WorldWideScience

Sample records for product description revision

  1. Resource description and access 2013 revision

    CERN Document Server

    2013-01-01

    This e-book contains the 2013 Revision of RDA: Resource Description and Access, and includes the July 2013 Update. This e-book offers links within the RDA text and the capability of running rudimentary searches of RDA, but please note that this e-book does not have the full range of content or functionality provided by the subscription product RDA Toolkit. Included: A full accumulation of RDA- the revision contains a full set of all current RDA instructions. It replaces the previous version of RDA Print as opposed to being an update packet to that version. RDA has gone through many changes sin

  2. Descriptive epidemiology of the Multicenter ACL Revision Study (MARS) cohort.

    Science.gov (United States)

    Wright, Rick W; Huston, Laura J; Spindler, Kurt P; Dunn, Warren R; Haas, Amanda K; Allen, Christina R; Cooper, Daniel E; DeBerardino, Thomas M; Lantz, Brett Brick A; Mann, Barton J; Stuart, Michael J

    2010-10-01

    Revision anterior cruciate ligament (ACL) reconstruction has worse outcomes than primary reconstructions. Predictors for these worse outcomes are not known. The Multicenter ACL Revision Study (MARS) Group was developed to perform a multisurgeon, multicenter prospective longitudinal study to obtain sufficient subjects to allow multivariable analysis to determine predictors of clinical outcome. To describe the formation of MARS and provide descriptive analysis of patient demographics and clinical features for the initial 460 enrolled patients to date in this prospective cohort. Cross-sectional study; Level of evidence, 2. After training and institutional review board approval, surgeons began enrolling patients undergoing revision ACL reconstruction, recording patient demographics, previous ACL reconstruction methods, intra-articular injuries, and current revision techniques. Enrolled subjects completed a questionnaire consisting of validated patient-based outcome measures. As of April 1, 2009, 87 surgeons have enrolled a total of 460 patients (57% men; median age, 26 years). For 89%, the reconstruction was the first revision. Mode of failure as deemed by the revising surgeon was traumatic (32%), technical (24%), biologic (7%), combination (37%), infection (MARS Group has been able to quickly accumulate the largest revision ACL reconstruction cohort reported to date. Traumatic reinjury is deemed by surgeons to be the most common single mode of failure, but a combination of factors represents the most common mode of failure. Allograft graft choice is more common in the revision setting than autograft. Concomitant knee injury is extremely common in this population.

  3. Description of Project Sapphire. Revision 1

    International Nuclear Information System (INIS)

    Taylor, R.G.

    1995-01-01

    The mission of Project Sapphire was to repackage approximately 600 kg of highly enriched uranium (HEU) in the Republic of Kazakhstan into internationally acceptable shipping packages and transport the material to a storage location in the United States. There were four material types to be repackaged: metal; oxide; uranium/beryllium (U/Be) alloy; and residues from U/Be alloy production. Seven major steps described in this report were necessary for successful execution of the project: planning and training; readiness assessment; deployment; set up; process; take down; and transport. Nuclear criticality safety especially affected several of these steps

  4. New and revised standards for coke production

    Energy Technology Data Exchange (ETDEWEB)

    G.A. Kotsyuba; M.I. Alpatov; Y.G. Shapoval [Giprokoks, the State Institute for the Design of Coke-Industry Enterprises, Kharkov (Ukraine)

    2009-07-15

    The need for new and revised standards for coke production in Ukraine and Russia is outlined. Such standards should address improvements in plant operation, working conditions, environmental protection, energy conservation, fire and explosion safety, and economic indices.

  5. CDMS: CAD data set system design description. Revision 1

    International Nuclear Information System (INIS)

    Gray, E.L.

    1994-01-01

    This document is intended to formalize the program design of the CAD Data Set Management System (CDMS) and to be the vehicle to communicate the design to the Engineering, Design Services, and Configuration Management organizations and the WHC IRM Analysts/Programmers. The SDD shows how the software system will be structured to satisfy the requirements identified in the WHC-SD-GN-CSRS-30005 CDMS Software Requirement Specification (SRS). It is a description of the software structure, software components, interfaces, and data that make up the CDMS System. The design descriptions contained within this document will describe in detail the software product that will be developed to assist the aforementioned organizations for the express purpose of managing CAD data sets associated with released drawings, replacing the existing locally developed system and laying the foundation for automating the configuration management

  6. Revised Reynolds Stress and Triple Product Models

    Science.gov (United States)

    Olsen, Michael E.; Lillard, Randolph P.

    2017-01-01

    Revised versions of Lag methodology Reynolds-stress and triple product models are applied to accepted test cases to assess the improvement, or lack thereof, in the prediction capability of the models. The Bachalo-Johnson bump flow is shown as an example for this abstract submission.

  7. IMAGE-2006 Mosaic: Product Description

    OpenAIRE

    SOILLE Pierre; BIELSKI Conrad

    2008-01-01

    This report describes the IMAGE-2006 mosaic products. Each product consists of a range of information layers grouped into three categories: base layers, mosaic layers, and quality layers. A mosaic product is available for each coverage and data/country region of interest combination.

  8. Description, Modelling and Design of Production Systems

    DEFF Research Database (Denmark)

    Jacobsen, Peter; Rudolph, Carsten

    1997-01-01

    Design of production systems are rarely an activity in which decision makers in most production companies have much experience. In future, this activity is to be more recurrent due to more and more frequent changes in the production task. Consequently, the decision makers are in need of better...... management tools and methods for description and modelling of production systems supporting the decisions. In this article a structural framework to describe and model production systems will be introduced, and it is shown how the production system of a minor Danish manufacturer of electromechanical...

  9. Reference design description for a geologic repository. Revision 02

    International Nuclear Information System (INIS)

    1999-01-01

    This Reference Design Description explains the current design for a potential geologic repository that may be located at Yucca Mountain in Nevada. It describes the proposed design for a surface facility, subsurface repository, and waste packaging; it also presents the current design of the key engineering systems for the final four phases: operations, monitoring, closure, and postclosure. In addition, this Reference Design Description reviews the expected long-term performance of the potential repository. In accordance with current law, this design does not include an interim storage option. This document has six major sections. Section 1 describes the physical layout of the proposed repository. The second section describes the 4-phase evolution of the development of the proposed repository. Section 3 describes the reception of waste from offsite locations. The fourth section details the various systems that will package the waste and move it below ground as well as safety monitoring and closure. Section 5 describes the systems (both physical and analytical) that ensure continued safety after closure. The final section offers design options that may be adopted to increase the margin of safety

  10. Reference design description for a geologic repository: Revision 01

    International Nuclear Information System (INIS)

    1997-09-01

    This document describes the current design expectations for a potential geologic repository that could be located at Yucca Mountain in Nevada. This Reference Design Description (RDD) looks at the surface and subsurface repository and disposal container design. Additionally, it reviews the expected long-term performance of the potential repository. In accordance with current legislation, the reference design for the potential repository does not include an interim storage option. The reference design presented allows the disposal of highly radioactive material received from government-owned spent fuel custodian sites; produces high-level waste sites, and commercial spent fuel sites. All design elements meet current federal, state, and local regulations governing the disposal of high-level radioactive waste and protection of the public and the environment. Due to the complex nature of developing a repository, the design will be created in three phases to support Viability Assessment, License Application, and construction. This document presents the current reference design. It will be updated periodically as the design progresses. Some of the details presented here may change significantly as more cost-effective solutions, technical advancements, or changes to requirements are identified

  11. Designing Automated Guidance to Promote Productive Revision of Science Explanations

    Science.gov (United States)

    Tansomboon, Charissa; Gerard, Libby F.; Vitale, Jonathan M.; Linn, Marcia C.

    2017-01-01

    Supporting students to revise their written explanations in science can help students to integrate disparate ideas and develop a coherent, generative account of complex scientific topics. Using natural language processing to analyze student written work, we compare forms of automated guidance designed to motivate productive revision and help…

  12. Revised description of the fine structure of in situ "zooxanthellae" genus Symbiodinium.

    Science.gov (United States)

    Wakefield, T S; Farmer, M A; Kempf, S C

    2000-08-01

    The fine structure of the symbiotic dinoflagellate genus Symbiodinium has been well described. All of the published descriptions are based on tissue that was fixed in standard aldehyde and osmium fixatives and dehydrated in an ethanol series before embedding. When the technique of freeze-substitution was used to fix tissue from Cassiopeia xamachana, Aiptasia pallida, and Phyllactis flosculifera and prepare it for embedding, thecal vesicles were revealed within the in situ symbionts of all three species. Although these structures have been identified in cultured symbionts, they have never been described in the in situ symbionts. A review of the literature has revealed several instances where thecal vesicles were either overlooked or identified incorrectly. Thus the formal description of the genus Symbiodinium, which describes the in situ symbionts, contains information that is based on artifact and should be revised. A revision of the genus is suggested, and the true nature of these structures and their significance in the symbiotic association are discussed.

  13. Revised

    DEFF Research Database (Denmark)

    Johannsen, Vivian Kvist; Nord-Larsen, Thomas; Riis-Nielsen, Torben

    This report is a revised analysis of the Danish data on CO2 emissions from forest, afforestation and deforestation for the period 1990 - 2008 and a prognosis for the period until 2020. Revision have included measurements from 2009 in the estimations. The report is funded by the Ministry of Climate...

  14. A revised ANS standard for decay heat from fission products

    International Nuclear Information System (INIS)

    Schrock, V.E.

    1978-01-01

    The draft ANS 5.1 standard on decay heat was published in 1971 and given minor revision in 1973. Its basis was the best estimate working curve developed by K. Shure in 1961. Liberal uncertainties were assigned to the standard values because of lack of data for short cooling times and large discrepancies among experimental data. Research carried out over the past few years has greatly improved the knowledge of this phenomenon and a major revision of the standard has been completed. Very accurate determination of the decay heat is now possible, expecially within the first 10 4 seconds, where the influence of neutron capture in fission products may be treated as a small correction to the idealized zero capture case. The new standard accounts for differences among fuel nuclides. It covers cooling time to 10 9 seconds, but provides only an ''upper bound'' on the capture correction in the interval 10 4 9 seconds. (author)

  15. Revision of the genus Verilus (Perciformes: Acropomatidae) with a description of a new species.

    Science.gov (United States)

    Yamanoue, Y

    2016-11-01

    The acropomatid genus Verilus is redescribed as a senior synonym of Apogonops and Neoscombrops with description of a new species and a taxonomic revision of the five species that were formerly classified in these genera. This genus is characterized by the following combination of characters: a canine tooth (rarely two) near symphysis of premaxilla of upper jaw but lacking a row of conical teeth on anterior part of outer premaxillary margin; a canine tooth (rarely two) near symphysis of dentary with only villiform or a row of conical teeth posteriorly; three anal-fin spines; 10 dorsal-fin spines; pelvic-fin spine smooth; luminous organ absent. This genus comprises six species: Verilus sordidus (type species, western Atlantic Ocean); Verilus anomalus (off southern and eastern coast of Australia); Verilus atlanticus (western Atlantic Ocean); Verilus cynodon (south-western Indian Ocean); Verilus pacificus (north-western and central Pacific Ocean); Verilus starnesi sp. nov. (Coral Sea off Chesterfield Islands, New Caledonia). These species are distinguishable from one another by dentition on the lower jaw, numbers of pectoral-fin rays, gill rakers and lateral-line scales, features of the proximal-middle radial of the first anal-fin pterygiophore, presence or absence of basioccipital fossa and body depth. © 2016 The Fisheries Society of the British Isles.

  16. 7 CFR 52.3181 - Product description.

    Science.gov (United States)

    2010-01-01

    ... MARKETING ACT OF 1946 PROCESSED FRUITS AND VEGETABLES, PROCESSED PRODUCTS THEREOF, AND CERTAIN OTHER... matured prune plums from which the greater portion of moisture is removed by drying. The dried prunes are...

  17. The Dante pulse sequence description by product operators formalism

    International Nuclear Information System (INIS)

    Velloso, Marcia Helena Rodrigues; Villar, Daniel Figueroa

    1999-01-01

    The objective of this work is to supply a didactic example of the application of the product operators formalism for the description of the DANTE (delays alternating with mutation for tailored excitation) pulse sequence

  18. Neutrino production of single pions: Dipole description

    International Nuclear Information System (INIS)

    Kopeliovich, B. Z.; Schmidt, Ivan; Siddikov, M.

    2011-01-01

    The light-cone distribution amplitudes for the axial current are derived within the instanton vacuum model, which incorporates nonperturbative effects including spontaneous chiral symmetry breaking. This allows one to extend applicability of the dipole approach, usually used in the perturbative domain, down to Q 2 →0, where the partially conserved axial current imposes a relation between the neutrino-production cross section and the one induced by pions. A dramatic breakdown of the Adler relation for diffractive neutrino production of pions, caused by absorptive corrections, was revealed recently by Kopeliovich et al.. Indeed, comparing with the cross section predicted by the dipole phenomenology at Q 2 →0 on a proton target we confirmed the sizable deviation from the value given by the Adler relation, as was estimated by Kopeliovich et al. within a simplified two-channel model. The dipole approach also confirms that in the black-disk limit, where the absorptive corrections maximize, the diffractive cross section ceases, on the contrary to the expectation based on the partially conserved axial current.

  19. Matrix product state description of Halperin states

    Science.gov (United States)

    Crépel, V.; Estienne, B.; Bernevig, B. A.; Lecheminant, P.; Regnault, N.

    2018-04-01

    Many fractional quantum Hall states can be expressed as a correlator of a given conformal field theory used to describe their edge physics. As a consequence, these states admit an economical representation as an exact matrix product state (MPS) that was extensively studied for the systems without any spin or any other internal degrees of freedom. In that case, the correlators are built from a single electronic operator, which is primary with respect to the underlying conformal field theory. We generalize this construction to the archetype of Abelian multicomponent fractional quantum Hall wave functions, the Halperin states. These can be written as conformal blocks involving multiple electronic operators and we explicitly derive their exact MPS representation. In particular, we deal with the caveat of the full wave-function symmetry and show that any additional SU(2) symmetry is preserved by the natural MPS truncation scheme provided by the conformal dimension. We use our method to characterize the topological order of the Halperin states by extracting the topological entanglement entropy. We also evaluate their bulk correlation lengths, which are compared to plasma analogy arguments.

  20. Talking about Relations : Factors Influencing the Production of Relational Descriptions

    NARCIS (Netherlands)

    Baltaretu, Adriana-Alexandra; Krahmer, Emiel; van Wijk, Carel; Maes, Alfons

    2016-01-01

    In a production experiment (Experiment 1) and an acceptability rating one (Experiment 2), we assessed two factors, spatial position and salience, which may influence the production of relational descriptions (such as “the ball between the man and the drawer”). In Experiment 1, speakers were asked to

  1. Production Logistics Simulation Supported by Process Description Languages

    Directory of Open Access Journals (Sweden)

    Bohács Gábor

    2016-03-01

    Full Text Available The process description languages are used in the business may be useful in the optimization of logistics processes too. The process description languages would be the obvious solution for process control, to handle the main sources of faults and to give a correct list of what to do during the logistics process. Related to this, firstly, the paper presents the main features of the frequent process description languages. The following section describes the currently most used process modelling languages, in the areas of production and construction logistics. In addition, the paper gives some examples of logistics simulation, as another very important field of logistics system modelling. The main edification of the paper, the logistics simulation supported by process description languages. The paper gives a comparison of a Petri net formal representation and a Simul8 model, through a construction logistics model, as the major contribution of the research.

  2. Architecture Descriptions. A Contribution to Modeling of Production System Architecture

    DEFF Research Database (Denmark)

    Jepsen, Allan Dam; Hvam, Lars

    a proper understanding of the architecture phenomenon and the ability to describe it in a manner that allow the architecture to be communicated to and handled by stakeholders throughout the company. Despite the existence of several design philosophies in production system design such as Lean, that focus...... a diverse set of stakeholder domains and tools in the production system life cycle. To support such activities, a contribution is made to the identification and referencing of production system elements within architecture descriptions as part of the reference architecture framework. The contribution...

  3. CAMAC - A modular instrumentation system for data handling. Revised description and specification

    International Nuclear Information System (INIS)

    1977-03-01

    CAMAC is a modern data handling system in widespread use with on-line digital computers. It is based on a digital highway for data and control. The CAMAC specifications ensures compatibility between equipment from different sources. The revised specification introduces several new features, but is consistent with the previous version (EUR 4100e, 1969). The CAMAC system was specified by European laboratories, through the Esone Committee, and has been endorsed by the USAEC NIM Committee, who have an identical specification (TID-25875)

  4. Radionuclide transfer to animal products: revised recommended transfer coefficient values

    International Nuclear Information System (INIS)

    Howard, B.J.; Beresford, N.A.; Barnett, C.L.; Fesenko, S.

    2009-01-01

    A compilation has been undertaken of data which can be used to derive animal product transfer coefficients for radionuclides, including an extensive review of Russian language information. The resultant database has been used to provide recommended transfer coefficient values for a range of radionuclides to (i) cow, sheep and goat milk, (ii) meat (muscle) of cattle, sheep, goats, pigs and poultry and (iii) eggs. The values are used in a new IAEA handbook on transfer parameters which replaces that referred to as 'TRS 364'. The paper outlines the approaches and procedures used to identify and collate data, and assumptions used. There are notable differences between the TRS 364 'expected' values and the recommended values in the revised Handbook from the new database. Of the recommended values, three milk values are at least an order of magnitude higher than the TRS 364 values (Cr, Pu (cow) Pu (sheep)) and one milk value is lower (Ni (cow)). For meat, four values (Am, Cd, Sb (beef) I (pork)) are at least an order of magnitude higher than the TRS 364 values and eight values are at least an order of magnitude lower (Ru, Pu (beef), Ru, Sr, Zn (sheep), Ru, Sr (pork), Mn (poultry)). Many data gaps remain

  5. Radionuclide transfer to animal products: revised recommended transfer coefficient values

    Energy Technology Data Exchange (ETDEWEB)

    Howard, B.J. [Centre for Ecology and Hydrology, Lancaster Environment Centre, Library Avenue, Bailrigg, Lancaster LAI 4AP (United Kingdom)], E-mail: bjho@ceh.ac.uk; Beresford, N.A.; Barnett, C.L. [Centre for Ecology and Hydrology, Lancaster Environment Centre, Library Avenue, Bailrigg, Lancaster LAI 4AP (United Kingdom); Fesenko, S. [International Atomic Energy Agency, 1400 Vienna (Austria)

    2009-03-15

    A compilation has been undertaken of data which can be used to derive animal product transfer coefficients for radionuclides, including an extensive review of Russian language information. The resultant database has been used to provide recommended transfer coefficient values for a range of radionuclides to (i) cow, sheep and goat milk, (ii) meat (muscle) of cattle, sheep, goats, pigs and poultry and (iii) eggs. The values are used in a new IAEA handbook on transfer parameters which replaces that referred to as 'TRS 364'. The paper outlines the approaches and procedures used to identify and collate data, and assumptions used. There are notable differences between the TRS 364 'expected' values and the recommended values in the revised Handbook from the new database. Of the recommended values, three milk values are at least an order of magnitude higher than the TRS 364 values (Cr, Pu (cow) Pu (sheep)) and one milk value is lower (Ni (cow)). For meat, four values (Am, Cd, Sb (beef) I (pork)) are at least an order of magnitude higher than the TRS 364 values and eight values are at least an order of magnitude lower (Ru, Pu (beef), Ru, Sr, Zn (sheep), Ru, Sr (pork), Mn (poultry)). Many data gaps remain.

  6. Cambrian archaeocyathan metazoans: revision of morphological characters and standardization of genus descriptions to establish an online identification tool

    Directory of Open Access Journals (Sweden)

    Adeline Kerner

    2011-11-01

    Full Text Available Archaeocyatha represent the oldest calcified sponges and the first metazoans to build bioconstructions in association with calcimicrobes. They are a key group in biology, evolutionary studies, biostratigraphy, paleoecology and paleogeography of the early Cambrian times. The establishing of a new standardized terminology for archaeocyathans description has permitted the creation of the first knowledge base in English including descriptions of all archaeocyathan genera. This base, using the XPER² software package, is an integral part of the -Archaeocyatha- a knowledge base website, freely available at url http://www.infosyslab.fr/archaeocyatha. The website is composed of common information about Archaeocyatha, general remarks about the knowledge base, the description of the 307 genera recognized with images of type-specimens of type-species for each genus, as well as additional morphological data, an interactive free access key and its user guide.The automatic analysis and comparison of the digitized descriptions have identified some genera with highly similar morphology. These results are a great help for future taxonomic revisions and suggest a number of possible synonymies that require further study.

  7. Talking about relations: Factors influencing the production of relational descriptions

    Directory of Open Access Journals (Sweden)

    Adriana eBaltaretu

    2016-02-01

    Full Text Available In a production experiment (Experiment 1 and an acceptability rating one (Experiment 2, we assessed two factors, spatial position and salience, which may influence the production of relational descriptions (such as the ball between the man and the drawer. In Experiment 1, speakers were asked to refer unambiguously to a target object (a ball. In Experiment 1a, we addressed the role of spatial position, more specifically if speakers mention the entity positioned leftmost in the scene as (first relatum. The results showed a preference to start with the left entity, however, only as a trend, which leaves room for other factors that could influence spatial reference. Thus, in the following studies, we varied salience systematically, by making one of the relatum candidates animate (Experiment 1b, and by adding attention capture cues, first subliminally by priming one relatum candidate with a flash (Experiment 1c, then explicitly by using salient colors for objects (Experiment 1d. Results indicate that spatial position played a dominant role. Entities on the left were mentioned more often as (first relatum than those on the right (Experiment 1a, 1b, 1c, 1d. Animacy affected reference production in one out of three studies (in Experiment 1d. When salience was manipulated by priming visual attention or by using salient colors, there were no significant effects (Experiment 1c, 1d. In the acceptability rating study (Experiment 2, participants expressed their preference for specific relata, by ranking descriptions on the basis of how good they thought the descriptions fitted the scene. Results show that participants preferred most the description that had an animate entity as the first mentioned relatum. The relevance of these results for models of reference production is discussed.

  8. Developing an Emergency Physician Productivity Index Using Descriptive Health Analytics.

    Science.gov (United States)

    Khalifa, Mohamed

    2015-01-01

    Emergency department (ED) crowding became a major barrier to receiving timely emergency care. At King Faisal Specialist Hospital and Research Center, Saudi Arabia, we identified variables and factors affecting crowding and performance to develop indicators to help evaluation and improvement. Measuring efficiency of work and activity of throughput processes; it was important to develop an ED physician productivity index. Data on all ED patients' encounters over the last six months of 2014 were retrieved and descriptive health analytics methods were used. Three variables were identified for their influence on productivity and performance; Number of Treated Patients per Physician, Patient Acuity Level and Treatment Time. The study suggested a formula to calculate the productivity index of each physician through dividing the Number of Treated Patients by Patient Acuity Level squared and Treatment Time to identify physicians with low productivity index and investigate causes and factors.

  9. A revision of the Larainae (Coleoptera, Elmidae) of Venezuela, with description of nine new species

    Science.gov (United States)

    Maier, Crystal A.

    2013-01-01

    Abstract The species of the riffle beetle subfamily Larainae occurring in Venezuela are revised. Examination of 756 specimens yielded 22 species in nine genera occurring throughout the country. Seven species are newly recorded from the country: Phanoceroides sp. 1, Phanocerus clavicornis Sharp, 1882, Phanocerus congener Grouvelle, 1898, Pharceonus volcanus Spangler & Santiago-Fragoso, 1992, Disersus dasycolus Spangler & Santiago-Fragoso, 1992, Disersus chibcha Spangler & Santiago-Fragoso, 1987, and Disersus inca Spangler & Santiago-Fragoso, 1992. Nine species are found to be new to science, which are here described: Hexanchorus dentitibialis sp. n., H. falconensis sp. n., H. flintorum sp. n., H. homaeotarsoides sp. n., H. inflatus sp. n., Phanocerus rufus sp. n., Pharceonus grandis sp. n., Pharceonus ariasi sp. n., Potamophilops bostrychophallus sp. n. Additionally, a key to species, distribution maps, and photographs and genitalia illustrations are provided for all species. PMID:24146552

  10. A Description of the Revised ATHEANA (A Technique for Human Event Analysis)

    International Nuclear Information System (INIS)

    FORESTER, JOHN A.; BLEY, DENNIS C.; COOPER, SUSANE; KOLACZKOWSKI, ALAN M.; THOMPSON, CATHERINE; RAMEY-SMITH, ANN; WREATHALL, JOHN

    2000-01-01

    This paper describes the most recent version of a human reliability analysis (HRA) method called ''A Technique for Human Event Analysis'' (ATHEANA). The new version is documented in NUREG-1624, Rev. 1 [1] and reflects improvements to the method based on comments received from a peer review that was held in 1998 (see [2] for a detailed discussion of the peer review comments) and on the results of an initial trial application of the method conducted at a nuclear power plant in 1997 (see Appendix A in [3]). A summary of the more important recommendations resulting from the peer review and trial application is provided and critical and unique aspects of the revised method are discussed

  11. Impaction grafting in the femur in cementless modular revision total hip arthroplasty: a descriptive outcome analysis of 243 cases with the MRP-TITAN revision implant

    Directory of Open Access Journals (Sweden)

    Wimmer Matthias D

    2013-01-01

    Full Text Available Abstract Background We present a descriptive and retrospective analysis of revision total hip arthroplasties (THA using the MRP-TITAN stem (Peter Brehm, Weisendorf, GER with distal diaphyseal fixation and metaphyseal defect augmentation. Our hypothesis was that the metaphyseal defect augmentation (Impaction Bone Grafting improves the stem survival. Methods We retrospectively analyzed the aggregated and anonymized data of 243 femoral stem revisions. 68 patients with 70 implants (28.8% received an allograft augmentation for metaphyseal defects; 165 patients with 173 implants (71.2% did not, and served as controls. The mean follow-up was 4.4 ± 1.8 years (range, 2.1–9.6 years. There were no significant differences (p > 0.05 between the study and control group regarding age, body mass index (BMI, femoral defects (types I-III as described by Paprosky, and preoperative Harris Hip Score (HHS. Postoperative clinical function was evaluated using the HHS. Postoperative radiologic examination evaluated implant stability, axial implant migration, signs of implant loosening, periprosthetic radiolucencies, as well as bone regeneration and resorption. Results There were comparable rates of intraoperative and postoperative complications in the study and control groups (p > 0.05. Clinical function, expressed as the increase in the postoperative HHS over the preoperative score, showed significantly greater improvement in the group with Impaction Bone Grafting (35.6 ± 14.3 vs. 30.8 ± 15.8; p ≤ 0.05. The study group showed better outcome especially for larger defects (types II C and III as described by Paprosky and stem diameters ≥ 17 mm. The two groups did not show significant differences in the rate of aseptic loosening (1.4% vs. 2.9% and the rate of revisions (8.6% vs. 11%. The Kaplan-Meier survival for the MRP-TITAN stem in both groups together was 93.8% after 8.8 years. [Study group 95.7% after 8.54 years ; control group 93

  12. A descriptive quantitative study on multi-ethnic patient satisfaction with nursing care measured by the Revised Humane Caring Scale.

    Science.gov (United States)

    Goh, Mien Li; Ang, Emily N K; Chan, Yiong-Huak; He, Hong-Gu; Vehviläinen-Julkunen, Katri

    2016-08-01

    To determine patients' satisfaction with nursing care during hospitalization. Limited studies reporting patients' satisfaction with quality of nursing care in Singapore. A descriptive study was conducted in a tertiary hospital in Singapore. Data were collected from 270 adult patients using the Revised Humane Caring Scale. Patients were moderately satisfied with the nursing care. There were significant differences of patients' level of satisfaction between/among socio-demographic subgroups including ethnicity, gender, reasons for admission and disciplines. Chinese patients were least satisfied with nursing care. The patients were most satisfied with 'Respecting patient's feeling' (mean=82.29, SD=14.50) and least satisfied with 'Communication and participation' (mean=62.00, SD=16.46). Our results reinforced the need to pay more attention to patient information provision and effective communication, which could improve patient satisfaction. The multi-ethnic patients valued respect as an influential attribute in quality nursing care. Copyright © 2016 Elsevier Inc. All rights reserved.

  13. Taxonomic revision of the South American catfish genus Ageneiosus (Siluriformes: Auchenipteridae) with the description of four new species

    Science.gov (United States)

    Ribeiro, Frank R.V.; Rapp Py-Daniel, Lúcia H.; Walsh, Stephen J.

    2017-01-01

    The catfish genus Ageneiosus in the exclusively Neotropical family Auchenipteridae is revised. Species of Ageneiosus are widely distributed in all major South American continental drainages except the São Francisco River basin and small rivers along the Brazilian east coast. The taxonomic revision was based on examination of available type specimens, additional museum material and comparisons of original descriptions. A suite of morphometric, meristic and qualitative characters of internal and external anatomy were used to diagnose valid species and determine synonyms. Thirteen valid species are recognized in the genus Ageneiosus, some of which are widely distributed across South America. Ageneiosus pardalis is the only trans-Andean species in the genus. Ageneiosus polystictus and Ageneiosus uranophthalmus are more widely distributed than previously reported. Ageneiosus marmoratus is a junior synonym of Ageneiosus inermis. Ageneiosus dentatus is a valid species and its name is removed from the synonymy of Ageneiosus ucayalensis. Four new species are described: Ageneiosus akamai, Ageneiosus apiaka, Ageneiosus intrusus and Ageneiosus lineatus, all from the Amazon River basin. A dichotomous key for all 13 valid species of Ageneiosus species is provided.

  14. Revision of the genus Ommatoiulus Latzel, 1884 (Julida, Diplopoda in Portugal, with description of six new species

    Directory of Open Access Journals (Sweden)

    Nesrine Akkari

    2017-03-01

    Full Text Available In this work we present a revision of the genus Ommatoiulus Latzel, 1884 in Portugal. Based on recently collected material and older museum samples, including type specimens, we describe six new species to science, viz. Ommatoiulus alacygni sp. nov., O. camurus sp. nov., O. denticulatus sp. nov., O. litoralis sp. nov., O. staglae sp. nov. and O. stellaris sp. nov. The species O. alacygni sp. nov., O. denticulatus sp. nov. and O. staglae sp. nov. described from the Algarve are outstanding by their extremely reduced mesomerital process. The species O. porathi (Verhoeff, 1893 and O. andalusius (Attems, 1927 are recorded and redescribed for the first time after their original description. The finding of O. andalusius – originally described from Andalusia in Spain – constitutes a new record for Portugal together with two species, viz. O. fuentei (Brolemann, 1920 and O. martensi Mauriès, 1969. The taxonomic status of several species is revised. Thus Archiulus (Schistocoxitus cingulatus Attems, 1927 is here considered as a junior synonym of Ommatoiulus lusitanus (Verhoeff, 1895 while Schizophyllum cervinum Verhoeff, 1910 is synonymized with Ommatoiulus moreleti (Lucas, 1860. An identification key to all hitherto known Portuguese species of Ommatoiulus is presented as well as a distribution map illustrating the various species occurrences in the country.

  15. Revision of the genus Vanenga Schaus, 1928 (Lepidoptera, Mimallonoidea, Mimallonidae with the description of a new species

    Directory of Open Access Journals (Sweden)

    Ryan St. Laurent

    2017-01-01

    Full Text Available Vanenga Schaus, 1928, like many other Mimallonidae genera being revised in recent years, has not been studied since Schaus (1928 in his revision of the family. This currently monotypic genus is entirely restricted to South America, with no known representatives in Central or North America. Prior to this work, Schaus (1928 and subsequent lists of the family (Gaede 1931, Becker 1996 have mentioned the single species V. mera (Dognin, 1924 described from the Brazilian Amazon (Pará state. In Schaus (1928 this species is listed as occurring in both Amazonia and southeastern Brazil. In completing the present article, numerous “type” specimens have been discovered bearing three different manuscript names associated with the populations of southeastern Brazil and adjacent areas. Despite the fact that these names were written on various labels, the absence of any published descriptions results in them being unavailable (ICZN 1999. Therefore, this distinct southern South American species is now officially recognized and formally described, as well as providing a much more thorough distribution for both Vanenga species, including many new records for V. mera.

  16. Revision of the Afrotropical species of Pristomerus (Ichneumonidae: Cremastinae, with descriptions of 31 new species

    Directory of Open Access Journals (Sweden)

    Pascal Rousse

    2015-05-01

    Full Text Available We revised the species of the genus Pristomerus Curtis, 1836 in the Afrotropical Region. Fortynine species are recognized, of which 31 are newly described. The following new species are described: P. afrikaner, P. aka, P. babinga, P. bemba, P. dikidiki, P. herero, P. hutu, P. kagga, P. khoikhoi, P. kuku, P. masai, P. mbaka, P. mbama, P. mboum, P. nzakara, P. protea, P. restio, P. san, P. sara, P. sotho, P. swahili, P. teke, P. tutsi, P. venda, P. wolof, P. xhosa, P. yakoma, P. yangere, P. yoccolo, P. zande and P. zulu spp. nov. New synonyms: P. africator, P. cunctator and P. luteolus are new junior synonyms of P. pallidus. New records: new host records are reported for the widespread P. pallidus; new country-level distribution records are added for P. bullis, P. keyka, P. kelikely and P. pallidus; and reports of Trathala concolor and P. veloma in South Africa are shown to have been erroneous. An illustrated dichotomous key to females is provided; an online Lucid interactive matrix key is also available at www.waspweb.org. Finally, the ecological and geographical correlates of colour patterns exhibited by Pristomerus in the Afrotropical region are discussed.

  17. Revision of the South American Fonckia (Opiliones: Gonyleptidae: Pachylinae with the description of two new species

    Directory of Open Access Journals (Sweden)

    Marília Pessoa Silva

    2013-04-01

    Full Text Available Fonckia Roewer, 1913 is revised and two new species are described in it: Fonckia contulmo sp. nov., from Monumento Nacional Contulmo, Araucanía, Chile, diagnosed mainly by the enlarged tubercles on the lateral margins of the dorsal scutum, between the median region of scutal area II and the posterior margin of the scutal area III; and Fonckia sosia sp. nov., from Parque Nacional Conguillio, Malleco, Chile, distinguished mainly by the absence of a dorso-basal apophysis on femur IV of the male and a spiniform, enlarged retroapical tubercle on tibia IV of the male. We propose the generic synonymy of Diconospelta Canals, 1934 under Fonckia Roewer, 1913, and the specific synonymy of D. vazferreirae Mello-Leitão, 1946 under F. processigera (Sørensen, 1902. We also propose the new combination F. gallardoi (Canals, 1934 comb. nov. As a consequence, the genus is henceforth composed of four species. We present an identification key for the species of Fonckia, as well as diagnoses and a discussion of the Chilean Pachylinae.

  18. HIGHWAY, a transportation routing model: program description and revised users' manual

    International Nuclear Information System (INIS)

    Joy, D.S.; Johnson, P.E.

    1983-10-01

    A computerized transportation routing model has been developed at the Oak Ridge National Laboratory to be used for predicting likely routes for shipping radioactive materials. The HIGHWAY data base is a computerized road atlas containing descriptions of the entire Interstate System, the federal highway system, and most of the principal state roads. In addition to its prediction of the most likely commercial route, options incorporated in the HIGHWAY model can allow for maximum use of Interstate highways or routes that will bypass urbanized areas containing populations greater than 100,000 persons. The user may also interactively modify the data base to predict routes that bypass any particular state, city, town, or specific highway segment

  19. Microscopic description of production cross sections including deexcitation effects

    Science.gov (United States)

    Sekizawa, Kazuyuki

    2017-07-01

    Background: At the forefront of the nuclear science, production of new neutron-rich isotopes is continuously pursued at accelerator laboratories all over the world. To explore the currently unknown territories in the nuclear chart far away from the stability, reliable theoretical predictions are inevitable. Purpose: To provide a reliable prediction of production cross sections taking into account secondary deexcitation processes, both particle evaporation and fission, a new method called TDHF+GEMINI is proposed, which combines the microscopic time-dependent Hartree-Fock (TDHF) theory with a sophisticated statistical compound-nucleus deexcitation model, GEMINI++. Methods: Low-energy heavy ion reactions are described based on three-dimensional Skyrme-TDHF calculations. Using the particle-number projection method, production probabilities, total angular momenta, and excitation energies of primary reaction products are extracted from the TDHF wave function after collision. Production cross sections for secondary reaction products are evaluated employing GEMINI++. Results are compared with available experimental data and widely used grazing calculations. Results: The method is applied to describe cross sections for multinucleon transfer processes in 40Ca+124Sn (Ec .m .≃128.54 MeV ), 48Ca+124Sn (Ec .m .≃125.44 MeV ), 40Ca+208Pb (Ec .m .≃208.84 MeV ), 58Ni+208Pb (Ec .m .≃256.79 MeV ), 64Ni+238U (Ec .m .≃307.35 MeV ), and 136Xe+198Pt (Ec .m .≃644.98 MeV ) reactions at energies close to the Coulomb barrier. It is shown that the inclusion of secondary deexcitation processes, which are dominated by neutron evaporation in the present systems, substantially improves agreement with the experimental data. The magnitude of the evaporation effects is very similar to the one observed in grazing calculations. TDHF+GEMINI provides better description of the absolute value of the cross sections for channels involving transfer of more than one proton, compared to the grazing

  20. The family of standard hydrogen monitoring system computer software design description: Revision 2

    International Nuclear Information System (INIS)

    Bender, R.M.

    1994-01-01

    In March 1990, 23 waste tanks at the Hanford Nuclear Reservation were identified as having the potential for the buildup of gas to a flammable or explosive level. As a result of the potential for hydrogen gas buildup, a project was initiated to design a standard hydrogen monitoring system (SHMS) for use at any waste tank to analyze gas samples for hydrogen content. Since it was originally deployed three years ago, two variations of the original system have been developed: the SHMS-B and SHMS-C. All three are currently in operation at the tank farms and will be discussed in this document. To avoid confusion in this document, when a feature is common to all three of the SHMS variants, it will be referred to as ''The family of SHMS.'' When it is specific to only one or two, they will be identified. The purpose of this computer software design document is to provide the following: the computer software requirements specification that documents the essential requirements of the computer software and its external interfaces; the computer software design description; the computer software user documentation for using and maintaining the computer software and any dedicated hardware; and the requirements for computer software design verification and validation

  1. Revision of the jawfish genus Lonchopisthus with description of a new Atlantic species (Teleostei: Opistognathidae)

    Science.gov (United States)

    Smith-Vaniz, William F.; Walsh, Stephen J.

    2017-01-01

    Synonymies, diagnoses, descriptions, illustrations, an identification key, and meristic frequency tables are provided for all species of Lonchopisthus. Most of the skeletal anatomy of L. higmani is also illustrated. A new jawfish, Lonchopisthus ancistrus n. sp., is described from the Gulf of Mexico and off Honduras based on 21 specimens 41–89 mm SL. The new species differs from other congeners by the following combination of characters: the posterior end of the maxilla strongly hooked; the membrane connecting the maxilla and premaxilla and the inner membrane covering the posterior part of the dentary pale; segmented dorsal-fin rays 11–13, with unbranched rays 2–5; longitudinal body-scale rows 33–39; and very long pelvic fins, 39.4–75.3% SL. Lonchopisthus lemur (and its synonym L. meadi) shares most characters with L. ancistrus, but differs in having shorter pelvic fins, 19.2–29.9% SL; fewer longitudinal body-scale rows, 26–33; and 5 infraorbitals (vs. 4). Both are relatively deep-water species, occurring from 100 m to at least 375 m (vs. 3–139 m in the other species). Lonchopisthus micrognathus is unique in having no branched caudal-fin rays at any size and the middle caudal-fin rays with free tips that may be used to maintain tactile contact with the substrate while hovering over its burrow. The western Atlantic Lonchopisthus higmani and eastern Pacific L. sinuscalifornicus are sister species that differ from the other Atlantic species in having the posterior end of the maxilla with a notch instead of a strong hook, the opercle with a large dark blotch, and one supraneural (vs. no supraneural).

  2. 77 FR 59418 - Notice of Initial Determination Revising the List of Products Requiring Federal Contractor...

    Science.gov (United States)

    2012-09-27

    ... of products requiring federal contractor certification as to the use of forced or indentured child... DEPARTMENT OF LABOR Notice of Initial Determination Revising the List of Products Requiring Federal Contractor Certification as to Forced/Indentured Child Labor Pursuant to Executive Order 13126...

  3. 76 FR 61384 - Notice of Initial Determination Revising the List of Products Requiring Federal Contractor...

    Science.gov (United States)

    2011-10-04

    ... Maintenance of the List of Products Requiring Federal Contractor Certification as to Forced or Indentured... DEPARTMENT OF LABOR Notice of Initial Determination Revising the List of Products Requiring Federal Contractor Certification as to Forced/Indentured Child Labor Pursuant to Executive Order 13126...

  4. Revision of the camel spider genus Eremocosta Roewer and a description of the female Eremocosta gigas Roewer (Arachnida, Solifugae).

    Science.gov (United States)

    Cushing, Paula E; Channiago, Felix; Brookhart, Jack O

    2018-03-29

    A recent phylogenetic analysis demonstrated that the solifuge genus Eremocosta (Eremobatidae), although not monophyletic, formed a strongly supported group, rendered paraphyletic by the exclusion of E. acuitlapanensis, which we herein determine is misplaced in this genus. We revise the taxonomy of the genus Eremocosta. Nine species of the 13 currently placed in the genus are retained, E. bajaensis (Muma 1986), E. calexicensis (Muma 1951), E. formidabilus (Simon 1879), E. gigas Roewer 1934, E. gigasella (Muma 1970), E. spinipalpis (Kraepelin 1899), E. striata (Putnam 1883), and E. titania (Muma 1951). Eremocosta fusca (Muma 1986) and E. montezuma (Roewer 1934) are returned to the genus Eremorhax along with E. arenarum. Eremocosta hystrix and Eremocosta acuitlapanensis (Vázquez Gaviño-Rojas 2000) are transferred to Eremobates. We re-evaluated E. nigrimana (Pocock 1895) and determined that, since the type shows the ventrodistal concavity (VDC) diagnostic for the genus Eremocosta, it should be retained in that genus; however, because the type locality is identified as Afghanistan, far outside the range of any Eremobatidae, its status and placement remain uncertain. Eremocosta robusta (Roewer 1934) was designated nomen dubium by Muma and we maintain this designation. We provide a key to the species of Eremocosta and provide a description of the female of E. gigas.

  5. Emended description of Campylobacter sputorum and revision of its infrasubspecific (biovar) divisions, including C-sputorum biovar paraureolyticus, a urease-producing variant from cattle and humans

    DEFF Research Database (Denmark)

    On, S.L.W.; Atabay, H.I.; Corry, J.E.L.

    1998-01-01

    A polyphasic taxonomic study of 15 bovine and human strains assigned to the catalase-negative, urease-positive campylobacter (CNUPC) group identified these bacteria as a novel, ureolytic biovar of Campylobacter sputorum for which we propose the name C. sputorum bv. paraureolyticus: suitable...... should be revised to include by. sputorum for catalase-negative strains; by. fecalis for catalase-positive strains; and by. paraureolyticus for urease-positive strains. Strains classified previously as by. bubulus should be reclassified as by. sputorum. The species description of C. sputorum is revised...

  6. 40 CFR 407.20 - Applicability; description of the apple products subcategory.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 28 2010-07-01 2010-07-01 true Applicability; description of the apple... SOURCE CATEGORY Apple Products Subcategory § 407.20 Applicability; description of the apple products... apples into apple products. The processing of apples into caustic peeled or dehydrated products is...

  7. New Product Development in Traditional Industries: Decision-Making Revised

    Directory of Open Access Journals (Sweden)

    Jon Mikel Zabala-Iturriagagoitia

    2012-02-01

    Full Text Available This paper investigates whether decisions considered as common in new product development literature are also valid in a region characterized by traditional industries. The research is grounded on innovative companies in the Valencian Region (Spain. Using the statistical tool of factor analysis, we test if the groups of decisions identified by the literature can be confirmed in our empirical sample. Therewith, we aim to link the theoretical and empirical fields in the context of new product development and product innovation management.

  8. 40 CFR 415.50 - Applicability; description of the calcium oxide production subcategory.

    Science.gov (United States)

    2010-07-01

    ... calcium oxide production subcategory. 415.50 Section 415.50 Protection of Environment ENVIRONMENTAL... SOURCE CATEGORY Calcium Oxide Production Subcategory § 415.50 Applicability; description of the calcium... the production of calcium oxide. ...

  9. Final environmental impact statement, Beaufort Sea oil and gas development/Northstar Project. Appendix A: BP Exploration (Alaska) Inc. Final project description - Revision 1, March 27, 1997

    International Nuclear Information System (INIS)

    1999-02-01

    BP Exploration (Alaska) Inc. (BPXA) submitted a permit application to the US Army Engineer District, Alaska to initiate the review process for BPXA's plans to develop and produce oil and gas from the Northstar Unit. This report contains Appendix A of an Environmental Impact Statement which was undertaken to identify and evaluate the potential effects the proposed project may have on the environment. This document is the Northstar Development Project, Final Project Description, Revision 1 for BPXA Northstar Project

  10. A revision of the Eudarcia glaseri-species group (Lepidoptera, Meessiidae) with description of two new species from Greece and Crimea.

    Science.gov (United States)

    Bidzilya, Oleksiy V; Budashkin, Yury I; Gaedike, Reinhard

    2016-10-31

    The Eudarcia glaseri-species group is revised. Four species are recognized, two of which are described as new: E. ignorata, sp. n. (Greece) and E. saxatilis, sp. n. (Crimea). E. abchasicum (Zagulajev, 1979) status rev., bona sp. is recalled from synonymy of E. glaseri. Re-descriptions and an identification key for all four species are given. The hitherto unknown females of E. glaseri (Petersen, 1967) and E. armatum (Gaedike, 1985) are described.

  11. 75 FR 50771 - Draft Revised Guidance for Industry on Residual Solvents in New Veterinary Medicinal Products...

    Science.gov (United States)

    2010-08-17

    ...] (formerly Docket No. 1999D-4071) Draft Revised Guidance for Industry on Residual Solvents in New Veterinary...) entitled ``Residual Solvents in New Veterinary Medicinal Products, Active Substances and Excipients... 2001 final guidance), has been developed for veterinary use by the International Cooperation on...

  12. Report revision master: an energy analysis of consumer products packaging

    Energy Technology Data Exchange (ETDEWEB)

    1980-03-01

    This report serves as a foundation for quantifying the potential for energy conservation in the Canadian consumer products packaging sector. Investigation was made of energy consumption, waste management, and energy conservation potential in the various stages of the packaging and consumption process: raw material acquisition, material and packaging manufacture, package filling and distribution, consumer use, post-consumption options (energy recovery, disposal, recycling), and cleaning and transportation (if applicable) between each stage. The food and beverage industry was singled out as the most important sector because of its large consumption of packaging. Significant opportunities for energy conservation were found, although any savings accomplished through packaging changes appear to be difficult to implement. Packaging energy savings seem to be able to be achieved only through a product-by-product, industry-by-industry initiative by means of product and package standardization. An efficient example of this is the milk distribution system, where refillable plastic jugs require only 1.4 MBtu per 3000 quarts delivered (as compared with, for example, 68.9 MBtu for disposable aluminium soft drink cans). Other conclusions are made concerning the optimization of packaging energy, with respect to types of packaging, energy requirements related to use of packaged products, impact of government policies and of retailing techiques, consumer lifestyles, and the like. 95 refs., 3 figs., 54 tabs.

  13. Revised models and genetic parameter estimates for production and ...

    African Journals Online (AJOL)

    Genetic parameters for production and reproduction traits in the Elsenburg Dormer sheep stud were estimated using records of 11743 lambs born between 1943 and 2002. An animal model with direct and maternal additive, maternal permanent and temporary environmental effects was fitted for traits considered traits of the ...

  14. Tire Production and Pollution Control. Environmental Education Curriculum. Revised.

    Science.gov (United States)

    Topeka Public Schools, KS.

    This unit was developed to introduce secondary students to the many facets of a typical, large manufacturing plant - the Topeka Goodyear Tire and Rubber Company - in an effort to increase awareness of sound environmental practices in industry. Its five major foci include the production of tires and quality control procedures; applications of…

  15. 40 CFR 415.330 - Applicability; description of the carbon monoxide and by-product hydrogen production subcategory.

    Science.gov (United States)

    2010-07-01

    ... carbon monoxide and by-product hydrogen production subcategory. 415.330 Section 415.330 Protection of... MANUFACTURING POINT SOURCE CATEGORY Carbon Monoxide and By-Product Hydrogen Production Subcategory § 415.330 Applicability; description of the carbon monoxide and by-product hydrogen production subcategory. The provisions...

  16. Method for Developing Descriptions of Hard-to-Price Products: Results of the Telecommunications Product Study

    Energy Technology Data Exchange (ETDEWEB)

    Conrad, F.; Tonn, B.

    1999-05-01

    This report presents the results of a study to test a new method for developing descriptions of hard-to-price products. The Bureau of Labor Statistics (BLS) is responsible for collecting data to estimate price indices such as the Consumers Price Index (BLS) is responsible for collecting data to estimate price indices such as the Consumers Price Index (CPI). BLS accomplishes this task by sending field staff to places of business to price actual products. The field staff are given product checklists to help them determine whether products found today are comparable to products priced the previous month. Prices for non-comparable products are not included in the current month's price index calculations. A serious problem facing BLS is developing product checklists for dynamic product areas, new industries, and the service sector. It is difficult to keep checklists up-to-date and quite often simply to develop checklists for service industry products. Some people estimates that upwards of 50 % of US economic activity is not accounted for in the CPI

  17. 40 CFR 415.270 - Applicability; description of the borax production subcategory.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 28 2010-07-01 2010-07-01 true Applicability; description of the borax... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS INORGANIC CHEMICALS MANUFACTURING POINT SOURCE CATEGORY Borax Production Subcategory § 415.270 Applicability; description of the borax production subcategory. The...

  18. 41 CFR 101-29.102 - Use of metric system of measurement in Federal product descriptions.

    Science.gov (United States)

    2010-07-01

    ... PROCUREMENT 29-FEDERAL PRODUCT DESCRIPTIONS 29.1-General § 101-29.102 Use of metric system of measurement in... measurement in Federal product descriptions. 101-29.102 Section 101-29.102 Public Contracts and Property... Federal agencies to: (a) Maintain close liaison with other Federal agencies, State and local governments...

  19. Description of Latvian Metal Production and Processing Enterprises' Air Emissions

    OpenAIRE

    Pubule, J; Zahare, D; Blumberga, D

    2010-01-01

    The metal production and processing sector in Latvia has acquired a stable position in the national economy. Smelting of ferrous and nonferrous metals, production of metalware, galvanisation, etc. are developed in Latvia. The metal production and processing sector has an impact on air quality due to polluting substances which are released in the air from metal treatment processes. Therefore it is necessary to determine the total volume of emissions produced by the metal production and process...

  20. Towards unification of product and enterprise system descriptions

    CSIR Research Space (South Africa)

    Erasmus, J

    2015-06-01

    Full Text Available are utilised by enterprises and some product systems contain entire businesses, such as the operating and maintenance business of a power station. Thus, products are part of enterprises, but enterprises may also be part of product systems. To enable the design...

  1. A framework for product description classification in e-commerce

    NARCIS (Netherlands)

    Vandic, D.; Frasincar, F.; Kaymak, U.

    We propose the Hierarchical Product Classification (HPC) framework for the purpose of classifying products using a hierarchical product taxonomy. The framework uses a classification system with multiple classification nodes, each residing on a different level of the taxonomy. The innovative part of

  2. Weaner production with low antimicrobial usage: a descriptive study

    DEFF Research Database (Denmark)

    Fertner, Mette Ely; Boklund, Anette; Dupont, Nana Hee

    2015-01-01

    Background: Health, productivity and antimicrobial use in the production of pigs are expected to be interrelated to some extent. Previous studies on register-based data have investigated these correlations with a subsequent large variation residing at the farm level. In order to study such farm f...

  3. Revision of the genus 'Microbrotula' (Teleostei: Bythitidae), with description of two new species and a related new genus

    DEFF Research Database (Denmark)

    Schwarzhans, Werner; Nielsen, Jørgen

    2011-01-01

    Following recent systematic revisions of Anderson (2005, 2007), seven species of the viviparous genus Microbrotula (Teleostei: Bythitidae) have been described, all from the Indo-west Pacific Ocean. Six of these species are here recognised as valid: M. bentleyi, M. greenfieldi, M. punicea, M. quee...

  4. Revision of the ICH guideline on detection of toxicity to reproduction for medicinal products: SWOT analysis.

    Science.gov (United States)

    Barrow, Paul

    2016-09-01

    SWOT analysis was used to gain insights and perspectives into the revision of the ICH S5(R2) guideline on detection of toxicity to reproduction for medicinal products. The current ICH guideline was rapidly adopted worldwide and has an excellent safety record for more than 20 years. The revised guideline should aim to further improve reproductive and developmental (DART) safety testing for new drugs. Alternative methods to animal experiments should be used whenever possible. Modern technology should be used to obtain high quality data from fewer animals. Additions to the guideline should include considerations on the following: limit dose setting, maternal toxicity, biopharmaceuticals, vaccines, testing strategies by indication, developmental immunotoxicity, and male-mediated developmental toxicity. Emerging issues, such as epigenetics and the microbiome, will most likely pose challenges to DART testing in the future. It is hoped that the new guideline will be adopted even outside the ICH regions. Copyright © 2016 Elsevier Inc. All rights reserved.

  5. A revised cranial description of Massospondylus carinatus Owen (Dinosauria: Sauropodomorpha based on computed tomographic scans and a review of cranial characters for basal Sauropodomorpha

    Directory of Open Access Journals (Sweden)

    Kimberley E.J. Chapelle

    2018-01-01

    Full Text Available Massospondylus carinatus is a basal sauropodomorph dinosaur from the early Jurassic Elliot Formation of South Africa. It is one of the best-represented fossil dinosaur taxa, known from hundreds of specimens including at least 13 complete or nearly complete skulls. Surprisingly, the internal cranial anatomy of M. carinatus has never been described using computed tomography (CT methods. Using CT scans and 3D digital representations, we digitally reconstruct the bones of the facial skeleton, braincase, and palate of a complete, undistorted cranium of M. carinatus (BP/1/5241. We describe the anatomical features of the cranial bones, and compare them to other closely related sauropodomorph taxa such as Plateosaurus erlenbergiensis, Lufengosaurus huenei, Sarahsaurus aurifontanalis and Efraasia minor. We identify a suite of character states of the skull and braincase for M. carinatus that sets it apart from other taxa, but these remain tentative due to the lack of comparative sauropodomorph braincase descriptions in the literature. Furthermore, we hypothesize 27 new cranial characters useful for determining relationships in non-sauropodan Sauropodomorpha, delete five pre-existing characters and revise the scores of several existing cranial characters to make more explicit homology statements. All the characters that we hypothesized or revised are illustrated. Using parsimony as an optimality criterion, we then test the relationships of M. carinatus (using BP/1/5241 as a specimen-level exemplar in our revised phylogenetic data matrix.

  6. Weaner production with low antimicrobial usage: a descriptive study

    DEFF Research Database (Denmark)

    Fertner, Mette Ely; Boklund, Anette; Dupont, Nana Hee

    2015-01-01

    Background: Health, productivity and antimicrobial use in the production of pigs are expected to be interrelated to some extent. Previous studies on register-based data have investigated these correlations with a subsequent large variation residing at the farm level. In order to study such farm...... factors in more detail we designed an elaborate interview-guide. By in-depth interviews of farmers with well-managed 7-30 kg (weaner) productions we sought to describe a set of common key-factors characterizing their management practices. Identification of such common practices could be used in follow......-up projects, investigating whether identified factors really are characteristic for good-practicing famers.Results: Eleven farms were selected for a farm visit and in-depth interview. Participating farms used less antimicrobials than the national median (8.2 animal daily doses/100 weaners/day), had...

  7. Regulatory fit effects for injunctive versus descriptive social norms: Evidence from the promotion of sustainable products

    NARCIS (Netherlands)

    Melnyk, V.; Herpen, van E.; Fischer, A.R.H.; Trijp, van J.C.M.

    2013-01-01

    Consumers face marketing messages using social norms in many situations where different goals are dominant. This research examines moderating effects of regulatory focus for descriptive and injunctive norms in the promotion of sustainable products. More specifically, it shows that descriptive norms

  8. 40 CFR 415.640 - Applicability; description of the cadmium pigments and salts production subcategory.

    Science.gov (United States)

    2010-07-01

    ... cadmium pigments and salts production subcategory. 415.640 Section 415.640 Protection of Environment... POINT SOURCE CATEGORY Cadmium Pigments and Salts Production Subcategory § 415.640 Applicability; description of the cadmium pigments and salts production subcategory. The provisions of this subpart are...

  9. 40 CFR 415.340 - Applicability; description of the chrome pigments production subcategory.

    Science.gov (United States)

    2010-07-01

    ... chrome pigments production subcategory. 415.340 Section 415.340 Protection of Environment ENVIRONMENTAL... SOURCE CATEGORY Chrome Pigments Production Subcategory § 415.340 Applicability; description of the chrome pigments production subcategory. This subpart applies to discharges to waters of the United States and...

  10. 40 CFR 415.110 - Applicability; description of the potassium metal production subcategory.

    Science.gov (United States)

    2010-07-01

    ... potassium metal production subcategory. 415.110 Section 415.110 Protection of Environment ENVIRONMENTAL... SOURCE CATEGORY Potassium Metal Production Subcategory § 415.110 Applicability; description of the potassium metal production subcategory. The provisions of this subpart are applicable to discharges...

  11. 40 CFR 415.420 - Applicability; description of the hydrogen cyanide production subcategory.

