78 FR 69885 - NASA Advisory Council; Aeronautics Committee; Meeting

Science.gov (United States)

2013-11-21

... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [Notice: 13-133] NASA Advisory Council; Aeronautics... Aeronautics and Space Administration announces a meeting of the Aeronautics Committee of the NASA Advisory... INFORMATION CONTACT: Ms. Susan L. Minor, Executive Secretary for the Aeronautics Committee, NASA Headquarters...

Ensuring US National Aeronautics Test Capabilities

Science.gov (United States)

Marshall, Timothy J.

2010-01-01

U.S. leadership in aeronautics depends on ready access to technologically advanced, efficient, and affordable aeronautics test capabilities. These systems include major wind tunnels and propulsion test facilities and flight test capabilities. The federal government owns the majority of the major aeronautics test capabilities in the United States, primarily through the National Aeronautics and Space Administration (NASA) and the Department of Defense (DoD). However, changes in the Aerospace landscape, primarily the decrease in demand for testing over the last 20 years required an overarching strategy for management of these national assets. Therefore, NASA established the Aeronautics Test Program (ATP) as a two-pronged strategic initiative to: (1) retain and invest in NASA aeronautics test capabilities considered strategically important to the agency and the nation, and (2) establish a strong, high level partnership with the DoD. Test facility utilization is a critical factor for ATP because it relies on user occupancy fees to recover a substantial part of the operations costs for its facilities. Decreasing utilization is an indicator of excess capacity and in some cases low-risk redundancy (i.e., several facilities with basically the same capability and overall low utilization). However, low utilization does not necessarily translate to lack of strategic importance. Some facilities with relatively low utilization are nonetheless vitally important because of the unique nature of the capability and the foreseeable aeronautics testing needs. Unfortunately, since its inception, the customer base for ATP has continued to shrink. Utilization of ATP wind tunnels has declined by more than 50% from the FY 2006 levels. This significant decrease in customer usage is attributable to several factors, including the overall decline in new programs and projects in the aerospace sector; the impact of computational fluid dynamics (CFD) on the design, development, and research

76 FR 16643 - NASA Advisory Council; Aeronautics Committee; Meeting

Science.gov (United States)

2011-03-24

... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [Notice (11-024)] NASA Advisory Council; Aeronautics... Aeronautics and Space Administration announces a meeting of the Aeronautics Committee of the NASA Advisory.... ADDRESSES: Thursday, April 14, 2011--NASA Dryden Flight Research Center (DFRC), Lilly Drive Building 4825...

76 FR 58843 - NASA Advisory Council; Aeronautics Committee; Meeting

Science.gov (United States)

2011-09-22

... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [Notice 11-082] NASA Advisory Council; Aeronautics... Aeronautics and Space Administration announces a meeting of the Aeronautics Committee of the NASA Advisory... Headquarters, Washington, DC 20546, (202) 358-0566, or [email protected]nasa.gov . SUPPLEMENTARY INFORMATION: The...

75 FR 41240 - NASA Advisory Council; Aeronautics Committee; Meeting

Science.gov (United States)

2010-07-15

... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [Notice (10-079)] NASA Advisory Council; Aeronautics... Aeronautics and Space Administration announces a meeting of the Aeronautics Committee of the NASA Advisory....m. to 4 p.m. (local time). ADDRESSES: NASA Glenn Research Center, Building 15, Small Dining...

75 FR 17166 - NASA Advisory Council; Aeronautics Committee; Meeting

Science.gov (United States)

2010-04-05

... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [Notice (10-038)] NASA Advisory Council; Aeronautics... Aeronautics and Space Administration announces a meeting of the Aeronautics Committee of the NASA Advisory... a.m. to 1 p.m.; Eastern Daylight Time. ADDRESSES: NASA Langley Research Center, Building 1219, Room...

78 FR 10640 - NASA Advisory Council; Aeronautics Committee; Meeting

Science.gov (United States)

2013-02-14

... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [Notice (13-010)] NASA Advisory Council; Aeronautics... Aeronautics and Space Administration announces a meeting of the Aeronautics Committee of the NASA Advisory..., or [email protected]nasa.gov . SUPPLEMENTARY INFORMATION: The meeting will be open to the public up to...

78 FR 41114 - NASA Advisory Council; Aeronautics Committee; Meeting

Science.gov (United States)

2013-07-09

... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [Notice 13-075] NASA Advisory Council; Aeronautics... Aeronautics and Space Administration announces a meeting of the Aeronautics Committee of the NASA Advisory... planning. DATES: Tuesday, July 30, 2013, 9:00 a.m. to 5:00 p.m.; Local Time. ADDRESSES: NASA Headquarters...

77 FR 38091 - NASA Advisory Council; Aeronautics Committee; Meeting.

Science.gov (United States)

2012-06-26

... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [Notice: 12-047] NASA Advisory Council; Aeronautics... National Aeronautics and Space Administration announces a meeting of the Aeronautics Committee of the NASA..., July 24, 2012, 8 a.m. to 3 p.m. local time. ADDRESSES: NASA Goddard Space Flight Center (GSFC...

75 FR 50782 - NASA Advisory Council; Aeronautics Committee; Meeting

Science.gov (United States)

2010-08-17

... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [Notice (10-087)] NASA Advisory Council; Aeronautics... Aeronautics and Space Administration announces a meeting of the Aeronautics Committee of the NASA Advisory..., 2010, 8 a.m. to 12:30 p.m.; Local Time. ADDRESSES: NASA Ames Conference Center, Building 3, 500...

IMPLEMENTATION OF AERONAUTICAL LOCAL SATELLITE AUGMENTATION SYSTEM

Directory of Open Access Journals (Sweden)

Stojce Ilcev

2011-03-01

Full Text Available Abstract. This paper introduces development and implementation of new Local Satellite AugmentationSystem as an integration component of the Regional Satellite Augmentation System (RSAS employingcurrent and new Satellite Communications, Navigation and Surveillance (CNS for improvement of the AirTraffic Control (ATC and Air Traffic Management (ATM and for enhancement safety systems includingtransport security and control of flights in all stages, airport approaching, landing, departures and allmovements over airport surface areas. The current first generation of the Global Navigation Satellite SystemGNSS-1 applications are represented by fundamental military solutions for Position, Velocity and Time ofthe satellite navigation and determination systems such as the US GPS and Russian GLONASS (Former-USSR requirements, respectively. The establishment of Aeronautical CNS is also discussed as a part ofGlobal Satellite Augmentation Systems of GPS and GLONASS systems integrated with existing and futureRSAS and LSAS in airports areas. Specific influence and factors related to the Comparison of the Currentand New Aeronautical CNS System including the Integration of RSAS and GNSS solutions are discussedand packet of facts is determined to maximize the new satellite Automatic Dependent Surveillance System(ADSS and Special Effects of the RSAS Networks. The possible future integration of RSAS and GNSS andthe common proposal of the satellite Surface Movement Guidance and Control are presented in thechangeless ways as of importance for future enfacements of ATC and ATM for any hypothetical airportinfrastructure.Keywords: ADSS, ATC, ATM, CNS, GSAS, LRAS, RSAS, SMGC, Special Effects of RSAS.

Take Off! Aeronautics and Aviation Science: Careers and Opportunities

Science.gov (United States)

1998-01-01

Funded by National Aeronautic and Space Administration's High Performance Computing and Communications/ Learning Technologies Project (HPCC/LTP) Cooperative Agreement, Aeronautics and aviation Science: Careers and Opportunities was operative from July 1995 through July 1998. This project operated as a collaboration with Massachusetts Corporation for Educational Telecommunications, the Federal Aviation Administration, Bridgewater State College and four targeted "core sites" in the greater Boston area: Dorchester, Malden, East Boston and Randolph. In its first and second years, a video series with a participatory website on aeronautics and aviation science was developed and broadcast via "live, interactive" satellite feed. Accompanying teacher and student supplementary instructional materials for grades 6-12 were produced and disseminated by the Massachusetts Corporation for Educational Telecommunications (MCET). In year three, the project team redesigned the website, edited 14 videos to a five part thematic unit, and developed a teacher's guide to the video and web materials supplement for MAC and PC platforms, aligned with national standards. In the MCET grant application it states that project Take Off! in its initial phase would recruit and train teachers at "core" sites in the greater Boston area, as well as opening participation to other on-line users of MCET's satellite feeds. "Core site" classrooms would become equipped so that teachers and students might become engaged in an interactive format which aimed at not only involving the students during the "live" broadcast of the instructional video series, but which would encourage participation in electronic information gathering and sharing among participants. As a Take Off! project goal, four schools with a higher than average proportion of minority and underrepresented youth were invited to become involved with the project to give these students the opportunity to consider career exploration and development

Leading Edge Aeronautics Research for NASA Project

Data.gov (United States)

National Aeronautics and Space Administration — The LEARN Project explores the creation of novel concepts and processes with the potential to create new capabilities in aeronautics research through awards to the...

Application of Mobile-ip to Space and Aeronautical Networks

Science.gov (United States)

Leung, Kent; Shell, Dan; Ivancic, William D.; Stewart, David H.; Bell, Terry L.; Kachmar, Brian A.

2001-01-01

The National Aeronautics and Space Administration (NASA) is interested in applying mobile Internet protocol (mobile-ip) technologies to its space and aeronautics programs. In particular, mobile-ip will play a major role in the Advanced Aeronautic Transportation Technology (AAT-F), the Weather Information Communication (WINCOMM), and the Small Aircraft Transportation System (SATS) aeronautics programs. This paper describes mobile-ip and mobile routers--in particular, the features, capabilities, and initial performance of the mobile router are presented. The application of mobile-router technology to NASA's space and aeronautics programs is also discussed.

LBA-ECO LC-03 Hypsography, Rivers, Roads, and DEM, Four Areas across Brazilian Amazon

Data.gov (United States)

National Aeronautics and Space Administration — This data set provides four related spatial data products for four study areas across the Brazilian Amazon: Manaus, Amazonas; Tapajos National Forest, Para Western...

Astronautics and Aeronautics, 1986-1990: A Chronology

Science.gov (United States)

Gawdiak, Ihor Y.; Miro, Ramon J.; Stueland, Sam

1997-01-01

This chronology of events in aeronautics, aviation, space science, and space exploration was prepared by the Federal Research Division of the LibrarY of Congress for the History Division of the National Aeronautics and Space Administration (NASA). It covers the years 1996-1990 and continues the series of annual chronologies published by NASA. The present volume returns to the format used in the Astronautics and Aeronautics, 1979-1984: A Chronology volume. It also integrates in a single table the information presented in two or three previous publications.

Astronautics and Aeronautics, 1991-1995: A Chronology

Science.gov (United States)

Gawdiak, Ihor Y. (Compiler); Shetland, Charles (Compiler)

2000-01-01

This chronology of events in aeronautics, aviation, space science, and space exploration was prepared by the Federal Research Division of the Library of Congress and RSIS for the History Division of the National Aeronautics and Space Administration (NASA). It covers the years 1991-1995 and continues the series of annual chronologies published by NASA. The present volume uses the format of the previous edition of this series, Astronautics and Aeronautics, 1986-1990: A Chronology. It also integrates, in the appendices, information presented in previous publication

Dryden Aeronautical Test Range

Data.gov (United States)

Federal Laboratory Consortium — Recently redesignated to honor Dr. Hugh L. Dryden, NASA's Dryden Aeronautical Test Range (DATR) supports aerospace flight research and technology integration, space...

Aeronautical Information System Replacement -

Data.gov (United States)

Department of Transportation — Aeronautical Information System Replacement is a web-enabled, automation means for the collection and distribution of Service B messages, weather information, flight...

Large-Area, Multi-Junction, Epitaxial Lift-Off Solar Cells with Backside Contacts, Phase II

Data.gov (United States)

National Aeronautics and Space Administration — In this Phase II program we propose to develop a manufacturable production process to introduce backside contacts to MicroLink Devices? large-area, multi-junction...

7 CFR 959.4 - Production area.

Science.gov (United States)

2010-01-01

... 7 Agriculture 8 2010-01-01 2010-01-01 false Production area. 959.4 Section 959.4 Agriculture... and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE ONIONS GROWN IN SOUTH TEXAS Order Regulating Handling Definitions § 959.4 Production area. Production area means the counties of Val Verde...

7 CFR 956.4 - Production area.

Science.gov (United States)

2010-01-01

... 7 Agriculture 8 2010-01-01 2010-01-01 false Production area. 956.4 Section 956.4 Agriculture... and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE SWEET ONIONS GROWN IN THE WALLA WALLA VALLEY OF SOUTHEAST WASHINGTON AND NORTHEAST OREGON Definitions § 956.4 Production area. Production area...

7 CFR 955.4 - Production area.

Science.gov (United States)

2010-01-01

... 7 Agriculture 8 2010-01-01 2010-01-01 false Production area. 955.4 Section 955.4 Agriculture... and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE VIDALIA ONIONS GROWN IN GEORGIA Definitions § 955.4 Production area. Production area means that part of the State of Georgia enclosed by the...

Wireless ad hoc networks access for aeronautical communications

OpenAIRE

Besse , Frédéric; Garcia , Fabien; Pirovano , Alain; Radzik , José

2010-01-01

International audience; There is an increasing interest in the current aeronautical context to offer new services for civil aircraft passengers. For example, airlines want to offer their customers the opportunity to access the Internet, to manage their mails, to watch video on demand, to access corporate VPNs.... All these services represent a new type of air-ground communications called APC (Aeronautical Passenger Communications) in the ATN (Aeronautical Telecommunication Network) context. I...

A Hybrid Satellite-Terrestrial Approach to Aeronautical Communication Networks

Science.gov (United States)

Kerczewski, Robert J.; Chomos, Gerald J.; Griner, James H.; Mainger, Steven W.; Martzaklis, Konstantinos S.; Kachmar, Brian A.

2000-01-01

Rapid growth in air travel has been projected to continue for the foreseeable future. To maintain a safe and efficient national and global aviation system, significant advances in communications systems supporting aviation are required. Satellites will increasingly play a critical role in the aeronautical communications network. At the same time, current ground-based communications links, primarily very high frequency (VHF), will continue to be employed due to cost advantages and legacy issues. Hence a hybrid satellite-terrestrial network, or group of networks, will emerge. The increased complexity of future aeronautical communications networks dictates that system-level modeling be employed to obtain an optimal system fulfilling a majority of user needs. The NASA Glenn Research Center is investigating the current and potential future state of aeronautical communications, and is developing a simulation and modeling program to research future communications architectures for national and global aeronautical needs. This paper describes the primary requirements, the current infrastructure, and emerging trends of aeronautical communications, including a growing role for satellite communications. The need for a hybrid communications system architecture approach including both satellite and ground-based communications links is explained. Future aeronautical communication network topologies and key issues in simulation and modeling of future aeronautical communications systems are described.

14 CFR 61.159 - Aeronautical experience: Airplane category rating.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 2 2010-01-01 2010-01-01 false Aeronautical experience: Airplane category... Transport Pilots § 61.159 Aeronautical experience: Airplane category rating. (a) Except as provided in... certificate with an airplane category and class rating must have at least 1,500 hours of total time as a pilot...

The Relationship of a Pilot's Educational Background, Aeronautical Experience and Recency of Experience to Performance In Initial Training at a Regional Airline

Science.gov (United States)

Shane, Nancy R.

The purpose of this study was to determine how a pilot's educational background, aeronautical experience and recency of experience relate to their performance during initial training at a regional airline. Results show that variables in pilots' educational background, aeronautical experience and recency of experience do predict performance in training. The most significant predictors include years since graduation from college, multi-engine time, total time and whether or not a pilot had military flying experience. Due to the pilot shortage, the pilots entering regional airline training classes since August 2013 have varied backgrounds, aeronautical experience and recency of experience. As explained by Edward Thorndike's law of exercise and the law of recency, pilots who are actively using their aeronautical knowledge and exercising their flying skills should exhibit strong performance in those areas and pilots who have not been actively using their aeronautical knowledge and exercising their flying skills should exhibit degraded performance in those areas. Through correlation, chi-square and multiple regression analysis, this study tests this theory as it relates to performance in initial training at a regional airline.

Multilingual Aeronautical Dictionary (Dictionnaire Aeronautique Multilingue)

Science.gov (United States)

1980-01-01

8217See ’aerofoil profile’ DE Bord’Boden-Funkverkehr (ili 20~ AGARD MULTILINGUAL AERONAUTICAL DICTIONARY 10318 air mileage indicator (AMI) ES comunicacion ...Autogenschweissen (nil ES sistema fml autom~tico de comunicacion NE automatische besturing ES soldadura MI autdgena aire-tierra P otooWatmtc FR soudage Wm autogene...AERONAUTICAL DICTIONARY DE Fernmeldesatellit [m) RU 1. maPXWbPOBK& ff1 OTcOKOB RU onPe~ene~me Wn Aesma84HN Komnaca ES satelite Wm do comunicaciones 2

Technical needs and research opportunities provided by projected aeronautical and space systems

Science.gov (United States)

Noor, Ahmed K.

1992-01-01

The overall goal of the present task is to identify the enabling and supporting technologies for projected aeronautical and space systems. A detailed examination was made of the technical needs in the structures, dynamics and materials areas required for the realization of these systems. Also, the level of integration required with other disciplines was identified. The aeronautical systems considered cover the broad spectrum of rotorcraft; subsonic, supersonic and hypersonic aircraft; extremely high-altitude aircraft; and transatmospheric vehicles. The space systems considered include space transportation systems; spacecrafts for near-earth observation; spacecrafts for planetary and solar exploration; and large space systems. A monograph is being compiled which summarizes the results of this study. The different chapters of the monograph are being written by leading experts from governmental laboratories, industry and universities.

Piezoelectric MEMS Microphones for Ground Testing of Aeronautical Systems, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — Improving the acoustical environment is critical in aeronautics. Airports and aeronautical systems manufacturers are facing ever-increasing demands to reduce noise...

Piezoelectric MEMS Microphones for Ground Testing of Aeronautical Systems, Phase II

Data.gov (United States)

National Aeronautics and Space Administration — Improving the acoustical environment is critical in aeronautics. Airports and aeronautical systems manufacturers are facing ever-increasing demands to reduce noise...

The Aeronautics Education, Research, and Industry Alliance (AERIAL) 2002 Report

Science.gov (United States)

Bowen, Brent D.; Fink, Mary M.; Nickerson, Jocelyn S.

2002-01-01

This report presents and overview of the Aeronautics Education, Research, and Industry Alliance (AERIAL). It covers the University of Nebraska's areas of research, and its outreach to students at Native American schools as part of AERIAL. The report contains three papers: "Airborne Remote Sensing (ARS) for Agricultural Research and Commercialization Application" (White Paper), "Validated Numerical Models for the Convective Extinction of Fuel Droplets (CEFD)", and "The Small Aircraft Transportation System (SATS): Research Collaborations with the NASA Langley Research Center".

An Overview of the NASA Aeronautics Test Program Strategic Plan

Science.gov (United States)

Marshall, Timothy J.

2010-01-01

U.S. leadership in aeronautics depends on ready access to technologically advanced, efficient, and affordable aeronautics test capabilities. These systems include major wind tunnels and propulsion test facilities and flight test capabilities. The federal government owns the majority of the major aeronautics test capabilities in the United States, primarily through the National Aeronautics and Space Administration (NASA) and the Department of Defense (DoD), however an overarching strategy for management of these national assets was needed. Therefore, in Fiscal Year (FY) 2006 NASA established the Aeronautics Test Program (ATP) as a two-pronged strategic initiative to: (1) retain and invest in NASA aeronautics test capabilities considered strategically important to the agency and the nation, and (2) establish a strong, high level partnership with the DoD Test Resources Management Center (TRMC), stewards of the DoD test and evaluation infrastructure. Since then, approximately seventy percent of the ATP budget has been directed to underpin fixed and variable costs of facility operations within its portfolio and the balance towards strategic investments in its test facilities, including maintenance and capability upgrades. Also, a strong guiding coalition was established through the National Partnership for Aeronautics Testing (NPAT), with governance by the senior leadership of NASA s Aeronautics Research Mission Directorate (ARMD) and the DoD's TRMC. As part of its strategic planning, ATP has performed or participated in many studies and analyses, including assessments of major NASA and DoD aeronautics test capabilities, test facility condition evaluations and market research. The ATP strategy has also benefitted from unpublished RAND research and analysis by Ant n et al. (2009). Together, these various studies, reports and assessments serve as a foundation for a new, five year strategic plan that will guide ATP through FY 2014. Our vision for the future is a balanced

Emerging Options and Opportunities in Civilian Aeronautics

Science.gov (United States)

Bushnell, Dennis M.

2012-01-01

This paper addresses the major problems/issues with civilian aeronautics going forward, the contextual ongoing technology revolutions, the several emerging civilian aeronautical "Big Ideas" and associated enabling technological approaches. The ongoing IT Revolution is increasingly providing, as 5 senses virtual presence/reality becomes available, along with Nano/Molecular Manufacturing, virtual alternatives to Physical transportation for both people and goods. Paper examines the potential options available to aeronautics to maintain and perhaps grow "market share" in the context of this evolving competition. Many of these concepts are not new, but the emerging technology landscape is enhancing their viability and marketability. The concepts vary from the "interesting" to the truly revolutionary and all require considerable research. Paper considers the speed range from personal/general aviation to supersonic transports and technologies from energetics to fabrication.

The dose-area product in DSA

International Nuclear Information System (INIS)

Gfirtner, H.

1995-01-01

In DSA, the dose-area product shows a very good correlation with the maximum incidence dose. It may therefore serve as a reliable basis for the assessment of radiation doses to patients. The dose-area product is also a useful tool for the detection pf peak shifts in the radiation curves for certain investigations. In view of the considerable scatter of the values for the dose-area product these must, however, be subjected to an additional statistical analysis. Provided that this rule is observed, the dose-area product will considerably gain in importance for the monitoring of radiation exposures of patients. A very noteworthy learning effect could be achieved, if it would be made mandatory for those statistical analyses to be carried out not only on an investigation-specific but also an investigator-specific basis. The latter is particularly true of teaching hospitals. (orig./VHE) [de

The thorium alloys in aeronautics: from material analysis to regulation application

International Nuclear Information System (INIS)

Laroche, P.; Cazoulat, A.; Gerasimo, P.

1999-01-01

The thorium handled in aeronautics is a mixing in variable proportion of different thorium isotopes and its daughter products, but the regulation considers only two alpha emitters (Th-232 and Th-228): the thorium being considered as a natural radioactive substance, the legislation and the activities authorised are less restrictive than for artificial elements, it is a paradoxical situation because the thorium has the annual limit of intake the lowest of the regulation. (N.C.)

Robust Control of Aeronautical Electrical Generators for Energy Management Applications

OpenAIRE

Giacomo Canciello; Alberto Cavallo; Beniamino Guida

2017-01-01

A new strategy for the control of aeronautical electrical generators via sliding manifold selection is proposed, with an associated innovative intelligent energy management strategy used for efficient power transfer between two sources providing energy to aeronautical loads, having different functionalities and priorities. Electric generators used for aeronautical application involve several machines, including a main generator and an exciter. Standard regulators (PI or PID-like) are normally...

SMART AERONAUTICAL CHART MANAGEMENT SYSTEM DESIGN

Directory of Open Access Journals (Sweden)

M. E. Pakdil

2015-10-01

Full Text Available Civil aviation is developing rapidly, and the number of domestic and international operations is increasing exponentially every year than the previous one. Airline companies with increased air traffic and the number of passengers increase the demand of new aircrafts. An aircraft needs not only fuel but also pilot and aeronautical information (charts, digital navigation information, flight plan, and etc. to perform flight operation. One of the most important components in aeronautical information is the terminal chart. Authorized institution in every state is responsible to publish their terminal charts for certain periods. Although these charts are produced in accordance with ICAO’s Annex 4 and Annex 15, cartographic representation and page layout differs in each state’s publication. This situation makes difficult to read them by pilots. In this paper, standard instrument departure (SID charts are analysed to produce by use of cutting-edge and competitive technologies instead of classical computer-aided drawing and vector based graphic applications that are currently used by main chart producers. The goal is to design efficient and commercial chart management system that is able to produce aeronautical charts with same cartographic representation for all states.

Aerobasics–An Introduction to Aeronautics

Indian Academy of Sciences (India)

Home; Journals; Resonance – Journal of Science Education; Volume 14; Issue 2. Aerobasics–An Introduction to Aeronautics - Airfoils and Wings in Subsonic Flow. S P Govinda Raju. Series Article Volume 14 Issue 2 February 2009 pp 191-203 ...

76 FR 183 - NASA Advisory Council; Aeronautics Committee; Meeting

Science.gov (United States)

2011-01-03

... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [Notice: (10-172)] NASA Advisory Council... the NASA Advisory Council. The meeting will be held for the purpose of soliciting from the aeronautics... 20546, (202) 358-0566, or [email protected]nasa.gov . SUPPLEMENTARY INFORMATION: The meeting will be open...

Aerobasics–An Introduction to Aeronautics

Indian Academy of Sciences (India)

Home; Journals; Resonance – Journal of Science Education; Volume 15; Issue 4. Aerobasics-An Introduction to Aeronautics - Air Navigation ... Keywords. Dead reckoning; celestial navigation; radio aids to navigation; instrument landing system (ILS); inertial navigation system (INS); global positioning system (GPS).

Astronautics and Aeronautics: A Chronology, 1996-2000

Science.gov (United States)

Lewis, Marieke; Swanson, Ryan

2009-01-01

This report is a chronological compilation of narrative summaries of news reports and government documents highlighting significant events and developments in United States and foreign aeronautics and astronautics. It covers the years 1996 through 2000. These summaries provide a day-by-day recounting of major activities, such as administrative developments, awards, launches, scientific discoveries, corporate and government research results, and other events in countries with aeronautics and astronautics programs. Researchers used the archives and files housed in the NASA History Division, as well as reports and databases on the NASA Web site.

Astronautics and Aeronautics: A Chronology, 2001-2005

Science.gov (United States)

Ivey, William Noel; Lewis, Marieke

2010-01-01

This report is a chronological compilation of narrative summaries of news reports and government documents highlighting significant events and developments in U.S. and foreign aeronautics and astronautics. It covers the years 2001 through 2005. These summaries provide a day-by-day recounting of major activities, such as administrative developments, awards, launches, scientific discoveries, corporate and government research results, and other events in countries with aeronautics and astronautics programs. Researchers used the archives and files housed in the NASA History Division, as well as reports and databases on the NASA Web site.

Aerobasics–An Introduction to Aeronautics

Indian Academy of Sciences (India)

Home; Journals; Resonance – Journal of Science Education; Volume 14; Issue 9. Aerobasics: An Introduction to Aeronautics - Airplane Performance. S P Govinda Raju. Series Article Volume 14 Issue 9 September 2009 pp 916-928. Fulltext. Click here to view fulltext PDF. Permanent link:

Emissivity measurements on aeronautical alloys

International Nuclear Information System (INIS)

Campo, L. del; Perez-Saez, R.B.; Gonzalez-Fernandez, L.; Esquisabel, X.; Fernandez, I.; Gonzalez-Martin, P.; Tello, M.J.

2010-01-01

The emissivity of three Ni and Co based aeronautical alloys is analyzed in this paper. These alloys are employed in high temperature environments whenever good corrosion resistance, high temperature resistance and high strength are essential. Thus, apart from the aeronautical industry, these alloys are also used in other technological applications, as for example, aerospace, nuclear reactors, and tooling. The results in this paper extend the emissivity data for these alloys available in the literature. Emissivity dependence on the radiation wavelength (2-22 μm), sample temperature (200-650 o C) and emission angle (0-85 o ) has been investigated. In addition, the effect of surface finish and oxidation has also been taken into consideration. The data in this paper have several applications, as temperature measurement of a target by pyrometry, low observability of airplanes and thermal radiation heat transfer simulation in airplane nozzles or furnaces.

Emissivity measurements on aeronautical alloys

Energy Technology Data Exchange (ETDEWEB)

Campo, L. del, E-mail: leire.del-campo@cnrs-orleans.f [Departamento de Fisica de la Materia Condensada, Facultad de Ciencia y Tecnologia, Universidad del Pais Vasco, Barrio Sarriena s/n, 48940 Leioa, Bizkaia (Spain); Perez-Saez, R.B., E-mail: raul.perez@ehu.e [Departamento de Fisica de la Materia Condensada, Facultad de Ciencia y Tecnologia, Universidad del Pais Vasco, Barrio Sarriena s/n, 48940 Leioa, Bizkaia (Spain); Instituto de Sintesis y Estudio de Materiales, Universidad del Pais Vasco, Apdo. 644, 48080 Bilbao (Spain); Gonzalez-Fernandez, L. [Departamento de Fisica de la Materia Condensada, Facultad de Ciencia y Tecnologia, Universidad del Pais Vasco, Barrio Sarriena s/n, 48940 Leioa, Bizkaia (Spain); Esquisabel, X.; Fernandez, I. [Industria de Turbo Propulsores, S.A., Planta de Zamudio, Edificio 300, 48170 Zamudio, Bizkaia (Spain); Gonzalez-Martin, P. [Industria de Turbo Propulsores, S.A., Parque empresarial San Fernando, Avda. Castilla 2, 28830 San Fernando de Henares, Madrid (Spain); Tello, M.J. [Departamento de Fisica de la Materia Condensada, Facultad de Ciencia y Tecnologia, Universidad del Pais Vasco, Barrio Sarriena s/n, 48940 Leioa, Bizkaia (Spain); Instituto de Sintesis y Estudio de Materiales, Universidad del Pais Vasco, Apdo. 644, 48080 Bilbao (Spain)

2010-01-21

The emissivity of three Ni and Co based aeronautical alloys is analyzed in this paper. These alloys are employed in high temperature environments whenever good corrosion resistance, high temperature resistance and high strength are essential. Thus, apart from the aeronautical industry, these alloys are also used in other technological applications, as for example, aerospace, nuclear reactors, and tooling. The results in this paper extend the emissivity data for these alloys available in the literature. Emissivity dependence on the radiation wavelength (2-22 {mu}m), sample temperature (200-650 {sup o}C) and emission angle (0-85{sup o}) has been investigated. In addition, the effect of surface finish and oxidation has also been taken into consideration. The data in this paper have several applications, as temperature measurement of a target by pyrometry, low observability of airplanes and thermal radiation heat transfer simulation in airplane nozzles or furnaces.

Friction Stir Welding of three dissimilar aluminium alloy used in aeronautics industry

Science.gov (United States)

Boşneag, A.; Constantin, M. A.; Niţu, E.; Iordache, M.

2017-10-01

Friction Stir Welding (FSW) is an innovative solid-state joining process. This process was, in first time, develop to join the similar aluminum plates but now the technology can be used to weld a large area of materials similar or dissimilar. Taking these into account FSW process, for dissimilar materials are increasingly required, more than traditional arc welding, in industrial environment. More than that FSW is used in aeronautics industry because of very good result and very good weldability between aluminum alloy used at building of airplanes, where the body of airplane are 20% aluminum alloy and this percent can be increaser in future. In this paper is presented an experimental study which includes welding three dissimilar aluminum alloy, with different properties, used in aeronautics industry, this materials are: AA 2024, AA6061 and AA7075. After welding with different parameters, the welding join and welding process will be analyzed considering process temperature, process vertical force, and roughnessof welding seams, visual aspect and microhardness.

Aerobasics–An Introduction to Aeronautics

Indian Academy of Sciences (India)

Home; Journals; Resonance – Journal of Science Education; Volume 15; Issue 5. Aerobasics - An Introduction to Aeronautics - Mini and Micro Airplanes. S P Govinda Raju. Series Article Volume 15 Issue 5 May 2010 pp 400-410. Fulltext. Click here to view fulltext PDF. Permanent link:

Aerobasics–An Introduction to Aeronautics

Indian Academy of Sciences (India)

Home; Journals; Resonance – Journal of Science Education; Volume 15; Issue 3. Aerobasics - An Introduction to Aeronautics - The Airplane Structure. S P Govinda Raju. Series Article Volume 15 Issue 3 March 2010 pp 206-222. Fulltext. Click here to view fulltext PDF. Permanent link:

Aerobasics–An Introduction to Aeronautics

Indian Academy of Sciences (India)

Home; Journals; Resonance – Journal of Science Education; Volume 14; Issue 4. Aerobasics – An Introduction to Aeronautics - The Airplane Configuration. S P Govinda Raju. Series Article Volume 14 Issue 4 April 2009 pp 328-345. Fulltext. Click here to view fulltext PDF. Permanent link:

Aerobasics–An Introduction to Aeronautics

Indian Academy of Sciences (India)

Home; Journals; Resonance – Journal of Science Education; Volume 13; Issue 11. Aerobasics – An Introduction to Aeronautics - Airplane Basics. S P Govinda Raju. Series Article Volume 13 Issue 11 November 2008 pp 1009-1019. Fulltext. Click here to view fulltext PDF. Permanent link:

Aerobasics–An Introduction to Aeronautics

Indian Academy of Sciences (India)

Home; Journals; Resonance – Journal of Science Education; Volume 15; Issue 1. Aerobasics - An Introduction to Aeronautics - Safety in Aviation. S P Govinda Raju. Series Article Volume 15 Issue 1 January 2010 pp 64-75. Fulltext. Click here to view fulltext PDF. Permanent link:

Lessons Learned from Applying Design Thinking in a NASA Rapid Design Study in Aeronautics

Science.gov (United States)

McGowan, Anna-Maria; Bakula, Casey; Castner, Raymond

2017-01-01

In late 2015, NASA's Aeronautics Research Mission Directorate (ARMD) funded an experiment in rapid design and rapid teaming to explore new approaches to solving challenging design problems in aeronautics in an effort to cultivate and foster innovation. This report summarizes several lessons learned from the rapid design portion of the study. This effort entailed learning and applying design thinking, a human-centered design approach, to complete the conceptual design for an open-ended design challenge within six months. The design challenge focused on creating a capability to advance experimental testing of autonomous aeronautics systems, an area of great interest to NASA, the US government as a whole, and an entire ecosystem of users and developers around the globe. A team of nine civil servant researchers from three of NASA's aeronautics field centers with backgrounds in several disciplines was assembled and rapidly trained in design thinking under the guidance of the innovation and design firm IDEO. The design thinking process, while used extensively outside the aerospace industry, is less common and even counter to many practices within the aerospace industry. In this report, several contrasts between common aerospace research and development practices and design thinking are discussed, drawing upon the lessons learned from the NASA rapid design study. The lessons discussed included working towards a design solution without a set of detailed design requirements, which may not be practical or even feasible for management to ascertain for complex, challenging problems. This approach allowed for the possibility of redesigning the original problem statement to better meet the needs of the users. Another lesson learned was to approach problems holistically from the perspective of the needs of individuals that may be affected by advances in topic area instead of purely from a technological feasibility viewpoint. The interdisciplinary nature of the design team also

Development of innovation infrastructure of agricultural production Lviv area

Directory of Open Access Journals (Sweden)

Vasyl Chemerys

2017-06-01

Full Text Available Innovative infrastructure of agrarian production in Lviv Area and basic problems of its development are investigated. On the basis of the conducted cluster analysis in the article six optimum areas are offered clusterizations of agricultural production, which are certain after the criterion of balanced cluster educations. The first area of clusterization is most suitable for development of plant-grower. In particular, in four its districts, almost fourth part of plant-grower products is concentrated in the permanent costs of 2010 year. The second area of clusterization can be identified as mainly stock-raising, as its localization in the districts of foot-hill of area creates favourable terms for the production of meat and milk goods. The third area can be attributed to balanced stock-raising-plant-grower straight, with development of agriculture, oriented to the sale of products to the cities, above all things in Lviv. The fourth area of clusterization can be considered mainly plant-grower-oriented with simultaneous development of the suckling cattle breeding. The fifth area of clusterization, as marked already, can be identified as innovative oriented with predominance of stock-raising and production of goods on an export. A sixth (mountain area of clusterization is the least suitable for development of agriculture (except for the milk and meat cattle breeding. The applied approach is based on the account of ten key indexes which characterize potential of agricultural production development in each districts of Lviv Area: products of plant-grower are in all categories of economic agents; products of stock-raising are in all categories of economic agents; area of agricultural lands which are engaged in an agricultural production area of plough-land of economic agents which are engaged in an agricultural production; sowing areas are in all categories of economic agents; a quantity of cattle is in all categories of economic agents; a quantity of

Wireless Sensor Applications in Extreme Aeronautical Environments

Science.gov (United States)

Wilson, William C.; Atkinson, Gary M.

2013-01-01

NASA aeronautical programs require rigorous ground and flight testing. Many of the testing environments can be extremely harsh. These environments include cryogenic temperatures and high temperatures (greater than 1500 C). Temperature, pressure, vibration, ionizing radiation, and chemical exposure may all be part of the harsh environment found in testing. This paper presents a survey of research opportunities for universities and industry to develop new wireless sensors that address anticipated structural health monitoring (SHM) and testing needs for aeronautical vehicles. Potential applications of passive wireless sensors for ground testing and high altitude aircraft operations are presented. Some of the challenges and issues of the technology are also presented.

Astronautics and aeronautics, 1977: A chronology

Science.gov (United States)

Ritchie, E. H.

1986-01-01

This publication is a chronology of events during the year 1977 in the fields of aeronautical and space research, development, activity, and policy. It includes appendixes, an index, and illustrations. Chronological entries list sources for further inquiry.

World Area Forecast System (WAFS)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — The World Area Forecast System (WAFS) is a worldwide system by which world area forecast centers provide aeronautical meteorological en-route forecasts in uniform...

ROMANIAN AERONAUTICAL METEOROLOGY APPLICABLE LEGAL FRAMEWORK –BRIEFING

Directory of Open Access Journals (Sweden)

CATALIN POPA

2012-05-01

Full Text Available The purpose of this briefing is toprovide an overview of the aeronautical meteorology legal framework in Romania. In this context, the role and importance of aeronautical meteorology in international air traffic management will be underlined, with focus on the civil aviation activity in Romania. The international legal framework and modalities of implementing these rules at national level will constitute a significant part of the present study., Specific accent will be put on the national regulatory framework and structure, means of updating it, and how it responds to changing regulatory requirements.

Experiment In Aeronautical-Mobile/Satellite Communication

Science.gov (United States)

Jedrey, Thomas C.; Lay, Norman E.; Dessouky, Khaled

1992-01-01

Report describes study of performance of digital mobile/satellite communication terminals of advanced design intended for use in ground stations and airplanes in aeronautical-mobile service. Study was collaboration of NASA, Federal Aviation Administration (FAA), Communications Satellite Corp. (COMSAT), and International Maritime Satellite System (INMARSAT).

Aeronautical Engineering Education in Spain: Changing Needs in an Evolving Environment.

Science.gov (United States)

Martinez-Val, Rodrigo

1997-01-01

Describes the successive stages of the School of Aeronautical Engineering of Madrid, Spain, in terms of entry requirements, curricula guidelines, options or specialties, duration of studies, and number of graduates. Also includes a description of the Spanish aeronautical industry and its evolution. (Author/PVD)

Applied simulation and optimization in logistics, industrial and aeronautical practice

CERN Document Server

Mota, Idalia; Serrano, Daniel

2015-01-01

Presenting techniques, case-studies and methodologies that combine the use of simulation approaches with optimization techniques for facing problems in manufacturing, logistics, or aeronautical problems, this book provides solutions to common industrial problems in several fields, which range from manufacturing to aviation problems, where the common denominator is the combination of simulation’s flexibility with optimization techniques’ robustness. Providing readers with a comprehensive guide to tackle similar issues in industrial environments, this text explores novel ways to face industrial problems through hybrid approaches (simulation-optimization) that benefit from the advantages of both paradigms, in order to give solutions to important problems in service industry, production processes, or supply chains, such as scheduling, routing problems and resource allocations, among others.

Astronautics and aeronautics, 1976. A chronology

Science.gov (United States)

Ritchie, E. H.

1984-01-01

A chronology of events concerning astronautics and aeronautics for the year 1976 is presented. Some of the many and varied topics include the aerospace industry, planetary exploration, space transportation system, defense department programs, politics, and aerospace medicine. The entries are organized by the month and presented in a news release format.

78 FR 10248 - Public Notice for Waiver of Aeronautical Land-Use Assurance

Science.gov (United States)

2013-02-13

... proposal to change a portion of airport land from aeronautical use to non-aeronautical use and to authorize the sale of the airport property. The Will County Department of Highways has offered fair market value...

Electromagnetic surface waves for large-area RF plasma productions between large-area planar electrodes

International Nuclear Information System (INIS)

Nonaka, S.

1992-01-01

Recently, large-area plasma production has been tested by means of a 13.56 MHz radio-frequency (RF) discharge between a pair of large-area planar electrodes, approximately 0.5 m x 1.4 m, as one of the semiconductor technologies for fabrication of large-area amorphous silicon solar cells in the ''Sunshine Project'' of the Agency of Industrial Science and Technology in Japan. We also confirmed long plasma production between a pair of long electrodes. In this paper, normal electromagnetic (EM) waves propagating in a region between a planar waveguide with one plasma and two dielectric layers are analyzed in order to study the feasibility of large-area plasma productions by EM wave-discharges between a pair of large-area RF electrodes larger than the half-wavelength of RF wave. In conclusion, plasmas higher than an electron plasma frequency will be produced by an odd TMoo surface mode. (author) 4 refs., 3 figs

Astronautics and Aeronautics, 1979-1984: A chronology

Science.gov (United States)

Janson, Bette R.; Ritchie, Eleanor H.

1989-01-01

This volume of the Astronautics and Aeronautics series covers 1979 through 1984. The series provides a chronological presentation of all significant events and developments in space exploration and the administration of the space program during the period covered.

Astronautics and aeronautics, 1978: A chronology

Science.gov (United States)

Janson, Bette R.

1986-01-01

This is the 18th in a series of annual chronologies of significant events in the fields of astronautics and aeronautics. Events covered are international as well as national and political as well as scientific and technical. This series is a reference work for historians, NASA personnel, government agencies, congressional staffs, and the media.

Fundamental Aeronautics Program: Overview of Project Work in Supersonic Cruise Efficiency

Science.gov (United States)

Castner, Raymond

2011-01-01

The Supersonics Project, part of NASA?s Fundamental Aeronautics Program, contains a number of technical challenge areas which include sonic boom community response, airport noise, high altitude emissions, cruise efficiency, light weight durable engines/airframes, and integrated multi-discipline system design. This presentation provides an overview of the current (2011) activities in the supersonic cruise efficiency technical challenge, and is focused specifically on propulsion technologies. The intent is to develop and validate high-performance supersonic inlet and nozzle technologies. Additional work is planned for design and analysis tools for highly-integrated low-noise, low-boom applications. If successful, the payoffs include improved technologies and tools for optimized propulsion systems, propulsion technologies for a minimized sonic boom signature, and a balanced approach to meeting efficiency and community noise goals. In this propulsion area, the work is divided into advanced supersonic inlet concepts, advanced supersonic nozzle concepts, low fidelity computational tool development, high fidelity computational tools, and improved sensors and measurement capability. The current work in each area is summarized.

Classification of Aeronautics System Health and Safety Documents

Data.gov (United States)

National Aeronautics and Space Administration — Most complex aerospace systems have many text reports on safety, maintenance, and associated issues. The Aviation Safety Reporting System (ASRS) spans several...

Multipath modeling for aeronautical communications.

Science.gov (United States)

Painter, J. H.; Gupta, S. C.; Wilson, L. R.

1973-01-01

One of the fundamental technical problems in aeronautical digital communications is that of multipath propagation between aircraft and ground terminal. This paper examines in detail a model of the received multipath signal that is useful for application of modern detection and estimation theories. The model treats arbitrary modulation and covers the selective and nonselective cases. The necessarily nonstationary statistics of the received signal are determined from the link geometry and the surface roughness parameters via a Kirchhoff solution.

Aeronautics. An Educator's Guide with Activities in Science, Mathematics, and Technology Education: What Pilot, Astronaut, or Aeronautical Engineer didn't Start out with a Toy Glider?

Science.gov (United States)

Biggs, Pat (Editor); Huetter, Ted (Editor)

1998-01-01

Welcome to the exciting world of aeronautics. The term aeronautics originated in France, and was derived from the Greek words for "air" and "to sail." It is the study of flight and the operation of aircraft. This educator guide explains basic aeronautical concepts, provides a background in the history of aviation, and sets them within the context of the flight environment (atmosphere, airports, and navigation). The activities in this guide are designed to be uncomplicated and fun. They have been developed by NASA Aerospace Education Services Program specialists, who have successfully used them in countless workshops and student programs around the United States. The activities encourage students to explore the nature of flight, and experience some real-life applications of mathematics, science, and technology. The subject of flight has a wonderful power to inspire learning.

Groundwater and quaternary geological studies of potential peat production areas - useful tool for sustainable peat production

Energy Technology Data Exchange (ETDEWEB)

Valpola, S.E.; Paalijaervi, M. (Geological Survey of Finland, Kokkola (Finland)), Email: samu.valpola@gtk.fi, Email: miikka.paalijarvi@gtk.fi

2009-07-01

Potential peat production areas in Finland are often situated in vicinity of eskers or other quaternary (glaciofluvial) formations. Frequently these formations are also important groundwater resources and it is essential for sustainable peat production to assure that these resources will not be endangered. The Geological Survey of Finland (GTK) has concluded several quaternary geological studies on potential peat production areas, which are connected to locally important groundwater areas. These studies have been made using mainly ground penetrating radar (GPR) and light drilling equipment. The main objective of these studies has been to establish the local groundwater flow directions and the quality and extent of quaternary deposits. The increasing need of peat production areas has created an evident demand of cost-effective and fast research methods which can be used for providing reliable information for planning of new production areas. (orig.)

