WorldWideScience

Sample records for product description location

  1. A multi-subject evaluation of uncertainty in anatomical landmark location on shoulder kinematic description.

    Science.gov (United States)

    Langenderfer, Joseph E; Rullkoetter, Paul J; Mell, Amy G; Laz, Peter J

    2009-04-01

    An accurate assessment of shoulder kinematics is useful for understanding healthy normal and pathological mechanics. Small variability in identifying and locating anatomical landmarks (ALs) has potential to affect reported shoulder kinematics. The objectives of this study were to quantify the effect of landmark location variability on scapular and humeral kinematic descriptions for multiple subjects using probabilistic analysis methods, and to evaluate the consistency in results across multiple subjects. Data from 11 healthy subjects performing humeral elevation in the scapular plane were used to calculate Euler angles describing humeral and scapular kinematics. Probabilistic analyses were performed for each subject to simulate uncertainty in the locations of 13 upper-extremity ALs. For standard deviations of 4 mm in landmark location, the analysis predicted Euler angle envelopes between the 1 and 99 percentile bounds of up to 16.6 degrees . While absolute kinematics varied with the subject, the average 1-99% kinematic ranges for the motion were consistent across subjects and sensitivity factors showed no statistically significant differences between subjects. The description of humeral kinematics was most sensitive to the location of landmarks on the thorax, while landmarks on the scapula had the greatest effect on the description of scapular elevation. The findings of this study can provide a better understanding of kinematic variability, which can aid in making accurate clinical diagnoses and refining kinematic measurement techniques.

  2. Quantitative descriptive analysis and principal component analysis for sensory characterization of Indian milk product cham-cham.

    Science.gov (United States)

    Puri, Ritika; Khamrui, Kaushik; Khetra, Yogesh; Malhotra, Ravinder; Devraja, H C

    2016-02-01

    Promising development and expansion in the market of cham-cham, a traditional Indian dairy product is expected in the coming future with the organized production of this milk product by some large dairies. The objective of this study was to document the extent of variation in sensory properties of market samples of cham-cham collected from four different locations known for their excellence in cham-cham production and to find out the attributes that govern much of variation in sensory scores of this product using quantitative descriptive analysis (QDA) and principal component analysis (PCA). QDA revealed significant (p sensory attributes of cham-cham among the market samples. PCA identified four significant principal components that accounted for 72.4 % of the variation in the sensory data. Factor scores of each of the four principal components which primarily correspond to sweetness/shape/dryness of interior, surface appearance/surface dryness, rancid and firmness attributes specify the location of each market sample along each of the axes in 3-D graphs. These findings demonstrate the utility of quantitative descriptive analysis for identifying and measuring attributes of cham-cham that contribute most to its sensory acceptability.

  3. Location and description of transects for ecological studies in floodplain forests of the lower Suwannee River, Florida

    Science.gov (United States)

    Lewis, L.J.; Light, H.M.; Darst, M.R.

    2001-01-01

    Twelve transects were established in floodplain forests along the lower Suwannee River, Florida, as the principal data collection sites for a comprehensive study conducted by the U.S. Geological Survey and the Suwannee River Water Management District from 1996 to 2001. Data collected along the 12 transects included hydrologic conditions, land-surface elevations, soils, and vegetation of floodplain forests in relation to river flow. Transect locations are marked in the field with permanent markers at approximately 30 meter intervals. Detailed descriptions of the 12 transects and their locations are provided so that they can be used for future ecological studies. Descriptions of the transects include contact information necessary for access to the property on which the transects are located, maps showing transect locations and routes from the nearest city or major road, small scale maps of each transect showing marker locations, latitude and longitude of each marker, compass bearings of each transect line and graphs showing land-surface elevations of the transect with marker locations.

  4. 40 CFR 407.20 - Applicability; description of the apple products subcategory.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 28 2010-07-01 2010-07-01 true Applicability; description of the apple... SOURCE CATEGORY Apple Products Subcategory § 407.20 Applicability; description of the apple products... apples into apple products. The processing of apples into caustic peeled or dehydrated products is...

  5. Knowledge Production, Urban Locations and the Importance of Local Networks

    DEFF Research Database (Denmark)

    Skytt-Larsen, Christine Benna; Winther, Lars

    2015-01-01

    This paper analyses the relationship between knowledge production and urban locations in industrial design, a knowledge-intensive business service (KIBS). KIBS concentrate in urban locations. This is often explained by the co-location of client firms and market access in large cities. Recent...... research on knowledge production, however, reveals that knowledge productive networks are significant for both the competitiveness and location of KIBS. Thus, to understand the urban location of industrial design, it is important to analyse how knowledge production is organized within the industry....... Industrial design is concentrated in urban locations, but most of its clients are located elsewhere. Hence, it seems that industrial design firms concentrate in urban locations mainly because their knowledge networks include specific types of formal and informal local social networks....

  6. Description, Modelling and Design of Production Systems

    DEFF Research Database (Denmark)

    Jacobsen, Peter; Rudolph, Carsten

    1997-01-01

    Design of production systems are rarely an activity in which decision makers in most production companies have much experience. In future, this activity is to be more recurrent due to more and more frequent changes in the production task. Consequently, the decision makers are in need of better...... management tools and methods for description and modelling of production systems supporting the decisions. In this article a structural framework to describe and model production systems will be introduced, and it is shown how the production system of a minor Danish manufacturer of electromechanical...

  7. 40 CFR 415.270 - Applicability; description of the borax production subcategory.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 28 2010-07-01 2010-07-01 true Applicability; description of the borax... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS INORGANIC CHEMICALS MANUFACTURING POINT SOURCE CATEGORY Borax Production Subcategory § 415.270 Applicability; description of the borax production subcategory. The...

  8. Production Logistics Simulation Supported by Process Description Languages

    Directory of Open Access Journals (Sweden)

    Bohács Gábor

    2016-03-01

    Full Text Available The process description languages are used in the business may be useful in the optimization of logistics processes too. The process description languages would be the obvious solution for process control, to handle the main sources of faults and to give a correct list of what to do during the logistics process. Related to this, firstly, the paper presents the main features of the frequent process description languages. The following section describes the currently most used process modelling languages, in the areas of production and construction logistics. In addition, the paper gives some examples of logistics simulation, as another very important field of logistics system modelling. The main edification of the paper, the logistics simulation supported by process description languages. The paper gives a comparison of a Petri net formal representation and a Simul8 model, through a construction logistics model, as the major contribution of the research.

  9. 40 CFR 415.330 - Applicability; description of the carbon monoxide and by-product hydrogen production subcategory.

    Science.gov (United States)

    2010-07-01

    ... carbon monoxide and by-product hydrogen production subcategory. 415.330 Section 415.330 Protection of... MANUFACTURING POINT SOURCE CATEGORY Carbon Monoxide and By-Product Hydrogen Production Subcategory § 415.330 Applicability; description of the carbon monoxide and by-product hydrogen production subcategory. The provisions...

  10. Spatial competition for biogas production using insights from retail location models

    DEFF Research Database (Denmark)

    Bojesen, Mikkel; Birkin, M.; Clarke, G.

    2014-01-01

    production sector. Through a two-step approach by combining a location-allocation model with a production constrained spatial interaction model, this paper addresses the dual problem of determining optimal location and production capacity. What-if scenarios, in combination with the strategic economic...

  11. Perspectives on Spatial Decision Support Concerning Location of Biogas Production

    DEFF Research Database (Denmark)

    Bojesen, Mikkel

    in biogas production. This ambition requires that more than 20 new large scale centralised biogas plants are built. The location of these plants is associated with a number of externalities and uncertainties and the existing biogas sector struggles to establish itself as a viable energy producing sector....... Meanwhile planners and decision makers struggle to find sustainable locations that comprehensively balance the multiple concerns the location of biogas facilities includes. This PhD project examines how spatial decision support models can be used to ensure sustainable locations of future biogas plants......, understand the industrial economic aspects of such a role. Through the use of spatial multi-criteria evaluation models stakeholder preferences to decision criteria are included in a sustainable biogas facility location analysis. By the use of these models it is demonstrated how overall biogas production...

  12. The Dante pulse sequence description by product operators formalism

    International Nuclear Information System (INIS)

    Velloso, Marcia Helena Rodrigues; Villar, Daniel Figueroa

    1999-01-01

    The objective of this work is to supply a didactic example of the application of the product operators formalism for the description of the DANTE (delays alternating with mutation for tailored excitation) pulse sequence

  13. Talking about Relations : Factors Influencing the Production of Relational Descriptions

    NARCIS (Netherlands)

    Baltaretu, Adriana-Alexandra; Krahmer, Emiel; van Wijk, Carel; Maes, Alfons

    2016-01-01

    In a production experiment (Experiment 1) and an acceptability rating one (Experiment 2), we assessed two factors, spatial position and salience, which may influence the production of relational descriptions (such as “the ball between the man and the drawer”). In Experiment 1, speakers were asked to

  14. 40 CFR 415.50 - Applicability; description of the calcium oxide production subcategory.

    Science.gov (United States)

    2010-07-01

    ... calcium oxide production subcategory. 415.50 Section 415.50 Protection of Environment ENVIRONMENTAL... SOURCE CATEGORY Calcium Oxide Production Subcategory § 415.50 Applicability; description of the calcium... the production of calcium oxide. ...

  15. Talking about relations: Factors influencing the production of relational descriptions

    Directory of Open Access Journals (Sweden)

    Adriana eBaltaretu

    2016-02-01

    Full Text Available In a production experiment (Experiment 1 and an acceptability rating one (Experiment 2, we assessed two factors, spatial position and salience, which may influence the production of relational descriptions (such as the ball between the man and the drawer. In Experiment 1, speakers were asked to refer unambiguously to a target object (a ball. In Experiment 1a, we addressed the role of spatial position, more specifically if speakers mention the entity positioned leftmost in the scene as (first relatum. The results showed a preference to start with the left entity, however, only as a trend, which leaves room for other factors that could influence spatial reference. Thus, in the following studies, we varied salience systematically, by making one of the relatum candidates animate (Experiment 1b, and by adding attention capture cues, first subliminally by priming one relatum candidate with a flash (Experiment 1c, then explicitly by using salient colors for objects (Experiment 1d. Results indicate that spatial position played a dominant role. Entities on the left were mentioned more often as (first relatum than those on the right (Experiment 1a, 1b, 1c, 1d. Animacy affected reference production in one out of three studies (in Experiment 1d. When salience was manipulated by priming visual attention or by using salient colors, there were no significant effects (Experiment 1c, 1d. In the acceptability rating study (Experiment 2, participants expressed their preference for specific relata, by ranking descriptions on the basis of how good they thought the descriptions fitted the scene. Results show that participants preferred most the description that had an animate entity as the first mentioned relatum. The relevance of these results for models of reference production is discussed.

  16. 40 CFR 415.110 - Applicability; description of the potassium metal production subcategory.

    Science.gov (United States)

    2010-07-01

    ... potassium metal production subcategory. 415.110 Section 415.110 Protection of Environment ENVIRONMENTAL... SOURCE CATEGORY Potassium Metal Production Subcategory § 415.110 Applicability; description of the potassium metal production subcategory. The provisions of this subpart are applicable to discharges...

  17. 40 CFR 415.420 - Applicability; description of the hydrogen cyanide production subcategory.

    Science.gov (United States)

    2010-07-01

    ... hydrogen cyanide production subcategory. 415.420 Section 415.420 Protection of Environment ENVIRONMENTAL... SOURCE CATEGORY Hydrogen Cyanide Production Subcategory § 415.420 Applicability; description of the hydrogen cyanide production subcategory. This subpart applies to discharges to waters of the United States...

  18. 40 CFR 407.40 - Applicability; description of the frozen potato products subcategory.

    Science.gov (United States)

    2010-07-01

    ... frozen potato products subcategory. 407.40 Section 407.40 Protection of Environment ENVIRONMENTAL... PROCESSING POINT SOURCE CATEGORY Frozen Potato Products Subcategory § 407.40 Applicability; description of the frozen potato products subcategory. The provisions of this subpart are applicable to discharges...

  19. 40 CFR 407.50 - Applicability; description of the dehydrated potato products subcategory.

    Science.gov (United States)

    2010-07-01

    ... dehydrated potato products subcategory. 407.50 Section 407.50 Protection of Environment ENVIRONMENTAL... PROCESSING POINT SOURCE CATEGORY Dehydrated Potato Products Subcategory § 407.50 Applicability; description of the dehydrated potato products subcategory. The provisions of this subpart are applicable to...

  20. 40 CFR 415.220 - Applicability; description of the titanium dioxide production subcategory.

    Science.gov (United States)

    2010-07-01

    ... titanium dioxide production subcategory. 415.220 Section 415.220 Protection of Environment ENVIRONMENTAL... SOURCE CATEGORY Titanium Dioxide Production Subcategory § 415.220 Applicability; description of the titanium dioxide production subcategory. This subpart applies to discharges to waters of the United States...

  1. 40 CFR 415.340 - Applicability; description of the chrome pigments production subcategory.

    Science.gov (United States)

    2010-07-01

    ... chrome pigments production subcategory. 415.340 Section 415.340 Protection of Environment ENVIRONMENTAL... SOURCE CATEGORY Chrome Pigments Production Subcategory § 415.340 Applicability; description of the chrome pigments production subcategory. This subpart applies to discharges to waters of the United States and...

  2. 41 CFR 101-29.102 - Use of metric system of measurement in Federal product descriptions.

    Science.gov (United States)

    2010-07-01

    ... PROCUREMENT 29-FEDERAL PRODUCT DESCRIPTIONS 29.1-General § 101-29.102 Use of metric system of measurement in... measurement in Federal product descriptions. 101-29.102 Section 101-29.102 Public Contracts and Property... Federal agencies to: (a) Maintain close liaison with other Federal agencies, State and local governments...

  3. 40 CFR 415.490 - Applicability; description of the oxygen and nitrogen production subcategory.

    Science.gov (United States)

    2010-07-01

    ... oxygen and nitrogen production subcategory. 415.490 Section 415.490 Protection of Environment... POINT SOURCE CATEGORY Oxygen and Nitrogen Production Subcategory § 415.490 Applicability; description of the oxygen and nitrogen production subcategory. The provisions of this subpart are applicable to...

  4. Architecture Descriptions. A Contribution to Modeling of Production System Architecture

    DEFF Research Database (Denmark)

    Jepsen, Allan Dam; Hvam, Lars

    a proper understanding of the architecture phenomenon and the ability to describe it in a manner that allow the architecture to be communicated to and handled by stakeholders throughout the company. Despite the existence of several design philosophies in production system design such as Lean, that focus...... a diverse set of stakeholder domains and tools in the production system life cycle. To support such activities, a contribution is made to the identification and referencing of production system elements within architecture descriptions as part of the reference architecture framework. The contribution...

  5. Production design and location in the Danish television drama series Arvingerne

    DEFF Research Database (Denmark)

    Ion Wille, Jakob; Waade, Anne Marit

    2016-01-01

    Television fiction is most often referred to as the writer’s medium, whereas feature film is generally perceived as the vision and work of the director. In this article we turn our focus to the role and function of the production design and locations in developing and conceptualising a television...... drama series. We use the drama series Arvingerne (The Legacy, DR, 2014-2015) to illustrate how design ideas can be developed at an early stage, in pre-pre-production, as part of a collective, creative process that includes the scriptwriter, the production designer and the producer. Our empirical study...... of the series draws on an analysis of in-house design/concept documents [1], interviews with the production designer Mia Stensgaard [2], and promotional material made for the series [3]. The paper also draws on visual analysis of the finished production. Our overall argument is that the importance of location...

  6. The “Weight” of Product Claims and Vertical Location

    DEFF Research Database (Denmark)

    Festila, Alexandra; Chrysochou, Polymeros

    The present research shows that claims denoting healthy attributes will elicit more favorable consumer evaluations (towards ads, packages and products) when placed at higher locations, whereas claim denoting “unhealthy” attributes (e.g., taste) will elicit more favorable evaluations when placed a...

  7. 40 CFR 415.640 - Applicability; description of the cadmium pigments and salts production subcategory.

    Science.gov (United States)

    2010-07-01

    ... cadmium pigments and salts production subcategory. 415.640 Section 415.640 Protection of Environment... POINT SOURCE CATEGORY Cadmium Pigments and Salts Production Subcategory § 415.640 Applicability; description of the cadmium pigments and salts production subcategory. The provisions of this subpart are...

  8. Perception and description of premium beers by panels with different degrees of product expertise

    DEFF Research Database (Denmark)

    Giacalone, Davide; Ribeiro, Leticia Machado; Frøst, Michael Bom

    2016-01-01

    The present study compares subjects with varying degrees of product expertise with regards to their ability to provide a sensory profile of beverages. Eight premium beers were evaluated by three different panels using a Napping® test, followed by a descriptive task. Two panels were constituted of...... were all above 0.90, indicating high configurational similarity. In contrast, PLS-DA showed significant differences in the use of attributes, particularly between Experts and Novices, suggesting that product expertise is more associated with descriptive, rather than perceptual, ability....

  9. Semantic Location Extraction from Crowdsourced Data

    Science.gov (United States)

    Koswatte, S.; Mcdougall, K.; Liu, X.

    2016-06-01

    Crowdsourced Data (CSD) has recently received increased attention in many application areas including disaster management. Convenience of production and use, data currency and abundancy are some of the key reasons for attracting this high interest. Conversely, quality issues like incompleteness, credibility and relevancy prevent the direct use of such data in important applications like disaster management. Moreover, location information availability of CSD is problematic as it remains very low in many crowd sourced platforms such as Twitter. Also, this recorded location is mostly related to the mobile device or user location and often does not represent the event location. In CSD, event location is discussed descriptively in the comments in addition to the recorded location (which is generated by means of mobile device's GPS or mobile communication network). This study attempts to semantically extract the CSD location information with the help of an ontological Gazetteer and other available resources. 2011 Queensland flood tweets and Ushahidi Crowd Map data were semantically analysed to extract the location information with the support of Queensland Gazetteer which is converted to an ontological gazetteer and a global gazetteer. Some preliminary results show that the use of ontologies and semantics can improve the accuracy of place name identification of CSD and the process of location information extraction.

  10. SEMANTIC LOCATION EXTRACTION FROM CROWDSOURCED DATA

    Directory of Open Access Journals (Sweden)

    S. Koswatte

    2016-06-01

    Full Text Available Crowdsourced Data (CSD has recently received increased attention in many application areas including disaster management. Convenience of production and use, data currency and abundancy are some of the key reasons for attracting this high interest. Conversely, quality issues like incompleteness, credibility and relevancy prevent the direct use of such data in important applications like disaster management. Moreover, location information availability of CSD is problematic as it remains very low in many crowd sourced platforms such as Twitter. Also, this recorded location is mostly related to the mobile device or user location and often does not represent the event location. In CSD, event location is discussed descriptively in the comments in addition to the recorded location (which is generated by means of mobile device's GPS or mobile communication network. This study attempts to semantically extract the CSD location information with the help of an ontological Gazetteer and other available resources. 2011 Queensland flood tweets and Ushahidi Crowd Map data were semantically analysed to extract the location information with the support of Queensland Gazetteer which is converted to an ontological gazetteer and a global gazetteer. Some preliminary results show that the use of ontologies and semantics can improve the accuracy of place name identification of CSD and the process of location information extraction.

  11. Method for Developing Descriptions of Hard-to-Price Products: Results of the Telecommunications Product Study

    Energy Technology Data Exchange (ETDEWEB)

    Conrad, F.; Tonn, B.

    1999-05-01

    This report presents the results of a study to test a new method for developing descriptions of hard-to-price products. The Bureau of Labor Statistics (BLS) is responsible for collecting data to estimate price indices such as the Consumers Price Index (BLS) is responsible for collecting data to estimate price indices such as the Consumers Price Index (CPI). BLS accomplishes this task by sending field staff to places of business to price actual products. The field staff are given product checklists to help them determine whether products found today are comparable to products priced the previous month. Prices for non-comparable products are not included in the current month's price index calculations. A serious problem facing BLS is developing product checklists for dynamic product areas, new industries, and the service sector. It is difficult to keep checklists up-to-date and quite often simply to develop checklists for service industry products. Some people estimates that upwards of 50 % of US economic activity is not accounted for in the CPI

  12. Microscopic description of production cross sections including deexcitation effects

    Science.gov (United States)

    Sekizawa, Kazuyuki

    2017-07-01

    Background: At the forefront of the nuclear science, production of new neutron-rich isotopes is continuously pursued at accelerator laboratories all over the world. To explore the currently unknown territories in the nuclear chart far away from the stability, reliable theoretical predictions are inevitable. Purpose: To provide a reliable prediction of production cross sections taking into account secondary deexcitation processes, both particle evaporation and fission, a new method called TDHF+GEMINI is proposed, which combines the microscopic time-dependent Hartree-Fock (TDHF) theory with a sophisticated statistical compound-nucleus deexcitation model, GEMINI++. Methods: Low-energy heavy ion reactions are described based on three-dimensional Skyrme-TDHF calculations. Using the particle-number projection method, production probabilities, total angular momenta, and excitation energies of primary reaction products are extracted from the TDHF wave function after collision. Production cross sections for secondary reaction products are evaluated employing GEMINI++. Results are compared with available experimental data and widely used grazing calculations. Results: The method is applied to describe cross sections for multinucleon transfer processes in 40Ca+124Sn (Ec .m .≃128.54 MeV ), 48Ca+124Sn (Ec .m .≃125.44 MeV ), 40Ca+208Pb (Ec .m .≃208.84 MeV ), 58Ni+208Pb (Ec .m .≃256.79 MeV ), 64Ni+238U (Ec .m .≃307.35 MeV ), and 136Xe+198Pt (Ec .m .≃644.98 MeV ) reactions at energies close to the Coulomb barrier. It is shown that the inclusion of secondary deexcitation processes, which are dominated by neutron evaporation in the present systems, substantially improves agreement with the experimental data. The magnitude of the evaporation effects is very similar to the one observed in grazing calculations. TDHF+GEMINI provides better description of the absolute value of the cross sections for channels involving transfer of more than one proton, compared to the grazing

  13. Developing an Emergency Physician Productivity Index Using Descriptive Health Analytics.

    Science.gov (United States)

    Khalifa, Mohamed

    2015-01-01

    Emergency department (ED) crowding became a major barrier to receiving timely emergency care. At King Faisal Specialist Hospital and Research Center, Saudi Arabia, we identified variables and factors affecting crowding and performance to develop indicators to help evaluation and improvement. Measuring efficiency of work and activity of throughput processes; it was important to develop an ED physician productivity index. Data on all ED patients' encounters over the last six months of 2014 were retrieved and descriptive health analytics methods were used. Three variables were identified for their influence on productivity and performance; Number of Treated Patients per Physician, Patient Acuity Level and Treatment Time. The study suggested a formula to calculate the productivity index of each physician through dividing the Number of Treated Patients by Patient Acuity Level squared and Treatment Time to identify physicians with low productivity index and investigate causes and factors.

  14. Regulatory fit effects for injunctive versus descriptive social norms: Evidence from the promotion of sustainable products

    NARCIS (Netherlands)

    Melnyk, V.; Herpen, van E.; Fischer, A.R.H.; Trijp, van J.C.M.

    2013-01-01

    Consumers face marketing messages using social norms in many situations where different goals are dominant. This research examines moderating effects of regulatory focus for descriptive and injunctive norms in the promotion of sustainable products. More specifically, it shows that descriptive norms

  15. 40 CFR 415.140 - Applicability; description of the sodium bicarbonate production subcategory.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 28 2010-07-01 2010-07-01 true Applicability; description of the sodium bicarbonate production subcategory. 415.140 Section 415.140 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS INORGANIC CHEMICALS MANUFACTURING POINT SOURCE CATEGORY Sodium Bicarbonate...

  16. Central location test vs. home use test: Contrasting results depending on product type

    NARCIS (Netherlands)

    Boutrolle, I.; Delarue, J.; Arranz, D.; Rogeaux, M.; Köster, E.P.

    2007-01-01

    Marketing professionals and sensory scientists have several hedonic testing methods at their disposal to assess product acceptability. The central location test (CLT) which usually takes place in a standardised location under controlled conditions is more frequently used than the home use test

  17. WRAP Module 1 data management system (DMS) software design description (SDD)

    International Nuclear Information System (INIS)

    Weidert, J.R.

    1996-01-01

    Revision 2 of the Waste Receiving and Processing (WRAP) Module 1 Data Management System (DMS) Preliminary Software Design Description (PSDD) provides a high-level design description of the system. The WRAP 1 DMS is required to collect, store, and report data related to certification, tracking, packaging, repackaging, processing, and shipment of waste processed or stored at the WRAP 1 facility. The WRAP 1 DMS SDD is used as the primary medium for communication software design information. This release provides design descriptions for the following process modules produced under Phase 1 of the development effort: Receiving Drum or Box Containers Process Routing and Picklists; Waste Inventory by Location and/or Container Relationships; LLW Process Glovebox Facility Radiologic Material Inventory Check (partial); Shipping (partial production); Drum or Box NDE Operations; and Drum or Box NDA Operations Data Review (partial production). In addition, design descriptions are included for the following process modules scheduled for development under Phases 2 and 3: Activity Comment; LLW RWM Glovebox Sample Management; TRU Process Glovebox; TRU RWM Glovebox; and TRUPACT Processing. Detailed design descriptions for Reports and Facility Metrics have also been provided for in Revision 2 of this document

  18. 40 CFR 415.60 - Applicability; description of the chlorine and sodium or potassium hydroxide production subcategory.

    Science.gov (United States)

    2010-07-01

    ... chlorine and sodium or potassium hydroxide production subcategory. 415.60 Section 415.60 Protection of... MANUFACTURING POINT SOURCE CATEGORY Chlor-alkali Subcategory (Chlorine and Sodium or Potassium Hydroxide Production) § 415.60 Applicability; description of the chlorine and sodium or potassium hydroxide production...

  19. Impacts of facility size and location decisions on ethanol production cost

    International Nuclear Information System (INIS)

    Kocoloski, Matt; Michael Griffin, W.; Scott Matthews, H.

    2011-01-01

    Cellulosic ethanol has been identified as a promising alternative to fossil fuels to provide energy for the transportation sector. One of the obstacles cellulosic ethanol must overcome in order to contribute to transportation energy demand is the infrastructure required to produce and distribute the fuel. Given a nascent cellulosic ethanol industry, locating cellulosic ethanol refineries and creating the accompanying infrastructure is essentially a greenfield problem that may benefit greatly from quantitative analysis. This study models cellulosic ethanol infrastructure investment using a mixed integer program (MIP) that locates ethanol refineries and connects these refineries to the biomass supplies and ethanol demands in a way that minimizes the total cost. For the single- and multi-state regions examined in this study, larger facilities can decrease ethanol costs by $0.20-0.30 per gallon, and placing these facilities in locations that minimize feedstock and product transportation costs can decrease ethanol costs by up to $0.25 per gallon compared to uninformed placement that could result from influences such as local subsidies to encourage economic development. To best benefit society, policies should allow for incentives that encourage these low-cost production scenarios and avoid politically motivated siting of plants. - Research highlights: → Mixed-integer programming can be used to model ethanol infrastructure investment. → Large cellulosic ethanol facilities can decrease production cost by $0.20/gallon. → Optimized facility placement can save $0.25/gallon.

  20. Selection of a plant location - A case study: Urea production using ...

    African Journals Online (AJOL)

    Selection of a plant location - A case study: Urea production using Calub Gas. ... The criteria are. amongst others, supply of raw materials and fuel, market proximity, water supply. waste ... To set up · critical factors for Ethiopian scenario

  1. Environmental site description for a Uranium Atomic Vapor Laser Isotope Separation (U-AVLIS) production plant at the Paducah Gaseous Diffusion Plant site

    International Nuclear Information System (INIS)

    Marmer, G.J.; Dunn, C.P.; Moeller, K.L.; Pfingston, J.M.; Policastro, A.J.; Yuen, C.R.; Cleland, J.H.

    1991-09-01

    Uranium enrichment in the United States has utilized a diffusion process to preferentially enrich the U-235 isotope in the uranium product. The U-AVLIS process is based on electrostatic extraction of photoionized U-235 atoms from an atomic vapor stream created by electron-beam vaporization of uranium metal alloy. The U-235 atoms are ionized when precisely tuned laser light -- of appropriate power, spectral, and temporal characteristics -- illuminates the uranium vapor and selectively photoionizes the U-235 isotope. A programmatic document for use in screening DOE site to locate a U-AVLIS production plant was developed and implemented in two parts. The first part consisted of a series of screening analyses, based on exclusionary and other criteria, that identified a reasonable number of candidate sites. These sites were subjected to a more rigorous and detailed comparative analysis for the purpose of developing a short list of reasonable alternative sites for later environmental examination. This environmental site description (ESD) provides a detailed description of the PGDP site and vicinity suitable for use in an environmental impact statement (EIS). The report is based on existing literature, data collected at the site, and information collected by Argonne National Laboratory (ANL) staff during a site visit. 65 refs., 15 tabs

  2. Environmental site description for a Uranium Atomic Vapor Laser Isotope Separation (U-AVLIS) production plant at the Paducah Gaseous Diffusion Plant site

    Energy Technology Data Exchange (ETDEWEB)

    Marmer, G.J.; Dunn, C.P.; Moeller, K.L.; Pfingston, J.M.; Policastro, A.J.; Yuen, C.R.; Cleland, J.H. (ed.)

    1991-09-01

    Uranium enrichment in the United States has utilized a diffusion process to preferentially enrich the U-235 isotope in the uranium product. The U-AVLIS process is based on electrostatic extraction of photoionized U-235 atoms from an atomic vapor stream created by electron-beam vaporization of uranium metal alloy. The U-235 atoms are ionized when precisely tuned laser light -- of appropriate power, spectral, and temporal characteristics -- illuminates the uranium vapor and selectively photoionizes the U-235 isotope. A programmatic document for use in screening DOE site to locate a U-AVLIS production plant was developed and implemented in two parts. The first part consisted of a series of screening analyses, based on exclusionary and other criteria, that identified a reasonable number of candidate sites. These sites were subjected to a more rigorous and detailed comparative analysis for the purpose of developing a short list of reasonable alternative sites for later environmental examination. This environmental site description (ESD) provides a detailed description of the PGDP site and vicinity suitable for use in an environmental impact statement (EIS). The report is based on existing literature, data collected at the site, and information collected by Argonne National Laboratory (ANL) staff during a site visit. 65 refs., 15 tabs.

  3. Impact of production location, production system, and variety on the volatile organic compounds fingerprints and sensory characteristics of tomatoes

    NARCIS (Netherlands)

    Muilwijk, Mirthe; Heenan, Samuel; Koot, Alex; Ruth, Van Saskia M.

    2015-01-01

    Consumers have more and more interest in where and how their foods are produced. However, it is often challenging to discriminate products from different production locations and systems. The objective of this study was to examine fingerprinting of volatile organic compounds (VOCs) as an approach

  4. Description of the production process - industrial phase; Descricao do processo produtivo - fase industrial

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2009-10-15

    This chapter presents the description of the present state-of-art, in this paper called first generation of the productive process of sugar-cane bio ethanol in Brazil, related to the industrial phase involving their improvements and also the aspects related to the second generation technologies, particularly the hydrolysis and gasification of the biomass technologies. The chapter also approaches the aspects referred to the use of sugar cane bagasse and the straw cape, and also the production of electric power surplus.

  5. 18 CFR 292.208 - Special requirements for hydroelectric small power production facilities located at a new dam or...

    Science.gov (United States)

    2010-04-01

    ... for hydroelectric small power production facilities located at a new dam or diversion. 292.208 Section... requirements for hydroelectric small power production facilities located at a new dam or diversion. (a) A hydroelectric small power production facility that impounds or diverts the water of a natural watercourse by...

  6. 18 CFR 292.209 - Exceptions from requirements for hydroelectric small power production facilities located at a new...

    Science.gov (United States)

    2010-04-01

    ... requirements for hydroelectric small power production facilities located at a new dam or diversion. 292.209... Exceptions from requirements for hydroelectric small power production facilities located at a new dam or... the Federal Power Act, at which non-Federal hydroelectric development is permissible; or (2) An...

  7. Seasonality in birth defects, agricultural production and urban location.

    Science.gov (United States)

    McKinnish, Terra; Rees, Daniel I; Langlois, Peter H

    2014-12-01

    This paper tests whether the strength of the "spring spike" in birth defects is related to agricultural production and urban location using Texas Birth Defects Registry data for the period 1996-2007. We find evidence of a spike in birth defects among children conceived in the spring and summer, but it is more pronounced in urban non-agricultural counties than in other types of counties. Furthermore, the spike lasts longer in urban non-agricultural counties as compared to other types of counties. Copyright © 2014 Elsevier B.V. All rights reserved.

  8. Route-external and route-internal landmarks in route descriptions : Effects of route length and map design

    NARCIS (Netherlands)

    Westerbeek, Hans; Maes, Alfons

    2013-01-01

    Landmarks are basic ingredients in route descriptions. They often mark choice points: locations where travellers choose from different options how to continue the route. This study focuses on one of the loose ends in the taxonomy of landmarks. In a memory-based production experiment in which

  9. Allegheny County Dam Locations

    Data.gov (United States)

    Allegheny County / City of Pittsburgh / Western PA Regional Data Center — This dataset shows the point locations of dams in Allegheny County. If viewing this description on the Western Pennsylvania Regional Data Center’s open data portal...

  10. Description of the production process - agricultural phase; Descricao do processo produtivo - fase agricola

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2009-10-15

    This chapter presents the description of the state-of-art of the production process of sugar cane bio ethanol in Brazil also denominated of first generation, involving the improvements in the agricultural phase and also the aspects related to the second generation technologies. The different aspects related do the use of sugar cane bagasse and straw cape.

  11. Descriptive statistics.

    Science.gov (United States)

    Nick, Todd G

    2007-01-01

    Statistics is defined by the Medical Subject Headings (MeSH) thesaurus as the science and art of collecting, summarizing, and analyzing data that are subject to random variation. The two broad categories of summarizing and analyzing data are referred to as descriptive and inferential statistics. This chapter considers the science and art of summarizing data where descriptive statistics and graphics are used to display data. In this chapter, we discuss the fundamentals of descriptive statistics, including describing qualitative and quantitative variables. For describing quantitative variables, measures of location and spread, for example the standard deviation, are presented along with graphical presentations. We also discuss distributions of statistics, for example the variance, as well as the use of transformations. The concepts in this chapter are useful for uncovering patterns within the data and for effectively presenting the results of a project.

  12. Numerical Models for Exact Description of in-situ Digital In-Line Holography Experiments with Irregularly-Shaped Arbitrarily-Located Particles

    Directory of Open Access Journals (Sweden)

    Marc Brunel

    2015-04-01

    Full Text Available We present the development of a numerical simulator for digital in-line holography applications. In-line holograms of arbitrarily shaped and arbitrarily located objects are calculated using generalized Huygens-Fresnel integrals. The objects are 2D opaque or phase objects. The optical set-up is described by its optical transfer matrix. A wide variety of optical systems, involving windows, spherical or cylindrical lenses, can thus be taken into account. It makes the simulator applicable for design and description of in situ experiments. We discuss future applications of this simulator for detection of nanoparticles in droplets, or calibration of airborne instruments that detect and measure ice crystals in the atmosphere.

  13. General description and production lines of the Egyptian fuel manufacturing pilot plant

    International Nuclear Information System (INIS)

    Zidan, W.I.; Elseaidy, I.M.

    1999-01-01

    The Egyptian Fuel Manufacturing Pilot Plant, FMPP, is a new facility, producing an MTR-type fuel elements required for the Egyptian Second Research Reactor, ETRR-2, as well as other plates or elements for an external clients with the same type and enrichment percent or lower, (LEU). General description is presented. The production lines in FMPP, which begin from uranium hexaflouride (UF 6 , 19.7±0.2 % U 235 by wt), aluminum powder, and nuclear grade 6061 aluminium alloy in sheets, bars, and rods with the different heat treatments and dimensions as a raw materials, are processed through a series of the manufacturing, inspection, and quality control plan to produce the final specified MTR-type fuel elements. All these processes and the product control in each step are presented. The specifications of the final product are presented. (author)

  14. Environmental site description for a Uranium Atomic Vapor Laser Isotope Separation (U-AVLIS) production plant at the Portsmouth Gaseous Diffusion Plant site

    International Nuclear Information System (INIS)

    Marmer, G.J.; Dunn, C.P.; Filley, T.H.; Moeller, K.L.; Pfingston, J.M.; Policastro, A.J.; Cleland, J.H.

    1991-09-01

    Uranium enrichment in the United States has utilized a diffusion process to preferentially enrich the U-235 isotope in the uranium product. In the 1970s, the US Department of Energy (DOE) began investigating more efficient and cost-effective enrichment technologies. In January 1990, the Secretary of Energy approved a plan for the demonstration and deployment of the Uranium Atomic Vapor Laser isotope Separation (U-AVLIS) technology with the near-term goal to provide the necessary information to make a deployment decision by November 1992. Initial facility operation is anticipated for 1999. A programmatic document for use in screening DOE sites to locate a U-AVLIS production plant was developed and implemented in two parts. The first part consisted of a series of screening analyses, based on exclusionary and other criteria, that identified a reasonable number of candidate sites. The final evaluation, which included sensitivity studies, identified the Oak Ridge Gaseous Diffusion Plant (ORGDP) site, the Paducah Gaseous Diffusion Plant (PGDP) site, and the Portsmouth Gaseous Diffusion Plant (PORTS) site as having significant advantages over the other sites considered. This environmental site description (ESD) provides a detailed description of the PORTS site and vicinity suitable for use in an environmental impact statement (EIS). This report is based on existing literature, data collected at the site, and information collected by Argonne National Laboratory (ANL) staff during site visits. The organization of the ESD is as follows. Topics addressed in Sec. 2 include a general site description and the disciplines of geology, water resources, biotic resources, air resources, noise, cultural resources, land use. Socioeconomics, and waste management. Identification of any additional data that would be required for an EIS is presented in Sec. 3

  15. Environmental site description for a Uranium Atomic Vapor Laser Isotope Separation (U-AVLIS) production plant at the Portsmouth Gaseous Diffusion Plant site

    Energy Technology Data Exchange (ETDEWEB)

    Marmer, G.J.; Dunn, C.P.; Filley, T.H.; Moeller, K.L.; Pfingston, J.M.; Policastro, A.J.; Cleland, J.H.

    1991-09-01

    Uranium enrichment in the United States has utilized a diffusion process to preferentially enrich the U-235 isotope in the uranium product. In the 1970s, the US Department of Energy (DOE) began investigating more efficient and cost-effective enrichment technologies. In January 1990, the Secretary of Energy approved a plan for the demonstration and deployment of the Uranium Atomic Vapor Laser isotope Separation (U-AVLIS) technology with the near-term goal to provide the necessary information to make a deployment decision by November 1992. Initial facility operation is anticipated for 1999. A programmatic document for use in screening DOE sites to locate a U-AVLIS production plant was developed and implemented in two parts. The first part consisted of a series of screening analyses, based on exclusionary and other criteria, that identified a reasonable number of candidate sites. The final evaluation, which included sensitivity studies, identified the Oak Ridge Gaseous Diffusion Plant (ORGDP) site, the Paducah Gaseous Diffusion Plant (PGDP) site, and the Portsmouth Gaseous Diffusion Plant (PORTS) site as having significant advantages over the other sites considered. This environmental site description (ESD) provides a detailed description of the PORTS site and vicinity suitable for use in an environmental impact statement (EIS). This report is based on existing literature, data collected at the site, and information collected by Argonne National Laboratory (ANL) staff during site visits. The organization of the ESD is as follows. Topics addressed in Sec. 2 include a general site description and the disciplines of geology, water resources, biotic resources, air resources, noise, cultural resources, land use. Socioeconomics, and waste management. Identification of any additional data that would be required for an EIS is presented in Sec. 3.

  16. Allegheny County WIC Vendor Locations

    Data.gov (United States)

    Allegheny County / City of Pittsburgh / Western PA Regional Data Center — This dataset contains the locations of Women, Infants, and Children (WIC) program vendors. If viewing this description on the Western Pennsylvania Regional Data...

  17. Book reviews: Miroslav N. Jovanovic – Evolutionary Economic Geography. Location of Production in the European Union

    Directory of Open Access Journals (Sweden)

    Raluca G. Popescu

    2011-12-01

    Full Text Available The book tries to answer the problem of locating production of a company in the geographic space analyzing what determines productivity differences between regions using the theory of evolutionary economic geography. Evolutionary economics studies “the origin, change, direction and speed in the spatial distribution and organization of as well as production and consumption in a certain period of time.” The studied problem is relevant in order to know not only what will be the future location of jobs, their quality and quantity but also where will take place the maximization of profits, the collection of taxes, the public spending, etc.

  18. Environmental characterization of two potential locations at Hanford for a new production reactor

    Energy Technology Data Exchange (ETDEWEB)

    Watson, E.C.; Becker, C.D.; Fitzner, R.E.; Gano, K.A.; Imhoff, K.L.; McCallum, R.F.; Myers, D.A.; Page, T.L.; Price, K.R.; Ramsdell, J.V.; Rice D.G.; Schreiber D.L.; Skumatz L.A.; Sommer D.J.; Tawil J.J.; Wallace R.W.; Watson D.G.

    1984-09-01

    This report describes various environmental aspects of two areas on the Hanford Site that are potential locations for a New Production Reactor (NPR). The area known as the Skagit Hanford Site is considered the primary or reference site. The second area, termed the Firehouse Site, is considered the alternate site. The report encompasses an environmental characterization of these two potential NPR locations. Eight subject areas are covered: geography and demography; ecology; meteorology; hydrology; geology; cultural resources assessment; economic and social effects of station construction and operation; and environmental monitoring. 80 refs., 68 figs., 109 tabs.

  19. A heuristic algorithm for a multi-product four-layer capacitated location-routing problem

    Directory of Open Access Journals (Sweden)

    Mohsen Hamidi

    2014-01-01

    Full Text Available The purpose of this study is to solve a complex multi-product four-layer capacitated location-routing problem (LRP in which two specific constraints are taken into account: 1 plants have limited production capacity, and 2 central depots have limited capacity for storing and transshipping products. The LRP represents a multi-product four-layer distribution network that consists of plants, central depots, regional depots, and customers. A heuristic algorithm is developed to solve the four-layer LRP. The heuristic uses GRASP (Greedy Randomized Adaptive Search Procedure and two probabilistic tabu search strategies of intensification and diversification to tackle the problem. Results show that the heuristic solves the problem effectively.

  20. Portrait Of Portugal’s Nut Iii Regions In Productive Location Clusters

    Directory of Open Access Journals (Sweden)

    Francisco José Lopes de souse Diniz

    2015-03-01

    Full Text Available The purpose of this article is to piece together a picture of Portuguese regions at the end of the first decade of the twenty-first century. In particular, the authors tried to group NUT III regions according to the location of productive activities bearing in mind employment and other economic and social indicators, namely productivity and purchasing power, as well as competitiveness and environmental quality indicators. Using clusters, it was possible to obtain a map of Portugal containing 6 cluster typologies. Clearly, at one end of these typologies are the regions where tertiary activities are predominant and where there is more purchasing power, productivity and competitiveness, causing, however, more damages to the environment, whereas at the other end are the rural less competitive regions with a lower purchasing power but environmentally more attractive. In between, there are other situations which are also looked into.

  1. [Rare location of arachnoid cysts. Extratemporal cysts].

    Science.gov (United States)

    Martinez-Perez, Rafael; Hinojosa, José; Pascual, Beatriz; Panaderos, Teresa; Welter, Diego; Muñoz, María J

    2016-01-01

    The therapeutic management of arachnoid cysts depends largely on its location. Almost 50% of arachnoid cysts are located in the temporal fossa-Sylvian fissure, whereas the other half is distributed in different locations, sometimes exceptional. Under the name of infrequent location arachnoid cysts, a description is presented of those composed of 2 sheets of arachnoid membrane, which are not located in the temporal fossa, and are primary or congenital. Copyright © 2015 Sociedad Española de Neurocirugía. Published by Elsevier España. All rights reserved.

  2. GLN standard as a facilitator of physical location identification within process of distribution

    Directory of Open Access Journals (Sweden)

    Davor Dujak

    2017-09-01

    Full Text Available Background: Distribution, from the business point of view, is a set of decisions and actions that will provide the right products at the right time and place, in line with customer expectations. It is a process that generates significant cost, but also effectively implemented, significantly affects the positive perception of the company. Institute of Logistics and Warehousing (IliM, based on the research results related to the optimization of the distribution network and consulting projects for companies, indicates the high importance of the correct description of the physical location within the supply chains in order to make transport processes more effective. Individual companies work on their own geocoding of warehouse locations and location of their business partners (suppliers, customers, but the lack of standardization in this area causes delays related to delivery problems with reaching the right destination. Furthermore, the cooperating companies do not have a precise indication of the operating conditions of each location, e.g. Time windows of the plant, logistic units accepted at parties, supported transport etc. Lack of this information generates additional costs associated with re-operation and the costs of lost benefits for the lack of goods on time. The solution to this problem seems to be a wide-scale implementation of GS1 standard which is the Global Location Number (GLN, that, thanks to a broad base of information will assist the distribution processes. Material and methods: The results of survey conducted among Polish companies in the second half of 2016 indicate an unsatisfactory degree of implementation of the transport processes, resulting from incorrect or inaccurate description of the location, and thus, a significant number of errors in deliveries. Accordingly, authors studied literature and examined case studies indicating the possibility of using GLN standard to identify the physical location and to show the

  3. Importance of location and exterior of city hotels as elements of guest satisfaction

    Directory of Open Access Journals (Sweden)

    Tepavčević Jelena

    2016-01-01

    Full Text Available Business practices and attitudes of tourists show that hospitality represents the primary factor in the development of urban tourism. It is considered that, besides the exclusive appearance, there is no business success for hotel properties without a proper location. It is known that a typical tourist would like to be close enough to tourist attractions, to be able to reach them on foot. This paper deals with the importance of location and exterior of urban hotels on guests decision on the selection and overall satisfaction with hotel products. The survey was conducted in the hotels two largest urban centers in Serbia (Belgrade and Novi Sad. The aim of the research is an insight into the real impact of location and exterior when assessing the guest satisfaction. Descriptive statistical analysis, t-test and regression analysis were used for statistical data processing.

  4. Water activities in Forsmark. Ecological field inventory and classification of biodiversity values and description of forest production land

    International Nuclear Information System (INIS)

    Hamren, Ulrika; Collinder, Per

    2010-12-01

    In 2009, the Swedish Nuclear Fuel and Waste Management Co (SKB) chose Forsmark in the Municipality of Oesthammar as site for the final repository for spent nuclear fuel. This report describes nature values and forestry areas in Forsmark, and provides part of the background material for description of consequences due to groundwater diversion during construction and operation of the repository. The report describes results of map studies and comprehensive field investigations, in terms of geographical delineations, descriptions of characteristics and classifications of nature values for groundwater dependent or groundwater favoured nature objects in Forsmark. The nature objects are located in an investigation area, which contains the area that according to numerical flow modelling could be affected by groundwater-table drawdown due to groundwater diversion

  5. Allegheny County Farmers Markets Locations (2017)

    Data.gov (United States)

    Allegheny County / City of Pittsburgh / Western PA Regional Data Center — This dataset shows the locations of farmers markets in Allegheny County. If viewing this description on the Western Pennsylvania Regional Data Center’s open data...

  6. Two-step rating-based 'double-faced applicability' test for sensory analysis of spread products as an alternative to descriptive analysis with trained panel.

    Science.gov (United States)

    Kim, In-Ah; den-Hollander, Elyn; Lee, Hye-Seong

    2018-03-01

    Descriptive analysis with a trained sensory panel has thus far been the most well defined methodology to characterize various products. However, in practical terms, intensive training in descriptive analysis has been recognized as a serious defect. To overcome this limitation, various novel rapid sensory profiling methodologies have been suggested in the literature. Among these, attribute-based methodologies such as check-all-that-apply (CATA) questions showed results comparable to those of conventional sensory descriptive analysis. Kim, Hopkinson, van Hout, and Lee (2017a, 2017b) have proposed a novel attribute-based methodology termed the two-step rating-based 'double-faced applicability' test with a novel output measure of applicability magnitude (d' A ) for measuring consumers' product usage experience throughout various product usage stages. In this paper, the potential of the two-step rating-based 'double-faced applicability' test with d' A was investigated as an alternative to conventional sensory descriptive analysis in terms of sensory characterization and product discrimination. Twelve commercial spread products were evaluated using both conventional sensory descriptive analysis with a trained sensory panel and two-step rating-based 'double-faced applicability' test with an untrained sensory panel. The results demonstrated that the 'double-faced applicability' test can be used to provide a direct measure of the applicability magnitude of sensory attributes of the samples tested in terms of d' A for sensory characterization of individual samples and multiple sample comparisons. This suggests that when the appropriate list of attributes to be used in the questionnaire is already available, the two-step rating-based 'double-faced applicability' test with d' A can be used as a more efficient alternative to conventional descriptive analysis, without requiring any intensive training process. Copyright © 2017 Elsevier Ltd. All rights reserved.

  7. Theory of inner product vector and its application to multi-location damage detection

    International Nuclear Information System (INIS)

    Wang Le; Yang Zhichun; Zhang Muyu; Waters, T P

    2011-01-01

    Structural damage detection methods using time domain vibration responses have shown appeal in recent years. In previous papers by the authors, the inner product vector (IPV) was proposed as a damage detection algorithm which uses cross correlation functions between vibration responses under white noise excitation or band pass white noise excitation. The proposed algorithm was verified by some simulative and experimental examples featuring a single damage location. However, damage at multiple locations was not considered. Therefore, this paper extends the application of IPV-based structural damage detection to the problem of multiple damage locations. Firstly, the theory of the IPV and its implementation in a damage detection context is reviewed. Then, two strategies for detecting multiple damages utilizing IPV are proposed. Finally, a damage detection experiment of a honeycomb sandwich composite beam is adopted to illustrate the feasibility and effectiveness of the IPV-based damage detection method.

  8. The vegetation of Yucca Mountain: Description and ecology

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-29

    Vegetation at Yucca Mountain, Nevada, was monitored over a six-year period, from 1989 through 1994. Yucca Mountain is located at the northern limit of the Mojave Desert and is the only location being studied as a potential repository for high-level nuclear waste. Site characterization consists of a series of multidisciplinary, scientific investigations designed to provide detailed information necessary to assess the suitability of the Yucca Mountain Site as a repository. This vegetation description establishes a baseline for determining the ecological impact of site characterization activities; it porvides input for site characterization research and modeling; and it clarifies vegetation community dynamics and relationships to the physical environment. A companion study will describe the impact of site characterization of vegetation. Cover, density, production, and species composition of vascular plants were monitored at 48 Ecological Study Plots (ESPs) stratified in four vegetation associations. Precipitation, soil moisture, and maximum and minimum temperatures also were measured at each study plot.

  9. The vegetation of Yucca Mountain: Description and ecology

    International Nuclear Information System (INIS)

    1996-01-01

    Vegetation at Yucca Mountain, Nevada, was monitored over a six-year period, from 1989 through 1994. Yucca Mountain is located at the northern limit of the Mojave Desert and is the only location being studied as a potential repository for high-level nuclear waste. Site characterization consists of a series of multidisciplinary, scientific investigations designed to provide detailed information necessary to assess the suitability of the Yucca Mountain Site as a repository. This vegetation description establishes a baseline for determining the ecological impact of site characterization activities; it porvides input for site characterization research and modeling; and it clarifies vegetation community dynamics and relationships to the physical environment. A companion study will describe the impact of site characterization of vegetation. Cover, density, production, and species composition of vascular plants were monitored at 48 Ecological Study Plots (ESPs) stratified in four vegetation associations. Precipitation, soil moisture, and maximum and minimum temperatures also were measured at each study plot

  10. Environmental site description for a Uranium Atomic Vapor Laser Isotope Separation (U-AVLIS) production plant at the Oak Ridge Gaseous Diffusion Plant Site

    Energy Technology Data Exchange (ETDEWEB)

    1991-09-01

    In January 1990, the Secretary of Energy approved a plan for the demonstration and deployment of the Uranium Atomic Vapor Laser Isotope Separation (U-AVLIS) technology, with the near-term goal to provide the necessary information to make a deployment decision by November 1992. The U-AVLIS process is based on electrostatic extraction of photoionized U-235 atoms from an atomic vapor stream created by electron-beam vaporization of uranium metal alloy. A programmatic document for use in screening DOE sites to locate the U-AVLIS production plant was developed and implemented in two parts (Wolsko et al. 1991). The first part consisted of a series of screening analyses, based on exclusionary and other criteria, that identified a reasonable number of candidate sites. These sites were then subjected to a more rigorous and detailed comparative analysis for the purpose of developing a short list of reasonable alternative sites for later environmental examination. This environmental site description (ESD) provides a detailed description of the ORGDP site and vicinity suitable for use in an environmental impact statement (EIS). The report is based on existing literature, data collected at the site, and information collected by Argonne National Laboratory (ANL) staff during a site visit. The organization of the ESD is as follows. Topics addressed in Sec. 2 include a general site description and the disciplines of geology, water resources, biotic resources, air resources, noise, cultural resources, land use, socioeconomics, and waste management. Identification of any additional data that would be required for an EIS is presented in Sec. 3. Following the site description and additional data requirements, Sec. 4 provides a short, qualitative assessment of potential environmental issues. 37 refs., 20 figs., 18 tabs.

  11. Environmental site description for a Uranium Atomic Vapor Laser Isotope Separation (U-AVLIS) production plant at the Oak Ridge Gaseous Diffusion Plant Site

    International Nuclear Information System (INIS)

    1991-09-01

    In January 1990, the Secretary of Energy approved a plan for the demonstration and deployment of the Uranium Atomic Vapor Laser Isotope Separation (U-AVLIS) technology, with the near-term goal to provide the necessary information to make a deployment decision by November 1992. The U-AVLIS process is based on electrostatic extraction of photoionized U-235 atoms from an atomic vapor stream created by electron-beam vaporization of uranium metal alloy. A programmatic document for use in screening DOE sites to locate the U-AVLIS production plant was developed and implemented in two parts (Wolsko et al. 1991). The first part consisted of a series of screening analyses, based on exclusionary and other criteria, that identified a reasonable number of candidate sites. These sites were then subjected to a more rigorous and detailed comparative analysis for the purpose of developing a short list of reasonable alternative sites for later environmental examination. This environmental site description (ESD) provides a detailed description of the ORGDP site and vicinity suitable for use in an environmental impact statement (EIS). The report is based on existing literature, data collected at the site, and information collected by Argonne National Laboratory (ANL) staff during a site visit. The organization of the ESD is as follows. Topics addressed in Sec. 2 include a general site description and the disciplines of geology, water resources, biotic resources, air resources, noise, cultural resources, land use, socioeconomics, and waste management. Identification of any additional data that would be required for an EIS is presented in Sec. 3. Following the site description and additional data requirements, Sec. 4 provides a short, qualitative assessment of potential environmental issues. 37 refs., 20 figs., 18 tabs

  12. Unified description of quasi-free and resonant processes of hypernuclear production and decay

    International Nuclear Information System (INIS)

    Wuensch, R.

    1992-03-01

    We review a unified description of resonant and quasi-free hypernuclear production reactions on the basis of the continuum shell-model. Both reaction mechanisms are considered as boundary cases of the same process. We apply the model to the (K - , π) and to the (π, K + ) reaction on light target nuclei. Particular attention is given to the consequences of the shallow hyperon-nucleus potential. Hypernuclear disintegration by baryon emission is considered as transition from the bound to the unbound part of the configurational space. (orig.)

  13. Description of the Main Features of the Series Production of the LHC Main Dipole Magnets

    CERN Document Server

    Savary, F; Chevret, P; de Rijk, G; Fessia, P; Liénard, P; Miles, J; Modena, M; Rossi, L; Tommasini, D; Vlogaert, J; Bresson, D; Grunblatt, G; Decoene, JF; Bressani, F; Drago, G; Gagliardi, P; Eysselein, F; Gärtner, W; Lublow, P

    2008-01-01

    The series production of the LHC main dipole magnets was completed in November 2006. This paper presents the organization implemented at CERN and the milestones fixed to fullfil the technical requirements and to respect the master schedule of the machine installation. The CERN organization for the production follow-up, the quality assurance and the magnet testing, as well as the organization of the three main contractors will be described. A description of the design work and procurement of most of the specific heavy tooling and key components will be given with emphasis on the advantages and drawbacks.

  14. Feasibility study for co-locating and integrating ethanol production plants from corn starch and lignocellulosic feedstocks

    Energy Technology Data Exchange (ETDEWEB)

    Wallace, Robert [National Renewable Energy Lab. (NREL), Golden, CO (United States); Ibsen, Kelly [National Renewable Energy Lab. (NREL), Golden, CO (United States); McAloon, Andrew [U.S. Department of Agriculture, Washington, D.C. (United States); Yee, Winnie [U.S. Department of Agriculture, Washington, D.C. (United States)

    2005-01-01

    Analysis of the feasibility of co-locating corn-grain-to-ethanol and lignocellulosic ethanol plants and potential savings from combining utilities, ethanol purification, product processing, and fermentation.