    Science.gov (United States)

    2010-07-01

    ... hydrogen cyanide production subcategory. 415.420 Section 415.420 Protection of Environment ENVIRONMENTAL... SOURCE CATEGORY Hydrogen Cyanide Production Subcategory § 415.420 Applicability; description of the hydrogen cyanide production subcategory. This subpart applies to discharges to waters of the United States...

  12. 40 CFR 407.40 - Applicability; description of the frozen potato products subcategory.

    Science.gov (United States)

    2010-07-01

    ... frozen potato products subcategory. 407.40 Section 407.40 Protection of Environment ENVIRONMENTAL... PROCESSING POINT SOURCE CATEGORY Frozen Potato Products Subcategory § 407.40 Applicability; description of the frozen potato products subcategory. The provisions of this subpart are applicable to discharges...

  13. 40 CFR 407.50 - Applicability; description of the dehydrated potato products subcategory.

    Science.gov (United States)

    2010-07-01

    ... dehydrated potato products subcategory. 407.50 Section 407.50 Protection of Environment ENVIRONMENTAL... PROCESSING POINT SOURCE CATEGORY Dehydrated Potato Products Subcategory § 407.50 Applicability; description of the dehydrated potato products subcategory. The provisions of this subpart are applicable to...

  14. 40 CFR 415.490 - Applicability; description of the oxygen and nitrogen production subcategory.

    Science.gov (United States)

    2010-07-01

    ... oxygen and nitrogen production subcategory. 415.490 Section 415.490 Protection of Environment... POINT SOURCE CATEGORY Oxygen and Nitrogen Production Subcategory § 415.490 Applicability; description of the oxygen and nitrogen production subcategory. The provisions of this subpart are applicable to...

  15. 40 CFR 415.220 - Applicability; description of the titanium dioxide production subcategory.

    Science.gov (United States)

    2010-07-01

    ... titanium dioxide production subcategory. 415.220 Section 415.220 Protection of Environment ENVIRONMENTAL... SOURCE CATEGORY Titanium Dioxide Production Subcategory § 415.220 Applicability; description of the titanium dioxide production subcategory. This subpart applies to discharges to waters of the United States...

  16. A description of smallholder pig production systems in eastern Indonesia.

    Science.gov (United States)

    Leslie, Edwina E C; Geong, Maria; Abdurrahman, Muktasam; Ward, Michael P; Toribio, Jenny-Ann L M L

    2015-03-01

    Pig farming is a common practice among smallholder farmers in Nusa Tenggara Timur province (NTT), eastern Indonesia. To understand their production systems a survey of smallholder pig farmers was conducted. Eighteen villages were randomly selected across West Timor, Flores and Sumba islands, and 289 pig farmers were interviewed. Information on pig management, biosecurity practices, pig movements and knowledge of pig health and disease, specifically classical swine fever was collected. The mean number of pigs per herd was 5.0 (not including piglets), and total marketable herd size (pigs≥two months of age) did not differ significantly between islands (P=0.215). Chickens (71%) and dogs (62%) were the most commonly kept animal species in addition to pigs. Pigs were mainly kept as a secondary income source (69%) and 83% of farmers owned at least one sow. Seventy-four percent (74%) of pigs were housed in a kandang (small bamboo pen) and 25% were tethered. Pig feeds were primarily locally sourced agricultural products (93%). The majority of farmers had no knowledge of classical swine fever (91%) and biosecurity practices were minimal. Forty-five percent (45%) reported to consuming a pig when it died and 74% failed to report cases of sick or dead pigs to appropriate authorities. Sixty-five percent (65%) of farmers reported that a veterinarian or animal health worker had never visited their village. Backyard slaughter was common practice (55%), with meat mainly used for home consumption (89%). Most (73%) farmers purchased pigs in order to raise the animal on their farm with 36% purchasing at least one pig within the last year. Predominantly fattener pigs (34%) were given as gifts for celebratory events, most commonly for funerals (32%), traditional ceremonies (27%) and marriages (10%). For improved productivity of this traditional low-input system, research incorporating farming training and improved knowledge on pig disease and biosecurity needs to be integrated with

  17. Waste management facilities cost information: System cost model product description. Revision 2

    International Nuclear Information System (INIS)

    Lundeen, A.S.; Hsu, K.M.; Shropshire, D.E.

    1996-02-01

    In May of 1994, Lockheed Idaho Technologies Company (LITCO) in Idaho Falls, Idaho and subcontractors developed the System Cost Model (SCM) application. The SCM estimates life-cycle costs of the entire US Department of Energy (DOE) complex for designing; constructing; operating; and decommissioning treatment, storage, and disposal (TSD) facilities for mixed low-level, low-level, transuranic, and mixed transuranic waste. The SCM uses parametric cost functions to estimate life-cycle costs for various treatment, storage, and disposal modules which reflect planned and existing facilities at DOE installations. In addition, SCM can model new facilities based on capacity needs over the program life cycle. The SCM also provides transportation costs for DOE wastes. Transportation costs are provided for truck and rail and include transport of contact-handled, remote-handled, and alpha (transuranic) wastes. The user can provide input data (default data is included in the SCM) including the volume and nature of waste to be managed, the time period over which the waste is to be managed, and the configuration of the waste management complex (i.e., where each installation's generated waste will be treated, stored, and disposed). Then the SCM uses parametric cost equations to estimate the costs of pre-operations (designing), construction costs, operation management, and decommissioning these waste management facilities

  18. Taxonomic revision of the genus Hirotophora Brown et al. (Diptera: Phoridae) with the description of a new species from Chile.

    Science.gov (United States)

    Ament, Danilo cÉsar

    2018-03-16

    The monotypic genus Hirotophora Brown et al. is revised, with a new species from Chile, Hirotophora chilensis sp. nov., described, and Chaetopleurophora dividua and Chaetopleurophora flavimarginata transferred to this genus. The addition of these species is based on the genus diagnosis, which is amended here, and on the synapomorphies recognized for Hirotophora. All species of the genus are extensively illustrated and new diagnostic characters are described. Females of Hirotophora are more structurally divergent than males, which show almost no conspicuous differences in the male terminalia among the species. This is an uncommon scenario for the subfamily Phorinae, and may relate to still-unknown life history particularities of the species of this genus.

  19. Revised concept of the fossil genus Oviparosiphum Shaposhnikov, 1979 with the description of a new genus (Hemiptera, Sternorrhyncha, Aphidomorpha

    Directory of Open Access Journals (Sweden)

    Dagmara Żyła

    2015-02-01

    Full Text Available This paper presents a revision of the aphid genus Oviparosiphum, which is known from the Cretaceous period. Redescriptions of two species: O. jakovlevi Shaposhnikov, 1979 and O. baissense Shaposhnikov & Wegierek, 1989 are made, and an updated diagnosis of this genus is provided. Oviparosiphum baissense is the type species of a newly described genus Archeoviparosiphum gen. n. Five other species of Oviparosiphum are also transferred to the new genus. The basis for their separation from Oviparosiphum is the structure of the siphunculi and ovipositor. A key is provided to the genera of Oviparosiphidae.

  20. Revision and implementation of ISO 9001 of the 99Mo fission production process

    International Nuclear Information System (INIS)

    Cintas, Ana

    2003-01-01

    The work involves the survey of the plant production processes in order to analyze their strengths and weaknesses related to process improvements.Such a task includes the documentation system - procedures, instruction manual, descriptions, documents, operation plans, trials and control and the quality plan with the ultimate goal of obtaining certification according to ISO 9001:2000, quality management standard for the fission 9 9Mo production plant at Ezeiza Atomic Center

  1. R-1 (C-620-A) and R-2 (C-620-B) air compressor control logic, computer software description. Revision 1

    International Nuclear Information System (INIS)

    Walter, K.E.

    1995-01-01

    This document provides an updated computer software description for the software used on the FFTF R-1 (C-620-A) and R-2 (C-620-B) air compressor programmable controllers. Logic software design changes were required to allow automatic starting of a compressor that had not been previously started

  2. Revised and enlarged edition: editorial production as an artistic and a literary genre

    Directory of Open Access Journals (Sweden)

    Sofia Gonçalves

    2016-07-01

    Full Text Available The appropriation of the expression «revised and enlarged edition», from the traditional publishing jargon, is presented in this article as a hypotheses to characterize contemporary publishing practices. It consid- ers the publication, in all its stages, as a writing space and as a process that never resigns creativity and criticism.These practices are «revised» (revisited because they imply the problematization of practice, through an exploratory attitude or critic, leading to processes and discourses prepared for a permanent review. And «en- larged» because they expand the operations of each editorial production phase, they iden- tify alternative formats and models, they blur traditional roles (author/editor/designer/ reader and question editing as a mere me- diation for the creation, circulation, reception or reading processes. In this article, we will identify some of the principles and emerging phenomena that help us understand editorial production as an artistic or a literary genre.

  3. Taxonomy of the ant genus Proceratium Roger (Hymenoptera, Formicidae in the Afrotropical region with a revision of the P. arnoldi clade and description of four new species

    Directory of Open Access Journals (Sweden)

    Francisco Hita Garcia

    2014-10-01

    Full Text Available The taxonomy of the genus Proceratium Roger is updated for the Afrotropical region. We give an overview of the genus in the region, provide an illustrated identification key to the three clades (P. arnoldi, P. stictum and P. toschii clades and revise the P. arnoldi clade. Four new species from the P. arnoldi clade are described as new: P. sokoke sp. n. from Kenya, P. carri sp. n. from Mozambique, and P. nilo sp. n. and P. sali sp. n. from Tanzania. In order to integrate the new species into the existing taxonomic system we present an illustrated identification key to distinguish the seven Afrotropical species of the P. arnoldi clade. In addition, we provide accounts for all members of the P. arnoldi clade including detailed descriptions, diagnoses, taxonomic discussions, distribution data and high quality montage images.

  4. Revision of the Madagascan genera Oncodopus Brongniart and Colossopus Saussure (Orthoptera: Tettigoniidae: Conocephalinae; Euconchophorini), with description of Malagasopus gen. nov.

    Science.gov (United States)

    Ünal, Mustafa; Beccaloni, George W

    2017-10-31

    The endemic Madagascan genera Oncodopus Brongniart and Colossopus Saussure are revised using museum specimens, including the types, and recently collected material. A new genus, Malagasopus gen. nov., and seven new species, Malagasopus desutterae sp. nov., Malagasopus meridianus sp. nov., Oncodopus janetae sp. nov., Oncodopus brongniarti sp. nov., Oncodopus saussurei sp. nov., Oncodopus soalalaensis sp. nov. and Colossopus parvicavus sp. nov. are described. Lectotypes are designated for Oncodopus zonatus Brongniart, 1897 and Colossopus redtenbacheri (Brongniart, 1897). A new term, mesothoracic auricle, is proposed for a structure on the episternum of the mesothorax. A tabulated key to the genera and keys to the species are presented. All species are described and diagnosed, and their phylogenetic relationships, geographical distributions, habitat preferences and phenologies are documented. The life history of Colossopus grandidieri is described, and the unusual possible mate-guarding behaviour of several species is discussed. Maps showing the distribution of the species are presented, as too are 57 photographs of museum specimens, 51 drawings of morphological characters, 17 photographs of living specimens and one habitat photograph.

  5. Revision of the Indo-Pacific genus Nembrotha (Nudibranchia: Dorididae: Polyceridae, with a description of two new species

    Directory of Open Access Journals (Sweden)

    Marta Pola

    2008-03-01

    Full Text Available Anatomical examination of new material collected from the Indo-Pacific and the review of several collections from around the world allows for the revision of the genus Nembrotha Bergh, 1877. Two new species, Nembrotha rosannulata n. sp. and Nembrotha aurea n. sp., are described. The oldest available name for the genus is Nembrotha nigerrima Bergh, 1877, which was subsequently designated as the type species by O’Donoghue, 1924. The study of the original type material of N. nigerrima confirmed that it is a senior synonym of another name introduced subsequently, Nembrotha kubaryana Bergh, 1877, the name most commonly used for this species. However, according to the provisions of the International Code of Zoological Nomenclature (Article 23.9.1, there is no reason to invalidate the senior name Nembrotha nigerrima, since it has been used as valid after 1899. Nembrotha cristata Bergh, 1877, N. lineolata Bergh, 1905, N. purpureolineata O’Donoghue, 1924, N. livingstonei Allan, 1933, N. megalocera Yonow, 1990 and N. guttata Yonow, 1993, which are poorly known, are redescribed. Nembrotha rutilans (Pruvot-Fol, 1931 is synonymised with N. purpureolineata. Nembrotha yonowae Goethel and Debelius, 1992 is synonymised with N. guttata. The radulae of Nembrotha milleri Gosliner and Behrens, 1997 and N. mullineri Gosliner and Behrens, 1997 are redescribed.

  6. Computer system design description for SY-101 hydrogen mitigation test project data acquisition and control system (DACS-1). Revision 1

    International Nuclear Information System (INIS)

    Truitt, R.W.

    1994-01-01

    This document provides descriptions of components and tasks that are involved in the computer system for the data acquisition and control of the mitigation tests conducted on waste tank SY-101 at the Hanford Nuclear Reservation. The system was designed and implemented by Los alamos National Laboratory and supplied to Westinghouse Hanford Company. The computers (both personal computers and specialized data-taking computers) and the software programs of the system will hereafter collectively be referred to as the DACS (Data Acquisition and Control System)

  7. Perception and description of premium beers by panels with different degrees of product expertise

    DEFF Research Database (Denmark)

    Giacalone, Davide; Ribeiro, Leticia Machado; Frøst, Michael Bom

    2016-01-01

    The present study compares subjects with varying degrees of product expertise with regards to their ability to provide a sensory profile of beverages. Eight premium beers were evaluated by three different panels using a Napping® test, followed by a descriptive task. Two panels were constituted of...... were all above 0.90, indicating high configurational similarity. In contrast, PLS-DA showed significant differences in the use of attributes, particularly between Experts and Novices, suggesting that product expertise is more associated with descriptive, rather than perceptual, ability....

  8. Revision of the Agrilus adonis species-group (Coleoptera: Buprestidae: Agrilini with description of sixteen new species from southeastern Asia

    Directory of Open Access Journals (Sweden)

    Eduard Jendek

    2015-02-01

    Full Text Available The newly defined Agrilus adonis species-group comprising thirty taxa from Southeast Asia is revised based on the examination of type specimens. The taxonomic concept and distribution of all known taxa is reexamined for the first time since they were described. The complete commented bibliographic data are given for each name. The key to species is provided and complemented with illustration of habitus and genitalia. Images of all primary types are also included. The distribution of selected species is shown on maps. The following sixteen new species are described: Agrilus acrobeles sp. nov.; A. bunsu sp. nov.; A. cechovskyi sp. nov.; A. curiosus sp. nov.; A. garo sp. nov.; A. iban sp. nov.; A. jakli sp. nov.; A. kuchingi sp. nov.; A. lembik sp. nov.; A. meratus sp. nov.; A. orangulu sp. nov.; A. serratus sp. nov.; A. strbai sp. nov.; A. upsilon sp. nov.; A. vir sp. nov. and A. xiphos sp. nov.. The name emeritus Descarpentries & Villiers, 1963 is removed from the synonymy of Agrilus perlisensis Fisher 1936 and revalidated as the name for species A. emeritus Descarpentries & Villiers, 1963. Nine new synonyms are proposed: Agrilus adonis Deyrolle, 1864 (= A. perlisensis Fisher, 1936 syn. nov. = A. testor Kerremnas, 1900 syn. nov.; A. emeritus Descarpentries & Villiers, 1963 (= A. deuvei Baudon, 1965 syn. nov. = A. souvannavongsi Baudon, 1968 syn. nov.; A. famulus Kerremans, 1900 (= A. convergens Fisher, 1930 syn. nov. = A. japanensis Obenberger, 1935 syn. nov.; A. insularis Deyrolle, 1864 (= A. nigrocyaneus Deyrolle, 1864 syn. nov. = A. falsulus Obenberger, 1924 syn. nov.; A. malasicus Fisher, 1930 (=A. bettotanus Fisher, 1930 syn. nov.. Some of those names were already treated as invalid ones but in the synonymy of different species. Their taxonomic history is recognizable from commented references cited at each name.

  9. Descriptions and revised key to the eggcases of the skates (Rajiformes: Rajidae) and catsharks (Carcharhiniformes: Scyliorhinidae) of the British Isles.

    Science.gov (United States)

    Gordon, Cat A; Hood, Ali R; Ellis, Jim R

    2016-08-12

    Updated descriptions and measurements for the eggcases of 10 rajiform and three scyliorhinid species occurring in the shelf seas around the British Isles are given, based on museum material, specimens collected during the 'Great Eggcase Hunt' (a Shark Trust recording project), and specimens obtained from fishery surveys. Quantitative data are given for Amblyraja radiata (n = 94), Dipturus batis (n = 24), D. cf. intermedia (n = 33), Leucoraja naevus (n = 94), Raja brachyura (n = 53), R. clavata (n = 52), R. microocellata (n = 57), R. montagui (n = 52), R. undulata (n = 52), Rostroraja alba (n = 5), Galeus melastomus (n = 7), Scyliorhinus canicula (n = 52) and S. stellaris (n = 58). An updated key for the identification of elasmobranch eggcases is provided, incorporating recent changes in skate taxonomy.

  10. Revision of Gymnotus (Gymnotiformes: Gymnotidae) from the Upper Madeira Basin of Bolivia and Peru, with descriptions of two new species.

    Science.gov (United States)

    Craig, Jack M; Correa-roldÁn, Vanessa; Ortega, HernÁn; Crampton, William G R; Albert, James S

    2018-04-20

    Banded Knifefishes (Gymnotus, Gymnotidae) comprise the most species-rich genus of Neotropical electric fishes, with 41 species currently described from throughout the humid Neotropics, from Mexico to Argentina. Despite substantial alpha-taxonomic work in recent years, the diversity of Gymnotus in some regions remains poorly understood. Here we describe the Gymnotus fauna of the Upper Madeira basin of Bolivia and Peru from examination of more than 240 adult specimens. Species are delimited and described using body proportions (traditional morphometrics), fin-ray, squamation and laterosensory-pore counts (meristics), quantitative shape differences (geometric morphometrics), osteological traits, and color patterns. Comparisons of standardized linear measures as well as multivariate statistical methods validate the presence in the Upper Madeira basin of three previously described species, two with wide-spread geographic distributions throughout Greater Amazonia (G. carapo and G. coropinae), and one (G. chaviro) endemic to southwestern Amazonia. We also diagnose and describe two new species that are endemic to the Upper Madeira basin: G. eyra n. sp., morphologically most similar to G. mamiraua from lowland Amazonia, and G. riberalta n. sp., morphologically most similar to G. pantanal from the Paraguay-Paraná basin. The five Gymnotus species from the Upper Madeira basin are not monophyletic, each species being more closely related to a different species from another region; i.e. the Gymnotus species from the Upper Madeira represents a polyphyletic assemblage. These descriptions to 43 the number of valid Gymnotus species.

  11. Description of the production process - agricultural phase; Descricao do processo produtivo - fase agricola

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2009-10-15

    This chapter presents the description of the state-of-art of the production process of sugar cane bio ethanol in Brazil also denominated of first generation, involving the improvements in the agricultural phase and also the aspects related to the second generation technologies. The different aspects related do the use of sugar cane bagasse and straw cape.

  12. 40 CFR 415.140 - Applicability; description of the sodium bicarbonate production subcategory.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 28 2010-07-01 2010-07-01 true Applicability; description of the sodium bicarbonate production subcategory. 415.140 Section 415.140 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS INORGANIC CHEMICALS MANUFACTURING POINT SOURCE CATEGORY Sodium Bicarbonate...

  13. Description of the production process - industrial phase; Descricao do processo produtivo - fase industrial

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2009-10-15

    This chapter presents the description of the present state-of-art, in this paper called first generation of the productive process of sugar-cane bio ethanol in Brazil, related to the industrial phase involving their improvements and also the aspects related to the second generation technologies, particularly the hydrolysis and gasification of the biomass technologies. The chapter also approaches the aspects referred to the use of sugar cane bagasse and the straw cape, and also the production of electric power surplus.

  14. 77 FR 67395 - Corrosion-Resistant Carbon Steel Flat Products From Germany and Korea; Revised Schedule for the...

    Science.gov (United States)

    2012-11-09

    ... INTERNATIONAL TRADE COMMISSION [Investigation Nos. 701-TA-350 and 731-TA-616 and 618 (Third Review)] Corrosion-Resistant Carbon Steel Flat Products From Germany and Korea; Revised Schedule for the Subject Reviews AGENCY: United States International Trade Commission. ACTION: Notice. DATES: Effective Date...

  15. Taxes for energy products, electricity and CO2. Consequences of the revision of the Energy Taxation Directive for the Netherlands

    International Nuclear Information System (INIS)

    Blom, M.J.; Schroten, A.; Geurts, F.

    2011-07-01

    Taxes on energy products, electricity and CO2 are compared for a number of EU countries (Germany, Belgium, Denmark, United Kingdom, France, Luxembourg, Spain, Sweden and the Netherlands) with special focus on the fiscal, economic and environmental impacts of the revision of the European Energy Directive for the Netherlands. [nl

  16. 78 FR 64008 - Hot-Rolled Steel Products From China, India, Indonesia, Taiwan, Thailand, and Ukraine; Revised...

    Science.gov (United States)

    2013-10-25

    ... INTERNATIONAL TRADE COMMISSION [Investigation Nos. 701-TA-405, 406, and 408 and 731-TA-899-901 and 906-908 (Second Review)] Hot-Rolled Steel Products From China, India, Indonesia, Taiwan, Thailand, and Ukraine; Revised Schedule for the Subject Five Year Reviews AGENCY: United States International Trade...

  17. Taxonomic revision and cladistic analysis of Avicularia Lamarck, 1818 (Araneae, Theraphosidae, Aviculariinae with description of three new aviculariine genera01

    Directory of Open Access Journals (Sweden)

    Caroline Sayuri Fukushima

    2017-03-01

    Full Text Available The genus Avicularia Lamarck, 1818 is revised and all species are rediagnosed. The type species, described as Aranea avicularia Linnaeus, 1758, is the oldest mygalomorph species described and its taxonomic history is extensive and confusing. Cladistic analyses using both equal and implied weights were carried out with a matrix of 46 taxa from seven theraphosid subfamilies, and 71 morphological and ecological characters. The optimal cladogram found with Piwe and concavity = 6 suggests Avicularia and Aviculariinae are monophyletic. Subfamily Aviculariinae includes Avicularia Lamarck, 1818, Typhochlaena C. L. Koch, 1850, Tapinauchenius Ausserer, 1871, Stromatopelma Karsch, 1881, Ephebopus Simon, 1892, Psalmopoeus Pocock, 1895, Heteroscodra Pocock, 1899, Iridopelma Pocock, 1901, Pachistopelma Pocock, 1901, Ybyrapora gen. n., Caribena gen. n., and Antillena gen. n. The clade is supported by well-developed scopulae on tarsi and metatarsi, greatly extended laterally. Avicularia synapomorphies are juveniles bearing black tarsi contrasting with other lighter articles; spermathecae with an accentuated outwards curvature medially, and male palpal bulb with embolus medial portion and tegulum’s margin form an acute angle in retrolateral view. Avicularia is composed of twelve species, including three new species: Avicularia avicularia (Linnaeus, 1818, Avicularia glauca Simon, 1891, Avicularia variegata (F. O. Pickard-Cambridge, 1896 stat. n., A. minatrix Pocock, 1903, Avicularia taunayi (Mello-Leitão, 1920, Avicularia juruensis Mello-Leitão, 1923, Avicularia rufa Schiapelli & Gerschman, 1945, Avicularia purpurea Kirk, 1990, A. hirschii Bullmer et al. 2006, Avicularia merianae sp. n., A. lynnae sp. n., and A. caei sp. n.. Avicularia species are distributed throughout Mexico, Costa Rica, Panama, Trinidad and Tobago, Venezuela, Guyana, Suriname, French Guiana, Colombia, Ecuador, Peru, Bolivia, and Brazil. Three new genera are erected to accommodate former

  18. Taxonomic revision and cladistic analysis of Avicularia Lamarck, 1818 (Araneae, Theraphosidae, Aviculariinae) with description of three new aviculariine genera.

    Science.gov (United States)

    Fukushima, Caroline Sayuri; Bertani, Rogério

    2017-01-01

    The genus Avicularia Lamarck, 1818 is revised and all species are rediagnosed. The type species, described as Aranea avicularia Linnaeus, 1758, is the oldest mygalomorph species described and its taxonomic history is extensive and confusing. Cladistic analyses using both equal and implied weights were carried out with a matrix of 46 taxa from seven theraphosid subfamilies, and 71 morphological and ecological characters. The optimal cladogram found with Piwe and concavity = 6 suggests Avicularia and Aviculariinae are monophyletic. Subfamily Aviculariinae includes Avicularia Lamarck, 1818, Typhochlaena C. L. Koch, 1850, Tapinauchenius Ausserer, 1871, Stromatopelma Karsch, 1881, Ephebopus Simon, 1892, Psalmopoeus Pocock, 1895, Heteroscodra Pocock, 1899, Iridopelma Pocock, 1901, Pachistopelma Pocock, 1901, Ybyrapora gen. n. , Caribena gen. n. , and Antillena gen. n. The clade is supported by well-developed scopulae on tarsi and metatarsi, greatly extended laterally. Avicularia synapomorphies are juveniles bearing black tarsi contrasting with other lighter articles; spermathecae with an accentuated outwards curvature medially, and male palpal bulb with embolus medial portion and tegulum's margin form an acute angle in retrolateral view. Avicularia is composed of twelve species, including three new species: Avicularia avicularia (Linnaeus, 1818), Avicularia glauca Simon, 1891, Avicularia variegata (F. O. Pickard-Cambridge, 1896) stat. n., Avicularia minatrix Pocock, 1903, Avicularia taunayi (Mello-Leitão, 1920), Avicularia juruensis Mello-Leitão, 1923, Avicularia rufa Schiapelli & Gerschman, 1945, Avicularia purpurea Kirk, 1990, Avicularia hirschii Bullmer et al. 2006, Avicularia merianae sp. n. , Avicularia lynnae sp. n. , and Avicularia caei sp. n. . Avicularia species are distributed throughout Mexico, Costa Rica, Panama, Trinidad and Tobago, Venezuela, Guyana, Suriname, French Guiana, Colombia, Ecuador, Peru, Bolivia, and Brazil. Three new genera are erected to

  19. WYE-120318, a ring contraction product of methylnaltrexone, and structure revision of coniothyrione.

    Science.gov (United States)

    Kong, Fangming; Zhu, Tianmin; Pan, Weitao; Tsao, Russ; Pagano, Thomas G; Nguyen, Bao; Marquez, Brian

    2012-12-01

    A contracted ring degradation product, WYE-120318 (compound 2), was discovered during the development phase for methylnaltrexone bromide (compound 1) drug substance. The compound was isolated by high-performance liquid chromatography fractionation, and its structure was determined by spectroscopic data analyses. WYE-120318 is formed from methylnaltrexone through a benzyl-benzilic acid type rearrangement reaction to yield an α-hydroxy-cyclopentanecarboxylic acid substructure. The proposed structure and the formation mechanism are confirmed by the synthesis of WYE-120318 from methylnaltrexone (compound 1). A similar benzyl-benzilic acid type rearrangement reaction can be envisioned as the biological origin of remisporine A (compound 3), a naturally occurring cyclopentadienyl compound that autocatalytically dimerizes to remisporine B (compound 4). The structure of remisporine A was deduced from its dimer 4. Coniothyione (compound 5) can be considered as the first example of a stable natural product bearing the remisporine A skeleton. However, the regiochemistry of the chlorosubstitution in the coniothyrione structure needs to be revised to compound 6 on the basis of the nuclear magnetic resonance data and biogenesis analysis. Copyright © 2012 John Wiley & Sons, Ltd.

  20. A taxonomic revision of the Cymindis (Pinacodera limbata species group (Coleoptera, Carabidae, Lebiini, including description of a new species from Florida, U.S.A.

    Directory of Open Access Journals (Sweden)

    Wesley Hunting

    2013-01-01

    Full Text Available The Cymindis (Pinacodera limbata species group (Coleoptera, Carabidae, Lebiini is a precinctive New World taxon with ranges extended from portions of temperate southeastern Canada and the U.S.A. through the montane regions of Mexico, south to the Isthmus of Tehuantepec. The group is distinguishable from all other members of the subgenus Pinacodera by males possessing a distinctive sclerite (endophallic plate at the apex of the endophallus. In the past, a lack of material and misunderstandings of range of variation within species have contributed to confusion about how many species there really are.This revision of the limbata species group includes a classification, a key to groups within the subgenus Pinacodera and species within the limbata group, descriptions of species, re-rankings and new synonymies. In total 10 taxa are treated, with 6 new synonyms proposed, 1 new combination introduced and 1 new species described: Cymindis (Pinacodera rufostigma (type locality: Archbold Biological Station, Highlands County, Florida, U.S.A.. Each taxon is characterized in terms of structural features of adults, habitat, geographical distribution, and chorological affinities. Available ecological information and treatments of variation are included.

  1. Revision of the characters of Centrolenidae (Amphibia : Anura : Athesphatanura), with comments on its taxonomy and the description of new taxa of glassfrogs

    Science.gov (United States)

    Cisneros-Heredia, D.F.; McDiarmid, Roy W.

    2007-01-01

    Anurans of the family Centrolenidae are a diverse clade of arboreal frogs distributed across tropical America. Knowledge of their taxonomy, systematics, ecology, behavior, morphology, and other evolutionary aspects of their biology is deficient. Relationships among centrolenid species remain largely unresolved, with no satisfactory phylogenetic hypothesis, and none of the current genera has compelling evidence of monophyly. Further, understanding the phylogeny of glassfrogs is constrained by species-level taxonomic problems, including incorrect description of characters, incomplete analyses of intraspecific variation, and lack of appreciation of species diversity. Herein, we define and analyze the 23 characters that are useful, in combination, in diagnosing centrolenid species, and thereby provide a reference for the use of future workers. We propose revised classifications for the parietal and visceral peritoneal pigmentation, liver form and coloration of its associated hepatic peritoneum, nuptial excrescences, and hand ornamentation. We comment on the generic and species-level taxonomy of Centrolenidae, proposing the recognition of a new genus and describing a new species from Ecuador. We treat Hyla ocellifera Boulenger as a synonym of Centrolene prosoblepon (Boettger), Hyalinobatrachium cardiacalyptum McCranie & Wilson as a synonym of Hyalinobatrachium chirripoi (Taylor), and Hyalinobatrachium crybetes McCranie and Wilson as a synonym of Hyalinobatrachium colymbiphyllum (Taylor). We also present an annotated list of the species of glassfrogs from the Republic of Ecuador with some distributional remarks.

  2. Taxonomic revision of the Neotropical pirate spiders of the genus Gelanor Thorell, 1869 (Araneae, Mimetidae) with the description of five new species.

    Science.gov (United States)

    Benavides, Ligia R; Hormiga, Gustavo

    2016-01-12

    We revise the Neotropical spider genus Gelanor Thorell, 1869 (Mimetidae). Gelanor is distributed from northeast Mexico to southern Uruguay , from sea level to 1,600 m. We describe five new species of Gelanor and report eleven new synonymies. Gelanor is here circumscribed to include ten species: Gelanor fortuna new species, Gelanor juruti new species, Gelanor moyobamba new species, Gelanor siquirres new species, Gelanor waorani new species, Gelanor altithorax Keyserling, 1893 (= Gelanor lanei Soares, 1941 new synonymy), Gelanor consequus O. P.-Cambridge, 1902 (= Gelanor depressus Chickering, 1956 new synonymy, Gelanor gertschi Chickering, 1947 new synonymy and Gelanor heraldicus Petrunkevitch, 1925 new synonymy), Gelanor innominatus Chamberlin, 1916, Gelanor latus (Keyserling, 1881) (= Gelanor mixtus O. P.-Cambridge, 1899 new synonymy, Gelanor mabelae Chickering, 1947 new synonymy, Gelanor ornatus Schenkel, 1953 new synonymy and Gelanor proximus Mello-Leitão, 1929 new synonymy) and Gelanor zonatus (C.L. Koch, 1845) (= Gelanor distinctus O-P. Cambridge, 1899 new synonymy, Gelanor insularis Mello-Leitão, 1929 new synonymy and Gelanor obscurus Mello-Leitão, 1929 new synonymy). In addition, we describe for the first time the males of G. altithorax and G. consequus. Species descriptions are provided for all ten species in the genus, together with a compilation of available data, including type specimens, type localities and morphological diagnoses. Light and electron microscope images and updated data on known geographical distributions, are also provided. We also discuss the phylogenetic placement of Gelanor in Mimetidae.

  3. Revised Master Plan for the Hood River Production Program, Technical Report 2008.

    Energy Technology Data Exchange (ETDEWEB)

    Oregon Department of Fish and Wildlife; Confederated Tribes of the Warm Springs Reservation

    2008-04-28

    The Hood River Production Program (HRPP) is a Bonneville Power Administration (BPA) funded program initiated as a mitigation measure for Columbia River hydrosystem effects on anadromous fish. The HRPP began in the early 1990s with the release of spring Chinook and winter steelhead smolts into the basin. Prior to implementation, co-managers, including the Confederated Tribes of the Warm Springs Reservation and the Oregon Department of Fish and Wildlife drafted the Hood River Production Master Plan (O'Toole and ODFW 1991a; O'Toole and ODFW 1991b) and the Pelton Ladder Master Plan (Smith and CTWSR 1991). Both documents were completed in 1991 and subsequently approved by the Council in 1992 and authorized through a BPA-led Environmental Impact Statement in 1996. In 2003, a 10-year programmatic review was conducted for BPA-funded programs in the Hood River (Underwood et al. 2003). The primary objective of the HRPP Review (Review) was to determine if program goals were being met, and if modifications to program activities would be necessary in order to meet or revise program goals. In 2003, an agreement was signed between PacifiCorp and resource managers to remove the Powerdale Dam (RM 10) and associated adult trapping facility by 2010. The HRPP program has been dependant on the adult trap to collect broodstock for the hatchery programs; therefore, upon the dam's removal, some sort of replacement for the trap would be needed to continue the HRPP. At the same time the Hood River Subbasin Plan (Coccoli 2004) was being written and prompted the co-managers to considered future direction of the program. This included revising the numerical adult fish objectives based on the assimilated data and output from several models run on the Hood River system. In response to the Review as well as the Subbasin Plan, and intensive monitoring and evaluation of the current program, the HRPP co-managers determined the spring Chinook program was not achieving the HRPP

  4. Description of the Main Features of the Series Production of the LHC Main Dipole Magnets

    CERN Document Server

    Savary, F; Chevret, P; de Rijk, G; Fessia, P; Liénard, P; Miles, J; Modena, M; Rossi, L; Tommasini, D; Vlogaert, J; Bresson, D; Grunblatt, G; Decoene, JF; Bressani, F; Drago, G; Gagliardi, P; Eysselein, F; Gärtner, W; Lublow, P

    2008-01-01

    The series production of the LHC main dipole magnets was completed in November 2006. This paper presents the organization implemented at CERN and the milestones fixed to fullfil the technical requirements and to respect the master schedule of the machine installation. The CERN organization for the production follow-up, the quality assurance and the magnet testing, as well as the organization of the three main contractors will be described. A description of the design work and procurement of most of the specific heavy tooling and key components will be given with emphasis on the advantages and drawbacks.

  5. General description and production lines of the Egyptian fuel manufacturing pilot plant

    International Nuclear Information System (INIS)

    Zidan, W.I.; Elseaidy, I.M.

    1999-01-01

    The Egyptian Fuel Manufacturing Pilot Plant, FMPP, is a new facility, producing an MTR-type fuel elements required for the Egyptian Second Research Reactor, ETRR-2, as well as other plates or elements for an external clients with the same type and enrichment percent or lower, (LEU). General description is presented. The production lines in FMPP, which begin from uranium hexaflouride (UF 6 , 19.7±0.2 % U 235 by wt), aluminum powder, and nuclear grade 6061 aluminium alloy in sheets, bars, and rods with the different heat treatments and dimensions as a raw materials, are processed through a series of the manufacturing, inspection, and quality control plan to produce the final specified MTR-type fuel elements. All these processes and the product control in each step are presented. The specifications of the final product are presented. (author)

  6. Skin care product evaluation in a group of critically ill, premature neonates: a descriptive study.

    Science.gov (United States)

    Young, Daniel L; Chakravarthy, Debashish; Drower, Edward; Reyna, Roxana

    2014-01-01

    Cleansing, moisturizing, and protecting neonatal skin is important, but literature evaluating specific product lines is limited. The purpose of this study was to measure the influence of a skin care product line on overall skin condition, perineal erythema, and pain when applied to neonates in a neonatal intensive care unit (NICU). This was an open label, descriptive study. Comparisons were made between measurements taken at the beginning of the study to those at the end, on the same subjects. The study was conducted in a 41-bed NICU at Driscoll Children's Hospital in Corpus Christi, Texas, that serves 31 counties in the region. This NICU treats children needing level 2 and 3 care, with a 1:1 or 2:1 nurse staffing ratio. This is not a birthing center; patients come from other community hospitals. Twenty-nine neonates participated in the study; their average body weight was 1.39 kg (3.06 lb) and their average gestation was 31.7 weeks. A skin care product line was introduced into a neonatal intensive care unit for 14 days. The products included 2 cleansers, 2 moisturizers, and a skin protectant with zinc oxide. Three outcome measures were tracked: Neonatal Skin Condition Score (NSCS), Skin Erythema Scale (SES), and pain. Nurses were also given a product evaluation survey. Descriptive statistics were used to report percentages and trends. Paired t tests were used to compare the mean NSCS, SES, and pain scores from the first 2 days a subject was in the study to the mean of the scores from the last 2 days they were in the study. Subjects experienced approximately 1774 exposures to individual products during data collection. No differences were found in pain scores (P = .132), SES score (P = .059), or NSCS (P = .603) when mean values were compared at the beginning and end of the study. Analysis of the product evaluation survey for questions on cleaning, moisturizing, and reducing discomfort found that more than 90% of nurses ranked the new products as better than or

  7. Unified description of quasi-free and resonant processes of hypernuclear production and decay

    International Nuclear Information System (INIS)

    Wuensch, R.

    1992-03-01

    We review a unified description of resonant and quasi-free hypernuclear production reactions on the basis of the continuum shell-model. Both reaction mechanisms are considered as boundary cases of the same process. We apply the model to the (K - , π) and to the (π, K + ) reaction on light target nuclei. Particular attention is given to the consequences of the shallow hyperon-nucleus potential. Hypernuclear disintegration by baryon emission is considered as transition from the bound to the unbound part of the configurational space. (orig.)

  8. A descriptive study of chiropractors' opinions and practices regarding office-based health product sales

    Directory of Open Access Journals (Sweden)

    Page Stacey A

    2012-04-01

    Full Text Available Abstract Background Although the sale of non-prescription health products is ubiquitous, the views of health professionals, such as chiropractors, regarding the sale of such products are not well known. Practitioner opinion is important to understand and inform professional practice. The purpose of this study was to describe chiropractors' perspectives and practices on the sale of health care products from practitioners' offices. Methods Chiropractors were invited to provide written comments about health product sales at the end of a fixed choice, mailed survey. Respondents' comments were analyzed using qualitative description. Ethics approval was received from the Conjoint Health Research Ethics Board at the University of Calgary. Results One hundred seven of the 265 respondents (response rate of 51% provided written comments. Approximately 30 pages of double-spaced, typed text were gathered. Respondents did not consistently endorse or condemn health product sales, and engaged in the practice to greater and lesser extents. While some were opposed to health products sales, some accepted the practice with a degree of ambivalence whereas others clearly embraced it. Some respondents acknowledged a professional conflict of interest in such sales and marketing, and described strategies used to mitigate it. Others provided a range of justifications for the practice. Personal integrity and professional standards were discussed and a need for monitoring identified. Conclusions A wide range of opinions and practices were described and this is consistent with resulting variation in practice. In light of this, standards that facilitate consistency in practice may benefit professionals and the public alike.

  9. A revision of "blanket-hermit crabs" of the genus Paguropsis Henderson, 1888, with the description of a new genus and five new species (Crustacea, Anomura, Diogenidae).

    Science.gov (United States)

    Lemaitre, Rafael; Rahayu, Dwi Listyo; Komai, Tomoyuki

    2018-01-01

    For 130 years the diogenid genus Paguropsis Henderson, 1888 was considered monotypic for an unusual species, P. typica Henderson, 1888, described from the Philippines and seldom reported since. Although scantly studied, this species is known to live in striking symbiosis with a colonial sea anemone that the hermit can stretch back and forth like a blanket over its cephalic shield and part of cephalothoracic appendages, and thus the common name "blanket-crab". During a study of paguroid collections obtained during recent French-sponsored biodiversity campaigns in the Indo-West Pacific, numerous specimens assignable to Paguropsis were encountered. Analysis and comparison with types and other historical specimens deposited in various museums revealed the existence of five undescribed species. Discovery of these new species, together with the observation of anatomical characters previously undocumented or poorly described, including coloration, required a revision of the genus Paguropsis . The name Chlaenopagurus andersoni Alcock & McArdle, 1901, considered by Alcock (1905) a junior synonym of P. typica , proved to be a valid species and is resurrected as P. andersoni (Alcock, 1899). In two of the new species, the shape of the gills, length/width of exopod of maxilliped 3, width and shape of sternite XI (of pereopods 3), and armature of the dactyls and fixed fingers of the chelate pereopods 4, were found to be characters so markedly different from P. typica and other species discovered that a new genus for them, Paguropsina gen. n. , is justified. As result, the genus Paguropsis is found to contain five species: P. typica , P. andersoni , P. confusa sp. n. , P. gigas sp. n. , and P. lacinia sp. n. Herein, Paguropsina gen. n. , is proposed and diagnosed for two new species, P. pistillata gen. et sp. n. , and P. inermis gen. et sp. n. ; Paguropsis is redefined, P. typica and its previously believed junior synonym, P. andersoni , are redescribed. All species are

  10. Hanford Waste Vitrification Plant Quality Assurance Program description for high-level waste form development and qualification. Revision 3, Part 2

    Energy Technology Data Exchange (ETDEWEB)

    1993-08-01

    The Hanford Waste Vitrification Plant Project has been established to convert the high-level radioactive waste associated with nuclear defense production at the Hanford Site into a waste form suitable for disposal in a deep geologic repository. The Hanford Waste Vitrification Plant will mix processed radioactive waste with borosilicate material, then heat the mixture to its melting point (vitrification) to forin a glass-like substance that traps the radionuclides in the glass matrix upon cooling. The Hanford Waste Vitrification Plant Quality Assurance Program has been established to support the mission of the Hanford Waste Vitrification Plant. This Quality Assurance Program Description has been written to document the Hanford Waste Vitrification Plant Quality Assurance Program.

  11. 40 CFR 415.60 - Applicability; description of the chlorine and sodium or potassium hydroxide production subcategory.

    Science.gov (United States)

    2010-07-01

    ... chlorine and sodium or potassium hydroxide production subcategory. 415.60 Section 415.60 Protection of... MANUFACTURING POINT SOURCE CATEGORY Chlor-alkali Subcategory (Chlorine and Sodium or Potassium Hydroxide Production) § 415.60 Applicability; description of the chlorine and sodium or potassium hydroxide production...

  12. Baseline process description for simulating plutonium oxide production for precalc project

    Energy Technology Data Exchange (ETDEWEB)

    Pike, J. A. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2017-10-26

    Savannah River National Laboratory (SRNL) started a multi-year project, the PreCalc Project, to develop a computational simulation of a plutonium oxide (PuO2) production facility with the objective to study the fundamental relationships between morphological and physicochemical properties. This report provides a detailed baseline process description to be used by SRNL personnel and collaborators to facilitate the initial design and construction of the simulation. The PreCalc Project team selected the HB-Line Plutonium Finishing Facility as the basis for a nominal baseline process since the facility is operational and significant model validation data can be obtained. The process boundary as well as process and facility design details necessary for multi-scale, multi-physics models are provided.

  13. Prehospital Blood Product Administration Opportunities in Ground Transport ALS EMS - A Descriptive Study.

    Science.gov (United States)

    Mix, Felicia M; Zielinski, Martin D; Myers, Lucas A; Berns, Kathy S; Luke, Anurahda; Stubbs, James R; Zietlow, Scott P; Jenkins, Donald H; Sztajnkrycer, Matthew D

    2018-06-01

    prehospital blood product administration, opportunities for ground administration appear limited within the described system. MixFM, ZielinskiMD, MyersLA, BernsKS, LukeA, StubbsJR, ZietlowSP, JenkinsDH, SztajnkrycerMD. Prehospital blood product administration opportunities in ground transport ALS EMS - a descriptive study. Prehosp Disaster Med. 2018;33(3):230-236.

  14. When forms meet genes: revision of the scleractinian genera Micromussa and Homophyllia (Lobophylliidae) with a description of two new species and one new genus

    NARCIS (Netherlands)

    Arrigoni, R.; Benzoni Danwei Huang, Hironobu Fukami, Chaolun Allen Chen, Michael L. Berumen, Mia Hoogenboom, Damian P. Thomson, Bert W. Hoeksema, Ann F. Budd, Yuna Zayasu, Tullia I. Terraneo, Yuko F. Kitano, Andrew H. Baird F.; Huang, D.; Fukami, H.; Chen, C.A.; Berumen, M.L.; Hoogenboom, M.; Thomson, D.P.; Hoeksema, B.W.; Budd, A.F.; Zayasu, Y.; Terraneo, T.I.; Kitano, Y.F.; Baird, A.H.

    2016-01-01

    The scleractinian family Lobophylliidae is undergoing a major taxonomic revision thanks to the combination of molecular and morphological data. In this study, we investigate the evolutionary relationships and the macro- and micromorphology of six nominal coral species belonging to two of the nine

  15. New contributions to the knowledge of Chinese flea beetle fauna (III): Revision of Meishania Chen & Wang with description of five new species (Coleoptera: Chrysomelidae: Galerucinae)

    Science.gov (United States)

    The flea beetle genus Meishania Chen & Wang is revised and five new species - M. cangshanensis sp. nov., M. flavipennis sp. nov., M. fulvotigera sp. nov., and M. sichuanica sp. nov. from China and M. bhutanensis sp. nov. from Bhutan - are described. All species of Meishania are illustrated and a key...

  16. 76 FR 22608 - Third Party Testing for Certain Children's Products; Clothing Textiles: Revisions to Terms of...

    Science.gov (United States)

    2011-04-22

    ... Product Certifications Based on Third Party Conformity Assessment Body Testing Prior to Commission's... the product. The Commission also emphasizes that, irrespective of certification, the product in... lifting the stay of enforcement with regard to testing and certification of children's products under 16...

  17. Revision of the species of the genus Cathorops (Siluriformes: Ariidae from Mesoamerica and the Central American Caribbean, with description of three new species

    Directory of Open Access Journals (Sweden)

    Alexandre P. Marceniuk

    Full Text Available The ariid genus Cathorops includes species that occur mainly in estuarine and freshwater habitats of the eastern and western coasts of southern Mexico, Central and South America. The species of Cathorops from the Mesoamerica (Atlantic slope and Caribbean Central America are revised, and three new species are described: C. belizensis from mangrove areas in Belize; C. higuchii from shallow coastal areas and coastal rivers in the Central American Caribbean, from Honduras to Panama; and C. kailolae from río Usumacinta and lago Izabal basins in Mexico and Guatemala. Additionally, C. aguadulce, from the río Papaloapan basin in Mexico, and C. melanopus from the río Motagua basin in Guatemala and Honduras, are redescribed and their geographic distributions are revised.

  18. Revision of EU Ecolabel and EU Green Public Procurement criteria for furniture products: Preliminary Report

    OpenAIRE

    DONATELLO SHANE; MOONS HANS; CORDELLA MAURO; KOWALSKA MALGORZATA AGATA; KAPS RENATA BARBARA; WOLF Oliver; HIDALGO Carme; FUENTES Natalia

    2014-01-01

    The EU is responsible for around 20% of global furniture production and the many "ecolabel schemes" of potential relevance to furniture products have been briefly reviewed. Screening of 109 publications relating to the life cycle impacts of furniture products revealed several general trends, namely that material production and processing where the dominant sources of environmental impacts associated with furniture products. A comprehensive review of the use of hazardous substances and mixture...

  19. 76 FR 36307 - Guidance for Industry on Topical Acne Drug Products for Over-the-Counter Human Use-Revision of...

    Science.gov (United States)

    2011-06-22

    .... FDA-2011-D-0404] Guidance for Industry on Topical Acne Drug Products for Over-the- Counter Human Use... entities entitled ``Topical Acne Drug Products for Over-the-Counter Human Use--Revision of Labeling and... recognized as safe and effective (GRASE) active ingredient in over-the-counter (OTC) topical acne drug...

  20. Influence of the revision of surgical fee schedule on surgeons' productivity in Japan: A cohort analysis of 7602 surgical procedures in 2013-2016.

    Science.gov (United States)

    Nakata, Yoshinori; Watanabe, Yuichi; Narimatsu, Hiroto; Yoshimura, Tatsuya; Otake, Hiroshi; Sawa, Tomohiro

    2018-02-01

    The goal of this study is to evaluate the pure impact of the revision of surgical fee schedule on surgeons' productivity. We collected data from the surgical procedures performed by the surgeons working in Teikyo University Hospital from 1 April through 30 September in 2013-2016. We employed non-radial and non-oriented Malmquist model. We defined the decision-making unit as a surgeon with the highest academic rank in surgery. Inputs were defined as (1) the number of doctors who assisted surgery and (2) the time of surgical operation. The output was defined as the surgical fee for each surgery. We focused on the revisions in 2014 and 2016. We first calculated each surgeon's natural logarithms of the changes in productivity, technique and efficiency in 2013-2014, in 2014-2015 and in 2015-2016. Then, we subtracted the changes in 2014-2015 from the changes in 2013-2014 and in 2015-2016. We analyzed 62 surgeons who performed 7602 surgical procedures. The productivity changes were not significantly different from 0. Their efficiency change was significantly greater than 0, while their technical change was smaller than 0 in revision 2014. Their efficiency change was significantly smaller than 0, while their technical change was greater than 0 in revision 2016 (p increase overall productivity through revision if we could increase both efficiency and technique.

  1. Effective-gluon model description of inclusive meson production in π+- p and pp collisions

    International Nuclear Information System (INIS)

    Look, G.W.; Fischbach, E.

    1977-01-01

    The recently introduced effective-gluon (EG) model is applied to inclusive meson production at large transverse momentum (p/sub t)/from π +- p and pp interactions. In the EG model the dependence of the inclusive differential cross section on p/ sub t/ and center-of-momentum energy √s is characterized by a single universal constant B = 18 GeV 2 ; this constant is obtained by fitting to the inclusive data for pp → cX with c = π +- π 0 , K +- p, and p-bar. Since the EG model requires that the inclusive differential cross sections for π +- p → X/should be characterized by the same constant B, the dependence of these cross sections on p/sub t/and √s should follow from the previous analysis of pp → cX without the introduction of any additional parameters. The only new information required is the form of the momentum distribution function for partons in the incident pion. Several models for this function are considered and it it shown that all of the alternatives lead to approximately the same predictions. Comparison of theory and experiment indicates that the EG model description of the recent Fermilab data of Donaldson et al. is good to approximately 15--20 % per data point over a range of more than 10 5 in the magnitude of the inclusive cross section

  2. An investigation of co-speech gesture production during action description in Parkinson's disease.

    Science.gov (United States)

    Cleary, Rebecca A; Poliakoff, Ellen; Galpin, Adam; Dick, Jeremy P R; Holler, Judith

    2011-12-01

    Parkinson's disease (PD) can impact enormously on speech communication. One aspect of non-verbal behaviour closely tied to speech is co-speech gesture production. In healthy people, co-speech gestures can add significant meaning and emphasis to speech. There is, however, little research into how this important channel of communication is affected in PD. The present study provides a systematic analysis of co-speech gestures which spontaneously accompany the description of actions in a group of PD patients (N = 23, Hoehn and Yahr Stage III or less) and age-matched healthy controls (N = 22). The analysis considers different co-speech gesture types, using established classification schemes from the field of gesture research. The analysis focuses on the rate of these gestures as well as on their qualitative nature. In doing so, the analysis attempts to overcome several methodological shortcomings of research in this area. Contrary to expectation, gesture rate was not significantly affected in our patient group, with relatively mild PD. This indicates that co-speech gestures could compensate for speech problems. However, while gesture rate seems unaffected, the qualitative precision of gestures representing actions was significantly reduced. This study demonstrates the feasibility of carrying out fine-grained, detailed analyses of gestures in PD and offers insights into an as yet neglected facet of communication in patients with PD. Based on the present findings, an important next step is the closer investigation of the qualitative changes in gesture (including different communicative situations) and an analysis of the heterogeneity in co-speech gesture production in PD. Copyright © 2011 Elsevier Ltd. All rights reserved.

  3. 75 FR 78755 - Notice of Initial Determination Revising the List of Products Requiring Federal Contractor...

    Science.gov (United States)

    2010-12-16

    ... Products Requiring Federal Contractor Certification as to Forced/Indentured Child Labor Pursuant to... products requiring federal contractor certification as to the use of forced or indentured child labor. To.... 13126 (``Prohibition of Acquisition of Products Produced by Forced or Indentured Child Labor''), in...

  4. 77 FR 20051 - Notice of Final Determination Revising the List of Products Requiring Federal Contractor...

    Science.gov (United States)

    2012-04-03

    ... Products Requiring Federal Contractor Certification as to Forced or Indentured Child Labor Pursuant to... ``Procedural Guidelines for the Maintenance of the List of Products Requiring Federal Contractor Certification... List of Products Requiring Federal Contractor Certification as to Forced or Indentured Child Labor...

  5. 76 FR 31365 - Notice of Final Determination Revising the List of Products Requiring Federal Contractor...

    Science.gov (United States)

    2011-05-31

    ... List of Products Requiring Federal Contractor Certification as to Forced or Indentured Child Labor... Contractor Certification as to Forced or Indentured Child Labor.'' This notice adds a product, hand-woven... of the List of Products Requiring Federal Contractor Certification as to Forced or Indentured Child...

  6. Multiparticle model for the description of the neutron-production in the plasma focus

    International Nuclear Information System (INIS)

    Ruhs, N.

    Following a comparison of the various numerical methods the experimental set-up is described. This is followed by a brief description of the MHD computation on which the particle computation is to be based. A description is given of the methods applied for the particle computation

  7. Revision of Chone Krøyer, 1856 (Polychaeta: Sabellidae from the eastern central Atlantic and Mediterranean Sea with descriptions of two new species

    Directory of Open Access Journals (Sweden)

    María Ana Tovar-Hernández

    2007-06-01

    Full Text Available A neotype specimen is designated for Chone acustica (Claparède, 1870 with a full description. The original descriptions of Chone arenicola Langerhans, 1880 and Chone collaris Langerhans, 1880, both from Madeira, did not include some details and incomplete or misleading information was provided, so both species are redescribed. Amendments to the description of Chone longiseta Giangrande, 1992 are also given together with the methyl green staining pattern of Chone usticensis Giangrande et al. 2006. Two new species are described: Chone gambiae sp. nov., from the Gulf of Naples and Chone dunerificta sp. nov., from the Gulf of Salerno. This study shows the distribution of Chone duneri Krøyer, 1856, and Chone filicaudata Southern, 1914, to be restricted to the Arctic seas and North Atlantic Ocean, respectively. Records from the Mediterranean Sea are found to be erroneous.

  8. Revision of the West Palaearctic Polistes Latreille, with the descriptions of two species – an integrative approach using morphology and DNA barcodes (Hymenoptera, Vespidae

    Directory of Open Access Journals (Sweden)

    Christian Schmid-Egger

    2017-11-01

    Full Text Available The genus Polistes is revised for the West Palaearctic region based on morphology and DNA barcodes. The revision includes all known West Palaearctic species, raising the number of species in Europe to 14 and to 17 for the West Palaearctic realm. DNA barcodes were recovered from 15 species, 14 of which belong to the subgenus Polistes, and one, P. wattii, to the subgenus Gyrostoma. An integrative taxonomic approach combining morphology and molecular data (DNA barcoding was employed to resolve longstanding taxonomic problems in this group. Two species, P. austroccidentalis van Achterberg & Neumeyer, sp. n. (= P. semenowi auctt. from W and SW Europe and P. maroccanus Schmid-Egger, sp. n. from Morocco are described as new. Polistes bucharensis Erichson, 1849, and P. foederatus Kohl, 1898, were restored from synonymy. The following new synonyms are proposed: P. sulcifer Zimmermann, 1930, and Pseudopolistes sulcifer var. similator Zirngiebl, 1955, under P. semenowi Morawitz, 1889, syn. n.; Polistes iranus Guiglia, 1976, Polistes gallica var. ornata Weyrauch, 1938 and Polistes gallicus muchei Gusenleitner, 1976, under P. bucharensis Erichson, 1849, syn. n.; Polistes omissus var. ordubadensis Zirngiebl, 1955, and P. hellenicus Arens, 2011, under Polistes mongolicus du Buysson, 1911, syn. n. An illustrated key includes all species and additionally three species from the subgenera Aphanilopterus Meunier, 1888 and Gyrostoma Kirby, 1828 (including a Nearctic species recently introduced to Spain and two species occurring in Egypt, the Arabian Peninsula, and SW Asia. A phylogenetic analysis using Bayesian inference provides insights into phylogenetic relationships within the genus Polistes.

  9. 76 FR 35672 - Revised Effectiveness Determination; Sunscreen Drug Products for Over-the-Counter Human Use

    Science.gov (United States)

    2011-06-17

    ... who require such products based upon personal knowledge, planned sun exposure, geographical location... identify the appropriate target population (e.g., high altitude skiers or people diagnosed with skin cancer...

