclear Information System (INIS)

Watt, J.S.

1997-01-01

A project team first in the Australian Atomic Energy Commission (AAEC) and since 1982 in CSIRO has developed many on-line analysis systems for the mineral and energy industries. The development of these projects has followed a common pattern of laboratory R and D, field trials, commercialisation and technology transfer. This successful pattern is illustrated using examples of the development of systems for the on-line analysis of mineral slurries, for determination of the ash content of coal on conveyors, and for determination of the flow rates of oil, water and gas in pipelines. The first two systems are licensed to Australian companies, Amdel Ltd and Mineral Control Instrumentation Ltd. Both systems are used by industry worldwide, and are the market leaders for radioisotope gauges in their application field. The third system, the multiphase flow meter, was licensed in 1997 to Kvaerner FSSL Ltd of Aberdeen. This meter has even greater potential than the other two systems for economic benefit from its used and for numbers of installations. The on-line analysis systems have been developed to increase the productivity of the Australian mineral and energy industries, and to provide economic benefit to Australia. The economic benefit sought is predominantly improved process control based on use of the instrument, rather than from its sale. Sales of instruments are significant, however, with about A$80 million from the analysis systems and their derivatives since the 1970s. Some of the issues associated with the development of the on-line analysis system are outlined

On-line measurement and control in sustainable mineral processing and energy production

International Nuclear Information System (INIS)

Sowerby, B.D.

2002-01-01

Sustainable development can be defined as development that 'meets the needs of the present without compromising the ability of future generations to meet their own needs' (WCED, 1987). A sustainable minerals and energy industry will need to achieve a number of related objectives including greater energy efficiency, improved utilisation of ore deposits, improved utilisation of existing plant, improved product quality, reduction of waste material, reduction of pollution levels and improved safety margins. These objectives all relate in varying degrees to the triple bottom line of economic, social and environmental benefits. One critical component in achieving these objectives is to develop and apply improved control systems across the full range of industry applications from mining to processing and utilisation. However process control relies heavily on the availability of suitable on-line process instrumentation to provide the data and feedback necessary for its implementation. There is a lot of truth in the saying 'if you can't measure it you can't control it'. In the past measurement was achieved by manual sampling followed by sample preparation (such as drying, mixing, crushing and dividing) and off-line laboratory analysis. However this procedure is often subject to significant sampling errors and, most importantly, the measurements are too slow for control purposes. By contrast, on-line analysis can provide rapid and accurate measurement in real time thus opening up new possibilities for improved process control. As a result, there has been a rapid increase in the industrial application of on-line analysis instrumentation over the past few decades. The main purpose of this paper is to briefly review some past Australian developments of on-line analysis systems in the mineral and coal industries and to discuss present developments and future trends

Supporting Product Line Evolution with Framed Aspects

DEFF Research Database (Denmark)

Loughran, Neil; Rashid, Awais; Zhang, Weishan

2004-01-01

, but there will eventually come a time when a certain feature or scenario appears which could not have been foreseen in the early stages of development. We argue that frames and aspects when used in isolation cannot overcome these weaknesses effectively. However, they can be addressed by using the respective strengths......This paper discusses how evolution in software product lines can be supported using framed aspects: a combination of aspect-oriented programming and frame technology. Product line architectures and assets are subject to maintenance and evolution throughout their lifetime due to the emergence of new...... of both technologies in combination. The amalgamation of framing and aspect-oriented techniques can help in the integration of new features and thus reduce the risk of architectural erosion....

Classification and calculation of primary failure modes in bread production line

International Nuclear Information System (INIS)

Tsarouhas, Panagiotis H.

2009-01-01

In this study, we describe the classification methodology over a 2-year period of the primary failure modes in categories based on failure data of bread production line. We estimate the probabilities of these categories applying the chi-square goodness of fit test, and we calculate their joint probabilities of mass function at workstation and line level. Then, we present numerical examples in order to predict the causes and frequencies of breakdowns for workstations and for the entire bread production line that will occur in the future. The methodology is meant to guide bread and bakery product manufacturers, improving the operation of the production lines. It can also be a useful tool to maintenance engineers, who wish to analyze and improve the reliability and efficiency of the manufacturing systems

Modular production line optimization: The exPLORE architecture

Directory of Open Access Journals (Sweden)

Spinellis Diomidis D.

2000-01-01

Full Text Available The general design problem in serial production lines concerns the allocation of resources such as the number of servers, their service rates, and buffers given production-specific constraints, associated costs, and revenue projections. We describe the design of exPLOre: a modular, object-oriented, production line optimization software architecture. An abstract optimization module can be instantiated using a variety of stochastic optimization methods such as simulated annealing and genetic algorithms. Its search space is constrained by a constraint checker while its search direction is guided by a cost analyser which combines the output of a throughput evaluator with the business model. The throughput evaluator can be instantiated using Markovian, generalised queueing network methods, a decomposition, or an expansion method algorithm.

Bucket Brigades to Increase Productivity in a Luxury Assembly Line

OpenAIRE

Carlo, Filippo De; Borgia, Orlando; Tucci, Mario

2013-01-01

One of the most challenging issues in manual assembly lines is to achieve the best balance of workloads. There are many analytic approaches to solve this problem, but they are often neglected, since they are time-consuming and require high level engineering skills. Fashion bags packaging lines must comply with a number of different products with low production volumes, while the organization of the line is often under the mere responsibility of the foreman, who balances workloads in an empiri...

A Value-Based Business Approach to Product Line Software Engineering

Directory of Open Access Journals (Sweden)

Raman K. Agrawalla

2009-08-01

Full Text Available The present conceptual paper is an attempt to provide a Value-Based Business Approach (VBBA to product line software engineering. It argues that Product line software engineering should be seen as a system and considered as a means towards the end of appropriating more and more value for the business firm; contingent upon the fact that it provides value to customer and customer's customers operating its value creating system with agility, speed, economy and innovation; getting governed by the positive sum value creation outlook and guided by value- based management. With our value-based business triad, the product line engineering process can hope to achieve simultaneously value, variety and volume, product differentiation and cost leadership enabling the business firm to land on the virtuous value spiral.

Product-line extensions and pricing strategies of brand-name drugs facing patent expiration.

Science.gov (United States)

Hong, Song Hee; Shepherd, Marvin D; Scoones, David; Wan, Thomas T H

2005-01-01

This study proposed an alternative to brand loyalty as the explanation for the continued price rigidity of patent-expired brand-name prescription drugs despite the increase in market entry of generic drugs facilitated by the 1984 Drug Price Competition and Patent Term Restoration Act. Study hypotheses were to test (1) whether market entries of new-product extensions are associated with market success of original brand-name drugs before generic drug entry, and (2) whether original brand-name drugs exhibit price rigidity to generic entry only when they are extended. The design is a retrospective follow-up study for the prescription drug brands that lost their patents between 1987 and 1992. The drug brands were limited to nonantibiotic, orally administered drugs containing only 1 active pharmaceutical ingredient. Information on patent expiration, entry of a product extension, and market success were determined from the U.S. Food and Drug Administration.s Orange Book, First DataBank, and American Druggist, respectively. Market success was defined as whether an original drug brand was listed in the top 100 prescriptions most frequently dispensed before facing generic entry. Product-line extension was defined as the appearance of another product that a company introduces within the same market after its existing product. Drug prices were average wholesale prices from the Drug Topics Red Book. The relationship between product-line extension and market success was examined using a logistic regression analysis. The price rigidity to entry was tested using a panel regression analysis. A total of 27 drug brands lost their patents between 1987 and 1992. Drug brands that achieved market success were 16 times more likely to be extended than were those that did not (OR=16, 95% confidence interval, 2.12-120.65). The price rigidity to entry existed in drug brands with extensions (beta=2.65%, P new product-line extension introduced for an original brand helps the original price be

THE ANALYSIS OF CORRELATIONS BETWEEN THE MAIN TRAITS OF WOOL PRODUCTION ON PALAS SHEEP LINE FOR MEAT, MILK AND HIGH PROLIFICACY

Directory of Open Access Journals (Sweden)

ANA ENCIU

2008-10-01

Full Text Available The aim of this paper was to analyze the coefficient of phenotypic correlation and regression between main wool production traits for the sheep belonging to the Palas line specialized for meat, milk and with high prolificacy. The study was performed on a 10 years interval, the phenotypic correlation and the regression being determined for age groups and body weight classes for the following traits: raw wool production, the staple length, wool diameter and body weight at shearing. The obtained results are showing that for the specialized sheep lines the efficiency of wool production is also higher for the sheep with moderate body weights but for these sheep lines the selection for body weight will be done based on the morphoproductive parameters specific to the purpose of exploitation (milk production, meat production or high prolificacy.

Reliability Analysis of an Extended Shock Model and Its Optimization Application in a Production Line

Directory of Open Access Journals (Sweden)

Renbin Liu

2014-01-01

some important reliability indices are derived, such as availability, failure frequency, mean vacation period, mean renewal cycle, mean startup period, and replacement frequency. Finally, a production line controlled by two cold-standby computers is modeled to present numerical illustration and its optimal part-time job policy at a maximum profit.

Customized Pull Systems for Single-Product Flow Lines

NARCIS (Netherlands)

Gaury, E.G.A.; Kleijnen, J.P.C.; Pierreval, H.

1998-01-01

Traditionally pull production systems are managed through classic control systems such as Kanban, Conwip, or Base stock, but this paper proposes ‘customized’ pull control. Customization means that a given production line is managed through a pull control system that in principle connects each stage

Nuclear techniques for on-line analysis in the mineral and energy industries

International Nuclear Information System (INIS)

Sowerby, B.D.; Watt, J.S.

1994-01-01

Nuclear techniques are the basis of many on-line analysis systems which are now widely used in the mineral and energy industries. Some of the systems developed by the CSIRO depend entirely on nuclear techniques; others use a combination of nuclear techniques and microwave, capacitance, or ultrasonic techniques. The continuous analysis and rapid response of these CSIRO systems has led to improved control of mining, processing and blending operations, with increased productivity valued at A$50 million per year to Australia, and $90 million per year world wide. This paper reviews developments in nuclear on-line analysis systems by the On-Line Analysis Group in CSIRO at Lucas Heights. Commercialised systems based on this work analyse mineral and coal slurries and determine the ash and moisture contents of coal and coke on conveyors. This paper also reviews two on-line nuclear analysis systems recently developed and licensed to industry, firstly for the determination of the mass flow rates of oil/water/gas mixtures in pipelines, and secondly for determination of the moisture, specific energy, ash and fouling index in low rank coals. 8 refs., 3 tabs., 4 figs

Managing the Evolution of an Enterprise Architecture using a MAS-Product-Line Approach

Science.gov (United States)

Pena, Joaquin; Hinchey, Michael G.; Resinas, manuel; Sterritt, Roy; Rash, James L.

2006-01-01

We view an evolutionary system ns being n software product line. The core architecture is the unchanging part of the system, and each version of the system may be viewed as a product from the product line. Each "product" may be described as the core architecture with sonre agent-based additions. The result is a multiagent system software product line. We describe an approach to such n Software Product Line-based approach using the MaCMAS Agent-Oriented nzethoclology. The approach scales to enterprise nrchitectures as a multiagent system is an approprinre means of representing a changing enterprise nrchitectclre nnd the inferaction between components in it.

Development of at-line assay to monitor charge variants of MAbs during production.

Science.gov (United States)

St Amand, M M; Ogunnaike, B A; Robinson, A S

2014-01-01

One major challenge currently facing the biopharmaceutical industry is to understand how MAb microheterogeneity affects therapeutic efficacy, potency, immunogenicity, and clearance. MAb micro-heterogeneity can result from post-translational modifications such as sialylation, galactosylation, C-terminal lysine cleavage, glycine amidation, and tryptophan oxidation, each of which can generate MAb charge variants; such heterogeneity can affect pharmacokinetics (PK) considerably. Implementation of appropriate on-line quality control strategies may help to regulate bioprocesses, thus enabling more homogenous material with desired post-translational modifications and PK behavior. However, one major restriction to implementation of quality control strategies is the availability of techniques for obtaining on-line or at-line measurements of these attributes. In this work, we describe the development of an at-line assay to separate MAb charge variants in near real-time, which could ultimately be used to implement on-line quality control strategies for MAb production. The assay consists of a 2D-HPLC method with sequential in-line Protein A and WCX-10 HPLC column steps. To perform the 2D-HPLC assay at-line, the two columns steps were integrated into a single method using a novel system configuration that allowed parallel flow over column 1 or column 2 or sequential flow from column 1 to column 2. A bioreactor system was also developed such that media samples could be removed automatically from bioreactor vessels during production and delivered to the 2D-HPLC for analysis. With this at-line HPLC assay, we have demonstrated that MAb microheterogeneity occurs throughout the cell cycle whether the host cell line is grown under different or the same nominal culture conditions. © 2013 American Institute of Chemical Engineers.

Product-line administration: a framework for redefining medical record department services.

Science.gov (United States)

Postal, S N

1990-06-01

Product-line administration is a viable approach for managing medical records services in an environment that demands high quantity and quality service levels. Product-line administration directs medical record department team members to look outside of the department and seek input from the customers it is intended to serve. The feedback received may be alarming at first, as the current state of products usually reveals a true lack of customer input. As the planning, defining, managing, and marketing phases are implemented, the road will not be easy and rewards will be slow to come. Product-line administration does not provide quick fixes, but it does provide long-term problem resolution as products are refined and new products developed to meet customer needs and expectations. In addition to better meeting the needs of the department's external customers, the department's internal customers' needs and expectations will be addressed. The participative management approach will help nurture each team member's creativity. The team members will have the opportunity to reach their full potential while reaping the rewards and benefits of providing products and services that meet the needs and expectations of all department customers. The future of the health care industry promises more changes as the country moves toward some form of prospective payment in the ambulatory setting. Reactive management and the constant struggle to catch up can no longer be accepted as a management approach. It is imperative that the medical record department be viewed as a business with product lines composed of quality products. The planning, defining, managing, and marketing components of product-line administration afford responsiveness to the current situation and the development of quality products that will ensure that medical record departments are prepared for the future.

Production and efficiency of large wildland fire suppression effort: A stochastic frontier analysis.

Science.gov (United States)

Katuwal, Hari; Calkin, David E; Hand, Michael S

2016-01-15

This study examines the production and efficiency of wildland fire suppression effort. We estimate the effectiveness of suppression resource inputs to produce controlled fire lines that contain large wildland fires using stochastic frontier analysis. Determinants of inefficiency are identified and the effects of these determinants on the daily production of controlled fire line are examined. Results indicate that the use of bulldozers and fire engines increase the production of controlled fire line, while firefighter crews do not tend to contribute to controlled fire line production. Production of controlled fire line is more efficient if it occurs along natural or built breaks, such as rivers and roads, and within areas previously burned by wildfires. However, results also indicate that productivity and efficiency of the controlled fire line are sensitive to weather, landscape and fire characteristics. Copyright © 2015 Elsevier Ltd. All rights reserved.

Product Lines for Service Oriented Applications - PL for SOA

Directory of Open Access Journals (Sweden)

Maurice H. ter Beek

2011-08-01

Full Text Available PL for SOA proposes, formally, a software engineering methodology, development techniques and support tools for the provision of service product lines. We propose rigorous modeling techniques for the specification and verification of formal notations and languages for service computing with inclinations of variability. Through these cutting-edge technologies, increased levels of flexibility and adaptivity can be achieved. This will involve developing semantics of variability over behavioural models of services. Such tools will assist organizations to plan, optimize and control the quality of software service provision, both at design and at run time by making it possible to develop flexible and cost-effective software systems that support high levels of reuse. We tackle this challenge from two levels. We use feature modeling from product line engineering and, from a services point of view, the orchestration language Orc. We introduce the Smart Grid as the service product line to apply the techniques to.

Product-line selection and pricing with remanufacturing under availability constraints

Science.gov (United States)

Aras, Necati; Esenduran, G.÷k.‡e.; Altinel, I. Kuban

2004-12-01

Product line selection and pricing are two crucial decisions for the profitability of a manufacturing firm. Remanufacturing, on the other hand, may be a profitable strategy that captures the remaining value in used products. In this paper we develop a mixed-integer nonlinear programming model form the perspective of an original equipment manufacturer (OEM). The objective of the OEM is to select products to manufacture and remanufacture among a set of given alternatives and simultaneously determine their prices so as to maximize its profit. It is assumed that the probability a customer selects a product is proportional to its utility and inversely proportional to its price. The utility of a product is an increasing function of its perceived quality. In our base model, products are discriminated by their unit production costs and utilities. We also analyze a case where remanufacturing is limited by the available quantity of collected remanufacturable products. We show that the resulting problem is decomposed into the pricing and product line selection subproblems. Pricing problem is solved by a variant of the simplex search procedure which can also handle constraints, while complete enumeration and a genetic algorithm are used for the solution of the product line selection problem. A number of experiments are carried out to identify conditions under which it is economically viable for the firm to sell remanufactured products. We also determine the optimal utility and unit production cost values of a remanufactured product, which maximizes the total profit of the OEM.

Advances in Mammalian Cell Line Development Technologies for Recombinant Protein Production

Directory of Open Access Journals (Sweden)

Say Kong Ng

2013-04-01

Full Text Available From 2006 to 2011, an average of 15 novel recombinant protein therapeutics have been approved by US Food and Drug Administration (FDA annually. In addition, the expiration of blockbuster biologics has also spurred the emergence of biosimilars. The increasing numbers of innovator biologic products and biosimilars have thus fuelled the demand of production cell lines with high productivity. Currently, mammalian cell line development technologies used by most biopharmaceutical companies are based on either the methotrexate (MTX amplification technology or the glutamine synthetase (GS system. With both systems, the cell clones obtained are highly heterogeneous, as a result of random genome integration by the gene of interest and the gene amplification process. Consequently, large numbers of cell clones have to be screened to identify rare stable high producer cell clones. As such, the cell line development process typically requires 6 to 12 months and is a time, capital and labour intensive process. This article reviews established advances in protein expression and clone screening which are the core technologies in mammalian cell line development. Advancements in these component technologies are vital to improve the speed and efficiency of generating robust and highly productive cell line for large scale production of protein therapeutics.

Production yield analysis in the poultry processing industry

NARCIS (Netherlands)

Somsen, D.J.; Capelle, A.; Tramper, J.

2004-01-01

The paper outlines a case study where the PYA-method (production yield analysis) was implemented at a poultry-slaughtering line, processing 9000 broiler chicks per hour. It was shown that the average live weight of a flock of broilers could be used to predict the maximum production yield of the

Introducing Product Lines through Open Source Tools

OpenAIRE

Haugen, Øystein

2008-01-01

We present an approach to introducing product lines to companies that lower their initial risk by applying open source tools and a smooth learning curve into the use and creation of domain specific modeling combined with standardized variability modeling.

Grain product of 34 soya mutant lines

International Nuclear Information System (INIS)

Salmeron E, J.; Mastache L, A. A.; Valencia E, F.; Diaz V, G. E.; Cervantes S, T.; De la Cruz T, E.; Garcia A, J. M.; Falcon B, T.; Gatica T, M. A.

2009-01-01

This work was development with the objective of obtaining information of the agronomic behavior of 34 soya mutant lines (R 4 M 18 ) for human consumption and this way to select the 2 better lines. The genetic materials were obtained starting from the variety ISAAEG-B M2 by means of the application of recurrent radiation with Co 60 gammas, to a dose of 350 Gray for the first two generations and both later to 200 Gray and selection during 17 cycles, being obtained the 34 better lines mutants with agronomic characteristic wanted and good flavor. The obtained results were that the mutant lines L 25 and L 32 produced the major quantity in branches/plant number with 7.5 and 7.25, pods/plant number with 171.25 and 167, grains/plant number with 350.89 and 333.07 and grain product (ton/ha) to 15% of humidity 5.15 and 4.68 ton/ha, respectively. (Author)

SPL^LIFT: Statically Analyzing Software Product Lines in Minutes instead of Years

DEFF Research Database (Denmark)

Bodden, Eric; Tolêdo, Társis; Ribeiro, Márcio

2013-01-01

IFDS framework for inter-procedural, finite, distributive, subset problems to an SPL-aware analysis formulated in the IDE framework, a well-known extension to IFDS. Using a full implementation based on Heros, Soot, CIDE and JavaBDD, we show that with SPLLIFT one can reuse IFDS-based analyses without...... changing a single line of code. Through experiments using three static analyses applied to four Java-based product lines, we were able to show that our approach produces correct results and outperforms the traditional approach by several orders of magnitude....

40 CFR 1045.305 - How must I prepare and test my production-line engines?

Science.gov (United States)

2010-07-01

... production-line engines? 1045.305 Section 1045.305 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM SPARK-IGNITION PROPULSION MARINE ENGINES AND VESSELS Testing Production-line Engines § 1045.305 How must I prepare and test my production-line engines...

40 CFR 1048.305 - How must I prepare and test my production-line engines?

Science.gov (United States)

2010-07-01

... production-line engines? 1048.305 Section 1048.305 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM NEW, LARGE NONROAD SPARK-IGNITION ENGINES Testing Production-line Engines § 1048.305 How must I prepare and test my production-line engines? This...

The recommendation of line-balancing improvement on MCM product line 1 using genetics algorithm and moodie young at XYZ Company, Co.

Science.gov (United States)

Sriwana, I. K.; Marie, I. A.; Mangala, D.

2017-12-01

Kencana Gemilang, Co. is one electronics industry engaging in the manufacture sector. This company manufactures and assembles household electronic products, such as rice cooker, fan, iron, blender, etc. The company deals with an issue of underachievement of an established production target on MCM products line 1. This study aimed to calculate line efficiencies, delay times, and initial line smoothness indexes. The research was carried out by means of depicting a precedence diagram and gathering time data of each work element followed by examination and calculation of standard time as well as line balancing using methods of Moodie Young and Generics Algorithm. Based on results of calculation, better line balancing than the existing initial conditions, i.e. improvement in the line efficiency by 18.39%, deterioration in balanced delay by 28.39%, and deterioration of a smoothness index by 23.85% was obtained.

77 FR 61742 - Certain Lined Paper Products From India: Preliminary Results of Countervailing Duty...

Science.gov (United States)

2012-10-11

... DEPARTMENT OF COMMERCE International Trade Administration [C-533-844] Certain Lined Paper Products... order on certain lined paper products from India. The period of review (POR) is January 1, 2010, through... (202) 482-1009. Scope of the Order The merchandise subject to the order is certain lined paper products...

Recombinant protein production from stable mammalian cell lines and pools.

Science.gov (United States)

Hacker, David L; Balasubramanian, Sowmya

2016-06-01

We highlight recent developments for the production of recombinant proteins from suspension-adapted mammalian cell lines. We discuss the generation of stable cell lines using transposons and lentivirus vectors (non-targeted transgene integration) and site-specific recombinases (targeted transgene integration). Each of these methods results in the generation of cell lines with protein yields that are generally superior to those achievable through classical plasmid transfection that depends on the integration of the transfected DNA by non-homologous DNA end-joining. This is the main reason why these techniques can also be used for the generation of stable cell pools, heterogenous populations of recombinant cells generated by gene delivery and genetic selection without resorting to single cell cloning. This allows the time line from gene transfer to protein production to be reduced. Copyright © 2016 Elsevier Ltd. All rights reserved.

Systems, methods and apparatus for developing and maintaining evolving systems with software product lines

Science.gov (United States)

Hinchey, Michael G. (Inventor); Rash, James L. (Inventor); Pena, Joaquin (Inventor)

2011-01-01

Systems, methods and apparatus are provided through which an evolutionary system is managed and viewed as a software product line. In some embodiments, the core architecture is a relatively unchanging part of the system, and each version of the system is viewed as a product from the product line. Each software product is generated from the core architecture with some agent-based additions. The result may be a multi-agent system software product line.

Production of high-amylose maize lines using RNA interference in ...

African Journals Online (AJOL)

amylose maize lines with a low T-DNA copy number, demonstrating that RNAi is an efficient method for the production of high-amylose maize lines. Key words: Maize, high-amylose, RNA interference, starch branching enzyme gene sbe2a.

78 FR 62584 - Certain Lined Paper Products From India: Preliminary Results of Countervailing Duty...

Science.gov (United States)

2013-10-22

... DEPARTMENT OF COMMERCE International Trade Administration [C-533-844] Certain Lined Paper Products... (CVD) order on certain lined paper products from India. The period of review (POR) is January 1, 2011...-1503. Scope of the Order The merchandise subject to the Lined Paper Order \\1\\ is certain lined paper...

Quantitative analysis of investment allocation over various resources of health care systems by using views of product lines

Science.gov (United States)

Tai, Guangfu; Williams, Peter

2013-11-01

Hospitals can be viewed as service enterprises, of which the primary function is to provide specific sets of diagnostic and therapeutic medical services to individual patients. Each patient has certain diagnosis and therapeutic attributes in common with some other patients. Thus, patients with similar medical attributes could be 'processed' in one 'product line' of medical services, and individual treatments for patients within one 'product line' can be regarded as incurring identical consumption of health care resources. This article presents a theoretical framing for resource planning and investment allocation of various resources from a macro perspective of costs that demonstrates the need to plan capacity at the disaggregated resource level. The result of a balanced line ('optimal') is compared with an alternative scheme of 'the same ratio composing of resources' under the same monetary constraints. Thus, it is demonstrated that planning at the disaggregated level affords much better use of resources than achieved in common practice of budget control by simple percentage increase/decrease in distributing a financial vote.

The relationship of metabolic burden to productivity levels in CHO cell lines.

Science.gov (United States)

Zou, Wu; Edros, Raihana; Al-Rubeai, Mohamed

2018-03-01

The growing demand for recombinant therapeutics has driven biotechnologists to develop new production strategies. One such strategy for increasing the expression of heterologous proteins has focused on enhancing cell-specific productivity through environmental perturbations. In this work, the effects of hypothermia, hyperosmolarity, high shear stress, and sodium butyrate treatment on growth and productivity were studied using three (low, medium, and high producing) CHO cell lines that differed in their specific productivities of monoclonal antibody. In all three cell lines, the inhibitory effect of these parameters on proliferation was demonstrated. Additionally, compared to the control, specific productivity was enhanced under all conditions and exhibited a consistent cell line specific pattern, with maximum increases (50-290%) in the low producer, and minimum increases (7-20%) in the high producer. Thus, the high-producing cell line was less responsive to environmental perturbations than the low-producing cell line. We hypothesize that this difference is most likely due to the bottleneck associated with a higher metabolic burden caused by higher antibody expression. Increased recombinant mRNA levels and pyruvate carboxylase activities due to low temperature and hyperosmotic stress were found to be positively associated with the metabolic burden. © 2017 International Union of Biochemistry and Molecular Biology, Inc.

Induction heating in in-line strip production process

International Nuclear Information System (INIS)

Costa, P.; Santinelli, M.

1995-05-01

ISP (In-line Strip Production), a continuous process for steel strip production, has recently been set in an italian innovative plant, where ecological impact and power requirements are lighter than usual. This report describes the studies performed by ENEA (Italian Agency for New Technologies, Energy and the Environment), while a prototype reheating facility was arranged by Acciaieria ISP in Cremona (Italy). The authors, after a study of the prototype electromagnetic field, calculate the heating rate, with the thermal network method. Then they detect, with a 1-D-FEM, the heat diffusion through the strip cross section. Afterward, since the heat distribution depends on the eddy current density one, which is given by the magnetic field distribution, the authors, with a 3-D-FEM, carry out a coupled, electromagnetic and thermal, analysis in time domain. The strip temperature map is established by the balance between skin depth heating and surface cooling: a thermal analysis, performed with a moving 2-D-FEM, take into account the effects of the different heating and cooling situations, originated by the strip moving at a speed of 6m/min through four consecutive reheating facilities. The temperatures of a strip sample heated by the prototype have been monitored, acquired by a computer and related with the simulation results. The little difference between experiment and simulation assessed the qualitative and quantitative validity of this analysis, that has come out to be a tool, useful to evaluate the effects of possible improvements to the ISP process

Productivity improvement in the production line with lean manufacturing approach: case study PT. XYZ

Directory of Open Access Journals (Sweden)

diah Halimatussa’

2018-01-01

Full Text Available The increaseing productivity is one of the competitive strategies that can be applied in a company in order to survive in an intense competitive presure. PT. XYZ is a textile industry manufacturing golf gloves and caddy bag. Every day, the company has a production target of 600 pieces per line. However, the desired target is not achieved that it will affect the delay in delivery of products to customers. In this research, a case study on implementing value stream mapping and Kaizen as the lean manufacturing concept is reported. The purpose of this study is to map the current production line, analyse and design the future value stream mapping by eliminating waste occured. It is obtained a lead time reduction as much as 440.4 seconds through eliminating 17 non-value added activities. Then, the output can be increased up to 21% which is equal to 502 pieces.

40 CFR 1048.301 - When must I test my production-line engines?

Science.gov (United States)

2010-07-01

... engines? 1048.301 Section 1048.301 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM NEW, LARGE NONROAD SPARK-IGNITION ENGINES Testing Production-line Engines § 1048.301 When must I test my production-line engines? (a) If you produce engines...

40 CFR 1045.301 - When must I test my production-line engines?

Science.gov (United States)

2010-07-01

... engines? 1045.301 Section 1045.301 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM SPARK-IGNITION PROPULSION MARINE ENGINES AND VESSELS Testing Production-line Engines § 1045.301 When must I test my production-line engines? (a) If you produce...

High performance liquid chromatographic analysis of insulin degradation products from a cultured kidney cell line

International Nuclear Information System (INIS)

Duckworth, W.C.; Hamel, F.G.; Liepnieks, J.; Frank, B.H.; Yagil, C.; Rabkin, R.

1988-01-01

The kidney is a major site for insulin removal and degradation, but the subcellular processes and enzymes involved have not been established. We have examined this process by analyzing insulin degradation products by HPLC. Monoiodoinsulin specifically labeled on either the A14 or B26 tyrosine residue was incubated with a cultured kidney epithelial cell line, and both intracellular and extracellular products were examined on HPLC. The products were then compared with products of known structure generated by hepatocytes and the enzyme insulin protease. Intracellular and extracellular products were different, suggesting two different degradative pathways, as previously shown in liver. The extracellular degradation products eluted from HPLC both before and after sulfitolysis similarly with hepatocyte products and products generated by insulin protease. The intracellular products also eluted identically with hepatocyte products. Based on comparisons with identified products, the kidney cell generates two fragments from the A chain of intact insulin, one with a cleavage at A13-A14 and the other at A14-A15. The B chain of intact insulin is cleaved in a number of different sites, resulting in peptides that elute identically with B chain peptides cleaved at B9-B10, B13-B14, B16-B17, B24-B25, and B25-B26. These similarities with hepatocytes and insulin protease suggest that liver and kidney have similar mechanisms for insulin degradation and that insulin protease or a very similar enzyme is involved in both tissues

Managing the risks of the backfill production line from material acquisition to installation

International Nuclear Information System (INIS)

Kiviranta, Leena; Kumpulainen, Sirpa; Keto, Paula; Autio, Jorma; Siivonen, Markku; Koho, Petri

2012-01-01

Document available in extended abstract form only. The tunnel backfill of Finnish KBS-3V type repository for spent nuclear fuel consists of foundation layer that is installed at site, pre-compacted backfill blocks that fill most of the tunnel and bentonite pellets to fill the gap between blocks and tunnel wall. In order to ensure the quality, availability, and timely delivery of backfill materials and components, and further to ensure the fulfillment of the requirements and specifications set for backfilling of deposition tunnels, the backfill production line was explored step-by-step, and risks related were defined and analyzed. The work described in this paper was initiated by Posiva Oy and is reported in Keto et al. (2012). The first part of the backfill production line is described in Figure 1 for Friedland clay that is designed to be used for the backfill blocks. It consists of excavation, processing and delivery of materials to backfill production facility. Second part of the production line consists of manufacturing of the backfill components, and the third part is the installation. A preliminary risk assessment was done in 2011 for the acquisition of Friedland clay and manufacturing and installation of foundation layer, blocks and pellets. The critical points of the production line were determined using a material flow description where risk is defined as a probability of something unwanted to happen times the severity of the consequences. Risk analysis was performed by going through the whole backfill production line step by step and analyzing all the incidents, which have occurred (or might occur) during the backfilling operations. A risk number from 1 to 25 was given to each step of the chain depending on how long delay the problem causes and how often it occurs. Low risk was the target for each step of the chain, medium risk was considered tolerable, for high risks management actions to decrease the risk number were considered and extremely high risks

COMPARISON OF PRODUCTION PARAMETERS BETWEEN THE FIRST GENERATION OF A-LINE IMPORTED AND BRED GILTS ON THE NUCLEUS FARM VELIKA BRANJEVINA

Directory of Open Access Journals (Sweden)

Dragica Dubravac

2013-06-01

Full Text Available Comparison of productive parameters of two analyzed groups (the first generation of imported gilts and the gilts born on the domestic farm was conducted on a nucleus farm that imported the gilt lines from the TOPIGS breeding program. For the purposes of the nucleus pig farm, TOPIGS gilts were imported from Netherlands. The nucleus farm where the analysis of the two groups’ productive parameters was conducted imported the ancestral and grandfather lines to produce the parenting generation TOPIGS 40 sows which are bred with a Pietrain line of boars. The TOPIGS 40 sow is an animal based on A-line and B-line characterized by high fertility rate, excellent maternal characteristics, good capacity for growth, and quality meaty body. The analysis of productive parameters of the two observed groups of gilts (the first generation of 105 imported gilts and 88 gilts born on the domestic farm resulted in significantly higher number of total born, born alive and weaned piglets after the first farrowing (P<0.001 as well as significantly higher number of total born and born alive piglets at third farrowing (P<0.05. The results of the observed qualities confirm the fact that, apart from the unquestionable genetic potential, other factors such as adaptation, accommodation conditions, microclimate, nutrition, and management have a significant effect on the increase of production results.

Off-Line Testing of Tribo-Systems for Sheet Metal Forming Production

DEFF Research Database (Denmark)

Bay, Niels; Ceron, Ermanno

2014-01-01

Off-line testing of new tribo-systems for sheet metal forming production is an important issue, when new, environmentally benign lubricants are to be introduced. To obtain useful results it is, however, vital to ensure similar conditions as in the production process regarding the main tribo...... leading to very high tool/workpiece interface pressure and temperature in the second re-draw. Under such conditions only the best lubricant systems work satisfactory, and the paper shows how the performance of different tribo-systems in production may be predicted by off-line testing combined...

THE LINE FOR PRODUCTION OF DRIED APPLES, PEARS, CARROTS, PUMPKIN AND CHIPS

Directory of Open Access Journals (Sweden)

G. V. Kalashnikov

2015-01-01

Full Text Available The line is intended for processing of fruit and vegetable raw materials and receiving dried apples, pears, carrots, pumpkins and the fruit-and-vegetable of chips. The line solves problems of improvement of quality of a ready-made product and thermal production efficiency due to more rational alternation of the technological modes of a moisture increment and dehumidification with high extent of use of an energy potential of the heat carrier, use of the inert heat carrier (steam identical by the form for technological thermal processes, decrease in specific energy consumption and metal consumption, and also an intensification of moisture evaporation and creation of the compact multipurpose technological line for production of fruit and vegetable products with the expanded range. The technological production line of dried apples, pears, carrots, pumpkin and fruit and vegetable chips contains the jet washer, the inspection conveyor, the size grader, the car for removal of a seed nest and the device are sharp fruits and vegetables on plates, the sulfiter, the dryer and the packing automatic packing machine. Thus the line contains the combined toroidal device for heatmoisture of handling continuous action divided into sections: section of heating of raw materials, section of convective drying, section of preliminary hydration, which is located between microwave drying sections, and the section of cooling of the dried-up product intended for bringing a product to final readiness. The equipment complex from the drum car with the washing block and multipurpose installation with crushing of raw materials and office of sunflower seeds taking into account raw materials type is provided in lines. Are used recirculation a contour, the heating of the initial raw material fulfilled after drying of pairs and a condensate in the closed contour for creation energy-saving of the "know-how" of a ready product. The line represents modular blocks and is recustomized

JSI-124 inhibits IgE production in an IgE B cell line

International Nuclear Information System (INIS)

Cui, Lulu; Bi, Jiacheng; Yan, Dehong; Ye, Xiufeng; Zheng, Mingxing; Yu, Guang; Wan, Xiaochun

2017-01-01

IgE is a key effector molecule in atopic diseases; however, the regulation mechanisms of IgE production in IgE B cells remain poorly understood. In the present study, we demonstrate that JSI-124 (cucurbitacin I), a selective STAT3 inhibitor, selectively inhibits production of IgE by a human IgE B cell line, CRL-8033 cells, while does not affect the IgG production by IgG B cell lines. In the aspect of molecular mechanism, we found that Igλ, but not Ighe, gene expression was suppressed by JSI-124. The above effects of JSI-124 were not mediated by affecting cellular proliferation or apoptosis. Furthermore, multiple B cell differentiation-related genes expression was not significantly affected by JSI-124. Taken together, we demonstrate a potential strategy of therapeutically suppressing IgE production without affecting IgG production in atopic patients. - Highlights: • JSI-124 inhibits IgE production in an IgE B cell line, CRL-8033 cells. • JSI-124 does not affect IgG production by IgG B cell lines. • JSI-124 inhibits IgE production mainly by suppressing transcription of Igλ.

Simulation and Flexibility Analysis of Milk Production Process

DEFF Research Database (Denmark)

Cheng, Hongyuan; Friis, Alan

. Such flexible dairy production line can adjust its production pace in manufacturing different products without replacing existing equipment in the production line. In this work, the dairy process simulator is applied to study the flexibility of milk production line. In the same production line, various......In this work, process simulation method is used to simulate pasteurised market milk production line. A commercial process simulation tool - Pro/II from Simulation Science Inc. is used in the simulation work. In the simulation, a new model is used to calculate the thermal property of milk....... In this work, a simulator is obtained for the milk production line. Using the simulator, different milk processing situation can be quantitatively simulated investigated, such as different products production, capacity changes, fat content changes in raw milk, energy cost at different operation conditions etc...

The use of statistical procedures for comparison of the production of eggs considering different treatments and lines of quails

Directory of Open Access Journals (Sweden)

Robson Marcelo Rossi

2012-04-01

Full Text Available To make inferences concerning a population, parametric methods are traditionally used for sample data analysis assuming that these come from ordinary populations, which not always happens. Most of the times such assumption leads to inadequate conclusions and decisions, especially when the data are distributed asymmetrically. It was aimed on this work to adjust some plausible models for this type of data, aiming to compare eggs productions in quails of different lines through frequentist and Bayesian methods. In the analyzed data it could be verified that the parametric and non-parametric frequentist procedures were, in general, equally conclusive. The Bayesian procedure was the only one which detected difference between the yellow and red lines, regarding the preconized energy diet, and between the blue and yellow for the second eclosion group. By the frequentist methods differences between the blue and red lines were not found; however, given a Poisson distribution for the eggs production, through multiple comparisons between the posterior mean under the Bayesian focus, differences were found between all lines. For being more sensitive, besides flexible, such procedure detected differences not observed by the traditional methods between the yellow and red lines, in the higher energy diet; between the blue and the red one in the second eclosion group and in general. It was concluded that quails of the yellow line showed bigger eggs production, regardless of the eclosion group and diet. Such results raise the discussion on the appropriate use of methods and procedures for statistical data analysis.