  15. The relationship between demographic variables, productivity, and staff burnout among staffs of a hospital located in Ilam city

    Directory of Open Access Journals (Sweden)

    Bahram Kohnavard

    2015-06-01

    Full Text Available Background­ and objectives : Burnout is one of the causes of reduced job performance and productivity, this syndrome in jobs who deal directly with people are more than other professions may be viewed. This study was conducted to investigate the relationship between demographic variables, efficiency, and staff burnout in a hospital. Methods : In this descriptive-analytical study all 100 employees of the hospital were evaluated . People by demographic information , Maslach Burnout questionnaire (MBI and productivity questionnaire were studied . Data analysis was performed using descriptive and inferential statistics . Results : Findings showed there was a significant correlation between the frequency of emotional exhaustion and reduced personal performance scale (the scale of burnout with productivity. Burnout in emotional exhaustion scale for 41 to 50 years and reduction of operation scale for 20 to 30 years old had the highest score . Metamorphosis and efficiency in terms of significant differences between the study found , and those with a bachelor's degree and those with postgraduate highest grade metamorphic and more than had the highest productivity . Respondents with less than 8 hours daily working hours are significantly higher productivity . Metamorphosis in nurses has higher scale scores . Productivity in anesthesia was significantly higher than other occupational groups. Conclusion : According to different levels of burnout and its damaging effects on the health of employees , lower productivity and quality of patient care , while more research on the causes of light , especially in institutional factors . It is suggested to adopt the methods of adjusting and preventive action to reduce this phenomenon .

  16. The GOLD Science Data Center - Algorithm Heritage, Data Product Descriptions and User Services

    Science.gov (United States)

    Lumpe, J. D.; Foroosh, H.; Eastes, R.; Krywonos, A.; Evans, J. S.; Burns, A. G.; Strickland, D. J.; Daniell, R. E.; England, S.; Solomon, S. C.; McClintock, W. E.; Anderson, D. N.

    2013-12-01

    The Global-scale Observations of the Limb and Disk (GOLD) instrument is an imaging spectrograph to be launched onboard a commercial communications satellite in 2017. From its vantage point in geosynchronous orbit GOLD will image the Earth in the far-ultraviolet from 132 to 162 nm. The instrument consists of two independent optical channels, allowing for simultaneous implementation of multiple measurement sequences with different temporal sampling and spectral resolution. In addition to continuously scanning the disk of the Earth, GOLD will also perform routine limb scan and stellar occultation measurements. These measurements will be used to retrieve a variety of data products characterizing the temperature and composition of the thermosphere-ionosphere, and their response to geomagnetic storms and solar forcing. Primary data products include: daytime neutral temperatures near 160 km altitude; daytime O/N2 column density ratios; nighttime peak electron density; thermospheric O2 density profiles (day and night); daytime exospheric neutral temperature on the limb; atmospheric tides from temperature perturbations; and the location and evolution of ionospheric bubbles. GOLD data will be processed at the Science Data Center (SDC) located at the University of Central Florida. The SDC will also serve as the primary gateway for distribution of GOLD data products to end-users. In this talk we summarize the heritage and theoretical basis of the GOLD retrieval algorithms and describe the full range of GOLD data products that will be available at the SDC, including estimates of data latency and quality.

  17. Baseline process description for simulating plutonium oxide production for precalc project

    Energy Technology Data Exchange (ETDEWEB)

    Pike, J. A. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2017-10-26

    Savannah River National Laboratory (SRNL) started a multi-year project, the PreCalc Project, to develop a computational simulation of a plutonium oxide (PuO2) production facility with the objective to study the fundamental relationships between morphological and physicochemical properties. This report provides a detailed baseline process description to be used by SRNL personnel and collaborators to facilitate the initial design and construction of the simulation. The PreCalc Project team selected the HB-Line Plutonium Finishing Facility as the basis for a nominal baseline process since the facility is operational and significant model validation data can be obtained. The process boundary as well as process and facility design details necessary for multi-scale, multi-physics models are provided.

  18. IMAGE-2006 Mosaic: Product Description

    OpenAIRE

    SOILLE Pierre; BIELSKI Conrad

    2008-01-01

    This report describes the IMAGE-2006 mosaic products. Each product consists of a range of information layers grouped into three categories: base layers, mosaic layers, and quality layers. A mosaic product is available for each coverage and data/country region of interest combination.

  19. Appraising manufacturing location

    NARCIS (Netherlands)

    Steenhuis, H.J.; de Bruijn, E.J.

    2002-01-01

    International location of manufacturing activities is an issue for managers of manufacturing companies as well as public policy makers. For managers, the issue is relevant because international locations offer opportunities for lowering costs due to productivity improvements. For governments the

  20. Skin care product evaluation in a group of critically ill, premature neonates: a descriptive study.

    Science.gov (United States)

    Young, Daniel L; Chakravarthy, Debashish; Drower, Edward; Reyna, Roxana

    2014-01-01

    Cleansing, moisturizing, and protecting neonatal skin is important, but literature evaluating specific product lines is limited. The purpose of this study was to measure the influence of a skin care product line on overall skin condition, perineal erythema, and pain when applied to neonates in a neonatal intensive care unit (NICU). This was an open label, descriptive study. Comparisons were made between measurements taken at the beginning of the study to those at the end, on the same subjects. The study was conducted in a 41-bed NICU at Driscoll Children's Hospital in Corpus Christi, Texas, that serves 31 counties in the region. This NICU treats children needing level 2 and 3 care, with a 1:1 or 2:1 nurse staffing ratio. This is not a birthing center; patients come from other community hospitals. Twenty-nine neonates participated in the study; their average body weight was 1.39 kg (3.06 lb) and their average gestation was 31.7 weeks. A skin care product line was introduced into a neonatal intensive care unit for 14 days. The products included 2 cleansers, 2 moisturizers, and a skin protectant with zinc oxide. Three outcome measures were tracked: Neonatal Skin Condition Score (NSCS), Skin Erythema Scale (SES), and pain. Nurses were also given a product evaluation survey. Descriptive statistics were used to report percentages and trends. Paired t tests were used to compare the mean NSCS, SES, and pain scores from the first 2 days a subject was in the study to the mean of the scores from the last 2 days they were in the study. Subjects experienced approximately 1774 exposures to individual products during data collection. No differences were found in pain scores (P = .132), SES score (P = .059), or NSCS (P = .603) when mean values were compared at the beginning and end of the study. Analysis of the product evaluation survey for questions on cleaning, moisturizing, and reducing discomfort found that more than 90% of nurses ranked the new products as better than or

  1. Green facility location

    NARCIS (Netherlands)

    Velázquez Martínez, J.C.; Fransoo, J.C.; Bouchery, Y.; Corbett, C.J.; Fransoo, J.C.; Tan, T.

    2017-01-01

    Transportation is one of the main contributing factors of global carbon emissions, and thus, when dealing with facility location models in a distribution context, transportation emissions may be substantially higher than the emissions due to production or storage. Because facility location models

  2. Allegheny County Polling Place Locations (November 2017)

    Data.gov (United States)

    Allegheny County / City of Pittsburgh / Western PA Regional Data Center — This dataset contains locations of the polling places in Allegheny County.If viewing this description on the Western Pennsylvania Regional Data Center’s open data...

  3. Allegheny County Polling Place Locations (May 2017)

    Data.gov (United States)

    Allegheny County / City of Pittsburgh / Western PA Regional Data Center — This dataset contains locations of the polling places in Allegheny County.If viewing this description on the Western Pennsylvania Regional Data Center’s open data...

  4. Allegheny County Polling Place Locations (November 2015)

    Data.gov (United States)

    Allegheny County / City of Pittsburgh / Western PA Regional Data Center — This dataset contains locations of the polling places in Allegheny County.If viewing this description on the Western Pennsylvania Regional Data Center’s open data...

  5. Onderzoek Location Based Marketing: Mobile = location = effect

    NARCIS (Netherlands)

    Gisbergen, M.S. van; Huhn, A.E.; Khan, V.J.; Ketelaar, P.E.

    2011-01-01

    Onderzoekers van de NHTV (Internationaa Hoger Onderwijs Breda, Radboud Universiteit, DVJ Insights en Popai Benelux lieten consumenten in een virtuele supermarkt advertenties via de smartphone ontvangen wanneer men langs het geadverteerde product liep. De uitkomsten laten zien dat 'location based

  6. Location Systems An Introduction to the Technology Behind Location Awareness

    CERN Document Server

    LaMarca, Anthony

    2008-01-01

    Advances in electronic location technology and the coming of age of mobile computing have opened the door for location-aware applications to permeate all aspects of everyday life. Location is at the core of a large number of high-value applications ranging from the life-and-death context of emergency response to serendipitous social meet-ups. For example, the market for GPS products and services alone is expected to grow to US200 billion by 2015. Unfortunately, there is no single location technology that is good for every situation and exhibits high accuracy, low cost, and universal coverage.

  7. Location performance objectives for the NNWSI area-to-location screening activity

    Energy Technology Data Exchange (ETDEWEB)

    Sinnock, S.; Fernandez, J.A.

    1984-01-01

    Fifty-four objectives were identified to guide the screening of the Nevada Research and Development Area of the Nevada Test Site for relatively favorable locations for the disposal of nuclear waste in a mined geologic repository. The objectives were organized as a hierarchy composed of 4 upper-level, 12 middle-level, and 38 lower-level objectives. The four upper-level objectives account for broad national goals to contain and isolate nuclear waste in an environmentally sound and economically acceptable manner. The middle-level objectives correspond to topical categories that logically relate the upper-level objectives to site-specific concerns such as seismicity, sensitive species, and flooding hazards (represented by the lower-level objectives). The relative merits of alternative locations were compared by an application of decision analysis based on standard utility theory. The relative favorabilities of pertinent physical conditions at each alternative location were weighted in relation to the importance of objectives, and summed to produce maps indicating the most and the least favorable locations. Descriptions of the objectives were organized by the hierarchical format; they detail the applicability of each objective to geologic repository siting, previously published siting criteria corresponding to each objective, and the rationale for the weight assigned to each objective, and the pertinent attributes for evaluating locations with respect to each objective. 51 references, 47 figures, 4 tables.

  8. Location performance objectives for the NNWSI area-to-location screening activity

    International Nuclear Information System (INIS)

    Sinnock, S.; Fernandez, J.A.

    1984-01-01

    Fifty-four objectives were identified to guide the screening of the Nevada Research and Development Area of the Nevada Test Site for relatively favorable locations for the disposal of nuclear waste in a mined geologic repository. The objectives were organized as a hierarchy composed of 4 upper-level, 12 middle-level, and 38 lower-level objectives. The four upper-level objectives account for broad national goals to contain and isolate nuclear waste in an environmentally sound and economically acceptable manner. The middle-level objectives correspond to topical categories that logically relate the upper-level objectives to site-specific concerns such as seismicity, sensitive species, and flooding hazards (represented by the lower-level objectives). The relative merits of alternative locations were compared by an application of decision analysis based on standard utility theory. The relative favorabilities of pertinent physical conditions at each alternative location were weighted in relation to the importance of objectives, and summed to produce maps indicating the most and the least favorable locations. Descriptions of the objectives were organized by the hierarchical format; they detail the applicability of each objective to geologic repository siting, previously published siting criteria corresponding to each objective, and the rationale for the weight assigned to each objective, and the pertinent attributes for evaluating locations with respect to each objective. 51 references, 47 figures, 4 tables

  9. 75 FR 28657 - Dell Products LP-Parmer North Location, a Subsidiary of Dell, Inc., Including On-Site Leased...

    Science.gov (United States)

    2010-05-21

    ... Spherion Corporation; Round Rock, TX; Dell Products LP--Parmer North One; Austin, TX; Amended Certification... Products LP--Parmer North Location, a Subsidiary of Dell, Inc., Including On-Site Leased Workers From... Act of 1974, as amended (``Act''), 19 U.S.C. 2273, the Department of Labor issued a Certification of...

  10. The relationship between symbolic interactionism and interpretive description.

    Science.gov (United States)

    Oliver, Carolyn

    2012-03-01

    In this article I explore the relationship between symbolic interactionist theory and interpretive description methodology. The two are highly compatible, making symbolic interactionism an excellent theoretical framework for interpretive description studies. The pragmatism underlying interpretive description supports locating the methodology within this cross-disciplinary theory to make it more attractive to nonnursing researchers and expand its potential to address practice problems across the applied disciplines. The theory and method are so compatible that symbolic interactionism appears to be part of interpretive description's epistemological foundations. Interpretive description's theoretical roots have, to date, been identified only very generally in interpretivism and the philosophy of nursing. A more detailed examination of its symbolic interactionist heritage furthers the contextualization or forestructuring of the methodology to meet one of its own requirements for credibility.

  11. Locations in Television Drama Series

    DEFF Research Database (Denmark)

    Waade, Anne Marit

    2017-01-01

    This special issue is dedicated to the analysis of the increasingly significant role of location as a key element in television drama. In recent years, the popularity of serial television has progressively been tied to the expanded use of location as a central element in productions, both as sett...... mainly been considered as a practical term in film and television productions....

  12. Different Prices for Identical Products? Market Efficiency and the Virtual Location in B2C E-Commerce

    OpenAIRE

    Häring, Julia

    2003-01-01

    This paper analyses market efficiency and the role of the virtual location in digital markets using a data set containing more than 23,000 price observations from the online market for contact lenses as well as detailed information about online retailer and product characteristics. The data allow to implement and test the concept of virtual location. The empirical results reveal evidence for lower prices and less price dispersion among e-retailers in comparison to hybrid retailers, which supp...

  13. A Calculus of Located Entities

    Directory of Open Access Journals (Sweden)

    Adriana Compagnoni

    2014-03-01

    Full Text Available We define BioScapeL, a stochastic pi-calculus in 3D-space. A novel aspect of BioScapeL is that entities have programmable locations. The programmer can specify a particular location where to place an entity, or a location relative to the current location of the entity. The motivation for the extension comes from the need to describe the evolution of populations of biochemical species in space, while keeping a sufficiently high level description, so that phenomena like diffusion, collision, and confinement can remain part of the semantics of the calculus. Combined with the random diffusion movement inherited from BioScape, programmable locations allow us to capture the assemblies of configurations of polymers, oligomers, and complexes such as microtubules or actin filaments. Further new aspects of BioScapeL include random translation and scaling. Random translation is instrumental in describing the location of new entities relative to the old ones. For example, when a cell secretes a hydronium ion, the ion should be placed at a given distance from the originating cell, but in a random direction. Additionally, scaling allows us to capture at a high level events such as division and growth; for example, daughter cells after mitosis have half the size of the mother cell.

  14. Technology for home dementia care: A prototype locating system put to the test.

    Science.gov (United States)

    Megges, Herlind; Freiesleben, Silka Dawn; Jankowski, Natalie; Haas, Brigitte; Peters, Oliver

    2017-09-01

    The user experience of persons with dementia and their primary caregivers with locating systems is not firmly established. Eighteen dyads used a prototype locating system during 4 weeks. Primary outcome measures were ratings of usability, and product functions and features. Secondary outcome measures were caregiver burden, perceived self-efficacy, frequency of use, and willingness to purchase the prototype. Changes in scores between baseline (T 1 ) and end of testing period (T 2 ) were compared by performing independent and dependent samples correlations and descriptive statistics. Seventeen dyads made up the final sample. Ratings of usability and product functions and features were fair, but usability ratings were significantly reduced after 4 weeks. Although the prototype was used infrequently by majority of the participants, most caregivers would be willing to purchase the prototype, with men more willing than women. No significant change in technological willingness, caregiver burden, or perceived self-efficacy was found between T 1 and T 2 . Perceived self-efficacy significantly negatively correlated with willingness to purchase the prototype after 4 weeks. Results highlight the importance of including end users in the research and development phase of locating systems to improve the user experience in home dementia care. Necessary indications for further research are carrying out randomized controlled trials with larger, more representative samples and developing innovative software and hardware solutions.

  15. Potential for CO2 sequestration and Enhanced Coalbed Methane production in the Netherlands

    International Nuclear Information System (INIS)

    Hamelinck, C.N.; Faaij, A.P.C.; Ruijg, G.J.; Jansen, D.; Pagnier, H.; Van Bergen, F.; Wolf, K.H.; Barzandji, O.; Bruining, H.; Schreurs, H.

    2001-03-01

    The technical and economic feasibility of ECBM (Enhanced Coal Bed Methane) in the Netherlands are explored. The potential and the economic performance are worked out for several ECBM recovery concepts and technological issues are outlined. The research includes the following main activities: Inventory of CO2 sources in the Netherlands and techno-economic analysis of CO2 removal and transport. Several scenarios for CO2 transport of different capacities and distances will be assessed. ECBM production locations are determined by analysis of coal reserves and their characteristics. Four potential areas are assessed: one in eastern Gelderland, two in Limburg and one in Zeeland. Description of ECBM theory and production technology resulting in a time dependent model for ECBM production and CO2 injection. Selection and description of various ECBM production/CO2 sequestration systems. Systems considered include direct delivery of methane to the natural gas grid, production of power (on various scales) and hydrogen. Information from the location assessment is combined with modelling results. Costs of CO2 sequestration are calculated for various scales and configurations. Evaluation of main uncertainties, environmental impacts and sensitivity analyses. Comparison of CBM production systems with reference systems and exploration of potential implementation schemes in the Dutch context. 72 refs

  16. Genetic Algorithm for Solving Location Problem in a Supply Chain Network with Inbound and Outbound Product Flows

    Directory of Open Access Journals (Sweden)

    Suprayogi Suprayogi

    2016-12-01

    Full Text Available This paper considers a location problem in a supply chain network. The problem addressed in this paper is motivated by an initiative to develop an efficient supply chain network for supporting the agricultural activities. The supply chain network consists of regions, warehouses, distribution centers, plants, and markets. The products include a set of inbound products and a set of outbound products. In this paper, definitions of the inbound and outbound products are seen from the region’s point of view.  The inbound product is the product demanded by regions and produced by plants which flows on a sequence of the following entities: plants, distribution centers, warehouses, and regions. The outbound product is the product demanded by markets and produced by regions and it flows on a sequence of the following entities: regions, warehouses, and markets. The problem deals with determining locations of the warehouses and the distribution centers to be opened and shipment quantities associated with all links on the network that minimizes the total cost. The problem can be considered as a strategic supply chain network problem. A solution approach based on genetic algorithm (GA is proposed. The proposed GA is examined using hypothetical instances and its results are compared to the solution obtained by solving the mixed integer linear programming (MILP model. The comparison shows that there is a small gap (0.23%, on average between the proposed GA and MILP model in terms of the total cost. The proposed GA consistently provides solutions with least total cost. In terms of total cost, based on the experiment, it is demonstrated that coefficients of variation are closed to 0.

  17. Efficient Top-k Locality Search for Co-located Spatial Web Objects

    DEFF Research Database (Denmark)

    Qu, Qiang; Liu, Siyuan; Yang, Bin

    2014-01-01

    In step with the web being used widely by mobile users, user location is becoming an essential signal in services, including local intent search. Given a large set of spatial web objects consisting of a geographical location and a textual description (e.g., online business directory entries of re...

  18. What factors influence the choice of urban or rural location for future practice of Nepalese medical students? A cross-sectional descriptive study.

    Science.gov (United States)

    Sapkota, Bhim Prasad; Amatya, Archana

    2015-11-10

    Nepal is experiencing a public health issue similar to the rest of the world, i.e., the geographical maldistribution of physicians. Although there is some documentation about the reasons physicians elect to leave Nepal to work abroad, very little is known about the salient factors that influence the choice of an urban versus rural practice setting for those physicians who do not migrate. In recent years, around 1000 medical students became doctors within Nepal, but their distribution in rural locations is not adequate. The purpose of this study was to explore what factors influence the choice of urban or rural location for the future clinical practice of Nepalese medical students in the final year of their program A cross-sectional descriptive study design was used for this study involving Nepalese medical students in their final year of study and currently doing an internship in a medical college. The sample consisted of 393 medical students from four medical colleges in Nepal that were selected randomly. An anonymous self-administered questionnaire was used for data collection. To determine the association with rural location choice for their future practice setting, a comparison was done that involved demographic, socio-economic, and educational factors. Data were entered in EpiData and analyzed by using SPSS version 16. Among the 393 respondents, two thirds were male (66.9%) and more than half were below 25 years of age. Almost all (93%) respondents were single and about two thirds (63.4%) were of Brahmin and Chhetri ethnic origin. About two thirds (64.1%) of the respondents were born in a rural setting, and 58.8% and 53.3% had a place of rearing and permanent address in a rural location, respectively. The predictors of future rural location choice for their clinical practice (based on the bivariate analysis) included: (a) Rural (versus urban) place of birth, place of rearing, and permanent address (b) Source of family income (service, business, and agriculture

  19. Decisive management in selecting locations for development of construction projects

    Science.gov (United States)

    Szafranko, E.; Pawłowicz, J. A.

    2017-08-01

    The location of an investment project is one of the most important decisions in the construction and land development business. The shape of a new building and aspects of its future use depend on making a good choice of a land plot where it will be constructed. There are many characteristics involved descriptions of land available for development. On the one hand, different buildings (with different envisaged use) fit differently to a given location. Residential homes, for example, require a location which will ensure a peaceful lifestyle, with places for walks and recreation, situated in a relatively quite setting. On the other hand, close proximity to schools, shops or a health clinic is another important consideration. Industrial buildings should be localized so as not to be a nuisance to others, and their location should facilitate efficient transport of raw materials and ready products. Yet other requirements are defined for public buildings. It is therefore evident that the characteristics included in an evaluation of the location of a planned building can be highly diverse and their diversity makes the evaluation difficult. Selection of a location can be supported by a variety of methods. For instance, an evaluation can rely on assigning points which indicate the fulfillment of certain criteria. This approach generates a complex evaluation in the form of tables and maps of usefulness. Another possibility is to make an assessment of the criteria that a given land parcels should satisfy in order to develop a specific type of a building. Having combined these two sets of information, we can create a system or a model for the management of land resources, which will easily help to support decision making processes pertaining to the choice of a location. This article shows a model approach for a specific building.

  20. The Benefits of Franchising and Vertical Disintergration in Monopolistic Competition for Locationally Differentiated Products

    OpenAIRE

    Nicholas Economides

    1993-01-01

    A model of franchising competition in locationally differentiated products is constructed. A franchisor (upstream firm) collects a marginal transfer fee per unit of output sold by a franchisee (downstream firm). For example, the marginal transfer fee can be realized as a markup on variable inputs supplied by the franchisor. A franchisor also collects a lump-sum rent (commonly called "franchising fee") from each franchisee. Acting in the first stage, a franchisor can manipulate the degree of c...

  1. A descriptive study of chiropractors' opinions and practices regarding office-based health product sales

    Directory of Open Access Journals (Sweden)

    Page Stacey A

    2012-04-01

    Full Text Available Abstract Background Although the sale of non-prescription health products is ubiquitous, the views of health professionals, such as chiropractors, regarding the sale of such products are not well known. Practitioner opinion is important to understand and inform professional practice. The purpose of this study was to describe chiropractors' perspectives and practices on the sale of health care products from practitioners' offices. Methods Chiropractors were invited to provide written comments about health product sales at the end of a fixed choice, mailed survey. Respondents' comments were analyzed using qualitative description. Ethics approval was received from the Conjoint Health Research Ethics Board at the University of Calgary. Results One hundred seven of the 265 respondents (response rate of 51% provided written comments. Approximately 30 pages of double-spaced, typed text were gathered. Respondents did not consistently endorse or condemn health product sales, and engaged in the practice to greater and lesser extents. While some were opposed to health products sales, some accepted the practice with a degree of ambivalence whereas others clearly embraced it. Some respondents acknowledged a professional conflict of interest in such sales and marketing, and described strategies used to mitigate it. Others provided a range of justifications for the practice. Personal integrity and professional standards were discussed and a need for monitoring identified. Conclusions A wide range of opinions and practices were described and this is consistent with resulting variation in practice. In light of this, standards that facilitate consistency in practice may benefit professionals and the public alike.

  2. Uranium Location Database

    Data.gov (United States)

    U.S. Environmental Protection Agency — A GIS compiled locational database in Microsoft Access of ~15,000 mines with uranium occurrence or production, primarily in the western United States. The metadata...

  3. Using Pictures to Assess Pain Location in Children.

    Science.gov (United States)

    Mesko, Phyllis J; Eliades, Aris Beoglos

    2018-06-01

    This study uses the Pain Area Locator (PAL) tool, a picture communication aid with body and medical equipment icons, to identify pain location in postoperative pediatric patients and assesses discrepancies between nurses' pain location assessment and pain location identified using the PAL tool. This descriptive study used a quantitative, comparative design, with a convenience sample of pediatric postoperative patients undergoing same-day surgeries at a free-standing, acute care, Magnet designated pediatric hospital. The child's pain location was assessed by asking the child to point to one of the 12 pictures on the PAL tool of where they hurt. All 41 (100%) of the postoperative children in the study demonstrated ability to use the PAL tool. The child identified a pain location in 34 assessments (83%) when the nurse documented no pain location. This investigation expands on previous evidence supporting that children can use the PAL tool to identify the pain location postoperatively. Copyright © 2016 American Society of PeriAnesthesia Nurses. Published by Elsevier Inc. All rights reserved.

  4. Language supports young children's use of spatial relations to remember locations.

    Science.gov (United States)

    Miller, Hilary E; Patterson, Rebecca; Simmering, Vanessa R

    2016-05-01

    Two experiments investigated the role of language in children's spatial recall performance. In particular, we assessed whether selecting an intrinsic reference frame could be improved through verbal encoding. Selecting an intrinsic reference frame requires remembering locations relative to nearby objects independent of one's body (egocentric) or distal environmental (allocentric) cues, and does not reliably occur in children under 5 years of age (Nardini, Burgess, Breckenridge, & Atkinson, 2006). The current studies tested the relation between spatial language and 4-year-olds' selection of an intrinsic reference frame in spatial recall. Experiment 1 showed that providing 4-year-olds with location-descriptive cues during (Exp. 1a) or before (Exp. 1b) the recall task improved performance both overall and specifically on trials relying most on an intrinsic reference frame. Additionally, children's recall performance was predicted by their verbal descriptions of the task space (Exp. 1a control condition). Non-verbally highlighting relations among objects during the recall task (Exp. 2) supported children's performance relative to the control condition, but significantly less than the location-descriptive cues. These results suggest that the ability to verbally represent relations is a potential mechanism that could account for developmental changes in the selection of an intrinsic reference frame during spatial recall. Copyright © 2016 Elsevier B.V. All rights reserved.

  5. High yielding tropical energy crops for bioenergy production: Effects of plant components, harvest years and locations on biomass composition.

    Science.gov (United States)

    Surendra, K C; Ogoshi, Richard; Zaleski, Halina M; Hashimoto, Andrew G; Khanal, Samir Kumar

    2018-03-01

    The composition of lignocellulosic feedstock, which depends on crop type, crop management, locations and plant parts, significantly affects the conversion efficiency of biomass into biofuels and biobased products. Thus, this study examined the composition of different parts of two high yielding tropical energy crops, Energycane and Napier grass, collected across three locations and years. Significantly higher fiber content was found in the leaves of Energycane than stems, while fiber content was significantly higher in the stems than the leaves of Napier grass. Similarly, fiber content was higher in Napier grass than Energycane. Due to significant differences in biomass composition between the plant parts within a crop type, neither biological conversion, including anaerobic digestion, nor thermochemical pretreatment alone is likely to efficiently convert biomass components into biofuels and biobased products. However, combination of anaerobic digestion with thermochemical conversion technologies could efficiently utilize biomass components in generating biofuels and biobased products. Copyright © 2017 Elsevier Ltd. All rights reserved.

  6. Standarized input for Hanford environmental impact statements. Part II: site description

    International Nuclear Information System (INIS)

    Jamison, J.D.

    1982-07-01

    Information is presented under the following section headings: summary description; location and physiography; geology; seismology; hydrology; meteorology; ecology; demography and land use; and radiological condition. Five appendixes are included on the 100N, 200 east, 200 west, 300, and 400 areas. This report is intended to provide a description of the Hanford Site against which the environmental impacts of new projects at Hanford can be assessed. It is expected that the summary description amplified with material from the appropriate appendix, will serve as the basic site description section of environmental impact statements prepared to address the requirements of the National Environmental Policy Act

  7. Prehospital Blood Product Administration Opportunities in Ground Transport ALS EMS - A Descriptive Study.

    Science.gov (United States)

    Mix, Felicia M; Zielinski, Martin D; Myers, Lucas A; Berns, Kathy S; Luke, Anurahda; Stubbs, James R; Zietlow, Scott P; Jenkins, Donald H; Sztajnkrycer, Matthew D

    2018-06-01

    prehospital blood product administration, opportunities for ground administration appear limited within the described system. MixFM, ZielinskiMD, MyersLA, BernsKS, LukeA, StubbsJR, ZietlowSP, JenkinsDH, SztajnkrycerMD. Prehospital blood product administration opportunities in ground transport ALS EMS - a descriptive study. Prehosp Disaster Med. 2018;33(3):230-236.

  8. Refined reservoir description to maximize oil recovery

    International Nuclear Information System (INIS)

    Flewitt, W.E.

    1975-01-01

    To assure maximized oil recovery from older pools, reservoir description has been advanced by fully integrating original open-hole logs and the recently introduced interpretive techniques made available through cased-hole wireline saturation logs. A refined reservoir description utilizing normalized original wireline porosity logs has been completed in the Judy Creek Beaverhill Lake ''A'' Pool, a reefal carbonate pool with current potential productivity of 100,000 BOPD and 188 active wells. Continuous porosity was documented within a reef rim and cap while discontinuous porous lenses characterized an interior lagoon. With the use of pulsed neutron logs and production data a separate water front and pressure response was recognized within discrete environmental units. The refined reservoir description aided in reservoir simulation model studies and quantifying pool performance. A pattern water flood has now replaced the original peripheral bottom water drive to maximize oil recovery

  9. Sensory quality and fatty acid content of springbok (Antidorcas marsupialis) meat: influence of farm location and sex.

    Science.gov (United States)

    Neethling, Jeannine; Muller, Magdalena; van der Rijst, Marieta; Hoffman, Louwrens C

    2018-05-01

    Springbok are harvested for meat production irrespective of farm location or sex from which the meat is derived. The present study investigated the influence of farm location (three farms containing different vegetation types) and sex on the sensory quality of springbok longissimus thoracis et lumborum muscle. The sensory profile (aroma, flavour and texture) was determined by descriptive sensory analysis, in addition to determination of the physical meat quality, proximate and fatty acid composition. Farm location had a significant influence on the sensory quality (gamey and liver-like aroma; beef, liver-like, lamb-like and herbaceous flavour; sweet taste; tenderness; residue; mealiness; Warner-Bratzler shear force; moisture, protein and intramuscular lipid content) and fatty acid content (oleic acid; α-linolenic acid; total saturated and monounsaturated fatty acids; polyunsaturated to saturated fatty acid ratio; total omega-3 polyunsaturated fatty acid; and omega-6 to omega-3 polyunsaturated fatty acid ratio) of springbok meat. Sex influenced the chemical composition of springbok meat; however, the influence on the sensory profile was minor (sweet taste; P meat and should be considered when harvesting for meat production. Sex does not have to be considered for the marketing of springbok meat. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

  10. Information resource description creating and managing metadata

    CERN Document Server

    Hider, Philip

    2012-01-01

    An overview of the field of information organization that examines resource description as both a product and process of the contemporary digital environment.This timely book employs the unifying mechanism of the semantic web and the resource description framework to integrate the various traditions and practices of information and knowledge organization. Uniquely, it covers both the domain-specific traditions and practices and the practices of the ?metadata movement' through a single lens ? that of resource description in the broadest, semantic web sense.This approach more readily accommodate

  11. Standarized input for Hanford environmental impact statements. Part II: site description

    Energy Technology Data Exchange (ETDEWEB)

    Jamison, J.D.

    1982-07-01

    Information is presented under the following section headings: summary description; location and physiography; geology; seismology; hydrology; meteorology; ecology; demography and land use; and radiological condition. Five appendixes are included on the 100N, 200 east, 200 west, 300, and 400 areas. This report is intended to provide a description of the Hanford Site against which the environmental impacts of new projects at Hanford can be assessed. It is expected that the summary description amplified with material from the appropriate appendix, will serve as the basic site description section of environmental impact statements prepared to address the requirements of the National Environmental Policy Act (NEPA).

  12. Feasibility Study for Co-Locating and Integrating Ethanol Production Plants from Corn Starch and Lignocellulosic Feedstocks (Revised)

    Energy Technology Data Exchange (ETDEWEB)

    Wallace, R.; Ibsen, K.; McAloon, A.; Yee, W.

    2005-01-01

    Analysis of the feasibility of co-locating corn-grain-to-ethanol and lignocellulosic ethanol plants and potential savings from combining utilities, ethanol purification, product processing, and fermentation. Although none of the scenarios identified could produce ethanol at lower cost than a straight grain ethanol plant, several were lower cost than a straight cellulosic ethanol plant.

  13. A quantitative description of state-level taxation of oil and gas production in the continental U.S

    International Nuclear Information System (INIS)

    Weber, Jeremy G.; Wang, Yongsheng; Chomas, Maxwell

    2016-01-01

    We provide a quantitative description of state-level taxation of oil and gas production in the continental U.S. for 2004–2013. Aggregate revenues from production taxes nearly doubled in real terms over the period, reaching $10.3 billion and accounting for 20% of tax receipts in the top ten revenue states. The average state had a tax rate of 3.6%; nationally, the average dollar of production was taxed at 4.2%. The oil-specific rate estimated for the study period is $2.4 per barrel or $5.5 per ton of carbon. Lastly, state-level tax rates are two-thirds higher in states excluding oil and gas wells from local property taxes, suggesting that the policies are substitutes for one another. - Highlights: •State tax revenue from oil and gas production nearly doubled from 2004 to 2013. •Nationally, the typical dollar of production is taxed at 4.2%. •The rate applied to the typical dollar of production did not increase over time. •On average oil is taxed at $2.4 per barrel or $5.5 per ton of carbon. •State tax rates are two-thirds higher where oil and gas are not taxed as property.

  14. Location, location, location: Assessing the spatial patterning between marijuana licenses, alcohol outlets and neighborhood characteristics within Washington state.

    Science.gov (United States)

    Tabb, Loni Philip; Fillmore, Christina; Melly, Steven

    2018-04-01

    The availability of marijuana products is becoming increasingly prevalent across the United States (US), many states are allowing for the production, processing, and retailing of these products for medical and/or recreational use. The purpose of this study is to: (1) examine the spatial patterning of marijuana licenses, and (2) examine the impact of alcohol outlets in addition to other neighborhood characteristics on marijuana licenses within the state of Washington. This cross-sectional observational study examined 1458 census tracts in Washington state from 2017, using marijuana and alcohol data from the Washington State Liquor and Cannabis Board as well as neighborhood characteristics data from the American Community Survey 2011-2015 5-year estimates. We used exploratory and formal spatial regression methods, including integrated nested Laplace approximation within a Bayesian statistical framework, to address the study aims. Our results indicate there is significant spatial patterning of marijuana producers and processors across the state. We also found that all marijuana licenses are located in poorer census tracts, and marijuana retailers are co-located in census tracts with off-premises alcohol outlets. Our study provides empirical evidence of the relationship between marijuana licenses, alcohol outlets, and neighborhood characteristics, and has important implications for policymakers in other states currently considering legalizing marijuana-products for medical and/or recreational use. Copyright © 2018 Elsevier B.V. All rights reserved.

  15. Language supports young children’s use of spatial relations to remember locations

    Science.gov (United States)

    Miller, Hilary E.; Patterson, Rebecca; Simmering, Vanessa R.

    2016-01-01

    Two experiments investigated the role of language in children’s spatial recall performance. In particular, we assessed whether selecting an intrinsic reference frame could be improved through verbal encoding. Selecting an intrinsic reference frame requires remembering locations relative to nearby objects independent of one’s body (egocentric) or distal environmental (allocentric) cues, and does not reliably occur in children under 5 years of age (Nardini, Burgess, Breckenridge, & Atkinson, 2006). The current studies tested the relation between spatial language and 4-year-olds’ selection of an intrinsic reference frame in spatial recall. Experiment 1 showed that providing 4-year-olds with location-descriptive cues during (Exp. 1a) or before (Exp. 1b) the recall task improved performance both overall and specifically on trials relying most on an intrinsic reference frame. Additionally, children’s recall performance was predicted by their verbal descriptions of the task space (Exp. 1a control condition). Non-verbally highlighting relations among objects during the recall task (Exp. 2) supported children’s performance relative to the control condition, but significantly less than the location-descriptive cues. These results suggest that the ability to verbally represent relations is a potential mechanism that could account for developmental changes in the selection of an intrinsic reference frame during spatial recall. PMID:26896902

  16. Commercial milk distribution profiles and production locations

    International Nuclear Information System (INIS)

    Deonigi, D.E.; Anderson, D.M.; Wilfert, G.L.

    1994-04-01

    The Hanford Environmental Dose Reconstruction (HEDR) Project was established to estimate radiation doses that people could have received from nuclear operations at the Hanford Site since 1944. For this period iodine-131 is the most important offsite contributor to radiation doses from Hanford operations. Consumption of milk from cows that ate vegetation contaminated by iodine-131 is the dominant radiation pathway for individuals who drank milk (Napier 1992). Information has been developed on commercial milk cow locations and commercial milk distribution during 1945 and 1951. The year 1945 was selected because during 1945 the largest amount of iodine-131 was released from Hanford facilities in a calendar year (Heeb 1993); therefore, 1945 was the year in which an individual was likely to have received the highest dose. The year 1951 was selected to provide data for comparing the changes that occurred in commercial milk flows (i.e., sources, processing locations, and market areas) between World War II and the post-war period. To estimate the doses people could have received from this milk flow, it is necessary to estimate the amount of milk people consumed, the source of the milk, the specific feeding regime used for milk cows, and the amount of iodine-131 contamination deposited on feed

  17. Location, Location, Location.

    Science.gov (United States)

    Finucan, Karen

    2000-01-01

    Discusses how good schools have drawing power in revitalizing both urban and rural communities and increasing property values. Several examples of the value of school renovation and its impact on the surrounding community and enrollment are discussed, including descriptions of planning and financing renovation efforts by some communities. (GR)

  18. The locational implications of management and production fragmentation

    Directory of Open Access Journals (Sweden)

    Carlos Eduardo Lobo e Silva

    2010-09-01

    Full Text Available The main purpose of the work is to provide a theoretical link between the location decision and the internal organization of firms. In the simulation presented, (1 communication costs within the firm and (2 managerial structures affect both the production fragmentation process and the economic specialization of cities. More specifically, as either communication costs diminish or managerial structures become more flexible, manufacturing plants tend to move from the big city to medium cities, whereas headquarters and business services tend to agglomerate in the metropolitan area. The introduction of the internal organization of firms into the model, an aspect that is not modeled by Jones-Kierzkowski's approach, allows this article to formalize some empirical evidences pointed out by the literature.O objetivo central deste trabalho é mostrar a importância que a organização interna das firmas pode ter na decisão de localização das empresas e, consequentemente, no processo de fragmentação espacial da produção. Na simulação proposta, na medida em que os custos de comunicação diminuem ou as estruturas gerenciais se tornam mais flexíveis, as fábricas tendem a se localizar nas cidades médias, enquanto as administrações centrais das firmas se aglomeram nas áreas metropolitanas. A introdução da organização interna das firmas no modelo, um aspecto não levado em conta pela abordagem proposta por Jones e Kierzkowski, permite formalizar evidências empíricas apontadas pela literatura recente.

  19. Design requirements for SRB production control system. Volume 2: System requirements and conceptual description

    Science.gov (United States)

    1981-01-01

    In the development of the business system for the SRB automated production control system, special attention had to be paid to the unique environment posed by the space shuttle. The issues posed by this environment, and the means by which they were addressed, are reviewed. The change in management philosphy which will be required as NASA switches from one-of-a-kind launches to multiple launches is discussed. The implications of the assembly process on the business system are described. These issues include multiple missions, multiple locations and facilities, maintenance and refurbishment, multiple sources, and multiple contractors. The implications of these aspects on the automated production control system are reviewed including an assessment of the six major subsystems, as well as four other subsystem. Some general system requirements which flow through the entire business system are described.

  20. Location influences snacking behavior of US infants, toddlers and preschool children.

    Science.gov (United States)

    Jacquier, Emma F; Deming, Denise M; Eldridge, Alison L

    2018-06-13

    Compare at-home and away-from-home snacking patterns of US infants and young children. A secondary analysis was conducted using nationwide, cross-sectional dietary survey data from the US Feeding Infants and Toddlers Study (FITS) 2008. The sample included infants (6-11.9 months, n = 505), toddlers (12-23.9 months, n = 925), preschool children (24-47.9 months, n = 1461). Weighted population descriptive statistics (means and standard errors) were calculated using SAS. Significance was determined at P ≤ 0.05. The main outcome measures of the analyses were the percent of children consuming snacks by location (at home, away from home) and snacking period (morning, afternoon and evening), energy and food groups consumed during snacks. Snacking at home was more prevalent than snacking away from home (toddlers, 73% vs 27%; preschoolers, 67% vs 33%). Away-from-home snacks provided about 50 additional calories per day for toddlers (346 vs 298 kcal/day, P ≤ 0.05) and preschoolers (371 vs 326 kcal/day, P ≤ 0.05) versus snacks consumed at home. Caregivers made similar snack choices for toddlers and preschoolers (milk/milk products, fruit/juice, grains and sweets) but differed in frequency of consumption by location. Among toddlers, milk/milk products were the most frequently consumed snacks at home (66%), while sweets were the top snacks consumed away from home (69%). Among preschoolers, sweets were the top snacks both at home (60%) and away (83%). Location is an important factor influencing snacking patterns of young children and should be considered when developing feeding guidelines. This data may be of use in the upcoming development of dietary guidelines in the U.S. for the population aged 0-2 years.

  1. 27 CFR 555.206 - Location of magazines.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 3 2010-04-01 2010-04-01 false Location of magazines. 555... EXPLOSIVES, DEPARTMENT OF JUSTICE EXPLOSIVES COMMERCE IN EXPLOSIVES Storage § 555.206 Location of magazines. (a) Outdoor magazines in which high explosives are stored must be located no closer to inhabited...

  2. Oral and Written Picture Description in Individuals with Aphasia

    Science.gov (United States)

    Vandenborre, Dorien; Visch-Brink, Evy; van Dun, Kim; Verhoeven, Jo; Mariën, Peter

    2018-01-01

    Background: Aphasia is characterized by difficulties in connected speech/writing. Aims: To explore the differences between the oral and written description of a picture in individuals with chronic aphasia (IWA) and healthy controls. Descriptions were controlled for productivity, efficiency, grammatical organization, substitution behaviour and…

  3. "The only way is up" : Location and movement in product packaging as predictors of sensorial impressions and brand identity

    NARCIS (Netherlands)

    van Rompay, Thomas J.L.; Fransen, M.L.; Borgelink, B.; Brassett, J.; McDonnell, J.; Malpass, M.; Hekkert, P.P.M.; Ludden, G.D.S.

    2012-01-01

    Based on embodiment research linking visual-spatial design parameters to symbolic meaning portrayal, this study investigates to what extent location of imagery on product packaging and visual devices portraying movement (i.e., an arrow indicating movement along an upward-headed or downward-headed

  4. Human population and activities in Forsmark. Site description

    Energy Technology Data Exchange (ETDEWEB)

    Miliander, Sofia; Punakivi, Mari; Kylaekorpi, Lasse; Rydgren, Bernt [SwedPower AB, Stockholm (Sweden)

    2004-12-01

    The Swedish Nuclear Fuel and Waste Management Co (SKB) is in the process of selecting a safe and environmentally acceptable location for a deep repository of radioactive waste. Two alternative locations are under investigation. These are Forsmark, Oesthammars kommun (kommun = municipality) and Simpevarp/Laxemar, Oskarshamns kommun. SKB has expressed the importance of describing the humans and their activities in these areas and therefore has this synthesis concerning the human population in Forsmark been produced.The description is a statistical synthesis, mainly based upon statistical data from SCB (Statistics Sweden) that has been collected, processed and analysed. The statistical data has not been verified through site inspections and interviews. When using statistical data, it is advisable to note that the data becomes more unreliable if the areas are small, with small populations.The data in this description is essential for future evaluations of the impact on the environment and its human population (Environmental Impact Assessments). The data is also important when modelling the potential flows of radio nuclides and calculating the risk of exposure in future safety assessments.The actual area for the study is in this report called 'the Forsmark area', an area of 19.5 km{sup 2} near Forsmark nuclear power plant. The land use in the Forsmark area differs notably from the land use in Uppsala laen (laen = county). Only 0.04% of the total area is developed (built-up) compared to 4.9% in Uppsala laen and only 4% is agricultural land compared to 25% in the county. Furthermore, there are far more forest, wetlands and water areas in the Forsmark area. The forest area represents as much as 72.5% of the total area.The Forsmark area is uninhabited, and its surroundings are very sparsely populated. In 2002, the population density in Forsmark was 1.8 inhabitants per square kilometre, which was 24 times lower than in Uppsala laen. The population density in the

  5. Human population and activities in Forsmark. Site description

    International Nuclear Information System (INIS)

    Miliander, Sofia; Punakivi, Mari; Kylaekorpi, Lasse; Rydgren, Bernt

    2004-12-01

    The Swedish Nuclear Fuel and Waste Management Co (SKB) is in the process of selecting a safe and environmentally acceptable location for a deep repository of radioactive waste. Two alternative locations are under investigation. These are Forsmark, Oesthammars kommun (kommun = municipality) and Simpevarp/Laxemar, Oskarshamns kommun. SKB has expressed the importance of describing the humans and their activities in these areas and therefore has this synthesis concerning the human population in Forsmark been produced.The description is a statistical synthesis, mainly based upon statistical data from SCB (Statistics Sweden) that has been collected, processed and analysed. The statistical data has not been verified through site inspections and interviews. When using statistical data, it is advisable to note that the data becomes more unreliable if the areas are small, with small populations.The data in this description is essential for future evaluations of the impact on the environment and its human population (Environmental Impact Assessments). The data is also important when modelling the potential flows of radio nuclides and calculating the risk of exposure in future safety assessments.The actual area for the study is in this report called 'the Forsmark area', an area of 19.5 km 2 near Forsmark nuclear power plant. The land use in the Forsmark area differs notably from the land use in Uppsala laen (laen = county). Only 0.04% of the total area is developed (built-up) compared to 4.9% in Uppsala laen and only 4% is agricultural land compared to 25% in the county. Furthermore, there are far more forest, wetlands and water areas in the Forsmark area. The forest area represents as much as 72.5% of the total area.The Forsmark area is uninhabited, and its surroundings are very sparsely populated. In 2002, the population density in Forsmark was 1.8 inhabitants per square kilometre, which was 24 times lower than in Uppsala laen. The population density in the parish has been

  6. Heavy-quark production as a sensitive test for an improved description of high-energy hadron collisions

    CERN Document Server

    Hagler, P; Schäfer, A; Szymanowski, L; Teryaev, O V

    2000-01-01

    QCD dynamics at small quark and gluon momentum fractions or large total energy, which plays a major role for DESY HERA, the Fermilab Tevatron, BNL RHIC and CERN LHC physics, is still poorly understood. For one of the simplest processes, namely bb production, next-to- leading-order perturbation theory fails. We show that the combination of two recently developed theoretical concepts, the k/sub perpendicular to / factorization and the next-to-leading-logarithmic- approximation Balitskii-Fadin-Kuraev-Lipatov vertex, gives perfect agreement with data. One can therefore hope that these concepts provide a valuable foundation for the description of other high energy processes. (18 refs).

  7. Multiparticle model for the description of the neutron-production in the plasma focus

    International Nuclear Information System (INIS)

    Ruhs, N.

    Following a comparison of the various numerical methods the experimental set-up is described. This is followed by a brief description of the MHD computation on which the particle computation is to be based. A description is given of the methods applied for the particle computation

  8. Animal-derived natural products of Sowa Rigpa medicine: Their pharmacopoeial description, current utilization and zoological identification.

    Science.gov (United States)

    Yeshi, Karma; Morisco, Paolo; Wangchuk, Phurpa

    2017-07-31

    The Bhutanese Sowa Rigpa medicine (BSM) uses animal parts in the preparation of numerous polyingredient traditional remedies. Our study reports the taxonomical identification of medicinal animals and the description of traditional uses in English medical terminologies. To taxonomically identify the medicinal animals and their derived natural products used as a zootherapeutic agents in BSM. First, the traditional textbooks were reviewed to generate a list of animal products described as ingredients. Second, animal parts that are currently used in Bhutan were identified. Third, the ethnopharmacological uses of each animal ingredients were translated into English medical terminologies by consulting Traditional Physicians, clinical assistants, pharmacognosists, and pharmacists in Bhutan. Fourth, the animal parts were taxonomically identified and their Latin names were confirmed by crosschecking them with online animal databases and relevant scientific literature. The study found 73 natural products belonging to 29 categories derived from 45 medicinal animals (36 vertebrates and 9 invertebrates), comprising of 9 taxonomic categories and 30 zoological families. Out of 116 formulations currently produced, 87 of them contain one or more extracts and products obtained from 13 medicinal animals to treat more than 124 traditionally classified illnesses. Only five animal ingredients were found available in Bhutan and rest of the animal parts are being imported from India. Out of 73 natural products described in the traditional textbooks, only 13 of them (some omitted and few substituted by plants) are currently included in 87 formulations of BSM. Copyright © 2017 Elsevier Ireland Ltd. All rights reserved.

  9. Conditions of milk production of family farms located in the municipality of Alegre – ES, Brazil

    Directory of Open Access Journals (Sweden)

    Francisca Carvalho Nascimento Neta

    2015-12-01

    Full Text Available The present study aimed to assess the conditions and practices of production of raw milk used by farmers, as well as the conditions of storage and of the facilities and structures of the locations of the four collective cooling tanks, in the municipality of Alegre – ES. Data on sanitization procedures and physical structure of barns, source and treatment of water, hygiene practices and health status of milkers, udder cleaning and disinfection procedures and sanitary control of the herd was collected. The physical structure of the locations of the tanks was also assessed. The barns were ventilated, protected from moisture and had covers, and few had cemented floor and milking parlor. A low percentage of producers performed pre (21% and post (6% dipping procedures. Only 1/4 of the farmers used the mug test. All equipment and tools were washed after milking, but few farmers (5% used sanitizers and 94% of the farms used untreated water. Only 8% of the milkers had the habit of washing their hands before milking, and 9% of them were aware of IN 62 regulation of the Ministry of Agriculture, Livestock and Supply. None of the facilities had protection against the entrance of insects, rodents and environmental contaminants. They were poorly sized, did not allow the application of adequate sanitary measures and sanitary conditions were deficient. The high level of nonconformities regarding good manufacturing practices for milk production reinforced the need for the implementation of Good Agricultural Practices in rural farms for the purpose of obtaining milk produced according to the quality standards, preventing losses and ensuring the sustainability of dairy production in the region.

  10. Product operator descriptions of INEPT and RINEPT NMR spectroscopies for ISn ( I=1/2, S=3/2) spin systems

    Science.gov (United States)

    Tokatlı, Ahmet; Gençten, Azmi; Şahin, Mükerrem; Tezel, Özden; Bahçeli, Semiha

    2004-07-01

    The product operator descriptions of INEPT and reverse INEPT (RINEPT) NMR experiments are introduced for weakly coupled ISn ( I=1/2, S=3/2 with n=1,2,3) spin systems. Explicit expressions for polarization transfer from spin-3/2 quadrupolar nuclei to spin-1/2 nuclei (and reversed polarization transfer) are given in detail by using the evolutions of product operators under the spin-spin coupling Hamiltonian. The results calculated for the intensities and positions of the observable signals are simulated in the molecules containning the 119Sn ( I=1/2) and 35Cl ( S=3/2) nuclei at the coupling constant of JSn-Cl=375 Hz by using the Maple programme on computer.

  11. Forest resources, government policy, and investment location decisions of the forest products industry in the southern United States

    Science.gov (United States)

    Changyou Sun; Daowei Zhang

    2010-01-01

    In this article, the results of an initial attempt to estimate the effects of state attributes on plant location and investment expenditure were presented for the forest products industry in the southern United States. A conditional logit model was used to analyze new plant births, and a time-series cross-section model to assess the total capital expenditure....

  12. 27 CFR 40.113 - Change in location to another region.

    Science.gov (United States)

    2010-04-01

    ... another region. 40.113 Section 40.113 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND... Products Changes in Location of Factory § 40.113 Change in location to another region. Whenever a manufacturer of tobacco products intends to remove his factory to another region, the manufacturer shall...

  13. Modeling a four-layer location-routing problem

    Directory of Open Access Journals (Sweden)

    Mohsen Hamidi

    2012-01-01

    Full Text Available Distribution is an indispensable component of logistics and supply chain management. Location-Routing Problem (LRP is an NP-hard problem that simultaneously takes into consideration location, allocation, and vehicle routing decisions to design an optimal distribution network. Multi-layer and multi-product LRP is even more complex as it deals with the decisions at multiple layers of a distribution network where multiple products are transported within and between layers of the network. This paper focuses on modeling a complicated four-layer and multi-product LRP which has not been tackled yet. The distribution network consists of plants, central depots, regional depots, and customers. In this study, the structure, assumptions, and limitations of the distribution network are defined and the mathematical optimization programming model that can be used to obtain the optimal solution is developed. Presented by a mixed-integer programming model, the LRP considers the location problem at two layers, the allocation problem at three layers, the vehicle routing problem at three layers, and a transshipment problem. The mathematical model locates central and regional depots, allocates customers to plants, central depots, and regional depots, constructs tours from each plant or open depot to customers, and constructs transshipment paths from plants to depots and from depots to other depots. Considering realistic assumptions and limitations such as producing multiple products, limited production capacity, limited depot and vehicle capacity, and limited traveling distances enables the user to capture the real world situations.

  14. Description of individual data items and codes in CRIB

    Science.gov (United States)

    Keefer, Eleanor K.; Calkins, James Alfred

    1978-01-01

    The U.S. Geological Survey's Computerized Resources Information Bank (CRIB) is being made available for public use through the computer facilities of the University of Oklahoma and the General Electric Company, U.S.A. The use of General Electric's worldwide information-services network provides access to the CRIB file to a worldwide clientele. This manual, which consists of two chapters, is intended as a guide to users who wish to interrogate the file. Chapter A contains a description of the CRIB file, information on the use of the GIPSY retrieval system, and a description of the General Electric MARK III Service. Chapter B contains a description of the individual data items in the CRIB record as well as code lists. CRIB consists of a set of variable-length records on the metallic and nonmetallic mineral resources of the United States and other countries. At present, 31,645 records in the master file are being made available. The record contains information on mineral deposits and mineral commodities. Some topics covered are: deposit name, location, commodity information, description of deposit, geology, production, reserves, potential resources, and references. The data are processed by the GIPSY program, which maintains the data file and builds, updates, searches, and prints the records using simple yet versatile command statements. Searching and selecting records is accomplished by specifying the presence, absence, or content of any element of information in the record; these specifications can be logically linked to prepare sophisticated search strategies. Output is available in the form of the complete record, a listing of selected parts of the record, or fixed-field tabulations. The General Electric MARK III Service is a computerized information services network operating internationally by land lines, satellites, and undersea cables. The service is available by local telephone to 500 cities in North America, Western Europe, Australia, Southeast Asia, Japan

  15. 27 CFR 40.111 - Change in location within same region.

    Science.gov (United States)

    2010-04-01

    ... same region. 40.111 Section 40.111 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND... Products Changes in Location of Factory § 40.111 Change in location within same region. Whenever a manufacturer of tobacco products intends to relocate his factory within the same region, the manufacturer shall...

  16. Location, location, location: Extracting location value from house prices

    OpenAIRE

    Kolbe, Jens; Schulz, Rainer; Wersing, Martin; Werwatz, Axel

    2012-01-01

    The price for a single-family house depends both on the characteristics of the building and on its location. We propose a novel semiparametric method to extract location values from house prices. After splitting house prices into building and land components, location values are estimated with adaptive weight smoothing. The adaptive estimator requires neither strong smoothness assumptions nor local symmetry. We apply the method to house transactions from Berlin, Germany. The estimated surface...

  17. An Efficient Genetic Algorithm to Solve the Intermodal Terminal Location problem

    Directory of Open Access Journals (Sweden)

    Mustapha Oudani

    2014-11-01

    Full Text Available The exponential growth of the flow of goods and passengers, fragility of certain products and the need for the optimization of transport costs impose on carriers to use more and more multimodal transport. In addition, the need for intermodal transport policy has been strongly driven by environmental concerns and to benefit from the combination of different modes of transport to cope with the increased economic competition. This research is mainly concerned with the Intermodal Terminal Location Problem introduced recently in scientific literature which consists to determine a set of potential sites to open and how to route requests to a set of customers through the network while minimizing the total cost of transportation. We begin by presenting a description of the problem. Then, we present a mathematical formulation of the problem and discuss the sense of its constraints. The objective function to minimize is the sum of road costs and railroad combined transportation costs. As the Intermodal Terminal Location Problemproblem is NP-hard, we propose an efficient real coded genetic algorithm for solving the problem. Our solutions are compared to CPLEX and also to the heuristics reported in the literature. Numerical results show that our approach outperforms the other approaches.

  18. Paradox Basin site characterization report: preparation papers, Gibson Dome location

    International Nuclear Information System (INIS)

    1982-11-01

    This document contains Part C, Identification of Pertinent Issues, of the site characterization report. The site characterization report, preparation papers, includes a description of detailed field studies and efforts to collect data to resolve key geologic and environmental issues in the Gibson Dome location within the Paradox Basin Region of Utah

  19. Location of slaughterhouses under economies of scale

    NARCIS (Netherlands)

    van den Broek, J.J.J.; Schütz, P.; Stougie, L.; Tomasgard, A.

