WorldWideScience

Sample records for product layer increases

  1. Development of Production PVD-AIN Buffer Layer System and Processes to Reduce Epitaxy Costs and Increase LED Efficiency

    Energy Technology Data Exchange (ETDEWEB)

    Cerio, Frank

    2013-09-14

    The DOE has set aggressive goals for solid state lighting (SSL) adoption, which require manufacturing and quality improvements for virtually all process steps leading to an LED luminaire product. The goals pertinent to this proposed project are to reduce the cost and improve the quality of the epitaxial growth processes used to build LED structures. The objectives outlined in this proposal focus on achieving cost reduction and performance improvements over state-of-the-art, using technologies that are low in cost and amenable to high efficiency manufacturing. The objectives of the outlined proposal focus on cost reductions in epitaxial growth by reducing epitaxy layer thickness and hetero-epitaxial strain, and by enabling the use of larger, less expensive silicon substrates and would be accomplished through the introduction of a high productivity reactive sputtering system and an effective sputtered aluminum-nitride (AlN) buffer/nucleation layer process. Success of the proposed project could enable efficient adoption of GaN on-silicon (GaN/Si) epitaxial technology on 150mm silicon substrates. The reduction in epitaxy cost per cm{sup 2} using 150mm GaN-on-Si technology derives from (1) a reduction in cost of ownership and increase in throughput for the buffer deposition process via the elimination of MOCVD buffer layers and other throughput and CoO enhancements, (2) improvement in brightness through reductions in defect density, (3) reduction in substrate cost through the replacement of sapphire with silicon, and (4) reduction in non-ESD yield loss through reductions in wafer bow and temperature variation. The adoption of 150mm GaN/Si processing will also facilitate significant cost reductions in subsequent wafer fabrication manufacturing costs. There were three phases to this project. These three phases overlap in order to aggressively facilitate a commercially available production GaN/Si capability. In Phase I of the project, the repeatability of the performance

  2. STRATEGIES FOR INCREASING PRODUCTIVITY IN PRODUCTION SYSTEMS

    Directory of Open Access Journals (Sweden)

    Diego Pacheco

    2014-05-01

    Full Text Available The main objective of this article is to point a set of practical strategies that can be adopted to increase the capacity of constraints resources on production systems, when the constraint is inside the factory and not is in the market. To serve this purpose will be presented strategies based on best practices of the Theory of Constraints, Lean Manufacturing and Total Productive Maintenance. This article also presents the mains tools for the deployment of these methodologies. The survey results have provided an objective set of practical strategy that can be used to increase the capacity and productivity of production systems according to the needs of each manufacturing system.

  3. Implications of increased ethanol production

    International Nuclear Information System (INIS)

    1992-06-01

    The implications of increased ethanol production in Canada, assuming a 10% market penetration of a 10% ethanol/gasoline blend, are evaluated. Issues considered in the analysis include the provision of new markets for agricultural products, environmental sustainability, energy security, contribution to global warming, potential government cost (subsidies), alternative options to ethanol, energy efficiency, impacts on soil and water of ethanol crop production, and acceptance by fuel marketers. An economic analysis confirms that ethanol production from a stand-alone plant is not economic at current energy values. However, integration of ethanol production with a feedlot lowers the break-even price of ethanol by about 35 cents/l, and even further reductions could be achieved as technology to utilize lignocellulosic feedstock is commercialized. Ethanol production could have a positive impact on farm income, increasing cash receipts to grain farmers up to $53 million. The environmental impact of ethanol production from grain would be similar to that from crop production in general. Some concerns about ethanol/gasoline blends from the fuel industry have been reduced as those blends are now becoming recommended in some automotive warranties. However, the concerns of the larger fuel distributors are a serious constraint on an expansion of ethanol use. The economics of ethanol use could be improved by extending the federal excise tax exemption now available for pure alcohol fuels to the alcohol portion of alcohol/gasoline blends. 9 refs., 10 tabs

  4. Industrial-scale spray layer-by-layer assembly for production of biomimetic photonic systems.

    Science.gov (United States)

    Krogman, K C; Cohen, R E; Hammond, P T; Rubner, M F; Wang, B N

    2013-12-01

    Layer-by-layer assembly is a powerful and flexible thin film process that has successfully reproduced biomimetic photonic systems such as structural colour. While most of the seminal work has been carried out using slow and ultimately unscalable immersion assembly, recent developments using spray layer-by-layer assembly provide a platform for addressing challenges to scale-up and manufacturability. A series of manufacturing systems has been developed to increase production throughput by orders of magnitude, making commercialized structural colour possible. Inspired by biomimetic photonic structures we developed and demonstrated a heat management system that relies on constructive reflection of near infrared radiation to bring about dramatic reductions in heat content.

  5. Does milk increase mucus production?

    Science.gov (United States)

    Bartley, Jim; McGlashan, Susan Read

    2010-04-01

    Excessive milk consumption has a long association with increased respiratory tract mucus production and asthma. Such an association cannot be explained using a conventional allergic paradigm and there is limited medical evidence showing causality. In the human colon, beta-casomorphin-7 (beta-CM-7), an exorphin derived from the breakdown of A1 milk, stimulates mucus production from gut MUC5AC glands. In the presence of inflammation similar mucus overproduction from respiratory tract MUC5AC glands characterises many respiratory tract diseases. beta-CM-7 from the blood stream could stimulate the production and secretion of mucus production from these respiratory glands. Such a hypothesis could be tested in vitro using quantitative RT-PCR to show that the addition of beta-CM-7 into an incubation medium of respiratory goblet cells elicits an increase in MUC5AC mRNA and by identifying beta-CM-7 in the blood of asthmatic patients. This association may not necessarily be simply cause and effect as the person has to be consuming A1 milk, beta-CM-7 must pass into the systemic circulation and the tissues have to be actively inflamed. These prerequisites could explain why only a subgroup of the population, who have increased respiratory tract mucus production, find that many of their symptoms, including asthma, improve on a dairy elimination diet. (c) 2009 Elsevier Ltd. All rights reserved.

  6. Increase Productivity Through Knowledge Management

    OpenAIRE

    Gavrikova, Nadezhda Aleksandrovna; Dolgikh, Irina Nikolaevna; Dyrina, E. N.

    2016-01-01

    Increase in competition level requires companies to improve the efficiency of work force use characterized by labor productivity. Professional knowledge of staff and its experience play the key role in it. The results of Extrusion Line operator's working time analysis are performed in this article. The analysis revealed that the reasons of working time ineffective use connected with inadequate information exchange and knowledge management in the company. Authors suggest the way to solve this ...

  7. Job stress and productivity increase.

    Science.gov (United States)

    Adaramola, Samson Sunday

    2012-01-01

    This paper examines mental and physical pressures that workers bear at work. The authors discuss how on the-job stress affects a person's capabilities and productivity, and how such pressures lend to higher incidences of accidents at work. The paper also discuss methods of reducing job-related stress and increasing productivity. An intervention was conducted amongst workers in a private firm. It shows mental and emotional pressure can affect performance and productivity of a worker on the job. One of the biggest influences of today's worker is on the-job stress. Job stress occurs when the requirements of the job do not match the capabilities, resources, or needs of the worker. This consequently affects how a person would normally deal with customer service problems, grievances, violence, conflict, and decisions on the job. Stress is an inevitable part of everyday life, and is therefore a distinct part of a person's job. To properly control the outcome of stress, there are certain precautions and methods that should be taken that will boost productivity.

  8. Future active layer dynamics and carbon dioxide production from thawing permafrost layers in Northeast Greenland

    DEFF Research Database (Denmark)

    Hollesen, Jørgen; Elberling, Bo; Jansson, P.E.

    2011-01-01

    Thawing permafrost and the resulting mineralization of previously frozen organic carbon (C) is considered an important future feedback from terrestrial ecosystems to the atmosphere. Here, we use a dynamic process oriented permafrost model, the CoupModel, to link surface and subsurface temperatures....... The model is successfully adjusted and applied for the study area and shown to be able to simulate active layer dynamics. Subsequently, the model is used to predict the active layer thickness under future warming scenarios. The model predicts an increase of maximum active layer thickness from today 70 to 80......–105 cm as a result of a 2–6 °C warming. An additional increase in the maximum active layer thickness of a few centimetres may be expected due to heat production from decomposition of organic matter. Simulated future soil temperatures and water contents are subsequently used with measured basal soil...

  9. Malmquist Productivity Index on Efficiency Layers

    Directory of Open Access Journals (Sweden)

    F. Rezai balf ∗

    2012-09-01

    Full Text Available Data Envelopment Analysis (DEA, a popular linear programming technique is useful to rate comparatively operational effiency of decision Making Unit (DMU based on the their deterministic inputoutput data. The Malmquist productivity index in DEA, calculable with the distance function, for measurement the productivity change among two variant time period or two variant group in the same time. This index is based on two factor of efficiency change index and a technological change index. In this paper, we operate on the collective Malmquist productivity index, which performs clustering operation DMUs with classification into different levels of efficient frontier, and then we discuss on the relation between Malmquist index on the efficiency layers and their attractiveness and progress

  10. Impact of exposure to cold on layer production

    Directory of Open Access Journals (Sweden)

    FMS Alves

    2012-09-01

    Full Text Available Infrared thermographic images were used to evaluate the effect of the exposure of layers to cold. In this trial, 540 Isa Brown® layers with an average age of 69 weeks were housed in a conventional layer house typically used in Brazil during a period of cold environmental temperatures. Environmental and heat-transference data were recorded between July 13-16, 2010. It was verified that layers under cold stress conditions lost four times more energy that the recommendations trying to maintain their body temperature. Due to their reduced feed intake capacity, hens are not capable of increasing the availability of the metabolic energy required to maintain their body temperature and egg production, consequently resulting in economic losses.

  11. Increase of rotation angle of soil layers during plow operation

    Science.gov (United States)

    Vasilenko, VV; Afonichev, D. N.; Vasilenko, S. V.; Khakhulin, A. N.

    2018-03-01

    One of the advantages of plowing is the ability of the plow to hide the weed seeds deep into the soil. The depth of the embankment exceeds 10-12 cm, from there the weeds can not rise to the surface of the soil. They perish halfway. But for this, it is necessary to wrap the soil layers at an angle close to 180 °. Modern ploughs can not turn the layers of soil at an angle of more than 135 °, therefore the plow is required to be equipped with additional working elements. The aim of the study is to create an adaptation to the plow to expand the furrow before laying the next soil layer. In a wide furrow, the formation will completely tip, the previous layer will not interfere with it. The device is a set of vertical shields. Each shield is fixed behind the working body of the plow. It is installed with an angle of attack of 20-25 ° to move the previous layer to expand the furrow by 10-12 cm. The model and industrial samples of the plow have shown improved agrotechnical indicators. The average angle of the formation rotation was 177 °, the burial of plant residues in the soil increased from 61 to 99%. The field surface with blocks more than 5 cm decreased from 36.3 to 13.4%, the height of the ridges decreased from 7 to 4 cm. The force of soil pressure on the shield was measured by a strain gage. It is 130-330 N depending on the depth of processing and the speed of movement. The increase in power costs for the four-hull plow was 190-750 W. The coulters on the plow are unnecessary, and this saves energy more than its increase for shields.

  12. Increasing millet production in South Asia

    International Development Research Centre (IDRC) Digital Library (Canada)

    Asia, which has put the emphasis on cash crops and cereals ... aims to increase production and consumption of minor ... practices. They will then develop sustainable agriculture tool kits to help farmers to increase millet production in these.

  13. Evaluation of tile layer productivity in construction project

    Science.gov (United States)

    Aziz, Hamidi Abdul; Hassan, Siti Hafizan; Rosly, Noorsyalili; Ul-Saufie, Ahmad Zia

    2017-10-01

    Construction is a key sector of the national economy for countries all over the world. Until today, construction industries are still facing lots of problems concerning the low productivity, poor safety and insufficient quality. Labour productivity is one of the factors that will give impact to the quality of projects. This study is focusing on evaluating the tile layer productivity in the area of Seberang Perai, Penang. The objective of this study is to determine the relationship of age and experience of tile layers with their productivity and to evaluate the effect of nationality to tile layers productivity. Interview and site observation of tile layers has been conducted to obtain the data of age, experience and nationality of tile layers. Site observation is made to obtain the number of tiles installed for every tile layer for the duration of 1 hour, and the data were analysed by using Statistical Package for Social Science (IBM SPSS Statistic 23) software. As a result, there is a moderate linear relationship between age and experience of tile layers with their productivity. The age of 30 and the experience of 4 years give the highest productivity. It also can be concluded that the tile layers from Indonesia tend to have higher productivity compared to tile layers from Myanmar.

  14. Microcapsule production by an hybrid colloidosome-layer-by-layer technique

    NARCIS (Netherlands)

    Rossier Miranda, F.J.; Schroën, C.G.P.H.; Boom, R.M.

    2012-01-01

    Although many different methods for microencapsulation are known only some of them had been applied at industrial scale, due to complexity, lack of mechanical strength of the resulting capsules, and the costs related to their production. One of such methods is the electrostatic layer-by-layer (LbL)

  15. Production flush of Agaricus blazei on Brazilian casing layers

    Directory of Open Access Journals (Sweden)

    Nelson Barros Colauto

    2011-06-01

    Full Text Available This study aimed to verify the biological efficiency and production flushes of Agaricus blazei strains on different casing layers during 90 cultivation days. Four casing layers were used: mixture of subsoil and charcoal (VCS, lime schist (LSC, São Paulo peat (SPP and Santa Catarina peat (SCP; and two genetically distant A. blazei strains. The fungus was grown in composted substratum and, after total colonization, a pasteurized casing layer was added over the substratum, and fructification was induced. Mushrooms were picked up daily when the basidiocarp veil was stretched, but before the lamella were exposed. The biological efficiency (BE was determined by the fresh basidiocarp mass divided by the substratum dry mass, expressed in percentage. The production flushes were also determined over time production. The BE and production flushes during 90 days were affected by the strains as well as by the casing layers. The ABL26 and LSC produced the best BE of 60.4%. Although VCS is the most used casing layer in Brazil, it is inferior to other casing layers, for all strains, throughout cultivation time. The strain, not the casing layer, is responsible for eventual variations of the average mushroom mass. In average, circa 50% of the mushroom production occurs around the first month, 30% in the second month, and 20% in third month. The casing layer water management depends on the casing layer type and the strain. Production flush responds better to water reposition, mainly with ABL26, and better porosity to LSC and SCP casing layers.

  16. Layer breeding programmes in changing production environments

    NARCIS (Netherlands)

    LEENSTRA, F.; TEN NAPEL, J.; VISSCHER, J.; VAN SAMBEEK, F.

    2016-01-01

    The housing and management of laying hens and their productivity has gone through enormous developments in the last century. Housing has changed from free-range systems, via battery cages to a variety of loose housing and different types of battery cages, and back to outdoor access systems.

  17. Increasing productivity through Total Reuse Management (TRM)

    Science.gov (United States)

    Schuler, M. P.

    1991-01-01

    Total Reuse Management (TRM) is a new concept currently being promoted by the NASA Langley Software Engineering and Ada Lab (SEAL). It uses concepts similar to those promoted in Total Quality Management (TQM). Both technical and management personnel are continually encouraged to think in terms of reuse. Reuse is not something that is aimed for after a product is completed, but rather it is built into the product from inception through development. Lowering software development costs, reducing risk, and increasing code reliability are the more prominent goals of TRM. Procedures and methods used to adopt and apply TRM are described. Reuse is frequently thought of as only being applicable to code. However, reuse can apply to all products and all phases of the software life cycle. These products include management and quality assurance plans, designs, and testing procedures. Specific examples of successfully reused products are given and future goals are discussed.

  18. Gamma- irradiation to increase crop production

    International Nuclear Information System (INIS)

    Nomai, Matongo

    2000-01-01

    Brief background information on past research activities on the use of Co-60 Gamma Irraditor in production of medical products such as sterilised biological tissue grafts and surgical Gloves and in food preservation.The general results of the application of Radiation Mutation Breeding is discussed from the current research activities involving Beans,Pumpkins,Cotton Seeds,Finger Millet,Wheat,Groundnuts and Rice.The focus is to demonstrate the great potential of the technique in increasing food security

  19. Multi-layered pallet and production method and device therefor

    International Nuclear Information System (INIS)

    Sudo, Shigeru.

    1995-01-01

    The present invention concerns the production of a solid tritium pellet for use in a thermonuclear reactor. A first pellet constituent material constituting an outer layer of the pellet is solidified under cooling to form a solidification product for the pellet. A cave is formed on one end face of the pellet solidification product. A second pellet constituent material constituting an inner layer of the pellet is supplied and solidified under cooling. After scraping a predetermined amount of the other end face of the pellet solidification material, the first pellet constituent material is additionally supplied and solidified under cooling. The size and the relative position of each of layers can be determined definitely and the inner layer can be formed reliably while fuels can be accurately supplied with no loss to a required portion in plasma. (N.H.)

  20. Buried straw layer and plastic mulching increase microlfora diversity in salinized soil

    Institute of Scientific and Technical Information of China (English)

    LI Yu-yi; PANG Huan-cheng; HAN Xiu-fang; YAN Shou-wei; ZHAO Yong-gan; WANG Jing; ZHAI Zhen; ZHANG Jian-li

    2016-01-01

    Salt stress has been increasingly constraining crop productivity in arid lands of the world. In our recent study, salt stress was aleviated and crop productivity was improved remarkably by straw layer burial plus plastic iflm mulching in a saline soil. However, its impact on the microlfora diversity is not wel documented. Field micro-plot experiments were conducted from 2010 to 2011 using four tilage methods: (i) deep tilage with plastic iflm mulching (CK), (i) straw layer burial at 40 cm (S), (ii) straw layer burial plus surface soil mulching with straw material (S+S), and (iv) plastic iflm mulching plus buried straw layer (P+S). Culturable microbes and predominant bacterial communities were studied; based on 16S rDNA, bacterial com-munity structure and abundance were characterized using denaturing gradient gel electrophoresis (DGGE) and polymerase chain reaction (PCR). Results showed that P+S was the most favorable for culturable bacteria, actinomyces and fungi and induced the most diverse genera of bacteria compared to other tilage methods. Soil temperature had signiifcant positive correlations with the number of bacteria, actinomyces and fungi (P<0.01). However, soil water was poorly correlated with any of the microbes. Salt content had a signiifcant negative correlation with the number of microbers, especialy for bacteria and fungi (P<0.01). DGGE analysis showed that the P+S exhibited the highest diversity of bacteria with 20 visible bands folowed by S+S, S and CK. Moreover, P+S had the highest similarity (68%) of bacterial communities with CK. The major bacterial genera in al soil samples wereFirmicutes,Proteobacteria andActinobacteria. Given the considerable increase in microbial growth, the combined use of straw layer burial and plastic iflm mulching could be a practical option for aleviating salt stress effects on soil microbial community and thereby improving crop production in arid saline soils.

  1. Increasing vaccine production using pulsed ultrasound waves.

    Directory of Open Access Journals (Sweden)

    Jida Xing

    Full Text Available Vaccination is a safe and effective approach to prevent deadly diseases. To increase vaccine production, we propose that a mechanical stimulation can enhance protein production. In order to prove this hypothesis, Sf9 insect cells were used to evaluate the increase in the expression of a fusion protein from hepatitis B virus (HBV S1/S2. We discovered that the ultrasound stimulation at a frequency of 1.5 MHz, intensity of 60 mW/cm2, for a duration of 10 minutes per day increased HBV S1/S2 by 27%. We further derived a model for transport through a cell membrane under the effect of ultrasound waves, tested the key assumptions of the model through a molecular dynamics simulation package, NAMD (Nanoscale Molecular Dynamics program and utilized CHARMM force field in a steered molecular dynamics environment. The results show that ultrasound waves can increase cell permeability, which, in turn, can enhance nutrient / waste exchange thus leading to enhanced vaccine production. This finding is very meaningful in either shortening vaccine production time, or increasing the yield of proteins for use as vaccines.

  2. Enhanced precipitation variability decreases grass- and increases shrub-productivity

    Science.gov (United States)

    Gherardi, Laureano A.; Sala, Osvaldo E.

    2015-01-01

    Although projections of precipitation change indicate increases in variability, most studies of impacts of climate change on ecosystems focused on effects of changes in amount of precipitation, overlooking precipitation variability effects, especially at the interannual scale. Here, we present results from a 6-y field experiment, where we applied sequences of wet and dry years, increasing interannual precipitation coefficient of variation while maintaining a precipitation amount constant. Increased precipitation variability significantly reduced ecosystem primary production. Dominant plant-functional types showed opposite responses: perennial-grass productivity decreased by 81%, whereas shrub productivity increased by 67%. This pattern was explained by different nonlinear responses to precipitation. Grass productivity presented a saturating response to precipitation where dry years had a larger negative effect than the positive effects of wet years. In contrast, shrubs showed an increasing response to precipitation that resulted in an increase in average productivity with increasing precipitation variability. In addition, the effects of precipitation variation increased through time. We argue that the differential responses of grasses and shrubs to precipitation variability and the amplification of this phenomenon through time result from contrasting root distributions of grasses and shrubs and competitive interactions among plant types, confirmed by structural equation analysis. Under drought conditions, grasses reduce their abundance and their ability to absorb water that then is transferred to deep soil layers that are exclusively explored by shrubs. Our work addresses an understudied dimension of climate change that might lead to widespread shrub encroachment reducing the provisioning of ecosystem services to society. PMID:26417095

  3. Biofuels versus food production: Does biofuels production increase food prices?

    International Nuclear Information System (INIS)

    Ajanovic, Amela

    2011-01-01

    Rapidly growing fossil energy consumption in the transport sector in the last two centuries caused problems such as increasing greenhouse gas emissions, growing energy dependency and supply insecurity. One approach to solve these problems could be to increase the use of biofuels. Preferred feedstocks for current 1st generation biofuels production are corn, wheat, sugarcane, soybean, rapeseed and sunflowers. The major problem is that these feedstocks are also used for food and feed production. The core objective of this paper is to investigate whether the recent increase of biofuels production had a significant impact on the development of agricultural commodity (feedstock) prices. The most important impact factors like biofuels production, land use, yields, feedstock and crude oil prices are analysed. The major conclusions of this analysis are: In recent years the share of bioenergy-based fuels has increased moderately, but continuously, and so did feedstock production, as well as yields. So far, no significant impact of biofuels production on feedstock prices can be observed. Hence, a co-existence of biofuel and food production seems possible especially for 2nd generation biofuels. However, sustainability criteria should be seriously considered. But even if all crops, forests and grasslands currently not used were used for biofuels production it would be impossible to substitute all fossil fuels used today in transport.

  4. Increasing Product Confidence-Shifting Paradigms.

    Science.gov (United States)

    Phillips, Marla; Kashyap, Vishal; Cheung, Mee-Shew

    2015-01-01

    Leaders in the pharmaceutical, medical device, and food industries expressed a unilateral concern over product confidence throughout the total product lifecycle, an unsettling fact for these leaders to manage given that their products affect the lives of millions of people each year. Fueled by the heparin incident of intentional adulteration in 2008, initial efforts for increasing product confidence were focused on improving the confidence of incoming materials, with a belief that supplier performance must be the root cause. As in the heparin case, concern over supplier performance extended deep into the supply chain to include suppliers of the suppliers-which is often a blind spot for pharmaceutical, device, and food manufacturers. Resolved to address the perceived lack of supplier performance, these U.S. Food and Drug Administration (FDA)-regulated industries began to adopt the supplier relationship management strategy, developed by the automotive industry, that emphasizes "management" of suppliers for the betterment of the manufacturers. Current product and supplier management strategies, however, have not led to a significant improvement in product confidence. As a result of the enduring concern by industry leaders over the lack of product confidence, Xavier University launched the Integrity of Supply Initiative in 2012 with a team of industry leaders and FDA officials. Through a methodical research approach, data generated by the pharmaceutical, medical device, and food manufacturers surprisingly pointed to themselves as a source of the lack of product confidence, and revealed that manufacturers either unknowingly increase the potential for error or can control/prevent many aspects of product confidence failure. It is only through this paradigm shift that manufacturers can work collaboratively with their suppliers as equal partners, instead of viewing their suppliers as "lesser" entities needing to be controlled. The basis of this shift provides manufacturers

  5. Increasing Sales by Developing Production Consortiums.

    Science.gov (United States)

    Smith, Christopher A.; Russo, Robert

    Intended to help rehabilitation facility administrators increase organizational income from manufacturing and/or contracted service sources, this document provides a decision-making model for the development of a production consortium. The document consists of five chapters and two appendices. Chapter 1 defines the consortium concept, explains…

  6. Power Curve Measurements, quantify the production increase

    DEFF Research Database (Denmark)

    Gómez Arranz, Paula; Vesth, Allan

    The purpose of this report is to quantify the production increase on a given turbine with respect to another given turbine. The used methodology is the “side by side” comparison method, provided by the client. This method involves the use of two neighboring turbines and it is based...

  7. Increasing the availability of national mapping products.

    Science.gov (United States)

    Roney, J.I.; Ogilvie, B.C.

    1981-01-01

    A discussion of the means employed by the US Geological Survey to facilitate map usage, covering aspects of project Map Accessibility Program including special rolled and folded map packaging, new market testing, parks and campgrounds program, expanded map dealer program, new booklet-type State sales index and catalog and new USGS map reference code. The USGS is seen as the producer of a tremendous nation-wide inventory of topographic and related map products available in unprecedented types, formats and scales, and as endeavouring to increase access to its products. The new USGS map reference code is appended. -J.C.Stone

  8. Casing layer and effect of primordia induction in the production of Agaricus subrufescens mushroom

    Directory of Open Access Journals (Sweden)

    Emerson Tokuda Martos

    2017-08-01

    Full Text Available Agaricus subrufescens growers have faced difficulties in standardizing and maintaining optimal production yield, even when they produce or acquire quality substrate, as cultivation success is also related to the quality of the casing layer and the production environment. The production of A. subrufescens was evaluated using different casing layers and methods for primordia induction. Three experiments were carried out: 1 to evaluate the effect of dolomitic limestone in the casing layer; 2 to evaluate the effect of different combinations of mineral and organic materials used as the casing layer; and 3 to evaluate the effect of temperature in primordia induction with two commercial strains. The results demonstrated that an increase in the limestone concentration in the casing resulted in a superior yield (16.7%. Casing layer combinations using organic substrate + sand (proportion 1:1, volume to volume resulted in a greater yield (19.2%. Temperature did not affect primordia induction.

  9. An increased 18F radionuclide production

    International Nuclear Information System (INIS)

    Panico, M.; Salvadore, M.; Randazzo, G.; Roma, R.; Green, A.; Calicchio, G.F.

    1999-01-01

    In the 18 F daily preparation a diminished yield of radioisotopic production is often found. This fact, most times, is connected to the altered internal surface of the PEE and teflon lines for the 18 F transferring to the hot cells because of radiations. This anomaly is due to an H 2 18 O insufficient filling into the target. In fact a target foils bombardment causing the release of radioactive Ag+ ions sets in. These ions passing through the transferring line damage it. This problem has been solved by an increased H 2 18 O filling, from 0.7 to 1.3 mL. A further steady increasing in the 18 F production is due to the features of the new target: back plane : integrated in the silver flange; water cooling surface: enlarged with fins; target connections: high pressure fittings. In conclusion a careful filling of the new target has increased the fluorine-18 average daily production from 7.4 GBq to 18.5 GBq, using recovered water (time: thirty minutes; beam: 15 mA) and allows to replace teflon lines every year instead of every three months. (authors)

  10. Continuous production of nanostructured particles using spatial atomic layer deposition

    International Nuclear Information System (INIS)

    Ommen, J. Ruud van; Kooijman, Dirkjan; Niet, Mark de; Talebi, Mojgan; Goulas, Aristeidis

    2015-01-01

    In this paper, the authors demonstrate a novel spatial atomic layer deposition (ALD) process based on pneumatic transport of nanoparticle agglomerates. Nanoclusters of platinum (Pt) of ∼1 nm diameter are deposited onto titania (TiO 2 ) P25 nanoparticles resulting to a continuous production of an active photocatalyst (0.12–0.31 wt. % of Pt) at a rate of about 1 g min −1 . Tuning the precursor injection velocity (10–40 m s −1 ) enhances the contact between the precursor and the pneumatically transported support flows. Decreasing the chemisorption temperature (from 250 to 100 °C) results in more uniform distribution of the Pt nanoclusters as it decreases the reaction rate as compared to the rate of diffusion into the nanoparticle agglomerates. Utilizing this photocatalyst in the oxidation reaction of Acid Blue 9 showed a factor of five increase of the photocatalytic activity compared to the native P25 nanoparticles. The use of spatial particle ALD can be further expanded to deposition of nanoclusters on porous, micron-sized particles and to the production of core–shell nanoparticles enabling the robust and scalable manufacturing of nanostructured powders for catalysis and other applications

  11. Application Protocol, Initial Graphics Exchange Specification (IGES), Layered Electrical Product

    Energy Technology Data Exchange (ETDEWEB)

    O`Connell, L.J. [ed.

    1994-12-01

    An application protocol is an information systems engineering view of a specific product The view represents an agreement on the generic activities needed to design and fabricate the product the agreement on the information needed to support those activities, and the specific constructs of a product data standard for use in transferring some or all of the information required. This application protocol describes the data for electrical and electronic products in terms of a product description standard called the Initial Graphics Exchange Specification (IGES). More specifically, the Layered Electrical Product IGES Application Protocol (AP) specifies the mechanisms for defining and exchanging computer-models and their associated data for those products which have been designed in two dimensional geometry so as to be produced as a series of layers in IGES format The AP defines the appropriateness of the data items for describing the geometry of the various parts of a product (shape and location), the connectivity, and the processing and material characteristics. Excluded is the behavioral requirements which the product was intended to satisfy, except as those requirements have been recorded as design rules or product testing requirements.

  12. Production of IgY by layers injected with Salmonella typhimurium

    Directory of Open Access Journals (Sweden)

    Hee, H. L.

    2017-06-01

    Full Text Available In the present study, production of IgY and performance of layers immunised with Salmonella typhimurium were evaluated. Thirty 23-wk old layers (Lohmann Brown with average body weight of 1.6 � 0.03 kg. were randomly and equally divided into two groups. Both groups were placed in a specific pathogen free room equipped with an exhaust fan. The layers were placed in single battery cages with slightly tilted floor which allowed eggs to roll straight into the collecting tray. Lyophilized, attenuated whole cells of S. typhimurium strain [serotype: Somatic (O, antigen 1, 4, (5, 12, flagella (H N12 phase I: 1; phase II: 1, 2 (Group B] that were emulsified with Freund�s complete adjuvant were used to immunise the layers intramuscularly 3 times at 2-wk interval (treatment group. Layers in the control group were injected with a solution of sterilized phosphate-buffered saline (PBS emulsified with an equal volume of Freund�s complete adjuvant. The experimental period lasted for 14 wks. Specific antibodies were detected by enzyme-linked immunosorbent assay. The results showed that the birds lost weight during the injection period, but the weights slowly increased in the following weeks. However, the weight of layers in the treated group remained lower (P<0.05 when compared to the period before injection. The loss in body weight of layers was the result of reduced feed intake, in particular during the injection weeks. Layers in the control group had a higher egg production, by about 10.1% than layers in the treatment group throughout the experimental period. The egg production for layers in treatment group showed a significant decrease (P<0.05 during the immunization period by 28.8%. The egg production significantly increased (P<0.05 to 71.9% after this period, but the production did not reach the level before immunisation. The weight of eggs of treated layers were significantly lower (P<0.05 than the control layers during the injection weeks. The egg

  13. Outdoor open thin-layer microalgal photobioreactor: potential productivity

    Czech Academy of Sciences Publication Activity Database

    Doucha, Jiří; Lívanský, Karel

    2009-01-01

    Roč. 21, č. 1 (2009), s. 111-117 ISSN 0921-8971 Institutional research plan: CEZ:AV0Z50200510 Keywords : productivity * photobioreactor * thin layer Subject RIV: EE - Microbiology, Virology Impact factor: 1.018, year: 2009

  14. Corrosion product layers on magnesium alloys AZ31 and AZ61: Surface chemistry and protective ability

    Science.gov (United States)

    Feliu, S.; Llorente, I.

    2015-08-01

    This paper studies the chemical composition of the corrosion product layers formed on magnesium alloys AZ31 and AZ61 following immersion in 0.6 M NaCl, with a view to better understanding their protective action. Relative differences in the chemical nature of the layers were quantified by X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), energy dispersive analysis of X-ray (EDX) and low-angle X-ray diffraction (XRD). Corrosion behavior was investigated by Electrochemical Impedance Spectroscopy (EIS) and hydrogen evolution measurement. An inhibitive effect from the corrosion product layers was observed from EIS, principally in the case of AZ31, as confirmed by hydrogen evolution tests. A link was found between carbonate enrichment observed by XPS in the surface of the corrosion product layer, concomitant with the increase in the protective properties observed by EIS.

  15. Towards increased microalgal productivity in photobioreactors

    NARCIS (Netherlands)

    Bosma, R.; Vermuë, M.H.; Tramper, J.; Wijffels, R.H.

    2010-01-01

    Currently there is much interest to cultivate microalgae for the production of bulk products like lipids for biodiesel or as feedstock for industrial chemical processes. To make the production economically feasible, it is essential to develop cultivation systems in which algae convert the light with

  16. (SRI) to Increase Rice Water Productivity

    African Journals Online (AJOL)

    Water Productivity: a Case of Mkindo Irrigation Scheme in. Morogoro ... plots in a randomized complete block design (RCBD) with five treatments based on two water application regimes of ..... green, blue and grey water footprint of crops.

  17. Factors affecting the corrosion of SiC layer by fission product palladium

    International Nuclear Information System (INIS)

    Dewita, E.

    2000-01-01

    HTR is one of the advanced nuclear reactors which has inherent safety system, graphite moderated and helium gas cooled. In general, these reactors are designed with the TRISO coated particle consist of four coating layers that are porous pyrolytic carbon (PyC). inner dense PyC (IPyC), silicon carbide (SiC), and outer dense PyC (OPyC). Among the four coating layers, the SiC plays an important role beside in retaining metallic fission products, it also provides mechanical strength to fuel particle. However, results of post irradiation examination indicate that fission product palladium can react with and corrode SiC layer, This assessment is conducted to get the comprehension about resistance of SiC layer on irradiation effects, especially in order to increase the fuel bum-up. The result of this shows that the corrosion of SiC layer by fission product palladium is beside depend on the material characteristics of SiC, and also there are other factors that affect on the SiC layer corrosion. Fuel enrichment, bum-up, and irradiation time effect on the palladium flux in fuel kernel. While, the fuel density, vapour pressure of palladium (the degree depend on the irradiation temperature and kernel composition) effect on palladium migration in fuel particle. (author)

  18. Corrosion product layers on magnesium alloys AZ31 and AZ61: Surface chemistry and protective ability

    International Nuclear Information System (INIS)

    Feliu, S.; Llorente, I.

    2015-01-01

    Highlights: • Surface chemistry of the corrosion product layers on magnesium alloys. • Influence of the type of alloy on the carbonate surface enrichment. • Relation between surface composition and protection properties. - Abstract: This paper studies the chemical composition of the corrosion product layers formed on magnesium alloys AZ31 and AZ61 following immersion in 0.6 M NaCl, with a view to better understanding their protective action. Relative differences in the chemical nature of the layers were quantified by X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), energy dispersive analysis of X-ray (EDX) and low-angle X-ray diffraction (XRD). Corrosion behavior was investigated by Electrochemical Impedance Spectroscopy (EIS) and hydrogen evolution measurement. An inhibitive effect from the corrosion product layers was observed from EIS, principally in the case of AZ31, as confirmed by hydrogen evolution tests. A link was found between carbonate enrichment observed by XPS in the surface of the corrosion product layer, concomitant with the increase in the protective properties observed by EIS

  19. Corrosion product layers on magnesium alloys AZ31 and AZ61: Surface chemistry and protective ability

    Energy Technology Data Exchange (ETDEWEB)

    Feliu, S., E-mail: sfeliu@cenim.csic.es; Llorente, I.

    2015-08-30

    Highlights: • Surface chemistry of the corrosion product layers on magnesium alloys. • Influence of the type of alloy on the carbonate surface enrichment. • Relation between surface composition and protection properties. - Abstract: This paper studies the chemical composition of the corrosion product layers formed on magnesium alloys AZ31 and AZ61 following immersion in 0.6 M NaCl, with a view to better understanding their protective action. Relative differences in the chemical nature of the layers were quantified by X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), energy dispersive analysis of X-ray (EDX) and low-angle X-ray diffraction (XRD). Corrosion behavior was investigated by Electrochemical Impedance Spectroscopy (EIS) and hydrogen evolution measurement. An inhibitive effect from the corrosion product layers was observed from EIS, principally in the case of AZ31, as confirmed by hydrogen evolution tests. A link was found between carbonate enrichment observed by XPS in the surface of the corrosion product layer, concomitant with the increase in the protective properties observed by EIS.

  20. A Work Schedule to Increase Productivity.

    Science.gov (United States)

    Atwood, Caleb S.

    1979-01-01

    Outlines a technique for making a tight economy and energy shortages more palatable by supplementing employee wage increases with benefits such as alternative three and four day "weekends" without loss of regular pay and by enabling business to increase profits. (Author/IRT)

  1. Sensors Increase Productivity in Harsh Environments

    Science.gov (United States)

    2008-01-01

    California's San Juan Capistrano-based Endevco Corporation licensed three patents covering high-temperature, harsh-environment silicon carbide (Si-C) pressure sensors from Glenn Research Center. The company is exploring their use in government markets, as well as in commercial markets, including commercial jet testing, deep well drilling applications where pressure and temperature increase with drilling depth, and in automobile combustion chambers.

  2. Toward Increasing Micropore Volume between Hybrid Layered Perovskites with Silsesquioxane Interlayers.

    Science.gov (United States)

    Kataoka, Sho; Kamimura, Yoshihiro; Endo, Akira

    2018-04-10

    Hybrid organic-inorganic layered perovskites are typically nonporous solids. However, the incorporation of silsesquioxanes with a cubic cage structure as interlayer materials creates micropores between the perovskite layers. In this study, we increase in the micropore volume in layered perovskites by replacing a portion of the silsesquioxane interlayers with organic amines. In the proposed method, approximately 20% of the silsesquioxane interlayers can be replaced without changing the layer distance owing to the size of the silsesquioxane. When small amines (e.g., ethylamine) are used in this manner, the micropore volume of the obtained hybrid layered perovskites increases by as much as 44%; when large amines (e.g., phenethylamine) are used, their micropore volume decreases by as much as 43%. Through the variation of amine fraction, the micropore volume can be adjusted in the range. Finally, the magnetic moment measurements reveal that the layered perovskites with mixed interlayers exhibit ferromagnetic ordering at temperature below 20 K, thus indicating that the obtained perovskites maintain their functions as layered perovskites.

  3. Production of Transitional Diffused Layers by Electrospark Coating

    Science.gov (United States)

    Smolentsev, Vladislav P.; Boldyrev, Alexander I.; Smolentsev, Evgeniy V.; Boldyrev, Alexander A.; Mozgalin, Vladislav L.

    2018-03-01

    The article presents a new method for production of diffused transitional layers with nano- and microthickness by local removal of nanofilms on aluminum alloys. This allows procuring of high-quality coatings on fusible alloys (for example, on aluminum ones) by materials, the melting point of which is 2-3 times higher than that of the basis (for example, of cast iron). This permits imparting new useful properties to workpieces made from light alloys with decent values for electrochemical working. The authors show that application of coatings provides minimum heating of workpieces. This enables the regulation in temperature condition of operating environment and permits efficiency improving during the process of electrochemical working by means of higher density current supply.

  4. Yankee links computing needs, increases productivity

    International Nuclear Information System (INIS)

    Anon.

    1994-01-01

    Yankee Atomic Electric Company provides design and consultation services to electric utility companies that operate nuclear power plants. This means bringing together the skills and talents of more than 500 people in many disciplines, including computer-aided design, human resources, financial services, and nuclear engineering. The company was facing a problem familiar to many companies in the nuclear industry.Key corporate data and applications resided on UNIX or other types of computer systems, but most users at Yankee had personal computers on their desks. How could Yankee enable the PC users to share the data, applications, and resources of the larger computing environment such as UNIX, while ensuring they could still use their favorite PC applications? The solution was PC-NFS from Sunsoft, of Chelmsford, Mass., which links PCs to UNIX and other systems. The Yankee computing story is an example of computer downsizing-the trend of moving away from mainframe computers in favor of lower-cost, more flexible client/server computing. Today, Yankee Atomic has more than 350 PCs on desktops throughout the company, using PC-NFS, which enables them t;o use the data, applications, disks, and printers of the FUNIX server systems. This new client/server environment has reduced Yankee's computing costs while increasing its computing power and its ability to respond to customers

  5. Increase of the blocking temperature of Fe–Ag granular multilayers with increasing number of the layers

    Energy Technology Data Exchange (ETDEWEB)

    Balogh, Judit [Institute for Solid State Physics and Optics, Wigner Research Centre for Physics, Hungarian Academy of Sciences, P.O. Box 49, H-1525 Budapest (Hungary); Kaptás, Dénes, E-mail: kaptas.denes@wigner.mta.hu [Institute for Solid State Physics and Optics, Wigner Research Centre for Physics, Hungarian Academy of Sciences, P.O. Box 49, H-1525 Budapest (Hungary); Kiss, László F. [Institute for Solid State Physics and Optics, Wigner Research Centre for Physics, Hungarian Academy of Sciences, P.O. Box 49, H-1525 Budapest (Hungary); Dézsi, István [Institute for Particle and Nuclear Physics, Wigner Research Centre for Physics, Hungarian Academy of Sciences, P.O. Box 49, H-1525 Budapest (Hungary); Nakanishi, Akio [Department of Physics, Shiga University of Medical Science, Shiga 520-2192 (Japan); Devlin, Eamonn; Vasilakaki, Marianna; Margaris, George; Trohidou, Kalliopi N. [Institute of Nanoscience and Nanotechnology, NCSR “Demokritos”, Aghia Paraskevi, 15310 Athens (Greece)

    2016-03-01

    Multilayers of 0.4 nm Fe and 5 nm Ag with repetition number, n=1, 2, 5, 10 and 20 were prepared by vacuum evaporation onto Si wafer. The blocking temperature was determined by measuring the field cooled and zero field cooled magnetization curves with a SQUID magnetometer and it was found to increase by almost an order of magnitude from around 20 K for the single Fe layer sample up to around 160 K for n=20. Significant increase of the average size of the superparamagnetic Fe grains by increasing the number of the Fe layers was excluded by conversion electron Mössbauer spectroscopy measurements of the paramagnetic state. The role of the dipole–dipole interactions and their interplay with the out-of-plain magnetic anisotropy in the variation of the blocking temperature has been investigated by Monte-Carlo simulations. - Highlights: • Multilayers of [0.4 nm Fe/5 nm Ag]{sub n} (n=1,2,5,10, and 20) were grown over Si. • Large increase of the superparamagnetic blocking temperature up to n=10 is observed. • The average Fe grain size does not change in the subsequent layers. • Perpendicular anisotropy enhances the dipolar coupling and the blocking temperature.

  6. Responses of plant available water and forest productivity to variably layered coarse textured soils

    Science.gov (United States)

    Huang, Mingbin; Barbour, Lee; Elshorbagy, Amin; Si, Bing; Zettl, Julie

    2010-05-01

    Reforestation is a primary end use for reconstructed soils following oil sands mining in northern Alberta, Canada. Limited soil water conditions strongly restrict plant growth. Previous research has shown that layering of sandy soils can produce enhanced water availability for plant growth; however, the effect of gradation on these enhancements is not well defined. The objective of this study was to evaluate the effect of soil texture (gradation and layering) on plant available water and consequently on forest productivity for reclaimed coarse textured soils. A previously validated system dynamics (SD) model of soil moisture dynamics was coupled with ecophysiological and biogeochemical processes model, Biome-BGC-SD, to simulate forest dynamics for different soil profiles. These profiles included contrasting 50 cm textural layers of finer sand overlying coarser sand in which the sand layers had either a well graded or uniform soil texture. These profiles were compared to uniform profiles of the same sands. Three tree species of jack pine (Pinus banksiana Lamb.), white spruce (Picea glauce Voss.), and trembling aspen (Populus tremuloides Michx.) were simulated using a 50 year climatic data base from northern Alberta. Available water holding capacity (AWHC) was used to identify soil moisture regime, and leaf area index (LAI) and net primary production (NPP) were used as indices of forest productivity. Published physiological parameters were used in the Biome-BGC-SD model. Relative productivity was assessed by comparing model predictions to the measured above-ground biomass dynamics for the three tree species, and was then used to study the responses of forest leaf area index and potential productivity to AWHC on different soil profiles. Simulated results indicated soil layering could significantly increase AWHC in the 1-m profile for coarse textured soils. This enhanced AWHC could result in an increase in forest LAI and NPP. The increased extent varied with soil

  7. Innovative layer genetics to handle global challenges in egg production.

    Science.gov (United States)

    Preisinger, Rudolf

    2018-02-01

    1. In commercial layer breeding, extensive gene pools are tested and selected for market requirements which must be anticipated at least 5 years ahead. Field results confirm a continuous positive genetic trend in egg output and better feed efficiency which can be converted into land savings. 2. Animal welfare and cage-free housing dominate future needs of the market. Nesting behaviour and minimal tendency to develop feather-pecking or cannibalism without beak treatment are key trait complexes. Stronger shells for longer production cycles without moulting have to be combined with better bones. 3. No single big gene effect can be expected to control the multifactorial problem of feather-pecking. Adjusting the shape of the beak, with a heritability of .10-.25, can contribute to reducing the risk of severe cannibalism. 4. For better skeletal integrity, the assessment of bone quality in pedigree birds housed in enriched cages is done by keel bone palpation or ultrasound measurement of the humerus. Both traits show similar heritabilities in the range of .15-.30 and can be included in a balanced selection approach for performance, quality and welfare traits. 5. The combination of performance testing and genome-wide DNA marker analysis is a promising tool to generate more progress for a balanced performance and behaviour profile.

  8. Production and integration of the ATLAS Insertable B-Layer

    Science.gov (United States)

    Abbott, B.; Albert, J.; Alberti, F.; Alex, M.; Alimonti, G.; Alkire, S.; Allport, P.; Altenheiner, S.; Ancu, L. S.; Anderssen, E.; Andreani, A.; Andreazza, A.; Axen, B.; Arguin, J.; Backhaus, M.; Balbi, G.; Ballansat, J.; Barbero, M.; Barbier, G.; Bassalat, A.; Bates, R.; Baudin, P.; Battaglia, M.; Beau, T.; Beccherle, R.; Bell, A.; Benoit, M.; Bermgan, A.; Bertsche, C.; Bertsche, D.; Bilbao de Mendizabal, J.; Bindi, F.; Bomben, M.; Borri, M.; Bortolin, C.; Bousson, N.; Boyd, R. G.; Breugnon, P.; Bruni, G.; Brossamer, J.; Bruschi, M.; Buchholz, P.; Budun, E.; Buttar, C.; Cadoux, F.; Calderini, G.; Caminada, L.; Capeans, M.; Carney, R.; Casse, G.; Catinaccio, A.; Cavalli-Sforza, M.; Červ, M.; Cervelli, A.; Chau, C. C.; Chauveau, J.; Chen, S. P.; Chu, M.; Ciapetti, M.; Cindro, V.; Citterio, M.; Clark, A.; Cobal, M.; Coelli, S.; Collot, J.; Crespo-Lopez, O.; Dalla Betta, G. F.; Daly, C.; D'Amen, G.; Dann, N.; Dao, V.; Darbo, G.; DaVia, C.; David, P.; Debieux, S.; Delebecque, P.; De Lorenzi, F.; de Oliveira, R.; Dette, K.; Dietsche, W.; Di Girolamo, B.; Dinu, N.; Dittus, F.; Diyakov, D.; Djama, F.; Dobos, D.; Dondero, P.; Doonan, K.; Dopke, J.; Dorholt, O.; Dube, S.; Dzahini, D.; Egorov, K.; Ehrmann, O.; Einsweiler, K.; Elles, S.; Elsing, M.; Eraud, L.; Ereditato, A.; Eyring, A.; Falchieri, D.; Falou, A.; Fausten, C.; Favareto, A.; Favre, Y.; Feigl, S.; Fernandez Perez, S.; Ferrere, D.; Fleury, J.; Flick, T.; Forshaw, D.; Fougeron, D.; Franconi, L.; Gabrielli, A.; Gaglione, R.; Gallrapp, C.; Gan, K. K.; Garcia-Sciveres, M.; Gariano, G.; Gastaldi, T.; Gavrilenko, I.; Gaudiello, A.; Geffroy, N.; Gemme, C.; Gensolen, F.; George, M.; Ghislain, P.; Giangiacomi, N.; Gibson, S.; Giordani, M. P.; Giugni, D.; Gjersdal, H.; Glitza, K. W.; Gnani, D.; Godlewski, J.; Gonella, L.; Gonzalez-Sevilla, S.; Gorelov, I.; Gorišek, A.; Gössling, C.; Grancagnolo, S.; Gray, H.; Gregor, I.; Grenier, P.; Grinstein, S.; Gris, A.; Gromov, V.; Grondin, D.; Grosse-Knetter, J.; Guescini, F.; Guido, E.; Gutierrez, P.; Hallewell, G.; Hartman, N.; Hauck, S.; Hasi, J.; Hasib, A.; Hegner, F.; Heidbrink, S.; Heim, T.; Heinemann, B.; Hemperek, T.; Hessey, N. P.; Hetmánek, M.; Hinman, R. R.; Hoeferkamp, M.; Holmes, T.; Hostachy, J.; Hsu, S. C.; Hügging, F.; Husi, C.; Iacobucci, G.; Ibragimov, I.; Idarraga, J.; Ikegami, Y.; Ince, T.; Ishmukhametov, R.; Izen, J. M.; Janoška, Z.; Janssen, J.; Jansen, L.; Jeanty, L.; Jensen, F.; Jentzsch, J.; Jezequel, S.; Joseph, J.; Kagan, H.; Kagan, M.; Karagounis, M.; Kass, R.; Kastanas, A.; Kenney, C.; Kersten, S.; Kind, P.; Klein, M.; Klingenberg, R.; Kluit, R.; Kocian, M.; Koffeman, E.; Korchak, O.; Korolkov, I.; Kostyukhina-Visoven, I.; Kovalenko, S.; Kretz, M.; Krieger, N.; Krüger, H.; Kruth, A.; Kugel, A.; Kuykendall, W.; La Rosa, A.; Lai, C.; Lantzsch, K.; Lapoire, C.; Laporte, D.; Lari, T.; Latorre, S.; Leyton, M.; Lindquist, B.; Looper, K.; Lopez, I.; Lounis, A.; Lu, Y.; Lubatti, H. J.; Maeland, S.; Maier, A.; Mallik, U.; Manca, F.; Mandelli, B.; Mandić, I.; Marchand, D.; Marchiori, G.; Marx, M.; Massol, N.; Mättig, P.; Mayer, J.; McGoldrick, G.; Mekkaoui, A.; Menouni, M.; Menu, J.; Meroni, C.; Mesa, J.; Michal, S.; Miglioranzi, S.; Mikuž, M.; Miucci, A.; Mochizuki, K.; Monti, M.; Moore, J.; Morettini, P.; Morley, A.; Moss, J.; Muenstermann, D.; Murray, P.; Nakamura, K.; Nellist, C.; Nelson, D.; Nessi, M.; Nisius, R.; Nordberg, M.; Nuiry, F.; Obermann, T.; Ockenfels, W.; Oide, H.; Oriunno, M.; Ould-Saada, F.; Padilla, C.; Pangaud, P.; Parker, S.; Pelleriti, G.; Pernegger, H.; Piacquadio, G.; Picazio, A.; Pohl, D.; Polini, A.; Pons, X.; Popule, J.; Portell Bueso, X.; Potamianos, K.; Povoli, M.; Puldon, D.; Pylypchenko, Y.; Quadt, A.; Quayle, B.; Rarbi, F.; Ragusa, F.; Rambure, T.; Richards, E.; Riegel, C.; Ristic, B.; Rivière, F.; Rizatdinova, F.; RØhne, O.; Rossi, C.; Rossi, L. P.; Rovani, A.; Rozanov, A.; Rubinskiy, I.; Rudolph, M. S.; Rummler, A.; Ruscino, E.; Sabatini, F.; Salek, D.; Salzburger, A.; Sandaker, H.; Sannino, M.; Sanny, B.; Scanlon, T.; Schipper, J.; Schmidt, U.; Schneider, B.; Schorlemmer, A.; Schroer, N.; Schwemling, P.; Sciuccati, A.; Seidel, S.; Seiden, A.; Šícho, P.; Skubic, P.; Sloboda, M.; Smith, D. S.; Smith, M.; Sood, A.; Spencer, E.; Stramaglia, M.; Strauss, M.; Stucci, S.; Stugu, B.; Stupak, J.; Styles, N.; Su, D.; Takubo, Y.; Tassan, J.; Teng, P.; Teixeira, A.; Terzo, S.; Therry, X.; Todorov, T.; Tomášek, M.; Toms, K.; Travaglini, R.; Trischuk, W.; Troncon, C.; Troska, G.; Tsiskaridze, S.; Tsurin, I.; Tsybychev, D.; Unno, Y.; Vacavant, L.; Verlaat, B.; Vigeolas, E.; Vogt, M.; Vrba, V.; Vuillermet, R.; Wagner, W.; Walkowiak, W.; Wang, R.; Watts, S.; Weber, M. S.; Weber, M.; Weingarten, J.; Welch, S.; Wenig, S.; Wensing, M.; Wermes, N.; Wittig, T.; Wittgen, M.; Yildizkaya, T.; Yang, Y.; Yao, W.; Yi, Y.; Zaman, A.; Zaidan, R.; Zeitnitz, C.; Ziolkowski, M.; Zivkovic, V.; Zoccoli, A.; Zwalinski, L.

    2018-05-01

    During the shutdown of the CERN Large Hadron Collider in 2013-2014, an additional pixel layer was installed between the existing Pixel detector of the ATLAS experiment and a new, smaller radius beam pipe. The motivation for this new pixel layer, the Insertable B-Layer (IBL), was to maintain or improve the robustness and performance of the ATLAS tracking system, given the higher instantaneous and integrated luminosities realised following the shutdown. Because of the extreme radiation and collision rate environment, several new radiation-tolerant sensor and electronic technologies were utilised for this layer. This paper reports on the IBL construction and integration prior to its operation in the ATLAS detector.

  9. Diffusion layer characteristics for increasing the performance of activated carbon air cathodes in microbial fuel cells

    KAUST Repository

    Zhang, Xiaoyuan; He, Weihua; Yang, Wulin; Liu, Jia; Wang, Qiuying; Liang, Peng; Huang, Xia; Logan, Bruce E.

    2016-01-01

    The characteristics of several different types of diffusion layers were systematically examined to improve the performance of activated carbon air cathodes used in microbial fuel cells (MFCs). A diffusion layer of carbon black and polytetrafluoroethylene (CB + PTFE) that was pressed onto a stainless steel mesh current collector achieved the highest cathode performance. This cathode also had a high oxygen mass transfer coefficient and high water pressure tolerance (>2 m), and it had the highest current densities in abiotic chronoamperometry tests compared to cathodes with other diffusion layers. In MFC tests, this cathode also produced maximum power densities (1610 ± 90 mW m−2) that were greater than those of cathodes with other diffusion layers, by 19% compared to Gore-Tex (1350 ± 20 mW m−2), 22% for a cloth wipe with PDMS (1320 ± 70 mW m−2), 45% with plain PTFE (1110 ± 20 mW m−2), and 19% higher than those of cathodes made with a Pt catalyst and a PTFE diffusion layer (1350 ± 50 mW m−2). The highly porous diffusion layer structure of the CB + PTFE had a relatively high oxygen mass transfer coefficient (1.07 × 10−3 cm s−1) which enhanced oxygen transport to the catalyst. The addition of CB enhanced cathode performance by increasing the conductivity of the diffusion layer. Oxygen mass transfer coefficient, water pressure tolerance, and the addition of conductive particles were therefore critical features for achieving higher performance AC air cathodes.

  10. A method of increasing the depth of the plastically deformed layer in the roller burnishing process

    Science.gov (United States)

    Kowalik, Marek; Trzepiecinski, Tomasz

    2018-05-01

    The subject of this paper is an analysis of the determination of the depth of the plastically deformed layer in the process of roller burnishing a shaft using a newly developed method in which a braking moment is applied to the roller. It is possible to increase the depth of the plastically deformed layer by applying the braking moment to the roller during the burnishing process. The theoretical considerations presented are based on the Hertz-Bielayev and Huber-Mises theories and permit the calculation of the depth of plastic deformation of the top layer of the burnished shaft. The theoretical analysis has been verified experimentally and using numerical calculations based on the finite element method using the Msc.MARC program. Experimental tests were carried out on ring-shaped samples made of C45 carbon steel. The samples were burnished at different values of roller force and different values of braking moment. A significant increase was found in the depth of the plastically deformed surface layer of roller burnished shafts. Usage of the phenomenon of strain hardening of steel allows the technology presented here to increase the fatigue life of the shafts.

  11. Status epilepticus increases mature granule cells in the molecular layer of the dentate gyrus in rats★

    Science.gov (United States)

    Liang, Zhaoliang; Gao, Fei; Wang, Fajun; Wang, Xiaochen; Song, Xinyu; Liu, Kejing; Zhan, Ren-Zhi

    2013-01-01

    Enhanced neurogenesis in the dentate gyrus of the hippocampus following seizure activity, especially status epilepticus, is associated with ectopic residence and aberrant integration of newborn granule cells. Hilar ectopic granule cells may be detrimental to the stability of dentate circuitry by means of their electrophysiological properties and synaptic connectivity. We hypothesized that status epilepticus also increases ectopic granule cells in the molecular layer. Status epilepticus was induced in male Sprague-Dawley rats by intraperitoneal injection of pilocarpine. Immunostaining showed that many doublecortin-positive cells were present in the molecular layer and the hilus 7 days after the induction of status epilepticus. At least 10 weeks after status epilepticus, the estimated number of cells positive for both prospero homeobox protein 1 and neuron-specific nuclear protein in the hilus was significantly increased. A similar trend was also found in the molecular layer. These findings indicate that status epilepticus can increase the numbers of mature and ectopic newborn granule cells in the molecular layer. PMID:25206705

  12. Comparative Analysis of Profitability of Layers Production in Esan ...

    African Journals Online (AJOL)

    MICHAEL HORSFALL

    KEY WORDS: Day old Chicks, Gross Margin, old layers, Point of lay, Profitability, Rate of return, Viability. ABSTRACT: This ... People depend on poultry for food and poultry farming serves as an additional ..... Wholesales Marketing of Tomato.

  13. Production and Preservation of Sulfide Layering in Mercury's Magma Ocean

    Science.gov (United States)

    Boukare, C.-E.; Parman, S. W.; Parmentier, E. M.; Anzures, B. A.

    2018-05-01

    Mercury's magma ocean (MMO) would have been sulfur-rich. At some point during MMO solidification, it likely became sulfide saturated. Here we present physiochemical models exploring sulfide layer formation and stability.

  14. A chip-type thin-layer electrochemical cell coupled with capillary electrophoresis for online separation of electrode reaction products

    Energy Technology Data Exchange (ETDEWEB)

    He, Jian-Bo, E-mail: jbhe@hfut.edu.cn; Cui, Ting; Zhang, Wen-Wen; Deng, Ning

    2013-07-05

    Graphical abstract: -- Highlights: •A new coupling of thin-layer electrolysis with capillary electrophoresis (CE). •Rapid electrolysis, direct sampling followed by online CE separation. •At least 13 products of quercetin oxidation were separated. •Thermodynamic and kinetic parameters were determined from CE peak areas. -- Abstract: A coupling technique of thin-layer electrolysis with high-performance capillary electrophoresis/UV–vis technique(EC/HPCE/UV–vis) is developed for online separation and determination of electrode reaction products. A chip-type thin-layer electrolytic (CTE) cell was designed and fabricated, which contains a capillary channel and a background electrolyte reservoir, allowing rapid electrolysis, direct sampling and online electrophoretic separation. This chip-type setup was characterized based on an electrophoresis expression of Nernst equation that was applied to the redox equilibrium of o-tolidine at different potentials. The utility of the method was demonstrated by separating and determining the electro-oxidation products of quercetin in different pH media. Two main products were always found in the studied time, potential and pH ranges. The variety of products increased not only with increasing potential but also with increasing pH value, and in total, at least 13 products were observed in the electropherograms. This work illustrates a novel example of capillary electrophoresis used online with thin-layer electrolysis to separate and detect electrode reaction products.

  15. A chip-type thin-layer electrochemical cell coupled with capillary electrophoresis for online separation of electrode reaction products

    International Nuclear Information System (INIS)

    He, Jian-Bo; Cui, Ting; Zhang, Wen-Wen; Deng, Ning

    2013-01-01

    Graphical abstract: -- Highlights: •A new coupling of thin-layer electrolysis with capillary electrophoresis (CE). •Rapid electrolysis, direct sampling followed by online CE separation. •At least 13 products of quercetin oxidation were separated. •Thermodynamic and kinetic parameters were determined from CE peak areas. -- Abstract: A coupling technique of thin-layer electrolysis with high-performance capillary electrophoresis/UV–vis technique(EC/HPCE/UV–vis) is developed for online separation and determination of electrode reaction products. A chip-type thin-layer electrolytic (CTE) cell was designed and fabricated, which contains a capillary channel and a background electrolyte reservoir, allowing rapid electrolysis, direct sampling and online electrophoretic separation. This chip-type setup was characterized based on an electrophoresis expression of Nernst equation that was applied to the redox equilibrium of o-tolidine at different potentials. The utility of the method was demonstrated by separating and determining the electro-oxidation products of quercetin in different pH media. Two main products were always found in the studied time, potential and pH ranges. The variety of products increased not only with increasing potential but also with increasing pH value, and in total, at least 13 products were observed in the electropherograms. This work illustrates a novel example of capillary electrophoresis used online with thin-layer electrolysis to separate and detect electrode reaction products

  16. CAD/CAM: improved design quality, increased productivity

    Energy Technology Data Exchange (ETDEWEB)

    Evans, D. E.; England, J.

    1980-01-01

    Maintaining productivity levels while assuring the quality of engineering products grows increasingly more difficult and costly for industries such as the energy industry which are heavily committed to product design. The man/machine interface made possible through the development of computer-aided design/computer-aided manufacturing (CAD/CAM) technology can be applied to the design process as a tool for increased control to assure the quality of the final engineering product. The quality-control aspects of CAD/CAM technology are addressed in this presentation.

  17. Increasing the radiation resistance of single-crystal silicon epitaxial layers

    Directory of Open Access Journals (Sweden)

    Kurmashev Sh. D.

    2014-12-01

    Full Text Available The authors investigate the possibility of increasing the radiation resistance of silicon epitaxial layers by creating radiation defects sinks in the form of dislocation networks of the density of 109—1012 m–2. Such networks are created before the epitaxial layer is applied on the front surface of the silicon substrate by its preliminary oxidation and subsequent etching of the oxide layer. The substrates were silicon wafers KEF-4.5 and KDB-10 with a diameter of about 40 mm, grown by the Czochralski method. Irradiation of the samples was carried out using electron linear accelerator "Electronics" (ЭЛУ-4. Energy of the particles was 2,3—3,0 MeV, radiation dose 1015—1020 m–2, electron beam current 2 mA/m2. It is shown that in structures containing dislocation networks, irradiation results in reduction of the reverse currents by 5—8 times and of the density of defects by 5—10 times, while the mobility of the charge carriers is increased by 1,2 times. Wafer yield for operation under radiation exposure, when the semiconductor structures are formed in the optimal mode, is increased by 7—10% compared to the structures without dislocation networks. The results obtained can be used in manufacturing technology for radiation-resistant integrated circuits (bipolar, CMOS, BiCMOS, etc..

  18. Russian crude-oil production and export still increasing

    International Nuclear Information System (INIS)

    Purho, P.

    2001-01-01

    Russian crude-oil production is still increasing. In 2000 the annual production 6.48 mb/d was about 6% higher than a year before. In 2001 the production is expected to rise near the level 7 mb/d, so the increase in production volume is fast. However, the production is still far away from the maximum level of the former Soviet Union, 12 mb/d. At the moment Russia is the second largest oil producer right after Saudi Arabia. The increase in production is based on intensified use of old oil fields caused by improved technology. The oil export of Russia far abroad in 2000 was 2.5 mb/d and near abroad into FSU countries only about 180 000 b/d. The recent export of crude-oil has been near the maximum export capacity corresponding to 2.7 mb/d. About 61 million tons of oil products were exported in 2000, and even the export of oil products is increasing. Most of this was gas oil and heavy fuel oil, but also the export of gasoline was significant. The export of oil and oil products is mainly based on shipments, but also the share of train transport is high. Nearly all the crude oil is transported west either by ships or via pipelines. The share of railway transport is only few percents. Russia will continue its own oil pumping policy despite of the appeals of OPEC for reduction of oil production. Opinion in Russia is that if the increase of production and export serves the interests of Russia, it will also be carried out. The target value for crude oil for 2002 is 22 USD per barrel. The Russian crude oil production is estimated to grow up to 7.4 - 8.4 mb/d by the year 2010

  19. Crossbreeding to increase beef production: additive and non ...

    African Journals Online (AJOL)

    GScholtz

    2013-06-06

    Jun 6, 2013 ... Crossbreeding to increase beef production: additive and non-additive effects on weight traits ... total weight of weaned calves. ... Weight traits are not all equally important to efficiency ... values to model total herd productivity. ..... The maintenance requirement of a cow is affected by her weight: the larger the.

  20. Engineering microorganisms to increase ethanol production by metabolic redirection

    Science.gov (United States)

    Deng, Yu; Olson, Daniel G.; van Dijken, Johannes Pieter; Shaw, IV, Arthur J.; Argyros, Aaron; Barrett, Trisha; Caiazza, Nicky; Herring, Christopher D.; Rogers, Stephen R.; Agbogbo, Frank

    2017-10-31

    The present invention provides for the manipulation of carbon flux in a recombinant host cell to increase the formation of desirable products. The invention relates to cellulose-digesting organisms that have been genetically modified to allow the production of ethanol at a high yield by redirecting carbon flux at key steps of central metabolism.

  1. Greywater, greenhouses increase food production in Tunisia | IDRC ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    2011-05-13

    May 13, 2011 ... Research shows how cities and agriculture can grow together. ... sources of water for irrigation would be deployed to increase agricultural production. ... Following Tunisia's strict wastewater use regulation, it was used to grow ...

  2. Evolution of the Raman spectra from single-, few-, and many-layer graphene with increasing disorder

    International Nuclear Information System (INIS)

    Martins Ferreira, E. H.; Stavale, F.; Moutinho, Marcus V. O.; Lucchese, M. M.; Capaz, Rodrigo B.; Achete, C. A.; Jorio, A.

    2010-01-01

    We report on the micro-Raman spectroscopy of monolayer, bilayer, trilayer, and many layers of graphene (graphite) bombarded by low-energy argon ions with different doses. The evolution of peak frequencies, intensities, linewidths, and areas of the main Raman bands of graphene is analyzed as function of the distance between defects and number of layers. We describe the disorder-induced frequency shifts and the increase in the linewidth of the Raman bands by means of a spatial-correlation model. Also, the evolution of the relative areas A D /A G , A D ' /A G , and A G ' /A G is described by a phenomenological model. The present results can be used to fully characterize disorder in graphene systems.

  3. Increasing low frequency sound attenuation using compounded single layer of sonic crystal

    Science.gov (United States)

    Gulia, Preeti; Gupta, Arpan

    2018-05-01

    Sonic crystals (SC) are man-made periodic structures where sound hard scatterers are arranged in a crystalline manner. SC reduces noise in a particular range of frequencies called as band gap. Sonic crystals have a promising application in noise shielding; however, the application is limited due to the size of structure. Particularly for low frequencies, the structure becomes quite bulky, restricting its practical application. This paper presents a compounded model of SC, which has the same overall area and filling fraction but with increased low frequency sound attenuation. Two cases have been considered, a three layer SC and a compounded single layer SC. Both models have been analyzed using finite element simulation and plane wave expansion method. Band gaps for periodic structures have been obtained using both methods which are in good agreement. Further, sound transmission loss has been evaluated using finite element method. The results demonstrate the use of compounded model of Sonic Crystal for low frequency sound attenuation.

  4. POSSIBILITIES OF INCREASING EFFICIENCY WITHIN SERIAL PRODUCTION MANAGEMENT

    Directory of Open Access Journals (Sweden)

    CODRUŢA DURA

    2010-01-01

    Full Text Available Under the impact of transition to the new post-industrial society, massproduction recently faced the most numerous difficulties. They are caused by turbulences in theexternal environment in which companies operate, manifested in particular by enhancing thedynamism of markets and by deep changes in the structure of consumers’ demands. In thiscontext, specialized literature records the concerns for increasing the efficiency and flexibilityof products, elements involving radical changes of management and manufacturingtechnologies methods. Given these issues, the paper approaches two separate ways to improvethe management of serial production: increasing economic efficiency by optimizing the size ofbatches and flexible production systems by implementing techniques to reduce the change-overtime.

  5. Biodiversity increases the resistance of ecosystem productivity to climate extremes.

    Science.gov (United States)

    Isbell, Forest; Craven, Dylan; Connolly, John; Loreau, Michel; Schmid, Bernhard; Beierkuhnlein, Carl; Bezemer, T Martijn; Bonin, Catherine; Bruelheide, Helge; de Luca, Enrica; Ebeling, Anne; Griffin, John N; Guo, Qinfeng; Hautier, Yann; Hector, Andy; Jentsch, Anke; Kreyling, Jürgen; Lanta, Vojtěch; Manning, Pete; Meyer, Sebastian T; Mori, Akira S; Naeem, Shahid; Niklaus, Pascal A; Polley, H Wayne; Reich, Peter B; Roscher, Christiane; Seabloom, Eric W; Smith, Melinda D; Thakur, Madhav P; Tilman, David; Tracy, Benjamin F; van der Putten, Wim H; van Ruijven, Jasper; Weigelt, Alexandra; Weisser, Wolfgang W; Wilsey, Brian; Eisenhauer, Nico

    2015-10-22

    It remains unclear whether biodiversity buffers ecosystems against climate extremes, which are becoming increasingly frequent worldwide. Early results suggested that the ecosystem productivity of diverse grassland plant communities was more resistant, changing less during drought, and more resilient, recovering more quickly after drought, than that of depauperate communities. However, subsequent experimental tests produced mixed results. Here we use data from 46 experiments that manipulated grassland plant diversity to test whether biodiversity provides resistance during and resilience after climate events. We show that biodiversity increased ecosystem resistance for a broad range of climate events, including wet or dry, moderate or extreme, and brief or prolonged events. Across all studies and climate events, the productivity of low-diversity communities with one or two species changed by approximately 50% during climate events, whereas that of high-diversity communities with 16-32 species was more resistant, changing by only approximately 25%. By a year after each climate event, ecosystem productivity had often fully recovered, or overshot, normal levels of productivity in both high- and low-diversity communities, leading to no detectable dependence of ecosystem resilience on biodiversity. Our results suggest that biodiversity mainly stabilizes ecosystem productivity, and productivity-dependent ecosystem services, by increasing resistance to climate events. Anthropogenic environmental changes that drive biodiversity loss thus seem likely to decrease ecosystem stability, and restoration of biodiversity to increase it, mainly by changing the resistance of ecosystem productivity to climate events.

  6. Increased wood-fiber production: technology, economics, and ecology

    Science.gov (United States)

    William R. Bentley

    1973-01-01

    Forest tree improvement is a form of technological change, and it should be viewed as such. The economic objective of technological change is to increase productivity per dollar invested. This is accomplished through selection and breeding for increased growth rates or reduced losses to insects and disease. Programs which yield improved planting stock make forest...