CONSTRAINING JET PRODUCTION SCENARIOS BY STUDIES OF NARROW-LINE RADIO GALAXIES

Energy Technology Data Exchange (ETDEWEB)

Sikora, Marek [Nicolaus Copernicus Astronomical Center, Bartycka 18, 00-716 Warsaw (Poland); Stasinska, Grazyna [LUTH, Observatoire de Paris, CNRS, Universite Paris Diderot, Place Jules Janssen, F-92190 Meudon (France); Koziel-Wierzbowska, Dorota [Astronomical Observatory, Jagiellonian University, ul. Orla 171, 30-244 Krakow (Poland); Madejski, Greg M. [Kavli Institute for Particle Astrophysics and Cosmology, Stanford University, Stanford, CA 94305 (United States); Asari, Natalia V., E-mail: sikora@camk.edu.pl [Institute of Astronomy, University of Cambridge, Madingley Road, Cambridge CB3 0HA (United Kingdom)

2013-03-01

We study a large sample of narrow-line radio galaxies (NLRGs) with extended radio structures. Using 1.4 GHz radio luminosities L {sub 1.4}, narrow optical emission line luminosities L {sub [OIII]} and L{sub H{sub {alpha}}}, as well as black hole masses M {sub BH} derived from stellar velocity dispersions measured from the optical spectra obtained with the Sloan Digital Sky Survey, we find that (1) NLRGs cover about four decades of the Eddington ratio, {lambda} {identical_to} L {sub bol}/L {sub Edd}{proportional_to}L {sub line}/M {sub BH}; (2) L {sub 1.4}/M {sub BH} strongly correlates with {lambda}; and (3) radio loudness, R{identical_to}L{sub 1.4}/L{sub line}, strongly anti-correlates with {lambda}. A very broad range of the Eddington ratio indicates that the parent population of NLRGs includes both radio-loud quasars (RLQs) and broad-line radio galaxies (BLRGs). The correlations they obey and their high jet production efficiencies favor a jet production model which involves the so-called magnetically choked accretion scenario. In this model, production of the jet is dominated by the Blandford-Znajek mechanism, and the magnetic fields in the vicinity of the central black hole are confined by the ram pressure of the accretion flow. Since large net magnetic flux accumulated in central regions of the accretion flow required by the model can take place only via geometrically thick accretion, we speculate that the massive, 'cold' accretion events associated with luminous emission-line active galactic nucleus can be accompanied by an efficient jet production only if preceded by a hot, very sub-Eddington accretion phase.

Discussion after implementation of possible ergonomics contributions in production lines automation project

OpenAIRE

José Adriano Canton; Andrea Regina Martins Fontes; Isaías Torres

2016-01-01

This paper addresses the issue of work spaces designed based on Activity-Centered Ergonomics. The aim was to reflect on the role of Ergonomics in the design of productive situations in order to anticipate and mitigate the emergence of new constraints. This study was developed using a case study from the packaging industry, where an automated line was implemented to mitigate the injuries suffered as result of the manual system. This article was based on the results of an Ergonomic Work Analysi...

On-line analysis of water contamination by organic compounds; On-line-Analytik der Wasserverschmutzung durch organische Substanzen

Energy Technology Data Exchange (ETDEWEB)

Wagt, R. van der; Vos, F. de [Skalar Analytical (Netherlands); Babichenko, S.; Poryvkina, L. [Institute of Ecology, Tallinn (Estonia)

1999-08-01

In many environmental applications decomposing the mixture of substances in the water into its various chemical ingredients, for subsequent analysis, is a very complicated task. The most productive approach to on-line diagnosis is to treat the object as an integral spectroscopic sample, characterized by certain specific Spectral Fluorescent Signatures (SFS). The SFS are recorded as a matrix of fluorescent intensity of organic compounds in water, in co-ordinates of excitation and emission spectra, providing a three-dimensional spectrum. Spectral windows of SFS are defined by fluorescent characteristics of basic groups of organic substances in the water sample. The novel Skalar Fluo Imager, based on this principle, is intended for the analysis of organic compounds in natural, domestic, and technological waters in an on-line mode. (orig.) [German] In vielen Umweltschutzanwendungen stellt die Auftrennung eines Substanzgemisches zum Zweck der Analyse eine sehr komplizierte Aufgabe dar. Ein erfolgversprechender Ansatz fuer eine on-line-Diagnostik besteht darin, das Objekt als integrale Spektroskopieprobe zu betrachten, die durch bestimmte spezifische Spektral-Fluoreszenz-Signaturen (SFS) charakterisiert wird. Diese werden als Fluoreszenz-Intensitaets-Matrix organischer Verbindungen in Wasser dargestellt, mit Anregungs- und Emissionsspektren als weiteren Koordinaten, wodurch ein dreidimensionales Spektrum entsteht. Spektrale Fenster der SFS sind definiert als Fluoreszenzcharakteristika von Funktionsgruppen organischer Substanzen in der Wasserprobe. Der auf diesem Prinzip basierende Skalar Fluo Imager ist fuer die on-line-Analyse organischer Bestandteile in natuerlichen, Haus- und technischen Waessern gedacht. (orig.)

Open Wilson lines and generalized star product in noncommutative scalar field theories

International Nuclear Information System (INIS)

Kiem, Youngjai; Sato, Haru-Tada; Rey, Soo-Jong; Yee, Jung-Tay

2002-01-01

Open Wilson line operators and a generalized star product have been studied extensively in noncommutative gauge theories. We show that they also show up in noncommutative scalar field theories as universal structures. We first point out that the dipole picture of noncommutative geometry provides an intuitive argument for the robustness of the open Wilson lines and generalized star products therein. We calculate the one-loop effective action of noncommutative scalar field theory with a cubic self-interaction and show explicitly that the generalized star products arise in the nonplanar part. It is shown that, at the low-energy, large noncommutativity limit, the nonplanar part is expressible solely in terms of the scalar open Wilson line operator and descendants

Design of Control System for Flexible Packaging Bags Palletizing Production Line Based on PLC

Science.gov (United States)

Zheng, Huiping; Chen, Lin; Zhao, Xiaoming; Liu, Zhanyang

Flexible packaging bags palletizing production line is to put the bags in the required area according to particular order and size, in order to finish handling, storage, loading and unloading, transportation and other logistics work of goods. Flexible packaging bags palletizing line is composed of turning bags mechanism, shaping mechanism, indexing mechanism, marshalling mechanism, pushing bags mechanism, pressing bags mechanism, laminating mechanism, elevator, tray warehouse, tray conveyor and loaded tray conveyor. Whether the whole production line can smoothly run depends on each of the above equipment and precision control among them. In this paper the technological process and the control logic of flexible packaging bags palletizing production line is introduced. Palletizing process of the production line realized automation by means of a control system based on programmable logic controller (PLC). It has the advantages of simple structure, reliable and easy maintenance etc.

Maximizing the peak production rate in off-line comprehensive two-dimensional liquid chromatography with mass spectrometry detection

NARCIS (Netherlands)

Eeltink, S.; Dolman, S.; Ursem, M.; Swart, R.; McLeod, F.; Schoenmakers, P.J.

2009-01-01

This article describes an optimization strategy to obtain the best possible performance in the shortest analysis time—called the peak production rate—for comprehensive off-line two-dimensional liquid chromatography. The demands on column technology (particle size and column length) and LC conditions

Reengineering a PC-based System into the Mobile Device Product Line

DEFF Research Database (Denmark)

Zhang, Weishan; Jarzabek, Stanislaw; Loughran, Neil

2003-01-01

There is a growing demand to port existing PC-based software systems to mobile device platforms. Systems running on mobile devices share basic characteristics with their PC-based counterparts, but differ from them in details of user interfaces, application models, etc. Systems running on mobile...... devices must also perform well using less memory than PC-based systems. Mobile devices themselves are different from each other in many ways, too. We describe how we made an existing PC-based City Guide System available on a wide range of mobile devices, in a cost-effective way. We applied "reengineering...... into a product line architecture" approach to achieve the goal. Our product line architecture facilitates reuse via generation. We generate specific City Guide Systems for target platforms including PC, Pocket PC and other mobile devices, from generic meta-components that form the City Guide System product line...

Bucket Brigades to Increase Productivity in a Luxury Assembly Line

Directory of Open Access Journals (Sweden)

Filippo De Carlo

2013-08-01

Full Text Available One of the most challenging issues in manual assembly lines is to achieve the best balance of workloads. There are many analytic approaches to solve this problem, but they are often neglected, since they are time-consuming and require high level engineering skills. Fashion bags packaging lines must comply with a number of different products with low production volumes, while the organization of the line is often under the mere responsibility of the foreman, who balances workloads in an empirical way. The aim of this work is to evaluate the effectiveness of the arrangement of bucket brigades (BBs for an assembly line of luxury handbags. To do this, it was decided to perform a testing activity in a company producing fashion handbags in order to compare the self-made design with the BBs and with a simple assembly line balancing problem algorithm. The originality of this research lies in the fact that there are no studies in the literature on BBs applied to the packaging of highly variable small batches. The results were excellent, showing the advantages of BBs in terms of flexibility, the reduction of work in the process and the ability to handle small anomalies.

A/T test system for production line; Seisan line yo A/T test system

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-10

This paper introduces an A/T test system for production line made by Meidensha, Inc. Rates and technology of mounting auto-transmissions (A/T) in recent automobiles are improving year after year. A/T production line testers were fabricated and supplied, including those for European countries. This system has the following features: the system employs low inertia AC motor, and is capable of performing tests in close conditions to actual cars; an insulated gate bipolar transistor (IGBT) inverter was employed to achieve control accuracy improvement and noise reduction; high-velocity transient measurement is possible by using a computer system based on the WindowsNT; a solenoid current slant control was employed to respond to electronically controlled A/T; and noise and vibration shift feeling instrumentation can also be used on option. Number of supply is four sets of front engine/front wheel drive (FF) car A/T testers for overseas countries, and two sets of FF A/T tests for use in Japan. (NEDO)

Heat integration in processes with diverse production lines: A comprehensive framework and an application in food industry

International Nuclear Information System (INIS)

Miah, J.H.; Griffiths, A.; McNeill, R.; Poonaji, I.; Martin, R.; Yang, A.; Morse, S.

2014-01-01

Highlights: • A new practical heat integration framework was developed for complex and diverse production lines. • Heat recovery was maximised by direct and indirect heat integration at zonal and factory levels. • A novel approach to stream data extraction was proposed to account for both stream capacity and availability. • A case study was carried out on a multi-product confectionery factory. - Abstract: Heat integration is a key measure to improving energy efficiency and maximising heat recovery. Since the advent of Pinch analysis in the 1980s, direct and indirect integration approaches have developed in separate domains with very few examples where both approaches are utilised together to maximise heat recovery. This paper presents a novel decision-making framework for heat integration in complex and diverse production lines, with the aim to provide the user with a step-by-step guide to evaluate all heat recovery opportunities through a combination of direct and indirect heat integration. This framework involves analysis at both the zonal level and the factory level. The proposed framework was applied to a case study based on a confectionery factory in the UK that manufactured multiple products across a diverse range of food technologies. It demonstrates that the framework can effectively identify the significant streams to be considered in the heat integration analysis, and address practical factors such as diverse production times, geographical proximity, and potential of compromise to product quality when the direct and indirect heat integration opportunities are proposed and assessed both within and between production zones. This practical framework has the potential to benefit the wider food industry and beyond

Physiological response and productivity of safflower lines under water deficit and rehydration.

Science.gov (United States)

Bortolheiro, Fernanda P A P; Silva, Marcelo A

2017-01-01

Water deficit is one of the major stresses affecting plant growth and productivity worldwide. Plants induce various morphological, physiological, biochemical and molecular changes to adapt to the changing environment. Safflower (Carthamus tinctorius L.), a potential oil producer, is highly adaptable to various environmental conditions, such as lack of rainfall and temperatures. The objective of this work was to study the physiological and production characteristics of six safflower lines in response to water deficit followed by rehydration. The experiment was conducted in a protected environment and consisted of 30 days of water deficit followed by 18 days of rehydration. A differential response in terms of photosynthetic pigments, electrolyte leakage, water potential, relative water content, grain yield, oil content, oil yield and water use efficiency was observed in the six lines under water stress. Lines IMA 04, IMA 10, IMA 14 showed physiological characteristics of drought tolerance, with IMA 14 and IMA 16 being the most productive after water deficit. IMA 02 and IMA 21 lines displayed intermediate characteristics of drought tolerance. It was concluded that the lines responded differently to water deficit stress, showing considerable genetic variation and influence to the environment.

Physiological response and productivity of safflower lines under water deficit and rehydration

Directory of Open Access Journals (Sweden)

FERNANDA P.A.P. BORTOLHEIRO

2017-12-01

Full Text Available ABSTRACT Water deficit is one of the major stresses affecting plant growth and productivity worldwide. Plants induce various morphological, physiological, biochemical and molecular changes to adapt to the changing environment. Safflower (Carthamus tinctorius L., a potential oil producer, is highly adaptable to various environmental conditions, such as lack of rainfall and temperatures. The objective of this work was to study the physiological and production characteristics of six safflower lines in response to water deficit followed by rehydration. The experiment was conducted in a protected environment and consisted of 30 days of water deficit followed by 18 days of rehydration. A differential response in terms of photosynthetic pigments, electrolyte leakage, water potential, relative water content, grain yield, oil content, oil yield and water use efficiency was observed in the six lines under water stress. Lines IMA 04, IMA 10, IMA 14 showed physiological characteristics of drought tolerance, with IMA 14 and IMA 16 being the most productive after water deficit. IMA 02 and IMA 21 lines displayed intermediate characteristics of drought tolerance. It was concluded that the lines responded differently to water deficit stress, showing considerable genetic variation and influence to the environment.

Discussion after implementation of possible ergonomics contributions in production lines automation project

Directory of Open Access Journals (Sweden)

José Adriano Canton

2016-11-01

Full Text Available This paper addresses the issue of work spaces designed based on Activity-Centered Ergonomics. The aim was to reflect on the role of Ergonomics in the design of productive situations in order to anticipate and mitigate the emergence of new constraints. This study was developed using a case study from the packaging industry, where an automated line was implemented to mitigate the injuries suffered as result of the manual system. This article was based on the results of an Ergonomic Work Analysis of the solution implemented, and the subsequent analysis of this design process. It was found that the adopted solution does not have enough leeway for dealing with variations inherent to the process, requiring constant interventions in the operation, by the operators in order to free the line to continue work. It was evident that the adopted solution did not involve the participation of important agents such as the operators and the maintenance crew, giving the project a technical vision that was concerned with eliminating the human factor. The conclusion of this study was that the Ergonomics integrated into the project development favors the collective construction of analysis of the research, and consequently, the development of more effective solutions.

Developing Product Lines with 3rd-party components

NARCIS (Netherlands)

De Jonge, M.

2007-01-01

The trends toward product line development and toward adopting more 3rd-party software are hard to combine. The reason is that productlines demand fine control over the software (e.g., for diversity management), while 3rd-party software (almost by definition) provides only little or no control. A

Integrating Theory and Practice: Applying the Quality Improvement Paradigm to Product Line Engineering

Science.gov (United States)

Stark, Michael; Hennessy, Joseph F. (Technical Monitor)

2002-01-01

My assertion is that not only are product lines a relevant research topic, but that the tools used by empirical software engineering researchers can address observed practical problems. Our experience at NASA has been there are often externally proposed solutions available, but that we have had difficulties applying them in our particular context. We have also focused on return on investment issues when evaluating product lines, and while these are important, one can not attain objective data on success or failure until several applications from a product family have been deployed. The use of the Quality Improvement Paradigm (QIP) can address these issues: (1) Planning an adoption path from an organization's current state to a product line approach; (2) Constructing a development process to fit the organization's adoption path; (3) Evaluation of product line development processes as the project is being developed. The QIP consists of the following six steps: (1) Characterize the project and its environment; (2) Set quantifiable goals for successful project performance; (3) Choose the appropriate process models, supporting methods, and tools for the project; (4) Execute the process, analyze interim results, and provide real-time feedback for corrective action; (5) Analyze the results of completed projects and recommend improvements; and (6) Package the lessons learned as updated and refined process models. A figure shows the QIP in detail. The iterative nature of the QIP supports an incremental development approach to product lines, and the project learning and feedback provide the necessary early evaluations.

Modal Transition Systems as the Basis for Interface Theories and Product Lines

DEFF Research Database (Denmark)

Nyman, Ulrik

and a subset of modal transition systems is proved. The developed interface theory, which can describe liveness properties, is also applied as a behavioral variability theory for product line development. The two last papers of the thesis concern themselves with modal and mixed transition systems. The first....... It also proves PSPACE-hardness for consistency of mixed specifications and establishes a number of reductions between the different decision problems. Keywords: Modeling, Software Product Lines, Embedded Software, Modal Refinement, Labeled Transition Systems, Modal Transition Systems, Mixed Transition......This thesis presents research taking its outset in component-based software development, interface theory and software product lines, as well as modeling formalisms for describing component based software systems and their interfaces. The main part of the thesis consists of five papers. The first...

An analysis model of the secondary tunnel lining considering ground-primary support-secondary lining interaction

Energy Technology Data Exchange (ETDEWEB)

Seo, Seong-Ho; Chang, Seok-Bue [Yooshin Engineering Corporation, Seoul(Korea); Lee, Sang-Duk [Ajou University, Suwon(Korea)

2002-06-30

It is the common practice to over design the reinforcement for the secondary tunnel lining due to the lack of rational insight into the ground loosening loads, and due to the conservative application of the empirical design methods. The main loads of the secondary lining are the ground loosening loads and the ground water pressure, and the ground load is critical in the reinforcement design of the secondary lining in the case of drained tunnel. If the external load is absent around a tunnel. the reasons of the load for secondary tunnel lining are the deterioration of the primary supports such as shotcrete, steel rib, and rock bolts. Accordingly, the analysis method considering the ground-primary supports-secondary lining interaction should be required for the rational design of the secondary tunnel lining. In this paper, the interaction was conceptually described by the simple mass-spring model and the load transfer from the ground and primary supports to the secondary lining is showed by the ground-primary supports-secondary lining reaction curves for the theoretical solution of a circular tunnel, And also, the application of this proposed model to numerical analysis is verified in order to check the potential for the tunnel with the complex analysis conditions. (author). 8 refs., 2 tabs., 7 figs.

Base Stock Policy in a Join-Type Production Line with Advanced Demand Information

Science.gov (United States)

Hiraiwa, Mikihiko; Tsubouchi, Satoshi; Nakade, Koichi

Production control such as the base stock policy, the kanban policy and the constant work-in-process policy in a serial production line has been studied by many researchers. Production lines, however, usually have fork-type, join-type or network-type figures. In addition, in most previous studies on production control, a finished product is required at the same time as arrival of demand at the system. Demand information is, however, informed before due date in practice. In this paper a join-type (assembly) production line under base stock control with advanced demand information in discrete time is analyzed. The recursive equations for the work-in-process are derived. The heuristic algorithm for finding appropriate base stock levels of all machines at short time is proposed and the effect of advanced demand information is examined by simulation with the proposed algorithm. It is shown that the inventory cost can decreases with little backlogs by using the appropriate amount of demand information and setting appropriate base stock levels.

Products of Snowflaked Euclidean Lines Are Not Minimal for Looking Down

Directory of Open Access Journals (Sweden)

Joseph Matthieu

2017-11-01

Full Text Available We show that products of snowflaked Euclidean lines are not minimal for looking down. This question was raised in Fractured fractals and broken dreams, Problem 11.17, by David and Semmes. The proof uses arguments developed by Le Donne, Li and Rajala to prove that the Heisenberg group is not minimal for looking down. By a method of shortcuts, we define a new distance d such that the product of snowflaked Euclidean lines looks down on (RN , d, but not vice versa.

Integrated configurable equipment selection and line balancing for mass production with serial-parallel machining systems

Science.gov (United States)

Battaïa, Olga; Dolgui, Alexandre; Guschinsky, Nikolai; Levin, Genrikh

2014-10-01

Solving equipment selection and line balancing problems together allows better line configurations to be reached and avoids local optimal solutions. This article considers jointly these two decision problems for mass production lines with serial-parallel workplaces. This study was motivated by the design of production lines based on machines with rotary or mobile tables. Nevertheless, the results are more general and can be applied to assembly and production lines with similar structures. The designers' objectives and the constraints are studied in order to suggest a relevant mathematical model and an efficient optimization approach to solve it. A real case study is used to validate the model and the developed approach.

Introducing buffer inventories in the RBD analysis of process production systems

International Nuclear Information System (INIS)

Macchi, Marco; Kristjanpoller, Fredy; Garetti, Marco; Arata, Adolfo; Fumagalli, Luca

2012-01-01

The throughput analysis is an important issue for the design and operations management of process production lines. The throughput of a line depends on the availability and nominal throughput of its machines. Further on, it is influenced by the accumulation process of production material stocked into buffers along the line; hence, the buffer inventory level is also a relevant variable that has to be considered when assessing the throughput of the line. The present paper is particularly concerned with using such an assessment for supporting maintenance decisions. The buffer inventory level should provide the proper isolation time before the buffer becomes empty, so that, during this time, a maintenance intervention can be carried on at a failed machine upward, without causing a propagation of the effect of the failure in the machines downward (the so called ‘material starvation’). Alike, it should guarantee the proper isolation time before reaching the complete utilisation of the buffer capacity, so that also during this time a maintenance intervention is possible at a failed machine downward without causing a propagation of the effect of the failure in the machines upward (the so called ‘blocking of production’). This strategy is particularly interesting in the process industry where the capital cost of equipment is high and the holding cost of material is low. Hence, the isolation times before reaching ‘material starvation’ or ‘blocking of production’ have to be properly studied in order to make an accurate analysis of their effect on the throughput of the line. The present paper provides a model to this end, derived by extending the well known Reliability Block Diagram (RBD) method, currently used in the normal duties of a maintenance engineer. The usual RBD availability analysis is integrated by a state space analysis through which isolation times can be analysed. Besides, an empirical study – the case of a production line taken out from the

On-line analysis of reactor noise using time-series analysis

International Nuclear Information System (INIS)

McGevna, V.G.

1981-10-01

A method to allow use of time series analysis for on-line noise analysis has been developed. On-line analysis of noise in nuclear power reactors has been limited primarily to spectral analysis and related frequency domain techniques. Time series analysis has many distinct advantages over spectral analysis in the automated processing of reactor noise. However, fitting an autoregressive-moving average (ARMA) model to time series data involves non-linear least squares estimation. Unless a high speed, general purpose computer is available, the calculations become too time consuming for on-line applications. To eliminate this problem, a special purpose algorithm was developed for fitting ARMA models. While it is based on a combination of steepest descent and Taylor series linearization, properties of the ARMA model are used so that the auto- and cross-correlation functions can be used to eliminate the need for estimating derivatives. The number of calculations, per iteration varies lineegardless of the mee 0.2% yield strength displayed anisotropy, with axial and circumferential values being greater than radial. For CF8-CPF8 and CF8M-CPF8M castings to meet current ASME Code S acid fuel cells

Using contract mechanisms to coordinate product line decisions

NARCIS (Netherlands)

Nalla, V.R.; Venugopal, V.; Veen, van der J.A.A.

2008-01-01

In this paper we design contract mechanisms to increase the efficiency of product line decisions in a Supply Chain (SC). A two stage SC with a buyer and the supplier is considered. The end consumers are comprised of two segments with different willingness to pay. The final demand and the segments’

A Role-Playing Game for a Software Engineering Lab: Developing a Product Line

Science.gov (United States)

Zuppiroli, Sara; Ciancarini, Paolo; Gabbrielli, Maurizio

2012-01-01

Software product line development refers to software engineering practices and techniques for creating families of similar software systems from a basic set of reusable components, called shared assets. Teaching how to deal with software product lines in a university lab course is a challenging task, because there are several practical issues that…

On-line and off-line data analysis for the EUSO-TA experiment

International Nuclear Information System (INIS)

Piotrowski, Lech Wiktor; Casolino, Marco; Conti, Livio; Ebisuzaki, Toshikazu; Fornaro, Claudio; Kawasaki, Yoshiya; Hachisu, Yusuke; Ohmori, Hitoshi; De Santis, Cristian; Shinozaki, Kenji; Takizawa, Yoshiyuki; Uehara, Yoshihiro

2015-01-01

We show the principles of the communication protocol, on-line calibration, off-line data format as well as basic visualisation and data analysis software implemented for the EUSO-TA on-ground experiment, being the first step towards implementation in a future space based mission. EUSO-TA is an on-ground detector for measuring UV (290–430 nm) light from extensive air showers induced by cosmic rays. It is a prototype experiment for the JEM-EUSO space-borne mission, built according to the same constraints of low mass, low power consumption and thus low computing power. Nevertheless, it needs to process a huge amount of data in short time, taking 2.5μs exposures for 2304 channels. The low processing power and high time resolution require an efficient communication protocol and simple yet powerful algorithms for on-line analysis. The off-line data format is designed for storing a huge amount of data, at the same time allowing easy access, analysis and sharing. Its structure is scalable and adjustable to different experimental designs. It is independent of the data origin, whether it is hardware or a Monte-Carlo simulator. Use of object-oriented techniques and the ROOT framework allows rapid development of dedicated analysis software, such as a Python based quick-view program described herein. Basic capabilities of the software, such as display of the focal surface, light curves and calibration data are shown in this paper

On-line and off-line data analysis for the EUSO-TA experiment

Energy Technology Data Exchange (ETDEWEB)

Piotrowski, Lech Wiktor, E-mail: lech.piotrowski@riken.jp [RIKEN, Wako (Japan); Casolino, Marco [RIKEN, Wako (Japan); INFN and Univ. Rome Tor Vergata, Rome (Italy); Conti, Livio [International Telematic University UNINETTUNO, Rome (Italy); Ebisuzaki, Toshikazu [RIKEN, Wako (Japan); Fornaro, Claudio [International Telematic University UNINETTUNO, Rome (Italy); Kawasaki, Yoshiya; Hachisu, Yusuke; Ohmori, Hitoshi [RIKEN, Wako (Japan); De Santis, Cristian [INFN and Univ. Rome Tor Vergata, Rome (Italy); Shinozaki, Kenji [Institute for Astronomy and Astrophysics, Kepler Center, University of Tübingen, Sand 6, D-72076 Tübingen (Germany); RIKEN, Wako (Japan); Takizawa, Yoshiyuki; Uehara, Yoshihiro [RIKEN, Wako (Japan)

2015-02-11

We show the principles of the communication protocol, on-line calibration, off-line data format as well as basic visualisation and data analysis software implemented for the EUSO-TA on-ground experiment, being the first step towards implementation in a future space based mission. EUSO-TA is an on-ground detector for measuring UV (290–430 nm) light from extensive air showers induced by cosmic rays. It is a prototype experiment for the JEM-EUSO space-borne mission, built according to the same constraints of low mass, low power consumption and thus low computing power. Nevertheless, it needs to process a huge amount of data in short time, taking 2.5μs exposures for 2304 channels. The low processing power and high time resolution require an efficient communication protocol and simple yet powerful algorithms for on-line analysis. The off-line data format is designed for storing a huge amount of data, at the same time allowing easy access, analysis and sharing. Its structure is scalable and adjustable to different experimental designs. It is independent of the data origin, whether it is hardware or a Monte-Carlo simulator. Use of object-oriented techniques and the ROOT framework allows rapid development of dedicated analysis software, such as a Python based quick-view program described herein. Basic capabilities of the software, such as display of the focal surface, light curves and calibration data are shown in this paper.

Product Line Enabled Intelligent Mobile Middleware

DEFF Research Database (Denmark)

Zhang, Weishan; Kunz, Thomas; Hansen, Klaus Marius

2007-01-01

research project called PLIMM that focuses on user-centered application scenarios. PLIMM is designed based on software product line ideas which make it possible for specialized customization and optimization for different purposes and hardware/software platforms. To enable intelligence, the middleware...... needs access to a range of context models. We model these contexts with OWL, focusing on user-centered concepts. The basic building block of PLIMM is the enhanced BDI agent where OWL context ontology logic reasoning will add indirect beliefs to the belief sets. Our approach also addresses the handling...

Study of multivariate analysis of quantitative traits in Iranian pumpkin lines

Directory of Open Access Journals (Sweden)

Yadegari Mehrab

2017-01-01

Full Text Available In this study, seed yield production and its different components fruit length, fruit diameter, fruit length/fruit diameter ratio (FL/FD, diameter of flesh, diameter of seed core, fruit weight, weight of 1000 seed from 24 lines of pumpkin grown in Iran was examined. Twenty-five characters in all plant lines were measured by Descriptor (UPOV and data were subjected to cluster analysis. Results showed that plants lines were divided in four groups. In all groups, regression comparisons were made for modeling the effect of different characters on seed yield, results also showed that fruit weight and fruit length in all groups had the most direct effect on seed yield. In conclusion, these traits are suggested as the best indirect selection criteria to improve the seed yield genetically in Cucurbita spp. genotypes especially in preliminary generation of breeding and selection programs.

Research of Control System and Fault Diagnosis of the Sound-absorbing Board Production Line

Directory of Open Access Journals (Sweden)

Yanjun Xiao

2014-08-01

Full Text Available Programmable Logic Controller is the core of the control system of the sound- absorbing board production line and the design of fault diagnosis is an essential modules in the sound- absorbing board production line. The article discourses the application of PLC in the control system of the production line, and designs the methods of grading treatment and prevention of troubles, which makes use of PLC’S logic functions. The method has good expansibility, and has good guidance to the fault diagnosis in other automation equipments.

A software product line approach to enhance a meta-scheduler middleware

International Nuclear Information System (INIS)

Scheidt, Rafael F; Schmidt, Katreen; Pessoa, Gabriel M; Viera, Matheus A; Dantas, Mario

2012-01-01

Software Projects in general tend to get more software reuse and componentization in order to reduce time, cost and new products resources. The need for techniques and tools to organize projects of higher quality in less time is one of the greatest challenges of Software Engineering. The Software Product Line is proposed to organize and systematically assist the development of new products in series at the same domain. In this context, this paper is proposed to apply the Software Product Line approach in Distributed Computing Environments. In projects that involve Distributed Environments, each version of the same product can generate repeatedly the same artifacts in a product that evolves its characteristics; however there is a principal architecture with variations of components. The goal of the proposed approach is to analyze the actual process and propose a new approach to develop new projects reusing the whole architecture, components and documents, starting with a solid base and creating new products focusing in new functionalities. We expect that with the application of this approach give support to the development of projects in Distributed Computing Environment.

Parameters Investigation of Mathematical Model of Productivity for Automated Line with Availability by DMAIC Methodology

Directory of Open Access Journals (Sweden)

Tan Chan Sin

2014-01-01

Full Text Available Automated line is widely applied in industry especially for mass production with less variety product. Productivity is one of the important criteria in automated line as well as industry which directly present the outputs and profits. Forecast of productivity in industry accurately in order to achieve the customer demand and the forecast result is calculated by using mathematical model. Mathematical model of productivity with availability for automated line has been introduced to express the productivity in terms of single level of reliability for stations and mechanisms. Since this mathematical model of productivity with availability cannot achieve close enough productivity compared to actual one due to lack of parameters consideration, the enhancement of mathematical model is required to consider and add the loss parameters that is not considered in current model. This paper presents the investigation parameters of productivity losses investigated by using DMAIC (Define, Measure, Analyze, Improve, and Control concept and PACE Prioritization Matrix (Priority, Action, Consider, and Eliminate. The investigated parameters are important for further improvement of mathematical model of productivity with availability to develop robust mathematical model of productivity in automated line.

Linearized spectrum correlation analysis for line emission measurements.

Science.gov (United States)

Nishizawa, T; Nornberg, M D; Den Hartog, D J; Sarff, J S

2017-08-01

A new spectral analysis method, Linearized Spectrum Correlation Analysis (LSCA), for charge exchange and passive ion Doppler spectroscopy is introduced to provide a means of measuring fast spectral line shape changes associated with ion-scale micro-instabilities. This analysis method is designed to resolve the fluctuations in the emission line shape from a stationary ion-scale wave. The method linearizes the fluctuations around a time-averaged line shape (e.g., Gaussian) and subdivides the spectral output channels into two sets to reduce contributions from uncorrelated fluctuations without averaging over the fast time dynamics. In principle, small fluctuations in the parameters used for a line shape model can be measured by evaluating the cross spectrum between different channel groupings to isolate a particular fluctuating quantity. High-frequency ion velocity measurements (100-200 kHz) were made by using this method. We also conducted simulations to compare LSCA with a moment analysis technique under a low photon count condition. Both experimental and synthetic measurements demonstrate the effectiveness of LSCA.

Verifying Architectural Design Rules of the Flight Software Product Line

Science.gov (United States)

Ganesan, Dharmalingam; Lindvall, Mikael; Ackermann, Chris; McComas, David; Bartholomew, Maureen

2009-01-01

This paper presents experiences of verifying architectural design rules of the NASA Core Flight Software (CFS) product line implementation. The goal of the verification is to check whether the implementation is consistent with the CFS architectural rules derived from the developer's guide. The results indicate that consistency checking helps a) identifying architecturally significant deviations that were eluded during code reviews, b) clarifying the design rules to the team, and c) assessing the overall implementation quality. Furthermore, it helps connecting business goals to architectural principles, and to the implementation. This paper is the first step in the definition of a method for analyzing and evaluating product line implementations from an architecture-centric perspective.

On-line and bulk analysis for the resource industries

International Nuclear Information System (INIS)

Lim, C.S.; Sowerby, B.D.; Tickner, J.R.; Madsen, I.C.

2001-01-01

Nuclear techniques are the basis of many CSIRO on-line and bulk analysis systems that are now widely used in the mineral and energy industries. The continuous analysis and rapid response of these systems have led to improved control of mining, processing and blending operations. This paper reviews recent developments in neutron, gamma-ray and X-ray techniques for on-line and bulk analysis by CSIRO Minerals including neutron techniques for the on-conveyor belt determination of the composition of cement raw meal, the on-line analysis of composition in pyrometallurgical applications, the on-conveyor belt determination of ash in coal, and the rapid and accurate determination of gold in bulk laboratory samples. The paper also discusses a new gamma-ray technique for the on-line determination of ash in coal and the application of X-ray diffraction techniques for the on-line determination of mineralogy in the cement industry

The U-line line balancing problem

NARCIS (Netherlands)

Miltenburg, G.J.; Wijngaard, J.

1994-01-01

The traditional line balancing (LB) problem considers a production line in which stations are arranged consecutively in a line. A balance is determined by grouping tasks into stations while moving forward (or backward) through a precedence network. Recently many production lines are being arranged

Experimental on-line platform for product conceptual design: OpenDesigNet

Directory of Open Access Journals (Sweden)

Teresa Magal-Royo

2013-09-01

Full Text Available This paper highlights the need for using specialised on-line collaborative environments by designers and product engineers who increasingly use Web 2.0 technology to search for information. Although there are professional channels and networks, there is no specific platform which helps during a new product’s conceptualisation phase. Open communication must thus be promoted and encouraged amongst design professionals and companies to form working groups thereby allowing them to work collaboratively in the most open and creative phase of product design, i.e. conceptualisation. The OpenDesigNet (ODN experimental platform has been developed so that designers and small- or medium-sized companies (SMC can access on-line collaborative tools to support the creation and promotion of new on-line products and assess their immediate social impact. This article presents some of the results obtained during the validation phase involving a platform satisfaction survey of design engineering students and has led to a first-hand assessment of the new platform’s potential impact on their professional future.

Line outage contingency analysis including the system islanding scenario

Energy Technology Data Exchange (ETDEWEB)

Hazarika, D.; Bhuyan, S. [Assam Engineering College, Jalukbari, Guwahati 781013 (India); Chowdhury, S.P. [Jadavpur University, Jadavpur, Kolkata 700 032 (India)

2006-05-15

The paper describes an algorithm for determining the line outage contingency of a line taking into account of line over load effect in remaining lines and subsequent tripping of over loaded line(s) leading to possible system split or islanding of a power system. The optimally ordered sparse [B'], [B'] matrices for the integrated system are used for load flow analysis to determine modified values of voltage phase angles [{delta}] and bus voltages [V] to determine the over loading effect on the remaining lines due to outage of a selected line outage contingency. In case of over loading in remaining line(s), the over loaded lines are removed from the system and a topology processor is used to find the islands. A fast decoupled load flow (FDLF) analysis is carried out for finding out the system variables for the islanded (or single island) system by incorporating appropriate modification in the [B'] and [B'] matrices of the integrated system. Line outage indices based on line overload, loss of load, loss of generation and static voltage stability are computed to indicate severity of a line outage of a selected line. (author)

Potential Errors and Test Assessment in Software Product Line Engineering

Directory of Open Access Journals (Sweden)

Hartmut Lackner

2015-04-01

Full Text Available Software product lines (SPL are a method for the development of variant-rich software systems. Compared to non-variable systems, testing SPLs is extensive due to an increasingly amount of possible products. Different approaches exist for testing SPLs, but there is less research for assessing the quality of these tests by means of error detection capability. Such test assessment is based on error injection into correct version of the system under test. However to our knowledge, potential errors in SPL engineering have never been systematically identified before. This article presents an overview over existing paradigms for specifying software product lines and the errors that can occur during the respective specification processes. For assessment of test quality, we leverage mutation testing techniques to SPL engineering and implement the identified errors as mutation operators. This allows us to run existing tests against defective products for the purpose of test assessment. From the results, we draw conclusions about the error-proneness of the surveyed SPL design paradigms and how quality of SPL tests can be improved.

A dynamic programming algorithm for the buffer allocation problem in homogeneous asymptotically reliable serial production lines

Directory of Open Access Journals (Sweden)

Diamantidis A. C.

2004-01-01

Full Text Available In this study, the buffer allocation problem (BAP in homogeneous, asymptotically reliable serial production lines is considered. A known aggregation method, given by Lim, Meerkov, and Top (1990, for the performance evaluation (i.e., estimation of throughput of this type of production lines when the buffer allocation is known, is used as an evaluative method in conjunction with a newly developed dynamic programming (DP algorithm for the BAP. The proposed algorithm is applied to production lines where the number of machines is varying from four up to a hundred machines. The proposed algorithm is fast because it reduces the volume of computations by rejecting allocations that do not lead to maximization of the line's throughput. Numerical results are also given for large production lines.

Defining project scenarios for the agile requirements engineering product-line development questionnaire

OpenAIRE

Feng, Kunwu; Lempert, Meli; Tang, Yan; Tian, Kun; Cooper, Kendra M.L.; Franch Gutiérrez, Javier

2007-01-01

Current agile methods are focused on practices of small, rapid developing and iteration, more people oriented, less documentation projects, and the use of the methods in large, product line projects are somehow difficult. UTD and GESSI have started a project to develop an expert system that can assist a requirements enginer in selecting a requirements engineering process that is well suited for their project, in particular with respect to the use of agile and product line engineering methods....

40 CFR 1051.301 - When must I test my production-line vehicles or engines?

Science.gov (United States)

2010-07-01

... vehicles or engines? 1051.301 Section 1051.301 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM RECREATIONAL ENGINES AND VEHICLES Testing Production-Line Vehicles and Engines § 1051.301 When must I test my production-line vehicles or engines? (a...

Line width and line shape analysis in the inductively coupled plasma by high resolution Fourier transform spectrometry

International Nuclear Information System (INIS)

Faires, L.M.; Palmer, B.A.; Brault, J.W.

1984-01-01

High resolution Fourier transform spectrometry has been used to perform line width and line shape analysis of eighty-one iron I emision lines in the spectral range 290 to 390nm originating in the normal analytical zone of an inductively coupled plasma. Computer programs using non-linear least squares fitting techniques for line shape analysis were applied to the fully resolved spectra to determine Gaussian and Lorentzian components of the total observed line width. The effect of noise in the spectrum on the precision of the line fitting technique was assessed, and the importance of signal to noise ratio for line shape analysis is discussed. Translational (Doppler) temperatures were calculated from the Gaussian components of the line width and were found to be on the order of 6300 0 K. The excitation temperature of iron I was also determined from the same spectral data by the spectroscopic slope method based on the Einstein-Boltzmann expression for spectral intensity and was found to be on the order of 4700 0 K. 31 references

The role of off-line and online strategies for successful product positioning

OpenAIRE

Yaneva D. E.; Zlateva D. A.

2015-01-01

The study of the article is done on off-line and online strategies that companies use for their successful positioning. The goal is to establish the role and the significance of the strategies for successful product positioning in off-line and online environment.

Statistical Methods in Assembly Quality Management of Multi-Element Products on Automatic Rotor Lines

Science.gov (United States)

Pries, V. V.; Proskuriakov, N. E.

