Electronic processing of informed consents in a global pharmaceutical company environment.

Science.gov (United States)

Vishnyakova, Dina; Gobeill, Julien; Oezdemir-Zaech, Fatma; Kreim, Olivier; Vachon, Therese; Clade, Thierry; Haenning, Xavier; Mikhailov, Dmitri; Ruch, Patrick

2014-01-01

We present an electronic capture tool to process informed consents, which are mandatory recorded when running a clinical trial. This tool aims at the extraction of information expressing the duration of the consent given by the patient to authorize the exploitation of biomarker-related information collected during clinical trials. The system integrates a language detection module (LDM) to route a document into the appropriate information extraction module (IEM). The IEM is based on language-specific sets of linguistic rules for the identification of relevant textual facts. The achieved accuracy of both the LDM and IEM is 99%. The architecture of the system is described in detail.

THE EFFECTIVENESS OF COLLABORATION INTER-COMPANIES: EXPERIENCES OF LOGISTIC PROCESSES IN THE INDUSTRIES OF THE ELECTRONIC VALLEY OF MINAS GERAIS – BRAZIL

Directory of Open Access Journals (Sweden)

Osmar Vieira de Souza Filho

2013-06-01

Full Text Available The aim of this study was to evaluate aspects of logistics management in companies in a cluster, with interest in the analysis of logistics strategies based in integration and collaboration amongst the companies of the cluster. It was found that the logistics strategies are individual and companies do not search for alignment in their strategies. Thus, they fail to exploit the potential synergies arising from geographic proximity and similarity of operational processes. This attitude helps to inhibit the formation of partnerships, associations and cooperation between the companies, which could be an adequate strategy to overcome the weaknesses and deficiencies of small and medium enterprises acting individually.

Improving the Product Documentation Process of a Small Software Company

Science.gov (United States)

Valtanen, Anu; Ahonen, Jarmo J.; Savolainen, Paula

Documentation is an important part of the software process, even though it is often neglected in software companies. The eternal question is how much documentation is enough. In this article, we present a practical implementation of lightweight product documentation process resulting from SPI efforts in a small company. Small companies’ financial and human resources are often limited. The documentation process described here, offers a template for creating adequate documentation consuming minimal amount of resources. The key element of the documentation process is an open source web-based bugtracking system that was customized to be used as a documentation tool. The use of the tool enables iterative and well structured documentation. The solution best serves the needs of a small company with off-the-shelf software products and striving for SPI.

Business Alliances between Japanese and Taiwanese Companies

OpenAIRE

シンポ, ヒロヒコ; Hirohiko, Shimpo

2012-01-01

In the beginning of the 21^st century, the Information and Communication Technology (ICT) revolution is steadily progressing to build a new social infrastructure. In this process, Taiwanese companies are becoming increasingly significant. This paper illuminates the entire image of Taiwanese companies centering on the electronics industry. Although there is little research on Taiwanese companies, there is still less on their financial condition and their corporate governance. This paper aims t...

Analysis of the Internationalization Process of a Venezuelan Company

Directory of Open Access Journals (Sweden)

Rosângela Sarmento da Silva

2013-04-01

Full Text Available This paper aimed to analyze, under the perspectives of economic and organizational behavior theories, the case of the internationalization of Agrogilca, a Venezuelan company classified as an small and medium business, which operates in the mining segment, agricultural materials and building materials. This is an instrumental case study, which had as sources of evidence the examination of documents provided directly by company’s directors and interviews with its owner and employees. For the data analysis and interpretation, it was took the procedure of adaptation to the theory, since the data obtained empirically were contrasted to elements of already consolidated theories about internationalization of companies. It is concluded that the strategy adopted by Agrogilca company is very close to Theory of Market Power proposed by Hymer, in which companies tend to intensify its position abroad and expand their operations. Its internationalization process did not occur according to the Uppsala model, in which the gradualism of relationship matches the gradualism of internationalization processes, but only with exportations that make companies intensify its position abroad, and finally, shows proximity to the internationalization strategy of Multidomestic Theory of Hoskisson. This is because this theory considers as an internationalization cause the sectoral conditions, political structures and customer needs for a greater administrative performance and competitiveness of the company.

An empirical analysis of strategy implementation process and performance of construction companies

Science.gov (United States)

Zaidi, F. I.; Zawawi, E. M. A.; Nordin, R. M.; Ahnuar, E. M.

2018-02-01

Strategy implementation is known as action stage where it is to be considered as the most difficult stage in strategic planning. Strategy implementation can influence the whole texture of a company including its performance. The aim of this research is to provide the empirical relationship between strategy implementation process and performance of construction companies. This research establishes the strategy implementation process and how it influences the performance of construction companies. This research used quantitative method approached via questionnaire survey. Respondents were G7 construction companies in Klang Valley, Selangor. Pearson correlation analysis indicate a strong positive relationship between strategy implementation process and construction companies’ performance. The most importance part of strategy implementation process is to provide sufficient training for employees which directly influence the construction companies’ profit growth and employees’ growth. This research results will benefit top management in the construction companies to conduct strategy implementation in their companies. This research may not reflect the whole construction industry in Malaysia. Future research may be resumed to small and medium grades contractors and perhaps in other areas in Malaysia.

Bug tracking and project management system application in an electronic design company

Directory of Open Access Journals (Sweden)

Sadık ARSLAN

2016-05-01

Full Text Available In this study, commercially available Bug Tracking and Management Information Systems has been investigated in a comprehensive manner. The systems that commonly used described in detail. Bug Tracking and Project Management Systems requirements analysis of medium-sized companies and Kentkart Ege Electronic which is an Information Technology company has been made. Obtained by the analysis requirements, the appropriate tools are selected for system application. JIRA that a product of Atlassian company was determined as a Bug Tracking and Project Management application tool. In this study, JIRA system adapted to the requirements, Bug Tracking and Project Management systems is designed in a structure which can be easily used by R&D employees. Cost-Benefit analysis is done and using this project was determined to be quite useful.

Restructuring of SE, Plc - from a functionally managed company to a process managed commercial-production company

International Nuclear Information System (INIS)

Ravasz, V.

2004-01-01

The purpose of this presentation is to inform the participants about present changes currently occurred within Slovenske elektrarne, a. s. (SE, Plc). Changes are related to the liberalisation of the electricity market and expected accession of Slovakia to EU. To support its competitiveness, the SE, Plc became a customer-oriented company, prepared to the access of strategic investor. The paper includes the basic information about centralisation and project of Restructuring of SE, Plc., which has started in December 2003. The aim of Restructuring is the change from functionally managed company to a process managed commercial-production company

Problems in the strategy implementation process in croatian companies

Directory of Open Access Journals (Sweden)

Tomislav Radoš

2011-07-01

Full Text Available This paper provides an analysis of the problems in the strategy implementation process in Croatian companies based on the research conducted in Croatian companies in the years 2004, 2005 and 2006. Research results show that problems in the strategy implementation process occur with equal intensity, regardless of the company’s characteristics (size, age and life cycle of the industry. The key problems in the implementation process are: poor communication (information exchange between employees and organizational units responsible for the strategy implementation process, non-adjustment of organizational structure to suit the defined strategy, lack of clear definition of key tasks and activities of all participants in the implementation process, inadequate information system of control over the process of strategy implementation, lack of clearly defined operational plans and directions for strategy implementation, and lack of clearly defined responsibilities and authorities of key employees.

Hybrid performance measurement of a business process outsourcing - A Malaysian company perspective

Science.gov (United States)

Oluyinka, Oludapo Samson; Tamyez, Puteri Fadzline; Kie, Cheng Jack; Freida, Ayodele Ozavize

2017-05-01

It's no longer new that customer perceived value for product and services are now greatly influenced by its psychological and social advantages. In order to meet up with the increasing operational cost, response time, quality and innovative capabilities many companies turned their fixed operational cost to a variable cost through outsourcing. Hence, the researcher explored different underlying outsourcing theories and infer that these theories are essential to performance improvement. In this study, the researcher evaluates the performance of a business process outsource company by a combination of lean and agile method. To test the hypotheses, we analyze different variability that a business process company faces, how lean and agile have been used in other industry to address such variability and discuss the result using a predictive multiple regression analysis on data collected from companies in Malaysia. The findings from this study revealed that while each method has its own advantage, a business process outsource company could achieve more (up to 87%) increase in performance level by developing a strategy which focuses on a perfect mixture of lean and agile improvement methods. Secondly, this study shows that performance indicator could be better evaluated with non-metrics variables of the agile method. Thirdly, this study also shows that business process outsourcing company could perform better when they concentrate more on strengthening internal process integration of employees.

Management of the Technological Innovation Process in Software Companies from Sinaloa, Mexico

Directory of Open Access Journals (Sweden)

Alejandra MIRANDA FELIX

2016-06-01

Full Text Available The objective of this paper is to explain the management process of technological innovation within certified software companies from Sinaloa, considering their strategic technology plan, innovative processes, and intellectual capital. This work is based on the study of 9 software companies located in Sinaloa and certified through the CMMI (Capability Maturity Model for Integration process. Their problems are grouped into three areas: 1 strategic technology plan, 2 innovation and 3 intellectual capital. We propose a model of innovation management to explain and evaluate the integration of those three areas applying a mixed methodology, theoretical foundations, and the analysis of the results. The overall results reveal that the certified software companies from Sinaloa manage innovation informally, through an internal, costly and independent innovation process without considering alliances with other companies, educational institutions, government agencies, technology parks or research and development centers.

Proposal of a Modelling of the Innovation Process in an International Manufacturing Company

Directory of Open Access Journals (Sweden)

Pauline Lacom

2017-07-01

Full Text Available Nowadays, to cope with the competition, and to ensure the durability of their activities, companies have to be able to innovate. Manufacturing companies operating in a B2B market often perceive innovation as a technological result. However, innovation is often more characterized as a process. The needs of the users, and not only the technology, can achieve innovation. In this context, our paper intends to determine how to involve better the users in the innovation process of an international manufacturing company, which is, according to us, representative of the current manufacturing companies. The aim of our research paper is to help manufacturing companies to manage innovation led by users, and to implement their innovation process so that they will be able to set up specific tools for each action of the process. The study proposes a diagram-based language Structured Analysis and Design Technique (SADT that is based on the normative guide FD X50-271 of the French national organization for standardization (AFNOR. The SADT model we propose usefully complements this guide, to make the innovation process more understandable, practical and operational, for manufacturing companies, which are often helpless when faced with the subject. A critical analysis of the model we propose completed in a manufacturing company through semi-structured interviews of the innovation team and questionnaire for all the employees shows the application of the model in the company.

Inventory of electronic money as method of its control: process approach

Directory of Open Access Journals (Sweden)

A.Р. Semenets

2016-09-01

Full Text Available The extent of legal regulation of inventory of electronic money in the company is considered. The absence of developed techniques of valuation as well as reflection of electronic money on the accounts, which results in distortion of indicators of financial statements are detected. The author develops the organizational and methodical provisions of inventory of electronic money in accordance with the stages that will ensure the avoidance of misstatements in the financial statements and providing users with more reliable information about the amount and as well as oddments of electronic money at the company on the balance sheet date. The effect of accounting policies, provisions for the organization of accounting as well as job description on the control system for transactions with electronic money, including their inventory, are determined. The author discovers the typical violations that occur during reflecting the transactions with electronic money in accounting, early detection of which will enable appropriate adjustments for the avoidance of misstatements of the information provided in the financial statements of the company.

Electron-attachment processes

International Nuclear Information System (INIS)

Christophorou, L.G.; McCorkle, D.L.; Christodoulides, A.A.

1982-01-01

Topics covered include: (1) modes of production of negative ions, (2) techniques for the study of electron attachment processes, (3) dissociative electron attachment to ground-state molecules, (4) dissociative electron attachment to hot molecules (effects of temperature on dissociative electron attachment), (5) molecular parent negative ions, and (6) negative ions formed by ion-pair processes and by collisions of molecules with ground state and Rydberg atoms

Business Strategy Formulation By Shareholders and Company Management using The Analytical Network Process (ANPBusiness Strategy Formulation by Shareholders and Company Management Using Analytical Network Process (ANP

Directory of Open Access Journals (Sweden)

Faizal Faizal

2016-11-01

Full Text Available This research aimed to identify the business strategy formulation by the shareholders and the management of the company. Ten companies were selected to be the objects of this research. Those companies were the information technology, telecommunication, printing, mining, construction and chemical companies in Indonesia. The research was conducted by using the Analytical Network Process (ANP and considering the chosen respondents as the decision makers (experts of those companies. The respondents were chosen by using the non-probabilitty sampling method. The result shows that the roles of the company managements are considered m ore influental (0,57143 than the roles of the shareholders (0,28571. From the output of stakeholder’s condition, the best-stratified priority strategies are differentiation (0,600515, cost of leadership (0,230754 and focus (0,168731.

Perceived value creation process: focus on the company offer

Directory of Open Access Journals (Sweden)

Irena Pandža Bajs

2012-12-01

Full Text Available In the competitive business environment, as the number of rational consumers faced with many choices increases, companies can achieve their dominance best by applying the business concepts oriented to consumers in order to deliver a value which is different and better than that of their competitors. Among the various products on the market, an educated consumer chooses the offer that provides the greatest value for him/her. Therefore, it is essential for each company to determine how consumers perceive the value of its offer, and which factors determine the high level of perceived value for current and potential consumers. An analysis of these factors provides guidance on how to improve the existing offer and what the offer to be delivered in the future should be like. That could increase the perceived value of the company offer and result in a positive impact on consumer satisfaction and on establishing a stronger, longterm relationship with consumers. The process of defining the perceived value of a particular market offer is affected by the factors of the respective company’s offer as well as by competition factors, consumer factors and buying process factors. The aim of this paper is to analyze the relevant knowledge about the process of creating the perceived value of the company’s market offer and the factors that influence this process. The paper presents a conceptual model of the perceived value creation process in consumers’ mind.

The improvement of the manufacturing process of a company by the Sigma level: the case of the company BAG (Batna

Directory of Open Access Journals (Sweden)

Athmane MECHENENE

2014-06-01

Full Text Available This modest work aims to evaluate the performance of the manufacturing process of the company by a new measurement tool, namely the sigma level whose purpose is to quantify the costs inherent in each production process, measure the levels of six Sigma in adjacent processes, to achieve weight calculate DPMO (Defects Per Million Opportunity and thus assess the overall competitiveness of the company. This new tool for measuring the performance of the manufacturing process (sigma level is applied to manufacturing gas cylinders (BAG - Batna.

Status of electron beam processing technology in Malaysia

International Nuclear Information System (INIS)

Ghazali, Zulkafli; Dahlan, Khairul Zaman; Aiasah, S.H.; Khomsaton, A.B.; Ting, T.M.

2003-01-01

The electron beam processing in Malaysia starting in 1991 at MINT (Malaysian Institute for Nuclear Technology Research) has been focussed on medical product sterilization, curing of surface coating and polymer modifications. Subsequent installation of accelerators by private companies promoted the development of radiation processing technologies for the use of production of heat-shrinkable products, pilot-scale flue gas purification, as well as wires, cables, tubes and hydrogels. Decomposition of a wide range of volatile organic compounds from industrial exhausts (car painting lines, volatile dioxin and furan from municipal waste incinerators) and purification of liquid wastewater and drinking water are also being under R and D work. Malaysia will continue to play an active part in the program on radiation technology to strengthen environmentally sustainable development in line with FNCA objectives. (S. Ohno)

Electron beam silicon purification

Energy Technology Data Exchange (ETDEWEB)

Kravtsov, Anatoly [SIA ' ' KEPP EU' ' , Riga (Latvia); Kravtsov, Alexey [' ' KEPP-service' ' Ltd., Moscow (Russian Federation)

2014-11-15

Purification of heavily doped electronic grade silicon by evaporation of N-type impurities with electron beam heating was investigated in process with a batch weight up to 50 kilos. Effective temperature of the melt, an indicative parameter suitable for purification process characterization was calculated and appeared to be stable for different load weight processes. Purified material was successfully approbated in standard CZ processes of three different companies. Each company used its standard process and obtained CZ monocrystals applicable for photovoltaic application. These facts enable process to be successfully scaled up to commercial volumes (150-300 kg) and yield solar grade silicon. (copyright 2014 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

SAFER - Company Snapshot

Data.gov (United States)

Department of Transportation — The Company Snapshot is a concise electronic record of company identification, size, commodity information, and safety record, including the safety rating (if any),...

System Documentation AS Basis For Company Business Process Improvement

OpenAIRE

Pelawi, Dewan

2012-01-01

Business process is an activity performed together to achieve business goals. Good business process will support the achievement of the organization’s plan to make profit for the company. In order to understand the business process, the business process needs to be documented and analyzed. The purpose of research is to make the system documentation as a basis to improve or complete the ongoing business process. The research method is system documentation. System documentation is a way to desc...

Processing companies' preferences for attributes of beef in Switzerland.

Science.gov (United States)

Boesch, Irene

2014-01-01

The aim of this work was to assess processing companies' preferences for attributes of Swiss beef. To this end, qualitative interviews were used to derive product attributes that determine the buying decision. Through an adaptive-choice based conjoint analysis survey and latent class analysis of choice data, we compute class preferences. Results show that there are two distinct classes. A smaller class emphasizes traceability back to the birth farm and low producer price, a larger class focuses on environmental effects and origin. Additionally we see that larger companies are more price-sensitive and smaller companies are more sensitive to origin of the animals. The results outlined in this paper may be used to target market segments and to derive differentiation strategies based on product characteristics. Copyright © 2013 Elsevier Ltd. All rights reserved.

QUALITY IMPROVEMENT USING STATISTICAL PROCESS CONTROL TOOLS IN GLASS BOTTLES MANUFACTURING COMPANY

Directory of Open Access Journals (Sweden)

Yonatan Mengesha Awaj

2013-03-01

Full Text Available In order to survive in a competitive market, improving quality and productivity of product or process is a must for any company. This study is about to apply the statistical process control (SPC tools in the production processing line and on final product in order to reduce defects by identifying where the highest waste is occur at and to give suggestion for improvement. The approach used in this study is direct observation, thorough examination of production process lines, brain storming session, fishbone diagram, and information has been collected from potential customers and company's workers through interview and questionnaire, Pareto chart/analysis and control chart (p-chart was constructed. It has been found that the company has many problems; specifically there is high rejection or waste in the production processing line. The highest waste occurs in melting process line which causes loss due to trickle and in the forming process line which causes loss due to defective product rejection. The vital few problems were identified, it was found that the blisters, double seam, stone, pressure failure and overweight are the vital few problems. The principal aim of the study is to create awareness to quality team how to use SPC tools in the problem analysis, especially to train quality team on how to held an effective brainstorming session, and exploit these data in cause-and-effect diagram construction, Pareto analysis and control chart construction. The major causes of non-conformities and root causes of the quality problems were specified, and possible remedies were proposed. Although the company has many constraints to implement all suggestion for improvement within short period of time, the company recognized that the suggestion will provide significant productivity improvement in the long run.

Sales and operations planning : design and implementation of S&OP process in a multinational company

OpenAIRE

Lima, Gonçalo Maria Eva Ferreira Neves

2013-01-01

The company under scrutiny in this thesis is Aker Solutions Process Systems. As a part of the Aker Solutions group, Process Systems is a leading global supplier of processing equipment for oil, water and gas, operating worldwide. The company´s operational objective when implementing this process was to optimize the utilization of resources in it´s five different Business Units. The actions undertaken by the company to develop and implement a Sales and Operations Planning proces...

Polymer electronics

CERN Document Server

Hsin-Fei, Meng

2013-01-01

Polymer semiconductor is the only semiconductor that can be processed in solution. Electronics made by these flexible materials have many advantages such as large-area solution process, low cost, and high performance. Researchers and companies are increasingly dedicating time and money in polymer electronics. This book focuses on the fundamental materials and device physics of polymer electronics. It describes polymer light-emitting diodes, polymer field-effect transistors, organic vertical transistors, polymer solar cells, and many applications based on polymer electronics. The book also disc

Cross-industry innovation processes strategic implications for telecommunication companies

CERN Document Server

Hahn, Tobias

2015-01-01

Based on multiple case study analysis, focusing on scalable service innovation, the present study provides a practical process model that shall serve telecommunication companies as a guideline while conducting strategic cross-industry innovation projects. The findings also pay attention to characteristics in cross-industry collaboration, organizational preconditions and strategic deliberations and postulate propositions for present theoretical innovation process models.

Academic research – a catalyst for the innovation process within companies in Romania

Directory of Open Access Journals (Sweden)

Rodica Pamfilie

2014-08-01

Full Text Available Current economic developments make the use of scientific resources, especially academic research, to be no longer just an option for companies wanting to remain competitive, but a necessity. This statement is based on the research conducted by the authors during the last three years on the companies` performance in Romania regarding the results of the innovation process and capitalization on scientific resources in order to improve this vital process. To achieve this, a mechanism should be created, through which key players in the market - companies, universities, research institutes and government - could work together towards the common goal of economic growth. This mechanism would help companies move beyond incremental innovation by using knowledge generated by universities or research institutes. This can be achieved with the support of the governmental environment, by adopting policies and creating a general favourable climate for research and by fostering its integration among companies. This paper presents an analysis of the degree to which companies in Romania use the results of academic research when developing new products or services. Among the identified issues we include the Romanian companies’ tendency to perform individual research and development projects, though their frequency is quite low given the difficulties in successfully delivering them to the market. The research shows the importance of using academic research when moving beyond incremental improvements and developing the innovation processes within the company. The prospect of a future model of the university as a knowledge and innovation hub of can significantly contribute to the capitalization of academic research by companies in order to develop sustainable businesses.

The level of the usage of the human resource information system and electronic recruitment in Croatian companies

Directory of Open Access Journals (Sweden)

Snježana Pivac

2014-12-01

Full Text Available Performing business according to contemporary requirements influences companies for continuous usage of modern managerial tools, such as a human resource information system (HRIS and electronic recruitment (ER. Human resources have been recognised as curtail resources and the main source of a competitive advantage in creation of successful business performance. In order to attract and select the top employees, companies use quality information software for attracting internal ones, and electronic recruitment for attracting the best possible external candidates. The main aim of this paper is to research the level of the usage of HRIS and ER within medium-size and large Croatian companies. Moreover, the additional aim of this paper is to evaluate the relationship among the usage of these modern managerial tools and the overall success of human resource management within these companies. For the purpose of this paper, primary and secondary research has been conducted in order to reveal the level of the usage of HRIS and ER as well as the overall success of human resource management in Croatian companies. The companies’ classification (HRIS and ER is done by using the non-hierarchical k-means cluster method as well as the nonparametric Kruskal Wallis test. Further, the companies are ranked by the multicriteria PROMETHEE method. Relevant nonparametric tests are used for testing the overall companies’ HRM. Finally, binary logistic regression is estimated, relating binary variable HRM and HRIS development. After detailed research, it can be concluded that large Croatian companies apply HRIS in majority (with a positive relation to HRM performance, but still require certain degrees of its development.

Handling of Environmental Related Requirements : Awareness and Ability to Act at Small and Medium Sized Electric and Electronic Companies

OpenAIRE

Lin, Han-Hsuan

2008-01-01

Environmental related product requirements are increasing worldwide from government authorities, customers and other stakeholders. For small and medium sized companies manufacturing electric and electronic products it is more difficult compared to bigger companies to meet new product related requirements due to smaller budget, resources and knowledge. This research studies the awareness and ability to act upon changes when small and medium sized companies in Sweden face environmental related ...

The features of decision making process in international companies. Are companies in control of their own decisions?

Directory of Open Access Journals (Sweden)

Anastasia JELEVA

2017-06-01

Full Text Available The following article deals with the main causes of irrational decision making process in companies and with respective solutions to make decisions more rational and effective. With the aid of relevant literature, the ways managers, groups and leaders make decisions in reality will be clarified. Besides, the solutions to rational decisions examined through the perspective of managers, leaders and groups. Thus, the background of this article is the question “Are companies in control of their own decisions?” In addition, this paper includes relevant information about the features of decision making process, basic types of decisions, describes the most essential approach in management regarding to decision making and presents the top worst and best business decisions of all time.

THE USE OF THE PROCESS "MANAGEMENT IDEAS" TO ACHIEVE OBJECTIVES OF THE COMPANY

Directory of Open Access Journals (Sweden)

L. B. Likhacheva

2015-01-01

Full Text Available Summary. This article proposes a way of dealing with the eighth type of losses (according to the concept of "Lean production" – loss of employee creativity, and a method of involving all employees in the continuous improvement process of the enterprise. This method is the introduction process «Idea Management» into the management system of the factory. The article describes the sequence of steps in this process, identifies inputs and outputs of the process and the interrelation of the considered process with other processes of the management system of industrial enterprises, and also defines goals of the process. The authors concluded that the presence of "Idea management" process in the management system will help to achieve the strategic goals of the company, as the process is directly correlated with the company's goals. Furthermore the algorithm of action for the effective implementation and further management of the process were suggested in accordance with the Deming cycle including methods that should be applied: goal setting for employees and company (plan; employee engagement and motivation (do ; periodic monitoring of achievement of goals (check; assessment of goal achievement, conducting corrective action (act. The authors show that an important condition for successful implementation and further efficient functioning of the process "Management ideas" is the interest of the top management and its constant attention to the ongoing process of activity. The proposed method is universal for all kinds of enterprises. The proposed method allows for a relatively short time to implement and guide the Idea Management process to achieve strategically important goals of the company.

17 CFR 202.11 - Public Company Accounting Oversight Board budget approval process.

Science.gov (United States)

2010-04-01

... 17 Commodity and Securities Exchanges 2 2010-04-01 2010-04-01 false Public Company Accounting Oversight Board budget approval process. 202.11 Section 202.11 Commodity and Securities Exchanges SECURITIES AND EXCHANGE COMMISSION INFORMAL AND OTHER PROCEDURES § 202.11 Public Company Accounting Oversight...

Using Reporting in the Internal Communication Process of the Company

Directory of Open Access Journals (Sweden)

Cornel Marian Iosif

2013-07-01

Full Text Available Internal communication can be regarded either as a subsistent process of the organization, or as a process helping to decode and more easily understand them. Organizations are based on the internal communication process, because without it, information, ideas could not be sent, the organization’s goals and values could not be built, and its organizational culture would simply not exist. The internal communication process is centered on sending ideas, information in the organization. This is directly proportional with the efficiency of the organization. Internal communication allows for the best decision to be taken, for information to be sent towards the interior of the company, towards the employees, but also has the purpose of strengthening the relations between persons. Internal communication has at its basis the verbal and non-verbal communication, but they have great disadvantages, because: verbal communication has losses of information, depends on the moment of transmission, but also on the receiver.Keywords: report, internal communication, neuro linguistic programming, company

Dimensions of Decision-Making Process Quality and Company Performance: A Study of Top Managers in Slovenia

Directory of Open Access Journals (Sweden)

Grušovnik Damjan

2017-12-01

Full Text Available This paper investigates the relationship between the dimensions of the decisionmaking process quality and company performance of top managers’ in Slovenia. We found out that companies whose managers exhibit an above-average dimension of openness of spirit in the quality of the decision making process, on average, have a higher stance on foreign markets as companies in which managers show a below-average open spirit. For the managers who work in companies that are present in foreign markets, we could confirm that there is a low/weak correlation between the dimension of effort of the decision-making process quality and the number of employees in a company.

Product development practice in medium-sized food processing companies

DEFF Research Database (Denmark)

Harmsen, Hanne

Market orientation has in numerous empirical NPD-studies been identified as critical for success. However, this study reveals a severe gap between the normative implications regarding market orientation and current product development practice in number of Danish food-processing companies. Through...

Increasing a large petrochemical company efficiency by improvement of decision making process

OpenAIRE

Kirin Snežana D.; Nešić Lela G.

2010-01-01

The paper shows the results of a research conducted in a large petrochemical company, in a state under transition, with the aim to "shed light" on the decision making process from the aspect of personal characteristics of the employees, in order to use the results to improve decision making process and increase company efficiency. The research was conducted by a survey, i.e. by filling out a questionnaire specially made for this purpose, in real conditions, during working hours. The sample of...

Internationalization Process of Thai Office Furniture Company in India: A case study of Rockworth Public Company Limited

OpenAIRE

netwong, weeraya; trakarnthai, priyawat

2010-01-01

The purpose of this thesis is to study the internationalization process by investigate how Rockworth Public Company Limited manage internationalization in Indian market efficiently. Additionally, we aim to improve our understanding and knowledge in international business comprehensively.

DESIGN FOCUSED ORIENTATION PROCESSES FOR MANAGING INVESTMENT COMPANIES IN THE FOREIGN EXCHANGE MARKET

Directory of Open Access Journals (Sweden)

Анатолий Аркадьевич АНАТОЛЬЕВ

2015-05-01

Full Text Available This report examines the investment companies operating in the market Forex. Business process analysis showed the design direction of their activities. Dedicated two groups of projects of investment companies can position them as project-oriented organization.

Electron backscattering for process control in electron beam welding

International Nuclear Information System (INIS)

Ardenne, T. von; Panzer, S.

1983-01-01

A number of solutions to the automation of electron beam welding is presented. On the basis of electron backscattering a complex system of process control has been developed. It allows an enlarged imaging of the material's surface, improved adjustment of the beam focusing and definite focus positioning. Furthermore, both manual and automated positioning of the electron beam before and during the welding process has become possible. Monitoring of the welding process for meeting standard welding requirements can be achieved with the aid of a control quantity derived from the results of electronic evaluation of the high-frequency electron backscattering

A strategic analysis of future growth options for an established process control company

OpenAIRE

Levesque, Sheila Lynne

2007-01-01

This project speaks to the prevailing business environment presently encountered at WESTCOAST Controls Ltd (WESTCOAST), a leading process control company in British Columbia, Canada. The scope of the project covers topics such as company overview, external industry analysis, and internal company analysis including strategic tools such as Porter's 5 Forces. The project concludes with a recommendation for the restructuring of the control systems & solutions division for improved performan...

e-Learning Application for Machine Maintenance Process using Iterative Method in XYZ Company

Science.gov (United States)

Nurunisa, Suaidah; Kurniawati, Amelia; Pramuditya Soesanto, Rayinda; Yunan Kurnia Septo Hediyanto, Umar

2016-02-01

XYZ Company is a company based on manufacturing part for airplane, one of the machine that is categorized as key facility in the company is Millac 5H6P. As a key facility, the machines should be assured to work well and in peak condition, therefore, maintenance process is needed periodically. From the data gathering, it is known that there are lack of competency from the maintenance staff to maintain different type of machine which is not assigned by the supervisor, this indicate that knowledge which possessed by maintenance staff are uneven. The purpose of this research is to create knowledge-based e-learning application as a realization from externalization process in knowledge transfer process to maintain the machine. The application feature are adjusted for maintenance purpose using e-learning framework for maintenance process, the content of the application support multimedia for learning purpose. QFD is used in this research to understand the needs from user. The application is built using moodle with iterative method for software development cycle and UML Diagram. The result from this research is e-learning application as sharing knowledge media for maintenance staff in the company. From the test, it is known that the application make maintenance staff easy to understand the competencies.

Investment Cost Model in Business Process Intelligence in Banking And Electricity Company

Directory of Open Access Journals (Sweden)

Arta Moro Sundjaja

2016-06-01

Full Text Available Higher demand from the top management in measuring business process performance causes the incremental implementation of BPM and BI in the enterprise. The problem faced by top managements is how to integrate their data from all system used to support the business and process the data become information that able to support the decision-making processes. Our literature review elaborates several implementations of BPI on companies in Australia and Germany, challenges faced by organizations in developing BPI solution in their organizations and some cost model to calculate the investment of BPI solutions. This paper shows the success in BPI application of banks and assurance companies in German and electricity work in Australia aims to give a vision about the importance of BPI application. Many challenges in BPI application of companies in German and Australia, BPI solution, and data warehouse design development have been discussed to add insight in future BPI development. And the last is an explanation about how to analyze cost associated with BPI solution investment.

