Wood products used in constructing conservation and development projects by the Corps of Engineers in the United States, 1962 and 1978

Science.gov (United States)

W. H. Reid; D. B. McKeever

Estimates of the amounts of wood products used in constructing civil conservation and development projects by the Corps of Engineers in the United States are presented for the years 1962 and 1978. Amounts of lumber, laminated lumber, poles and piling, and plywood used in construction are stratified by five construction categories, and three types of uses. Estimates of...

Tree-Fruit Production. An Instructional Unit for Teachers of Adult Vocational Education in Agriculture.

Science.gov (United States)

O'Bryan, Robert C.; Iverson, Maynard J.

Designed as a guide for teachers in planning and conducting young and adult farmer classes, the unit covers the basic areas of tree-fruit production. The format of the 10-lesson unit allows for the utilization of the problem-solving and discussion methods of teaching. The major objective of the unit is to develop the ability to effectively…

On Tour... Primary Hardwood Processing, Products and Recycling Unit

Science.gov (United States)

Philip A. Araman; Daniel L. Schmoldt

1995-01-01

Housed within the Department of Wood Science and Forest Products at Virginia Polytechnic Institute is a three-person USDA Forest Service research work unit (with one vacancy) devoted to hardwood processing and recycling research. Phil Araman is the project leader of this truly unique and productive unit, titled ãPrimary Hardwood Processing, Products and Recycling.ä The...

Increasing loyalty to breastfeeding: investigating a product development strategy.

Science.gov (United States)

Parkinson, Joy; Russell-Bennett, Rebekah; Previte, Josephine

2012-01-01

This article demonstrates how social marketing insights were used to influence women's loyalty to breastfeeding. The article reports on a social marketing campaign undertaken by the Australian Breastfeeding Association and a government health department, which used a product development strategy in order to increase breastfeeding loyalty. Seeking new approaches to support breastfeeding behaviors is critical and timely, because while initiation rates of breastfeeding are high in developed countries such as the United Kingdom, Australia, Canada, and the United States, duration rates are significantly lower. Results indicate that a product- focused strategy influences pregnant women's loyalty to exclusively breastfeeding.

Development of Protection and Control Unit for Distribution Substation

Science.gov (United States)

Iguchi, Fumiaki; Hayashi, Hideyuki; Takeuchi, Motohiro; Kido, Mitsuyasu; Kobayashi, Takashi; Yanaoka, Atsushi

The Recently, electronics and IT technologies have been rapidly innovated and have been introduced to power system protection & control system to achieve high reliability, maintainability and more functionality. Concerning the distribution substation application, digital relays have been applied for more than 10 years. Because of a number of electronic devices used for it, product cost becomes higher. Also, products installed during the past high-growth period will be at the end of lifetime and will be replaced. Therefore, replacing market is expected to grow and the reduction of cost is demanded. Considering above mentioned background, second generation digital protection and control unit as a successor is designed to have following concepts. Functional integration based on advanced digital technologies, Ethernet LAN based indoor communication network, cost reduction and downsizing. Pondering above concepts, integration of protection and control function is adopted in contrary to the functional segregation applied to the previous system in order to achieve one-unit concept. Also the adoption of Ethernet LAN for inter-unit communication is objective. This report shows the development of second-generation digital relay for distribution substation, which is equipped with control function and Ethernet LAN by reducing the size of auxiliary transformer unit and the same size as previous product is realized.

Product quality of parenteral vancomycin products in the United States.

Science.gov (United States)

Nambiar, S; Madurawe, R D; Zuk, S M; Khan, S R; Ellison, C D; Faustino, P J; Mans, D J; Trehy, M L; Hadwiger, M E; Boyne, M T; Biswas, K; Cox, E M

2012-06-01

In response to concerns raised about the quality of parenteral vancomycin products, the U.S. Food and Drug Administration (FDA) is investigating the product quality of all FDA-approved parenteral vancomycin products available in the United States. Product quality was evaluated independently at two FDA Office of Testing and Research (FDA-OTR) sites. In the next phase of the investigation, being done in collaboration with the National Institute of Allergy and Infectious Diseases, the in vivo activity of these products will be evaluated in an appropriate animal model. This paper summarizes results of the FDA investigation completed thus far. One site used a validated ultrahigh-pressure liquid chromatography method (OTR-UPLC), and the second site used the high-performance liquid chromatography (HPLC) method for related substances provided in the British Pharmacopeia (BP) monograph for vancomycin intravenous infusion. Similar results were obtained by the two FDA-OTR laboratories using two different analytical methods. The products tested had 90 to 95% vancomycin B (active component of vancomycin) by the BP-HPLC method and 89 to 94% vancomycin by OTR-UPLC methods. Total impurities were 5 to 10% by BP-HPLC and 6 to 11% by OTR-UPLC methods. No single impurity was >2.0%, and the CDP-1 level was ≤ 2.0% across all products. Some variability in impurity profiles of the various products was observed. No adverse product quality issues were identified with the six U.S. vancomycin parenteral products. The quality parameters of all parenteral vancomycin products tested surpassed the United States Pharmacopeia acceptance criteria. Additional testing will characterize in vivo performance characteristics of these products.

High-resolution Monthly Satellite Precipitation Product over the Conterminous United States

Science.gov (United States)

Hashemi, H.; Fayne, J.; Knight, R. J.; Lakshmi, V.

2017-12-01

We present a data set that enhanced the Tropical Rainfall Measuring Mission (TRMM) Multi-satellite Precipitation Analysis (TMPA) monthly product 3B43 in its accuracy and spatial resolution. For this, we developed a correction function to improve the accuracy of TRMM 3B43, spatial resolution of 25 km, by estimating and removing the bias in the satellite data using a ground-based precipitation data set. We observed a strong relationship between the bias and land surface elevation; TRMM 3B43 tends to underestimate the ground-based product at elevations above 1500 m above mean sea level (m.amsl) over the conterminous United States. A relationship was developed between satellite bias and elevation. We then resampled TRMM 3B43 to the Digital Elevation Model (DEM) data set at a spatial resolution of 30 arc second ( 1 km on the ground). The produced high-resolution satellite-based data set was corrected using the developed correction function based on the bias-elevation relationship. Assuming that each rain gauge represents an area of 1 km2, we verified our product against 9,200 rain gauges across the conterminous United States. The new product was compared with the gauges, which have 50, 60, 70, 80, 90, and 100% temporal coverage within the TRMM period of 1998 to 2015. Comparisons between the high-resolution corrected satellite-based data and gauges showed an excellent agreement. The new product captured more detail in the changes in precipitation over the mountainous region than the original TRMM 3B43.

The use of the United States FDA programs as a strategy to advance the development of drug products for neglected tropical diseases.

Science.gov (United States)

Sachs-Barrable, Kristina; Conway, Jocelyn; Gershkovich, Pavel; Ibrahim, Fady; Wasan, Kishor M

2014-11-01

Neglected tropical diseases (NTDs) are infections which are endemic in poor populations in lower- and middle-income countries (LMIC). Approximately one billion people have now or are at risk of getting an NTD and yet less than 5% of research dollars are focused on providing treatments and prevention of these highly debilitating and deadly conditions. The United States Food and Drug Administration (FDA) Orphan Drug Designation program (ODDP) provides orphan status to drugs and biologics, defined as those intended for the safe and effective treatment, diagnosis or prevention of rare diseases and/or disorders that affect fewer than 200 000 people in the United States, or that affect more than 200 000 persons but are not expected to recover the costs of developing and marketing a treatment drug. These regulations have led to the translation of rare disease knowledge into innovative rare disease therapies. The FDA Guidance for Industry on developing drugs for the treatment and prevention of NTDs describes the following regulatory strategies: Orphan Product Designation, Fast Track Designation, Priority Review Designation, Accelerated Approval and Tropical Disease Priority Review Voucher. This paper will discuss how these regulations and especially the ODDP can improve the clinical development and accessibility of drug products for NTDs.

The development of environmental productivity

DEFF Research Database (Denmark)

Henningsen, Geraldine; Henningsen, Arne; Schröder, Sascha T.

the environmental productivity of individual generator units based on a panel data set for the period 1998 to 2011 that includes virtually all fuel-fired generator units in Denmark. We further decompose total productivity into technical efficiency, best practice ratio, and scale efficiency and use a global...... Malmquist index to calculate the yearly changes. By applying time series clustering, we can identify high, middle, and low performance groups of generator units in a dynamic setting. Our results indicate that the sectoral productivity only slightly increased over the fourteen years. Furthermore, we find...... that there is no overall high achiever group, but that the ranking, although time consistent, varies between the different productivity measures. However, we identify steam turbines and combustion engines for combined heat and power production as potential high performers, while combustion engines that only produce...

Comparative study of the variables for determining unit processing cost of irradiated food products in developing countries : case study of Ghana

International Nuclear Information System (INIS)

Banini, G.K; Emi-Reynolds, G.; Kassapu, S.N.

1997-01-01

A method for estimating unit cost of gamma treated food products in a developing country like Ghana is presented. The method employs the cost of cobalt source requirement, capital and operating costs, dose requirements etc. and relates these variables to various annual throughput at a gamma processing facility. In situations where the cost of foreign components or devices are required, the assumptions have been based on those of Kunstadt and Steeves. Otherwise, the prevailing conditions existing in Ghana have been used. The study reveals that the unit processing cost for gamma treatment foods in such a facility is between 8.0 to 147.2 US dollars per tonne. (author). 9 refs., 4 figs

Pharmaceutical product development: A quality by design approach

Science.gov (United States)

Pramod, Kannissery; Tahir, M. Abu; Charoo, Naseem A.; Ansari, Shahid H.; Ali, Javed

2016-01-01

The application of quality by design (QbD) in pharmaceutical product development is now a thrust area for the regulatory authorities and the pharmaceutical industry. International Conference on Harmonization and United States Food and Drug Administration (USFDA) emphasized the principles and applications of QbD in pharmaceutical development in their guidance for the industry. QbD attributes are addressed in question-based review, developed by USFDA for chemistry, manufacturing, and controls section of abbreviated new drug applications. QbD principles, when implemented, lead to a successful product development, subsequent prompt regulatory approval, reduce exhaustive validation burden, and significantly reduce post-approval changes. The key elements of QbD viz., target product quality profile, critical quality attributes, risk assessments, design space, control strategy, product lifecycle management, and continual improvement are discussed to understand the performance of dosage forms within design space. Design of experiments, risk assessment tools, and process analytical technology are also discussed for their role in QbD. This review underlines the importance of QbD in inculcating science-based approach in pharmaceutical product development. PMID:27606256

Pharmaceutical product development: A quality by design approach.

Science.gov (United States)

Pramod, Kannissery; Tahir, M Abu; Charoo, Naseem A; Ansari, Shahid H; Ali, Javed

2016-01-01

The application of quality by design (QbD) in pharmaceutical product development is now a thrust area for the regulatory authorities and the pharmaceutical industry. International Conference on Harmonization and United States Food and Drug Administration (USFDA) emphasized the principles and applications of QbD in pharmaceutical development in their guidance for the industry. QbD attributes are addressed in question-based review, developed by USFDA for chemistry, manufacturing, and controls section of abbreviated new drug applications. QbD principles, when implemented, lead to a successful product development, subsequent prompt regulatory approval, reduce exhaustive validation burden, and significantly reduce post-approval changes. The key elements of QbD viz., target product quality profile, critical quality attributes, risk assessments, design space, control strategy, product lifecycle management, and continual improvement are discussed to understand the performance of dosage forms within design space. Design of experiments, risk assessment tools, and process analytical technology are also discussed for their role in QbD. This review underlines the importance of QbD in inculcating science-based approach in pharmaceutical product development.

Disaggregating reserve-to-production ratios: An algorithm for United States oil and gas reserve development

Science.gov (United States)

Williams, Charles William

Reserve-to-production ratios for oil and gas development are utilized by oil and gas producing states to monitor oil and gas reserve and production dynamics. These ratios are used to determine production levels for the manipulation of oil and gas prices while maintaining adequate reserves for future development. These aggregate reserve-to-production ratios do not provide information concerning development cost and the best time necessary to develop newly discovered reserves. Oil and gas reserves are a semi-finished inventory because development of the reserves must take place in order to implement production. These reserves are considered semi-finished in that they are not counted unless it is economically profitable to produce them. The development of these reserves is encouraged by profit maximization economic variables which must consider the legal, political, and geological aspects of a project. This development is comprised of a myriad of incremental operational decisions, each of which influences profit maximization. The primary purpose of this study was to provide a model for characterizing a single product multi-period inventory/production optimization problem from an unconstrained quantity of raw material which was produced and stored as inventory reserve. This optimization was determined by evaluating dynamic changes in new additions to reserves and the subsequent depletion of these reserves with the maximization of production. A secondary purpose was to determine an equation for exponential depletion of proved reserves which presented a more comprehensive representation of reserve-to-production ratio values than an inadequate and frequently used aggregate historical method. The final purpose of this study was to determine the most accurate delay time for a proved reserve to achieve maximum production. This calculated time provided a measure of the discounted cost and calculation of net present value for developing new reserves. This study concluded that

75 FR 13345 - Pricing for Certain United States Mint Products

Science.gov (United States)

2010-03-19

... DEPARTMENT OF THE TREASURY United States Mint Pricing for Certain United States Mint Products AGENCY: United States Mint, Department of the Treasury. ACTION: Notice. SUMMARY: The United States Mint is announcing the price of First Spouse Bronze Medals and 2010 First Spouse Bronze Medal Series: Four...

Nanotherapeutics--product development along the "nanomaterial" discussion.

Science.gov (United States)

Wacker, Matthias G

2014-03-01

Nanomaterials have become part of formulation development in the pharmaceutical industry and offer exciting opportunities in the area of targeted drug delivery. But they may also exert unexpected toxicities and potentially pose a threat to human health and the environment. Since the Scientific Committee on Emerging and Newly Identified Health Risks recommended a definition of "nanomaterials" for implementation into the existing and upcoming regulatory framework in the European Union, a discussion about safety requirements of new nanoscale products has emerged. At the same time, the Food and Drug Administration of the United States still observes recent developments in this area. Although the impact on the pharmaceutical product chain is still uncertain, guidelines on risk assessment in food products and cosmetics are available and offer a preview of future developments in the regimens of pharmaceuticals. © 2014 Wiley Periodicals, Inc. and the American Pharmacists Association.

A more rational approach to new-product development.

Science.gov (United States)

Bonabeau, Eric; Bodick, Neil; Armstrong, Robert W

2008-03-01

Companies often treat new-product development as a monolithic process, but it can be more rationally divided into two parts: an early stage that focuses on evaluating prospects and eliminating bad bets, and a late stage that maximizes the remaining candidates' market potential. Recognizing the value of this approach, Eli Lilly designed and piloted Chorus, an autonomous unit dedicated solely to the early stage. This article demonstrates how segmenting development in this way can speed it up and make it more cost-effective. Two classes of decision-making errors can impede NPD, the authors say. First, managers often ignore evidence challenging their assumptions that projects will succeed. As a result, many projects go forward despite multiple red flags; some even reach the market, only to fail dramatically after their introduction. Second, companies sometimes terminate projects prematurely because people fail to conduct the right experiments to reveal products' potential. Most companies promote both kinds of errors by focusing disproportionately on late-stage development; they lack the early, truth-seeking functions that would head such errors off. In segmented NPD, however, the early-stage organization maintains loyalty to the experiment rather than the product, whereas the late-stage organization pursues commercial success. Chorus has significantly improved NPD efficiency and productivity at Lilly. Although the unit absorbs just one-tenth of Lilly's investment in early-stage development, it delivers a substantially greater fraction of the molecules slated for late Phase II trials--at almost twice the speed and less than a third of the cost of the standard process, sometimes shaving as much as two years off the usual development time.

Socioeconomic Development Inequalities among Geographic Units ...

African Journals Online (AJOL)

Socio-economic development inequality among geographic units is a phenomenon common in both the developed and developing countries. Regional inequality may result in dissension among geographic units of the same state due to the imbalance in socio-economic development. This study examines the inequality ...

Designing Production Based Learning as a Basic Strategy for Creating Income Generating Units at Universitas Pendidikan Indonesia

Science.gov (United States)

Suryadi, D.; Supriatna, N.

2018-02-01

The establishment of Universitas Pendidikan Indonesia (later to be referred as UPI) Statute as a State-Owned State University (PTN-BH) has implications for UPI requirements. One of them is the need for UPI to generate an Income Generating Unit (IGU) of at least IDR 100 Billion (one hundred billion rupiah). This requirement is considered difficult since UPI is one of the universities whose focus is on the world of education and not the business and industry. Surely this becomes the thinking of the entire academic community to make a breakthrough by optimizing their potential. This study aims to find the pattern of learning practice that produces economic value products as one indicator of IGU value achievement as an effort to support UPI as PTN-BH. Learning strategy is done by designing and implementing the production base learning (PBL) approach as the basis strategy for the development of production units capable of becoming IGU in UPI. The research method used refers to research and development methods with adjustments taking into account the effectiveness in validating and conducting field model trials. The result of this research is the basic design of PBL model as the development strategy of production unit in the achievement of IGU UPI PTN-BH.

The Proximate Unit in Chinese Handwritten Character Production

Directory of Open Access Journals (Sweden)

Jenn-Yeu eChen

2013-08-01

Full Text Available In spoken word production, a proximate unit is the first phonological unit at the sublexical level that is selectable for production (O’Seaghdha, Chen, & Chen, 2010. The present study investigated whether the proximate unit in Chinese handwritten word production is the stroke, the radical, or something in between. A written version of the form preparation task was adopted. Chinese participants learned sets of two-character words, later were cued with the first character of each word, and had to write down the second character (the target. Response times were measured from the onset of a cue character to the onset of a written response. In Experiment 1, the target characters within a block shared (homogeneous or did not share (heterogeneous the first stroke. In Experiment 2, the first two strokes were shared in the homogeneous blocks. Response times in the homogeneous blocks and in the heterogeneous blocks were comparable in both experiments (Exp. 1: 687 ms vs. 684 ms, Exp. 2: 717 vs. 716. In Experiment 3 and 4, the target characters within a block shared or did not share the first radical. Response times in the homogeneous blocks were significantly faster than those in the heterogeneous blocks (Exp. 3: 685 vs. 704, Exp. 4: 594 vs. 650. In Experiment 5 and 6, the shared component was a Gestalt-like form that is more than a stroke, constitutes a portion of the target character, can be a stand-alone character itself, can be a radical of another character but is not a radical of the target character (e.g., 士in聲, 鼓, 穀, 款; called a logographeme. Response times in the homogeneous blocks were significantly faster than those in the heterogeneous blocks (Exp. 5: 576 vs. 625, Exp. 6: 586 vs. 620. These results suggest a model of Chinese handwritten character production in which the stroke is not a functional unit, the radical plays the role of a morpheme, and the logographeme is the proximate unit.

75 FR 13345 - Pricing for Certain 2010 United States Mint Products

Science.gov (United States)

2010-03-19

... DEPARTMENT OF THE TREASURY United States Mint Pricing for Certain 2010 United States Mint Products AGENCY: United States Mint, Department of the Treasury. ACTION: Notice. SUMMARY: The United States Mint is announcing the price of the 2010 United States Mint Presidential $1 Coin and First Spouse Medal...

The development of automatic chemical processing system for 67Ga production

International Nuclear Information System (INIS)

Lee, Dong Hoon; Suh, Yong Sup; Yang, Seung Dae; Chun, Kwon Soo; Hur, Min Goo; Yun, Yong Ki; Kim, Yoon Jong; Hong, Seung Hong

2003-01-01

The automatic system for 67 Ga production using for the diagnosis of malignant tumor has been developed. A solvent extraction and an ion exchange chromatography were used for the separation 67 Ga from the irradiated enriched 68 Zn. This system consisted of a solvent separation unit which was composed of micro conductivity cells, air supply tubes, solvent transfer tubes, solenoid valves and glasses, a PLC based controller and a PMU user interface unit for automation. The radiation exposure to the workers and the production time can both be reduced by employing this system during the 67 Ga production phase. After all, the mass production of 67 Ga with high efficiency was possible

Forest products research and development organizations in a worldwide setting: A review of structure, governance, and measures of performance of organizations outside the United States

Science.gov (United States)

Paul V. Ellefson; Michael A. Kilgore; Kenneth E. Skog; Christopher D. Risbrudt

2007-01-01

Located in 23 countries, 40 forest-products research and development organizations outside the United States were reviewed in 2004 and 2005. The intent was to obtain a better understanding of how such organizations are structured and administered and their performance judged. Investing over $600 million annually, the 40 organizations employed 7,000 to 7,500 scientists...

Development of diagnostic mammography unit

Energy Technology Data Exchange (ETDEWEB)

Matsubara, M.; Muraki, T.; Kitade, K. (Toshiba Corp., Kawasaki, Kanagawa (Japan))

1981-07-01

The mortality from breast cancer is gradually increasing year after year. Accordingly, it is eagerly desired that X-ray diagnosis information be obtainable with higher accuracy and ease for early detection of the disease. Meeting this demand, development has been made of a 2 x magnification mammography unit (Model MGU-01) capabel of minutely depicting microcalcifications with a size of 150 ..mu..m or thereabout and the peripheral condition of a mammary abscess. The background of the development, the substance of the unit and the examination made of the unit are described here.

Development of diagnostic mammography unit

International Nuclear Information System (INIS)

Matsubara, Mitsuyoshi; Muraki, Takeshi; Kitade, Kooichi

1981-01-01

The mortality from breast cancer is gradually increasing year after year. Accordingly, it is eagerly desired that X-ray diagnosis information be obtainable with higher accuracy and ease for early detection of the disease. Meeting this demand, development has been made of a 2 x magnification mammography unit (Model MGU-01) capabel of minutely depicting microcalcifications with a size of 150 μm or thereabout and the peripheral condition of a mammary abscess. The background of the development, the substance of the unit and the examination made of the unit are described here. (author)

Functional unit and product functionality—addressing increase in consumption and demand for functionality in sustainability assessment with LCA

DEFF Research Database (Denmark)

Kim, Seung Jin; Kara, Sami; Hauschild, Michael Zwicky

2016-01-01

behaviour and demonstrates the vicious circle of improving product efficiency that leads to further consumption and environmental impact. To address this problem, a new framework of dynamic functional unit definition is put forward for performing comparative LCA to manage the development of product life...... consumption of products in provided services as well as in growing volumes. This article aims to present a new framework in defining a dynamic functional unit of product technologies that caters for changes in consumer behaviour and growing market. Methods: A new approach to defining the functional unit...... is demonstrated on a case study in which the analysis of historical data for two TV product technologies—CRT and LCD—is used to show how the total environmental impact is increasing due to the increased functionality which triggers an increase in the volume of the market. Despite the efforts of improving product...

Senior management support in the new product development process

NARCIS (Netherlands)

Gomes, J.F.; Gomes, Jorge; de Weerd-Nederhof, Petronella C.; Pearson, Alan; Fisscher, O.A.M.

2001-01-01

This paper studies the relationship between senior management support to new product development activities by means of a quantitative and qualitative analysis of questionnaire and interview data collected in the United Kingdom and the Netherlands. The quantitative analysis showed that there is a

China-United States Productivity Catch-Up

DEFF Research Database (Denmark)

Deng, Paul Duo; Jefferson, Gary H.

China’s gap in industrial labor productivity with the United States has been steadily shrinking over recent decades. In this paper we examine the main sources of gap reduction and the potential for further catch-up. Using Chinese above-scale firm-level data during 1998-2007 period and BEA industry...... -level data in the US, we first document the respective rates of growth of labor productivity, gap reduction, and contributions to overall catch-up of China’s manufacturing sector during 1998-2007. We then aggregate the firm-level data to the 3-digit industry level to estimate a productivity gap...... reduction function and find that the key drivers for the productivity convergence are the initial technology gap, increased R&D spending, firm’s ownership restructuring, and industry level entry-exit ratio, a measure of competitive dynamism. A key finding is that the catch-up dynamic entails the break out...

Scale up risk of developing oil shale processing units

International Nuclear Information System (INIS)

Oepik, I.

1991-01-01

The experiences in oil shale processing in three large countries, China, the U.S.A. and the U.S.S.R. have demonstrated, that the relative scale up risk of developing oil shale processing units is related to the scale up factor. On the background of large programmes for developing the oil shale industry branch, i.e. the $30 billion investments in colorado and Utah or 50 million t/year oil shale processing in Estonia and Leningrad Region planned in the late seventies, the absolute scope of the scale up risk of developing single retorting plants, seems to be justified. But under the conditions of low crude oil prices, when the large-scale development of oil shale processing industry is stopped, the absolute scope of the scale up risk is to be divided between a small number of units. Therefore, it is reasonable to build the new commercial oil shale processing plants with a minimum scale up risk. For example, in Estonia a new oil shale processing plant with gas combustion retorts projected to start in the early nineties will be equipped with four units of 1500 t/day enriched oil shale throughput each, designed with scale up factor M=1.5 and with a minimum scale up risk, only r=2.5-4.5%. The oil shale retorting unit for the PAMA plant in Israel [1] is planned to develop in three steps, also with minimum scale up risk: feasibility studies in Colorado with Israel's shale at Paraho 250 t/day retort and other tests, demonstration retort of 700 t/day and M=2.8 in Israel, and commercial retorts in the early nineties with the capacity of about 1000 t/day with M=1.4. The scale up risk of the PAMA project r=2-4% is approximately the same as that in Estonia. the knowledge of the scope of the scale up risk of developing oil shale processing retorts assists on the calculation of production costs in erecting new units. (author). 9 refs., 2 tabs

Development of interface technology for nuclear hydrogen production system

International Nuclear Information System (INIS)

Lee, Ki Young; Park, J. K.; Chang, J. H.

2012-06-01

These works focus on the development of attainment indices for nuclear hydrogen key technologies, the analysis of the hydrogen production process and the performance estimation for hydrogen production systems, and the assessment of the nuclear hydrogen production economy. The codes for analyzing the hydrogen production economy are developed for calculating the unit production cost of nuclear hydrogen. We developed basic R and D quality management methodology to meet design technology of VHTR's needs. By putting it in practice, we derived some problems and solutions. We distributed R and D QAP and Q and D QAM to each teams and these are in operation. Computer simulations are performed for estimating the thermal efficiency for the electrodialysis component likely to adapting as one of the hydrogen production system in Korea and EED-SI process known as the key components of the hydrogen production systems. Using the commercial codes, the process diagrams and the spread-sheets were produced for the Bunsen reaction process, Sulphuric Acid dissolution process and HI dissolution process, respectively, which are the key components composing of the SI process

A functional intranet for the United States Coast Guard Unit

OpenAIRE

Hannah, Robert Todd.

1998-01-01

Approved for public release; distribution in unlimited. This thesis describes the complete development process of a friendly functional Intranet for an operational United States Coast Guard (USCG) electronic Support Unit (ESU) in Alameda, California. The final product is suitable for immediate use. It may also be used as a prototype for future Intranet development efforts. The methodology used to develop a finished, working product provides the core subject matter for this thesis. The disc...

Product- and Process Units in the CRITT Translation Process Research Database

DEFF Research Database (Denmark)

Carl, Michael

than 300 hours of text production. The database provides the raw logging data, as well as Tables of pre-processed product- and processing units. The TPR-DB includes various types of simple and composed product and process units that are intended to support the analysis and modelling of human text......The first version of the "Translation Process Research Database" (TPR DB v1.0) was released In August 2012, containing logging data of more than 400 translation and text production sessions. The current version of the TPR DB, (v1.4), contains data from more than 940 sessions, which represents more...

Innovation in Product Development

DEFF Research Database (Denmark)

McAloone, Tim C.; Restrepo-Giraldo, John Dairo

2005-01-01

The course on Innovation in Product Development attempts to identify and understand the nature of innovation and product development and their important factors. The course takes both a theoretical and a practical approach and employs a mix of lectures, project work and group discussion. Format...... insight. Course content The following aspects of innovation in product development are considered: - Humans and products - Needs and products - Product life - Teams creating products - Products creating business - Product development models - Organising product development - Product development tools...... - The future of product development....

Thermodynamic and economic analysis of integrating lignocellulosic bioethanol production in a Danish combined heat and power unit

DEFF Research Database (Denmark)

Lythcke-Jørgensen, Christoffer Ernst; Haglind, Fredrik; Clausen, Lasse Røngaard

bioethanol production in the Danish CHP unit Avedøreværket 1. Numerical models of the plants were developed, and feasible integration solutions were identified and optimised using exergy analysis. Hour-wise production simulations were run over a reference year, and market prices and economic parameters from...

Developing Collaborative Product Development Capabilities

DEFF Research Database (Denmark)

Mahnke, Volker; Tran, Yen

2012-01-01

innovation strategies’. Our analyses suggest that developing such collaboration capabilities benefits from the search for complementary practices, the combination of learning styles, and the development of weak and strong ties. Results also underscore the crucial importance of co-evolution of multi......Collaborative product development capabilities support a company’s product innovation activities. In the context of the fast fashion sector, this paper examines the development of the product development capabilities (PDC) that align product development capabilities in a dual innovation context......, one, slow paced, where the firm is well established and the other, fast paced, which represents a new competitive arena in which the company competes. To understand the process associated with collaborative capability development, we studied three Scandinavian fashion companies pursuing ‘dual...

Tobacco Product Use Among Adults - United States, 2015.

Science.gov (United States)

Phillips, Elyse; Wang, Teresa W; Husten, Corinne G; Corey, Catherine G; Apelberg, Benjamin J; Jamal, Ahmed; Homa, David M; King, Brian A

2017-11-10

Tobacco use remains the leading cause of preventable disease and death in the United States (1). Despite declining cigarette smoking prevalence among U.S. adults, shifts in the tobacco product landscape have occurred in recent years (2,3). Previous estimates of tobacco product use among U.S. adults were obtained from the National Adult Tobacco Survey, which ended after the 2013-2014 cycle. This year, CDC and the Food and Drug Administration (FDA) assessed the most recent national estimates of tobacco product use among adults aged ≥18 years using, for the first time, data from the 2015 National Health Interview Survey (NHIS), an annual, nationally representative, in-person survey of the noninstitutionalized U.S. civilian population. The 2015 NHIS adult core questionnaire included 33,672 adults aged ≥18 years, reflecting a 55.2% response rate. Data were weighted to adjust for differences in selection probability and nonresponse, and to provide nationally representative estimates. In 2015, 20.1 % of U.S. adults currently (every day or some days) used any tobacco product, 17.6% used any combustible tobacco product, and 3.9% used ≥2 tobacco products. By product, 15.1% of adults used cigarettes; 3.5% used electronic cigarettes (e-cigarettes); 3.4% used cigars, cigarillos, or filtered little cigars; 2.3% used smokeless tobacco; and 1.2% used regular pipes, water pipes, or hookahs.* Current use of any tobacco product was higher among males; persons aged product was 47.2% among adults with serious psychological distress compared with 19.2% among those without serious psychological distress. Proven population-level interventions that focus on the diversity of tobacco product use are important to reducing tobacco-related disease and death in the United States (1).

Food production - Present and future development

International Nuclear Information System (INIS)

Lamm, C.G.

1974-01-01

This year the joint FAO/IAEA Division of Atomic Energy in Food and Agriculture celebrates its 10th anniversary. The aim of these two United Nations organizations is to ensure that the technical services of both FAO and IAEA are fully co-ordinated and their programmes are designed to assist developing Member States to apply isotopes and radiation techniques to the solution of food and agricultural problems. More precisely, the medium-term objectives of the Joint Division are to exploit the potential of nuclear techniques in research and development for increasing and stabilizing agricultural production, improving food quality, protecting agricultural products from spoilage and losses and minimizing pollution of food and the agricultural environment. This account of what radioisotopes can do for man in the agricultural field is therefore to a great extent a review of the activities of the Joint Division and a prediction of its future fields of emphasis, especially in the light of the present long-range and world-wide food crisis. (author)

Sales of Nicotine-Containing Electronic Cigarette Products: United States, 2015.

Science.gov (United States)

Marynak, Kristy L; Gammon, Doris G; Rogers, Todd; Coats, Ellen M; Singh, Tushar; King, Brian A

2017-05-01

To assess the proportion of electronic cigarette (e-cigarette) products sold in the United States that contain nicotine according to retail scanner data. We obtained unit sales data from January 11, 2015, to December 12, 2015, from The Nielsen Company for convenience stores; supermarkets; mass merchandisers; drug, club, and dollar stores; and Department of Defense commissaries. The data did not include purchases from tobacco specialty shops, "vape shops," or online sources. Nicotine content was assessed by product type (disposables, rechargeables, and refills), region, and flavor status based on nicotine strength listed in the Universal Product Codes. For the 36.7% of entries lacking nicotine content information, we conducted Internet searches by brand, product, and flavor. In 2015, 99.0% of e-cigarette products sold contained nicotine, including 99.0% of disposables, 99.7% of rechargeables, and 98.8% of refills. Overall, 98.7% of flavored e-cigarette products and 99.4% of nonflavored e-cigarette products contained nicotine. In 2015, almost all e-cigarette products sold in US convenience stores and other assessed channels contained nicotine. Public Health Implications. Findings reinforce the importance of warning labels for nicotine-containing products, ingredient reporting, and restrictions on sales to minors.

Development of student's skills of 3D modeling of assembly units

Science.gov (United States)

Chepur, P. V.; Boshhenko, T. V.

2018-03-01

The paper presents data on the influence of additives of the pre-treated aluminium oxide powder on the structure of cast lead-tin-based bronzes. The article demonstrates that modern, advanced from the point of view of automation, methods in designing products are the basis for the successful implementation of any production task. The advantages of product presentation in the form of an assembly consisting of 3D models of its details are described. The extreme importance of high-quality preparation of students of engineering specialties for work in computer-aided design programs such as AutoCAD, Compass 3D, Inventer|, Solid Edge, Solid Works, Revit, ANSYS is considered. It is established that one of the most effective forms of increasing the level of computer graphic preparation of students are academic competitions and contests on modeling and prototyping products. The stages of creation of assembly unit models in the AutoCad and Compass 3D software suits generally accepted both in design in a business environment and during training of specialists are considered. The developed 3D models of assembly units are presented in the course of preparation for academic competitions (called Academic Olympics in Russia) of students of the 2nd-5th years of study and the first year students of the master's program in engineering. The conclusions and recommendations on the development of the direction of three-dimensional design in the environment of higher education are given.

Global product development

DEFF Research Database (Denmark)

Hansen, Zaza Nadja Lee; Ahmed-Kristensen, Saeema

2011-01-01

Globalisation has enabled companies to globalise their product development process. Today, everything from manufacturing to R&D can be globally distributed. This has led to a more complex and disintegrated product development process. This paper investigates the impacts companies have experienced...... operational solutions to counteract the negative impacts with varying degrees of success. This paper presents a unique look into global product development through an investigation of its impact on the organisation, the product development process, and the product. Furthermore, it shows the solutions...... as a result of this, and how they have been addressed. Data was collected through case studies of five Danish multinational corporations. The findings showed that the companies experienced several challenges when they globalised their product development process. They consequently implemented various...

Unit labour costs, productivity and international competitiveness

NARCIS (Netherlands)

Ark, Bart van; Stuivenwold, Edwin; Ypma, Gerard

2005-01-01

This paper provides international comparisons of relative levels of unit labour costs (ULC) for several OECD countries relative to the United States. The estimates are based on the Total Economy Database and the 60-Industry Database of the Groningen Growth and Development Centre (GGDC), and are also

Initial closed operation of the CELSS Test Facility Engineering Development Unit

Science.gov (United States)

Kliss, M.; Blackwell, C.; Zografos, A.; Drews, M.; MacElroy, R.; McKenna, R.; Heyenga, A. G.

2003-01-01

As part of the NASA Advanced Life Support Flight Program, a Controlled Ecological Life Support System (CELSS) Test Facility Engineering Development Unit has been constructed and is undergoing initial operational testing at NASA Ames Research Center. The Engineering Development Unit (EDU) is a tightly closed, stringently controlled, ground-based testbed which provides a broad range of environmental conditions under which a variety of CELSS higher plant crops can be grown. Although the EDU was developed primarily to provide near-term engineering data and a realistic determination of the subsystem and system requirements necessary for the fabrication of a comparable flight unit, the EDU has also provided a means to evaluate plant crop productivity and physiology under controlled conditions. This paper describes the initial closed operational testing of the EDU, with emphasis on the hardware performance capabilities. Measured performance data during a 28-day closed operation period are compared with the specified functional requirements, and an example of inferring crop growth parameters from the test data is presented. Plans for future science and technology testing are also discussed. Published by Elsevier Science Ltd on behalf of COSPAR.

Situation and development trend of nuclear power and uranium industry in the united states and Russia

International Nuclear Information System (INIS)

Tan Chenglong

2005-01-01

This paper introduces the situation, trend of nuclear electrical and uranium industry in the United States and Russia. The United States and Russia are the two biggest countries in the world which generated nuclear power earliest. After 40 years' development, nuclear power in the United States and Russia are approximately 20%, 11% respectively of the total generation capacity in 2001. In the United States, only 6% of the nuclear power consumed uranium resource is domestic, in Russia about half of its uranium production is for export. Due to the collision between the energy development and environment protection, nuclear power in USA is still strong, but the uranium industry declines. In the future, uranium production for nuclear power in the United States will depend on the international market and the uranium storage of different levels. On the basis of pacifying people and making the country prosper, Russia has established their great plans for nuclear power with their substantial uranium resources. The author considers the supply and demand of uranium industry will remain balanced in the future decade on the whole, despite the United States and Russia's trend of uranium industry could take a major effect on uranium industry to the world. (authors)

Organisation Development through Management Development: The United Biscuits Example.

Science.gov (United States)

Campbell, Andrew; Winterburn, Den

1988-01-01

The success of the strategic management program developed by United Biscuits (United Kingdom) for senior managers resulted from (1) tailoring the program to organizational and individual needs; (2) using company-specific material; (3) involving top management; and (4) using a follow-up program. (JOW)

Development of a Hydronic Rooftop Unit-HyPak-MA

Energy Technology Data Exchange (ETDEWEB)

Lee, Eric; Berman, Mark

2009-11-14

The majority of U.S. commercial floor space is cooled by rooftop HVAC units (RTUs). RTU popularity derives chiefly from their low initial cost and relative ease of service access without disturbing building occupants. Unfortunately, current RTUs are inherently inefficient due to a combination of characteristics that unnecessarily increase cooling loads and energy use. 36% percent of annual U.S. energy, and two-thirds of electricity, is consumed in and by buildings. Commercial buildings consume approximately 4.2 quads of energy each year at a cost of $230 billion per year, with HVAC equipment consuming 1.2 quads of electricity. More than half of all U.S. commercial floor space is cooled by packaged HVAC units, most of which are rooftop units (RTUs). Inefficient RTUs create an estimated 3.5% of U.S. CO{sub 2} emissions, thus contributing significantly to global warming5. Also, RTUs often fail to maintain adequate ventilation air and air filtration, reducing indoor air quality. This is the second HyPak project to be supported by DOE through NETL. The prior project, referred to as HyPak-1 in this report, had two rounds of prototype fabrication and testing as well as computer modeling and market research. The HyPak-1 prototypes demonstrated the high performance capabilities of the HyPak concept, but made it clear that further development was required to reduce heat exchanger cost and improve system reliability before HyPak commercialization can commence. The HyPak-1 prototypes were limited to about 25% ventilation air fraction, limiting performance and marketability. The current project is intended to develop a 'mixed-air' product that is capable of full 0-100% modulation in ventilation air fraction, hence it was referred to as HyPak-MA in the proposal. (For simplicity, the -MA has been dropped when referencing the current project.) The objective of the HyPak Project is to design, develop and test a hydronic RTU that provides a quantum improvement over

Federal Support for the Development, Production, and Use of Fuels and Energy Technologies

Science.gov (United States)

2015-11-01

the amount of oil produced in the United States has increased dramatically because of technological developments related to hydraulic fractur- ing...the development of hydrau- lic fracturing (or fracking ) and other modern drilling technologies has made some oil production much more responsive to

Nuclear development in the United States

International Nuclear Information System (INIS)

Brewer, S.