2018-04-01

To control the assembly quality of multi-element mass-produced products on automatic rotor lines, control methods with operational feedback are required. However, due to possible failures in the operation of the devices and systems of automatic rotor line, there is always a real probability of getting defective (incomplete) products into the output process stream. Therefore, a continuous sampling control of the products completeness, based on the use of statistical methods, remains an important element in managing the quality of assembly of multi-element mass products on automatic rotor lines. The feature of continuous sampling control of the multi-element products completeness in the assembly process is its breaking sort, which excludes the possibility of returning component parts after sampling control to the process stream and leads to a decrease in the actual productivity of the assembly equipment. Therefore, the use of statistical procedures for continuous sampling control of the multi-element products completeness when assembled on automatic rotor lines requires the use of such sampling plans that ensure a minimum size of control samples. Comparison of the values of the limit of the average output defect level for the continuous sampling plan (CSP) and for the automated continuous sampling plan (ACSP) shows the possibility of providing lower limit values for the average output defects level using the ACSP-1. Also, the average sample size when using the ACSP-1 plan is less than when using the CSP-1 plan. Thus, the application of statistical methods in the assembly quality management of multi-element products on automatic rotor lines, involving the use of proposed plans and methods for continuous selective control, will allow to automating sampling control procedures and the required level of quality of assembled products while minimizing sample size.

PROMOTION OF PRODUCTS AND ANALYSIS OF MARKET OF POWER TOOLS

Directory of Open Access Journals (Sweden)

Sergey S. Rakhmanov

2014-01-01

Full Text Available The article describes the general situation of power tools on the market, both in Russia and in the world. A comparative analysis of competitors, market structure analysis of power tools, as well as assessment of competitiveness of some major product lines. Also the analysis methods of promotion used by companies selling tools, competitive analysis range Bosch, the leader in its segment, power tools available on the market in Russia.

Feasibility Study for Installing Machine in Production Line to Avoid Particle Contamination Based on CFD Simulation

Science.gov (United States)

Khaokom, Adisorn; Thongsri, Jatuporn

2017-10-01

Ventilation system inside production line for electronic component production needs to meet the factory standard. Because it can eliminate small particles which may cause of human or machine in production as well as it can distribute the circulating air temperature uniformly. CFD is used in this research in order to study the feasibility and plan for machine layout in production line before actual installation. The simulation shows the airflow in every area inside production line. From simulation with releasing the particles from human and machine is found that this ventilation system generates airflow that makes most particles float out of the machines and no particle downs to the conveyor, it results to contamination. In addition, the simulation also shows the range of 19-26 °C air temperature that meets the factory standard. The results of this research are the parts of the data to renovate the production line to get more efficiency and proper on the production.

Huh-7 cell line as an alternative cultural model for the production of human like erythropoietin (EPO

Directory of Open Access Journals (Sweden)

Kausar Humera

2011-11-01

Full Text Available Abstract Background and Aims Erythropoietin (EPO is a glycoprotein hormone which is required to regulate the production of red blood cells. Deficiency of EPO is known to cause anemia in chronically infected renal patients and they require regular blood transfusion. Availability of recombinant EPO has eliminated the need for blood transfusion and now it is extensively used for the treatment of anemia. Glycosylation of erythropoietin is essential for its secretion, stability, protein conformation and biological activity. However, maintenance of human like glycosylation pattern during manufacturing of EPO is a major challenge in biotechnology. Currently, Chinese hamster ovary (CHO cell line is used for the commercial production of erythropoietin but this cell line does not maintain glycosylation resembling human system. With the trend to eliminate non-human constituent from biopharmaceutical products, as a preliminary approach, we have investigated the potential of human hepatoma cell line (Huh-7 to produce recombinant EPO. Materials and methods Initially, the secretory signal and Kozak sequences was added before the EPO mature protein sequence using overlap extension PCR technique. PCR-amplified cDNA fragments of EPO was inserted into mammalian expression vector under the control of the cytomegalovirus (CMV promoter and transiently expressed in CHO and Huh-7 cell lines. After RT-PCR analysis, ELISA and Western blotting was performed to verify the immunochemical properties of secreted EPO. Results Addition of secretory signal and Kozak sequence facilitated the extra-cellular secretion and enhanced the expression of EPO protein. Significant expression (P Conclusion Huh-7 cell line has a great potential to produce glycosylated EPO, suggesting the use of this cell line to produce glycoproteins of the therapeutic importance resembling to the natural human system.

Feasibility evaluations for the integration of laser butt welding of tubes in industrial pipe coil production lines

Science.gov (United States)

Penasa, Mauro; Colombo, Enrico; Giolfo, Mauro

1994-09-01

Due to the good performance shown by laser welded joints, to the quality and repeatability achievable by this welding technique and to its high process productivity, a feature inherent to the laser technology which, together with its high flexibility, allows different operations to be performed by a single source, consistent savings in a production line may be obtained. Therefore laser welding techniques may be of high relevance for industrial applications, provided that a sufficient attention is paid to avoiding a low utilization time to the operating laser source. The paper describes a feasibility study for the integration of a laser source as an automatic unit for circumferential butt welding of tubes in production lines of pipe coils, just before the cold bending station. Using a 6 kW CO2 source, thickness ranging from 3.5 to 11.2 mm in carbon, low alloyed Cr-Mo and austenitic stainless steels, have been successfully welded. Cr-Mo steels require on line preheating treatment, which however can be achieved by laser defocused passes just before welding. The results of the preliminary qualification performed on laser welded joints of the involved topologies of product (materials, diameters and thicknesses) are described together with technological tests required for approval: laser circumferential butt welding of tubes has proven to be effective, with satisfactory and repeatable results and good joint performances. An exhaustive comparison with current welding techniques (TIG, MIG) is then carried out, along with a detailed analysis of the potential advantages and benefits which may be expected by using the laser welding technique, as well as with a first estimation of the investments and running costs. Since laser productivity is saturated only at a rough 35% during the year, an accurate analysis of other possible applications and of a possible lay out of a laser working cell integrated in the factory production lines is performed. Usually little attention is

40 CFR 1051.305 - How must I prepare and test my production-line vehicles or engines?

Science.gov (United States)

2010-07-01

... production-line vehicles or engines? 1051.305 Section 1051.305 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM RECREATIONAL ENGINES AND VEHICLES Testing Production-Line Vehicles and Engines § 1051.305 How must I prepare and test my production...

Spontaneous pyrogen production by mouse histiocytic and myelomonocytic tumor cell lines in vitro.

Science.gov (United States)

Bodel, P

1978-05-01

Tumor-associated fever occurs commonly in acute leukemias and lymphomas. We investigated the capacity for in vitro production of pyrogen by three mouse histiocytic lymphoma cell lines (J-774, PU5-1.8, p 388 D1), one myelomonoyctic line (WEHI-3), and tow lymphoma-derived lines, RAW-8 and R-8. Pyrogen was released spontaneously into the culture medium during growth by all cell lines with macrophage or myeloid characteristics including lysozyme production; R-8 cells, of presumed B-lymphocyte origin, did not produce pyrogen. When injected into mice, the pyrogens gave fever curves typical of endogenous pyrogen, were inactived by heating to 56 degrees C and by pronase digestion, and appeared to be secreted continuously by viable cells. Two pyrogenic molecular species produced by H-774 cells were identified by Sephadex filtration, one of mol wt approximately equal to 30,000, and the other greater than or equal to 60,000. By contrast, three carcinoma cell lines of human origin and SV-40 3T3 mouse fibroblasts did not produce pyrogen in vitro. These results suggest that some malignant cells derived from phagocytic cells of bone marrow origin retain their capacity for pyrogen production, and may spontaneously secrete pyrogen during growth.

Production of reciprocal translocation lines and genetical analysis of tetravalent behavior in barley

Energy Technology Data Exchange (ETDEWEB)

Makino, Tokuhiko

1988-03-01

The seeds of a barley cultivar, Chikurinibaraki No.1 and of an early mutant line, Ea 52, derived from it were exposed to the external irradiation of gamma ray and thermal neutrons, and to the internal irradiation with the alpha ray from the nuclear reaction B-10 (n, alpha) Li-7 generated by the thermal neutron irradiation of B-10 imbibed seeds. The reciprocal translocation induced by these irradiation was detected and bred in the pedigrees of irradiated materials by the selection in terms of the partial sterility of seeds. The examination of seed fertility and chromosome pairing at the MI of meiosis of the F/sub 1/ hybrid between the selected lines and the original cultivar was also used. Consequently, 50 homozygous lines of reciprocal translocation were confirmed. The tester lines for translocated chromosomes were established by the cytological examination of the chromosome pairing in the hybrids between each two of the tester lines. The investigation of the inheritance of translocation heterozygotes showed that most of the newly obtained lines differently behaved from the expectation on the genetical basis of reciprocal translocation. (Kako, I.).

Production of reciprocal translocation lines and genetical analysis of tetravalent behavior in barley

International Nuclear Information System (INIS)

Makino, Tokuhiko

1988-01-01

The seeds of a barley cultivar, Chikurinibaraki No.1 and of an early mutant line, Ea 52, derived from it were exposed to the external irradiation of gamma ray and thermal neutrons, and to the internal irradiation with the alpha ray from the nuclear reaction B-10 (n, alpha) Li-7 generated by the thermal neutron irradiation of B-10 imbibed seeds. The reciprocal translocation induced by these irradiation was detected and bred in the pedigrees of irradiated materials by the selection in terms of the partial sterility of seeds. The examination of seed fertility and chromosome pairing at the MI of meiosis of the F 1 hybrid between the selected lines and the original cultivar was also used. Consequently, 50 homozygous lines of reciprocal translocation were confirmed. The tester lines for translocated chromosomes were established by the cytological examination of the chromosome pairing in the hybrids between each two of the tester lines. The investigation of the inheritance of translocation heterozygotes showed that most of the newly obtained lines differently behaved from the expectation on the genetical basis of reciprocal translocation. (Kako, I.)

Genetic comparison of milk production and composition in three maternal rabbit lines

Directory of Open Access Journals (Sweden)

Ayman Gamal Fawzy EL Nagar

2014-12-01

Full Text Available The aim of this study was to compare 3 Spanish maternal rabbit lines (A, V and LP in terms of milk production and composition. These lines were founded on different criteria but selected for litter size at weaning. A total of 194 mature does in their third or higher parity were used. The milk yield of does was recorded at 1, 2, 3, 4, 8, 9, 10, 11, 15, 16 and 17 d post-partum (dpp. The milk production traits studied were weekly milk yield (WMY; g/wk and milk conversion ratio (MCR; grams of litter gain per grams of milk suckled during the first 21  dpp. The milk composition traits studied were fat (%, protein  (%, ash (%, lactose (% and total solids (%. The milk samples to be analysed were collected from each doe at 18 dpp. Data were analysed using single trait mixed and fixed models with and without covariates; the covariates were number born alive (NBA and doe weight at kindling (DW. The overall mean of WMY, during the first 3 wk, was 1547±16 g/wk. Milk yields during the different lactation weeks were for line A 872±39, 1503±39 and 1865±39 g for first, second and third lactation weeks, respectively. In line V, the corresponding values were 919±35, 1633±35 and 2004±35  g, and in line LP, they were 1043±36, 1819±36 and 2254±36  g. Means of MCR were 0.41±0.01, 0.41±0.01 and 0.42±0.01 for A, V and LP lines, respectively. Overall means of fat, protein, ash, lactose and total solids (% were 14.62±0.17, 11.10±0.07, 1.89±0.04, 2.67±0.12 and 30.27±0.24, respectively. The differences between lines for milk production traits were significant except for MCR, while the differences between lines for milk composition traits were not significant. NBA had significant effects on all milk yield traits but had no significant effects on milk composition traits. DW only had a significant effect on weekly milk yield. The parity order had no significant effect either for milk production traits or milk composition traits in multiparous does, except

Performance analysis of flow lines with non-linear flow of material

CERN Document Server

Helber, Stefan

1999-01-01

Flow line design is one of the major tasks in production management. The decision to install a set of machines and buffers is often highly irreversible. It determines both cost and revenue to a large extent. In order to assess the economic impact of any possible flow line design, production rates and inventory levels have to be estimated. These performance measures depend on the allocation of buffers whenever the flow of material is occasionally disrupted, for example due to machine failures or quality problems. The book describes analytical methods that can be used to evaluate flow lines much faster than with simulation techniques. Based on these fast analytical techniques, it is possible to determine a flow line design that maximizes the net present value of the flow line investment. The flow of material through the line may be non-linear, for example due to assembly operations or quality inspections.

RankProdIt: A web-interactive Rank Products analysis tool

Directory of Open Access Journals (Sweden)

Laing Emma

2010-08-01

Full Text Available Abstract Background The first objective of a DNA microarray experiment is typically to generate a list of genes or probes that are found to be differentially expressed or represented (in the case of comparative genomic hybridizations and/or copy number variation between two conditions or strains. Rank Products analysis comprises a robust algorithm for deriving such lists from microarray experiments that comprise small numbers of replicates, for example, less than the number required for the commonly used t-test. Currently, users wishing to apply Rank Products analysis to their own microarray data sets have been restricted to the use of command line-based software which can limit its usage within the biological community. Findings Here we have developed a web interface to existing Rank Products analysis tools allowing users to quickly process their data in an intuitive and step-wise manner to obtain the respective Rank Product or Rank Sum, probability of false prediction and p-values in a downloadable file. Conclusions The online interactive Rank Products analysis tool RankProdIt, for analysis of any data set containing measurements for multiple replicated conditions, is available at: http://strep-microarray.sbs.surrey.ac.uk/RankProducts

Developing a survey to collect expertise in agile product line requirements engineering processes

OpenAIRE

Feng, Kunwu; Lempert, Meli; Tang, Yan; Tian, Kun; Cooper, Kendra M.L.; Franch Gutiérrez, Javier

2007-01-01

Current agile methods are focused on practices of small, rapid developing and iteration, more people oriented, less documentation projects, and the use of the methods in large, product line projects are somehow difficult. UTD and GESSI have started a project to develop an expert system that can assist a requirements enginer in selecting a requirements engineering process that is well suited for their project, in particular with respect to the use of agile and product line engineering methods....

DPLFW: a Framework for the Product-Line-Based Generation of Variable Content Documents

OpenAIRE

Gómez , Abel; Martí , Pau; Penadés , M. Carmen; Canós , José H.

2014-01-01

International audience; Document Product Lines (DPL) is a document engineering methodology that applies product-line engineering principles to the gen-eration of documents in high variability contexts and with high reuse of components. Instead of standalone documents, DPL promotes the defi-nition of families of documents where the members share some common content while differ in other parts. The key for the definition is the avail-ability of a collection of content assets which can be parame...

[Implementation of the HACCP system in the production line of the traditional sandwich in Phnom Penh City, Cambodia].

Science.gov (United States)

Lay, Kruy Sun; Song, Ping; Merch, Keuth; Sakona, Phoeurng; Buisson, Y

2004-02-01

From July 2000 to July 2001, the hazard analysis and critical control points (HACCP) system was implemented to the benefit of the traditional sandwich production in Phnom Penh City Sandwiches were initially analyzed for bacterial indicators among 6 large-scale producers during a 2 months period. In the second stage of the study, two selected producers were involved in the HACCP process. Microbiological analyses revealed a poor sanitary quality of samples from all the production lines tested. Implementation of HACCP method resulted in a reduction of microbial contamination, but this decrease was not significant compared with others steps of HACCP process (chi2 test for trend, p > 0.05). HACCP system was well accepted by producers but routine practices and wrong perception by production-line workers did limit the success of the process. A regulation on the mass catering sector should be part of a large strategy of food safety and environmental health in the city.

Biological insights into the expression of translation initiation factors from recombinant CHOK1SV cell lines and their relationship to enhanced productivity.

Science.gov (United States)

Mead, Emma J; Masterton, Rosalyn J; Feary, Marc; Obrezanova, Olga; Zhang, Lin; Young, Robert; Smales, C Mark

2015-12-15

Translation initiation is on the critical pathway for the production of monoclonal antibodies (mAbs) by mammalian cells. Formation of a closed loop structure comprised of mRNA, a number of eukaryotic initiation factors (eIFs) and ribosomal proteins has been proposed to aid re-initiation of translation and therefore increase global translational efficiency. We have determined mRNA and protein levels of the key components of the closed loop, eIFs (eIF3a, eIF3b, eIF3c, eIF3h, eIF3i and eIF4G1), poly(A)-binding protein (PABP) 1 and PABP-interacting protein 1 (PAIP1), across a panel of 30 recombinant mAb-producing GS-CHOK1SV cell lines with a broad range of growth characteristics and production levels of a model recombinant mAb. We have used a multi-level statistical approach to investigate the relationship between key performance indicators (cell growth and recombinant antibody productivity) and the intracellular amounts of target translation initiation factor proteins and the mRNAs encoding them. We show that high-producing cell lines maintain amounts of the translation initiation factors involved in the formation of the closed loop mRNA, maintaining these proteins at appropriate levels to deliver enhanced recombinant protein production. We then utilize knowledge of the amounts of these factors to build predictive models for and use cluster analysis to identify, high-producing cell lines. The present study therefore defines the translation initiation factor amounts that are associated with highly productive recombinant GS-CHOK1SV cell lines that may be targets for screening highly productive cell lines or to engineer new host cell lines with the potential for enhanced recombinant antibody productivity. © 2015 Authors; published by Portland Press Limited.

Investigation of Genetic Distance among Parental Lines of Hybrid Rice Based on Cluster Analysis of Morphological Traits

Directory of Open Access Journals (Sweden)

A. Baluch-Zehi

2013-06-01

Full Text Available conditions. Thus, these varieties could be suitable option for yield increase and an effective step toward food security. Selection of parental lines has essential role in developing ideal combinations. Therefore, it is essential to study the relationship and genetic diversity among parental lines in hybrid rice. Sixteen hybrid rice parental lines including 6 restorer lines (Poya, Sepidrud, Pajohesh, R2, R9 and IR50 and 5 CMS lines (Neda, Nemat, Dasht, Champa and Amol 3 with their 5 maintainers were studied at Research Farm of Sari Agricultural Sciences and Natural Resources University during 2011. Analysis of variance showed significant variations for all of the studied traits, which shows great diversity among the genotypes. The number of fertile tillers and length to width ratio of grain showed positive and significant correlation with yield. But, grain width showed negative and significant correlation with yield. Results of principal component analysis revealed that 3 components explained 75.64% of the total variations. Cluster analysis at 15 genetic distance criteria grouped genotypes in 4 clusters. In exploration of heterosis phenomenon, parents must be far away from each other. So, the results of this study suggested crosses between CMS lines of Neda A, Nemat A and Champa A with each of restorer lines R9, R2, IR50 and Poya for experimental hybrid seed production.

Methionine sulfoximine supplementation enhances productivity in GS-CHOK1SV cell lines through glutathione biosynthesis.

Science.gov (United States)

Feary, Marc; Racher, Andrew J; Young, Robert J; Smales, C Mark

2017-01-01

In Lonza Biologics' GS Gene Expression System™, recombinant protein-producing GS-CHOK1SV cell lines are generated by transfection with an expression vector encoding both GS and the protein product genes followed by selection in MSX and glutamine-free medium. MSX is required to inhibit endogenous CHOK1SV GS, and in effect create a glutamine auxotrophy in the host that can be complemented by the expression vector encoded GS in selected cell lines. However, MSX is not a specific inhibitor of GS as it also inhibits the activity of GCL (a key enzyme in the glutathione biosynthesis pathway) to a similar extent. Glutathione species (GSH and GSSG) have been shown to provide both oxidizing and reducing equivalents to ER-resident oxidoreductases, raising the possibility that selection for transfectants with increased GCL expression could result in the isolation of GS-CHOKISV cell lines with improved capacity for recombinant protein production. In this study we have begun to address the relationship between MSX supplementation, the amount of intracellular GCL subunit and mAb production from a panel of GS-CHOK1SV cell lines. We then evaluated the influence of reduced GCL activity on batch culture of an industrially relevant mAb-producing GS-CHOK1SV cell line. To the best of our knowledge, this paper describes for the first time the change in expression of GCL subunits and recombinant mAb production in these cell lines with the degree of MSX supplementation in routine subculture. Our data also shows that partial inhibition of GCL activity in medium containing 75 µM MSX increases mAb productivity, and its more specific inhibitor BSO used at a concentration of 80 µM in medium increases the specific rate of mAb production eight-fold and the concentration in harvest medium by two-fold. These findings support a link between the inhibition of glutathione biosynthesis and recombinant protein production in industrially relevant systems and provide a process-driven method for

Modified Starch of Sorghum Mutant Line Zh-30 for High Fiber Muffin Products

Directory of Open Access Journals (Sweden)

D.D.S. Santosa

2009-01-01

Full Text Available Sorghum mutant line Zh-30 is a breeding line developed at the Center for the Application of Isotope and Radiation Technology, BATAN by using mutation techniques. Gamma irradiation with the dose of 300 Gy was used to induce sorghum genetic variation. Through selection processes in several generations, the mutant line Zh-30 was identified to have better agronomic characteristics, better grain quality and higher grain yield than the original variety. Research on modified starch quality of this mutant line was done to identify its potential use in food industry. Functionality of pregelatinized, hydroxypropyl and crosslinked starch of this mutant line (Mutant TexInstant 30 has been studied for its use in high fiber muffin products. Characteristics of high fiber muffins containing 1.50; 3.50 and 5.50% of Mutant Tex-Instant 30 replacement levels to wheat flour were evaluated using both sensory panel and physical test methods. With regard to the sensory parameters, the high fiber muffins containing 1.50 - 5.50 % Mutant Tex-Instant 30 in general were not significantly different compared to the standard reference muffin. Results of physical evaluations showed that all Mutant Tex-Instant 30 containing products retained more moisture during baking than the standard reference. Tenderness of all products decreased at similar rate following 24 and 48 hr of room temperature storage and seven days at freezer temperature. These results suggested that sorghum mutant line Zh-30 starch could be modified and potentially used in food industry as a subtitute of wheat flour.

Modified Starch of Sorghum Mutant Line Zh-30 For High Fiber Muffin Products

International Nuclear Information System (INIS)

Santosa, D. D. S; Human, S

2009-01-01

Sorghum mutant line Zh-30 is a breeding line developed at the Center for the Application of Isotope and Radiation Technology, BATAN by using mutation techniques. Gamma irradiation with the dose of 300 Gy was used to induce sorghum genetic variation. Through selection processes in several generations, the mutant line Zh-30 was identified to have better agronomic characteristics, better grain quality and higher grain yield than the original variety. Research on modified starch quality of this mutant line was done to identify its potential use in food industry. Functionality of pregelatinized, hydroxypropyl and crosslinked starch of this mutant line (Mutant TexInstant 30) has been studied for its use in high fiber muffin products. Characteristics of high fiber muffins containing 1.50; 3.50 and 5.50% of Mutant Tex-Instant 30 replacement levels to wheat flour were evaluated using both sensory panel and physical test methods. With regard to the sensory parameters, the high fiber muffins containing 1.50 - 5.50 % Mutant Tex-Instant 30 in general were not significantly different compared to the standard reference muffin. Results of physical evaluations showed that all Mutant Tex-Instant 30 containing products retained more moisture during baking than the standard reference. Tenderness of all products decreased at similar rate following 24 and 48 hr of room temperature storage and seven days at freezer temperature. These results suggested that sorghum mutant line Zh-30 starch could be modified and potentially used in food industry as a subtitute of wheat flour (author)

Towards Product Lining Model-Driven Development Code Generators

OpenAIRE

Roth, Alexander; Rumpe, Bernhard

2015-01-01

A code generator systematically transforms compact models to detailed code. Today, code generation is regarded as an integral part of model-driven development (MDD). Despite its relevance, the development of code generators is an inherently complex task and common methodologies and architectures are lacking. Additionally, reuse and extension of existing code generators only exist on individual parts. A systematic development and reuse based on a code generator product line is still in its inf...

Product line based ontology reuse in context-aware e-business environment

DEFF Research Database (Denmark)

Zhang, Weishan; Kunz, Thomas

2006-01-01

Improving the reusability of ontology is recognized as increasingly important due to the prevalence of OWL research and applications. But there exists no convincing methodology and tool support in this direction yet. In this paper, we apply ideas from the research and practice with software product...... lines in order to explore this issue. The ontology is developed and managed according to the commonalities and variabilities underlying a specific problem domain. Meta-ontology is used in order to improve the reusability, evolve-ability and customizability of ontology. Another advantage is being able...... to generate needed ontology with the created meta-ontology implemented with XVCL (XML based Variant Configuration Language) technology. We demonstrate our product line based reuse approach with an example B2C application....

Fission product nuclear data obtained by use of an on-line mass spectrometer

International Nuclear Information System (INIS)

Reeder, P.L.; Wright, J.F.; Anderl, R.A.

1975-01-01

A Spectrometer for On-Line Analysis of Radionuclides (SOLAR) has been installed at a 1 MW TRIGA reactor at Washington State University. Fission product ions from a combination target/ion source located within the thermal column are brought out to a 60 0 magnetic sector mass spectrometer. Surface ionization provides copious beams of Rb + and Cs + ions and less intense beams of Br - and I - ions with negligible contamination by other elements. About 40 fission product nuclides can thus be chemically and physically separated in times of less than 1 second. Past results on independent and cumulative fission yields along with measurements of half-lives of some very neutron-rich nuclides are presented. Current work on delayed-neutron emission probabilities and energy spectra of delayed neutrons from individual nuclides is described. (7 tables, 2 figures) (U.S.)

Study of the on line radioactive multicharged ion production

International Nuclear Information System (INIS)

Lecesne, N.

1997-01-01

This work is directly related to the SPIRAL project (Systeme de Production d'Ions Radioactifs Acceleres en Ligne) which will start at GANIL at the end of 1998. The aim of the thesis was to study the on line radioactive multicharged ion beam production stages, i.e. the production and diffusion of the radioactive nuclei in a thick target, their possible transfer up to an ECR ion source and their ionisation. Production cross sections of radioactive neutron rich nuclei, formed by fragmentation of a heavy ion beam in a thick target, were measured. An external target-ECR source system, dedicated to the radioactive noble gases production, and two internal target-ECR source systems, dedicated to the radioactive condensable element production, were built and tested on the SIRa tests bench (Separateur d'Ions Radioactifs). Different detection configurations were elaborated in order to identify the radioactive nuclei and estimate their production yields. Finally, a new method for measuring the overall efficiency of the separator was developed and allowed to study the diffusion properties of radioactive noble gases in various targets. (author)

Off-line real-time FTIR analysis of a process step in imipenem production

Science.gov (United States)

Boaz, Jhansi R.; Thomas, Scott M.; Meyerhoffer, Steven M.; Staskiewicz, Steven J.; Lynch, Joseph E.; Egan, Richard S.; Ellison, Dean K.

1992-08-01

We have developed an FT-IR method, using a Spectra-Tech Monit-IR 400 systems, to monitor off-line the completion of a reaction in real-time. The reaction is moisture-sensitive and analysis by more conventional methods (normal-phase HPLC) is difficult to reproduce. The FT-IR method is based on the shift of a diazo band when a conjugated beta-diketone is transformed into a silyl enol ether during the reaction. The reaction mixture is examined directly by IR and does not require sample workup. Data acquisition time is less than one minute. The method has been validated for specificity, precision and accuracy. The results obtained by the FT-IR method for known mixtures and in-process samples compare favorably with those from a normal-phase HPLC method.

AN INVESTIGATION OF THE APPLICABILITY OF SOFTWARE PRODUCT LINE ENGINEERING FOR ENERGY AND COST-EFFICIENT GREENHOUSE PRODUCTION

DEFF Research Database (Denmark)

Mærsk-Møller, Hans Martin

product line architecture, and how the variability is managed and described using SPLE. It also describes how the DynaLight software product line and its products were developed. Doing so, it shows utilization of rich client platform technology in conjunction with SPLE, which has not been described....... Supplementary lighting is utilized to compensate for the light conditions in the darker months of the year in order to grow certain plants. This is both energy consuming and expensive, as the cost of electricity is high. New knowledge on the plasticity in plants to irregular light patterns is basis for a novel...... and cost, and two desktop tools, the first, DynaLight Desktop, a day-ahead-light-planning tool, and the second, DynaLight Desktop w/control, with the added capability to execute the plans by actuating the light inside the greenhouses. This work provides a SPLE methodology explicitly customized to our...

Marketing plan for Pharmacare product line in the Moscow region Case Oriola-KD

OpenAIRE

Mashkilleyson, Peter

2012-01-01

The thesis was commissioned by Oriola-KD. It deals with a marketing plan for a product line called Pharmacare. The product line will be launched in 2012 in the Moscow region in the Russian Federation. The purpose of this thesis was to acquire useful information about the Moscow market for the target company and produce a marketing plan that they can implement. The research question was how to create an effective marketing plan and what it entails. The literary review consisted of the theo...

Nuclearization of ionic chromatography system for fission products analysis

International Nuclear Information System (INIS)

Dimeglio, Remi

1996-06-01

The accident at Tchernobyl in 1986 had entailed the release in the atmosphere of different products coming from the splitting of the fuel. It is to better understand, and also to warn this type of catastrophe that the CEA (Commissariat a L'Energie Atomique) develops many programs of researches, aiming to characterize these fission products and to study their mechanisms of relaxation. Thus, the LESC (Laboratoire d'Etude de la Surete du Combustible) takes part, since several years, in many nuclear safety experiences, and in particular to the project PHEBUS PF, that is a reconstitution, in reduced scale, of an accident entailing the fusion of the reactor core. The aim of the researches that have been led during this training period was to the nuclearization of an HPIC (High Performance Ion Chromatography) system, dedicated to the analysis of the PHEBUS PF fission products analysis. The first step was to develop HPIC lines already settled, so as to reduce the quantity of wastes. Indeed, those one are very difficult to process in a radioactive area. For this purpose, we have implanted a column cationic more effective, so as to decrease analysis times, and, by there even, the quantity of sewage generated. We have equally replaced, on lines cationic and anionic, the system of suppression of the eluent conductivity, to make it thriftier in fluid. But the radioactive products characterization necessitates that all analyses are led within a special box with gloves. The second step of the project was therefore to adapt the system to this type of cell, and to its automation. It has been necessary to modify the system of sample injection, the system of detection, and to put in place a supplementary box with gloves, connected by sieve to the first, for the active products dilution. (author) [fr

On-line moisture analysis

CERN Document Server

Cutmore, N G

2002-01-01

Measurement of the moisture content of iron ore has become a key issue for controlling moisture additions for dust suppression. In most cases moisture content is still determined by manual or automatic sampling of the ore stream, followed by conventional laboratory analysis by oven drying. Although this procedure enables the moisture content to be routinely monitored, it is too slow for control purposes. This has generated renewed interest in on-line techniques for the accurate and rapid measurement of moisture in iron ore on conveyors. Microwave transmission techniques have emerged over the past 40 years as the dominant technology for on-line measurement of moisture in bulk materials, including iron ores. Alternative technologies have their limitations. Infra-red analysers are used in a variety of process industries, but rely on the measurement of absorption by moisture in a very thin surface layer. Consequently such probes may be compromised by particle size effects and biased presentation of the bulk mater...

78 FR 13016 - Certain Lined Paper Products From India: Notice of Partial Rescission of Countervailing Duty...

Science.gov (United States)

2013-02-26

... DEPARTMENT OF COMMERCE International Trade Administration [C-533-844] Certain Lined Paper Products... an administrative review of the countervailing duty order on certain lined paper products from India...\\ Petitioners are the Association of American School Paper Suppliers. \\4\\ See petitioners' November 27, 2012...

Simulation of Production Lines in the Education of Engineers: How to Choose the Right Software?

Directory of Open Access Journals (Sweden)

Rostkowska Marta

2014-12-01

Full Text Available The article discusses the problems of modeling and simulation in the design of production lines, mainly from an educator's perspective. Nowadays, there is a wide range of computer programs that can be used to design production lines and to simulate various aspects of their operation. However, the programs being available vary considerably as to their functionality, the approach to production system design, and the visualization tools. Therefore we demonstrate and evaluate in this paper four simulation programs, focusing on the easiness of system design, area of the possible applications in education of engineers, and the limitations imposed by versions dedicated for students. We evaluate three of programs for digital factory simulation on a common, simple assembly task, then demonstrate that these programs may be also used for more specialized simulations in various areas of production, and compare with a specialized program for simulation of robotised production lines and work cells.

Analysis of ensembles of moderately saturated interstellar lines

International Nuclear Information System (INIS)

Jenkins, E.B.

1986-01-01

It is shown that the combined equivalent widths for a large population of Gaussian-like interstellar line components, each with different central optical depths tau(0) and velocity dispersions b, exhibit a curve of growth (COG) which closely mimics that of a single, pure Gaussian distribution in velocity. Two parametric distributions functions for the line populations are considered: a bivariate Gaussian for tau(0) and b and a power law distribution for tau(0) combined with a Gaussian dispersion for b. First, COGs for populations having an extremely large number of nonoverlapping components are derived, and the implications are shown by focusing on the doublet-ratio analysis for a pair of lines whose f-values differ by a factor of two. The consequences of having, instead of an almost infinite number of lines, a relatively small collection of components added together for each member of a doublet are examined. The theory of how the equivalent widths grow for populations of overlapping Gaussian profiles is developed. Examples of the composite COG analysis applied to existing collections of high-resolution interstellar line data are presented. 39 references

Productivity, adaptability and stability of high-oleic peanut lines in the State of São Paulo

Directory of Open Access Journals (Sweden)

João Francisco dos Santos

2018-04-01

Full Text Available ABSTRACT Estimating stability and adaptability parameters of cultivars is a widely used study to access the genotype × environment interaction, in order to identify the best genotypes for each cultivation area. In this study, the adaptability and stability parameters were estimated in eight high-oleic lines and two peanut cultivars in 11 experiments in the State of São Paulo, Brazil, from 2008 to 2013, based on the data of the plots mean productivity (Kg·ha–1, with the objective of recommending the most productive genotypes in peanut producing regions in the State of São Paulo. The design used for these experiments was the randomized complete blocks, with four replications. Lines L. 599 and L. 551 were the best genotypes regarding overall adaptability and stability in yield, considering the methods of Eberhart and Russell and of Lin and Binns modified by Carneiro. Results produced by both methods were convergent as for the classification of the lines, and the use of one of them would not be detrimental to the recommendation of productive lines associated to production adaptability and stability. The overall adaptability in addition to the stability in the productivity of the lines here evaluated showed outstanding performance in relation to the cultivars IAC Caiapó and Runner IAC 886.

EC Transmission Line Risk Identification and Analysis

Energy Technology Data Exchange (ETDEWEB)

Bigelow, Tim S [ORNL

2012-04-01

The purpose of this document is to assist in evaluating and planning for the cost, schedule, and technical project risks associated with the delivery and operation of the EC (Electron cyclotron) transmission line system. In general, the major risks that are anticipated to be encountered during the project delivery phase associated with the implementation of the Procurement Arrangement for the EC transmission line system are associated with: (1) Undefined or changing requirements (e.g., functional or regulatory requirements) (2) Underperformance of prototype, first unit, or production components during testing (3) Unavailability of qualified vendors for critical components Technical risks associated with the design and operation of the system are also identified.

Conducting Qualitative Data Analysis: Reading Line-by-Line, but Analyzing by Meaningful Qualitative Units

Science.gov (United States)

Chenail, Ronald J.

2012-01-01

In the first of a series of "how-to" essays on conducting qualitative data analysis, Ron Chenail points out the challenges of determining units to analyze qualitatively when dealing with text. He acknowledges that although we may read a document word-by-word or line-by-line, we need to adjust our focus when processing the text for purposes of…

Analysis of noise lines in the Virgo C7 data

International Nuclear Information System (INIS)

Acernese, F; Amico, P; Alshourbagy, M

2007-01-01

The paper presents a description of the work of detection and identification of frequency lines in the Virgo dark fringe data from run C7. A number of methods are highlighted by which noise frequency lines are detected by data analysis and measurements in the laboratory. In this paper we give a description of the list of noise line candidates provided by the pulsar search analysis, the investigation of 10 Hz (and harmonics) noise, violin modes, noise from the end station buildings' air conditioners, sidebands in calibration lines and aliasing in the 4 kHz reconstructed data

Analysis of noise lines in the Virgo C7 data

Energy Technology Data Exchange (ETDEWEB)

Acernese, F [INFN, Sezione di Napoli and/or Universita di Napoli ' Federico II' Complesso Universitario di Monte S Angelo, and/or Universita di Salerno, Fisciano (Italy); Amico, P [INFN, Sezione di Perugia and/or Universita di Perugia, Perugia (Italy); Alshourbagy, M [INFN, Sezione di Pisa and/or Universita di Pisa, Pisa (Italy)] (and others)

2007-10-07

The paper presents a description of the work of detection and identification of frequency lines in the Virgo dark fringe data from run C7. A number of methods are highlighted by which noise frequency lines are detected by data analysis and measurements in the laboratory. In this paper we give a description of the list of noise line candidates provided by the pulsar search analysis, the investigation of 10 Hz (and harmonics) noise, violin modes, noise from the end station buildings' air conditioners, sidebands in calibration lines and aliasing in the 4 kHz reconstructed data.

Production layout improvement by using line balancing and Systematic Layout Planning (SLP) at PT. XYZ

Science.gov (United States)

Buchari; Tarigan, U.; Ambarita, M. B.

2018-02-01

PT. XYZ is a wood processing company which produce semi-finished wood with production system is make to order. In the production process, it can be seen that the production line is not balanced. The imbalance of the production line is caused by the difference in cycle time between work stations. In addition, there are other issues, namely the existence of material flow pattern is irregular so it resulted in the backtracking and displacement distance away. This study aimed to obtain the allocation of work elements to specific work stations and propose an improvement of the production layout based on the result of improvements in the line balancing. The method used in the balancing is Ranked Positional Weight (RPW) or also known as Helgeson Birnie method. While the methods used in the improvement of the layout is the method of Systematic Layout Planning (SLP). By using Ranked Positional Weight (RPW) obtained increase in line efficiency becomes 84,86% and decreased balance delay becomes 15,14%. Repairing the layout using the method of Systematic Layout Planning (SLP) also give good results with a reduction in path length becomes 133,82 meters from 213,09 meters previously or a decrease of 37.2%.

Production of prostate-specific antigen by a breast cancer cell line, Sk-Br-3

International Nuclear Information System (INIS)

Kamali Sarvestani, E.; Ghaderi, A.

2002-01-01

Prostate-specific antigen is a 33-KDa serine protease that is produced predominantly by prostate epithelium. However, it has been shown that about 30-40% of female breast tumors produce prostate-specific antigen and its production is associated with the presence of estrogen and progesterone receptors. We have now developed a new tissue culture system to study prostate-specific antigen production in breast cancer and its association with prognostic factors such as progesterone receptor and c-erbB-2. For this purpose we investigated the ability of prostate-specific antigen production in five different cell lines, including two breast cancer cell lines, Sk-Br-3 and MDA-MB-453. The prostate-specific antigen in tissue culture supernatant and cytoplasm of the Sk-Br-3 cell line was detected by western blotting and immunoperoxidase, respectively. Furthermore, we found lower expression of c-erbB-2 in Sk-Br-3 than non-prostate-specific antigen producer breast cancer cell line, MDA-MB-453. Progesterone receptor was expressed by both prostate-specific antigen-positive and -negative cell lines and only the intensity of staining and the number of positive cells in Sk-Br-3 population was higher than MDA-MB-453. According to our findings prostate-specific antigen can be considered as a good prognostic factor in breast cancer and we suggest that these two cell lines are a good in vitro model to study the relationship of different breast cancer prognostic factors and their regulations

Modeling of Throughput in Production Lines Using Response Surface Methodology and Artificial Neural Networks

Directory of Open Access Journals (Sweden)

Federico Nuñez-Piña

2018-01-01

Full Text Available The problem of assigning buffers in a production line to obtain an optimum production rate is a combinatorial problem of type NP-Hard and it is known as Buffer Allocation Problem. It is of great importance for designers of production systems due to the costs involved in terms of space requirements. In this work, the relationship among the number of buffer slots, the number of work stations, and the production rate is studied. Response surface methodology and artificial neural network were used to develop predictive models to find optimal throughput values. 360 production rate values for different number of buffer slots and workstations were used to obtain a fourth-order mathematical model and four hidden layers’ artificial neural network. Both models have a good performance in predicting the throughput, although the artificial neural network model shows a better fit (R=1.0000 against the response surface methodology (R=0.9996. Moreover, the artificial neural network produces better predictions for data not utilized in the models construction. Finally, this study can be used as a guide to forecast the maximum or near maximum throughput of production lines taking into account the buffer size and the number of machines in the line.

Genome-wide comparative transcriptome analysis of CMS-D2 and its maintainer and restorer lines in upland cotton.