  10. A Revised Production Model of Learner-Generated Comic: Validation through Expert Review

    OpenAIRE

    Azman Farah Nadia; Zaibon Syamsul Bahrin; Shiratuddin Norshuhada

    2018-01-01

    Recent advancement of authoring tools has fostered a widespread interest towards using comics as a Digital Storytelling medium. This technology integrated learning approach is known as learner-generated comic production; where learners constructively produce digital stories in a form of educational comics. However, there were concerns towards the obstacles and challenges of producing learner-generated comics. Hence, a conceptual production model of learner-generated comic was proposed to guid...

  11. Optimal Pricing and Advertising Policies for New Product Oligopoly Models. Revision.

    Science.gov (United States)

    1981-08-01

    advertising is the most important strategic -element in determining the market share achieved by a firm. For most consumer products during their...products which can be made more efficiently or which have higher consumer appeal can support a higher level of advertising ; this is an intuitively...extended in several different ways. For in- stance, we may assume that the number of potential custom ,-rs is dependent on both advertising and price

  12. Functional Communication Profile - Revised: uma proposta de caracterização objetiva de crianças e adolescentes do espectro do autismo Functional Communication Profile - Revised: objective description of children and adolescents of the autism spectrum

    Directory of Open Access Journals (Sweden)

    Thaís Helena Ferreira Santos

    2012-12-01

    Full Text Available OBJETIVO: Caracterizar objetivamente as alterações de crianças e adolescentes incluídos no espectro do autismo de acordo com o grau de severidade definido a partir das respostas ao Functional Communication Profile - Revised (FCP-R. MÉTODOS: Foram selecionadas 50 crianças (idade média 7 anos e 11 meses com diagnósticos no espectro do autismo que foram avaliados segundo os critérios do FCP-R. As respostas obtidas foram pontuadas e classificadas de acordo com a severidade e realizada análise estatística pertinente. RESULTADOS: A caracterização dessa população evidenciou dados concordantes com a literatura, mostrando prejuízos nas áreas de linguagem (expressiva e receptiva, comportamento e pragmática, principalmente. Os indivíduos que não possuem habilidades verbais evidenciaram, ainda, alterações referentes aos domínios fala e fluência. CONCLUSÃO: O FCP-R foi sensível para caracterizar a população estudada, mostrando-se ainda mais eficaz para a avaliação individualizada.PURPOSE: To objectively characterize the alterations of autistic children and adolescents as to their severity degree, according to the answers to the Functional Communication Profile - Revised (FCP-R. METHODS: Subjects were 50 children (mean age 7 years 11 months with diagnosis within the autism spectrum that were assessed according to the FCP-R criteria. Answers were scored and classified according to severity, and the results were statistically analyzed. RESULTS: This group characterization evidenced results that agree with the literature, showing disorders mainly in the areas of language (expressive and receptive, behavior and pragmatics. Individuals without verbal communication also showed speech and fluency disorders. CONCLUSION: The FCP-R was sensitive to characterize the studied population, and even more efficient for individual assessment.

  13. A taxonomic revision of the kalshoveni species-group of the genus Nemophora Hoffmannsegg (Lepidoptera, Adelidae), with descriptions of six new species from Indonesia and Papua New Guinea.

    Science.gov (United States)

    Kozlov, Mikhail V

    2016-11-10

    A monophyletic group of seven externally similar, grey to light brown species of the genus Nemophora Hoffmannsegg from the islands of Indonesia and Papua New Guinea, recognised as the new kalshoveni species-group, is revised. All species of this group possess an oblique light stripe, which arises from the costal margin of the forewing at 0.7-0.8 of its length towards the middle of an external wing margin. The proboscis of these species is unusually thick due to a dense cover of raised dark brown and black scales. A key to the species based on external characters and on male genitalia is provided; new species are described from the Sangir (N. humerella sp. nov.) and New Guinea (N. agassizi sp. nov., N. bistrigata sp. nov., N. dohertyi sp. nov., N. toxopeusi sp. nov. and N. stenopterella sp. nov.).

  14. A revision of distribution and the ecological description of Orobanche picridis (Orobanchaceae at the NE limit of its geographical range from Poland and Ukraine

    Directory of Open Access Journals (Sweden)

    Renata Piwowarczyk

    2012-12-01

    Full Text Available The paper presents the current distribution of Orobanche picridis in Poland and Ukraine, within the Polish borders in the interwar period, based on a critical revision of herbarium and literature data as well as the results of my field studies. The largest number of its localities is in S and SE Poland in the Wyżyna Śląsko-Krakowska, Wyżyna Małopolska, Wyżyna Lubelska uplands, Middle Roztocze, Small Polesie, the Pogórze Przemyskie foreland and in the former Tarnopol province (W Ukraine. These are the north-easternmost sites known for the species and extend its limit range. A map of its distribution in Poland and Ukraine is included. The taxonomy, biology, and ecology of O. picridis are also discussed.

  15. Revision of Bondariella Hustache & Bondar (Coleoptera: Curculionidae), with descriptions of the first species from the Amazon and notes on natural history.

    Science.gov (United States)

    Valente, Roberta De Melo; Cordeiro Júnior, Mariano Brandão

    2015-09-15

    Bondariella Hustache & Bondar, 1942 is revised. In addition to the redescription of the genus and its four previously known species, we report and describe the first species from the Amazonian region: Bondariella rudicula sp. nov. and Bondariella crenata sp. nov. We also provide a key to the species, illustrations and notes on natural history. All six species of Bondariella have been collected on palm flowers from Brazil, with the previously known species having only been recorded from species of Syagrus Mart. from the Atlantic Forest and Caatinga biomes. The two new species have only been recorded from species of Euterpe Mart. from the Amazon biome. Future work may prove if the associations with Syagrus and Euterpe are specific to the biomes.

  16. Exposure to revised drinking guidelines and 'COM-B' determinants of behaviour change: descriptive analysis of a monthly cross-sectional survey in England.

    Science.gov (United States)

    Stevely, Abigail K; Buykx, Penny; Brown, Jamie; Beard, Emma; Michie, Susan; Meier, Petra S; Holmes, John

    2018-02-14

    January 2016 saw the publication of proposed revisions to the UK's lower risk drinking guidelines but no sustained promotional activity. This paper aims to explore the impact of publishing guidelines without sustained promotional activity on reported guideline exposure and determinants of behaviour (capability, opportunity and motivation) proposed by the COM-B model. Data were collected by a monthly repeat cross-sectional survey of adults (18+) resident in England over 15 months between November 2015 and January 2017 from a total of 16,779 drinkers, as part of the Alcohol Toolkit Study. Trends and associated 95% confidence intervals were described in the proportion of reported exposure to guidelines in the past month and measures of the capability, opportunity and motivation to consume alcohol within drinking guidelines. There was a rise in reported exposure to drinking guidelines in January 2016 (57.6-80.6%) which did not reoccur in January 2017. Following the increase in January 2016, reported exposure reduced slowly but remained significantly higher than in December 2015. In February 2016, there was an increase in measures of capability (31.1% reported tracking units of alcohol consumption and 87.8% considered it easier to drink safely) and opportunity (84.0% perceived their lifestyle as conducive to drinking within guidelines). This change was not maintained in subsequent months. Other measures showed marginal changes between January and February 2016 with no evidence of change in subsequent months. Following the publication of revised drinking guideline in January 2016, there was a transient increase in exposure to guidelines, and capability and opportunity to drink within the guidelines that diminished over time. The transience and size of the changes indicate that behaviour change is unlikely. Well-designed, theory-based promotional campaigns may be required for drinking guidelines to be an effective public health intervention.

  17. Integrated Project Management System description

    International Nuclear Information System (INIS)

    1994-09-01

    The Integrated Program Management System (IPMS) Description is a ''working'' document that describes the work processes of the Uranium Mill Tailings Remedial Action Project Office (UMTRA) and IPMS Group. This document has undergone many revisions since the UMTRA Project began; this revision not only updates the work processes but more clearly explains the relationships between the Project Office, contractors, and other participants. The work process flow style has been revised to better describe Project work and the relationships of participants. For each work process, more background and guidance on ''why'' and ''what is expected'' is given. For example, a description of activity data sheets has been added in the work organization and the Project performance and reporting processes, as well as additional detail about the federal budget process and funding management and improved flow charts and explanations of cost and schedule management. A chapter has been added describing the Cost Reduction/Productivity Improvement Program. The Change Control Board (CCB) procedures (Appendix A) have been updated. Project critical issues meeting (PCIM) procedures have been added as Appendix B. Budget risk assessment meeting procedures have been added as Appendix C. These appendices are written to act as stand-alone documentation for each process. As the procedures are improved and updated, the documentation can be updated separately

  18. Taxonomic revision of Plyomydas Wilcox & Papavero, 1971 with the description of two new species and its transfer to Mydinae (Insecta: Diptera: Mydidae

    Directory of Open Access Journals (Sweden)

    Stephanie Castillo

    Full Text Available ABSTRACT The monotypic Neotropical Mydidae genus Plyomydas Wilcox & Papavero, 1971, to date confined to coastal Peru, is reviewed. Two new species, Plyomydas adelphe sp. nov. and Plyomydas phalaros sp. nov., are described from mid-elevational western Argentina, which extends the distribution of the genus considerably. Distribution, occurrence in biodiversity hotspots sensu Conservation International, and seasonal incidence are discussed. Descriptions/re-descriptions, photographs, illustrations, and identification keys are provided and made openly accessible in data depositories to support future studies of the included taxa. Plyomydas is transferred from the Leptomydinae to the Mydinae: Messiasiini based on the absence of acanthophorite spines on abdominal tergite 10 in females and the presence of vein M3 + M4 terminating in the costal vein C. Leptomydinae is therefore restricted to the Northern Hemisphere with the exception of Hessemydas Kondratieff, Carr & Irwin, 2005 known from Madagascar. Messiasia notospila (Wiedemann, 1828 is compared to Plyomydas species.

  19. A new species of Tereancistrum (Monogenea, Dactylogyridae) from the gills of three Leporinus species (Characiformes, Anostomidae) and a revised description of Tereancistrum parvus.

    Science.gov (United States)

    Zago, Aline C; Yamada, Fábio H; Franceschini, Lidiane; Bongiovani, Marcela F; Yamada, Priscilla O F; Silva, Reinaldo J DA

    2017-01-01

    The present study describes Tereancistrum flabellum n. sp. (Dactylogyridae, Ancyrocephalinae) from the gills of the anostomid fishes Leporinus friderici, Leporinus amblyrhynchus and Leporinus elongatus from two freshwater ecosystems in the south east of Brazil. This new species is mainly characterized by the morphology of the copulatory complex (such as the MCO base formed by two fan-shaped structures, and accessory piece flattened, curved, rigid and channeled), a dorsal anchor with a well-developed superficial and inconspicuous deep root, and the shape of the accessory anchor sclerite with small spathulate termination. Tereancistrum flabellum n. sp. is the first record of a dactylogyrid from L. amblyrhynchus. The description of Tereancistrum parvus is also emended to correct and complement previous descriptions and the species is reported for the first time in Schizodon nasutus.

  20. Manufacturing history of etanercept (Enbrel®): Consistency of product quality through major process revisions.

    Science.gov (United States)

    Hassett, Brian; Singh, Ena; Mahgoub, Ehab; O'Brien, Julie; Vicik, Steven M; Fitzpatrick, Brian

    2018-01-01

    Etanercept (ETN) (Enbrel®) is a soluble protein that binds to, and specifically inhibits, tumor necrosis factor (TNF), a proinflammatory cytokine. ETN is synthesized in Chinese hamster ovary cells by recombinant DNA technology as a fusion protein, with a fully human TNFRII ectodomain linked to the Fc portion of human IgG1. Successful manufacture of biologics, such as ETN, requires sophisticated process and product understanding, as well as meticulous control of operations to maintain product consistency. The objective of this evaluation was to show that the product profile of ETN drug substance (DS) has been consistent over the course of production. Multiple orthogonal biochemical analyses, which included evaluation of attributes indicative of product purity, potency, and quality, were assessed on >2,000 batches of ETN from three sites of DS manufacture, during the period 1998-2015. Based on the key quality attributes of product purity (assessed by hydrophobic interaction chromatography HPLC), binding activity (to TNF by ELISA), potency (inhibition of TNF-induced apoptosis by cell-based bioassay) and quality (N-linked oligosaccharide map), we show that the integrity of ETN DS has remained consistent over time. This consistency was maintained through three major enhancements to the initial process of manufacturing that were supported by detailed comparability assessments, and approved by the European Medicines Agency. Examination of results for all major quality attributes for ETN DS indicates a highly consistent process for over 18 years and throughout changes to the manufacturing process, without affecting safety and efficacy, as demonstrated across a wide range of clinical trials of ETN in multiple inflammatory diseases.

  1. Energy efficiency improvement target for SIC 34 - fabricated metal products. Revised target support document

    Energy Technology Data Exchange (ETDEWEB)

    Byrer, T. G.; Billhardt, C. F.; Farkas, M. S.

    1977-02-15

    In accordance with section 374 of the Energy Policy and Conservation Act (EPCA), Pub. L. 94-163, the Federal Energy Administration (FEA) proposed industrial energy efficiency improvement targets for the ten most energy-consumptive manufacturing industries in the U.S. Following public hearings and a review of the comments made, the final targets for Fabricated Metal Products (SIC 34) were established and are described. Using 1972 data on the energy consumed to produce specific metal products, it was concluded that a 24% reduction in energy consumption for SIC 34 is a viable goal for achievement by 1980. (ERA citation 04:045006)

  2. The Technique of the Sound Studio: Radio, Record Production, Television, and Film. Revised Edition.

    Science.gov (United States)

    Nisbett, Alec

    Detailed explanations of the studio techniques used in radio, record, television, and film sound production are presented in as non-technical language as possible. An introductory chapter discusses the physics and physiology of sound. Subsequent chapters detail standards for sound control in the studio; explain the planning and routine of a sound…

  3. PHARMACEUTICAL QUALITY OF GENERIC ATORVASTATIN PRODUCTS COMPARED WITH THE INNOVATOR PRODUCT: A NEED FOR REVISING PRICING POLICY IN PALESTINE.

    Science.gov (United States)

    Shawahna, Ramzi; Hroub, Abdel Kareem; Abed, Eliama; Jibali, Sondos; Al-Saghir, Ruba; Zaid, Abdel Naser

    2016-01-01

    Atorvastatin reduces morbidity and mortality due to cardiovascular events. This study was conducted to assess the prices and pharmaceutical quality of innovator atorvastatin 20 mg with its locally available generics in Palestine and to assess the suitability of their interchangeability. The prices of innovator and generic atorvastatin 20 mg were determined and compared. Innovator atorvastatin and four generic products were tested for their pharmaceutical quality. Tablets were tested for their drug contents, weight uniformity, hardness, disintegration and dissolution. Three out of four generics were less expensive than the innovator. Pharmaceutical quality assessments were satisfactory and within limits for all atorvastatin tested products. The average weight ranged from 206.6 ± 8.40 to 330 ± 3.92 mg and the %RSDs were within the permitted limits as per USP. Tablet hardness ranged from 102 ± 1.41 to 197.4 ± 6.88 kg and drug contents ranged from 92.2% to 105.3%. All products disintegrated within permitted time limits and showed very rapid dissolution. Products released more than 85% of their drug contents in less than 15 min. Our results showed that all tested innovator and generic atorvastatin products were of good pharmaceutical quality. Despite the lack of in vivo evaluation, our results indicate that these products are equivalent in vitro. Considering the in vitro release characteristics, these products might be used interchangeably. However, regulatory authorities permit the use of in vitro data in establishing similarity between immediate release oral dosage forms containing biopharmaceutical classification system class I and III drugs only.

  4. Use of basic and specific pre-treatments for the biogas production. Revision and analysis

    International Nuclear Information System (INIS)

    Martínez Hernández, Carlos M.; García López, Yaser

    2016-01-01

    Keeping in mind the importance that has today the use of national and international biogas plants, which use as raw material animal manure; as well as agricultural and agroindustrial residuals for the energy production and biofertilizers, minimizing the aspects of environmental contamination. This work is presented in three parts, in those which: firstly the technologies and the methods are described to apply the basic and special pre-treatments to the different biomass in order to obtain their maximum potential of methane. A second part where it is approached the particularities to do that. Finally, a third part where their possible use is analyzed in the Cuban case. As a result of the same one, the state of the art is shown in the use of basic and special pre-treatments, with the objective of to potentialize the increase of the methane production in agricultural or animal biomasses. (author)

  5. Collisional pumping for the production of intense spin-polarized neutral beams: target considerations. Revision

    International Nuclear Information System (INIS)

    Stearns, J.W.; Burrell, C.F.; Kaplan, S.N.; Pyle, R.V.; Ruby, L.; Schlachter, A.S.

    1985-04-01

    Polarized beams at intensity levels heretofore not considered feasible have recently been proposed for heating and fueling fusion plasmas. Polarized-beam fueling could increase fusion rates by 50% as well as allow control of the directionality of the fusion products. A process which we have recently described, and called collisional pumping, promises to produce beams of polarized ions vastly more intense than producible by current methods

  6. Nuclear waste glass product consistency test (PCT): Version 7.0. Revision 3

    International Nuclear Information System (INIS)

    Jantzen, C.M.; Bibler, N.E.; Beam, D.C.; Ramsey, W.G.

    1994-06-01

    Liquid high-level nuclear waste will be immobilized at the Savannah River Site (SRS) by vitrification in borosilicate glass. The glass will be produced in the Defense Waste Processing Facility (DWPF), poured into stainless steel canisters, and eventually disposed of in a geologic repository. In order to comply with the Waste Acceptance Product Specifications (WAPS), the durability of the glass needs to be measured during production to assure its long term stability and radionuclide release properties. A durability test, designated the Product Consistency Test (PCT), was developed for DWPF glass in order to meet the WAPS requirements. The response of the PCT procedure was based on extensive testing with glasses of widely different compositions. The PCT was determined to be very reproducible, to yield reliable results rapidly, and to be easily performed in shielded cell facilities with radioactive samples. Version 7.0 of the PCT procedure is attached. This draft version has been submitted to ASTM for full committee (C26, Nuclear Fuel Cycle) ballot after being balloted successfully through subcommittee C26.13 on Repository Waste Package Materials Testing

  7. Integrative revision of the giant pill-millipede genus Sphaeromimus from Madagascar, with the description of seven new species (Diplopoda, Sphaerotheriida, Arthrosphaeridae)

    Science.gov (United States)

    Wesener, Thomas; Le, Daniel Minh-Tu; Loria, Stephanie F.

    2014-01-01

    Abstract The Malagasy giant pill-millipede genus Sphaeromimus de Saussure & Zehntner, 1902 is revised. Seven new species, S. titanus sp. n., S. vatovavy sp. n., S. lavasoa sp. n., S. andohahela sp. n., S. ivohibe sp. n., S. saintelucei sp. n., and S. andrahomana sp. n. were discovered, in one case with the help of sequence data, in the rainforests of southeastern Madagascar. The species are described using light- and scanning electron microscopy. A key to all 10 species of the genus is presented. All but one (S. andohahela) of the newly discovered species are microendemics each occurring in isolated forest fragments. The mitochondrial COI barcoding gene was amplified and sequenced for 18 Sphaeromimus specimens, and a dataset containing COI sequences of 28 specimens representing all Sphaeromimus species (except S. vatovavy) was analyzed. All species are genetically monophyletic. Interspecific uncorrected genetic distances were moderate (4–10%) to high (18–25%), whereas intraspecific variation is low (0–3.5%). Sequence data allowed the correct identification of three colour morphs of S. musicus, as well as the identity of a cave specimen, which although aberrant in its morphology and colouration, was genetically identical to the holotype of S. andrahoma. PMID:25009417

  8. Taxonomic revision and phylogenetic relationships of Dasyloricaria Isbrücker & Nijssen, 1979 (Siluriformes: Loricariidae, with description of a new species

    Directory of Open Access Journals (Sweden)

    Alejandro Londoño-Burbano

    Full Text Available ABSTRACT A taxonomic revision and phylogenetic analysis were completed for Dasyloricaria . The genus includes three valid species: D . filamentosa and D . latiura previously included in the genus, and a new species described herein. Dasyloricaria have a restricted trans-Andean distribution, with D . filamentosa occurring at the lower and middle Magdalena, lower Cauca, and Sinu in Colombia, and lago Maracaibo basin in Colombia and Venezuela; D . latiura in the Atrato and the Tuyra basins in Colombia and Panama, respectively; and the new species in the upper and middle Magdalena basin in Colombia. New synonyms for D . filamentosa and D . latiura are proposed, and a lectotype is designated for the latter. Dasyloricaria is herein recognized as monophyletic, with D . filamentosa as the sister group of D . latiura , and the new speciesas sister to that clade. Spatuloricaria is hypothesized to be the sister group of Dasyloricaria based on synapomorphies of the neurocranium, branchial arches and external morphology features. The subtribe Rineloricariina was partially corroborated through the phylogenetic analysis. An identification key for the species of Dasyloricaria is provided.

  9. Revision of the genus-group Hystricella R. T. Lowe, 1855 from Porto Santo (Madeira Archipelago), with descriptions of new recent and fossil taxa (Gastropoda, Helicoidea, Geomitridae).

    Science.gov (United States)

    Mattia, Willy De; Neiber, Marco T; Groh, Klaus

    2018-01-01

    The genus-group Hystricella R. T. Lowe, 1855 is revised on the basis of conchological, anatomical and genetic characteristics. A new genus Wollastonia gen. n. , two recent species, W. jessicae sp. n. and W. klausgrohi sp. n ., and one recent subspecies, W. jessicae monticola ssp. n. are described as new to science, as well as five fossil taxa, H. microcarinata sp. n. , W. beckmanni sp. n. , W. falknerorum sp. n. , W. ripkeni sp. n. , and W. inexpectata sp. n. For Helix vermetiformis R. T. Lowe, 1855, H. leacockiana Wollaston, 1878, H. oxytropis R. T. Lowe, 1831, H. duplicata R. T. Lowe, 1831 and H. oxytropis var. ß subcarinulata Wollaston, 1878 lectotypes are designated. For the taxa Helix bicarinata G. B. Sowerby I, 1824, Helix bicarinata var. ß aucta Wollaston, 1878 and Discula bulverii W. Wood, 1828 neotypes are selected. The taxa aucta and subcarinulata are elevated to specific rank. For the hitherto monospecific (sub-) genus Callina R. T. Lowe, 1855 it is shown that it is not closely related to the genus Discula but to the Hystricella -group and its generic rank is confirmed. The taxon D. bulverii W. Wood, 1828 is transferred from the genus Discula s. str. to the genus Callina . A further fossil taxon C. waldeni sp. n. is described as new to science.

  10. Revision of Australian Matini diving beetles based on morphological and molecular data (Coleoptera, Dytiscidae, Matinae, with description of a new species

    Directory of Open Access Journals (Sweden)

    Lars Hendrich

    2013-04-01

    Full Text Available Morphological characters and mitochondrial DNA sequence data were used to revise the Australian diving beetles in the genera Allomatus Mouchamps, 1964 and Batrachomatus Clark, 1863. As a result of these studies Allomatus syn. n. is synonymised with Batrachomatus, and Allomatus nannup Watts, 1978 from SW Australia and A. wilsoni Mouchamps, 1964 from SE Victoria are transferred to Batrachomatus. The four Australian Matini species known so far are re-described, and B. larsoni sp. n. from the Windsor Tableland in NE Queensland is described. After more than 40 years B. wilsoni has been re-discovered in two rivers in Victoria. We delineate the species using traditionally employed morphological structures such as in the male genitalia and body size, shape and colour pattern, as well as mitochondrial cox1 sequence data for 20 individuals. Important species characters (median lobes, parameres and colour patterns were illustrated. We provide an identification key and outline distribution and habitat preferences of each species. All Australian Matini are lotic, inhabiting permanent and intermittent streams, creeks and rivers.

  11. Mangrove production and carbon sinks: A revision of global budget estimates

    Science.gov (United States)

    Bouillon, S.; Borges, A.V.; Castaneda-Moya, E.; Diele, K.; Dittmar, T.; Duke, N.C.; Kristensen, E.; Lee, S.-Y.; Marchand, C.; Middelburg, J.J.; Rivera-Monroy, V. H.; Smith, T. J.; Twilley, R.R.

    2008-01-01

    Mangrove forests are highly productive but globally threatened coastal ecosystems, whose role in the carbon budget of the coastal zone has long been debated. Here we provide a comprehensive synthesis of the available data on carbon fluxes in mangrove ecosystems. A reassessment of global mangrove primary production from the literature results in a conservative estimate of ???-218 ?? 72 Tg C a-1. When using the best available estimates of various carbon sinks (organic carbon export, sediment burial, and mineralization), it appears that >50% of the carbon fixed by mangrove vegetation is unaccounted for. This unaccounted carbon sink is conservatively estimated at ??? 112 ?? 85 Tg C a-1, equivalent in magnitude to ??? 30-40% of the global riverine organic carbon input to the coastal zone. Our analysis suggests that mineralization is severely underestimated, and that the majority of carbon export from mangroves to adjacent waters occurs as dissolved inorganic carbon (DIC). CO2 efflux from sediments and creek waters and tidal export of DIC appear to be the major sinks. These processes are quantitatively comparable in magnitude to the unaccounted carbon sink in current budgets, but are not yet adequately constrained with the limited published data available so far. Copyright 2008 by the American Geophysical Union.

  12. Feed Materials Production Center waste management plan (Revision to NLCO-1100, R.6)

    International Nuclear Information System (INIS)

    Watts, R.E.; Allen, T.; Castle, S.A.; Hopper, J.P.; Oelrich, R.L.

    1986-01-01

    In the process of producing uranium metal products used in Department of Energy (DOE) defense programs at other DOE facilities, various types of wastes are generated at the Feed Materials Production Center (FMPC). Process wastes, both generated and stored, are discussed in the Waste Management Plan and include low-level radioactive waste (LLW), mixed hazardous/radioactive waste, and sanitary/industrial waste. Scrap metal waste and wastes requiring special remediation are also addressed in the Plan. The Waste Management Plan identifies the comprehensive programs developed to address safe storage and disposition of all wastes from past, present, and future operations at the FMPC. Waste streams discussed in this Plan are representative of the wastes generated and waste types that concern worker and public health and safety. Budgets and schedules for implementation of waste disposition are also addressed. The waste streams receiving the largest amount of funding include LLW approved for shipment by DOE/ORO to the Nevada Test Site (NTS) (MgF 2 , slag leach filter cake, and neutralized raffinate); remedial action wastes (waste pits, K-65 silo waste); thorium; scrap metal (contaminated and noncontaminated ferrous and copper scrap); construction rubble and soil generated from decontamination and decommissioning of outdated facilities; and low-level wastes that will be handled through the Low-Level Waste Processing and Shipping System (LLWPSS). Waste Management milestones are also provided. The Waste Management Plan is divided into eight major sections: Introduction; Site Waste and Waste Generating Process; Strategy; Projects and Operations; Waste Stream Budgets; Milestones; Quality Assurance for Waste Management; and Environmental Monitoring Program

  13. Quantitative descriptive analysis and principal component analysis for sensory characterization of Indian milk product cham-cham.

    Science.gov (United States)

    Puri, Ritika; Khamrui, Kaushik; Khetra, Yogesh; Malhotra, Ravinder; Devraja, H C

    2016-02-01

    Promising development and expansion in the market of cham-cham, a traditional Indian dairy product is expected in the coming future with the organized production of this milk product by some large dairies. The objective of this study was to document the extent of variation in sensory properties of market samples of cham-cham collected from four different locations known for their excellence in cham-cham production and to find out the attributes that govern much of variation in sensory scores of this product using quantitative descriptive analysis (QDA) and principal component analysis (PCA). QDA revealed significant (p sensory attributes of cham-cham among the market samples. PCA identified four significant principal components that accounted for 72.4 % of the variation in the sensory data. Factor scores of each of the four principal components which primarily correspond to sweetness/shape/dryness of interior, surface appearance/surface dryness, rancid and firmness attributes specify the location of each market sample along each of the axes in 3-D graphs. These findings demonstrate the utility of quantitative descriptive analysis for identifying and measuring attributes of cham-cham that contribute most to its sensory acceptability.

  14. Cool Farm Tool – Potato: Model Description and Performance of Four Production Systems

    NARCIS (Netherlands)

    Haverkort, A.J.; Hillier, J.G.

    2011-01-01

    The Cool Farm Tool – Potato (CFT-Potato) is a spreadsheet programme that allows the calculation of the amount of CO2 equivalents that it costs to produce 1 t of potato. The spreadsheet was adapted from an original generic version of the tool, and completed for potato production in diverse production

  15. Revising Translations

    DEFF Research Database (Denmark)

    Rasmussen, Kirsten Wølch; Schjoldager, Anne

    2011-01-01

    The paper explains the theoretical background and findings of an empirical study of revision policies, using Denmark as a case in point. After an overview of important definitions, types and parameters, the paper explains the methods and data gathered from a questionnaire survey and an interview...... survey. Results clearly show that most translation companies regard both unilingual and comparative revisions as essential components of professional quality assurance. Data indicate that revision is rarely fully comparative, as the preferred procedure seems to be a unilingual revision followed by a more...... or less comparative rereading. Though questionnaire data seem to indicate that translation companies use linguistic correctness and presentation as the only revision parameters, interview data reveal that textual and communicative aspects are also considered. Generally speaking, revision is not carried...

  16. Revision of torrent mites (Parasitengona, Torrenticolidae, Torrenticola of the United States and Canada: 90 descriptions, molecular phylogenetics, and a key to species

    Directory of Open Access Journals (Sweden)

    J. Ray Fisher

    2017-09-01

    Full Text Available The descriptive biology of torrent mites (Parasitengona: Torrenticolidae: Torrenticola of North America (north of Mexico is investigated using integrative methods. Material examined includes approximately 2,300 specimens from nearly 500 localities across the United States and Canada, and a few collections in Mexico and Central America. Species hypotheses are derived from a phylogenetic analysis of the barcoding region of cytochrome c oxidase subunit 1 (COI for 476 specimens and supported with morphology and biogeography. Relationships between species are examined with a combined analysis of COI and two expansion regions (D2–3 of the large ribosomal subunit (28S rDNA for 57 specimens. All previously described species from the US and Canada are examined. Our results indicate the need to synonymize four species: T. mercedensis (Marshall, 1943 is a junior synonym of T. sierrensis (Marshall, 1943; T. rectiforma Habeeb, 1974 is a junior synonym of T. ellipsoidalis (Marshall, 1943; T. neoconnexa Habeeb, 1957 is a junior synonym of T. magnexa Habeeb, 1955; and T. esbelta Cramer, 1992 is a junior synonym of T. boettgeri KO Viets, 1977. We describe 66 new species and re-describe all previously described regional species. Our findings indicate that total diversity of Torrenticola in the United States and Canada comprises 90 species, 57 known from the east and 33 from the west. We organize these species into four species complexes that include 13 identification groups. An additional 13 species do not fit within an identification group. The southern Appalachians are suspected to contain the highest concentration of remaining undescribed diversity. A key is provided to all known species in the US and Canada.

  17. Revision of the Agathidinae (Hymenoptera, Braconidae) of Vietnam, with the description of forty-two new species and three new genera

    Science.gov (United States)

    van Achterberg, Cornelis; Long, Khuat Dang

    2010-01-01

    Abstract The species of seventeen genera of Agathidinae (Braconidae) from Vietnam are revised: Agathis Latreille, 1804, Bassus Fabricius, 1804; Biroia Szépligeti, 1900; Braunsia Kriechbaumer, 1894; Camptothlipsis Enderlein, 1920; Coccygidium de Saussure, 1892; Coronagathis gen. n. (type species: Coronagathis cornifera sp. n.); Cremnops Foerster, 1862; Disophrys Foerster, 1862; Earinus Wesmael, 1837; Euagathis Szépligeti, 1900; Gyragathis gen. n. (type species: Gyragathis quyi sp. n.), Gyrochus Enderlein, 1920; Lytopylus Foerster, 1862; Therophilus Wesmael, 1837; Troticus Brullé, 1846, and Zelodia gen. n. (type species: Zelomorpha varipes van Achterberg & Maetô, 1990). Keys to the Vietnamese species are given. Sixty-five species are recognised, of which twelve species are newly recorded for Vietnam: Bassus albifasciatus (Watanabe, 1934), Coccygidium angostura (Bhat & Gupta, 1977), Cremnops atricornis (Smith, 1874), stat. n., Disophrys erythrocephala Cameron, 1900, Gyrochus yunnanensis Wang, 1984, Lytopylus romani (Shestakov, 1940), comb. n., Therophilus festivus (Muesebeck, 1953), comb. n., Therophilus javanus (Bhat & Gupta, 1977), comb. n., Therophilus lienhuachihensis (Chou & Sharkey, 1989), comb. n., Therophilus marshi (Bhat & Gupta, 1977), comb. n., Zelodia absoluta (Chen & Yang, 1998), comb. n. and Zelodia longidorsata (Bhat & Gupta, 1977), comb. n. Forty-two species are new to science: Agathis citrinisoma sp. n., Bassus albobasalis sp. n., Bassus albozonatus sp. n., Biroia soror sp. n., Braunsia bicolorata sp. n., Braunsia devriesi sp. n., Braunsia maculifera sp. n., Braunsia nigrapiculata sp. n., Braunsia pumatica sp. n., Camptothlipsis hanoiensis sp. n., Coronagathis cornifera sp. n., Earinus aurantius sp. n., Earinus brevistigmus sp. n., Euagathis flavosoma sp. n., Disophrys maculifera sp. n., Disophrys quymanhi sp. n., Disophrys rhinoides sp. n., Gyragathis quyi sp. n., Therophilus annuliferus sp. n., Therophilus cattienensis sp. n., Therophilus

  18. Relativistic description of pair production of doubly heavy baryons in e+e− annihilation

    International Nuclear Information System (INIS)

    Martynenko, A. P.; Trunin, A. M.

    2015-01-01

    Relativistic corrections in the pair production of S-wave doubly heavy diquarks in electron-positron annihilation were calculated on the basis of perturbative QCD and the quark model. The relativistic corrections to the wave functions for quark bound states were taken into account with the aid of the Breit potential in QCD. Relativistic effects change substantially the nonrelativistic cross sections for pair diquark production. The yield of pairs of (ccq) doubly heavy baryons at B factories was estimated

  19. Description of the CNEA U308 powder production plant for low enrichment fuel plates

    International Nuclear Information System (INIS)

    Boero, N.L.; Celora, J.; Parodi, C.A.; Pertossi, F.R.; Marajofsky, A.

    1987-01-01

    The design of the 20% enriched U 3 O 8 powder production plant was based on laboratory level experiments. The UF 6 hydrolysis, ADU precipitation, U 3 O 8 conversion processes were used. The equipment, controls and confinement were set not only by the processes but also by safety requirements according to the kind and physical form of the uranium compounds in each stage and criticality considerations. This paper describes the installation, set up and operation of the plant during production. (Author)

  20. Nevada Test Site Radiological Control Manual. Revision 1

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2010-02-09

    This document supersedes DOE/NV/25946--801, “Nevada Test Site Radiological Control Manual,” Revision 0 issued in October 2009. Brief Description of Revision: A minor revision to correct oversights made during revision to incorporate the 10 CFR 835 Update; and for use as a reference document for Tenant Organization Radiological Protection Programs.

  1. Heavy-quark production as a sensitive test for an improved description of high-energy hadron collisions

    CERN Document Server

    Hagler, P; Schäfer, A; Szymanowski, L; Teryaev, O V

    2000-01-01

    QCD dynamics at small quark and gluon momentum fractions or large total energy, which plays a major role for DESY HERA, the Fermilab Tevatron, BNL RHIC and CERN LHC physics, is still poorly understood. For one of the simplest processes, namely bb production, next-to- leading-order perturbation theory fails. We show that the combination of two recently developed theoretical concepts, the k/sub perpendicular to / factorization and the next-to-leading-logarithmic- approximation Balitskii-Fadin-Kuraev-Lipatov vertex, gives perfect agreement with data. One can therefore hope that these concepts provide a valuable foundation for the description of other high energy processes. (18 refs).

  2. A quantitative description of state-level taxation of oil and gas production in the continental U.S

    International Nuclear Information System (INIS)

    Weber, Jeremy G.; Wang, Yongsheng; Chomas, Maxwell

    2016-01-01

    We provide a quantitative description of state-level taxation of oil and gas production in the continental U.S. for 2004–2013. Aggregate revenues from production taxes nearly doubled in real terms over the period, reaching $10.3 billion and accounting for 20% of tax receipts in the top ten revenue states. The average state had a tax rate of 3.6%; nationally, the average dollar of production was taxed at 4.2%. The oil-specific rate estimated for the study period is $2.4 per barrel or $5.5 per ton of carbon. Lastly, state-level tax rates are two-thirds higher in states excluding oil and gas wells from local property taxes, suggesting that the policies are substitutes for one another. - Highlights: •State tax revenue from oil and gas production nearly doubled from 2004 to 2013. •Nationally, the typical dollar of production is taxed at 4.2%. •The rate applied to the typical dollar of production did not increase over time. •On average oil is taxed at $2.4 per barrel or $5.5 per ton of carbon. •State tax rates are two-thirds higher where oil and gas are not taxed as property.

  3. Pair production in semiclassical and quantum-field theoretical description; Paarerzeugung in semiklassischer und quantenfeldtheoretischer Beschreibung

    Energy Technology Data Exchange (ETDEWEB)

    Woellert, Anton

    2016-07-27

    Pair production of electron-positron pairs in ultra-intense laser fields is considered in this work. Two regimes are investigated separately. The first regime is the so-called tunnel regime of pair production. The existing tunneling picture which is applicable in this regime will be enhanced by the effects of a magnetic field and an additional, perturbatively treated photon. Both effects are incorporated by the semi-classical approximation. In contrast, no straightforward approach exists so far for the second regime of pair production. Therefore, numerical calculations will be carried out by applying the framework of the in/out-formalism in external fields. These simulations show non-trivial effects that are be expected in this regime. Specifically, the influence of the electromagnetic fields' polarization upon the produced pair spectra is investigated. Furthermore, multi-pair states are studied.

  4. Semiclassical description of soliton-antisoliton pair production in particle collisions

    Energy Technology Data Exchange (ETDEWEB)

    Demidov, S.V.; Levkov, D.G. [Institute for Nuclear Research of the Russian Academy of Sciences,60th October Anniversary prospect 7a, Moscow 117312 (Russian Federation)

    2015-11-10

    We develop a consistent semiclassical method to calculate the probability of topological soliton-antisoliton pair production in collisions of elementary particles. In our method one adds an auxiliary external field pulling the soliton and antisoliton in the opposite directions. This transforms the original scattering process into a Schwinger pair creation of the solitons induced by the particle collision. One describes the Schwinger process semiclassically and recovers the original scattering probability in the limit of vanishing external field. We illustrate the method in (1+1)-dimensional scalar field model where the suppression exponents of soliton-antisoliton production in the multiparticle and two-particle collisions are computed numerically.

  5. The GOLD Science Data Center - Algorithm Heritage, Data Product Descriptions and User Services

    Science.gov (United States)

    Lumpe, J. D.; Foroosh, H.; Eastes, R.; Krywonos, A.; Evans, J. S.; Burns, A. G.; Strickland, D. J.; Daniell, R. E.; England, S.; Solomon, S. C.; McClintock, W. E.; Anderson, D. N.

    2013-12-01

    The Global-scale Observations of the Limb and Disk (GOLD) instrument is an imaging spectrograph to be launched onboard a commercial communications satellite in 2017. From its vantage point in geosynchronous orbit GOLD will image the Earth in the far-ultraviolet from 132 to 162 nm. The instrument consists of two independent optical channels, allowing for simultaneous implementation of multiple measurement sequences with different temporal sampling and spectral resolution. In addition to continuously scanning the disk of the Earth, GOLD will also perform routine limb scan and stellar occultation measurements. These measurements will be used to retrieve a variety of data products characterizing the temperature and composition of the thermosphere-ionosphere, and their response to geomagnetic storms and solar forcing. Primary data products include: daytime neutral temperatures near 160 km altitude; daytime O/N2 column density ratios; nighttime peak electron density; thermospheric O2 density profiles (day and night); daytime exospheric neutral temperature on the limb; atmospheric tides from temperature perturbations; and the location and evolution of ionospheric bubbles. GOLD data will be processed at the Science Data Center (SDC) located at the University of Central Florida. The SDC will also serve as the primary gateway for distribution of GOLD data products to end-users. In this talk we summarize the heritage and theoretical basis of the GOLD retrieval algorithms and describe the full range of GOLD data products that will be available at the SDC, including estimates of data latency and quality.

  6. The dairy industry: a brief description of production practices, trends, and farm characteristics around the world.

    Science.gov (United States)

    Douphrate, David I; Hagevoort, G Robert; Nonnenmann, Matthew W; Lunner Kolstrup, Christina; Reynolds, Stephen J; Jakob, Martina; Kinsel, Mark

    2013-01-01

    The global dairy industry is composed of a multitude of countries with unique production practices and consumer markets. The global average number of cows per farm is about 1-2 cows; however, as a farm business model transitions from sustenance to market production, the average herd size, and subsequent labor force increases. Dairy production is unique as an agricultural commodity because milk is produced daily, for 365 days per year. With the introduction of new technology such as the milking parlor, the global industry trend is one of increasing farm sizes. The farm sizes are the largest in the United States; however, the European Union produces the most milk compared with other global producers. Dairy production is essential for economic development and sustainable communities in rural areas. However, the required capital investment and availability of local markets and labor are continued challenges. Due to farm expansion, international producers are faced with new challenges related to assuring food safety and a safe working environment for their workforce. These challenges exist in addition to the cultural and language barriers related to an increasing dependence on immigrant labor in many regions of the world. Continued success of the global dairy industry is vital. Therefore, research should continue to address the identification of occupational risk factors associated with injuries and illnesses, as well as develop cost-effective interventions and practices that lead to the minimization or elimination of these injuries and illnesses on a global scale, among our valuable population of dairy producers and workers.

  7. Description of historical crop calendar data bases developed to support foreign commodity production forecasting project experiments

    Science.gov (United States)

    West, W. L., III (Principal Investigator)

    1981-01-01

    The content, format, and storage of data bases developed for the Foreign Commodity Production Forecasting project and used to produce normal crop calendars are described. In addition, the data bases may be used for agricultural meteorology, modeling of stage sequences and planting dates, and as indicators of possible drought and famine.

  8. Perception and description of premium beers by panels with different degrees of product expertise

    DEFF Research Database (Denmark)

    Giacalone, Davide; Ribeiro, Leticia Machado; Frøst, Michael Bom

    2016-01-01

    of consumers, classified according to their self-assessed product expertise into “Novices” (N = 14) and “Enthusiasts” (N = 26). The sensory panel at a large brewery, and a group of master brewers constituted the third panel (“Experts”, N = 15). The Napping® data from the three panels were digitalized using...

  9. Animal-derived natural products of Sowa Rigpa medicine: Their pharmacopoeial description, current utilization and zoological identification.

    Science.gov (United States)

    Yeshi, Karma; Morisco, Paolo; Wangchuk, Phurpa

    2017-07-31

    The Bhutanese Sowa Rigpa medicine (BSM) uses animal parts in the preparation of numerous polyingredient traditional remedies. Our study reports the taxonomical identification of medicinal animals and the description of traditional uses in English medical terminologies. To taxonomically identify the medicinal animals and their derived natural products used as a zootherapeutic agents in BSM. First, the traditional textbooks were reviewed to generate a list of animal products described as ingredients. Second, animal parts that are currently used in Bhutan were identified. Third, the ethnopharmacological uses of each animal ingredients were translated into English medical terminologies by consulting Traditional Physicians, clinical assistants, pharmacognosists, and pharmacists in Bhutan. Fourth, the animal parts were taxonomically identified and their Latin names were confirmed by crosschecking them with online animal databases and relevant scientific literature. The study found 73 natural products belonging to 29 categories derived from 45 medicinal animals (36 vertebrates and 9 invertebrates), comprising of 9 taxonomic categories and 30 zoological families. Out of 116 formulations currently produced, 87 of them contain one or more extracts and products obtained from 13 medicinal animals to treat more than 124 traditionally classified illnesses. Only five animal ingredients were found available in Bhutan and rest of the animal parts are being imported from India. Out of 73 natural products described in the traditional textbooks, only 13 of them (some omitted and few substituted by plants) are currently included in 87 formulations of BSM. Copyright © 2017 Elsevier Ireland Ltd. All rights reserved.

  10. Design requirements for SRB production control system. Volume 2: System requirements and conceptual description

    Science.gov (United States)

    1981-01-01

    In the development of the business system for the SRB automated production control system, special attention had to be paid to the unique environment posed by the space shuttle. The issues posed by this environment, and the means by which they were addressed, are reviewed. The change in management philosphy which will be required as NASA switches from one-of-a-kind launches to multiple launches is discussed. The implications of the assembly process on the business system are described. These issues include multiple missions, multiple locations and facilities, maintenance and refurbishment, multiple sources, and multiple contractors. The implications of these aspects on the automated production control system are reviewed including an assessment of the six major subsystems, as well as four other subsystem. Some general system requirements which flow through the entire business system are described.

  11. The OCO-2 Version 8 XCO2 Data Product Fall 2017 Release: Description and Preliminary Validation

    Science.gov (United States)

    O'Dell, C.; Eldering, A.; Crisp, D.; Fisher, B.; Gunson, M. R.; Kiel, M.; Mandrake, L.; Taylor, T. L.; Wennberg, P. O.

    2017-12-01

    Since beginning its science mission in September 2014, the Orbiting Carbon Observatory-2 (OCO-2) has provided 1-2 million estimates of the column average carbon dioxide (CO2) dry air mole fraction, XCO2, each month. While the Version-7 (V7) OCO-2 data product is generally of high quality, it includes some notable biases, including low and high biases in the tropical and extratropical oceans, respectively, and biases associated with unscreened clouds and variable topography. Because even small (top-down inversion approaches. We present significant changes introduced in the new Version 8 (V8) XCO2 data product. These changes reflect improvements in instrument calibration, cloud filtering, the retrieval algorithm itself, and post-filtering methods. The most noteworthy change involved the inclusion of an optically-thin, upper-tropospheric/lower stratospheric aerosol type which simulates small aerosol particles high in the atmosphere, such as the Junge Layer and aerosols due to volcanic eruptions. It also mitigates the impact of zero level offsets due to a thin layer of ice that accumulates on the OCO-2 detectors, which actually mimics a small, lofted aerosol particle in the retrieval forward model. We show comparisons of the new XCO2 product to both TCCON and models. Improvements in the V8 screening also provides additional data over tropical oceans, which may enhance coverage in these regions. These data are currently being evaluated. Similarly, the new version 8 data may enable improved coverage at higher latitudes via a renewed focus on the challenging retrievals at higher solar zenith angles and over snow and ice covered surfaces.

  12. Theoretical approach to description of some corrosion product transport processes in PWRs primary circuit

    International Nuclear Information System (INIS)

    Zmitko, M.

    1990-10-01

    The behavior and mass transport of corrosion products in primary circuits of PWR type reactors are described assuming that the products occur in ionic form, in colloidal form (about 0.01-0.6 μm in size) and in particulate form. The transport of the soluble form is treated as a diffusion process. For the colloidal form, allowance is made for its Van der Waals attraction and repulsion interaction with the surfaces. For particles and their agglomerates, the hydrodynamical effects of the flowing liquid on the agglomerate breakdown and re-formation of the particle suspension are taken into account. Efforts were made to employ theoretical relations rather than particular experimental data, for the conclusions to be applicable to different facilities. It is believed that the complex approach to the problem can contribute to gaining insight into the role of the individual factors and processes involved, particularly as regards colloidal particles whose effect on the formation of radiation fields is not yet fully understood. (author). 3 figs., 10 refs

  13. [Examination of analytical method for triphenyltin (TPT) and tributyltin (TBT) to revise the official methods based on "Act on the Control of Household Products Containing Harmful Substances"].

    Science.gov (United States)

    Kawakami, Tsuyoshi; Isama, Kazuo; Nakashima, Harunobu; Yoshida, Jin; Ooshima, Tomoko; Ohno, Hiroyuki; Uemura, Hitoshi; Shioda, Hiroko; Kikuchi, Yoko; Matsuoka, Atsuko; Nishimura, Tetsuji

    2012-01-01

    The use of triphenyltin (TPT) and tributyltin (TBT) in some household products is banned by "Act on the Control of Household Products Containing Harmful Substances" in Japan. To revise the official analytical method, the method for detecting these organotin compounds was examined in six laboratories using a textile product, water-based adhesive, oil-based paint, which contained known amounts of TPT and TBT (0.1, 1.0, 10 μg/g). TPT and TBT were measured by GC-MS after ethyl-derivation with sodium tetraethylborate. The TBT recoveries in the samples were 70-120%. The TPT recoveries in the water-based adhesive samples were 80-110%, while its concentrations in the textile product and oil-based paint samples decreased because of dephenylation during storage. However, the precision of the method examined was satisfactory because most coefficients of variation for TPT and TBT in the samples were less than 10%. Furthermore, the revised method was able to detect concentrations lower than the officially regulated value. However, the sample matrix and the condition of analytical instrument might affect the estimated TPT and TBT concentrations. Therefore, the revised method may not be suitable for quantitative tests; rather, it can be employed to judge the acceptable levels of these organotin compounds by comparing the values of control sample containing regulated amounts of TPT and TBT with those for an unknown sample, with deuterated TPT and TBT as surrogate substances. It is desirable that TPT in textile and oil-based paint samples are analyzed immediately after the samples obtained because of the decomposition of TPT.

  14. RDA resource, description and access, 2013 revision

    CERN Document Server

    2013-01-01

    This full-text print version of RDA offers a snapshot that serves as an offline access point to help solo and part-time cataloguers evaluate RDA, as well as to support training and classroom use in any size institution. An index is included.

  15. Empirical description of the element production cross sections in dissipative heavy-ion collisions

    International Nuclear Information System (INIS)

    Wollersheim, H.J.

    1984-06-01

    Correlations between experimental observables yield analytical expressions for the energy dsigma/dE and element distributions dsigma/dZ, d 2 sigma/dZdE in dissipative collisions. These empirical formulas are applied to twelve heavy ion systems at bombarding energies well above the Coulomb barrier. The element production can be calculated for all kinetic energies of the reaction fragments from the quasi-elastic region down to a minimum total kinetic energy Vsub(c)sup(def) which is the result of the Coulomb repulsion of two deformed nuclei prior to scission. In cases where the dissipative collisions are the dominant part of the reaction process, the deformed Coulomb energy can also be deduced from the total reaction cross section. For these heavy ion systems the empirical formulas depend only on quantities of the ingoing channels. Especially, the normalization of the Gaussian shaped element distributions indicates that the reminiscence on the entrance channel is not completely lost in dissipative collisions. For the 209 Bi + 136 Xe reaction at a laboratory bombarding energy of 1130 MeV the energy and element distributions are calculated which show an excellent agreement with the experimental data. (orig.)

  16. The polyphasic description of a Desmodesmus spp. isolate with the potential of bioactive compounds production

    Directory of Open Access Journals (Sweden)

    El Semary, NA.

    2011-01-01

    Full Text Available A polyphasic approach was applied to describe a colony-forming Desmodesmus species collected from the Nile River, Maadi area, Helwan district, Egypt. The isolate grows best at moderate temperature and relatively high light intensity. The phenotypic features revealed the presence of both unicellular and colonial forms of the isolate and the latter form was either 2-4 celled. Cells were 4-6 mm ± 0.5 at their widest point and 11-15 mm ± 0.48 in their length with spiny projections that encircled the cells. Cells were heavily-granulated and enclosed within common mucilaginous sheath. Colonial forms were developed through production of daughter cells within mother cell. Molecular analysis using 18S rRNA gene showed some similarity to its nearest relative (Desmodesmus communis whereas the phylogenetic analyses clustered it together with other Desmodesmus spp. and away from Scenedesmus spp. from the database. However, the use of ITS-2 as a phylotaxonomic marker proved to be more resolving and confirmed the generic identity of the isolate as Desmodesmus spp. The fatty acid composition revealed the presence of saturated palmitic fatty acid as the most abundant component followed by monounsaturated palmitoleic acid whereas the polyunsaturated fatty acids were in relatively low abundance. The palmitoleic acid in particular is suggested to be involved in active defense mechanism. The phytochemical screening revealed the presence of alkaloids and saponins and absence of tannins. Fractions of methanolic extracts showed antimicrobial activities against pathogenic bacterial strains including multi-drug resistant ones. This study documents the presence of this strain in the River Nile and highlights its biotechnological potential as a source of bioactive compounds.

  17. Revision of the new world species of Hylurgops LeConte, 1876 with the description of a new genus in the Hylastini (Coleoptera: Scolytinae) and comments on some Palearctic species

    Science.gov (United States)

    Javier E. Mercado-Velez; Jose F. Negron

    2014-01-01

    The New World species of the genus Hylurgops LeConte are revised and Hylurgops subcostulatus Mannerheim is transferred to the new genus Pachysquamus. A revised key to the tribe Hylastini which can be used for the world fauna is presented to include Pachysquamus. Our studies suggest that the Nearctic species H. knausi Swaine is a valid taxon, distinguishable from the...

  18. CRAC2 model description

    International Nuclear Information System (INIS)

    Ritchie, L.T.; Alpert, D.J.; Burke, R.P.; Johnson, J.D.; Ostmeyer, R.M.; Aldrich, D.C.; Blond, R.M.

    1984-03-01

    The CRAC2 computer code is a revised version of CRAC (Calculation of Reactor Accident Consequences) which was developed for the Reactor Safety Study. This document provides an overview of the CRAC2 code and a description of each of the models used. Significant improvements incorporated into CRAC2 include an improved weather sequence sampling technique, a new evacuation model, and new output capabilities. In addition, refinements have been made to the atmospheric transport and deposition model. Details of the modeling differences between CRAC2 and CRAC are emphasized in the model descriptions

  19. Two-step rating-based 'double-faced applicability' test for sensory analysis of spread products as an alternative to descriptive analysis with trained panel.

    Science.gov (United States)

    Kim, In-Ah; den-Hollander, Elyn; Lee, Hye-Seong

    2018-03-01

    Descriptive analysis with a trained sensory panel has thus far been the most well defined methodology to characterize various products. However, in practical terms, intensive training in descriptive analysis has been recognized as a serious defect. To overcome this limitation, various novel rapid sensory profiling methodologies have been suggested in the literature. Among these, attribute-based methodologies such as check-all-that-apply (CATA) questions showed results comparable to those of conventional sensory descriptive analysis. Kim, Hopkinson, van Hout, and Lee (2017a, 2017b) have proposed a novel attribute-based methodology termed the two-step rating-based 'double-faced applicability' test with a novel output measure of applicability magnitude (d' A ) for measuring consumers' product usage experience throughout various product usage stages. In this paper, the potential of the two-step rating-based 'double-faced applicability' test with d' A was investigated as an alternative to conventional sensory descriptive analysis in terms of sensory characterization and product discrimination. Twelve commercial spread products were evaluated using both conventional sensory descriptive analysis with a trained sensory panel and two-step rating-based 'double-faced applicability' test with an untrained sensory panel. The results demonstrated that the 'double-faced applicability' test can be used to provide a direct measure of the applicability magnitude of sensory attributes of the samples tested in terms of d' A for sensory characterization of individual samples and multiple sample comparisons. This suggests that when the appropriate list of attributes to be used in the questionnaire is already available, the two-step rating-based 'double-faced applicability' test with d' A can be used as a more efficient alternative to conventional descriptive analysis, without requiring any intensive training process. Copyright © 2017 Elsevier Ltd. All rights reserved.

  20. Description of the rates, trends and surgical burden associated with revision for prosthetic joint infection following primary and revision knee replacements in England and Wales: an analysis of the National Joint Registry for England, Wales, Northern Ireland and the Isle of Man.

    Science.gov (United States)

    Lenguerrand, Erik; Whitehouse, Michael R; Beswick, Andrew D; Toms, Andrew D; Porter, Martyn L; Blom, Ashley W

    2017-07-10

    To describe the prevalence rates of revision surgery for the treatment of prosthetic joint infection (PJI) for patients undergoing knee replacement, their time trends, the cumulative incidence function of revision for PJI and estimate the burden of PJI at health service level. We analysed revision knee replacements performed due to a diagnosis of PJI and the linked index procedures recorded in the National Joint Registry from 2003 to 2014 for England and Wales. The cohort analysed consisted of 679 010 index primary knee replacements, 33 920 index revision knee replacements and 8247 revision total knee replacements performed due to a diagnosis of PJI. The prevalence rates, their time trends investigated by time from index surgery to revision for PJI, cumulative incidence functions and the burden of PJI (total procedures) were calculated. Overall linear trends were investigated with log-linear regression. The incidence of revision total knee replacement due to PJI at 2 years was 3.2/1000 following primary and 14.4/1000 following revision knee replacement, respectively. The prevalence of revision due to PJI in the 3 months following primary knee replacement has risen by 2.5-fold (95% CI 1.2 to 5.3) from 2005 to 2013 and 7.5-fold (95% CI 1.0 to 56.1) following revision knee replacement. Over 1000 procedures per year are performed as a consequence of knee PJI, an increase of 2.8 from 2005 to 2013. Overall, 75% of revisions were two-stage with an increase in use of single-stage from 7.9% in 2005 to 18.8% in 2014. Although the risk of revision due to PJI following knee replacement is low, it is rising, and coupled with the established and further predicted increased incidence of both primary and revision knee replacements, this represents an increasing and substantial treatment burden for orthopaedic service delivery in England and Wales. This has implications for future service design and the funding of individual and specialist centres. © Article author

  1. Revised licensee event report system

    International Nuclear Information System (INIS)

    Mays, G.T.; Poore, W.P.