    2006-01-01

    The facility location problem described in this paper comes from an industrial application in the slaughterhouse industry of Norway. Investigations show that the slaughterhouse industry experiences economies of scale in the production facilities. We examine a location-allocation problem focusing on

  20. 14 CFR 21.43 - Location of manufacturing facilities.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Location of manufacturing facilities. 21.43... CERTIFICATION PROCEDURES FOR PRODUCTS AND PARTS Type Certificates § 21.43 Location of manufacturing facilities... location of the manufacturer's facilities places no undue burden on the FAA in administering applicable...

  1. RFID Location Algorithm

    Directory of Open Access Journals (Sweden)

    Wang Zi Min

    2016-01-01

    Full Text Available With the development of social services, people’s living standards improve further requirements, there is an urgent need for a way to adapt to the complex situation of the new positioning technology. In recent years, RFID technology have a wide range of applications in all aspects of life and production, such as logistics tracking, car alarm, security and other items. The use of RFID technology to locate, it is a new direction in the eyes of the various research institutions and scholars. RFID positioning technology system stability, the error is small and low-cost advantages of its location algorithm is the focus of this study.This article analyzes the layers of RFID technology targeting methods and algorithms. First, RFID common several basic methods are introduced; Secondly, higher accuracy to political network location method; Finally, LANDMARC algorithm will be described. Through this it can be seen that advanced and efficient algorithms play an important role in increasing RFID positioning accuracy aspects.Finally, the algorithm of RFID location technology are summarized, pointing out the deficiencies in the algorithm, and put forward a follow-up study of the requirements, the vision of a better future RFID positioning technology.

  2. Integrating Non-Spatial Preferences into Spatial Location Queries

    DEFF Research Database (Denmark)

    Qu, Qiang; Liu, Siyuan; Yang, Bin

    2014-01-01

    Increasing volumes of geo-referenced data are becoming available. This data includes so-called points of interest that describe businesses, tourist attractions, etc. by means of a geo-location and properties such as a textual description or ratings. We propose and study the efficient implementation...... of a new kind of query on points of interest that takes into account both the locations and properties of the points of interest. The query takes a result cardinality, a spatial range, and property-related preferences as parameters, and it returns a compact set of points of interest with the given...... cardinality and in the given range that satisfies the preferences. Specifically, the points of interest in the result set cover so-called allying preferences and are located far from points of interest that possess so-called alienating preferences. A unified result rating function integrates the two kinds...

  3. 7 CFR 52.3181 - Product description.

    Science.gov (United States)

    2010-01-01

    ... MARKETING ACT OF 1946 PROCESSED FRUITS AND VEGETABLES, PROCESSED PRODUCTS THEREOF, AND CERTAIN OTHER... matured prune plums from which the greater portion of moisture is removed by drying. The dried prunes are...

  4. Towards unification of product and enterprise system descriptions

    CSIR Research Space (South Africa)

    Erasmus, J

    2015-06-01

    Full Text Available are utilised by enterprises and some product systems contain entire businesses, such as the operating and maintenance business of a power station. Thus, products are part of enterprises, but enterprises may also be part of product systems. To enable the design...

  5. Fuel from Wastewater - Harnessing a Potential Energy Source in Canada through the Co-location of Algae Biofuel Production to Sources of Effluent, Heat and CO2

    Science.gov (United States)

    Klise, G. T.; Roach, J. D.; Passell, H. D.; Moreland, B. D.; O'Leary, S. J.; Pienkos, P. T.; Whalen, J.

    2010-12-01

    Sandia National Laboratories is collaborating with the National Research Council (NRC) Canada and the National Renewable Energy Laboratory (NREL) to develop a decision-support model that will evaluate the tradeoffs associated with high-latitude algae biofuel production co-located with wastewater, CO2, and waste heat. This project helps Canada meet its goal of diversifying fuel sources with algae-based biofuels. The biofuel production will provide a wide range of benefits including wastewater treatment, CO2 reuse and reduction of demand for fossil-based fuels. The higher energy density in algae-based fuels gives them an advantage over crop-based biofuels as the “production” footprint required is much less, resulting in less water consumed and little, if any conversion of agricultural land from food to fuel production. Besides being a potential source for liquid fuel, algae have the potential to be used to generate electricity through the burning of dried biomass, or anaerobically digested to generate methane for electricity production. Co-locating algae production with waste streams may be crucial for making algae an economically valuable fuel source, and will certainly improve its overall ecological sustainability. The modeling process will address these questions, and others that are important to the use of water for energy production: What are the locations where all resources are co-located, and what volumes of algal biomass and oil can be produced there? In locations where co-location does not occur, what resources should be transported, and how far, while maintaining economic viability? This work is being funded through the U.S. Department of Energy (DOE) Biomass Program Office of Energy Efficiency and Renewable Energy, and is part of a larger collaborative effort that includes sampling, strain isolation, strain characterization and cultivation being performed by the NREL and Canada’s NRC. Results from the NREL / NRC collaboration including specific

  6. The food choice kaleidoscope. A framework for structured description of product, place and person as sources of variation in food choices.

    Science.gov (United States)

    Jaeger, Sara R; Bava, Christina M; Worch, Thierry; Dawson, John; Marshall, David W

    2011-04-01

    Despite a wide range of research approaches already being used to study eating and drinking, this complex aspect of human activity lacks conceptualisation and methodology for structured description of food choices. This paper introduces a metaphoric framework--the food choice kaleidoscope--as an approach to such inquiry. It conceptualises individual food choice events (or eating occasions) as being shaped by three main factors--product, person and place--and provides a descriptive approach through which patterns and variability in food choice events can be observed. The factors can be studied separately or in combination to reveal the joint influence of product, place and/or person factors. The approach is 'data hungry' and requires information about large numbers of eating occasions obtained for a variety of foods/beverage in a variety of situations. Using information about ∼5800 eating occasions obtained from 25 New Zealand women who self-completed 24-h recall diaries, the kaleidoscopic approach is illustrated. The data are analysed in relation to 30 food/beverage categories and 37 contextual (or 'place') variables, and at the level of individual participants. Results are presented that document: product-to-product variability in who eats/drinks what and where/how it is consumed; place-to-place variation in what is consumed and by whom; and person-to-person variability in what is consumed and where/how it is consumed. The most significant insight to emerge is the considerable heterogeneity that is hidden beneath the average patterns, and that average values may be inappropriate/irrelevant for this type of data. Copyright © 2011 Elsevier Ltd. All rights reserved.

  7. Reference design description for a geologic repository. Revision 02

    International Nuclear Information System (INIS)

    1999-01-01

    This Reference Design Description explains the current design for a potential geologic repository that may be located at Yucca Mountain in Nevada. It describes the proposed design for a surface facility, subsurface repository, and waste packaging; it also presents the current design of the key engineering systems for the final four phases: operations, monitoring, closure, and postclosure. In addition, this Reference Design Description reviews the expected long-term performance of the potential repository. In accordance with current law, this design does not include an interim storage option. This document has six major sections. Section 1 describes the physical layout of the proposed repository. The second section describes the 4-phase evolution of the development of the proposed repository. Section 3 describes the reception of waste from offsite locations. The fourth section details the various systems that will package the waste and move it below ground as well as safety monitoring and closure. Section 5 describes the systems (both physical and analytical) that ensure continued safety after closure. The final section offers design options that may be adopted to increase the margin of safety

  8. Visuo-spatial knowledge acquisition in individuals with Down syndrome: The role of descriptions and sketch maps.

    Science.gov (United States)

    Meneghetti, Chiara; Lanfranchi, Silvia; Carretti, Barbara; Toffalini, Enrico

    2017-04-01

    Few studies on individuals with Down syndrome (DS) have explored how they learn space. The present study examines space learning from verbal descriptions in individuals with DS, and explores the role of external cues (such as a sketch map). Twenty-eight individuals with DS and 28 matched typically-developing (TD) children listened to route or survey descriptions with or without seeing a corresponding sketch map (Description+Sketch Map [D+SM] and Description alone [D], respectively). After hearing each description, they performed tasks that involved recognizing, arranging sequentially, and locating landmarks. The results showed that individuals with DS performed less well in recognizing landmarks and arranging them sequentially. The D+SM condition produced general benefits in both groups' accuracy, though the improvement in locating landmarks was greater in the TD than in the DS group. In both groups, the D+SM condition prompted a better performance than the D condition when participants arranged landmarks sequentially after hearing a description from a route perspective, but not from a survey perspective. Overall, our results show that individuals with DS benefited when a spatial description was associated with a corresponding sketch map, albeit to a lesser degree than TD children. The findings are discussed in the light of the literature on DS and on spatial cognition in the TD domain. Copyright © 2017 Elsevier Ltd. All rights reserved.

  9. Infrastructure and industrial location : a dual technology approach

    OpenAIRE

    Bjorvatn, Kjetil

    2001-01-01

    The paper investigates how differences in infrastructure quality may affect industrial location between countries. Employing a dualtechnology model, the main result of the paper is the somewhat surprising conclusion that an improvement in a country’s infrastructure may weaken its locational advantage and induce a firm to locate production in a country with a less efficient infrastructure.

  10. Location and regional productive specialization in Colombia

    Directory of Open Access Journals (Sweden)

    Henry Antonio Mendoza Tolosa

    2017-03-01

    Full Text Available This document is directed to responding if Colombian regional economies restructured their productive activities from 2000 to 2014, and if so, illustrate the way that process has been effective in the different departments from the results and dynamics of their economic activities. For developing this exercise, we used a set of statistical indicators of spatial geography, among which is the factorial analysis, specifically the method of principal components, whose purpose was to identify the set activities whose performance explains more clearly the productive orientation of the departments, and complementary synthetic regional specialization indexes were employed in order to identify the degree and the changes of economic diversification, presented in those indicators. The results of this research shows that most of the Colombian regions have diversified their economic activity, with focus on service activities, among which are representative government and non-market services produced by those institutions, nowadays less dependent on few sources of growth. However, in other regions the primary sector, mainly mining activity, for many years has been the most important activity of production structures, affecting the process of full diversification, which is close to current local demands and international economic order the requests with greater intensity.

  11. Toward crustacean without chemicals: a descriptive analysis of consumer response using price comparisons

    Directory of Open Access Journals (Sweden)

    Charles Odilichukwu R. Okpala

    2016-10-01

    Full Text Available Background: To date, there seems to be limited-to-zero emphasis about how consumers perceive crustacean products subject to either chemical and or non-chemical preservative treatments. In addition, studies that investigated price comparisons of crustacean products subject to either chemical or chemical-free preservative methods seem unreported. Objective: This study focused on providing some foundational knowledge about how consumers perceive traditionally harvested crustaceans that are either chemical-treated and or free of chemicals, incorporating price comparisons using a descriptive approach. Design: The study design employed a questionnaire approach via interview using a computer-assisted telephone system and sampled 1,540 participants across five key locations in Italy. To actualize consumer sensitivity, ‘price’ was the focus given its crucial role as a consumption barrier. Prior to this, variables such as demographic characteristics of participants, frequency of purchasing, quality attributes/factors that limit the consumption of crustaceans were equally considered. Results: By price comparisons, consumers are likely to favor chemical-free (modified atmosphere packaging crustacean products amid a price increase of up to 15%. But, a further price increase such as by 25% could markedly damage consumers’ feelings, which might lead to a considerable number opting out in favor of either chemical-treated or other seafood products. Comparing locations, the studied variables showed no statistical differences (p>0.05. On the contrary, the response weightings fluctuated across the studied categories. Both response weightings and coefficient of variation helped reveal more about how responses deviated per variable categories. Conclusions: This study has revealed some foundational knowledge about how consumers perceive traditionally harvested crustaceans that were either chemical-treated or subject to chemical-free preservative up to price

  12. Toward crustacean without chemicals: a descriptive analysis of consumer response using price comparisons.

    Science.gov (United States)

    Okpala, Charles Odilichukwu R; Bono, Gioacchino; Pipitone, Vito; Vitale, Sergio; Cannizzaro, Leonardo

    2016-01-01

    To date, there seems to be limited-to-zero emphasis about how consumers perceive crustacean products subject to either chemical and or non-chemical preservative treatments. In addition, studies that investigated price comparisons of crustacean products subject to either chemical or chemical-free preservative methods seem unreported. This study focused on providing some foundational knowledge about how consumers perceive traditionally harvested crustaceans that are either chemical-treated and or free of chemicals, incorporating price comparisons using a descriptive approach. The study design employed a questionnaire approach via interview using a computer-assisted telephone system and sampled 1,540 participants across five key locations in Italy. To actualize consumer sensitivity, 'price' was the focus given its crucial role as a consumption barrier. Prior to this, variables such as demographic characteristics of participants, frequency of purchasing, quality attributes/factors that limit the consumption of crustaceans were equally considered. By price comparisons, consumers are likely to favor chemical-free (modified atmosphere packaging) crustacean products amid a price increase of up to 15%. But, a further price increase such as by 25% could markedly damage consumers' feelings, which might lead to a considerable number opting out in favor of either chemical-treated or other seafood products. Comparing locations, the studied variables showed no statistical differences ( p >0.05). On the contrary, the response weightings fluctuated across the studied categories. Both response weightings and coefficient of variation helped reveal more about how responses deviated per variable categories. This study has revealed some foundational knowledge about how consumers perceive traditionally harvested crustaceans that were either chemical-treated or subject to chemical-free preservative up to price sensitivity using Italy as a reference case, which is applicable to other parts

  13. Trends in Attendance at Scoliosis Research Society Annual Meetings (SRS AM) and International Meeting on Advanced Spine Techniques (IMAST): Location, Location, Location.

    Science.gov (United States)

    Chen, Foster; Cho, Woojin; Kim, Han Jo; Levine, David B

    2017-07-01

    Descriptive, respective. Although overall membership in Scoliosis Research Society (SRS) has grown over the years, we were curious to see the effects of changing event venue location and timing on conference attendance. Every year, the SRS hosts two major meetings: the Annual Meeting (SRS AM) in the autumn, and the International Meeting on Advanced Spine Techniques (IMAST) in the summer. Sites have alternated from within and outside North America. Often, these meetings have also overlapped with several holidays in certain countries. This was an observational study of attendance from past SRS AM and IMAST meetings. Fourteen years of AM and 8 years of IMAST data were made available from the SRS. Participation based on delegate type and countries were tallied. Details from the 10 most represented nations and host nations per year were also tallied, and their national holidays were reviewed for overlaps with the AM. Membership in AM and IMAST increased from 820 in 2003 to 1,323 in 2016. Attendance at the AM has increased, whereas attendance at IMAST has declined, even after adjusting for membership size. Trends in participation were highly influenced by location. Participation by attendees from the host continent, and especially the host country, is generally high. The negative impact of distant meetings is profoundly seen with North Americans, whereas the positive impact of a nearby meeting was mostly clearly demonstrated by South Americans. Although SRS AM overlapped with holidays in China, Japan, or Korea nearly 50% of the time, this did not influence participation by delegates from these countries. Participation in the AM is highly influenced by location. Although North Americans represented the largest constituency, their presence was not needed to drive total attendance and was not sufficient to turn around the downturn in IMAST attendance. Choice of location can encourage the participation of delegates from the host and neighboring nations; through strategic

  14. Summary engineering description of underwater fuel storage facility for foreign research reactor spent nuclear fuel

    Energy Technology Data Exchange (ETDEWEB)

    Dahlke, H.J.; Johnson, D.A.; Rawlins, J.K.; Searle, D.K.; Wachs, G.W.

    1994-10-01

    This document is a summary description for an Underwater Fuel Storage Facility (UFSF) for foreign research reactor (FRR) spent nuclear fuel (SNF). A FRR SNF environmental Impact Statement (EIS) is being prepared and will include both wet and dry storage facilities as storage alternatives. For the UFSF presented in this document, a specific site is not chosen. This facility can be sited at any one of the five locations under consideration in the EIS. These locations are the Idaho National Engineering Laboratory, Savannah River Site, Hanford, Oak Ridge National Laboratory, and Nevada Test Site. Generic facility environmental impacts and emissions are provided in this report. A baseline fuel element is defined in Section 2.2, and the results of a fission product analysis are presented. Requirements for a storage facility have been researched and are summarized in Section 3. Section 4 describes three facility options: (1) the Centralized-UFSF, which would store the entire fuel element quantity in a single facility at a single location, (2) the Regionalized Large-UFSF, which would store 75% of the fuel element quantity in some region of the country, and (3) the Regionalized Small-UFSF, which would store 25% of the fuel element quantity, with the possibility of a number of these facilities in various regions throughout the country. The operational philosophy is presented in Section 5, and Section 6 contains a description of the equipment. Section 7 defines the utilities required for the facility. Cost estimates are discussed in Section 8, and detailed cost estimates are included. Impacts to worker safety, public safety, and the environment are discussed in Section 9. Accidental releases are presented in Section 10. Standard Environmental Impact Forms are included in Section 11.

  15. Preliminary safety analysis of a PBMR supplying process heat to a co-located ethylene production plant

    International Nuclear Information System (INIS)

    Scarlat, Raluca O.; Cisneros, Anselmo T.; Koutchesfahani, Tawni; Hong, Rada; Peterson, Per F.

    2012-01-01

    This paper considers the safety analysis and licensing approach for co-locating a pebble bed modular reactor (PBMR) to provide process heat to an ethylene production unit. The PBMR is an advanced nuclear reactor design that provides 400 MW of thermal energy. Ethylene production is an energy intensive process that utilizes large gas furnaces to provide the heat for the process. Coupling a PBMR with an ethylene production plant would open a new market for nuclear power, and would provide the chemical industry with a cleaner power source, helping to achieve the Clean Air Act standards, and eliminating the 0.5 ton of CO 2 emissions per ton of produced ethylene. Our analysis uses the Chevron Phillips chemical plant in Sweeney, TX as a prototypical site. The plant has four ethylene production trains, with a total power consumption of 2.4 GW, for an ethylene output of 3.7 million tons per year, 4% of the global ethylene production capacity. This paper proposes replacement of the gas furnaces by low-emission PBMR modules, and presents the safety concerns and risk mitigation and management options for this coupled system. Two coupling design options are proposed, and the necessary changes to the design basis events and severe accidents for the PBMR licensing application are discussed. A joint effort between the chemical and the nuclear entities to optimize the coupling design, establish preventive maintenance procedures, and develop emergency response plans for both of the units is recommended.

  16. Preliminary safety analysis of a PBMR supplying process heat to a co-located ethylene production plant

    Energy Technology Data Exchange (ETDEWEB)

    Scarlat, Raluca O., E-mail: rscarlat@nuc.berkeley.edu [University of California Berkeley, Nuclear Engineering, 4118 Etcheverry Hall, Berkeley, CA 94720 (United States); Cisneros, Anselmo T. [University of California Berkeley, Nuclear Engineering, 4118 Etcheverry Hall, Berkeley, CA 94720 (United States); Koutchesfahani, Tawni [University of California, Chemical and Biomolecular Engineering, 201 Gilman Hall, Berkeley, CA 94720 (United States); Hong, Rada; Peterson, Per F. [University of California Berkeley, Nuclear Engineering, 4118 Etcheverry Hall, Berkeley, CA 94720 (United States)

    2012-10-15

    This paper considers the safety analysis and licensing approach for co-locating a pebble bed modular reactor (PBMR) to provide process heat to an ethylene production unit. The PBMR is an advanced nuclear reactor design that provides 400 MW of thermal energy. Ethylene production is an energy intensive process that utilizes large gas furnaces to provide the heat for the process. Coupling a PBMR with an ethylene production plant would open a new market for nuclear power, and would provide the chemical industry with a cleaner power source, helping to achieve the Clean Air Act standards, and eliminating the 0.5 ton of CO{sub 2} emissions per ton of produced ethylene. Our analysis uses the Chevron Phillips chemical plant in Sweeney, TX as a prototypical site. The plant has four ethylene production trains, with a total power consumption of 2.4 GW, for an ethylene output of 3.7 million tons per year, 4% of the global ethylene production capacity. This paper proposes replacement of the gas furnaces by low-emission PBMR modules, and presents the safety concerns and risk mitigation and management options for this coupled system. Two coupling design options are proposed, and the necessary changes to the design basis events and severe accidents for the PBMR licensing application are discussed. A joint effort between the chemical and the nuclear entities to optimize the coupling design, establish preventive maintenance procedures, and develop emergency response plans for both of the units is recommended.

  17. A Description Of Space Relations In An NLP Model: The ABBYY Compreno Approach

    Directory of Open Access Journals (Sweden)

    Aleksey Leontyev

    2015-12-01

    Full Text Available The current paper is devoted to a formal analysis of the space category and, especially, to questions bound with the presentation of space relations in a formal NLP model. The aim is to demonstrate how linguistic and cognitive problems relating to spatial categorization, definition of spatial entities, and the expression of different locative senses in natural languages can be solved in an artificial intelligence system. We offer a description of the locative groups in the ABBYY Compreno formalism – an integral NLP framework applied for machine translation, semantic search, fact extraction, and other tasks based on the semantic analysis of texts. The model is based on a universal semantic hierarchy of the thesaurus type and includes a description of all possible semantic and syntactic links every word can attach. In this work we define the set of semantic locative relations between words, suggest different tools for their syntactic presentation, give formal restrictions for the word classes that can denote spaces, and show different strategies of dealing with locative prepositions, especially as far as the problem of their machine translation is concerned.

  18. Spatial products available for identifying areas of likely wildfire ignitions using lightning location data-Wildland Fire Assessment System (WFAS)

    Science.gov (United States)

    Paul Sopko; Larry Bradshaw; Matt Jolly

    2016-01-01

    The Wildland Fire Assessment System (WFAS, www.wfas.net) is a one-stop-shop giving wildland fire managers the ability to assess fire potential ranging in scale from national to regional and temporally from 1 to 5 days. Each day, broad-area maps are produced from fire weather station and lightning location networks. Three products are created using 24 hour...

  19. 48 CFR 1910.004-73 - Offer evaluation and award, brand name or equal descriptions.

    Science.gov (United States)

    2010-10-01

    ..., brand name or equal descriptions. 1910.004-73 Section 1910.004-73 Federal Acquisition Regulations System... 1910.004-73 Offer evaluation and award, brand name or equal descriptions. An offer may not be rejected for failure of the offered product to equal a characteristic of a brand name product if it was not...

  20. 29 CFR 2520.102-3 - Contents of summary plan description.

    Science.gov (United States)

    2010-07-01

    ... business of each trustee of the plan; (i) If a plan is maintained pursuant to one or more collective... Examine, without charge, at the plan administrator's office and at other specified locations, such as... 29 Labor 9 2010-07-01 2010-07-01 false Contents of summary plan description. 2520.102-3 Section...

  1. 48 CFR 811.104-70 - Brand name or equal purchase descriptions.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Brand name or equal... Requirements Documents 811.104-70 Brand name or equal purchase descriptions. (a) The specification writer may use purchase descriptions that contain references to one or more brand name products only in...

  2. A Spatial Decision Support System Framework for the Evaluation of Biomass Energy Production Locations: Case Study in the Regional Unit of Drama, Greece

    Directory of Open Access Journals (Sweden)

    Konstantinos Ioannou

    2018-02-01

    Full Text Available Renewable Energy Sources are expected to play a very important role in energy production in the following years. They constitute an energy production methodology which, if properly enabled, can ensure energy sufficiency as well as the protection of the environment. Energy production from biomass in particular is a very common method, which exploits a variety of resources (wood and wood waste, agricultural crops and their by-products after cultivation, animal wastes, Municipal Solid Waste (MSW and food processing wastes for the production of energy. This paper presents a Spatial Decision Support System, which enables managers to locate the most suitable areas for biomass power plant installation. For doing this, fuzzy logic and fuzzy membership functions are used for the creation of criteria layers and suitability maps. In this paper, we use a Multicriteria Decision Analysis methodology (Analytical Hierarchy Process combined with fuzzy system elements for the determination of the weight coefficients of the participating criteria. Then, based on the combination of fuzzy logic and theAnalytic Hierarchy Process (AHP, a final proposal is created thatdivides the area into four categories regarding their suitability forsupporting a biomass energy production power plant. For the two optimal locations, the biomass is also calculated.The framework is applied to theRegional Unit of Drama, which is situated in Northern Greece and is very well known for the area’s forest and agricultural production.

  3. Dynamic Roles and Locations of Manufacturing

    DEFF Research Database (Denmark)

    Slepniov, Dmitrij; Wæhrens, Brian Vejrum; Johansen, John

    2014-01-01

    Purpose – The principal objective of this paper is to relate functional nodes of production and innovation in global operations networks. The authors aim to capture the implications of changing strategic roles and locations of manufacturing for innovation capabilities. Design...... companies presented in this paper, the authors find that although the potential benefits of global dispersion of manufacturing are vast, the realisation of these potentials depends on how successful companies are with linking the new strategic roles and locations of manufacturing with innovation...... of global dispersion of operations. The findings assist global companies in organising cross-functional coordination and interrelated functional nodes of production and innovation in global operations networks. Originality/value – Not only routine transactional tasks but also more knowledge...

  4. Quantitative analytical hierarchy process to marketing store location selection

    OpenAIRE

    Harwati; Utami Intan

    2018-01-01

    The selection of Store to market the product is belong to Multi Criteria Decision Making problem. The criteria used have conflict of interest with each other to produce an optimal location. This research uses four important criteria to select new location of marketing store appropriate with the references: distance to location, competition level with competitor, number of potential customer, and location rent cost. Quantitative data is used to determine the optimum location with AHP method. Q...

  5. Influence of the vibration source location on the modes of jet disintegration in the priller and on monodispersity of the finished product

    OpenAIRE

    Skydanenko, Maksym; Kononenko, Mykola; Kurdes, Yuliia

    2017-01-01

    Influence of the vibration source location on the modes of liquid jets disintegration and obtaining monodisperse droplets and granules of the finished product is theoretically grounded and experimentally confirmed. The experiment was conducted on an experimental stand of industrial granulation equipment.

  6. Prevalence of food production systems in school foodservice.

    Science.gov (United States)

    Brown, Denise M

    2005-08-01

    What is the prevalence of central kitchens that use either cook-chill or cook-freeze production systems in school foodservice settings? A descriptive study using a 5-minute telephone survey during normal working hours was conducted. Questions were designed to be easily answered with minimal need to reference other documentation. Five hundred forty school foodservice directors, managers, and supervisors working in school districts of all sizes across the United States were randomly sampled from a national commercial directory of school districts for the study. A total of 353 individuals completed the survey representing 49 of 50 states. Means, standard deviations, and percentages were evaluated for all data collected. Descriptive statistics of school district characteristics, prevalence of production systems, food transport systems, inventory methods and equipment used for reheating food are reported. The most frequently reported production system was on-site kitchens (45.3%) followed by combination production systems (40.5%) where a central kitchen delivered to a number of satellite locations in addition to schools with on-site food preparation. Central kitchens without additional on-site kitchens represented 14.2% of this study. Of those school districts using either central kitchens or combination production systems, 78% reported hot-food preparation using hot-food delivery to satellites. Cook-chill or cook-freeze production systems were reported by 22% of respondents. The high proportion of school districts that prepared and delivered foods hot to satellite sites supports continuing efforts to identify food safety practices and issues related to maintaining food quality in schools.

  7. An investigation of co-speech gesture production during action description in Parkinson's disease.

    Science.gov (United States)

    Cleary, Rebecca A; Poliakoff, Ellen; Galpin, Adam; Dick, Jeremy P R; Holler, Judith

    2011-12-01

    Parkinson's disease (PD) can impact enormously on speech communication. One aspect of non-verbal behaviour closely tied to speech is co-speech gesture production. In healthy people, co-speech gestures can add significant meaning and emphasis to speech. There is, however, little research into how this important channel of communication is affected in PD. The present study provides a systematic analysis of co-speech gestures which spontaneously accompany the description of actions in a group of PD patients (N = 23, Hoehn and Yahr Stage III or less) and age-matched healthy controls (N = 22). The analysis considers different co-speech gesture types, using established classification schemes from the field of gesture research. The analysis focuses on the rate of these gestures as well as on their qualitative nature. In doing so, the analysis attempts to overcome several methodological shortcomings of research in this area. Contrary to expectation, gesture rate was not significantly affected in our patient group, with relatively mild PD. This indicates that co-speech gestures could compensate for speech problems. However, while gesture rate seems unaffected, the qualitative precision of gestures representing actions was significantly reduced. This study demonstrates the feasibility of carrying out fine-grained, detailed analyses of gestures in PD and offers insights into an as yet neglected facet of communication in patients with PD. Based on the present findings, an important next step is the closer investigation of the qualitative changes in gesture (including different communicative situations) and an analysis of the heterogeneity in co-speech gesture production in PD. Copyright © 2011 Elsevier Ltd. All rights reserved.

  8. A description of the lactic acid bacteria microbiota associated with the production of traditional fermented vegetables in Vietnam.

    Science.gov (United States)

    Nguyen, Doan Thi Lam; Van Hoorde, Koenraad; Cnockaert, Margo; De Brandt, Evie; Aerts, Maarten; Binh Thanh, Le; Vandamme, Peter

    2013-04-15

    An important part of the daily nourishment in Vietnam constitutes of fermented vegetables. Bacteria and especially lactic acid bacteria play a central role in the production of many fermented vegetables. The current study was conducted to investigate the diversity of native lactic acid bacteria (LAB) populations in 'dua muoi' (mustard and beet fermentation) and 'ca muoi' (eggplant fermentation), three types of popular traditional fermented vegetables of Vietnamese origin. To this end a polyphasic approach combining matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) and pheS gene sequence analysis was used. In addition, denaturing gradient gel electrophoresis was performed as a culture-independent method to complement the observed culturable diversity data. A total of 881 LAB isolates were recovered from 21 different samples. Predominant LAB associated with 'dua muoi' and 'ca muoi' were identified as Lactobacillus fermentum (56.6%), Lactobacillus pentosus (24.4%) and Lactobacillus plantarum (17.1%). Less abundant species were Pediococcus pentosaceus (1.0%) and Lactobacillus brevis (0.5%). Species present less than 0.1% included Lactobacillus paracasei, Lactobacillus pantheris and Pediococcus acidilactici. In contrast to fermented mustard and beet with the highest prevalence of L. fermentum, the species most recovered from fermented eggplant samples was L. pentosus. In addition, an important degree of genetic variability within the different predominant species was observed and strain dependency correlating with the type of fermented vegetable or location of production could be demonstrated using multivariate statistics. This research gives an extensive and detailed inventory of the LAB diversity associated with the production of diverse Vietnamese fermented vegetables and demonstrates the influence of type of raw material and/or production location and conditions on this diversity. Copyright © 2013 Elsevier B.V. All rights

  9. A Ricardian model of new trade and location theory

    OpenAIRE

    Ricci, Luca Antonio

    1996-01-01

    This paper provides a new model of firm's location choices. It integrates a Ricardian model of comparative advantage with the location effects deriving from trade costs, increasing returns to scale, product differentiation, and monopolistic competition. In a two-region, two-differentiated-good, one-factor framework, the regional degree of specialization depends positively on the extent of the comparative advantage in productivity and on the degree of returns to scale; it depends negatively on...

  10. Olkiluoto site description 2008. Part 1

    International Nuclear Information System (INIS)

    2009-04-01

    This third version of the Olkiluoto Site Report, produced by the OMTF (Olkiluoto Modelling Task Force), updates the Olkiluoto Site Report 2006 (Andersson et al. 2007) with the data and knowledge obtained up to December 2007. The main product of the modelling has been to develop an updated version of the descriptive model of the site (the Site Descriptive Model), i.e. a model describing the geometry, properties of the bedrock and the water and the associated interacting processes and mechanisms. The Site Descriptive Model is divided into six parts: the surface system, geology, rock mechanics, hydrogeology, hydrogeochemistry and migration, which are presented in individual chapters. Five separated models are presented: the geological, rock mechanics, hydrogeological, hydrogeochemical and migration models. The main advances since Site Report 2006 are: (1) The geological model has been revised according to new data and interpretations. This has improved the consistency between the locations of the deformation zones in the geological model and the hydraulic zones in the hydrogeological model, (2) New 3D seismic data have been incorporated within the geological model and an initial model for the eastern part of the Island is presented. Site-scale brittle deformation zones are extrapolated to intersect the surrounding regional lineaments, unless prohibited by direct observations to the contrary. The alteration model has been revised, showing a clear correspondence between the illitisation and the sitescale fault zones, (3) A first account of the development of the brittle deformation history of the site is provided, (4) A new geological DFN model has been developed, that considers mapped fracture traces from both the surface and the ONKALO, (5) A new stress state model and fracture and fracture zone properties are presented, (6) A new hydrogeological DFN model has been developed, (7) An updated site scale (EPM) flow model has been developed, (8) There has been an

  11. Optimization of production in the oil field through the study of the problem of location of wells and production units; Otimizacao da producao em campo de petroleo pelo estudo do problema de localizacao de pocos e unidades de producao

    Energy Technology Data Exchange (ETDEWEB)

    Santana, Roberta G.S. [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil); Rosa, Vinicius R. [Petroleo Brasileiro S.A. (PETROBRAS), Rio de Janeiro, RJ (Brazil)

    2012-07-01

    This project provides a process for determining the best location of well and production units in an oil field in order to optimize the reservoir performance and the volume of recovered oil, maximizing the profitability. The process uses various statistical analyses presented in the reservoir simulation results, under considerations and parameters. Sensibility analysis and response surface methodology is also applied to a better understanding of how each well influence the total production and the location of the platform and/or manifold can be changed to optimize the production. The method is shown being applied on a field scale with synthetic data. It aims to be a new way of guiding decision-making on a project to develop a field production. (author)

  12. CONSIDERATION OF "VISUAL PRODUCT" AS A NEW PRODUCT EXCEPT FROM ECONOMIC AND GOOD QUALITY IN THE RESPONSIBILITY OF SPORTING PRODUCTS

    OpenAIRE

    Abdurrahman Kepoğlu

    2017-01-01

    As it is known, economical products are divided into two main components (goods/services). The developing technology has restructured its geographical position. The storage capability of sporting products makes it necessary to define the concept of "visual product". In our study, the general scanning model, which is one of the descriptive research methods, is used (Karasar 2009). In the frame of this descriptive scanning method, a theoretical-analytical method has been used focusing on writin...

  13. Water activities in Forsmark. Ecological field inventory and classification of biodiversity values and description of forest production land; Vattenverksamhet i Forsmark. Ekologisk faeltinventering och naturvaerdesklassificering samt beskrivning av skogsproduktionsmark

    Energy Technology Data Exchange (ETDEWEB)

    Hamren, Ulrika; Collinder, Per [Ekologigruppen AB (Sweden)

    2010-12-15

    In 2009, the Swedish Nuclear Fuel and Waste Management Co (SKB) chose Forsmark in the Municipality of Oesthammar as site for the final repository for spent nuclear fuel. This report describes nature values and forestry areas in Forsmark, and provides part of the background material for description of consequences due to groundwater diversion during construction and operation of the repository. The report describes results of map studies and comprehensive field investigations, in terms of geographical delineations, descriptions of characteristics and classifications of nature values for groundwater dependent or groundwater favoured nature objects in Forsmark. The nature objects are located in an investigation area, which contains the area that according to numerical flow modelling could be affected by groundwater-table drawdown due to groundwater diversion

  14. Cold Vacuum Drying Facility Crane and Hoist System Design Description. System 14

    International Nuclear Information System (INIS)

    TRAN, Y.S.

    2000-01-01

    This system design description (SDD) is for the Cold Vacuum Drying (CVD) Facility overhead crane and hoist system. The overhead crane and hoist system is a general service system. It is located in the process bays of the CVD Facility, supports the processes required to drain the water and dry the spent nuclear fuel (SNF) contained in the multi-canister overpacks (MCOs) after they have been removed from the K-Basins. The location of the system in the process bay is shown

  15. Multiple descriptions for packetized predictive control

    DEFF Research Database (Denmark)

    Østergaard, Jan; Quevedo, Daniel

    2016-01-01

    be reliably reconstructed at the plant side. For the particular case of LTI plant models and i.i.d. channels, we show that the overall system forms a Markov jump linear system. We provide conditions for mean square stability and derive upper bounds on the operational bit rate of the quantizer to guarantee......In this paper, we propose to use multiple descriptions (MDs) to achieve a high degree of robustness towards random packet delays and erasures in networked control systems. In particular, we consider the scenario, where a data-rate limited channel is located between the controller and the plant...

  16. Quantitative analytical hierarchy process to marketing store location selection

    Directory of Open Access Journals (Sweden)

    Harwati

    2018-01-01

    Full Text Available The selection of Store to market the product is belong to Multi Criteria Decision Making problem. The criteria used have conflict of interest with each other to produce an optimal location. This research uses four important criteria to select new location of marketing store appropriate with the references: distance to location, competition level with competitor, number of potential customer, and location rent cost. Quantitative data is used to determine the optimum location with AHP method. Quantitative data are preferred to avoid inconsistency when using expert opinion. The AHP result optimum location among three alternatives places.

  17. A framework for product description classification in e-commerce

    NARCIS (Netherlands)

    Vandic, D.; Frasincar, F.; Kaymak, U.

    We propose the Hierarchical Product Classification (HPC) framework for the purpose of classifying products using a hierarchical product taxonomy. The framework uses a classification system with multiple classification nodes, each residing on a different level of the taxonomy. The innovative part of

  18. Descriptive Research

    DEFF Research Database (Denmark)

    Wigram, Anthony Lewis

    2003-01-01

    Descriptive research is described by Lathom-Radocy and Radocy (1995) to include Survey research, ex post facto research, case studies and developmental studies. Descriptive research also includes a review of the literature in order to provide both quantitative and qualitative evidence of the effect...... starts will allow effect size calculations to be made in order to evaluate effect over time. Given the difficulties in undertaking controlled experimental studies in the creative arts therapies, descriptive research methods offer a way of quantifying effect through descriptive statistical analysis...

  19. Decommissioning planning and the assessment of alternatives for the Hanford production reactors

    International Nuclear Information System (INIS)

    Miller, C.E. Jr.; Potter, R.F.

    1985-01-01

    Several years ago, the US Department of Energy began assessing alternatives and planning the decommissioning of eight shut-down plutonium production reactors located on the DOE Hanford Site in Washington State. The first of these graphite-moderated, water-cooled, reactors was built and started up in 1944 as part of the World War II Manhattan Project. The last of them started up in 1955. The eight reactors each operated for 12 to 24 years, with all eight operating simultaneously for about 10 years. In the 1960's, production needs declined and the reactors were one-by-one permanently shut down, the last of them in 1971. (A ninth Hanford production reactor, N Reactor, was started up in 1963; it is still operating and is not within the scope of the decommissioning planning and alternatives assessment work reported in this paper). This paper provides an overview description of the decommissioning plan for the eight shut-down Hanford production reactors and their associated fuel storage basins. Included are descriptions of the decommissioning alternatives considered for the facilities, along with discussions of National Environmental Policy Act (NEPA) process activities applicable to the Hanford decommissioning work. The criteria used in assessing decommissioning alternatives and the assumptions used in the decommissioning planning are identified. 4 refs., 8 figs., 3 tabs

  20. Location, location, location

    NARCIS (Netherlands)

    Anderson, S.P.; Goeree, J.K.; Ramer, R.

    1997-01-01

    We analyze the canonical location-then-price duopoly game with general log- concave consumer densities. A unique pure-strategy equilibrium to the two-stage game exists if the density is not "too asymmetric" and not "too concave." These criteria are satisfied by many commonly used densities.

  1. Preliminary site description Forsmark area - version 1.2

    Energy Technology Data Exchange (ETDEWEB)

    Skagius, Kristina [ed.

    2005-06-01

    The Swedish Nuclear Fuel and Waste Management Company (SKB) is undertaking site characterisation at two different locations, the Forsmark and Simpevarp areas, with the objective of siting a geological repository for spent nuclear fuel. An integrated component in the characterisation work is the development of a site descriptive model that constitutes a description of the site and its regional setting, covering the current state of the geosphere and the biosphere as well as those ongoing natural processes that affect their long-term evolution. The present report documents the site descriptive modelling activities (version 1.2) for the Forsmark area. The overall objectives of the version 1.2 site descriptive modelling are to produce and document an integrated description of the site and its regional environments based on the site-specific data available from the initial site investigations and to give recommendations on continued investigations. The modelling work is based on primary data, i.e. quality-assured, geoscientific and ecological field data available in the SKB databases SICADA and GIS, available July 31, 2004. The work has been conducted by a project group and associated discipline-specific working groups. The members of the project group represent the disciplines of geology, rock mechanics, thermal properties, hydrogeology, hydrogeochemistry, transport properties and surface ecosystems (including overburden, surface hydrogeochemistry and hydrology). In addition, some group members have specific qualifications of importance in this type of project e.g. expertise in RVS (Rock Visualisation System) modelling, GIS-modelling and in statistical data analysis. The overall strategy to achieve a site description is to develop discipline-specific models by interpretation and analyses of the primary data. The different discipline-specific models are then integrated into a site description. Methodologies for developing the discipline-specific models are documented in

  2. Preliminary site description Forsmark area - version 1.2

    International Nuclear Information System (INIS)

    Skagius, Kristina

    2005-06-01

    The Swedish Nuclear Fuel and Waste Management Company (SKB) is undertaking site characterisation at two different locations, the Forsmark and Simpevarp areas, with the objective of siting a geological repository for spent nuclear fuel. An integrated component in the characterisation work is the development of a site descriptive model that constitutes a description of the site and its regional setting, covering the current state of the geosphere and the biosphere as well as those ongoing natural processes that affect their long-term evolution. The present report documents the site descriptive modelling activities (version 1.2) for the Forsmark area. The overall objectives of the version 1.2 site descriptive modelling are to produce and document an integrated description of the site and its regional environments based on the site-specific data available from the initial site investigations and to give recommendations on continued investigations. The modelling work is based on primary data, i.e. quality-assured, geoscientific and ecological field data available in the SKB databases SICADA and GIS, available July 31, 2004. The work has been conducted by a project group and associated discipline-specific working groups. The members of the project group represent the disciplines of geology, rock mechanics, thermal properties, hydrogeology, hydrogeochemistry, transport properties and surface ecosystems (including overburden, surface hydrogeochemistry and hydrology). In addition, some group members have specific qualifications of importance in this type of project e.g. expertise in RVS (Rock Visualisation System) modelling, GIS-modelling and in statistical data analysis. The overall strategy to achieve a site description is to develop discipline-specific models by interpretation and analyses of the primary data. The different discipline-specific models are then integrated into a site description. Methodologies for developing the discipline-specific models are documented in

  3. A not-so-short description of the PERFECT platform

    International Nuclear Information System (INIS)

    Bugat, S.; Zeghadi, A.; Adjanor, G.

    2010-01-01

    This article describes the building of the so-called 'PERFECT platform', which main issue was to allow the development of the PERFECT end-products dedicated to the prediction of the degradation of material properties due to irradiation. First, the general principles used to build the platform are detailed. Such principles guided the choices of preferential development language, architecture, and operating system. The architecture of the platform is then described. It allows an easy development of the end-products, and a 'black-box' integration of the codes developed during the project. Each end-product can be seen as a sequence of modules, each module representing a physical phenomenon in time and space. The platform is very flexible, so that different methodologies can be tested and compared inside an end-product. The second part is devoted to the description of a classical PERFECT study, defined thanks to the graphical user interface developed in the project. Focus is made in particular on how a selection of modules is done, how the input data can be entered, and how the study execution is fully controlled by the user. A final description of the post-processing facilities on the results is exposed.

  4. Graphic Description: The Mystery of Ibn Khafaja\\'s Success in Description

    Directory of Open Access Journals (Sweden)

    جواد رنجبر

    2009-12-01

    Full Text Available Graphic Description:   The Mystery of Ibn Khafaja's Success in Description    Ali Bagher Taheriniya *  Javad Ranjbar **      Abstract Ibn Khafaja is one of the poets and men of letters in Spain. He is titled to Sanobari of Spain. He is one of the masters of description. Hence, the analysis of successful techniques he has used in the descriptive art could illuminate the way for others. Al-Taswir al-harfi (graphic description is a term which denotes the highest and most detailed poems. On this basis, the best descriptive poem is one which is closer to a painting. He has used some elements called conforming elements of description which contain: imagination, feeling, faculty, and dialogue as well as three other elements: to be inborn in description, enchanting nature and convenient life. This article is going to give an analysis of the reasons for Ibn Khafaja’s success in description and portrait making.   Key words: Ibn Khafaja, poetry, description, portrait   * Associate Professor, Bu Ali Sina University of Hamadan E-mail: bTaheriniya@yahoo.com  ** M.A. in Arabic Language and Literature

  5. Employing Picture Description to Assess the Students' Descriptive Paragraph Writing

    Directory of Open Access Journals (Sweden)

    Ida Ayu Mega Cahyani

    2018-03-01

    Full Text Available Writing is considered as an important skill in learning process which is needed to be mastered by the students. However, in teaching learning process at schools or universities, the assessment of writing skill is not becoming the focus of learning process and the assessment is administered inappropriately. In this present study, the researcher undertook the study which dealt with assessing descriptive paragraph writing ability of the students through picture description by employing an ex post facto as the research design. The present study was intended to answer the research problem dealing with the extent of the students’ achievement of descriptive paragraph writing ability which is assessed through picture description. The samples under the study were 40 students determined by means of random sampling technique with lottery system. The data were collected through administering picture description as the research instrument. The obtained data were analyzed by using norm-reference measure of five standard values. The results of the data analysis showed that there were 67.50% samples of the study were successful in writing descriptive paragraph, while there were 32.50% samples were unsuccessful in writing descriptive paragraph which was assessed by administering picture description test

  6. Location and social context does matter when conducting consumer studies!

    DEFF Research Database (Denmark)

    Andersen, Barbara Vad; Kraggerud, Hilde; Bruun Brockhoff, Per

    2015-01-01

    an adequate level of research conducted in realistic eating contexts. In the aim to study how location and social context affected consumers’ feeling of food satisfaction and physical well-being a study was set up with, combined yoghurt with muesli products in two settings; a) in a sensory lab facility (n...... of food satisfaction. Test products were two variants of yoghurt (differing in protein content) and two variants of muesli (a berry and a nut variant) eaten as combined products. An effect of location context (lab- vs. natural context) was found for immediate post intake rating of hunger, fullness...

  7. Descriptive catalogue of radioactive waste families

    International Nuclear Information System (INIS)

    2004-01-01

    This document describes the different types of radioactive wastes produced in France or which are expected to be produced in the future. The wastes have been shared into different families having similar characteristics. A description is made for each family: general presentation, photos, position of the family in the French classification, industrial origin, status of production. Some informations about the raw waste and its conditioning process are also given. The qualitative description is completed by some numerical data like: the quantity produced in the past and to be produced in the future, the evaluation of the radioactivity in 2002 and 2020, and the evaluation of the thermal power when it exists. Finally, some informations are given about the risk of toxicity of some chemical species or compounds. (J.S.)

  8. SOEC pathways for the production of synthetic fuels: The transport case

    Energy Technology Data Exchange (ETDEWEB)

    Ridjan, I.; Vad Mathiesen, B.; Connolly, D. [Aalborg Univ., Aalborg (Denmark)

    2013-08-15

    The focus of this report is analysis of Solid Oxide Electrolyser Cells (SOECs) in the future energy systems. The technical and socio-economic effects of various SOEC application scenarios on the future renewable energy systems are analysed, feasible or ideal locations are identified and recommended, and the competitive strengths and possible weaknesses of the SOEC technology in comparison with other competing technologies are evaluated. This resulted in a detailed overview of technologies involved in the production cycle of synthetic fuels, description of the proposed pathways and the architecture of the system. (Author)

  9. Parametric description of the quantum measurement process

    Science.gov (United States)

    Liuzzo-Scorpo, P.; Cuccoli, A.; Verrucchi, P.

    2015-08-01

    We present a description of the measurement process based on the parametric representation with environmental coherent states. This representation is specifically tailored for studying quantum systems whose environment needs being considered through the quantum-to-classical crossover. Focusing upon projective measures, and exploiting the connection between large-N quantum theories and the classical limit of related ones, we manage to push our description beyond the pre-measurement step. This allows us to show that the outcome production follows from a global-symmetry breaking, entailing the observed system's state reduction, and that the statistical nature of the process is brought about, together with the Born's rule, by the macroscopic character of the measuring apparatus.

  10. Location of an intermediate hub for port activities

    Science.gov (United States)

    Burciu, Ş.; Ştefănică, C.; Roşca, E.; Dragu, V.; Ruscă, F.

    2015-11-01

    An intermediate hub might increase the accessibility level of ports but also hinterland and so it can be considered more than a facility with a transhipment role. These hubs might lead to the development of other transport services and enhance their role in gathering and covering economic centres within hinterlands and also getting the part of logistic facility for the ports, with effects on port utilization and its connectivity to global economy. A new location for a hub terminal leads to reduced transport distances within hinterland, with decreased transport costs and external effects, so with gains in people's life quality. Because the production and distribution systems are relatively fixed on short and medium term and the location decisions are strategic and on long term, the logistic chains activities location models have to consider the uncertainties regarding the possible future situations. In most models, production costs are considered equal, the location problem reducing itself to a problem that aims to minimize the total transport costs, meaning the transport problem. The main objective of the paper is to locate a hub terminal that links the producers of cereals that are going to be exported by naval transportation with the Romanian fluvial-maritime ports (Galaţi, Brăila). GIS environment can be used to integrate and analyse a great amount of data and has the ability of using functions as location - allocation models necessary both to private and public sector, being able to determine the optimal location for services like factories, warehouses, logistic platforms and other public services.

  11. Summer sound-level characterization of the Deaf Smith County and Swisher County locations in the Palo Duro Basin, Texas

    International Nuclear Information System (INIS)

    1984-03-01

    A description of sound levels and sound sources in the Deaf Smith County and Swisher County locations in the Palo Duro Basin during a period representative of the summer season is presented. Included are data collected during the period August 4 through 8, 1982, for both locations. 3 references, 2 figures, 3 tables

  12. 75 FR 5236 - New Postal Product

    Science.gov (United States)

    2010-02-02

    ... Description] Premium Stamped Stationery [Reserved for Product Description] Premium Stamped Cards [Reserved for... determine whether such an agreement (1) Improves the net financial position of the Postal Service or... Descriptions First-Class Mail [Reserved for Class Description] Single-Piece Letters/Postcards [Reserved for...

  13. Location audio simplified capturing your audio and your audience

    CERN Document Server

    Miles, Dean

    2014-01-01

    From the basics of using camera, handheld, lavalier, and shotgun microphones to camera calibration and mixer set-ups, Location Audio Simplified unlocks the secrets to clean and clear broadcast quality audio no matter what challenges you face. Author Dean Miles applies his twenty-plus years of experience as a professional location operator to teach the skills, techniques, tips, and secrets needed to produce high-quality production sound on location. Humorous and thoroughly practical, the book covers a wide array of topics, such as:* location selection* field mixing* boo

  14. Application Protocol, Initial Graphics Exchange Specification (IGES), Layered Electrical Product

    Energy Technology Data Exchange (ETDEWEB)

    O`Connell, L.J. [ed.

    1994-12-01

    An application protocol is an information systems engineering view of a specific product The view represents an agreement on the generic activities needed to design and fabricate the product the agreement on the information needed to support those activities, and the specific constructs of a product data standard for use in transferring some or all of the information required. This application protocol describes the data for electrical and electronic products in terms of a product description standard called the Initial Graphics Exchange Specification (IGES). More specifically, the Layered Electrical Product IGES Application Protocol (AP) specifies the mechanisms for defining and exchanging computer-models and their associated data for those products which have been designed in two dimensional geometry so as to be produced as a series of layers in IGES format The AP defines the appropriateness of the data items for describing the geometry of the various parts of a product (shape and location), the connectivity, and the processing and material characteristics. Excluded is the behavioral requirements which the product was intended to satisfy, except as those requirements have been recorded as design rules or product testing requirements.

  15. Distinguishing Features and Similarities Between Descriptive Phenomenological and Qualitative Description Research.

    Science.gov (United States)

    Willis, Danny G; Sullivan-Bolyai, Susan; Knafl, Kathleen; Cohen, Marlene Z

    2016-09-01

    Scholars who research phenomena of concern to the discipline of nursing are challenged with making wise choices about different qualitative research approaches. Ultimately, they want to choose an approach that is best suited to answer their research questions. Such choices are predicated on having made distinctions between qualitative methodology, methods, and analytic frames. In this article, we distinguish two qualitative research approaches widely used for descriptive studies: descriptive phenomenological and qualitative description. Providing a clear basis that highlights the distinguishing features and similarities between descriptive phenomenological and qualitative description research will help students and researchers make more informed choices in deciding upon the most appropriate methodology in qualitative research. We orient the reader to distinguishing features and similarities associated with each approach and the kinds of research questions descriptive phenomenological and qualitative description research address. © The Author(s) 2016.

  16. Three formulations of the multi-type capacitated facility location problem

    DEFF Research Database (Denmark)

    Klose, Andreas

    The "multi-type" or "modular" capacitated facility location problem is a discrete location model that addresses non-convex piecewise linear production costs as, for instance, staircase cost functions. The literature basically distinguishes three different ways to formulate non-convex piecewise...

  17. The LHCb vertex locator and level-1 trigger

    CERN Document Server

    Dijkstra, H

    2000-01-01

    LHCb will study CP violation and other rare phenomena in B-decays with a forward detector at the LHC. One of the challenges is to design a fast and efficient trigger. The design of the silicon Vertex Locator (VELO) has been driven by the requirements of one of the most selective triggers of the experiment. The VELO trigger is designed to work at an input rate of 1 MHz. The requirements and implementation of the VELO and the associated trigger are summarised, followed by a description of an upgrade which improves the trigger performance significantly. (3 refs).

  18. Technical baseline description for in situ vitrification laboratory test equipment

    International Nuclear Information System (INIS)

    Beard, K.V.; Bonnenberg, R.W.; Watson, L.R.

    1991-09-01

    IN situ vitrification (ISV) has been identified as possible waste treatment technology. ISV was developed by Pacific Northwest Laboratory (PNL), Richland, Washington, as a thermal treatment process to treat contaminated soils in place. The process, which electrically melts and dissolves soils and associated inorganic materials, simultaneously destroys and/or removes organic contaminants while incorporating inorganic contaminants into a stable, glass-like residual product. This Technical Baseline Description has been prepared to provide high level descriptions of the design of the Laboratory Test model, including all design modifications and safety improvements made to data. Furthermore, the Technical Baseline Description provides a basic overview of the interface documents for configuration management, program management interfaces, safety, quality, and security requirements. 8 figs

  19. Production management (1976)

    International Nuclear Information System (INIS)

    Lee, Sun Ryong

    1976-03-01

    This book introduces production management theory, which gives descriptions of production and system, systems approach, development of production management, Taylor system, Ford system, types of production system, measuring ingredients model of production management, decision of production management, selection of production facilities, arrangement of facilities design of work method and task, work measure system, demanding fore casting, production quality system and credibility system.

  20. Biotrans functional and technical description. Report of VIEWLS WP5, modelling studies

    International Nuclear Information System (INIS)

    Van Tilburg, X.; Egging, R.; Londo, H.M.

    2006-01-01

    The overall objectives of this project are to provide structured and clear data on the availability and performance of biofuels and to identify the possibilities and strategies towards large scale sustainable production, use and trading of biofuels for the transport sector in Europe, including Central and Eastern European Countries (CEEC). The report supplements the two other reports in the work package: 'Biofuel and Bio-energy implementation scenarios - final report of VIEWLS WP5' (2005) and 'VIEWLS modelling and analysis, technical data for biofuel production chains' (2005). This document contains a functional and technical description of the BioTrans model, accompanied by a description of the system. Section 2 contains a conceptual and functional description of the biofuel model. Section 3 describes the optimisation method in technical terms, discussing aspects like the target function and constraints used. Finally, section 4 discusses the input and output requirements for the BioTrans system

  1. Neutrino production of single pions: Dipole description

    International Nuclear Information System (INIS)

    Kopeliovich, B. Z.; Schmidt, Ivan; Siddikov, M.

    2011-01-01

    The light-cone distribution amplitudes for the axial current are derived within the instanton vacuum model, which incorporates nonperturbative effects including spontaneous chiral symmetry breaking. This allows one to extend applicability of the dipole approach, usually used in the perturbative domain, down to Q 2 →0, where the partially conserved axial current imposes a relation between the neutrino-production cross section and the one induced by pions. A dramatic breakdown of the Adler relation for diffractive neutrino production of pions, caused by absorptive corrections, was revealed recently by Kopeliovich et al.. Indeed, comparing with the cross section predicted by the dipole phenomenology at Q 2 →0 on a proton target we confirmed the sizable deviation from the value given by the Adler relation, as was estimated by Kopeliovich et al. within a simplified two-channel model. The dipole approach also confirms that in the black-disk limit, where the absorptive corrections maximize, the diffractive cross section ceases, on the contrary to the expectation based on the partially conserved axial current.

  2. Modeling Novo Nordisk Production Systems

    DEFF Research Database (Denmark)

    Miller, Thomas Dedenroth

    1997-01-01

    This report describes attributes of models and systems, and how models can be used for description of production systems. There are special attention on the 'Theory of Domains'.......This report describes attributes of models and systems, and how models can be used for description of production systems. There are special attention on the 'Theory of Domains'....

  3. Design description of the Tangaye Village photovoltaic power system

    Science.gov (United States)

    Martz, J. E.; Ratajczak, A. F.