Science.gov (United States)

Wu, Jianyong; Zhang, Meng; Zhang, Bingbing; Zhang, Xuexian; Guo, Liping; Qi, Tingxiang; Wang, Hailin; Zhang, Jinfa; Xing, Chaozhu

2017-06-08

Cytoplasmic male sterility (CMS) conferred by the cytoplasm from Gossypium harknessii (D2) is an important system for hybrid seed production in Upland cotton (G. hirsutum). The male sterility of CMS-D2 (i.e., A line) can be restored to fertility by a restorer (i.e., R line) carrying the restorer gene Rf1 transferred from the D2 nuclear genome. However, the molecular mechanisms of CMS-D2 and its restoration are poorly understood. In this study, a genome-wide comparative transcriptome analysis was performed to identify differentially expressed genes (DEGs) in flower buds among the isogenic fertile R line and sterile A line derived from a backcross population (BC 8 F 1 ) and the recurrent parent, i.e., the maintainer (B line). A total of 1464 DEGs were identified among the three isogenic lines, and the Rf1-carrying Chr_D05 and its homeologous Chr_A05 had more DEGs than other chromosomes. The results of GO and KEGG enrichment analysis showed differences in circadian rhythm between the fertile and sterile lines. Eleven DEGs were selected for validation using qRT-PCR, confirming the accuracy of the RNA-seq results. Through genome-wide comparative transcriptome analysis, the differential expression profiles of CMS-D2 and its maintainer and restorer lines in Upland cotton were identified. Our results provide an important foundation for further studies into the molecular mechanisms of the interactions between the restorer gene Rf1 and the CMS-D2 cytoplasm.

A regression-based Kansei engineering system based on form feature lines for product form design

Directory of Open Access Journals (Sweden)

Yan Xiong

2016-06-01

Full Text Available When developing new products, it is important for a designer to understand users’ perceptions and develop product form with the corresponding perceptions. In order to establish the mapping between users’ perceptions and product design features effectively, in this study, we presented a regression-based Kansei engineering system based on form feature lines for product form design. First according to the characteristics of design concept representation, product form features–product form feature lines were defined. Second, Kansei words were chosen to describe image perceptions toward product samples. Then, multiple linear regression and support vector regression were used to construct the models, respectively, that predicted users’ image perceptions. Using mobile phones as experimental samples, Kansei prediction models were established based on the front view form feature lines of the samples. From the experimental results, these two predict models were of good adaptability. But in contrast to multiple linear regression, the predict performance of support vector regression model was better, and support vector regression is more suitable for form regression prediction. The results of the case showed that the proposed method provided an effective means for designers to manipulate product features as a whole, and it can optimize Kansei model and improve practical values.

Optimal Scheduling of Material Handling Devices in a PCB Production Line: Problem Formulation and a Polynomial Algorithm

Directory of Open Access Journals (Sweden)

Ada Che

2008-01-01

Full Text Available Modern automated production lines usually use one or multiple computer-controlled robots or hoists for material handling between workstations. A typical application of such lines is an automated electroplating line for processing printed circuit boards (PCBs. In these systems, cyclic production policy is widely used due to large lot size and simplicity of implementation. This paper addresses cyclic scheduling of a multihoist electroplating line with constant processing times. The objective is to minimize the cycle time, or equivalently to maximize the production throughput, for a given number of hoists. We propose a mathematical model and a polynomial algorithm for this scheduling problem. Computational results on randomly generated instances are reported.

Advantages and Disadvantages of Possible Methods of Managing the Production on the Assembly Lines in the Given Company

OpenAIRE

Václavková, Eva

2014-01-01

The bachelor thesis deals with methods of lean management, more exactly production planning and managing the production lines assembly. In this thesis, production planning system, kanban cards and heijunka will be described. The aim of this thesis is to describe methods of managing the production lines assembly and to suggest more effective management.

Line outage contingency analysis including the system islanding ...

African Journals Online (AJOL)

The optimally ordered sparse [Bʹ], [Bʺ] matrices for the integrated system are used for load flow analysis to determine modified values of voltage phase angles [d] and bus voltages [V] to determine the over loading effect on the remaining lines due to outage of a selected line outage contingency. In case of over loading in ...

An Optimal Balancing of Multiple Assembly Line For a Batch Production Unit

Directory of Open Access Journals (Sweden)

M. Mohan Prasad

2013-12-01

Full Text Available Higher Productivity in organizations leads to national prosperity and better standard of living for the whole community. This has motivated several workers on productivity improvement at different levels of XXXX India Pvt Ltd, Chennai. The main objective of this project is to increase the production by changing the layout of the assembly line in making of Transmit Mixer. At present 12 machines are being manufactured in a total of 2 shifts per day. Time study is carried out to identify and avoid the idle time to increase the production rate to 24 machines per day. The organization facing the problems like production time, online inventory, delay and idle time. Here our objective is to reduce the idle time, identifying the cycle time and optimal method of production. The COMSOAL (Computer Method for Sequencing Operations for Assembly Lines and RPW (Ranked Positional Weight algorithms have been used to get the optimal solution. This algorithm provides the better solution, thereby reducing unnecessary movements of the worker within the station. The overall cycle time got reduced when compared with the existing cycle time in order to meet the customer demand. Thus we are proposing this scientific approach to get the optimal solution for increased rate of production of the company without affecting the quality and cost.

LEAFY TURNIP IS A NEW CROP FOR SALAD PRODUCTION LINES

OpenAIRE

V. A. Stepanov; S. M. Sirota; O. V. Antipova

2015-01-01

The collaborative work on growing of leafy turnip in condition of salad production line was conducted in ООО PKF «AGROTIP». The possibility of obtaining of ecologically safety salad turnip of cv. Selekta, Sapfir, and Biryuza at hydroponic system are shown. Data of yield, productivity, and content of ascorbic acid in green leaf of turnip growing in condition of flow hydroponic system are presented. The possibilities of using of tested turnip varieties in modern agrotechnological systems are di...

Study on Product Lines for Digital Information Products%数字信息产品生产线研究

Institute of Scientific and Technical Information of China (English)

毛凌翔; 程慧平

2014-01-01

在数字信息逐渐从“资源观”向“产品观”转换的背景下，从数字信息产品的角度分析数字信息产品生产过程与模型，提出基于人工构件变异和组件重用的数字信息产品生产线理论，并应用于地理信息产品中进行实证，有望提高数字信息产品的生产效率并节约生产成本。%With the development of digital information technology and market-driven economy, user needs become diversified and customized today, and digital information is increasingly turning toward product-perspective direction from the resource-perspective. From the perspective of digital information products, digital information production process and model has been analyzed, and a digital information product lines theory based on artifacts variation and component reuse has been proposed. Then using instance to prove the correctness of the theory, practical use of digital information production line mode can greatly improve production efficiency of digital information products and significantly save production costs.

Analysis of cement solidified product and ash samples and preparation of a reference material

International Nuclear Information System (INIS)

Ishimori, Ken-ichiro; Haraga, Tomoko; Shimada, Asako; Kameo, Yutaka; Takahashi, Kuniaki

2010-08-01

Simple and rapid analytical methods for radionuclides in low-level radioactive waste have been developed by the present authors. The methods were applied to simulated solidified products and actual metal wastes to confirm their usefulness. The results were summarized as analytical guide lines. In the present work, cement solidified product and ash waste were analyzed followed by the analytical guide lines and subjects were picked up and solved for the application of the analytical guide lines to these wastes. Pulverization and homogenization method for ash waste was improved to prevent a contamination since the radioactivity concentrations of the ash samples were relatively high. Pre-treatment method was altered for the cement solidified product and ash samples taking account for their high concentration of Ca. Newly, an analytical method was also developed to measure 129 I with a dynamic reaction cell inductively coupled plasma mass spectrometer. In the analytical test based on the improved guide lines, gamma-ray emitting nuclides, 60 Co and 137 Cs, were measured to estimate the radioactivity of the other alpha and beta-ray emitting nuclides. The radionuclides assumed detectable, 3 H, 14 C, 36 Cl, 63 Ni, 90 Sr, and alpha-ray emitting nuclides, were analyzed with the improved analytical guide lines and their applicability for cement solidified product and ash samples were confirmed. Additionally a cement solidified product sample was evaluated in terms of the homogeneity and the radioactivity concentrations in order to prepare a reference material for radiochemical analysis. (author)

78 FR 63162 - Certain Lined Paper Products From India: Notice of Partial Rescission and Preliminary Results of...

Science.gov (United States)

2013-10-23

... DEPARTMENT OF COMMERCE International Trade Administration [A-533-843] Certain Lined Paper Products... certain lined paper products (CLPP) from India.\\2\\ The period of review (POR) is September 1, 2011... Petitioners are the Association of American School Paper Suppliers (AASPS) and its individual members. \\2\\ See...

Productivity and Nutrient Quality of Some Sorghum Mutant Lines at Different Cutting Ages

Directory of Open Access Journals (Sweden)

R. E. Puteri

2015-08-01

Full Text Available The objective of the study was to explore the appropriate cutting age to produce optimal biomass and good nutrient quality from sorghum mutant lines BMR i.e., PATIR 3.5 M7, PATIR 3.6 M7, and PATIR 3.7 M7, also SAMURAI I (M17. A completely randomized in Split Plot design with 2 factors and 3 replicates was used. The first factor was the type of sorghum (SAMURAI I M17, PATIR 3.5, PATIR 3.6, PATIR 3.7 as the main plot and the second factor was the cutting age (85, 95, 105 as a subplot. Parameters observed were the production of stems, leaves, grains, total biomass production, ash, crude fat, crude fiber, crude protein, NFE, TDN, percentage of DMD, OMD and N-NH3. Data were analyzed by using ANOVA followed by DMRT (Duncan Multiple Range Test. The results showed that there were highly significant interactions (P<0.01 between cutting age and type of sorghum in production of stems, leaves, grains, total biomass production, value of TDN, DMD, OMD, and N-NH3. Increasing cutting age significantly increased the percentage of ash content, crude protein and crude fat. The sorghum type significantly affected crude fat content nonBMR sorghum variety of SAMURAI I (M17 and achieved optimal biomass production and nutrient content at cutting age of 85 d similar to BMR sorghum mutant lines PATIR 3.6 and PATIR 3.5, whereas BMR sorghum mutant lines of PATIR 3.7 achieved optimum production at the age of 95 d of cutting. All types of sorghum varieties was not recommended to be harvested at 105 d. Biomass production increased with the increasing of cutting age, but the nutrient content decreased.

Comparative analysis on flexibility requirements of typical Cryogenic Transfer lines

Science.gov (United States)

Jadon, Mohit; Kumar, Uday; Choukekar, Ketan; Shah, Nitin; Sarkar, Biswanath

2017-04-01

The cryogenic systems and their applications; primarily in large Fusion devices, utilize multiple cryogen transfer lines of various sizes and complexities to transfer cryogenic fluids from plant to the various user/ applications. These transfer lines are composed of various critical sections i.e. tee section, elbows, flexible components etc. The mechanical sustainability (under failure circumstances) of these transfer lines are primary requirement for safe operation of the system and applications. The transfer lines need to be designed for multiple design constraints conditions like line layout, support locations and space restrictions. The transfer lines are subjected to single load and multiple load combinations, such as operational loads, seismic loads, leak in insulation vacuum loads etc. [1]. The analytical calculations and flexibility analysis using professional software are performed for the typical transfer lines without any flexible component, the results were analysed for functional and mechanical load conditions. The failure modes were identified along the critical sections. The same transfer line was then refurbished with the flexible components and analysed for failure modes. The flexible components provide additional flexibility to the transfer line system and make it safe. The results obtained from the analytical calculations were compared with those obtained from the flexibility analysis software calculations. The optimization of the flexible component’s size and selection was performed and components were selected to meet the design requirements as per code.

Analysis of an in-line diesel production system through event driven simulation; Avaliacao do esquema de producao em linha de diesel atraves da simulacao por eventos discretos

Energy Technology Data Exchange (ETDEWEB)

Monteiro, Gilsa P.; Naegeli, Guilherme S.T. [PETROBRAS S.A., Rio de Janeiro, RJ (Brazil). Centro de Pesquisas (CENPES); Santos, Nilza M.Q. [PETROBRAS S.A., Mataripe, Salvador, BA (Brazil). Refinaria Landulfo Alves (RLAM); Netto, Joaquim D.A. [DNV Energy Solutions, Porto Alegre, RS (Brazil)

2008-07-01

The interactions between refining processes (such as distillation, hydrotreatment, etc.) and typical transfer and storage operations (mixtures, decantation, storage, etc.) provide a high complexity to the refineries production systems of petroleum derivatives. These production systems are characterized by many aspects, such as: blending rules, feed composition, petroleum campaigns, storage tanks limitations, continuous and batch processes interactions, etc. Besides these operational aspects, the equipment and systems' reliability has strong influence on the level of production goals achievement and petroleum derivatives quality specification. Looking for a higher economic efficiency and in order to provide refineries with orientation about resources optimization for their petroleum derivatives' production systems, the development of a methodology capable of being applied since the design phase to identify systems limitations and improvement opportunities, considering all the raised aspects, is a very important task. With this objective, this article presents the main points of an evaluation that was conducted during the conceptual design for a diesel in-line blending production system proposed by a Brazilian refinery, detailing the main steps of the methodology that was developed through this analysis, based on discrete event simulation. (author)

Trustworthy Variant Derivation with Translation Validation for Safety Critical Product Lines

DEFF Research Database (Denmark)

Iosif-Lazăr, Alexandru Florin; Wasowski, Andrzej

2016-01-01

Software product line (SPL) engineering facilitates development of entire families of software products with systematic reuse. Model driven SPLs use models in the design and development process. In the safety critical domain, validation of models and testing of code increases the quality...... of the products altogether. However, to maintain this trustworthiness it is necessary to know that the SPL tools, which manipulate models and code to derive concrete product variants, do not introduce errors in the process. We propose a general technique of checking correctness of product derivation tools through...... translation validation. We demonstrate it using Featherweight VML—a core language for separate variability modeling relying on a single kind of variation point to define transformations of artifacts seen as object models. We use Featherweight VML with its semantics as a correctness specification...

Optimization of XRFS for the analysis of toxic elements and heavy metals in coffee products

International Nuclear Information System (INIS)

Orlic, I.; Makjanic, J.; Valkovic, V.

1986-01-01

X-ray fluorescence spectroscopy can be successfully used for routine on-line analysis of different agricultural products, e.g. for food quality control. The optimization of the system for such purposes and the results obtained are shown on the example of the analysis of coffee. (author)

Software product lines using FODA: a formal approach

OpenAIRE

Camacho González , Carlos

2012-01-01

El término línea de producción en inglés product line evoca a menudo la imagen de una fábrica de coches con un conjunto de brazos mecánicos especializados en colocar piezas, o tareas específicas como atornillar, soldar o ensamblar para conseguir, como producto final, un coche de manera rápida, invirtiendo la menor cantidad de recursos posibles, entre ellos, tiempo y dinero. Esta metodología se ha aplicado en contextos totalmente diferentes a la fabricación de coches, como por ejemplo en el...

Analysis of emergency department waiting lines

Directory of Open Access Journals (Sweden)

Urška Močnik

2014-10-01

Full Text Available Background: Steady increase in the numbers of patients seeking medical assistance has recently been observed at the emergency department of the health center under study. This has led to increases in waiting times for patients. The management of the health center has been considering to implement certain measures to remedy this situation. One proposed solution is to add an additional physician to the emergency department. A computer model was constructed to simulate waiting lines and analyze the economic feasibility of employing an additional physician.Aim: This paper analyzes the waiting lines at the emergency department and performs an economic feasibility study to determine whether adding an additional physician to the department would be economically justified.Methods: Data about waiting times at the emergency department were collected to study the situation. For each patient, the arrival time at the waiting room and the starting and ending times of the examination were registered. The data were collected from 13 June 2011 to 25 September 2011. The sample included data on 65 nightly standbys, nine standbys on Saturdays, and 16 standbys on Sundays. Due to incomplete entries, data for nine weekly standbys and six Saturday standbys were excluded from the sample. Based on the data collected, we calculated the waiting and examination times per patient, average number of patients, average waiting time, average examination time, share of active standby teams in total standby time, and number of patients in different time periods. The study involved 1,039 patients. Using a synthesis method, we designed a computer model of waiting lines and economic feasibility. The model was validated using comparative analysis. A what-if analysis was performed using various computer simulations with various scenarios to consider the outcomes of decision alternatives. We applied economic analysis to select the best possible solution.Results: The research results

Top-Down and Bottom-Up Approach for Model-Based Testing of Product Lines

Directory of Open Access Journals (Sweden)

Stephan Weißleder

2013-03-01

Full Text Available Systems tend to become more and more complex. This has a direct impact on system engineering processes. Two of the most important phases in these processes are requirements engineering and quality assurance. Two significant complexity drivers located in these phases are the growing number of product variants that have to be integrated into the requirements engineering and the ever growing effort for manual test design. There are modeling techniques to deal with both complexity drivers like, e.g., feature modeling and model-based test design. Their combination, however, has been seldom the focus of investigation. In this paper, we present two approaches to combine feature modeling and model-based testing as an efficient quality assurance technique for product lines. We present the corresponding difficulties and approaches to overcome them. All explanations are supported by an example of an online shop product line.

Production of coagulation factor VII in human cell lines Sk-Hep-1 and HKB-11.

Science.gov (United States)

Corrêa de Freitas, Marcela Cristina; Bomfim, Aline de Sousa; Mizukami, Amanda; Picanço-Castro, Virgínia; Swiech, Kamilla; Covas, Dimas Tadeu

2017-09-01

Recombinant factor VII (rFVII) is the main therapeutic choice for hemophilia patients who have developed inhibitory antibodies against conventional treatments (FVIII and FIX). Because of the post-translational modifications, rFVII needs to be produced in mammalian cell lines. In this study, for the first time, we have shown efficient rFVII production in HepG2, Sk-Hep-1, and HKB-11 cell lines. Experiments in static conditions for a period of 96 h showed that HepG2-FVII produced the highest amounts of rhFVII, with an average of 1843 ng/mL. Sk-hep-1-FVII cells reached a maximum protein production of 1432 ng/mL and HKB-11-FVII cells reached 1468 ng/mL. Sk-Hep-1-rFVII and HKB-11-rFVII were selected for the first step of scale-up. Over 10 days of spinner flask culture, HKB-11 and SK-Hep-1 cells showed a cumulative production of rFVII of 152 μg and 202.6 μg in 50 mL, respectively. Thus, these human cell lines can be used for an efficient production of recombinant FVII. With more investment in basic research, human cell lines can be optimized for the commercial production of different bio therapeutic proteins. Copyright © 2017 Elsevier Inc. All rights reserved.

On-line data analysis and monitoring for H1 drift chambers

International Nuclear Information System (INIS)

Duellmann, D.

1992-01-01

The on-line monitoring, slow control and calibration of the H1 central jet chamber uses a VME multiprocessor system to perform the analysis and a connected Macintosh computer as graphical interface to the operator on shift. Tasks of this system are: Analysis of event data including on-line track search; on-line calibration from normal events and testpulse events; control of the high voltage and monitoring of settings and currents; monitoring of temperature, pressure and mixture of the chambergas. A program package is described which controls the dataflow between data aquisition, different VME CPUs and Macintosh. It allows to run off-line style programs for the different tasks. (orig.)

On-line data analysis and monitoring for H1 drift chambers

Science.gov (United States)

Düllmann, Dirk

1992-05-01

The on-line monitoring, slow control and calibration of the H1 central jet chamber uses a VME multiprocessor system to perform the analysis and a connected Macintosh computer as graphical interface to the operator on shift. Task of this system are: - analysis of event data including on-line track search, - on-line calibration from normal events and testpulse events, - control of the high voltage and monitoring of settings and currents, - monitoring of temperature, pressure and mixture of the chambergas. A program package is described which controls the dataflow between data aquisition, differnt VME CPUs and Macintosh. It allows to run off-line style programs for the different tasks.

Performance characteristics of a novel blood bag in-line closure device and subsequent product quality assessment

Science.gov (United States)

Serrano, Katherine; Levin, Elena; Culibrk, Brankica; Weiss, Sandra; Scammell, Ken; Boecker, Wolfgang F; Devine, Dana V

2010-01-01

BACKGROUND In high-volume processing environments, manual breakage of in-line closures can result in repetitive strain injury (RSI). Furthermore, these closures may be incorrectly opened causing shear-induced hemolysis. To overcome the variability of in-line closure use and minimize RSI, Fresenius Kabi developed a new in-line closure, the CompoFlow, with mechanical openers. STUDY DESIGN AND METHODS The consistency of the performance of the CompoFlow closure device was assessed, as was its effect on component quality. A total of 188 RBC units using CompoFlow blood bag systems and 43 using the standard bag systems were produced using the buffy coat manufacturing method. Twenty-six CompoFlow platelet (PLT) concentrates and 10 control concentrates were prepared from pools of four buffy coats. RBCs were assessed on Days 1, 21, and 42 for cellular variables and hemolysis. PLTs were assessed on Days 1, 3, and 7 for morphology, CD62P expression, glucose, lactate, and pH. A total of 308 closures were excised after processing and the apertures were measured using digital image analysis. RESULTS The use of the CompoFlow device significantly improved the mean extraction time with 0.46 ± 0.11 sec/mL for the CompoFlow units and 0.52 ± 0.13 sec/mL for the control units. The CompoFlow closures showed a highly reproducible aperture after opening (coefficient of variation, 15%) and the device always remained opened. PLT and RBC products showed acceptable storage variables with no differences between CompoFlow and control. CONCLUSIONS The CompoFlow closure devices improved the level of process control and processing time of blood component production with no negative effects on product quality. PMID:20529007

Grounding Lines Detecting Using LANDSAT8 Oli and CRYOSAT-2 Data Fusion

Science.gov (United States)

Li, F.; Guo, Y.; Zhang, Y.; Zhang, S.

2018-04-01

The grounding zone is the region where ice transitions from grounded ice sheet to freely floating ice shelf, grounding lines are actually more of a zone, typically over several kilometers. The mass loss from Antarctica is strongly linked to changes in the ice shelves and their grounding lines, since the variation in the grounding line can result in very rapid changes in glacier and ice-shelf behavior. Based on remote sensing observations, five global Antarctic grounding line products have been released internationally, including MOA, ASAID, ICESat, MEaSUREs, and Synthesized grounding lines. However, the five products could not provide the annual grounding line products of the whole Antarctic, even some products have stopped updating, which limits the time series analysis of Antarctic material balance to a certain extent. Besides, the accurate of single remote-sensing data based grounding line products is far from satisficed. Therefore, we use algorithms to extract grounding lines with SAR and Cryosat-2 data respectively, and combine the results of two kinds of grounding lines to obtain new products, we obtain a mature grounding line extraction algorithm process, so that we can realize the extraction of grounding line of the Antarctic each year in the future. The comparison between fusion results and the MOA product results indicate that there is a maximum deviation of 188.67 meters between the MOA product and the fusion result.

40 CFR 1048.320 - What happens if one of my production-line engines fails to meet emission standards?

Science.gov (United States)

2010-07-01

...-line engines fails to meet emission standards? 1048.320 Section 1048.320 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM NEW, LARGE NONROAD SPARK-IGNITION ENGINES Testing Production-line Engines § 1048.320 What happens if one of my production...

Micro-Injection Moulding In-Line Quality Assurance Based on Product and Process Fingerprints

DEFF Research Database (Denmark)

Baruffi, Federico; Calaon, Matteo; Tosello, Guido

2018-01-01

significant dimensional features of the micro part were measured using a focus variation microscope. Their dependency on the variation of µIM process parameters was studied with a Design of Experiments (DoE) statistical approach. A correlation study allowed the identification of the product fingerprint, i...... of the study showed that the dimensional quality of the micro component could be effectively controlled in-line by combining the two fingerprints, thus opening the door for future µIM in-line process optimization and quality assessment.......Micro-injection moulding (μIM) is a replication-based process enabling the cost-effective production of complex and net-shaped miniaturized plastic components. The micro-scaled size of such parts poses great challenges in assessing their dimensional quality and often leads to time...

Seismic Response Analysis of Concrete Lining Structure in Large Underground Powerhouse

Directory of Open Access Journals (Sweden)

Xiaowei Wang

2017-01-01

Full Text Available Based on the dynamic damage constitutive model of concrete material and seismic rock-lining structure interaction analysis method, the seismic response of lining structure in large underground powerhouse is studied in this paper. In order to describe strain rate dependence and fatigue damage of concrete material under cyclic loading, a dynamic constitutive model for concrete lining considering tension and shear anisotropic damage is presented, and the evolution equations of damage variables are derived. The proposed model is of simple form and can be programmed into finite element procedure easily. In order to describe seismic interaction characteristics of the surrounding rock and lining, an explicit dynamic contact analysis method considering bond and damage characteristics of contact face between the surrounding rock and lining is proposed, and this method can integrate directly without iteration. The proposed method is applied to seismic stability calculation of Yingxiuwan Underground Powerhouse, results reveal that the amplitude and duration of input seismic wave determine the damage degree of lining structure, the damage zone of lining structure is mainly distributed in its arch, and the contact face damage has great influence on the stability of the lining structure.

Measuring service line competitive position. A systematic methodology for hospitals.

Science.gov (United States)

Studnicki, J

1991-01-01

To mount a broad effort aimed at improving their competitive position for some service or group of services, hospitals have begun to pursue product line management techniques. A few hospitals have even reorganized completely under the product line framework. The benefits include focusing accountability for operations and results, facilitating coordination between departments and functions, stimulating market segmentation, and promoting rigorous examination of new and existing programs. As part of its strategic planning process, a suburban Baltimore hospital developed a product line management methodology with six basic steps: (1) define the service lines (which they did by grouping all existing diagnosis-related groups into 35 service lines), (2) determine the contribution of each service line to total inpatient volume, (3) determine trends in service line volumes (by comparing data over time), (4) derive a useful comparison group (competing hospitals or groups of hospitals with comparable size, scope of services, payer mix, and financial status), (5) review multiple time frames, and (6) summarize the long- and short-term performance of the hospital's service lines to focus further analysis. This type of systematic and disciplined analysis can become part of a permanent strategic intelligence program. When hospitals have such a program in place, their market research, planning, budgeting, and operations will be tied together in a true management decision support system.

Effective selection criteria for screening drought tolerant recombinant inbred lines of sunflower

Directory of Open Access Journals (Sweden)

Abdi Nishtman

2013-01-01

Full Text Available In this study, seventy two sunflower recombinant inbred lines were tested for their yielding ability under both water-stressed and well-watered states. The inbred lines were evaluated in a rectangular 8´9 lattice design with two replications in both well-watered and water-stressed conditions, separately. Eight drought tolerance indices including stability tolerance index (STI, mean productivity (MP, geometric mean productivity (GMP, harmonic mean (HM, stress susceptibility index (SSI, tolerance index (TOL, yield index (YI and yield stability index (YSI were calculated based on grain yield for every genotype. Results showed the highest values of mean productivity (MP index, geometric mean productivity (GMP, yield index (YI, harmonic mean (HM and stress tolerance index (STI indices for ‘C134a’ inbred line and least values of stress susceptibility index (SSI and tolerance (TOL for C61 inbred line. According to correlation of indices with yield performance under both drought stress and non-stress states and principle component analysis, indices including HM, MP, GMP and STI could properly distinguish drought tolerant sunflower inbred lines with high yield performance under both states. Cluster analysis of inbred lines using Ys, Yp and eight indices, categorized them into four groups including 19, 6, 26 and 19 inbred lines.

Gas exchange, heat production and oxidation of fat in chicken embryos from a fast or slow growing line

DEFF Research Database (Denmark)

Chwalibog, André; Tauson, Anne-Helene; Ali, Abdalla

2007-01-01

The experiment comprised 48 chicken (Gallus gallus) embryos from a modern, fast growing line, Ross 308 (RO) and 48 from a slow growing line, Labresse (LA). The O(2) consumption and CO(2) production were measured in an open-air-circuit respiration unit, and heat production (HE) from embryos was ca...

Experimental and in silico modelling analyses of the gene expression pathway for recombinant antibody and by-product production in NS0 cell lines.

Science.gov (United States)

Mead, Emma J; Chiverton, Lesley M; Spurgeon, Sarah K; Martin, Elaine B; Montague, Gary A; Smales, C Mark; von der Haar, Tobias

2012-01-01

Monoclonal antibodies are commercially important, high value biotherapeutic drugs used in the treatment of a variety of diseases. These complex molecules consist of two heavy chain and two light chain polypeptides covalently linked by disulphide bonds. They are usually expressed as recombinant proteins from cultured mammalian cells, which are capable of correctly modifying, folding and assembling the polypeptide chains into the native quaternary structure. Such recombinant cell lines often vary in the amounts of product produced and in the heterogeneity of the secreted products. The biological mechanisms of this variation are not fully defined. Here we have utilised experimental and modelling strategies to characterise and define the biology underpinning product heterogeneity in cell lines exhibiting varying antibody expression levels, and then experimentally validated these models. In undertaking these studies we applied and validated biochemical (rate-constant based) and engineering (nonlinear) models of antibody expression to experimental data from four NS0 cell lines with different IgG4 secretion rates. The models predict that export of the full antibody and its fragments are intrinsically linked, and cannot therefore be manipulated individually at the level of the secretory machinery. Instead, the models highlight strategies for the manipulation at the precursor species level to increase recombinant protein yields in both high and low producing cell lines. The models also highlight cell line specific limitations in the antibody expression pathway.

Guidelines for Using OAR Concepts in a DoD Product Line Acquisition Context

National Research Council Canada - National Science Library

Bergey, John

2000-01-01

Many DoD organizations are considering product line initiatives as a means of overcoming the issues of quality, cost and schedule inherent in a "one-at-a-time" system development or acquisition paradigm...

State of technology, system and solution supporting on-line maintenance - company's activities and products

International Nuclear Information System (INIS)

Nishitani, Junichi; Shimizu, Shunichi; Higasa, Hisakazu

2010-01-01

The new inspection system based on operator's maintenance and monitoring program of nuclear power plants was introduced in Japan more than one year ago and recommended on-line maintenance (maintenance during operation) will be carried out to increase capacity factor with safe and reliable operation of the plant. In this feature article, nine experts described the state of technology, system and solution supporting on-line maintenance - company's activities and products. These were titled as 'MHI's technology supporting on-line maintenance'. 'Technology supporting on-line maintenance - Toshiba's activities to upgrade monitoring and diagnostic service and maintenance management', 'AsahiKASEI's activities of on-line maintenance', 'Importance of information sharing of on-line maintenance and its ideal method-function of impact plan of IBM Maximo Asset Management for Nuclear', 'US's on-line maintenance and information systems', 'SmartProcedures realizing safe operation of nuclear power plant - proposal of computerized procedures', 'Ultrasonic leak detection system SDT170', 'Application of infrared thermography for equipment maintenance in nuclear power plant' and 'On-line condition monitoring system - condition eye'. (T. Tanaka)

Increasing Student Interest and Comprehension of Production Planning and Control and Operations Performance Measurement Concepts Using a Production Line Game

Science.gov (United States)

Cox, James F., III; Walker, Edward D., II

2005-01-01

Production planning and control (PPC) systems and operations performance measures are topics that students generally find both boring and difficult to understand. In the article, the authors present a production line game that they have found to be an effective tool to increase student interest in the topics as well as student comprehension. The…

Bottom-Up Technologies for Reuse: Automated Extractive Adoption of Software Product Lines

OpenAIRE

Martinez , Jabier ,; Ziadi , Tewfik; Bissyandé , Tegawendé; Klein , Jacques ,; Le Traon , Yves ,

2017-01-01

International audience; Adopting Software Product Line (SPL) engineering principles demands a high up-front investment. Bottom-Up Technologies for Reuse (BUT4Reuse) is a generic and extensible tool aimed to leverage existing similar software products in order to help in extractive SPL adoption. The envisioned users are 1) SPL adopters and 2) Integrators of techniques and algorithms to provide automation in SPL adoption activities. We present the methodology it implies for both types of users ...

Effects of irradiation on cytokine production in glioma cell lines

Energy Technology Data Exchange (ETDEWEB)

Yamanaka, Ryuya; Tanaka, Ryuichi; Yoshida, Seiichi [Niigata Univ. (Japan). Brain Research Inst.

1993-11-01

The effects of irradiation on cytokine production in glioma cell lines, NP1, NP2 and NP3, were studied. Culture supernatants were collected after 6, 24, 48 or 72 hours and the concentrations of interleukin (IL)-6 and IL-8 measured by enzyme-linked immunosorbent assay. Spontaneous and IL-1[beta]-stimulated productions were analyzed. Some cells were given a single dose of Lineac irradiation (10 or 20 Gy). Production of IL-6 (with or without IL-1[beta] stimulation) increased gradually to a maximum after 72 hours, more in the 20 Gy-irradiated cells than 10 Gy cells (p<0.01). Production of IL-8 increased gradually to a maximum after 48 or 72 hours. Spontaneous production of IL-8 increased more in 20 Gy-irradiated cells than 10 Gy cells after 6 and 24 hours (p<0.01), but increased more in 10 Gy cells than 20 Gy cells after 48 and 72 hours (p<0.01). The production of IL-8 stimulated by IL-1[beta] increased more in 10 Gy cells than 20 Gy cells 24 hours later (p<0.01). IL-6 and IL-8 production differed in the response to irradiation. Our data suggest that bidirectional communication between the immune system and glioma cells changes after radiotherapy. (author).

Endogenous pyrogen production by Hodgkin's disease and human histiocytic lymphoma cell lines in vitro.

Science.gov (United States)

Bodel, P; Ralph, P; Wenc, K; Long, J C

1980-02-01

Fever not explained by infection may occur in patients with malignant lymphoma presumably caused by a release of endogenous pyrogen. Although pyrogen has been found in some tumors with a mixed cell population, production of endogenous pyrogen by the neoplastic cells has not been demonstrated. This report documents the apparently spontaneous synthesis and release of such pyrogen by two human tumor cell lines derived from patients with Hodgkin's disease and histiocytic lymphoma. The endogenous pyrogen from the two cell lines was similar and closely resembled that produced by normal human monocytes in antigenic properties as well as heat and pronase sensitivity. The Hodgkin's disease and histiocytic lymphoma cell lines do not require specific stimulation for the production of endogenous pyrogen suggesting that the mechanism of pyrogen release by neoplastic macrophage-related cells differs from that of normal phagocytic cells. The tumor-associated fever in some patients with malignant lymphoma may be caused by a release of endogenous pyrogen by proliferating neoplastic cells.

Comprehensive Analysis of the Gas- and Particle-Phase Products of VOC Oxidation

Science.gov (United States)

Bakker-Arkema, J.; Ziemann, P. J.

2017-12-01

Controlled environmental chamber studies are important for determining atmospheric reaction mechanisms and gas and aerosol products formed in the oxidation of volatile organic compounds (VOCs). Such information is necessary for developing detailed chemical models for use in predicting the atmospheric fate of VOCs and also secondary organic aerosol (SOA) formation. However, complete characterization of atmospheric oxidation reactions, including gas- and particle-phase product yields, and reaction branching ratios, are difficult to achieve. In this work, we investigated the reactions of terminal and internal alkenes with OH radicals in the presence of NOx in an attempt to fully characterize the chemistry of these systems while minimizing and accounting for the inherent uncertainties associated with environmental chamber experiments. Gas-phase products (aldehydes formed by alkoxy radical decomposition) and particle-phase products (alkyl nitrates, β-hydroxynitrates, dihydroxynitrates, 1,4-hydroxynitrates, 1,4-hydroxycarbonyls, and dihydroxycarbonyls) formed through pathways involving addition of OH to the C=C double bond as well as H-atom abstraction were identified and quantified using a suite of analytical techniques. Particle-phase products were analyzed in real time with a thermal desorption particle beam mass spectrometer; and off-line by collection onto filters, extraction, and subsequent analysis of functional groups by derivatization-spectrophotometric methods developed in our lab. Derivatized products were also separated by liquid chromatography for molecular quantitation by UV absorbance and identification using chemical ionization-ion trap mass spectrometry. Gas phase aldehydes were analyzed off-line by collection onto Tenax and a 5-channel denuder with subsequent analysis by gas chromatography, or by collection onto DNPH-coated cartridges and subsequent analysis by liquid chromatography. The full product identification and quantitation, with careful

Comparative analysis of mitochondrial genomes between the hau cytoplasmic male sterility (CMS) line and its iso-nuclear maintainer line in Brassica juncea to reveal the origin of the CMS-associated gene orf288.

Science.gov (United States)

Heng, Shuangping; Wei, Chao; Jing, Bing; Wan, Zhengjie; Wen, Jing; Yi, Bin; Ma, Chaozhi; Tu, Jinxing; Fu, Tingdong; Shen, Jinxiong

2014-04-30

Cytoplasmic male sterility (CMS) is not only important for exploiting heterosis in crop plants, but also as a model for investigating nuclear-cytoplasmic interaction. CMS may be caused by mutations, rearrangement or recombination in the mitochondrial genome. Understanding the mitochondrial genome is often the first and key step in unraveling the molecular and genetic basis of CMS in plants. Comparative analysis of the mitochondrial genome of the hau CMS line and its maintainer line in B. juneca (Brassica juncea) may help show the origin of the CMS-associated gene orf288. Through next-generation sequencing, the B. juncea hau CMS mitochondrial genome was assembled into a single, circular-mapping molecule that is 247,903 bp in size and 45.08% in GC content. In addition to the CMS associated gene orf288, the genome contains 35 protein-encoding genes, 3 rRNAs, 25 tRNA genes and 29 ORFs of unknown function. The mitochondrial genome sizes of the maintainer line and another normal type line "J163-4" are both 219,863 bp and with GC content at 45.23%. The maintainer line has 36 genes with protein products, 3 rRNAs, 22 tRNA genes and 31 unidentified ORFs. Comparative analysis the mitochondrial genomes of the hau CMS line and its maintainer line allowed us to develop specific markers to separate the two lines at the seedling stage. We also confirmed that different mitotypes coexist substoichiometrically in hau CMS lines and its maintainer lines in B. juncea. The number of repeats larger than 100 bp in the hau CMS line (16 repeats) are nearly twice of those found in the maintainer line (9 repeats). Phylogenetic analysis of the CMS-associated gene orf288 and four other homologous sequences in Brassicaceae show that orf288 was clearly different from orf263 in Brassica tournefortii despite of strong similarity. The hau CMS mitochondrial genome was highly rearranged when compared with its iso-nuclear maintainer line mitochondrial genome. This study may be useful for studying the

On the analysis of the thermal line shift and thermal line width of ions in solids

Energy Technology Data Exchange (ETDEWEB)

Walsh, Brian M., E-mail: brian.m.walsh@nasa.gov [NASA Langley Research Center, Hampton, VA 23681 (United States); Di Bartolo, Baldassare, E-mail: baldassare.dibartolo@bc.edu [Boston College, Department of Physics, Chestnut Hill, MA 23667 (United States)

2015-02-15

A method of analysis for the thermally induced line shift and line width of spectral lines regarding the Raman process of ions in solids utilizing rational approximations for the Debye functions is presented. The {sup 2}E level unsplit R-line in V{sup 2+}:MgO is used as an example to illustrate the utility of the methods discussed here in providing a new analytical tool for researchers. - Highlights: • We use rational approximations for Debye functions. • We discuss limits and ranges of applicability of the rational approximations. • We formulate expressions for thermal shift and thermal linewidth for Raman processes using the rational approximations of the Debye functions. • We present an application of the methods to analyze the temperature dependent linewidth and lineshift in V2+:MgO.

NonLTE ANALYSIS OF THE NaI LINES IN THE SOLAR SPECTRUM

OpenAIRE

Ivanova, D. V.; Shimansky, V. V.

2017-01-01

Solar spectrum of Nal lines by method of the nonLTE analysis is investigated. It shown, that in atmosphere of the Sun the Nal is in moderate ”overrecombination”. The analysis of influence of atomic data, models of atmospheres and damping constants for nonLTE deviation and sodium abundances is made. Observational solar spectrum of strong lines Nal has been synthesized in good approximation. On summary data of 15 lines the sodium abundance is determined:-5.78dex.

76 FR 62343 - Certain Lined Paper Products From India: Notice of Preliminary Results of Antidumping Duty...

Science.gov (United States)

2011-10-07

... Lined Paper Products from India: Selection of Respondents for Individual Review'' (Respondent Selection... purposes of determining appropriate product comparisons to U.S. sales. Because Riddhi did not have home market sales of subject merchandise during the POR, all products produced by Riddhi covered by the...