    1985-01-01

    Licensee Event Reports (LERs) provide the basis for evaluating and assessing operating experience information from nuclear power plants. The reporting requirements for submitting LERs to the Nuclear Regulatory Commission have been revised. Effective Jan. 1, 1984, all events were to be submitted in accordance with 10 CFR 50.73 of the Code of Federal Regulations. Report NUREG-1022, Licensee Event Report System-Description of System and Guidelines for Reporting, describes the guidelines on reportability of events. This article summarizes the reporting requirements as presented in NUREG-1022, high-lights differences in data reported between the revised and previous LER systems, and presents results from a preliminary assessment of LERs submitted under the revised LER reporting system

  2. Evalutive Descriptions of Art

    Directory of Open Access Journals (Sweden)

    Nataša Lah

    2016-01-01

    consequence of an irreversible and entropic state of culture in the 21st century. We should therefore aim at a revision, not so much of the hitherto accepted and standardized values, but rather of the present systems of evaluation and the ensuing evaluative descriptions of art.

  3. Short synthesis of 3-(hydroxymethyl)xylitol and structure revision of the anti-diabetic natural product from Casearia esculenta.

    Science.gov (United States)

    Wang, Ruomeng; Paddon-Row, Michael N; Sherburn, Michael S

    2013-11-01

    3-(Hydroxymethyl)xylitol, a compound reportedly isolated from the root of Casearia esculenta (Roxb.), along with its three possible stereoisomers, has been synthesized for the first time by way of a triple dihydroxylation reaction performed upon the simplest cross-conjugated hydrocarbon, [3]dendralene. The data for the natural product do not match any of the isomeric 3-(hydroxymethyl)pentitols. The structure of the natural product from the root of Casearia esculenta (Roxb.) has been corrected by reanalysis of the published data.

  4. Bibliographic Review about Solar Hydrogen Production Through Thermochemical Cycles; Revision Bibliografica sobre la Produccion de Hidrogeno Solar Mediante Ciclos Termoquimicos

    Energy Technology Data Exchange (ETDEWEB)

    Fernandez Saavedra, R.

    2008-08-06

    This report presents a summary of the different thermical processes used to obtain hydrogen through solar energy, paying more attention to the production of hydrogen from water through thermochemical cycles. In this aspect, it is briefly y described the most interesting thermochemical cycles, focusing on thermochemical cycles based on oxides. (Author) 25 refs.

  5. Bibliographic Review about Solar Hydrogen Production Through Thermochemical Cycles; Revision Bibliografica sobre la Produccion de Hidrogeno Solar Mediante Ciclos Termoquimicos

    Energy Technology Data Exchange (ETDEWEB)

    Fernandez Saavedra, R.

    2007-12-28

    This report presents a summary of the different thermical processes used to obtain hydrogen through solar energy, paying more attention to the production of hydrogen from water through thermochemical cycles. In this aspect, it is briefly described the most interesting thermochemical cycles, focusing on thermochemical cycles based on oxides. (Author) 25 refs.

  6. Feasibility Study for Co-Locating and Integrating Ethanol Production Plants from Corn Starch and Lignocellulosic Feedstocks (Revised)

    Energy Technology Data Exchange (ETDEWEB)

    Wallace, R.; Ibsen, K.; McAloon, A.; Yee, W.

    2005-01-01

    Analysis of the feasibility of co-locating corn-grain-to-ethanol and lignocellulosic ethanol plants and potential savings from combining utilities, ethanol purification, product processing, and fermentation. Although none of the scenarios identified could produce ethanol at lower cost than a straight grain ethanol plant, several were lower cost than a straight cellulosic ethanol plant.

  7. Revising the potential of large-scale Jatropha oil production in Tanzania: An economic land evaluation assessment

    International Nuclear Information System (INIS)

    Segerstedt, Anna; Bobert, Jans

    2013-01-01

    Following up the rather sobering results of the biofuels boom in Tanzania, we analyze the preconditions that would make large-scale oil production from the feedstock Jatropha curcas viable. We do this by employing an economic land evaluation approach; first, we estimate the physical land suitability and the necessary inputs to reach certain amounts of yields. Subsequently, we estimate costs and benefits for different input-output levels. Finally, to incorporate the increased awareness of sustainability in the export sector, we introduce also certification criteria. Using data from an experimental farm in Kilosa, we find that high yields are crucial for the economic feasibility and that they can only be obtained on good soils at high input rates. Costs of compliance with certification criteria depend on site specific characteristics such as land suitability and precipitation. In general, both domestic production and (certified) exports are too expensive to be able to compete with conventional diesel/rapeseed oil from the EU. Even though the crop may have potential for large scale production as a niche product, there is still a lot of risk involved and more experimental research is needed. - Highlights: ► We use an economic land evaluation analysis to reassess the potential of large-scale Jatropha oil. ► High yields are possible only at high input rates and for good soil qualities. ► Production costs are still too high to break even on the domestic and export market. ► More research is needed to stabilize yields and improve the oil content. ► Focus should be on broadening our knowledge-base rather than promoting new Jatropha investments

  8. A Revision of Lasionycta Aurivillius (Lepidoptera: Noctuidae) for North America and notes on Eurasian species, with descriptions of 17 new species, 6 new subspecies, a new genus, and two new species of Tricholita Grote

    OpenAIRE

    Crabo,Lars; Lafontaine,Donald

    2009-01-01

    The North American species of Lasionycta Aurivillius are revised to include 43 species and 13 subspecies using traditional methods and mitochondrial cytochrome oxidase subunit 1 (CO1) DNA sequence (barcode) analysis. Seven species-groups are recognized, and one group is further divided into seven sub-groups. Seventeen species and six subspecies of Lasionycta are described: L. anthracina Crabo & Lafontaine, L. benjamini medaminosa Crabo & Lafontaine, L. brunnea Crabo & Lafontaine, ...

  9. Brief description of out-of-pile test facilities for study in corrosion and fission product behaviour in flowing sodium

    International Nuclear Information System (INIS)

    Iizawa, K.; Sekiguchi, N.; Atsumo, H.

    1976-01-01

    The experimental methods to perform tests for study in corrosion and fission products behaviour in flowing sodium are outlined. Flow diagrams for the activated materials and fission products behaviour test loop are given

  10. Water activities in Forsmark. Ecological field inventory and classification of biodiversity values and description of forest production land

    International Nuclear Information System (INIS)

    Hamren, Ulrika; Collinder, Per

    2010-12-01

    In 2009, the Swedish Nuclear Fuel and Waste Management Co (SKB) chose Forsmark in the Municipality of Oesthammar as site for the final repository for spent nuclear fuel. This report describes nature values and forestry areas in Forsmark, and provides part of the background material for description of consequences due to groundwater diversion during construction and operation of the repository. The report describes results of map studies and comprehensive field investigations, in terms of geographical delineations, descriptions of characteristics and classifications of nature values for groundwater dependent or groundwater favoured nature objects in Forsmark. The nature objects are located in an investigation area, which contains the area that according to numerical flow modelling could be affected by groundwater-table drawdown due to groundwater diversion

  11. Revised SRAC code system

    International Nuclear Information System (INIS)

    Tsuchihashi, Keichiro; Ishiguro, Yukio; Kaneko, Kunio; Ido, Masaru.

    1986-09-01

    Since the publication of JAERI-1285 in 1983 for the preliminary version of the SRAC code system, a number of additions and modifications to the functions have been made to establish an overall neutronics code system. Major points are (1) addition of JENDL-2 version of data library, (2) a direct treatment of doubly heterogeneous effect on resonance absorption, (3) a generalized Dancoff factor, (4) a cell calculation based on the fixed boundary source problem, (5) the corresponding edit required for experimental analysis and reactor design, (6) a perturbation theory calculation for reactivity change, (7) an auxiliary code for core burnup and fuel management, etc. This report is a revision of the users manual which consists of the general description, input data requirements and their explanation, detailed information on usage, mathematics, contents of libraries and sample I/O. (author)

  12. Water activities in Laxemar-Simpevarp. Organic field inventory, nature values classification and description of production land

    International Nuclear Information System (INIS)

    Hamren, Ulrika; Collinder, Per

    2010-10-01

    This report describes nature values, agricultural areas and forestry areas in Laxemar, for which there could be negative consequences due to groundwater diversion during construction and operation of a repository for spent nuclear fuel in the rock. In 2009, the Swedish Nuclear Fuel and Waste Management Co (SKB) chose Forsmark as site for the repository. This report hence concerns the non-chosen Laxemar site. The report describes results from map studies and comprehensive field investigations, in terms of geographical delineations, descriptions of characteristics and classifications of nature values for groundwater dependent of -favoured nature objects. The nature objects are located in an investigation area, which according to numerical flow modelling could be affected by groundwater-table drawdown due to groundwater diversion. The investigation area contains a number of valuable nature habitats, but no protected areas in the form of nature reserves or Natura 2000 areas. In the investigation area 67 nature objects have been identified, geographically delineated and classified according to their nature values. Of these nature objects, 32 consist of forest objects (including moist forests), 26 consist of wetland objects, and nine consist of surface waters (streams, lakes and ponds). The nature-value classifications of objects are primarily based on habitat rareness and worth of protection on a national scale, and their importance as habitats for rare and threatened species. None of the identified nature objects is judged to be of national value (class 1). 15 nature objects (forest objects) are judged to be of regional value (class 2), 18 objects of municipal value (class 3) and 34 objects are judged to be of local value (class 4). Most of the nature objects contain nature values that are associated to factors other than the level of the groundwater table, primarily previous land uses in the form of grazing and hay cutting. There are also values associated to valuable

  13. An exploratory, descriptive study of consumer opinions and behaviors regarding health products sales at 4 chiropractic practices in a large, western Canadian urban center.

    Science.gov (United States)

    Page, Stacey A; Mbadiwe, Chinyere; McMorland, D Gordon; Grod, Jaroslaw P

    2015-01-01

    This study describes the opinions and behaviors of chiropractic patients in a large, western Canadian urban center regarding the sale of health products by doctors of chiropractic. A brief, descriptive survey consisting of both fixed-choice and open-ended questions was distributed by clinic reception staff at 4 chiropractic offices in Calgary, Alberta, Canada. Each practice sold a range of health products, including those relating to musculoskeletal care and nutrition, and served between 275 and 320 clients per week. After a 10-week recruitment interval between January and March 2013, a convenience sample of 103 chiropractic patients was obtained. Most patients supported the sale of health products by doctors of chiropractic (n = 101; 98.1%), and most had made health product purchases from a doctor of chiropractic at some point (n = 73; 70.9%). Products relating to muscular care, exercise/rehabilitation products, and pillows were purchased most often (>40%). Consumers were most supportive of doctors of chiropractic selling products they perceived to be directly related to musculoskeletal care. Some participants believed that there should be limits placed on the range of products sold including the products had to be consistent with the practitioner's area of expertise and had to have some demonstrated level of effectiveness. Primary reasons for health product purchase included the doctor's recommendations, convenience, and perception that the product would improve well-being (>50%). This study found that chiropractic patients were supportive of health product sales by doctors of chiropractic, assuming certain conditions were met. Consumers believed that product sales should be undertaken with integrity and should be consistent with the doctor's area of expertise. Consumer beliefs appeared to impact their purchasing behaviors. Copyright © 2015 National University of Health Sciences. Published by Elsevier Inc. All rights reserved.

  14. Waste Management System Description Document (WMSD)

    International Nuclear Information System (INIS)

    1992-02-01

    This report is an appendix of the ''Waste Management Description Project, Revision 1''. This appendix is about the interim approach for the technical baseline of the waste management system. It describes the documentation and regulations of the waste management system requirements and description. (MB)

  15. Descriptive Research

    DEFF Research Database (Denmark)

    Wigram, Anthony Lewis

    2003-01-01

    Descriptive research is described by Lathom-Radocy and Radocy (1995) to include Survey research, ex post facto research, case studies and developmental studies. Descriptive research also includes a review of the literature in order to provide both quantitative and qualitative evidence of the effect...... starts will allow effect size calculations to be made in order to evaluate effect over time. Given the difficulties in undertaking controlled experimental studies in the creative arts therapies, descriptive research methods offer a way of quantifying effect through descriptive statistical analysis...

  16. Simulation of Rn-222 decay products concentration deposited on a filter. Description of radon1.pas computer program

    International Nuclear Information System (INIS)

    Machaj, B.

    1996-01-01

    A computer program allowing simulation of activity distribution of 222 Rn short lived decay products deposited on a filter against time is presented, for any radiation equilibrium degree of the decay products. Deposition of the decay products is simulated by summing discrete samples every 1/10 min in the sampling time from 1 to 10 min. The concentration (activity) of the decay products is computed in one minute intervals in the range 1 - 100 min. The alpha concentration and the total activity of 218 Po + 214 Po produced are computed in the range 1 to 100 min as well. (author). 10 refs, 4 figs

  17. Food Management System--Daily Production Reports: General Description and Users Guide. Project SIMU-School: Dallas Component.

    Science.gov (United States)

    Cronshey, Raymond W.; Dunklau, M. William

    This booklet describes the Daily Production Reports subsystem of the School Food Management System, a computer program package developed as one part of a family of educational management systems. The Daily Production Reports system produces two major types of reports on a daily basis. Business Analysis Reports display all food service costs, as…

  18. Description of two new species of the Exocelina broschii-group from Papua New Guinea, with revision and key to all representatives of this species group (Coleoptera, Dytiscidae, Copelatinae).

    Science.gov (United States)

    Shaverdo, Helena; Sagata, Katayo; Balke, Michael

    2016-01-01

    Two new species of Exocelina Broun, 1886 from Papua New Guinea are described herein: Exocelina mondmillensis sp. n. and Exocelina pseudomarinae sp. n. They are placed into the Exocelina broschii-group based on the shovel/fork-like ventral sclerites of their median lobe. While the former has rather distinct combination of the morphological characters (inconspicuous dorsal punctation, thin apex of the median lobe and ventral sclerite of the median lobe with two tips of different length), the latter is very similar to already described species Exocelina marinae (Shaverdo, Sagata & Balke, 2005). All described species of the group are revised and a key to their identification is provided. Important diagnostic characters (habitus, color, protarsomeres 4-5, median lobes, and parameres) are illustrated. Data on the distribution of all species of the group are given showing that its representatives occur only in Papua New Guinea and most of them are widely distributed in it central part.

  19. Presence of ESBL/AmpC-producing Escherichia coli in the broiler production pyramid: a descriptive study.

    Directory of Open Access Journals (Sweden)

    Cindy M Dierikx

    Full Text Available Broilers and broiler meat products are highly contaminated with extended spectrum beta-lactamase (ESBL or plasmid-mediated AmpC beta-lactamase producing Escherichia coli and are considered to be a source for human infections. Both horizontal and vertical transmission might play a role in the presence of these strains in broilers. As not much is known about the presence of these strains in the whole production pyramid, the epidemiology of ESBL/AmpC-producing E. coli in the Dutch broiler production pyramid was examined. Cloacal swabs of Grandparent stock (GPS birds (one-/two-days (breed A and B, 18 and 31 weeks old (breed A, one-day old Parent stock birds (breed A and B and broiler chickens of increasing age (breed A were selectively cultured to detect ESBL/AmpC-producing isolates. ESBL/AmpC-producing isolates were found at all levels in the broiler production pyramid in both broiler breeds examined. Prevalence was already relatively high at the top of the broiler production pyramid. At broiler farms ESBL/AmpC producing E. coli were still present in the environment of the poultry house after cleaning and disinfection. Feed samples taken in the poultry house also became contaminated with ESBL/AmpC producing E. coli after one or more production weeks. The prevalence of ESBL/AmpC-positive birds at broiler farms increased within the first week from 0-24% to 96-100% independent of the use of antibiotics and stayed 100% until slaughter. In GPS breed A, prevalence at 2 days, 18 weeks and 31 weeks stayed below 50% except when beta-lactam antibiotics were administered. In that case prevalence increased to 100%. Interventions minimizing ESBL/AmpC contamination in broilers should focus on preventing horizontal and vertical spread, especially in relation to broiler production farms.

  20. Environmental site description for a Uranium Atomic Vapor Laser Isotope Separation (U-AVLIS) production plant at the Oak Ridge Gaseous Diffusion Plant Site

    Energy Technology Data Exchange (ETDEWEB)

    1991-09-01

    In January 1990, the Secretary of Energy approved a plan for the demonstration and deployment of the Uranium Atomic Vapor Laser Isotope Separation (U-AVLIS) technology, with the near-term goal to provide the necessary information to make a deployment decision by November 1992. The U-AVLIS process is based on electrostatic extraction of photoionized U-235 atoms from an atomic vapor stream created by electron-beam vaporization of uranium metal alloy. A programmatic document for use in screening DOE sites to locate the U-AVLIS production plant was developed and implemented in two parts (Wolsko et al. 1991). The first part consisted of a series of screening analyses, based on exclusionary and other criteria, that identified a reasonable number of candidate sites. These sites were then subjected to a more rigorous and detailed comparative analysis for the purpose of developing a short list of reasonable alternative sites for later environmental examination. This environmental site description (ESD) provides a detailed description of the ORGDP site and vicinity suitable for use in an environmental impact statement (EIS). The report is based on existing literature, data collected at the site, and information collected by Argonne National Laboratory (ANL) staff during a site visit. The organization of the ESD is as follows. Topics addressed in Sec. 2 include a general site description and the disciplines of geology, water resources, biotic resources, air resources, noise, cultural resources, land use, socioeconomics, and waste management. Identification of any additional data that would be required for an EIS is presented in Sec. 3. Following the site description and additional data requirements, Sec. 4 provides a short, qualitative assessment of potential environmental issues. 37 refs., 20 figs., 18 tabs.

  1. Environmental site description for a Uranium Atomic Vapor Laser Isotope Separation (U-AVLIS) production plant at the Oak Ridge Gaseous Diffusion Plant Site

    International Nuclear Information System (INIS)

    1991-09-01

    In January 1990, the Secretary of Energy approved a plan for the demonstration and deployment of the Uranium Atomic Vapor Laser Isotope Separation (U-AVLIS) technology, with the near-term goal to provide the necessary information to make a deployment decision by November 1992. The U-AVLIS process is based on electrostatic extraction of photoionized U-235 atoms from an atomic vapor stream created by electron-beam vaporization of uranium metal alloy. A programmatic document for use in screening DOE sites to locate the U-AVLIS production plant was developed and implemented in two parts (Wolsko et al. 1991). The first part consisted of a series of screening analyses, based on exclusionary and other criteria, that identified a reasonable number of candidate sites. These sites were then subjected to a more rigorous and detailed comparative analysis for the purpose of developing a short list of reasonable alternative sites for later environmental examination. This environmental site description (ESD) provides a detailed description of the ORGDP site and vicinity suitable for use in an environmental impact statement (EIS). The report is based on existing literature, data collected at the site, and information collected by Argonne National Laboratory (ANL) staff during a site visit. The organization of the ESD is as follows. Topics addressed in Sec. 2 include a general site description and the disciplines of geology, water resources, biotic resources, air resources, noise, cultural resources, land use, socioeconomics, and waste management. Identification of any additional data that would be required for an EIS is presented in Sec. 3. Following the site description and additional data requirements, Sec. 4 provides a short, qualitative assessment of potential environmental issues. 37 refs., 20 figs., 18 tabs

  2. Description of Ethical Bio-Technology Assessment Tools for Agriculture and Food Production. Interim Report Ethical Bio-TA Tools

    NARCIS (Netherlands)

    Beekman, V.

    2004-01-01

    The objective of 'Ethical Bio-TA Tools' project is to develop and improve tools for the ethical assessment of new technologies in agriculture and food production in general and modern biotechnologies in particular. The developed tools need to be designed for various purposes and contexts. They

  3. Presence of ESBL/AmpC-producing Escherichia coli in the broiler production pyramid: a descriptive study.

    NARCIS (Netherlands)

    Dierikx, C.M.; Goot, van der J.A.; Smith, H.E.; Kant, A.; Mevius, D.J.

    2013-01-01

    Broilers and broiler meat products are highly contaminated with extended spectrum beta-lactamase (ESBL) or plasmid-mediated AmpC beta-lactamase producing Escherichia coli and are considered to be a source for human infections. Both horizontal and vertical transmission might play a role in the

  4. 40 CFR Appendix D to Subpart A of... - Harmonized Tariff Schedule Description of Products That May Contain Controlled Substances in...

    Science.gov (United States)

    2010-07-01

    ... Dehumidifiers (other than those under 8415 or 8424 classified as “machines and mechanical appliances having... motors), coatings or cleaning fluids for aircraft maintenance, mold release agents (e.g. for production... oils or their fractions of heading No. 15.16. 2106.90 Food preparations not elsewhere specified or...

  5. Product operator descriptions of INEPT and RINEPT NMR spectroscopies for ISn ( I=1/2, S=3/2) spin systems

    Science.gov (United States)

    Tokatlı, Ahmet; Gençten, Azmi; Şahin, Mükerrem; Tezel, Özden; Bahçeli, Semiha

    2004-07-01

    The product operator descriptions of INEPT and reverse INEPT (RINEPT) NMR experiments are introduced for weakly coupled ISn ( I=1/2, S=3/2 with n=1,2,3) spin systems. Explicit expressions for polarization transfer from spin-3/2 quadrupolar nuclei to spin-1/2 nuclei (and reversed polarization transfer) are given in detail by using the evolutions of product operators under the spin-spin coupling Hamiltonian. The results calculated for the intensities and positions of the observable signals are simulated in the molecules containning the 119Sn ( I=1/2) and 35Cl ( S=3/2) nuclei at the coupling constant of JSn-Cl=375 Hz by using the Maple programme on computer.

  6. Environmental site description for a Uranium Atomic Vapor Laser Isotope Separation (U-AVLIS) production plant at the Portsmouth Gaseous Diffusion Plant site

    International Nuclear Information System (INIS)

    Marmer, G.J.; Dunn, C.P.; Filley, T.H.; Moeller, K.L.; Pfingston, J.M.; Policastro, A.J.; Cleland, J.H.

    1991-09-01

    Uranium enrichment in the United States has utilized a diffusion process to preferentially enrich the U-235 isotope in the uranium product. In the 1970s, the US Department of Energy (DOE) began investigating more efficient and cost-effective enrichment technologies. In January 1990, the Secretary of Energy approved a plan for the demonstration and deployment of the Uranium Atomic Vapor Laser isotope Separation (U-AVLIS) technology with the near-term goal to provide the necessary information to make a deployment decision by November 1992. Initial facility operation is anticipated for 1999. A programmatic document for use in screening DOE sites to locate a U-AVLIS production plant was developed and implemented in two parts. The first part consisted of a series of screening analyses, based on exclusionary and other criteria, that identified a reasonable number of candidate sites. The final evaluation, which included sensitivity studies, identified the Oak Ridge Gaseous Diffusion Plant (ORGDP) site, the Paducah Gaseous Diffusion Plant (PGDP) site, and the Portsmouth Gaseous Diffusion Plant (PORTS) site as having significant advantages over the other sites considered. This environmental site description (ESD) provides a detailed description of the PORTS site and vicinity suitable for use in an environmental impact statement (EIS). This report is based on existing literature, data collected at the site, and information collected by Argonne National Laboratory (ANL) staff during site visits. The organization of the ESD is as follows. Topics addressed in Sec. 2 include a general site description and the disciplines of geology, water resources, biotic resources, air resources, noise, cultural resources, land use. Socioeconomics, and waste management. Identification of any additional data that would be required for an EIS is presented in Sec. 3

  7. Environmental site description for a Uranium Atomic Vapor Laser Isotope Separation (U-AVLIS) production plant at the Portsmouth Gaseous Diffusion Plant site

    Energy Technology Data Exchange (ETDEWEB)

    Marmer, G.J.; Dunn, C.P.; Filley, T.H.; Moeller, K.L.; Pfingston, J.M.; Policastro, A.J.; Cleland, J.H.

    1991-09-01

    Uranium enrichment in the United States has utilized a diffusion process to preferentially enrich the U-235 isotope in the uranium product. In the 1970s, the US Department of Energy (DOE) began investigating more efficient and cost-effective enrichment technologies. In January 1990, the Secretary of Energy approved a plan for the demonstration and deployment of the Uranium Atomic Vapor Laser isotope Separation (U-AVLIS) technology with the near-term goal to provide the necessary information to make a deployment decision by November 1992. Initial facility operation is anticipated for 1999. A programmatic document for use in screening DOE sites to locate a U-AVLIS production plant was developed and implemented in two parts. The first part consisted of a series of screening analyses, based on exclusionary and other criteria, that identified a reasonable number of candidate sites. The final evaluation, which included sensitivity studies, identified the Oak Ridge Gaseous Diffusion Plant (ORGDP) site, the Paducah Gaseous Diffusion Plant (PGDP) site, and the Portsmouth Gaseous Diffusion Plant (PORTS) site as having significant advantages over the other sites considered. This environmental site description (ESD) provides a detailed description of the PORTS site and vicinity suitable for use in an environmental impact statement (EIS). This report is based on existing literature, data collected at the site, and information collected by Argonne National Laboratory (ANL) staff during site visits. The organization of the ESD is as follows. Topics addressed in Sec. 2 include a general site description and the disciplines of geology, water resources, biotic resources, air resources, noise, cultural resources, land use. Socioeconomics, and waste management. Identification of any additional data that would be required for an EIS is presented in Sec. 3.

  8. Environmental site description for a Uranium Atomic Vapor Laser Isotope Separation (U-AVLIS) production plant at the Paducah Gaseous Diffusion Plant site

    Energy Technology Data Exchange (ETDEWEB)

    Marmer, G.J.; Dunn, C.P.; Moeller, K.L.; Pfingston, J.M.; Policastro, A.J.; Yuen, C.R.; Cleland, J.H. (ed.)

    1991-09-01

    Uranium enrichment in the United States has utilized a diffusion process to preferentially enrich the U-235 isotope in the uranium product. The U-AVLIS process is based on electrostatic extraction of photoionized U-235 atoms from an atomic vapor stream created by electron-beam vaporization of uranium metal alloy. The U-235 atoms are ionized when precisely tuned laser light -- of appropriate power, spectral, and temporal characteristics -- illuminates the uranium vapor and selectively photoionizes the U-235 isotope. A programmatic document for use in screening DOE site to locate a U-AVLIS production plant was developed and implemented in two parts. The first part consisted of a series of screening analyses, based on exclusionary and other criteria, that identified a reasonable number of candidate sites. These sites were subjected to a more rigorous and detailed comparative analysis for the purpose of developing a short list of reasonable alternative sites for later environmental examination. This environmental site description (ESD) provides a detailed description of the PGDP site and vicinity suitable for use in an environmental impact statement (EIS). The report is based on existing literature, data collected at the site, and information collected by Argonne National Laboratory (ANL) staff during a site visit. 65 refs., 15 tabs.

  9. Environmental site description for a Uranium Atomic Vapor Laser Isotope Separation (U-AVLIS) production plant at the Paducah Gaseous Diffusion Plant site

    International Nuclear Information System (INIS)

    Marmer, G.J.; Dunn, C.P.; Moeller, K.L.; Pfingston, J.M.; Policastro, A.J.; Yuen, C.R.; Cleland, J.H.

    1991-09-01

    Uranium enrichment in the United States has utilized a diffusion process to preferentially enrich the U-235 isotope in the uranium product. The U-AVLIS process is based on electrostatic extraction of photoionized U-235 atoms from an atomic vapor stream created by electron-beam vaporization of uranium metal alloy. The U-235 atoms are ionized when precisely tuned laser light -- of appropriate power, spectral, and temporal characteristics -- illuminates the uranium vapor and selectively photoionizes the U-235 isotope. A programmatic document for use in screening DOE site to locate a U-AVLIS production plant was developed and implemented in two parts. The first part consisted of a series of screening analyses, based on exclusionary and other criteria, that identified a reasonable number of candidate sites. These sites were subjected to a more rigorous and detailed comparative analysis for the purpose of developing a short list of reasonable alternative sites for later environmental examination. This environmental site description (ESD) provides a detailed description of the PGDP site and vicinity suitable for use in an environmental impact statement (EIS). The report is based on existing literature, data collected at the site, and information collected by Argonne National Laboratory (ANL) staff during a site visit. 65 refs., 15 tabs

  10. The food choice kaleidoscope. A framework for structured description of product, place and person as sources of variation in food choices.

    Science.gov (United States)

    Jaeger, Sara R; Bava, Christina M; Worch, Thierry; Dawson, John; Marshall, David W

    2011-04-01

    Despite a wide range of research approaches already being used to study eating and drinking, this complex aspect of human activity lacks conceptualisation and methodology for structured description of food choices. This paper introduces a metaphoric framework--the food choice kaleidoscope--as an approach to such inquiry. It conceptualises individual food choice events (or eating occasions) as being shaped by three main factors--product, person and place--and provides a descriptive approach through which patterns and variability in food choice events can be observed. The factors can be studied separately or in combination to reveal the joint influence of product, place and/or person factors. The approach is 'data hungry' and requires information about large numbers of eating occasions obtained for a variety of foods/beverage in a variety of situations. Using information about ∼5800 eating occasions obtained from 25 New Zealand women who self-completed 24-h recall diaries, the kaleidoscopic approach is illustrated. The data are analysed in relation to 30 food/beverage categories and 37 contextual (or 'place') variables, and at the level of individual participants. Results are presented that document: product-to-product variability in who eats/drinks what and where/how it is consumed; place-to-place variation in what is consumed and by whom; and person-to-person variability in what is consumed and where/how it is consumed. The most significant insight to emerge is the considerable heterogeneity that is hidden beneath the average patterns, and that average values may be inappropriate/irrelevant for this type of data. Copyright © 2011 Elsevier Ltd. All rights reserved.

  11. A description of the lactic acid bacteria microbiota associated with the production of traditional fermented vegetables in Vietnam.

    Science.gov (United States)

    Nguyen, Doan Thi Lam; Van Hoorde, Koenraad; Cnockaert, Margo; De Brandt, Evie; Aerts, Maarten; Binh Thanh, Le; Vandamme, Peter

    2013-04-15

    An important part of the daily nourishment in Vietnam constitutes of fermented vegetables. Bacteria and especially lactic acid bacteria play a central role in the production of many fermented vegetables. The current study was conducted to investigate the diversity of native lactic acid bacteria (LAB) populations in 'dua muoi' (mustard and beet fermentation) and 'ca muoi' (eggplant fermentation), three types of popular traditional fermented vegetables of Vietnamese origin. To this end a polyphasic approach combining matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) and pheS gene sequence analysis was used. In addition, denaturing gradient gel electrophoresis was performed as a culture-independent method to complement the observed culturable diversity data. A total of 881 LAB isolates were recovered from 21 different samples. Predominant LAB associated with 'dua muoi' and 'ca muoi' were identified as Lactobacillus fermentum (56.6%), Lactobacillus pentosus (24.4%) and Lactobacillus plantarum (17.1%). Less abundant species were Pediococcus pentosaceus (1.0%) and Lactobacillus brevis (0.5%). Species present less than 0.1% included Lactobacillus paracasei, Lactobacillus pantheris and Pediococcus acidilactici. In contrast to fermented mustard and beet with the highest prevalence of L. fermentum, the species most recovered from fermented eggplant samples was L. pentosus. In addition, an important degree of genetic variability within the different predominant species was observed and strain dependency correlating with the type of fermented vegetable or location of production could be demonstrated using multivariate statistics. This research gives an extensive and detailed inventory of the LAB diversity associated with the production of diverse Vietnamese fermented vegetables and demonstrates the influence of type of raw material and/or production location and conditions on this diversity. Copyright © 2013 Elsevier B.V. All rights

  12. Dimensions of lay health worker programmes: results of a scoping study and production of a descriptive framework.

    Science.gov (United States)

    South, Jane; Meah, Angela; Bagnall, Anne-Marie; Jones, Rebecca

    2013-03-01

    Approaches that engage and support lay health workers in the delivery of health improvement activities have been widely applied across different health issues and populations. The lack of a common terminology, inconsistency in the use of role descriptors and poor indexing of lay health worker roles are all barriers to the development of a shared evidence base for lay health worker interventions. The aim of the paper is to report results from a scoping study of approaches to involve lay people in public health roles and to present a framework for categorisation of the different dimensions of lay health worker programmes. Our scoping study comprised a systematic scoping review to map the literature on lay health worker interventions and to identify role dimensions and common models. The review, which was limited to interventions relevant to UK public health priorities, covered a total of 224 publications. The scoping study also drew on experiential evidence from UK practice. Research-based and practice-based evidence confirmed the variety of role descriptors in use and the complexity of role dimensions. Five common models that define the primary role of the lay health worker were identified from the literature. A framework was later developed that grouped features of lay health worker programmes into four dimensions: intervention, role, professional support/service and the community. More account needs to be taken of the variations that occur between lay health worker programmes. This framework, with the mapping of key categories of difference, may enable better description of lay health worker programmes, which will in turn assist in building a shared evidence base. More research is needed to examine the transferability of the framework within different contexts.

  13. Systematic revision of the Potamotrygon motoro (Müller & Henle, 1841 species complex in the Paraná-Paraguay basin, with description of two new ocellated species (Chondrichthyes: Myliobatiformes: Potamotrygonidae

    Directory of Open Access Journals (Sweden)

    Thiago Silva Loboda

    Full Text Available A systematic revision of the Potamotrygon motoro (Müller & Henle, 1841 species complex in the Paraná-Paraguay basin based on morphological characters was undertaken. Morphological systems analyzed include external morphology, coloration, dermal denticles, and spines, canals of the ventral lateral-line system, and skeletal components. Potamotrygon motoro is widely distributed in the Paraná-Paraguay basin and some of its diagnostic characters are: ocelli present on dorsal disc tricolored, well-defined and evenly distributed, with diameter similar or greater than eye-length; ventral coloration with relatively large whitish central region, with gray or brown area predominant on outer ventral disc margins; dermal denticles well-developed and star-shaped over central disc; labial grooves absent; monognathic heterodonty present in upper and lower jaws of adults. Potamotrygon pauckei Castex, 1963 and Potamotrygon labradori Castex, Maciel & Achenbach, 1963, are synonymized with P. motoro; Potamotrygon alba Castex, 1963, is a nomen dubium in accordance with previous authors. Additionally, two new ocellated species of Potamotrygon from the Paraná-Paraguay basin are described: Potamotrygon pantanensis, sp. nov. and Potamotrygon amandae, sp. nov. These are described and compared with P. motoro and other congeners. Potamotrygon pantanensis, sp. nov. is described from the northern Pantanal region; Potamotrygon amandae, sp. nov. is widespread in the Paraná-Paraguay basin.

  14. 76 FR 2291 - TRICARE Reimbursement Revisions

    Science.gov (United States)

    2011-01-13

    ... rule revises the regulation by removing references to specific numeric Diagnosis Related Group (DRG... following methods: Federal eRulemaking Portal: http://www.regulations.gov . Follow the instructions for... descriptions became obsolete, so we are removing the numeric references in the regulation and utilizing only...

  15. A revision of Jatropha (Euphorbiaceae) in Malesia

    NARCIS (Netherlands)

    Welzen, van P.C.; Sweet, F.S.T.; Fernández-Casas, F.J.

    2017-01-01

    Jatropha, a widespread, species rich genus, ranges from the Americas and Caribbean to Africa and India. In Malesia five species occur, all of which were introduced and originated in Central and South America. The five species are revised and an identification key, nomenclature, descriptions,

  16. WRAP Module 1 data management system (DMS) software design description (SDD)

    International Nuclear Information System (INIS)

    Weidert, J.R.

    1996-01-01

    Revision 2 of the Waste Receiving and Processing (WRAP) Module 1 Data Management System (DMS) Preliminary Software Design Description (PSDD) provides a high-level design description of the system. The WRAP 1 DMS is required to collect, store, and report data related to certification, tracking, packaging, repackaging, processing, and shipment of waste processed or stored at the WRAP 1 facility. The WRAP 1 DMS SDD is used as the primary medium for communication software design information. This release provides design descriptions for the following process modules produced under Phase 1 of the development effort: Receiving Drum or Box Containers Process Routing and Picklists; Waste Inventory by Location and/or Container Relationships; LLW Process Glovebox Facility Radiologic Material Inventory Check (partial); Shipping (partial production); Drum or Box NDE Operations; and Drum or Box NDA Operations Data Review (partial production). In addition, design descriptions are included for the following process modules scheduled for development under Phases 2 and 3: Activity Comment; LLW RWM Glovebox Sample Management; TRU Process Glovebox; TRU RWM Glovebox; and TRUPACT Processing. Detailed design descriptions for Reports and Facility Metrics have also been provided for in Revision 2 of this document

  17. Descriptive statistics.

    Science.gov (United States)

    Nick, Todd G

    2007-01-01

    Statistics is defined by the Medical Subject Headings (MeSH) thesaurus as the science and art of collecting, summarizing, and analyzing data that are subject to random variation. The two broad categories of summarizing and analyzing data are referred to as descriptive and inferential statistics. This chapter considers the science and art of summarizing data where descriptive statistics and graphics are used to display data. In this chapter, we discuss the fundamentals of descriptive statistics, including describing qualitative and quantitative variables. For describing quantitative variables, measures of location and spread, for example the standard deviation, are presented along with graphical presentations. We also discuss distributions of statistics, for example the variance, as well as the use of transformations. The concepts in this chapter are useful for uncovering patterns within the data and for effectively presenting the results of a project.

  18. How consumers are affected by product descriptions in online shopping: Event-related potentials evidence of the attribute framing effect.

    Science.gov (United States)

    Jin, Jia; Zhang, Wuke; Chen, Mingliang

    2017-12-01

    Due to the limitations of the human ability to process information, e-consumers' decisions are likely to be influenced by various cognitive biases, such as the attribute framing effect. This effect has been well studied by numerous scholars; however, the associated underlying neural mechanisms with a critical temporal resolution have not been revealed. Thus, this study applies the measurement of event-related potentials (ERPs) to directly examine the role of attribute framing in information processing and decision-making in online shopping. The behavioral results showed that participants demonstrated a higher purchase intention with a shorter reaction time under a positive framing condition compared to participants under a negative framing condition. Compared with positive framing messages, the results of ERPs indicated that negative framing messages attracted more attention resources at the early stage of rapid automatic processing (larger P2 amplitude) and resulted in greater cognitive conflict and decision difficulty (larger P2-N2 complex). Moreover, compared with negative messages, positive framing messages allowed consumers to perceive a better future performance of products and classify these products as a categorization of higher evaluation (larger LPP amplitude) at the late cognitive processing stage of evaluation. Based on these results, we provide evidence for a better understanding of how different attribute framing messages are processed and ultimately lead to the framing effect. Copyright © 2017 Elsevier Ireland Ltd and Japan Neuroscience Society. All rights reserved.

  19. Loosening After Acetabular Revision

    DEFF Research Database (Denmark)

    Beckmann, Nicholas A.; Weiss, Stefan; Klotz, Matthias C.M.

    2014-01-01

    The best method of revision acetabular arthroplasty remains unclear. Consequently, we reviewed the literature on the treatment of revision acetabular arthroplasty using revision rings (1541 cases; mean follow-up (FU) 5.7 years) and Trabecular Metal, or TM, implants (1959 cases; mean FU 3.7 years...

  20. Exclusive description of multiple production on nuclei in the additive quark model. Multiplicity distributions in interactions with heavy nuclei

    International Nuclear Information System (INIS)

    Levchenko, B.B.; Nikolaev, N.N.

    1985-01-01

    In the framework of the additive quark model of multiple production on nuclei we calculate the multiplicity distributions of secondary particles and the correlations between secondary particles in πA and pA interactions with heavy nuclei. We show that intranuclear cascades are responsible for up to 50% of the nuclear increase of the multiplicity of fast particles. We analyze the sensitivity of the multiplicities and their correlations to the choice of the quark-hadronization function. We show that with good accuracy the yield of relativistic secondary particles from heavy and intermediate nuclei depends only on the number N/sub p/ of protons knocked out of the nucleus, and not on the mass number of the nucleus (N/sub p/ scaling)

  1. De Novo Transcriptomic Analysis of an Oleaginous Microalga: Pathway Description and Gene Discovery for Production of Next-Generation Biofuels

    Science.gov (United States)

    Wan, LingLin; Han, Juan; Sang, Min; Li, AiFen; Wu, Hong; Yin, ShunJi; Zhang, ChengWu

    2012-01-01

    Background Eustigmatos cf. polyphem is a yellow-green unicellular soil microalga belonging to the eustimatophyte with high biomass and considerable production of triacylglycerols (TAGs) for biofuels, which is thus referred to as an oleaginous microalga. The paucity of microalgae genome sequences, however, limits development of gene-based biofuel feedstock optimization studies. Here we describe the sequencing and de novo transcriptome assembly for a non-model microalgae species, E. cf. polyphem, and identify pathways and genes of importance related to biofuel production. Results We performed the de novo assembly of E. cf. polyphem transcriptome using Illumina paired-end sequencing technology. In a single run, we produced 29,199,432 sequencing reads corresponding to 2.33 Gb total nucleotides. These reads were assembled into 75,632 unigenes with a mean size of 503 bp and an N50 of 663 bp, ranging from 100 bp to >3,000 bp. Assembled unigenes were subjected to BLAST similarity searches and annotated with Gene Ontology (GO) and Kyoto Encyclopedia of Genes and Genomes (KEGG) orthology identifiers. These analyses identified the majority of carbohydrate, fatty acids, TAG and carotenoids biosynthesis and catabolism pathways in E. cf. polyphem. Conclusions Our data provides the construction of metabolic pathways involved in the biosynthesis and catabolism of carbohydrate, fatty acids, TAG and carotenoids in E. cf. polyphem and provides a foundation for the molecular genetics and functional genomics required to direct metabolic engineering efforts that seek to enhance the quantity and character of microalgae-based biofuel feedstock. PMID:22536352

  2. De novo transcriptomic analysis of an oleaginous microalga: pathway description and gene discovery for production of next-generation biofuels.

    Directory of Open Access Journals (Sweden)

    LingLin Wan

    Full Text Available Eustigmatos cf. polyphem is a yellow-green unicellular soil microalga belonging to the eustimatophyte with high biomass and considerable production of triacylglycerols (TAGs for biofuels, which is thus referred to as an oleaginous microalga. The paucity of microalgae genome sequences, however, limits development of gene-based biofuel feedstock optimization studies. Here we describe the sequencing and de novo transcriptome assembly for a non-model microalgae species, E. cf. polyphem, and identify pathways and genes of importance related to biofuel production.We performed the de novo assembly of E. cf. polyphem transcriptome using Illumina paired-end sequencing technology. In a single run, we produced 29,199,432 sequencing reads corresponding to 2.33 Gb total nucleotides. These reads were assembled into 75,632 unigenes with a mean size of 503 bp and an N50 of 663 bp, ranging from 100 bp to >3,000 bp. Assembled unigenes were subjected to BLAST similarity searches and annotated with Gene Ontology (GO and Kyoto Encyclopedia of Genes and Genomes (KEGG orthology identifiers. These analyses identified the majority of carbohydrate, fatty acids, TAG and carotenoids biosynthesis and catabolism pathways in E. cf. polyphem.Our data provides the construction of metabolic pathways involved in the biosynthesis and catabolism of carbohydrate, fatty acids, TAG and carotenoids in E. cf. polyphem and provides a foundation for the molecular genetics and functional genomics required to direct metabolic engineering efforts that seek to enhance the quantity and character of microalgae-based biofuel feedstock.

  3. Revision of a nonunited subtrochanteric femoral fracture around a failed intramedullary nail with the use of RIA products, BMP-7 and hydroxyapatite: a case report

    Directory of Open Access Journals (Sweden)

    Tsiridis Eleftherios

    2011-03-01

    Full Text Available Abstract Introduction Femoral subtrochanteric fractures are commonly treated using intramedullary devices. Failure of the implant and subsequent nonunion is still an issue, however, and limited evidence exists regarding the most appropriate treatment. Case presentation We report the case of an 80-year-old Caucasian woman with a subtrochanteric fracture originally treated using a trochanteric gamma nail which failed, resulting in a nonunion and fracture of its proximal end. The nonunion was revised with the removal of the broken trochanteric gamma nail, application of a condylar blade plate, ipsilateral Reamer/Irrigator/Aspirator autografting, recombinant human bone morphogenetic protein-7 and injectable hydroxyapatite cement. The fracture united fully at ten months following revision surgery, with no signs of femoral head avascular necrosis at 18-month follow-up. Conclusion The essential requirements for success when revising a nonunited fracture are to provide anatomical reduction, mechanical stability, bone defect augmentation and biological stimulation to achieve healing. Current advances in molecular biology, such as recombinant human bone morphogenetic protein-7, and biotechnology such as the Reamer/Irrigator/Aspirator system and hydroxyapatite injectable cement can improve patient outcomes over the use of our traditional revision techniques.

  4. A Revision of Lasionycta Aurivillius (Lepidoptera: Noctuidae for North America and notes on Eurasian species, with descriptions of 17 new species, 6 new subspecies, a new genus, and two new species of Tricholita Grote

    Directory of Open Access Journals (Sweden)

    Lars Crabo

    2009-12-01

    Full Text Available The North American species of Lasionycta Aurivillius are revised to include 43 species and 13 subspecies using traditional methods and mitochondrial cytochrome oxidase subunit 1 (CO1 DNA sequence (barcode analysis. Seven species-groups are recognized, and one group is further divided into seven sub-groups. Seventeen species and six subspecies of Lasionycta are described: L. anthracina Crabo & Lafontaine, L. benjamini medaminosa Crabo & Lafontaine, L. brunnea Crabo & Lafontaine, L. caesia Crabo & Lafontaine, L. carolynae Crabo, L. coracina Crabo & Lafontaine, L. fergusoni Crabo & Lafontaine, L. frigida Crabo & Lafontaine, L. gelida Crabo & Lafontaine, L. haida Crabo & Lafontaine, L. illima Crabo & Lafontaine, L. mono Crabo & Lafontaine, L. uniformis fusca Crabo & Lafontaine, L. uniformis handfieldi Crabo & Lafontaine, L. uniformis multicolor Crabo & Lafontaine, L. uniformis shasta Crabo & Lafontaine, L. perplexella Crabo & Lafontaine, L. pulverea Crabo & Lafontaine, L. sasquatch Crabo & Lafontaine, L. sierra Crabo & Lafontaine, L. silacea Crabo & Lafontaine, L. subalpina Crabo & Lafontaine, and L. subfuscula livida Crabo & Lafontaine. Lasionycta coloradensis (Richards, L. dolosaL. flanda (Barnes & Benjamin, (Smith, L. poca (Barnes & Benjamin, and L. subfumosa (Gibson are elevated to species. The following new synonyms are recognized: Scotogramma albinuda Smith (= Lasiestra phoca Möschler, Lasiestra klotsi Richards (= Scotogramma discolor Smith, Scotogramma infuscata Smith (= Mamestra promulsa Morrison, Lasionycta alberta Barnes & Benjamin and Anytus marloffi Smith (= Scotogramma perplexa Smith, Scotogramma sedilis Smith (= Scotogramma subfuscula Grote, Mamestra rainieri Smith (= Mamestra mutilata Smith, Anarta zemblica Hampson (= Anarta staudingeri Aurivillius, and Anarta etacta Smith (= Mamestra arietis Grote. The Eurasian species are reviewed resulting in the following changes: Lasionhada proxima (Hübner, comb. rev., Eriopygodes imbecilla

  5. CANISTER HANDLING FACILITY DESCRIPTION DOCUMENT

    Energy Technology Data Exchange (ETDEWEB)

    J.F. Beesley

    2005-04-21

    The purpose of this facility description document (FDD) is to establish requirements and associated bases that drive the design of the Canister Handling Facility (CHF), which will allow the design effort to proceed to license application. This FDD will be revised at strategic points as the design matures. This FDD identifies the requirements and describes the facility design, as it currently exists, with emphasis on attributes of the design provided to meet the requirements. This FDD is an engineering tool for design control; accordingly, the primary audience and users are design engineers. This FDD is part of an iterative design process. It leads the design process with regard to the flowdown of upper tier requirements onto the facility. Knowledge of these requirements is essential in performing the design process. The FDD follows the design with regard to the description of the facility. The description provided in this FDD reflects the current results of the design process.

  6. CANISTER HANDLING FACILITY DESCRIPTION DOCUMENT

    International Nuclear Information System (INIS)

    Beesley. J.F.

    2005-01-01

    The purpose of this facility description document (FDD) is to establish requirements and associated bases that drive the design of the Canister Handling Facility (CHF), which will allow the design effort to proceed to license application. This FDD will be revised at strategic points as the design matures. This FDD identifies the requirements and describes the facility design, as it currently exists, with emphasis on attributes of the design provided to meet the requirements. This FDD is an engineering tool for design control; accordingly, the primary audience and users are design engineers. This FDD is part of an iterative design process. It leads the design process with regard to the flowdown of upper tier requirements onto the facility. Knowledge of these requirements is essential in performing the design process. The FDD follows the design with regard to the description of the facility. The description provided in this FDD reflects the current results of the design process

  7. Fuel Handling Facility Description Document

    International Nuclear Information System (INIS)

    M.A. LaFountain

    2005-01-01

    The purpose of the facility description document (FDD) is to establish the requirements and their bases that drive the design of the Fuel Handling Facility (FHF) to allow the design effort to proceed to license application. This FDD is a living document that will be revised at strategic points as the design matures. It identifies the requirements and describes the facility design as it currently exists, with emphasis on design attributes provided to meet the requirements. This FDD was developed as an engineering tool for design control. Accordingly, the primary audience and users are design engineers. It leads the design process with regard to the flow down of upper tier requirements onto the facility. Knowledge of these requirements is essential to performing the design process. It trails the design with regard to the description of the facility. This description is a reflection of the results of the design process to date

  8. Descriptive data of JENDL-3.2

    Energy Technology Data Exchange (ETDEWEB)

    Shibata, Keiichi; Narita, Tsutomu [eds.; Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    1998-02-01

    The second revision of JENDL-3 (JENDL-3.2) was released in 1994. The library contains evaluated neutron nuclear data for 340 nuclides which are needed for the design of fission and fusion reactors and for shielding calculation. This report presents a brief description of the evaluation method which is given in the File-1 part of JENDL-3.2. (author)

  9. Descriptive data of JENDL-3.3

    Energy Technology Data Exchange (ETDEWEB)

    Shibata, Keiichi [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    2003-01-01

    The third revision of JENDL-3 (JENDL-3.3) was released in 2002. The library contains evaluated neutron nuclear data for 337 nuclides. This report presents a brief description of the evaluation method which is given in the MF1 part of JENDL-3.3. (author)

  10. WHO Working Group discussion on revision of the WHO recommendations for the production and control of poliomyelitis vaccines (oral): TRS Nos. 904 and 910. Report of Meeting held on 20-22 July 2010, Geneva, Switzerland.

    Science.gov (United States)

    Martin, Javier; Milne, Catherine; Minor, Philip; Chumakov, Konstantin; Baca-Estrada, Maria; Caruana, Jacqueline Fournier; Zhou, Tiequn

    2011-09-02

    Oral poliomyelitis vaccine (OPV) is a critical part of the polio eradication programme. A high number of doses are administered each year with an impact on billions of citizens worldwide. It is therefore essential that written standards concerning OPV are up to date and widely available. The World Health Organization (WHO) publishes technical guidance on the quality, safety and efficacy of vaccines intended to assist national regulatory authorities (NRAs), national control laboratories (NCLs) and manufacturers. As part of its programme, on 20-22 July 2010 WHO convened a working group meeting to initiate the revision of the WHO recommendations on the production and control of OPV as presently outlined in the Technical Reports Series (TRS) issues Nos. 904 and 910 [1,2]. The attendees included experts from academia, NRAs/NCLs and industry involved in the study, manufacture, and authorization and testing/release of OPV from countries around the world including representatives from China, the European Union, Indonesia, Japan, Mexico, and the USA. The objective was to review the state of knowledge concerning production and control of OPV, with a focus on neurovirulence testing, to determine how the existing guidelines should be updated and what recommendations should be made for the future. The outcomes of this meeting will be taken into consideration in future revision of the WHO TRS. Copyright © 2011. Published by Elsevier Ltd.. All rights reserved.

  11. Revised dietary guidelines for Koreans.

    Science.gov (United States)

    Jang, Young Ai; Lee, Haeng Shin; Kim, Bok Hee; Lee, Yoonna; Lee, Hae Jeung; Moon, Jae Jin; Kim, Cho-il

    2008-01-01

    With rapidly changing dietary environment, dietary guidelines for Koreans were revised and relevant action guides were developed. First, the Dietary Guidelines Advisory Committee was established with experts and government officials from the fields of nutrition, preventive medicine, health promotion, agriculture, education and environment. The Committee set dietary goals for Koreans aiming for a better nutrition state of all after a thorough review and analysis of recent information related to nutritional status and/or problems of Korean population, changes in food production/supply, disease pattern, health policy and agricultural policy. Then, the revised dietary guidelines were proposed to accomplish these goals in addition to 6 different sets of dietary action guides to accommodate specific nutrition and health problems of respective age groups. Subsequently, these guidelines and guides were subjected to the focus group review, consumer perception surveys, and a public hearing for general and professional comments. Lastly, the language was clarified in terms of public understanding and phraseology. The revised Dietary guidelines for Koreans are as follows: eat a variety of grains, vegetables, fruits, fish, meat, poultry and dairy products; choose salt-preserved foods less, and use less salt when you prepare foods; increase physical activity for a healthy weight, and balance what you eat with your activity; enjoy every meal, and do not skip breakfast; if you drink alcoholic beverages, do so in moderation; prepare foods properly, and order sensible amounts; enjoy our rice-based diet.

  12. Olkiluoto site description 2008. Part 1

    International Nuclear Information System (INIS)

    2009-04-01

    This third version of the Olkiluoto Site Report, produced by the OMTF (Olkiluoto Modelling Task Force), updates the Olkiluoto Site Report 2006 (Andersson et al. 2007) with the data and knowledge obtained up to December 2007. The main product of the modelling has been to develop an updated version of the descriptive model of the site (the Site Descriptive Model), i.e. a model describing the geometry, properties of the bedrock and the water and the associated interacting processes and mechanisms. The Site Descriptive Model is divided into six parts: the surface system, geology, rock mechanics, hydrogeology, hydrogeochemistry and migration, which are presented in individual chapters. Five separated models are presented: the geological, rock mechanics, hydrogeological, hydrogeochemical and migration models. The main advances since Site Report 2006 are: (1) The geological model has been revised according to new data and interpretations. This has improved the consistency between the locations of the deformation zones in the geological model and the hydraulic zones in the hydrogeological model, (2) New 3D seismic data have been incorporated within the geological model and an initial model for the eastern part of the Island is presented. Site-scale brittle deformation zones are extrapolated to intersect the surrounding regional lineaments, unless prohibited by direct observations to the contrary. The alteration model has been revised, showing a clear correspondence between the illitisation and the sitescale fault zones, (3) A first account of the development of the brittle deformation history of the site is provided, (4) A new geological DFN model has been developed, that considers mapped fracture traces from both the surface and the ONKALO, (5) A new stress state model and fracture and fracture zone properties are presented, (6) A new hydrogeological DFN model has been developed, (7) An updated site scale (EPM) flow model has been developed, (8) There has been an

  13. Bibliocable. Revised Edition.

    Science.gov (United States)

    Cable Television Information Center, Washington, DC.

    This selective, annotated bibliography is a revision of the original published in 1972 (ED 071 402). Some 104 books, articles, and reports included here deal with access, applications, franchising, regulation, technology, and other aspects of cable television. The listings are of two types in each category. First are revisions of the original…

  14. Irradiation performance of HTGR fertile fuel in HFIR target capsules HT-12 through HT-15. Part I. Experiment description and fission product behavior

    International Nuclear Information System (INIS)

    Kania, M.J.; Lindemer, T.B.; Morgan, M.T.; Robbins, J.M.

    1977-02-01

    Sixteen types of Biso-coated designs, on ThO 2 kernels, were irradiated in High Flux Isotope Reactor target capsules HT-12 through HT-15. The report addresses the description of the experiment and extensive postirradiation analyses and experiments to determine fertile-particle burnup, fuel coating failures, and fission product behavior. Several low-temperature isotropic (LTI) pyrocarbon coatings, which ''survived'' according to visual inspection, were shown to have developed permeability during irradiation. These particles were irradiated at temperatures approximately equal to 1250 0 C and to burnups equal to or greater than 8 percent fission per initial heavy-metal atom (FIMA). No evidence of permeability was found in similar particles irradiated at temperatures approximately equal to 1550 0 C and burnups approximately equal to 16 percent FIMA. Failures due to permeability were not detectable by visual inspection but required a more extensive investigation by the 1000 0 C gaseous chlorine leaching technique. Maximum particle surface operating temperatures were found to be approximately 300 0 C in excess of design limits of 900 0 C (low-temperature magazines) and 1250 0 C (high-temperature magazines). The extremes of high temperatures and fast neutron fluences up to 1.6 x 10 22 neutrons/cm 2 produced severe degradation and swelling of the Poco graphite magazines and sample holders

  15. The economic impact of revision otologic surgery.

    Science.gov (United States)

    Nadimi, Sahar; Leonetti, John P; Pontikis, George

    2016-03-01

    Revision otologic surgery places a significant economic burden on patients and the healthcare system. We conducted a retrospective chart analysis to estimate the economic impact of revision canal-wall-down (CWD) mastoidectomy. We reviewed the medical records of all 189 adults who had undergone CWD mastoidectomy performed by the senior author between June 2006 and August 2011 at Loyola University Medical Center in Maywood, Ill. Institutional charges and collections for all patients were extrapolated to estimate the overall healthcare cost of revision surgery in Illinois and at the national level. Of the 189 CWD mastoidectomies, 89 were primary and 100 were revision procedures. The total charge for the revision cases was $2,783,700, and the net reimbursement (collections) was $846,289 (30.4%). Using Illinois Hospital Association data, we estimated that reimbursement for 387 revision CWD mastoidectomies that had been performed in fiscal year 2011 was nearly $3.3 million. By extrapolating our data to the national level, we estimated that 9,214 patients underwent revision CWD mastoidectomy in the United States during 2011, which cost the national healthcare system roughly $76 million, not including lost wages and productivity. Known causes of failed CWD mastoidectomies that often result in revision surgery include an inadequate meatoplasty, a facial ridge that is too high, residual diseased air cells, and recurrent cholesteatoma. A better understanding of these factors can reduce the need for revision surgery, which could have a positive impact on the economic strain related to this procedure at the local, state, and national levels.