  7. A Two-Layer Gene Circuit for Decoupling Cell Growth from Metabolite Production.

    Science.gov (United States)

    Lo, Tat-Ming; Chng, Si Hui; Teo, Wei Suong; Cho, Han-Saem; Chang, Matthew Wook

    2016-08-01

    We present a synthetic gene circuit for decoupling cell growth from metabolite production through autonomous regulation of enzymatic pathways by integrated modules that sense nutrient and substrate. The two-layer circuit allows Escherichia coli to selectively utilize target substrates in a mixed pool; channel metabolic resources to growth by delaying enzymatic conversion until nutrient depletion; and activate, terminate, and re-activate conversion upon substrate availability. We developed two versions of controller, both of which have glucose nutrient sensors but differ in their substrate-sensing modules. One controller is specific for hydroxycinnamic acid and the other for oleic acid. Our hydroxycinnamic acid controller lowered metabolic stress 2-fold and increased the growth rate 2-fold and productivity 5-fold, whereas our oleic acid controller lowered metabolic stress 2-fold and increased the growth rate 1.3-fold and productivity 2.4-fold. These results demonstrate the potential for engineering strategies that decouple growth and production to make bio-based production more economical and sustainable. Copyright © 2016 The Authors. Published by Elsevier Inc. All rights reserved.

  8. White Rose development plan amendment production volume increase

    International Nuclear Information System (INIS)

    2006-09-01

    In January 2001, Husky Oil Operations Limited (Husky), in joint-venture with Petro-Canada, submitted a Benefits Plan for the White Rose Development to the Canada- Newfoundland and Labrador Offshore Petroleum Board (C-NLOPB). This revised document provided the case for requesting an increase in the facility maximum daily production rate and the average annual production rate for the White Rose field from 100,000 barrels per day (bpd) as stated in the approved White Rose Development Plan to 140,000 bpd. In order to determine the potential for increasing oil production through the Floating Production, Storage and Offloading (FPSO) vessel, two things were considered, namely the proper reservoir management of the White Rose field to ensure optimum resource recovery, and the capacity of the FPSO topsides processing system and supporting utilities to accommodate increased production. This document presented a detailed review of all the implications of increased production on the South White Rose Reservoir. In addition, the results from FPSO performance testing were reviewed, including a study of options for de-bottlenecking the process plant on the topsides and capacity testing of selected process streams and support systems. Vibration analysis was conducted before and during performance testing in July 2006 and a small number of areas addressed. The document also addressed flow metering, resource management, certifying authority review, safety plan revisions, environmental effects, as well as benefits to Canada and Newfoundland. 21 tabs., 60 refs

  9. Directed Evolution towards Increased Isoprenoid Production in Saccharomyces cerevisiae

    DEFF Research Database (Denmark)

    Carlsen, Simon; Nielsen, Michael Lynge; Kielland-Brandt, Morten

    production can easily be scaled to meet current demands and it is also an environmental benign production method compared to organic synthesis. Thus it would be attractive to engineer a microorganism to produce high amounts of IPP and other immediate prenyl precursors such as geranyl pyrophosphate, farnesyl...... for discovering new genetic perturbations, which would results in and increased production of isoprenoids by S. cerevisiae has been very limited. This project is focus on creating diversity within a lycopene producing S. cerevisiae strain by construction of gDNA-, cDNA-, and transposon-libraries. The diversified...... coloration which is the result of higher amount of lycopene is being produced and hence high amount of isoprenoid precursor being available. This will elucidate novel genetic targets for increasing isoprenoid production in S. cerevisiae...

  10. Impurity production and transport in the boundary layer of tokamaks

    International Nuclear Information System (INIS)

    McCracken, G.M.

    1987-01-01

    The processes by which impurities are produced and enter the discharge are discussed. Emphasis is placed on sputtering at the limiter and an analytical global model is described which incorporates the self-stabilizing effects whch control the edge temperature. Predictions of the scaling of edge temperature and of total radiated power are compared with experimental data from JET and other tokamaks operating with limiters. Under many conditions the scaling of the edge conditions and of the radiated power is accurately predicted. Impurity transport in the boundary and the question of how to control the boundary layer is then discussed. The example of the Impurity Control Limiter on DITE is described. (author)

  11. THE ROLE OF PRODUCT AUDIT POLICY IN INCREASING ORGANIZATIONAL PERFORMANCE

    Directory of Open Access Journals (Sweden)

    VIOLETA RĂDULESCU

    2012-10-01

    Full Text Available In terms of markets more competitive, competitive advantage becomes a problem getting increasingly more difficult. Offer organization is the first element that can provide differentiation from competitors, the organization should regularly monitor the performance of their products in the market to achieve its objectives. Marketing decisions regarding product policy of the organization should be made after a comprehensive analysis within specific steps of strategic marketing planning. It is necessary, therefore a thorough analysis of the product portfolio of the organizations. In this regard an important role hold product audit policy and brand audit. This paper aims to present the steps and methods to be used for effective analysis of the product portfolio of the organization to effective competition on the relevant market.

  12. Increasing radiographer productivity by an incentive point system.

    Science.gov (United States)

    Williams, B; Chacko, P T

    1983-01-01

    Because of a very low technologist productivity in their Radiology Department, the authors describe a Productive Point System they developed and implemented to solve this personnel problem. After establishing the average time required to perform all exams, point credits (one point for every ten minutes utilized) were assigned to each exam performed, thereby determining an index of production. A Productive Index of 80% was considered realistic and was the equivalent of 192 points for a 40-hour work week. From 1975 to 1978 personal productivity increased from 79% to 113%. This resulted in an average yearly fiscal savings of over $20,000.00 for this three-year period. There was also a significant improvement in exam efficiency and quality, job attitude, personnel morale, and public relations. This program was highly successful because technologist acceptance and cooperation was complete, and this occurred mainly because the system supports the normal occupational goals and expectations of technologists.

  13. Efficiency increase of complex production and transport systems management

    Directory of Open Access Journals (Sweden)

    Kornilov S.

    2017-01-01

    Full Text Available This article deals with the problem of the reduced efficiency of management in complex production - transport systems due to the lack of co-ordination in the operation of industrial enterprises and transport carrying out their maintenance. The existing transport service schedules for auxiliary departments do not take into account possible changes in operating conditions, the probability of malfunctions and the amount of reserves, which leads to an increase in general production costs. To solve this problem, we propose to use the interval regulation of production and transport processes in all departments of the complex production and transport systems. Also, such regulation involves the determination of traffic service priority. This will allow passing on from the regulated control of production and transport processes to the situational one, adapted to specific conditions, and reducing losses from untimely transport servicing, which will lead to a stores reduction and efficiency increase of the enterprise circulating facilities use. Testing the effectiveness of interval regulation was performed on the system and dynamics simulation model of liquid iron transportation in the oxygen converter shop of the metallurgical enterprise. It was established that the use of interval regulation processes in iron production and its transportation will allow decreasing non-productive downtime by 21% and the amount of the liquid iron in anticipation of recasting in the oxygen converter shop – by 33%. Economical effect of reducing the liquid iron downtime during transportation to the oxygen converter shop will be about 30 million rubles per year.

  14. Increasing labor productivity - an important target for miners. [USSR

    Energy Technology Data Exchange (ETDEWEB)

    1984-09-01

    The development of coal mining in the USSR from 1980 to 1983 is discussed. Factors which influence labor productivity increase are analyzed: use of equipment with increased productivity and reliability (e.g. the KM-103 and KD-80 face systems for thin coal seams, the ANShch integrated face systems for steep coal mines, the KMT and 2UKP systems for mining seams with roofs difficult to break down, the 4PP-2 and 4PP-2Shch heading machines), use of equipment replacing manual operations during underground mining, increasing role of surface coal mining which is characterized by labor productivity higher than in underground mining, use of more reliable mining systems in surface mining less influenced by low temperatures in winter (in Siberia), use of mining schemes optimized by means of computerized simulation and mathematical models both in underground and surface coal mining, reducing idletime of mining equipment, social and economic policy aimed at labor productivity increase and reducing absenteeism, improved training and refreshment courses for miners, use of automatic control systems in coal preparation plants, use of more productive equipment for coal preparation.

  15. Using atomic layer deposited tungsten to increase thermal conductivity of a packed bed

    Energy Technology Data Exchange (ETDEWEB)

    Van Norman, Staci A.; Falconer, John L.; Weimer, Alan W., E-mail: alan.weimer@colorado.edu [Department of Chemical and Biological Engineering, University of Colorado, UCB 596, Boulder, Colorado 80309-0596 (United States); Tringe, Joseph W.; Sain, John D. [Lawrence Livermore National Laboratory, 7000 East Ave, Livermore, California 94550 (United States); Yang, Ronggui [Department of Mechanical Engineering, University of Colorado, UCB 427, Boulder, Colorado 80309-0427 (United States)

    2015-04-13

    This study investigated the effective thermal conductivity (k{sub eff}) of packed-beds that contained porous particles with nanoscale tungsten (W) films of different thicknesses formed by atomic layer deposition (ALD). A continuous film on the particles is vital towards increasing k{sub eff} of the packed beds. For example, the k{sub eff} of an alumina packed bed was increased by three times after an ∼8-nm continuous W film with 20 cycles of W ALD, whereas k{sub eff} was decreased on a polymer packed bed with discontinuous, evenly dispersed W-islands due to nanoparticle scattering of phonons. For catalysts, understanding the thermal properties of these packed beds is essential for developing thermally conductive supports as alternatives to structured supports.

  16. Increased cathode performance using a thin film LSM layer on a structured 8YSZ electrolyte surface

    Energy Technology Data Exchange (ETDEWEB)

    Herbstritt, D.; Weber, A.; Ivers-Tiffee, E. [Karlsruhe Univ. (T.H.) (DE). Inst. fuer Werkstoffkunde der Elektrotechnik (IWE); Guntow, U.; Mueller, G. [Fraunhofer-Institut fuer Silicatforschung (ISC), Wuerzburg (Germany)

    2000-07-01

    A considerable part of the power losses in a SOFC single cell occurs due to the polarization resistance of the cathode/electrolyte interface. The resulting high cathodic overvoltage corresponds to an enhanced degradation of the cell. In case of a screen printed LSM cathode layer (LSM: La{sub 1-x}Sr{sub x}MnO{sub 3}) on a YSZ electrolyte substrate (YSZ: Y{sub 2}O{sub 3} stabilised ZrO{sub 2}) the cathodic reaction is generally assumed to be restricted to the three phase boundary (tpb) between cathode, oxidant and the electrolyte surface. The electrochemical active area was increased by a modification of the cathode/electrolyte interface. Single cells with a thin film LSM layer on a structured 8YSZ electrolyte showed a power output of about 0.95 W/cm{sup 2} at 0.7 V cell voltage (950 C; oxidant: air, 0.7 1/min; fuel: hydrogen, 0.5 1/min, 15% fuel utilization). (orig.)

  17. Enhancement of the coercivity in Co-Ni layered double hydroxides by increasing basal spacing.

    Science.gov (United States)

    Zhang, Cuijuan; Tsuboi, Tomoya; Namba, Hiroaki; Einaga, Yasuaki; Yamamoto, Takashi

    2016-09-14

    The magnetic properties of layered double hydroxides (LDH) containing transition metal ions can still develop, compared with layered metal hydroxide salts which exhibit structure-dependent magnetism. In this article, we report the preparation of a hybrid magnet composed of Co-Ni LDH and n-alkylsulfonate anions (Co-Ni-CnSO3 LDH). As Co-Ni LDH is anion-exchangeable, we can systematically control the interlayer spacing by intercalating n-alkylsulfonates with different carbon numbers. The magnetic properties were examined with temperature- and field-dependent magnetization measurements. As a result, we have revealed that the coercive field depends on the basal spacing. It is suggested that increasing the basal spacing varies the competition between the in-plane superexchange interactions and long-range out-of-plane dipolar interactions. Moreover, a jump in the coercive field at around 20 Å of the basal spacing is assumed to be the modification of the magnetic ordering in Co-Ni-CnSO3 LDH.

  18. Managing ulcerative colitis by increasing hydrogen production via ...

    African Journals Online (AJOL)

    The main side-effect of treatment with Acarbose, flatulence, occurs when undigested carbohydrates are fermented by colonic bacteria, resulting in considerable amounts of hydrogen. We found that the enteric benefits of Acarbose are partly due to be their ability to neutralise oxidative stress via increased production of H2 in ...

  19. Strategies for Increasing Tomato Production In Nigeria: A Case ...

    African Journals Online (AJOL)

    The study was carried out in Kabba-Bunu Local Government Area (LGA) of Kogi State, Nigeria in the year 2013 to assess the farmers' perception on the strategies for increasing tomato production in the LGA; an area that has potential to produce tomato on commercial level. The objectives of the study were to identify the ...

  20. Campus Improvement Committee Working to Increase Morale, Productivity | Poster

    Science.gov (United States)

    The Campus Improvement Committee (CIC) has recently been re-established, with Mike Addington, manager, Operations and Maintenance, as chair. Addington is excited to be involved in a committee that’s so near and dear to his heart, and he’s a big believer in the value of increasing morale and productivity through an appealing and pleasant work environment.

  1. Positive feedback between increasing atmospheric CO2 and ecosystem productivity

    Science.gov (United States)

    Gelfand, I.; Hamilton, S. K.; Robertson, G. P.

    2009-12-01

    Increasing atmospheric CO2 will likely affect both the hydrologic cycle and ecosystem productivity. Current assumptions that increasing CO2 will lead to increased ecosystem productivity and plant water use efficiency (WUE) are driving optimistic predictions of higher crop yields as well as greater availability of freshwater resources due to a decrease in evapotranspiration. The plant physiological response that drives these effects is believed to be an increase in carbon uptake either by (a) stronger CO2 gradient between the stomata and the atmosphere, or by (b) reduced CO2 limitation of enzymatic carboxylation within the leaf. The (a) scenario will lead to increased water use efficiency (WUE) in plants. However, evidence for increased WUE is mostly based on modeling studies, and experiments producing a short duration or step-wise increase in CO2 concentration (e.g. free-air CO2 enrichment). We hypothesize that the increase in atmospheric CO2 concentration is having a positive effect on ecosystem productivity and WUE. To investigate this hypothesis, we analyzed meteorological, ANPP, and soil CO2 flux datasets together with carbon isotopic ratio (13C/12C) of archived plant samples from the long term ecological research (LTER) program at Kellogg Biological Station. The datasets were collected between 1989 and 2007 (corresponding to an increase in atmospheric CO2 concentration of ~33 ppmv at Mauna Loa). Wheat (Triticum aestivum) samples taken from 1989 and 2007 show a significant decrease in the C isotope discrimination factor (Δ) over time. Stomatal conductance is directly related to Δ, and thus Δ is inversely related to plant intrinsic WUE (iWUE). Historical changes in the 13C/12C ratio (δ13C) in samples of a perennial forb, Canada goldenrod (Solidago canadensis), taken from adjacent successional fields, indicate changes in Δ upon uptake of CO2 as well. These temporal trends in Δ suggest a positive feedback between the increasing CO2 concentration in the

  2. Influence of the air Layer Between the Conductor and the Layer Ofinsulating Material in Cable Products

    Directory of Open Access Journals (Sweden)

    Ivanova Evgenia V.

    2016-01-01

    Full Text Available There are developed mathematical model of physical and chemical processes of polymerization adhesive coating stranded cable. There are shown difference in the temperature distribution along the radius of the finished product in the presence of an air gap between the conductor and the rubber sheath. Also, due to the need to change process parameters with possible loose contacts inside the cable. Such as the temperature of the heating surface, feeding speed and dwell time in the oven.

  3. High-energy X-ray production in a boundary layer of an accreting neutron star

    International Nuclear Information System (INIS)

    Hanawa, Tomoyuki

    1991-01-01

    It is shown by Monte Carlo simulation that high-energy X-rays are produced through Compton scattering in a boundary layer of an accreting neutron star. The following is the mechanism for the high-energy X-ray production. An accreting neutron star has a boundary layer rotating rapidly on the surface. X-rays radiated from the star's surface are scattered in part in the boundary layer. Since the boundary layer rotates at a semirelativistic speed, the scattered X-ray energy is changed by the Compton effect. Some X-rays are scattered repeatedly between the neutron star and the boundary layer and become high-energy X-rays. This mechanism is a photon analog of the second-order Fermi acceleration of cosmic rays. When the boundary layer is semitransparent, high-energy X-rays are produced efficiently. 17 refs

  4. CONVERSION PRODUCT STRUCTURE AS TOOL TO INCREASE YIELD PROCESSING ORGANIZATIONS

    Directory of Open Access Journals (Sweden)

    A. I. Khorev

    2014-01-01

    Full Text Available The authors' analysis of the performance of organizations, processing raw materials of agricultural origin, in particular, dealing with meat processing, identified the need to develop tools to increase their profitability. Unlike common approaches to assessing the profitability of the processing organizations, taking into account only the interests of the organization's leadership and buyers of products, the authors proposed and implemented a concept based on the interests of participants in the triune balance business activities: owners of capital, management organizations and consumers. As one of the tools for improving the yield of processing organizations are invited to transform their product mix of economic evaluations of profitability of each product line positions. Russian researchers income from product sales are traditionally measured by indicators such as net income, income from sales, profit margins and profitability level - in terms of return on sales. The disadvantage of using these indicators, according to the authors, is their lack of objectivity in the evaluation of the effectiveness of investment business owners. In this work was used unconventional and non-proliferation in the Russian practice, the rate of economic value added (EVA, a built - in system of profitability assortment positions. As indicators, the production of a particular product line units proposed and used two quantitative indicators - EVA level per unit of production and profitability of production (for EVA, as well as a quality parameter - the level of demand. Developed by the evaluation program transformation product structure represented as a matrix management capabilities, allowing to achieve a balance of interests of the triune main participants in business activity.

  5. Enhanced monoclonal antibody production by gradual increase of osmotic pressure

    OpenAIRE

    Lin, Jianqiang; Takagi, Mutsumi; Qu, Yinbo; Gao, Peiji; Yoshida, Toshiomi

    1999-01-01

    The time length required for the adaptation of AFP-27 hybridoma cells to high osmotic pressure and the effect of a gradual increase of osmotic pressure on monoclonal antibody production were investigated. When the cells were subjected to an increase of osmotic pressure from 300 mOsmol kg-1 to 366 mOsmol kg- 1, the intracellular content of osmoprotective free amino acids reached a maximum level 6 h after the osmotic pressure was increased to 366 mOsmol kg-1. The same time period of 6 h incubat...

  6. Mutations That Alter the Bacterial Cell Envelope Increase Lipid Production

    Energy Technology Data Exchange (ETDEWEB)

    Lemmer, Kimberly C.; Zhang, Weiping; Langer, Samantha J.; Dohnalkova, Alice; Hu, Dehong; Lemke, Rachelle A.; Piotrowski, Jeff S.; Orr, Galya; Noguera, Daniel R.; Donohue, Timothy J.

    2017-05-23

    ABSTRACT

    Lipids from microbes offer a promising source of renewable alternatives to petroleum-derived compounds. In particular, oleaginous microbes are of interest because they accumulate a large fraction of their biomass as lipids. In this study, we analyzed genetic changes that alter lipid accumulation inRhodobacter sphaeroides. By screening anR. sphaeroidesTn5mutant library for insertions that increased fatty acid content, we identified 10 high-lipid (HL) mutants for further characterization. These HL mutants exhibited increased sensitivity to drugs that target the bacterial cell envelope and changes in shape, and some had the ability to secrete lipids, with two HL mutants accumulating ~60% of their total lipids extracellularly. When one of the highest-lipid-secreting strains was grown in a fed-batch bioreactor, its lipid content was comparable to that of oleaginous microbes, with the majority of the lipids secreted into the medium. Based on the properties of these HL mutants, we conclude that alterations of the cell envelope are a previously unreported approach to increase microbial lipid production. We also propose that this approach may be combined with knowledge about biosynthetic pathways, in this or other microbes, to increase production of lipids and other chemicals.

    IMPORTANCEThis paper reports on experiments to understand how to increase microbial lipid production. Microbial lipids are often cited as one renewable replacement for petroleum-based fuels and chemicals, but strategies to increase the yield of these compounds are needed to achieve this goal. While lipid biosynthesis is often well understood, increasing yields of these compounds to industrially relevant levels is a challenge, especially since genetic, synthetic biology, or engineering approaches are not feasible in many microbes. We show that altering the bacterial cell envelope can be used to increase

  7. Increasing loyalty to breastfeeding: investigating a product development strategy.

    Science.gov (United States)

    Parkinson, Joy; Russell-Bennett, Rebekah; Previte, Josephine

    2012-01-01

    This article demonstrates how social marketing insights were used to influence women's loyalty to breastfeeding. The article reports on a social marketing campaign undertaken by the Australian Breastfeeding Association and a government health department, which used a product development strategy in order to increase breastfeeding loyalty. Seeking new approaches to support breastfeeding behaviors is critical and timely, because while initiation rates of breastfeeding are high in developed countries such as the United Kingdom, Australia, Canada, and the United States, duration rates are significantly lower. Results indicate that a product- focused strategy influences pregnant women's loyalty to exclusively breastfeeding.

  8. Thin layer drying kinetics of by-products from olive oil processing.

    Science.gov (United States)

    Montero, Irene; Miranda, Teresa; Arranz, Jose Ignacio; Rojas, Carmen Victoria

    2011-01-01

    The thin-layer behavior of by-products from olive oil production was determined in a solar dryer in passive and active operation modes for a temperature range of 20-50 °C. The increase in the air temperature reduced the drying time of olive pomace, sludge and olive mill wastewater. Moisture ratio was analyzed to obtain effective diffusivity values, varying in the oil mill by-products from 9.136 × 10(-11) to 1.406 × 10(-9) m(2)/s in forced convection (m(a) = 0.22 kg/s), and from 9.296 × 10(-11) to 6.277 × 10(-10) m(2)/s in natural convection (m(a) = 0.042 kg/s). Diffusivity values at each temperature were obtained using the Fick's diffusion model and, regardless of the convection, they increased with the air temperature. The temperature dependence on the effective diffusivity was determined by an Arrhenius type relationship. The activation energies were found to be 38.64 kJ/mol, 30.44 kJ/mol and 47.64 kJ/mol for the olive pomace, the sludge and the olive mill wastewater in active mode, respectively, and 91.35 kJ/mol, 14.04 kJ/mol and 77.15 kJ/mol in natural mode, in that order.

  9. Experimentally increased nutrient availability at the permafrost thaw front selectively enhances biomass production of deep-rooting subarctic peatland species

    NARCIS (Netherlands)

    Keuper, Frida; Dorrepaal, Ellen; van Bodegom, Peter M.; van Logtestijn, Richard; Venhuizen, Gemma; van Hal, Jurgen; Aerts, Rien

    2017-01-01

    Climate warming increases nitrogen (N) mineralization in superficial soil layers (the dominant rooting zone) of subarctic peatlands. Thawing and subsequent mineralization of permafrost increases plant-available N around the thaw-front. Because plant production in these peatlands is N-limited, such

  10. Increasing rice production in Malaysia: Department of Agriculture approach

    International Nuclear Information System (INIS)

    Asna Booty Othman; Chua Lee Kiang; Rathinam Thiagarajan; Aziziah Md Jan

    2002-01-01

    Increasing rice productivity will continue to be an important agenda in the agricultural development program of the country. This represents a challenge to the Department of Agriculture. To address this challenge, it calls for creativity, innovation, ideas and initiatives in the use of technologies that consist of land leveling, in the field water management, Integrated Pest Management (IPM), production and distribution of quality seeds, effective fertilizer usage and value added activities. Rice areas which have been leveled using laser guided technology have shown yield increase from 3.3 t/ha to 5.1 t/ha. In-field water management increases rice yield, reduces water wastage and ensures timeliness of operations and improve soil water bearing capacity. IPM has proven highly beneficial in the control of field rats, reducing the incidence of diseases such as rice blast, lowering the occurrence of insect pest outbreaks and weed infestation. Fish rearing and fattening of ducklings to adulthood in the rice fields have also been undertaken as profitable enterprises in the rice farming system. In its effort to modernise and increase rice productivity, the Department of Agriculture approach in acquisition of technology from research agencies, and its adaptation and adoption are discussed. Any technology promoted must be economically viable, socially acceptable and technologically feasible for effective implementation. (Author)

  11. Increased and mistimed sex hormone production in night shift workers.

    Science.gov (United States)

    Papantoniou, Kyriaki; Pozo, Oscar J; Espinosa, Ana; Marcos, Josep; Castaño-Vinyals, Gemma; Basagaña, Xavier; Juanola Pagès, Elena; Mirabent, Joan; Martín, Jordi; Such Faro, Patricia; Gascó Aparici, Amparo; Middleton, Benita; Skene, Debra J; Kogevinas, Manolis

    2015-05-01

    Night shift work has been associated with an increased risk for breast and prostate cancer. The effect of circadian disruption on sex steroid production is a possible underlying mechanism, underinvestigated in humans. We have assessed daily rhythms of sex hormones and melatonin in night and day shift workers of both sexes. We recruited 75 night and 42 day workers, ages 22 to 64 years, in different working settings. Participants collected urine samples from all voids over 24 hours on a working day. Urinary concentrations of 16 sex steroid hormones and metabolites (estrogens, progestagens, and androgens) and 6-sulfatoxymelatonin were measured in all samples. Mean levels and peak time of total and individual metabolite production were compared between night and day workers. Night workers had higher levels of total progestagens [geometric mean ratio (GMR) 1.65; 95% confidence intervals (CI), 1.17-2.32] and androgens (GMR: 1.44; 95% CI, 1.03-2.00), compared with day workers, after adjusting for potential confounders. The increased sex hormone levels among night shift workers were not related to the observed suppression of 6-sulfatoxymelatonin. Peak time of androgens was significantly later among night workers, compared with day workers (testosterone: 12:14 hours; 10:06-14:48 vs. 08:35 hours; 06:52-10:46). We found increased levels of progestagens and androgens as well as delayed peak androgen production in night shift workers compared with day workers. The increase and mistiming of sex hormone production may explain part of the increased risk for hormone-related cancers observed in night shift workers. ©2015 American Association for Cancer Research.

  12. Low-dielectric layer increases nanosecond electric discharges in distilled water

    KAUST Repository

    Hamdan, Ahmad

    2016-10-24

    Electric discharge in liquids is an emerging field of research, and is involved into various environmental applications (water purification, fuel reforming, nanomaterial synthesis, etc.). Increasing the treatment efficiency with simultaneous decreasing of the energy consumption are the main goals of today’s research. Here we present an experimental study of nanosecond discharge in distilled water covered by a layer of dielectric material. We demonstrate through this paper that the discharge efficiency can be improved by changing the interface position regarding the anode tip. The efficiency increase is due to the increase of the discharge probability as well as the plasma volume. The understanding of the experimental results is brought and strengthened by simulating the electric field distribution, using Comsol Multiphysics software. Because the dielectric permittivity (ε) is discontinuous at the interface, the electric field is enhanced by a factor that depends on the relative value of ε of the two liquids. The present result is very promising in future: opportunities for potential applications as well as fundamental studies for discharges in liquid.

  13. Do Foreign Experts Increase the Productivity of Domestic Firms?

    DEFF Research Database (Denmark)

    Malchow-Møller, Nikolaj; Munch, Jakob Roland; Rose Skaksen, Jan

    While most countries welcome (and some even subsidise) high-skilled immigrants, there is very limited evidence of their importance for domestic firms. To guide our empirical analysis, we first set up a simple theoretical model to show how foreign experts may impact on the productivity and wages o...... productive (pay higher wages) and increase their exports of goods and services.......While most countries welcome (and some even subsidise) high-skilled immigrants, there is very limited evidence of their importance for domestic firms. To guide our empirical analysis, we first set up a simple theoretical model to show how foreign experts may impact on the productivity and wages...... of domestic firms. Using matched worker-firm data from Denmark and a difference-indifferences matching approach, we then find that firms that hire foreign experts – defined as employees eligible for reduced taxation under the Danish "Tax scheme for foreign researchers and key employees" – both become more...

  14. Green certificates will lead to increased electric power production

    International Nuclear Information System (INIS)

    Lind, Oddvar

    2004-01-01

    The implementation of green certificates will lead to increased electricity production from renewable energy sources and less risk of price crises. For the time being, a common market for green certificates will be established with Sweden from January 1, 2006. It is possible to realise a ''compulsory total quota'' of 20 TWh by 2016. Green certificates will imply a premium on the electricity bill. However, the quota system will imply increased power generation, which in turn tends to lower the price. Norway should in principle follow Sweden's definition of renewable energy: all new hydroelectric power, wind power, solar energy, wave and tidal power, biomass energy, and energy recovery. The certificate regime will apply to new investments in renewable power production. However, it would be natural to include the established renewable power production that is currently receiving support. Some critics fear that the consumers rather than the authorities will subsidize the production of green power. The point is being made that central EU countries may save great sums by investing in renewable energy in Norway

  15. Strategy to increase Barangan Banana production in Kabupaten Deli Serdang

    Science.gov (United States)

    Adhany, I.; Chalil, D.; Ginting, R.

    2018-02-01

    This study was conducted to analyze internal and external factors in increasing Barangan Banana production in Kabupaten Deli Serdang. Samples were determined by snowball sampling technique and purposive sampling method. Using SWOT analysis method, this study found that there were 6 internal strategic factors and 9 external strategic factors. Among that strategic factors, support for production facilities appears as the most important internal strategic factor, while the demand for Barangan Banana. as the most important external strategic factor. Based on the importance and existing condition of these strategic factors, using support for production facilities and realization of supporting facilities with farming experience are the strategies covering strength-opportunity (SO), organizing mentoring to meet the demand for Barangan Banana are the strategies covering weakness-opportunity (WO), making use of funding support and subsidies to widen the land, using tissue culture seeds and facilities and infrastructures are the strategies covering strength-threat (ST), increas the funding support to widen the land, the use of tissue culture seeds and facilities and infrastructures are the strategies covering weakness-threat (WT) are discussed and proposed to increase Barangan Banana productivity in Kabupaten Deli Serdang.

  16. Increasing Dominance - the Role of Advertising, Pricing and Product Design

    OpenAIRE

    Kretschmer, Tobias; Rösner, Mariana

    2010-01-01

    Despite the empirical relevance of advertising strategies in concentrated markets, the economics literature is largely silent on the effect of persuasive advertising strategies on pricing, market structure and increasing (or decreasing) dominance. In a simple model of persuasive advertising and pricing with differentiated goods, we analyze the interdependencies between ex-ante asymmetries in consumer appeal, advertising and prices. Products with larger initial appeal to consumers will ...

  17. Increasing Military Physician Productivity in a Managed Care Environment

    Science.gov (United States)

    1992-07-13

    allows us to obtain to a common denominator, or one single rating even though the services are dissimilar and the input units are not "weighted." Serway ...many ideas as possible to catalyze the process. In removing barriers to productivity in the work environment, a thorough analysis of the physical ...physician and the organization has increased. The whole text of the book "Doctor’s Decisions and the Cost of Medical Care" is dedicated to this concept

  18. Increased and Mistimed Sex Hormone Production in Night Shift Workers

    OpenAIRE

    Papantoniou, K; Pozo, OJ; Espinosa, A; Marcos, J; Castano-Vinyals, G; Basagana, X; Juanola Pages, E; Mirabent, J; Martin, J; Such Faro, P; Gasco Aparici, A; Middleton, B; Skene, DJ; Kogevinas, M

    2015-01-01

    BACKGROUND: Night shift work has been associated with an increased risk for breast and prostate cancer. The effect of circadian disruption on sex steroid production is a possible underlying mechanism, underinvestigated in humans. We have assessed daily rhythms of sex hormones and melatonin in night and day shift workers of both sexes. METHODS: We recruited 75 night and 42 day workers, ages 22 to 64 years, in different working settings. Participants collected urine samples from all voids over ...

  19. Programming adaptive control to evolve increased metabolite production.

    Science.gov (United States)

    Chou, Howard H; Keasling, Jay D

    2013-01-01

    The complexity inherent in biological systems challenges efforts to rationally engineer novel phenotypes, especially those not amenable to high-throughput screens and selections. In nature, increased mutation rates generate diversity in a population that can lead to the evolution of new phenotypes. Here we construct an adaptive control system that increases the mutation rate in order to generate diversity in the population, and decreases the mutation rate as the concentration of a target metabolite increases. This system is called feedback-regulated evolution of phenotype (FREP), and is implemented with a sensor to gauge the concentration of a metabolite and an actuator to alter the mutation rate. To evolve certain novel traits that have no known natural sensors, we develop a framework to assemble synthetic transcription factors using metabolic enzymes and construct four different sensors that recognize isopentenyl diphosphate in bacteria and yeast. We verify FREP by evolving increased tyrosine and isoprenoid production.

  20. Towards single step production of multi-layer inorganic hollow fibers

    NARCIS (Netherlands)

    de Jong, J.; Benes, Nieck Edwin; Koops, G.H.; Wessling, Matthias

    2004-01-01

    In this work we propose a generic synthesis route for the single step production of multi-layer inorganic hollow fibers, based on polymer wet spinning combined with a heat treatment. With this new method, membranes with a high surface area per unit volume ratio can be produced, while production time

  1. Demonstrating multi-layered MAS in control of offshore oil and gas production

    DEFF Research Database (Denmark)

    Lindegaard Mikkelsen, Lars; Næumann, J. R.; Demazeau, Y.

    2013-01-01

    From a control perspective, offshore oil and gas production is very challenging due to the many and potentially conflicting production objectives that arise from the intrinsic complexity of the oil and gas domain. In this paper, we demonstrate how a multi-layered multi-agent system can be used in...

  2. Multi-layered satisficing decision making in oil and gas production platforms

    DEFF Research Database (Denmark)

    Lindegaard Mikkelsen, Lars; Demazeau, Yves; Jørgensen, B. N.

    2013-01-01

    From a control perspective, offshore oil and gas production is very challenging due to the many and potentially conflicting production objectives that arise from the intrinsic complexity of the oil and gas domain. In this paper, we show how a multi-layered multi-agent system can be used to implem...

  3. A modular modulation method for achieving increases in metabolite production.

    Science.gov (United States)

    Acerenza, Luis; Monzon, Pablo; Ortega, Fernando

    2015-01-01

    Increasing the production of overproducing strains represents a great challenge. Here, we develop a modular modulation method to determine the key steps for genetic manipulation to increase metabolite production. The method consists of three steps: (i) modularization of the metabolic network into two modules connected by linking metabolites, (ii) change in the activity of the modules using auxiliary rates producing or consuming the linking metabolites in appropriate proportions and (iii) determination of the key modules and steps to increase production. The mathematical formulation of the method in matrix form shows that it may be applied to metabolic networks of any structure and size, with reactions showing any kind of rate laws. The results are valid for any type of conservation relationships in the metabolite concentrations or interactions between modules. The activity of the module may, in principle, be changed by any large factor. The method may be applied recursively or combined with other methods devised to perform fine searches in smaller regions. In practice, it is implemented by integrating to the producer strain heterologous reactions or synthetic pathways producing or consuming the linking metabolites. The new procedure may contribute to develop metabolic engineering into a more systematic practice. © 2015 American Institute of Chemical Engineers.

  4. Examining the impacts of increased corn production on ...

    Science.gov (United States)

    This study demonstrates the value of a coupled chemical transport modeling system for investigating groundwater nitrate contamination responses associated with nitrogen (N) fertilizer application and increased corn production. The coupled Community Multiscale Air Quality Bidirectional and Environmental Policy Integrated Climate modeling system incorporates agricultural management practices and N exchange processes between the soil and atmosphere to estimate levels of N that may volatilize into the atmosphere, re-deposit, and seep or flow into surface and groundwater. Simulated values from this modeling system were used in a land-use regression model to examine associations between groundwater nitrate-N measurements and a suite of factors related to N fertilizer and groundwater nitrate contamination. Multi-variable modeling analysis revealed that the N-fertilizer rate (versus total) applied to irrigated (versus rainfed) grain corn (versus other crops) was the strongest N-related predictor variable of groundwater nitrate-N concentrations. Application of this multi-variable model considered groundwater nitrate-N concentration responses under two corn production scenarios. Findings suggest that increased corn production between 2002 and 2022 could result in 56% to 79% increase in areas vulnerable to groundwater nitrate-N concentrations ≥ 5 mg/L. These above-threshold areas occur on soils with a hydraulic conductivity 13% higher than the rest of the domain. Additio

  5. Increasing ozone in marine boundary layer inflow at the west coasts of North America and Europe

    Directory of Open Access Journals (Sweden)

    D. D. Parrish

    2009-02-01

    Full Text Available An effective method is presented for determining the ozone (O3 mixing ratio in the onshore flow of marine air at the North American west coast. By combining the data available from all marine boundary layer (MBL sites with simultaneous wind data, decadal temporal trends of MBL O3 in all seasons are established with high precision. The average springtime temporal trend over the past two decades is 0.46 ppbv/yr with a 95% confidence limit of 0.13 ppbv/yr, and statistically significant trends are found for all seasons except autumn, which does have a significantly smaller trend than other seasons. The average trend in mean annual ozone is 0.34±0.09 ppbv/yr. These decadal trends at the North American west coast present a striking comparison and contrast with the trends reported for the European west coast at Mace Head, Ireland. The trends in the winter, spring and summer seasons compare well at the two locations, while the Mace Head trend is significantly greater in autumn. Even though the trends are similar, the absolute O3 mixing ratios differ markedly, with the marine air arriving at Europe in all seasons containing 7±2 ppbv higher ozone than marine air arriving at North America. Further, the ozone mixing ratios at the North American west coast show no indication of stabilizing as has been reported for Mace Head. In a larger historical context the background boundary layer O3 mixing ratios over the 130 years covered by available data have increased substantially (by a factor of two to three, and this increase continues at present, at least in the MBL of the Pacific coast region of North America. The reproduction of the increasing trends in MBL O3 over the past two decades, as well as the difference in the O3 mixing ratios between the two coastal regions will present a significant challenge for global chemical transport models. Further, the ability of the models to at least semi

  6. A heuristic algorithm for a multi-product four-layer capacitated location-routing problem

    Directory of Open Access Journals (Sweden)

    Mohsen Hamidi

    2014-01-01

    Full Text Available The purpose of this study is to solve a complex multi-product four-layer capacitated location-routing problem (LRP in which two specific constraints are taken into account: 1 plants have limited production capacity, and 2 central depots have limited capacity for storing and transshipping products. The LRP represents a multi-product four-layer distribution network that consists of plants, central depots, regional depots, and customers. A heuristic algorithm is developed to solve the four-layer LRP. The heuristic uses GRASP (Greedy Randomized Adaptive Search Procedure and two probabilistic tabu search strategies of intensification and diversification to tackle the problem. Results show that the heuristic solves the problem effectively.

  7. Reversing the direction of galvanotaxis with controlled increases in boundary layer viscosity

    Science.gov (United States)

    Kobylkevich, Brian M.; Sarkar, Anyesha; Carlberg, Brady R.; Huang, Ling; Ranjit, Suman; Graham, David M.; Messerli, Mark A.

    2018-05-01

    Weak external electric fields (EFs) polarize cellular structure and direct most migrating cells (galvanotaxis) toward the cathode, making it a useful tool during tissue engineering and for healing epidermal wounds. However, the biophysical mechanisms for sensing weak EFs remain elusive. We have reinvestigated the mechanism of cathode-directed water flow (electro-osmosis) in the boundary layer of cells, by reducing it with neutral, viscous polymers. We report that increasing viscosity with low molecular weight polymers decreases cathodal migration and promotes anodal migration in a concentration dependent manner. In contrast, increased viscosity with high molecular weight polymers does not affect directionality. We explain the contradictory results in terms of porosity and hydraulic permeability between the polymers rather than in terms of bulk viscosity. These results provide the first evidence for controlled reversal of galvanotaxis using viscous agents and position the field closer to identifying the putative electric field receptor, a fundamental, outside-in signaling receptor that controls cellular polarity for different cell types.

  8. Predictors of death and production performance of layer chickens in opened and sealed pens in a tropical savannah environment.

    Science.gov (United States)

    Shittu, Aminu; Raji, Abdullahi Abdullahi; Madugu, Shuaibu A; Hassan, Akinola Waheed; Fasina, Folorunso Oludayo

    2014-09-12

    Layer chickens are exposed to high risks of production losses and mortality with impact on farm profitability. The harsh tropical climate and severe disease outbreaks, poor biosecurity, sub-minimal vaccination and treatment protocols, poor management practices, poor chick quality, feed-associated causes, and unintended accidents oftentimes aggravate mortality and negatively affect egg production. The objectives of this study were to estimate the probability of survival and evaluate risk factors for death under different intensive housing conditions in a tropical climate, and to assess the production performance in the housing systems. Daily mean mortality percentages and egg production figures were significantly lower and higher in the sealed pens and open houses (P ratio for mortality of layers raised in sealed pens was 0.568 (56.8%). Reasons for spiked mortality in layer chickens may not always be associated with disease. Hot-dry climatic environment is associated with heat stress, waning immunity and inefficient feed usage and increase probability of death with reduced egg production; usage of environmentally controlled building in conditions where environmental temperature may rise significantly above 25°C will reduce this impact. Since younger birds (19-38 weeks) are at higher risk of death due to stress of coming into production, management changes and diseases, critical implementation of protocols that will reduce death at this precarious period becomes mandatory. Whether older chickens' better protection from death is associated with many prophylactic and metaphylactic regimen of medications/vaccination will need further investigation.

  9. Determination of radiolysis products in gamma-irradiated multilayer barrier food packaging films containing a middle layer of recycled LDPE

    International Nuclear Information System (INIS)

    Chytiri, Stavroula; Goulas, Antonios E.; Badeka, Anastasia; Riganakos, Kyriakos A.; Petridis, Dimitrios; Kontominas, Michael G.

    2008-01-01

    Volatile and non-volatile radiolysis products and sensory changes of five-layer food packaging films have been determined after gamma irradiation (5-60 kGy). Barrier films were based on polyamide (PA) and low-density polyethylene (LDPE). Each film contained a middle buried layer of recycled LDPE or 100% virgin LDPE (control samples). Data showed that a large number of radiolysis products were produced such as hydrocarbons, alcohols, carbonyl compounds, carboxylic acid. These compounds were detected in the food simulant after contact with all films even at the lower absorbed doses of 5 and 10 kGy. The type and concentration of radiolysis products increased progressively with radiation dose, while no new compounds were detected as a result of the presence of recycled LDPE. In addition, irradiation dose appears to influence the sensory properties of table water in contact with films

  10. PRODUCTIVITY OF LAYERS AND EGG QUALITY IN FREE RANGE AND CAGE SYSTEM OF HOUSING

    OpenAIRE

    Đ. Senčić; Danijela Butko

    2006-01-01

    The research was conducted with two groups of Lohmann Brown hybrid layers. Production of eggs lasted for 52 weeks. A control group of layers was kept in the conventional housing system, that is, in cages, while experimental group was kept in the free range system. Layers from the free range system, compared to those kept in cages, laid fewer eggs, (266:295), they consumed more feed on daily basis (129 g : 115 g), more feed per kilogram of egg weight (2.83 kg : 2.35 kg), they had higher mor...

  11. A REDESIGN LAYOUT TO INCREASE PRODUCTIVITY OF A COMPANY

    Directory of Open Access Journals (Sweden)

    Vincentia Kitriastika

    2013-06-01

    Full Text Available This project is conducted in Company X, a passenger cars wheel producing company located in Sunter, North Jakarta. With a view of increasing the productivity of the company, the focus of this project will be redesigned the layout of the factory. The main problem encountered is that the goods are not produced in single location, causing a considerable hindrance in terms of time and distance, and hence efficiency. The redesigning layout process will use SLP method and flow analysis while supported by analysis of assembly line balancing to optimize the layout. Regarding the evaluation process, ARENA software will be used to simulate and identify the bottleneck in the production process, and comparing the layout alternatives to decide the best layout. The best chosen layout according to the simulation and SLP method that supported with flow analysis and assembly line balancing will be used as the master draft layout that will be proposed to Company X.

  12. Improvements of soil quality for increased food production in Norway

    Science.gov (United States)

    Øygarden, Lillian; Klakegg, Ove; Børresen, Trond; Krogstad, Tore; Kjersti Uhlen, Anne

    2016-04-01

    Since the 1990ties, agricultural land in use in Norway has diminished and yields per hectare for cereals and forages have stagnated. An expert panel appointed to advice on how to increase Norwegian grain production emphasizes low profitability and poor soil quality as limiting factors. A White Paper from the Norwegian Government, Report No.9 (2011-2012), stated that the main goal for the agricultural sector is to increase food production proportional to the expected increase in population (20 % by 2030) in order to maintain self-sufficiency at the present level. This is the background for the interdisciplinary project AGROPRO "Agronomy for increased food production - Challenges and solutions" (2013 - 2017)" financed by the Norwegian research council. A mail goal is seeking possibilities for improvements in agronomic practices for increased and sustainable food production and to identify drivers and challenges for their implementation. Are the key to higher yields hidden in the soil? The paper present an overview of the research activities in the project and some results of the improvements of soil quality to minimize yield gap in cereal and forage production. Detailed new soil maps provide soil information on field scale of soil quality and the suitability for growing different crops like cereal production or vegetables. The detailed soil information is also beeing used for development and adaptation of the planning tool «Terranimo» to reduce risk of soil compaction.The farmer get available soil information for each field, provide information about the maschinery in use- tractors and equipment, tyres, pressure. The decision tool evaluate when the soil is suitable for tillage, calculate the risk of compaction for dry, moist and wet soil. New research data for compaction on Norwegian clay and silt soil are included. Climate change with wetter conditions gives challenges for growing cereals. The project is testing genetic variation in cereals for tolerance to water

  13. Increased outdoor recreation, diminished ozone layer pose ultraviolet radiation threat to eye

    Energy Technology Data Exchange (ETDEWEB)

    1989-02-24

    The long-term effects of ultraviolet (UV) light on the eye are of increasing concern as many people live longer and spend more of that time in outdoor recreation and as the diminishing ozone layer filters less UV light. Ultraviolet radiation is strongest at high altitude, low latitude, and open for reflective environments (sand, snow, or water). For people who lack an eye lens (aphakics), UV light is transmitted directly onto the retina. Cumulative exposure to the 300- to 400-nm range of UV light is one factor causing cataracts. Ophthalmologists say cataracts cause visual deficits for more than 3.5 million people in the United States. Cumulative UV exposure may lead to age-related macular degeneration. At a Research to Prevent Blindness conference in Arlington, VA, John S. Werner, PhD, professor of psychology and neurosciences at the University of Colorado, Boulder, described how his group demonstrated the effects of UV light on retinal cones. Different types of intraocular lenses were placed in each eye of eight patients who had undergone bilateral cataract surgery. After five years, retinal cones chronically exposured to UV radiation had less sensitivity for short wavelengths (440 nm) by a factor of 1.7.

  14. Increasing carbon and material productivity through environmental tax reform

    International Nuclear Information System (INIS)

    Ekins, Paul; Pollitt, Hector; Summerton, Philip; Chewpreecha, Unnada

    2012-01-01

    Environmental tax reform (ETR), a shift in taxation towards environmental taxes, has been implemented on a small scale in a number of European countries. This paper first gives a short review of the literature about ETR. An Appendix briefly describes the model used for a modelling exercise to explore, through scenarios with low and high international energy prices, the implications of a large-scale ETR in the European Union, sufficient to reach the EU's emission reduction targets for 2020. The paper then reports the results of the exercise. The ETR results in increased carbon and materials, but reduced labour, productivity, with the emission reductions distributed across all sectors as a reduction in the demand for all fossil fuels. There are also small GDP increases for most, but not all, EU countries for all the scenarios, and for the EU as a whole. Both the environmental and macroeconomic outcomes are better with low than with high energy prices, because the former both increases the scale of the ETR required to reach the targets, and reduces the outflow of foreign exchange to pay for energy imports. ETR emerges from the exercise as an attractive and cost-effective policy for environmental improvement. - Highlights: ► European experience with environmental tax reform (ETR) is reviewed. ► Scenarios which meet EU carbon emission targets are modelled. ► The ETR results in increased carbon and materials, but reduced labour, productivity. ► There are small GDP increases for most, but not all, EU countries. ► ETR emerges as an attractive and cost-effective environmental policy.

  15. Increased carrier lifetimes in epitaxial silicon layers on buried silicon nitride produced by ion implantation

    International Nuclear Information System (INIS)

    Skorupa, W.; Kreissig, U.; Hensel, E.; Bartsch, H.

    1984-01-01

    Carrier lifetimes were measured in epitaxial silicon layers deposited on buried silicon nitride produced by high-dose nitrogen implantation at 330 keV. The values were in the range 20-200 μs. The results are remarkable taking into account the high density of crystal defects in the epitaxial layers. Comparing with other SOI technologies the measured lifetimes are higher by 1-2 orders of magnitude. (author)

  16. Reverse micelles as suitable microreactor for increased biohydrogen production

    Energy Technology Data Exchange (ETDEWEB)

    Pandey, Anjana [Nanotechnology and Molecular Biology Laboratory, Centre of Biotechnology, University of Allahabad, Allahabad 211002 (India); Pandey, Ashutosh [Centre of Energy Studies, MNNIT, Allahabad 211004 (India)

    2008-01-15

    Reverse micelles have been shown to act as efficient microreactors for enzymic reactions and whole cell entrapment in organic (non-aqueous) media wherein the reactants are protected from denaturation by the surrounding organic solvent. These micelles are thermodynamically stable, micrometer sized water droplets dispersed in an organic phase by a surfactant. It has been observed that when whole cells of photosynthetic bacteria (Rhodopseudomonas sphaeroides or Rhodobacter sphaeroides 2.4.1) are entrapped inside these reverse micelles, the H{sub 2} production enhanced from 25 to 35 folds. That is, 1.71mmol(mgprotein){sup -1}h{sup -1} in case of R. sphaeroides which is 25 fold higher in benzene-sodium lauryl sulfate reverse micelles. Whereas, in case of R. sphaeroides 2.4.1 the H{sub 2} production was increased by 35 fold within AOT-isooctane reverse micelles i.e. 11.5mmol(mgprotein){sup -1}h{sup -1}. The observations indicate that the entrapment of whole cells of microbes within reverse micelles provides a novel and efficient technique to produce hydrogen by the inexhaustible biological route. The two microorganisms R. sphaeroides 2.4.1 (a photosynthetic bacteria) and Citrobacter Y19 (a facultative anaerobic bacteria) together are also entrapped within AOT-isooctane and H{sub 2} production was measured i.e. 69mmol(mgprotein){sup -1}h{sup -1}. The nitrogenase enzyme responsible for hydrogen production by R. sphaeroides/R. sphaeroides 2.4.1 cells is oxygen sensitive, and very well protected within reverse micelles by the use of combined approach of two cells (R. sphaeroides 2.4.1 and Citrobacter Y19). In this case glucose present in the medium of Citrobacter Y19 serves double roles in enhancing the sustained production rate of hydrogen. Firstly, it quenches the free O{sub 2}liberated as a side product of reaction catalyzed by nitrogenase, which is O{sub 2} labile. Secondly, organic acid produced by this reaction is utilized by the Citrobacter Y19 as organic substrate in

  17. Can increasing adult vaccination rates reduce lost time and increase productivity?

    Science.gov (United States)

    Rittle, Chad

    2014-12-01

    This article addresses limited vaccination coverage by providing an overview of the epidemiology of influenza, pertussis, and pneumonia, and the impact these diseases have on work attendance for the worker, the worker's family, and employer profit. Studies focused on the cost of vaccination programs, lost work time, lost employee productivity and acute disease treatment are discussed, as well as strategies for increasing vaccination coverage to reduce overall health care costs for employers. Communicating the benefits of universal vaccination for employees and their families and combating vaccine misinformation among employees are outlined. Copyright 2014, SLACK Incorporated.

  18. Development of import subtituting technologies for increasing productivity of sintering machines and strength of agglomerates

    Directory of Open Access Journals (Sweden)

    В. Л. Трушко

    2016-11-01

    Full Text Available A problem of industrial fluxed agglomerates self-destruction in the process of cooling after sintering has been examined. It has been revealed that the main reason of strength degradation is polymorphism of dicalcium silicate Ca2SiO4 (or short designation С2S: β-Ca2SiO4 ® γ-Ca2SiO4. Ways for increasing the  agglomerate  strength by physical and crystal-chemical stabilization of the high temperature modification of C2S have been proposed and tested. Physical stabilization of C2S agglomerate is increased with its structure reinforcement due to thickening of walls between large pores that is achieved by increasing height of the sintered layer through improvement of its gas permeability. The task is addressed by substituting the previously used import sintering ore with the  polydisperse ore from the Yakovlevo field, which improves the charge  pelletizing by 3-4 times and helps to bring the  height of the sintered layer and the strength of the domestic agglomerate up to the international best practice standards, while eliminating a need to purchase import high-vacuum   exhausters. In practice crystal-chemical stabilization of C2S within iron-ore  agglomerate is ensured by adding an  opti- mal multicomponent additive in the form of the    waste product  generated in production  of alumina  from bauxites, i.e. the red mud, to the initial sinter charge. Thus mechanical strength of agglomerates and pellets is increased by 5-10 % and their hot strength improves by 20-40 %. The productivity of sintering machines and blast furnaces improves by 5-10 %. Specific coke consumption reduces by 2-2.5 %. In production of iron-ore pellets red mud is substituting the import  bentonite.

  19. The use of light-emitting diodes (LED in commercial layer production

    Directory of Open Access Journals (Sweden)

    R Borille

    2013-06-01

    Full Text Available Artificial lighting is one of the most powerful management tools available to commercial layer producers. Artificial light allows anticipating or delaying the beginning of lay, improving egg production, and optimizing feed efficiency. This study aimed at comparing the performance of commercial layers submitted to lighting using different LED colors or conventional incandescent lamps. The study was carried out in a layer house divided in isolated environments in order to prevent any influenced from the neighboring treatments. In total, 360 Isa Brown layers, with an initial age of 56 weeks, were used. The following light sources were used: blue LED, yellow LED, green LED, red LED, white LED, and 40W incandescent light. Birds in all treatment were submitted to a 17-h continuous lighting program, and were fed a corn and soybean meal-based diet. A completely randomized experimental design with subplots was applied, with 24 treatments (six light sources and four periods of three replicates. Egg production (% was significantly different (p0.05 by light source. It was concluded that the replacement of incandescent light bulbs by white and red LEDs does not cause any negative effect on the egg production of commercial layers.

  20. Layered Electrical Product Application Protocol (AP). Draft: Initial Graphics Exchange Specification (IGES)

    Energy Technology Data Exchange (ETDEWEB)

    1994-09-01

    An application protocol is an information systems engineering view of a specific product. The view represents an agreement on the generic activities needed to design and fabricate the product, the agreement on the information needed to support those activities, and the specific constructs of a product data standard for use in transfering some or all of the information required. This applications protocol describes the data for electrical and electronic products in terms of a product description standard called the Initial Graphics Exchange Specification (IGES). More specifically, the Layered Electrical Product IGES Application Protocol (AP) specifies the mechanisms for defining and exchanging computer-models and their associated data for those products which have been designed in two dimensional geometry so as to be produced as a series of layers in IGES format. The AP defines the appropriateness of the data items for describing the geometry of the various parts of a product (shape and location), the connectivity, and the processing and material characteristics. Excluded is the behavioral requirements which the product was intended to satisfy, except as those requirements have been recorded as design rules or product testing requirements.

  1. Hypocapnia induces caspase-3 activation and increases Abeta production.

    Science.gov (United States)

    Xie, Zhongcong; Moir, Robert D; Romano, Donna M; Tesco, Giuseppina; Kovacs, Dora M; Tanzi, Rudolph E

    2004-01-01

    At least half of all cases of early onset (<60) familial Alzheimer's disease (FAD) are caused by any of over 150 mutations in three genes: the amyloid precursor protein (APP), presenilin 1 (PS1), and presenilin 2 (PS2). Mutant forms of PS1 have been shown to sensitize cells to apoptotic cell death. We investigated the effects of hypocapnia, a risk factor for both cognitive and neurodevelopment deficits, on caspase-3 activation, apoptosis, and amyloid beta-protein (Abeta) production, and assessed the influence of the PS1Delta9 FAD mutation on these effects. For this purpose, we exposed stably transfected H4 human neuroglioma cells to conditions consistent with hypocapnia (PCO2<40 mm Hg) and hypocapnia plus hypoxia (PO2<21%). Hypocapnia (20 mm Hg CO2 for 6 h) induced caspase-3 activation and apoptosis; the PS1Delta9 FAD mutation significantly potentiated these effects. Moreover, the combination of hypocapnia (20 mm Hg CO2) and hypoxia (5%O2) induced caspase-3 activation and apoptosis in a synergistic manner. Hypocapnia (5 and 20 mm Hg CO2 for 6 h) also led to an increased Abeta production. The findings suggest that hypocapnia (e.g. during general anesthesia) could exacerbate AD neuropathogenesis. Copyright (c) 2004 S. Karger AG, Basel.

  2. Production and refining. Increase of Chinese petroleum imports

    International Nuclear Information System (INIS)

    Anon.

    1997-01-01

    China produced 156.5 Mt of petroleum in 1996, from which 56 Mt were extracted from the Daqing oil field, exploited since 1960. About 10% of the crude oil comes from offshore fields. Over the 100 Mt refined in 1996, 20 Mt were imported. The Chinese petroleum products demand should increase to 200 Mt/y by the end of the century with respect to 150 Mt/y in 1997. The Dalian refinery, the first Chinese-foreign joint venture, started to work in November 1996 and should reached its full capacity of 100000 b/day in the first quarter of 1997. The Chinese refining activity has now an excess capacity of 206 Mt/y. Several other joint venture projects in petrochemistry are planned in China. Short paper. (J.S.)

  3. The species richness-productivity relationship in the herb layer of European deciduous forests

    Czech Academy of Sciences Publication Activity Database

    Axmanová, I.; Chytrý, M.; Zelený, D.; Ching-Feng, L.; Vymazalová, M.; Danihelka, Jiří; Horsák, M.; Kočí, M.; Kubešová, S.; Lososová, Z.; Otýpková, Z.; Tichý, L.; Martynenko, V. B.; Baisheva, E. Z.; Schuster, B.; Diekmann, M.

    2012-01-01

    Roč. 21, č. 6 (2012), s. 657-667 ISSN 1466-822X Institutional support: RVO:67985939 Keywords : broad-leaved woodland * diversity - productivity relationship * herb-layer biomass Subject RIV: EF - Botanics Impact factor: 7.223, year: 2012

  4. Productivity of a coral reef using boundary layer and enclosure methods

    Science.gov (United States)

    McGillis, W.R.; Langdon, C.; Loose, B.; Yates, K.K.; Corredor, Jorge

    2011-01-01

    The metabolism of Cayo Enrique Reef, Puerto Rico, was studied using in situ methods during March 2009. Benthic O2 fluxes were used to calculate net community production using both the boundary layer gradient and enclosure techniques. The boundary layer O2 gradient and the drag coefficients were used to calculate productivity ranging from -12.3 to 13.7 mmol O2 m-2 h-1. Productivity measurements from the enclosure method ranged from -11.0 to 12.9 mmol O2 m-2 h-1. During the study, the mean hourly difference between the methods was 0.65 mmol O2 m-2 h-1 (r2 = 0.92), resulting in well-reconciled estimates of net community production between the boundary layer (-33.1 mmol m-2 d-1) and enclosure (-46.3 mmol m-2 d-1) techniques. The results of these independent approaches corroborate quantified rates of metabolism at Cayo Enrique Reef. Close agreement between methods demonstrates that boundary layer measurements can provide near real-time assessments of coral reef health.

  5. PRODUCTIVITY OF LAYERS AND EGG QUALITY IN FREE RANGE AND CAGE SYSTEM OF HOUSING

    Directory of Open Access Journals (Sweden)

    Đ. Senčić

    2006-12-01

    Full Text Available The research was conducted with two groups of Lohmann Brown hybrid layers. Production of eggs lasted for 52 weeks. A control group of layers was kept in the conventional housing system, that is, in cages, while experimental group was kept in the free range system. Layers from the free range system, compared to those kept in cages, laid fewer eggs, (266:295, they consumed more feed on daily basis (129 g : 115 g, more feed per kilogram of egg weight (2.83 kg : 2.35 kg, they had higher mortality rate (6.80 % : 5.50 % and lower end of lay body weight (1.95 kg : 2.10 kg. Eggs from free range layers, compared to those from the cages system, had significantly (P0.05 were determined between the free range and the cages system of housing hens. Considering somewhat lower productivity and higher mortality rate of hens, higher feed consumption per kilogram of egg mass, but also better quality of eggs, profitability of egg production in the free range system will depend, to the maximum extent, on market evaluation of the production.

  6. Measures for Increasing of Company’s Production Capacity

    OpenAIRE

    Ernesta Žikevičiūtė; Irena Zabielavičienė

    2012-01-01

    Production capacity improvements are poorly explored areas of economic literature and the existing methods are difficult to apply. For this reason, the organization has only a superficial analysis of capacity, but after all this time, each production company had to improve the production capacity for the market economy and the most economical use of production factors.This article explores the company’s production capacity for better use of tools. It also presents the capacity of their conce...

  7. Low-dielectric layer increases nanosecond electric discharges in distilled water

    KAUST Repository

    Hamdan, Ahmad; Cha, Min

    2016-01-01

    decreasing of the energy consumption are the main goals of today’s research. Here we present an experimental study of nanosecond discharge in distilled water covered by a layer of dielectric material. We demonstrate through this paper that the discharge

  8. Thin-layer boilover in diesel-oil fires: Determining the increase of thermal hazards and safety distances

    International Nuclear Information System (INIS)

    Ferrero, Fabio; Munoz, Miguel; Arnaldos, Josep

    2007-01-01

    A study of the effects of thin-layer boilover on large hydrocarbon fires was carried out. In the experiments, diesel-oil was burned in pools with diameters ranging from 1.5 to 6 m. Previous models used to predict emissive power during the stationary state were analysed and successively modified in order to accurately predict thermal hazard during the water ebullition phase. It was discovered that the increase in emissive power during thin-layer boilover is greater when the pool diameter is smaller. Furthermore, the required increases in safety distances in the case of accidents involving this dangerous phenomenon are provided

  9. Measures for Increasing of Company’s Production Capacity

    Directory of Open Access Journals (Sweden)

    Ernesta Žikevičiūtė

    2012-07-01

    Full Text Available Production capacity improvements are poorly explored areas of economic literature and the existing methods are difficult to apply. For this reason, the organization has only a superficial analysis of capacity, but after all this time, each production company had to improve the production capacity for the market economy and the most economical use of production factors.This article explores the company’s production capacity for better use of tools. It also presents the capacity of their concept, establishment, evaluates the factors leading to their production capacity, for developing efficiency measures and model presentation.Article in Lithuanian

  10. The influence of calcium and phosphorus levels on egg production, egg quality, tibia weight and 32P retention of layers

    International Nuclear Information System (INIS)

    Edwardly, Y.S.; Hendratno, C.; Yuyu Wahyu

    1979-01-01

    An experiment was conducted to study the influence of three levels of calcium and three levels of dietary phosphorus on egg production, egg quality, tibia weight and 32 P retention of layers. Calcium levels of 3.0; 3.5 and 4.0 percent were used and phosphorus contest of the diet fed were either 0.6; 0.9 or 1.2 percent.Egg production was highest with rations containing 3.5% calcium and 0.9% phosphorus. A significant increase in egg production was found at 0.9% levels of phosphorus compared to levels of 0.6 and 1.2%. Egg quality was increased significantly (p 32 P retention was low at the highest calcium level. (author)

  11. Use of natural zeolite-supplemented litter increased broiler production

    African Journals Online (AJOL)

    smyo

    aimed at elucidating the effects of combinations of these products as litter on poultry production, such as .... The bulbs on the ceiling were used ... sample, curved fibrous and acicular mordenites were derived from volcanic glass (Figure 2b).

  12. Vertical leaf mass per area gradient of mature sugar maple reflects both height-driven increases in vascular tissue and light-driven increases in palisade layer thickness.

    Science.gov (United States)

    Coble, Adam P; Cavaleri, Molly A

    2017-10-01

    A key trait used in canopy and ecosystem function modeling, leaf mass per area (LMA), is influenced by changes in both leaf thickness and leaf density (LMA = Thickness × Density). In tall trees, LMA is understood to increase with height through two primary mechanisms: (i) increasing palisade layer thickness (and thus leaf thickness) in response to light and/or (ii) reduced cell expansion and intercellular air space in response to hydrostatic constraints, leading to increased leaf density. Our objective was to investigate within-canopy gradients in leaf anatomical traits in order to understand environmental factors that influence leaf morphology in a sugar maple (Acer saccharum Marshall) forest canopy. We teased apart the effects of light and height on anatomical traits by sampling at exposed and closed canopies that had different light conditions at similar heights. As expected, palisade layer thickness responded strongly to cumulative light exposure. Mesophyll porosity, however, was weakly and negatively correlated with light and height (i.e., hydrostatic gradients). Reduced mesophyll porosity was not likely caused by limitations on cell expansion; in fact, epidermal cell width increased with height. Palisade layer thickness was better related to LMA, leaf density and leaf thickness than was mesophyll porosity. Vein diameter and fraction of vascular tissue also increased with height and LMA, density and thickness, revealing that greater investment in vascular and support tissue may be a third mechanism for increased LMA with height. Overall, decreasing mesophyll porosity with height was likely due to palisade cells expanding into the available air space and also greater investments in vascular and support tissue, rather than a reduction of cell expansion due to hydrostatic constraints. Our results provide evidence that light influences both palisade layer thickness and mesophyll porosity and indicate that hydrostatic gradients influence leaf vascular and support

  13. Mechanical properties of layers of corrosion products at steel / concrete interface

    International Nuclear Information System (INIS)

    Dehoux, Anita

    2012-01-01

    To take account of the development of corrosion products layers in residual lifetime calculations of reinforced concrete structures requires a good knowledge of the mechanical properties of these products. Our study aims to determine the mechanical properties of layers of corrosion products. The approach consists of an identification of the microstructure properties complemented by homogenization calculations to calculate a mesoscopic behavior in linear elasticity of layers of corrosion products. The study includes a series of experimental campaigns at the microscopic scale. Vickers micro indentation tests analyzed by a Gaussian mixture model approach allowed the acquisition of hardness and elastic moduli at the microscale. An identification of the microstructure products is performed by Raman microspectrometry. The microstructure's characterization brings valuable information for homogenization calculations. The first approach has consisted of calculations of random media homogenization by self-consistent and generalized self-consistent schemes. In the second approach, effective modulus calculations were performed using numerical microstructures resulting from 2D images taken with an optical microscope. The corpus is composed of samples of different ages and origins, their microstructures were compared. (author) [fr

  14. Applying a biodeposition layer to increase the bond of a repair mortar on a mortar substrate

    OpenAIRE

    Snoeck, Didier; Wang, Jianyun; Bentz, D. P.; De Belie, Nele

    2018-01-01

    One of the major concerns in infrastructure repair is a sufficient bond between the substrate and the repair material, especially for the long-term performance and durability of the repaired structure. In this study, the bond of the repair material on the mortar substrate is promoted via the biodeposition of a calcium carbonate layer by a ureolytic bacterium. X-ray diffraction and scanning electron microscopy were used to examine the interfaces between the repair material and the substrate, a...

  15. Multi-Shaped Ag Nanoparticles in the Plasmonic Layer of Dye-Sensitized Solar Cells for Increased Power Conversion Efficiency

    Directory of Open Access Journals (Sweden)

    Da Hyun Song

    2017-06-01

    Full Text Available The use of dye-sensitized solar cells (DSSCs is widespread owing to their high power conversion efficiency (PCE and low cost of manufacturing. We prepared multi-shaped Ag nanoparticles (NPs and introduced them into DSSCs to further enhance their PCE. The maximum absorption wavelength of the multi-shaped Ag NPs is 420 nm, including the shoulder with a full width at half maximum (FWHM of 121 nm. This is a broad absorption wavelength compared to spherical Ag NPs, which have a maximum absorption wavelength of 400 nm without the shoulder of 61 nm FWHM. Therefore, when multi-shaped Ag NPs with a broader plasmon-enhanced absorption were coated on a mesoporous TiO2 layer on a layer-by-layer structure in DSSCs, the PCE increased from 8.44% to 10.22%, equivalent to an improvement of 21.09% compared to DSSCs without a plasmonic layer. To confirm the plasmon-enhanced effect on the composite film structure in DSSCs, the PCE of DSSCs based on the composite film structure with multi-shaped Ag NPs increased from 8.58% to 10.34%, equivalent to an improvement of 20.51% compared to DSSCs without a plasmonic layer. This concept can be applied to perovskite solar cells, hybrid solar cells, and other solar cells devices.

  16. The increase of apatite layer formation by the poly(3-hydroxybutyrate) surface modification of hydroxyapatite and β-tricalcium phosphate.

    Science.gov (United States)

    Szubert, M; Adamska, K; Szybowicz, M; Jesionowski, T; Buchwald, T; Voelkel, A

    2014-01-01

    The aim of this study was the surface modification of hydroxyapatite and β-tricalcium phosphate by poly(3-hydroxybutyrate) grafting and characterization of modificates. The bioactivity examination was carried out by the determination to grow an apatite layer on modified materials during incubation in simulated body fluid at 37°C. The additional issue taken up in this paper was to investigate the influence of fluid replacement. The process of the surface modification of biomaterials was evaluated by means of infrared and Raman spectroscopy. Formation of the apatite layer was assessed by means of scanning electron microscopy and confirmed by energy dispersive, Raman and Fourier transformed infrared spectroscopy. During exposure in simulated body fluid, the variation of the zeta potential, pH measurement and relative weight was monitored. Examination of scanning electron microscopy micrographs suggests that modification of hydroxyapatite and β-tricalcium phosphate by poly(3-hydroxybutyrate) significantly increases apatite layer formation. Raman spectroscopy evaluation revealed that the formation of the apatite layer was more significant in the case of hydroxyapatite modificate, when compared to the β-tricalcium phosphate modificate. Both modificates were characterized by stable pH, close to the natural pH of human body fluids. Furthermore, we have shown that a weekly changed, simulated body fluid solution increases apatite layer formation. © 2013.

  17. Forage seeding in rangelands increases production and prevents weed invasion

    Directory of Open Access Journals (Sweden)

    Josh Davy

    2017-07-01

    Full Text Available Increasing forage productivity in the Sierra foothill rangelands would help sustain the livestock industry as land availability shrinks and lease rates rise, but hardly any studies have been done on forage selections. From 2009 to 2014, in one of the first long-term and replicated studies of seeding Northern California's Mediterranean annual rangeland, we compared the cover of 22 diverse forages to determine their establishment and survivability over time. Among the annual herbs, forage brassica (Brassica napus L. and chicory (Cichorium intybus L. proved viable options. Among the annual grasses, soft brome (Bromus hordeaceus and annual ryegrass (Lolium multiflorum performed well. However, these species will likely require frequent reseeding to maintain dominance. Long-term goals of sustained dominant cover (> 3 years are best achieved with perennial grasses. Perennial grasses that persisted with greater than 50% cover were Berber orchardgrass (Dactylis glomerata, Flecha tall fescue (Lolium arundinaceum and several varieties of hardinggrass (Phalaris aquatica L., Perla koleagrass, Holdfast, Advanced AT. In 2014, these successful perennials produced over three times more dry matter (pounds per acre than the unseeded control and also suppressed annual grasses and yellow starthistle (Centaurea solstitialis L. cover.

  18. Leveraging Subsidence in Permafrost with Remotely Sensed Active Layer Thickness (ReSALT) Products

    Science.gov (United States)

    Schaefer, K. M.; Chen, A.; Chen, J.; Chen, R. H.; Liu, L.; Michaelides, R. J.; Moghaddam, M.; Parsekian, A.; Tabatabaeenejad, A.; Thompson, J. A.; Zebker, H. A.; Meyer, F. J.