    1982-01-01

    The engineering design of a stand alone photovoltaic (PV) powered grain mill and water pump for the village of Tangaye, Upper Volta is described. The socioeconomic effects of reducing the time required by women in rural areas for drawing water and grinding grain were studied. The suitability of photovoltaic technology for use in rural areas by people of limited technical training was demonstrated. The PV system consists of a 1.8-kW (peak) solar cell array, 540 ampere hours of battery storage, instrumentation, automatic controls, and a data collection and storage system. The PV system is situated near an improved village well and supplies d.c. power to a grain mill and a water pump. The array is located in a fenced area and the mill, battery, instruments, controls, and data system are in a mill building. A water storage tank is located near the well. The system employs automatic controls which provide battery charge regulation and system over and under voltage protection. This report includes descriptions of the engineering design of the system and of the load that it serves; a discussion of PV array and battery sizing methodology; descriptions of the mechanical and electrical designs including the array, battery, controls, and instrumentation; and a discussion of the safety features. The system became operational on March 1, 1979.

  4. Weaner production with low antimicrobial usage: a descriptive study

    DEFF Research Database (Denmark)

    Fertner, Mette Ely; Boklund, Anette; Dupont, Nana Hee

    2015-01-01

    Background: Health, productivity and antimicrobial use in the production of pigs are expected to be interrelated to some extent. Previous studies on register-based data have investigated these correlations with a subsequent large variation residing at the farm level. In order to study such farm f...

  5. Olkiluoto site description 2006

    International Nuclear Information System (INIS)

    Andersson, J.; Ahokas, H.; Hudson, J.A.

    2007-03-01

    This second version of the Olkiluoto Site Report, produced by the OMTF (Olkiluoto Modelling Task Force), updates the Olkiluoto Site Report 2004 (Posiva 2005) with the data and knowledge obtained up to December 2005. The main product of the modelling has been to develop a descriptive model of the site (the Site Descriptive Model), i.e. a model describing the geometry, properties of the bedrock and the water and the associated interacting processes and mechanisms. For practical reasons, the Site Descriptive Model is divided into five parts: surface system, geology, rock mechanics, hydrogeology and hydrogeochemistry, which are presented in individual chapters. Four separated models are presented: the geological, rock mechanics, hydrogeological and hydrogeochemical models. The consistency between the hydrogeological and hydrogeochemical models is assessed in a joint chapter. Chapter 1 presents an outline of the report, explains the background to its development and sets out its objectives and scope. It is also introduces and explains the integrated modelling methodology, the nomenclature used in the descriptions of the models and the prediction/outcome studies. Chapter 2 provides a brief overview of the data used for producing the Site Description. Chapters 3 to 8 present the descriptive modelling, which involves interpreting data, interpolating or extrapolating between measurement points and calibrating the model against data, based on the various assumptions made about each conceptual model. Chapter 9 presents the results of the prediction/outcome studies performed during 2005 and Chapter 10 the overall consistency and confidence assessment. Overall conclusions are provided in Chapter 11. The main advances since Site Report 2004 are: A new geological model is presented in Chapter 4, representing a significant change from Bedrock Model 2003/1. There has been extensive use of geological data, whereas hydrogeological data have deliberately not been used and more

  6. Primary Numbers Database for ATLAS Detector Description Parameters

    CERN Document Server

    Vaniachine, A; Malon, D; Nevski, P; Wenaus, T

    2003-01-01

    We present the design and the status of the database for detector description parameters in ATLAS experiment. The ATLAS Primary Numbers are the parameters defining the detector geometry and digitization in simulations, as well as certain reconstruction parameters. Since the detailed ATLAS detector description needs more than 10,000 such parameters, a preferred solution is to have a single verified source for all these data. The database stores the data dictionary for each parameter collection object, providing schema evolution support for object-based retrieval of parameters. The same Primary Numbers are served to many different clients accessing the database: the ATLAS software framework Athena, the Geant3 heritage framework Atlsim, the Geant4 developers framework FADS/Goofy, the generator of XML output for detector description, and several end-user clients for interactive data navigation, including web-based browsers and ROOT. The choice of the MySQL database product for the implementation provides addition...

  7. Description of Latvian Metal Production and Processing Enterprises' Air Emissions

    OpenAIRE

    Pubule, J; Zahare, D; Blumberga, D

    2010-01-01

    The metal production and processing sector in Latvia has acquired a stable position in the national economy. Smelting of ferrous and nonferrous metals, production of metalware, galvanisation, etc. are developed in Latvia. The metal production and processing sector has an impact on air quality due to polluting substances which are released in the air from metal treatment processes. Therefore it is necessary to determine the total volume of emissions produced by the metal production and process...

  8. Educational debt: does it have an influence on initial job location and specialty choice?

    Science.gov (United States)

    Snyder, Jennifer; Nehrenz, Guy; Danielsen, Randy; Pedersen, Donald

    2014-01-01

    This study applied a quantitative design and analyzed the impact of educational debt on initial specialty and location choices for physician assistant (PA) graduates in Indiana. PAs who graduated between January 1, 2000, and December 31, 2010, and actively practice in Indiana were surveyed. Descriptive statistics and chi-square analyses were performed to determine whether any significant relationships existed among practice specialty, location, and gender. 157 participants (33%) responded to the survey and were considered in the final analysis. Males were more likely than females to be influenced by debt in choosing their specialty and the location of their initial job. A majority of PAs would have reconsidered rural practice if they had received federal and or state loan forgiveness for educational debt. This study provides evidence that debt may influence practice specialty and location choice. Further studies are needed to determine how gender might account for decisions to practice in certain specialties and location.

  9. Synthesis of Zn-Cu-Cd sulfide nanospheres with controlled copper locations and their effects on photocatalytic activities for H{sub 2} production

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Yabo; Xu, Rong [School of Chemical and Biomedical Engineering, Nanyang Technological University, 62 Nanyang Drive, Singapore 637459 (Singapore); Wang, Yongsheng [School of Mechanical and Aerospace Engineering, Nanyang Technological University, 50 Nanyang Avenue, Singapore 639798 (Singapore)

    2010-06-15

    In this work, a two-step solvothermal method was used to synthesize Zn-Cu-Cd sulfide nanospheres with controlled copper locations. The structural and other physical properties of the nanospheres were investigated by XRD, FESEM, TEM, energy-filtered TEM, XPS, ICP and UV-vis DRS methods. By varying the addition of the copper precursor during the two synthesis steps, Zn-Cu-Cd sulfide nanospheres with three distinctive copper distribution patterns can be obtained with copper (i) only in the core, (ii) only on the surface shell, and (iii) both in the core and on the surface shell. The influence of the location and concentration of copper on the photocatalytic activity for hydrogen production from water under visible light was investigated. It was found that the activity of the sample with copper only on the surface shell is about two times of that with copper only in the core. The highest hydrogen production rate was obtained on the nanosphere sample with copper both in the core and on the surface shell. The possible mechanism was discussed. The findings from this study are important for the development of efficient photocatalysts based on ternary or multinary systems. (author)

  10. Location, Location, Location: Does Place Provide the Opportunity for Differentiation for Universities?

    Science.gov (United States)

    Winter, Emma; Thompson-Whiteside, Helen

    2017-01-01

    The fiercely competitive HE market has led HEIs to invest significant resources in building a distinct identity. An HEI's location forms an inherent part of its identity and the uniqueness of location offers an opportunity to differentiate. However there has been limited examination of how location is used by HEIs and little consideration of how…

  11. Influences of geo-spatial location on pre-exposure prophylaxis use in South Africa: positioning microbicides for better product uptake.

    Science.gov (United States)

    Govender, Eliza M; Mansoor, Leila E; Abdool Karim, Quarraisha

    2017-06-01

    Young women bear a disproportionately high burden of HIV infection in sub-Saharan Africa, prioritising pre-exposure prophylaxis (PrEP) can be an integral part of HIV prevention combination strategies. Women initiated HIV prevention technology options will require consistent adherence, an imperative for product effectiveness. With several PrEP clinical trials underway; exploring women's acceptability to advances in HIV prevention technologies can better facilitate demand creation for future PrEP roll out. This study utilised the opportunity of post-trial access to CAPRISA 008 women (trial) and non-trial women from three geo-spatial settings (urban, rural and peri-urban) to identify microbicide acceptability and how product associations of microbicides can influence future HIV prevention choices. Six participatory workshops using participatory action research with art-based activities and discussion groups were conducted in KwaZulu-Natal with 104 women from various geo-spatial locations and social status to understand microbicide acceptability and product associations. The data were analysed using thematic analysis. The study found that women's acceptability and product association of the tenofovir gel microbicide differed according to rural and urban areas. Most urban women identified confidence, sexiness and classiness as key associations that will encourage microbicide acceptability and use, while rural women identified respect, responsibility and confidence as the key product associations, with increased focus on the individual and collective family/community benefits of product acceptance and use. Urban-rural differences suggest a market segmentation that is contextualised to be locally responsive to promote HIV prevention technologies. Various sexual encounters further determined the types of HIV prevention technologies women would consider. In line with WHO's recommendation that PrEP should be an additional prevention choice for people at risk of HIV, this

  12. 75 FR 41895 - Inteva Products, LLC Adrian, Michigan; Inteva Products, LLC Troy, Michigan; Amended Certification...

    Science.gov (United States)

    2010-07-19

    ... Products, LLC Adrian, Michigan; Inteva Products, LLC Troy, Michigan; Amended Certification Regarding... time period at the Troy, Michigan location of Inteva Products, LLC. The Troy, Michigan location.... Accordingly, the Department is amending the certification to include workers of the Troy, Michigan location of...

  13. YUCCA MOUNTAIN SITE DESCRIPTION

    International Nuclear Information System (INIS)

    Simmons, A.M.

    2004-01-01

    The ''Yucca Mountain Site Description'' summarizes, in a single document, the current state of knowledge and understanding of the natural system at Yucca Mountain. It describes the geology; geochemistry; past, present, and projected future climate; regional hydrologic system; and flow and transport within the unsaturated and saturated zones at the site. In addition, it discusses factors affecting radionuclide transport, the effect of thermal loading on the natural system, and tectonic hazards. The ''Yucca Mountain Site Description'' is broad in nature. It summarizes investigations carried out as part of the Yucca Mountain Project since 1988, but it also includes work done at the site in earlier years, as well as studies performed by others. The document has been prepared under the Office of Civilian Radioactive Waste Management quality assurance program for the Yucca Mountain Project. Yucca Mountain is located in Nye County in southern Nevada. The site lies in the north-central part of the Basin and Range physiographic province, within the northernmost subprovince commonly referred to as the Great Basin. The basin and range physiography reflects the extensional tectonic regime that has affected the region during the middle and late Cenozoic Era. Yucca Mountain was initially selected for characterization, in part, because of its thick unsaturated zone, its arid to semiarid climate, and the existence of a rock type that would support excavation of stable openings. In 1987, the United States Congress directed that Yucca Mountain be the only site characterized to evaluate its suitability for development of a geologic repository for high-level radioactive waste and spent nuclear fuel

  14. Managing and mitigating extensive subsurface fuel product beneath two inner-city heritage buildings

    Energy Technology Data Exchange (ETDEWEB)

    Friedrich, K. [City of Edmonton, AB (Canada); Morton, P.R. [EBA Engineering Consultants Ltd., Edmonton, AB (Canada)

    2006-07-01

    The management and mitigation of extensive subsurface fuel product beneath two inner-city heritage buildings in Edmonton, Alberta was examined. The presentation was organized under four components: description and planning; scope and risk; design; and implementation. The description and planning section identified the location, buildings, stakeholders, and integration with other activities. The section on scope and risk addressed issues regarding hydrocarbon impacts, remediation ranking (vertical and inclined wells and horizontal wells), remediation modes, and field trials. The section on design identified the remediation components including extraction wells; liquids separation and collection; water treatment; off-gas catalytic oxidation; sensor data acquisition and PLCS system; satellite link for web monitoring and control, and secure and noise-reducing enclosure. Implementation issues were also discussed with reference to horizontal directional drilling and well construction, difficulties and problems, commissioning, remediation progress to-date, and community benefits. tabs., figs.

  15. Industry of petroleum and its by-products

    International Nuclear Information System (INIS)

    Haddad, Antoine

    1989-01-01

    A comprehensive study of petroleum industry and its by-products is presented. Petroleum, since its origin and all steps of its industry including its detection, production and transportation is described. A historical description of the production and formation of fuels under the ground strates through million of years, as well as its chemical composition are presented. A full description of refining petrol and all by-products derived is given. Pictures and tables enhance the explanation

  16. Winter sound-level characterization of the Deaf Smith County location in the Palo Duro Basin, Texas

    International Nuclear Information System (INIS)

    1984-03-01

    A description of sound levels and sound sources in the Deaf Smith County location in the Palo Duro Basin during a period representative of the winter season is presented. Data were collected during the period February 26 through March 1, 1983. 4 references, 1 figure, 3 tables

  17. Descriptive sensory evaluations

    DEFF Research Database (Denmark)

    Dehlholm, Christian

    A recent trend in descriptive sensory evaluation methodology has been the application of rapid evaluation techniques. The ease in use makes the techniques extremely easy to implement by industry and university environments. Thus, one might not consider validity in the choice of method. The overall...... aim of this thesis is to compare and evaluate selected rapid evaluation techniques for sensory profiling. Method variations have been suggested for evaluations in product development and quality control, and method insight is provided. The thesis includes three original studies, designed...... as a consequence of the current practices and needs faced in the industry. Study I compared applicability and validity of rapid methods across several panels of trained assessors. Two rapid approaches were introduced for the evaluation of foods. The first method, ‘Free Multiple Sorting’, allows subjects to perform...

  18. Layered Electrical Product Application Protocol (AP). Draft: Initial Graphics Exchange Specification (IGES)

    Energy Technology Data Exchange (ETDEWEB)

    1994-09-01

    An application protocol is an information systems engineering view of a specific product. The view represents an agreement on the generic activities needed to design and fabricate the product, the agreement on the information needed to support those activities, and the specific constructs of a product data standard for use in transfering some or all of the information required. This applications protocol describes the data for electrical and electronic products in terms of a product description standard called the Initial Graphics Exchange Specification (IGES). More specifically, the Layered Electrical Product IGES Application Protocol (AP) specifies the mechanisms for defining and exchanging computer-models and their associated data for those products which have been designed in two dimensional geometry so as to be produced as a series of layers in IGES format. The AP defines the appropriateness of the data items for describing the geometry of the various parts of a product (shape and location), the connectivity, and the processing and material characteristics. Excluded is the behavioral requirements which the product was intended to satisfy, except as those requirements have been recorded as design rules or product testing requirements.

  19. National waste terminal storage conceptual reference repository description

    International Nuclear Information System (INIS)

    Odgers, I.L.; Collings, J.L.

    1981-01-01

    The conceptual reference repository description (CRRD) discusses, from a conceptual engineering standpoint, the structures, systems, equipment, and operations necessary to: (1) receive unreprocessed spent fuel assemblies in standard casks; (2) unload these assemblies; (3) place them in canisters; (4) transport the canisters to underground storage locations in the salt dome; and (5) place the canisters in terminal storage. The CRRD also elaborates on the concepts for retrieval and recovery of the spent fuel after burial and describes the development of the shafts and the underground areas, as well as the supporting operational utility and administrative features of the repository

  20. Weaner production with low antimicrobial usage: a descriptive study

    DEFF Research Database (Denmark)

    Fertner, Mette Ely; Boklund, Anette; Dupont, Nana Hee

    2015-01-01

    Background: Health, productivity and antimicrobial use in the production of pigs are expected to be interrelated to some extent. Previous studies on register-based data have investigated these correlations with a subsequent large variation residing at the farm level. In order to study such farm...... factors in more detail we designed an elaborate interview-guide. By in-depth interviews of farmers with well-managed 7-30 kg (weaner) productions we sought to describe a set of common key-factors characterizing their management practices. Identification of such common practices could be used in follow......-up projects, investigating whether identified factors really are characteristic for good-practicing famers.Results: Eleven farms were selected for a farm visit and in-depth interview. Participating farms used less antimicrobials than the national median (8.2 animal daily doses/100 weaners/day), had...

  1. Quantitative imaging analysis of posterior fossa ependymoma location in children.

    Science.gov (United States)

    Sabin, Noah D; Merchant, Thomas E; Li, Xingyu; Li, Yimei; Klimo, Paul; Boop, Frederick A; Ellison, David W; Ogg, Robert J

    2016-08-01

    Imaging descriptions of posterior fossa ependymoma in children have focused on magnetic resonance imaging (MRI) signal and local anatomic relationships with imaging location only recently used to classify these neoplasms. We developed a quantitative method for analyzing the location of ependymoma in the posterior fossa, tested its effectiveness in distinguishing groups of tumors, and examined potential associations of distinct tumor groups with treatment and prognostic factors. Pre-operative MRI examinations of the brain for 38 children with histopathologically proven posterior fossa ependymoma were analyzed. Tumor margin contours and anatomic landmarks were manually marked and used to calculate the centroid of each tumor. Landmarks were used to calculate a transformation to align, scale, and rotate each patient's image coordinates to a common coordinate space. Hierarchical cluster analysis of the location and morphological variables was performed to detect multivariate patterns in tumor characteristics. The ependymomas were also characterized as "central" or "lateral" based on published radiological criteria. Therapeutic details and demographic, recurrence, and survival information were obtained from medical records and analyzed with the tumor location and morphology to identify prognostic tumor characteristics. Cluster analysis yielded two distinct tumor groups based on centroid location The cluster groups were associated with differences in PFS (p = .044), "central" vs. "lateral" radiological designation (p = .035), and marginally associated with multiple operative interventions (p = .064). Posterior fossa ependymoma can be objectively classified based on quantitative analysis of tumor location, and these classifications are associated with prognostic and treatment factors.

  2. Discourse Factors Influencing Spatial Descriptions in English and German

    Science.gov (United States)

    Vorwerg, Constanze; Tenbrink, Thora

    The ways in which objects are referred to by using spatial language depend on many factors, including the spatial configuration and the discourse context. We present the results of a web experiment in which speakers were asked to either describe where a specified item was located in a picture containing several items, or which item was specified. Furthermore, conditions differed as to whether the first six configurations were specifically simple or specifically complex. Results show that speakers' spatial descriptions are more detailed if the question is where rather than which, mirroring the fact that contrasting the target item from the others in which tasks may not always require an equally detailed spatial description as in where tasks. Furthermore, speakers are influenced by the complexity of initial configurations in intricate ways: on the one hand, individual speakers tend to self-align with respect to their earlier linguistic strategies; however, also a contrast effect could be identified with respect to the usage of combined projective terms.

  3. Effective-gluon model description of inclusive meson production in π+- p and pp collisions

    International Nuclear Information System (INIS)

    Look, G.W.; Fischbach, E.

    1977-01-01

    The recently introduced effective-gluon (EG) model is applied to inclusive meson production at large transverse momentum (p/sub t)/from π +- p and pp interactions. In the EG model the dependence of the inclusive differential cross section on p/ sub t/ and center-of-momentum energy √s is characterized by a single universal constant B = 18 GeV 2 ; this constant is obtained by fitting to the inclusive data for pp → cX with c = π +- π 0 , K +- p, and p-bar. Since the EG model requires that the inclusive differential cross sections for π +- p → X/should be characterized by the same constant B, the dependence of these cross sections on p/sub t/and √s should follow from the previous analysis of pp → cX without the introduction of any additional parameters. The only new information required is the form of the momentum distribution function for partons in the incident pion. Several models for this function are considered and it it shown that all of the alternatives lead to approximately the same predictions. Comparison of theory and experiment indicates that the EG model description of the recent Fermilab data of Donaldson et al. is good to approximately 15--20 % per data point over a range of more than 10 5 in the magnitude of the inclusive cross section

  4. Neighbourhood Acceptability of Poultry Farms Located in ...

    African Journals Online (AJOL)

    ... due to poultry production in their neighbourhood. It was recommended that farmers should be encouraged to adopt technologies that can keep poultry litters dry and odourless. In addition, poultry farm locations should be sited far away from residential areas. Keywords: Poultry Farms, Acceptability, Waste management, ...

  5. Recommender systems for location-based social networks

    CERN Document Server

    Symeonidis, Panagiotis; Manolopoulos, Yannis

    2014-01-01

    Online social networks collect information from users' social contacts and their daily interactions (co-tagging of photos, co-rating of products etc.) to provide them with recommendations of new products or friends. Lately, technological progressions in mobile devices (i.e. smart phones) enabled the incorporation of geo-location data in the traditional web-based online social networks, bringing the new era of Social and Mobile Web. The goal of this book is to bring together important research in a new family of recommender systems aimed at serving Location-based Social Networks (LBSNs). The chapters introduce a wide variety of recent approaches, from the most basic to the state-of-the-art, for providing recommendations in LBSNs. The book is organized into three parts. Part 1 provides introductory material on recommender systems, online social networks and LBSNs. Part 2 presents a wide variety of recommendation algorithms, ranging from basic to cutting edge, as well as a comparison of the characteristics of t...

  6. Location of Osteochondritis Dissecans Lesions of the Capitellum.

    Science.gov (United States)

    Johnson, Christine C; Roberts, Susanne; Mintz, Douglas; Fabricant, Peter D; Hotchkiss, Robert N; Daluiski, Aaron

    2018-04-17

    The location of capitellar osteochondritis dissecans (OCD) lesions in the sagittal plane guides the surgical approach, and lesion location in the coronal plane influences surgical management. Although most lesions have been reported to occur between 4 o'clock and 4:30 (120° to 135° anterior to the humerus), some lesions are located elsewhere in the capitellum. The primary aim was to define the region of the capitellum affected by OCD lesions using a novel clock-face localization system. We reviewed 104 magnetic resonance imaging examinations diagnosing a nontraumatic capitellar OCD lesion. In the sagittal plane, lesion margins were recorded as degrees on the capitellum and converted into a clock-face format in which 0° corresponds to 12:00 with the forearm facing to the right. The 0° axis (12-o'clock axis) was defined as a line parallel to the anterior humeral line that intersects the capitellum center. The following coronal measurements were recorded: lesion width, capitellar width, and distance between the lateral capitellum and lateral lesion. Two independent observers took measurements. In the sagittal plane, average lesion location was 92° to 150° (3:04-5:00, clock face) and ranged from 52.1° to 249.5° (1:44-8:19, clock face). Average lesion dimensions were 10.7 mm (mediolateral width) and 5.2 mm (anteroposterior depth). Interrater reliability was high (intraclass correlation coefficient = 0.98). Using a magnetic resonance imaging-based clock-face localization system, we found that capitellar OCD lesions affect a broad region of the capitellum in the sagittal plane. The clock-face localization system allows for precise description of capitellar OCD lesion location, which may facilitate intraoperative decision and longitudinal monitoring. Copyright © 2018 American Society for Surgery of the Hand. Published by Elsevier Inc. All rights reserved.

  7. Intended location of future career practice among graduating medical students: perspective from social cognitive career theory in Nepal.

    Science.gov (United States)

    Sapkota, B P; Amatya, A

    2013-09-01

    Medical workforce shortages and mal-distributions world-wide make understanding how, where and what our future doctors wish to practice is increasingly important. Understanding of factors such as available infrastructure, provision of incentives and many others influences the decisions of doctors to leave or to stay. Therefore the strategies effective for retention, is imperative in conducting the study based on a sound theoretical framework in predicting future medical workforce needs. The study used the theoretical framework of Social Cognitive Career Theory to identify the predictors on future practice location. The study was cross-sectional descriptive in design targeting the Nepalese medical students in the final year and doing internships in Nepal. Anonymous self administered questionnaire was distributed among 480 students but 393 students were involved due to non response and incompleteness. Findings of the study were presented in frequency tables for univariate descriptive analysis and bivariate findings were presented by cross tabulation. About two thirds 259 (65.9%) of the participants had chosen within country location for future practice. Among those who had chosen within country choice, about an equal percentage of the respondents had chosen rural 131 (50.8%) and urban 128 (49.2%) location. Among those who had chosen within country for future practice location, less than one fifth of the participants had chosen private sector for future practice. Majority of the medical graduates wish to practice within country location. Most of which chose public sector for future practice. None of the SCCT construct had any significant association within country location.

  8. Agglomeration, accessibility and industrial location: evidence from spanish municipalities

    OpenAIRE

    Alañón Pardo, Ángel; Arauzo Carod, Josep María

    2011-01-01

    This paper deals with the location decisions of manufacturing firms in Spain. We analyse how agglomeration economies and transport accessibility influence the location decisions of firms at municipality level and in three industries. The main empirical contributions of this paper are the econometric techniques used (spatial econometric models) and some of the explanatory variables (local gross domestic product, road accessibility, and the characteristics of firms in neighbouring municipalitie...

  9. Pomegranate production and marketing

    Science.gov (United States)

    This book is relatively short, with 134 pages, 15 chapters, 52 figures, and 20 tables. It ranges from cultivar descriptions, production, biotic and abiotic challenges to production, to postharvest, aril and juice production, health benefits, and international trade. It contains great information and...

  10. Life cycle water demand coefficients for crude oil production from five North American locations.

    Science.gov (United States)

    Ali, Babkir; Kumar, Amit

    2017-10-15

    The production of liquid fuels from crude oil requires water. There has been limited focus on the assessment of life cycle water demand footprints for crude oil production and refining. The overall aim of this paper is address this gap. The objective of this research is to develop water demand coefficients over the life cycle of fuels produced from crude oil pathways. Five crude oil fields were selected in the three North American countries to reflect the impact of different spatial locations and technologies on water demand. These include the Alaska North Slope, California's Kern County heavy oil, and Mars in the U.S.; Maya in Mexico; and Bow River heavy oil in Alberta, Canada. A boundary for an assessment of the life cycle water footprint was set to cover the unit operations related to exploration, drilling, extraction, and refining. The recovery technology used to extract crude oil is one of the key determining factors for water demand. The amount of produced water that is re-injected to recover the oil is essential in determining the amount of fresh water that will be required. During the complete life cycle of one barrel of conventional crude oil, 1.71-8.25 barrels of fresh water are consumed and 2.4-9.51 barrels of fresh water are withdrawn. The lowest coefficients are for Bow River heavy oil and the highest coefficients are for Maya crude oil. Of all the unit operations, exploration and drilling require the least fresh water (less than 0.015 barrel of water per barrel of oil produced). A sensitivity analysis was conducted and uncertainty in the estimates was determined. Copyright © 2017 Elsevier Ltd. All rights reserved.

  11. Location decision strategies for improving SMME business performance

    Directory of Open Access Journals (Sweden)

    Shereen Barnard

    2011-12-01

    Full Text Available Purpose: The primary objective of this study is to investigate the macro-environmental factors that may influence location decisions and how these choices may affect the business performance of SMMEs. Problem investigated: SMMEs in South Africa play an increasingly important role in stimulating economic activity, growth and employment creation. However, many SMMEs cease to exist within the first five years of operation due to various challenges faced by SMMEs on a daily basis. Many SMMEs owners disregard the importance of location, yet the geographical location can negatively influence the survival of the business. Several factors influence the choice of the location, which will ultimately have either a positive or negative effect on business performance. Methodology: A positivistic research methodology was adopted for this study. Seven hypotheses were constructed to achieve the primary objective of this study. The population for this study consisted of SMMEs in the Nelson Mandela Metropole from which a convenience sample of 175 SMMEs was selected. The measuring instrument, a self-developed questionnaire, consisted of three sections. The data collected included the demographical data of the respondents and their businesses, statements on location and various factors influencing location decisions as well as measurements of business performance. Cronbach Alpha coefficients were calculated to determine the reliability of the questionnaire items. Data analysis was done by calculating descriptive statistics, Pearson correlation coefficients and conducting a simple linear regression analysis. Cohen's d was used to determine the significance of between-factor differences. Findings and implications: The results of the study showed that positive relationships existed between all the independent variables (location, rental rates, employment, inflation, interest rates and green buildings and the dependent variable (business performance except for the

  12. 16 CFR Figure 3 to Part 1203 - Location of Reference Plane

    Science.gov (United States)

    2010-01-01

    ... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Location of Reference Plane 3 Figure 3 to Part 1203 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT... Plane ER10MR98.003 ...

  13. Observing Participating Observation—A Re-description Based on Systems Theory

    Directory of Open Access Journals (Sweden)

    Tina Bering Keiding

    2010-09-01

    Full Text Available Current methodology concerning participating observation in general leaves the act of observation unobserved. Approaching participating observation from systems theory offers fundamental new insights into the topic. Observation is always participation. There is no way to escape becoming a participant and, as such, co-producer of the observed phenomenon. There is no such thing as a neutral or objective description. As observation deals with differences and process meaning, all descriptions are re-constructions and interpretations of the observed. Hence, the idea of neutral descriptions as well as the idea of the naïve observer becomes a void. Not recognizing and observing oneself as observer and co-producer of empirical data simply leaves the process of observation as the major unobserved absorber of contingency in data production based on participating observation. URN: urn:nbn:de:0114-fqs1003119

  14. Simulation framework and XML detector description for the CMS experiment

    CERN Document Server

    Arce, P; Boccali, T; Case, M; de Roeck, A; Lara, V; Liendl, M; Nikitenko, A N; Schröder, M; Strässner, A; Wellisch, H P; Wenzel, H

    2003-01-01

    Currently CMS event simulation is based on GEANT3 while the detector description is built from different sources for simulation and reconstruction. A new simulation framework based on GEANT4 is under development. A full description of the detector is available, and the tuning of the GEANT4 performance and the checking of the ability of the physics processes to describe the detector response is ongoing. Its integration on the CMS mass production system and GRID is also currently under development. The Detector Description Database project aims at providing a common source of information for Simulation, Reconstruction, Analysis, and Visualisation, while allowing for different representations as well as specific information for each application. A functional prototype, based on XML, is already released. Also examples of the integration of DDD in the GEANT4 simulation and in the reconstruction applications are provided.

  15. Human population and activities at Simpevarp. Site description

    Energy Technology Data Exchange (ETDEWEB)

    Miliander, Sofia; Punakivi, Mari; Kylaekorpi, Lasse; Rydgren, Bernt [SwedPower AB, Stockholm (Sweden)

    2004-12-01

    The Swedish Nuclear Fuel and Waste Management Co (SKB) is in the process of selecting a safe and environmentally acceptable location for a deep repository of radioactive waste. Two alternative locations are under investigation. These are Forsmark, Oesthammars kommun (kommun = municipality) and Simpevarp/Laxemar, Oskarshamns kommun. SKB has expressed the importance of describing the humans and their activities in these areas and therefore has this synthesis concerning the human population in Forsmark been produced. The description is a statistical synthesis, mainly based upon statistical data from SCB (Statistics Sweden) that has been collected, processed and analysed. The statistical data has not been verified through site inspections and interviews. When using statistical data, it is advisable to note that the data becomes more unreliable if the areas are small, with small populations. The data in this description is essential for future evaluations of the impact on the environment and its human population (environmental impacts assessments). The data is also important when modelling the potential flows of radio nuclides and calculating the risk of exposure in future safety assessments. The actual area for the study is in this report called 'the Simpevarp area', an area of 127.0 km{sup 2} near Oskarshamn nuclear power plant. The land use in Simpevarp area differs notably from the land use in Kalmar laen. The forest area is far more dominating in Simpevarp area than in Kalmar laen and it represents as much as 89% compared to 63% of the total area. Only 4.4% of the area is arable land compared to 11.6% in Kalmar laen and only 0.3% is of other type (wetlands, bare rock, quarries, pites etc) compared to 15.6% in the county. The main observation is that Simpevarp area is a sparsely populated area located in a relatively lightly populated county. In 2002, the population density was 7.4 inhabitants/km{sup 2}, three times lower than in Kalmar laen. The

  16. Human population and activities at Simpevarp. Site description

    International Nuclear Information System (INIS)

    Miliander, Sofia; Punakivi, Mari; Kylaekorpi, Lasse; Rydgren, Bernt

    2004-12-01

    The Swedish Nuclear Fuel and Waste Management Co (SKB) is in the process of selecting a safe and environmentally acceptable location for a deep repository of radioactive waste. Two alternative locations are under investigation. These are Forsmark, Oesthammars kommun (kommun = municipality) and Simpevarp/Laxemar, Oskarshamns kommun. SKB has expressed the importance of describing the humans and their activities in these areas and therefore has this synthesis concerning the human population in Forsmark been produced. The description is a statistical synthesis, mainly based upon statistical data from SCB (Statistics Sweden) that has been collected, processed and analysed. The statistical data has not been verified through site inspections and interviews. When using statistical data, it is advisable to note that the data becomes more unreliable if the areas are small, with small populations. The data in this description is essential for future evaluations of the impact on the environment and its human population (environmental impacts assessments). The data is also important when modelling the potential flows of radio nuclides and calculating the risk of exposure in future safety assessments. The actual area for the study is in this report called 'the Simpevarp area', an area of 127.0 km 2 near Oskarshamn nuclear power plant. The land use in Simpevarp area differs notably from the land use in Kalmar laen. The forest area is far more dominating in Simpevarp area than in Kalmar laen and it represents as much as 89% compared to 63% of the total area. Only 4.4% of the area is arable land compared to 11.6% in Kalmar laen and only 0.3% is of other type (wetlands, bare rock, quarries, pites etc) compared to 15.6% in the county. The main observation is that Simpevarp area is a sparsely populated area located in a relatively lightly populated county. In 2002, the population density was 7.4 inhabitants/km 2 , three times lower than in Kalmar laen. The demography statistics show

  17. A phytosociological analysis and description of wetland vegetation and ecological factors associated with locations of high mortality for the 2010-11 Rift Valley fever outbreak in South Africa.

    Science.gov (United States)

    Brand, Robert F; Rostal, Melinda K; Kemp, Alan; Anyamba, Assaf; Zwiegers, Herman; Van Huyssteen, Cornelius W; Karesh, William B; Paweska, Janusz T

    2018-01-01

    Rift Valley fever (RVF) is endemic in Africa and parts of the Middle East. It is an emerging zoonotic disease threat to veterinary and public health. Outbreaks of the disease have severe socio-economic impacts. RVF virus emergence is closely associated with specific endorheic wetlands that are utilized by the virus' mosquito vectors. Limited botanical vegetation surveys had been published with regard to RVF virus (RVFV) ecology. We report on a phytosociological classification, analysis and description of wetland vegetation and related abiotic parameters to elucidate factors possibly associated with the 2010-2011 RVFV disease outbreak in South Africa. The study sites were located in the western Free State and adjacent Northern Cape covering an area of ~40,000 km2 with wetlands associated with high RVF mortality rates in livestock. Other study sites included areas where no RVF activity was reported during the 2010-11 RVF outbreak. A total of 129 plots (30 m2) were selected where a visible difference could be seen in the wetland and upland vegetation. The Braun-Blanquet method was used for plant sampling. Classification was done using modified Two-Way Indicator Species Analysis. The vegetation analysis resulted in the identification of eight plant communities, seven sub-communities and two variants. Indirect ordination was carried out using CANOCO to investigate the relationship between species and wetland ecology. The study also identified 5 categories of wetlands including anthropogenic wetlands. Locations of reported RVF cases overlapped sites characterized by high clay-content soils and specific wetland vegetation. These findings indicate ecological and environmental parameters that represent preferred breeding habitat for RVFV competent mosquito vectors.

  18. YUCCA MOUNTAIN SITE DESCRIPTION

    Energy Technology Data Exchange (ETDEWEB)

    A.M. Simmons

    2004-04-16

    The ''Yucca Mountain Site Description'' summarizes, in a single document, the current state of knowledge and understanding of the natural system at Yucca Mountain. It describes the geology; geochemistry; past, present, and projected future climate; regional hydrologic system; and flow and transport within the unsaturated and saturated zones at the site. In addition, it discusses factors affecting radionuclide transport, the effect of thermal loading on the natural system, and tectonic hazards. The ''Yucca Mountain Site Description'' is broad in nature. It summarizes investigations carried out as part of the Yucca Mountain Project since 1988, but it also includes work done at the site in earlier years, as well as studies performed by others. The document has been prepared under the Office of Civilian Radioactive Waste Management quality assurance program for the Yucca Mountain Project. Yucca Mountain is located in Nye County in southern Nevada. The site lies in the north-central part of the Basin and Range physiographic province, within the northernmost subprovince commonly referred to as the Great Basin. The basin and range physiography reflects the extensional tectonic regime that has affected the region during the middle and late Cenozoic Era. Yucca Mountain was initially selected for characterization, in part, because of its thick unsaturated zone, its arid to semiarid climate, and the existence of a rock type that would support excavation of stable openings. In 1987, the United States Congress directed that Yucca Mountain be the only site characterized to evaluate its suitability for development of a geologic repository for high-level radioactive waste and spent nuclear fuel.

  19. Surface system Forsmark. Site descriptive modelling SDM-Site Forsmark

    International Nuclear Information System (INIS)

    Lindborg, Tobias

    2008-12-01

    SKB has undertaken site characterization of two different areas, Forsmark and Laxemar-Simpevarp, in order to find a suitable location for a geological repository for spent nuclear fuel. This report focuses on the site descriptive modelling of the surface system at Forsmark. The characterization of the surface system at the site was primarily made by identifying and describing important properties in different parts of the surface system, properties concerning e.g. hydrology and climate, Quaternary deposits and soils, hydrochemistry, vegetation, ecosystem functions, but also current and historical land use. The report presents available input data, methodology for data evaluation and modelling, and resulting models for each of the different disciplines. Results from the modelling of the surface system are also integrated with results from modelling of the deep bedrock system. The Forsmark site is located within the municipality of Oesthammar, about 120 km north of Stockholm. The investigated area is located along the shoreline of Oeregrundsgrepen, a funnel-shaped bay of the Baltic Sea. The area is characterized by small-scale topographic variations and is almost entirely located at altitudes lower than 20 metres above sea level. The Quaternary deposits in the area are dominated by till, characterized by a rich content of calcite which was transported by the glacier ice to the area from the sedimentary bedrock of Gaevlebukten about 100 km north of Forsmark. As a result, the surface waters and shallow groundwater at Forsmark are characterized by high pH values and high concentrations of certain major constituents, especially calcium and bicarbonate. The annual precipitation and runoff are 560 and 150 mm, respectively. The lakes are small and shallow, with mean and maximum depths ranging from approximately 0.1 to 1 m and 0.4 to 2 m. Sea water flows into the most low-lying lakes during events giving rise to very high sea levels. Wetlands are frequent and cover 25 to 35

  20. Tsunami shelter in Padang city: Location suitability and management issue

    Science.gov (United States)

    Rita, Eva; Permata, Robby; Yonne, Hilma; Carlo, Nasfryzal

    2017-11-01

    The building of Temporary Evacuation Sites (TES/shelter) is an effort to minimize the vulnerability of the population who live in coastal city areas with high risk of tsunami. Padang city in Indonesia, one of the cities with high risk of tsunami, has built shelter in North Ulak Karang Village, North Padang Sub-district. The problems are the location of shelter does not meet the standard of population number, how to manage the shelter in normal condition (without disaster), and who will be responsible for the management of the shelter. The aim of the study is to learn the suitability of shelter location and the management of the shelter in normal condition as well as the expectation of the people who live near the shelter location. This research uses evaluative-descriptive method with the collection of secondary and primary data through structured interviews with 200 respondents in the area of shelter building. The result shows that the furthest location of the shelter is located at RW 03 with a distance of 1.3 kms which takes 12.15-24.30 minutes. It shows that the shelter location in Padang meets the requirement of FEMA P646. At normal condition, shelter can be used for sport and educational activities, as a center for socialisation and simulation of disaster and other activities. The management of the shelter is done together by government and stakeholders. The proposed management is by forming a team (organization) which involves Disaster Alert groups (KSB) and by making the Standard Operational Procedures (SOP) for their implementation. People expect that the number of shelter is added and the building of the shelter is based on the suitability of location, number of population and availability of land.

  1. Material and process selection using product examples

    DEFF Research Database (Denmark)

    Lenau, Torben Anker

    2001-01-01

    The objective of the paper is to suggest a different procedure for selecting materials and processes within the product development work. The procedure includes using product examples in order to increase the number of alternative materials and processes that is considered. Product examples can c...... a search engine, and through hyperlinks can relevant materials and processes be explored. Realising that designers are very sensitive to user interfaces do all descriptions of materials, processes and products include graphical descriptions, i.e. pictures or computer graphics....

  2. Material and process selection using product examples

    DEFF Research Database (Denmark)

    Lenau, Torben Anker

    2002-01-01

    The objective of the paper is to suggest a different procedure for selecting materials and processes within the product development work. The procedure includes using product examples in order to increase the number of alternative materials and processes that is considered. Product examples can c...... a search engine, and through hyperlinks can relevant materials and processes be explored. Realising that designers are very sensitive to user interfaces do all descriptions of materials, processes and products include graphical descriptions, i.e. pictures or computer graphics....

  3. Description of surface systems. Preliminary site description. Forsmark area Version 1.2

    Energy Technology Data Exchange (ETDEWEB)

    Lindborg, Tobias [ed.

    2005-06-01

    Swedish Nuclear Fuel and Waste Management Co (SKB) started site investigations for a deep repository for spent nuclear fuel in 2002 at two different sites in Sweden, Forsmark and Oskarshamn. The investigations should provide necessary information for a license application aimed at starting underground exploration. For this reason, ecosystem data need to be interpreted and assessed into site descriptive models, which in turn are used for safety assessment studies and for environmental impact assessment. Descriptions of the surface system are also needed for further planning of the site investigations. This report describes the surface ecosystems of the Forsmark site (e.g. hydrology, Quaternary deposits, chemistry, vegetation, animals and the human land use). The ecosystem description is an integration of the site and its regional setting, covering the current state of the biosphere as well as the ongoing natural processes affecting the longterm development. Improving the descriptions is important during both the initial and the complete site investigation phase. Before starting of the initial phase in Forsmark, version 0 of the site descriptive model was developed. The results of the initial site investigation phase is compiled into a preliminary site description of Forsmark (version 1.2) in June 2005. This report provides the major input and background to the biosphere description, in the 1.2 version of the Forsmark site description. The basis for this interim version is quality-assured field data from the Forsmark sub area and regional area, available in the SKB SICADA, and GIS data bases as of July 31th 2004 as well as version 1.1 of the Site Descriptive Model. To achieve an ecosystem site description there is a need to develop discipline-specific models by interpreting and analysing primary data. The different discipline-specific models are then integrated into a system describing interactions and flows and stocks of matter between and within functional units in

  4. Description of surface systems. Preliminary site description. Forsmark area Version 1.2

    International Nuclear Information System (INIS)

    Lindborg, Tobias

    2005-06-01

    Swedish Nuclear Fuel and Waste Management Co (SKB) started site investigations for a deep repository for spent nuclear fuel in 2002 at two different sites in Sweden, Forsmark and Oskarshamn. The investigations should provide necessary information for a license application aimed at starting underground exploration. For this reason, ecosystem data need to be interpreted and assessed into site descriptive models, which in turn are used for safety assessment studies and for environmental impact assessment. Descriptions of the surface system are also needed for further planning of the site investigations. This report describes the surface ecosystems of the Forsmark site (e.g. hydrology, Quaternary deposits, chemistry, vegetation, animals and the human land use). The ecosystem description is an integration of the site and its regional setting, covering the current state of the biosphere as well as the ongoing natural processes affecting the longterm development. Improving the descriptions is important during both the initial and the complete site investigation phase. Before starting of the initial phase in Forsmark, version 0 of the site descriptive model was developed. The results of the initial site investigation phase is compiled into a preliminary site description of Forsmark (version 1.2) in June 2005. This report provides the major input and background to the biosphere description, in the 1.2 version of the Forsmark site description. The basis for this interim version is quality-assured field data from the Forsmark sub area and regional area, available in the SKB SICADA, and GIS data bases as of July 31th 2004 as well as version 1.1 of the Site Descriptive Model. To achieve an ecosystem site description there is a need to develop discipline-specific models by interpreting and analysing primary data. The different discipline-specific models are then integrated into a system describing interactions and flows and stocks of matter between and within functional units in

  5. 40 CFR 414.50 - Applicability; description of the thermosetting resins subcategory.

    Science.gov (United States)

    2010-07-01

    ... thermosetting resins subcategory. 414.50 Section 414.50 Protection of Environment ENVIRONMENTAL PROTECTION... Thermosetting Resins § 414.50 Applicability; description of the thermosetting resins subcategory. The provisions... the products classified under SIC 28214 thermosetting resins including those resins and resin groups...

  6. Hardware description languages

    Science.gov (United States)

    Tucker, Jerry H.

    1994-01-01

    Hardware description languages are special purpose programming languages. They are primarily used to specify the behavior of digital systems and are rapidly replacing traditional digital system design techniques. This is because they allow the designer to concentrate on how the system should operate rather than on implementation details. Hardware description languages allow a digital system to be described with a wide range of abstraction, and they support top down design techniques. A key feature of any hardware description language environment is its ability to simulate the modeled system. The two most important hardware description languages are Verilog and VHDL. Verilog has been the dominant language for the design of application specific integrated circuits (ASIC's). However, VHDL is rapidly gaining in popularity.

  7. Detection and location of leaking TRIGA fuel elements

    International Nuclear Information System (INIS)

    Bouchey, G.D.; Gage, S.J.

    1970-01-01

    Several TRIGA facilities have experienced difficulty resulting from cladding failures of aluminum clad TRIGA fuel elements. Recently, at the University of Texas at Austin reactor facility, fission product releases were observed during 250 kW operation and were attributed to a leaking fuel element. A rather extensive testing program has been undertaken to locate the faulty element. The used sniffer device is described, which provides a quick, easily constructed, and extremely sensitive means of locating leaking fuel elements. The difficulty at The University of Texas was compounded by extremely low levels and the sporadic nature of the releases. However, in the more typical situation, in which a faulty element consistently releases relatively large quantities of fission gas, such a device should locate the leak with little difficulty

  8. Finding the Subcellular Location of Barley, Wheat, Rice and Maize Proteins: The Compendium of Crop Proteins with Annotated Locations (cropPAL).

    Science.gov (United States)

    Hooper, Cornelia M; Castleden, Ian R; Aryamanesh, Nader; Jacoby, Richard P; Millar, A Harvey

    2016-01-01

    Barley, wheat, rice and maize provide the bulk of human nutrition and have extensive industrial use as agricultural products. The genomes of these crops each contains >40,000 genes encoding proteins; however, the major genome databases for these species lack annotation information of protein subcellular location for >80% of these gene products. We address this gap, by constructing the compendium of crop protein subcellular locations called crop Proteins with Annotated Locations (cropPAL). Subcellular location is most commonly determined by fluorescent protein tagging of live cells or mass spectrometry detection in subcellular purifications, but can also be predicted from amino acid sequence or protein expression patterns. The cropPAL database collates 556 published studies, from >300 research institutes in >30 countries that have been previously published, as well as compiling eight pre-computed subcellular predictions for all Hordeum vulgare, Triticum aestivum, Oryza sativa and Zea mays protein sequences. The data collection including metadata for proteins and published studies can be accessed through a search portal http://crop-PAL.org. The subcellular localization information housed in cropPAL helps to depict plant cells as compartmentalized protein networks that can be investigated for improving crop yield and quality, and developing new biotechnological solutions to agricultural challenges. © The Author 2015. Published by Oxford University Press on behalf of Japanese Society of Plant Physiologists. All rights reserved. For permissions, please email: journals.permissions@oup.com.

  9. A Location Privacy Aware Friend Locator

    DEFF Research Database (Denmark)

    Siksnys, Laurynas; Thomsen, Jeppe Rishede; Saltenis, Simonas

    2009-01-01

    to trade their location privacy for quality of service, limiting the attractiveness of the services. The challenge is to develop a communication-efficient solution such that (i) it detects proximity between a user and the user’s friends, (ii) any other party is not allowed to infer the location of the user...

  10. Locations of criticality alarms and nuclear accident dosimeters at Hanford

    International Nuclear Information System (INIS)

    1992-08-01

    Hanford facilities that contain fissionable materials capable of achieving critical mass are monitored with nuclear accident dosimeters (NADS) in compliance with the requirements of DOE Order 5480.11, Chapter XI, Section 4.c. (DOE 1988). The US Department of Energy (DOE) Richland Field Office (RL) has assigned the responsibility for maintaining and evaluating the Hanford NAD system to the Instrumentation and External Dosimetry (I ampersand ED) Section of Pacific Northwest Laboratory's (PNL's) Health Physics Department. This manual provides a description of the Hanford NAD, criteria and instructions for proper NAD placement, and the locations of these dosimeters onsite

  11. Biomass production on the Olympic and Kitsap Peninsulas, Washington: updated logging residue ratios, slash pile volume-to-weight ratios, and supply curves for selected locations

    Science.gov (United States)

    Jason C. Cross; Eric C. Turnblom; Gregory J. Ettl

    2013-01-01

    Biomass residue produced by timber harvest operations is estimated for the Olympic and Kitsap Peninsulas, Washington. Scattered residues were sampled in 53 harvest units and piled residues were completely enumerated in 55 harvest units. Production is based on 2008 and 2009 data and is stratified by forest location, ownership type, harvest intensity, and harvest method...

  12. 40 CFR 405.120 - Applicability; description of the dry whey subcategory.

    Science.gov (United States)

    2010-07-01

    ... whey subcategory. 405.120 Section 405.120 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS DAIRY PRODUCTS PROCESSING POINT SOURCE CATEGORY Dry Whey Subcategory § 405.120 Applicability; description of the dry whey subcategory. The provisions of this subpart...

  13. Consumer perceptions of food products involving genetic modification

    DEFF Research Database (Denmark)

    Grunert, Klaus G.; Lähteenmäki, L.; Nielsen, Niels Asger

    2001-01-01

    Product descriptions of cheese, candy and salmon products were presented to samples of respondents in four Nordic countries. The descriptions represented various applications of genetic modification (GM), varied along a "distance" dimension and a "what is modified" dimension, and were presented...... along with a conventionally produced product. Respondents ranked the products according to preference, and their perceptions were ascertained by the laddering method. Results indicate that respondents regard "non-GM" as a value in itself, and associate the use of GM with a host of negative consequences...... were product specific....

  14. An exploratory, descriptive study of consumer opinions and behaviors regarding health products sales at 4 chiropractic practices in a large, western Canadian urban center.

    Science.gov (United States)

    Page, Stacey A; Mbadiwe, Chinyere; McMorland, D Gordon; Grod, Jaroslaw P

    2015-01-01

    This study describes the opinions and behaviors of chiropractic patients in a large, western Canadian urban center regarding the sale of health products by doctors of chiropractic. A brief, descriptive survey consisting of both fixed-choice and open-ended questions was distributed by clinic reception staff at 4 chiropractic offices in Calgary, Alberta, Canada. Each practice sold a range of health products, including those relating to musculoskeletal care and nutrition, and served between 275 and 320 clients per week. After a 10-week recruitment interval between January and March 2013, a convenience sample of 103 chiropractic patients was obtained. Most patients supported the sale of health products by doctors of chiropractic (n = 101; 98.1%), and most had made health product purchases from a doctor of chiropractic at some point (n = 73; 70.9%). Products relating to muscular care, exercise/rehabilitation products, and pillows were purchased most often (>40%). Consumers were most supportive of doctors of chiropractic selling products they perceived to be directly related to musculoskeletal care. Some participants believed that there should be limits placed on the range of products sold including the products had to be consistent with the practitioner's area of expertise and had to have some demonstrated level of effectiveness. Primary reasons for health product purchase included the doctor's recommendations, convenience, and perception that the product would improve well-being (>50%). This study found that chiropractic patients were supportive of health product sales by doctors of chiropractic, assuming certain conditions were met. Consumers believed that product sales should be undertaken with integrity and should be consistent with the doctor's area of expertise. Consumer beliefs appeared to impact their purchasing behaviors. Copyright © 2015 National University of Health Sciences. Published by Elsevier Inc. All rights reserved.

  15. Description of surface systems. Preliminary site description Simpevarp sub area - Version 1.2

    Energy Technology Data Exchange (ETDEWEB)

    Lindborg, Tobias [ed.

    2005-03-01

    Swedish Nuclear Fuel and Waste Management Co is currently conducting site characterisation in the Simpevarp area. The area is divided into two subareas, the Simpevarp and the Laxemar subarea. The two subareas are surrounded by a common regional model area, the Simpevarp area. This report describes both the regional area and the subareas. This report is an interim version (model version 1.2) of the description of the surface systems at the Simpevarp area, and should be seen as a background report to the site description of the Simpevarp area, version 1.2, SKB-R--05-08. The basis for this description is quality-assured field data available in the SKB SICADA and GIS databases, together with generic data from the literature. The Surface system, here defined as everything above the bedrock, comprises a number of separate disciplines (e.g. hydrology, geology, topography, oceanography and ecology). Each discipline has developed descriptions and models for a number of properties that together represent the site description. The current methodology for developing the surface system description and the integration to ecosystem models is documented in a methodology strategy report SKB-R--03-06. The procedures and guidelines given in that report were followed in this report. Compared with version 1.1 of the surface system description SKB-R--04-25, this report presents considerable additional features, especially in the ecosystem description (Chapter 4) and in the description of the surface hydrology (Section 3.4). A first attempt has also been made to connect the flow of matter (carbon) between the different ecosystems into an overall ecosystem model at a landscape level. A summarised version of this report is also presented in SKB-R--05-08 together with geological-, hydrogeological-, transport properties-, thermal properties-, rock mechanics- and hydrogeochemical descriptions.

  16. Description of surface systems. Preliminary site description Simpevarp sub area - Version 1.2

    International Nuclear Information System (INIS)

    Lindborg, Tobias

    2005-03-01

    Swedish Nuclear Fuel and Waste Management Co is currently conducting site characterisation in the Simpevarp area. The area is divided into two subareas, the Simpevarp and the Laxemar subarea. The two subareas are surrounded by a common regional model area, the Simpevarp area. This report describes both the regional area and the subareas. This report is an interim version (model version 1.2) of the description of the surface systems at the Simpevarp area, and should be seen as a background report to the site description of the Simpevarp area, version 1.2, SKB-R--05-08. The basis for this description is quality-assured field data available in the SKB SICADA and GIS databases, together with generic data from the literature. The Surface system, here defined as everything above the bedrock, comprises a number of separate disciplines (e.g. hydrology, geology, topography, oceanography and ecology). Each discipline has developed descriptions and models for a number of properties that together represent the site description. The current methodology for developing the surface system description and the integration to ecosystem models is documented in a methodology strategy report SKB-R--03-06. The procedures and guidelines given in that report were followed in this report. Compared with version 1.1 of the surface system description SKB-R--04-25, this report presents considerable additional features, especially in the ecosystem description (Chapter 4) and in the description of the surface hydrology (Section 3.4). A first attempt has also been made to connect the flow of matter (carbon) between the different ecosystems into an overall ecosystem model at a landscape level. A summarised version of this report is also presented in SKB-R--05-08 together with geological-, hydrogeological-, transport properties-, thermal properties-, rock mechanics- and hydrogeochemical descriptions

  17. Optimization of a low-cost hyperosmotic medium and establishing the fermentation kinetics of erythritol production by Yarrowia lipolytica from crude glycerol.

    Science.gov (United States)

    Yang, Li-Bo; Zhan, Xiao-Bei; Zhu, Li; Gao, Min-Jie; Lin, Chi-Chung

    2016-05-18

    The production of erythritol by Yarrowia lipolytica from low-cost substitutable substrates for high yield was investigated. Crude glycerol, urea, and NaCl related to osmotic pressure were the most significant factors affecting erythritol production. An artificial neural network model and genetic algorithm were used to search the optimal composition of the significant factors and locate the resulting erythritol yield. Medium with 232.39 g/L crude glycerol, 1.57 g/L urea, and 31.03 g/L NaCl led to predictive maximum erythritol concentration of 110.7 g/L. The erythritol concentration improved from 50.4 g/L to 109.2 g/L with the optimized medium, which was reproducible. Erythritol fermentation kinetics were investigated in a batch system. Multistep fermentation kinetic models with hyperosmotic inhibitory effects were developed. The resulting mathematical equations provided a good description of temporal variations such as microbial growth (X), substrate consumption (S), and product formation (P) in erythritol fermentation. The accordingly derived model is the first reported model for fermentative erythritol production from glycerol, providing useful information to optimize the growth of Y. lipolytica and contributing visual description for the erythritol fermentation process under high osmotic pressure, as well as improvement of productivity and efficiency.

  18. Guidelines for Description

    NARCIS (Netherlands)

    Links, P.; Horsman, Peter; Kühnel, Karsten; Priddy, M.; Reijnhoudt, Linda; Merenmies, Mark

    2013-01-01

    The Guidelines follow the conceptual metadata model (deliverable 17.2). They include guidelines for description of collection-holding institutions, document collections, organisations, personalities, events, camps and ghettos. As much as possible the guidelines comply with the descriptive standards

  19. Initial rheological description of high performance concretes

    Directory of Open Access Journals (Sweden)

    Alessandra Lorenzetti de Castro

    2006-12-01

    Full Text Available Concrete is defined as a composite material and, in rheological terms, it can be understood as a concentrated suspension of solid particles (aggregates in a viscous liquid (cement paste. On a macroscopic scale, concrete flows as a liquid. It is known that the rheological behavior of the concrete is close to that of a Bingham fluid and two rheological parameters regarding its description are needed: yield stress and plastic viscosity. The aim of this paper is to present the initial rheological description of high performance concretes using the modified slump test. According to the results, an increase of yield stress was observed over time, while a slight variation in plastic viscosity was noticed. The incorporation of silica fume showed changes in the rheological properties of fresh concrete. The behavior of these materials also varied with the mixing procedure employed in their production. The addition of superplasticizer meant that there was a large reduction in the mixture's yield stress, while plastic viscosity remained practically constant.