  16. Revision of Sciaphila (Triuridaceae in Taiwan

    Directory of Open Access Journals (Sweden)

    Tsung-Hsin Hsieh

    2003-12-01

    Full Text Available The genus Sciaphila (Triuridaceae is revised based on comparative morphological and palynological studies in Taiwan. Four species are recognized, i. E. Sciaphila arfakiana Becc., S. Maculata Miers, S. ramosa Fukuy. & T. Suzuki, and S. secundiflora Thwaites ex Benth. Sciaphila arfakiana and S. maculata are new record to Flora of Taiwan and S. secundiflora distributed in Kueishan Island is a new distribution. SEM micrographs of pollen grains, a key to species, species descriptions, and taxonomic notes are provided.

  17. Revising strategies for different text types

    OpenAIRE

    Roussey, JY; Piolat, A; Guercin, F

    1990-01-01

    Forty-eight children and forty-eight adults of contrasting degrees of expertise made a series of corrections in order to improve a text (narrative or description) in which three within-statement errors and three between-statement errors had been inserted. Subjects used a simplified word processor (SCRIPREV) which recorded all movements of linguistic units. The purpose of this research was to study revising strategies by examining the correction-sequencing procedures implemented by these subje...

  18. Contact activation: a revision.

    Science.gov (United States)

    Schmaier, A H

    1997-07-01

    In conclusion, a revised view of the contact system has been presented. This system has little to do with the initiation of hemostasis. Like lupus anticoagulants, deficiencies of contact proteins give prolonged APTTs but may be risk factors for thrombosis. BK from kininogens is a potent modulator of vascular biology inducing vasodilation, tissue plasminogen activator release, and prostacyclin liberation. Kininogens, themselves, are selective inhibitors of alpha-thrombin-induced platelet activation preventing alpha-thrombin from cleaving the cloned thrombin receptor after arginine41. Kininogens' alpha-thrombin inhibitory activity exists in intact kininogens, BK, and all of BK's breakdown products. HK also is the pivotal protein for contact protein assembly on endothelium. It is the receptor for prekallikrein which when bound to HK becomes activated to kallikrein by an endothelial cell enzyme system independent of activated forms of plasma factor XII. Prekallikrein activation on endothelial cells results in kinetically favorable single chain urokinase and plasminogen activation. Thus the "physiologic, negatively charged surface" for contact system activation is really the assembly of these proteins on cell membranes and activation by membrane-associated enzymes.

  19. 76 FR 67746 - Revised Guidance for Industry on Impurities: Residual Solvents in New Veterinary Medicinal...

    Science.gov (United States)

    2011-11-02

    ...] Revised Guidance for Industry on Impurities: Residual Solvents in New Veterinary Medicinal Products... Veterinary Medicinal Products, Active Substances and Excipients (Revision)'' VICH GL18(R). This revised guidance has been developed for veterinary use by the International Cooperation on Harmonisation of...

  20. Publishing and Revising Content

    Science.gov (United States)

    Editors and Webmasters can publish content without going through a workflow. Publishing times and dates can be set, and multiple pages can be published in bulk. Making an edit to published content created a revision.

  1. Letter of Map Revision

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The National Flood Hazard Layer (NFHL) data incorporates all Digital Flood Insurance Rate Map(DFIRM) databases published by FEMA, and any Letters Of Map Revision...

  2. Revision of the DELFIC Particle Activity Module

    Energy Technology Data Exchange (ETDEWEB)

    Hooper, David A [ORNL; Jodoin, Vincent J [ORNL

    2010-09-01

    The Defense Land Fallout Interpretive Code (DELFIC) was originally released in 1968 as a tool for modeling fallout patterns and for predicting exposure rates. Despite the continual advancement of knowledge of fission yields, decay behavior of fission products, and biological dosimetry, the decay data and logic of DELFIC have remained mostly unchanged since inception. Additionally, previous code revisions caused a loss of conservation of radioactive nuclides. In this report, a new revision of the decay database and the Particle Activity Module is introduced and explained. The database upgrades discussed are replacement of the fission yields with ENDF/B-VII data as formatted in the Oak Ridge Isotope Generation (ORIGEN) code, revised decay constants, revised exposure rate multipliers, revised decay modes and branching ratios, and revised boiling point data. Included decay logic upgrades represent a correction of a flaw in the treatment of the fission yields, extension of the logic to include more complex decay modes, conservation of nuclides (including stable nuclides) at all times, and conversion of key variables to double precision for nuclide conservation. Finally, recommended future work is discussed with an emphasis on completion of the overall radiation physics upgrade, particularly for dosimetry, induced activity, decay of the actinides, and fractionation.

  3. EFSA Panel on Plant Protection Products and their Residues (PPR); EFSA Scientific Opinion on the science behind the revision of the guidance document on dermal absorption

    DEFF Research Database (Denmark)

    Petersen, Annette

    will be finalised and published only after adoption and publication of this opinion. This opinion has been developed after a public consultation of EFSA on the current guidance document and an outsourced project carried out by the UK Chemicals Regulation Directorate (CRD, 2010). It is not intended...... that have an impact on absorption, a description of important elements in the design of experimental studies and an analysis of available data on dermal absorption of PPPs. The PPR Panel concludes that assessment of dermal absorption in the absence of specific studies can be performed based on default...

  4. Training of audio descriptors: the cinematographic aesthetics as basis for the learning of the audio description aesthetics – materials, methods and products

    Directory of Open Access Journals (Sweden)

    Soraya Ferreira Alves

    2016-12-01

    Full Text Available Audio description (AD, a resource used to make theater, cinema, TV, and visual works of art accessible to people with visual impairments, is slowly being implemented in Brazil and demanding qualified professionals. Based on this statement, this article reports the results of a research developed during post-doctoral studies. The study is dedicated to the confrontation of film aesthetics with audio description techniques to check how the knowledge of the former can contribute to audiodescritor training. Through action research, a short film adapted from a Mario de Andrade’s, a Brazilian writer, short story called O Peru de Natal (Christmas Turkey was produced. The film as well as its audio description were carried out involving students and teachers from the discipline Intersemiotic Translation at the State University of Ceará. Thus, we intended to suggest pedagogical procedures generated by the students experiences by evaluating their choices and their implications.

  5. The Brosimum allene: a structural revision.

    Science.gov (United States)

    Hu, Gaojie; Liu, Kai; Williams, Lawrence J

    2008-12-04

    Insight derived from a synthetic model, calculated (13)C NMR data, and comparison to experimental data indicate that the proposed allenic structure A, originally assigned to an isolate from Brosimum acutifolium Huber, should be revised to B, a natural product and nonallenic substance, mururin C.

  6. ELECTRICAL POWER SYSTEM DESCRIPTION DOCUMENT

    Energy Technology Data Exchange (ETDEWEB)

    M. Maniyar

    2004-06-22

    The purpose of this revision of the System Description Document (SDD) is to establish requirements that drive the design of the electrical power system and their bases to allow the design effort to proceed to License Application. This SDD is a living document that will be revised at strategic points as the design matures over time. This SDD identifies the requirements and describes the system design as they exist at this time, with emphasis on those attributes of the design provided to meet the requirements. This SDD has been developed to be an engineering tool for design control. Accordingly, the primary audience are design engineers. This type of SDD leads and follows the design process. It leads the design process with regard to the flow down of upper tier requirements onto the system. Knowledge of these requirements is essential to performing the design process. This SDD follows the design with regard to the description of the system. The description provided in the SDD is a reflection of the results of the design process to date. Functional and operational requirements applicable to this system are obtained from ''Project Functional and Operational Requirements'' (F&OR) (Siddoway, 2003). Other requirements to support the design process have been taken from higher level requirements documents such as ''Project Design Criteria Document'' (PDC) (Doraswamy 2004), the fire hazards analyses, and the preclosure safety analysis. The above mentioned low-level documents address ''Project Requirements Document'' (PRD) (Canori and Leitner 2003) requirements. This SDD includes several appendices with supporting information. Appendix B lists key system charts, diagrams, drawings, and lists; and Appendix C is a list of system procedures.

  7. ELECTRICAL SUPPORT SYSTEM DESCRIPTION DOCUMENT

    Energy Technology Data Exchange (ETDEWEB)

    S. Roy

    2004-06-24

    The purpose of this revision of the System Design Description (SDD) is to establish requirements that drive the design of the electrical support system and their bases to allow the design effort to proceed to License Application. This SDD is a living document that will be revised at strategic points as the design matures over time. This SDD identifies the requirements and describes the system design as they exist at this time, with emphasis on those attributes of the design provided to meet the requirements. This SDD has been developed to be an engineering tool for design control. Accordingly, the primary audience/users are design engineers. This type of SDD both ''leads'' and ''trails'' the design process. It leads the design process with regard to the flow down of upper tier requirements onto the system. Knowledge of these requirements is essential in performing the design process. The SDD trails the design with regard to the description of the system. The description provided in the SDD is a reflection of the results of the design process to date. Functional and operational requirements applicable to electrical support systems are obtained from the ''Project Functional and Operational Requirements'' (F&OR) (Siddoway 2003). Other requirements to support the design process have been taken from higher-level requirements documents such as the ''Project Design Criteria Document'' (PDC) (Doraswamy 2004), and fire hazards analyses. The above-mentioned low-level documents address ''Project Requirements Document'' (PRD) (Canon and Leitner 2003) requirements. This SDD contains several appendices that include supporting information. Appendix B lists key system charts, diagrams, drawings, and lists, and Appendix C includes a list of system procedures.

  8. ELECTRICAL SUPPORT SYSTEM DESCRIPTION DOCUMENT

    International Nuclear Information System (INIS)

    Roy, S.

    2004-01-01

    The purpose of this revision of the System Design Description (SDD) is to establish requirements that drive the design of the electrical support system and their bases to allow the design effort to proceed to License Application. This SDD is a living document that will be revised at strategic points as the design matures over time. This SDD identifies the requirements and describes the system design as they exist at this time, with emphasis on those attributes of the design provided to meet the requirements. This SDD has been developed to be an engineering tool for design control. Accordingly, the primary audience/users are design engineers. This type of SDD both ''leads'' and ''trails'' the design process. It leads the design process with regard to the flow down of upper tier requirements onto the system. Knowledge of these requirements is essential in performing the design process. The SDD trails the design with regard to the description of the system. The description provided in the SDD is a reflection of the results of the design process to date. Functional and operational requirements applicable to electrical support systems are obtained from the ''Project Functional and Operational Requirements'' (F andOR) (Siddoway 2003). Other requirements to support the design process have been taken from higher-level requirements documents such as the ''Project Design Criteria Document'' (PDC) (Doraswamy 2004), and fire hazards analyses. The above-mentioned low-level documents address ''Project Requirements Document'' (PRD) (Canon and Leitner 2003) requirements. This SDD contains several appendices that include supporting information. Appendix B lists key system charts, diagrams, drawings, and lists, and Appendix C includes a list of system procedures

  9. Acetabular Cup Revision.

    Science.gov (United States)

    Kim, Young-Ho

    2017-09-01

    The use of acetabular cup revision arthroplasty is on the rise as demands for total hip arthroplasty, improved life expectancies, and the need for individual activity increase. For an acetabular cup revision to be successful, the cup should gain stable fixation within the remaining supportive bone of the acetabulum. Since the patient's remaining supportive acetabular bone stock plays an important role in the success of revision, accurate classification of the degree of acetabular bone defect is necessary. The Paprosky classification system is most commonly used when determining the location and degree of acetabular bone loss. Common treatment options include: acetabular liner exchange, high hip center, oblong cup, trabecular metal cup with augment, bipolar cup, bulk structural graft, cemented cup, uncemented cup including jumbo cup, acetabular reinforcement device (cage), trabecular metal cup cage. The optimal treatment option is dependent upon the degree of the discontinuity, the amount of available bone stock and the likelihood of achieving stable fixation upon supportive host bone. To achieve successful acetabular cup revision, accurate evaluation of bone defect preoperatively and intraoperatively, proper choice of method of acetabular revision according to the evaluation of acetabular bone deficiency, proper technique to get primary stability of implant such as precise grafting technique, and stable fixation of implant are mandatory.

  10. Revision of the Afrotropical Mayrellinae (Cynipoidea, Liopteridae), with the first record of Paramblynotus from Madagascar

    Science.gov (United States)

    The genus Paramblynotus Cameron from the Afrotropical region is revised including the description of the following eight new species: Paramblynotus alexandriensis Buffington & van Noort sp. nov.; Paramblynotus bayangensis van Noort & Buffington sp. nov.; Paramblynotus behara van Noort & Buffington s...

  11. Freshwater planarians from Colombia. A revision of Fuhrmann’s types

    NARCIS (Netherlands)

    Ball, Ian R.

    1980-01-01

    The type material of Colombian species of freshwater triclads (Fuhrmann, 1914) is revised and the original descriptions corrected and amplified. Planaria polyorchis is conspecific with Dugesia festai (Borelli). Planaria longistriata is a typical Girardia species of the Dugesia (Girardia) tigrina

  12. CACA-2: revised version of CACA-a heavy isotope and fission-product concentration calculational code for experimental irradiation capsules

    International Nuclear Information System (INIS)

    Allen, E.J.

    1976-02-01

    A computer program is described which calculates nuclide concentration histories, power or neutron flux histories, burnups, and fission-product birthrates for fueled experimental capsules subjected to neutron irradiations. Seventeen heavy nuclides in the chain from 232 Th to 242 Pu and a user-specified number of fission products are treated. A fourth-order Runge-Kutta calculational method solves the differential equations for nuclide concentrations as a function of time. For a particular problem, a user-specified number of fuel regions may be treated. A fuel region is described by volume, length, and specific irradiation history. A number of initial fuel compositions may be specified for each fuel region. The irradiation history for each fuel region can be divided into time intervals, and a constant power density or a time-dependent neutron flux is specified for each time interval. Also, an independent cross-section set may be selected for each time interval in each irradiation history. The fission-product birthrates for the first composition of each fuel region are summed to give the total fission-product birthrates for the problem

  13. 9 CFR 108.6 - Revision of plot plans, blueprints, and legends.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Revision of plot plans, blueprints... FACILITY REQUIREMENTS FOR LICENSED ESTABLISHMENTS § 108.6 Revision of plot plans, blueprints, and legends... changes affecting the workflow are to be made. The licensee shall: (a) Prepare revised plot plans...

  14. Revision of the Genus Hybosorus Macleay (Coleoptera: Scarabaeidae, Hybosorinae)

    NARCIS (Netherlands)

    Kuijten, P.J.

    1983-01-01

    A taxonomic revision of the scarabaeoid genus Hybosorus is given, including descriptions, nomenclatorial notes, figures of genital apparatus and other relevant parts, a key, and notes on distribution and bionomics. Lectotypes are designated for Hybosorus carolinus LeConte, H. crassus Klug, H.

  15. A revision of Beilschmiedia (Lauraceae) of Peninsular Malaysia

    NARCIS (Netherlands)

    Kok, de R.P.J.

    2016-01-01

    A revision of the Peninsular Malaysian species of Beilschmiedia (Lauraceae) is presented with a summary of the taxonomic history of the group, key, full descriptions, distribution maps, conservation assessments, ecological information, ethno-botanical notes and a discussion of morphology. In this

  16. Revision of Pachycentria (Melastomataceae)

    NARCIS (Netherlands)

    Clausing, Gudrun

    2000-01-01

    A revision of Pachycentria Blume, which includes the monotypic Pogonanthera Blume, is presented. Pachycentria comprises eight species and one subspecies. Two species, P. vogelkopensis and P. hanseniana, are newly described. The genus is distinguished from other genera in the Medinillinae by a small

  17. Revision of Oxandra (Annonaceae)

    NARCIS (Netherlands)

    Junikka, L.; Maas, P.J.M.; Maas-van de Kamer, H.; Westra, L.Y.Th.

    2016-01-01

    A taxonomic revision is given of the Neotropical genus Oxandra (Annonaceae). Within the genus 27 species are recognized, 4 of which are new to science. Most of the species are occurring in tropical South America, whereas a few (6) are found in Mexico and Central America and two in the West Indies

  18. Revision without ordinals

    NARCIS (Netherlands)

    Rivello, Edoardo

    2013-01-01

    We show that Herzberger’s and Gupta’s revision theories of truth can be recast in purely inductive terms, without any appeal neither to the transfinite ordinal numbers nor to the axiom of Choice. The result is presented in an abstract and general setting, emphasising both its validity for a wide

  19. Revising and editing for translators

    CERN Document Server

    Mossop, Brian

    2014-01-01

    Revising and Editing for Translators provides guidance and learning materials for translation students learning to edit texts written by others, and professional translators wishing to improve their self-revision ability or learning to revise the work of others. Editing is understood as making corrections and improvements to texts, with particular attention to tailoring them to the given readership. Revising is this same task applied to draft translations. The linguistic work of editors and revisers is related to the professional situations in which they work. Mossop offers in-depth coverage of a wide range of topics, including copyediting, style editing, structural editing, checking for consistency, revising procedures and principles, and translation quality assessment. This third edition provides extended coverage of computer aids for revisers, and of the different degrees of revision suited to different texts. The inclusion of suggested activities and exercises, numerous real-world examples, a proposed gra...

  20. Olkiluoto site description 2006

    International Nuclear Information System (INIS)

    Andersson, J.; Ahokas, H.; Hudson, J.A.

    2007-03-01

    This second version of the Olkiluoto Site Report, produced by the OMTF (Olkiluoto Modelling Task Force), updates the Olkiluoto Site Report 2004 (Posiva 2005) with the data and knowledge obtained up to December 2005. The main product of the modelling has been to develop a descriptive model of the site (the Site Descriptive Model), i.e. a model describing the geometry, properties of the bedrock and the water and the associated interacting processes and mechanisms. For practical reasons, the Site Descriptive Model is divided into five parts: surface system, geology, rock mechanics, hydrogeology and hydrogeochemistry, which are presented in individual chapters. Four separated models are presented: the geological, rock mechanics, hydrogeological and hydrogeochemical models. The consistency between the hydrogeological and hydrogeochemical models is assessed in a joint chapter. Chapter 1 presents an outline of the report, explains the background to its development and sets out its objectives and scope. It is also introduces and explains the integrated modelling methodology, the nomenclature used in the descriptions of the models and the prediction/outcome studies. Chapter 2 provides a brief overview of the data used for producing the Site Description. Chapters 3 to 8 present the descriptive modelling, which involves interpreting data, interpolating or extrapolating between measurement points and calibrating the model against data, based on the various assumptions made about each conceptual model. Chapter 9 presents the results of the prediction/outcome studies performed during 2005 and Chapter 10 the overall consistency and confidence assessment. Overall conclusions are provided in Chapter 11. The main advances since Site Report 2004 are: A new geological model is presented in Chapter 4, representing a significant change from Bedrock Model 2003/1. There has been extensive use of geological data, whereas hydrogeological data have deliberately not been used and more

  1. Decontamination of the activation product based on a legal revision of the cyclotron vault room on the non-self-shield compact medical cyclotron

    International Nuclear Information System (INIS)

    Komiya, Isao; Umezu, Yoshiyuki; Fujibuchi, Toshiou; Nakamura, Kazumasa; Baba, Shingo; Honda, Hiroshi

    2016-01-01

    The non-self-shield compact medical cyclotron and the cyclotron vault room were in operation for 27 years. They have now been decommissioned. We efficiently implemented a technique to identify an activation product in the cyclotron vault room. Firstly, the distribution of radioactive concentrations in the concrete of the cyclotron vault room was estimated by calculation from the record of the cyclotron operation. Secondly, the comparison of calculated results with an actual measurement was performed using a NaI scintillation survey meter and a high-purity germanium detector. The calculated values were overestimated as compared to the values measured using the Nal scintillation survey meter and the high-purity germanium detector. However, it could limit the decontamination area. By simulating the activation range, we were able to minimize the concrete core sampling. Finally, the appropriate range of radioactivated area in the cyclotron vault room was decontaminated based on the results of the calculation. After decontamination, the radioactive concentration was below the detection limit value in all areas inside the cyclotron vault room. By these procedures, the decommissioning process of the cyclotron vault room was more efficiently performed. (author)

  2. Introduction of 'Physicochemical and manufacturing basis for uranium concentrates production from wastes of hydrometallurgical plants and technical waters (Second edition, revised)'

    International Nuclear Information System (INIS)

    Khakimov, N.; Nazarov, Kh.M.; Mirsaidov, I.U.

    2012-01-01

    The uranium deposits of Tajikistan played an immensely significant role in the practical solution of a radioactive raw materials problem which appeared during the post-World War II years in the USSR. The pioneer in this field became complex №6 (currently known as 'Vostokredmet'). The first soviet uranium was produced from the ores extracted from the republic's deposits. For 50 years (1945-1995 y.) , uranium bearing raw materials from all over the former USSR were delivered to Tajikistan, and uranium oxide was produced, which was later delivered back to Russia for further production of enriched uranium. The total volume of uranium produced in Tajikistan plants was approximately 100 thousands tons. In Soghd region, during that period, more than 55 million tons of uranium waste was accumulated. The total activity of the waste, according to different calculations, is approximately 240-285 TBq. The total amount of waste in dumps and tailings piles is estimated to be more than 170 million tons, most of which are located in the neighborhoods of hydrometallurgical plants and heap leaching locations. Uranium industry wastes in Northern Tajikistan have become attractive for different investors and commercial companies, from secondary reprocessing of mines and tailings' point of view, since the uranium price is increasing. In this regard, research on developing uranium extraction methods from wastes is broadening. The study of the possibility and economic reasonability of reprocessing former year's dumps requires comprehensive examination, and relates not only to uranium extraction but to safe extraction of dumps from tailings as well.

  3. Maximum surgical blood ordering schedules for revision lower limb arthroplasty.

    Science.gov (United States)

    Mahadevan, Devendra; Challand, Christopher; Clarke, Andrew; Keenan, Jonathan

    2011-05-01

    Effective utilisation of blood products is fundamental. The introduction of maximum surgical blood ordering schedules (MSBOS) for operations has been shown to improve transfusion services. A retrospective analysis was undertaken to establish an evidence-based MSBOS for revision total hip replacement (THR) and total knee revision (TKR). The impact of this schedule on blood conservation was analysed. A retrospective analysis was undertaken on 397 patients who underwent revision THR and TKR over a 4-year period. The cross-match-to-transfusion ratio (CTR) and transfusion index (TI) were calculated. A MSBOS protocol was created based on the TIs and its' impact on transfusion services was assessed prospectively on 125 patients by comparing CTRs. In revision THR, TI was 1.19 for elective cases, 1.55 for emergency cases and 2.35 for infected cases. There was no difference in TI for revisions of cemented and uncemented components. Single component THR revision required less transfusion. In revision TKR, TI was 0.31 for elective cases, 2.0 for emergency cases and 1.23 for cases with infection. The introduction of the MSBOS protocol had resulted in a considerable improvement in blood ordering. Reductions in the CTR were seen for all types of revision surgery, but most evident in elective revision THR (3.24-2.18) and elective revision TKR (7.95-1.2). Analysis confirmed that excessive cross-matching occurred for revision lower limb arthroplasty. The introduction of our MSBOS protocol promoted blood conservation and compliance with established national guidelines.

  4. Descriptive sensory evaluations

    DEFF Research Database (Denmark)

    Dehlholm, Christian

    A recent trend in descriptive sensory evaluation methodology has been the application of rapid evaluation techniques. The ease in use makes the techniques extremely easy to implement by industry and university environments. Thus, one might not consider validity in the choice of method. The overall...... aim of this thesis is to compare and evaluate selected rapid evaluation techniques for sensory profiling. Method variations have been suggested for evaluations in product development and quality control, and method insight is provided. The thesis includes three original studies, designed...... as a consequence of the current practices and needs faced in the industry. Study I compared applicability and validity of rapid methods across several panels of trained assessors. Two rapid approaches were introduced for the evaluation of foods. The first method, ‘Free Multiple Sorting’, allows subjects to perform...

  5. SURFACE INDUSTRIAL HVAC SYSTEM DESCRIPTION DOCUMENT

    Energy Technology Data Exchange (ETDEWEB)

    M.M. Ansari

    2005-04-05

    The purpose of this system description document (SDD) is to establish requirements that drive the design of the surface industrial heating, ventilation, and air-conditioning (HVAC) system and its bases to allow the design effort to proceed to license application. This SDD will be revised at strategic points as the design matures. This SDD identifies the requirements and describes the system design, as it currently exists, with emphasis on attributes of the design provided to meet the requirements. This SDD is an engineering tool for design control; accordingly, the primary audience and users are design engineers. This SDD is part of an iterative design process. It leads the design process with regard to the flowdown of upper tier requirements onto the system. Knowledge of these requirements is essential to performing the design process. The SDD follows the design with regard to the description of the system. The description that provided in this SDD reflects the current results of the design process.

  6. Indicators of dependence for different types of tobacco product users: Descriptive findings from Wave 1 (2013-2014) of the Population Assessment of Tobacco and Health (PATH) study.

    Science.gov (United States)

    Strong, David R; Pearson, Jennifer; Ehlke, Sarah; Kirchner, Thomas; Abrams, David; Taylor, Kristie; Compton, Wilson M; Conway, Kevin P; Lambert, Elizabeth; Green, Victoria R; Hull, Lynn C; Evans, Sarah E; Cummings, K Michael; Goniewicz, Maciej; Hyland, Andrew; Niaura, Raymond

    2017-09-01

    With no established standard for assessing tobacco dependence (TD) across tobacco products in surveys, the Population Assessment of Tobacco and Health (PATH) Study provides a unique platform for examining the psychometric properties and validity of multiple indicators of tobacco dependence across a range of tobacco products. A U.S. nationally representative sample from the 32,320 adult Wave 1 interviews with analyses focused on 14,287 respondents who were current established users of tobacco products. This analysis confirms a single primary latent construct underlying responses to TD indicators for cigarettes, e-cigarettes, cigars, hookah, and smokeless tobacco products. Mutually exclusive past year tobacco-user groups included: cigarette only (n=8689), e-cigarette only (n=437), cigar only (traditional, cigarillo, or filtered) (n=706), hookah only (n=461), smokeless tobacco only (n=971), cigarette plus e-cigarette (n=709), and multiple tobacco product users (n=2314). Differential Item Functioning (DIF) analyses supported use of 16 of the 24 examined TD indicators for comparisons across tobacco users. With cigarette users as a reference (mean=0.0, SD=1.0), we observed a range of TD with hookah (mean=-1.71) and cigar (mean=-1.92) only users being the lowest, and cigarette plus e-cigarette product users being the highest (mean=0.35). Regression models including sociodemographic factors supported concurrent validity with increased product use frequency and TD among cigarette-only (p<0.001), e-cigarette only (p<0.002), cigar (p<0.001), hookah only (p<0.001), and smokeless tobacco users (p<0.001). The PATH Study Adult Wave 1 Questionnaire provided psychometrically valid measures of TD that enables future regulatory investigations of nicotine dependence across tobacco products. Copyright © 2017 Elsevier B.V. All rights reserved.

  7. Milgrom's revision of Newton's laws: Dynamical and cosmological consequences

    International Nuclear Information System (INIS)

    Felten, J.E.; and University of Maryland, College Park)

    1984-01-01

    Milgrom's recent revision of Newtonian dynamics was introduced to eliminate the inference that large quantities of invisible mass exist in galaxies. I show by simple examples that a Milgrom acceleration, in the form presented so far, implies other far-reaching changes in dynamics. The momentum of an isolated system is not conserved, and the usual theorem for center-of-mass motion of any system does not hold. Naive applications require extreme caution. The model fails to provide a complete description of particle dynamics and should be thought of as a revision of Kepler's laws rather than Newton's

  8. Guidelines for Description

    NARCIS (Netherlands)

    Links, P.; Horsman, Peter; Kühnel, Karsten; Priddy, M.; Reijnhoudt, Linda; Merenmies, Mark

    2013-01-01

    The Guidelines follow the conceptual metadata model (deliverable 17.2). They include guidelines for description of collection-holding institutions, document collections, organisations, personalities, events, camps and ghettos. As much as possible the guidelines comply with the descriptive standards

  9. Strengthening the Role of Part-Time Faculty in Community Colleges. Example Job Description for Part-Time Faculty: Valencia College--Job Description and Essential Competencies

    Science.gov (United States)

    Center for Community College Student Engagement, 2013

    2013-01-01

    In an effort to support college conversations regarding strengthening the role of part-time faculty, this brief document presents the job description for a Valencia College part-time/adjunct professor (revised as of July 19, 2013). The description includes essential functions, qualifications, and knowledge, skills, and abilities. This is followed…

  10. SNF AGING SYSTEM DESCRIPTION DOCUMENT

    International Nuclear Information System (INIS)

    L.L. Swanson

    2005-01-01

    The purpose of this system description document (SDD) is to establish requirements that drive the design of the spent nuclear fuel (SNF) aging system and associated bases, which will allow the design effort to proceed. This SDD will be revised at strategic points as the design matures. This SDD identifies the requirements and describes the system design, as it currently exists, with emphasis on attributes of the design provided to meet the requirements. This SDD is an engineering tool for design control; accordingly, the primary audience and users are design engineers. This SDD is part of an iterative design process. It leads the design process with regard to the flow down of upper tier requirements onto the system. Knowledge of these requirements is essential in performing the design process. The SDD follows the design with regard to the description of the system. The description provided in the SDD reflects the current results of the design process. Throughout this SDD, the term aging cask applies to vertical site-specific casks and to horizontal aging modules. The term overpack is a vertical site-specific cask that contains a dual-purpose canister (DPC) or a disposable canister. Functional and operational requirements applicable to this system were obtained from ''Project Functional and Operational Requirements'' (F andOR) (Curry 2004 [DIRS 170557]). Other requirements that support the design process were taken from documents such as ''Project Design Criteria Document'' (PDC) (BSC 2004 [DES 171599]), ''Site Fire Hazards Analyses'' (BSC 2005 [DIRS 172174]), and ''Nuclear Safety Design Bases for License Application'' (BSC 2005 [DIRS 171512]). The documents address requirements in the ''Project Requirements Document'' (PRD) (Canori and Leitner 2003 [DIRS 166275]). This SDD includes several appendices. Appendix A is a Glossary; Appendix B is a list of key system charts, diagrams, drawings, lists and additional supporting information; and Appendix C is a list of

  11. Programme for the Environmental Control at the Swedish Nuclear Facilities, Revision; Omgivningskontrollprogram foer de kaerntekniska anlaeggningarna, revision

    Energy Technology Data Exchange (ETDEWEB)

    Linden, Ann-Marie

    2004-12-01

    This report contains a revised version of the Environmental Monitoring Programme for the Swedish Nuclear Facilities. The revision is based on earlier experiences and evaluations. Some samples have been excluded. Some have been added, for example spruce cone and the food products apple and currant. The sediment samples of 2 cm length have been completed with samples of 10 cm length every fourth year to follow the migration of radio nuclides down the sediment layers over time. The revised Environmental Monitoring Programme is valid from the 1st of January 2005.

  12. Xylitol production by yeasts isolated from rotting wood in the Galápagos Islands, Ecuador, and description of Cyberlindnera galapagoensis f.a., sp. nov.

    Science.gov (United States)

    Guamán-Burneo, Maria C; Dussán, Kelly J; Cadete, Raquel M; Cheab, Monaliza A M; Portero, Patricia; Carvajal-Barriga, Enrique J; da Silva, Sílvio S; Rosa, Carlos A

    2015-10-01

    This study evaluated D-xylose-assimilating yeasts that are associated with rotting wood from the Galápagos Archipelago, Ecuador, for xylitol production from hemicellulose hydrolysates. A total of 140 yeast strains were isolated. Yeasts related to the clades Yamadazyma, Kazachstania, Kurtzmaniella, Lodderomyces, Metschnikowia and Saturnispora were predominant. In culture assays using sugarcane bagasse hemicellulose hydrolysate, Candida tropicalis CLQCA-24SC-125 showed the highest xylitol production, yield and productivity (27.1 g L(-1) xylitol, Y p/s (xyl) = 0.67 g g(-1), Qp = 0.38 g L(-1). A new species of Cyberlindnera, strain CLQCA-24SC-025, was responsible for the second highest xylitol production (24 g L(-1), Y p/s (xyl) = 0.64 g g(-1), Qp = 0.33 g L(-1) h(-1)) on sugarcane hydrolysate. The new xylitol-producing species Cyberlindnera galapagoensis f.a., sp. nov., is proposed to accommodate the strain CLQCA-24SC-025(T) (=UFMG-CM-Y517(T); CBS 13997(T)). The MycoBank number is MB 812171.

  13. KMR kt-factorization procedure for the description of the LHCb forward hadron–hadron Z0 production at s=13TeV

    Directory of Open Access Journals (Sweden)

    M. Modarres

    2017-09-01

    Full Text Available Quite recently, two sets of new experimental data from the LHCb and the CMS Collaborations have been published, concerning the production of the Z0 vector boson in hadron–hadron collisions with the center-of-mass energy ECM=s=13TeV. On the other hand, in our recent work, we have conducted a set of semi-NLO calculations for the production of the electro-weak gauge vector bosons, utilizing the unintegrated parton distribution functions (UPDF in the frameworks of Kimber–Martin–Ryskin (KMR or Martin–Ryskin–Watt (MRW and the kt-factorization formalism, concluding that the results of the KMR scheme are arguably better in describing the existing experimental data, coming from D0, CDF, CMS and ATLAS Collaborations. In the present work, we intend to follow the same semi-NLO formalism and calculate the rate of the production of the Z0 vector boson, utilizing the UPDF of KMR within the dynamics of the recent data. It will be shown that our results are in good agreement with the new measurements of the LHCb and the CMS Collaborations.

  14. Description of the blowdown test facility COG program on in-reactor fission product release, transport, and deposition under severe accident conditions

    International Nuclear Information System (INIS)

    Fehrenbach, P.J.; Wood, J.C.

    1987-06-01

    Loss-of-coolant accidents with additional impairment of emergency cooling would probably result in high fuel temperatures leading to severe fuel damage (SFD) and significant fission product activity would then be transported along the PHTS to the break where a fraction of it would be released and transport under such conditions, there are many interacting and sometimes competing phenomena to consider. Laboratory simulations are being used to provide data on these individual phenomena, such as UO 2 oxidation and Zr-UO 2 interaction, from which mathematical models can be constructed. These are then combined into computer codes to include the interaction effects and assess the overall releases. In addition, in-reactor tests are the only source of data on release and transport of short-lived fission product nuclides, which are important in the consequence analysis of CANDU reactor accidents. Post-test decontamination of an in-reactor test facility also provides a unique opportunity to demonstrate techniques and obtain decontamination data relevant to post-accident rehabilitation of CANDU power reactors. Specialized facilities are required for in-reactor testing because of the extensive release of radioactive fission products and the high temperatures involved (up to 2500 degrees Celsius). To meet this need for the Canadian program, the Blowdown Test Facility (BTF) has been built in the NRU reactor at Chalk River. Between completion of construction in mid-1987 and the first Zircaloy-sheathed fuel test in fiscal year 1987/88, several commissioning tests are being performed. Similarly, extensive development work has been completed to permit application of instrumentation to irradiated fuel elements, and in support of post-test fuel assembly examination. A program of decontamination studies has also been developed to generate information relevant to post-accident decontamination of power reactors. The BTF shared cost test program funded by the COG High Temperature

  15. Description and validation of an AOT product over land at the 0.6 μm channel of the SEVIRI sensor onboard MSG

    Directory of Open Access Journals (Sweden)

    E. Bernard

    2011-11-01

    Full Text Available The Spinning Enhanced Visible and InfraRed Imager (SEVIRI aboard Meteosat Second Generation (MSG launched in 2003 by EUMETSAT is dedicated to the Nowcasting applications and Numerical Weather Prediction and to the provision of observations for climate monitoring and research. We use the data in visible and near infrared (NIR channels to derive the aerosol optical thickness (AOT over land. The algorithm is based on the assumption that the top of the atmosphere (TOA reflectance increases with the aerosol load. This is a reasonable assumption except in case of absorbing aerosols above bright surfaces. We assume that the minimum in a 14-days time series of the TOA reflectance is, once corrected from gaseous scattering and absorption, representative of the surface reflectance. The AOT and the aerosol model (a set of 5 models is used, are retrieved by matching the simulated TOA reflectance with the TOA reflectances measured by SEVIRI in its visible and NIR spectral bands.

    The high temporal resolution of the data acquisition by SEVIRI allows to retrieve the AOT every 15 min with a spatial resolution of 3 km at sub-satellite point, over the entire SEVIRI disk covering Europe, Africa and part of South America. The resulting AOT, a level 2 product at the native temporal and spatial SEVIRI resolutions, is presented and evaluated in this paper.

    The AOT has been validated using ground based measurements from AErosol RObotic NETwork (AERONET, a sun-photometer network, focusing over Europe for 3 months in 2006. The SEVIRI estimates correlate well with the AERONET measurements, r = 0.64, with a slight overestimate, bias = −0.017. The sources of errors are mainly the cloud contamination and the bad estimation of the surface reflectance. The temporal evolutions exhibited by both datasets show very good agreement which allows to conclude that the AOT Level 2 product from SEVIRI can be used to quantify the aerosol content and to monitor

  16. Investigations of the signal production in liquid-ionization-chambers by the passage of strongly ionizing particles and a now theoretical description of recombination

    International Nuclear Information System (INIS)

    Supper, R.

    1991-12-01

    Starting from the original Onsager-theory an extended theory is presented describing the recombination of charge carriers and of signal production in TMS (tetramethylsilane) liquid ionization chambers. The shielding by the impurities of the liquid is explicitly taken into account. By dedicated measurements various parameter dependencies of the theory are checked and the parameter values are experimentally determined. The studies comprise test procedures of the TMS chamber operation and are in context of a hadron calorimeter set up of the cosmic ray experiment KASCADE. (orig.) [de

  17. Invasive lobular carcinoma with extracellular mucin production-a novel pattern of lobular carcinomas of the breast. Clinico-pathological description of eight cases.

    Science.gov (United States)

    Cserni, Gábor; Floris, Giuseppe; Koufopoulos, Nektarios; Kovács, Anikó; Nonni, Afroditi; Regitnig, Peter; Stahls, Anders; Varga, Zsuzsanna

    2017-07-01

    Invasive lobular carcinoma of the breast is known to produce intracellular mucin and has been recognized in single-case reports to show extracellular mucin production, as well. This latter morphology is not only rare but must also be under- or misdiagnosed. The aim was to better characterize this entity. Cases of lobular cancers demonstrating extracellular mucin formation were identified in a multi-institutional effort and their clinical and morphologic features were assessed. Immunohistochemistry was used to characterize the E-cadherin-membrane complex, neuroendocrine differentiation, and to some extent, mucin formation. All but one of the eight cases occurred in postmenopausal patients. Extracellular mucin production was present in 5 to 50% of the tumour samples and rarely also appeared in nodal and distant metastases. The tumours were completely E-cadherin negative and showed cytoplasmic p120 positivity. The majority (n = 6/8) was also completely negative for β-catenin, but two tumours displayed focal β-catenin positivity in the mucinous area. MUC1 and MUC2 expression was observed in all and 7/8 tumours, respectively; neuroendocrine differentiation was present in only one. Invasive lobular carcinoma with extracellular mucin formation is a rare morphologic variant of lobular carcinoma prone to be misdiagnosed and warranting further studies.

  18. Revised Rules for Concrete Bridges

    DEFF Research Database (Denmark)

    Thoft-Christensen, Palle; Jensen, F. M.; Middleton, C.

    This paper is based on research performed for the Highway Agency, London, UK under the project DPU/9/44 "Revision of Bridge Assessment Rules Based on Whole Life Performance: Concrete Bridges" It contains details of a methodology which can be used to generate Whole Life (WL) reliability profiles....... These WL reliability profiles may be used to establish revised rules for Concrete Bridges....

  19. Emotion Processes in Knowledge Revision

    Science.gov (United States)

    Trevors, Gregory J.; Kendeou, Panayiota; Butterfuss, Reese

    2017-01-01

    In recent years, a number of insights have been gained into the cognitive processes that explain how individuals overcome misconceptions and revise their previously acquired incorrect knowledge. The current study complements this line of research by investigating the moment-by-moment emotion processes that occur during knowledge revision using a…

  20. Using Knowledge Management to Revise Software-Testing Processes

    Science.gov (United States)

    Nogeste, Kersti; Walker, Derek H. T.

    2006-01-01

    Purpose: This paper aims to use a knowledge management (KM) approach to effectively revise a utility retailer's software testing process. This paper presents a case study of how the utility organisation's customer services IT production support group improved their test planning skills through applying the American Productivity and Quality Center…

  1. Philippines revises power plans

    Energy Technology Data Exchange (ETDEWEB)

    Hayes, D.

    1988-02-01

    Following an unexpected surge in electricity demand the Philippines has revised its medium term power development programme. The sharp increase in electricity consumption follows three years of slack demand due to civil disturbances before the end of the Macros administration and the election of Corazon Aquino as President in 1986. Originally, the Aquino government's medium term power development plans called for about 500MW of generating capacity to be installed between 1986 and 1992. The three proposed plants were scheduled for commissioning in 1991 and 1992. However, a spurt in power demand growth during the past nine months has caused concern among industrialists that power shortages could occur by the end of the decade. So additional capacity will be installed to prevent an anticipated shortfall in electricity supplies by the early 1990s.

  2. Microcomputers and the Improvement of Revision Skills.

    Science.gov (United States)

    Balajthy, Ernest; And Others

    1987-01-01

    Discusses use of word processing software as an effective tool in writing and revision instruction, and describes the role of the teacher. Examples of exercises that encourage revision and of software designed to teach effective revision skills are reviewed. (MBR)

  3. SLICER Airborne Laser Altimeter Characterization of Canopy Structure and Sub-canopy Topography for the BOREAS Northern and Southern Study Regions: Instrument and Data Product Description

    Science.gov (United States)

    Hall, Forrest G. (Editor); Nickeson, Jaime (Editor); Harding, D. J.; Blair, J. B.; Rabine, D. L.; Still, K. L.

    2000-01-01

    SLICER data were acquired in support of BOREAS at all of the TF sites in the SSA and NSA, and along transects between the study areas. Data were acquired on 5 days between 18-Jul and 30-Jul-1996. Each coverage of a tower site is typically 40 km in length, with a minimum of 3 and a maximum of 10 lines across each tower oriented in a variety of azimuths. The SLICER data were acquired simultaneously with ASAS hyperspectral, multiview angle images. The SLICER Level 3 products consist of binary files for each flight line with a data record for each laser shot composed of 13 parameters and a 600-byte waveform that is the raw record of the backscatter laser energy reflected from Earth's surface. The SLICER data are stored in a combination of ASCII and binary data files.

  4. A Descriptive Longitudinal Study of Changes in Vape Shop Characteristics and Store Policies in Anticipation of the 2016 FDA Regulations of Tobacco Products, Including E-Cigarettes

    Directory of Open Access Journals (Sweden)

    Sheila Yu

    2018-02-01

    Full Text Available After proposing the “Deeming Rule” in 2014, the U.S. Food and Drug Administration (FDA began regulating the manufacturing, marketing, and sales of electronic cigarette (e-cigarette products as tobacco products in 2016. The current study conducted vape shop store observations and surveyed Los Angeles–area shop employees (assessing their beliefs, awareness, and perceptions of e-cigarettes and related FDA regulations at two time points one year apart to better understand what vape shop retailers would do given FDA’s soon-to-be-enacted Deeming Rule. The study also compared retailer beliefs/awareness/actions and store characteristics immediately after the Deeming Rule proposal versus a year after the Rule had been proposed, right before its enactment. Two data collection waves occurred before the Deeming Rule enactment, with Year 1 surveying 77 shops (2014 and Year 2 surveying 61 shops (2015–2016. Between the data collection points, 16 shops had closed. Among the shops that were open at both time points, the majority (95% in Year 1; 74% in Year 2 were aware of some FDA regulations or other policies applying to vape shops. However, overall awareness of FDA regulations and state/local policies governing e-cigarettes significantly decreased from Year 1 to Year 2. At both time points, all shops offered customers free puffs of nicotine-containing e-liquids (prohibited by the then upcoming Deeming Rule. Perceptions of e-cigarette safety also significantly decreased between the years. Exploring vape shop retailer perceptions and store policies (i.e., free puffs/samples displays, perceptions of e-cigarette safety, etc. over time will help the FDA assess the needs of the vape shop community and develop more effective retailer education campaigns and materials targeted to increase compliance with the newly enacted regulations.

  5. A description of village chicken production systems and prevalence of gastrointestinal parasites: Case studies in Limpopo and KwaZulu-Natal provinces of South Africa

    Directory of Open Access Journals (Sweden)

    Dikeledi P. Malatji

    2016-05-01

    Full Text Available The majority of rural households in developing countries own village chickens that are reared under traditional scavenging systems with few inputs and exposure to various parasitic infestations. Understanding of the village chicken farming system and its influence on helminth infestation is a prerequisite for optimal prevention and control strategies. This study investigated the village chicken production system and associated gastrointestinal parasites in 87 households from Limpopo (n = 39 and KwaZulu-Natal (n = 48 provinces of South Africa. A total of 191 village chicken faecal samples and 145 intestines were collected to determine the prevalence of gastrointestinal parasites in villages of Limpopo and KwaZulu-Natal provinces, respectively. The faecal floatation analysis of samples from Limpopo and KwaZulu-Natal provinces indicated infestations by Ascaridia galli (18.77%, Heterakis gallinarum (15.56% and Capillaria spp. (4.00%; tapeworms Choanotaenia infundibulum (2.10% and Raillietina cesticillus (6.00% and Eimeria spp. (29.46%. Mixed infestations were observed in five (4.90% samples from Limpopo province and in only four (4.49% from KwaZulu-Natal province, of which 1.12% were a mixture of C. infundibulum and Eimeria spp. and 3.37% a combination of H. gallinarum and Eimeria spp. In Limpopo, 2.94% of the chickens were positive for H. gallinarum and Eimeria spp., whilst 0.98% had A. galli and Capillaria spp. infestations. Further investigation is needed to understand the impact of gastrointestinal parasites on village chicken health and production and develop appropriate intervention and control strategies feasible for smallholder farmers. Keywords: Helminthes; Village chickens; Smallholder farming systems; Faecal samples

  6. A Descriptive Longitudinal Study of Changes in Vape Shop Characteristics and Store Policies in Anticipation of the 2016 FDA Regulations of Tobacco Products, Including E-Cigarettes.

    Science.gov (United States)

    Yu, Sheila; Escobedo, Patricia; Garcia, Robert; Cruz, Tess Boley; Unger, Jennifer B; Baezconde-Garbanati, Lourdes; Meza, Leah; Sussman, Steve

    2018-02-11

    After proposing the "Deeming Rule" in 2014, the U.S. Food and Drug Administration (FDA) began regulating the manufacturing, marketing, and sales of electronic cigarette (e-cigarette) products as tobacco products in 2016. The current study conducted vape shop store observations and surveyed Los Angeles-area shop employees (assessing their beliefs, awareness, and perceptions of e-cigarettes and related FDA regulations) at two time points one year apart to better understand what vape shop retailers would do given FDA's soon-to-be-enacted Deeming Rule. The study also compared retailer beliefs/awareness/actions and store characteristics immediately after the Deeming Rule proposal versus a year after the Rule had been proposed, right before its enactment. Two data collection waves occurred before the Deeming Rule enactment, with Year 1 surveying 77 shops (2014) and Year 2 surveying 61 shops (2015-2016). Between the data collection points, 16 shops had closed. Among the shops that were open at both time points, the majority (95% in Year 1; 74% in Year 2) were aware of some FDA regulations or other policies applying to vape shops. However, overall awareness of FDA regulations and state/local policies governing e-cigarettes significantly decreased from Year 1 to Year 2. At both time points, all shops offered customers free puffs of nicotine-containing e-liquids (prohibited by the then upcoming Deeming Rule). Perceptions of e-cigarette safety also significantly decreased between the years. Exploring vape shop retailer perceptions and store policies (i.e., free puffs/samples displays, perceptions of e-cigarette safety, etc.) over time will help the FDA assess the needs of the vape shop community and develop more effective retailer education campaigns and materials targeted to increase compliance with the newly enacted regulations.

  7. Revision of the Neotropical Xanthandrus Verral (Diptera, Syrphidae

    Directory of Open Access Journals (Sweden)

    Borges Zuleica M.

    2003-01-01

    Full Text Available The Neotropical genus Xanthandrus Verral, 1901 is revised. Six species are redescribed: X. bucephalus (Wiedemann, 1830, X. cubanus Fluke, 1936, X. mellinoides (Macquart, 1846, X. mexicanus Curran, 1930, X. nitidulus Fluke, 1937, and X. plaumanni Fluke, 1937. Three species are included based on original descriptions: X. flavomaculatus Shannon, 1927, X. palliatus (Fluke, 1945, and X. simplex (Loew, 1861. New synonyms proposed: Argentinomyia longicornis (Walker, 1837 = Xanthandrus biguttatus Hull, 1945 syn. nov., and Xanthandrus bucephalus (Wiedemann, 1830 = Melanostoma quadrinotata Bigot, 1884 syn. nov. Description of terminalia, a key for Neotropical species, and illustrations are also presented.

  8. Description and exploitation of benchmarks involving {sup 149}Sm, a fission product taking part of the burn up credit in spent fuels

    Energy Technology Data Exchange (ETDEWEB)

    Anno, J.; Poullot, G. [CEA Centre d`Etudes de Fontenay-aux-Roses, 92 (France). Inst. de Protection et de Surete Nucleaire; Fouillaud, P.; Grivot, P. [CEA Centre d`Etudes de Valduc, 21 - Is-sur-Tille (France)

    1995-12-31

    Up to now, there was no benchmark to validate the Fission Products (FPs) cross sections in criticality safety calculations. The protection and nuclear safety institute (IPSN) has begun an experimental program on 6 FPs ({sup 103}Rh, {sup 133}Cs, {sup 143}Nd, {sup 149}Sm, {sup 152}Sm, and {sup 155}Gd daughter of {sup 155}Eu) giving alone a decrease of reactivity equal to half the whole FPs in spent fuels (except Xe and I). Here are presented the experiments with the {sup 149}Sm and the results obtained with the APOLLO I-MORET III calculations codes. 11 experiments are carried out in a zircaloy tank of 3.5 1 containing slightly nitric acid solutions of Samarium (96,9% in weight of {sup 149S}m) at 0.1048 -0.2148 - 0.6262 g/l concentrations. It was placed in the middle of arrays of UO{sub 2} rods (4.742 % U5 weight %) at square pitch of 13 mm. The underwater height of the rods is the critical parameter. In addition, 7 experiments were performed with the same apparatus with water and boron proving a good experimental representativeness and a good accuracy of the calculations. As the reactivity worth of the Sm tank is between 2000 and 6000 10{sup -5}, the benchmarks are well representative and the cumulative absorption ratios show that {sup 149}Sm is well qualified under 1 eV. (authors). 8 refs., 7 figs., 6 tabs.

  9. Transcriptome sequencing and annotation of the microalgae Dunaliella tertiolecta: Pathway description and gene discovery for production of next-generation biofuels

    Directory of Open Access Journals (Sweden)

    Bibby Kyle

    2011-03-01

    Full Text Available Abstract Background Biodiesel or ethanol derived from lipids or starch produced by microalgae may overcome many of the sustainability challenges previously ascribed to petroleum-based fuels and first generation plant-based biofuels. The paucity of microalgae genome sequences, however, limits gene-based biofuel feedstock optimization studies. Here we describe the sequencing and de novo transcriptome assembly for the non-model microalgae species, Dunaliella tertiolecta, and identify pathways and genes of importance related to biofuel production. Results Next generation DNA pyrosequencing technology applied to D. tertiolecta transcripts produced 1,363,336 high quality reads with an average length of 400 bases. Following quality and size trimming, ~ 45% of the high quality reads were assembled into 33,307 isotigs with a 31-fold coverage and 376,482 singletons. Assembled sequences and singletons were subjected to BLAST similarity searches and annotated with Gene Ontology (GO and Kyoto Encyclopedia of Genes and Genomes (KEGG orthology (KO identifiers. These analyses identified the majority of lipid and starch biosynthesis and catabolism pathways in D. tertiolecta. Conclusions The construction of metabolic pathways involved in the biosynthesis and catabolism of fatty acids, triacylglycrols, and starch in D. tertiolecta as well as the assembled transcriptome provide a foundation for the molecular genetics and functional genomics required to direct metabolic engineering efforts that seek to enhance the quantity and character of microalgae-based biofuel feedstock.

  10. Description and exploitation of benchmarks involving 149Sm, a fission product taking part of the burn up credit in spent fuels

    International Nuclear Information System (INIS)

    Anno, J.; Poullot, G.

    1995-01-01

    Up to now, there was no benchmark to validate the Fission Products (FPs) cross sections in criticality safety calculations. The protection and nuclear safety institute (IPSN) has begun an experimental program on 6 FPs ( 103 Rh, 133 Cs, 143 Nd, 149 Sm, 152 Sm, and 155 Gd daughter of 155 Eu) giving alone a decrease of reactivity equal to half the whole FPs in spent fuels (except Xe and I). Here are presented the experiments with the 149 Sm and the results obtained with the APOLLO I-MORET III calculations codes. 11 experiments are carried out in a zircaloy tank of 3.5 1 containing slightly nitric acid solutions of Samarium (96,9% in weight of 149S m) at 0.1048 -0.2148 - 0.6262 g/l concentrations. It was placed in the middle of arrays of UO 2 rods (4.742 % U5 weight %) at square pitch of 13 mm. The underwater height of the rods is the critical parameter. In addition, 7 experiments were performed with the same apparatus with water and boron proving a good experimental representativeness and a good accuracy of the calculations. As the reactivity worth of the Sm tank is between 2000 and 6000 10 -5 , the benchmarks are well representative and the cumulative absorption ratios show that 149 Sm is well qualified under 1 eV. (authors). 8 refs., 7 figs., 6 tabs

  11. The Hartree product and the description of local and global quantities in atomic systems: A study within Kohn-Sham theory

    International Nuclear Information System (INIS)

    Garza, Jorge; Nichols, Jeffrey A.; Dixon, David A.

    2000-01-01

    The Hartree product is analyzed in the context of Kohn-Sham theory. The differential equations that emerge from this theory are solved with the optimized effective potential using the Krieger, Li, and Iafrate approximation, in order to get a local potential as required by the ordinary Kohn-Sham procedure. Because the diagonal terms of the exact exchange energy are included in Hartree theory, it is self-interaction free and the exchange potential has the proper asymptotic behavior. We have examined the impact of this correct asymptotic behavior on local and global properties using this simple model to approximate the exchange energy. Local quantities, such as the exchange potential and the average local electrostatic potential are used to examine whether the shell structure in an atom is revealed by this theory. Global quantities, such as the highest occupied orbital energy (related to the ionization potential) and the exchange energy are also calculated. These quantities are contrasted with those obtained from calculations with the local density approximation, the generalized gradient approximation, and the self-interaction correction approach proposed by Perdew and Zunger. We conclude that the main characteristics in an atomic system are preserved with the Hartree theory. In particular, the behavior of the exchange potential obtained in this theory is similar to those obtained within other Kohn-Sham approximations. (c) 2000 American Institute of Physics

  12. 1993 baseline solid waste management system description

    International Nuclear Information System (INIS)

    Armacost, L.L.; Fowler, R.A.; Konynenbelt, H.S.

    1994-02-01

    Pacific Northwest Laboratory has prepared this report under the direction of Westinghouse Hanford Company. The report provides an integrated description of the system planned for managing Hanford's solid low-level waste, low-level mixed waste, transuranic waste, and transuranic mixed waste. The primary purpose of this document is to illustrate a collective view of the key functions planned at the Hanford Site to handle existing waste inventories, as well as solid wastes that will be generated in the future. By viewing this system as a whole rather than as individual projects, key facility interactions and requirements are identified and a better understanding of the overall system may be gained. The system is described so as to form a basis for modeling the system at various levels of detail. Model results provide insight into issues such as facility capacity requirements, alternative system operating strategies, and impacts of system changes (ie., startup dates). This description of the planned Hanford solid waste processing system: defines a baseline system configuration; identifies the entering waste streams to be managed within the system; identifies basic system functions and waste flows; and highlights system constraints. This system description will evolve and be revised as issues are resolved, planning decisions are made, additional data are collected, and assumptions are tested and changed. Out of necessity, this document will also be revised and updated so that a documented system description, which reflects current system planning, is always available for use by engineers and managers. It does not provide any results generated from the many alternatives that will be modeled in the course of analyzing solid waste disposal options; such results will be provided in separate documents

  13. A study on scar revision

    Directory of Open Access Journals (Sweden)

    Ashutosh Talwar

    2016-04-01

    Full Text Available Introduction: Scars are psychologically distressing for the patients and have an impact on the quality of life and self esteem of the patients. Scar revision is an aesthetic skill which is mastered by plastic surgeons and encroached now by dermatosurgeons. Scars on the face are aesthetically unacceptable and various techniques have been improvised for making a scar aesthetically acceptable. Various types of techniques are used for scar revision like W plasty, Z plasty and VY plasty. Aims: To see the efficacy of various scar revision techniques including Z plasty, VY plasty and W plasty in 30 patients with disfiguring scars. Methods: We selected twenty patients of disfiguring scars for the study. The scars from various causes including trauma and burns were included in our study. Various techniques of scar revision include Z plasty, W plasty and VY plasty were performed according to the type and site of scar. Results: Male: female was 1.5: 1. The scar revision surgery yielded excellent results with minimal complications including haematoma formation, secondary infection and delayed healing seen in 5% patients each. Regarding the efficacy of scar revision, excellent improvement was seen in 60% patients, moderate improvement was seen in 30% patients and mild improvement was seen in 10% patients. Conclusions: Dermatologists can employ a number of surgical scar revision techniques. While some are better suited to treat specific types of scars, they can be used in combination with each other or with adjunctive therapies to achieve optimal results.