    2017-12-01

    The Remotely Sensed Active Layer Thickness (ReSALT) product uses the Interferometric Synthetic Aperture Radar (InSAR) technique to measure ground subsidence in permafrost regions. Seasonal subsidence results from the expansion of soil water into ice as the surface soil or active layer freezes and thaws each year. Subsidence trends result from large-scale thaw of permafrost and from the melting and subsequent drainage of excess ground ice in permafrost-affected soils. The attached figure shows the 2006-2010 average seasonal subsidence from ReSALT around Barrow, Alaska. The average active layer thickness (the maximum surface thaw depth during summer) is 30-40 cm, resulting in an average seasonal subsidence of 1-3 cm. Analysis of the seasonal subsidence and subsidence trends provides valuable insights into important permafrost processes, such as the freeze/thaw of the active layer, large-scale thawing due to climate change, the impact of fire, and infrastructure vulnerability. ReSALT supports the Arctic-Boreal Vulnerability Experiment (ABoVE) field campaign in Alaska and northwest Canada and is a precursor for a potential NASA-ISRO Synthetic Aperture Radar (NISAR) product. ReSALT includes uncertainties for all parameters and is validated against in situ measurements from the Circumpolar Active Layer Monitoring (CALM) network, Ground Penetrating Radar and mechanical probe measurements. Here we present examples of ReSALT products in Alaska to highlight the untapped potential of the InSAR technique to understand permafrost dynamics, with a strong emphasis on the underlying processes that drive the subsidence.

  19. Limestone and oyster shell for brown layers in their second egg production cycle

    Directory of Open Access Journals (Sweden)

    CC Pizzolante

    2011-06-01

    Full Text Available This study aimed at evaluating the effect of dietary calcium levels and the replacement of calcium sources with different particle size compositions on the performance and egg quality of brown layers in their second egg production cycle. A randomized block experimental design was applied with 12 treatments in a 3x4 factorial arrangement: three calcium levels (2.6, 3.2, 3.8 % and four combinations of calcium sources (1- 100% fine limestone (FL, 2- 50% FL + 50% coarse limestone (CL, 3- 50% FL and 50% oyster shell (OS, 4- 50% FL and 25% CL+ 25 %OS, with six replicates of eight birds each. Calcium sources were analyzed for geometric mean diameter (GMD and in-vitro solubility. The following performance and egg quality parameters were evaluated: egg weight (EW, g, egg production (% Eggs, egg mass (EM %, feed intake (FI g, feed conversion ratio (FCR kg/dz and FCR kg/kg, mortality (% Mort., specific egg gravity (SG, percentages of yolk (Y%, albumen (Alb% and eggshell (ES%, eggshell thickness (EST, eggshell breaking strength (BS, eggshell weight per surface area (EWSA, Haugh unit (HU, yolk index (YI and yolk color. Performance and internal egg quality were not affected by the treatments (p>0.05. Blocks had a significant effect on (p<0.05 FI and FCR (kg/dz and kg/kg. Treatments significantly influenced external egg quality, which improved as dietary calcium levels increases and when up to 50% fine limestone was replaced by combinations of coarse limestone with oyster shell.

  20. Manipulation of the rumen to increase ruminant production

    International Nuclear Information System (INIS)

    Nolan, J.V.; Leng, R.A.

    1989-01-01

    Manipulation of the rumen should be undertaken with a view to optimizing the supply of specific nutrients to the host animal. Especially important are the volatile fatty acids (glucogenic and non-glucogenic), and dietary and bypass amino acids and lipids. The animal's requirement for these nutrients varies according to its physiological state (growing, pregnant or lactating), its health (disease or parasite load), previous dietary history and also the prevailing climatic conditions. Often the availability of total protein (amino acids) relative to oxidizable substrates (the protein/energy or P/E ratio) is the primary limitation to voluntary feed intake and to efficient use of absorbed nutrients. In these instances, the first objective should be to maximize the yield of microbial amino acids from the rumen by manipulations that increase the net efficiency of microbial synthesis, e.g. by altering methods of feed processing, supplementing with urea and minerals, or eliminating protozoa. Further improvements in the P/E ratio can be attained by supplementing the animal with a dietary protein source with good rumen bypass characteristics in order to provide additional amino acids for intestinal absorption. Other potential manipulations of the rumen include the use of chemicals to modify rumen fermentation patterns and supplementation with long chain fatty acids (LCFA) (as a dense source of energy supplying substrate) in rumen-inert forms (e.g. as Ca-LCFA). However, when energy dense dietary supplements are given, it may be necessary to include a bypass protein source to maintain the P/E ratio. Novel possibilities for manipulation include the use of molecular biology techniques to create microorganisms with enhanced production of enzymes that promote degradation of structural carbohydrates, or with an ability to secrete chemicals that are toxic to protozoa. (author). 68 refs, 4 figs, 1 tab

  1. The use of propolis to increase productivity of Peranakan Ongole

    Directory of Open Access Journals (Sweden)

    Budi Haryanto

    2012-10-01

    Full Text Available Propolis is a complex substance found in the bee hives and it has medicinal advantages for many diseases. It contains various chemicals with specific characteristics such as anti cancer, anti virus, anti fungi and anti bacteria. Propolis contains antioxydant. Propolis from Trigona spp. was used in the present experiment. Eighteen (18 heads of PO (Ongole grade cattle were individually fed in a flock housing and randomized to receive each feeding treatment. Propolis supplements were given in a mixture with the concentrate. Similar concentrate was fed to all individuals. Three feeding treatments, i.e., R0 = Control, without propolis, R1 = nano-propolis extracted with ethanol, and offered at 2% every 7 days, and R2 = raw propolis were applied. Concentrate intake was recorded daily by substracting the orts from the quantity of offered feed. Individual weight changes were recorded monthly before morning feeding time to calculate the average daily weight gain. The results indicated positive responses to feeding nano-propolis or raw-propolis as compared to the control group. Raw-propolis seemed to be better than the nano-propolis. Concentrate intake in the control group was higher than in the propolis supplemented group. The concentrate intake may reach 7-8 kg/head/day in average, while the average daily weight gain may reach 1 kg. The average daily weight gain of individuals supplemented with propolis were 8-11% over the control group. However, if these values were compared to the ADG of PO cattle in villages (0.6 kg/day, it was more than 30% than the general performance. It was concluded that the use of propolis, either prepared by nano-technology or just raw-propolis, can be applied to increase the PO cattle productivity.

  2. Increasing Onshore Oil Production: An Unexpected Explosion in Trauma Patients.

    Science.gov (United States)

    Urban, Dakota M; Ward, Jeanette G; Helmer, Stephen D; Cook, Alan D; Haan, James M

    2018-05-01

    Few data currently exist which are focused on type and severity of onshore oil extraction-related injuries. The purpose of this study was to evaluate injury patterns among onshore oil field operations. A retrospective review was conducted of all trauma patients aged 18 and older with an onshore oil field-related injury admitted to an American College of Surgeons-verified level 1 trauma center between January 1, 2003 and June 30, 2012. Data collected included demographics, injury severity and details, hospital outcomes, and disposition. A total of 66 patients met inclusion criteria. All patients were male, of which the majority were Caucasian (81.8%, n = 54) with an average age of 36.5 ± 11.8 years, injury severity score of 9.4 ± 8.9, and Glasgow Coma Scale score of 13.8 ± 3.4. Extremity injuries were the most common (43.9%, n = 29), and most were the result of being struck by an object (40.9%, n = 27). Approximately one-third of patients (34.8%, n = 23) were admitted to the intensive care unit. Nine patients (13.6%) required mechanical ventilation while 27 (40.9%) underwent operative treatment. The average hospital length of stay was 5.8 ± 16.6 days, and most patients (78.8%, n = 52) were discharged home. Four patients suffered permanent disabilities, and there were two deaths. Increased domestic onshore oil production inevitably will result in higher numbers of oil field-related traumas. By focusing on employees who are at the greatest risk for injuries and by targeting the main causes of injuries, training programs can lead to a decrease in injury incidence.

  3. Increase in transmission loss of single panels by addition of mass inclusions to a poro-elastic layer: Experimental investigation

    Science.gov (United States)

    Kidner, M. R. F.; Fuller, C. R.; Gardner, B.

    2006-06-01

    The insertion loss of standard acoustic blankets can be significantly improved at low frequencies by the addition of randomly placed mass inclusions to the poro-elastic layers. The improvement is much greater than that due to the mass effect alone. The mass inclusions act as resonant systems and so increase the structure impedance. This paper reports the results of experimental investigations into this phenomenon. Increases in insertion loss of 15 dB in the 100 Hz third octave band are reported.

  4. Productivity Continued to Increase in Many Industries during 1984.

    Science.gov (United States)

    Herman, Arthur S.

    1986-01-01

    Productivity, as measured by output per employee hour, grew in 1984 in about three quarters of the industries for which the Bureau of Labor Statistics regularly publishes data. (A table shows productivity trends in industries measured by the Bureau, including mining, transportation and utilities, and trade and services.) (CT)

  5. Retinal layer location of increased retinal thickness in eyes with subclinical and clinical macular edema in diabetes type 2

    DEFF Research Database (Denmark)

    Bandello, Francesco; Tejerina, Amparo Navea; Vujosevic, Stela

    2015-01-01

    PURPOSE: To identify the retinal layer predominantly affected in eyes with subclinical and clinical macular edema in diabetes type 2. METHODS: A cohort of 194 type 2 diabetic eyes/patients with mild nonproliferative diabetic retinopathy (ETDRS levels 20/35) were examined with Cirrus spectral......-domain optical coherence tomography (OCT) at the baseline visit (ClinicalTrials.gov identifier: NCT01145599). Automated segmentation of the retinal layers of the eyes with subclinical and clinical macular edema was compared with a sample of 31 eyes from diabetic patients with normal OCT and an age......-matched control group of 58 healthy eyes. RESULTS: From the 194 eyes in the study, 62 had subclinical macular edema and 12 had clinical macular edema. The highest increases in retinal thickness (RT) were found in the inner nuclear layer (INL; 33.6% in subclinical macular edema and 81.8% in clinical macular edema...

  6. The increase of apatite layer formation by the poly(3-hydroxybutyrate) surface modification of hydroxyapatite and β-tricalcium phosphate

    Energy Technology Data Exchange (ETDEWEB)

    Szubert, M., E-mail: mm.szubert@gmail.com [Faculty of Chemical Technology, Poznan University of Technology, Poznan (Poland); Adamska, K. [Faculty of Chemical Technology, Poznan University of Technology, Poznan (Poland); Szybowicz, M. [Faculty of Technical Physics, Poznan University of Technology, Poznan (Poland); Jesionowski, T. [Faculty of Chemical Technology, Poznan University of Technology, Poznan (Poland); Buchwald, T. [Faculty of Technical Physics, Poznan University of Technology, Poznan (Poland); Voelkel, A. [Faculty of Chemical Technology, Poznan University of Technology, Poznan (Poland)

    2014-01-01

    The aim of this study was the surface modification of hydroxyapatite and β-tricalcium phosphate by poly(3-hydroxybutyrate) grafting and characterization of modificates. The bioactivity examination was carried out by the determination to grow an apatite layer on modified materials during incubation in simulated body fluid at 37 °C. The additional issue taken up in this paper was to investigate the influence of fluid replacement. The process of the surface modification of biomaterials was evaluated by means of infrared and Raman spectroscopy. Formation of the apatite layer was assessed by means of scanning electron microscopy and confirmed by energy dispersive, Raman and Fourier transformed infrared spectroscopy. During exposure in simulated body fluid, the variation of the zeta potential, pH measurement and relative weight was monitored. Examination of scanning electron microscopy micrographs suggests that modification of hydroxyapatite and β-tricalcium phosphate by poly(3-hydroxybutyrate) significantly increases apatite layer formation. Raman spectroscopy evaluation revealed that the formation of the apatite layer was more significant in the case of hydroxyapatite modificate, when compared to the β-tricalcium phosphate modificate. Both modificates were characterized by stable pH, close to the natural pH of human body fluids. Furthermore, we have shown that a weekly changed, simulated body fluid solution increases apatite layer formation. - Highlights: • Surface modification of HA and β-TCP was performed by PHB grafting. • The growth of apatite layer on materials was examined in simulated body fluid (SBF). • The bioactivity of obtained materials was proved. • The replacement of SBF solution plays an important role in the process of apatite formation.

  7. The increase of apatite layer formation by the poly(3-hydroxybutyrate) surface modification of hydroxyapatite and β-tricalcium phosphate

    International Nuclear Information System (INIS)

    Szubert, M.; Adamska, K.; Szybowicz, M.; Jesionowski, T.; Buchwald, T.; Voelkel, A.

    2014-01-01

    The aim of this study was the surface modification of hydroxyapatite and β-tricalcium phosphate by poly(3-hydroxybutyrate) grafting and characterization of modificates. The bioactivity examination was carried out by the determination to grow an apatite layer on modified materials during incubation in simulated body fluid at 37 °C. The additional issue taken up in this paper was to investigate the influence of fluid replacement. The process of the surface modification of biomaterials was evaluated by means of infrared and Raman spectroscopy. Formation of the apatite layer was assessed by means of scanning electron microscopy and confirmed by energy dispersive, Raman and Fourier transformed infrared spectroscopy. During exposure in simulated body fluid, the variation of the zeta potential, pH measurement and relative weight was monitored. Examination of scanning electron microscopy micrographs suggests that modification of hydroxyapatite and β-tricalcium phosphate by poly(3-hydroxybutyrate) significantly increases apatite layer formation. Raman spectroscopy evaluation revealed that the formation of the apatite layer was more significant in the case of hydroxyapatite modificate, when compared to the β-tricalcium phosphate modificate. Both modificates were characterized by stable pH, close to the natural pH of human body fluids. Furthermore, we have shown that a weekly changed, simulated body fluid solution increases apatite layer formation. - Highlights: • Surface modification of HA and β-TCP was performed by PHB grafting. • The growth of apatite layer on materials was examined in simulated body fluid (SBF). • The bioactivity of obtained materials was proved. • The replacement of SBF solution plays an important role in the process of apatite formation

  8. Bifunctional polymer hydrogel layers as forward osmosis draw agents for continuous production of fresh water using solar energy.

    Science.gov (United States)

    Razmjou, Amir; Liu, Qi; Simon, George P; Wang, Huanting

    2013-11-19

    The feasibility of bilayer polymer hydrogels as draw agent in forward osmosis process has been investigated. The dual-functionality hydrogels consist of a water-absorptive layer (particles of a copolymer of sodium acrylate and N-isopropylacrylamide) to provide osmotic pressure, and a dewatering layer (particles of N-isopropylacrylamide) to allow the ready release of the water absorbed during the FO drawing process at lower critical solution temperature (32 °C). The use of solar concentrated energy as the source of heat resulted in a significant increase in the dewatering rate as the temperature of dewatering layer increased to its LSCT more rapidly. Dewatering flux rose from 10 to 25 LMH when the solar concentrator increased the input energy from 0.5 to 2 kW/m(2). Thermodynamic analysis was also performed to find out the minimum energy requirement of such a bilayer hydrogel-driven FO process. This study represents a significant step forward toward the commercial implementation of hydrogel-driven FO system for continuous production of fresh water from saline water or wastewaters.

  9. Increasing productivity based on quality management: Baked goods sector example

    DEFF Research Database (Denmark)

    Herbert-Hansen, Zaza Nadja Lee; Jacobsen, Peter

    2014-01-01

    This paper investigates productivity and quality management challenges in the food industry, illustrated by a case study of an SME-sized company in the Danish baked goods sector. Companies in the food industry are faced with challenges related to short shelf-life and changing customer demands...... as well as intense cost pressures. Quality control is largely manual and often based on the bakers’ intuition. Problems with reusing dough, production stops and quality issues contribute towards waste. This paper addresses the research question “Is there a relation between the dough, production stops...... through improved quality management are detailed. The paper concludes with recommendations for further research....

  10. Effects of production parameters on the structure of resol type phenolic resin/layered silicate nanocomposites

    NARCIS (Netherlands)

    Kaynak, C.; Tasan, C.C.

    2006-01-01

    Polymer/layered silicate nanocomposites belong to one of the most promising group of materials of the past few decades and most probably for the near future. Following the pioneering works of Toyota Research Group in the 1980s, the interest on these materials increased rapidly and research is now

  11. ​Improving potato production for increased food security of ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    One of the biggest threats to potato production is late blight disease, which requires ... an ancestral recipes handbook; a manual for technical management of new ... Development and validation of a liquid chromatographic method to quantify ...

  12. Crossbreeding to increase beef production: additive and non ...

    African Journals Online (AJOL)

    GScholtz

    2013-06-06

    Jun 6, 2013 ... indicus x taurus direct heterosis effects on all weight traits were greater than .... An important advantage of partitioning breed effects as described above is .... value-unit of products under varying management and marketing ...

  13. How can the productivity of Indonesian cocoa farms be increased?

    NARCIS (Netherlands)

    Tothmihaly, A.; Ingram, V.J.

    2017-01-01

    This study investigates the Indonesian cocoa production to reveal the possibilities for poverty alleviation while considering the threats to environmental sustainability. We estimate, based on a large household panel data set and stochastic frontier analysis, the technical efficiency of cocoa

  14. LHCSR Expression under HSP70/RBCS2 Promoter as a Strategy to Increase Productivity in Microalgae

    Directory of Open Access Journals (Sweden)

    Federico Perozeni

    2018-01-01

    Full Text Available Microalgae are unicellular photosynthetic organisms considered as potential alternative sources for biomass, biofuels or high value products. However, limited biomass productivity is commonly experienced in their cultivating system despite their high potential. One of the reasons for this limitation is the high thermal dissipation of the light absorbed by the outer layers of the cultures exposed to high light caused by the activation of a photoprotective mechanism called non-photochemical quenching (NPQ. In the model organism for green algae Chlamydomonas reinhardtii, NPQ is triggered by pigment binding proteins called light-harvesting-complexes-stress-related (LHCSRs, which are over-accumulated in high light. It was recently reported that biomass productivity can be increased both in microalgae and higher plants by properly tuning NPQ induction. In this work increased light use efficiency is reported by introducing in C. reinhardtii a LHCSR3 gene under the control of Heat Shock Protein 70/RUBISCO small chain 2 promoter in a npq4 lhcsr1 background, a mutant strain knockout for all LHCSR genes. This complementation strategy leads to a low expression of LHCSR3, causing a strong reduction of NPQ induction but is still capable of protecting from photodamage at high irradiance, resulting in an improved photosynthetic efficiency and higher biomass accumulation.

  15. LHCSR Expression under HSP70/RBCS2 Promoter as a Strategy to Increase Productivity in Microalgae.

    Science.gov (United States)

    Perozeni, Federico; Stella, Giulio Rocco; Ballottari, Matteo

    2018-01-05

    Microalgae are unicellular photosynthetic organisms considered as potential alternative sources for biomass, biofuels or high value products. However, limited biomass productivity is commonly experienced in their cultivating system despite their high potential. One of the reasons for this limitation is the high thermal dissipation of the light absorbed by the outer layers of the cultures exposed to high light caused by the activation of a photoprotective mechanism called non-photochemical quenching (NPQ). In the model organism for green algae Chlamydomonas reinhardtii , NPQ is triggered by pigment binding proteins called light-harvesting-complexes-stress-related (LHCSRs), which are over-accumulated in high light. It was recently reported that biomass productivity can be increased both in microalgae and higher plants by properly tuning NPQ induction. In this work increased light use efficiency is reported by introducing in C. reinhardtii a LHCSR3 gene under the control of Heat Shock Protein 70 / RUBISCO small chain 2 promoter in a npq4 lhcsr1 background, a mutant strain knockout for all LHCSR genes. This complementation strategy leads to a low expression of LHCSR3 , causing a strong reduction of NPQ induction but is still capable of protecting from photodamage at high irradiance, resulting in an improved photosynthetic efficiency and higher biomass accumulation.

  16. Bucket Brigades to Increase Productivity in a Luxury Assembly Line

    OpenAIRE

    Carlo, Filippo De; Borgia, Orlando; Tucci, Mario

    2013-01-01

    One of the most challenging issues in manual assembly lines is to achieve the best balance of workloads. There are many analytic approaches to solve this problem, but they are often neglected, since they are time-consuming and require high level engineering skills. Fashion bags packaging lines must comply with a number of different products with low production volumes, while the organization of the line is often under the mere responsibility of the foreman, who balances workloads in an empiri...

  17. Nigeria's oil production and the need for increased producing capacity

    International Nuclear Information System (INIS)

    Okoroji, C. E. I.

    1998-01-01

    After 40 years of commercial oil production, Nigeria's crude oil production is moving through difficult times. This transition period has been made more difficult because of recurring international economic recession, lack-luster crude prices, and slow oil demand growth and Government funding problems etc. Crude oil remains the most important export revenue earner in Nigeria, and more efforts are required to encourage higher output levels to support more foreign exchange generation. Nigeria's crude oil production at present stands at 2.2 million barrels per day (mbpd). This study, covers the period 1998-2005, during which oil production is forecast to grow to about 2.85 mbpd while potential for new discoveries could raise production to more than 3.0 mbpd. These projected rates could depend to a large extent on the rate and size of new discoveries. However, Nigeria's crude oil potential is being constrained by both lack of infrastructure and inadequate investment. The massive investment needed to raise the country's productive capacity will require foreign capital, yet the current fiscal environment leaves much to be desired. The purpose of this paper is to present a review of Nigeria's past, present and future oil production. To meet the projected production capacity very early in the next millennium, current estimates put the overall potential investment needed for an accelerated capacity-expansion drive in order to ensure that there is adequate cushion of crude potential at $19.7 billion during the next seven years. Furthermore, not more than $12.0 billion of this requirement can be generated from Nigeria's government cash flow

  18. Interlayer catalytic exfoliation realizing scalable production of large-size pristine few-layer graphene

    OpenAIRE

    Geng, Xiumei; Guo, Yufen; Li, Dongfang; Li, Weiwei; Zhu, Chao; Wei, Xiangfei; Chen, Mingliang; Gao, Song; Qiu, Shengqiang; Gong, Youpin; Wu, Liqiong; Long, Mingsheng; Sun, Mengtao; Pan, Gebo; Liu, Liwei

    2013-01-01

    Mass production of reduced graphene oxide and graphene nanoplatelets has recently been achieved. However, a great challenge still remains in realizing large-quantity and high-quality production of large-size thin few-layer graphene (FLG). Here, we create a novel route to solve the issue by employing one-time-only interlayer catalytic exfoliation (ICE) of salt-intercalated graphite. The typical FLG with a large lateral size of tens of microns and a thickness less than 2?nm have been obtained b...

  19. Measuring Gene Expression in Bombarded Barley Aleurone Layers with Increased Throughput.

    Science.gov (United States)

    Uwase, Grace; Enrico, Taylor P; Chelimo, David S; Keyser, Benjamin R; Johnson, Russell R

    2018-03-30

    The aleurone layer of barley grains is an important model system for hormone-regulated gene expression in plants. In aleurone cells, genes required for germination or early seedling development are activated by gibberellin (GA), while genes associated with stress responses are activated by abscisic acid (ABA). The mechanisms of GA and ABA signaling can be interrogated by introducing reporter gene constructs into aleurone cells via particle bombardment, with the resulting transient expression measured using enzyme assays. An improved protocol is reported that partially automates and streamlines the grain homogenization step and the enzyme assays, allowing significantly more throughput than existing methods. Homogenization of the grain samples is carried out using an automated tissue homogenizer, and GUS (β-glucuronidase) assays are carried out using a 96-well plate system. Representative results using the protocol suggest that phospholipase D activity may play an important role in the activation of HVA1 gene expression by ABA, through the transcription factor TaABF1.

  20. Increased Capacity for Work and Productivity After Breast Reduction.

    Science.gov (United States)

    Cabral, Isaias Vieira; Garcia, Edgard da Silva; Sobrinho, Rebecca Neponucena; Pinto, Natália Lana Larcher; Juliano, Yara; Veiga-Filho, Joel; Ferreira, Lydia Masako; Veiga, Daniela Francescato

    2017-01-01

    Breast hypertrophy is a prevalent condition among women worldwide, which can affect different aspects of their quality of life. The physical and emotional impact of breast hypertrophy may harm daily activities, including work. To assess the impact of reduction mammaplasty on the ability to work and productivity of women with breast hypertrophy. A total of 60 patients with breast hypertrophy, already scheduled for breast reduction, aged 18 to 60 years and who had formal or autonomous employment were prospectively enrolled. The Brazilian versions of two validated tools, Work Productivity and Activity Impairment - General Health (WPAI-GH) and Work Limitations Questionnaire (WLQ) were self-administered at the preoperative evaluation and six months following surgery. The median age was 33 years, median body mass index was 24 kg/m 2 , and the median total weight of resected breast tissue was 617.5 g. According to the Brazilian classification of occupation, most patients (53%) had technical, scientific, artistic and similar occupations. There was a significant improvement in work capacity and productivity six months after the reduction mammaplasty, denoted by a decrease in presenteeism, absenteeism, and WLQ Productivity Loss Score (Wilcoxon analysis of variance: P work capacity and productivity of Brazilian women with breast hypertrophy. LEVEL OF EVIDENCE 4. © 2016 The American Society for Aesthetic Plastic Surgery, Inc. Reprints and permission: journals.permissions@oup.com.

  1. Brine migration resulting from pressure increases in a layered subsurface system

    Science.gov (United States)

    Delfs, Jens-Olaf; Nordbeck, Johannes; Bauer, Sebastian

    2016-04-01

    Brine originating from the deep subsurface impairs parts of the freshwater resources in the North German Basin. Some of the deep porous formations (esp. Trias and Jurassic) exhibit considerable storage capacities for waste fluids (CO2, brine from oil production or cavern leaching), raising concerns among water providers that this type of deep subsurface utilization might impair drinking water supplies. On the one hand, overpressures induced by fluid injections and the geothermal gradient support brine migration from deep into shallow formations. On the other hand, the rising brine is denser than the surrounding less-saline formation waters and, therefore, tends to settle down. Aim of this work is to investigate the conditions under which pressurized formation brine from deep formations can reach shallow freshwater resources. Especially, the role of intermediate porous formations between the storage formation and the groundwater is studied. For this, complex thermohaline simulations using a coupled numerical process model are necessary and performed in this study, in which fluid density depends on fluid pressure, temperature and salt content and the governing partial differential equations are coupled. The model setup is 2D and contains a hypothetic series of aquifers and barriers, each with a thickness of 200 m. Formation pressure is increased at depths of about 2000 m in proximity to a salt wall and a permeable fault. The domain size reaches up to tens of kilometers horizontally to the salt wall. The fault connects the injection formation and the freshwater aquifer such that conditions can be considered as extremely favorable for induced brine migration (worst case scenarios). Brine, heat, and salt fluxes are quantified with reference to hydraulic permeabilities, storage capacities (in terms of domain size), initial salt and heat distribution, and operation pressures. The simulations reveal the development of a stagnation point in the fault region in each

  2. ISO 9000. Guidelines to increased costs and reduced product quality

    International Nuclear Information System (INIS)

    Reedy, R.F.

    1994-01-01

    Many US companies are considering being registered to the provisions of ISO 9000, International Standards for Quality Management. One important problem with the document is that ISO 9000 is not focused on control of product quality. The quality assurance rules established in ISO 9000 have been used in the US for more than 25 years with disastrous financial consequences and little, if any, improvement in quality and safety. These rules are so reliant on documentation and strict compliance that ensuring products comply with specifications has become a secondary issues. That is not what was intended, but it is the result. ISO 9000 program can work effectively only when the top executive responsible for engineering or production takes full responsibility for interpretation and implementation of the quality assurance program. 3 refs., 1 tab

  3. A gas production system from methane hydrate layers by hot water injection and BHP control with radial horizontal wells

    Energy Technology Data Exchange (ETDEWEB)

    Yamakawa, T.; Ono, S.; Iwamoto, A.; Sugai, Y.; Sasaki, K. [Kyushu Univ., Fukuoka, Fukuoka (Japan)

    2010-07-01

    Reservoir characterization of methane hydrate (MH) bearing turbidite channel in the eastern Nankai Trough, in Japan has been performed to develop a gas production strategy. This paper proposed a gas production system from methane hydrate (MH) sediment layers by combining the hot water injection method and bottom hole pressure control at the production well using radial horizontal wells. Numerical simulations of the cylindrical homogeneous MH layer model were performed in order to evaluate gas production characteristics by the depressurization method with bottom hole pressure control. In addition, the effects of numerical block modeling and averaging physical properties of MH layers were presented. According to numerical simulations, combining the existing production system with hot water injection and bottom hole pressure control results in an outward expansion of the hot water chamber from the center of the MH layer with continuous gas production. 10 refs., 15 figs.

  4. Chemical vapor deposition growth of boron-carbon-nitrogen layers from methylamine borane thermolysis products

    Science.gov (United States)

    Leardini, Fabrice; Flores, Eduardo; Galvis E, Andrés R.; Ferrer, Isabel J.; Ramón Ares, José; Sánchez, Carlos; Molina, Pablo; van der Meulen, Herko P.; Gómez Navarro, Cristina; López Polin, Guillermo; Urbanos, Fernando J.; Granados, Daniel; García-García, F. Javier; Demirci, Umit B.; Yot, Pascal G.; Mastrangelo, Filippo; Grazia Betti, Maria; Mariani, Carlo

    2018-01-01

    This work investigates the growth of B-C-N layers by chemical vapor deposition using methylamine borane (MeAB) as the single-source precursor. MeAB has been synthesized and characterized, paying particular attention to the analysis of its thermolysis products, which are the gaseous precursors for B-C-N growth. Samples have been grown on Cu foils and transferred onto different substrates for their morphological, structural, chemical, electronic and optical characterizations. The results of these characterizations indicate a segregation of h-BN and graphene-like (Gr) domains. However, there is an important presence of B and N interactions with C at the Gr borders, and of C interacting at the h-BN-edges, respectively, in the obtained nano-layers. In particular, there is a significant presence of C-N bonds, at Gr/h-BN borders and in the form of N doping of Gr domains. The overall B:C:N contents in the layers is close to 1:3:1.5. A careful analysis of the optical bandgap determination of the obtained B-C-N layers is presented, discussed and compared with previous seminal works with samples of similar composition.

  5. Increased Use of Productivity Management Can Help Control Government Costs.

    Science.gov (United States)

    1983-11-10

    estimated that 34 percent of agency spend- ing reductions made to balance the budget in fiscal year 1984 can be attributed to the productivity program. The...result in the services 5. [] use of employee incentives (9) of some employees no longer being required in the unit in which they 6. [) quality of worklife

  6. A simple technique to increase profits in wood products marketing

    Science.gov (United States)

    George B. Harpole

    1971-01-01

    Mathematical models can be used to solve quickly some simple day-to-day marketing problems. This note explains how a sawmill production manager, who has an essentially fixed-capacity mill, can solve several optimization problems by using pencil and paper, a forecast of market prices, and a simple algorithm. One such problem is to maximize profits in an operating period...

  7. livestock production systems for increased yield on resources

    African Journals Online (AJOL)

    ciples of business management to research and education programming is ... planning for livestock production research and education ... cultivated with the maximum potential of arable land being ... (3) Approximately 85/, of the land area receives ... trate feeds has had a great impact on the beef cattle in- ..... (45 days A.I.,.

  8. Increased gum arabic production after infestation of Acacia senegal ...

    African Journals Online (AJOL)

    The aim of this study was to investigate the correlation between the beetle Agrilus nubeculosus and gum arabic production by Acacia senegal. Some trees were tapped and left open to facilitate infestation by A. nubeculosus and others were covered with wire mesh as control. Gum yield, physical and chemical properties of ...

  9. Disrupting Faculty Service: Using Technology to Increase Academic Service Productivity

    Science.gov (United States)

    Burnett, Perry; Shemroske, Kenneth; Khayum, Mohammed

    2014-01-01

    Scholarly attention regarding faculty involvement has primarily focused on faculty opinions of shared governance and faculty influence on institutional decision-making. There has been limited attention given to academic service productivity and the effectiveness of traditional approaches toward the accomplishment of faculty service requirements.…

  10. Biomass production and potential water stress increase with ...

    African Journals Online (AJOL)

    The choice of planting density and tree genotype are basic decisions when establishing a forest stand. Understanding the interaction between planting density and genotype, and their relationship with biomass production and potential water stress, is crucial as forest managers are faced with a changing climate. However ...

  11. Crossbreeding to increase beef production: Additive and non ...

    African Journals Online (AJOL)

    Fitness is of paramount importance to efficient and profitable beef production. Thus, the objective of this study was to estimate genetic components of fitness traits measured in Afrikaner (A), Brahman (B), Charolais (C), Hereford (H) and Simmentaler (S). For this study, the fitness traits recorded were percentage of cows ...

  12. Belief in increased market share for ecological products

    International Nuclear Information System (INIS)

    Bjerk, Jan

    2003-01-01

    In September 2003, Matvarehuset Ultra in Stovner, a city quarter in Oslo, Norway, became the first supermarket of that capital to be awarded the ''Svanemerket'' (the Swan eco label), which is the official Nordic eco label, introduced by the Nordic Council of Ministers. The supermarket chain Ultra has since long been the biggest one in Norway with respect to ecological food. A supermarket that has been awarded the Swan eco label, meets the most stringent environmental demands in the world for grocery products. In addition to stocking a broad range of ecologically and environmentally labelled products such supermarkets must meet a series of requirements with respect to energy consumption, packaging and waste management and transport. At present, 4.5 per cent of the total assortment is either ecological, suited for allergic subjects or Swan eco labelled. The energy consumption of the supermarket in Stovner is 40 per cent lower than the average for supermarkets in Norway. Further details discussed in this article are ecological meat products, waste management and cleaning. They also stock products carrying the EU Eco-label ''Flower''

  13. Radiolysis products and sensory properties of electron-beam-irradiated high-barrier food-packaging films containing a buried layer of recycled low-density polyethylene.

    Science.gov (United States)

    Chytiri, S D; Badeka, A V; Riganakos, K A; Kontominas, M G

    2010-04-01

    The aim was to study the effect of electron-beam irradiation on the production of radiolysis products and sensory changes in experimental high-barrier packaging films composed of polyamide (PA), ethylene-vinyl alcohol (EVOH) and low-density polyethylene (LDPE). Films contained a middle buried layer of recycled LDPE, while films containing 100% virgin LDPE as the middle buried layer were taken as controls. Irradiation doses ranged between zero and 60 kGy. Generally, a large number of radiolysis products were produced during electron-beam irradiation, even at the lower absorbed doses of 5 and 10 kGy (approved doses for food 'cold pasteurization'). The quantity of radiolysis products increased with irradiation dose. There were no significant differences in radiolysis products identified between samples containing a recycled layer of LDPE and those containing virgin LDPE (all absorbed doses), indicating the 'functional barrier' properties of external virgin polymer layers. Sensory properties (mainly taste) of potable water were affected after contact with irradiated as low as 5 kGy packaging films. This effect increased with increasing irradiation dose.

  14. Volatile and non-volatile radiolysis products in irradiated multilayer coextruded food-packaging films containing a buried layer of recycled low-density polyethylene.

    Science.gov (United States)

    Chytiri, S; Goulas, A E; Badeka, A; Riganakos, K A; Kontominas, M G

    2005-12-01

    The effects of gamma-irradiation (5-60 kGy) on radiolysis products and sensory changes of experimental five-layer food-packaging films were determined. Films contained a middle buried layer of recycled low-density polyethylene (LDPE) comprising 25-50% by weight (bw) of the multilayer structure. Respective films containing 100% virgin LDPE as the buried layer were used as controls. Under realistic polymer/food simulant contact conditions during irradiation, a large number of primary and secondary radiolysis products (hydrocarbons, aldehydes, ketones, alcohols, carboxylic acids) were produced. These compounds were detected in the food simulant after contact with all films tested, even at the lower absorbed doses of 5 and 10 kGy (approved doses for food preservation). The type and concentration of radiolysis products increased progressively with increasing dose. Generally, there were no significant differences in radiolysis products between samples containing a buried layer of recycled LDPE and those containing virgin LDPE (all absorbed doses), indicating the good barrier properties of external virgin polymer layers. Volatile and non-volatile compounds produced during irradiation affected the sensory properties of potable water after contact with packaging films. Taste transfer to water was observed mainly at higher doses and was more noticeable for multilayer structures containing recycled LDPE, even though differences were slight.

  15. A Decade of Annual National Land Cover Products - the Cropland Data Layer

    Science.gov (United States)

    Mueller, R.; Johnson, D. M.; Sandborn, A.; Willis, P.; Ebinger, L.; Yang, Z.; Seffrin, R.; Boryan, C. G.; Hardin, R.

    2017-12-01

    The Cropland Data Layer (CDL) is a national land cover product produced by the US Department of Agriculture/National Agricultural Statistics Service (NASS) to assess planted crop acreage on an annual basis. The 2017 CDL product serves as the decadal anniversary for the mapping of conterminous US agriculture. The CDL is a supervised land cover classification derived from medium resolution Earth observing satellites that capture crop phenology throughout the growing season, leveraging confidentially held ground reference information from the USDA Farm Service Agency (FSA) as training data. The CDL currently uses ancillary geospatial data from the US Geological Survey's National Land Cover Database (NLCD), and Imperviousness and Forest Canopy layers as well as the National Elevation Dataset as training for the non-agricultural domain. Accuracy assessments are documented and released annually with metadata publication. NASS is currently reprocessing the 2008 and 2009 CDL products to 30m resolution. They were originally processed and released at 56m based on the Resourcesat-1 AWiFS sensor. Additionally, best practices learned from processing the FSA ground reference data were applied to the historical training set, providing an enhanced classification at 30m. The release of these reprocessed products in the fall of 2017, along with the 2017 CDL annual product will be discussed and will complete a decade's worth of annual 30m products. Discussions of change and trend analytics as well as partnerships with key industry stakeholders will be displayed on the evolution and improvements made to this decadal geospatial crop specific land cover product.

  16. Increase in hospital purchase of hand hygiene products: The importance of focusing on the right product.

    Science.gov (United States)

    Biswal, Manisha; Prasad, Amber; Dhaliwal, Navneet; Gupta, A K; Taneja, Neelam

    2015-07-01

    Alcohol-based handrub (AHR) consumption is positively correlated with increases in hand hygiene (HH) compliance. In our 2,000-bed hospital in India, multiple awareness drives have been conducted to promote HH. This study aimed to determine the quantitative effect of these campaigns on use of HH products (soap and AHR) in the hospital. Over the last 6 years, bar soap consumption has increased by 389.15%, whereas that of AHR increased by 146.7%. We also evaluated microbial contamination of 99 bar soap and 60 liquid soap samples in our hospital for a year. Of the samples, 61 (61.6%) of the bar soaps and 2 (3.3%) of the liquid soaps were found to be contaminated with various organisms (P liquid soaps instead of bar soaps for handwashing purposes. Copyright © 2015 Association for Professionals in Infection Control and Epidemiology, Inc. Published by Elsevier Inc. All rights reserved.

  17. Counterintuitive effect of fall mixed layer deepening on eukaryotic new production in the Sargasso Sea

    Science.gov (United States)

    Fawcett, S. E.; Lomas, M. W.; Ward, B. B.; Sigman, D. M.

    2012-12-01

    The Sargasso Sea is characterized by a short period of deep vertical mixing in the late winter and early spring, followed by strong thermal stratification during the summer. Stratification persists into the fall, impeding the upward flux of nitrate from depth so that recycled forms of nitrogen (N) such as ammonium are thought to support most primary production. We collected particles from surface waters during March, July, October, and December, used flow cytometry to separate the prokaryotic and eukaryotic phytoplankton, and analyzed their respective 15N/14N. In all months, the 15N/14N of the prokaryotic genera, Prochlorococcus and Synechococcus, was low, indicative of reliance on recycled N throughout the year. In July, the 15N/14N of eukaryotic phytoplankton was variable but consistently higher than that of the prokaryotes, reflecting eukaryotic consumption of subsurface nitrate. Two eukaryotic profiles from October and December were similar to those from July. In three other fall profiles, the eukaryotes had a 15N/14N similar to that of the prokaryotes, suggesting a switch toward greater reliance on recycled N. This change in the dominant N source supporting eukaryotic production appears to be driven by the density structure of the upper water column. The very shallow low-density surface "mixed layer" (≤20 m) that develops in early-to-mid summer does not contribute to stratification at the base of the euphotic zone, and subsurface nitrate can mix up into the lower euphotic zone, facilitating continued production. The deepening of the mixed layer into the fall, typically taken as an indication of weaker overall stratification, actually strengthens the isolation of the euphotic zone as a whole, reducing the upward supply of nitrate to the photosynthetically active layer. The same counterintuitive dynamic explains the latitudinal patterns in a set of three October depth profiles. Two northern stations (32°N and 27°N) were characterized by a thick, low

  18. Humus layer is the main locus of secondary SO4 production in boreal forests

    Science.gov (United States)

    Houle, Daniel; Marty, Charles; Duchesne, Louis; Gagnon, Christian

    2014-02-01

    Identifying the sources of S exported from catchments and the reactivity of the large soil organic S pool is crucial to understand the mid- or long-term response of forested catchments to decreasing atmospheric S deposition and global warming. Sulfur fluxes as well as S and O isotopes of SO4 were measured in precipitation, throughfall, soil solutions and streams at two boreal forest catchments respectively dominated by black spruce (BS) and balsam fir (BF) in Quebec, Canada. Overall, δ34S-SO4 signature showed relatively small variations among various solution types. However, at both sites, δ18O-SO4 in precipitation (averages of 10.5-11.1‰) was decreased by 3.5-3.6‰ in throughfall because of the production of secondary SO4 through oxidation of SO2 deposited on the canopy. Throughfall δ18O-SO4 was decreased by a further 5.4-6.6‰ in the solution leaving the humus layer which was attributed to the production of secondary SO4 under the action of soil microorganisms through the oxidation of organic S during which the S atom acquired O from water and gaseous O2 present in the soil. A mixing equation based on known isotopic signature of each source suggested that ˜67-81% of the S-SO4 leaving the catchments had interacted with the canopy and the humus layer. The stability of δ18O-SO4 in the mineral soil solution and in the stream of both sites, suggests that SO4 does not undergo reduction-oxidation cycles after its passage through the humus layer. Despite its huge size, the organic S reservoir within the mineral soil would be largely inert. Given the chemical nature of SO4 transformation in the canopy, the humus layer would be responsible for nearly 100% of the biological production of secondary SO4 in the whole watershed at both sites. Taking into account the substantial production of dissolved organic S in the humus layer further emphasizes the crucial importance of the latter in the S cycling of boreal forests.

  19. Astaxanthin increases progesterone production in cultured bovine luteal cells.

    Science.gov (United States)

    Kamada, Hachiro; Akagi, Satoshi; Watanabe, Shinya

    2017-06-29

    Although astaxanthin (AST) is known to be a strong antioxidant, its effects on reproductive function in domestic animals have not yet been elucidated in detail. Therefore, we investigated the effects of AST on luteal cells, which produce progesterone (P4), an important hormone for maintaining pregnancy. Luteal cells were prepared by collagenase dispersion of the corpus luteum (CL). The addition of racemic AST at a low concentration (production than RR-AST. When 1 mg/kg·body weight of SS-AST derived from green algae was fed to cows for 2 weeks, its concentration in blood plasma was 10.9 nM on average, which was sufficient to expect an in vitro effect on the production of P4 in cows. These results suggested the potential of SS-AST supplements for cows to elevate luteal function.

  20. Viewing Death on Television Increases the Appeal of Advertised Products

    Science.gov (United States)

    DAR-NIMROD, ILAN

    2012-01-01

    References to death abound in many television programs accessible to most people. Terror Management Theory (TMT) postulates that existential anxiety, which death reminders activate, may reinforce materialistic tendencies. The current paper explores the effect of a death reminder in television shows on the desirability of advertised products. Consistent with TMT's predictions, in two studies participants show greater desire for products, which were advertised immediately following clips from programs that featured a death scene, compared with programs that did not. Cognitive accessibility of death predicted the appeal difference while changes in affect or interest in the show did not. The findings are discussed in light on affective and existential theories which make opposite predictions. Implications and future directions are considered. PMID:22468421

  1. Viewing death on television increases the appeal of advertised products.

    Science.gov (United States)

    Dar-Nimrod, Ilan

    2012-01-01

    References to death abound in many television programs accessible to most people. Terror Management Theory postulates that existential anxiety, which death reminders activate, may reinforce materialistic tendencies. The current article explores the effect of a death reminder in television shows on the desirability of advertised products. Consistent with Terror Management Theory's predictions, in two studies participants show greater desire for products, which were advertised immediately following clips from programs that featured a death scene, compared with programs that did not. Cognitive accessibility of death predicted the appeal difference while changes in affect or interest in the show did not. The findings are discussed in light on affective and existential theories which make opposite predictions. Implications and future directions are considered.

  2. SCK-CEN increases production of medical isotopes by half

    International Nuclear Information System (INIS)

    Ponsard, B.; Leysen, P.; Janssens, J.

    2010-01-01

    It is impossible to imagine the medical world today without radioisotopes, and due to rapid technological progress in nuclear medicine their use is still on the rise. An important role of research reactors is the production of molybdenum-99. Around the world this is done primarily by five nuclear research reactors, one of which is the BR2 reactor of SCK-CEN. As a result of checks and maintenance work on three other reactors, for a few years there has been a serious crisis in the availability of this medical isotope. In order to guarantee the worldwide supply of radioisotopes, SCK-CEN expanded its production of molybdenum-99 by 50 percent in 2010.

  3. Improvement of Stand Jig Sealer and Its Increased Production Capacity

    Science.gov (United States)

    Soebandrija, K. E. N.; Astuti, S. W. D.

    2014-03-01

    This paper has the objective to prove that improvement of Stand Jig Sealer can lead to the cycle time target as part of Improvement efforts and its Productivity. Prior researches through prior journals both classics journal such as Quesnay (1766) and Solow (1957) and updated journal such as Reikard (2011) researches, are mentioned and elaborated. Precisely, the research is narrowed down and specified into automotive industry and eventually the software related of SPSS and Structural Equation Modeling ( SEM ). The analysis and its method are conducted through the calculation working time. The mentioned calculation are reinforced with the hypothesis test using SPSS Version 19 and involve parameters of production efficiency, productivity calculation, and the calculation of financial investments. The results obtained are augmented achievement of cycle time target ≤ 80 seconds posterior to improvement stand jig sealer. The result from calculation of SPSS-19 version comprise the following aspects: the one-sided hypothesis test is rejection of Ho:μ≥80 seconds, the correlation rs=0.84, regression y = 0.159+0.642x, validity R table = 0.4438, reliability value of Cronbach's alpha = 0.885>0.70, independence (Chi Square) Asymp. Sig=0.028financial analysis (NPV 2,340,596>0, PI 2.04>1, IRR 45.56%>i=12.68%, PP=1.86). The Mentioned calculation results support the hypothesis and ultimately align with the objective of this paper to prove that improvement of Stand Jig Sealer and its relation toward the cycle time target. Precisely, the improvement of production capacity of PT. Astra Daihatsu Motor.

  4. Preliminary Results for Ways to Increase Meat Production in Cattle

    OpenAIRE

    Doina Popa; Dorina Cotarlea; Doina Sprinjean

    2010-01-01

    In order to improve the quality and quantity of meat production in cattle in the ICDM Cristian institute and two private farms, Beef Technology and Artificial Insemination was applied. Artificial Insemination was performed with semen from bulls of meat breeds (Charolaise, Bleu Belge, Aberdeen Angus). The average daily gains obtained were between 0.40-1.30 kg / head / day, varying based on race, sex, technology applied, etc.

  5. Preliminary Results for Ways to Increase Meat Production in Cattle

    Directory of Open Access Journals (Sweden)

    Doina Popa

    2010-10-01

    Full Text Available In order to improve the quality and quantity of meat production in cattle in the ICDM Cristian institute and two private farms, Beef Technology and Artificial Insemination was applied. Artificial Insemination was performed with semen from bulls of meat breeds (Charolaise, Bleu Belge, Aberdeen Angus. The average daily gains obtained were between 0.40-1.30 kg / head / day, varying based on race, sex, technology applied, etc.

  6. Increasing Cropping System Diversity Balances Productivity, Profitability and Environmental Health

    Science.gov (United States)

    Davis, Adam S.; Hill, Jason D.; Chase, Craig A.; Johanns, Ann M.; Liebman, Matt

    2012-01-01

    Balancing productivity, profitability, and environmental health is a key challenge for agricultural sustainability. Most crop production systems in the United States are characterized by low species and management diversity, high use of fossil energy and agrichemicals, and large negative impacts on the environment. We hypothesized that cropping system diversification would promote ecosystem services that would supplement, and eventually displace, synthetic external inputs used to maintain crop productivity. To test this, we conducted a field study from 2003–2011 in Iowa that included three contrasting systems varying in length of crop sequence and inputs. We compared a conventionally managed 2-yr rotation (maize-soybean) that received fertilizers and herbicides at rates comparable to those used on nearby farms with two more diverse cropping systems: a 3-yr rotation (maize-soybean-small grain + red clover) and a 4-yr rotation (maize-soybean-small grain + alfalfa-alfalfa) managed with lower synthetic N fertilizer and herbicide inputs and periodic applications of cattle manure. Grain yields, mass of harvested products, and profit in the more diverse systems were similar to, or greater than, those in the conventional system, despite reductions of agrichemical inputs. Weeds were suppressed effectively in all systems, but freshwater toxicity of the more diverse systems was two orders of magnitude lower than in the conventional system. Results of our study indicate that more diverse cropping systems can use small amounts of synthetic agrichemical inputs as powerful tools with which to tune, rather than drive, agroecosystem performance, while meeting or exceeding the performance of less diverse systems. PMID:23071739

  7. Physiological hypercortisolemia increases proteolysis, glutamine, and alanine production

    International Nuclear Information System (INIS)

    Darmaun, D.; Matthews, D.E.; Bier, D.M.

    1988-01-01

    Physiological elevations of plasma cortisol levels, as are encountered in stress and severe trauma, were produced in six normal subjects by infusing them with hydrocortisone for 64 h. Amino acid kinetics were measured in the postabsorptive state using three 4-h infusions of L-[1- 13 C]leucine, L-phenyl[ 2 H 5 ]phenylalanine, L-[2- 15 N]glutamine, and L-[1- 13 C]alanine tracers (1) before, (2) at 12 h, and (3) at 60 h of cortisol infusion. Before and throughout the study, the subjects ate a normal diet of adequate protein and energy intake. The cortisol infusion raised plasma cortisol levels significantly from 10 ± 1 to 32 ± 4 μg/dl, leucine flux from 83 ± 3 to 97 ± 3 μmol·kg -1 ·h -1 , and phenylalanine flux from 34 ± 1 to 39 ± 1 (SE) μmol·kg -1 ·h -1 after 12 h of cortisol infusion. These increases were maintained until the cortisol infusion was terminated. These nearly identical 15% increases in two different essential amino acid appearance rates are reflective of increased whole body protein breakdown. Glutamine flux rose by 12 h of cortisol infusion and remained elevated at the same level at 64 h. The increase in flux was primarily due to a 55% increase in glutamine de novo synthesis. Alanine flux increased with acute hypercortisolemia and increased further at 60 h of cortisol infusion, a result primarily of increased alanine de novo synthesis. Insulin, alanine, and lactate plasma levels responded similarly with significant rises between the acute and chronic periods of cortisol infusion. Thus hypercortisolemia increases both protein breakdown and the turnover of important nonessential amino acids for periods of up to 64 h

  8. 26Al production in explosive burning of hydrogen-helium layers

    International Nuclear Information System (INIS)

    Arnould, M.; Hillebrand, W.; Thielemann, F.K.

    1978-08-01

    There is now strong evidence for the presence of live 26 Al (t 1 / 2 approximately 7.2 x 10 5 y) in the early solar system just before the beginning of its condensation phase. It is shown that the passage of a supernova shock wave through the outer part of the helium zone of a massive star can lead to significant 26 Al production if some protons are present in such external layers. In fact, a ratio 26 Al/ 27 Al approximately is derived for a proton mass fraction of the order of 5x10 -3 to 5x10 -2 . The required protons may survive from a preshock incomplete hydrogen burning or may result from some mixing with outer hydrogen-rich layers. (orig.) [de

  9. Deferral of leaf senescence and increased productivity in rice

    International Nuclear Information System (INIS)

    Biswas, A.K.; Choudhari, M.A.

    1978-01-01

    The effect of spraying of different hormones and nurtient solutions on plants at 3 developmental stages of growth of Jaya rice has been studied. Increased plant growth and leaf longevity have been correlated with increased yield of the crop. 32 P feeding experiments showed that major export of materials took place from flag leaf to grains, while various treatments with hormones and nutrients could modify this export by implicating other leaves as well. These data also support the increased yield and longevity of the top. (author)

  10. The impact of a grain of sand: increasing production speed in flexible risers generates significant savings in gas production

    NARCIS (Netherlands)

    Bokhorst, E. van; Blokland, H.

    2012-01-01

    Deep-sea oil and gas production normally involves the use of flexible risers that comprise a metal carcass with a large number of enveloping layers that safeguard the integrity of the pipe system. The flexible risers are hung from a floating platform and may be supported by several floating buoys to

  11. Using JPSS Retrievals to Implement a Multisensor, Synoptic, Layered Water Vapor Product for Forecasters

    Science.gov (United States)

    Forsythe, J. M.; Jones, A. S.; Kidder, S. Q.; Fuell, K.; LeRoy, A.; Bikos, D.; Szoke, E.

    2015-12-01

    Forecasters have been using the NOAA operational blended total precipitable water (TPW) product, developed by the Cooperative Institute for Research in the Atmosphere (CIRA), since 2009. Blended TPW has a wide variety of uses related to heavy precipitation and flooding, such as measuring the amount of moisture in an atmospheric river originating in the tropics. But blended TPW conveys no information on the vertical distribution of moisture, which is relevant to a variety of forecast concerns. Vertical profile information is particularly lacking over the oceans for landfalling storms. A blended six-satellite, four-layer, layered water vapor product demonstrated by CIRA and the NASA Short-term Prediction Research and Transition Center (SPoRT) in allows forecasters to see the vertical distribution of water vapor in near real-time. National Weather Service (NWS) forecaster feedback indicated that this new, vertically-resolved view of water vapor has a substantial impact on forecasts. This product uses NOAA investments in polar orbiting satellite sounding retrievals from passive microwave radiances, in particular, the Microwave Integrated Retrieval System (MIRS). The product currently utilizes data from the NOAA-18 and -19 spacecraft, Metop-A and -B, and the Defense Meteorological Program (DMSP) F18 spacecraft. The sounding instruments onboard the Suomi-NPP and JPSS spacecraft will be cornerstone instruments in the future evolution of this product. Applications of the product to heavy rain cases will be presented and compared to commonly used data such as radiosondes and Geostationary Operational Environmental Satellite (GOES) water vapor channel imagery. Research is currently beginning to implement advective blending, where model winds are used to move the water vapor profiles to a common time. Interactions with the NOAA Satellite Analysis Branch (SAB), National Center for Environmental Prediction (NCEP) centers including the Ocean Prediction Center (OPC) and Weather

  12. Golbal Economic and Environmental Impacts of Increased Bioenergy Production

    Energy Technology Data Exchange (ETDEWEB)

    Wallace Tyner

    2012-05-30

    The project had three main objectives: to build and incorporate an explicit biomass energy sector within the GTAP analytical framework and data base; to provide an analysis of the impact of renewable fuel standards and other policies in the U.S. and E.U, as well as alternative biofuel policies in other parts of the world, on changes in production, prices, consumption, trade and poverty; and to evaluate environmental impacts of alternative policies for bioenergy development. Progress and outputs related to each objective are reported.

  13. Production of metal fullerene surface layer from various media in the process of steel carbonization

    Directory of Open Access Journals (Sweden)

    KUZEEV Iskander Rustemovich

    2018-04-01

    Full Text Available Studies devoted to production of metal fullerene layer in steels when introducing carbon from organic and inorganic media were performed. Barium carbonate was used as an inorganic medium and petroleum pitch was used as an organic medium. In order to generate the required amount of fullerenes in the process of steel samples carbonization, optimal temperature mode was found. The higher temperature, absorption and cohesive effects become less important and polymeric carbon structures destruction processes become more important. On the bottom the temperature is limited by petroleum pitch softening temperature and its transition to low-viscous state in order to enhance molecular mobility and improve the possibility of their diffusion to metal surface. Identification of fullerenes in the surface modified layer was carried out following the methods of IR-Fourier spectrometry and high-performance liquid chromatography. It was found out that nanocarbon structures, formed during carbonization in barium carbonate and petroleum pitch mediums, possess different morphology. In the process of metal carbonization from carbonates medium, the main role in fullerenes synthesis is belonged to catalytic effect of surface with generation of endohedral derivatives in the surface layer; but in the process of carbonization from pitch medium fullerenes are formed during crystallization of the latter and crystallization centers are of fullerene type. Based on theoretical data and dataof spectral and chromatographic analysis, optimal conditions of metal fullerene layer formation in barium carbonate and petroleum pitch mediums were determined. Low cohesion of layer, modified in barium carbonate medium, with metal basis was discovered. That was caused by limited carbon diffusion in the volume of α-Fe. According to the detected mechanism of fullerenes formation on steel surface in gaseous medium, fullerenes are formed on catalytic centers – ferrum atoms, forming thin metal

  14. Increased luminance of MEH-PPV and PFO based PLEDs by using salmon DNA as an electron blocking layer

    International Nuclear Information System (INIS)

    Madhwal, Devinder; Rait, S.S.; Verma, A.; Kumar, Amit; Bhatnagar, P.K.; Mathur, P.C.; Onoda, M.

    2010-01-01

    The effect of salmon DNA-CTMA as an electron blocking layer (EBL) has been examined on the performance of MEH-PPV and PFO-based light emitting diodes. Though the turn-on voltage increases with incorporation of EBL, a significant increase in luminance and luminous efficiency for both the devices is observed. The EBL improves the device performance by blocking electrons at the EBL-polymer interface, thereby increasing the recombination probability of electrons and holes. The luminance of the MEH-PPV based Bio-LED increases to 100 cd/m 2 from 30 cd/m 2 while a corresponding increase for the PFO based LED is to 160 cd/m 2 from 80 cd/m 2 with and without EBL, respectively.

  15. Bucket Brigades to Increase Productivity in a Luxury Assembly Line

    Directory of Open Access Journals (Sweden)

    Filippo De Carlo

    2013-08-01

    Full Text Available One of the most challenging issues in manual assembly lines is to achieve the best balance of workloads. There are many analytic approaches to solve this problem, but they are often neglected, since they are time-consuming and require high level engineering skills. Fashion bags packaging lines must comply with a number of different products with low production volumes, while the organization of the line is often under the mere responsibility of the foreman, who balances workloads in an empirical way. The aim of this work is to evaluate the effectiveness of the arrangement of bucket brigades (BBs for an assembly line of luxury handbags. To do this, it was decided to perform a testing activity in a company producing fashion handbags in order to compare the self-made design with the BBs and with a simple assembly line balancing problem algorithm. The originality of this research lies in the fact that there are no studies in the literature on BBs applied to the packaging of highly variable small batches. The results were excellent, showing the advantages of BBs in terms of flexibility, the reduction of work in the process and the ability to handle small anomalies.

  16. Energy accumulating substances for increase of replacement factor of petroleum from layer on Kumkol deposit

    International Nuclear Information System (INIS)

    Yunusov, U.I.; Ospanov, E.S.; Nurabaev, B.K.; Ajshuakov, K.A.; Tursunkulov, Eh.T.

    1997-01-01

    Laboratory researches with using of alloys of energy accumulating substances are carried out with the purpose of petroleum output increase on Kumkol deposit. Factor of petroleum replacement within range from 79.5 to 82.0 % is received by use silico-barium, silico-calcium and ferro-silicium with alkali and aluminium. (author)

  17. Effect of adding Te to layered GaSe crystals to increase the van der Waals bonding force

    Science.gov (United States)

    Tanabe, Tadao; Zhao, Shu; Sato, Yohei; Oyama, Yutaka

    2017-10-01

    The interplanar binding strength of layered GaSe1-xTex crystals was directly measured using a tensile testing machine. The GaSe1-xTex crystals were grown by a low temperature liquid phase solution method under a controlled Se vapor pressure. The stoichiometry-controlled GaSe1-xTex crystal has the ɛ-polytype structure of GaSe, where the Te atoms are substituted for some of the Se atoms in the GaSe crystal. The effect of adding Te on the bonding strength between the GaSe layers was determined from direct measurements of the van der Waals bonding energy. The bonding energy was increased from 0.023 × 106 N/m2 for GaSe to 0.16 × 106 N/m2 for GaSe1-xTex (x = 0.106).

  18. Preparation of silica stabilized biological templates for the production of metal and layered nanoparticles

    Science.gov (United States)

    Culver, James N; Royston, Elizabeth; Brown, Adam; Harris, Michael

    2013-02-26

    The present invention relates to a system and method providing for increased silica growth on a bio-template, wherein the bio-template is pretreated with aniline to produce a uniform silica attractive surface and yielding a significant silica layers of at least 10 nm, and more preferably at least 20 nm in thickness, thereby providing for a high degree of stability to the bio-template.

  19. Writing Retreat Increases Productivity And Community For Women Geoscientists

    Science.gov (United States)

    O'Connell, S.; Holmes, M.

    2011-12-01

    Five, weeklong geoscientist writing retreats have been completed with an NSF ADANCE PAID grant. During the five nights and four and a half days, eight to twenty-four academics have gathered in a rural setting outside of Boston to get to focus on writing papers and proposals while getting to know each other. Participants range in age and experience from graduate students to emeritus professors. Over twenty papers and proposals acknowledge their production, in part to this writing retreat. Impact extends beyond papers as informal mentoring and discussions at meals and in the evenings centers on succeeding in academia. Research and teaching are foremost in the conversation. Post-docs learn strategies for applying for jobs and grants, and senior professors discuss strategies for working with academic administrations, running departments and mentoring students. They also learn new technologies and perspectives from younger participants. Particularly helpful are discussions on work-life balance. Networking opportunities extend beyond the retreat as participants join each other at their home institutions to give seminars, develop research projects and mentor each other's students. All weeks follow the same format. Participants arrive Sunday and meet during an evening welcome reception. Monday is devoted to writing. Tuesday a writing coach is available. In the morning, using examples from the scientific literature, she discusses strategies and techniques for writing clearly at a group session. During the afternoon, participants work with the coach individually or in small groups to improve their own writing projects. Wednesday evening a skill session is offered on a topic of interest. These have included undergraduate research, NSF funding, productive techniques for dealing with conflict, and generational characteristics and attitudes, which can hamper communication. A Thursday evening wrap-up session prepares participants for Friday's departure. We believe that this model

  20. Increased gum arabic production after infestation of Acacia senegal ...

    African Journals Online (AJOL)

    Jane

    2011-07-20

    Jul 20, 2011 ... chemical properties of gum were determined for infested and control trees. A. senegal infested by A. ... also in the textile, pottery, lithography, cosmetics and ... Deforestation within the gum belt has lead to an increase in desert .... Atomic Absorption = V*N EDTA*1000/Volume of extract (mg/l). Where, V is the ...

  1. Increase of atmospheric CO2 promotes phytoplankton productivity

    NARCIS (Netherlands)

    Schippers, P.; Lürling, M.F.L.L.W.; Scheffer, M.

    2004-01-01

    It is usually thought that unlike terrestrial plants, phytoplankton will not show a significant response to an increase of atmospheric CO2. Here we suggest that this view may be biased by a neglect of the effects of carbon (C) assimilation on the pH and the dissociation of the C species. We show

  2. Rapid increases in tropospheric ozone production and export from China

    NARCIS (Netherlands)

    Verstraeten, W.W.; Neu, J.L.; Williams, J.E.; Bowman, K.W.; Worden, J.R.; Boersma, K.F.

    2015-01-01

    Rapid population growth and industrialization have driven substantial increases in Asian ozone precursor emissions over the past decade1, with highly uncertain impacts on regional and global tropospheric ozone levels. According to ozonesonde measurements2, 3, tropospheric ozone concentrations at two

  3. Increased accuracy of cost-estimation using product configuration systems

    DEFF Research Database (Denmark)

    Rasmussen, Jeppe Bredahl; Hvam, Lars; Mortensen, Niels Henrik

    This article describes an approach for utilizing Product Configuration Systems (PCS) for quantifying project costs in project-based companies. It presents a case study demonstrating a method of quantifying costs in a way that makes it possible to configure cost- and time estimates. Piecework costs......, material costs and sub-supplier costs are used as principle cost elements and linked to structural and process elements to facilitate configuration. The cost data are used by the PCS to generate fast and accurate cost-estimates, quotations, time estimates and cost summaries. The described cost...... quantification principles have been used in a Scandinavian SME (Small and Medium-sized Enterprise) since the 90’s, but have since 2011 been adopted to be used in a configuration system. A longitudinal case study was conducted to compare cost and time-estimation accuracy before and after implementation. We...

  4. Poloidally asymmetric potential increases in tokamak scrape-off layer plasmas by radiofrequency power

    International Nuclear Information System (INIS)

    Diebold, D.A.; Majeski, R.; Tanaka, T.

    1992-01-01

    Langmuir probe data are presented which show poloidally asymmetric increases in floating potential, electron temperature and, hence, plasma potential on magnetic field lines which map to the Faraday shield of an ICRF antenna in a medium size tokamak, Phaedrus-T, during radiofrequency power injection. These data are consistent with and suggestive of the existence of radiofrequency generated sheath voltages on those field lines. (author). Letter-to-the-editor. 20 refs, 3 figs

  5. Increased root production in soybeans grown under space flight conditions.

    Science.gov (United States)

    Levine, H. G.; Piastuch, W. C.

    The GENEX ({Gen}e {Ex}pression) spaceflight experiment (flown on STS-87) was developed to investigate whether direct and/or indirect effects of microgravity are perceived as an external stimulus for soybean seedling response. Protocols were designed to optimize root and shoot formation, gas exchange and moisture uniformity. Six surface sterilized soybean seeds (Glycine max cv McCall) were inserted into each of 32 autoclaved plastic seed growth pouches containing an inner germination paper sleeve (for a total of 192 seeds). The pouches were stowed within a mid-deck locker until Mission Flight Day 10, at which time an astronaut added water to each pouch (thereby initiating the process of seed germination on-orbit), and subsequently transferred them to four passive, light-tight aluminum canisters called BRIC-60s (Biological Research In Canisters). We report here on the morphological characteristics of: (1) the recovered flight material, (2) the corresponding ground control population, plus (3) additional controls grown on the ground under clinostat conditions. No significant growth differences were found between the flight, ground control and clinorotated treatments for either the cotyledons or hypocotyls. There were, however, significantly longer primary roots produced in the flight population relative to the ground control population, which in turn had significantly longer primary roots than the clinorotated population. This same pattern was observed relative to the production of lateral roots (flight > control > clinorotated). Taken together with previous literature reports, we believe that there is now sufficient evidence to conclude that plants grown under conditions of microgravity will generally exhibit enhanced root production relative to their ground control counterparts. The mechanism underlying this phenomenon is open to speculation. Funded under NASA Contract NAS10-12180.

  6. Increasing productivity by improved arc and beam welding technologies

    International Nuclear Information System (INIS)

    Dilthey, Ulrich; Stein, Lars

    2005-01-01

    In the early sixties, GMA welding methods were introduced into industrial manufacturing and they have been consequently developed further ever since. Recent advances do not only refer to power-source technology but also improved wire feed systems and new consumables such as filler materials and shielding gases. Great efforts have been made to increase deposition rates, and with this efficiency and welding speeds, by extending the frontiers of known processes and by developing new ones

  7. Entropy Production of Emerging Turbulent Scales in a Temporal Supercritical N-Neptane/Nitrogen Three-Dimensional Mixing Layer

    Science.gov (United States)

    Bellan, J.; Okongo, N.

    2000-01-01

    A study of emerging turbulent scales entropy production is conducted for a supercritical shear layer as a precursor to the eventual modeling of Subgrid Scales (from a turbulent state) leading to Large Eddy Simulations.

  8. Mutant E. coli strain with increased succinic acid production

    Science.gov (United States)

    Donnelly, Mark; Millard, Cynthia S.; Stols, Lucy

    2001-09-25

    A method for isolating succinic acid producing bacteria is provided comprising increasing the biomass of an organism which lacks the ability to catabolize pyruvate, and then subjecting the biomass to glucose-rich medium in an anaerobic environment to enable pyruvate-catabolizing mutants to grow. The invention also provides for a mutant that produces high amounts of succinic acid, which has been derived from a parent which lacked the genes for pyruvate formate lyase and lactate dehydrogenase, and which belongs to the E.coli Group of Bacteria.

  9. Mutant E. coli strain with increased succinic acid production

    Science.gov (United States)

    Donnelly, Mark; Millard, Cynthia S.; Stols, Lucy

    1998-01-01

    A method for isolating succinic acid producing bacteria is provided comprising increasing the biomass of an organism which lacks the ability to catabolize pyruvate, and then subjecting the biomass to glucose-rich medium in an anaerobic environment to enable pyruvate-catabolizing mutants to grow. The invention also provides for a mutant that produces high amounts of succinic acid, which as been derived from a parent which lacked the genes for pyruvate formate lyase and lactate dehydrogenase, and which belongs to the E.coli Group of Bacteria.

  10. Irradiated sewage sludge for increased crop production - III. Macronutrient availability

    International Nuclear Information System (INIS)

    El-Motaium, R.; Badawy, S.H.

    2002-01-01

    Irradiated and non-irradiated sewage sludge, from El-Gabal El-Asfar Farm near Cairo, were applied to tomato (Lycopersicon esculentum cv. GS) grown in a calcareous and a sandy soil at rates of 20, 40, 60, and 80 t/ha. Unfertilized controls and basal-fertilizer treatments were included. Total concentrations of micronutrients (Cu, Zn, Fe, Mn) in sludge-treated calcareous soil were higher than those in the sandy soil, although DTPA-extractable micronutrient concentrations were lower. There were no significant differences between irradiated and non-irradiated sludge treatments in DTPA-extractable and total micronutrient concentrations for the calcareous or the sandy soil. The total micronutrient concentrations for the highest sludge application rate (80 t/ha) were 5,108, 125, 68.2, and 207 μg/g in the calcareous soil and 2,200, 74.8, 43.2, and 139 μg/g in the sandy soil for Fe, Mn, Cu, and Zn, respectively, whereas the DTPA-extractable micronutrient concentrations were 25.0, 6.2, 5.5 and 6.6 μg/g in the calcareous soil and 53.3, 10.1, 7.3 and 9.83 μg/g in the sandy soil, respectively. Highly significant differences were observed in total and available micronutrient concentrations in calcareous and sandy soils among the sludge-application rates. Micronutrient concentrations of tomato leaves and fruits increased with increasing application rates of irradiated and non-irradiated sludge, and were higher in the sandy than in the calcareous soil for the same treatment. Highly significant differences were observed among the sludge-application rates in terms of the concentrations of micronutrients in both leaves and fruits. However, there were no significant differences between the irradiated and non-irradiated sludge treatments in the micronutrient concentrations of leaves and fruits in either soil. Micronutrient uptake increased with increasing rates of application of sludge to the soil, more so in the sandy than in the calcareous soil. The amounts of Fe, Mn, Cu, and Zn

  11. Irradiated sewage sludge for increased crop production - III. Macronutrient availability

    International Nuclear Information System (INIS)

    El-Motaium, R.; Badawy, S.H.