Underground openings production line 2012. Design, production and initial state of the underground openings

International Nuclear Information System (INIS)

2013-08-01

The Underground Openings Line Production Line report describes the design requirements, the design principles, the methods of construction and the target properties for the underground rooms required for the final repository. It is one of five Production Line reports, namely the: Underground Openings Line report, Canister report, Buffer report, Backfill report, Closure report. Together, these reports cover the lifespan of the underground phases of the final repository from the start of construction of the underground rooms to their closure. Posiva has developed reference methods for constructing the underground rooms. Tunnels will be constructed using the drill and blast technique, shafts will be constructed using raise boring and the deposition holes will be constructed by reverse down reaming. Underground openings will be made safe by reinforcement by using rock bolts, net or shotcrete, depending on which type of opening is being considered, and groundwater inflows will be limited by grouting. Posiva's requirements management system (VAHA) sets out the specifications for the enactment of the disposal concept at Olkiluoto under five Levels - 1 to 5, from the most generic to the most specific. In this report, the focus is on Level 4 and 5 requirements, which provide practical guidance for the construction of the underground openings. The design requirements are presented in Level 4 and the design specification in Level 5 In addition to the long-term safety-related requirements included in VAHA, there are additional requirements regarding the operation of underground openings, e.g. space requirements due to the equipment used and its maintenance, operational and fire safety. The current reference design for the disposal facility is presented based on the design requirements and design specifications. During the lifespan of the repository the reference design will be revised and updated according to the design principles as new information is available. Reference

Risk Analysis Method Based on FMEA for Transmission Line in Lightning Hazards

Directory of Open Access Journals (Sweden)

You-Yuan WANG

2014-05-01

Full Text Available Failure rate of transmission line and reliability of power system are significantly affected by Lightning meteorological factor. In view of the complexity and variability of Lightning meteorological factors, this paper presents lightning trip-out rate model of transmission line in considering distribution of ground flash density and lightning day hours. Meanwhile, presents a failure rate model of transmission line in different condition, and a risk analysis method for transmission line considering multiple risk factors based on risk quantification. This method takes Lightning meteorological factor as the main evaluation standard, and establishes risk degree evaluation system for transmission line including another five evaluation standard. Put forward the risk indicators by quantify the risk factors based on experience date of transmission line in service. Based on the risk indexes comprehensive evaluation is conducted, and the evaluation result closer to practice is achieved, providing basis for transmission line risk warning and maintenance strategy. Through the risk analysis for 220 kV transmission line in a certain power supply bureau, the effectiveness of the proposed method is validated.

Prospects for higher spatial resolution quantitative X-ray analysis using transition element L-lines

Science.gov (United States)

Statham, P.; Holland, J.

2014-03-01

Lowering electron beam kV reduces electron scattering and improves spatial resolution of X-ray analysis. However, a previous round robin analysis of steels at 5 - 6 kV using Lα-lines for the first row transition elements gave poor accuracies. Our experiments on SS63 steel using Lα-lines show similar biases in Cr and Ni that cannot be corrected with changes to self-absorption coefficients or carbon coating. The inaccuracy may be caused by different probabilities for emission and anomalous self-absorption for the La-line between specimen and pure element standard. Analysis using Ll(L3-M1)-lines gives more accurate results for SS63 plausibly because the M1-shell is not so vulnerable to the atomic environment as the unfilled M4,5-shell. However, Ll-intensities are very weak and WDS analysis may be impractical for some applications. EDS with large area SDD offers orders of magnitude faster analysis and achieves similar results to WDS analysis with Lα-lines but poorer energy resolution precludes the use of Ll-lines in most situations. EDS analysis of K-lines at low overvoltage is an alternative strategy for improving spatial resolution that could give higher accuracy. The trade-off between low kV versus low overvoltage is explored in terms of sensitivity for element detection for different elements.

Material flow enhancement in production assembly lines under application of zoned order picking systems

Directory of Open Access Journals (Sweden)

D. Živanić

2014-10-01

Full Text Available Introduced research work relates to the possibility of material flow enhancement in production systems, with the apostrophe on material order picking in production assembly lines. The paper presents basic rules and the results related to formed computer models of zoned order picking systems under the application of developed bound cavities method.

Fluid-structure interaction analysis for pressurizer surge line subjected to thermal stratification

International Nuclear Information System (INIS)

Kang, Dong Gu; Jhung, Myung Jo; Chang, Soon Heung

2011-01-01

Research highlights: → Temperature of surge line due to stratified flow is defined using CFD analysis. → Fluid-structure interaction analysis is performed to investigate the response characteristics due to thermal stress. → Fatigue usage factors due to thermal stratification are relatively low. → Simplifying temperature distribution in surge line is not always conservative. - Abstract: Serious mechanical damages such as cracks and plastic deformations due to excessive thermal stress caused by thermal stratification have been experienced in several nuclear power plants. In particular, the thermal stratification in the pressurizer surge line has been addressed as one of the significant safety and technical issues. In this study, a detailed unsteady computational fluid dynamics (CFD) analysis involving conjugate heat transfer analysis is performed to obtain the transient temperature distributions in the wall of the pressurizer surge line subjected to stratified internal flows either during out-surge or in-surge operation. The thermal loads from CFD calculations are transferred to the structural analysis code which is employed for the thermal stress analysis to investigate the response characteristics, and the fatigue analysis is ultimately performed. In addition, the thermal stress and fatigue analysis results obtained by applying the realistic temperature distributions from CFD calculations are compared with those by assuming the simplified temperature distributions to identify some requirements for a realistic and conservative thermal stress analysis from a safety point of view.

Analysis of acetal toilet fill valve supply line nut failure

Directory of Open Access Journals (Sweden)

Anthony Timpanaro

2017-10-01

Full Text Available In recent years, there has been a rise in the number of product liability cases involving the failure of toilet water supply line acetal plastic nuts. These nuts can fail in service, causing water leaks that result in significant property and financial losses. This study examines three possible failure modes of acetal plastic toilet water supply nuts. The three failure modes tested were all due to over load failure of the acetal nut and are as follows: (1 Overtightening of the supply line acetal nut, (2 Supply line lateral pull and, (3 Embrittled supply line lateral pull. Additionally, a “hand-tight” torque survey was conducted. The fracture surfaces and characteristics of these failure tests were examined with Stereo Microscopy and Scanning Electron Microscopy (SEM. The failure modes were compared and contrasted to provide guidance in determination of cause in these investigations.

Gas chromatography-mass spectrometric analysis of products from on-line pyrolysis/silylation of plant gums used as binding media

Science.gov (United States)

Chiantore, Oscar; Riedo, Chiara; Scalarone, Dominique

2009-07-01

Plant gums are complex polysaccharides used in the field of cultural heritage especially as binding media. Classification of polysaccharides may be achieved on the basis of monosaccharides composition after cleavage of glycosidic bond. Characterization of plant gums in works of art is complicated by the necessity of to use a method minimally invasive and requiring a small mount of sample. Pyrolisys is an useful method to obtain polysaccharides decomposition and generally pyrolysis products can be identified by the use of gas chromatography-mass spectrometry. This paper describes a method where two plant gums, arabic and tragacanth, were pyrolized in presence of silylating agents (HMDS e BSTFA alone and with TMCS as catalyst) using an on-line Py-GC/MS apparatus. Some characteristic trimethylsilyl derivatives of monosaccharides were identified on the basis of mass spectra. The presence of characteristic pyrolysis products of sugars allows to distinguish the two gums.

Visual Perception-Based Statistical Modeling of Complex Grain Image for Product Quality Monitoring and Supervision on Assembly Production Line.

Directory of Open Access Journals (Sweden)

Jinping Liu

Full Text Available Computer vision as a fast, low-cost, noncontact, and online monitoring technology has been an important tool to inspect product quality, particularly on a large-scale assembly production line. However, the current industrial vision system is far from satisfactory in the intelligent perception of complex grain images, comprising a large number of local homogeneous fragmentations or patches without distinct foreground and background. We attempt to solve this problem based on the statistical modeling of spatial structures of grain images. We present a physical explanation in advance to indicate that the spatial structures of the complex grain images are subject to a representative Weibull distribution according to the theory of sequential fragmentation, which is well known in the continued comminution of ore grinding. To delineate the spatial structure of the grain image, we present a method of multiscale and omnidirectional Gaussian derivative filtering. Then, a product quality classifier based on sparse multikernel-least squares support vector machine is proposed to solve the low-confidence classification problem of imbalanced data distribution. The proposed method is applied on the assembly line of a food-processing enterprise to classify (or identify automatically the production quality of rice. The experiments on the real application case, compared with the commonly used methods, illustrate the validity of our method.

Visual Perception-Based Statistical Modeling of Complex Grain Image for Product Quality Monitoring and Supervision on Assembly Production Line.

Science.gov (United States)

Liu, Jinping; Tang, Zhaohui; Zhang, Jin; Chen, Qing; Xu, Pengfei; Liu, Wenzhong

2016-01-01

Computer vision as a fast, low-cost, noncontact, and online monitoring technology has been an important tool to inspect product quality, particularly on a large-scale assembly production line. However, the current industrial vision system is far from satisfactory in the intelligent perception of complex grain images, comprising a large number of local homogeneous fragmentations or patches without distinct foreground and background. We attempt to solve this problem based on the statistical modeling of spatial structures of grain images. We present a physical explanation in advance to indicate that the spatial structures of the complex grain images are subject to a representative Weibull distribution according to the theory of sequential fragmentation, which is well known in the continued comminution of ore grinding. To delineate the spatial structure of the grain image, we present a method of multiscale and omnidirectional Gaussian derivative filtering. Then, a product quality classifier based on sparse multikernel-least squares support vector machine is proposed to solve the low-confidence classification problem of imbalanced data distribution. The proposed method is applied on the assembly line of a food-processing enterprise to classify (or identify) automatically the production quality of rice. The experiments on the real application case, compared with the commonly used methods, illustrate the validity of our method.

On the analysis of line profile variations: A statistical approach

International Nuclear Information System (INIS)

McCandliss, S.R.

1988-01-01

This study is concerned with the empirical characterization of the line profile variations (LPV), which occur in many of and Wolf-Rayet stars. The goal of the analysis is to gain insight into the physical mechanisms producing the variations. The analytic approach uses a statistical method to quantify the significance of the LPV and to identify those regions in the line profile which are undergoing statistically significant variations. Line positions and flux variations are then measured and subject to temporal and correlative analysis. Previous studies of LPV have for the most part been restricted to observations of a single line. Important information concerning the range and amplitude of the physical mechanisms involved can be obtained by simultaneously observing spectral features formed over a range of depths in the extended mass losing atmospheres of massive, luminous stars. Time series of a Wolf-Rayet and two of stars with nearly complete spectral coverage from 3940 angstrom to 6610 angstrom and with spectral resolution of R = 10,000 are analyzed here. These three stars exhibit a wide range of both spectral and temporal line profile variations. The HeII Pickering lines of HD 191765 show a monotonic increase in the peak rms variation amplitude with lines formed at progressively larger radii in the Wolf-Rayet star wind. Two times scales of variation have been identified in this star: a less than one day variation associated with small scale flickering in the peaks of the line profiles and a greater than one day variation associated with large scale asymmetric changes in the overall line profile shapes. However, no convincing period phenomena are evident at those periods which are well sampled in this time series

Airborne electromagnetic data levelling using principal component analysis based on flight line difference

Science.gov (United States)

Zhang, Qiong; Peng, Cong; Lu, Yiming; Wang, Hao; Zhu, Kaiguang

2018-04-01

A novel technique is developed to level airborne geophysical data using principal component analysis based on flight line difference. In the paper, flight line difference is introduced to enhance the features of levelling error for airborne electromagnetic (AEM) data and improve the correlation between pseudo tie lines. Thus we conduct levelling to the flight line difference data instead of to the original AEM data directly. Pseudo tie lines are selected distributively cross profile direction, avoiding the anomalous regions. Since the levelling errors of selective pseudo tie lines show high correlations, principal component analysis is applied to extract the local levelling errors by low-order principal components reconstruction. Furthermore, we can obtain the levelling errors of original AEM data through inverse difference after spatial interpolation. This levelling method does not need to fly tie lines and design the levelling fitting function. The effectiveness of this method is demonstrated by the levelling results of survey data, comparing with the results from tie-line levelling and flight-line correlation levelling.

A novel RNA sequencing data analysis method for cell line authentication.

Directory of Open Access Journals (Sweden)

Erik Fasterius

Full Text Available We have developed a novel analysis method that can interrogate the authenticity of biological samples used for generation of transcriptome profiles in public data repositories. The method uses RNA sequencing information to reveal mutations in expressed transcripts and subsequently confirms the identity of analysed cells by comparison with publicly available cell-specific mutational profiles. Cell lines constitute key model systems widely used within cancer research, but their identity needs to be confirmed in order to minimise the influence of cell contaminations and genetic drift on the analysis. Using both public and novel data, we demonstrate the use of RNA-sequencing data analysis for cell line authentication by examining the validity of COLO205, DLD1, HCT15, HCT116, HKE3, HT29 and RKO colorectal cancer cell lines. We successfully authenticate the studied cell lines and validate previous reports indicating that DLD1 and HCT15 are synonymous. We also show that the analysed HKE3 cells harbour an unexpected KRAS-G13D mutation and confirm that this cell line is a genuine KRAS dosage mutant, rather than a true isogenic derivative of HCT116 expressing only the wild type KRAS. This authentication method could be used to revisit the numerous cell line based RNA sequencing experiments available in public data repositories, analyse new experiments where whole genome sequencing is not available, as well as facilitate comparisons of data from different experiments, platforms and laboratories.

Application status of on-line nuclear techniques in analysis of coal quality

International Nuclear Information System (INIS)

Cai Shaohui

1993-01-01

Nuclear techniques are favourable for continuous on-line analysis, because they are fast, non-intrusive. They can be used in the adverse circumstances in coal industry. The paper reviews the application status of on-line nuclear techniques in analysis of coal quality and economic benefits derived from such techniques in developed countries

Diversity analysis of Ethiopian mustard breeding lines using RAPD ...

African Journals Online (AJOL)

Using cluster analysis based on unweighted pair-group method with arithmetic average (UPGMA) and principal coordinate analysis (PCoA), the 21 Ethiopian inbred lines were grouped into three subgroups and the single genotype introduced from Sweden formed a separate group. The clustering pattern failed to show a ...

On-line moisture analysis

International Nuclear Information System (INIS)

Cutmore, N.G.; Mijak, D.G

2002-01-01

Measurement of the moisture content of iron ore has become a key issue for controlling moisture additions for dust suppression. In most cases moisture content is still determined by manual or automatic sampling of the ore stream, followed by conventional laboratory analysis by oven drying. Although this procedure enables the moisture content to be routinely monitored, it is too slow for control purposes. This has generated renewed interest in on-line techniques for the accurate and rapid measurement of moisture in iron ore on conveyors. Microwave transmission techniques have emerged over the past 40 years as the dominant technology for on-line measurement of moisture in bulk materials, including iron ores. Alternative technologies have their limitations. Infra-red analysers are used in a variety of process industries, but rely on the measurement of absorption by moisture in a very thin surface layer. Consequently such probes may be compromised by particle size effects and biased presentation of the bulk material. Nuclear-based analysers measure the total hydrogen content in the sample and do not differentiate between free and combined moisture. Such analysers may also be sensitive to material presentation and elemental composition. Very low frequency electromagnetic probes, such as capacitance or conductance probes, operate in the frequency region where the DC conductivity dominates much of the response, which is a function not only of moisture content but also of ionic composition and chemistry. These problems are overcome using microwave transmission techniques, which also have the following advantages, as a true bulk moisture analysis is obtained, because a high percentage of the bulk material is analysed; the moisture estimate is mostly insensitive to any biased presentation of moisture, for example due to stratification of bulk material with different moisture content and because no physical contact is made between the sensor and the bulk material. This is

Semiquantitative analysis of corrosion products in iron channel by the X-ray diffraction technique

International Nuclear Information System (INIS)

Bueno, C.R.E.; Varela, J.A.

1995-01-01

The corrosion in the us very important in the slag line region, but in others regions over and above this line there is a corrosion process still important. We have made a detailed mapping of phases present in seven different regions in the iron channel in three distinct positions. After the phases identifications, it was made a deconvolution of the diffractograms using Gaussian functions. The analysis of the relative intensity of each phase gave an idea for a semi-quantitative analysis and we have proposed a mechanism of the refractory corrosion. It was observed that the calcium oxide migrates by diffusion to different regions originating low melting point products like pseudo-wolastonite, anorthite and guelenite. (author)

An avian cell line designed for production of highly attenuated viruses.

Science.gov (United States)

Jordan, Ingo; Vos, Ad; Beilfuss, Stefanie; Neubert, Andreas; Breul, Sabine; Sandig, Volker

2009-01-29

Several viral vaccines, including highly promising vectors such as modified vaccinia Ankara (MVA), are produced on chicken embryo fibroblasts. Dependence on primary cells complicates production especially in large vaccination programs. With primary cells it is also not possible to create packaging lines for replication-deficient vectors that are adapted to proliferation in an avian host. To obviate requirement for primary cells permanent lines from specific tissues of muscovy duck were derived (AGE1.CR, CS, and CA) and further modified: we demonstrate that stable expression of the structural gene pIX from human adenovirus increases titers for unrelated poxvirus in the avian cells. This augmentation appears to be mediated via induction of heat shock and thus provides a novel cellular substrate that may allow further attenuation of vaccine strains.

Development of on-line heavy water analysis by vibrating probe density meter and multiple internal reflectance infrared spectrometry

International Nuclear Information System (INIS)

Jones, V.D.; Nora, B.

1984-01-01

Achieving high productivity in the Savannah River Plant nuclear reactors requires that the heavy water (D 2 O) moderator be maintained at a high purity level. Since the D 2 O purity will degrade with time, a fraction of the moderator must be continually reprocessed to remove H 2 O. This rework process uses a series of fractional distillation columns. The process control is based on laboratory analyses of process samples every four hours. The sample streams, which can range from 0.10 to 99.80 mol % D 2 O, are analyzed using infrared spectrophotometry. An automatic on-line analysis would provide tighter process control and reduce personnel exposure to the tritiated moderator. Two instruments are being evaluated for on-line control; an Anton/Parr DPR 2000 density measuring system and a General Analysis Corporation LAN-I infrared liquid stream monitor

Exergy analysis of wine production: Red wine production process as a case study

International Nuclear Information System (INIS)

Genc, Mahmut; Genc, Seda; Goksungur, Yekta

2017-01-01

Highlights: • Red wine production process was studied thermodynamically by exergy analysis method. • The first study on exergetic analysis of a red wine production process. • Energetic and exergetic efficiencies are calculated as 57.2 and 41.8%, respectively. • Cumulative exergy loss is computed as 2692.51 kW for 1 kg/s grape. • Specific exergy loss is found as 5080.20 kW/kg wine. - Abstract: This paper performs exergy analysis of a red wine production line and defines the exergy destruction rates to assess the system performance in terms of sustainability. A model study with necessary data is chosen for the calculations. The total exergy destruction rate of the overall system was determined to be 344.08 kW while the greatest destruction rate of the exergy in the whole system occurred in the open fermenter (333.6 kW). The system thermal efficiency was obtained to be 57.2% while the exergy efficiency was calculated as 41.8%. The total exergy destruction rate of the overall system increases with the increase both in the grape flow rate and the reference temperature when the reference pressure is assumed as 101.325 kPa. Furthermore, the chemical exergy of streams was found much higher than the physical exergy for each stream. The exergy results were illustrated through the Grassmann diagram. Furthermore, cumulative exergy loss and specific exergy loss values were determined as 2692.51 kW/1 kg/s grape processed and 5080.20 kW/kg wine, respectively.

Evaluation of the agronomic performance of atrazine-tolerant transgenic japonica rice parental lines for utilization in hybrid seed production.

Directory of Open Access Journals (Sweden)

Luhua Zhang

Full Text Available Currently, the purity of hybrid seed is a crucial limiting factor when developing hybrid japonica rice (Oryza sativa L.. To chemically control hybrid seed purity, we transferred an improved atrazine chlorohydrolase gene (atzA from Pseudomonas ADP into hybrid japonica parental lines (two maintainers, one restorer, and Nipponbare, by using Agrobacterium-mediated transformation. We subsequently selected several transgenic lines from each genotype by using PCR, RT-PCR, and germination analysis. In the presence of the investigated atrazine concentrations, particularly 150 µM atrazine, almost all of the transgenic lines produced significantly larger seedlings, with similar or higher germination percentages, than did the respective controls. Although the seedlings of transgenic lines were taller and gained more root biomass compared to the respective control plants, their growth was nevertheless inhibited by atrazine treatment compared to that without treatment. When grown in soil containing 2 mg/kg or 5 mg/kg atrazine, the transgenic lines were taller, and had higher total chlorophyll contents than did the respective controls; moreover, three of the strongest transgenic lines completely recovered after 45 days of growth. After treatment with 2 mg/kg or 5 mg/kg of atrazine, the atrazine residue remaining in the soil was 2.9-7.0% or 0.8-8.7% respectively, for transgenic lines, and 44.0-59.2% or 28.1-30.8%, respectively, for control plants. Spraying plants at the vegetative growth stage with 0.15% atrazine effectively killed control plants, but not transgenic lines. Our results indicate that transgenic atzA rice plants show tolerance to atrazine, and may be used as parental lines in future hybrid seed production.

—Pricing Digital Content Product Lines: A Model and Application for the National Academies Press

OpenAIRE

P. K. Kannan; Barbara Kline Pope; Sanjay Jain

2009-01-01

We examine the problem of how a content provider, specifically the National Academies Press (NAP), can optimally price the different forms of its product—print and PDF—that it sells online. Whereas products in the traditional product line generally tend to be substitutes, the different content product forms could range from being substitutes to being complements across customers. Thus the content provider can possibly sell bundles of the product forms, leading to additional revenue. We first ...

EXPERIENCES INITIATING SOFTWARE PRODUCT LINE ENGINEERING IN SMALL TEAMS WITH PULSE

DEFF Research Database (Denmark)

Mærsk-Møller, Hans Martin; Jørgensen, Bo Nørregaard

2010-01-01

Small teams of software engineers are represented both in small companies and semi-independent fractions in medium and large companies. Even though some results and experience papers have been published in the context of Small- and Medium-Sized Enterprises (SMEs), there is a lack of experience pa...... an existing methodology, PuLSETM, drew advantages of NetBeans Rich Client Platform, and based the product line on the existing application....

Production of higher quality bio-oils by in-line esterification of pyrolysis vapor

Science.gov (United States)

Hilten, Roger Norris; Das, Keshav; Kastner, James R; Bibens, Brian P

2014-12-02

The disclosure encompasses in-line reactive condensation processes via vapor phase esterification of bio-oil to decease reactive species concentration and water content in the oily phase of a two-phase oil, thereby increasing storage stability and heating value. Esterification of the bio-oil vapor occurs via the vapor phase contact and subsequent reaction of organic acids with ethanol during condensation results in the production of water and esters. The pyrolysis oil product can have an increased ester content and an increased stability when compared to a condensed pyrolysis oil product not treated with an atomized alcohol.

Atlas transmission line breakdown analysis

CERN Document Server

Nielsen, K E; Ballard, E O; Elizondo, J M; Gribble, R F; McCuistian, B T; Parsons, W M

1999-01-01

The Atlas facility will use 24 radially converging, vertically oriented and tapered, oil insulated, triplate transmission lines between the Marx generators and the central load region. Among the requirements of the transmission lines are low inductance and high reliability. The inter-conductor gap is nominally 2 cm and the lines taper from a height of 1.75 m at the Marx end to 0.32 m at the output end. The aluminum conductors, held together by 20 insulating spacers, are assembled and inserted as a unit into radial oil-filled steel tanks. The negative, high-voltage, center conductor is 2.54-cm thick and the outer ground conductors are 1.59-cm thick. All 24 triplate transmission lines connect to a transition section at near 1 m radius that couples the transmission lines to a disk/conical solid- dielectric-insulated power flow channel transmission line terminating at the load. Peak operating voltage on the lines can be as high as 240 kV with an effective stress time of 0.8 mu s. Testing of small sections of the ...

Inspection logistics planning for multi-stage production systems with applications to semiconductor fabrication lines

Science.gov (United States)

Chen, Kyle Dakai

Since the market for semiconductor products has become more lucrative and competitive, research into improving yields for semiconductor fabrication lines has lately received a tremendous amount of attention. One of the most critical tasks in achieving such yield improvements is to plan the in-line inspection sampling efficiently so that any potential yield problems can be detected early and eliminated quickly. We formulate a multi-stage inspection planning model based on configurations in actual semiconductor fabrication lines, specifically taking into account both the capacity constraint and the congestion effects at the inspection station. We propose a new mixed First-Come-First-Serve (FCFS) and Last-Come-First-Serve (LCFS) discipline for serving the inspection samples to expedite the detection of potential yield problems. Employing this mixed FCFS and LCFS discipline, we derive approximate expressions for the queueing delays in yield problem detection time and develop near-optimal algorithms to obtain the inspection logistics planning policies. We also investigate the queueing performance with this mixed type of service discipline under different assumptions and configurations. In addition, we conduct numerical tests and generate managerial insights based on input data from actual semiconductor fabrication lines. To the best of our knowledge, this research is novel in developing, for the first time in the literature, near-optimal results for inspection logistics planning in multi-stage production systems with congestion effects explicitly considered.

ANALISIS TOTAL PRODUCTIVE MAINTENANCE PADA LINE 8/CARBONATED SOFT DRINK PT COCA-COLA BOTTLING INDONESIA CENTRAL JAVA

Directory of Open Access Journals (Sweden)

Darminto Pujotomo

2012-02-01

Full Text Available PT. Coca-Cola Bottling Indonesia (CCBI Central Java merupakan salah satu perusahaan produsen minuman ringan yang terkemuka di Indonesia, dengan dua jenis kelompok produk yang dihasilkan yaitu minuman karbonasi/Carbonated Soft Drink (Coca-Cola, Sprite, dan Fanta dan non-karbonasi (Frestea dan Ades. Dalam usaha untuk mempertahankan mutu dan meningkatkan produktifitas, salah satu faktor yang harus diperhatikan adalah masalah perawatan fasilitas/mesin produksi.  Makalah ini membahas mengenai penyebab dan akibat yang ditimbulkan oleh breakdown mesin terjadi pada Line 8/Carbonated Soft Drink, khususnya pada conveyor, filler machine, dan bottle washer machine. Untuk mendapatkan mesin yang dapat terjaga keterandalannya dibutuhkan suatu konsep yang baik. Total Productive Maintenance (TPM merupakan sebuah konsep yang baik untuk merealisasikan hal tersebut. Konsep ini, selain melibatkan semua personil dalam perusahaan, juga bertujuan untuk merawat semua fasilitas produksi yang dimiliki perusahaan.Data yang digunakan merupakan data breakdown conveyor, filler machine, dan bottle washer machine dari ME Monthly Report PT.CCBI selama bulan Januari-Desember 2005 khususnya line 8. Selain itu makalah ini juga membahas performance maintenance PT. Coca-Cola Bottling Indonesia-Central Java, dengan memperhitungkan nilai Mean Time Beetwen Failure (MTBF, Mean Time To Repair (MTTR, serta Availability mesin, dengan menggunakan data record Line 8 selama bulan Mei 2006 sampai bulan Juli 2006. Sehingga nantinya akan diketahui informasi keadaan aktual dari perusahaan tentang sistem perawatannya, khususnya pada Line 8/Carbonated Soft Drink apakah baik atau buruk. Kata kunci : Total Production Maintenance, Conveyor, Filler Machine, Bottle Washer Machine, Performance Maintenance   PT. Coca-Cola Bottling Indonesia (CCBI-Central Java represent one of notable light beverage producer company in Indonesia, with two product group type yielded is carbonated beverage/Carbonated Soft

The FTS atomic spectrum tool (FAST) for rapid analysis of line spectra

Science.gov (United States)

Ruffoni, M. P.

2013-07-01

The FTS Atomic Spectrum Tool (FAST) is an interactive graphical program designed to simplify the analysis of atomic emission line spectra obtained from Fourier transform spectrometers. Calculated, predicted and/or known experimental line parameters are loaded alongside experimentally observed spectral line profiles for easy comparison between new experimental data and existing results. Many such line profiles, which could span numerous spectra, may be viewed simultaneously to help the user detect problems from line blending or self-absorption. Once the user has determined that their experimental line profile fits are good, a key feature of FAST is the ability to calculate atomic branching fractions, transition probabilities, and oscillator strengths-and their uncertainties-which is not provided by existing analysis packages. Program SummaryProgram title: FAST: The FTS Atomic Spectrum Tool Catalogue identifier: AEOW_v1_0 Program summary URL: http://cpc.cs.qub.ac.uk/summaries/AEOW_v1_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: GNU General Public License version 3 No. of lines in distributed program, including test data, etc.: 293058 No. of bytes in distributed program, including test data, etc.: 13809509 Distribution format: tar.gz Programming language: C++. Computer: Intel x86-based systems. Operating system: Linux/Unix/Windows. RAM: 8 MB minimum. About 50-200 MB for a typical analysis. Classification: 2.2, 2.3, 21.2. Nature of problem: Visualisation of atomic line spectra including the comparison of theoretical line parameters with experimental atomic line profiles. Accurate intensity calibration of experimental spectra, and the determination of observed relative line intensities that are needed for calculating atomic branching fractions and oscillator strengths. Solution method: FAST is centred around a graphical interface, where a user may view sets of experimental line profiles and compare

LineVISAR. A fringe-trace data analysis program

Energy Technology Data Exchange (ETDEWEB)

Furnish, Michael D. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2014-02-01

The line-imaging ORVIS or VISAR provides velocity as a function of position and time for a line on an experimental setup via a streak camera record of interference fringes. This document describes a Matlab-based program which guides the user through the process of converting these fringe data to a velocity surface. The data reduction is of the "fringe trace" type, wherein the changes in velocity at a given position on the line are calculated based on fringe motion past that point. The analyst must establish the fringe behavior up front, aided by peak-finding routines in the program. However, the later work of using fringe jumps to compensate for phase problems in other analysis techniques is greatly reduced. This program is not a standard GUI construction, and is prescriptive. At various points it saves the progress, allowing later restarts from those points.

Heterogeneity in both cytokine production and responsiveness of a panel of monoclonal human Epstein-Barr virus-transformed B-cell lines

NARCIS (Netherlands)

Jochems, G. J.; Klein, M. R.; Jordens, R.; Pascual-Salcedo, D.; van Boxtel-Oosterhof, F.; van Lier, R. A.; Zeijlemaker, W. P.

1991-01-01

To optimize growth and Ig production of in vitro-cultured Epstein-Barr virus (EBV)-transformed B cells, a panel of six monoclonal EBV B-cell lines was analyzed for autocrine growth factor production and responsiveness to various cytokines. Three cell lines produced Il-I and four produced Il-6,

Characteristics of Speed Line Cutter and Fringe Analysis of Workpiece Surface

Directory of Open Access Journals (Sweden)

Shuai Wang

2014-02-01

Full Text Available Easy to operate, speed line cutter has a high machining cost performance, so is very popular among the majority of users. The precision of guide rails, screws and nuts used in most of the machines is not high, and the machine control cannot compensate for the screw pitch error, clearance during the transmission and machining error due to electrode wear. Furthermore, control signal may also be lost in control process. The development of speed line cutter focuses on the quality and machining stability of CNC speed line cutter. This article makes an analysis about the impact of machine’s inherent characteristics on machining workpiece surface, and concludes that analysis shall be made on the irregular fringe, therefore to heighten the machining precision.

Decreased immunoglobulin production by a human lymphoid cell line following melphalan treatment

Energy Technology Data Exchange (ETDEWEB)

Griffin, G.D. (Oak Ridge National Lab., TN); Owen, B.A.; Atchley, C.E.; Novelli, G.D.; Solomon, A.

1982-11-01

The effect of melphalan on immunoglobulin G (IgG) production by a human lymphoblastoid cell line (BF) was studied. The amount of secreted IgG and the percentage of cells containing cytoplasmic IgG were measured by immunoassay and cytofluorometry, respectively. Dose-response studies indicated that melphalan concentrations of 2 x 10/sup -8/ M had no effect, while concentrations of 8 x 10/sup -7/ M were totally toxic, after 72-h exposures to the drug. Statistically significant, persistent, alterations in both synthesis and secretion of IgG by BF cells were observed following treatment for 72 h with 4 x 10/sup -7/ M melphalan, and there was an increase in population-doubling time from 24 to 72 h in these drug-treated cells. The percentage of IgG-containing cells in melphalan-treated cultures was significantly decreased as compared to control cultures. IgG secretion was also decreased in these cultures, and the variation in IgG secretion as a function of cellular growth was significantly altered following melphalan treatment. Decreased IgG production following melphalan treatment may be related to altered cell cycle kinetics. Based on immunological analysis, there was no evident alteration in the IgG secreted by melphalan-treated cells, nor did melphalan treatment produce a cellular population lacking IgG entirely.

Mass and loss analysis of a space-type radiation cooled insulated DC transmission line

International Nuclear Information System (INIS)

Schwarze, g.E.

1986-01-01

As both the power levels and transmission distances increase such as for large future nuclear power systems, the transmission line becomes an important element in the power chain between the source and load bus. Thus, the transmission line's characteristics must be determined so that the effect of these characteristics on the total power system can be assessed. These design characteristics include the specific mass, percent power loss, size, voltage and power levels, and operating temperatures of the conductor and insulating materials. In a previous paper, the dc transmission line's characteristics of a noninsulated solid cylindrical conductor were determined. In that analysis the expression derived for the transmission line's mass only included the conductor mass and the operating temperature of the line was that of the conductor. In the analysis of this paper, a single layer of insulation is added to the solid cylindrical conductor. In this analysis the dependency of the dc transmission line's mass, loss, and size on the power and voltage levels, conductor and insulation surface temperatures, transmission distance, and conductor and insulation material properties is determined. This analysis can be extended to multi-layers of insulation but the complexity of the analysis increases as the number of layers increase

Determination of the sulfur mustard hydrolysis product thiodiglycol by microcolumn liquid chromatography coupled on-line with sulfur flame photometric detection using large-volume injections and peak

NARCIS (Netherlands)

Hooijschuur, E.W.J.; Kientz, C.E.; Brinkman, U.A.T.

1999-01-01

A selective, direct and relatively rapid method has been developed for the determination of thiodiglycol (TDG) in aqueous samples. TDG is the main hydrolysis product of the chemical warfare agent sulfur mustard. The method of analysis is based on the on-line coupling of reversed-phase microcolumn

The degradation of lining of rotary furnaces in the production of zinc oxide

Czech Academy of Sciences Publication Activity Database

Luptáková, Natália; Pešlová, F.; Anisimov, E.

2014-01-01

Roč. 21, č. 3 (2014), s. 116-121 ISSN 1335-0803 Institutional support: RVO:68081723 Keywords : zinc oxide * the production of zinc oxide * zinc slag * refractories * the degradation of rotary furnace linings Subject RIV: JG - Metallurgy http://ojs.mateng.sk/index.php/Mateng/article/view/133/194

Computerized information system for inventory-taking and verification at a nuclear fuel fabrication plant with closed production lines

International Nuclear Information System (INIS)

Bahm, W.; Brueckner, C.; Hartmann, G.

1976-01-01

By means of a model the use of electronic data processing is studied for preparing inventory listings and for inventory verification in a fabrication plant for Pu-U mixed-oxide fuel pins. It is postulated that interruptions in operation should be avoided as much as possible. Closed-Line production is assumed so that access to nuclear material calls for special withdrawal via locks. The production line is subdivided into sections with measuring points placed in between to record the nuclear material flow. The measured results are fed to a central data acquisition and reporting system capable of calculating on-line from these results the book inventories present in the individual sections. Inventory-taking and verification are carried out simultaneously in the sections of the production line using the EDP system. The production is not interrupted for this purpose. The production stream is tagged prior to reaching a section to be measured and is subsequently measured when entering the respective section until the tag has reached the end of the section. The measurement can be verified by inspectors. Movements of nuclear materials in and from other plant areas such as the storage area are likewise fed into the central data processing system so that inventory lists can be recalled at any moment. By this means the inventory can be taken quickly and at any time. The inventory is verified in the conventional way. (author)

A Framework for the Comparative Assessment of Neuronal Spike Sorting Algorithms towards More Accurate Off-Line and On-Line Microelectrode Arrays Data Analysis.

Science.gov (United States)

Regalia, Giulia; Coelli, Stefania; Biffi, Emilia; Ferrigno, Giancarlo; Pedrocchi, Alessandra

2016-01-01

Neuronal spike sorting algorithms are designed to retrieve neuronal network activity on a single-cell level from extracellular multiunit recordings with Microelectrode Arrays (MEAs). In typical analysis of MEA data, one spike sorting algorithm is applied indiscriminately to all electrode signals. However, this approach neglects the dependency of algorithms' performances on the neuronal signals properties at each channel, which require data-centric methods. Moreover, sorting is commonly performed off-line, which is time and memory consuming and prevents researchers from having an immediate glance at ongoing experiments. The aim of this work is to provide a versatile framework to support the evaluation and comparison of different spike classification algorithms suitable for both off-line and on-line analysis. We incorporated different spike sorting "building blocks" into a Matlab-based software, including 4 feature extraction methods, 3 feature clustering methods, and 1 template matching classifier. The framework was validated by applying different algorithms on simulated and real signals from neuronal cultures coupled to MEAs. Moreover, the system has been proven effective in running on-line analysis on a standard desktop computer, after the selection of the most suitable sorting methods. This work provides a useful and versatile instrument for a supported comparison of different options for spike sorting towards more accurate off-line and on-line MEA data analysis.

Hybrid simulation models of production networks

CERN Document Server

Kouikoglou, Vassilis S

2001-01-01

This book is concerned with a most important area of industrial production, that of analysis and optimization of production lines and networks using discrete-event models and simulation. The book introduces a novel approach that combines analytic models and discrete-event simulation. Unlike conventional piece-by-piece simulation, this method observes a reduced number of events between which the evolution of the system is tracked analytically. Using this hybrid approach, several models are developed for the analysis of production lines and networks. The hybrid approach combines speed and accuracy for exceptional analysis of most practical situations. A number of optimization problems, involving buffer design, workforce planning, and production control, are solved through the use of hybrid models.

The degradation of lining of rotary furnaces in the production of zinc oxide

OpenAIRE

Natália Luptáková; Evgeniy Anisimov; Františka Pešlová

2014-01-01

This paper is closely connected with the complex problem of degradation relating to the refractories of rotary furnace linings in the production of zinc oxide. Zinc oxide can be produced by variety of ways, but the most common method of production which is used in Europe is indirect, i.e. pyrolytic combustion of zinc. This method is also called "French process" of manufacturing ZnO. But this mentioned method of preparation leads to the creation of the enormous amount of zinc slag including ch...

Probabilistic Safety Analysis of High Speed and Conventional Lines Using Bayesian Networks

Energy Technology Data Exchange (ETDEWEB)

Grande Andrade, Z.; Castillo Ron, E.; O' Connor, A.; Nogal, M.

2016-07-01

A Bayesian network approach is presented for probabilistic safety analysis (PSA) of railway lines. The idea consists of identifying and reproducing all the elements that the train encounters when circulating along a railway line, such as light and speed limit signals, tunnel or viaduct entries or exits, cuttings and embankments, acoustic sounds received in the cabin, curves, switches, etc. In addition, since the human error is very relevant for safety evaluation, the automatic train protection (ATP) systems and the driver behavior and its time evolution are modelled and taken into account to determine the probabilities of human errors. The nodes of the Bayesian network, their links and the associated probability tables are automatically constructed based on the line data that need to be carefully given. The conditional probability tables are reproduced by closed formulas, which facilitate the modelling and the sensitivity analysis. A sorted list of the most dangerous elements in the line is obtained, which permits making decisions about the line safety and programming maintenance operations in order to optimize them and reduce the maintenance costs substantially. The proposed methodology is illustrated by its application to several cases that include real lines such as the Palencia-Santander and the Dublin-Belfast lines. (Author)

Methodology supporting production control in a foundry applying modern DISAMATIC molding line

Directory of Open Access Journals (Sweden)

Sika Robert

2017-01-01

Full Text Available The paper presents methodology of production control using statistical methods in foundry conditions, using the automatic DISAMATIC molding line. The authors were inspired by many years of experience in implementing IT tools for foundries. The authors noticed that there is a lack of basic IT tools dedicated to specific casting processes, that would greatly facilitate their oversight and thus improve the quality of manufactured products. More and more systems are installed in the ERP or CAx area, but they integrate processes only partially, mainly in the area of technology design and business management from finance and control. Monitoring of foundry processes can generate a large amount of process-related data. This is particularly noticeable in automated processes. An example is the modern DISAMATIC molding line, which integrates several casting processes, such as mold preparation, assembly, pouring or shake out. The authors proposed a methodology that supports the control of the above-mentioned foundry processes using statistical methods. Such an approach can be successfully used, for example, during periodic external audits. The mentioned methodology in the innovative DISAM-ProdC computer tool was implemented.