How integrating industrial design in the product development process impacts on company performance

NARCIS (Netherlands)

Gemser, G; Leenders, MAAM

There is a growing belief that investing in industrial design is beneficial to company performance. This article sheds more light on how and when integrating industrial design in the product development process can enhance a company's competitive position. The basic premise is that the impact of

A study on the organization and development of the budgetary process in technology companies of Florianópolis

Directory of Open Access Journals (Sweden)

Francielle Koerich Simas

2008-01-01

Full Text Available The budgetary system is an administrative tool that facilitates the activities integration through the planning and control of the organization many areas. This article objectifies to identify the structure and the main methods used for budgets elaboration in the technology companies of Florianópolis. The study was carried through an exploratory, descriptive, bibliographical and quantitative research. The dices were collected by a questionnaire with closed questions directed to a population composed for 24 technology companies of Florianópolis, registered for the Industries Federacy of the State of Santa Catarina - FIESC. It was observed that the majority of the companies do not present the systemize structure of budgetary system, in which are projected all the budgetary parts pertaining to the processes organization. It can also be detached that the main projection method of the considered items for the budgetary parts elaboration is constituted by the historical dices readjustment. It was evidenced that the participation in the budget elaboration decision is formed in its majority for the high administration and that the used technological resources for the budgets development are composed, mainly, for electronic spread sheets.

A Study on the Cost-Effectiveness of a SemiAutomated Cutting Process at a Garment Manufacturing Company

Directory of Open Access Journals (Sweden)

Castro, Mark Daniel

2017-11-01

Full Text Available The subject of the study, Company X, has been experiencing variations in the quantity report from the cutting department and the transmittal reports. The management found that these processes are hugely affected by manual labor. To reduce the system's proneness to human error, the management decided to explore the possibility of adapting a semi-automated spreading and cutting process in the system. This research aims to evaluate the pre-sewing processes of Company X and whether introducing automation can be beneficial to the company and the garments industry. The researchers used process mapping tools, descriptive research, and process flowchart to assess the current and proposed systems, and engineering economics to evaluate the cost and benefits of implementing the semi-automated system. The results showed that with the implementation of the semi- automated system; the company will incur 66.61% more savings per year than the current system. In terms of cycle time, the semi-automated system eliminated the relaxation of fabric before the cutting process, thereby greatly reducing cycle time. In addition, the researchers found that as long as the company produce more than 4,140 pieces per day for the system will be economically feasible. Unquantifiable benefits are also identified on introducing the semi- automated system to the company. The company can have a cleaner work environment that will lead to more productivity and greater quality of goods. This will lead to a better company image that will encourage more customers to place job orders.

Knowledge Integrated Business Process Management for Third Party Logistics Companies

OpenAIRE

Zhang, Hongyan

2013-01-01

The growing importance of logistics as well as the increasing dynamic complexity of markets, technologies, and customer needs has brought great challenges to logistics. In order to focus on their core competency in such a competitive environment, more and more companies have outsourced a part or the entirety of the logistics process to third party logistics (3PL) service providers. 3PL has played a crucial role in managing logistics processes within supply chain management. Logistics processe...

Process of value co-creation and its impact on innovation strategy in service companies

Directory of Open Access Journals (Sweden)

Antonia Ruiz-Moreno

2014-04-01

Full Text Available Purpose: This article analyzes the factors that influence on the capacity of service firms companies to adapt to changing environment. It analyzes how the critical dimensions of the innovation process influence the gap generated by the difference between the current level of innovation of the company and the level developed by competitors. Design/methodology/approach: Companies were selected from the database Duns and Bradstreet 2000. A sample of companies in Spain in a relatively homogeneous geographic, cultural, legal and political space was chosen. The questionnaire was sent to a total of 200 companies, most of them being large and medium enterprises. Findings and Originality/value: The results show that customer involvement in the innovation process is greater in service firms that have greater innovation gap and are more proactive. Formalization and decentralization present low innovation gap. Limitations: This study is focused on Spanish companies. This work presents the characteristics of a cross-sectional study. Practical implications: In order to better adapt to the environment, firms need to present a greater fit between results on innovation and customer expectations. Therefore, it is very important to accurately detect user needs throughout the innovation process. Originality/value: Our results provide guidance in decisions that are deliberate and which may affect the degree of proactivity of innovation in services. We have advanced in the implications of customer participation in business results. Keywords: Innovation gap, customer participation, decentralization, formalization, service firms.

The Processes of Socialization of Heirs in Familyowned Companies: the challenge of constructing the multigenerational transition

Directory of Open Access Journals (Sweden)

Ana Luiza Albuquerque Cruz

2014-08-01

Full Text Available In the context of a family owned company, the general literature recognizes that the interaction between the family and the company is one of the main constituting and influential dimensions of the dynamics within these organizations in regards to the succession process. The main objective is to analyze the process of socialization between members of a business family and their influence in the dynamic constitution of the succession process. For such, a qualitative approach was adopted based on the technique of case study, conducted in a company in the pharmaceutical and retail sector with more than 100 years of operations in Belo Horizonte. From the interviews conducted with the researched subjects it was possible to observe that the early insertion of the successor-heir in the company dynamics allowed for him to be projected as the guardian of the family values, bearer of externally recognized competencies, depositary of the legacy and responsible for the continuity of the family. All of these capacities have contributed to legitimize the heir-successors in the process of succession of the researched company.

A Case Study on Improving the Process of Desicion Making in Industrial Companies

Directory of Open Access Journals (Sweden)

Valdas Bernatavičius

2011-02-01

Full Text Available The article deals with small and medium-sized industrial enterprises and looks into problems about the process of decision making in order to optimize the cost of enterprises within critical financial times. The article focuses on the theoretical models for decision making and presents the analysis of metal processing company „X“ to disclose multiple factors that have an influence on successful processes of selecting and making decisions. The paper also describes the theoretical decision-making model for optimizing company's costs on the basis of which decision-making processes should be moved to e-environment which may assist in improving the overall decision-making procedures in small enterprises.Article in Lithuanian

Quality politics: an immaterial investment for companies in (micro)electronics

Science.gov (United States)

Bacivarov, I. C.; Lupan, R.; Robledo, C.; Bacivarov, Angelica

2010-11-01

With the globalization of the markets and the growth of competitiveness in the manufacturing sector, quality has become a key factor of success. Quality is particularly important for the companies which activate in the micro(electronics) field. The quality management system holds a vital place in the company's structure. Implementing such a system requires important operating costs. These costs are known as Quality Obtaining Costs (QOC) and may be considered as an investment. Planning an investment, means evaluating its return in order to see if it is profitable or not. Measuring the return of quality politics investment raise some delicate problems. We may calculate some aspects of the return of investment by measuring the shape of non-quality costs. An eventual decrease of these costs could be synonym with a profitable investment. But the advantages of good quality politics cannot be measured only by taking into consideration the non-quality costs (even if they include direct and indirect costs). There are also intangible advantages (like mark image, competences, polyvalence, client's satisfaction...) that derive from quality approaches. How to evaluate this type of consequences / advantages? The idea developed in this article is to considerate the quality politics like un immaterial/intelligent investment. Therefore could it be advantageous / possible to use the immaterial investment's measuring and evaluation techniques for studying the quality politics return of investment?

A New View at the Planning Marketing Popular Products: Exploratory Study Electronics Sector with Companies in Brazil.

OpenAIRE

Evange Elias Assis; Francisco Antonio Serralvo; Karen Perrotta Lopes de Almeida Prado

2015-01-01

The increased consumption of appliance and electronic products by lower-income population represented a growth opportunity for companies in the sector. The overall objective of this paper is to investigate how appliance and electronic product manufacturers draw up their marketing planning for low-end products. An exploratory approach was taken in this study, comprising the literature review and the empirical research which was conducted in two stages by combining the qualitative and quantitat...

Electron accelerators for waste processing

International Nuclear Information System (INIS)

Kon'kov, N.G.

1976-01-01

The documents of the International symposium on radiation vaste processing are presented. Questions on waste utilization with the help of electron accelerators are considered. The electron accelerators are shown to have an advantage over some other ionizing radiation sources. A conclusion is made that radiation methods of waste processing are extensively elaborated in many developed countries. It has been pointed out that an electron accelerator is a most cheap and safe ionizing radiation source primarily for processing of gaseous and liquid wastes

Patterns of order processing : a study of the formalization of the ordering process in order-driven manufacturing companies

NARCIS (Netherlands)

Welker, Geertruida Annigje

2004-01-01

It is essential for many order-driven manufacturing companies to be able to respond quickly to changing customer demand. In this respect, the ordering process plays a central role, as coordination between demand and production takes places within this process. The ordering process must contribute to

Tree-based flood damage modeling of companies: Damage processes and model performance

Science.gov (United States)

Sieg, Tobias; Vogel, Kristin; Merz, Bruno; Kreibich, Heidi

2017-07-01

Reliable flood risk analyses, including the estimation of damage, are an important prerequisite for efficient risk management. However, not much is known about flood damage processes affecting companies. Thus, we conduct a flood damage assessment of companies in Germany with regard to two aspects. First, we identify relevant damage-influencing variables. Second, we assess the prediction performance of the developed damage models with respect to the gain by using an increasing amount of training data and a sector-specific evaluation of the data. Random forests are trained with data from two postevent surveys after flood events occurring in the years 2002 and 2013. For a sector-specific consideration, the data set is split into four subsets corresponding to the manufacturing, commercial, financial, and service sectors. Further, separate models are derived for three different company assets: buildings, equipment, and goods and stock. Calculated variable importance values reveal different variable sets relevant for the damage estimation, indicating significant differences in the damage process for various company sectors and assets. With an increasing number of data used to build the models, prediction errors decrease. Yet the effect is rather small and seems to saturate for a data set size of several hundred observations. In contrast, the prediction improvement achieved by a sector-specific consideration is more distinct, especially for damage to equipment and goods and stock. Consequently, sector-specific data acquisition and a consideration of sector-specific company characteristics in future flood damage assessments is expected to improve the model performance more than a mere increase in data.

Night-shift work and risk of compromised visual acuity among the workers in an electronics manufacturing company.

Science.gov (United States)

Lin, Yu-Cheng; Ho, Kuo-Jung

2018-01-01

To evaluate the association between night-shift work exposure and visual health, this cross-sectional study utilized visual acuity, a surrogate measure for visual function, as a parameter, and performed an analysis comparing visual acuity between daytime and nighttime employees in an electronics manufacturing company. Data of personal histories, occupational records, physical examinations and blood tests was obtained from the electronic health records of workers. The total of 8280 workers including 3098 women and 5182 men, wearing their own daily used eyeglasses, were included in the final analysis. The mean age of the sample population was 34.7 years old (standard deviation = 5.4 years). All workers were divided into 3 work categories - consistent daytime worker (CDW), day-shift worker (DSW) and night-shift worker (NSW). The check-up results of glasses-corrected visual acuity (c-VA) were utilized to classify individuals as good (≥ 1.2, both eyes) and inadequate (electronics manufacturing company. Int J Occup Med Environ Health 2018;31(1):71-79. This work is available in Open Access model and licensed under a CC BY-NC 3.0 PL license.

The process of implementing Competitive Intelligence in a company

Directory of Open Access Journals (Sweden)

František Bartes

2013-01-01

Full Text Available It is a common occurrence in business practice that the management of a company, in an effort to jump-start the function of the Competitive Intelligence unit, makes a number of mistakes and errors. Yet it is not difficult to avoid these missteps and achieve the desired level of Competitive Intelligence activities in a purposeful and effective manner. The author believes that a resolution of this problem lies in his concept of Competitive Intelligence viewed as a system application discipline (like value analysis or value engineering, which is why he approaches the problem of actual implementation of Competitive Intelligence in a company by referring to standards ČSN EN 12 973 and ČSN EN 1325-2. The author then proposes his own procedure for implementing Competitive Intelligence in a company. He first describes the various ways of securing the Competitive Intelligence services. Depending on the manner of securing these services, it is necessary to choose the actual method of bringing Competitive Intelligence into the company. The author goes on to lists the essentials that every program of Competitive Intelligence implementation should have. The process of Competitive Intelligence implementation unfolds in three stages, those being: 1. Managerial preparation for the introduction of Competitive Intelligence. 2. Personnel-oriented and professional preparation for applying Competitive Intelligence. 3. Organizational preparation for the implementation and practice of Competitive Intelligence. In Discussion, the author points out the most common mistakes he encountered in practice when implementing the Competitive Intelligence function.

Integrate Product Planning Process of OKP Companies in the Cloud Manufacturing Environment

OpenAIRE

Zheng , Pai; Xu , Xun; Xie , Sheng ,

2015-01-01

Part 8: Cloud-Based Manufacturing; International audience; In today’s competitive market, OKP companies operate in the “engineer-to-order” business mode, whereby analysing the “voice of customer” promptly and accurately in the early design stage determines the success of product development. However, OKP companies have limited resources. They may not be able to afford the cost of the complicated Quality Function Deployment (QFD) product planning process, nor can they obtain abundant CRs infor...

Technological Capability Upgrading and Entrepreneurship: Case Study of Selected Indonesian Fish Processing Companies

Directory of Open Access Journals (Sweden)

Erman Aminullah

2016-07-01

Full Text Available This study analyzes the technological capability upgrading and entrepreneurship in the Indonesian fish processing industry. The analysis viewed from the Sectoral Innovation System (SIS focuses on two aspects: the enabling factors for innovation, and the role of entrepreneur in technological capability upgrading. The study finds that Indonesian fish processing companies: (i are less interactive with local universities or other STI (science, technology and innovation centers, and innovation was mostly done through learning by DUI (doing, using and interacting; (ii are characterized as low-tech industries with a high standard for food safety and product differentiation; (iii apply adaptive innovation, modified from existing technology or knowledge, except for the leading companies who apply innovation for new products in the market; (iv actors, technology, market trends, and networks are the main enabling factors for innovation; and (v the role of entrepreneurs – especially in building entrepreneurial networks – were dominant in the leading companies. The entrepreneurial networks exist and work in global distribution chains that are widely adopted by companies to export their products through buyer–producer relationships. The pathways toward export markets are: global born directly, fastly learned global, and delay learned global companies. These categories have enriched the Mets category (2012. The policy implications of the findings for government should: (i facilitate companies’ interaction with local universities or other STI centers; and (ii encourage domestic companies to improve their competitiveness by shifting to higher added value products through various innovations and trading policy schemes.

Electron spectroscopy in the fundamental process of electron-nucleus bremsstrahlung

International Nuclear Information System (INIS)

Hillenbrand, Pierre-Michel

2013-07-01

Within the scope of this thesis the fundamental process of electron-nucleus bremsstrahlung was studied in inverse kinematics at the Experimental Storage Ring ESR at GSI. For the system U 88+ + N 2 at 90 MeV/u it was shown, that by using inverse kinematics coincidence measurements between the scattered electron and the emitted photon can be performed for the case, in which the incoming electron transfers almost all of its kinetic energy onto the emitted photon. The sensitivity to the fundamental process could be achieved by measuring triple differential cross sections as a function of the emission angle of the photon and the scattered electron as well as the energy of the scattered electron. The optics of the magnetic electron spectrometer used were thoroughly revised and optimized to the experimental requirements. Analyzing different coincidences in this collision system, it was possible to determine the contributions to the electron distribution arising from radiative electron capture to the projectile continuum, nonradiative electron capture to the projectile continuum, and electron loss to the projectile continuum. The experimental results of each of these processes were compared to theoretical calculations. The electron spectra for the radiative and the nonradiative electron capture to continuum clearly reproduce the opposite asymmetry predicted by theory. Furthermore electron spectra for collisions of U 28+ with different gases were measured.

Introduction to electron beam processing

Energy Technology Data Exchange (ETDEWEB)

Kawakami, Waichiro [Japan Atomic Energy Research Inst., Takasaki, Gunma (Japan). Takasaki Radiation Chemistry Research Establishment

1994-12-31

The contents are general features in the irradiation of polymers, electron beam machines - low energy, medium energy, high energy; application of EB machine in industries, engineering of EB processing, dosimetry of EB (electron beam) safe operation of EB machine, recent topics on EB processing under development. 3 tabs., 4 figs., 17 refs.

Introduction to electron beam processing

International Nuclear Information System (INIS)

Waichiro Kawakami

1994-01-01

The contents are general features in the irradiation of polymers, electron beam machines - low energy, medium energy, high energy; application of EB machine in industries, engineering of EB processing, dosimetry of EB (electron beam) safe operation of EB machine, recent topics on EB processing under development. 3 tabs., 4 figs., 17 refs

Electronic Commerce

Energy Technology Data Exchange (ETDEWEB)

Laird, N. [NRG Information Services Inc., Calgary, AB (Canada)

1995-11-01

The concept of electronic commerce in the gas industry was discussed. It was defined as the integration of communication technology, advanced information processing capability and business standards, to improve effectiveness of the business process. Examples of electronic data interchange from the automotive, airline, and banking industry were given. The objective of using this technology in the gas industry was described as the provision of one electronic facility to make seamless contractual and operational arrangements for moving natural gas across participating pipelines. The benefit of seamless integration - one readily available standard system used by several companies - was highlighted. A list of value-added services such as the free movement of bulletins, directories, nominations,and other documents was provided.

METHOD OF ELECTRON BEAM PROCESSING

DEFF Research Database (Denmark)

2003-01-01

As a rule, electron beam welding takes place in a vacuum. However, this means that the workpieces in question have to be placed in a vacuum chamber and have to be removed therefrom after welding. This is time−consuming and a serious limitation of a process the greatest advantage of which is the o......As a rule, electron beam welding takes place in a vacuum. However, this means that the workpieces in question have to be placed in a vacuum chamber and have to be removed therefrom after welding. This is time−consuming and a serious limitation of a process the greatest advantage of which...... is the option of welding workpieces of large thicknesses. Therefore the idea is to guide the electron beam (2) to the workpiece via a hollow wire, said wire thereby acting as a prolongation of the vacuum chamber (4) down to workpiece. Thus, a workpiece need not be placed inside the vacuum chamber, thereby...... exploiting the potential of electron beam processing to a greater degree than previously possible, for example by means of electron beam welding...

Innovation in Enterprises in Process of Merge: a study of services and industry companies

Directory of Open Access Journals (Sweden)

Patricia Gonçalves Vidal

2014-08-01

Full Text Available The current article presents the innovation process in companies which have adopted as strategy the value creation and synergies through merger with other companies. From a theoretical foundation it aims to shed light on the theme by presenting basis to this research and the ensuing result analysis. Thus were analyzed companies from two diverse sectors of the Economy with the endeavor to prove “how” and “why” such innovation before the merger process happened and which the possible results from this analysis are. By using secondary sources, with the goal to present real and instant results of the innovation announcements of the studied enterprises, through cases and event studies, it is concluded that innovation in products and in partnerships create higher value than other sorts of innovation in short term and in the post-merger.

Optimization of Business processes in Airport Services Company in Macedonia using the TQM Philosophy

Directory of Open Access Journals (Sweden)

Elizabeta Mitreva

2016-11-01

Full Text Available This study is to show a full diagnostic to some of the business processes in the company for airport services in Macedonia was made. The methodology of TQM (Total Quality Management system was applied in the company, especially in the sector for de-icing and protection against frost on aircrafts. With the implementation of this system, an optimal solution was found for uninterrupted operation in the airport traffic. In this way there was a change in the company paradigm – do not work hard but smart, with a constant improvement of processes, while taking into account the needs and desires of customers and profit. This research shows that other methods and techniques were applied such as Pareto Diagram, Ishikawa approach, Checklist, Map of trends, all in order to identify problems and find an optimal solution.

Electron beam processing of polymers

International Nuclear Information System (INIS)

Silva, Leonardo G. Andrade e; Dias, Djalma B.; Calvo, Wilson A.P.; Miranda, Leila F. de

2011-01-01

The aim of this work is the use of electron beam produced by industrial electron accelerators to process polymers. There are several applications, such as, irradiation of wires and electric cables for automotive, aerospace, household appliance, naval and computing industries. The effect of different radiation doses in low density polyethylene (LDPE) was also studied. After irradiation and crosslinking it was thermally expanded forming LDPE foam. In addition, poly(N-vinyl-2-pyrrolidone) (PVP) hydrogels using electron beam processing were prepared. In all cases studied crosslinking percentages of the samples were determined. (author)

Risk management for companies focused on innovation processes

Directory of Open Access Journals (Sweden)

Ana Paula Beck da Silva Etges

Full Text Available Abstract Risk is inherent to the activities of technology and innovation companies and to manage them represent an opportunity to improve the company capability to achieve its goals. The use of ERM models has been studied since the Committee of Sponsoring Organizations of the Treadway Commission guides. This article adapted the MIGGRI model for the context of an innovation company from a TSP in Brazil. Using a case study and a review from previous ERM literature, the article show that is possible to measure the risks that an innovation company faces, and that they may be managed with a view to supporting a company’s strategy. Were applied an economic analysis based on a MCS and an indicator of CFaR were applied to measure innovation risks. A strategic performance model for innovation companies are proposed and the benefit to implement Risk Management practices in innovation organizations was validated.

Electronic repository and standardization of processes and electronic documents in transport

Directory of Open Access Journals (Sweden)

Tomasz DĘBICKI

2007-01-01

Full Text Available The article refers to the idea of the use of electronic repository to store standardised scheme of processes between a Logistics Service Provider and its business partners. Application of repository for automatic or semi-automatic configuration of interoperability in electronic data interchange between information systems of differentcompanies based on transport (road, rail, sea and combined related processes. Standardisation includes processes, scheme of cooperation and related to them, electronic messages.

IMPLEMENTATION OF QUALITATIVE RULES IN COMPANY`S INFORMATION MANAGEMENT

Directory of Open Access Journals (Sweden)

Anna WOLNOWSKA

2012-07-01

Full Text Available In the article there were presented chosen issues of quality management. Important role of information and work processes in companies were emphasized . Based on eight rules of quality management, TQM standards and ideas of discipline pioneers like Deming, Juran, Crosby and Shewart, author has constructed way of using chosen rules and assumptions to company`s information circulation. Analogy, suggested by author, has not only emphasized importance of information as a company`s resource, but also has pointed to possibility of improving ways of managing this information.

THE RELATIONSHIP OF COMPANY PERFORMANCE WITH EXTERNAL STAKEHOLDER SATISFACTION (STUDY AT INDUSTRIAL METAL PROCESSING COMPANY IN SULAWESI)

OpenAIRE

Amar, Muh Yunus

2011-01-01

Attainment of company performance relates to participation of its external stakeholder. External stakeholder here defined as the group which having importance with company and cannot be controlled by company management. Existence of external stakeholder becomes of vital importance and influential to performance and continuity of company life (Kasali, 1990). Therefore, management of the company needs to paying attention more to the importance of the external stakeholder. External stakeholders ...

What Do Companies in the Processing Industry do in Order to Achieve Success?

Directory of Open Access Journals (Sweden)

Peter BONA

2015-04-01

Full Text Available Borders of countries and continents have become more and more blurred by now, while distances have turned out to be less important. Markets of continents or countries are not separated anymore therefore competition between companies has gotten fiercer and much faster than earlier. What kind of instruments may companies in the processing industry use to maintain their existence and to remain competitive in the fragile system following the economic crisis in 2008? This research aims at finding out how the effects of components belonging to the concept of strategic management system influence outstanding achievement and success. It primarily analyses, in what ways instruments considered being the most determinative, i.e. strategic a structural success factors affect the processing industry. In order to do that the research defines the factors having an influence. Thereafter it explains successful operation of companies with factors emerging via the use of regression models. It uses the balance scorecard as a tool for success criteria describing success. The research tackles the issue of sustainability with a high priority in this system as a success component: the fifth perspective among the other four classic ones. Thus the results of the research will show how strategic and structural success factors can make a company successful and the satisfaction of which groups of interest they affect the most.

Exchange Rate Exposure Management: The Benchmarking Process of Industrial Companies

DEFF Research Database (Denmark)

Aabo, Tom

. The conducted interviews show that empirical reasons behind actual hedging strategies vary considerably - some in accordance with mainstream finance theory, some resting on asymmetric information. The diversity of attitudes seems to be partly a result of different competitive environments, partly a result...... of practices and strategies that have been established in each company fairly independently over time. The paper argues that hedge benchmarks are useful in their creation process (by forcing a comprehensive analysis) as well as in their final status (by the establishment of a consistent hedging strategy......Based on a cross-case study of Danish industrial companies the paper analyzes the benchmarking of the optimal hedging strategy. A stock market approach is pursued but a serious question mark is put on the validity of the obtained information seen from a corporate value-adding point of view...

Food safety management systems performance in African food processing companies: a review of deficiencies and possible improvement strategies.

Science.gov (United States)

Kussaga, Jamal B; Jacxsens, Liesbeth; Tiisekwa, Bendantunguka Pm; Luning, Pieternel A

2014-08-01

This study seeks to provide insight into current deficiencies in food safety management systems (FSMS) in African food-processing companies and to identify possible strategies for improvement so as to contribute to African countries' efforts to provide safe food to both local and international markets. This study found that most African food products had high microbiological and chemical contamination levels exceeding the set (legal) limits. Relative to industrialized countries, the study identified various deficiencies at government, sector/branch, retail and company levels which affect performance of FSMS in Africa. For instance, very few companies (except exporting and large companies) have implemented HACCP and ISO 22000:2005. Various measures were proposed to be taken at government (e.g. construction of risk-based legislative frameworks, strengthening of food safety authorities, recommend use of ISO 22000:2005, and consumers' food safety training), branch/sector (e.g. sector-specific guidelines and third-party certification), retail (develop stringent certification standards and impose product specifications) and company levels (improving hygiene, strict raw material control, production process efficacy, and enhancing monitoring systems, assurance activities and supportive administrative structures). By working on those four levels, FSMS of African food-processing companies could be better designed and tailored towards their production processes and specific needs to ensure food safety. © 2014 Society of Chemical Industry.

Shimmed electron beam welding process

Science.gov (United States)

Feng, Ganjiang; Nowak, Daniel Anthony; Murphy, John Thomas

2002-01-01

A modified electron beam welding process effects welding of joints between superalloy materials by inserting a weldable shim in the joint and heating the superalloy materials with an electron beam. The process insures a full penetration of joints with a consistent percentage of filler material and thereby improves fatigue life of the joint by three to four times as compared with the prior art. The process also allows variable shim thickness and joint fit-up gaps to provide increased flexibility for manufacturing when joining complex airfoil structures and the like.

MEASUREMENT PROCESS OF SOFTWARE DEVELOPMENT PROJECTS FOR SUPPORTING STRATEGIC BUSINESS OBJECTIVES IN SOFTWARE DEVELOPING COMPANIES

Directory of Open Access Journals (Sweden)

Sandra Lais Pedroso

2013-08-01

Full Text Available Software developing companies work in a competitive market and are often challenged to make business decisions with impact on competitiveness. Models accessing maturity for software development processes quality, such as CMMI and MPS-BR, comprise process measurements systems (PMS. However, these models are not necessarily suitable to support business decisions, neither to achieve strategic goals. The objective of this work is to analyze how the PMS of software development projects could support business strategies for software developing companies. Results taken from this work show that PMS results from maturity models for software processes can be suited to help evaluating operating capabilities and supporting strategic business decisions.

Employee's satisfaction with integration process as a key to success of the company. Case: Radisson Blu hotel Latvija.

OpenAIRE

Cipruse, Dagnija

2011-01-01

The purpose of this thesis is to clarify how the employee’s satisfaction with integration process can make impact on the success of the company. As employees are the most important resources of the company, good care have to be taken of them. Even more, depending on employee’s knowledge, skills and work satisfaction, company’s results can differ. To ensure the success and development of the company, the integration process has to be implemented carefully. The theoretical part of the thesi...

The application of the FMEA method in the selected production process of a company

Directory of Open Access Journals (Sweden)

Piotr Barosz

2018-04-01

Full Text Available The aim of this article is to show the use of the analysis of the failure causes and effects as a prevention tool in controlling the quality of a given production process in the company. The scope of the work covers an analysis of a selected process, definition of inconsistencies present in this process, and then the FMEA analysis. In the production company one should implement thinking and actions based on the so-called ‘quality loop’ – it is an interdependence model of the undertaken actions which affect the quality shaping. It is carried out from the possibility for identifying a customer’s requirements through a project, production process, up to the assessment of effective capability for meeting the defined requirements. The application of such an approach enables to take the actions improving the operation of quality management in a systemic way.

Company Vision and Organizational Learning

Directory of Open Access Journals (Sweden)

Vojko Toman

2015-11-01

Full Text Available The effectiveness of a company is largely dependent on the company itself; it depends above all on its corporate governance, management, and implementation, as well as on decision-making processes and coordination. Many authors believe that organizational learning and knowledge are the most relevant aspects of company effectiveness. If a company wants to be effective it needs to create and realize its vision; to do this, it needs creativity, imagination, and knowledge, which can be obtained or enhanced through learning. This paper defines vision, learning, creativity and management and, above all, their relationships. The author argues that company vision influences the learning and knowledge of employees in the company through the vision’s content, through the vision-creating process, and through the vision enforcement process. Conversely, the influence of learning on company vision is explained. The paper is aimed at the use in the practice of companies and helps them to increase their effectiveness.

Relationship between organizational life cycle and budgeting process in mechanical metal company of high and middle Valley Itajaí

Directory of Open Access Journals (Sweden)

Leandro Marques

2014-09-01

Full Text Available The objective of this study was investigate the relationship of the different stages of organizational life cycle of companies in the field of mechanical metal in Alto and Médio Vale do Itajaí, with the profile of the budgeting process. The methodology used was characterized as descriptive performed by means of a survey, with a quantitative approach. We used a questionnaire with 54 questions divided into four blocks, adapted from Frezatti et al. (2010. The life cycle model in the implement of research is to Miller and Friesen (1984. Questionnaires were sent to 193 companies in the metal mechanic industry of the Alto and Médio Vale do Itajaí. We obtained 31 answers who were treated statistically by means of descriptive statistics, discriminant analysis and correlation analysis. The results show that most companies are in stages of birth and rejuvenation. It was also found that the budgeting process most commonly used by companies is budgetary control. It was identified that there is a relationship between budgeting process artifacts and the stage of life cycle that the company is, but this use occurs differently in each stage. Thus it is concluded that, as the company becomes more complex and advanced stages of the life cycle, the greater is the use of budgeting process, with significant drop in the use of these artifacts when the company is at the stage of decline.

Process-driven information management system at a biotech company: concept and implementation.

Science.gov (United States)

Gobbi, Alberto; Funeriu, Sandra; Ioannou, John; Wang, Jinyi; Lee, Man-Ling; Palmer, Chris; Bamford, Bob; Hewitt, Robin

2004-01-01

While established pharmaceutical companies have chemical information systems in place to manage their compounds and the associated data, new startup companies need to implement these systems from scratch. Decisions made early in the design phase usually have long lasting effects on the expandability, maintenance effort, and costs associated with the information management system. Careful analysis of work and data flows, both inter- and intradepartmental, and identification of existing dependencies between activities are important. This knowledge is required to implement an information management system, which enables the research community to work efficiently by avoiding redundant registration and processing of data and by timely provision of the data whenever needed. This paper first presents the workflows existing at Anadys, then ARISE, the research information management system developed in-house at Anadys. ARISE was designed to support the preclinical drug discovery process and covers compound registration, analytical quality control, inventory management, high-throughput screening, lower throughput screening, and data reporting.