    2002-01-01

    Irradiated and non-irradiated sewage sludge, from El-Gabal El-Asfar Farm near Cairo, were applied to tomato (Lycopersicon esculentum cv. GS) grown in a calcareous and a sandy soil at rates of 20, 40, 60, and 80 t/ha. Unfertilized controls and basal-fertilizer treatments were included. Total concentrations of micronutrients (Cu, Zn, Fe, Mn) in sludge-treated calcareous soil were higher than those in the sandy soil, although DTPAextractable micronutrient concentrations were lower. There were no significant differences between irradiated and non-irradiated sludge treatments in DTPA-extractable and total micronutrient concentrations for the calcareous or the sandy soil. The total micronutrient concentrations for the highest sludge application rate (80 t/ha) were 5,108, 125, 68.2, and 207 μg/g in the calcareous soil and 2,200, 74.8, 43.2, and 139 μg/g in the sandy soil for Fe, Mn, Cu, and Zn, respectively, whereas the DTPA-extractable micronutrient concentrations were 25.0, 6.2, 5.5 and 6.6 μg/g in the calcareous soil and 53.3, 10.1, 7.3 and 9.83 μg/g in the sandy soil, respectively. Highly significant differences were observed in total and available micronutrient concentrations in calcareous and sandy soils among the sludge-application rates. Micronutrient concentrations of tomato leaves and fruits increased with increasing application rates of irradiated and non-irradiated sludge, and were higher in the sandy than in the calcareous soil for the same treatment. Highly significant differences were observed among the sludge-application rates in terms of the concentrations of micronutrients in both leaves and fruits. However, there were no significant differences between the irradiated and non-irradiated sludge treatments in the micronutrient concentrations of leaves and fruits in either soil. Micronutrient uptake increased with increasing rates of application of sludge to the soil, more so in the sandy than in the calcareous soil. The amounts of Fe, Mn, Cu, and Zn

  12. Decreased Blastocyst Production in Mice Exposed to Increased Rack Noise

    Science.gov (United States)

    Zamora, Bernadette M; Jiang, Meisheng; Wang, Ying; Chai, Minghua; Lawson, P Timothy; Lawson, Gregory W

    2009-01-01

    This study was conducted to investigate the possible effect of rack type on the blastocyst yield of mouse embryo donors. The first phase of the study consisted of housing some mice (group A) in a ventilated rack and others (group B) in a static rack in the same room for 3 d, followed by euthanasia for blastocyst collection and corticosterone assay. Parametric tests were used to compare groups. The number of blastocysts per donor was lower in group A (5.0 ± 1.4 blastocysts) than group B (13.1 ± 3.7 blastocysts). Mean noise was higher in the ventilated rack (80.4 dBC) than in the static rack (69.2 dBC). Serum corticosterone concentrations did not differ between groups. For the second phase of the study, a third group of mice (group C) was housed in a static rack without a ventilated rack in the same room. The noise level for group C was even lower (45.18 ± 2.91 dBC), and the blastocyst count per donor (16.4 ± 2.4) was higher than that of group B. The mean noise levels of empty ventilated and static racks differed significantly between groups for 10 different sound frequencies. Plotting mean blastocyst production against mean rack noise revealed a negative linear relationship with good strength of correlation. These results support the earlier observation that decreased blastocyst count occurs following housing of bred C57BL/6 donor mice in ventilated cages. PMID:19807968

  13. Production of High-quality Few-layer Graphene Flakes by Intercalation and Exfoliation

    KAUST Repository

    Alzahrani, Areej A.

    2017-11-30

    Graphene, a two-dimensional nanomaterial, has been given much attention since it was first isolated in 2004. Driving this intensive research effort are the unique properties of this one atom thick sheet of carbon, in particular its electrical, thermal and mechanical properties. While the technological applications proposed for graphene abound, its low-cost production in large scales is still a matter of interrogation. Simple methods to obtain few-layered graphene flakes of high structural quality are being investigated with the exfoliation of graphite taking a prominent place in this arena. From the many suggested approaches, the most promising involve the use of liquid media assisted by intercalants and shear forces acting on the basal layers of graphite. In this thesis, it is discussed how a novel method was developed to produce flakes with consistent lateral dimensions that are also few-layered and retain the expected structural and chemical characteristics of graphene. Here, the source material was a commercially available graphiteintercalated compound, also known as expandable graphite. Several exfoliation-inducing tools were investigated including the use of blenders, homogenizers, and ultrasonic processors. To aid in this process, various solvents and intercalants were explored under different reactive conditions. The more efficient approach in yielding defect-free thin flakes was the use of thermally expanded graphite in boiling dimethylformamide followed by ultrasonic processing and centrifugation. In parallel, a method to fraction the flakes as a function of their lateral size was developed. Ultimately, it was possible to obtain samples of graphene flakes with a lateral dimension of a few micrometers (<5 μm) and thickness of 1-3 nm (i.e. <10 layers).

  14. Increased office productivity through improved indoor air quality

    DEFF Research Database (Denmark)

    Fanger, Povl Ole

    2002-01-01

    Control of indoor pollution sources and ventilation are both means of improving indoor air quality. Three independent experiments have recently documented that removing a pollution source or increasing the ventilation rate will improve perceived air quality, reduce the intensity of several Sick...... with the air quality was reduced by either measure. The quantitative relationsh8ip was 1.1% change in performance per 10% dissatisfied, in the range 25-70% dissatisifed, or 0.5% change in performance per 1 decipol (dp), in the range 2-13 dp. Significant improvements in performance occurred only when......, future developments in HVCAC technology may include "personalized air ", new ways of improving the quality of supply air (e.g., by filtration), more extensive use of heat recovery from exhaust air and systematic selection of low-polluting building and furnishing materials....

  15. On the increasing of adhesive strength of nanotube layers on beta titanium alloys for medical applications

    Energy Technology Data Exchange (ETDEWEB)

    Fojt, Jaroslav, E-mail: fojtj@vscht.cz; Filip, Vladimir; Joska, Ludek

    2015-11-15

    Graphical abstract: - Highlights: • The nanostructured surface on Ti–36Nb–6Ta alloy was prepared by anodic oxidation. • The nanotubes properties were modified by electrochemical process parameters. • The composition and mechanical properties of the anodized surface were investigated. • The adhesive strength of the nanostructures was over 30 MPa. - Abstract: The nanostructuring of titanium and its alloys surfaces is used inter alia for increasing the medical implants osseointegration. Many papers about this topic were published. However, in most cases there were no informations about nanostructures adhesion to the surface, which is crucial from the application point of view. The aim of this study was to prepare nanostructures on titanium beta alloy and optimized its adhesion to the alloy surface. Nanotubes were formed by anodic polarization in electrolyte containing fluoride ions. The composition of the nanotubes was described by X-ray photoelectron spectroscopy. Nanostructures adhesion was tested by pull-of method. The nanotubes on the Ti–36Nb–6Ta beta alloy surface were prepared by anodization. The nanostructures properties were modified by electrochemical process parameters. The adhesion of the nanotubes prepared in this work was satisfactory for implantological applications.

  16. Interlayer catalytic exfoliation realizing scalable production of large-size pristine few-layer graphene

    Science.gov (United States)

    Geng, Xiumei; Guo, Yufen; Li, Dongfang; Li, Weiwei; Zhu, Chao; Wei, Xiangfei; Chen, Mingliang; Gao, Song; Qiu, Shengqiang; Gong, Youpin; Wu, Liqiong; Long, Mingsheng; Sun, Mengtao; Pan, Gebo; Liu, Liwei

    2013-01-01

    Mass production of reduced graphene oxide and graphene nanoplatelets has recently been achieved. However, a great challenge still remains in realizing large-quantity and high-quality production of large-size thin few-layer graphene (FLG). Here, we create a novel route to solve the issue by employing one-time-only interlayer catalytic exfoliation (ICE) of salt-intercalated graphite. The typical FLG with a large lateral size of tens of microns and a thickness less than 2 nm have been obtained by a mild and durative ICE. The high-quality graphene layers preserve intact basal crystal planes owing to avoidance of the degradation reaction during both intercalation and ICE. Furthermore, we reveal that the high-quality FLG ensures a remarkable lithium-storage stability (>1,000 cycles) and a large reversible specific capacity (>600 mAh g-1). This simple and scalable technique acquiring high-quality FLG offers considerable potential for future realistic applications.

  17. Increasing the productive efficiency of carabaos under smallholder farming systems

    International Nuclear Information System (INIS)

    Momongan, V.G.; Sarabia, A.S.; Roxas, N.P.; Palad, O.A.; Obsioma, A.R.; Nava, Z.M.; Del Barrio, A.N.

    1990-01-01

    There is a need to improve the reproductive efficiency of carabaos to meet the increasing demand for draught power, meat and milk. Under village conditions carabaos appear to have a pregnancy rate of 17.7%; this could be attributed greatly to tethering management, which prevents their natural breeding activities. Moreover, about 32% of the breedable female carabaos are acyclic and only 3.5% are in oestrus at any one time. Carabaos which are either cycling or pregnant have a better body condition than those which are acyclic or non-pregnant. The plasma progesterone level was very low at the time of insemination (<0.5 ng/mL), but gradually increased to above 2.0 ng/mL during the first and second trimesters of pregnancy. Thus, it was possible to diagnose early pregnancy and to confirm oestrus. A positive correlation was observed between plasma and milk progesterone concentrations during the oestrous cycle (r=0.60) and pregnancy (r=0.50). Oestrus synchronization was found to be a useful tool in implementing the cross-breeding of Philippine carabaos with riverine buffaloes through artificial insemination; an average pregnancy rate of about 30% was obtained using frozen semen. The performance of cross-breds showed that the weights at birth were about 36.0 ± 0.9 kg for Phil-Ravi, 33.6 ± 0.9 kg for Phil-Murrah compared with 26.8 ± 0.9 kg for Philippine carabaos. The weights of the three genotypes at 12 months were: 157.0 ± 9.8 kg for Philippine carabaos, 215.4 ± 7.7 kg for Phil-Ravi and 199.8 ± 12.1 kg for Phil-Murrah. At 2 years of age, the carabaos weighed 217.3 ± 18.6 kg, Phil-Ravi 365 ± 23.4 kg and Phil-Murrah 366.3 ± 19.4 kg. The results of this study show that progesterone measurement and oestrus synchronization can be used effectively for cross-breeding carabaos with the frozen semen of river buffaloes. (author). 9 refs, 5 figs, 4 tabs

  18. Synthesis of Zn–Fe layered double hydroxides via an oxidation process and structural analysis of products

    Energy Technology Data Exchange (ETDEWEB)

    Morimoto, Kazuya, E-mail: kazuya.morimoto@aist.go.jp [Institute for Geo-Resources and Environment, National Institute of Advanced Industrial Science and Technology (AIST), 1-1-1 Higashi, Tsukuba, Ibaraki 305-8567 (Japan); Tamura, Kenji [Environmental Remediation Materials Unit, National Institute for Materials Science (NIMS), 1-1 Namiki, Tsukuba, Ibaraki 305-0044 (Japan); Anraku, Sohtaro [Graduate School of Engineering, Hokkaido University, Kita 13 Nishi 8, Kita-ku, Sapporo 060-8628 (Japan); Sato, Tsutomu [Faculty of Engineering, Hokkaido University, Kita 13 Nishi 8, Kita-ku, Sapporo 060-8628 (Japan); Suzuki, Masaya [Institute for Geo-Resources and Environment, National Institute of Advanced Industrial Science and Technology (AIST), 1-1-1 Higashi, Tsukuba, Ibaraki 305-8567 (Japan); Yamada, Hirohisa [Environmental Remediation Materials Unit, National Institute for Materials Science (NIMS), 1-1 Namiki, Tsukuba, Ibaraki 305-0044 (Japan)

    2015-08-15

    The synthesis of Zn–Fe(III) layered double hydroxides was attempted, employing different pathways using either Fe(II) or Fe(III) species together with Zn as the initial reagents. The product derived from the synthesis employing Fe(II) was found to transition to a Zn–Fe(III) layered double hydroxides phase following oxidation process. In contrast, the product obtained with Fe(III) did not contain a layered double hydroxides phase, but rather consisted of simonkolleite and hydrous ferric oxide. It was determined that the valency of the Fe reagent used in the initial synthesis affected the generation of the layered double hydroxides phase. Fe(II) species have ionic radii and electronegativities similar to those of Zn, and therefore are more likely to form trioctahedral hydroxide layers with Zn species. - Graphical abstract: The synthesis of Zn–Fe(III) layered double hydroxides was attempted, employing different pathways using either Fe(II) or Fe(III) species together with Zn as the initial reagents. - Highlights: • Iron valency affected the generation of Zn–Fe layered double hydroxides. • Zn–Fe layered double hydroxides were successfully synthesized using Fe(II). • Fe(II) species were likely to form trioctahedral hydroxide layers with Zn species.

  19. LHCSR Expression under HSP70/RBCS2 Promoter as a Strategy to Increase Productivity in Microalgae

    OpenAIRE

    Perozeni, Federico; Stella, Giulio Rocco; Ballottari, Matteo

    2018-01-01

    Microalgae are unicellular photosynthetic organisms considered as potential alternative sources for biomass, biofuels or high value products. However, limited biomass productivity is commonly experienced in their cultivating system despite their high potential. One of the reasons for this limitation is the high thermal dissipation of the light absorbed by the outer layers of the cultures exposed to high light caused by the activation of a photoprotective mechanism called non-photochemical que...

  20. Quantifying Ozone Production throughout the Boundary Layer from High Frequency Tethered Profile Measurements during a High Ozone Episode in the Uinta Basin, Utah

    Science.gov (United States)

    Sterling, C. W.; Johnson, B.; Schnell, R. C.; Oltmans, S. J.; Cullis, P.; Hall, E. G.; Jordan, A. F.; Windell, J.; McClure-Begley, A.; Helmig, D.; Petron, G.

    2015-12-01

    During the Uinta Basin Winter Ozone Study (UBWOS) in Jan - Feb 2013, 735 tethered ozonesonde profiles were obtained at 3 sites including during high wintertime photochemical ozone production events that regularly exceeded 125 ppb. High resolution profiles of ozone and temperature with altitude, measured during daylight hours, showed the development of approximately week long high ozone episodes building from background levels of ~40 ppb to >150 ppb. The topography of the basin combined with a strong temperature inversion trapped oil and gas production effluents in the basin and the snow covered surface amplified the sun's radiation driving the photochemical ozone production at rates up to 13 ppb/hour in a cold layer capped at 1600-1700 meters above sea level. Beginning in mid-morning, ozone mixing ratios throughout the cold layer increased until late afternoon. Ozone mixing ratios were generally constant with height indicating that ozone production was nearly uniform throughout the depth of the cold pool. Although there was strong diurnal variation, ozone mixing ratios increased during the day more than decreased during the night, resulting in elevated levels the next morning; an indication that nighttime loss processes did not compensate for daytime production. Even though the 3 tethersonde sites were at elevations differing by as much as 140 m, the top of the high ozone layer was nearly uniform in altitude at the 3 locations. Mobile van surface ozone measurements across the basin confirmed this capped structure of the ozone layer; the vehicle drove out of high ozone mixing ratios at an elevation of ~1900 meters above sea level, above which free tropospheric ozone mixing ratios of ~50 ppb were measured. Exhaust plumes from a coal-fired power plant in the eastern portion of the basin were intercepted by the tethersondes. The structure of the profiles clearly showed that effluents in the plumes were not mixed downward and thus did not contribute precursor nitrogen

  1. Improvement of the crystallinity and photocatalytic property of zinc oxide as calcination product of Zn–Al layered double hydroxide

    International Nuclear Information System (INIS)

    Ahmed, Abdullah Ahmed Ali; Talib, Zainal Abidin; Hussein, Mohd Zobir bin; Zakaria, Azmi

    2012-01-01

    Highlights: ► ZnO phase and ZnAl 2 O 4 spinel can be formed as Zn–Al–NO 3 –LDH calcination products. ► The crystallinity of ZnO phase increased with an increase of calcination temperature. ► The optical band gaps of ZnO were improved with an increase in temperature. ► The oxygen vacancies in ZnO and ZnAl 2 O 4 generated the ESR signals. - Abstract: Zinc oxide with different degrees of crystallinity can be formed as Zn–Al-layered double hydroxide (Zn–Al–NO 3 –LDH) calcination products. ZnAl 2 O 4 spinel is also formed in a range of calcination temperatures from 600 to 1000 °C from the LDH. X-ray diffraction patterns showed that the crystallinity of the ZnO phase increased as calcination temperatures increased. The LDH structure was fully collapsed at and above 400 °C. The photocatalytic activity was determined by UV–VIS–NIR diffuse reflectance spectroscopy. The band gap of the calcined samples increased as the calcination temperature increased. Electron spin resonance (ESR) spectra of the fresh and calcined LDH at room temperature demonstrated that oxygen vacancies in the ZnO and ZnAl 2 O 4 were responsible for the generation of ESR signals. One BET specific surface area increased from 1 m 2 /g for the LDH to a maximum at 400 °C (43 m 2 /g) and decreased thereafter down to 6 m 2 /g at 1000 °C.

  2. Effect of whole yeast cell product supplementation (CitriStim®) on immune responses and cecal microflora species in pullet and layer chickens during an experimental coccidial challenge.

    Science.gov (United States)

    Markazi, Ashley D; Perez, Victor; Sifri, Mamduh; Shanmugasundaram, Revathi; Selvaraj, Ramesh K

    2017-07-01

    Three separate experiments were conducted to study the effects of whole yeast cell product supplementation in pullets and layer hens. Body weight gain, fecal and intestinal coccidial oocyst counts, cecal microflora species, cytokine mRNA amounts, and CD4+ and CD8+ T-cell populations in the cecal tonsils were analyzed following an experimental coccidial infection. In Experiment I, day-old Leghorn layer chicks were fed 3 experimental diets with 0, 0.1, or 0.2% whole yeast cell product (CitriStim®, ADM, Decatur, IL). At 21 d of age, birds were challenged with 1 × 105 live coccidial oocysts. Supplementation with whole yeast cell product decreased the fecal coccidial oocyst count at 7 (P = 0.05) and 8 (P product and challenged with 1 × 105 live coccidial oocysts on d 25 of whole yeast cell product feeding. Supplementation with whole yeast cell product decreased the coccidial oocyst count in the intestinal content (P product increased relative proportion of Lactobacillus (P product decreased CD8+ T cell percentages (P product and challenged with 1 × 105 live coccidial oocysts on d 66 of whole yeast cell product feeding. At 5 d post-coccidial challenge, whole yeast cell product supplementation down-regulated (P = 0.01) IL-10 mRNA amount. It could be concluded that supplementing whole yeast cell product can help minimize coccidial infection in both growing pullets and layer chickens. © 2017 Poultry Science Association Inc.

  3. The Impact of Productivity Increasing in Indonesian Maritim Sector: General Equilibrium Analysis

    Directory of Open Access Journals (Sweden)

    Widyastutik Widyastutik

    2016-09-01

    Full Text Available The increase in productivity in the maritime sector will realize the maritime sector as a prime mover. This study aims to analyze the impact of the maritime sector productivity improvement on the performance of the economy. This research simulates increased productivity in the maritime sector (consisting of the fisheries, oil, gas sub-sector and marine transport services sector using the Global Trade Analysis Project (GTAP version 8. Simulation analysis showed an increase in productivity in the maritime sector has a positive impact on welfare, real GDP, and trade balance of Indonesia. However, the impact of the increase in productivity is not followed by an increase in output in all sectors. This indicates that if the increase in productivity occurs only in the maritime sector alone without being followed by an increase in productivity in other sectors, the sectoral performance is not optimal.DOI: 10.15408/sjie.v5i2.3403

  4. Pre- and Peri-/Post-Compaction Follistatin Treatment Increases In Vitro Production of Cattle Embryos.

    Directory of Open Access Journals (Sweden)

    Guo Zhenhua

    Full Text Available Our previous studies demonstrated that maternal (oocyte derived follistatin (FST expression is positively associated with bovine oocyte competence and exogenous follistatin treatment during the pre-compaction period of development (d 1-3 post insemination is stimulatory to bovine early embryogenesis in vitro [blastocyst rates and cell numbers/allocation to trophectoderm (TE]. In the present study, bovine embryos were treated with exogenous follistatin during d 1-3, d 4-7 and d 1-7 post insemination to test the hypothesis that embryotropic effects of exogenous follistatin are specific to the pre-compaction period (d 1-3 of early embryogenesis. Follistatin treatment during d 4-7 (peri-/post-compaction period of embryo culture increased proportion of embryos reaching blastocyst and expanded blastocyst stage and total cell numbers compared to controls, but blastocyst rates and total cell numbers were lower than observed following d 1-3 (pre-compaction follistatin treatment. Follistatin supplementation during d 1-7 of embryo culture increased development to blastocyst and expanded blastocyst stages and blastocyst total cell numbers compared to d 1-3 and d 4-7 follistatin treatment and untreated controls. A similar increase in blastocyst CDX2 mRNA and protein (TE cell marker was observed in response to d 1-3, d 4-7 and d 1-7 follistatin treatment. However, an elevation in blastocyst BMP4 protein (TE cell regulator was observed in response to d 1-3 and d 1-7, but not d 4-7 (peri-/post-compaction follistatin treatment. In summary, our study revealed the potential utility of follistatin treatment for increasing the success rate of in vitro embryo production in cattle. Such results also expand our understanding of the embryotropic actions of follistatin and demonstrate that follistatin actions on blastocyst development and cell allocation to the TE layer are not specific to the pre-compaction period.

  5. Thin-layer chromatographic determination of erythromycin and other macrolide antibiotics in livestock products.

    Science.gov (United States)

    Petz, M; Solly, R; Lymburn, M; Clear, M H

    1987-01-01

    A method is described for determination of 4 macrolide antibiotics in livestock products. Erythromycin, tylosin, oleandomycin, and spiramycin were extracted from animal tissues, milk, and egg with acetonitrile at pH 8.5. Cleanup was done by adding sodium chloride and dichloromethane, evaporating the organic layer, and subsequent acid/base partitioning. After the antibiotics were separated by thin-layer chromatography (TLC), they were reacted with xanthydrol and could be detected as purple spots down to 0.02 mg/kg without interference by other commonly used therapeutic drugs (23 were tested). Anisaldehyde-sulfuric acid, cerium sulfate-molybdic acid, phosphomolybdic acid, and Dragendorff's reagent proved to be less sensitive as visualizing agents. For quantitation, TLC plates were scanned at 525 nm. Recoveries were between 71 and 96% for erythromycin and tylosin in liver, muscle, and egg at the 0.1-0.5 mg/kg level and 51% for erythromycin in milk at the 0.02 mg/kg level (coefficient of variation = 10-18%). Bioautography with Bacillus subtilis was used to confirm results, in addition to TLC analysis of derivatized antibiotics and liquid chromatography with electrochemical detection. Various derivatization procedures for erythromycin were investigated for improved ultra-violet or fluorescence detection in liquid chromatography.

  6. A multi-layered approach to product architecture modeling: Applied to technology prototypes

    DEFF Research Database (Denmark)

    Ravn, Poul Martin; Guðlaugsson, Tómas Vignir; Mortensen, Niels Henrik

    2016-01-01

    Companies that wish to include novel technology in the product portfolio may need to test and evaluate the technology with the use of prototypes to learn its benefits. Without clear knowledge of the benefits of the technology to the products in the portfolio, in the form of increased performance...... and managing technology prototypes and can be correlated with improvements in the team collaboration, communication, and development performance......., added functions, or material savings, the prototype development can be hard to manage. In this article, two contributions are made. The first adds to the vocabulary of prototyping, defining technology prototype, a prototype used for testing a novel technology in the context of an existing product...

  7. CACAO: A project for a laboratory for the production and characterization of thin radioactive layers

    Energy Technology Data Exchange (ETDEWEB)

    Bacri, C.O., E-mail: bacri@ipno.in2p3.f [Institut de Physique Nucleaire d' Orsay, 91406 Orsay Cedex, CNRS (UMR8608-IN2P3), Universite Paris-Sud (Paris XI) (France); Petitbon, V.; Pierre, S. [Institut de Physique Nucleaire d' Orsay, 91406 Orsay Cedex, CNRS (UMR8608-IN2P3), Universite Paris-Sud (Paris XI) (France)

    2010-02-11

    CACAO, Chimie des Actinides et Cibles radioActives a Orsay (actinide chemistry and radioactive targets at Orsay), is a project under construction that consists of the installation of a hot laboratory dedicated to the production and characterization of thin radioactive layers. The project aims to be a joint CNRS-CEA national laboratory to overcome difficulties related mainly to safety issues and to the lack of knowledge and potential manpower. The first goal is to fulfill, at least, the needs of the whole French community, and to be able to coordinate the different activities related to radioactive targets. For this purpose, itis important to be complementary to already existing international installations. Inside this framework, it will of course be possible to produce and/or characterize targets for other users.

  8. CACAO: A project for a laboratory for the production and characterization of thin radioactive layers

    Science.gov (United States)

    Bacri, C. O.; Petitbon, V.; Pierre, S.; Cacao Group

    2010-02-01

    CACAO, Chimie des Actinides et Cibles radioActives à Orsay (actinide chemistry and radioactive targets at Orsay), is a project under construction that consists of the installation of a hot laboratory dedicated to the production and characterization of thin radioactive layers. The project aims to be a joint CNRS-CEA national laboratory to overcome difficulties related mainly to safety issues and to the lack of knowledge and potential manpower. The first goal is to fulfill, at least, the needs of the whole French community, and to be able to coordinate the different activities related to radioactive targets. For this purpose, itis important to be complementary to already existing international installations. Inside this framework, it will of course be possible to produce and/or characterize targets for other users.

  9. CACAO: A project for a laboratory for the production and characterization of thin radioactive layers

    International Nuclear Information System (INIS)

    Bacri, C.O.; Petitbon, V.; Pierre, S.

    2010-01-01

    CACAO, Chimie des Actinides et Cibles radioActives a Orsay (actinide chemistry and radioactive targets at Orsay), is a project under construction that consists of the installation of a hot laboratory dedicated to the production and characterization of thin radioactive layers. The project aims to be a joint CNRS-CEA national laboratory to overcome difficulties related mainly to safety issues and to the lack of knowledge and potential manpower. The first goal is to fulfill, at least, the needs of the whole French community, and to be able to coordinate the different activities related to radioactive targets. For this purpose, itis important to be complementary to already existing international installations. Inside this framework, it will of course be possible to produce and/or characterize targets for other users.

  10. Consumer Surplus in the Digital Economy: Estimating the Value of Increased Product Variety at Online Booksellers

    OpenAIRE

    Brynjolfsson, Erik; Smith, Michael D.; Yu, (Jeffrey) Hu

    2003-01-01

    We present a framework and empirical estimates that quantify the economic impact of increased product variety made available through electronic markets. While efficiency gains from increased competition significantly enhance consumer surplus, for instance, by leading to lower average selling prices, our present research shows that increased product variety made available through electronic markets can be a significantly larger source of consumer surplus gains. One reason for increased product...

  11. Herbivore effects on productivity vary by guild: cattle increase mean productivity while wildlife reduce variability.

    Science.gov (United States)

    Charles, Grace K; Porensky, Lauren M; Riginos, Corinna; Veblen, Kari E; Young, Truman P

    2017-01-01

    Wild herbivores and livestock share the majority of rangelands worldwide, yet few controlled experiments have addressed their individual, additive, and interactive impacts on ecosystem function. While ungulate herbivores generally reduce standing biomass, their effects on aboveground net primary production (ANPP) can vary by spatial and temporal context, intensity of herbivory, and herbivore identity and species richness. Some evidence indicates that moderate levels of herbivory can stimulate aboveground productivity, but few studies have explicitly tested the relationships among herbivore identity, grazing intensity, and ANPP. We used a long-term exclosure experiment to examine the effects of three groups of wild and domestic ungulate herbivores (megaherbivores, mesoherbivore wildlife, and cattle) on herbaceous productivity in an African savanna. Using both field measurements (productivity cages) and satellite imagery, we measured the effects of different herbivore guilds, separately and in different combinations, on herbaceous productivity across both space and time. Results from both productivity cage measurements and satellite normalized difference vegetation index (NDVI) demonstrated a positive relationship between mean productivity and total ungulate herbivore pressure, driven in particular by the presence of cattle. In contrast, we found that variation in herbaceous productivity across space and time was driven by the presence of wild herbivores (primarily mesoherbivore wildlife), which significantly reduced heterogeneity in ANPP and NDVI across both space and time. Our results indicate that replacing wildlife with cattle (at moderate densities) could lead to similarly productive but more heterogeneous herbaceous plant communities in rangelands. © 2016 by the Ecological Society of America.

  12. Production of ultrahigh ion current densities at skin-layer subrelativistic laser-plasma interaction

    Energy Technology Data Exchange (ETDEWEB)

    Badziak, J [Institute of Plasma Physics and Laser Microfusion, Warsaw (Poland); Glowacz, S [Institute of Plasma Physics and Laser Microfusion, Warsaw (Poland); Jablonski, S [Institute of Plasma Physics and Laser Microfusion, Warsaw (Poland); Parys, P [Institute of Plasma Physics and Laser Microfusion, Warsaw (Poland); Wolowski, J [Institute of Plasma Physics and Laser Microfusion, Warsaw (Poland); Hora, H [Department of Theoretical Physics, University of New South Wales, Sydney (Australia); Krasa, J [Institute of Physics, ASCR, Prague (Czech Republic); Laska, L [Institute of Physics, ASCR, Prague (Czech Republic); Rohlena, K [Institute of Physics, ASCR, Prague (Czech Republic)

    2004-12-01

    Some applications of fast ions driven by a short ({<=}1 ps) laser pulse (e.g. fast ignition of ICF targets, x-ray laser pumping, laboratory astrophysics research or some nuclear physics experiments) require ion beams of picosecond (or shorter) time durations and of very high ion current densities ({approx}10{sup 10} A cm{sup -2} or higher). A possible way of producing ion beams with such extreme parameters is ballistic focusing of fast ions generated by a target normal sheath acceleration (TNSA) mechanism at relativistic laser intensities. In this paper we discuss another method, where the production of short-pulse ion beams of ultrahigh current densities is possible in a planar geometry at subrelativistic laser intensities and at a low energy ({<=}1 J) of the laser pulse. This method-referred to as skin-layer ponderomotive acceleration (S-LPA)-uses strong ponderomotive forces induced at the skin-layer interaction of a short laser pulse with a proper preplasma layer in front of a solid target. The basic features of the high-current ion generation by S-LPA were investigated using a simplified theory, numerical hydrodynamic simulations and measurements. The experiments were performed with subjoule 1 ps laser pulses interacting with massive or thin foil targets at intensities of up to 2 x 10{sup 17} W cm{sup -2}. It was found that both in the backward and forward directions highly collimated high-density ion beams (plasma blocks) with current densities at the ion source (close to the target) approaching 10{sup 10} A cm{sup -2} are produced, in accordance with the theory and numerical calculations. These ion current densities were found to be comparable to (or even higher than) those estimated from recent short-pulse TNSA experiments with relativistic laser intensities. Apart from the simpler physics of the laser-plasma interaction, the advantage of the considered method is the low energy of the driving laser pulses allowing the production of ultrahigh

  13. Effects of Supplementation of Alkaloid and Non Alkaloid from Sauropus androgynus Leaves on Egg Production and Lipid Profil in Layer Chicken

    Directory of Open Access Journals (Sweden)

    U Santoso

    2010-09-01

    Full Text Available The present study was conducted to evaluate effects of supplementation of alkaloid or non alkaloid from Sauropus androgynus leaves on productive performance and the contents of lipid fractions in layer chickens. Forty two layer chickens aged 30 weeks were distributed to seven treatment groups. Each treatment group contained six layer chickens maintained in an individual cage, respectively. The present experiment used completely randomized experimental design. The seven treatment groups were as follows: 1 Control, layer chickens were fed diet without supplementation of alkaloid or non alkaloid extracted from Sauropus androgynus (P0; 2 Layer chickens were fed diet contained 30 mg non alkaloid/kg diet (P1; 3 Layer chickens were fed diet contained 60 mg non alkaloid/kg diet (P2; 4 Layer chickens were fed diet contained 90 mg non alkaloid/kg diet (P3; 5 Layer chickens were fed diet contained 30 mg alkaloid/kg diet (P4; 6 Layer chickens were fed diet contained 60 mg alkaloid/kg diet (P5; 7 Layer chickens were fed diet contained 90 mg alkaloid/kg diet (P6. Layer chickens were fed experimental diet with 2,750 kcal/kg Metabolizable Energy (ME and 16.0% protein. Diet and drinking water were fed ad libitum. Experimental results showed that supplementation of alkaloid or non alkaloid from Sauropus androgynus leaves significantly affected productive performance in layer chickens. It appear that non alkaloid supplementation had no advantage in improving productive performance, whereas supplementation of 30 mg alkaloid/kg diet might have advantages in improving productive performance as indicated by better egg production and lower feed conversion ratio. Treatment had no effect on glucose and triglyceride concentration in serum, but it affected total cholesterol, HDL-cholesterol, LDL+VLDL-cholesterol and atherogenic index in serum. Cholesterol concentration in serum was significantly increased in P4 and P6, whereas HDL-cholesterol concentration was

  14. Heterogeneous photocatalysis with transition metal modified layered titanates for solar hydrogen production

    Energy Technology Data Exchange (ETDEWEB)

    Pilarski, Martin

    2016-09-05

    The objective of this work was the validation of Cu as a low priced co-catalyst material in comparison to the frequently used noble metal co-catalysts Rh, Au and Pt, as well as the evaluation of alternative sacrificial agents for photocatalytic H2 production. An effective conversion of glycerol was a primary aim of this work, due to its abundance as a coproduct of the bio fuel production. Furthermore, photocatalysts were prepared, which are capable to absorb light from the visible range of the light spectrum. The required band gap reduction was realized by cation doping. In the course of the cation doping process Cu{sup 2+}, Cr{sup 3+}, Fe{sup 3+} and Mn{sup 3+} cations were incorporated by a sol-gel synthesis route into the crystal lattice of the layered Cs{sub 0.68}Ti{sub 1.83}O{sub 4}, which was used as a photocatalyst material. The photocatalytic activity of the prepared photocatalysts was investigated in a self constructed test setup under the irradiation of a xenon arc lamp.

  15. Production of a textile reinforced concrete protective layers with non-woven polypropylene fabric

    Science.gov (United States)

    Žák, J.; Štemberk, P.; Vodička, J.

    2017-09-01

    Textile concrete with nonwoven polypropylene fabric can be used for protective layers of reinforced concrete structures, reducing the thickness of the cover layer or reducing the water penetration rate into the structure. The material consists of cement matrix with finegrained aggregate and nonwoven textile reinforcement. The maximum grain size of the mixture suitable for the nonwoven textile infiltration is 0.25 mm. The interlayer contains larger aggregates and short fibers. Tensile loading causes a large amount of microcracks in the material. The material can withstand strain over 25% without collapsing. Increased quality and water-cement ratio reduction was achieved using the plasticizers and distribution of the mixture into a fabric using a vibrating trowel. It is possible to make flat plates and even curved structures from this material. Larger curvatures of structures should be solved by cutting and overlapping the fabric. Small curvatures can be solved within the deformability of the fabric. Proper infiltration of the cement mixture into the fabric is the most important task in producing this material.

  16. Turbulence production in an APG-boundary-layer transition induced by randomized perturbations

    Science.gov (United States)

    Borodulin, V. I.; Kachanov, Y. S.; Roschektayev, A. P.

    This paper is devoted to an experimental investigation of formation and development of coherent vortical structures at late stages of a laminar-turbulent transition initiated by a harmonic, almost two-dimensional Tollmien-Schlichting (TS) wave perturbed by weak (initially) broadband disturbances. The initial base flow represented a self-similar boundary layer with an adverse pressure gradient (APG) with Hartree parameter ßH = -0.115. Experiments were performed at controlled disturbance conditions with the help of the ‘deterministic noise’ method and a universal disturbance source of instability waves. The main measurements were carried out by means of a hot-wire anemometer in a broad spatial region of the flow starting with stages of quasi-sinusoidal small-amplitude instability wave and ending with final stages of transition characterized by formation of concentrated localized vortical structures. The excited perturbations were partly random (within 20 TS-wave fundamental periods) but periodical at very large time scales during which the flow passes the model several times. The detailed measurements and the experimental data processing gave us the possibility to obtain instantaneous velocity and vorticity fields in the (x, y, z, t)-space and to perform computer-aided ‘visualization’ of the instantaneous flow structure. Specific features of the turbulence production mechanism occurring at late stages of transition are studied and compared with previously reported data obtained at sinusoidal excitation. A qualitative similarity is found between essentially nonlinear stages of transition observed in the present (randomized) case and those studied previously in cases of transition initiated by a harmonic TS wave or by a TS wave packet. It is found that interaction of primary wave with a broadband ‘noise’ of 3D TS waves leads at late stages of transition to formation of ?-vortices, intensive ? -shaped high-shear (HS) layers, O -shaped vortices, ring

  17. Experimentally increased nutrient availability at the permafrost thaw front selectively enhances biomass production of deep-rooting subarctic peatland species.

    Science.gov (United States)

    Keuper, Frida; Dorrepaal, Ellen; van Bodegom, Peter M; van Logtestijn, Richard; Venhuizen, Gemma; van Hal, Jurgen; Aerts, Rien

    2017-10-01

    Climate warming increases nitrogen (N) mineralization in superficial soil layers (the dominant rooting zone) of subarctic peatlands. Thawing and subsequent mineralization of permafrost increases plant-available N around the thaw-front. Because plant production in these peatlands is N-limited, such changes may substantially affect net primary production and species composition. We aimed to identify the potential impact of increased N-availability due to permafrost thawing on subarctic peatland plant production and species performance, relative to the impact of increased N-availability in superficial organic layers. Therefore, we investigated whether plant roots are present at the thaw-front (45 cm depth) and whether N-uptake ( 15 N-tracer) at the thaw-front occurs during maximum thaw-depth, coinciding with the end of the growing season. Moreover, we performed a unique 3-year belowground fertilization experiment with fully factorial combinations of deep- (thaw-front) and shallow-fertilization (10 cm depth) and controls. We found that certain species are present with roots at the thaw-front (Rubus chamaemorus) and have the capacity (R. chamaemorus, Eriophorum vaginatum) for N-uptake from the thaw-front between autumn and spring when aboveground tissue is largely senescent. In response to 3-year shallow-belowground fertilization (S) both shallow- (Empetrum hermaphroditum) and deep-rooting species increased aboveground biomass and N-content, but only deep-rooting species responded positively to enhanced nutrient supply at the thaw-front (D). Moreover, the effects of shallow-fertilization and thaw-front fertilization on aboveground biomass production of the deep-rooting species were similar in magnitude (S: 71%; D: 111% increase compared to control) and additive (S + D: 181% increase). Our results show that plant-available N released from thawing permafrost can form a thus far overlooked additional N-source for deep-rooting subarctic plant species and increase their

  18. The effect of the electrical double layer on hydrodynamic lubrication: a non-monotonic trend with increasing zeta potential

    Directory of Open Access Journals (Sweden)

    Dalei Jing

    2017-07-01

    Full Text Available In the present study, a modified Reynolds equation including the electrical double layer (EDL-induced electroviscous effect of lubricant is established to investigate the effect of the EDL on the hydrodynamic lubrication of a 1D slider bearing. The theoretical model is based on the nonlinear Poisson–Boltzmann equation without the use of the Debye–Hückel approximation. Furthermore, the variation in the bulk electrical conductivity of the lubricant under the influence of the EDL is also considered during the theoretical analysis of hydrodynamic lubrication. The results show that the EDL can increase the hydrodynamic load capacity of the lubricant in a 1D slider bearing. More importantly, the hydrodynamic load capacity of the lubricant under the influence of the EDL shows a non-monotonic trend, changing from enhancement to attenuation with a gradual increase in the absolute value of the zeta potential. This non-monotonic hydrodynamic lubrication is dependent on the non-monotonic electroviscous effect of the lubricant generated by the EDL, which is dominated by the non-monotonic electrical field strength and non-monotonic electrical body force on the lubricant. The subject of the paper is the theoretical modeling and the corresponding analysis.

  19. Electrode Mass Balancing as an Inexpensive and Simple Method to Increase the Capacitance of Electric Double-Layer Capacitors

    Science.gov (United States)

    Andres, Britta; Engström, Ann-Christine; Blomquist, Nicklas; Forsberg, Sven; Dahlström, Christina; Olin, Håkan

    2016-01-01

    Symmetric electric double-layer capacitors (EDLCs) have equal masses of the same active material in both electrodes. However, having equal electrode masses may prevent the EDLC to have the largest possible specific capacitance if the sizes of the hydrated anions and cations in the electrolyte differ because the electrodes and the electrolyte may not be completely utilized. Here we demonstrate how this issue can be resolved by mass balancing. If the electrode masses are adjusted according to the size of the ions, one can easily increase an EDLC’s specific capacitance. To that end, we performed galvanostatic cycling to measure the capacitances of symmetric EDLCs with different electrode mass ratios using four aqueous electrolytes— Na2SO4, H2SO4, NaOH, and KOH (all with a concentration of 1 M)—and compared these to the theoretical optimal electrode mass ratio that we calculated using the sizes of the hydrated ions. Both the theoretical and experimental values revealed lower-than-1 optimal electrode ratios for all electrolytes except KOH. The largest increase in capacitance was obtained for EDLCs with NaOH as electrolyte. Specifically, we demonstrate an increase of the specific capacitance by 8.6% by adjusting the electrode mass ratio from 1 to 0.86. Our findings demonstrate that electrode mass balancing is a simple and inexpensive method to increase the capacitance of EDLCs. Furthermore, our results imply that one can reduce the amount of unused material in EDLCs and thus decrease their weight, volume and cost. PMID:27658253

  20. Changing Quality Controls: The Effects of Increasing Product Variety and Shortening Product Life Cycles

    NARCIS (Netherlands)

    J.D. van Iwaarden (Jos)

    2006-01-01

    textabstractIn veel bedrijfstakken (bijv. auto’s, elektronica, kleding) is de complexiteit en onvoorspelbaarheid van productieprocessen in de afgelopen jaren toegenomen als gevolg van de voortdurend toenemende variëteit aan producten en de steeds korterwordende product levenscycli. Tegelijkertijd

  1. An approach for siting poplar energy production systems to increase productivity and associated ecosystem services

    Science.gov (United States)

    R.S. Jr. Zalesny; D.M. Donner; D.R. Coyle; W.L. Headlee; R.B. Hall

    2010-01-01

    Short rotation woody crops (SRWC) such as Populus species and hybrids (i.e., poplars) are renewable energy feedstocks that are vital to reducing our dependence on non-renewable and foreign sources of energy used for heat, power, and transportation fuels. Highly productive poplars grown primarily on marginal agricultural sites are an important...

  2. Hydrogen peroxide production is not primarily increased in human myotubes established from type 2 diabetic subjects.

    Science.gov (United States)

    Minet, A D; Gaster, M

    2011-09-01

    Increased oxidative stress and mitochondrial dysfunction have been implicated in the development of insulin resistance in type 2 diabetes. To date, it is unknown whether increased mitochondrial reactive oxygen species (ROS) production in skeletal muscle from patients with type 2 diabetes is primarily increased or a secondary adaptation to environmental, lifestyle, and hormonal factors. This study investigates whether ROS production is primarily increased in isolated diabetic myotubes. Mitochondrial membrane potential, hydrogen peroxide (H(2)O(2)), superoxide, and mitochondrial mass were determined in human myotubes precultured under normophysiological conditions. Furthermore, the corresponding ATP synthesis was measured in isolated mitochondria. Muscle biopsies were taken from 10 lean subjects, 10 obese subjects, and 10 subjects with type 2 diabetes; satellite cells were isolated, cultured, and differentiated to myotubes. Mitochondrial mass, membrane potential/mitochondrial mass, and superoxide-production/mitochondrial mass were not different between groups. In contrast, H(2)O(2) production/mitochondrial mass and ATP production were significantly reduced in diabetic myotubes compared to lean controls (P production is not primarily increased in diabetic myotubes but rather is reduced. Moreover, the comparable ATP/H(2)O(2) ratios indicate that the reduced ROS production in diabetic myotubes parallels the reduced ATP production because ROS production in diabetic myotubes must be considered to be in a proportion comparable to lean. Thus, the increased ROS production seen in skeletal muscle of type 2 diabetic patients is an adaptation to the in vivo conditions.

  3. Ethnic hair care products may increase false positives in hair drug testing.

    Science.gov (United States)

    Kidwell, David A; Smith, Frederick P; Shepherd, Arica R

    2015-12-01

    The question of why different races appear more susceptible to hair contamination by external drugs remains controversial. This research studied susceptibility of head hair to external cocaine and methamphetamine when hair products have been applied. Three different chemical classes of ethnic hair products were applied to Caucasian, Asian, and African hair. Some products increased the methamphetamine and cocaine concentrations in all hair types. A unique finding of this research is that certain ethnic hair products can replace moisture as a diffusion medium, thereby increasing the susceptibility to contamination over 100-fold compared to petroleum-based products. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

  4. Increasing Student Interest and Comprehension of Production Planning and Control and Operations Performance Measurement Concepts Using a Production Line Game

    Science.gov (United States)

    Cox, James F., III; Walker, Edward D., II

    2005-01-01

    Production planning and control (PPC) systems and operations performance measures are topics that students generally find both boring and difficult to understand. In the article, the authors present a production line game that they have found to be an effective tool to increase student interest in the topics as well as student comprehension. The…

  5. The Utilization of Fungi and Their Products to Increase Livestock Production

    OpenAIRE

    Riza Zainuddin Ahmad

    2011-01-01

    Fungi as part of eukaryotic organisms play an important role for livestock. Some fungi are detrimental because they cause animal diseases, and some fungi are beneficial because they can improve animal productivity. The use of fungi that benefit from starting he has done as agents of biological control and to be as probiotics.Within the fungi, the use of simple technologies to high level degree for the benefit of cattle is developed. This paper describes some fungi that are beneficial and dire...

  6. Oxytocin increases extrapancreatic glucagon secretion and glucose production in pancreatectomized dogs

    International Nuclear Information System (INIS)

    Altszuler, N.; Puma, F.; Winkler, B.; Fontan, N.; Saudek, C.D.

    1986-01-01

    Infusion of oxytocin into normal dogs increases plasma levels of insulin and glucagon and glucose production and uptake. To determine whether infused oxytocin also increases glucagon secretion from extrapancreatic sites, pancreatectomized dogs, off insulin of 18 hr, were infused with oxytocin and plasma glucagon, and glucose production and uptake were measured using the [6- 3 H]glucose primer-infusion technique. The diabetic dogs, in the control period, had elevated plasma glucose and glucagon levels, an increased rate of glucose production, and a relative decrease in glucose uptake (decreased clearance). Infusion of oxytocin (500 μU/kg/min) caused a rise in plasma glucagon and glucose levels, increased glucose production, and further decreased glucose clearance. it is concluded that oxytocin can stimulate secretion of extrapancreatic glucagon, which contributes to the increased glucose production

  7. arXiv Production and Integration of the ATLAS Insertable B-Layer

    CERN Document Server

    Abbott, B.; Alberti, F.; Alex, M.; Alimonti, G.; Alkire, S.; Allport, P.; Altenheiner, S.; Ancu, L.S.; Anderssen, E.; Andreani, A.; Andreazza, A.; Axen, B.; Arguin, J.; Backhaus, M.; Balbi, G.; Ballansat, J.; Barbero, M.; Barbier, G.; Bassalat, A.; Bates, R.; Baudin, P.; Battaglia, M.; Beau, T.; Beccherle, R.; Bell, A.; Benoit, M.; Bermgan, A.; Bertsche, C.; Bertsche, D.; Bilbao de Mendizabal, J.; Bindi, F.; Bomben, M.; Borri, M.; Bortolin, C.; Bousson, N.; Boyd, R.G.; Breugnon, P.; Bruni, G.; Brossamer, J.; Bruschi, M.; Buchholz, P.; Budun, E.; Buttar, C.; Cadoux, F.; Calderini, G.; Caminada, L.; Capeans, M.; Carney, R.; Casse, G.; Catinaccio, A.; Cavalli-Sforza, M.; Červ, M.; Cervelli, A.; Chau, C.C.; Chauveau, J.; Chen, S.P.; Chu, M.; Ciapetti, M.; Cindro, V.; Citterio, M.; Clark, A.; Cobal, M.; Coelli, S.; Collot, J.; Crespo-Lopez, O.; Dalla Betta, G.F.; Daly, C.; D'Amen, G.; Dann, N.; Dao, V.; Darbo, G.; DaVia, C.; David, P.; Debieux, S.; Delebecque, P.; De Lorenzi, F.; de Oliveira, R.; Dette, K.; Dietsche, W.; Di Girolamo, B.; Dinu, N.; Dittus, F.; Diyakov, D.; Djama, F.; Dobos, D.; Dondero, P.; Doonan, K.; Dopke, J.; Dorholt, O.; Dube, S.; Dzahini, D.; Egorov, K.; Ehrmann, O.; Einsweiler, K.; Elles, S.; Elsing, M.; Eraud, L.; Ereditato, A.; Eyring, A.; Falchieri, D.; Falou, A.; Fausten, C.; Favareto, A.; Favre, Y.; Feigl, S.; Fernandez Perez, S.; Ferrere, D.; Fleury, J.; Flick, T.; Forshaw, D.; Fougeron, D.; Franconi, L.; Gabrielli, A.; Gaglione, R.; Gallrapp, C.; Gan, K.K.; Garcia-Sciveres, M.; Gariano, G.; Gastaldi, T.; Gavrilenko, I.; Gaudiello, A.; Geffroy, N.; Gemme, C.; Gensolen, F.; George, M.; Ghislain, P.; Giangiacomi, N.; Gibson, S.; Giordani, M.P.; Giugni, D.; Gjersdal, H.; Glitza, K.W.; Gnani, D.; Godlewski, J.; Gonella, L.; Gonzalez-Sevilla, S.; Gorelov, I.; Gorišek, A.; Gössling, C.; Grancagnolo, S.; Gray, H.; Gregor, I.; Grenier, P.; Grinstein, S.; Gris, A.; Gromov, V.; Grondin, D.; Grosse-Knetter, J.; Guescini, F.; Guido, E.; Gutierrez, P.; Hallewell, G.; Hartman, N.; Hauck, S.; Hasi, J.; Hasib, A.; Hegner, F.; Heidbrink, S.; Heim, T.; Heinemann, B.; Hemperek, T.; Hessey, N.P.; Hetmánek, M.; Hinman, R.R.; Hoeferkamp, M.; Holmes, T.; Hostachy, J.; Hsu, S.C.; Hügging, F.; Husi, C.; Iacobucci, G.; Ibragimov, I.; Idarraga, J.; Ikegami, Y.; Ince, T.; Ishmukhametov, R.; Izen, J.M.; Janoška, Z.; Janssen, J.; Jansen, L.; Jeanty, L.; Jensen, F.; Jentzsch, J.; Jezequel, S.; Joseph, J.; Kagan, H.; Kagan, M.; Karagounis, M.; Kass, R.; Kastanas, A.; Kenney, C.; Kersten, S.; Kind, P.; Klein, M.; Klingenberg, R.; Kluit, R.; Kocian, M.; Koffeman, E.; Korchak, O.; Korolkov, I.; Kostyukhina-Visoven, I.; Kovalenko, S.; Kretz, M.; Krieger, N.; Krüger, H.; Kruth, A.; Kugel, A.; Kuykendall, W.; La Rosa, A.; Lai, C.; Lantzsch, K.; Lapoire, C.; Laporte, D.; Lari, T.; Latorre, S.; Leyton, M.; Lindquist, B.; Looper, K.; Lopez, I.; Lounis, A.; Lu, Y.; Lubatti, H.J.; Maeland, S.; Maier, A.; Mallik, U.; Manca, F.; Mandelli, B.; Mandić, I.; Marchand, D.; Marchiori, G.; Marx, M.; Massol, N.; Mättig, P.; Mayer, J.; Mc Goldrick, G.; Mekkaoui, A.; Menouni, M.; Menu, J.; Meroni, C.; Mesa, J.; Michal, S.; Miglioranzi, S.; Mikuž, M.; Miucci, A.; Mochizuki, K.; Monti, M.; Moore, J.; Morettini, P.; Morley, A.; Moss, J.; Muenstermann, D.; Murray, P.; Nakamura, K.; Nellist, C.; Nelson, D.; Nessi, M.; Nisius, R.; Nordberg, M.; Nuiry, F.; Obermann, T.; Ockenfels, W.; Oide, H.; Oriunno, M.; Ould-Saada, F.; Padilla, C.; Pangaud, P.; Parker, S.; Pelleriti, G.; Pernegger, H.; Piacquadio, G.; Picazio, A.; Pohl, D.; Polini, A.; Pons, X.; Popule, J.; Portell Bueso, X.; Potamianos, K.; Povoli, M.; Puldon, D.; Pylypchenko, Y.; Quadt, A.; Quayle, B.; Rarbi, F.; Ragusa, F.; Rambure, T.; Richards, E.; Riegel, C.; Ristic, B.; Rivière, F.; Rizatdinova, F.; Rø hne, O.; Rossi, C.; Rossi, L.P.; Rovani, A.; Rozanov, A.; Rubinskiy, I.; Rudolph, M.S.; Rummier, A.; Ruscino, E.; Sabatini, F.; Salek, D.; Salzburger, A.; Sandaker, H.; Sannino, M.; Sanny, B.; Scanlon, T.; Schipper, J.; Schmidt, U.; Schneider, B.; Schorlemmer, A.; Schroer, N.; Schwemling, P.; Sciuccati, A.; Seidel, S.; Seiden, A.; Šícho, P.; Skubic, P.; Sloboda, M.; Smith, D.S.; Smith, M.; Sood, A.; Spencer, E.; Stramaglia, M.; Strauss, M.; Stucci, S.; Stugu, B.; Stupak, J.; Styles, N.; Su, D.; Takubo, Y.; Tassan, J.; Teng, P.; Teixeira, A.; Terzo, S.; Therry, X.; Todorov, T.; Tomášek, M.; Toms, K.; Travaglini, R.; Trischuk, W.; Troncon, C.; Troska, G.; Tsiskaridze, S.; Tsurin, I.; Tsybychev, D.; Unno, Y.; Vacavant, L.; Verlaat, B.; Vigeolas, E.; Vogt, M.; Vrba, V.; Vuillermet, R.; Wagner, W.; Walkowiak, W.; Wang, R.; Watts, S.; Weber, M.S.; Weber, M.; Weingarten, J.; Welch, S.; Wenig, S.; Wensing, M.; Wermes, N.; Wittig, T.; Wittgen, M.; Yildizkaya, T.; Yang, Y.; Yao, W.; Yi, Y.; Zaman, A.; Zaidan, R.; Zeitnitz, C.; Ziolkowski, M.; Zivkovic, V.; Zoccoli, A.; Zwalinski, L.

    2018-05-16

    During the shutdown of the CERN Large Hadron Collider in 2013-2014, an additional pixel layer was installed between the existing Pixel detector of the ATLAS experiment and a new, smaller radius beam pipe. The motivation for this new pixel layer, the Insertable B-Layer (IBL), was to maintain or improve the robustness and performance of the ATLAS tracking system, given the higher instantaneous and integrated luminosities realised following the shutdown. Because of the extreme radiation and collision rate environment, several new radiation-tolerant sensor and electronic technologies were utilised for this layer. This paper reports on the IBL construction and integration prior to its operation in the ATLAS detector.

  8. Seasonal variability of mixed layer in the central Arabian Sea and its implication on nutrients and primary productivity

    Digital Repository Service at National Institute of Oceanography (India)

    PrasannaKumar, S.; Narvekar, J.

    -1 Seasonal variability of mixed layer in the central Arabian Sea and its implication on nutrients and primary productivity S. Prasanna Kumar and Jayu Narvekar National Institute of Oceanography, Dona Paula, Goa-403 004, India... on a 2? x 4? grids up to a depth of 500m. Monthly mean temperature and salinity data were used to calculate the sigma-t values (UNESCO, 1981). We also used nitrate, chlorophyll a and primary productivity data in the upper 120m water column...

  9. Using egg production data to quantify within-flock transmission of low pathogenic avian influenza virus in commercial layer chickens

    NARCIS (Netherlands)

    Gonzales, J.L.; Elbers, A.R.W.; Goot, van der J.A.; Bontje, D.M.; Koch, G.; Wit, de J.J.; Stegeman, J.A.

    2012-01-01

    Even though low pathogenic avian influenza viruses (LPAIv) affect the poultry industry of several countries in the world, information about their transmission characteristics in poultry is sparse. Outbreak reports of LPAIv in layer chickens have described drops in egg production that appear to be

  10. The distribution of nitrogen and phosphorus in forest floor layers of oak-hickory forests of varying productivity

    Science.gov (United States)

    Karyn S. Rodkey; Donald J. Kaczmarek; Phillip E. Pope

    1995-01-01

    The forest floor plays a major role in the storage and recycling of nutrients which, in turn, are important in maintaining the growth and productivity of forest ecosystems. The development of forest floor organic layers as influenced by litter quality and site quality is unclear. Previous studies in this lab have shown that the size and distribution of available...

  11. Shifting stream planform state decreases stream productivity yet increases riparian animal production

    Science.gov (United States)

    Venarsky, Michael P.; Walters, David M.; Hall, Robert O.; Livers, Bridget; Wohl, Ellen

    2018-01-01

    In the Colorado Front Range (USA), disturbance history dictates stream planform. Undisturbed, old-growth streams have multiple channels and large amounts of wood and depositional habitat. Disturbed streams (wildfires and logging tested how these opposing stream states influenced organic matter, benthic macroinvertebrate secondary production, emerging aquatic insect flux, and riparian spider biomass. Organic matter and macroinvertebrate production did not differ among sites per unit area (m−2), but values were 2 ×–21 × higher in undisturbed reaches per unit of stream valley (m−1 valley) because total stream area was higher in undisturbed reaches. Insect emergence was similar among streams at the per unit area and per unit of stream valley. However, rescaling insect emergence to per meter of stream bank showed that the emerging insect biomass reaching the stream bank was lower in undisturbed sites because multi-channel reaches had 3 × more stream bank than single-channel reaches. Riparian spider biomass followed the same pattern as emerging aquatic insects, and we attribute this to bottom-up limitation caused by the multi-channeled undisturbed sites diluting prey quantity (emerging insects) reaching the stream bank (riparian spider habitat). These results show that historic landscape disturbances continue to influence stream and riparian communities in the Colorado Front Range. However, these legacy effects are only weakly influencing habitat-specific function and instead are primarily influencing stream–riparian community productivity by dictating both stream planform (total stream area, total stream bank length) and the proportional distribution of specific habitat types (pools vs riffles).

  12. Shifting stream planform state decreases stream productivity yet increases riparian animal production

    Science.gov (United States)

    Venarsky, Michael P.; Walters, David M.; Hall, Robert O.; Livers, Bridget; Wohl, Ellen

    2018-01-01

    In the Colorado Front Range (USA), disturbance history dictates stream planform. Undisturbed, old-growth streams have multiple channels and large amounts of wood and depositional habitat. Disturbed streams (wildfires and logging production, emerging aquatic insect flux, and riparian spider biomass. Organic matter and macroinvertebrate production did not differ among sites per unit area (m−2), but values were 2 ×–21 × higher in undisturbed reaches per unit of stream valley (m−1 valley) because total stream area was higher in undisturbed reaches. Insect emergence was similar among streams at the per unit area and per unit of stream valley. However, rescaling insect emergence to per meter of stream bank showed that the emerging insect biomass reaching the stream bank was lower in undisturbed sites because multi-channel reaches had 3 × more stream bank than single-channel reaches. Riparian spider biomass followed the same pattern as emerging aquatic insects, and we attribute this to bottom-up limitation caused by the multi-channeled undisturbed sites diluting prey quantity (emerging insects) reaching the stream bank (riparian spider habitat). These results show that historic landscape disturbances continue to influence stream and riparian communities in the Colorado Front Range. However, these legacy effects are only weakly influencing habitat-specific function and instead are primarily influencing stream–riparian community productivity by dictating both stream planform (total stream area, total stream bank length) and the proportional distribution of specific habitat types (pools vs riffles).

  13. Timing is everything: early degradation of abscission layer is associated with increased seed shattering in U.S. weedy rice

    Directory of Open Access Journals (Sweden)

    Hepler Peter K

    2011-01-01

    Full Text Available Abstract Background Seed shattering, or shedding, is an important fitness trait for wild and weedy grasses. U.S. weedy rice (Oryza sativa is a highly shattering weed, thought to have evolved from non-shattering cultivated ancestors. All U.S. weedy rice individuals examined to date contain a mutation in the sh4 locus associated with loss of shattering during rice domestication. Weedy individuals also share the shattering trait with wild rice, but not the ancestral shattering mutation at sh4; thus, how weedy rice reacquired the shattering phenotype is unknown. To establish the morphological basis of the parallel evolution of seed shattering in weedy rice and wild, we examined the abscission layer at the flower-pedicel junction in weedy individuals in comparison with wild and cultivated relatives. Results Consistent with previous work, shattering wild rice individuals possess clear, defined abscission layers at flowering, whereas non-shattering cultivated rice individuals do not. Shattering weedy rice from two separately evolved populations in the U.S. (SH and BHA show patterns of abscission layer formation and degradation distinct from wild rice. Prior to flowering, the abscission layer has formed in all weedy individuals and by flowering it is already degrading. In contrast, wild O. rufipogon abscission layers have been shown not to degrade until after flowering has occurred. Conclusions Seed shattering in weedy rice involves the formation and degradation of an abscission layer in the flower-pedicel junction, as in wild Oryza, but is a developmentally different process from shattering in wild rice. Weedy rice abscission layers appear to break down earlier than wild abscission layers. The timing of weedy abscission layer degradation suggests that unidentified regulatory genes may play a critical role in the reacquisition of shattering in weedy rice, and sheds light on the morphological basis of parallel evolution for shattering in weedy and wild

  14. The Utilization of Fungi and Their Products to Increase Livestock Production

    Directory of Open Access Journals (Sweden)

    Riza Zainuddin Ahmad

    2011-06-01

    Full Text Available Fungi as part of eukaryotic organisms play an important role for livestock. Some fungi are detrimental because they cause animal diseases, and some fungi are beneficial because they can improve animal productivity. The use of fungi that benefit from starting he has done as agents of biological control and to be as probiotics.Within the fungi, the use of simple technologies to high level degree for the benefit of cattle is developed. This paper describes some fungi that are beneficial and direction and suggestion to develop research on veterinary micology in Indonesia.

  15. Quantized vortex pair production in 4He films as a boundary-layer problem

    International Nuclear Information System (INIS)

    McCauley, J.L. Jr.

    1979-01-01

    The author shows that the idea of a boundary layer for discrete vortices arises naturally from the equation of motion for the probability distribution of an interacting vortex pair. In contrast with classical hydrodynamics, this boundary layer is of statistical origin, and the method leads to a scaling law for the exact dissociation rate of a bound vortex pair. (Auth.)

  16. The impact of increased natural background of soil on the animal production of ruminants in the region of Livno

    International Nuclear Information System (INIS)

    Gradaščević, N.; Saračević, L.; Samek, D.; Mihalj, A.

    2009-01-01

    In this paper, the impact of increased levels of uranium and radium in soil on the levels of activity and radiation-hygienic validity of animal products of ruminants was investigated. Region around Livno town is placed on coal layer with the increased levels of uranium and radium compared with other coals used in Bosnia and Herzegovina. As a result of mixing between coal matrix and soil, increased value of average absorbed dose rate at 1 m above the ground (144 nGy/h) was measured. The highest average value of 238U and 226Ra in the samples of animal products of ruminants was measured in the samples of sheep cheese (0.070 Bq/kg for 238U and 0.207 Bq/kg for 226Ra). The levels of these two radionuclides in the rest of animal product of ruminants were approximately similar and ranged 0.016–0.046 Bq/kg for 238U and 0.028–0.080 Bq/kg for 226Ra. Levels of 40K were in the range of average values for animal products (31.2–86.4 Bq/kg). Calculated annual effective dose by ingestion of the animal products of ruminants were approximately 0.064 mSv with the highest dose contribution of 40K (96.4%). On the base of obtained results, animal products of ruminants produced in observed region, can be considered as valid for human consumption from radiation- hygienic aspect

  17. On some peculiarities of production of ionospheric equatorial bubbles in zones with increased recombination

    International Nuclear Information System (INIS)

    Vepreva, M.N.; Sazonov, S.V.

    1991-01-01

    Numerical study of dynamics of electromagnetic disturbances of equatorial ionosphere F region which are longitudinal ones relative to B geomagnetic field and occur due to Rayleigh-Taylor and gradient-drift instability activity in zones with increased recombination, is conducted. Arbitrary initial disturbance is determined to be delivered mainly into the first space mode of resonator formed by B force line plunge in high-conducting E layer. Oscillation condition is studied

  18. Dual Layer Monolith ATR of Pyrolysis Oil for Distributed Synthesis Gas Production

    Energy Technology Data Exchange (ETDEWEB)

    Lawal, Adeniyi [Stevens Institute of Technology, Castle Point Hoboken NJ 07030

    2012-09-29

    We have successfully demonstrated a novel reactor technology, based on BASF dual layer monolith catalyst, for miniaturizing the autothermal reforming of pyrolysis oil to syngas, the second and most critical of the three steps for thermochemically converting biomass waste to liquid transportation fuel. The technology was applied to aged as well as fresh samples of pyrolysis oil derived from five different biomass feedstocks, namely switch-grass, sawdust, hardwood/softwood, golden rod and maple. Optimization of process conditions in conjunction with innovative reactor system design enabled the minimization of carbon deposit and control of the H2/CO ratio of the product gas. A comprehensive techno-economic analysis of the integrated process using in part, experimental data from the project, indicates (1) net energy recovery of 49% accounting for all losses and external energy input, (2) weight of diesel oil produced as a percent of the biomass to be ~14%, and (3) for a demonstration size biomass to Fischer-Tropsch liquid plant of ~ 2000 daily barrels of diesel, the price of the diesel produced is ~$3.30 per gallon, ex. tax. However, the extension of catalyst life is critical to the realization of the projected economics. Catalyst deactivation was observed and the modes of deactivation, both reversible and irreversible were identified. An effective catalyst regeneration strategy was successfully demonstrated for reversible catalyst deactivation while a catalyst preservation strategy was proposed for preventing irreversible catalyst deactivation. Future work should therefore be focused on extending the catalyst life, and a successful demonstration of an extended (> 500 on-stream hours) catalyst life would affirm the commercial viability of the process.

  19. Manufacturing of curd products of increased biological value for the elderly from dried components.

    Science.gov (United States)

    Zabodalova, Ludmila A; Belozerova, Maria S; Evstigneeva, Tatiana N

    2018-01-01

    In recent years, the number of elderly people has increased, and the diseases that arise in old age are associated, amongst other factors, with malnutrition. In the elderly, the need for primary nutrients and energy changes, so the development of food products intended for this particular group of people is becom- ing increasingly important. The purpose of this research is to work out the composition of and technology for producing low-fat curd products from raw milk and vegetable components. The developed products can be used for their gerodietetic properties, because nutritional and energy needs in the elderly were taken into account when designing the product. The curd product was manufactured from skimmed dried milk (SDM), soy isolate protein (SIP) and spelt grain. Optimal conditions for the recombination of SIP were determined. The influence of mass fraction of SIP on the properties of the clot and the end product was studied. The degree of dispersion of the grain component was determined, from the organoleptic evaluation of samples of the mixture, and the optimum method of addition was chosen. The method of adding cooked spelt into the clot after pressing was chosen. Harrington’s generalized desirability function was used for the calculation of the optimum mass frac- tion of the grain component in the end product. The formulation and technology for a curd product based on dry ingredients were determined. The amino acid composition and content of essential components in the developed product were determined, and the biological and nutritional value were calculated. The use of dry ingredients for the production of a curd product makes it possible to manufac- ture the product in the absence of raw milk. The formulation of the product is designed taking into account the needs of the body in old age. The incorporation of spelt increases the biological value of the curd product to 81.5%.

  20. Release of intracellular Calcium increase production of mitochondrial reactive oxygen species in renal distal epithelial cells

    DEFF Research Database (Denmark)

    Bjerregaard, Henning F.

    peroxide (H2O2) has traditionally been regarded as toxic by-products of aerobic metabolism. However, recent findings indicate that H2O2 act as a signalling molecule. The aim of the present study was to monitor, in real time, the rates of ROS generation in order to directly determine their production......Release of intracellular Calcium increase production of mitochondrial reactive oxygen species in renal distal epithelial cells. Henning F. Bjerregaard, Roskilde University, Department of Science, Systems and Models , 4000 Roskilde, Denmark. HFB@ RUC.DK Reactive oxygen species (ROS) like, hydrogen...... to G-protein stimulation of phospholipase C and release of inositol -3 phosphate. Cd (0.4 mM) treatment of A6 cells enhanced the ROS production after one minutes incubation. The production rate was constant for at least 10 to 20 min. Experiments showed that the Cd induced increase in ROS production...

  1. Agricultural production - Phase 2. Indonesia. Methods for increasing ruminant production from available feed resources in Indonesia - Nutrition-reproduction interactions

    International Nuclear Information System (INIS)

    Entwistle, K.W.

    1992-01-01

    Within the project ''Application of Isotopes and radiation to increasing agricultural production'' a mission was spent in Indonesia. This travel report provides details on the progress of studies on the effects of urea-molasses block food supplements on growth and milk production in cattle, sheep and goats and on reproduction in goats. Also discussed is the use of iodine-125 radioimmunoassay procedures to monitor progesterone levels. 4 tabs

  2. Effect of Dietary Marine Microalgae ( Powder on Egg Production, Blood Lipid Profiles, Egg Quality, and Fatty Acid Composition of Egg Yolk in Layers

    Directory of Open Access Journals (Sweden)

    J. H. Park

    2015-03-01

    Full Text Available Two hundred and sixteen Institut de Sélection Animale (ISA brown layers (40 wks of age were studied for 6 wks to examine the effect of microalgae powder (MAP on egg production, egg quality, blood lipid profile, and fatty acid concentration of egg yolk. Dietary treatments were as follows: i CON (basal diet, ii 0.5% MAP (CON+0.5% Schizochytrium powder, and iii 1.0% MAP (CON+1.0% Schizochytrium powder. From 44 to 46 wks, egg production was higher in 1.0% MAP treatment than in control treatment (linear, p = 0.034; however, there was no difference on the egg production from 40 to 43 wks (p>0.05. Serum triglyceride and total cholesterol were significantly reduced in the groups fed with MAP, compared to those in groups fed with control diets (Quadratic, p = 0.034 and p = 0.039, respectively. Inclusion of 0.5% MAP in the diet of layers improved egg yolk color, compared with hens fed with basal diet at 46 wks (quadratic, p = 0.044. Eggshell thickness was linearly increased in MAP-fed treatments at 46th wk (p<0.05. Concentration of yolk docosahexaenoic acid (DHA; C22:6n-3 was increased in treatment groups fed with MAP (linear, p<0.05. The n-6 fatty acids, n-6/n-3 fatty acid, and unsaturated fatty acid/saturated fatty acid were decreased in treatment groups fed with MAP (linear, p<0.05. These results suggest that MAP improved the egg production and egg quality, and may affect serum lipid metabolites in the layers. In addition, MAP increases yolk DHA levels, and deceases n-6/n-3 fatty acid ratio.

  3. A review on the challenges for the increased production of oilseeds ...

    African Journals Online (AJOL)

    This paper presents the trends of production, utilization and export of oilseeds and import of vegetable oils; available technologies and the prospects of increasing oilseeds production in Ethiopia. The oilseed industry is faced with enormous and multidimensional challenges that brought both treats and opportunities.

  4. A participatory and integrative approach to increase productivity and comfort in assembly

    NARCIS (Netherlands)

    Looze, M.P. de; Rhijn, G. van; Tuinzaad, B.; Deursen, J. van

    2000-01-01

    Manufacturers of manually assembled products are more and more forced to improve the flow of assembly orders together with a more efficient employment, in order to meet increasing demands on short delivery times, high product variety, good quality and low manufacturing costs. At the same time, the

  5. Assessing options to increase water productivity in irrigated river basins using remote sensing and modelling tools

    NARCIS (Netherlands)

    Dam, van J.C.; Singh, R.; Bessembinder, J.J.E.; Leffelaar, P.A.; Bastiaanssen, W.G.M.; Jhorar, R.K.; Kroes, J.G.; Droogers, P.

    2006-01-01

    In regions where water is more scarce than land, the water productivity concept (e.g. crop yield per unit of water utilized) provides a useful framework to analyse crop production increase or water savings in irrigated agriculture. Generic crop and soil models were applied at field and regional

  6. Increasing production yield of tyrosine and mevalonate through inhibition of biomass formation

    DEFF Research Database (Denmark)

    Li, Songyuan; Jendresen, Christian Bille; Nielsen, Alex Toftgaard

    2016-01-01

    , in particular, resulted in an increase in mass yield of mevalonate and tyrosine by 80% and 50%, respectively. By tracking production and biomass concentrations, it was observed that the production was maintained for more than 10 h after inhibition of cell growth, despite cell maintenance requirements...

  7. Examining the impacts of increased corn production on groundwater quality using a coupled modeling system

    Science.gov (United States)

    This study demonstrates the value of a coupled chemical transport modeling system for investigating groundwater nitrate contamination responses associated with nitrogen (N) fertilizer application and increased corn production. The coupled Community Multiscale Air Quality Bidirect...