  14. A descriptive pilot study of cytokine production following stimulation of ex-vivo whole blood with commercial therapeutic feline hydrolyzed diets in individual healthy immunotolerant cats.

    Science.gov (United States)

    Kathrani, Aarti; Larsen, Jennifer A; Cortopassi, Gino; Datta, Sandipan; Fascetti, Andrea J

    2017-10-06

    Hydrolyzed diets are used in companion animals for the diagnosis and treatment of adverse food reaction. Similarly, hydrolyzed formulas are used in human infants with severe inflammatory bowel disease or milk allergy, and these must meet the standard of hypoallergenicity through rigorous testing. Unfortunately, no standards are currently applied to hydrolyzed veterinary therapeutic diets, and data for the immunogenicity of feline diets is also not available. Therefore, the main aim of this pilot study was to determine if ex-vivo whole blood stimulation assays could be used to characterize the cytokine response to hydrolyzed commercial diets in a small number of individual healthy immunotolerant cats. This approach has also been used to investigate cytokine production in response to cow milk protein in humans and currently similar studies do not exist in companion animals. Nine healthy cats previously eating the same basal diet were divided into groups and fed one of three hydrolyzed diets exclusively for 6 weeks. Heparinized whole blood was collected from each cat before and after the feeding trial. Ex-vivo whole blood stimulation assays were performed using crude extracts of the basal diet as a positive control, as this diet contained the same proteins present in the hydrolyzed diet but were intact, saline as a negative control, and each cat's respective hydrolyzed diet. Supernatants were collected and analyzed for tumor necrosis factor-alpha, interleukin-10 (IL-10), and interleukin-4 using enzyme-linked immunosorbant assay. Seven cats produced detectable amounts of the anti-inflammatory cytokine IL-10 upon stimulation with the basal diet. Two cats produced detectable amounts of IL-10 upon stimulation with a hydrolyzed soy-based diet and one cat produced a detectable amount of IL-10 upon stimulation with a hydrolyzed chicken-based diet (>125 pg/mL). Results from this pilot study suggest that in some healthy immunotolerant cats, some hydrolyzed diets may elicit a

  15. GOCI Yonsei aerosol retrieval version 2 aerosol products: improved algorithm description and error analysis with uncertainty estimation from 5-year validation over East Asia

    Science.gov (United States)

    Choi, M.; Kim, J.; Lee, J.; KIM, M.; Park, Y. J.; Holben, B. N.; Eck, T. F.; Li, Z.; Song, C. H.

    2017-12-01

    The Geostationary Ocean Color Imager (GOCI) Yonsei aerosol retrieval (YAER) version 1 algorithm was developed for retrieving hourly aerosol optical depth at 550 nm (AOD) and other subsidiary aerosol optical properties over East Asia. The GOCI YAER AOD showed comparable accuracy compared to ground-based and other satellite-based observations, but still had errors due to uncertainties in surface reflectance and simple cloud masking. Also, it was not capable of near-real-time (NRT) processing because it required a monthly database of each year encompassing the day of retrieval for the determination of surface reflectance. This study describes the improvement of GOCI YAER algorithm to the version 2 (V2) for NRT processing with improved accuracy from the modification of cloud masking, surface reflectance determination using multi-year Rayleigh corrected reflectance and wind speed database, and inversion channels per surface conditions. Therefore, the improved GOCI AOD ( ) is similar with those of Moderate Resolution Imaging Spectroradiometer (MODIS) and Visible Infrared Imaging Radiometer Suite (VIIRS) AOD compared to V1 of the YAER algorithm. The shows reduced median bias and increased ratio within range (i.e. absolute expected error range of MODIS AOD) compared to V1 in the validation results using Aerosol Robotic Network (AERONET) AOD ( ) from 2011 to 2016. The validation using the Sun-Sky Radiometer Observation Network (SONET) over China also shows similar results. The bias of error ( is within -0.1 and 0.1 range as a function of AERONET AOD and AE, scattering angle, NDVI, cloud fraction and homogeneity of retrieved AOD, observation time, month, and year. Also, the diagnostic and prognostic expected error (DEE and PEE, respectively) of are estimated. The estimated multiple PEE of GOCI V2 AOD is well matched with actual error over East Asia, and the GOCI V2 AOD over Korea shows higher ratio within PEE compared to over China and Japan. Hourly AOD products based on the

  16. Descriptive set theory

    CERN Document Server

    Moschovakis, YN

    1987-01-01

    Now available in paperback, this monograph is a self-contained exposition of the main results and methods of descriptive set theory. It develops all the necessary background material from logic and recursion theory, and treats both classical descriptive set theory and the effective theory developed by logicians.

  17. Description logics of context

    CSIR Research Space (South Africa)

    Klarman, S

    2013-05-01

    Full Text Available We introduce Description Logics of Context (DLCs) - an extension of Description Logics (DLs) for context-based reasoning. Our approach descends from J. McCarthy's tradition of treating contexts as formal objects over which one can quantify...

  18. Physics 3204. Course Description.

    Science.gov (United States)

    Newfoundland and Labrador Dept. of Education.

    A description of the physics 3204 course in Newfoundland and Labrador is provided. The description includes: (1) statement of purpose, including general objectives of science education; (2) a list of six course objectives; (3) course content for units on sound, light, optical instruments, electrostatics, current electricity, Michael Faraday and…

  19. Studies on Neotropical Phasmatodea XVI: Revision of Haplopodini Günther, 1953 (rev. stat.), with notes on the subfamily Cladomorphinae Bradley & Galil, 1977 and the descriptions of a new tribe, four new genera and nine new species (Phasmatodea: "Anareolatae": Phasmatidae: Cladomorphinae).

    Science.gov (United States)

    Hennemann, Frank H; Conle, Oskar V; Perez-Gelabert, Daniel E

    2016-06-27

    eggs. Haplopodini Günther, 1953 is re-established (rev. stat.) and comprises almost exclusively Caribbean genera previously placed in Hesperophasmatini by Bradley & Galil (1977) or Cranidiini by Zompro, (2004). Aploploides Rehn & Hebard, 1938, Diapherodes Gray, 1835, Haplopus Burmeister, 1838 and Paracranidium Brock, 1998 were misplaced in Cranidiini and are transferred to Haplopodini. On the basis of numerous morphological characters of the insects and eggs Hesperophasmatini is removed from Pseudophasmatidae: Xerosomatinae and re-transferred to its previous position in the subfamily Cladomorphinae sensu lato. A detailed newdiagnosis of Hesperophasmatini is presented, but is only provisional since the true diversity is as yet only fractionally known. The lack of a gula distinguishes Hesperophasmatini from all other tribes. The genus Laciphorus Redtenbacher, 1908 is removed from Hesperophasmatini and transferred to Diapheromeridae: Diapheromerinae: Diapheromerini. The new tribe Pterinoxylini n. trib. is established to contain only the type-genus Pterinoxylus Audinet-Serville, 1838. It is closely related and perhaps the sister taxon of Hesperophasmatini, with which it shares the presence of rough sensory areas on the probasisternum and profurcasternum. It differs from Hesperophasmatini and Haplopodini by the presence of a tympanal region (= stridulatory organ) in the alae of females and the alveolar eggs, which possess peripheral opercular and polar structures. Haplopodini is likely to be the sister group of Pterinoxylini n. trib. + Hesperophasmatini.        The tribe Haplopodini rev. stat. is revised at the species level and comprises eight almost exclusively Caribbean genera, four of which are newly described. All eight genera now contained in Haplopodini are described in detail, differentiated from their closest relatives and their relationships and systematic position within Haplopodini are discussed. Keys and maps showing their distributions are presented

  20. Zur linguistischen Beschreibung kommunikativer Einheiten in gesprochener Sprache (On the Linguistic Description of Communicative Units in Oral Language)

    Science.gov (United States)

    Rath, Rainer

    1973-01-01

    Slightly revised version of a lecture ( Zur grammatischen Beschreibung kommunikativer Elemente in Sprechakten'' Y On Grammatical Description of Communicative Elements in Speech''I) presented in Saarbrucken, West Germany, November 10, 1972. (DD)

  1. Revision of ASCE 4

    International Nuclear Information System (INIS)

    Nelson, T.A.; Murray, R.C.; Short, S.A.

    1995-01-01

    The original version of ASCE Standard 4, ''Seismic Analysis of Safety-Related Nuclear Structures'' was published in September 1986. It is ASCE policy to update its standards on a five year interval and the Working Group on Seismic Analysis of Safety Related Nuclear Structures was reconvened to formulate the revisions. The goal in updating the standard is to make sure that it is still relevant and that it incorporates the state of the practice in seismic engineering or, in some cases, where it has been demonstrated that state-of-the-art improvements need to be made to standard practice; new improvements are included. The contents of the new standard cover the same areas as the original version, with some additions. The contents are as follows: Input - response spectra and time histories; modeling of structures; analysis of structures; soil-structure interaction; input for subsystem analysis; special structures - buried pipes and conduits, earth-retaining walls, above-ground vertical tanks, raceways, and base-isolated structures; and an appendix providing seismic probabilistic risk assessment and margin assessment

  2. SNF AGING SYSTEM DESCRIPTION DOCUMENT

    Energy Technology Data Exchange (ETDEWEB)

    L.L. Swanson

    2005-04-06

    The purpose of this system description document (SDD) is to establish requirements that drive the design of the spent nuclear fuel (SNF) aging system and associated bases, which will allow the design effort to proceed. This SDD will be revised at strategic points as the design matures. This SDD identifies the requirements and describes the system design, as it currently exists, with emphasis on attributes of the design provided to meet the requirements. This SDD is an engineering tool for design control; accordingly, the primary audience and users are design engineers. This SDD is part of an iterative design process. It leads the design process with regard to the flow down of upper tier requirements onto the system. Knowledge of these requirements is essential in performing the design process. The SDD follows the design with regard to the description of the system. The description provided in the SDD reflects the current results of the design process. Throughout this SDD, the term aging cask applies to vertical site-specific casks and to horizontal aging modules. The term overpack is a vertical site-specific cask that contains a dual-purpose canister (DPC) or a disposable canister. Functional and operational requirements applicable to this system were obtained from ''Project Functional and Operational Requirements'' (F&OR) (Curry 2004 [DIRS 170557]). Other requirements that support the design process were taken from documents such as ''Project Design Criteria Document'' (PDC) (BSC 2004 [DES 171599]), ''Site Fire Hazards Analyses'' (BSC 2005 [DIRS 172174]), and ''Nuclear Safety Design Bases for License Application'' (BSC 2005 [DIRS 171512]). The documents address requirements in the ''Project Requirements Document'' (PRD) (Canori and Leitner 2003 [DIRS 166275]). This SDD includes several appendices. Appendix A is a Glossary; Appendix B is a list of key system charts

  3. Advisory processes and their descriptive data

    Directory of Open Access Journals (Sweden)

    Milan Mišovič

    2005-01-01

    Full Text Available Processes are regarded as a representative of all firm activities what is valid for Web-based Advisory Systems, too. Interpretation of processes from the both sides managers and informaticians is naturally different what is given by their scientific platforms and observed objectives. Managers have connected all firm processes with the firm prosperity and firm competition ability. Therefore they have followed understanding, modeling and regular improving of all processes what should stimulate and evoke using of process revisions (reengineering. The main role in such process understanding is thus committed to the firm management.The most professional computer process implementations are dominant objectives of Informaticians. In this conception all processes have been understood as real sequences of partial transactions (elementary firm activities and data processed by them regardless of using of a structural or object process approach modeling. The process and transaction models, submitted by informaticians, are connected with process content orientation. This content has to be programmed. The firm management represents the main resource of the process knowledge used by informaticians.In addition to these two process conceptions there is a different approach based on a process description by a descriptive data. The descriptive data are not oriented to a process content but to its theoretical conception and real implementation. The descriptive data processing inside special algebra operations can bring a lot of very important and easily economically interpreted results.

  4. Circumcision revision in male children

    Directory of Open Access Journals (Sweden)

    Mohammed A. Al-Ghazo

    2006-08-01

    Full Text Available OBJECTIVE: To determine indications for circumcision revision and to identify the specialty of the person who performed unsatisfactory primary circumcision. MATERIALS AND METHODS: The authors reviewed medical records of 52 cases that underwent circumcision revision over a 6-year period (1998 to 2004. Sleeve surgical technique was used for revision in patients with redundant foreskin or concealed penis, penoplasty for partial or complete degloving of the penis and meatotomy for external meatal stenosis. The mean age of children was 32 months (range 6 months to 9 years. RESULTS: Most of unsatisfactory primary circumcisions (86.7% were performed by laymen. All patients who underwent circumcision revision had good to excellent cosmetic results. CONCLUSION: Primary circumcision performed by laymen carry a high complication rate and serious complications may occur. A period of training and direct supervision by physicians is required before allowing laymen to perform circumcision independently.

  5. EPR first responders revision test

    International Nuclear Information System (INIS)

    2011-01-01

    In this revision test evaluates the acquired knowledge in case of radiological emergency confront. Actions to be taken in relation to people, equipment and the environment. Doses, radioactive sources, pollution

  6. Corporate Author Entries. Revision 5

    International Nuclear Information System (INIS)

    Hendricks, P.L.

    1986-05-01

    This reference authority has been created and is maintained to provide standard forms for recording the names of organizations consistently in bibliographic citations. This revision includes approximately 42,000 entries established since 1973

  7. How to Use Eric. Revised Edition.

    Science.gov (United States)

    Griffin, Louise

    This booklet defines the ERIC system and gives directions on the use of "Research in Education." It also tells about the Eric Document Reproduction Service (EDRS), its use, and its products. In addition, it tells what types of materials ERIC Clearinghouses process. A list of the 19 Clearinghouses, with a description of their specific interests and…

  8. Uranium hexafluoride: A manual of good practice ORO 651 revision 6

    Energy Technology Data Exchange (ETDEWEB)

    Dyer, R.H. [Department of Energy, Oak Ridge, TN (United States)

    1991-12-31

    The United States Department of Energy publishes a document containing UF{sub 6} handling procedures and descriptions of the approved UF{sub 6} cylinders. Since its initial publication in 1966, it has been frequently revised to provide more and better information. The principle additions to the sixth revision which will be discussed are: (1) more detail on the physical and chemical properties of UF{sub 6}; (2) cold trap description and operation; (3) cylinder emptying and filling concepts; (4) basis for cylinder fill limits; (5) short- and long-term cylinder storage; and (6) cylinder photographs and drawings showing major dimensions.

  9. Hardware description languages

    Science.gov (United States)

    Tucker, Jerry H.

    1994-01-01

    Hardware description languages are special purpose programming languages. They are primarily used to specify the behavior of digital systems and are rapidly replacing traditional digital system design techniques. This is because they allow the designer to concentrate on how the system should operate rather than on implementation details. Hardware description languages allow a digital system to be described with a wide range of abstraction, and they support top down design techniques. A key feature of any hardware description language environment is its ability to simulate the modeled system. The two most important hardware description languages are Verilog and VHDL. Verilog has been the dominant language for the design of application specific integrated circuits (ASIC's). However, VHDL is rapidly gaining in popularity.

  10. NRL Plasma Formulary. Revision

    Science.gov (United States)

    1990-01-01

    Description SI Gaussian 9B 1l0B Faraday’s law V x E -- V x E =-- at c Ot c9D 10D 4wr Ampere’s law V x H + J V x H =- + -J at c Ot c Poisson equation V - D = p...Froude Fr V/(g L) 1/ 2 t(Inertial force/gravitational or V/NL buoyancy force) 1 /2 Gay- Lussac Ga 1/fOAT Inverse of relative change in volume during... law heat coefficient, k = crAT0ax Volumetric expansion coefficient, dV/V = )3dT Bulk modulus (units kg m 1 s - 2) 6R, AV, Ap, AT Imposed difference in

  11. Hanford Waste Vitrification Plant: Preliminary description of waste form and canister

    International Nuclear Information System (INIS)

    Mitchell, D.E.

    1986-01-01

    In July 1985, the US Department of Energy's Office of Civilian Radioactive Waste Management established the Waste Acceptance Process as the means by which defense high-level waste producers, such as the Hanford Waste Vitrification Plant, will develop waste acceptance requirements with the candidate geologic repositories. A complete description of the Waste Acceptance Process is contained in the Preliminary Hanford Waste Vitrification Plant Waste Form Qualification Plan. The Waste Acceptance Process defines three documents that high-level waste producers must prepare as a part of the process of assuming that a high-level waste product will be acceptable for disposal in a geologic repository. These documents are the Description of Waste Form and Canister, Waste Compliance Plan, and Waste Qualification Report. This document is the Hanford Waste Vitrification Plant Preliminary Description of Waste Form and Canister for disposal of Neutralized Current Acid Waste. The Waste Acceptance Specifications for the Hanford Waste Vitrification Plant have not yet been developed, therefore, this document has been structured to corresponds to the Waste Acceptance Preliminary Specifications for the Defense Waste Processing Facility High-Level Waste Form. Not all of the information required by these specifications is appropriate for inclusion in this Preliminary Description of Waste Form and Canister. Rather, this description is limited to information that describes the physical and chemical characteristics of the expected high-level waste form. The content of the document covers three major areas: waste form characteristics, canister characteristics, and canistered waste form characteristics. This information will be used by the candidate geologic repository projects as the basis for preliminary repository design activities and waste form testing. Periodic revisions are expected as the Waste Acceptance Process progresses

  12. Information resource description creating and managing metadata

    CERN Document Server

    Hider, Philip

    2012-01-01

    An overview of the field of information organization that examines resource description as both a product and process of the contemporary digital environment.This timely book employs the unifying mechanism of the semantic web and the resource description framework to integrate the various traditions and practices of information and knowledge organization. Uniquely, it covers both the domain-specific traditions and practices and the practices of the ?metadata movement' through a single lens ? that of resource description in the broadest, semantic web sense.This approach more readily accommodate

  13. Revisioning Premodern Fine Art as Popular Visual Culture

    Science.gov (United States)

    Duncum, Paul

    2014-01-01

    Employing the concept of a rhetoric of emotions, European Premodern fine art is revisioned as popular culture. From ancient times, the rhetoric of emotion was one of the principle concepts informing the theory and practice of all forms of European cultural production, including the visual arts, until it was gradually displaced during the 1700s and…

  14. 76 FR 32113 - Revisions to the California State Implementation Plan

    Science.gov (United States)

    2011-06-03

    .... SUMMARY: EPA is proposing to approve revisions to the San Joaquin Valley Unified Air Pollution Control District (SJVUAPCD) and Imperial County Air Pollution Control District (ICAPCD) portions of the California... Motor Vehicle Assembly Coatings, Surface Coatings of Metal Parts and Products, Plastic Parts and...

  15. Integrated Data Collection Analysis (IDCA) Program: FY2011 Project Descriptions

    Energy Technology Data Exchange (ETDEWEB)

    Sandstrom, Mary M. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Brown, Geoffrey W. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Warner, Kirstin F. [Naval Surface Warfare Center (NSWC-IHD), Indian Head, MD (United States). Indian Head Division; Remmers, Daniel L. [Naval Surface Warfare Center (NSWC-IHD), Indian Head, MD (United States). Indian Head Division; Whinnery, LeRoy L. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Shelley, Timothy J. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Reyes, Jose A. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Hsu, Peter C. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Reynolds, John G. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2012-02-03

    This document provides brief descriptions of research topics for consideration by the IDCA for potential funding in funding in FY 2011. The topics include the utilization of the results from the Proficiency Test developed during FY 2010 to start populating the small-scale safety and thermal testing (SSST) Testing Compendium and revising results from methods modifications. Other research topics were also developed for FY 2011 from issues that arose in the Proficiency Test.

  16. Revised accident source terms for light-water reactors

    Energy Technology Data Exchange (ETDEWEB)

    Soffer, L. [Nuclear Regulatory Commission, Washington, DC (United States)

    1995-02-01

    This paper presents revised accident source terms for light-water reactors incorporating the severe accident research insights gained in this area over the last 15 years. Current LWR reactor accident source terms used for licensing date from 1962 and are contained in Regulatory Guides 1.3 and 1.4. These specify that 100% of the core inventory of noble gases and 25% of the iodine fission products are assumed to be instantaneously available for release from the containment. The chemical form of the iodine fission products is also assumed to be predominantly elemental iodine. These assumptions have strongly affected present nuclear air cleaning requirements by emphasizing rapid actuation of spray systems and filtration systems optimized to retain elemental iodine. A proposed revision of reactor accident source terms and some im implications for nuclear air cleaning requirements was presented at the 22nd DOE/NRC Nuclear Air Cleaning Conference. A draft report was issued by the NRC for comment in July 1992. Extensive comments were received, with the most significant comments involving (a) release fractions for both volatile and non-volatile species in the early in-vessel release phase, (b) gap release fractions of the noble gases, iodine and cesium, and (c) the timing and duration for the release phases. The final source term report is expected to be issued in late 1994. Although the revised source terms are intended primarily for future plants, current nuclear power plants may request use of revised accident source term insights as well in licensing. This paper emphasizes additional information obtained since the 22nd Conference, including studies on fission product removal mechanisms, results obtained from improved severe accident code calculations and resolution of major comments, and their impact upon the revised accident source terms. Revised accident source terms for both BWRS and PWRS are presented.

  17. Productivity

    DEFF Research Database (Denmark)

    Spring, Martin; Johnes, Geraint; Hald, Kim Sundtoft

    Productivity is increasingly critical for developed economies. It has always been important: as Paul Krugman puts it, “Productivity isn’t everything, but in the long run it is almost everything. A country’s ability to improve its standard of living over time depends almost entirely on its ability...... to raise its output per worker”(Krugman, 1994). Analyses of productivity have, by and large, been the preserve of economists. Operations Management (OM) is rooted in a similar concern for the efficient use of scarce resources; Management Accounting (MA) is concerned with the institutionalised measurement...... and management of productivity. Yet the three perspectives are rarely connected. This paper is a sketch of a literature review seeking to identify, contrast and reconcile these three perspectives. In so doing, it aims to strengthen the connections between policy and managerial analyses of productivity....

  18. Revision Hip Arthroscopy Indications and Outcomes: A Systematic Review.

    Science.gov (United States)

    Sardana, Vandit; Philippon, Marc J; de Sa, Darren; Bedi, Asheesh; Ye, Lily; Simunovic, Nicole; Ayeni, Olufemi R

    2015-10-01

    To identify the indications and outcomes in patients undergoing revision hip arthroscopy. The electronic databases Embase, Medline, HealthStar, and PubMed were searched from 1946 to July 19, 2014. Two blinded reviewers searched, screened, and evaluated the data quality of the studies using the Methodological Index for Non-Randomized Studies scale. Data were abstracted in duplicate. Agreement and descriptive statistics are presented. Six studies were included (3 prospective case series and 3 retrospective chart reviews), with a total of 448 hips examined. The most common indications for revision hip arthroscopy included residual femoroacetabular impingement (FAI), labral tears, and chondral lesions. The mean interval between revision arthroscopy and the index procedure was 25.6 months. Overall, the modified Harris Hip Score improved by a mean of 33.6% (19.3 points) from the baseline score at 1-year follow-up. In 14.6% of patients, further surgical procedures were required, including re-revision hip arthroscopy (8.0%), total hip replacement (5.6%), and hip resurfacing (1.0%). Female patients more commonly underwent revision hip arthroscopy (59.7%). The current evidence examined in this review supports revision hip arthroscopy as a successful intervention to improve functional outcomes (modified Harris Hip Score) and relieve pain in patients with residual symptoms after primary FAI surgery, although the outcomes are inferior when compared with a matched cohort of patients undergoing primary hip arthroscopy for FAI. The main indication for revision is a candidate who has symptoms due to residual cam- or pincer-type deformity that was either unaddressed or under-resected during the index operation. However, it is important to consider that the studies included in this review are of low-quality evidence. Surgeons should consider incorporating a minimum 2-year follow-up for individuals after index hip-preservation surgery because revisions tended to occur within this

  19. SNF/HLW Transfer System Description Document

    International Nuclear Information System (INIS)

    W. Holt

    2005-01-01

    The purpose of this system description document (SDD) is to establish requirements that drive the design of the spent nuclear fuel (SNF)/high-level radioactive waste (HLW) transfer system and associated bases, which will allow the design effort to proceed to license application. This SDD will be revised at strategic points as the design matures. This SDD identifies the requirements and describes the system design, as it currently exists, with emphasis on attributes of the design provided to meet the requirements. This SDD is an engineering tool for design control. Accordingly, the primary audience and users are design engineers. This SDD is part of an iterative design process. It leads the design process with regard to the flowdown of upper tier requirements onto the system. Knowledge of these requirements is essential in performing the design process. The SDD follows the design with regard to the description of the system. The description provided in this SDD reflects the current results of the design process

  20. 78 FR 73692 - Revisions to Safety Standards for Infant Bath Seats, Toddler Beds, and Full-Size Baby Cribs

    Science.gov (United States)

    2013-12-09

    ... standard issued under the Danny Keysar Child Product Safety Notification Act was based, the revision... standard. Section 26(c) of the CPSA also provides that states or political subdivisions of states may apply... CONSUMER PRODUCT SAFETY COMMISSION 16 CFR Parts 1215, 1217 and 1219 Revisions to Safety Standards...

  1. Olkiluoto site description 2011

    International Nuclear Information System (INIS)

    2012-12-01

    This fourth version of the Olkiluoto Site Report, produced by the OMTF (Olkiluoto Modelling Task Force), updates the Olkiluoto Site Report 2008 with the data and knowledge obtained up to December 2010. A descriptive model of the site (the Site Descriptive Model, SDM), i.e. a model describing the geological and hydrogeological structure of the site, properties of the bedrock and the groundwater and its flow, and the associated interacting processes and mechanisms. The SDM is divided into six parts: surface system, geology, rock mechanics, hydrogeology, hydrogeochemistry and transport properties

  2. Olkiluoto site description 2011

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-12-15

    This fourth version of the Olkiluoto Site Report, produced by the OMTF (Olkiluoto Modelling Task Force), updates the Olkiluoto Site Report 2008 with the data and knowledge obtained up to December 2010. A descriptive model of the site (the Site Descriptive Model, SDM), i.e. a model describing the geological and hydrogeological structure of the site, properties of the bedrock and the groundwater and its flow, and the associated interacting processes and mechanisms. The SDM is divided into six parts: surface system, geology, rock mechanics, hydrogeology, hydrogeochemistry and transport properties.

  3. Biosphere data base revision

    International Nuclear Information System (INIS)

    Bergstroem, U.; Andersson, K.; Sundblad, B.

    1985-12-01

    The turnover of long-lived radionuclides in the biosphere has been modelled some time ago and the exposure to man was calculated. The nuclides were long-lived actinides and fission products leaking from a simulated deep rock repository for spent nuclear fuel. The data base for these calculations has been updated in the present work and in addition a number of nuclides that were not included in the earlier work have been treated. (G.B.)

  4. Quantum interaction. Revised selected papers

    Energy Technology Data Exchange (ETDEWEB)

    Song, Dawei; Zhang, Peng; Wang, Lei [Aberdeen Univ. (United Kingdom). School of Computing; Melucci, Massimo [Padua Univ., Padova (Italy). Dept. of Information Engineering; Frommholz, Ingo [Bedfordshire Univ. (United Kingdom); Arafat, Sachi (eds.) [Glasgow Univ. (United Kingdom). School of Computing Science

    2011-07-01

    This book constitutes the thoroughly refereed post-conference proceedings of the 5th International Symposium on Quantum Interaction, QI 2011, held in Aberdeen, UK, in June 2011. The 26 revised full papers and 6 revised poster papers, presented together with 1 tutorial and 1 invited talk were carefully reviewed and selected from numerous submissions during two rounds of reviewing and improvement. The papers show the cross-disciplinary nature of quantum interaction covering topics such as computation, cognition, mechanics, social interaction, semantic space and information representation and retrieval. (orig.)

  5. HEDR modeling approach: Revision 1

    International Nuclear Information System (INIS)

    Shipler, D.B.; Napier, B.A.

    1994-05-01

    This report is a revision of the previous Hanford Environmental Dose Reconstruction (HEDR) Project modeling approach report. This revised report describes the methods used in performing scoping studies and estimating final radiation doses to real and representative individuals who lived in the vicinity of the Hanford Site. The scoping studies and dose estimates pertain to various environmental pathways during various periods of time. The original report discussed the concepts under consideration in 1991. The methods for estimating dose have been refined as understanding of existing data, the scope of pathways, and the magnitudes of dose estimates were evaluated through scoping studies

  6. Quantum interaction. Revised selected papers

    International Nuclear Information System (INIS)

    Song, Dawei; Zhang, Peng; Wang, Lei; Arafat, Sachi

    2011-01-01

    This book constitutes the thoroughly refereed post-conference proceedings of the 5th International Symposium on Quantum Interaction, QI 2011, held in Aberdeen, UK, in June 2011. The 26 revised full papers and 6 revised poster papers, presented together with 1 tutorial and 1 invited talk were carefully reviewed and selected from numerous submissions during two rounds of reviewing and improvement. The papers show the cross-disciplinary nature of quantum interaction covering topics such as computation, cognition, mechanics, social interaction, semantic space and information representation and retrieval. (orig.)

  7. Medical writing, revising and editing

    DEFF Research Database (Denmark)

    Pilegaard, Morten

    2006-01-01

    The globalization of science makes medical writing, editing and revision a rapidly growing field of linguistic study and practice. Medical science texts are written according to uniform, general guidelines and medical genres have become highly conventionalized in terms of structure and linguistic...... form. Medical editing often takes the form of peer review and mainly addresses issues of contents and overall validity. Medical revision incorporates the checking of the macrostructure and the microstructure of the text, its language and style and its suitability for the target reader or client...

  8. Revising Nabokov Revising”

    Directory of Open Access Journals (Sweden)

    Marie Bouchet

    2010-10-01

    Full Text Available Nabokov revised his works as he translated them and, on another plane, canon revisionism has been having its backlash and provoked other refracting waves. The purpose of the conference was to advance Nabokov studies through the discussion of how our view of Nabokov’s standing and his works today should be revised, especially after the publication of The Original of Laura. However the conference was not confined to just this theme, since “revising” is a word rich with implications. To borrow s...

  9. Calculation code revised MIXSET for Purex process

    International Nuclear Information System (INIS)

    Gonda, Kozo; Oka, Koichiro; Fukuda, Shoji.

    1979-02-01

    Revised MIXSET is a FORTRAN IV calculation code developed to simulate steady and transient behaviors of the Purex extraction process and calculate the optimum operating condition of the process. Revised MIXSET includes all the functions of MIXSET code as shown below. a) Maximum chemical system of eight components can be handled with or without mutual dependence of the distribution of components. b) The flowrate and concentration of feed can be renewed successively at any state, transient or steady, for searching optimum operating conditions. c) Optimum inputs of feed concentrations and flowrates can be calculated to satisfy both of specification and recovery rate of a product. d) Radioactive decay reactions can be handled on each component. Besides these functions, the following chemical reactions concerned in Purex process are newly-included in Revised MIXSET code and the quantitative changes of components such as H + , U(IV), U(VI), Pu(III), Pu(IV), NH 2 OH, N 2 H 4 can be simulated. 1st Gr. (i) reduction of Pu(IV); U 4+ + 2Pu 4+ + 2H 2 O → UO 2 2+ + 2Pu 3+ + 4H + . (ii) oxidation of Pu(III); 2Pu 3+ + 3H + + NO 3 - → 2Pu 4+ + HNO 2 + H 2 O. (iii) oxidation of U(IV); U 4+ + NO 3 - + H 2 O → UO 2 2+ + H + + HNO 2 2U 4+ + O 2 + 2H 2 O → 2UO 2 2+ + 4H + . (iv) decomposition of HNO 2 ; HNO 2 + N 2 H 5 + → HN 3 + 2H 2 O + H + . (author)

  10. Failure of aseptic revision total knee arthroplasties.

    Science.gov (United States)

    Leta, Tesfaye H; Lygre, Stein Håkon L; Skredderstuen, Arne; Hallan, Geir; Furnes, Ove

    2015-02-01

    In Norway, the proportion of revision knee arthroplasties increased from 6.9% in 1994 to 8.5% in 2011. However, there is limited information on the epidemiology and causes of subsequent failure of revision knee arthroplasty. We therefore studied survival rate and determined the modes of failure of aseptic revision total knee arthroplasties. This study was based on 1,016 aseptic revision total knee arthroplasties reported to the Norwegian Arthroplasty Register between 1994 and 2011. Revisions done for infections were not included. Kaplan-Meier and Cox regression analyses were used to assess the survival rate and the relative risk of re-revision with all causes of re-revision as endpoint. 145 knees failed after revision total knee arthroplasty. Deep infection was the most frequent cause of re-revision (28%), followed by instability (26%), loose tibial component (17%), and pain (10%). The cumulative survival rate for revision total knee arthroplasties was 85% at 5 years, 78% at 10 years, and 71% at 15 years. Revision total knee arthroplasties with exchange of the femoral or tibial component exclusively had a higher risk of re-revision (RR = 1.7) than those with exchange of the whole prosthesis. The risk of re-revision was higher for men (RR = 2.0) and for patients aged less than 60 years (RR = 1.6). In terms of implant survival, revision of the whole implant was better than revision of 1 component only. Young age and male sex were risk factors for re-revision. Deep infection was the most frequent cause of failure of revision of aseptic total knee arthroplasties.

  11. Descriptive data analysis.

    Science.gov (United States)

    Thompson, Cheryl Bagley

    2009-01-01

    This 13th article of the Basics of Research series is first in a short series on statistical analysis. These articles will discuss creating your statistical analysis plan, levels of measurement, descriptive statistics, probability theory, inferential statistics, and general considerations for interpretation of the results of a statistical analysis.

  12. Osiris reactor descriptive report

    International Nuclear Information System (INIS)

    1976-03-01

    OSIRIS is a swimming pool reactor of 70 MW thermal power. Its main purpose is the irradiation of reactor materials in high neutron flux. A description is given of the air conditioning, ventilation, and radioactive gas removal system. (R.L.)

  13. Plot Description (PD)

    Science.gov (United States)

    Robert E. Keane

    2006-01-01

    The Plot Description (PD) form is used to describe general characteristics of the FIREMON macroplot to provide ecological context for data analyses. The PD data characterize the topographical setting, geographic reference point, general plant composition and cover, ground cover, fuels, and soils information. This method provides the general ecological data that can be...

  14. Generalizing: The descriptive struggle

    Directory of Open Access Journals (Sweden)

    Barney G. Glaser, Ph.D.; Hon Ph.D.

    2006-11-01

    Full Text Available The literature is not kind to the use of descriptive generalizations. Authors struggle and struggle to find and rationalize a way to use them and then fail in spite of trying a myriad of work-arounds. And then we have Lincoln and Guba’s famous statement: “The only generalization is: there is no generalization” in referring to qualitative research. (op cit, p. 110 They are referring to routine QDA yielding extensive descriptions, but which tacitly include conceptual generalizations without any real thought of knowledge about them. In this chapter I wish to explore this struggle for the purpose of explaining that the various contra arguments to using descriptive generalizations DO NOT apply to the ease of using conceptual generalizations yielded in SGT and especially FGT. I will not argue for the use of descriptive generalization. I agree with Lincoln and Guba with respect to QDA, “the only generalization is: there is no generalization.” It is up to the QDA methodologists, of whom there are many; to continue the struggle and I wish them well.

  15. Fractal description of fractures

    International Nuclear Information System (INIS)

    Lung, C.W.

    1991-06-01

    Recent studies on the fractal description of fractures are reviewed. Some problems on this subject are discussed. It seems hopeful to use the fractal dimension as a parameter for quantitative fractography and to apply fractal structures to the development of high toughness materials. (author). 28 refs, 7 figs

  16. Tore Supra: technical description

    International Nuclear Information System (INIS)

    1985-08-01

    This report is aimed, after a brief recall of physics and technologic perspectives of Tore Supra, at giving a detailed description of the basic machine; details of each component are defined. Volume 1 is specifically concerned with the general aspects of Tore Supra and the toroidal field system [fr

  17. Draft revision of human factors guideline HF-010

    International Nuclear Information System (INIS)

    Lee, Hyun Chul; Lee, Yong Hee; Oh, In Seok; Lee, Jung Woon; Cha, Woo Chang; Lee, Dhong Ha

    2003-05-01

    The Application of Human Factors to the design of Man-Machine Interfaces System(MMIS) in the nuclear power plant is essential to the safety and productivity of the nuclear power plants, human factors standards and guidelines as well as human factors analysis methods and experiments are weightily used to the design application. A Korean engineering company has developed a human factors engineering guideline, so-call HF-010, and has used it for human factors design, however the revision of HF-010 is necessary owing to lack of the contents related to the advanced MMI(Man-Machine Interfaces). As the results of the reviews of HF-010, it is found out that the revision of Section 9. Computer Displays of HF-010 is urgent, thus the revision was drafted on the basis of integrated human factors design guidelines for VDT, human factors design guidelines for PMAS SPADES display, human factors design guidelines for PMAS alarm display, and human factors design guidelines for electronic displays developed by the surveillance and operation support project of KOICS. The draft revision of HF-010 Section 9 proposed in this report can be utilized for the human factors design of the advanced MMI, and the high practical usability of the draft can be kept up through the continuous revision according to the advancement of digital technology

  18. Revision of Boletus section Appendiculati (Boletaceae) in Bulgaria with a key to the Balkan species

    OpenAIRE

    ASSYOV, Boris

    2012-01-01

    The paper presents the results from the taxonomic revision of Boletus section Appendiculati in Bulgaria. Descriptions are provided based on Bulgarian specimens for the 5 species of the section: Boletus appendiculatus, B. fechtneri, B. fuscoroseus, B. regius, and B. subappendiculatus. The priority of the name B. fuscoroseus against B. pseudoregius is briefly discussed. A dichotomous key for the determination of members is also included.

  19. The nuclear liability conventions revised

    International Nuclear Information System (INIS)

    Reyners, P.

    2004-01-01

    The signature on 12 February 2004 of the Protocols amending respectively the 1960 Paris Convention and the 1963 Brussels Supplementary Convention was the second step of the process of modernisation of the international nuclear liability regime after the adoption in September 1997 of a Protocol revising the 1963 Vienna Convention and of a new Convention on Supplementary Compensation for Nuclear Damage. The common objective of the new instruments is to provide more funds to compensate a larger number of potential victims in respect of a broader range of damage. Another goal of the revision exercise was to maintain the compatibility between the Paris and Vienna based systems, a commitment enshrined in the 1988 Joint Protocol, as well as to ascertain that Paris/Brussels countries could also become a Party to the Convention on Supplementary Compensation. However, while generally consistent vis a vis the Joint Protocol, the provisions of the Paris and Vienna Conventions, as revised, differ on some significant aspects. Another remaining issue is whether the improved international nuclear liability regime will succeed in attracting in the future a larger number of countries, particularly outside Europe, and will so become truly universal. Therefore, the need for international co-operation to address these issues, to facilitate the adoption of new implementing legislation and to ensure that this special regime keeps abreast of economic and technological developments, is in no way diminished after the revision of the Conventions.(author)

  20. Concise revision of the Sarcospermataceae

    NARCIS (Netherlands)

    Lam, H.J.; Royen, van P.

    1952-01-01

    After the senior writer, together with W. W. Varossieau, had published a revision of this monogeneric family (Blumea III, 1938—’39 and IV, 1941), some more material has been examined by us and, moreover, some new species have been described. Thanks to the courtesy of Prof. F. Gagnepain of Paris, and

  1. Guidelines for Curriculum Development. Revised.

    Science.gov (United States)

    Kistler, K.; And Others

    The curriculum development process explained in this booklet was first implemented at College of the Redwoods in May 1986 and then revised in June 1989. First, information on the college's Curriculum Committee is provided, indicating that the committee was formed to plan credit/non-credit courses; evaluate and approve additions, modifications, or…

  2. Revised Accounting for Business Combinations

    Science.gov (United States)

    Wilson, Arlette C.; Key, Kimberly

    2008-01-01

    The Financial Accounting Standards Board (FASB) has recently issued Statement of Financial Accounting Standards No. 141 (Revised 2007) Business Combinations. The object of this Statement is to improve the relevance, representational faithfulness, and comparability of reported information about a business combination and its effects. This Statement…

  3. How Adults Learn. Revised Edition.

    Science.gov (United States)

    Kidd, J. R.

    The book's emphasis is on learning during the years of adulthood and examines present-day practice of adult education for practitioners. This revised edition brings up to date advances in such areas of learning as controversial theory; the effects of environment; sensory processes; intellectual capacities; motivation and attitude; transactional…

  4. A revision of the Paronychiinae

    NARCIS (Netherlands)

    Chaudhri, Mohammad Nazeer

    1968-01-01

    This study was undertaken, in April 1964, at the suggestion of Prof. Dr. J. Lanjouw. The need for such a revision, was, however, stressed by the authors of the subtribe, viz. PAX et K. HOFFMANN, who, while delimiting these genera, remarked that the Systematics of both the (main) genera of this

  5. Diet History Questionnaire: Database Revision History

    Science.gov (United States)

    The following details all additions and revisions made to the DHQ nutrient and food database. This revision history is provided as a reference for investigators who may have performed analyses with a previous release of the database.

  6. [Revised practice guideline 'Anaemia in midwifery practice'

    NARCIS (Netherlands)

    Beentjes, M.; Jans, S.M.P.J.

    2012-01-01

    The practice guideline of the Royal Dutch Organization of Midwives 'Anaemia in primary care midwifery practice' published in 2000, has recently been revised. The revised guideline takes physiological haemodilution during pregnancy into consideration and provides gestation specific reference values

  7. Revised Human Health Risk Assessment on Chlorpyrifos

    Science.gov (United States)

    We have revised our human health risk assessment and drinking water exposure assessment for chlorpyrifos that supported our October 2015 proposal to revoke all food residue tolerances for chlorpyrifos. Learn about the revised analysis.

  8. 75 FR 60485 - NRC Enforcement Policy Revision

    Science.gov (United States)

    2010-09-30

    ... NUCLEAR REGULATORY COMMISSION [NRC-2008-0497] NRC Enforcement Policy Revision AGENCY: Nuclear Regulatory Commission. ACTION: Policy statement. SUMMARY: The Nuclear Regulatory Commission (NRC or Commission) is publishing a major revision to its Enforcement Policy (Enforcement Policy or Policy) to...

  9. 76 FR 71886 - Revisions to the California State Implementation Plan, Placer County Air Pollution Control...

    Science.gov (United States)

    2011-11-21

    ...EPA is taking direct final action to approve revisions to the Placer County Air Pollution Control District (PCAPCD) and Sacramento Metropolitan Air Quality Management District (SMAQMD) portions of the California State Implementation Plan (SIP). These revisions concern volatile organic compound (VOC) emissions from coatings and strippers used on wood products, wood paneling, and miscellaneous metal parts and products. We are approving these local rules that regulate these emission sources under the Clean Air Act as amended in 1990 (CAA or the Act).

  10. 76 FR 71922 - Revisions to the California State Implementation Plan, Placer County Air Pollution Control...

    Science.gov (United States)

    2011-11-21

    ...EPA is proposing to approve revisions to the Placer County Air Pollution Control District (PCAPCD) and Sacramento Metropolitan Air Quality Management District (SMAQMD) portion of the California State Implementation Plan (SIP). These revisions concern volatile organic compound (VOC) emissions from coatings and strippers used on wood products, wood paneling, and miscellaneous metal parts and products. We are proposing to approve three local rules to regulate these emission sources under the Clean Air Act as amended in 1990 (CAA or the Act).

  11. Revised spatially distributed global livestock emissions

    Science.gov (United States)

    Asrar, G.; Wolf, J.; West, T. O.

    2015-12-01

    Livestock play an important role in agricultural carbon cycling through consumption of biomass and emissions of methane. Quantification and spatial distribution of methane and carbon dioxide produced by livestock is needed to develop bottom-up estimates for carbon monitoring. These estimates serve as stand-alone international emissions estimates, as input to global emissions modeling, and as comparisons or constraints to flux estimates from atmospheric inversion models. Recent results for the US suggest that the 2006 IPCC default coefficients may underestimate livestock methane emissions. In this project, revised coefficients were calculated for cattle and swine in all global regions, based on reported changes in body mass, quality and quantity of feed, milk production, and management of living animals and manure for these regions. New estimates of livestock methane and carbon dioxide emissions were calculated using the revised coefficients and global livestock population data. Spatial distribution of population data and associated fluxes was conducted using the MODIS Land Cover Type 5, version 5.1 (i.e. MCD12Q1 data product), and a previously published downscaling algorithm for reconciling inventory and satellite-based land cover data at 0.05 degree resolution. Preliminary results for 2013 indicate greater emissions than those calculated using the IPCC 2006 coefficients. Global total enteric fermentation methane increased by 6%, while manure management methane increased by 38%, with variation among species and regions resulting in improved spatial distributions of livestock emissions. These new estimates of total livestock methane are comparable to other recently reported studies for the entire US and the State of California. These new regional/global estimates will improve the ability to reconcile top-down and bottom-up estimates of methane production as well as provide updated global estimates for use in development and evaluation of Earth system models.

  12. Humeral windows in revision total elbow arthroplasty.

    Science.gov (United States)

    Peach, Chris A; Salama, Amir; Stanley, David

    2016-04-01

    The use of cortical windows for revision elbow arthroplasty has not previously been widely reported. Their use aids safe revision of a well fixed humeral prosthesis and can be used in the setting of dislocation, periprosthetic fracture or aseptic loosening of the ulnar component. We describe our technique and results of cortical windows in the distal humerus for revision elbow arthroplasty surgery.

  13. A taxonomic revision of the genus Podocarpus

    NARCIS (Netherlands)

    Laubenfels, de D.J.

    1985-01-01

    In connection with the forthcoming revision of the Coniferae for the Flora Malesiana, the author thought it necessary to revise the genus Podocarpus. Although this genus has a substantial representation in Malesia (30 species), the revision is too involved to be appropriate with the Flora Malesiana

  14. 24 CFR 968.225 - Budget revisions.

    Science.gov (United States)

    2010-04-01

    ... 24 Housing and Urban Development 4 2010-04-01 2010-04-01 false Budget revisions. 968.225 Section... Fewer Than 250 Units) § 968.225 Budget revisions. (a) A PHA shall not incur any modernization cost in excess of the total HUD-approved CIAP budget. A PHA shall submit a budget revision, in a form prescribed...

  15. 7 CFR 3015.115 - Budget revisions.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 15 2010-01-01 2010-01-01 false Budget revisions. 3015.115 Section 3015.115..., DEPARTMENT OF AGRICULTURE UNIFORM FEDERAL ASSISTANCE REGULATIONS Programmatic Changes and Budget Revisions § 3015.115 Budget revisions. (a) Nonconstruction projects. (1) Except as provided in paragraph (a)(2) of...

  16. 48 CFR 15.307 - Proposal revisions.

    Science.gov (United States)

    2010-10-01

    ... AND CONTRACT TYPES CONTRACTING BY NEGOTIATION Source Selection 15.307 Proposal revisions. (a) If an... allow proposal revisions to clarify and document understandings reached during negotiations. At the... submit a final proposal revision. The contracting officer is required to establish a common cut-off date...

  17. Refined reservoir description to maximize oil recovery

    International Nuclear Information System (INIS)

    Flewitt, W.E.

    1975-01-01

    To assure maximized oil recovery from older pools, reservoir description has been advanced by fully integrating original open-hole logs and the recently introduced interpretive techniques made available through cased-hole wireline saturation logs. A refined reservoir description utilizing normalized original wireline porosity logs has been completed in the Judy Creek Beaverhill Lake ''A'' Pool, a reefal carbonate pool with current potential productivity of 100,000 BOPD and 188 active wells. Continuous porosity was documented within a reef rim and cap while discontinuous porous lenses characterized an interior lagoon. With the use of pulsed neutron logs and production data a separate water front and pressure response was recognized within discrete environmental units. The refined reservoir description aided in reservoir simulation model studies and quantifying pool performance. A pattern water flood has now replaced the original peripheral bottom water drive to maximize oil recovery

  18. Geometry The Language of Space and Form (Revised Edition)

    CERN Document Server

    Tabak, John

    2011-01-01

    Geometry, Revised Edition describes geometry in antiquity. Beginning with a brief description of some of the geometry that preceded the geometry of the Greeks, it takes up the story of geometry during the European Renaissance as well as the significant mathematical progress in other areas of the world. It also discusses the analytic geometry of Ren Descartes and Pierre Fermat, the alternative coordinate systems invented by Isaac Newton, and the solid geometry of Leonhard Euler. Also included is an overview of the geometry of one of the most successful mathematicians of the 19th century, Bernha

  19. RETRIEVAL EQUIPMENT DESCRIPTIONS

    International Nuclear Information System (INIS)

    J. Steinhoff

    1997-01-01

    The objective and the scope of this document are to list and briefly describe the major mobile equipment necessary for waste package (WP) retrieval from the proposed subsurface nuclear waste repository at Yucca Mountain. Primary performance characteristics and some specialized design features of the equipment are explained and summarized in the individual subsections of this document. There are no quality assurance requirements or QA controls in this document. Retrieval under normal conditions is accomplished with the same fleet of equipment as is used for emplacement. Descriptions of equipment used for retrieval under normal conditions is found in Emplacement Equipment Descriptions, DI: BCAF00000-01717-5705-00002 (a document in progress). Equipment used for retrieval under abnormal conditions is addressed in this document and consists of the following: (1) Inclined Plane Hauler; (2) Bottom Lift Transporter; (3) Load Haul Dump (LHD) Loader; (4) Heavy Duty Forklift for Emplacement Drifts; (5) Covered Shuttle Car; (6) Multipurpose Vehicle; and (7) Scaler

  20. Multidimensional nonlinear descriptive analysis

    CERN Document Server

    Nishisato, Shizuhiko

    2006-01-01

    Quantification of categorical, or non-numerical, data is a problem that scientists face across a wide range of disciplines. Exploring data analysis in various areas of research, such as the social sciences and biology, Multidimensional Nonlinear Descriptive Analysis presents methods for analyzing categorical data that are not necessarily sampled randomly from a normal population and often involve nonlinear relations. This reference not only provides an overview of multidimensional nonlinear descriptive analysis (MUNDA) of discrete data, it also offers new results in a variety of fields. The first part of the book covers conceptual and technical preliminaries needed to understand the data analysis in subsequent chapters. The next two parts contain applications of MUNDA to diverse data types, with each chapter devoted to one type of categorical data, a brief historical comment, and basic skills peculiar to the data types. The final part examines several problems and then concludes with suggestions for futu...

  1. TMACS system description

    International Nuclear Information System (INIS)

    Scaief, C.C.

    1995-01-01

    This document provides a description of the Tank Monitor and Control System (TMACS). It is intended as an introduction for those persons unfamiliar with the system as well as a reference document for the users, maintenance personnel, and system designers. In addition to describing the system, the document outlines the associated drawing documentation, provides maintenance and spare parts information, and discusses other TMACS documents that provide additional detail

  2. Input description for BIOPATH

    International Nuclear Information System (INIS)

    Marklund, J.E.; Bergstroem, U.; Edlund, O.

    1980-01-01

    The computer program BIOPATH describes the flow of radioactivity within a given ecosystem after a postulated release of radioactive material and the resulting dose for specified population groups. The present report accounts for the input data necessary to run BIOPATH. The report also contains descriptions of possible control cards and an input example as well as a short summary of the basic theory.(author)

  3. A revision of the family Cerococcidae Balachowsky (Hemiptera: Sternorrhyncha, Coccomorpha) with particular reference to species from the Afrotropical, western Palaearctic and western Oriental Regions, with the revival of Antecerococcus Green and description of a new genus and fifteen new species, and with ten new synonomies.

    Science.gov (United States)

    Hodgson, Chris J; Williams, Douglas J

    2016-03-14

    The scale insect family Cerococcidae (Hemiptera: Coccomorpha) or false pit scales was last revised during the 1970s and 1980s. At that time, it included three genera, Asterococcus Borchsenius, Cerococcus Comstock and Solenophora Maskell, and a total of 69 species. The present revision concentrates on species known from the western Palaearctic, western Oriental and Afrotropical Regions but includes notes on all known cerococcid species. Within the three geographical areas principally studied here, all known species are described and illustrated based on the adult females, including 13 new species. During this study, a new morphological character was discovered on the venter of the anal lobes that is taxonomically important and which is referred to as the anteroventral sclerotization. It was found that the anteroventral sclerotization was present in most species from the main study areas, but was absent from all species in the Nearctic and from many in the Australasian and Neotropical Regions as well. As the type species of Cerococcus is C. quercus Comstock from the Nearctic, the genus Antecerococcus Green, revived status (type species Cerococcus punctiferus Green) was resurrected to take all species with an anteroventral sclerotization. Resurrection of Antecerococcus means that names of genera previously synonymised with Cerococcus are now junior synonyms of Antecerococcus, e.g., Phenacobryum Cockerell, syn. nov., Amelococcus Marchal, syn. nov., Cercococcus Scott, syn. nov. and Coricoccus Mahdihassan, syn. nov. As a range of other characters also were found to support this division (such as absence of setae along inner margin of each anal lobe and presence of a ventral seta posteriorly on each lobe), the genera in Cerococcidae can be divided into two groups, those with an anteroventral sclerotization (Antecerococcus and probably Solenophora) and those without (Asterococcus and Cerococcus). As part of this revision, it was found necessary to consider the

  4. XML Diagnostics Description Standard

    International Nuclear Information System (INIS)

    Neto, A.; Fernandes, H.; Varandas, C.; Lister, J.; Yonekawa, I.

    2006-01-01

    A standard for the self-description of fusion plasma diagnostics will be presented, based on the Extensible Markup Language (XML). The motivation is to maintain and organise the information on all the components of a laboratory experiment, from the hardware to the access security, to save time and money when problems arises. Since there is no existing standard to organise this kind of information, every Association stores and organises each experiment in different ways. This can lead to severe problems when the organisation schema is poorly documented or written in national languages. The exchange of scientists, researchers and engineers between laboratories is a common practice nowadays. Sometimes they have to install new diagnostics or to update existing ones and frequently they lose a great deal of time trying to understand the currently installed system. The most common problems are: no documentation available; the person who understands it has left; documentation written in the national language. Standardisation is the key to solving all the problems mentioned. From the commercial information on the diagnostic (component supplier; component price) to the hardware description (component specifications; drawings) to the operation of the equipment (finite state machines) through change control (who changed what and when) and internationalisation (information at least in the native language and in English), a common XML schema will be proposed. This paper will also discuss an extension of these ideas to the self-description of ITER plant systems, since the problems will be identical. (author)

  5. Management control system description

    Energy Technology Data Exchange (ETDEWEB)

    Bence, P. J.

    1990-10-01

    This Management Control System (MCS) description describes the processes used to manage the cost and schedule of work performed by Westinghouse Hanford Company (Westinghouse Hanford) for the US Department of Energy, Richland Operations Office (DOE-RL), Richland, Washington. Westinghouse Hanford will maintain and use formal cost and schedule management control systems, as presented in this document, in performing work for the DOE-RL. This MCS description is a controlled document and will be modified or updated as required. This document must be approved by the DOE-RL; thereafter, any significant change will require DOE-RL concurrence. Westinghouse Hanford is the DOE-RL operations and engineering contractor at the Hanford Site. Activities associated with this contract (DE-AC06-87RL10930) include operating existing plant facilities, managing defined projects and programs, and planning future enhancements. This document is designed to comply with Section I-13 of the contract by providing a description of Westinghouse Hanford's cost and schedule control systems used in managing the above activities. 5 refs., 22 figs., 1 tab.

  6. The Revised Academic Consensus Definition of Terrorism

    Directory of Open Access Journals (Sweden)

    Alex P. Schmid

    2012-05-01

    Full Text Available Terrorism is a contested concept. While there are many national and regional definitions, there is no universal legal definition approved by the General Assembly of the United Nations (the one proposed by the Security Council in Res. 1566 (2004 is non-binding, lacking legal authority in international law. The Ad Hoc Committee on Terrorism of the 6th (legal Committee of the General Assembly has, with some interruptions, been trying to reach a legal definition since 1972 - but in vain. In the absence of a legal definition, attempts have been made since the 1980s to reach agreement on an academic consensus definition. The latest outcome is the revised definition reprinted below. It is the result of three rounds of consultations among academics and other professionals. A description how it was arrived at can be found on pp. 39 - 98 of Alex P. Schmid (Ed.. The Routledge Handbook of Terrorism Research. London and New York: Routledge, 2011. The same volume also contains 260 other definitions compiled by Joseph J. Easson and Alex P. Schmid on pp. 99 -200.