CASE STUDY: THE IMPACT OF INNOVATION PROCESS ON TURNOVER OF GEO – TOPO COMPANY

Directory of Open Access Journals (Sweden)

Drienovski Kristina – Jana

2014-07-01

Full Text Available This paper presents a case study of the impact of innovation process on the turnover of the GEO - TOPO company in order to highlight the existence of less convenient situations where innovation costs are not included in income madeby the company. Thru this study the paperwork highlights the importance of company’s turnover despite the fact that this indicator is one that presents past performances. Most of the existing literature presents positive aspects of the innovation process, and for the future decisions recommends economic forecast. There are studies showing the risks of the innovation process, including the possibility of bankruptcy of the company due to the failure of the innovation process, but this work represents a practical reality, a point of arrival for the past research and a starting point for the future theories. Bibliographic documentation and research of the enterprises documents were the basis of confirmation for theories regarding the risks of innovation process and an anchor for issuing statements about the negative impact of innovation process on turnover. The results obtained in this study show the importance of turnover in future decisions of the enterprise in order to support an possible and immediate failure. This study has its limitation, because it refers to the result of a service provider SME that has introduced a process of organizational innovation. The results are accurate, this work is part of a broader research regarding the impact of innovation process on companies economic and financial performance. This research supports the entrepreneur in decisions making, comes as a backup plan to avoid bankruptcy, and proposes a closer connection between the marketing department and the accounting in an enterprise. In businesses that have outsourced accounting services, this study provides contractor necessary information for a correct decision without the need for a detailed explanation of the accounts and positions

Logística e troca eletrônica de informação em empresas automobilísticas e alimentícias Logistics and electronic information interchange in automotive and food companies

Directory of Open Access Journals (Sweden)

Karine Araújo Ferreira

2005-12-01

Full Text Available Este artigo analisa impactos na logística pela troca eletrônica de informações entre empresas (com uso de EDI - Electronic Data Interchange e Internet, destacando a diferença destes impactos em empresas das indústrias alimentícia e automobilística. As empresas são pressionadas por parceiros para adoção destas tecnologias: a montadora é a responsável na cadeia automobilística e o grande varejo é o disseminador na cadeia alimentícia. O EDI pressupõe relações contratuais entre as empresas. As processadoras de alimentos observaram redução de erros e no tempo dos ciclos de pedido, assim como melhoria na visibilidade dos estoques e no planejamento de transporte para distribuição de seus produtos. Já nas empresas da indústria automobilística, os impactos são mais significativos no tempo e custo de processamento de pedido, com redução nos níveis e custo de estoque e de transporte para suprimento. Os resultados são de pesquisa de natureza qualitativa - estudos de casos.This paper analyzes the impacts of electronic information exchange (EDI - Electronic Data Interchange and Internet toward companies' logistics performance, emphasizing the difference of these impacts within food and automobile industries. Companies are being impelled by their partners to adopt these information technologies, whether: vehicle assemblers are responsible for the automobile chain; and great retailers work as disseminators through the food chain. EDI's implementation requires contractual relations among companies. Therefore, food processing industries aim to reduce both errors and cycle-time orders; as well as to improve inventory visibility and transport planning in the distribution of its products. However, in the automobile companies segment, the impacts are more significant in time and order processing costs, with the reduction of inventory and transport level's costs for supplying. The presented results are of qualitative research nature

Working conditions and effects of ISO 9000 in six furniture-making companies: implementation and processes.

Science.gov (United States)

Karltun, J; Axelsson, J; Eklund, J

1998-08-01

What effects will the implementation of the quality standard ISO 9000 have regarding working conditions and competitive advantages? Which are the most important change process characteristics for assuring improved working conditions and other desired effects? These are the main questions behind this study of six furniture-making companies which implemented ISO 9000 during the period 1991-1994. The results show that customer requirement was the dominant goal to implement ISO 9000. Five of the six companies succeeded in gaining certification. The influence on working conditions was limited, but included better order and housekeeping, more positive attitudes towards discussing quality shortcomings, a few workplace improvements, work enrichment caused by additional tasks within the quality system and a better understanding of external customer demands. Among the negative effects were new, apparently meaningless, tasks for individual workers as well as more stress and more physically strenuous work. The effects on the companies included a decrease in external quality-related costs and improved delivery precision. The study confirms the importance for efficient change of the design of the change process, and identifies 'improvement methodology' as the most important process characteristic. Improved working conditions are enhanced by added relevant strategic goals and by a participative implementation process.

Indirect processes in electron-ion scattering

International Nuclear Information System (INIS)

Bottcher, C.; Griffin, D.C.; Pindzola, M.S.; Phaneuf, R.A.

1983-10-01

A summary is given of an informal workshop held at Oak Ridge National Laboratory on June 22-23, 1983, in which the current status of theoretical calculations of indirect processes in electron-ion scattering was reviewed. Processes of particular interest in astrophysical and fusion plasmas were emphasized. Topics discussed include atomic structure effects, electron-impact ionization, and dielectronic recombination

Indirect processes in electron-ion scattering

Energy Technology Data Exchange (ETDEWEB)

Bottcher, C.; Griffin, D.C.; Pindzola, M.S.; Phaneuf, R.A.

1983-10-01

A summary is given of an informal workshop held at Oak Ridge National Laboratory on June 22-23, 1983, in which the current status of theoretical calculations of indirect processes in electron-ion scattering was reviewed. Processes of particular interest in astrophysical and fusion plasmas were emphasized. Topics discussed include atomic structure effects, electron-impact ionization, and dielectronic recombination.

Organization of Business Processes of the Company on the Basis of the Systems Approach Teners

Directory of Open Access Journals (Sweden)

Vaganova Valentina

2016-01-01

Full Text Available The article considers the management specificity on the basis of the systems approach tenets and description of business processes of the industrial enterprises. As the Company is a service-provider, its functional features are taken into consideration when modeling the business processes. The authors highlight challenges the Company faces in performance management because the existing system doesn’t allow to predict the financial results at the stage of formation of orders portfolio, to evaluate adequacy of financial resources to objectives set and to operate cash flows. All these issues are considered in sufficient detail when analyzing a range of problems and are taken as a basis of the project on implementation of the budgeting system based on the process approach.

Electronic Timekeeping: North Dakota State University Improves Payroll Processing.

Science.gov (United States)

Vetter, Ronald J.; And Others

1993-01-01

North Dakota State University has adopted automated timekeeping to improve the efficiency and effectiveness of payroll processing. The microcomputer-based system accurately records and computes employee time, tracks labor distribution, accommodates complex labor policies and company pay practices, provides automatic data processing and reporting,…

THE MANAGEMENT OF DOCUMENTS AN OPTIMISING COMPONENT FOR A COMPANIES IT SYSTEM

Directory of Open Access Journals (Sweden)

Vaduva Florin

2008-05-01

Full Text Available In order to ensure success in the competitive world of business, companies must accommodate the needs of their clients, partners, employees and capital owner. Companies that pay attention to the way their documents and information are administrated are more prepared to face cost reduction and can respond much faster to the changes occurred on Basically, it is all about information and controlling it and thus the response time is minimum to any inquiries or demands that come from inside the informational system of the company. So, you need an efficient document management. Software solutions that come to your aid, in order to optimize this process are Electronic Document Management System.

Company analysis

DEFF Research Database (Denmark)

Jenster, Per V.; Hussey, David

This volume looks at the company appraisal as a whole, examining the continuing need to appraise companies as part of the continuing strategy process. Building from a sound basis of theory, the text aims to be practical and to give guidance to senior managers and others involved in the strategy...... process. It is thus a book primarily aimed at managers, but should also be useful for MBA students undertaking strategy assignments It provides helpful, practical guidance and identifies weaknesses of traditional methods. It also presents a variety of tools which may be used in the appraisal process...

Analysis of Expatriation Process in a Slovenian Company

Directory of Open Access Journals (Sweden)

Pintar Rok

2017-02-01

Full Text Available Background and Purpose: The multinational companies require different approach of human resource management to achieve their goals. The reason is in employees who are working abroad, so-called expatriates. The purpose of the research is to investigate perceptions and experience of the expatriates working in one of the Slovenian multinational company.

Marketing automation processes as a way to improve contemporary marketing of a company

Directory of Open Access Journals (Sweden)

Witold Świeczak

2013-09-01

Full Text Available The main aim of this article is to identify the possibilities which are given to contemporary companies thanks to the usage of processes included in marketing automation system. This publication deals with the key aspects of this issue. Its shows how the importance of the organization changes, how its value increases, as a result of using the tools which are provided by the processes included in the concept of marketing automation. This article defines the factors and processes which influence an effective course of actions taken as a part of marketing automation. Because the concept of marketing automation is a completely new reality; it is giving up the communication based on mass distribution of a uniform contents for really personalized individual and fully automated communication. This is a completely new idea, a kind of coexistence, in which both a sales department and a marketing department cooperate with each other closely to achieve the best result. It is also a situation in which marketing can definitely confirm its contribution to the income generated by the company. But marketing automation also means huge analytical possibilities and a real increase of a company’s value, its value added generated by the system – the source of information about clients, about all processes both marketing and sales, taking place in a company. The introduction of marketing automation system alters not only the current functioning of a marketing department, but also marketers themselves. In fact, everything that marketing automation system provides, including primarily accumulated unique knowledge of the client, is also a critical marketing value of every modern enterprise.

Electronic devices for analog signal processing

CERN Document Server

Rybin, Yu K

2012-01-01

Electronic Devices for Analog Signal Processing is intended for engineers and post graduates and considers electronic devices applied to process analog signals in instrument making, automation, measurements, and other branches of technology. They perform various transformations of electrical signals: scaling, integration, logarithming, etc. The need in their deeper study is caused, on the one hand, by the extension of the forms of the input signal and increasing accuracy and performance of such devices, and on the other hand, new devices constantly emerge and are already widely used in practice, but no information about them are written in books on electronics. The basic approach of presenting the material in Electronic Devices for Analog Signal Processing can be formulated as follows: the study with help from self-education. While divided into seven chapters, each chapter contains theoretical material, examples of practical problems, questions and tests. The most difficult questions are marked by a diamon...

Economic benefits analysis of listed companies in radiation processing

International Nuclear Information System (INIS)

Zhang Yingming; Xu Tao; Zhang Yue; Yang Bin; Zhao Wenying

2012-01-01

Radiation processing industry is an important part of civilian nuclear technology and develop rapidly during the past decade. Radiation modification of new materials industries use new technology to promote new product development and application and get good economic benefit. There are problems and bottlenecks during the development, such as how to implement the guideline of optimize the industrial structure and upgrade the product, and adapt the market develop law and need. By analysing the typical listed companies in this field together with the domestic economic development condition and future situation, we give the development strategy and method in the future. (authors)

High-Throughput Printing Process for Flexible Electronics

Science.gov (United States)

Hyun, Woo Jin

Printed electronics is an emerging field for manufacturing electronic devices with low cost and minimal material waste for a variety of applications including displays, distributed sensing, smart packaging, and energy management. Moreover, its compatibility with roll-to-roll production formats and flexible substrates is desirable for continuous, high-throughput production of flexible electronics. Despite the promise, however, the roll-to-roll production of printed electronics is quite challenging due to web movement hindering accurate ink registration and high-fidelity printing. In this talk, I will present a promising strategy for roll-to-roll production using a novel printing process that we term SCALE (Self-aligned Capillarity-Assisted Lithography for Electronics). By utilizing capillarity of liquid inks on nano/micro-structured substrates, the SCALE process facilitates high-resolution and self-aligned patterning of electrically functional inks with greatly improved printing tolerance. I will show the fabrication of key building blocks (e.g. transistor, resistor, capacitor) for electronic circuits using the SCALE process on plastics.

Towards an integration of affiliated companies energy audit process system at P.T Astra International

Science.gov (United States)

Telaga, Abdi Suryadinata; Hartanto, Indra Dwi; Audina, Debby Rizky; Prabowo, Fransiscus Dimas

2017-06-01

Environmental awareness, stringent regulation and soaring energy costs, together make energy efficiency as an important pillar for every company. Particularly, in 2020, the ministry of energy and mineral resources of Indonesia has set a target to reduce carbon emission by 26%. For that reason, companies in Indonesia have to comply with the emission target. However, there is trade-off between company's productivity and carbon emission. Therefore, the companies' productivity must be weighed against the environmental effect such as carbon emission. Nowadays, distinguish excessive energy in a company is still challenging. The company rarely has skilled person that capable to audit energy consumed in the company. Auditing energy consumption in a company is a lengthy and time consuming process. As PT Astra International (AI) have 220 affiliated companies (AFFCOs). Occasionally, direct visit to audit energy consumption in AFFCOs is inevitable. However, capability to conduct on-site energy audit was limited by the availability of PT AI energy auditors. For that reason, PT AI has developed a set of audit energy tools or Astra green energy (AGEn) tools to aid the AFFCOs auditor to be able to audit energy in their own company. Fishbone chart was developed as an analysis tool to gather root cause of audit energy problem. Following the analysis results, PT AI made an improvement by developing an AGEn web-based system. The system has capability to help AFFCOs to conduct energy audit on-site. The system was developed using prototyping methodology, object-oriented system analysis and design (OOSAD), and three-tier architecture. The implementation of system used ASP.NET, Microsoft SQL Server 2012 database, and web server IIS 8.

Project Communication in Functions, Process and Project-Oriented Industiral Companies

Science.gov (United States)

Samáková, Jana; Koltnerová, Kristína; Rybanský, Rudolf

2012-12-01

The article is focused on the project communication management. Industrial enterprises, which use project management must constantly search the new ways for improving. One of the possibilities is the change of management from a functional oriented to the projectoriented or process-oriented. Process-oriented and project-oriented companies have better project communication management during the all project life cycle. Communication in the project is a very important factor. According to the arguments of several authors, one of the biggest problem is that threaten the success of the project is just the communication. In each project is an important pillar - and that is communication. Only on the base of communication can the project move forward and achieve the target.

Simulating Policy Processes through Electronic Mail.

Science.gov (United States)

Flynn, John P.

1987-01-01

Focuses on the use of electronic mail for teaching and learning about social welfare policy processes and compares electronic mail as a simulation medium to more structured computer applications. (Author)

Multiple-electron processes in fast ion-atom collisions

International Nuclear Information System (INIS)

Schlachter, A.S.

1989-03-01

Research in atomic physics at the Lawrence Berkeley Laboratory Super-HILAC and Bevalac accelerators on multiple-electron processes in fast ion-atom collisions is described. Experiments have studied various aspects of the charge-transfer, ionization, and excitation processes. Examples of processes in which electron correlation plays a role are resonant transfer and excitation and Auger-electron emission. Processes in which electron behavior can generally be described as uncorrelated include ionization and charge transfer in high-energy ion-atom collisions. A variety of experiments and results for energies from 1 MeV/u to 420 MeV/u are presented. 20 refs., 15 figs

Marketing automation processes as a way to improve contemporary marketing of a company

OpenAIRE

Witold Świeczak

2013-01-01

The main aim of this article is to identify the possibilities which are given to contemporary companies thanks to the usage of processes included in marketing automation system. This publication deals with the key aspects of this issue. Its shows how the importance of the organization changes, how its value increases, as a result of using the tools which are provided by the processes included in the concept of marketing automation. This article defines the factors and processes which influenc...

Electron beam processing of combustion flue gases

International Nuclear Information System (INIS)

1987-07-01

This report contains the papers presented at the consultants' meeting on electron beam processing of combustion flue gases. The meeting provided an excellent opportunity for exchanging information and reviewing the current status of technology development. Characteristics of the electron beam processing recognized by the meeting are: capability of simultaneous removals of SO 2 and NO x , safe technology and simplicity of control, dry process without waste water to be treated, cost benefit of electron beam processing compared with conventional technology and the conversion of SO 2 and NO x to a by-product that can be used as agricultural fertilizer. A separate abstract was prepared for each of the 22 papers in this technical report

Beyond offshoring: assess your company's global potential.

Science.gov (United States)

Farrell, Diana

2004-12-01

In the past few years, companies have become aware that they can slash costs by offshoring: moving jobs to lower-wage locations. But this practice is just the tip of the iceberg in terms of how globalization can transform industries, according to research by the McKinsey Global Institute (MGI). The institute's yearlong study suggests that by streamlining their production processes and supply chains globally, rather than just nationally or regionally, companies can lower their costs-as we've seen in the consumer-electronics and PC industries. Companies can save as much as 70% of their total costs through globalization--50% from offshoring, 5% from training and business-task redesign, and 15% from process improvements. But they don't have to stop there. The cost reductions make it possible to lower prices and expand into new markets, attracting whole new classes of customers. To date, however, few businesses have recognized the full scope of performance improvements that globalization makes possible, much less developed sound strategies for capturing those opportunities. In this article, Diana Farrell, director of MGI, offers a step-by-step approach to doing both things. Among her suggestions: Assess where your industry falls along the globalization spectrum, because not all sectors of the economy face the same challenges and opportunities at the same time. Also, pay attention to production, regulatory, and organizational barriers to globalization. If any of these can be changed, size up the cost-saving (and revenue-generating) opportunities that will emerge for your company as a result of those changes. Farrell also defines the five stages of globalization-market entry, product specialization, value chain disaggregation, value chain reengineering, and the creation of new markets-and notes the different levers for cutting costs and creating value that companies can use in each phase.

LEOS 2002: summer electronics and signal processing symposium

International Nuclear Information System (INIS)

Karadzhinov, Ljupcho; Ivanovski, Zoran

2002-01-01

LEOS 2002 was the first Macedonian symposium on electronics and signal processing. It was organized in recognition to a growing need to exchange the research results as well as to raise competent discussions among different research groups from both academic and industrial environment in Macedonia. The topics covered in this meeting were defined by the IEEE experts as follows: Power Electronics, Industrial Electronics, Signal Processing, Image and Video Processing, Instrumentation and Measurements, Engineering in Medicine and Biology, Electron Devices and Automatic Control. Papers were mainly from Macedonia, but there was one invited lecture

Electron quantum optics as quantum signal processing

OpenAIRE

Roussel, B.; Cabart, C.; Fève, G.; Thibierge, E.; Degiovanni, P.

2016-01-01

The recent developments of electron quantum optics in quantum Hall edge channels have given us new ways to probe the behavior of electrons in quantum conductors. It has brought new quantities called electronic coherences under the spotlight. In this paper, we explore the relations between electron quantum optics and signal processing through a global review of the various methods for accessing single- and two-electron coherences in electron quantum optics. We interpret electron quantum optics...

Extracellular Electron Transport Coupling Biogeochemical Processes Centimeters

DEFF Research Database (Denmark)

Risgaard-Petersen, Nils; Fossing, Henrik; Christensen, Peter Bondo

2010-01-01

of the oxygen uptake in laboratory incubations of initially homogenized and stabilized sediment. Using microsensors and process rate measurements we further investigated the effect of the electric currents on sediment biogeochemistry. Dissolved sulfide readily donated electrons to the networks and could...... confirmed the depth range of the electric communication and indicated donation of electrons directly from organotrophic bacteria. The separation of oxidation and reduction processes created steep pH gradients eventually causing carbonate precipitation at the surface. The results indicate that electron...... exchanging organisms have major biogeochemical importance as they allow widely separated electron donors and acceptors to react with one another....

Visual control as a key factor in a production process of a company from automotive branch

Directory of Open Access Journals (Sweden)

Stanisław Borkowski

2013-04-01

Full Text Available This article presents a theoretical basis for one type of control in enterprises – visual control. It presents the meaning of visual control in the Toyota Production System and BOST researches as a tool of measure, among other things, the importance of visual control in production companies. The level of importance of visual control usage as one of the production process elements in the analysed company was indicated. The usage of visual control is a main factor in a production process of the analyzed company, the factor which provides continuous help to employees to check whether the process differs from the standard. The characteristic progression of production process elements was indicated and the SW factor (the use of visual control took the third place, PE factor (interruption of production when it detects a problem of quality turned out to be the most important one, while the least important was the EU factor (granting power of attorney down. The main tools for this evaluation: an innovative BOST survey - Toyota's management principles in questions, in particular, the Pareto-Lorenz diagram, radar graph and series of importance as graphical interpretation tools, were used to present the importance of each factor in relation to individual assessments.

Electronic processes in organic electronics bridging nanostructure, electronic states and device properties

CERN Document Server

Kudo, Kazuhiro; Nakayama, Takashi; Ueno, Nobuo

2015-01-01

The book covers a variety of studies of organic semiconductors, from fundamental electronic states to device applications, including theoretical studies. Furthermore, innovative experimental techniques, e.g., ultrahigh sensitivity photoelectron spectroscopy, photoelectron yield spectroscopy, spin-resolved scanning tunneling microscopy (STM), and a material processing method with optical-vortex and polarization-vortex lasers, are introduced. As this book is intended to serve as a textbook for a graduate level course or as reference material for researchers in organic electronics and nanoscience from electronic states, fundamental science that is necessary to understand the research is described. It does not duplicate the books already written on organic electronics, but focuses mainly on electronic properties that arise from the nature of organic semiconductors (molecular solids). The new experimental methods introduced in this book are applicable to various materials (e.g., metals, inorganic and organic mater...

SELECTED ISSUES OF COMPETITIVENESS POTENTIAL OF FRUIT AND VEGETABLE PROCESSING COMPANIES LOCATED IN THE WIELKOPOLSKIE VOIVODESHIP

Directory of Open Access Journals (Sweden)

Joanna Smoluk-Sikorska

2014-09-01

Full Text Available The paper discusses results of the research concerning potential and strategy of competitiveness of companies of fruit and vegetable processing industry located in the Wielkopolskie voivodeship. Special attention was paid to the assessment of the companies’ financial situation, their production resources, management system and adopted development strategies. The investigated companies are characterised by strong domestic market position, which is mainly results of the assessment of their financial situation. They asses competitiveness potential very high, particularly human resources and related with them management skills. Furthermore, most of the companies assess the use of strategy of quality control and specialisation strategy as high or very high.

Integrated control system for electron beam processes

Science.gov (United States)

Koleva, L.; Koleva, E.; Batchkova, I.; Mladenov, G.

2018-03-01

The ISO/IEC 62264 standard is widely used for integration of the business systems of a manufacturer with the corresponding manufacturing control systems based on hierarchical equipment models, functional data and manufacturing operations activity models. In order to achieve the integration of control systems, formal object communication models must be developed, together with manufacturing operations activity models, which coordinate the integration between different levels of control. In this article, the development of integrated control system for electron beam welding process is presented as part of a fully integrated control system of an electron beam plant, including also other additional processes: surface modification, electron beam evaporation, selective melting and electron beam diagnostics.

Acquisition and Merger Process Through the Eyes of Employees : A Case Study on How Change Management and Integration Process Affected the Employees of Company X

OpenAIRE

Maidell, Terhi

2015-01-01

This study is a case study about acquisition and merger process, which took place in February 2014, when Company X(name changed) bought three magazines and 42 employees were transferred from Company Y (name changed). The topic covers such issues as; change management during acquisition and merger from the employees’ point of view, how employees react to change and how they experience the change management process. The aim of the study is to understand the employee side of the story during cha...

Brand Building and Enhancement with Electronic Marketing Tools

Directory of Open Access Journals (Sweden)

Tadas Limba

2013-08-01

Full Text Available The changing buying habits of customers and the tendency of the growing number of purchasers on the internet force companies to move their business or part of their processes to the electronic environment, and this causes the need to evolve a marketing strategy and its implementation measures. Electronic marketing has recently forced specialists in this field to look for new ways to satisfy the needs and expectations of customers, which often are associated with intangible attributes, such as brand. However, the lack of e-business managers, focusing on brand meaning to the company, is obvious. Quite often it is limited only to advertisement. But this is only one of the possible electronic marketing tools used in brand building and its enhancement process. Still there is a lack of detailed analysis of electronic marketing tools used in brand building and enhancement in the electronic environment. So, the goal of this paper was to present brand building and enhancement with the electronic marketing tools process model. It was done via analysis of brand peculiarities in the electronic environment and the strategic brand building and enhancement process. The suggested model helps to understand the electronic marketing tools position, objectives and functions in brand building and enhancement context. Detailed analysis of brand in the electronic environment showed that its essence and significance remains the same as in the traditional environment, but differs in implementation. Brand idea is developed not only considering consumer perceptions and values, but also organization strategy, culture and values, which matches its employers’ perceptions and values towards brand. Brand essence is implemented via such brand components as 1 brand name, sign of ownership, legal protection; 2 functional capabilities; 3 emotional value; 4 risk reducing; 5 shorthand notation; 6 service components. Brand in the electronic environment is influenced by such factors

Process variation in electron beam sterilization

International Nuclear Information System (INIS)

Beck, Jeffrey A.

2012-01-01

The qualification and control of electron beam sterilization can be improved by the application of proven statistical analysis techniques such as Analysis of Variance (ANOVA) and Statistical Tolerance Limits. These statistical techniques can be useful tools in: •Locating and quantifying the minimum and maximum absorbed dose in a product. •Estimating the expected process maximum dose, given a minimum sterilizing dose. •Setting a process minimum dose target, based on an allowance for random measurement and process variation. •Determining the dose relationship between a reference dosimeter and process minimum and maximum doses. This study investigates and demonstrates the application of these tools in qualifying electron beam sterilization, and compares the conclusions obtained with those obtained using practices recommended in Guide for Process Control in Radiation Sterilization. The study supports the following conclusions for electron beam processes: 1.ANOVA is a more effective tool for evaluating the equivalency of absorbed doses than methods suggested in . 2.Process limits computed using statistical tolerance limits more accurately reflect actual process variability than the AAMI method, which applies +/−2 sample standard deviations (s) regardless of sample size. 3.The use of reference dose ratios lends itself to qualification using statistical tolerance limits. The current AAMI recommended approach may result in an overly optimistic estimate of the reference dose adjustment factor, as it is based on application of +/−2(s) tolerances regardless of sample size.

HMI Data Processing and Electronics Departmenmt. Scientific report 1984

International Nuclear Information System (INIS)

1985-01-01

The Data Processing and Electronics Department carries out application-centered R+D work in the fields of general and process-related data processing, digital and analog measuring systems, and electronic elements. As part of the HMI infrastructure, the Department carries out central data processing and electronics functions. The R+D activities of the Department and its infrastructural tasks were carried out in seven Working Groups and one Project Group: Computer systems; Mathematics and graphical data processing; Software developments; Process computer systems, hardware; Nuclear electronics, measuring and control systems; Research on structural elements and irradiation testing; Computer center and cooperation in the 'Central Project Leader Group of the German Research Network' (DFN). (orig./RB) [de

Meat Processing Company Staff as Innovation Intermediaries: Developing a Framework from New Zealand's Red Meat Sector

Science.gov (United States)

Westbrooke, Victoria; Guenther, Meike; Bewsell, Denise; Greer, Glen

2018-01-01

Purpose: Meat processing companies have the potential to raise farm and sector productivity by directly working with farmers. This study assesses how commercial companies can undertake the roles of innovation intermediaries to increase productivity in New Zealand's sheep and beef sector. Design/methodology/approach: This study uses a case study…

Electron collision data for polyatomic molecules in plasma processing and environmental processes

International Nuclear Information System (INIS)

Tanaka, H.; Kitajima, M.; Cho, H.

2002-01-01

The experimental studies for electron-polyatomic molecule collision are reviewed in connection with the plasma processing and environmental issues. Recent developments in electron scattering experiments on the differential cross section measurements for various processes such as elastic scattering, vibrational, and electronic excitations are summarized from high to low energy regions (1-100 eV). The need for cross-section data for a broad variety of molecular species is also discussed because there is an urgent need to develop an international program to provide the scientific and technological communities with authoritative cross sections for electron-molecule interactions

Accelerators in industrial electron beam processing

International Nuclear Information System (INIS)

Becker, R.C.

1984-01-01

High power electron beam accelerators are being used for a variety of industrial processes. Such machines can process a wide range of products at very high thruput rates and at very low unit processing costs. These industrial accelerators are now capable of producing up to 200 kW of electron beam power at 4.0 MV and 100 kW at 5.0 MV. At this writing, even larger units are contemplated. The reliability of these high power devices also makes it feasible to consider bremsstrahlung (x-ray) processing as well. In addition to the advance of accelerator technology, microprocessor control systems now provide the capability to coordinate all the operations of the irradiation facility, including the accelerator, the material handling system, the personnel safety system and various auxiliary services. Facility designs can be adapted to many different industrial processes, including use of the dual purpose electron/x-ray accelerator, to ensure satisfactory product treatment with good dose uniformity, high energy efficiency and operational safety and simplicity. In addition, equipment manufacturers like RDI are looking beyond their conventional DC accelerator technology; looking at high power 10-12 MeV linear accelerators with power levels up to 25 kW or more. These high power linear accelerators could be the ideal processing tool for many sterilization and food irradiation applications. (author)

Ion beam processing of advanced electronic materials

International Nuclear Information System (INIS)

Cheung, N.W.; Marwick, A.D.; Roberto, J.B.

1989-01-01

This report contains research programs discussed at the materials research society symposia on ion beam processing of advanced electronic materials. Major topics include: shallow implantation and solid-phase epitaxy; damage effects; focused ion beams; MeV implantation; high-dose implantation; implantation in III-V materials and multilayers; and implantation in electronic materials. Individual projects are processed separately for the data bases

Crisis Diagnosis in Anti-Crisis Management Process in a Company

OpenAIRE

Ruta Meiste; Sandra Jakstiene

2015-01-01

Crisis concept links up to its appearance area. Some different kinds and levels of crises have been found: we face with global, mainly nature cataclysm crises, state economic crises, corporate crises and individual or psychological crises. The research area of this paper is micro level, i.e. corporate crises or crisis in a company. However, it is emphasized that company is a sociotechnical system, performing in a complex environment, therefore crisis in a company is closely related to global ...

E-commerce in small and medium companies in the Republic of Croatia

Directory of Open Access Journals (Sweden)

Heri Bezić

2009-12-01

Full Text Available Fast progress of information-communication technology, distribution of computer networks and wider usage of Internet are basis for the new industrial revolution. Therefore, e-commerce presents new possibility of gathering competitive advantages on the world market, especially for small and medium companies. In order to determine the current stage of electronic readiness and electronic intensity of using the e-commerce in small and medium companies in Croatia, there was a research carried through micro, small and medium companies on national level. Although the acceptance of Internet technologies and implementation of e-commerce ensures to small and medium companies to compete on the world market with large companies and to have efective infuence on their growth and development, the research showed that Croatian micro, small and medium companies, despite of their high level of electronic readiness and implementation of modern information-communication technologies, are not favorable in their usage in everyday business. It is necessary to figure out the universal model to remove barriers for implementation and acceptance of e-commerce.

Closed-Loop Process Control for Electron Beam Freeform Fabrication and Deposition Processes

Science.gov (United States)

Taminger, Karen M. (Inventor); Hafley, Robert A. (Inventor); Martin, Richard E. (Inventor); Hofmeister, William H. (Inventor)

2013-01-01

A closed-loop control method for an electron beam freeform fabrication (EBF(sup 3)) process includes detecting a feature of interest during the process using a sensor(s), continuously evaluating the feature of interest to determine, in real time, a change occurring therein, and automatically modifying control parameters to control the EBF(sup 3) process. An apparatus provides closed-loop control method of the process, and includes an electron gun for generating an electron beam, a wire feeder for feeding a wire toward a substrate, wherein the wire is melted and progressively deposited in layers onto the substrate, a sensor(s), and a host machine. The sensor(s) measure the feature of interest during the process, and the host machine continuously evaluates the feature of interest to determine, in real time, a change occurring therein. The host machine automatically modifies control parameters to the EBF(sup 3) apparatus to control the EBF(sup 3) process in a closed-loop manner.

Impact of Electronic Signatures and Time Stamping for the Protection of Electronic Agreements

Directory of Open Access Journals (Sweden)

Tadas Limba

2012-12-01

Full Text Available The article e495 valuates the impact of e-signatures and time stamping on electronic contracts and electronic documents for performing e-business opportunities and goals, and analyses e-signature application for business cases. Various electronic services, virtual shopping, electronic cash transactions are becoming increasingly popular as they allow users to quickly perform different actions, operations and functions. It is important not only for convenience, but also to ensure consumer data security and reliability. Security reasons are not enough for security transmitted data, since this method does not allow clarification of information about sender identity.Use of electronic signatures, electronic identities, checgs and ensures a very high level of data security in interchange data processes. E-signature allows e-business companies to transfer the company’s operation business processes and their application to the organization and management in the electronic environment, also automate internal and external compans processes, includinggon-going business processes.The object of paper is .-signature and time stamping application in the theoretical and practical way.The goal of this paper while evaluating and estimating the .-signature and time stamping application, i’s regulation and legal implementation worldwidesand in Lithuania—is to provideluseful recommendations for more efficient impact developing -commerce and -business in situations when -signature and time stamping is used for ensuring electronic contracs security.