  8. Methods for increasing production of 3-methyl-2-butenol using fusion proteins

    Energy Technology Data Exchange (ETDEWEB)

    Chou, Howard; Keasling, Jay D.

    2017-04-25

    The present invention relates to methods and compositions for increasing production of 3-methyl-2-butenol in a de novo synthetic pathway in a genetically modified host cell using isopentenyl disphosphate (IPP) as a substrate.

  9. Examining the impacts of increased corn production on groundwater quality using a coupled modeling system

    Data.gov (United States)

    U.S. Environmental Protection Agency — This dataset was used to create graphics associated with manuscript: Garcia et al., Examining the impacts of increased corn production on groundwater quality using a...

  10. Atomic Layer Deposition to Enable the Production, Optimization and Protection of Spaceflight Hardware

    Data.gov (United States)

    National Aeronautics and Space Administration — Atomic Layer Deposition (ALD) a cost effective nano-manufacturing technique allows for the conformal coating of substrates with atomic control in a benign...

  11. Atomic Layer Deposition to Enable the Production, Optimization and Protection of Spaceflight Hardware Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Atomic Layer Deposition (ALD) a cost effective nano-manufacturing technique allows for the conformal coating of substrates with atomic control in a benign...

  12. Investigation of the boundary layer during the transition from volume to surface dominated H- production at the BATMAN test facility

    Science.gov (United States)

    Wimmer, C.; Schiesko, L.; Fantz, U.

    2016-02-01

    BATMAN (Bavarian Test Machine for Negative ions) is a test facility equipped with a 1/8 scale H- source for the ITER heating neutral beam injection. Several diagnostics in the boundary layer close to the plasma grid (first grid of the accelerator system) followed the transition from volume to surface dominated H- production starting with a Cs-free, cleaned source and subsequent evaporation of caesium, while the source has been operated at ITER relevant pressure of 0.3 Pa: Langmuir probes are used to determine the plasma potential, optical emission spectroscopy is used to follow the caesiation process, and cavity ring-down spectroscopy allows for the measurement of the H- density. The influence on the plasma during the transition from an electron-ion plasma towards an ion-ion plasma, in which negative hydrogen ions become the dominant negatively charged particle species, is seen in a strong increase of the H- density combined with a reduction of the plasma potential. A clear correlation of the extracted current densities (jH-, je) exists with the Cs emission.

  13. Investigation of the boundary layer during the transition from volume to surface dominated H⁻ production at the BATMAN test facility.

    Science.gov (United States)

    Wimmer, C; Schiesko, L; Fantz, U

    2016-02-01

    BATMAN (Bavarian Test Machine for Negative ions) is a test facility equipped with a 18 scale H(-) source for the ITER heating neutral beam injection. Several diagnostics in the boundary layer close to the plasma grid (first grid of the accelerator system) followed the transition from volume to surface dominated H(-) production starting with a Cs-free, cleaned source and subsequent evaporation of caesium, while the source has been operated at ITER relevant pressure of 0.3 Pa: Langmuir probes are used to determine the plasma potential, optical emission spectroscopy is used to follow the caesiation process, and cavity ring-down spectroscopy allows for the measurement of the H(-) density. The influence on the plasma during the transition from an electron-ion plasma towards an ion-ion plasma, in which negative hydrogen ions become the dominant negatively charged particle species, is seen in a strong increase of the H(-) density combined with a reduction of the plasma potential. A clear correlation of the extracted current densities (j(H(-)), j(e)) exists with the Cs emission.

  14. Hydrogen peroxide production is not primarily increased in human myotubes established from type 2 diabetic subjects

    DEFF Research Database (Denmark)

    Minet, A D; Gaster, M

    2011-01-01

    Increased oxidative stress and mitochondrial dysfunction have been implicated in the development of insulin resistance in type 2 diabetes. To date, it is unknown whether increased mitochondrial reactive oxygen species (ROS) production in skeletal muscle from patients with type 2 diabetes is prima......Increased oxidative stress and mitochondrial dysfunction have been implicated in the development of insulin resistance in type 2 diabetes. To date, it is unknown whether increased mitochondrial reactive oxygen species (ROS) production in skeletal muscle from patients with type 2 diabetes...

  15. Applying Lean Techniques to Reduce Intravenous Waste Through Premixed Solutions and Increasing Production Frequency.

    Science.gov (United States)

    Lin, Alex C; Penm, Jonathan; Ivey, Marianne F; Deng, Yihong; Commins, Monica

    This study aims to use lean techniques and evaluate the impact of increasing the use of premixed IV solutions and increased IV production frequency on IV waste. Study was conducted at a tertiary hospital pharmacy department in three phases. Phase I included evaluation of IV waste when IV production occurred three times a day and eight premixed IV products were used. Phase II increased the number of premixed IV products to 16. Phase III then increased IV production to five times a day. During Phase I, an estimate of 2,673 IV doses were wasted monthly, accounting for 6.14% of overall IV doses. This accounted for 688 L that cost $60,135. During Phase II, the average monthly IV wastage reduced significantly to 1,069 doses (2.84%), accounting for 447 L and $34,003. During Phase III, the average monthly IV wastage was further decreased to 675 doses (1.69%), accounting for 78 L and $3,431. Hence, a potential annual saving of $449,208 could result from these changes. IV waste was reduced through the increased use of premixed solutions and increasing IV production frequency.

  16. Increasing meat product functionality by the addition of milled flaxseed Linum usitatissimum.

    Science.gov (United States)

    Zając, Marzena; Kulawik, Piotr; Tkaczewska, Joanna; Migdał, Władysław; Pustkowiak, Henryk

    2017-07-01

    Functional meat products are still rare on the market because it is difficult to incorporate new ingredients and obtain both a healthy and acceptable product. Flaxseed is known for its beneficial properties and, in the present study, it was used as an ingredient in the production of homogenised and liver sausages (0%, 5% and 10% flaxseed addition). Homogenised and liver sausages with the addition of 5% flaxseed were given the highest scores by the consumers, although the colour changed with the addition of flaxseed. The spreadability and hardness of the liver sausages increased with the addition of flaxseed, whereas the texture of homogenised sausages did not change. Addition of flaxseed improved the fatty acids profile from a health point of view for both products, as a result of increasing n-3 fatty acids and overall polyunsaturated fatty acids content. Values for thiobarbituric acid reactive substances were higher in products with flaxseed and were observed to increase during storage. The results of the present study indicate that it is possible to obtain products that are acceptable by consumers and, at the same time, are more healthy. A high level of α-linolenic acid in the sausages at a level of addition of 5% allows the product to be labelled with information regarding their high omega-3 fatty acid content. However, those products are more susceptible to oxidation. © 2016 Society of Chemical Industry. © 2016 Society of Chemical Industry.

  17. Do large mergers increase or decrease the productivity of pharmaceutical R&D?

    Science.gov (United States)

    Ringel, Michael S; Choy, Michael K

    2017-12-01

    There is current uncertainty regarding the effects of mergers on pharmaceutical R&D productivity, with various mechanisms reported by which mergers could either help or harm R&D, and mixed empirical findings in prior analyses. Here, we present an analysis that is novel in several ways: we use downstream measures of R&D productivity, account for both inputs and outputs in our calculations, and use a self-controlled design. We find that recent large pharmaceutical mergers are associated with statistically significant increases in R&D productivity. These results are perhaps not surprising in light of the broader literature on R&D productivity that points to two factors as instrumental in driving higher R&D productivity (depth of scientific information, and objectivity of decision-making based on that information), both of which could be expected to increase because of a merger. Copyright © 2017 Elsevier Ltd. All rights reserved.

  18. Increasing plant density in eastern United States broccoli production systems to maximize marketable head yields

    Science.gov (United States)

    Increased demand for fresh market broccoli (Brassica oleracea L. var. italica) has led to increased production along the eastern seaboard of the United States. Maximizing broccoli yields is a primary concern for quickly expanding eastern commercial markets. Thus, a plant density study was carried ...

  19. Increased production of biogas from cowdung by adding other agricultural waste materials

    Energy Technology Data Exchange (ETDEWEB)

    Laura, M D; Idnani, M A

    1971-04-01

    It was found that the addition of nitrogenous materials, such as casein, urea or urine, increased the extent of decomposition of cowdung, resulting in higher gas production. The effect appears to be due to the maintenance of pH 7 during fermentation. With the addition of urea or CaCO/sub 3/, materials such as dry leaves and cane sugar have yielded higher proportions of methane in the gas mixtures and these additions also increased the rate of gas production by promoting anaerobic conditions in the medium. Addition of cellulose also increased the rate but the gas mixture obtained had a lower methane content.

  20. A method for the densification of ceramic layers, especially ceramic layers within solid oxide cell (SOC) technology, and products obtained by the method

    DEFF Research Database (Denmark)

    2013-01-01

    A ceramic layer, especially for use in solid oxide cell (SOC) technology, is densified in a method comprising (a) providing a multilayer system by depositing the porous ceramic layer, which is to be densified, onto the selected system of ceramic layers on a support, (b) pre-sintering the resulting......(s) in the porous layer surface and (e) performing a thermal treatment at a temperature T2, where T2 > ?1, to obtain densification of and grain growth in the porous layer formed in step (b). The method makes it possible to obtain dense ceramic layers at temperatures, which are compatible with the other materials...... present in a ceramic multilayer system....

  1. Inventions in the nanotechnological area considerably increase wear- and chemical resistance of construction products

    Directory of Open Access Journals (Sweden)

    VLASOV Vladimir Alexeevich

    2014-08-01

    Full Text Available The invention «Reinforced flaked element made of natural or conglomerate stone and its multilayer protective coating (RU 2520193» is referred to construction materials. Reinforced flaked element made of natural or conglomerate stone consists of: natural or conglomerate materials as the basis; multilayer coating which protects the mentioned basis from chemical substances and wearing mechanical factors influencing on this element where the multilayer coating includes at least three layers formed by one or many film-forming compositions which comprise top layer with scratch-resistant nanoparticles and encircled with polyester, melamine, phenolic, acryl or epoxy resin (or any combination of them which provides protection against scratches; damper intermediate layer made of epoxy and/or acryl resin which provides impact resistant; lower layer adjoining to the basis and containing particles of Al2O3 or silicon carbide plus acryl polymer and providing resistance to abrasive wear. Technical result is increased wear- and chemical resistance of flaked elements from natural or conglomerate materials. The invention «Fine organic suspension of carbon metal-containing nanostructures and the method to produce it (RU 2515858» is referred to the area of physical and colloid chemistry and can be used to obtain polymer compositions. Fine organic suspension of carbon metal-containing nanostructures is produced by interaction between nanostructures and polyethylenepolyamine. At first the powder of carbon metalcontaining nanostructures (which are nanoparticles of 3d-metal such as copper, cobalt, nickel stabilized in carbon nanostructures is mechanically milled, then it is mechanically ground with polyethylenepolyamine introduced portionally unless and until the content of nanostructures is less 1 g/ml. The invention results in decreased power inputs as the obtained fine organic suspension of carbon and metal-containing nanostructures is able to recover due to

  2. Increasing beef production could lower greenhouse gas emissions in Brazil if decoupled from deforestation

    Science.gov (United States)

    de Oliveira Silva, R.; Barioni, L. G.; Hall, J. A. J.; Folegatti Matsuura, M.; Zanett Albertini, T.; Fernandes, F. A.; Moran, D.

    2016-05-01

    Recent debate about agricultural greenhouse gas emissions mitigation highlights trade-offs inherent in the way we produce and consume food, with increasing scrutiny on emissions-intensive livestock products. Although most research has focused on mitigation through improved productivity, systemic interactions resulting from reduced beef production at the regional level are still unexplored. A detailed optimization model of beef production encompassing pasture degradation and recovery processes, animal and deforestation emissions, soil organic carbon (SOC) dynamics and upstream life-cycle inventory was developed and parameterized for the Brazilian Cerrado. Economic return was maximized considering two alternative scenarios: decoupled livestock-deforestation (DLD), assuming baseline deforestation rates controlled by effective policy; and coupled livestock-deforestation (CLD), where shifting beef demand alters deforestation rates. In DLD, reduced consumption actually leads to less productive beef systems, associated with higher emissions intensities and total emissions, whereas increased production leads to more efficient systems with boosted SOC stocks, reducing both per kilogram and total emissions. Under CLD, increased production leads to 60% higher emissions than in DLD. The results indicate the extent to which deforestation control contributes to sustainable intensification in Cerrado beef systems, and how alternative life-cycle analytical approaches result in significantly different emission estimates.

  3. Local food in Iceland: identifying behavioral barriers to increased production and consumption

    Science.gov (United States)

    Ósk Halldórsdóttir, Þórhildur; Nicholas, Kimberly A.

    2016-11-01

    Increased production and consumption of local food may reduce the negative environmental, social, and economic impacts of industrialized and globalized food production. Here we examined potential barriers to increasing production and consumption of food produced in Iceland. First, we developed a new framework to address the behaviors of production and consumption simultaneously, to comprehensively analyze their potential barriers. We examined structural barriers by estimating the food production capacity of Iceland, and cultural and personal barriers through survey data on cultural norms and purchasing behavior from Matís, a research and development company. We found no structural barriers preventing Iceland from increasing production of local cereals, which would compliment current local production of meat and dairy and reduce reliance on imports, currently at 50% of the daily caloric intake. However, if food production became entirely local without changing the current mix of crops grown, there would be a 50% reduction in diversity (from 50 to 25 items in eight out of ten food categories). We did not identify any cultural barriers, as survey results demonstrated that consumers hold generally positive worldviews towards local food, with 88% satisfied with local food they had purchased. More than two-thirds of consumers regarded supporting the local farmer and considerations such as environmentally friendly production, fewer food miles, lower carbon footprint as important. However, they rated the local food they have access to as lower in meeting sustainability criteria, showing that they make justifications for not choosing local food in practice. This is a personal barrier to increased consumption of local food, and implies that marketing strategies and general knowledge connected to local food in Iceland might be improved. Although the results apply to the case of Iceland, the method of identifying behavioral barriers to change is applicable to other countries

  4. An Inventory of Methods for the Assessment of Additive Increased Addictiveness of Tobacco Products.

    Science.gov (United States)

    van de Nobelen, Suzanne; Kienhuis, Anne S; Talhout, Reinskje

    2016-07-01

    Cigarettes and other forms of tobacco contain the addictive drug nicotine. Other components, either naturally occurring in tobacco or additives that are intentionally added during the manufacturing process, may add to the addictiveness of tobacco products. As such, these components can make cigarette smokers more easily and heavily dependent.Efforts to regulate tobacco product dependence are emerging globally. Additives that increase tobacco dependence will be prohibited under the new European Tobacco Product Directive. This article provides guidelines and recommendations for developing a regulatory strategy for assessment of increase in tobacco dependence due to additives. Relevant scientific literature is summarized and criteria and experimental studies that can define increased dependence of tobacco products are described. Natural tobacco smoke is a very complex matrix of components, therefore analysis of the contribution of an additive or a combination of additives to the level of dependence on this product is challenging. We propose to combine different type of studies analyzing overall tobacco product dependence potential and the functioning of additives in relation to nicotine. By using a combination of techniques, changes associated with nicotine dependence such as behavioral, physiological, and neurochemical alterations can be examined to provide sufficient information.Research needs and knowledge gaps will be discussed and recommendations will be made to translate current knowledge into legislation. As such, this article aids in implementation of the Tobacco Product Directive, as well as help enable regulators and researchers worldwide to develop standards to reduce dependence on tobacco products. This article provides an overall view on how to assess tobacco product constituents for their potential contribution to use and dependence. It provides guidelines that help enable regulators worldwide to develop standards to reduce dependence on tobacco products

  5. Methylmercury bioaccumulation in stream food webs declines with increasing primary production

    Science.gov (United States)

    Walters, David; D.F. Raikow,; C.R. Hammerschmidt,; M.G. Mehling,; A. Kovach,; J.T. Oris,

    2015-01-01

    Opposing hypotheses posit that increasing primary productivity should result in either greater or lesser contaminant accumulation in stream food webs. We conducted an experiment to evaluate primary productivity effects on MeHg accumulation in stream consumers. We varied light for 16 artificial streams creating a productivity gradient (oxygen production =0.048–0.71 mg O2 L–1 d–1) among streams. Two-level food webs were established consisting of phytoplankton/filter feeding clam, periphyton/grazing snail, and leaves/shredding amphipod (Hyalella azteca). Phytoplankton and periphyton biomass, along with MeHg removal from the water column, increased significantly with productivity, but MeHg concentrations in these primary producers declined. Methylmercury concentrations in clams and snails also declined with productivity, and consumer concentrations were strongly correlated with MeHg concentrations in primary producers. Heterotroph biomass on leaves, MeHg in leaves, and MeHg in Hyalella were unrelated to stream productivity. Our results support the hypothesis that contaminant bioaccumulation declines with stream primary production via the mechanism of bloom dilution (MeHg burden per cell decreases in algal blooms), extending patterns of contaminant accumulation documented in lakes to lotic systems.

  6. Anthropogenic moisture production and its effect on boundary layer circulations over New York City

    International Nuclear Information System (INIS)

    Bornstein, R.D.; Tam, Y.T.

    1975-01-01

    A heat and moisture excess over New York City is shown to exist by the analysis of helicopter soundings of temperature and wet bulb depression. The magnitude of the temporal and spatial distribution of anthropogenic moisture emissions in New York City were estimated from fuel usage data. The URBMET urban boundary layer model was used to evaluate the effects on the dynamics of the urban boundary layer resulting from the observed urban moisture excess. Work is currently in progress which seeks to determine the fraction of the observed moisture excess over New York that is due to anthropogenic sources. (auth)

  7. THE INCREASED PRODUCTION OF OIL CITRONELLA IN THE VILLAGE CIMUNGKAL-SUMEDANG

    Directory of Open Access Journals (Sweden)

    Nugraha Nugraha

    2017-04-01

    Full Text Available Inability to fulfill the demand of consumers is becoming the major issues on citronella oil refinery in the village of Cimungkal Sumedang. This study was conducted to formulate alternative measures in order to increase the production of citronella oil distillates in the Cimungkal village. Mapping of the production process is done with Value Stream Mapping (VSM as a first step to determine the processing time (lead time of production and identify the waste that occurs, analyze the causes of the problems at the manufacturing level, and formulate remedial measures to increase the production of oil of citronella. The results show some activity in the production process of citronella oil which is a waste and should be minimized. By mapping, it can be seen that the lead time citronella oil refining initial amounted to 647 minutes or 10.78 hours. After repairs (Future State improvements Total lead time to 274 minutes. Value-added activity increased by 38.93%, non-value added decreased by 3.63%, and necessary but non-value added fell by 35.3%. The study also resulted in the formulation of strategies that can be done to increase the production of oil of citronella.

  8. Problems Analysis on Increasing Rice Production Through Food Estate Program in Bulungan Regency, North Kalimantan

    Science.gov (United States)

    Setyo, P.; Elly, J.

    2018-05-01

    To increase rice production in the Province of North Kalimantan, the provincial government has launched a Food Estate Program. The program is also a central government program in relation to government policies on food security. One of the food estate development areas is the Delta Kayan Food Estate of 50,000 hectares in Bulungan Regency, where about 30,000 hectares area is a tidal land with a very fertile alluvial soil type. This policy study aims to identify and analyze problems of increasing rice production through food estate development in North Kalimantan Province and formulate priority programs as recommendations for policy making in increasing rice production. The study has identified a number of problems of increasing rice production, such as land tenure, land suitability, water system, infrastructure, accessibility of production factors, institutional, and capacity of human resources. The Analytic Hierarchy Process was applied to develop priority programs, resulting in the three most important programs being water management, improving access to production factors, and improving the capacity of human resources. Action plans related to priority programs have also been identified.

  9. Evaluation of empowerment program to increase production capacity of fishery processing business in Semarang City, Indonesia

    Science.gov (United States)

    Swastawati, F.; Roessali, W.; Wijayanti, I.; Anggo, A. D.

    2018-01-01

    This study aims to evaluate the empowerment program to increase the production capacity of fishery product processing. Empowerment program was the implementation and utilization of science and technology in the area (IPTEKDA) LIPI Indonesia for Higher Education. Activity carried out in 2016 on fish processing industry “Lumintu Group”. Implementation of activities includes the transfer of technology to increase production capacity, business capital assistance in the form of production equipment, production assistance, and business management. This study uses qualitative, descriptive analysis, data collection with observation, interviews, and questionnaires. The results showed that the total number of active members was 24 people, 50% of the members specially cultivated the smoked fish that is the type of Catfish (Arius thalassinus) and Stingray (Dasyatis sp), while 45.83% of members processed boneless milkfish, and 4,17% produce salted fish. Increased average production scale of 31.82% in smoked fish business, 12.4% in boneless milkfish and 38.89% in salted fish business. Willingness to return capital in the good category, meaning that all members were able to carry out the schedule of relative payback on time. Approximately 83.3% of the group members felt that the program that followed had greatly assisted in increasing the scale of business but hoped to improve skills in terms of processing and marketing.

  10. Sorting cells of the microalga Chlorococcum littorale with increased triacylglycerol productivity.

    Science.gov (United States)

    Cabanelas, Iago Teles Dominguez; van der Zwart, Mathijs; Kleinegris, Dorinde M M; Wijffels, René H; Barbosa, Maria J

    2016-01-01

    Despite extensive research in the last decades, microalgae are still only economically feasible for high valued markets. Strain improvement is a strategy to increase productivities, hence reducing costs. In this work, we focus on microalgae selection: taking advantage of the natural biological variability of species to select variations based on desired characteristics. We focused on triacylglycerol (TAG), which have applications ranging from biodiesel to high-value omega-3 fatty-acids. Hence, we demonstrated a strategy to sort microalgae cells with increased TAG productivity. 1. We successfully identified sub-populations of cells with increased TAG productivity using Fluorescence assisted cell sorting (FACS). 2. We sequentially sorted cells after repeated cycles of N-starvation, resulting in five sorted populations (S1-S5). 3. The comparison between sorted and original populations showed that S5 had the highest TAG productivity [0.34 against 0.18 g l(-1) day(-1) (original), continuous light]. 4. Original and S5 were compared in lab-scale reactors under simulated summer conditions confirming the increased TAG productivity of S5 (0.4 against 0.2 g l(-1) day(-1)). Biomass composition analyses showed that S5 produced more biomass under N-starvation because of an increase only in TAG content and, flow cytometry showed that our selection removed cells with lower efficiency in producing TAGs. All combined, our results present a successful strategy to improve the TAG productivity of Chlorococcum littorale, without resourcing to genetic manipulation or random mutagenesis. Additionally, the improved TAG productivity of S5 was confirmed under simulated summer conditions, highlighting the industrial potential of S5 for microalgal TAG production.

  11. Production of quorum-sensing signals by bacteria in the coral mucus layer

    Science.gov (United States)

    Li, Jie; Kuang, Weiqi; Long, Lijuan; Zhang, Si

    2017-12-01

    Quorum sensing is an integral part of bacterial communication and interaction, but has not been well characterized in coral mucus microbiota. In this study, of 61 coral mucus isolates, five alphaproteobacteria and one Vibrio species were found to produce N-acyl homoserine lactone (AHL), a quorum-sensing signal in bacteria. Eight gammaproteobacteria isolates were found to produce autoinducer-2 (AI-2) quorum-sensing signals along with two actinobacteria of the genus Rothia. Coral mucus is rich in the antioxidant dimethylsulfoniopropionate (DMSP), the concentration of which has been found to increase under heat stress. Neither AHL nor AI-2 activity was induced by DMSP in those coral mucus isolates that did not initially produce quorum-sensing signals. However, the AI-2 activities of one Rothia isolate (SCSIO 13017) from coral mucus and of Vibrio shilonii (DSM 13774 isolated from a bleached coral) were found to increase in response to 5 μM DMSP but decreased in response to 50 μM DMSP for the first time. These findings suggest that the production of quorum-sensing signals in the coral mucus microbiota may play a role in structuring the surface microbial community as they respond to environmental stress.

  12. The unintended energy impacts of increased nitrate contamination from biofuels production.

    Science.gov (United States)

    Twomey, Kelly M; Stillwell, Ashlynn S; Webber, Michael E

    2010-01-01

    Increases in corn cultivation for biofuels production, due to the Energy Independence and Security Act of 2007, are likely to lead to increases in nitrate concentrations in both surface and groundwater resources in the United States. These increases might trigger the requirement for additional energy consumption for water treatment to remove the nitrates. While these increasing concentrations of nitrate might pose a human health concern, most water resources were found to be within current maximum contaminant level (MCL) limits of 10 mg L(-1) NO(3)-N. When water resources exceed this MCL, energy-intensive drinking water treatment is required to reduce nitrate levels below 10 mg L(-1). Based on prior estimates of water supplies currently exceeding the nitrate MCL, we calculate that advanced drinking water treatment might require an additional 2360 million kWh annually (for nitrate affected areas only)--a 2100% increase in energy requirements for water treatment in those same areas--to mitigate nitrate contamination and meet the MCL requirement. We predict that projected increases in nitrate contamination in water may impact the energy consumed in the water treatment sector, because of the convergence of several related trends: (1) increasing cornstarch-based ethanol production, (2) increasing nutrient loading in surface water and groundwater resources as a consequence of increased corn-based ethanol production, (3) additional drinking water sources that exceed the MCL for nitrate, and (4) potentially more stringent drinking water standards for nitrate.

  13. Improvements in crop water productivity increase water sustainability and food security—a global analysis

    International Nuclear Information System (INIS)

    Brauman, Kate A; Foley, Jonathan A; Siebert, Stefan

    2013-01-01

    Irrigation consumes more water than any other human activity, and thus the challenges of water sustainability and food security are closely linked. To evaluate how water resources are used for food production, we examined global patterns of water productivity—food produced (kcal) per unit of water (l) consumed. We document considerable variability in crop water productivity globally, not only across different climatic zones but also within climatic zones. The least water productive systems are disproportionate freshwater consumers. On precipitation-limited croplands, we found that ∼40% of water consumption goes to production of just 20% of food calories. Because in many cases crop water productivity is well below optimal levels, in many cases farmers have substantial opportunities to improve water productivity. To demonstrate the potential impact of management interventions, we calculated that raising crop water productivity in precipitation-limited regions to the 20th percentile of productivity would increase annual production on rainfed cropland by enough to provide food for an estimated 110 million people, and water consumption on irrigated cropland would be reduced enough to meet the annual domestic water demands of nearly 1.4 billion people. (letter)

  14. Increasing cocoa butter-like lipid production of Saccharomyces cerevisiae by expression of selected cocoa genes

    DEFF Research Database (Denmark)

    Wei, Yongjun; Gossing, Michael; Bergenholm, David

    2017-01-01

    for CB biosynthesis from the cocoa genome using a phylogenetic analysis approach. By expressing the selected cocoa genes in S. cerevisiae, we successfully increased total fatty acid production, TAG production and CBL production in some S. cerevisiae strains. The relative CBL content in three yeast...... higher level of CBL compared with the control strain. In summary, CBL production by S. cerevisiae were increased through expressing selected cocoa genes potentially involved in CB biosynthesis.......Cocoa butter (CB) extracted from cocoa beans mainly consists of three different kinds of triacylglycerols (TAGs), 1,3-dipalmitoyl-2-oleoyl-glycerol (POP, C16:0-C18:1-C16:0), 1-palmitoyl-3-stearoyl-2-oleoyl-glycerol(POS,C16:0C18:1-C18:0) and 1,3-distearoyl-2-oleoyl-glycerol (SOS, C18:0-C18:1-C18...

  15. Dissipation equals production in the log layer of wall-induced turbulence

    NARCIS (Netherlands)

    Brouwers, J.J.H.

    2007-01-01

    Asymptotic analysis is presented of the energy balance equations derived from statistically averagedNavier-Stokes equations pertinent to wall-induced turbulence. Attention is focused on the inertialsublayer, the region outside the viscous sublayer, and the buffer layer where the log-law for meanflow

  16. Photoelectrochemical performance of multi-layered BiOx–TiO2/Ti electrodes for degradation of phenol and production of molecular hydrogen in water

    International Nuclear Information System (INIS)

    Park, Hyunwoong; Bak, Ayoung; Ahn, Yong Yoon; Choi, Jina; Hoffmannn, Michael R.

    2012-01-01

    Highlights: ► We demonstrated that the electrocatalytic performance of BiO x –TiO 2 anodes for the degradation of aqueous phenol could be highly boosted by light irradiation. ► Although BiO x –TiO 2 anodes have been originally developed as the electrocatalytic anodes that operate in the absence of light by degeneratively doping Bi in TiO 2 , the presence of TiO 2 made them retain photoelectrocatalytic activity as well. ► Such dual functionality of BiO x –TiO 2 electrodes with high synergy effects may be directly used for water treatment with simultaneous hydrogen production from water. - Abstract: Multi-layered BiO x –TiO 2 electrodes were used for the oxidation of chemical contaminants coupled with the production of H 2 characterized by a synergistic enhancement. The BiO x –TiO 2 electrodes were composed of a mixed-metal oxide array involving an under layer of TaO x –IrO x , a middle layer of BiO x –SnO 2 , and a top layer of BiO x –TiO 2 deposited in a series on both sides of Ti foil. Cyclic voltammograms showed that the BiO x –TiO 2 electrodes had an electrocatalytic activity for oxidation of phenol that was enhanced by 70% under illumination with AM 1.5 light. When the BiO x –TiO 2 anode was coupled with a stainless steel cathode in a Na 2 SO 4 electrolyte with phenol and irradiated with UV light at an applied DC voltage, the anodic phenol oxidation rate and the cathodic H 2 production rates were enhanced by factors of four and three, respectively, as compared to the sum of each light irradiation and direct DC electrolysis. These synergistic effects depend on the specific electrode composition and decrease on TaO x –IrO x and BiO x –SnO 2 anodes in the absence of a top layer of BiO x –TiO 2 . These results indicate that the BiO x –TiO 2 layer functions as the key photo-electrocatalyst. The heavy doping level of Bi (25 mol%) in TiO 2 increases the electric conductivity of the parent TiO 2 .

  17. Harmonizing Biodiversity Conservation and Productivity in the Context of Increasing Demands on Landscapes

    Science.gov (United States)

    Seppelt, Ralf; Beckmann, Michael; Ceauşu, Silvia; Cord, Anna F.; Gerstner, Katharina; Gurevitch, Jessica; Kambach, Stephan; Klotz, Stefan; Mendenhall, Chase; Phillips, Helen R. P.; Powell, Kristin; Verburg, Peter H.; Verhagen, Willem; Winter, Marten; Newbold, Tim

    2016-01-01

    Abstract Biodiversity conservation and agricultural production are often seen as mutually exclusive objectives. Strategies for reconciling them are intensely debated. We argue that harmonization between biodiversity conservation and crop production can be improved by increasing our understanding of the underlying relationships between them. We provide a general conceptual framework that links biodiversity and agricultural production through the separate relationships between land use and biodiversity and between land use and production. Hypothesized relationships are derived by synthesizing existing empirical and theoretical ecological knowledge. The framework suggests nonlinear relationships caused by the multifaceted impacts of land use (composition, configuration, and intensity). We propose solutions for overcoming the apparently dichotomous aims of maximizing either biodiversity conservation or agricultural production and suggest new hypotheses that emerge from our proposed framework. PMID:29599534

  18. The role of artificial intelligence and expert systems in increasing STS operations productivity

    Science.gov (United States)

    Culbert, C.

    1985-01-01

    Artificial Intelligence (AI) is discussed. A number of the computer technologies pioneered in the AI world can make significant contributions to increasing STS operations productivity. Application of expert systems, natural language, speech recognition, and other key technologies can reduce manpower while raising productivity. Many aspects of STS support lend themselves to this type of automation. The artificial intelligence section of the mission planning and analysis division has developed a number of functioning prototype systems which demonstrate the potential gains of applying AI technology.

  19. Increased contribution of ultra-processed food products in the Brazilian diet (1987-2009).

    Science.gov (United States)

    Martins, Ana Paula Bortoletto; Levy, Renata Bertazzi; Claro, Rafael Moreira; Moubarac, Jean Claude; Monteiro, Carlos Augusto

    2013-08-01

    To establish temporal trends in household food and drink consumption in Brazil, taking into account the extent and purpose of its industrial processing. Data was obtained from Household Budget Surveys conducted in Brazil in 1987-1988, 1995-1996, 2002-2003 and 2008-2009. In all surveys, probabilistic samples of households in the metropolitan areas were studied and, for the last two surveys, the scope was national. The units of analysis were food purchases records of clusters of households. The purchased food items were divided according to the extent and purpose of their industrial processing into: 'in natura' or minimally processed foods, processed culinary ingredients and ready-to-consume, processed and ultra-processed food and drink products. The quantity of each item was converted into energy. For each survey, the daily availability of calories per capita and the caloric share of the food groups were estimated. For the national surveys, estimates were calculated by income quintiles. Temporal trends were assessed using linear regression models and difference of means tests. The caloric share of ready-to-consume products significantly increased between 2002-2003 and 2008-2009 (from 23.0% to 27.8% of total calories), mainly because of the increase in the consumption of ultra-processed products (20.8% to 25.4%). In the same period, there was a significant reduction in the caloric share of foods and culinary ingredients. The increase in the ultra-processed products caloric share occurred across all income quintiles. There was an uniform increase in the caloric share of ready-to-consume products in the metropolitan areas, mostly in place of ultra-processed products, accompanied by a decrease in the share of 'in natura' or minimally processed foods and culinary ingredients. The share of ultra-processed products significantly increased in the Brazilian diet, as seen in the metropolitan areas since the 1980s, and confirmed at a national level in the 2000s.

  20. Physiological and ecological effects of increasing temperature on fish production in lakes of Arctic Alaska

    Science.gov (United States)

    Carey, Michael P.; Zimmerman, Christian E.

    2014-01-01

    Lake ecosystems in the Arctic are changing rapidly due to climate warming. Lakes are sensitive integrators of climate-induced changes and prominent features across the Arctic landscape, especially in lowland permafrost regions such as the Arctic Coastal Plain of Alaska. Despite many studies on the implications of climate warming, how fish populations will respond to lake changes is uncertain for Arctic ecosystems. Least Cisco (Coregonus sardinella) is a bellwether for Arctic lakes as an important consumer and prey resource. To explore the consequences of climate warming, we used a bioenergetics model to simulate changes in Least Cisco production under future climate scenarios for lakes on the Arctic Coastal Plain. First, we used current temperatures to fit Least Cisco consumption to observed annual growth. We then estimated growth, holding food availability, and then feeding rate constant, for future projections of temperature. Projected warmer water temperatures resulted in reduced Least Cisco production, especially for larger size classes, when food availability was held constant. While holding feeding rate constant, production of Least Cisco increased under all future scenarios with progressively more growth in warmer temperatures. Higher variability occurred with longer projections of time mirroring the expanding uncertainty in climate predictions further into the future. In addition to direct temperature effects on Least Cisco growth, we also considered changes in lake ice phenology and prey resources for Least Cisco. A shorter period of ice cover resulted in increased production, similar to warming temperatures. Altering prey quality had a larger effect on fish production in summer than winter and increased relative growth of younger rather than older age classes of Least Cisco. Overall, we predicted increased production of Least Cisco due to climate warming in lakes of Arctic Alaska. Understanding the implications of increased production of Least Cisco to

  1. Increasing the quality and safety of meat products through high technology methods during their storage

    International Nuclear Information System (INIS)

    Miteva, D.; Nacheva, I.; Georgieva, L.

    2008-01-01

    The aim of this study was to increase the quality and safety of different meat products by applying two high technology methods – lyophilization and gamma-irradiation. Object of study were chicken, pork and beef meat products. The organoleptic, physicochemical and microbiological properties after lyophilization, irradiation with gamma-rays and during the preservation of the samples were studied. The results indicated that the application of the two original technologies for preservation could ensure qualitative and long-lasting preservation of meat products with excellently preserved taste and organoleptic properties

  2. Increasing crop production in Russia and Ukraine—regional and global impacts from intensification and recultivation

    Science.gov (United States)

    Deppermann, Andre; Balkovič, Juraj; Bundle, Sophie-Charlotte; Di Fulvio, Fulvio; Havlik, Petr; Leclère, David; Lesiv, Myroslava; Prishchepov, Alexander V.; Schepaschenko, Dmitry

    2018-02-01

    Russia and Ukraine are countries with relatively large untapped agricultural potentials, both in terms of abandoned agricultural land and substantial yield gaps. Here we present a comprehensive assessment of Russian and Ukrainian crop production potentials and we analyze possible impacts of their future utilization, on a regional as well as global scale. To this end, the total amount of available abandoned land and potential yields in Russia and Ukraine are estimated and explicitly implemented in an economic agricultural sector model. We find that cereal (barley, corn, and wheat) production in Russia and Ukraine could increase by up to 64% in 2030 to 267 million tons, compared to a baseline scenario. Oilseeds (rapeseed, soybean, and sunflower) production could increase by 84% to 50 million tons, respectively. In comparison to the baseline, common net exports of Ukraine and Russia could increase by up to 86.3 million tons of cereals and 18.9 million tons of oilseeds in 2030, representing 4% and 3.6% of the global production of these crops, respectively. Furthermore, we find that production potentials due to intensification are ten times larger than potentials due to recultivation of abandoned land. Consequently, we also find stronger impacts from intensification at the global scale. A utilization of crop production potentials in Russia and Ukraine could globally save up to 21 million hectares of cropland and reduce average global crop prices by more than 3%.

  3. A competitive trade-off limits the selective advantage of increased antibiotic production.

    Science.gov (United States)

    Gerardin, Ylaine; Springer, Michael; Kishony, Roy

    2016-09-26

    In structured environments, antibiotic-producing microorganisms can gain a selective advantage by inhibiting nearby competing species 1 . However, despite their genetic potential 2,3 , natural isolates often make only small amounts of antibiotics, and laboratory evolution can lead to loss rather than enhancement of antibiotic production 4 . Here, we show that, due to competition with antibiotic-resistant cheater cells, increased levels of antibiotic production can actually decrease the selective advantage to producers. Competing fluorescently labelled Escherichia coli colicin producers with non-producing resistant and sensitive strains on solid media, we found that although producer colonies can greatly benefit from the inhibition of nearby sensitive colonies, this benefit is shared with resistant colonies growing in their vicinity. A simple model, which accounts for such local competitive and inhibitory interactions, suggests that the advantage of producers varies non-monotonically with the amount of production. Indeed, experimentally varying the amount of production shows a peak in selection for producers, reflecting a trade-off between benefit gained by inhibiting sensitive competitors and loss due to an increased contribution to resistant cheater colonies. These results help explain the low level of antibiotic production observed for natural species and can help direct laboratory evolution experiments selecting for increased or novel production of antibiotics.

  4. Study on Increasing High Temperature pH(t) to Reduce Iron Corrosion Products

    International Nuclear Information System (INIS)

    Shin, Dong Man; Hur, Nam Yong; Kim, Waang Bae

    2011-01-01

    The transportation and deposition of iron corrosion products are important elements that affect both the steam generator (SG) integrity and secondary system in pressurized water reactor (PWR) nuclear power plants. Most of iron corrosion products are generated on carbon steel materials due to flow accelerated corrosion (FAC). The several parameters like water chemistry, temperature, hydrodynamic, and steel composition affect FAC. It is well established that the at-temperature pH of the deaerated water system has a first order effect on the FAC rate of carbon steels through nuclear industry researches. In order to reduce transportation and deposition of iron corrosion products, increasing pH(t) tests were applied on secondary system of A, B units. Increasing pH(t) successfully reduced flow accelerated corrosion. The effect of increasing pH(t) to inhibit FAC was identified through the experiment and pH(t) evaluation in this paper

  5. Increasing energy efficiency level of building production based on applying modern mechanization facilities

    Science.gov (United States)

    Prokhorov, Sergey

    2017-10-01

    Building industry in a present day going through the hard times. Machine and mechanism exploitation cost, on a field of construction and installation works, takes a substantial part in total building construction expenses. There is a necessity to elaborate high efficient method, which allows not only to increase production, but also to reduce direct costs during machine fleet exploitation, and to increase its energy efficiency. In order to achieve the goal we plan to use modern methods of work production, hi-tech and energy saving machine tools and technologies, and use of optimal mechanization sets. As the optimization criteria there are exploitation prime cost and set efficiency. During actual task-solving process we made a conclusion, which shows that mechanization works, energy audit with production juxtaposition, prime prices and costs for energy resources allow to make complex machine fleet supply, improve ecological level and increase construction and installation work quality.

  6. Dietary Protected Feed Supplement to Increase Milk Production and Quality of Dairy Cows

    Science.gov (United States)

    Pramono, A.; Handayanta, E.; Widayati, D. T.; Putro, P. P.; Kustono

    2017-04-01

    The efforts to improve and optimize productivity of dairy cows require sufficient availability of nutrients, especially high energy in the early period of lactation. Increasing energy intake in dairy cows can be conducted by increasing the density of energy. The research aimed to evaluate dietary protected feed supplement on milk production and quality, including: fat, protein, and lactose content of Friesian Holstein dairy cow milk. Protected feed supplement was produced from sardine fish oil, through saponification and microencapsulation protection methods. The experiment consists of two treatments i.e. P0: basal diet (control) and P1: basal diet + 3 % protected feed supplement. Each treatment was repeated 15 times. Data were analyzed by independent samples t-test analysis. Results showed that supplementation of protected sardine fish oil had no effect on lactose content, but increased milk yield production (pmilk fat content (p<0.05), and protein content (p<0.05).

  7. Temperature-dependent dynamic control of the TCA cycle increases volumetric productivity of itaconic acid production by Escherichia coli.

    Science.gov (United States)

    Harder, Björn-Johannes; Bettenbrock, Katja; Klamt, Steffen

    2018-01-01

    Based on the recently constructed Escherichia coli itaconic acid production strain ita23, we aimed to improve the productivity by applying a two-stage process strategy with decoupled production of biomass and itaconic acid. We constructed a strain ita32 (MG1655 ΔaceA Δpta ΔpykF ΔpykA pCadCs), which, in contrast to ita23, has an active tricarboxylic acid (TCA) cycle and a fast growth rate of 0.52 hr -1 at 37°C, thus representing an ideal phenotype for the first stage, the growth phase. Subsequently we implemented a synthetic genetic control allowing the downregulation of the TCA cycle and thus the switch from growth to itaconic acid production in the second stage. The promoter of the isocitrate dehydrogenase was replaced by the Lambda promoter (p R ) and its expression was controlled by the temperature-sensitive repressor CI857 which is active at lower temperatures (30°C). With glucose as substrate, the respective strain ita36A grew with a fast growth rate at 37°C and switched to production of itaconic acid at 28°C. To study the impact of the process strategy on productivity, we performed one-stage and two-stage bioreactor cultivations. The two-stage process enabled fast formation of biomass resulting in improved peak productivity of 0.86 g/L/hr (+48%) and volumetric productivity of 0.39 g/L/hr (+22%) in comparison to the one-stage process. With our dynamic production strain, we also resolved the glutamate auxotrophy of ita23 and increased the itaconic acid titer to 47 g/L. The temperature-dependent activation of gene expression by the Lambda promoters (p R /p L ) has been frequently used to improve protein or, in a few cases, metabolite production in two-stage processes. Here we demonstrate that the system can be as well used in the opposite direction to selectively knock-down an essential gene (icd) in E. coli to design a two-stage process for improved volumetric productivity. The control by temperature avoids expensive inducers and has the

  8. Increasing the stability of DNA nanostructure templates by atomic layer deposition of Al2O3 and its application in imprinting lithography

    Directory of Open Access Journals (Sweden)

    Hyojeong Kim

    2017-11-01

    Full Text Available We present a method to increase the stability of DNA nanostructure templates through conformal coating with a nanometer-thin protective inorganic oxide layer created using atomic layer deposition (ALD. DNA nanotubes and origami triangles were coated with ca. 2 nm to ca. 20 nm of Al2O3. Nanoscale features of the DNA nanostructures were preserved after the ALD coating and the patterns are resistive to UV/O3 oxidation. The ALD-coated DNA templates were used for a direct pattern transfer to poly(L-lactic acid films.

  9. Increasing the total productivity of a land by combining mobile photovoltaic panels and food crops

    International Nuclear Information System (INIS)

    Valle, B.; Simonneau, T.; Sourd, F.; Pechier, P.; Hamard, P.; Frisson, T.; Ryckewaert, M.; Christophe, A.

    2017-01-01

    Highlights: •Combining solar panels and crops on the same land increases the total productivity. •Use of solar trackers permits to balance or promote food/energy production. •Controlling mode of trackers strongly affect the total production per unit area. •Dynamic agrivoltaic systems increases productivity without competing with food. -- Abstract: Agrivoltaic systems, consisting of the combination of photovoltaic panels (PVPs) with crops on the same land, recently emerged as an opportunity to resolve the competition for land use between food and energy production. Such systems have proved efficient when using stationary PVPs at half their usual density. Dynamic agrivoltaic systems improved the concept by using orientable PVPs derived from solar trackers. They offer the possibility to intercept the variable part of solar radiation, as well as new means to increase land productivity. The matter was analysed in this work by comparing fixed and dynamic systems with two different orientation policies. Performances of the resulting agrivoltaic systems were studied for two varieties of lettuce over three different seasons. Solar tracking systems placed all plants in a new microclimate where light and shade bands alternated several times a day at any plant position, while stationary systems split the land surface into more stable shaded and sunlit areas. In spite of these differences, transient shading conditions increased plant leaf area in all agrivoltaic systems compared to full-sun conditions, resulting in a higher conversion of the transmitted radiation by the crop. This benefit was lower during seasons with high radiation and under controlled tracking with more light transmitted to the crop. As expected, regular tracking largely increased electric production compared to stationary PVPs but also slightly increased the transmitted radiation, hence crop biomass. A large increase in transmitted radiation was achieved by restricting solar tracking around midday

  10. Woody biomass production lags stem-girth increase by over one month in coniferous forests.

    Science.gov (United States)

    Cuny, Henri E; Rathgeber, Cyrille B K; Frank, David; Fonti, Patrick; Mäkinen, Harri; Prislan, Peter; Rossi, Sergio; Del Castillo, Edurne Martinez; Campelo, Filipe; Vavrčík, Hanuš; Camarero, Jesus Julio; Bryukhanova, Marina V; Jyske, Tuula; Gričar, Jožica; Gryc, Vladimír; De Luis, Martin; Vieira, Joana; Čufar, Katarina; Kirdyanov, Alexander V; Oberhuber, Walter; Treml, Vaclav; Huang, Jian-Guo; Li, Xiaoxia; Swidrak, Irene; Deslauriers, Annie; Liang, Eryuan; Nöjd, Pekka; Gruber, Andreas; Nabais, Cristina; Morin, Hubert; Krause, Cornelia; King, Gregory; Fournier, Meriem

    2015-10-26

    Wood is the main terrestrial biotic reservoir for long-term carbon sequestration(1), and its formation in trees consumes around 15% of anthropogenic carbon dioxide emissions each year(2). However, the seasonal dynamics of woody biomass production cannot be quantified from eddy covariance or satellite observations. As such, our understanding of this key carbon cycle component, and its sensitivity to climate, remains limited. Here, we present high-resolution cellular based measurements of wood formation dynamics in three coniferous forest sites in northeastern France, performed over a period of 3 years. We show that stem woody biomass production lags behind stem-girth increase by over 1 month. We also analyse more general phenological observations of xylem tissue formation in Northern Hemisphere forests and find similar time lags in boreal, temperate, subalpine and Mediterranean forests. These time lags question the extension of the equivalence between stem size increase and woody biomass production to intra-annual time scales(3, 4, 5, 6). They also suggest that these two growth processes exhibit differential sensitivities to local environmental conditions. Indeed, in the well-watered French sites the seasonal dynamics of stem-girth increase matched the photoperiod cycle, whereas those of woody biomass production closely followed the seasonal course of temperature. We suggest that forecasted changes in the annual cycle of climatic factors(7) may shift the phase timing of stem size increase and woody biomass production in the future.

  11. How does increased corn-ethanol production affect US natural gas prices?

    International Nuclear Information System (INIS)

    Whistance, Jarrett; Thompson, Wyatt

    2010-01-01

    In recent years, there has been a push to increase biofuel production in the United States. The biofuel of choice, so far, has been ethanol produced from corn. The effects of increased corn-ethanol production on the consumer prices of food and energy continue to be studied and debated. This study examines, in particular, the effects of increased corn-ethanol production on US natural gas prices. A structural model of the natural gas market is developed and estimated using two stage least squares. A baseline projection for the period 2007-2018 is determined, and two scenarios are simulated. In the first scenario, current biofuel policies including EISA mandates, tariffs, and tax credits are removed. In the second scenario, we hold ethanol production to the level required only for largely obligatory additive use. The results indicate that the increased level of corn-ethanol production occurring as a result of the current US biofuel policies may lead to natural gas prices that are as much as 0.25% higher, on average, than if no biofuel policies were in place. A similar comparison between the baseline and second scenario indicates natural gas prices could be as much as 0.5% higher, on average, for the same period.

  12. Enhanced itaconic acid production in Aspergillus with increased LaeA expression

    Science.gov (United States)

    Dai, Ziyu; Baker, Scott E.

    2018-03-06

    Fungi, such as Aspergillus niger, having a dolichyl-P-Man:Man(5)GlcNAc(2)-PP-dolichyl mannosyltransferase (Alg3) gene genetic inactivation, increased expression of a loss of aflR expression A (LaeA), or both, are described. In some examples, such mutants have several phenotypes, including an increased production of citric acid relative to the parental strain. Methods of using the disclosed fungi to make citric acid are also described, as are compositions and kits including the disclosed fungi. Further described are Aspergillus terreus fungi overexpressing the LaeA gene and the use of such fungi for the production of itaconic acid.

  13. Ethanol and agriculture: Effect of increased production on crop and livestock sectors. Agricultural economic report

    International Nuclear Information System (INIS)

    House, R.; Peters, M.; Baumes, H.; Disney, W.T.

    1993-05-01

    Expanded ethanol production could increase US farm income by as much as $1 billion (1.4 percent) by 2000. Because corn is the primary feedstock for ethanol, growers in the Corn Belt would benefit most from improved ethanol technology and heightened demand. Coproducts from the conversion process (corn gluten meal, corn gluten feed, and others) compete with soybean meal, soybean growers in the South may see revenues decline. The US balance of trade would improve with increased ethanol production as oil import needs decline

  14. Problems of Development and Increase of Economic Efficiency of Sugar Beet Production

    Directory of Open Access Journals (Sweden)

    Tomashevska Olga A.

    2017-06-01

    Full Text Available The aim of the article is the studying of the trends of development and economic efficiency of sugar beet production (using the example of agricultural enterprises of Rokytne district of Kyiv region and an attempt to outline the directions for improvement of the situation in the sugar beet industry. As a result of the research, the dynamics of development and economic efficiency of sugar beet production at farms of Rokytne district of Kyiv region is analyzed, and the break-even volume of sugar beet production by agrarian enterprises of Kiev region and an individual enterprise of Rokytne district is determined. Particular attention is paid to the dynamics of profitability of sugar beet production in the period from 2011 to 2015. The main problems hindering the development of sugar beet production are identified, namely, the lack of sales channels and high production costs. Prospects for further research in this area are to increase the economic efficiency of sugar beet production and find ways to develop this sector, provided that the production is properly organized, the manufacturing process is followed, the fertilizers are properly used, the seeds are chosen correctly, advanced technologies and high-performance equipment are applied, etc.

  15. Wine tourism product clubs as a way to increase wine added value: the case of Spain

    Directory of Open Access Journals (Sweden)

    Francisco José Del Campo Gomis

    2010-06-01

    Full Text Available Francisco José Del Campo Gomis, David López Lluch, José Miguel Sales Civera, Asunción M Agulló Torres, Margarita Brugarolas, Mollá-Bauzá, África Martínez Poveda, Fermín Camacho de los Ríos, Antonio Miguel Nogués PedregalDepartament of Agrienvironmental Economics, Universidad Miguel Hernández, Campus Universitario de Orihuela-Desamparados, Orihuela (Alicante, SpainAbstract: The objective of this paper is to analyze how the wine tourism product clubs work in Spain and their importance for Spanish wine tourism. A tourism product club is a product development partnership established and led by the tourism industry stakeholders including small- and/or medium-sized companies. The group pools its resources to develop new marketready products or to increase the value of existing ones. Lodging companies, tour operators, administrators of tourism facilities, tourist associations, government, other companies of the sector and, even, nontourist companies can participate as members of a tourism product club. Following this model, wine tourism can contribute to create a wine tourism product club. In Spain the international promotion of tourist products is carried out through the Turespaña website. The wine tourism product club, The Wine Routes of Spain, is one of the wine tourism product clubs developed by the Spanish government. It is an ambitious project that began in 2001. Nevertheless, other Spanish regions have created more wine tourism product clubs in order to develop their own wine tourism industry such as “Divinum vitae – Where the pleasues are born” created in Castilla–La Mancha in 2006.Keywords: wine, tourism, product club, Spain

  16. Envisioning a metropolitan foodshed: potential environmental consequences of increasing food-crop production around Chicago

    Science.gov (United States)

    Bowen, E. E.; Martin, P. A.; Schuble, T. J.

    2009-12-01

    Nationwide, cities are increasingly developing policies aimed at greater sustainability, particularly focusing on reducing environmental impact. Such policies commonly emphasize more efficiently using energy to decrease the greenhouse gas (GHG) footprint of the city. However, most plans ignore the food system as a factor in regional energy use and GHG emissions. Yet, the food system in the United States accounts for ~20% of per capita greenhouse gas emissions. Local, sustainable food production is cited as one strategy for mitigating GHG emissions of large metropolitan areas. “Sustainable” for regional agriculture is often identified as small-scale, diversified food crop production using best practices management. Localized food production (termed “foodshed”) using sustainable agriculture could mitigate climate change in multiple ways: (1) energy and therefore CO2-intensive portions of the conventional food system might be replaced by local, lower-input food production resulting in carbon offsets; (2) increased regional carbon storage might result from well-managed food crop production vs. commodity crop production; and (3) averted N2O emissions might result from closing nutrient cycles on agricultural lands following changes in management practices. The broader implications for environmental impact of widespread conversion to sustainable food crop agriculture, however, remain largely unknown. We examine the Chicago metropolitan region to quantify the impact of increased local food production on regional energy efficiency and GHG emissions. Geospatial analysis is used to quantify the resource potential for establishing a Chicago metropolitan foodshed. A regional foodshed is defined by minimizing cost through transportation mode (road, rail, or water) and maximizing the production potential of different soil types. Simple biogeochemical modeling is used to predict changes in N2O emissions and nutrient flows following changes in land management practices

  17. Progress in the production of intense ion beams and the formation of proton layers

    International Nuclear Information System (INIS)

    Kapetanakos, C.A.; Golden, J.; Marsh, S.J.; Mahaffey, R.A.

    1977-01-01

    The results on ion sources and the application of ion beams to the formation of proton layers and rings are presented. Ion beams have been produced on three different generators. Some results from the experiments performed on the Gamble 2 generator are presented. The Gamble 2 generator with coaxial anode-cathode configuration, hollow beam cross-section produces power levels of 0.6-1.2 MV with peak ion current of 200 kA. The number of protons in the beam 4x10 16 . Peak ion currents is excess 200 kA, energy 1 MeV, ion current density 1 kA/cm 2 . Magnetic field configuration to provide formation of strong proton layers is shown

  18. Religion, Belief and Medial Layering of Communication. Perspectives from Studies in Visual Culture and Artistic Productions

    Directory of Open Access Journals (Sweden)

    Sigrid Schade

    2015-11-01

    Full Text Available The paper analyses the relationship between religious practices, belief and the media based on the medial layering of communication. The arguments are situated within the fields of studies in visual culture and cultural studies, reflecting on the role of art as a specific medium in the Western religious tradition. Vera Frenkel’s video This Is Your Messiah Speaking (1990 is reviewed as a critical inquiry into religious practices and the media structures of communication.

  19. Synthesis of Cd/(Al+Fe) layered double hydroxides and characterization of the calcination products

    International Nuclear Information System (INIS)

    Perez, M.R.; Barriga, C.; Fernandez, J.M.; Rives, V.; Ulibarri, M.A.

    2007-01-01

    Layered double hydroxides (LDHs) containing Cd(II), Al(III), and Fe(III) in the brucite-like layers with different starting Fe/Al atomic ratios and with nitrate as counteranion have been prepared following the coprecipitation method at a constant pH value of 8. An additional Cd(II),Al(III)-LDH sample interlayered with hexacyanoferrate(III) ions has been prepared by ionic exchange at pH 9. The samples have been characterized by elemental chemical analysis, powder X-ray diffraction (PXRD), and FT-IR spectroscopy. Their thermal stability has been assessed by thermogravimetric and differential thermal analyses (TG-DTA) and mass spectrometric analysis of the evolved gases. The PXRD patterns of the solids calcined at 800 deg. C show diffraction lines corresponding to Cd(Al)O and spinel-type materials, which precise nature (CdAl 2 O 4 , Cd 1-x Fe 2+x O 4 , or Cd x Fe 2.66 O 4 ) depends on location and concentration of iron in the parent material or precursor. - Graphical abstract: Layered double hydroxides (LDHs) containing Cd(II), Al(III), and Fe(III) in the brucite-like layers with different starting Fe/Al atomic ratios and with nitrate as counteranion have been prepared following the coprecipitation method. An additional Cd(II),Al(III)-LDH sample interlayered with hexacyanoferrate(III) ions has been prepared by ionic exchange. Calcination at 800 deg. C shows diffraction lines corresponding to CdO and to spinel-type materials. SEM micrograph of sample CdAlFe-N-0

  20. Dry Deposition, Surface Production and Dynamics of Aerosols in the Marine Boundary Layer

    DEFF Research Database (Denmark)

    Fairall, C.W.; Larsen, Søren Ejling

    1984-01-01

    A model of downward aerosol panicle flux characterized by dry deposition velocity, Vd, due to Slinn and Slinn (1980) is generalized to the case of nonzero surface concentration (absorbing surface with a surface source). A more general expression for the flux at some reference height is developed ...... produced as droplets at the surface and ‘continental’ background aerosols brought into the boundary layer at the top by entrainment and gravitational settling. Estimates of Si are provided....

  1. Interleukin-2 stimulates osteoclastic activity: Increased acid production and radioactive calcium release

    International Nuclear Information System (INIS)

    Ries, W.L.; Seeds, M.C.; Key, L.L.

    1989-01-01

    Recombinant human interleukin-2 (IL-2) was studied to determine effects on acid production by individual osteoclasts in situ on mouse calvarial bones. This analysis was performed using a microspectrofluorimetric technique to quantify acid production in individual cells. Radioactive calcium release was determined using calvarial bones in a standard tissue culture system. This allowed us to correlate changes in acid production with a measure of bone resorption. IL-2 stimulated acid production and bone resorbing activity. Both effects were inhibited by calcitonin. No stimulation of bone resorption occurred when IL-2-containing test media was incubated with a specific anti-IL-2 antibody and ultrafiltered. Our data demonstrated a correlation between acid production and bone resorbing activity in mouse calvaria exposed to parathyroid hormone (PTH). The data obtained from cultured mouse calvaria exposed to IL-2 demonstrated similar stimulatory effects to those seen during PTH exposure. These data suggest that calvaria exposed to IL-2 in vitro have increased osteoclastic acid production corresponding with increased bone resorption. (author)

  2. SIMPLE METHODS FOR INCREASING THE PRODUCTIVITY IN A WORKSHOP OF TEXTILE GARMENTS

    Directory of Open Access Journals (Sweden)

    PORAV Viorica

    2014-05-01

    Full Text Available This paper is based mainly on experience and is the result of optimization analysis of work operations in departments that make clothing products, with maximum 200 workers and financially unable to invest in expensive technical equipment. The analysis takes the problem of increasing productivity for some work operations, such as the operation of the realization of loops, cutting them to the required size, forming packages, for their application to the top of the pants. The analysis performed was concerned not only with increasing productivity but also to create better working conditions for workers. Of course, through a thorough analysis can be improved and other working methods. Ergonomic workplace organization, centralization of operations or handling study due to their repetitiveness, can result in significant savings of time working. Equally it may affect the operations times for making garments and methods of employment with cut marks and accessories needed, or how to discharge processed workpiece. This paper outlines some options for improving the performance of companies producing textiles, in idea of increasing labor productivity and product quality. Even if a firm producing textiles, has sufficient financial resources for modern equipment, the studies conducted by experts, can brings improvements in working time and this without high costs.

  3. Increasing Biogas Production Rate from Cattle Manure Using Rumen Fluid as Inoculums

    Directory of Open Access Journals (Sweden)

    Budiyono Budiyono

    2013-10-01

    Full Text Available Normal 0 false false false IN X-NONE X-NONE MicrosoftInternetExplorer4 In this study, rumen fluid of animal ruminant was used as inoculums to increase biogas production rate from cattle manure at mesophilic condition. A series of laboratory experiments using 400 ml biodigester were performed in batch operation mode. Given 100 grams of fresh cattle manure (M was fed to each biodigester and mixed with rumen fluid (R and tap water (W in several ratio resulting six different M:W:R ratio contents i.e. 1:1:0; 1:0.75:0.25; 1:0.5:0.5; 1:0.25:0.75; and 1:0:1 (correspond to 0; 12.5; 25, 37.5; 50, and 100 % rumen, respectively and six different total solid (TS contents i.e. 2.6, 4.6, 6.2, 7.4, 9.2, 12.3, and 18.4 %. The operating temperatures were at room temperature. The results showed that the rumen fluid inoculated to biodigester significantly effected the biogas production. Rumen fluid inoculums caused biogas production rate and efficiency increase more than two times in compare to manure substrate without rumen fluid inoculums. The best performance for biogas production was the digester with rumen fluid and TS content in the range of 25-50 % and 7.4 and 9.2 %, respectively. These results suggest that, based on TS content effects to biogas yield, rumen fluid inoculums exhibit the similar effect with other inoculums. Increasing rumen content will also increase biogas production. Due to the optimum total solid (TS content for biogas production between 7-9 % (or correspond to more and less manure and total liquid 1:1, the rumen fluid content of 50 % will give the best performance for biogas production. The future work will be carried out to study the dynamics of biogas production if both the rumen fluid inoculums and manure are fed in the continuous system Normal 0 false false false IN X-NONE X-NONE MicrosoftInternetExplorer4 Doi: 10.12777/ijse.6.1.31-38 [How to cite this article: Budiyono, Widiasa, I.N., Johari, S. and Sunarso. (2014. Increasing Biogas

  4. Identification and manipulation of the pleuromutilin gene cluster from Clitopilus passeckerianus for increased rapid antibiotic production

    Science.gov (United States)

    Bailey, Andy M.; Alberti, Fabrizio; Kilaru, Sreedhar; Collins, Catherine M.; de Mattos-Shipley, Kate; Hartley, Amanda J.; Hayes, Patrick; Griffin, Alison; Lazarus, Colin M.; Cox, Russell J.; Willis, Christine L.; O'Dwyer, Karen; Spence, David W.; Foster, Gary D.

    2016-05-01

    Semi-synthetic derivatives of the tricyclic diterpene antibiotic pleuromutilin from the basidiomycete Clitopilus passeckerianus are important in combatting bacterial infections in human and veterinary medicine. These compounds belong to the only new class of antibiotics for human applications, with novel mode of action and lack of cross-resistance, representing a class with great potential. Basidiomycete fungi, being dikaryotic, are not generally amenable to strain improvement. We report identification of the seven-gene pleuromutilin gene cluster and verify that using various targeted approaches aimed at increasing antibiotic production in C. passeckerianus, no improvement in yield was achieved. The seven-gene pleuromutilin cluster was reconstructed within Aspergillus oryzae giving production of pleuromutilin in an ascomycete, with a significant increase (2106%) in production. This is the first gene cluster from a basidiomycete to be successfully expressed in an ascomycete, and paves the way for the exploitation of a metabolically rich but traditionally overlooked group of fungi.

  5. Can Precision Agriculture Increase the Profitability and Sustainability of the Production of Potatoes and Olives?

    Directory of Open Access Journals (Sweden)

    Frits K. van Evert

    2017-10-01

    Full Text Available For farmers, the application of Precision Agriculture (PA technology is expected to lead to an increase in profitability. For society, PA is expected to lead to increased sustainability. The objective of this paper is to determine for a number of common PA practices how much they increase profitability and sustainability. For potato production in The Netherlands, we considered variable rate application (VRA of soil herbicide, fungicide for late blight control, sidedress N, and haulm killing herbicide. For olive production in Greece, we considered spatially variable application of P and K fertilizer and lime. For each of the above scenarios, we quantified the value of outputs, the cost of inputs, and the environmental costs. This allowed us to calculate profit as well as social profit, where the latter is defined as revenues minus conventional costs minus the external costs of production. Social profit can be considered an overall measure of sustainability. Our calculations show that PA in potatoes increases profit by 21% (420 € ha−1 and social profit by 26%. In olives, VRA application of P, K, and lime leads to a strong reduction in nutrient use and although this leads to an increase in sustainability, it has only a small effect on profit and on social profit. In conclusion, PA increases sustainability in olives and both profitability and sustainability in potatoes.

  6. Regional air quality impacts of increased natural gas production and use in Texas.

    Science.gov (United States)

    Pacsi, Adam P; Alhajeri, Nawaf S; Zavala-Araiza, Daniel; Webster, Mort D; Allen, David T

    2013-04-02

    Natural gas use in electricity generation in Texas was estimated, for gas prices ranging from $1.89 to $7.74 per MMBTU, using an optimal power flow model. Hourly estimates of electricity generation, for individual electricity generation units, from the model were used to estimate spatially resolved hourly emissions from electricity generation. Emissions from natural gas production activities in the Barnett Shale region were also estimated, with emissions scaled up or down to match demand in electricity generation as natural gas prices changed. As natural gas use increased, emissions decreased from electricity generation and increased from natural gas production. Overall, NOx and SO2 emissions decreased, while VOC emissions increased as natural gas use increased. To assess the effects of these changes in emissions on ozone and particulate matter concentrations, spatially and temporally resolved emissions were used in a month-long photochemical modeling episode. Over the month-long photochemical modeling episode, decreases in natural gas prices typical of those experienced from 2006 to 2012 led to net regional decreases in ozone (0.2-0.7 ppb) and fine particulate matter (PM) (0.1-0.7 μg/m(3)). Changes in PM were predominantly due to changes in regional PM sulfate formation. Changes in regional PM and ozone formation are primarily due to decreases in emissions from electricity generation. Increases in emissions from increased natural gas production were offset by decreasing emissions from electricity generation for all the scenarios considered.

  7. Microwave Pretreatments of Switchgrass Leaf and Stem Fractions to Increase Methane Production

    Directory of Open Access Journals (Sweden)

    Chunhui Wu

    2015-05-01

    Full Text Available The objective of this study was to determine the effectiveness of microwave pretreatments on methane production from two switchgrass tissues (leaf vs. stem. The methane production from the leaf fraction was significantly affected by the microwave final temperature, while production from the stem fraction was affected by the combination of the microwave final temperature and heating rate. Thus, the highest methane yield from the leaf (134.81 mL CH4/g of volatile solids (VS was obtained at 100 °C, while the highest yield from the stem (99.35 mL CH4/g VS was obtained at 150 °C, with a heating rate of 10 °C/min. Although methane production from the leaf fraction was merely enhanced by 9.1% after microwave pretreatments, the time required to reach 80% of ultimate methane production was reduced by 12 days. For the stem fraction, methane production was improved by 5.2% after microwave pretreatment, and the time to obtain 80% of ultimate methane production increased.

  8. Water quality under increased biofuel production and future climate change and uncertainty

    Science.gov (United States)

    Demissie, Y. K.; Yan, E.

    2015-12-01

    Over the past decade, biofuel has emerged as an important renewable energy source to supplement gasoline and reduce the associated greenhouse gas emission. Many countries, for instant, have adopted biofuel production goals to blend 10% or more of gasoline with biofuels within 10 to 20 years. However, meeting these goals requires sustainable production of biofuel feedstock which can be challenging under future change in climate and extreme weather conditions, as well as the likely impacts of biofuel feedstock production on water quality and availability. To understand this interrelationship and the combined effects of increased biofuel production and climate change on regional and local water resources, we have performed watershed hydrology and water quality analyses for the Ohio River Basin. The basin is one of the major biofuel feedstock producing region in the United States, which also currently contributes about half of the flow and one third of phosphorus and nitrogen loadings to the Mississippi River that eventually flows to the Gulf of Mexico. The analyses integrate future scenarios and climate change and biofuel development through various mixes of landuse and agricultural management changes and examine their potential impacts on regional and local hydrology, water quality, soil erosion, and agriculture productivity. The results of the study are expected to provide much needed insight about the sustainability of large-scale biofuel feedstock production under the future climate change and uncertainty, and helps to further optimize the feedstock production taking into consideration the water-use efficiency.

  9. Do ergonomics improvements increase computer workers' productivity?: an intervention study in a call centre.

    Science.gov (United States)

    Smith, Michael J; Bayehi, Antoinette Derjani

    2003-01-15

    This paper examines whether improving physical ergonomics working conditions affects worker productivity in a call centre with computer-intensive work. A field study was conducted at a catalogue retail service organization to explore the impact of ergonomics improvements on worker production. There were three levels of ergonomics interventions, each adding incrementally to the previous one. The first level was ergonomics training for all computer users accompanied by workstation ergonomics analysis leading to specific customized adjustments to better fit each worker (Group C). The second level added specific workstation accessories to improve the worker fit if the ergonomics analysis indicated a need for them (Group B). The third level met Group B requirements plus an improved chair (Group A). Productivity data was gathered from 72 volunteer participants who received ergonomics improvements to their workstations and 370 control subjects working in the same departments. Daily company records of production outputs for each worker were taken before ergonomics intervention (baseline) and 12 months after ergonomics intervention. Productivity improvement from baseline to 12 months post-intervention was examined across all ergonomics conditions combined, and also compared to the control group. The findings showed that worker performance increased for 50% of the ergonomics improvement participants and decreased for 50%. Overall, there was a 4.87% output increase for the ergonomics improvement group as compared to a 3.46% output decrease for the control group. The level of productivity increase varied by the type of the ergonomics improvements with Group C showing the best improvement (9.43%). Even though the average production improved, caution must be used in interpreting the findings since the ergonomics interventions were not successful for one-half of the participants.

  10. Aggravated phosphorus limitation on biomass production under increasing nitrogen loading: a meta-analysis.

    Science.gov (United States)

    Li, Yong; Niu, Shuli; Yu, Guirui

    2016-02-01

    Nitrogen (N) and phosphorus (P), either individually or in combination, have been demonstrated to limit biomass production in terrestrial ecosystems. Field studies have been extensively synthesized to assess global patterns of N impacts on terrestrial ecosystem processes. However, to our knowledge, no synthesis has been done so far to reveal global patterns of P impacts on terrestrial ecosystems, especially under different nitrogen (N) levels. Here, we conducted a meta-analysis of impacts of P addition, either alone or with N addition, on aboveground (AGB) and belowground biomass production (BGB), plant and soil P concentrations, and N : P ratio in terrestrial ecosystems. Overall, our meta-analysis quantitatively confirmed existing notions: (i) colimitation of N and P on biomass production and (ii) more P limitation in tropical forest than other ecosystems. More importantly, our analysis revealed new findings: (i) P limitation on biomass production was aggravated by N enrichment and (ii) plant P concentration was a better indicator of P limitation than soil P availability. Specifically, P addition increased AGB and BGB by 34% and 13%, respectively. The effect size of P addition on biomass production was larger in tropical forest than grassland, wetland, and tundra and varied with P fertilizer forms, P addition rates, or experimental durations. The P-induced increase in biomass production and plant P concentration was larger under elevated than ambient N. Our findings suggest that the global limitation of P on biomass production will become severer under increasing N fertilizer and deposition in the future. © 2015 John Wiley & Sons Ltd.

  11. Impact of Increased Corn Production on Ground Water Quality and Human Health

    Science.gov (United States)

    In this study, we use a complex coupled modeling system to assess the impacts of increased corn production on groundwater. In particular, we show how the models provide new information on the drivers of contamination in groundwater, and then relate pollutant concentration change...

  12. Increased productivity in power plants by the computer-based information system PRAUT

    International Nuclear Information System (INIS)

    Hanbaba, P.