1983-01-01

The history of the nuclear development in the United States has been one of international cooperation relations so far. The United States is to offer the technical information on atomic energy utilization to foreign countries in exchange for the guarantee that they never attempt to have or develop nuclear weapons. Actually, the United States has supplied the technologies on nuclear fuel cycle and other related fields to enable other countries to achieve economical and social progress. The Department of Energy clarified the public promise of the United States regarding the idea of international energy community. The ratio of nuclear power generation to total electric power supply in the United States exceeded 12%, and will exceed 20% by 1990. Since 1978, new nuclear power station has not been ordered, and some of the contracted power stations were canceled. The atomic energy industry in the United States prospered at the beginning of 1970s, but lost the spirit now, mainly due to the institutional problems rather than the technical ones. As the policy of the government to eliminate the obstacles, the improvement of the procedure for the permission and approval, the establishment of waste disposal capability, the verification of fast breeder reactor technology and the promotion of commercial fuel reprocessing were proposed. The re-establishment of the United States as the reliable supplier of atomic energy service is the final aim. (Kako, I.)

DEVELOPMENT OF CONTINUOUS SOLVENT EXTRACTION PROCESSES FOR COAL DERIVED CARBON PRODUCTS

Energy Technology Data Exchange (ETDEWEB)

Elliot Kennel; Chong Chen; Dady Dadyburjor; Mark Heavner; Manoj Katakdaunde; Liviu Magean; James Mayberry; Alfred Stiller; Joseph Stoffa; Christopher Yurchick; John Zondlo

2009-12-31

This NETL sponsored effort seeks to develop continuous technologies for the production of carbon products, which may be thought of as the heavier products currently produced from refining of crude petroleum and coal tars obtained from metallurgical grade coke ovens. This effort took binder grade pitch, produced from liquefaction of West Virginia bituminous grade coal, all the way to commercial demonstration in a state of the art arc furnace. Other products, such as crude oil, anode grade coke and metallurgical grade coke were demonstrated successfully at the bench scale. The technology developed herein diverged from the previous state of the art in direct liquefaction (also referred to as the Bergius process), in two major respects. First, direct liquefaction was accomplished with less than a percent of hydrogen per unit mass of product, or about 3 pound per barrel or less. By contrast, other variants of the Bergius process require the use of 15 pounds or more of hydrogen per barrel, resulting in an inherent materials cost. Second, the conventional Bergius process requires high pressure, in the range of 1500 psig to 3000 psig. The WVU process variant has been carried out at pressures below 400 psig, a significant difference. Thanks mainly to DOE sponsorship, the WVU process has been licensed to a Canadian Company, Quantex Energy Inc, with a commercial demonstration unit plant scheduled to be erected in 2011.

An analysis of tropical hardwood product importation and consumption in the United States

Science.gov (United States)

Paul M. Smith; Michael P. Haas; William G. Luppold; William G. Luppold

1995-01-01

The consumption of forest products emanating from tropical rainforests is an issue that is receiving increasing attention in the United States. This attention stems from concerns over the sustainability of tropical ecosystems. However, trade statistics show the United States imported only 4.0 percent of all tropical timber products traded globally in 1989. In addition...

Investigation reactor D-2201 polypropylene production unit using nuclear technique

International Nuclear Information System (INIS)

Wibisono; Sugiharto; Jefri Simanjuntak

2016-01-01

D-2201 reactor is a unit in the polypropylene production process at Pertamina Refinery Unit III Plaju. Reactor with a capacity of 45 kilo liter is not operated in normal operation condition. The validity of liquid level indicator on the unit is doubtful when refers to the production quality. Gamma source of 150 mCi Cobalt-60 and a scintillation detector had been used to scan the outer wall of the reactor to detect the liquid level during operation with a capacity of 40 %. Measurements were made along the reactor walls with 25 mm scan resolution and 5 seconds time sampling. Experiment result shows that the liquid level at the position of 40 % and at normal level position are not observed. Investigation did not find the liquid level above normal. D-2201 is diagnose not normal operating condition diagnosed with liquid abundant passed the recommended limits. Investigation advised to repair or to calibrate the liquid level indicator which is currently installed. (author)

Chapter 2. The production units

International Nuclear Information System (INIS)

1998-01-01

In the second chapter of this CD ROM the production units of the Slovak Electric, Plc. (Slovenske elektrarne, a.s.), are presented. It consist of next paragraphs: (1) Nuclear power plants (A-1 Nuclear Power Plant (History, Technological scheme, basic data are presented); V-1, V-2 Bohunice Nuclear Power Plant (History 1972-1985, technological scheme; nuclear safety, radiation protection, heat supply, international co-operation and basic data are presented); Mochovce Nuclear Power Plant (History 1980-1998, technological scheme, construction completion, milestones of commissioning, safety and environmental protection as well as basic data are included). (2) Conventional sources of energy (Vojany fossil power plant (History 1959-1992, Technological units of power plant, Impact of operation on the environment, Plant of Vojany FPP Renewal and Reconstruction, Basic data are listed), Novaky fossil power plant (History 1949-1998, Technological scheme, current investment construction, basic data, Handlova heating plant). Kosice Combined Heat Power Plant (History 1960-1995, technological scheme, State metrology centre, acredited chemical laboratory, basic data). (3) Hydroelectric power plants (Trencin HPPs: Cierny Vah pumped storage HPP, Liptovska Mara HPP, Orava HPP, Sucany HPP, Miksova HPP, Nosice HPP, Velke Kozmalovce HPP, Gabcikovo HPP, Dubnica HPP, Nove Mesto n/V HPP, Madunice HPP, Kralova HPP) and Dobsina HPPs: (Dobsina HPP, Ruzin HPP, Domasa HPP, small HPPs) are presented

The Perceived Impact of the Agile Development and Project Management Method Scrum on Information Systems and Software Development Productivity

DEFF Research Database (Denmark)

Kautz, Karlheinz; Johansen, Thomas Heide; Uldahl, Andreas

2013-01-01

This research contributes to the body of knowledge in information systems development (ISD) with an empirical investigation in form of a case study that demonstrates the positive impact of the agile development and project management method Scrum on information systems and software development...... productivity and it provides a useful operationalization of the concept through seven identified indicators for productivity. Despite the fact that the case unit had challenges with the use of Scrum, the indicators identified the areas where the company had managed to exploit the potential of Scrum and its...... practices with regard to increasing productivity. The research results are discussed both with regard to the existing Scrum literature as well as to complex adaptive systems (CAS) as a foundation for ISD and agile development....

Systemic approach in rural administration: Study of the family production unit

Directory of Open Access Journals (Sweden)

Adilson R. Paz Stamberg

2015-06-01

Full Text Available This paper focuses on understanding the rationality of production management and available resources in agricultural production unit (UPA, identifying its main technical and socioeconomic characteristics in order to make a diagnosis to subsidize the rural manager in decision making.This study was part of the extension project approved in the Institutional Incentive Extension Program of the Farroupilha Federal Institute (Brazil, prioritizing as object of study a family UPA in the municipality of Santo Antônio das Missões/RS/Brazil, being conducted between October-November 2014.As methodological procedure a survey was done with qualitative and quantitative data, such as natural resources, utilized agricultural area, herd, plant, machinery and equipment, availability of labor force and yields of the various cultivation subsystems, breeding and processing. This data was organized in a spreadsheet, which identifies the adopted production system and its main technical and socioeconomic characteristics. As proposed, technical and managerial intervention in the production system, proposed strategically to enhance milk production opposed to the soybean production, considering its high contribution in relation to the value added per unit area.Key Words: Rural Administration - Production management - Systemic approach.

Evaluation of syngas production unit cost of bio-gasification facility using regression analysis techniques

Energy Technology Data Exchange (ETDEWEB)

Deng, Yangyang; Parajuli, Prem B.

2011-08-10

Evaluation of economic feasibility of a bio-gasification facility needs understanding of its unit cost under different production capacities. The objective of this study was to evaluate the unit cost of syngas production at capacities from 60 through 1800Nm 3/h using an economic model with three regression analysis techniques (simple regression, reciprocal regression, and log-log regression). The preliminary result of this study showed that reciprocal regression analysis technique had the best fit curve between per unit cost and production capacity, with sum of error squares (SES) lower than 0.001 and coefficient of determination of (R 2) 0.996. The regression analysis techniques determined the minimum unit cost of syngas production for micro-scale bio-gasification facilities of $0.052/Nm 3, under the capacity of 2,880 Nm 3/h. The results of this study suggest that to reduce cost, facilities should run at a high production capacity. In addition, the contribution of this technique could be the new categorical criterion to evaluate micro-scale bio-gasification facility from the perspective of economic analysis.

Factors Affecting Productivity in the United States Naval Construction Force

National Research Council Canada - National Science Library

Morton, Darren

1997-01-01

By using a craftsman questionnaire, this thesis identifies and ranks the most important factors impairing Petty Officer productivity and morale in the United States Naval Construction Force (Seabees...

Benchmarking in pathology: development of a benchmarking complexity unit and associated key performance indicators.

Science.gov (United States)

Neil, Amanda; Pfeffer, Sally; Burnett, Leslie

2013-01-01

This paper details the development of a new type of pathology laboratory productivity unit, the benchmarking complexity unit (BCU). The BCU provides a comparative index of laboratory efficiency, regardless of test mix. It also enables estimation of a measure of how much complex pathology a laboratory performs, and the identification of peer organisations for the purposes of comparison and benchmarking. The BCU is based on the theory that wage rates reflect productivity at the margin. A weighting factor for the ratio of medical to technical staff time was dynamically calculated based on actual participant site data. Given this weighting, a complexity value for each test, at each site, was calculated. The median complexity value (number of BCUs) for that test across all participating sites was taken as its complexity value for the Benchmarking in Pathology Program. The BCU allowed implementation of an unbiased comparison unit and test listing that was found to be a robust indicator of the relative complexity for each test. Employing the BCU data, a number of Key Performance Indicators (KPIs) were developed, including three that address comparative organisational complexity, analytical depth and performance efficiency, respectively. Peer groups were also established using the BCU combined with simple organisational and environmental metrics. The BCU has enabled productivity statistics to be compared between organisations. The BCU corrects for differences in test mix and workload complexity of different organisations and also allows for objective stratification into peer groups.

9 CFR 381.209 - Returned United States inspected and marked poultry products; exemption.

Science.gov (United States)

2010-01-01

... PRODUCTS INSPECTION AND VOLUNTARY INSPECTION AND CERTIFICATION POULTRY PRODUCTS INSPECTION REGULATIONS... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Returned United States inspected and marked poultry products; exemption. 381.209 Section 381.209 Animals and Animal Products FOOD SAFETY AND...

Sustainability of egg production in the United States--the policy and market context.

Science.gov (United States)

Mench, J A; Sumner, D A; Rosen-Molina, J T

2011-01-01

The US egg industry is being pressured from many directions to change its production practices, particularly to address concerns about hen welfare in conventional cage systems. Responding to similar pressures, in 1999, the European Union banned conventional laying cages starting in 2012. This now impending European ban has led to the development of several alternative housing systems. These include noncage systems like aviaries and modified (enriched or furnished) cages that include perches, areas in which the hens can forage and dustbathe, and nests. Understanding the European experience is valuable as the United States considers the future direction of the egg industry. In the United States, the proportion of eggs produced in alternative systems is small (less than 5% of output) but growing, in part due to market and political incentives for systems that provide hens with more behavioral freedom than conventional cages. Animal welfare, however, is only one element of a sustainable production system. Other elements include those related to public values, the environment, economics, worker health, and food safety and quality. Eggs are a primary source of animal protein globally, and the United States is the third largest producer of eggs in the world, behind China and the European Union. The national table egg flock comprises about 280 million hens housed in all regions but with approximately 60% of eggs produced in the 10 leading states. Adopting new housing systems will have substantial effects on costs and other aspects of egg production on both a regional and national scale, with some positive effects but also potential negative effects that need to be carefully considered. This paper discusses the US egg industry in the context of legislation and standards related to hen housing systems. It also addresses initiatives by retailers, nongovernmental organizations, and private certification organizations to shape production practices in the egg industry as well as

Salamander chytrid fungus (Batrachochytrium salamandrivorans) in the United States—Developing research, monitoring, and management strategies

Science.gov (United States)

Grant, Evan H. Campbell; Muths, Erin L.; Katz, Rachel A.; Canessa, Stefano; Adams, Michael J.; Ballard, Jennifer R.; Berger, Lee; Briggs, Cheryl J.; Coleman, Jeremy; Gray, Matthew J.; Harris, M. Camille; Harris, Reid N.; Hossack, Blake R.; Huyvaert, Kathryn P.; Kolby, Jonathan E.; Lips, Karen R.; Lovich, Robert E.; McCallum, Hamish I.; Mendelson, Joseph R.; Nanjappa, Priya; Olson, Deanna H.; Powers, Jenny G.; Richgels, Katherine L. D.; Russell, Robin E.; Schmidt, Benedikt R.; Spitzen-van der Sluijs, Annemarieke; Watry, Mary Kay; Woodhams, Douglas C.; White, C. LeAnn

2016-01-20

of an organizational structure with working groups for a Bsal Task Force, creation of an initial influence diagram to aid in identifying effective management actions in the face of uncertainty, and production of a list of potential management actions and key research uncertainties. Additional products under development include a Bsal Strategic Action plan, an emergency response plan, a monitoring and surveillance program, a standardized diagnostic approach, decision models for natural resource agencies, and a reporting database for salamander mortalities. This workshop was the first international meeting to address the threat of Bsal to salamander populations in the United States, with more than 30 participants from U.S. conservation and resource management agencies (U.S. Fish and Wildlife Service, U.S. Forest Service, U.S. Department of Defense, U.S. National Park Service, and Association of Fish and Wildlife Agencies) and academic research institutions in Australia, the Netherlands, Switzerland, the United Kingdom, and the United States.

Liquid hydrogen production and commercial demand in the United States

Science.gov (United States)

Heydorn, Barbara

1990-01-01

Kennedy Space Center, the single largest purchaser of liquid hydrogen (LH2) in the United States, evaluated current and anticipated hydrogen production and consumption in the government and commercial sectors. Specific objectives of the study are as follows: (1) identify LH2 producers in the United States and Canada during 1980-1989 period; (2) compile information in expected changes in LH2 production capabilities over the 1990-2000 period; (3) describe how hydrogen is used in each consuming industry and estimate U.S. LH2 consumption for the chemicals, metals, electronics, fats and oil, and glass industries, and report data on a regional basis; (4) estimate historical and future consumption; and (5) assess the influence of international demands on U.S. plants.

Transdisciplinary product development

Directory of Open Access Journals (Sweden)

Tomaž Savšek

2015-12-01

Full Text Available Research Question (RQ: How can transdisciplinary approach increase the product development process in future industry? Purpose: The aim of the research is to develop a model of an effective product development in the automotive industry based on the transdisciplinary approach. Method: We used a qualitative research approach in order to develop a theoretical framework of transdisciplinarity. The framework comprises the concurrent engineering and experts from different disciplines. The framework was represented by a mathematical model which based on stochastic dynamic programming. Results: We developed a theoretical frameworkand a practical case of transdisciplinary product development in the automotive industry. We presented a mathematical model and information environment which supports such a model. Organization: The findings of the research will provide higher productivity, lower operating costs, change in personnel structure, higher added value, lower sales costs, lower administration costs, reduction in growth of expenses, and lower costs of work equipment. Society: The research impact on higher customer’s satisfaction, increased flexibility of operations, better quality of information, improved control of sources, less waste materials and less pollution, improved planning process, more favourable consideration of employees , improved portfolio management, and better corporate presentation of company. Originality: Transdisciplinary framework combines methods of concurrent engineering and interdisciplinary approach in a process of product development. The development of such a framework is a complete novelty and represents an original approach to product development, which will be particularly suitable for the smart factories of the future. Transdisciplinary framework was transformed in to a mathematical model based on stochastic dynamic programming. Model is supported by the existing information warehouse and represents a potential for

Practice development units: a study of teamwork.

Science.gov (United States)

Walsh, M; Walsh, A

In this report of a study using the Team Climate Inventory (TCI) tool, the researchers explain how the tool can be used in preparation for creating a practice development unit (PDU). The TCI provides a picture of the level and quality of teamwork in a unit using a series of Likert scales. The ward in this study was found to lack the necessary level of teamwork for successful PDU development and the researchers show how this information shaped trust plans. They recommend that units contemplating PDU accreditation should assess their level of teamwork prior to proceeding with bids.

Developing smokeless tobacco products for smokers: an examination of tobacco industry documents.

Science.gov (United States)

Carpenter, C M; Connolly, G N; Ayo-Yusuf, O A; Wayne, G Ferris

2009-02-01

To investigate whether development of smokeless tobacco products (SLT) is intended to target current smokers. This study analysed internal tobacco industry documents to describe research related to the smokeless tobacco market. Relevant documents included those detailing the development and targeting of SLT products with a particular emphasis on moist snuff. Cigarette and SLT manufacturers recognised that shifting demographics of SLT users, as well as indoor smoking restrictions, health concerns and reduced social acceptability of smoking could impact the growth of the SLT market. Manufacturers developed new SLT products to target cigarette smokers promoting dual cigarette and SLT use. Heavy marketing of new SLT products may encourage dual use and result in unknown public health effects. SLT products have been designed to augment cigarette use and offset regulatory strategies such as clean indoor air laws. In the United States, the SLT strategy may provide cigarette companies with a diversified range of products under the prospect of federal regulation. These products may pose significant challenges to efforts by federal agencies to reduce harm caused by tobacco use.

Research and development for botanical products in medicinals and food supplements market.

Science.gov (United States)

Miroddi, Marco; Mannucci, Carmen; Mancari, Ferdinando; Navarra, Michele; Calapai, Gioacchino

2013-01-01

Botanical products sold in the health area are generally intended as drugs, medicinal products, food supplements or substances for therapeutic use. Use of botanicals for improving or to care human health has evolved independently in different countries worldwide. Regulatory issues regarding botanical products designed for the food supplements or medicinal market and their influence on research and development are discussed. European Union (EU) and United States (US) policies regulating these products are focused with comments on the legislations delivered during the last ten years and differences existing in rules between these countries are emphasized. Research and development on botanical products nowdays strongly influenced by the product destination in the market. Addressed and differentiated research for either food supplements or medicinal markets is necessary to purchase data really useful for assessment of safe and effective use for both the categories. The main objective is to catalyze interest of academic and companies' researchers on crucial aspects to be taken into account in the research for the development of botanical products.

Research and Development for Botanical Products in Medicinals and Food Supplements Market

Directory of Open Access Journals (Sweden)

Marco Miroddi

2013-01-01

Full Text Available Botanical products sold in the health area are generally intended as drugs, medicinal products, food supplements or substances for therapeutic use. Use of botanicals for improving or to care human health has evolved independently in different countries worldwide. Regulatory issues regarding botanical products designed for the food supplements or medicinal market and their influence on research and development are discussed. European Union (EU and United States (US policies regulating these products are focused with comments on the legislations delivered during the last ten years and differences existing in rules between these countries are emphasized. Research and development on botanical products nowdays strongly influenced by the product destination in the market. Addressed and differentiated research for either food supplements or medicinal markets is necessary to purchase data really useful for assessment of safe and effective use for both the categories. The main objective is to catalyze interest of academic and companies' researchers on crucial aspects to be taken into account in the research for the development of botanical products.

76 FR 41525 - Hewlett Packard Global Parts Supply Chain, Global Product Life Cycles Management Unit Including...

Science.gov (United States)

2011-07-14

... Parts Supply Chain, Global Product Life Cycles Management Unit Including Teleworkers Reporting to... workers of Hewlett Packard, Global Parts Supply Chain, Global Product Life Cycles Management Unit...). Since eligible workers of Hewlett Packard, Global Parts Supply Chain, Global Product Life Cycles...

The Perceived Impact of the Agile Development and Project Management Method Scrum on Information Systems and Software Development Productivity

Directory of Open Access Journals (Sweden)

Karlheinz Kautz

2014-11-01

Full Text Available This research contributes to the body of knowledge in information systems development (ISD with an empirical investigation in form of a case study that demonstrates the positive impact of the agile development and project management method Scrum on information systems and software development productivity and it provides a useful operationalization of the concept through seven identified indicators for productivity. Despite the fact that the case unit had challenges with the use of Scrum, the indicators identified the areas where the company had managed to exploit the potential of Scrum and its practices with regard to increasing productivity. The research results are discussed both with regard to the existing Scrum literature as well as to complex adaptive systems (CAS as a foundation for ISD and agile development.

Corn Production. A Unit for Teachers of Vocational Agriculture. Production Agriculture Curriculum Materials Project.

Science.gov (United States)

Grace, Clyde, Jr.

Designed to provide instructional materials for use by vocational agriculture teachers, this unit contains nine lessons based upon competencies needed to maximize profits in corn production. The lessons cover opportunities for growing corn; seed selection; seedbed preparation; planting methods and practices; fertilizer rates and application;…

Global product development

DEFF Research Database (Denmark)

Taylor, Thomas Paul; Ahmed-Kristensen, Saeema

2016-01-01

Selecting key performance indicators in conventional product development is a challenging task for project management and is compound by global product development. Informed from the findings of two in depth case studies conducted with large Danish manufacturing companies, in this paper we develo...

Accelerated product development

NARCIS (Netherlands)

Langerak, F.; Seth, J.N.; Malhotra, N.K.

2011-01-01

Accelerated product development is a competitive strategy that seeks to reduce the development cycle time of new products. However, there has been little theoretical advancement and empirical model testing in the identification of the conditions under which cycle time reduction is appropriate, the

Market-based product development

DEFF Research Database (Denmark)

Bisp, Søren; Harmsen, Hanne

1997-01-01

A large body of research results on successful product development exists. The results are full of normative advice on how to conduct prod-uct development. At the same time studies have shown that product development practice has only to a very li extent been influenced by these research results...

Improving productivity and welfare among workers of small and household textile and garment units in India

Directory of Open Access Journals (Sweden)

Sanjay RODE

2009-06-01

Full Text Available Global Production System has changed remarkably over the period of time. In order to cope up with the change in the nature and type of production, the small and household garment and textile units are employing the younger and skilled labor force. The workers in these units are employed on the contract, causal and temporary basis. They are not given the different benefits as applicable to the large scale unit workers. Such workers are employed more hours and weekly holidays are not given to them. The small and household units are simply maximizing their interest and profit. Such capitalist nature of productive activities makes the labor worse. They are given less wages and classified as unskilled workers. Workers are not given proper training and security of work by these units. Their access to productive assets and standard of living is low as compare to the large unit’s workers. In order to improve the workers conditions, minimum wage should be given to all workers in small and household units. Such units must maintain their annual records of transactions. Small and household units must send their workers for compulsory training. Work place environment, minimum hours of work are required to regulate in these sectors. Immediate steps will have positive impact on workers earning and standard of living. It will help for further productivity enhancement.

Quality and productivity drive innovation and improvement at United Technologies Aerospace Operations, Inc.

Science.gov (United States)

Jamar, L. G.

1986-01-01

Quality and innovation are the hallmarks of the national space program. In programs that preceded the Shuttle Program the emphasis was on meeting the risks and technical challenges of space with safety, quality, reliability, and success. At United Technologies Aerospace Operations, Inc. (UTAO), the battle has developed along four primary fronts. These fronts include programs to motivate and reward people, development and construction of optimized processes and facilities, implementation of specifically tailored management systems, and the application of appropriate measurement and control systems. Each of these initiatives is described. However, to put this quality and productivity program in perspective, UTAO and its role in the Shuttle Program are described first.

Total Factor Productivity Convergence in Africa: Panel Unit Root ...

African Journals Online (AJOL)

The study tested absolute and conditional convergence of Total Factor Productivity in Africa using a sample of 23 countries and TFP data covering the period between 1960 and 2003 while deploying the panel unit root methodology. Countries that have experienced sustained economic growth rate are found to have ...

78 FR 17648 - Energy Conservation Program for Consumer Products: Representative Average Unit Costs of Energy

Science.gov (United States)

2013-03-22

... Conservation Program for Consumer Products: Representative Average Unit Costs of Energy'', dated April 26, 2012... DEPARTMENT OF ENERGY Office of Energy Efficiency and Renewable Energy Energy Conservation Program for Consumer Products: Representative Average Unit Costs of Energy AGENCY: Office of Energy Efficiency...

Beef Cattle Production. An Instructional Unit for Teachers of Adult Vocational Education in Agriculture.

Science.gov (United States)

Metzger, Bruce; Iverson, Maynard J.

The unit on beef cattle production is designed primarily for the adult farmer program in Kentucky as an aid to making the beef enterprise more profitable. It is aimed primarily at the commercial producer. The lessons center on some of the more important economic points in beef cattle production. Ten lessons comprise the unit, which can be adapted…

DESIGN VERSUS PRODUCT DEVELOPMENT?

Directory of Open Access Journals (Sweden)

Edu Grieco Mazzini Junior

2015-03-01

Full Text Available Design or product development? The questioning in relation to the employment of such terminology dates back to possible misconceptions regarding interpretation and approach them. Therefore, it can be stated that there are differences between these two terms? In this context, we highlight two views concerning the origin of the design. The first character creative and based on pre-industrial revolution, based on projective and methodologies directed towards the practice of designing products. And second, where design is understood as an industrial process: the development of new products includes, besides a creative procedure are developed, and symbolic formal solutions for products, but also a technical procedure based on the definition of the requirements concerning the product engineering. Is this the most widely accepted interpretation? theoretical studies were conducted from interpretations of the concept of the design proposed by the International Council of Societies of Industrial Design – ICSDI (2012, and for the characterization of the process of product development, we sought to develop an analogy between these two terminologies and can be proved that the use of one of terminology will not cause deviations of interpretation, since both deal with the life cycle of the product. The main results obtained until now the definition of design proposed by the ICSID where it is characterized as a creative activity focused on the complete life cycle of products is the more approaches of the concept of product development.

Unit Price Scaling Trends for Chemical Products

Energy Technology Data Exchange (ETDEWEB)

Qi, Wei [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Sathre, Roger [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Morrow, III, William R. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Shehabi, Arman [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

2015-08-01

To facilitate early-stage life-cycle techno-economic modeling of emerging technologies, here we identify scaling relations between unit price and sales quantity for a variety of chemical products of three categories - metal salts, organic compounds, and solvents. We collect price quotations for lab-scale and bulk purchases of chemicals from both U.S. and Chinese suppliers. We apply a log-log linear regression model to estimate the price discount effect. Using the median discount factor of each category, one can infer bulk prices of products for which only lab-scale prices are available. We conduct out-of-sample tests showing that most of the price proxies deviate from their actual reference prices by a factor less than ten. We also apply the bootstrap method to determine if a sample median discount factor should be accepted for price approximation. We find that appropriate discount factors for metal salts and for solvents are both -0.56, while that for organic compounds is -0.67 and is less representative due to greater extent of product heterogeneity within this category.

Pharmaceutical quality by design: product and process development, understanding, and control.

Science.gov (United States)

Yu, Lawrence X

2008-04-01

The purpose of this paper is to discuss the pharmaceutical Quality by Design (QbD) and describe how it can be used to ensure pharmaceutical quality. The QbD was described and some of its elements identified. Process parameters and quality attributes were identified for each unit operation during manufacture of solid oral dosage forms. The use of QbD was contrasted with the evaluation of product quality by testing alone. The QbD is a systemic approach to pharmaceutical development. It means designing and developing formulations and manufacturing processes to ensure predefined product quality. Some of the QbD elements include: Defining target product quality profile; Designing product and manufacturing processes; Identifying critical quality attributes, process parameters, and sources of variability; Controlling manufacturing processes to produce consistent quality over time. Using QbD, pharmaceutical quality is assured by understanding and controlling formulation and manufacturing variables. Product testing confirms the product quality. Implementation of QbD will enable transformation of the chemistry, manufacturing, and controls (CMC) review of abbreviated new drug applications (ANDAs) into a science-based pharmaceutical quality assessment.

A Framework For Product Development

DEFF Research Database (Denmark)

McAloone, Timothy Charles; Robotham, Antony John

1999-01-01

-aspect approach to product development; understanding the strategic conditions that affect product development; developing a coherent approach to product quality based on product-life thinking; addressing environmental needs in a proactive manner through innovation techniques; and understanding both...

Platform-based production development

DEFF Research Database (Denmark)

Bossen, Jacob; Brunoe, Thomas Ditlev; Nielsen, Kjeld

2015-01-01

Platforms as a means for applying modular thinking in product development is relatively well studied, but platforms in the production system has until now not been given much attention. With the emerging concept of platform-based co-development the importance of production platforms is though...

The impact of hydraulic flow unit & reservoir quality index on pressure profile and productivity index in multi-segments reservoirs

Directory of Open Access Journals (Sweden)

Salam Al-Rbeawi

2017-12-01

Full Text Available The objective of this paper is studying the impact of the hydraulic flow unit and reservoir quality index (RQI on pressure profile and productivity index of horizontal wells acting in finite reservoirs. Several mathematical models have been developed to investigate this impact. These models have been built based on the pressure distribution in porous media, depleted by a horizontal well, consist of multi hydraulic flow units and different reservoir quality index. The porous media are assumed to be finite rectangular reservoirs having different configurations and the wellbores may have different lengths. Several analytical models describing flow regimes have been derived wherein hydraulic flow units and reservoir quality index have been included in addition to rock and fluid properties. The impact of these two parameters on reservoir performance has also been studied using steady state productivity index.It has been found that both pressure responses and flow regimes are highly affected by the existence of multiple hydraulic flow units in the porous media and the change in reservoir quality index for these units. Positive change in the RQI could lead to positive change in both pressure drop required for reservoir fluids to move towards the wellbore and hence the productivity index.

Scaling net ecosystem production and net biome production over a heterogeneous region in the Western United States

Science.gov (United States)

D.P. Turner; W.D. Ritts; B.E. Law; W.B. Cohen; Z. Yan; T. Hudiburg; J.L. Campbell; M. Duane

2007-01-01

Bottom-up scaling of net ecosystem production (NEP) and net biome production (NBP) was used to generate a carbon budget for a large heterogeneous region (the state of Oregon, 2.5x105 km2 ) in the Western United States. Landsat resolution (30 m) remote sensing provided the basis for mapping land cover and disturbance history...

Development of an advanced, continuous mild gasification process for the production of co-products (Task 1), Volume 1

Energy Technology Data Exchange (ETDEWEB)

Knight, R.A.; Gissy, J.L.; Onischak, M.; Babu, S.P.; Carty, R.H. (Institute of Gas Technology, Chicago, IL (United States)); Duthie, R.G. (Bechtel Group, Inc., San Francisco, CA (United States)); Wootten, J.M. (Peabody Holding Co., Inc., St. Louis, MO (United States))

1991-09-01

Under US DOE sponsorship, a project team consisting of the Institute of Gas Technology, Peabody Holding Company, and Bechtel Group, Inc. has been developing an advanced, mild gasification process to process all types of coal and to produce solid and condensable liquid co-products that can open new markets for coal. The three and a half year program (September 1987 to June 1991) consisted of investigations in four main areas. These areas are: (1) Literature Survey of Mild Gasification Processes, Co-Product Upgrading and Utilization, and Market Assessment; (2) Mild Gasification Technology Development: Process Research Unit Tests Using Slipstream Sampling; (3) Bench-Scale Char Upgrading Study; (4) Mild Gasification Technology Development: System Integration Studies. In this report, the literature and market assessment of mild gasification processes are discussed.

Youth tobacco product use in the United States.

Science.gov (United States)

Lee, Youn Ok; Hebert, Christine J; Nonnemaker, James M; Kim, Annice E

2015-03-01

Noncigarette tobacco products are increasingly popular among youth, especially cigarette smokers. Understanding multiple tobacco product use is necessary to assess the effects of tobacco products on population health. This study examines multiple tobacco product use and associated risk factors among US youth. Estimates of current use were calculated for cigarettes, cigars, smokeless tobacco, hookah, e-cigarettes, pipes, bidis, kreteks, snus, and dissolvable tobacco by using data from the 2012 National Youth Tobacco Survey (n = 24 658), a nationally representative sample of US middle and high school students. Associations between use patterns and demographic characteristics were examined by using multinomial logistic regression. Among youth, 14.7% currently use 1 or more tobacco products. Of these, 2.8% use cigarettes exclusively, and 4% use 1 noncigarette product exclusively; 2.7% use cigarettes with another product (dual use), and 4.3% use 3 or more products (polytobacco use). Twice as many youth use e-cigarettes alone than dual use with cigarettes. Among smokers, polytobacco use was significantly associated with male gender (adjusted relative risk ratio [aRRR] = 3.71), by using flavored products (aRRR = 6.09), nicotine dependence (aRRR = 1.91), tobacco marketing receptivity (aRRR = 2.52), and perceived prevalence of peer use of tobacco products (aRRR = 3.61, 5.73). More than twice as many youth in the United States currently use 2 or more tobacco products than cigarettes alone. Continued monitoring of tobacco use patterns is warranted, especially for e-cigarettes. Youth rates of multiple product use involving combustible products underscore needs for research assessing potential harms associated with these patterns. Copyright © 2015 by the American Academy of Pediatrics.

Fabrication and testing history prototypes and production units

Energy Technology Data Exchange (ETDEWEB)

1954-09-01

From April, 1951 to Aug, 1954, New York Shipbuilding Corp. carried out a subcontract with E.I. du Pont de Nemours & Company that was without parallel in the shipyard`s history. The work, designated the NYX Project for reasons of security, was vital to the operations of the Savannah River Plant, Aiken, S.C., which was then being designed and constructed by du Pont for the Atomic Energy Commission. It consisted of three broad parts: developmental and experimental work; fabrication and testing of a prototype unit; fabrication of production units. Five production units were ultimately built, one of them converted from the prototype. All were fabricated from stainless steel, and involved welding techniques, control of thermal distortion and tolerances never previously attempted on assemblies of comparable size. Du Pont`s technical experience and the background of New York Ship in heavy construction, particularly in the fabrication of naval gun turrets, were combined from the outset to resolve the difficult fabrication problems that occurred almost daily. Representatives of both companies worked together as a team in the shops and at supervisory levels to an unprecedented extent. The report is intended primarily to summarize New York Ship`s part in the project, but also includes some of du Pont`s activities since the work of the two organizations was so interrelated. Because of the scope of the program, it will not always be possible to provide detailed information, but rather to record what happened in general terms. Where the reader desires more specific data, he should refer to original plans and records, including various reports compiled during the course of the project.

Considerations for sustainable influenza vaccine production in developing countries.

Science.gov (United States)

Nannei, Claudia; Chadwick, Christopher; Fatima, Hiba; Goldin, Shoshanna; Grubo, Myriam; Ganim, Alexandra

2016-10-26

Through its Global Action Plan for Influenza Vaccines (GAP), the World Health Organization (WHO) in collaboration with the United States Department of Health and Human Services has produced a checklist to support policy-makers and influenza vaccine manufacturers in identifying key technological, political, financial, and logistical issues affecting the sustainability of influenza vaccine production. This checklist highlights actions in five key areas that are beneficial for establishing successful local vaccine manufacturing. These five areas comprise: (1) the policy environment and health-care systems; (2) surveillance systems and influenza evidence; (3) product development and manufacturing; (4) product approval and regulation; and (5) communication to support influenza vaccination. Incorporating the checklist into national vaccine production programmes has identified the policy gaps and next steps for countries involved in GAP's Technology Transfer Initiative. Lessons learnt from country experiences provide context and insight that complement the checklist's goal of simplifying the complexities of influenza prevention, preparedness, and vaccine manufacturing. Copyright © 2016 The Authors. Published by Elsevier Ltd.. All rights reserved.

Strategies for fuel cell product development. Developing fuel cell products in the technology supply chain

International Nuclear Information System (INIS)

Hellman, H.L.

2004-01-01

Due to the high cost of research and development and the broad spectrum of knowledge and competences required to develop fuel cell products, many product-developing firms outsource fuel cell technology, either partly or completely. This article addresses the inter-firm process of fuel cell product development from an Industrial Design Engineering perspective. The fuel cell product development can currently be characterised by a high degree of economic and technical uncertainty. Regarding the technology uncertainty: product-developing firms are more often then not unfamiliar with fuel cell technology technology. Yet there is a high interface complexity between the technology supplied and the product in which it is to be incorporated. In this paper the information exchange in three current fuel cell product development projects is analysed to determine the information required by a product designer to develop a fuel cell product. Technology transfer literature suggests that transfer effectiveness is greatest when the type of technology (technology uncertainty) and the type of relationship between the technology supplier and the recipient are carefully matched. In this line of thinking this paper proposes that the information required by a designer, determined by the design strategy and product/system volume, should be met by an appropriate level of communication interactivity with a technology specialist. (author)

78 FR 14361 - U.S. Steel Tubular Products, Inc., Mckeesport Tubular Operations Division, Subsidiary of United...

Science.gov (United States)

2013-03-05

... Products, Inc., Mckeesport Tubular Operations Division, Subsidiary of United States Steel Corporation, Mckeesport, PA; Notice of Initiation of Investigation To Terminate Certification of Eligibility Pursuant to... Tubular Products, McKeesport Tubular Operations Division, Subsidiary of United States Steel Corporation...

76 FR 34271 - Hewlett Packard, Global Parts Supply Chain, Global Product Life Cycles Management Unit, Including...

Science.gov (United States)

2011-06-13

... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-74,671] Hewlett Packard, Global Parts Supply Chain, Global Product Life Cycles Management Unit, Including Teleworkers Reporting to... Supply Chain, Global Product Life Cycles Management Unit, including teleworkers reporting to Houston...

The evaluation of effective criteria on site selection for energy production units from cellulosic biomass in Iran

Directory of Open Access Journals (Sweden)

Majid Azizi

2017-12-01

Full Text Available Both Analytical Hierarchy Process (AHP and benefits, opportunities, costs and risks (BOCR techniques were used successfully to evaluate the effective criteria on site selection for energy production unit development from cellulosic biomass in Iran. The results showed that the benefits criteria was at the first level while the initial cellulosic raw materials and opportunities with the aim of the local economy had the second position as the most important indices on site selection. In addition, third criterion has been introduced for the costs criteria (transportation cost and social barriers by the experts. However, risks criteria which referred to instability of providing cellulosic raw materials is one of the less important effective indices on site selection to make energy production unit. The results illustrated that the economy and politics as two environmental effective factors affected on the site selection process generally.

New Product Development and Business Strategy of Research and Development

International Nuclear Information System (INIS)

Lee, Sun Cheol

1998-05-01

The contents of this book are new product development strategy of the top business, commercialization and new product development, development case analysis and framework of new product development, investigation strategy for idea of new product development, case analysis of research as development and goal of new product development, case analysis and planning and management for new product development, innovative item development and technical management against confusion, the map for determination procedure of development, strategy of market and goods and development strategy cases in leading company.

Extending product modeling methods for integrated product development

DEFF Research Database (Denmark)

Bonev, Martin; Wörösch, Michael; Hauksdóttir, Dagný

2013-01-01

Despite great efforts within the modeling domain, the majority of methods often address the uncommon design situation of an original product development. However, studies illustrate that development tasks are predominantly related to redesigning, improving, and extending already existing products...... and PVM methods, in a presented Product Requirement Development model some of the individual drawbacks of each method could be overcome. Based on the UML standard, the model enables the representation of complex hierarchical relationships in a generic product model. At the same time it uses matrix....... Updated design requirements have then to be made explicit and mapped against the existing product architecture. In this paper, existing methods are adapted and extended through linking updated requirements to suitable product models. By combining several established modeling techniques, such as the DSM...

Environmental and economic suitability of forest biomass-based bioenergy production in the Southern United States

Science.gov (United States)

Dwivedi, Puneet

of ethanol produced at the mill was found to be 3.2. The unit cost of production of ethanol was estimated to be $2.05 per gasoline gallon energy equivalent. The study also found that the emerging bioenergy and voluntary carbon markets will significantly increase land expectation values and, thus, the profitability of landowners. Results suggest that the optimal rotation age is insensible to alternate management scenarios. Finally, it was found that all stakeholder groups perceive that the overall benefits of forest biomass-based bioenergy development were higher than its weaknesses.