Analysis of the type II robotic mixed-model assembly line balancing problem

Science.gov (United States)

Çil, Zeynel Abidin; Mete, Süleyman; Ağpak, Kürşad

2017-06-01

In recent years, there has been an increasing trend towards using robots in production systems. Robots are used in different areas such as packaging, transportation, loading/unloading and especially assembly lines. One important step in taking advantage of robots on the assembly line is considering them while balancing the line. On the other hand, market conditions have increased the importance of mixed-model assembly lines. Therefore, in this article, the robotic mixed-model assembly line balancing problem is studied. The aim of this study is to develop a new efficient heuristic algorithm based on beam search in order to minimize the sum of cycle times over all models. In addition, mathematical models of the problem are presented for comparison. The proposed heuristic is tested on benchmark problems and compared with the optimal solutions. The results show that the algorithm is very competitive and is a promising tool for further research.

Analysis of Microstrip Line Fed Patch Antenna for Wireless Communications

Directory of Open Access Journals (Sweden)

Singh Ashish

2017-11-01

Full Text Available In this paper, theoretical analysis of microstrip line fed rectangular patch antenna loaded with parasitic element and split-ring resonator is presented. The proposed antenna shows that the dualband operation depends on gap between parasitic element, split-ring resonator, length and width of microstrip line. It is found that antenna resonates at two distinct resonating modes i.e., 0.9 GHz and 1.8 GHz for lower and upper resonance frequencies respectively. The antenna shows dual frequency nature with frequency ratio 2.0. The characteristics of microstrip line fed rectangular patch antenna loaded with parasitic element and split-ring resonator antenna is compared with other prototype microstrip line fed antennas. Further, the theoretical results are compared with simulated and reported experimental results, they are in close agreement.

Performance Analysis of GFDL's GCM Line-By-Line Radiative Transfer Model on GPU and MIC Architectures

Science.gov (United States)

Menzel, R.; Paynter, D.; Jones, A. L.

2017-12-01

Due to their relatively low computational cost, radiative transfer models in global climate models (GCMs) run on traditional CPU architectures generally consist of shortwave and longwave parameterizations over a small number of wavelength bands. With the rise of newer GPU and MIC architectures, however, the performance of high resolution line-by-line radiative transfer models may soon approach those of the physical parameterizations currently employed in GCMs. Here we present an analysis of the current performance of a new line-by-line radiative transfer model currently under development at GFDL. Although originally designed to specifically exploit GPU architectures through the use of CUDA, the radiative transfer model has recently been extended to include OpenMP in an effort to also effectively target MIC architectures such as Intel's Xeon Phi. Using input data provided by the upcoming Radiative Forcing Model Intercomparison Project (RFMIP, as part of CMIP 6), we compare model results and performance data for various model configurations and spectral resolutions run on both GPU and Intel Knights Landing architectures to analogous runs of the standard Oxford Reference Forward Model on traditional CPUs.

Using titer and titer normalized to confluence are complementary strategies for obtaining Chinese hamster ovary cell lines with high volumetric productivity of etanercept

DEFF Research Database (Denmark)

Pristovšek, Nuša; Hansen, Henning Gram; Sergeeva, Daria

2018-01-01

The selection of clonally-derived Chinese hamster ovary (CHO) cell lines with the highest production rate of recombinant glycoproteins remains a big challenge during early stages of cell line development. Different strategies using either product titer or product titer normalized to cell number...

Manufacturing system design based on axiomatic design: Case of assembly line

Energy Technology Data Exchange (ETDEWEB)

Hager, T.; Wafik, H.; Faouzi, M.

2017-07-01

In this paper, a combined Production Line Design (PLD) process which includes many design aspects is presented, developed and validated. Design/methodology/approach: The PLD process is based on the SADT (Structured Analysis and Design Technique) diagram and the Axiomatic Design (AD) method. Practical implications: For a purpose of validation, this proposed process has been applied in a manufacturing company and it has been validated by simulation. Findings: The results of the validation indicated that the production line designed by this process is outperformed the initial line of the company. Originality/value: Recently, the problems of production line design (PLD) have attracted the attention of many researchers. However, only a few studies have treated the PLD which includes all design aspects. In this work, a combined PLD process is presented. It should be noted that the proposed process is simple and effective.

Manufacturing system design based on axiomatic design: Case of assembly line

International Nuclear Information System (INIS)

Hager, T.; Wafik, H.; Faouzi, M.

2017-01-01

In this paper, a combined Production Line Design (PLD) process which includes many design aspects is presented, developed and validated. Design/methodology/approach: The PLD process is based on the SADT (Structured Analysis and Design Technique) diagram and the Axiomatic Design (AD) method. Practical implications: For a purpose of validation, this proposed process has been applied in a manufacturing company and it has been validated by simulation. Findings: The results of the validation indicated that the production line designed by this process is outperformed the initial line of the company. Originality/value: Recently, the problems of production line design (PLD) have attracted the attention of many researchers. However, only a few studies have treated the PLD which includes all design aspects. In this work, a combined PLD process is presented. It should be noted that the proposed process is simple and effective.

[Measurement and analysis of smile line of 62 Han-Chinese].

Science.gov (United States)

Hu, Xiu-lian; Heberer, Susanne; Nelson, Katja; Lin, Ye

2011-11-01

To analyze smile features in maximum lip-dynamic in Chinese. Sixty-two Han-Chinese, travelling in Germany, with a mean age of 28.5 years were enrolled and photographed. Standardized digital photos were made to measure the height of displayed maxillary gingiva, papilla and tooth during an enjoyment smile. Statistical analysis was performed using Mann-Whitney-U Test and non-parametric analysis. The mean height of tooth display for the central incisors was 10 mm, with no significant difference between the gender (P > 0.05). The mean height of gingival display was 1.3 mm and the mean papilla height was 3.4 mm. There was no significant difference between the genders (P > 0.05). 31% (19/62) of the subjects belonged to high smile line type, 50% (31/62) to medium smile line type and 19% (12/62) to low smile line type. The red esthetics is a paramount factor for Chinese men and women in the esthetic restoration. 81% of the Chinese studied showed various degree of gingival exposure from central incisor to the premolars, which defined the esthetic area for Chinese people. Papilla is a critical parameter for esthetic evaluation and treatment design. The ratio of high smile line in Chinese may be higher than that in Caucasian.

STRUCTURE LINE DETECTION FROM LIDAR POINT CLOUDS USING TOPOLOGICAL ELEVATION ANALYSIS

Directory of Open Access Journals (Sweden)

C. Y. Lo

2012-07-01

Full Text Available Airborne LIDAR point clouds, which have considerable points on object surfaces, are essential to building modeling. In the last two decades, studies have developed different approaches to identify structure lines using two main approaches, data-driven and modeldriven. These studies have shown that automatic modeling processes depend on certain considerations, such as used thresholds, initial value, designed formulas, and predefined cues. Following the development of laser scanning systems, scanning rates have increased and can provide point clouds with higher point density. Therefore, this study proposes using topological elevation analysis (TEA to detect structure lines instead of threshold-dependent concepts and predefined constraints. This analysis contains two parts: data pre-processing and structure line detection. To preserve the original elevation information, a pseudo-grid for generating digital surface models is produced during the first part. The highest point in each grid is set as the elevation value, and its original threedimensional position is preserved. In the second part, using TEA, the structure lines are identified based on the topology of local elevation changes in two directions. Because structure lines can contain certain geometric properties, their locations have small relieves in the radial direction and steep elevation changes in the circular direction. Following the proposed approach, TEA can be used to determine 3D line information without selecting thresholds. For validation, the TEA results are compared with those of the region growing approach. The results indicate that the proposed method can produce structure lines using dense point clouds.

Genetic analysis of partial egg production records in Japanese quail using random regression models.

Science.gov (United States)

Abou Khadiga, G; Mahmoud, B Y F; Farahat, G S; Emam, A M; El-Full, E A

2017-08-01

The main objectives of this study were to detect the most appropriate random regression model (RRM) to fit the data of monthly egg production in 2 lines (selected and control) of Japanese quail and to test the consistency of different criteria of model choice. Data from 1,200 female Japanese quails for the first 5 months of egg production from 4 consecutive generations of an egg line selected for egg production in the first month (EP1) was analyzed. Eight RRMs with different orders of Legendre polynomials were compared to determine the proper model for analysis. All criteria of model choice suggested that the adequate model included the second-order Legendre polynomials for fixed effects, and the third-order for additive genetic effects and permanent environmental effects. Predictive ability of the best model was the highest among all models (ρ = 0.987). According to the best model fitted to the data, estimates of heritability were relatively low to moderate (0.10 to 0.17) showed a descending pattern from the first to the fifth month of production. A similar pattern was observed for permanent environmental effects with greater estimates in the first (0.36) and second (0.23) months of production than heritability estimates. Genetic correlations between separate production periods were higher (0.18 to 0.93) than their phenotypic counterparts (0.15 to 0.87). The superiority of the selected line over the control was observed through significant (P egg production in earlier ages (first and second months) than later ones. A methodology based on random regression animal models can be recommended for genetic evaluation of egg production in Japanese quail. © 2017 Poultry Science Association Inc.

Managerial competence of first-line nurse managers: A concept analysis.

Science.gov (United States)

Gunawan, Joko; Aungsuroch, Yupin

2017-02-01

A variety of terms are used interchangeably to define managerial competence of first-line nurse managers. This has resulted in a degree of ambiguity in the way managerial competence is described. The aim of this concept analysis is to clarify what is meant by managerial competence of first-line nurse managers internationally, what attributes signify it, and what its antecedents and consequences are. The Walker and Avant concept analysis approach was applied. The attributes of managerial competence include developing self, planning, organizing, leading, managing legal and ethical issues, and delivering health care. Antecedents to managerial competence include internal and external factors. Consequences include nurse performances, nurse and patient outcomes, intention to stay of nurses, and nurse and patient satisfaction. This analysis helps first-line nurse managers to understand the concept and determine where the responsibility lies in establishing a definition of managerial competence. It is recommended that middle and top managers should be aware of the internal and external factors as antecedents of the concept. Further research is needed to illuminate the attributes of managerial competence in relation to antecedents and the potential effect upon the consequences, and the need to establish managerial competence evaluation. © 2017 John Wiley & Sons Australia, Ltd.

The impact of bad fit product line extensions on brand personality

OpenAIRE

Lima, Pedro

2017-01-01

This work project intended to study the impact of a bad fit product line extension on brand personality. To do that, the focus of the study was narrowed down to one dimension of the brand personality, ruggedness, and another one as a comparative dimension, sophistication. The test consisted in the introduction of a bad fit extension by two brands: Harley-Davidson and Jaguar. The findings show us that a bad fit extension has more impact in the sophistication dimension (increased the dimension ...

A global RNA-seq-driven analysis of CHO host and production cell lines reveals distinct differential expression patterns of genes contributing to recombinant antibody glycosylation.

Science.gov (United States)

Könitzer, Jennifer D; Müller, Markus M; Leparc, Germán; Pauers, Martin; Bechmann, Jan; Schulz, Patrick; Schaub, Jochen; Enenkel, Barbara; Hildebrandt, Tobias; Hampel, Martin; Tolstrup, Anne B

2015-09-01

Boehringer Ingelheim uses two CHO-DG44 lines for manufacturing biotherapeutics, BI-HEX-1 and BI-HEX-2, which produce distinct cell type-specific antibody glycosylation patterns. A recently established CHO-K1 descended host, BI-HEX-K1, generates antibodies with glycosylation profiles differing from CHO-DG44. Manufacturing process development is significantly influenced by these unique profiles. To investigate the underlying glycosylation related gene expression, we leveraged our CHO host and production cell RNA-seqtranscriptomics and product quality database together with the CHO-K1 genome. We observed that each BI-HEX host and antibody producing cell line has a unique gene expression fingerprint. CHO-DG44 cells only transcribe Fut10, Gfpt2 and ST8Sia6 when expressing antibodies. BI-HEX-K1 cells express ST8Sia6 at host cell level. We detected a link between BI-HEX-1/BI-HEX-2 antibody galactosylation and mannosylation and the gene expression of the B4galt gene family and genes controlling mannose processing. Furthermore, we found major differences between the CHO-DG44 and CHO-K1 lineages in the expression of sialyl transferases and enzymes synthesizing sialic acid precursors, providing a rationale for the lack of immunogenic NeuGc/NGNA synthesis in CHO. Our study highlights the value of systems biotechnology to understand glycoprotein synthesis and product glycoprofiles. Such data improve future production clone selection and process development strategies for better steering of biotherapeutic product quality. Copyright © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

High efficiency cell-recycle continuous sodium gluconate production by Aspergillus niger using on-line physiological parameters association analysis to regulate feed rate rationally.

Science.gov (United States)

Lu, Fei; Li, Chao; Wang, Zejian; Zhao, Wei; Chu, Ju; Zhuang, Yingping; Zhang, Siliang

2016-11-01

In this paper, a system of cell-recycle continuous fermentation for sodium gluconate (SG) production by Aspergillus niger (A. niger) was established. Based on initial continuous fermentation result (100.0h) with constant feed rate, an automatic feedback strategy to regulate feed rate using on-line physiological parameters (OUR and DO) was proposed and applied successfully for the first time in the improved continuous fermentation (240.5h). Due to less auxiliary time, highest SG production rate (31.05±0.29gL(-1)h(-1)) and highest yield (0.984±0.067molmol(-1)), overall SG production capacity (975.8±5.8gh(-1)) in 50-L fermentor of improved continuous fermentation increased more than 300.0% compared to that of batch fermentation. Improvement of mass transfer and dispersed mycelia morphology were the two major reasons responsible for the high SG production rate. This system had been successfully applied to industrial fermentation and SG production was greatly improved. Copyright © 2016 Elsevier Ltd. All rights reserved.

Thermodynamic analysis of an industrial dryer in a ceramic production: an application

Energy Technology Data Exchange (ETDEWEB)

Utlu, Zafer [Mechanical Engineering Department, Faculty of Engineering and Architecture, Istanbul Aydin University (Turkey)], E-mail: zaferutlu@aydin.edu.tr, email: zafer_utlu@yahoo.com; Hepbasli, Arif [Department of Mechanical Engineering, College of Engineering, King Saud University (Saudi Arabia)], email: ahepbasli.c@ksu.edu.sa, email: arifhepbasli@gmail.com

2011-07-01

The drying industry always aims to reduce the amount of moisture from production and to reach this goal using the minimum amount of energy and at minimum cost. The purpose of this paper is to give the energy and exergy analysis of a ceramic plant and to determine the energy and exergy utilization efficiencies of this plant's drying process. Exergy analysis has been widely used for various thermal systems and drying is a significant element of these systems and is an energy intensive operation. In this study, the exergy analysis method was applied to a drying system on a ceramic production line. This process was divided into three stages with the aim of calculating the values for exergy destruction and efficiency of the system in reference (dead state) temperature. Mass, elemental, and heat losses were also studied by means of the actual plant operational data and conclusions were drawn from this that are listed in this paper.

On-Line Synthesis and Analysis by Mass Spectrometry

Science.gov (United States)

Bain, Ryan M.; Pulliam, Christopher J.; Raab, Shannon A.; Cooks, R. Graham

2015-01-01

In this laboratory experiment, students learn how to use ESI to accelerate chemical synthesis and to couple it with on-line mass spectrometry for structural analysis. The Hantzsch synthesis of symmetric 1,4-dihydropyridines is a classic example of a one-pot reaction in which multiple intermediates can serve to indicate the progress of the reaction…

40 CFR 1045.320 - What happens if one of my production-line engines fails to meet emission standards?

Science.gov (United States)

2010-07-01

...-line engines fails to meet emission standards? 1045.320 Section 1045.320 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM SPARK-IGNITION PROPULSION MARINE ENGINES AND VESSELS Testing Production-line Engines § 1045.320 What happens if one of my...

Exponentiation for products of Wilson lines within the generating function approach

International Nuclear Information System (INIS)

Vladimirov, A.A.

2015-01-01

We present the generating function approach to the perturbative exponentiation of correlators of a product of Wilson lines and loops. The exponentiated expression is presented in closed form as an algebraic function of correlators of known operators, which can be seen as a generating function for web diagrams. The expression is naturally split onto two parts: the exponentiation kernel, which accumulates all non-trivial information about web diagrams, and the defect of exponentiation, which reconstructs the matrix exponent and is a function of the exponentiation kernel. The detailed comparison of the presented approach with existing approaches to exponentiation is presented as well. We also give examples of calculations within the generating function exponentiation, namely, we consider different configurations of light-like Wilson lines in the multi-gluon-exchange-webs (MGEW) approximation. Within this approximation the corresponding correlators can be calculated exactly at any order of perturbative expansion by only algebraic manipulations. The MGEW approximation shows violation of the dipole formula for infrared singularities at three-loop order.

General description and production lines of the Egyptian fuel manufacturing pilot plant

International Nuclear Information System (INIS)

Zidan, W.I.; Elseaidy, I.M.

1999-01-01

The Egyptian Fuel Manufacturing Pilot Plant, FMPP, is a new facility, producing an MTR-type fuel elements required for the Egyptian Second Research Reactor, ETRR-2, as well as other plates or elements for an external clients with the same type and enrichment percent or lower, (LEU). General description is presented. The production lines in FMPP, which begin from uranium hexaflouride (UF 6 , 19.7±0.2 % U 235 by wt), aluminum powder, and nuclear grade 6061 aluminium alloy in sheets, bars, and rods with the different heat treatments and dimensions as a raw materials, are processed through a series of the manufacturing, inspection, and quality control plan to produce the final specified MTR-type fuel elements. All these processes and the product control in each step are presented. The specifications of the final product are presented. (author)

The Effects of Pre-Task, On-Line, and Both Pre-Task and On-Line Planning on Fluency, Complexity, and Accuracy--The Case of Iranian EFL Learners' Written Production

Science.gov (United States)

Piri, Faramarz; Barati, Hossein; Ketabi, Saeed

2012-01-01

Previous studies on the effect of planning on language production have revealed that planning does have a positive effect on language performance in terms of fluency, complexity, and accuracy. The present study was an attempt to investigate the effects of pre-task, on-line, and both pre-task and on-line planning on fluency, accuracy, and…

On-line Professional Learning Communities: Increasing Teacher Learning and Productivity in Isolated Rural Communities

Directory of Open Access Journals (Sweden)

Dora Salazar

2010-08-01

Full Text Available On-line and distance professional learning communities provides teachers with increased access and flexibility as well as the combination of work and education. It also provides a more learner-centered approach, enrichment and new ways of interacting with teachers in isolated rural areas. For educational administrators, on-line learning offers high quality and usually cost-effective professional development for teachers. It allows upgrading of skills, increased productivity and development of a new learning culture. At the same time, it means sharing of costs, of training time, increased portability of training, and the exchange of creativity, information, and dialogue.

Automatic yield-line analysis of slabs using discontinuity layout optimization.

Science.gov (United States)

Gilbert, Matthew; He, Linwei; Smith, Colin C; Le, Canh V

2014-08-08

The yield-line method of analysis is a long established and extremely effective means of estimating the maximum load sustainable by a slab or plate. However, although numerous attempts to automate the process of directly identifying the critical pattern of yield-lines have been made over the past few decades, to date none has proved capable of reliably analysing slabs of arbitrary geometry. Here, it is demonstrated that the discontinuity layout optimization (DLO) procedure can successfully be applied to such problems. The procedure involves discretization of the problem using nodes inter-connected by potential yield-line discontinuities, with the critical layout of these then identified using linear programming. The procedure is applied to various benchmark problems, demonstrating that highly accurate solutions can be obtained, and showing that DLO provides a truly systematic means of directly and reliably automatically identifying yield-line patterns. Finally, since the critical yield-line patterns for many problems are found to be quite complex in form, a means of automatically simplifying these is presented.

Cluster Analysis of Maize Inbred Lines

Directory of Open Access Journals (Sweden)

Jiban Shrestha

2016-12-01

Full Text Available The determination of diversity among inbred lines is important for heterosis breeding. Sixty maize inbred lines were evaluated for their eight agro morphological traits during winter season of 2011 to analyze their genetic diversity. Clustering was done by average linkage method. The inbred lines were grouped into six clusters. Inbred lines grouped into Clusters II had taller plants with maximum number of leaves. The cluster III was characterized with shorter plants with minimum number of leaves. The inbred lines categorized into cluster V had early flowering whereas the group into cluster VI had late flowering time. The inbred lines grouped into the cluster III were characterized by higher value of anthesis silking interval (ASI and those of cluster VI had lower value of ASI. These results showed that the inbred lines having widely divergent clusters can be utilized in hybrid breeding programme.

Metabolic flux analysis of the hydrogen production potential in Synechocystis sp. PCC6803

Energy Technology Data Exchange (ETDEWEB)

Navarro, E. [Departamento de Lenguajes y Ciencias de la Computacion, Campus de Teatrinos, Universidad de Malaga, 29071 Malaga (Spain); Montagud, A.; Fernandez de Cordoba, P.; Urchueguia, J.F. [Instituto Universitario de Matematica Pura y Aplicada, Universidad Politecnica de Valencia, Camino de Vera 14, 46022 Valencia (Spain)

2009-11-15

Hydrogen is a promising energy vector; however, finding methods to produce it from renewable sources is essential to allow its wide-scale use. In that line, biological hydrogen production, although it is considered as a possible alternative, requires substantial improvements to overcome its present low yields. In that direction, genetic manipulation probably will play a central role and from that point of view metabolic flux analysis (MFA) constitutes an important tool to guide a priori most suitable genetic modifications oriented to a hydrogen yield increase. In this work MFA has been applied to analyze hydrogen photoproduction of Synechocystis sp. PCC6803. Flux analysis was carried out based on literature data and several basic fluxes were estimated in different growing conditions of the system. From this analysis, an upper limit for hydrogen photoproduction has been determined indicating a wide margin for improvement. MFA was also used to find a feasible operating space for hydrogen production, which avoids oxygen inhibition, one of the most important limitations to make hydrogen production cost effective. In addition, a set of biotechnological strategies are proposed that would be consistent with the performed mathematical analysis. (author)

Simulation of Assembly Line Balancing in Automotive Component Manufacturing

Science.gov (United States)

Jamil, Muthanna; Mohd Razali, Noraini

2016-02-01

This study focuses on the simulation of assembly line balancing in an automotive component in a vendor manufacturing company. A mixed-model assembly line of charcoal canister product that is used in an engine system as fuel's vapour filter was observed and found that the current production rate of the line does not achieve customer demand even though the company practices buffer stock for two days in advance. This study was carried out by performing detailed process flow and time studies along the line. To set up a model of the line by simulation, real data was taken from a factory floor and tested for distribution fit. The data gathered was then transformed into a simulation model. After verification of the model by comparing it with the actual system, it was found that the current line efficiency is not at its optimum condition due to blockage and idle time. Various what-if analysis were applied to eliminate the cause. Proposed layout shows that the line is balanced by adding buffer to avoid the blockage. Whereas, manpower is added the stations to reduce process time therefore reducing idling time. The simulation study was carried out using ProModel software.

Lightweight Methods for Effective Verification of Software Product Lines with Off-the-Shelf Tools

DEFF Research Database (Denmark)

Iosif-Lazar, Alexandru Florin

Certification is the process of assessing the quality of a product and whether it meets a set of requirements and adheres to functional and safety standards. I is often legally required to provide guarantee for human safety and to make the product available on the market. The certification process...... relies on objective evidence of quality, which is produced by using qualified and state-of-the-art tools and verification and validation techniques. Software product line (SPL) engineering distributes costs among similar products that are developed simultaneously. However, SPL certification faces major...... SPL reengineering projects that involve complex source code transformations. To facilitate product (re)certification, the transformation must preserve certain qualitative properties such as code structure and semantics—a difficult task due to the complexity of the transformation and because certain...

Transmission line undergrounding : rate impact investigation and analysis

International Nuclear Information System (INIS)

2004-01-01

In response to concerns expressed by the residents of Markham, Ontario regarding the possible environmental and health impacts of a proposed 230 kV overhead transmission line, Hydro One Networks Inc. (HONI) has proposed to place the line underground as an alternative. This analysis was prepared to evaluate the potential impacts on transmission rates and consumer prices related to changes in the level of underground construction of transmission lines by HONI, as opposed to overhead construction. The report presents the approach to data collection; cost estimates and projections; the modeling and projecting of HONI's regulated rate base and revenue requirement on a basis that reflects the manner in which its future transmission rates are expected to be established; estimates of the incremental cost of undergrounding reflecting a range of reasonable assumptions; and a comparison of the resulting transmission costs and total customer bill. To address the issue of potential demand in other municipalities for additional undergrounding, the study also examined the cumulative effects of ten years' incremental undergrounding costs (i.e. effects on 2014 rates). It was concluded that if HONI were to implement an undergrounding program beginning in 2005, resulting in the installation of 80 km of underground lines by 2014, and shared costs by all users of HONI's system through the network transmission charges, the 2014 transmission rates would be higher. 5 tabs

Establishment of a maintenance plan based on quantitative analysis in the context of RCM in a JIT production scenario

International Nuclear Information System (INIS)

Alebrant Mendes, Angélica; Duarte Ribeiro, José Luis

2014-01-01

This paper presents a quantitative method for supporting the preparation or review of an equipment maintenance plan in a Just-in-time production scenario. The proposed method includes the following steps: (i) identifying the parts that influence reliability; (ii) surveying the failure rates and times to repair the parts; (iii) classification of parts according to the effect of their failures; (iv) surveying the line occupation parameters; (v) identifying the probability distributions for time to failure, time to repair, and line occupation; (vi) simulating the production and maintenance using the Monte Carlo approach; (vii) conducting a sensitivity analysis concerning variations in demand, MTTF, and MTTR; and (viii) establishing optimized intervals for preventive maintenance. The method is illustrated through an application in a labeling and filling gallons line at a paints and dyes production company. This method allowed the identification of critical parts as it relates to the productive scenario in question. The results can support companies in their decision making regarding the need and/or type of maintenance investment that would best fit an expected demand scenario

COMPARISON AND INTERACTION GENOTIPE-ENVIRONMENT OF THE PRODUCTIVE PERFORMANCE IN THREE GENETIC LINES OF TILAPIA Oreochromis sp.

Directory of Open Access Journals (Sweden)

Jorge Luis Pérez-Fuentes

2016-05-01

Full Text Available Tilapia is the second most widely cultivated species in the international scope, due to their fast growing and breeding capacity in captivity. Its biggest problem is the unpredictability of the productive performance of varieties in different environments and management types. For this reason, the productive performance of three lines: Oreochromis niloticus (N, red Oreochromis mossambicus (M and Rocky Mountain (R, cultured in five sites in two environments (Presses: Miguel de la Madrid and Miguel Aleman in the State of Oaxaca, Mexico was compared. Cages with dimensions between 18 and 48 m3 with stocking density of 7 to 28 fish m-3 were used. Feeding varied depending on the producers (1 to 3 portions a day/cage (300 to 1200 g of feed. Total length (TL, weight (P, survival (SUP and fillet yield (RF were evaluated in each genetic line. Results from physicochemical parameters of water, environments of culture and production efficiency of the strains indicated no significant differences, except for weight gain (g between sites of culture. However, it was considered that the differences were mainly due to handling during the culture, rather than the genetic line. Genetic lines showed similar performance (Tilapia R: LT 16.5 ± 3.1 cm, P 99.0± 46.6 g, 28 % RF, SUP 91.6 %. Tilapia N: LT 16.7 ± 3.7 cm, P 98.2 ± 40.9, RF 23 % SUP 86 %. Tilapia M: LT 15.4 ± 4.6 cm, P 100.1 ± 112.5 g, 30 % RF, SUP 91.6 %. Under the conditions evaluated, type of management could influence the efficiency of the culture more than the genetic line.

Transmission line theory for long plasma production by radio frequency discharges between parallel-plate electrodes

International Nuclear Information System (INIS)

Nonaka, S.

1991-01-01

In order to seek for a radio frequency (RF) eigen-mode of waves in producing a plasma between a pair of long dielectric-covered parallel-plate RF electrodes, this paper analyzed all normal modes propagating along the electrodes by solving Maxwell's equations. The result showed that only an odd surface wave mode will produce the plasma in usual experimental conditions, which will become a basic transmission line theory when use of such long electrodes for on-line mass-production of amorphous silicon solar cells

Combination Effects of (TriAzole Fungicides on Hormone Production and Xenobiotic Metabolism in a Human Placental Cell Line

Directory of Open Access Journals (Sweden)

Svenja Rieke

2014-09-01

Full Text Available Consumers are exposed to multiple residues of different pesticides via the diet. Therefore, EU legislation for pesticides requires the evaluation of single active substances as well as the consideration of combination effects. Hence the analysis of combined effects of substances in a broad dose range represents a key challenge to current experimental and regulatory toxicology. Here we report evidence for additive effects for (triazole fungicides, a widely used group of antifungal agents, in the human placental cell line Jeg-3. In addition to the triazoles cyproconazole, epoxiconazole, flusilazole and tebuconazole and the azole fungicide prochloraz also pesticides from other chemical classes assumed to act via different modes of action (i.e., the organophosphate chlorpyrifos and the triazinylsulfonylurea herbicide triflusulfuron-methyl were investigated. Endpoints analysed include synthesis of steroid hormone production (progesterone and estradiol and gene expression of steroidogenic and non-steroidogenic cytochrome-P-450 (CYP enzymes. For the triazoles and prochloraz, a dose dependent inhibition of progesterone production was observed and additive effects could be confirmed for several combinations of these substances in vitro. The non-triazoles chlorpyrifos and triflusulfuron-methyl did not affect this endpoint and, in line with this finding, no additivity was observed when these substances were applied in mixtures with prochloraz. While prochloraz slightly increased aromatase expression and estradiol production and triflusulfuron-methyl decreased estradiol production, none of the other substances had effects on the expression levels of steroidogenic CYP-enzymes in Jeg-3 cells. For some triazoles, prochloraz and chlorpyrifos a significant induction of CYP1A1 mRNA expression and potential combination effects for this endpoint were observed. Inhibition of CYP1A1 mRNA induction by the AhR inhibitor CH223191 indicated AhR receptor dependence this

Modes in Component Behavior Specification via EBP and their Application in Product Lines

Czech Academy of Sciences Publication Activity Database

Kofroň, Jan; Plášil, František; Šerý, O.

2009-01-01

Roč. 51, č. 1 (2009), s. 31-41 ISSN 0950-5849 R&D Projects: GA AV ČR 1ET400300504 Grant - others:GA ČR(CZ) GA201/08/0266 Institutional research plan: CEZ:AV0Z10300504 Keywords : behavior specification * component modes * software product lines Subject RIV: JC - Computer Hardware ; Software Impact factor: 1.821, year: 2009

Transient analysis of printed lines using finite-difference time-domain method

Energy Technology Data Exchange (ETDEWEB)

Ahmed, Shahid [Thomas Jefferson National Accelerator Facility, 12050 Jefferson Avenue, Suite 704, Newport News, VA, 23606, USA

2012-03-29

Comprehensive studies of ultra-wideband pulses and electromagnetic coupling on printed coupled lines have been performed using full-wave 3D finite-difference time-domain analysis. Effects of unequal phase velocities of coupled modes, coupling between line traces, and the frequency dispersion on the waveform fidelity and crosstalk have been investigated in detail. To discriminate the contributions of different mechanisms into pulse evolution, single and coupled microstrip lines without (ϵ_r = 1) and with (ϵ_r > 1) dielectric substrates have been examined. To consistently compare the performance of the coupled lines with substrates of different permittivities and transients of different characteristic times, a generic metric similar to the electrical wavelength has been introduced. The features of pulse propagation on coupled lines with layered and pedestal substrates and on the irregular traces have been explored. Finally, physical interpretations of the simulation results are discussed in the paper.

Project development and commercialisation of on-line analysis systems

International Nuclear Information System (INIS)

Watt, J.S.

2000-01-01

A project team first in the Australian Atomic Energy Commission (AAEC) and since 1982 in CSIRO has developed many on-line analysis systems for the mineral and energy industries. The development of these projects, usually lasting 7-10 years, has followed a common pattern of laboratory R and D, field trials, commercialisation and technology transfer. This successful pattern is illustrated using examples of the development of systems for the on-line analysis of mineral slurries, for determination of the ash content of coal on conveyors, and for determination of the flow rates of oil, water and gas in pipelines. The first two systems, licensed to Australian companies, are used world-wide. They are now the market leaders for radioisotope gauges in their application field. The third, the multiphase flow meter, was licensed in 1997 to an international company. This meter has even greater potential than the other two systems for economic benefit from its use and for numbers of installations. (author)

Cytokines Expression and Nitric Oxide Production under Induced Infection to Typhimurium in Chicken Lines Divergently Selected for Cutaneous Hypersensitivity

Directory of Open Access Journals (Sweden)

Rani Singh

2012-07-01

Full Text Available In the present study, the impact of Salmonella Typhimurium on cell-mediated immunity (CMI was investigated in 5 week-old immuno divergent broiler lines selected for the high and low response to phytohemagglutinin-P. The immune response was assessed in peripheral-blood mononuclear cells (PBMCs induced with Salmonella Typhimurium at different time intervals (0 h, 0.5 h, 2 h, 4 h, 6 h, 12 h and 24 h. The differential mRNA expression patterns of IFN-γ, IL-2 and iNOS were evaluated by quantitative real time PCR. In-vitro production of nitric oxide (NO was also estimated in the culture supernatant and correlated with iNOS mRNA expression. Present study showed higher production of NO in the high cell-mediated line (HCMI as compared to the low cell-mediated line (LCMI upon stimulation with Salmonella Typhimurium. Correspondingly, higher mRNA expression of iNOS and IFN-γ were observed in high response birds (HCMI; but IL-2 was down regulated in this line compared to the low response birds (LCMI. Significantly (p<0.05 higher expression of iNOS, IFN-γ and higher production of NO in high line indicated that the selection for PHA-P response might be employed for increasing the immune competence against Salmonella Typhimurium in chicken flocks.

Integration of a hydraulic production plant in a weak power system on a long radial line

Energy Technology Data Exchange (ETDEWEB)

Lariviere, P. [Hydro-Quebec TransEnergie, 5655 de Marseille, Montreal, Quebec (Canada); Racine, M. [Hydro-Quebec TransEnergie, C.P. 10 000, Montreal, Quebec (Canada)

2009-03-15

Integrating power plants on long lines and weak power systems requires some care. To this effect, a study was conducted to determine if severe disturbances could result when a hydraulic production plant is integrated along a very long radial transmission line. Frequency responses were evaluated to identify possible resonant system operating conditions. Many events such as faults, transformer energyzing and line opening were investigated. All power plant synchronous machines were represented including exciter and governor regulators. Impact of dynamic modeling of the load was examined. The study demonstrates that the overall protective strategy implemented will limit worst overvoltage constraints imposed to equipment and load within an acceptable level. (author)

Evaluation of the influence of dominance rules for the assembly line design problem under consideration of product design alternatives

Science.gov (United States)

Oesterle, Jonathan; Lionel, Amodeo

2018-06-01

The current competitive situation increases the importance of realistically estimating product costs during the early phases of product and assembly line planning projects. In this article, several multi-objective algorithms using difference dominance rules are proposed to solve the problem associated with the selection of the most effective combination of product and assembly lines. The list of developed algorithms includes variants of ant colony algorithms, evolutionary algorithms and imperialist competitive algorithms. The performance of each algorithm and dominance rule is analysed by five multi-objective quality indicators and fifty problem instances. The algorithms and dominance rules are ranked using a non-parametric statistical test.

A temperature-controlled photoelectrochemical cell for quantitative product analysis

Science.gov (United States)

Corson, Elizabeth R.; Creel, Erin B.; Kim, Youngsang; Urban, Jeffrey J.; Kostecki, Robert; McCloskey, Bryan D.

2018-05-01

In this study, we describe the design and operation of a temperature-controlled photoelectrochemical cell for analysis of gaseous and liquid products formed at an illuminated working electrode. This cell is specifically designed to quantitatively analyze photoelectrochemical processes that yield multiple gas and liquid products at low current densities and exhibit limiting reactant concentrations that prevent these processes from being studied in traditional single chamber electrolytic cells. The geometry of the cell presented in this paper enables front-illumination of the photoelectrode and maximizes the electrode surface area to electrolyte volume ratio to increase liquid product concentration and hence enhances ex situ spectroscopic sensitivity toward them. Gas is bubbled through the electrolyte in the working electrode chamber during operation to maintain a saturated reactant concentration and to continuously mix the electrolyte. Gaseous products are detected by an in-line gas chromatograph, and liquid products are analyzed ex situ by nuclear magnetic resonance. Cell performance was validated by examining carbon dioxide reduction on a silver foil electrode, showing comparable results both to those reported in the literature and identical experiments performed in a standard parallel-electrode electrochemical cell. To demonstrate a photoelectrochemical application of the cell, CO2 reduction experiments were carried out on a plasmonic nanostructured silver photocathode and showed different product distributions under dark and illuminated conditions.

Development of a plug-in for Variability Modeling in Software Product Lines

Directory of Open Access Journals (Sweden)

María Lucía López-Araujo

2012-03-01

Full Text Available Las Líneas de Productos de Software (LPS toman ventaja económica de las similitudes y variación entre un conjunto de sistemas de software dentro de un dominio específico. La Ingeniería de Líneas de Productos de Software por lo tanto, define una serie de procesos para el desarrollo de LPS que consideran las similitudes y variación a lo largo del ciclo devida. El modelado de variabilidad, en consecuencia, es una actividad esencial en un enfoque de Ingeniería de Líneas de Productos de Software. Existen varias técnicas para modelado de variabilidad. Entre ellas resalta COVAMOF que permite modelar los puntos de variación, variantes y dependencias como entidades de primera clase, proporcionando una manera uniforme de representarlos en los diversos niveles de abstracción de una LPS. Para poder aprovechar los beneficios de COVAMOF es necesario contar con una herramienta, de otra manera el modelado y la administración de la variabilidad pueden resultar una labor ardua para el ingeniero de software. Este trabajo presenta el desarrollo de un plug-in de COVAMOF para Eclipse.Software Product Lines (SPL take economic advantage of commonality and variability among a set of software systems that exist within a specific domain. Therefore, Software Product Line Engineering defines a series of processes for the development of a SPL that consider commonality and variability during the software life cycle. Variability modeling is therefore an essential activity in a Software Product Line Engineering approach. There are several techniques for variability modeling nowadays. COVAMOF stands out among them since it allows the modeling of variation points, variants and dependencies as first class elements. COVAMOF, therefore, provides an uniform manner for representing such concepts in different levels of abstraction within a SPL. In order to take advantage of COVAMOF benefits, it is necessary to have a computer aided tool, otherwise variability modeling and

The LINEs and SINEs of Entamoeba histolytica: comparative analysis and genomic distribution.

Science.gov (United States)

Bakre, Abhijeet A; Rawal, Kamal; Ramaswamy, Ram; Bhattacharya, Alok; Bhattacharya, Sudha

2005-07-01

Autonomous non-long terminal repeat retrotransposons are commonly referred to as long interspersed elements (LINEs). Short non-autonomous elements that borrow the LINE machinery are called SINES. The Entamoeba histolytica genome contains three classes of LINEs and SINEs. Together the EhLINEs/SINEs account for about 6% of the genome. The recognizable functional domains in all three EhLINEs included reverse transcriptase and endonuclease. A novel feature was the presence of two types of members-some with a single long ORF (less frequent) and some with two ORFs (more frequent) in both EhLINE1 and 2. The two ORFs were generated by conserved changes leading to stop codon. Computational analysis of the immediate flanking sequences for each element showed that they inserted in AT-rich sequences, with a preponderance of Ts in the upstream site. The elements were very frequently located close to protein-coding genes and other EhLINEs/SINEs. The possible influence of these elements on expression of neighboring genes needs to be determined.