  20. Locative media

    CERN Document Server

    Wilken, Rowan

    2014-01-01

    Not only is locative media one of the fastest growing areas in digital technology, but questions of location and location-awareness are increasingly central to our contemporary engagements with online and mobile media, and indeed media and culture generally. This volume is a comprehensive account of the various location-based technologies, services, applications, and cultures, as media, with an aim to identify, inventory, explore, and critique their cultural, economic, political, social, and policy dimensions internationally. In particular, the collection is organized around the perception that the growth of locative media gives rise to a number of crucial questions concerning the areas of culture, economy, and policy.

  1. Mucosal Barrier Injury Laboratory-Confirmed Bloodstream Infections (MBI-LCBI): Descriptive Analysis of Data Reported to National Healthcare Safety Network (NHSN), 2013.

    Science.gov (United States)

    Epstein, Lauren; See, Isaac; Edwards, Jonathan R; Magill, Shelley S; Thompson, Nicola D

    2016-01-01

    OBJECTIVES To determine the impact of mucosal barrier injury laboratory-confirmed bloodstream infections (MBI-LCBIs) on central-line-associated bloodstream infection (CLABSI) rates during the first year of MBI-LCBI reporting to the National Healthcare Safety Network (NHSN) DESIGN Descriptive analysis of 2013 NHSN data SETTING Selected inpatient locations in acute care hospitals METHODS A descriptive analysis of MBI-LCBI cases was performed. CLABSI rates per 1,000 central-line days were calculated with and without the inclusion of MBI-LCBIs in the subset of locations reporting ≥1 MBI-LCBI, and in all locations (regardless of MBI-LCBI reporting) to determine rate differences overall and by location type. RESULTS From 418 locations in 252 acute care hospitals reporting ≥1 MBI-LCBIs, 3,162 CLABSIs were reported; 1,415 (44.7%) met the MBI-LCBI definition. Among these locations, removing MBI-LCBI from the CLABSI rate determination produced the greatest CLABSI rate decreases in oncology (49%) and ward locations (45%). Among all locations reporting CLABSI data, including those reporting no MBI-LCBIs, removing MBI-LCBI reduced rates by 8%. Here, the greatest decrease was in oncology locations (38% decrease); decreases in other locations ranged from 1.2% to 4.2%. CONCLUSIONS An understanding of the potential impact of removing MBI-LCBIs from CLABSI data is needed to accurately interpret CLABSI trends over time and to inform changes to state and federal reporting programs. Whereas the MBI-LCBI definition may have a large impact on CLABSI rates in locations where patients with certain clinical conditions are cared for, the impact of MBI-LCBIs on overall CLABSI rates across inpatient locations appears to be more modest. Infect. Control Hosp. Epidemiol. 2015;37(1):2-7.

  2. Personalized Location-Based Recommendation Services for Tour Planning in Mobile Tourism Applications

    Science.gov (United States)

    Yu, Chien-Chih; Chang, Hsiao-Ping

    Travel and tour planning is a process of searching, selecting, grouping and sequencing destination related products and services including attractions, accommodations, restaurants, and activities. Personalized recommendation services aim at suggesting products and services to meet users’ preferences and needs, while location-based services focus on providing information based on users’ current positions. Due to the fast growing of user needs in the mobile tourism domain, how to provide personalized location-based tour recommendation services becomes a critical research and practical issue. The objective of this paper is to propose a system architecture and design methods for facilitating the delivery of location-based recommendation services to support personalized tour planning. Based on tourists’ current location and time, as well as personal preferences and needs, various recommendations regarding sightseeing spots, hotels, restaurants, and packaged tour plans can be generated efficiently. An application prototype is also implemented to illustrate and test the system feasibility and effectiveness.

  3. Hamstring Reinjuries Occur at the Same Location and Early After Return to Sport: A Descriptive Study of MRI-Confirmed Reinjuries.

    Science.gov (United States)

    Wangensteen, Arnlaug; Tol, Johannes L; Witvrouw, Erik; Van Linschoten, Robbart; Almusa, Emad; Hamilton, Bruce; Bahr, Roald

    2016-08-01

    Despite relatively high reinjury rates after acute hamstring injuries, there is a lack of detailed knowledge about where and when hamstring reinjuries occur, and studies including imaging-confirmed reinjuries are scarce. To investigate the location, radiological severity, and timing of reinjuries on magnetic resonance imaging (MRI) compared with the index injury. Case series; Level of evidence, 4. A MRI scan was obtained ≤5 days after an acute hamstring index injury in 180 athletes, and time to return to sport (RTS) was registered. Athletes with an MRI-confirmed reinjury in the same leg ≤365 days after RTS were included. Categorical grading and standardized MRI parameters of the index injury and reinjury were scored by a single radiologist (with excellent intraobserver reliability). To determine the location of the reinjury, axial and coronal views of the index injury and reinjury were directly compared on proton density-weighted fat-suppressed images. In the 19 athletes included with reinjury, 79% of these reinjuries occurred in the same location within the muscle as the index injury. The median time to RTS after the index injury was 19 days (range, 5-37 days; interquartile range [IQR], 15 days). The median time between the index injury and reinjury was 60 days (range, 20-316 days; IQR, 131 days) and the median time between RTS after the index injury and the reinjury was 24 days (range, 4-311 days; IQR, 140 days). More than 50% of reinjuries occurred within 25 days (4 weeks) after RTS from the index injury and 50% occurred within 50 days after the index injury. All reinjuries with more severe radiological grading occurred in the same location as the index injury. The majority of the hamstring reinjuries occurred in the same location as the index injury, early after RTS and with a radiologically greater extent, suggesting incomplete biological and/or functional healing of the index injury. Specific exercise programs focusing on reinjury prevention initiated

  4. Locator-Checker-Scaler Object Tracking Using Spatially Ordered and Weighted Patch Descriptor.

    Science.gov (United States)

    Kim, Han-Ul; Kim, Chang-Su

    2017-08-01

    In this paper, we propose a simple yet effective object descriptor and a novel tracking algorithm to track a target object accurately. For the object description, we divide the bounding box of a target object into multiple patches and describe them with color and gradient histograms. Then, we determine the foreground weight of each patch to alleviate the impacts of background information in the bounding box. To this end, we perform random walk with restart (RWR) simulation. We then concatenate the weighted patch descriptors to yield the spatially ordered and weighted patch (SOWP) descriptor. For the object tracking, we incorporate the proposed SOWP descriptor into a novel tracking algorithm, which has three components: locator, checker, and scaler (LCS). The locator and the scaler estimate the center location and the size of a target, respectively. The checker determines whether it is safe to adjust the target scale in a current frame. These three components cooperate with one another to achieve robust tracking. Experimental results demonstrate that the proposed LCS tracker achieves excellent performance on recent benchmarks.

  5. Selecting optimum locations for co-located wave and wind energy farms. Part II: A case study

    International Nuclear Information System (INIS)

    Astariz, S.; Iglesias, G.

    2016-01-01

    Highlights: • The benefits of wave and wind combined systems relative to independent farms are analysed. • This purpose is carried out through a case study off the Danish coast. • The power production, power smoothing and shadow effect are analysed. • Hindcast and measured wave and wind data from 2005 to 2015 are used. • Third-generation models of winds and waves (WAsP and SWAN) are used. - Abstract: Combined energy systems present an opportunity to enhance the competitiveness of renewables and overcome other challenges of these novel renewables by realising the synergies between them. Among the different possibilities for combined systems, this work focuses on wave and wind co-located farms with the aim of assessing their benefits relative to standalone wind farms. To this end we estimate the energy production, investigate the power smoothing and shadow effect, and quantify the reduction in downtime achieved by the co-located farm through a case study off the Danish coast – a promising area for co-located farms based on the available resource and other considerations including technical constraints. The analysis is carried out based on hindcast data and observations extending from 2005 to 2015, and by means of state-of-the-art numerical models of the wind and wave fields – WAsP and SWAN, respectively. It is found that the energy yield per unit area with the combined wave-wind farm increases by 3.4% relative to a standalone wind farm, the downtime periods decrease by 58% and the power output variability reduces by 12.5%. Moreover, the capital and operational expenditures (CAPEX and OPEX, respectively) would also be significantly reduced thanks to the synergies realised through the combination of wind and wave power.

  6. Housing the Mobile Entrepeneur. The location behavior of firms in urban residential neighbourhoods

    NARCIS (Netherlands)

    Risselada, A.H.

    2013-01-01

    Changing economic production processes have opened up new locational demands for firms and have led to an increasingly diverse firm population displaying fragmented location patterns. This research focuses on those spatial configurations that fit the current economic fragmentation and changing

  7. Integrated Project Management System description

    International Nuclear Information System (INIS)

    1994-09-01

    The Integrated Program Management System (IPMS) Description is a ''working'' document that describes the work processes of the Uranium Mill Tailings Remedial Action Project Office (UMTRA) and IPMS Group. This document has undergone many revisions since the UMTRA Project began; this revision not only updates the work processes but more clearly explains the relationships between the Project Office, contractors, and other participants. The work process flow style has been revised to better describe Project work and the relationships of participants. For each work process, more background and guidance on ''why'' and ''what is expected'' is given. For example, a description of activity data sheets has been added in the work organization and the Project performance and reporting processes, as well as additional detail about the federal budget process and funding management and improved flow charts and explanations of cost and schedule management. A chapter has been added describing the Cost Reduction/Productivity Improvement Program. The Change Control Board (CCB) procedures (Appendix A) have been updated. Project critical issues meeting (PCIM) procedures have been added as Appendix B. Budget risk assessment meeting procedures have been added as Appendix C. These appendices are written to act as stand-alone documentation for each process. As the procedures are improved and updated, the documentation can be updated separately

  8. Resource description and access 2013 revision

    CERN Document Server

    2013-01-01

    This e-book contains the 2013 Revision of RDA: Resource Description and Access, and includes the July 2013 Update. This e-book offers links within the RDA text and the capability of running rudimentary searches of RDA, but please note that this e-book does not have the full range of content or functionality provided by the subscription product RDA Toolkit. Included: A full accumulation of RDA- the revision contains a full set of all current RDA instructions. It replaces the previous version of RDA Print as opposed to being an update packet to that version. RDA has gone through many changes sin

  9. A Qualitative Description of Chronic Neck Pain has Implications for Outcome Assessment and Classification

    Science.gov (United States)

    MacDermid, Joy C.; Walton, David M.; Bobos, Pavlos; Lomotan, Margaret; Carlesso, Lisa

    2016-01-01

    Background: Neck pain is common, but few studies have used qualitative methods to describe it. Purpose: To describe the quality, distribution and behavior of neck pain. Methods: Sixteen people (15 females; mean age = 33 years (range = 20-69)) with neck pain >3 months were interviewed using a semi-structured guide. Interview data were recorded and transcribed verbatim. Descriptive content analysis was performed by two authors. Participants then completed an electronic descriptive pain tool, placing icons (word and icon descriptors to describe quality) on anatomic diagrams to identify location of pain, and intensity ratings at each location. This data was triangulated with interviews. Results: Aching pain and stiffness in the posterior neck and shoulder region were the most common pain complaints. All patients reported more than one pain quality. Associated headache was common (11/16 people); but varied in location and pain quality; 13/16 reported upper extremity symptoms. Neuropathic characteristics (burning) or sensory disturbance (numbness/tingling) occurred in some patients, but were less common. Activities that involved lifting/carrying and psychological stress were factors reported as exacerbating pain. Physical activity was valued as essential to function, but also instigated exacerbations. Concordance between the structured pain tool and interviews enhanced trustworthiness of our results. Integrating qualitative findings with a previous classification system derived a 7-axis neck pain classification: source/context, sample subgroup, distribution, duration, episode pattern, pain/symptom severity, disability/participation restriction. Conclusions: Qualitative assessment and classification should consider the multiple dimensions of neck pain. PMID:28217199

  10. Location of Urban Logistic Terminals as Hub Location Problem

    Directory of Open Access Journals (Sweden)

    Jasmina Pašagić Škrinjar

    2012-09-01

    Full Text Available In this paper the problems of locating urban logistic terminals are studied as hub location problems that due to a large number of potential nodes in big cities belong to hard non-polynomial problems, the so-called NP-problems. The hub location problems have found wide application in physical planning of transport and telecommunication systems, especially systems of fast delivery, networks of logistic and distribution centres and cargo traffic terminals of the big cities, etc. The paper defines single and multiple allocations and studies the numerical examples. The capacitated single allocation hub location problems have been studied, with the provision of a mathematical model of selecting the location for the hubs on the network. The paper also presents the differences in the possibilities of implementing the exact and heuristic methods to solve the actual location problems of big dimensions i.e. hub problems of the big cities.

  11. Formulation of a Production Strategy for a Software Product Line

    Science.gov (United States)

    2009-08-01

    Strategy 9 5.1 Identifying the Critical Factors 9 5.1.1 Market Analysis 10 5.1.2 Building a Business Case 10 5.1.3 Scoping 10 5.1.4 Technology...ability to deliver new products quickly (i.e., its time to market ). The production strategy for a software product line is the high-level description of... strategy . The critical factors mentioned above refer to both market conditions that affect an organ- ization and how an organization’s products can

  12. Assessment of management alternatives for LWR wastes. Volume 4. Description of a Belgian scenario for PWR waste

    International Nuclear Information System (INIS)

    Crustin, J.; Glibert, R.

    1993-01-01

    This report deals with the description of a management route for PWR waste relying to a certain extent on Belgian practices in this particular area. This description, which aims at providing input data for subsequent cost evaluation, includes all management steps which are usually implemented for solid, liquid and gaseous wastes from their production up to the interim storage of the final waste products. This study is part of an overall theoretical exercise aimed at evaluating a selection of management routes for LWR waste based on economical and radiological criteria

  13. Assessment of management alternatives for LWR wastes. Volume 2. Description of a French scenario for PWR waste

    International Nuclear Information System (INIS)

    Saulieu, E. de; Chary, C.

    1993-01-01

    This report deals with the description of a management route for PWR waste relying to a certain extent on French practices in this particular area. This description, which aims at providing input data for subsequent cost evaluation, includes all management steps which are usually implemented for solid, liquid and gaseous wastes from their production up to the interim storage of the final waste products. This study is part of an overall theoretical exercise aimed at evaluating a selection of management routes for LWR waste based on economical and radiological criteria

  14. Descriptive set theory

    CERN Document Server

    Moschovakis, YN

    1987-01-01

    Now available in paperback, this monograph is a self-contained exposition of the main results and methods of descriptive set theory. It develops all the necessary background material from logic and recursion theory, and treats both classical descriptive set theory and the effective theory developed by logicians.

  15. Water Quality Sampling Locations Along the Shoreline of the Columbia River, Hanford Site, Washington

    Energy Technology Data Exchange (ETDEWEB)

    Peterson, Robert E.; Patton, Gregory W.

    2009-12-14

    As environmental monitoring evolved on the Hanford Site, several different conventions were used to name or describe location information for various sampling sites along the Hanford Reach of the Columbia River. These methods range from handwritten descriptions in field notebooks to the use of modern electronic surveying equipment, such as Global Positioning System receivers. These diverse methods resulted in inconsistent archiving of analytical results in various electronic databases and published reports because of multiple names being used for the same site and inaccurate position data. This document provides listings of sampling sites that are associated with groundwater and river water sampling. The report identifies names and locations for sites associated with sampling: (a) near-river groundwater using aquifer sampling tubes; (b) riverbank springs and springs areas; (c) pore water collected from riverbed sediment; and (d) Columbia River water. Included in the listings are historical names used for a particular site and the best available geographic coordinates for the site, as of 2009. In an effort to create more consistency in the descriptive names used for water quality sampling sites, a naming convention is proposed in this document. The convention assumes that a unique identifier is assigned to each site that is monitored and that this identifier serves electronic database management requirements. The descriptive name is assigned for the convenience of the subsequent data user. As the historical database is used more intensively, this document may be revised as a consequence of discovering potential errors and also because of a need to gain consensus on the proposed naming convention for some water quality monitoring sites.

  16. Automatic procedures for computing complete configuration geometry from individual component descriptions

    Science.gov (United States)

    Barger, Raymond L.; Adams, Mary S.

    1994-01-01

    Procedures are derived for developing a complete airplane surface geometry starting from component descriptions. The procedures involve locating the intersection lines of adjacent components and omitting any regions for which part of one surface lies within the other. The geometry files utilize the wave-drag (Harris) format, and output files are written in Hess format. Two algorithms are used: one, if both intersecting surfaces have airfoil cross sections; the other, if one of the surfaces has circular cross sections. Some sample results in graphical form are included.

  17. Competition in Multiple Characteristics: An Empirical Test of Location Equilibrium.

    OpenAIRE

    Elizalde, J. (Javier)

    2010-01-01

    With products differentiated in multiple dimensions, the location equilibrium for a duopolistic market exhibits aximum differentiation in one dimension and minimum differentiation in all the other dimensions. This paper analyses whether this equilibrium arises using real data for the Spanish movie theatre exhibition market where the firms (cinemas) are differentiated along two dimensions (their geographical location and the set of movies exhibited). Data not only shows a trade-off such that c...

  18. Comparison of descriptive sensory analysis and chemical analysis for oxidative changes in milk

    DEFF Research Database (Denmark)

    Hedegaard, Rikke Susanne Vingborg; Kristensen, D.; Nielsen, J. H.

    2006-01-01

    products. The milk samples were evaluated in parallel by descriptive sensory analysis by a trained panel, and the correlation between the chemical analysis and the descriptive sensory analysis was evaluated. The fatty acid composition of the 3 types of milk was found to influence the oxidative...... and lipolytic changes occurring in the milk during chill storage for 4 d. Sensory analysis and chemical analysis showed high correlation between the typical descriptors for oxidation such as cardboard, metallic taste, and boiled milk and specific chemical markers for oxidation such as hexanal. Notably, primary...... oxidation products (i.e., lipid hydroperoxides) and even the tendency of formation of radicals as measured by electron spin resonance spectroscopy were also highly correlated to the sensory descriptors for oxidation. Electron spin resonance spectroscopy should accordingly be further explored as a routine...

  19. On intra-supply chain system with an improved distribution plan, multiple sales locations and quality assurance.

    Science.gov (United States)

    Chiu, Singa Wang; Huang, Chao-Chih; Chiang, Kuo-Wei; Wu, Mei-Fang

    2015-01-01

    Transnational companies, operating in extremely competitive global markets, always seek to lower different operating costs, such as inventory holding costs in their intra- supply chain system. This paper incorporates a cost reducing product distribution policy into an intra-supply chain system with multiple sales locations and quality assurance studied by [Chiu et al., Expert Syst Appl, 40:2669-2676, (2013)]. Under the proposed cost reducing distribution policy, an added initial delivery of end items is distributed to multiple sales locations to meet their demand during the production unit's uptime and rework time. After rework when the remaining production lot goes through quality assurance, n fixed quantity installments of finished items are then transported to sales locations at a fixed time interval. Mathematical modeling and optimization techniques are used to derive closed-form optimal operating policies for the proposed system. Furthermore, the study demonstrates significant savings in stock holding costs for both the production unit and sales locations. Alternative of outsourcing product delivery task to an external distributor is analyzed to assist managerial decision making in potential outsourcing issues in order to facilitate further reduction in operating costs.

  20. A description of the reactor inventory module NECTAR-RICE

    International Nuclear Information System (INIS)

    Nair, S.

    1984-06-01

    This note describes the NECTAR-RICE module of the CEGB's NECTAR environmental code, which can be used to calculate the actinide and/or fission product inventories of irradiated nuclear fuel used as input to the calculation of the release source term to atmosphere for accidental releases. The range of actinide and fission product nuclides considered is large enough to permit studies to be made for virtually any irradiation history consisting of ad hoc combinations of irradiation and cooling periods. The actinide and fission product inventories are calculated for burnup periods using numerical methods best suited to this problem, while analytical solutions are used for cooling periods. The code can be used to perform a coupled actinide-fission product calculation, a solely actinide calculation or a solely fission product calculation. Output consists of inventories, activities, and γ spectra, among others. A brief description is also given of previous work in this field. (author)

  1. Windows Calorimeter Control (WinCal) program computer software design description

    International Nuclear Information System (INIS)

    Pertzborn, N.F.

    1997-01-01

    The Windows Calorimeter Control (WinCal) Program System Design Description contains a discussion of the design details for the WinCal product. Information in this document will assist a developer in maintaining the WinCal system. The content of this document follows the guidance in WHC-CM-3-10, Software Engineering Standards, Standard for Software User Documentation

  2. Botanical Composition, Grass Production, and Carrying Capacity of Pasture in Timor Tengah Selatan District

    Directory of Open Access Journals (Sweden)

    V. E. Se’u

    2015-12-01

    Full Text Available This study was conducted to analyze the botanical composition, grass production, carrying capacity, and potential production of nutrients in pasture located in Timor Tengah Selatan Regency. The experiment was conducted from February to July 2013, using field survey method. The botanical composition, grass production and carrying capacity on real condition were analyzed descriptively, while the grass production and carrying capacity based of cutting arrangement were analyzed by using randomized block factorial design with 3 altitude locations (Sub District of Mollo Utara with altitude of 1007 m above sea level; Sub District of Noebeba, 500 m ASL, and Sub District of Amanuban Selatan, 65 m ASL x 2 cutting intervals (1 and 2 month and 5 replications. The results showed that the grass type dominated the pasture in the Sub District of Mollo Utara, while legum type was more dominant in the pasture in the Sub Districts of Noebeba and Amanuban Selatan. The potential production of dry matter grass in Timor Tengah Selatan Regency based on real condition was 150 to 390 kg/ha/yr, this could accommodate 0.24 to 0.63 AU/ha/yr. The arrangement of cutting interval by 1 month in Mollo Utara and 2 months in Noebeba and Amanuban Selatan could increase (P<0.05 grass production and carrying capacity. The potential productions of grass nutrients were higher in Sub District of Mollo Utara, while potential production of grass dry matter was higher in Sub Districts of Noebeba and Amanuban Selatan. It was concluded that grass dry matter potential production and carrying capacity in Timor Tengah Selatan Regency were low. The arrangement of cutting interval could increase grass dry matter potential production, carrying capacity, nutrition production, and quality of nutrition.

  3. Location, location, location: does early cancer in Barrett's esophagus have a preference?

    Science.gov (United States)

    Enestvedt, Brintha K; Lugo, Ricardo; Guarner-Argente, Carlos; Shah, Pari; Falk, Gary W; Furth, Emma; Ginsberg, Gregory G

    2013-09-01

    Early cancer (high-grade dysplasia [HGD] and intramucosal carcinoma [ImCa]) associated with Barrett's esophagus (BE) may have a circumferential spatial predilection. To describe the esophageal circumferential location of early cancer in BE. Retrospective study, single tertiary referral center. One hundred nineteen patients were referred for endoscopic eradication therapy for early cancer associated with BE. Endoscopic images and reports and pathology were reviewed. Circumferential location designation of early cancer in BE by using a clock-face orientation. One hundred nineteen of 131 patients referred for endoscopic eradication therapy had a location designation for their advanced histology (91.9%). There were a total of 57 patients (47.9%) with HGD and 62 patients (52.1%) with ImCa. There was a significantly higher rate of early cancer (HGD or ImCa) in the right hemisphere (12 to 6 o'clock location) compared with the left hemisphere (84.9% vs 15.1%, P cancer was found in the 12 to 3 o'clock quadrant (64.7%); 71.9% of HGD and 58.1% of ImCa lesions were located in the 12 to 3 o'clock quadrant. Retrospective design, single center. Early cancer associated with BE is far more commonly found in the right hemisphere of the esophagus (12 to 6 o'clock) with the highest rate in the 12 to 3 o'clock quadrant. These findings support enhanced scrutiny of the right hemisphere of the esophagus during surveillance and endoscopic treatment of patients with BE. Copyright © 2013 American Society for Gastrointestinal Endoscopy. Published by Mosby, Inc. All rights reserved.

  4. Determining potential locations for biomass valorization using a macro screening approach

    Energy Technology Data Exchange (ETDEWEB)

    Van Dael, M.; Van Passel, S.; Schreurs, E. [Research Group of Environmental Economics, Centre for Environmental Sciences, Hasselt University, Agoralaan Gebouw D, 3590 Diepenbeek (Belgium); Pelkmans, L.; Guisson, R. [VITO, Boeretang 200, 2400 Mol (Belgium); Swinnen, G. [Research Group of Marketing, Hasselt University, Agoralaan Gebouw D, 3590 Diepenbeek (Belgium)

    2012-10-15

    European policy states that by 2020 at least 20% of final energy consumption should come from renewable energy sources. Biomass as a renewable energy source cannot be disregarded in order to attain this target. In this study a macro screening approach is developed to determine potential locations for biomass valorization in a specified region. The approach consists of five steps: (1) criteria determination, (2) data gathering, (3) weight assignment, (4) final score, (5) spatial representation. The resulting outcome provides a first well balanced scan of the possibilities for energy production using regional biomass. This way policy makers and investors can be supported and motivated to study the possibilities of building energy production plants at specific locations in more detail, which can be described as a 'micro-screening'. In our case study the approach is applied to determine the potentially interesting locations to establish a biomass project. The region has been limited to the forty-four communities in the province of Limburg (Belgium). The macro screening approach has shown to be very effective since the amount of interesting locations has been reduced drastically.

  5. Description langugage for the modelling and analysis of temporal change of instrumentation and control system structures

    International Nuclear Information System (INIS)

    Goering, Markus Heinrich

    2013-01-01

    comprehensive requirements for the superposition of event sequences and failure combinations. For this reason, the synthesis of a description language, under consideration of the aforementioned challenges, is necessary; supplemented by a method utilising the description language for efficient engineering and I and C design analysis. Due to the abstraction of AutomationML as a meta-metamodel, it is utilised as the basis for the description language synthesis, however AutomationML also does not fulfil all target criteria. On one hand, the description language synthesis is based on the syntax of AutomationML, and on the other hand, the semantics are determined by the context of computer-based I and C in nuclear power plants and structured utilising the general product, function, and location structures of standard IEC 81346. When modelling I and C failure combinations in addition to event sequences, the description language is completed by an event structure, for which CDL is utilised for the conceptualisation and the formalisation is accomplished with PSL. The PSL formalisation allows for implementing the description language in a knowledge-based system, so that automated engineering is enabled. The I and C modelling, as part of the method, is embedded in the IEC 61513 I and C safety life-cycle and is realised in two steps. Consequently, the I and C design can be analysed at both plant and system level. For the I and C design analysis the concepts of the D3-analysis, FTA, ETA, and FMEA are combined. The thesis is concluded with an example applying the description language and method to the modernisation of a reactor protection system; this illustrates the validation of the overall concept developed in this thesis.

  6. Description langugage for the modelling and analysis of temporal change of instrumentation and control system structures

    Energy Technology Data Exchange (ETDEWEB)

    Goering, Markus Heinrich

    2013-10-25

    comprehensive requirements for the superposition of event sequences and failure combinations. For this reason, the synthesis of a description language, under consideration of the aforementioned challenges, is necessary; supplemented by a method utilising the description language for efficient engineering and I and C design analysis. Due to the abstraction of AutomationML as a meta-metamodel, it is utilised as the basis for the description language synthesis, however AutomationML also does not fulfil all target criteria. On one hand, the description language synthesis is based on the syntax of AutomationML, and on the other hand, the semantics are determined by the context of computer-based I and C in nuclear power plants and structured utilising the general product, function, and location structures of standard IEC 81346. When modelling I and C failure combinations in addition to event sequences, the description language is completed by an event structure, for which CDL is utilised for the conceptualisation and the formalisation is accomplished with PSL. The PSL formalisation allows for implementing the description language in a knowledge-based system, so that automated engineering is enabled. The I and C modelling, as part of the method, is embedded in the IEC 61513 I and C safety life-cycle and is realised in two steps. Consequently, the I and C design can be analysed at both plant and system level. For the I and C design analysis the concepts of the D3-analysis, FTA, ETA, and FMEA are combined. The thesis is concluded with an example applying the description language and method to the modernisation of a reactor protection system; this illustrates the validation of the overall concept developed in this thesis.

  7. Effects of thermocouple installation and location on fuel rod temperature measurements

    International Nuclear Information System (INIS)

    McCormick, R.D.

    1983-01-01

    This paper describes the results of analyses of nuclear fuel rod cladding temperature data obtained during in-reactor experiments under steady state and transient (simulated loss-of-coolant accident) operating conditions. The objective of the analyses was to determine the effect of thermocouple attachment method and location on measured thermal response. The use of external thermocouples increased the time to critical heat flux (CHF), reduced the blowdown peak temperature, and enhanced rod quench. A comparison of laser welded and resistance welded external thermocouple responses showed that the laser welding technique reduced the indicated cladding steady state temperatures and provided shorter time-to-CHF. A comparison of internal welded and embedded thermocouples indicated that the welded technique gave generally unsatisfactory cladding temperature measurements. The embedded thermocouple gave good, consistent results, but was possibly more fragile than the welded thermocouples. Detailed descriptions of the thermocouple designs, attachment methods and locations, and test conditions are provided

  8. The original descriptions of reptiles and their subspecies.

    Science.gov (United States)

    Uetz, Peter; Stylianou, Alexandrea

    2018-01-24

    By August 2017 an estimated 13,047 species and subspecies of extant reptiles have been described by a total of 6,454 papers and books which are listed in a supplementary file. For 1,052 species a total of 2,452 subspecies (excluding nominate subspecies) had been described by 2017, down from 1,295 species and 4,411 subspecies in 2009, due to the elevation of many subspecies to species. Here we summarize the history of these taxon description beginning with Linnaeus in 1758. While it took 80 years to reach the first 1,000 species in 1838, new species and subspecies descriptions since then have been added at a roughly constant rate of 1000 new taxa every 12-17 years. The only exception were the decades during World Wars I and II and the beginning of this millennium when the rate of descriptions increased to now about 7 years for the last 1,000 taxa. The top 101 most productive herpetologists (in terms of "taxon output") have described more than 8,000 species and subspecies, amounting to over 60% of all currently valid taxa. More than 90% of all species were described in either English (68.2%), German (12.7%) or French (9.3%).

  9. A note on a profit maximizing location model

    NARCIS (Netherlands)

    S. Zhang (Shuzhong)

    1997-01-01

    textabstractIn this paper we discuss a locational model with a profit-maximizing objective. The model can be illustrated by the following situation. There is a set of potential customers in a given region. A firm enters the market and wants to sell a certain product to this set of customers. The

  10. Description of carcass classification goals and the current situation in South Africa

    OpenAIRE

    Webb, E.C.

    2015-01-01

    Carcass classification is an essential part of efficient animal production, price fixing and meeting consumer demands. Carcass classification (or grading) is based on the description of carcasses by means of clearly defined characteristics that are of prime importance to the meat industry, retailers and consumers. Significant variation exists in carcass composition and quality due to the effects of species, age, maturity type, sex and interaction effects with animal production systems. A numb...

  11. 48 CFR 1910.004-70 - Brand name products or equal.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 6 2010-10-01 2010-10-01 true Brand name products or... GOVERNORS ACQUISITION PLANNING SPECIFICATIONS, STANDARDS, AND OTHER PURCHASE DESCRIPTIONS 1910.004-70 Brand... below. (b) Citing brand name products. Brand name or equal purchase descriptions shall cite all brand...

  12. Innovative processes impact on the factors optimal number formation of the enterprise location

    OpenAIRE

    Franiv Ihor Andriiovych

    2014-01-01

    The aim of the article. Determination of the factors to locate enterprises for searching optimal location place, therefore grounding enterprise location place with one or several factors one should consider innovative development nowadays. The results of the analysis. The branches referring to this or that production group will always have relative character and will concern time period, because – various factors value can be changed under influence of innovation introduction. Technologica...

  13. Hanford Waste Vitrification Plant quality assurance program description: Overview and applications

    International Nuclear Information System (INIS)

    Caplinger, W.H.

    1990-12-01

    This document describes the Hanford Waste Vitrification Plant Project Quality Assurance Program. This program is being implemented to ensure the acceptability of high-level radioactive canistered waste forms produced by the Hanford Waste Vitrification Plant for disposal in a licensed federal repository. The Hanford Waste Vitrification Plant Quality Assurance Program is comprised of this Quality Assurance Program Description as well as the associated contractors' quality assurance programs. The objective of this Quality Assurance Program Description is to provide the Hanford Waste Vitrification Plant Project participants with guidance and direction for program implementation while satisfying the US Department of Energy Office of Civilian Radioactive Waste Management needs in repository licensing activities with regard to canistered waste forms. To accomplish this objective, this description will be prepared in three parts: Part 1 - Overview and applications document; Part 2 - Development and qualification of the canistered waste form; Part 3 - Production of canistered waste forms. Part 1 describes the background, strategy, application, and content of the Hanford Waste Vitrification Plant Quality Assurance Program. This Quality Assurance Program Description, when complete, is designed to provide a level of confidence in the integrity of the canistered waste forms. 8 refs

  14. Description of the advanced gas cooled type of reactor (AGR)

    Energy Technology Data Exchange (ETDEWEB)

    Nonboel, E. [Risoe National Lab., Roskilde (Denmark)

    1996-11-01

    The present report comprises a technical description of the Advanced Gas cooled Reactor (AGR), a reactor type which has only been built in Great Britain. 14 AGR reactors have been built, located at 6 different sites and each station is supplied with twin-reactors. The Torness AGR plant on the Lothian coastline of Scotland, 60 km east of Edinburgh, has been chosen as the reference plant and is described in some detail. Data on the other 6 stations, Dungeness B, Hinkely Point B, Hunterston G, Hartlepool, Heysham I and Heysham II, are given only in tables with a summary of design data. Where specific data for Torness AGR has not been available, corresponding data from other AGR plans has been used, primarily from Heysham II, which belongs to the same generation of AGR reactors. The information presented is based on the open literature. The report is written as a part of the NKS/RAK-2 subproject 3: `Reactors in Nordic Surroundings`, which comprises a description of nuclear power plants neighbouring the Nordic countries. (au) 11 refs.

  15. Description of the advanced gas cooled type of reactor (AGR)

    International Nuclear Information System (INIS)

    Nonboel, E.

    1996-11-01

    The present report comprises a technical description of the Advanced Gas cooled Reactor (AGR), a reactor type which has only been built in Great Britain. 14 AGR reactors have been built, located at 6 different sites and each station is supplied with twin-reactors. The Torness AGR plant on the Lothian coastline of Scotland, 60 km east of Edinburgh, has been chosen as the reference plant and is described in some detail. Data on the other 6 stations, Dungeness B, Hinkely Point B, Hunterston G, Hartlepool, Heysham I and Heysham II, are given only in tables with a summary of design data. Where specific data for Torness AGR has not been available, corresponding data from other AGR plans has been used, primarily from Heysham II, which belongs to the same generation of AGR reactors. The information presented is based on the open literature. The report is written as a part of the NKS/RAK-2 subproject 3: 'Reactors in Nordic Surroundings', which comprises a description of nuclear power plants neighbouring the Nordic countries. (au) 11 refs

  16. 27 CFR 46.243 - Articles at multiple locations.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 2 2010-04-01 2010-04-01 false Articles at multiple... Cigarette Tubes Held for Sale on April 1, 2009 Records § 46.243 Articles at multiple locations. The dealer must maintain a list of all places where the dealer holds articles subject to the floor stocks tax...

  17. Sustainable use of marine resources through offshore wind and mussel farm co-location

    DEFF Research Database (Denmark)

    Di Tullio, Giacomo R.; Mariani, Patrizio; Benassai, Guido

    2018-01-01

    wind farms and open-water mussel cultivation. An index of co-location sustainability (SI) was developed based on the application of MCE technique constructed with physical and biological parameters on the basis of remote-sensing data. The relevant physical factors considered were wind velocity, depth...... range, concerning the site location for energy production, and sea surface temperature anomaly. The biological variables used were Chlorofill-a (as a measurement of the productivity) and Particle Organic Carbon(POC) concentration, in order to assess their influence on the probable benefits and complete...

  18. Perception of dimethyl sulfide (DMS) by loggerhead sea turtles: a possible mechanism for locating high-productivity oceanic regions for foraging.

    Science.gov (United States)

    Endres, Courtney S; Lohmann, Kenneth J

    2012-10-15

    During their long-distance migrations, sea turtles of several species feed on jellyfish and other invertebrates that are particularly abundant in ocean regions characterized by high productivity. An ability to distinguish productive oceanic regions from other areas, and to concentrate foraging activities in locations where prey density is highest, might therefore be adaptive. The volatile compound dimethyl sulfide (DMS) accumulates in the air above productive ocean areas such as upwelling and frontal zones. In principle, DMS might therefore serve as an indicator of high prey density for turtles. To determine whether turtles perceive DMS, juvenile loggerhead sea turtles (Caretta caretta) were placed into a water-filled arena in which DMS and other odorants could be introduced to the air above the water surface. Turtles exposed to air that had passed over a cup containing 10 nmol l(-1) DMS spent more time at the surface with their noses out of the water than control turtles, which were exposed to air that had passed over a cup containing distilled water. Odors that do not occur in the sea (cinnamon, jasmine and lemon) did not elicit increased surface time, implying that the response to DMS is unlikely to reflect a generalized response to any novel odor. The results demonstrate for the first time that sea turtles can detect DMS, an ability that might enable the identification of favorable foraging areas.

  19. Coarse-grained description of cosmic structure from Szekeres models

    International Nuclear Information System (INIS)

    Sussman, Roberto A.; Gaspar, I. Delgado; Hidalgo, Juan Carlos

    2016-01-01

    We show that the full dynamical freedom of the well known Szekeres models allows for the description of elaborated 3-dimensional networks of cold dark matter structures (over-densities and/or density voids) undergoing ''pancake'' collapse. By reducing Einstein's field equations to a set of evolution equations, which themselves reduce in the linear limit to evolution equations for linear perturbations, we determine the dynamics of such structures, with the spatial comoving location of each structure uniquely specified by standard early Universe initial conditions. By means of a representative example we examine in detail the density contrast, the Hubble flow and peculiar velocities of structures that evolved, from linear initial data at the last scattering surface, to fully non-linear 10–20 Mpc scale configurations today. To motivate further research, we provide a qualitative discussion on the connection of Szekeres models with linear perturbations and the pancake collapse of the Zeldovich approximation. This type of structure modelling provides a coarse grained—but fully relativistic non-linear and non-perturbative —description of evolving large scale cosmic structures before their virialisation, and as such it has an enormous potential for applications in cosmological research

  20. European descriptions of the art and architecture of early Accra ca ...

    African Journals Online (AJOL)

    European descriptions of the art and architecture of early Accra ca. ... The fifteenth to nineteenth centuries produced some interesting art works in the coastal ... art and craft production, and acquisition of new skills by Ga craftsmen and women. ... The history of the Ga has therefore not only been determined by their natural ...

  1. Milk quality and financial management at different scales of production on dairy farms located in the south of Minas Gerais state, Brazil

    Directory of Open Access Journals (Sweden)

    Marcel Gomes Paixão

    Full Text Available ABSTRACT The objective of this study was to analyze the relationship between aspects related to financial management and scale of production with quality traits (total bacteria count - TBC; somatic cell count - SCC and composition (protein, fat, lactose, total solids, and non-fat solids of refrigerated bulk tank milk from 100 dairy farmers located in the south of Minas Gerais state, Brazil, by application of a semi-structured questionnaire. Dairy farmers were categorized according to the daily milk production: small (lower than 150 L; medium (151 to 500 L; and large (higher than 501 L. Chi-square tests and identification of possible relative risks between financial aspects and current regulation standards (Normative Instruction No. 62 of December 29, 2011, Ministry of Agriculture, Livestock and Supply associated to TBC (higher 300,000 CFU/mL and SCC (higher than 500,000 cells/mL means from bulk tank milk among different milk scales productions were performed. Bulk tanks milk composition met the legislation standards and had not differ between scales of production; however, SCC means within all scales, and TBC of small farmers had not attended the legislation standards and differences were identified (P ≤ 0.05. Regarding the financial management aspects, most farmers had no control over incomes, costs, nor calculated milk production cost, with decreased incidences as scale of production increased. Chi-square tests identified that producers that had no concern about milk quality payment bonuses had TBC means 2.95 times more likely (P ≤ 0.05 to be above the current regulations. Small dairy farmers had a greater negligence of the costs management and hygienic milk production as compared to medium and large farmers.

  2. Assessment of management alternatives for LWR wastes. Volume 3. Description of German scenarios for PWR and BWR wastes

    International Nuclear Information System (INIS)

    Santraille, S.

    1993-01-01

    This report deals with the description of a management route for PWR waste relying to a certain extent on German practices in this particular area. This description, which aims at providing input data for subsequent cost evaluation, includes all management steps which are usually implemented for solid, liquid and gaseous wastes from their production up to the interim storage of the final waste products. This study is part of an overall theoretical exercise aimed at evaluating a selection of management routes for PWR and BWR wastes based on economical and radiological criteria

  3. 41 CFR 101-29.210 - Product.

    Science.gov (United States)

    2010-07-01

    ... 41 Public Contracts and Property Management 2 2010-07-01 2010-07-01 true Product. 101-29.210... FEDERAL PROPERTY MANAGEMENT REGULATIONS SUPPLY AND PROCUREMENT 29-FEDERAL PRODUCT DESCRIPTIONS 29.2-Definitions § 101-29.210 Product. The term product is any end item, either manufactured or produced, and also...

  4. Consumer Preference and Description of Salmon in Four Northern Atlantic Countries and Association with Sensory Characteristics

    NARCIS (Netherlands)

    Green-Petersen, D.; Hyldig, G.; Sveinsdottir, K.; Schelvis-Smit, A.A.M.; Martinsdottir, E.

    2009-01-01

    The focus in this article is on the relation between consumer preference and objective description of the product profile of salmon. A consumer study of eight salmon products was carried out in Iceland, Denmark, the Netherlands, and Ireland. In addition, objective sensory profiling using a trained

  5. Consumer preference and description of salmon in four Northern Atlantic countries and association with sensory characteristics

    DEFF Research Database (Denmark)

    Green-Petersen, Ditte; Hyldig, Grethe; Sveinsdóttir, K.

    2009-01-01

    The focus in this article is on the relation between consumer preference and objective description of the product profile of salmon. A consumer study of eight salmon products was carried out in Iceland, Denmark, the Netherlands, and Ireland. In addition, objective sensory profiling using a trained...

  6. Aplikasi Pencari Lokasi Ukm Di Tembalang Menggunakan Location Based Service

    Directory of Open Access Journals (Sweden)

    Iqoniyoma Faundra

    2016-10-01

    Full Text Available SMEs (Small-Medium Enterprises is the one of economical meters in Indonesia. Research step in designing the application is to determine of main problem and purpose, analysis which covering general description, functional and non-functional need. Android base aplication to search UKM Tembalang which made for searching SMEs location, and give more information about SMEs business. UKM Tembalang is a client server base aplication which made by using java programing language with eclipse software and MySQL database. Location data will be save in database which focusing on taking coorndinate that use GPS to get map and Google Maps APIs for get the route. The use of Google Maps API service and GPS make the aplication better in taking the location coordinate.beside that, the aplication also get for searching position SMEs in Tembalang, with the aplication location searching SMEs. Keywords – SMEs; Android; Location Based Service (LBS; MySQL; GPS Abstrak - UKM (Usaha Kecil Menengah merupakan salah satu tombak perekonomian di Indonesia Aplikasi Pencari Lokasi UKM Tembalang Berbasis Android yang dibuat untuk pencarian lokasi UKM dan memberi informasi lebih tentang sebuah usaha. UKM Tembalang merupakan aplikasi berbasis client server yang dibuat dengan menggunakan bahasa pemrograman java dengan software eclipse dan menggunakan basisdata MySQL. Data lokasi kafe akan disimpan dalam basisdata yang dititik beratkan pada pengambilan koordinat yang memanfaatkan GPS untuk mendapatkan peta dan Google Maps APIs untuk mendapatkan rute. Penggunaan layanan Google Maps API dan GPS menjadikan aplikasi menjadi lebih baik dalam pengambilan koordinat lokasi. Selain itu aplikasi ini juga dapat mencari letak lokasi UKM di Tembalang, dengan adanya aplikasi pencari lokasi UKM, pengguna dapat dengan mudah menemukan UKM yang dinginkan, beserta informasi UKM yang diambil dari google maupun website dari UKM tersebut.

  7. CDMS: CAD data set system design description. Revision 1

    International Nuclear Information System (INIS)

    Gray, E.L.

    1994-01-01

    This document is intended to formalize the program design of the CAD Data Set Management System (CDMS) and to be the vehicle to communicate the design to the Engineering, Design Services, and Configuration Management organizations and the WHC IRM Analysts/Programmers. The SDD shows how the software system will be structured to satisfy the requirements identified in the WHC-SD-GN-CSRS-30005 CDMS Software Requirement Specification (SRS). It is a description of the software structure, software components, interfaces, and data that make up the CDMS System. The design descriptions contained within this document will describe in detail the software product that will be developed to assist the aforementioned organizations for the express purpose of managing CAD data sets associated with released drawings, replacing the existing locally developed system and laying the foundation for automating the configuration management

  8. Demonstration of the Robotic Gamma Locating and Isotopic Identification Device

    International Nuclear Information System (INIS)

    Anderson, M.O.; Conner, C.C.; Daniel, V.E.; McKay, M.D.; Yancey, N.A.

    2002-01-01

    The United States Department of Energy (DOE) continually seeks safer and more cost-effective technologies for use in decontaminating and decommissioning nuclear facilities. To this end, the Deactivation and Decommissioning Focus Area of DOE's Office of Science and Technology sponsors Large-Scale Demonstration and Deployment Projects (LSDDP) to test new technologies. As part of these projects, developers and vendors showcase new products designed to decrease health and safety risks to personnel and the environment, increase productivity, and lower costs. As part of the FY 2000 and 2001 LSDDP, the Idaho National Engineering and Environmental Laboratory (INEEL) collaborated with the Russian Research and Development Institute of Construction Technology (NIKIMT). This collaboration resulted in the development of the Robotic Gamma Locating and Isotopic Identification Device (RGL and IID) which integrated DOE Robotics Crosscutting (Rbx) technology with NIKIMT Russian gamma locating and isotopic identification technology. This paper will discuss the technologies involved in this integration and results from the demonstration including reduction of personnel exposure, increase in productivity, and reduced risk

  9. International operations and location decisions: A firm-level approach

    NARCIS (Netherlands)

    Meijboom, Bert; Voordijk, Johannes T.

    2003-01-01

    The purpose of this study is to acquire a better understanding of why certain production and distribution facilities remain in Western Europe, in spite of economic globalisation. This paper focuses on companies located in the Netherlands but acting on an international scale. The issue is not

  10. Description of climate, surface hydrology, and near-surface hydrogeology. Preliminary site description. Forsmark area - version 1.2

    International Nuclear Information System (INIS)

    Johansson, Per-Olof; Werner, Kent; Bosson, Emma; Berglund, Sten; Juston, John

    2005-06-01

    The present report is a background report describing the meteorological conditions and the modelling of surface hydrology and near-surface hydrogeology in support of the Forsmark version 1.2 SDM based on the data available in the Forsmark 1.2 ''data freeze'' (July 31, 2004). The area covered in the conceptual and descriptive modelling is characterised by a low relief and a small-scale topography. Almost the whole area is located below 20 m a s l (metres above sea level). The corrected mean annual precipitation is 600-650 mm and the mean annual evapotranspiration can be estimated to a little more than 400 mm, leaving approximately 200 mm x year-1 for runoff. Till is the dominating Quaternary deposit covering approximately 75% of the area. In most of the area, the till is sandy. Bedrock outcrops are frequent but cover only approximately 5% of the area. Direct groundwater recharge from precipitation is the dominant source of groundwater recharge. The small-scale topography implies that many local, shallow groundwater flow systems are formed in the Quaternary deposits, overlaying more large-scale flow systems associated with groundwater flows at greater depths. Groundwater level time series from wells in till and bedrock within the same areas show a considerably higher groundwater level in the till than in the bedrock. The sediment stratigraphy of lakes and wetlands is crucial for their function as discharge areas for groundwater. Comparisons between measured lake water levels and groundwater levels below and around lakes indicate that the lakes in some cases may act as sources of groundwater recharge. Specifically, observations from Lake Bolundsfjaerden and Lake Eckarfjaerden show that such conditions were at hand during the dry summer of 2003. However, whether the observed water level relations correspond to significant water fluxes depends also on the hydrogeological properties of the lake sediments and the underlying Quaternary deposits. ''Old'' water with high

  11. Algorithm for locating the extremum of a multi-dimensional constrained function and its application to the PPPL Hybrid Study

    International Nuclear Information System (INIS)

    Bathke, C.

    1978-03-01

    A description is presented of a general algorithm for locating the extremum of a multi-dimensional constrained function. The algorithm employs a series of techniques dominated by random shrinkage, steepest descent, and adaptive creeping. A discussion follows of the algorithm's application to a ''real world'' problem, namely the optimization of the price of electricity, P/sub eh/, from a hybrid fusion-fission reactor. Upon the basis of comparisons with other optimization schemes of a survey nature, the algorithm is concluded to yield a good approximation to the location of a function's optimum

  12. A Framework for International Location Decisions for Manufacturing Firms Published in Production Engineering

    DEFF Research Database (Denmark)

    Schmidt, Andreas Strøjer Tynan; Touray, Ebou; Herbert-Hansen, Zaza Nadja Lee

    2017-01-01

    The purpose of this paper is to address current shortcomings in international location decisions (ILD), which were identified through an exploratory study, by developing a model that addresses previous limitations in research and encapsulate an adequate theories and frameworks. Based on insights ...

  13. Location of leaks in pressurized underground pipelines

    International Nuclear Information System (INIS)

    Eckert, E.G.; Maresca, J.W. Jr.

    1993-01-01

    Millions of underground storage tanks (UST) are used to store petroleum and other chemicals. The pressurized underground pipelines associated with USTs containing petroleum motor fuels are typically 2 in. in diameter and 50 to 200 ft in length. These pipelines typically operate at pressures of 20 to 30 psi. Longer lines, with diameters up to 4 in., are found in some high-volume facilities. There are many systems that can be used to detect leaks in pressurized underground pipelines. When a leak is detected, the first step in the remediation process is to find its location. Passive-acoustic measurements, combined with advanced signal-processing techniques, provide a nondestructive method of leak location that is accurate and relatively simple, and that can be applied to a wide variety of pipelines and pipeline products

  14. Production conditions of bioenergy in Swedish agriculture; Produktionsfoerutsaettningar foer biobraenslen inom svenskt jordbruk

    Energy Technology Data Exchange (ETDEWEB)

    Boerjesson, Paal

    2007-05-15

    The overall aim of this report is to analyse and describe the production conditions of bioenergy in Swedish agriculture and how these conditions can vary due to different factors. The conclusion is that the potential for producing bioenergy in Swedish agriculture will vary significantly depending on which energy crops are cultivated, which type of agricultural land is utilised and the geographical location of the production. Furthermore, different crop residues and other by-products from agriculture, utilised for energy purposes, will affect the bioenergy potential. To which extent this physical/biological potential will be utilised in the future depends mainly on economic conditions and financial considerations. These aspects are not included in this study. The report starts with a description of current crop production in Sweden, expressed in energy terms, the energy needed for this production and the regional variation in crop yields. The local variations in cultivation conditions are also analysed, as well as variations over the area of a single farm. Another aspect discussed is the production conditions of energy crops on previous farm land not currently utilised. The report includes an analysis of the potential supply of crop residues and other by-products for energy purposes, such as straw, tops and leaves of sugar beets, manure etc, as well as the regional variation of these residues and by-products. A similar analysis is made of the regional production conditions and potential biomass yields of traditional crops and new energy crops. These analyses also include energy balance calculations showing the energy input needed for different production systems in relation to the harvested biomass yield, and the potential for increased biomass yields in the future. Based on the findings of these various analyses, calculations are made showing some examples of how much bioenergy Swedish agriculture can deliver, depending on how much agricultural land is utilised for

  15. Site description of Laxemar at completion of the site investigation phase. SDM-Site Laxemar

    Energy Technology Data Exchange (ETDEWEB)

    2009-12-15

    The Swedish Nuclear Fuel and Waste Management Company (SKB) has undertaken site characterisation in two different areas, Forsmark and Laxemar-Simpevarp, in order to identify a suitable location for a geological repository of spent nuclear fuel according to the KBS-3 method. The site investigations have been conducted in campaigns, punctuated by data freezes. After each data freeze, the site data have been analysed and modelling has been carried out with the overall purpose to develop a site descriptive model (SDM). The site descriptive model is used by repository engineering to design the underground facility and to develop a repository layout adapted to the site. It is also essential for safety assessment, since the SDM is the only source for site-specific input. Another important use of the site descriptive model is in the environmental impact assessment. An SDM is an integrated model of geology, thermal properties, rock mechanics, hydrogeology, hydrogeochemistry, bedrock transport properties and a description of the surface system. The site descriptive model compiled in the current report, SDM-Site Laxemar, presents an integrated understanding of the Laxemar-Simpevarp area (with special emphasis on the Laxemar subarea) at the completion of the surface-based investigations, which were conducted during the period 2002 to 2007. A summary is also provided of the abundant underlying data and the discipline specific models that support the site understanding. The description relies heavily on background reports that address, in particular, details of the data analyses and modelling of the different disciplines. The Laxemar-Simpevarp area is located in the province of Smaaland within the municipality of Oskarshamn, about 230 km south of Stockholm. The candidate area for site investigation is located along the shoreline of the strait of Kalmarsund, within a 1.8 billion year old suite of well preserved bedrock belonging to the Transscandinavian Igneous Belt formed during

  16. Site description of Laxemar at completion of the site investigation phase. SDM-Site Laxemar

    International Nuclear Information System (INIS)

    2009-12-01

    The Swedish Nuclear Fuel and Waste Management Company (SKB) has undertaken site characterisation in two different areas, Forsmark and Laxemar-Simpevarp, in order to identify a suitable location for a geological repository of spent nuclear fuel according to the KBS-3 method. The site investigations have been conducted in campaigns, punctuated by data freezes. After each data freeze, the site data have been analysed and modelling has been carried out with the overall purpose to develop a site descriptive model (SDM). The site descriptive model is used by repository engineering to design the underground facility and to develop a repository layout adapted to the site. It is also essential for safety assessment, since the SDM is the only source for site-specific input. Another important use of the site descriptive model is in the environmental impact assessment. An SDM is an integrated model of geology, thermal properties, rock mechanics, hydrogeology, hydrogeochemistry, bedrock transport properties and a description of the surface system. The site descriptive model compiled in the current report, SDM-Site Laxemar, presents an integrated understanding of the Laxemar-Simpevarp area (with special emphasis on the Laxemar subarea) at the completion of the surface-based investigations, which were conducted during the period 2002 to 2007. A summary is also provided of the abundant underlying data and the discipline specific models that support the site understanding. The description relies heavily on background reports that address, in particular, details of the data analyses and modelling of the different disciplines. The Laxemar-Simpevarp area is located in the province of Smaaland within the municipality of Oskarshamn, about 230 km south of Stockholm. The candidate area for site investigation is located along the shoreline of the strait of Kalmarsund, within a 1.8 billion year old suite of well preserved bedrock belonging to the Transscandinavian Igneous Belt formed during

  17. Manufacturing plant location selection in logistics network using Analytic Hierarchy Process

    Directory of Open Access Journals (Sweden)

    Ping-Yu Chang

    2015-11-01

    Full Text Available Purpose: In recent years, numerous companies have moved their manufacturing plants to China to capitalize on lower cost and tax. Plant location has such an impact on cost, stocks, and logistics network but location selection in the company is usually based on subjective preference of high ranking managers. Such a decision-making process might result in selecting a location with a lower fixed cost but a higher operational cost. Therefore, this research adapts real data from an electronics company to develop a framework that incorporates both quantitative and qualitative factors for selecting new plant locations. Design/methodology/approach: In-depth interviews were conducted with 12 high rank managers (7 of them are department manager, 2 of them are vice-president, 1 of them is senior engineer, and 2 of them are plant manager in the departments of construction, finance, planning, production, and warehouse to determine the important factors. A questionnaire survey is then conducted for comparing factors which are analyzed using the Analytic Hierarchy Process (AHP. Findings: Results show that the best location chosen by the developed framework coincides well with the company’s primal production base. The results have been presented to the company’s high ranking managers for realizing the accuracy of the framework. Positive responses of the managers indicate usefulness of implementing the proposed model into reality, which adds to the value of this research. Practical implications: The proposed framework can save numerous time-consuming meetings called to compromise opinions and conflictions from different departments in location selection. Originality/value: This paper adapts the Analytic Hierarchy Process (AHP to incorporate quantitative and qualitative factors which are obtained through in-depth interviews with high rank managers in a company into the location decision.

  18. Surface Environmental Surveillance Project: Locations Manual Volume 1 – Air and Water Volume 2 – Farm Products, Soil & Vegetation, and Wildlife

    Energy Technology Data Exchange (ETDEWEB)

    Fritz, Brad G.; Patton, Gregory W.; Stegen, Amanda; Poston, Ted M.