Low-Cost Rapid Usability Testing: Its Application in Both Product Development and System Implementation.

Science.gov (United States)

Kushniruk, Andre; Borycki, Elizabeth

2017-01-01

In recent years there has been considerable discussion around the need for certification and regulation of healthcare information technology (IT). In particular, the usability of the products being developed needs to be evaluated. This has included the application of standards designed to ensure the process of system development is user-centered and takes usability into consideration while a product is being developed. In addition to this, in healthcare, organizations in the United States and Europe have also addressed the need and requirement for product certification. However, despite these efforts there are continued reports of unusable and unsafe implementations. In this paper we discuss the need to not only include (and require) usability testing in the one-time development process of health IT products (such as EHRs), but we also argue for the need to additionally develop specific usability standards and requirements for usability testing during the implementation of vendor products (i.e. post product development) in healthcare settings. It is further argued that health IT products that may have been certified regarding their development process will still require application of usability testing in the process of implementing them in real hospital settings in order to ensure usability and safety. This is needed in order to ensure that the final result of both product development and implementation processes take into account and apply the latest usability principles and methods.

Customer-driven Product Development

DEFF Research Database (Denmark)

Sommer, Anita Friis

2011-01-01

look for new ways to gain competitive advantage. In competitive markets there is a tendency of shorter product life cycles, and thus a competitive factor is to keep at pace with the market or even driving the market by developing new products. This research study seeks to investigate Customer......Demand chain management is a research area of increasing attention. It is the undertaking of reacting to customer requirements through a responsive chain going from customers through a focal company towards raw material distributors. With faster growing markets and increasing competition, companies......-driven Product Development (CDPD) from a demand chain management perspective. CDPD is the counterpart to typical research and development processes, which has no direct customer involvement. The proposition is that letting customers initiate and participate in the product development process...

9 CFR 327.2 - Eligibility of foreign countries for importation of products into the United States.

Science.gov (United States)

2010-01-01

..., Hungary, Iceland, Ireland (Eire), Italy, Japan, Mexico, Netherlands, New Zealand, Nicaragua, Northern... country, with respect to establishments preparing products in such country for export to the United States... establishments throughout the system at which products are prepared for export to the United States; (B) Ultimate...

Consumer oriented new product development

DEFF Research Database (Denmark)

van Trijp, Hans C.M.; Grunert, Klaus G

2014-01-01

New product development is a necessary activity for a company’s competitiveness, profitability and growth. However, new product development is a risky activity as a large percentage of new product introductions fail to achieve their commercial targets. The present chapter reviews the existing evi...... evidence on new product success and failure factors. From that it introduces the perspective of consumer-oriented new product development as a way to balance new technological opportunity against identified consumer needs and desires....

The Development of Environmental Productivity: the Case of Danish Energy Plants

DEFF Research Database (Denmark)

Henningsen, Geraldine; Henningsen, Arne; Schröder, Sascha Thorsten

2015-01-01

the environmental productivity of individual generator units based on a paneldata set for the period 1998 to 2011 that includes virtually all fuel-fired generator units in Denmark. We further decompose total environmental energy conversion productivity into conversion efficiency, best conversion practice ratio......, and conversion scale efficiency and use a global Malmquist index to calculate the yearly changes. By applying time series clustering, we can identify high, middle, and low performance groups of generator units in a dynamic setting. Our results indicate that the sectoral productivity only slightly increased over...... the fourteen years. Furthermore, we find that there is no overall high achiever group, but that the ranking, although time consistent, varies between the different productivity measures. However, we identify steam turbines and combustion engines for combined heat and power production as potential high...

Advanced Reactor Development in the United States

Energy Technology Data Exchange (ETDEWEB)

Giessing, D. F.; Griffith, J. D.; McGoff, D. J.; Rosen, Sol [U. S. Department of Energy, Texas (United States)

1990-04-15

In the United States, three technologies are employed for the new generation of advanced reactors. These technologies are Advanced Light Water Reactors (A LWRs) for the 1990s and beyond, the Modular High Temperature Gas Reactor (M HTGR) for commercial use after the turn of the century, and Liquid Metal Reactors (LWRs) to provide energy production and to convert reactor fission waste to a more manageable waste product. Each technology contributes to the energy solution. Light Water Reactors For The 1990s And Beyond--The U. S. Program The economic and national security of the United States requires a diversified energy supply base built primarily upon adequate, domestic resources that are relatively free from international pressures. Nuclear energy is a vital component of this supply and is essential to meet current and future national energy demands. It is a safe, economically continues to contribute to national energy stability, and strength. The Light Water Reactor (LWR) has been a major and successful contributor to the electrical generating needs of many nations throughout the world. It is being counted upon in the United States as a key to revitalizing nuclear energy option in the 1990s. In recent years, DOE joined with the industry to ensure the availability and future viability of the LWR option. This national program has the participation of the Nation's utility industry, the Electric Power Research Institute (EPRI), and several of the major reactor manufacturers and architect-engineers. Separate but coordinated parts of this program are managed by EPRI and DOE.

Braille in the United States: Its Production, Distribution, and Use.

Science.gov (United States)

Goldish, Louis Harvey

The braille production system in the United States is described. Aspects treated are the following: the need for braille (the braille system), the market for braille (size and characteristics), sources of braille (producers and braille book source information), and present methods and costs of producing braille. Technological advances are…

Information Flow Scheduling in Concurrent Multi-Product Development Based on DSM

Science.gov (United States)

Sun, Qing-Chao; Huang, Wei-Qiang; Jiang, Ying-Jie; Sun, Wei

2017-09-01

Multi-product collaborative development is adopted widely in manufacturing enterprise, while the present multi-project planning models don't take technical/data interactions of multiple products into account. To decrease the influence of technical/data interactions on project progresses, the information flow scheduling models based on the extended DSM is presented. Firstly, information dependencies are divided into four types: series, parallel, coupling and similar. Secondly, different types of dependencies are expressed as DSM units, and the extended DSM model is brought forward, described as a block matrix. Furthermore, the information flow scheduling methods is proposed, which involves four types of operations, where partitioning and clustering algorithm are modified from DSM for ensuring progress of high-priority project, merging and converting is the specific computation of the extended DSM. Finally, the information flow scheduling of two machine tools development is analyzed with example, and different project priorities correspond to different task sequences and total coordination cost. The proposed methodology provides a detailed instruction for information flow scheduling in multi-product development, with specially concerning technical/data interactions.

Developing new markets for oil sands products

International Nuclear Information System (INIS)

Crandall, G.

2004-01-01

This paper presents a review by Purvin and Gertz of western Canadian crude oil supply. This energy consulting firm provides advise to the energy sector. It suggests that oil sands production will surpass declining conventional production. Oil sands supply includes bitumen, synthetic crude oil (SCO), and diluent. It is forecasted that oil sands will increase from 42 per cent of western supply in 2002 to 78 per cent in 2015. The potential of Alberta's oil sands was discussed along with a recent study of refined products and petrochemicals from bitumen. Upgrading, refining and petrochemical case studies were presented. The author examined if a Canadian oil sands upgrading project with high capital costs can be competitive with competing projects in the United States and internationally. In addition to supply and demand issues, the presentation examined infrastructure capability and market potential in the United States. The economic potential and risks of preferred business cases compared to upgrading to SCO were also evaluated. 15 figs

MODERN TRENDS IN THE DEVELOPMENT OF THE TECHNOLOGIES FOR PRODUCTION OF DENTAL CONSTRUCTIONS.

Directory of Open Access Journals (Sweden)

Tsanka Dikova

2015-12-01

Full Text Available The aim of the present paper is to make a review of the modern trends in the development of the technologies for production of dental constructions. Three are the main trends in production technologies in dentistry last 30 years: digitalization, simulation and implementation of additive technologies. The simulation occurred first and due to the computers development it underwent fast progress from the mathematical calculations and analytical analysis to the 3D modeling and visualization. Thus Computer Aided Engineering (CAE was developed, allowing dental constructions with optimal design to be produced by optimal technological regimes. The first Computer Aided Design (CAD – Computer Aided Manufacturing (CAM systems were created in 1970s as a result of the digitalization. In this mode of operation at first virtual 3D model is generated by CAD, which then is used for production of the real construction by CAM. The CAD-CAM systems allow fabrication of dental restorations which is difficult or impossible to be manufactured by conventional technologies. The development of CAD unit runs from indirect scanning of the plaster model for obtaining data for the 3D model to direct scanning of the prosthesis area. While the development of CAM unit leads to direct manufacturing of the real dental construction using subtractive or additive technologies. The future development of the CAD-CAM systems as a whole characterizes with transition from closed to open access systems, which make them more flexible. In the late 1980sthe new approach to the production of constructions appeared – by addition of material layer by layer. The additive technologies were developed. They characterize with building of one layer at a time from a powder or liquid that is bonded by means of melting, fusing or polymerization. Stereo lithography, fused deposition modeling, selective electron beam melting, laser powder forming and inkjet printing are the methods, mostly used in

Direct-to-Consumer Marketing of Cigar Products in the United States.

Science.gov (United States)

Ganz, Ollie; Teplitskaya, Lyubov; Cantrell, Jennifer; Hair, Elizabeth C; Vallone, Donna

2016-05-01

Although cigar use and sales have increased in the United States over the past decade, little is known about how these products are promoted. Direct-to-consumer (DTC) advertising is a common method used to promote tobacco products and may be a potential channel through which cigars are advertised. Comperemedia (Mintel) was used to acquire opt-in direct mail and email advertising for the top 10 cigar brands in the United States between January 2013 and July 2014. The advertisement and corresponding data on brand, advertising spend, and mail volume were downloaded and summarized. Promotions such as coupons, giveaways, and sweepstakes were also examined. A total of 92 unique advertisements met the search criteria and included two brands: Black & Mild (n = 77) and Swisher Sweets (n = 15). Expenditures on direct mail advertising during this period totaled $12 809 630. Black & Mild encompassed 80% of total direct mail volume and 78% of direct mail advertising expenditures. Almost all advertisements contained at least one promotion (88%) and included a URL to the product website (85%). The results suggest that Black & Mild and Swisher Sweets are the primary cigar brands using DTC advertising. Promotional offers were nearly ubiquitous among the advertisements, which may appeal to price-sensitive populations. Future studies should continue to examine cigar advertising via direct mail and email, in addition to other channels, such as the point-of-sale. Although cigar use and sales have increased in the United States over the past decade, there is limited data on cigar advertising. This article provides a snapshot of expenditures, volume, and promotional content of DTC cigar advertising in the United States between January 2013 and July 2014. © The Author 2015. Published by Oxford University Press on behalf of the Society for Research on Nicotine and Tobacco. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Education for Sustainable Development at the United Nations Conference on Sustainable Development (Rio+20)

Science.gov (United States)

Journal of Education for Sustainable Development, 2012

2012-01-01

The United Nations Conference on Sustainable Development (Rio+20) was held in Rio de Janeiro, Brazil, 20-22 June 2012, marking the twentieth anniversary of the United Nations Conference on Sustainable Development in Rio de Janeiro in 1992 and the tenth anniversary of the 2002 World Summit on Sustainable Development in Johannesburg. With more than…

Overview of the European Medicines Agency's Development of Product-Specific Bioequivalence Guidelines.

Science.gov (United States)

Sullivan, Jane O'; Blake, Kevin; Berntgen, Michael; Salmonson, Tomas; Welink, Jan

2017-12-05

The European Medicines Agency's (EMA) product-specific bioequivalence guidelines outline harmonized regulatory requirements for studies to demonstrate bioequivalence for products that may have particular needs due to their pharmacokinetics, in addition to those outlined in general guidance. As such they are potentially very useful to the pharmaceutical industry in the development of generic medicinal products and to regulatory authorities for harmonized decision-making. Since their introduction in 2013, EMA product-specific bioequivalence guidelines continue to increase in number, and as of June 2017, encompass a number of different pharmacotherapeutic groups and pharmaceutical forms. This article further elucidates the processes involved for stakeholders and reviews the Agency's experience with the development of these guidelines, including the scientific issues witnessed with their advancement. A comparison with the United States Food and Drug Administration approach to similar guidelines is also provided. © 2017 The Authors Clinical Pharmacology & Therapeutics published by Wiley Periodicals, Inc. on behalf of American Society for Clinical Pharmacology and Therapeutics.

The Development of Environmental Productivity: the Case of Danish Energy Plants

DEFF Research Database (Denmark)

Henningsen, Geraldine; Henningsen, Arne; Schröder, Sascha Thorsten

the environmental productivity of individual generator units based on a panel data set for the period 1998 to 2011 that includes virtually all fuel-fired generator units in Denmark. We further decompose total productivity into technical efficiency, best practice ratio, and scale efficiency and use a global...... Malmquist index to calculate the yearly changes. By applying time series clustering, we can identify high, middle, and low performance groups of generator units in a dynamic setting. Our results indicate that the sectoral productivity only slightly increased over the fourteen years. Furthermore, we find...... that there is no overall high achiever group, but that the ranking, although time consistent, varies between the different productivity measures. However, we identify steam turbines and combustion engines for combined heat and power production as potential high performers, while combustion engines that only produce...

Design, development and production of the TNF-XI new powder package

International Nuclear Information System (INIS)

Naigeon, P.; Brut, S.; Fujiwara, T.; Cohen, M.E.

2004-01-01

The TNF-XI was jointly developed by COGEMA LOGISTICS of France and Nuclear Fuel Industries, Ltd. (NFI) of Japan. The design and development of this package were started in 2000 and it was first used in 2003. The package design was based on the COGEMA LOGISTICS TN trademark UO2 package, which is cylindrical. To optimize the use of space and to facilitate operations, the TNF-XI incorporates four cavities. Each cavity is similar to one TN trademark U02. The overall shape of the package is approximately a one-meter cube, which allows it to be easily arranged and stacked in a transport container. It has a total weight of nearly 1 metric ton when loaded with 300 kg of uraniferous oxide material. The powder (or pellets) is placed inside NFI pails, and three pails are placed inside each cavity. The test results and analyses were documented in the French, Japanese, and United States 'Safety Analysis Reports' in order to get approvals in these countries. Additionally, the French license was validated in other countries. The 'Safety Analysis Reports' were prepared by COGEMA LOGISTICS in France, NFI in Japan and PACKAGING TECHNOLOGY, Inc. in the USA. In order to transform the TNF-XI design into a fleet of 800 packagings, a successful mass production process had to be developed and put into place by COGEMA LOGISTICS and the fabricator MECAGEST. Adopting mass production methods was challenging - not only because of the large quantity of packages, but also because of the rate of production (50 units per month minimum), quality requirements and the need to keep low packaging costs. This resulted in a significant challenge for mass producing the packaging: what was needed was a robust, efficient, and well-organized process. During the development of the manufacturing process, we also worked on shortening the learning curve

Bioethanol production from crops - recent developments

International Nuclear Information System (INIS)

Dalton, Colin

1992-01-01

The author notes much higher rates of ethanol production in Brazil and the United States of America than in the European Economic Community. While bioethanol from arable crops makes environmental sense there is, at present, a sizeable difference between the value of fuel ethanol (Pound 100-130/t) and the cost of producing it (Pound 236-Pound 450/t). This gap could be remedied using excise duty. Farmers would like to change crop production but await a political initiative. The technology for bioethanol production still needs some fine tuning, with ETBE (an ether produced from reacting isobutylene with ethanol) being preferred to other methods. (UK)

Development of an advanced, continuous mild gasification process for the production of co-products (Task 1), Volume 1. Final report

Energy Technology Data Exchange (ETDEWEB)

Knight, R.A.; Gissy, J.L.; Onischak, M.; Babu, S.P.; Carty, R.H. [Institute of Gas Technology, Chicago, IL (United States); Duthie, R.G. [Bechtel Group, Inc., San Francisco, CA (United States); Wootten, J.M. [Peabody Holding Co., Inc., St. Louis, MO (United States)

1991-09-01

Under US DOE sponsorship, a project team consisting of the Institute of Gas Technology, Peabody Holding Company, and Bechtel Group, Inc. has been developing an advanced, mild gasification process to process all types of coal and to produce solid and condensable liquid co-products that can open new markets for coal. The three and a half year program (September 1987 to June 1991) consisted of investigations in four main areas. These areas are: (1) Literature Survey of Mild Gasification Processes, Co-Product Upgrading and Utilization, and Market Assessment; (2) Mild Gasification Technology Development: Process Research Unit Tests Using Slipstream Sampling; (3) Bench-Scale Char Upgrading Study; (4) Mild Gasification Technology Development: System Integration Studies. In this report, the literature and market assessment of mild gasification processes are discussed.

Developing a Decision Model of Sustainable Product Design and Development from Product Servicizing in Taiwan

Science.gov (United States)

Huang, Yu-Chen; Tu, Jui-Che; Hung, So-Jeng

2016-01-01

In response to the global trend of low carbon and the concept of sustainable development, enterprises need to develop R&D for the manufacturing of energy-saving and sustainable products and low carbon products. Therefore, the purpose of this study was to construct a decision model for sustainable product design and development from product…

Developing Boiler Concepts as Integrated Units

DEFF Research Database (Denmark)

Sørensen, Kim; Condra, Thomas Joseph; Houbak, Niels

2004-01-01

- consisting of pressure part, burner and control system. The Technical University of Denmark, MEK - Energy Engineering Section [12] has participated in the modelling process. The project has included static and dynamic modelling of the boiler concept. For optimization of operation, verication of performance......With the objective to be able to optimize the design and operation of steam boiler concepts Aalborg Industries A/S [1] has together with Aalborg University, Institute of Energy Technology [9] carried out a development project paying special attention to the boiler concept as an integrated unit......, emissions and to obtain long time operation experiences with the boiler concept, a full scale prototype has been built and these tests have been accomplished on the prototype. By applying this integrated unit approach to the boiler concept development it has been possible to optimize the different building...

Impact of product development efforts on product introduction and product customization abilities

DEFF Research Database (Denmark)

Chaudhuri, Atanu; Dawar, Saloni

2014-01-01

This paper investigates the impact of efforts in new product development-manufacturing integration (NPDMI) on new product introduction (NPI) and product customization (PC) abilities and the moderating effects of product design complexity and importance of new product development order winners...... (NPIOW) on the above relationships. The results from the data on 136 Indian manufacturing plants show that NPDMI, product design complexity and NPIOW all have significant positive impact on NPI and PC abilities. Importance of NPIOW has a positive moderating effect on the relationship between NPDMI and PC...... ability change but product design complexity demonstrate no such effect on the above relationships....

Consumer oriented new product development

DEFF Research Database (Denmark)

van Trijp, Hans C.M.; Grunert, Klaus G

2014-01-01

New product development is a necessary activity for a company’s competitiveness, profitability and growth. However, new product development is a risky activity as a large percentage of new product introductions fail to achieve their commercial targets. The present chapter reviews the existing...

Production-history projections of fuels and some crucial metals in the United States

Energy Technology Data Exchange (ETDEWEB)

Arndt, R A; Roper, L D

1977-09-01

The production-history projection method of the authors is refined to determine the earliest date at which reasonably well-determined depletion parameters can be ascertained. The method is applied to the United States production data for silver, crude oil, natural gas, coal, iron ore, and uranium ore. 13 references.

Who, what, and why: the products, their use, and issues about management of non-timber forest products in the United States

Science.gov (United States)

Susan J. Alexander

2001-01-01

Non-timber forest products in the United States include floral greens, Christmas ornamentals, wild edibles, medicinals, crafts, and transplants. Non-timber forest products are important to many people for many reasons. People harvest products from forests for personal use, cultural practices, and sale. The tremendous variety of species harvested for the many markets...

The development of the operational program for seismic monitoring system of Uljin Unit 1 and 2

Energy Technology Data Exchange (ETDEWEB)

Lee, J.R.; Heo, T.Y.; Cho, B.H. [Korea Electric Power Research Institute, Taejeon (Korea, Republic of); Kang, T.G.; Kim, H.M.; Kim, Y.S.; Oh, S.M.; Kang, Y.S. [Korea Electric Power Data Network Co., Seoul (Korea, Republic of)

1997-12-31

Due to aging of the imported seismic monitoring system of Uljin of t 1 and 2 units it is difficult for this system to provide enough functions needed for the security of seismic safety and the evaluation of the earthquake data from the seismic instrumentation. For this reason, it is necessary to replace the seismic monitoring system of Uljin 1 and 2 units with a new system which has the localized and upgraded hardware and corresponding software. In the part of standardization of existing seismic monitoring system, furthermore, it is necessary to develop the seismic wave analysis system which incorporate newly developed software and can real-timely analyze the seismic wave. This report is the finial product of research project ``The development of the operational program for seismic monitoring system of Uljin Unit 1 and 2`` which have been performed from June 1996 to June 1997 by KEPRI and KDN. Main accomplishments - Review of regulatory criteria for seismic monitoring system -Analysis and upgrade of hardware system -Analysis and upgrade of software system - Development of seismic wave analysis system. (author). 17 refs., 49 figs., 6 tabs.

Quasi-symmetric Conjugacy of Blaschke Products on the unit Circle

DEFF Research Database (Denmark)

Petersen, Carsten Lunde

2007-01-01

Let B be a Blaschke product for which the restriction to the unit circle 1 is a degree d > 1 covering. We prove that B is quasi-symmetrically conjugate to z zd on 1, if all its periodic points in 1 are repelling and if 1 does not intersect the -limit set of any recurrent critical point for B....

Green development within Product families

DEFF Research Database (Denmark)

Lenau, Torben Anker; Willum, Ole; Frees, Niels

2000-01-01

occur, and uncover where the improvement potentials are in the product. The environmental knowledge obtained in this context will be valid for a number of years, and both the producer and other interested parties can use this information for setting priorities in their future planning. However, it can...... be very time consuming to perform an environmental Life Cycle Assessment (LCA), and it would be an advantage if a number of similar products - product families - could be handled in one and the same LCA as a whole. The project has presently developed a method for selecting and forming product families......From 1991 to 1996 the EDIP-methodology (Environmental Design of Industrial Products) was developed. One experience from the EDIP-project is that environmental assessment of products must give simple and operational conclusions, which can be acknowledged in the product development and by other...

Virtual Product Development on Venturi Pump

Directory of Open Access Journals (Sweden)

Sava Ianici

2011-10-01

Full Text Available Market globalization and increased customer demands are leading providers of low product series to the high cost of development and construction. To overcome noted challenges it is necessary to use process of virtual product development. In that way it is possible, even in early phases of product development, to assess the operational product behaviour. Even the specific customer demands are determined before the actual product design phase. The paper presents an up to date concept of virtual product development with application on assessment of operational behaviour of Venturi pumps.

Enhancing Conservation with High Resolution Productivity Datasets for the Conterminous United States

Science.gov (United States)

Robinson, Nathaniel Paul

Human driven alteration of the earth's terrestrial surface is accelerating through land use changes, intensification of human activity, climate change, and other anthropogenic pressures. These changes occur at broad spatio-temporal scales, challenging our ability to effectively monitor and assess the impacts and subsequent conservation strategies. While satellite remote sensing (SRS) products enable monitoring of the earth's terrestrial surface continuously across space and time, the practical applications for conservation and management of these products are limited. Often the processes driving ecological change occur at fine spatial resolutions and are undetectable given the resolution of available datasets. Additionally, the links between SRS data and ecologically meaningful metrics are weak. Recent advances in cloud computing technology along with the growing record of high resolution SRS data enable the development of SRS products that quantify ecologically meaningful variables at relevant scales applicable for conservation and management. The focus of my dissertation is to improve the applicability of terrestrial gross and net primary productivity (GPP/NPP) datasets for the conterminous United States (CONUS). In chapter one, I develop a framework for creating high resolution datasets of vegetation dynamics. I use the entire archive of Landsat 5, 7, and 8 surface reflectance data and a novel gap filling approach to create spatially continuous 30 m, 16-day composites of the normalized difference vegetation index (NDVI) from 1986 to 2016. In chapter two, I integrate this with other high resolution datasets and the MOD17 algorithm to create the first high resolution GPP and NPP datasets for CONUS. I demonstrate the applicability of these products for conservation and management, showing the improvements beyond currently available products. In chapter three, I utilize this dataset to evaluate the relationships between land ownership and terrestrial production

HTGR development in the United States of America

International Nuclear Information System (INIS)

Fox, J.E.

1991-01-01

The status of high temperature gas-cooled reactors (HTGR) development in the United States of America is described, including the organizational structure for the development support, HTGR development programme, and plans for future activities in the field

The Challenges of New Product Development in a Developing Economy

OpenAIRE

M. O. Oduola; A. M. Yakubu

2017-01-01

New Product Development (NPD) involves creating a new product from concept to the market. The product could be entirely new or rebranding. It is a critical focus of any production firm. The increase in volume of new competitive products is an indicator of any fast growing production concern. However the challenges that could affect development of a new product in a developing economy include, but not limited to the following: Inadequate infrastructural facilities, lack of funding, low technol...

CIRP Design 2012 Sustainable Product Development

CERN Document Server

2013-01-01

During its life cycle, a product produces waste that is over 20 times its weight. As such it is critical to develop products that are sustainable. Currently product development processes lack high quality methods and tools that are empirically validated to support development of sustainable products. This book is a compilation of over forty cutting edge international research papers from the 22nd CIRP International Design Conference, written by eminent researchers from 15 countries, on engineering design process, methods and tools, broadly for supporting sustainable product development.   A variety of new insights into the product development process, as well as a host of methods and tools that are at the cutting edge of design research are discussed and explained covering a range of diverse topics. The areas covered include: ·Sustainable design and manufacturing, ·Design synthesis and creativity, ·Global product development and product life cycle management, ·Design for X (safety, reliability, manufactu...

Environmental tools in product development

DEFF Research Database (Denmark)

Wenzel, Henrik; Hauschild, Michael Zwicky; Jørgensen, Jørgen

1994-01-01

A precondition for design of environmentally friendly products is that the design team has access to methods and tools supporting the introduction of environmental criteria in product development. A large Danish program, EDIP, is being carried out by the Institute for Product Development, Technical...... University of Denmark, in cooperation with 5 major Danish companies aiming at the development and testing of such tools. These tools are presented in this paper...

Implicit Tariffs on Imported Dairy Product Components in the United States

OpenAIRE

Tellioglu, Isin; Bailey, Kenneth W.; Blandford, David

2007-01-01

The majority of the dairy products imported by the United States are intermediate products used in food processing. As such, they are demanded for their components such as milk fat and protein. The implications of the U.S. tariff structure for import demand must be viewed in terms of the tariff's effects upon the relative prices of imported milk components. In this article we examine the implications of the current tariff structure and proposed changes under the Doha Round of international tr...

BN-1200 Reactor Power Unit Design Development

International Nuclear Information System (INIS)

Vasilyev, B.A.; Shepelev, S.F.; Ashirmetov, M.R.; Poplavsky, V.M.

2013-01-01

Main goals of BN-1200 design: • Develop a reliable new generation reactor plant for the commercial power unit with fast reactor to implement the first-priority objectives in changing over to closed nuclear fuel cycle; • Improve technical and economic indices of BN reactor power unit to the level of those of Russian VVER of equal power; • Enhance the safety up to the level of the requirements for the 4th generation RP

Attributing Crop Production in the United States Using Artificial Neural Network

Science.gov (United States)

Ma, Y.; Zhang, Z.; Pan, B.

2017-12-01

Crop production plays key role in supporting life, economy and shaping environment. It is on one hand influenced by natural factors including precipitation, temperature, energy, and on the other hand shaped by the investment of fertilizers, pesticides and human power. Successful attributing of crop production to different factors can help optimize resources and improve productivity. Based on the meteorological records from National Center for Environmental Prediction and state-wise crop production related data provided by the United States Department of Agriculture Economic Research Service, an artificial neural network was constructed to connect crop production with precipitation and temperature anormlies, capital input, labor input, energy input, pesticide consumption and fertilizer consumption. Sensitivity analysis were carried out to attribute their specific influence on crop production for each grid. Results confirmed that the listed factors can generally determine the crop production. Different state response differently to the pertubation of predictands. Their spatial distribution is visulized and discussed.

SECURITY IN SUSTAINABLE DEVELOPMENT: COMPARING UNITED NATIONS 2030 AGENDA FOR SUSTAINABLE DEVELOPMENT WITH MILLENNIUM DECLARATION

Directory of Open Access Journals (Sweden)

Ahmet BARBAK

2017-06-01

Full Text Available This study aims to compare United Nations 2030 Agenda for Sustainable Development with Millennium Declaration in terms of their security conceptualizations to explore changes in security thinking and policy components (goals, targets, principles, priorities etc. over time. In doing so, it is envisaged that United Nations’ expectations from member states regarding their national security policies and organizations could be revealed. Security thinking has changed since late 1980’s with the introduction of sustainable development approach by the United Nations. This shift in security thinking encompasses human security and security-development nexus. Holding all member states responsible, Millennium Declaration and 2030 Agenda for Sustainable Development constitute the primary and the most recent outcome documents of United Nations’ sustainable development policy. Both documents have security components. This enables extracting security elements and comparing them with an analytical manner. Consequently, findings are compared and discussed in terms of public policy and organization at national level.

MEASURING PRODUCTIVITY OF SOFTWARE DEVELOPMENT TEAMS

Directory of Open Access Journals (Sweden)

Goparaju Purna Sudhakar

2012-02-01

Full Text Available This paper gives an exhaustive literature review of the techniques and models available tomeasure the productivity of software development teams. Definition of productivity, measuringindividual programmer’s productivity, and measuring software development team productivity arediscussed. Based on the literature review it was found that software productivity measurement canbe done using SLOC (Source Lines of Code, function points, use case points, object points, andfeature points. Secondary research findings indicate that the team size, response time, taskcomplexity, team climate and team cohesion have an impact on software development teamproductivity. List of factors affecting the software development team productivity are studied andreviewed.

The United Nations University and Information Development.

Science.gov (United States)

Tanaskovic, Ines Wesley

1994-01-01

Describes the role of the United Nations University (UNU) in promoting the effective use of new information technologies in support of science and technology for development. The UNU Information and Decision Systems (INDES) project examines the constraints preventing developing nations from using advances in informatics and from integrating their…

Development of a biorefinery optimized biofuel supply curve for the Western United States

International Nuclear Information System (INIS)

Parker, Nathan; Tittmann, Peter; Hart, Quinn; Nelson, Richard; Skog, Ken; Schmidt, Anneliese; Gray, Edward; Jenkins, Bryan

2010-01-01

A resource assessment and biorefinery siting optimization model was developed and implemented to assess potential biofuel supply across the Western United States from agricultural, forest, urban, and energy crop biomass. Spatial information including feedstock resources, existing and potential refinery locations and a transportation network model is provided to a mixed integer-linear optimization model that determines the optimal locations, technology types and sizes of biorefineries to satisfy a maximum profit objective function applied across the biofuel supply and demand chain from site of feedstock production to the product fuel terminal. The resource basis includes preliminary considerations of crop and residue sustainability. Sensitivity analyses explore possible effects of policy and technology changes. At a target market price of 19.6 $ GJ -1 , the model predicts a feasible production level of 610-1098 PJ, enough to supply up to 15% of current regional liquid transportation fuel demand. (author)

Coordiantion by using Product Specifications in Product Development

DEFF Research Database (Denmark)

Terkelsen, Søren Bendix

1997-01-01

This paper is based on a case study. It treats the coordination by generating product specifications in product development. This paper contains three very important aspects, which cause a need for coordination, and call attention to the coordination mechanisms. The three aspects are task...... uncertainty, task complexity, and dependencies between activities. If one want to select coordination mechanisms, which improve the performance in product development, it is very important to have a knowledge about these three aspects. In the following the aspects are identified in the literature...

Life cycle inventory for the production of germinated oil palm seeds at a selected seed production unit in Malaysia

Science.gov (United States)

Khairuddin, Nik Sasha Khatrina; Ismail, B. S.; Muhamad, Halimah; May, Choo Yuen

2013-11-01

The increasing global demand for edible oil has encouraged Malaysia to increase the areas under oil palm cultivation. The total demand for germinated oil palm seeds in the years 2009, 2010, 2011 and 2012 were 86.4, 76.5, 72.6 and 75.2 million, respectively. Production of germinated oil palm seeds is the first link in the palm oil supply chain. Therefore, good management practices at seed production stage is required to ensure only high quality germinated oil palm seeds are produced before sale to customers. Life cycle assessment (LCA) has been used as a tool to assess environmental impact of the processes throughout a product's lifespan and this approach is an important tool for assessing green house gas (GHG) emission. For this study, a gate-to-gate life cycle inventory (LCI) of a single germinated oil palm seed production unit was carried out. The functional unit used for this LCI was one germinated oil palm seed. To determine the environmental impact for the production of germinated oil palm seeds, information on the inputs were obtained. The inputs for the production of germinated oil palm seeds involved materials such as polyethylene bags, electricity, water, chemicals and fungicides. For this study, the system boundary involved seed germination process and management of germinated oil palm seeds. It was found that the amount of input such as materials and energy used in the production of germinated oil palm seeds was very minimal.

Relative emissions intensity of dairy production systems: employing different functional units in life-cycle assessment.

Science.gov (United States)

Ross, S A; Topp, C F E; Ennos, R A; Chagunda, M G G

2017-08-01

This study aimed to assess the merit and suitability of individual functional units (FU) in expressing greenhouse gas emissions intensity in different dairy production systems. An FU provides a clearly defined and measurable reference to which input and output data are normalised. This enables the results from life-cycle assessment (LCA) of different systems to be treated as functionally equivalent. Although the methodological framework of LCA has been standardised, selection of an appropriate FU remains ultimately at the discretion of the individual study. The aim of the present analysis was to examine the effect of different FU on the emissions intensities of different dairy production systems. Analysis was based on 7 years of data (2004 to 2010) from four Holstein-Friesian dairy systems at Scotland's Rural College's long-term genetic and management systems project, the Langhill herd. Implementation of LCA accounted for the environmental impacts of the whole-farm systems and their production of milk from 'cradle to farm gate'. Emissions intensity was determined as kilograms of carbon dioxide equivalents referenced to six FU: UK livestock units, energy-corrected milk yield, total combined milk solids yield, on-farm land used for production, total combined on- and off-farm land used for production, and the proposed new FU-energy-corrected milk yield per hectare of total land used. Energy-corrected milk was the FU most effective for reflecting differences between the systems. Functional unit that incorporated a land-related aspect did not find difference between systems which were managed under the same forage regime, despite their comprising different genetic lines. Employing on-farm land as the FU favoured grazing systems. The proposed dual FU combining both productivity and land use did not differentiate between emissions intensity of systems as effectively as the productivity-based units. However, this dual unit displayed potential to quantify in a simple way

Wood products used for residential repair and remodeling in the United States, 1991

Science.gov (United States)

D. B. McKeever; R. G. Anderson

Large amounts of lumber and wood panel products are used annually for the repair and remodeling of residential structures and properties in the United States. In response to the need by government and industry for detailed information on this important market for timber products, a study was conducted by the Timber Demand and Technology...

Itegrated Test and Evaluation of a 4-Bed Molecular Sieve (4BMS) Carbon Dioxide Removtal System (CDRA), Mechanical Compressor Engineering Development Unit (EDU), and Sabitier Engineering Development Unit (EDU)

Science.gov (United States)

Knox, James C.; Campbell, Melissa; Murdoch, Karen; Miller, Lee A.; Jeng, Frank

2005-01-01

Currently on the International Space Station s (ISS) U.S. Segment, carbon dioxide (CO2) scrubbed from the cabin by a 4-Bed Molecular Sieve (4BMS) Carbon Dioxide Removal Assembly (CDRA) is vented overboard as a waste product. Likewise, the product hydrogen (H2) that will be generated by the Oxygen Generation Assembly (OGA) planned for installation will also be vented. A flight experiment has been proposed that will take the waste CO2 removed from the cabin, and via the catalytic Sabatier process, reduce it with waste H2 to generate water and methane. The water produced may provide cost and logistics savings for ISS by reducing the amount of water periodically re-supplied to orbit. To make this concept viable, a mechanical piston compressor and accumulator were developed for collecting and storing the CO2 from the CDRA. The compressor, accumulator and Sabatier system would be packaged together as one unit and referred to as the Carbon Dioxide Reduction Assembly (CRA). Testing was required to evaluate the performance of a 4BMS CDRA, compressor, accumulator, and Sabatier performance along with their operating rules when integrated together. This had been numerically modeled and simulated; however, testing was necessary to verify the results from the engineering analyses. Testing also allowed a better understanding of the practical inefficiencies and control issues involved in a fully integrated system versus the theoretical ideals in the model. This paper presents and discusses the results of an integrated engineering development unit test.

Developing and promoting OKP production system: a JIT production planning approach

Science.gov (United States)

Samavati, Mehran

2011-10-01

The role of production in competitive system of market on one hand and the changing conditions of market on the other hand has caused the need for more developed planning in such environments. The general purpose of the present research is to realize One-of- a- Kind- Product model (OKP) that is developed in two stages. In OKP model presented in 1994 only one sample of each product is produced and only one production method is considered for each product. In order to make OKP model more real and to use it in promoting more production methods, the following developments were made in this research: 1-First Development: Considering various methods for producing each product. 2-Second Development: Producing more than one sample of each product, while considering various production methods for each product. These models promoted OKP model of 1994. They can be used in more diversified production methods in order to promote them. In present model, while describing the main OKP model new models are provided as well. The significance of OKP has been described in Introduction

The role of sensory perception in the development and targeting of tobacco products.

Science.gov (United States)

Carpenter, Carrie M; Wayne, Geoffrey Ferris; Connolly, Gregory N

2007-01-01

To examine tobacco industry research on smoking-related sensory effects, including differences in sensory perception across smoker groups, and to determine whether this research informed targeted product development and impacted the development of commercial tobacco products. We searched previously secret internal tobacco industry documents available online through document databases housed at Tobacco Documents Online, the British American Tobacco Document Archive and the Legacy Tobacco Documents Library. We identified relevant documents using a snowball sampling method to first search the databases using an initial set of key words and to then establish further search terms. Sensory research is a priority within the tobacco industry directly impacting commercial markets both in the United States and internationally. Sensory factors contribute to smoker satisfaction and product acceptance, and play an important role in controlling puffing behavior. Cigarette manufacturers have capitalized on distinct sensory preferences across gender, age and ethnic groups by tailoring products for specific populations. Regulation of tobacco products is needed to address product changes that are used to reinforce or contribute to tobacco dependence; for instance, the incorporation of additives that target attributes such as smoothness, harshness and aftertaste. Greater understanding of the role of sensory effects on smoking behavior may also help to inform the development of tobacco treatment options that support long-term tobacco abstinence.

Improving rapeseed production practices in the southeastern United States

Energy Technology Data Exchange (ETDEWEB)

Thomas, D.L.; Breve, M.A.; Raymer, P.L.; Minton, N.A.; Sumner, D.R. (Georgia Univ., Tifton, GA (USA). Georgia Coastal Plain Experiment Station)

1990-04-01

Oilseed rape or rapeseed is a crop which offers a potential for double-cropping in the southeastern United States. This final project report describes the results from a three year study aimed at evaluating the effect of different planting and harvesting practices on establishment and yield of three rape cultivars, and the double cropping potential of rapeseed in the southeastern United States. The project was conducted on two yield sites in Tifton, Georgia during 1986--87, 1987--88 and 1988--89. The general objective of this research is to improve the seed and biomass yield of winter rapeseed in the southeastern United States by developing appropriate agronomic practices for the region. The primary constraint is to grow rapeseed within the allowable period for double cropping with an economically desirable crop, such as peanut or soybean. Planting and harvesting are the most critical steps in this process. Therefore, the specific objectives of this research were: evaluate and improve the emergence of rapeseed by developing planting techniques that enhance the soil, water and seed regimes for winter rapeseed in the southeast, and evaluate and improve the yields of harvested rapeseed by developing techniques for determining the optimum timing of harvest and efficient methods for harvesting winter rapeseed in the southeast. 6 refs., 12 figs., 9 tabs.