On-Line Booking Policies and Competitive Analysis of Medical Examination in Hospital

Directory of Open Access Journals (Sweden)

Li Luo

2014-01-01

Full Text Available From the on-line point, we consider the hospital’s medical examination appointment problem with hierarchical machines. This approach eliminates the need for both demand forecasts and a risk-neutrality assumption. Due to different unit revenue, uncertain demand, and arrival of patients, we design on-line booking policies for two kinds of different situations from the perspective of on-line policy and competitive analysis. After that, we prove the optimal competitive ratios. Through numerical examples, we compare advantages and disadvantages between on-line policies and traditional policies, finding that there is different superiority for these two policies under different arrival sequences.

Balancing Disassembly Line in Product Recovery to Promote the Coordinated Development of Economy and Environment

Directory of Open Access Journals (Sweden)

Jia Liu

2017-02-01

Full Text Available For environmentally conscious and sustainable manufacturing, many more manufacturers are acting to recycle and remanufacture their post-consumed products. The most critical process of remanufacturing is disassembly, since it allows for the selective extraction of the valuable components and materials from returned products to reduce the waste disposal volume. It is, therefore, important to design and balance the disassembly line to work efficiently due to its vital role in effective resource usage and environmental protection. Considering the disassembly precedence relationships and sequence-dependent parts removal time increments, this paper presents an improved discrete artificial bee colony algorithm (DABC for solving the sequence-dependent disassembly line balancing problem (SDDLBP. The performance of the proposed algorithm was tested against nine other approaches. Computational results evidently indicate the superior efficiency of the proposed algorithm for addressing the environmental and economic concerns while optimizing the multi-objective SDDLBP.

Comparison of growth performance and immune parameters of three commercial chicken lines used in organic production.

Science.gov (United States)

Kjærup, R B; Juul-Madsen, H R; Norup, L R; Sørensen, P; Dalgaard, T S

2017-05-01

Owing to the higher demands for avoiding medication and antibiotics, health status of the production animals plays an important role in the poultry industry, especially in organic poultry systems. Immunity plays a major role in keeping the host free from disease, and it is evident that the host's genetic make-up influences immunity and disease resistance/susceptibility in chickens. Previously, breeding strategies aimed at selection for resistance against specific diseases with the risk of creating less disease resistance against other pathogens. Changing breeding strategies towards selection of chickens with a more general and broad disease resistance or robustness may therefore improve the overall health status, animal welfare, and food security in the poultry production. The aim of this study was therefore to compare the immunocompetence of the presumed "robust" Hellevad chickens with two chicken lines widely used in organic production, Bovans Brown (Bovans) and Hisex White (Hisex). The chickens were subjected to a routine vaccination program comprising one parasite and four viral vaccines. The current study indicates that considerable differences in immunocompetence may exist between commercial layer lines used in organic production. The Hellevad chickens were found to have higher body weight at the end of the experiment (17 weeks of age) than the other two lines. Furthermore, Hellevad and Hisex chickens were found to have higher levels of humoral innate immunity with regard to sample to positive ratio of natural antibodies in serum and concentration of mannose-binding lectin in serum as compared to Bovans. Moreover, indications of an inflammatory response were observed in the Bovans at week 5, corresponding to 1 week after vaccination with live infectious bursal disease virus. With regard to adaptive immune parameters such as IgY concentration in blood and infectious bursal disease virus (IBDV)-specific antibody titres, the Hellevad and Hisex chickens had lower

Effect of splitting a mixed-model line on shortening the line length under open- and closed-boundary working area settings

Science.gov (United States)

Zhang, Donghao; Matsuura, Haruki; Asada, Akiko

2017-04-01

Some automobile factories have segmented mixed-model production lines into shorter sub-lines according to part group, such as engine, trim, and powertrain. The effects of splitting a line into sub-lines have been reported from the standpoints of worker motivation, productivity improvement, and autonomy based on risk spreading. There has been no mention of the possibility of shortening the line length by altering the product sequence using sub-lines. The purpose of the present paper is to determine the conditions under which sub-lines reduce the line length and the degree to which the line length may be shortened. The line lengths for a non-split line and a line that has been split into sub-lines are compared using three methods for determining the working area, the standard closed boundary, the optimized open boundary, and real-life constant-length stations. The results are discussed by analyzing the upper and lower bounds of the line length. Based on these results, a procedure for deciding whether or not to split a production line is proposed.

The series production in a standardized fabrication line for silicide fuels and commercial aspects

International Nuclear Information System (INIS)

Wehner, E.L.; Hassel, H.W.

1987-01-01

NUKEM has been responsible for the development and fabrication of LEU fuel elements for MTR reactors under the frame of the German AF program since 1979. The AF program is part of the international RERTR efforts, which were initiated by the INFCE Group in 1978. This paper describes the actual status of development and the transition from the prototype to the series production in a standardized manufacturing line for silicide fuels at NUKEM. Technical provisions and a customer oriented standardized product range aim at an economized manufacturing. (Author)

Product Context Analysis with Twitter Data

OpenAIRE

Sun, Tao

2016-01-01

Context. For the product manager, the product context analysis, which aims to align their products to the market needs, is very important. By understanding the market needs, the product manager knows the product context information about the environment the products conceived and the business the products take place. The product context analysis using the product context information helps the product manager find the accurate position of his/her products and support the decision-making of the...

Temperature-dependence of Threshold Current Density-Length Product in Metallization Lines: A Revisit

International Nuclear Information System (INIS)

Duryat, Rahmat Saptono; Kim, Choong-Un

2016-01-01

One of the important phenomena in Electromigration (EM) is Blech Effect. The existence of Threshold Current Density-Length Product or EM Threshold has such fundamental and technological consequences in the design, manufacture, and testing of electronics. Temperature-dependence of Blech Product had been thermodynamically established and the real behavior of such interconnect materials have been extensively studied. The present paper reviewed the temperature-dependence of EM threshold in metallization lines of different materials and structure as found in relevant published articles. It is expected that the reader can see a big picture from the compiled data, which might be overlooked when it was examined in pieces. (paper)

Estratégia de produção em empresas com linhas de produtos diferenciadas: um estudo de caso em uma empresa rodoferroviária Production strategy of companies with differentiated products lines: case study of a road and railway equipment company

Directory of Open Access Journals (Sweden)

Marcelo Klippel

2005-12-01

mercadológicos diferenciados, parece não poder haver uma única estratégia de produção passível de ser adotada homogeneamente em todas as linhas de produtos. Neste sentido, é necessária uma análise conjunta, sistêmica, complementar e inter-relacionada entre os aspectos genéricos da RVO e das competências centrais da empresa e os aspectos específicos ligados a RVO e as competências das linhas específicas de produtos.The Brazilian market is intensely competitive in certain industrial segments but its scale of global production is small compared with that of the USA, Europe and Japan. Though leaders in their respective markets, several companies, including the manufacturers of road and railway equipment for freight transportation, must develop business and production strategies that can compete effectively in an environment characterized by: 1 the manufacture of a wide range of products aimed at ensuring large total production volumes; 2 competition in distinct markets from the standpoint of manufactured product lines; and 3 in many cases, competition from smaller competitors focusing on specific product lines. This paper reports on a study and analysis of issues relating to the production strategy of companies with diversified product lines. The theoretical reference presents concepts of production strategy, based on the method proposed by Hayes et al. (2005, to analyze the corporate production strategy. To enrich the concepts of Hayes et al. (2005, we consider not only the notion of Operation Value Networks (OVNs instead of the classical decision categories but also the concept of core competencies. The notion of OVNs provides a systemic view of value flow that makes it easy to understand the company and the business unit and contributes to the formulation of the company production strategy. The concept of core competencies, in turn, favors the identification of the company's core points that provide greater added value for customers. Pursuant to the

Analysis Of Feedwater Line Break Of APR1400 By MARS Code

International Nuclear Information System (INIS)

Nguyen Thi Thanh Thuy; Le Dai Dien, Hoang Minh Giang

2011-01-01

This paper will deal with analysis of Feed water Line Break problem (FWLB) of the APR 1400 NPP with initial conditions: operation at 100% of power, double-ended break area of 0.058 m 2 and the break location of the feedwater line between the check valve and the steam generator. The analysis was simulated by MARS code through two step: calculation for steady state and calculation for transient state with initial condition mentioned. Some output result were presented with explanation: sequence of events corresponding to the time of the accident, the system behavior as temperature, pressure, steam generator water levels as well as DNBR, etc. before and after the accident. (author)

Analysis of genetic diversity among rapeseed cultivars and breeding lines by srap and ssr molecular markers

International Nuclear Information System (INIS)

Channa, S.A.; Tian, H.

2016-01-01

The knowledge of genetic diversity is very important for developing new rapeseed (Brassica napus L.) cultivars. The genetic diversity among 77 rapeseed accessions, including 22 varieties and 55 advanced breeding lines were analyzed by 47 sequence-related amplified polymorphism (SRAP) and 56 simple sequence repeat (SSR) primers. A total of 270 SRAP and 194 SSR polymorphic fragments were detected with an average of 5.74 and 3.46 for SRAP and SSR primer, respectively. The cluster analysis grouped the 77 accessions into five major clusters. Cluster I contained spring and winter type varieties from Czech Republic and semi-winter varieties and their respective breeding lines from China. The 16 elite breeding lines discovered in Cluster II, III, IV and V indicated higher genetic distance than accessions in Cluster I. The principal component analysis and structure analysis exhibited similar results to the cluster analysis. Analysis of molecular variance revealed that genetic diversity of the selected breeding lines was comparable to the rapeseed varieties, and variation among varieties and lines was significant. The diverse and unique group of 16 elite breeding lines detected in this study can be utilized in the future breeding program as a source for development of commercial varieties with more desirable characters. (author)

On-line tritium production and heat deposition rate measurements at the Lotus facility

International Nuclear Information System (INIS)

Joneja, O.P.; Scherrer, P.; Anand, R.P.

1994-01-01

Integral tritium production and heat deposition measurement in a prototype fusion blanket would enable verification of the computational codes and the data based employed for the calculations. A large number of tritium production rate measurements have been reported for different type of blankets, whereas the direct heat deposition due to the mixed radiation field in the fusion environment, is still in its infancy. In order to ascertain the kerma factors and the photon production libraries, suitable techniques must be developed to directly measure the nuclear heat deposition rates in the materials required for the fusion systems. In this context, at the Lotus facility, we have developed an extremely efficient double ionizing chamber, for the on-line tritium production measurements and employed a pure graphite calorimeter to measure the nuclear heat deposition due to the mixed radiation field of the 14 MeV, Haefely neutron generator. This paper presents both systems and some of the recent measurements. (authors). 8 refs., 13 figs

Analysis of some coplanar transmission lines: coplanar coupled lines, coplanar coupled striplines, and coplanar coupled lines with rectangular microshield

Science.gov (United States)

Yuan, Naichang; He, Jianguo; Yao, Demiao; Dai, Qin; Lin, Weigan

1995-06-01

Two types of coplanar transmission lines, rectangular microshield coplanar coupled lines (RMCCL) and coplanar coupled rectangular microshield lines (CCRML), are proposed for MMIC applications. These are developed from coplanar coupled lines (CCL) and coplanar coupled strip lines (CCS). Analytic formulas are presented for calculating the quasistatic TEM parameters of these coupled lines by means of exact conformal mapping techniques. Numerical results are also presented to illustrate the properties of these coplanar transmission lines.

Quantitative texture analysis of electrodeposited line patterns

DEFF Research Database (Denmark)

Pantleon, Karen; Somers, Marcel A.J.

2005-01-01

Free-standing line patterns of Cu and Ni were manufactured by electrochemical deposition into lithographically prepared patterns. Electrodeposition was carried out on top of a highly oriented Au-layer physically vapor deposited on glass. Quantitative texture analysis carried out by means of x......-ray diffraction for both the substrate layer and the electrodeposits yielded experimental evidence for epitaxy between Cu and Au. An orientation relation between film and substrate was discussed with respect to various concepts of epitaxy. While the conventional mode of epitaxy fails for the Cu...

Continuous determination of volatile products in anaerobic fermenters by on-line capillary gas chromatography

International Nuclear Information System (INIS)

Diamantis, V.; Melidis, P.; Aivasidis, A.

2006-01-01

Bio-ethanol and biogas produced during the anaerobic conversion of organic compounds has been a subject of great interest since the oil crisis of the 1970s. In ethanol fermentation and anaerobic treatment of wastewaters, end-product (ethanol) and intermediate-products (short-chain fatty acids, SCFA) cause inhibition that results in reduced process efficiency. Control of these constituents is of utmost importance for bioreactor optimization and process stability. Ethanol and SCFA can be detected with precision by capillary gas chromatography usually conducted in off-line measurements. In this work, an on-line monitoring and controlling system was developed and connected to the fermenter via an auto-sampling equipment, which could perform the feeding, filtration and dilution of the sample and final injection into the gas chromatograph through an automation-based programmed procedure. The sample was continuously pumped from the recycle stream of the bioreactor and treated using a microfiltration unit. The concentrate was returned to the reactor while the permeate was quantitatively mixed with an internal standard solution. The system comprised of a gas chromatograph with the flow cell and one-shot sampler and a PC with the appropriate software. The on-line measurement of ethanol and SCFA, directly from the liquid phase of an ethanol fermenter and a high-rate continuous mode anaerobic digester, was accomplished by gas chromatography. Also, this monitoring and controlling system was proved to be effective in the continuous fermentation of alcohol-free beer

Synergy between Software Product Line and Intelligent Pervasive Middleware-a PLIPerM Approach

DEFF Research Database (Denmark)

Zhang, Weishan

2008-01-01

with OWL ontology reasoning enhanced BDI (Belief-Desire-Intention) agents, which are the basic building blocks of PLIPerM. Besides the advantages of a software product line, our approachcan handle ontology evolution and keep all related assets in a consistent state. Other advantages include the ability...... to configure Jadex BDI agents for different purpose and to enhance agent intelligence by adding logic reasoning capabilities indirectly to agent beliefs....

Optimization of line configuration and balancing for flexible machining lines

Science.gov (United States)

Liu, Xuemei; Li, Aiping; Chen, Zurui

2016-05-01

Line configuration and balancing is to select the type of line and allot a given set of operations as well as machines to a sequence of workstations to realize high-efficiency production. Most of the current researches for machining line configuration and balancing problems are related to dedicated transfer lines with dedicated machine workstations. With growing trends towards great product variety and fluctuations in market demand, dedicated transfer lines are being replaced with flexible machining line composed of identical CNC machines. This paper deals with the line configuration and balancing problem for flexible machining lines. The objective is to assign operations to workstations and find the sequence of execution, specify the number of machines in each workstation while minimizing the line cycle time and total number of machines. This problem is subject to precedence, clustering, accessibility and capacity constraints among the features, operations, setups and workstations. The mathematical model and heuristic algorithm based on feature group strategy and polychromatic sets theory are presented to find an optimal solution. The feature group strategy and polychromatic sets theory are used to establish constraint model. A heuristic operations sequencing and assignment algorithm is given. An industrial case study is carried out, and multiple optimal solutions in different line configurations are obtained. The case studying results show that the solutions with shorter cycle time and higher line balancing rate demonstrate the feasibility and effectiveness of the proposed algorithm. This research proposes a heuristic line configuration and balancing algorithm based on feature group strategy and polychromatic sets theory which is able to provide better solutions while achieving an improvement in computing time.

Characteristic analysis of coupled transmission lines in stripline-type beam position monitor

International Nuclear Information System (INIS)

Suwada, T.

2013-01-01

Signal transmission characteristics in stripline electrodes of a stripline-type beam position monitor (BPM) are discussed on the basis of a coupled-mode analysis in electromagnetically coupled transmission lines. The physical prospect in the calibration procedure of stripline electrodes is improved in terms of signal transmission characteristics in the frequency domain. It is demonstrated that in the signal transmission with electromagnetic coupling between the stripline electrodes, the magnetic- and electric-coupling parameters play an important role depending upon the spatial configuration and mechanical structure of the stripline electrodes. In this report, a theoretical analysis, and experimental investigation into signal transmission characteristics and performance in a standard stripline-type BPM are described in detail on the basis of a coupled-mode analysis in uniform transmission lines

Reactors Dynamic analysis Due to Reactivity of The RSG-Gas at One Line Cooling Mode

International Nuclear Information System (INIS)

Hastuti, Endiah Puji

2003-01-01

In the frame of minimizing the operation-cost, operation mode using one line cooling system is being evaluated. Maximum reactor power has been determined and steady state and LOFA transient analysis have also been done. To complete those analyses, the reactivity analysis was done by means of a core dynamic and thermal hydraulic code, PARET-ANL. Accident simulation was done. by a ramp reactivity accident due to control rod withdrawal. Reactivity analysis was carried out at two power range i.e. low and high power level, by imposing one line mode reactor protection limits. The results show that technically, the RSG-Gas can be operated safely using one line mode

Improving the performance of a filling line based on simulation

Science.gov (United States)

Jasiulewicz-Kaczmarek, M.; Bartkowiak, T.

2016-08-01

The paper describes the method of improving performance of a filling line based on simulation. This study concerns a production line that is located in a manufacturing centre of a FMCG company. A discrete event simulation model was built using data provided by maintenance data acquisition system. Two types of failures were identified in the system and were approximated using continuous statistical distributions. The model was validated taking into consideration line performance measures. A brief Pareto analysis of line failures was conducted to identify potential areas of improvement. Two improvements scenarios were proposed and tested via simulation. The outcome of the simulations were the bases of financial analysis. NPV and ROI values were calculated taking into account depreciation, profits, losses, current CIT rate and inflation. A validated simulation model can be a useful tool in maintenance decision-making process.

The characteristics of activities of the operator of a management system by the line for release of foodstuff

Directory of Open Access Journals (Sweden)

Al-Hetari H.M. Abdulaziz

2016-01-01

Full Text Available The article presents the analysis of the main stages of professional activity of the operator of a management system by a production line of food products. Studied the question of the serious consequences of human error as the cause of the marriage in the manufacture of food products on automated lines. The nature of the error automated systems operators as a result of the deterioration of psychophysical state of the working person. The importance of modeling the signal generating emergency alarm, can significantly reduce the probability of release of potentially dangerous products. The optimality of the psychophysical state of the control system operator line of food production is highlighted as one of the main criteria for the rational organization of work. The problem of assessing changes in the human condition is also studied, participating in professional activities. The classification of types of functional states control over employee -depending on its purpose. Special attention in work is paid to an example of change of a psychophysical state, expressed in exhaustion of the worker of production. It gives a detailed description of the external signs of exhaustion in the comparative analysis of manual and mental work. The article shows the main tariff and qualification characteristics of activities of operators of lines in production of food products depending on their categories are specified. Describes a group of workers, depending on the operator's activity, indicating the brief description of each group. Based on the analysis of tariff and qualifying characteristics of lines of the operators in the production of food products of different categories, it shows that the range of qualifying categories covers almost al l groups of workers with the exception of the head of the operator. Highlight the desired differentiated approach to the assessment of psychophysiological state operators.

Parallel mRNA, proteomics and miRNA expression analysis in cell line models of the intestine.

Science.gov (United States)

O'Sullivan, Finbarr; Keenan, Joanne; Aherne, Sinead; O'Neill, Fiona; Clarke, Colin; Henry, Michael; Meleady, Paula; Breen, Laura; Barron, Niall; Clynes, Martin; Horgan, Karina; Doolan, Padraig; Murphy, Richard

2017-11-07

To identify miRNA-regulated proteins differentially expressed between Caco2 and HT-29: two principal cell line models of the intestine. Exponentially growing Caco-2 and HT-29 cells were harvested and prepared for mRNA, miRNA and proteomic profiling. mRNA microarray profiling analysis was carried out using the Affymetrix GeneChip Human Gene 1.0 ST array. miRNA microarray profiling analysis was carried out using the Affymetrix Genechip miRNA 3.0 array. Quantitative Label-free LC-MS/MS proteomic analysis was performed using a Dionex Ultimate 3000 RSLCnano system coupled to a hybrid linear ion trap/Orbitrap mass spectrometer. Peptide identities were validated in Proteome Discoverer 2.1 and were subsequently imported into Progenesis QI software for further analysis. Hierarchical cluster analysis for all three parallel datasets (miRNA, proteomics, mRNA) was conducted in the R software environment using the Euclidean distance measure and Ward's clustering algorithm. The prediction of miRNA and oppositely correlated protein/mRNA interactions was performed using TargetScan 6.1. GO biological process, molecular function and cellular component enrichment analysis was carried out for the DE miRNA, protein and mRNA lists via the Pathway Studio 11.3 Web interface using their Mammalian database. Differential expression (DE) profiling comparing the intestinal cell lines HT-29 and Caco-2 identified 1795 Genes, 168 Proteins and 160 miRNAs as DE between the two cell lines. At the gene level, 1084 genes were upregulated and 711 were downregulated in the Caco-2 cell line relative to the HT-29 cell line. At the protein level, 57 proteins were found to be upregulated and 111 downregulated in the Caco-2 cell line relative to the HT-29 cell line. Finally, at the miRNAs level, 104 were upregulated and 56 downregulated in the Caco-2 cell line relative to the HT-29 cell line. Gene ontology (GO) analysis of the DE mRNA identified cell adhesion, migration and ECM organization, cellular lipid

Dynamic analysis and vibration testing of CFRP drive-line system used in heavy-duty machine tool

Science.gov (United States)

Yang, Mo; Gui, Lin; Hu, Yefa; Ding, Guoping; Song, Chunsheng

2018-03-01

Low critical rotary speed and large vibration in the metal drive-line system of heavy-duty machine tool affect the machining precision seriously. Replacing metal drive-line with the CFRP drive-line can effectively solve this problem. Based on the composite laminated theory and the transfer matrix method (TMM), this paper puts forward a modified TMM to analyze dynamic characteristics of CFRP drive-line system. With this modified TMM, the CFRP drive-line of a heavy vertical miller is analyzed. And the finite element modal analysis model of the shafting is established. The results of the modified TMM and finite element analysis (FEA) show that the modified TMM can effectively predict the critical rotary speed of CFRP drive-line. And the critical rotary speed of CFRP drive-line is 20% higher than that of the original metal drive-line. Then, the vibration of the CFRP and the metal drive-line were tested. The test results show that application of the CFRP drive shaft in the drive-line can effectively reduce the vibration of the heavy-duty machine tool.

Human rhabdomyosarcoma cell lines for rhabdomyosarcoma research: Utility and pitfalls

Directory of Open Access Journals (Sweden)

Ashley R.P. Hinson

2013-07-01

Full Text Available Rhabdomyosarcoma (RMS is the most common soft tissue sarcoma of childhood and adolescence. Despite intergroup clinical trials conducted in Europe and North America, outcomes for high risk patients with this disease have not significantly improved in the last several decades, and survival of metastatic or relapsed disease remains extremely poor. Accrual into new clinical trials is slow and difficult, so in vitro cell line research and in vivo xenograft models present an attractive alternative for preclinical research for this cancer type. Currently, 30 commonly used human RMS cell lines exist, with differing origins, karyotypes, histologies, and methods of validation. Selecting an appropriate cell line for RMS research has important implications for outcomes. There are also potential pitfalls in using certain cell lines including contamination with murine stromal cells, cross-contamination between cell lines, discordance between the cell line and its associated original tumor, imposter cell lines, and nomenclature errors that result in the circulation of two or more presumed unique cell lines that are actually from the same origin. These pitfalls can be avoided by testing for species-specific isoenzymes, microarray analysis, assays for subtype-specific fusion products, and short tandem repeat analysis.

Human Rhabdomyosarcoma Cell Lines for Rhabdomyosarcoma Research: Utility and Pitfalls

Science.gov (United States)

Hinson, Ashley R. P.; Jones, Rosanne; Crose, Lisa E. S.; Belyea, Brian C.; Barr, Frederic G.; Linardic, Corinne M.

2013-01-01

Rhabdomyosarcoma (RMS) is the most common soft tissue sarcoma of childhood and adolescence. Despite intergroup clinical trials conducted in Europe and North America, outcomes for high risk patients with this disease have not significantly improved in the last several decades, and survival of metastatic or relapsed disease remains extremely poor. Accrual into new clinical trials is slow and difficult, so in vitro cell-line research and in vivo xenograft models present an attractive alternative for preclinical research for this cancer type. Currently, 30 commonly used human RMS cell lines exist, with differing origins, karyotypes, histologies, and methods of validation. Selecting an appropriate cell line for RMS research has important implications for outcomes. There are also potential pitfalls in using certain cell lines including contamination with murine stromal cells, cross-contamination between cell lines, discordance between the cell line and its associated original tumor, imposter cell lines, and nomenclature errors that result in the circulation of two or more presumed unique cell lines that are actually from the same origin. These pitfalls can be avoided by testing for species-specific isoenzymes, microarray analysis, assays for subtype-specific fusion products, and short tandem repeat analysis. PMID:23882450

Ames S-32 O-16 O-18 Line List for High-Resolution Experimental IR Analysis

Science.gov (United States)

Huang, Xinchuan; Schwenke, David W.; Lee, Timothy J.

2016-01-01

By comparing to the most recent experimental data and spectra of the SO2 628 ?1/?3 bands (see Ulenikov et al., JQSRT 168 (2016) 29-39), this study illustrates the reliability and accuracy of the Ames-296K SO2 line list, which is accurate enough to facilitate such high-resolution spectroscopic analysis. The SO2 628 IR line list is computed on a recently improved potential energy surface (PES) refinement, denoted Ames-Pre2, and the published purely ab initio CCSD(T)/aug-cc-pVQZ dipole moment surface. Progress has been made in both energy level convergence and rovibrational quantum number assignments agreeing with laboratory analysis models. The accuracy of the computed 628 energy levels and line list is similar to what has been achieved and reported for SO2 626 and 646, i.e. 0.01-0.03 cm(exp -1) for bands up to 5500 cm(exp -1). During the comparison, we found some discrepancies in addition to overall good agreements. The three-IR-list based feature-by-feature analysis in a 0.25 cm(exp -1) spectral window clearly demonstrates the power of the current Ames line lists with new assignments, correction of some errors, and intensity contributions from varied sources including other isotopologues. We are inclined to attribute part of detected discrepancies to an incomplete experimental analysis and missing intensity in the model. With complete line position, intensity, and rovibrational quantum numbers determined at 296 K, spectroscopic analysis is significantly facilitated especially for a spectral range exhibiting such an unusually high density of lines. The computed 628 rovibrational levels and line list are accurate enough to provide alternatives for the missing bands or suspicious assignments, as well as helpful to identify these isotopologues in various celestial environments. The next step will be to revisit the SO2 828 and 646 spectral analyses.

The gas-phase on-line production of vanadium oxytrihalides, VOX3 and their identification by infrared spectroscopy

International Nuclear Information System (INIS)

Zidan, M. D.; Allaf, A. W.

2001-01-01

A new route has been devised, leading to the production of VOX 3 molecules where X=F, Br and I by an on-line process using vanadium oxytrichloride, VOCl 3 as a starting compound passed over the following heated salts NaF, KBr and KI at 375, 700 and 550 centigrade, respectively. The products have been characterized by the IR spectra of their vapors. the low resolution gas phase on-line Fourier transform infrared spectra reported for the first time show strong bands with PQR type structure, centered at 1058, 1035, 1030 and 1025 cm -1 to the υ 1 (a 1 ), the O=V stretching fundamental mode of VOF 3 , VOCl 3 , VOBr 3 and VOI 3 , respectively. (Author)

Blast furnace hearth lining: post mortem analysis

International Nuclear Information System (INIS)

Almeida, Bruno Vidal de; Vernilli Junior, Fernando

2017-01-01

The main refractory lining of blast furnace hearth is composed by carbon blocks that operates in continuous contact with hot gases, liquid slag and hot metal, in temperatures above 1550 deg C for 24 hours a day. To fully understand the wear mechanism that acts in this refractory layer system it was performed a Post Mortem study during the last partial repair of this furnace. The samples were collected from different parts of the hearth lining and characterized using the following techniques: Bulk Density and Apparent Porosity, X-Ray Fluorescence, X-ray Diffraction, Scanning Electron Microscopy with Energy-dispersive X-Ray Spectroscopy. The results showed that the carbon blocks located at the opposite side of the blast furnace tap hole kept its main physicochemical characteristics preserved even after the production of 20x10"6 ton of hot metal. However, the carbon blocks around the Tap Hole showed infiltration by hot metal and slag and it presents a severe deposition of zinc and sulfur over its carbon flakes. The presence of these elements is undesired because it reduces the physic-chemical stability of this refractory system. This deposition found in the carbon refractory is associated with impurities present in the both coke and the sinter feed used in this blast furnace in the last few years. (author)

Blast furnace hearth lining: post mortem analysis

Energy Technology Data Exchange (ETDEWEB)

Almeida, Bruno Vidal de; Vernilli Junior, Fernando, E-mail: bva@usp.br [Universidade de Sao Paulo (USP), Lorena, SP (Brazil). Escola de Engenharia; Neves; Elton Silva; Silva, Sidiney Nascimento [Companhia Siderugica Nacional (CSN), Rio de Janeiro, RJ (Brazil)

2017-05-15

The main refractory lining of blast furnace hearth is composed by carbon blocks that operates in continuous contact with hot gases, liquid slag and hot metal, in temperatures above 1550 deg C for 24 hours a day. To fully understand the wear mechanism that acts in this refractory layer system it was performed a Post Mortem study during the last partial repair of this furnace. The samples were collected from different parts of the hearth lining and characterized using the following techniques: Bulk Density and Apparent Porosity, X-Ray Fluorescence, X-ray Diffraction, Scanning Electron Microscopy with Energy-dispersive X-Ray Spectroscopy. The results showed that the carbon blocks located at the opposite side of the blast furnace tap hole kept its main physicochemical characteristics preserved even after the production of 20x10{sup 6} ton of hot metal. However, the carbon blocks around the Tap Hole showed infiltration by hot metal and slag and it presents a severe deposition of zinc and sulfur over its carbon flakes. The presence of these elements is undesired because it reduces the physic-chemical stability of this refractory system. This deposition found in the carbon refractory is associated with impurities present in the both coke and the sinter feed used in this blast furnace in the last few years. (author)

Collider detector beam line test table: a structural analysis

International Nuclear Information System (INIS)

Leininger, M.B.

1983-01-01

The apparatus which sweeps calorimeter and endwall modules through the beam during testing is called a beam line test table. Because of rather stringent requirements for the physical positioning of the modules an analysis is done here to determine the modifications to the current test table design which will minimize deflections of the table under load

Product competitiveness analysis for e-commerce platform of special agricultural products

Science.gov (United States)

Wan, Fucheng; Ma, Ning; Yang, Dongwei; Xiong, Zhangyuan

2017-09-01

On the basis of analyzing the influence factors of the product competitiveness of the e-commerce platform of the special agricultural products and the characteristics of the analytical methods for the competitiveness of the special agricultural products, the price, the sales volume, the postage included service, the store reputation, the popularity, etc. were selected in this paper as the dimensionality for analyzing the competitiveness of the agricultural products, and the principal component factor analysis was taken as the competitiveness analysis method. Specifically, the web crawler was adopted to capture the information of various special agricultural products in the e-commerce platform ---- chi.taobao.com. Then, the original data captured thereby were preprocessed and MYSQL database was adopted to establish the information library for the special agricultural products. Then, the principal component factor analysis method was adopted to establish the analysis model for the competitiveness of the special agricultural products, and SPSS was adopted in the principal component factor analysis process to obtain the competitiveness evaluation factor system (support degree factor, price factor, service factor and evaluation factor) of the special agricultural products. Then, the linear regression method was adopted to establish the competitiveness index equation of the special agricultural products for estimating the competitiveness of the special agricultural products.

Identification and quantification of polycarboxylates in detergent products using off-line size exclusion chromatography-nuclear magnetic resonance

Energy Technology Data Exchange (ETDEWEB)

Visser, Ilona, E-mail: ilona.visser@unilever.com [Unilever Research and Development Vlaardingen, Olivier van Noortlaan 120, PO box 114, 3130 AC Vlaardingen (Netherlands); Klinkenberg, Monique; Hoos, Peter; Janssen, Hans-Gerd; Duynhoven, John van [Unilever Research and Development Vlaardingen, Olivier van Noortlaan 120, PO box 114, 3130 AC Vlaardingen (Netherlands)

2009-11-03

The performance of many contemporary detergent products critically depends on polymers. Water-soluble polycarboxylates represent an important class of detergent polymers, and their quantitative assessment in detergent matrices stands as a considerable challenge. The presence of high levels of surfactants is a major complication, due to the strong tendency of surfactants to form micelles and to interact with the polymers. First, we addressed critical steps in the subsequent combined use of liquid extraction and off-line size exclusion chromatography-nuclear magnetic resonance (SEC-NMR) for identification and quantification of polycarboxylates in detergent products. Next, the different steps in the off-line SEC-NMR procedure were optimized with respect to precision and accuracy. This resulted in recoveries of more than 80% for maleic acid/acrylic acid copolymers; in detergent products a proportional bias of 30% is achieved. The method showed good precision with a relative standard deviation of within-laboratory reproducibility between 5% and 14%.

Identification and quantification of polycarboxylates in detergent products using off-line size exclusion chromatography-nuclear magnetic resonance

International Nuclear Information System (INIS)

Visser, Ilona; Klinkenberg, Monique; Hoos, Peter; Janssen, Hans-Gerd; Duynhoven, John van

2009-01-01

The performance of many contemporary detergent products critically depends on polymers. Water-soluble polycarboxylates represent an important class of detergent polymers, and their quantitative assessment in detergent matrices stands as a considerable challenge. The presence of high levels of surfactants is a major complication, due to the strong tendency of surfactants to form micelles and to interact with the polymers. First, we addressed critical steps in the subsequent combined use of liquid extraction and off-line size exclusion chromatography-nuclear magnetic resonance (SEC-NMR) for identification and quantification of polycarboxylates in detergent products. Next, the different steps in the off-line SEC-NMR procedure were optimized with respect to precision and accuracy. This resulted in recoveries of more than 80% for maleic acid/acrylic acid copolymers; in detergent products a proportional bias of 30% is achieved. The method showed good precision with a relative standard deviation of within-laboratory reproducibility between 5% and 14%.

Sustainable production of azadirachtin from differentiated in vitro cell lines of neem (Azadirachta indica)

Science.gov (United States)

Singh, Mithilesh; Chaturvedi, Rakhi

2013-01-01

Azadirachtin has high industrial demand due to its immediate application as an ecofriendly, biodegradable biopesticide and also due to its various other significant bioactivities. To date, the only commercially feasible way to produce azadirachtin is extraction from seeds, but their availability is very limited as the tree flowers only once a year and only one-third of the fruits are collected due to operational problems. Further, due to the strict out-breeding nature of the plant, the seeds are highly heterozygous, resulting in inconsistent metabolite production. Therefore, in the present study, to achieve sustainable production of azadirachtin, dedifferentiated and redifferentiated calli derived from various explants of neem—zygotic embryo, leaf and ovary—were investigated for their potential to biosynthesize azadirachtin. High-performance liquid chromatography analysis of the in vitro cell lines showed the presence of azadirachtin in all the samples tested, the content of which in cultured cells varied with explant source and cell differentiation response. The presence of azadirachtin in samples was further confirmed by positive electrospray ionization mass spectroscopy. The zygotic embryo cultures of neem accumulated much higher amounts of azadirachtin than leaf and ovary cultures. Furthermore, organized in vitro callus cultures (redifferentiated) supported higher azadirachtin biosynthesis, while unorganized callus cultures (dedifferentiated) supported the least. The maximum azadirachtin content of 2.33 mg g−1 dry weight was obtained from redifferentiated immature zygotic embryo cultures.

Some Results On The Modelling Of TSS Manufacturing Lines

Directory of Open Access Journals (Sweden)

Viorel MÎNZU

2000-12-01

Full Text Available This paper deals with the modelling of a particular class of manufacturing lines, governed by a decentralised control strategy so that they balance themselves. Such lines are known as “bucket brigades” and also as “TSS lines”, after their first implementation, at Toyota, in the 70’s. A first study of their behaviour was based upon modelling as stochastic dynamic systems, which emphasised, in the frame of the so-called “Normative Model”, a sufficient condition for self-balancing, that means for autonomous functioning at a steady production rate (stationary behaviour. Under some particular conditions, a simulation analysis of TSS lines could be made on non-linear block diagrams, showing that the state trajectories are piecewise continuous in between occurrences of certain discrete events, which determine their discontinuity. TSS lines may therefore be modelled as hybrid dynamic systems, more specific, with autonomous switching and autonomous impulses (jumps. A stability analysis of such manufacturing lines is allowed by modelling them as hybrid dynamic systems with discontinuous motions.

Dynamic analysis and vibration testing of CFRP drive-line system used in heavy-duty machine tool

Directory of Open Access Journals (Sweden)

Mo Yang

2018-03-01

Full Text Available Low critical rotary speed and large vibration in the metal drive-line system of heavy-duty machine tool affect the machining precision seriously. Replacing metal drive-line with the CFRP drive-line can effectively solve this problem. Based on the composite laminated theory and the transfer matrix method (TMM, this paper puts forward a modified TMM to analyze dynamic characteristics of CFRP drive-line system. With this modified TMM, the CFRP drive-line of a heavy vertical miller is analyzed. And the finite element modal analysis model of the shafting is established. The results of the modified TMM and finite element analysis (FEA show that the modified TMM can effectively predict the critical rotary speed of CFRP drive-line. And the critical rotary speed of CFRP drive-line is 20% higher than that of the original metal drive-line. Then, the vibration of the CFRP and the metal drive-line were tested. The test results show that application of the CFRP drive shaft in the drive-line can effectively reduce the vibration of the heavy-duty machine tool. Keywords: CFRP drive-line system, Dynamic behavior, Transfer matrix, Vibration measurement

A new view on dam lines in Polish Arabian horses based on mtDNA analysis

Directory of Open Access Journals (Sweden)

Sell Jerzy

2007-09-01

Full Text Available Abstract Polish Arabian horses are one of the oldest and the most important Arab populations in the world. The Polish Arabian Stud Book and the Genealogical Charts by Skorkowski are the main sources of information on the ancestors of Polish Arabs. Both publications were viewed as credible sources of information until the 1990s when the data regarding one of the dam lines was questioned. The aim of the current study was to check the accuracy of the pedigree data of Polish dam lines using mtDNA analysis. The analyses of a 458 bp mtDNA D-loop fragment from representatives of 15 Polish Arabian dam lines revealed 14 distinct haplotypes. The results were inconsistent with pedigree data in the case of two lines. A detailed analysis of the historical sources was performed to explain these discrepancies. Our study revealed that representatives of different lines shared the same haplotypes. We also noted a genetic identity between some lines founded by Polish mares of unknown origin and lines established by desert-bred mares.

40 CFR 1051.320 - What happens if one of my production-line vehicles or engines fails to meet emission standards?

Science.gov (United States)

2010-07-01

...-line vehicles or engines fails to meet emission standards? 1051.320 Section 1051.320 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM RECREATIONAL ENGINES AND VEHICLES Testing Production-Line Vehicles and Engines § 1051.320 What happens if one...

Response analysis on nonuniform transmission line

Directory of Open Access Journals (Sweden)

Cvetković Zlata

2005-01-01

Full Text Available Transients on a loss less exponential transmission line with a pure resistance load are presented in this paper. The approach is based on the two-port presentation of the transmission line. Using Picard-Carson's method the transmission line equations are solved. The relationship between source voltage and the load voltage in s-domain is derived. All the results are plotted using program package Mathematica 3.0.