    2009-01-01

    This report describes all environmental monitoring locations associated with the Surface Environmental Surveillance Project. Environmental surveillance of the Hanford site and surrounding areas is conducted by the Pacific Northwest National Laboratory (PNNL) for the U.S. Department of Energy (DOE). Sampling is conducted to evaluate levels of radioactive and nonradioactive pollutants in the Hanford environs, as required in DOE Order 450.1, Environmental Protection Program, and DOE Order 5400.5, Radiation Protection of the Public and the Environment. The environmental surveillance sampling design is described in the Hanford Site Environmental Monitoring Plan, United States Department of Energy, Richland Operation Office (DOE/RL-91-50). This document contains the locations of sites used to collect samples for the Surface Environmental Surveillance Project (SESP). Each section includes directions, maps, and pictures of the locations. A general knowledge of roads and highways on and around the Hanford Site is necessary to successfully use this manual. Supplemental information (Maps, Gazetteer, etc.) may be necessary if user is unfamiliar with local routes. The SESP is a multimedia environmental surveillance effort to measure the concentrations of radionuclides and chemicals in environmental media to demonstrate compliance with applicable environmental quality standards and public exposure limits, and assessing environmental impacts. Project personnel annually collect selected samples of ambient air, surface water, agricultural products, fish, wildlife, and sediments. Soil and vegetation samples are collected approximately every 5 years. Analytical capabilities include the measurement of radionuclides at very low environmental concentrations and, in selected media, nonradiological chemicals including metals, anions, volatile organic compounds, and total organic carbon.

  19. Quadrant I description of current conditions

    International Nuclear Information System (INIS)

    1990-09-01

    In accordance with the requirements of the Consent Decree issued by the Ohio Attorney General's office on August 29, 1989 and with the RCRA Section 3008(h) Consent Order issued by the US Environmental Protection Agency, Region V (USEPA) on September 29, 1989, this report, which provides a Description of Current Conditions within Quadrant I of the Portsmouth Gaseous Diffusion Plant (PORTS) located in Piketon, Ohio, has been developed and submitted for approval. The objectives of this report are to provide data concerning: (1) the current state of knowledge of the environmental setting of Quadrant I of PORTS including ground water, surface water, soil and air; and (2) the extent of known, potential and suspected contamination of these segments of the environment in Quadrant I of the facility. This report is the initial step in the comprehensive RCRA Facility Investigation (RFI) currently underway at PORTS, and will provide a foundation for all subsequent activities related to the RFI in Quadrant I

  20. A set of particle locating algorithms not requiring face belonging to cell connectivity data

    Science.gov (United States)

    Sani, M.; Saidi, M. S.

    2009-10-01

    Existing efficient directed particle locating (host determination) algorithms rely on the face belonging to cell relationship (F2C) to find the next cell on the search path and the cell in which the target is located. Recently, finite volume methods have been devised which do not need F2C. Therefore, existing search algorithms are not directly applicable (unless F2C is included). F2C is a major memory burden in grid description. If the memory benefit from these finite volume methods are desirable new search algorithms should be devised. In this work two new algorithms (line of sight and closest cell) are proposed which do not need F2C. They are based on the structure of the sparse coefficient matrix involved (stored for example in the compressed row storage, CRS, format) to determine the next cell. Since F2C is not available, testing a cell for the presence of the target is not possible. Therefore, the proposed methods may wrongly mark a nearby cell as the host in some rare cases. The issue of importance of finding the correct host cell (not wrongly hitting its neighbor) is addressed. Quantitative measures are introduced to assess the efficiency of the methods and comparison is made for typical grid types used in computational fluid dynamics. In comparison, the closest cell method, having a lower computational cost than the family of line of sight and the existing efficient maximum dot product methods, gives a very good performance with tolerable and harmless wrong hits. If more accuracy is needed, the method of approximate line of sight then closest cell (LS-A-CC) is recommended.

  1. Semiclassical description of soliton-antisoliton pair production in particle collisions

    Energy Technology Data Exchange (ETDEWEB)

    Demidov, S.V.; Levkov, D.G. [Institute for Nuclear Research of the Russian Academy of Sciences,60th October Anniversary prospect 7a, Moscow 117312 (Russian Federation)

    2015-11-10

    We develop a consistent semiclassical method to calculate the probability of topological soliton-antisoliton pair production in collisions of elementary particles. In our method one adds an auxiliary external field pulling the soliton and antisoliton in the opposite directions. This transforms the original scattering process into a Schwinger pair creation of the solitons induced by the particle collision. One describes the Schwinger process semiclassically and recovers the original scattering probability in the limit of vanishing external field. We illustrate the method in (1+1)-dimensional scalar field model where the suppression exponents of soliton-antisoliton production in the multiparticle and two-particle collisions are computed numerically.

  2. Technical description of the burn-up software system MOP

    International Nuclear Information System (INIS)

    Schutte, C.K.

    1991-05-01

    The burn-up software system MOP is a research tool primary intended to study the behaviour of fission products in any reactor composition. Input data are multi-group cross-sections and data concerning the nuclide chains. An option is available to calculate a fundamental mode neutron spectrum for the specified reactor composition. A separate program can test the consistency of the specified nuclide chains. Options are available to calculate time-dependent cross-sections of lumped fission products and to take account of the leakage of gaseous fission products from the reactor core. The system is written in FORTRAN77 for a CYBER computer, using the operating system NOS/BE. The report gives a detailed technical description of the applied algorithms and the flow and storage of data. Information is provided for adapting the system to other computer configurations. (author). 5 refs.; 11 figs

  3. Sustainable hydrogen production

    Energy Technology Data Exchange (ETDEWEB)

    Block, D.L.; Linkous, C.; Muradov, N.

    1996-01-01

    This report describes the Sustainable Hydrogen Production research conducted at the Florida Solar Energy Center (FSEC) for the past year. The report presents the work done on the following four tasks: Task 1--production of hydrogen by photovoltaic-powered electrolysis; Task 2--solar photocatalytic hydrogen production from water using a dual-bed photosystem; Task 3--development of solid electrolytes for water electrolysis at intermediate temperatures; and Task 4--production of hydrogen by thermocatalytic cracking of natural gas. For each task, this report presents a summary, introduction/description of project, and results.

  4. Methodological quality and descriptive characteristics of prosthodontic-related systematic reviews.

    Science.gov (United States)

    Aziz, T; Compton, S; Nassar, U; Matthews, D; Ansari, K; Flores-Mir, C

    2013-04-01

    Ideally, healthcare systematic reviews (SRs) should be beneficial to practicing professionals in making evidence-based clinical decisions. However, the conclusions drawn from SRs are directly related to the quality of the SR and of the included studies. The aim was to investigate the methodological quality and key descriptive characteristics of SRs published in prosthodontics. Methodological quality was analysed using the Assessment of Multiple Reviews (AMSTAR) tool. Several electronic resources (MEDLINE, EMBASE, Web of Science and American Dental Association's Evidence-based Dentistry website) were searched. In total 106 SRs were located. Key descriptive characteristics and methodological quality features were gathered and assessed, and descriptive and inferential statistical testing performed. Most SRs in this sample originated from the European continent followed by North America. Two to five authors conducted most SRs; the majority was affiliated with academic institutions and had prior experience publishing SRs. The majority of SRs were published in specialty dentistry journals, with implant or implant-related topics, the primary topics of interest for most. According to AMSTAR, most quality aspects were adequately fulfilled by less than half of the reviews. Publication bias and grey literature searches were the most poorly adhered components. Overall, the methodological quality of the prosthodontic-related systematic was deemed limited. Future recommendations would include authors to have prior training in conducting SRs and for journals to include a universal checklist that should be adhered to address all key characteristics of an unbiased SR process. © 2013 Blackwell Publishing Ltd.

  5. Toyota production system beyond large-scale production

    CERN Document Server

    Ohno, Taiichi

    1998-01-01

    In this classic text, Taiichi Ohno--inventor of the Toyota Production System and Lean manufacturing--shares the genius that sets him apart as one of the most disciplined and creative thinkers of our time. Combining his candid insights with a rigorous analysis of Toyota's attempts at Lean production, Ohno's book explains how Lean principles can improve any production endeavor. A historical and philosophical description of just-in-time and Lean manufacturing, this work is a must read for all students of human progress. On a more practical level, it continues to provide inspiration and instruction for those seeking to improve efficiency through the elimination of waste.

  6. Lithomorphological aspects of northern Muria region for location candidate of the NPP radioactive wastes repository

    International Nuclear Information System (INIS)

    Sucipta

    1995-01-01

    As a part of planning and construction of NPP in the northern Muria region, a location candidate of the NPP radioactive waste repository needs to be prepared. The objective of this studywas to investigate the suitability of the geomorphologic condition of the northern Muria region for the location. The geomorphologic elements were evaluated based on the geomorphologic criteria specified by the IAEA. This study was conducted through descriptive and scoring methods for the geomorphologic elements, especially the landform and the geomorphologic processes. Based on the results of the study, the study area could be classified into three classes of suitability for the location. These are three geomorphologic units of high suitability, three units of moderate suitability and four units of low suitability. By considering the total value of the geomorphologic condition suitability and the inhibiting factors of geomorphology, three high suitability units were selected, particularly in the region of Lemahabang and Genggrengan. (author). 6 refs, 7 figs

  7. Using Qualitative Metasummary to Synthesize Qualitative and Quantitative Descriptive Findings

    OpenAIRE

    Sandelowski, Margarete; Barroso, Julie; Voils, Corrine I.

    2007-01-01

    The new imperative in the health disciplines to be more methodologically inclusive has generated a growing interest in mixed research synthesis, or the integration of qualitative and quantitative research findings. Qualitative metasummary is a quantitatively oriented aggregation of qualitative findings originally developed to accommodate the distinctive features of qualitative surveys. Yet these findings are similar in form and mode of production to the descriptive findings researchers often ...

  8. 41 CFR 101-29.213 - Commercial product.

    Science.gov (United States)

    2010-07-01

    ... 41 Public Contracts and Property Management 2 2010-07-01 2010-07-01 true Commercial product. 101... Regulations System FEDERAL PROPERTY MANAGEMENT REGULATIONS SUPPLY AND PROCUREMENT 29-FEDERAL PRODUCT DESCRIPTIONS 29.2-Definitions § 101-29.213 Commercial product. A commercial product is any item, component, or...

  9. Potential bioethanol feedstock availability around nine locations in the Republic of Ireland

    International Nuclear Information System (INIS)

    Deverell, R.; McDonnell, K.; Devlin, G.

    2009-01-01

    The Republic of Ireland, like many other countries is trying to diversify energy sources to counteract environmental, political and social concerns. Bioethanol from domestically grown agricultural crops is an indigenously produced alternative fuel that can potentially go towards meeting the goal of diversified energy supply. The Republic of Ireland's distribution of existing soils and agricultural land-uses limit arable crop land to around 10% of total agricultural area. Demand for land to produce arable crops is expected to decrease, which could open the opportunity for bioethanol production. Bioethanol production plants are required to be of a sufficient scale in order to compete economically with other fuel sources, it is important therefore to determine if enough land exists around potential ethanol plant locations to meet the potential demands for feedstock. This study determines, through the use of a developed GIS based model, the potential quantities of feedstock that is available in the hinterlands of nine locations in the Republic of Ireland. The results indicate that three locations can meet all its feedstock demands using indigenously grown sugarbeet, while only one location can meet its demands using a combination of indigenous wheat and straw as the two locally sourced feedstocks. (author)

  10. Matrix product state description of Halperin states

    Science.gov (United States)

    Crépel, V.; Estienne, B.; Bernevig, B. A.; Lecheminant, P.; Regnault, N.

    2018-04-01

    Many fractional quantum Hall states can be expressed as a correlator of a given conformal field theory used to describe their edge physics. As a consequence, these states admit an economical representation as an exact matrix product state (MPS) that was extensively studied for the systems without any spin or any other internal degrees of freedom. In that case, the correlators are built from a single electronic operator, which is primary with respect to the underlying conformal field theory. We generalize this construction to the archetype of Abelian multicomponent fractional quantum Hall wave functions, the Halperin states. These can be written as conformal blocks involving multiple electronic operators and we explicitly derive their exact MPS representation. In particular, we deal with the caveat of the full wave-function symmetry and show that any additional SU(2) symmetry is preserved by the natural MPS truncation scheme provided by the conformal dimension. We use our method to characterize the topological order of the Halperin states by extracting the topological entanglement entropy. We also evaluate their bulk correlation lengths, which are compared to plasma analogy arguments.

  11. Commercial milk distribution profiles and production locations. Hanford Environmental Dose Reconstruction Project

    Energy Technology Data Exchange (ETDEWEB)

    Deonigi, D.E.; Anderson, D.M.; Wilfert, G.L.

    1994-04-01

    The Hanford Environmental Dose Reconstruction (HEDR) Project was established to estimate radiation doses that people could have received from nuclear operations at the Hanford Site since 1944. For this period iodine-131 is the most important offsite contributor to radiation doses from Hanford operations. Consumption of milk from cows that ate vegetation contaminated by iodine-131 is the dominant radiation pathway for individuals who drank milk (Napier 1992). Information has been developed on commercial milk cow locations and commercial milk distribution during 1945 and 1951. The year 1945 was selected because during 1945 the largest amount of iodine-131 was released from Hanford facilities in a calendar year (Heeb 1993); therefore, 1945 was the year in which an individual was likely to have received the highest dose. The year 1951 was selected to provide data for comparing the changes that occurred in commercial milk flows (i.e., sources, processing locations, and market areas) between World War II and the post-war period. To estimate the doses people could have received from this milk flow, it is necessary to estimate the amount of milk people consumed, the source of the milk, the specific feeding regime used for milk cows, and the amount of iodine-131 contamination deposited on feed.

  12. An Integrated Assessment of Location-Dependent Scaling for Microalgae Biofuel Production Facilities

    Energy Technology Data Exchange (ETDEWEB)

    Coleman, Andre M.; Abodeely, Jared; Skaggs, Richard; Moeglein, William AM; Newby, Deborah T.; Venteris, Erik R.; Wigmosta, Mark S.

    2014-06-19

    Successful development of a large-scale microalgae-based biofuels industry requires comprehensive analysis and understanding of the feedstock supply chain—from facility siting/design through processing/upgrading of the feedstock to a fuel product. The evolution from pilot-scale production facilities to energy-scale operations presents many multi-disciplinary challenges, including a sustainable supply of water and nutrients, operational and infrastructure logistics, and economic competitiveness with petroleum-based fuels. These challenges are addressed in part by applying the Integrated Assessment Framework (IAF)—an integrated multi-scale modeling, analysis, and data management suite—to address key issues in developing and operating an open-pond facility by analyzing how variability and uncertainty in space and time affect algal feedstock production rates, and determining the site-specific “optimum” facility scale to minimize capital and operational expenses. This approach explicitly and systematically assesses the interdependence of biofuel production potential, associated resource requirements, and production system design trade-offs. The IAF was applied to a set of sites previously identified as having the potential to cumulatively produce 5 billion-gallons/year in the southeastern U.S. and results indicate costs can be reduced by selecting the most effective processing technology pathway and scaling downstream processing capabilities to fit site-specific growing conditions, available resources, and algal strains.

  13. Competition and the Location of Overseas Assembly

    OpenAIRE

    Deborah Swenson

    2006-01-01

    How does international competition affect overseas outsourcing? While it is commonly believed that international competition enables firms to desert high cost countries in favor of low wage locations, the frequency of such responses may be reduced if the movement of outsourcing activities involves sunk costs. To put these factors in perspective, I study the production decisions of participants in the U.S. overseas assembly program (OAP). A number of interesting regularities emerge. First, the...

  14. Description logics of context

    CSIR Research Space (South Africa)

    Klarman, S

    2013-05-01

    Full Text Available We introduce Description Logics of Context (DLCs) - an extension of Description Logics (DLs) for context-based reasoning. Our approach descends from J. McCarthy's tradition of treating contexts as formal objects over which one can quantify...

  15. Lost in Location

    DEFF Research Database (Denmark)

    Hansen, Lone Koefoed

    2009-01-01

    traversed. While becoming destination aware, the individual loses her location awareness. The article proposes that the reason people get lost when using sat-nav is due to a wrong location-performative paradigm. As an alternative, the article introduces and analyzes two performance-related examples...... that illustrate an alternative location-performative paradigm: Meredith Warner's Lost/Found knitting series and Etter and Schecht's Melodious Walkabout. In both examples, the artist's hand becomes the intermediary between alien and location. Thus, by exploring how wayfinding can be a poetically situated...... performance, the article examines how the growing locative media industry can learn from the location-aware performative strategies employed by artists who create situated and urban performances for the curious participant. The academic frames employed in the analysis draw on psychogeography, site...

  16. Quarkonium production in hadronic collisions

    International Nuclear Information System (INIS)

    Gavai, R.; Schuler, G.A.; Sridhar, K.

    1995-01-01

    We summarize the theoretical description of charmonium and bottonium production in hadronic collisions and compare it to the available data from hadron-nucleon interactions. With the parameters of the theory established by these data, we obtain predictions for quarkonium production at RHIC and LHC energies

  17. Protein (multi-)location prediction: using location inter-dependencies in a probabilistic framework

    Science.gov (United States)

    2014-01-01

    Motivation Knowing the location of a protein within the cell is important for understanding its function, role in biological processes, and potential use as a drug target. Much progress has been made in developing computational methods that predict single locations for proteins. Most such methods are based on the over-simplifying assumption that proteins localize to a single location. However, it has been shown that proteins localize to multiple locations. While a few recent systems attempt to predict multiple locations of proteins, their performance leaves much room for improvement. Moreover, they typically treat locations as independent and do not attempt to utilize possible inter-dependencies among locations. Our hypothesis is that directly incorporating inter-dependencies among locations into both the classifier-learning and the prediction process can improve location prediction performance. Results We present a new method and a preliminary system we have developed that directly incorporates inter-dependencies among locations into the location-prediction process of multiply-localized proteins. Our method is based on a collection of Bayesian network classifiers, where each classifier is used to predict a single location. Learning the structure of each Bayesian network classifier takes into account inter-dependencies among locations, and the prediction process uses estimates involving multiple locations. We evaluate our system on a dataset of single- and multi-localized proteins (the most comprehensive protein multi-localization dataset currently available, derived from the DBMLoc dataset). Our results, obtained by incorporating inter-dependencies, are significantly higher than those obtained by classifiers that do not use inter-dependencies. The performance of our system on multi-localized proteins is comparable to a top performing system (YLoc+), without being restricted only to location-combinations present in the training set. PMID:24646119

  18. Protein (multi-)location prediction: using location inter-dependencies in a probabilistic framework.

    Science.gov (United States)

    Simha, Ramanuja; Shatkay, Hagit

    2014-03-19

    Knowing the location of a protein within the cell is important for understanding its function, role in biological processes, and potential use as a drug target. Much progress has been made in developing computational methods that predict single locations for proteins. Most such methods are based on the over-simplifying assumption that proteins localize to a single location. However, it has been shown that proteins localize to multiple locations. While a few recent systems attempt to predict multiple locations of proteins, their performance leaves much room for improvement. Moreover, they typically treat locations as independent and do not attempt to utilize possible inter-dependencies among locations. Our hypothesis is that directly incorporating inter-dependencies among locations into both the classifier-learning and the prediction process can improve location prediction performance. We present a new method and a preliminary system we have developed that directly incorporates inter-dependencies among locations into the location-prediction process of multiply-localized proteins. Our method is based on a collection of Bayesian network classifiers, where each classifier is used to predict a single location. Learning the structure of each Bayesian network classifier takes into account inter-dependencies among locations, and the prediction process uses estimates involving multiple locations. We evaluate our system on a dataset of single- and multi-localized proteins (the most comprehensive protein multi-localization dataset currently available, derived from the DBMLoc dataset). Our results, obtained by incorporating inter-dependencies, are significantly higher than those obtained by classifiers that do not use inter-dependencies. The performance of our system on multi-localized proteins is comparable to a top performing system (YLoc+), without being restricted only to location-combinations present in the training set.

  19. Logistics Solution for Choosing Location of Production of Road Construction Enterprise

    Science.gov (United States)

    Gavrilina, I.; Bondar, A.

    2017-11-01

    The current state of construction of highways indicates that not all the resources of the construction organization are implemented and supported by the modern approaches in logistics problems solving. This article deals with the solution of these problems and considers the features of basic road linear works organization, their large extent and different locations of enterprises. Analyzing these data, it is proposed to simulate the logistics processes and substantiate the methods of transport operations organizing by linking the technology and the organization road construction materials delivery which allows one to optimize the construction processes, to choose the most economically advantageous options, and also to monitor the quality of work.

  20. Analytical calculation of heavy quarkonia production processes in computer

    International Nuclear Information System (INIS)

    Braguta, V V; Likhoded, A K; Luchinsky, A V; Poslavsky, S V

    2014-01-01

    This report is devoted to the analytical calculation of heavy quarkonia production processes in modern experiments such as LHC, B-factories and superB-factories in computer. Theoretical description of heavy quarkonia is based on the factorization theorem. This theorem leads to special structure of the production amplitudes which can be used to develop computer algorithm which calculates these amplitudes automatically. This report is devoted to the description of this algorithm. As an example of its application we present the results of the calculation of double charmonia production in bottomonia decays and inclusive the χ cJ mesons production in pp-collisions

  1. Quarter Dates Location(s) Purpose Transportation and Travel ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    IDRC CRDI

    Dates. Location(s). Purpose. Transportation and Travel. Accommodation,. Meals and Other. Hospitality. Total. Expenses. Quarter 1. May 15. Ottawa, ON. Meetings. May 20 to 21. Washington DC. Conference. 11,364.93. 3,274.71. 53.50. 14,693.14. May 5 to June 5. Kenya and England. Meetings. June 18 to 21. Winnipeg, MB.

  2. Site descriptions for preliminary radiological assessments of low-level waste repositories

    International Nuclear Information System (INIS)

    Burgess, W.E.; Jones, C.H.; Sumerling, T.J.; Ashton, J.

    1988-07-01

    The environmental contexts of four sites, previously under investigation by UK Nirex Ltd. as potential locations for low-level waste disposal facilities, are described. Information on geographical setting, climate, surface hydrology, land use, agriculture, fisheries, geology and hydrogeology is presented. The geological and hydrogeological data are interpreted with the support of deterministic modelling of groundwater conditions. The routes by which radionuclides may migrate from the site are identified and reduced to 1D statistical descriptions suitable for use in probabilistic risk assessments. Additional data required to improve the assessment of the performance of the site are identified. (author)

  3. Perceptions of clients on awareness and the geographical location of a South African university sexual health clinic.

    Science.gov (United States)

    Adams, Rukshana; Van Der Heever, Mariana M; Damons, Anneleen

    2017-09-27

    The Campus Health Service at Stellenbosch University has a sub-division, a sexual health clinic, which provides sexual health services. The clients of the sexual health clinic consist of staff members and students. This article reports on the perceptions of clients that relate to awareness and the geographical location of the clinic. The Campus Health Service at Stellenbosch University's main campus. A descriptive qualitative approach was applied utilising in-depth interviews. A sample of n = 15 was drawn through purposive sampling and data saturation was achieved with the sample. The following themes emerged from the data: location of the clinic, awareness of sexual health services and marketing and advertising. The findings of the study revealed that accessibility of the clinic is influenced by the geographical location of the clinic and that marketing and awareness of services require attention.

  4. i-Locate - Indoor/Outdoor location and Asset Management through Open Data

    Directory of Open Access Journals (Sweden)

    Claudio Eccher

    2015-02-01

    Full Text Available Studi recenti hanno evidenziato che, in media, trascorriamo circa il 90% del nostro tempo in ambienti chiusi e, spesso, non familiari. L’esigenza di localizzare/guidare persone o ogg etti in spazi sia esterni che interni (senza discontinuità tra esterno ed interno darà origine ad una serie di nuovi servizi di tipo LBS (Location-Based Services che potranno avere anche una notevole rilevanza economica. i-locate (Indoor / outdoor location and Asset Management Through open geodata is a project that aims to develop a set of tools and services based on geo location technologies based on open data for the location and management of objects in indoor and outdoor spaces. The tools are intended both to citizens who use their smartphones to access services, aids to navigation from the front door to internal destinations to buildings (public office, clinic, shop, etc.. Obtaining any information available to support (code , unforeseen changes in the path, suggestions, etc., and professionals for specific activities that require the location of people, equipment, etc. i-locate to an intense use of GIS technologies for navigation and tracking "indoor" (indoor GIS, 3D GIS, to locate people (eg. Alzheimer's patients and their movements in areas not suited (geofencing to identify and track objects / portable equipment for their location, management and maintenance.

  5. i-Locate - Indoor/Outdoor location and Asset Management through Open Data

    Directory of Open Access Journals (Sweden)

    Claudio Eccher

    2015-02-01

    Full Text Available Studi recenti hanno evidenziato che, in media, trascorriamo circa il 90% del nostro tempo in ambienti chiusi e, spesso, non familiari. L’esigenza di localizzare/guidare persone o ogg etti in spazi sia esterni che interni (senza discontinuità tra esterno ed interno darà origine ad una serie di nuovi servizi di tipo LBS (Location-Based Services che potranno avere anche una notevole rilevanza economica.i-locate (Indoor / outdoor location and Asset Management Through open geodata is a project that aims to develop a set of tools and services based on geo location technologies based on open data for the location and management of objects in indoor and outdoor spaces. The tools are intended both to citizens who use their smartphones to access services, aids to navigation from the front door to internal destinations to buildings (public office, clinic, shop, etc.. Obtaining any information available to support (code , unforeseen changes in the path, suggestions, etc., and professionals for specific activities that require the location of people, equipment, etc. i-locate to an intense use of GIS technologies for navigation and tracking "indoor" (indoor GIS, 3D GIS, to locate people (eg. Alzheimer's patients and their movements in areas not suited (geofencing to identify and track objects / portable equipment for their location, management and maintenance.

  6. Lithofacies characterization related to the Raigon Formation located in the southern area of the San Jose Department

    International Nuclear Information System (INIS)

    Spoturno, J.; Morales, E.; Cazaux, S.; Aubet, N.; Loureiro, J.

    2004-01-01

    In this work the different lithofacies characterization related to the Raigon Formation, located in the southern area of the San Jose Department, is exposed supported by surface and subsurface data. Six stratigraphical sections were constructed considering lithological borehole descriptions to the aim of making a contribution on the spatial distribution, thickness, disposition, lithofaciological variations of this Formation and its stratigraphical relationships with other units [es

  7. The Osiris reactor. Descriptive report - Volume 1 - text

    International Nuclear Information System (INIS)

    1969-05-01

    Osiris is a pool type reactor with a 70 MW thermal power. Its main purpose is to irradiate under high flows of neutrons the materials of which future nuclear power stations are made. This report proposes a description of this pool reactor. A first part describes the functional aspects and general characteristics of all installations which are in principle definitely defined (premises, irradiation and experimentation equipment, water circuits, power supply, venting, controls). The second part addresses elements which are likely to be changed, and more particularly the reactor core: fuel elements and controls (uranium and boron load in different fuel element generations, experimental locations within the core), neutron transport aspects (calculation and experiment), and thermal aspects (power generation and removal) of the pile). The third part addresses the operation: operation cycles, stops, exploitation organisation [fr

  8. Systems Biology Graphical Notation: Process Description language Level 1 Version 1.3.

    Science.gov (United States)

    Moodie, Stuart; Le Novère, Nicolas; Demir, Emek; Mi, Huaiyu; Villéger, Alice

    2015-09-04

    The Systems Biological Graphical Notation (SBGN) is an international community effort for standardized graphical representations of biological pathways and networks. The goal of SBGN is to provide unambiguous pathway and network maps for readers with different scientific backgrounds as well as to support efficient and accurate exchange of biological knowledge between different research communities, industry, and other players in systems biology. Three SBGN languages, Process Description (PD), Entity Relationship (ER) and Activity Flow (AF), allow for the representation of different aspects of biological and biochemical systems at different levels of detail. The SBGN Process Description language represents biological entities and processes between these entities within a network. SBGN PD focuses on the mechanistic description and temporal dependencies of biological interactions and transformations. The nodes (elements) are split into entity nodes describing, e.g., metabolites, proteins, genes and complexes, and process nodes describing, e.g., reactions and associations. The edges (connections) provide descriptions of relationships (or influences) between the nodes, such as consumption, production, stimulation and inhibition. Among all three languages of SBGN, PD is the closest to metabolic and regulatory pathways in biological literature and textbooks, but its well-defined semantics offer a superior precision in expressing biological knowledge.

  9. Microseismic event location by master-event waveform stacking

    Science.gov (United States)

    Grigoli, F.; Cesca, S.; Dahm, T.

    2016-12-01

    Waveform stacking location methods are nowadays extensively used to monitor induced seismicity monitoring assoiciated with several underground industrial activities such as Mining, Oil&Gas production and Geothermal energy exploitation. In the last decade a significant effort has been spent to develop or improve methodologies able to perform automated seismological analysis for weak events at a local scale. This effort was accompanied by the improvement of monitoring systems, resulting in an increasing number of large microseismicity catalogs. The analysis of microseismicity is challenging, because of the large number of recorded events often characterized by a low signal-to-noise ratio. A significant limitation of the traditional location approaches is that automated picking is often done on each seismogram individually, making little or no use of the coherency information between stations. In order to improve the performance of the traditional location methods, in the last year, alternative approaches have been proposed. These methods exploits the coherence of the waveforms recorded at different stations and do not require any automated picking procedure. The main advantage of this methods relies on their robustness even when the recorded waveforms are very noisy. On the other hand, like any other location method, the location performance strongly depends on the accuracy of the available velocity model. When dealing with inaccurate velocity models, in fact, location results can be affected by large errors. Here we will introduce a new automated waveform stacking location method which is less dependent on the knowledge of the velocity model and presents several benefits, which improve the location accuracy: 1) it accounts for phase delays due to local site effects, e.g. surface topography or variable sediment thickness 2) theoretical velocity model are only used to estimate travel times within the source volume, and not along the whole source-sensor path. We

  10. Locative media and data-driven computing experiments

    Directory of Open Access Journals (Sweden)

    Sung-Yueh Perng

    2016-06-01

    Full Text Available Over the past two decades urban social life has undergone a rapid and pervasive geocoding, becoming mediated, augmented and anticipated by location-sensitive technologies and services that generate and utilise big, personal, locative data. The production of these data has prompted the development of exploratory data-driven computing experiments that seek to find ways to extract value and insight from them. These projects often start from the data, rather than from a question or theory, and try to imagine and identify their potential utility. In this paper, we explore the desires and mechanics of data-driven computing experiments. We demonstrate how both locative media data and computing experiments are ‘staged’ to create new values and computing techniques, which in turn are used to try and derive possible futures that are ridden with unintended consequences. We argue that using computing experiments to imagine potential urban futures produces effects that often have little to do with creating new urban practices. Instead, these experiments promote Big Data science and the prospect that data produced for one purpose can be recast for another and act as alternative mechanisms of envisioning urban futures.

  11. Finding fossils in new ways: an artificial neural network approach to predicting the location of productive fossil localities.

    Science.gov (United States)

    Anemone, Robert; Emerson, Charles; Conroy, Glenn

    2011-01-01

    Chance and serendipity have long played a role in the location of productive fossil localities by vertebrate paleontologists and paleoanthropologists. We offer an alternative approach, informed by methods borrowed from the geographic information sciences and using recent advances in computer science, to more efficiently predict where fossil localities might be found. Our model uses an artificial neural network (ANN) that is trained to recognize the spectral characteristics of known productive localities and other land cover classes, such as forest, wetlands, and scrubland, within a study area based on the analysis of remotely sensed (RS) imagery. Using these spectral signatures, the model then classifies other pixels throughout the study area. The results of the neural network classification can be examined and further manipulated within a geographic information systems (GIS) software package. While we have developed and tested this model on fossil mammal localities in deposits of Paleocene and Eocene age in the Great Divide Basin of southwestern Wyoming, a similar analytical approach can be easily applied to fossil-bearing sedimentary deposits of any age in any part of the world. We suggest that new analytical tools and methods of the geographic sciences, including remote sensing and geographic information systems, are poised to greatly enrich paleoanthropological investigations, and that these new methods should be embraced by field workers in the search for, and geospatial analysis of, fossil primates and hominins. Copyright © 2011 Wiley-Liss, Inc.

  12. Site description of Forsmark at completion of the site investigation phase. SDM-Site Forsmark

    Energy Technology Data Exchange (ETDEWEB)

    2008-12-15

    The Swedish Nuclear Fuel and Waste Management Co., SKB, has undertaken site characterisation in two different areas, Forsmark and Laxemar-Simpevarp, in order to identify a suitable location for a geological repository of spent nuclear fuel according to the KBS-3 method. The site investigations have been conducted in campaigns, punctuated by data freezes. After each data freeze, the site data have been analysed and modelling has been carried out with the overall purpose to develop a site descriptive model (SDM). The site descriptive model is used by repository engineering to design the underground facility and to develop a repository layout adapted to the site. It is also essential for safety assessment, since the model is the only source for site-specific input. Another important use of the site descriptive model is in the environmental impact assessment. An SDM is an integrated model for geology, thermal properties, rock mechanics, hydrogeology, hydrogeochemistry, bedrock transport properties and a description of the surface system. The site descriptive model compiled in the current report, SDM-Site, presents an integrated understanding of the Forsmark area at the completion of the surface-based investigations, which were conducted at Forsmark during the period 2002 to 2007. It also provides a summary of the abundant underlying data and the discipline-specific models that support the site understanding. The description relies heavily on background reports that address, in particular, details in data analyses and modelling in the different disciplines. The Forsmark area is located in northern Uppland within the municipality of Oesthammar, about 120 km north of Stockholm. The candidate area for site investigation is located along the shoreline of Oeregrundsgrepen, within the north-western part of a major tectonic lens that formed between 1.87 and 1.85 billion years ago during the Svecokarelian orogeny. The candidate area is approximately 6 km long and 2 km wide. The

  13. Site description of Forsmark at completion of the site investigation phase. SDM-Site Forsmark

    International Nuclear Information System (INIS)

    2008-12-01

    The Swedish Nuclear Fuel and Waste Management Co., SKB, has undertaken site characterisation in two different areas, Forsmark and Laxemar-Simpevarp, in order to identify a suitable location for a geological repository of spent nuclear fuel according to the KBS-3 method. The site investigations have been conducted in campaigns, punctuated by data freezes. After each data freeze, the site data have been analysed and modelling has been carried out with the overall purpose to develop a site descriptive model (SDM). The site descriptive model is used by repository engineering to design the underground facility and to develop a repository layout adapted to the site. It is also essential for safety assessment, since the model is the only source for site-specific input. Another important use of the site descriptive model is in the environmental impact assessment. An SDM is an integrated model for geology, thermal properties, rock mechanics, hydrogeology, hydrogeochemistry, bedrock transport properties and a description of the surface system. The site descriptive model compiled in the current report, SDM-Site, presents an integrated understanding of the Forsmark area at the completion of the surface-based investigations, which were conducted at Forsmark during the period 2002 to 2007. It also provides a summary of the abundant underlying data and the discipline-specific models that support the site understanding. The description relies heavily on background reports that address, in particular, details in data analyses and modelling in the different disciplines. The Forsmark area is located in northern Uppland within the municipality of Oesthammar, about 120 km north of Stockholm. The candidate area for site investigation is located along the shoreline of Oeregrundsgrepen, within the north-western part of a major tectonic lens that formed between 1.87 and 1.85 billion years ago during the Svecokarelian orogeny. The candidate area is approximately 6 km long and 2 km wide. The

  14. Optimization of location routing inventory problem with transshipment

    Science.gov (United States)

    Ghani, Nor Edayu Abd; Shariff, S. Sarifah Radiah; Zahari, Siti Meriam

    2015-05-01

    Location Routing Inventory Problem (LRIP) is a collaboration of the three components in the supply chain. It is confined by location-allocation, vehicle routing and inventory management. The aim of the study is to minimize the total system cost in the supply chain. Transshipment is introduced in order to allow the products to be shipped to a customer who experiences a shortage, either directly from the supplier or from another customer. In the study, LRIP is introduced with the transshipment (LRIPT) and customers act as the transshipment points. We select the transshipment point by using the p-center and we present the results in two divisions of cases. Based on the analysis, the results indicated that LRIPT performed well compared to LRIP.

  15. An Application Of Facility Location Models With Hotspot Analysis For Optimal Location Of Abattoir Bio-Energy Plant In Anambra State Of Nigeria

    Directory of Open Access Journals (Sweden)

    E. C. Chukwuma

    2015-08-01

    Full Text Available Poor waste management strategy in abattoir in the the study area has needs a major attention considering it negative impacts on man land and water. Sitting of centralized biogas plant in a strategic location in the state would be the major means of combating the environmental challenges of increase in abattoir waste generation as result of population explosion in the state. This study investigates optimal location for sitting central abattoir waste treatment facility in Anambra State of Nigeria using facility location models with hotspot analysis in GIS environment. The result of the study shows that Using centre of gravity model the central location was estimated to be at Xc Yc 6.900953016 6.110157865. Based on inadequacy of the model hotspot analysis operation was done the hotspot analysis delineated clusters of abattoirs significantly higher in bio-wastes production than the overall study area. The hotspot analysis shows that the West regions of the study area has many abattoir that is classified as hotspot abattoirs. Using the hotspot abattoirs as proposed sites for load-distance model three abattoirs were identified as proposed sites- Obosi slaugher house Nkpor Private slaughter house and Oye-olise Ogbunike slaugher house. Their load distance values are 17250.40058 16299.24005 and 18210.14631 respectively. The optimal location for construction of central abattoir bio-waste treatment facility based on the application of these location facility models and hotspot analysis is Nkpor private slaughter house or its environs.

  16. Analysis of the possibility of SysML and BPMN application in formal data acquisition system description

    Science.gov (United States)

    Ćwikła, G.; Gwiazda, A.; Banaś, W.; Monica, Z.; Foit, K.

    2017-08-01

    The article presents the study of possible application of selected methods of complex description, that can be used as a support of the Manufacturing Information Acquisition System (MIAS) methodology, describing how to design a data acquisition system, allowing for collecting and processing real-time data on the functioning of a production system, necessary for management of a company. MIAS can allow conversion into Cyber-Physical Production System. MIAS is gathering and pre-processing data on the state of production system, including e.g. realisation of production orders, state of machines, materials and human resources. Systematised approach and model-based development is proposed for improving the quality of the design of MIAS methodology-based complex systems supporting data acquisition in various types of companies. Graphical specification can be the baseline for any model-based development in specified areas. The possibility of application of SysML and BPMN, both being UML-based languages, representing different approaches to modelling of requirements, architecture and implementation of the data acquisition system, as a tools supporting description of required features of MIAS, were considered.

  17. Hamstring Reinjuries Occur at the Same Location and Early After Return to Sport: A Descriptive Study of MRI-Confirmed Reinjuries

    NARCIS (Netherlands)

    Wangensteen, Arnlaug; Tol, Johannes L.; Witvrouw, Erik; van Linschoten, Robbart; Almusa, Emad; Hamilton, Bruce; Bahr, Roald

    2016-01-01

    Despite relatively high reinjury rates after acute hamstring injuries, there is a lack of detailed knowledge about where and when hamstring reinjuries occur, and studies including imaging-confirmed reinjuries are scarce. To investigate the location, radiological severity, and timing of reinjuries on

  18. NWTS conceptual reference repository description (CRRD). Volume 1. Summary

    International Nuclear Information System (INIS)

    1981-05-01

    This report is a Conceptual Reference Repository Description (CRRD) for the terminal storage of spent, unreprocessed fuel assemblies and low-level transuranic waste. It is based on the following three previously prepared conceptual design reports: National Waste Terminal Storage in a Bedded Salt Formation for Spent Unreprocessed Fuel (NWTS-R2), prepared by Kaiser Engineers; National Waste Terminal Storage Repository Number 1 (NWTS-R1), prepared by Stearns-Roger; Spent Fuel Receiving and Packaging Facility Conceptual Design, prepared by Rockwell Hanford Operations and Kaiser Engineers. The CRRD is not itself a conceptual design report, but combines the key features of the above three reports into a description of a reference repository. This description is to be used as a basis for the preparation of a preliminary information report for the repositories. The CRRD discusses from a conceptual engineering standpoint the structures, systems, equipment, and operations necessary to (1) receive unreprocessed spent fuel assemblies via standard shipping casks, (2) offload these assemblies, (3) place the assemblies in canisters, (4) transport the canisters to underground storage locations in the salt dome, and (5) place these canisters in terminal storage. The CRRD also elaborates on the concepts for the retrieval and recovery of the spent fuel after burial; describes the development of the shafts and the underground areas,as well as the supporting operational utility and administrative features of the repository; and discusses the impacts on the reference repository of (1) changes in the waste package concept, (2) dry receiving and dry temporary storage of waste, (3) terminal storage of reprocessing waste, and (4) alternative underground development schemes

  19. Surface system Forsmark. Site descriptive modelling SDM-Site Forsmark

    Energy Technology Data Exchange (ETDEWEB)

    Lindborg, Tobias [ed.

    2008-12-15

    SKB has undertaken site characterization of two different areas, Forsmark and Laxemar-Simpevarp, in order to find a suitable location for a geological repository for spent nuclear fuel. This report focuses on the site descriptive modelling of the surface system at Forsmark. The characterization of the surface system at the site was primarily made by identifying and describing important properties in different parts of the surface system, properties concerning e.g. hydrology and climate, Quaternary deposits and soils, hydrochemistry, vegetation, ecosystem functions, but also current and historical land use. The report presents available input data, methodology for data evaluation and modelling, and resulting models for each of the different disciplines. Results from the modelling of the surface system are also integrated with results from modelling of the deep bedrock system. The Forsmark site is located within the municipality of Oesthammar, about 120 km north of Stockholm. The investigated area is located along the shoreline of Oeregrundsgrepen, a funnel-shaped bay of the Baltic Sea. The area is characterized by small-scale topographic variations and is almost entirely located at altitudes lower than 20 metres above sea level. The Quaternary deposits in the area are dominated by till, characterized by a rich content of calcite which was transported by the glacier ice to the area from the sedimentary bedrock of Gaevlebukten about 100 km north of Forsmark. As a result, the surface waters and shallow groundwater at Forsmark are characterized by high pH values and high concentrations of certain major constituents, especially calcium and bicarbonate. The annual precipitation and runoff are 560 and 150 mm, respectively. The lakes are small and shallow, with mean and maximum depths ranging from approximately 0.1 to 1 m and 0.4 to 2 m. Sea water flows into the most low-lying lakes during events giving rise to very high sea levels. Wetlands are frequent and cover 25 to 35

  20. MICROBIOLOGICAL QUALITY AND FACTORS THAT IMPACT MILK PRODUCTION FROM FAMILY FARMS LOCATED NORTH OF THE STATE OF ESPÍRITO SANTO

    Directory of Open Access Journals (Sweden)

    Maria da Penha Píccolo Ramos

    2014-07-01

    Full Text Available Milk production in São Mateus, ES, is a traditional and important socioeconomic activity for family farmers and for the state. The aim of this study was to evaluate the production characteristics of four rural communities, coded as A, B, C and D, as well as the microbiological quality of raw milk in one of these locations. The four communities were based on family farms. Community A was composed of 4 farmers; community B was composed of 12 farmers; community C was composed of 10 farmers and community D was composed of 2 farmers, totaling 28 family farms in the city of São Mateus, northern region of the State of Espírito Santo. The quality of milk samples from 10 producers of community C was assessed after milking, as well as samples from the collective cooling tank, in five repetitions. A structured questionnaire based on the requirements of the legislation of the Ministry of Agriculture, Livestock and Supply was sent to each farmer from the 28 farms. The questions included cleaning and physical structure of the barn, quality of water, hygiene practice of milkers and animals and tests for detection of mastitis. None of the farms performed pre-dipping and post-dipping. Thirty (30 samples (55.0% and 25 samples (45.5% of the total 55 samples assessed did not meet the standards for total bacterial count (TBC and somatic cell count (SCC, respectively. Nonconformities were detected in the stages of production, and milk samples did not meet microbiological standards. Milk production should be improved and Good Agricultural Practices (GAP should be implemented in the farms to ensure food safety and the sustainability of the segment in the northern region of the state of Espírito Santo.

  1. Physics 3204. Course Description.

    Science.gov (United States)

    Newfoundland and Labrador Dept. of Education.

    A description of the physics 3204 course in Newfoundland and Labrador is provided. The description includes: (1) statement of purpose, including general objectives of science education; (2) a list of six course objectives; (3) course content for units on sound, light, optical instruments, electrostatics, current electricity, Michael Faraday and…

  2. Potential bioethanol feedstock availability around nine locations in the Republic of Ireland

    Energy Technology Data Exchange (ETDEWEB)

    Deverell, R.; McDonnell, K.; Devlin, G. [Department of Biosystems Engineering, Agriculture and Food Science Building, University College Dublin, Belfield (Ireland)

    2009-07-01

    The Republic of Ireland, like many other countries is trying to diversify energy sources to counteract environmental, political and social concerns. Bioethanol from domestically grown agricultural crops is an indigenously produced alternative fuel that can potentially go towards meeting the goal of diversified energy supply. The Republic of Ireland's distribution of existing soils and agricultural land-uses limit arable crop land to around 10% of total agricultural area. Demand for land to produce arable crops is expected to decrease, which could open the opportunity for bioethanol production. Bioethanol production plants are required to be of a sufficient scale in order to compete economically with other fuel sources, it is important therefore to determine if enough land exists around potential ethanol plant locations to meet the potential demands for feedstock. This study determines, through the use of a developed GIS based model, the potential quantities of feedstock that is available in the hinterlands of nine locations in the Republic of Ireland. The results indicate that three locations can meet all its feedstock demands using indigenously grown sugarbeet, while only one location can meet its demands using a combination of indigenous wheat and straw as the two locally sourced feedstocks. (author)

  3. Potential Bioethanol Feedstock Availability Around Nine Locations in the Republic of Ireland

    Directory of Open Access Journals (Sweden)

    Rory Deverell

    2009-03-01

    Full Text Available The Republic of Ireland, like many other countries is trying to diversify energy sources to counteract environmental, political and social concerns. Bioethanol from domestically grown agricultural crops is an indigenously produced alternative fuel that can potentially go towards meeting the goal of diversified energy supply. The Republic of Ireland’s distribution of existing soils and agricultural land-uses limit arable crop land to around 10% of total agricultural area. Demand for land to produce arable crops is expected to decrease, which could open the opportunity for bioethanol production. Bioethanol production plants are required to be of a sufficient scale in order to compete economically with other fuel sources, it is important therefore to determine if enough land exists around potential ethanol plant locations to meet the potential demands for feedstock. This study determines, through the use of a developed GIS based model, the potential quantities of feedstock that is available in the hinterlands of nine locations in the Republic of Ireland. The results indicate that three locations can meet all its feedstock demands using indigenously grown sugarbeet, while only one location can meet its demands using a combination of indigenous wheat and straw as the two locally sourced feedstocks.

  4. Quantitative descriptive analysis of Italian polenta produced with different corn cultivars.

    Science.gov (United States)

    Zeppa, Giuseppe; Bertolino, Marta; Rolle, Luca

    2012-01-30

    Polenta is a porridge-like dish, generally made by mixing cornmeal with salt water and stirring constantly while cooking over a low heat. It can be eaten plain, straight from the pan, or topped with various foods (cheeses, meat, sausages, fish, etc.). It is most popular in northern Italy but can also be found in Switzerland, Austria, Croatia, Argentina and other countries in Eastern Europe and South America. Despite this diffusion, there are no data concerning the sensory characteristics of this product. A research study was therefore carried out to define the lexicon for a sensory profile of polenta and relationships with corn cultivars. A lexicon with 13 sensory parameters was defined and validated before references were determined. After panel training, the sensory profiles of 12 autochthonous maize cultivars were defined. The results of this research highlighted that quantitative descriptive analysis can also be used for the sensory description of polenta, and that the defined lexicon can be used to describe the sensory qualities of polenta for both basic research, such as maize selection, and product development. Copyright © 2011 Society of Chemical Industry.

  5. How significant is perceived environmental risk to business location decisions?

    International Nuclear Information System (INIS)

    Allison, T.; Calzonetti, F.

    1996-01-01

    It has been argued that adverse perceptions of risk associated with high-level nuclear waste (HLNW) facilities will have significant impacts on the attraction of new, and the maintenance of existing business activities in areas in which adverse perceptions develop. We examine this proposition by the considering the importance of environmental amenities and a range of other factors to business location decisions using evidence from surveys of more than 400 manufacturing and business service establishments in Colorado and Utah. We show that the importance of environmental amenities varies according to a number of factors, in particular the type of product (manufactured product or business service), type of establishment (single-establishment firm or establishment of a multilocational firm) and establishment employment size. Policies designed to offset the loss of business activity that might result from adverse risk perceptions associated with HLNW facilities must therefore take into account how sensitive various forms of business activity present or likely to locate in any particular area might be to environmental factors

  6. How significant is perceived environmental risk to business location decisions?

    Energy Technology Data Exchange (ETDEWEB)

    Allison, T. [Argonne National Lab., IL (United States); Calzonetti, F. [West Virginia Univ., Morgantown, WV (United States)

    1996-12-31

    It has been argued that adverse perceptions of risk associated with high-level nuclear waste (HLNW) facilities will have significant impacts on the attraction of new, and the maintenance of existing business activities in areas in which adverse perceptions develop. We examine this proposition by the considering the importance of environmental amenities and a range of other factors to business location decisions using evidence from surveys of more than 400 manufacturing and business service establishments in Colorado and Utah. We show that the importance of environmental amenities varies according to a number of factors, in particular the type of product (manufactured product or business service), type of establishment (single-establishment firm or establishment of a multilocational firm) and establishment employment size. Policies designed to offset the loss of business activity that might result from adverse risk perceptions associated with HLNW facilities must therefore take into account how sensitive various forms of business activity present or likely to locate in any particular area might be to environmental factors.

  7. Evalutive Descriptions of Art

    Directory of Open Access Journals (Sweden)

    Nataša Lah

    2016-01-01

    Full Text Available Taking into account the fact that, throughout history, certain artworks have been considered as “worth of watching” (according to the Greek etymon ἀξιοϑέατος / aksioteatos, preservation, or theorizing, while others were not, one is led to investigate the various types of evaluative descriptions. Those artworks that are more valuable than others, or simply valuable in themselves on the basis of rather specific features, have always represented the paradigmatic model for the evaluator, thus revealing the identitary nature of value as different from one epoch to another. Our aim has been to discern, with regard to this starting point, the way in which the process of evaluating artworks fits the general matrix of the universal theory of value, with its clearly distinguished levels of evaluation, beginning with value descriptions, continuing through the features of evaluation or abstract qualities of values extracted from these descriptions, and ending with value norms or systems of accepted generalizations in evaluation. Value standpoints in such an evaluation matrix represent dispositions or preferences in procedures, which reflect the norms or signifying concepts of the time. Corresponding procedures, or applications of the hierarchicized signification of artworks, are manifested in all known forms of artwork assessment: attribution, institutionalization, and setting of priorities in terms of exhibition, conservation, acquisition, restoration, and so on. Research in the history of European art-historical ideas has corroborated the hypothesis that, prior to the late 18th century, clear normative patterns were applied when it came to the evaluation of artworks. However, with the emergence of early Romanticism, this could no longer be done in the traditional way. Before the period in question, visual art was created (regardless of some stylistic discrepancies between individual authors and classified according to well-defined thematic

  8. Isolating $Wt$ production at the LHC

    CERN Document Server

    White, Chris D; Laenen, Eric; Maltoni, Fabio

    2009-01-01

    We address the issue of single top production in association with a W boson at the Large Hadron Collider, in particular how to obtain an accurate description in the face of the top pair production background given that the two processes interfere with each other. We stress the advantages of an MC@NLO description, and find that for cuts used to isolate the signal, it makes sense to consider Wt as a well-defined production process in that the interference with top pair production is small, and the cross-section of the former is above the scale variation uncertainty associated with the latter. We also consider the case where both Wt and top pair production are backgrounds to a third process (Higgs boson production followed by decay to a W boson pair), and find in this context that interference issues can also be neglected. We discuss the generalization of our results to other situations, aided by a comparison between the MC@NLO approach and a calculation of the WWbb final state matched to a parton shower.

  9. LocateP: Genome-scale subcellular-location predictor for bacterial proteins

    Directory of Open Access Journals (Sweden)

    Zhou Miaomiao

    2008-03-01

    Full Text Available Abstract Background In the past decades, various protein subcellular-location (SCL predictors have been developed. Most of these predictors, like TMHMM 2.0, SignalP 3.0, PrediSi and Phobius, aim at the identification of one or a few SCLs, whereas others such as CELLO and Psortb.v.2.0 aim at a broader classification. Although these tools and pipelines can achieve a high precision in the accurate prediction of signal peptides and transmembrane helices, they have a much lower accuracy when other sequence characteristics are concerned. For instance, it proved notoriously difficult to identify the fate of proteins carrying a putative type I signal peptidase (SPIase cleavage site, as many of those proteins are retained in the cell membrane as N-terminally anchored membrane proteins. Moreover, most of the SCL classifiers are based on the classification of the Swiss-Prot database and consequently inherited the inconsistency of that SCL classification. As accurate and detailed SCL prediction on a genome scale is highly desired by experimental researchers, we decided to construct a new SCL prediction pipeline: LocateP. Results LocateP combines many of the existing high-precision SCL identifiers with our own newly developed identifiers for specific SCLs. The LocateP pipeline was designed such that it mimics protein targeting and secretion processes. It distinguishes 7 different SCLs within Gram-positive bacteria: intracellular, multi-transmembrane, N-terminally membrane anchored, C-terminally membrane anchored, lipid-anchored, LPxTG-type cell-wall anchored, and secreted/released proteins. Moreover, it distinguishes pathways for Sec- or Tat-dependent secretion and alternative secretion of bacteriocin-like proteins. The pipeline was tested on data sets extracted from literature, including experimental proteomics studies. The tests showed that LocateP performs as well as, or even slightly better than other SCL predictors for some locations and outperforms

  10. Chemical products and industrial materials

    International Nuclear Information System (INIS)

    1995-12-01

    A compilation of all universities, industrial and governmental agencies in Quebec which are actively involved in research and development of chemical products and industrial materials derived from biomass products, was presented. Each entry presented in a standard format that included a description of the major research activities of the university or agency, the principal technologies used in the research, available research and analytical equipment, a description of the research personnel, names, and addresses of contact persons for the agency or university. Thirty entries were presented. These covered a wide diversity of activities including biotechnological research such as genetic manipulations, bioconversion, fermentation, enzymatic hydrolysis and physico-chemical applications such as bleaching, de-inking, purification and synthesis. tabs

  11. QuakeML: XML for Seismological Data Exchange and Resource Metadata Description

    Science.gov (United States)

    Euchner, F.; Schorlemmer, D.; Becker, J.; Heinloo, A.; Kästli, P.; Saul, J.; Weber, B.; QuakeML Working Group

    2007-12-01

    QuakeML is an XML-based data exchange format for seismology that is under development. Current collaborators are from ETH, GFZ, USC, USGS, IRIS DMC, EMSC, ORFEUS, and ISTI. QuakeML development was motivated by the lack of a widely accepted and well-documented data format that is applicable to a broad range of fields in seismology. The development team brings together expertise from communities dealing with analysis and creation of earthquake catalogs, distribution of seismic bulletins, and real-time processing of seismic data. Efforts to merge QuakeML with existing XML dialects are under way. The first release of QuakeML will cover a basic description of seismic events including picks, arrivals, amplitudes, magnitudes, origins, focal mechanisms, and moment tensors. Further extensions are in progress or planned, e.g., for macroseismic information, location probability density functions, slip distributions, and ground motion information. The QuakeML language definition is supplemented by a concept to provide resource metadata and facilitate metadata exchange between distributed data providers. For that purpose, we introduce unique, location-independent identifiers of seismological resources. As an application of QuakeML, ETH Zurich currently develops a Python-based seismicity analysis toolkit as a contribution to CSEP (Collaboratory for the Study of Earthquake Predictability). We follow a collaborative and transparent development approach along the lines of the procedures of the World Wide Web Consortium (W3C). QuakeML currently is in working draft status. The standard description will be subjected to a public Request for Comments (RFC) process and eventually reach the status of a recommendation. QuakeML can be found at http://www.quakeml.org.

  12. Public Transportation and Industrial Location Patterns in California

    OpenAIRE

    Chatman , Daniel; Xu, Ruoying; Park , Janice; Le, Kim

    2016-01-01

    Public transit investments are a large and growing share of all transportation investments in the state of California, and such critical investments should be evaluated partly on their economic benefits. Taking such benefits into account could alter investment, service, and service restructuring decisions taken by transit agencies in the state. The relationship of public transportation to economic productivity, and spatial patterns of industrial location, is understudied. This project investi...

  13. Description of gasket failure in a 7 cell PEMFC stack

    Energy Technology Data Exchange (ETDEWEB)

    Husar, Attila; Serra, Maria [Institut de Robotica i Informatica Industrial, Parc Tecnologic de Barcelona, Edifici U, C. Llorens i Artigas, 4-6, 2a Planta, 08028 Barcelona (Spain); Kunusch, Cristian [Laboratorio de Electronica Industrial Control e Instrumentacion, Facultad de Ingenieria, UNLP (Argentina)

    2007-06-10

    This article presents the data and the description of a fuel cell stack that failed due to gasket degradation. The fuel cell under study is a 7 cell stack. The unexpected change in several variables such as temperature, pressure and voltage indicated the possible failure of the stack. The stack was monitored over a 6 h period in which data was collected and consequently analyzed to conclude that the fuel cell stack failed due to a crossover leak on the anode inlet port located on the cathode side gasket of cell 2. This stack failure analysis revealed a series of indicators that could be used by a super visional controller in order to initiate a shutdown procedure. (author)

  14. CEPF Western Ghats Special Series: Description of tadpole stages of the Malabar Tree Toad Pedostibes tuberculosis Gunther, 1875 (Anura: Bufonidae

    Directory of Open Access Journals (Sweden)

    K.P. Dinesh

    2014-10-01

    Full Text Available Pedostibes tuberculosus, the Malabar tree toad, was described 137 years ago from the Malabar region (now the coastal parts of Kerala of the Western Ghats. Since the description of this arboreal toad, not much information is available on the natural history, breeding habits and life cycle except for its description, range of distribution and advertisement call details. In the present account, the tadpole stages of this toad from Gosner tadpole Stage 21 to 45 are presented and the phytotelmatic mode of life of this toad has been confirmed by locating the tadpoles within the Ochlandra reed culm.