The United States Atomic Energy Commission programme on isotopes and radiation development and its industrial impact

Energy Technology Data Exchange (ETDEWEB)

Fowler, E E [United States Atomic Energy Commission, Division of Isotopes Development, Washington, DC (United States)

1965-02-01

The US Atomic Energy Commission isotopes development programme is directed towards (a) encouraging development of beneficial applications of radioisotopes and radiation technology, particularly those designed to meet problems of urgent public interest; (b) accelerating the potential contribution of radioisotopes and radiation applications to the national economy and welfare, and (c) contributing to world development in the peaceful uses of atomic energy. The programme is administered by the Division of Isotopes Development. The programme objectives are being achieved through a multiphase research and development programme including the following major elements: (1) Radiation pasteurization of food, involving development of technology for low dose radiation processing of representative fruit and fishery products to extend their refrigerated shelf life; (2) Process radiation development, directed to fostering development of a broad technology leading to productive use of mega curie quantities of fission products and other radioisotopes for process radiation purposes; (3) Radioisotope technology development, directed to creating a broad base of new and improved technology required for extending and speeding up the application of radioisotopes in science and technology; (4) Radioisotope production and separation technology, directed to insuring availability of radioisotopes to meet the changing needs of advancing science and technology in the USA; (5) Isotopic power and heat sources development, aimed at the development and production of isotopic fuels and fuel forms for a broad spectrum of thermal applications, including SNAP auxiliary electrical power devices; (6) Analysis and applications, whose objective is to identify and analyse radioisotope and radiation research and development activities in the United States of America and abroad; to establish channels of communication with science, government, and industry, and to encourage broad dissemination and productive

76 FR 13168 - Energy Conservation Program for Consumer Products: Representative Average Unit Costs of Energy

Science.gov (United States)

2011-03-10

... average unit costs of residential energy in a Federal Register notice entitled, ``Energy Conservation... DEPARTMENT OF ENERGY Office of Energy Efficiency and Renewable Energy Energy Conservation Program for Consumer Products: Representative Average Unit Costs of Energy AGENCY: Office of Energy Efficiency...

"They're Pretty Much Made for Blunts": Product Features That Facilitate Marijuana Use Among Young Adult Cigarillo Users in the United States.

Science.gov (United States)

Giovenco, Daniel P; Miller Lo, Erin J; Lewis, M Jane; Delnevo, Cristine D

2017-11-01

Cigarillo use is prevalent among young adults in the United States. Many young people use cigarillos as "blunts," a term for a cigar emptied of its tobacco and replaced with marijuana. Because cigars in the United States are not subject to the same regulations as cigarettes, they offer a diverse selection of flavors and packaging styles. It is unclear how these and other product attributes facilitate blunt use. Semi-structured telephone interviews were conducted with a sample of 40 young adult cigar or cigarillo users in the United States to assess patterns of use and perceptions about product features. Quotations from interview transcripts were coded for major themes and summarized across participants. Regardless of their preferred brand, participants felt that the brand Black & Mild is primarily smoked for the tobacco. There was a strong perception, however, that other popular cigarillo brands are almost always used to make blunts. Participants believed that cigarillo companies design their products to simplify blunt-making, with features such as perforated lines or wrappings that unroll easily. Resealable foil pouches, a popular packaging style, are often used to hold unused marijuana and mask its smell. Blunt use is pervasive among young adult cigarillo users in the United States, and certain cigar companies have developed products that facilitate blunt-making. Future surveillance measures should capture the extent to which cigarillo users are using these products as blunts. Continued surveillance of cigarillo sales and popular product attributes are needed. Cigarillo use is prevalent among young adults in the United States, many of whom are using the products as blunts. This study found that product features such as brand, flavor, packaging, and price influence the selection of cigarillos used for this purpose. There is also a strong perception among young adult cigarillo users that cigarillo companies design their products and packaging to make the blunt

DESIGN OF OYSTER (PLEUROTUS OSTREATUS PRODUCTION UNIT TAKING INTO ACCOUNT ITS AGROTECHNIC OF GROWIGN AND QUALITY AND QUANTITY OF ITS PRODUCTION

Directory of Open Access Journals (Sweden)

Marcel Golian

2015-02-01

Full Text Available According to influence of population increasing followed by agricultural soils decreasing there is noticed a necessity of individual food commodities production intensification. There is also needed to think about some new unconventional and alternative sort of food-stuff. An edible mushroom growing is one of the relatively new agricultural branches, whereby on a large scale there are grown species which belong to saprophytic group. The aim of task was the building – technological and equipment – technological proposal of oyster (Pleurotus ostreatus, Jacq. P. Kumm production unit with taking account to its specific agro technical requirements and valid legislative. In the next part of task there were evaluated and compared qualitative and quantitative parameters of sporocarps from two variants which were collected in the first growth wave and accuracy of the proposed oyster production unit. In case of variant A there were used sacks with substrates, which have been exposed to cold shock by 6°C temperature for 4 days and in variant B were used substrates without cold shock. According to reached results the cold shock had almost neither influence on production quantity. There was found out an important fact that crop height from first growth wave wasn´t identical with well-known literature sources. The low crop is connected with high CO2 content in oyster production unit room, according to our opinion. Other equipment aimed to air humidity regulation, air temperature regulation and room lights was designed correctly.

Integrating Product and Technology Development

DEFF Research Database (Denmark)

Meijer, Ellen Brilhuis; Pigosso, Daniela Cristina Antelmi; McAloone, Tim C.

2016-01-01

.g. managing dependencies) and opportunities (e.g. streamlining development). This paper presents five existing reference models for technology development (TD), which were identified via a systematic literature review, where their possible integration with product development (PD) reference models......Although dual innovation projects, defined in this article as the concurrent development of products and technologies, often occur in industry, these are only scarcely supported methodologically. Limited research has been done about dual innovation projects and their inherent challenges (e...... was investigated. Based on the specific characteristics desired for dual innovation projects, such as integrated product development and coverage of multiple development stages, a set of selection criteria was employed to select suitable PD and TD reference models. The integration and adaptation of the selected...

Lithium-Ion Cell Charge-Control Unit Developed

Science.gov (United States)

Reid, Concha M.; Manzo, Michelle A.; Buton, Robert M.; Gemeiner, Russel

2005-01-01

A lithium-ion (Li-ion) cell charge-control unit was developed as part of a Li-ion cell verification program. This unit manages the complex charging scheme that is required when Li-ion cells are charged in series. It enables researchers to test cells together as a pack, while allowing each cell to charge individually. This allows the inherent cell-to-cell variations to be addressed on a series string of cells and reduces test costs substantially in comparison to individual cell testing.

Against the odds: experiences of nurse leaders in Clinical Development Units (Nursing) in Australia.

Science.gov (United States)

Atsalos, Christine; O'Brien, Louise; Jackson, Debra

2007-06-01

This paper is a report of a longitudinal study to develop an understanding of the phenomena of Clinical Development Unit (Nursing) leadership by exploring the experiences of the nurse leaders of nine Australian units as they attempted to develop their existing wards or units into recognized centres of nursing excellence. The concept of Clinical Development Unit (Nursing) in Australia originated in the British Nursing Development Unit movement, which has been widely credited with introducing innovative approaches to developing nurses and nursing. A network of nine Clinical Development Units (Nursing) was set up in a suburban area health service in Australia. The aim was to develop existing wards or units into centres of excellence by disseminating a new vision for Australian nurses that was based on the pioneering work of the British Nursing Development Unit movement. Principles of Heideggerian hermeneutic phenomenology provided a framework for the study. Nine Clinical Development Unit (Nursing) leaders participated in qualitative interviews from 1998 to 2002. These interviews were transcribed into text and thematically analysed. Despite attempts to implement a variety of measures to nurture these Clinical Development Units (Nursing) until they had become well established, the new Clinical Development Unit (Nursing) leaders were unable to maintain the Clinical Development Unit (Nursing) vision with which they had been entrusted. This paper discusses their reactions to the problems they faced and the new understandings they developed of their Clinical Development Unit (Nursing) role over time. The findings illuminate the difficulties involved in maintaining the commitment of all levels of staff and management when attempting to introduce new nursing projects.

Classifying Floating Potential Measurement Unit Data Products as Science Data

Science.gov (United States)

Coffey, Victoria; Minow, Joseph

2015-01-01

We are Co-Investigators for the Floating Potential Measurement Unit (FPMU) on the International Space Station (ISS) and members of the FPMU operations and data analysis team. We are providing this memo for the purpose of classifying raw and processed FPMU data products and ancillary data as NASA science data with unrestricted, public availability in order to best support science uses of the data.

Innovation in Product Development: Notes for course 41629

DEFF Research Database (Denmark)

McAloone, Timothy Charles; Tan, Adrian

2003-01-01

The course on Innovatino in Product Development attempts to identify and understand the nature of innovation and product development and their important factors. The course takes both a theoretical and a practical approach and employs a mix of lectures, project work and group discussion. Format...... insight. Course content The following aspects of innovation in product development are considered: - Humans and products - Needs and products - Product life - Teams creating products - Products creating business - Product development models - Organising product development - Product development tools...... - The future of product development...

Development of Water Quality Modeling in the United States

Science.gov (United States)

This presentation describes historical trends in water quality model development in the United States, reviews current efforts, and projects promising future directions. Water quality modeling has a relatively long history in the United States. While its origins lie in the work...

Barriers towards integrated product development

DEFF Research Database (Denmark)

Sommer, Anita Friis; Dukovska-Popovska, Iskra; Steger-Jensen, Kenn

2014-01-01

The basis for product development in many large industrial companies is a traditional project management method positing non-overlapping phases, independent activities, and a dedicated project team. Research findings indicate that integrated product development methods increase performance compared...

Low Energy Technology. A Unit of Instruction on Energy Conservation in Field Crop Production.

Science.gov (United States)

Davis, George; Scanlon, Dennis C.

This unit of instruction on energy conservation in field crop production was designed for use by agribusiness and natural resources teachers in Florida high schools and by agricultural extension agents as they work with adults and students. It is one of a series of 11 instructional units (see note) written to help teachers and agents to educate…

Service-oriented product development strategies

DEFF Research Database (Denmark)

Tan, Adrian Ronald

Manufacturing companies have traditionally focused their efforts on designing, developing and producing physical products for the market. Today, global competition, outsourcing and legislation commend that companies take greater responsibility of their products. This is driving some manufacturers...... to shift their business strategies from selling products (e.g. photocopying machines) to the provision of services (e.g. document services). Instead of the product itself, the activity and knowledge associated with the use of the product is perceived to be of more value to customers. In the research...... community, service-oriented approaches that embrace this change of business focus from individual products to total integrated customer solutions are termed Product/Service-Systems (PSS). The research in this thesis addresses the systematic design and development of PSS solutions in manufacturing firms...

The water footprint of animal products : The meat crisis: Developing more sustainable and ethical production and consumption

NARCIS (Netherlands)

Hoekstra, Arjen Y.; D'Silva, Joyce; Webster, John

2017-01-01

Meat and dairy production and consumption are in crisis. Globally, 70 billion farm animals are used for food production every year. It is well accepted that livestock production is a major contributor to greenhouse gas emissions. The Food and Agriculture Organization of the United Nations (FAO)

Sectoral productivity in the United States : Recent developments and the role of IT

NARCIS (Netherlands)

Corrado, Carol; Lengermann, Paul; Bartelsman, Eric J.; Beaulieu, J. Joseph

2009-01-01

As the step-up in U.S. productivity growth in the mid-1990s became evident, research on productivity surged. Initially, the new work concentrated on estimating the contribution of information technology (IT) to the productivity pickup, with similar results obtained using industry-level or broad

Rangeland livestock production: Developing the concept of sustainability on the Santa Rita Experimental Range

Science.gov (United States)

George B. Ruyle

2003-01-01

The Santa Rita Experimental Range (SRER) was established in 1903 at the behest of concerned stockmen and researchers as the first facility in the United States set aside to study range livestock production. At the time, severe overgrazing of the public domain had seriously reduced carrying capacities of Southwestern rangelands. Researchers on the SRER developed and...

Evolving Product Information in Aligning Product Development Decisions across Disciplines

NARCIS (Netherlands)

Oude Luttikhuis, Ellen; de Lange, Jos; Lutters, Diederick; ten Klooster, Roland

2015-01-01

Today's product development is fragmented across various disciplines all with their own fields of expertise. Maintaining overview in consequences and implications of decisions is difficult, since many stakeholders are involved. To optimise the product development, many methods are developed based on

Development of Portable Flow-Through Electrochemical Sanitizing Unit to Generate Near Neutral Electrolyzed Water.

Science.gov (United States)

Zhang, Jufang; Yang, Hongshun; Chan, Joel Zhi Yang

2018-03-01

We developed a portable flow-through, electrochemical sanitizing unit to produce near neutral pH electrolyzed water (producing NEW). Two methods of redirecting cathode yields back to the anode chamber and redirecting anode yields the cathode chamber were used. The NEW yields were evaluated, including: free available chlorine (FAC), oxidation-reduction potential (ORP), and pH. The performances of 2 electrodes (RuO 2 -IrO 2 /TiO 2 and IrO 2 -Ta 2 O 5 /TiO 2 ) were investigated. The unit produced NEW at pH 6.46 to 7.17, an ORP of 805.5 to 895.8 mV, and FAC of 3.7 to 82.0 mg/L. The NEW produced by redirecting cathode yields had stronger bactericidal effects than the NEW produced by redirecting anode yields or NEW produced by mixing the commercial unit's anode and cathode product (P portable flow-through, NEW-producing unit has great potential in a wide range of applications, such as organic farm, households, and small food industries. The examined sanitizing treatments showed effective control of Escherichia coli O157:H7 and Listeria monocytogenes. © 2018 Institute of Food Technologists®.

Integrated product development: Competencies meet and products arise

DEFF Research Database (Denmark)

Jensen, Birger Boutrup; Stacey, Julia

2000-01-01

and process competencies throughout the whole development process. Of course, this is easier said than done but integrating various competencies into the product development prepares the ground for a better balance and consequently more products. Databases, for instance are a good example of a tool that can...... the development process and diminish the risk of inventing sliced bread once again. Furthermore the databases may be used as a foundation for a more effective and frictionless communication across departments. The project has its starting point in case studies of three Danish food companies. A research group...

Advanced fuel cell development in the United States

International Nuclear Information System (INIS)

Ackerman, J.P.

1984-01-01

Both molten carbonate and solid oxide fuel cells are being developed in the United States to complement and/or supplant phosphoric acid cells for commercial and utility use. This paper described the two technologies and the programs for their development

Designer-made meat and dairy products: Consumer-led product development

DEFF Research Database (Denmark)

Grunert, Klaus G.; Valli, Carlotta

2001-01-01

targeting these segments were derived and tested with consumers from these segments. Results show considerable potential for the development of food products which are differentiated in a consumer-based way. The paper closes with a step-model for consumer-led product development adapted to the current state...... of branding and differentiation in the product category.......Consumers differ in the kind of qualities they expect from food products, and they also differ in the way they infer quality from the product information available. Nevertheless, much product innovation in the food sector is still not geared towards specific consumer segments. This is especially...

Designer made meat and dairy products: Consumer-led product development

DEFF Research Database (Denmark)

Grunert, Klaus G.; Valli, Carlotta

targeting these segments were derived and tested with consumers from these segments. Results show considerable potential for the development of food products which are differentiated in a consumer-based way. The paper closes with a step-model for consumer-led product development adapted to the current state...... of branding and differentiation in the product category.......Consumers differ in the kind of qualities they expect from food products, and they also differ in the way they infer quality from the product information available. Nevertheless, much product innovation in the food sector is still not geared towards specific consumer segments. This is especially...

Global Dental Research Productivity and Its Association With Human Development, Gross National Income, and Political Stability.

Science.gov (United States)

Allareddy, Veerasathpurush; Allareddy, Veeratrishul; Rampa, Sankeerth; Nalliah, Romesh P; Elangovan, Satheesh

2015-09-01

The objective of this study is to examine the associations between country level factors (such as human development, economic productivity, and political stability) and their dental research productivity. This study is a cross-sectional analysis of bibliometric data from Scopus search engine. Human Development Index (HDI), Gross National Income per capita (GNI), and Failed State Index measures were the independent variables. Outcomes were "Total number of publications (articles or articles in press) in the field of dentistry" and "Total number of publications in the field of dentistry per million population." Non-parametric tests were used to examine the association between the independent and outcome variables. During the year 2013, a total of 11,952 dental research articles were published across the world. The top 5 publishing countries were United States, Brazil, India, Japan, and United Kingdom. "Very High" HDI countries had significantly higher number of total dental research articles and dental research articles per million population when compared to the "High HDI," "Medium HDI," and "Low HDI" countries (p < 0.0001). There was a significant linear relationship between the GNI quartile income levels and outcome metrics (p ≤ 0.007). Countries which were highly politically stable were associated with significantly higher dental research productivity (p < 0.0001). There appears to be a regional concentration of articles with just five countries contributing to over 50% of all articles. The human development and economic development of a country are linearly correlated with dental research productivity. Dental research productivity also increases with increasing political stability of a country. Copyright © 2015 Elsevier Inc. All rights reserved.

Microfouling assessment and its control in a heavy water production unit

International Nuclear Information System (INIS)

Rajesh Kumar; Subba Rao, T.

2015-01-01

The water treatment plant (WTP) of a heavy water production unit was extensively fouled by microorganisms. On-site investigations showed severe algal and bacterial growth in the various units of WTP and very dense microbial fouling in the vacuum degasser (VD) unit. Digital and microscopic images showed that the microfouling problem was primarily due to a slime bacterium and a fungus. Microbiological analysis showed a bacterial count of ∼10 5 cfu ml -1 in the various sections of WTP. The slime/biofilm scrapings had very high bacterial population (>10 9 cfu cm -2 ). High organic carbon values in the system (5.0 to 19.5 ppm) had supported microbial growth in WTP and augmented resin fouling. Chlorination was inadequate in controlling microfouling, consequently chlorine dioxide was tested and found to be a better biocide. A 2.0% sodium omadine solution had completely inhibited the fouling fungus. (author)

The Development Strategies of Electronic Records: United States, Canada, United Kingdom and Australia as Examples

Directory of Open Access Journals (Sweden)

Chiao-Min Lin

2004-09-01

Full Text Available The development of electronic records have been an indicator of modern government all over the world. The format of public records of government agencies have been gradually transformed to digitalform. How to manage the life cycle of electronic records have became an important issue. In this paper, the development strategies in electronic records of the United States, Canada, United Kingdom and Australia are taken as examples to explain their state-of-the-art. Several suggestions are proposed as the reference for Taiwan’s government. [Article content in Chinese

Development of Wolsong Unit 2 Containment Analysis Model

Energy Technology Data Exchange (ETDEWEB)

Hoon, Choi [Korea Hydro and Nuclear Power Co., Ltd., Daejeon (Korea, Republic of); Jin, Ko Bong; Chan, Park Young [Hanbat National Univ., Daejeon (Korea, Republic of)

2014-05-15

To be prepared for the full scope safety analysis of Wolsong unit 2 with modified fuel, input decks for the various objectives, which can be read by GOTHIC 7.2b(QA), are developed and tested for the steady state simulation. A detailed nodalization of 39 control volumes and 92 flow paths is constructed to determine the differential pressure across internal walls or hydrogen concentration and distribution inside containment. A lumped model with 15 control volumes and 74 flow paths has also been developed to reduce the computer run time for the assessments in which the analysis results are not sensitive to detailed thermal hydraulic distribution inside containment such as peak pressure, pressure dependent signal and radionuclide release. The input data files provide simplified representations of the geometric layout of the containment building (volumes, dimensions, flow paths, doors, panels, etc.) and the performance characteristics of the various containment subsystems. The parameter values are based on best estimate or design values for that parameter. The analysis values are determined by conservatism depending on the analysis objective and may be different for various analysis objectives. Basic input decks of Wolsong unit 2 were developed for the various analysis purposes with GOTHIC 7.2b(QA). Depend on the analysis objective, two types of models are prepared. Detailed model models each confined room in the containment as a separate node. All of the geometric data are based on the drawings of Wolsong unit 2. Developed containment models are simulating the steady state well to the designated initial condition. These base models will be used for Wolsong unit 2 in case of safety analysis of full scope is needed.

Productivity Effects of United States Multinational Enterprises : The Roles of Market Orientation and Regional Integration

NARCIS (Netherlands)

Smeets, Roger; Wei, Yingqi

2010-01-01

Smeets R. and Wei Y. Productivity effects of United States multinational enterprises: the roles of market orientation and regional integration, Regional Studies. This paper considers the role of market orientation and regional integration in foreign direct investment (FDI) productivity effects.

Ecological quality of production: accounting approach on sustainable development

Directory of Open Access Journals (Sweden)

N.P. Syroid

2016-12-01

Full Text Available The specific weight of resource and power consuming technologies that is typical for Ukrainian economy, the absence of effective legal, administrative and economic mechanisms of management of nature and the low level of ecological society consciousness have led to the significant deterioration of environment state in Ukraine, excessive pollution of waters, air, and soil, accumulation of a large number of waste products. Besides, the produce as a result of such enterprises’ production affects consumers’ health badly. This causes the need to develop theory and methodology of production ecological quality accounting. The problem of quality is the most important factor of increasing of life level, economic, social and ecological security in market economy. This, the current research aims to formulate the essence of concept “ecological quality of production” The research determines that ecological quality is characterized by the following main 6 aspects: social, technical, legal, economic, aesthetic and ecological. If one of these six aspects does not work, we cannot speak about ecological quality of a certain commodity. Many various factors influence upon the level of ecological quality of products and services. According to their contents and directions, they can be united into the following main 6 groups: technical, organizational, economic and social, ecological and aesthetic and legal. The article determines the directions of production ecological quality increasing.

Comparison of production-phase environmental impact metrics derived at the farm- and national-scale for United States agricultural commodities

International Nuclear Information System (INIS)

Costello, Christine; Xue, Xiaobo; Howarth, Robert W

2015-01-01

Agricultural production is critical for human survival and simultaneously contributes to ecosystem degradation. There is a need for transparent, rapid methods for evaluating the environmental impacts of agricultural production at the system-level in order to develop sustainable food supplies. We have developed a method for estimating the greenhouse gas (GHG), land use and reactive nitrogen inputs associated with the agricultural production phase of major crop and livestock commodities produced in the United States (US). Materials flow analysis (MFA) and life cycle assessment (LCA) techniques were applied to national inventory datasets. The net anthropogenic nitrogen inputs (NANI) toolbox served as the primary accounting tool for LCA and MFA. NANI was updated to create links between nitrogen fertilizer and nitrogen fixation associated with feed crops and animal food commodities. Results for the functional units kilogram (kg) of product and kg of protein for 2002 data fall within ranges of published LCA results from farm-scale studies across most metrics. Exceptions include eutrophication potential for milk and GHGs for chicken and eggs, these exceptions arise due to differing methods and boundary assumptions; suggestions for increasing agreement are identified. Land use for livestock commodities are generally higher than reported by other LCA studies due to the inclusion of all land identified as pasture or grazing land in the US in this study and given that most of the estimates from other LCAs were completed in Europe where land is less abundant. The method provides a view of the entire US agricultural system and could be applied to any year using publically available data. Additionally, utilizing a top-down approach reduces data collection and processing time making it possible to develop environmental inventory metrics rapidly for system-level decision-making. (letter)

Linking quality goals and product development competences

DEFF Research Database (Denmark)

Olsen, Johanne Rønnow; Harmsen, Hanne; Friis, Alan

2008-01-01

Quality is a main determinant of consumer food choice. Product development is accordingly a key activity for companies, because it generates the products on the quality of which consumer choices are based. In this respect, product development managers have a focal role, as their personal quality......, including reversed laddering sessions with 18 product development managers. Discrepancies between managerial and consumer quality goals are uncovered. Furthermore, the results point to two general dilemmas faced by product development managers in relation to quality; an external stakeholder dilemma...... orientation influence the way product development is performed. The aim of this paper is to investigate managerial quality goals and how these may be linked to product development competences, which has not previously been studied. The study draws on an empirical, qualitative study in the Danish food industry...

75 FR 52378 - International Product Change-United States Postal Service Inbound Market-Dominant Multi-Service...

Science.gov (United States)

2010-08-25

... POSTAL SERVICE International Product Change--United States Postal Service Inbound Market-Dominant... Inbound Market-Dominant Multi- Service Agreements to the Market-Dominant Products List pursuant to 39 U.S... the Postal Regulatory Commission to Add Market-Dominant Multi-Service Agreements with Foreign Postal...

Commander’s Handbook for Unit Leader Development

Science.gov (United States)

2007-07-02

Transforming Organizations: Growing Leaders for Tomorrow. Mahwah, NJ: Lawrence Erlbaum Associates. Kolb , D. (1984). Experiential learning : Experiences...development tools, job aides, or other on-the-job leader development interventions. Implicitly, the handbook employs adult learning theory to engage...most effective and efficient methods of leader development for a unit environment. Principles of adult learning theory were then applied to

FAMILY UNIT PRODUCTION AS ALTERNATIVE TO IMPROVE THE ETHNIC YAQUI FOOD SECURITY IN VICAM, SONORA, MÉXICO

Directory of Open Access Journals (Sweden)

A. Guillermo Ramírez-García

2015-07-01

Full Text Available The family production unit is a strategy that has Ethnicity Yaqui population for food production at low cost and thus achieve the food sovereignty. This work was carried out in Vicam, where 41 surveys were applied to household which were selected through cooperation of their occupants. The main results indicate that food sovereignty concept is unknow from daily life population in the region; partly, because food production in the region is reduced; besides weather, market and social factors that prevent it. In addition, the family production unit is not a common element among families. However, there are some homes with some spaces, although small ones, for food production and families obtain, in certain seasons, some grains and some vegetables.

Development of fission Mo-99 production technology

International Nuclear Information System (INIS)

Park, Jin Ho; Choung, W. M.; Lee, K. I. and others

2000-05-01

Fission Mo-99 is the only parent nuclide of Tc-99m, an extremely useful tool for mdeical diagnosis, with an estimated usage of greater than 80% of nuclear medicine applicatons. HEU and LEU targets to optimize in HANARO irradiation condition suggested and designed for domestic production of fission Mo-99. The optimum process conditions are established in each unit process to meet quality requirements of fission Mo-99 products, and the results of performance test in combined process show Mo separation and purification yield of the above 97%. The concept of Tc generator production process is established, and the result of performance test show Tc production yield of 98.4% in Tc generator procuction process. The drafts is prepared for cooperation of technical cooperation and business investment with foreign country. Evaluation on economic feasibility is accompanied for fission Mo-99 and Tc-99m generator production

Development of fission Mo-99 production technology

Energy Technology Data Exchange (ETDEWEB)

Park, Jin Ho; Choung, W. M.; Lee, K. I. and others

2000-05-01

Fission Mo-99 is the only parent nuclide of Tc-99m, an extremely useful tool for mdeical diagnosis, with an estimated usage of greater than 80% of nuclear medicine applicatons. HEU and LEU targets to optimize in HANARO irradiation condition suggested and designed for domestic production of fission Mo-99. The optimum process conditions are established in each unit process to meet quality requirements of fission Mo-99 products, and the results of performance test in combined process show Mo separation and purification yield of the above 97%. The concept of Tc generator production process is established, and the result of performance test show Tc production yield of 98.4% in Tc generator procuction process. The drafts is prepared for cooperation of technical cooperation and business investment with foreign country. Evaluation on economic feasibility is accompanied for fission Mo-99 and Tc-99m generator production.

Development of Production Systems

DEFF Research Database (Denmark)

Christiansen, Thomas Bøhm

1997-01-01

This paper presents the initial considerations related to a Ph.D. study initiated at IPV, DTU in February 1997, concerning the research subject "Development of Production Systems". The content and aim of this paper is to 1) to introduce the study by......This paper presents the initial considerations related to a Ph.D. study initiated at IPV, DTU in February 1997, concerning the research subject "Development of Production Systems". The content and aim of this paper is to 1) to introduce the study by...

Students’ Socio-cultural Competence Development, Using English and Russian Phraseological Units

Directory of Open Access Journals (Sweden)

Umit I. Kopzhasarova

2013-01-01

Full Text Available The article deals with the problem of socio-cultural competence development on the basis of using English and Russian phraseological units. The authors specify the essence of the socio-cultural competence, define socio-cultural component of foreign language teaching. The authors justify their viewpoint that phraseological units, being the most valuable source of cultural information, exposing background knowledge and culture specific vocabulary, are the effective means of socio-cultural competence development. The set of exercises on socio-cultural competence development on the material of English and Russian phraseological units, developed by authors, include language and speech tasks; tasks based on project and creative research activity methods, which are the basis of development of the main socio-cultural skills that are necessary in intercultural communication

Entropy dynamics in cone production of longleaf pine forests in the southeastern United States

Science.gov (United States)

Xiongwen Chen; Dale G. Brockway; Qinfeng Guo

2016-01-01

Sporadic temporal patterns of seed production are a challenge for the regeneration and restoration of longleaf pine, which is a keystone component of an endangered ecosystem in the southeastern United States. In this study, long-term data for longleaf pine cone production, collected at six sites across the southeastern region, was examined from the perspective of...

Development of certified environmental management in hospital and outpatient haemodialysis units.

Science.gov (United States)

García Vicente, Sergio; Morales Suárez-Varela, María; Martí Monrós, Anna; Llopis González, Agustín

2015-01-01

The environmental impact of haemodialysis is very high. Institutional activity in this sense is important, even in the production of references. Voluntary environmental management systems (EMS), environmental management and auditing systems (EMAS) and the International Organization for Standardization standards (ISO 14001) are important tools for environmental protection, together with legislation, taxation and tax benefits. To determine the degree of implementation of EMS in hospital units and outpatient haemodialysis in the Spanish National Health System to provide a group of reference centres in environmental management in this healthcare activity. Development of a list by autonomous communities showing hospital and outpatient dialysis units using an EMAS and/or ISO 14001 in 2012-2013. The sources of information were the Spanish National Catalogue of Hospitals, Spanish Registry of Healthcare Certification and Accreditation, European and regional EMAS records, world ISO registrations, dialysis centre lists from scientific societies and patients, responses from accredited entities in Spain for environmental certification and the institutional website of each haemodialysis centre identified. Of the 210 hospitals with a dialysis unit, 53 (25%) have the ISO 14001 and 15 of these also have an EMAS). This constitutes 30% of all hospital dialysis chairs in Spain: 1,291 (of 4,298). Only 11 outpatient clinics are recorded, all with the ISO 14001. There is no official documentation of the implementation of EMS in dialysis units. Making this list provides an approach to the situation, with special reference to haemodialysis because of its significant environmental impact. Copyright © 2015 Sociedad Española de Nefrología. Published by Elsevier España, S.L.U. All rights reserved.

Impact of Expanded North Slope of Alaska Crude Oil Production on Crude Oil Flows in the Contiguous United States

Energy Technology Data Exchange (ETDEWEB)

DeRosa, Sean E. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Flanagan, Tatiana Paz [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2017-05-01

The National Transportation Fuels Model was used to simulate a hypothetical increase in North Slope of Alaska crude oil production. The results show that the magnitude of production utilized depends in part on the ability of crude oil and refined products infrastructure in the contiguous United States to absorb and adjust to the additional supply. Decisions about expanding North Slope production can use the National Transportation Fuels Model take into account the effects on crude oil flows in the contiguous United States.

9 CFR 590.900 - Requirements for importation of egg products or restricted eggs into the United States.

Science.gov (United States)

2010-01-01

... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Requirements for importation of egg products or restricted eggs into the United States. 590.900 Section 590.900 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE EGG PRODUCTS INSPECTION INSPECTION OF...

Managing Virtual Product Development team: A Review

Directory of Open Access Journals (Sweden)

Amir Mohammad Colabi

2014-05-01

Full Text Available Although there are many potential benefits associated with the use of virtual product development teams, exploiting these benefits requires an appropriate management. Managing virtual product development team is a critical issue as many of these teams fail to accomplish their goals. Review of previous literature shows that body of knowledge in managing virtual product development teams is fragmented and inconsistent. The main objective of this paper is to categorize the previous research on the subject of virtual product development team management in order to integrate the research into a thematic model and to enable recommendations for future research. So, this study reviews and summarizes empirical research in the field, also conceptual and qualitative papers, experiences, reports and explorative case studies. Results show that there are three fields of research in this area, including: Virtual production and Virtual team in Product Development, Managing virtual team in R&D[1] and product development, Managing global virtual product development teams. In order to organize previous studies in this area, a thematic map is proposed which shows the structure and sequence of research. Finally, a comprehensive discussion on the future directions in this field is proposed.

The development of Environmental Productivity: the Case of Danish Energy Plants

Directory of Open Access Journals (Sweden)

Geraldine Henningsen

2015-06-01

Full Text Available The Danish “Klima 2020” plan sets an ambitious target for the complete phasing-out of fossil fuels by 2050. The Danish energy sector currently accounts for 40% of national CO 2 emissions. Based on an extended Farrell input distance function that accounts for CO 2 as an undesirable output, we estimate the environmental productivity of individual generator units based on a panel data set for the period 1998 to 2011 that includes virtually all fuel-fired generator units in Denmark. We further decompose total environmental energy conversion productivity into conversion efficiency, best conversion practice ratio, and conversion scale efficiency and use a global Malmquist index to calculate the yearly changes. By applying time series clustering, we can identify high, middle, and low performance groups of generator units in a dynamic setting. Our results indicate that the sectoral productivity only slightly increased over the fourteen years. Furthermore, we find that there is no overall high achiever group, but that the ranking, although time consistent, varies between the different productivity measures. However, we identify steam turbines and combustion engines for combined heat and power production as potential high performers, while combustion engines that only produce electricity are clearly low performers.

Research on the pyrolysis of hardwood in an entrained bed process development unit

Energy Technology Data Exchange (ETDEWEB)

Kovac, R.J.; Gorton, C.W.; Knight, J.A.; Newman, C.J.; O' Neil, D.J. (Georgia Inst. of Tech., Atlanta, GA (United States). Research Inst.)

1991-08-01

An atmospheric flash pyrolysis process, the Georgia Tech Entrained Flow Pyrolysis Process, for the production of liquid biofuels from oak hardwood is described. The development of the process began with bench-scale studies and a conceptual design in the 1978--1981 timeframe. Its development and successful demonstration through research on the pyrolysis of hardwood in an entrained bed process development unit (PDU), in the period of 1982--1989, is presented. Oil yields (dry basis) up to 60% were achieved in the 1.5 ton-per-day PDU, far exceeding the initial target/forecast of 40% oil yields. Experimental data, based on over forty runs under steady-state conditions, supported by material and energy balances of near-100% closures, have been used to establish a process model which indicates that oil yields well in excess of 60% (dry basis) can be achieved in a commercial reactor. Experimental results demonstrate a gross product thermal efficiency of 94% and a net product thermal efficiency of 72% or more; the highest values yet achieved with a large-scale biomass liquefaction process. A conceptual manufacturing process and an economic analysis for liquid biofuel production at 60% oil yield from a 200-TPD commercial plant is reported. The plant appears to be profitable at contemporary fuel costs of $21/barrel oil-equivalent. Total capital investment is estimated at under $2.5 million. A rate-of-return on investment of 39.4% and a pay-out period of 2.1 years has been estimated. The manufacturing cost of the combustible pyrolysis oil is $2.70 per gigajoule. 20 figs., 87 tabs.

The joint industry development of a recommended practice for the site specific assessment of mobile jackup units

International Nuclear Information System (INIS)

Jones, D.E.; Bennett, W.T.; Hoyle, M.J.R.

1993-01-01

The mobile self-elevating (drilling) unit, or jack-up, has been central to the exploration and development of offshore oil and gas reserves. In recent years there has been an increased desire to benefit from the potential economics of using these units in longer term production roles either in association with a fixed platform or as a stand-alone facility. However, until recently there had been no concerted effort to develop a consistent and commonly accepted standard for general industry use in site specific assessment of jack-ups. This paper describes the background and work carried out to develop such a standard. The project is nearing completion and has resulted in the publication of a Guideline document. A Recommended Practice and associated Commentary are (at the time of writing) in the final stage of drafting for release to the project sponsors for trial and comment prior to issuing the first Edition early in 1994

EVOLUTION AND STRATEGY OF POULTRY PRODUCTION DEVELOPMENT IN THE REPUBLIC OF MOLDOVA

Directory of Open Access Journals (Sweden)

Zinaida BARBACARU (Pistol,

2013-02-01

Full Text Available Poultry farming is a strategic branch of the livestock sector with high potential recovery in a short period of time. Today poultry farming in our country is developed in three basic systems: industrial-intensive, household-intensive and household-extensive, more importance and priority being given to intensive-industry system, the share of which in the production of eggs and meat consumption, is 50-60% of the total volume of poultry production. Intensive-industrial system is characteristic of poultry factories using biological material with valuable productive potential, are equipped with modern technological equipment, which ensures increasing the rate of production and delivery of eggs and meat, poultry achieve high production, reducing costs per unit production. In this system annually will produce 25-30 thousand tons of meat, 280-350 million eggs for consumption, including 100-150 million eggs for export. The household-intensive system is specific for small and medium farms is characteristic of which optimal dimension is considered of 1-10 thousand laying hens or up to 20-40 thousand chickens bred for meat. Household-extensive system is specific for individual poultry farms; the production obtained was mainly used to ensure family needs.

Accurate costs of blood transfusion: a microcosting of administering blood products in the United Kingdom National Health Service.

Science.gov (United States)

Stokes, Elizabeth A; Wordsworth, Sarah; Staves, Julie; Mundy, Nicola; Skelly, Jane; Radford, Kelly; Stanworth, Simon J

2018-04-01

In an environment of limited health care resources, it is crucial for health care systems which provide blood transfusion to have accurate and comprehensive information on the costs of transfusion, incorporating not only the costs of blood products, but also their administration. Unfortunately, in many countries accurate costs for administering blood are not available. Our study aimed to generate comprehensive estimates of the costs of administering transfusions for the UK National Health Service. A detailed microcosting study was used to cost two key inputs into transfusion: transfusion laboratory and nursing inputs. For each input, data collection forms were developed to capture staff time, equipment, and consumables associated with each step in the transfusion process. Costing results were combined with costs of blood product wastage to calculate the cost per unit transfused, separately for different blood products. Data were collected in 2014/15 British pounds and converted to US dollars. A total of 438 data collection forms were completed by 74 staff. The cost of administering blood was $71 (£49) per unit for red blood cells, $84 (£58) for platelets, $55 (£38) for fresh-frozen plasma, and $72 (£49) for cryoprecipitate. Blood administration costs add substantially to the costs of the blood products themselves. These are frequently incurred costs; applying estimates to the blood components supplied to UK hospitals in 2015, the annual cost of blood administration, excluding blood products, exceeds $175 (£120) million. These results provide more accurate estimates of the total costs of transfusion than those previously available. © 2018 AABB.

High-Resolution Water Footprints of Production of the United States

Science.gov (United States)

Marston, Landon; Ao, Yufei; Konar, Megan; Mekonnen, Mesfin M.; Hoekstra, Arjen Y.

2018-03-01

The United States is the largest producer of goods and services in the world. Rainfall, surface water supplies, and groundwater aquifers represent a fundamental input to economic production. Despite the importance of water resources to economic activity, we do not have consistent information on water use for specific locations and economic sectors. A national, spatially detailed database of water use by sector would provide insight into U.S. utilization and dependence on water resources for economic production. To this end, we calculate the water footprint of over 500 food, energy, mining, services, and manufacturing industries and goods produced in the United States. To do this, we employ a data intensive approach that integrates water footprint and input-output techniques into a novel methodological framework. This approach enables us to present the most detailed and comprehensive water footprint analysis of any country to date. This study broadly contributes to our understanding of water in the U.S. economy, enables supply chain managers to assess direct and indirect water dependencies, and provides opportunities to reduce water use through benchmarking. In fact, we find that 94% of U.S. industries could reduce their total water footprint more by sourcing from more water-efficient suppliers in their supply chain than they could by converting their own operations to be more water-efficient.