Impact of Electronic Signatures and Time Stamping for the Protection of Electronic Agreements

Directory of Open Access Journals (Sweden)

Tadas Limba

2013-02-01

Full Text Available The article e495 valuates the impact of e-signatures and time stamping on electronic contracts and electronic documents for performing e-business opportunities and goals, and analyses e-signature application for business cases. Various electronic services, virtual shopping, electronic cash transactions are becoming increasingly popular as they allow users to quickly perform different actions, operations and functions. It is important not only for convenience, but also to ensure consumer data security and reliability. Security reasons are not enough for security transmitted data, since this method does not allow clarification of information about sender identity. Use of electronic signatures, electronic identities, checgs and ensures a very high level of data security in interchange data processes. E-signature allows e-business companies to transfer the company’s operation business processes and their application to the organization and management in the electronic environment, also automate internal and external compans processes, includinggon-going business processes. The object of paper is .-signature and time stamping application in the theoretical and practical way. The goal of this paper while evaluating and estimating the .-signature and time stamping application, i’s regulation and legal implementation worldwidesand in Lithuania—is to provideluseful recommendations for more efficient impact developing -commerce and -business in situations when -signature and time stamping is used for ensuring electronic contracs security.

Electron beam curing of polymer matrix composites

International Nuclear Information System (INIS)

Janke, C.J.; Wheeler, D.; Saunders, C.

1998-01-01

The purpose of the CRADA was to conduct research and development activities to better understand and utilize the electron beam PMC curing technology. This technology will be used to replace or supplement existing PMC thermal curing processes in Department of Energy (DOE) Defense Programs (DP) projects and American aircraft and aerospace industries. This effort involved Lockheed Martin Energy Systems, Inc./Lockheed Martin Energy Research Corp. (Contractor), Sandia National Laboratories, and ten industrial Participants including four major aircraft and aerospace companies, three advanced materials companies, and three electron beam processing organizations. The technical objective of the CRADA was to synthesize and/or modify high performance, electron beam curable materials that meet specific end-use application requirements. There were six tasks in this CRADA including: Electron beam materials development; Electron beam database development; Economic analysis; Low-cost Electron Beam tooling development; Electron beam curing systems integration; and Demonstration articles/prototype structures development. The contractor managed, participated and integrated all the tasks, and optimized the project efforts through the coordination, exchange, and dissemination of information to the project participants. Members of the Contractor team were also the principal inventors on several electron beam related patents and a 1997 R and D 100 Award winner on Electron-Beam-Curable Cationic Epoxy Resins. The CRADA achieved a major breakthrough for the composites industry by having successfully developed high-performance electron beam curable cationic epoxy resins for use in composites, adhesives, tooling compounds, potting compounds, syntactic foams, etc. UCB Chemicals, the world's largest supplier of radiation-curable polymers, has acquired a license to produce and sell these resins worldwide

Shake-off processes at the electron transitions in atoms

International Nuclear Information System (INIS)

Matveev, V.I.; Parilis, Eh.S.

1982-01-01

Elementary processes in multielectron atoms - radiative and Auger transitions, photoionization and ionization by an electron impact etc. are usually followed by the relaxation of electron shells. The conditions under which such multielectron problem could be solved in the shake-off approximation are considered. The shake-off processes occurring. as a result of the electron transitions are described from the general point of view. The common characteristics and peculiar features of this type of excitation in comparison with the electron shake-off under nuclear transformations are pointed out. Several electron shake-off processes are considered, namely: radiative Auger effect, the transition ''two electrons-one photon'', dipole ionization, spectral line broadening, post collision interaction, Auger decay stimulated by collision with fast electrons, three-electron Auger transitions: double and half Auger effect. Their classification is given according to the type of the electron transition causing the shake-off process. The experimental data are presented and the methods of theoretical description are reviewed. Other similar effects, which could follow the transitions in electron shells are pointed out. The deduction of shake-off approximation is presented, and it is pointed out that this approach is analogous to the distorted waves approximation in the theory of scattering. It was shown that in atoms the shake-off approximation is a very effective method, which allows to obtain the probability of different electronic effects

Nobel prize winners from Siemens company

International Nuclear Information System (INIS)

Anon

2007-01-01

This paper deals with the history of discoveries and scientists which worked in the Siemens company. First Nobel prize winners from Siemens company was Gustav Ludwig Hertz from Hamburg. In his doctoral dissertation he deals with the study of collisions of electrons with molecules of gases. In the physics this experiment is known as 'Franc and Hertz experiment', which confirmed state of energy in Bohr theory and in 1925 he obtained Nobel prize. In 1945, as a director of the Department of physics in the research laboratories of Siemens, he constructed cyclotron kernel - magnet with mass of 80 tonnes. The second Nobel prize winner was Dennis Gabor worked in the Laboratory for measurement and medicinal technology in Siemensstadt (Berlin). When he tried to increase the resolution of electron microscopy he discovered the holography (method of 3-dimensional imaging). In 1971 he obtained the Nobel prize. The third scientist - Ernst Ruska discovered electron microscope. At Siemens, he was involved in developing the first commercially-produced electron microscope in 1939. In 1986, Ernst Ruska was awarded half of the Nobel Prize in Physics for his many achievements in electron optics.

Penning ionization processes studied by electron spectroscopy

International Nuclear Information System (INIS)

Yencha, A.J.

1978-01-01

The technique of measuring the kinetic energy of electrons ejected from atomic or molecular species as a result of collisional energy transfer between a metastable excited rare gas atom and an atom or molecule is known as Penning ionization spectroscopy. Like the analogous photoionization process of photoelectron spectroscopy, a considerable amount of information has been gained about the ionization potentials of numerous molecular systems. It is, in fact, through the combined analyses of photoelectron and Penning electron spectra that affords a probe of the particle-particle interactions that occur in the Penning process. In this paper a short survey of the phenomenon of Penning ionization, as studied by electron spectroscopy, will be presented as it pertains to the ionization processes of simple molecules by metastable excited atoms. (author)

Electron beam processing - status and prospects

International Nuclear Information System (INIS)

Cleland, M.R.

1989-01-01

A variety of commercial products now on the market are being produced by electron beam processing, which involves the treatment of materials with high-energy electrons to obtain beneficial effects. Ongoing applications include the high-speed curing of printing inks, clear and pigmented coatings, release coatings and adhesive films, the crosslinking of plastic film, foam, tubing, pipe, molded parts, electrical wire and cable, the cold vulcanization of rubber sheets for automobile tires and factory roofing as well as the sterilization of medical devices and packaging materials, and the preservation of food. Continuing growth is being driven by some inherent advantages of electron beam processing over alternative chemical and thermal treatment processes, such as enhanced product quality and lower unit costs that result from higher production rates, dynamic process control, quicker process start-up and shutdown, and reductions in scrap loss, energy consumption, floor space requirements, and toxic residues. Other potential applications that have not yet reached commercial fruition are focused on environmental protection and the reclamation of waste materials. These include the disinfection of potable water supplies, municipal waste water, sewage sludge, and the infectious wastes from hospitals and airports, the modification of toxic chemicals, the degradation of cellulosic materials, the cracking of crude oil and residual tars from refineries, and the extraction of sulfur and nitrogen oxides from combustion gases to reduce the effects of acid rain

Corporate rebranding processes in small companies:a multiple case study from the B2B software industry

OpenAIRE

Juntunen, M. (Mari)

2011-01-01

Abstract The purpose of the present study is to build a theoretically based and empirically grounded framework that enables a better understanding of corporate rebranding processes among small companies. Corporate rebranding is addressed from a visual viewpoint concentrating on changes to corporate name and logo. The theoretical background is based on corporate branding, corporate rebranding and organisational change literature. The research setting is small software companies that op...

Challenges in performance of food safety management systems: a case of fish processing companies in Tanzania.

Science.gov (United States)

Kussaga, Jamal B; Luning, Pieternel A; Tiisekwa, Bendantunguka P M; Jacxsens, Liesbeth

2014-04-01

This study provides insight for food safety (FS) performance in light of the current performance of core FS management system (FSMS) activities and context riskiness of these systems to identify the opportunities for improvement of the FSMS. A FSMS diagnostic instrument was applied to assess the performance levels of FSMS activities regarding context riskiness and FS performance in 14 fish processing companies in Tanzania. Two clusters (cluster I and II) with average FSMS (level 2) operating under moderate-risk context (score 2) were identified. Overall, cluster I had better (score 3) FS performance than cluster II (score 2 to 3). However, a majority of the fish companies need further improvement of their FSMS and reduction of context riskiness to assure good FS performance. The FSMS activity levels could be improved through hygienic design of equipment and facilities, strict raw material control, proper follow-up of critical control point analysis, developing specific sanitation procedures and company-specific sampling design and measuring plans, independent validation of preventive measures, and establishing comprehensive documentation and record-keeping systems. The risk level of the context could be reduced through automation of production processes (such as filleting, packaging, and sanitation) to restrict people's interference, recruitment of permanent high-skilled technological staff, and setting requirements on product use (storage and distribution conditions) on customers. However, such intervention measures for improvement could be taken in phases, starting with less expensive ones (such as sanitation procedures) that can be implemented in the short term to more expensive interventions (setting up assurance activities) to be adopted in the long term. These measures are essential for fish processing companies to move toward FSMS that are more effective.

Backshoring of Danish manufacturing companies: A learning process perspective

DEFF Research Database (Denmark)

Gustafson, Lasse; Pesoutova, Katerina; Turcan, Romeo V.

2017-01-01

The article summarizes a Master Thesis undertook in 2017 by Lasse Gustafson and Katerina Pesoutova, MSc students at International Business Centre at Aalborg University, supervised by Romeo V. Turcan. Rethinking previous Offshoring strategies and bringing production back home is a trend that more...... with the focus on Danish manufacturing companies in Northern Jutland. The findings are based on interviews conducted with companies in the region....

Conclusion: The balanced company

DEFF Research Database (Denmark)

Scheuer, John Damm; Jensen, Inger

2013-01-01

This concluding chapter brings together the various research findings of the book "The balanced company - organizing for the 21st Century" and develops a general overview of their implications for our understanding of the balancing processes unfolding in companies and organizations....

Electron processing of fibre-reinforced advanced composites

International Nuclear Information System (INIS)

Singh, A.; Saunders, C.B.; Barnard, J.W.; Lopata, V.J.; Kremers, W.; McDougall, T.E.; Chung, M.; Tateishi, Miyoko

1996-01-01

Advanced composites, such as carbon-fibre-reinforced epoxies, are used in the aircraft, aerospace, sporting goods, and transportation industries. Though thermal curing is the dominant industrial process for advanced composites, electron curing of similar composites containing acrylated epoxy matrices has been demonstrated by our work. The main attraction of electron processing technology over thermal technology is the advantages it offers which include ambient temperature curing, reduced curing times, reduced volatile emissions, better material handling, and reduced costs. Electron curing technology allows for the curing of many types of products, such as complex shaped, those containing different types of fibres and up to 15 cm thick. Our work has been done principally with the AECL's 10 MeV, 1 kW electron accelerator; we have also done some comparative work with an AECL Gammacell 220. In this paper we briefly review our work on the various aspects of electron curing of advanced composites and their properties. (Author)

Electron processing of fibre-reinforced advanced composites

Energy Technology Data Exchange (ETDEWEB)

Singh, A.; Saunders, C.B.; Barnard, J.W.; Lopata, V.J.; Kremers, W.; McDougall, T.E.; Chung, M.; Tateishi, Miyoko [Atomic Energy of Canada Ltd., Pinawa, MB (Canada). Whiteshell Labs.

1996-08-01

Advanced composites, such as carbon-fibre-reinforced epoxies, are used in the aircraft, aerospace, sporting goods, and transportation industries. Though thermal curing is the dominant industrial process for advanced composites, electron curing of similar composites containing acrylated epoxy matrices has been demonstrated by our work. The main attraction of electron processing technology over thermal technology is the advantages it offers which include ambient temperature curing, reduced curing times, reduced volatile emissions, better material handling, and reduced costs. Electron curing technology allows for the curing of many types of products, such as complex shaped, those containing different types of fibres and up to 15 cm thick. Our work has been done principally with the AECL`s 10 MeV, 1 kW electron accelerator; we have also done some comparative work with an AECL Gammacell 220. In this paper we briefly review our work on the various aspects of electron curing of advanced composites and their properties. (Author).

The peculiarities of process-based approach realization in transport sector company management

Science.gov (United States)

Khripko, Elena; Sidorov, Gennadiy

2017-10-01

In the present article we study the phenomena of multiple meaning in understanding process-based management method in construction of transport infrastructure facilities. The idea of multiple meaning is in distortions which appear during reception of the management process paradigm in organizational environment of transport sector. The cause of distortion in process management is organizational resistance. The distortions of management processes are discovered at the level of diffusion among spheres of responsibility, collision in forms of functional, project and process interaction between the owner of the process and its participants. The level of distortion is affected by the attitude towards the result of work which means that process understanding of the result is replaced by the functional one in practice of management. This transfiguration is the consequence of regressive defensive mechanisms of the organizational environment. On the base of experience of forming process management in construction of transport infrastructure facilities company of the issues of diagnostics of various forms of organizational resistance and ways of reducing the destructive influence on managing processes are reviewed.

General induction at companies - between an administrative process and a sociological phenomenon

Directory of Open Access Journals (Sweden)

Héctor L. Bermúdez Restrepo

2012-12-01

Full Text Available From the example of the process of general induction into the organization and using certain sociological resources, shows paradox are specialists in human management: is to carefor the motivation and the welfare of workers to achieve its high performance, their fidelity and his tenure at the company; However, current mutations of the social architecture in general and of work in particular –as structure of organized action– force thinking that organizational loyalty tends to be increasingly unlikely and that, conversely, the current personnel administration processes appear made inappropriate notions and appear to contribute directly to the adversities of human beings in organizational settings.

Failure of single electron descriptions of molecular orbital collision processes. [Electron promotion mechanism

Energy Technology Data Exchange (ETDEWEB)

Elston, S.B.

1978-01-01

Inner-shell excitation occurring in low and moderate (keV range) energy collisions between light atomic and ionic systems is frequently describable in terms of molecular promotion mechanisms, which were extensively explored both theoretically and experimentally. The bulk of such studies have concentrated on processes understandable through the use of single- and independent-electron models. Nonetheless, it is possible to find cases of inner-shell excitation in relatively simple collision systems which involve nearly simultaneous multiple-electron transitions and transitions induced by inherently two-electron interactions. Evidence for these many- and nonindependent-electron phenomena in inner-shell excitation processes and the importance of considering such effects in the interpretation of collisionally induced excitation spectra is discussed. 13 references.

CONVERSION OF FOREIGN COMPANIES ACCOUNTS IN THE ACCOUNT CONSOLIDATION PROCESS IN ROMANIA UNDER THE CLOSING RATE METHOD

Directory of Open Access Journals (Sweden)

Mariana BANUTA

2017-12-01

Full Text Available The article approaches a topical theme of debate both in the professional academic environment and especially in the economic practice, i.e. the manner of converting the accounts of foreign companies in the account consolidation process, in Romania. We analyse the conditions of applying the accounting regulations related to the consolidation of accounts, in Romania, focusing on the manner of converting the accounts of the foreign companies according to Order no. 1802/2014 approving the accounting regulations on individual annual financial statements and consolidated annual financial statements and to the International Financial Reporting Standards (IFRS. We focused on the presentation of the practical method of applying the conversion of the accounts of the foreign companies according to the closing rate method, because irrespective of the accounting referential applied by the parent company for consolidation, this method occurs in the pre-consolidation stage, if the group leader has affiliates abroad, and the individual financial statements of the companies in the consolidation perimeter have different disclosure currencies.

Business process redesign for effective e-commerce processes in the service industry

NARCIS (Netherlands)

Jansen - Vullers, M.H.; Reijers, H.A.

2003-01-01

Many companies have found out the hard way that successful e-commerce requires more than a flashy web presence. Existing business processes must be seamlessly integrated with the new, electronic form of interaction with suppliers and customers. Despite this insight, little research has focused on

Photons emission processes in electron scattering

International Nuclear Information System (INIS)

Soto Vargas, C.W.

1996-01-01

The investigations involving the scattering sections arising in virtual an real photon emission processes of electron and positron scattering by an atomic nucleus, have the need for thorough and complete calculations of the virtual photon spectrum and then introduce the distorted wave formulation, which is mathematically involved an numerically elaborated, but accessible to its use in experimental electron scattering facilities. (author) [es

International company restructuring and the effects on high-skilled employees in lead companies

DEFF Research Database (Denmark)

Hansen, Nana Wesley

2016-01-01

insulated from international restructuring processes. However, effects on wage and working conditions vary dependent on the motivation for restructuring, and as companies learn to take advantage of pools of skilled employees abroad. Continued international restructuring appear to challenge the insulation......International company restructuring involving knowledge intensive jobs causes increasing concern about the effect on the globalization of high-skilled employees. Drawing on case studies in four Danish-based companies, this article argues that high-skilled employees in lead companies are rarely...... of high-skilled workers over time. Further, the article shows that knowledge intensive Companies increasingly apply relational global value chain governance with multidirectional consequences for wage and working conditions among the high-skilled employees....

Electron beam processing system

International Nuclear Information System (INIS)

Kashiwagi, Masayuki

2004-01-01

Electron beam Processing Systems (EPS) are used as useful and powerful tools in many industrial application fields such as the production of cross-linked wire, rubber tire, heat shrinkable film and tubing, curing, degradation of polymers, sterilization and environmental application. In this paper, the feature and application fields, the selection of machine ratings and safety measures of EPS will be described. (author)

Strategy Assessment of Company ECOPOSTES

OpenAIRE

Cortazar Sanabria, Javier Mauricio

2015-01-01

This thesis focuses on developing a research on the different types of strategies a company can implement depending on their situation and the various analyses that must be completed before making the strategy decision. External and internal environment methods are described together with the various forms of corporate restructure methods a company can use if needed. The whole process is followed step by step to provide a strategy assessment to company Ecopostes, a Colombian company focused o...

Electron transfer and decay processes of highly charged iodine ions

International Nuclear Information System (INIS)

Sakaue, Hiroyuki A.; Danjo, Atsunori; Hosaka, Kazumoto

2005-01-01

In the present experimental work we have investigated multi-electron transfer processes in I q+ (q=10, 15, 20 and 25) + Ne, Ar, Kr and Xe collisions at 1.5q keV energy. The branching ratios between Auger and radiative decay channels have been measured in decay processes of multiply excited states formed by multi-electron transfer collisions. It has been shown that, in all the multi-electron transfer processes investigated, the Auger decays are far dominant over the radiative decay processes and the branching ratios are clearly characterized by the average principal quantum number of the initial excited states of projectile ions. We could express the branching ratios in high Rydberg states formed in multi-electron transfer processes by using the decay probability of one Auger electron emission. (author)

Martian Dust Devil Electron Avalanche Process and Associated Electrochemistry

Science.gov (United States)

Jackson, Telana L.; Farrell, William M.; Delory, Gregory T.; Nithianandam, Jeyasingh

2010-01-01

Mars' dynamic atmosphere displays localized dust devils and larger, global dust storms. Based on terrestrial analog studies, electrostatic modeling, and laboratory work these features will contain large electrostatic fields formed via triboelectric processes. In the low-pressure Martian atmosphere, these fields may create an electron avalanche and collisional plasma due to an increase in electron density driven by the internal electrical forces. To test the hypothesis that an electron avalanche is sustained under these conditions, a self-consistent atmospheric process model is created including electron impact ionization sources and electron losses via dust absorption, electron dissociation attachment, and electron/ion recombination. This new model is called the Dust Devil Electron Avalanche Model (DDEAM). This model solves simultaneously nine continuity equations describing the evolution of the primary gaseous chemical species involved in the electrochemistry. DDEAM monitors the evolution of the electrons and primary gas constituents, including electron/water interactions. We especially focus on electron dynamics and follow the electrons as they evolve in the E field driven collisional gas. When sources and losses are self-consistently included in the electron continuity equation, the electron density grows exponentially with increasing electric field, reaching an equilibrium that forms a sustained time-stable collisional plasma. However, the character of this plasma differs depending upon the assumed growth rate saturation process (chemical saturation versus space charge). DDEAM also shows the possibility of the loss of atmospheric methane as a function of electric field due to electron dissociative attachment of the hydrocarbon. The methane destruction rates are presented and can be included in other larger atmospheric models.

MULTICRITERIA METHODS IN PERFORMING COMPANIES’ RESULTS USING ELECTRONIC RECRUITING, CORPORATE COMMUNICATION AND FINANCIAL RATIOS

Directory of Open Access Journals (Sweden)

Ivana Bilić

2011-02-01

Full Text Available Human resources represent one of the most important companies’ resources responsible in creation of companies’ competitive advantage. In search for the most valuable resources, companies use different methods. Lately, one of the growing methods is electronic recruiting, not only as a recruitment tool, but also as a mean of external communication. Additionally, in the process of corporate communication, companies nowadays use the electronic corporate communication as the easiest, the cheapest and the simplest form of business communication. The aim of this paper is to investigate relationship between three groups of different criteria; including main characteristics of performed electronic recruiting, corporate communication and selected financial performances. Selected companies were ranked separately by each group of criteria by usage of multicriteria decision making method PROMETHEE II. The main idea is to research whether companies which are the highest performers by certain group of criteria obtain the similar results regarding other group of criteria or performing results.

Alliances and partnering: A new relationship between oil/gas producing companies and service companies

International Nuclear Information System (INIS)

Gazi, N.H.; Hottman, W.E.; Logan, J.L.; Verrett, R.C.

1995-01-01

The current state of the energy industry finds both operating and service companies squeezed by lower prices and higher costs. Investment in exploration, equipment, and technology has been severely restricted. Many operators are responding to these harsh market conditions by re-engineering their work processes and focusing on core business activities. Re-engineered work processes encourage operators and service companies to work closely together. This motivates both to eliminate duplication, simplify processes, increase efficiency and capitalize on combined expertise to enhance production and optimize total system cost. Alliances and partnering are based on mutual trust and the commitment to add value to both organizations. Aligning interests is fundamental in establishing a lasting and mutually beneficial relationship. This paper presents an overview of these new relationships. The benefits and concerns of changing from traditional bidding agreements to new business arrangements between producing companies and service companies is discussed. Evaluation criteria for potential candidates, how to structure an alliance or partnering agreement, and a discussion of the key issues in the application of incentive contracts is presented

Application of Lean Focus onManufacturing Process : A Case Study of an American Furniture Company

OpenAIRE

ZHAO, QIAN; ZHOU, BOWEN

2010-01-01

Introduction: To improvement the target company’s manufacturing process by applyinglean principles, including using and analyzing the internal value stream mapping. Asmore and more companies have paid attention to implement lean thinking in theirmanufacturing process, the value stream mapping played an important role for manycompanies to make a transition from their traditional production systems to lean systems.The content and resources of this master thesis come from an American furnitureco...

Evaluation of electron beam stabilization for ion implant processing

Science.gov (United States)

Buffat, Stephen J.; Kickel, Bee; Philipps, B.; Adams, J.; Ross, Matthew F.; Minter, Jason P.; Marlowe, Trey; Wong, Selmer S.

1999-06-01

With the integration of high energy ion implant processes into volume CMOS manufacturing, the need for thick resist stabilization to achieve a stable ion implant process is critical. With new photoresist characteristics, new implant end station characteristics arise. The resist outgassing needs to be addressed as well as the implant profile to ensure that the dosage is correct and the implant angle does not interfere with other underlying features. This study compares conventional deep-UV/thermal with electron beam stabilization. The electron beam system used in this study utilizes a flood electron source and is a non-thermal process. These stabilization techniques are applied to a MeV ion implant process in a CMOS production process flow.

IMPORTANCE OF LIQUIDITY ANALYSIS IN THE PROCESS OF FINANCIAL MANAGEMENT OF COMPANIES OPERATING IN THE TOURISM SECTOR IN SLOVAKIA: AN EMPIRICAL STUDY

Directory of Open Access Journals (Sweden)

Vladimir Hiadlovsky

2016-12-01

Full Text Available The article defines the financial analysis, with the emphasis on the liquidity analysis, as an essential tool of the corporate financial management process. The main objective of the article is, based on the statistical verification, to analyse liquidity of companies operating in the tourism sector, namely companies providing accommodation services, identify the key factors which influence the level and development of liquidity and therefore, when managed appropriately, may bring the improvement in liquidity management leading to the enhancement of the quality of the financial management process in companies and to their excellence. On the selected sample of companies operating in the tourism sector in Slovakia, the research results reveal the low long-term level of average current and total liquidity for the 2011 to 2014 period and indicate moderate to weak relationship between selected liquidity and profitability ratios. As liquidity is one of the areas reflecting one side of company's performance, its systematic and proper management may help companies achieve their goals on the way to excellence.

Recent advances in electron beam processing of polymers

International Nuclear Information System (INIS)

Gueven, Olgun

2005-01-01

The synergy achieved through developments on the design and manufacturing of new low, medium and high energy electron accelerators with relatively high powers and innovative solutions in material formulation better responding to radiation processing has opened new application opportunities in electron beam treatment of polymers. All these developments are still based however, on the major ultimate effects of ionizing radiation on polymers namely, crosslinking, curing, grafting and chain scissionning. The objective of this paper is to provide an overview of recent developments and emerging applications toward commercialization of electron beam processing of polymers. (author)

Electron - ion recombination processes - an overview

International Nuclear Information System (INIS)

Hahn, Yukap

1997-01-01

Extensive theoretical and experimental studies have been carried out for the past 20 years on electron - ion recombination processes, as they are applied to the analysis of astrophysical and laboratory plasmas. We review the basic understanding gained through these efforts, with emphasis on some of the more recent progress made in recombination theory as the recombining system is affected by time-dependent electric fields and plasma particles at low temperature. Together with collisional ionization and excitation processes, recombination is important in determining ionization balance and excited-state population in non-equilibrium plasmas. The radiation emitted by plasmas is usually the principal medium with which to study the plasma condition, as it is produced mainly during the recombination and decay of excited states of ions inside the plasma. This is especially true when the plasma under study is not readily accessible by direct probes, as in astrophysical plasmas. Moreover, external probes may sometimes cause undesirable disturbances of the plasma. Electron-ion recombination proceeds in several different modes. The direct modes include three-body recombination (TBR) and one-step radiative recombination (RR), all to the ground- and singly-excited states of the target ions. By contrast, the indirect resonant mode is a two-step dielectronic recombination (DR), which proceeds first with the formation of doubly-excited states by radiationless excitation/capture. The resonant states thus formed may relax by autoionization and/or radiative cascades. For more exotic modes of recombination, we consider off-shell dielectronic recombination (radiative DR = RDR), in which an electron capture is accompanied by simultaneous radiative emission and excitation of the target ion. Some discussion on attachment of electrons to neutral atoms, resulting in the formation of negative ions, is also given. When resonance states involve one or more electrons in high Rydberg states

Improvement Of Search Process In Electronic Catalogues

Directory of Open Access Journals (Sweden)

Titas Savickas

2014-05-01

Full Text Available The paper presents investigation on search in electronic catalogues. The chosen problem domain is the search system in the electronic catalogue of Lithuanian Academic Libraries. The catalogue uses ALEPH system with MARC21 bibliographic format. The article presents analysis of problems pertaining to the current search engine and user expectations related to the search system of the electronic catalogue of academic libraries. Subsequent to analysis, the research paper presents the architecture for a semantic search system in the electronic catalogue that uses search process designed to improve search results for users.

The use of electron beam for production of tough materials: The Italian experience

International Nuclear Information System (INIS)

Lavalle, M.

2004-01-01

The Institute for the Organic Synthesis and Photoreactivity (Bologna, Italy) of the National Research Council is involved in activities carried out together with other scientific institutions (Department of Chemical Engineering, Processing and Materials of the University of Palermo) and an aerospace and defense company (Proel Tecnologie, Firenze, Italy). The research activity is related to: - study of the electron beam curing process of resins in order to better understand the curing mechanism and the influences of the processing parameters, e.g. the electron pulse frequency, which is related to the delivered dose rate; and - study of the electron beam polymerization of MMA in the presence of rubber as an alternative and innovative way to produce tough materials as compared to conventional blending (both physical and chemical). The activity carried out with private companies is related to the irradiation of single items and prototypes to be used for mechanical testing and characterization or for particular applications. (author)

Travail, transparency and trust : a case study of computer-supported collaborative supply chain planning in high-tech electronics

NARCIS (Netherlands)

Akkermans, H.A.; Bogerd, P.; van Doremalen, J.B.M.

2004-01-01

Describes a case study of supply chain collaboration facilitated by a decision support environment in a high-tech electronics supply chain with multiple independent companies. In a business process called collaborative planning, representatives from these companies jointly take decisions regarding

Utilization of electron beam accelerators for polymer processing

International Nuclear Information System (INIS)

Sarma, K.S.S.

2013-01-01

During the last decade, electron beam processing has been amply demonstrated to the Indian cable industry by BARC using 2 MeV/20 kW electron beam (EB) accelerator (ILU-6 EBA facility) located at BARC-BRIT complex, Vashi. The electron beam accelerator is a machine producing high energy electrons which are made to impinge on the materials for inducing physical, chemical and biological modifications. The process is carried out at room temperature and in ambient atmospheric conditions. Lately, quite a few numbers of accelerators have been installed by the private cable industry and carrying out cross-linking of cable insulations for high performance viz. high temperature stability, good flame retardancy, lesser solvent-swelling, thinner insulations etc. The indigenously made accelerators at EB centre, particularly the 3 MeV/30 kW accelerator will be of much help for Indian industry for polymer processing as the market is poised to grow by adapting the technology

Organizational Diagnosis in Project-Based Companies

Directory of Open Access Journals (Sweden)

Behrouz Zarei

2014-05-01

Full Text Available The purpose of this article is to develop a new method for corporate diagnosis (CD. To this end, a method is developed for the diagnosis process of project-based companies. The article presents a case study in a large company where data have been collected through focus groups. Project delay, high project cost, and low profitability are examples of project deficiency in project-based companies. Such issues have made managers pay special attention to find effective solutions to improve them. Prominent factors are inappropriate strategy, structure, system, human resource management, and PMBOK(Project Management Body of Knowledge processes. Thus, CD and analysis is an important task in improvement of corporate performance. The CD model that is developed in this article could be used for project-based companies. The proposed method can be used for CD in any project-based company. This article provides an emphatic application of CD as a prerequisite for restructuring in project-based companies.

Using ERP Systems to Transform Business Processes: A Case Study at a Precession Engineering Company

Directory of Open Access Journals (Sweden)

C.K.M.Lee

2009-10-01

Full Text Available Enterprises nowadays strive to keep transforming their business processes in accordance with the fastchanging customer demands so as to survive the intense global competition. In an attempt to provide practitioners with an insight into ERP implementation and the resulting business performances, this paper investigate how a successful ERP implementation can help transform enterprises processes. Case based research which is based on an in-depth observation under managerial and practitioner situation. A case study at a precession engineering company is conducted to evaluate the feasibility of the proposed strategic enterprise information model. This paper focuses on the implementation of Sales & Marketing and Warehouse modules of an ERP system. The key performance indicators are used to evaluate how the ERP implementation can improve the business processes. It is found that ERP helps to improve data visibility and improve on-time delivery but less effective on improving employee productivity. This research proposes an enterprise information model to exploit what strategy should be formulate and how ERP tactic can be implemented in company to enhance enterprise competitive advantages. The strategic enterprise information model is formulated based on our in-depth case study and ERP consultant's experience.

The application and processing of paints hardened by electron beams

International Nuclear Information System (INIS)

Anon.