Astronautics and aeronautics, 1974: A chronology

Science.gov (United States)

Brun, N. L.

1977-01-01

The 14th volume in the NASA series of day-by-day records of aeronautical and space events has somewhat narrowed its scope and selectivity in its brief accounts from immediately available, open sources. This year the emphasis is even more directly focused on concrete air and space activities. The text continues to reflect some events in other agencies and countries.

Review on energy harvesting for structural health monitoring in aeronautical applications

Science.gov (United States)

Le, Minh Quyen; Capsal, Jean-Fabien; Lallart, Mickaël; Hebrard, Yoann; Van Der Ham, Andre; Reffe, Nicolas; Geynet, Lionel; Cottinet, Pierre-Jean

2015-11-01

This paper reviews recent developments in energy harvesting technologies for structural health monitoring (SHM) in aeronautical applications. Aeronautical industries show a great deal of interest in obtaining technologies that can be used to monitor the health of machinery and structures. In particular, the need for self-sufficient monitoring of structures has been ever-increasing in recent years. Autonomous SHM systems typically include embedded sensors, and elements for data acquisition, wireless communication, and energy harvesting. Among all of these components, this paper focuses on energy harvesting technologies. Actually, low-power sensors and wireless communication components are used in newer SHM systems, and a number of researchers have recently investigated such techniques to extract energy from the local environment to power these stand-alone systems. The first part of the paper is dedicated to the different energy sources available in aeronautical applications, i.e., for airplanes and helicopters. The second part gives a presentation of the various devices developed for converting ambient energy into electric power. The last part is dedicated to a comparison of the different technologies and the future development of energy harvesting for aeronautical applications.

Update on Area Production in Mixing of Supercritical Fluids

Science.gov (United States)

Okongo, Nora; Bellan, Josette

2003-01-01

The focus of this research is on supercritical C7H16/N2 and O2/H2 mixing layers undergoing transitions to turbulence. The C7H16/N2 system serves as a simplified model of hydrocarbon/air systems in gas-turbine and diesel engines; the O2/H2 system is representative of liquid rocket engines. One goal of this research is to identify ways of controlling area production to increase disintegration of fluids and enhance combustion in such engines. As used in this research, "area production" signifies the fractional rate of change of surface area oriented perpendicular to the mass-fraction gradient of a mixing layer. In the study, a database of transitional states obtained from direct numerical simulations of the aforementioned mixing layers was analyzed to investigate global layer characteristics, phenomena in regions of high density-gradient magnitude (HDGM), irreversible entropy production and its relationship to the HDGM regions, and mechanisms leading to area production.

Aeronautics Education, Research, and Industry Alliance (AERIAL) Year 2 Report and Year 3 Proposal

Science.gov (United States)

Bowen, Brent D.; Box, Richard C.; Fink, Mary M.; Gogos, Geroge; Lehrer, Henry R.; Narayanan, Ram M.; Nickerson, Jocelyn S.; Tarry, Scott E.; Vlasek, Karisa D.

2003-01-01

The Aeronautics Education, Research, and Industry Alliance (AERIAL): a comprehensive, multi-faceted NASA EPSCoR 2000 initiative, contributes to the strategic research and technology priorities of NASA while intensifying Nebraska s rapidly growing aeronautics research and development endeavors. AERIAL enables Nebraska researchers to: (a) continue strengthening their collaborative relationships with NASA Field Centers, Codes, and Enterprises; (b) increase the capacity of higher education throughout Nebraska to invigorate and expand aeronautics research; and (c) expedite the development of aeronautics-related research infrastructure and industry in the state. This report contains a summary of AERIAL's activities and accomplishments during the second year of implementation. The AERIAL Year 3 proposal is also included.

Aeronautics Autonomy Testbed Capability (AATC) Team Developed Concepts

Science.gov (United States)

Smith, Phillip J.

2018-01-01

In 2015, the National Aeronautics and Space Administration (NASA) formed a multi-center, interdisciplinary team of engineers from three different aeronautics research centers who were tasked with improving NASA autonomy research capabilities. This group was subsequently named the Aeronautics Autonomy Testbed Capability (AATC) team. To aid in confronting the autonomy research directive, NASA contracted IDEO, a design firm, to provide consultants and guides to educate NASA engineers through the practice of design thinking, which is an unconventional method for aerospace design processes. The team then began learning about autonomy research challenges by conducting interviews with a diverse group of researchers and pilots, military personnel and civilians, experts and amateurs. Part of this design thinking process involved developing ideas for products or programs known as concepts that could enable real world fulfillment of the most important latent needs identified through analysis of the interviews. The concepts are intended to be sacrificial, intermediate steps in the design thinking process and are presented in this report to record the efforts of the AATC group. Descriptions are provided in present tense to allow for further ideation and imagining the concept as reality as was attempted during the teams discussions and interviews. This does not indicate that the concepts are actually in practice within NASA though there may be similar existing programs independent of AATC. These concepts were primarily created at two distinct stages during the design thinking process. After the initial interviews, there was a workshop for concept development and the resulting ideas are shown in this work as from the First Round. As part of succeeding interviews, the team members presented the First Round concepts to refine the understanding of existing research needs. This knowledge was then used to generate an additional set of concepts denoted as the Second Round. Some

Aeronautical telecommunications network advances, challenges, and modeling

CERN Document Server

Musa, Sarhan M

2015-01-01

Addresses the Challenges of Modern-Day Air Traffic Air traffic control (ATC) directs aircraft in the sky and on the ground to safety, while the Aeronautical Telecommunications Network (ATN) comprises all systems and phases that assist in aircraft departure and landing. The Aeronautical Telecommunications Network: Advances, Challenges, and Modeling focuses on the development of ATN and examines the role of the various systems that link aircraft with the ground. The book places special emphasis on ATC-introducing the modern ATC system from the perspective of the user and the developer-and provides a thorough understanding of the operating mechanism of the ATC system. It discusses the evolution of ATC, explaining its structure and how it works; includes design examples; and describes all subsystems of the ATC system. In addition, the book covers relevant tools, techniques, protocols, and architectures in ATN, including MIPv6, air traffic control (ATC), security of air traffic management (ATM), very-high-frequenc...

A Glimpse of Scientific Research on Fundamental Problems of Military and Civil Aeronautics

Science.gov (United States)

1939-01-01

Among the outstanding accomplishments of the last century is man's conquest of the air. That conquest began in 1903 when the Wright brothers made the first successful flight of an airplane at Kitty Hawk, N. C. Five years later the United States Government purchased its first airplane for the use of the Army, and began the training of officers for military flying. During the years immediately preceding the outbreak of the World War the Government and a meager aircraft industry had made important progress, but the Government, practically the only customer, had purchased less than 100 airplanes. In the meantime, leading European nations, sensing acutely the potentialities of aircraft in warfare, had made greater progress and had begun laying the foundations for the new science of aeronautics. The World War gave a remarkable impetus to the development of aeronautics and emphasized the need for organized research on the fundamental problems of flight. By act of Congress approved March 3, 1915, the National Advisory Committee for Aeronautics was created and charged with the duty of supervising, directing, and conducting fundamental scientific research and experiment in aeronautics. With the farsighted support of the Congress the Committee has led the world in the development of unique aeronautical research facilities in its laboratories at Langley Field, Va. The research programs include problems initiated by the Committee and its subcommittees and also investigations requested by the Army, the Navy, and the Civil Aeronautics Authority. The results of researches conducted under one control, serve without duplication of effort, the needs of all branches of aviation, civil and military, and exert a profound influence on the progress of aeronautics by improving the performance, efficiency, and safety of aircraft. A brief description of the results of some of the committee's researches and of the equipment employed will be found in the following pages.

76 FR 6827 - Public Availability of the National Aeronautic and Space Administration FY 2010 Service Contract...

Science.gov (United States)

2011-02-08

... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION Public Availability of the National Aeronautic and Space Administration FY 2010 Service Contract Inventory AGENCY: National Aeronautic and Space Administration. ACTION: Notice of public availability of FY 2010 Service Contract Inventories. [[Page 6828...

TEXTILE STRUCTURES FOR AERONAUTICS (PART I

Directory of Open Access Journals (Sweden)

SOLER Miquel

2014-05-01

Full Text Available Three-dimensional (3D textile structures with better delamination resistance and damage impact tolerance to be applied in composites for structural components is one of the main goals of the aeronautical industry. Textile Research Centre in Canet de Mar has been working since 2008 in this field. Our staff has been designing, developing and producing different textile structures using different production methods and machinery to improve three-dimensional textile structures as fiber reinforcement for composites. This paper describes different tests done in our textile labs from unidirectional structures to woven, knitted or braided 3 D textile structures. Advantages and disadvantages of each textile structure are summarized. The first part of this paper deals with the introduction of our Textile Research Centre in the field of composites and carbon fiber as a main material to produce three – dimensional textile structures. The use of composite materials in aerospace structures has increased over the past decades. Our contribution related to this field consists of the development of three- dimensional textile structures and even the adaptation and improvement of machinery to do it possible. Carbon fiber provides advantages as volumetric fraction and minimum fault occurrence. However carbon fiber has also disadvantages as uncomfortable handling delamination and high cost of material and processing.

78 FR 13383 - Public Availability of the National Aeronautics and Space Administration FY 2012 Service Contract...

Science.gov (United States)

2013-02-27

... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION Public Availability of the National Aeronautics and Space Administration FY 2012 Service Contract Inventory (SCI) AGENCY: Office of Procurement, National Aeronautics and Space Administration. ACTION: Notice of Public Availability of the FY 2012 Service Contract...

77 FR 7183 - Public Availability of the National Aeronautics and Space Administration FY 2011 Service Contract...

Science.gov (United States)

2012-02-10

... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION Public Availability of the National Aeronautics and Space Administration FY 2011 Service Contract Inventory AGENCY: National Aeronautics and Space Administration. ACTION: Notice of Public Availability of Analysis of the FY 2010 Service Contract Inventories and...

76 FR 82106 - Airworthiness Directives; Lockheed Martin Corporation/Lockheed Martin Aeronautics Company Airplanes

Science.gov (United States)

2011-12-30

... Certification Office (ACO), 1701 Columbia Avenue, College Park, Georgia 30337; phone: (404) 474-5554; fax: (404... airworthiness directive (AD) for certain Lockheed Martin Corporation/Lockheed Martin Aeronautics Company Model L..., Lockheed Martin Corporation/Lockheed Martin Aeronautics Company, Airworthiness Office, Dept. 6A0M, Zone...

HANPP Collection: Human Appropriation of Net Primary Productivity (HANPP) by Country and Product

Data.gov (United States)

National Aeronautics and Space Administration — The Human Appropriation of Net Primary Productivity (HANPP) by Country and Product portion of the HANPP Collection contains tabular data on carbon-equivalents of...

77 FR 63275 - Airworthiness Directives; Lockheed Martin Corporation/Lockheed Martin Aeronautics Company Airplanes

Science.gov (United States)

2012-10-16

... Certification Office (ACO), 1701 Columbia Avenue, College Park, Georgia 30337; phone: 404-474-5554; fax: 404-474... directive (AD) that applies to all Lockheed Martin Corporation/Lockheed Martin Aeronautics Company Model L.../Lockheed Martin Aeronautics Company, Airworthiness Office, Dept. 6A0M, Zone 0252, Column P-58, 86 S. Cobb...

Annual cropped area expansion and agricultural production ...

African Journals Online (AJOL)

Ethiopian Journal of Environmental Studies and Management ... considerable annual increase of varying extent over time and space for both annual output and area ... The study suggests improving productivity through sustainable agricultural ...

A geostationary satellite system for mobile multimedia applications using portable, aeronautical and mobile terminals

Science.gov (United States)

Losquadro, G.; Luglio, M.; Vatalaro, F.

1997-01-01

A geostationary satellite system for mobile multimedia services via portable, aeronautical and mobile terminals was developed within the framework of the Advanced Communications Technology Service (ACTS) programs. The architecture of the system developed under the 'satellite extremely high frequency communications for multimedia mobile services (SECOMS)/ACTS broadband aeronautical terminal experiment' (ABATE) project is presented. The system will be composed of a Ka band system component, and an extremely high frequency band component. The major characteristics of the space segment, the ground control station and the portable, aeronautical and mobile user terminals are outlined.

Net Farm Income Analysis of Maize Production in Gwagwalada Area ...

African Journals Online (AJOL)

Net Farm Income Analysis of Maize Production in Gwagwalada Area Council of Federal Capital Territory, Nigeria. OO Alabi, AAA Coker, ME Idegbesor. Abstract. This study examined net farm income of maize production in Gwagwalada Area Council of Federal Capital Territory. The specific objectives are to: identify the ...

Rural Poultry Production in Ondo South Senatorial District Area of ...

African Journals Online (AJOL)

Rural Poultry Production in Ondo South Senatorial District Area of Ondo State, Nigeria. ... African Journal of Livestock Extension ... The need to obtain baseline information on rural poultry with respect to their population and the production potentials of the indigenous chicken under the village conditions in Ondo Area formed ...

Fundamental Aeronautics Program: Overview of Propulsion Work in the Supersonic Cruise Efficiency Technical Challenge

Science.gov (United States)

Castner, Ray

2012-01-01

The Supersonics Project, part of NASA's Fundamental Aeronautics Program, contains a number of technical challenge areas which include sonic boom community response, airport noise, high altitude emissions, cruise efficiency, light weight durable engines/airframes, and integrated multi-discipline system design. This presentation provides an overview of the current (2012) activities in the supersonic cruise efficiency technical challenge, and is focused specifically on propulsion technologies. The intent is to develop and validate high-performance supersonic inlet and nozzle technologies. Additional work is planned for design and analysis tools for highly-integrated low-noise, low-boom applications. If successful, the payoffs include improved technologies and tools for optimized propulsion systems, propulsion technologies for a minimized sonic boom signature, and a balanced approach to meeting efficiency and community noise goals. In this propulsion area, the work is divided into advanced supersonic inlet concepts, advanced supersonic nozzle concepts, low fidelity computational tool development, high fidelity computational tools, and improved sensors and measurement capability. The current work in each area is summarized.

Robust Control of Aeronautical Electrical Generators for Energy Management Applications

Directory of Open Access Journals (Sweden)

Giacomo Canciello

2017-01-01

Full Text Available A new strategy for the control of aeronautical electrical generators via sliding manifold selection is proposed, with an associated innovative intelligent energy management strategy used for efficient power transfer between two sources providing energy to aeronautical loads, having different functionalities and priorities. Electric generators used for aeronautical application involve several machines, including a main generator and an exciter. Standard regulators (PI or PID-like are normally used for the rectification of the generator voltage to be used to supply a high-voltage DC bus. The regulation is obtained by acting on a DC/DC converter that imposes the field voltage of the exciter. In this paper, the field voltage is fed to the generator windings by using a second-order sliding mode controller, resulting into a stable, robust (against disturbances action and a fast convergence to the desired reference. By using this strategy, an energy management strategy is proposed that dynamically changes the voltage set point, in order to intelligently transfer power between two voltage busses. Detailed simulation results are provided in order to show the effectiveness of the proposed energy management strategy in different scenarios.

A Digital Library for the National Advisory Committee for Aeronautics

Science.gov (United States)

Nelson, Michael L.

1999-01-01

We describe the digital library (DL) for the National Advisory Committee for Aeronautics (NACA), the NACA Technical Report Server (NACATRS). The predecessor organization for the National Aeronautics and Space Administration (NASA), NACA existed from 1915 until 1958. The primary manifestation of NACA's research was the NACA report series. We describe the process of converting this collection of reports to digital format and making it available on the World Wide Web (WWW) and is a node in the NASA Technical Report Server (NTRS). We describe the current state of the project, the resulting DL technology developed from the project, and the future plans for NACATRS.

VFR Class B Graphics - Aeronautical Information Services Digital Products

Data.gov (United States)

Department of Transportation — These graphics are designed to increase safety and aid pilots in gaining situational awareness within existing and redesigned Class B areas. The graphic provides an...

Airport Movement Area Closure Planner, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — This SBIR research develops an automation tool improving temporary and permanent runway closure management. The Movement Area Closure Planner (MACP) provides airport...

The Analysis of the Available Technology of Exploiting and Applying Biohydrocarbons for Fuel Production Part I

Directory of Open Access Journals (Sweden)

Gielo-Klepacz Halina

2017-08-01

Full Text Available The article shows the current state of knowledge in the area of applying biohydrocarbons for fuel production, especially in aeronautical applications and to power compression-ignition engines. The technologies based on biochemical and thermal/chemical conversion of biomass are described. Technological potential of these technologies is evaluated. The article is based on the literature review.

Astronautics and aeronautics, 1972. [a chronology of events

Science.gov (United States)

1974-01-01

Important events of the U. S. space program during 1972 are recorded in a chronology which encompasses all NASA, NASA related, and international cooperative efforts in aeronautics and astronautics. Personnel and budget concerns are documented, along with the major developments in aircraft research, manned space flight, and interplanetary exploration.

HANPP Collection: Human Appropriation of Net Primary Productivity as a Percentage of Net Primary Productivity

Data.gov (United States)

National Aeronautics and Space Administration — The Human Appropriation of Net Primary Productivity (HANPP) as a Percentage of Net Primary Product (NPP) portion of the HANPP Collection represents a map identifying...

Journey in Aeronautical Research: A Career at NASA Langley Research Center. No. 12; Monographs in Aerospace History

Science.gov (United States)

Phillips, W. Hewitt

1998-01-01

An autobiography, of a noted aeronautical engineer, W. Hewitt Phillips, whose career spanned 58 years (1940-1998) at NASA Langley is presented. This work covers his early years to the Sputnik launch. His interests have been in research in aeronautics and in the related problems of spaceflight. After an introduction, his early life through the college years is reviewed, and his early interest in model airplanes is described. The first assignment for the National Advisory Committee for Aeronautics (NACA), which would later become NASA, was with the Flight Research Division. His early work involved "Flying Qualities", i.e., the stability and control characteristics of an airplane. The next chapter describes his early analytical studies. His work during World War II in the design of military airplanes, and the other effects of the war on research activities, is covered in the next two chapters. This research was involved in such innovations and refinements as the swept wing, the flettner tabs, servo tabs, spring tabs and whirlerons. The rest of the work covers the research which Mr. Hewitt was involved in, after the war until the Sputnik launch. These areas include unsteady lift, measurements of turbulence in the atmosphere, gust alleviation, and lateral response to random turbulence. He was also involved in several investigations of airplane accidents. The last two chapters cover the administration of the Langley Research Center, and the dawn of the Space Age. A complete bibliography of reports written by Mr. Hewitt, is included.

14 CFR 61.313 - What aeronautical experience must I have to apply for a sport pilot certificate?

Science.gov (United States)

2010-01-01

... apply for a sport pilot certificate? 61.313 Section 61.313 Aeronautics and Space FEDERAL AVIATION... GROUND INSTRUCTORS Sport Pilots § 61.313 What aeronautical experience must I have to apply for a sport... aeronautical experience you must have to apply for a sport pilot certificate: If you are applying for a sport...

78 FR 38091 - Airworthiness Criteria: Proposed Airship Design Criteria for Lockheed Martin Aeronautics Model...

Science.gov (United States)

2013-06-25

..., 2012 Lockheed Martin Aeronautics submitted an application for type certification for the model LMZ1M..., views, or arguments as they may desire. Commenters should identify the proposed design criteria on the... Lockheed Martin Aeronautics submitted an application for type certification for the model LMZ1M airship...

Aeronautical Materials (Selected Articles),

Science.gov (United States)

1984-03-13

technique of structural alloy steel and to find a tempering technique rational for the bainite structure. Test Steel and Test Method 1. This paper used an...ultrahigh tensile steel 30CrMnSiNi2A. Because this steel widely uses bainite or martensite isothermal quenching techniques in production, the large parts...made by this steel possibly have bainite and Ar when in martensite area isothermal quenching or quenching oil and when there is temper- ing. It is

The Role of the U.S. Government Technical Report in Aeronautics: An Exploratory Study

Science.gov (United States)

1988-08-01

survey questionnaire. 14 23. Technical Discipline -- for purposes of this study technical disciplines include aeronautics, astronautics, chemistry ...report varies because it serves different roles in communicating within and between organizations. The technical report has been defined etymologically ...and Information Systems - Administrative/Management - Other o Technical Discipline * - Aeronautics - Astronautics - Chemistry and Materials

77 FR 54945 - Notice of Intent To Rule on Change in Use of Aeronautical Property at Louisville International...

Science.gov (United States)

2012-09-06

... Use of Aeronautical Property at Louisville International Airport, Louisville, KY AGENCY: Federal... portion of airport property from aeronautical to non- aeronautical use at the Louisville International.... This action is taken under the provisions of Section 125 of the Wendell H. Ford Aviation Investment...

75 FR 68024 - Notice of Intent To Rule on Change in Use of Aeronautical Property at Louisville International...

Science.gov (United States)

2010-11-04

... Use of Aeronautical Property at Louisville International Airport, Louisville, KY AGENCY: Federal... portion of airport property from aeronautical to non- aeronautical use at the Louisville International.... This action is taken under the provisions of Section 125 of the Wendell H. Ford Aviation Investment...

77 FR 40405 - Notice of a Non-Aeronautical Land-Use Change Effecting the Quitclaim Deed and Federal Grant...

Science.gov (United States)

2012-07-09

... the application for a non-aeronautical land- use change for approximately 38 acres of airport property... DEPARTMENT OF TRANSPORTATION Federal Aviation Administration Notice of a Non-Aeronautical Land-Use..., Delano, CA AGENCY: Federal Aviation Administration, DOT. ACTION: Notice of a Non-Aeronautical Land-Use...

77 FR 13173 - Notice of a Non-Aeronautical Land-Use Change Effecting the Quitclaim Deed and Federal Grant...

Science.gov (United States)

2012-03-05

... AGENCY: Federal Aviation Administration, DOT. ACTION: Notice of a Non-aeronautical land-use change... application for a non-aeronautical land- use change for approximately 829 acres of airport property at Blythe... DEPARTMENT OF TRANSPORTATION Federal Aviation Administration Notice of a Non-Aeronautical Land-Use...

MODIS/Aqua Atmosphere Aeronet Subsetting Product

Data.gov (United States)

National Aeronautics and Space Administration — The MODIS/Aqua Atmosphere Aeronet Subsetting Product (MYDARNSS) consists of MODIS Atmosphere and Ancillary Products subsets that are generated over a number of...

Annual view (1999) - aeronautic relation/space relation. Aeronautic relation - flight preparation; Nenkan tenbo (1999) koku kankei uchu kankei. Unko seibi kanren

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-05

The year of 1999 to airline companies was exactly a year when they had to tackle the Y2K issue all the time with no introduction of new model planes. For the purpose of much appealing for aeronautical safety, the government and private companies jointly made a demonstration flight simulating the shift to a new year in September. The persons concerned in the Civil Aviation Bureau, the Ministry of Transport, mass communication, and airline companies were on the flight. The demonstration flight was finished with no big troubles. The standard weight of passengers, etc. which is used for weight/gravity center position management of airliners was to be newly set. Following the domestic line in 1998, the standard weight of the international line was set in 1999. As a new flight system, RVSM flight is planned to be started in the Pacific air area in February 2000. In the RVSM flight, airplane is flown by shortening vertical control intervals from 2000ft to 1000ft at the altitude between 29,000ft and 41,000ft. In 1999, domestic airline companies decided on no smoking at all the seats in both the domestic line and international line. (NEDO)

The Vernier System at the Faculty of Aeronautics

Science.gov (United States)

Budajová, Kristína; Komová, Eva; Berežný, Štefan; Glaser-Opitz, Henrich

2017-01-01

This article describes an educational challenge which was prepared for students at the faculty of Aeronautics, Technical University of Košice. Our goal is to improve the methods of the practical training by introducing modern automation and information technologies to the experiments and to the processing of acquired data. We have updated our…

National Aeronautics and Space Administration FY 2001 Accountability Report

Science.gov (United States)

2001-01-01

The National Aeronautics and Space Administration (NASA) is an independent Agency established to plan and manage the future of the Nation's civil aeronautics and space program. This Accountability Report covers Federal Fiscal Year (FY) 2001 (October 1, 2000, through September 30, 2001), with discussion of some subsequent events The Report contains an overview addressing the Agency's critical programs and financial performance and includes highlights of performance organized by goals and objectives of the Enterprises and Crosscutting Processes. The Report also summarizes NASA's stewardship over budget and financial resources, including audited financial statements and footnotes. The financial statements reflect an overall position of offices and activities, including assets and liabilities, as well as results of operations, pursuant to requirements of Federal law (31 U.S.C. 3515(b)). The auditor's opinions on NASA's financial statements, reports on internal controls, and compliance with laws and regulations are included in this Report.

Exploration of Risks in Autonomous Decision-Making Applied to Aeronautics

Data.gov (United States)

National Aeronautics and Space Administration — Prior research into metrics and design for autonomy were presented. At this time, the prospect of adding significant autonomous decision-making on a piloted aircraft...

14 CFR 93.177 - Operations in the Special Air Traffic Rule Area.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 2 2010-01-01 2010-01-01 false Operations in the Special Air Traffic Rule Area. 93.177 Section 93.177 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) AIR TRAFFIC AND GENERAL OPERATING RULES SPECIAL AIR TRAFFIC RULES Special Flight Rules in the Vicinity of Luke AFB, AZ §...

Researches and studies regarding brazed aluminium alloys microstructure used in aeronautic industry

Directory of Open Access Journals (Sweden)

A. Dimitrescu

2015-04-01

Full Text Available Brazing is applied to the merge of the pieces which are most required, tensile strength of the solder can reach high values. By brazing there can be assembled pieces of most metals and ferrous and nonferrous alloys, with high melting temperature. This paper presents an analysis of the microstructure of materials from a brazed merge of aluminum alloy L103 which is often used to produce pieces of aeronautical industry. Brazing material was performed using several technologies, and after examination of the microstructure of materials from the merge area it was established as optimal technology the technology which consist of pickling in Aloclene 100 solution with the deposition of filler material on both sides of the base material and the use of spectral acetylene and neutral flame.

Fundamentals of Aerospace Engineering: An introductory course to aeronautical engineering

OpenAIRE

Soler, Manuel

2014-01-01

Fundamentals of Aerospace Engineering is a text book that provides an introductory, thorough overview of aeronautical engineering, and it is aimed at serving as reference for an undergraduate course on aerospace engineering.

Human exposure to polybrominated diphenyl ethers at production area, China.

Science.gov (United States)

Jin, Jun; Wang, Ying; Yang, Congqiao; Hu, Jicheng; Liu, Weizhi; Cui, Jian

2010-05-01

The concentrations of polybrominated diphenyl ethers (PBDEs) were detected in air and aquatic products in PBDEs production areas which are located at the south coast area of Laizhou Bay, Shandong province, China in this study. Concentrations of SigmaPBDEs in the air ranged from 0.47 ng/m3 to 161 ng/m3. In aquatic products, concentrations of SigmaPBDEs ranged from 2.7 ng/g wet weight to 42 ng/g wet weight. The mean dietary intake of SigmaPBDEs via aquatic products consumption in this study was 218 ng/day. Daily intake of SigmaPBDEs via inhalation in this study was 612 ng for men and 455 ng for women. With a contribution of 80%, BDE-209 was predominant in the total intake. Dietary intake and breathing inhalation contributed 29 and 71%, respectively, to the total PBDEs intake. The results indicate that breathing inhalation also plays a very significant pathway for the population of the PBDEs production area. Compared with similar studies in other countries, human exposure to PBDEs via diet and inhalation in this study was the highest in the world. Copyright (c) 2010 SETAC.

An application of characteristic function in order to predict reliability and lifetime of aeronautical hardware

Energy Technology Data Exchange (ETDEWEB)

Żurek, Józef; Kaleta, Ryszard; Zieja, Mariusz [Air Force Institute of Technology ul. Księcia Bolesława 6 01-494 Warsaw (Poland)

2016-06-08

The forecasting of reliability and life of aeronautical hardware requires recognition of many and various destructive processes that deteriorate the health/maintenance status thereof. The aging of technical components of aircraft as an armament system proves of outstanding significance to reliability and safety of the whole system. The aging process is usually induced by many and various factors, just to mention mechanical, biological, climatic, or chemical ones. The aging is an irreversible process and considerably affects (i.e. reduces) reliability and lifetime of aeronautical equipment. Application of the characteristic function of the aging process is suggested to predict reliability and lifetime of aeronautical hardware. An increment in values of diagnostic parameters is introduced to formulate then, using the characteristic function and after some rearrangements, the partial differential equation. An analytical dependence for the characteristic function of the aging process is a solution to this equation. With the inverse transformation applied, the density function of the aging of aeronautical hardware is found. Having found the density function, one can determine the aeronautical equipment’s reliability and lifetime. The in-service collected or the life tests delivered data are used to attain this goal. Coefficients in this relationship are found using the likelihood function.

An application of characteristic function in order to predict reliability and lifetime of aeronautical hardware

International Nuclear Information System (INIS)

Żurek, Józef; Kaleta, Ryszard; Zieja, Mariusz

2016-01-01

The forecasting of reliability and life of aeronautical hardware requires recognition of many and various destructive processes that deteriorate the health/maintenance status thereof. The aging of technical components of aircraft as an armament system proves of outstanding significance to reliability and safety of the whole system. The aging process is usually induced by many and various factors, just to mention mechanical, biological, climatic, or chemical ones. The aging is an irreversible process and considerably affects (i.e. reduces) reliability and lifetime of aeronautical equipment. Application of the characteristic function of the aging process is suggested to predict reliability and lifetime of aeronautical hardware. An increment in values of diagnostic parameters is introduced to formulate then, using the characteristic function and after some rearrangements, the partial differential equation. An analytical dependence for the characteristic function of the aging process is a solution to this equation. With the inverse transformation applied, the density function of the aging of aeronautical hardware is found. Having found the density function, one can determine the aeronautical equipment’s reliability and lifetime. The in-service collected or the life tests delivered data are used to attain this goal. Coefficients in this relationship are found using the likelihood function.

Evaluating CMA Equalization of SOQPSK-TG for Aeronautical Telemetry

Science.gov (United States)

2015-03-01

Program through the U.S. Army Program Executive Office for Simulation, Training and Instrumentation (PEO STRI) under contract W900KK-13-C-0026 ( PAQ ...Report: Preamble assisted equalization for aeronautical telemetry ( PAQ ),‖ Brigham Young University, Technical Report, 2014, submitted to the Spectrum

76 FR 40753 - NASA Advisory Council; Aeronautics Committee; Meeting

Science.gov (United States)

2011-07-11

..., Building 152, Dailey Road, NASA Research Park, NASA Ames Research Center (ARC), Moffett Field, CA 95035... Committee, National Aeronautics and Space Administration Headquarters, Washington, DC 20546, (202) 358-0566... Christensen, Protocol Specialist, Office of the Center Director, NASA ARC, Moffett Field, CA. For questions...

7 CFR 330.301 - Stone and quarry products from certain areas in Canada.

Science.gov (United States)

2010-01-01

... 7 Agriculture 5 2010-01-01 2010-01-01 false Stone and quarry products from certain areas in Canada... § 330.301 Stone and quarry products from certain areas in Canada. Stone and quarry products from areas in Canada infested with the gypsy moth may be moved from Canada into or through the United States...

14 CFR 23.1182 - Nacelle areas behind firewalls.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Nacelle areas behind firewalls. 23.1182... Powerplant Fire Protection § 23.1182 Nacelle areas behind firewalls. Components, lines, and fittings, except those subject to the provisions of § 23.1351(e), located behind the engine-compartment firewall must be...

Radiation Target Area Sample Environmental Chamber (RTASEC), Phase I

Data.gov (United States)

National Aeronautics and Space Administration — Payload Systems Inc. proposes the Radiation Target Area Sample Environmental Chamber (RTASEC) as an innovative approach enabling radiobiologists to investigate the...

The K-8 Aeronautics Internet Textbook

Science.gov (United States)

2002-01-01

Efforts were focused on web site migration, from UC (University of California) Davis to the National Business Aviation Association's (NBAA) web site. K8AIT (K-8 Aeronautics Internet Textbook), which has remained an unadvertised web site, receives almost two million hits per month. Project continuation funding with the National Business Aviation Association is being pursued. A Memorandum of Understanding (MOU) between NASA Ames LTP (Learning Technologies Project) and Cislunar has been drafted and approved by NASA's legal department. Additional web content on space flight and the Wright brothers has been added in English and Spanish.

Surface area and chemical reactivity characteristics of uranium metal corrosion products

International Nuclear Information System (INIS)

Totemeier, T. C.

1998-01-01

The results of an initial characterization of hydride-containing corrosion products from uranium metal Zero Power Physics Reactor (ZPPR) fuel plates are presented. Sorption analyses using the BET method with a Kr adsorbate were performed to measure the specific areas of corrosion product samples. The specific surface areas of the corrosion products varied from 0.66 to 1.01 m 2 /g. The reactivity of the products in Ar-9%O 2 and Ar-20%O 2 were measured at temperatures between 35 C and 150 C using a thermo-gravimetric analyzer. Ignition of the products occurred at temperatures of 150 C and above. The oxidation rates below ignition were comparable to rates observed for uranium metal

National Aeronautics and Space Administration Biological Specimen Repository

Science.gov (United States)

McMonigal, Kathleen A.; Pietrzyk, Robert a.; Johnson, Mary Anne

2008-01-01

The National Aeronautics and Space Administration Biological Specimen Repository (Repository) is a storage bank that is used to maintain biological specimens over extended periods of time and under well-controlled conditions. Samples from the International Space Station (ISS), including blood and urine, will be collected, processed and archived during the preflight, inflight and postflight phases of ISS missions. This investigation has been developed to archive biosamples for use as a resource for future space flight related research. The International Space Station (ISS) provides a platform to investigate the effects of microgravity on human physiology prior to lunar and exploration class missions. The storage of crewmember samples from many different ISS flights in a single repository will be a valuable resource with which researchers can study space flight related changes and investigate physiological markers. The development of the National Aeronautics and Space Administration Biological Specimen Repository will allow for the collection, processing, storage, maintenance, and ethical distribution of biosamples to meet goals of scientific and programmatic relevance to the space program. Archiving of the biosamples will provide future research opportunities including investigating patterns of physiological changes, analysis of components unknown at this time or analyses performed by new methodologies.

78 FR 64591 - Notice of Intent To Rule on Change in Use of Aeronautical Property at Bowman Field Airport...

Science.gov (United States)

2013-10-29

... Use of Aeronautical Property at Bowman Field Airport, Louisville, KY AGENCY: Federal Aviation... portion of airport property from aeronautical to non-aeronautical use at the Bowman Field Airport... under the provisions of Section 125 of the Wendell H. Ford Aviation Investment Reform Act for the 21st...

CDDIS_GNSS_products_erp

Data.gov (United States)

National Aeronautics and Space Administration — Earth Rotation Parameters (ERPs) derived from analysis of Global Navigation Satellite System (GNSS) data. These products are the generated by analysis centers in...

Development of a Comprehensive Digital Avionics Curriculum for the Aeronautical Engineer

National Research Council Canada - National Science Library

Hofer, Thomas W

2006-01-01

... avionics curriculum does not yet exist that satisfies the needs of graduates who will serve as aeronautical engineers involved with the development, integration, testing, fielding, and supporting...

Vegetable Production System (Veggie)

Data.gov (United States)

National Aeronautics and Space Administration — The Vegetable Production System (Veggie) was developed to be a simple, easily stowed, high growth volume, low resource facility capable of producing fresh vegetables...

Applied simulation and optimization : in logistics, industrial and aeronautical practice

NARCIS (Netherlands)

Mujica Mota, Miguel; De la Mota, Idalia Flores; Guimarans Serrano, Daniel

2015-01-01

Presenting techniques, case-studies and methodologies that combine the use of simulation approaches with optimization techniques for facing problems in manufacturing, logistics, or aeronautical problems, this book provides solutions to common industrial problems in several fields, which range from

Aeronautical Information Service–General Aviation Pilots interface in digital era

Directory of Open Access Journals (Sweden)

Roman Matyáš

2016-04-01

Full Text Available Modern technologies and portable devices are part of our everyday lives almost two decades. This article describes how Aeronautical Information Service providers in Central Europe utilize modern technologies in the communication interface with general aviation pilots.

Surface area and chemical reactivity characteristics of uranium metal corrosion products.

Energy Technology Data Exchange (ETDEWEB)

Totemeier, T. C.

1998-02-17

The results of an initial characterization of hydride-containing corrosion products from uranium metal Zero Power Physics Reactor (ZPPR) fuel plates are presented. Sorption analyses using the BET method with a Kr adsorbate were performed to measure the specific areas of corrosion product samples. The specific surface areas of the corrosion products varied from 0.66 to 1.01 m{sup 2}/g. The reactivity of the products in Ar-9%O{sub 2} and Ar-20%O{sub 2} were measured at temperatures between 35 C and 150 C using a thermo-gravimetric analyzer. Ignition of the products occurred at temperatures of 150 C and above. The oxidation rates below ignition were comparable to rates observed for uranium metal.

Dioxin/POPs legacy of pesticide production in Hamburg: part 1--securing of the production area.

Science.gov (United States)

Weber, Roland; Varbelow, Hans Gerhard

2013-04-01

α-Hexachlorocyclohexane (HCH), β-HCH, and γ-HCH (lindane) were recently included as new persistent organic pollutants (POPs) in the Stockholm Convention. Therefore, the chemicals need to be globally addressed, including the disposal of historic wastes. At most sites, the approximately 85% of HCH waste isomers were dumped. At a former lindane factory in Hamburg and some other factories the HCH, waste was recycled producing residues with high polychlorinated dibenzo-p-dioxin and dibenzofuran (PCDD/PCDF) levels. The soil and ground water under the former pesticide factory was/is highly contaminated with HCH (260 tons), chlorobenzenes (550 tons), and PCDD/PCDF (6 kg toxic equivalents (TEQ)). This contamination did not result from disposal operations but from spillages and leakages during the 30 years of the factory's production history. A containment wall has been constructed around the production area to prevent the dispersal of the pollutants. The ground water is managed by a pump and treat system. Over the last 15 years, approximately 10-30 tons of this pollution reservoir has been pumped and incinerated. For the contaminated production buildings, specific assessment and demolition technologies have been applied. In addition to their HCH waste isomer deposition, former lindane/HCH productions need to be assessed for possible recycling practice of HCH and related PCDD/PCDF contamination of the production area and buildings. Since such recycling activities have taken place at several factories in different countries, the experience of assessment and management of the described production area and contaminated buildings could be valuable. Such assessment could be addressed within the frame of the Stockholm Convention.

Validation of the MODIS Collection 6 MCD64 Global Burned Area Product

Science.gov (United States)

Boschetti, L.; Roy, D. P.; Giglio, L.; Stehman, S. V.; Humber, M. L.; Sathyachandran, S. K.; Zubkova, M.; Melchiorre, A.; Huang, H.; Huo, L. Z.

2017-12-01

The research, policy and management applications of satellite products place a high priority on rigorously assessing their accuracy. A number of NASA, ESA and EU funded global and continental burned area products have been developed using coarse spatial resolution satellite data, and have the potential to become part of a long-term fire Essential Climate Variable. These products have usually been validated by comparison with reference burned area maps derived by visual interpretation of Landsat or similar spatial resolution data selected on an ad hoc basis. More optimally, a design-based validation method should be adopted, characterized by the selection of reference data via probability sampling. Design based techniques have been used for annual land cover and land cover change product validation, but have not been widely used for burned area products, or for other products that are highly variable in time and space (e.g. snow, floods, other non-permanent phenomena). This has been due to the challenge of designing an appropriate sampling strategy, and to the cost and limited availability of independent reference data. This paper describes the validation procedure adopted for the latest Collection 6 version of the MODIS Global Burned Area product (MCD64, Giglio et al, 2009). We used a tri-dimensional sampling grid that allows for probability sampling of Landsat data in time and in space (Boschetti et al, 2016). To sample the globe in the spatial domain with non-overlapping sampling units, the Thiessen Scene Area (TSA) tessellation of the Landsat WRS path/rows is used. The TSA grid is then combined with the 16-day Landsat acquisition calendar to provide tri-dimensonal elements (voxels). This allows the implementation of a sampling design where not only the location but also the time interval of the reference data is explicitly drawn through stratified random sampling. The novel sampling approach was used for the selection of a reference dataset consisting of 700

Rock glaciers, Fletschhorn Area, Valais, Switzerland, Version 1

Data.gov (United States)

National Aeronautics and Space Administration — This data set contains a total amount of 74 rock glaciers which were investigated in the Fletschhorn Area in the southern Swiss Alps during the summer of 1995. The...

Graphene-Based Filters and Supercapacitors for Space and Aeronautical Applications

Science.gov (United States)

Calle, Carlos I.

2015-01-01

Overview of the capabilities of graphene for selective filters and for energy storage with a general description of the work being done at NASA Kennedy Space Center in collaboration with the University of California Los Angeles for space and aeronautical applications.

Ridge Regression: A tool to forecast wheat area and production

Directory of Open Access Journals (Sweden)

Nasir Jamal

2007-07-01

Full Text Available This research study is designed to develop forecasting models for acreage and production of wheat crop for Chakwal district of Rawalpindi region keeping in view the assumptions of OLS estimation. The forecasting models are developed on the basis of 15 years data from 1984-85 to 1998-99 then wheat area and production for next five years from 1999-2000 to 2003-04 is forecasted through the models and compared with the actual figures. After evaluating the accuracy of the models, final models are developed on the basis of 20 years data for the period 1984-85 to 2003-04. These linear models can be used to forecast wheat area and production of next five years. The Urea fertilizer, DAP fertilizer and manures plays a significant role to enhance the production of wheat crop. Number of ploughs in the wheat fields is significant factor to increase the production of wheat crop. Good rains in the month of October and November significantly contributes to increase the production of wheat crop and mean maximum temperature in the month of March is a significant factor to reduce the production of wheat crop.

MSAT wide-area fleet management: End-user requirements and applications

Science.gov (United States)

Pedersen, Allister

1995-01-01

MSAT (Mobile SATellite) Services will become a reality in North America in 1995. MSAT will provide wide-area voice, data and fax services to land, marine and aeronautical mobile users anywhere in North America including 200 nautical miles off the coasts and into the Arctic waters. MSAT will also convey GPS position information from mobiles to dispatch centers. One broad application of MSAT is Wide Area Fleet Management (WAFM). This paper defines WAFM, outlines end-user requirements and identifies potential applications of MSAT WAFM. The paper draws from information obtained in several preMSAT WAFM field trials in land, marine and aeronautical mobile environments. The paper concludes with an outline of the potential benefits of MSAT WAFM.

Solar energy and the aeronautics industry. Thesis

Science.gov (United States)

Benedek, L.

1985-01-01

An introduction to the physical aspects of solar energy, incidental energy and variations in solar flux is presented, along with an explanation of the physical principles of obtaining solar energy. The history of the application of solar energy to aeronautics, including the Gossamer Penguin and the Solar Challenger is given. Finally, an analysis of the possibilities of using a reaction motor with hybrid propulsion combining solar energy with traditional fuels as well as calculations of the proposed cycle and its mode of operation are given.

Factors affecting dairy production in peri-urban areas of Kampala

African Journals Online (AJOL)

demand for dairy products by the increasing urban population and the need to provide ... was therefore recommended that if milk production in the peri-urban areas of Kampala is to .... approximately 80% of the total labour use in dairy farming.

HANPP Collection: Human Appropriation of Net Primary Productivity (HANPP) by Country and Product

Data.gov (United States)

National Aeronautics and Space Administration — The Global Patterns in Human Appropriation of Net Primary Productivity (HANPP) portion of the HANPP Collection represents a digital map of human appropriation of net...

Poverty Mapping Project: Small Area Estimates of Poverty and Inequality

Data.gov (United States)

National Aeronautics and Space Administration — The Small Area Estimates of Poverty and Inequality dataset consists of consumption-based poverty, inequality and related measures for subnational administrative...

Air Breathing Propulsion Controls and Diagnostics Research at NASA Glenn Under NASA Aeronautics Research Mission Programs

Science.gov (United States)

Garg, Sanjay

2015-01-01

The Intelligent Control and Autonomy Branch (ICA) at NASA (National Aeronautics and Space Administration) Glenn Research Center (GRC) in Cleveland, Ohio, is leading and participating in various projects in partnership with other organizations within GRC and across NASA, the U.S. aerospace industry, and academia to develop advanced controls and health management technologies that will help meet the goals of the NASA Aeronautics Research Mission Directorate (ARMD) Programs. These efforts are primarily under the various projects under the Advanced Air Vehicles Program (AAVP), Airspace Operations and Safety Program (AOSP) and Transformative Aeronautics Concepts Program (TAC). The ICA Branch is focused on advancing the state-of-the-art of aero-engine control and diagnostics technologies to help improve aviation safety, increase efficiency, and enable operation with reduced emissions. This paper describes the various ICA research efforts under the NASA Aeronautics Research Mission Programs with a summary of motivation, background, technical approach, and recent accomplishments for each of the research tasks.