Wood Products Other Building Materials Used in New Residential Construction in the United States

Science.gov (United States)

David B. McKeever; Joe Elling

2015-01-01

On average, new residential construction accounts for about one-third of all wood products consumed in the United States annually. During periods of robust housing activity, 45% or more of all wood products consumed are for new single-family and multifamily housing. This can fall to as low as 20% or less during times of economic recession. Unfortunately, 2012 was not...

Knowledge Perspectives of New Product Development A Comparative Approach

CERN Document Server

Carayannis, Elias; Dossani, Rafiq

2012-01-01

New Product Development (NPD) is about the ideation, formulation, and implementation of new and superior solutions in the market. Beyond the obvious need for organizations to innovate in order to compete, embedded in any NPD program are knowledge, technological expertise, and the social networks that convert these capabilities into offerings that create value at every level—for customers, industries, communities, and regions.    This volume provides an array of knowledge perspective in NPD across multiple levels of analysis and geographic regions, including Europe, the United States, China, Japan, and India, to explore the dynamics of NPD in today’s global environment.   Presenting case studies from such industries as ICT services, semiconductors, software development, bio-technology, higher education, and even safety for children’s toys, and drawing from a variety of theoretical perspectives, including technology and knowledge management, sociology, economic geography, and organizational behavior, ...

Co-ordinating Product Developing Activities

DEFF Research Database (Denmark)

Terkelsen, Søren Bendix

1996-01-01

The paper contains a presentation of research methods to be used in case studies in product development and a presentation on how to deal with Design Co-ordination according to litterature......The paper contains a presentation of research methods to be used in case studies in product development and a presentation on how to deal with Design Co-ordination according to litterature...

Success rates for product development strategies in new drug development.

Science.gov (United States)

Dahlin, E; Nelson, G M; Haynes, M; Sargeant, F

2016-04-01

While research has examined the likelihood that drugs progress across phases of clinical trials, no research to date has examined the types of product development strategies that are the most likely to be successful in clinical trials. This research seeks to identify the strategies that are most likely to reach the market-those generated using a novel product development strategy or strategies that combine a company's expertise with both drugs and indications, which we call combined experience strategies. We evaluate the success of product development strategies in the drug development process for a sample of 2562 clinical trials completed by 406 US pharmaceutical companies. To identify product development strategies, we coded each clinical trial according to whether it consisted of an indication or a drug that was new to the firm. Accordingly, a clinical trial that consists of both an indication and a drug that were both new to the firm represents a novel product development strategy; indication experience is a product development strategy that consists of an indication that a firm had tested previously in a clinical trial, but with a drug that was new to the firm; drug experience is a product development strategy that consists of a drug that the firm had prior experience testing in clinical trials, but with an indication that was new to the firm; combined experience consists of both a drug and an indication that the firm had experience testing in clinical trials. Success rates for product development strategies across clinical phases were calculated for the clinical trials in our sample. Combined experience strategies had the highest success rate. More than three and a half percent (0·036) of the trials that combined experience with drugs and indications eventually reached the market. The next most successful strategy is drug experience (0·025) with novel strategies trailing closely (0·024). Indication experience strategies are the least successful (0·008

Green product development : What does the country product space imply?

NARCIS (Netherlands)

Fraccascia, Luca; Giannoccaro, Ilaria; Albino, Vito

This paper contributes to green product development by identifying the green products with the highest potential for growth in a country. To address our aim, we use the concept of product proximity and product space and, borrowing from the results of recent studies on complexity economics, we

Preliminary estimates of the quantities of rare-earth elements contained in selected products and in imports of semimanufactured products to the United States, 2010

Science.gov (United States)

Bleiwas, Donald I.; Gambogi, Joseph

2013-01-01

Rare-earth elements (REEs) are contained in a wide range of products of economic and strategic importance to the Nation. The REEs may or may not represent a significant component of that product by mass, value, or volume; however, in many cases, the embedded REEs are critical for the device’s function. Domestic sources of primary supply and the manufacturing facilities to produce products are inadequate to meet U.S. requirements; therefore, a significant percentage of the supply of REEs and the products that contain them are imported to the United States. In 2011, mines in China produced roughly 97 percent of the world’s supply of REEs, and the country’s production of these elements will likely dominate global supply until at least 2020. Preliminary estimates of the types and amount of rare-earth elements, reported as oxides, in semimanufactured form and the amounts used for electric vehicle batteries, catalytic converters, computers, and other applications were developed to provide a perspective on the Nation’s use of these elements. The amount of rare-earth metals recovered from recycling, remanufacturing, and reuse is negligible when the tonnage of products that contain REEs deposited in landfills and retained in storage is considered. Under favorable market conditions, the recovery of REEs from obsolete products could potentially displace a portion of the supply from primary sources.

What Happens to Integrated Product Development Models with Product/Service-System Approaches?

DEFF Research Database (Denmark)

Tan, Adrian; McAloone, Timothy Charles; Andreasen, Mogens Myrup

2006-01-01

Integrated Product Development (IPD) has traditionally focused on the development activities relating to physical technological artefacts. With the advent of business approaches for manufacturing firms based on providing customers the utility of integrated products and services – a term dubbed...... ‘product/service-systems (PSS)’ – companies need to extend their activities to include new dimensions of development. Within the paradigm of mass production and consumption, traditional product-oriented business strategies regarded physical technological artefacts (products) as the mediators of customer...... value. Value was based on the exchange of products between a providing company and a receiving customer. The more products the company could sell, the more revenue it generated. At the point of sale the ownership and responsibility of the product was transferred from company to customer. A customer...

New product development: A batik multifunctional chair

Science.gov (United States)

Indrawati, Sri; Sukmaningsih, Nias

2017-11-01

The biggest challenge facing by Batik industry in ASEAN Economic Community (AEC) era is the greater number of fashion competitors both domestically and internationally. Based on that condition, the development of new product variants by considering product performance and price is needed. This research was conducted to develop batik products with a new target market. Products that being developed is batik multifunctional chair using integrated value engineering and analytic hierarchy process methods. This research has been done in several stages, ie. Information stage, creative stage, value analysis and product prototyping. The results of this research shows that the batik multifunctional chair product criteria are aesthetic (29%), multifunctional (34%) and ergonomic (37%). There are three new product design alternatives that successfully being developed. Based on value analysis, the product design alternatives that have the highest value is alternative design 2, the value is 2,37. The production cost for this design is Rp. 500.000,-. Alternative design 2 specification are using Mahoni wood, Batik parang rusak pattern with natural coloring process, can be used as table and fit with customer's body anthropometry. Then a batik multifunctional chair prototype is developed based on the best alternative design.

How can we improve biomethane production per unit of feedstock in biogas plants?

International Nuclear Information System (INIS)

Asam, Zaki-ul-Zaman; Poulsen, Tjalfe Gorm; Nizami, Abdul-Sattar; Rafique, Rashad; Kiely, Ger; Murphy, Jerry D.

2011-01-01

Biogas production is one of the number of tools that may be used to alleviate the problems of global warming, energy security and waste management. Biogas plants can be difficult to sustain from a financial perspective. The facilities must be financially optimized through use of substrates with high biogas potential, low water content and low retention requirement. This research carried out in laboratory scale batch digesters assessed the biogas potential of energy crops (maize and grass silage) and solid manure fractions from manure separation units. The ultimate methane productivity in terms of volatile solids (VS) was determined as 330, 161, 230, 236, 361 L/kg VS from raw pig slurry, filter pressed manure fiber (FPMF), chemically precipitated manure fiber (CPMF), maize silage and grass silage respectively. Methane productivity based on mass (L/kg substrate) was significantly higher in FPMF (55 L/kg substrate), maize silage (68 L/kg substrate) and grass silage (45-124 L/kg substrate (depending on dry solids of feedstock)) as in comparison to raw pig slurry (10 L/kg substrate). The use of these materials as co-substrates with raw pig slurry will increase significantly the biomethane yield per unit feedstock in the biogas plant.

Characterization of atmospheric emissions of a radiopharmaceutical' s production unit

Energy Technology Data Exchange (ETDEWEB)

Siqueira, Gessilane M.; Barreto, Alberto A.; Maletta, Paulo G.M.; Alves, Thaís A.N., E-mail: gessilane.siqueira@cdtn.br, E-mail: aab@cdtn.br, E-mail: pgmm@cdtn.br, E-mail: aryadnenasc@gmail.com [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte - MG (Brazil)

2017-07-01

Cyclotrons are radiative facilities capable of synthesizing radioisotopes that will be used for the production of radiopharmaceuticals. The increasing use of these substances in diagnostic therapies and procedures in nuclear medicine implies the need to increase the production of radiopharmaceuticals. In this context, it is fundamental, from the point of view of environmental radioprotection, to characterize atmospheric emissions from this type of production, in order to make feasible studies of radiological impacts, especially with a view to human health and environmental preservation. It is premise that facilities must ensure the radiological safety of exposed individuals through the control of discharges into the environment. This work aims to characterize the atmospheric emissions behavior of a Radiopharmaceutical Research and Production Unit (RRPU). The emission data for the radionuclides C-11, F-18, and N-13, associated to the production of radiopharmaceuticals ({sup 18}F-FES, {sup 18}F-FDG, {sup 18}FCOL, {sup 18}F-FLT, Na{sup 18}F) during the year 2016 were analyzed. Emissions data are collected every 10 seconds from a sensor installed in the unit's exhaust system. The pre-processing of these data was done by spreadsheets (Excel®) and exported to a statistical package (Minitab16®) to characterize the behavior of these emissions. The results of this study aim to contribute: to the study of atmospheric dispersion of radionuclides in the region of interest; to evaluate the operational control measures of the investigated facility; and to evaluate the radiological impacts in the region neighboring the facility. This methodology has been used in atmospheric dispersion modeling studies in the RRPU and the results showed that the annual doses from the emissions are within the limits established by the radioprotection norms of the Brazilian National Nuclear Energy Commission. Additionally, it is believed that the information generated in this study

Gender Differences in Publication Productivity Among Academic Urologists in the United States.

Science.gov (United States)

Mayer, Erik N; Lenherr, Sara M; Hanson, Heidi A; Jessop, Terry C; Lowrance, William T

2017-05-01

To describe the publication productivity of academic urologists in the United States by gender. Gender inequality is prevalent in most surgical subspecialties, including urology. Despite small numbers of women in academic positions, differences in scholarly impact by gender are relatively unknown. We assembled a list of 1922 academic urologists (1686 men (87.7%), 236 women (12.3%)) at 124 academic institutions throughout the United States as of February 2016. Scopus and Google Scholar were queried for bibliometric data on each individual, including h-index and m-quotient. We analyzed these metrics for both genders by educational background, subspecialty, National Institutes of Health funding, and academic rank. Men had higher median h-indices than women overall (P productivity by successive rank after controlling for career duration (m-quotient). Women were more likely to choose a practice that specialized in pediatric urology or female urology/pelvic reconstructive surgery than their male counterparts (P advancement such as lack of mentorship or discriminatory policies may help pioneering female urologists as they progress in their careers. Copyright © 2017. Published by Elsevier Inc.

Managing R&D and New Product Development

NARCIS (Netherlands)

von Zedtwitz, Maximilian; Friesike, Sascha; Gassmann, Oliver; Dodgson, Mark; Gann, David M.; Phillips, Nelson

2014-01-01

This article examines the importance of R&D and new product development and explores their management. It describes three central aspects of managing R&D and new product development in firms: the product development funnel, R&D portfolio management, and R&D organization. Concepts such as the ‘fuzzy

New Product Development Based on Demand

OpenAIRE

Davis-Krook, Shelby

2015-01-01

The purpose of this thesis was to determine how to develop a new product based on demand within a target market for an international company. Specifically looking at developing a new product line in an already developed brand, Alpha Performance. The research I have conducted in the following topics may help Alpha Performance if they choose to use my findings to create a one of a kind woman’s clothing line based on the demands of the Finnish market: target market research, product demand rese...

Action Research in User-Centered Product Development

DEFF Research Database (Denmark)

Brandt, Eva

2004-01-01

Technological development and increased international competition have imposed a significant burden on the product development function of many companies. The growing complexity of products demands a larger product development team with people having various competencies. Simultaneously...... the importance of good quality, usability and customisation of products is growing, and many companies want to involve customers and users directly in the development work. Both the complexity and quality demand new ways of working that support collaboration between people with various competencies, interests...... and responsibilities both inside and outside the company. This paper reports experiences from using action research to introduce new user-centred work practices in two commercial product development projects. The interventions varied. In the first project it was found rewarding to engage customers and users...

78 FR 37584 - U.S. Steel Tubular Products, Inc., Mckeesport Tubular Operations Division, Subsidiary of United...

Science.gov (United States)

2013-06-21

... make the following certification: All workers of U.S. Steel Tubular Products, McKeesport Tubular... Products, Inc., Mckeesport Tubular Operations Division, Subsidiary of United States Steel Corporation, Mckeesport, Pennsylvania; Notice of Amended Certification Pursuant to Section 221 of the Trade Act of 1974...

Renewable energies in United Kingdom

International Nuclear Information System (INIS)

Baize, T.

1993-01-01

An evaluation of research and development policy in United Kingdom on renewable energy sources is presented with economical studies (short or long term profitability), engaged programs and electric production. (A.B.). refs. tabs

Development of a mathematical model for physical disintegration of flushable consumer products in wastewater systems.

Science.gov (United States)

Karadagli, Fatih; McAvoy, Drew C; Rittmann, Bruce E

2009-05-01

The processes that flushable solid products may undergo after discharge to wastewater systems are (1) physical disintegration of solids resulting from turbulence, (2) direct dissolution of water-soluble components, (3) hydrolysis of solids to form soluble components, and (4) biodegradation of soluble and insoluble components. We develop a mathematical model for physical disintegration of flushable solid consumer products and test it with two different flushable products--product A, which has 40% water soluble-content, and product B, which has no water-soluble components. We present our modeling analysis of experimental results, from which we computed disintegration rate constants and fractional distribution coefficients for the disintegration of larger solids. The rate constants for solids of product A in units of (hour(-1)) are 0.45 for > 8-mm, 2.25 x 10(-2) for 4- to 8-mm, 0.9 x 10(-2) for 2- to 4-mm, and 1.26 x 10(-2) for 1- to 2-mm solids. The rate constants for solids of product B in units of hour(-1) are 1.8 for > 8-mm, 1.8 for 4- to 8-mm, 3.6 x 10(-1) for 2- to 4-mm, and 2.25 x 10(-3) for 1- to 2-mm solids. As indicated by the rate constants, larger solids disintegrate at a faster rate than smaller solids. In addition, product B disintegrated much faster and went mostly to the smallest size range, while product A disintegrated more slowly and was transferred to a range of intermediate solid sizes.

SYSTEMOLOGY IN DEVELOPMENT AND MANAGEMENT BY PRODUCTIVE SYSTEMS

Directory of Open Access Journals (Sweden)

PAVLOV I. D.

2016-02-01

Full Text Available Raising of problem. Important difference of our epoch is Scientific-Technical Progress. The highest stage of STP is jump from one state of science to another. The example of this process is stirring appearance of new scientific disciplines arising up on joints and drawn zones, as well as creation of scientific «hybrid» directions on the basis of multilateral connections, and appearance of new methods and research principles that gives effective results. All these innovations are the result of the united action of two outwardly opposite processes: differentiations or specializations (divisions and integrations, intercommunications (association of sciences and processes that is specific to STР. The division of sciences combines with more increasing process of their integration, with synthesis of scientific knowledge, complex approach, with the transfer of methods and research principles from one area into another and with the interpenetration of methods. Aim. The research of systemology as a tool of problem solving of joint work of elements of the productive systems taking into account intersystem connections on the base of logistic principles. Conclusions. Offered approach to the modeling of development and placing of production has an accessible form that integrates solution in a complex model with common logic and view and with main structural and functional integrity. In this model the component parts are connected, concerted and are compose the single modeling system. The consolidation of diversified problems of integrationof production is carried out by the concordance of intersystem connections of five blocks : raw material - transport – production - transport - consumer.

RECONSIDERING ECONOMIC PRODUCTIVITY

Directory of Open Access Journals (Sweden)

RIS A. MIHAI

2014-12-01

Full Text Available Economy has changed significantly over the past century, in part due to the scientific discoveries, due to the industrial revolution, to the research, development and innovation, but maybe the most important contributor to the economic development is the human resource. We have witnessed significant changes enhancing the levels of productivity, both labor and capital. This paper analyzes productivity in relation to its social and sustainability dimension. The paper follows a previous study, highlighting the most important findings identified and reinterpreting them on the basis of the most recent research papers produced by the scholars in the field. The analysis is focused on the most unsustainable economies worldwide, respectively, the United Arab Emirates, Qatar, Belgium, Kuwait, Singapore, Netherlands, Republic of Korea, Israel, Saudi Arabia, Macedonia, Japan and the United States of America – selected by considering their per capita ecological deficit. The research uses statistical data provided by the United Nations Development Program, the World Bank and the Global Footprint Network. The research combines economical, development and environmental indexes in our attempt to evaluate productivity and to adjust it so that it considers the ecological deficit of the nations. The research hypothesis that generated the study is: the levels of economic productivity obtained by countries are not limited by their biocapacities. The empirical analysis will verify the research question advocating for the need to consider the limited capacity of the planet, in term of natural resources, when promoting economic and social development.

Decision making in global product development

DEFF Research Database (Denmark)

Søndergaard, Erik Stefan; Ahmed-Kristensen, Saeema

2014-01-01

Many engineering companies experience new challenges when globalising product development. Global product development (GPD) is a relatively nascent research area, and previous research reveals the need for decision support frameworks. This research investigates how decisions are made when compani...

Development of Production Control in Small Batch Production

Directory of Open Access Journals (Sweden)

Németh Péter

2016-01-01

Full Text Available Our aim with this paper is to develop a new performance measurement and control system for small batch production in the automotive industry. For this reason, we present our previous research results for warehouse performance measurement and adopt its methodology to production control. The proposed method is based on artificial intelligence (neural networks.

The influence of capacity management on the unit cost of production: a case study in a flexible plastic packaging company

Directory of Open Access Journals (Sweden)

Tálita Floriano Goulart Silva

2013-08-01

Full Text Available This article presents the relationship between capacity management and cost management in determining the unit cost. The objective was to show how the use of effective capacity decreases the unit cost of manufacturing. For this, follow these steps: 1 Knowledge and analysis of production process and PPPC; 2 Data Collection; 3 Application of the Method Cost Center; 4Verification of the relationship between the Capacity Management and Cost Management. Through the company’s accounting reports, observations and interviews, the following results was possible: knowledge of the production process and functioning of PPCP, measuring the cost of each step of the production process and the unit cost of each product. Subsequently, we compared the unit cost using the effective capacity and normal capacity. The results showed that the unit costs decrease with the use of effective capacity, while increasing the margin for each product, even with the lower sale price, thus establishing a virtuous circle: effective capacity utilization, reduced unit cost, most competitive prices and increase in the number of requests.

Matching food service products to consumer demands through product development alliances and modularisation

DEFF Research Database (Denmark)

Olsen, Johanne Rønnow

2009-01-01

of product development managers (with the main themes food trends, meal solutions and product development alliances), as well as data from sensory studies of interactions between meal components. Apart from the quality cycle mentioned above, the research has generated the tools listed below to be applied......, more specifically, meal solutions. The results of this research contribute to the knowledge base on product development in the food industry, mainly regarding quality, product development alliances and modularisation,and fill several gaps in the literature. Future research should focus on further...... in the composition of meal solutions and, therefore cannot control all processing steps and interactions with other meal components. In this project, it is proposed that cooperation between food producers on product development (product development alliances) in relation to meal solutions can improve the quality...

An integrated renewable energy park approach for algal biofuel production in United States

International Nuclear Information System (INIS)

Subhadra, Bobban; Edwards, Mark

2010-01-01

Algal biomass provides viable third generation feedstock for liquid transportation fuel that does not compete with food crops for cropland. However, fossil energy inputs and intensive water usage diminishes the positive aspects of algal energy production. An integrated renewable energy park (IREP) approach is proposed for aligning renewable energy industries in resource-specific regions in United States for synergistic electricity and liquid biofuel production from algal biomass with net zero carbon emissions. The benefits, challenges and policy needs of this approach are discussed.

Environmentally-friendly product development: methods and tools

National Research Council Canada - National Science Library

Abele, Eberhard; Anderl, R; Birkhofer, Herbert

2005-01-01

... to assess a product's environmental effects. Fig. 1. Vision of Environment as a key target for product development vvi Preface Product related environmental issues are getting more and more political and public awareness. Development of environmentally friendly products has become an action item for both, politics and industry (UNFCCC 1997). Energy...

Structural, compositional, and sensorial properties of United States commercial ice cream products.

Science.gov (United States)

Warren, Maya M; Hartel, Richard W

2014-10-01

Commercial vanilla ice cream products from the United States (full fat, low fat, and nonfat) were analyzed for their structural, behavioral (i.e., melt rate and drip-through), compositional, and sensorial attributes. Mean size distributions of ice crystals and air cells, drip-through rates, percent partially coalesced fat, percent overrun and total fat, and density were determined. A trained panel carried out sensory analyses in order to determine correlations between ice cream microstructure attributes and sensory properties using a Spectrum(TM) descriptive analysis. Analyses included melt rate, breakdown, size of ice particulates (iciness), denseness, greasiness, and overall creaminess. To determine relationships and interactions, principle component analysis and multivariate pairwise correlation were performed within and between the instrumental and sensorial data. Greasiness and creaminess negatively correlated with drip-through rate and creaminess correlated with percent total fat and percent fat destabilization. Percent fat did not determine the melt rate on a sensorial level. However, drip-through rate at ambient temperatures was predicted by total fat content of the samples. Based on sensory analysis, high-fat products were noted to be creamier than low and nonfat products. Iciness did not correlate with mean ice crystal size and drip-through rate did not predict sensory melt rate. Furthermore, on a sensorial level, greasiness positively correlated with total percent fat destabilization and mean air cell size positively correlated with denseness. These results indicate that commercial ice cream products vary widely in composition, structure, behavior, and sensory properties. There is a wide range of commercial ice creams in the United States market, ranging from full fat to nonfat. In this research we showed that these ice creams vary greatly in their microstructures, behaviors (the melt/drip-though, collapse, and/or stand up properties of ice cream

Product Platform Development in Industrial Networks

DEFF Research Database (Denmark)

Karlsson, Christer; Skold, Martin

2011-01-01

The article examines the strategic issues involved in the deployment of product platform development in an industrial network. The move entails identifying the types and characteristics of generically different product platform strategies and clarifying strategic motives and differences. Number o...... of platforms and product brands serve as the key dimensions when distinguishing the different strategies. Each strategy has its own challenges and raises various issues to deal with.......The article examines the strategic issues involved in the deployment of product platform development in an industrial network. The move entails identifying the types and characteristics of generically different product platform strategies and clarifying strategic motives and differences. Number...

Quantitative Estimation of Risks for Production Unit Based on OSHMS and Process Resilience

Science.gov (United States)

Nyambayar, D.; Koshijima, I.; Eguchi, H.

2017-06-01

Three principal elements in the production field of chemical/petrochemical industry are (i) Production Units, (ii) Production Plant Personnel and (iii) Production Support System (computer system introduced for improving productivity). Each principal element has production process resilience, i.e. a capability to restrain disruptive signals occurred in and out of the production field. In each principal element, risk assessment is indispensable for the production field. In a production facility, the occupational safety and health management system (Hereafter, referred to as OSHMS) has been introduced to reduce a risk of accidents and troubles that may occur during production. In OSHMS, a risk assessment is specified to reduce a potential risk in the production facility such as a factory, and PDCA activities are required for a continual improvement of safety production environments. However, there is no clear statement to adopt the OSHMS standard into the production field. This study introduces a metric to estimate the resilience of the production field by using the resilience generated by the production plant personnel and the result of the risk assessment in the production field. A method for evaluating how OSHMS functions are systematically installed in the production field is also discussed based on the resilience of the three principal elements.

Product development leadership

DEFF Research Database (Denmark)

Lindgren, Peter

2006-01-01

Peter Lindgren introducerer i sin artikel begrebet ”Product Development Leadership”, som sætter fokus på produktudviklingens strategiske og markedsmæssige rolle. Begrebet omfatter bl.a. virksomhedens evne til at generere eller indfange ideer og udvikle disse via eksisterende eller nye måder...

Structuring user-centred product development processes

NARCIS (Netherlands)

Hoolhorst, F.W.B.

2012-01-01

Within the last decades, product development industry has found itself facing a general increase in product use problems. These problems originate from a mismatch between the actual functionality that the product provides and the afforded product-user interaction versus the user’s expectations

Adult mouse motor units develop almost all of their force in the subprimary range: a new all-or-none strategy for force recruitment?

Science.gov (United States)

Manuel, Marin; Heckman, C J

2011-10-19

Classical studies of the mammalian neuromuscular system have shown an impressive adaptation match between the intrinsic properties of motoneurons and the contractile properties of their motor units. In these studies, the rate at which motoneurons start to fire repetitively corresponds to the rate at which individual twitches start to sum, and the firing rate increases linearly with the amount of excitation ("primary range") up to the point where the motor unit develops its maximal force. This allows for the gradation of the force produced by a motor unit by rate modulation. In adult mouse motoneurons, however, we recently described a regime of firing ("subprimary range") that appears at lower excitation than what is required for the primary range, a finding that might challenge the classical conception. To investigate the force production of mouse motor units, we simultaneously recorded, for the first time, the motoneuron discharge elicited by intracellular ramps of current and the force developed by its motor unit. We showed that the motor unit developed nearly its maximal force during the subprimary range. This was found to be the case regardless of the input resistance of the motoneuron, the contraction speed, or the tetanic force of the motor unit. Our work suggests that force modulation in small mammals mainly relies on the number of motor units that are recruited rather than on rate modulation of individual motor units.

Systematic Product Development of Control and Diagnosis Functionalities

Science.gov (United States)

Stetter, R.; Simundsson, A.

2017-01-01

In the scientific field of systematic product development a wide range of helpful methods, guidelines and tools were generated and published in recent years. Until now little special attention was given to design guidelines aiming at supporting product development engineers to design products that allow and support control or diagnosis functions. The general trend to ubiquitous computing and the first development steps towards cognitive systems as well as a general trend toward higher product safety, reliability and reduced total cost of ownership (TCO) in many engineering fields lead to a higher importance of control and diagnosis. In this paper a first attempt is made to formulate general valid guidelines how products can be developed in order to allow and to achieve effective and efficient control and diagnosis. The guidelines are elucidated on the example of an automated guided vehicle. One main concern of this paper is the integration of control and diagnosis functionalities into the development of complete systems which include mechanical, electrical and electronic subsystems. For the development of such systems the strategies, methods and tools of systematic product development have attracted significant attention during the last decades. Today, the functionality and safety of most products is to a large degree dependent on control and diagnosis functionalities. Still, there is comparatively little research concentrating on the integration of the development of these functionalities into the overall product development processes. The paper starts with a background describing Systematic Product Development. The second section deals with the product development of the sample product. The third part clarifies the notions monitoring, control and diagnosis. The following parts summarize some insights and formulate first hypotheses concerning control and diagnosis in Systematic Product Development.

Using market information in product development

DEFF Research Database (Denmark)

Søndergaard, Helle Alsted; Harmsen, Hanne

2007-01-01

development are also fulfilled since the development teams recognize the value of the information and actively use it in their product development decision making. However, the means-end approach cannot (in its present form) reveal experienced quality since the approach includes no trying of the product...... of abstraction in consumers' minds. At the same time they are reminded that this information should feed into the process of making decisions in product development....... on the understanding of consumers' vertical and horizontal decision structure) combined with considerations on effective internal use of the information. Design/methodology/approach - The suggested model is applied in case studies in an action research project, and experiences with the application are discussed...

Validation of Ulchin Units 1, 2 CONTEMPT Model Prior to the Production of EQ Envelope Curve

International Nuclear Information System (INIS)

Hwang, Su Hyun; Kim, Min Ki; Hong, Soon Joon; Lee, Byung Chul; Suh, Jeong Kwan; Lee, Jae Yong; Song, Dong Soo

2010-01-01

The Ulchin Units 1, 2 will be refurbished with RSG (Replacement of Steam Generator) and PU (Power Uprate). The current EQ (Environmental Qualification) envelope curve should be modified according to RSG and PU. The containment P/T (Pressure/Temperature) analysis in Ulchin Units 1, 2 FSAR was done using EDF computer program PAREO6. PAREO6 uses the same assumptions as the US NRC CONTEMPT program, and the results given by both programs are in good agreement. It is utilized to determine pressure and temperature variations in a PWR containment subsequent to a reactor coolant or secondary system pipe break. But PAREO6 cannot be available to the production of EQ envelope curve, so CONTEMPT code should be used instead of PAREO6. It is essential to validate the CONTEMPT OSG (Original Steam Generator) model prior to the production of EQ envelope curve considering RSG and PU. This study has been performed to validate the CONTEMPT model of Ulchin Units 1, 2 by comparing the CONTEMPT results with the PAERO6 results in Ulchin Units 1, 2 FSAR

Validation of Ulchin Units 1, 2 CONTEMPT Model Prior to the Production of EQ Envelope Curve

Energy Technology Data Exchange (ETDEWEB)

Hwang, Su Hyun; Kim, Min Ki; Hong, Soon Joon; Lee, Byung Chul [FNC Technology Co., SNU, Seoul (Korea, Republic of); Suh, Jeong Kwan; Lee, Jae Yong; Song, Dong Soo [KEPCO Research Institute, Daejeon (Korea, Republic of)

2010-10-15

The Ulchin Units 1, 2 will be refurbished with RSG (Replacement of Steam Generator) and PU (Power Uprate). The current EQ (Environmental Qualification) envelope curve should be modified according to RSG and PU. The containment P/T (Pressure/Temperature) analysis in Ulchin Units 1, 2 FSAR was done using EDF computer program PAREO6. PAREO6 uses the same assumptions as the US NRC CONTEMPT program, and the results given by both programs are in good agreement. It is utilized to determine pressure and temperature variations in a PWR containment subsequent to a reactor coolant or secondary system pipe break. But PAREO6 cannot be available to the production of EQ envelope curve, so CONTEMPT code should be used instead of PAREO6. It is essential to validate the CONTEMPT OSG (Original Steam Generator) model prior to the production of EQ envelope curve considering RSG and PU. This study has been performed to validate the CONTEMPT model of Ulchin Units 1, 2 by comparing the CONTEMPT results with the PAERO6 results in Ulchin Units 1, 2 FSAR

An integrated renewable energy park approach for algal biofuel production in United States

Energy Technology Data Exchange (ETDEWEB)

Subhadra, Bobban [Department of Internal Medicine, School of Medicine, University of New Mexico, Albuquerque, NM 87131 (United States); Edwards, Mark [Marketing and Sustainability, W.P. Carey School of Business, Arizona State University, Tempe, AZ 85282 (United States)

2010-09-15

Algal biomass provides viable third generation feedstock for liquid transportation fuel that does not compete with food crops for cropland. However, fossil energy inputs and intensive water usage diminishes the positive aspects of algal energy production. An integrated renewable energy park (IREP) approach is proposed for aligning renewable energy industries in resource-specific regions in United States for synergistic electricity and liquid biofuel production from algal biomass with net zero carbon emissions. The benefits, challenges and policy needs of this approach are discussed. (author)

Mobile energy recording unit - the basis to improve energy productivity with principles of lean production; Mobile Energie-Erfassungseinheit (MobEE). Eine Grundlage zur Steigerung der Energieproduktivitaet auf Basis von Lean Production Prinzipien

Energy Technology Data Exchange (ETDEWEB)

Schnellbach, Peter [Fraunhofer IWU, Augsburg (Germany). Projektgruppe fuer Ressourceneffiziente mechatronische Verarbeitungsmaschinen; Beisbart, Ulrich [BMW Group, Muenchen (Germany). Abt. Steuerung Facility Management, Energie, Mobilitaet, Dienstleistungsmanagement; Reinhardt, Gunther [Technische Univ. Muenchen (Germany). Inst. fuer Werkzeugmaschinen und Betriebswissenschaften; RMV Augsburg (Germany). IWU Projektguppe; Schneider, Oliver

2012-10-15

Improvement of energy productivity in production processes will become more important in future. As one large customer, manufacturing industry has to take responsibility to make its contribution in this field. The mobile energy recording unit helps to create the necessary transparency to identify possible energy savings on the basis of lean production principles.

Key performance indicators: Global product development

DEFF Research Database (Denmark)

Taylor, Thomas Paul; Ahmed-Kristensen, Saeema

2014-01-01

The decision to globalise parts of product development is a consequence of an increasingly competitive world market. The variety of risks and opportunities as a result of the decision make it difficult for management to evaluate if global product development has been successful. This paper invest...

Biomass Production System (BPS) Plant Growth Unit

Science.gov (United States)

Morrow, R. C.; Crabb, T. M.

The Biomass Production System (BPS) was developed under the Small Business Innovative Research (SBIR) program to meet science, biotechnology and commercial plant growth needs in the Space Station era. The BPS is equivalent in size to a double middeck locker, but uses it's own custom enclosure with a slide out structure to which internal components mount. The BPS contains four internal growth chambers, each with a growing volume of more than 4 liters. Each of the growth chambers has active nutrient delivery, and independent control of temperature, humidity, lighting, and CO2 set-points. Temperature control is achieved using a thermoelectric heat exchanger system. Humidity control is achieved using a heat exchanger with a porous interface which can both humidify and dehumidify. The control software utilizes fuzzy logic for nonlinear, coupled temperature and humidity control. The fluorescent lighting system can be dimmed to provide a range of light levels. CO2 levels are controlled by injecting pure CO2 to the system based on input from an infrared gas analyzer. The unit currently does not scrub CO2, but has been designed to accept scrubber cartridges. In addition to providing environmental control, a number of features are included to facilitate science. The BPS chambers are sealed to allow CO2 and water vapor exchange measurements. The plant chambers can be removed to allow manipulation or sampling of specimens, and each chamber has gas/fluid sample ports. A video camera is provided for each chamber, and frame-grabs and complete environmental data for all science and hardware system sensors are stored on an internal hard drive. Data files can also be transferred to 3.5-inch disks using the front panel disk drive

High resolution production water footprints of the United States

Science.gov (United States)

Marston, L.; Yufei, A.; Konar, M.; Mekonnen, M.; Hoekstra, A. Y.

2017-12-01

The United States is the largest producer and consumer of goods and services in the world. Rainfall, surface water supplies, and groundwater aquifers represent a fundamental input to this economic production. Despite the importance of water resources to economic activity, we do not have consistent information on water use for specific locations and economic sectors. A national, high-resolution database of water use by sector would provide insight into US utilization and dependence on water resources for economic production. To this end, we calculate the water footprint of over 500 food, energy, mining, services, and manufacturing industries and goods produced in the US. To do this, we employ a data intensive approach that integrates water footprint and input-output techniques into a novel methodological framework. This approach enables us to present the most detailed and comprehensive water footprint analysis of any country to date. This study broadly contributes to our understanding of water in the US economy, enables supply chain managers to assess direct and indirect water dependencies, and provides opportunities to reduce water use through benchmarking.

[Prediction of the side-cut product yield of atmospheric/vacuum distillation unit by NIR crude oil rapid assay].

Science.gov (United States)

Wang, Yan-Bin; Hu, Yu-Zhong; Li, Wen-Le; Zhang, Wei-Song; Zhou, Feng; Luo, Zhi

2014-10-01

In the present paper, based on the fast evaluation technique of near infrared, a method to predict the yield of atmos- pheric and vacuum line was developed, combined with H/CAMS software. Firstly, the near-infrared (NIR) spectroscopy method for rapidly determining the true boiling point of crude oil was developed. With commercially available crude oil spectroscopy da- tabase and experiments test from Guangxi Petrochemical Company, calibration model was established and a topological method was used as the calibration. The model can be employed to predict the true boiling point of crude oil. Secondly, the true boiling point based on NIR rapid assay was converted to the side-cut product yield of atmospheric/vacuum distillation unit by H/CAMS software. The predicted yield and the actual yield of distillation product for naphtha, diesel, wax and residual oil were compared in a 7-month period. The result showed that the NIR rapid crude assay can predict the side-cut product yield accurately. The near infrared analytic method for predicting yield has the advantages of fast analysis, reliable results, and being easy to online operate, and it can provide elementary data for refinery planning optimization and crude oil blending.

Developing product families based on architectures

DEFF Research Database (Denmark)

Harlou, Ulf

2006-01-01

family master plan (PFMP). The PFMP aims at modelling product families and especially variety of product families. The results of this thesis build on research literature and experiences from the industrial partners. Extensive verifications of the theory contributions, models and tools have been carried......The subject of this PhD thesis is development of product families based on architectures. Companies are introducing more and more product variants to fulfil the market demands. These new variants add complexity to many of the processes and systems in the companies. Reuse of standard designs (i.......e. design entities) and re-use of the way new products are developed can simplify the processes and systems. Case studies show that reuse can lead to reduction of cost and time-to-market of new products. One of the means for managing reuse of standard designs within product families are architectures...

Reforming "developing" health systems: Tanzania, Mexico, and the United States.

Science.gov (United States)

Chernichovsky, Dov; Martinez, Gabriel; Aguilera, Nelly

2009-01-01

Tanzania, Mexico, and the United States are at vastly different points on the economic development scale. Yet, their health systems can be classified as "developing": they do not live up to their potential, considering the resources available to them. The three, representing many others, share a common structural deficiency: a segregated health care system that cannot achieve its basic goals, the optimal health of its people, and their possible satisfaction with the system. Segregation follows and signifies first and foremost the lack of financial integration in the system that prevents it from serving its goals through the objectives of equity, cost containment and sustainability, efficient production of care and health, and choice. The chapter contrasts the nature of the developing health care system with the common goals', objectives, and principles of the Emerging Paradigm (EP) in developed, integrated--yet decentralized--systems. In this context, the developing health care system is defined by its structural deficiencies, and reform proposals are outlined. In spite of the vast differences amongst the three countries, their health care systems share strikingly similar features. At least 50% of their total funding sources are private. The systems comprise exclusive vertically integrated, yet segregated, "silos" that handle all systemic functions. These reflect and promote wide variations in health insurance coverage and levels of benefits--substantial portions of their populations are without adequate coverage altogether; a considerable lack of income protection from medical spending; an inability to formalize and follow a coherent health policy; a lack of financial discipline that threatens sustainability and overall efficiency; inefficient production of care and health; and an dissatisfied population. These features are often promoted by the state, using tax money, and donors. The situation can be rectified by (a) "centralizing"--at any level of development

Developing maximal neuromuscular power: Part 1--biological basis of maximal power production.

Science.gov (United States)

Cormie, Prue; McGuigan, Michael R; Newton, Robert U

2011-01-01

This series of reviews focuses on the most important neuromuscular function in many sport performances, the ability to generate maximal muscular power. Part 1 focuses on the factors that affect maximal power production, while part 2, which will follow in a forthcoming edition of Sports Medicine, explores the practical application of these findings by reviewing the scientific literature relevant to the development of training programmes that most effectively enhance maximal power production. The ability of the neuromuscular system to generate maximal power is affected by a range of interrelated factors. Maximal muscular power is defined and limited by the force-velocity relationship and affected by the length-tension relationship. The ability to generate maximal power is influenced by the type of muscle action involved and, in particular, the time available to develop force, storage and utilization of elastic energy, interactions of contractile and elastic elements, potentiation of contractile and elastic filaments as well as stretch reflexes. Furthermore, maximal power production is influenced by morphological factors including fibre type contribution to whole muscle area, muscle architectural features and tendon properties as well as neural factors including motor unit recruitment, firing frequency, synchronization and inter-muscular coordination. In addition, acute changes in the muscle environment (i.e. alterations resulting from fatigue, changes in hormone milieu and muscle temperature) impact the ability to generate maximal power. Resistance training has been shown to impact each of these neuromuscular factors in quite specific ways. Therefore, an understanding of the biological basis of maximal power production is essential for developing training programmes that effectively enhance maximal power production in the human.