1984-01-01

Electron beam hardening is a process for changing liquid surface coatings of different thicknesses by irradiation with electrons of high energy into solid, hard, elastic films. In contrast to the UV process, one can harden pigmented paints with electron beams. An electron accelerator, which remits free electrons is used as the energy source for starting the chemical reaction in the coating material. In order to irradiate flat parts, which were coated with liquid paint by rolling, pouring or spraying, equally with electrons, one must produce an 'electron curtain', similar to that in a paint pouring machine. (orig./PW) [de

Materials, Processes, and Facile Manufacturing for Bioresorbable Electronics: A Review.

Science.gov (United States)

Yu, Xiaowei; Shou, Wan; Mahajan, Bikram K; Huang, Xian; Pan, Heng

2018-05-07

Bioresorbable electronics refer to a new class of advanced electronics that can completely dissolve or disintegrate with environmentally and biologically benign byproducts in water and biofluids. They have provided a solution to the growing electronic waste problem with applications in temporary usage of electronics such as implantable devices and environmental sensors. Bioresorbable materials such as biodegradable polymers, dissolvable conductors, semiconductors, and dielectrics are extensively studied, enabling massive progress of bioresorbable electronic devices. Processing and patterning of these materials are predominantly relying on vacuum-based fabrication methods so far. However, for the purpose of commercialization, nonvacuum, low-cost, and facile manufacturing/printing approaches are the need of the hour. Bioresorbable electronic materials are generally more chemically reactive than conventional electronic materials, which require particular attention in developing the low-cost manufacturing processes in ambient environment. This review focuses on material reactivity, ink availability, printability, and process compatibility for facile manufacturing of bioresorbable electronics. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Strategic Management: Business Model Canvas for Start-Up Company

OpenAIRE

Sonninen, Anna

2016-01-01

Thesis is written about development of Kakunpala as a Start-Up Company, because development processes and ideas are the key factors for future success of the company. The aim of this thesis is to understand Strategic Management of the Company and Development processes,by using the SWOT analysis before and after development and by applying Business Model Canvas template to the Start-Up Company, and by describing Customer Journey: what relations Kakunpala has with clients and its processes...

Quantum tunneling resonant electron transfer process in Lorentzian plasmas

International Nuclear Information System (INIS)

Hong, Woo-Pyo; Jung, Young-Dae

2014-01-01

The quantum tunneling resonant electron transfer process between a positive ion and a neutral atom collision is investigated in nonthermal generalized Lorentzian plasmas. The result shows that the nonthermal effect enhances the resonant electron transfer cross section in Lorentzian plasmas. It is found that the nonthermal effect on the classical resonant electron transfer cross section is more significant than that on the quantum tunneling resonant charge transfer cross section. It is shown that the nonthermal effect on the resonant electron transfer cross section decreases with an increase of the Debye length. In addition, the nonthermal effect on the quantum tunneling resonant electron transfer cross section decreases with increasing collision energy. The variation of nonthermal and plasma shielding effects on the quantum tunneling resonant electron transfer process is also discussed

Persian Records by the Lindström Company: Triangle of Political Relationships, Local Agents and Recording Company

NARCIS (Netherlands)

Mohammadi, M.

2011-01-01

The earliest engagement of German gramophone companies in recording Persian music dates back to 1906-7, when three tracks were recorded for the Beka Company and a dozen recordings were issued on the Globophon label. About twenty years later the Lindström company was engaged in the process of

Stimulating the Competitiveness of the Macedonian Economy through the Process of Stimulation the Internationalization of the Companies

Directory of Open Access Journals (Sweden)

Jovanka Damoska Sekuloska

2015-08-01

Full Text Available The research in this paper is to be focused on examining the internationalization of the Macedonian companies as a prerequisite in improvement of Macedonian competitiveness. Internationalization as a process of integration in international economic activities contributes to overcome the sizes of national markets. According to the World Economic Forum (WEF the size of the market is one of the pillars of competitiveness and it is revealed as one of the limitation of the competitiveness of Macedonian economy. The contemporary theories of competitiveness recognize the necessity of quantitative and qualitative improvement of the process of internationalization of the companies. Quantitative improvement means involving not only trade but also outward FDI and the new quality signifies the necessity of restructuring the economic activities towards employing and creating innovation based processes, as (Porter, 1990accents that a nation’s competitiveness depends on the capacity of its industry to innovate and upgrade. Using data of some target Central European and Baltic (CEB economies, it will be examined interrelationships between the internationalization and competitiveness and policies that influence the improvement and stimulation of internationalization process.

Two-process approach to electron beam welding control

International Nuclear Information System (INIS)

Lastovirya, V.N.

1987-01-01

The analysis and synthesis of multi-dimensional welding control systems, which require the usage of computers, should be conducted within the temporal range. From the general control theory point two approaches - one-process and two-process - are possible to electron beam welding. In case of two-process approach, subprocesses of heat source formation and direct metal melting are separated. Two-process approach leads to two-profile control system and provides the complete controlability of electron beam welding within the frameworks of systems with concentrated, as well as, with distributed parameters. Approach choice for the given problem solution is determined, first of all, by stability degree of heat source during welding

Company car study 2011. Reduction of environmental impacts by influencing the selection process of company cars; Tyoesuhdeautotutkimus 2011. Ympaeristoehaittojen vaehentaeminen autonvalinnan ohjauksella

Energy Technology Data Exchange (ETDEWEB)

NONE

2012-07-01

The purpose of the study is to identify: What kinds of operational models directing towards eco-friendlier company car use there are and which are in use. What kinds of practical impacts these operational models have had. What is the demand for company car use and what changes have taken place from the viewpoint of companies and beneficiaries. What factors should the best company car taxation include in terms of directiveness (from the environmental point of view). The main objective is to find directive factors in company car use which would result in smaller environmental impacts and which company car users could commit themselves to. The main target groups of the study were the recipients of company car benefits, and enterprises using company cars. Company cars are mainly used for two reasons: in many organisations, work is carried out where the customer is, in which case company cars are used for reducing travel costs. On the other hand, a company car is a significant means for attracting and motivating employees, especially skilled experts and management staff. Company cars also play a significant role in the replacement rate of Finnish motor vehicles. The car selection rules of organisations determine the roles that entitle an employee to have a company car and how they can choose their car. Factors restricting the choice are usually CO{sub 2} and the price and make of the car. The CO{sub 2} limit is used by about 70% of organisations. According to this study, the average emission limit is 168 g/km, depending on the company and the position of the beneficiary. However, the average CO{sub 2} emissions of new company cars are currently about 140 g/km, and therefore the emission limits of organisations have not followed the development of motor technology. In entrepreneurship, environmental issues will be regarded as very important in the future, and there is also a notion for this to be reflected in the guidelines for selecting company cars. Emissions reduction

Applications of cross sections for electron-molecule collision processes

International Nuclear Information System (INIS)

Cartwright, D.C.

1985-01-01

The role of electron-molecule collision cross sections is discussed for the study of the ionospheric and auroral processes in planetary atmospheres and of discharge-pumped lasers. These two areas emphasize the importance of further theoretical and experimental studies concerning electron-impact processes. 13 refs., 3 figs., 2 tabs

APPLICATION OF THE CP METHODOLOGY IN REDUCTION OF WASTE IN THE PROCESSING OF TOBACCO COMPANIES

Directory of Open Access Journals (Sweden)

André Luiz Emmel Silva

2015-01-01

Full Text Available The production, marketing and processing of tobacco are the base of the municipalities of Vale do Rio Pardo / RS economy. Although it is the raw material for various products, this region is intended almost exclusively for the production of cigarettes. Dominated by a few large multinational, this market moves this imposing financial values, where tobacco is much of the cost of production. Thus, this paper seeks to prove the efficiency of the methodology application Cleaner Production (CP in tobacco waste reduction within the tobacco processing and cigarette manufacturing companies. This analysis was conducted as a case study, carrying out visits to the knowledge production process, identifying the points of waste, taking measurements and developing a set of measures to be taken to minimize these losses. The Cleaner Production method was chosen because it is a relatively new concept and it has shown good results in companies where it is located. Through the measurements, the main points of breaks were identified and then an analysis was performed by applying the concepts of CP, and a set of measures has been proposed to reduce losses. As a result, it was achieved a reduction of 83% in the rate of tobacco waste in the production process. It was concluded that the CP, within the tobacco processing industry, was efficient, impacting directly on production costs, rationalizing the use of raw materials and reducing the total volume of waste generated.

Progress of electron processing system useful for environmental preservation

International Nuclear Information System (INIS)

Hoshi, Yasuhisa

1998-01-01

Electron Processing has been used in the field of industrial application, mainly to process plastics or polymers, which is represented by the cross-linking of Polyethylene to improve heat resistance. On the other hand, there has been many research studies to use Electron Beam for an environmental preservation. Typical examples are Sterilization of Food, Flue Gas Treatment, Sterilization of Waste Water Sludge, Purification of Water, Removal of Volatile Organic Compound (VOC), etc. These research works have been done in the USA, Germany, Austria, Japan, etc. They reported some of the features of electron beam method. In addition, there is an unique report that the combination of Ozone and Electron Beam provides a better efficiency of the purification of the water. Recently, they have started the investigation for the practical use of Electron Beam in the environmental application. Flue gas treatment is a remarkable example of the investigation. They built the demonstration plant last year and they started the operation last fall. Presently, the system is in a demonstrative operation. This paper will report an outline of the R and D works of environmental applications of Electron Beam and also will introduce the latest technologies of Electron Processing Systems which will be available for the environmental preservation. (author)

Benchmarking in Mobarakeh Steel Company

OpenAIRE

Sasan Ghasemi; Mohammad Nazemi; Mehran Nejati

2008-01-01

Benchmarking is considered as one of the most effective ways of improving performance in companies. Although benchmarking in business organizations is a relatively new concept and practice, it has rapidly gained acceptance worldwide. This paper introduces the benchmarking project conducted in Esfahan's Mobarakeh Steel Company, as the first systematic benchmarking project conducted in Iran. It aims to share the process deployed for the benchmarking project in this company and illustrate how th...

Toward Joint Medical Logistics 2010 and Beyond: Process Innovation and Redesign of Class VIII Supply Chain at a Medical Logistics Company

National Research Council Canada - National Science Library

Augustitus, Mary

2000-01-01

.... Medical Logistics Company (Med Log Co), process map the "as is" baseline process and propose possible "to be" process redesign alternatives that will possibly improve efficiency and produce long-term cost savings...

Towards a New Paradigm of Software Development: an Ambassador Driven Process in Distributed Software Companies

Science.gov (United States)

Kumlander, Deniss

The globalization of companies operations and competitor between software vendors demand improving quality of delivered software and decreasing the overall cost. The same in fact introduce a lot of problem into software development process as produce distributed organization breaking the co-location rule of modern software development methodologies. Here we propose a reformulation of the ambassador position increasing its productivity in order to bridge communication and workflow gap by managing the entire communication process rather than concentrating purely on the communication result.

The multiple market-exposure of waste management companies: A case study of two Swedish municipally owned companies

International Nuclear Information System (INIS)

Corvellec, Hervé; Bramryd, Torleif

2012-01-01

Highlights: ► Swedish municipally owned waste management companies are active on political, material, technical, and commercial markets. ► These markets differ in kind and their demands follow different logics. ► These markets affect the public service, processing, and marketing of Swedish waste management. ► Articulating these markets is a strategic challenge for Swedish municipally owned waste management. - Abstract: This paper describes how the business model of two leading Swedish municipally owned solid waste management companies exposes them to four different but related markets: a political market in which their legitimacy as an organization is determined; a waste-as-material market that determines their access to waste as a process input; a technical market in which these companies choose what waste processing technique to use; and a commercial market in which they market their products. Each of these markets has a logic of its own. Managing these logics and articulating the interrelationships between these markets is a key strategic challenge for these companies.

The process evaluation of two alternative participatory ergonomics intervention strategies for construction companies.

Science.gov (United States)

Visser, Steven; van der Molen, Henk F; Sluiter, Judith K; Frings-Dresen, Monique H W

2018-03-26

To gain insight into the process of applying two guidance strategies - face-to-face (F2F) or e-guidance strategy (EC) - of a Participatory Ergonomics (PE) intervention and whether differences between these guidance strategies occur, 12 construction companies were randomly assigned to a strategy. The process evaluation contained reach, dose delivered, dose received, precision, competence, satisfaction and behavioural change of individual workers. Data were assessed by logbooks, and questionnaires and interviews at baseline and/or after six months. Reach was low (1%). Dose delivered (F2F: 63%; EC: 44%), received (F2F: 42%; EC: 16%) were not sufficient. The precision and competence were sufficient for both strategies and satisfaction was strongly affected by dose received. For behavioural change, knowledge (F2F) and culture (EC) changed positively within companies. Neither strategy was delivered as intended. Compliance to the intervention was low, especially for EC. Starting with a face-to-face meeting might lead to higher compliance, especially in the EC group. Practitioner Summary: This study showed that compliance to a face-to-face and an e-guidance strategy is low. To improve the compliance, it is advised to start with a face-to-face meeting to see which parts of the intervention are needed and which guidance strategy can be used for these parts. ISRCTN73075751.

Environmental and Economic Performance: Ecoinnovation Practices in Biodigesters of Cassava Processing Companies

Directory of Open Access Journals (Sweden)

Alexandre Rodrigues da Silva

2016-12-01

Full Text Available Biomass, considered one of the main sources of alternative energy, originates from residual organic material such as the cassava crop. Biodigesters are capable of transforming these residuals into biogas and biofertilizers. This allows a reduction of almost 80% in the residual organic material being deposited in the earth or rivers, avoiding deposits accumulating on riverbeds and negative environmental impacts. It also allows substantial savings in terms of energy. The general aim of this study is to investigate, with the implementation of biodigesters, how eco-innovation practices contribute to the economic and environmental performance of cassava processing companies in Paraná State. Through qualitative research, the method employed an exploratory approach and intensive multiple-case analyses, with data collected through semi-structured interviews. The study showed that the eco-innovation practices that were adopted aided the economic and environmental performance of the companies in question. The study contributes to academia with scientific research on biodigester technology using the residual organic material of cassava for sustainable development. It also contributes to the corporate universe by demonstrating an opportunity for sustainable innovation with improved economic and environmental performance, which can be extrapolated to other industrial segments.

Architecture for Cross-Organizational Business Processes

NARCIS (Netherlands)

Hoffner, Yigal; Ludwig, Heiko; Gülcü, Ceki; Grefen, P.W.P.J.

Efficient means of electronic interaction are an essential requirement for the integration of different companies' business processes along the value chain. Until recently, this interaction relied on expensive, complex and inflexible solutions, mostly based on EDI or some proprietary means. The high

A Project Strategic Index proposal for portfolio selection in electrical company based on the Analytic Network Process

Energy Technology Data Exchange (ETDEWEB)

Smith-Perera, Aida [Universidad Metropolitana de Caracas, Departamento de Gestion Tecnologica, Caracas 1071, Edo Miranda (Venezuela); Garcia-Melon, Monica; Poveda-Bautista, Rocio; Pastor-Ferrando, Juan-Pascual [Universidad Politecnica de Valencia, Departamento de Proyectos de Ingenieria, Camino de vera s/n 46022 Valencia (Spain)

2010-08-15

In this paper a new approach to prioritize project portfolio in an efficient and reliable way is presented. It is based on strategic objectives of the company and multicriteria decision methods. The paper introduces a rigorous method with acceptable complexity which seeks to assist managers of a big Electrical Company of Venezuela to distribute the annual budget among the possible improvement actions to be conducted on the electrical network of Caracas. A total of 15 network improvement actions grouped into three clusters according to the strategic objectives of the company have been analyzed using the Project Strategic Index (PSI) proposed. The approach combines the use of the Analytic Network Process (ANP) method with the information obtained from the experts during the decision-making process. The ANP method allows the aggregation of the experts' judgments on each of the indicators used into one Project Strategic Index. In addition, ANP is based on utility ratio functions which are the most appropriate for the analysis of uncertain data, like experts' estimations. Finally, unlike the other multicriteria techniques, ANP allows the decision problem to be modelled using the relationships among dependent criteria. The participating experts coincided in the appreciation that the method proposed in this paper is useful and an improvement from traditional budget distribution techniques. They find the results obtained coherent, the process seems sufficiently rigorous and precise, and the use of resources is significantly less than in other methods. (author)

A Project Strategic Index proposal for portfolio selection in electrical company based on the Analytic Network Process

International Nuclear Information System (INIS)

Smith-Perera, Aida; Garcia-Melon, Monica; Poveda-Bautista, Rocio; Pastor-Ferrando, Juan-Pascual

2010-01-01

In this paper a new approach to prioritize project portfolio in an efficient and reliable way is presented. It is based on strategic objectives of the company and multicriteria decision methods. The paper introduces a rigorous method with acceptable complexity which seeks to assist managers of a big Electrical Company of Venezuela to distribute the annual budget among the possible improvement actions to be conducted on the electrical network of Caracas. A total of 15 network improvement actions grouped into three clusters according to the strategic objectives of the company have been analyzed using the Project Strategic Index (PSI) proposed. The approach combines the use of the Analytic Network Process (ANP) method with the information obtained from the experts during the decision-making process. The ANP method allows the aggregation of the experts' judgments on each of the indicators used into one Project Strategic Index. In addition, ANP is based on utility ratio functions which are the most appropriate for the analysis of uncertain data, like experts' estimations. Finally, unlike the other multicriteria techniques, ANP allows the decision problem to be modelled using the relationships among dependent criteria. The participating experts coincided in the appreciation that the method proposed in this paper is useful and an improvement from traditional budget distribution techniques. They find the results obtained coherent, the process seems sufficiently rigorous and precise, and the use of resources is significantly less than in other methods. (author)

Classical molecular dynamics simulation of electronically non-adiabatic processes.

Science.gov (United States)

Miller, William H; Cotton, Stephen J

2016-12-22

Both classical and quantum mechanics (as well as hybrids thereof, i.e., semiclassical approaches) find widespread use in simulating dynamical processes in molecular systems. For large chemical systems, however, which involve potential energy surfaces (PES) of general/arbitrary form, it is usually the case that only classical molecular dynamics (MD) approaches are feasible, and their use is thus ubiquitous nowadays, at least for chemical processes involving dynamics on a single PES (i.e., within a single Born-Oppenheimer electronic state). This paper reviews recent developments in an approach which extends standard classical MD methods to the treatment of electronically non-adiabatic processes, i.e., those that involve transitions between different electronic states. The approach treats nuclear and electronic degrees of freedom (DOF) equivalently (i.e., by classical mechanics, thereby retaining the simplicity of standard MD), and provides "quantization" of the electronic states through a symmetrical quasi-classical (SQC) windowing model. The approach is seen to be capable of treating extreme regimes of strong and weak coupling between the electronic states, as well as accurately describing coherence effects in the electronic DOF (including the de-coherence of such effects caused by coupling to the nuclear DOF). A survey of recent applications is presented to illustrate the performance of the approach. Also described is a newly developed variation on the original SQC model (found universally superior to the original) and a general extension of the SQC model to obtain the full electronic density matrix (at no additional cost/complexity).

Food processing using electrons and X-rays

International Nuclear Information System (INIS)

Clouston, J.G.

1985-01-01

The ionizing radiation which will be used as process energy for the preservation of food, will be limited to high energy electrons (less than 10 MeV), X-rays (less than 5 MeV) and gamma rays emitted by cobalt-60 (1.17;1.33 MeV) and cesium -137 (0.663 MeV). When a foodstuff is irradiated with any of these radiations absorption of the radiant energy will initiate a variety of reactions between its atomic and molecular constituents causing permanent chemical, physical and biological changes. This paper focusses on radiation processing using electron or X-ray generators in the range 2 to 10 MeV

Significance of fundamental processes of radiation chemistry in hot atom chemical processes: electron thermalization

International Nuclear Information System (INIS)

Nishikawa, M.

1984-01-01

The author briefly reviews the current understanding of the course of electron thermalization. An outline is given of the physical picture without going into mathematical details. The analogy of electron thermalization with hot atom processes is taken as guiding principle in this paper. Content: secondary electrons (generation, track structure, yields); thermalization (mechanism, time, spatial distribution); behaviour of hot electrons. (Auth.)

Understanding the Perception of Very Small Software Companies towards the Adoption of Process Standards

Science.gov (United States)

Basri, Shuib; O'Connor, Rory V.

This paper is concerned with understanding the issues that affect the adoption of software process standards by Very Small Entities (VSEs), their needs from process standards and their willingness to engage with the new ISO/IEC 29110 standard in particular. In order to achieve this goal, a series of industry data collection studies were undertaken with a collection of VSEs. A twin track approach of a qualitative data collection (interviews and focus groups) and quantitative data collection (questionnaire) were undertaken. Data analysis was being completed separately and the final results were merged, using the coding mechanisms of grounded theory. This paper serves as a roadmap for both researchers wishing to understand the issues of process standards adoption by very small companies and also for the software process standards community.

THE ROLE OF INTERNET IN THE BORN GLOBAL COMPANIES

Directory of Open Access Journals (Sweden)

Marcus Vinicius de Oliveira Brasil

2013-06-01

Full Text Available The process of internationalization of global companies occurs connected to the high integration through the nets of computers, especially the Internet. The technological advances have revolutionized the forms of transacting products and services. Innovation becomes the key word for this new phase established in the economy by the computer science in which the Internet is able to establish a larger integration among the enterprises, consumers and suppliers. How can the Internet contribute to the process of Internationalization of Born Globals? This theoretical paper aims to discuss the role of innovations with internet in Born Globals firms to the process of internationalization. The literature review on the subject shows that the advances of technology will require new studies about the internationalization’s process. In spite of that, the influence of the electronic business has progressed in commercial transactions. The global world requires workers who are more and more prepared to face such reality. The enterprises will have to adapt, otherwise they may fail to reduce costs and to improve their logistics. The consumers can have personalized products, while their needs are met in a more comfortable, immediate way and with less intermediates. The electronic markets revolutionize the economy by meeting old needs in a more modern and practical way.

Factors Influencing Company Relations with Market Stakeholders, in the Face of Crises in Company Development

Directory of Open Access Journals (Sweden)

Olszewska Barbara

2014-06-01

Full Text Available Crises in company development are a particular subset of management crises. They emerge on various stages of company development, as a result of gradual depletion of effective management solutions. Crisis situations in companies have varied impact on company stakeholders. The paper presents results of empirical studies of factors influencing company relations with market stakeholders and those that facilitate the process of restoring and maintaining any relations that suffered in the course of crises in company development. The authors’ intention was to identify such factors and evaluate their importance, in relation to various stages of company development and the associated types of crisis situations faced by companies. Empirical studies suggest that certain factors may facilitate conflict resolution in matters concerning company relations with market stakeholders, and that the impact of these factors varies depending on the phase of organizational development and the type of the associated crisis situation. It must be noted, that one of the most important factors to influence problem resolution is the perceived honesty of the exchange participants. Moreover, research suggests that opinions on the significance of organizational dependence of exchange participants in the resolution of problems in relations with market stakeholders are varied.

On-line monitoring of food fermentation processes using electronic noses and electronic tongues: A review

International Nuclear Information System (INIS)

Peris, Miguel; Escuder-Gilabert, Laura

2013-01-01

Graphical abstract: -- Highlights: •This review paper deals with the applications of electronic noses and electronic tongues to the monitoring of fermentation processes. •Positive and negative aspects of the different approaches reviewed are analyzed. •Current and future endeavors in this field are also commented. -- Abstract: Fermentation processes are often sensitive to even slight changes of conditions that may result in unacceptable end-product quality. Thus, close follow-up of this type of processes is critical for detecting unfavorable deviations as early as possible in order to save downtime, materials and resources. Nevertheless the use of traditional analytical techniques is often hindered by the need for expensive instrumentation and experienced operators and complex sample preparation. In this sense, one of the most promising ways of developing rapid and relatively inexpensive methods for quality control in fermentation processes is the use of chemical multisensor systems. In this work we present an overview of the most important contributions dealing with the monitoring of fermentation processes using electronic noses and electronic tongues. After a brief description of the fundamentals of both types of devices, the different approaches are critically commented, their strengths and weaknesses being highlighted. Finally, future trends in this field are also mentioned in the last section of the article

On-line monitoring of food fermentation processes using electronic noses and electronic tongues: A review

Energy Technology Data Exchange (ETDEWEB)

Peris, Miguel, E-mail: mperist@qim.upv.es [Departamento de Química, Universidad Politécnica de Valencia, 46071 Valencia (Spain); Escuder-Gilabert, Laura [Departamento de Química Analítica, Universitat de Valencia, C/ Vicente Andrés Estellés s/n, E-46100 Burjasot, Valencia (Spain)

2013-12-04

Graphical abstract: -- Highlights: •This review paper deals with the applications of electronic noses and electronic tongues to the monitoring of fermentation processes. •Positive and negative aspects of the different approaches reviewed are analyzed. •Current and future endeavors in this field are also commented. -- Abstract: Fermentation processes are often sensitive to even slight changes of conditions that may result in unacceptable end-product quality. Thus, close follow-up of this type of processes is critical for detecting unfavorable deviations as early as possible in order to save downtime, materials and resources. Nevertheless the use of traditional analytical techniques is often hindered by the need for expensive instrumentation and experienced operators and complex sample preparation. In this sense, one of the most promising ways of developing rapid and relatively inexpensive methods for quality control in fermentation processes is the use of chemical multisensor systems. In this work we present an overview of the most important contributions dealing with the monitoring of fermentation processes using electronic noses and electronic tongues. After a brief description of the fundamentals of both types of devices, the different approaches are critically commented, their strengths and weaknesses being highlighted. Finally, future trends in this field are also mentioned in the last section of the article.

Process mining for electronic data interchange

NARCIS (Netherlands)

Engel, R.; Krathu, W.; Zapletal, M.; Pichler, C.; Aalst, van der W.M.P.; Werthner, H.; Huemer, C.; Setzer, T.

2011-01-01

Choreography modeling and service integration received a lot of attention in the last decade. However, most real-world implementations of inter-organizational systems are still realized by traditional Electronic Data Interchange (EDI) standards. In traditional EDI standards, the notion of process or

Global Account Management for Sales Organization in Multinational Companies

OpenAIRE

Canegrati, Tino

2009-01-01

A Global Company is not just a Multinational Company, but on top it has developed an organizational structure, an overall governance and a set of operational decision making processes which allow running a significant percentage of business processes as a unique body across borders. Successful Global Companies have a clear setup and governance of local versus centralized decision making processes, as well as budget ownership. Corporations focused on global opportunities need to re-think their...

KNOWLEDGE IN LEARNING COMPANIES

Directory of Open Access Journals (Sweden)

Alexandrina Cristina VASILE

2016-05-01

Full Text Available Changes are the only constant value in the current unpredictable economy. Under these circumstances leaders and employees must manage the external and internal environment and bring profitability for their companies. This paper gives an introductory approach to different perspective over learning companies in international literature. Different theoretical aspects, models and theories are taken into account for having a higher visibility to the complex concept of learning companies from leadership side to multiculturalism as the firm profitability should be the final goal of each economic system. The article concludes that not the process of learning is important but the adaptability to every different environment must be seen as vital.

Statistical process control for electron beam monitoring.

Science.gov (United States)

López-Tarjuelo, Juan; Luquero-Llopis, Naika; García-Mollá, Rafael; Quirós-Higueras, Juan David; Bouché-Babiloni, Ana; Juan-Senabre, Xavier Jordi; de Marco-Blancas, Noelia; Ferrer-Albiach, Carlos; Santos-Serra, Agustín

2015-07-01

To assess the electron beam monitoring statistical process control (SPC) in linear accelerator (linac) daily quality control. We present a long-term record of our measurements and evaluate which SPC-led conditions are feasible for maintaining control. We retrieved our linac beam calibration, symmetry, and flatness daily records for all electron beam energies from January 2008 to December 2013, and retrospectively studied how SPC could have been applied and which of its features could be used in the future. A set of adjustment interventions designed to maintain these parameters under control was also simulated. All phase I data was under control. The dose plots were characterized by rising trends followed by steep drops caused by our attempts to re-center the linac beam calibration. Where flatness and symmetry trends were detected they were less-well defined. The process capability ratios ranged from 1.6 to 9.3 at a 2% specification level. Simulated interventions ranged from 2% to 34% of the total number of measurement sessions. We also noted that if prospective SPC had been applied it would have met quality control specifications. SPC can be used to assess the inherent variability of our electron beam monitoring system. It can also indicate whether a process is capable of maintaining electron parameters under control with respect to established specifications by using a daily checking device, but this is not practical unless a method to establish direct feedback from the device to the linac can be devised. Copyright © 2015 Associazione Italiana di Fisica Medica. Published by Elsevier Ltd. All rights reserved.

The multiple market-exposure of waste management companies: A case study of two Swedish municipally owned companies

Energy Technology Data Exchange (ETDEWEB)

Corvellec, Herve, E-mail: herve.corvellec@ism.lu.se [Department of Service Management, Lund University, Campus Helsingborg, PO Box 882, SE-251 08 Helsingborg (Sweden); Bramryd, Torleif [Department of Environmental Strategy, Lund University, Campus Helsingborg, PO Box 882, SE-251 08 Helsingborg (Sweden)

2012-09-15

Highlights: Black-Right-Pointing-Pointer Swedish municipally owned waste management companies are active on political, material, technical, and commercial markets. Black-Right-Pointing-Pointer These markets differ in kind and their demands follow different logics. Black-Right-Pointing-Pointer These markets affect the public service, processing, and marketing of Swedish waste management. Black-Right-Pointing-Pointer Articulating these markets is a strategic challenge for Swedish municipally owned waste management. - Abstract: This paper describes how the business model of two leading Swedish municipally owned solid waste management companies exposes them to four different but related markets: a political market in which their legitimacy as an organization is determined; a waste-as-material market that determines their access to waste as a process input; a technical market in which these companies choose what waste processing technique to use; and a commercial market in which they market their products. Each of these markets has a logic of its own. Managing these logics and articulating the interrelationships between these markets is a key strategic challenge for these companies.

Positron-Electron Annihilation Process in (2,2)-Difluoropropane Molecule

Science.gov (United States)

Liu, Yang; Ma, Xiao-Guang; Zhu, Ying-Hao

2016-04-01

The positron-electron annihilation process in (2,2)-difluoropropane molecule and the corresponding gamma-ray spectra are studied by quantum chemistry method. The positrophilic electrons in (2,2)-difluoropropane molecule are found for the first time. The theoretical predictions show that the outermost 2s electrons of fluoride atoms play an important role in positron-electron annihilation process of (2,2)-difiuoropropane. In the present scheme, the correlation coefficient between the theoretical gamma-ray spectra and the experiments can be 99%. The present study gives an alternative annihilation model for positron-electron pair in larger molecules. Supported by the National Natural Science Foundation of China under Grant No. 11347011 and the Natural Science Foundation Project of Shandong Province under Grant No. ZR2011AM010 and 2014 Technology Innovation Fund of Ludong University under Grant Nos. 1d151007 and ld15l016

Quality control of the documentation process in electronic economic activities

Directory of Open Access Journals (Sweden)

Krutova A.S.

2017-06-01

Full Text Available It is proved that the main tool that will provide adequate information resources e economic activities of social and economic relations are documenting quality control processes as the basis of global information space. Directions problems as formation evaluation information resources in the process of documentation, namely development tools assess the efficiency of the system components – qualitative assessment; development of mathematical modeling tools – quantitative evaluation. A qualitative assessment of electronic documentation of economic activity through exercise performance, efficiency of communication; document management efficiency; effectiveness of flow control operations; relationship management effectiveness. The concept of quality control process documents electronically economic activity to components which include: the level of workflow; forms adequacy of information; consumer quality documents; quality attributes; type of income data; condition monitoring systems; organizational level process documentation; attributes of quality, performance quality consumer; type of management system; type of income data; condition monitoring systems. Grounded components of the control system electronic document subjects of economic activity. Detected components IT-audit management system economic activity: compliance audit; audit of internal control; detailed multilevel analysis; corporate risk assessment methodology. The stages and methods of processing electronic transactions economic activity during condition monitoring of electronic economic activity.