  15. Data breach locations, types, and associated characteristics among US hospitals.

    Science.gov (United States)

    Gabriel, Meghan Hufstader; Noblin, Alice; Rutherford, Ashley; Walden, Amanda; Cortelyou-Ward, Kendall

    2018-02-01

    The objectives of this study were to describe the locations in hospitals where data are breached, the types of breaches that occur most often at hospitals, and hospital characteristics, including health information technology (IT) sophistication and biometric security capabilities, that may be predicting factors of large data breaches that affect 500 or more patients. The Office of Civil Rights breach data from healthcare providers regarding breaches that affected 500 or more individuals from 2009 to 2016 were linked with hospital characteristics from the Health Information Management Systems Society and the American Hospital Association Health IT Supplement databases. Descriptive statistics were used to characterize hospitals with and without breaches, data breach type, and location/mode of data breaches in hospitals. Multivariate logistic regression analysis explored hospital characteristics that were predicting factors of a data breach affecting at least 500 patients, including area characteristics, region, health system membership, size, type, biometric security use, health IT sophistication, and ownership. Of all types of healthcare providers, hospitals accounted for approximately one-third of all data breaches and hospital breaches affected the largest number of individuals. Paper and films were the most frequent location of breached data, occurring in 65 hospitals during the study period, whereas network servers were the least common location but their breaches affected the most patients overall. Adjusted multivariate results showed significant associations among data breach occurrences and some hospital characteristics, including type and size, but not others, including health IT sophistication or biometric use for security. Hospitals should conduct routine audits to allow them to see their vulnerabilities before a breach occurs. Additionally, information security systems should be implemented concurrently with health information technologies. Improving

  16. Methodology for selection of attributes and operating conditions for SVM-Based fault locator's

    Directory of Open Access Journals (Sweden)

    Debbie Johan Arredondo Arteaga

    2017-01-01

    Full Text Available Context: Energy distribution companies must employ strategies to meet their timely and high quality service, and fault-locating techniques represent and agile alternative for restoring the electric service in the power distribution due to the size of distribution services (generally large and the usual interruptions in the service. However, these techniques are not robust enough and present some limitations in both computational cost and the mathematical description of the models they use. Method: This paper performs an analysis based on a Support Vector Machine for the evaluation of the proper conditions to adjust and validate a fault locator for distribution systems; so that it is possible to determine the minimum number of operating conditions that allow to achieve a good performance with a low computational effort. Results: We tested the proposed methodology in a prototypical distribution circuit, located in a rural area of Colombia. This circuit has a voltage of 34.5 KV and is subdivided in 20 zones. Additionally, the characteristics of the circuit allowed us to obtain a database of 630.000 records of single-phase faults and different operating conditions. As a result, we could determine that the locator showed a performance above 98% with 200 suitable selected operating conditions. Conclusions: It is possible to improve the performance of fault locators based on Support Vector Machine. Specifically, these improvements are achieved by properly selecting optimal operating conditions and attributes, since they directly affect the performance in terms of efficiency and the computational cost.

  17. Generalizing: The descriptive struggle

    Directory of Open Access Journals (Sweden)

    Barney G. Glaser, Ph.D.; Hon Ph.D.

    2006-11-01

    Full Text Available The literature is not kind to the use of descriptive generalizations. Authors struggle and struggle to find and rationalize a way to use them and then fail in spite of trying a myriad of work-arounds. And then we have Lincoln and Guba’s famous statement: “The only generalization is: there is no generalization” in referring to qualitative research. (op cit, p. 110 They are referring to routine QDA yielding extensive descriptions, but which tacitly include conceptual generalizations without any real thought of knowledge about them. In this chapter I wish to explore this struggle for the purpose of explaining that the various contra arguments to using descriptive generalizations DO NOT apply to the ease of using conceptual generalizations yielded in SGT and especially FGT. I will not argue for the use of descriptive generalization. I agree with Lincoln and Guba with respect to QDA, “the only generalization is: there is no generalization.” It is up to the QDA methodologists, of whom there are many; to continue the struggle and I wish them well.

  18. 41 CFR 101-29.214 - Commercial-type product.

    Science.gov (United States)

    2010-07-01

    ... 41 Public Contracts and Property Management 2 2010-07-01 2010-07-01 true Commercial-type product... Regulations System FEDERAL PROPERTY MANAGEMENT REGULATIONS SUPPLY AND PROCUREMENT 29-FEDERAL PRODUCT DESCRIPTIONS 29.2-Definitions § 101-29.214 Commercial-type product. A commercial-type product is defined as: (a...

  19. Radiochemical Facility Laboratory (RFL). Description of the installation and reprogramming of its objectives

    International Nuclear Information System (INIS)

    Bonini, Alberto; Dominguez, C.; Dell'Occhio, Leonor A.; Stankevicius, Alejandro

    1999-01-01

    A description is made of a laboratory that will be used to characterize radioactive wastes, to study the burnup of fuel elements, to make isotopic analysis by mass spectroscopy and to recover fissile materials from the production of fission 99 Mo. The equipment and the ventilation system are also described. (author)

  20. The KAERI 10 MeV Electron Linac - Description and Operational Manual

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Byung Cheol; Park, Seong Hee; Jung, Young Uk; Han, Young Hwan; Kang, Hee Young

    2005-06-15

    The objective of this technical report is to guide the right operation and maintenance of the KAERI electron linac system. The KAERI electron linac system consists of 2 MeV injector based on 176 MHz Normal conducting RF (Radio Frequency)cavity and 10 MeV main accelerator based on 352 MHz Superconducting RF cavity, electron beamlines (injection and extraction). Since a electron accelerator generates hazard radiation, this system is located at the shielded room in basement and we can operate the system using the remote control system. It includes the description and the operational manual as well as the detailed technical direction for trouble shooting.

  1. The KAERI 10 MeV Electron Linac - Description and Operational Manual

    International Nuclear Information System (INIS)

    Lee, Byung Cheol; Park, Seong Hee; Jung, Young Uk; Han, Young Hwan; Kang, Hee Young

    2005-06-01

    The objective of this technical report is to guide the right operation and maintenance of the KAERI electron linac system. The KAERI electron linac system consists of 2 MeV injector based on 176 MHz Normal conducting RF (Radio Frequency)cavity and 10 MeV main accelerator based on 352 MHz Superconducting RF cavity, electron beamlines (injection and extraction). Since a electron accelerator generates hazard radiation, this system is located at the shielded room in basement and we can operate the system using the remote control system. It includes the description and the operational manual as well as the detailed technical direction for trouble shooting

  2. Simulation of the plume emitted by a municipal waste incinerator located in the Madeira island

    Energy Technology Data Exchange (ETDEWEB)

    Coutinho, M.; Ribeiro, C.; Pereira, M.; Borrego, C. [Campus Univ., AVEIRO (Portugal). IDAD - Inst. of Environment and Development

    2004-07-01

    The study of meteorological circulations in small islands has been quite limited with the majority of the research published concerning the analysis of the eolic potential for energy production. Other researchers focused on the description of the dispersion of gases emitted by volcanic activity. In this paper, a mesoscale meteorological and dispersion model was applied to simulate the behaviour of the plume of a municipal waste incinerator (MSW) that was constructed in the southern slope of the Madeira island at an altitude of 1380 m. Madeira is a Portuguese island located in the Atlantic Ocean at approximately 32 40'N and 16 52'W with a clear east-west development. The island is relatively small (60 x 20 km{sup 2}) but is characterized by very complex orography with maximum peaks reaching 1800 m. The fact that the orography has the same east-west development creates a very strong distinction between the northern and the southern slopes. The northern slope is strongly exposed to the prevalent synoptic flows and the southern slope is much warmer, quiet and where the majority of the population lives. The climate is very mild with small thermal amplitudes and maximum temperatures between 18 to 28 C. Sea temperature during summer rises to 22-23 C. (orig.)

  3. Planning the location of facilities to implement a reverse logistic system of post-consumer packaging using a location mathematical model.

    Science.gov (United States)

    Couto, Maria Claudia Lima; Lange, Liséte Celina; Rosa, Rodrigo de Alvarenga; Couto, Paula Rogeria Lima

    2017-12-01

    The implementation of reverse logistics systems (RLS) for post-consumer products provides environmental and economic benefits, since it increases recycling potential. However, RLS implantation and consolidation still face problems. The main shortcomings are the high costs and the low expectation of broad implementation worldwide. This paper presents two mathematical models to decide the number and the location of screening centers (SCs) and valorization centers (VCs) to implement reverse logistics of post-consumer packages, defining the optimum territorial arrangements (OTAs), allowing the inclusion of small and medium size municipalities. The paper aims to fill a gap in the literature on RLS location facilities that not only aim at revenue optimization, but also the participation of the population, the involvement of pickers and the service universalization. The results showed that implementation of VCs can lead to revenue/cost ratio higher than 100%. The results of this study can supply companies and government agencies with a global view on the parameters that influence RLS sustainability and help them make decisions about the location of these facilities and the best reverse flows with the social inclusion of pickers and serving the population of small and medium-sized municipalities.

  4. Characteristics of AKR sources: A statistical description

    International Nuclear Information System (INIS)

    Hilgers, A.; Roux, A.; Lundin, R.

    1991-01-01

    A description of plasma properties within the sources of the Auroral Kilometric Radiation (AKR) is given. It is based on data collected during ∼ 50 AKR source crossings in the altitude range between 4,000 and 9,000 km by the Swedish spacecraft Viking. The following results are obtained; (i) the frequency of the lowest frequency peak of the AKR f peak is found to be very close to f ce , the electron gyrofrequency ((f peak -f ce )/f ce ≤ 0.08), on the average, (ii) the lower cutoff frequency f LC is on the average at f ce ((f LC -f ce )/f ce ≅ 0), (iii) in the sources the density is typically less than 1.5 cm -3 , which is of the order of the density of hot electrons and (iv) the source is located within an acceleration region, as evidenced by electrons accelerated above and ions accelerated below

  5. Descriptive and inferential statistical methods used in burns research.

    Science.gov (United States)

    Al-Benna, Sammy; Al-Ajam, Yazan; Way, Benjamin; Steinstraesser, Lars

    2010-05-01

    Burns research articles utilise a variety of descriptive and inferential methods to present and analyse data. The aim of this study was to determine the descriptive methods (e.g. mean, median, SD, range, etc.) and survey the use of inferential methods (statistical tests) used in articles in the journal Burns. This study defined its population as all original articles published in the journal Burns in 2007. Letters to the editor, brief reports, reviews, and case reports were excluded. Study characteristics, use of descriptive statistics and the number and types of statistical methods employed were evaluated. Of the 51 articles analysed, 11(22%) were randomised controlled trials, 18(35%) were cohort studies, 11(22%) were case control studies and 11(22%) were case series. The study design and objectives were defined in all articles. All articles made use of continuous and descriptive data. Inferential statistics were used in 49(96%) articles. Data dispersion was calculated by standard deviation in 30(59%). Standard error of the mean was quoted in 19(37%). The statistical software product was named in 33(65%). Of the 49 articles that used inferential statistics, the tests were named in 47(96%). The 6 most common tests used (Student's t-test (53%), analysis of variance/co-variance (33%), chi(2) test (27%), Wilcoxon & Mann-Whitney tests (22%), Fisher's exact test (12%)) accounted for the majority (72%) of statistical methods employed. A specified significance level was named in 43(88%) and the exact significance levels were reported in 28(57%). Descriptive analysis and basic statistical techniques account for most of the statistical tests reported. This information should prove useful in deciding which tests should be emphasised in educating burn care professionals. These results highlight the need for burn care professionals to have a sound understanding of basic statistics, which is crucial in interpreting and reporting data. Advice should be sought from professionals

  6. Location-based prospective memory.

    Science.gov (United States)

    O'Rear, Andrea E; Radvansky, Gabriel A

    2018-02-01

    This study explores location-based prospective memory. People often have to remember to do things when in a particular location, such as buying tissues the next time they are in the supermarket. For event cognition theory, location is important for structuring events. However, because event cognition has not been used to examine prospective memory, the question remains of how multiple events will influence prospective memory performance. In our experiments, people delivered messages from store to store in a virtual shopping mall as an ongoing task. The prospective tasks were to do certain activities in certain stores. For Experiment 1, each trial involved one prospective memory task to be done in a single location at one of three delays. The virtual environment and location cues were effective for prospective memory, and performance was unaffected by delay. For Experiment 2, each trial involved two prospective memory tasks, given in either one or two instruction locations, and to be done in either one or two store locations. There was improved performance when people received instructions from two locations and did both tasks in one location relative to other combinations. This demonstrates that location-based event structure influences how well people perform on prospective memory tasks.

  7. Over facility design description for the CPDF [Centrifuge Plant Demonstration Facility]: SDD-1 [System Design Description

    International Nuclear Information System (INIS)

    1987-04-01

    The Centrifuge Plant Demonstration Facility (CPDF) is an essential part of the continuing development of first-production-plant centrifuge technology that will integrate centrifuge machines into a process and enrichment plant design. The CPDF will provide facilities for testing and continued development of a unit cascade in direct support of the commercial Gas Centrifuge Enrichment Plant (GCEP). The basic cascade-oriented equipment, feed, withdrawal, drive system, process piping, utility piping, and other auxiliary and support equipment will be tested in an operating configuration that represents, to the extent possible, GCEP arrangement and operating conditions. The objective will be to demonstrate procedures for production cascade installation, start-up, operation, and maintenance, and to provide proof of overall cascade and associated system design, construction, and operating and maintenance concepts. To the maximum possible extent, all equipment for the CPDF will be procured from commercial sources. Centrifuges will be procured from industry using government-supplied specifications and drawings. The existing Component Preparation Laboratory (CPL) located near the CPDF site will be used for centrifuge component receiving, inspection, assembly, and qualification testing of pre-production test machines. Later in the test program, samples of production machines planned for use in the GCEP will be tested in the CPDF

  8. Accuracy Improvement of Real-Time Location Tracking for Construction Workers

    Directory of Open Access Journals (Sweden)

    Hyunsoo Kim

    2018-05-01

    Full Text Available Extensive research has been conducted on the real-time locating system (RTLS for tracking construction components, including workers, equipment, and materials, in order to improve construction performance (e.g., productivity improvement or accident prevention. In order to prevent safety accidents and make more sustainable construction job sites, the higher accuracy of RTLS is required. To improve the accuracy of RTLS in construction projects, this paper presents a RTLS using radio frequency identification (RFID. For this goal, this paper develops a location tracking error mitigation algorithm and presents the concept of using assistant tags. The applicability and effectiveness of the developed RTLS are tested under eight different construction environments and the test results confirm the system’s strong potential for improving the accuracy of real-time location tracking in construction projects, thus enhancing construction performance.

  9. Uranium and thorium occurrences in New Mexico: distribution, geology, production, and resources, with selected bibliography. Open-file report OF-183

    International Nuclear Information System (INIS)

    McLemore, V.T.

    1983-09-01

    Over 1300 uranium and thorium occurrences are found in over 100 formational units in all but two counties, in all 1- by 2-degree topographic quadrangles, and in all four geographic provinces in New Mexico. Uranium production in New Mexico has surpassed yearly production from all other states since 1956. Over 200 mines in 18 counties in New Mexico have produced 163,010 tons (147,880 metric tons) of U 3 O 8 from 1948 to 1982, 40% of the total uranium production in the United States. More than 99% of this production has come from sedimentary rocks in the San Juan Basin area in northwestern New Mexico; 96% has come from the Morrison Formation alone. All of the uranium reserves and the majority of the potential uranium resources in New Mexico are in the Grants uranium district. About 112,500 tons (102,058 metric tons) of $30 per pound of U 3 O 8 reserves are in the San Juan Basin, about 55% of the total $30 reserves in the United States. Thorium reserves and resources in New Mexico have not been adequately evaluated and are unknown. Over 1300 uranium and thorium occurrences are described in this report, about 400 of these have been examined in the field by the author. The occurrence descriptions include information on location, commodities, production, development, geology, and classification. Over 1000 citations are included in the bibliography and referenced in the occurrence descriptions. Production statistics for uranium mines that operated from 1948 to 1970 are also included. Mines that operated after 1970 are classified into production categories. 43 figures, 9 tables

  10. 48 CFR 52.214-21 - Descriptive Literature.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 2 2010-10-01 2010-10-01 false Descriptive Literature. 52....214-21 Descriptive Literature. As prescribed in 14.201-6(p)(1), insert the following provision: Descriptive Literature (APR 2002) (a) Descriptive literature, as used in this provision, means information...

  11. Locating Academic NGOs in the Knowledge Production Landscape

    Directory of Open Access Journals (Sweden)

    Pratyoush Onta

    2012-06-01

    Full Text Available Academic non-governmental organizations (NGOs are already one of the most important institutional sites of knowledge production in the countries of the global South. This article defines academic NGOs as those NGOs which produce not only documentation but also academically engaging articles, reports, edited volumes, bibliographies, journals and monographs. It argues that their growth in the recent decades has taken place amidst the mammoth growth in the number of NGOs in general for structural and personal reasons. A case study from Nepal is provided to illustrate, both at the level of procedures and at the level of outcomes, the kinds of contributions academic NGOs have made to the knowledge enterprise. The article ends by suggesting that the links between editorial control over what academic NGOs produce and the funding they receive are more complex than is usually assumed, and that the issue of their accountability needs to be rendered in a multiple-constituency model similar to that at work in conventional universities.DOI: http://dx.doi.org/10.3126/dsaj.v5i0.6356 Dhaulagiri Journal of Sociology and Anthropology Vol. 5, 2011: 49-80   

  12. Descriptive Characteristics of Concussions in National Football League Games, 2010-2011 to 2013-2014.

    Science.gov (United States)

    Clark, Michael D; Asken, Breton M; Marshall, Stephen W; Guskiewicz, Kevin M

    2017-03-01

    Despite a high reported incidence rate of concussion, little is known about the on-field characteristics of injurious head impacts in National Football League (NFL) games. To characterize on-field features (location, player position, and time during game) and biomechanical features (anticipation status, closing distance, impact location and type) associated with concussions in NFL games over a 4-season period (2010-2011 to 2013-2014). Descriptive epidemiology study. We analyzed video of a subset of reported, in-game concussions for the 2010-2011 to 2013-2014 seasons. These videos represented a sample of injuries that were diagnosed and reported on the same day and that could be clearly associated with an in-game collision as captured on video. We determined anticipation status, closing distance, impact location on the injured player's helmet, and impact type (helmet-to-helmet, helmet-to-body, or helmet-to-ground). Associations between these variables were analyzed by use of descriptive statistics and tests of association. A total of 871 diagnosed concussions were reported as occurring during NFL preseason, regular season, and postseason games for the 2010-2011, 2011-2012, 2012-2013, and 2013-2014 seasons. A total of 1324 games were played during this period, giving a concussion incidence rate of 0.658 per game (95% CI, 0.61-0.70). From the video-reviewed subset (n = 429; 49.3%), the majority of injurious impacts occurred with good anticipation (57.3%) and concussions in the NFL occurred through a diverse variety of mechanisms, surprisingly tended to be well-anticipated, and, also surprisingly, occurred with concussion were broadly distributed over the helmet. More concussions occurred during the second half of game play, but we do not have evidence to explain this finding.

  13. Internet Geo-Location

    Science.gov (United States)

    2017-12-01

    INTERNET GEO-LOCATION DUKE UNIVERSITY DECEMBER 2017 FINAL TECHNICAL REPORT APPROVED FOR PUBLIC RELEASE; DISTRIBUTION UNLIMITED STINFO COPY AIR...REPORT TYPE FINAL TECHNICAL REPORT 3. DATES COVERED (From - To) MAY 2014 – MAY 2017 4. TITLE AND SUBTITLE INTERNET GEO-LOCATION 5a. CONTRACT...of SpeedTest servers that are used by end users to measure the speed of their Internet connection. The servers log the IP address and the location

  14. FALDO: a semantic standard for describing the location of nucleotide and protein feature annotation.

    Science.gov (United States)

    Bolleman, Jerven T; Mungall, Christopher J; Strozzi, Francesco; Baran, Joachim; Dumontier, Michel; Bonnal, Raoul J P; Buels, Robert; Hoehndorf, Robert; Fujisawa, Takatomo; Katayama, Toshiaki; Cock, Peter J A

    2016-06-13

    Nucleotide and protein sequence feature annotations are essential to understand biology on the genomic, transcriptomic, and proteomic level. Using Semantic Web technologies to query biological annotations, there was no standard that described this potentially complex location information as subject-predicate-object triples. We have developed an ontology, the Feature Annotation Location Description Ontology (FALDO), to describe the positions of annotated features on linear and circular sequences. FALDO can be used to describe nucleotide features in sequence records, protein annotations, and glycan binding sites, among other features in coordinate systems of the aforementioned "omics" areas. Using the same data format to represent sequence positions that are independent of file formats allows us to integrate sequence data from multiple sources and data types. The genome browser JBrowse is used to demonstrate accessing multiple SPARQL endpoints to display genomic feature annotations, as well as protein annotations from UniProt mapped to genomic locations. Our ontology allows users to uniformly describe - and potentially merge - sequence annotations from multiple sources. Data sources using FALDO can prospectively be retrieved using federalised SPARQL queries against public SPARQL endpoints and/or local private triple stores.

  15. 21 CFR 163.145 - Mixed dairy product chocolates.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 2 2010-04-01 2010-04-01 false Mixed dairy product chocolates. 163.145 Section... § 163.145 Mixed dairy product chocolates. (a) Description. Mixed dairy product chocolates are the foods...; or (iv) Malted milk; and (2) The finished mixed dairy product chocolates shall contain not less than...

  16. Hanford Waste Vitrification Plant: Preliminary description of waste form and canister

    International Nuclear Information System (INIS)

    Mitchell, D.E.

    1986-01-01

    In July 1985, the US Department of Energy's Office of Civilian Radioactive Waste Management established the Waste Acceptance Process as the means by which defense high-level waste producers, such as the Hanford Waste Vitrification Plant, will develop waste acceptance requirements with the candidate geologic repositories. A complete description of the Waste Acceptance Process is contained in the Preliminary Hanford Waste Vitrification Plant Waste Form Qualification Plan. The Waste Acceptance Process defines three documents that high-level waste producers must prepare as a part of the process of assuming that a high-level waste product will be acceptable for disposal in a geologic repository. These documents are the Description of Waste Form and Canister, Waste Compliance Plan, and Waste Qualification Report. This document is the Hanford Waste Vitrification Plant Preliminary Description of Waste Form and Canister for disposal of Neutralized Current Acid Waste. The Waste Acceptance Specifications for the Hanford Waste Vitrification Plant have not yet been developed, therefore, this document has been structured to corresponds to the Waste Acceptance Preliminary Specifications for the Defense Waste Processing Facility High-Level Waste Form. Not all of the information required by these specifications is appropriate for inclusion in this Preliminary Description of Waste Form and Canister. Rather, this description is limited to information that describes the physical and chemical characteristics of the expected high-level waste form. The content of the document covers three major areas: waste form characteristics, canister characteristics, and canistered waste form characteristics. This information will be used by the candidate geologic repository projects as the basis for preliminary repository design activities and waste form testing. Periodic revisions are expected as the Waste Acceptance Process progresses

  17. Location Privacy with Randomness Consistency

    Directory of Open Access Journals (Sweden)

    Wu Hao

    2016-10-01

    Full Text Available Location-Based Social Network (LBSN applications that support geo-location-based posting and queries to provide location-relevant information to mobile users are increasingly popular, but pose a location-privacy risk to posts. We investigated existing LBSNs and location privacy mechanisms, and found a powerful potential attack that can accurately locate users with relatively few queries, even when location data is well secured and location noise is applied. Our technique defeats previously proposed solutions including fake-location detection and query rate limits.

  18. Software structure for tritium-in-air monitoring in classified locations

    International Nuclear Information System (INIS)

    Ionete, Eusebiu Ilarian; Benchea, Dumitru

    2009-01-01

    Full text: In the working areas of heavy water detritiation facilities, were hydrogen gas is generated, the risk of air-hydrogen explosive mixture production is present. This paper gives the description of a software architecture solution for a fixed area tritium-in-air monitoring system suitable to be used in such hazardous locations. Tritium-in-air monitoring system was designed as a distributed system containing a number of fixed tritium in air monitoring units, each of them being composed of an ionisation chamber flow-through type and a fix sampling unit with a number of sample lines and one additional blow line. For each unit, software and hardware architecture structure enable independent performance with a fail-safe concept, remote control operation and data storage in a DCS-DCU module. This software architecture secures the setting possibility of alarm levels for tritium concentration, graphical visualisation and acoustic alarm in the case of level overtaking. The afferent software architecture contains applications in connection with hardware architecture and with a hydrogen detection system: RU-1 software application for control sampling; RU-2 software application for measured values display; RU-3 software application for remote data display; RU-4 software application for SQL conversion server; RU-5 software application for OPC standard conversion. The interconnection of all hardware components, between each PLC and each display unit, between tritium-in-air monitoring units and PLC sampling units will be internally carried out using interfaces. The interconnection between PLCs and tritium-in-air monitoring DCU will be made using a communication network, for instance Ethernet Profibus or RS 485. (authors)

  19. Confidence assessment. Site-descriptive modelling SDM-Site Laxemar

    International Nuclear Information System (INIS)

    2009-06-01

    independent data from different disciplines. While some aspects have lower confidence this lack of confidence is handled by providing wider uncertainty ranges, bounding estimates and/or alternative models to repository engineering and long term safety assessment. It is judged that most, of the low confidence aspects have little impact on repository engineering design or for long-term safety. It may also be noted that the feedback requirements from SR-Can to the site modelling are now met in the completed site investigations, subject to levels of uncertainty that are viewed as acceptable. Only a few data points and a few types of data have been omitted from the modelling, mainly because they are judged less relevant and reliable than the data considered. Inclusion of data from outside the Laxemar subarea might have enhanced confidence in the regional model, but only at the locations of the data and these changes in confidence would have been of little significance in relation to implications for the local model area and would not, therefore, have been of any real significance to design or safety assessment. These omissions are judged to have little or no negative impact on confidence in the Laxemar subarea model. In fact, identification of unreliable data and their elimination should have a positive effect on confidence. Poor precision in the measured data is judged to have a limited impact on uncertainties in the site descriptive model, with the exceptions of interpretation and combination of borehole and outcrop fracture data and general uncertainties in sorption data

  20. Confidence assessment. Site-descriptive modelling SDM-Site Laxemar

    Energy Technology Data Exchange (ETDEWEB)

    2008-12-15

    independent data from different disciplines. While some aspects have lower confidence this lack of confidence is handled by providing wider uncertainty ranges, bounding estimates and/or alternative models to repository engineering and long term safety assessment. It is judged that most, of the low confidence aspects have little impact on repository engineering design or for long-term safety. It may also be noted that the feedback requirements from SR-Can to the site modelling are now met in the completed site investigations, subject to levels of uncertainty that are viewed as acceptable. Only a few data points and a few types of data have been omitted from the modelling, mainly because they are judged less relevant and reliable than the data considered. Inclusion of data from outside the Laxemar subarea might have enhanced confidence in the regional model, but only at the locations of the data and these changes in confidence would have been of little significance in relation to implications for the local model area and would not, therefore, have been of any real significance to design or safety assessment. These omissions are judged to have little or no negative impact on confidence in the Laxemar subarea model. In fact, identification of unreliable data and their elimination should have a positive effect on confidence. Poor precision in the measured data is judged to have a limited impact on uncertainties in the site descriptive model, with the exceptions of interpretation and combination of borehole and outcrop fracture data and general uncertainties in sorption data

  1. High Exposure Facility Technical Description

    Energy Technology Data Exchange (ETDEWEB)

    Carter, Gregory L.; Stithem, Arthur R.; Murphy, Mark K.; Smith, Alex K.

    2008-02-12

    The High Exposure Facility is a collimated high-level gamma irradiator that is located in the basement of the 318 building. It was custom developed by PNNL back in 1982 to meet the needs for high range radiological instrument calibrations and dosimeter irradiations. At the time no commercially available product existed that could create exposure rates up to 20,000 R/h. This document is intended to pass on the design criteria that was employed to create this unique facility, while maintaining compliance with ANSI N543-1974, "General Safety Standard for Installations Using Non-Medical X-Ray and Sealed Gamma-Ray Sources, Energies up to 10 MeV."

  2. Fuel failure detection and location methods in CAGRs

    International Nuclear Information System (INIS)

    Harris, A.M.

    1982-06-01

    The release of fission products from AGR fuel failures and the way in which the signals from such failures must be detected against the background signal from uranium contamination of the fuel is considered. Theoretical assessments of failure detection are used to show the limitations of the existing Electrostatic Wire Precipitator Burst Can Detection system (BCD) and how its operating parameters can be optimised. Two promising alternative methods, the 'split count' technique and the use of iodine measurements, are described. The results of a detailed study of the mechanical and electronic performance of the present BCD trolleys are given. The limited experience of detection and location of two fuel failures in CAGR using conventional and alternative methods is reviewed. The larger failure was detected and located using the conventional BCD equipment with a high confidence level. It is shown that smaller failures may not be easy to detect and locate using the current BCD equipment, and the second smaller failure probably remained in the reactor for about a year before it was discharged. The split count technique used with modified BCD equipment was able to detect the smaller failure after careful inspection of the data. (author)

  3. Heat penetration and thermocouple location in home canning.

    Science.gov (United States)

    Etzel, Mark R; Willmore, Paola; Ingham, Barbara H

    2015-01-01

    We processed applesauce, tomato juice, and cranberries in pint jars in a boiling water canner to test thermal processing theories against home canning of high-acid foods. For each product, thermocouples were placed at various heights in the jar. Values for f h (heating), f cl (cooling), and F 82.2°C (lethality) were determined for each thermocouple location, and did not depend substantially on thermocouple location in accordance with heat transfer theory. There was a cold spot in the jar, but the cold spot during heating became the hot spot during cooling. During heating, the geometric center was the last to heat, and remained coldest the longest, but during coooling, it was also the last to cool, and remained hottest the longest. The net effect was that calculated lethality in home canning was not affected by thermocouple location. Most of the lethality during home canning occurred during air cooling, making cooling of home canned foods of great importance. Calculated lethality was far greater than the required 5-log reduction of spores in tomato juice and vegetative cells in cranberries, suggesting a wide margin of safety for approved home-canning processes for high-acid foods.

  4. A definition, description, and framework for advanced practice in dietetics.

    Science.gov (United States)

    Wildish, Deborah Ellen Boyko; Evers, Susan

    2010-01-01

    We explored advanced practice (AP) across the diversity of dietetics to develop a definition, description, and framework for guiding future education, research agendas, and policy development. The process began with a literature review and discussion with dietitians exploring AP in other countries. Various concepts were identified, and these informed the phase 1 survey questions. Phase 1 was a 36-item survey created in SurveyMonkey, engaging a purposeful sample of key stakeholders (n=136). A modified Delphi approach, involving seven dietitians from different geographical locations and practice areas, finalized the phase 2 survey. An e-mail link to this 50-item survey was sent to a random sample of dietitians (n=885). The proposed AP framework entailed an iterative approach, integrating survey results with AP literature. Response rates were 40% for phase 1 and 35% for phase 2. In phase 1, 83% of respondents agreed that a depth and breadth definition captured all dietetic job roles, and 95% agreed that it differentiated AP from entry-level practice. Descriptive statistics are presented to provide demographic information and level of agreement with themes relevant to AP. A framework is presented, and discrepancies with phase 2 results indicate areas for professional development, such as leadership, mentorship, and outcome measurement.

  5. 40 CFR 446.10 - Applicability; description of the oil-base solvent wash paint subcategory.

    Science.gov (United States)

    2010-07-01

    ...-base solvent wash paint subcategory. 446.10 Section 446.10 Protection of Environment ENVIRONMENTAL...-Base Solvent Wash Paint Subcategory § 446.10 Applicability; description of the oil-base solvent wash... production of oil-base paint where the tank cleaning is performed using solvents. When a plant is subject to...

  6. Adolescents’ Awareness of Environmental Care: Experiences when Writing Short Descriptive Texts in English

    Directory of Open Access Journals (Sweden)

    Lorena Jaramillo Urrutia

    2011-01-01

    Full Text Available Today it is necessary to approach environmental topics with students in an interdisciplinary manner to mitigate the environmental damages that the Earth is suffering. In this paper we report an action-research and innovation study aimed at sensitizing students with respect to the care and preservation of the environment through the writing of short descriptive texts in English. The study had four stages: motivation, knowledge of ecological vocabulary, production of sentences and paragraphs, construction of short descriptive texts with the help of guidance questions and their publication in the school newspaper. The findings show that the procedure used in class promotes interdisciplinary work around environmental topics as well as the development of writing skills.

  7. Smartphones as locative media

    CERN Document Server

    Frith, Jordan

    2015-01-01

    Smartphone adoption has surpassed 50% of the population in more than 15 countries, and there are now more than one million mobile applications people can download to their phones. Many of these applications take advantage of smartphones as locative media, which is what allows smartphones to be located in physical space. Applications that take advantage of people's location are called location-based services, and they are the focus of this book. Smartphones as locative media raise important questions about how we understand the complicated relationship between the Internet and physical space

  8. Premodelling of the importance of the location of the upstream hydraulic boundary of a regional flow model of the Laxemar-Simpevarp area. Site descriptive modelling SDM-Site Laxemar

    International Nuclear Information System (INIS)

    Holmen, Johan G.

    2008-03-01

    The location of the westernmost hydraulic boundary of a regional groundwater flow model representing the Laxemar investigation area is of importance as the regional flow of groundwater is primarily from the west towards the sea (as given by the regional topography). If the westernmost boundary condition of a regional flow model is located to close to the investigation area, the regional flow model may underestimate the magnitude of the regional groundwater flow (at the investigation area), as well as overestimate breakthrough times of flow paths from the repository area, etc. Groundwater flows have been calculated by use of two mathematical (numerical) models: A very large groundwater flow model, much larger than the regional flow model used in the Laxemar site description version 1.2, and a smaller flow model that is of a comparable size to the regional model used in the site description. The models are identical except for the different horizontal extensions of the models; the large model extends to the west much further than the small model. The westernmost lateral boundary of the small model is a topographic water divide approx. 7 km from the central parts of the Laxemar investigation area, and the westernmost lateral boundary of the large model is a topographic water divide approx. 40 km from the central parts of the Laxemar investigation area. In the models the lateral boundaries are defined as no-flow boundaries. The objective of the study is to calculate and compare the groundwater flow properties at a tentative repository area at Laxemar; by use of a large flow model and a small flow model. The comparisons include the following three parameters: - Length of flow paths from the tentative repository area. - Advective breakthrough time for flow paths from the tentative repository area. - Magnitude of flow at the tentative repository area. The comparisons demonstrated the following considering the median values of the obtained distributions of flow paths

  9. Dealing with Insufficient Location Fingerprints in Wi-Fi Based Indoor Location Fingerprinting

    Directory of Open Access Journals (Sweden)

    Kai Dong

    2017-01-01

    Full Text Available The development of the Internet of Things has accelerated research in the indoor location fingerprinting technique, which provides value-added localization services for existing WLAN infrastructures without the need for any specialized hardware. The deployment of a fingerprinting based localization system requires an extremely large amount of measurements on received signal strength information to generate a location fingerprint database. Nonetheless, this requirement can rarely be satisfied in most indoor environments. In this paper, we target one but common situation when the collected measurements on received signal strength information are insufficient, and show limitations of existing location fingerprinting methods in dealing with inadequate location fingerprints. We also introduce a novel method to reduce noise in measuring the received signal strength based on the maximum likelihood estimation, and compute locations from inadequate location fingerprints by using the stochastic gradient descent algorithm. Our experiment results show that our proposed method can achieve better localization performance even when only a small quantity of RSS measurements is available. Especially when the number of observations at each location is small, our proposed method has evident superiority in localization accuracy.

  10. Proactive Modeling of Market, Product and Production Architectures

    DEFF Research Database (Denmark)

    Mortensen, Niels Henrik; Hansen, Christian Lindschou; Hvam, Lars

    2011-01-01

    This paper presents an operational model that allows description of market, products and production architectures. The main feature of this model is the ability to describe both structural and functional aspect of architectures. The structural aspect is an answer to the question: What constitutes...... the architecture, e.g. standard designs, design units and interfaces? The functional aspect is an answer to the question: What is the behaviour or the architecture, what is it able to do, i.e. which products at which performance levels can be derived from the architecture? Among the most important benefits...... of this model is the explicit ability to describe what the architecture is prepared for, and what it is not prepared for - concerning development of future derivative products. The model has been applied in a large scale global product development project. Among the most important benefits is contribution to...

  11. Law Enforcement Locations

    Data.gov (United States)

    Kansas Data Access and Support Center — Law Enforcement Locations in Kansas Any location where sworn officers of a law enforcement agency are regularly based or stationed. Law enforcement agencies "are...

  12. Theory of multinationals' choice of technique and locational decisions

    Energy Technology Data Exchange (ETDEWEB)

    de Meza, D.

    1979-01-01

    A neoclassical explanation is presented of the failure of multinational corporations (MNCs) to adapt their technology in low-wage countries. MNCs are found to employ more labor-intensive techniques and pay lower wages than companies serving only domestic markets if transport and tariff costs are present. Product locational decisions are also analyzed. 6 references.

  13. Rock mechanics site descriptive model-theoretical approach. Preliminary site description Forsmark area - version 1.2

    Energy Technology Data Exchange (ETDEWEB)

    Fredriksson, Anders; Olofsson, Isabelle [Golder Associates AB, Uppsala (Sweden)

    2005-12-15

    The present report summarises the theoretical approach to estimate the mechanical properties of the rock mass in relation to the Preliminary Site Descriptive Modelling, version 1.2 Forsmark. The theoretical approach is based on a discrete fracture network (DFN) description of the fracture system in the rock mass and on the results of mechanical testing of intact rock and on rock fractures. To estimate the mechanical properties of the rock mass a load test on a rock block with fractures is simulated with the numerical code 3DEC. The location and size of the fractures are given by DFN-realisations. The rock block was loaded in plain strain condition. From the calculated relationship between stresses and deformations the mechanical properties of the rock mass were determined. The influence of the geometrical properties of the fracture system on the mechanical properties of the rock mass was analysed by loading 20 blocks based on different DFN-realisations. The material properties of the intact rock and the fractures were kept constant. The properties are set equal to the mean value of each measured material property. The influence of the variation of the properties of the intact rock and variation of the mechanical properties of the fractures are estimated by analysing numerical load tests on one specific block (one DFN-realisation) with combinations of properties for intact rock and fractures. Each parameter varies from its lowest values to its highest values while the rest of the parameters are held constant, equal to the mean value. The resulting distribution was expressed as a variation around the value determined with mean values on all parameters. To estimate the resulting distribution of the mechanical properties of the rock mass a Monte-Carlo simulation was performed by generating values from the two distributions independent of each other. The two values were added and the statistical properties of the resulting distribution were determined.

  14. Rock mechanics site descriptive model-theoretical approach. Preliminary site description Forsmark area - version 1.2

    International Nuclear Information System (INIS)

    Fredriksson, Anders; Olofsson, Isabelle

    2005-12-01

    The present report summarises the theoretical approach to estimate the mechanical properties of the rock mass in relation to the Preliminary Site Descriptive Modelling, version 1.2 Forsmark. The theoretical approach is based on a discrete fracture network (DFN) description of the fracture system in the rock mass and on the results of mechanical testing of intact rock and on rock fractures. To estimate the mechanical properties of the rock mass a load test on a rock block with fractures is simulated with the numerical code 3DEC. The location and size of the fractures are given by DFN-realisations. The rock block was loaded in plain strain condition. From the calculated relationship between stresses and deformations the mechanical properties of the rock mass were determined. The influence of the geometrical properties of the fracture system on the mechanical properties of the rock mass was analysed by loading 20 blocks based on different DFN-realisations. The material properties of the intact rock and the fractures were kept constant. The properties are set equal to the mean value of each measured material property. The influence of the variation of the properties of the intact rock and variation of the mechanical properties of the fractures are estimated by analysing numerical load tests on one specific block (one DFN-realisation) with combinations of properties for intact rock and fractures. Each parameter varies from its lowest values to its highest values while the rest of the parameters are held constant, equal to the mean value. The resulting distribution was expressed as a variation around the value determined with mean values on all parameters. To estimate the resulting distribution of the mechanical properties of the rock mass a Monte-Carlo simulation was performed by generating values from the two distributions independent of each other. The two values were added and the statistical properties of the resulting distribution were determined

  15. St. James marine terminal facility description

    Energy Technology Data Exchange (ETDEWEB)

    1993-10-01

    The US Department of Energy (DOE) currently owns and operates a marine terminal on the west bank of the Mississippi River at St. James, Louisiana. The St. James facility was constructed by the Department to provide marine services associated with the fill and drawdown of the Strategic Petroleum Reserve (SPR) crude oil storage facilities located at Bayou Choctaw and Weeks Island, Louisiana. Although strategic to the mission of the SPR in the event of a national emergency, the St. James terminal is situated such that it has a high potential to also serve the commercial industry`s needs for crude oil terminalling and storage. The St. James terminal is located approximately 45 miles west of New Orleans and 30 miles southeast of Baton Rouge, and approximately 160 miles upstream from the mouth of the Mississippi River. Construction of the St. James terminal was initiated in 1978 and was completed in 1980. Since then, the terminal has received and transferred over 125 million barrels of crude oil to the SPR sites for storage. For crude oil distribution, the St. James terminal was connected to the neighboring LOCAP terminal by a 0.1 mile 36-inch pipeline in 1981 and to the Capline terminal by a 0.5 mile 30-inch pipeline in 1988. The terminal also has a 30-inch pipeline connection to the Koch oil terminal which was used for initial fill purposes; however, this pipeline has been disconnected and is currently inactive. A complete description of the St. James terminal facilities, operational capabilities, operational certifications, and future Government requirements are presented in Sections 2, 3, 4, and 5 respectively.

  16. Formal Specification and Description Language and Message Sequence Chart to Model and Validate Session Initiation Protocol Services

    OpenAIRE

    Sa'ed Abed; Mohammad H. Al Shayeji; Ovais Ahmed; Sahel Alouneh

    2016-01-01

    Session Initiation Protocol (SIP) is a signaling layer protocol for building, adjusting and ending sessions among participants including Internet conferences, telephone calls and multimedia distribution. SIP facilitates user movement by proxying and forwarding requests to the present location of the user. In this paper, we provide a formal Specification and Description Language (SDL) and Message Sequence Chart (MSC) to model and define the Internet Engineering Task Force (IETF) SIP protocol a...

  17. Simpevarp - site descriptive model version 0

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-11-01

    SICADA and SKB GIS, and an inventory and assessment of relevant data in other databases; a systematic overview of data needs and availability for developing a site descriptive model for the surface ecosystems (biosphere) in the Simpevarp regional model area; a more detailed treatment of the present data base for the geosphere in the Simpevarp regional model area, and its transformation into the format of a site descriptive model. V. 0 modelling is based on data available before the start of site investigations, mostly collected for reasons not directly related to the deep disposal of spent nuclear fuel. An important component of the present work, therefore, is a data inventory, in which the location and scope of all potential sources of data is detailed and evaluated with respect to prospective usefulness for future site descriptive modelling for deep disposal. This includes a general description of existing geographical data, of which most are stored in SKB GIS, a survey of data already stored in the SICADA database, and an inventory of other data sources, whose information content has not yet been evaluated and/or inserted in SICADA or SKB GIS. Data sources relevant to the Simpevarp regional model area which still, to some degree, need to be evaluated/converted/inserted include the siting and construction of spent fuel interim storage facility, CLAB, and the siting, pre-investigation, predictive modelling and construction of the Aespoe Hard Rock Laboratory. The present report describes the current level of knowledge of the surface ecosystems in the Simpevarp regional model area, in a highly condensed form. It refers to, and draws its examples from, a series of SKB background reports which have been produced since the completion of the Oskarshamn feasibility study, and a number of other sources of information which are gathered here for the first time. The data sources are outlined with reference to a series of functional ecosystem types: drainage areas, forest, wetland

  18. Forsmark - site descriptive model version 0

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-10-01

    area identified in the feasibility study as favourable for further study. This rectangular area has now been designated the Forsmark regional model area. An important component of the present work is a data inventory, in which the location and scope of all potential sources of data is detailed and evaluated with respect to prospective usefulness for future site descriptive modelling for deep disposal. Data sources relevant to the Forsmark regional model area which still, to some degree, need to be evaluated/converted/inserted include the siting and construction of the three nuclear reactors (Forsmark 1-3), the feasibility study for an underground spent nuclear fuel interim storage facility at Forsmark, the pre-investigations and construction of the SFR, and the SAFE project. The present report describes the current level of knowledge of the surface ecosystems in the Forsmark regional model area, in a highly condensed form. It refers to, and draws its examples from, a series of SKB background reports which have been produced since the completion of the Oesthammar feasibility study, and a number of other sources of information which are gathered here for the first time. The data sources are outlined with reference to a series of functional ecosystem types: drainage areas, forest, wetland, agricultural land, lakes and rivers, and sea, each further subdivided into appropriate entities. A systematic approach has been used, even though, at the current level of knowledge, the information in many subdivisions is inadequate or lacking. The aims of biosphere studies within the site investigation programme are to define baseline (preconstruction) conditions, to provide the necessary data base for the environmental impact statement, and to contribute to the dose estimations in the safety analysis. The main emphasis of the report is on the preparation of a site descriptive model, version 0, for the geosphere, since data acquisition and processing in this area, in contrast to the

  19. Repository for spent nuclear fuel. Preliminary construction description - layout D Oskarshamn the Simpevarp area

    International Nuclear Information System (INIS)

    2006-02-01

    This report presents the preliminary design of a repository located in the Simpevarp area. The description has been disposed so as to deal primarily with the site dependent layouts for the above- and underground constructions. The report is disposed as follows: c1 gives the background and some basic information. Chapter 2 presents the demands and necessary conditions that take precedence when adapting the plant to the local conditions, construction, operation and closure. Chapter 3 is a general description of the area, its infrastructure and the specific sites that have been studied. Chapter 4-5 describe the design of the plant for the two chosen sites. Chapter 6 gives a review of data for the plant, and Chapter 7 'References' is the last part of the main document. The appendices A-I give brief information on the general, non-site specific, parts of the plant, e.g. buildings, life cycle, system, operation and organization

  20. Repository for spent nuclear fuel. Preliminary construction description - layout D Oskarshamn the Laxemar area

    International Nuclear Information System (INIS)

    2006-05-01

    This report presents the preliminary design of a repository located in the Laxemar area. The description has been disposed so as to deal primarily with the site dependent layouts for the above- and underground constructions. The report is disposed as follows: Chapter 1 gives the background and some basic information. Chapter 2 presents the demands and necessary conditions that take precedence when adapting the plant to the local conditions, construction, operation and closure. Chapter 3 is a general description of the area, its infrastructure and the specific sites that have been studied. Chapters 4-5 describe the design of the plant for the two chosen sites. Chapter 6 gives a review of data for the plant, and Chapter 7 'References' is the last part of the main document. The appendices A-I give brief information on the general, non-site specific, parts of the plant, e.g. buildings, life cycle, system, operation and organization

  1. Combining product attributes with recommendation and shopping location attributes to assess consumer preferences for insect-based food products

    DEFF Research Database (Denmark)

    Alemu, Mohammed Hussen; Olsen, Søren Bøye; Vedel, Suzanne Elizabeth

    2017-01-01

    into consumers' preferences for termite-based food products (TBFPs) using data from a choice experiment survey in Kenya. A novel feature of this paper is that it investigates the combined effects of product-related and contextual attributes, as well as consumer attitudes on preferences for TBFPs. In addition......, the paper focuses on the extent to which preferences may be affected depending on the meal formats, i.e. whether the termites are introduced either as whole insects or as a processed component in a typical daily meal. The results suggest that consumers prefer TBFPs with high nutritional value and especially...... when they are recommended by officials. Results further indicate that affirmative recommendations are particularly important for the processed TBFP, and consumers prefer to buy this type of product in kiosks or supermarkets than at local marketplaces. Despite a considerable degree of preference...

  2. Consumer-based product profiling

    DEFF Research Database (Denmark)

    Giacalone, Davide; Ribeiro, Leticia Machado; Frøst, Michael Bom

    2013-01-01

    Napping® is an inexpensive and rapid method for sensory characterization, suitable for both trained and untrained subjects. In the study presented, the method was applied on 9 specialty beers. Subjects were 17 consumers without any training as sensory panelists, of whom 8 were beer experts and 9 ...... for sensory characterization, with the advantage of providing a product characterization based on consumer descriptions, thus better reflecting consumers’ experience with the product....

  3. A field theory description of constrained energy-dissipation processes

    International Nuclear Information System (INIS)

    Mandzhavidze, I.D.; Sisakyan, A.N.

    2002-01-01

    A field theory description of dissipation processes constrained by a high-symmetry group is given. The formalism is presented in the example of the multiple-hadron production processes, where the transition to the thermodynamic equilibrium results from the kinetic energy of colliding particles dissipating into hadron masses. The dynamics of these processes is restricted because the constraints responsible for the colour charge confinement must be taken into account. We develop a more general S-matrix formulation of the thermodynamics of nonequilibrium dissipative processes and find a necessary and sufficient condition for the validity of this description; this condition is similar to the correlation relaxation condition, which, according to Bogolyubov, must apply as the system approaches equilibrium. This situation must physically occur in processes with an extremely high multiplicity, at least if the hadron mass is nonzero. We also describe a new strong-coupling perturbation scheme, which is useful for taking symmetry restrictions on the dynamics of dissipation processes into account. We review the literature devoted to this problem

  4. Location model of specialized terminals for soybe an exports in Brazil

    Directory of Open Access Journals (Sweden)

    Alessandra Fraga Dubke

    2011-04-01

    Full Text Available The purpose of this work is the development of a location model for specialized terminals used as transshipment points in the supply chain of soybeans. The theoretical basis of the study relies on the association of a transshipment model with a multi-commodity, multi-facility capacitated location model. The shipping ports might be seen as specialized terminals that add value to the exported products by transforming raw soy grains into soy oil and soy meal. The proposed model also considers service activities in each terminal and the capacity of the maritime ports. Using representative data from the year 2004, the model is illustrated by a small case study, which considers six points of production in inland Brazil, all served by railways, one maritime port on the north and five on the east coast, and three destination ports in Europe and Asia. The study includes a rough sensitivity analysis regarding volumes, capacities, prices, and transportation costs

  5. Forsmark - site descriptive model version 0

    International Nuclear Information System (INIS)

    2002-10-01

    area identified in the feasibility study as favourable for further study. This rectangular area has now been designated the Forsmark regional model area. An important component of the present work is a data inventory, in which the location and scope of all potential sources of data is detailed and evaluated with respect to prospective usefulness for future site descriptive modelling for deep disposal. Data sources relevant to the Forsmark regional model area which still, to some degree, need to be evaluated/converted/inserted include the siting and construction of the three nuclear reactors (Forsmark 1-3), the feasibility study for an underground spent nuclear fuel interim storage facility at Forsmark, the pre-investigations and construction of the SFR, and the SAFE project. The present report describes the current level of knowledge of the surface ecosystems in the Forsmark regional model area, in a highly condensed form. It refers to, and draws its examples from, a series of SKB background reports which have been produced since the completion of the Oesthammar feasibility study, and a number of other sources of information which are gathered here for the first time. The data sources are outlined with reference to a series of functional ecosystem types: drainage areas, forest, wetland, agricultural land, lakes and rivers, and sea, each further subdivided into appropriate entities. A systematic approach has been used, even though, at the current level of knowledge, the information in many subdivisions is inadequate or lacking. The aims of biosphere studies within the site investigation programme are to define baseline (preconstruction) conditions, to provide the necessary data base for the environmental impact statement, and to contribute to the dose estimations in the safety analysis. The main emphasis of the report is on the preparation of a site descriptive model, version 0, for the geosphere, since data acquisition and processing in this area, in contrast to the

  6. How to Best Name a Place? Facilitation and Inhibition of Route Learning Due to Descriptive and Arbitrary Location Labels.

    Science.gov (United States)

    Meilinger, Tobias; Schulte-Pelkum, Jörg; Frankenstein, Julia; Hardiess, Gregor; Laharnar, Naima; Mallot, Hanspeter A; Bülthoff, Heinrich H

    2016-01-01

    Establishing verbal memory traces for non-verbal stimuli was reported to facilitate or inhibit memory for the non-verbal stimuli. We show that these effects are also observed in a domain not indicated before-wayfinding. Fifty-three participants followed a guided route in a virtual environment. They were asked to remember half of the intersections by relying on the visual impression only. At the other 50% of the intersections, participants additionally heard a place name, which they were asked to memorize. For testing, participants were teleported to the intersections and were asked to indicate the subsequent direction of the learned route. In Experiment 1, intersections' names were arbitrary (i.e., not related to the visual impression). Here, participants performed more accurately at unnamed intersections. In Experiment 2, intersections' names were descriptive and participants' route memory was more accurate at named intersections. Results have implications for naming places in a city and for wayfinding aids.

  7. How to best name a place? Facilitation and inhibition of route learning due to descriptive and arbitrary location labels

    Directory of Open Access Journals (Sweden)

    Tobias eMeilinger

    2016-02-01

    Full Text Available Establishing verbal memory traces for non-verbal stimuli was reported to facilitate or inhibit memory for the non-verbal stimuli. We show that these effects are also observed in a domain not indicated before – wayfinding. Fifty-three participants followed a guided route in a virtual environment. They were asked to remember half of the intersections by relying on the visual impression only. At the other 50% of the intersections, participants additionally heard a place name, which they were asked to memorize. For testing, participants were teleported to the intersections and were asked to indicate the subsequent direction of the learned route. In Experiment 1, intersections’ names were arbitrary (i.e., not related to the visual impression. Here, participants performed more accurately at unnamed intersections. In Experiment 2, intersections’ names were descriptive and participants’ route memory was more accurate at named intersections. Results have implications for naming places in a city and for wayfinding aids.

  8. Multi-Criteria Analysis for Solar Farm Location Suitability

    Science.gov (United States)

    Mierzwiak, Michal; Calka, Beata

    2017-12-01

    Currently the number of solar farms, as a type of renewable sources of energy, is growing rapidly. Photovoltaic power stations have many advantages, which is an incentive for their building and development. Solar energy is readily available and inexhaustible, and its production is environmentally friendly. In the present study multiple environmental and economic criteria were taken into account to select a potential photovoltaic farm location, with particular emphasis on: protected areas, land cover, solar radiation, slope angle, proximity to roads, built-up areas, and power lines. Advanced data analysis were used because of the multiplicity of criteria and their diverse influence on the choice of a potential location. They included the spatial analysis, the Weighted Linear Combination Technique (WLC), and the Analytic Hierarchy Process (AHP) as a decisionmaking method. The analysis was divided into two stages. In the first one, the areas where the location of solar farms was not possible were excluded. In the second one, the best locations meeting all environmental and economic criteria were selected. The research was conducted for the Legionowo District, using data from national surveying and mapping resources such as: BDOT10k (Database of Topographic Objects), NMT (Numerical Terrain Model), and lands and buildings register. Finally, several areas meeting the criteria were chosen. The research deals with solar farms with up to 40 kW power. The results of the study are presented as thematic maps. The advantage of the method is its versatility. It can be used not only for any area, but with little modification of the criteria, it can also be applied to choose a location for wind farms.

  9. Forterra Concrete Products, Inc.

    Science.gov (United States)

    The EPA is providing notice of a proposed Administrative Penalty Assessment against Forterra Concrete Products, Inc., a business located at 511 E. John Carpenter Freeway, Irving, TX, 75062, for alleged violations at its facility located at 23600 W. 40th St

  10. Location | FNLCR Staging

    Science.gov (United States)

    The Frederick National Laboratory for Cancer Research campus is located 50 miles northwest of Washington, D.C., and 50 miles west of Baltimore, Maryland, in Frederick, Maryland. Satellite locations include leased and government facilities extending s

  11. Locational Pricing to Mitigate Voltage Problems Caused by High PV Penetration

    Directory of Open Access Journals (Sweden)

    Sam Weckx

    2015-05-01

    Full Text Available In this paper, a locational marginal pricing algorithm is proposed to control the voltage in unbalanced distribution grids. The increasing amount of photovoltaic (PV generation installed in the grid may cause the voltage to rise to unacceptable levels during periods of low consumption. With locational prices, the distribution system operator can steer the reactive power consumption and active power curtailment of PV panels to guarantee a safe network operation. Flexible loads also respond to these prices. A distributed gradient algorithm automatically defines the locational prices that avoid voltage problems. Using these locational prices results in a minimum cost for the distribution operator to control the voltage. Locational prices can differ between the three phases in unbalanced grids. This is caused by a higher consumption or production in one of the phases compared to the other phases and provides the opportunity for arbitrage, where power is transferred from a phase with a low price to a phase with a high price. The effect of arbitrage is analyzed. The proposed algorithm is applied to an existing three-phase four-wire radial grid. Several simulations with realistic data are performed.