Interference Analysis for an Aeronautical Mobile Airport Communications System

Science.gov (United States)

Wilson, Jeffrey D.; Kerczewski, Robert J.

2011-01-01

The next generation of aeronautical communications for airport surface applications has been identified through a NASA research program and an international collaborative future communications study. The result, endorsed by both the United States and European regulatory agencies is called AeroMACS (Aeronautical Mobile Airport Communications System) and is based upon the IEEE 802.16e mobile wireless standard. Coordinated efforts to develop appropriate aviation standards for the AeroMACS system are now underway within RTCA (United States) and Eurocae (Europe). AeroMACS will be implemented in a recently allocated frequency band, 5091-5150 MHz. As this band is also occupied by fixed satellite service uplinks, AeroMACS must be designed to avoid interference with this incumbent service. The aspects of AeroMACS operation that present potential interference to the fixed satellite service are under analysis in order to enable the definition of standards that assure that such interference will be avoided. The NASA Glenn Research Center has been involved in this analysis, and the first results of modeling and simulation efforts directed at this analysis are the subject of this presentation.

National Aeronautics and Space Administration Fiscal Year 2001 Accountability Report

Science.gov (United States)

2002-01-01

The National Aeronautics and Space Administration (NASA) is an independent Agency established to plan and manage the future of the Nation's civil aeronautics and space program. This Accountability Report covers Federal Fiscal Year (FY) 2001 (October 1, 2000, through September 30, 2001), with discussion of some subsequent events. The Report contains an overview addressing the Agency's critical programs and financial performance and includes highlights of performance organized by goals and objectives of the Enterprises and Crosscutting Processes. The Report also summarizes NASA's stewardship over budget and financial resources, including audited financial statements and footnotes. The financial statements reflect an overall position of offices and activities, including assets and liabilities, as well as results of operations, pursuant to requirements of Federal law (31 U.S.C. 3515(b)). The auditor's opinions on NASA's financial statements, reports on internal controls, and compliance with laws and regulations are included in this report.

Production of iridium-alloy clad vent sets for the Cassini mission to Saturn

International Nuclear Information System (INIS)

Helle, K.J.; Moore, J.P.

1995-01-01

Martin Marietta Energy Systems, Inc., has successfully produced the iridium-alloy clad vent sets required for encapsulation of plutonia for the National Aeronautics and Space Administration Cassini mission to Saturn. Numerous improvements were made to the manufacturing process in various areas including dye-penetrant examination of cups, foil part stamping, chemical analysis, tungsten fixturing for laser welding, and enhanced inspections at high magnification. In addition, systems were initiated to ensure process control, and a detailed quality and technical surveillance program was prepared and followed to detect any incipient production problem early in the process so that corrective action could be taken immediately. The quality of the resulting iridium components has been high, and production yields have been above 90%. During the course of the production campaign for the Cassini mission, worker efficiencies lowered production costs, and further cost reductions are possible if operations are consolidated into a single area and bare-forming of the iridium alloys cups can be qualified for flight-quality clad vent sets

BOREAS TE-17 Production Efficiency Model Images

Data.gov (United States)

National Aeronautics and Space Administration — A BOREAS version of the Global Production Efficiency Model(www.inform.umd.edu/glopem) was developed by TE-17 to generate maps of gross and net primary production,...

Sustainable rice production in the Muda area of Malaysia

International Nuclear Information System (INIS)

Ho Nai Kin; Foong Kam Chong; Kamarudin Dahuli

2002-01-01

The Green Revolution has generated both positive as well as negative effects on the rice agroecosystem in the Muda area. The major obstacles to sustainable rice production are water shortage, natural hazards, disease epidemics, pest outbreaks, urban and industrial development, as well as structural changes in the farming community. The Muda Agricultural Development Authority (MADA) has adopted a proactive approach in addressing these problems. The improvement in management in the Muda area comprises the following strategies: i) Improvement in water use efficiency through intensification of tertiary irrigation systems, ii) Optimisation of drainage water utilisation through recycling, iii) Establishment of a Management Information System to support operational decisions, iv) Conservation of catchment vegetation for sustainable water resources, v) Implementation of Integrated Pest Management programmes, vi) Mobilisation of farmers in dynamic group activities, vii) Integration of farmers participatory experiments in the extension programmes. The above mentioned approaches have contributed to the attainment of high cropping intensity yield enhancement, and sustainability of rice production in the Muda area. (Author)

The Aeronautics Education, Research, and Industry Alliance (AERIAL) 2002 Report. UNO Aviation Monograph Series. UNOAI Report.

Science.gov (United States)

Bowen, Brent D.; Box, Richard C.; Fink, Mary M.; Gogos, George; Lehrer, Henry R.; Narayanan, Ram M.; Nickerson, Jocelyn S.; O'Neil, Patrick D.; Tarry, Scott E.; Vlasek, Karisa D.

This document contains four papers on aeronautics education, research, and partnerships that partly supported through the Aeronautics Education, Research, and Industry Alliance (AERIAL). The paper "2002 AERIAL Monograph" (Brent D. Bowen, Jocelyn S. Nickerson, Mary M. Fink, et al.) presents an overview of research and development in the…

75 FR 54221 - Government/Industry Aeronautical Charting Forum Meeting

Science.gov (United States)

2010-09-03

... Aeronautical Navigation Services (AeroNav Services) Group, Regulatory Support and Coordination Team, AJW-372...: The ACF is separated into two distinct groups. The Instrument Procedures Group (IPG) will meet October 26, 2010 from 8:30 a.m. to 5 p.m. The Charting Group will meet October 27 and 28, 2010 from 8:30 a.m...

Global mobile satellite communications theory for maritime, land and aeronautical applications

CERN Document Server

Ilčev, Stojče Dimov

2017-01-01

This book discusses current theory regarding global mobile satellite communications (GMSC) for maritime, land (road and rail), and aeronautical applications. It covers how these can enable connections between moving objects such as ships, road and rail vehicles and aircrafts on one hand, and on the other ground telecommunications subscribers through the medium of communications satellites, ground earth stations, Terrestrial Telecommunication Networks (TTN), Internet Service Providers (ISP) and other wireless and landline telecommunications providers. This new edition covers new developments and initiatives that have resulted in land and aeronautical applications and the introduction of new satellite constellations in non-geostationary orbits and projects of new hybrid satellite constellations. The book presents current GMSC trends, mobile system concepts and network architecture using a simple mode of style with understandable technical information, characteristics, graphics, illustrations and mathematics equ...

CO2 and temperature effects on leaf area production in two annual plant species

International Nuclear Information System (INIS)

Ackerly, D.D.; Coleman, J.S.; Morse, S.R.; Bazzaz, F.A.

1992-01-01

The authors studied leaf area production in two annual plant species, Abutilon theophrasti and Amaranthus retroflexus, under three day/night temperature regimes and two concentrations of carbon dioxide. The production of whole-plant leaf area during the first 30 d of growth was analyzed in terms of the leaf initiation rate, leaf expansion, individual leaf area, and, in Amaranthus, production of branch leaves. Temperature and CO 2 influenced leaf area production through effects on the rate of development, determined by the production of nodes on the main stem, and through shifts in the relationship between whole-plant leaf area and the number of main stem nodes. In Abutilon, leaf initiation rate was highest at 38 degree, but area of individual leaves was greatest at 28 degree. Total leaf area was greatly reduced at 18 degree due to slow leaf initiation rates. Elevated CO 2 concentration increased leaf initiation rate at 28 degree, resulting in an increase in whole-part leaf area. In Amaranthus, leaf initiation rate increased with temperature, and was increased by elevated CO 2 at 28 degree. Individual leaf area was greatest at 28 degree, and was increased by elevated CO 2 at 28 degree but decreased at 38 degree. Branch leaf area displayed a similar response to CO 2 , butt was greater at 38 degree. Overall, wholeplant leaf area was slightly increased at 38 degree relative to 28 degree, and elevated CO 2 levels resulted in increased leaf area at 28 degree but decreased leaf area at 38 degree

Aeronautical Cast Ti Alloy and Forming Technology Development

OpenAIRE

ZHANG Meijuan; NAN Hai; JU Zhongqiang; GAO Fuhui; QIE Xiwang; ZHU Langping

2016-01-01

The application and feature of Ti alloy and TiAl alloy for aviation at home and abroad were briefly introduced. According to the patent application status in Ti alloy field, the development of Ti alloy casting technology was analyzed in the recent thirty years, especially the transformation in aviation. Along with the development of aeronautional manufacturing technology and demand of high performance aircraft, Ti alloy casting is changing towards to be large, integral and complicated, and th...

Mycobiota in the processing areas of two different meat products

DEFF Research Database (Denmark)

Sørensen, Louise Marie; Jacobsen, Tomas; Nielsen, Per Væggemose

2008-01-01

processing plants and was in addition found on moulded meat products. Sixteen Penicillium species were identified. The most frequently isolated were P. brevicompactum and the closely related P. bialowiezense, P. solitum, P. palitans, P. fagi and a new, not described species named P. “milanense” (ined......Mould growth is not accepted on most types of North European meat products and is considered as both an economic and aesthetic problem for the producers. In order to determine the mycobiota in processing areas of fermented sausage and liver pâté, filamentous fungi were isolated from air, equipment.......; Frisvad, 2007 personal com.). Isolation of a new species illustrates that the mycobiota in the processing areas of North European meat products has not yet been intensively investigated. Several mycotoxin producing species were isolated; the most prevalent were P. brevicompactum/P. bialowiezense and P...

A Fire Detector for Monitoring Inaccessible Areas in Aircrafts, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — En'Urga Inc. will evaluate the feasibility of utilizing reflected, multi-wavelength, near infrared radiation for detecting fires in inaccessible areas within...

New Products and Technologies, Based on Calculations Developed Areas

Directory of Open Access Journals (Sweden)

Gheorghe Vertan

2013-09-01

Full Text Available Following statistics, currently prosperous and have high GDP / capita, only countries that have and fructify intensively large natural resources and/or produce and export products massive based on patented inventions accordingly. Without great natural wealth and the lowest GDP / capita in the EU, Romania will prosper only with such products. Starting from the top experience in the country, some patented, can develop new and competitive technologies and patentable and exportable products, based on exact calculations of developed areas, such as that double shells welded assemblies and plating of ships' propellers and blade pump and hydraulic turbines.

Factors Affecting Innovation Within Aeronautical Systems Center (ASC) Organizations - An inductive Study

National Research Council Canada - National Science Library

Feil, Eric

2003-01-01

.... This thesis analyzed data collected during the 2002 Chief of Staff of the Air Force Organizational Climate Survey to identify factors that affect innovation within Aeronautical Systems Center (ASC) organizations...

Aeronautics Education, Research, and Industry Alliance (AERIAL) Progress Report and Proposal for Funding Continuation NASA Nebraska EPSCoR

Science.gov (United States)

Bowen, Brent; Fink, Mary; Gogos, George; Moussavi, Massoum; Nickerson, Jocelyn; Rundquist, Donald; Russell, Valerie; Tarry, Scott

2004-01-01

The Aeronautics Education, Research, and Industry Alliance (AERIAL), which began as a comprehensive, multi-faceted NASA EPSCoR 2000 initiative, has contributed substantially to the strategic research and technology priorities of NASA, while intensifying Nebraska's rapidly growing aeronautics research and development endeavors. AERIAL has enabled Nebraska researchers to: (a) continue strengthening their collaborative relationships with NASA Field Centers, Codes, and Enterprises; (b) increase the capacity of higher education throughout Nebraska to invigorate and expand aeronautics research; and (c) expedite the development of aeronautics-related research infrastructure and industry in the state. Nebraska has placed emphasis on successfully securing additional funds from non-EPSCoR and non-NASA sources. AERIAL researchers have aggressively pursued additional funding opportunities offered by NASA, industry, and other agencies. This report contains a summary of AERIAL's activities and accomplishments during its first three years of implementation.

HANPP Collection: Global Patterns in Net Primary Productivity (NPP)

Data.gov (United States)

National Aeronautics and Space Administration — The Global Patterns in Net Primary Productivity (NPP) portion of the Human Appropriation of Net Primary Productivity (HANPP) Collection maps the net amount of solar...

TRMM Precipitation Radar (PR) Gridded Rainfall Product (TRMM Product 3A25) V6

Data.gov (United States)

National Aeronautics and Space Administration — The primary objective of algorithm 3A25 is to compute various rainfall statistics over a month from the level 2 PR products. The statistics are derived at two...

TRMM Precipitation Radar (PR) Gridded Rainfall Product (TRMM Product 3A25) V7

Data.gov (United States)

National Aeronautics and Space Administration — The primary objective of algorithm 3A25 is to compute various rainfall statistics over a month from the level 2 PR products. The statistics are derived at two...

Low-Power Large-Area Radiation Detector for Space Science Measurements

Data.gov (United States)

National Aeronautics and Space Administration — The objective of this task is to develop a low-power, large-area detectors from SiC, taking advantage of very low thermal noise characteristics and high radiation...

CMS: Estimated Deforested Area Biomass, Tropical America, Africa, and Asia, 2000

Data.gov (United States)

National Aeronautics and Space Administration — This data set provides estimates of pre-deforestation aboveground live woody biomass (AGLB) at 30-m resolution for deforested areas of tropical America, tropical...

PEMFC for aeronautic applications: A review on the durability aspects

Science.gov (United States)

Dyantyi, Noluntu; Parsons, Adrian; Sita, Cordellia; Pasupathi, Sivakumar

2017-11-01

Proton exchange membrane fuel cells (PEMFC) not only offer more efficient electrical energy conversion, relative to on-ground/backup turbines but generate by-products useful in aircraft such as heat for ice prevention, deoxygenated air for fire retardation and drinkable water for use on-board. Consequently, several projects (e.g. DLR-H2 Antares and RAPID2000) have successfully tested PEMFC-powered auxiliary unit (APU) for manned/unmanned aircraft. Despite the progress from flying PEMFC-powered small aircraft with 20 kW power output as high as 1 000 m at 100 km/h to 33 kW at 2 558 m, 176 km/h [1, 2, 3], durability and reliability remain key challenges. This review reports on the inadequate understanding of behaviour of PEMFC under aeronautic conditions and the lack of predictive methods conducive for aircraft that provide real-time information on the State of Health of PEMFCs. -To minimize performance loss due to high altitude and inclination by adjusting cathode stoichiometric ratio. -To improve quality of oxygen-depleted air by controlling operating temperature and stoichiometric ratio. -Need to devise real time prediction methods conducive for determining PEMFC SoH in aircraft.

Design of a pneumatic system for the development of skills among aeronautics maintenance technology students

OpenAIRE

Calderón Pérez, Jorge Luis; Cruz Rico, Oliver; Ospina Martínez, Darwin

2016-01-01

Introduction: This article is the result of the “Design and installation of a pneumatic system for Aeronautics Maintenance Technology students’ instruction (TMA)”. The research was conducted during 2014 and 2015 by the Police Aviation School research group (esavi), attached to the National Directorate of Schools (DINAE). Methodology: design and construction of a lab with a pneumatic system for handling aviation materials and structures by the Aeronautics Maintenance Technology students. The p...

14 CFR 61.309 - What aeronautical knowledge must I have to apply for a sport pilot certificate?

Science.gov (United States)

2010-01-01

... apply for a sport pilot certificate? 61.309 Section 61.309 Aeronautics and Space FEDERAL AVIATION... GROUND INSTRUCTORS Sport Pilots § 61.309 What aeronautical knowledge must I have to apply for a sport pilot certificate? Except as specified in § 61.329, to apply for a sport pilot certificate you must...

Analysis, improvement and application of the MODIS leaf area index products

Science.gov (United States)

Yang, Wenze

Green leaf area governs the exchanges of energy, mass and momentum between the Earth's surface and the atmosphere. Therefore, leaf area index (LAI) and fraction of incident photosynthetically active radiation (0.4-0.7 mum) absorbed by the vegetation canopy (FPAR) are widely used in vegetation monitoring and modeling. The launch of Terra and Aqua satellites with the moderate resolution imaging spectroradiometer (MODIS) instrument onboard provided the first global products of LAI and FPAR, derived mainly from an algorithm based on radiative transfer. The objective of this research is to comprehensively evaluate the Terra and Aqua MODIS LAI/FPAR products. Large volumes of these products have been analyzed with the goal of understanding product quality with respect to version (Collection 3 versus 4), algorithm (main versus back-up), snow (snow-free versus snow on the ground) and cloud (cloud-free versus cloudy) conditions. Field validation efforts identified several key factors that influence the accuracy of algorithm retrievals. The strategy of validation efforts guiding algorithm refinements has led to progressively more accurate LAI/FPAR products. The combination of products derived from the Terra and Aqua MODIS sensors increases the success rate of the main radiative transfer algorithm by 10-20 percent over woody vegetation. The Terra Collection 4 LAI data reveal seasonal swings in green leaf area of about 25 percent in a majority of the Amazon rainforests caused by variability in cloud cover and light. The timing and the influence of this seasonal cycle are critical to understanding tropical plant adaptation patterns and ecological processes. The results presented in this dissertation suggest how the product quality has gradually improved largely through the efforts of validation activities. The Amazon case study highlights the utility of these data sets for monitoring global vegetation dynamics. Thus, these results can be seen as a benchmark for evaluation of

ISLSCP II Leaf Area Index (LAI) from Field Measurements, 1932-2000

Data.gov (United States)

National Aeronautics and Space Administration — ABSTRACT: Leaf Area Index (LAI) data from the scientific literature, covering the period from 1932-2000, have been compiled at the Oak Ridge National Laboratory...

F-15 Intelligent Flight Control System and Aeronautics Research at NASA Dryden

Science.gov (United States)

Brown, Nelson A.

2009-01-01

This viewgraph presentation reviews the F-15 Intelligent Flight Control System and Aeronautics including Autonomous Aerial Refueling Demonstrations, X-48B Blended Wing Body, F-15 Quiet Spike, and NF-15 Intelligent Flight Controls.

Production and use of the pastures of the Colombia high Andean areas

International Nuclear Information System (INIS)

Lotero Cadavid, J.

1993-01-01

A relationship of the most common pastures is made in the Andean high area between the 2000 and 3000 m.s.n.m. and of their native vegetable associations, as well as of the invaders plants and overgrowths. The gramineae germoplasm and leguminous is indicated that has been proven lower those conditions. Data of yield average of dry matter are presented for native and introduced grasses of cold climate in Colombia. Equally it is indicated the daily earnings by animal, the load capacity and the animal production with different fertilization systems and some parameters of productivity are shown of gramineous and leguminous introduced in the high areas of Colombia. The nutritious value of gramineous and leguminous of cold climate and its chemical composition are made. A description is made of the ecological areas of the Andean high area and the pastures types that prevail in them. The factors are described that they impact in the degree of deterioration of the pastures like the environment, the same grass, the handling, the livestock, the type of exploitation, the holding of the earth and the administration. The agricultural production systems are mentioned that are associate the Andean pastures, as well as the main obstacles to increase the production of the systems and pastures and their possible solutions

Embry-Riddle Aeronautical University multispectral sensor and data fusion laboratory: a model for distributed research and education

Science.gov (United States)

McMullen, Sonya A. H.; Henderson, Troy; Ison, David

2017-05-01

The miniaturization of unmanned systems and spacecraft, as well as computing and sensor technologies, has opened new opportunities in the areas of remote sensing and multi-sensor data fusion for a variety of applications. Remote sensing and data fusion historically have been the purview of large government organizations, such as the Department of Defense (DoD), National Aeronautics and Space Administration (NASA), and National Geospatial-Intelligence Agency (NGA) due to the high cost and complexity of developing, fielding, and operating such systems. However, miniaturized computers with high capacity processing capabilities, small and affordable sensors, and emerging, commercially available platforms such as UAS and CubeSats to carry such sensors, have allowed for a vast range of novel applications. In order to leverage these developments, Embry-Riddle Aeronautical University (ERAU) has developed an advanced sensor and data fusion laboratory to research component capabilities and their employment on a wide-range of autonomous, robotic, and transportation systems. This lab is unique in several ways, for example, it provides a traditional campus laboratory for students and faculty to model and test sensors in a range of scenarios, process multi-sensor data sets (both simulated and experimental), and analyze results. Moreover, such allows for "virtual" modeling, testing, and teaching capability reaching beyond the physical confines of the facility for use among ERAU Worldwide students and faculty located around the globe. Although other institutions such as Georgia Institute of Technology, Lockheed Martin, University of Dayton, and University of Central Florida have optical sensor laboratories, the ERAU virtual concept is the first such lab to expand to multispectral sensors and data fusion, while focusing on the data collection and data products and not on the manufacturing aspect. Further, the initiative is a unique effort among Embry-Riddle faculty to develop multi

Strategy For A/M Area Production Wells

International Nuclear Information System (INIS)

Jackson, D.G.; Looney, B.B.; Bergren, C.L.; Wells, D.G.; Beavers, B.A.

1996-01-01

Savannah River Site personnel are planning a two phase program in order to significantly reduce the amount of dissolved chlorinated solvents that are being transported to the McQueen branch Aquifer via the wellbore and gravel pack zones of the A/M Area production well system. In Phase I of the program a commercially available inflatable packer and check valve assembly will be installed inside the casing at the altitude of the McQueen Branch Confining Unit. This immediate, short term solution will eliminate the majority of the contaminant mass that is moving downward through the wellbore of the A/M Area production wells. During the packer installation process several pre- and post- testing activities are planned to aid SRS investigators in understanding the dynamics of the flow conditions and effectiveness of the installed assembly.The second phase of the program will address the small amount of contaminant mass that is moving downward through the continuous gravel pack of the production wells. The investigative data obtained during Phase I of this program will be beneficial for developing plans and appropriate actions for the Phase II activities.In addressing potential remediation actions for the dissolved solvents in the Cretaceous sediments, due to the limited vertical extent of the plume and the size, any remediation program should incorporate carefully located wells screened vertically within the plume trajectory.This optimizing approach will minimize water treatment and pumping costs and maximize the amount of contaminant removal. Flow and contaminant transport modeling scenarios are currently being developed to address the Cretaceous sediments. These efforts involve incorporating the available characterization data and the results of previous modeling work to more precisely define the extent and magnitude of this plume. SRS proposes incorporating depth discrete sampling during any future characterization effort to optimize any proposed remediation system

Effect of confinement area on production, physiological parameters ...

African Journals Online (AJOL)

Cows in the small camp stood for longer periods (P < 0.01) to avoid lying down in wet areas. Cows in the large camp spent more time (P < 0.01) lying down. Although no diff-erence in production para-. ;::.r^. *^ observed in both trials, an earthen mound and camps of at least 100 m2lcow may be necessary in high rainlall.

Effect of confinement area on production, physiological parameters ...

African Journals Online (AJOL)

Cows in the small camp stood for longer periods (P < 0.01) to avoid lying down in wet areas. Cows in the large camp spent more time (P < 0.01) lying down. Although no difference in production parameters was observed in both trials, an earthen mound and camps of at least 100 m2/cow may be necessaryin high rainfall ...

Do dose area product meter measurements reflect radiation doses ...

African Journals Online (AJOL)

Enrique

SA JOURNAL OF RADIOLOGY • August 2004. Abstract. This study determined the correlation between radiation doses absorbed by health care workers and dose area product meter (DAP) measurements at Universitas Hospital, Bloemfontein. The DAP is an instrument which accurately measures the radiation emitted from ...

Do dose area product meter measurements reflect radiation doses ...

African Journals Online (AJOL)

This study determined the correlation between radiation doses absorbed by health care workers and dose area product meter (DAP) measurements at Universitas Hospital, Bloemfontein. The DAP is an instrument which accurately measures the radiation emitted from the source. The study included the interventional ...

Environmental risk of oil production in sensitive areas[Pollution abatement in Norway

Energy Technology Data Exchange (ETDEWEB)

Dahle, Salve; Larsen, Lars-Henrik

2006-07-01

The presentation discusses sensitive areas in the Arctic regions with focus on the north of Norway and the Barents Sea. Various ecosystem problems related to oil and gas production are pointed out. Characteristics of particularly sensitive areas are mentioned and some examples of vulnerable areas are discussed (tk)

Production of Synthetic Lunar Simulants, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — Zybek Advanced Products has proven the ability to produce industrial quantities of lunar simulant materials, including glass, agglutinate and melt breccias. These...

EFFECTS OF RICIAN FADING ON THE OPERATION OF AERONAUTICAL SATELLITE OFDM CHANNEL

Directory of Open Access Journals (Sweden)

Volodymyr Kharchenko

2016-06-01

Full Text Available The aim of this study is to investigate the influence of Rician fading on messages transmission via the aeronautical satellite OFDM channel with adaptive modulation and the development of a method for estimating the parameters of such a channel. Methods: To study the effect of Rician fading on messages transmission via aeronautical satellite OFDM channel with adaptive modulation the original model of the communication channel “Aircraft-Satellite-Ground Station” was built using software package MATLAB Sіmulіnk. The model includes “Aircraft Transmitter”, “Uplink/Downlink Path”, “Satellite Transponder”, and “Ground Station Receiver”. Each modulator block in the modulation bank performs convolutional coding and puncturing using code rates of ½, ²/3, and ¾, data interleaving, BPSK, QPSK, 16-QAM, and 64-QAM modulation. Results: Dependences of Estimated channel SNR on the ratio between the power of the LOS component and the diffuse component, on the downlink gain and delay in the diffuse component for different Doppler spectrum types and Doppler frequency offsets were obtained. A method for estimating the parameters of the satellite channels with fading was proposed. Discussion: The realistic model of aeronautical satellite OFDM link with Rician fading is developed for the first time on a basis of IEEE 802.11a standard and used for channel parameters evaluation. Proposed in this article approach can be considered as a method for estimating parameters of the channel with fading.

LBA-ECO LC-01 Topographic Data for Intensive Study Areas, Northern Ecuadorian Amazon

Data.gov (United States)

National Aeronautics and Space Administration — ABSTRACT: This data set contains topographic/geomorphological data associated with the four Intensive Study Areas (ISAs) in the Northern Ecuadorian Amazon (northern...

LBA-ECO LC-01 Topographic Data for Intensive Study Areas, Northern Ecuadorian Amazon

Data.gov (United States)

National Aeronautics and Space Administration — This data set contains topographic/geomorphological data associated with the four Intensive Study Areas (ISAs) in the Northern Ecuadorian Amazon (northern Oriente)...

Swamp Rice Production in Ogun Waterside Local Government Area ...

African Journals Online (AJOL)

This study examined the economics of swamp rice production among peasant farmers in the Waterside Local Government Area of Ogun State for 2001 cropping year. A total of 50 swamp rice farmers were randomly selected from 5 villages using multistage sampling technique. The data collected, with the aid of ...

SAFARI 2000 1-Degree Estimates of Burned Biomass, Area, and Emissions, 2000

Data.gov (United States)

National Aeronautics and Space Administration — A new method is used to generate spatial estimates of monthly averaged biomass burned area and spatial and temporal estimates of trace gas and aerosol emissions from...

MODIS Collection 6 Land Product Subsets Web Service

Data.gov (United States)

National Aeronautics and Space Administration — The MODIS Web Service provides data access capabilities for Moderate Resolution Imaging Spectroradiometer (MODIS) Collection 6 land products. The web service...

Study of anisotropic mechanical properties for aeronautical PMMA

Directory of Open Access Journals (Sweden)

Wei Shang

Full Text Available For the properties of polymer are relative to its structure, the main purpose of the present work is to investigate the mechanical properties of the aeronautical PMMA which has been treated by the directional tensile technology. Isodyne images reveal the stress state in directional PMMA. And then, an anisotropic mechanical model is established. Furthermore, all mechanical parameters are measured by the digital image correlation method. Finally, based on the anisotropic mechanical model and mechanical parameters, the FEM numerical simulation and experimental methods are applied to analyze the fracture mechanical properties along different directions.

Robust Timing Synchronization in Aeronautical Mobile Communication Systems

Science.gov (United States)

Xiong, Fu-Qin; Pinchak, Stanley

2004-01-01

This work details a study of robust synchronization schemes suitable for satellite to mobile aeronautical applications. A new scheme, the Modified Sliding Window Synchronizer (MSWS), is devised and compared with existing schemes, including the traditional Early-Late Gate Synchronizer (ELGS), the Gardner Zero-Crossing Detector (GZCD), and the Sliding Window Synchronizer (SWS). Performance of the synchronization schemes is evaluated by a set of metrics that indicate performance in digital communications systems. The metrics are convergence time, mean square phase error (or root mean-square phase error), lowest SNR for locking, initial frequency offset performance, midstream frequency offset performance, and system complexity. The performance of the synchronizers is evaluated by means of Matlab simulation models. A simulation platform is devised to model the satellite to mobile aeronautical channel, consisting of a Quadrature Phase Shift Keying modulator, an additive white Gaussian noise channel, and a demodulator front end. Simulation results show that the MSWS provides the most robust performance at the cost of system complexity. The GZCD provides a good tradeoff between robustness and system complexity for communication systems that require high symbol rates or low overall system costs. The ELGS has a high system complexity despite its average performance. Overall, the SWS, originally designed for multi-carrier systems, performs very poorly in single-carrier communications systems. Table 5.1 in Section 5 provides a ranking of each of the synchronization schemes in terms of the metrics set forth in Section 4.1. Details of comparison are given in Section 5. Based on the results presented in Table 5, it is safe to say that the most robust synchronization scheme examined in this work is the high-sample-rate Modified Sliding Window Synchronizer. A close second is its low-sample-rate cousin. The tradeoff between complexity and lowest mean-square phase error determines

Research on the Governance Mechanism of Aviation Complex Product Manufacturing Supply Chain Based on Dynamic Game Theory

Directory of Open Access Journals (Sweden)

Wang Nan

2016-01-01

Full Text Available In the manufacturing process of aeronautical complex products, for the following problems: develop long production cycle, a large number of ancillary products, a plurality of participating units, etc, and the status of the frequency of quality problems, using single-phase static game model in the case of asymmetric information, study on Supplier Quality insufficient investment, which resulting in opportunistic behaviour reasons. And using KMRW dynamic game model, we quantitative analysis the mechanism and crucial role of reputation mechanisms to ensure aeronautical complex product manufacturing supply chain and effective operation.

Global Navigation Satellite System (GNSS) Rapid Clock Product Summary from NASA CDDIS

Data.gov (United States)

National Aeronautics and Space Administration — This derived product set consists of Global Navigation Satellite System Rapid Clock Product Summary from the NASA Crustal Dynamics Data Information System (CDDIS)....

Exposure and roentgen-area-product in xeromammography and conventional mammography

Energy Technology Data Exchange (ETDEWEB)

Baxt, J H; Bushong, S C; Glaze, S; Kothari, S [Baylor Univ., Houston, Tex. (USA). Coll. of Medicine

1976-01-01

X-ray mammography is assuming increasing importance in the early detection of breast cancer. The principal disadvantage to conventional mammography is high patient dose. Xeromammography offers three advantages over conventional mammography: (a) lower patient dose, (b) better image quality and (c) no special mammography tube required. A transmission ionization chamber and thermoluminescent dosimeters were used to measure the roentgen-area-product and the exposure for three view examination. Average roentgen-area-product values of 6500 and 4200 R-cm/sup 2/ were observed for conventional mammography and xeromammography respectively. The medial surface of the breast received the highest radiation exposure for both types of examinations and this was shown to be 11.5 and 5.1 R respectively. Omission of the axillary view from the examination reduces the patient dose in both types by approximately 60 %.

Large Area Diamond Tribological Surfaces with Negligible Wear in Extreme Environments, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — In Phase I we propose to demonstrate the processing of very large area diamond sliding bearings and tribological surfaces. The bearings and surfaces will experience...

ERP IN THE PRODUCTION AREA: USER’S OPINIONS ABOUT

Directory of Open Access Journals (Sweden)

Andre Luiz Pestana de Oliveira

2010-01-01

Full Text Available The study verified the production area’s key user opinions about needs being met by ERPthrough a survey conducted within industries from the State of São Paulo. The survey instrumentis composed of 28 activities related to the production area, using the literature review onproduction management and ERP as a basis. Also, four dimensions for production activities weredefined: Inventory Management Policies, Forecasts, MRP and MRP II. Activities were evaluatedaccording to five different criteria: Needs Being Met, Ease of Use, Parameterization,Customization and Training. The questionnaire was answered by managers from 46 industries,composing a non-probabilistic sample with an accessibility criterion. The research isexploratory. The analysis of the obtained data broadly showed that ERPs meet the expectationsof production managers. However, its most noteworthy aspect is the high number of activitiesthat are not used by companies. It was noted that the higher the number of used activities, thehigher the level of perception of needs being met.

14C specific activity of farm products and marine products collected from the Rokkasho area in Aomori prefecture

International Nuclear Information System (INIS)

Muranaka, Takeshi; Honda, Kazuya

1996-01-01

We investigated 14 C specific activity of farm products and marine products which were collected from the Rokkasho area in Aomori prefecture from 1988 to 1990. The measured 14 C specific activity of farm products was almost equal to one another with the averaged 14 C specific activity of 0.261 [Bq/g·C]. On the other hand, 14 C specific activity of marine products was slightly lower than those of farm products. Especially that of squid was the lowest among studied marine products. This may be due to the low 14 C specific activity of the sea water surrounding squid. (author)

Western aeronautical test range real-time graphics software package MAGIC

Science.gov (United States)

Malone, Jacqueline C.; Moore, Archie L.

1988-01-01

The master graphics interactive console (MAGIC) software package used on the Western Aeronautical Test Range (WATR) of the NASA Ames Research Center is described. MAGIC is a resident real-time research tool available to flight researchers-scientists in the NASA mission control centers of the WATR at the Dryden Flight Research Facility at Edwards, California. The hardware configuration and capabilities of the real-time software package are also discussed.

Evaluation of the external costs of energy production in the Helsinki metropolitan area

International Nuclear Information System (INIS)

Otterstroem, T.

1995-01-01

The aim of the research is to evaluate the external costs of energy production at Helsinki metropolitan area (Helsinki, Espoo, Vantaa). The previously developed valorization method for effects on population centres is adjusted. All the main health, material and environmental effects will be taken into account in the research. The effects of emissions of the energy production of the Helsinki metropolitan area on concentrations of the impurities in the air and through them on human and environment will be evaluated. The estimates will be based on the relativistic fuels consumption and the emission data of Helsinki metropolitan area. Life-cycle reasoning will be applied so that the emissions of the main components of the fuels used in the metropolitan area will be included in the estimation. The cost-effectiveness of the investments will be estimated by comparing the environmental investments of energy boards with the external costs. The methods of this work can be applied to estimation of the profitability of energy production plants from the point of view of national economy also elsewhere in the country

FY11 Facility Assessment Study for Aeronautics Test Program

Science.gov (United States)

Loboda, John A.; Sydnor, George H.

2013-01-01

This paper presents the approach and results for the Aeronautics Test Program (ATP) FY11 Facility Assessment Project. ATP commissioned assessments in FY07 and FY11 to aid in the understanding of the current condition and reliability of its facilities and their ability to meet current and future (five year horizon) test requirements. The principle output of the assessment was a database of facility unique, prioritized investments projects with budgetary cost estimates. This database was also used to identify trends for the condition of facility systems.

SAFARI 2000 Leaf Area Measurements at the Mongu Tower Site, Zambia, 2000-2002

Data.gov (United States)

National Aeronautics and Space Administration — ABSTRACT: Data from the LAI-2000 instrument were processed to determine the leaf area index (LAI) at the EOS Validation Core Site in Kataba Local Forest,...

Socio-economic impacts of charcoal production in Oke-Ogun area of Oyo State, Nigeria

Directory of Open Access Journals (Sweden)

Olasimbo Olarinde

2018-04-01

Full Text Available Many households in developing countries experience low energy consumption and this make them depend upon wood fuels for their energy. This study examined socio-economic impacts of charcoal production in Oke-Ogun, Oyo State, Nigeria. Two Local Government Areas were selected based on the accessibility and the availability of charcoal farmers among ten Local Government Areas. Results show that 74% of the respondents were male while 26% were female that are into production of charcoal in the study area. 37.5% of the age range (41–50 of respondent produces more charcoal than other age range. The respondent did not go beyond primary school educationally and they are all married. However, respondents with over 11–20 years of experience in the production of charcoal have higher percentage of frequency. Some of the problem faced by the producers of charcoal in Oke Ogun area are scarcity of trees, wildfire, government disturbance and transportation. Trees commonly used for production are from inherited farms and most of the trees used are Butyrosopermum paradoxium, Dialium guineense, Terminalia glaucencens, Khaya ivorensis. Production is once in a month and later exported. Energy provision is a basic human need and consumption is closely related to the level of a country’s development.

A Flexible System for Simulating Aeronautical Telecommunication Network

Science.gov (United States)

Maly, Kurt; Overstreet, C. M.; Andey, R.

1998-01-01

At Old Dominion University, we have built Aeronautical Telecommunication Network (ATN) Simulator with NASA being the fund provider. It provides a means to evaluate the impact of modified router scheduling algorithms on the network efficiency, to perform capacity studies on various network topologies and to monitor and study various aspects of ATN through graphical user interface (GUI). In this paper we describe briefly about the proposed ATN model and our abstraction of this model. Later we describe our simulator architecture highlighting some of the design specifications, scheduling algorithms and user interface. At the end, we have provided the results of performance studies on this simulator.

High Surface Area Iridium Anodes and Melt Containers for Molten Oxide Electrolysis, Phase II

Data.gov (United States)

National Aeronautics and Space Administration — Direct electrochemical reduction of molten regolith is the most attractive method of oxygen production on the lunar surface, because no additional chemical reagents...

Productivity of Premodern Agriculture in the Cucuteni-Trypillia Area.

Science.gov (United States)

Shukurov, Anvar; Sarson, Graeme; Videiko, Mykhailo; Henderson, Kate; Shiel, Robert; Dolukhanov, Pavel; Pashkevich, Galina

2015-07-01

We present paleoeconomy reconstructions for premodern agriculture, selecting, wherever required, features and parameter values specific for the Cucuteni-Trypillia cultural unity (CTU; 5,400-2,700 BC, mostly the territory of modern Ukraine, Moldova, and Romania). We verify the self-consistency and viability of the archaeological evidence related to all major elements of the agricultural production cycle within the constraints provided by environmental and technological considerations. The starting point of our analysis is the paleodiet structure suggested by archaeological data, stable isotope analyses of human remains, and palynology studies in the CTU area. We allow for the archeologically attested contributions of domesticated and wild animal products to the diet, develop plausible estimates of the yield of ancient cereal varieties cultivated with ancient techniques, and quantify the yield dependence on the time after initial planting and on rainfall (as a climate proxy). Our conclusions involve analysis of the labor costs of various seasonal parts of the agricultural cycle of both an individual and a family with a majority of members that do not engage in productive activities that require physical fitness, such as tillage. Finally, we put our results into the context of the exploitation territory and catchment analysis, to project various subsistence strategies into the exploitation territory of a farming settlement. The simplest economic complex based on cereals and domestic and wild animal products, with fallow cropping, appears to be capable of supporting an isolated, relatively small farming settlement of 50-300 people (2-10 ha in area) even without recourse to technological improvements such as the use of manure fertilizer. Our results strongly suggest that dairy products played a significant role in the dietary and labor balance. The smaller settlements are typical of the earliest Trypillia A stage but remain predominant at the later stages. A larger

14 CFR 21.125 - Production inspection system: Materials Review Board.

Science.gov (United States)

2010-01-01

... § 21.125 Production inspection system: Materials Review Board. Link to an amendment published at 74 FR... Materials Review Board action for at least two years. (b) The production inspection system required in § 21... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Production inspection system: Materials...

Aeronautical Mobile Airport Communications System (AeroMACS)

Science.gov (United States)

Budinger, James M.; Hall, Edward

2011-01-01

To help increase the capacity and efficiency of the nation s airports, a secure wideband wireless communications system is proposed for use on the airport surface. This paper provides an overview of the research and development process for the Aeronautical Mobile Airport Communications System (AeroMACS). AeroMACS is based on a specific commercial profile of the Institute of Electrical and Electronics Engineers (IEEE) 802.16 standard known as Wireless Worldwide Interoperability for Microwave Access or WiMAX (WiMax Forum). The paper includes background on the need for global interoperability in air/ground data communications, describes potential AeroMACS applications, addresses allocated frequency spectrum constraints, summarizes the international standardization process, and provides findings and recommendations from the world s first AeroMACS prototype implemented in Cleveland, Ohio, USA.

Large-Area, Multi-Junction, Epitaxial Lift-Off Solar Cells with Backside Contacts, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — In this Phase I program we propose to develop an innovative fabrication process to introduce backside contacts to MicroLink Devices' large-area, multi-junction...

Low Elevation Coastal Zone (LECZ) Urban-Rural Population and Land Area Estimates, Version 2

Data.gov (United States)

National Aeronautics and Space Administration — The Low Elevation Coastal Zone (LECZ) Urban-Rural Population and Land Area Estimates, Version 2 data set consists of country-level estimates of urban population,...

Crack path in aeronautical titanium alloy under ultrasonic torsion loading

Directory of Open Access Journals (Sweden)

A. Nikitin

2016-01-01

Full Text Available This paper discusses features of fatigue crack initiation and growth in aeronautical VT3-1 titanium alloy under pure torsion loading in gigacycle regime. Two materials: extruded and forged VT3-1 titanium alloys were studied. Torsion fatigue tests were performed up to fatigue life of 109 cycles. The results of the torsion tests were compared with previously obtained results under fully reversed axial loading on the same alloys. It has been shown that independently on production process as surface as well subsurface crack initiation may appear under ultrasonic torsion loading despite the maximum stress amplitude located at the specimen surface. In the case of surface crack initiation, a scenario of crack initiation and growth is similar to HCF regime except an additional possibility for internal crack branching. In the case of subsurface crack, the initiation site is located below the specimen surface (about 200 μm and is not clearly related to any material flaw. Internal crack initiation is produced by shear stress in maximum shear plane and early crack growth is in Mode II. Crack branching is limited in the case of internal crack initiation compared to surface one. A typical ‘fish-eye’ crack can be observed at the torsion fracture surface, but mechanism of crack initiation seems not to be the same than under axial fatigue loading.

Aqua AIRS Level 3 Support Daily Product (AIRS+AMSU+HSB) V006

Data.gov (United States)

National Aeronautics and Space Administration — The L3 support products are similar to the L3 standard products but contain fields which are not fully validated, or are inputs or intermediary values. Because no...

Stable carbon isotopes in high-productive littoral areas of Lake Constance

International Nuclear Information System (INIS)

Chondrogianni, C.

1992-01-01

The investigation attempted to extend understanding of C fractionation in aquatic systems and to facilitate the interpretation of palaeolimnological isotope data. Particular interest was taken in the aspect of bicarbonate assimilation at high productivity and in the exchange processes between water and atmosphere. Littoral areas of lakes were chosen as areas of investigation as they offer a high-productivity environment with large populations of submersed macrophytes and periphytes. To get a better picture of the factors influencing C fractionation, litteral and pellagial regions were compared on the one hand and a mesotrophic (Ueberlingersee) and a eutrophic (Gnadensee) lake section on the other hand. Further factors of differentiation between the two lake parts were: Volume, the proportional share of the litteral area, and water exchange. Two main fields of interest were investigated: - Determination of the C isotope ratio (δ 13 C) in the dissolved bicarbonate of water in the sediments of a single year for the purpose of calibrating its fractionation in the basis of the present chemical and physical status of the lake water (water programme). - Determination of δ 13 C in selected carbonate components from sedimentary cores in order to find out about palaeolimnological events in the areas of investigation (sediment programme). (orig.) [de

14 CFR 61.161 - Aeronautical experience: Rotorcraft category and helicopter class rating.

Science.gov (United States)

2010-01-01

... category and helicopter class rating. 61.161 Section 61.161 Aeronautics and Space FEDERAL AVIATION... helicopter class rating. (a) A person who is applying for an airline transport pilot certificate with a rotorcraft category and helicopter class rating, must have at least 1,200 hours of total time as a pilot that...

14 CFR 61.52 - Use of aeronautical experience obtained in ultralight vehicles.

Science.gov (United States)

2010-01-01

... ratings issued under this part: (1) A sport pilot certificate. (2) A flight instructor certificate with a sport pilot rating; (3) A private pilot certificate with a weight-shift-control or powered parachute... provisions of §§ 61.69 and 61.415(e). (c) A person using aeronautical experience obtained in an ultralight...

Aeronautical education and research at the Swiss Institute of Technology in Zurich

Science.gov (United States)

Karner, L; Ackeret, J

1931-01-01

Progress in the scientific and practical fields of aviation has caused the Swiss Institute of Technology to organize lectures and practical training courses in all three branches of aeronautics and to found centers of scientific research, laboratories, etc., in order to supply the government and industries with scientifically and technically trained engineers.

Improved Combustion Products Monitor for the ISS, Phase II

Data.gov (United States)

National Aeronautics and Space Administration — The Compound Specific Analyzer – Combustion Products, used on the International Space Station as a warning monitor of smoldering or combustion events, is being...

Improved Combustion Products Monitor for the ISS, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — The Compound Specific Analyzer - Combustion Products is used on the International Space Station as a warning monitor of smoldering or combustion events and, after...