Large scale oil lease automation and electronic custody transfer

International Nuclear Information System (INIS)

Price, C.R.; Elmer, D.C.

1995-01-01

Typically, oil field production operations have only been automated at fields with long term production profiles and enhanced recovery. The automation generally consists of monitoring and control at the wellhead and centralized facilities. However, Union Pacific Resources Co. (UPRC) has successfully implemented a large scale automation program for rapid-decline primary recovery Austin Chalk wells where purchasers buy and transport oil from each individual wellsite. This project has resulted in two significant benefits. First, operators are using the system to re-engineer their work processes. Second, an inter-company team created a new electronic custody transfer method. This paper will describe: the progression of the company's automation objectives in the area; the field operator's interaction with the system, and the related benefits; the research and development of the new electronic custody transfer method

Expatriation on the strategy of internationalized companies

Directory of Open Access Journals (Sweden)

Shalimar Gallon

2014-12-01

Full Text Available This paper analyses the strategic role of the expatriation in the internationalization of the company. Expatriation should be minded as the result of a broader organizational strategy, representing one of the ways to articulate international and local strategies. A case study made on the Alpha Company has been presented in which 21 interviews were performed with professionals of the area and expatriates/repatriates. Alpha company has very emphasis in the world scenario and has a expatriation program of 12 years, nevertheless, has a lack of polices and more structured practices, due to its internationalization has been taken a larger dimension as the company was ready to deal with. It is pointed, however, that the same process have permitted several growing possibilities for professionals and the company as has presented many challenges to be overcome, like enhancement of the process training, repatriation planning, valorization and retention of the repatriate

Computalog; no resting on laurels for this company

International Nuclear Information System (INIS)

Jaremko, G.

1997-01-01

Computalog, one of the Canadian oilfield service sector's strongest survivors, is celebrating its 25th anniversary in 1997. In an interview with 'Oilweek' the company's president confidently predicted that in the not-too-distant future, the company will derive at least half of its revenues from foreign sources. Considerable progress has already been made towards this goal: in 1996 some 30 per cent of revenues have been derived from operations in the United States, Russia, India, China, Argentina and Venezuela. Currently, the company has 1023 employees (80 in Calgary), and dominates the Canadian market for 'wireline services' of recording or logging features of wells with increasingly elaborate, computerized electronic instruments. In addition to its core business, the company is active in directional and horizontal drilling, product sales, manufacturing, and research and development. Although majority Canadian-owned, and perceived to be a primarily Canadian company, its current goal is to gain greater exposure on the global market and to have a larger following on Wall Street

Soft electron processor for surface sterilization of food material

International Nuclear Information System (INIS)

Baba, Takashi; Kaneko, Hiromi; Taniguchi, Shuichi

2004-01-01

As frozen or chilled foods have become popular nowadays, it has become very important to provide raw materials with lower level microbial contamination to food processing companies. Consequently, the sterilization of food material is one of the major topics for food processing. Dried materials like grains, beans and spices, etc., are not typically deeply contaminated by microorganisms, which reside on the surfaces of materials, so it is very useful to take low energetic, lower than 300 keV, electrons with small penetration power (Soft-Electrons), as a sterilization method for such materials. Soft-Electrons is researched and named by Dr. Hayashi et al. This is a non-thermal method, so one can keep foods hygienic without serious deterioration. It is also a physical method, so is free from residues of chemicals in foods. Recently, Nissin-High Voltage Co., Ltd. have developed and manufactured equipment for commercial use of Soft-Electrons (Soft Electron Processor), which can process 500 kg/h of grains. This report introduces the Soft Electron Processor and shows the results of sterilization of wheat and brown rice by the equipment

Electronic Processes at Organic−Organic Interfaces: Insight from Modeling and Implications for Opto-electronic Devices †

KAUST Repository

Beljonne, David

2011-02-08

We report on the recent progress achieved in modeling the electronic processes that take place at interfaces between π-conjugated materials in organic opto-electronic devices. First, we provide a critical overview of the current computational techniques used to assess the morphology of organic: organic heterojunctions; we highlight the compromises that are necessary to handle large systems and multiple time scales while preserving the atomistic details required for subsequent computations of the electronic and optical properties. We then review some recent theoretical advances in describing the ground-state electronic structure at heterojunctions between donor and acceptor materials and highlight the role played by charge-transfer and long-range polarization effects. Finally, we discuss the modeling of the excited-state electronic structure at organic:organic interfaces, which is a key aspect in the understanding of the dynamics of photoinduced electron-transfer processes. © 2010 American Chemical Society.

Triboelectric effect: A new perspective on electron transfer process

Science.gov (United States)

Pan, Shuaihang; Zhang, Zhinan

2017-10-01

As interest in the triboelectric effect increases in line with the development of tribo-electrification related devices, the mechanisms involved in this phenomenon require more systematic review from the dual perspectives of developed classical insights and emerging quantum understanding. In this paper, the clear energy changing and transferring process of electrons have been proposed from the quantum point of view as the trigger for the charging initiation process in the triboelectric effect, and the phonon modes on the friction surfaces are believed to hold great importance as one of the main driving forces. Compatible with Maxwell Displacement Current theory, the complete consideration for charging steady state, i.e., the competition mechanisms between the breakdown process and the continuously charging process, and the balance mechanisms of phonon-electron interaction, built voltage, and induced polarization, are illustrated. In brief, the proposed theory emphasizes the fundamental role of electron transferring in tribo-electrical fields. By comparing certain experimental results from the previous studies, the theory is justified.

Performance evaluation of the insurance companies based on AHP

Science.gov (United States)

Lu, Manhong; Zhu, Kunping

2018-04-01

With the entry of foreign capital, China's insurance industry is under increasing pressure of competition. The performance of a company is the external manifestation of its comprehensive strength. Therefore, the establishment of a scientific evaluation system is of practical significance for the insurance companies. In this paper, based on the financial and non-financial indicators of the companies, the performance evaluation system is constructed by means of the analytic hierarchy process (AHP). In the system, the weights of the indicators which represent the impact on the performance of the companies will be calculated by the process. The evaluation system is beneficial for the companies to realize their own strengths and weaknesses, so as to take steps to enhance the core competitiveness of the companies.

IMPACTS OF BOVINE TRACEABILITY IMPLANTATION IN COMPUTERIZED RURAL COMPANIES: CASE STUDIES

Directory of Open Access Journals (Sweden)

Henri Cócaro

2008-02-01

Full Text Available This study looked into evaluating the impacts that the adhesion to the bovine traceability caused in four agricultural companies that adopted or used ITs for tracked herd management. After comparing the case studies it was concluded that the adhesion to traceability caused the adoption of ITs, mainly of the management and traceability system for beef cattle and the electronic scale; the zoo technical changes that happened were, the individual identification of the animals, the control of animal stock and the possibility to determine performance and reproductive indexes; the management changes that happened were the development of new controls by filing the animal identification document (DIA, the documentation of the purchase, use and exit of inputs (nutritional and sanitarian, and the documentation of animal movements. It was not verified the return of managerial or zoo technical information by SISBOV that aided the companies in their decision-taking process.

Smart Grid Innovation Management for SME Electricity Companies

DEFF Research Database (Denmark)

Tambo, Torben

2011-01-01

innovation process lies ahead for utility companies in screening, testing, maturing, implementing and operating smart grids. This process is expected to follow the political targets for CO2 reduction stretching forward until 2050. As no proven concepts exists, and as the process is expected to progress many...... years ahead, smart grid represents an excellent case of continuous innovation. The current study use a series of loosely related technological studies of smart grid related technologies in SME electricity companies to highlight critical issues in this innovation process. Major findings...... are that the companies have limited innovation capabilities, they are presented with plenty of technological offerings that eventually have to be rejected, and they suffer from absence of clear objectives....

Performance evaluation of Central European companies

Directory of Open Access Journals (Sweden)

Petr Fiala

2015-10-01

Full Text Available The paper presents a modelling approach for performance comparison of Central European companies on three levels: country, industry, and company. The approach is based on Data Envelopment Analysis and Analytic Hierarchy Process. The proposed model consists of two basic sections. The first section estimates the importance of selected industries in the countries, whereas the second section evaluates the performance of companies within industries. The results of both sections are synthesized and finally the country performance is estimated. The evaluation is based on the data set resulting from a survey of companies from selected industries.

DESIGN OF EXPERIMENTS IN TRUCK COMPANY

Directory of Open Access Journals (Sweden)

Bibiana Kaselyova

2015-07-01

Full Text Available Purpose: Design of experiment (DOE represent very powerful tool for process improvement vastly supported by six sigma methodology. This approach is mostly used by large and manufacturing orientated companies. Presented research is focused on use of DOE in truck company, which is medium size and service orientated. Such study has several purposes. Firstly, detailed description of improvement effort based on DOE can be used as a methodological framework for companies similar to researched one. Secondly, it provides example of successfully implemented low cost design of experiment practise. Moreover, performed experiment identifies key factors, which influence the lifetime of truck tyres.Design/methodology: The research in this paper is based on experiment conducted in Slovakian Truck Company. It provides detailed case study of whole improvement effort, together with problem formulation, design creation and analysis, as well as the results interpretation. The company wants to improve lifetime of the truck tyres. Next to fuel consumption, consumption of tyres and their replacement represent according to them, one of most costly processes in company. Improvement effort was made through the use of PDCA cycle. It start with analysis of current state of tyres consumption. The variability of tyres consumption based on years and types was investigated. Then the causes of tyres replacement were identified and screening DOE was conducted. After a screening design, the full factorial design of experiment was used to identify main drivers of tyres deterioration and breakdowns. Based on result of DOE, the corrective action were propose and implement.Findings: Based on performed experiment our research describes process of tyres use and replacement. It defines main reasons for tyre breakdown and identify main drivers which influence truck tyres lifetime. Moreover it formulates corrective action to prolong tyres lifetime.Originality: The study represents full

Electronic Versus Manual Data Processing: Evaluating the Use of Electronic Health Records in Out-of-Hospital Clinical Research

Science.gov (United States)

Newgard, Craig D.; Zive, Dana; Jui, Jonathan; Weathers, Cody; Daya, Mohamud

2011-01-01

Objectives To compare case ascertainment, agreement, validity, and missing values for clinical research data obtained, processed, and linked electronically from electronic health records (EHR), compared to “manual” data processing and record abstraction in a cohort of out-ofhospital trauma patients. Methods This was a secondary analysis of two sets of data collected for a prospective, population-based, out-of-hospital trauma cohort evaluated by 10 emergency medical services (EMS) agencies transporting to 16 hospitals, from January 1, 2006 through October 2, 2007. Eighteen clinical, operational, procedural, and outcome variables were collected and processed separately and independently using two parallel data processing strategies, by personnel blinded to patients in the other group. The electronic approach included electronic health record data exports from EMS agencies, reformatting and probabilistic linkage to outcomes from local trauma registries and state discharge databases. The manual data processing approach included chart matching, data abstraction, and data entry by a trained abstractor. Descriptive statistics, measures of agreement, and validity were used to compare the two approaches to data processing. Results During the 21-month period, 418 patients underwent both data processing methods and formed the primary cohort. Agreement was good to excellent (kappa 0.76 to 0.97; intraclass correlation coefficient 0.49 to 0.97), with exact agreement in 67% to 99% of cases, and a median difference of zero for all continuous and ordinal variables. The proportions of missing out-of-hospital values were similar between the two approaches, although electronic processing generated more missing outcomes (87 out of 418, 21%, 95% CI = 17% to 25%) than the manual approach (11 out of 418, 3%, 95% CI = 1% to 5%). Case ascertainment of eligible injured patients was greater using electronic methods (n = 3,008) compared to manual methods (n = 629). Conclusions In this

The Payout Decision-Making Process of Brazilian Listed Companies: A CFO Survey

Directory of Open Access Journals (Sweden)

Roberto Frota Decourt

2012-12-01

Full Text Available The purpose of this paper is to present the results of a survey with Brazilian listed companies CFOs` trying to identify how these companies determine and manage their payout policy. It was identified that the final decision about dividends is taken by the board of directors, taking into consideration a management proposal sent to them before. Main factors analyzed are net profit and cash generation during immediate previous period. The managers mainly consider interest on own capital (JSCP and dividends as instruments for payout policy. They believe that share repurchase is advantageous to shareholders; however, it is viewed more as an investment decision by the company than a dividend policy. The interest on own capital is broadly used because it provides a fiscal benefit to the company. It seems that management compensation policy affects dividends payout. This suggests an agency conflict between managers and shareholders.

75 FR 70224 - New York Tidal Energy Company; Notice Concluding Pre-Filing Process and Approving Process Plan...

Science.gov (United States)

2010-11-17

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Project No. 12665-003] New York Tidal... Tidal Energy Company. e. Name of Project: East River Tidal Energy Pilot Project. f. Location: In the...-6405. i. FERC Contact: Timothy Konnert (202) 502-6359. j. New York Tidal Energy Company (NYTEC) has...

Models and standards for production systems integration: Technological process and documents

Directory of Open Access Journals (Sweden)

Lečić Danica

2005-01-01

Full Text Available Electronic business demands from production companies to collaborate with customers, suppliers and end users and start electronic manufacturing. To achieve this goal companies have to integrate their subsystems (Application to Application-A2A and they have to collaborate with their business partners (Business to Business - B2B. For this purpose models and unique standards for integration are necessary. In this paper, ebXML and OAGI specifications have been used to present metamodel process by UML class diagram and standardized model of document Working Order for technological process in the form of OAGI BOD XML document. Based on it, from an example, model of technological process is presented by activity diagram (DA in XML form and an appearance of document Working Order. Just as well, rules of transformation DA to XML are presented.

Understanding Organizational Crisis Management Processes : an analytical framework drawn from a case study in a public company

OpenAIRE

Gand , Sébastien; Acquier , Aurélien; Szpirglas , Mathias

2005-01-01

International audience; This article investigates a case of crisis management in a French public company. Combining stakeholder management and a knowledge-based perspective, we propose an analytical framework of organizational crisis management processes. We will first show how the crisis can be analyzed as a collapse of existing frames of collective action, and then present the crisis management processes in details. Our analytical framework leads us to distinguish two kinds of actors who pl...

Electronic Handbooks Simplify Process Management

Science.gov (United States)

2012-01-01

Getting a multitude of people to work together to manage processes across many organizations for example, flight projects, research, technologies, or data centers and others is not an easy task. Just ask Dr. Barry E. Jacobs, a research computer scientist at Goddard Space Flight Center. He helped NASA develop a process management solution that provided documenting tools for process developers and participants to help them quickly learn, adapt, test, and teach their views. Some of these tools included editable files for subprocess descriptions, document descriptions, role guidelines, manager worksheets, and references. First utilized for NASA's Headquarters Directives Management process, the approach led to the invention of a concept called the Electronic Handbook (EHB). This EHB concept was successfully applied to NASA's Small Business Innovation Research (SBIR) and Small Business Technology Transfer (STTR) programs, among other NASA programs. Several Federal agencies showed interest in the concept, so Jacobs and his team visited these agencies to show them how their specific processes could be managed by the methodology, as well as to create mockup versions of the EHBs.

Environmental Monitoring in the Small Business: A Case Study on this Process in a Company of the Real Estate Sector

Directory of Open Access Journals (Sweden)

Mariana Bassi Sutter

2013-12-01

Full Text Available It is observed a gap in the literature regard to studies related to strategic planning in small businesses, specifically related to environmental monitoring. As a result of this gap, this study aimed to understand how a small real estate company monitors the environment in which it operates. To develop the study, we opted for a descriptive and qualitative approach, based on the method of a single case study. The conceptual foundations used for structuring the field research took into account a secondary data survey on strategic planning, environmental analysis in strategic planning, conceptualization of small and medium sized business (SMB and environment monitoring in SMB’s The study also has shown that although the respondents assert they perform environmental monitoring consistently, the process as described in the literature is not formal and systematic in the company studied. It has been observed efforts of the partners in this direction, but such activities are still restricted to the owners of the company. Given the proposed objective of this research, the case study did outline the main characteristics of the monitoring process of a small company in the construction sector. The study therefore contributes to broaden the knowledge about the structure of environmental monitoring in small businesses, enriching the theme that is still underdeveloped. In the business context, this study contributes pointing out factors that could be better developed by company managers and may serve as an example for other small businesses that are in the early stages of its environmental monitoring system development.

Electron beam flue gas treatment process. Review

International Nuclear Information System (INIS)

Honkonen, V.A.

1996-01-01

The basis of the process for electron beam flue gas treatment are presented in the report. In tabular form the history of the research is reviewed. Main dependences of SO 2 and NO x removal efficiencies on different physico-chemical parameters are discussed. Trends concerning industrial process implementation are presented in the paper,finally. (author). 74 refs, 11 figs, 1 tab

Adhesives technology for electronic applications materials, processing, reliability

CERN Document Server

Licari, James J

2011-01-01

Adhesives are widely used in the manufacture and assembly of electronic circuits and products. Generally, electronics design engineers and manufacturing engineers are not well versed in adhesives, while adhesion chemists have a limited knowledge of electronics. This book bridges these knowledge gaps and is useful to both groups. The book includes chapters covering types of adhesive, the chemistry on which they are based, and their properties, applications, processes, specifications, and reliability. Coverage of toxicity, environmental impacts and the regulatory framework make this book par

Crystallographic data processing for free-electron laser sources

International Nuclear Information System (INIS)

White, Thomas A.; Barty, Anton; Stellato, Francesco; Holton, James M.; Kirian, Richard A.; Zatsepin, Nadia A.; Chapman, Henry N.

2013-01-01

A processing pipeline for diffraction data acquired using the ‘serial crystallography’ methodology with a free-electron laser source is described with reference to the crystallographic analysis suite CrystFEL and the pre-processing program Cheetah. A processing pipeline for diffraction data acquired using the ‘serial crystallography’ methodology with a free-electron laser source is described with reference to the crystallographic analysis suite CrystFEL and the pre-processing program Cheetah. A detailed analysis of the nature and impact of indexing ambiguities is presented. Simulations of the Monte Carlo integration scheme, which accounts for the partially recorded nature of the diffraction intensities, are presented and show that the integration of partial reflections could be made to converge more quickly if the bandwidth of the X-rays were to be increased by a small amount or if a slight convergence angle were introduced into the incident beam

Crystallographic data processing for free-electron laser sources

Energy Technology Data Exchange (ETDEWEB)

White, Thomas A., E-mail: taw@physics.org; Barty, Anton; Stellato, Francesco [DESY, Notkestrasse 85, 22607 Hamburg (Germany); Holton, James M. [University of California, San Francisco, CA 94158 (United States); Lawrence Berkeley National Laboratory, Berkeley, CA 94720 (United States); Kirian, Richard A. [DESY, Notkestrasse 85, 22607 Hamburg (Germany); Arizona State University, Tempe, AZ 85287 (United States); Zatsepin, Nadia A. [Arizona State University, Tempe, AZ 85287 (United States); Chapman, Henry N. [DESY, Notkestrasse 85, 22607 Hamburg (Germany); University of Hamburg, Luruper Chaussee 149, 22761 Hamburg (Germany)

2013-07-01

A processing pipeline for diffraction data acquired using the ‘serial crystallography’ methodology with a free-electron laser source is described with reference to the crystallographic analysis suite CrystFEL and the pre-processing program Cheetah. A processing pipeline for diffraction data acquired using the ‘serial crystallography’ methodology with a free-electron laser source is described with reference to the crystallographic analysis suite CrystFEL and the pre-processing program Cheetah. A detailed analysis of the nature and impact of indexing ambiguities is presented. Simulations of the Monte Carlo integration scheme, which accounts for the partially recorded nature of the diffraction intensities, are presented and show that the integration of partial reflections could be made to converge more quickly if the bandwidth of the X-rays were to be increased by a small amount or if a slight convergence angle were introduced into the incident beam.

Front and backside processed thin film electronic devices

Science.gov (United States)

Yuan, Hao-Chih; Wang, Guogong; Eriksson, Mark A.; Evans, Paul G.; Lagally, Max G.; Ma, Zhenqiang

2010-10-12

This invention provides methods for fabricating thin film electronic devices with both front- and backside processing capabilities. Using these methods, high temperature processing steps may be carried out during both frontside and backside processing. The methods are well-suited for fabricating back-gate and double-gate field effect transistors, double-sided bipolar transistors and 3D integrated circuits.

Indirect processes in electron impact ionization of Kr24+ and Kr25+

International Nuclear Information System (INIS)

Chen, M.H.; Reed, K.J.

1992-09-01

Electron-impact ionization cross sections have been calculated for magnesiumlike Kr 24+ and sodiumlike Kr 25+ . Electron-impact ionization is an important atomic process in hot dense plasmas. It can affect the ionization balance, electron temperature, electron density, and level population in the plasma. In the past decade, theoretical and experimental studies have revealed that indirect processes can make significant contributions to the cross sections for electron impact ionization of positive ions. The most important indirect process is excitation of an inner-shell electron followed by Auger emission. Higher-order processes such as resonant excitation followed by sequential double Auger emission, can also contribute significantly. The contributions of excitation-autoionization and resonant excitation double autoionization (REDA) were included, in addition to the cross sections for direct ionization of a 3s electron. The calculations were carried out using the relativistic distorted wave methods and the multiconfiguration Dirac-Fock model. For Kr 25+ , the total cross section is about 5 times the direct ionization cross section. For the Kr 24+ , the indirect contribution is about 2.5 times the direct ionization cross section. The REDA process produces many strong resonances and contributes about 20% to the average ionization cross section

78 FR 14233 - Electronic Retirement Processing

Science.gov (United States)

2013-03-05

... as the private key, is used to verify the signature. Digitized signature means a graphical image of a... recipients of the electronic document. Smart card means a plastic card, typically the size of a credit card, containing an embedded integrated circuit or ``chip'' that can generate, store, or process data. A smart card...

Fuel buyers guide: company data

International Nuclear Information System (INIS)

Anon.

1991-01-01

Four major listings relating to nuclear fuel services are provided. 1. A fuel buyer's guide listing companies under alphabetical order of country and giving addresses and an indication of the services offered. 2. A fuel buyers guide classifying companies in alphabetical order of the services offered. 3. A fuel and front end facility listing subdivided into companies involved in: uranium ore processing; uranium refining and conversion; enrichment; fuel fabrication; heavy water production; zirconium metal production; and zirconium tube production. 4. A fuel and front end facilities listing giving operators' addresses under alphabetical order of country. (UK)

QUANTITATIVE MEASUREMENT AND ASSESSMENT OF THE EFFECTS OF GLOBALIZATION OF COMPANIES AND MARKETS

Directory of Open Access Journals (Sweden)

N. Kovtun

2015-10-01

Full Text Available The results of improving the author’s methodology linked with the assessment of companies’ and markets’ globalization level were presented in this paper. Based on the analysis of the global companies’ and global markets’ features referred to in scientific literature, the specifications which can be used to determine the globalization level of companies and markets were suggested. In addition, the globalization level of the largest top-ten companies (according to the rating of Forbes Global 2000 Leading Companies in 2015 was identified as well as that of corresponding industry markets: auto and truck manufacturers, major banks, software and programming, large department stores (retailers, telecommunication services, electronics producers, electronics, oil and gas operations.

Materials of the Regional Training Course on Validation and Process Control for Electron Beam Radiation Processing

International Nuclear Information System (INIS)

Kaluska, I.; Gluszewski, W.

2007-01-01

Irradiation with electron beams is used in the polymer industry, food, pharmaceutical and medical device industries for sterilization of surfaces. About 20 lectures presented during the Course were devoted to all aspects of control and validation of low energy electron beam processes. They should help the product manufacturers better understand the application of the ANSI/AAMI/ISO 11137 norm, which defines the requirements and standard practices for validation of the irradiation process and the process controls required during routine processing

The application analysis of high energy electron accelerator in food irradiation processing

International Nuclear Information System (INIS)

Deng Wenmin; Chen Hao; Feng Lei; Zhang Yaqun; Chen Xun; Li Wenjun; Xiang Chengfen; Pei Ying; Wang Zhidong

2012-01-01

Irradiation technology of high energy electron accelerator has been highly concerned in food processing industry with its fast development, especially in the field of food irradiation processing. In this paper, equipment and research situation of high energy electron accelerator were collected, meanwhile, the similarities and differences between high energy electron beam and 60 Co γ-rays were discussed. In order to provide more references of high energy electron beam irradiation, the usages of high energy electron in food irradiation processing was prospected. These information would promote the development of domestic food irradiation industry and give a useful message to irradiation enterprises and researchers. (authors)

Failure of single electron descriptions of molecular orbital collision processes

International Nuclear Information System (INIS)

Elston, S.B.

1978-01-01

Inner-shell excitation occurring in low and moderate (keV range) energy collisions between light atomic and ionic systems is frequently describable in terms of molecular promotion mechanisms, which were extensively explored both theoretically and experimentally. The bulk of such studies have concentrated on processes understandable through the use of single- and independent-electron models. Nonetheless, it is possible to find cases of inner-shell excitation in relatively simple collision systems which involve nearly simultaneous multiple-electron transitions and transitions induced by inherently two-electron interactions. Evidence for these many- and nonindependent-electron phenomena in inner-shell excitation processes and the importance of considering such effects in the interpretation of collisionally induced excitation spectra is discussed. 13 references

Electronic tagging and integrated product intelligence

Science.gov (United States)

Swerdlow, Martin; Weeks, Brian

1996-03-01

The advent of 'intelligent,' electronic data bearing tags is set to revolutionize the way industrial and retail products are identified and tracked throughout their life cycles. The dominant system for unique identification today is the bar code, which is based on printed symbology and regulated by the International Article Numbering Association. Bar codes provide users with significant operational advantages and generate considerable added value to packaging companies, product manufacturers, distributors and retailers, across supply chains in many different sectors, from retailing, to baggage handling and industrial components, e.g., for vehicles or aircraft. Electronic tags offer the potential to: (1) record and store more complex data about the product or any modifications which occur during its life cycle; (2) access (and up-date) stored data in real time in a way which does not involve contact with the product or article; (3) overcome the limitations imposed by systems which rely on line-of-sight access to stored data. Companies are now beginning to consider how electronic data tags can be used, not only to improve the efficiency of their supply chain processes, but also to revolutionize the way they do business. This paper reviews the applications and business opportunities for electronic tags and outlines CEST's strategy for achieving an 'open' standard which will ensure that tags from different vendors can co-exist on an international basis.

Quality Management Systems And Impact From Standardization In Albanian Companies

Directory of Open Access Journals (Sweden)

Ira Zoga Gjika

2015-08-01

Full Text Available The increase of competition in the local and regional markets is forcing companies to provide high quality products and services as well as to continuously improve their activities. The quality management systems and standard implementation in Albanian companies are the at the focus of this paper with the intention to evidence the actual situation and the results achieved from the certification process. The implementation of ISO standard requirements together with the assessment of the benefits deriving from it is a relatively new experience for Albanian companies and slightly developed in our economic literature. Consequently this work follows a combined approach of reviewing the relevant rich literature of the last decades with the empirical survey of some Albanian companies that have chosen ISO certification as an instrument to gain competitive advantage in the market. The analysis of factors that drive companies towards such time consuming costly and managerially- wise committed process is one of main study objectives. It is followed by the assessment of benefits deriving from this process for companies in quantitative and qualitative terms. Comparing the expected advantages from the certification with those actually obtained might assist companies themselves to improve their processes. From the other side this comparison serves as a basis for suggestions and recommendations to other companies that intend to make good use of advantages the ISO certification.

HRD Policymaking in Companies: an interpretation of the differences

NARCIS (Netherlands)

Wognum, Ida

1998-01-01

This exploratory study examines HRD policymaking processes in companies. HRD representatives of companies in three economic sectors with more than five hundred employees were asked to complete a questionnaire. Variables include the HRD policymaking process, strategic choices about the specific field

STRATEGIC MANAGEMENT OF HOTEL COMPANIES: CASE STUDY OF HOTEL COMPANIES IN VOJVODINA (SERBIA

Directory of Open Access Journals (Sweden)

Svetlana VUKOSAV

2014-12-01

Full Text Available Contemporary approaches to the management of the company are focused on achieving long-term success of the company in its complex and changing environment. Company as part of the wider environment, must adapt to the changing environment in order to survive, growing and developing. The task of strategic management is to enable the enterprise in the tourism industry to rationally and promptly react to changes in the environment in which it carries out its business and general activity. The aim of this paper is to determine whether and to what extent the process of the strategic management is being implemented in hotels in Vojvodina(that are changed ownership structure and what is their response to the competitive pressures and opportunities, and demands and needs of consumers Strategic positioning in order to achieve sustainable competitive advantage through product differentiation and segmentation of demand is imperative for success of hotel companies in Vojvodina.

ELECTRONIC BANKING AND ELECTRONIC COMMERCE IN SERBIA

Directory of Open Access Journals (Sweden)

Ivana B. Petrevska

2014-10-01

Full Text Available Nowadays, we may witness to dramatic and visible changes in our life environment. Business ambient for companies is different every day, and it is very hard to predict a direction of future changes. There is an environment characterized by sharp competition and increasing number of competitors, fast technological improvements and highly sophisticated and informed costumers. Technological process influences the humanity strongly, changing the way that people live, work and spend. Electronic commerce and electronic banking has become incontinent, and makes a great part of today's total transactions. There are an increasing number of companies that perform their business that way and make profit. Social networks are proven to be the least expensive way of information exchange, and they are present in almost every part of the world. The globalization has reached the most distant parts of the Earth. Every resistance to new technologies is dangerous and may lead to bankruptcy. Due to the EU expansion, Internet users are to be expected, and prosperity of the e-commerce business models at the same time. In Serbia, electronic commerce is present, but not as developed as in EU countries. E-commerce, however it might be successful throughout the world, it is somewhat slow in its growth in Serbia. The reasons are numerous, and main obstacles are the lack of trust, still limited usage of banking cards, avoiding of e-payments by older population etc. Also, the recent scandals over the misuse of personal data, and e-crime are discouraging factors for the growth of e-trade and ebanking. The younger generations are ever more ready to use e-commerce, since they are open to new technologies and do not have the defensive attitude towards it. E-commerce and e-banking has growing potential even among older population, if the society prevents them from fear and mistrust.

Going Global: Key Insights from Two Mexican Companies

Directory of Open Access Journals (Sweden)

Martha RIVERA

2015-12-01

Full Text Available This paper explores how Mexican companies in different industries have achieved international expansion, while at the same time preserving local elements in executing their strategies. For this initial stage of research, the analysis focuses on two companies: a Grupo Bimbo, the number one company in the bakery industry worldwide and b KidZania, one of the world’s top indoor family entertainment centers. The research methodology is based on in-depth interviews with CEOs and key executives from the two companies done over a period of more than ten years. We have also used secondary data such as press releases and case studies. By contrasting their strategies and comparing them with those of other multinationals like Ford Motor Company and Santander Bank, we identified major issues that we condensed into 10 key insights. Understanding how these companies have struggled and succeeded in gaining international markets can help other companies tailor their own strategies. Our argument is that the typical simplified international expansion process is insufficient when companies need to compete in the global arena. Becoming an MNC implies handling an entire ecosystem: building local presence, establishing joint ventures or alliances with local companies, recruiting local talent, developing new business models, reshaping the value proposition, developing new brands or introducing traditional ones with a local flavor, and understanding the supply chain and routes to market. Therefore, a number of aspects have to be taken into consideration beyond just simply selecting a market. For certain companies in emerging markets, making the decision to grow internationally was not initially in their strategic vision, but economic liberalization in their home country and the threat of being purchased by an MNC from a developed country triggered the decision. There is a learning process in international expansion, and trial and error is common and useful. The

Automatic Identification of Similarities Across Products to Improve the Configuration Process in ETO Companies

DEFF Research Database (Denmark)

Shafiee, Sara; Kristjansdottir, Katrin; Hvam, Lars

2017-01-01

Engineer-To-Order (ETO) companies making complex products face the challenge of delivering highly customised products with high quality, affordable price and a short delivery time. To respond to these challenges, ETO companies strive to increase the commonality between different projects and to r...... in an ETO company to evaluate the application of the framework and the IT system. We retrieved the needed data from the ERP system at the case company and developed the IT system in Microsoft Excel, which is integrated with the PCS....