Hiring, Developing, and Organizing Individual Employees for New Product Development versus Product-related Service Innovation

DEFF Research Database (Denmark)

Knudsen, Mette Præst; Schleimer, Stephanie

should be hired. For the latter case, these employees’ individual careers must be developed internally once hired. The paper therefore carries important implication for the innovation management literature and related human resource practices at different organizational levels.......This study examines how manufacturing firms should organize their human resources by maximizing the value of individual employees for different forms of innovations. In particular, it examines the hiring, developing, and structural organization of human resources for optimizing different innovation...... the value of human resource hiring and developing practices for new product development success; organizations will find it more beneficial to invest predominantly in employees with the highest possible educational level, whilst for product-related service innovations; employees with more general skills...

Use estimates of in-feed antimicrobials in swine production in the United States.

Science.gov (United States)

Apley, Michael D; Bush, Eric J; Morrison, Robert B; Singer, Randall S; Snelson, Harry

2012-03-01

When considering the development of antimicrobial resistance in food animals, comparing gross use estimates of different antimicrobials is of little value due to differences in potencies, duration of activity, relative effect on target and commensal bacteria, and mechanisms of resistance. However, it may be valuable to understand quantities of different antimicrobials used in different ages of swine and for what applications. Therefore, the objective of this project was to construct an estimate of antimicrobial use through the feed in swine production in the United States. Estimates were based on data from the National Animal Health Monitoring System (NAHMS) Swine 2006 Study and from a 2009 survey of swine-exclusive practitioners. Inputs consisted of number of pigs in a production phase, feed intake per day, dose of the antimicrobial in the feed, and duration of administration. Calculations were performed for a total of 102 combinations of antimicrobials (n=17), production phases (n=2), and reasons for use (n=3). Calculations were first conducted on farm-level data, and then extrapolated to the U.S. swine population. Among the nursery phase estimates, chlortetracycline had the largest estimate of use, followed by oxytetracycline and tilmicosin. In the grower/finisher phase, chlortetracycline also had the largest use estimate, followed by tylosin and oxytetracycline. As an annual industry estimate for all phases, chlortetracycline had the highest estimated use at 533,973 kg. The second and third highest estimates were tylosin and oxytetracycline with estimated annual uses of 165,803 kg and 154,956 kg, respectively. The estimates presented here were constructed to accurately reflect available data related to production practices, and to provide an example of a scientific approach to estimating use of compounds in production animals.

What and how about customer-driven product development

DEFF Research Database (Denmark)

Sommer, Anita Friis; Steger-Jensen, Kenn

2012-01-01

Collaborative product development is of increasing interest as customer demands increases while product life cycles decrease. This study investigates how suppliers handle active customers including managing customer requests for new products and customer-driven product development. A large...... structured literature review of the top 20 supply chain management journals is conducted to explore existing literature. Research states the importance of active integration in product development, but does not provide answers to how suppliers can manage this in practice. A 2x2 matrix is developed describing...... the differing views on customers in existing research including customer actions on both new and existing products....

Product Development and Commercialization of Diagnostic or Life Science Products for Scientists and Researchers.

Science.gov (United States)

Alonso, Meghan M

2017-01-01

Commercializing a diagnostic or life science product often encompasses different goals than that of research and grant funding. There are several necessary steps, and a strategy needs to be well defined in order to be successful. Product development requires input from and between various groups within a company and, for academia, outside entities. The product development stakeholder groups/entities are research, marketing, development, regulatory, manufacturing, clinical, safety/efficacy, and quality. After initial research and development, much of the work in product development can be outsourced or jointly created using public-private partnerships. This chapter serves as an overview of the product development process and provides a guide to best define a product strategy.

VARIANTS OF DETERMINING THE MANUFACTURING COST OF A PRODUCT IN A PRODUCTION UNIT IN THE LIGHT OF BALANCE SHEET LAW

Directory of Open Access Journals (Sweden)

Marzena STROJEK‐FILUS

2014-01-01

Full Text Available The category of the manufacturing cost of a product is one of the most important ones from the point of view of proper valuation of the assets of a production unit, costs of its operations as well as pricing decisions. This article presents the problem of determining the manufacturing cost of a product in terms of balance sheet law. It has been shown that in order to determine this value various methods and options are allowed by this law, by means of which different values of manufacturing cost of a product are obtained. The importance of a proper selection of an allocation key in setilement of indirect production costs has been highlighted as well as the results of using, in certain cases, approved simplifications in the balance sheet law when determining the manufacturing cost of products have been demonstrated. The problem presented in this article is crucial from the point of view of an organization and management of production as well as managerial decision‐making in a company in the area of design of products and processes.

Product development projects dynamics and emergent complexity

CERN Document Server

Schlick, Christopher

2016-01-01

This book primarily explores two topics: the representation of simultaneous, cooperative work processes in product development projects with the help of statistical models, and the assessment of their emergent complexity using a metric from theoretical physics (Effective Measure Complexity, EMC). It is intended to promote more effective management of development projects by shifting the focus from the structural complexity of the product being developed to the dynamic complexity of the development processes involved. The book is divided into four main parts, the first of which provides an introduction to vector autoregression models, periodic vector autoregression models and linear dynamical systems for modeling cooperative work in product development projects. The second part presents theoretical approaches for assessing complexity in the product development environment, while the third highlights and explains closed-form solutions for the complexity metric EMC for vector autoregression models and linear dyn...

p-Phenylenediamine and other allergens in hair dye products in the United States

DEFF Research Database (Denmark)

Hamann, Dathan; Yazar, Kerem; Hamann, Carsten R

2014-01-01

product contained six (range 0-11). p-Phenylenediamine (PPD) was found in 83 products (78%), but resorcinol (89%), m-aminophenol (75%), p-aminophenol (60%) and toluene-2,5-diamine (21%) were also frequently identified. CONCLUSIONS: Potent contact sensitizers were almost universally included in the hair...... dyes investigated in the United States. Although PPD is a common allergen, resorcinol and m-aminophenol were found more frequently. In total, 30 potent sensitizers were found. Clinicians should consider other allergens in addition to PPD when evaluating patients with suspected hair dye allergy....

Nontimber forest products in the United States: an analysis for the 2015 National Sustainable Forest Report

Science.gov (United States)

James Chamberlain; Aaron Teets; Steve Kruger

2018-01-01

Worldwide, forest plants and fungi that are harvested for their nontimber products are critical for the health of the ecosystems and the well-being of people who benefit from the harvest. This document provides an analysis of the volumes and values of nontimber forest products in the United States. It presents...

Bank Units. Assessment and Development Tendencies

Directory of Open Access Journals (Sweden)

Adam Szafarczyk

2008-01-01

Full Text Available There are new trends in development banking sector especially concerning branches. The e-banking has diminished impact the old fashion branches as main tool finance activity. Now we have units (departments localised at supermarkets and in other strange places. Due to some researches mortgages and insurance polices ought to be sold in traditional branches according to clients preferences. Lafferty Agency researched quality of banking service condition in the UK. Base on this methodology similar case studies were done in Poland.

A short course in sustainable product development

DEFF Research Database (Denmark)

McAloone, Tim C.

2005-01-01

This short course in sustainable product development models, methods and mindsets is designed to fit into the Unical course on Engineering Design Methods. Three modules (called “seminars”) will guide you through . The demands for sustainable development . Professional methods for analysing and ch...... and changing products’ environmental profiles . A new approach to product service system development, where the physical product becomes an incidental aspect in the final offering to the customer...

NASA/DOD Aerospace Knowledge Diffusion Research Project. Paper 62: The Influence of Knowledge Diffusion on Aeronautics Innovation: The Research, Development, and Production of Large Commercial Aircraft in France, Germany, and the United Kingdom

Science.gov (United States)

Golich, Vicki L.; Pinelli, Thomas E.

1997-01-01

This paper focuses on how European public policies-individually and collectively - influence the diffusion of knowledge and technology. It begins with an overview of the roles played historically and currently by European governments in the Research, Development and Production (RD&P) of Large Commercial Aircraft (LCA). The analytical framework brings together literature from global political economy, comparative politics, business management, and science and technology policy studies. It distinguishes between the production of knowledge, on the one hand, and the dissemination of knowledge, on the other. France, Germany, and the United Kingdom serve as the analytical cases. The paper concludes with a call for additional research in this area, some tentative lessons learned, and a discussion of the consequences of national strategies and policies for the diffusion of knowledge and technology in an era of globalizaton.

Integrating concerns about wood production and sustainable forest management in the United States.

Science.gov (United States)

R.W. Haynes

2007-01-01

The implementation of Sustainable Forest Management (SFM) in the United States is strongly influenced by U.S. forest products markets and the numerous management decisions made by individual landowners and managers. These decisions are influenced by a mix of market incentives and regulatory actions reducing predictability in assessing progress towards SFM and causing...

Green electricity policies in the United States: case study

International Nuclear Information System (INIS)

Menz, Fredric C.

2005-01-01

While there has been interest in promoting the use of renewable energy in electricity production for a number of years in the United States, the market share of non-hydro renewable energy sources in electricity production has remained at about 2 percent over the past decade. The paper reviews the principal energy resources used for electricity production, considers the changing regulatory environment for the electricity industry, and describes government policies that have been used to promote green electricity in the United States, with an emphasis on measures adopted by state governments. Factors influencing the development of green power markets are also discussed, including underlying economic issues, public policy measures, the regulatory environment, external costs, and subsidies. Without significant increases in fossil fuel prices, much more stringent environmental regulations, or significant changes in electricity customer preferences, green electricity markets are likely to develop slowly in the United States

Clamping characteristics study on different types of clamping unit

Energy Technology Data Exchange (ETDEWEB)

Jiao, Zhiwei; Liu, Haichao; Xie, Pengcheng [College of Mechanical and Electrical Engineering, Beijing University of Chemical Technology, Beijing China 100029 (China); Yang, Weimin [College of Mechanical and Electrical Engineering, Beijing University of Chemical Technology, Beijing China 100029 (China); State Key Laboratory of Organic-Inorganic Composites, Beijing University of Chemical Technology, Beijing China 100029 (China)

2015-05-22

Plastic products are becoming more and more widely used in aerospace, IT, digital electronics and many other fields. With the development of technology, the requirement of product precision is getting higher and higher. However, type and working performance of clamping unit play a decisive role in product precision. Clamping characteristics of different types of clamping unit are discussed in this article, which use finite element numerical analysis method through the software ABAQUS to study the clamping uniformity, and detect the clamping force repeatability precision. The result shows that compared with toggled three-platen clamping unit, clamping characteristics of internal circulation two-platen clamping unit are better, for instance, its mold cavity deformation and force that bars and mold parting surface suffered are more uniform, and its clamping uniformity and repeatability precision is also better.

The Significance of Consumer’s Awareness about Organic Food Products in the United Arab Emirates

OpenAIRE

Safdar Muhummad; Eihab Fathelrahman; Rafi Ullah Tasbih Ullah

2016-01-01

Awareness about negative externalities generated by conventional farming is gaining momentum with consumers around the world, opting for alternatively, namely organically, produced food products. Information about consumers’ awareness is an essential element for farmers and marketing agencies to successfully plan production that can capture a greater market share. This study discusses effective factors influencing consumers’ awareness about the benefits of organic food in the United Arab Emir...

Aligning clinical compensation with clinical productivity: design and implementation of the financial value unit (FVU) system in an academic department of internal medicine.

Science.gov (United States)

Stites, Steven; Steffen, Patrick; Turner, Scott; Pingleton, Susan

2013-07-01

A new metric was developed and implemented at the University of Kansas School of Medicine Department of Internal Medicine, the financial value unit (FVU). This metric analyzes faculty clinical compensation compared with clinical work productivity as a transparent means to decrease the physician compensation variability and compensate faculty equitably for clinical work.The FVU is the ratio of individual faculty clinical compensation compared with their total work relative value units (wRVUs) generated divided by Medical Group Management Association (MGMA) salary to wRVUs of a similar MGMA physician.The closer the FVU ratio is to 1.0, the closer clinical compensation is to that of an MGMA physician with similar clinical productivity. Using FVU metrics to calculate a faculty salary gap compared with MGMA median salary and wRVU productivity, a divisional production payment was established annually.From FY 2006 to FY 2011, both total faculty numbers and overall clinical activity increased. With the implementation of the FVU, both clinical productivity and compensation increased while, at the same time, physician retention rates remained high. Variability in physician compensation decreased. Dramatic clinical growth was associated with the alignment of clinical work and clinical compensation in a transparent and equable process.

Fuzzy production planning models for an unreliable production system with fuzzy production rate and stochastic/fuzzy demand rate

Directory of Open Access Journals (Sweden)

K. A. Halim

2011-01-01

Full Text Available In this article, we consider a single-unit unreliable production system which produces a single item. During a production run, the production process may shift from the in-control state to the out-of-control state at any random time when it produces some defective items. The defective item production rate is assumed to be imprecise and is characterized by a trapezoidal fuzzy number. The production rate is proportional to the demand rate where the proportionality constant is taken to be a fuzzy number. Two production planning models are developed on the basis of fuzzy and stochastic demand patterns. The expected cost per unit time in the fuzzy sense is derived in each model and defuzzified by using the graded mean integration representation method. Numerical examples are provided to illustrate the optimal results of the proposed fuzzy models.

Energy Sprawl Is the Largest Driver of Land Use Change in United States.

Directory of Open Access Journals (Sweden)

Anne M Trainor

Full Text Available Energy production in the United States for domestic use and export is predicted to rise 27% by 2040. We quantify projected energy sprawl (new land required for energy production in the United States through 2040. Over 200,000 km2 of additional land area will be directly impacted by energy development. When spacing requirements are included, over 800,000 km2 of additional land area will be affected by energy development, an area greater than the size of Texas. This pace of development in the United States is more than double the historic rate of urban and residential development, which has been the greatest driver of conversion in the United States since 1970, and is higher than projections for future land use change from residential development or agriculture. New technology now places 1.3 million km2 that had not previously experienced oil and gas development at risk of development for unconventional oil and gas. Renewable energy production can be sustained indefinitely on the same land base, while extractive energy must continually drill and mine new areas to sustain production. We calculated the number of years required for fossil energy production to expand to cover the same area as renewables, if both were to produce the same amount of energy each year. The land required for coal production would grow to equal or exceed that of wind, solar and geothermal energy within 2-31 years. In contrast, it would take hundreds of years for oil production to have the same energy sprawl as biofuels. Meeting energy demands while conserving nature will require increased energy conservation, in addition to distributed renewable energy and appropriate siting and mitigation.

Product Innovation Development in the Companies of Creative Industries

Directory of Open Access Journals (Sweden)

Rolandas Strazdas

2011-10-01

Full Text Available Many authors distinguish product innovation as a key factor for long-term competitiveness. Dominant narrow perception of a product is leading towards incorrect product development process and the consequent result is a bad product. Narrow perception of a product is one of the main paralysing factors affecting the creator in the process of product development, which leads towards a low level of product innovation. As a result, a company is losing its uniqueness, originality, and is not of  interest neither for consumers nor the product developers themselves. This article deals with the product perception problems in the companies of creative industries. The main limiting factors for the perception of a product are analysed in the article as well as possibilities to expand the perception of a product. Five main product development methods: conservative, delegative, holistic, limited open, fully open are described in the article. The choice of the product development methods is especially important for the creative industries companies whose product development process is very intensive. 

Economic productivity by age and sex: 2007 estimates for the United States.

Science.gov (United States)

Grosse, Scott D; Krueger, Kurt V; Mvundura, Mercy

2009-07-01

Human capital estimates of labor productivity are often used to estimate the economic impact of diseases and injuries that cause incapacitation or death. Estimates of average hourly, annual, and lifetime economic productivity, both market and household, were calculated in 2007 US dollars for 5-year age groups for men, women, and both sexes in the United States. Data from the American Time Use Survey were used to estimate hours of paid work and household services and hourly and annual earnings and household productivity. Present values of discounted lifetime earnings were calculated for each age group using the 2004 US life tables and a discount rate of 3% per year and assuming future productivity growth of 1% per year. The estimates of hours and productivity were calculated using the time diaries of 72,922 persons included in the American Time Use Survey for the years 2003 to 2007. The present value of lifetime productivity is approximately $1.2 million in 2007 dollars for children under 5 years of age. For adults in their 20s and 30s, it is approximately $1.6 million and then it declines with increasing age. Productivity estimates are higher for males than for females, more for market productivity than for total productivity. Changes in hours of paid employment and household services can affect economic productivity by age and sex. This is the first publication to include estimates of household services based on contemporary time use data for the US population.

DEVELOPMENT OF A HYDRONIC ROOFTOP UNIT -- HYPAK

Energy Technology Data Exchange (ETDEWEB)

Eric Lee; Dick Bourne; Mark Berman

2004-03-25

The majority of US commercial floor space is cooled by rooftop HVAC units (RTU's). RTU popularity derives chiefly from their low initial cost and relative ease of service access without disturbing building occupants. Unfortunately, current RTU's are inherently inefficient due to a combination of characteristics that unnecessarily increase cooling loads and energy use. Existing RTU's in the U.S. consume an estimated 2.4 quads annually. Inefficient RTU's create an estimated 3.5% of U.S. CO{sub 2} emissions, thus contributing significantly to global warming. Also, RTU's often fail to maintain adequate ventilation air and air filtration. This project was developed to evaluate the feasibility of a radically new ''HyPak'' RTU design that significantly and cost-effectively increases RTU performance and delivered air quality. The objective of the HyPak Project was to design, develop and test a hydronic RTU that provides a quantum improvement over conventional RTU performance. Our proposal targeted 60% and 50% reduction in electrical energy use by the HyPak RTU for dry and humid climates, respectively, when compared with a conventional unit.

Integrating ergonomics into the product development process

DEFF Research Database (Denmark)

Broberg, Ole

1997-01-01

and production engineers regarding information sources in problem solving, communication pattern, perception of ergonomics, motivation and requests to support tools and methods. These differences and the social and organizational contexts of the development process must be taken into account when considering......A cross-sectional case study was performed in a large company producing electro-mechanical products for industrial application. The purpose was to elucidate conditions and strategies for integrating ergonomics into the product development process thereby preventing ergonomic problems at the time...... of manufacture of new products. In reality the product development process is not a rational problem solving process and does not proceed in a sequential manner as decribed in engineering models. Instead it is a complex organizational process involving uncertainties, iterative elements and negotiation between...

Development of regulatory requirements/guides for desalination unit coupled with nuclear plant

International Nuclear Information System (INIS)

Jo, Jong Chull; Yune, Young Gill; Kim, Woong Sik

2005-10-01

The basic design of System-integrated Modular Advanced Reactor (SMART), a small-to-medium sized integral type pressurized water reactor (PWR) with the capacity of 330MWth, has been developed in Korea. In order to demonstrate the safety and performance of the SMART design, 'Development Project of SMART-P (SMART-Pilot Plant)' has been being performed as one of the 'National Mid and Long-term Atomic Energy R and D Programs', which includes design, construction, and start-up operation of the SMART-P with the capacity of 65MWth, a 1/5 scaled-down design of the SMART. At the same time, a study on the development of regulatory requirements/guides for the desalination unit coupled with nuclear plant has been carried out by KINS in order to prepare for the forthcoming SMART-P licensing. The results of this study performed from August of 2002 to October of 2005 can be summarized as follows: (1) The general status of desalination technologies has been survey. (2) The design of the desalination plant coupled with the SMART-P has been investigated. (3) The regulatory requirements/guides relevant to a desalination unit coupled with a nuclear plant have been surveyed. (4) A direction on the development of domestic regulatory requirements/guides for a desalination unit has been established. (5) A draft of regulatory requirements/guides for a desalination unit has been developed. (6) Expert technical reviews have been performed for the draft regulatory requirements/guides for a desalination unit. The draft regulatory requirements/guides developed in this study will be finalized and can be applied directly to the licensing of the SMART-P and SMART. Furthermore, it will be also applied to the licensing of the desalination unit coupled with the nuclear plant

Modelling architectures in multi-product oriented technology development

DEFF Research Database (Denmark)

Guðlaugsson, Tómas Vignir

are not completely defined. Yet, decisions need to be made during technology development on the capabilities to be provided through the development to fulfil future application requirements,provide a foundation for future products, and development of a production system capable of producing future products...

Green Hydrogen Production from Raw Biogas: A Techno-Economic Investigation of Conventional Processes Using Pressure Swing Adsorption Unit

Directory of Open Access Journals (Sweden)

Gioele Di Marcoberardino

2018-02-01

Full Text Available This paper discusses the techno-economic assessment of hydrogen production from biogas with conventional systems. The work is part of the European project BIONICO, whose purpose is to develop and test a membrane reactor (MR for hydrogen production from biogas. Within the BIONICO project, steam reforming (SR and autothermal reforming (ATR, have been identified as well-known technologies for hydrogen production from biogas. Two biogases were examined: one produced by landfill and the other one by anaerobic digester. The purification unit required in the conventional plants has been studied and modeled in detail, using Aspen Adsorption. A pressure swing adsorption system (PSA with two and four beds and a vacuum PSA (VPSA made of four beds are compared. VPSA operates at sub-atmospheric pressure, thus increasing the recovery: results of the simulations show that the performances strongly depend on the design choices and on the gas feeding the purification unit. The best purity and recovery values were obtained with the VPSA system, which achieves a recovery between 50% and 60% at a vacuum pressure of 0.1 bar and a hydrogen purity of 99.999%. The SR and ATR plants were designed in Aspen Plus, integrating the studied VPSA model, and analyzing the behavior of the systems at the variation of the pressure and the type of input biogas. The SR system achieves a maximum efficiency, calculated on the LHV, of 52% at 12 bar, while the ATR of 28% at 18 bar. The economic analysis determined a hydrogen production cost of around 5 €/kg of hydrogen for the SR case.

Consequences of new product development speed : a meta-analysis

NARCIS (Netherlands)

Cankurtaran, P.; Langerak, F.; Griffin, A.

2013-01-01

Five meta-analyses previously have been published on the topic of new product development involving the concept of new product development speed. Three of these studies have investigated antecedents to new product development success, of which just one was new product development speed. The other

Sustainable Product Development Through a Life-Cycle Approach to Product and Service Creation (Keynote speech)

DEFF Research Database (Denmark)

McAloone, Timothy Charles

. These two schools of environmental re-search practice are mirrored in the way in which industry approaches environmental problems. Since the definition in 1987 of Sustainable Development [2] efforts have been made to relate the goals and ideals of sustainabil-ity to the domain of product development, thus...... adding new dimensions, such as social and moral values, to the original agenda of environmental improvement. The redefinition of the role of the product developer, from environmentally conscious product de-veloper to sustainably aware product developer has led to new insights into the way in which...... products are developed and used ¿ and to where environmental effects occur in the lifetime of a product. The role of the product developer is thus more complex in relation to sustainability, as the focus for improvement of a product may not (and very often does not) lie in the physical artefactual...

Promoting bioethanol production through clean development mechanism: Findings and lessons learnt from ASIATIC project

Energy Technology Data Exchange (ETDEWEB)

Gnansounou, Edgard; Bedniaguine, Denis; Dauriat, Arnaud

2005-12-15

Global climate change mitigation policies call for increasing use of biomass fuels as renewable substitutes to fossil energy resources. Quantified targets for biofuels introduction in to the market exist in the United States, the European Union, and a number of developing countries. In this context, mixing biologically produced ethanol with conventional gasoline represents an attractive technical option allowing for reducing emissions of greenhouse gases and lessening the dependence on non-renewable petrol in the transportation sector. This paper investigates technological and socio-economic aspects of ethanol production in developing countries, particularly in China, with special focus on determining eligibility of bioethanol projects for Clean Development Mechanism. Basing on the findings of the ASIATIC study (Agriculture and Small to Medium Scale Industries in Peri-urban Areas through Ethanol Production for Transport In China), we analyse how alcohol fuels can be produced in a sustainable way with mutual benefits between rural and urban people. The bioethanol production cost and life cycle CO2 eq. emissions were calculated for six different types of feedstock: sugarcane, sugarcane molasses, sweet sorghum juice, cassava, corn, and sorghum bagasse. Implications of the CDM rules and procedures for bioethanol industry were examined under the angles of environmental and economical additionality, and conformity with the principles of sustainable development. It is found that the starch-based (cassava) ethanol production path has the greatest potential for market penetration in China, followed by the conversion route using sugar-based feedstock (sorghum juice, sugarcane molasses). Meanwhile, the lignocelluloses biomass - to - ethanol technology may represent the highest interest for implementation as Clean Development Mechanism project. (Author)

The management of human resources in the Basic Units of Cooperative Production in Cuba: An essential challenge

Directory of Open Access Journals (Sweden)

Deysi Alfonso Porraspita

2018-02-01

Full Text Available The socioeconomic structure of Cuba has undergone a stage of profound transformation, with various factors that have intervened in this process, where different forms of business structures have converged, one of which has been represented by the cooperative sector, fundamentally developed in agriculture from the country. In this scenario the issue of the effectiveness of these entities has been subject to dissimilar analyzes and debates from different sides, where what is related to the human factor has played an essential role, this implies a detailed observation of the adequate management of human resources in the integral management of these organizations. In this line, the fundamental challenge will be to manage human resources in a way that contributes to the continuous improvement of the Cooperative Production Units as one of the representative structures of the agrarian cooperative sector in Cuba. Carrying out an analysis highlighting the importance of the management of human resources as a contribution to affectivity of the Basic Units of Cooperative production constituted the objective of the work. Through analysis, synthesis and use of the logical historical in the system analysis, the work addressed the theoretical pillars and methodological aspects that support the management of human resources in the cooperative entities analyzed as a tribute to the effectiveness of their results.

High-speed ground transportation development outside United States

Energy Technology Data Exchange (ETDEWEB)

Eastham, T.R. [Queen`s Univ., Kingston, Ontario (United Kingdom)

1995-09-01

This paper surveys the state of high-speed (in excess of 200 km/h) ground-transportation developments outside the United States. Both high-speed rail and Maglev systems are covered. Many vehicle systems capable of providing intercity service in the speed range 200--500 km/h are or will soon be available. The current state of various technologies, their implementation, and the near-term plans of countries that are most active in high-speed ground transportation development are reported.

New product development processes for ICT-for-development projects

CSIR Research Space (South Africa)

McAlister, BN

2012-08-01

Full Text Available in developing regions of the world is increasing rapidly. A number of methods and practices have been used by organizations to develop and deliver such ICT solutions, but a need exists to formalize product development processes for use in the ICT...

Challenging the sustainability of micro products development

DEFF Research Database (Denmark)

De Grave, Arnaud; Olsen, Stig Irving

2006-01-01

Environmental aspects are one of the biggest concerns regarding the future of manufacturing and product development sustainability. Furthermore, micro products and micro technologies are often seen as the next big thing in terms of possible mass market trend and boom. Many questions are raised...... and the intermediate parts which can be in-process created. Possible future trends for micro products development scheme involving environmental concerns are given....

Ineffective participation: reactions to absentee and incompetent nurse leadership in an intensive care unit.

Science.gov (United States)

Rouse, Ruby A

2009-05-01

The aim of the present study was to analyse reactions to ineffective leader participation in an intensive care unit (ICU). Critical examination of leadership failures helps identify nurse manager behaviours to avoid. An online survey collected data from 51 interacting healthcare providers who work in an intensive care unit. Participants reported dissatisfaction with nurse leaders who were perceived as absent or ill prepared. Participants categorized intensive care unit productivity and morale as moderate to low. Multiple regression suggested the best predictor of perceived unit productivity was supervisor communication; the best predictor of employee morale was perceived leader mentoring. Intensive care unit nurses reported wanting active participation from their leaders and expressed dissatisfaction when supervisors were perceived as absent or incompetent. Ineffective leader participation significantly correlated with lower employee perceptions of productivity and morale. Senior managers should recruit and develop supervisors with effective participation skills. Organizations primarily concerned about productivity should focus on developing the communication skills of nurse leaders. Units mainly concerned with employee morale should emphasize mentorship and role modelling. Formal assessment of nurse leaders by all intensive care unit team members should also be used to proactively identify opportunities for improvement.

Design, fabrication, and dynamic testing of a V-groove radiator mechanical development unit

Science.gov (United States)

Petrick, S. Walter; Bard, Steven

1988-01-01

This paper describes the design, fabrication, and dynamic testing of a V-groove radiator development unit. The intended goal was to survive the dynamic environment of the Mars Observer mission. The development unit was designed to achieve a temperature of 80 K with a heat load of about 80 milliwatts. An analysis was performed to predict the thermal performance of the development unit. The radiator with a mass mockup of a Gamma Ray Spectrometer detector, the most massive of the candidate Mars Observer instrument detectors (1.7 Kg), passed vibration and acoustic testing to the Mars Observer requirements in effect at that time.

Development of a handy-type laser surgical unit

Science.gov (United States)

Abe, Yusuke; Wakamatsu, Koh; Goto, Shigeru

2005-07-01

We proposed a concept of a handy-type laser surgical unit for use in outpatient, in ward and in open-air field. To investigate the possibility of the concept, a handy-type semiconductor laser surgical unit was developed experimentally using 2-watts power laser diode with no built-in electrical cooling unit (Peltier chip) and a small rechargeable battery. The drive circuit was constructed with only current limit and ACC circuits. The laser diode was cooled with heat sink and simple fan. Laser irradiation was set to stop at 30 degree Celsius by monitoring the temperature of laser diode with thermistor temperature sensor. With this system, 1.18 watts of laser power at the end of optical fiber with both 600 and 900mm core diameter, and about 30 minutes of continuous irradiating time with Ni-Cd battery (4.8V 1,500mA/h) could be obtained with no over heating in laser diode. The result showed that the high power semiconductor laser could be driven with small battery when specially designed. In an animal experiment, small bleeding could be managed with contact irradiation method. This kind of simple laser surgical unit is considered to be useful for the management of small bleedings in clinical.

Control and Diagnosis in Integrated Product Development - Observations during the Development of an AGV

Science.gov (United States)

Stetter, R.; Simundsson, A.

2015-11-01

This paper is concerned with the integration of control and diagnosis functionalities into the development of complete systems which include mechanical, electrical and electronic subsystems. For the development of such systems the strategies, methods and tools of integrated product development have attracted significant attention during the last decades. Today, it is generally observed that product development processes of complex systems can only be successful if the activities in the different domains are well connected and synchronised and if an ongoing communication is present - an ongoing communication spanning the technical domains and also including functions such as production planning, marketing/distribution, quality assurance, service and project planning. Obviously, numerous approaches to tackle this challenge are present in scientific literature and in industrial practice, as well. Today, the functionality and safety of most products is to a large degree dependent on control and diagnosis functionalities. Still, there is comparatively little research concentrating on the integration of the development of these functionalities into the overall product development processes. The main source of insight of the presented research is the product development process of an Automated Guided Vehicle (AGV) which is intended to be used on rough terrain. The paper starts with a background describing Integrated Product Development. The second section deals with the product development of the sample product. The third part summarizes some insights and formulates first hypotheses concerning control and diagnosis in Integrated Product Development.

78 FR 24199 - Streak Products, Inc. v. UTi, United States, Inc.; Notice of Filing of Complaint and Assignment

Science.gov (United States)

2013-04-24

... FEDERAL MARITIME COMMISSION [Docket No. 13--04] Streak Products, Inc. v. UTi, United States, Inc...,'' against UTi, United States, Inc. (``UTi''), hereinafter ``Respondent.'' Complainant states that it is a... therefore, has violated 46 U.S.C. 41104(2). Complainant also alleges that ``UTi engaged in an unfair or...

Analysis of Maize versus Ethanol Production in Nebraska, United States and International Agricultural Droughts: Lessons for Global Food Security

Science.gov (United States)

Boken, V.; Tenkorang, F.

2012-04-01

Nebraska is one of the eight main corn (maize) belt states of the United States. Maize is the major crop of Nebraska with an average annual production of about 38 million tons (about 12% of U.S. production), which contributes billions of dollars to the state's economy. The yield of maize has increased significantly over the past century - from 1.6 t/ha in 1900 to 10.4 t/ha in 2010. While the majority of maize (about 40%) is currently used for animal feed and ethanol production, only about six percent is exported. It is estimated that about one billion people accounting for about 15% population of the world live in chronic hunger because of low agricultural productivity and drought. Most of these people depend on the U.S. for grains including maize. If a greater quantity of maize is diverted to ethanol production, considerably less quantity of maize would be available for export to developing countries where it could be used for human consumption and to mitigate hunger and improve food security. This paper presents analysis of maize production in Nebraska for the past three decades and examines how its commercialization for ethanol production has affected its exports in the face of drought at an international level.

THE RENEWABLE ENERGY PRODUCTION-ECONOMIC DEVELOPMENT NEXUS

Directory of Open Access Journals (Sweden)

Gorkemli Kazar

2014-04-01

Full Text Available As renewable energy requirements increases, its relation with development is controversial. In this study, by taking human development index for development level, the relationship between renewable electricity net generation values and development has been searched with panel analysis. Study covers two different time periods: 1980-2010 with 5 year data to analyze long term effects and 2005-2010 yearly data for short term effects. Unlike previous studies, energy generation has been taken into consideration for it is thought to be more related with economic development. It is found that in the long run economic development will be leading to renewable energy production, while in the short run there exists a bidirectional causal relationship between renewable energy production and economic development. In addition, the causal relationship between economic development and renewable energy production varies both in the long run and in the short run due to human development level of the countries.

Characterization of the southwest United States for the production of biomass energy crops

Energy Technology Data Exchange (ETDEWEB)

Salk, M.S.; Folger, A.G.

1987-03-01

The southwest United States, an area of diverse climate, topography, terrain, soils, and vegetation, is characterized to determine the feasibility of growing terrestrial energy crops there. The emphasis in the study is on delineating general zones of relative resource and environmental suitability, which are then evaluated to estimate the potential of the region for energy crop production. 100 refs., 25 figs., 24 tabs.

Development of RI Target Production Technology

International Nuclear Information System (INIS)

Jeong, Do Young; Ko, Kwang Hoon; Kim, Cheol Jung; Kim, Taek Soo; Rho, Si Pyo; Park, Hyun Min; Lim, Gwon; Cha, Yong Ho; Han, Jae Min

2010-04-01

This project was accomplished with an aim of productive technical development on the 'enriched target' which is used essentially in radioisotope production. The research was advanced systematically with target production pilot system configuration and core technical development. We composed Yb-176 productive pilot system which equip the chemical purification technique of medical treatment level and proved its capability. Possibilities to separate Zn-67 by the method of using the polarizing light in principle and to separate Zn-70 by the method of using the double optical pumping in theory were also proved. RI target production technologies are recognized excessively with monopolistic techniques of part atomic energy advanced nations such as Russia and US and they are come, but we prepared the opportunity will be able to complete a full cycle of like (RI material production -> RI target production -> RI application) with this project accomplishment. When considering only the direct demand of stable isotope which is used in various industrial, we forecast with the fact that RI target markets will become larger with the approximately 5 billion dollars in 2020 and this technology will contribute in the domestic rising industry creation with high value added

Development of waste unit for use in shallow land burial

International Nuclear Information System (INIS)

Brodersen, K.

1986-01-01

A hexagonal waste unit has been developed for use in shallow land burial of low- and medium-level radioactive waste. The waste units used as overpack on empty standard 210 1 drums have been tested for tightness and mechanical resistance. Experimental burial of 21 empty full-size units has demonstrated the emplacement of the containers and the sealing of the crevises between them with molten bitumen. The development of the experimental burial with time is being followed. Three different conceptual designs for advanced burial systems using the hexagonal standard units are described. The outer barrier is a thick concrete structure covered by 2, 10 or 20 m soil, respectively. The waste units were cast from a normal high-quality concrete as well as from Densit, a new, very strong and impermeable type of concrete prepared by the combined use of silica-fume (microsilica) and a superplastizicer as additives. The migration of Cl - , Cs + and tritiated water was found to be much slower in Densit than in normal concrete. In combination with leaching measurements for Cs + from the same materials the results are used to present some theoretical considerations concerning transport through solution-filled pore systems as dependent on pore-size distribution, tortuosity, etc. A method based on neutron-activated cement cast in form of thin plates has been developed and used to study the dissolution chemistry of concrete. A preliminary model is presented. Indications for precipitation mechanisms were obtained. Densit was demonstrated to ensure a high degree of corrosion protection for steel reinforcement. The reason is mainly the high electrical resistivity combined with low diffusive transport in the material. The pozzolanic reaction results in somewhat lower pH in the pore water than in normal concrete, but the effect is not so pronounced that the passivation of steel reinforcement is endangered

Lost productivity due to premature mortality in developed and emerging countries: an application to smoking cessation.

Science.gov (United States)

Menzin, Joseph; Marton, Jeno P; Menzin, Jordan A; Willke, Richard J; Woodward, Rebecca M; Federico, Victoria

2012-06-25

Researchers and policy makers have determined that accounting for productivity costs, or "indirect costs," may be as important as including direct medical expenditures when evaluating the societal value of health interventions. These costs are also important when estimating the global burden of disease. The estimation of indirect costs is commonly done on a country-specific basis. However, there are few studies that evaluate indirect costs across countries using a consistent methodology. Using the human capital approach, we developed a model that estimates productivity costs as the present value of lifetime earnings (PVLE) lost due to premature mortality. Applying this methodology, the model estimates productivity costs for 29 selected countries, both developed and emerging. We also provide an illustration of how the inclusion of productivity costs contributes to an analysis of the societal burden of smoking. A sensitivity analysis is undertaken to assess productivity costs on the basis of the friction cost approach. PVLE estimates were higher for certain subpopulations, such as men, younger people, and people in developed countries. In the case study, productivity cost estimates from our model showed that productivity loss was a substantial share of the total cost burden of premature mortality due to smoking, accounting for over 75 % of total lifetime costs in the United States and 67 % of total lifetime costs in Brazil. Productivity costs were much lower using the friction cost approach among those of working age. Our PVLE model is a novel tool allowing researchers to incorporate the value of lost productivity due to premature mortality into economic analyses of treatments for diseases or health interventions. We provide PVLE estimates for a number of emerging and developed countries. Including productivity costs in a health economics study allows for a more comprehensive analysis, and, as demonstrated by our illustration, can have important effects on the

Developing a Support Tool for Global Product Development Decisions

DEFF Research Database (Denmark)

Søndergaard, Erik Stefan; Ahmed-Kristensen, Saeema

2016-01-01

This paper investigates how global product development decisions are made through a multiple-case study in three Danish engineering. The paper identifies which information and methods are applied for making decisions and how decision-making can be supported based on previous experience. The paper...... presents results from 51 decisions made in the three companies, and based on the results of the studies a framework for a decision-support tool is outlined and discussed. The paper rounds off with an identification of future research opportunities in the area of global product development and decision-making....

Popular product development: strategy, innovation and decision making

Directory of Open Access Journals (Sweden)

Maria Cecília Sobral

2007-09-01

Full Text Available This work studies the decision process involved in the development of a popular product in Brazil for a multinational company. The method was case study. The product was launched in the market at the end of 2003, being the first popular product of the company in the world. Some interesting points of this study: a The importance of the new market (the bottom of income pyramid to the company; b The development of a product specifically addressed to the needs of this market with a totally customized solution; c The decision of a new product platform development.

Shouldn’t customers control customized product development

NARCIS (Netherlands)

Smets, L.P.M.; Langerak, F.; Rijsdijk, S.A.

2013-01-01

Nowadays, customized product development (CPD) is increasingly prevalent in business-to-business settings, which has motivated manufacturers into development approaches wherein the customer plays an active role. When the customer is merely viewed as a passive receiver of the customized product, the

Parallel Development of Products and New Business Models

OpenAIRE

Lund, Morten; Hansen, Poul H. Kyvsgård

2014-01-01

The perception of product development and the practical execution of product development in professional organizations have undergone dramatic changes in recent years. Many of these chances relate to introduction of broader and more cross-disciplinary views that involves new organizational functions and new concepts. These chances can be captured in various generations of practice. This paper will discuss the recent development of 3rd generation product development process models and the emer...

Impact of the Gulf of California SST on simulating precipitation and crop productivity in the Southwestern United States

Science.gov (United States)

Kim, S.; Kim, J.; Prasad, A. K.; Stack, D. H.; El-Askary, H. M.; Kafatos, M.