Problems of finding production losses in smoke areas

Energy Technology Data Exchange (ETDEWEB)

Vins, B

1971-01-01

The world-wide research results obtained up to now give evidence that the injurious effects of emissions in forest stands occur in the form of the decrease of diameter increment leading to premature die-back of trees. The effects of emissions are different both in individual tree species and in stand components. The occurrence and size of increment losses are also influenced by the interaction of climate conditions and concentration of pollutants in the atmosphere. Combining original methodical procedures and laboratory equipment for production ecology with computer processing techniques bring about favorable conditions for the solution of problems concerning the emission effects on the production of forest stands. No solution has been found as yet for the problem of diameter increment decrease differentiation based on age and social position of trees. Research work should provide data necessary for the economic evaluation of losses in the main smoke areas and for the choice of suitable economic measures aimed at the mitigation of injuries. This study indicates that it is the modified increment boring method which becomes an efficient method for the control of production processes and for the evaluation of increment changes both in research work and in practice.

14 CFR 3.5 - Statements about products, parts, appliances and materials.

Science.gov (United States)

2010-01-01

..., appliances and materials. 3.5 Section 3.5 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION DEFINITIONS GENERAL REQUIREMENTS § 3.5 Statements about products, parts, appliances... product, part, appliance or material. (b) Prohibition against fraudulent and intentionally false...

78 FR 59753 - Public Notice for Waiver of Aeronautical Land-Use Assurance

Science.gov (United States)

2013-09-27

.... The property is located at the southeast corner of Berteau Avenue and George Street in Schiller Park... aeronautical use of the property (to become effective after the sale to the Village of Schiller Park) is to be... commitment by the FAA to financially assist in the disposal of the subject airport property nor a...

Archive of Census Related Products (ACRP): 1992 Boundary Files

Data.gov (United States)

National Aeronautics and Space Administration — The 1992 Boundary Files portion of the Archive of Census Related Products (ACRP) consists of 1992 boundary data from the U.S. Census Bureau's Topologically...

14 CFR 25.1182 - Nacelle areas behind firewalls, and engine pod attaching structures containing flammable fluid...

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Nacelle areas behind firewalls, and engine...: TRANSPORT CATEGORY AIRPLANES Powerplant Powerplant Fire Protection § 25.1182 Nacelle areas behind firewalls... immediately behind the firewall, and each portion of any engine pod attaching structure containing flammable...

14 CFR 151.93 - Buildings; utilities; sidewalks; parking areas; and landscaping.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Buildings; utilities; sidewalks; parking....93 Buildings; utilities; sidewalks; parking areas; and landscaping. (a) Only buildings or parts of buildings intended to house facilities or activities directly related to the safety of persons at the...

PREFACE: International Scientific and Research Conference on Topical Issues in Aeronautics and Astronautics (dedicated to the 55th anniversary from the foundation of SibSAU)

Science.gov (United States)

2015-10-01

The International Scientific and Research Conference ''Topical Issues in Aeronautics and Astronautics'' is one of the most significant scientific conferences arranged by the Reshetnev Siberian State Aerospace University (SibSAU) which is located in the Krasnoyarsk Region of Russian Federation. In April 2015 this Conference was dedicated to the 55th anniversary from the foundation of the University. Traditionally, the Conference is seen as emblematic of the University's specialty and is annually organized in April, when the first human travelled into space. This Conference is arranged for undergraduate, graduate and postgraduate students, scientists and lecturers, as well as developers, designers and constructors representing leading companies and enterprises of the aerospace sector to give opportunities to present their projects, research work and results. The Conference is a great chance to connect scientists and highly-qualified and skilled specialists with a new community of future scientists and practitioners in the aerospace sector. The Conference proceedings include papers presented by creative young specialists closely connected with aviation and space vehicles - design, production, problem-solving in space machine building and aerospace education, macro- and microeconomic development of the field, new approaches to solving philosophical and social problems, - experienced scientists and specialists, and all those who want to dedicate themselves to aeronautics and astronautics. The selected papers are presented in these proceedings to share University research results, innovations and cutting-edge technologies with the international community to develop aeronautics and astronautics on a global scale.

14 CFR 183.63 - Continuing requirements: Products, parts or appliances.

Science.gov (United States)

2010-01-01

... appliances. 183.63 Section 183.63 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF... Designation Authorization § 183.63 Continuing requirements: Products, parts or appliances. For any approval or certificate for a product, part or appliance issued under the authority of this subpart, or under the...

BigFoot Leaf Area Index Surfaces for North and South American Sites, 2000-2003

Data.gov (United States)

National Aeronautics and Space Administration — ABSTRACT: The BigFoot project gathered leaf area index (LAI) data for nine EOS Land Validation Sites located from Alaska to Brazil from 2000 to 2003. Each site is...

HANPP Collection: Global Patterns in Net Primary Productivity (NPP)

Data.gov (United States)

National Aeronautics and Space Administration — The Global Patterns in Net Primary Productivity (NPP) portion of the HANPP Collection maps the net amount of solar energy converted to plant organic matter through...

National Aeronautics Research, Development, Test and Evaluation (RDT&E) Infrastructure Plan

Science.gov (United States)

2011-01-01

addressed in the National Aeronautics R&D Plan, identi- fying unnecessary redundancy solely on the basis of infrastructure required to support H H13 ...near, mid, and far terms, and impact not only scramjet propulsion systems, but potential turbine-based combined cycle systems as well. Turbine Engine...Icing Test Facilities A greater understanding of the impact that icing conditions have on turbine engine opera- tions is needed to develop enhanced

Estimating Major Crop Water Productivity at Neyshabour Basin and Optimize Crop Area

Directory of Open Access Journals (Sweden)

Yavar Pourmohamad

2017-06-01

Full Text Available Introductionin current situation when world is facing massive population, producing enough food and adequate income for people is a big challenge specifically for governors. This challenge gets even harder in recent decades, due to global population growth which was projected to increase to 7.8 billion in 2025. Agriculture as the only industry that has ability to produce food is consuming 90 percent of fresh water globally. Despite of increasing for food demand, appropriate agricultural land and fresh water resources are restricted. To solve this problem, one is to increase water productivity which can be obtain by irrigation. Iran is not only exempted from this situation but also has more critical situation due to its dry climate and inappropriate precipitation distribution spatially and temporally, also uneven distribution of population which is concentrate in small area. The only reasonable solution by considering water resources limitation and also restricted crop area is changing crop pattern to reach maximum or at least same amount of income by using same or less amount of water. The purpose of this study is to assess financial water productivity and optimize farmer’s income by changing in each crop acreage at basin and sub-basin level with no extra groundwater withdrawals, also in order to repair the damages which has enforce to groundwater resources during last decades a scenario of using only 80percent of renewable water were applied and crop area were optimize to provide maximum or same income for farmers. Materials and methodsThe Neyshabour basin is located in northeast of Iran, the total geographical area of basin is 73,000 km2 consisting of 41,000 km2 plain and the rest of basin is mountains. This Basin is a part of Kalshoor catchment that is located in southern part of Binaloud heights and northeast of KavirMarkazi. In this study whole Neyshabour basin were divided into 199 sub-basins based on pervious study.Based on official

77 FR 20522 - Airworthiness Directives; Lockheed Martin Corporation/Lockheed Martin Aeronautics Company Airplanes

Science.gov (United States)

2012-04-05

..., Airframe Branch, ACE-117A, FAA, Atlanta Aircraft Certification Office (ACO), 1701 Columbia Avenue, College... airworthiness directive (AD) for all Lockheed Martin Corporation/Lockheed Martin Aeronautics Company Model L... the manufacturer's original fatigue design life goal. This new AD adds Model L-1011-385-3 airplanes to...

Forced decontamination of fission products deposited on urban areas

International Nuclear Information System (INIS)

Warming, L.

1984-12-01

Long-lived fission products may be deposited in the environment following a serious reactor accident. Areas of special concern are cities where the collective dose might be high because of the population. An extensive literature list is presented here. Only a few of the references deal with the problem as a whole. Some references deal with non-radiaoctive materials but give us useful information about the behaviour of particles on outdoor surfaces. (author)

A Global Database of Field-observed Leaf Area Index in Woody Plant Species, 1932-2011

Data.gov (United States)

National Aeronautics and Space Administration — ABSTRACT: This data set provides global leaf area index (LAI) values for woody species. The data are a compilation of field-observed data from 1,216 locations...

Nonlinear Acoustic and Ultrasonic NDT of Aeronautical Components

Science.gov (United States)

Van Den Abeele, Koen; Katkowski, Tomasz; Mattei, Christophe

2006-05-01

In response to the demand for innovative microdamage inspection systems, with high sensitivity and undoubted accuracy, we are currently investigating the use and robustness of several acoustic and ultrasonic NDT techniques based on Nonlinear Elastic Wave Spectroscopy (NEWS) for the characterization of microdamage in aeronautical components. In this report, we illustrate the results of an amplitude dependent analysis of the resonance behaviour, both in time (signal reverberation) and in frequency (sweep) domain. The technique is applied to intact and damaged samples of Carbon Fiber Reinforced Plastics (CFRP) composites after thermal loading or mechanical fatigue. The method shows a considerable gain in sensitivity and an incontestable interpretation of the results for nonlinear signatures in comparison with the linear characteristics. For highly fatigued samples, slow dynamical effects are observed.

AQUAPEAT 95. New methods for purifying the run-offs of peat production areas

International Nuclear Information System (INIS)

Selin, P.; Marja-aho, J.; Madekivi, O.

1994-01-01

The aim of Aqua Peat 95-project was to develop new methods for purifying the runoff coming from the peat production areas. The national water protection program for the year 1995 (Ympaeristoeministerioe 1988) as well as the level of the requirements and instructions from the authorities will obligate the peat producers to find new and practical methods for water purification. The chemical treatment reduced the load of peat production areas and the quality of treated water was almost equal to the runoffs coming from the natural bog area. The chemicals were the same as used in purifying drinking water. This purifying method is quite expensive and for this reason applicable only in special cases. The transpiration and evaporation and the soil filtering capacity of the forest area was also observed. The purifying capacity was very good, especially for the total nutrients and suspended solids. The changes of the ground water quality were insignificant but the level of the ground water in the field areas was higher than before. The long term changes of the vegetation and the trees could not be seen, yet. The most important water management practice is the detention of the discharge. The capacity of the sedimentation will increase by using the flow regulation in the sedimentation ponds and ditches. The changes in the water biology downstreams the Laeynioensuo peat production area were clearly seen near the main ditch. Because of the suspended solids the bottom sediment changed which lead to impacts to the bottom fauna. The colour of the runoffs as well as the changes in the sediment influenced on the macrophytes

Potential areas for the expansion of the sugar cane production; Areas potenciais para a expansao da producao de cana-de-acucar

Energy Technology Data Exchange (ETDEWEB)

NONE

2009-10-15

The evaluation of the potential areas for the expansion of the sugar cane cultivation was based on the estimation of the agricultural productivity aptitude as function of the soil and climate characteristics using maps with geo referred in scales of 1/5,000,000. Areas had been discarded which integrate of three large biomass of the country: Amazonia, Pantanal and Mata Atlantica, and all the areas with some type of restriction, such as environmental reservations, national parks, indigenous, military and urban areas. Were not considered areas with crop mechanization essential for the environmental and social sustainability with declivity more than 12%.

Prototyping agile production, analytics and visualization pipelines for big-data on the NASA Earth Exchange (NEX)

Data.gov (United States)

National Aeronautics and Space Administration — The goal of this project is to develop capabilities for an integrated petabyte-scale Earth science product development, production and collaborative analysis...

A Global Database of Field-observed Leaf Area Index in Woody Plant Species, 1932-2011

Data.gov (United States)

National Aeronautics and Space Administration — This data set provides global leaf area index (LAI) values for woody species. The data are a compilation of field-observed data from 1,216 locations obtained from...

Bibliometric analysis of the scientific production in the area of Optometry.

Science.gov (United States)

Povedano Montero, F J; López-Muñoz, F; Hidalgo Santa Cruz, F

2016-04-01

Using a bibliometric approach an analysis was made of the scientific publications of Spanish investigators in the area of optometry, from 1974 until 2013. The EMBASE database was used for this study, employing optomtr*, optic*, visual, vision, eye*, and ophthalm* as search terms. The most common bibliometric indicators were applied for the selected publications. The number of published articles retrieved for Spain from 1974-2013 was 1,055. The growth of publications was more exponential (R=0.93) than linear (R= 0.71). The doubling time of scientific production was 3.63 years. The level of productivity primarily corresponded to small producers (Transience index of 64%). The collaboration index was 4.4 authors per paper. The majority of the output was generated in academic settings (62.27%). The Bradford core was formed by four journals, in which Optometry and Vision Science accounted for the majority of publications, with 11.85%. Research in the area of optometry in Spain is in a phase of exponential growth, containing a high level of transient authors, which may indicate either a low productivity or the presence of investigators from other related fields that have published in a sporadic manner in this area. A small number of research groups are responsible for producing the majority of articles, primarily in an academic setting. There is a high concentration of publications in a few journals. Copyright © 2015 Sociedad Española de Oftalmología. Published by Elsevier España, S.L.U. All rights reserved.

Smoke production from multiple nuclear explosions in nonurban areas

International Nuclear Information System (INIS)

Small, R.D.; Bush, B.W.

1985-01-01

The amount of smoke that may be produced by wildland or rural fires as a consequence of a large-scale nuclear exchange is estimated. The calculation is based on a compilation of rural military facilities, identified from a wide variety of unclassified sources, together with data on their geographic positions, surrounding vegetation (fuel), and weather conditions. The ignition area (corrected for fuel moisture) and the amount of fire spread are used to calculate the smoke production. The results show a substantially lower estimated smoke production (from wildland fires) than in earlier nuclear winter studies. The amount varies seasonally and at its peak is less by an order of magnitude than the estimated threshold level necessary for a major attenuation of solar radiation. 32 references, 6 figures, 2 tables

14 CFR 91.138 - Temporary flight restrictions in national disaster areas in the State of Hawaii.

Science.gov (United States)

2010-01-01

... disaster areas in the State of Hawaii. 91.138 Section 91.138 Aeronautics and Space FEDERAL AVIATION... areas in the State of Hawaii. (a) When the Administrator has determined, pursuant to a request and justification provided by the Governor of the State of Hawaii, or the Governor's designee, that an inhabited...

Archive of Census Related Products (ACRP): 1980 SAS Transport Files

Data.gov (United States)

National Aeronautics and Space Administration — The 1980 SAS Transport Files portion of the Archive of Census Related Products (ACRP) contains housing and population demographics from the 1980 Summary Tape File...

BOREAS Follow-On DSP-05 Process-Modeled Net Primary Productivity

Data.gov (United States)

National Aeronautics and Space Administration — ABSTRACT: The BOREAS DSP-5 team generated a NPP image over the BOREAS region from a process-based ecosystem model, the Boreal Ecosystem Productivity Simulator...

The National Aeronautics and Space Administration's Earth Science Applications Program: Exploring Partnerships to Enhance Decision Making in Public Health Practice

Science.gov (United States)

Vann, Timi S.; Venezia, Robert A.

2002-01-01

The National Aeronautics and Space Administration (NASA), Earth Science Enterprise is engaged in applications of NASA Earth science and remote sensing technologies for public health. Efforts are focused on establishing partnerships with those agencies and organizations that have responsibility for protecting the Nation's Health. The program's goal is the integration of NASA's advanced data and technology for enhanced decision support in the areas of disease surveillance and environmental health. A focused applications program, based on understanding partner issues and requirements, has the potential to significantly contribute to more informed decision making in public health practice. This paper intends to provide background information on NASA's investment in public health and is a call for partnership with the larger practice community.

The assessment of EUMETSAT HSAF Snow Products for mountainuos areas in the eastern part of Turkey

Science.gov (United States)

Akyurek, Z.; Surer, S.; Beser, O.; Bolat, K.; Erturk, A. G.

2012-04-01

Monitoring the snow parameters (e.g. snow cover area, snow water equivalent) is a challenging work. Because of its natural physical properties, snow highly affects the evolution of weather from daily basis to climate on a longer time scale. The derivation of snow products over mountainous regions has been considered very challenging. This can be done by periodic and precise mapping of the snow cover. However inaccessibility and scarcity of the ground observations limit the snow cover mapping in the mountainous areas. Today, it is carried out operationally by means of optical satellite imagery and microwave radiometry. In retrieving the snow cover area from satellite images bring the problem of topographical variations within the footprint of satellite sensors and spatial and temporal variation of snow characteristics in the mountainous areas. Most of the global and regional operational snow products use generic algorithms for flat and mountainous areas. However the non-uniformity of the snow characteristics can only be modeled with different algorithms for mountain and flat areas. In this study the early findings of Satellite Application Facilities on Hydrology (H-SAF) project, which is financially supported by EUMETSAT, will be presented. Turkey is a part of the H-SAF project, both in product generation (eg. snow recognition, fractional snow cover and snow water equivalent) for mountainous regions for whole Europe, cal/val of satellite-derived snow products with ground observations and cal/val studies with hydrological modeling in the mountainous terrain of Europe. All the snow products are operational on a daily basis. For the snow recognition product (H10) for mountainous areas, spectral thresholding methods were applied on sub pixel scale of MSG-SEVIRI images. The different spectral characteristics of cloud, snow and land determined the structure of the algorithm and these characteristics were obtained from subjective classification of known snow cover features

Cone and seed yields in white spruce seed production areas

Science.gov (United States)

John A. Pitcher

1966-01-01

The source of seed is an important consideration in the reforestation program on the National Forests in the North Central Region. Thirty-five seed production areas have been set up in the Region, along the lines proposed by the North Central Forest Experiment Station, to provide control of seed source. Red pine, white pine, shortleaf and loblolly pine, and white...

Archive of Census Related Products (ACRP): 1990 Standard Extract Files

Data.gov (United States)

National Aeronautics and Space Administration — The 1990 Standard Extract Files portion of the Archive of Census Related Products (ACRP) contains population and housing data derived from the U.S. Census Bureau's...

Development of nonlinear acoustic propagation analysis tool toward realization of loud noise environment prediction in aeronautics

Energy Technology Data Exchange (ETDEWEB)

Kanamori, Masashi, E-mail: kanamori.masashi@jaxa.jp; Takahashi, Takashi, E-mail: takahashi.takashi@jaxa.jp; Aoyama, Takashi, E-mail: aoyama.takashi@jaxa.jp [Japan Aerospace Exploration Agency, 7-44-1, Jindaijihigashi-machi, Chofu, Tokyo (Japan)

2015-10-28

Shown in this paper is an introduction of a prediction tool for the propagation of loud noise with the application to the aeronautics in mind. The tool, named SPnoise, is based on HOWARD approach, which can express almost exact multidimensionality of the diffraction effect at the cost of back scattering. This paper argues, in particular, the prediction of the effect of atmospheric turbulence on sonic boom as one of the important issues in aeronautics. Thanks to the simple and efficient modeling of the atmospheric turbulence, SPnoise successfully re-creates the feature of the effect, which often emerges in the region just behind the front and rear shock waves in the sonic boom signature.

LBA-ECO CD-04 Leaf Area Index, km 83 Tower Site, Tapajos National Forest, Brazil

Data.gov (United States)

National Aeronautics and Space Administration — ABSTRACT: Leaf area index was estimated in an 18 ha plot at the logged forest tower site, km 83, Tapajos National Forest, Para, Brazil. The plot was adjacent to the...

BOREAS Follow-On DSP-05 Process-Modeled Net Primary Productivity

Data.gov (United States)

National Aeronautics and Space Administration — The BOREAS DSP-5 team generated a NPP image over the BOREAS region from a process-based ecosystem model, the Boreal Ecosystem Productivity Simulator (BEPS). The NPP...

TRENDS: The aeronautical post-test database management system

Science.gov (United States)

Bjorkman, W. S.; Bondi, M. J.

1990-01-01

TRENDS, an engineering-test database operating system developed by NASA to support rotorcraft flight tests, is described. Capabilities and characteristics of the system are presented, with examples of its use in recalling and analyzing rotorcraft flight-test data from a TRENDS database. The importance of system user-friendliness in gaining users' acceptance is stressed, as is the importance of integrating supporting narrative data with numerical data in engineering-test databases. Considerations relevant to the creation and maintenance of flight-test database are discussed and TRENDS' solutions to database management problems are described. Requirements, constraints, and other considerations which led to the system's configuration are discussed and some of the lessons learned during TRENDS' development are presented. Potential applications of TRENDS to a wide range of aeronautical and other engineering tests are identified.

A review of the Magnus effect in aeronautics

Science.gov (United States)

Seifert, Jost

2012-11-01

The Magnus effect is well-known for its influence on the flight path of a spinning ball. Besides ball games, the method of producing a lift force by spinning a body of revolution in cross-flow was not used in any kind of commercial application until the year 1924, when Anton Flettner invented and built the first rotor ship Buckau. This sailboat extracted its propulsive force from the airflow around two large rotating cylinders. It attracted attention wherever it was presented to the public and inspired scientists and engineers to use a rotating cylinder as a lifting device for aircraft. This article reviews the application of Magnus effect devices and concepts in aeronautics that have been investigated by various researchers and concludes with discussions on future challenges in their application.

North Atlantic IFR Route Planning Chart GEO-TIFF - Aeronautical Information Services Digital Products

Data.gov (United States)

Department of Transportation — North Atlantic Route Chart is designed for FAA Controllers to monitor transatlantic flights, this 5-color chart shows oceanic control areas, coastal navigation aids,...

North Atlantic IFR Route Planning Chart PDF File - Aeronautical Information Services Digital Products

Data.gov (United States)

Department of Transportation — North Atlantic Route Chart is designed for FAA Controllers to monitor transatlantic flights, this 5-color chart shows oceanic control areas, coastal navigation aids,...

76 FR 58416 - Airworthiness Directives; Lockheed Martin Corporation/Lockheed Martin Aeronautics Company Model L...

Science.gov (United States)

2011-09-21

... Aircraft Certification Office (ACO), 1701 Columbia Avenue, College Park, Georgia 30337; phone: 404- 474... Airworthiness Directives; Lockheed Martin Corporation/Lockheed Martin Aeronautics Company Model L-1011 Series...). SUMMARY: We propose to adopt a new airworthiness directive (AD) for certain Model L-1011 series airplanes...

LBA-ECO CD-04 Leaf Area Index, km 83 Tower Site, Tapajos National Forest, Brazil

Data.gov (United States)

National Aeronautics and Space Administration — Leaf area index was estimated in an 18 ha plot at the logged forest tower site, km 83, Tapajos National Forest, Para, Brazil. The plot was adjacent to the eddy flux...

Reference dosimetry of proton pencil beams based on dose-area product: a proof of concept.

Science.gov (United States)

Gomà, Carles; Safai, Sairos; Vörös, Sándor

2017-06-21

This paper describes a novel approach to the reference dosimetry of proton pencil beams based on dose-area product ([Formula: see text]). It depicts the calibration of a large-diameter plane-parallel ionization chamber in terms of dose-area product in a 60 Co beam, the Monte Carlo calculation of beam quality correction factors-in terms of dose-area product-in proton beams, the Monte Carlo calculation of nuclear halo correction factors, and the experimental determination of [Formula: see text] of a single proton pencil beam. This new approach to reference dosimetry proves to be feasible, as it yields [Formula: see text] values in agreement with the standard and well-established approach of determining the absorbed dose to water at the centre of a broad homogeneous field generated by the superposition of regularly-spaced proton pencil beams.

Advanced Product Water Removal and Management (APWR) Fuel Cell System, Phase II

Data.gov (United States)

National Aeronautics and Space Administration — The proposed innovation is a passive, self-regulating, gravity-independent Advanced Product Water Removal (APWR) system for Polymer Electrolyte Membrane (PEM)...

Estimating the Fractional Vegetation Cover from GLASS Leaf Area Index Product

Directory of Open Access Journals (Sweden)

Zhiqiang Xiao

2016-04-01

Full Text Available The fractional vegetation cover (FCover is an essential biophysical variable and plays a critical role in the carbon cycle studies. Existing FCover products from satellite observations are spatially incomplete and temporally discontinuous, and also inaccurate for some vegetation types to meet the requirements of various applications. In this study, an operational method is proposed to calculate high-quality, accurate FCover from the Global LAnd Surface Satellite (GLASS leaf area index (LAI product to ensure physical consistency between LAI and FCover retrievals. As a result, a global FCover product (denoted by TRAGL were generated from the GLASS LAI product from 2000 to present. With no missing values, the TRAGL FCover product is spatially complete. A comparison of the TRAGL FCover product with the Geoland2/BioPar version 1 (GEOV1 FCover product indicates that these FCover products exhibit similar spatial distribution pattern. However, there were relatively large discrepancies between these FCover products over equatorial rainforests, broadleaf crops in East-central United States, and needleleaf forests in Europe and Siberia. Temporal consistency analysis indicates that TRAGL FCover product has continuous trajectories. Direct validation with ground-based FCover estimates demonstrated that TRAGL FCover values were more accurate (RMSE = 0.0865, and R2 = 0.8848 than GEOV1 (RMSE = 0.1541, and R2 = 0.7621.

77 FR 33254 - Expediting Transition of Government Performed and Sponsored Aeronautics Research and Development

Science.gov (United States)

2012-06-05

... internal R&D strategies, planning or execution? 9. What recommendations would you provide to make future... planning documents for providing transparency of goals, priorities, and outcomes, with an emphasis on... completed a five- year national aeronautics R&D planning and assessment cycle. ASTS seeks public comment on...

14 CFR 105.21 - Parachute operations over or into a congested area or an open-air assembly of persons.

Science.gov (United States)

2010-01-01

... congested area or an open-air assembly of persons. 105.21 Section 105.21 Aeronautics and Space FEDERAL... congested area of a city, town, or settlement, or an open-air assembly of persons unless a certificate of... over a congested area or an open-air assembly of persons with a fully deployed and properly functioning...

Advanced Product Water Removal and Management (APWR) Fuel Cell System, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — The proposed innovation is a passive, self-regulating, gravity-independent Advanced Product Water Removal and management (APWR) system for incorporation into Polymer...

Vortex methods in aeronautics: how to make things work

International Nuclear Information System (INIS)

Voutsinas, S.G.

2004-01-01

Vortex methods constitute a particular class in CFD. They are grid-free, they use Lagrangian co-ordinates and most importantly they use vorticity as mail flow variable instead of the velocity. In aeronautics they are in use for over than 20 years with quite impressing results. However, rather a limited number of researchers would prefer them. This could be due to some particularities vortex methods have in their implementation. In view of trying to clarify thins, the present paper reviews the current state of art and details some of the 'difficult' points of vortex methods. Although the focus is mainly on rotor problems, the presented techniques can be used in other applications as well. (author)

Utility and recognition of lines and linear patterns on electronic displays depicting aeronautical charting information

Science.gov (United States)

2009-01-01

This report describes a study conducted to explore the utility and recognition of lines and linear patterns on electronic displays depicting aeronautical charting information. The study gathered data from a large number of pilots who conduct all type...

Global Navigation Satellite System (GNSS) Final Clock Product (5 minute resolution, daily files, generated weekly) from NASA CDDIS

Data.gov (United States)

National Aeronautics and Space Administration — This derived product set consists of Global Navigation Satellite System Final Satellite and Receiver Clock Product (5-minute granularity, daily files, generated...

Concept Study: Exploration and Production in Environmentally Sensitive Arctic Areas

Energy Technology Data Exchange (ETDEWEB)

Shirish Patil; Rich Haut; Tom Williams; Yuri Shur; Mikhail Kanevskiy; Cathy Hanks; Michael Lilly

2008-12-31

The Alaska North Slope offers one of the best prospects for increasing U.S. domestic oil and gas production. However, this region faces some of the greatest environmental and logistical challenges to oil and gas production in the world. A number of studies have shown that weather patterns in this region are warming, and the number of days the tundra surface is adequately frozen for tundra travel each year has declined. Operators are not allowed to explore in undeveloped areas until the tundra is sufficiently frozen and adequate snow cover is present. Spring breakup then forces rapid evacuation of the area prior to snowmelt. Using the best available methods, exploration in remote arctic areas can take up to three years to identify a commercial discovery, and then years to build the infrastructure to develop and produce. This makes new exploration costly. It also increases the costs of maintaining field infrastructure, pipeline inspections, and environmental restoration efforts. New technologies are needed, or oil and gas resources may never be developed outside limited exploration stepouts from existing infrastructure. Industry has identified certain low-impact technologies suitable for operations, and has made improvements to reduce the footprint and impact on the environment. Additional improvements are needed for exploration and economic field development and end-of-field restoration. One operator-Anadarko Petroleum Corporation-built a prototype platform for drilling wells in the Arctic that is elevated, modular, and mobile. The system was tested while drilling one of the first hydrate exploration wells in Alaska during 2003-2004. This technology was identified as a potentially enabling technology by the ongoing Joint Industry Program (JIP) Environmentally Friendly Drilling (EFD) program. The EFD is headed by Texas A&M University and the Houston Advanced Research Center (HARC), and is co-funded by the National Energy Technology Laboratory (NETL). The EFD

Research regarding agro-tourism stage in Apuseni Mountains area and capitalize of traditional products through this

Directory of Open Access Journals (Sweden)

Ramona Ciolac

2013-05-01

Full Text Available Most studies have shown that rural tourism combined with rural resources and traditional products would be an important "tool" for revitalizing the rural economy, and that they should be essential components of the rural economy development strategy, desirable goal for Apuseni Mountains. A great part of the localities from this area are great keeper of traditions. If on the customs and traditions we put the mountain natural resources and specific traditional products results a valuable tourist product that could local increase revenue and attract young people in rural areas. Many rural areas have a potentially remarkable natural and cultural history, and those who developed the required tourist infrastructure (boarding/private farms, and realized tourist opportunity and have used it with success.

Finite Element Analysis of Warpage in Laminated Aluminium Alloy Plates for Machining of Primary Aeronautic Parts

International Nuclear Information System (INIS)

Reis, A. C.; Moreira Filho, L. A.; Menezes, M. A.

2007-01-01

The aim of this paper consists in presenting a method of simulating the warpage in 7xxx series aluminium alloy plates. To perform this simulation finite element software MSC.Patran and MSC.Marc were used. Another result of this analysis will be the influence on material residual stresses induced on the raw material during the rolling process upon the warpage of primary aeronautic parts, fabricated through machining (milling) at Embraer. The method used to determinate the aluminium plate residual stress was Layer Removal Test. The numerical algorithm Modified Flavenot Method was used to convert layer removal and beam deflection in stress level. With such information about the level and profile of residual stresses become possible, during the step that anticipate the manufacturing to incorporate these values in the finite-element approach for modelling warpage parts. Based on that warpage parameter surely the products are manufactured with low relative vulnerability propitiating competitiveness and price

Role of Production Area, Seasonality and Age of Fermented Camel (Camelus Dromedarius Milk Gariss on Mineral Contents

Directory of Open Access Journals (Sweden)

Adam Ismail Ahmed

2016-12-01

Full Text Available The objective of this work was to study the differences between some minerals content of gariss samples collected from two different production areas in two different production systems (i.e. traditional system Kordofan area and semi-intensive system- which, the camels are kept in an open barn and graze around the farm. The lactating female camels are supplemented with concentrates in addition to good quality ration containing groundnut cake and Sorghum biocolor and water supply upon required in Kordofan and Khartoum provinces in Sudan at the different seasons (summer, autumn and winter and their gariss samples were collected. Sodium, potassium, calcium, magnesium and phosphorus of gariss samples collected in autumn season (Kordofan area, summer season (Khartoum area, and winter season (Khartoum and Kordofan areas were determined, after that the age of gariss was noted from farmers directly when the samples were collected. Four different ages of gariss which registered were (5-8 hrs, 12 hrs, 48 hrs and more than 48 hrs. Each fermentation time (age of gariss was used for analyzing mineral contents. The results showed that gariss prepared from different production locations and in different seasons in Kordofan and Khartoum production areas were statistically different in most of the mineral contents determined. To conclude, different feeding sources or different physiological status may affect camels’ milk and consequently their gariss product, also different age of gariss had affects the mineral content of milk.

76 FR 48049 - Airworthiness Directives; Lockheed Martin Corporation/Lockheed Martin Aeronautics Company Model L...

Science.gov (United States)

2011-08-08

... Aircraft Certification Office (ACO), 1701 Columbia Avenue, College Park, Georgia 30337; phone: 404- 474... Corporation/Lockheed Martin Aeronautics Company Model L-1011 Series Airplanes AGENCY: Federal Aviation... existing airworthiness directive (AD) that applies to Model L-1011-385-1, L-1011-385-1-14, and L-1011- 385...

MODIS/Terra Gross Primary Productivity 8-Day L4 Global 1km SIN Grid V055

Data.gov (United States)

National Aeronautics and Space Administration — The Terra/MODIS Gross Primary Productivity (GPP) product (MOD17A2) is a cumulative composite of GPP values based on the radiation-use efficiency concept that is...

Survey of symbology for aeronautical charts and electronic displays : navigation aids, airports, lines, and linear patterns

Science.gov (United States)

2008-09-01

This industry survey documents the symbols for navigation aids, airports, lines, and linear patterns currently in use by avionics manufactureres and chart providers for depicting aeronautical charting information. Nine avionics display manufacturers ...

77 FR 49479 - Public Notice for Waiver Of Aeronautical Land-Use Assurance; Springfield-Beckley Municipal...

Science.gov (United States)

2012-08-16

... Aeronautical Land-Use Assurance; Springfield-Beckley Municipal Airport, Springfield, OH AGENCY: Federal... subject airport property nor a determination of eligibility for grant- in-aid funding from the FAA. The... or at Springfield-Beckley Municipal Airport, Springfield, Ohio. SUPPLEMENTARY INFORMATION: Following...

NAMMA MODIS/AQUA AND MODIS/TERRA DEEP BLUE PRODUCTS V1

Data.gov (United States)

National Aeronautics and Space Administration — The NAMMA MODIS/AQUA and MODIS/TERRA Deep Blue Products dataset is a collection of images depicting the aerosol optical depth derived from the MODIS deep blue...

Prospective areas in the production technology of scientific equipment for space research

Science.gov (United States)

Breslavets, A. V.

1974-01-01

The average labor of individual types of operations in the percentage ratio of the total labor consumption of manufacturing scientific instruments and apparatus for space research is presented. The prospective areas in the production technology of billet, machining, mechanical assembly, installation and assembly, adjustment and regulation and testing and control operations are noted. Basic recommendations are made with respect to further reduction of labor consumption and an increase in the productivity of labor when manufacturing scientific equipment for space research.

Efficiancy of hydrogen peroxide for cleaning production areas and equipments in the radiopharmaceutical production

Energy Technology Data Exchange (ETDEWEB)

Baptista, Tatyana S.; Batista, Vanessa; Gomes, Antonio; Matsuda, Margareth; Fukumori, Neuza; Araujo, Elaine B. de, E-mail: tsbaptista@ipen.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

2013-07-01

A great challenge in the radiopharmaceuticals production is to fulfill the Good Manufacturing Practices (GMPs), involving the validation of process and of all supporting activities such as cleaning and sanitization. The increasingly strict requirements for quality assurance system, with several norms and normative resolutions has led to a constant concern with programs and cleaning validation in pharmaceutical production. The main goal of GMP is to reduce risks inherent to pharmaceutical production, that is to reduce product contamination with microorganisms and cross-contamination. The basic requirements to prevent contamination is the development and implementation of efficient cleaning programs. In the case of clean rooms for the production of injectable radiopharmaceuticals, the requirement for cleaning programs is evidently higher due to the characteristics of these areas with hot cells for radioactive materials, where sterile radiopharmaceuticals are manipulated and distributed before administration to patients just after minutes or hours of its preparation. In the Radiopharmacy Department at IPEN it was established a cleaning program for clean rooms and hot cells using a hydrogen peroxide solution (20% proxitane alfa). The objective of this work was to assess effectiveness of this cleaning agent in reducing and/or eliminating microbial load in the clean rooms and equipment to acceptable levels in accordance with the current legislation. The analysis was conducted using results of the environmental monitoring program with and settling contact plates in clean rooms after the cleaning procedures. Furthermore, it was possible to evaluate the action of the sanitizing agent on the microbial population on the surface of equipment and clean rooms. It was also evaluated the best way to accomplish the cleaning program considering the dosimetric factor in each production process, as the main concern of pharmaceutical companies is the microbiological contamination, in

Efficiancy of hydrogen peroxide for cleaning production areas and equipments in the radiopharmaceutical production

International Nuclear Information System (INIS)

Baptista, Tatyana S.; Batista, Vanessa; Gomes, Antonio; Matsuda, Margareth; Fukumori, Neuza; Araujo, Elaine B. de

2013-01-01

A great challenge in the radiopharmaceuticals production is to fulfill the Good Manufacturing Practices (GMPs), involving the validation of process and of all supporting activities such as cleaning and sanitization. The increasingly strict requirements for quality assurance system, with several norms and normative resolutions has led to a constant concern with programs and cleaning validation in pharmaceutical production. The main goal of GMP is to reduce risks inherent to pharmaceutical production, that is to reduce product contamination with microorganisms and cross-contamination. The basic requirements to prevent contamination is the development and implementation of efficient cleaning programs. In the case of clean rooms for the production of injectable radiopharmaceuticals, the requirement for cleaning programs is evidently higher due to the characteristics of these areas with hot cells for radioactive materials, where sterile radiopharmaceuticals are manipulated and distributed before administration to patients just after minutes or hours of its preparation. In the Radiopharmacy Department at IPEN it was established a cleaning program for clean rooms and hot cells using a hydrogen peroxide solution (20% proxitane alfa). The objective of this work was to assess effectiveness of this cleaning agent in reducing and/or eliminating microbial load in the clean rooms and equipment to acceptable levels in accordance with the current legislation. The analysis was conducted using results of the environmental monitoring program with and settling contact plates in clean rooms after the cleaning procedures. Furthermore, it was possible to evaluate the action of the sanitizing agent on the microbial population on the surface of equipment and clean rooms. It was also evaluated the best way to accomplish the cleaning program considering the dosimetric factor in each production process, as the main concern of pharmaceutical companies is the microbiological contamination, in

Solid State Large Area Pulsed Solar Simulator for 3-, 4- and 6-Junction Solar Cell Arrays, Phase II

Data.gov (United States)

National Aeronautics and Space Administration — The Phase I was successful in delivering a complete prototype of the proposed innovation, an LED-based, solid state, large area, pulsed, solar simulator (ssLAPSS)....

76 FR 29022 - Public Notice for Waiver of Aeronautical Land-Use Assurance; Marshfield Municipal Airport...

Science.gov (United States)

2011-05-19

... Aeronautical Land-Use Assurance; Marshfield Municipal Airport, Marshfield, WI AGENCY: Federal Aviation... the Marshfield Municipal Airport, Marshfield, WI. The Wisconsin Department of Transportation (WisDOT... funding from the FAA. The disposition of proceeds from the disposal of the airport property will be in...

HANPP Collection: Global Patterns in Human Appropriation of Net Primary Productivity (HANPP)

Data.gov (United States)

National Aeronautics and Space Administration — The Global Patterns in Human Appropriation of Net Primary Productivity (HANPP) portion of the HANPP Collection represents a digital map of human appropriation of net...

Uncooled Radiation Hard Large Area SiC X-ray and EUV Detectors and 2D Arrays, Phase II

Data.gov (United States)

National Aeronautics and Space Administration — This project seeks to design, fabricate, characterize and commercialize large area, uncooled and radiative hard 4H-SiC EUV ? soft X-ray detectors capable of ultra...

Directions of development for areas with unfavourable conditions for agricultural production, an example of the podlaskie voivodeship (Poland

Directory of Open Access Journals (Sweden)

Kazimierz Niewiadomski

2012-01-01

Full Text Available This paper is dedicated to the directions of development of rural areas, primarily agricultural areas of the Podlaskie voivodeship, which in light of current criteria has been qualified almost entirely as problem area (ONW. Results presented are culmination of research related to issues of problem areas primarily in the area of the Podlaskie voivodeship by the author of the herewith paper during last few years. In conclusion to the results of the research it can be said that the primary direction of the development of rural areas in the Podlaskie voivodeship will be modern, large-scale farms able to adjust to current conditions, in particular environmental and soil conditions. In problem areas these will be mostly farms focusing on production of cattle and milk, developing production based on very high share of grassland areas. Complementary role in relation to conventional agriculture will be fulfilled by farms developing organic farming and agro-touristic farms. More intensive development of conventional tourism in rural areas can be expected once new tourism products and services have been developed. Assessment of the current economic development parameters of the Podlaskie voivodeship does not point at the convergence with other regions and possibility of decreasing the distance between the Podlaskie voivodeship and average results for Poland in the near future. However, some positive trends in terms of convergence with other regions in Poland can be observed in agriculture, primarily due to relatively good results in production of cattle and milk.

77 FR 24253 - Public Notice for Waiver of Aeronautical Land-Use Assurance; Marshfield Municipal Airport...

Science.gov (United States)

2012-04-23

... Aeronautical Land-Use Assurance; Marshfield Municipal Airport, Marshfield, WI AGENCY: Federal Aviation... the Marshfield Municipal Airport, Marshfield WI. The WisDOT issued a Categorical Exclusion for the... disposal of the subject airport property nor a determination of eligibility for grant-in-aid funding from...

76 FR 76810 - Public Notice for Waiver of Aeronautical Land-Use Assurance; Austin Straubel International...

Science.gov (United States)

2011-12-08

... Aeronautical Land-Use Assurance; Austin Straubel International Airport, Green Bay, WI AGENCY: Federal Aviation... the Austin Straubel International Airport, Green Bay, WI. Brown County, as sponsor of the airport, is... located on, or adjacent to, Austin Straubel International Airport. One parcel contains a roadway section...

Arc tracking energy balance for copper and aluminum aeronautic cables

International Nuclear Information System (INIS)

André, T; Valensi, F; Teulet, P; Cressault, Y; Zink, T; Caussé, R

2017-01-01

Arc tracking tests have been carried out between two voluntarily damaged aeronautic cables. Copper or aluminum conductors have been exposed to short circuits under alternating current. Various data have been recorded (arc voltage and current, radiated power and ablated mass), enabling to determine a power balance, in which every contribution is estimated. The total power is mainly transferred to the cables (between 50 and 65%, depending on the current and the cable type), and causes the melting and partial vaporization of the metallic core and insulating material, or is conducted or radiated. The other part is deposited into the arc column, being either radiated, convected or conducted. (paper)

Measurement of Interfacial Area Production and Permeability within Porous Media

International Nuclear Information System (INIS)

Crandall, Dustin; Ahmadi, Goodarz; Smith, Duane H.

2010-01-01

An understanding of the pore-level interactions that affect multi-phase flow in porous media is important in many subsurface engineering applications, including enhanced oil recovery, remediation of dense non-aqueous liquid contaminated sites, and geologic CO 2 sequestration. Standard models of two-phase flow in porous media have been shown to have several shortcomings, which might partially be overcome using a recently developed model based on thermodynamic principles that includes interfacial area as an additional parameter. A few static experimental studies have been previously performed, which allowed the determination of static parameters of the model, but no information exists concerning the interfacial area dynamic parameters. A new experimental porous flow cell that was constructed using stereolithography for two-phase gas-liquid flow studies was used in conjunction with an in-house analysis code to provide information on dynamic evolution of both fluid phases and gas-liquid interfaces. In this paper, we give a brief introduction to the new generalized model of two-phase flow model and describe how the stereolithography flow cell experimental setup was used to obtain the dynamic parameters for the interfacial area numerical model. In particular, the methods used to determine the interfacial area permeability and production terms are shown.

A Printable Silicon Nano-Field Effect Transistor with High Operating Frequency for Large-Area Deployable Active Phased-Array Antennas, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — Flexible electronic circuits can be easily integrated with large area (>10m aperture), inflatable antennas to provide distributed control and processing...

Quantitative determination and sampling of azathioprine residues for cleaning validation in production area.

Science.gov (United States)

Fazio, Tatiana Tatit; Singh, Anil Kumar; Kedor-Hackmann, Erika Rosa Maria; Santoro, Maria Inês Rocha Miritello

2007-03-12

Cleaning validation is an integral part of current good manufacturing practices in any pharmaceutical industry. Nowadays, azathioprine and several other pharmacologically potent pharmaceuticals are manufactured in same production area. Carefully designed cleaning validation and its evaluation can ensure that residues of azathioprine will not carry over and cross contaminate the subsequent product. The aim of this study was to validate simple analytical method for verification of residual azathioprine in equipments used in the production area and to confirm efficiency of cleaning procedure. The HPLC method was validated on a LC system using Nova-Pak C18 (3.9 mm x 150 mm, 4 microm) and methanol-water-acetic acid (20:80:1, v/v/v) as mobile phase at a flow rate of 1.0 mL min(-1). UV detection was made at 280 nm. The calibration curve was linear over a concentration range from 2.0 to 22.0 microg mL(-1) with a correlation coefficient of 0.9998. The detection limit (DL) and quantitation limit (QL) were 0.09 and 0.29 microg mL(-1), respectively. The intra-day and inter-day precision expressed as relative standard deviation (R.S.D.) were below 2.0%. The mean recovery of method was 99.19%. The mean extraction-recovery from manufacturing equipments was 83.5%. The developed UV spectrophotometric method could only be used as limit method to qualify or reject cleaning procedure in production area. Nevertheless, the simplicity of spectrophotometric method makes it useful for routine analysis of azathioprine residues on cleaned surface and as an alternative to proposed HPLC method.