  12. Production Systems and Supplier Selection

    DEFF Research Database (Denmark)

    Pedraza-Acosta, Isabel; Pilkington, Alan; Barnes, David

    2016-01-01

    strategic stamping suppliers. Findings: Our contribution is the multi-phased production and product innovation process. This is an advance from traditional supplier selection and also an extension of ideas of supplier-located product development as it includes production system development, and complements...

  13. Privacy for location-based services

    CERN Document Server

    Ghinita, Gabriel

    2013-01-01

    Sharing of location data enables numerous exciting applications, such as location-based queries, location-based social recommendations, monitoring of traffic and air pollution levels, etc. Disclosing exact user locations raises serious privacy concerns, as locations may give away sensitive information about individuals' health status, alternative lifestyles, political and religious affiliations, etc. Preserving location privacy is an essential requirement towards the successful deployment of location-based applications. These lecture notes provide an overview of the state-of-the-art in locatio

  14. Modelling and description of PHEBUS FPT1 experiment with the computer code ASTEC

    International Nuclear Information System (INIS)

    Tusheva, P.; Kalchev, B.

    2005-01-01

    The PHEBUS Fission Product (FP) programme was initiated in 1988 after major severe reactor accidents (at Three Mile Island and Chernobyl). The main objective of the programme is to study the release, transport and retention of fission products in an in-pile facility under severe accident conditions in a LWR. This paper covers the FPT 1 experiment description and modelling by the ASTEC code. The main calculated events, the temperature evolution at the middle part of the test bundle, the state of the bundle degradation at the end of calculation and the calculated Hydrogen production are presented and discussed. The obtained results from the ASTEC code calculation show a good agreement between experimental and calculated results. The calculated Hydrogen production is slightly overestimated in comparison with the experimental results

  15. Memory and comprehension deficits in spatial descriptions of children with non-verbal and reading disabilities.

    Science.gov (United States)

    Mammarella, Irene C; Meneghetti, Chiara; Pazzaglia, Francesca; Cornoldi, Cesare

    2014-01-01

    The present study investigated the difficulties encountered by children with non-verbal learning disability (NLD) and reading disability (RD) when processing spatial information derived from descriptions, based on the assumption that both groups should find it more difficult than matched controls, but for different reasons, i.e., due to a memory encoding difficulty in cases of RD and to spatial information comprehension problems in cases of NLD. Spatial descriptions from both survey and route perspectives were presented to 9-12-year-old children divided into three groups: NLD (N = 12); RD (N = 12), and typically developing controls (TD; N = 15); then participants completed a sentence verification task and a memory for locations task. The sentence verification task was presented in two conditions: in one the children could refer to the text while answering the questions (i.e., text present condition), and in the other the text was withdrawn (i.e., text absent condition). Results showed that the RD group benefited from the text present condition, but was impaired to the same extent as the NLD group in the text absent condition, suggesting that the NLD children's difficulty is due mainly to their poor comprehension of spatial descriptions, while the RD children's difficulty is due more to a memory encoding problem. These results are discussed in terms of their implications in the neuropsychological profiles of children with NLD or RD, and the processes involved in spatial descriptions.

  16. Strategic closed-loop facility location problem with carbon market trading

    DEFF Research Database (Denmark)

    Diabat, A.; Abdallah, T.; Al-Refaie, A.

    2013-01-01

    and recovery of products in a closed-loop configuration. Remanufacturing is the basis of profit-oriented reverse logistics in which recovered products are restored to a marketable condition in order to be resold to the primary or secondary market. In this paper, we introduce a multiechelon multicommodity...... facility location problem with a trading price of carbon emissions and a cost of procurement. The company might either incur costs if the carbon cap, normally assigned by regulatory agencies, is lower than the total emissions, or gain profit if the carbon cap is higher than the total emissions. A numerical...

  17. A Study on Recommendation Systems in Location Based Social Networking

    Directory of Open Access Journals (Sweden)

    Ranganath Ashok Kumar

    2017-01-01

    Full Text Available Smart devices in the hands of people are revolutionizing the social lifestyle of one's self. Everyone across the world are using smart devices linked to their social networking activities one such activity is to share location data by uploading the tagged media content like photos, videos. The data is of surroundings, events attended/attending and travel experiences. Users share their experiences at a given location through localization techniques. Using such data from social networks an attempt is made to analyse tagged media content to acquire information on user context, individual’s interests, tastes, behaviours and derive meaningful relationships amongst them are referred to as Location Based Social Networks (LBSNs. The resulting information can be used to market a product and to improve business, as well recommend a travel and plan an itinerary. This paper presents a comprehensive survey of recommended systems for LBSNs covering the concepts of LBSNs, terminologies of LBSN and various recommendation systems.

  18. Decisions of hypermarkets location in dense urban area – effects on streets network congestion in the Bucharest case

    Directory of Open Access Journals (Sweden)

    Eugen ROSCA

    2008-01-01

    Full Text Available The paper represents some partial results of the research carried out by the Transportation, Traffic and Logistics Department - University POLITEHNICA of Bucharest, funded by the Romanian Ministry of Research and Education through the National University Research Council. In this paper we provide: a brief description of the interrelation between the life style changes of Romanian people during the last decades and the car traffic congestion in large cities; the streets network modelling of a radial-circular urban structure (the characteristic of a historically developed city as Bucharest city is, in case of car traffic congestion; the assessment model of the additional car traffic congestion for certain locations with large attractivity. Having an important effect on the entire lifestyle of urban people, the decision of a hypermarket location might be a complex one, taking into consideration the new leisure and shopping tendencies but also the additional car traffic congestion caused by the chosen location.

  19. Audio Description as a Pedagogical Tool

    Directory of Open Access Journals (Sweden)

    Georgina Kleege

    2015-05-01

    Full Text Available Audio description is the process of translating visual information into words for people who are blind or have low vision. Typically such description has focused on films, museum exhibitions, images and video on the internet, and live theater. Because it allows people with visual impairments to experience a variety of cultural and educational texts that would otherwise be inaccessible, audio description is a mandated aspect of disability inclusion, although it remains markedly underdeveloped and underutilized in our classrooms and in society in general. Along with increasing awareness of disability, audio description pushes students to practice close reading of visual material, deepen their analysis, and engage in critical discussions around the methodology, standards and values, language, and role of interpretation in a variety of academic disciplines. We outline a few pedagogical interventions that can be customized to different contexts to develop students' writing and critical thinking skills through guided description of visual material.

  20. A description of smallholder pig production systems in eastern Indonesia.

    Science.gov (United States)

    Leslie, Edwina E C; Geong, Maria; Abdurrahman, Muktasam; Ward, Michael P; Toribio, Jenny-Ann L M L

    2015-03-01

    Pig farming is a common practice among smallholder farmers in Nusa Tenggara Timur province (NTT), eastern Indonesia. To understand their production systems a survey of smallholder pig farmers was conducted. Eighteen villages were randomly selected across West Timor, Flores and Sumba islands, and 289 pig farmers were interviewed. Information on pig management, biosecurity practices, pig movements and knowledge of pig health and disease, specifically classical swine fever was collected. The mean number of pigs per herd was 5.0 (not including piglets), and total marketable herd size (pigs≥two months of age) did not differ significantly between islands (P=0.215). Chickens (71%) and dogs (62%) were the most commonly kept animal species in addition to pigs. Pigs were mainly kept as a secondary income source (69%) and 83% of farmers owned at least one sow. Seventy-four percent (74%) of pigs were housed in a kandang (small bamboo pen) and 25% were tethered. Pig feeds were primarily locally sourced agricultural products (93%). The majority of farmers had no knowledge of classical swine fever (91%) and biosecurity practices were minimal. Forty-five percent (45%) reported to consuming a pig when it died and 74% failed to report cases of sick or dead pigs to appropriate authorities. Sixty-five percent (65%) of farmers reported that a veterinarian or animal health worker had never visited their village. Backyard slaughter was common practice (55%), with meat mainly used for home consumption (89%). Most (73%) farmers purchased pigs in order to raise the animal on their farm with 36% purchasing at least one pig within the last year. Predominantly fattener pigs (34%) were given as gifts for celebratory events, most commonly for funerals (32%), traditional ceremonies (27%) and marriages (10%). For improved productivity of this traditional low-input system, research incorporating farming training and improved knowledge on pig disease and biosecurity needs to be integrated with

  1. About peculiarities of hydrocarbons deposits location in the productive series of the Baku archipelago area

    International Nuclear Information System (INIS)

    Gasanov, V.T.

    2002-01-01

    Full text : In Azerbaijan domestic and foreign companies hold wide-scaled prospecting operations in the central and southern parts of the Baku Archipelago and also in the Kobystan. There are hydrocarbons deposits determined in the northern of the Baku Archipelago. Deposits location by phase condition of hydrocarbons mainly follows the general regularity determined on many oil and gas bearing areas, pass of oil deposits to oil-gas and gas-condensate ones in the direction of increase of layers occurrence depth. There is also a considerable influence of a tectonic factor on the area location of deposits observed, expressing in difference of deposits height on different tectonic blocks and also there is an influence of a lithological factor. Results of works conducted on drilling and wells testing are still not enough for judging about lack of oil and gas content.

  2. Residential Location, Job Location, and Wages: Theory and Empirics

    DEFF Research Database (Denmark)

    Vejlin, Rune Majlund

    -to-job transition without changing workplace location. However, workers making a job-to-job transition which makes the workplace location closer to the residence experiences a wage drop. Furthermore, low wage workers and workers with high transportation costs are more likely to make job-to-job transitions, but also......I develop a stylized partial on-the-job equilibrium search model which incorporate a spatial dimension. Workers reside on a circle and can move at a cost. Each point on the circle has a wage distribution. Implications about wages and job mobility are drawn from the model and tested on Danish...... matched employer-employee data. The model predictions hold true. I find that workers working farther away from their residence earn higher wages. When a worker is making a job-to-job transition where he changes workplace location he experiences a higher wage change than a worker making a job...

  3. Location-Allocation model for food industrial using fuzzy criteria: A case study of dairy industry

    Directory of Open Access Journals (Sweden)

    Zahra Esfandiyari

    2011-07-01

    Full Text Available A good facility layout plays an important role on increasing the profitability of a production unit. A good location needs to meet different criteria such as the distance between the plants and the places to reach raw materials, customers, etc. In this paper, we proposed a multi criteria decision making problem to locate a suitable dairy plant. We assume that all factors influencing the plant involves uncertainty and proposed fuzzy numbers to handle the uncertainty associated with all input parameters. We apply the method for a real-world case study of dairy production unit and analyze the results of our proposed model.

  4. Location-based Scheduling

    DEFF Research Database (Denmark)

    Andersson, Niclas; Christensen, Knud

    on the market. However, CPM is primarily an activity based method that takes the activity as the unit of focus and there is criticism raised, specifically in the case of construction projects, on the method for deficient management of construction work and continuous flow of resources. To seek solutions...... to the identified limitations of the CPM method, an alternative planning and scheduling methodology that includes locations is tested. Location-based Scheduling (LBS) implies a shift in focus, from primarily the activities to the flow of work through the various locations of the project, i.e. the building. LBS uses...... the graphical presentation technique of Line-of-balance, which is adapted for planning and management of work-flows that facilitates resources to perform their work without interruptions caused by other resources working with other activities in the same location. As such, LBS and Lean Construction share...

  5. Identifiability of location and magnitude of flow barriers in slightly compressible flow

    NARCIS (Netherlands)

    Kahrobaei, S.; Mansoori Habib Abadi, M.; Joosten, G.J.P.; Hof, Van den P.M.J.; Jansen, J.D.

    2015-01-01

    Classic identifiability analysis of flow barriers in incompressible single-phase flow reveals that it is not possible to identify the location and permeability of low-permeability barriers from production data (wellbore pressures and rates), and that only averaged reservoir properties in between

  6. Identifiability of location and magnitude of flow barriers in slightly compressible flow

    NARCIS (Netherlands)

    Kahrobaei, S.; Mansoori Habib Abadi, M.; Joosten, G.J.P.; Van den Hof, P.; Jansen, J.D.

    2016-01-01

    Classic identifiability analysis of flow barriers in incompressible single-phase flow reveals that it is not possible to identify the location and permeability of low-permeability barriers from production data (wellbore pressures and rates), and that only averaged reservoir properties in between

  7. Montana's forest products industry and timber harvest, 2004

    Science.gov (United States)

    Timothy P. Spoelma; Todd A. Morgan; Thale Dillon; Alfred L. Chase; Charles E. Keegan; Larry T. DeBlander

    2008-01-01

    This report traces the flow of Montana's 2004 timber harvest through the primary wood-using industries; provides a description of the structure, capacity, and condition of Montana's primary forest products industry; and quantifies volumes and uses of wood fiber. Historical wood products industry changes are discussed, as well as changes in harvest, production...

  8. Lattice location of impurities in silicon Carbide

    CERN Document Server

    AUTHOR|(CDS)2085259; Correia Martins, João Guilherme

    The presence and behaviour of transition metals (TMs) in SiC has been a concern since the start of producing device-grade wafers of this wide band gap semiconductor. They are unintentionally introduced during silicon carbide (SiC) production, crystal growth and device manufacturing, which makes them difficult contaminants to avoid. Once in SiC they easily form deep levels, either when in the isolated form or when forming complexes with other defects. On the other hand, using intentional TM doping, it is possible to change the electrical, optical and magnetic properties of SiC. TMs such as chromium, manganese or iron have been considered as possible candidates for magnetic dopants in SiC, if located on silicon lattice sites. All these issues can be explored by investigating the lattice site of implanted TMs. This thesis addresses the lattice location and thermal stability of the implanted TM radioactive probes 56Mn, 59Fe, 65Ni and 111Ag in both cubic 3C- and hexagonal 6H SiC polytypes by means of emission cha...

  9. 4 CFR 202.1 - Description.

    Science.gov (United States)

    2010-01-01

    ... further encircled by a ring bearing the gold-colored words “RECOVERY ACCOUNTABILITY AND TRANSPARENCY... 4 Accounts 1 2010-01-01 2010-01-01 false Description. 202.1 Section 202.1 Accounts RECOVERY ACCOUNTABILITY AND TRANSPARENCY BOARD OFFICIAL SEAL § 202.1 Description. (a) The official seal of the Recovery...

  10. Hot Spot Removal System: System description

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-09-01

    Hazardous wastes contaminated with radionuclides, chemicals, and explosives exist across the Department of Energy complex and need to be remediated due to environmental concerns. Currently, an opportunity is being developed to dramatically reduce remediation costs and to assist in the acceleration of schedules associated with these wastes by deploying a Hot Spot Removal System. Removing the hot spot from the waste site will remove risk driver(s) and enable another, more cost effective process/option/remedial alternative (i.e., capping) to be applied to the remainder of the site. The Hot Spot Removal System consists of a suite of technologies that will be utilized to locate and remove source terms. Components of the system can also be used in a variety of other cleanup activities. This Hot Spot Removal System Description document presents technologies that were considered for possible inclusion in the Hot Spot Removal System, technologies made available to the Hot Spot Removal System, industrial interest in the Hot Spot Removal System`s subsystems, the schedule required for the Hot Spot Removal System, the evaluation of the relevant technologies, and the recommendations for equipment and technologies as stated in the Plan section.

  11. Hot Spot Removal System: System description

    International Nuclear Information System (INIS)

    1997-09-01

    Hazardous wastes contaminated with radionuclides, chemicals, and explosives exist across the Department of Energy complex and need to be remediated due to environmental concerns. Currently, an opportunity is being developed to dramatically reduce remediation costs and to assist in the acceleration of schedules associated with these wastes by deploying a Hot Spot Removal System. Removing the hot spot from the waste site will remove risk driver(s) and enable another, more cost effective process/option/remedial alternative (i.e., capping) to be applied to the remainder of the site. The Hot Spot Removal System consists of a suite of technologies that will be utilized to locate and remove source terms. Components of the system can also be used in a variety of other cleanup activities. This Hot Spot Removal System Description document presents technologies that were considered for possible inclusion in the Hot Spot Removal System, technologies made available to the Hot Spot Removal System, industrial interest in the Hot Spot Removal System''s subsystems, the schedule required for the Hot Spot Removal System, the evaluation of the relevant technologies, and the recommendations for equipment and technologies as stated in the Plan section

  12. Location condition of nuclear power generation at a viewpoint of location area

    International Nuclear Information System (INIS)

    Kawase, Kazuharu

    1999-01-01

    In the thirty years memorial meeting of the National Nuclear Power Generation located Commune Conference (NNGC) held in October, 1998, an extremely important fact was clarified, relation deeply to main aim of NNGC that permanent development was not promised at the location area even if a nuclear power plant was constructed there. Therefore, it is required that Japan government receives operation of three laws on electric source development as soon as possible, establishes a basic target on permanent area promotion in the nuclear power generation located commune, realizes some examples on development of the commune together with nuclear power generation and intends to promoted its location. (G.K.)

  13. Description of Project Sapphire. Revision 1

    International Nuclear Information System (INIS)

    Taylor, R.G.

    1995-01-01

    The mission of Project Sapphire was to repackage approximately 600 kg of highly enriched uranium (HEU) in the Republic of Kazakhstan into internationally acceptable shipping packages and transport the material to a storage location in the United States. There were four material types to be repackaged: metal; oxide; uranium/beryllium (U/Be) alloy; and residues from U/Be alloy production. Seven major steps described in this report were necessary for successful execution of the project: planning and training; readiness assessment; deployment; set up; process; take down; and transport. Nuclear criticality safety especially affected several of these steps

  14. Gene Locater

    DEFF Research Database (Denmark)

    Anwar, Muhammad Zohaib; Sehar, Anoosha; Rehman, Inayat-Ur

    2012-01-01

    software's for calculating recombination frequency is mostly limited to the range and flexibility of this type of analysis. GENE LOCATER is a fully customizable program for calculating recombination frequency, written in JAVA. Through an easy-to-use interface, GENE LOCATOR allows users a high degree...... of flexibility in calculating genetic linkage and displaying linkage group. Among other features, this software enables user to identify linkage groups with output visualized graphically. The program calculates interference and coefficient of coincidence with elevated accuracy in sample datasets. AVAILABILITY...

  15. Locating overlap information in quantum systems

    International Nuclear Information System (INIS)

    Albrecht, A.

    1994-01-01

    When discussing the black hole information problem the term ''information flow'' is frequently used in a rather loose fashion. In this paper I attempt to make this notion more concrete. I consider a Hilbert space which is constructed as a tensor product of two subspaces (representing, for example, inside and outside the black hole). I discuss how the system has the capacity to contain information which is in neither of the subspaces. I attempt to quantify the amount of information located in each of the two subspaces, and elsewere, and analyze the exent to which unitary evolution can correspond to ''information flow.'' I define the notion of ''overlap information'' which appears to be well suited to the problem

  16. United States paper, paperboard, and market pulp capacity trends by process and location, 1970-2000

    Science.gov (United States)

    Peter J. Ince; Xiaolei Li; Mo Zhou; Joseph Buongiorno; Mary Reuter

    This report presents a relational database with estimates of annual production capacity for all mill locations in the United States where paper, paperboard, or market pulp were produced from 1970 to 2000. Data for more than 500 separate mill locations are included in the database, with annual capacity data for each year from 1970 to 2000 (more than 17, 000 individual...

  17. Detection and Production of Methane Hydrate

    Energy Technology Data Exchange (ETDEWEB)

    George Hirasaki; Walter Chapman; Gerald Dickens; Colin Zelt; Brandon Dugan; Kishore Mohanty; Priyank Jaiswal

    2011-12-31

    This project seeks to understand regional differences in gas hydrate systems from the perspective of as an energy resource, geohazard, and long-term climate influence. Specifically, the effort will: (1) collect data and conceptual models that targets causes of gas hydrate variance, (2) construct numerical models that explain and predict regional-scale gas hydrate differences in 2-dimensions with minimal 'free parameters', (3) simulate hydrocarbon production from various gas hydrate systems to establish promising resource characteristics, (4) perturb different gas hydrate systems to assess potential impacts of hot fluids on seafloor stability and well stability, and (5) develop geophysical approaches that enable remote quantification of gas hydrate heterogeneities so that they can be characterized with minimal costly drilling. Our integrated program takes advantage of the fact that we have a close working team comprised of experts in distinct disciplines. The expected outcomes of this project are improved exploration and production technology for production of natural gas from methane hydrates and improved safety through understanding of seafloor and well bore stability in the presence of hydrates. The scope of this project was to more fully characterize, understand, and appreciate fundamental differences in the amount and distribution of gas hydrate and how this would affect the production potential of a hydrate accumulation in the marine environment. The effort combines existing information from locations in the ocean that are dominated by low permeability sediments with small amounts of high permeability sediments, one permafrost location where extensive hydrates exist in reservoir quality rocks and other locations deemed by mutual agreement of DOE and Rice to be appropriate. The initial ocean locations were Blake Ridge, Hydrate Ridge, Peru Margin and GOM. The permafrost location was Mallik. Although the ultimate goal of the project was to understand

  18. Quality Assurance Based on Descriptive and Parsimonious Appearance Models

    DEFF Research Database (Denmark)

    Nielsen, Jannik Boll; Eiríksson, Eyþór Rúnar; Kristensen, Rasmus Lyngby

    2015-01-01

    In this positional paper, we discuss the potential benefits of using appearance models in additive manufacturing, metal casting, wind turbine blade production, and 3D content acquisition. Current state of the art in acquisition and rendering of appearance cannot easily be used for quality assurance...... in these areas. The common denominator is the need for descriptive and parsimonious appearance models. By ‘parsimonious’ we mean with few parameters so that a model is useful both for fast acquisition, robust fitting, and fast rendering of appearance. The word ‘descriptive’ refers to the fact that a model should...

  19. Quantum Description of Optical Devices Used in Interferometry

    Directory of Open Access Journals (Sweden)

    P. Kucera

    2007-09-01

    Full Text Available A quantum-mechanical description of the phase shifters, retarders, mirrors and beam splitters is given in the paper. The description is then applied on two types of states. On a coherent state, a classical-like state, and on a number state, hence the strict quantum state. The quantum description of a beam splitter can be found in the literature. However the description does not treat with the polarization concept. The paper is aimed to introduce quantum description of an arbitrary oriented retarder and give a description of a beam splitter which treats with the polarization.

  20. Improving product development practice: An action-research based approach

    DEFF Research Database (Denmark)

    Harmsen, Hanne

    In studies of new product development it has often been concluded that to a large extent new product suc-cess is tunder the influence of companies and long lists of direct norma-tive guide-lines have been formulated. Nevertheless descriptive studi that deve-lopment practice is still far from...... studies both purely descriptive and studies identifying success and failure factors, but almost no studies of how companies actually undertake improve-ments, which problems they encounter,, and how/whether they overcome these problems. Action research is proposed as a suitable method for studying...

  1. Strategy for a numerical Rock Mechanics Site Descriptive Model. Further development of the theoretical/numerical approach

    International Nuclear Information System (INIS)

    Olofsson, Isabelle; Fredriksson, Anders

    2005-05-01

    The Swedish Nuclear and Fuel Management Company (SKB) is conducting Preliminary Site Investigations at two different locations in Sweden in order to study the possibility of a Deep Repository for spent fuel. In the frame of these Site Investigations, Site Descriptive Models are achieved. These products are the result of an interaction of several disciplines such as geology, hydrogeology, and meteorology. The Rock Mechanics Site Descriptive Model constitutes one of these models. Before the start of the Site Investigations a numerical method using Discrete Fracture Network (DFN) models and the 2D numerical software UDEC was developed. Numerical simulations were the tool chosen for applying the theoretical approach for characterising the mechanical rock mass properties. Some shortcomings were identified when developing the methodology. Their impacts on the modelling (in term of time and quality assurance of results) were estimated to be so important that the improvement of the methodology with another numerical tool was investigated. The theoretical approach is still based on DFN models but the numerical software used is 3DEC. The main assets of the programme compared to UDEC are an optimised algorithm for the generation of fractures in the model and for the assignment of mechanical fracture properties. Due to some numerical constraints the test conditions were set-up in order to simulate 2D plane strain tests. Numerical simulations were conducted on the same data set as used previously for the UDEC modelling in order to estimate and validate the results from the new methodology. A real 3D simulation was also conducted in order to assess the effect of the '2D' conditions in the 3DEC model. Based on the quality of the results it was decided to update the theoretical model and introduce the new methodology based on DFN models and 3DEC simulations for the establishment of the Rock Mechanics Site Descriptive Model. By separating the spatial variability into two parts, one

  2. Soft Biometrics; Human Identification Using Comparative Descriptions.

    Science.gov (United States)

    Reid, Daniel A; Nixon, Mark S; Stevenage, Sarah V

    2014-06-01

    Soft biometrics are a new form of biometric identification which use physical or behavioral traits that can be naturally described by humans. Unlike other biometric approaches, this allows identification based solely on verbal descriptions, bridging the semantic gap between biometrics and human description. To permit soft biometric identification the description must be accurate, yet conventional human descriptions comprising of absolute labels and estimations are often unreliable. A novel method of obtaining human descriptions will be introduced which utilizes comparative categorical labels to describe differences between subjects. This innovative approach has been shown to address many problems associated with absolute categorical labels-most critically, the descriptions contain more objective information and have increased discriminatory capabilities. Relative measurements of the subjects' traits can be inferred from comparative human descriptions using the Elo rating system. The resulting soft biometric signatures have been demonstrated to be robust and allow accurate recognition of subjects. Relative measurements can also be obtained from other forms of human representation. This is demonstrated using a support vector machine to determine relative measurements from gait biometric signatures-allowing retrieval of subjects from video footage by using human comparisons, bridging the semantic gap.

  3. Market-Oriented Product Innovation in Small Firms

    NARCIS (Netherlands)

    Verhees, F.J.H.M.

    2005-01-01

    Description: This thesis deals with product-innovation in small firms. It aims at a better understanding of the determinants of product innovation in small firms, particularly those determinants that are related to the market orientation of small firms. The focus of the study is on small firms that

  4. Demosponge diversity from North Sulawesi, with the description of six new species

    Directory of Open Access Journals (Sweden)

    Barbara Calcinai

    2017-06-01

    Full Text Available Sponges are key components of the benthic assemblages and play an important functional role in many ecosystems, especially in coral reefs. The Indonesian coral reefs, located within the so-called “coral triangle”, are among the richest in the world. However, the knowledge of the diversity of sponges and several other marine taxa is far from being complete in the area. In spite of this great biodiversity, most of the information on Indonesian sponges is scattered in old and fragmented literature and comprehensive data about their diversity are still lacking. In this paper, we report the presence of 94 species recorded during different research campaigns mainly from the Marine Park of Bunaken, North Sulawesi. Six species are new for science and seven represent new records for the area. Several others are very poorly known species, sometimes recorded for the second time after their description. For most species, besides field data and detailed descriptions, pictures in vivo are included. Moreover, two new symbiotic sponge associations are described. This work aims to increase the basic knowledge of Indonesian sponge diversity as a prerequisite for monitoring and conservation of this valuable taxon.

  5. Taeniasis in non-descript dogs in Ngorongoro, Tanzania: Prevalence and predisposing factors.

    Science.gov (United States)

    Swai, Emmanuel S; Miran, Miran B; Kasuku, Ayubu A; Nzalawahe, Jahashi

    2016-05-24

    The prevalence of taeniasis was determined during the period January to April 2013 in a cross-sectional study of non-descript domestic dogs from the livestock-wildlife ecosystem of Ngorongoro, Tanzania. Taeniid eggs were determined by screening faecal samples using the formalin-ether sedimentation technique. Predisposing factors for dog infection were assessed in relation to demographic, husbandry and management data. Of the 205 faecal samples screened, 150 (73.2%) were positive for taeniid eggs. The prevalence of dogs harbouring taeniid eggs was 80%, 30.2% and 75.3% in the less than 1 year, 1-3 years and greater than 3 years of age groups, respectively. Age group and sex prevalence in dogs did not differ significantly (P > 0.05), although the females showed a marginally higher prevalence (73.8%) in comparison to the males (72.7%). Taeniid eggs were significantly more likely to be found in the faeces of dogs located in Waso (80.6%) and Endulen (75%) than in Malambo (63.2%, P taeniasis is prevalent among non-descript dogs in Ngorongoro, underscoring the need for further research and active surveillance to better understand the transmission cycle of Taenia spp. in a wider geographical area in Tanzania.

  6. Solving seismological problems using SGRAPH program: I-source parameters and hypocentral location

    International Nuclear Information System (INIS)

    Abdelwahed, Mohamed F.

    2012-01-01

    SGRAPH program is considered one of the seismological programs that maintain seismic data. SGRAPH is considered unique for being able to read a wide range of data formats and manipulate complementary tools in different seismological subjects in a stand-alone Windows-based application. SGRAPH efficiently performs the basic waveform analysis and solves advanced seismological problems. The graphical user interface (GUI) utilities and the Windows facilities such as, dialog boxes, menus, and toolbars simplified the user interaction with data. SGRAPH supported the common data formats like, SAC, SEED, GSE, ASCII, and Nanometrics Y-format, and others. It provides the facilities to solve many seismological problems with the built-in inversion and modeling tools. In this paper, I discuss some of the inversion tools built-in SGRAPH related to source parameters and hypocentral location estimation. Firstly, a description of the SGRAPH program is given discussing some of its features. Secondly, the inversion tools are applied to some selected events of the Dahshour earthquakes as an example of estimating the spectral and source parameters of local earthquakes. In addition, the hypocentral location of these events are estimated using the Hypoinverse 2000 program operated by SGRAPH.

  7. Cold Vacuum Drying Instrument Air System Design Description. System 12

    International Nuclear Information System (INIS)

    SHAPLEY, B.J.; TRAN, Y.S.

    2000-01-01

    This system design description (SDD) addresses the instrument air (IA) system of the spent nuclear fuel (SNF). This IA system provides instrument quality air to the Cold Vacuum Drying (CVD) Facility. The IA system is a general service system that supports the operation of the heating, ventilation, and air conditioning (HVAC) system, the process equipment skids, and process instruments in the CVD Facility. The following discussion is limited to the compressor, dryer, piping, and valving that provide the IA as shown in Drawings H-1-82222, Cold Vacuum Drying Facility Mechanical Utilities Compressed and Instrument Air PandID, and H-1.82161, Cold Vacuum Drying Facility Process Equipment Skid PandID MCO/Cusk Interface. Figure 1-1 shows the physical location of the 1A system in the CVD Facility

  8. Cold Vacuum Drying Instrument Air System Design Description (SYS 12)

    Energy Technology Data Exchange (ETDEWEB)

    SHAPLEY, B.J.; TRAN, Y.S.

    2000-06-05

    This system design description (SDD) addresses the instrument air (IA) system of the spent nuclear fuel (SNF). This IA system provides instrument quality air to the Cold Vacuum Drying (CVD) Facility. The IA system is a general service system that supports the operation of the heating, ventilation, and air conditioning (HVAC) system, the process equipment skids, and process instruments in the CVD Facility. The following discussion is limited to the compressor, dryer, piping, and valving that provide the IA as shown in Drawings H-1-82222, Cold Vacuum Drying Facility Mechanical Utilities Compressed & Instrument Air P&ID, and H-1.82161, Cold Vacuum Drying Facility Process Equipment Skid P&ID MCO/Cusk Interface. Figure 1-1 shows the physical location of the 1A system in the CVD Facility.

  9. System design description for the whole element furnace testing system

    International Nuclear Information System (INIS)

    Ritter, G.A.; Marschman, S.C.; MacFarlan, P.J.; King, D.A.

    1998-05-01

    This document provides a detailed description of the Hanford Spent Nuclear Fuel (SNF) Whole Element Furnace Testing System located in the Postirradiation Testing Laboratory G-Cell (327 Building). Equipment specifications, system schematics, general operating modes, maintenance and calibration requirements, and other supporting information are provided in this document. This system was developed for performing cold vacuum drying and hot vacuum drying testing of whole N-Reactor fuel elements, which were sampled from the 105-K East and K West Basins. The proposed drying processes are intended to allow dry storage of the SNF for long periods of time. The furnace testing system is used to evaluate these processes by simulating drying sequences with a single fuel element and measuring key system parameters such as internal pressures, temperatures, moisture levels, and off-gas composition

  10. 48 CFR 14.202-5 - Descriptive literature.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Descriptive literature. 14... CONTRACTING METHODS AND CONTRACT TYPES SEALED BIDDING Solicitation of Bids 14.202-5 Descriptive literature. (a) Policy. Contracting officers must not require bidders to furnish descriptive literature unless it is...

  11. 48 CFR 514.202-5 - Descriptive literature.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 4 2010-10-01 2010-10-01 false Descriptive literature... CONTRACTING METHODS AND CONTRACT TYPES SEALED BIDDING Solicitation of Bids 514.202-5 Descriptive literature... FAR 52.211-6 satisfies the requirement for descriptive literature. [74 FR 47739, Sept. 17, 2009] ...

  12. 75 FR 29155 - Publicly Available Consumer Product Safety Information Database

    Science.gov (United States)

    2010-05-24

    ... consumer product incident reports involving a description of incidents related to the use of consumer... consumer product must include a word or phrase sufficient to distinguish a product identified in a report... consumer product; or understand the relationship between the submitter of a report of harm and the victim...

  13. Production Leveling (Heijunka) Implementation in a Batch Production System: A Case Study

    OpenAIRE

    Araujo , Luciano Fonseca; Queiroz , Abelardo Alves

    2009-01-01

    International audience; This paper presents a case study of an implementation of a new method for Production Leveling designed for batch production. It includes prioritizing criteria of products and level production plan. Moreover, it was applied on a subsidiary of a multinational enterprise located on Brazil, which manufacturing processes comprise batch production in a make-to-stock policy. Regarding a qualitative assessment, evidences show that the company had deficient practices related to...

  14. Development and Implementation of Location Based Native Mobile Application

    OpenAIRE

    Čović, Zlatko; Babić, Dejan

    2014-01-01

    This paper presents the development and implementation of a location based native mobile application for smart phones with the Android operating system. It can be used in promotion of some product or brand in the way of mobile games. The application has the administration interface (back-end) for data manipulation of users, administrators, clients and items. The system distinguishes between three levels of users: the main administrator, administrators-customers and users. The paper also descr...

  15. Location capability of a sparse regional network (RSTN) using a multi-phase earthquake location algorithm (REGLOC)

    Energy Technology Data Exchange (ETDEWEB)

    Hutchings, L.

    1994-01-01

    The Regional Seismic Test Network (RSTN) was deployed by the US Department of Energy (DOE) to determine whether data recorded by a regional network could be used to detect and accurately locate seismic events that might be clandestine nuclear tests. The purpose of this paper is to evaluate the location capability of the RSTN. A major part of this project was the development of the location algorithm REGLOC and application of Basian a prior statistics for determining the accuracy of the location estimates. REGLOC utilizes all identifiable phases, including backazimuth, in the location. Ninty-four events, distributed throughout the network area, detected by both the RSTN and located by local networks were used in the study. The location capability of the RSTN was evaluated by estimating the location accuracy, error ellipse accuracy, and the percentage of events that could be located, as a function of magnitude. The location accuracy was verified by comparing the RSTN results for the 94 events with published locations based on data from the local networks. The error ellipse accuracy was evaluated by determining whether the error ellipse includes the actual location. The percentage of events located was assessed by combining detection capability with location capability to determine the percentage of events that could be located within the study area. Events were located with both an average crustal model for the entire region, and with regional velocity models along with station corrections obtained from master events. Most events with a magnitude <3.0 can only be located with arrivals from one station. Their average location errors are 453 and 414 km for the average- and regional-velocity model locations, respectively. Single station locations are very unreliable because they depend on accurate backazimuth estimates, and backazimuth proved to be a very unreliable computation.

  16. The geometry description markup language

    International Nuclear Information System (INIS)

    Chytracek, R.

    2001-01-01

    Currently, a lot of effort is being put on designing complex detectors. A number of simulation and reconstruction frameworks and applications have been developed with the aim to make this job easier. A very important role in this activity is played by the geometry description of the detector apparatus layout and its working environment. However, no real common approach to represent geometry data is available and such data can be found in various forms starting from custom semi-structured text files, source code (C/C++/FORTRAN), to XML and database solutions. The XML (Extensible Markup Language) has proven to provide an interesting approach for describing detector geometries, with several different but incompatible XML-based solutions existing. Therefore, interoperability and geometry data exchange among different frameworks is not possible at present. The author introduces a markup language for geometry descriptions. Its aim is to define a common approach for sharing and exchanging of geometry description data. Its requirements and design have been driven by experience and user feedback from existing projects which have their geometry description in XML

  17. Semantic foundation for preferential description logics

    CSIR Research Space (South Africa)

    Britz, K

    2011-12-01

    Full Text Available Description logics are a well-established family of knowledge representation formalisms in Artificial Intelligence. Enriching description logics with non-monotonic reasoning capabilities, especially preferential reasoning as developed by Lehmann...

  18. Constraints due to the production of radioactive ion beams in the SPIRAL project

    International Nuclear Information System (INIS)

    Leroy, R.; Huguet, Y.; Jardin, P.; Marry, C.; Pacquet, J.Y.; Villari, A.C.C.

    1997-01-01

    The radioactive ion beams that will be delivered by the SPIRAL facility will be produced by the interaction of a stable high energy and high intensity primary ion beam delivered by the GANIL cyclotrons with a carbon target heated to 2000 deg C. During this interaction, some radioactive atoms will be created and will diffuse out of the target before entering into an electron cyclotron resonance ion source where they will be ionized and extracted. The production of radioactive ion beams with this method implies high radiation fields that activate and can damage materials located in the neighborhood of the target. Therefore, the production system which is composed of the permanent magnet ECR ion source coupled to a graphite target will be changed after two weeks of irradiation. As this ensemble will be very radioactive, this operation has to be supervised by remote control. The radiation levels around the target-ion source system and a detailed description of the different precautions that have been taken for safety and for prevention of contamination and irradiation are presented. (author)

  19. Rapid descriptive sensory methods – Comparison of Free Multiple Sorting, Partial Napping, Napping, Flash Profiling and conventional profiling

    DEFF Research Database (Denmark)

    Dehlholm, Christian; Brockhoff, Per B.; Meinert, Lene

    2012-01-01

    is a modal restriction of Napping to specific sensory modalities, directing sensation and still allowing a holistic approach to products. The new methods are compared to Flash Profiling, Napping and conventional descriptive sensory profiling. Evaluations are performed by several panels of expert assessors......Two new rapid descriptive sensory evaluation methods are introduced to the field of food sensory evaluation. The first method, free multiple sorting, allows subjects to perform ad libitum free sortings, until they feel that no more relevant dissimilarities among products remain. The second method...... are applied for the graphical validation and comparisons. This allows similar comparisons and is applicable to single-block evaluation designs such as Napping. The partial Napping allows repetitions on multiple sensory modalities, e.g. appearance, taste and mouthfeel, and shows the average...

  20. Demographics and remote locations

    Energy Technology Data Exchange (ETDEWEB)

    Coppus, G. [Dynawise Inc., Calgary, AB (Canada)

    2005-07-01

    Within the next decade, the number of people leaving the workforce will exceed the number of new entrants. The demand for workers is expected to increase in Alberta due to oil sands industry growth. Sixty-four per cent of all responding federal, provincial, and municipal government organizations have reported shortages in their work environments, and almost 8 in 10 organizations predict they will continue to be understaffed in the next 3 to 5 years. Tightness in the general labour market will have an impact on employers in remote locations, and planning is essential to avoid the creation of a mercenary culture and a reliance on compensation. Challenges found in remote locations include high turnover rates among recent hires; critical gaps in service length; aggressive retirement; and the fact that the local population is often seen as unqualified for many industrial jobs. This Power Point presentation suggested that although decisions to join or quit a company are often based on considerations such as the organizational environment and amount of compensation, the relationship between employees and management is the most important attribute in many career decisions. Rigorous quantitative analysis of current demographics combined with forecasting analysis may help to forestall recruitment difficulties for many companies. Productivity analyses, and the effects of work overload on absenteeism, attrition and quality of workmanship must also be examined. Many companies are now focusing on retention and development strategies on mid-career staff to address depletion, as well as redesigning procedures to operate with less skilled staff. It was concluded that extra efforts are now being made to attract non-traditional employees, and non-traditional employment models are being considered by some companies. refs., tabs., figs.

  1. In vitro production of anthocyanins - A literature review

    International Nuclear Information System (INIS)

    Gomez Zeledon, Javier; Jimenez, Victor M

    2011-01-01

    The production of secondary metabolites in plant cell cultures may be of interest for obtaining compounds that are difficult to synthesize or isolate from other sources, which is usually associated with high economic value of the substances, but may also be useful to help elucidating the metabolic pathways involved in the synthesis of such compounds. This paper presents a general description of anthocyanins, a group of pigments of great importance to the industry, complemented by referring the scientific papers that have been recently published on their in vitro production. Regarding the latter, a description of the effect of changes in growing conditions, of the addition of precursors, of the use of growth regulators, and of the utilization of elicitors and stressors on the production of these compounds, is done. Finally, this review mentions the use of hairy roots obtained by the use of agrobacterium rhizogenes for the production of these compounds.

  2. Breached fuel location in FFTF by delayed neutron monitor triangulation

    International Nuclear Information System (INIS)

    Bunch, W.L.; Tang, E.L.

    1985-10-01

    The Fast Flux Test Facility (FFTF) features a three-loop, sodium-cooled 400 MWt mixed oxide fueled reactor designed for the irradiation testing of fuels and materials for use in liquid metal cooled fast reactors. To establish the ultimate capability of a particular fuel design and thereby generate information that will lead to improvements, many of the fuel irradiations are continued until a loss of cladding integrity (failure) occurs. When the cladding fails, fission gas escapes from the fuel pin and enters the reactor cover gas system. If the cladding failure permits the primary sodium to come in contact with the fuel, recoil fission products can enter the sodium. The presence of recoil fission products in the sodium can be detected by monitoring for the presence of delayed neutrons in the coolant. It is the present philosophy to not operate FFTF when a failure has occurred that permits fission fragments to enter the sodium. Thus, it is important that the identity and location of the fuel assembly that contains the failed cladding be established in order that it might be removed from the core. This report discusses method of location of fuel element when cladding is breached

  3. Dual descriptions of supersymmetry breaking

    International Nuclear Information System (INIS)

    Intrilligator, K.; Thomas, S.

    1996-08-01

    Dynamical supersymmetry breaking is considered in models which admit descriptions in terms of electric, confined, or magnetic degrees of freedom in various limits. In this way, a variety of seemingly different theories which break supersymmetry are actually interrelated by confinement or duality. Specific examples are given in which there are two dual descriptions of the supersymmetry breaking ground state

  4. Design and implementation of an XML based object-oriented detector description database for CMS

    International Nuclear Information System (INIS)

    Liendl, M.

    2003-04-01

    This thesis deals with the development of a detector description database (DDD) for the compact muon solenoid (CMS) experiment at the large hadron collider (LHC) located at the European organization for nuclear research (CERN). DDD is a fundamental part of the CMS offline software with its main applications, simulation and reconstruction. Both are in need of different models of the detector in order to efficiently solve their specific tasks. In the thesis the requirements to a detector description database are analyzed and the chosen solution is described in detail. It comprises the following components: an XML based detector description language, a runtime system that implements an object-oriented transient representation of the detector, and an application programming interface to be used by client applications. One of the main aspects of the development is the design of the DDD components. The starting point is a domain model capturing concisely the characteristics of the problem domain. The domain model is transformed into several implementation models according to the guidelines of the model driven architecture (MDA). Implementation models and appropriate refinements thereof are foundation for adequate implementations. Using the MDA approach, a fully functional prototype was realized in C++ and XML. The prototype was successfully tested through seamless integration into both the simulation and the reconstruction framework of CMS. (author)

  5. Development and production of Zenith fissile elements

    Energy Technology Data Exchange (ETDEWEB)

    George, D; Wheatley, C C.H.; Lloyd, H

    1959-06-15

    The development of a new glass-bonded alumina-uranium oxide composition forming the fissile component of the Zenith fuel elements is described, together with the production of the initial charge containing 15 Kg. of U{sub 235]; the composition is capable of retaining fission product gases at high temperatures. The description includes criticality considerations, details of manufacture, and production statistics of the 11,000 discs produced.

  6. Combining FIA plot data with topographic variables: Are precise locations needed?

    Science.gov (United States)

    Stephen P. Prisley; Huei-Jin Wang; Philip J Radtke; John Coulston

    2009-01-01

    Plot data from the USFS FIA program could be combined with terrain variables to attempt to explain how terrain characteristics influence forest growth, species composition, productivity, fire behavior, wildlife habitat, and other phenomena. While some types of analyses using FIA data have been shown to be insensitive to precision of plot locations, it has been...

  7. U-10Mo Baseline Fuel Fabrication Process Description

    Energy Technology Data Exchange (ETDEWEB)

    Hubbard, Lance R. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Arendt, Christina L. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Dye, Daniel F. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Clayton, Christopher K. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Lerchen, Megan E. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Lombardo, Nicholas J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Lavender, Curt A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Zacher, Alan H. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2017-09-27

    This document provides a description of the U.S. High Power Research Reactor (USHPRR) low-enriched uranium (LEU) fuel fabrication process. This document is intended to be used in conjunction with the baseline process flow diagram (PFD) presented in Appendix A. The baseline PFD is used to document the fabrication process, communicate gaps in technology or manufacturing capabilities, convey alternatives under consideration, and as the basis for a dynamic simulation model of the fabrication process. The simulation model allows for the assessment of production rates, costs, and manufacturing requirements (manpower, fabrication space, numbers and types of equipment, etc.) throughout the lifecycle of the USHPRR program. This document, along with the accompanying PFD, is updated regularly

  8. A visual description of 2-component spinor calculus

    International Nuclear Information System (INIS)

    Hellsten, H.

    1975-07-01

    Spinors and algebraic operations on them are given a visual description. This structural interpretation of spinors is to be contrasted with the well known quadratic relation between spinors and visual objects (vectors,flagpoles). The interpretation in the present paper is founded on the observation that the product between two successive rotations half a turn along the legs of an angle will be a rotation through twice that angle. This observation makes it possible to explain visually the doubling of angles, which occurs when vectors are constructed out of spinors. It is seen that, using this explanation, spinor calculus can, in close analogy to 3-dimensional Euclidean vector calculus, be given a purely visual meaning. (Auth.)

  9. Description, prescription and the choice of discount rates

    International Nuclear Information System (INIS)

    Baum, Seth D.

    2009-01-01

    The choice of discount rates is a key issue in the analysis of long-term societal issues, in particular environmental issues such as climate change. Approaches to choosing discount rates are generally placed into two categories: the descriptive approach and the prescriptive approach. The descriptive approach is often justified on grounds that it uses a description of how society discounts instead of having analysts impose their own discounting views on society. This paper analyzes the common forms of the descriptive and prescriptive approaches and finds that, in contrast with customary thinking, both forms are equally descriptive and prescriptive. The prescriptions concern who has standing (i.e. who is included) in society, how the views of these individuals are measured, and how the measurements are aggregated. Such prescriptions are necessary to choose from among the many possible descriptions of how society discounts. The descriptions are the measurements made given a choice of measurement technique. Thus, the labels 'descriptive approach' and 'prescriptive approach' are deeply misleading, as analysts cannot avoid imposing their own views on society. (author)

  10. Clinical and histopathologic features of dorsally located furunculosis in dogs following water immersion or exposure to grooming products: 22 cases (2005-2013).

    Science.gov (United States)

    Cain, Christine L; Mauldin, Elizabeth A

    2015-03-01

    To describe clinical and histopathologic features of furunculosis in dogs following water immersion or exposure to grooming products. Retrospective case series. 22 dogs with skin lesions consistent with furunculosis and a history of water immersion or grooming prior to onset. Procedures-Information collected from the medical records of affected dogs included signalment, clinical signs, bathing or grooming procedure, diagnostic tests, treatment, and outcome. German Shepherd Dogs (4/22 [18%]) and Labrador Retrievers (4/22 [18%]) were most commonly affected. Skin lesions, particularly hemorrhagic pustules and crusts, were dorsally located in all dogs and occurred a median of 2 days (range, 1 to 7 days) following water immersion or exposure to grooming products. Twenty (91%) dogs were bathed at home or at a commercial grooming facility prior to lesion onset; 1 dog developed skin lesions following hydrotherapy on an underwater treadmill, and 1 dog developed peri-incisional skin lesions after surgery. Lethargy, signs of neck or back pain, and fever were common clinical signs. Pseudomonas aeruginosa was the most common bacterial isolate from dogs with bacteriologic culture performed on skin samples (10/14). The main histologic feature was acute follicular rupture in the superficial dermis with suppurative inflammation and dermal hemorrhage. Systemic antimicrobial treatment, particularly oral administration of fluoroquinolones, resulted in excellent clinical response in 16 of 22 (73%) dogs. Acute-onset furunculosis with characteristic clinical and histopathologic features in dogs following water immersion or exposure to grooming products was described. Knowledge of the historical and clinical features of this syndrome is essential for accurate diagnosis and appropriate treatment of affected dogs.

  11. Converting Taxonomic Descriptions to New Digital Formats

    Directory of Open Access Journals (Sweden)

    Hong Cui

    2008-01-01

    Full Text Available Abstract.--The majority of taxonomic descriptions is currently in print format. The majority of digital descriptions are in formats such as DOC, HTML, or PDF and for human readers. These formats do not convey rich semantics in taxonomic descriptions for computer-aided process. Newer digital formats such as XML and RDF accommodate semantic annotations that allow computers to process the rich semantics on human's behalf, thus open up opportunities for a wide range of innovative usages of taxonomic descriptions, such as searching in more precise and flexible ways, integrating with gnomic and geographic information, generating taxonomic keys automatically, and text data mining and information visualization etc. This paper discusses the challenges in automated conversion of multiple collections of descriptions to XML format and reports an automated system, MARTT. MARTT is a machine-learning system that makes use of training examples to tag new descriptions into XML format. A number of utilities are implemented as solutions to the challenges. The utilities are used to reduce the effort for training example preparation, to facilitate the creation of a comprehensive schema, and to predict system performance on a new collection of descriptions. The system has been tested with several plant and alga taxonomic publications including Flora of China and Flora of North America.

  12. The Correlation Between Students’ Vocabulary Mastery and Their Interest in English Toward Reading Comprehension in Descriptive Text

    Directory of Open Access Journals (Sweden)

    Eva Faliyanti

    2015-10-01

    Full Text Available Abstract :Vocabulary is one aspects  in reading comprehension. By having  a lot vocabulary, the students understand in reading comprehension. The interest in English also gives effect of students mastery in English. Before the students start to read they are must be interested in English first. Reading is one of skills in English that very essential for the students, because by reading the students can get information from the text. In this research the researcher focoses on reading comprehension in descriptive text. The problems formulation in this research are;(1 How far is the students score of ability in vocabulary mastery toward reading comprehension in descriptive text? (2 How far is the students score of ability in students interest in English toward reading comprehension in descriptive text? (3 How far is the correlation between students’ score of vocabulary mastery and students interest in English toward reading comprehension in descriptive text?. The objective of the research are; (1 To identify the students’ score in vocabulary mastery toward reading comprehension in descriptive text. (2 To identify the students’ score in students interest in English toward reading comprehension in descriptive text. (3 To find out how far the correlation between students’ score of vocabulary mastery and students interest in English toward reading compregension in descritive text.Theresearch was conducted at the second semester of Muhammadiyah University Students in Academic Year 2014/2015. The population of this research was 127 students. The researcher used cluster ramdom sampling in taking sample. In collecting the data the researcher used test and questionnarie, namely vocabulary mastery and reading comprehension in descriptive text. In questionnarie used to students interest in English and in analyzing the data, the researcher used Product Moment Formula.After analyzing the data by using the correlation product moment and Regression

  13. Costly location in Hotelling duopoly

    NARCIS (Netherlands)

    Hinloopen, J.; Martin, S.

    We introduce a cost of location into Hotelling's (1929) spatial duopoly model. We derive the general conditions on the cost-of-location function under which a pure strategy price-location Nash equilibrium exists. With linear transportation cost and a suitably specified cost of location that rises

  14. Costly location in Hotelling duopoly

    NARCIS (Netherlands)

    Hinloopen, J.; Martin, S.

    2013-01-01

    We introduce a cost of location into Hotelling’s (1929) spatial duopoly. We derive the general conditions on the cost-of-location function under which a pure strategy price-location Nash equilibrium exists. With linear transportation cost and a suitably specified cost of location that rises toward

  15. WRAP Module 1 data management system (DMS) software design description (SDD)

    Energy Technology Data Exchange (ETDEWEB)

    Talmage, P.A.

    1995-03-17

    The Waste Receiving and Processing (WRAP) Module 1 Data Management System (DMS) System Design Description (SDD) describes the logical and physical architecture of the system. The WRAP 1 DMS SDD formally partitions the elements of the system described in the WRAP 1 DMS Software requirements specification into design objects and describes the key properties and relationships among the design objects and interfaces with external systems such as the WRAP Plant Control System (PCS). The WRAP 1 DMS SDD can be thought of as a detailed blueprint for implementation activities. The design descriptions contained within this document will describe, in detail, the software products that will be developed to assist the Project W-026, Waste Receiving and Processing Module 1, in their management functions. The WRAP 1 DMS is required to collect, store, and report data related to certification, tracking, packaging, repackaging, processing, and shipment of waste processed or stored at the WRAP 1 facility.

  16. WRAP Module 1 data management system (DMS) software design description (SDD)

    International Nuclear Information System (INIS)

    Talmage, P.A.

    1995-01-01

    The Waste Receiving and Processing (WRAP) Module 1 Data Management System (DMS) System Design Description (SDD) describes the logical and physical architecture of the system. The WRAP 1 DMS SDD formally partitions the elements of the system described in the WRAP 1 DMS Software requirements specification into design objects and describes the key properties and relationships among the design objects and interfaces with external systems such as the WRAP Plant Control System (PCS). The WRAP 1 DMS SDD can be thought of as a detailed blueprint for implementation activities. The design descriptions contained within this document will describe, in detail, the software products that will be developed to assist the Project W-026, Waste Receiving and Processing Module 1, in their management functions. The WRAP 1 DMS is required to collect, store, and report data related to certification, tracking, packaging, repackaging, processing, and shipment of waste processed or stored at the WRAP 1 facility

  17. Summary description of the Babcock and Wilcox integrated nuclear design system

    International Nuclear Information System (INIS)

    Wittkopf, W.A.

    1976-03-01

    The Babcock and Wilcox integrated nuclear design system is divided into three broad areas: basic nuclear data processing, applications data processing, and nuclear design calculations. In basic nuclear data processing, basic nuclear data are collected, evaluated, and processed into a specified fine-energy mesh multigroup data file called a Master Library. In applications data processing, data for selected materials are retrieved from the Master Library and processed into an optimally structured, multigroup Production Library. Using these data and input descriptions of cells or regions, neutron spectra are generated and few-group constants are computed and fitted as a function of fuel burnup, initial enrichment, temperature, etc. In nuclear design calculations, few-group cross-section fits and descriptions of each core region and core geometry are input to a diffusion-depletion program or a nodal program that computes core reactivity, core power distribution, control rod worth, fuel cycle studies, core operating limitations, etc

  18. Multi criteria decision making methods for location selection of distribution centers

    Directory of Open Access Journals (Sweden)

    Romita Chakraborty

    2013-10-01

    Full Text Available In recent years, major challenges such as, increase in inflexible consumer demands and to improve the competitive advantage, it has become necessary for various industrial organizations all over the world to focus on strategies that will help them achieve cost reduction, continual quality improvement, increased customer satisfaction and on time delivery performance. As a result, selection of the most suitable and optimal facility location for a new organization or expansion of an existing location is one of the most important strategic issues, required to fulfill all of these above mentioned objectives. In order to sustain in the global competitive market of 21st century, many industrial organizations have begun to concentrate on the proper selection of the plant site or best facility location. The best location is that which results in higher economic benefits through increased productivity and good distribution network. When a choice is to be made from among several alternative facility locations, it is necessary to compare their performance characteristics in a decisive way. As the facility location selection problem involves multiple conflicting criteria and a finite set of potential candidate alternatives, different multi-criteria decision-making (MCDM methods can be effectively applied to solve such type of problem. In this paper, four well known MCDM methods have been applied on a facility location selection problem and their relative ranking performances are compared. Because of disagreement in the ranks obtained by the four different MCDM methods a final ranking method based on REGIME has been proposed by the authors to facilitate the decision making process.

  19. CRAC2 model description

    International Nuclear Information System (INIS)

    Ritchie, L.T.; Alpert, D.J.; Burke, R.P.; Johnson, J.D.; Ostmeyer, R.M.; Aldrich, D.C.; Blond, R.M.

    1984-03-01

    The CRAC2 computer code is a revised version of CRAC (Calculation of Reactor Accident Consequences) which was developed for the Reactor Safety Study. This document provides an overview of the CRAC2 code and a description of each of the models used. Significant improvements incorporated into CRAC2 include an improved weather sequence sampling technique, a new evacuation model, and new output capabilities. In addition, refinements have been made to the atmospheric transport and deposition model. Details of the modeling differences between CRAC2 and CRAC are emphasized in the model descriptions

  20. Olkiluoto site description 2011

    International Nuclear Information System (INIS)

    2012-12-01

    This fourth version of the Olkiluoto Site Report, produced by the OMTF (Olkiluoto Modelling Task Force), updates the Olkiluoto Site Report 2008 with the data and knowledge obtained up to December 2010. A descriptive model of the site (the Site Descriptive Model, SDM), i.e. a model describing the geological and hydrogeological structure of the site, properties of the bedrock and the groundwater and its flow, and the associated interacting processes and mechanisms. The SDM is divided into six parts: surface system, geology, rock mechanics, hydrogeology, hydrogeochemistry and transport properties