  7. Evaluating the Chinese Revised Controlling Behaviors Scale.

    Science.gov (United States)

    Tiwari, Agnes; Fong, Daniel Yee Tak; Chan, Ko Ling; Yan, Elsie Chau Wai; Lam, Gloria Ling Lee; Tang, Debbie Hoi Ming; Graham-Kevan, Nicola

    2015-01-01

    The present study evaluated the utility of the Chinese version of the Revised Controlling Behaviors Scale (C-CBS-R) as a measure of controlling behaviors in violent Chinese intimate relationships. Using a mixed-methods approach, in-depth, individual interviews were conducted with 200 Chinese women survivors to elicit qualitative data about their personal experiences of control in intimate relationships. The use of controlling behaviors was also assessed using the C-CBS-R. Interview accounts suggested that the experiences of 91 of the women were consistent with the description of coercive control according to Dutton and Goodman's conceptualization of coercion. Using the split-half validation procedure, a receiver operating characteristics (ROC) curve analysis was conducted with the first half of the sample. The area under the curve (AUC) for using the C-CBS-R to identify high control was .99, and the cutoff score of 1.145 maximized both sensitivity and specificity. Applying the cutoff score to the second half gave a sensitivity of 96% and a specificity of 95%. Overall, the C-CBS-R has demonstrated utility as a measure of controlling behaviors with a cutoff score for distinguishing high from low levels of control in violent Chinese intimate relationships. © The Author(s) 2014.

  8. Taxonomic revision of Pachyptera (Bignonieae, Bignoniaceae

    Directory of Open Access Journals (Sweden)

    Jessica Nayara Carvalho Francisco

    2018-01-01

    Full Text Available Pachyptera DC. is a small genus of neotropical lianas included in tribe Bignonieae (Bignoniaceae. The genus has a complicated taxonomic history but currently includes species distributed from Belize to Southern Amazon. Pachyptera is characterised by four main synapomorphies, namely, a papery peeling bark, prophylls of the axillary buds organised in a series of three, patelliform glands arranged in lines in the upper portions of the calyx and corolla tube. Furthermore, members of the genus also have stems with four phloem wedges in cross-section and conspicuous extrafloral nectaries between the interpetiolar region and at the petiole apex, although these characters are also shared with other genera of tribe Bignonieae. Here, we present a taxonomic revision of Pachyptera, which includes a complete list of synonyms, detailed morphological descriptions of species and an identification key, as well as information on the habitat, distribution and phenology, nomenclatural notes, taxonomic comments and illustrations of all the species. In addition, we designate three lectotypes, propose one new combination, raise one variety to species status and describe a new species. After these adjustments, a Pachyptera with five well-defined species is recognised.

  9. Taxonomic revision of Pachyptera (Bignonieae, Bignoniaceae).

    Science.gov (United States)

    Francisco, Jessica Nayara Carvalho; Lohmann, Lúcia G

    2018-01-01

    Pachyptera DC. is a small genus of neotropical lianas included in tribe Bignonieae (Bignoniaceae). The genus has a complicated taxonomic history but currently includes species distributed from Belize to Southern Amazon. Pachyptera is characterised by four main synapomorphies, namely, a papery peeling bark, prophylls of the axillary buds organised in a series of three, patelliform glands arranged in lines in the upper portions of the calyx and corolla tube. Furthermore, members of the genus also have stems with four phloem wedges in cross-section and conspicuous extrafloral nectaries between the interpetiolar region and at the petiole apex, although these characters are also shared with other genera of tribe Bignonieae. Here, we present a taxonomic revision of Pachyptera , which includes a complete list of synonyms, detailed morphological descriptions of species and an identification key, as well as information on the habitat, distribution and phenology, nomenclatural notes, taxonomic comments and illustrations of all the species. In addition, we designate three lectotypes, propose one new combination, raise one variety to species status and describe a new species. After these adjustments, a Pachyptera with five well-defined species is recognised.

  10. Engineer/constructor description of work for Tank 241-SY-102 retrieval system, project W-211, initial tank retrieval systems

    International Nuclear Information System (INIS)

    Rieck, C.A.

    1996-02-01

    This document provides a description of work for the design and construction of a waste retrieval system for Tank 241-SY-102. The description of work includes a working estimate and schedule, as well as a narrative description and sketches of the waste retrieval system. The working estimate and schedule are within the established baselines for the Tank 241-SY-102 retrieval system. The technical baseline is provided in Functional Design Criteria, WHC-SD-W211-FDC-001, Revision 2

  11. ASSET guidelines. Revised 1991 Edition

    International Nuclear Information System (INIS)

    1991-12-01

    The present publication is an updated version of the IAEA Assessment of Safety Significant Events Team (ASSET) Guidelines, IAEA-TECDOC-573, published in 1990. Sections 5 and 6 include revised definitions and investigation guidelines for identification of both direct and root causes. These revisions were recommended by a Consultants Meeting held in Vienna on 3-7 December 1990. This guidance is not intended to infringe an expert's prerogative to investigate additional items. Its main purpose is to provide a basic structure and ensure consistency in the assessments. Use of the ASSET guidelines should also facilitate comparison between the observations made in different nuclear power plants and harmonize the reporting of generic ASSET results. The guidelines should always be used with a critical attitude and a view to possible improvements

  12. Trust Revision for Conflicting Sources

    Science.gov (United States)

    2017-02-01

    strategy is to first revise a priori trust assignments as a function of the degree of conflict, before the evidence is fused. This paper focuses on the...practical trust transitivity seems to be idiosyncratic for humans and animals, with no true analogue among non- living forms (and in the physical world ...visiting a foreign country Alice is looking for a restaurant where the locals go, because she would like to avoid places overrun by tourists. She meets a

  13. Clean Air Act. Revision 5

    Energy Technology Data Exchange (ETDEWEB)

    1994-02-15

    This Reference Book contains a current copy of the Clean Air Act, as amended, and those regulations that implement the statute and appear to be most relevant to DOE activities. The document is provided to DOE and contractor staff for informational purposes only and should not be interpreted as legal guidance. This Reference Book has been completely revised and is current through February 15, 1994.

  14. Guidelines for Descriptive Cataloging of Reports: A Revision of COSATI Standard for Descriptive Cataloging of Government Scientific and Technical Reports

    Science.gov (United States)

    1985-01-01

    Anuilla-SC St. Helena St. Helena St. Helena-SH St. Lucia St. Lucia St. Lucia -ST St. Pierre and St. Pierre and St. Pierre and Miquelon Miquelon...Isodoro del Lungo Del Lungo, I. Eufrosino della Volpala Della Volpaia, E. Angelo di Costanzo Di Costanzo, A. Gioacchino li Greci Li Greci, G. Niccolo 1o...Lungo Del Lungo, I. SPANISH Antonio del Rio Rio, A. del della Eufrosino della Volpaia Della Volpaia, E. den Ary den Hertog Hertog, A. den des Charles

  15. Description logic rules

    CERN Document Server

    Krötzsch, M

    2010-01-01

    Ontological modelling today is applied in many areas of science and technology,including the Semantic Web. The W3C standard OWL defines one of the most important ontology languages based on the semantics of description logics. An alternative is to use rule languages in knowledge modelling, as proposed in the W3C's RIF standard. So far, it has often been unclear how to combine both technologies without sacrificing essential computational properties. This book explains this problem and presents new solutions that have recently been proposed. Extensive introductory chapters provide the necessary

  16. MCO Monitoring activity description

    International Nuclear Information System (INIS)

    SEXTON, R.A.

    1998-01-01

    Spent Nuclear Fuel remaining from Hanford's N-Reactor operations in the 1970s has been stored under water in the K-Reactor Basins. This fuel will be repackaged, dried and stored in a new facility in the 200E Area. The safety basis for this process of retrieval, drying, and interim storage of the spent fuel has been established. The monitoring of MCOS in dry storage is a currently identified issue in the SNF Project. This plan outlines the key elements of the proposed monitoring activity. Other fuel stored in the K-Reactor Basins, including SPR fuel, will have other monitoring considerations and is not addressed by this activity description

  17. Preliminary hazards analysis of thermal scrap stabilization system. Revision 1

    International Nuclear Information System (INIS)

    Lewis, W.S.

    1994-01-01

    This preliminary analysis examined the HA-21I glovebox and its supporting systems for potential process hazards. Upon further analysis, the thermal stabilization system has been installed in gloveboxes HC-21A and HC-21C. The use of HC-21C and HC-21A simplified the initial safety analysis. In addition, these gloveboxes were cleaner and required less modification for operation than glovebox HA-21I. While this document refers to glovebox HA-21I for the hazards analysis performed, glovebox HC-21C is sufficiently similar that the following analysis is also valid for HC-21C. This hazards analysis document is being re-released as revision 1 to include the updated flowsheet document (Appendix C) and the updated design basis (Appendix D). The revised Process Flow Schematic has also been included (Appendix E). This Current revision incorporates the recommendations provided from the original hazards analysis as well. The System Design Description (SDD) has also been appended (Appendix H) to document the bases for Safety Classification of thermal stabilization equipment

  18. Revision of the fungus-farming ant genus Sericomyrmex Mayr (Hymenoptera, Formicidae, Myrmicinae

    Directory of Open Access Journals (Sweden)

    Ana Ješovnik

    2017-04-01

    Full Text Available The genus Sericomyrmex Mayr (Formicidae: Myrmicinae: Attini is a Neotropical group of fungus-farming ants known for its problematic taxonomy, caused by low morphological variability across the species, vague and old species descriptions, and an outdated and incomplete key published in 1916. Recent molecular studies revealed that Sericomyrmex is the product of a rapid recent radiation, with a divergence date of 4.3 million years ago. Here we present a comprehensive taxonomic revision of the genus Sericomyrmex based on morphology and a recently published molecular phylogeny. We discuss and illustrate morphological characters for Sericomyrmex workers, males, queens, and larvae. We report 18 standard morphological measurements and 5 indices for 529 workers, 50 queens, and 39 males, which we employ in morphometric analyses. The revised genus Sericomyrmex comprises eleven species, including three new species, here described as S. maravalhas sp. n., S. radioheadi sp. n., and S. saramama sp. n. We also redescribe S. amabilis Wheeler, S. bondari Borgmeier, S. lutzi Wheeler, S. mayri Forel, S. opacus Mayr, S. parvulus Forel, S. saussurei Emery, and S. scrobifer Forel. The number of recognized species (11 is lower than the previously recognized 19 species and 3 subspecies. The following species and subspecies are synonymized: under S. opacus [=S. aztecus Forel syn. n., S. zacapanus Wheeler syn. n., and S. diego Forel syn. n.]; under S. bondari [=S. beniensis Weber syn. n.]; under S. mayri [=S. luederwaldti Santschi syn. n., S. moreirai Santschi syn. n., S. harekulli Weber syn. n., S. harekulli arawakensis Weber syn. n., S. urichi Forel syn. n.]; under S. saussurei [=S. burchelli Forel syn. n., S. impexus Wheeler syn. n., S. urichi maracas Weber syn. n.]; and under S. parvulus [=S. myersi Weber syn. n.]. We provide a key to Sericomyrmex species for the worker caste and information on the geographic distributions of all species.

  19. Study of Faculty Viewpoints on Challenges and Factors Influencing Curriculum Development/Revision

    Directory of Open Access Journals (Sweden)

    Deepa Bhat

    2017-10-01

    Full Text Available Introduction: Curriculum Development (CD is an on-going process and not just a product. It must be responsive to changing values and expectations in education if it has to remain useful. Aim: To investigate the perspectives of educators on challenges and factors affecting the curriculum development/revision in health profession education courses. Materials and Methods: Mixed method approach was used for data collection. The faculties involved in curriculum development/revision were administered structured validated questionnaire (n=8, in depth interviews (n=3 and focus group discussion (n=3. Rigor was ensured through triangulation of data. The questionnaire data was analysed using descriptive statistics. Results: Faculties opined that 87.5% of courses are running successfully, 75% developed curriculum as team, 50% expressed that all stake holders were involved and 75% CD process did not turn out to be an organised approach. Needs assessment was not done in every course and some faculties did not have prior experience in CD. Time allotted was just sufficient and planning was fair. The allocation of finance and resources were just adequate. Team work and cooperation followed by qualified expert panel were the leading facilitating factors whereas lack of awareness on steps involved in CD and infrastructure were the significant hindering contributors. About 87.5% expressed their concern that addition of new courses affected their basic course they had to teach. Global requirements were not taken into account in several courses but reasonable number of courses was adequately monitored. Conclusion: Formal training of faculty in CD must be made mandatory in any health profession education. Understanding the facilitating and hindering factors with systematic monitoring of each step would impact the outcome of a program.

  20. 75 FR 69910 - Revisions to the California State Implementation Plan, California Air Resources Board-Consumer...

    Science.gov (United States)

    2010-11-16

    ...'s national Consumer Products rule. The TSD has more information on our evaluation. C. Public Comment... the California State Implementation Plan, California Air Resources Board--Consumer Products AGENCY... revisions concern volatile organic compound (VOC) emissions from consumer products. We are approving a local...

  1. 76 FR 62004 - Revisions to the California State Implementation Plan, California Air Resources Board-Consumer...

    Science.gov (United States)

    2011-10-06

    ... Organic Compound Emission Standards for Consumer Products. B. Does the rule meet the evaluation criteria... the California State Implementation Plan, California Air Resources Board--Consumer Products AGENCY... revisions concern volatile organic compound (VOC) emissions from consumer products. We are approving a local...

  2. Production management (1976)

    International Nuclear Information System (INIS)

    Lee, Sun Ryong

    1976-03-01

    This book introduces production management theory, which gives descriptions of production and system, systems approach, development of production management, Taylor system, Ford system, types of production system, measuring ingredients model of production management, decision of production management, selection of production facilities, arrangement of facilities design of work method and task, work measure system, demanding fore casting, production quality system and credibility system.

  3. 15 CFR 200.115 - Description of services and list of fees, incorporation by reference.

    Science.gov (United States)

    2010-01-01

    ... COMMERCE MEASUREMENT SERVICES POLICIES, SERVICES, PROCEDURES, AND FEES § 200.115 Description of services.... Department of Commerce. (4) Federal Depository Libraries. (c) Revisions of SP 250 will be issued from time to... concerning policies, procedures, services, and fees may be obtained by writing the Office of Measurement...

  4. Safety analysis report for the Mixed Waste Storage Facility and portable storage units at the Idaho National Engineering Laboratory. Revision 4

    International Nuclear Information System (INIS)

    Peatross, R.

    1997-01-01

    This revision contains Section 2 only which gives a description of the Mixed Waste Storage Facility (MWSF) and its operations. Described are the facility location, services and utilities, process description and operation, and safety support systems. The MWSF serves as a storage and repackaging facility for low-level mixed waste

  5. Programme for the Environmental Control at the Swedish Nuclear Facilities, Revision

    International Nuclear Information System (INIS)

    Linden, Ann-Marie

    2004-12-01

    This report contains a revised version of the Environmental Monitoring Programme for the Swedish Nuclear Facilities. The revision is based on earlier experiences and evaluations. Some samples have been excluded. Some have been added, for example spruce cone and the food products apple and currant. The sediment samples of 2 cm length have been completed with samples of 10 cm length every fourth year to follow the migration of radio nuclides down the sediment layers over time. The revised Environmental Monitoring Programme is valid from the 1st of January 2005

  6. THULE: A detailed description

    International Nuclear Information System (INIS)

    Terry, M.J.

    1964-07-01

    This report describes the THULE scheme of lattice physics calculation which has been developed in FORTRAN for the IBM 7090. This scheme predicts the neutron flux over energy and space, for many groups and regions, together with reactivity and reaction rate edits for both a single lattice cell and a reactor core. This report describes in detail the input requirements for the THULE programme which forms the main part of the scheme. Brief descriptions of the 7090 programmes TED 6 and NOAH are included as appendices. TED 6 will produce the THULE edits from a WDSN output tape and NOAH is a version of the METHUSELAH programme which contains many of the THULE edits and will also produce input cards for THULE. (author)

  7. Metaphorical descriptions of wrongdoers

    Directory of Open Access Journals (Sweden)

    Dryll Ewa Marta

    2017-10-01

    Full Text Available What is a metaphoric picture of an evil person made of? In a study devoted to the development of the ability to use metaphorical descriptions of humans, the semantic fields of four target metaphors - Human-Swamp, Human-Snake, Human-Knife, and Human-Nettle - were established and compared. Subjects (365 young adults were asked to decipher the metaphors’ meanings. The results were obtained mainly by qualitative analysis, with frequency analysis of clusters containing synonymous meanings. The results indicate that when creating imaginary characteristics of evil people, young adults seem to be more concerned about the possibility of suffering verbal harassment (most commonly: vulgarity, mockery, gossip, jeering than the threat of actual physical assault. The results may prove useful for developmental comparisons.

  8. Polemic and Descriptive Negations

    DEFF Research Database (Denmark)

    Horslund, Camilla Søballe

    2011-01-01

    to semantics and pragmatics, negations can be used in three different ways, which gives rise to a typology of three different types of negations: 1) the descriptive negation, 2) the polemic negation, and 3) the meta-linguistic negation (Nølke 1999, 4). This typology illuminates the fact that the negation...... common in certain social context or genres, while polemic negations are more likely to come up in other genres and social settings. Previous studies have shown a relation between articulatory prominence and register, which may further inform the analysis. Hence, the paper investigates how articulatory...... prominence and register may either work in concert or oppose each other with respect to the cues they provide for the interpretation....

  9. YUCCA MOUNTAIN SITE DESCRIPTION

    International Nuclear Information System (INIS)

    Simmons, A.M.

    2004-01-01

    The ''Yucca Mountain Site Description'' summarizes, in a single document, the current state of knowledge and understanding of the natural system at Yucca Mountain. It describes the geology; geochemistry; past, present, and projected future climate; regional hydrologic system; and flow and transport within the unsaturated and saturated zones at the site. In addition, it discusses factors affecting radionuclide transport, the effect of thermal loading on the natural system, and tectonic hazards. The ''Yucca Mountain Site Description'' is broad in nature. It summarizes investigations carried out as part of the Yucca Mountain Project since 1988, but it also includes work done at the site in earlier years, as well as studies performed by others. The document has been prepared under the Office of Civilian Radioactive Waste Management quality assurance program for the Yucca Mountain Project. Yucca Mountain is located in Nye County in southern Nevada. The site lies in the north-central part of the Basin and Range physiographic province, within the northernmost subprovince commonly referred to as the Great Basin. The basin and range physiography reflects the extensional tectonic regime that has affected the region during the middle and late Cenozoic Era. Yucca Mountain was initially selected for characterization, in part, because of its thick unsaturated zone, its arid to semiarid climate, and the existence of a rock type that would support excavation of stable openings. In 1987, the United States Congress directed that Yucca Mountain be the only site characterized to evaluate its suitability for development of a geologic repository for high-level radioactive waste and spent nuclear fuel

  10. YUCCA MOUNTAIN SITE DESCRIPTION

    Energy Technology Data Exchange (ETDEWEB)

    A.M. Simmons

    2004-04-16

    The ''Yucca Mountain Site Description'' summarizes, in a single document, the current state of knowledge and understanding of the natural system at Yucca Mountain. It describes the geology; geochemistry; past, present, and projected future climate; regional hydrologic system; and flow and transport within the unsaturated and saturated zones at the site. In addition, it discusses factors affecting radionuclide transport, the effect of thermal loading on the natural system, and tectonic hazards. The ''Yucca Mountain Site Description'' is broad in nature. It summarizes investigations carried out as part of the Yucca Mountain Project since 1988, but it also includes work done at the site in earlier years, as well as studies performed by others. The document has been prepared under the Office of Civilian Radioactive Waste Management quality assurance program for the Yucca Mountain Project. Yucca Mountain is located in Nye County in southern Nevada. The site lies in the north-central part of the Basin and Range physiographic province, within the northernmost subprovince commonly referred to as the Great Basin. The basin and range physiography reflects the extensional tectonic regime that has affected the region during the middle and late Cenozoic Era. Yucca Mountain was initially selected for characterization, in part, because of its thick unsaturated zone, its arid to semiarid climate, and the existence of a rock type that would support excavation of stable openings. In 1987, the United States Congress directed that Yucca Mountain be the only site characterized to evaluate its suitability for development of a geologic repository for high-level radioactive waste and spent nuclear fuel.

  11. CUSTOMIZED ACETABULAR COMPONENTS IN REVISION HIP ARTHROPLASTY

    Directory of Open Access Journals (Sweden)

    G. M. Kavalersky

    2016-01-01

    Full Text Available In recent years, there is a trend of increasing demand for revision hip arthroplasty. Among these patients there are many with complex acetabular defects, including patients with pelvic discontinuity. To ensure stability for revised acetabular components in such cases becomes a challenging or unachievable task. Such defects give indications for printing customized tri-flange acetabular component. The authors analysed own experience of creating and applying custom made acetabular components in 3 patients with complex acetabular defects. Material and methods. Among the patients there were 2 women and 1 man. Average age was 60,3±19,4 years (38 to 78 years. Two patients had III B defects with pelvic discontinuity and one patient had III A defect by Paprosky classification. As the first step, the authors in collaboration with engineers printed a plaster full size pelvic 3D model, as the second step a customized tri-flange acetabular component was designed and printed. Harris Hip Score was evaluated preoperatively and 3 months postoperatively. Results. Average follow-up period was 5,3±2,5 months (3 to 8 months. The authors observed no cases of implant loosening, dislocation or deep periprosthetic infection. Average Harris Hip Score before surgery was 27,13 and after surgery – 74,1 indicating a significant improvement in 3 months postoperatively. Conclusion. Indications for use of individual acetabular components in reported patients correspond to indications formulated by Berasi et al. The authors obtained encouraging early follow-up outcomes that correspond to data of other authors. In one patient certain difficulties were reported due to insufficient pelvic distraction. Component’s flanges prevented achieving adequate pelvic distraction. Nevertheless, good primary stability was achieved. Modern software and 3D metal printers can significantly reduce the production cost of customized acetabular components. Application of this technology can be

  12. Oral and Written Picture Description in Individuals with Aphasia

    Science.gov (United States)

    Vandenborre, Dorien; Visch-Brink, Evy; van Dun, Kim; Verhoeven, Jo; Mariën, Peter

    2018-01-01

    Background: Aphasia is characterized by difficulties in connected speech/writing. Aims: To explore the differences between the oral and written description of a picture in individuals with chronic aphasia (IWA) and healthy controls. Descriptions were controlled for productivity, efficiency, grammatical organization, substitution behaviour and…

  13. Re-visions of rationality?

    Science.gov (United States)

    Newell, Ben R

    2005-01-01

    The appeal of simple algorithms that take account of both the constraints of human cognitive capacity and the structure of environments has been an enduring theme in cognitive science. A novel version of such a boundedly rational perspective views the mind as containing an 'adaptive toolbox' of specialized cognitive heuristics suited to different problems. Although intuitively appealing, when this version was proposed, empirical evidence for the use of such heuristics was scant. I argue that in the light of empirical studies carried out since then, it is time this 'vision of rationality' was revised. An alternative view based on integrative models rather than collections of heuristics is proposed.

  14. Revised hypothesis and future perspectives

    DEFF Research Database (Denmark)

    Norsk, P; Drummer, C; Christensen, N J

    2001-01-01

    Results from space have been unexpected and not predictable from the results of ground-based simulations. Therefore, the concept of how weightlessness and gravity modulates the regulation of body fluids must be revised and a new simulation model developed. The main questions to ask in the future...... are the following: Does weightlessness induce a diuresis and natriuresis during the initial hours of space flight leading to an extracellular and intravascular fluid volume deficit? Can sodium in excess be stored in a hitherto unknown way, particularly during space flight? Why are fluid and sodium retaining systems...

  15. 76 FR 30080 - Revisions to the California State Implementation Plan, Placer County Air Pollution Control...

    Science.gov (United States)

    2011-05-24

    ...EPA is proposing to approve revisions to the Placer County Air Pollution Control District (PCAPCD) and Ventura County Air Pollution Control District (VCAPCD) portion of the California State Implementation Plan (SIP). These revisions concern volatile organic compound (VOC) emissions from surface coatings of metal parts and products. We are proposing to approve local rules to regulate these emission sources under the Clean Air Act as amended in 1990 (CAA or the Act).

  16. 77 FR 35327 - Revisions to the California State Implementation Plan, San Joaquin Valley Unified Air Pollution...

    Science.gov (United States)

    2012-06-13

    ...EPA is proposing to approve revisions to the San Joaquin Valley Unified Air Pollution Control District (SJVUAPCD) portion of the California State Implementation Plan (SIP). These revisions concern volatile organic compound (VOC) emissions from the manufacture of polystyrene, polyethylene, and polypropylene products. We are approving a local rule that regulates these emission sources under the Clean Air Act (CAA or the Act). We are taking comments on this proposal and plan to follow with a final action.

  17. 75 FR 10690 - Revisions to the California State Implementation Plan, San Joaquin Valley Air Pollution Control...

    Science.gov (United States)

    2010-03-09

    ...EPA is finalizing approval of revisions to the San Joaquin Valley Air Pollution Control District (SJVAPCD) portion of the California State Implementation Plan (SIP). These revisions were proposed in the Federal Register on December 18, 2009 and concern reduction of animal matter and volatile organic compound (VOC) emissions from crude oil production, cutback asphalt, and petroleum solvent dry cleaning. We are approving local rules that regulate these emission sources under the Clean Air Act as amended in 1990 (CAA or the Act).

  18. 77 FR 35329 - Revisions to the California State Implementation Plan, San Joaquin Valley Unified Air Pollution...

    Science.gov (United States)

    2012-06-13

    ...EPA is proposing to approve revisions to the San Joaquin Valley Unified Air Pollution Control District (SJVUAPCD) portion of the California State Implementation Plan (SIP). These revisions concern volatile organic compound (VOC) emissions from crude oil production sumps and refinery wastewater separators. We are approving local rules that regulate these emission sources under the Clean Air Act as amended in 1990 (CAA or the Act). We are taking comments on this proposal and plan to follow with a final action.

  19. 76 FR 30025 - Revisions to the California State Implementation Plan, Placer County Air Pollution Control...

    Science.gov (United States)

    2011-05-24

    ...EPA is taking direct final action to approve revisions to the Placer County Air Pollution Control District (PCAPCD) and Ventura County Air Pollution Control District (VCAPCD) portion of the California State Implementation Plan (SIP). These revisions concern volatile organic compound (VOC) emissions from surface coating of metal parts and products. We are approving local rules that regulate these emission sources under the Clean Air Act as amended in 1990 (CAA or the Act).

  20. A taxonomic revision of the genus Podocarpus

    OpenAIRE

    Laubenfels, de, D.J.

    1985-01-01

    In connection with the forthcoming revision of the Coniferae for the Flora Malesiana, the author thought it necessary to revise the genus Podocarpus. Although this genus has a substantial representation in Malesia (30 species), the revision is too involved to be appropriate with the Flora Malesiana per se. One new subgenus and 17 new sections are described, and 94 species are enumerated, of which 11 species and 1 variety are described as new, and 3 varieties have been raised to specific rank....

  1. Revision Vodcast Influence on Assessment Scores and Study Processes in Secondary Physics

    Science.gov (United States)

    Marencik, Joseph J.

    A quasi-experimental switching replications design with matched participants was employed to determine the influence of revision vodcasts, or video podcasts, on students' assessment scores and study processes in secondary physics. This study satisfied a need for quantitative results in the area of vodcast influence on students' learning processes. Thirty-eight physics students in an urban Ohio public high school participated in the study. The students in one Physics class were paired with students in another Physics class through the matching characteristics of current student cumulative test score mean and baseline study process as measured by the Study Process Questionnaire (SPQ). Students in both classes were given identical pedagogic treatment and access to traditional revision tools except for the supplemental revision vodcasts given to the experimental group. After students in the experimental group viewed the revision vodcast for a particular topic, the assessment scores of the students in the experimental group were compared to the assessment scores of the control group through the direct-difference, D, test to determine any difference between the assessment score means of each group. The SPQ was given at the beginning of the experiment and after each physics assessment. The direct-difference method was again used to determine any difference between the SPQ deep approach scores of each group. The SPQ was also used to determine any correlative effects between study process and revision vodcast use on students' assessment scores through descriptive statistics and an analysis of variance (ANOVA) test. Analysis indicated that revision vodcast use significantly increased students' assessment scores (p.05). There were no significant correlative effects of revision vodcast use and study processes on students' assessment scores (p>.05). This study offers educators the empirical support to devote the necessary effort, time, and resources into developing successful

  2. Revision Total Hip Arthoplasty: Factors Associated with Re-Revision Surgery

    OpenAIRE

    Khatod, M; Cafri, G; Inacio, MCS; Schepps, AL; Paxton, EW; Bini, SA

    2015-01-01

    The survivorship of implants after revision total hip arthroplasty and risk factors associated with re-revision are not well defined. We evaluated the re-revision rate with use of the institutional total joint replacement registry. The purpose of this study was to determine patient, implant, and surgeon factors associated with re-revision total hip arthroplasty.A retrospective cohort study was conducted. The total joint replacement registry was used to identify patients who had undergone revi...

  3. Revised nonstochastic health effects models

    International Nuclear Information System (INIS)

    Yaniv, S.S.; Scott, B.R.

    1991-01-01

    In 1989, the U.S. Nuclear Regulatory Commission (NRC) published a revision of the 1985 report, Health Effects Models for Nuclear Power Plant Accident Consequence Analysis, NUREG/CR-4214, that included models for early occurring and continuing nonstochastic effects, cancers and thyroid nodules, and genetic effects. This paper discusses specific models for lethality from early occurring and continuing effects. For brevity, hematopoietic-syndrome lethality is called hematopoietic death; pulmonary-syndrome lethality is called pulmonary death; and gastrointestinal syndrome lethality is called gastrointestinal death. Two-parameter Weibull risk functions are recommended for estimating the risk of hematopoietic, pulmonary, or gastrointestinal death. The risks are obtained indirectly by using hazard functions; as a result, this type of approach has been called hazard-function modeling and the models generated are called hazard-function models. In the 1989 NUREG/CR-4214 report, changes were made in the parameter values for a number of effects, and the models used to estimate hematopoietic and pulmonary deaths were substantially revised. Upper and lower estimates of model parameters are provided for all early health effects models. In this paper, we discuss the 1989 models for hematopoietic and pulmonary deaths, highlighting the differences between the 1989 and 1985 models. In addition, we give the reasons for which the 1985 models were modified

  4. PROJECT W-551 INTERIM PRETREATMENT SYSTEM PRECONCEPTUAL CANDIDATE TECHNOLOGY DESCRIPTIONS

    Energy Technology Data Exchange (ETDEWEB)

    MAY TH

    2008-08-12

    The Office of River Protection (ORP) has authorized a study to recommend and select options for interim pretreatment of tank waste and support Waste Treatment Plant (WTP) low activity waste (LAW) operations prior to startup of all the WTP facilities. The Interim Pretreatment System (IPS) is to be a moderately sized system which separates entrained solids and 137Cs from tank waste for an interim time period while WTP high level waste vitrification and pretreatment facilities are completed. This study's objective is to prepare pre-conceptual technology descriptions that expand the technical detail for selected solid and cesium separation technologies. This revision includes information on additional feed tanks.

  5. Description of pelletizing facility

    Energy Technology Data Exchange (ETDEWEB)

    Vojin Cokorilo; Dinko Knezevic; Vladimir Milisavljevic [University of Belgrade, Belgrade (Serbia). Faculty of Mining and Geology

    2006-07-01

    A lot of electrical energy in Serbia was used for heating, mainly for domestics. As it is the most expensive source for heating the government announced a National Program of Energy Efficiency with only one aim, to reduce the consumption of electric energy for the heating. One of the contributions to mentioned reduction is production of coal pellets from the fine coal and its use for domestic heating but also for heating of schools, hospitals, military barracks etc. Annual production of fine coal in Serbia is 300,000 tons. The stacks of fine coal present difficulties at each deep mine because of environmental pollution, spontaneous combustion, low price, smaller market etc. To overcome the difficulties and to give the contribution to National Program of Energy Efficiency researchers from the Department of Mining Engineering, the University of Belgrade designed and realized the project of fine coal pelletizing. This paper describes technical aspect of this project. Using a CPM machine Model 7900, a laboratory facility, then a semi-industrial pelletizing facility followed by an industrial facility was set up and produced good quality pellets. The plant comprised a coal fines hopper, conveyor belt, hopper for screw conveyor, screw conveyor, continuous mixer conditioner, binder reservoir, pump and pipelines, pellet mill, product conveyor belt and product hopper. 4 refs., 3 figs., 1 tab.

  6. Revising Lecture Notes: How Revision, Pauses, and Partners Affect Note Taking and Achievement

    Science.gov (United States)

    Luo, Linlin; Kiewra, Kenneth A.; Samuelson, Lydia

    2016-01-01

    Note taking has been categorized as a two-stage process: the recording of notes and the review of notes. We contend that note taking might best involve a three-stage process where the missing stage is revision. This study investigated the benefits of revising lecture notes and addressed two questions: First, is revision more effective than…

  7. 200 West Area Ash Pit Demolition Site closure plan. Revision 1

    International Nuclear Information System (INIS)

    Ruck, F.R.

    1994-01-01

    The Ash Pit Demolition Site had two known demolition events, the first occurred in November of 1984, and the second occurred in June of 1986. These demolition events were a form of thermal treatment for discarded explosive chemical products. Because the Ash Pit Demolition Site will no longer be used for this thermal activity, the site will be closed. Closure will be conducted pursuant to the requirements of the Washington State Department of Ecology (Ecology) ''Dangerous Waste Regulations'', Washington Administrative Code (WAC) 173-303-610 and 40 Code of Federal Regulations (CFR) 270.1. The 200 West Area Ash Pit Demolition Site Closure Plan consists of a Part A, Form 3, Dangerous Waste Permit Application (Revision 4) and a closure plan. An explanation of the Part A, Form 3, submitted with this closure plan is provided at the beginning of the Part A Section. The closure plan consists of nine chapters and five appendices. This closure plan presents a description of the Ash,Pit Demolition Site, the history of the waste treated, and the approach that will be followed to close the Ash Pit Demolition Site. Because there were no radioactively contaminated chemicals involved in the demolitions, the information on radionuclides is provided for ''information only''. Remediation of any radioactive contamination is not within the scope of this closure plan. Only dangerous constituents derived from Ash Pit Demolition Site operations will be addressed in this closure plan in accordance with WAC 173-303-610(2)(b)(i)

  8. Water activities in Forsmark. Ecological field inventory and classification of biodiversity values and description of forest production land; Vattenverksamhet i Forsmark. Ekologisk faeltinventering och naturvaerdesklassificering samt beskrivning av skogsproduktionsmark

    Energy Technology Data Exchange (ETDEWEB)

    Hamren, Ulrika; Collinder, Per [Ekologigruppen AB (Sweden)

    2010-12-15

    In 2009, the Swedish Nuclear Fuel and Waste Management Co (SKB) chose Forsmark in the Municipality of Oesthammar as site for the final repository for spent nuclear fuel. This report describes nature values and forestry areas in Forsmark, and provides part of the background material for description of consequences due to groundwater diversion during construction and operation of the repository. The report describes results of map studies and comprehensive field investigations, in terms of geographical delineations, descriptions of characteristics and classifications of nature values for groundwater dependent or groundwater favoured nature objects in Forsmark. The nature objects are located in an investigation area, which contains the area that according to numerical flow modelling could be affected by groundwater-table drawdown due to groundwater diversion

  9. Synoptic revision of Stenanona (Annonaceae)

    NARCIS (Netherlands)

    Schatz, G.E.; Maas, P.J.M.

    2010-01-01

    Preparation of a treatment of the Annonaceae for the Flora Mesoamericana necessitates the description of five new species of Stenanona (S. carrillensis, S. hondurensis, S. monticola, S. tuberculata and S. tubiflora); three additional new species are described from Colombia (S. columbiensis and S.

  10. Description of pelletizing facility

    Directory of Open Access Journals (Sweden)

    Čokorilo Vojin

    2006-01-01

    Full Text Available A lot of electrical energy in Serbia was used for heating, mainly for domes- tics. As it is the most expensive source for heating the government announced a National Program of Energy Efficiency with only one aim, to reduce the consumption of electric energy for the heating. One of the contributions to mentioned reduction is production of coal pellets from the fine coal and its use for domestic heating but also for heating of schools, hospitals, military barracks, etc. Annual production of fine coal in Serbia is 300,000 tons. The stacks of fine coal make a lot difficulties to the each mine because of environmental pollution, spontaneous combustion, low price, smaller market, etc. To prevent the difficulties and to give the contribution to National Program of Energy Efficiency researchers from the Department of Mining Engineering, University of Belgrade, designed and realized the project of fine coal pelletizing. This paper describes technical aspect of this project.

  11. Olkiluoto biosphere description 2006

    International Nuclear Information System (INIS)

    Haapanen, R.; Aro, L.; Ilvesniemi, H.; Kareinen, T.; Kirkkala, T.; Mykrae, S.; Turkki, H.; Lahdenperae, A.-M.; Ikonen, A.T.K.

    2007-02-01

    This report summarises the current knowledge of the biosphere of Olkiluoto, and it is the first Biosphere Description Report. The elements considered were climate, topography, land use, overburden, terrestrial vegetation and fauna and sea flora, fauna and water. The principal aim was to present a synthesis of the present state (now to 2020) and the main features of past evolution of the biosphere at the site using currently available data. The lack of site specific parameters and their importance was discussed. Conceptual ecosystem models are presented for land and sea. Currently available data made it possible to calculate the biomass of the terrestrial vegetation and further convert it to carbon. In the case of terrestrial animals, preliminary figures are given for moose alone due to lack of sitespecific data. For the same reason, the sea ecosystem model was not quantified within this work. The ecosystems on Olkiluoto do not deviate from the surrounding areas. Since mires are few on Olkiluoto, forests are the most important land ecosystem. However, coastal areas are the transition zones between land and sea, and also potential sites for deep groundwater discharge. The major interest concerning aquatic ecosystems was laid on four future lakes potentially developing from the sea due to the land up-lift. Current sea sediments near Olkiluoto are future land areas, and thus very important. Spatially, the forest ecosystems of Olkiluoto are now most comprehensively covered, while the temporal coverage is highest in sea ecosystems. Lack of data is greatest in terrestrial fauna and sea sediments. During this work, the system boundaries were crossed and the use of data over disciplines was started. The data were mostly in agreement, but some discrepancies were detected. To solve these, and to supplement the existing data, some recommendations were given. (orig.)

  12. Description of nuclear properties

    International Nuclear Information System (INIS)

    Faessler, A.

    1991-01-01

    The lectures want to give a survey about new developments in the description of nuclei. In a first chapter we try to derive nuclear properties from the basis theory of quantum chromodynamics. This is not rigorously possible. There are still many cracks in the bridge between QCD and nuclear structure. The basic ingredient for nuclear structure calculations is the nucleon-nucleon interaction. We shall discuss the nucleon-nucleon interaction in a quark model. In a further chapter we discuss the way to come from a bare nucleon-nucleon interaction in free space to an effective nucleon-nucleon interaction in a limited model space for nuclear structure calculations. Such nuclear structure calculations can be done as shell model calculations. But they are due to the large number of configurations limited to light nuclei. We discuss possibilities (MONSTER and VAMPIR) to enlarge the model space for medium heavy and heavy nuclei. As the example of the low lying isovector 1 + states we discuss collective models (Bohr - Mottelson Model, interacting Boson Model) with proton and neutron degrees of freedom. The same states can also be described microscopically with the Quasi-Particle Random Phase Approximation (QRPA). We discuss the removal of spurious states in RPA. We also discuss the calculation of form factors and compare with inelastic electron scattering data. Finally we apply QRPA to the double-beta decay. Grand unified models predict, that the neutrino is identical with his antiparticle, that it has a finite mass and a weak right-handed interaction. If these properties are found the standard model of the strong and the electro-weak interaction can not be correct. Presently we can only derive from lower limits of the half lives of neutrinoless double-beta decays upper limits of the neutrino mass and of the right-handedness of the weak interaction and lower limits of the mass of the right handed heavy vector boson, if a specific grand unified model is given. (author)

  13. Emergency Doses (ED) - Revision 3: A calculator code for environmental dose computations

    International Nuclear Information System (INIS)

    Rittmann, P.D.

    1990-12-01

    The calculator program ED (Emergency Doses) was developed from several HP-41CV calculator programs documented in the report Seven Health Physics Calculator Programs for the HP-41CV, RHO-HS-ST-5P (Rittman 1984). The program was developed to enable estimates of offsite impacts more rapidly and reliably than was possible with the software available for emergency response at that time. The ED - Revision 3, documented in this report, revises the inhalation dose model to match that of ICRP 30, and adds the simple estimates for air concentration downwind from a chemical release. In addition, the method for calculating the Pasquill dispersion parameters was revised to match the GENII code within the limitations of a hand-held calculator (e.g., plume rise and building wake effects are not included). The summary report generator for printed output, which had been present in the code from the original version, was eliminated in Revision 3 to make room for the dispersion model, the chemical release portion, and the methods of looping back to an input menu until there is no further no change. This program runs on the Hewlett-Packard programmable calculators known as the HP-41CV and the HP-41CX. The documentation for ED - Revision 3 includes a guide for users, sample problems, detailed verification tests and results, model descriptions, code description (with program listing), and independent peer review. This software is intended to be used by individuals with some training in the use of air transport models. There are some user inputs that require intelligent application of the model to the actual conditions of the accident. The results calculated using ED - Revision 3 are only correct to the extent allowed by the mathematical models. 9 refs., 36 tabs

  14. Quality Assurance Requirements and Description

    International Nuclear Information System (INIS)

    Ram Murthy

    2002-01-01

    The Quality Assurance Requirements and Description (QARD) is the principal Quality Assurance (QA) document for the Civilian Radioactive Waste Management Program (Program). It establishes the minimum requirements for the QA program [INTRODUCTION :1p2s (NOT A REQUIREMENT)]. The QARD contains regulatory requirements and program commitments necessary for the development of an effective QA program [INTRODUCTION :1p3s (NOT A REQUIREMENT)]. Implementing documents must be based on, and be consistent with the QARD. The QARD applies to the following: (1) Acceptance of spent nuclear fuel and high-level waste. (2) Transport of spent nuclear fuel and high-level waste. (3) Storage of spent nuclear fuel through receipt of storage cask certification or a facility operating license. (4) Monitored Geologic Repository, including the site characterization activities [Exploratory Studies Facility (ESF) and surface based testing], through receipt of an operating license. (5) High-level waste form development through qualification, production, and acceptance. (6) Characterization of DOE spent nuclear fuel, and conditioning through acceptance of DOE spent nuclear fuel. Section 2.0, Quality Assurance Program, defines in greater detail criteria for determining work subject to the QARD

  15. Sequenced Peer Revision: Creating Competence and Community

    Science.gov (United States)

    Bowman, Ingrid K.; Robertson, John

    2013-01-01

    Mastering techniques of self- and peer revision is a valuable tool for all writers, especially US-educated Generation 1.5 students, whose near fluency enables them to dialogue successfully about their writing. Using action research, 2 academic writing instructors systematically trained students to more responsibly and effectively revise their…

  16. Employing Picture Description to Assess the Students' Descriptive Paragraph Writing

    Directory of Open Access Journals (Sweden)

    Ida Ayu Mega Cahyani

    2018-03-01

    Full Text Available Writing is considered as an important skill in learning process which is needed to be mastered by the students. However, in teaching learning process at schools or universities, the assessment of writing skill is not becoming the focus of learning process and the assessment is administered inappropriately. In this present study, the researcher undertook the study which dealt with assessing descriptive paragraph writing ability of the students through picture description by employing an ex post facto as the research design. The present study was intended to answer the research problem dealing with the extent of the students’ achievement of descriptive paragraph writing ability which is assessed through picture description. The samples under the study were 40 students determined by means of random sampling technique with lottery system. The data were collected through administering picture description as the research instrument. The obtained data were analyzed by using norm-reference measure of five standard values. The results of the data analysis showed that there were 67.50% samples of the study were successful in writing descriptive paragraph, while there were 32.50% samples were unsuccessful in writing descriptive paragraph which was assessed by administering picture description test

  17. Opinion of the scientific committee on consumer safety (SCCS)--2nd Revision of the safety of the use of poly(hexamethylene) biguanide hydrochloride or polyaminopropyl biguanide (PHMB) in cosmetic products.

    Science.gov (United States)

    Bernauer, Ulrike

    2015-12-01

    Conclusion of the opinion: On the basis of the data available, the SCCS concludes that Polyaminopropyl Biguanide (PHMB) is not safe for consumers when used as a preservative in cosmetic spray formulations and in all cosmetic products up to the maximum concentration of 0.3%. The safe use could be based on a lower use concentration and/or restrictions with regard to cosmetic products' categories. Dermal absorption studies on additional representative cosmetic formulations are needed. PHMB is used in a variety of applications other than cosmetics. General exposure data from sources others than cosmetics should be submitted for the assessment of the aggregate exposure of PHMB. Copyright © 2015. Published by Elsevier Inc.

  18. 76 FR 36518 - Notice of Intent To Request Approval To Revise and Extend an Information Collection

    Science.gov (United States)

    2011-06-22

    ... Survey. Revision to burden hours may be needed due to changes in the size of the target population... industry with current and future information on market supplies. This data is also used in preparing production, disposition, and income statistics which facilitate more orderly production, marketing, and...

  19. 78 FR 38912 - Notice of Request for Revision of a Currently Approved Information Collection

    Science.gov (United States)

    2013-06-28

    ... immediate production and marketing decisions and as a guide to the amount of product in the supply channel... DEPARTMENT OF AGRICULTURE Agricultural Marketing Service [Document No. AMS-FV-13-0022] Notice of Request for Revision of a Currently Approved Information Collection AGENCY: Agricultural Marketing Service...

  20. 76 FR 70108 - Notice of Intent To Request Approval To Revise and Extend an Information Collection

    Science.gov (United States)

    2011-11-10

    ... Milk Products Surveys. Revision to burden hours will be needed due to changes in the size of the target... collection of Dairy Product Prices. This data will be collected by the Agricultural Marketing Service (AMS... Agricultural Marketing Act of 1946. Authority: Voluntary dairy information reporting is conducted under...

  1. ORIGEN2: a revised and updated version of the Oak Ridge isotope generation and depletion code

    International Nuclear Information System (INIS)

    Croff, A.G.

    1980-07-01

    ORIGEN2 is a versatile point depletion and decay computer code for use in simulating nuclear fuel cycles and calculating the nuclide compositions of materials contained therein. This code represents a revision and update of the original ORIGEN computer code which has been distributed world-wide beginning in the early 1970s. The purpose of this report is to give a summary description of a revised and updated version of the original ORIGEN computer code, which has been designated ORIGEN2. A detailed description of the computer code ORIGEN2 is presented. The methods used by ORIGEN2 to solve the nuclear depletion and decay equations are included. Input information necessary to use ORIGEN2 that has not been documented in supporting reports is documented

  2. Revised GCFR safety program plan

    International Nuclear Information System (INIS)

    Kelley, A.P.; Boyack, B.E.; Torri, A.

    1980-05-01

    This paper presents a summary of the recently revised gas-cooled fast breeder reactor (GCFR) safety program plan. The activities under this plan are organized to support six lines of protection (LOPs) for protection of the public from postulated GCFR accidents. Each LOP provides an independent, sequential, quantifiable risk barrier between the public and the radiological hazards associated with postulated GCFR accidents. To implement a quantitative risk-based approach in identifying the important technology requirements for each LOP, frequency and consequence-limiting goals are allocated to each. To ensure that all necessary tasks are covered to achieve these goals, the program plan is broken into a work breakdown structure (WBS). Finally, the means by which the plan is being implemented are discussed

  3. Radiological control manual. Revision 1

    Energy Technology Data Exchange (ETDEWEB)

    Kloepping, R.

    1996-05-01

    This Lawrence Berkeley National Laboratory Radiological Control Manual (LBNL RCM) has been prepared to provide guidance for site-specific additions, supplements and interpretation of the DOE Radiological Control Manual. The guidance provided in this manual is one methodology to implement the requirements given in Title 10 Code of Federal Regulations Part 835 (10 CFR 835) and the DOE Radiological Control Manual. Information given in this manual is also intended to provide demonstration of compliance to specific requirements in 10 CFR 835. The LBNL RCM (Publication 3113) and LBNL Health and Safety Manual Publication-3000 form the technical basis for the LBNL RPP and will be revised as necessary to ensure that current requirements from Rules and Orders are represented. The LBNL RCM will form the standard for excellence in the implementation of the LBNL RPP.

  4. Potentialities of Revised Quantum Electrodynamics

    Directory of Open Access Journals (Sweden)

    Lehnert B.

    2013-10-01

    Full Text Available The potentialities of a revised quantum electrodynamic theory (RQED earlier established by the author are reconsidered, also in respect to other fundamental theories such as those by Dirac and Higgs. The RQED theory is characterized by intrinsic linear symmetry breaking due to a nonzero divergence of the electric field strength in the vacuum state, as supported by the Zero Point Energy and the experimentally confirmed Casimir force. It includes the results of electron spin and antimatter by Dirac, as well as the rest mass of elementary particles predicted by Higgs in terms of spontaneous nonlinear symmetry breaking. It will here be put into doubt whether the approach by Higgs is the only theory which becomes necessary for explaining the particle rest masses. In addition, RQED theory leads to new results beyond those being available from the theories by Dirac, Higgs and the Standard Model, such as in applications to leptons and the photon.

  5. Hot sample archiving. Revision 3

    International Nuclear Information System (INIS)

    McVey, C.B.

    1995-01-01

    This Engineering Study revision evaluated the alternatives to provide tank waste characterization analytical samples for a time period as recommended by the Tank Waste Remediation Systems Program. The recommendation of storing 40 ml segment samples for a period of approximately 18 months (6 months past the approval date of the Tank Characterization Report) and then composite the core segment material in 125 ml containers for a period of five years. The study considers storage at 222-S facility. It was determined that the critical storage problem was in the hot cell area. The 40 ml sample container has enough material for approximately 3 times the required amount for a complete laboratory re-analysis. The final result is that 222-S can meet the sample archive storage requirements. During the 100% capture rate the capacity is exceeded in the hot cell area, but quick, inexpensive options are available to meet the requirements

  6. Radiological control manual. Revision 1

    International Nuclear Information System (INIS)

    Kloepping, R.

    1996-05-01

    This Lawrence Berkeley National Laboratory Radiological Control Manual (LBNL RCM) has been prepared to provide guidance for site-specific additions, supplements and interpretation of the DOE Radiological Control Manual. The guidance provided in this manual is one methodology to implement the requirements given in Title 10 Code of Federal Regulations Part 835 (10 CFR 835) and the DOE Radiological Control Manual. Information given in this manual is also intended to provide demonstration of compliance to specific requirements in 10 CFR 835. The LBNL RCM (Publication 3113) and LBNL Health and Safety Manual Publication-3000 form the technical basis for the LBNL RPP and will be revised as necessary to ensure that current requirements from Rules and Orders are represented. The LBNL RCM will form the standard for excellence in the implementation of the LBNL RPP

  7. Evaluation of Students' Perceptions Towards An Innovative Teaching-Learning Method During Pharmacology Revision Classes: Autobiography of Drugs.

    Science.gov (United States)

    Joshi, Anuradha; Ganjiwale, Jaishree

    2015-07-01

    Various studies in medical education have shown that active learning strategies should be incorporated into the teaching-learning process to make learning more effective, efficient and meaningful. The aim of this study was to evaluate student's perceptions on an innovative revision method conducted in Pharmacology i.e. in form of Autobiography of Drugs. The main objective of study was to help students revise the core topics in Pharmacology in an interesting way. Questionnaire based survey on a newer method of pharmacology revision in two batches of second year MBBS students of a tertiary care teaching medical college. Various sessions on Autobiography of Drugs were conducted amongst two batches of second year MBBS students, during their Pharmacology revision classes. Student's perceptions were documented with the help of a five point likert scale through a questionnaire regarding quality, content and usefulness of this method. Descriptive analysis. Students of both the batches appreciated the innovative method taken up for revision. The median scores in most of the domains in both batches were four out of five, indicative of good response. Feedback from open-ended questions also revealed that the innovative module on "Autobiography of Drugs" was taken as a positive learning experience by students. Autobiography of drugs has been used to help students recall topics that they have learnt through other teachings methods. Autobiography sessions in Pharmacology during revision slots, can be one of the interesting ways in helping students revise and recall topics which have already been taught in theory classes.

  8. Neutron capture cross-section of fission products in the European activation file EAF-3

    International Nuclear Information System (INIS)

    Kopecky, J.; Delfini, M.G.; Kamp, H.A.J. van der; Gruppelaar, H.; Nierop, D.

    1992-05-01

    This paper contains a description of the work performed to extend and revise the neutron capture data in the European Activation File (EAF-3) with emphasis on nuclides in the fission-product mass range. The starter was the EAF-1 data file from 1989. The present version, EAF/NG-3, contains (n,γ) excitation functions for all nuclides (729 targets) with half-lives exceeding 1/2 day in the mass range from H-1 to Cm-248. The data file is equipped with a preliminary uncertainty file, that will be improved in the near future. (author). 19 refs.; 5 figs.; 3 tabs

  9. Equations of state for detonation products of high energy PBX explosives

    Energy Technology Data Exchange (ETDEWEB)

    Lee, E. L.; Helm, F. H.; Finger, M.; Walton, J. R.

    1977-08-01

    It has become apparent that the accumulated changes in the analysis of cylinder test data, in the material specifications, and in the hydrodynamic code simulation of the cylinder test necessitated an update of the detonation product EOS description for explosives in common use at LLL. The explosives reviewed are PBX-9404-3, LX-04-1, LX-10-1, LX-14-0 and LX-09-1. In order to maintain the proper relation of predicted performance of these standard explosives, they have been revised as a single set.

  10. Revision of criteria for foodstuffs control following a nuclear or radiological emergency

    Energy Technology Data Exchange (ETDEWEB)

    Park, Sang Hyun; Lee, Young Min; Jeong, Seung Young [Korea Institute of Nuclear Safety, Daejeon (Korea, Republic of)

    2015-10-15

    GAL(generic action level)s were derived using cost-benefit methods. But the factors used to derive GALs, such as Gross National Product (GNP) and cost of foodstuff, have been changed for last 10 years. Moreover the standards did not consider exposure situation change from emergency exposure to existing exposure situation. In this study, two ways to revise existing standards for foodstuff control were considered; 1st, revision of GAL, 2nd, newly derived reference level. In this study, two methods to revise food control criteria following nuclear emergency were suggested. GAL based on recent GNI and cost of foodstuff would be revised and decreased up to 30 % than existing criteria. DRLs reflecting exposure situation and consumption pattern were smaller than existing criteria for group 1 nuclides. The approach considered in the study would be applied to set up domestic criteria for food control during and following nuclear or radiological emergency.

  11. Revision of criteria for foodstuffs control following a nuclear or radiological emergency

    International Nuclear Information System (INIS)

    Park, Sang Hyun; Lee, Young Min; Jeong, Seung Young

    2015-01-01

    GAL(generic action level)s were derived using cost-benefit methods. But the factors used to derive GALs, such as Gross National Product (GNP) and cost of foodstuff, have been changed for last 10 years. Moreover the standards did not consider exposure situation change from emergency exposure to existing exposure situation. In this study, two ways to revise existing standards for foodstuff control were considered; 1st, revision of GAL, 2nd, newly derived reference level. In this study, two methods to revise food control criteria following nuclear emergency were suggested. GAL based on recent GNI and cost of foodstuff would be revised and decreased up to 30 % than existing criteria. DRLs reflecting exposure situation and consumption pattern were smaller than existing criteria for group 1 nuclides. The approach considered in the study would be applied to set up domestic criteria for food control during and following nuclear or radiological emergency

  12. Reactor protection system. Revision 1

    International Nuclear Information System (INIS)

    Fairbrother, D.B.; Vincent, D.R.; Lesniak, L.M.

    1975-04-01

    The reactor protection system-II (RPS-II) designed for use on Babcock and Wilcox 145- and 205-fuel assembly pressurized water reactors is described. In this system, relays in the trip logic have been replaced by solid state devices. A calculating module for the low DNBR, pump status, and offset trip functions has replaced the overpower trip (based on flow and imbalance), the power/RC pump trip, and the variable low pressure trip. Included is a description of the changes from the present Oconee-type reactor protection system (RPS-I), a functional and hardware description of the calculating module, and a discussion of the qualification program conducted to ensure that the degree of protection provided by RPS-II is not less than that provided by previously licensed systems supplied by B and W. (U.S.)

  13. Dual descriptions of supersymmetry breaking

    International Nuclear Information System (INIS)

    Intrilligator, K.; Thomas, S.

    1996-08-01

    Dynamical supersymmetry breaking is considered in models which admit descriptions in terms of electric, confined, or magnetic degrees of freedom in various limits. In this way, a variety of seemingly different theories which break supersymmetry are actually interrelated by confinement or duality. Specific examples are given in which there are two dual descriptions of the supersymmetry breaking ground state

  14. Revision 2 of the Program of NPP Krsko Decommissioning and SF and LILW Disposal

    International Nuclear Information System (INIS)

    Levanat, I.; Lokner, V.; Rapic, A.

    2010-01-01

    First joint Slovenian-Croatian Program of NPP Krsko Decommissioning and SF and LILW Disposal (DP) was completed in 2004 and formally adopted in 2005. As bilateral agreement on the NPP requires periodic revisions at least each 5 years, revision 2 of DP was started in September 2008, with the purpose to incorporate relevant developments since the 1st revision, to improve the level of details and reliability of DP, and to propose updated and more accurate cost estimates and appropriate financing models. In the first phase of the revision, new supporting studies for DP modules were prepared. Among these studies, the most demanding was the NPP Krsko specific Preliminary Decommissioning Plan (PDP), complying with the IAEA-recommended format, which included development of the NPP decommissioning inventory database. For upgrade of SF management, new and more detailed descriptions with improved cost estimates were prepared. Update of LILW disposal concept was based on new developments and projects prepared for the Slovenian repository. In the second phase of the revision, integrated DP scenarios were formulated and analyzed. They integrate NPP decommissioning together with RW and SF management/disposal into rationally inter-related sequences. Boundary conditions for this revision required: (a) that the reference scenario from the previous revision should be re-examined, with appropriate variations or new alternatives; (b) that the option of the NPP Krsko life extension should also be included; and (c) that the possibility of diverging interests of the contracting parties should also be analyzed (i.e. waste division and separate management). Finally, scenario evaluation is intended to compare the analyzed scenarios taking into account both their feasibility and estimated costs. It should provide the basis for determining future financing of DP, namely the annuities to be paid by the NPP Krsko owners into the national decommissioning funds.(author).