2012-12-01

Like other ecosystems, agricultural productivity is substantially affected by climate factors. Therefore, accurate climatic data (i.e. precipitation, temperature, and radiation) is crucial to simulating crop yields. In order to understand and anticipate climate change and its impacts on agricultural productivity in the Southwestern United States, the WRF regional climate model (RCM) and the Agricultural Production Systems sIMulator (APSIM) were employed for simulating crop production. 19 years of WRF RCM output show that there is a strong dry bias during the warm season, especially in Arizona. Consequently, the APSIM crop model indicates very low crop yields in this region. We suspect that the coarse resolution of reanalysis data could not resolve the relatively warm Sea Surface Temperature (SST) in the Gulf of California (GC), causing the SST to be up to 10 degrees lower than the climatology. In the Southwestern United States, a significant amount of precipitation is associated with North American Monsoon (NAM). During the monsoon season, the low-level moisture is advected to the Southwestern United States via the GC, which is known to be the dominant moisture source. Thus, high-resolution SST data in the GC is required for RCM simulations to accurately represent a reasonable amount of precipitation in the region, allowing reliable evaluation of the impacts on regional ecosystems.and evaluate impacts on regional ecosystems. To evaluate the influence of SST on agriculture in the Southwestern U.S., two sets of numerical simulations were constructed: a control, using unresolved SST of GC, and daily updated SST data from the MODIS satellite sensor. The meteorological drivers from each of the 6 year RCM runs were provided as input to the APSIM model to determine the crop yield. Analyses of the simulated crop production, and the interannual variation of the meteorological drivers, demonstrate the influence of SST on crop yields in the Southwestern United States.

Genetic Algorithms for Development of New Financial Products

Directory of Open Access Journals (Sweden)

Eder Oliveira Abensur

2007-06-01

Full Text Available New Product Development (NPD is recognized as a fundamental activity that has a relevant impact on the performance of companies. Despite the relevance of the financial market there is a lack of work on new financial product development. The aim of this research is to propose the use of Genetic Algorithms (GA as an alternative procedure for evaluating the most favorable combination of variables for the product launch. The paper focuses on: (i determining the essential variables of the financial product studied (investment fund; (ii determining how to evaluate the success of a new investment fund launch and (iii how GA can be applied to the financial product development problem. The proposed framework was tested using 4 years of real data from the Brazilian financial market and the results suggest that this is an innovative development methodology and useful for designing complex financial products with many attributes.

Analysis of group and financial evaluation of productive units of bulb onion (Allium cepa L. in the District of Irrigation of Alto Chicamocha (Boyacá-Colombia

Directory of Open Access Journals (Sweden)

Nancy Cristina Sanabria Neira

2014-05-01

Full Text Available In Colombia the cultivation of bulb onion (Allium cepa L is a major generator of incomes and handwork for small growers in the departments of Boyacá, Nariño and Cundinamarca. Its production is 320,000 t year-1, of which 185,000 t (58 % are produced by the department of Boyacá, becoming the first producer at national level. The Irrigation District of the Alto Chicamocha (Drach produces between 35,000 to 40,000 t, i.e. 12.5 % of the national volume and 21.62 % of the departmental one, this productive line is most relevant in the influence area of the district and it is the main source of income and employment both direct and indirect. It was used the methodology of group analysis to develop the general objective of this research to determine the profitability in the different units; information was collected on primary sources such as: social relations, cost structures, aspects of technical and administrative management, as well as the productivity gained. It was found three groups of profitability of the different units: head, medium and tail. It was concluded that the production costs of the onion bulb are classified in explicit (handwork,inputs, services, and others and implicit (family work, lease, depreciation and capital income. It is proposed to the owners of the production units of the cola group, the optimization of irrigation, the appropriate use of agrochemicals and the implementation of appropriate cultural practices.

Corn Production and Marketing. An Instructional Unit for Teachers of Adult Vocational Education in Agriculture.

Science.gov (United States)

Grace, Clyde, Jr.; Iverson, Maynard J.

The instructional unit designed to develop the effective ability of farmers to produce, harvest, store, and market corn profitably is structured in 11 lessons. The unit was developed as a guide for use by teachers in planning and conducting young farmer or adult farmer classes. The specific topic areas include varieties of corn, principles of…

Concurrent Engineering in seafood product development

DEFF Research Database (Denmark)

Jonsdottir, Stella; Vesterager, Johan; Børresen, Torger

1998-01-01

benefit from the CE approach which can support product developers to provide concurrent specifications for raw materials, ingredients, packaging, and production methods. The approach involves the use of product models from which line extensions are more easily generated than by use of customary stepwise...... techniques. it is anticipated that other food industries also can benefit from the more simultaneous approach...

Automated cleaning of fan coil units with a natural detergent-disinfectant product

Directory of Open Access Journals (Sweden)

Di Onofrio Valeria

2010-10-01

Full Text Available Abstract Background Air conditioning systems represent one important source of microbial pollutants for indoor air. In the past few years, numerous strategies have been conceived to reduce the contamination of air conditioners, mainly in hospital settings. The biocidal detergent BATT2 represents a natural product obtained through extraction from brown seaweeds, that has been tested previously on multidrug-resistant microorganisms. Methods BATT2 has been utilized for the disinfection of fan coil units from four air conditioning systems located in hospital environments with a mean degree of risk. Samples were collected from the air supplied by the conditioning systems and from the surfaces of fan coil units, before and after sanitization procedures. Total microbial counts at 37°C and 22°C and mycotic count at 32°C were evaluated. Staphylococci and Pseudomonas aeruginosa were also detected on surfaces samples. Results The biodetergent was able to reduce up 50% of the microbial pollution of fan coil units surfaces and air supplied by the air conditioners. Conclusions BATT2 could be considered for cleaning/disinfection of air conditioning systems, that should be performed on the basis of accurate and verifiable sanitization protocols.

Sustainable Industrial Product Systems. Integration of Life Cycle Assessment in Product development and Optimization of Product Systems

Energy Technology Data Exchange (ETDEWEB)

Hanssen, Ole Joergen

1997-12-31

This thesis contributes to the development and testing of environmental life cycle assessment (LCA) in product development and management in industry. It is based on systems theory and systems engineering. It develops a method for sustainable product development that has been successfully tested in the Nordic project called NEP. The LCA method is also a basis for an optimization model, where life cycle economy and environmental impacts from product systems are optimized with a non-linear model. A more complete mathematical model for LCA, based on the functional requirements on a product system, is also developed. The statistical properties of emission factors are studied using a data set from the Swedish Kraft Mill industry. It is shown that emission factors may be assumed constants in the LCA model, but with rather large variations within a population of Kraft mills. It is shown that there are a few environmental impacts which are important for most types of products under Scandinavian conditions, especially global warming potential, acidification, human toxicity and fossil energy depletion. There are significant differences between the contribution to these impacts from different life cycle stages, where raw material processing and use of products are generally more important than the other stages. Test cases indicate that there are no large conflicts between improvements in environmental impacts and customer requirements. Environmental improvements seem to increase purchase cost of products in some cases, but the life cycle cost of the products seem in most cases to be reduced. It is concluded that there are opportunities for 30-50% improvements in product system, based on relatively simple modifications of the systems. 246 refs., 63 figs., 19 tabs.

The design and development of a solar tracking unit

Science.gov (United States)

Jones, I. W.; Miller, J. B.

1984-01-01

The solar tracking unit was developed to support the Laser Heterodyne Spectrometer (LHS) airborne instrument, but has application to a general class of airborne solar occultation research instruments. The unit consists of a mirror mounted on two gimbals, one of which is hollow. The mirror reflects a 7.6 cm (3.0 in.) diameter beam of sunlight through the hollow gimbal into the research instrument optical axis. A portion of the reflected sunlight is directed into a tracking telescope which uses a four quadrant silicon detector to produce the servo error signals. The colinearity of the tracker output beam and the research instrument optical axis is maintained to better than + or - 1 arc-minute. The unit is microcomputer controlled and is capable of stand alone operation, including automatic Sun acquisition or operation under the control of the research instrument.

The Significance of Consumer’s Awareness about Organic Food Products in the United Arab Emirates

Directory of Open Access Journals (Sweden)

Safdar Muhummad

2016-08-01

Full Text Available Awareness about negative externalities generated by conventional farming is gaining momentum with consumers around the world, opting for alternatively, namely organically, produced food products. Information about consumers’ awareness is an essential element for farmers and marketing agencies to successfully plan production that can capture a greater market share. This study discusses effective factors influencing consumers’ awareness about the benefits of organic food in the United Arab Emirates. Sample data and ordinary least square (OLS regression techniques are applied to delineate factors influencing consumers’ awareness about organic food. The results from this regression analysis highlight the importance of specific socioeconomic determinants that change awareness about organic food products in United Arab Emirates (UAE households. This study finds that awareness about organic food is influenced more effective factors such as gender, nationality, and education as well as income, occupation and age. These research findings apply to other economies and societies that have an increasing per capita spending on organic food, but also where people are highly sensitive to information provided about organic food. Therefore, these results are important to these research beneficiaries including food marketing planners, researchers, and agricultural and food policy makers.

The Use of Lean Production Techniques as the Basis of Innovative Development of Region

Directory of Open Access Journals (Sweden)

Sergey G. Tyaglov

2017-06-01

Full Text Available In article methods, the principles and the main tools of technology of "economical production" are investigated. The possibility of application of "the concept the economical region" at the level of regional economies is analyzed. In the conditions of the policy of import substitution realized now in Russia, economical technologies, in our opinion, need to be considered as a basis of further innovative development of regions. Recently the philosophy of "economical production" which arose in Japan actively takes root the management of the Russian enterprises which treat, in particular such large organizations as: LLC Gazpromneft-Khantos, PJSC Rosneft, PJSC Sberbank, PJSC Gorky Automobile Plant, RUSAL United company, PJSC Kamaz, etc. The philosophy of "economical production" is implemented by means of certain tools and the principles. Treat the basic principles of economical technologies: probe of the existing losses, drop of negative consequences from the found losses by special methods and tools, and also monitoring of efficiency of functioning of system in general. The traditional tools used in the course of "economical production" are: mapping of a stream of creation of value, the 5S system, kaizen, visual management, the standardized operational instructions, kanban, bystry readjustment, general care of the equipment, "the extending production", etc. Use of the principles and instruments of "economical production" in business management and the region allows to increase many times their general competitiveness and to provide transition of regional economy to new qualitative level. In this regard, the question of whether technologies of "economical production" the main of innovative development of regions are becomes very urgent.

Evaluating the Potential of Marginal Land for Cellulosic Feedstock Production and Carbon Sequestration in the United States.

Science.gov (United States)

Emery, Isaac; Mueller, Steffen; Qin, Zhangcai; Dunn, Jennifer B

2017-01-03

Land availability for growing feedstocks at scale is a crucial concern for the bioenergy industry. Feedstock production on land not well-suited to growing conventional crops, or marginal land, is often promoted as ideal, although there is a poor understanding of the qualities, quantity, and distribution of marginal lands in the United States. We examine the spatial distribution of land complying with several key marginal land definitions at the United States county, agro-ecological zone, and national scales, and compare the ability of both marginal land and land cover data sets to identify regions for feedstock production. We conclude that very few land parcels comply with multiple definitions of marginal land. Furthermore, to examine possible carbon-flow implications of feedstock production on land that could be considered marginal per multiple definitions, we model soil carbon changes upon transitions from marginal cropland, grassland, and cropland-pastureland to switchgrass production for three marginal land-rich counties. Our findings suggest that total soil organic carbon changes per county are small, and generally positive, and can influence life-cycle greenhouse gas emissions of switchgrass ethanol.

Is the Human Development Index (HDI) of the United Nations ...

African Journals Online (AJOL)

Is the Human Development Index (HDI) of the United Nations Development Programme (UNDP) a relevant indicator? Jean Claude Saha. Abstract. No Abstract. African Journal of Economic Policy Vol. 12(1) 2005: 1-27. Full Text: EMAIL FULL TEXT EMAIL FULL TEXT · DOWNLOAD FULL TEXT DOWNLOAD FULL TEXT.

Developing and improving human capital and productivity in public companies

Directory of Open Access Journals (Sweden)

Nozipho Sithole

2016-08-01

Full Text Available This article assesses the impact of the Assisted Education Programme (AEP in developing, improving human capital and productivity specifically for eThekwini Municipality employee human resource. This programme offers funding to employees to further their studies in higher learning institutions, which are in partnership with and recognized by eThekwini Municipality. The core function of this programme is to improve and develop employee capabilities in order to enhance municipal productivity. However, different factors have prohibited the programme from reaching required funding polity objectives. Participants filled in questionnaires and from them data were collected. The study used quantitative research as a method of research. The target population for this study consisted of 100 participants. The study sample size were 64 participants which were randomly selected out of the Durban Solid Waste Unit, specifically general assistants. The study analyzed data using SPSS (version 23.0. A significant percentage of respondents indicated to a lack of transparency and poor consistency in the process of awarding the funding and to insufficient information, which detailed the criteria for eligibility of applicants. Henceforth, the study concluded that municipal employee underutilized the AEP because of being ill informed about it. This resulted in the employee perception that the programme had little or no benefit to them and that it had no value in improving their human capital development. This finding is shown by a Chi-square goodness of fit test to be statistically significant (std=1.49150; mean=2.7500; p=.000

Market Dynamics and Productivity in Developing Countries ...

International Development Research Centre (IDRC) Digital Library (Canada)

25 nov. 2009 ... Market Dynamics and Productivity in Developing Countries : Economic Reforms in the Middle East and North Africa. Book cover Market Dynamics and Productivity in Developing Countries: Economic Reforms in the Middle East. Directeur(s):. Khalid Sekkat. Maison(s) d'édition: Springer, CDRI. 25 novembre ...

Increasing plant density in eastern United States broccoli production systems to maximize marketable head yields

Science.gov (United States)

Increased demand for fresh market broccoli (Brassica oleracea L. var. italica) has led to increased production along the eastern seaboard of the United States. Maximizing broccoli yields is a primary concern for quickly expanding eastern commercial markets. Thus, a plant density study was carried ...

A paradigm shift needed for nuclear reactors. From economies of unit scale to economies of production scale

International Nuclear Information System (INIS)

Li, Ning

2009-01-01

The success and sustainability of the nascent 'Nuclear Renaissance' will depend heavily on the timely development and deployment SMRs (small and modular reactors) as a new paradigm to increase economic competitiveness and broaden markets and applications for nuclear energy. A critical assessment of the historical and current reactor construction cost data reveals a troubling trend of rapid escalation in practically all countries, while showing little or negative economies of (unit) scale. The escalation cannot be fully accounted for by cost inflation in materials and labors, or by ratcheting regulations and other external factors. Rather, it appears that the intrinsic complexity and the associated risks and costs of extremely large systems have offset all returns of (unit) scale in power engineering and learning effects in practice. The construction heavy nature of the nuclear power plants exacerbates the cost problem as compared to that of the manufactured goods. The power markets have evolved away from the very large monolithic generation units toward modular units more amenable for manufacturing and transportation. This is clearly illustrated through the increasingly bi-modal distribution of generation units around a few MWe (wind, micro-turbines etc) and 100-200 MWe (gas turbine and combined cycle). The rapid market adoption and penetration of these units dwarf the addition rates of the very large units. This is not merely an outcome based on economic and financial risk reduction (important in their own right) or better match of applications - the technological and operational performances are equal or even superior in these smaller modular units. This presentation will use the industry, market and application data analyses, and successful examples from other sectors and industries with different organizing principles to demonstrate the benefits and potentials of SMRs. The resultant paradigm shift, from the singular pursuit of economies of unit scale to

Metric integration architecture for product development

Science.gov (United States)

Sieger, David B.

1997-06-01

Present-day product development endeavors utilize the concurrent engineering philosophy as a logical means for incorporating a variety of viewpoints into the design of products. Since this approach provides no explicit procedural provisions, it is necessary to establish at least a mental coupling with a known design process model. The central feature of all such models is the management and transformation of information. While these models assist in structuring the design process, characterizing the basic flow of operations that are involved, they provide no guidance facilities. The significance of this feature, and the role it plays in the time required to develop products, is increasing in importance due to the inherent process dynamics, system/component complexities, and competitive forces. The methodology presented in this paper involves the use of a hierarchical system structure, discrete event system specification (DEVS), and multidimensional state variable based metrics. This approach is unique in its capability to quantify designer's actions throughout product development, provide recommendations about subsequent activity selection, and coordinate distributed activities of designers and/or design teams across all design stages. Conceptual design tool implementation results are used to demonstrate the utility of this technique in improving the incremental decision making process.

Consumer orientation of product developers and their product perception compared to that of consumers

NARCIS (Netherlands)

Sijtsema, S.J.; Backus, G.B.C.; Linnemann, A.R.; Jongen, W.M.F.

2004-01-01

This research concludes that although product developers (58, response rate 35%) and consumers (344, response rate 57%) perceive health and its relation to product characteristics in the same way, the perception of product developers is more extreme. Furthermore, factor analysis reveals four

Exploring purchasing involvement in product development

NARCIS (Netherlands)

Wynstra, J.Y.F.; Weggeman, M.C.D.P.; Weele, van A.J.

2003-01-01

With increasing outsourcing and the growing importance of product innovation as a means for creating competitive advantage, the integration of purchasing and product development processes has become a key issue for many firms. Although, consequently, the integration of purchasing and suppliers in

The status of radioactive waste repository development in the United States - December 2011

International Nuclear Information System (INIS)

Hill, David R.

2012-01-01

The current state of affairs concerning development in the United States of a permanent repository for disposal of spent nuclear fuel (SNF) and high-level radioactive waste (HLW) is, in a word, uncertain. The President of the United States has asserted that he believes licensing and development of the Yucca Mountain repository should be abandoned, while other important parties believe licensing and development should continue. And not surprisingly, there is a disagreement as to what the law requires and whether the licensing process for the Yucca Mountain repository can be terminated at this point, even if the President would like for that to happen. The future of Yucca Mountain, and the future of radioactive waste disposal in the United States generally, currently are pending before the US Court of Appeals for the District of Columbia Circuit, and eventually the Supreme Court of the United States may decide some of the important legal issues concerning Yucca Mountain's future. The November 2012 US elections also likely will have a significant impact on future radioactive waste repository development

State-Specific Prevalence of Tobacco Product Use Among Adults - United States, 2014-2015.

Science.gov (United States)

Odani, Satomi; Armour, Brian S; Graffunder, Corinne M; Willis, Gordon; Hartman, Anne M; Agaku, Israel T

2018-01-26

Despite recent declines in cigarette smoking prevalence, the tobacco product landscape has shifted to include emerging tobacco products* (1,2). Previous research has documented adult use of smokeless tobacco and cigarettes by state (3); however, state-specific data on other tobacco products are limited. To assess tobacco product use in the 50 U.S. states and the District of Columbia (DC), CDC and the National Cancer Institute analyzed self-reported use of six tobacco product types: cigarettes, cigars, regular pipes, water pipes, electronic cigarettes (e-cigarettes), and smokeless tobacco products among adults aged ≥18 years using data from the 2014-2015 Tobacco Use Supplement to the Current Population Survey (TUS-CPS). Prevalence of ever-use of any tobacco product ranged from 27.0% (Utah) to 55.4% (Wyoming). Current (every day or some days) use of any tobacco product ranged from 10.2% (California) to 27.7% (Wyoming). Cigarettes were the most common currently used tobacco product in all states and DC. Among current cigarette smokers, the proportion who currently used one or more other tobacco products ranged from 11.5% (Delaware) to 32.3% (Oregon). Differences in tobacco product use across states underscore the importance of implementing proven population-level strategies to reduce tobacco use and expanding these strategies to cover all forms of tobacco marketed in the United States. Such strategies could include comprehensive smoke-free policies, tobacco product price increases, anti-tobacco mass media campaigns, and barrier-free access to clinical smoking cessation resources (1,4).

Challenges and status of multi-unit PSA development in Canada

International Nuclear Information System (INIS)

Yalaoui, Smain

2015-01-01

Firstly, this paper discusses the issues and challenges related to the development of a Multi-Unit PSA (MU-PSA) and the general recommendations and conclusions from the MU-PSA Workshop organized by the CNSC in Ottawa, November 2014. This includes a discussion regarding the issue related to the methodological challenges in performing MU-PSA, the site-based risk metrics to be adopted, and the issue of risk aggregation across all hazards and all units. The paper also addresses the challenges for establishing site-based safety goals as the current safety goals were established on a per-unit basis. CNSC Staff efforts, both at the national and international level, on developing whole-site safety goals and guidance on MU-PSA and risk aggregation methodologies will also be discussed. Finally, the paper will provide a summary of the industry effort and road map for completing the pilot Whole-site PSA project for the Pickering Nuclear Generating Station, as requested by the Commission following to the public hearing for licence renewal in February 20 and May 29-31, 2013. (author)

NSP Production Reports

Data.gov (United States)

Department of Housing and Urban Development — NSP Production Reports contain cumulative data on units assisted with NSP funds. An NSP grantee reports on the accomplishment of an activity when it meets an End...

Development Labs: University Knowledge Production and Global Poverty

Science.gov (United States)

Collins, Christopher S.

2017-01-01

In 2012, the United States Agency for International Development allocated $137 million to fund seven universities to create "development labs" to advance social/economic progress and reduce poverty. International economic development has become a booming field and industry but is also highly contested. The function of the university as a…

Tobacco-Product Use by Adults and Youths in the United States in 2013 and 2014.

Science.gov (United States)

Kasza, Karin A; Ambrose, Bridget K; Conway, Kevin P; Borek, Nicolette; Taylor, Kristie; Goniewicz, Maciej L; Cummings, K Michael; Sharma, Eva; Pearson, Jennifer L; Green, Victoria R; Kaufman, Annette R; Bansal-Travers, Maansi; Travers, Mark J; Kwan, Jonathan; Tworek, Cindy; Cheng, Yu-Ching; Yang, Ling; Pharris-Ciurej, Nikolas; van Bemmel, Dana M; Backinger, Cathy L; Compton, Wilson M; Hyland, Andrew J

2017-01-26

Noncigarette tobacco products are evolving rapidly, with increasing popularity in the United States. We present prevalence estimates for 12 types of tobacco products, using data from 45,971 adult and youth participants (≥12 years of age) from Wave 1 (September 2013 through December 2014) of the Population Assessment of Tobacco and Health (PATH) Study, a large, nationally representative, longitudinal study of tobacco use and health in the United States. Participants were asked about their use of cigarettes, e-cigarettes, traditional cigars, cigarillos, filtered cigars, pipe tobacco, hookah, snus pouches, other smokeless tobacco, dissolvable tobacco, bidis, and kreteks. Estimates of the prevalence of use for each product were determined according to use category (e.g., current use or use in the previous 30 days) and demographic subgroup, and the prevalence of multiple-product use was explored. More than a quarter (27.6%) of adults were current users of at least one type of tobacco product in 2013 and 2014, although the prevalence varied depending on use category. A total of 8.9% of youths had used a tobacco product in the previous 30 days; 1.6% of youths were daily users. Approximately 40% of tobacco users, adults and youths alike, used multiple tobacco products; cigarettes plus e-cigarettes was the most common combination. Young adults (18 to 24 years of age), male adults and youths, members of racial minorities, and members of sexual minorities generally had higher use of tobacco than their counterparts. During this study, 28% of U.S. adults were current users of tobacco, and 9% of youths had used tobacco in the previous 30 days. Use of multiple products was common among tobacco users. These findings will serve as baseline data to examine between-person differences and within-person changes over time in the use of tobacco products. (Funded by the National Institute on Drug Abuse and the Food and Drug Administration.).

THE METHODOLOGY OF DEVELOPING VALUE INDICATORS TO INTEGRALLY ASSESS RESOURCE POTENTIAL IN AGRICULTURAL UNITS

Directory of Open Access Journals (Sweden)

Elena TIMOFTI

2014-06-01

Full Text Available The problem of increasing the economic efficiency of resource use in agricultural production is very important. Its solution directly depends on the economic security of the country and its constant supply with agricultural products.There are three basic factors in agricultural production: nature (land, labour and capital, which have differentmeasure units. Comparability is necessary to express the value of the integral potential that gives the possibility totake into account the main resources involved in producing and obtaining results from the agricultural sector.

Improving Productivity via QWL Centers.

Science.gov (United States)

Bentley, Marion T.; Hansen, Gary B.

1980-01-01

Gives a brief history of productivity improvement legislation in the United States and of the development and demise of the National Center for Productivity and Quality of Working Life (QWL). Describes existing productivity and QWL centers, including their locations, scope, services, and activities, and urges greater support at the federal level.…

[Example of product development by industry and research solidarity].

Science.gov (United States)

Seki, Masayoshi

2014-01-01

When the industrial firms develop the product, the research result from research institutions is used or to reflect the ideas from users on the developed product would be significant in order to improve the product. To state the software product which developed jointly as an example to describe the adopted development technique and its result, and to consider the modality of the industry solidarity seen from the company side and joint development. The software development methods have the merit and demerit and necessary to choose the optimal development technique by the system which develops. We have been jointly developed the dose distribution browsing software. As the software development method, we adopted the prototype model. In order to display the dose distribution information, it is necessary to load four objects which are CT-Image, Structure Set, RT-Plan, and RT-Dose, are displayed in a composite manner. The prototype model which is the development technique was adopted by this joint development was optimal especially to develop the dose distribution browsing software. In a prototype model, since the detail design was created based on the program source code after the program was finally completed, there was merit on the period shortening of document written and consist in design and implementation. This software eventually opened to the public as an open source. Based on this developed prototype software, the release version of the dose distribution browsing software was developed. Developing this type of novelty software, it normally takes two to three years, but since the joint development was adopted, it shortens the development period to one year. Shortening the development period was able to hold down to the minimum development cost for a company and thus, this will be reflected to the product price. The specialists make requests on the product from user's point of view are important, but increase in specialists as professionals for product

Reference model for apparel product development

Directory of Open Access Journals (Sweden)

Isabel Cristina Moretti

2017-03-01

Full Text Available The purpose of this paper was to develop a reference model for the implementation of the process of product development (PDP for apparel. The tool was developed through an interactive process of comparison between theoretical. Managers in companies and professionals working in this market can utilize the reference model as a source for the organization and improvement of the PDP for apparel and the universities as a reference source for systematized teaching of this process. This model represents the first comprehensive attempt to develop an instrument at a detailed level (macro phases, phases, activities, inputs and outputs at each stage and at the gates to systematize the PDP process for fashion products and to consider its particularities.

Conditions and strategies for integrating ergonomics into product development

DEFF Research Database (Denmark)

Broberg, Ole

1996-01-01

Ergonomics considerations at the stage of product development in industry is a major strategy for prevention of work-related injuries and illnesses among employees at the time of manufacture of new products. This study elucidates some important conditions and possibilities for integrating...... such considerations during the product development process. Special attention is paid to the role of design and production engineers. Based on different understandings of the product development process four approaches to integration of ergonomics are outlined....

78 FR 18234 - Service of Process on Manufacturers; Manufacturers Importing Electronic Products Into the United...

Science.gov (United States)

2013-03-26

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration 21 CFR Part 1005 [Docket No. FDA-2007-N-0091; (formerly 2007N-0104)] Service of Process on Manufacturers; Manufacturers Importing Electronic Products Into the United States; Agent Designation; Change of Address AGENCY: Food and Drug...

AREAS FOR INNOVATIVE PRODUCTS IMPLEMENTATION IN THE INSURANCE MARKET OF UKRAINE

Directory of Open Access Journals (Sweden)

Diana Tretiak

2017-11-01

Full Text Available The aim of the article is to assess the prospects for the implementation of the investment life insurance in Ukraine. The study analysed the experience of foreign countries in the investment life insurance market development. Also, an analysis of existing definitions for the "unit-linked" term is carried out; the result is the conclusion that they are limited to only a descriptive characteristic that relates to a particular aspect of the product. Upon that, a comprehensive definition is absent at all now. Methods. The study is based on a comparison of "unitlinked" products with the traditional life insurance, which exist in the world practice. Practical importance. Increase in the inflow of long-term resources in the Ukrainian economy through the implementation of an innovative unitlinked product. Transformation of the life insurance industry into the high-margin business sphere in Ukraine. Importance/originality. A technique of constructing an innovative unit-linked product depending on the specifics of the domestic insurance market performance is developed. Results. The article considers in depth the specific features of unit-linked products, which distinguish this life insurance type from the classic accumulative insurance. In addition, it highlights other important characteristics such as a high level of flexibility and transparency of all the components. Also, the advantages and disadvantages of unit-linked products are considered as compared to alternative products, its classification is held for the selected parameter group. The estimations of the unit-linked product development prospects, as well as its influence on the growth of the insurance market, are made. The study justifies the legislative consolidation of the investment life insurance along with a number of expansionary measures successfully implemented in Eastern European countries, which are similar to Ukraine. The result within the framework of this direction is the

Process development for fabrication of Ag-15% In-5% Cd alloys and rods for the control rods of IPEN critical unit

International Nuclear Information System (INIS)

Figueredo, A.M. de.

1985-12-01

The development of two process at the Nuclear and Energetic Research Institute (IPEN-Brazil) are described. - the production of Ag-15% In-5%. Cd alloys with nuclear grade. The fabrication of rods from Ag-15% In-5% Cd alloy for use at the critical unit. The methods for quality control of alloy and rod are presented, and main problems are identified. (C.G.C.)

Development and Application of a Low Impact Development (LID-Based District Unit Planning Model

Directory of Open Access Journals (Sweden)

Cheol Hee Son

2017-01-01

Full Text Available The purpose of this study was to develop a low impact development-based district unit planning (LID-DP model and to verify the model by applying it to a test site. To develop the model, we identified various barriers to the urban planning process and examined the advantages of various LID-related techniques to determine where in the urban development process LID would provide the greatest benefit. The resulting model provides (1 a set of district unit planning processes that consider LID standards and (2 a set of evaluation methods that measure the benefits of the LID-DP model over standard urban development practices. The developed LID-DP process is composed of status analysis, comprehensive analysis, basic plan, and sectoral plans. To determine whether the LID-DP model met the proposed LID targets, we applied the model to a test site in Cheongju City, Chungcheongbuk-do Province, Republic of Korea. The test simulation showed that the LID-DP plan reduced nonpoint source pollutants (total nitrogen, 113%; total phosphorous, 193%; and biological oxygen demand, 199%; reduced rainfall runoff (infiltration volume, 102%; surface runoff, 101%; and improved the conservation rate of the natural environment area (132%. The successful application of this model also lent support for the greater importance of non-structural techniques over structural techniques in urban planning when taking ecological factors into account.

Short lecture series in sustainable product development

DEFF Research Database (Denmark)

McAloone, Tim C.

2005-01-01

Three lectures in sustainable product development models, methods and mindsets should give insight into the way of thinking about the environment when developing products. The first two lectures will guide you through: . Environmental problems in industry & life-cycle thinking . Professional...... methods for analysing and changing products’ environmental profiles . Sustainability as a driver for innovation...

Adding to Product Development Theory - A Language Perspective

DEFF Research Database (Denmark)

Hansen, Poul H. Kyvsgård; Berg, Pekka; Mabogunje, Ade

2014-01-01

The paper explores the effect that the languages associated with the applied methods have on product development processes. Product development does increasingly involve more diverse disciplines and expanded cross-disciplinary views. Most importantly, the new disciplines: Design Thinking, and......, Innovation Management have introduced new cross-disciplinary methods and approaches. Some of the most important cognitive processes involved in product development: perceiving, meaning making, conceptualizing, communicating, and learning have been reframed and expanded as new disciplines have been introduced...... of these new languages reveals that the traditional methods applied in product development are highly influenced and limited by the languages that are traditionally associated with the application of these methods. Though language plays an important part in these essential processes it is rarely addressed...

Developing maintenance technologies for FBR's heat exchanger units by advanced laser processing

International Nuclear Information System (INIS)

Nishimura, Akihiko; Shimada, Yukihiro

2011-01-01

Laser processing technologies were developed for the purpose of maintenance of FBR's heat exchanger units. Ultrashort laser processing fabricated fiber Bragg grating sensor for seismic monitoring. Fiber laser welding with a newly developed robot system repair cracks on inner wall of heat exchanger tubes. Safety operation of the heat exchanger units will be improved by the advanced laser processing technologies. These technologies are expected to be applied to the maintenance for the next generation FBRs. (author)

Human resource development for uranium production cycle

International Nuclear Information System (INIS)

Ganguly, C.

2014-01-01

Nuclear fission energy is a viable option for meeting the ever increasing demand for electricity and high quality process heat in a safe, secured and sustainable manner with minimum carbon foot print and degradation of the environment. The growth of nuclear power has shifted from North America and Europe to Asia, mostly in China and India. Bangladesh, Vietnam, Indonesia, Malaysia and the United Arab Emirates are also in the process of launching nuclear power program. Natural uranium is the basic raw material for U-235 and Pu-239, the fuels for all operating and upcoming nuclear power reactors. The present generation of nuclear power reactors are mostly light water cooled and moderated reactor (LWR) and to a limited extent pressurized heavy water reactor (PHWR). The LWRs and PHWRs use low enriched uranium (LEU with around 5% U-235) and natural uranium as fuel in the form of high density UO_2 pellets. The uranium production cycle starts with uranium exploration and is followed by mining and milling to produce uranium ore concentrate, commonly known as yellow cake, and ends with mine and mill reclamation and remediation. Natural uranium and its daughter products, radium and radon, are radioactive and health hazardous to varying degrees. Hence, radiological safety is of paramount importance to uranium production cycle and there is a need to review and share best practices in this area. Human Resource Development (HRD) is yet another challenge as most of the experts in this area have retired and have not been replaced by younger generation because of the continuing lull in the uranium market. Besides, uranium geology, exploration, mining and milling do not form a part of the undergraduate or post graduate curriculum in most countries. Hence, the Technical Co-operation activities of the IAEA are required to be augmented and more country specific and regional training and workshop should be conducted at different universities with the involvement of international experts

Development of anti-counterfeit consumer product authentication system

Directory of Open Access Journals (Sweden)

Olena V. Narimanova

2015-06-01

Full Text Available Aim of the research is to develop an anti-counterfeit consumer product authentication system. The main requirements for this system are formulated, the choice of method of consumer product authentication is substantiated. The scheme of anti-counterfeit consumer product authentication system is developed basing on previously proposed method of checking the QR-code integrity and authenticity. The proposed within the system consumer product authentication technology is simple, economical for implementation, does not require the external changes of product packaging, does not affect existing production process. The technology can be recommended for the use to private businesses and government institutions that are interested in the security of their products from counterfeiting, as well as tracking and removing from circulation the counterfeit consumer products.

Maximizing light olefins production in fluid catalytic cracking (FCC) units; Maximizacao de olefinas leves em unidades de craqueamento catalitico fluido

Energy Technology Data Exchange (ETDEWEB)

Pimenta, Ricardo D.M.; Pinho, Andrea de Rezende [PETROBRAS, Rio de Janeiro, RJ (Brazil)

2004-07-01

The Fluid Catalytic Cracking (FCC) process is widely spread over the ten PETROBRAS refineries in its thirteen industrial units. The importance of the FCC process resides on its high gasoline output, being the main supplier of this important product to the system. Additionally, FCC process is the main source of light hydrocarbons in the LPG range, including light olefins. The increasing demand for ethylene, propylene and butylenes was encouraging to concentrate the research efforts on studies about alternatives for the traditional FCC process. In the present work, the proposals from main licensors (UOP, KBR, Stone and Webster) for a light-olefins-driven FCC process (Petrochemical FCC) will be compared. Furthermore, the catalytic route for light olefins production in FCC units is also described. An additive based on ZSM- 5 zeolite, which is produced following a PETROBRAS proprietary technology, is being largely applied into the catalyst inventories of all FCC units. An analysis of different scenarios was performed to estimate the maximum potential of light olefins production from the highest possible ZSM-5 additive usage. More specifically for the case of ethylene, which production is also boosted by the same type of additive, studies are being conducted with the objective of recovering it from a C2 stream using specific units to do the splitting (UPGR). The search for increasing light olefins production in the refining processes is in line with PETROBRAS strategic plan which targeted for the company a more intense activity in the Brazilian petrochemical market (author)

Implementation of a system of social accounting in the cooperative of agricultural production “Camilo Cienfuegos” and in the basic unit of cooperative production “Julian Alemán". Main results

Directory of Open Access Journals (Sweden)

Yamira Mirabal González

2014-12-01

• To determine the results of the implementation of the System of Social Accounting in the Cooperative of Agricultural Production “Camilo Cienfuegos” and in the Basic Unit of Cooperative Production “Julián Alemán”.    The main results of the investigation are centered in: Characterization of the administration of the Cooperative of Agricultural Production “Camilo Cienfuegos” and of the Basic Unit of Cooperative Production “Julián Alemán”, evaluation of the level of execution of a group of premises that you/they allow the implementation of the system and the results of the implementation of the System of Social Accounting in both cooperatives.

The independent nuclear state. The United States, Britain and the military atom

International Nuclear Information System (INIS)

Simpson, J.

1983-01-01

A chronological account and overview are presented of the 40-year history of British military research, development and production work in atomic energy. The United Kingdom's efforts in this field have always had close links with equivalent activities in the United States, and have often been conducted on a mutually co-operative basis. This book contains descriptions of the technical evolution of British nuclear weapon designs and production models, estimates of annual output figures for fissile material and weapon types, and indications of the nature of the weapon-testing programme. Decision-points are charted. The impact of the agreements with the United States, both upon weapon development and production programmes and upon stockpiling, is analysed, as well as their effects upon the nuclear submarine programme. The impact of later events upon Anglo-American relations is identified, together with the recent British attempts to move to a closer political association with Europe. The study concludes by evaluating the essential nature of four decades of United Kingdom military nuclear development, and identifying the practical limits imposed by past policies upon any attempt by a British government to implement a policy of unilateral nuclear disarmament. (author)

PDC Journeys to Product Analysis Development and Additive Manufacturing?

International Nuclear Information System (INIS)

Shalina Sheik Muhamad

2015-01-01

The technology for product development and manufacturing has gone through many advancements. It is widely recognised that it would provide competitive advantage for engineering organization in term of product development cycle, productivity, sustainability and efficiency. We begin by describing the general characteristic of design process that will need to be integrated in product life cycle management. In Nuclear Malaysia, especially in engineering design activities the majority have been using 3D modelling. This paper discusses on the current product design practiced in Nuclear Malaysia, new product development process and new manufacturing technique which is additive manufacturing. (author)

Towards Integrated Product and Package Development

OpenAIRE

Bramklev, Caroline

2007-01-01

The global company operates from a number of locations worldwide, resulting in implications for the transport, handling and storage of product and parts transported within the company as well as between the company divisions and suppliers and/or consumers. In these companies, the package becomes a frequently used object to complement product features and achieve an effective and efficient means of logistics. In this context, it is interesting to integrate package development in the product...

Development of an advanced continuous mild gasification process for the production of coproducts

Energy Technology Data Exchange (ETDEWEB)

Jha, M.C.; McCormick, R.L.; Hogsett, R.F.; Rowe, R.M.; Anast, K.R.

1991-12-01

This document describes the results of Task 4 under which a 50 pound/hour char-to-carbon (CTC) process research unit (PRU) was designed in the second half of 1989, with construction completed in June 1990. The CTC PRU at Golden was operated for nearly one year during which 35 runs were completed for a total of nearly 800 hours of operation. Char methanation and carbon production reactor development activities are detailed in this report, as well as the results of integrated runs of the CTC process. Evaluation of the process and the carbon product produced is also included. It was concluded that carbon could be produced from mild gasification char utilizing the CTC process. Char methanation and membrane separation steps performed reasonably well and can scaled up with confidence. However, the novel directly heated reactor system for methane cracking did not work satisfactorily due to materials of construction and heat transfer problems, which adversely affected the quantity and quality of the carbon product. Alternative reactor designs are recommended.

Lot-sizing for a single-stage single-product production system with rework of perishable production defectives

NARCIS (Netherlands)

Teunter, R.; Flapper, S.D.P.