Brazilian university patents: profile of inventors and production per knowledge area

Directory of Open Access Journals (Sweden)

Adriana Stefani Cativelli

2016-09-01

Full Text Available http://dx.doi.org/10.5007/1518-2924.2016v21n47p67 The study characterizes the inventions of patents of Brazilian universities concerning authorship and subject area to identify the institutions’ possible departments and areas that concentrate efforts on or are more easily able to produce and achieve the patent grants in Brazil. For the data collection of the universities, we used the E-mec platform; the database of the National Institute of Industrial Property (INPI for the collection of information concerning patents; and the International Patent Classification (IPC to determine the covered knowledge areas. Thus, we analyzed the production of patents by Brazilian region; the universities with patents granted; the number of inventors per patent; the profile of the main inventors; and the patents granted according to the IPC. The results indicate that the characteristics of the patents granted to Brazilian Public Universities belong predominantly to the areas of Chemistry and Metallurgy. They are developed by professors with graduation in Chemistry or Mechanical Engineering and most of them belong to the State University of Campinas.

75 FR 52819 - Public Notice for Waiver of Aeronautical Land-Use Assurance; Rickenbacker International Airport...

Science.gov (United States)

2010-08-27

...-aid funding from the FAA. The disposition of proceeds from the disposal of the airport property will... Municipal Airport Authority by deed of record in Official Record 514, Page 2561, (all references are to the... Aeronautical Land-Use Assurance; Rickenbacker International Airport, Columbus, OH AGENCY: Federal Aviation...

76 FR 65472 - Review of Foreign Ownership Policies for Common Carrier and Aeronautical Radio Licensees

Science.gov (United States)

2011-10-21

... for investment by foreign individuals, corporations, and governments in U.S.-organized entities that... before direct or indirect foreign ownership of their U.S. parent companies exceeds 25 percent. 5. In the... permitting greater investment in U.S. common carrier and aeronautical radio licensees by foreign individuals...

MISR L2 TOA/Cloud Stereo Product subset for the ICARTT region V002

Data.gov (United States)

National Aeronautics and Space Administration — MISR Level 2 TOA/Cloud Stereo Product containing the Stereoscopically Derived Cloud Mask (SDCM), cloud winds, Reflecting Level Reference Altitude (RLRA), with...

Land substitution effects of biofuel side products and implications on the land area requirement for EU 2020 biofuel targets

International Nuclear Information System (INIS)

Ozdemir, Enver Doruk; Haerdtlein, Marlies; Eltrop, Ludger

2009-01-01

The provision of biofuels today is based on energy crops rather than residual biomass, which results in the requirement of agricultural land area. The side products may serve as animal feed and thus prevent cultivation of other feedstock and the use of corresponding land area. These effects of biofuel provision have to be taken into account for a comprising assessment of land area requirement for biofuel provision. Between 18.5 and 21.1 Mio. hectares (ha) of land area is needed to meet the EU 2020 biofuel target depending on the biofuel portfolio when substitution effects are neglected. The utilization of the bioethanol side products distiller's dried grain and solubles (DDGS) and pressed beet slices may save up to 0.7 Mio. ha of maize cultivation area in the EU. The substitution effect due to the utilization of biodiesel side products (oil cakes of rape, palm and soy) as animal feed may account for up to 7.1 Mio. ha of soy cultivation area in Brazil. The results show that the substitution of land area due to use of side products might ease the pressures on land area requirement considerably and should therefore not be neglected in assessing the impacts of biofuel provision worldwide.

Household use of insecticide consumer products in a dengue-endemic area in México.

Science.gov (United States)

Loroño-Pino, María Alba; Chan-Dzul, Yamili N; Zapata-Gil, Rocio; Carrillo-Solís, Claudia; Uitz-Mena, Ana; García-Rejón, Julián E; Keefe, Thomas J; Beaty, Barry J; Eisen, Lars

2014-10-01

To evaluate the household use of insecticide consumer products to kill mosquitoes and other insect pests, as well as the expenditures for using these products, in a dengue-endemic area of México. A questionnaire was administered to 441 households in Mérida City and other communities in Yucatán to assess household use of insecticide consumer products. A total of 86.6% of surveyed households took action to kill insect pests with consumer products. The most commonly used product types were insecticide aerosol spray cans (73.6%), electric plug-in insecticide emitters (37.4%) and mosquito coils (28.3%). Mosquitoes were targeted by 89.7% of households using insecticide aerosol spray cans and >99% of households using electric plug-in insecticide emitters or mosquito coils. Products were used daily or every 2 days in most of the households for insecticide aerosol spray cans (61.4%), electric plug-in insecticide emitters (76.2%) and mosquito coils (82.1%). For all products used to kill insect pests, the median annual estimated expenditure per household that took action was 408 Mexican pesos ($MXN), which corresponded to approximately 31 $US. These numbers are suggestive of an annual market in excess of 75 million $MXN (>5.7 million $US) for Mérida City alone. Mosquitoes threaten human health and are major nuisances in homes in the study area in México. Households were found to have taken vigorous action to kill mosquitoes and other insect pests and spent substantial amounts of money on insecticide consumer products. © 2014 John Wiley & Sons Ltd.

Statistical Analysis of Long-Term Trend of Performance, Production and Cultivated Area of 17 Field Crops Khorasan Razavi Province

Directory of Open Access Journals (Sweden)

H. Zareabyaneh

2014-12-01

Full Text Available Any planning for the future requires estimates of future conditions. It is possible to study changes over time series. In this study, changes of production and cultivated area of 17 field crops of Khorasan Razavi province in a 25-year period were determined with Mann - Kendall test, Sen’s Estimator Slope and linear regression. Analysis of the three tests showed that performance of 76.5% from yield, 88.2% from area under cultivation and 55.8% from agricultural production were significant at the 0.01 and 0.05 level. On the other hand, trend of yields 58.8% was increase, 17.7% was reduced and 23.5% was no significant trend. Similarly, trend of 23.5% from area under cultivation was acreage, 64.7% was reduction, and 11.8% was no significant trend. For production variable, 29.4% was significantly increased and 29.4% was significant reduction. More detailed analysis showed that performance, production and area under cultivation of three crops of cotton, grain and tomatoes increased significantly. Results of all three methods showed the highest trend of negatively performance and area under cultivation variation is related to pea and melon respectively. Furthermore, most of the positive trend in production of tomatoes and grain, performance in onions, potatoes and tomatoes and area under cultivation in tomato observed. The results showed that linear trend and the nonparametric tests of important products of province: wheat, barley, sugar beet, cotton, melons, watermelons and tomatoes in 0.01 were significant. This result shows the importance of these yields in gross state province product.

47 CFR 25.216 - Limits on emissions from mobile earth stations for protection of aeronautical radionavigation...

Science.gov (United States)

2010-10-01

... 47 Telecommunication 2 2010-10-01 2010-10-01 false Limits on emissions from mobile earth stations for protection of aeronautical radionavigation-satellite service. 25.216 Section 25.216 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) COMMON CARRIER SERVICES SATELLITE COMMUNICATIONS...

A real-time regional adaptive exposure method for saving dose-area product in x-ray fluoroscopy

International Nuclear Information System (INIS)

Burion, Steve; Funk, Tobias; Speidel, Michael A.

2013-01-01

Purpose: Reduction of radiation dose in x-ray imaging has been recognized as a high priority in the medical community. Here the authors show that a regional adaptive exposure method can reduce dose-area product (DAP) in x-ray fluoroscopy. The authors' method is particularly geared toward providing dose savings for the pediatric population. Methods: The scanning beam digital x-ray system uses a large-area x-ray source with 8000 focal spots in combination with a small photon-counting detector. An imaging frame is obtained by acquiring and reconstructing up to 8000 detector images, each viewing only a small portion of the patient. Regional adaptive exposure was implemented by varying the exposure of the detector images depending on the local opacity of the object. A family of phantoms ranging in size from infant to obese adult was imaged in anteroposterior view with and without adaptive exposure. The DAP delivered to each phantom was measured in each case, and noise performance was compared by generating noise arrays to represent regional noise in the images. These noise arrays were generated by dividing the image into regions of about 6 mm 2 , calculating the relative noise in each region, and placing the relative noise value of each region in a one-dimensional array (noise array) sorted from highest to lowest. Dose-area product savings were calculated as the difference between the ratio of DAP with adaptive exposure to DAP without adaptive exposure. The authors modified this value by a correction factor that matches the noise arrays where relative noise is the highest to report a final dose-area product savings. Results: The average dose-area product saving across the phantom family was (42 ± 8)% with the highest dose-area product saving in the child-sized phantom (50%) and the lowest in the phantom mimicking an obese adult (23%). Conclusions: Phantom measurements indicate that a regional adaptive exposure method can produce large DAP savings without compromising

Profile of software engineering within the National Aeronautics and Space Administration (NASA)

Science.gov (United States)

Sinclair, Craig C.; Jeletic, Kellyann F.

1994-01-01

This paper presents findings of baselining activities being performed to characterize software practices within the National Aeronautics and Space Administration. It describes how such baseline findings might be used to focus software process improvement activities. Finally, based on the findings to date, it presents specific recommendations in focusing future NASA software process improvement efforts. The findings presented in this paper are based on data gathered and analyzed to date. As such, the quantitative data presented in this paper are preliminary in nature.

The thorium alloys in aeronautics: from material analysis to regulation application; Les alliages thories de l'aeronautique: de l'analyse du materiel a l'application de la reglementation

Energy Technology Data Exchange (ETDEWEB)

Laroche, P.; Cazoulat, A.; Gerasimo, P. [Sce de Protection Radiologique des Armees, 92 - Clamart (France)

1999-07-01

The thorium handled in aeronautics is a mixing in variable proportion of different thorium isotopes and its daughter products, but the regulation considers only two alpha emitters (Th-232 and Th-228): the thorium being considered as a natural radioactive substance, the legislation and the activities authorised are less restrictive than for artificial elements, it is a paradoxical situation because the thorium has the annual limit of intake the lowest of the regulation. (N.C.)

College of Engineering alumnus honored with American Institute of Aeronautics and Astronautics Abe M. Zarem Award

OpenAIRE

Nystrom, Lynn A.

2009-01-01

Adam Cowling, a recent master's graduate of Virginia Tech's Aerospace and Ocean Engineering Department in the College of Engineering, is the 2009 recipient of the American Institute of Aeronautics and Astronautics (AIAA) Abe M. Zarem Award for Distinguished Achievement in Astronautics.

78 FR 6401 - Public Notice for Release of Aeronautical Property at the Wilkes-Barre/Scranton International...

Science.gov (United States)

2013-01-30

... listed above. SUPPLEMENTARY INFORMATION: The FAA invites public comment on the release of land and right... DEPARTMENT OF TRANSPORTATION Federal Aviation Administration Public Notice for Release of Aeronautical Property at the Wilkes- Barre/Scranton International Airport (AVP), Avoca, PA AGENCY: Federal...

Polyaniline electrosynthesis on composite surface carbon fiber-epoxy Aeronautic application

International Nuclear Information System (INIS)

Sanches, Richelmy Magi; Batista, Aline Fontana; Gama, Adriana Medeiros; Goncalves, Emerson Sarmento

2016-01-01

Full text: This work aims to obtain polyaniline (PAni) by electro synthesis, as thin layers on carbon fiber/epoxy composite surface, to attenuate microwave amplitude and so decrease radar cross section (RCS) on drone surfaces. In order to it, two procedures were used to obtain polyaniline on surface from aniline 0,5 mol L -1 and H 2 SO 4 1,0 mol L -1 , using cyclic voltammetry, from -0,50 up to 1,05 V x Ag/AgCl, using auxiliary electrode of Pt, by potentiostat-galvanostat Autolab PGSTAT 302. The first used 26 cycles to a sample and 53 cycles to another sample, at 25mVs -1 . The second differs to the first in to use 3 beginning cycles at 5mVs -1 and remaining cycles at 100 mVs -1 , obtaining two samples, similar to first treatment, with 26 and 53 cycles, at end. Processes temperature was 0°C. These procedures resulted in two different materials of PAni, evaluated in function of scanning velocity and variation on cycle numbers used. Resulting new composites were characterized scanning electronic microscopy (SEM), X-ray diffraction (XRD), electrochemical impedance spectroscopy (EIS), electromagnetic measures in waveguide of intrinsic properties, scattering parameters and reflectivity on frequency range from 8,0 up to 12,0 GHz To verify applicability on aeronautics electromagnetic shields, computing sources were used, through numeric simulations to determine RCS of objects, overlapping concepts of geometric interactions with material properties applied on their surfaces, added with interception of microwaves emitted by hypothetical radars. To this end, software Computer Simulation Technology-(CST) was used, through which efficacy of composite PAni@carbon fiber@epoxy was indicated to aeronautic application in Stealth technology. (author)

Polyaniline electrosynthesis on composite surface carbon fiber-epoxy Aeronautic application

Energy Technology Data Exchange (ETDEWEB)

Sanches, Richelmy Magi; Batista, Aline Fontana; Gama, Adriana Medeiros; Goncalves, Emerson Sarmento, E-mail: rms.aero94@gmail.com [Instituto de Aeronautica e Espaco (IAE), Sao Jose dos Campos, SP (Brazil). Lab. de Caracterizacao Fisico-Quimica; Quirino, Sandro Fonseca; Baldan, Mauricio Ribeiro [Instituto Nacional de Pesquisas Espaciais (INPE), Sao Jose dos Campos, SP (Brazil)

2016-07-01

Full text: This work aims to obtain polyaniline (PAni) by electro synthesis, as thin layers on carbon fiber/epoxy composite surface, to attenuate microwave amplitude and so decrease radar cross section (RCS) on drone surfaces. In order to it, two procedures were used to obtain polyaniline on surface from aniline 0,5 mol L{sup -1} and H{sub 2}SO{sub 4} 1,0 mol L{sup -1}, using cyclic voltammetry, from -0,50 up to 1,05 V x Ag/AgCl, using auxiliary electrode of Pt, by potentiostat-galvanostat Autolab PGSTAT 302. The first used 26 cycles to a sample and 53 cycles to another sample, at 25mVs{sup -1}. The second differs to the first in to use 3 beginning cycles at 5mVs{sup -1} and remaining cycles at 100 mVs{sup -1}, obtaining two samples, similar to first treatment, with 26 and 53 cycles, at end. Processes temperature was 0°C. These procedures resulted in two different materials of PAni, evaluated in function of scanning velocity and variation on cycle numbers used. Resulting new composites were characterized scanning electronic microscopy (SEM), X-ray diffraction (XRD), electrochemical impedance spectroscopy (EIS), electromagnetic measures in waveguide of intrinsic properties, scattering parameters and reflectivity on frequency range from 8,0 up to 12,0 GHz To verify applicability on aeronautics electromagnetic shields, computing sources were used, through numeric simulations to determine RCS of objects, overlapping concepts of geometric interactions with material properties applied on their surfaces, added with interception of microwaves emitted by hypothetical radars. To this end, software Computer Simulation Technology-(CST) was used, through which efficacy of composite PAni@carbon fiber@epoxy was indicated to aeronautic application in Stealth technology. (author)

RSS SSMIS OCEAN PRODUCT GRIDS DAILY FROM DMSP F17 NETCDF V7

Data.gov (United States)

National Aeronautics and Space Administration — This dataset is part of the collection of Special Sensor Microwave/Imager (SSM/I) and Special Sensor Microwave Imager Sounder (SSMIS) data products produced as part...

Printable Nano-Field Effect Transistors Combined with Carbon Nanotube Based Printable Interconnect Wires for Large-Area Deployable Active Phased-Array, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — Flexible electronic circuits can be easily integrated with large area (>10m aperture), inflatable antennas to provide distributed control and processing...

Identification and Analysis of Future Aeronautical Communications Candidates: A Study of Concepts and Technologies to Support the Aeronautical Communications Needs in the NextGen and Beyond National Airspace System

Science.gov (United States)

Wichgers, Joel M.; Mitchell, James P.

2015-01-01

This report describes the results of future aeronautical communications research conducted by Rockwell Collins employees under NRA contract to NASA. The overall goal of this research was to identify and begin to evaluate communication technology candidates expected to meet the long-term aircraft-to-aircraft and aircraft-to-ground data communications needs of Air Traffic Management in the NextGen and beyond National Airspace System (NAS), considering how the NAS and communications technologies will evolve during a 50-year modernization time horizon.

77 FR 2343 - Eighteenth Meeting: RTCA Special Committee 216: Aeronautical Systems Security (Joint Meeting With...

Science.gov (United States)

2012-01-17

... advise the public of the eighteenth meeting of RTCA Special Committee 216: Aeronautical Systems Security... Agenda Overview and Approval Split Plenary Session (9:15 a.m.--12 p.m.) SC 216 Review of the Summary of....--12 p.m.) WG-72 Introduction, Report about publications and relations EUROCAE Document Discussions, e...

Quality Assurance in Large Scale Online Course Production

Science.gov (United States)

Holsombach-Ebner, Cinda

2013-01-01

The course design and development process (often referred to here as the "production process") at Embry-Riddle Aeronautical University (ERAU-Worldwide) aims to produce turnkey style courses to be taught by a highly-qualified pool of over 800 instructors. Given the high number of online courses and tremendous number of live sections…

The AreA transcription factor in Fusarium graminearum regulates the use of some nonpreferred nitrogen sources and secondary metabolite production.

Science.gov (United States)

Giese, Henriette; Sondergaard, Teis Esben; Sørensen, Jens Laurids

2013-01-01

Growth conditions are known to affect the production of secondary metabolites in filamentous fungi. The influence of different nitrogen sources and the transcription factor AreA on the production of mycotoxins in Fusarium graminearum was examined. Growth on glutamine or NH4-sources was poor and asparagine was found to be a preferential nitrogen source for F. graminearum. Deletion of areA led to poor growth on NaNO₃ suggesting its involvement in regulation of the nitrate reduction process. In addition utilization of aspartic acid, histidine, isoleucine, leucine, threonine, tyrosine, and valine as nitrogen sources was shown to depend of a functional AreA. AreA was shown to be required for the production of the mycotoxins deoxynivalenol (DON), zearalenone, and fusarielin H regardless of the nutrient medium. Deletion of nmr, the repressor of AreA under nitrogen sufficient conditions, had little effect on either growth or toxin production. AreA appears to regulate production of some mycotoxins directly or indirectly independent on nitrogen status and plays a role in utilization of certain amino acids. Copyright © 2013 The British Mycological Society. All rights reserved.

A Portfolio Analysis Tool for Measuring NASAs Aeronautics Research Progress toward Planned Strategic Outcomes

Science.gov (United States)

Tahmasebi, Farhad; Pearce, Robert

2016-01-01

Description of a tool for portfolio analysis of NASA's Aeronautics research progress toward planned community strategic Outcomes is presented. The strategic planning process for determining the community Outcomes is also briefly described. Stakeholder buy-in, partnership performance, progress of supporting Technical Challenges, and enablement forecast are used as the criteria for evaluating progress toward Outcomes. A few illustrative examples are also presented.

Household use of insecticide consumer products in a dengue endemic area in México

Science.gov (United States)

Loroño-Pino, María Alba; Chan-Dzul, Yamili N.; Zapata-Gil, Rocio; Carrillo-Solís, Claudia; Uitz-Mena, Ana; García-Rejón, Julián E.; Keefe, Thomas J.; Beaty, Barry J.; Eisen, Lars

2014-01-01

Objectives To evaluate household use of insecticide consumer products to kill mosquitoes and other insect pests, as well as the expenditures for using these products, in a dengue endemic area in México. Methods A questionnaire was administered to 441 households in Mérida City or other communities in Yucatán State to assess household use of insecticide consumer products. Results Most (86.6%) households took action to kill insect pests with consumer products. Among those households, the most commonly used product types were insecticide aerosol spray cans (73.6%), electric plug-in insecticide emitters (37.4%), and mosquito coils (28.3%). Mosquitoes were targeted by 89.7% of households using insecticide aerosol spray cans and >99% of households using electric plug-in insecticide emitters or mosquito coils. During the part of the year when a given product type was used, the frequency of use was daily or every 2 days in most of the households for insecticide aerosol spray cans (61.4%), electric plug-in insecticide emitters (76.2%), and mosquito coils (82.1%). For all products used to kill insect pests, the median annual estimated expenditure per household that took action was 408 Mexican pesos ($MXN), which corresponded to ∼31 $U.S. These numbers are suggestive of an annual market in excess of 75 million $MXN (>5.7 million $U.S.) for Mérida City alone. Conclusion Mosquitoes threaten human health and are major nuisances in homes in the study area in México. Households were found to have taken vigorous action to kill mosquitoes and other insect pests and spent substantial amounts of money on insecticide consumer products. PMID:25040259

Intercomparison of different operational oceanographic forecast products in the CMEMS IBI area

Science.gov (United States)

Lorente, Pablo; Sotillo, Marcos G.; Dabrowski, Tomasz; Amo-Baladrón, Arancha; Aznar, Roland; De Pascual, Alvaro; Levier, Bruno; Bowyer, Peter; Cossarini, Gianpiero; Salon, Stefano; Tonani, Marina; Alvarez-Fanjul, Enrique

2017-04-01

The development of skill assessment software packages and dedicated web applications is a relatively novel theme in operational oceanography. Within the CMEMS IBI-MFC, the quality of IBI (Iberia-Biscay-Ireland) forecast products is assessed by means of NARVAL (North Atlantic Regional VALidation) web-based tool. The validation of IBI against independent in situ and remote-sensing measurements is routinely conducted to evaluate model's veracity and prognostic capabilities. Noticeable efforts are in progress to define meaningful skill scores and statistical metrics to quantitatively assess the quality and reliability of the IBI model solution. Likewise, the IBI-MFC compares the IBI forecast products with other model solutions by setting up specific intercomparison exercises on overlapping areas at diverse timescales. In this context, NARVAL web tool already includes a specific module to evaluate strengths and weaknesses of IBI versus other CMEMS operational ocean forecasting systems (OOFSs). In particular, the IBI physical ocean solution is compared against the CMEMS MED and NWS OOFSs. These CMEMS regional services delivered for the Mediterranean and the North West Shelves include data assimilation schemes in their respective operational chains and generate analogous ocean forecast products to the IBI ones. A number of physical parameters (i.e. sea surface temperature, salinity and current velocities) are evaluated through NARVAL on a daily basis in the overlapping areas existing between these three regional systems. NARVAL is currently being updated in order to extend this intercomparison of ocean model parameters to the biogeochemical solutions provided by the aforementioned OOFSs. More specifically, the simulated chlorophyll concentration is evaluated over several subregions of particular concern by using as benchmark the CMEMS satellite-derived observational products. In addition to this IBI comparison against other regional CMEMS products on overlapping areas, a

The relationship between risk factors and aeronautical decision making in the flight training environment

Science.gov (United States)

Wetmore, Michael J.

The purpose of this applied dissertation was to investigate the relationship between risk factors and aeronautical decision making in the flight training environment using a quantitative, non-experimental, ex post facto research design. All 75 of the flight training accidents that involved a fatality from the years 2001-2003 were selected for study from the National Transportation Safety Board (NTSB) aviation accident database. Objective evidence from the Factual Reports was used to construct accident chains and to code and quantify total risk factors and total poor aeronautical decisions. The data were processed using correlational statistical tests at the 1% significance level. There was a statistically significant relationship between total risk factors per flight and poor decisions per flight. Liveware risks were the most prevalent risk factor category. More poor decisions were made during preflight than any other phase of flight. Pilots who made multiple poor decisions per flight had significantly higher risk factors per flight. A risk factor threat to decision making chart is presented for use by flight instructors and/or flight training organizations. The main threat to validity of this study was the NTSB accident investigation team investigative equality assumption.

RSS SSM/I OCEAN PRODUCT GRIDS DAILY FROM DMSP F11 NETCDF V7

Data.gov (United States)

National Aeronautics and Space Administration — This dataset is part of the collection of Special Sensor Microwave/Imager (SSM/I) and Special Sensor Microwave Imager Sounder (SSMIS) data products produced as part...

RSS SSMIS OCEAN PRODUCT GRIDS DAILY FROM DMSP F17 NETCDF V7

Data.gov (United States)

National Aeronautics and Space Administration — The RSS SSMIS Ocean Product Grids Daily from DMSP F17 netCDF dataset is part of the collection of Special Sensor Microwave/Imager (SSM/I) and Special Sensor...

RSS SSMIS OCEAN PRODUCT GRIDS DAILY FROM DMSP F16 NETCDF V7

Data.gov (United States)

National Aeronautics and Space Administration — The RSS SSMIS Ocean Product Grids Daily from DMSP F16 netCDF dataset is part of the collection of Special Sensor Microwave/Imager (SSM/I) and Special Sensor...

Satellite remote sensing for estimating leaf area index, FPAR and primary production. A literature review

International Nuclear Information System (INIS)

Boresjoe Bronge, Laine

2004-03-01

Land vegetation is a critical component of several biogeochemical cycles that have become the focus of concerted international research effort. Most ecosystem productivity models, carbon budget models, and global models of climate, hydrology and biogeochemistry require vegetation parameters to calculate land surface photosynthesis, evapotranspiration and net primary production. Therefore, accurate estimates of vegetation parameters are increasingly important in the carbon cycle, the energy balance and in environmental impact assessment studies. The possibility of quantitatively estimating vegetation parameters of importance in this context using satellite data has been explored by numerous papers dealing with the subject. This report gives a summary of the present status and applicability of satellite remote sensing for estimating vegetation productivity by using vegetation index for calculating leaf area index (LAI) and fraction of absorbed photosynthetically active radiation (FPAR). Some possible approaches for use of satellite data for estimating LAI, FPAR and net primary production (NPP) on a local scale are suggested. Recommendations for continued work in the Forsmark and Oskarshamn investigation areas, where vegetation data and NDVI-images based on satellite data have been produced, are also given

Satellite remote sensing for estimating leaf area index, FPAR and primary production. A literature review

Energy Technology Data Exchange (ETDEWEB)

Boresjoe Bronge, Laine [SwedPower AB, Stockholm (Sweden)

2004-03-01

Land vegetation is a critical component of several biogeochemical cycles that have become the focus of concerted international research effort. Most ecosystem productivity models, carbon budget models, and global models of climate, hydrology and biogeochemistry require vegetation parameters to calculate land surface photosynthesis, evapotranspiration and net primary production. Therefore, accurate estimates of vegetation parameters are increasingly important in the carbon cycle, the energy balance and in environmental impact assessment studies. The possibility of quantitatively estimating vegetation parameters of importance in this context using satellite data has been explored by numerous papers dealing with the subject. This report gives a summary of the present status and applicability of satellite remote sensing for estimating vegetation productivity by using vegetation index for calculating leaf area index (LAI) and fraction of absorbed photosynthetically active radiation (FPAR). Some possible approaches for use of satellite data for estimating LAI, FPAR and net primary production (NPP) on a local scale are suggested. Recommendations for continued work in the Forsmark and Oskarshamn investigation areas, where vegetation data and NDVI-images based on satellite data have been produced, are also given.

Flammability limits: A review with emphasis on ethanol for aeronautical applications and description of the experimental procedure

International Nuclear Information System (INIS)

Coronado, Christian J.R.; Carvalho, João A.; Andrade, José C.; Cortez, Ely V.; Carvalho, Felipe S.; Santos, José C.; Mendiburu, Andrés Z.

2012-01-01

Highlights: ► Develops a comprehensive literature review on ethanol flammability limits. ► Difference in standard procedures lead to different experimental values of the flammability limits. ► Methodology for experiments to find the FL's of ethanol for aeronautical applications. - Abstract: The lower and upper flammability limits of a fuel are key tools for predicting fire, assessing the possibility of explosion, and designing protection systems. Knowledge about the risks involved with the explosion of both gaseous and vaporized liquid fuel mixtures with air is very important to guarantee safety in industrial, domestic, and aeronautical applications. Currently, most countries use various standard experimental tests, which lead to different experimental values for these limits. A comprehensive literature review of the flammability limits of combustible mixtures is developed here in order to organize the theoretical and practical knowledge of the subject. The main focus of this paper is the review of the flammability data of ethanol–air mixtures available in the literature. In addition, the description of methodology for experiments to find the upper and lower limits of flammability of ethanol for aeronautical applications is discussed. A heated spherical 20 L vessel was used. The mixtures were ignited with electrode rods placed in the center of the vessel, and the spark gap was 6.4 mm. LFL and the UFL were determined for ethanol (hydrated ethanol 96% °INPM) as functions of temperature for atmospheric pressure to compare results with data published in the scientific literature.

Electromagnetic Compatibility Studies: LTE BS vs. Aeronautical Radionavigation Services in 694-790 MHz Frequency Band

Directory of Open Access Journals (Sweden)

Stankevičius Evaldas

2014-10-01

Full Text Available This paper presents the sharing analysis of the 694–790 MHz frequency band for Mobile services IMT and Aeronautical radio-navigation services (ARNS using SEAMCAT (established by CEPT software based on the statistical simulation (Monte-Carlo method. In 2012 the World Radiocommunication Conference (WRC-12 decided to allocate the 694–790 MHz frequency band (the so-called 700 MHz band to mobile services IMT (excluding aeronautical mobile after WRC-15 conference. But this agreement raises electromagnetic compatibility problems, which should be solved until WRC-15 [1]. This study was carried out in two phases: first applying theoretical analysis, then statistical Monte-Carlo simulations with SEAMCAT software tool in order to verify results obtained in theoretical approach. Analytical calculations shows that the required protection distances between ARNS stations and the MS base stations are 132 km. The obtained results from SEAMCAT simulations indicate that separation distance should be above 100 km. These results illustrate that the systems are not electromagnetically compatible. The possible mitigation technic could be antenna pattern correction.

Effects of Climate Change on Global Food Production from SRES Emissions and Socioeconomic Scenarios

Data.gov (United States)

National Aeronautics and Space Administration — Effects of Climate Change on Global Food Production from SRES Emissions and Socioeconomic Scenarios is an update to a major crop modeling study by the NASA Goddard...

Expansion of Sugarcane area for Ethanol production in Brazil: a Threat to Food Production and Environmental Sustainability?

Science.gov (United States)

Monteiro, J. M.; Coutinho, H. L.; Veiga, L. B.

2012-12-01

The raise in fossil fuels prices and the increase in Greenhouse Gas emissions is leading nations to adopt non-fossil fuels based energy sources. Sugarcane crops for biofuel production are expanding fast in Brazil, mainly through land use change (LUC) processes, in substitution of pasturelands and grain crops plantations. Would these changes affect negatively sustainability assessments of bioethanol production in the future? We estimate the extent of sugarcane cropland needed to produce sufficient ethanol to attend to market demands. This work presents a baseline scenario for sugarcane cropping area in Brazil in 2017, taking into account market forces (supply and demand). We also comment on a policy instrument targetting sustainable sugarcane production in Brazil. The expansion scenarios took into account the demand for ethanol from 2008-2017, produced by the Energy Research Corporation, of Brazil. In order to develop the expansion scenario, we estimated the amount of sugarcane needed to attend the ethanol demand. We then calculated the area needed to generate that amount of sugarcane. The analytical parameters were: 1) one tonne of sugarcane produces an average 81.6 liters of ethanol; 2) the average sugarcane crop productivity varied linearly from 81.4 tons/hectare in 2008 to 86.2 tons/hectare in 2017. We also assumed that sugarcane productivity in 2017 as the current average productivity of sugarcane in the State of São Paulo. The results show that the requirement for 3.5 million ha in 2007 will increase to 9 million ha in 2017. The Sugarcane Agroecologic Zoning (ZAECANA), published by Embrapa (2009), is a tool that not only informs the territory occupation and use policies, but also classifies land as qualified, restricted or non-qualified for the plantation of sugarcane crops. The ZAECANA is based on soil and climate suitability assessments, and is presented in a spatially-explicit format. Adopting the precautionary principle, a national policy was established

Examining the roles that changing harvested areas, closing yield-gaps, and increasing yield ceilings have had on crop production

Science.gov (United States)

Johnston, M.; Ray, D. K.; Mueller, N. D.; Foley, J. A.

2011-12-01

With an increasing and increasingly affluent population, there has been tremendous effort to examine strategies for sustainably increasing agricultural production to meet this surging global demand. Before developing new solutions from scratch, though, we believe it is important to consult our recent agricultural history to see where and how agricultural production changes have already taken place. By utilizing the newly created temporal M3 cropland datasets, we can for the first time examine gridded agricultural yields and area, both spatially and temporally. This research explores the historical drivers of agricultural production changes, from 1965-2005. The results will be presented spatially at the global-level (5-min resolution), as well as at the individual country-level. The primary research components of this study are presented below, including the general methodology utilized in each phase and preliminary results for soybean where available. The complete assessment will cover maize, wheat, rice, soybean, and sugarcane, and will include country-specific analysis for over 200 countries, states, territories and protectorates. Phase 1: The first component of our research isolates changes in agricultural production due to variation in planting decisions (harvested area) from changes in production due to intensification efforts (yield). We examine area/yield changes at the pixel-level over 5-year time-steps to determine how much each component has contributed to overall changes in production. Our results include both spatial patterns of changes in production, as well as spatial maps illustrating to what degree the production change is attributed to area and/or yield. Together, these maps illustrate where, why, and by how much agricultural production has changed over time. Phase 2: In the second phase of our research we attempt to determine the impact that area and yield changes have had on agricultural production at the country-level. We calculate a production

Constraints and opportunities for sustainable crop production in rainfed areas of pothwar plateau

International Nuclear Information System (INIS)

Ghafoor, A.; Shafiq, M.; Aslam, M.

2006-01-01

The rainfed areas, commonly known as barani tract, accounts for about 25% of the total cropped area in the Punjab. The Pothwar plateau comprising 1.82 million hectare, is the largest contiguous block of rainfed areas in Punjab. Low and erratic rainfall, water-erosion hazard, inadequate depth of soil and poor soil-fertility are the main limitations affecting the production-potential of these areas. To ensure that farmers readily adopt the agricultural technologies developed by the research-system, these should be based on real-life problems, appropriate to the natural and socio-economic environments in which farmers make decisions. The present study was undertaken in tehsils Fatehjang and Gujar Khan of Pothwar plateau, to broadly understand farmers perceptions and approaches for rainwater-harvesting and soil-fertility management. It was observed that farm size was relatively bigger in Fatehjang than Gujar Khan. About 86% and 63% of respondents in Gujar Khan and Fatehjang cultivated their own lands. Nearly 40% of respondents in both the tehsils had their lands in 3 to 6 parcels, which hindered the farm-operation and soil and water conservation activities. The uses of fertilizers are sub-optimal and imbalanced. The soil-fertility is going down. The rainwater-conservation practices are not being adopted, due to high cost of machinery and disinterest of farmers in agriculture. The farming is going to be come un- economical. The analysis of strengths, weaknesses, opportunities and threats (SWOT) was carried out and the results are discussed. Some recommendations have been proposed to control soil-erosion, moisture-stress and fertility-degradation and to sustain agricultural production in these areas. (author)

OMI/Aura and MODIS/Aqua Merged Cloud Product 1-Orbit L2 Swath 13x24 km V003

Data.gov (United States)

National Aeronautics and Space Administration — The OMI/Aura and MODIS/Aqua Merged Cloud Product 1-Orbit L2 Swath 13x24 km (OMMYDCLD) is a Level-2 orbital product that combines cloud parameters retrieved by the...

EVALUATION OF PRIMARY PRODUCTIVITY AT THE WILDLIFE PROTECTED AREA, "NEVADO DE TOLUCA" MEXICO, DURING THE DRY SEASON

Directory of Open Access Journals (Sweden)

J. Martínez-Hernández

2014-08-01

Full Text Available This is the first report on grassland primary productivity for the wildlife protected area Nevado de Toluca (APFF Nevado de Toluca. We evaluated three communities in this area during dry season: Loma Alta, La Peñuela y Agua Blanca. Following Hodgson (1994, for this study we used exclusion cages. Vegetation was cut every 28 days during a five months sampling period. A randomized block design was used, where the blocks represented the grassland communities and the different months constituted treatments. The month of September showed the higher production (610.3 kg/ha DM. No significant differences were observed among communities (P >0.05. In conclusion, these communities have similar low primary productivity through the evaluation dry season months, which in addition was found lower in comparison to other areas, therefore livestock grazing in this region should be limited this season.

Distributed Identification of Top-l Inner Product Elements and its Application in a Peer-to-Peer Network

Data.gov (United States)

National Aeronautics and Space Administration — Inner product computation is an important primitive used in many techniques for feature dependency detection, distance computation, clustering and correlation...

Multi-Use Solar Thermal System for Oxygen Production from Lunar Regolith [7227-570], Phase II

Data.gov (United States)

National Aeronautics and Space Administration — We propose to develop an innovative solar thermal system for oxygen production from lunar regolith. In this system solar radiation is collected by the concentrator...

Analysis of causes of combustible mixture explosions inside production floor areas

Directory of Open Access Journals (Sweden)

Lyapin Anton

2016-01-01

Full Text Available The work provides a cause analysis for major industrial explosions and a review of the causes of combustive air-gas mixture generation in a production environment. It has been established that during operation of explosive production facilities, it is process equipment that, as a rule, creates explosive environment inside the floor area. A qualitative method for determination of a potential accident has been reviewed. Analysis of the nature of explosion effect on building structures and equipment has shown that exposions characterised by absence of equipment and building structure disintegration normally have a localized character. It has been identified that during explosions inside process equipment, the largest structural damage occurs in spots hit by equipment debris. Complete destruction of building structures and equipment is caused by explosions inside equipment containing large quantities of combustible products. It has been identified that most explosions are accompanied by partial or total destruction of building structures and equipment. Therefore, measures taken to protect equipment and buildings from explosion effects lack efficiency.

Current and future translation trends in aeronautics and astronautics

Science.gov (United States)

Rowe, Timothy

1986-01-01

The pattern of translation activity in aeronautics and astronautics is reviewed. It is argued that the international nature of the aerospace industry and the commercialization of space have increased the need for the translation of scientific literature in the aerospace field. Various factors which can affect the quality of translations are examined. The need to translate the activities of the Soviets, Germans, and French in materials science in microgravity, of the Japanese, Germans, and French in the development of industrial ceramics, and of the Chinese in launching and communications satellites is discussed. It is noted that due to increases in multilateral and bilateral relationships in the aerospace industry, the amount of translation from non-English source material into non-English text will increase and the most important languages will be French and German, with an increasing demand for Japanese, Chinese, Spanish, and Italian translations.

Should Broca's area include Brodmann area 47?

Science.gov (United States)

Ardila, Alfredo; Bernal, Byron; Rosselli, Monica

2017-02-01

Understanding brain organization of speech production has been a principal goal of neuroscience. Historically, brain speech production has been associated with so-called Broca’s area (Brodmann area –BA- 44 and 45), however, modern neuroimaging developments suggest speech production is associated with networks rather than with areas. The purpose of this paper was to analyze the connectivity of BA47 ( pars orbitalis) in relation to language . A meta-analysis was conducted to assess the language network in which BA47 is involved. The Brainmap database was used. Twenty papers corresponding to 29 experimental conditions with a total of 373 subjects were included. Our results suggest that BA47 participates in a “frontal language production system” (or extended Broca’s system). The BA47  connectivity found is also concordant with a minor role in language semantics. BA47 plays a central role in the language production system.

Geochemical Characteristics of Shallow Groundwater in Jiaoshiba Shale Gas Production Area: Implications for Environmental Concerns

Directory of Open Access Journals (Sweden)

Yiman Li

2016-11-01

Full Text Available The geochemical characteristics of shallow groundwater are essential for environmental impact studies in the shale gas production area. Jiaoshiba in the Sichuan basin is the first commercial-scale shale gas production area in China. This paper studied the geochemical and isotopic characteristics of the shallow groundwater of the area for future environmental concerns. Results show that the average pH of the shallow groundwater is 7.5 and the total dissolved solids (TDS vary from 150 mg/L to 350 mg/L. The main water types are HCO3-Ca and HCO3-Ca·Mg due to the carbonates dissolution equilibrium in karst aquifers. The concentrations of major ions and typical toxic elements including Mn, Cr, Cu, Zn, Ba, and Pb are below the drinking water standard of China and are safe for use as drinking water. The high nitrate content is inferred to be caused by agricultural pollution. The shallow groundwater is recharged by local precipitation and flows in the vertical circulation zone. Evidences from low TDS, water isotopes, and high 3H and 14C indicate that the circulation rate of shallow groundwater is rapid, and the lateral groundwater has strong renewability. Once groundwater pollution from deep shale gas production occurs, it will be recovered soon by enough precipitation.

Radon and its decay product activities in the magmatic area and the adjacent volcano-sedimentary Intrasudetic Basin

OpenAIRE

Solecki, A. T.; Puchala, R.; Tchorz, D.

2007-01-01

In the magmatic area of Sudetes covering the Karkonosze granite and adjacent volcano-sedimentary Intrasudetic Basin a study of atmospheric radon activity was performed by means of SSNTD Kodak LR-115. The study was completed by gamma spectrometric survey of eU and eTh determined by gamma activity of radon decay products 214Bi and 208Tl respectively. In the case of the western part of the Karkonosze granite area the radon decay products activity in the granitic basement was ...

77 FR 49478 - Public Notice for Waiver Of Aeronautical Land-Use Assurance; Sidney Municipal Airport, Sidney, OH

Science.gov (United States)

2012-08-16

... Aeronautical Land-Use Assurance; Sidney Municipal Airport, Sidney, OH AGENCY: Federal Aviation Administration... airport property nor a determination of eligibility for grant-in-aid funding from the FAA. The disposition... or at Sidney Municipal Airport, Sidney, Ohio. SUPPLEMENTARY INFORMATION: Following is a legal...

77 FR 2605 - Public Notice for Waiver of Aeronautical Land-Use Assurance; Gerald R. Ford International Airport...

Science.gov (United States)

2012-01-18

... DEPARTMENT OF TRANSPORTATION Federal Aviation Administration Public Notice for Waiver of Aeronautical Land-Use Assurance; Gerald R. Ford International Airport, Grand Rapids, MI AGENCY: Federal... this FAA action may be reviewed at this same location or at Gerald R. Ford International Airport, Grand...

14 CFR 193.17 - How must design and production approval holders handle information they receive from the FAA...

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false How must design and production approval... REGULATIONS PROTECTION OF VOLUNTARILY SUBMITTED INFORMATION § 193.17 How must design and production approval... under § 193.9(a)(2) to the holders of design approvals of production approvals issued by the FAA, the...

RSS SSM/I OCEAN PRODUCT GRIDS DAILY FROM DMSP F14 NETCDF V7

Data.gov (United States)

National Aeronautics and Space Administration — The RSS SSM/I Ocean Product Grids Daily from DMSP F14 netCDF dataset is part of the collection of Special Sensor Microwave/Imager (SSM/I) and Special Sensor...

RSS SSM/I OCEAN PRODUCT GRIDS DAILY FROM DMSP F11 NETCDF V7

Data.gov (United States)

National Aeronautics and Space Administration — The RSS SSM/I Ocean Product Grids Daily from DMSP F11 netCDF dataset is part of the collection of Special Sensor Microwave/Imager (SSM/I) and Special Sensor...

RSS SSM/I OCEAN PRODUCT GRIDS DAILY FROM DMSP F13 NETCDF V7

Data.gov (United States)

National Aeronautics and Space Administration — The RSS SSM/I Ocean Product Grids Daily from DMSP F13 netCDF dataset is part of the collection of Special Sensor Microwave/Imager (SSM/I) and Special Sensor...

Chemicalization in water treatment in peat production areas

International Nuclear Information System (INIS)

Madekivi, O.; Marja-Aho, J.; Selin, P.; Jokinen, S.

1995-01-01

Chemicalization of runoff waters of peat production has been studied since 1989, first in laboratory and since 1990 in practice. The methods have been developed as cooperation between Vapo Oy and Kemira Chemicals Oy. In chemicalization the dissolved substances are coagulated and they settle after that into sedimentation basins. Good purification results require rapid and effective mixing, so the formed particles are combined to larger particles, and they form settleable flock. The coagulation efficiency depends on the properties of the water to be purified, such as alkalinity and pH, the quality and the quantity of humic substances, and the quality and the quantity of the flocking chemicals. Chemicalization is at present the most effective, but also the most expensive method for purification of drying waters of peat production areas. The chemicalized water is on the basis of most quality factors cleaner than water running off a virgin bog. The most visible change is the clarification of the water which is due to the coagulation of the colouring humic substances and iron. The colorimetric value is decreased by over 70 %, the best results being over 90 %. The colorimetric value of the purified water (30-100 mg Pt/l) is below the values of the runoff water of a virgin bog (100-200 mg Pt/l). The chemicalization process and the results of the researches are presented in the article. (3 refs., 6 figs., 2 tabs.)

Rainfed Areas and Animal Agriculture in Asia: The Wanting Agenda for Transforming Productivity Growth and Rural Poverty

Science.gov (United States)

Devendra, C.