  15. Revision of the Astyanax orthodus species-group (Teleostei: Characidae with descriptions of three new species

    Directory of Open Access Journals (Sweden)

    Raquel I. Riuz-C

    2018-02-01

    Full Text Available The Astyanax orthodus species-group includes nine species: Astyanax boliviensis sp. nov., A. bopiensis nom. nov., A. embera sp. nov., A. gandhiae sp. nov., A. moorii comb. nov., A. orthodus, A. superbus, A. villwocki and A. yariguies comb. nov. The group is diagnosed by the presence of a series of pinnate-shaped marks (chevrons located along the lateral midline, which extends from the humeral region to the caudal peduncle. Astyanax bopiensis nom. nov. is proposed as a substitute name for Astyanacinus multidens, which, along with Astyanax yariguies comb. nov., we reassign to Astyanax.We also propose the synonymy of Astyanacinus with Astyanax. The members of the A. orthodus species-group are distributed in northwestern South America, occurring in the Patia River drainage (A. embera sp. nov. of the Pacific coast of Colombia, the Atrato River Basin (A. orthodus, the Magdalena River Basin (A. yariguies comb. nov. of Caribbean Colombia, streams of the southern flank of the Andes of the Orinoco Basin in Venezuela (A. superbus, in the upper Amazon River Basin of Colombia, Ecuador and Peru (A. villwocki, A. gandhiae sp. nov., from the upper Paraguay River (A. moorii comb. nov., the Madidi and Mamore Rivers, Bolivia (A. boliviensis sp. nov. and A. bopiensis nom. nov.. All species currently included in Astyanacinus are reassigned to the Astyanax orthodus species-group.

  16. 75 FR 76664 - Commerce Control List: Revising Descriptions of Items and Foreign Availability

    Science.gov (United States)

    2010-12-09

    ..., 1401 Constitution Avenue, NW., Room 2705, Washington, DC 20230, ATTN: Notice of Inquiry--CCL. FOR..., Netherlands, New Zealand, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, South Korea, Spain, Sweden...

  17. Descriptions and revisions of some species of Isopoda Bopyridae of the North Western Atlantic Ocean

    NARCIS (Netherlands)

    Markham, J.C.

    1988-01-01

    Material reported is: Asymmetrione clibanarii Markham, 1975 ex Clibanarius sp. in Colombia (new host, new locality) and ex C. tricolor (Gibbes, 1850) in Colombia (new locality); A. desultor Markham, 1975 ex Pagurus brevidactylus (Stimpson, 1862) in Colombia and ex Iridopagurus sp. in Belize (new

  18. PR-EDB: Power Reactor Embrittlement Data Base, Version 2. Revision 2, Program description

    Energy Technology Data Exchange (ETDEWEB)

    Stallmann, F.W.; Wang, J.A.; Kam, F.B.K.; Taylor, B.J. [Oak Ridge National Lab., TN (United States)

    1994-01-01

    Investigations of regulatory issues such as vessel integrity over plant life, vessel failure, and sufficiency of current codes Standard Review Plans (SRP`s) and Guides for license renewal can be greatly expedited by the use of a well-designed computerized data base. Also, such a data base is essential for the validation of embrittlement prediction models by researchers. The Power Reactor Embrittlement Data Base (PR-EDB) is such a comprehensive collection of data for US commercial nuclear reactors. The current version of the PR-EDB contains the Charpy test data that were irradiated in 252 capsules of 96 reactors and consists of 207 data points for heat-affected-zone (HAZ) materials (98 different HAZ), 227 data points for weld materials (105 different welds), 524 data points for base materials (136 different base materials), including 297 plate data points (85 different plates), 119 forging data points (31) different forging), and 108 correlation monitor materials data points (3 different plates). The data files are given in dBASE format and can be accessed with any computer using the DOS operating system. ``User-friendly`` utility programs are used to retrieve and select specific data, manipulate data, display data to the screen or printer, and to fit and plot Charpy impact data. The results of several studies investigated are presented in Appendix D.

  19. 76 FR 78022 - Revised Descriptions of Park, Preserve and Wilderness Boundaries, Gates of the Arctic National...

    Science.gov (United States)

    2011-12-15

    ... an easterly summit of Marshmallow Mountain located in the easterly portion of section 20, T. 14 S., R... Marshmallow Mountain, to a westerly summit of Marshmallow Mountain located in the northerly portion of section... an easterly summit of Marshmallow Mountain located in the easterly portion of section 20, T. 14 S., R...

  20. INTERLINE 5.0 -- An expanded railroad routing model: Program description, methodology, and revised user's manual

    International Nuclear Information System (INIS)

    Johnson, P.E.; Joy, D.S.; Clarke, D.B.; Jacobi, J.M.

    1993-03-01

    A rail routine model, INTERLINE, has been developed at the Oak Ridge National Laboratory to investigate potential routes for transporting radioactive materials. In Version 5.0, the INTERLINE routing algorithms have been enhanced to include the ability to predict alternative routes, barge routes, and population statistics for any route. The INTERLINE railroad network is essentially a computerized rail atlas describing the US railroad system. All rail lines, with the exception of industrial spurs, are included in the network. Inland waterways and deep water routes along with their interchange points with the US railroadsystem are also included. The network contains over 15,000 rail and barge segments (links) and over 13,000 stations, interchange points, ports, and other locations (nodes). The INTERLINE model has been converted to operate on an IBM-compatible personal computer. At least a 286 computer with a hard disk containing approximately 6 MB of free space is recommended. Enhanced program performance will be obtained by using arandom-access memory drive on a 386 or 486 computer

  1. DWPF waste form compliance plan (Draft Revision)

    International Nuclear Information System (INIS)

    Plodinec, M.J.; Marra, S.L.

    1991-01-01

    The Department of Energy currently has over 100 million liters of high-level radioactive waste in storage at the Savannah River Site (SRS). In the late 1970's, the Department of Energy recognized that there were significant safety and cost advantages associated with immobilizing the high-level waste in a stable solid form. Several alternative waste forms were evaluated in terms of product quality and reliability of fabrication. This evaluation led to a decision to build the Defense Waste Processing Facility (DWPF) at SRS to convert the easily dispersed liquid waste to borosilicate glass. In accordance with the NEPA (National Environmental Policy Act) process, an Environmental Impact Statement was prepared for the facility, as well as an Environmental Assessment of the alternative waste forms, and issuance of a Record of Decision (in December, 1982) on the waste form. The Department of Energy, recognizing that start-up of the DWPF would considerably precede licensing of a repository, instituted a Waste Acceptance Process to ensure that these canistered waste forms would be acceptable for eventual disposal at a federal repository. This report is a revision of the DWPF compliance plan

  2. Evaluations of 1990 PRISM design revisions

    International Nuclear Information System (INIS)

    Van Tuyle, G.J.; Slovik, G.C.; Chan, B.C.; Aronson, A.L.; Kennett, R.J.

    1992-03-01

    Analyses of the 1990 version of the PRISM Advanced Liquid Metal Reactor (ALMR) design are presented and discussed. Most of the calculations were performed using BNL computer codes, particularly SSC and MINET. In many cases, independent BNL calculations were compared against analyses presented by General Electric when they submitted the PRISM design revisions for evaluation by the Nuclear Regulatory Commission (NRC). The current PRISM design utilizes the metallic fuel developed by Argonne National Laboratory (ANL) which facilitates the passive/''inherent'' shutdown mechanism that acts to shut down reactor power production whenever the system overheats. There are a few vulnerabilities in the passive shutdown, with the most worrisome being the positive feedback from sodium density decreases or sodium voiding. Various postulated unscrammed events were examined by GE and/or BNL, and much of the analysis discussed in this report is focused on this category of events. For the most part, the BNL evaluations confirm the information submitted by General Electric. The principal areas of concern are related to the performance of the ternary metal fuel, and may be resolved as ANL continues with its fuel development and testing program

  3. Cochlear implant revision surgeries in children.

    Science.gov (United States)

    Amaral, Maria Stella Arantes do; Reis, Ana Cláudia Mirândola B; Massuda, Eduardo T; Hyppolito, Miguel Angelo

    2018-02-16

    The surgery during which the cochlear implant internal device is implanted is not entirely free of risks and may produce problems that will require revision surgeries. To verify the indications for cochlear implantation revision surgery for the cochlear implant internal device, its effectiveness and its correlation with certain variables related to language and hearing. A retrospective study of patients under 18 years submitted to cochlear implant Surgery from 2004 to 2015 in a public hospital in Brazil. Data collected were: age at the time of implantation, gender, etiology of the hearing loss, audiological and oral language characteristics of each patient before and after Cochlear Implant surgery and any need for surgical revision and the reason for it. Two hundred and sixty-five surgeries were performed in 236 patients. Eight patients received a bilateral cochlear implant and 10 patients required revision surgery. Thirty-two surgeries were necessary for these 10 children (1 bilateral cochlear implant), of which 21 were revision surgeries. In 2 children, cochlear implant removal was necessary, without reimplantation, one with cochlear malformation due to incomplete partition type I and another due to trauma. With respect to the cause for revision surgery, of the 8 children who were successfully reimplanted, four had cochlear calcification following meningitis, one followed trauma, one exhibited a facial nerve malformation, one experienced a failure of the cochlear implant internal device and one revision surgery was necessary because the electrode was twisted. The incidence of the cochlear implant revision surgery was 4.23%. The period following the revision surgeries revealed an improvement in the subject's hearing and language performance, indicating that these surgeries are valid in most cases. Copyright © 2018 Associação Brasileira de Otorrinolaringologia e Cirurgia Cérvico-Facial. Published by Elsevier Editora Ltda. All rights reserved.

  4. Transportation system requirements document. Revision 1 DCN01. Supplement

    International Nuclear Information System (INIS)

    1995-05-01

    The original Transportation System Requirements Document described the functions to be performed by and the technical requirements for the Transportation System to transport spent nuclear fuel (SNF) and high-level radioactive waste (HLW) from Purchaser and Producer sites to a Civilian Radioactive Waste Management System (CRWMS) site, and between CRWMS sites. The purpose of that document was to define the system-level requirements. These requirements include design and operations requirements to the extent they impact on the development of the physical segments of Transportation. The document also presented an overall description of Transportation, its functions, its segments, and the requirements allocated to the segments and the system-level interfaces with Transportation. This revision of the document contains only the pages that have been modified

  5. Revision of the genus Exaesiopus Reichardt, 1926 (Coleoptera, Histeridae, Saprininae

    Directory of Open Access Journals (Sweden)

    Tomáš Lackner

    2015-01-01

    Full Text Available The genus Exaesiopus Reichardt, 1926 is revised herein. It now contains seven species; one new combination is proposed: Pachylopus glaucus = Exaesiopus glaucus (Bickhardt, 1914, comb. n., and one species is described as new: Exaesiopus therondi sp. n. from Afghanistan. Subspecies E. grossipes berberus Peyerimhoff, 1936 is sunk in synonymy with E. grossipes (Marseul, 1855, syn. n. Lectotypes and paralectotypes, respectively, for Saprinus grossipes Marseul, 1855, Exaesiopus grossipes berberus Peyerimhoff, 1936 and a neotype for Pachylopus glaucus Bickhardt, 1914 are designated. Exaesiopus grossipes is re-described; other species are provided with diagnostic descriptions and supplemented by SEM micrographs, colour images, and line drawings of their male genitalia. A key to species is given. Exaesiopus glaucus (Bickhardt, 1914 is newly recorded from the Republic of South Africa; Exaesiopus torvus Reichardt, 1926 is new to Uzbekistan and Russia; Exaesiopus atrovirens Reichardt, 1926 is new to Ukraine and Tajikistan; and Exaesiopus henoni (Schmidt, 1896 is new to Libya and Djibouti.

  6. Milgrom's revision of cosmic dynamics: Amending Newton's laws or Keplers

    International Nuclear Information System (INIS)

    Felten, J.E.

    1983-12-01

    Milgrom's recent revision of Newtonian dynamics was introduced to eliminate the inference that large quantities of invisible mass exist in galaxies. Simple examples show that a Milgrom acceleration, in the form presented so far, imply other far-reaching changes in dynamics. The momentum of an isolated system is not conserved, and the usual theorem for center-of-mass motion of any system does not hold. Naive applications require extreme caution. The model fails to provide a complete description of particle dynamics and should be thought of as a revision of Kepler's laws rather than Newton's. The Milgrom acceleration also implies fundamental changes in cosmology. A quasi-Newtonian calculation adapted from Newtonian cosmology suggests that a Milgrom universe will recollapse even if the classical closure parameter theta is less than 1. The solution, however, fails to satisfy the cosmological principle. Reasons for the breakdown of this calculation are examined. A theory of gravitation needed before the behavior of a Milgrom universe can be predicted

  7. Milgrom's revision of Newton's laws - Dynamical and cosmological consequences

    Science.gov (United States)

    Felten, J. E.

    1984-01-01

    Milgrom's (1983) recent revision of Newtonian dynamics was introduced to eliminate the inference that large quantities of invisible mass exist in galaxies. It is shown by simple examples that a Milgrom acceleration, in the form presented so far, implies other far-reaching changes in dynamics. The momentum of an isolated system is not conserved, and the usual theorem for center-of-mass motion of any system does not hold. Naive applications require extreme caution. The model fails to provide a complete description of particle dynamics and should be thought of as a revision of Kepler's laws rather than Newton's. The Milgrom acceleration also implies fundamental changes in cosmology. A quasi-Newtonian calculation adapted from Newtonian cosmology suggests that a 'Milgrom universe' will recollapse even if the classical closure parameter Omega is much less than unity. The solution, however, fails to satisfy the cosmological principle. Reasons for the breakdown of this calculation are examined. A new theory of gravitation will be needed before the behavior of a Milgrom universe can be predicted.

  8. Milgrom's revision of cosmic dynamics: Amending Newton's laws or Keplers?

    Science.gov (United States)

    Felten, J. E.

    1983-01-01

    Milgrom's recent revision of Newtonian dynamics was introduced to eliminate the inference that large quantities of invisible mass exist in galaxies. Simple examples show that a Milgrom acceleration, in the form presented so far, imply other far-reaching changes in dynamics. The momentum of an isolated system is not conserved, and the usual theorem for center-of-mass motion of any system does not hold. Naive applications require extreme caution. The model fails to provide a complete description of particle dynamics and should be thought of as a revision of Kepler's laws rather than Newton's. The Milgrom acceleration also implies fundamental changes in cosmology. A quasi-Newtonian calculation adapted from Newtonian cosmology suggests that a Milgrom universe will recollapse even if the classical closure parameter theta is less than 1. The solution, however, fails to satisfy the cosmological principle. Reasons for the breakdown of this calculation are examined. A theory of gravitation needed before the behavior of a Milgrom universe can be predicted.

  9. Hanford Site National Environmental Policy Act (NEPA) Characterization, Revision 15

    Energy Technology Data Exchange (ETDEWEB)

    Neitzel, Duane A.; Bunn, Amoret L.; Burk, Kenneth W.; Cannon, Sandra D.; Duncan, Joanne P.; Fowler, Richard A.; Fritz, Brad G.; Harvey, David W.; Hendrickson, Paul L.; Horton, Duane G.; Last, George V.; Poston, Ted M.; Prendergast-Kennedy, Ellen L.; Reidel, Steve P.; Scott, Michael J.; Thorne, Paul D.; Woody, Dave M.

    2003-09-01

    This document describes the U.S. Department of Energy's (DOE) Hanford Site environment. It is updated each year and is intended to provide a consistent description of the Hanford Site environment for the many National Environmental Policy Act (NEPA) documents being prepared by DOE contractors. No statements of significance or environmental consequences are provided. This year's report is the thirteenth revision of the original document published in 1988 and is (until replaced by the fourteenth revision) the only version that is relevant for use in the preparation of Hanford NEPA, State Environmental Policy Act (SEPA), and Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) documents. The two chapters included in this document (Chapters 4 and 6) are numbered to correspond to the chapters where such information is typically presented in environmental impact statements (Weiss) and other Hanford Site NEPA or CERCLA documentation. Chapter 4.0 (Affected Environment) describes Hanford Site climate and meteorology, geology, hydrology, ecology, cultural, archaeological, and historical resources, socioeconomics, occupational safety, and noise. Chapter 6.0 (Statutory and Regulatory Requirements) describes federal and state laws and regulations, DOE directives and permits, and presidential executive orders that are applicable to the NEPA documents prepared for Hanford Site activities.

  10. Land reclamation program description

    Energy Technology Data Exchange (ETDEWEB)

    None

    1977-05-01

    The Land Reclamation Program will address the need for coordinated applied and basic research into the physical and ecological problems of land reclamation, and advance the development of cost-effective techniques for reclaiming and rehabilitating mined coal land to productive end uses. The purpose of this new program is to conduct integrated research and development projects focused on near- and long-term reclamation problems in all major U.S. coal resource regions including Alaska and to coordinate, evaluate, and disseminate the results of related studies conducted at other research institutions. The activities of the Land Reclamation Laboratory program will involve close cooperation with industry and focus on establishing a comprehensive field and laboratory effort. Research demonstration sites will be established throughout the United States to address regional and site-specific problems. Close cooperation with related efforts at academic institutions and other agencies, to transfer pertinent information and avoid duplication of effort, will be a primary goal of the program. The major effort will focus on the complete coal extraction/reclamation cycle where necessary to develop solutions to ameliorating the environmental impacts of coal development. A long-range comprehensive national reclamation program will be established that can schedule and prioritize research activities in all of the major coal regions. A fully integrated data management system will be developed to store and manage relevant environmental and land use data. Nine research demonstration sites have been identified.

  11. Semantic Web Compatible Names and Descriptions for Organisms

    Science.gov (United States)

    Wang, H.; Wilson, N.; McGuinness, D. L.

    2012-12-01

    Modern scientific names are critical for understanding the biological literature and provide a valuable way to understand evolutionary relationships. To validly publish a name, a description is required to separate the described group of organisms from those described by other names at the same level of the taxonomic hierarchy. The frequent revision of descriptions due to new evolutionary evidence has lead to situations where a single given scientific name may over time have multiple descriptions associated with it and a given published description may apply to multiple scientific names. Because of these many-to-many relationships between scientific names and descriptions, the usage of scientific names as a proxy for descriptions is inevitably ambiguous. Another issue lies in the fact that the precise application of scientific names often requires careful microscopic work, or increasingly, genetic sequencing, as scientific names are focused on the evolutionary relatedness between and within named groups such as species, genera, families, etc. This is problematic to many audiences, especially field biologists, who often do not have access to the instruments and tools required to make identifications on a microscopic or genetic basis. To better connect scientific names to descriptions and find a more convenient way to support computer assisted identification, we proposed the Semantic Vernacular System, a novel naming system that creates named, machine-interpretable descriptions for groups of organisms, and is compatible with the Semantic Web. Unlike the evolutionary relationship based scientific naming system, it emphasizes the observable features of organisms. By independently naming the descriptions composed of sets of observational features, as well as maintaining connections to scientific names, it preserves the observational data used to identify organisms. The system is designed to support a peer-review mechanism for creating new names, and uses a controlled

  12. Revision of infected knee arthroplasties in Denmark

    DEFF Research Database (Denmark)

    Lindberg-Larsen, Martin; Jørgensen, Christoffer C; Bagger, Jens

    2016-01-01

    Background and purpose - The surgical treatment of periprosthetic knee infection is generally either a partial revision procedure (open debridement and exchange of the tibial insert) or a 2-stage exchange arthroplasty procedure. We describe the failure rates of these procedures on a nationwide...... basis. Patients and methods - 105 partial revisions (100 patients) and 215 potential 2-stage revision procedures (205 patients) performed due to infection from July 1, 2011 to June 30, 2013 were identified from the Danish Knee Arthroplasty Register (DKR). Failure was defined as surgically related death...

  13. A taxonomic review of the genus Horniolus Weise from China, with description of a new species (Coleoptera, Coccinellidae

    Directory of Open Access Journals (Sweden)

    Xiaosheng Chen

    2016-10-01

    Full Text Available Five species of the genus Horniolus Weise, 1901 from China are revised, including the description of a new species, Horniolus hainanensis Chen & Ren, sp. n. Horniolus sonduongensis Hoàng, 1979 is reported from China for the first time. A key to the species from China is provided. Nomenclatural history, diagnoses, detailed descriptions, illustrations, and distribution for each species have been provided. A checklist of all known species of this genus is also presented.

  14. Descriptive catalogue of radioactive waste families

    International Nuclear Information System (INIS)

    2004-01-01

    This document describes the different types of radioactive wastes produced in France or which are expected to be produced in the future. The wastes have been shared into different families having similar characteristics. A description is made for each family: general presentation, photos, position of the family in the French classification, industrial origin, status of production. Some informations about the raw waste and its conditioning process are also given. The qualitative description is completed by some numerical data like: the quantity produced in the past and to be produced in the future, the evaluation of the radioactivity in 2002 and 2020, and the evaluation of the thermal power when it exists. Finally, some informations are given about the risk of toxicity of some chemical species or compounds. (J.S.)

  15. Parametric description of the quantum measurement process

    Science.gov (United States)

    Liuzzo-Scorpo, P.; Cuccoli, A.; Verrucchi, P.

    2015-08-01

    We present a description of the measurement process based on the parametric representation with environmental coherent states. This representation is specifically tailored for studying quantum systems whose environment needs being considered through the quantum-to-classical crossover. Focusing upon projective measures, and exploiting the connection between large-N quantum theories and the classical limit of related ones, we manage to push our description beyond the pre-measurement step. This allows us to show that the outcome production follows from a global-symmetry breaking, entailing the observed system's state reduction, and that the statistical nature of the process is brought about, together with the Born's rule, by the macroscopic character of the measuring apparatus.

  16. Individual questions of financial control and revision

    Directory of Open Access Journals (Sweden)

    В. М. Глібко

    2015-05-01

    Full Text Available Problem setting. In modern conditions at investigation and gathering of proofs in criminal proceedings according to item 93 CPC of Ukraine collecting of proofs which is carried out by the criminal proceedings parties, victim is important, the representative of the legal person, in which relation carries out manufacture, including a way истребования and receptions from public authorities, local governments, the enterprises, establishments and organisations, official and physical persons of things, documents, data, conclusions of experts, conclusions of revisions and certificates of checks. Recent research and publications analisis. In scientific sources questions of carrying out of revisions S. B.Zhivko, V.V.Akimov, G.Demjanchuk, J.Buzdugan is considered. Paper objective. Article purpose is studying and definition of a place of revision among forms of inspection of the state control and use of results of revision in criminal proceedings. Paper main body. Off-schedule exit revision that is revision which is not provided in plans of work of body of the state financial control is considered and is spent at presence at least one of the circumstances listed in item 11 of the Law of Ukraine «About main principles of realisation of the state financial control in Ukraine». If revision is carried out on request of investigating bodies it is spent on the basis of the petition of the inspector and accepted by the results of consideration of this petition of the decision of the investigatory judge. The primary goal of revision on request of investigating bodies or on the basis of court definition is reception of proofs on business. Therefore the revision certificate admits the written proof as on the basis of its conclusion of the inspector, the public prosecutor receives the information on a perfect crime, abusing, and also on the persons who have committed a crime, on the period of commission of crime and an amount of damage. In criminal

  17. The management of radioactive waste. A description of ten countries

    International Nuclear Information System (INIS)

    Lidskog, Rolf; Andersson, Ann-Catrin

    2002-01-01

    The aim of this report is to provide a description of how the responsible authorities/companies in ten EDRAM countries (International Association for Environmentally Safe Disposal of Radioactive Materials) deal with the management of radioactive waste. The focus is on how the responsible organisation currently handles this issue, including technical, economic and socio-political aspects. The material used was primarily produced by the companies/authorities themselves. The report describes the development and situation in each country up to the end of 2001, or later if noted as such in the country report. The scope of this report does not permit an evaluation of how successful and effective the companies and authorities have been in implementing their plans and ambitions. The report does not include the views of other national stakeholders concerning radwaste management, or their opinions of the way that the authorities/companies handle the issue of radwaste. The description is based on a series of questions that were drawn up and discussed at the initial stage of the EDRAM co-operation. Technological aspects: 1. What technology is used? How is research and development promoted and executed? 2. Where is the waste to be put? What criteria does each country search for? 3. How is security to be maintained? Who can obtain a license for handling nuclear waste? Economic aspects: 1. In what way do the countries in question discuss the time aspects as regards delays and similar? 2. How are the economic and financial aspects of the process dealt with? Where does the money come from? Socio-political aspects: 4. What role do politicians play and to what extent is social acceptance a part of the process? What part does public opinion play? 5. How flexible is the decision-making process and can decisions be revised? 6. Does the public have confidence in the industry and the decision-makers? 7. What kind of institutional problems arise? With regard to public involvement in

  18. Macroeconomics and Public Policy. Revision.

    Science.gov (United States)

    1984-04-01

    firms and government. Consumer preferences are determined by the personal util- ity that individuals assign to the products available for purchase in...demanded rises. At the same time, the consumer demand curve for a product may shift one way or the other as consumer preferences , prices of other products...services respond. Their response sets into motion a sequence of events that has a profound impact on an econ- omy. Consumer preferences in the

  19. Development of the methodology for application of revised source term to operating nuclear power plants in Korea

    International Nuclear Information System (INIS)

    Kang, M.S.; Kang, P.; Kang, C.S.; Moon, J.H.

    2004-01-01

    Considering the current trend in applying the revised source term proposed by NUREG-1465 to the nuclear power plants in the U.S., it is expected that the revised source term will be applied to the Korean operating nuclear power plants in the near future, even though the exact time can not be estimated. To meet the future technical demands, it is necessary to prepare the technical system including the related regulatory requirements in advance. In this research, therefore, it is intended to develop the methodology to apply the revised source term to operating nuclear power plants in Korea. Several principles were established to develop the application methodologies. First, it is not necessary to modify the existing regulations about source term (i.e., any back-fitting to operating nuclear plants is not necessary). Second, if the pertinent margin of safety is guaranteed, the revised source term suggested by NUREG-1465 may be useful to full application. Finally, a part of revised source term could be selected to application based on the technical feasibility. As the results of this research, several methodologies to apply the revised source term to the Korean operating nuclear power plants have been developed, which include: 1) the selective (or limited) application to use only some of all the characteristics of the revised source term, such as release timing of fission products and chemical form of radio-iodine and 2) the full application to use all the characteristics of the revised source term. The developed methodologies are actually applied to Ulchin 9 and 4 units and their application feasibilities are reviewed. The results of this research are used as either a manual in establishing the plan and the procedure for applying the revised source term to the domestic nuclear plant from the utility's viewpoint; or a technical basis of revising the related regulations from the regulatory body's viewpoint. The application of revised source term to operating nuclear

  20. Taxation and Welfare: A Revision Exercise.

    Science.gov (United States)

    Boden, Andrew

    1992-01-01

    Offers a revision exercise intended to remind students of some economic terminology associated with taxation and welfare. Provides a set of definitions for which students are to supply matching terms. Includes an answer list and suggests related exercises. (SG)

  1. Student-initiated revision in child health.

    Science.gov (United States)

    Alfaham, M; Gray, O P; Davies, D P

    1994-03-01

    Most teaching of child health in Cardiff takes place in block attachments of 8 weeks. There is an introductory seminar of 2 days followed by a 6-week clinical attachment in a district general hospital in Wales, and then a revision period of one week designed to help students formalize and structure their basic knowledge and to clarify aspects of child health which they may have had difficulty in understanding. The revision programme has to take into account: the short time available, the small number of teaching staff, the most relevant basic knowledge and active participation by the student. This paper describes how this week has been improved through the use of student-initiated revision (SIR). The students' appraisal of this revision and in particular SIR is presented.

  2. FFTF operations procedures preparation guide. Revision 2

    International Nuclear Information System (INIS)

    1976-12-01

    The Guide is intended to provide guidelines for the initial preparation of FFTF Operating Procedures. The Procedures Preparation Guide was developed from the plan presented and approved in the FFTF Reactor Plant Procedures Plan, PC-1, Revision 3

  3. Revising incompletely specified convex probabilistic belief bases

    CSIR Research Space (South Africa)

    Rens, G

    2016-04-01

    Full Text Available revision employing the notion of optimum entropy, and point out some of the benefits and difficulties in those methods. Both the boundary distribution method and the optimum entropy method are reasonable, yet yield different results....

  4. Descriptor revision belief change through direct choice

    CERN Document Server

    Hansson, Sven Ove

    2017-01-01

    This book provides a critical examination of how the choice of what to believe is represented in the standard model of belief change. In particular the use of possible worlds and infinite remainders as objects of choice is critically examined. Descriptors are introduced as a versatile tool for expressing the success conditions of belief change, addressing both local and global descriptor revision. The book presents dynamic descriptors such as Ramsey descriptors that convey how an agent’s beliefs tend to be changed in response to different inputs. It also explores sentential revision and demonstrates how local and global operations of revision by a sentence can be derived as a special case of descriptor revision. Lastly, the book examines revocation, a generalization of contraction in which a specified sentence is removed in a process that may possibly also involve the addition of some new information to the belief set.

  5. Health Topic XML File Description

    Science.gov (United States)

    ... this page: https://medlineplus.gov/xmldescription.html Health Topic XML File Description: MedlinePlus To use the sharing ... information categories assigned. Example of a Full Health Topic Record A record for a MedlinePlus health topic ...

  6. NRC revision to 10 CFR Part 20

    International Nuclear Information System (INIS)

    Baker, R.E.; Cool, W.S.; Mills, W.A.

    1983-01-01

    The Nuclear Regulatory Commission's pollution standards have been revised since publication in the late 1950s, but the basic approach has not changed. The revisions resulted in inaccuracies, conflicts, and ambiguities in requirements. The need for comprehensive updating including radiation-protection principles, risk, occupational exposure dose limits, standards for the public (including de minimis level), surveys and monitoring, disposal into sewerage systems, and records is discussed. 2 tables

  7. Revised data taking schedule with ion beams

    CERN Document Server

    Gazdzicki, Marek; Aduszkiewicz, A; Andrieu, B; Anticic, T; Antoniou, N; Argyriades, J; Asryan, A G; Baatar, B; Blondel, A; Blumer, J; Boldizsar, L; Bravar, A; Brzychczyk, J; Bubak, A; Bunyatov, S A; Choi, K U; Christakoglou, P; Chung, P; Cleymans, J; Derkach, D A; Diakonos, F; Dominik, W; Dumarchez, J; Engel, R; Ereditato, A; Feofilov, G A; Fodor, Z; Ferrero, A; Gazdzicki, M; Golubeva, M; Grebieszkow, K; Grzeszczuk, A; Guber, F; Hasegawa, T; Haungs, A; Igolkin, S; Ivanov, A S; Ivashkin, A; Kadija, K; Katrynska, N; Kielczewska, D; Kikola, D; Kisiel, J; Kobayashi, T; Kolesnikov, V I; Kolev, D; Kolevatov, R S; Kondratiev, V P; Kowalski, S; Kurepin, A; Lacey, R; Laszlo, A; Lyubushkin, V V; Majka, Z; I Malakhov, A; Marchionni, A; Marcinek, A; Maris, I; Matveev, V; Melkumov, G L; Meregaglia, A; Messina, M; Mijakowski, P; Mitrovski, M; Montaruli, T; Mrówczynski, St; Murphy, S; Nakadaira, T; Naumenko, P A; Nikolic, V; Nishikawa, K; Palczewski, T; Pálla, G; Panagiotou, A D; Peryt, W; Planeta, R; Pluta, J; Popov, B A; Posiadala, M; Przewlocki, P; Rauch, W; Ravonel, M; Renfordt, R; Röhrich, D; Rondio, E; Rossi, B; Roth, M; Rubbia, A; Rybczynski, M; Sadovskii, A; Sakashita, K; Schuster, T; Sekiguchi, T; Seyboth, P; Shibata, M; Sissakian, A N; Skrzypczak, E; Slodkowski, M; Sorin, A S; Staszel, P; Stefanek, G; Stepaniak, J; Strabel, C; Ströbele, H; Susa, T; Szentpétery, I; Szuba, M; Tada, M; Taranenko, A; Tsenov, R; Ulrich, R; Unger, M; Vassiliou, M; Vechernin, V V; Vesztergombi, G; Wlodarczyk, Z; Wojtaszek, A; Zipper, W; CERN. Geneva. SPS and PS Experiments Committee; SPSC

    2009-01-01

    This document presents the revised data taking schedule of NA61 with ion beams. The revision takes into account limitations due to the new LHC schedule as well as final results concerning the physics performance with secondary ion beams. It is proposed to take data with primary Ar and Xe beams in 2012 and 2014, respectively, and to test and use for physics a secondary B beam from primary Pb beam fragmentation in 2010, 2011 and 2013.

  8. Introductory Business Textbook Revision Cycles: Are They Getting Shorter?

    Science.gov (United States)

    Zinser, Brian; Brunswick, Gary

    2010-01-01

    The rate of textbook revision cycles is examined in light of the recent trend towards more rapid revisions (and adoptions of textbooks). The authors conduct background research to better understand the context for textbook revision cycles and the environmental forces that have been influencing what appears to be more rapid textbook revisions. A…

  9. Back to Sports After Arthroscopic Revision Bankart Repair.

    Science.gov (United States)

    Buckup, Johannes; Welsch, Frederic; Gramlich, Yves; Hoffmann, Reinhard; Roessler, Philip P; Schüttler, Karl F; Stein, Thomas

    2018-02-01

    Recurrent instability following primary arthroscopic stabilization of the shoulder is a common complication. Young, athletic patients are at the greatest risk of recurring instability. To date, the literature contains insufficient description regarding whether return to sports is possible after revision arthroscopic Bankart repair. Patients presenting with recurrent instability after primary arthroscopic stabilization should expect limitations in terms of their ability to partake in sporting activities after revision surgery. Case series; Level of evidence, 4. Twenty athletes who underwent arthroscopic revision stabilization of the shoulder after failed primary arthroscopic Bankart repair were included in the study after completing inclusion and exclusion criteria surveys. Athletic Shoulder Outcome Scoring System (ASOSS), Shoulder Sport Activity Score (SSAS), and the Subjective Patient Outcome for Return to Sports (SPORTS) scores were determined to assess the participants' ability to partake in sporting activities. Furthermore, sport type and sport level were classified and recorded. To assess function and stability, Rowe, American Shoulder and Elbow Surgeons, Constant-Murley, and Walch-Duplay scores were measured and recorded. Follow-up consultations were carried out after a mean of 28.7 months. The mean age at follow-up examination was 27.75 years. At the time of follow-up, 70% of the patients were able to return to their original sporting activities at the same level. However, 90% of patients described a limitation in their shoulder when participating in their sports. At 28.7 months after surgery, the mean ASOSS score was 76.8; the SSAS score decreased from 7.85 before first-time dislocation to 5.35 at follow-up ( P SPORTS score was 5.2 out of 10 at the follow-up consultation. Function- and instability-specific scores showed good to excellent results. The mean external rotational deficit for high external rotation was 9.25°, and for low external rotation it was

  10. Students’ Perception toward the Implementation of Peer-Assessment in Writing; Before and After Revision

    Directory of Open Access Journals (Sweden)

    Husni Mubarok

    2017-10-01

    Full Text Available This study was aimed at elaborating students’ perception toward the implementation of peer assessment in writing class either before or after revision. Writing becomes one of skills which should be mastered by students in order to get higher level of literacy. Writing is a productive skill which asks students to arrange words and organize them into good writing which could be understood by readers. The success of writing is determined by the writing process itself starting from planning, first draft writing, revising, and editing. One of the strategies used in teaching writing is by implementing peer assessment. Peer assessment strategy becomes one of important parts in the process of writing because there will be feedback or suggestion from peers in doing a review. The number of the subject of this research was students in second semester of the English Education Department of UNISNU Jepara. This research was conducted on even semester. The total number of the students, which became respondents, was 37 students of English Education Department. The research design used was qualitative research which measured students’ perceptions of the implementation of peer assessment in writing: before and after revision. The result showed that before revision, students had negative perception toward their own writing. After revision, they had positive perceptions toward peer assessment strategy. Those included usefulness and meaningfulness, nature of feedback, reality of feedback, precision, validity, fairness, and personal goal-setting. Besides that, the score after revision (7.9 was higher than the score before revision (6.62. It meant that the result showed the increasing of students’ score after revision.

  11. Revision surgery for failed thermal capsulorrhaphy.

    Science.gov (United States)

    Park, Hyung Bin; Yokota, Atsushi; Gill, Harpreet S; El Rassi, George; McFarland, Edward G

    2005-09-01

    With the failure of thermal capsulorrhaphy for shoulder instability, there have been concerns with capsular thinning and capsular necrosis affecting revision surgery. To report the findings at revision surgery for failed thermal capsulorrhaphy and to evaluate the technical effects on subsequent revision capsular plication. Case series; Level of evidence, 4. Fourteen patients underwent arthroscopic evaluation and open reconstruction for a failed thermal capsulorrhaphy. The cause of the failure, the quality of the capsule, and the ability to suture the capsule were recorded. The patients were evaluated at follow-up for failure, which was defined as recurrent subluxations or dislocations. The origin of the instability was traumatic (n = 6) or atraumatic (n = 8). At revision surgery in the traumatic group, 4 patients sustained failure of the Bankart repair with capsular laxity, and the others experienced capsular laxity alone. In the atraumatic group, all patients experienced capsular laxity as the cause of failure. Of the 14 patients, the capsule quality was judged to be thin in 5 patients and ablated in 1 patient. A glenoid-based capsular shift could be accomplished in all 14 patients. At follow-up (mean, 35.4 months; range, 22 to 48 months), 1 patient underwent revision surgery and 1 patient had a subluxation, resulting in a failure rate of 14%. Recurrent capsular laxity after failed thermal capsular shrinkage is common and frequently associated with capsular thinning. In most instances, the capsule quality does not appear to technically affect the revision procedure.

  12. HERMES II experimenters' manual (revised)

    International Nuclear Information System (INIS)

    Schuch, R.L.

    1977-04-01

    The HERMES II is a high-intensity laboratory photon source for gamma-ray radiation effects experiments as well as a high-energy pulsed electron beam generator for a variety of potential applications. The purpose of this manual is to serve as a basic source of information for prospective users of HERMES. Included is a brief discussion of the design and operation of the accelerator system as well as a summary of environmental data for x-ray operation and output characteristics for electron beam modes. The manual also contains a description of the HERMES experimental facilities, including geometry of the test cell, instrumentation and data collection capabilities, and services and support available to experimenters

  13. 75 FR 2846 - Plan Revision for Prescott National Forest, Yavapai and Coconino Counties, AZ

    Science.gov (United States)

    2010-01-19

    .... Finally, this notice briefly describes the applicable planning rule and how work done on the plan revision... addressed project specific needs and the balance addressed programmatic needs. Programmatic needs for... guidelines; Suitability of lands for timber production, grazing, and recreation opportunities; Monitoring and...

  14. 77 FR 36477 - Notice of Intent To Revise and Extend a Currently Approved Information Collection

    Science.gov (United States)

    2012-06-19

    ... Reports. Revision to burden hours will be needed due to changes in the size of the target population... Agriculture to help administer programs; by State agencies to develop, research, and promote the marketing of products; and by producers to find their best market opportunity(s). The current expiration date for this...

  15. 77 FR 70142 - Initialed Draft Revision to the Agreement Suspending the Antidumping Investigation on Certain Hot...

    Science.gov (United States)

    2012-11-23

    ... the Agreement Suspending the Antidumping Investigation on Certain Hot-Rolled Flat-Rolled Carbon... revision to the Agreement Suspending the Antidumping Investigation on Certain Hot-Rolled Flat-Rolled Carbon...'') investigation on hot-rolled flat-rolled carbon-quality steel products (``hot-rolled steel'') from the Russian...

  16. 75 FR 32355 - Notice of Request for Revision of a Currently Approved Information Collection

    Science.gov (United States)

    2010-06-08

    .... Expiration Date of Approval: November 30, 2010. Type of Request: Revision of a currently approved information... retailers to market product. The Agricultural Marketing Act of 1946 (7 U.S.C. 1621-1627), section 203(g... ornamental trade, which includes packers, processors, brokers, retailers, producers, and associated...

  17. 78 FR 74229 - Medicare Program; Revisions to Payment Policies Under the Physician Fee Schedule, Clinical...

    Science.gov (United States)

    2013-12-10

    ... MFP Multi-Factor Productivity MGMA Medical Group Management Association MIEA-TRHCA The Medicare... 69624), we revised the methodology for calculating direct PE RVUs from the top- down to the bottom-up... Based on RVUs To calculate the payment for each physicians' service, the components of the fee schedule...

  18. A Selected List of Urban, Environmental and Social Problem Gaming/Simulations. Revised Edition.

    Science.gov (United States)

    Steinwachs, Barbara

    This revised list includes games/simulations for all age levels, though often most applicable at the secondary through adult levels. In her reviews of available products, the author limited her listings to those games/simulations which are useful for educational purposes and which focus directly on social concerns relative to urban and…

  19. Cross-Talk in Comp Theory: A Reader. Second Edition, Revised and Updated.

    Science.gov (United States)

    Villanueva, Victor, Ed.

    This revised and updated resource contains a total of 43 essays that serve to initiate graduate students and more experienced teachers into the theories that inform composition studies. Under Section One--The Givens in Our Conversations: The Writing Process--are these essays: "Teach Writing as a Process Not Product" (Donald M. Murray);…

  20. Speaker diarization and speech recognition in the semi-automatization of audio description: An exploratory study on future possibilities?

    Directory of Open Access Journals (Sweden)

    Héctor Delgado

    2015-12-01

    Full Text Available This article presents an overview of the technological components used in the process of audio description, and suggests a new scenario in which speech recognition, machine translation, and text-to-speech, with the corresponding human revision, could be used to increase audio description provision. The article focuses on a process in which both speaker diarization and speech recognition are used in order to obtain a semi-automatic transcription of the audio description track. The technical process is presented and experimental results are summarized.

  1. Speaker diarization and speech recognition in the semi-automatization of audio description: An exploratory study on future possibilities?

    Directory of Open Access Journals (Sweden)

    Héctor Delgado

    2015-06-01

    This article presents an overview of the technological components used in the process of audio description, and suggests a new scenario in which speech recognition, machine translation, and text-to-speech, with the corresponding human revision, could be used to increase audio description provision. The article focuses on a process in which both speaker diarization and speech recognition are used in order to obtain a semi-automatic transcription of the audio description track. The technical process is presented and experimental results are summarized.

  2. Postoperative pain outcomes after transvaginal mesh revision.

    Science.gov (United States)

    Danford, Jill M; Osborn, David J; Reynolds, W Stuart; Biller, Daniel H; Dmochowski, Roger R

    2015-01-01

    Although the current literature discusses mesh complications including pain, as well as suggesting different techniques for removing mesh, there is little literature regarding pain outcomes after surgical removal or revision. The purpose of this study is to determine if surgical removal or revision of vaginal mesh improves patient's subjective complaints of pelvic pain associated with original placement of mesh. After obtaining approval from the Vanderbilt University Medical Center Institutional Review Board, a retrospective review of female patients with pain secondary to previous mesh placement who underwent excision or revision of vaginal mesh from January 2000 to August 2012 was performed. Patient age, relevant medical history including menopause status, previous hysterectomy, smoking status, and presence of diabetes, fibromyalgia, interstitial cystitis, and chronic pelvic pain, was obtained. Patients' postoperative pain complaints were assessed. Of the 481 patients who underwent surgery for mesh revision, removal or urethrolysis, 233 patients met our inclusion criteria. One hundred and sixty-nine patients (73 %) reported that their pain improved, 19 (8 %) reported that their pain worsened, and 45 (19 %) reported that their pain remained unchanged after surgery. Prior history of chronic pelvic pain was associated with increased risk of failure of the procedure to relieve pain (OR 0.28, 95 % CI 0.12-0.64, p = 0.003). Excision or revision of vaginal mesh appears to be effective in improving patients' pain symptoms most of the time. Patients with a history of chronic pelvic pain are at an increased risk of no improvement or of worsening pain.

  3. Revised estimates for ozone reduction by shuttle operation

    Science.gov (United States)

    Potter, A. E.

    1978-01-01

    Previous calculations by five different modeling groups of the effect of space shuttle operations on the ozone layer yielded an estimate of 0.2 percent ozone reduction for the Northern Hemisphere at 60 launches per year. Since these calculations were made, the accepted rate constant for the reaction between hydroperoxyl and nitric oxide to yield hydroxyl and nitrogen dioxide, HO2 + NO yields OH + NO2, was revised upward by more than an order of magnitude, with a resultant increase in the predicted ozone reduction for chlorofluoromethanes by a factor of approximately 2. New calculations of the shuttle effect were made with use of the new rate constant data, again by five different modeling groups. The new value of the shuttle effect on the ozone layer was found to be 0.25 percent. The increase resulting from the revised rate constant is considerably less for space shuttle operations than for chlorofluoromethane production, because the new rate constant also increases the calculated rate of downward transport of shuttle exhaust products out of the stratosphere.

  4. Single-shell tank closure work plan. Revision A

    International Nuclear Information System (INIS)

    1995-06-01

    In January 1994, the Hanford Federal Facility Agreement and Conset Order (Tri-Party Agreement) was amended to reflect a revised strategy for remediation of radioactive waste in underground storage tanks. These amendments include milestones for closure of the single-shell tank (SST) operable units, to be initiated by March 2012 and completed by September 2024. This SST-CWP has been prepared to address the principal topical areas identified in Tri-Party Agreement Milestone M-45-06 (i.e., regulatory pathway, operable unit characterization, waste retrieval, technology development, and a strategy for achieving closure). Chapter 2.0 of this SST-CWP provides a brief description of the environmental setting, SST System, the origin and characteristics of SST waste, and ancillary equipment that will be remediated as part of SST operable unit closure. Appendix 2A provides a description of the hydrogeology of the Hanford Site, including information on the unsaturated sediments (vadose zone) beneath the 200 Areas Plateau. Chapter 3.0 provides a discussion of the laws and regulations applicable to closure of the SST farm operable units. Chapter 4.0 provides a summary description of the ongoing characterization activities that best align with the proposed regulatory pathway for closure. Chapter 5.0 describes aspects of the SST waste retrieval program, including retrieval strategy, technology, and sequence, potential tank leakage during retrieval, and considerations of deployment of subsurface barriers. Chapter 6.0 outlines a proposed strategy for closure. Chapter 7.0 provides a summary of the programs underway or planned to develop technologies to support closure. Ca. 325 refs

  5. Single-shell tank closure work plan. Revision A

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-06-01

    In January 1994, the Hanford Federal Facility Agreement and Conset Order (Tri-Party Agreement) was amended to reflect a revised strategy for remediation of radioactive waste in underground storage tanks. These amendments include milestones for closure of the single-shell tank (SST) operable units, to be initiated by March 2012 and completed by September 2024. This SST-CWP has been prepared to address the principal topical areas identified in Tri-Party Agreement Milestone M-45-06 (i.e., regulatory pathway, operable unit characterization, waste retrieval, technology development, and a strategy for achieving closure). Chapter 2.0 of this SST-CWP provides a brief description of the environmental setting, SST System, the origin and characteristics of SST waste, and ancillary equipment that will be remediated as part of SST operable unit closure. Appendix 2A provides a description of the hydrogeology of the Hanford Site, including information on the unsaturated sediments (vadose zone) beneath the 200 Areas Plateau. Chapter 3.0 provides a discussion of the laws and regulations applicable to closure of the SST farm operable units. Chapter 4.0 provides a summary description of the ongoing characterization activities that best align with the proposed regulatory pathway for closure. Chapter 5.0 describes aspects of the SST waste retrieval program, including retrieval strategy, technology, and sequence, potential tank leakage during retrieval, and considerations of deployment of subsurface barriers. Chapter 6.0 outlines a proposed strategy for closure. Chapter 7.0 provides a summary of the programs underway or planned to develop technologies to support closure. Ca. 325 refs.

  6. Digital Representation for Communication of Product Definition Data. Revision

    Science.gov (United States)

    1990-04-30

    SToru Kato Toyota Motors Dewayne Kelley Menasco Michael Kelley Auto-Trol Technology J.C. Kelly Sandia National Laboratorit’s Debbie Kengott AutoTrol...S and B defined as follows: C(t) SoB(t) SS(B(t)) A= SWOt , Vt)) S(x(u(t), v(1)), y(u(t), v(t)), z(u(t), v(I)) ) a < t < b. The curve B lies in the two

  7. Description and drawing of a mini-plant to lead-acid batteries active material production; Descricao e desenho de uma mini-planta piloto para producao de material ativo para baterias de chumbo-acido

    Energy Technology Data Exchange (ETDEWEB)

    D` Alkaine, C V; Mattos, J S.D.; Machado, D M; Nart, F C [Sao Carlos Univ., SP (Brazil). Dept. de Quimica

    1985-12-31

    As a part of the UFSCAR/Solar Energy/FINEP program, a pilot plant for the production of the active material for lead-acid batteries was developed. The basic operations are: milling and lead oxidation in ball mill, classifying of lead monoxide in the proper particle size by means of a cyclone, monoxide mixture with water and sulphuric acid, thus forming the paste. The paste is then placed on grids and finally scrapped and compacted. The plates pass through a 300 deg C oven and are cured in controlled atmosphere. (author). 4 refs

  8. Energy 83. Revised and Expanded.

    Science.gov (United States)

    Lord, John, Ed.

    Energy 80 is an energy education program for middle/junior high school students. This document is a booklet of energy topics designed for student use in the program. Topics considered in this booklet include: forms of energy; energy rules; solar energy; food energy; fossil fuels; coal; oil and gas production and consumption; nuclear fission;…

  9. Diagnosing parathyroid glands: a revision

    International Nuclear Information System (INIS)

    Soroa, V.E.; Rank, G.

    2015-01-01

    Descriptions of the different benign parathyroid pathologies: primary, secondary and tertiary hyperparathyroidism and the possible diagnostic nuclear medicine techniques. We discuss the different acquisition modalities: planar, pinhole, subtraction, SPECT, SPECT/CT and PET/CT. Optimal recommendations for the patient preparation and acquisition, as well as false positive and negative results are also mentioned. Radiopharmaceuticals dosimetry is included. Statements related to other imaging modalities and the one with highest specificity: Ultrasound plus Nuclear Medicine. Emphasize of optimal results of the dual Phase 99m Tc-Setamibi in SPECT and the best selection with SPECT/CT, if available. Mention is done of the curative surgical treatment and the selective venous PTH sampling (excellent result if pre-surgical levels descended to 50 %, circumstances of false outcomes are also presented). Brief enumeration of PET/CT compounds, as another possibility that still has to proof its role in the diagnostic armamentarium of parathyroid pathology. Conclusion: The best diagnostic performance has been obtained with 99m Tc-Sestamibi in SPECT/CT as well as with the subtraction 131 I / 99m Tc-Sestamibi or 99m Tc-pertecneciate/ 99m Tc-Sestamibi methods. Nuclear Medicine is relevant in pointing parathyroid pathology in the surgical act and for a second look re-intervention. PET/CT radiopharmaceuticals are other possibilities that must still demonstrate its value in the diagnostic armamentarium of parathyroid pathologies. (authors) [es

  10. Hanford Site technical baseline database. Revision 1

    International Nuclear Information System (INIS)

    Porter, P.E.

    1995-01-01

    This report lists the Hanford specific files (Table 1) that make up the Hanford Site Technical Baseline Database. Table 2 includes the delta files that delineate the differences between this revision and revision 0 of the Hanford Site Technical Baseline Database. This information is being managed and maintained on the Hanford RDD-100 System, which uses the capabilities of RDD-100, a systems engineering software system of Ascent Logic Corporation (ALC). This revision of the Hanford Site Technical Baseline Database uses RDD-100 version 3.0.2.2 (see Table 3). Directories reflect those controlled by the Hanford RDD-100 System Administrator. Table 4 provides information regarding the platform. A cassette tape containing the Hanford Site Technical Baseline Database is available

  11. Emended description of Pasteuria nishizawae.

    Science.gov (United States)

    Noel, Gregory R; Atibalentja, N; Domier, Leslie L

    2005-07-01

    The description of the Gram-positive, obligately parasitic, mycelial and endospore-forming bacterium, Pasteuria nishizawae, is emended to include additional observations on the life cycle, host specificity and endospore morphology. The nucleotide sequence of the 16S rRNA gene is also provided.

  12. Manufacturer Usage Description Specification Implementation

    OpenAIRE

    Srinivasan, Kaushik

    2017-01-01

    Manufacturer Usage Description Specification (MUDS) is aframework under RFC development that aims to automate Internet access control rules for IoT devices . These access controls prevent malicious IoT devices from attacking other devices and also protect the IoT devices from being attacked by other devices.We are implementing this framework and trying to improve its security.

  13. Epsilon. A System Description Language

    DEFF Research Database (Denmark)

    Jensen, Kurt; Kyng, Morten

    This paper discusses the use of Petri nets as a semantic tool in the design of languages and in the construction and analysis of system descriptions. The topics treated are: -- Languages based on nets. -- The problem of time in nets. -- Nets and related models. -- Nets and formal semantics...

  14. Microscopic description of nuclear reactions

    International Nuclear Information System (INIS)

    Gorbatov, A.M.

    1992-01-01

    The genealogical series method has been extended to the continuous spectrum of the many-body systems. New nonlinear integral equations have been formulated to perform the microscopical description of the nuclear reactions with arbitrary number of particles. The way to solve them numerically is demonstrated

  15. Improving Published Descriptions of Germplasm.

    Science.gov (United States)

    Published descriptions of new germplasm, such as in the Journal of Plant Registrations (JPR) and, prior to mid-2007, in Crop Science, are important vehicles for allowing researchers and other interested parties to learn about such germplasm and the methods used to generate them. Launched in 2007, JP...

  16. NOAA Weather Radio - EAS Description

    Science.gov (United States)

    Non-Zero All Hazards Logo Emergency Alert Description Event Codes Fact Sheet FAQ Organization Search Search For Go NWS All NOAA Emergency Alert System (EAS) List of EAS Event Codes NWS EAS fact sheet What Management Agency (FEMA) and the NWS, implements the EAS at the federal level. The EAS is the nation's public

  17. Natural Language Description of Emotion

    Science.gov (United States)

    Kazemzadeh, Abe

    2013-01-01

    This dissertation studies how people describe emotions with language and how computers can simulate this descriptive behavior. Although many non-human animals can express their current emotions as social signals, only humans can communicate about emotions symbolically. This symbolic communication of emotion allows us to talk about emotions that we…

  18. The geometry description markup language

    International Nuclear Information System (INIS)

    Chytracek, R.

    2001-01-01

    Currently, a lot of effort is being put on designing complex detectors. A number of simulation and reconstruction frameworks and applications have been developed with the aim to make this job easier. A very important role in this activity is played by the geometry description of the detector apparatus layout and its working environment. However, no real common approach to represent geometry data is available and such data can be found in various forms starting from custom semi-structured text files, source code (C/C++/FORTRAN), to XML and database solutions. The XML (Extensible Markup Language) has proven to provide an interesting approach for describing detector geometries, with several different but incompatible XML-based solutions existing. Therefore, interoperability and geometry data exchange among different frameworks is not possible at present. The author introduces a markup language for geometry descriptions. Its aim is to define a common approach for sharing and exchanging of geometry description data. Its requirements and design have been driven by experience and user feedback from existing projects which have their geometry description in XML

  19. 218-E-8 Borrow Pit Demolition Site closure plan. Revision 1

    International Nuclear Information System (INIS)

    Ruck, F.R.

    1994-01-01

    The 218-E-8 Demolition Site was the site of a single demolition event in November of 1984. This demolition event was a form of thermal treatment for discarded explosive chemical products. Because the 218-E-8 Demolition Site will no longer be used for this thermal activity, the site will be closed. Closure will be conducted pursuant to the requirements of the Washington State Department of Ecology (Ecology) ''Dangerous Waste Regulations,'' Washington Administrative Code (WAC) 173-303-610 and 40 Code of Federal Regulations (CFR) 270.1. The 218-E-8 Borrow Pit Demolition Site Closure Plan consists of a Hanford Facility Dangerous Waste Part A Permit Application, Form 3, Revision 4, and a closure plan. An explanation of the Part A Form 3, submitted with this closure plan is provided at the beginning of the Part A Section. The closure plan consists of nine chapters and five appendices. This closure plan presents a description of the 218-E-8 Demolition Site, the history of the waste treated, and the approach that will be followed to close the 218-E-8 Demolition Site. Because there were no radioactively contaminated chemicals involved in t he demolitions at the 218-E-8 Borrow Pit site, the information on radionuclides is provided for ''information only.'' Remediation of any radioactive contamination is not within the scope of this closure plan. Only dangerous constituents derived from 218-E-8 Demolition Site operations will be addressed in this closure plan in accordance with WAC 173-303-610(2)(b)(i)

  20. 48 CFR 1910.004-73 - Offer evaluation and award, brand name or equal descriptions.

    Science.gov (United States)

    2010-10-01

    ..., brand name or equal descriptions. 1910.004-73 Section 1910.004-73 Federal Acquisition Regulations System... 1910.004-73 Offer evaluation and award, brand name or equal descriptions. An offer may not be rejected for failure of the offered product to equal a characteristic of a brand name product if it was not...