Multiple electron processes of He and Ne by proton impact

Science.gov (United States)

Terekhin, Pavel Nikolaevich; Montenegro, Pablo; Quinto, Michele; Monti, Juan; Fojon, Omar; Rivarola, Roberto

2016-05-01

A detailed investigation of multiple electron processes (single and multiple ionization, single capture, transfer-ionization) of He and Ne is presented for proton impact at intermediate and high collision energies. Exclusive absolute cross sections for these processes have been obtained by calculation of transition probabilities in the independent electron and independent event models as a function of impact parameter in the framework of the continuum distorted wave-eikonal initial state theory. A binomial analysis is employed to calculate exclusive probabilities. The comparison with available theoretical and experimental results shows that exclusive probabilities are needed for a reliable description of the experimental data. The developed approach can be used for obtaining the input database for modeling multiple electron processes of charged particles passing through the matter.

Food safety management systems performance in African food processing companies: a review of deficiencies and possible improvement strategies

NARCIS (Netherlands)

Kussaga, J.B.; Jacxsens, L.; Tiisekwa, B.P.M.; Luning, P.A.

2014-01-01

This study seeks to provide insight into current deficiencies in food safety management systems (FSMS) in African food-processing companies and to identify possible strategies for improvement so as to contribute to African countries’ efforts to provide safe food to both local and international

Surface modification of the metal plates using continuous electron beam process (CEBP)

International Nuclear Information System (INIS)

Kim, Jisoo; Kim, Jin-Seok; Kang, Eun-Goo; Park, Hyung Wook

2014-01-01

Highlights: • We performed surface modification of SM20C, SUS303, and Al6061 using CEBP. • We analyzed surface properties and microstructure after electron-beam irradiation. • The surface quality was improved after electron-beam irradiation. • The surface hardness for SM20C was increased by ∼50% after CEBP irradiation. - Abstract: The finishing process is an important component of the quality-control procedure for final products in manufacturing applications. In this study, we evaluated the performance of continuous electron-beam process as the final process for finishing SM20C (steel alloy), SUS303 (stainless steel alloy), and Al6061 (aluminum alloy) surfaces both on the initially smooth and rough surfaces. Surface modification of the metals was carried out by varying the feed and frequency of the continuous electron-beam irradiation procedure. The resulting surface roughness was examined with respect to the initial surface roughness of the metals. SM20C and SUS303 experienced an improvement in surface roughness, particularly for initially rough surfaces. Continuous electron-beam process produced craters during the process and the effect of this phenomenon on the resulting surface roughness was relatively large with the initially smooth SM20C and SUS303 alloy surfaces. For Al6061, the continuous electron-beam process was effective at improving its surface roughness even with the initially smooth surface under the optimized conditions of process; this was attributed to its low melting point. Scanning electron microscopy was used to identify metallurgical variation within the thin melted and re-solidification layers of the tested alloys. Changes in the surface contact angle and hardness before and after electron-beam irradiation were also examined

Surface modification of the metal plates using continuous electron beam process (CEBP)

Energy Technology Data Exchange (ETDEWEB)

Kim, Jisoo, E-mail: kimjisu16@unist.ac.kr [School of Mechanical and Advanced Materials Engineering, Ulsan National Institute of Science and Technology, UNIST-gil 50, Eonyang-eup, Ulju-gun, Ulsan Metropolitan City 689-798 (Korea, Republic of); Kim, Jin-Seok, E-mail: totoro22@kitech.re.kr [Korea Institute of Industrial Technology (KITECH), KITECH Cheonan Headquarters 35-3 Hongcheon-ri, Ipjang-myeon, Cheonan-si, Chungcheongnam-do 330-825 (Korea, Republic of); Kang, Eun-Goo, E-mail: egkang@kitech.re.kr [Korea Institute of Industrial Technology (KITECH), KITECH Cheonan Headquarters 35-3 Hongcheon-ri, Ipjang-myeon, Cheonan-si, Chungcheongnam-do 330-825 (Korea, Republic of); Park, Hyung Wook, E-mail: hwpark@unist.ac.kr [School of Mechanical and Advanced Materials Engineering, Ulsan National Institute of Science and Technology, UNIST-gil 50, Eonyang-eup, Ulju-gun, Ulsan Metropolitan City 689-798 (Korea, Republic of)

2014-08-30

Highlights: • We performed surface modification of SM20C, SUS303, and Al6061 using CEBP. • We analyzed surface properties and microstructure after electron-beam irradiation. • The surface quality was improved after electron-beam irradiation. • The surface hardness for SM20C was increased by ∼50% after CEBP irradiation. - Abstract: The finishing process is an important component of the quality-control procedure for final products in manufacturing applications. In this study, we evaluated the performance of continuous electron-beam process as the final process for finishing SM20C (steel alloy), SUS303 (stainless steel alloy), and Al6061 (aluminum alloy) surfaces both on the initially smooth and rough surfaces. Surface modification of the metals was carried out by varying the feed and frequency of the continuous electron-beam irradiation procedure. The resulting surface roughness was examined with respect to the initial surface roughness of the metals. SM20C and SUS303 experienced an improvement in surface roughness, particularly for initially rough surfaces. Continuous electron-beam process produced craters during the process and the effect of this phenomenon on the resulting surface roughness was relatively large with the initially smooth SM20C and SUS303 alloy surfaces. For Al6061, the continuous electron-beam process was effective at improving its surface roughness even with the initially smooth surface under the optimized conditions of process; this was attributed to its low melting point. Scanning electron microscopy was used to identify metallurgical variation within the thin melted and re-solidification layers of the tested alloys. Changes in the surface contact angle and hardness before and after electron-beam irradiation were also examined.

17 CFR 232.313 - Identification of investment company type and series and/or class (or contract).

Science.gov (United States)

2010-04-01

... company type and series and/or class (or contract). 232.313 Section 232.313 Commodity and Securities... FILINGS Preparation of Electronic Submissions § 232.313 Identification of investment company type and... must indicate their investment company type, based on whether the registrant's last effective...

Potential ceramics processing applications with high-energy electron beams

International Nuclear Information System (INIS)

Struve, K.W.; Turman, B.N.

1993-01-01

High-energy, high-current electron beams may offer unique features for processing of ceramics that are not available with any other heat source. These include the capability to instantaneously heat to several centimeters in depth, to preferentially deposit energy in dense, high-z materials, to process at atmospheric pressures in air or other gases, to have large control over heating volume and heating rate, and to have efficient energy conversion. At a recent workshop organized by the authors to explore opportunities for electron beam processing of ceramics, several applications were identified for further development. These were ceramic joining, fabrication of ceramic powders, and surface processing of ceramics. It may be possible to join ceramics by either electron-beam brazing or welding. Brazing with refractory metals might also be feasible. The primary concern for brazing is whether the braze material can wet to the ceramic when rapidly heated by an electron beam. Raw ceramic powders, such as silicon nitride and aluminum nitride, which are difficult to produce by conventional techniques, could possibly be produced by vaporizing metals in a nitrogen atmosphere. Experiments need to be done to verify that the vaporized metal can fully react with the nitrogen. By adjusting beam parameters, high-energy beams can be used to remove surface flaws which are often sites of fracture initiation. They can also be used for surface cleaning. The advantage of electron beams rather than ion beams for this application is that the heat deposition can be graded into the material. The authors will discuss the capabilities of beams from existing machines for these applications and discuss planned experiments

Electronic Processes at Organic−Organic Interfaces: Insight from Modeling and Implications for Opto-electronic Devices †

KAUST Repository

Beljonne, David; Cornil, Jérôme; Muccioli, Luca; Zannoni, Claudio; Brédas, Jean-Luc; Castet, Frédéric

2011-01-01

We report on the recent progress achieved in modeling the electronic processes that take place at interfaces between π-conjugated materials in organic opto-electronic devices. First, we provide a critical overview of the current computational

Impact of electron-electron Coulomb interaction on the high harmonic generation process in graphene

Science.gov (United States)

Avetissian, H. K.; Mkrtchian, G. F.

2018-03-01

Generation of high harmonics in a monolayer graphene initiated by a strong coherent radiation field, taking into account electron-electron Coulomb interaction, is investigated. A microscopic theory describing the nonlinear optical response of graphene is developed. The Coulomb interaction of electrons is treated in the scope of dynamic Hartree-Fock approximation. The closed set of integrodifferential equations for the single-particle density matrix of a graphene quantum structure is solved numerically. The obtained solutions show the significance of many-body Coulomb interaction on the high harmonic generation process in graphene.

Marketing strategy of the selected company

OpenAIRE

Vodstrčilová, Kateřina

2010-01-01

This bachelor thesis deals with the marketing strategy of the company Náš grunt, s.r.o., the operator of the farm food concept Náš grunt. The aim of the thesis is to analyse the marketing strategy of the company and to suggest possible improvements. The theoretical part of the thesis is focused on the marketing, the marketing process, the marketing strategy, the marketing mix and SWOT analysis. The practical part is based on the situation analysis and the marketing strategy of the company Náš...

THE PATH TOWARDS ACHIEVING A LEAN SIX SIGMA COMPANY USING THE EXAMPLE OF THE SHINWON COMPANY IN SERBIA

Directory of Open Access Journals (Sweden)

Srđan Mladenović

2016-08-01

Full Text Available In the last twenty years, many companies have realized that the demands of the global market, including more demanding and receptive customers, have set new standards for production flexibility. Gradual reduction of mass production, characteristic of a large number of companies, has opened space for the introduction of a new system which focuses exclusively on the customer. The customer-oriented system was created with the idea that process optimization would lead to the production of a relatively cheap product, delivered on time and with the best possible quality. Such a system is achieved by applying the Lean Six Sigma concept. The aim of this paper is to identify all of the defects that occur as losses and complicate the process of production in order to achieve the Lean Six Sigma level in the Shinwon Company. The original data from the Shinwon company were identified, collected and analyzed, using the methods and tools of the Lean Six Sigma concept (Process Mapping, 5S audit, Pareto diagram, Ishikawa diagram, Seven basic wastes and SPC analysis, in order to present the effectiveness of the quality management system and to evaluate the possibility of its continuous improvement.

Consumer relationship management systems in an international company

Directory of Open Access Journals (Sweden)

Tomasz Buchwald

2014-08-01

Full Text Available As increase in competitiveness between companies leads to pursuit of new ways to communicate between businesses and customers. In order to keep its position in the market a company continuously looks for new marketing solutions. The answer to these searches can be a CRM system.This paper presents the development of an optimal CRM system for the Astor company, which proceeded in the following stages:  analyst team debate, analysis of needs, definition of system functionality and the choice of solution. It also presents the process of the implementation of the CRM system and highlights the benefits. Such a complex process required cooperation between different departments of the company and changes in management skills. The result was a successful implementation of the system.

Recent advances in electronic nose techniques for monitoring of fermentation process.

Science.gov (United States)

Jiang, Hui; Zhang, Hang; Chen, Quansheng; Mei, Congli; Liu, Guohai

2015-12-01

Microbial fermentation process is often sensitive to even slight changes of conditions that may result in unacceptable end-product quality. Thus, the monitoring of the process is critical for discovering unfavorable deviations as early as possible and taking the appropriate measures. However, the use of traditional analytical techniques is often time-consuming and labor-intensive. In this sense, the most effective way of developing rapid, accurate and relatively economical method for quality assurance in microbial fermentation process is the use of novel chemical sensor systems. Electronic nose techniques have particular advantages in non-invasive monitoring of microbial fermentation process. Therefore, in this review, we present an overview of the most important contributions dealing with the quality control in microbial fermentation process using the electronic nose techniques. After a brief description of the fundamentals of the sensor techniques, some examples of potential applications of electronic nose techniques monitoring are provided, including the implementation of control strategies and the combination with other monitoring tools (i.e. sensor fusion). Finally, on the basis of the review, the electronic nose techniques are critically commented, and its strengths and weaknesses being highlighted. In addition, on the basis of the observed trends, we also propose the technical challenges and future outlook for the electronic nose techniques.

Energy management via Internet. Process control system helps companies save energy; Energiemanagement via Internet. Prozessleitsystem hilft Unternehmen Energie sparen

Energy Technology Data Exchange (ETDEWEB)

Anon.

2009-02-15

In view of constantly rising oil and natural gas prices and the demand for environmentally compatible production processes, efficient use of energy is a decisive factor governing the productivity of an industrial company, now more than ever. (orig.)

Companies investments on Private Equity/Venture Capital market

Directory of Open Access Journals (Sweden)

Zbigniew Drewniak

2009-12-01

Full Text Available One of the investors on Private Equity/Venture Capital market are corporations. The share of companies in total funds raised by PE/VC funds is still on the very low level. Beside indirect investments, companies invest directly, creating special entities in one corporate structure. Capital gains are one of the advantages of these investments for companies. However, the companies have also other purposes like the acquirement and the development of new technologies, as well as the transfer of knowledge. The participation of PE/VC fund in the investment process results in the support for company expansion and the creation of company value.

The advantages of a standardized linguistic reference set in managing the company's knowledge and know-how

International Nuclear Information System (INIS)

Penot, N.; Abemonti, F.; Cayzergues, P.; Pinoche, M.; Talou, C.; Levesque, L.

1997-01-01

The company's knowledge and know-how take the concrete form of documents (texts, photographs, video tapes). For purposes of transmission, they must not only be stored, in electronic form today, but also retrieved easily and quickly. To further that end, Gaz de France (GDF) has compiled a bilingual (French, English) thesaurus on the gas industry. The English version was prepared in conjunction with NGTC, Canada's Natural Gas Technologies Center. This thesaurus, comprising descriptors organized according to relationships of genericness, specificity, association and documentary synonymity, is an integral part of the engineers' working enviroment at the NGTC, and GDF. The electronic version facilitates its use by company employees. Constantly available, it is helpful in describing and finding information readily. As a result of studies conducted in this regard: design and maintenance rules have been developed for the thesaurus; the thesaurus has been disseminated to all the engineers in the Company; the thesaurus has been incorporated in the Company's Electronic Document Management system. (au)

Online Company-stakeholder Communication

DEFF Research Database (Denmark)

Eriksen, Rikke Augustinus; Morsing, Mette

Based on a systematic data collection we study one of the first pioneering company-stakeholder communication campaigns in social media: the case of energy company Vattenfall A/S’s pan-European campaign ‘The Climate Manifesto’. Our findings challenge the general assumption, that stakeholder...... lacked between the company and stakeholders. Vattenfall was accused of green-washing, resulting in a communications crisis. Negative stakeholder reactions consisted of prejudiced and non-negotiable argumentation indicating that social media imposes new managerial challenges since communication processes...... technologies and we question to what extent social media serve the enhancement of improved understandings across corporate and civil society on CSR issues. This paper suggests that managers face a risk of the “double-edge of stakeholder communication” when incorporating social media into their CSR strategies...

An overview of the management consulting firms of the Spanish company in China: company profile and success and failure factors

Directory of Open Access Journals (Sweden)

A. Niñerola

2016-03-01

Full Text Available This article explores the vision of Management Consulting Firms (MCF specialized in internationalization processes of Spanish companies in China. The main objective is to shed light on a process full of uncertainty as is international expansion into emerging markets on the point of view of the advisors of that process. First, it is analyzed whether there is a Spanish company profile that is internationalized toward China in terms of sector of activity, size and experience in international business. And second, with their client’s experiences, success and failure factors in the internationalization process are studied. To achieve those objectives in depth interviews were held with partners and managers of six Management Consulting Firms with Spanish clients in their portfolio. As a result it is concluded that the sectors where the Spanish company has invested are several, the size of the company is important to undertake an implementation process in China and its international experience as well. Eight key factors were found relevant to invest in China successfully.  Five factors are related with their resources (humans and financials and the other three are related with their strategy. The main reasons of failure are also discussed. The article provides an outside perspective on the reasons why an internationalization process is successful and other fails.

Production processes of multiply charged ions by electron impact

International Nuclear Information System (INIS)

Oda, Nobuo

1980-02-01

First, are compared the foil or gas stripper and the ion sources utilizing electron-atom ionizing collisions, which are practically used or are under development to produce multiply charged ions. A review is made of the fundamental physical parameters such as successive ionization potentials and various ionization cross sections by electron impact, as well as the primary processes in multiply charged ion production. Multiply charged ion production processes are described for the different existing ion sources such as high temperature plasma type, ion-trapping type and discharge type. (author)

Low energy electron beam processing of YBCO thin films

Energy Technology Data Exchange (ETDEWEB)

Chromik, Š., E-mail: stefan.chromik@savba.sk [Institute of Electrical Engineering, SAS, Dúbravská cesta 9, 841 04 Bratislava (Slovakia); Camerlingo, C. [CNR-SPIN, Istituto Superconduttori, Materiali Innovativi e Dispositivi, via Campi Flegrei 34, 80078 Pozzuoli (Italy); Sojková, M.; Štrbík, V.; Talacko, M. [Institute of Electrical Engineering, SAS, Dúbravská cesta 9, 841 04 Bratislava (Slovakia); Malka, I.; Bar, I.; Bareli, G. [Department of Physics, Ben Gurion University of the Negev, P.O.B. 653, 84105 Beer Sheva (Israel); Jung, G. [Department of Physics, Ben Gurion University of the Negev, P.O.B. 653, 84105 Beer Sheva (Israel); Institute of Physics, Polish Academy of Sciences, Al. Lotników 32/46, 02-668 Warsaw (Poland)

2017-02-15

Highlights: • Improvement of superconducting properties of irradiated bridges under certain conditions. • 30 keV irradiation influence CuO{sub 2} planes as well as oxygen chains. • Direct confirmation of changes in oxygen chains using micro-Raman spectroscopy. • Possibility of electron writing. - Abstract: Effects of low energy 30 keV electron irradiation of superconducting YBa{sub 2}Cu{sub 3}O{sub 7−δ} thin films have been investigated by means of transport and micro-Raman spectroscopy measurements. The critical temperature and the critical current of 200 nm thick films initially increase with increasing fluency of the electron irradiation, reach the maximum at fluency 3 − 4 × 10{sup 20} electrons/cm{sup 2}, and then decrease with further fluency increase. In much thinner films (75 nm), the critical temperature increases while the critical current decreases after low energy electron irradiation with fluencies below 10{sup 20} electrons/cm{sup 2}. The Raman investigations suggest that critical temperature increase in irradiated films is due to healing of broken Cu−O chains that results in increased carrier’s concentration in superconducting CuO{sub 2} planes. Changes in the critical current are controlled by changes in the density of oxygen vacancies acting as effective pinning centers for flux vortices. The effects of low energy electron irradiation of YBCO turned out to result from a subtle balance of many processes involving oxygen removal, both by thermal activation and kick-off processes, and ordering of chains environment by incident electrons.

Web-Gis Solutions Development for Citizens and Water Companies

Science.gov (United States)

Şercăianu, M.

2013-05-01

This paper describes the development of a web-GIS solution in which urban residents, from Buzau City, could be involved in decision-support process of water companies, in order to reduce water losses, by collecting information directly from citizens. In recent years, reducing material and economic losses, recorded in the entire municipal networks management process has become the main focus of public companies in Romania. Due to problems complexity that arise in collecting information from citizens and issues identified in urban areas, more analyzes were required related to web-GIS solutions used in areas such as local government, public utilities, environmental protection or financial management. Another important problem is the poor infrastructure development of spatial databases founded in public companies, and connection to web platforms. Developing the entire communication process between residents and municipal companies has required the use of concept "citizen-sensor" in the entire reporting process. Reported problems are related to water distribution networks with the possibility of covering the entire public utilities infrastructure.

IMPLEMENTATION OF E-CRM IN MACEDONIAN COMPANIES

Directory of Open Access Journals (Sweden)

MARGARITA JANESKA

2016-08-01

Full Text Available Customer Relationship Management (CRM in the digital economy is a challenge for companies that operate in the new electronic environment. In fact, companies that use the internet as basic infrastructure for their operations must adapt and to be ready to respond to the growing challenges who are posed from more sophisticated consumers. CRM concept includes possibilities, methodology and technology that enable companies to operate through improving relations with consumers. CRM as a strategic set of activities begins with a detailed analysis of organizational strategy and ending with measurement of value for stakeholders. CRM owes its expansion to the emergence of the Internet. Digital economy enables more effective targeting and personalization. The basic motive for the research is the fact that e-CRM is a relatively new concept and in recent years has made significant strides in companies around the world aimed at customers. Namely, e-CRM is positioned high on the priority list of today's corporate agendas. The aim of this paper is to consider the importance and benefits of the implementation of e-CRM concept in Macedonia, and to determine the factors that contribute to its successful implementation. The research results should contribute to increasing the profitability and competitiveness of Macedonian companies.

The use of the mass customization process in companies from the construction sector

Directory of Open Access Journals (Sweden)

Diego de Castro Fettermann

2014-11-01

Full Text Available Mass Customization (MC is often used to improve customer service and to reduce operational costs in manufacturing companies, and it can also be applied in low-scale contexts, such as construction. This paper aims to assess how construction companies are implementing MC. We compared a framework of MC found in the literature with three case studies and several improvement opportunities were highlighted. As a result, we could conclude that the MC is being poorly used in the construction business and companies can benefit by increasing the implementation of MC tools and techniques

Industrial applications of electron beam technology

International Nuclear Information System (INIS)

Khairul Zaman Mohd Dahlan

1997-01-01

Electron beam technology was first introduced in Malaysia in 1989 with the conclusion of the bilateral cooperation between the Malaysian Institute for Nuclear Technology Research (MINT) and Japan International Co-operation Agency (JICA) on Radiation Application Projects. Two electron beam accelerators with energy of 3.0 MeV and 200 keV were installed at MINT. These two accelerators pave the way for R and D to be carried out in radiation processing of polymers for cross-linking and surface curing. In 1994, another electron beam accelerator was installed in the private sector for cross-linking of home appliance wires. Since then, two more accelerators were installed in the private sector for cross-linking of heat shrinkable plastic films. Recently, a local company has acquired a low energy electron beam machine for cross-linking of plastic film. Within a period of 7 years, industrial applications of electron beam technology in Malaysia have increased significantly

Knowledge and knowledge bases in the learning process og polish companies

DEFF Research Database (Denmark)

Lorentzen, Anne

2003-01-01

strategies of which are analysed and compared. These strategies have much in common and can be seen as quite successful. Some common problems also exist in relation to mismatches within and between the different knowledge bases. The differences are none the less interesting to consider. They are due......The paper deals with the learning and innovation strategies of manufacturing companies in the economies of transformation. The point of departure is the development of a theoretical framework dealing innovation, knowledge and learning. The case is two manufacturing companies in Poland, the learning...

Signal processing and electronics for nuclear spectrometry. Proceedings of a technical meeting

International Nuclear Information System (INIS)

2009-12-01

The IAEA has responded to Member States needs by implementing programmatic activities that provide interested Member States, particularly those in developing countries, with support to increase, and in some cases establish national and regional capabilities for the proper operation, calibration, maintenance and utilization of instruments in nuclear spectrometry applications. Technological advances in instrumentation, as well as the consequent high rate of obsolescence, make it important for nuclear instrumentation laboratories in Member States to keep their knowledge and skills up to date. This publication reviews the current status, developments and trends in electronics and digital methods for nuclear spectrometry, providing useful information for interested Member States to keep pace with new and evolving technologies. All nuclear spectrometry systems contain electronic circuits and devices, commonly referred to as front-end electronics, which accept and process the electrical signals produced by radiation detectors. This front-end electronics are composed of a chain of signal processing subsystems that filter, amplify, shape, and digitise these electrical signals to finally produce digitally encoded information about the type and nature of the radiation that stimulated the radiation detector. The design objective of front-end electronics is to obtain maximum information about the radiation and with the highest possible accuracy. Historically, the front-end electronics has consisted of all analog components. The performance delivered has increased continually over time through the development and implementation of new and improved analog electronics and electronic designs. The development of digital electronics, programmable logic, and digital signal processing techniques has now enabled most of the analog front-end electronics to be replaced by digital electronics, opening up new opportunities and delivering new benefits not previously achievable. Digital

Characterization of Neutral Radicals from a Dissociative Electron Attachment Process

Science.gov (United States)

Li, Zhou; Milosavljević, Aleksandar R.; Carmichael, Ian; Ptasinska, Sylwia

2017-08-01

Despite decades of gas-phase studies on dissociative electron attachment (DEA) to various molecules, as yet there has been no direct detection and characterization of the neutral radical species produced by this process. In this study, we performed stepwise electron spectroscopy to directly measure and characterize the neutrals produced upon zero-electron-energy DEA to the model molecule, carbon tetrachloride (CCl4 ). We observed the direct yield of the trichloromethyl radical (CCl3. ) formed by DEA to CCl4 and measured the appearance energies of all the other neutral species. By combining these experimental findings with high-level quantum chemical calculations, we performed a complete analysis of both the DEA to CCl4 and the subsequent electron-impact ionization of CCl3. . This work paves the way toward a complete experimental characterization of DEA processes, which will lead to a better understanding of the low-energy electron-induced formation of radical species.

The impact of software growth on the electronics industry

NARCIS (Netherlands)

Genuchten, van M.J.I.M.

2007-01-01

Software growth has significantly impacted the computer industry and is changing many other electronics industries. It is not a question of whether intellectual property will be sold in the form of software, but which companies will do it successfully. The actions electronics companies take today

Role of Marketing Communication in a Company: Lumar Case Study

Directory of Open Access Journals (Sweden)

Sara Kobold

2014-03-01

Full Text Available Marketing communication is an integral part of the famous 4-P. It plays an important role in the company, as it helps to increase company’s visibility and strengthen its brand. Marketing communication is achieving its objectives in communicating with customers and consumers using its marketing communication tools. If a company wants to be ahead of the competition, and have a good look in costumers’ ayes, marketing communication is most crucial. In this paper we analyze the case of marketing communication company Lumar. The results obtained argue that the company is well known, where we recognize especially the electronic media as most important tool of marketing communication. However, we noticed that the brand recognized more regionally – especially in Styria and Carinthia, despite the fact that the company is well known and active in all regions in Slovenia and abroad (Italy, Germany, Austria.

Present state and progress of industrial electron processing systems in Japan

International Nuclear Information System (INIS)

Sakamoto, I.; Mizusawa, K.

1983-01-01

A summary is given of the state of utilisation of electron processing systems in Japan, mainly for (1) cross-linking of wire and cable insulator, (2) heat shrinkable tube and sheet, (3) foamed polyethylene, and (4) curing of paint coats. Details are given of some of the electron processing systems. (U.K.)

IT support of commercial-production companies

International Nuclear Information System (INIS)

Hroch, A.

2004-01-01

Slovak electricity sector was built from sixties like common entity what can use synergic effects. In the 2002 reorganisation was done, there were created independent joint stock company. There were published new legislative acts, which opened Slovak electricity market for competition. The companies have to change their mine because a business is priority No. 1. Slovenske elektrarne, joint-stock company is under transformation process to build procedural guided trade-production company. As joint project is prepared a new system to control business in to a trading floor, including a risk management, which have to be supported by technological and information tools together with planing, scheduling, directing and controlling of the operation. The all system includes standard modules that fulfil their specific functions. (author)

Effective Business Planning : Case Study: Company X

OpenAIRE

Yakovleva, Yulia

2017-01-01

A business planning process plays one of the most important roles in a company. A business plan can either provide stablility and prosperity to a company or drastically worsen its state. Thus, the recommendations for efficient business plans are very useful for companies that have some difficulties with their perfomance. The thesis has a deductive approach, and the qualitative research method was chosen as primary data was collected through desk study and interviews. The secondary data wa...

Use of RFID Technology to Overcome Inefficiencies in the Production Process: an analysis of a Microcomputer Company in Ilhéus – Bahia, Brazil

Directory of Open Access Journals (Sweden)

Frederico Wergne de Castro Araújo Filho

2014-10-01

Full Text Available This paper presents a methodology for the integration of RFID technology into microcomputer assembly companies. Such a technology enables inventory control, tracking of parts/products and customer satisfaction. The methodology was developed to identify and evaluate the production process in an assembly company and to apply the process FMEA to evaluate potential faults and propose improvement actions for the use of RFID technology. The methodology was validated in a company from the Pólo de Informática de Ilhéus/BA. In this study, the viability of RFID technology for inventory control and traceability of the product was confirmed. Among the benefits obtained were the reduction of one of the workers from the inventory team, reduction in the costs of substituting a component, and reduction in lead-time.

75 FR 42432 - Northern Natural Gas Company, Southern Natural Gas Company, Florida Gas Transmission Company, LLC...

Science.gov (United States)

2010-07-21

... Natural Gas Company, Southern Natural Gas Company, Florida Gas Transmission Company, LLC, Transcontinental... abandonment of facilities by Northern Natural Gas Company, Southern Natural Gas Company, Florida Gas... resources, fisheries, and wetlands; Cultural resources; Vegetation and wildlife; Endangered and threatened...

Analysis of companies' environmental strategies for a green society

International Nuclear Information System (INIS)

Sarmento, Manuela; Durao, Diamantino; Duarte, Manuela

2006-01-01

The present research is based on a survey sent to large, medium and small size companies, located in Portugal and within what are considered the most pollutant industrial sectors. The analyses of the results, processed with the Statistical Package for Social Sciences (SPSS) 11.0, show that generally companies are concerned with the implementation of clean processes, green products and eco-equipment to have a cleaner environment, i.e. a more sustainable society. Statistically, the results show that the 98 potential polluting companies are moderately contributing for a green society (x m =3.1) regarding the ten environmental strategies under research. It can also be concluded that, globally, environmental strategies are directly linked to the companies' size. (author)

Cooperation and competition in business on example of Internet research of opto-electronic companies

Science.gov (United States)

Kaliczyńska, Małgorzata

2006-10-01

Based on findings from earlier studies which showed that links to academic web sites contain important information, the following study examines the practicability of using co-link data to describe cooperation and competition in optoelec-tronic business. The analysis was based on 32 companies and organizations which were found in an issue of a specialist magazine. For the purpose of the research three search engines - Google, Yahoo! and MSN Search were used. Assuming that a number of co-links to a pair of Web sites is a measure of the similarity between the two companies, the study aims at search for the sets of companies that would be similar to one another. The method applied is the MDS - multidimensional scaling that allows to present results of the analysis on a 2D map.

People-, Process- and Goal-Focused Leadership Behaviour: An Empirical Study in a Global Company

Directory of Open Access Journals (Sweden)

Thanh Ha-Vikstrom

2017-03-01

Full Text Available This study explores the focus of leadership behaviours that perceived and experienced by leaders in a multinational company. By using triangulation method including questionnaires, in-depth interviews and observations, we analyse the data collected from twenty managers across organisational levels. The results reveal the patterns of managerial behaviour in three key focus areas for success: people, process and goal. Directors and general managers are more people-focused than line managers, who in turn tend to be more process-focused. The research findings bridge the gap in the field and initiate a new normative leadership behaviour model (people-, process and goal-focused, which can be used to directly support leaders in enhancing their leadership skills as well as for recruitment or promotion purposes. The model can be utilized as an aid to organisations when developing training programs to support leaders in different types of organisations (for-profit or non-profit to focus their development efforts on organizational success.