2012-01-01

The importance of rainfed areas and animal agriculture on productivity enhancement and food security for economic rural growth in Asia is discussed in the context of opportunities for increasing potential contribution from them. The extent of the rainfed area of about 223 million hectares and the biophysical attributes are described. They have been variously referred to inter alia as fragile, marginal, dry, waste, problem, threatened, range, less favoured, low potential lands, forests and woodlands, including lowlands and uplands. Of these, the terms less favoured areas (LFAs), and low or high potential are quite widely used. The LFAs are characterised by four key features: i) very variable biophysical elements, notably poor soil quality, rainfall, length of growing season and dry periods, ii) extreme poverty and very poor people who continuously face hunger and vulnerability, iii) presence of large populations of ruminant animals (buffaloes, cattle, goats and sheep), and iv) have had minimum development attention and an unfinished wanting agenda. The rainfed humid/sub-humid areas found mainly in South East Asia (99 million ha), and arid/semi-arid tropical systems found in South Asia (116 million ha) are priority agro-ecological zones (AEZs). In India for example, the ecosystem occupies 68% of the total cultivated area and supports 40% of the human and 65% of the livestock populations. The area also produces 4% of food requirements. The biophysical and typical household characteristics, agricultural diversification, patterns of mixed farming and cropping systems are also described. Concerning animals, their role and economic importance, relevance of ownership, nomadic movements, and more importantly their potential value as the entry point for the development of LFAs is discussed. Two examples of demonstrated success concern increasing buffalo production for milk and their expanded use in semi-arid AEZs in India, and the integration of cattle and goats with oil

Rainfed areas and animal agriculture in Asia: the wanting agenda for transforming productivity growth and rural poverty.

Science.gov (United States)

Devendra, C

2012-01-01

The importance of rainfed areas and animal agriculture on productivity enhancement and food security for economic rural growth in Asia is discussed in the context of opportunities for increasing potential contribution from them. The extent of the rainfed area of about 223 million hectares and the biophysical attributes are described. They have been variously referred to inter alia as fragile, marginal, dry, waste, problem, threatened, range, less favoured, low potential lands, forests and woodlands, including lowlands and uplands. Of these, the terms less favoured areas (LFAs), and low or high potential are quite widely used. The LFAs are characterised by four key features: i) very variable biophysical elements, notably poor soil quality, rainfall, length of growing season and dry periods, ii) extreme poverty and very poor people who continuously face hunger and vulnerability, iii) presence of large populations of ruminant animals (buffaloes, cattle, goats and sheep), and iv) have had minimum development attention and an unfinished wanting agenda. The rainfed humid/sub-humid areas found mainly in South East Asia (99 million ha), and arid/semi-arid tropical systems found in South Asia (116 million ha) are priority agro-ecological zones (AEZs). In India for example, the ecosystem occupies 68% of the total cultivated area and supports 40% of the human and 65% of the livestock populations. The area also produces 4% of food requirements. The biophysical and typical household characteristics, agricultural diversification, patterns of mixed farming and cropping systems are also described. Concerning animals, their role and economic importance, relevance of ownership, nomadic movements, and more importantly their potential value as the entry point for the development of LFAs is discussed. Two examples of demonstrated success concern increasing buffalo production for milk and their expanded use in semi-arid AEZs in India, and the integration of cattle and goats with oil

Introduction to NASA Symposium on Productivity and Quality

Science.gov (United States)

Braunstein, David

1984-01-01

The discussions will concentrate on white-collar organizational issues common to large organizations. The program will address a number of management issues for improving our nation's productivity and quality, and therefore its competitive position. executives have contributed their time to share /their experience with you. In addition, the American Institute of Astronautics & Aeronautics corporate members have helped to organize the sessions. I am most grateful for this support. The NASA Administrator has set the goal for NASA to become a leader in productivity and quality.

Productivity analysis of sesame (Sesamum indicum L.) production under organic and inorganic fertilizers applications in Doma Local Government Area, Nasarawa State, Nigeria

OpenAIRE

Umar, H. S.; Okoye, C. U.; Agwale, A. O

2011-01-01

The study assessed productivity levels of sesame farms under organic and inorganic fertilizers applications in Doma Local Government Area of Nasarawa State. Multi-stage random sampling was used in selecting 96 sesame farmers; made up of 48 organic and 48 inorganic fertilizers users. Data were collected through structured questionnaire and analyzed using Total Factor Productivity Analysis, OLS Regression Analysis and Gross Margin Analysis. Results show that sesame farmers who applied inorganic...

Secure real-time wireless video streaming in the aeronautical telecommunications network

Science.gov (United States)

Czernik, Pawel; Olszyna, Jakub

2010-09-01

As Air Traffic Control Systems move from a voice only environment to one in which clearances are issued via data link, there is a risk that an unauthorized entity may attempt to masquerade as either the pilot or controller. In order to protect against this and related attacks, air-ground communications must be secured. The challenge is to add security in an environment in which bandwidth is limited. The Aeronautical Telecommunications Network (ATN) is an enabling digital network communications technology that addresses capacity and efficiency issues associated with current aeronautical voice communication systems. Equally important, the ATN facilitates migration to free flight, where direct computer-to-computer communication will automate air traffic management, minimize controller and pilot workload, and improve overall aircraft routing efficiency. Protecting ATN communications is critical since safety-of-flight is seriously affected if an unauthorized entity, a hacker for example, is able to penetrate an otherwise reliable communications system and accidentally or maliciously introduce erroneous information that jeopardizes the overall safety and integrity of a given airspace. However, an ATN security implementation must address the challenges associated with aircraft mobility, limited bandwidth communication channels, and uninterrupted operation across organizational and geopolitical boundaries. This paper provides a brief overview of the ATN, the ATN security concept, and begins a basic introduction to the relevant security concepts of security threats, security services and security mechanisms. Security mechanisms are further examined by presenting the fundamental building blocks of symmetric encipherment, asymmetric encipherment, and hash functions. The second part of this paper presents the project of cryptographiclly secure wireless communication between Unmanned Aerial Vehicles (UAV) and the ground station in the ATM system, based on the ARM9 processor

76 FR 3695 - Public Notice for Waiver of Aeronautical Land-Use Assurance Viroqua Municipal Airport; Viroqua, WI

Science.gov (United States)

2011-01-20

... Aeronautical Land-Use Assurance Viroqua Municipal Airport; Viroqua, WI AGENCY: Federal Aviation Administration... the Viroqua Municipal Airport, Viroqua, WI. The Wisconsin Department of Transportation (WisDOT) is... of the subject airport property nor a determination of eligibility for grant-in-aid funding from the...

A Basal Area Increment-Based Approach of Site Productivity Evaluation for Multi-Aged and Mixed Forests

Directory of Open Access Journals (Sweden)

Liyong Fu

2017-04-01

Full Text Available Accurate estimates of forest site productivity are essential for environmental planning and forest management. In this study, we developed a new productivity index, hereafter termed basal area potential productivity index (BAPP, to estimate site productivity for irregular and complex forests characterized by multi-aged, multi-species, and multi-layer stands. We presented the biological relevance of BAPP with its computational details. We also compared BAPP against basal area realized productivity (BARP in order to verify the practicability and reliability of BAPP. Time-series data of the national forest inventory on 1912 permanent sample plots that were located in two main forest types and consisted of oak-dominated mixed forests and other broadleaf forests in northeast China were used to demonstrate the application of BAPP. The results showed that the value of BAPP for each sample plot was larger than or equal to the corresponding BARP value for each forest type. For appropriately managed stands with relatively better site conditions, the values of both BARP and BAPP were almost identical. The values of the difference between BAPP and BARP could therefore be used to effectively assess forest site productivity. Meanwhile, BAPP also provides much reliable and valuable information that can aid decision-making in forest management.

Alternative agriculture as a substitute for environmental remediation. Production of poultry in radiologically contaminated areas

International Nuclear Information System (INIS)

Peters, E.L.; Brisbin, I.L.; Kennamer, R.A. Jr.

1995-01-01

Exploiting the physiological and ecological characteristics of domesticated species has seldom been considered as a means of returning radiologically contaminated areas to safe agricultural production. However, the proper choice of cultivated and domesticated species, together with appropriate husbandry practices, may allow safe production of foods, fibre and energy. As an example, factors that could permit safe production of food products for human consumption from poultry raised in contaminated areas are considered. These factors include radionuclide transfer from the environment into poultry and methods for reducing radionuclide uptake and/or decontaminating chickens to yield acceptable food products. Studies of growth and feed intake rates of chickens under intensive management and free-ranging husbandries, 137 Cs uptake by chickens exposed to contaminated sediments, potential effects of husbandry on 137 Cs concentrations and 137 Cs elimination by chickens after removal of contaminated feed are described. Data from these and other studies are combined in simulation models of the 13 '7Cs kinetics of chickens. Chicken product 137 Cs concentrations ([ 137 Cs]s) decrease with increases in body mass, apparently as a result of decreasing mass specific intake rates. Husbandries that increase contaminant intake (e.g. free-ranging rearing conditions versus brooder house production) or access to contaminated soils (e.g. scattering feed directly onto contaminated solid versus the use of feeders) increase total body [ 137 Cs]s. However, model simulations indicate that it is possible to produce safe poultry products (especially eggs) at all but unrealistically high feed contamination levels. Even when dietary 137 Cs levels produce [ 137 Cs]s in poultry products that exceed acceptable limits, the high metabolism of poultry leads to a rapid decrease in [ 137 Cs]s once the chickens are placed on uncontaminated rations. This permits the use of contaminated feed or forage for

A Tool for Measuring NASA's Aeronautics Research Progress Toward Planned Strategic Community Outcomes

Science.gov (United States)

Tahmasebi, Farhad; Pearce, Robert

2016-01-01

Description of a tool for portfolio analysis of NASA's Aeronautics research progress toward planned community strategic Outcomes is presented. For efficiency and speed, the tool takes advantage of a function developed in Excels Visual Basic for Applications. The strategic planning process for determining the community Outcomes is also briefly discussed. Stakeholder buy-in, partnership performance, progress of supporting Technical Challenges, and enablement forecast are used as the criteria for evaluating progress toward Outcomes. A few illustrative examples of using the tool are also presented.

RSS SSM/I OCEAN PRODUCT GRIDS 3-DAY AVERAGE FROM DMSP F14 NETCDF V7

Data.gov (United States)

National Aeronautics and Space Administration — This dataset is part of the collection of Special Sensor Microwave/Imager (SSM/I) and Special Sensor Microwave Imager Sounder (SSMIS) data products produced as part...

NACP Site: Terrestrial Biosphere Model and Aggregated Flux Data in Standard Format

Data.gov (United States)

National Aeronautics and Space Administration — This data set provides standardized output variables for gross primary productivity (GPP), net ecosystem exchange (NEE), leaf area index (LAI), ecosystem respiration...

NACP Site: Terrestrial Biosphere Model and Aggregated Flux Data in Standard Format

Data.gov (United States)

National Aeronautics and Space Administration — ABSTRACT: This data set provides standardized output variables for gross primary productivity (GPP), net ecosystem exchange (NEE), leaf area index (LAI), ecosystem...

Fabrication of High Resolution Lightweight X-ray Mirrors Using Mono-crystalline Silicon Project

Data.gov (United States)

National Aeronautics and Space Administration — "Three factors characterize an X-ray optics fabrication technology: angular resolution, effective area per unit mass, and production cost per unit effective...

Environmental risk assessment in an oil production station near a mangrove area

Energy Technology Data Exchange (ETDEWEB)

Z' Graggen, M.; Moraes, R.; Ferreira, H.; Thomas, C. [Golder Associates, Rio de Janeiro, RJ (Brazil); Linhares, M.; Vaqueiro, R.L.C.; Sauerbronn, J.L.B. [PETROBRAS, Rio de Janeiro, RJ (Brazil)

2004-07-01

Pedra Branca Station is an oil production area that pumps, stores and transfers crude oil from wells located near the station. It is located 2 km of the mouth of the Sao Paulo River, northeast Brazil, in a mangrove area of social, economical and environmental importance. During the past 30+ years of operation, the area has been contaminated with leaks and spills of crude oil from pipelines and storage tanks. The assessment aimed to verify if local conditions represent risk to maintenance workers at the Station, nearby residents that collect firewood and shellfish and that consume shellfish from the Site. Crab and oyster samples were collected and analyzed and a questionnaire concerning activities of workers and residents was administrated. Contaminants of potential concern included barium, polycyclic aromatic hydrocarbons and petroleum hydrocarbons. Potential risks associated with soil/sediment ingestion, dermal contact with soil/sediment and ingestion of shellfish were evaluated. The study indicated that risks to maintenance worker and nearby residents due to exposure to non-carcinogenic and carcinogenic substances present in soil, sediment, and shellfish were below limits considered acceptable to regulatory authorities. The evaluation provided scientific bases for decision making regarding the management of the contaminated area. (author)

Research and Development Progress of National Key Laboratory of Advanced Composites on Advanced Aeronautical Resin Matrix Composites

Directory of Open Access Journals (Sweden)

LI Bintai

2016-06-01

Full Text Available Applications and research progress in advanced aeronautical resin matrix composites by National Key Laboratory of Advanced Composites (LAC were summarized. A novel interlaminar toughening technology employing ultra-thin TP non-woven fabric was developed in LAC, which significantly improved the compression after impact (CAI performances of composite laminates.Newly designed multilayer sandwich stealth composite structures exhibited a good broadband radar absorbing properties at 1-18 GHz.There were remarkable developments in high toughness and high temperature resin matrix composites, covering major composite processing technologies such as prepreg-autoclave procedure, liquid composite molding and automation manufacture, etc. Finally, numerical simulation and optimization methods were deliberately utilized in the study of composites curing behavior, resin flow and curing deformation. A composite material database was also established.In conclusion, LAC has been a great support for the development of aeronautical equipment, playing such roles as innovation leading, system dominating, foundation supporting and application ensuring of aerocomposites.

Calibration of the indicators of the product KERMa-AREA in radiodiagnostic equipment

International Nuclear Information System (INIS)

Ginjaume, M.; Jarvinen, H.; Turak, O.

2013-01-01

Currently the IAEA proposes two procedures for the calibration of the determination of the PKA systems integrated in the x-ray equipment. The traditional method is to measure air kerma at a certain distance from the focus through an ionization chamber reference and then the area of the field of radiation in that position. The alternative method is based on measuring directly the product kerma-area using equipment calibrated in this magnitude. In both cases the calibration procedure takes into account the position of the tube on the stretcher of the patient. The objective of this study was to compare the practical application of both calibration procedures as well as assess the accuracy of indication of the PKA in the consoles of the radiology equipment. (Author)

Presentation of the results of 1993-1994 of the peat production research area; Turvetuotanto - tutkimusalueen katsaus

Energy Technology Data Exchange (ETDEWEB)

Leinonen, A.

1996-12-31

The development target of the peat production research area of the Biomass research programme is to improve the competitivity of peat by reducing the production costs by 20 % (5-6 FIM/MWh) from the level of 1992 and to reduce the environmental load. The main targets of peat production, by which the target can be met, are ditching and preparation technologies, drying technology, machine technology, methodology, integration of wood harvesting and peat production, and application of the results of the Optimiturve research programme in practice. The objectives of the peat production research are possible to meet if the partial targets are met. Increment of the open-ditch distance from 20 m to 60 m reduces the production costs by 5.0 %, increment of the rate of utilization of solar radiation from 30 % to 40 % reduces the production costs by 8 %, reduction of the amount of residual peat from 3000 MWh to 1500 MWh reduces the costs by 6.5 %, development of light and firesafe machines by 3 %, and integrated harvesting of wood by 3 %. Meeting of the partial targets reduces the production costs by 24 %. The main research areas of peat production will be carried out further. The total funding of the peat production researches in 1993-1994 was 19.4 million FIM (9.7 million FIM/a). The share of the total funding of the research organization projects has been 6.7 million FIM and that of the company projects 12.7 million FIM. The share of the Finnish Ministry of Trade and Industry of the funding has been 9.0 million FIM (46 %)

RSS SSM/I OCEAN PRODUCT GRIDS MONTHLY AVERAGE FROM DMSP F15 NETCDF V7

Data.gov (United States)

National Aeronautics and Space Administration — The RSS SSM/I Ocean Product Grids Monthly Average from DMSP F15 netCDF dataset is part of the collection of Special Sensor Microwave/Imager (SSM/I) and Special...

Study on rural duck production systems in selected areas of Bangladesh

DEFF Research Database (Denmark)

Khanum, J.; Chwalibog, André; Huque, K.S.

2005-01-01

The present study was carried out to investigate scavenging duck production systems in two regions (Netrokona Sadar Upazila and Sundargonj Upazila) of Bangladesh. Feeding systems and availability of feed for raising ducks, production performance of scaavenging ducks and profitability of raising...... ducks were evaluated. Information was collected from the farmers through a questionnaire. All the farmers of Sundargonj Upazila used mixed feed compund, but in Netrokona only 14% of farmers fed mixed feed to their ducks. The rest was either paddy or wheat alone or a mixture of both. Deshi (local) ducks...... were mostly used in Netrokona but in Sundargonj, farmers mostly raise exotic ducks. The farmers of Sundargonj area increased the amount of feed with the increase of age of their ducks, but the farmers of Netrokona decreased the amount of feed. The mortality rate in Netrokona was 27.1% but in Sundargonj...

SUSTAINABLE TILAPIA PRODUCTION IN A BACKYARD SYSTEM FOR RURAL AREAS USING FISH BY-PRODUCTS IN FORMULATED DIETS

Directory of Open Access Journals (Sweden)

Servando Rueda Lopez

2013-12-01

Full Text Available The aim of the present study was to demonstrate the feasibility of producing Tilapia (Oreochromis niloticuss, L. with formulated diets containing acid fish silage made with Hancock (Pterigoplichthys multiradiatus by-products in substitution of fishmeal. Thus four treatments containing increasing levels (0, 5, 10 and 15% of acid fish silage to substitute fishmeal were used to feed tilapia juveniles in triplicate groups (average 1.5±0.7 g and 4.3±1.0 cm.  Fish silage was prepared by adding citric and phosphoric acids at 2.6% each resulting in a liquefaction of the chop by-product mixture. After two weeks, the diets were prepared to contain 32-35% protein content. After 50 days of experimental period a total growth increase up to 827% was observed without significant differences among treatments. A specific growth rate from 3.70 to 4.10 and a survival rate from 96 to 99% was observed.  The cost analysis shows a saving on production cost up to 23.87% using the highest incorporation level of fish silage. The use of Aquaculture Recirculation System made with components normally found in a hardware store in rural or semi urban areas is discussed. It is concluded that fish offal shows a promising activity that favors the increase in fish protein production to resolve the demand of cheap protein.

Automotive and aeronautical clusters in the São Paulo state’s Vale do Paraíba: a comparison of formation trajectories

Directory of Open Access Journals (Sweden)

Márcio da Silveira Luz

2010-04-01

Full Text Available This paper presents a comparison of the relevant characteristics of São Paulo State’s Vale do Paraíba automotive and aerospace clusters observed and analyzes the technological and productive chains strengthening. In order to accomplish it, the adopted methodological procedures are of qualitative nature, by means of documentary research. The results pointed out that the government established, in the mid-1945, the currently named Departamento de Ciência e Tecnologia Aeroespacial (DCTA, as a research and development (R&D center and, by 1979, Embraer, a state-owned aeronautical construction industry. It was also sought to generate conditions so that domestic companies could emerge around and replace the dependency on aerospace systems and subsystems international suppliers by developing indigenous technological capacities. The automotive cluster under study started in the São Paulo State’s Vale do Paraíba (PPV by means of the regionalization of multinational automotive construction firms migrated from ABC Paulista region looking for physical space for their growth, also relying on tax benefits. The survey results indicate that, in spite of fundamental differences with regard to their productive chains strenghtening processes, they showed similar adverse results.

77 FR 17564 - Public Notice for Waiver of Aeronautical Land-Use Assurance; Jackson Municipal Airport, Jackson, MN

Science.gov (United States)

2012-03-26

... Aeronautical Land-Use Assurance; Jackson Municipal Airport, Jackson, MN AGENCY: Federal Aviation Administration... the Jackson Municipal Airport, Jackson MN. The City is proposing a land swap to exchange this 18 acre...-aid funding from the FAA. The disposition of proceeds from the disposal of the airport property will...

Modern aluminium alloys for aeronautical applications. The role of the Al-Li system

International Nuclear Information System (INIS)

Godefroid, L.; Bernardes, A.T.; Bastian, F.L.

1995-01-01

A great effort has been made for some Aluminum Industries since the ''80 to develop new alloys with weight reduction, to use in aeronautic industry. The system Al-Li is a good example of this effort, because it presents a low density and a greater stiffness than usual alloys. In this paper we compare some Al-Li alloys with respect to mechanical properties: fracture toughness and resistance to crack propagation on fatigue case. The results are discussed, as well as the nowadays status and perspectives for the use of these alloys. (author)

New concepts regarding the production of waterfowl and other game birds in areas of diversified agriculture

Science.gov (United States)

Nelson, H.K.; Duebbert, H.F.

1974-01-01

Many concepts regarding breeding ecology of waterfowl and the influences of environmental factors on annual production have changed in the past 20 years. These influences are especially pronounced in the prairie region of central North America where agriculture becomes more intensive each year. The principal task assigned to this Research Center when established in 1965 was to determine the relative impact of these influences on production and to identify those facets of breeding biology, nesting habitat requirements and other factors that may be altered to increase production on lands dedicated for this purpose. A corollary objective was to develop methods for enhancing production of waterfowl and other ground-nesting birds on private lands in agricultural areas. Some of the highlights of our findings to date, together with the results from current work of others, provide new information on waterfowl that indicates: (1) homing instincts are not as specific as indicated by earlier workers, (2) there are differences in pioneering between species, sexes and age classes, (3) strength and duration of pair bonds vary by species and age classes, (4) territorial tolerances for most species are greater than previously indicated, (5) there is differential productivity by age classes in some species, (6) there has been a gradual decline in nesting success in the prairie region the past 30 years, (7) adverse influences of intensive agriculture are increasing, (8) mammalian predation is an important factor, (9) high quality, secure nesting habitat and a complex of wetland types are the essential components of an optimum production unit, (10) the size and shape of blocks of nesting cover are important management considerations, (11) overharvest of local breeding populations is becoming a serious problem in some areas. Each of these subjects is discussed as related to research objectives and current management problems. Recommendations are presented for obtaining maximum

A patient dose survey for femoral arteriogram diagnostic radiographic examinations using a dose-area product meter

International Nuclear Information System (INIS)

Thwaites, J.H.; Rafferty, M.W.; Gray, N.; Black, J.; Stock, B.

1996-01-01

A patient dose survey was carried out for femoral arteriogram procedures at the Sir Charles Gairdner Hospital. The procedure involves fluoroscopy to the pelvic region to locate a guide wire and catheter, followed by a series of radiographs extending from the pelvic area to the feet to form a collage image of the entire arterial system. Radiographs are taken whilst a bolus of contrast media is injected into the arterial system. A dose-area product meter was used to determine the dose-area product delivered to patients. Radiographic and patient details were logged with dose-area product for each part of each procedure. Mean energy imparted, mean effective dose and effective dose equivalent are calculated for the examinations. Calculated effective doses are shown to produce results consistent with those of other authors. We present a method for dealing with a complex radiographic procedure including multiple radiographs and fluoroscopy in an attempt to provide a simple way of calculating effective dose from which a general risk factor can be determined. The effective dose varies considerably from examination to examination due to the large range in the number of radiographs taken in any one procedure. A useful index can be obtained by logging the number of radiographs in each region, and fluoroscopy time, from which the effective dose may be easily calculated. These measurements extend a continuing survey of doses for common diagnostic radiographic examinations which previously included the simple examinations: lumbar spine, abdoment and pelvis. (author)

Prevalence and risk factor's analysis of bovine brucellosis in peri-urban areas under intensive system of production in Gujarat, India

OpenAIRE

M. D. Patel; P. R. Patel; M. G. Prajapati; A. N. Kanani; K. K. Tyagi; A. B. Fulsoundar

2014-01-01

Aim: A study on surveillance of bovine brucellosis in dairy herds of peri-urban areas under intensive system of production was carried out by milk-ELISA. Various risk factors were identified having significant association with occurrence of bovine brucellosis in dairy herds of peri-urban areas. Materials and Methods: Five randomly selected peri-uban areas of six cities of Gujarat were included in the present study. Five randomly selected dairy herds under intensive system of production fro...

Agronomic performance for biodiesel production potential of Brassica carinata A. Braun in Mediterranean marginal areas

Directory of Open Access Journals (Sweden)

Francesco Montemurro

2016-03-01

Full Text Available Brassicaceae are promising oil feedstock for cultivation in centralsouthern Italy. Therefore, a two-year investigation on Brassica carinata A. Braun (cv. CT 204 was carried out in three sites of Apulia region [Site 1, Alberobello - Murgia foreland; Site 2, Troia (Foggia - Daunian sub-Apennines; Site 3, Monteroni (Lecce - Area of Salento], and in one site of Basilicata region (Site 4, Hill of Matera. The aim was to identify site-specific management practices [by comparing minimum vs conventional tillage, low sowing density vs high sowing density; different levels of nitrogen (N supply and organic fertilisers] in the four different marginal areas, to achieve optimum yield performance for biodiesel prospective production. The crop showed a good adaptability in the study sites, and the highest N level positively influenced the yield performance in Sites 1, 2 and 3. Moreover, the reduction of mechanical operations (minimum tillage did not negatively influence crop production and seed oil content. The highest density of sowing tested determined the best crop performance in Site 3, particularly showing the maximum seed oil content with the lowest N supply. Finally, in Site 4 the compost mixed with mineral N fertiliser as well as the sewage sludge from urban wastewater determined productive results comparable to those obtained with mineral fertiliser, evidencing that organic fertilisers could (partially or completely substitute the mineral one for this crop in the study site. On the whole, seed yield and oil content showed a potential for biodiesel production of Brassica carinata cultivated with site-specific agronomic techniques in four different marginal areas of Southern Italy, suggesting it can be likely achieved the crop environmental adaptation.

Analysis and 3D inspection system of drill holes in aeronautical surfaces

Science.gov (United States)

Rubio, R.; Granero, L.; Sanz, M.; García, J.; Micó, V.

2017-06-01

In aerospace industry, the structure of the aircraft is assembled using small parts or a combination of them that are made with different materials, such as for instance aluminium, titanium, composites or even 3D printed parts. The union between these small parts is a critical point for the integrity of the aircraft. The quality of this union will decide the fatigue of adjacent components and therefore the useful life of them. For the union process the most extended method is the rivets, mainly because their low cost and easy manufacturing. For this purpose it is necessary to made drill holes in the aeronautical surface to insert the rivets. In this contribution, we present the preliminary results of a 3D inspection system [1] for drill holes analysis in aeronautical surfaces. The system, based in optical triangulation, was developed by the Group of Optoelectronic Image Processing from the University of Valencia in the framework of the Airbus Defence and Space (AD&S), MINERVA project (Manufacturing industrial - means emerging from validated automation). The capabilities of the system permits to generate a point cloud with 3D information and GD&T (geometrical dimensions and tolerances) characteristics of the drill hole. For the inner surface defects detection, the system can generate an inner image of the drill hole with a scaled axis to obtain the defect position. In addition, we present the analysis performed for the drills in the wing station of the A-400 M. In this analysis the system was tested for diameters in the range of [10 - 15.96] mm, and for Carbon Fibre.

Effects of Climate and Social Change on Pasture Productivity and Area in the Alay Valley, Kyrgyzstan

Science.gov (United States)

Zhang, L.; Smithwick, E. A. H.

2017-12-01

The high elevation Alay Valley, located in the central Asian country of Kyrgyzstan, has experienced substantial socio-political and environmental changes in recent decades, resulting from the collapse of the Soviet Union and an increase in average annual temperature from 1.8 C to 2.7 C between 1990 and 2014. However, the consequences of these changes on pastureland productivity and area has not been previously assessed, despite the critical cultural and economic importance of pasturelands for sustaining livelihoods in this region. We assessed spatial and temporal patterns of soil moisture, pasture productivity and pasture area in the Alay Valley. Supervised classification was performed on Landsat imagery over the study region to distinguish pastures and agricultural land in order to relate changes in soil moisture to specific land classes. Root Zone Soil Moisture (RZSM) was estimated between May 2015 and June 2017 from Soil Moisture Active Passive L4 RZSM product. Average monthly NDVI for 2016 was calculated to obtain seasonal patterns in productivity of the pasturelands in the region. Results show that annual RZSM trends closely matched those of precipitation, as RZSM peaks during May (the wettest month) and decreases during the dry summer. The NDVI trend is also notable as it peaks very early in June before declining due to limited precipitation and grazing practices. There has been a sharp increase in pasturelands encompassing the bank of the Kyzyl Suu river from 1993 to 2016. Likely due to turmoil from collapse of the USSR, the area of pasturelands decreased slightly from 59.98 to 55.99 km^2 from 1993-1994, corresponding with a decline in livestock count and GDP per capita. The area of pasturelands has since recovered and is hovering around 104.47 - 107.95 km^2 between 2009-2016. Overall results highlight both sensitivity and resilience of high elevation pasture to coupled socio-environmental drivers.

RSS SSM/I OCEAN PRODUCT GRIDS WEEKLY AVERAGE FROM DMSP F15 NETCDF V7

Data.gov (United States)

National Aeronautics and Space Administration — The RSS SSM/I Ocean Product Grids Weekly Average from DMSP F15 netCDF dataset is part of the collection of Special Sensor Microwave/Imager (SSM/I) and Special Sensor...

RSS SSMIS OCEAN PRODUCT GRIDS 3-DAY AVERAGE FROM DMSP F16 NETCDF V7

Data.gov (United States)

National Aeronautics and Space Administration — The RSS SSMIS Ocean Product Grids 3-Day Average from DMSP F16 netCDF dataset is part of the collection of Special Sensor Microwave/Imager (SSM/I) and Special Sensor...

RSS SSM/I OCEAN PRODUCT GRIDS WEEKLY AVERAGE FROM DMSP F10 NETCDF V7

Data.gov (United States)

National Aeronautics and Space Administration — The RSS SSM/I Ocean Product Grids Weekly Average from DMSP F10 netCDF dataset is part of the collection of Special Sensor Microwave/Imager (SSM/I) and Special Sensor...

RSS SSM/I OCEAN PRODUCT GRIDS WEEKLY AVERAGE FROM DMSP F8 NETCDF V7

Data.gov (United States)

National Aeronautics and Space Administration — The RSS SSM/I Ocean Products Grid Weekly Average from DMSP F8 netCDF dataset is part of the collection of Special Sensor Microwave/Imager (SSM/I) and Special Sensor...

77 FR 67862 - Public Notice for Waiver of Aeronautical Land-Use Assurance; J. Douglas Bake Memorial Airport...

Science.gov (United States)

2012-11-14

... Aeronautical Land-Use Assurance; J. Douglas Bake Memorial Airport (OCQ) Oconto, WI AGENCY: Federal Aviation... No. 18) at the J. Douglas Bake Memorial Airport, Oconto, WI. Parcel No. 18 is located outside of the... property to be released at the J. Douglas Bake Memorial Airport in Oconto, Wisconsin: Part of Government...

Supply Selection and Supply Chain Maturity - important areas of the quality production assurance

Directory of Open Access Journals (Sweden)

Ivan Koblen

2014-12-01

Full Text Available The paper pays attention to selected information focused on the key requirements and criteria used in both the conventional supplier selection and sustainable supplier selection processes. The authors introduce the supply chain maturity levels, which, together with the supplier selection and assessment issue, is the essential area for the assurance of the high quality, safety and dependability of the products.

Using Very High Resolution Remotely Sensed Imagery to Estimate Agricultural Production: A comparison of food insecure and secure growing areas in Kenya

Science.gov (United States)

Grace, K.; Husak, G. J.; Bogle, S.

2013-12-01

Determining the amount of food produced in a food insecure, isolated, subsistence farming community can be used to help identify households or communities who may be in need of additional food resources. Measuring annual food production in developing countries, much less at a sub-national level, is complicated by lack of data. It can be difficult and costly to access all of the farming households engaged in subsistence farming. However, recent research has focused on the use of remotely sensed data to aid in the estimation of area under cultivation and because food production is the measure of yield (production per hectare) multiplied by area (number of hectares), we can use the area measure to reduce uncertainty in food production estimates. One strategy for estimating cultivated area relies on a fairly time intensive manual interpretation of very high resolution data. Due to the availability of very high resolution data it is possible to construct estimates of cultivated area, even in communities where fields are small. While this strategy has been used to effectively estimate cultivated area in a timely manner, questions remain about the spatial and temporal generalizability of this approach. The purpose of this paper is to produce and compare estimates of cultivated area in two very different agricultural areas of Kenya, a highly food insecure country in East Africa, during two different agricultural seasons. The areas selected represent two different livelihood zones: a marginal growing area where poor farmers rely on inconsistent rainfall and a lush growing area near the mountainous region of the middle-West area of the country where rainfall is consistent and therefore more suited to cultivation. The overarching goal is to determine the effectiveness of very high resolution remotely sensed imagery in calculating estimates of cultivated area in areas where food production strategies are different. Additionally the results of this research will explore the

Chart Supplements - Aeronautical Information Services Digital Products

Data.gov (United States)

Department of Transportation — The Chart Supplements are searchable by individual airport in PDF format. They contain data on public and joint use airports, seaplane bases, heliports, VFR airport...

Effects of climate change on agroclimatic indices in rainfed wheat production areas of Iran

Directory of Open Access Journals (Sweden)

mehdi nassiri mahalati

2009-06-01

Full Text Available Despite the importance of all climatic parameters for crop growth and productivity, temperature and rainfall are more crucial compared to others and almost all climatic and agroclimatic indices are based on these two variables. Climate change will lead to variation in agroclimatic indices and evaluation of this variation is a key to study crop response to future climatic conditions. Length of growing period (LGP and rainfall deficit index could be used as indictors for assessment of potential impact of climate change of rainfed systems. To study this impact long-term weather data of main rainfed wheat production areas of Iran were collected. UKMO general circulation model was used for perdiction of climatic parameters of selected stations for years 2025 and 2050 based on pre defined scenarios of IPCC for this target years. LGP, length of dry season and rainfall deficit index were calculated from present data and the generated data for target years. The results showed that LGP based on temperature would be increased in all rainfed areas of country. However, including the water availability in the calculation was led to a lowered LGP. Reduction of LGP for the studied stations was in the range of 8-36 and 19-55 days for years 2025 and 2050, respectively. Rainfall deficit index for 2025 and 2050 was varied, respectively at 8.3-17.7 and 21.1-32.3 mm. It was estimated that under climatic condition of years 2025 and 2050 the cultivated areas in the main rainfed production regions of the country would be reduced by 16-25 and 23-33%, respectively.

Willow wood production on radionuclide polluted areas

Directory of Open Access Journals (Sweden)

Rodkin Oleg I.

2010-01-01

Full Text Available ABSTRACT: One of the key environmental problems in Belarus is effective use of agricultural lands contaminated by radionuclide due to the Chernobyl disaster. The alternative method to traditional agricultural crops is fast growing willow cultivation. It is possible to use biomass of willow as renewable energy source. The goal of our investigation was the estimation of environmental aspects of willow wood production on polluted areas. The field study experiments (2007-2010 were conducted at Krichev district of Mogilev region in eastern Belarus. This region characterized by high level of Cs-137 contamination as well as high level of heavy metals pollution. In the first stage of experiments, the concentration of cesium-137 in different parts of willow biomass had been measured and transfer factor calculated. The measuring had been done for leaves, roots, and wood. To control cesium-137 accumulation in willow biomass we apply different types (nitrogen N, phosphorus P and potassium K and dose of fertilizer. The experiments show that potassium mineral fertilizer is the key factor for radionuclide accumulation control. The optimal dose of potassium is 90 kg per hectare. On the base of experimental results the model of cesium-137 accumulation in the wood for a 21 year has been developed. In accordance with calculation to the end of willow cultivation (21 year concentration of cesium-137 in wood will not be higher than permitted even with the level of cesium-137 contamination in the soil 1480 kBq/m2 (maximum 140 kqB/m2 with permitted level for firewood is 740 Bq/kg.. The concentration of cesium-137 in the roots increases gradually and get maximum in 21 year (3000 kqB/m2. Our results confirm that in the sum about 0.8 million hectares of radionuclide polluted arable lands partly excluded from agricultural practice in Belarus could be used for willow biomass production.

OMI/Aura and MODIS/Aqua Merged Cloud Product 1-Orbit L2 Swath 13x24 km V003 (OMMYDCLD) at GES DISC

Data.gov (United States)

National Aeronautics and Space Administration — The OMI/Aura and MODIS/Aqua Merged Cloud Product 1-Orbit L2 Swath 13x24 km (OMMYDCLD) is a Level-2 orbital product that combines cloud parameters retrieved by the...

NASA/IPAC Infrared Science Archive

Data.gov (United States)

National Aeronautics and Space Administration — IRSA is chartered to curate the calibrated science products from NASAs infrared and sub-millimeter missions, including five major large-area/all-sky surveys. IRSA...

Status of compost usage and its performance on vegetable production in Monga areas of Bangladesh

OpenAIRE

G.K.M.M. Rahman

2014-01-01

The present study was carried out to assess the existing status of compost usage on vegetable production and determine the overall effect of household waste compost (HWC) on growth and yield of vegetables and enhancement of soil fertility in the monga areas of Bangladesh. A field survey was conducted on 152 sampled farmers during 2010 to 2011. Questionnaire containing both closed and open-ended questions were used to assess existing production practices of vegetables using compost in both hom...

Influence of land area and capital strengthening fund of rural economic enterprises toward corn production in North Sumatera province

Science.gov (United States)

Rahmanta

2018-02-01

Corn is one of the staple food crops. Corn can also be processed into various foods and also as animal feed. The need for corn will continue to increase from year to year so it is necessary to increase production. The government has targeted corn crop self-sufficiency to achieve the corn production standards required by the animal feed industry. The purpose of this study is to analyze the effect of land area and capital strengthening funds to rural economic enterprises on corn production. This study uses secondary data obtained from the Central Statistical Agency of North Sumatra Province. The research method used is panel regression method. The result shows that the area of land has a significant effect on corn production and the capital strengthening fund to the rural economy institution has an insignificant effect on corn production in North Sumatera Province.

OZONE PRODUCTION IN THE PHILADELPHIA URBAN AREA DURING NE-OPS 99

International Nuclear Information System (INIS)

KLEINMAN, L.I.; DAUM, P.H.; BRECHTEL, F.; LEE, Y.N.; NUNNERMACKER, L.J.; SPRINGSTON, S.R.; WEINSTEIN-LLOYD, J.

2001-01-01

As part of the 1999 NARSTO Northeast Oxidant and Particulate Study (NE-OPS) field campaign, the DOE G-1 aircraft sampled trace gases and aerosols in and around the Philadelphia metropolitan area. Twenty research flights were conducted between July 25 and August 11. The overall goals of these flights were to obtain a mechanistic understanding of O(sub 3) production; to characterize the spatial and temporal behavior of photo-oxidants and aerosols; and to study the evolution of aerosol size distributions, including the process of new particle formation. Within the NE-OPS program, other groups provided additional trace gas, aerosol, and meteorological observations using aircraft, balloon, remote sensing, and surface based instruments (Phillbrick et al., 2000). In this article we provide an overview of the G-1 observations related to O(sub 3) production, focusing on the vertical distribution of pollutants. Ozone production rates are calculated using a box model that is constrained by observed trace gas concentrations. Highest O(sub 3) concentrations were observed on July 31, which we present as a case study. On that day, O(sub 3) concentrations above the 1-hour 120 ppb standard were observed downwind of Philadelphia and also in the plume of a single industrial facility located on the Delaware River south of the city

78 FR 1848 - Plutonium-238 Production for Radioisotope Power Systems for National Aeronautics and Space...

Science.gov (United States)

2013-01-09

...: Notice of Intent to Prepare a Supplement Analysis; Notice of Cancellation of an Environmental Impact Statement. SUMMARY: The Department of Energy (DOE) issued the Programmatic Environmental Impact Statement for Accomplishing Expanded Civilian Nuclear Energy Research and Development and Isotope Production...

Numerical Study of the Thermal Behaviour of a Thermo-Structural Aeronautical Composite under Fire Stress

OpenAIRE

Grange , N; Chetehouna , K; Gascoin , Nicolas; Senave , S

2015-01-01

International audience; The use of composite materials for aeronautical applications has been growing since several years because of the opportunity to produce lightweight structures reducing the fuel bills and emissions. The need for fireproof certification imposes costly and time consuming experiments that might be replaced or complemented in the years to come by numerical calculations. The present work creates a CFD numerical model of a fireproof test. As an example, a composite part (plen...

The impact on the landscape, environment and society of new productive chains in a mountain area: strategies, analysis and future perspectives

Directory of Open Access Journals (Sweden)

Simona Rainis

2012-06-01

Full Text Available Zootechnical farms enhance the preservation and valorization of the environmental value of the surroundings in marginal areas, such as the mountains of Friuli Venezia Giulia. An important tool for relaunching mountain animal husbandry can be the promotion of an appropriate policy to maintain and develop local food chains, supporting typical products, tightly related to the peculiarity of the agro-ecosystem. The aim of the chain Carne della Montagna Friulana-Carne di Qualità is to create a cooperation among primary producers, transformation companies, sellers and research institutes, in order to develop innovative pathways throughout the production of meat in Carnia (UD. The project was designed in 2007/08 but it was operative from 2010, with a first batch of animals. The stakeholders subscribed a chain agreement, adopting production guidelines and a commercial trademark. Since the meat is not yet ready, the present paper is, in part, an analysis of the preliminary modification of the operative context and, in part, a previsional examination of the possible effect of the activation of this production chain on the area. The results investigated economic, social, landscape, technical and technological (related to food safety elements. It can be observed, by an introductive evaluation, that this productive circuit may valorize the resources of this mountain area and can enhance zootechnics in mountain areas. The guidelines allow a vertical integration throughout the production path, coordinating all the operators. This type of production can be considered a niche product, related to the territory, with the maximum guarantee for the consumers. The environmental worthiness is the recovering and the improving of these marginal, agricultural areas. Actually, an overall evaluation can be done only from the summer of 2011, when data such as the organoleptic and qualitative characteristics, selling prices, level of appreciation by the customers and

Proposed Development of NASA Glenn Research Center's Aeronautical Network Research Simulator

Science.gov (United States)

Nguyen, Thanh C.; Kerczewski, Robert J.; Wargo, Chris A.; Kocin, Michael J.; Garcia, Manuel L.

2004-01-01

Accurate knowledge and understanding of data link traffic loads that will have an impact on the underlying communications infrastructure within the National Airspace System (NAS) is of paramount importance for planning, development and fielding of future airborne and ground-based communications systems. Attempting to better understand this impact, NASA Glenn Research Center (GRC), through its contractor Computer Networks & Software, Inc. (CNS, Inc.), has developed an emulation and test facility known as the Virtual Aircraft and Controller (VAC) to study data link interactions and the capacity of the NAS to support Controller Pilot Data Link Communications (CPDLC) traffic. The drawback of the current VAC test bed is that it does not allow the test personnel and researchers to present a real world RF environment to a complex airborne or ground system. Fortunately, the United States Air Force and Navy Avionics Test Commands, through its contractor ViaSat, Inc., have developed the Joint Communications Simulator (JCS) to provide communications band test and simulation capability for the RF spectrum through 18 GHz including Communications, Navigation, and Identification and Surveillance functions. In this paper, we are proposing the development of a new and robust test bed that will leverage on the existing NASA GRC's VAC and the Air Force and Navy Commands JCS systems capabilities and functionalities. The proposed NASA Glenn Research Center's Aeronautical Networks Research Simulator (ANRS) will combine current Air Traffic Control applications and physical RF stimulation into an integrated system capable of emulating data transmission behaviors including propagation delay, physical protocol delay, transmission failure and channel interference. The ANRS will provide a simulation/stimulation tool and test bed environment that allow the researcher to predict the performance of various aeronautical network protocol standards and their associated waveforms under varying

Nitrogen and sulfur emissions from the burning of forest products near large urban areas

Science.gov (United States)

Dean A. Hegg; Lawrence F. Radke; Peter V. Hobbs; Charles A. Brock; Phillip J. Riggan

1987-01-01

Airborne measuremens of trace gases and particles in the smoke from a prescribed burn of forest products in the Los Angeles basin show significantly higher emissions of NOx, SO2, and particulate NO3 than do measurements in smokes from the burning of biomass in rural areas. It is postulated that the...

Measurement and properties of the dose-area product ratio in external small-beam radiotherapy.

Science.gov (United States)

Niemelä, Jarkko; Partanen, Mari; Ojala, Jarkko; Sipilä, Petri; Björkqvist, Mikko; Kapanen, Mika; Keyriläinen, Jani

2017-06-21

In small-beam radiation therapy (RT) the measurement of the beam quality parameter, i.e. the tissue-phantom ratio or TPR 20,10 , using a conventional point detector is a challenge. To obtain reliable results, one has to consider potential sources of error, including volume averaging and adjustment of the point detector into the narrow beam. To overcome these challenges, a different type of beam quality parameter in small beams was studied, namely the dose-area product ratio, or DAPR 20,10 . With this method, the measurement of a dose-area product (DAP) using a large-area plane-parallel chamber (LAC) eliminates the uncertainties in detector positioning and volume averaging that are present when using a point detector. In this study, the properties of the DAPR 20,10 of a cone-collimated 6 MV photon beam were investigated using Monte Carlo (MC) calculations and the obtained values were compared to measurements obtained using two LAC detectors, PTW Type 34073 and PTW Type 34070. In addition, the possibility of determining the DAP using EBT3 film and a Razor diode detector was studied. The determination of the DAPR 20,10 value was found to be feasible in external small-beam radiotherapy using cone-collimated beams with diameters from 4-40 mm, based on the results of the two LACs, the MC calculations and the Razor diode. The measurements indicated a constant DAPR 20,10 value for fields 20-40 mm in diameter, with a maximum relative change of 0.6%, but an increase of 7.0% for fields from 20-4 mm in diameter for the PTW Type 34070 chamber. Simulations and measurements showed an increase of DAPR 20,10 with increasing LAC size or dose integral area for the studied 4-40 mm cone-collimated 6 MV photon beams. This has the consequence that there should be a reference to the size of the used LAC active area or the DAP integration area with the reported DAPR 20,10 value.