2003-01-01

We consider a single-stage single-product production system. Produced units may be non-defective, reworkable defective, or non-reworkable defective. The system switches between production and rework. After producing a fixed number (N) of units, all reworkable defective units are reworked. Reworkable

Sustainability Assessment Model in Product Development

Science.gov (United States)

Turan, Faiz Mohd; Johan, Kartina; Nor, Nik Hisyamudin Muhd; Omar, Badrul

2017-08-01

Faster and more efficient development of innovative and sustainable products has become the focus for manufacturing companies in order to remain competitive in today’s technologically driven world. Design concept evaluation which is the end of conceptual design is one of the most critical decision points. It relates to the final success of product development, because poor criteria assessment in design concept evaluation can rarely compensated at the later stages. Furthermore, consumers, investors, shareholders and even competitors are basing their decisions on what to buy or invest in, from whom, and also on what company report, and sustainability is one of a critical component. In this research, a new methodology of sustainability assessment in product development for Malaysian industry has been developed using integration of green project management, new scale of “Weighting criteria” and Rough-Grey Analysis. This method will help design engineers to improve the effectiveness and objectivity of the sustainable design concept evaluation, enable them to make better-informed decisions before finalising their choice and consequently create value to the company or industry. The new framework is expected to provide an alternative to existing methods.

Support for Development of Electronics and Materials Technologies by the Governments of the United States, Japan, West Germany, France, and the United Kingdom.

Science.gov (United States)

General Accounting Office, Washington, DC.

The governments of the United States, Japan, West Germany, France, and the United Kingdom each have large research and development efforts involving government agencies, universities and industry. This document provides a comparative overview of policies and programs which contribute to the development of technologies in the general area of…

Theoretical Investigation of Combined Use of PSO, Tabu Search and Lagrangian Relaxation methods to solve the Unit Commitment Problem

Directory of Open Access Journals (Sweden)

Sahbi Marrouchi

2018-02-01

Full Text Available Solving the Unit Commitment problem (UCP optimizes the combination of production units operations and determines the appropriate operational scheduling of each production units to satisfy the expected consumption which varies from one day to one month. Besides, each production unit is conducted to constraints that render this problem complex, combinatorial and nonlinear. In this paper, we proposed a new strategy based on the combination three optimization methods: Tabu search, Particle swarm optimization and Lagrangian relaxation methods in order to develop a proper unit commitment scheduling of the production units while reducing the production cost during a definite period. The proposed strategy has been implemented on a the IEEE 9 bus test system containing 3 production unit and the results were promising compared to strategies based on meta-heuristic and deterministic methods.

Proper context: Comparison studies demonstrate that United States food-animal production antimicrobial uses have minimal impact on antimicrobial resistance

Science.gov (United States)

In the United States (US) it is estimated that food-animal production agriculture accounts for >70% of antimicrobial (AM) use leading to concerns that agricultural uses "substantially drive" antimicrobial resistance (AMR). Many studies report AMR in food-animal production settings without comparison...

Trends in radioisotope development and utilization in the United States

Energy Technology Data Exchange (ETDEWEB)

Mott, W E [Energy Research and Development Administration, Washington, D.C. (USA)

1976-06-01

The current trends in radioisotope and radiation technology in the United States are overviewed with emphasis on the developments since the 1973 Conference. The comments focus primarily on the research and development activities receiving the most attention today from the various agencies of the Government. Among the many available radionuclides, technetium-99m has played the single most important role for making possible the developments in the field of nuclear medicine. Many other short lived medium-lived nuclides are applied in the fields of nuclear medicine, cardiac pacemaker, artificial heart, and blood irradiator. Radiation processing is now firmly established in the United States. The trends in sewage treatment, polymer-impregnated materials, bioengineering, and food irradiation are reviewed. The programs for californium-252, strontium-90, cesium-137, plutonium-238, and krypton-85 are also reviewed. The author concludes this paper with the acknowledgement that Japanese researchers have contributed to and have been closely involved in many of the programs discussed. Of particular note is the participation in the clinical phase of the californium-252 radiotherapy program. Several Japanese hospitals have been cooperating with the United States since the very beginning of the californium-252 program in determining the value of the californium-252 neutron therapy. The research being performed is unique, and will contribute greatly to the decisions on the ultimate future of californium-252 for therapeutic purposes.

Nontraditional Use of Biomass at Certified Forest Management Units: Forest Biomass for Energy Production and Carbon Emissions Reduction in Indonesia

Directory of Open Access Journals (Sweden)

Asep S. Suntana

2012-01-01

Full Text Available Biomass conversion technologies that produce energy and reduce carbon emissions have become more feasible to develop. This paper analyzes the potential of converting biomass into biomethanol at forest management units experiencing three forest management practices (community-based forest management (CBFM, plantation forest (PF, and natural production forest (NPF. Dry aboveground biomass collected varied considerably: 0.26–2.16 Mg/ha/year (CBFM, 8.08–8.35 Mg/ha/year (NPF, and 36.48–63.55 Mg/ha/year (PF. If 5% of the biomass was shifted to produce biomethanol for electricity production, the NPF and PF could provide continuous power to 138 and 2,762 households, respectively. Dedicating 5% of the biomass was not a viable option from one CBFM unit. However, if all biomasses were converted, the CBFM could provide electricity to 19–27 households. If 100% biomass from two selected PF was dedicated to biomethanol production: (1 52,200–72,600 households could be provided electricity for one year; (2 142–285% of the electricity demand in Jambi province could be satisfied; (3 all gasoline consumed in Jambi, in 2009, would be replaced. The net carbon emissions avoided could vary from 323 to 8,503 Mg when biomethanol was substituted for the natural gas methanol in fuel cells and from 294 to 7,730 Mg when it was used as a gasoline substitute.

Design for Sustainability: Current Trends in Sustainable Product Design and Development

Directory of Open Access Journals (Sweden)

Marcel Crul

2009-08-01

Full Text Available The Design for Sustainability (D4S concept outlines methodologies for making sustainable improvements (social, economic and environmental to products by applying elements of life cycle thinking. D4S builds on the work of ecodesign to include economic and social concerns, and its methodology includes both incremental and radical innovation. The United Nations Environment Programme and the Delft University of Technology, the Netherlands, in concert with key partners, work to support, illustrate, and diffuse targeted D4S demonstration efforts, including the European Commission-funded Cleaner Production for Better Products project in Vietnam, that are needed to change unsustainable consumption and production patterns.

Performance Measurement in Global Product Development

DEFF Research Database (Denmark)

Taylor, Thomas Paul; Ahmed-Kristensen, Saeema

2013-01-01

there is a requirement for the process to be monitored and measured relative to the business strategy of an organisation. It was found that performance measurement is a process that helps achieve sustainable business success, encouraging a learning culture within organisations. To this day, much of the research into how...... performance is measured has focussed on the process of product development. However, exploration of performance measurement related to global product development is relatively unexplored and a need for further research is evident. This paper contributes towards understanding how performance is measured...

Development of Neutronics Model for ShinKori Unit 1 Simulator

Energy Technology Data Exchange (ETDEWEB)

Hong, JinHyuk; Lee, MyeongSoo; Lee, SeungHo; Suh, JungKwan; Hwang, DoHyun [KEPRI, Daejeon (Korea, Republic of)

2008-05-15

ShinKori-Unit 1 and 2 is being built in the Kori site which will be operated at 2815 MWt of thermal core power. The purpose of this paper is to report on the performance of the developed neutronics model of ShinKori Unit 1 and 2. Also this report includes the convenient tool (XS2R5) for processing the large quantity of information received from the DIT/ROCS model and generating cross-sections. The neutronics model is based on the NESTLE code inserted to RELAP5/MOD3 thermal-hydraulics analysis code which was funded as FY-93 LDRD Project 7201 and is running on the commercial simulator environment tool (the 3KeyMaster{sup TM} of the WSC). As some examples for the verification of the developed neutronics model, some figures are provided. The output of the developed neutronics model is in accord with the Preliminary Safety Analysis Report (PSAR) of the reference plant.

Industry Approach to Nutrition-Based Product Development and Reformulation in Asia.

Science.gov (United States)

Vlassopoulos, Antonis; Masset, Gabriel; Leroy, Fabienne; Spieldenner, Jörg

2015-01-01

In the recent years there has been a proliferation of initiatives to classify food products according to their nutritional composition (e.g., high in fat/sugar) to better guide consumer choices and regulate the food environment. This global trend, lately introduced in Asia as well, utilizes nutrient profiling (NP) to set compositional criteria for food products. Even though the use of NP to set targets for product reformulation has been proposed for years, to date only two NP systems have been specifically developed for that purpose. The majority of the NP applications, especially in Asia, focus on marketing and/or health claim regulation, as well as front-of-pack labeling. Product reformulation has been identified, by the World Health Organization and other official bodies, as a key tool for the food industry to help address public health nutrition priorities and provide support towards the reduction of excessive dietary sugar, salt and fats. In the United Kingdom, the Responsibility Deal is an excellent example of a public-private collaborative initiative that successfully reduced the salt content of products available in the supermarkets by 20-30%, resulting in an estimated 10% reduction in salt intake at the population level. Validation of NP systems targeted towards reformulation supports the hypothesis that, by adopting them, the industry can actively support existing policies in the direction of lowering consumptions in public health-sensitive nutrients. The symposium presented a discussion on the current NP landscape in Asia, the importance of reformulation for public health and the Nestlé approach to improve the food environment in Asia through NP.

Sustainable development perspectives of poultry production

DEFF Research Database (Denmark)

Vaarst, Mette; Steenfeldt, Sanna; Horsted, Klaus

2015-01-01

or more of the four aspects, e.g., pollution and antibiotic use, biodiversity (environmental aspects), conditions for farm workers and animal welfare (social aspects), governance of the food chain (institutional aspects), and the development of poultry from a valuable food to a cheap staple food...... throughout major parts of the world (economic aspects). There are numerous potential pathways for sustainable development of poultry production. Poultry are living, sentient animals that can be well integrated into many different types of urban and rural farming systems, where they benefit from...... and contribute to such systems and to the livelihood of households around the globe, with special emphasis on women. Furthermore, local production provides potential for production with minimum transport and, concomitantly, minimum usage of fossil fuels. Among the terrestrial animals, poultry has the best...

A Review of Underground Coal Gasification Research and Development in the United States

Energy Technology Data Exchange (ETDEWEB)

Camp, D. W. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2017-06-26

An intense and productive period of research and development on underground coal gasification (UCG) took place in the United States from the mid-1970’s through the late 1980’s. It began with the translation and review of Soviet literature and ended with the Rocky Mountain 1 field test. This demonstrated the feasibility of newly-developed technologies that form the basis of many UCG projects around the world today. This period began with little domestic understanding of UCG and ended with an accurate observation-based conceptual model and a corresponding predictive multi-physics mathematical model of the process. The many accomplishments of this period form the main content of this report. This report also covers recent U.S. activities and accomplishments during the period 2004-2015, and touches briefly on the Bureau of Mines efforts between 1948 and 1963. Most of the activities were funded by the United States Department of Energy and its predecessors. While private/commercially-funded activities are reviewed here, the emphasis is on government-funded work. It has a much greater extent of publicly available reports and papers, and they generally contain much greater technical detail. Field tests were the marquis activities around which an integrated multi-faceted program was built. These are described in detail in Section 4. Highlights from modeling efforts are briefly covered, as the program was integrated and well-rounded, with field results informing models and vice-versa. The primary goal of this report is to review what has been learned about UCG from the U.S. experience in aggregate. This includes observations, conclusions, lessons-learned, phenomena understood, and technology developed. The latter sections of this report review these things.

Communication practices in inter-organisational product development

OpenAIRE

Paasivaara, Maria

2005-01-01

Geographically distributed, inter-organisational product development projects are becoming increasingly common. However, companies face challenges in managing this kind of complicated projects. Most of the challenges are related to communication. This study focused on communication needs, problems and practices in distributed inter-organisational product development projects. The main objective was to identify and describe successful communication practices. In addition, the study aimed t...

Testing Software Development Project Productivity Model

Science.gov (United States)

Lipkin, Ilya

Software development is an increasingly influential factor in today's business environment, and a major issue affecting software development is how an organization estimates projects. If the organization underestimates cost, schedule, and quality requirements, the end results will not meet customer needs. On the other hand, if the organization overestimates these criteria, resources that could have been used more profitably will be wasted. There is no accurate model or measure available that can guide an organization in a quest for software development, with existing estimation models often underestimating software development efforts as much as 500 to 600 percent. To address this issue, existing models usually are calibrated using local data with a small sample size, with resulting estimates not offering improved cost analysis. This study presents a conceptual model for accurately estimating software development, based on an extensive literature review and theoretical analysis based on Sociotechnical Systems (STS) theory. The conceptual model serves as a solution to bridge organizational and technological factors and is validated using an empirical dataset provided by the DoD. Practical implications of this study allow for practitioners to concentrate on specific constructs of interest that provide the best value for the least amount of time. This study outlines key contributing constructs that are unique for Software Size E-SLOC, Man-hours Spent, and Quality of the Product, those constructs having the largest contribution to project productivity. This study discusses customer characteristics and provides a framework for a simplified project analysis for source selection evaluation and audit task reviews for the customers and suppliers. Theoretical contributions of this study provide an initial theory-based hypothesized project productivity model that can be used as a generic overall model across several application domains such as IT, Command and Control

Legal aspects of unitization: a comparative approach; Aspectos juridicos da unitizacao: uma abordagem comparativa

Energy Technology Data Exchange (ETDEWEB)

Cunha, Amanda L. [PETROBRAS S.A., Rio de Janeiro, RJ (Brazil)

2004-07-01

The objective of this paper is the study of unitization under a comparative approach between the legal system of some of the most important countries in mature production of oil and gas as well of those which represent the new frontier in exploration and production of these natural resources, and also the provisions regarding unitization in the Brazil's legal system. Firstly, concepts and classifications about unitization, the historical context related to it, and the different doctrines regarding unitization will be analyzed. This analysis will be done considering the concepts developed by American jurisprudence, since it was in the United States where the first thesis regarding unitization were developed, such as the rule of capture and the correlative rights doctrines. Afterwards, it will be presented a study of some unitization's provisions found in different countries' statutes, regulations and contracts such as leases, production sharing agreements, concession contracts etc., being pointed the similarities and differences related to Brazil's legal system. Finally, the national legislation in force as well the Model Concession Contract of ANP's Sixth Round will be analyzed. (author)

Modelling production system architectures in the early phases of product development

DEFF Research Database (Denmark)

Guðlaugsson, Tómas Vignir; Ravn, Poul Martin; Mortensen, Niels Henrik

2016-01-01

are needed and appropriate to enable determination of obtainable product quality. In order to meet this challenge, it is suggested that a visual modelling framework be adopted that clarifies which product and production features are known at a specific time of the project and which features will be worked...... on – leading to an improved basis for prioritizing activities in the project. Requirements for the contents of the framework are presented, and literature on production and system models is reviewed. The production system architecture modelling framework is founded on methods and approaches in literature......This article suggests a framework for modelling a production system architecture in the early phases of product development.The challenge in these phases is that the products to be produced are not completely defined and yet decisions need to be made early in the process on what investments...

Development of a portable instrument to measure ozone production rates in the troposphere

Science.gov (United States)

Sklaveniti, Sofia; Locoge, Nadine; Stevens, Philip; Kumar, Vinod; Sinha, Vinayak; Dusanter, Sébastien

2015-04-01

Ground-level ozone is a key species related to air pollution, causing respiratory problems, damaging crops and forests, and affecting the climate. Our current understanding of the tropospheric ozone-forming chemistry indicates that net ozone production occurs via reactions of peroxy radicals (HO2 + RO2) with NO producing NO2, whose photolysis leads to O3 formation. Production rates of tropospheric ozone, P(O3), depend on concentrations of oxides of nitrogen (NOx = NO + NO2) and Volatile Organic Compounds (V OCs), but also on production rates of ROx radicals (OH + HO2 + RO2). The formation of ozone follows a complex nonlinear chemistry that makes strategies for reducing ozone difficult to implement. In this context, atmospheric chemistry models are used to develop emission regulations, but there are still uncertainties associated with the chemical mechanisms used in these models. Testing the ozone formation chemistry in atmospheric models is needed, in order to ensure the development of effective strategies for ozone reduction. We will present the development of an instrument for direct measurements of ozone production rates (OPR) in ambient air. The OPR instrument is made of three components: (i) two quartz flow tubes to sample ambient air, one exposed to solar radiation and one covered by a UV filter, (ii) a NO2-to-O3 conversion unit, and (iii) an ozone analyzer. The total amount of ozone exiting each flow tube is conserved in the form of Ox = NO2 + O3. Ozone production rates P(O3) are derived from the difference in Ox concentration between the two flow tubes, divided by the exposure time of air inside the flow tubes. We will present studies that were carried out in the laboratory to characterize each part of the instrument and we will discuss the performances of the OPR instrument based on experiments carried out using synthetic air mixtures of known composition (NOx and V OCs). Chemical modeling will also be presented to assess the reliability of ozone

Development Considerations for Nanocrystal Drug Products.

Science.gov (United States)

Chen, Mei-Ling; John, Mathew; Lee, Sau L; Tyner, Katherine M

2017-05-01

Nanocrystal technology has emerged as a valuable tool for facilitating the delivery of poorly water-soluble active pharmaceutical ingredients (APIs) and enhancing API bioavailability. To date, the US Food and Drug Administration (FDA) has received over 80 applications for drug products containing nanocrystals. These products can be delivered by different routes of administration and are used in a variety of therapeutic areas. To aid in identifying key developmental considerations for these products, a retrospective analysis was performed on the submissions received by the FDA to date. Over 60% of the submissions were for the oral route of administration. Based on the Biopharmaceutics Classification System (BCS), most nanocrystal drugs submitted to the FDA are class II compounds that possess low aqueous solubility and high intestinal permeability. Impact of food on drug bioavailability was reduced for most nanocrystal formulations as compared with their micronized counterparts. For all routes of administration, dose proportionality was observed for some, but not all, nanocrystal products. Particular emphasis in the development of nanocrystal products was placed on the in-process tests and controls at critical manufacturing steps (such as milling process), mitigation and control of process-related impurities, and the stability of APIs or polymorphic form (s) during manufacturing and upon storage. This emphasis resulted in identifying challenges to the development of these products including accurate determination of particle size (distribution) of drug substance and/or nanocrystal colloidal dispersion, identification of polymorphic form (s), and establishment of drug substance/product specifications.

Proactive Modeling of Market, Product and Production Architectures

DEFF Research Database (Denmark)

Mortensen, Niels Henrik; Hansen, Christian Lindschou; Hvam, Lars

2011-01-01

This paper presents an operational model that allows description of market, products and production architectures. The main feature of this model is the ability to describe both structural and functional aspect of architectures. The structural aspect is an answer to the question: What constitutes...... the architecture, e.g. standard designs, design units and interfaces? The functional aspect is an answer to the question: What is the behaviour or the architecture, what is it able to do, i.e. which products at which performance levels can be derived from the architecture? Among the most important benefits...... of this model is the explicit ability to describe what the architecture is prepared for, and what it is not prepared for - concerning development of future derivative products. The model has been applied in a large scale global product development project. Among the most important benefits is contribution to...

International product development - Challenges in knowledge sharing

DEFF Research Database (Denmark)

Sonne, Anne-Mette

2008-01-01

Knowledge and internationalization are two important concepts in the corporate world today. Knowledge is companies' most important resource, and internationalization is a factor which affects all areas of management - particularly product development. The development of successful products...... for the international market rests on a company's ability to cooperate and to share knowledge. In order to develop products for the international market, companies must be capable of expanding knowledge sharing across geographical and professional divides. This is the focus of a new MAPP PhD dissertation....

Evaluation of thermal and photovoltaic solar systems in agricultural production units, Northern Huetar Region, Costa Rica

Directory of Open Access Journals (Sweden)

Tomás de Jesús Guzmán Hernández

2017-09-01

Full Text Available The dependence on fossil fuels urges society to seek for clean energy alternatives, in order to mitigate the effects of climate change. The objective of this study was to determine the potential of solar energy used for water heating and electricity generation. The study was conducted at the dairy of the Technology Institute of Costa Rica, San Carlos Headquarter, from May 15 to April 2016. The data related to the amount of the electricity produced and the temperature reached by water was obtained from the installed photovoltaic and thermal systems, the data was recorded by a computerized register. The obtained information about electricity production allowed researchers to calculate the amount of carbon dioxide equivalent that was not emitted into the atmosphere, and also the acquired economic saving on consumption. The use of these systems allowed the production unit have a self- sufficient source of electrical energy percentage, actually around 30 to 40% of the total electrical consumption. According to the energy production, the solar thermal system was capable to increase water temperature between 20 to 37 °C, temperature that represents more than 70% of the energy needed in order to reach the required water temperature (70 °C for cleaning and sanitizing the milking equipment, and also an economical saving around $90 per month was achieved. The results showed that these systems allow to improve the economical and productive efficiency of agricultural production units in the Northern Huetar Region of Costa Rica.

Challenges associated with knowledge sharing in international product development teams

DEFF Research Database (Denmark)

Sonne, Anne-Mette; Harmsen, Hanne

on product development teams, knowledge sharing, and international product development management to form a conceptual framework of factors that influence knowledge sharing in international teams. Four in-depth case studies are used to explore and expand the understanding of the challenges associated...... with international product development teams. Results indicate that international product development might not be as international as would be expected and that even if many of the characteristics and problems associated with international product development in the literature are found, there are also a number...

Development of design procedures for fast reactors in the United Kingdom

International Nuclear Information System (INIS)

Rose, R.T.; Tomkins, B.; Townley, C.H.A.

1989-01-01

A considerable amount of research has been carried out in the United Kingdom during the past two decades to quantify the factors which control the integrity of structural components. The work which has been aimed at understanding the performance of structures at high temperature, is particularly relevant to the Fast Reactor. At the same time, because of the need to demonstrate the tolerance to defects in the low temperature as well as the high temperature components, defect assessment criteria are also of great importance. Emphasis is now being given to the development of design procedures specifically for Fast Reactors, making use of the research so far completed. The United Kingdom proposals are being integrated with those from France, Federal Republic of Germany and Italy as part of the European collaborative venture. The paper outlines the major developments which are currently in hand, and brings up to date the review of United Kingdom activities presented at Tokyo in 1986. (author)

Expected Influence of Ethics on Product Development Process

Directory of Open Access Journals (Sweden)

Stig Larsson

2008-07-01

Full Text Available Product development efficiency and effectiveness is depending on a process being well executed. The actions of individuals included in the processes are influenced by the ethical and moral orientations that have been selected by each individual, whether this selection is conscious or not. This paper describes different ethical choices and the expected effects they may have on the development process exemplified by the product integration process for software products. The different frameworks analyzed are utilitarianism, rights ethics, duty ethics, virtue ethics and ethical egoism. The expected effects on the goals for product integration may be debated. This is a result in it self as it triggers discussions about ethical considerations and increase the awareness of the influence of moral decisions. Our conclusion is that the adherence to specific moral frameworks simplifies the alignment of actions to the practices described in product development models and standards and through this supports a more successful execution of product development projects. This conclusion is also confirmed through a comparison between the different directions and several codes of ethics for engineers issued by organizations such as IEEE as these combine features from several of the discussed ethical directions.

Moving from a Predominantly Teaching Oriented Culture to a Research Productivity Mission: The Case of Mexico and the United States

Directory of Open Access Journals (Sweden)

Gustavo Gregorutti

2010-12-01

Full Text Available This study qualitatively analyzes the culture conflicts professors in the United States and Mexico are experiencing with the increasing pressures to produce more research about higher education. The first dataset was collected from 36 faculty members from 12 small and medium sized private, doctorate-granting universities. These universities are located in 11 states across the United States. The remaining data came from 44 faculty members employed at four small and medium sized private, doctoral granting universities in four states across Mexico. Results showed that universities in the US are transitioning from a predominantly teaching college culture to a more research orientation. Although the sampled universities continue to offer established graduate programs, faculty members continue to struggle with their teaching requirements and conflicts research productivity pressures place on their teaching and mentoring time with students. Participating faculty members employed in the US were not evenly interested in research opportunities due to the diverse mission objectives promoted by their respective institutions. On the other hand, faculty members employed in Mexico were generally more concerned with their research productivity and subsequent factors, which negatively impact their research productivity. Mexican faculty members rarely cited conflicts between their institutional missions and teaching objectives. This study is highly relevant to policy makers, higher education administrators, and scholars interested in comparative and international higher education. Administrators can benefit from the findings in this study, which provides faculty members’ perceptions and describes departmental structures and organizational dynamics employed to advance greater research and development opportunities. This study concludes with a discussion on how administrators and faculty members should handle the pressures for research productivity and

Life-Cycle Inventory Analysis of I-joist Production in the United States

Science.gov (United States)

Richard D. Bergman

2015-01-01

Documenting the environmental performance of building products is becoming increasingly common. Creating environmental product declarations (EPDs) based on life-cycle assessment (LCA) data is one approach to provide scientific documentation of the products’ environmental performance. Many U.S. structural wood products have LCA-based “eco-labels” developed under the ISO...

Company competencies as a network: The role of product development

DEFF Research Database (Denmark)

Harmsen, Hanne; Grunert, Klaus G.; Bove, Karsten

2000-01-01

investigate these matters in a survey with top managers in 513 Danish production companies. Ten areas important for achieving company objectives are identified. These are product development, market intelligence, production management, strategy and vision, sales, market responsiveness, promotion, internal co......-operation, image, and finally supply management. Product development is rated a fairly important competence as it ranks four with sales, market responsiveness, and production management as numbers one to three. Yet a distressing negative impact on overall company success is found for product development......Product development managers and academics like to assure themselves and each other that new product development is one of the most critical areas of company competence and contributes positively to company success But does top management agree? Because if they do not, the consequences will heavily...

Lessons Learned In Developing The VACIS Products

International Nuclear Information System (INIS)

Orphan, Victor J.

2011-01-01

SAIC's development of VACIS provides useful 'lessons learned' in bridging the gap from an idea to a security or contraband detection product. From a gamma densitometer idea for solving a specific Customs Service (CS) requirement (detection of drugs in near-empty tanker trucks) in mid-1990's, SAIC developed a broad line of vehicle and cargo inspections systems (over 500 systems deployed to date) based on a gamma-ray radiographic imaging technique. This paper analyzes the reasons for the successful development of VACIS and attempts to identify ''lessons learned'' useful for future security and contraband detection product developments.

The US department of energy's research and development plans for the use of nuclear energy for hydrogen production

International Nuclear Information System (INIS)

Henderson, A.D.; Pickard, P.S.; Park, C.V.; Kotek, J.F.

2004-01-01

The potential of hydrogen as a transportation fuel and for stationary power applications has generated significant interest in the United States. President George W. Bush has set the transition to a 'hydrogen economy' as one of the Administration's highest priorities. A key element of an environmentally-conscious transition to hydrogen is the development of hydrogen production technologies that do not emit greenhouse gases or other air pollutants. The Administration is investing in the development of several technologies, including hydrogen production through the use of renewable fuels, fossil fuels with carbon sequestration, and nuclear energy. The US Department of Energy's Office of Nuclear Energy, Science and Technology initiated the Nuclear Hydrogen Initiative to develop hydrogen production cycles that use nuclear energy. The Nuclear Hydrogen Initiative has completed a Nuclear Hydrogen R and D Plan to identify candidate technologies, assess their viability, and define the R and D required to enable the demonstration of nuclear hydrogen production by 2016. This paper gives a brief overview of the Nuclear Hydrogen Initiative, describes the purposes of the Nuclear Hydrogen R and D Plan, explains the methodology followed to prepared the plan, presents the results, and discusses the path forward for the US programme to develop technologies which use nuclear energy to produce hydrogen. (author)

Implementing Life Cycle Assessment in Product development

DEFF Research Database (Denmark)

Bhander, Gurbakhash Singh

2003-01-01

The overall aim of the paper is to provide an understanding of the environmental issues involved in the early stages of product development and the capacity of life cycle assessment techniques to address these issues. The paper aims to outline the problems for the designer in evaluating the envir......The overall aim of the paper is to provide an understanding of the environmental issues involved in the early stages of product development and the capacity of life cycle assessment techniques to address these issues. The paper aims to outline the problems for the designer in evaluating......, and of the opportunities for introducing environmental criteria in the design process through meeting the information requirements of the designer on the different life cycle stages, producing an in-depth understanding of the attitudes of practitioners among product developers to the subject area, and an understanding...... of possible future directions for product development. An Environmentally Conscious Design method is introduced and trade-offs are presented between design degrees of freedom and environmental solutions. Life cycle design frameworks and strategies are addressed. The paper collects experiences and ideas around...

Development and Assessment of Planetary Gear Unit for Experimental Prototype of Vertical Axis Wind Turbine

Directory of Open Access Journals (Sweden)

Urbahs A.

2017-10-01

Full Text Available The theoretical calculation for development of planetary gear unit of wind turbine (WT and its experimental tests are presented in the paper. Development of experimental prototypes from composite materials is essential to determine capability of element and its impact on feature. Two experimental scale prototypes of planetary gear unit for WT were developed for such purposes. Hall transducer, servomechanisms and optical tachometers were used to obtain results, comparison analysis of theoretical and actual data was performed as well as quality assessment of experimental prototypes of planetary gear unit. After kinematic and load analysis as well as control of rotation frequency, it is possible to declare that the unit is able to operate at designated quality. Theoretical calculations and test results obtained are used for industrial WT prototype development.

Development and Assessment of Planetary Gear Unit for Experimental Prototype of Vertical Axis Wind Turbine

Science.gov (United States)

Urbahs, A.; Urbaha, M.; Carjova, K.

2017-10-01

The theoretical calculation for development of planetary gear unit of wind turbine (WT) and its experimental tests are presented in the paper. Development of experimental prototypes from composite materials is essential to determine capability of element and its impact on feature. Two experimental scale prototypes of planetary gear unit for WT were developed for such purposes. Hall transducer, servomechanisms and optical tachometers were used to obtain results, comparison analysis of theoretical and actual data was performed as well as quality assessment of experimental prototypes of planetary gear unit. After kinematic and load analysis as well as control of rotation frequency, it is possible to declare that the unit is able to operate at designated quality. Theoretical calculations and test results obtained are used for industrial WT prototype development.

Parallel Development of Products and New Business Models

DEFF Research Database (Denmark)

Lund, Morten; Hansen, Poul H. Kyvsgård

2014-01-01

The perception of product development and the practical execution of product development in professional organizations have undergone dramatic changes in recent years. Many of these chances relate to introduction of broader and more cross-disciplinary views that involves new organizational functi...... and innovation management the 4th generation models are increasingly including the concept business models and business model innovation....... functions and new concepts. These chances can be captured in various generations of practice. This paper will discuss the recent development of 3rd generation product development process models and the emergence of a 4th generation. While the 3rd generation models included the concept of innovation...

Development of small-scale peat production; Pienturvetuotannon kehittaeminen

Energy Technology Data Exchange (ETDEWEB)

Erkkilae, A.; Kallio, E. [VTT Energy, Jyvaeskylae (Finland)

1997-12-01

The aim of the project is to develop production conditions, methods and technology of small-scale peat production to such a level that the productivity is improved and competitivity maintained. The aim in 1996 was to survey the present status of small-scale peat production, and research and development needs and to prepare a development plan for small-scale peat production for a continued project in 1997 and for the longer term. A questionnaire was sent to producers by mail, and its results were completed by phone interviews. Response was obtained from 164 producers, i.e. from about 75 - 85 % of small-scale peat producers. The quantity of energy peat produced by these amounted to 3.3 TWh and that of other peat to 265 000 m{sup 3}. The total production of energy peat (large- scale producers Vapo Oy and Turveruukki Oy included) amounted to 25.0 TWh in 1996 in Finland, of which 91 % (22.8 TWh) was milled peat and 9 % (2.2 TWh) of sod peat. The total production of peat other than energy peat amounted to 1.4 million m{sup 3}. The proportion of small-scale peat production was 13 % of energy peat, 11 % of milled peat and 38 % of sod peat. The proportion of small-scale producers was 18 % of other peat production. The results deviate clearly from those obtained in a study of small-scale production in the 1980s. The amount of small-scale production is clearly larger than generally assessed. Small-scale production focuses more on milled peat than on sod peat. The work will be continued in 1997. Based on development needs appeared in the questionnaire, the aim is to reduce environmental impacts and runoff effluents from small- scale production, to increase the efficiency of peat deliveries and to reduce peat production costs by improving the service value of machines by increasing co-operative use. (orig.)

Ground-breaking virtual research in product development

DEFF Research Database (Denmark)

Søndergaard, Helle Alsted; Jespersen, Kristina Risom; Buck, Nuka

2008-01-01

MAPP also focuses on virtual reality. In the research project RIPS - the Role of Information Processing in NPD Strategy - a simulation of a product development process was used as a data collection instrument.......MAPP also focuses on virtual reality. In the research project RIPS - the Role of Information Processing in NPD Strategy - a simulation of a product development process was used as a data collection instrument....

An Alternative Method for Computing Unit Costs and Productivity Ratios. AIR 1984 Annual Forum Paper.

Science.gov (United States)

Winstead, Wayland H.; And Others

An alternative measure for evaluating the performance of academic departments was studied. A comparison was made with the traditional manner for computing unit costs and productivity ratios: prorating the salary and effort of each faculty member to each course level based on the personal mix of course taught. The alternative method used averaging…

Some timber product market and trade implications of an invasive defoliator: the case of Asian lymantria in the United States

Science.gov (United States)

Jeffrey P. Prestemon; James A. Turner; Joseph Buongiorno; Shushuai Zhu; Ruhong Li

2008-01-01

US policy and forest product industry decisionmakers need quantitative information about the magnitude of timber product market impacts from the possible introduction of an exotic and potentially dangerous defoliating forest pest. We applied the Global Forest Products Model to evaluate the effects on the United States of an invasion by the Asian gypsy (...

Primary phonological planning units in spoken word production are language-specific: Evidence from an ERP study.

Science.gov (United States)

Wang, Jie; Wong, Andus Wing-Kuen; Wang, Suiping; Chen, Hsuan-Chih

2017-07-19

It is widely acknowledged in Germanic languages that segments are the primary planning units at the phonological encoding stage of spoken word production. Mixed results, however, have been found in Chinese, and it is still unclear what roles syllables and segments play in planning Chinese spoken word production. In the current study, participants were asked to first prepare and later produce disyllabic Mandarin words upon picture prompts and a response cue while electroencephalogram (EEG) signals were recorded. Each two consecutive pictures implicitly formed a pair of prime and target, whose names shared the same word-initial atonal syllable or the same word-initial segments, or were unrelated in the control conditions. Only syllable repetition induced significant effects on event-related brain potentials (ERPs) after target onset: a widely distributed positivity in the 200- to 400-ms interval and an anterior positivity in the 400- to 600-ms interval. We interpret these to reflect syllable-size representations at the phonological encoding and phonetic encoding stages. Our results provide the first electrophysiological evidence for the distinct role of syllables in producing Mandarin spoken words, supporting a language specificity hypothesis about the primary phonological units in spoken word production.

Wind Development in the United States: A Comprehensive Policy Framework for Effective Wind Development as Framed by PJM Stakeholders

Science.gov (United States)

Stewart, Courtney A.

Wind energy has been lauded as a resource for the United States to lessen its dependency on foreign fuels, reduce carbon output, and potentially create millions of jobs. Accordingly, wind energy is in the forefront of many government officials' minds throughout the United States; however, there are several barriers to wind farm development. This research reviews the social and political barriers to wind farm development and examines the successful renewable energy policies that have been used throughout Europe and the United States. This research consists of interviews with various stakeholders in the PJM region who compare and contrast renewable energy policies in Europe from those in the United States. The resulting information from the interviews creates a comprehensive policy framework that policy makers at all levels of government can utilize and refer to when discussing and drafting wind energy legislation.

The role of industry in the development of a product for control of mycoplasmal plant diseases.

Science.gov (United States)

Carroll, V J

1982-01-01

A number of mycoplasmal or mycoplasma-like diseases of plants have been treated with an oxytetracycline-based product. Remission of symptoms has generally resulted, and in some instances the local use of this product under temporary governmental registrations has been approved. The use of oxytetracycline for control of many such diseases is not commercially feasible because the potential market is relatively small and the costs of development are relatively high. However, oxytetracycline products may be useful when a disease problem becomes sufficiently serious to arouse academic attention and agricultural or public concern. The commercial use of oxytetracycline hydrochloride for remission and prevention of lethal yellowing of coconut palm was begun in 1974. Use of this product for control of pear decline disease followed shortly thereafter. To date, joint participation and cooperation of the drug and agricultural industries have also resulted in the control of two important mycoplasma-like diseases of peach trees in the United States.

Consequences of new product development speed : a meta-analysis

NARCIS (Netherlands)

Cankurtaran, P.; Langerak, F.; Griffin, A.

2011-01-01

Despite the widespread contention that development speed is a prerequisite for successful new product development, there exists insufficient, often conflicting empirical evidence regarding how speed relates to the different dimensions of new product success. Given that new product success is a

Customer/User Workshops in Product development

DEFF Research Database (Denmark)

Brandt, Eva; Binder, Thomas

1997-01-01

In a recent product development project, we have taken part in establishing and organising a series of workshops with a group of customers/users of a future product line through out the development project. The workshops is a kind of informal meetingplace for engineering, marketing, customers...... and discuss experiences with this kind of collaborative fora. We have tried to demonstrate that having an on-going dialogue with users/customers also during detailed design in not only a means to keep 'the voive of the customer alive'. We have found that the workshops have an important impact on securing...

A Multidisciplinary Approach to Decommissioning Offshore Wells Using Stakeholder Engagement, Risk Identification, and the United Nations Sustainable Development Goals

Science.gov (United States)

Battalora, L.; Prasad, M.

2017-12-01

Context/PurposeThe typical oil and gas project lifecycle includes acquisition, exploration, drilling, production, and decommissioning phases. The oil and gas industry (Industry) has become proactive in identifying and mitigating health, safety, security, environment, and social responsibility risks during these phases as well as designing for sustainable development. With many fields reaching the end stages of the lifecycle, Industry is faced with the challenge of identifying and evaluating risks in the decommissioning phase. The level of challenge is increased when planning for the decommissioning of offshore wells. This paper describes tools that can be applied in the multidisciplinary design of the decommissioning program including use of the United Nations Sustainable Development Goals (SDGs). MethodsStakeholder engagement is key to a successful project. Typical stakeholders in an oil and gas project include the community, regulatory agencies, federal, state, and local governments, private investors, academia, and non-governmental organizations. Before engagement begins, stakeholders must be identified as well as their level of influence in the project. Relationships between stakeholders are "mapped" providing a better understanding of priorities and areas of concentration. Project risks are identified and ranked according to likelihood and impact. Mitigations are matched to risks. Sustainable development is implemented through acknowledgement of societal, economic, and environmental impacts in engineering design. InterpretationRecently, the United Nations Development Programme (UNDP), the International Finance Corporation (IFC) and IPIECA, the global oil and gas industry association for environmental and social issues, partnered to develop the publication, Mapping the oil and gas industry to the Sustainable Development Goals: An Atlas. SDGs have been linked to Industry operations and can serve as a guide for the offshore decommissioning phase Conclusion

Coordinator, Evaluation Unit | IDRC - International Development ...

International Development Research Centre (IDRC) Digital Library (Canada)

Job Summary The Evaluation Unit Coordinator is expected to: ... with Centre policies and procedures and disseminates information to Unit staff on changes ... Coordinates the planning and organization of technical and administrative meetings ...

Vastus lateralis single motor unit EMG at the same absolute torque production at different knee angles

NARCIS (Netherlands)

Altenburg, T.M.; de Haan, A.; Verdijk, P.W.; van Mechelen, W.; de Ruiter, C.J.

2009-01-01

Single motor unit electromyographic (EMG) activity of the knee extensors was investigated at different knee angles with subjects (n = 10) exerting the same absolute submaximal isometric torque at each angle. Measurements were made over a 20° range around the optimum angle for torque production