    1978-01-01

    Decrease of commissionning times, reduction of shut-down periods, avoiding of power reductions, fast adaption to load requirement variations act in the direction of increasing the productivity of a power plant. An essential contribution to this is provided by harmonized control, monitoring and communications concepts as realized, e.g. in the PRO-CONTROL system by Brown Boveri. (orig.) [de

  13. Sorting cells of the microalga Chlorococcum littorale with increased triacylglycerol productivity

    NARCIS (Netherlands)

    Dominguez Teles, I.; Zwart, van der Mathijs; Kleinegris, D.M.M.; Wijffels, R.H.; Barbosa, M.J.

    2016-01-01

    Despite extensive research in the last decades, microalgae are still only economically feasible for high valued markets. Strain improvement is a strategy to increase productivities, hence reducing costs. In this work, we focus on microalgae selection: taking advantage of the natural biological

  14. Elevated levels of homocysteine increase IL-6 production in monocytic Mono Mac 6 cells

    NARCIS (Netherlands)

    van Aken, B. E.; Jansen, J.; van Deventer, S. J.; Reitsma, P. H.

    2000-01-01

    Hyperhomocysteinemia is a risk factor for atherosclerosis and thrombosis. The aim of this study was to analyze if exposure of monocytic cells to increased levels of homocysteine (HCY) induces the accumulation of inflammatory mediators. Interleukin (IL)-6 production by monocytic cell line Mono Mac 6

  15. Agents that increase phosphatidic acid inhibit the LH-induced testosterone production

    DEFF Research Database (Denmark)

    Lauritzen, L.; Nielsen, L.-L.A.; Vinggaard, Anne Marie

    1994-01-01

    The results of the present study point to phosphatidic acid (PtdOH) as a possible intracellular messenger, which might be involved in local modulation of testicular testosterone production in vivo. Propranolol (27-266 µM) induced an increased level of [H]PtdOH in isolated rat Leydig cells...

  16. Increasing the Value of Agricultural Products in the Face of Global ...

    African Journals Online (AJOL)

    The Paper examined the increasing value of agricultural products in the face of global economic recession in Anambra State. The paper revealed that Anambra State is endowed with human and natural resources and if properly harnessed, can go a long way in arresting the food insecurity in the State and alleviate the ...

  17. Using Self-Monitoring of Performance with Self-Graphing to Increase Academic Productivity in Math

    Science.gov (United States)

    Wells, Jenny C.; Sheehey, Patricia H.; Sheehey, Michael

    2017-01-01

    Self-regulation skills have been found to be an important predictor of achievement in mathematics. Teaching a student to regulate his or her behavior during independent math work sessions using self-monitoring of performance with self-graphing focuses him or her on academic performance and results in increases in productivity and math proficiency.…

  18. Exploring nutrient management options to increase nitrogen and phosphorus use efficiencies in food production of China

    NARCIS (Netherlands)

    Wang, Mengru; Ma, Lin; Strokal, Maryna; Chu, Yanan; Kroeze, Carolien

    2018-01-01

    Low nitrogen (NUE) and phosphorus (PUE) use efficiencies in food production in China result in large losses of nitrogen (N) and phosphorus (P) to the environment. The Chinese government formulated policies to increase the NUEs and PUEs. Recent policies aim for zero growth in synthetic fertilizer

  19. Interleukin-17A increases leptin production in human bone marrow mesenchymal stem cells.

    Science.gov (United States)

    Noh, Minsoo

    2012-03-01

    Lineage commitment of human bone marrow mesenchymal stem cells (hBM-MSCs) to adipocytes or osteoblasts has been suggested as a model system to study the relationship between type II diabetes and abnormal bone metabolism. Leptin and IL-17A inhibit adipogenesis whereas they promote osteogenesis in MSCs. Due to pathophysiologic roles of IL-17A in human metabolic diseases and bone metabolism, it was evaluated whether IL-17A-dependent inverse regulation on adipogenesis and osteogenesis was related to endogenous leptin production in hBM-MSCs. In the analysis of adiponectin and leptin secretion profiles of hBM-MSCs in response to various combinations of differentiation inducing factors, it was found that dexamethasone, a common molecule used for both adipogenesis and osteogenesis, increased leptin production in hBM-MSCs. Importantly, the level of leptin production during osteogenesis in hBM-MSCs was higher than that during adipogenesis, implicating a significant leptin production in extra-adipose tissues. IL-17A increased leptin production in hBM-MSCs and also under the condition of osteogenesis. In spite of direct inhibition on adipogenesis, IL-17A up-regulated leptin production in hBM-MSC-derived adipocytes. Anti-leptin antibody treatment partially antagonized the IL-17A dependent inhibition of adipogenesis in hBM-MSCs, suggesting a role of leptin in mediating the inverse regulation of IL-17A on osteogenesis and adipogenesis in hBM-MSCs. Therefore, the IL-17A-induced leptin production may provide a key clue to understand a molecular mechanism on the lineage commitment of hBM-MSCs into adipocytes or osteoblasts. In addition, leptin production in extra-adipose tissues like MSCs and osteoblasts should be considered in future studies on leptin-associated human diseases. Copyright © 2011 Elsevier Inc. All rights reserved.

  20. Photochemical ozone production in tropical squall line convection during NASA Global Tropospheric Experiment/Amazon Boundary Layer Experiment 2A

    Science.gov (United States)

    Pickering, Kenneth E.; Thompson, Anne M.; Tao, Wei-Kuo; Simpson, Joanne; Scala, John R.

    1991-01-01

    The role of convection was examined in trace gas transport and ozone production in a tropical dry season squall line sampled on August 3, 1985, during NASA Global Tropospheric Experiment/Amazon Boundary Layer Experiment 2A (NASA GTE/ABLE 2A) in Amazonia, Brazil. Two types of analyses were performed. Transient effects within the cloud are examined with a combination of two-dimensional cloud and one-dimensional photochemical modeling. Tracer analyses using the cloud model wind fields yield a series of cross sections of NO(x), CO, and O3 distribution during the lifetime of the cloud; these fields are used in the photochemical model to compute the net rate of O3 production. At noon, when the cloud was mature, the instantaneous ozone production potential in the cloud is between 50 and 60 percent less than in no-cloud conditions due to reduced photolysis and cloud scavenging of radicals. Analysis of cloud inflows and outflows is used to differentiate between air that is undisturbed and air that has been modified by the storm. These profiles are used in the photochemical model to examine the aftereffects of convective redistribution in the 24-hour period following the storm. Total tropospheric column O3 production changed little due to convection because so little NO(x) was available in the lower troposphere. However, the integrated O3 production potential in the 5- to 13-km layer changed from net destruction to net production as a result of the convection. The conditions of the August 3, 1985, event may be typical of the early part of the dry season in Amazonia, when only minimal amounts of pollution from biomass burning have been transported into the region.

  1. Primary energy and greenhouse gas implications of increasing biomass production through forest fertilization

    Energy Technology Data Exchange (ETDEWEB)

    Sathre, Roger [Ecotechnology, Mid Sweden University, Ostersund (Sweden); Gustavsson, Leif [Ecotechnology, Mid Sweden University, Ostersund (Sweden); Bergh, Johan [Ecotechnology, Mid Sweden University, Ostersund (Sweden); Southern Swedish Forest Research Centre, Swedish University of Agricultural Sciences, Alnarp (Sweden)

    2010-04-15

    In this study we analyze the primary energy and greenhouse gas (GHG) implications of increasing biomass production by fertilizing 10% of Swedish forest land. We estimate the primary energy use and GHG emissions from forest management including production and application of N and NPK fertilizers. Based on modelled growth response, we then estimate the net primary energy and GHG benefits of using biomaterials and biofuels obtained from the increased forest biomass production. The results show an increased annual biomass harvest of 7.4 million t dry matter, of which 41% is large-diameter stemwood. About 6.9 PJ/year of additional primary energy input is needed for fertilizer production and forest management. Using the additional biomass for fuel and material substitution can reduce fossil primary energy use by 150 or 164 PJ/year if the reference fossil fuel is fossil gas or coal, respectively. About 22% of the reduced fossil energy use is due to material substitution and the remainder is due to fuel substitution. The net annual primary energy benefit corresponds to about 7% of Sweden's total primary energy use. The resulting annual net GHG emission reduction is 11.9 million or 18.1 million tCO{sub 2equiv} if the reference fossil fuel is fossil gas or coal, respectively, corresponding to 18% or 28% of the total Swedish GHG emissions in 2007. A significant one-time carbon stock increase also occurs in wood products and forest tree biomass. These results suggest that forest fertilization is an attractive option for increasing energy security and reducing net GHG emission.

  2. Primary energy and greenhouse gas implications of increasing biomass production through forest fertilization

    International Nuclear Information System (INIS)

    Sathre, Roger; Gustavsson, Leif; Bergh, Johan

    2010-01-01

    In this study we analyze the primary energy and greenhouse gas (GHG) implications of increasing biomass production by fertilizing 10% of Swedish forest land. We estimate the primary energy use and GHG emissions from forest management including production and application of N and NPK fertilizers. Based on modelled growth response, we then estimate the net primary energy and GHG benefits of using biomaterials and biofuels obtained from the increased forest biomass production. The results show an increased annual biomass harvest of 7.4 million t dry matter, of which 41% is large-diameter stemwood. About 6.9 PJ/year of additional primary energy input is needed for fertilizer production and forest management. Using the additional biomass for fuel and material substitution can reduce fossil primary energy use by 150 or 164 PJ/year if the reference fossil fuel is fossil gas or coal, respectively. About 22% of the reduced fossil energy use is due to material substitution and the remainder is due to fuel substitution. The net annual primary energy benefit corresponds to about 7% of Sweden's total primary energy use. The resulting annual net GHG emission reduction is 11.9 million or 18.1 million tCO 2equiv if the reference fossil fuel is fossil gas or coal, respectively, corresponding to 18% or 28% of the total Swedish GHG emissions in 2007. A significant one-time carbon stock increase also occurs in wood products and forest tree biomass. These results suggest that forest fertilization is an attractive option for increasing energy security and reducing net GHG emission.

  3. Primary energy and greenhouse gas implications of increasing biomass production through forest fertilization

    Energy Technology Data Exchange (ETDEWEB)

    Sathre, Roger; Gustavsson, Leif [Ecotechnology, Mid Sweden University, Oestersund (Sweden); Bergh, Johan [Ecotechnology, Mid Sweden University, Oestersund (Sweden); Southern Swedish Forest Research Centre, Swedish University of Agricultural Sciences, Alnarp (Sweden)

    2010-04-15

    In this study we analyze the primary energy and greenhouse gas (GHG) implications of increasing biomass production by fertilizing 10% of Swedish forest land. We estimate the primary energy use and GHG emissions from forest management including production and application of N and NPK fertilizers. Based on modelled growth response, we then estimate the net primary energy and GHG benefits of using biomaterials and biofuels obtained from the increased forest biomass production. The results show an increased annual biomass harvest of 7.4 million t dry matter, of which 41% is large-diameter stemwood. About 6.9 PJ/year of additional primary energy input is needed for fertilizer production and forest management. Using the additional biomass for fuel and material substitution can reduce fossil primary energy use by 150 or 164 PJ/year if the reference fossil fuel is fossil gas or coal, respectively. About 22% of the reduced fossil energy use is due to material substitution and the remainder is due to fuel substitution. The net annual primary energy benefit corresponds to about 7% of Sweden's total primary energy use. The resulting annual net GHG emission reduction is 11.9 million or 18.1 million tCO{sub 2equiv} if the reference fossil fuel is fossil gas or coal, respectively, corresponding to 18% or 28% of the total Swedish GHG emissions in 2007. A significant one-time carbon stock increase also occurs in wood products and forest tree biomass. These results suggest that forest fertilization is an attractive option for increasing energy security and reducing net GHG emission. (author)

  4. The effect of polymers onto the size of zinc layered hydroxide salt and its calcined product

    Science.gov (United States)

    Hussein, Mohd Zobir bin; Ghotbi, Mohammad Yeganeh; Yahaya, Asmah Hj; Abd Rahman, Mohd Zaki

    2009-02-01

    Zinc hydroxide nitrate, a brucite-like layered material was synthesized using pH control method. Poly(vinyl alcohol) and poly(ethylene glycol) were used at various percentages as size decreasing agents during the synthesis of zinc hydroxide nitrate. SEM and PXRD showed the decrease of size and thickness of the resultant zinc hydroxide nitrates. TG and surface area data confirmed the decrease of the particle sizes, too. When zinc hydroxide nitrates were heat treated at 500 °C, the physical properties of nano zinc oxides obtained depended on the parent material, zinc hydroxide nitrate.

  5. Tobacco product prices before and after a statewide tobacco tax increase.

    Science.gov (United States)

    Brock, Betsy; Choi, Kelvin; Boyle, Raymond G; Moilanen, Molly; Schillo, Barbara A

    2016-03-01

    In 2013, the State of Minnesota Legislature passed a tobacco tax increase that increased the combined cigarette excise and sales tax by US$1.75 (from US$1.60 to US$3.35) and increased the tax on non-cigarette tobacco products from 70% to 95% of the wholesale price. The current study explores the change in tobacco prices in retail locations and whether the tax increase was fully passed to consumers. An observational study of tobacco retail prices was performed in a sample of 61 convenience stores in Minnesota, North Dakota, South Dakota and Wisconsin. Six rounds of data were collected between May 2013 and January 2014. In each round, purchases were made at the same stores for the same four tobacco products (Camel Blue cigarettes, Marlboro Gold cigarettes, Grizzly Wintergreen moist smokeless tobacco and Copenhagen Wintergreen moist smokeless tobacco). For all studied tobacco products, prices in Minnesota increased significantly after the tax increase (Round 1-Round 6). After controlling for price changes in neighbouring states, the average price difference in Minnesota for the two cigarette brands increased by US$1.89 and US$1.81, which are both more than the US$1.75 tax increase. For moist smokeless, the average price difference increased by US$0.90 and US$0.94. Significant price changes were not observed in the comparison states. After the introduction of the minimum moist smokeless tax, a significantly higher proportion of Minnesota stores offered price promotions on smokeless tobacco. A large tobacco tax resulted in an average retail cigarette price exceeding the tax, suggesting the industry over-shifted the cigarette tax increase to consumers in Minnesota. The findings support the known public health benefit of tobacco tax increases while highlighting the need for additional information about how, or if, tobacco companies use price promotions to blunt the impact of tax increases. Published by the BMJ Publishing Group Limited. For permission to use (where not

  6. On-line Professional Learning Communities: Increasing Teacher Learning and Productivity in Isolated Rural Communities

    Directory of Open Access Journals (Sweden)

    Dora Salazar

    2010-08-01

    Full Text Available On-line and distance professional learning communities provides teachers with increased access and flexibility as well as the combination of work and education. It also provides a more learner-centered approach, enrichment and new ways of interacting with teachers in isolated rural areas. For educational administrators, on-line learning offers high quality and usually cost-effective professional development for teachers. It allows upgrading of skills, increased productivity and development of a new learning culture. At the same time, it means sharing of costs, of training time, increased portability of training, and the exchange of creativity, information, and dialogue.

  7. Pharmaceutical new product development: the increasing role of in-licensing.

    Science.gov (United States)

    Edwards, Nancy V

    2008-12-01

    Many pharmaceutical companies are facing a pipeline gap because of the increasing economic burden and uncertainty associated with internal research and development programs designed to develop new pharmaceutical products. To fill this pipeline gap, pharmaceutical companies are increasingly relying on in-licensing opportunities. New business development identifies new pharmaceuticals that satisfy unmet needs and are a good strategic fit for the company, completes valuation models and forecasts, evaluates the ability of the company to develop and launch products, and pursues in-licensing agreements for pharmaceuticals that cannot be developed internally on a timely basis. These agreements involve the transfer of access rights for patents, trademarks, or similar intellectual property from an outside company in exchange for payments. Despite the risks, in-licensing is increasingly becoming the preferred method for pharmaceutical companies with pipeline gaps to bring new pharmaceuticals to the clinician.

  8. Phytohormone supplementation significantly increases growth of Chlamydomonas reinhardtii cultivated for biodiesel production.

    Science.gov (United States)

    Park, Won-Kun; Yoo, Gursong; Moon, Myounghoon; Kim, Chul Woong; Choi, Yoon-E; Yang, Ji-Won

    2013-11-01

    Cultivation is the most expensive step in the production of biodiesel from microalgae, and substantial research has been devoted to developing more cost-effective cultivation methods. Plant hormones (phytohormones) are chemical messengers that regulate various aspects of growth and development and are typically active at very low concentrations. In this study, we investigated the effect of different phytohormones on microalgal growth and biodiesel production in Chlamydomonas reinhardtii and their potential to lower the overall cost of commercial biofuel production. The results indicated that all five of the tested phytohormones (indole-3-acetic acid, gibberellic acid, kinetin, 1-triacontanol, and abscisic acid) promoted microalgal growth. In particular, hormone treatment increased biomass production by 54 to 69 % relative to the control growth medium (Tris-acetate-phosphate, TAP). Phytohormone treatments also affected microalgal cell morphology but had no effect on the yields of fatty acid methyl esters (FAMEs) as a percent of biomass. We also tested the effect of these phytohormones on microalgal growth in nitrogen-limited media by supplementation in the early stationary phase. Maximum cell densities after addition of phytohormones were higher than in TAP medium, even when the nitrogen source was reduced to 40 % of that in TAP medium. Taken together, our results indicate that phytohormones significantly increased microalgal growth, particularly in nitrogen-limited media, and have potential for use in the development of efficient microalgal cultivation for biofuel production.

  9. Increased ATP generation in the host cell is required for efficient vaccinia virus production

    Directory of Open Access Journals (Sweden)

    Hsu Che-Fang

    2009-09-01

    Full Text Available Abstract To search for cellular genes up-regulated by vaccinia virus (VV infection, differential display-reverse transcription-polymerase chain reaction (ddRT-PCR assays were used to examine the expression of mRNAs from mock-infected and VV-infected HeLa cells. Two mitochondrial genes for proteins that are part of the electron transport chain that generates ATP, ND4 and CO II, were up-regulated after VV infection. Up-regulation of ND4 level by VV infection was confirmed by Western blotting analysis. Up-regulation of ND4 was reduced by the MAPK inhibitor, apigenin, which has been demonstrated elsewhere to inhibit VV replication. The induction of ND4 expression occurred after viral DNA replication since ara C, an inhibitor of poxviral DNA replication, could block this induction. ATP production was increased in the host cells after VV infection. Moreover, 4.5 μM oligomycin, an inhibitor of ATP production, reduced the ATP level 13 hr after virus infection to that of mock-infected cells and inhibited viral protein expression and virus production, suggesting that increased ATP production is required for efficient VV production. Our results further suggest that induction of ND4 expression is through a Bcl-2 independent pathway.

  10. Assessment of herbal medicinal products: Challenges, and opportunities to increase the knowledge base for safety assessment

    International Nuclear Information System (INIS)

    Jordan, Scott A.; Cunningham, David G.; Marles, Robin J.

    2010-01-01

    Although herbal medicinal products (HMP) have been perceived by the public as relatively low risk, there has been more recognition of the potential risks associated with this type of product as the use of HMPs increases. Potential harm can occur via inherent toxicity of herbs, as well as from contamination, adulteration, plant misidentification, and interactions with other herbal products or pharmaceutical drugs. Regulatory safety assessment for HMPs relies on both the assessment of cases of adverse reactions and the review of published toxicity information. However, the conduct of such an integrated investigation has many challenges in terms of the quantity and quality of information. Adverse reactions are under-reported, product quality may be less than ideal, herbs have a complex composition and there is lack of information on the toxicity of medicinal herbs or their constituents. Nevertheless, opportunities exist to capitalise on newer information to increase the current body of scientific evidence. Novel sources of information are reviewed, such as the use of poison control data to augment adverse reaction information from national pharmacovigilance databases, and the use of more recent toxicological assessment techniques such as predictive toxicology and omics. The integration of all available information can reduce the uncertainty in decision making with respect to herbal medicinal products. The example of Aristolochia and aristolochic acids is used to highlight the challenges related to safety assessment, and the opportunities that exist to more accurately elucidate the toxicity of herbal medicines.

  11. Increased productivity through waste reduction effort in oil and gas company

    Science.gov (United States)

    Hidayati, J.; Silviana, NA; Matondang, RA

    2018-02-01

    National companies engaged in oil and gas activities in the upstream sector. In general, the on going operations include drilling, exploration, and production activities with the result being crude oil channelled for shipment. Production activities produce waste gas (flare) of 0.58 MMSCFD derived from 17.05% of natural gas produced. Gas flares are residual gases that have been burning through flare stacks to avoid toxic gases such as H2S and CO that are harmful to human health and the environment. Therefore, appropriate environmental management is needed; one of them is by doing waste reduction business. Through this approach, it is expected that waste reduction efforts can affect the improvement of environmental conditions while increasing the productivity of the company. In this research begins by identifying the existence of problems on the company related to the amount of waste that is excessive and potentially to be reduced. Alternative improvements are then formulated and selected by their feasibility to be implemented through financial analysis, and the estimation of alternative contributions to the level of productivity. The result of this research is an alternative solution to solve the problem of the company by doing technological based engineering by reusing gas flare into fuel for incinerator machine. This alternative contributes to the increased productivity of material use by 23.32%, humans 83.8%, capital 10.13 %, and waste decreased by 0.11%.

  12. Analysis of power and frequency control requirements in view of increased decentralized production and market liberalization

    International Nuclear Information System (INIS)

    Roffel, B.; Boer, W.W. de

    2003-01-01

    This paper presents a systematic approach of the analysis of the minimum control requirements that are imposed on power producing units in the Netherlands, especially in the case when decentralized production increases. Also some effects of the liberalization on the control behavior are analyzed. First an overview is given of the amount and type of power production in the Netherlands, followed by a review of the control requirements. Next models are described, including a simplified model for the UCTE power system. The model was tested against frequency and power measurements after failure of a 558 MW production unit in the Netherlands. Agreement between measurements and model predictions proved to be good. The model was subsequently used to analyze the primary and secondary control requirements and the impact of an increase in decentralized power production on the fault restoration capabilities of the power system. Since the latter production units are not actively participating in primary and secondary control, fault restoration takes longer and becomes unacceptable when only 35% of the power producing units participate in secondary control. Finally, the model was used to study the impact of deregulation, especially the effect of 'block scheduling', on additional control actions of the secondary control. (Author)

  13. Morphology control of anodic ZrO2 layer for the prevention of H2 production from Zr-4 cladding

    Energy Technology Data Exchange (ETDEWEB)

    Park, Y. J.; Park, J. W.; Cho, S. O. [Korea Advanced Institute of Science and Technology, Daejeon (Korea, Republic of)

    2014-05-15

    Since the Fukushima disaster happened, studies on accident-resistant nuclear fuel has been carried out actively. There has been an attempt to protect zircaloy fuel cladding by coating SiC. Research on producing oxide layer that can block fuel cladding from water on the surface of zircaloy fuel cladding by means of anodizing to reduce the rate of oxidation of fuel cladding at Loss Of Coolant Accident (LOCA) is an significant ongoing study subject. Applying nanostructured oxide layer to the prevention of thermal deformation of oxide layer was already suggested in our research group, the reasons of which is nanoporous structure is better than nanotube structure in terms of corrosion-resistant structure because nanotube structure can be easily peeled off. In this study, methods which are able to control morphology between nanoporous and nanotube structure were conducted by changing the anodizing conditions. Hence, Using glycerol and ammonium fluoride, Zircaloy-4 was anodized by varying water contents and applied voltage. It reveals that the alloy transition from nanoporous structure to nanotube structure can be changed by varying water contents of anodizing solution and applied voltage. Anodizing conditions determining nanoporous structure were obtained. According to the mechanism already suggested, nanoporous oxide layer that can seal the fuel cladding perfectly, and increase critical heat flux (CHF) due to large surface area is easily produced. This results obtained in this paper expected to be facilitated fabrication of accident-resistant nuclear fuel cladding.

  14. Strategies for academic leadership towards increasing productivity in higher education institutions; business education case

    Directory of Open Access Journals (Sweden)

    Iordache-Platis Magdalena

    2017-07-01

    Full Text Available Higher education institutions face a lot of challenges in the contemporary context. Labour market is s strict evaluator of the graduates’ competences and skills and thus, of the study programmes. An attractive university is a university with a large demand for studies, with many partners and projects, with a high visibility at national and international level, with a considerable research production. At present, the lack of resources characterizes the difficult situation for decision making process which is a real challenge for the academic leadership. On one hand, the competiton requires the need of continuous development and of differentiation strategy while on the other hand, insufficient financial, human, material, informational resources, including time as a specific restriction generate huge opportunities and threats for institutions. Possibilities of being efficient are to be explored. The aim of this paper is to explore possible strategies to increase productivity in higher education institutions. Main objectives of the study are the following: a. to define productivity in higher education institutions, on the basis of the academics’ perceptions, as well as of students’ perceptions; b. to provide a diagnosis of the current state of the prductivity in higher education institutions; c. to contribute to new clarifications on leadership strategies for increasing productivity in higher education institutions. Based on the literature review, the paper reveal proper answers to questions, such as: what is productivity, how is it measured, what is its impact, which are the increasing possibilities in business context. The study methodology is also based on a questionnaire dedicated to the two groups of respondents – academics and students. Their perceptions are then compared in order to reveal the common view. Main output of the research include: a. A new conceptual clarification for the productivity in higher education institutions; b. A

  15. Benfotiamine prevents increased β-amyloid production in HEK cells induced by high glucose.

    Science.gov (United States)

    Sun, Xiao-Jing; Zhao, Lei; Zhao, Na; Pan, Xiao-Li; Fei, Guo-Qiang; Jin, Li-Rong; Zhong, Chun-Jiu

    2012-10-01

    To determine whether high glucose enhances β-amyloid (Aβ) production in HEK293 Swedish mutant (APPsw) cells with Aβ precursor protein (APP) overexpression, and whether under this condition benfotiamine reduces the increasedproduction. HEK293 APPsw cells were cultured with different concentrations of glucose for different times. The Aβ content in the supernatant was determined by ELISA. To investigate the mechanism by which benfotiamine reduced Aβ production, glycogen synthase kinase-3 (GSK-3) activity and expression were measured after the cells were cultured with 5.5 g/L glucose for 12 h. With 1.0, 3.0, 4.5, 5.5, 6.5, 7.5, 8.5, or 10.5 g/L glucose, Aβ production by HEK293 APPsw cells was highest in the presence of 5.5 g/L glucose for 6 and 12 h. The difference in Aβ content between 5.5 and 1.0 g/L was most marked after incubation for 12 h. Benfotiamine at 20 and 40 μg/mL significantly reduced Aβ production in cells incubated with 5.5 g/L glucose for 12 h. Moreover, 40 μg/mL benfotiamine significantly enhanced the ratio of phosphorylated GSK-3 to total GSK-3, together with consistent down-regulation of GSK-3 activity. High glucose increasesproduction by HEK293 APPsw cells while benfotiamine prevents this increase. This is correlated with the modulation of GSK-3 activity.

  16. A discrete role for alternative oxidase under hypoxia to increase nitric oxide and drive energy production.

    Science.gov (United States)

    Vishwakarma, Abhaypratap; Kumari, Aprajita; Mur, Luis A J; Gupta, Kapuganti Jagadis

    2018-03-28

    Alternative oxidase (AOX) is an integral part of the mitochondrial electron transport and can prevent reactive oxygen species (ROS) and nitric oxide (NO) production under non-stressed, normoxic conditions. Here we assessed the roles of AOX by imposing stress under normoxia in comparison to hypoxic conditions using AOX over expressing (AOX OE) and anti-sense (AOX AS) transgenic Arabidopsis seedlings and roots. Under normoxic conditions stress was induced with the defence elicitor flagellin (flg22). AOX OE reduced NO production whilst this was increased in AOX AS. Moreover AOX AS also exhibited an increase in superoxide and therefore peroxynitrite, tyrosine nitration suggesting that scavenging of NO by AOX can prevent toxic peroxynitrite formation under normoxia. In contrast, during hypoxia interestingly we found that AOX is a generator of NO. Thus, the NO produced during hypoxia, was enhanced in AOX OE and suppressed in AOX AS. Additionally, treatment of WT or AOX OE with the AOX inhibitor SHAM inhibited hypoxic NO production. The enhanced levels of NO correlated with expression of non-symbiotic haemoglobin, increased NR activity and ATP production. The ATP generation was suppressed in nia1,2 mutant and non symbiotic haemoglobin antisense line treated with SHAM. Taken together these results suggest that hypoxic NO generation mediated by AOX has a discrete role by feeding into the haemoglobin-NO cycle to drive energy efficiency under conditions of low oxygen tension. Copyright © 2018 Elsevier Inc. All rights reserved.

  17. Five Years of Experimental Warming Increases the Biodiversity and Productivity of Phytoplankton

    Science.gov (United States)

    Yvon-Durocher, Gabriel; Allen, Andrew P.; Cellamare, Maria; Dossena, Matteo; Gaston, Kevin J.; Leitao, Maria; Montoya, José M.; Reuman, Daniel C.; Woodward, Guy; Trimmer, Mark

    2015-01-01

    Phytoplankton are key components of aquatic ecosystems, fixing CO2 from the atmosphere through photosynthesis and supporting secondary production, yet relatively little is known about how future global warming might alter their biodiversity and associated ecosystem functioning. Here, we explore how the structure, function, and biodiversity of a planktonic metacommunity was altered after five years of experimental warming. Our outdoor mesocosm experiment was open to natural dispersal from the regional species pool, allowing us to explore the effects of experimental warming in the context of metacommunity dynamics. Warming of 4°C led to a 67% increase in the species richness of the phytoplankton, more evenly-distributed abundance, and higher rates of gross primary productivity. Warming elevated productivity indirectly, by increasing the biodiversity and biomass of the local phytoplankton communities. Warming also systematically shifted the taxonomic and functional trait composition of the phytoplankton, favoring large, colonial, inedible phytoplankton taxa, suggesting stronger top-down control, mediated by zooplankton grazing played an important role. Overall, our findings suggest that temperature can modulate species coexistence, and through such mechanisms, global warming could, in some cases, increase the species richness and productivity of phytoplankton communities. PMID:26680314

  18. Publications as an indicator of increased tobacco control research productivity (quantity and quality) in New Zealand.

    Science.gov (United States)

    Kira, Anette; Glover, Marewa; Bullen, Chris; Viehbeck, Sarah

    2011-06-01

    Tobacco control (TC) research capacity and productivity are critical for developing evidence-informed interventions that will reduce the harmful effects of smoking. The aim of this paper was to investigate New Zealand's (NZ) TC research capacity along with the quantity and quality of publications, following two government initiatives aimed, in part, at improving the quantity and quality of NZ TC research. Scopus was searched for articles with at least one NZ author and where the topic was of primary relevance to TC. Publications were organized into two time periods, following the government initiatives, 1993-2003 and 2004-2009. We analyzed the number of publications, publication journals, type of publications, impact (using the impact factor), and authorship. There has been an increase in number and impact of publications and number of authors. The number of publications has increased from an average of 14 (1994-2003) to 38 per year (2004-2009). The number of journals published increased from 64 to 86. The impact during 2004-2009 was almost threefold than in 1993-2003. The number of authors increased from 212 to 345, and the number of authors who had at least one first-authored publication increased from 80 to 124. These results show an encouraging trend in NZ TC research, with an increase in research productivity, quality, and in research capacity. It is possible that government-initiated and -funded infrastructural support contributed to increasing needed TC research, which supports the worth of such initiatives.

  19. Enhanced interannual precipitation variability increases plant functional diversity that in turn ameliorates negative impact on productivity.

    Science.gov (United States)

    Gherardi, Laureano A; Sala, Osvaldo E

    2015-12-01

    Although precipitation interannual variability is projected to increase due to climate change, effects of changes in precipitation variance have received considerable less attention than effects of changes in the mean state of climate. Interannual precipitation variability effects on functional diversity and its consequences for ecosystem functioning are assessed here using a 6-year rainfall manipulation experiment. Five precipitation treatments were switched annually resulting in increased levels of precipitation variability while maintaining average precipitation constant. Functional diversity showed a positive response to increased variability due to increased evenness. Dominant grasses decreased and rare plant functional types increased in abundance because grasses showed a hump-shaped response to precipitation with a maximum around modal precipitation, whereas rare species peaked at high precipitation values. Increased functional diversity ameliorated negative effects of precipitation variability on primary production. Rare species buffered the effect of precipitation variability on the variability in total productivity because their variance decreases with increasing precipitation variance. © 2015 John Wiley & Sons Ltd/CNRS.

  20. Pulsed Power Production of Ozone in 02/N2 iin a Coaxial Reactor without Dielectric Layer

    OpenAIRE

    Samaranayake, W. J. M.; Miyahara, Y.; Namihira, T.; Katsuki, S.; Hackam, R.; Akiyama, H.; ミヤハラ, Y.; ナミヒラ, タカオ; カツキ, スナオ; アキヤマ, ヒデノリ; 浪平, 隆男; 勝木, 淳; 秋山, 秀典

    2001-01-01

    Very short duration pulsed streamer discharges have been used to produce ozone in a gas mixture of nitrogen and oxygen at atmospheric pressure. The ratio of nitrogen to oxygen in the mixture was varied in the range from 2.5/0.5 to 0.5/2.5, while maintaining a total flow rate of 3 l/min. The production of ozone was found to be higher for a specific mixture ratio of N2/O2 than that in oxygen or in dry air. The production of ozone in O2 was higher than that in dry air. The production yield of oz...

  1. Modelling of impurity production and transport in the scrape-off layer of a high density limiter tokamak

    International Nuclear Information System (INIS)

    Zagorski, R.; Romanelli, F.

    1996-01-01

    A simple analytical model is presented that describes impurity ion production and transport in the tokamak scrape-off layer (SOL). The equations of the model are solved analytically in the test particle approximation. The solution, as a function of different plasma parameters and target materials, is discussed in the case in which the background plasma is described by the simple SOL model and a comparison between the model and the numerical results of a 2-D multifluid code is presented. (author). 18 refs, 8 figs, 2 tabs

  2. Increased riboflavin production from activated bleaching earth by a mutant strain of Ashbya gossypii.

    Science.gov (United States)

    Tajima, Satoshi; Itoh, Yoko; Sugimoto, Takashi; Kato, Tatsuya; Park, Enoch Y

    2009-10-01

    The production of riboflavin from vegetable oil was increased using a mutant strain of Ashbya gossypii. This mutant was generated by treating the wild-type strain with N-methyl-N'-nitro-N-nitrosoguanidine (MNNG). Riboflavin production was 10-fold higher in the mutant compared to the wild-type strain. The specific intracellular catalase activity after 3 d of culture was 6-fold higher in the mutant than in the wild-type strain. For the mutant, riboflavin production in the presence of 40 mM hydrogen peroxide was 16% less than that in the absence of hydrogen peroxide, whereas it was 56% less for the wild-type strain. The isocitrate lyase (ICL) activity of the mutant was 0.26 mU/mg of protein during the active riboflavin production phase, which was 2.6-fold higher than the wild-type strain. These data indicate that the mutant utilizes the carbon flux from the TCA cycle to the glyoxylate cycle more efficiently than the wild-type strain, resulting in enhanced riboflavin production. This novel mutant has the potential to be of use for industrial-scale riboflavin production from waste-activated bleaching earth (ABE), thereby transforming a useless material into a valuable bioproduct.

  3. Co-digestion of cattle manure with food waste and sludge to increase biogas production

    International Nuclear Information System (INIS)

    Marañón, E.; Castrillón, L.; Quiroga, G.; Fernández-Nava, Y.; Gómez, L.; García, M.M.

    2012-01-01

    Highlights: ► Small increase in methane production was observed applying sonication pretreatment. ► Biogas productions between 720 and 1100 mL/Lreactor day were achieved. ► Volatile solids removal efficiencies ranged between 53% and 60%. ► Lower methane yields were obtained when operating under thermophilic conditions. ► Optimum OLR in lab-scale CSTR was 1.2–1.3 g VS/L day (HRT: 20 days). - Abstract: Anaerobic co-digestion strategies are needed to enhance biogas production, especially when treating certain residues such as cattle/pig manure. This paper presents a study of co-digestion of cattle manure with food waste and sewage sludge. With the aim of maximising biogas yields, a series of experiments were carried out under mesophilic and thermophilic conditions using continuously stirred-tank reactors, operating at different hydraulic residence times. Pretreatment with ultrasound was also applied to compare the results with those obtained with non-pretreated waste. Specific methane production decreases when increasing the OLR and decreasing HRT. The maximum value obtained was 603 LCH 4 /kg VS feed for the co-digestion of a mixture of 70% manure, 20% food waste and 10% sewage sludge (total solid concentration around 4%) at 36 °C, for an OLR of 1.2 g VS/L day. Increasing the OLR to 1.5 g VS/L day led to a decrease of around 20–28% in SMP. Lower methane yields were obtained when operating at 55 °C. The increase in methane production when applying ultrasound to the feed mixtures does not compensate for the energy spent in this pretreatment.

  4. Co-digestion of cattle manure with food waste and sludge to increase biogas production

    Energy Technology Data Exchange (ETDEWEB)

    Maranon, E., E-mail: emara@uniovi.es [Department of Chemical Engineering and Environmental Technology, University Institute of Technology of Asturias, Campus of Gijon, University of Oviedo, 33203 Gijon (Spain); Castrillon, L.; Quiroga, G.; Fernandez-Nava, Y. [Department of Chemical Engineering and Environmental Technology, University Institute of Technology of Asturias, Campus of Gijon, University of Oviedo, 33203 Gijon (Spain); Gomez, L.; Garcia, M.M. [Zero Emissions Technology, 41018 Seville (Spain)

    2012-10-15

    Highlights: Black-Right-Pointing-Pointer Small increase in methane production was observed applying sonication pretreatment. Black-Right-Pointing-Pointer Biogas productions between 720 and 1100 mL/Lreactor day were achieved. Black-Right-Pointing-Pointer Volatile solids removal efficiencies ranged between 53% and 60%. Black-Right-Pointing-Pointer Lower methane yields were obtained when operating under thermophilic conditions. Black-Right-Pointing-Pointer Optimum OLR in lab-scale CSTR was 1.2-1.3 g VS/L day (HRT: 20 days). - Abstract: Anaerobic co-digestion strategies are needed to enhance biogas production, especially when treating certain residues such as cattle/pig manure. This paper presents a study of co-digestion of cattle manure with food waste and sewage sludge. With the aim of maximising biogas yields, a series of experiments were carried out under mesophilic and thermophilic conditions using continuously stirred-tank reactors, operating at different hydraulic residence times. Pretreatment with ultrasound was also applied to compare the results with those obtained with non-pretreated waste. Specific methane production decreases when increasing the OLR and decreasing HRT. The maximum value obtained was 603 LCH{sub 4}/kg VS{sub feed} for the co-digestion of a mixture of 70% manure, 20% food waste and 10% sewage sludge (total solid concentration around 4%) at 36 Degree-Sign C, for an OLR of 1.2 g VS/L day. Increasing the OLR to 1.5 g VS/L day led to a decrease of around 20-28% in SMP. Lower methane yields were obtained when operating at 55 Degree-Sign C. The increase in methane production when applying ultrasound to the feed mixtures does not compensate for the energy spent in this pretreatment.

  5. Diverse urban plantings managed with sufficient resource availability can increase plant productivity and arthropod diversity

    Directory of Open Access Journals (Sweden)

    Jonathon eMuller

    2014-10-01

    Full Text Available Buildings structures and surfaces are explicitly being used to grow plants, and these ‘urban plantings’ are typically designed for aesthetic value. Urban plantings also have the potential to contribute significant ‘ecological values’ by increasing urban habitat for animals such as arthropods and by increasing plant productivity. In this study, we evaluated how the provision of these additional ecological values is affected by plant species richness; the availability of essential resources for plants, such as water, light, space; and soil characteristics. We sampled 33 plantings located on the exterior of three buildings in the urban centre of Brisbane, Australia (subtropical climatic region over two, six week sampling periods characterised by different temperature and rainfall conditions. Plant cover was estimated as a surrogate for productivity as destructive sampling of biomass was not possible. We measured weekly light levels (photosynthetically active radiation, plant CO2 assimilation, soil CO2 efflux, and arthropod diversity.Differences in plant cover were best explained by a three-way interaction of plant species richness, management water regime and sampling period. As the richness of plant species increased in a planter, productivity and total arthropod richness also increased significantly - likely due to greater habitat heterogeneity and quality. Overall we found urban plantings can provide additional ecological values if essential resources are maintained within a planter such as water, light and soil temperature. Diverse urban plantings that are managed with these principles in mind can contribute to the attraction of diverse arthropod communities, and lead to increased plant productivity within a dense urban context.

  6. Introducing extra NADPH consumption ability significantly increases the photosynthetic efficiency and biomass production of cyanobacteria.

    Science.gov (United States)

    Zhou, Jie; Zhang, Fuliang; Meng, Hengkai; Zhang, Yanping; Li, Yin

    2016-11-01

    Increasing photosynthetic efficiency is crucial to increasing biomass production to meet the growing demands for food and energy. Previous theoretical arithmetic analysis suggests that the light reactions and dark reactions are imperfectly coupled due to shortage of ATP supply, or accumulation of NADPH. Here we hypothesized that solely increasing NADPH consumption might improve the coupling of light reactions and dark reactions, thereby increasing the photosynthetic efficiency and biomass production. To test this hypothesis, an NADPH consumption pathway was constructed in cyanobacterium Synechocystis sp. PCC 6803. The resulting extra NADPH-consuming mutant grew much faster and achieved a higher biomass concentration. Analyses of photosynthesis characteristics showed the activities of photosystem II and photosystem I and the light saturation point of the NADPH-consuming mutant all significantly increased. Thus, we demonstrated that introducing extra NADPH consumption ability is a promising strategy to increase photosynthetic efficiency and to enable utilization of high-intensity lights. Copyright © 2016 International Metabolic Engineering Society. Published by Elsevier Inc. All rights reserved.

  7. Grain production trends in Russia, Ukraine and Kazakhstan: New opportunities in an increasingly unstable world?

    Science.gov (United States)

    Lioubimtseva, Elena; Henebry, Geoffrey M.

    2012-06-01

    Grain production in the countries of the former USSR sharply declined during the past two decades and has only recently started to recover. In the context of the current economic and food-price crisis, Russia, Ukraine, and Kazakhstan might be presented with a window of opportunity to reemerge on the global agricultural market, if they succeed in increasing their productivity. The future of their agriculture, however, is highly sensitive to a combination of internal and external factors, such as institutional changes, land-use changes, climate variability and change, and global economic trends. The future of this region's grain production is likely to have a significant impact on the global and regional food security over the next decades.

  8. Initial stresses in two-layer metal domes due to imperfections of their production and assemblage

    Directory of Open Access Journals (Sweden)

    Lebed Evgeniy Vasil’evich

    2015-04-01

    Full Text Available The process of construction of two-layer metal domes is analyzed to illustrate the causes of initial stresses in the bars of their frames. It has been noticed that it is impossible to build such structures with ideal geometric parameters because of imperfections caused by objective reasons. These imperfections cause difficulties in the process of connection of the elements in the joints. The paper demonstrates the necessity of fitting operations during assemblage that involve force fitting and yield initial stresses due to imperfections. The authors propose a special method of computer modeling of enforced elimination of possible imperfections caused by assemblage process and further confirm the method by an analysis of a concrete metal dome.

  9. Editors' Choice Growth of Layered WS2Electrocatalysts for Highly Efficient Hydrogen Production Reaction

    KAUST Repository

    Alsabban, Merfat M.

    2016-08-18

    Seeking more economical alternative electrocatalysts without sacrificing much in performance to replace precious metal Pt is one of the major research topics in hydrogen evolution reactions (HER). Tungsten disulfide (WS2) has been recognized as a promising substitute for Pt owing to its high efficiency and low-cost. Since most existing works adopt solution-synthesized WS2 crystallites for HER, direct growth of WS2 layered materials on conducting substrates should offer new opportunities. The growth of WS2 by the thermolysis of ammonium tetrathiotungstate (NH4)(2)WS4 was examined under various gaseous environments. Structural analysis and electrochemical studies show that the H2S environment leads to the WS2 catalysts with superior HER performance with an extremely low overpotential (eta(10) = 184 mV). (C) The Author(s) 2016. Published by ECS. All rights reserved.

  10. Editors' Choice Growth of Layered WS2Electrocatalysts for Highly Efficient Hydrogen Production Reaction

    KAUST Repository

    Alsabban, Merfat M.; Min, Shixiong; Hedhili, Mohamed N.; Ming, Jun; Li, Lain-Jong; Huang, Kuo-Wei

    2016-01-01

    Seeking more economical alternative electrocatalysts without sacrificing much in performance to replace precious metal Pt is one of the major research topics in hydrogen evolution reactions (HER). Tungsten disulfide (WS2) has been recognized as a promising substitute for Pt owing to its high efficiency and low-cost. Since most existing works adopt solution-synthesized WS2 crystallites for HER, direct growth of WS2 layered materials on conducting substrates should offer new opportunities. The growth of WS2 by the thermolysis of ammonium tetrathiotungstate (NH4)(2)WS4 was examined under various gaseous environments. Structural analysis and electrochemical studies show that the H2S environment leads to the WS2 catalysts with superior HER performance with an extremely low overpotential (eta(10) = 184 mV). (C) The Author(s) 2016. Published by ECS. All rights reserved.

  11. Spectral fitting, shock layer modeling, and production of nitrogen oxides and excited nitrogen

    Science.gov (United States)

    Blackwell, H. E.

    1991-01-01

    An analysis was made of N2 emission from 8.72 MJ/kg shock layer at 2.54, 1.91, and 1.27 cm positions and vibrational state distributions, temperatures, and relative electronic state populations was obtained from data sets. Other recorded arc jet N2 and air spectral data were reviewed and NO emission characteristics were studied. A review of operational procedures of the DSMC code was made. Information on other appropriate codes and modifications, including ionization, were made as well as a determination of the applicability of codes reviewed to task requirement. A review was also made of computational procedures used in CFD codes of Li and other codes on JSC computers. An analysis was made of problems associated with integration of specific chemical kinetics applicable to task into CFD codes.

  12. Deletion of Type I glutamine synthetase deregulates nitrogen metabolism and increases ethanol production in Clostridium thermocellum

    Energy Technology Data Exchange (ETDEWEB)

    Rydzak, Thomas [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Biosciences Division, BioEnergy Science Center; Garcia, David [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Biosciences Division, BioEnergy Science Center; Stevenson, David M. [Univ. of Wisconsin, Madison, WI (United States). Dept. of Bacteriology; Sladek, Margaret [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Biosciences Division, BioEnergy Science Center; Klingeman, Dawn M. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Biosciences Division, BioEnergy Science Center; Holwerda, Evert K. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Biosciences Division; Dartmouth College, Hanover, NH (United States). Thayer School of Engineering; Amador-Noguez, Daniel [Univ. of Wisconsin, Madison, WI (United States). Dept. of Bacteriology; Brown, Steven D. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Biosciences Division, BioEnergy Science Center; Guss, Adam M. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Biosciences Division, BioEnergy Science Center

    2017-05-01

    Clostridium thermocellum rapidly deconstructs cellulose and ferments resulting hydrolysis products into ethanol and other products, and is thus a promising platform organism for the development of cellulosic biofuel production via consolidated bioprocessing. And while recent metabolic engineering strategies have targeted eliminating canonical fermentation products (acetate, lactate, formate, and H2), C. thermocellum also secretes amino acids, which has limited ethanol yields in engineered strains to approximately 70% of the theoretical maximum. To decrease amino acid secretion, we attempted to reduce ammonium assimilation by deleting the Type I glutamine synthetase (glnA) in C. thermocellum. Deletion of glnA reduced levels of secreted valine and total amino acids by 53% and 44% respectively, and increased ethanol yields by 53%. RNA-seq analysis revealed that genes encoding the RNF-complex were more highly expressed in ΔglnA and may have a role in improving NADH-availability for ethanol production. While a significant up-regulation of genes involved in nitrogen assimilation and urea uptake suggested that deletion of glnA induces a nitrogen starvation response, metabolomic analysis showed an increase in intracellular glutamine and α-ketoglutarate levels indicative of nitrogen-rich conditions. Here, we propose that deletion of glnA causes deregulation of nitrogen metabolism, leading to overexpression of nitrogen metabolism genes and, in turn, elevated glutamine/α-ketoglutarate levels. Here we demonstrate that perturbation of nitrogen assimilation is a promising strategy to redirect flux from the production of nitrogenous compounds toward biofuels in C. thermocellum.

  13. Increasing off-service resident productivity while on their emergency department rotation using shift cards.

    Science.gov (United States)

    Chakravarthy, Bharath; Posadas, Emerson; Ibrahim, Deena; McArthur, Kurt; Osborn, Megan; Hoonpongsimanont, Wirachin; Wong, Andrew; Lotfipour, Shahram

    2015-04-01

    Differences in productivity between off-service residents rotating in the emergency department (ED) and their emergency medicine (EM) resident counterparts have never been directly quantified. We sought to quantify the difference between off-service residents rotating in the ED and their EM resident counterparts. We also sought to find whether shift cards could be used to increase the productivity of off-service residents rotating in the ED. This is a prospective cohort study conducted at an urban, tertiary, Level I trauma center. We implemented the use of shift cards for off-service residents during their EM rotation. Completion of the shift card involved recording patients seen and their dispositions, procedures done, and documenting a learned bedside teaching point from their shift that day. Productivity was measured in terms of patients seen per hour (PPH) and relative value units per hour (RVU/h). Off-service residents showed a productivity of 0.529 PPH (95% confidence interval [CI] 0.493-0.566) and 1.40 RVU/h (95% CI 1.28-1.53) prior to implementation of shift cards. With the introduction of shift cards, productivity increased to 0.623 PPH (95% CI 0.584-0.663, p = 0.001) and 1.77 RVU/h (95% CI 1.64-1.91, p = 0.001). In comparison, first year EM resident productivity was 0.970 PPH (95% CI 0.918-1.02) and 3.01 RVU/h (95% CI 2.83-3.19). Shift cards can be used to foster motivation for off-service residents rotating in the ED, and is a simple and cost-effective method to improve system-based practices and utilization of resources. Copyright © 2015 Elsevier Inc. All rights reserved.

  14. Deletion of Type I glutamine synthetase deregulates nitrogen metabolism and increases ethanol production in Clostridium thermocellum.

    Science.gov (United States)

    Rydzak, Thomas; Garcia, David; Stevenson, David M; Sladek, Margaret; Klingeman, Dawn M; Holwerda, Evert K; Amador-Noguez, Daniel; Brown, Steven D; Guss, Adam M

    2017-05-01

    Clostridium thermocellum rapidly deconstructs cellulose and ferments resulting hydrolysis products into ethanol and other products, and is thus a promising platform organism for the development of cellulosic biofuel production via consolidated bioprocessing. While recent metabolic engineering strategies have targeted eliminating canonical fermentation products (acetate, lactate, formate, and H 2 ), C. thermocellum also secretes amino acids, which has limited ethanol yields in engineered strains to approximately 70% of the theoretical maximum. To investigate approaches to decrease amino acid secretion, we attempted to reduce ammonium assimilation by deleting the Type I glutamine synthetase (glnA) in an essentially wild type strain of C. thermocellum. Deletion of glnA reduced levels of secreted valine and total amino acids by 53% and 44% respectively, and increased ethanol yields by 53%. RNA-seq analysis revealed that genes encoding the RNF-complex were more highly expressed in ΔglnA and may have a role in improving NADH-availability for ethanol production. While a significant up-regulation of genes involved in nitrogen assimilation and urea uptake suggested that deletion of glnA induces a nitrogen starvation response, metabolomic analysis showed an increase in intracellular glutamine levels indicative of nitrogen-rich conditions. We propose that deletion of glnA causes deregulation of nitrogen metabolism, leading to overexpression of nitrogen metabolism genes and, in turn, elevated glutamine levels. Here we demonstrate that perturbation of nitrogen assimilation is a promising strategy to redirect flux from the production of nitrogenous compounds toward biofuels in C. thermocellum. Copyright © 2017. Published by Elsevier Inc.

  15. Hydrogen sulfide increases nitric oxide production from endothelial cells by an Akt-dependent mechanism

    Directory of Open Access Journals (Sweden)

    Arturo J Cardounel

    2011-12-01

    Full Text Available Hydrogen sulfide (H2S and nitric oxide (NO are both gasotransmitters that can elicit synergistic vasodilatory responses in the in the cardiovascular system, but the mechanisms behind this synergy are unclear. In the current study we investigated the molecular mechanisms through which H2S regulates endothelial NO production. Initial studies were performed to establish the temporal and dose-dependent effects of H2S on NO generation using EPR spin trapping techniques. H2S stimulated a two-fold increase in NO production from endothelial nitric oxide synthase (eNOS, which was maximal 30 min after exposure to 25-150 µM H2S. Following 30 min H2S exposure, eNOS phosphorylation at Ser 1177 was significantly increased compared to control, consistent with eNOS activation. Pharmacological inhibition of Akt, the kinase responsible for Ser 1177 phosphorylation, attenuated the stimulatory effect of H2S on NO production. Taken together, these data demonstrate that H2S up-regulates NO production from eNOS through an Akt-dependent mechanism. These results implicate H2S in the regulation of NO in endothelial cells, and suggest that deficiencies in H2S signaling can directly impact processes regulated by NO.

  16. Environmental and economic impacts of livestock productivity increase in sub-Saharan Africa.

    Science.gov (United States)

    Cardoso, Luis Alfaro

    2012-12-01

    Livestock production in sub-Saharan Africa (SSA) is not matching the annual 2.5 % growth of its population. Regional per capita meat and milk production corresponds, respectively, to about 13 and 8 % of developed countries indicators. Livestock performances in this region have decreased within the last 30 years. In fact, SSA, with a 12 % bovine extraction rate against a world average of 21 %, includes about 16 % of world cattle, only producing 6 and 2.6 % of global meat and milk, respectively. These low performances have economic and environmental consequences reflecting the necessity for upgrading livestock managing skills in the region. This effort includes various components such as sanitary prophylaxis, reproduction, nutrition, and in particular, substantial increase in livestock yield for human consumption. This will allow for an improved animal and pasture management and soil preservation, enhancing meat production and decreasing methane and nitrogen emissions from enteric fermentation and manure processing. These environmental gains due to increased livestock off-take rates can represent relevant credits in the global Environmental Carbon Market under the United Nations Framework Convention on Climate Change Kyoto protocol. These credits can be used for investments in livestock essential services and marketing facilities leading to improved productivity.

  17. Climate change impacts on agricultural water management: Challenge for increasing crop productivity in Serbia

    Directory of Open Access Journals (Sweden)

    Đuričin Sonja

    2016-01-01

    Full Text Available Years which are encompassed by the research, according to the mean daily air temperatures and precipitation, were characterized by the frequent occurrence of extremely warm and dry vegetation periods. The aim of the research is to estimate the economic viability of the production of maize, potatoes and tomatoes in terms of FI (full irrigation. The assessment of the economic viability of the application of the irrigation system when it comes to maize and potato production is done on the basis of a comparative analysis of the realized profit in the natural water regime and FI, whereas in the case of greenhouse tomato production it is done on the basis of comparative analysis of profit achieved in terms of RDI (regulated deficit irrigation and FI. The research results indicate a positive economic effect of the irrigation system implementation because in our climate the water needs of a culture cannot be satisfied solely by precipitation, and thus water deficit occurs. This lack of rainfall causes yield reduction because it is the main parameter which increases the production profitability. Therefore, increasing the area under irrigation is very important.

  18. Increased light-use efficiency sustains net primary productivity of shaded coffee plants in agroforestry system.

    Science.gov (United States)

    Charbonnier, Fabien; Roupsard, Olivier; le Maire, Guerric; Guillemot, Joannès; Casanoves, Fernando; Lacointe, André; Vaast, Philippe; Allinne, Clémentine; Audebert, Louise; Cambou, Aurélie; Clément-Vidal, Anne; Defrenet, Elsa; Duursma, Remko A; Jarri, Laura; Jourdan, Christophe; Khac, Emmanuelle; Leandro, Patricia; Medlyn, Belinda E; Saint-André, Laurent; Thaler, Philippe; Van Den Meersche, Karel; Barquero Aguilar, Alejandra; Lehner, Peter; Dreyer, Erwin

    2017-08-01

    In agroforestry systems, shade trees strongly affect the physiology of the undergrown crop. However, a major paradigm is that the reduction in absorbed photosynthetically active radiation is, to a certain extent, compensated by an increase in light-use efficiency, thereby reducing the difference in net primary productivity between shaded and non-shaded plants. Due to the large spatial heterogeneity in agroforestry systems and the lack of appropriate tools, the combined effects of such variables have seldom been analysed, even though they may help understand physiological processes underlying yield dynamics. In this study, we monitored net primary productivity, during two years, on scales ranging from individual coffee plants to the entire plot. Absorbed radiation was mapped with a 3D model (MAESPA). Light-use efficiency and net assimilation rate were derived for each coffee plant individually. We found that although irradiance was reduced by 60% below crowns of shade trees, coffee light-use efficiency increased by 50%, leaving net primary productivity fairly stable across all shade levels. Variability of aboveground net primary productivity of coffee plants was caused primarily by the age of the plants and by intraspecific competition among them (drivers usually overlooked in the agroforestry literature) rather than by the presence of shade trees. © 2017 John Wiley & Sons Ltd.

  19. Biodiesel Reactor Design with Glycerol Separation to Increase Biodiesel Production Yield

    Directory of Open Access Journals (Sweden)

    Budy Rahmat

    2013-09-01

    Full Text Available The study consisted of reactor design used for transesterification process, effect of glycerol separation ontransesterification reaction, determination of biodiesel quality, and mass balance analysis. The reactor was designed byintegrating circulated pump/stirrer, static mixer, and sprayer that intensify the reaction in the outer tank reactor. The objective was to reduce the use of methanol in excess and to shorten the processing time. The results showed that thereactor that applied the glycerol separation was able to compensate for the decreased use of the reactant methanol from 6:1 to 5:1 molar ratio, and changed the mass balance in the product, including: (i the increase of biodiesel productionfrom 42.37% to 49.34%, and (ii the reduction of methanol in excess from 42.37% to 32.89%. The results suggested that the efficiency of biodiesel production could be increased with the glycerol separation engineering.

  20. Bioaugmentation as a solution to increase methane production from an ammonia-rich substrate

    DEFF Research Database (Denmark)

    Fotidis, Ioannis; Wang, Han; Fiedel, Nicolai Russell

    2014-01-01

    production yield. To date there are not any reliable methods to alleviate the ammonia toxicity effect and/or to efficiently digest ammonia-rich waste. In the current study, bioaugmentation as a possible method to alleviate ammonia toxicity effect in a mesophilic continuously stirred-tank reactor (CSTR......) operating under “inhibited steady state” was tested. A fast growing hydrogenotrophic methanogen (i.e. Methanoculleus bourgensis MS2T) was bioaugmented in the CSTR reactor at high ammonia levels (5 g NH4+-N L-1). A second CSTR reactor used as control with no bioaugmentation. The results derived from...... this study clearly demonstrated a 31.3% increase in methane production yield in the CSTR reactor, at steady-state, after bioaugmentation. Additionally, high-throughput 16S rRNA gene sequencing analysis showed a fivefold increase in relative abundance of Methanoculleus spp. after bioaugmentation. On contrary...

  1. A positive feedback-based gene circuit to increase the production of a membrane protein

    Directory of Open Access Journals (Sweden)

    Gennis Robert B

    2010-05-01

    Full Text Available Abstract Background Membrane proteins are an important class of proteins, playing a key role in many biological processes, and are a promising target in pharmaceutical development. However, membrane proteins are often difficult to produce in large quantities for the purpose of crystallographic or biochemical analyses. Results In this paper, we demonstrate that synthetic gene circuits designed specifically to overexpress certain genes can be applied to manipulate the expression kinetics of a model membrane protein, cytochrome bd quinol oxidase in E. coli, resulting in increased expression rates. The synthetic circuit involved is an engineered, autoinducer-independent variant of the lux operon activator LuxR from V. fischeri in an autoregulatory, positive feedback configuration. Conclusions Our proof-of-concept experiments indicate a statistically significant increase in the rate of production of the bd oxidase membrane protein. Synthetic gene networks provide a feasible solution for the problem of membrane protein production.

  2. Main problems of increasing labour productivity in the power plant construction

    International Nuclear Information System (INIS)

    Falaleev, P.P.

    1984-01-01

    The reserve for labour productivity growth in power-, industrial- and civil engineering in the USSR Minenergo system are discussed. Such reserve comprises: introduction of effective designs, increase of technological readiness of structures; a higher mechanization level in construction, improvement of industrial organization, economical and social aspects. Decrease of labour inputs in NPP construction will be attained by using unified designs of serial WWER-1000, RBMK-1000- and RBMK-1500 reactors as well as by developing nuclear power construction complexes-industrial-construction enterprises for manufacturing and transport of special structures as well as for performing civil engineering and installation work on the ground part of the reactor building and special structure. Other potentialities for increasing labour productivity in NPP construction are considered

  3. Against the Odds – The Marketing Dilemma of Physical Products in an Increasingly Virtual World.

    OpenAIRE

    Oestreicher, Klaus

    2011-01-01

    The overarching battle between the physical place and the virtual space is part of an intensive discussion. Much related literature addresses exemplarily the dilemma of the global Home Entertainment Industry and its struggle to compete with its physical product of optical discs against virtual services of dematerialised downloads. With regard to effects on an increasing number of further industries in the near future an additional question is, how marketing strategies and tactics in a declini...

  4. Growth and biomass productivity of Scenedesmus vacuolatus on a twin layer system and a comparison with other types of cultivations.

    Science.gov (United States)

    Carbone, Dora Allegra; Olivieri, Giuseppe; Pollio, Antonino; Gabriele; Melkonian, Michael

    2017-12-01

    Scenedesmus is a genus of microalgae employed for several industrial uses. Industrial cultivations are performed in open ponds or in closed photobioreactors (PBRs). In the last years, a novel type of PBR based on immobilized microalgae has been developed termed porous substrate photobioreactors (PSBR) to achieve significant higher biomass density during cultivation in comparison to classical PBRs. This work presents a study of the growth of Scenedesmus vacuolatus in a Twin Layer System PSBR at different light intensities (600 μmol photons m -2  s -1 or 1000 μmol photons m -2  s -1 ), different types and concentrations of the nitrogen sources (nitrate or urea), and at two CO 2 levels in the gas phase (2% or 0.04% v/v). The microalgal growth was followed by monitoring the attached biomass density as dry weight, the specific growth rate and pigment accumulation. The highest productivity (29 g m -2 d -1 ) was observed at a light intensity of 600 μmol photons m -2  s -1 and 2% CO 2 . The types and concentrations of nitrogen sources did not influence the biomass productivity. Instead, the higher light intensity of 1000 μmol photons m -2  s -1 and an ambient CO 2 concentration (0.04%) resulted in a significant decrease of productivity to 18 and 10-12 g m -2 d -1 , respectively. When compared to the performance of similar cultivation systems (15-30 g m -2 d -1 ), these results indicate that the Twin Layer cultivation System is a competitive technique for intensified microalgal cultivation in terms of productivity and, at the same time, biomass density.

  5. Increasing EFL Learners’ Oral Production at a Public School Through Project-Based Learning

    Directory of Open Access Journals (Sweden)

    Ady Marcela Vaca Torres

    2017-07-01

    Full Text Available This research study examined how a group of ninth graders enhanced the speaking skill in an English as a foreign language classroom through project-based learning. Data about the experience were collected through field notes, transcripts of learners’ oral performance, and one interview. Grounded theory was implemented for data analysis, out of which three main findings emerged: (1 project-based learning encouraged students to increase oral production through lexical competence development, (2 helped them to overcome fears of speaking in L2, and (3, increased their interest in learning about their school life and community.

  6. Increasing ethanol productivity during xylose fermentation by cell recycling of recombinant Saccharomyces cerevisiae

    DEFF Research Database (Denmark)

    Roca, Christophe Francois Aime; Olsson, Lisbeth

    2003-01-01

    The influence of cell recycling of xylose-fermenting Saccharomyces cerevisiae TMB3001 was investigated during continuous cultivation on a xylose-glucose mixture. By using cell recycling at the dilution rate (D) of 0.05 h(-1), the cell-mass concentration could be increased from 2.2 g l(-1) to 22 g l...... ethanol productivity was in the range of 0.23-0.26 g g(-1) h(-1) with or without cell recycling, showing that an increased cell-mass concentration did not influence the efficiency of the yeast....

  7. Exploring the Potential for Increased Production from the Wave Energy Converter Lifesaver by Reactive Control

    Directory of Open Access Journals (Sweden)

    Marta Molinas

    2013-07-01

    Full Text Available Fred Olsen is currently testing their latest wave energy converter (WEC, Lifesaver, outside of Falmouth Bay in England, preparing it for commercial operation at the Wavehub test site. Previous studies, mostly focusing on hydrodynamics and peak to average power reduction, have shown that this device has potential for increased power extraction using reactive control. This article extends those analyses, adding a detailed model of the all-electric power take-off (PTO system, consisting of a permanent magnet synchronous generator, inverter and DC-link. Time domain simulations are performed to evaluate the PTO capabilities of the modeled WEC. However, when tuned towards reactive control, the generator losses become large, giving a very low overall system efficiency. Optimal control with respect to electrical output power is found to occur with low added mass, and when compared to pure passive loading, a 1% increase in annual energy production is estimated. The main factor reducing the effect of reactive control is found to be the minimum load-force constraint of the device. These results suggest that the Lifesaver has limited potential for increased production by reactive control. This analysis is nevertheless valuable, as it demonstrates how a wave-to-wire model can be used for investigation of PTO potential, annual energy production estimations and evaluations of different control techniques for a given WEC device.

  8. Oleic, linoleic and linolenic acids increase ros production by fibroblasts via NADPH oxidase activation.

    Directory of Open Access Journals (Sweden)

    Elaine Hatanaka

    Full Text Available The effect of oleic, linoleic and γ-linolenic acids on ROS production by 3T3 Swiss and Rat 1 fibroblasts was investigated. Using lucigenin-amplified chemiluminescence, a dose-dependent increase in extracellular superoxide levels was observed during the treatment of fibroblasts with oleic, linoleic and γ-linolenic acids. ROS production was dependent on the addition of β-NADH or NADPH to the medium. Diphenyleneiodonium inhibited the effect of oleic, linoleic and γ-linolenic acids on fibroblast superoxide release by 79%, 92% and 82%, respectively. Increased levels of p47 (phox phosphorylation due to fatty acid treatment were detected by Western blotting analyses of fibroblast proteins. Increased p47 (phox mRNA expression was observed using real-time PCR. The rank order for the fatty acid stimulation of the fibroblast oxidative burst was as follows: γ-linolenic > linoleic > oleic. In conclusion, oleic, linoleic and γ-linolenic acids stimulated ROS production via activation of the NADPH oxidase enzyme complex in fibroblasts.

  9. Oleic, Linoleic and Linolenic Acids Increase ROS Production by Fibroblasts via NADPH Oxidase Activation

    Science.gov (United States)

    Hatanaka, Elaine; Dermargos, Alexandre; Hirata, Aparecida Emiko; Vinolo, Marco Aurélio Ramirez; Carpinelli, Angelo Rafael; Newsholme, Philip; Armelin, Hugo Aguirre; Curi, Rui

    2013-01-01

    The effect of oleic, linoleic and γ-linolenic acids on ROS production by 3T3 Swiss and Rat 1 fibroblasts was investigated. Using lucigenin-amplified chemiluminescence, a dose-dependent increase in extracellular superoxide levels was observed during the treatment of fibroblasts with oleic, linoleic and γ-linolenic acids. ROS production was dependent on the addition of β-NADH or NADPH to the medium. Diphenyleneiodonium inhibited the effect of oleic, linoleic and γ-linolenic acids on fibroblast superoxide release by 79%, 92% and 82%, respectively. Increased levels of p47phox phosphorylation due to fatty acid treatment were detected by Western blotting analyses of fibroblast proteins. Increased p47phox mRNA expression was observed using real-time PCR. The rank order for the fatty acid stimulation of the fibroblast oxidative burst was as follows: γ-linolenic > linoleic > oleic. In conclusion, oleic, linoleic and γ-linolenic acids stimulated ROS production via activation of the NADPH oxidase enzyme complex in fibroblasts. PMID:23579616

  10. Water and nitrogen use efficiency under limited water supply for maize to increase land productivity

    International Nuclear Information System (INIS)

    Craciun, I.; Craciun, M.

    1995-01-01

    As drought is the main environmental factor limiting productivity, the study of plant response to water deficit has been one of the major research topics. The increasing of maize evapotranspiration ET does not always mean the increase of efficiency because, the brightest ET value does not always mean the highest grain yield value, AS the result of the mechanisms relating to the grain yield and ET which are far from simple. The rain amount and distribution during the reproductive stage is the main meteorological factor in flouncing yield. In our study 1991, the high soil moisture content determines a reduction of maize grain yield, in the wet years due to excess of water under irrigation conditions which normally limits root development as a result of insufficient oxygen for transpiration and lac ha of nitrate formation, the yield response to water deficit of different hybrids is of major importance in production planing. The available water supply would be directed towards fully meeting requirements of the hybrids with the higher K sub y over the restricted area and for the hybrids with a lower K sub y, the overall production will increase by extending the area under irrigation, without fully meeting water requirement provided water deficit do not exceed critical values.1 tab; 9 figs (Author)

  11. Pulsatile hyperglucagonemia fails to increase hepatic glucose production in normal man

    International Nuclear Information System (INIS)

    Paolisso, G.; Scheen, A.J.; Luyckx, A.S.; Lefebvre, P.J.

    1987-01-01

    To study the metabolic effects of pulsatile glucagon administration, six male volunteers were submitted to a 260-min glucose-controlled glucose intravenous infusion using the Biostator. The endogenous secretion of the pancreatic hormones was inhibited by somatostatin, basal insulin secretion was replaced by a continuous insulin infusion, and glucagon was infused intravenously in two conditions at random: either continuously or intermittently. Blood glucose levels and glucose infusion rate were monitored continuously by the Biostator, and classical methodology using a D-[3- 3 H]glucose infusion allowed the authors to study glucose turnover. While basal plasma glucagon levels were similar in both conditions, they plateaued at 189 +/- 38 pg ml -1 during continuous infusion and varied between 95 and 501 pg x ml -1 during pulsatile infusion. When compared with continuous administration, pulsatile glucagon infusion 1) initially induced a similar increase in endogenous (hepatic) glucose production and blood glucose, 2) did not prevent the so-called evanescent effect of glucagon on blood glucose, and 3) after 3 h tended to reduce rather than increase hepatic glucose production. In conclusion, in vivo pulsatile hyperglucanemia in normal man fails to increase hepatic glucose production

  12. Expanding and modernising an aluminium plant increases production and reduces environmental pollution; Europas stoerste

    Energy Technology Data Exchange (ETDEWEB)

    Stroem, Knut; Haaland, Leif

    2002-07-01

    At the time of writing, milk cannot be produced closer than 20 km to Norsk Hydro's aluminium factory at Sunndalsoera, Norway. Important environmental improvements are expected as the result of current modernisation and expansion of the factory. The 300 Soederberg cells which have been used for 50 years are being replaced by 340 new electrolysis cells that will produce 1900 kg aluminium per day each. This increases the annual production of aluminium from 66000 tonnes to 328800 tonnes. In addition there will be alloying metal and remelted, which increases the total production to 370000 tonnes when the plant is completed in 2004. At full production in the new plant in addition to the present plant, the electric power requirement increases to 4850 GWh. Although this is a rise in the energy consumption, the energy used per kg of aluminium produced goes down by 23 per cent. Current use of propane and oil will be replaced by liquid gas. When completed, the works will be the biggest aluminium works in Europe and the cleanest ones in the World.

  13. [Increased IL-4 production in response to virulent Mycobacterium tuberculosis in tuberculosis patients with advanced disease].