Measurement and properties of the dose-area product ratio in external small-beam radiotherapy

Science.gov (United States)

Niemelä, Jarkko; Partanen, Mari; Ojala, Jarkko; Sipilä, Petri; Björkqvist, Mikko; Kapanen, Mika; Keyriläinen, Jani

2017-06-01

In small-beam radiation therapy (RT) the measurement of the beam quality parameter, i.e. the tissue-phantom ratio or TPR20,10, using a conventional point detector is a challenge. To obtain reliable results, one has to consider potential sources of error, including volume averaging and adjustment of the point detector into the narrow beam. To overcome these challenges, a different type of beam quality parameter in small beams was studied, namely the dose-area product ratio, or DAPR20,10. With this method, the measurement of a dose-area product (DAP) using a large-area plane-parallel chamber (LAC) eliminates the uncertainties in detector positioning and volume averaging that are present when using a point detector. In this study, the properties of the DAPR20,10 of a cone-collimated 6 MV photon beam were investigated using Monte Carlo (MC) calculations and the obtained values were compared to measurements obtained using two LAC detectors, PTW Type 34073 and PTW Type 34070. In addition, the possibility of determining the DAP using EBT3 film and a Razor diode detector was studied. The determination of the DAPR20,10 value was found to be feasible in external small-beam radiotherapy using cone-collimated beams with diameters from 4-40 mm, based on the results of the two LACs, the MC calculations and the Razor diode. The measurements indicated a constant DAPR20,10 value for fields 20-40 mm in diameter, with a maximum relative change of 0.6%, but an increase of 7.0% for fields from 20-4 mm in diameter for the PTW Type 34070 chamber. Simulations and measurements showed an increase of DAPR20,10 with increasing LAC size or dose integral area for the studied 4-40 mm cone-collimated 6 MV photon beams. This has the consequence that there should be a reference to the size of the used LAC active area or the DAP integration area with the reported DAPR20,10 value.

RSS SSM/I OCEAN PRODUCT GRIDS 3-DAY AVERAGE FROM DMSP F14 NETCDF V7

Data.gov (United States)

National Aeronautics and Space Administration — The RSS SSM/I Ocean Product Grids 3-Day Average from DMSP F14 netCDF dataset is part of the collection of Special Sensor Microwave/Imager (SSM/I) and Special Sensor...

RSS SSM/I OCEAN PRODUCT GRIDS 3-DAY AVERAGE FROM DMSP F10 NETCDF V7

Data.gov (United States)

National Aeronautics and Space Administration — The RSS SSM/I Ocean Product Grids 3-Day Average from DMSP F10 netCDF dataset is part of the collection of Special Sensor Microwave/Imager (SSM/I) and Special Sensor...

14 CFR 1263.105 - Considerations in determining whether production or disclosure should be made.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 5 2010-01-01 2010-01-01 false Considerations in determining whether... § 1263.105 Considerations in determining whether production or disclosure should be made. The General...) Whether disclosure might improperly reveal trade secrets, or commercial or financial information that is...

9 CFR 314.7 - Carcasses of livestock condemned on ante-mortem inspection not to pass through edible product areas.

Science.gov (United States)

2010-01-01

... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Carcasses of livestock condemned on... DISPOSAL OF CONDEMNED OR OTHER INEDIBLE PRODUCTS AT OFFICIAL ESTABLISHMENTS § 314.7 Carcasses of livestock condemned on ante-mortem inspection not to pass through edible product areas. Carcasses of livestock which...

76 FR 74844 - Public Notice for Waiver of Aeronautical Land-Use Assurance at Auburn-Lewiston Municipal Airport...

Science.gov (United States)

2011-12-01

... proposed legal description of the parcel to be designated as non-aeronautical use: A certain lot or parcel of land located on the westerly side of Hotel Road, in the City of Auburn, County of Androscoggin... found on the westerly right-of-way line of Hotel Road at the northeasterly corner of land N/F of Robert...

Modeling the dynamics of radionuclide concentration in animal derived products after an accident in tropical areas

International Nuclear Information System (INIS)

Vinhas, Denise M.; Rochedo, Elaine R.R.; Wasserman, Maria A.V.; Conti, Luiz F.C.

2005-01-01

Following an accidental release of radionuclides to the atmosphere with the contamination of large areas, a detailed and fast methodology to assess the prognosis of public exposure is needed to estimate radiological consequences and optimize decisions to the protection of the public. The German model ECOSYS has been chosen to integrate the SIEM - Integrated Emergency System, developed by IRD/CNEN to assess the doses to the public after an accidental contamination of rural areas. The use the model demands a considerable effort in adapting scenarios to fit the specific conditions of a location, considering the differences related to climate, environmental characteristics, agricultural calendar and practices, along with population diet. The area selected to start this adaptation considers the characteristics of the 50 km radius area surrounding the nuclear power plants at Angra dos Reis, Rio de Janeiro. At a first stage, the concentration on vegetal food products has been studied. This work describes the methodology used to select scenarios and presents results of the dynamics of the predicted concentration of radionuclides in different kinds of animal derived food products. The work provides guidance to the need of radioecological research needed to improve the adequacy of the estimates to actual Brazilian scenarios. (author)

Safety Risk Knowledge Elicitation in Support of Aeronautical R and D Portfolio Management: A Case Study

Science.gov (United States)

Shih, Ann T.; Ancel, Ersin; Jones, Sharon Monica; Reveley, Mary S.; Luxhoj, James T.

2012-01-01

Aviation is a problem domain characterized by a high level of system complexity and uncertainty. Safety risk analysis in such a domain is especially challenging given the multitude of operations and diverse stakeholders. The Federal Aviation Administration (FAA) projects that by 2025 air traffic will increase by more than 50 percent with 1.1 billion passengers a year and more than 85,000 flights every 24 hours contributing to further delays and congestion in the sky (Circelli, 2011). This increased system complexity necessitates the application of structured safety risk analysis methods to understand and eliminate where possible, reduce, and/or mitigate risk factors. The use of expert judgments for probabilistic safety analysis in such a complex domain is necessary especially when evaluating the projected impact of future technologies, capabilities, and procedures for which current operational data may be scarce. Management of an R&D product portfolio in such a dynamic domain needs a systematic process to elicit these expert judgments, process modeling results, perform sensitivity analyses, and efficiently communicate the modeling results to decision makers. In this paper a case study focusing on the application of an R&D portfolio of aeronautical products intended to mitigate aircraft Loss of Control (LOC) accidents is presented. In particular, the knowledge elicitation process with three subject matter experts who contributed to the safety risk model is emphasized. The application and refinement of a verbal-numerical scale for conditional probability elicitation in a Bayesian Belief Network (BBN) is discussed. The preliminary findings from this initial step of a three-part elicitation are important to project management practitioners as they illustrate the vital contribution of systematic knowledge elicitation in complex domains.

76 FR 59160 - Notice Pursuant to the National Cooperative Research and Production Act of 1993-Robotics...

Science.gov (United States)

2011-09-23

... Production Act of 1993--Robotics Technology Consortium, Inc. Notice is hereby given that, on July 27, 2011... seq. (``the Act''), the Robotics Technology Consortium (``RTC'') has filed written notifications... Machining, Longmont, CA; Carnegie Robotics LLC, Pittsburgh, PA; Embry-Riddle Aeronautical University...

Investigation of OxProduction Rates in the Mexico City Metropolitan Area during MILAGRO

Science.gov (United States)

Dusanter, S.; Molina, L. T.; Stevens, P. S.

2009-12-01

Understanding the oxidative capacity of the atmosphere and the formation of secondary pollutants are important issues in atmospheric chemistry. For instance, the photochemical production of tropospheric ozone (O3) is of particular interest due to its detrimental effects on both human health and agricultural ecosystems. A detailed characterization of tropospheric O3 production rates will help in the development of effective control strategies. The 2006 Mexico City Metropolitan Area field campaign (MCMA-2006) was one of four components of MILAGRO (Megacity Initiative: Local And Global Research Observations) intended to collect information on the impact of megacity emissions on local, regional and global scales. In this presentation, rates of production of Ox (Ox = O3 + NO2) species during MCMA-2006 at the supersite T0 (Instituto Mexicano del Petroleo) will be presented using different approaches based on measured and modeled concentrations of ROx (OH + HO2 + RO2) radicals. In addition, we will examine both the reactivity of OH and the contribution of specific peroxy radicals to the oxidation rate of NO to estimate the contribution of groups of VOCs (alkanes, alkenes, aromatics, oxygenated and biogenic VOCs) to the total production rate of Ox species.

Performance evaluation of domestic prototype dose area product meter SFT-1

International Nuclear Information System (INIS)

Lee, Ho Sun; Han, Seong Gyu; Roh, Young Roh; Lim, Hyun Jong; Kim, Jung Min; Kim, Jong Uk; Chae, Hyun Sik; Yoon, Yong Su

2016-01-01

The importance of radiation dose display of medical X-ray equipment was emphasized, while third edition of IEC(International Electrotechnical Commission) 60601 started to apply. The existing medical X-ray equipment selected a method for attaching the DAP(Dose Area Product) meter when the dose display. However, because the DAP meter was dependent on all of the income, And it did not yet produced in Korea. So, we received the support of Seoul R and BD Program(Grants No. C1152055) to produce DAP meter prototype of the Domestically technology. In this study, the performance of this prototype was evaluated by comparing the German company's product. Evaluation item was an electronic capture performance, radiation dose dependence, radiation quality dependence, energy transmittance, repeatability, light transmittance of 6 entries. And IEC 60580 was based on this evaluation. Evaluation results were electronic capture performance intrinsic error 9.5%, radiation dose dependence limits of variation 1%, repeatabilit y coefficient of variation 2%, energy transmittance 91% each assessment was passed. However radiation quality dependence limits of variation 29%, light transmittance 55% was less than acceptance criteria

Hanford Immobilized LAW Product Acceptance: Tanks Focus Area Testing Data Package II

International Nuclear Information System (INIS)

Schulz, Rebecca L.; Lorier, Troy H.; Peeler, David K.; Brown, Kevin G.; Reamer, Irene A.; Vienna, John D.; Jiricka, Antonin; Jorgensen, Benaiah M.; Smith, Donald E.

2001-01-01

This report is a continuation of the Hanford Immobilized Low Activity Waste (LAW) Product Acceptance (HLP): Initial Tanks Focus Area Testing Data Package (Vienna (and others) 2000). In addition to new 5000-h product consistency test (PCT), vapor hydration test (VHT), and alteration products data, some previously reported data together with relevant background information are included for an easily accessible source of reference when comparing the response of the various glasses to different test conditions. A matrix of 55 glasses was developed and tested to identify the impact of glass composition on long-term corrosion behavior and to develop an acceptable composition region for Hanford LAW glasses. Of the 55 glasses, 45 were designed to systematically vary the glass composition, and 10 were selected because large and growing databases on their corrosion characteristics had accumulated. The targeted and measured compositions of these glasses are found in the Appendix A. All glasses were fabricated according to standard procedures and heat treated to simulate the slow cooling that will occur in a portion of the waste glass after vitrification in the planned treatment facility at Hanford

A new generation of starch products as excipient in pharmaceutical tablets .1. Preparation and binding properties of high surface area potato starch products

NARCIS (Netherlands)

Wierik, GHPT; ArendsScholte, AW; Eissens, AC; Lerk, CF

1996-01-01

A new pharmaceutical excipient with a high binding capacity was prepared from potato starch by enzymatic degradation, followed by suitable dehydration of the precipitated and filtered retrograded starch to produce high specific surface area products. Thermal dehydration methods like drying at room

Strategies for resource management to improve agricultural productivity in Bariarpur Tal area of Bihar (India)

International Nuclear Information System (INIS)

Khan, A.R.; Upadhyaya, A.; Bhatnagar, P.R.; Gautam, U.S.; Singh, S.K.; Singh, S.R.

2002-06-01

Water logged Tal area is termed as the stretch of land having bowl shaped depressions inundated in monsoon season due to spill/overflow from rivers or runoff from upstream end. A team of Agricultural Scientists studied and suggested a suitable plan to the Ministry of Agriculture, Government of India for improving the agricultural productivity of 40,000 hectares land lying between Ghoraghat and Bariarpur and Prasando to Khand Bihari in Munger district of Bihar, which lies in eastern India. These lands remain inundated with water from July till January. Tal lands in Bariarpur suffer due to stagnation of water during monsoon period and delay in drainage thereafter. This is a late winter mono-cropped area with very low productivity. Though the fertility status of soil is good, the quantity and quality of produce is poor. The canal network is also not efficient and other parts face drought. It is expected that the Ministry of Agriculture, Government of India will take up the action plan as per the recommendations of expert scientists' team to mitigate the sufferings and misery of the farmers and rural population of the area. The team of scientists had investigated in detail the genesis of the problem and suggested the appropriate management strategies to improve the agricultural production in this area upon the instruction of the Hon'ble Union Agricultural Minister Mr. Nitish Kumar. A reputed Journalist and dedicated Social Worker Mr. Dinesh brought the unbelievable misery of the rural population to the attention of the Agricultural Minister. The sufferings of the farmers of Bariarpur tal area thus cannot be mitigated without the implementation of recommendations suggested in the scientific report. It seems that a financial crunch is coming in the way for such implementation. Ministry of Agriculture, Ministry of Water Resources, State Government, NGOs and Social Organizations should come forward to help the rural population otherwise the ray of hope for a better living

Creation and clinical application of real-time dose monitor using dose area product meter

International Nuclear Information System (INIS)

Matsubara, Kosuke; Uoyama, Yoshinori; Iida, Hiroji; Mizushima, Takashi

2004-01-01

The management of patient dose has become more of an issue in recent years. Dose can be determined non-invasively and in real time through the use of a dose area product meter, but it is the area dose value that is obtained. Therefore, we created a program that estimates entrance skin dose (ESD) in real time from area dose values obtained during procedures. We used Microsoft Visual C++ 6.0 (Standard Edition) for the programming language and C language for the programming environment. The value was a maximum 285.4 mGy at ileus tube insertion when measuring ESD for radiography of the digestive organ and non-vascular type interventional radiology (IVR) using the created program and seeking the average according to the procedures. The program that we created can be considered valid for monitoring ESD correctly and in real time. (author)

Initial sustainability assessment of tapioca starch production system in Lake Toba area

Science.gov (United States)

Situmorang, Asido; Manik, Yosef

2018-04-01

This study aims to explore to what extent the principles of sustainability have been applied in a tapioca industry located in Lake Toba area and to explore the aspects that open the opportunities for system improvement. In conducting such assessment, we adopted the life-cycle approach using Mass Flow Analysis methods that covers all cassava starch production processes from fresh cassava root till dry cassava starch. The inventory data were collected from the company, in the form of both production record and interviews. From data analysis the authors were able to present a linked flow that describes the production process of tapioca starch that quantifies into the functional unit of one pack marketable tapioca starch weighs 50 kg. In order to produce 50 kg of tapioca, 200 kg cassava root and 800 kg of water are required. This production efficiency translates to 25% yield. This system generates 40 kg of cassava peel, 60 kg of pulp and 850 kg of waste water. For starch drying 208.8 MJ of thermal energy is required in the form of heating fuel. The material flow analysis is employed for impact assessment. Several options in improving the operation are proposed includes utilization of pulp into more valuable co-products, integration of waste treatment plant to enable the use of water recycled from the extraction operation for the washing process, and to application of a waste water treatment system that produces biogas as a renewable energy, which reduces the consumption of fuel in dryer unit.

Development of distinction method of production area of ginsengs by using a neutron activation analysis

Energy Technology Data Exchange (ETDEWEB)

Kim, Youngjin; Chung, Yongsam; Sim, Chulmuu; Sun, Gwangmin; Lee, Yuna; Yoo, Sangho

2011-01-15

During the last 2 years of the project, we have tried to develop the technology to make a distinction of the production areas for Korean ginsengs cultivated in the various provinces in Korea and foreign countries. It will contribute to secure the health food safety for public and stability of its market. In this year, we collected ginseng samples cultivated in the northeastern province in Chinese mainland such as Liaoning province, Jilin province and Baekdu mountain within Jilin province. 10 ginseng samples were collected at each province. The elemental concentrations in the ginseng were analyzed by using a neutron activation analysis technique at the HANARO research reactor. The distinction of production area was made by using a statistical software. As a result, the Chinese Korean ginsengs were certainly differentiated from those cultivated in the famous province in Korea though there was a limitation that the number of our sample we analyzed is very small.

Development of distinction method of production area of ginsengs by using a neutron activation analysis

International Nuclear Information System (INIS)

Kim, Youngjin; Chung, Yongsam; Sim, Chulmuu; Sun, Gwangmin; Lee, Yuna; Yoo, Sangho

2011-01-01

During the last 2 years of the project, we have tried to develop the technology to make a distinction of the production areas for Korean ginsengs cultivated in the various provinces in Korea and foreign countries. It will contribute to secure the health food safety for public and stability of its market. In this year, we collected ginseng samples cultivated in the northeastern province in Chinese mainland such as Liaoning province, Jilin province and Baekdu mountain within Jilin province. 10 ginseng samples were collected at each province. The elemental concentrations in the ginseng were analyzed by using a neutron activation analysis technique at the HANARO research reactor. The distinction of production area was made by using a statistical software. As a result, the Chinese Korean ginsengs were certainly differentiated from those cultivated in the famous province in Korea though there was a limitation that the number of our sample we analyzed is very small

Mixed crop-livestock production systems of smallholder farmers in sub-humid and semi-arid areas of Zambia

International Nuclear Information System (INIS)

Lungu, J.C.N.

2002-01-01

Livestock production activities among small-scale farmers of semi-arid (Agro-ecological zone 1) and sub-humid (Agro-ecological zone 2) areas of Zambia are integrated with crop production activities in what is termed as crop/livestock farming system. This is a closed system in which production of one enterprise depends on the other. In Zambia, crop production depends on draught animals for tillage of cropping area, animal manure for fertilisation of crops while livestock depend on crop residues for dry season feeding. Good quality grass is generally available in adequate amounts to support reasonable level of livestock productivity during the rainy season. But livestock rely on low quantity and poor quality, highly fibrous perennial grass from veld and fibrous crop residues during the dry season. These resources are inadequate to support optimum livestock productivity activities. Poor nutrition results in low rates of reproduction and production as well as increased susceptibility to diseases. With the increasing human population cropping land is expanding, leading to increased production of crop residues. This has however, reduced the grazing land available for ruminant production. In Zambia large quantities of crop residues (stovers, husks and straws, legume tops and hulls, sugar cane tops, cassava leaves, potato vines, etc.) are left in the field where they are wasted each year because small-scale farmers lack the knowledge on how best to use them. There is a need to find ways to reverse this situation by adapting known and workable technologies to local conditions and by introducing new approaches for improving the use of crop residues and poor quality fibrous feeds. Efforts should also be made to enlarge feed resource base. The technologies should be simple and effective. In the presence of a dynamic market system, livestock production in a crop/livestock system could be intensified and made profitable for small-scale farmers. (author)

Practices of farmers in production and marketing of tomato in Nsukka Local Government Area of Enugu State, Nigeria

Directory of Open Access Journals (Sweden)

Juliana Iwuchukwu

2017-12-01

Full Text Available The study described socio-economic characteristics, production, consumption and marketing patterns of tomato farmers as well as constraints they encounter in tomato production in Nsukka Local Government Area of Enugu State, Nigeria. One hundred and twenty tomato farmers randomly selected form twelve villages in the area constituted sample for the study. Data were collected with interview schedule and questionnaire and were presented with frequency, percentage and mean scores. Findings show that the respondents were mainly married (71% women (72.5% who were literate with mean age and mean farming experience of 42.22 years and 17.21years respectively. Greater proportion of the respondents grew tomatoes on communal land (31.7% with personal savings (42.5% and hired labour (45%. They grew tomatoes during rainy season (54.1% using personal reserved seeds (53.3%. Lack/poor storage facility (M=2.00 and fluctuation in price of tomato (M = 2.13 were some of the serious constraints to production and marketing of tomatoes respectively in the area. The study recommends that government, non-governmental organisations, self help development organisations/agencies as well as philanthropists should assist in provision of storage facilities for tomatoes so as to reduce losses and ensure preservation and availability of the product all year round at reasonable and stable price.

Baseline vegetation inventory and productivity assessment for the Syncrude Aurora Mine EIA local study area

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-12-31

This report presented an inventory and assessment of vegetation communities and forest covers within the proposed Aurora Mine local study area. A field inventory was conducted in the summer of 1995 to ground-truth air photo interpretations and to collect data. The inventory includes a classification of vegetation, forest covers and wetlands. It also includes the documentation of uncommon plants and the vegetation productivity estimates of tree, shrub and herbaceous plants. The study area is located east of the Athabasca River about 35 km northeast of Mildred Lake Oil Sands Plant. The area includes portions of Oil Sands Leases 10, 12, 13, 31, and 34 which includes much of the Muskeg River drainage and all of Kearl Lake. 24 refs., 7 tabs., 3 figs.

OMI/Aura Aerosol product Multi-wavelength Algorithm Zoomed 1-Orbit L2 Swath 13x12km V003

Data.gov (United States)

National Aeronautics and Space Administration — The reprocessed OMI/Aura Level-2 Zoomed Aerosol data product OMAEROZ at 13x12 km resolution has been made available from the NASA Goddard Earth Sciences Data and...

78 FR 32001 - Public Notice for a Change in Use of Aeronautical Property and Long-Term Lease Approval at...

Science.gov (United States)

2013-05-28

... International Airport approved Airport Layout Plan (ALP). There is to be no sale or transfer of property rights... DEPARTMENT OF TRANSPORTATION Federal Aviation Administration Public Notice for a Change in Use of Aeronautical Property and Long-Term Lease Approval at Harrisburg International Airport (MDT), Middletown, PA...

Irradiation of Oil / Water Biphasic Systems: the Importance of Interfacial Surface Area on the Production of Hydrogen and Other Deleterious Products

International Nuclear Information System (INIS)

Causey, Patrick-W.; Stuart, Craig-R.

2012-09-01

-water interfacial surface area, control of headspace gas composition, and removal of sample aliquots. Results highlight the importance of interfacial surface area in affecting the radiolytic degradation of the studied hydrocarbons. In particular, experiments having higher oil-water interfacial surface areas generate greater quantities of oil degradation products as compared with lower surface area samples. As expected, one notable result from these irradiations was the formation of significant quantities of hydrogen, which was found to be dependent on the interfacial surface area. Presented here is a review of the radiolytic degradation of insoluble organic material in aqueous systems, a summary of experimental results focusing on biphasic systems and a description of a strategy to mitigate the effects of insoluble organic material ingress and to aid in developing station-appropriate responses. (authors)

MODIS/Aqua Aerosol 5-Min L2 Swath 3km - NRT

Data.gov (United States)

National Aeronautics and Space Administration — The new Collection 6.1 (C61) MYD04_3K product is an improved version based on algorithm changes in Dark Target (DT) Aerosol retrieval over urban areas and...

LITTER PRODUCTION AND NUTRIENT ADDITION IN ATLANTIC FOREST AREAS IN SANTA MARIA DE JETIBÁ, ES

Directory of Open Access Journals (Sweden)

Geângelo Petene Calvi

2009-09-01

Full Text Available This study was accomplished on Espíndula Farm, Santa Maria de Jetibá (ES, with the objective of evaluating the litter and nutrients deposition in areas with different succession stadiums. Two areas were selected with different vegetable coverings, defined as: (SF Secondary Forest, with about 25 ha of area, corresponding to an old area of cassava cultivation with about 50 years in process of ecological succession and where today there is a secondary forest and an Old Secondary Forest (OSF corresponding to a forest area that has just been submitted to a selective wood extraction for use of the farm itself. In each one of vegetal areas, approximately 0.1 ha was delimited and in these ten conical collectors were randomized distributed. The litter collections were accomplished monthly from November 2003 to October 2005. After drying, the material was stratified and the total contributed and the contribution of the different fractions, and the nutritious addition were evaluated. It was not verified significant differences among the total of litter deposited among the areas, being the highest production values observed in the summer, 5.70 Mg ha-1 (SF and 5.73 Mg ha-1(OSF, possibly due to the winds and rain mechanical action. The fraction of higher contribution was the foliar, corresponding to 74.62% for the SF area and 69.46% for the OSF area

Wastewater Reuse: An Economic Perspective to Identify Suitable Areas for Poplar Vegetation Filter Systems for Energy Production

Directory of Open Access Journals (Sweden)

Mauro Viccaro

2017-11-01

Full Text Available The increasing interest towards climate change, water and energy saving, and soil protection has led the research community to consider non-conventional water as a sustainable source for irrigation of energy crops. Vegetation filter systems are considered a reliable technique for sustainable biomass cultivation, enabling the use of reclaimed wastewater as water and nutrients sources during irrigation periods. In this study, a geographic information system (GIS-based spatial model was developed to identify areas potentially suitable for creating vegetation filter systems with poplars to size the plants of energy production. An economic assessment allowed us to identify the cost-effectiveness areas for biomass production that can be fertigated by reclaimed wastewater. Considering the Basilicata region as the test region, a surface area of 258,512 ha was investigated, identifying 73,331 ha of SRF soils sited downstream of 45 wastewater treatment plants (WWTPs. However, considering only areas that have positive net present value and are economically attractive, results indicate 1606 ha of SRF falling within the areas of influence of 39 WWTPs. The results show that the sector of dedicated crops, adjacent and linked with WWTPs, expresses a total capacity of 50.56 MW for thermal, 8.25 MW for electricity, and 31 MW for cogeneration (25.07 MWt and 5.94 MWe plants.

78 FR 76702 - Notice of Intent To Rule on Change in Use of Aeronautical Property at Warren Field Airport...

Science.gov (United States)

2013-12-18

... Use of Aeronautical Property at Warren Field Airport, Washington, NC AGENCY: Federal Aviation... requesting public comment on request by the City of Washington to change a portion of airport property from... H. Ford Aviation Investment Reform Act for the 21st Century (AIR 21). DATES: Comments must be...

14 CFR 61.411 - What aeronautical experience must I have to apply for a flight instructor certificate with a...

Science.gov (United States)

2010-01-01

... airship that is a light-sport aircraft. (e) Lighter-than-air category and balloon class privileges, (1) 35... apply for a flight instructor certificate with a sport pilot rating? 61.411 Section 61.411 Aeronautics... CERTIFICATION: PILOTS, FLIGHT INSTRUCTORS, AND GROUND INSTRUCTORS Flight Instructors With a Sport Pilot Rating...

Decision aiding handbooks for managing contaminated food production systems, drinking water and inhabited areas in Europe

DEFF Research Database (Denmark)

Nisbet, A.F.; Brown, J.; Howard, B.J.

2010-01-01

Three handbooks have been developed, in conjunction with a wide range of stakeholders to assist in the management of contaminated food production systems, inhabited areas and drinking water following a radiological incident. The handbooks are aimed at national and local authorities, central...... government departments and agencies, emergency services, radiation protection experts, the agriculture and food production sectors, industry and others who may be affected. The handbooks include management options for application in the different phases of an incident. Sources of contamination considered...

First direct landscape-scale measurement of tropical rain forest Leaf Area Index, a key driver of global primary productivity

Science.gov (United States)

David B. Clark; Paulo C. Olivas; Steven F. Oberbauer; Deborah A. Clark; Michael G. Ryan

2008-01-01

Leaf Area Index (leaf area per unit ground area, LAI) is a key driver of forest productivity but has never previously been measured directly at the landscape scale in tropical rain forest (TRF). We used a modular tower and stratified random sampling to harvest all foliage from forest floor to canopy top in 55 vertical transects (4.6 m2) across 500 ha of old growth in...

LBA Regional Land Cover from AVHRR, 8-km, 1984 (DeFries et al.)

Data.gov (United States)

National Aeronautics and Space Administration — This data set is a subset of an 8-km global land cover product (DeFries et al. 1998). This subset was created for the study area of the Large Scale...

LBA Regional Land Cover from AVHRR, 1-Degree, 1987 (Defries and Townshend)

Data.gov (United States)

National Aeronautics and Space Administration — ABSTRACT: This data set consists of a subset of a 1-degree global land cover product (DeFries and Townshend 1994). The subset was created for the study area of the...

78 FR 45181 - Foreign-Trade Zone 230-Piedmont Triad Area, North Carolina, Authorization of Production Activity...

Science.gov (United States)

2013-07-26

... DEPARTMENT OF COMMERCE Foreign-Trade Zones Board [B-31-2013] Foreign-Trade Zone 230--Piedmont Triad Area, North Carolina, Authorization of Production Activity, Oracle Flexible Packaging, Inc., (Foil-Backed Paperboard), Winston-Salem, North Carolina On March 25, 2013, the Piedmont Triad Partnership...

A new generation of starch products as excipient in pharmaceutical tablets .2. High surface area retrograded pregelatinized potato starch products in sustained-release tablets

NARCIS (Netherlands)

TeWierik, GHP; Eissens, AC; ArendsScholte, AW; Lerk, CF

1997-01-01

A new linear short-chain starch product was prepared by gelatinization of potato starch followed by enzymatic degradation, precipitation (retrogradation) and filtration. A high specific surface area was subsequently created by washing with ethanol or acetone or freeze-drying. Tablets compressed from

AGROECOSYSTEMS SUSTAINABILITY OF CASSAVA PRODUCTION OF PARAÍBA RURAL AREA FROM THE PERSPECTIVE OF BIOGRAM

Directory of Open Access Journals (Sweden)

Valdenildo Pedro da Silva

2015-08-01

Full Text Available Agriculture modernization resulting from green revolution occurred through means of diverse technological innovations as soluble fertilizers, pesticides, agricultural machinery and genetically modified seeds, aimed at increasing food production. However, the indiscriminate use of these innovations by farmers has been highlighted numerous environmental problems, affecting the productive agricultural system. This technological innovations reality and environmental obstacles, is also been experienced by cassava production in Paraíba rural area. Therefore, this study tried to assess the agroecosystems sustainability of cassava production (Manihot esculenta Crantz of Paraíba Rural Mesoregion, using Sustainable Development Index (S³ method, and its graphical representation, the Biogram. The results showed sustainability differences between the agroecosystems of investigated municipalities, of which Araçagi showed stable levels of sustainability, Araruna and Bananeiras demonstrated unstable levels, and Puxinanã showed the most critical sustainably level. It was concluded that, even the agroecosystems of Araçagi municipality showing better levels of sustainability, when compared with other municipalities assessed, cassava production showed unsustainability situations regarding its technological innovation levels, average yield of cassava production, land in erosion process, water scarcity and lack of social participation.

Product kerma in the air-area and radiation dose in dental radiodiagnosis

International Nuclear Information System (INIS)

Costa, Alessandro Martins da

2014-01-01

The main purpose of patient dosimetry in diagnostic radiology is to determine dosimetric quantities for the establishment and use of reference levels and comparative risk assessment. In recent publications the use of the air kerma-area product, PKA, has been suggested in dental radiology, as this quantity is more closely related to risk. The aim of this study was to perform a preliminary survey of PKA and effective dose in different types of dental examinations. The future perspective is a large-scale survey for the establishment and use of diagnostic reference levels in dentistry in Brazil. (author)

Health risk assessment of heavy metals in vegetables grown around battery production area

Directory of Open Access Journals (Sweden)

Ying Chen

2014-04-01

Full Text Available Battery production is one of the main sources of heavy metals that present great harm to human health even in low concentrations. Chromium (Cr, Cadmium (Cd and Lead (Pb were measured in edible portions of vegetables and soils around a battery production area in China, and the potential health risk of heavy metal contamination to the local population via vegetable consumption was evaluated. Their concentrations in edible portions of vegetables were 2.354 (0.078-14.878, 0.035 (0.003-0.230 and 0.039 (0.003-0.178 mg kg-1, respectively. Approximately 3 % of the Cd in the vegetable samples exceeded the maximum concentration allowable by national food safety criteria, although Pb content in all samples were within the criteria. Transfer factors (TF from soils to vegetables were dependent on vegetable species. Leguminous vegetables were more likely to accumulate Cr, while leaf vegetables tended to show higher levels of concentration of Cd and Pb. Melon vegetables demonstrated a relatively low capacity for accumulating the heavy metals studied. TF were positively correlated with soil organic matter and negatively correlated with soil pH. The mean estimated daily intake of Cr, Cd and Pb via dietary consumption of vegetables was 0.011, 1.65 × 10-4 and 1.84 × 10-4 mg kg-1 of body weight per day, respectively, levels that were much lower than the reference doses recommended by USEPA (U.S. Environmental Protection Agency and JECFA (Joint FAO/WHO Expert Committee on Food Additives, indicating that the potential health risk of Cr, Cd and Pb exposure via vegetable consumption to the local population around this battery production area could be negligible.

Larval and small juvenile cod Gadus morhua concentrated in the highly productive areas of a shelf break front

DEFF Research Database (Denmark)

Munk, Peter; Larsson, P.O.; Danielsen, D.

1995-01-01

describe the identified nursery areas of larvae/juveniles and analyse the connection between the distribution of cod and hydrographical (frontal) characteristics of the areas. A total area of 67000 km(2) was covered by stations in a 10 x 10 nautical mile grid. Salinity, temperature, NO3+NO2 and chlorophyll...... part of the investigation area, and within the zone of the front we observed enhanced primary production and abundance of both phyto- and zooplankton. The distribution of larval and juvenile cod was also related to the hydrography, the abundance of cod peaked within a restricted zone...

Climatic and non-climatic drivers of spatiotemporal maize-area dynamics across the northern limit for maize production

DEFF Research Database (Denmark)

Odgaard, Mette Vestergaard; Bøcher, Peder Klith; Dalgaard, Tommy

2011-01-01

It is expected that the ongoing anthropogenic climate change will drive changes in agricultural production and its geographic distribution. Here, we assess the extent to which climate change is already driving spatiotemporal dynamics in maize production in Denmark. We use advanced spatial...... regression modeling with multi-model averaging to assess the extent to which the recent spatiotemporal dynamics of the maize area in Denmark are driven by climate (temperature as represented by maize heating units [MHU] and growing-season precipitation), climate change and non-climatic factors (cattle...... cultivation and cattle farming, probably reflecting a change to a more favorable climate for maize cultivation: in the beginning of the study period, northern areas were mostly too cold for maize cultivation, irrespective of cattle density, but this limitation has been diminishing as climate has warmed...

LBA Regional Land Cover from AVHRR, 1-Degree, 1987 (Defries and Townshend)

Data.gov (United States)

National Aeronautics and Space Administration — This data set consists of a subset of a 1-degree global land cover product (DeFries and Townshend 1994). The subset was created for the study area of the Large Scale...

LBA Regional Land Cover from AVHRR, 8-km, 1984 (DeFries et al.)

Data.gov (United States)

National Aeronautics and Space Administration — ABSTRACT: This data set is a subset of an 8-km global land cover product (DeFries et al. 1998). This subset was created for the study area of the Large Scale...

Status of compost usage and its performance on vegetable production in Monga areas of Bangladesh

Directory of Open Access Journals (Sweden)

G.K.M.M. Rahman

2014-12-01

Full Text Available The present study was carried out to assess the existing status of compost usage on vegetable production and determine the overall effect of household waste compost (HWC on growth and yield of vegetables and enhancement of soil fertility in the monga areas of Bangladesh. A field survey was conducted on 152 sampled farmers during 2010 to 2011. Questionnaire containing both closed and open-ended questions were used to assess existing production practices of vegetables using compost in both homestead and field conditions. Three field trials at Badargonj and Kawnia upazilas of Rangpur district were conducted taking four treatments i.e. control, recommended doses (RD of fertilizers, HWC at the rate of 10 tha-1, and HWC 10 t ha-1 plus RD as IPNS based with Lal shak, Palong shak, Pui shak and Tomato. Base line survey results indicated inadequate knowledge of the farmers on use and preparation of the household waste compost. Yield data of all vegetables i.e. Tomato, Lal shak, Palong shak and Pui shak indicated that the combined application of nutrients using organic and inorganic sources were significantly better than that of solitary application of inorganic fertilizers. The potential of household waste compost applied @ 10 t ha-1 along with inorganic fertilizers applied was found highly satisfactory in producing Tomato, where yield was recorded 75 t ha-1 in the study area. The fresh yield of Palong shak was found 16 t ha-1 when recommended doses of inorganic fertilizers were applied, but it was about 19 t ha-1 under combined application of HWC @ 10 t ha-1 and inorganic fertilizers following IPNS concept. The fresh yield of Pui shak was found about 49 t ha-1 under combined application of organic and inorganic nutrients. Considering the availability and costs of different composts, it is evinced that HWC contained good amount of NPK which indicates its potentiality to be used as a soil amendment, improving soil fertility and crop productivity. It can be

Livestock Production - Future Directions and Priority Research Areas

Energy Technology Data Exchange (ETDEWEB)

Robinson, P.H., E-mail: phrobinson@ucdavis.edu [Department of Animal Science, University of California, Davis, CA (United States)

2014-07-15

While specific issues facing ruminant production differ in detail between developed and developing countries, the general constraints and challenges suggest that common research interests will continue to exist. The need to increase outputs of ruminant meat and milk products differ sharply between the developed and developing world, although a need to increase animal productivity is evident in both, albeit primarily to increase product output in the developing world but to decrease environmental impacts of food producing ruminants in the developed world. The largest single limitation to increasing productivity of ruminants in the low digestibility of the structural carbohydrates which comprise a large proportion of their diets. Research on actions of secondary compounds in ruminal metabolism is required to avoid their negative effects and harvest the benefits of their positive effects. Domesticated ruminants have historically provided a substantial portion of the world's supplies. However if that is to continue, ways must be found to increase digestibility of their primary feedstocks, increase the 'healthfulness' of their products to humans, and decrease the environmental impact of their production systems.

Livestock Production - Future Directions and Priority Research Areas

International Nuclear Information System (INIS)

Robinson, P.H.

2014-01-01

While specific issues facing ruminant production differ in detail between developed and developing countries, the general constraints and challenges suggest that common research interests will continue to exist. The need to increase outputs of ruminant meat and milk products differ sharply between the developed and developing world, although a need to increase animal productivity is evident in both, albeit primarily to increase product output in the developing world but to decrease environmental impacts of food producing ruminants in the developed world. The largest single limitation to increasing productivity of ruminants in the low digestibility of the structural carbohydrates which comprise a large proportion of their diets. Research on actions of secondary compounds in ruminal metabolism is required to avoid their negative effects and harvest the benefits of their positive effects. Domesticated ruminants have historically provided a substantial portion of the world's supplies. However if that is to continue, ways must be found to increase digestibility of their primary feedstocks, increase the 'healthfulness' of their products to humans, and decrease the environmental impact of their production systems

A Review of Australian Investigations on Aeronautical Fatigue during the Period April 1979 to March 1981.

Science.gov (United States)

1981-03-01

RD73 9. COST CODE: b. Sponsoring Agency: 27003 SUPPLY 50/2 10. IMPRINT: 11. COMPUTER PROGRAM(S) Aeronautical Research (Title(s) and language(s...laminates. 9/24 An advanced iso -parametric element is also being Jeveloped specifically for the analysis of disbonds and internal flaws in composite...FAILURE - STATION 119 iso I f FIG. 9.3 NOMAD STRLFCI URAl I AlT 10(L TESI FIG. 9.4 FAILED NOMAD STRUT UPPER END FITTING FIG. 9.5 FRACTURE FACES OF FAILED

The Development of a Project-Based Collaborative Technical Writing Model Founded on Learner Feedback in a Tertiary Aeronautical Engineering Program

Science.gov (United States)

Tatzl, Dietmar; Hassler, Wolfgang; Messnarz, Bernd; Fluhr, Holger

2012-01-01

The present article describes and evaluates collaborative interdisciplinary group projects initiated by content lecturers and an English-as-a-Foreign-Language (EFL) instructor for the purpose of teaching technical writing skills in an aeronautical engineering degree program. The proposed technical writing model is assessed against the results of a…

Funding and Strategic Alignment Guidance for Infusing Small Business Innovation Research Technology into Aeronautics Research Mission Directorate Projects for 2016

Science.gov (United States)

Nguyen, Hung D.; Steele, Gynelle C.

2017-01-01

This report is intended to help NASA program and project managers incorporate Small Business Innovation Research (SBIR) technologies into NASA Aeronautics Research Mission Directorate (ARMD) projects. Other Government and commercial project managers interested in ARMD funding opportunities through NASA's SBIR program will find this report useful as well.

14 CFR 61.407 - What aeronautical knowledge must I have to apply for a flight instructor certificate with a sport...

Science.gov (United States)

2010-01-01

... apply for a flight instructor certificate with a sport pilot rating? 61.407 Section 61.407 Aeronautics... CERTIFICATION: PILOTS, FLIGHT INSTRUCTORS, AND GROUND INSTRUCTORS Flight Instructors With a Sport Pilot Rating... sport pilot rating? (a) Except as specified in paragraph (c) of this section you must receive and log...

Global gradients in vertebrate diversity predicted by historical area-productivity dynamics and contemporary environment.

Directory of Open Access Journals (Sweden)

Walter Jetz

Full Text Available Broad-scale geographic gradients in species richness have now been extensively documented, but their historical underpinning is still not well understood. While the importance of productivity, temperature, and a scale dependence of the determinants of diversity is broadly acknowledged, we argue here that limitation to a single analysis scale and data pseudo-replication have impeded an integrated evolutionary and ecological understanding of diversity gradients. We develop and apply a hierarchical analysis framework for global diversity gradients that incorporates an explicit accounting of past environmental variation and provides an appropriate measurement of richness. Due to environmental niche conservatism, organisms generally reside in climatically defined bioregions, or "evolutionary arenas," characterized by in situ speciation and extinction. These bioregions differ in age and their total productivity and have varied over time in area and energy available for diversification. We show that, consistently across the four major terrestrial vertebrate groups, current-day species richness of the world's main 32 bioregions is best explained by a model that integrates area and productivity over geological time together with temperature. Adding finer scale variation in energy availability as an ecological predictor of within-bioregional patterns of richness explains much of the remaining global variation in richness at the 110 km grain. These results highlight the separate evolutionary and ecological effects of energy availability and provide a first conceptual and empirical integration of the key drivers of broad-scale richness gradients. Avoiding the pseudo-replication that hampers the evolutionary interpretation of non-hierarchical macroecological analyses, our findings integrate evolutionary and ecological mechanisms at their most relevant scales and offer a new synthesis regarding global diversity gradients.

Vegetation Characterization and Litter Production on the Rehabilitated Mined Area of Mussoorie Hills, India

Directory of Open Access Journals (Sweden)

Archana JOSHI

2013-12-01

Full Text Available The floristic diversity of four different age series in rehabilitated mined area which represents the degraded ecosystem was examined. Phytosociological analysis revealed that the highest number of plant species (38 nos. including tree, shrubs, herbs and grasses were found in eight years old (Site II rehabilitated site followed by eleven years old (Site I and six years old (Site 3 (33 nos. and least was in four years old Site IV (29 nos.. Maximum total basal area was represented by site I followed by site II, site III and site IV. With reference to annual litter production it was highest in Site I (5286 Kg/ha followed by Site III (1193.2 Kg/ha, Site II (804.0 kg/ha and least in Site IV (262.0 Kg/ha.

Innovation in Flight: Research of the NASA Langley Research Center on Revolutionary Advanced Concepts for Aeronautics

Science.gov (United States)

Chambers, Joseph R.

2005-01-01

The goal of this publication is to provide an overview of the topic of revolutionary research in aeronautics at Langley, including many examples of research efforts that offer significant potential benefits, but have not yet been applied. The discussion also includes an overview of how innovation and creativity is stimulated within the Center, and a perspective on the future of innovation. The documentation of this topic, especially the scope and experiences of the example research activities covered, is intended to provide background information for future researchers.

Prevalence and risk factor's analysis of bovine brucellosis in peri-urban areas under intensive system of production in Gujarat, India

Directory of Open Access Journals (Sweden)

M. D. Patel

2014-07-01

Full Text Available Aim: A study on surveillance of bovine brucellosis in dairy herds of peri-urban areas under intensive system of production was carried out by milk-ELISA. Various risk factors were identified having significant association with occurrence of bovine brucellosis in dairy herds of peri-urban areas. Materials and Methods: Five randomly selected peri-uban areas of six cities of Gujarat were included in the present study. Five randomly selected dairy herds under intensive system of production from each selected peri-urban area were included for further investigation. In total, 199 bulk and 582 individual milk samples were screened by milk-ELISA. Forty three different risk factors were identified and grouped into four major categories as general characteristics of farms, introduction of infection to farms, management systems of farms and exposure of disease. Further, their distribution and association with prevalence of bovine brucellosis was studied. Results: The overall herd and animal prevalence in peri-urban areas was 33.70 and 11.90%, respectively. Out of 11 risk factors on general characteristics of dairy farms, only five (herd size, type of animals, type of breed, age of owner and knowledge gained by owners showed significant (p<0.05 association with occurrence of bovine brucellosis. None of risk factors on introduction of infection to farms (n=6 and management systems of farms (n=11 was found significantly associated with occurrence of brucellosis. Among risk factors on exposure of disease (n=15, history of abortion, retention of placenta, still birth and metritis/endometritis showed significant (p<0.05 association with prevalence of bovine brucellosis. Conclusion: It was concluded that prevalence of bovine brucellosis in dairy herds under intensive system of production in peri-urban areas of Gujarat was comparatively higher than reported overall prevalence of brucellosis. Risk factors like larger herd in close confinement without adequate sheds

Decision making model for Foreign Object Debris/Damage (FOD) elimination in aeronautics using quantitative modeling approach

Science.gov (United States)

Lafon, Jose J.