Grain product of 34 soya mutant lines;Rendimiento de grano de 34 lineas mutantes de soya

Energy Technology Data Exchange (ETDEWEB)

Salmeron E, J.; Mastache L, A. A.; Valencia E, F.; Diaz V, G. E. [Colegio Superior Agropecuario del Estado de Guerrero, Vicente Guerrero No. 81, Col. Centro, 40000 Iguala, Guerrero (Mexico); Cervantes S, T. [Instituto de Recursos Geneticos y Productividad, Colegio de Posgraduados, Carretera Mexico-Texcoco Km. 36.5, Montecillo, 56230 Texcoco, Estado de Mexico (Mexico); De la Cruz T, E.; Garcia A, J. M.; Falcon B, T.; Gatica T, M. A. [ININ, Departamento de Biologia, Carretera Mexico-Toluca s/n, 52750 Ocoyoacac, Estado de Mexico (Mexico)

2009-07-01

This work was development with the objective of obtaining information of the agronomic behavior of 34 soya mutant lines (R{sub 4}M{sub 18}) for human consumption and this way to select the 2 better lines. The genetic materials were obtained starting from the variety ISAAEG-B M2 by means of the application of recurrent radiation with Co{sup 60} gammas, to a dose of 350 Gray for the first two generations and both later to 200 Gray and selection during 17 cycles, being obtained the 34 better lines mutants with agronomic characteristic wanted and good flavor. The obtained results were that the mutant lines L{sub 25} and L{sub 32} produced the major quantity in branches/plant number with 7.5 and 7.25, pods/plant number with 171.25 and 167, grains/plant number with 350.89 and 333.07 and grain product (ton/ha) to 15% of humidity 5.15 and 4.68 ton/ha, respectively. (Author)

Nuclear magnetic resonance line-shape analysis and determination of exchange rates

International Nuclear Information System (INIS)

Rao, B.D.

1989-01-01

The fact that chemical exchange processes occur at rates that cover a broad range and produce readily detectable effects on the spectrum is one of the attractive features of high-resolution NMR. The description of these line shapes in the presence of spin-spin coupling requires the density matrix theory which is rather complex. Analysis of the line shapes usually needs computer simulations and is capable of providing reliable information on the exchange rates as well as spectral parameters in the absence of exchange. Simplified procedures, ignoring spin-spin coupling, often result in deviations in these exchange and spectral parameters determined. A step-by-step procedure is detailed in this chapter for setting up the matrices required for computing the line shapes of exchanges involving weakly coupled spin systems on the basis of the density matrix theory without the need for a detailed understanding of the theory. A knowledge of the energy level structure and allowed transitions in the NMR spectra of the individual weakly coupled spin systems is all that is required. The procedure is amenable to numerical computation. The group of illustrative examples chosen to demonstrate the development of the computational tools cover some of the commonly encountered cases of exchange from simple systems to rather complex ones. Such exchanges occur frequently in biological molecules, especially those involving enzyme-substrate complexes. In cases where the experimental line shapes are obtained with respectable precision, and the relevant exchange processes are unambiguously identifiable, the computer simulation method of line-shape analysis is capable of providing useful and incisive information. The example of the 31P exchanges in the adenylate kinase is illustrative of this point

Analysis of transcript and protein overlap in a human osteosarcoma cell line

Directory of Open Access Journals (Sweden)

Emanuelsson Olof

2010-12-01

Full Text Available Abstract Background An interesting field of research in genomics and proteomics is to compare the overlap between the transcriptome and the proteome. Recently, the tools to analyse gene and protein expression on a whole-genome scale have been improved, including the availability of the new generation sequencing instruments and high-throughput antibody-based methods to analyze the presence and localization of proteins. In this study, we used massive transcriptome sequencing (RNA-seq to investigate the transcriptome of a human osteosarcoma cell line and compared the expression levels with in situ protein data obtained in-situ from antibody-based immunohistochemistry (IHC and immunofluorescence microscopy (IF. Results A large-scale analysis based on 2749 genes was performed, corresponding to approximately 13% of the protein coding genes in the human genome. We found the presence of both RNA and proteins to a large fraction of the analyzed genes with 60% of the analyzed human genes detected by all three methods. Only 34 genes (1.2% were not detected on the transcriptional or protein level with any method. Our data suggest that the majority of the human genes are expressed at detectable transcript or protein levels in this cell line. Since the reliability of antibodies depends on possible cross-reactivity, we compared the RNA and protein data using antibodies with different reliability scores based on various criteria, including Western blot analysis. Gene products detected in all three platforms generally have good antibody validation scores, while those detected only by antibodies, but not by RNA sequencing, generally consist of more low-scoring antibodies. Conclusion This suggests that some antibodies are staining the cells in an unspecific manner, and that assessment of transcript presence by RNA-seq can provide guidance for validation of the corresponding antibodies.

40 CFR 1042.320 - What happens if one of my production-line engines fails to meet emission standards?

Science.gov (United States)

2010-07-01

... an initial failed test if all of the following are true: (1) The catalyst was in a green condition... 40 Protection of Environment 32 2010-07-01 2010-07-01 false What happens if one of my production... MARINE COMPRESSION-IGNITION ENGINES AND VESSELS Testing Production-line Engines § 1042.320 What happens...

A prototype on-line work procedure system for radioisotope thermoelectric generator production

International Nuclear Information System (INIS)

Kiebel, G.R.

1991-09-01

An on-line system to manage work procedures is being developed to support radioisotope thermoelectric generator (RTG) assembly and testing in a new production facility. This system implements production work procedures as interactive electronic documents executed at the work site with no intermediate printed form. It provides good control of the creation and application of work procedures and provides active assistance to the worker in performing them and in documenting the results. An extensive prototype of this system is being evaluated to ensure that it will have all the necessary features and that it will fit the user's needs and expectations. This effort has involved the Radioisotope Power Systems Facility (RPSF) operations organization and technology transfer between Westinghouse Hanford Company (Westinghouse Hanford) and EG ampersand G Mound Applied Technologies Inc. (Mound) at the US Department of Energy (DOE) Mound Site. 1 ref

Applying Triz for Production Quality Improvement

Directory of Open Access Journals (Sweden)

Swee Nikalus Shu Luing

2017-01-01

Full Text Available This paper aims to provide a thorough analysis on the application of TRIZ in improving the quality of canned food production. TRIZ tools such as engineering systems analysis, function analysis, cause and effect chain analysis, By-separation model and 40 Inventive Principles are applied in order to discover some feasible and elegant solutions to alleviate the problem. Findings revealed that the rejected canned products on the conveyor belt will be isolated or picked up with other good condition canned products which are lined up very closely to the rejected cans; though the visioning system is able detect the fault printing on the canned product. The main root cause is that the rejected canned product is picked up with other canned products in good condition because all cans are lined up on the belt and are very close to each other or having no gaps between the cans. Conversely, all cans on the conveyor belts are required to be very close to each other to avoid collisions that may damage the cans. The root cause is solved by applying function analysis, By-separation tool and Inventive Principles. Therefore, it can be concluded that TRIZ is a powerful tool in inventive problem solving.

Perspectives for on-line analysis of bauxite by neutron irradiation

Science.gov (United States)

Beurton, Gabriel; Ledru, Bertrand; Letourneur, Philippe

1995-03-01

The interest in bauxite as a major source of alumina results in a strong demand for on-line instrumentation suitable for sorting, blending, and processing operations at the bauxite mine and for monitoring instrumentation in the Bayer process. The results of laboratory experiments based on neutron interactions with bauxite are described. The technique was chosen in order to overcome the problem of spatial heterogeneity in bulk mineral analysis. The evaluated elements contributed to approximately 99.5% of the sample weight. In addition, the measurements provide valuable information on physical parameters such as density, hygrometry, and material flow. Using a pulsed generator, the analysis system offers potential for on-line measurements (borehole logging or conveyor belt). An overall description of the experimental set-up is given. The experimental data include measurements of natural radioactivity, delayed radioactivity induced by activation, and prompt gamma rays following neutron reaction. In situ applications of neutron interactions provide continuous analysis and produce results which are more statistically significant. The key factors contributing to advances in industrial applications are the development of high count rate gamma spectroscopy and computational tools to design measurement systems and interpret their results.

An analysis of representative heating load lines for residential HSPF ratings

Energy Technology Data Exchange (ETDEWEB)

Rice, C. Keith [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Shen, Bo [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Shrestha, Som S. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

2015-07-01

This report describes an analysis to investigate representative heating loads for single-family detached homes using current EnergyPlus simulations (DOE 2014a). Hourly delivered load results are used to determine binned load lines using US Department of Energy (DOE) residential prototype building models (DOE 2014b) developed by Pacific Northwest National Laboratory (PNNL). The selected residential single-family prototype buildings are based on the 2006 International Energy Conservation Code (IECC 2006) in the DOE climate regions. The resulting load lines are compared with the American National Standards Institute (ANSI)/Air-Conditioning, Heating, and Refrigeration Institute (AHRI) Standard 210/240 (AHRI 2008) minimum and maximum design heating requirement (DHR) load lines of the heating seasonal performance factor (HSPF) ratings procedure for each region. The results indicate that a heating load line closer to the maximum DHR load line, and with a lower zero load ambient temperature, is more representative of heating loads predicted for EnergyPlus prototype residential buildings than the minimum DHR load line presently used to determine HSPF ratings. An alternative heating load line equation was developed and compared to binned load lines obtained from the EnergyPlus simulation results. The effect on HSPF of the alternative heating load line was evaluated for single-speed and two-capacity heat pumps, and an average HSPF reduction of 16% was found. The alternative heating load line relationship is tied to the rated cooling capacity of the heat pump based on EnergyPlus autosizing, which is more representative of the house load characteristics than the rated heating capacity. The alternative heating load line equation was found to be independent of climate for the six DOE climate regions investigated, provided an adjustable zero load ambient temperature is used. For Region IV, the default DOE climate region used for HSPF ratings, the higher load line results in an ~28

Risk analysis of sterile production plants: a new and simple, workable approach.

Science.gov (United States)

Gapp, Guenther; Holzknecht, Peter

2011-01-01

, and delivers sound arguments for investments. Practical experience with this risk analysis, which has already been executed in several production sites in various countries, has demonstrated that it is simple, workable, and delivers valuable information. Many important pharmaceutical products need to be sterile because they are to be injected into the patient's bloodstream or muscle. Sterile means that the product must be free of microorganisms (i.e., bacteria, yeast, and moulds). A non-sterile injection or infusion could lead to very serious or even lethal effects on the patient. Therefore one of the biggest challenges in the pharmaceutical industry nowadays is still the sterile production process itself. Microorganisms are everywhere in the environment, and humans are known to be a significant source of microbial contamination of a sterile product. It is necessary to set up a very effective quality assurance system as well as many quality control analysis tools to assure the sterility of the produced vials/syringes or of the bulk material intended for later filling into vials (bulk material, e.g., 10 kg in bags or cans). Above all, to get an accurate indication of the risk of non-compliance of product quality, regulatory agencies such as the U.S. Food and Drug Administration and the updated E.U. Good Manufacturing Practice (GMP) Guide have made it mandatory to perform a risk analysis of the production process. This provides in advance valuable information about the potential risk of a product's non-compliance with product specifications and GMP requirements, in our case regarding sterility. The authors set up a new approach for a risk analysis 4 years ago; this approach stems from fundamental experience gained over the past 15 years. Several specific questions are asked regarding various topics that correlate to the sterile production line and associated quality assurance/control systems. If the answer for an item is satisfactory and the best system is in place with

Line broadening analysis of implosion core conditions at Z using argon K-shell spectroscopy

International Nuclear Information System (INIS)

Burris-Mog, T.J.; Mancini, R.C.; Bailey, J.E.; Chandler, G.A.; Rochau, G.; Dunham, G.; Lake, P.W.; Peterson, K.; Slutz, S.A.; Mehlhorn, T.A.; Golovkin, I.E.; MacFarlane, J.J.

2006-01-01

We report on spectral line broadening analysis of Ar K-shell lines from argon-doped implosion cores driven by a dynamic hohlraum z-pinch. The observed Ar spectra include emissions from the resonance series in H- and He-like Ar ions, i.e., Lyα, Lyβ and Lyγ, and Heα, Heβ, Heγ and Heδ lines, respectively. The analysis accounts for opacity and Stark broadening to determine electron density, N e , and areal-density, NΔR, values for the ground state populations of H- and He-like Ar ions. Furthermore, these results are combined with the ratio of H- and He-like ground state populations to extract the electron temperature, T e

Physiological and molecular analysis of selected Kenyan maize lines for aluminum tolerance

Science.gov (United States)

Aluminum (Al) toxicity is an important limitation to maize production in many tropical and sub-tropical acid soil areas. The aim of this study was to survey the variation in Al tolerance in a panel of maize lines adapted for Kenya and look for novel sources of Al tolerance. 112 Kenyan maize accessio...

A system for accurate on-line measurement of total gas consumption or production rates in microbioreactors

NARCIS (Netherlands)

van Leeuwen, Michiel; Heijnen, Joseph J.; Gardeniers, Johannes G.E.; Oudshoorn, Arthur; Noorman, Henk; Visser, Jan; van der Wielen, Luuk A.M.; van Gulik, Walter M.

2009-01-01

A system has been developed, based on pressure controlled gas pumping, for accurate measurement of total gas consumption or production rates in the nmol/min range, applicable for on-line monitoring of bioconversions in microbioreactors. The system was validated by carrying out a bioconversion with

Field trial of a pair production gauge for the on-line determination of ash in coal on a conveyor belt

International Nuclear Information System (INIS)

Millen, M.J.; Sowerby, B.D.; Rafter, P.T.; Ellis, W.K.; Gravitis, V.L.; Howells, E.; McLennan, T.D.; Muldoon, L.J.

1984-01-01

The ash content of coal can be determined by a method based on pair production. Coal is irradiated with high energy γ-rays and the resulting 0.511 MeV annihilation and Compton scattered γ-rays are measured. The pair production (PP) technique has been previously proved in the laboratory on static bulk samples and in the field on high-throughput sample by-lines. In the present paper, a plant test to assess the PP gauge for direct on-line conveyor belt analysis is described. This test was undertaken on the recirculating coal facility at the pilot plant coal washery at the BHP Steel Works, Newcastle, New South Wales. Seven Hunter Valley coals with ash in the range 7.5-33 wt% were circulated around the conveyor loop, and scanned by both PP and low energy γ-ray transmission (LET) gauges. Samples were measured on-belt as a function of sample depth, compaction, moisture and particle size. The mass per unit area of coal on the belt was varied in the range 40-210 kg m -2 . The r.m.s. deviation between PP gauge ash and chemical laboratory ash was 1.07 wt% ash for 370 individual on-belt measurements on coal of mass per unit area greater than 60 kg m -2 ad 0.45 wt% ash for the mean ash of each sample. (author)

[Applications and prospects of on-line near infrared spectroscopy technology in manufacturing of Chinese materia medica].

Science.gov (United States)

Li, Yang; Wu, Zhi-Sheng; Pan, Xiao-Ning; Shi, Xin-Yuan; Guo, Ming-Ye; Xu, Bing; Qiao, Yan-Jiang

2014-10-01

The quality of Chinese materia medica (CMM) is affected by every process in CMM manufacturing. According to multi-unit complex features in the production of CMM, on-line near infrared spectroscopy (NIR) is used as an evaluating technology with its rapid, non-destructive and non-pollution etc. advantages. With the research in institutions, the on-line NIR applied in process analysis and control of CMM was described systematically, and the on-line NIR platform building was used as an example to clarify the feasibility of on-line NIR technology in CMM manufacturing process. Then, from the point of application by pharmaceutical companies, the current on-line NIR research on CMM and its production in pharmaceutical companies was relatively comprehensively summarized. Meanwhile, the types of CMM productions were classified in accordance with two formulations (liquid and solid dosage formulations). The different production processes (extraction, concentration and alcohol precipitation, etc. ) were used as liquid formulation diacritical points; the different types (tablets, capsules and plasters, etc.) were used as solid dosage formulation diacritical points, and the reliability of on-line NIR used in the whole process in CMM production was proved in according to the summary of literatures in recent 10 years, which could support the modernization of CMM production.

Computer-controlled on-line gamma analysis for krypton-85

International Nuclear Information System (INIS)

Canuette, R.P.

1980-03-01

85 Kr will be evolved from spent nuclear fuel during both the voloxidation and dissolution processes, so a reliable method for on-line analysis of 85 Kr in the off-gas system is needed. Tritium, 14 C, and 129 I were trapped, and the activity of 85 Kr was then measured using a Li-drifted Ge detector. Equipment used to carry out this analysis is described; the PET computer is used. The 85 Kr evolution rate was correlated with the fuel dissolution rate; the close correlation permits one to monitor the fuel dissolution process. 11 figures

Multiparametric amplitude analysis with on-line compression using adaptive orthogonal transform

Energy Technology Data Exchange (ETDEWEB)

Morhac, M; Matousek, V; Turzo, I

1996-12-31

The new method of multiparameter amplitude analysis with on-line compression is developed. The proposed method decreases the memory needed to store multidimensional histograms. Examples of employing the algorithms for three-dimensional spectra are presented. 5 refs.

Proteomic analysis of cell lines to identify the irinotecan resistance ...

Indian Academy of Sciences (India)

MADHU

was selected from the wild-type LoVo cell line by chronic exposure to irinotecan ... dose–effect curves of anticancer drugs were drawn on semilogarithm .... alcohol metabolites daunorubicinol (Forrest and Gonzalez. 2000; Mordente et al. ..... Chen L, Huang C and Wei Y 2007 Proteomic analysis of liver cancer cells treated ...

Comparative proteomics analysis of oral cancer cell lines: identification of cancer associated proteins

Science.gov (United States)

2014-01-01

Background A limiting factor in performing proteomics analysis on cancerous cells is the difficulty in obtaining sufficient amounts of starting material. Cell lines can be used as a simplified model system for studying changes that accompany tumorigenesis. This study used two-dimensional gel electrophoresis (2DE) to compare the whole cell proteome of oral cancer cell lines vs normal cells in an attempt to identify cancer associated proteins. Results Three primary cell cultures of normal cells with a limited lifespan without hTERT immortalization have been successfully established. 2DE was used to compare the whole cell proteome of these cells with that of three oral cancer cell lines. Twenty four protein spots were found to have changed in abundance. MALDI TOF/TOF was then used to determine the identity of these proteins. Identified proteins were classified into seven functional categories – structural proteins, enzymes, regulatory proteins, chaperones and others. IPA core analysis predicted that 18 proteins were related to cancer with involvements in hyperplasia, metastasis, invasion, growth and tumorigenesis. The mRNA expressions of two proteins – 14-3-3 protein sigma and Stress-induced-phosphoprotein 1 – were found to correlate with the corresponding proteins’ abundance. Conclusions The outcome of this analysis demonstrated that a comparative study of whole cell proteome of cancer versus normal cell lines can be used to identify cancer associated proteins. PMID:24422745

Supergravity couplings to Noncommutative Branes, Open Wilson Lines and Generalised Star Products

International Nuclear Information System (INIS)

Das, S.R.; Trivedi, S.P.

2001-01-01

Noncommutative gauge theories can be constructed from ordinary U(∞) gauge theories in lower dimensions. Using this construction we identify the operators on noncommutative D-branes which couple to linearized supergravity backgrounds, from a knowledge of such couplings to lower dimensional D-branes with no B field. These operators belong to a class of gauge invariant observables involving open Wilson lines. Assuming a DBI form of the coupling we show, to second order in the gauge potential but to all orders of the noncommutativity parameter, that our proposal agrees with the operator obtained in terms of ordinary gauge fields by considering brane actions in backgrounds and then using the Seiberg-Witten map to rewrite this in terms of noncommutative gauge fields. Our result clarify why a certain commutative but non-associative 'generalized star product' appears both in the expansion of the open Wilson line, as well as in string amplitude computations of open string-closed string couplings. We outline how our procedure can be used to obtain operators in the noncommutative theory which are holographically dual to supergravity modes. (author)

Productivity and fishing pressure drive variability in fish parasite assemblages of the Line Islands, equatorial Pacific.

Science.gov (United States)

Wood, Chelsea L; Baum, Julia K; Reddy, Sheila M W; Trebilco, Rowan; Sandin, Stuart A; Zgliczynski, Brian J; Briggs, Amy A; Micheli, Fiorenza

2015-05-01

Variability in primary productivity and fishing pressure can shape the abundance, species composition, and diversity of marine life. Though parasites comprise nearly half of marine species, their responses to these important forces remain little explored. We quantified parasite assemblages at two spatial scales, across a gradient in productivity and fishing pressure that spans six coral islands of the Line Islands archipelago and within the largest Line Island, Kiritimati, which experiences a west-to-east gradient in fishing pressure and upwelling-driven productivity. In the across-islands data set, we found that increasing productivity was correlated with increased parasite abundance overall, but that the effects of productivity differed among parasite groups. Trophically transmitted parasites increased in abundance with increasing productivity, but directly transmitted parasites did not exhibit significant changes. This probably arises because productivity has stronger effects on the abundance of the planktonic crustaceans and herbivorous snails that serve as the intermediate hosts of trophically transmitted parasites than on the higher-trophic level fishes that are the sole hosts of directly transmitted parasites. We also found that specialist parasites increased in response to increasing productivity, while generalists did not, possibly because specialist parasites tend to be more strongly limited by host availability than are generalist parasites. After the effect of productivity was controlled for, fishing was correlated with decreases in the abundance of trophically transmitted parasites, while directly transmitted parasites appeared to track host density; we observed increases in the abundance of parasites using hosts that experienced fishing-driven compensatory increases in abundance. The within-island data set confirmed these patterns for the combined effects of productivity and fishing on parasite abundance, suggesting that our conclusions are robust

Identification of a novel rhabdovirus in Spodoptera frugiperda cell lines.

Science.gov (United States)

Ma, Hailun; Galvin, Teresa A; Glasner, Dustin R; Shaheduzzaman, Syed; Khan, Arifa S

2014-06-01

The Sf9 cell line, derived from Spodoptera frugiperda, is used as a cell substrate for biological products, and no viruses have been reported in this cell line after extensive testing. We used degenerate PCR assays and massively parallel sequencing (MPS) to identify a novel RNA virus belonging to the order Mononegavirales in Sf9 cells. Sequence analysis of the assembled virus genome showed the presence of five open reading frames (ORFs) corresponding to the genes for the N, P, M, G, and L proteins in other rhabdoviruses and an unknown ORF of 111 amino acids located between the G- and L-protein genes. BLAST searches indicated that the S. frugiperda rhabdovirus (Sf-rhabdovirus) was related in a limited region of the L-protein gene to Taastrup virus, a newly discovered member of the Mononegavirales from a leafhopper (Hemiptera), and also to plant rhabdoviruses, particularly in the genus Cytorhabdovirus. Phylogenetic analysis of sequences in the L-protein gene indicated that Sf-rhabdovirus is a novel virus that branched with Taastrup virus. Rhabdovirus morphology was confirmed by transmission electron microscopy of filtered supernatant samples from Sf9 cells. Infectivity studies indicated potential transient infection by Sf-rhabdovirus in other insect cell lines, but there was no evidence of entry or virus replication in human cell lines. Sf-rhabdovirus sequences were also found in the Sf21 parental cell line of Sf9 cells but not in other insect cell lines, such as BT1-TN-5B1-4 (Tn5; High Five) cells and Schneider's Drosophila line 2 [D.Mel.(2); SL2] cells, indicating a species-specific infection. The results indicate that conventional methods may be complemented by state-of-the-art technologies with extensive bioinformatics analysis for identification of novel viruses. The Spodoptera frugiperda Sf9 cell line is used as a cell substrate for the development and manufacture of biological products. Extensive testing has not previously identified any viruses in this cell

Sex effect on productive parameters, carcass and body fat composition of two commercial broilers lines

Directory of Open Access Journals (Sweden)

S Rondelli

2003-12-01

Full Text Available The aim of this work was to evaluate sex effect on behavior of two commercial broilers lines. Productive parameters, carcass composition and yield, amount and quality of fat deposited in the meat and skin and total body fat were studied. A completely randomized design with four treatments (MR-Male Ross, HR-Female Ross, MAF-Male Avian Farm and HAF-Female Avian Farm and eight repetitions of 40 chickens was used. Animals received water and food ad libitum. After 50 days, two birds (a male and a female per repetition were chosen at random and slaughtered for carcass evaluation. Samples of breast, leg, skin and abdominal fats were analyzed to determine the percentage of intramuscular fat, total cholesterol and fatty acid composition. The Ross line showed higher final weight and weight gain, better intake and feed conversion rate. Also, it was observed that females of both lines had similar results in relation to these parameters. Better yield of breast with bone was found in Ross males and females. In relation to legs and thigh, Ross males showed better results and no differences were observed among females of both lines. Males deposited less fat than females. Finally, differences in percentage of intramuscular fat, content of cholesterol in breast with skin, leg with skin and skin, percentage of saturated, mono and polyunsaturated fatty acids were observed between sex and lines.

Comparative analysis of mitochondrial genomes between a wheat K-type cytoplasmic male sterility (CMS) line and its maintainer line.

Science.gov (United States)

Liu, Huitao; Cui, Peng; Zhan, Kehui; Lin, Qiang; Zhuo, Guoyin; Guo, Xiaoli; Ding, Feng; Yang, Wenlong; Liu, Dongcheng; Hu, Songnian; Yu, Jun; Zhang, Aimin

2011-03-29

Plant mitochondria, semiautonomous organelles that function as manufacturers of cellular ATP, have their own genome that has a slow rate of evolution and rapid rearrangement. Cytoplasmic male sterility (CMS), a common phenotype in higher plants, is closely associated with rearrangements in mitochondrial DNA (mtDNA), and is widely used to produce F1 hybrid seeds in a variety of valuable crop species. Novel chimeric genes deduced from mtDNA rearrangements causing CMS have been identified in several plants, such as rice, sunflower, pepper, and rapeseed, but there are very few reports about mtDNA rearrangements in wheat. In the present work, we describe the mitochondrial genome of a wheat K-type CMS line and compare it with its maintainer line. The complete mtDNA sequence of a wheat K-type (with cytoplasm of Aegilops kotschyi) CMS line, Ks3, was assembled into a master circle (MC) molecule of 647,559 bp and found to harbor 34 known protein-coding genes, three rRNAs (18 S, 26 S, and 5 S rRNAs), and 16 different tRNAs. Compared to our previously published sequence of a K-type maintainer line, Km3, we detected Ks3-specific mtDNA (> 100 bp, 11.38%) and repeats (> 100 bp, 29 units) as well as genes that are unique to each line: rpl5 was missing in Ks3 and trnH was absent from Km3. We also defined 32 single nucleotide polymorphisms (SNPs) in 13 protein-coding, albeit functionally irrelevant, genes, and predicted 22 unique ORFs in Ks3, representing potential candidates for K-type CMS. All these sequence variations are candidates for involvement in CMS. A comparative analysis of the mtDNA of several angiosperms, including those from Ks3, Km3, rice, maize, Arabidopsis thaliana, and rapeseed, showed that non-coding sequences of higher plants had mostly divergent multiple reorganizations during the mtDNA evolution of higher plants. The complete mitochondrial genome of the wheat K-type CMS line Ks3 is very different from that of its maintainer line Km3, especially in non

Comparative analysis of mitochondrial genomes between a wheat K-type cytoplasmic male sterility (CMS line and its maintainer line

Directory of Open Access Journals (Sweden)

Liu Dongcheng

2011-03-01

Full Text Available Abstract Background Plant mitochondria, semiautonomous organelles that function as manufacturers of cellular ATP, have their own genome that has a slow rate of evolution and rapid rearrangement. Cytoplasmic male sterility (CMS, a common phenotype in higher plants, is closely associated with rearrangements in mitochondrial DNA (mtDNA, and is widely used to produce F1 hybrid seeds in a variety of valuable crop species. Novel chimeric genes deduced from mtDNA rearrangements causing CMS have been identified in several plants, such as rice, sunflower, pepper, and rapeseed, but there are very few reports about mtDNA rearrangements in wheat. In the present work, we describe the mitochondrial genome of a wheat K-type CMS line and compare it with its maintainer line. Results The complete mtDNA sequence of a wheat K-type (with cytoplasm of Aegilops kotschyi CMS line, Ks3, was assembled into a master circle (MC molecule of 647,559 bp and found to harbor 34 known protein-coding genes, three rRNAs (18 S, 26 S, and 5 S rRNAs, and 16 different tRNAs. Compared to our previously published sequence of a K-type maintainer line, Km3, we detected Ks3-specific mtDNA (> 100 bp, 11.38% and repeats (> 100 bp, 29 units as well as genes that are unique to each line: rpl5 was missing in Ks3 and trnH was absent from Km3. We also defined 32 single nucleotide polymorphisms (SNPs in 13 protein-coding, albeit functionally irrelevant, genes, and predicted 22 unique ORFs in Ks3, representing potential candidates for K-type CMS. All these sequence variations are candidates for involvement in CMS. A comparative analysis of the mtDNA of several angiosperms, including those from Ks3, Km3, rice, maize, Arabidopsis thaliana, and rapeseed, showed that non-coding sequences of higher plants had mostly divergent multiple reorganizations during the mtDNA evolution of higher plants. Conclusion The complete mitochondrial genome of the wheat K-type CMS line Ks3 is very different from that of

On Line Validation Exercise (OLIVE: A Web Based Service for the Validation of Medium Resolution Land Products. Application to FAPAR Products

Directory of Open Access Journals (Sweden)

Marie Weiss

2014-05-01

Full Text Available The OLIVE (On Line Interactive Validation Exercise platform is dedicated to the validation of global biophysical products such as LAI (Leaf Area Index and FAPAR (Fraction of Absorbed Photosynthetically Active Radiation. It was developed under the framework of the CEOS (Committee on Earth Observation Satellites Land Product Validation (LPV sub-group. OLIVE has three main objectives: (i to provide a consistent and centralized information on the definition of the biophysical variables, as well as a description of the main available products and their performances (ii to provide transparency and traceability by an online validation procedure compliant with the CEOS LPV and QA4EO (Quality Assurance for Earth Observation recommendations (iii and finally, to provide a tool to benchmark new products, update product validation results and host new ground measurement sites for accuracy assessment. The functionalities and algorithms of OLIVE are described to provide full transparency of its procedures to the community. The validation process and typical results are illustrated for three FAPAR products: GEOV1 (VEGETATION sensor, MGVIo (MERIS sensor and MODIS collection 5 FPAR. OLIVE is available on the European Space Agency CAL/VAL portal, including full documentation, validation exercise results, and product extracts.

Assembly-line health check up in digitalized hospital.

Science.gov (United States)

Liu, Yalan; Yao, Bin; Zhang, Zigang

2002-01-01

The health check up flow of digital hospital can be consulted with the assembly line of industry factory. Because they have the following same features: highly specialized workstation, closeness and continuance, rhythm, balanced production, continuous production. The essential prerequisites are as the follows: The inspecting items and methods should be stable; advanced product mix and stable production design; standardized raw material, consumption, procedure, inspection method; there are lots of request for health inspection; the customers move at the least unit; the space arrangement should be reasonable; the time arrangement should be proportion. With the computer net, the digital inspection can achieves the raw material controlling accurately. The basis of check up line concerns about equipment, net and software, data collection, and personnel. The group technology is used in the health inspection flow design of the digital hospital in the field of items customers and zone redivided. The digital assembly linemic health inspect has the following stages: member registering, notice, check in, arrange order, time control, report, feedback and analysis. The assembly linemic has following advantages: increasing the productivity, the space utility, satisfaction of customer, fund returning, lowering the cost and ensuring the quality.

Strategic analysis of ABC Systems and its potential future product

OpenAIRE

Lam, Nancy M.

2006-01-01

ABC Systems Limited is a provider of data communication software. Its main product line is protocol conversion software. ABC has developed several other products including some hardware products, but the main success remains the protocol conversion software developed over 10 years ago. The company is having difficulties discovering and developing a profitable and achievable new product and target market. The need for the protocol conversion software is diminishing as the standard of TCP/IP is...

Retrospective analysis of third-line chemotherapy in advanced non-small cell lung cancer

Directory of Open Access Journals (Sweden)

Ali Murat Tatli

2015-01-01

Results: A total of 72 patients who had received third-line or higher chemotherapy were included in the analysis. The median age of patients was 49 years (range 41-76, and there were 13 (18.1% women and 59 (81.9% men. Estimated median survival was 26 months. Moreover, overall survival was significantly longer in patients for whom disease control was achieved after second-line chemotherapy compared to those with disease progression (34 vs. 17 months, respectively. Survival after third-line treatment was significantly longer in the group with Eastern Cooperative Oncology Group (ECOG performance status 0-1 at the beginning of third-line therapy compared to patients with a status of 2-3. Conclusions: In patients with advanced stage NSCLC, administration of third-line and higher systemic chemotherapy may be associated with increase in overall survival. Furthermore, greater increases in overall survival were also observed in patients for whom disease control was achieved after second-line therapy and in those with ECOG performance status of 0-1 before third-line treatment.

Establishment of a high production system for AIDS retroviruses with a human T-leukemic cell line Molt-4

International Nuclear Information System (INIS)

Koyanagi, Yoshio; Harada, Shinji; Yamamoto, Naoki

1986-01-01

A cell culture system was developed for the continuous and efficient production of acquired immune deficiency syndrome (AIDS) retrovirus. After infection of a human T-cell line Molt-4 with HTLV-III and LAV the cells grow permanently and produce large amounts of virus continuously. The yields of production of virus were assessed either with reverse transcriptase activity or a newly established biological quantitation assay of active virus. The amounts of virus with this cell system were much higher than those of the H9 cell system. This procedure enabled us first to compare the two viral isolates HTLV-III and LAV directly in the same cell lines. Establishment of the culture system, allowing efficient production of AIDS retroviruses, provides a useful tool for the isolation of the virus from patients with AIDS and for more basic research, such as the mechanisms of immune destruction caused by the virus leading to the occurence of various malignancies (author)

Evaluation of angular distributions and production cross-sections for discrete gamma lines in iron

International Nuclear Information System (INIS)

Savin, M.V.; Livke, A.V.; Zvenigorodskij, A.G.

2001-01-01

The experimental data were compiled and the angular distributions and production cross-sections for the E γ = 846.8, 1238.3 and 1810.8 keV discrete gamma-lines evaluated. The Legendre polynomial coefficients describing the angular distributions in the energy range up to E n = 14.0 MeV and cross-section values in the E n = 0.85-19.0 MeV range were evaluated. (author)

Line broadening analysis of implosion core conditions at Z using argon K-shell spectroscopy

Energy Technology Data Exchange (ETDEWEB)

Burris-Mog, T.J. [Department of Physics, University of Nevada, Reno, NV 89557 (United States)]. E-mail: burris@physics.unr.edu; Mancini, R.C. [Sandia National Laboratories, Albuquerque, NM 87185 (United States); Bailey, J.E. [Sandia National Laboratories, Albuquerque, NM 87185 (United States); Chandler, G.A. [Sandia National Laboratories, Albuquerque, NM 87185 (United States); Rochau, G. [Sandia National Laboratories, Albuquerque, NM 87185 (United States); Dunham, G. [Sandia National Laboratories, Albuquerque, NM 87185 (United States); Lake, P.W. [Sandia National Laboratories, Albuquerque, NM 87185 (United States); Peterson, K. [Sandia National Laboratories, Albuquerque, NM 87185 (United States); Slutz, S.A. [Sandia National Laboratories, Albuquerque, NM 87185 (United States); Mehlhorn, T.A. [Sandia National Laboratories, Albuquerque, NM 87185 (United States); Golovkin, I.E. [Prism Computational Sciences, Madison, WI 53703 (United States); MacFarlane, J.J. [Prism Computational Sciences, Madison, WI 53703 (United States)

2006-05-15

We report on spectral line broadening analysis of Ar K-shell lines from argon-doped implosion cores driven by a dynamic hohlraum z-pinch. The observed Ar spectra include emissions from the resonance series in H- and He-like Ar ions, i.e., Ly{alpha}, Ly{beta} and Ly{gamma}, and He{alpha}, He{beta}, He{gamma} and He{delta} lines, respectively. The analysis accounts for opacity and Stark broadening to determine electron density, N{sub e}, and areal-density, N{delta}R, values for the ground state populations of H- and He-like Ar ions. Furthermore, these results are combined with the ratio of H- and He-like ground state populations to extract the electron temperature, T{sub e}.

Thermal stratification and fatigue stress analysis for pressurizer surge line

International Nuclear Information System (INIS)

Yu Xiaofei; Zhang Yixiong

2011-01-01

Thermal stratification of pressurizer surge line induced by the inside fluid results in the global bending moments, local thermal stresses, unexpected displacements and support loadings of the pipe system. In order to avoid a costly three-dimensional computation, a combined 1D/2D technique has been developed and implemented to analyze the thermal stratification and fatigue stress of pressurize surge line of QINSHAN Phase II Extension Nuclear Power Project in this paper, using the computer codes SYSTUS and ROCOCO. According to the mechanical analysis results of stratification, the maximum stress and cumulative usage factor are obtained. The results indicate that the stress and fatigue intensity considering thermal stratification satisfies RCC-M criterion. (authors)

Reducing BWR O and M costs through on-line performance monitoring

International Nuclear Information System (INIS)

Jonas, T.; Gross, R.; Logback, F.; Josyula, R.

1995-01-01

Competition in the electric power industry has placed significant emphasis on reducing operating and maintenance (O and M) costs at nuclear facilities. Therefore, on-line performance monitoring to locate power losses for boiling water reactor (BWR) plants is creating tremendous interest. In addition, the ability to automate activities such as data collection, analysis, and reporting increases the efficiency of plant engineers and gives them more time to concentrate on solving plant efficiency problems. This capability is now available with a unique software product called GEBOPS. GE Nuclear Energy, in conjunction with Joint Venture partner Black and Veatch, has undertaken development of the General Electric/Black and Veatch On-line Performance System (GEBOPS), an on-line performance monitoring system for BWR plants. The experience and expertise of GE Nuclear Energy with BWR plants, coupled with the proven on-line monitoring software development experience and capability of Black and Veatch, provide the foundation for a unique product which addresses the needs of today's BWR plants

SEADYN Analysis of a Tow Line for a High Altitude Towed Glider

Science.gov (United States)

Colozza, Anthony J.

1996-01-01

The concept of using a system, consisting of a tow aircraft, glider and tow line, which would enable subsonic flight at altitudes above 24 km (78 kft) has previously been investigated. The preliminary results from these studies seem encouraging. Under certain conditions these studies indicate the concept is feasible. However, the previous studies did not accurately take into account the forces acting on the tow line. Therefore in order to investigate the concept further a more detailed analysis was needed. The code that was selected was the SEADYN cable dynamics computer program which was developed at the Naval Facilities Engineering Service Center. The program is a finite element based structural analysis code that was developed over a period of 10 years. The results have been validated by the Navy in both laboratory and at actual sea conditions. This code was used to simulate arbitrarily-configured cable structures subjected to excitations encountered in real-world operations. The Navy's interest was mainly for modeling underwater tow lines, however the code is also usable for tow lines in air when the change in fluid properties is taken into account. For underwater applications the fluid properties are basically constant over the length of the tow line. For the tow aircraft/glider application the change in fluid properties is considerable along the length of the tow line. Therefore the code had to be modified in order to take into account the variation in atmospheric properties that would be encountered in this application. This modification consisted of adding a variable density to the fluid based on the altitude of the node being calculated. This change in the way the code handled the fluid density had no effect on the method of calculation or any other factor related to the codes validation.

The Galactic 511 keV line: analysis and interpretation of Integral observations

International Nuclear Information System (INIS)

Lonjou, V.

2005-09-01

Ever since the discovery of the 511 keV annihilation line emission from the galactic center region in the late seventies, the origin of galactic positrons has been the topic of a vivid scientific debate. It is also one of the prime scientific objectives of the imaging spectrometer SPI on board ESA's INTEGRAL observatory. In this thesis first a description of the most important SPI sub-system is given - the detector plane. Procedures for detector energy calibration and detector degradation analysis are developed. The determination of instrumental background models, a crucial aspect of data analysis, is elaborated. These background models are then applied to deriving sky maps and spectra of unprecedented quality of the Galactic positron annihilation radiation. The emission is centered on the galactic center with a spatial resolution of 8 degrees (FWHM), a second spatial component appears clearly: the galactic disc. The ray energy has been measured with unprecedented accuracy: 511.0 ± 0.03 keV for a full width at half maximum (FWHM) of 2.07 ± 0.1 keV. The total galactic flux ranges from 1.09 to 2.43 10 -3 ph.cm -2 .s -1 including uncertainties on spatial distribution. Finally, the implications of these observations for the production of positrons by various Galactic populations are discussed