    Science.gov (United States)

    Ordway, Diane J; Martins, Marta S; Costa, Leonor M; Freire, Mónica S; Arroz, Maria J; Dockrell, Hazel M; Ventura, Fernando A

    2005-01-01

    The study was designed to compare immune responses to Mycobacterium tuberculosis bacilli and antigens in healthy Portuguese subjects and pulmonary tuberculosis patients (TB), and to correlate immune status with clinical severity of tuberculosis disease. PBMC were cultured and stimulated with live and killed M. tuberculosis H37Rv and purified protein derivative (PPD) and lymphoproliferation and production of IFN-gamma and IL-5/IL-4 by these cultures were evaluated by the use of ELISA and multi-parameter flow cytometry. PBMC from 30 tuberculosis patients demonstrated significantly reduced amounts of proliferation and IFN-gamma when stimulated with live M. tuberculosis compared the control group. Of 15 tuberculosis patients tested for intracellular IL-4 following stimulation with M. tuberculosis, 7 showed greatly increased IL-4 production in CD8+ and gammadelta+ T cells. Tuberculosis patients demonstrated an increase of intracellular IL-4 after PBMC were stimulated with live M. tuberculosis in the CD4+ phenotype, but more notably in CD8+ and gammadelta TCR+ subsets. Increased production of IL-4 in tuberculosis patients was primarily in individuals with advanced involvement of lung parenchymal with high bacterial loads in sputum. These results suggest that an alteration in type 1 and type 2 cytokine balance can occur in patients with tuberculosis at an advanced clinical stage of disease.

  14. Increased isobutanol production in Saccharomyces cerevisiae by overexpression of genes in valine metabolism

    Directory of Open Access Journals (Sweden)

    Karhumaa Kaisa

    2011-07-01

    Full Text Available Abstract Background Isobutanol can be a better biofuel than ethanol due to its higher energy density and lower hygroscopicity. Furthermore, the branched-chain structure of isobutanol gives a higher octane number than the isomeric n-butanol. Saccharomyces cerevisiae was chosen as the production host because of its relative tolerance to alcohols, robustness in industrial fermentations, and the possibility for future combination of isobutanol production with fermentation of lignocellulosic materials. Results The yield of isobutanol was improved from 0.16 to 0.97 mg per g glucose by simultaneous overexpression of biosynthetic genes ILV2, ILV3, and ILV5 in valine metabolism in anaerobic fermentation of glucose in mineral medium in S. cerevisiae. Isobutanol yield was further improved by twofold by the additional overexpression of BAT2, encoding the cytoplasmic branched-chain amino-acid aminotransferase. Overexpression of ILV6, encoding the regulatory subunit of Ilv2, in the ILV2 ILV3 ILV5 overexpression strain decreased isobutanol production yield by threefold. In aerobic cultivations in shake flasks in mineral medium, the isobutanol yield of the ILV2 ILV3 ILV5 overexpression strain and the reference strain were 3.86 and 0.28 mg per g glucose, respectively. They increased to 4.12 and 2.4 mg per g glucose in yeast extract/peptone/dextrose (YPD complex medium under aerobic conditions, respectively. Conclusions Overexpression of genes ILV2, ILV3, ILV5, and BAT2 in valine metabolism led to an increase in isobutanol production in S. cerevisiae. Additional overexpression of ILV6 in the ILV2 ILV3 ILV5 overexpression strain had a negative effect, presumably by increasing the sensitivity of Ilv2 to valine inhibition, thus weakening the positive impact of overexpression of ILV2, ILV3, and ILV5 on isobutanol production. Aerobic cultivations of the ILV2 ILV3 ILV5 overexpression strain and the reference strain showed that supplying amino acids in cultivation media

  15. Mycorrhiza symbiosis increases the surface for sunlight capture in Medicago truncatula for better photosynthetic production.

    Directory of Open Access Journals (Sweden)

    Lisa Adolfsson

    Full Text Available Arbuscular mycorrhizal (AM fungi play a prominent role in plant nutrition by supplying mineral nutrients, particularly inorganic phosphate (Pi, and also constitute an important carbon sink. AM stimulates plant growth and development, but the underlying mechanisms are not well understood. In this study, Medicago truncatula plants were grown with Rhizophagus irregularis BEG141 inoculum (AM, mock inoculum (control or with P(i fertilization. We hypothesized that AM stimulates plant growth through either modifications of leaf anatomy or photosynthetic activity per leaf area. We investigated whether these effects are shared with P(i fertilization, and also assessed the relationship between levels of AM colonization and these effects. We found that increased P(i supply by either mycorrhization or fertilization led to improved shoot growth associated with increased nitrogen uptake and carbon assimilation. Both mycorrhized and P(i-fertilized plants had more and longer branches with larger and thicker leaves than the control plants, resulting in an increased photosynthetically active area. AM-specific effects were earlier appearance of the first growth axes and increased number of chloroplasts per cell section, since they were not induced by P(i fertilization. Photosynthetic activity per leaf area remained the same regardless of type of treatment. In conclusion, the increase in growth of mycorrhized and P(i-fertilized Medicago truncatula plants is linked to an increase in the surface for sunlight capture, hence increasing their photosynthetic production, rather than to an increase in the photosynthetic activity per leaf area.

  16. Mycorrhiza Symbiosis Increases the Surface for Sunlight Capture in Medicago truncatula for Better Photosynthetic Production

    Science.gov (United States)

    Adolfsson, Lisa; Keresztes, Áron; Uddling, Johan; Schoefs, Benoît; Spetea, Cornelia

    2015-01-01

    Arbuscular mycorrhizal (AM) fungi play a prominent role in plant nutrition by supplying mineral nutrients, particularly inorganic phosphate (Pi), and also constitute an important carbon sink. AM stimulates plant growth and development, but the underlying mechanisms are not well understood. In this study, Medicago truncatula plants were grown with Rhizophagus irregularis BEG141 inoculum (AM), mock inoculum (control) or with Pi fertilization. We hypothesized that AM stimulates plant growth through either modifications of leaf anatomy or photosynthetic activity per leaf area. We investigated whether these effects are shared with Pi fertilization, and also assessed the relationship between levels of AM colonization and these effects. We found that increased Pi supply by either mycorrhization or fertilization led to improved shoot growth associated with increased nitrogen uptake and carbon assimilation. Both mycorrhized and Pi-fertilized plants had more and longer branches with larger and thicker leaves than the control plants, resulting in an increased photosynthetically active area. AM-specific effects were earlier appearance of the first growth axes and increased number of chloroplasts per cell section, since they were not induced by Pi fertilization. Photosynthetic activity per leaf area remained the same regardless of type of treatment. In conclusion, the increase in growth of mycorrhized and Pi-fertilized Medicago truncatula plants is linked to an increase in the surface for sunlight capture, hence increasing their photosynthetic production, rather than to an increase in the photosynthetic activity per leaf area. PMID:25615871

  17. The Sustainable Release of Vancomycin and Its Degradation Products From Nanostructured Collagen/Hydroxyapatite Composite Layers

    Czech Academy of Sciences Publication Activity Database

    Suchý, Tomáš; Šupová, Monika; Klapková, E.; Horný, L.; Rýglová, Šárka; Žaloudková, Margit; Braun, Martin; Sucharda, Zbyněk; Ballay, R.; Veselý, J.; Chlup, H.; Denk, František

    2016-01-01

    Roč. 105, č. 3 (2016), 1288-1294 ISSN 0022-3549 R&D Projects: GA TA ČR(CZ) TA04010330 Institutional support: RVO:67985891 Keywords : anti-infectives * HPLC * coating * controlled release * degradation products * drug delivery systems * nanoparticles * pharmacokinetics * polymeric drug delivery systems Subject RIV: JI - Composite Materials Impact factor: 2.713, year: 2016

  18. Monochromatic light-emitting diode (LED source in layers hens during the second production cycle

    Directory of Open Access Journals (Sweden)

    Rodrigo Borille

    2015-09-01

    Full Text Available ABSTRACTLight is an important environmental factor for birds, allowing not only their vision, but also influencing their physiological responses, such as behavioral and reproductive activity. The objective of this experiment was to evaluate the impact of different colors of monochromatic light (LED sources in laying hens production during the second laying cycle. The study was conducted in an experimental laying house during 70 days. A total of 300 laying hens Isa Brown® genetic strain, aged 95 weeks, in the second laying cycle were used in the study. The artificial light sources used were blue, yellow, green, red and white. The light regimen was continuous illumination of 17 h per day (12 h natural and 5 h artificial in a daily light regimen of 17L:5D (light: dark. The Latin Square design was adopted with five treatments (five colors divided into five periods, and five boxes, with six replicates of ten birds in each box. The production and egg quality were evaluated. The different colors of light source did not affect production parameters or egg quality (p > 0.05. The monochromatic light source may be considered as an alternative to artificial lighting in laying hens during the second production cycle.

  19. Increasing pressure on freshwater resources due to terrestrial feed ingredients for aquaculture production.

    Science.gov (United States)

    Pahlow, M; van Oel, P R; Mekonnen, M M; Hoekstra, A Y

    2015-12-01

    As aquaculture becomes more important for feeding the growing world population, so too do the required natural resources needed to produce aquaculture feed. While there is potential to replace fish meal and fish oil with terrestrial feed ingredients, it is important to understand both the positive and negative implications of such a development. The use of feed with a large proportion of terrestrial feed may reduce the pressure on fisheries to provide feed for fish, but at the same time it may significantly increase the pressure on freshwater resources, due to water consumption and pollution in crop production for aquafeed. Here the green, blue and gray water footprint of cultured fish and crustaceans related to the production of commercial feed for the year 2008 has been determined for the major farmed species, representing 88% of total fed production. The green, blue and gray production-weighted average feed water footprints of fish and crustaceans fed commercial aquafeed are estimated at 1629 m3/t, 179 m3/t and 166 m3/t, respectively. The estimated global total water footprint of commercial aquafeed was 31-35 km3 in 2008. The top five contributors to the total water footprint of commercial feed are Nile tilapia, Grass carp, Whiteleg shrimp, Common carp and Atlantic salmon, which together have a water footprint of 18.2 km3. An analysis of alternative diets revealed that the replacement of fish meal and fish oil with terrestrial feed ingredients may further increase pressure on freshwater resources. At the same time economic consumptive water productivity may be reduced, especially for carnivorous species. The results of the present study show that, for the aquaculture sector to grow sustainably, freshwater consumption and pollution due to aquafeed need to be taken into account. Copyright © 2015. Published by Elsevier B.V.

  20. A highly concentrated diet increases biogas production and the agronomic value of young bull's manure.

    Science.gov (United States)

    Mendonça Costa, Mônica Sarolli Silva de; Lucas, Jorge de; Mendonça Costa, Luiz Antonio de; Orrico, Ana Carolina Amorim

    2016-02-01

    The increasing demand for animal protein has driven significant changes in cattle breeding systems, mainly in feedlots, with the use of young bulls fed on diets richer in concentrate (C) than in forage (F). These changes are likely to affect animal manure, demanding re-evaluation of the biogas production per kg of TS and VS added, as well as of its agronomic value as a biofertilizer, after anaerobic digestion. Here, we determined the biogas production and agronomic value (i.e., the macronutrient concentration in the final biofertilizer) of the manure of young bulls fed on diets with more (80% C+20% F; 'HighC' diet) or less (65% C+35% F; 'LowC' diet) concentrate, evaluating the effects of temperature (25, 35, and 40°C) and the use of an inoculum, during anaerobic digestion. A total of 24 benchtop reactors were used, operating in a semi-continuous system, with a 40-day hydraulic retention time (HRT). The manure from animals given the HighC diet had the greatest potential for biogas production, when digested with the use of an inoculum and at 35 or 40°C (0.6326 and 0.6207m(3)biogas/kg volatile solids, or VS, respectively). We observed the highest levels of the macronutrients N, P, and K in the biofertilizer from the manure of animals given HighC. Our results show that the manure of young bulls achieves its highest potential for biogas production and agronomic value when animals are fed diets richer in concentrate, and that biogas production increases if digestion is performed at higher temperatures, and with the use of an inoculum. Copyright © 2015 Elsevier Ltd. All rights reserved.

  1. Increasing milk solids production across lactation through genetic selection and intensive pasture-based feed system.

    Science.gov (United States)

    Coleman, J; Pierce, K M; Berry, D P; Brennan, A; Horan, B

    2010-09-01

    The objective of the study was to quantify the effect of genetic improvement using the Irish total merit index, the Economic Breeding Index (EBI), on overall performance and lactation profiles for milk, milk solids, body weight (BW), and body condition score (BCS) within 2 pasture-based systems of milk production likely to be used in the future, following abolition of the European Union's milk quota system. Three genotypes of Holstein-Friesian dairy cattle were established from within the Moorepark dairy research herd: LowNA, indicative of animals with North American origin and average or lower genetic merit at the time of the study; HighNA, North American Holstein-Friesians of high genetic merit; and HighNZ, New Zealand Holstein-Friesians of high genetic merit. Animals from within each genotype were randomly allocated to 1 of 2 possible pasture-based feeding systems (FS): 1) The Moorepark pasture (MP) system (2.64 cows/ha and 344 kg of concentrate supplement per cow per lactation) and 2) a high output per hectare (HC) system (2.85 cows/ha and 1,056 kg of concentrate supplement per cow per lactation). Pasture was allocated to achieve similar postgrazing residual sward heights for both treatments. A total of 126, 128, and 140 spring-calving dairy cows were used during the years 2006, 2007, and 2008, respectively. Each group had an individual farmlet of 17 paddocks and all groups were managed similarly throughout the study. The effects of genotype, FS, and the interaction between genotype and FS on milk production, BW, and BCS across lactation were studied using mixed models with factorial arrangements of genotype and FS accounting for the repeated cow records across years. No significant genotype by FS interaction was observed for any of the variables measured. Results show that milk solids production of the national average dairy cow can be increased across lactation through increased EBI. High EBI genotypes (HighNA and HighNZ) produced more milk solids per cow and

  2. Milk production and nutrient digestibility responses to increasing levels of stearic acid supplementation of dairy cows.

    Science.gov (United States)

    Boerman, J P; de Souza, J; Lock, A L

    2017-04-01

    The objective of our study was to evaluate the dose-response effects of a stearic acid (C18:0)-enriched supplement on nutrient digestibility, production responses, and the maximum amount of C18:0 that can be incorporated into the milk fat of dairy cows. Multiparous Holstein cows (n = 32; 145 ± 66 d in milk) with a wide range in milk yield (30 to 70 kg/d) were blocked by milk yield and assigned to replicated 4 × 4 Latin squares. Treatments were diets supplemented with a C18:0-enriched supplement (SA; 93% C18:0) at 0, 0.80, 1.50, or 2.30% of diet dry matter (DM). Periods were 21 d with the final 5 d used for data and sample collection. Dry matter intake increased linearly as SA supplementation increased. Supplementation of SA had no effect on the yield of milk or milk components. Due to the increase in DM intake, SA linearly reduced the ratio of energy-corrected milk to DM intake. Supplementation of SA did not affect body weight. Increasing SA reduced digestibility of 16-carbon, 18-carbon, and total fatty acids (FA), with the reduction in digestibility of 18-carbon FA being approximately 30 percentage units from the 0.0 to 2.30% SA supplemented diets. Supplementation of SA linearly increased concentrations of preformed milk fatty acids (FA) but did not affect the yield of preformed milk FA. Yields of C18:0 plus cis-9 C18:1 were increased by SA supplementation; however, the increase from 0 to 2.3% SA was only 16 g/d. The concentration and yield of de novo and 16-carbon milk FA were unaffected by SA supplementation. In conclusion, increasing doses of SA decreased FA digestibility and had little effect on production parameters. Although SA increased the yield of C18:0 and cis-9 C18:1 in milk fat, it had no overall effect on milk fat yield. The lack of production responses to a C18:0-enriched fat supplement was most likely associated with the marked decrease in FA digestibility. Copyright © 2017 American Dairy Science Association. Published by Elsevier Inc. All rights

  3. Lactulose mediates suppression of dextran sodium sulfate-induced colon inflammation by increasing hydrogen production.

    Science.gov (United States)

    Chen, Xiao; Zhai, Xiao; Shi, Jiazi; Liu, Wen Wu; Tao, Hengyi; Sun, Xuejun; Kang, Zhimin

    2013-06-01

    Molecular hydrogen (H2) is a potent antioxidant and able to protect organs from oxidative stress injuries. Orally administered lactulose, a potent H2 inducer, is digested by colon microflora and significantly increases H2 production, indicating its potential anti-inflammatory action. To evaluate the anti-inflammatory effects of lactulose on dextran sodium sulfate (DSS)-induced colitis in mice. Mice were randomly assigned into seven groups, receiving regular distilled water, H2-rich saline (peritoneal injection), DSS, oral lactulose (0.1, 0.15, 0.2 ml/10 g, respectively), and lactulose (0.2 ml/10 g) + oral antibiotics. The mouse model of human ulcerative colitis was established by supplying mice with water containing DSS. The H2 breath test was used to determine the exhaled H2 concentration. Body weight, colitis score, colon length, pathological features and tumor necrosis factor alpha (TNF-α), interleukin-1β (IL-1β), maleic dialdehyde (MDA) and marrow peroxidase (MPO) levels in colon lesions were evaluated. After 7 days, DSS-induced loss of body weight, increase of colitis score, shortening of colon length, pathological changes and elevated levels of TNF-α, IL-1β, MDA, and MPO in colon lesions, were significantly suppressed by oral lactulose administration and intraperitoneally injected H2-rich saline. Ingestion of antibiotics significantly compromised the anti-inflammatory effects of lactulose. The H2 breath test showed that lactulose administration significantly induced hydrogen production and that antibiotics administration could inhibit H2 production. Lactulose can prevent the development of DSS-induced colitis and alleviate oxidative stress in the colon, as measured by MDA and MPO, probably by increasing endogenous H2 production.

  4. Reconstitution of dewatered food processing residuals with manure to increase energy production from anaerobic digestion

    International Nuclear Information System (INIS)

    Wall, David M.; Wu-Haan, Wei; Safferman, Steven I.

    2012-01-01

    Solid residuals generated from dewatering food processing wastewater contain organic carbon that can potentially be reclaimed for energy through anaerobic digestion. This results in the diversion of waste from a landfill and uses it for a beneficial purpose. Dewatering the waste concentrates the carbon, reducing transportation costs to a farm digester where it can be blended with manure to increase biogas yield. Polymers are often used in the dewatering of the food waste but little is known regarding their impact on biogas production. Four 2 dm 3 working volume, semi-continuous reactors, were used at a mesophilic temperature and a solids retention time (SRT) of 15 days. Reactors were fed daily with a blended feedstock containing a food processing sludge waste (FPSW)/manure ratio of 2.2:1 (by weight) as this produced the optimized carbon to nitrogen ratio. Results demonstrated that reconstitution of dewatered FPSW with dairy manure produced approximately 2 times more methane than animal manure alone for the same volume. However, only approximately 30% of volatile solids (VS) were consumed indicating energy potential still remained. Further, the efficiency of the conversion of VS to methane for the blended FPSW/manure was substantially less than for manure only. However, the overall result is an increase in energy production for a given tank volume, which can decrease life cycle costs. Because all FPSW is unique and the determination of dewatering additives is customized based on laboratory testing and field adjustment, generalizations are difficult and specific testing is required. -- Highlights: ► Energy production in anaerobic digestion can increase by co-blending food waste. ► Energy for transporting food waste to blend with manure is less when dewatered. ► Dewatered food waste in manure produced twice as much methane than manure. ► Efficiency of carbon to methane was low because of ammonium bicarbonate production. ► Carbon destruction was 30%, more

  5. Hyperglycosylated human chorionic gonadotropin does not increase progesterone production by luteinized granulosa cells.

    Science.gov (United States)

    Crochet, John R; Shah, Anish A; Schomberg, David W; Price, Thomas M

    2012-09-01

    Trophoblast-derived human chorionic gonadotropin (hCG) promotes corpus luteum progesterone (P4) production, and wide ranges of serum P4 levels are noted in various pregnancy outcomes, despite similar hCG concentrations. There are five unique biologically active hCG variants in human pregnancy urine, and previous studies of P4 production in response to hCG have used only preparations containing all isoforms. Understanding exactly which hCG variant is primarily responsible for stimulating corpus luteum steroidogenesis may have great clinical and diagnostic implications, including in the setting of ectopic pregnancy. Our objective was to delineate the role of the standard and hyperglycosylated (H)-hCG isoforms in stimulating P4 production by luteinized granulosa cells. Cell culture, ELISA, and fluorometric-based protein assays were done at Duke University Medical Center. Patients were anonymous oocyte donors. Cultured luteinized granulosa cells were treated with 0.25, 0.5, and 1.0 ng/ml total hCG, which contains all isoforms, purified standard hCG (37.1 kDa), and purified H-hCG (42.8 kDa). P4 produced per total cellular protein (nanograms per microgram) was measured via ELISA and fluorometric protein determination kits. Both total hCG (P = 0.0003) and purified standard hCG (P production. Purified H-hCG did not change the P4 produced per total cellular protein response (P value not significant). Standard hCG stimulated P4 production by cultured granulosa cells and likely supports corpus luteum function via interactions with the LH/hCG receptor. In contrast, H-hCG did not increase P4 production, which indicates a nonsteroidogenic role for this protein during early gestation.

  6. Incremental benefits from the increasing in the production of koi fish Cyprinus carpio var. koi culture

    Directory of Open Access Journals (Sweden)

    Iis Diatin

    2017-07-01

    Full Text Available ABSTRACT  Koi fish is one of the species included in the intensification program of ornamental fish production. Production of koi has only reached 82.04% of total national production target thus making it potential for development. The objective of the study was to assess additional financial benefit of production increment through stocking pattern modification. Present research was performed using case study method on Pokdakan PBC Fish Farm (PPFF, koi fish farmers in Sukabumi. Financial analysis consisted of business analysis, investment criteria, and sensitivity. Stocking pattern management could increase ornamental fish production and its benefit margin up to 1.5 times higher. That investment criteria has shown NPV at value of IDR3,824 million, net BCR 4.96, IRR 86.0%, and PP 1.7 years. Koi fish farming was sensitive to a decline in survival rate and insensitive to the rise of formulated feed price. Keywords: business analysis, koi, investment criteria, production pattern, sensitivity  ABSTRAK  Ikan koi merupakan salah satu ikan yang termasuk dalam program penguatan produksi ikan hias Indonesia. Capaian dari target produksi ikan koi yang ditetapkan pemerintah hanya mencapai 82,04 %, sehingga budidaya ikan koi potensial untuk dikembangkan dan ditingkatkan produksinya. Metode yang digunakan adalah studi kasus pada kelompok pembudidaya ikan hias koi PPFF di Sukabumi. Analisis finansial yang digunakan meliputi analisis usaha, kriteria investasi dan sensitivitas. Pengaturan pola tebar dapat meningkatkan jumlah produksi ikan hias dan marjin keuntungan hingga 1,5 kali. Analisis kriteria investasi menghasilkan nilai NPV sebesar Rp3.824 juta, net B/C 4,94, IRR 86,0% dan PP 1,7 tahun. Budidaya ikan koi sensitif terhadap penurunan kelangsungan hidup dan tidak sensitif terhadap peningkatan harga pakan buatan. Kata kunci: analisis usaha, koi, kriteria investasi, pola tebar, produksi

  7. Application of Bioameliorant and Biofertilizers to Increase the Soil Health and Rice Productivity

    Directory of Open Access Journals (Sweden)

    Tualar Simarmata

    2016-10-01

    Full Text Available The major rice intensity of diseases in Indonesia was increased significantly and has caused a yield loss of up to 20–30%. The experiments had been conducted to investigate the effect of bioameliorant or composted straw (CS combined with consortia of biofertilizers (CB and biocontrol agent to restore the soil health and promote the induced systemic resistance (ISR for increasing the rice productivity. The experiment arranged as randomized block design consisted of 12 treatments (0, 2.5, 5.0 and 7.5 ton of CS per ha combined with 400 g of CB and 200 g inoculant of CB + 200 g inoculant of Trichoderma sp and was provided with three replications. The experimental results revealed that application of 2.5–7.5 ton per ha of bioameliorant combined with 400 g per ha of CB and 400 g Trichoderma sp has increased the ISR and enhanced the rice productivity significantly. The brown spot, sheath rice blight and bacterial leaf blight diseases were reduced from 16.7% to 3.3–8.0%, 20% to 4–10%, 24% to 2.7–4.7% and 20.7% to 8–14.0%, respectively at 7 weeks after transplanting. In addition, the rice grain yield was increased from about 7.1 ton ha−1 to 7.9–10.1 ton per ha.

  8. Phenotypic plasticity of fine root growth increases plant productivity in pine seedlings

    Directory of Open Access Journals (Sweden)

    Grissom James E

    2004-09-01

    Full Text Available Abstract Background The plastic response of fine roots to a changing environment is suggested to affect the growth and form of a plant. Here we show that the plasticity of fine root growth may increase plant productivity based on an experiment using young seedlings (14-week old of loblolly pine. We use two contrasting pine ecotypes, "mesic" and "xeric", to investigate the adaptive significance of such a plastic response. Results The partitioning of biomass to fine roots is observed to reduce with increased nutrient availability. For the "mesic" ecotype, increased stem biomass as a consequence of more nutrients may be primarily due to reduced fine-root biomass partitioning. For the "xeric" ecotype, the favorable influence of the plasticity of fine root growth on stem growth results from increased allocation of biomass to foliage and decreased allocation to fine roots. An evolutionary genetic analysis indicates that the plasticity of fine root growth is inducible, whereas the plasticity of foliage is constitutive. Conclusions Results promise to enhance a fundamental understanding of evolutionary changes of tree architecture under domestication and to design sound silvicultural and breeding measures for improving plant productivity.

  9. Pistil Smut Infection Increases Ovary Production, Seed Yield Components, and Pseudosexual Reproductive Allocation in Buffalograss

    Directory of Open Access Journals (Sweden)

    Ambika Chandra

    2014-12-01

    Full Text Available Sex expression of dioecious buffalograss [Bouteloua dactyloides Columbus (syn. Buchloë dactyloides (Nutt. Engelm.] is known to be environmentally stable with approximate 1:1, male to female, sex ratios. Here we show that infection by the pistil smut fungus [Salmacisia buchloëana Huff & Chandra (syn. Tilletia buchloëana Kellerman and Swingle] shifts sex ratios of buffalograss to be nearly 100% phenotypically hermaphroditic. In addition, pistil smut infection decreased vegetative reproductive allocation, increased most seed yield components, and increased pseudosexual reproductive allocation in both sex forms compared to uninfected clones. In female sex forms, pistil smut infection resulted in a 26 fold increase in ovary production and a 35 fold increase in potential harvest index. In male sex forms, pistil smut infection resulted in 2.37 fold increase in floret number and over 95% of these florets contained a well-developed pistil. Although all ovaries of infected plants are filled with fungal teliospores and hence reproductively sterile, an average male-female pair of infected plants exhibited an 87 fold increase in potential harvest index compared to their uninfected clones. Acquiring an ability to mimic the effects of pistil smut infection would enhance our understanding of the flowering process in grasses and our efforts to increase seed yield of buffalograss and perhaps other grasses.

  10. Marine isoprene production and consumption in the mixed layer of the surface ocean - a field study over two oceanic regions

    Science.gov (United States)

    Booge, Dennis; Schlundt, Cathleen; Bracher, Astrid; Endres, Sonja; Zäncker, Birthe; Marandino, Christa A.

    2018-02-01

    Parameterizations of surface ocean isoprene concentrations are numerous, despite the lack of source/sink process understanding. Here we present isoprene and related field measurements in the mixed layer from the Indian Ocean and the eastern Pacific Ocean to investigate the production and consumption rates in two contrasting regions, namely oligotrophic open ocean and the coastal upwelling region. Our data show that the ability of different phytoplankton functional types (PFTs) to produce isoprene seems to be mainly influenced by light, ocean temperature, and salinity. Our field measurements also demonstrate that nutrient availability seems to have a direct influence on the isoprene production. With the help of pigment data, we calculate in-field isoprene production rates for different PFTs under varying biogeochemical and physical conditions. Using these new calculated production rates, we demonstrate that an additional significant and variable loss, besides a known chemical loss and a loss due to air-sea gas exchange, is needed to explain the measured isoprene concentration. We hypothesize that this loss, with a lifetime for isoprene between 10 and 100 days depending on the ocean region, is potentially due to degradation or consumption by bacteria.

  11. Rain increases methane production and methane oxidation in a boreal thermokarst bog

    Science.gov (United States)

    Neumann, R. B.; Moorberg, C.; Turner, J.; Wong, A.; Waldrop, M. P.; Euskirchen, E. S.; Edgar, C.; Turetsky, M. R.

    2017-12-01

    Bottom-up biogeochemical models of wetland methane emissions simulate the response of methane production, oxidation and transport to wetland conditions and environmental forcings. One reason for mismatches between bottom-up and top-down estimates of emissions is incomplete knowledge of factors and processes that control microbial rates and methane transport. To advance mechanistic understanding of wetland methane emissions, we conducted a multi-year field investigation and plant manipulation experiment in a thermokarst bog located near Fairbanks, Alaska. The edge of the bog is experiencing active permafrost thaw, while the center of the bog thawed 50 to 100 years ago. Our study, which captured both an average year and two of the wettest years on record, revealed how rain interacts with vascular vegetation and recently thawed permafrost to affect methane emissions. In the floating bog, rain water warmed and oxygenated the subsurface, but did not alter soil saturation. The warmer peat temperatures increased both microbial methane production and plant productivity at the edge of the bog near the actively thawing margin, but minimally altered microbial and plant activity in the center of the bog. These responses indicate processes at the edge of the bog were temperature limited while those in the center were not. The compounding effect of increased microbial activity and plant productivity at the edge of the bog doubled methane emissions from treatments with vascular vegetation during rainy years. In contrast, methane emissions from vegetated treatments in the center of the bog did not change with rain. The oxygenating influence of rain facilitated greater methane oxidation in treatments without vascular vegetation, which offset warming-induced increases in methane production at the edge of the bog and decreased methane emissions in the center of the bog. These results elucidate the complex and spatially variable response of methane production and oxidation in

  12. Increasing Therapist Productivity: Using Lean Principles in the Rehabilitation Department of an Academic Medical Center.

    Science.gov (United States)

    Johnson, Diana; Snedeker, Kristie; Swoboda, Michael; Zalieckas, Cheryl; Dorsey, Rachel; Nohe, Cassandra; Smith, Paige; Roche, Renuka

    The Department of Rehabilitation Services, within the University of Maryland Medical Center's 650-bed academic medical center, was experiencing difficulty in meeting productivity standards. Therapists in the outpatient division believed they were not spending enough time performing billable patient care activities. Therapists in the inpatient division had difficulty keeping pace with the volume of incoming referrals. Collectively, these issues caused dissatisfaction among referral sources and frustration among the staff within the rehabilitation department. The department undertook a phased approach to address these issues that included examining the evidence, using Lean process improvement principles, and employing transformational leadership strategies to drive improvements in productivity and efficiency. The lessons learned support the importance of having meaningful metrics appropriate for the patient population served, the use of Lean as an effective tool for improving productivity in rehabilitation departments, the impact of engaging staff at the grassroots level, and the importance of having commitment from leaders. The study findings have implications for not only rehabilitation and hospital leadership, but CEOs and managers of any business who need to eliminate waste or increase staff productivity.

  13. Increasing the production of desulfurizing biocatalysts by means of fed - batch culture

    International Nuclear Information System (INIS)

    Berdugo, C I; Mena, J A; Acero, J R; Mogollon, L

    2001-01-01

    Over the past years, environmental regulations have driven a lot of effort for the development of new technologies for the upgrading of fossil fuels. Biotechnology offers an alternative way to process fossil fuels by means of a biodesulfurization technology where the production of the biocatalyst is one of the key topics. Traditionally, the production is carried out in batch culture where the maximum cellular concentration is restricted by inherent limitations of the culture type and the microorganism growth rate. This work addresses the production of two desulfurizing microorganisms: Rhodococcus erythropolis IGTS8 and gordona rubropertinctus ICP172 using fed-batch culture. Fed-batch cultures were conducted in a 12 L fermentor using ICP 4 medium containing glucose and DMSO as carbon and sulfur sources. As a result, cell concentration was increased 1.5 and 3 times with fed-batch cultures using constant and exponential flow respectively, achieving a maximum cell concentration of 7.3 g DCW/L of biocatalyst igts8 and 12.85 gGDCW/L of the new biocatalyst ICP172. Both biocatalysts presented biodesulfurization activity in a spiked matrix DBT/HXD and in diesel matrix with the detection of 2-HBP which is the end-product of DBT degradation pathway

  14. Effort to Increase Oil Palm Production through Application Technique of Soil and Water Conservation

    Directory of Open Access Journals (Sweden)

    Kukuh Murtilaksono

    2009-05-01

    Full Text Available The study was carried out at block 375, 415, and 414 (block 1, 2, and 3 Afdeling III, Mangement Unit of Rejosari, PT Perkebunan Nusantara VII, Lampung from June 2005 until December 2007. Objective of the study is to examine the effect of soil and water conservation measurement, namely bund terrace and silt pit that are combined with retarded-water hole on production of oil palm. Sampled trees of each block were randomly selected as much as 36 trees. Parameters of vegetative growth (additional new frond, total of frond, number of new bunch, production (number of bunch, fresh fruit bunch (TBS, and average of bunch weigh (RBT were observed and recorded every two weeks. Production of palm oil of each block was also recorded every harvesting schedule of Afdeling. Tabular data were analyzed descriptively by logical comparison among the blocks as result of application of bund terrace and silt pit. Although the data of sampled trees were erratic, bund terrace and silt pit generally increasing number of frond, number of bunch, average of bunch weight, and fresh fruit bunch. Bund terrace gived the highest production of TBS (25.2 t ha-1 compared to silt pit application (23.6 t ha-1, and it has better effect on TBS than block control (20.8 t ha-1. Aside from that, RBT is the highest (21 kg at bund terrace block compared to silt pit block (20 kg and control block (19 kg.

  15. Increasing the reliability of production schedules in a pharmaceutical packaging department.

    Science.gov (United States)

    Pacciarelli, Dario; D'Ariano, Andrea

    2012-12-01

    This paper studies quantitative methods for evaluating the potential benefits of introducing new advanced tracking technologies in the pharmaceutical industry with special reference to radio frequency identification (RFID). RFID technology is an effective way for increasing the quality of the data that are used to generate production schedules, but there is a lack of scientific research to quantify the return on investment that can be achieved in practice. In this work, we distinguish two major sources of data unreliability: one is the inherent stochasticity of operations, which cannot be reduced by RFID, and the other one is the data estimation error, which can be significantly reduced by RFID. We focus on the marginal contribution of the latter quantity to the productivity of the packaging department of a pharmaceutical plant, propose a systematic method for assessing this impact and discuss its implementation in a practical test case. Our results confirm that advanced tracking technologies in combination with effective scheduling procedures show a significant potential for improving productivity. Extensions to other production environments and their issues associated with scheduling problems are also discussed.

  16. Increasing antibiotic resistance in preservative-tolerant bacterial strains isolated from cosmetic products.

    Science.gov (United States)

    Orús, Pilar; Gomez-Perez, Laura; Leranoz, Sonia; Berlanga, Mercedes

    2015-03-01

    To ensure the microbiological quality, consumer safety and organoleptic properties of cosmetic products, manufacturers need to comply with defined standards using several preservatives and disinfectants. A drawback regarding the use of these preservatives is the possibility of generating cross-insusceptibility to other disinfectants or preservatives, as well as cross resistance to antibiotics. Therefore, the objective of this study was to understand the adaptive mechanisms of Enterobacter gergoviae, Pseudomonas putida and Burkholderia cepacia that are involved in recurrent contamination in cosmetic products containing preservatives. Diminished susceptibility to formaldehyde-donors was detected in isolates but not to other preservatives commonly used in the cosmetics industry, although increasing resistance to different antibiotics (β-lactams, quinolones, rifampicin, and tetracycline) was demonstrated in these strains when compared with the wild-type strain. The outer membrane protein modifications and efflux mechanism activities responsible for the resistance trait were evaluated. The development of antibiotic-resistant microorganisms due to the selective pressure from preservatives included in cosmetic products could be a risk for the emergence and spread of bacterial resistance in the environment. Nevertheless, the large contribution of disinfection and preservation cannot be denied in cosmetic products. Copyright© by the Spanish Society for Microbiology and Institute for Catalan Studies.

  17. Increased ethanol production by deletion of HAP4 in recombinant xylose-assimilating Saccharomyces cerevisiae.

    Science.gov (United States)

    Matsushika, Akinori; Hoshino, Tamotsu

    2015-12-01

    The Saccharomyces cerevisiae HAP4 gene encodes a transcription activator that plays a key role in controlling the expression of genes involved in mitochondrial respiration and reductive pathways. This work examines the effect of knockout of the HAP4 gene on aerobic ethanol production in a xylose-utilizing S. cerevisiae strain. A hap4-deleted recombinant yeast strain (B42-DHAP4) showed increased maximum concentration, production rate, and yield of ethanol compared with the reference strain MA-B42, irrespective of cultivation medium (glucose, xylose, or glucose/xylose mixtures). Notably, B42-DHAP4 was capable of producing ethanol from xylose as the sole carbon source under aerobic conditions, whereas no ethanol was produced by MA-B42. Moreover, the rate of ethanol production and ethanol yield (0.44 g/g) from the detoxified hydrolysate of wood chips was markedly improved in B42-DHAP4 compared to MA-B42. Thus, the results of this study support the view that deleting HAP4 in xylose-utilizing S. cerevisiae strains represents a useful strategy in ethanol production processes.

  18. Increasing community health worker productivity and effectiveness: a review of the influence of the work environment

    Directory of Open Access Journals (Sweden)

    Jaskiewicz Wanda

    2012-09-01

    Full Text Available Abstract Background Community health workers (CHWs are increasingly recognized as a critical link in improving access to services and achieving the health-related Millennium Development Goals. Given the financial and human resources constraints in developing countries, CHWs are expected to do more without necessarily receiving the needed support to do their jobs well. How much can be expected of CHWs before work overload and reduced organizational support negatively affect their productivity, the quality of services, and in turn the effectiveness of the community-based programmes that rely on them? This article presents policy-makers and programme managers with key considerations for a model to improve the work environment as an important approach to increase CHW productivity and, ultimately, the effectiveness of community-based strategies. Methods A desk review of selective published and unpublished articles and reports on CHW programs in developing countries was conducted to analyse and organize findings on the elements that influence CHW productivity. The search was not exhaustive but rather was meant to gather information on general themes that run through the various documents to generate perspectives on the issue and provide evidence on which to formulate ideas. After an initial search for key terminology related to CHW productivity, a snowball technique was used where a reference in one article led to the discovery of additional documents and reports. Results CHW productivity is determined in large part by the conditions under which they work. Attention to the provision of an enabling work environment for CHWs is essential for achieving high levels of productivity. We present a model in which the work environment encompasses four essential elements—workload, supportive supervision, supplies and equipment, and respect from the community and the health system—that affect the productivity of CHWs. We propose that when CHWs have a

  19. Effect of corrosion product layer on SCC susceptibility of copper containing type 304 stainless steel in 1 M H2SO4

    International Nuclear Information System (INIS)

    Asawa, M.; Devasenapathi, A.; Fujisawa, M.

    2004-01-01

    The effect of surface corrosion product layer on the stress corrosion cracking (SCC) susceptibility of type 304 stainless steel with Cu was studied in 1 kmol/m 3 (1 M) sulfuric acid at 353 K temperature. Studies based on the intermittent removal of surface corrosion product layer indicated that the surface film governs the SCC behavior of the alloy by accelerating both the crack initiation and propagation stages. The electrochemical impedance and polarization studies showed the surface layer to be promoting SCC initiation by lowering the uniform corrosion rate and the propagation by shifting the surface corrosion potential to a more noble direction. The elemental analysis of the corrosion product both by the energy dispersive X-ray (EDX) spectroscopy and by X-ray diffraction (XRD) analysis along with the thermodynamic calculations showed the layer to be constituted mainly of metallic copper (Cu) and the mono-hydrated iron sulfate which acts as cathode promoting SCC

  20. Replacement of raw soybean with roasted soybean increased milk production in Holstein cows

    Directory of Open Access Journals (Sweden)

    Gilson Sebastião Dias Júnior

    Full Text Available ABSTRACT: The aim of this study was to evaluate the effect of total replacement of raw whole soybean (RAW for roastedwhole soybean (ROS on the production performance of Holstein cows. Two experiments were carried out usinga simple reversal design where RAW has been completely replaced by ROS. In experiment 1, 22 cows (175±60 days in milkwere used, and the dietary inclusion level of RAW or ROS was 3.7% of dry matter (DM. In experiment 2, 16 cows (130±50 days in milkwere used, and thedietary inclusion level of RAW or ROS was 11% of DM. In both experiments, ROS increased milk production by 1.1kgday-1 without changing fat and protein production. Dry matter intake or milk urea nitrogenwere not affected by dietary soy source. In experiment 2, plasma glucose concentration was decreased, and allantoin/creatinine ratio in urine tended to decreasein ROS. Experiment 2 also evaluated the nutrient digestibility and ruminal degradation kinetics of crude protein in two soybean sources. Roasting had no effect on the digestibility of DM, organic matter, and neutral detergent fiber. Roasted whole soybean hadgreater fraction B and lower protein degradation rate than did RAW; this showed that heat treatment was effective in increasing therumen undegradable amino acid flowto the animal, which suggesteda potential mechanism of action for improved performance observed in ROS.

  1. Increasing operating room productivity by duration categories and a newsvendor model.

    Science.gov (United States)

    Lehtonen, Juha-Matti; Torkki, Paulus; Peltokorpi, Antti; Moilanen, Teemu

    2013-01-01

    Previous studies approach surgery scheduling mainly from the mathematical modeling perspective which is often hard to apply in a practical environment. The aim of this study is to develop a practical scheduling system that considers the advantages of both surgery categorization and newsvendor model to surgery scheduling. The research was carried out in a Finnish orthopaedic specialist centre that performs only joint replacement surgery. Four surgery categorization scenarios were defined and their productivity analyzed by simulation and newsvendor model. Detailed analyses of surgery durations and the use of more accurate case categories and their combinations in scheduling improved OR productivity 11.3 percent when compared to the base case. Planning to have one OR team to work longer led to remarkable decrease in scheduling inefficiency. In surgical services, productivity and cost-efficiency can be improved by utilizing historical data in case scheduling and by increasing flexibility in personnel management. The study increases the understanding of practical scheduling methods used to improve efficiency in surgical services.

  2. Closing the gap: global potential for increasing biofuel production through agricultural intensification

    International Nuclear Information System (INIS)

    Johnston, Matt; Foley, J; Mueller, N D; Licker, R; Holloway, T; Barford, C; Kucharik, C

    2011-01-01

    Since the end of World War II, global agriculture has undergone a period of rapid intensification achieved through a combination of increased applications of chemical fertilizers, pesticides, and herbicides, the implementation of best management practice techniques, mechanization, irrigation, and more recently, through the use of optimized seed varieties and genetic engineering. However, not all crops and not all regions of the world have realized the same improvements in agricultural intensity. In this study we examine both the magnitude and spatial variation of new agricultural production potential from closing of 'yield gaps' for 20 ethanol and biodiesel feedstock crops. With biofuels coming under increasing pressure to slow or eliminate indirect land-use conversion, the use of targeted intensification via established agricultural practices might offer an alternative for continued growth. We find that by closing the 50th percentile production gap-essentially improving global yields to median levels-the 20 crops in this study could provide approximately 112.5 billion liters of new ethanol and 8.5 billion liters of new biodiesel production. This study is intended to be an important new resource for scientists and policymakers alike-helping to more accurately understand spatial variation of yield and agricultural intensification potential, as well as employing these data to better utilize existing infrastructure and optimize the distribution of development and aid capital.

  3. Nuclear techniques to study the role of mycorrhiza in increasing food crop production

    International Nuclear Information System (INIS)

    1985-07-01

    A group of consultants, whose names are listed at the end of this publication were invited by the FAO/IAEA Division to Vienna from 16-20 November 1981 to review, together with the Division's staff, the state-of-the-art regarding Vascular-arbuscular-mycorrhizal symbiosis with various food crops, to assess the useful role of the association in food crop production, and to recommend inputs that the Joint FAO/IAEA Division could make to promote research which might lead to the exploitation of VAM for increased crop production. The reports presented at the meeting covered several topics, including the ecology of the VAM fungus, mechanism of VAM infection, factors affecting the establishment of an effective symbiosis with food crops, mechanisms for enhanced nutrient availability to mycorrhizal plants, increased tolerance of mycorrhizal plants to adverse environmental conditions, inoculum production and field inoculation procedures. These reports, together with the experimental plans and recommendations made at the meeting, are embodied in this unpriced Technical Document. Separate abstracts were prepared for the various presentations at this meeting

  4. Increasing flux rate to shorten leaching period and ramp-up production

    Science.gov (United States)

    Ngantung, Billy; Agustin, Riska; Ravi'i

    2017-01-01

    J Resources Bolaang Mongondow (JBRM) has operated a dynamic heap leach in its Bakan Gold Mine since late 2013. After successfully surpassing its name plate capacity of 2.6 MT/annum in 2014, the clayey and transition ore become the next operational challenge. The presence of transition and clayey ore requires longer leaching period, hence reducing the leach pad capacity which then caused reduced production. Maintaining or even increasing production with such longer leaching ore types can be done by expanding the leach pad area which means an additional capital investment, and/or shortening the leaching cycle which compromise a portion of gold extraction. JBRM has been successfully increasing the leach pad production from 2.6 MT/annum to 3.8 MT/annum, whilst improving the gold extraction from around 70% to around 80%. This was achieved by managing the operation of the leach pad which is shortening the leach cycle by identifying and combining the optimal flux rate application versus the tonne processed in each cell, at no capital investment for expanding the cell capacity.

  5. Resveratrol increases nitric oxide production in the rat thick ascending limb via Ca2+/calmodulin.

    Science.gov (United States)

    Gonzalez-Vicente, Agustin; Cabral, Pablo D; Garvin, Jeffrey L

    2014-01-01

    The thick ascending limb of the loop of Henle reabsorbs 30% of the NaCl filtered through the glomerulus. Nitric oxide (NO) produced by NO synthase 3 (NOS3) inhibits NaCl absorption by this segment. Resveratrol, a polyphenol, has beneficial cardiovascular and renal effects, many of which are mediated by NO. Resveratrol increases intracellular Ca2+ (Cai) and AMP kinase (AMPK) and NAD-dependent deacetylase sirtuin1 (SIRT1) activities, all of which could activate NO production. We hypothesized that resveratrol stimulates NO production by thick ascending limbs via a Ca2+/calmodulin-dependent mechanism. To test this, the effect of resveratrol on NO bioavailability was measured in thick ascending limb suspensions. Cai was measured in single perfused thick ascending limbs. SIRT1 activity and expression were measured in thick ascending limb lysates. Resveratrol (100 µM) increased NO bioavailability in thick ascending limb suspensions by 1.3±0.2 AFU/mg/min (pthick ascending limbs via a Ca2+/calmodulin dependent mechanism, and SIRT1 and AMPK do not participate. Resveratrol-stimulated NO production in thick ascending limbs may account for part of its beneficial effects.

  6. An EPQ Model with Increasing Demand and Demand Dependent Production Rate under Trade Credit Financing

    Directory of Open Access Journals (Sweden)

    Juanjuan QIN

    2015-05-01

    Full Text Available This paper investigates an EPQ model with the increasing demand and demand dependent production rate involving the trade credit financing policy, which is seldom reported in the literatures. The model considers the manufacturer was offered by the supplier a delayed payment time. It is assumed that the demand is a linear increasing function of the time and the production rate is proportional to the demand. That is, the production rate is also a linear function of time. This study attempts to offer a best policy for the replenishment cycle and the order quantity for the manufacturer to maximum its profit per cycle. First, the inventory model is developed under the above situation. Second, some useful theoretical results have been derived to characterize the optimal solutions for the inventory system. The Algorithm is proposed to obtain the optimal solutions of the manufacturer. Finally, the numerical examples are carried out to illustrate the theorems, and the sensitivity analysis of the optimal solutions with respect to the parameters of the inventory system is performed. Some important management insights are obtained based on the analysis.

  7. Peer support of a faculty "writers' circle" increases confidence and productivity in generating scholarship.

    Science.gov (United States)

    Brandon, Catherine; Jamadar, David; Girish, Gandikota; Dong, Qian; Morag, Yoav; Mullan, Patricia

    2015-04-01

    Publishing is critical for academic medicine career advancement. Rejection of manuscripts can be demoralizing. Obstacles faced by clinical faculty may include lack of time, confidence, and optimal writing practices. This study describes the development and evaluation of a peer-writing group, informed by theory and research on faculty development and writing. Five clinical-track radiology faculty members formed a "Writers' Circle" to promote scholarly productivity and reflection on writing practices. Members decided to work with previously rejected manuscripts. After members' initial meeting, interactions were informal, face to face during clinical work, and online. After the first 6 months, an anonymous survey asked members about the status of articles and evaluations of the writing group. Ten previously rejected articles, at least one from each member, were submitted to the Circle. In 6 months, four manuscripts were accepted for publication, five were in active revision, and one was withdrawn. All participants (100%) characterized the program as worth their time, increasing their motivation to write, their opportunities to support scholarly productivity of colleagues, and their confidence in generating scholarship. Peer-support writing groups can facilitate the pooling of expertise and the exchange of recommended writing practices. Our peer-support group increased scholarly productivity and provided a collegial approach to academic writing. Copyright © 2015 AUR. Published by Elsevier Inc. All rights reserved.

  8. Closing the gap: global potential for increasing biofuel production through agricultural intensification

    Energy Technology Data Exchange (ETDEWEB)

    Johnston, Matt; Foley, J; Mueller, N D [Institute on the Environment (IonE), University of Minnesota, Saint Paul, MN 55108 (United States); Licker, R; Holloway, T; Barford, C; Kucharik, C [Center for Sustainability and the Global Environment, University of Wisconsin, Madison, WI 53726 (United States)

    2011-07-15

    Since the end of World War II, global agriculture has undergone a period of rapid intensification achieved through a combination of increased applications of chemical fertilizers, pesticides, and herbicides, the implementation of best management practice techniques, mechanization, irrigation, and more recently, through the use of optimized seed varieties and genetic engineering. However, not all crops and not all regions of the world have realized the same improvements in agricultural intensity. In this study we examine both the magnitude and spatial variation of new agricultural production potential from closing of 'yield gaps' for 20 ethanol and biodiesel feedstock crops. With biofuels coming under increasing pressure to slow or eliminate indirect land-use conversion, the use of targeted intensification via established agricultural practices might offer an alternative for continued growth. We find that by closing the 50th percentile production gap-essentially improving global yields to median levels-the 20 crops in this study could provide approximately 112.5 billion liters of new ethanol and 8.5 billion liters of new biodiesel production. This study is intended to be an important new resource for scientists and policymakers alike-helping to more accurately understand spatial variation of yield and agricultural intensification potential, as well as employing these data to better utilize existing infrastructure and optimize the distribution of development and aid capital.

  9. Closing the gap: global potential for increasing biofuel production through agricultural intensification

    Science.gov (United States)

    Johnston, Matt; Licker, R.; Foley, J.; Holloway, T.; Mueller, N. D.; Barford, C.; Kucharik, C.

    2011-07-01

    Since the end of World War II, global agriculture has undergone a period of rapid intensification achieved through a combination of increased applications of chemical fertilizers, pesticides, and herbicides, the implementation of best management practice techniques, mechanization, irrigation, and more recently, through the use of optimized seed varieties and genetic engineering. However, not all crops and not all regions of the world have realized the same improvements in agricultural intensity. In this study we examine both the magnitude and spatial variation of new agricultural production potential from closing of 'yield gaps' for 20 ethanol and biodiesel feedstock crops. With biofuels coming under increasing pressure to slow or eliminate indirect land-use conversion, the use of targeted intensification via established agricultural practices might offer an alternative for continued growth. We find that by closing the 50th percentile production gap—essentially improving global yields to median levels—the 20 crops in this study could provide approximately 112.5 billion liters of new ethanol and 8.5 billion liters of new biodiesel production. This study is intended to be an important new resource for scientists and policymakers alike—helping to more accurately understand spatial variation of yield and agricultural intensification potential, as well as employing these data to better utilize existing infrastructure and optimize the distribution of development and aid capital.

  10. Increased immunoglobulin production in silver catfish (Rhamdia quelen exposed to agrichemicals

    Directory of Open Access Journals (Sweden)

    L.C. Kreutz

    2014-06-01

    Full Text Available Fish vaccination has been increasingly exploited as a tool to control pathogen infection. The production of immunoglobulin following vaccination might be affected by several factors such as management procedures, water temperature, and the presence of xenobiotics. In the present study, we aimed to investigate the kinetics of immunoglobulin production in silver catfish (Rhamdia quelen inoculated with inactivated Aeromonas hydrophila and kept at two different water temperatures (17.4±0.4° or 21.3±0.3°C. The effect of a second antigen inoculation and exposure of fish to sublethal concentrations of the herbicides atrazine and glyphosate at 10% of the lethal concentration (LC50-96h on specific serum antibodies were also investigated. Antibodies to A. hydrophila were detected as early as 7 days post-inoculation and increased steadily up to 35 days. The kinetics of antibody production were similar in fish kept at 17.4±0.4° and 21.3±0.3°C, and reinoculation of antigen at 21 days after priming failed to increase specific antibody levels. Intriguingly, we found that, in fish exposed to atrazine and glyphosate, the secretion of specific antibodies was higher than in non-exposed inoculated fish. These findings are important for the design of vaccines and vaccination strategies in Neotropical fish species. However, because atrazine and glyphosate are widespread contaminants of soil and water, their immune-stimulating effect could be harmful, in that fish living in herbicide-contaminated water might have increased concentrations of nonspecific antibodies that could mediate tissue injury.

  11. Increased sugarcane water productivity in Brazil avoids land use change and related environmental impacts

    Science.gov (United States)

    Scarpare, F. V.; Galdos, M. V.; Kolln, O.; Gava, G.; Franco, H.; Trivelin, P.

    2012-12-01

    Fábio V. Scarparea, Marcelo V. Galdosa, Oriel T. Kollna, Glauber J.C. Gavab, Henrique J. Francoa, Paulo C.O. Trivelinc a Laboratório Nacional de Ciência e Tecnologia do Bioetanol - CTBE/CNPEM, C.P. 6170, Campinas, SP, 13083-970, Brazil. E-mail: fabio.scarpare@bioetanol.org.br b APTA - Polo Centro Oeste. Rod. SP 304, km 304, CP 66, Jaú, SP, 17201-970, Brazil. c Laboratório de Isótopos Estáveis, Centro de Energia Nuclear na Agricultura, CENA/USP, C.P. 9, Piracicaba, SP, 13418-900, Brazil. Increasing crop water productivity is a key factor where water is scarce compared with land and other resources. A widespread method for water use assessment is the water productivity (WP) approach which is the ratio between biomass production per unit of water utilized. WP is useful to evaluate water utilization and to identify where and when water can be saved in an irrigation system. Traditionally, field experiments are conducted to quantify and evaluate water management practices in irrigation systems. This field trial was conducted in Jaú - São Paulo State (Lat 22.17° S, Long 48.32° W) during first and second ratoon cycles. Four treatments were appraised; rainfed only (R0); rainfed + 150 kg ha-1 of N (RN); irrigation only (I0) and irrigation + 150 kg ha-1 of N (IN). The subsurface drip irrigation was carried out considering the crop evapotranspiration (ETc) to restore 100% of evapotranspired water. The irrigation frequency was considered the water supply to the soil by precipitation and the atmospheric demand for sugarcane ETc, with a maximum soil storage capacity of 70 mm. Our results point that the WP in irrigated condition was 13% higher than rainfed field whereas for N application, WP reached even higher values, 40%. WP among all treatments showed better results for IN (~28 kg mm-1) followed by RN (~23 kg mm-1); I0 (~16 kg mm-1) and R0 (~15 kg mm-1). Those results are in agreement with some studies which suggest high synergy between water and nitrogen for the

  12. Defective TFH Cell Function and Increased TFR Cells Contribute to Defective Antibody Production in Aging.

    Science.gov (United States)

    Sage, Peter T; Tan, Catherine L; Freeman, Gordon J; Haigis, Marcia; Sharpe, Arlene H

    2015-07-14

    Defective antibody production in aging is broadly attributed to immunosenescence. However, the precise immunological mechanisms remain unclear. Here, we demonstrate an increase in the ratio of inhibitory T follicular regulatory (TFR) cells to stimulatory T follicular helper (TFH) cells in aged mice. Aged TFH and TFR cells are phenotypically distinct from those in young mice, exhibiting increased programmed cell death protein-1 expression but decreased ICOS expression. Aged TFH cells exhibit defective antigen-specific responses, and programmed cell death protein-ligand 1 blockade can partially rescue TFH cell function. In contrast, young and aged TFR cells have similar suppressive capacity on a per-cell basis in vitro and in vivo. Together, these studies reveal mechanisms contributing to defective humoral immunity in aging: an increase in suppressive TFR cells combined with impaired function of aged TFH cells results in reduced T-cell-dependent antibody responses in aged mice. Copyright © 2015 The Authors. Published by Elsevier Inc. All rights reserved.

  13. Selective breeding for increased pheromone production in the boll weevil (Coleoptera: Curculionidae)

    International Nuclear Information System (INIS)

    McCoy, J.R.; Wright, J.E.

    1990-01-01

    The male boll weevil, Anthonomus grandis grandis Boheman, uses an aggregating pheromone to attract females, after which mating often occurs. Sterile boll weevil release programs depend upon this phenomenon to produce sterile matings with feral females. In an effort to increase the effectiveness of the individual sterile male and thereby reduce the number of sterile males required per hectare, a selective-breeding system was used to increase the total pheromone produced by individual male boll weevils. This breeding program increased the total pheromone production by individual male boll weevils to 4.5 times that of the parent population. After irradiation-induced sterilization, there remained 2.2 times more pheromone produced by the selected strain. Therefore, these sterile weevils should be about 2.2 times more attractive to feral females than the parent weevils now in use, and they have the potential to reduce the number of sterile males required in a sterile release program

  14. Matrix metalloproteinase-14 mediates a phenotypic shift in the airways to increase mucin production.

    Science.gov (United States)

    Deshmukh, Hitesh S; McLachlan, Anne; Atkinson, Jeffrey J; Hardie, William D; Korfhagen, Thomas R; Dietsch, Maggie; Liu, Yang; Di, Peter Y P; Wesselkamper, Scott C; Borchers, Michael T; Leikauf, George D

    2009-11-01

    Induced mainly by cigarette smoking, chronic obstructive pulmonary disease (COPD) is a global public health problem characterized by progressive difficulty in breathing and increased mucin production. Previously, we reported that acrolein levels found in COPD sputum could activate matrix metalloproteinase-9 (MMP9). To determine whether acrolein increases expression and activity of MMP14, a critical membrane-bound endopeptidase that can initial a MMP-activation cascade. MMP14 activity and adduct formation were measured following direct acrolein treatment. MMP14 expression and activity was measured in human airway epithelial cells. MMP14 immunohistochemistry was performed with COPD tissue, and in acrolein- or tobacco-exposed mice. In a cell-free system, acrolein, in concentrations equal to those found in COPD sputum, directly adducted cysteine 319 in the MMP14 hemopexin-like domain and activated MMP14. In cells, acrolein increased MMP14 activity, which was inhibited by a proprotein convertase inhibitor, hexa-d-arginine. In the airway epithelium of COPD subjects, immunoreactive MMP14 protein increased. In mouse lung, acrolein or tobacco smoke increased lung MMP14 activity and protein. In cells, acrolein-induced MMP14 transcripts were inhibited by an epidermal growth factor receptor (EGFR) neutralizing antibody, EGFR kinase inhibitor, metalloproteinase inhibitor, or mitogen-activated protein kinase (MAPK) 3/2 or MAPK8 inhibitors, but not a MAPK14 inhibitor. Decreasing the MMP14 protein and activity in vitro by small interfering (si)RNA to MMP14 diminished the acrolein-induced MUC5AC transcripts. In acrolein-exposed mice or transgenic mice with lung-specific transforming growth factor-alpha (an EGFR ligand) expression, lung MMP14 and MUC5AC levels increased and these effects were inhibited by a EGFR inhibitor, erlotinib. Taken together, these findings implicate acrolein-induced MMP14 expression and activity in mucin production in COPD.

  15. Pulsed Electric Field inactivation of microbial cells: the use of ceramic layers to increase the efficiency of treatment

    International Nuclear Information System (INIS)

    Pizzichemi, M.

    2009-01-01

    The impact of Pulsed Electric Fields (PEF) on bacteria and plant or animal cells has been investigated since the early 1960s. High electric fields pulses (20-70 kV/cm, 1-10 μs) are reported to cause rupture of the cellular lipid membrane, through the mechanism of irreversible electroporation. Quantitative description of cell inactivation kinetics is based on the analysis of stability of lipid bilayers under electric fields and the thermal fluctuations associated with the production of pores. PEF has been successfully applied to inactivation of both Gram-positive and Gram-negative bacteria in many sorts of liquids, such as milk, fruit juices and liquid eggs. In all these media, the level of inactivation could reach the 5 Logs for an approximate range of pulses of 100-200, and an energy consumption of ∼ 10-100 kJ/kg. The advantages of PEF are the superior maintenance of functional and nutritional levels (if compared to traditional thermal treatment), continuous treatment and short processing times, while the current high costs of this technique make it more suitable for treatment of expensive media. We present a solution to the problem of volumes in PEF treatment through the use of high permittivity ceramics, while retaining the same inactivation efficiency and improving the duration of the electrodes.

  16. Pulsed Electric Field inactivation of microbial cells: the use of ceramic layers to increase the efficiency of treatment

    Science.gov (United States)

    Pizzichemi, M.

    2009-12-01

    The impact of Pulsed Electric Fields (PEF) on bacteria and plant or animal cells has been investigated since the early 1960s. High electric fields pulses (20-70 kV/cm, 1-10 μs) are reported to cause rupture of the cellular lipid membrane, through the mechanism of irreversible electroporation. Quantitative description of cell inactivation kinetics is based on the analysis of stability of lipid bilayers under electric fields and the thermal fluctuations associated with the production of pores. PEF has been successfully applied to inactivation of both Gram-positive and Gram-negative bacteria in many sorts of liquids, such as milk, fruit juices and liquid eggs. In all these media, the level of inactivation could reach the 5 Logs for an approximate range of pulses of 100-200, and an energy consumption of ˜ 10-100 kJ/kg. The advantages of PEF are the superior maintenance of functional and nutritional levels (if compared to traditional thermal treatment), continuous treatment and short processing times, while the current high costs of this technique make it more suitable for treatment of expensive media. We present a solution to the problem of volumes in PEF treatment through the use of high permittivity ceramics, while retaining the same inactivation efficiency and improving the duration of the electrodes.

  17. Pulsed Electric Field inactivation of microbial cells: the use of ceramic layers to increase the efficiency of treatment

    Energy Technology Data Exchange (ETDEWEB)

    Pizzichemi, M. [Physics Department, University of Milano - Bicocca (Italy)

    2009-12-15

    The impact of Pulsed Electric Fields (PEF) on bacteria and plant or animal cells has been investigated since the early 1960s. High electric fields pulses (20-70 kV/cm, 1-10 mus) are reported to cause rupture of the cellular lipid membrane, through the mechanism of irreversible electroporation. Quantitative description of cell inactivation kinetics is based on the analysis of stability of lipid bilayers under electric fields and the thermal fluctuations associated with the production of pores. PEF has been successfully applied to inactivation of both Gram-positive and Gram-negative bacteria in many sorts of liquids, such as milk, fruit juices and liquid eggs. In all these media, the level of inactivation could reach the 5 Logs for an approximate range of pulses of 100-200, and an energy consumption of approx 10-100 kJ/kg. The advantages of PEF are the superior maintenance of functional and nutritional levels (if compared to traditional thermal treatment), continuous treatment and short processing times, while the current high costs of this technique make it more suitable for treatment of expensive media. We present a solution to the problem of volumes in PEF treatment through the use of high permittivity ceramics, while retaining the same inactivation efficiency and improving the duration of the electrodes.

  18. Standardization of process for increased production of pure and potent tetanus toxin

    Directory of Open Access Journals (Sweden)

    Chellamani Muniandi

    2013-09-01

    Full Text Available When stationary pot culture was replaced by submerged cultivation of Clostridium tetani, an anaerobic organism, in afermentor using a vibromixer and optimum supply of sterile air to the headspace of the fermentor to flush out the accumulatedgases, a significant increase in the tetanus toxin yield in a short time cultivation (about 5 to 6 days against8 days was noticed. It was found that under optimal conditions of temperature, vibromixing, surface aeration, and analkaline pH favored toxin release. Furthermore, to enhance the production volume, fermentor culture is more suitable.The tetanus toxin was produced with good Limes flocculation (Lf titre and high antigenic purity. Under optimal conditions,the papain digest broth was successfully substituted in place of N.Z Case for the production of pure and potenttetanus toxin. J Microbiol Infect Dis 2013; 3(3: 133-139Key words: Clostridium tetani, modified mueller miller medium, papain digest, limes flocculation

  19. Prodigiosin pigment of Serratia marcescens is associated with increased biomass production.

    Science.gov (United States)

    Haddix, Pryce L; Shanks, Robert M Q

    2018-04-03

    Serratia marcescens is a gram-negative, facultatively-anaerobic bacterium and opportunistic pathogen which produces the red pigment prodigiosin. We employed both batch culture and chemostat growth methods to investigate prodigiosin function in the producing organism. Pigmentation correlated with an increased rate of ATP production during population lag phase. Results with a lacZ transcriptional fusion to the prodigiosin (pig) biosynthetic operon revealed that operon transcription is activated by low cellular levels of ATP at high cell density. Furthermore, these data enabled estimation of the ATP per cell minimum value at which the operon is induced. Pigmented cells were found to accumulate ATP more rapidly and to multiply more quickly than non-pigmented cells during the high density growth phase. Finally, results with both batch and chemostat culture revealed that pigmented cells grow to approximately twice the biomass yield as non-pigmented S. marcescens bacteria. Prodigiosin production may, therefore, provide a growth advantage at ambient temperatures.

  20. Increased production of peptide deformylase eliminates retention of formylmethionine in bovine somatotropin overproduced in Escherichia coli.

    Science.gov (United States)

    Warren, W C; Bentle, K A; Schlittler, M R; Schwane, A C; O'Neil, J P; Bogosian, G

    1996-10-03

    In Escherichia coli and most other microorganisms, peptide synthesis is started at methionine start codons which are read only by N-formyl-methionine-tRNA. The formyl group is normally removed from the N-terminal Met residue of the peptide by peptide deformylase (PDF). However, it has been observed that overproduction of proteins in recombinant bacteria often yields protein products which are incompletely deformylated. Certain proteins could be poor substrates for PDF and exhibit incomplete deformylation, particularly when they are overproduced. Strains of E. coli which overproduce bovine somatotropin (BST) have a significant fraction of the BST with the formyl group retained. The PDF gene was isolated and positioned into a BST production vector in such a way that the BST and PDF genes were coexpressed. In strains containing this coexpression vector, the levels of PDF were increased and formylated BST was undetectable.

  1. The use of hypermedia to increase the productivity of software development teams

    Science.gov (United States)

    Coles, L. Stephen

    1991-01-01

    Rapid progress in low-cost commercial PC-class multimedia workstation technology will potentially have a dramatic impact on the productivity of distributed work groups of 50-100 software developers. Hypermedia/multimedia involves the seamless integration in a graphical user interface (GUI) of a wide variety of data structures, including high-resolution graphics, maps, images, voice, and full-motion video. Hypermedia will normally require the manipulation of large dynamic files for which relational data base technology and SQL servers are essential. Basic machine architecture, special-purpose video boards, video equipment, optical memory, software needed for animation, network technology, and the anticipated increase in productivity that will result for the introduction of hypermedia technology are covered. It is suggested that the cost of the hardware and software to support an individual multimedia workstation will be on the order of $10,000.

  2. Increasing Research Productivity and Professional Development in Psychology With a Writing Retreat.

    Science.gov (United States)

    Stanley, Ian H; Hom, Melanie A; Chu, Carol; Joiner, Thomas E

    2017-09-01

    Writing is a core feature of the training requirements and career demands of psychology faculty members and graduate students. Within academic psychology, specifically, writing is vital for the generation of scientific knowledge through manuscripts and grant applications. Although resources exist regarding how to improve one's writing skills, few models have been described regarding how to promote a culture of writing productivity that realizes tangible deliverables, such as manuscripts and grant applications. In this article, we discuss the rationale, model, and initial outcome data of a writing retreat developed and implemented to increase research productivity among psychology faculty and trainees. We also review best practices for conducting writing retreats and identify key areas for future SoTL on advancing writing.

  3. Reticle inspection equipment productivity increase using SEMI specification for reticle and pod management

    Science.gov (United States)

    Taylor, Ron; Downey, Jack; Wood, Jeffrey; Lin, Yen-Hung; Bugata, Bharathi; Fan, Dongsheng; Hess, Carl; Wylie, Mark

    2016-10-01

    In this work, the SEMI specification for reticle and pod management (E109) with internal reticle library support has been integrated for the first time on KLA-Tencor's TeronTM and TeraScanTM reticle inspection tools. Manufacturing Execution System scheduling reticle jobs and Automated Material Handling System scheduling to transfer pods simultaneously have also been integrated and tested. GLOBALFOUNDRIES collaboratively worked with KLA-Tencor to successfully implement these capabilities. Both library and non-library scenarios have been demonstrated for comparison in a real production environment resulting in productivity increase of approximately 29% by making use of the library. Reticle re-qualification test cases were used for the comparison in this work.

  4. Nitrate Increased Cucumber Tolerance to Fusarium Wilt by Regulating Fungal Toxin Production and Distribution

    Directory of Open Access Journals (Sweden)

    Jinyan Zhou

    2017-03-01

    Full Text Available Cucumber Fusarium wilt, induced by Fusarium oxysporum f. sp. cucumerinum (FOC, causes severe losses in cucumber yield and quality. Nitrogen (N, as the most important mineral nutrient for plants, plays a critical role in plant–pathogen interactions. Hydroponic assays were conducted to investigate the effects of different N forms (NH4+ vs. NO3‒ and supply levels (low, 1 mM; high, 5 mM on cucumber Fusarium wilt. The NO3‒-fed cucumber plants were more tolerant to Fusarium wilt compared with NH4+-fed plants, and accompanied by lower leaf temperature after FOC infection. The disease index decreased as the NO3‒ supply increased but increased with the NH4+ level supplied. Although the FOC grew better under high NO3− in vitro, FOC colonization and fusaric acid (FA production decreased in cucumber plants under high NO3− supply, associated with lower leaf membrane injury. There was a positive correlation between the FA content and the FOC number or relative membrane injury. After the exogenous application of FA, less FA accumulated in the leaves under NO3− feeding, accompanied with a lower leaf membrane injury. In conclusion, higher NO3− supply protected cucumber plants against Fusarium wilt by suppressing FOC colonization and FA production in plants, and increasing the plant tolerance to FA.

  5. Nitrate Increased Cucumber Tolerance to Fusarium Wilt by Regulating Fungal Toxin Production and Distribution.

    Science.gov (United States)

    Zhou, Jinyan; Wang, Min; Sun, Yuming; Gu, Zechen; Wang, Ruirui; Saydin, Asanjan; Shen, Qirong; Guo, Shiwei

    2017-03-11

    Cucumber Fusarium wilt, induced by Fusarium oxysporum f. sp. cucumerinum (FOC), causes severe losses in cucumber yield and quality. Nitrogen (N), as the most important mineral nutrient for plants, plays a critical role in plant-pathogen interactions. Hydroponic assays were conducted to investigate the effects of different N forms (NH₄⁺ vs. NO₃ ‒ ) and supply levels (low, 1 mM; high, 5 mM) on cucumber Fusarium wilt. The NO₃ ‒ -fed cucumber plants were more tolerant to Fusarium wilt compared with NH₄⁺-fed plants, and accompanied by lower leaf temperature after FOC infection. The disease index decreased as the NO₃ ‒ supply increased but increased with the NH₄⁺ level supplied. Although the FOC grew better under high NO₃ - in vitro, FOC colonization and fusaric acid (FA) production decreased in cucumber plants under high NO₃ - supply, associated with lower leaf membrane injury. There was a positive correlation between the FA content and the FOC number or relative membrane injury. After the exogenous application of FA, less FA accumulated in the leaves under NO₃ - feeding, accompanied with a lower leaf membrane injury. In conclusion, higher NO₃ - supply protected cucumber plants against Fusarium wilt by suppressing FOC colonization and FA production in plants, and increasing the plant tolerance to FA.