(FOD) Foreign Object Debris/Damage has been a costly issue for the commercial and military aircraft manufacturers at their production lines every day. FOD can put pilots, passengers and other crews' lives into high-risk. FOD refers to any type of foreign object, particle, debris or agent in the manufacturing environment, which could contaminate/damage the product or otherwise undermine quality standards. Nowadays, FOD is currently addressed with prevention programs, elimination techniques, and designation of FOD areas, controlled access to FOD areas, restrictions of personal items entering designated areas, tool accountability, etc. All of the efforts mentioned before, have not shown a significant reduction in FOD occurrence in the manufacturing processes. This research presents a Decision Making Model approach based on a logistic regression predictive model that was previously made by other researchers. With a general idea of the FOD expected, elimination plans can be put in place and start eradicating the problem minimizing the cost and time spend on the prediction, detection and/or removal of FOD.

Ecology of litterfall production of giant bamboo Dendrocalamus asper in a watershed area

Directory of Open Access Journals (Sweden)

A.G. Toledo Bruno

2017-12-01

Full Text Available Giant bamboo Dendrocalamus asper is recommended in environmental and livelihood programs in the Philippines due to its various ecological, economic and social benefits. However, there are limited data on the ecology of giant bamboo litterfall production, which contributes to soil nutrient availability. Bamboo also contributed in carbon sequestration. The study was conducted within the Taganibong Watershed in Bukidnon, Philippines. Nine litterfall traps measuring 1mx1m were established within the giant bamboo stand in the study area. Results show that giant bamboo litterfall is dominated by leaves. Biological characteristics of bamboo litterfall do no not influence litterfall production but temperature, wind speed and humidity correlate with the amount of litterfall. Findings of the study further revealed that fresh giant bamboo tissue contains high carbon content and the soil in the bamboo stand has higher organic matter than the open clearing. These data indicate the role of giant bamboo in carbon sequestration and soil nutrient availability.

Dose-area product measurement for patients in diagnostic radiography

International Nuclear Information System (INIS)

Alkhawad, Safaa Ibrahim Awad Elkarim

2001-09-01

There is a wide spread of the utilization of medical diagnostic x-ray in Sudan upon the last years, in private clinics as well as in public hospitals. The aim of this study was to measure the doses to patients from x-ray in radiography departments in Khartoum State. Use was made of ionization chamber that measures the product of dose times the exposed area of the patient in units of Gy cm 2 . The work was performed in 7 hospitals over 250 patients. 71.2% of the patients were males and 28.8% females. From this work, it appears that the chest radiography represent 42% of the total exposure of human body organs to radiography, there was also a clear variation in doses resulting from this exposure for different x-ray machines. The results of this study were compared with similar from Germany, Finland, New Zealand and Norway; which are recently available studies. The comparison showed those investigation of abdomen, spine and pelvis result in higher radiation doses. No data for limb exposure were obtained from these countries, in Sudan exposure of the limb carry radiation doses compared to the rest of the human body.(Author)

Shallow groundwater quality and geochemistry in the Fayetteville Shale gas-production area, north-central Arkansas, 2011

Science.gov (United States)

Kresse, Timothy M.; Warner, Nathaniel R.; Hays, Phillip D.; Down, Adrian; Vengosh, Avner; Jackson, Robert B.

2012-01-01

The Mississippian Fayetteville Shale serves as an unconventional gas reservoir across north-central Arkansas, ranging in thickness from approximately 50 to 550 feet and varying in depth from approximately 1,500 to 6,500 feet below the ground surface. Primary permeability in the Fayetteville Shale is severely limited, and successful extraction of the gas reservoir is the result of advances in horizontal drilling techniques and hydraulic fracturing to enhance and develop secondary fracture porosity and permeability. Drilling and production of gas wells began in 2004, with a steady increase in production thereafter. As of April 2012, approximately 4,000 producing wells had been completed in the Fayetteville Shale. In Van Buren and Faulkner Counties, 127 domestic water wells were sampled and analyzed for major ions and trace metals, with a subset of the samples analyzed for methane and carbon isotopes to describe general water quality and geochemistry and to investigate the potential effects of gas-production activities on shallow groundwater in the study area. Water-quality analyses from this study were compared to historical (pregas development) shallow groundwater quality collected in the gas-production area. An additional comparison was made using analyses from this study of groundwater quality in similar geologic and topographic areas for well sites less than and greater than 2 miles from active gas-production wells. Chloride concentrations for the 127 groundwater samples collected for this study ranged from approximately 1.0 milligram per liter (mg/L) to 70 mg/L, with a median concentration of 3.7 mg/L, as compared to maximum and median concentrations for the historical data of 378 mg/L and 20 mg/L, respectively. Statistical analysis of the data sets revealed statistically larger chloride concentrations (p-value gas extraction activities. Major ions and trace metals additionally had lower concentrations in data gathered for this study than in the historical

OMI/Aura Aerosol product Multi-wavelength Algorithm Zoomed 1-Orbit L2 Swath 13x12km V003 (OMAEROZ) at GES DISC

Data.gov (United States)

National Aeronautics and Space Administration — The reprocessed OMI/Aura Level-2 Zoomed Aerosol data product OMAEROZ at 13x12 km resolution have been made available from the NASA Goddard Earth Sciences Data and...

Internet Reagency: The Implications of a Global Science for Collaboration, Productivity, and Gender Inequity in Less Developed Areas

Science.gov (United States)

Miller, B. Paige; Duque, Ricardo; Anderson, Meredith; Ynalvez, Marcus Antonius; Palackal, Antony; Dzorgbo, Dan-Bright S.; Mbatia, Paul N.; Shrum, Wesley

This article focuses on the nature of scientific research in less developed areas in the context of new information and communication technologies (ICTs). We examine the notion that the internet will globalize the practice of science by creating connections between researchers from geographically dispersed areas. By altering the spatial and temporal mechanisms through which professional ties are developed and maintained, internet access and use in less developed areas may change the nature of knowledge production or simply reproduce traditional practices and relationships. The diffusion of the internet to Africa, Asia, and Latin America requires us to go beyond traditional views of development and technology transfer, to contemporary neo-institutional and reagency perspectives. The potential of the internet to globalize science, however, is largely dependent on the places and institutions in which it is used, as well as the identities of its users. Reviewing data collected in Africa and Asia since 1994, we summarize findings on access to and use of the internet and its impact on scientific productivity, collaboration, networking, and gender inequity.

[How to carry out work on family planning after adopting production responsibility systems in rural areas].

Science.gov (United States)

Xiao, S H

1982-05-29

After the Third Meeting of the Eleventh People's Congress, the entire responsibility for agricultural production was transferred to a lower level. Peasants in various areas have adopted the so called production responsibility system, and the phenomenon of an increased population rate has also appeared in some areas. In this article, the author discusses how to solve these problems created by the new situation. The 1st step is try to control population growth through socialist propaganda education, administrative measures, economic incentives and punishments, and family planning work. The 2nd step is to popularize the practice of having only 1 child per household in the rural areas. The 2nd and 3rd child in each family should be controlled and prohibited. This policy formulated by the Central Government should be carried out thoroughly. Families which follow the policy and have only 1 child should be encouraged with economic rewards, and those families which have 2 or more children should be punished economically. The 3rd step is to establish a national work team to be in charge of family planning and birth control. There should be an ideological unity among the nation's leadership. Party members and cadres should establish themselves as good examples for the people so that the population control work may become successful.

NASA Ames Sustainability Initiatives: Aeronautics, Space Exploration, and Sustainable Futures

Science.gov (United States)

Grymes, Rosalind A.

2015-01-01

In support of the mission-specific challenges of aeronautics and space exploration, NASA Ames produces a wealth of research and technology advancements with significant relevance to larger issues of planetary sustainability. NASA research on NexGen airspace solutions and its development of autonomous and intelligent technologies will revolutionize both the nation's air transporation systems and have applicability to the low altitude flight economy and to both air and ground transporation, more generally. NASA's understanding of the Earth as a complex of integrated systems contributes to humanity's perception of the sustainability of our home planet. Research at NASA Ames on closed environment life support systems produces directly applicable lessons on energy, water, and resource management in ground-based infrastructure. Moreover, every NASA campus is a 'city'; including an urbanscape and a workplace including scientists, human relations specialists, plumbers, engineers, facility managers, construction trades, transportation managers, software developers, leaders, financial planners, technologists, electricians, students, accountants, and even lawyers. NASA is applying the lessons of our mission-related activities to our urbanscapes and infrastructure, and also anticipates a leadership role in developing future environments for living and working in space.

Proposed procedure and analysis of results to verify the indicator of the product dose-area in radiology equipment

International Nuclear Information System (INIS)

Garcia Marcos, R.; Gallego Franco, P.; Sierra Diaz, F.; Gonzalez Ruiz, C.; Rodriguez Checa, M.; Brasa Estevez, M.; Gomez Calvar, R.

2013-01-01

The aim of this work is to establish a procedure to verify the value of the product dose-area showing certain teams of Radiology, with an alternative to the use of external transmission cameras. (Author)

Product kerma air area and effective dose in dental radiology; Produto kerma no ar-area e dose efetiva em radiodiagnostico odontologico

Energy Technology Data Exchange (ETDEWEB)

Mauro, Rodrigo A.P.; Souza, M. Daiane M.; Costa, Alessandro M. [Universidade de Sao Paulo (USP), Ribeirao Preto (USP), SP (Brazil). Faculdade de Filosofia Ciencias e Letras

2016-07-01

The main purpose of patient dosimetry in diagnostic radiology is to determine dosimetric quantities for the establishment and use of reference levels and comparative risk assessment. The use of the air kerma-area product, P{sub KA}, has been suggested in dental radiology, as this quantity is more closely related to risk. The aim of this study was to perform a preliminary survey of P{sub KA} and effective dose in different types of dental examinations. The future perspective is a large-scale survey for the establishment and use of diagnostic reference levels in dentistry in Brazil. (author)

Product kerma air area and effective dose in dental radiology; Produto kerma no ar area e dose efetiva em radiodiagnostico odontologico

Energy Technology Data Exchange (ETDEWEB)

Mauro, Rodrigo A.P.; Souza, Daiane M.; Costa, Alessandro M., E-mail: rodrigomauro@usp.br [Universidade de Sao Paulo (USP), Ribeirao Preto, SP (Brazil). Faculdade de Filosofia Ciencias e Letras

2016-07-01

The main purpose of patient dosimetry in diagnostic radiology is to determine dosimetric quantities for the establishment and use of reference levels and comparative risk assessment. The use of the air kerma-area product, P{sub KA}, has been suggested in dental radiology, as this quantity is more closely related to risk. The aim of this study was to perform a preliminary survey of P{sub KA} and effective dose in different types of dental examinations. The future perspective is a large-scale survey for the establishment and use of diagnostic reference levels in dentistry in Brazil. (author)

Publications of the Division of Mechanical Engineering and the National Aeronautical Establishment. Series Number 2, Supplement Number 7.

Science.gov (United States)

1982-01-01

made in the linear cases. LR-600 A COMPARISON OF METHODS FOR CALIBRATION AND USE OF MULTI- COMPONENT STRAIN GAUGE WIND TUNNEL BALANCES Galway, R.D...National Aeronautical Establishment, March 1980. A method is presented for calibration of strain - gauge balances which does not require that the...operations during visual flight conditions. LR-604 A KALMAN FILTER APPROACH TO NAVIGATION ON THE NAE CONVAIR 580 AEROMAGNETICS RESEARCH AIRCRAFT. Leach

Assessing variability and long-term trends in burned area by merging multiple satellite fire products

Directory of Open Access Journals (Sweden)

L. Giglio

2010-03-01

Full Text Available Long term, high quality estimates of burned area are needed for improving both prognostic and diagnostic fire emissions models and for assessing feedbacks between fire and the climate system. We developed global, monthly burned area estimates aggregated to 0.5° spatial resolution for the time period July 1996 through mid-2009 using four satellite data sets. From 2001–2009, our primary data source was 500-m burned area maps produced using Moderate Resolution Imaging Spectroradiometer (MODIS surface reflectance imagery; more than 90% of the global area burned during this time period was mapped in this fashion. During times when the 500-m MODIS data were not available, we used a combination of local regression and regional regression trees developed over periods when burned area and Terra MODIS active fire data were available to indirectly estimate burned area. Cross-calibration with fire observations from the Tropical Rainfall Measuring Mission (TRMM Visible and Infrared Scanner (VIRS and the Along-Track Scanning Radiometer (ATSR allowed the data set to be extended prior to the MODIS era. With our data set we estimated that the global annual area burned for the years 1997–2008 varied between 330 and 431 Mha, with the maximum occurring in 1998. We compared our data set to the recent GFED2, L3JRC, GLOBCARBON, and MODIS MCD45A1 global burned area products and found substantial differences in many regions. Lastly, we assessed the interannual variability and long-term trends in global burned area over the past 13 years. This burned area time series serves as the basis for the third version of the Global Fire Emissions Database (GFED3 estimates of trace gas and aerosol emissions.

Investigation of an expert health monitoring system for aeronautical structures based on pattern recognition and acousto-ultrasonics

Science.gov (United States)

Tibaduiza-Burgos, Diego Alexander; Torres-Arredondo, Miguel Angel

2015-08-01

Aeronautical structures are subjected to damage during their service raising the necessity for periodic inspection and maintenance of their components so that structural integrity and safe operation can be guaranteed. Cost reduction related to minimizing the out-of-service time of the aircraft, together with the advantages offered by real-time and safe-life service monitoring, have led to a boom in the design of inexpensive and structurally integrated transducer networks comprising actuators, sensors, signal processing units and controllers. These kinds of automated systems are normally referred to as smart structures and offer a multitude of new solutions to engineering problems and multi-functional capabilities. It is thus expected that structural health monitoring (SHM) systems will become one of the leading technologies for assessing and assuring the structural integrity of future aircraft. This study is devoted to the development and experimental investigation of an SHM methodology for the detection of damage in real scale complex aeronautical structures. The work focuses on each aspect of the SHM system and highlights the potentialities of the health monitoring technique based on acousto-ultrasonics and data-driven modelling within the concepts of sensor data fusion, feature extraction and pattern recognition. The methodology is experimentally demonstrated on an aircraft skin panel and fuselage panel for which several damage scenarios are analysed. The detection performance in both structures is quantified and presented.

Interference Analysis Status and Plans for Aeronautical Mobile Airport Communications System (AeroMACS)

Science.gov (United States)

Kerczewski, Robert J.; Wilson, Jeffrey D.

2010-01-01

Interference issues related to the operation of an aeronautical mobile airport communications system (AeroMACS) in the C-Band (specifically 5091-5150 MHz) is being investigated. The issue of primary interest is co-channel interference from AeroMACS into mobile-satellite system (MSS) feeder uplinks. The effort is focusing on establishing practical limits on AeroMACS transmissions from airports so that the threshold of interference into MSS is not exceeded. The analyses are being performed with the software package Visualyse Professional, developed by Transfinite Systems Limited. Results with omni-directional antennas and plans to extend the models to represent AeroMACS more accurately will be presented. These models should enable realistic analyses of emerging AeroMACS designs to be developed from NASA Test Bed, RTCA 223, and European results.

[Scientific production in microbiology and affinity areas in Spain during 1990-2002].

Science.gov (United States)

Ramos, José Manuel; Gutiérrez, Félix; Royo, Gloria

2005-01-01

To analyze the production and repercussions of the scientific activity of Spanish authors in the fields of microbiology, mycology, parasitology and virology. Documents published during the period of 1990 to 2000 compiled on the MEDLINE database >(WEBSPIRS 4.2) were retrieved using the following search terms ("Spain" OR "Espana") AND ("microb*" OR "virol*" OR "parasit*" OR "bacter*" OR "micol*" OR "mycol*" OR "retrovirus*) in the field, author's address. A total of 5259 documents were retrieved. Over the period studied, the number of documents published annually increased two-fold, from 256 documents in 1990 to 512 in 2002 (r = 0.92; p < 0.001), particularly those in foreign journals, from 175 to 447 documents (r = 0.95; p < 0.001). 50.9% of the documents came from universities, 35.8% from hospitals, 5.4% from the Consejo Superior de Investigaciones Científicas (CSIC) (5.4%), and 5.3% from the Instituto de Salud Carlos III. The CSIC centers (r 2 = 0.90), and universities (r 2 = 0.88) showed the highest rate of growth in the number of publications. The University of Barcelona (5.3%) had the largest number of publications among teaching institutions and Hospital Ramón y Cajal (2.9%) was the first among hospitals. The Autonomous Communities of Madrid (29.2%) and Catalonia (17.5%) showed the highest scientific production. The mean expected impact factor for all the published documents was 2.340. The expected impact factor grew from 1.977 in 1990 to 2.507 en 2002 (r 2 = 0.81). The published scientific production of Spanish researchers and the repercussion of these studies in the field of microbiology and related areas increased during the period of 1990 to 2002, particularly in the number of articles published in foreign journals. The Universities are the most productive institutions in this field.

A complete process for production of flexible large area polymer solar cells entirely using screen printing-First public demonstration

DEFF Research Database (Denmark)

Krebs, Frederik C; Jørgensen, Mikkel; Norrman, Kion

2009-01-01

, complete processing in air using commonly available screen printing, and finally, simple mechanical encapsulation using a flexible packaging material and electrical contacting post-production using crimped contacts. We detail the production of more than 2000 modules in one production run and show......A complete polymer solar cell module prepared in the ambient atmosphere under industrial conditions is presented. The versatility of the polymer solar cell technology is demonstrated through the use of abstract forms for the active area, a flexible substrate, processing entirely from solution...

A novel approach for in vitro meat production.

Science.gov (United States)

Pandurangan, Muthuraman; Kim, Doo Hwan

2015-07-01

The present review describes the possibility of in vitro meat production with the help of advanced co-culturing methods. In vitro meat production method could be a possible alternative for the conventional meat production. Originally, the research on in vitro meat production was initiated by the National Aeronautics and Space Administration (NASA) for space voyages. The required key qualities for accepting in vitro meat for consumption would be good efficiency ratio, increased protein synthesis rate in skeletal muscles, and mimicking the conventional meat qualities. In vitro culturing of meat is possible with the use of skeletal muscle tissue engineering, stem cell, cell co-culture, and tissue culture methods. Co-culture of myoblast and fibroblast is believed as one of the major techniques for in vitro meat production. In our lab, we have co-cultured myoblast and fibroblast. We believe that a billion pounds of in vitro meat could be produced from one animal for consumption. However, we require a great deal of research on in vitro meat production.

Evaluation of the MODIS Albedo Product over a Heterogeneous Agricultural Area

Science.gov (United States)

Sobrino, Jose Antonio; Franch, B.; Oltra-Carrio, R.; Vermote, E. F.; Fedele, E.

2013-01-01

In this article, the Moderate Resolution Imaging Spectroradiometer (MODIS) Bidirectional Reflectance Distribution Function (BRDF)/Albedo product (MCD43) is evaluated over a heterogeneous agricultural area in the framework of the Earth Observation: Optical Data Calibration and Information Extraction (EODIX) project campaign, which was developed in Barrax (Spain) in June 2011. In this method, two models, the RossThick-LiSparse-Reciprocal (RTLSR) (which corresponds to the MODIS BRDF algorithm) and the RossThick-Maignan-LiSparse-Reciprocal (RTLSR-HS), were tested over airborne data by processing high-resolution images acquired with the Airborne Hyperspectral Scanner (AHS) sensor. During the campaign, airborne images were retrieved with different view zenith angles along the principal and orthogonal planes. Comparing the results of applying the models to the airborne data with ground measurements, we obtained a root mean square error (RMSE) of 0.018 with both RTLSR and RTLSR-HS models. The evaluation of the MODIS BRDF/Albedo product (MCD43) was performed by comparing satellite images with AHS estimations. The results reported an RMSE of 0.04 with both models. Additionally, taking advantage of a homogeneous barley pixel, we compared in situ albedo data to satellite albedo data. In this case, the MODIS albedo estimation was (0.210 +/- 0.003), while the in situ measurement was (0.204 +/- 0.003). This result shows good agreement in regard to a homogeneous pixel.

The Boolean Algebra of Cubical Areas as a Tensor Product in the Category of Semilattices with Zero

Directory of Open Access Journals (Sweden)

Nicolas Ninin

2014-10-01

Full Text Available In this paper we describe a model of concurrency together with an algebraic structure reflecting the parallel composition. For the sake of simplicity we restrict to linear concurrent programs i.e. the ones with no loops nor branching. Such programs are given a semantics using cubical areas. Such a semantics is said to be geometric. The collection of all these cubical areas enjoys a structure of tensor product in the category of semi-lattice with zero. These results naturally extend to fully fledged concurrent programs up to some technical tricks.

Funding and Strategic Alignment Guidance for Infusing Small Business Innovation Research Technology Into Aeronautics Research Mission Directorate Programs and Projects for 2015

Science.gov (United States)

Nguyen, Hung D.; Steele, Gynelle C.

2016-01-01

This report is intended to help NASA program and project managers incorporate Small Business Innovation Research/Small Business Technology Transfer (SBIR)/(STTR) technologies into NASA Aeronautics Research Mission Directorate (ARMD) projects. Other Government and commercial projects managers can also find this useful.

Occurrence of Transgenic Feral Alfalfa (Medicago sativa subsp. sativa L.) in Alfalfa Seed Production Areas in the United States.

Science.gov (United States)

Greene, Stephanie L; Kesoju, Sandya R; Martin, Ruth C; Kramer, Matthew

2015-01-01

The potential environmental risks of transgene exposure are not clear for alfalfa (Medicago sativa subsp. sativa), a perennial crop that is cross-pollinated by insects. We gathered data on feral alfalfa in major alfalfa seed-production areas in the western United States to (1) evaluate evidence that feral transgenic plants spread transgenes and (2) determine environmental and agricultural production factors influencing the location of feral alfalfa, especially transgenic plants. Road verges in Fresno, California; Canyon, Idaho; and Walla Walla, Washington were surveyed in 2011 and 2012 for feral plants, and samples were tested for the CP4 EPSPS protein that conveys resistance to glyphosate. Of 4580 sites surveyed, feral plants were observed at 404 sites. Twenty-seven percent of these sites had transgenic plants. The frequency of sites having transgenic feral plants varied among our study areas. Transgenic plants were found in 32.7%, 21.4.7% and 8.3% of feral plant sites in Fresno, Canyon and Walla Walla, respectively. Spatial analysis suggested that feral populations started independently and tended to cluster in seed and hay production areas, places where seed tended to drop. Significant but low spatial auto correlation suggested that in some instances, plants colonized nearby locations. Neighboring feral plants were frequently within pollinator foraging range; however, further research is needed to confirm transgene flow. Locations of feral plant clusters were not well predicted by environmental and production variables. However, the likelihood of seed spillage during production and transport had predictive value in explaining the occurrence of transgenic feral populations. Our study confirms that genetically engineered alfalfa has dispersed into the environment, and suggests that minimizing seed spillage and eradicating feral alfalfa along road sides would be effective strategies to minimize transgene dispersal.

Mixed Waste Focus Area mercury contamination product line: An integrated approach to mercury waste treatment and disposal

International Nuclear Information System (INIS)

Hulet, G.A.; Conley, T.B.; Morris, M.I.

1998-01-01

The US Department of Energy (DOE) Mixed Waste Focus Area (MWFA) is tasked with ensuring that solutions are available for the mixed waste treatment problems of the DOE complex. During the MWFA's initial technical baseline development process, three of the top four technology deficiencies identified were related to the need for amalgamation, stabilization, and separation/removal technologies for the treatment of mercury and mercury-contaminated mixed waste. The focus area grouped mercury-waste-treatment activities into the mercury contamination product line under which development, demonstration, and deployment efforts are coordinated to provide tested technologies to meet the site needs. The Mercury Working Group (HgWG), a selected group of representatives from DOE sites with significant mercury waste inventories, is assisting the MWFA in soliciting, identifying, initiating, and managing efforts to address these areas. Based on the scope and magnitude of the mercury mixed waste problem, as defined by HgWG, solicitations and contract awards have been made to the private sector to demonstrate amalgamation and stabilization processes using actual mixed wastes. Development efforts are currently being funded under the product line that will address DOE's needs for separation/removal processes. This paper discusses the technology selection process, development activities, and the accomplishments of the MWFA to date through these various activities

Production of Landsat ETM+ reference imagery of burned areas within Southern African savannahs: comparison of methods and application to MODIS

Science.gov (United States)

A. M. S. Smith; N. A. Drake; M. J. Wooster; A. T. Hudak; Z. A. Holden; C. J. Gibbons

2007-01-01

Accurate production of regional burned area maps are necessary to reduce uncertainty in emission estimates from African savannah fires. Numerous methods have been developed that map burned and unburned surfaces. These methods are typically applied to coarse spatial resolution (1 km) data to produce regional estimates of the area burned, while higher spatial resolution...

The Guggenheim Aeronautics Laboratory at Caltech and the creation of the modern rocket motor (1936-1946): How the dynamics of rocket theory became reality

Science.gov (United States)

Zibit, Benjamin Seth

This thesis explores and unfolds the story of discovery in rocketry at The California Institute of Technology---specifically at Caltech's Guggenheim Aeronautics Laboratory---in the 1930s and 1940s. Caltech was home to a small group of engineering students and experimenters who, beginning in the winter of 1935--1936, formed a study and research team destined to change the face of rocket science in the United States. The group, known as the Guggenheim Aeronautics Laboratory (GALCIT, for short) Rocket Research Group, invented a new type of solid-rocket propellant, made distinct and influential discoveries in the theory of rocket combustion and design, founded the Jet Propulsion Laboratory, and incorporated the first American industrial concern devoted entirely to rocket motor production: The Aerojet Corporation. The theoretical work of team members, Frank Malina, Hsueh-shen Tsien, Homer J. Stewart, and Mark Mills, is examined in this thesis in detail. The author scrutinizes Frank Malina's doctoral thesis (both its assumptions and its mathematics), and finds that, although Malina's key assertions, his formulae, hold, his work is shown to make key assumptions about rocket dynamics which only stand the test of validity if certain approximations, rather than exact measurements, are accepted. Malina studied the important connection between motor-nozzle design and thrust; in his Ph.D. thesis, he developed mathematical statements which more precisely defined the design/thrust relation. One of Malina's colleagues on the Rocket Research Team, John Whiteside Parsons, created a new type of solid propellant in the winter of 1941--1942. This propellant, known as a composite propellant (because it simply was a relatively inert amalgam of propellant and oxidizer in non-powder form), became the forerunner of all modern solid propellants, and has become one of the seminal discoveries in the field of Twentieth Century rocketry. The latter chapters of this dissertation discuss the

Contractors Road Heavy Equipment Area SWMU 055 Corrective Measures Implementation Progress Report

Science.gov (United States)

Dorman, Lane

2015-01-01

This Corrective Measures Implementation (CMI) Progress Report, Revision 1, for Contractor's Road Heavy Equipment (CRHE) Area Solid Waste Management Unit (SWMU) Number 055 was prepared by Geosyntec Consultants (Geosyntec) for the National Aeronautics and Space Administration (NASA) under contract number NNK09CA02B, Delivery Order NNK09CA62D and Project Number PCN ENV-2324. This CMI Progress Report documents: (i) activities conducted as part of supplemental assessment activities completed from June 2009 through November 2014; (ii) Engineering Evaluation (EE) Advanced Data Packages (ADPs); and (iii) recommendations for future activities related to corrective measures at the Site.

Summary of Jimsphere wind profiles: Programs, data, comments, part 1. [for use in aeronautical vehicle design and engineering

Science.gov (United States)

Willett, J. A.

1979-01-01

Jimsphere wind profiles are documented for the following ranges and installations: Eastern Test Range, Cape Kennedy, Florida; Western Test Range; Point Mugu, California; White Sands Missile Range, New Mexico; Wallops Island, Virginia; Green River, Utah; and Vandenberg Air Force Base, California. Profile information for 1964-1977 includes data summaries, computer formats, frequency distributions, composite listings, etc., for use in establishing and interpreting natural environment criteria for aeronautical vehicle design and engineering operations.

Determination of trace elements in coffee beans by XRF spectrometer equipped with polarization optics and its application to identification of their production area

International Nuclear Information System (INIS)

Akamine, Takao; Otaka, Akiko; Nakai, Izumi; Hokura, Akiko; Ito, Yuji

2010-01-01

The production area of coffee beans becomes a brand name, which gives reputations for the products, which is related to the price. This leads to room for mislabeling the products by unscrupulous market dealers. A rapid and easy method for the analysis of trace-element composition of coffee beans, which could be a good indicator of their production area, was studied in the present work. Coffee beans of 6 different regions (Brazil, Colombia, Vietnam, Indonesia, Tanzania, Guatemala) were analyzed by using a highly sensitive X-ray fluorescence spectrometer with three dimensional polarization optics. The experimental conditions were optimized so as to analyze 6 elements (Mn, Fe, Ni, Rb, Sr, Ba) in coffee beans, and linear calibration curves were obtained for the quantitative analysis of those elements. The analytical results were used in principal-component analysis to classify the coffee beans according to the geographical origin, which results in a successful characterization of the 6 production areas. It is found that roasted beans can be used with the same criterion as their green beans. Consequently, a rapid and easy way for the characterization of the geographic origin of coffee beans has been established in this study. (author)

Landscape Changes and a Salt Production Sustainable Approach in the State of Salt Pan Area Decreasing on the Coast of Tianjin, China

Directory of Open Access Journals (Sweden)

Hui Wang

2015-07-01

Full Text Available Landsat images from 1979, 1988, 1999, 2008, and 2013 were used to analyze the landscape area change of salt pans lying on the coast of Tianjin. While initially (1979–1988, the area of Tianjin’s salt pan increased, later (1988–2013 it declined dramatically. In the first phase (1979–1988 of the studied period the primary roll-in landscape of the salt pan wasbarren land with an area of 60.0 km2. By 1988, the area of Tianjin’s salt pan rose to 457.8 km2. The main roll-out landscape of the salt pan during 1988–2013 was urban, barren land, village/town, harbor, and road whose area amounted to 69.8, 35.9, 27.3, 25.5 and 18.4 km2 respectively. The roll-out barren land will be transformed to construction land ultimately. By 2013, the total loss reached 167.3 km2, which was 36.5% of the salt pan area of Tianjin in 1988. With the development of coastal economy, the salterns with a lower economic value were transformed to and replaced by land use types with a higher economic value. This trend would influence the production of sea salt and the development of sodium hydroxide and sodium carbonate industries. Seawater desalination provides an opportunity for the restoration and compensation of salt production capacity. Based on the theory of circular economy and industrial symbiosis, in this article an industrial symbiosis model for sea salt production and sea water desalination is explored: “mariculture–power plant cooling–seawater desalination–Artemia culture–bromide extraction–sea salt production–salt chemical industry”. Through the application of this process sustainable development of the sea salt production in Tianjin could be achieved.

Increasing cocoa productivity and farmer capacity in surrounding area of PT Kaltim Prima Coal and PT Berau Coal

Directory of Open Access Journals (Sweden)

J.B.Baon

2014-01-01

Full Text Available Based on agro-climate factors, most of surrounding area of coal mining sites in Indonesia is suitable for cocoa cultivation. However, most of cocoa farmers in the environs of coal mining sites have little access both to new technology of cocoa cultivation and to market of their cocoa products. Therefore, productivity of cocoa farms and the income of cocoa farmers are low, which may disturb social responsibility of the coal mining companies present in their surroundings. These are the consequences of poor interaction between the government, private sector and research sector. The aim of this study is to transfer and to implement good agricultural practices of cocoa in surrounding area of mining sites of Kaltim Prima Coal (KPC and Berau Coal (BC, East Kalimantan, in order to increase farmer capacity and cocoa productivity. Indonesian Coffee and Cocoa Research Institute as the developing agent of cocoa technology has established collaboration with corporate social responsibility program of KPC (already 7 years and BC (already 2 years to improve productivity and farmer capacity of cocoa farms surroundings the two cocoa mining companies. This paper discusses the aspects of natural, economic and human resources; baseline study; technology transfers; marketing partnership; cocoa productivity; farmer income after technology implementing; study of cocoa growth on post-coal-mining. It is concluded that improvement of the cocoa productivity and farmer capacity surroundings the two mining sites associated with high adoption of technology by farmers, better access to availability of knowledge for good agricultural practices, extension officers, demonstration plots, cocoa price, and length of market chains, partnership, and competition with oil palm plantations.

Dynamics of forest ecosystems regenerated on burned and harvested areas in mountain regions of Siberia: characteristics of biological diversity, structure and productivity

Directory of Open Access Journals (Sweden)

I. M. Danilin

2016-12-01

Full Text Available Complex estimation of forest ecosystems dynamics based on detailing characteristics of structure, growth and productivity of the stands and describing general geographical and biological management options for preserving their biodiversity and sustaining stability are discussed in the paper by describing examples of tree stands restored on burned and logged areas in mountain regions of Siberia. On vast areas in Siberia, characterized as sub-boreal, subarid and with a strongly continental climate, forests grow on seasonally frozen soils and in many cases are surrounded by vast steppe and forest-steppe areas and uplands. Developing criteria for sustainability of mountain forest ecosystems is necessary for forest resource management and conservation. It is therefore important to obtain complex biometric characteristics on forest stands and landscapes and to thoroughly study their structure, biological diversity and productivity. Morphometric methods, Weibull simulation and allometric equations were used to determine the dimensional hierarchies of coenopopulation individuals. Structure and productivity of the aboveground stand components were also studied.

Phytoremediative urban design: Transforming a derelict and polluted harbour area into a green and productive neighbourhood

International Nuclear Information System (INIS)

Wilschut, M.; Theuws, P.A.W.; Duchhart, I.

2013-01-01

Many urban areas are polluted by industrial activities and waste disposal in landfills. Since conventional soil remediation techniques are costly and unsustainable, phytoremediation might offer an alternative. In this article, we explore how phytoremediation can be integrated into the transformation of urban post-industrial areas, while improving public space. Buiksloterham, a polluted and deprived industrial area in Amsterdam, serves as case study. Buiksloterham is polluted with heavy metals, with Zinc (Zn) concentrations being the highest. A regression-model for Alpine Pennycress (Thlaspi caerulescens) is used to estimate the time needed to remediate the site. This reveals a conflict in time between remediation and urban development. A research by design experiment shows how to overcome this conflict by dealing with polluted soil innovatively while emphasizing spatial and aesthetic qualities of the phytoremediation plant species. The resulting landscape framework integrates phytoremediation with biomass production and gives new ecological, economic and social value to Buiksloterham. -- Highlights: ► Design can provide a link between the field of science and the field of practice. ► Design translates scientific knowledge into a specific aesthetic spatial composition. ► A landscape framework makes phytoremediation feasible in an urban context. ► Estimated time for phytoremediation conflicts with urban developments. ► Phytoremediation combined with biomass production is a feasible temporal land-use. -- A research by design method can translate scientific knowledge on phytoremediation into an aesthetic spatial composition for a specific site, thereby linking science and practice

Mobile Launch Platform Vehicle Assembly Area (SWMU 056) Biosparge Expansion Interim Measures Work Plan

Science.gov (United States)

Burcham, Michael S.; Daprato, Rebecca C.

2016-01-01

This document presents the design details for an Interim Measure (IM) Work Plan (IMWP) for the Mobile Launch Platform/Vehicle Assembly Building (MLPV) Area, located at the John F. Kennedy Space Center (KSC), Florida. The MLPV Area has been designated Solid Waste Management Unit Number 056 (SWMU 056) under KSC's Resource Conservation and Recovery Act (RCRA) Corrective Action Program. This report was prepared by Geosyntec Consultants (Geosyntec) for the National Aeronautics and Space Administration (NASA) under contract number NNK09CA02B and NNK12CA13B, project control number ENV1642. The Advanced Data Package (ADP) presentation covering the elements of this IMWP report received KSC Remediation Team (KSCRT) approval at the December 2015 Team Meeting; the meeting minutes are included in Appendix A.

Analysing innovation policy indicators through a functional approach: the aeronautic industry case

Energy Technology Data Exchange (ETDEWEB)

Haddad, C.R.; Uriona Maldonado, M.

2016-07-01

Developing countries face different problems than developed countries and the use of the same indicator to evaluate and compare both regions can lead to misleading conclusions. Traditional indicators, such as R&D and patents may not capture the whole dynamic of a system, as they are used to compare systems focusing on its current structure. Many authors have been discussing the processes underlying industry transformation, innovation, and economic growth to access a system performance, i.e. the functions of innovation systems. Therefore, the purpose of this paper is to analyze these functions as indicators to measure the performance of the system in order to identify policy issues. In order to do that, we analyze the case of the aeronautic sectoral system of innovation of a region in Brazil. The functional approach helped us to better capture the dynamic of the system, by not restricting our analysis to the system’s structure. (Author)

Typology of production systems in the rural area of Ibague, Colombia.

Directory of Open Access Journals (Sweden)

Cristina Rocha-Rodríguez

2016-06-01

Full Text Available The aim of this study was to perform a classification of the farms in the rural area of Ibague, Colombia. Between March and April 2013, 55 surveys were applied in five districts. The survey covered human, social, physical, financial, and natural aspects. The classification showed three types of farms: group 1 had a significant proportion of soil under pastures (3.71 ± 5.88 ha and these were typical systems of peasant economy, which combine agricultural and livestock activities. Group 2 was basically made up of farms dedicated to grow coffee; its surface was small (3.15 ± 2,31 ha. In group 3, farms with land use under pastures predominated; these farms had atypical characteristics, particularly by its size (52.43 ± 111.51 ha. Both agricultural and livestock productive diversity predominated, as well as the typical social heterogeneity of peasant societies.

The AreA transcription factor in Fusarium graminearum regulates the use of some nonpreferred nitrogen sources and secondary metabolite production

DEFF Research Database (Denmark)

Giese, Nanna Henriette; Sondergaard, Teis Esben; Sorensen, Jens Laurids

2013-01-01

and asparagine was found to be a preferential nitrogen source for F. graminearum. Deletion of areA led to poor growth on NaNO3 suggesting its involvement in regulation of the nitrate reduction process. In addition utilization of aspartic acid, histidine, isoleucine, leucine, threonine, tyrosine, and valine...... as nitrogen sources was shown to depend of a functional AreA. AreA was shown to be required for the production of the mycotoxins deoxynivalenol (DON), zearalenone, and fusarielin H regardless of the nutrient medium. Deletion of nmr, the repressor of AreA under nitrogen sufficient conditions, had little effect...

Identification of profitable areas to apply product configuration systems in Engineering-To-Order companies

DEFF Research Database (Denmark)

Kristjansdottir, Katrin; Hvam, Lars; Shafiee, Sara

2015-01-01

This article suggests a systematic framework for identifying potential areas, where Engineering-To-Order (ETO) companies may increase their profit-ability by implementing a Product Configuration System (PCS). In order to do so a three-step framework is proposed based on literature. The starting...... point is to conduct a profitability analysis to determine the accuracy of the cost estima-tions, and based on that the reason for the deviations across different projects is found. The next step is to generate the scope for different scenarios that aim to improve the current situation. Finally...

Effect of surface area of substrates aiming the optimization of carbon nanotube production from ferrocene

International Nuclear Information System (INIS)

Osorio, A.G.; Bergmann, C.P.

2013-01-01

Highlights: ► An optimized synthesis of CNTs by ferrocene is proposed. ► The surface area of substrates influences the nucleation of CNTs. ► The higher the surface area of substrates the lower the temperature of synthesis. ► Chemical composition of substrates has no influence on the growth of CNTs. - Abstract: Ferrocene is widely used for the synthesis of carbon nanotubes due to its ability to act as catalyst and precursor of the synthesis. This paper proposes an optimization of the synthesis of carbon nanotubes from ferrocene, using a substrate with high surface area for their nucleation. Four different surface areas of silica powder were tested: 0.5, 50, 200 and 300 m 2 /g. Raman spectroscopy and microscopy were used to characterize the product obtained and X-ray diffraction and thermal analysis were also performed to evaluate the phases of the material. It was observed that the silica powder with the highest surface area allowed the synthesis of carbon nanotubes to occur at a lower temperature (600 °C), whereas substrates with a surface area lower than 50 m 2 /g will only form carbon nanotubes at temperatures higher than 750 °C. In order to evaluate the influence of chemical composition of the substrate, three different ceramic powders were analyzed: alumina, silica and zirconia. carbon black and previously synthesized carbon nanotubes were also used as substrate for the synthesis and the results showed that the chemical composition of the substrate does not play a relevant role in the synthesis of carbon nanotubes, only the surface area showed an influence.

Product kerma in the air-area and radiation dose in dental radiodiagnosis; Produto kerma ar-area e dose efetiva em radiodiagnostico odontologico

Energy Technology Data Exchange (ETDEWEB)

Costa, Alessandro Martins da, E-mail: amcosta@usp.br [Universidade de Sao Paulo (USP), Ribeirao Preto, SP (Brazil). Faculdade de Filosofia, Ciencias e Letras. Dept. de Fisica

2014-07-01

The main purpose of patient dosimetry in diagnostic radiology is to determine dosimetric quantities for the establishment and use of reference levels and comparative risk assessment. In recent publications the use of the air kerma-area product, PKA, has been suggested in dental radiology, as this quantity is more closely related to risk. The aim of this study was to perform a preliminary survey of PKA and effective dose in different types of dental examinations. The future perspective is a large-scale survey for the establishment and use of diagnostic reference levels in dentistry in Brazil. (author)

Productivity and efficiency of economic activity of the Lower Silesia's large area farms in comparison with other large area farms in Poland

Directory of Open Access Journals (Sweden)

Stanisław Minta

2009-01-01

Full Text Available The paper shows economical and financial situation of the agricultural companies which have most of the grounds in lease. Analysed objects were settled on Lower Silesia (the province in the south – west Poland. The main part of the results of research was about productivity and efficiency of economic resources in these objects. The research was made in years 2000-2002. The results of research in analyzed Lower Silesia’s companies were compared with the best Polish large area farms in order of law and organisation forms: leased farms, private farms and partnerships of Polish public agency AWRSP.

Laser deposition of coatings for aeronautical and industrials turbine blades

Energy Technology Data Exchange (ETDEWEB)

Teleginski, V. [Instituto Federal de Sao Paulo (IFSP), SP (Brazil); Silva, S.A.; Riva, R.; Vasconcelos, G. [Instituto de Estudos Avancados (IEAv), Sao Jose dos Campos, SP (Brazil); Silva Pita, G.R. [Universidade Braz Cubas, Mogi das Cruzes, SP (Brazil); Yamin, L.S. [Escola Tecnica Everardo Passos (ETEP), Sao Jose dos Campos, DP (Brazil)

2016-07-01

Full text: Zirconium-based ceramic materials are widely employed as Thermal Barrier Coatings (TBC), due to its excellent wear and corrosion resistance at high temperatures. The application of TBC includes aeronautical and industrials turbine blades. The working conditions include oxidizing environments and temperatures above 1000°C. The zirconium-based ceramics are developed in such a way that the microstructural control is possible through the control of chemical composition, fabrication route and, thermal treatment. The present paper proposes a laser route to deposit the TBC coating, where the microstructural control is a function of power density and interaction time between the laser beam and the material. The main objective of this work is to study the influence of the CO2 laser beam (Synrad Evolution 125) parameters: power density and interaction time, on the deposition process of yttria-stabilized zirconia (YSZ) powders on NiCrAlY/AISI 316L substrates. The resulting coating surface and interface were characterized by scanning electron microscopy, energy dispersive spectroscopy and X-ray diffraction. The results indicate that is possible to match laser parameters of scanning speed and intensity to produce homogenous coatings. The X-Ray analyses show that the obtained ceramic coating has reduced number of phases, with prevalence of tetragonal phase.(author)

Sustainability of agricultural production in communal areas of ...

African Journals Online (AJOL)

Access to financial support was limited due to lack of collateral and high production risk where farmers' production is solely based on natural and unreliable rainfall patterns and therefore unsustainable. Strategies to improve food security should receive priority to support sustainable resource management, increase access ...

Petrophysical studies in heavy oil sands with early water production - Hamaca area, Orinoco Oil Belt

Energy Technology Data Exchange (ETDEWEB)

Salisch, H.A.

1982-07-01

This study describes the main lines of petrophysical research in the Hamaca-Pao region of the Orinoco Oil Belt. The techniques and parameters most appropriate for petrophysical studies in the area of interest are discussed. Field tests have confirmed the conclusions of this study on early water production and low oil recovery. Steam injection was shown to be a means for increasing oil mobility to such a degree that significant amounts of additional oil can be produced.