  6. Fructose increases corticosterone production in association with NADPH metabolism alterations in rat epididymal white adipose tissue.

    Science.gov (United States)

    Prince, Paula D; Santander, Yanina A; Gerez, Estefania M; Höcht, Christian; Polizio, Ariel H; Mayer, Marcos A; Taira, Carlos A; Fraga, Cesar G; Galleano, Monica; Carranza, Andrea

    2017-08-01

    Metabolic syndrome is an array of closely metabolic disorders that includes glucose intolerance/insulin resistance, central obesity, dyslipidemia, and hypertension. Fructose, a highly lipogenic sugar, has profound metabolic effects in adipose tissue, and has been associated with the etiopathology of many components of the metabolic syndrome. In adipocytes, the enzyme 11 β-HSD1 amplifies local glucocorticoid production, being a key player in the pathogenesis of central obesity and metabolic syndrome. 11 β-HSD1 reductase activity is dependent on NADPH, a cofactor generated by H6PD inside the endoplasmic reticulum. Our focus was to explore the effect of fructose overload on epididymal white adipose tissue (EWAT) machinery involved in glucocorticoid production and NADPH and oxidants metabolism. Male Sprague-Dawley rats fed with a fructose solution (10% (w/v) in tap water) during 9 weeks developed some characteristic features of metabolic syndrome, such as hypertriglyceridemia, and hypertension. In addition, high levels of plasma and EWAT corticosterone were detected. Activities and expressions of H6PD and 11 β-HSD1, NAPDH content, superoxide anion production, expression of NADPH oxidase 2 subunits, and indicators of oxidative metabolism were measured. Fructose overloaded rats showed an increased potential in oxidant production respect to control rats. In parallel, in EWAT from fructose overloaded rats we found higher expression/activity of H6PD and 11 β-HSD1, and NADPH/NADP + ratio. Our in vivo results support that fructose overload installs in EWAT conditions favoring glucocorticoid production through higher H6PD expression/activity supplying NADPH for enhanced 11 β-HSD1 expression/activity, becoming this tissue a potential extra-adrenal source of corticosterone under these experimental conditions. Copyright © 2017 Elsevier Inc. All rights reserved.

  7. Egg quality in layers housed in different production systems and submitted to two environmental conditions

    Directory of Open Access Journals (Sweden)

    JAD Barbosa Filho

    2006-03-01

    Full Text Available The production system using cages is a highly polemical issue in Europe, because of the space restriction imposed to laying hens. It is considered that the cage system might compromise important comfort movements, welfare and egg quality. This study evaluated egg quality and welfare of two strains of hens housed in a conventional system (battery laying cages or litter system with nest and perches, and submitted to heat stress or comfort conditions. Two groups of 20 birds (10 Hy-line W36 and 10 Hy-line Brown were submitted to two environmental conditions (26°C and 60% RH or 35°C and 70% RH and two housing systems (cages or litter in the early production phase. Egg quality was analyzed based on egg weight, eggshell thickness, specific gravity, and Haugh units. Yolk and shell contamination by Salmonella sp was also assessed. A significant (p<0.05 reduction in quality parameters was observed in eggs produced by laying hens under heat stress, mainly in the birds housed in cages.

  8. Increasing Goat Productivity Through the Improvement of Endogenous Secretion of Pregnant Hormones Using Follicle Stimulating Hormone

    Directory of Open Access Journals (Sweden)

    Andriyanto Andriyanto

    2011-05-01

    Full Text Available Abstract. Previous studies reported that the improvement of endogenous estrogen and progesterone secretions during gestation improved fetal prenatal growth, birth weight, mammary gland growth and development, milk production, litter size, pre- and post-weaning growths. An experiment was conducted to apply the improvement of endogenous secretion of pregnant hormones during pregnancy to increase goat productivity. Thirty-six female ettawah-cross does were divided into 2 groups. Group 1 (control: 18 does included does without improvement of endogenous secretion of pregnant hormones and Group 2 (treatment: 18 does included does with improvement of endogenous secretion of pregnant hormones using follicle stimulating hormones to stimulate super ovulation. The application of this technology increased total offspring born (control: 25 offspring; treatment: 42 offspring, average litter size (control: 1.88; treatment: 2.33, offspring birth weight (control: 2.85±0.50 kg; treatment: 3.82±0.40 kg, and does milk production (control: 1.36±0.34 L/does/day; treatment: 2.10±0.21 L/does/day. Offspring born to does with improved endogenous secretion of pregnant hormones had better weaning weight (control: 11.17±1.99 kg/offspring; treatment: 14.5±1.11 kg/offspring. At weaning period, does with improved endogenous secretion of pregnant hormones produced offspring with total weaning weight twice as heavy as control does (control: 189.9 kg; treatment: 403.6 kg. By a simple calculation of economic analysis, this technology application could increase gross revenue per does until weaning by Rp. 432.888,89. It was concluded that this technology is economically feasible to be applied in small-scale farm. Key Words: follicle stimulating hormone, pregnant hormones, endogenous secretion, super ovulation, ettawah-cross does

  9. Increasing the productivity of short-rotation Populus plantations. Final report

    Energy Technology Data Exchange (ETDEWEB)

    DeBell, D.S.; Harrington, C.A.; Clendenen, G.W.; Radwan, M.A.; Zasada, J.C. [Forest Service, Olympia, WA (United States). Pacific Northwest Research Station

    1997-12-31

    This final report represents the culmination of eight years of biological research devoted to increasing the productivity of short rotation plantations of Populus trichocarpa and Populus hybrids in the Pacific Northwest. Studies provide an understanding of tree growth, stand development and biomass yield at various spacings, and how patterns differ by Populus clone in monoclonal and polyclonal plantings. Also included is some information about factors related to wind damage in Populus plantings, use of leaf size as a predictor of growth potential, and approaches for estimating tree and stand biomass and biomass growth. Seven research papers are included which provide detailed methods, results, and interpretations on these topics.

  10. Short-term dehydroepiandrosterone treatment increases platelet cGMP production in elderly male subjects.

    Science.gov (United States)

    Martina, Valentino; Benso, Andrea; Gigliardi, Valentina Ramella; Masha, Andi; Origlia, Carla; Granata, Riccarda; Ghigo, Ezio

    2006-03-01

    Several clinical and population-based studies suggest that dehydroepiandrosterone (DHEA) and its sulphate (DHEA-S) play a protective role against atherosclerosis and coronary artery disease in human. However, the mechanisms underlying this action are still unknown. It has recently been suggested that DHEA-S could delay atheroma formation through an increase in nitric oxide (NO) production. Twenty-four aged male subjects [age (mean +/- SEM): 65.4 +/- 0.7 year; range: 58.2-67.6 years] underwent a blinded placebo controlled study receiving DHEA (50 mg p.o. daily at bedtime) or placebo for 2 months. Platelet cyclic guanosine-monophosphate (cGMP) concentration (as marker of NO production) and serum levels of DHEA-S, DHEA, IGF-I, insulin, glucose, oestradiol (E(2)), testosterone, plasminogen activator inhibitor (PAI)-1 antigen (PAI-1 Ag), homocysteine and lipid profile were evaluated before and after the 2-month treatment with DHEA or placebo. At the baseline, all variables in the two groups were overlapping. All parameters were unchanged after treatment with placebo. Conversely, treatment with DHEA (a) increased (P < 0.001 vs. baseline) platelet cGMP (111.9 +/- 7.1 vs. 50.1 +/- 4.1 fmol/10(6) plts), DHEA-S (13.6 +/- 0.8 vs. 3.0 +/- 0.3 micromol/l), DHEA (23.6 +/- 1.7 vs. 15.3 +/- 1.4 nmol/l), testosterone (23.6 +/- 1.0 vs. 17.7 +/- 1.0 nmol/l) and E(2) (72.0 +/- 5.0 vs. 60.0 +/- 4.0 pmol/l); and (b) decreased (P < 0.05 vs. baseline) PAI-1 Ag (27.4 +/- 3.8 vs. 21.5 +/- 2.5 ng/ml) and low-density lipoprotein (LDL) cholesterol (3.4 +/- 0.2 vs. 3.0 +/- 0.2 mmol/l). IGF-I, insulin, glucose, triglycerides, total cholesterol, HDL cholesterol, HDL2 cholesterol, HDL3 cholesterol, apolipoprotein A1 (ApoA1), apolipoprotein B (ApoB) and homocysteine levels were not modified by DHEA treatment. This study shows that short-term treatment with DHEA increased platelet cGMP production, a marker of NO production, in healthy elderly subjects. This effect is coupled with a decrease in PAI-1

  11. Effects of Increasing Prepartum Dietary Protein Level Using Poultry by-Product Meal on Productive Performance and Health of Multiparous

    Directory of Open Access Journals (Sweden)

    M Hossein Yazdi

    2011-12-01

    Full Text Available The aim of this study was to compare the effects of two levels of crude protein using poultry by-product meals (PBPM fed during late gestation on the performance, blood metabolites, and colostrum composition of Holstein dairy cows. Sixteen multiparous cows 26±6 d before expected calving were assigned randomly to two treatments containing 1 14% and 2 16% crude protein. The cow’s BCS was 3.56 ± 0.5 on average, at the beginning of the trial. Yields of milk, protein, lactose, fat, and SNF were not affected by prepartum dietary CP level. Colostrum composition (fat, CP and Total solids, blood metabolites (Ca, Glucose, Total protein, Albumin, Globulin and Urea N, and metabolic diseases incidence were not influenced by prepartum dietary CP level. There was no significant difference between treatments in body weight and BCS changes. As expected, blood urea N before calving was higher in the cows fed 16% CP diets. Serum cholesterol during prepartum and postpartum periods was significantly decreased as the CP increased in the diet. In general, although postpartum glucose level increased in cows which received 16% CP in the diet, it seems that no other obvious advantages over feeding the 14% CP diet are apparent. So feeding this last diet is recommended to close up cows.

  12. Dexamethasone increases glucose cycling, but not glucose production, in healthy subjects

    International Nuclear Information System (INIS)

    Wajngot, A.; Khan, A.; Giacca, A.; Vranic, M.; Efendic, S.

    1990-01-01

    We established that measurement of glucose fluxes through glucose-6-phosphatase (G-6-Pase; hepatic total glucose output, HTGO), glucose cycling (GC), and glucose production (HGP), reveals early diabetogenic changes in liver metabolism. To elucidate the mechanism of the diabetogenic effect of glucocorticoids, we treated eight healthy subjects with oral dexamethasone (DEX; 15 mg over 48 h) and measured HTGO with [2-3H]glucose and HGP with [6-3H]glucose postabsorptively and during a 2-h glucose infusion (11.1 mumol.kg-1.min-1). [2-3H]- minus [6-3H]glucose equals GC. DEX significantly increased plasma glucose, insulin, C peptide, and HTGO, while HGP was unchanged. In controls and DEX, glucose infusion suppressed HTGO (82 vs. 78%) and HGP (87 vs. 91%). DEX increased GC postabsorptively (three-fold) P less than 0.005 and during glucose infusion (P less than 0.05) but decreased metabolic clearance and glucose uptake (Rd), which eventually normalized, however. Because DEX increased HTGO (G-6-Pase) and not HGP (glycogenolysis + gluconeogenesis), we assume that DEX increases HTGO and GC in humans by activating G-6-Pase directly, rather than by expanding the glucose 6-phosphate pool. Hyperglycemia caused by peripheral effects of DEX can also contribute to an increase in GC by activating glucokinase. Therefore, measurement of glucose fluxes through G-6-Pase and GC revealed significant early effects of DEX on hepatic glucose metabolism, which are not yet reflected in HGP

  13. Cold stress improves the production of artemisinin depending on the increase in endogenous jasmonate.

    Science.gov (United States)

    Liu, Wanhong; Wang, Huanyan; Chen, Yupei; Zhu, Shunqin; Chen, Min; Lan, Xiaozhong; Chen, Guoping; Liao, Zhihua

    2017-05-01

    Previous publications reported that the artemisinin level was increased in Artemisia annua following a night-frost period. However, the molecular mechanism was not clear. In this study, we found that exogenous jasmonate (JA) effectively enhanced the freezing tolerance of A. annua. The JA biosynthetic genes (LOX1, LOX2, allene oxide cyclase [AOC], and jasmonate resistant 1 [JAR1]) were induced by cold stress, leading to an increase in endogenous JA in cold-treated A. annua. Increased endogenous JA enhanced the expression of three JA-responsive transcription factors, ethylene response factor 1, ethylene response factor 2, and octadecanoid-responsive AP2/ERF, all of which were reported to transcriptionally activate the expression of artemisinin biosynthetic genes, such as amorpha-4,11-diene synthase (ADS), CYP71AV1, DBR2, and aldehyde dehydrogenase 1 (ALDH1). Furthermore, the expression levels of the four artemisinin biosynthetic genes were also significantly increased under cold stress. Consequently, the levels of artemisinin and related secondary metabolites, such as dihydroartemisinic acid, artemisinin B, and artemisinic acid, were increased in A. annua under cold stress. Our study points to a molecular mechanism in which the production of artemisinin is regulated by cold stress in A. annua. © 2016 International Union of Biochemistry and Molecular Biology, Inc.

  14. Carbon storage potential increases with increasing ratio of C4 to C3 grass cover and soil productivity in restored tallgrass prairies.

    Science.gov (United States)

    Spiesman, Brian J; Kummel, Herika; Jackson, Randall D

    2018-02-01

    Long-term soil carbon (C) storage is essential for reducing CO 2 in the atmosphere. Converting unproductive and environmentally sensitive agricultural lands to grasslands for bioenergy production may enhance C storage. However, a better understanding of the interacting effects of grass functional composition (i.e., relative abundance of C 4 and C 3 grass cover) and soil productivity on C storage will help guide sustainable grassland management. Our objective was to examine the relationship between grass functional composition and potential C storage and how it varies with potential soil productivity. We estimated C inputs from above- and belowground net primary productivity (ANPP and BNPP), and heterotrophic respiration (R H ) to calculate net ecosystem production (NEP), a measure of potential soil C storage, in grassland plots of relatively high- and low-productivity soils spanning a gradient in the ratio of C 4 to C 3 grass cover (C 4 :C 3 ). NEP increased with increasing C 4 :C 3 , but only in potentially productive soils. The positive relationship likely stemmed from increased ANPP, rather than BNPP, which was possibly related to efficient resource-use and physiological/anatomical advantages of C 4 plants. R H was negatively correlated with C 4 :C 3 , possibly because of changes in microclimate or plant-microbe interactions. It is possible that in potentially productive soils, C storage can be enhanced by favoring C 4 over C 3 grasses through increased ANPP and BNPP and reduced R H . Results also suggest that potential C storage gains from C 4 productivity would not be undermined by a corresponding increase in R H .

  15. Increasing productivity by matching farming system management and genotype in water-limited environments.

    Science.gov (United States)

    Kirkegaard, J A; Hunt, J R

    2010-10-01

    Improvements in water productivity and yield arise from interactions between varieties (G) and their management (M). Most G×M interactions considered by breeders and physiologists focus on in-crop management (e.g. sowing time, plant density, N management). However, opportunities exist to capture more water and use it more effectively that involve judicious management of prior crops and fallows (e.g. crop sequence, weed control, residue management). The dry-land wheat production system of southern Australia, augmented by simulation studies, is used to demonstrate the relative impacts and interactions of a range of pre-crop and in-crop management decisions on water productivity. A specific case study reveals how a novel genetic trait, long coleoptiles that enable deeper sowing, can interact with different management options to increase the water-limited yield of wheat from 1.6 t ha(-1) to 4.5 t ha(-1), reflecting the experience of leading growers. Understanding such interactions will be necessary to capture benefits from new varieties within the farming systems of the future.

  16. Increased food production and reduced water use through optimized crop distribution

    Science.gov (United States)

    Davis, Kyle Frankel; Rulli, Maria Cristina; Seveso, Antonio; D'Odorico, Paolo

    2017-12-01

    Growing demand for agricultural commodities for food, fuel and other uses is expected to be met through an intensification of production on lands that are currently under cultivation. Intensification typically entails investments in modern technology — such as irrigation or fertilizers — and increases in cropping frequency in regions suitable for multiple growing seasons. Here we combine a process-based crop water model with maps of spatially interpolated yields for 14 major food crops to identify potential differences in food production and water use between current and optimized crop distributions. We find that the current distribution of crops around the world neither attains maximum production nor minimum water use. We identify possible alternative configurations of the agricultural landscape that, by reshaping the global distribution of crops within current rainfed and irrigated croplands based on total water consumption, would feed an additional 825 million people while reducing the consumptive use of rainwater and irrigation water by 14% and 12%, respectively. Such an optimization process does not entail a loss of crop diversity, cropland expansion or impacts on nutrient and feed availability. It also does not necessarily invoke massive investments in modern technology that in many regions would require a switch from smallholder farming to large-scale commercial agriculture with important impacts on rural livelihoods.

  17. Increase of the productivity of pleurotus ostreatus and their use in the petroleum biodegradation

    International Nuclear Information System (INIS)

    Cardona U, Fernando; Restrepo R, Dora Patricia; Nino, Pilar; Gonzalez, Raul

    2002-01-01

    This work is divided in two phases: in the first one a substrate what help to increase productivity of the white-rot fungi pleurotus ostreatus was looked, this was reached combining different kinds of substrates; in the second phase, the contribution in biodegradation of pleurotus ostreatus into the substrate obtained in the first phase and contaminated with heavy part of Cusiana oil was looked. The quantification in the augmentation of productivity was obtained taking the weight of fungi collected of each substrate and comparing it between the, until finding the best one. To quantify the biodegradation the method of determination of greases, oils, and hydrocarbons of petroleum in solids by Soxhlet method was used. The highest substrate in productivity was the mix of 70% of cotton quinine and 30% of hay with 3- 5% of seed, thiamine and vegetable oil. For the biodegradation study concentration less than 25% were used, at higher concentrations a partial inhibition was detected. When the substrate was contaminated with 10% of Cusiana oil the biodegradation was more efficient

  18. Strategies to increase cellulase production with submerged fermentation using fungi isolated from the Brazilian biome

    Directory of Open Access Journals (Sweden)

    Genilton da Silva Faheina Junior

    2015-03-01

    Full Text Available Studies on new microbial sources of cellulase and accurate assessment of the steps that increase cellulase production are essential strategies to reduce costs of various processes using such enzymes. This study aimed at the selection of cellulase-producing filamentous fungi, and at the research of parameters involving cellulase production by submerged fermentation. The first test consisted of selecting the best cellulase-producing microorganisms (FPase in Erlenmeyer flasks containing 200 mL of specific growth medium. The next test was designed to further investigate the enzyme production in fermentation with four types of soluble sugars: glucose, lactose, sucrose and xylose. In bioreactor tests, three different inoculation strategies were analyzed. The best FPase activity was presented by the strain Trichoderma sp. CMIAT 041 (49.9 FPU L-1 and CMCase by the fungus Lasiodiplodia theobromae CMIAT 096 (350.0 U L-1. Sucrose proved to be the best option among the soluble sugars tested, with higher rates of FPase activity (49.9 FPU L-1 and CMCase (119.7 U L-1. The best inoculation strategy for the bioreactor was a spore suspension obtained from a semi-solid state fermentation of wheat bran for 72h.

  19. Concepts of increasing productivity and reducing the processing cost of machine parts

    Directory of Open Access Journals (Sweden)

    О. С. Кленов

    2017-06-01

    Full Text Available The basic conditions to reduce the cost of processing technology and improve productivity through the use of modern cutting tools produced by leading foreign firms producing tools have been appraised from theory in the work. Theoretically, it has been found that an increase in the cost of processing varies according to extremum dependence, passing the minimum point. It is possible to reduce the minimum processing cost due to the increase of productivity using cutting edge tools, characterized by a high capacity for work in high cutting temperatures. The criterion showing the technological price cost minimum is the ratio of the expenditures on workers’ wages to the expenditures on the cutting tools, it being quite specific for various processing conditions. To analyze the possibilities of practical use of the proposed criterion, a complex of experimental researches of the technological prime cost and productivity of the processing with hard alloy cutting tools with wear-resistant coatings produced by the company «Iscar» has been carried out. It has been established that their use makes it possible by more than one half to reduce the labour consumption and overall costs as compared to the hard alloy cutting tools traditionally used in home industry. It has been shown that this effect is achieved by increasing the cutting speed and feed due to increased wear resistance and heat resistance of the «Iscar» company tools. It was established that it is much more possible to achieve low processing cost at milling than at turning. It was stated with regard to all major expenditures including the workers' wages, the cost of the cutting tools, equipment and other costs, allowing more correctly estimate the cost-effectiveness of mechanical processing. Experiments confirmed that the main condition for reducing the processing cost to its minimum value is to increase the processing performance through the use of a heat-resistant and wear-resistant cutting

  20. Production of artificial ionospheric layers by frequency sweeping near the 2nd gyroharmonic

    Directory of Open Access Journals (Sweden)

    T. Pedersen

    2011-01-01

    Full Text Available Artificial ionospheric plasmas descending from the background F-region have been observed on multiple occasions at the High Frequency Active Auroral Research Program (HAARP facility since it reached full 3.6 MW power. Proximity of the transmitter frequency to the 2nd harmonic of the electron gyrofrequency (2fce has been noted as a requirement for their occurrence, and their disappearance after only a few minutes has been attributed to the increasing frequency mismatch at lower altitudes. We report new experiments employing frequency sweeps to match 2fce in the artificial plasmas as they descend. In addition to revealing the dependence on the 2fce resonance, this technique reliably produces descending plasmas in multiple transmitter beam positions and appears to increase their stability and lifetime. High-speed ionosonde measurements are used to monitor the altitude and density of the artificial plasmas during both the formation and decay stages.

  1. Oxy-fuel combustion as an alternative for increasing lime production in rotary kilns

    International Nuclear Information System (INIS)

    Granados, D.A.; Chejne, F.; Mejía, J.M.

    2015-01-01

    Highlights: • A one-dimensional model for oxy-fuel combustion in a rotary kiln was developed. • Flue gas recirculation becomes an important parameter for controlling the process. • Combustion process decreases the flame length making it more dense. • Increases of 12% in raw material with 40% of FGR and conversion of 98% was obtained. - Abstract: The effect of Flue Gas Recirculation (FGR) on the decarbonation process during oxy-fuel combustion in a lime (and cement) rotary kiln is analyzed using an unsteady one-dimensional Eulerian–Lagrangian mathematical model. The model considers gas and limestone as continuous phases and the coal particles as the discrete phase. The model predicts limestone decarbonation, temperature and species distribution of gas and solid phases along the kiln. Simulation results of an air-combustion case are successfully validated with reported experimental data. This model is used to study and to compare the conventional air combustion process with oxy-fuel combustion with FGR ratios between 30% and 80% as controller parameter in this process. Changes in decarbonation process due to energy fluxes by convection and radiation with different FGRs were simulated and analyzed. Simulation results indicate a temperature increase of 20% in the gas and solid phases and a higher decarbonation rate of 40% in relation to the air-combustion case, for a given constant fuel consumption rate. However, for a given temperature, the increase of the CO_2 partial pressure in the oxy-fuel case promotes a reduction of the decarbonation rate. Therefore, there is a compromise between FGR and decarbonation rate, which is analyzed in the present study. Simulation results of the decarbonation step in low FGR cases, compared to air-combustion case, shows that conversion takes place in shorter distances in the kiln, suggesting that the production rate can be increased for existing kilns in oxy-fuel kilns or, equivalently, shorter kilns can be designed for an

  2. Chronic high-sucrose diet increases fibroblast growth factor 21 production and energy expenditure in mice.

    Science.gov (United States)

    Maekawa, Ryuya; Seino, Yusuke; Ogata, Hidetada; Murase, Masatoshi; Iida, Atsushi; Hosokawa, Kaori; Joo, Erina; Harada, Norio; Tsunekawa, Shin; Hamada, Yoji; Oiso, Yutaka; Inagaki, Nobuya; Hayashi, Yoshitaka; Arima, Hiroshi

    2017-11-01

    Excess carbohydrate intake causes obesity in humans. On the other hand, acute administration of fructose, glucose or sucrose in experimental animals has been shown to increase the plasma concentration of anti-obesity hormones such as glucagon-like peptide 1 (GLP-1) and Fibroblast growth factor 21 (FGF21), which contribute to reducing body weight. However, the secretion and action of GLP-1 and FGF21 in mice chronically fed a high-sucrose diet has not been investigated. To address the role of anti-obesity hormones in response to increased sucrose intake, we analyzed mice fed a high-sucrose diet, a high-starch diet or a normal diet for 15 weeks. Mice fed a high-sucrose diet showed resistance to body weight gain, in comparison with mice fed a high-starch diet or control diet, due to increased energy expenditure. Plasma FGF21 levels were highest among the three groups in mice fed a high-sucrose diet, whereas no significant difference in GLP-1 levels was observed. Expression levels of uncoupling protein 1 (UCP-1), FGF receptor 1c (FGFR1c) and β-klotho (KLB) mRNA in brown adipose tissue were significantly increased in high sucrose-fed mice, suggesting increases in FGF21 sensitivity and energy expenditure. Expression of carbohydrate responsive element binding protein (ChREBP) mRNA in liver and brown adipose tissue was also increased in high sucrose-fed mice. These results indicate that FGF21 production in liver and brown adipose tissue is increased in high-sucrose diet and participates in resistance to weight gain. Copyright © 2017 The Authors. Published by Elsevier Inc. All rights reserved.

  3. Unequivocal detection of ozone recovery in the Antarctic Ozone Hole through significant increases in atmospheric layers with minimum ozone

    Science.gov (United States)

    de Laat, Jos; van Weele, Michiel; van der A, Ronald

    2015-04-01

    An important new landmark in present day ozone research is presented through MLS satellite observations of significant ozone increases during the ozone hole season that are attributed unequivocally to declining ozone depleting substances. For many decades the Antarctic ozone hole has been the prime example of both the detrimental effects of human activities on our environment as well as how to construct effective and successful environmental policies. Nowadays atmospheric concentrations of ozone depleting substances are on the decline and first signs of recovery of stratospheric ozone and ozone in the Antarctic ozone hole have been observed. The claimed detection of significant recovery, however, is still subject of debate. In this talk we will discuss first current uncertainties in the assessment of ozone recovery in the Antarctic ozone hole by using multi-variate regression methods, and, secondly present an alternative approach to identify ozone hole recovery unequivocally. Even though multi-variate regression methods help to reduce uncertainties in estimates of ozone recovery, great care has to be taken in their application due to the existence of uncertainties and degrees of freedom in the choice of independent variables. We show that taking all uncertainties into account in the regressions the formal recovery of ozone in the Antarctic ozone hole cannot be established yet, though is likely before the end of the decade (before 2020). Rather than focusing on time and area averages of total ozone columns or ozone profiles, we argue that the time evolution of the probability distribution of vertically resolved ozone in the Antarctic ozone hole contains a better fingerprint for the detection of ozone recovery in the Antarctic ozone hole. The advantages of this method over more tradition methods of trend analyses based on spatio-temporal average ozone are discussed. The 10-year record of MLS satellite measurements of ozone in the Antarctic ozone hole shows a

  4. The coffee diterpene cafestol increases plasma triacylglycerol by increasing the production rate of large VLDL apolipoprotein B in healthy normolipidemic subjects

    NARCIS (Netherlands)

    Roos, de B.; Caslake, M.J.; Stalenhoef, A.F.H.; Bedford, D.; Demacker, P.N.; Katan, M.B.; Packard, C.J.

    2001-01-01

    Background: Cafestol is a diterpene in unfiltered coffee that raises plasma triacylglycerol in humans. Objective: We studied whether cafestol increases plasma triacylglycerol by increasing the production rate or by decreasing the fractional catabolic rate of VLDL1 [Svedberg flotation unit (Sf)

  5. Inhibition of angiotensin-converting enzyme increases oestradiol production in ewes submitted to oestrous synchronization protocol.

    Science.gov (United States)

    Costa, A s; Junior, A S; Viana, G E N; Muratori, M C S; Reis, A M; Costa, A P R

    2014-10-01

    This study aimed at evaluating the effects of angiotensin-converting enzyme inhibitor (enalapril) and angiotensin II antagonist (valsartan) on the oestradiol and progesterone production in ewes submitted to oestrous synchronization protocol. The animals were weighed and randomly divided into three groups (n = 7). A pre-experiment conducted to verify the effectiveness and toxicity of enalapril (0.5 mg/kg LW) and valsartan (2.2 mg/kg LW) showed that, in the doses used, these drugs were effective in reducing blood pressure without producing toxic effects. In the experiment, all animals were subjected to oestrous synchronization protocol during 12 days. On D10, D11 and D12, animals received saline, enalapril or valsartan (same doses of the pre-experiment), according to the group randomly divided. The hormonal analysis showed an increase in oestradiol on the last day of the protocol (D12) in animals that received enalapril (p progesterone in any of the treatments. It is concluded that valsartan and enalapril are safe and effective subcutaneously for use in sheep and that the angiotensin-converting enzyme (ACE) inhibition with enalapril leads to an increase in oestradiol production near ovulation without changing the concentration of progesterone. This shows that ACE inhibition may be a useful tool in reproductive biotechnologies involving induction and synchronization of oestrus and ovulation in sheep. © 2014 Blackwell Verlag GmbH.

  6. Bioaugmentation as a solution to increase methane production from an ammonia-rich substrate.

    Science.gov (United States)

    Fotidis, Ioannis A; Wang, Han; Fiedel, Nicolai R; Luo, Gang; Karakashev, Dimitar B; Angelidaki, Irini

    2014-07-01

    Ammonia-rich substrates inhibit the anaerobic digestion (AD) process and constitute the main reason for low energy recovery in full-scale reactors. It is estimated that many full-scale AD reactors are operating in ammonia induced "inhibited steady-state" with significant losses of the potential biogas production yield. To date there are not any reliable methods to alleviate the ammonia toxicity effect or to efficiently digest ammonia-rich waste. In the current study, bioaugmentation as a possible method to alleviate ammonia toxicity effect in a mesophilic continuously stirred-tank reactor (CSTR) operating under "inhibited steady state" was tested. A fast growing hydrogenotrophic methanogen (i.e., Methanoculleus bourgensis MS2(T)) was bioaugmented in the CSTR reactor at high ammonia levels (5 g NH4(+)-N L(-1)). A second CSTR reactor was used as control with no bioaugmentation. The results derived from this study clearly demonstrated a 31.3% increase in methane production yield in the CSTR reactor, at steady-state, after bioaugmentation. Additionally, high-throughput 16S rRNA gene sequencing analysis showed a 5-fold increase in relative abundance of Methanoculleus spp. after bioaugmentation. On the contrary to all methods used today to alleviate ammonia toxicity effect, the tested bioaugmentation process performed without interrupting the continuous operation of the reactor and without replacing the ammonia-rich feedstock.

  7. The Productivity and Natural Increase of Swamp Buffalo in District Malang

    Science.gov (United States)

    Budiarto, A.; Ciptadi, G.

    2018-02-01

    The purpose of this research was to collect the basic information needed to develop a sustainable breeding program, which includes the potential for production and reproduction of buffaloes. This research was conducted on swamp buffalo in Malang Regency East Java. The research method used was survey method. Primary data was obtained from direct observation on 323 tails owned by 98 breeders. Variables observed were population growth and reproductive performance. The data obtained were analyzed descriptively. The result showed that the initial population study of swamp Buffaloes in Malang as many as 1155 with male and female ratio 1: 2. The ratios of male and female swamp Buffalo 20 percent male and 80 percent female. Overall, the buffalo reproduction performance was still low. Service per conception 2.06 ± 0.88; Anestrus Postpartum 7.46 ± 3.83 months; calving interval distance 17.82 ± 4.86 months; 20.43 % birth rate and 4.33% mortality rate of Natural Increase (NI) population was about 16,1%. In conclusion, the value of NI of swamp Buffalo in Malang Regency is still low. To increase buffalo productivity, buffalo breeding program is continuously based on reproduction control.

  8. Health Promotion and Healthier Products Increase Vending Purchases: A Randomized Factorial Trial.

    Science.gov (United States)

    Hua, Sophia V; Kimmel, Lisa; Van Emmenes, Michael; Taherian, Rafi; Remer, Geraldine; Millman, Adam; Ickovics, Jeannette R

    2017-07-01

    The current food environment has a high prevalence of nutrient-sparse foods and beverages, most starkly seen in vending machine offerings. There are currently few studies that explore different interventions that might lead to healthier vending machine purchases. To examine how healthier product availability, price reductions, and/or promotional signs affect sales and revenue of snack and beverage vending machines. A 2×2×2 factorial randomized controlled trial was conducted. Students, staff, and employees on a university campus. All co-located snack and beverage vending machines (n=56, 28 snack and 28 beverage) were randomized into one of eight conditions: availability of healthier products and/or 25% price reduction for healthier items and/or promotional signs on machines. Aggregate sales and revenue data for the 5-month study period (February to June 2015) were compared with data from the same months 1 year prior. Analyses were conducted July 2015. The change in units sold and revenue between February through June 2014 and 2015. Linear regression models (main effects and interaction effects) and t test analyses were performed. The interaction between healthier product guidelines and promotional signs in snack vending machines documented increased revenue (Prevenue change. Price reductions alone had no effect, nor were there any effects for the three-way interaction of the factors. Examining top-selling products for all vending machines combined, pre- to postintervention, we found an overall shift to healthier purchasing. When healthier vending snacks are available, promotional signs are also important to ensure consumers purchase those items in greater amounts. Mitigating potential loss in profits is essential for sustainability of a healthier food environment. Copyright © 2017 Academy of Nutrition and Dietetics. Published by Elsevier Inc. All rights reserved.

  9. Obtaining and application of increased food and biological value iodinated products from lentils sprouted grain

    Directory of Open Access Journals (Sweden)

    L. V. Antipova

    2017-01-01

    Full Text Available The choice of research direction is related to the actual problem of production and distribution of functional purpose food products due to the spread of nutritional diseases and the lack of micronutrients in ordinary people and athletes diet. As an object for enrichment with iodine, it was suggested to use lentils, which is famous for its high protein content, low lipid and oligosaccharide content, and low inhibitory effect. The iodine accumulation occurs during germination, due to the use of a nutrient solution of the iodine inorganic form. In addition, the biochemical composition of the grain and the biological value of lentils are significantly improved: an increase in the content of total amino acids and vitamins is found to be 1.5-2.0 times, a mass fraction of the oligosaccharide fraction is observed. To determine the effect of technological processing on the degree of iodine conservation in lentils the grains were exposed to the following impact: grinding, extrusion, frying. An insignificant decrease in the amount of iodine during extrusion was noted and more significant one - during grinding. The obtained results of the determination of biological safety by the method of studying the effect of the investigated product on the growth response of ciliates allowed to confirm the safety of both fresh and dried sprouted grain of lentils. When studying the microbiology of grain by sowing on agarized selective diagnostic environments with subsequent identification of the qualitative and quantitative composition of microflora, including colony-forming units, deviations from the normative indices were not revealed. Experimental production of the extrudate was carried out, possible ways of its use in meat systems for improving the functional and technological properties of minced meat, as well as for independent use as snacks for the nutrition of athletes were suggested.

  10. CEM: Increasing productivity through the management and monitoring of experiences provided to customers

    Directory of Open Access Journals (Sweden)

    Adriana Arineli

    2015-12-01

    Full Text Available Dealing with intangible and so subtle experience is unusual and a huge challenge for management that is not used to measure what has no numbers, but maybe they need to see beyond the obvious and accessible statistics. Recently, several studies point to the importance of customer experience management (CEM. However, if the CEM is a strategy to focus on operations and processes of a business around the customers’ experiences with the company, it is essential to seek grants to structure it and find out its effectiveness. This study examines the issues involved in offering superior customer experiences on fashion retail stores in Brazil, identifying the relation between productivity and CEM. Through a research with managers of three important Brazilian clothing retail chains, it was possible to analyze the aspects that impact on the customer experience and their relevance. A questionnaire was applied to evaluate 23 variables that make up the experience of the customer and their impact on increasing productivity. Some statistical techniques were used for data processing and it was possible to realize that only 4 of the 23 items were not relevant for customer experience. It can be concluded that CEM is effective in increasing productivity and can be used as a guideline matrix management in decision-making to promote superior customer experiences. Specific characteristics of each segment suggest different impacts in every aspect. Therefore, it is crucial that each segment review its own variables that will structure the CEM. Even assuming that it is defiant see beyond the obvious, maybe this is the necessary opportunity to create real competitive advantage and longevity for companies that want to stand out and be successful over time.

  11. Effect of acetyl salicylic acid on increased production of thromboxane after aortic graft surgery.

    Science.gov (United States)

    Lewin, J; Swedenborg, J; Egberg, N; Vesterqvist, O; Green, K

    1989-06-01

    Contact between blood and foreign surfaces, e.g. vascular grafts, causes activation and release of platelets. One consequence of platelet activation is production of thromboxane A2 (TxA2). The physiological effects of TxA2, i.e. platelet aggregation and vaso-constriction are counteracted by another prostanoid, prostacyclin (PGI2). Acetylsalicylic acid (ASA) causes a longlasting inhibition of platelet TxA2 production and a more shortlasting inhibition of PGI2 production. The present study examines TxA2 and PGI2 synthesis in patients receiving synthetic arterial grafts, some of which were treated with ASA. The prostanoid synthesis was evaluated by measurement of their main urinary metabolites with gas chromatography-mass spectrometry. Platelet release was evaluated by measurements of beta-thromboglobulin (beta-TG) and the plasma coagulation by measurements of fibrinopeptide A (FPA). These compounds were also measured in urine in order to avoid artifacts caused by activation of platelets and plasma coagulation during blood sampling. Following replacement of the abdominal aorta with a synthetic vascular graft there was a marked increase in the synthesis of TxA2 and PGI2. Increased levels of beta-TG and FPA were also demonstrated. Administration of ASA on the first and second postoperative days significantly reduced the synthesis of TxA2 but caused no significant effects on the other parameters measured. It is concluded that ASA may be beneficial in the postoperative period since it counteracts TxA2 with vasoconstricting and platelet aggregating properties but leaves PGI2 with vasodilating and antiaggregating properties relatively uneffected.

  12. Free ammonia pre-treatment of secondary sludge significantly increases anaerobic methane production.

    Science.gov (United States)

    Wei, Wei; Zhou, Xu; Wang, Dongbo; Sun, Jing; Wang, Qilin

    2017-07-01

    Energy recovery in the form of methane from sludge/wastewater is restricted by the poor and slow biodegradability of secondary sludge. An innovative pre-treatment technology using free ammonia (FA, i.e. NH 3 ) was proposed in this study to increase anaerobic methane production. The solubilisation of secondary sludge was significantly increased after FA pre-treatment at up to 680 mg NH 3 -N/L for 1 day, under which the solubilisation (i.e. 0.4 mg SCOD/mg VS; SCOD: soluble chemical oxygen demand; VS: volatile solids) was >10 times higher than that without FA pre-treatment (i.e. 0.03 mg SCOD/mg VS). Biochemical methane potential assays showed that FA pre-treatment at above 250 mg NH 3 -N/L is effective in improving anaerobic methane production. The highest improvement in biochemical methane potential (B 0 ) and hydrolysis rate (k) was achieved at FA concentrations of 420-680 mg NH 3 -N/L, and was determined as approximately 22% (from 160 to 195 L CH 4 /kg VS added) and 140% (from 0.22 to 0.53 d -1 ) compared to the secondary sludge without pre-treatment. More analysis revealed that the FA induced improvement in B 0 and k could be attributed to the rapidly biodegradable substances rather than the slowly biodegradable substances. Economic and environmental analyses showed that the FA-based technology is economically favourable and environmentally friendly. Since this FA technology aims to use the wastewater treatment plants (WWTPs) waste (i.e. anaerobic digestion liquor) to enhance methane production from the WWTPs, it will set an example for the paradigm shift of the WWTPs from 'linear economy' to 'circular economy'. Copyright © 2017 Elsevier Ltd. All rights reserved.

  13. Increased expression of pyruvate carboxylase and biotin protein ligase increases lysine production in a biotin prototrophic Corynebacterium glutamicum strain

    DEFF Research Database (Denmark)

    Wang, Zhihao; Moslehi-Jenabian, Soloomeh; Solem, Christian

    2015-01-01

    , and achieved biotin prototrophy. We found that AHP-3, containing pBIO, was able to produce lysine in a medium lacking biotin and that the lysine yield on glucose was similar to what is obtained when using a medium containing biotin. However, there was a decrease in specific growth rate of 20% when the strain...... pimeloyl-Acyl Carrier Protein [ACP]) formation. Pyruvate carboxylase (pycA), a biotin-dependent enzyme needed for lysine biosynthesis and biotin ligase (birA), which is responsible for attaching biotin to pyruvate carboxylase, were overexpressed by replacing the native promoters with the strong superoxide...... dismutase (sod) promoter, to see whether growth could be restored. Neither pycA nor birA overexpression, whether alone or in combination, had an effect on specific growth rate, but they did have a positive effect on lysine yield, which increased by 55% in the strain overexpressing both enzymes....

  14. THE IMPACT OF FERTILIZATION AND FOLIAR STIMULATION PRODUCTS BOTH ON INCREASING THE RESISTANCE TO MAJOR PHYTOPATHOGENS ATTACKS, AND ON INCREASING THE QUANTITY AND QUALITY OF WINE GRAPES HARVEST

    Directory of Open Access Journals (Sweden)

    Cristina BUNESCU

    2014-12-01

    Full Text Available The paper aimed to demonstrate the impact of fertilization and foliar stimulation products both on increasing the resistance to major phytopathogens attacks, and on increasing the quantity and quality of wine grapes harvest. Applying the foliar fertilizer products Plonvit Kali (c1, Tytanit (c2 and Optysil (c3 to vines, for a period of three years (2011/2013, in phenophases of intensive growth of shoots and grapes at approved dosages, simultaneously with pesticide treatment, not only a reduction of pathogenic fungi attack was obtained, but also and an increase of harvest without diminishing the quality of the grapes.

  15. Greater carbon stocks and faster turnover rates with increasing agricultural productivity

    Science.gov (United States)

    Sanderman, J.; Fallon, S.; Baisden, T. W.

    2013-12-01

    H.H. Janzen (2006) eloquently argued that from an agricultural perspective there is a tradeoff between storing carbon as soil organic matter (SOM) and the soil nutrient and energy benefit provided during SOM mineralization. Here we report on results from the Permanent Rotation Trial at the Waite Agricultural Institute, South Australia, indicating that shifting to an agricultural management strategy which returns more carbon to the soil, not only leads to greater carbon stocks but also increases the rate of carbon cycling through the soil. The Permanent Rotation Trial was established on a red Chromosol in 1925 with upgrades made to several treatments in 1948. Decadal soil samples were collected starting in 1963 at two depths, 0-10 and 10-22.5 cm, by compositing 20 soil cores taken along the length of each plot. We have chosen to analyze five trials representing a gradient in productivity: permanent pasture (Pa), wheat-pasture rotation (2W4Pa), continuous wheat (WW), wheat-oats-fallow rotation (WOF) and wheat-fallow (WF). For each of the soil samples (40 in total), the radiocarbon activity in the bulk soil as well as size-fractionated samples was measured by accelerator mass spectrometry at ANU's Radiocarbon Dating Laboratory (Fallon et al. 2010). After nearly 70 years under each rotation, SOC stocks increased linearly with productivity data across the trials from 24 to 58 tC ha-1. Importantly, these differences were due to greater losses over time in the low productivity trials rather than gains in SOC in any of the trials. Uptake of the bomb-spike in atmospheric 14C into the soil was greatest in the trials with the greatest productivity. The coarse size fraction always had greater Δ14C values than the bulk soil samples. Several different multi-pool steady state and non-steady state models were used to interpret the Δ14C data in terms of SOC turnover rates. Regardless of model choice, either the decay rates of all pools needed to increase or the allocation of C to

  16. High glucose alters retinal astrocytes phenotype through increased production of inflammatory cytokines and oxidative stress.

    Directory of Open Access Journals (Sweden)

    Eui Seok Shin

    Full Text Available Astrocytes are macroglial cells that have a crucial role in development of the retinal vasculature and maintenance of the blood-retina-barrier (BRB. Diabetes affects the physiology and function of retinal vascular cells including astrocytes (AC leading to breakdown of BRB. However, the detailed cellular mechanisms leading to retinal AC dysfunction under high glucose conditions remain unclear. Here we show that high glucose conditions did not induce the apoptosis of retinal AC, but instead increased their rate of DNA synthesis and adhesion to extracellular matrix proteins. These alterations were associated with changes in intracellular signaling pathways involved in cell survival, migration and proliferation. High glucose conditions also affected the expression of inflammatory cytokines in retinal AC, activated NF-κB, and prevented their network formation on Matrigel. In addition, we showed that the attenuation of retinal AC migration under high glucose conditions, and capillary morphogenesis of retinal endothelial cells on Matrigel, was mediated through increased oxidative stress. Antioxidant proteins including heme oxygenase-1 and peroxiredoxin-2 levels were also increased in retinal AC under high glucose conditions through nuclear localization of transcription factor nuclear factor-erythroid 2-related factor-2. Together our results demonstrated that high glucose conditions alter the function of retinal AC by increased production of inflammatory cytokines and oxidative stress with significant impact on their proliferation, adhesion, and migration.

  17. Increased Academic Productivity of Orthopaedic Surgery Residents Following 2011 Duty Hour Reform.

    Science.gov (United States)

    Johnson, Joey P; Savage, Kevin; Gil, Joseph A; Eberson, Craig P; Mulcahey, Mary K

    2017-12-19

    In 2003 and again in 2011, the Accreditation Council for Graduate Medical Education (ACGME) mandated increasingly stringent resident duty hour restrictions. With less time required at the hospital, residents theoretically have more time for other academic activities, such as research. Our study seeks to examine whether the number of research publications by orthopaedic residents increased following implementation of the 2011 ACGME duty hour restrictions. Pubmed was queried using publicly available alumni lists from programs across the United States. The years 2008 to 2011 were included to assess pre-2011 productivity. The years 2012 to 2015 were included in the post 2011 group. Paired t tests were used to assess differences between groups. Statistical significance was set to p care in any meaningful way. In our study, there was a statistically significant increase in publications after 2011; however, the number of publications between NIH funded and non-NIH funded programs did not differ. Our study is the first to demonstrate that with increasing duty hour restrictions, orthopaedic surgery residents may be using more of their free time to conduct research. Copyright © 2017 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

  18. The effect of Cu-rich sub-layer on the increased corrosion resistance of Cu-xZn alloys in chloride containing borate buffer

    International Nuclear Information System (INIS)

    Milosev, Ingrid; Mikic, Tadeja Kosec; Gaberscek, Miran

    2006-01-01

    The electrochemical behaviour of Cu-xZn alloys, as well as their constituent metals, in a borate buffer containing chloride ions in the molar range from 0.01 to 1 M are studied. Characteristics of these materials under anodic polarization are compared and the composition and morphology of the corrosion products formed in the course of polarization experiment are analysed by SEM and EDS. X-ray photoelectron spectroscopy and electrochemical impedance measurements are used for characterization of the surface layers formed on Cu, Zn and Cu-40Zn alloy during 2-h immersion at E oc in a borate buffer containing two different concentrations of chloride ions. New aspects of the behaviour of brass under E oc condition are revealed. The improved corrosion resistance of brass in chloride media, if compared to zinc metal, is attributed to a Cu-rich layer formed by the selective dissolution of zinc. Based on the results, a structural model describing the improved corrosion resistance of Cu-40Zn alloy with respect to Zn metal is proposed

  19. Control excess stock and calculating damaged products as the effort to increase revenue (case study of SME FBS)

    Science.gov (United States)

    Nurhasanah, N.; Mardhika, D. A.; Tanjung, W.; Gayatri, A. M.; Suri, Q. A.; Jingga; Safitri, R.; Supriyanto, A.

    2017-12-01

    Of small and medium scale (SME) is a business engaged in production. The growth product innovation of each year to year made competitiveness every SME very tight, and the sales must be high that avoid goods the product last year will be tough sold in the following year. Forecasting demand is needed so that no its production. In production process, besides products should also be considered about damaged products, resulting in a loss. In this study, researchers conducted a observations on SME FBS producing pants, shirts and shirts. SME FBS not having planning previous production, also in any period of production there always products be damaged. This study attempts to increase their SME FBS by controlling waste products, and those damaged products. According to the research conducted other products in some excess pants 1609 unit, and the shirts 187911 unit, and increase the income through control over the excess product obtained by 1% to the pants, and 52% to the shirts. For damaged product on period last year and future, increase 0.07% if the damaged on shirts can be sold, and 0.29% on pants if the broken sold.

  20. Using Four-Layer Sculpted Rib Cartilage Framework to Increase Transverse Height of the Reconstructive Ear in One Operative Stage for Microtia Patients.

    Science.gov (United States)

    Wan, Rui; Pang, Xingyuan; Ren, Jun

    2018-02-01

    This case study improves an operative method of ear reconstruction for microtia patients by using a four-layer rib cartilage framework to increase transverse height of the reconstructive ear to a natural level in one operative stage. The procedures of ear reconstruction were conducted from February 2014 to May 2016. The ear framework used in the procedures was fabricated from autologous rib cartilage into a four-layer spliced sculpture. Totally 23 patients with unilateral microtia were willing to be enrolled in this study. After the operation, 23 patients achieved 2.3-2.8 cm transverse height of reconstructed ears, which was basically the same as the normal side. Both patients and their families felt satisfied with the results. Follow-up was performed at 6-16 months after the procedures. Only one case showed significantly lowered transverse height of the reconstructed ear, compared to the normal one. It was due to the sleeping position of the patient (10-year-old boy), which put the reconstructed ear under pressure and reduced the transverse height of the ear. The method of four-layer sculpted autologous rib cartilage ear reconstruction has good clinical effect. It can provide a reconstructed ear that reaches normal transverse height and avoids a third operation to increase the transverse height by rib cartilage transplantation. This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

  1. Increasing innovation capability:of product-service systems through collaborative networks

    OpenAIRE

    Wallin, Johanna

    2011-01-01

    Many manufacturing industries are undergoing a transition from manufacturing of products towards integrating more services into the traditional product concepts and provide product-service systems (PSS). Development of PSS changes the focus from the product to the functionality of the product; hence it can be referred to as functional product development. PSS also puts focus on the value of the knowledge-intensive solution. This change in focus challenges the way companies innovate. When deve...

  2. Cereal Intake Increases and Dairy Products Decrease Risk of Cognitive Decline among Elderly Female Japanese.

    Science.gov (United States)

    Otsuka, R; Kato, Y; Nishita, Y; Tange, C; Nakamoto, M; Tomida, M; Imai, T; Ando, F; Shimokata, H

    2014-01-01

    If cognitive decline can be prevented through changes in daily diet with no medical intervention, it will be highly significant for dementia prevention. This longitudinal study examined the associations of different food intakes on cognitive decline among Japanese subjects. Prospective cohort study. The National Institute for Longevity Sciences - Longitudinal Study of Aging, a community-based study. Participants included 298 males and 272 females aged 60 to 81 years at baseline who participated in the follow-up study (third to seventh wave) at least one time. Cognitive function was assessed with the Mini-Mental State Examination (MMSE) in all study waves. Nutritional intake was assessed using a 3-day dietary record in the second wave. Cumulative data among participants with an MMSE >27 in the second wave were analyzed using a generalized estimating equation. Multivariate adjusted odds ratios (OR) and 95% confidence intervals (CI) for an MMSE score ≤27 in each study wave according to a 1 standard deviation (SD) increase of each food intake at baseline were estimated, after adjusting for age, follow-up time, MMSE score at baseline, education, body mass index, annual household income, current smoking status, energy intake, and history of diseases. In men, after adjusting for age, and follow-up period, MMSE score at baseline, the adjusted OR for a decline in MMSE score was 1.20 (95% CI, 1.02-1.42; p=0.032) with a 1-SD increase in cereal intake. After adjusting for education and other confounding variables, the OR for a decrease in MMSE score did not reach statistical significance for this variable. In women, multivariate adjusted OR for MMSE decline was 1.43 (95% CI, 1.15-1.77; p=0.001) with a 1-SD increase in cereal intake and 0.80 (95% CI, 0.65-0.98; p=0.034) with a 1-SD increase in milk and dairy product intake. This study indicates that a 1-SD (108 g/day) decrease in cereal intake and a 1-SD (128 g/day) increase in milk and dairy product intake may have an

  3. Usage of γ-ray treatment for productivity increasing of maize

    International Nuclear Information System (INIS)

    Ilieva, V.; Dimov, K.

    2003-01-01

    The aim of this study is to determine the influence of γ irradiation on phosphorus nutrition and maize productivity increasing. The vegetation experiment with irradiated and non-irradiated maize seeds in controlled conditions (moisture and temperature) for determination of phosphorus and phosphorus-gypsum absorption was carried out. The influence of γ irradiation on maize growth, export of mineral elements in maize, phosphorus fertilizing and dry biomass of maize plants are presented. The effect of the moisture of γ irradiated maize seeds (sort 'Knezha' - 3L - 621) on dry substance and yield of green mass is also discussed. Based on the presented experimental data the following conclusion have been made: the maize seeds (sort 'Knezha, hybrid H-708) simulation is useful; in all variants of phosphorus-gypsum absorption the increasing of plant mass yield (absolutely dry) is observed; the absorbed phosphates reserve is enhanced twice; the efficiency of 32 P use in stimulated seeds is higher than in non-stimulated seeds; the phosphorus content in maize (sort 'Knezha' - 2L - 611) is increasing mainly in leaves after X-ray irradiation (750 - 1500 R); γ irradiation (7.5 Gy) stimulate the root system (18%) and side roots development and drying up overcome

  4. Products of neutrophils and eosinophils increase the responsiveness of human isolated bronchial tissue.

    Science.gov (United States)

    Hallahan, A R; Armour, C L; Black, J L

    1990-05-01

    This study examines the possibility that products of neutrophils and eosinophils could increase the responsiveness of human isolated bronchial tissue. Neutrophils and eosinophils were isolated from the peripheral blood of healthy volunteers. The cells were incubated with 1 microM calcium ionophore A23187 for 10-15 min then centrifuged, the supernatant collected and stored at -70 degrees C. Human bronchial rings (2-3 mm diameter, 3-4 mm long) were prepared from specimens resected at thoracotomy. The tissues were suspended in organ baths under a 1 g load and changes in tension measured isometrically. Stable contractions to bolus doses of histamine (0.1-10 microM) or to electrical field stimulation (40-100 V, 4-16 Hz, 1 ms for 20 s) were established. Supernatant from 106 neutrophils or 105 eosinophils was then added and tissue responsiveness reassessed. Neutrophil supernatant increased tissue responsiveness to histamine and electrical field stimulation by 54 +/- 17% (n = 5, p less than 0.05) and 18 +/- 7% (n = 6, p less than 0.05), respectively. Eosinophil supernatant increased the histamine response by 60 +/- 23% (n = 8, p less than 0.05) while tissue responsiveness to electrical field stimulation was unchanged (n = 3). Thus, as neutrophils and eosinophils can change the responsiveness of human bronchus in vitro it is possible that they do this in vivo and may not simply be temporally related to the development of bronchial hyperresponsiveness.

  5. Circulating Glucagon 1-61 Regulates Blood Glucose by Increasing Insulin Secretion and Hepatic Glucose Production

    Directory of Open Access Journals (Sweden)

    Nicolai J. Wewer Albrechtsen

    2017-11-01

    Full Text Available Glucagon is secreted from pancreatic α cells, and hypersecretion (hyperglucagonemia contributes to diabetic hyperglycemia. Molecular heterogeneity in hyperglucagonemia is poorly investigated. By screening human plasma using high-resolution-proteomics, we identified several glucagon variants, among which proglucagon 1-61 (PG 1-61 appears to be the most abundant form. PG 1-61 is secreted in subjects with obesity, both before and after gastric bypass surgery, with protein and fat as the main drivers for secretion before surgery, but glucose after. Studies in hepatocytes and in β cells demonstrated that PG 1-61 dose-dependently increases levels of cAMP, through the glucagon receptor, and increases insulin secretion and protein levels of enzymes regulating glycogenolysis and gluconeogenesis. In rats, PG 1-61 increases blood glucose and plasma insulin and decreases plasma levels of amino acids in vivo. We conclude that glucagon variants, such as PG 1-61, may contribute to glucose regulation by stimulating hepatic glucose production and insulin secretion.

  6. Ancient Clam Gardens Increased Shellfish Production: Adaptive Strategies from the Past Can Inform Food Security Today

    Science.gov (United States)

    Groesbeck, Amy S.; Rowell, Kirsten; Lepofsky, Dana; Salomon, Anne K.

    2014-01-01

    Maintaining food production while sustaining productive ecosystems is among the central challenges of our time, yet, it has been for millennia. Ancient clam gardens, intertidal rock-walled terraces constructed by humans during the late Holocene, are thought to have improved the growing conditions for clams. We tested this hypothesis by comparing the beach slope, intertidal height, and biomass and density of bivalves at replicate clam garden and non-walled clam beaches in British Columbia, Canada. We also quantified the variation in growth and survival rates of littleneck clams (Leukoma staminea) we experimentally transplanted across these two beach types. We found that clam gardens had significantly shallower slopes than non-walled beaches and greater densities of L. staminea and Saxidomus giganteus, particularly at smaller size classes. Overall, clam gardens contained 4 times as many butter clams and over twice as many littleneck clams relative to non-walled beaches. As predicted, this relationship varied as a function of intertidal height, whereby clam density and biomass tended to be greater in clam gardens compared to non-walled beaches at relatively higher intertidal heights. Transplanted juvenile L. staminea grew 1.7 times faster and smaller size classes were more likely to survive in clam gardens than non-walled beaches, specifically at the top and bottom of beaches. Consequently, we provide strong evidence that ancient clam gardens likely increased clam productivity by altering the slope of soft-sediment beaches, expanding optimal intertidal clam habitat, thereby enhancing growing conditions for clams. These results reveal how ancient shellfish aquaculture practices may have supported food security strategies in the past and provide insight into tools for the conservation, management, and governance of intertidal seascapes today. PMID:24618748

  7. Benefits of supplementing an industrial waste anaerobic digester with energy crops for increased biogas production.

    Science.gov (United States)

    Nges, Ivo Achu; Escobar, Federico; Fu, Xinmei; Björnsson, Lovisa

    2012-01-01

    Currently, there is increasing competition for waste as feedstock for the growing number of biogas plants. This has led to fluctuation in feedstock supply and biogas plants being operated below maximum capacity. The feasibility of supplementing a protein/lipid-rich industrial waste (pig manure, slaughterhouse waste, food processing and poultry waste) mesophilic anaerobic digester with carbohydrate-rich energy crops (hemp, maize and triticale) was therefore studied in laboratory scale batch and continuous stirred tank reactors (CSTR) with a view to scale-up to a commercial biogas process. Co-digesting industrial waste and crops led to significant improvement in methane yield per ton of feedstock and carbon-to-nitrogen ratio as compared to digestion of the industrial waste alone. Biogas production from crops in combination with industrial waste also avoids the need for micronutrients normally required in crop digestion. The batch co-digestion methane yields were used to predict co-digestion methane yield in full scale operation. This was done based on the ratio of methane yields observed for laboratory batch and CSTR experiments compared to full scale CSTR digestion of industrial waste. The economy of crop-based biogas production is limited under Swedish conditions; therefore, adding crops to existing industrial waste digestion could be a viable alternative to ensure a constant/reliable supply of feedstock to the anaerobic digester. Copyright © 2011 Elsevier Ltd. All rights reserved.

  8. The intelligent clinical laboratory as a tool to increase cancer care management productivity.

    Science.gov (United States)

    Mohammadzadeh, Niloofar; Safdari, Reza

    2014-01-01

    Studies of the causes of cancer, early detection, prevention or treatment need accurate, comprehensive, and timely cancer data. The clinical laboratory provides important cancer information needed for physicians which influence clinical decisions regarding treatment, diagnosis and patient monitoring. Poor communication between health care providers and clinical laboratory personnel can lead to medical errors and wrong decisions in providing cancer care. Because of the key impact of laboratory information on cancer diagnosis and treatment the quality of the tests, lab reports, and appropriate lab management are very important. A laboratory information management system (LIMS) can have an important role in diagnosis, fast and effective access to cancer data, decrease redundancy and costs, and facilitate the integration and collection of data from different types of instruments and systems. In spite of significant advantages LIMS is limited by factors such as problems in adaption to new instruments that may change existing work processes. Applications of intelligent software simultaneously with existing information systems, in addition to remove these restrictions, have important benefits including adding additional non-laboratory-generated information to the reports, facilitating decision making, and improving quality and productivity of cancer care services. Laboratory systems must have flexibility to change and have the capability to develop and benefit from intelligent devices. Intelligent laboratory information management systems need to benefit from informatics tools and latest technologies like open sources. The aim of this commentary is to survey application, opportunities and necessity of intelligent clinical laboratory as a tool to increase cancer care management productivity.

  9. Rehabilitating acid soils for increasing crop productivity through low-cost liming material.

    Science.gov (United States)

    Bhat, Javid Ahmad; Kundu, Manik Chandra; Hazra, Gora Chand; Santra, Gour Hari; Mandal, Biswapati

    2010-09-15

    Productivity of red and lateritic soils is low because of their acidity and deficiencies in few essential nutrients viz., nitrogen, phosphorus, calcium, zinc, boron, molybdenum etc. We compared the effectiveness of basic slag, a low-cost liming material, with that of calcite as an ameliorant for these soils using mustard followed by rice as test crops. Experiments were conducted with three levels of each of basic slag and calcite along with a control on farmers' fields at 14 different locations. Influence of farmyard manure (FYM) and poultry manure (PM) on the effectiveness of the slag was also tested. On an average, basic slag performed better than calcite in increasing yields of both mustard and rice and left over higher amounts of available Ca, Si and Zn in residual soils. The slag also improved N, P, K and Ca nutrition of mustard and Si and Zn nutrition of rice with a favorable benefit:cost (B:C) ratio over the calcite (4.82 vs. 1.44). Effectiveness of the basic slag improved when it was applied in combination with FYM or PM (B:C, 5.83 and 6.27). Basic slag can, therefore, be advocated for use in the acidic red and lateritic soils for economically improving their productivity. Copyright 2010 Elsevier B.V. All rights reserved.

  10. Rehabilitating acid soils for increasing crop productivity through low-cost liming material

    International Nuclear Information System (INIS)

    Bhat, Javid Ahmad; Kundu, Manik Chandra; Hazra, Gora Chand; Santra, Gour Hari; Mandal, Biswapati

    2010-01-01

    Productivity of red and lateritic soils is low because of their acidity and deficiencies in few essential nutrients viz., nitrogen, phosphorus, calcium, zinc, boron, molybdenum etc. We compared the effectiveness of basic slag, a low-cost liming material, with that of calcite as an ameliorant for these soils using mustard followed by rice as test crops. Experiments were conducted with three levels of each of basic slag and calcite along with a control on farmers' fields at 14 different locations. Influence of farmyard manure (FYM) and poultry manure (PM) on the effectiveness of the slag was also tested. On an average, basic slag performed better than calcite in increasing yields of both mustard and rice and left over higher amounts of available Ca, Si and Zn in residual soils. The slag also improved N, P, K and Ca nutrition of mustard and Si and Zn nutrition of rice with a favorable benefit:cost (B:C) ratio over the calcite (4.82 vs. 1.44). Effectiveness of the basic slag improved when it was applied in combination with FYM or PM (B:C, 5.83 and 6.27). Basic slag can, therefore, be advocated for use in the acidic red and lateritic soils for economically improving their productivity.

  11. Rehabilitating acid soils for increasing crop productivity through low-cost liming material

    Energy Technology Data Exchange (ETDEWEB)

    Bhat, Javid Ahmad [Directorate of Research, Bidhan Chandra Krishi Viswavidyalaya, Kalyani - 741 235, West Bengal (India); Kundu, Manik Chandra, E-mail: mckundu@rediffmail.com [Directorate of Research, Bidhan Chandra Krishi Viswavidyalaya, Kalyani - 741 235, West Bengal (India); Hazra, Gora Chand [Directorate of Research, Bidhan Chandra Krishi Viswavidyalaya, Kalyani - 741 235, West Bengal (India); Santra, Gour Hari [Department of Soil Science and Agril. Chemistry, Orissa University of Agriculture and Technology, Bhubaneswar - 751003, Orissa (India); Mandal, Biswapati [Directorate of Research, Bidhan Chandra Krishi Viswavidyalaya, Kalyani - 741 235, West Bengal (India)

    2010-09-15

    Productivity of red and lateritic soils is low because of their acidity and deficiencies in few essential nutrients viz., nitrogen, phosphorus, calcium, zinc, boron, molybdenum etc. We compared the effectiveness of basic slag, a low-cost liming material, with that of calcite as an ameliorant for these soils using mustard followed by rice as test crops. Experiments were conducted with three levels of each of basic slag and calcite along with a control on farmers' fields at 14 different locations. Influence of farmyard manure (FYM) and poultry manure (PM) on the effectiveness of the slag was also tested. On an average, basic slag performed better than calcite in increasing yields of both mustard and rice and left over higher amounts of available Ca, Si and Zn in residual soils. The slag also improved N, P, K and Ca nutrition of mustard and Si and Zn nutrition of rice with a favorable benefit:cost (B:C) ratio over the calcite (4.82 vs. 1.44). Effectiveness of the basic slag improved when it was applied in combination with FYM or PM (B:C, 5.83 and 6.27). Basic slag can, therefore, be advocated for use in the acidic red and lateritic soils for economically improving their productivity.

  12. Space Station Freedom automation and robotics: An assessment of the potential for increased productivity

    Science.gov (United States)

    Weeks, David J.; Zimmerman, Wayne F.; Swietek, Gregory E.; Reid, David H.; Hoffman, Ronald B.; Stammerjohn, Lambert W., Jr.; Stoney, William; Ghovanlou, Ali H.

    1990-01-01

    This report presents the results of a study performed in support of the Space Station Freedom Advanced Development Program, under the sponsorship of the Space Station Engineering (Code MT), Office of Space Flight. The study consisted of the collection, compilation, and analysis of lessons learned, crew time requirements, and other factors influencing the application of advanced automation and robotics, with emphasis on potential improvements in productivity. The lessons learned data collected were based primarily on Skylab, Spacelab, and other Space Shuttle experiences, consisting principally of interviews with current and former crew members and other NASA personnel with relevant experience. The objectives of this report are to present a summary of this data and its analysis, and to present conclusions regarding promising areas for the application of advanced automation and robotics technology to the Space Station Freedom and the potential benefits in terms of increased productivity. In this study, primary emphasis was placed on advanced automation technology because of its fairly extensive utilization within private industry including the aerospace sector. In contrast, other than the Remote Manipulator System (RMS), there has been relatively limited experience with advanced robotics technology applicable to the Space Station. This report should be used as a guide and is not intended to be used as a substitute for official Astronaut Office crew positions on specific issues.

  13. Potential To Increase Productivity And Sustainability In Argentinean Agriculture With Controlled Traffic Farming: A Short Discussion

    Directory of Open Access Journals (Sweden)

    Antille Diogenes L.

    2015-09-01

    Full Text Available Drivers for and potential barriers against adoption of controlled traffic farming (CTF systems in Argentina are reviewed. Traffic compaction is one of the main factors affecting crop productivity within Argentinean agriculture, and has significant although less quantified impacts on the whole-of-farm system. This suggests that the benefits of no-tillage (NT, which represents the dominant form of cropping in Argentina, are not fully realised. Conservative estimates indicate that crop yields could be improved by at least 15% if NT is used in conjunction with CTF. Cost-benefit analyses of available options for compaction management are required. Despite this, and based on reported evidence internationally, a shift toward increased uptake of CTF within Argentinean agriculture is likely to: (1 improve productivity and farm profitability, (2 enhance environmental performance, and (3 maintain competitiveness of the agricultural sector. Appropriate technical advice and support is a key requirement to drive adoption of CTF. Therefore, the adoption process will benefit from collaboration developed with well-established research and extension organisations in Australia and the United Kingdom, and active engagement of machinery manufacturers.

  14. Increased serum level of prolactin is related to autoantibody production in systemic lupus erythematosus.

    Science.gov (United States)

    Yang, J; Li, Q; Yang, X; Li, M

    2016-04-01

    Prolactin (PRL) is known to aid effector B cells and augment autoimmunity, but the role of PRL in systemic lupus erythematosus (SLE) is not fully elucidated. The aim of this study was to determine the correlation between the serum levels of PRL and autoantibody production in SLE. Blood levels of PRL, anti-double-stranded DNA (ds-DNA) antibody, immunoglobulin M (IgM) and immunoglobulin G (IgG) were determined in samples from 30 adult patients with SLE and 25 healthy controls. The relationships between the serum level of PRL and SLE disease activity, as well as the titres of the ds-DNA antibody, IgM and IgG were determined. The serum level of PRL was higher in the SLE patients than in the healthy controls. PRL concentration increased during SLE flares-ups and decreased following disease remission. There was a positive correlation between the PRL concentration and serum levels of IgM, IgG and ds-DNA antibody titre. These data suggest that the serum level of PRL was closely related to the antibody production and disease activity of SLE patients. PRL concentration was dramatically reduced upon the remission of disease activity, indicating that PRL levels might be a promising predictor of SLE disease severity. © The Author(s) 2015.

  15. NVENTIONS IN THE NANOTECHNOLOGICAL AREA PROVIDE INCREASED RESISTANCE OF CONSTRUCTION MATERIALS AND PRODUCTS TO OPERATIONAL LOAD

    Directory of Open Access Journals (Sweden)

    VLASOV Vladimir Alexeevich

    2013-12-01

    Full Text Available The invention «Dispersion of Carbon Nanotubes (RU 2494961» can be used in production of modifying additives for construction materials. Dispersion of carbon nanotubes contains, mass %: carbon nanotubes 1–20; surface active agent – sodium chloride of sulfonated derived naphthalene 1–20; fumed silica 5–15; water – the rest. Dispersion can additionally contain ethylene glycol as antifreeze. Dispersion is steady in storage, it is soluble in water, provides increased strength of construction materials. Invention «Building Structures Reinforcement Composition (RU 2493337» can beused in construction to reinforce concrete, brick and masonry structures. Composition contains glass or basalt roving taken in quantity 90÷100 parts by weight, soaked in polymer binder based on epoxy taken in quantity 0,001÷1,5 parts by weight. This invention provides high resistance to operational load.

  16. A Protein Disulfide Isomerase Gene Fusion Expression System That Increases the Extracellular Productivity of Bacillus brevis

    Science.gov (United States)

    Kajino, Tsutomu; Ohto, Chikara; Muramatsu, Masayoshi; Obata, Shusei; Udaka, Shigezo; Yamada, Yukio; Takahashi, Haruo

    2000-01-01

    We have developed a versatile Bacillus brevis expression and secretion system based on the use of fungal protein disulfide isomerase (PDI) as a gene fusion partner. Fusion with PDI increased the extracellular production of heterologous proteins (light chain of immunoglobulin G, 8-fold; geranylgeranyl pyrophosphate synthase, 12-fold). Linkage to PDI prevented the aggregation of the secreted proteins, resulting in high-level accumulation of fusion proteins in soluble and biologically active forms. We also show that the disulfide isomerase activity of PDI in a fusion protein is responsible for the suppression of the aggregation of the protein with intradisulfide, whereas aggregation of the protein without intradisulfide was prevented even when the protein was fused to a mutant PDI whose two active sites were disrupted, suggesting that another PDI function, such as chaperone-like activity, synergistically prevented the aggregation of heterologous proteins in the PDI fusion expression system. PMID:10653729

  17. Hydrogen-oxygen steam generator applications for increasing the efficiency, maneuverability and reliability of power production

    Science.gov (United States)

    Schastlivtsev, A. I.; Borzenko, V. I.

    2017-11-01

    The comparative feasibility study of the ener