Strategic Management for IT Services on Outsourcing Security Company

Directory of Open Access Journals (Sweden)

Lydia Wijaya

2018-04-01

Full Text Available Information Technology (IT is used by many organizations to enhance competitive advantage, but many outsource security firms have not used IT in their business processes. In this research, we will design Strategic Management for IT Services for outsourcing security company. We use an outsourcing security company as a case study of IT Strategy Management for IT Services development. The purpose of this study is to create an IT services strategy for security outsourcing companies. The framework used is the ITIL (Information Technology Infrastructure Library framework service strategy in strategy management for IT services process. There are several steps taken in the making of the strategy: (a Strategic assessment stage to analyzed internal and external factors of the company. (b Strategy generation by creating the strategic plan. (c Strategy execution to determine the tactical plan. And (d strategy measurement and evaluation. This study produced the proposed IT service system that suits the needs of the company in the form of strategic, tactical plans and strategy measurement. This result can be used as the foundations of IT service development in outsourcing security company. In the process of this study, we work closely with stakeholders; every work product has been verified and validated by stakeholders.

Ford Motor Company - Learning from the Automotive Industry

OpenAIRE

Haas-Kotzegger, Ursula; Schlegelmilch, Bodo B.; Ambos, Björn

2013-01-01

This case study discusses the challenges faced by Ford Motor Company, one of the world's biggest car manufactures. In 2007, after Ford reported one of the worst losses in the company's history, the firm is in the middle of a restructuring process. The "Way Forward Initiative", started by Bill Ford should bring the company back into the fast lane. The case offers background information on the company and its different divisions. It provides the reader with data on the core markets of Ford wi...

Benchmarking in Mobarakeh Steel Company

Directory of Open Access Journals (Sweden)

Sasan Ghasemi

2008-05-01

Full Text Available Benchmarking is considered as one of the most effective ways of improving performance incompanies. Although benchmarking in business organizations is a relatively new concept and practice, ithas rapidly gained acceptance worldwide. This paper introduces the benchmarking project conducted in Esfahan’s Mobarakeh Steel Company, as the first systematic benchmarking project conducted in Iran. It aimsto share the process deployed for the benchmarking project in this company and illustrate how the projectsystematic implementation led to succes.

DISTRIBUTION MANAGEMENT IN COMPANY X

OpenAIRE

Agnieszka Wójcik-Mazur; Karina Wieczorek

2012-01-01

The subject of this publication is the problem of distribution management, exemplified by Company X. The process has been defined by analysing the conditions necessary to satisfy prospects’ needs and create the market position of a business entity. The paper focuses on the basic features of distribution system and the character of distribution channels.The assessment of distribution management has been illustrated with an example of Company X. The subjects of interest are: the dynamics of ord...

Bringing a Finnish Company to the Russian E-Market

OpenAIRE

Veselova, Victoria

2012-01-01

The main objective of the project was to enable a small business case company that is operating in the town of Lappeenranta, Finland, to reach successfully its target segment (Russian consumers) with the help of digital technology in order to increase sales both in its physical shop and in online store. In order to reach the aim of the project and bring Russian consumers and the case company together by the means of electronic marketing, a marketing plan for the promotional campaigns of th...

Supplier Partnership Strategy and Global Competitiveness: A Case of Samsung Electronics

OpenAIRE

Jangwoo Lee; Kapsoo Lee; Junseok Heo

2015-01-01

Samsung Group has accelerated its management innovation process, following the announcement of ‘New Management’ by the CEO Lee Kun-Hee. Particular attention must be paid to the smart-phone business of Samsung Electronics, which is the core company of the Samsung Group. In 2009, as Apple entered into the Korean market, the domestic smart-phone market faced the so called ‘Apple Shock’ due to its choice of a monopolistic and closed operating system. In response, Samsung Electronics introduced th...

Electron beam processing of materials-R and D and industrial utilization

International Nuclear Information System (INIS)

Sarma, K.S.S.

2005-01-01

The early sixties witnessed the beginning of Electron Beam (EB) processing of materials using high-energy electrons and has emerged as a well established technology, presently being adapted by the industry. The process and the processed materials showed definite and distinct advantages/characteristics over the available conventional methods. Even though the commercial exploitation started initially in polymer modifications for better (and suitable) performance through polymerization, cross-linking, degradation and grafting, the processing fields are now diverged to sterilization of health care, food irradiation, controlled defects in semiconductor devices and semi and/or precious stones, waste water/flue gas treatment etc. The availability of electron accelerators that operate as per the requirement of the industrial needs, easy maintenance, expertise availability etc brought the EB processing industry into a multi dollar business world wide. In USA and Japan there are more than 1200 accelerators currently operative in automobile tire, wire and cable and heat shrinkable industry. Output beam powers exceeding 400 kW with electron energy ranging from few hundred keV up to 10 MeV are made available to the industry. In BARC EB processing started with the 2MeV/20 kW electron accelerator and suitable processing techniques have been developed for applications like polymer cross linking (heat resistant LDPE O-rings, wire and cable insulation), color enhancement in precious stones (diamonds) on industrial scale and polymer curing, grafting, degradation on R and D/pilot scale. The commercial success of the process enabled the private cable industry to set up accelerators at their factories. On research and development front, the accelerator is being utilized to develop new polymer blends for high temperature applications, for solid and liquid waste treatment, polypropylene grafting experiments for uranium extraction from sea water, surface curing etc. This paper gives

Material Processing Opportunites Utilizing a Free Electron Laser

Science.gov (United States)

Todd, Alan

1996-11-01

Many properties of photocathode-driven Free Electron Lasers (FEL) are extremely attractive for material processing applications. These include: 1) broad-band tunability across the IR and UV spectra which permits wavelength optimization, depth deposition control and utilization of resonance phenomena; 2) picosecond pulse structure with continuous nanosecond spacing for optimum deposition efficiency and minimal collateral damage; 3) high peak and average radiated power for economic processing in quantity; and 4) high brightness for spatially defined energy deposition and intense energy density in small spots. We discuss five areas: polymer, metal and electronic material processing, micromachining and defense applications; where IR or UV material processing will find application if the economics is favorable. Specific examples in the IR and UV, such as surface texturing of polymers for improved look and feel, and anti-microbial food packaging films, which have been demonstrated using UV excimer lamps and lasers, will be given. Unfortunately, although the process utility is readily proven, the power levels and costs of lamps and lasers do not scale to production margins. However, from these examples, application specific cost targets ranging from 0.1=A2/kJ to 10=A2/kJ of delivered radiation at power levels from 10 kW to 500 kW, have been developed and are used to define strawman FEL processing systems. Since =46EL radiation energy extraction from the generating electron beam is typically a few percent, at these high average power levels, economic considerations dictate the use of a superconducting RF accelerator with energy recovery to minimize cavity and beam dump power loss. Such a 1 kW IR FEL, funded by the US Navy, is presently under construction at the Thomas Jefferson National Accelerator Facility. This dual-use device, scheduled to generate first light in late 1997, will test both the viability of high-power FELs for shipboard self-defense against cruise

The electronic image of the energy. A functional and aesthetical study of the web pages of the companies of energy.

OpenAIRE

Álvarez Ruiz, Antón; Reyes Moreno, María

2011-01-01

This article analyzes the web pages of the major companies in the energy market (electricity and gas) of the more developed countries (EU and North America). The present situation of the market is very significant: For the first time, the Government of these countries have given permission to liberalize the power market. This process goes on very slowly but we can see now some changes that leads to a process of concentration, through acquisitions, merges and commercial agreements between the ...

Trends in the electronic X-ray image formation and processing

International Nuclear Information System (INIS)

Meyer-Ebrecht, D.; Spiesberger, W.

1976-01-01

A report is given on the technological progress in components for the electronic imaging and reproduction in X-ray diagnostics which could enable the partial replacement of radiophotography. Furthermore, electronic post processing methods, in particular in tomography, are reviewed. (ORU) [de

Capability maturity models in engineering companies: case study analysis

Directory of Open Access Journals (Sweden)

Titov Sergei

2016-01-01

Full Text Available In the conditions of the current economic downturn engineering companies in Russia and worldwide are searching for new approaches and frameworks to improve their strategic position, increase the efficiency of the internal business processes and enhance the quality of the final products. Capability maturity models are well-known tools used by many foreign engineering companies to assess the productivity of the processes, to elaborate the program of business process improvement and to prioritize the efforts to optimize the whole company performance. The impact of capability maturity model implementation on cost and time are documented and analyzed in the existing research. However, the potential of maturity models as tools of quality management is less known. The article attempts to analyze the impact of CMM implementation on the quality issues. The research is based on a case study methodology and investigates the real life situation in a Russian engineering company.

The problem of accounting methods in connection to company valuation

Directory of Open Access Journals (Sweden)

Michaela Beranová

2013-01-01

Full Text Available Valuation of a company is not only a calculation but it represents complex set of processes which are mutually interconnected and which are more or less important in the process of company valuation in dependence of the value category inquired. One of these processes is the financial analysis which objective is not only to prove, subsequently the strategic analysis, going concern of a company, but its outcomes are the starting-point of financial plan preparation that is needed in order to apply income-based methods of company valuation. It is generally accepted that results of financial ratios differ in implications of applied accounting methods. The objective of this paper is to frame an influence of accounting methods on the income-based value of a company while the stress is put on the methods of inventory measurement in the context of both, in context of the Czech accounting law as well as of the International Financial Reporting Standards.

75 FR 13524 - Northern Natural Gas Company, Southern Natural Gas Company, Florida Gas Transmission Company, LLC...

Science.gov (United States)

2010-03-22

... Natural Gas Company, Southern Natural Gas Company, Florida Gas Transmission Company, LLC, Transcontinental... notice that on March 5, 2010, Northern Natural Gas Company (Northern Natural), 1111 South 103rd Street, Omaha, Nebraska 68124- 1000, filed on behalf of itself and other owners, Southern Natural Gas Company...

78 FR 38072 - Certain Consumer Electronics With Display and Processing Capabilities; Institution of...

Science.gov (United States)

2013-06-25

... INTERNATIONAL TRADE COMMISSION [Inv. No. 337-TA-884] Certain Consumer Electronics With Display and... electronics with display and processing capabilities by reason of infringement of U.S. Patent No. 6,650,327... after importation of certain consumer electronics with display and processing capabilities by reason of...

A Longitudinal BPR Study in a Danish Manufacturing Company - From Reengineering to Process Management

DEFF Research Database (Denmark)

Larsen, Michael Holm; Wieth, Christian; Domsten, Zenia Vittarp

1998-01-01

, Business Process Reengineering (BPR) is the most applied method for planning and carrying out projects. Novo Nordisk A/S is one of the largest companies in Denmark and the world's largest producer of industrial enzymes with a market share of more than 50%.This paper is a longitudinal study of BPR...... initiatives at Enzyme Business carried out within the time frame of January 1994 to March 1998. The paper provides empirical insight from a number of BPR-projects and related BPR-initiatives, e.g. Business System Reengineering projects. The results of the paper suggest that reengineering with the means...

Biofuel processes to be developed by French biotechnology company, Biomethodes

OpenAIRE

Trulove, Susan

2008-01-01

Bioméhodes, a French biotechnology company in Evry, has signed an exclusive and worldwide option-to-license agreement with Virginia Tech Intellectual Properties Inc. (VTIP) for multiple technologies for converting biomass to bioethanol and biohydrogen.

Electronic equipment for spectrometric data processing

International Nuclear Information System (INIS)

Antonov, L.J.; Trenev, A.M.; Todorova, E.I.; Dimitrov, V.D.

1978-01-01

Electronic equipment carrying out logical operations and a full set of the arithmetic operations was developed for spectrometric data processing. The flowsheet of the computing part of the device, made on the basis of a specialized integral circuit, is given. The device includes input registers, multiplexor, matrix commutator, arithmetic unit and indication unit. The equipment is rated to carry out calculations according to comparatively complex formulae in several seconds

WEB-GIS SOLUTIONS DEVELOPMENT FOR CITIZENS AND WATER COMPANIES

Directory of Open Access Journals (Sweden)

M. Şercăianu

2013-05-01

Full Text Available This paper describes the development of a web-GIS solution in which urban residents, from Buzau City, could be involved in decision-support process of water companies, in order to reduce water losses, by collecting information directly from citizens. In recent years, reducing material and economic losses, recorded in the entire municipal networks management process has become the main focus of public companies in Romania. Due to problems complexity that arise in collecting information from citizens and issues identified in urban areas, more analyzes were required related to web-GIS solutions used in areas such as local government, public utilities, environmental protection or financial management. Another important problem is the poor infrastructure development of spatial databases founded in public companies, and connection to web platforms. Developing the entire communication process between residents and municipal companies has required the use of concept "citizen-sensor" in the entire reporting process. Reported problems are related to water distribution networks with the possibility of covering the entire public utilities infrastructure.

Electron sterilization validation techniques using the controlled depth of sterilization process

International Nuclear Information System (INIS)

Cleghorn, D.A.; Nablo, S.V.

1990-01-01

Many pharmaceutical products, especially parenteral drugs, cannot be sterilized with gamma rays or high energy electrons due to the concomitant product degradation. In view of the well-controlled electron energy spectrum available in modern electron processors, it is practical to deliver sterilizing doses over depths considerably less than those defining the thickness of blister-pack constructions or pharmaceutical containers. Because bremsstrahlung and X-ray production are minimized at these low electron energies and in these low Z materials, very high electron: penetrating X-ray dose ratios are possible for the application of the technique. Thin film dosimetric techniques have been developed utilizing radiochromic film in the 10-60 g/m 2 range for determining the surface dose distribution in occluded surface areas where direct electron illumination is not possible. Procedures for validation of the process using dried spore inoculum on the product as well as in good geometry are employed to determine the process lethality and its dependence on product surface geometry. Applications of the process to labile pharmaceuticals in glass and polystyrene syringes are reviewed. It has been applied to the sterilization of commercial sterile products since 1987, and the advantages and the natural limitations of the technique are discussed. (author)

Application of Business Intelligence System in Company Restructuring Process: The Case of Croatia

Science.gov (United States)

Bakula, Iva; Curko, Katarina; Bach, Mirjana Pejic; Vukšic, Vesna Bosilj

2016-01-01

After Croatian accession to the EU, Croatian companies have faced tough competition and all other challenges posed by doing business in open markets. These companies must increase competitiveness and take their position on developed globalized markets through differentiation of their products and services and/or creation of cost advantage. For…

Orchestrating Company Development in SMEs

DEFF Research Database (Denmark)

Riis, Jens Ove

2003-01-01

Over a period of several years many companies undergo a transformation with signifi­cant improvement in performance. We have studied such a process in seven SMEs to achieve a better understanding of how the change process was initiated and orches­trated. A rather complex picture has emerged...

Neuroscience within companies: some case studies

Directory of Open Access Journals (Sweden)

Maria Emanuela Salati

2017-04-01

Full Text Available It is possible to understand many crucial processes within organizations such as change planning and management, training, decision making and leadership thanks to organisational neuroscience. For example, poorly managed change can result in alarm messages within our brains. Managers must be aware of how their words, emotions and conduct have a significant impact on team mood and results. Another fast-growing area of research is neuromarketing, thanks to company investments. This article presents a success story: a company that, faced with the need to change its selling proposition, uses neurometric techniques to analyse possible resistance of the sales force and then acted accordingly. Even training can significantly improve company efficiency thanks to neuroscience. This article also discusses some experiments carried out by the Training Department of a large public transport company.

The Internet as cannibal. Energy companies and E-commerce

International Nuclear Information System (INIS)

Van Gelder, J.W.

2000-01-01

It appears that Dutch energy companies are behind two years with respect to the use of electronic commercial services through the Internet. It is advised to study the different business models for E-commerce and to make a choice quick

THE EFFICIENCY OF IMPLEMENTING PRIVATE MANAGEMENT IN STATE COMPANIES

Directory of Open Access Journals (Sweden)

Mungiu-Pupăzan Mariana Claudia

2012-09-01

Full Text Available In 2012, nine state-owned companies are expected to have private management giving up the statemanagement. Therefore, a full debate of this issue is required, taking into consideration the fact that, in ouropinion, this process involves more than just the replacement of a manager with another. The implementationof private management in companies of national strategy, currently in state ownership, is desired to be aprofound and also very complex process, aiming to change organizational culture in depth, both verticallyand horizontally, so as to increase efficiency in these companies.Implementation of private management could be a good opportunity for an efficient development ofthese companies, for an increasing level of competitiveness on the international market, but only in terms ofa leadership team chosen on performance criteria, with a coherent set of objectives and a high independencelevel of decision.There are some opinions from people with experience in managing both private and statecompanies. They believe that the idea of establishing a private management in state companies, is, in themain, good, but it is essential to take into consideration the idea of a team trained to lead the company,instead of one person as a general manager.Another element to be taken into account, so that this idea of private management may have thedesired effect, is to precisely determine companies where private management teams should be installed. Notall companies are suitable for the same private management strategy. This type of leadership is better forcompanies with a real international perspective, such as Tarom, while strategic companies should be ratherreformed, including management privatization, and kept as state strategic areas. However, strict criteria ofstate intervention in decision-making process should be established, a striking question concerning thecircumstances under which such a management team could be successful, given that state firms are

Identification of complexity cost factors in manufacturing companies

DEFF Research Database (Denmark)

Myrodia, Anna; Hvam, Lars

2015-01-01

Complexity tends to be arguably the biggest challenge of manufacturing companies. As the demand from the customers increases in volume and diversity, the number of finished products and components increases as well. This increasing product complexity has a direct effect on the production processes....... This research focuses on the relation between product and process complexity. Complexity cost factors are identified and categorized under the industrial standard APQC for process classification. Then, this categorization is used as a tool for identification of complexity cost factors in seven companies...

Internationalization process of a company in Brazil northeastern: influence of external agents and choices of management

Directory of Open Access Journals (Sweden)

Elis Magalhães Freitas

2014-04-01

Full Text Available This paper aims to analyze the main characteristics of the international strategy formation process of an exporter fruit company, located in the São Francisco Valley (VCF, Northeastern of Brazil, regarding the influence of external agents and managerial choices of the firm. First, a brief contextualization of how this industry takes place in Brazil and abroad is presented. Seccondly, we discuss the theoretical concepts of strategies and then set up internationalization in the light of theories used as the basis for analysis, and these: Theory of Uppsala, Diamond Model Resource-based View (RBV, Product Lifecycle, Eclectic Paradigm Choice and Adaptive. The segment of empirical research is developed through an exploratory study involving company directors, through the application of semi-structured interviews. The analysis of data was performed by using the software Atlas.ti 6.0. Are apparent associations between models of internationalization and the way which the dimensions of analysis are mutually reinforced

Cross sections for electron and photon processes required by electron-transport calculations

International Nuclear Information System (INIS)

Peek, J.M.

1979-11-01

Electron-transport calculations rely on a large collection of electron-atom and photon-atom cross-section data to represent the response characteristics of the target medium. These basic atomic-physics quantities, and certain qualities derived from them that are now commonly in use, are critically reviewed. Publications appearing after 1978 are not given consideration. Processes involving electron or photon energies less than 1 keV are ignored, while an attempt is made to exhaustively cover the remaining independent parameters and target possibilities. Cases for which data improvements can be made from existing information are identified. Ranges of parameters for which state-of-the-art data are not available are sought out, and recommendations for explicit measurements and/or calculations with presently available tools are presented. An attempt is made to identify the maturity of the atomic-physics data and to predict the possibilities for rapid changes in the quality of the data. Finally, weaknesses in the state-of-the-art atomic-physics data and in the conceptual usage of these data in the context of electron-transport theory are discussed. Brief attempts are made to weight the various aspects of these questions and to suggest possible remedies

Focused-electron-beam-induced processing (FEBIP) for emerging applications in carbon nanoelectronics

International Nuclear Information System (INIS)

Fedorov, Andrei G.; Kim, Songkil; Henry, Mathias; Kulkarni, Dhaval; Tsukruk, Vladimir V.

2014-01-01

Focused-electron-beam-induced processing (FEBIP), a resist-free additive nanomanufacturing technique, is an actively researched method for ''direct-write'' processing of a wide range of structural and functional nanomaterials, with high degree of spatial and time-domain control. This article attempts to critically assess the FEBIP capabilities and unique value proposition in the context of processing of electronics materials, with a particular emphasis on emerging carbon (i.e., based on graphene and carbon nanotubes) devices and interconnect structures. One of the major hurdles in advancing the carbon-based electronic materials and device fabrication is a disjoint nature of various processing steps involved in making a functional device from the precursor graphene/CNT materials. Not only this multi-step sequence severely limits the throughput and increases the cost, but also dramatically reduces the processing reproducibility and negatively impacts the quality because of possible between-the-step contamination, especially for impurity-susceptible materials such as graphene. The FEBIP provides a unique opportunity to address many challenges of carbon nanoelectronics, especially when it is employed as part of an integrated processing environment based on multiple ''beams'' of energetic particles, including electrons, photons, and molecules. This avenue is promising from the applications' prospective, as such a multi-functional (electron/photon/molecule beam) enables one to define shapes (patterning), form structures (deposition/etching), and modify (cleaning/doping/annealing) properties with locally resolved control on nanoscale using the same tool without ever changing the processing environment. It thus will have a direct positive impact on enhancing functionality, improving quality and reducing fabrication costs for electronic devices, based on both conventional CMOS and emerging carbon (CNT/graphene) materials. (orig.)

DATA AND PROCESSING IN DEVELOPING ECCONOMIC APPLICATIONS

Directory of Open Access Journals (Sweden)

ADRIAN GHENCEA

2011-04-01

Full Text Available Economic Informatics originates in the industry economy and the electronic processing of information. A clear distinction is made between IT and economic informatics, and further between general and particular economic informatics (the particular economic informatics meaning administration, industrial informatics etc. Economic informatics is deemed to be an applicative science relating to the conception, working modality and representation of IT and communication systems, oriented towards companies which are using electronic computers. This paper pursues to integrate applications allowing the information systems to interconnect at informational level, by information sharing, and at service level, considering the control of the related processes in real time.

Competitive intelligence information management and innovation in small technology-based companies

Science.gov (United States)

Tanev, Stoyan

2007-05-01

In this article we examine how (i) company type and (ii) the competitive intelligence information used by small technology-based companies affect their innovation performance. The focus is on the specific information types used and not on the information sources. Information topics are classified in four groups - customers (10), company (9), competitor (11) and industry (12). The sample consists of 45 small new technology-based companies, specialized suppliers, and service companies from a variety of sectors - software, photonics, telecommunications, biomedical engineering and biotech, traditional manufacturing etc. The results suggest that the total number of intelligence information topics companies use to make decisions about innovation is not associated with the number of their new products, processes, services and patents. Therefore the companies in our sample do not seem to have the resources, processes or value systems required to use different competitive intelligence information when making decisions on innovation or may rely more on their own internal logic than on external information. Companies are classified using a Pavitt-like taxonomy. Service companies are considered as a separate company type. This allows for explicitly studying both, the innovative role of new services in product driven companies, and the role of new product development in service companies.

Use of mathematical modelling in electron beam processing: A guidebook

International Nuclear Information System (INIS)

2010-01-01

The use of electron beam irradiation for industrial applications, like the sterilization of medical devices or cross-linking of polymers, has a long and successful track record and has proven itself to be a key technology. Emerging fields, including environmental applications of ionizing radiation, the sterilization of complex medical and pharmaceutical products or advanced material treatment, require the design and control of even more complex irradiators and irradiation processes. Mathematical models can aid the design process, for example by calculating absorbed dose distributions in a product, long before any prototype is built. They support process qualification through impact assessment of process variable uncertainties, and can be an indispensable teaching tool for technologists in training in the use of radiation processing. The IAEA, through various mechanisms, including its technical cooperation programme, coordinated research projects, technical meetings, guidelines and training materials, is promoting the use of radiation technologies to minimize the effects of harmful contaminants and develop value added products originating from low cost natural and human made raw materials. The need to publish a guidebook on the use of mathematical modelling for design processes in the electron beam treatment of materials was identified through the increased interest of radiation processing laboratories in Member States and as a result of recommendations from several IAEA expert meetings. In response, the IAEA has prepared this report using the services of an expert in the field. This publication should serve as both a guidebook and introductory tutorial for the use of mathematical modelling (using mostly Monte Carlo methods) in electron beam processing. The emphasis of this guide is on industrial irradiation methodologies with a strong reference to existing literature and applicable standards. Its target audience is readers who have a basic understanding of electron

Programmable electronic system for analog and digital gamma cameras modernization

International Nuclear Information System (INIS)

Osorio Deliz, J. F.; Diaz Garcia, A.; Arista Omeu, E. J.

2013-01-01

At present the use of analog and digital gamma cameras is continuously increasing in developing countries. Many of them still largely rely in old hardware electronics, which in many cases limits their use in actual nuclear medicine diagnostic studies. For this reason worldwide there are different medical equipment manufacturing companies engaged into partial or total Gamma Cameras modernization. Nevertheless in several occasions acquisition prices are not affordable for developing countries. This work describes the basic features of a programmable electronic system that allows improving acquisitions functions and processing of analog and digital gamma cameras. This system is based on an electronic board for the acquisition and digitization of nuclear pulses which have been generated by gamma camera detector. It comprises a hardware interface with PC and the associated software to fully signal processing. Signal shaping and image processing are included. The extensive use of reference tables in the processing and signal imaging software allowed the optimization of the processing speed. Time design and system cost were also decreased. (Author)

A REDESIGN LAYOUT TO INCREASE PRODUCTIVITY OF A COMPANY

Directory of Open Access Journals (Sweden)

Vincentia Kitriastika

2013-06-01

Full Text Available This project is conducted in Company X, a passenger cars wheel producing company located in Sunter, North Jakarta. With a view of increasing the productivity of the company, the focus of this project will be redesigned the layout of the factory. The main problem encountered is that the goods are not produced in single location, causing a considerable hindrance in terms of time and distance, and hence efficiency. The redesigning layout process will use SLP method and flow analysis while supported by analysis of assembly line balancing to optimize the layout. Regarding the evaluation process, ARENA software will be used to simulate and identify the bottleneck in the production process, and comparing the layout alternatives to decide the best layout. The best chosen layout according to the simulation and SLP method that supported with flow analysis and assembly line balancing will be used as the master draft layout that will be proposed to Company X.

Corporate governance structure which is based in the S&OP process: Case study in la Brazilian cosmetic company

Directory of Open Access Journals (Sweden)

Ximena Rojas

2014-03-01

Full Text Available (Received: 2014/01/31 - Accepted: 2014/03/25This article is about the generation of a corporate governance structure which is based in the process S&OP for a Brazilian cosmetic industry. The increasing emphasis on business development guided by attention to the requirements and demands of customers, cause nowadays, that the organizations of the commercial sectors work in the creation of a competitive differential. The collaborative business management strategy S&OP is looking for the attention of people who are interested in the improvement of their skills; in order to achieve this differential. With the case study methodology, the objectives are to get knowledge, identify, and analyze the characteristics of the company using analysis tools like SWOT, process analysis, value chain. All with the purpose to get a robust management tool that fits with the requirements and demands of the organization. The analyzed results showed that the principles of collaboration and internal communication were the pillars necessary against any attempt of business development. This supports the proposal of a management structure based on the five step S&OP process. As a complement to this study a methodology CPFR was identified as the platform for an integrated work with the rest of the companies of the supply chain.

The effectiveness of innovative processes implemented by the SME companies. Results of the empirical research

Directory of Open Access Journals (Sweden)

Tomasz Norek

2013-01-01

Full Text Available The essence and the importance of innovation in the process of building the competitiveness of enterprises is widely described in the economic literature. But the analysis of innovative activity of companies very often indicates that the innovations introduced to the market do not bring the expected benefits. This leads to the conclusion that very often innovation activities of enterprises are inefficient. And detailed analysis of such cases can identify the key barriers to implementing effective innovation.The modern model for the innovative activity indicates that one of the key factors for success of innovative activity of enterprises is properly implemented the introduction of new solutions to market. The problem of diffusion of innovation involves a number of issues related to the process of spreading and promoting innovation in the market. It is widely recognized that the powers of innovation diffusion is an important determinant of the capacity of firms.Author posed the following research hypothese: Innovative activities carried out by the surveyed companies is inefficient.The purpose of this paper is to present the problems associated with effective diffusion of innovation in the SME sector business activity in Poland, with particular emphasis on the barriers in this area. Commonly available statistical data, the author’s empirical research results from the period 2009–2012 and results of other studies conducted by the University of Szczecin were used to prepare this publication.

Impact of ICT on Performance of Construction Companies in Slovakia

Science.gov (United States)

Mesároš, Peter; Mandičák, Tomáš

2017-10-01

Information and communication technologies became a part of management tools in modern companies. Construction industry and its participants deal with a serious requirement for processing the huge amount of information on construction projects including design, construction, time and cost parameters, economic efficiency and sustainability. To fulfil this requirement, companies have to use appropriate ICT tools. Aim of the paper is to examine the impact of ICT exploitation on performance of construction companies. The impact of BIM tools, ERP systems and controlling system on cost and profit indicators will be measured on the sample of 85 companies from construction industry in Slovakia. Enterprise size, enterprise ownership and role in construction process will be set as independent variables for statistical analyse. The results will be considered for different groups of companies.

The Incompetence of Labour Court to Proceed With the Executions of the Labour Processes After Declared Bankruptcy of the Company

Directory of Open Access Journals (Sweden)

Érika Santiago Silva

2015-12-01

Full Text Available The 11.101/05 Law, when dealing with the bankruptcy of commercial companies, as basic postulates invokes the principles of universality and indivisibility of the bankruptcy court, beyond the principle of par conditio creditorum. However, the Labour Court, disregarding the purpose of the Bankruptcy Law, and in flagrant violation of the mentioned principles, insists on proceeding with the executions of the labor processes proposed against the bankrupt company, surpassing the limits of their competence, thus so completely arbitrary, piercing the corporate veil in order to reach the personal patrimony of the shareholders of the company. This practice may prejudice the bankruptcy, since, if ascertained the liability of bankrupt partners, they will no longer have patrimony to be raised by the bankruptcy, because all of its property have been realized in favor only of labor creditors, thus offending the equality that all the creditors must be treated.

Two-parametric model of electron beam in computational dosimetry for radiation processing

International Nuclear Information System (INIS)

Lazurik, V.M.; Lazurik, V.T.; Popov, G.; Zimek, Z.

2016-01-01

Computer simulation of irradiation process of various materials with electron beam (EB) can be applied to correct and control the performances of radiation processing installations. Electron beam energy measurements methods are described in the international standards. The obtained results of measurements can be extended by implementation computational dosimetry. Authors have developed the computational method for determination of EB energy on the base of two-parametric fitting of semi-empirical model for the depth dose distribution initiated by mono-energetic electron beam. The analysis of number experiments show that described method can effectively consider random displacements arising from the use of aluminum wedge with a continuous strip of dosimetric film and minimize the magnitude uncertainty value of the electron energy evaluation, calculated from the experimental data. Two-parametric fitting method is proposed for determination of the electron beam model parameters. These model parameters are as follow: E 0 – energy mono-energetic and mono-directional electron source, X 0 – the thickness of the aluminum layer, located in front of irradiated object. That allows obtain baseline data related to the characteristic of the electron beam, which can be later on applied for computer modeling of the irradiation process. Model parameters which are defined in the international standards (like E p – the most probably energy and R p – practical range) can be linked with characteristics of two-parametric model (E 0 , X 0 ), which allows to simulate the electron irradiation process. The obtained data from semi-empirical model were checked together with the set of experimental results. The proposed two-parametric model for electron beam energy evaluation and estimation of accuracy for computational dosimetry methods on the base of developed model are discussed. - Highlights: • Experimental and computational methods of electron energy evaluation. • Development

Digital signal processing in power electronics control circuits

CERN Document Server

Sozanski, Krzysztof

2013-01-01

Many digital control circuits in current literature are described using analog transmittance. This may not always be acceptable, especially if the sampling frequency and power transistor switching frequencies are close to the band of interest. Therefore, a digital circuit is considered as a digital controller rather than an analog circuit. This helps to avoid errors and instability in high frequency components. Digital Signal Processing in Power Electronics Control Circuits covers problems concerning the design and realization of digital control algorithms for power electronics circuits using

PROCESS DEVELOPMENT FOR THE RECOVERY OF CRITICAL MATERIALS FROM ELECTRONIC WASTE

Energy Technology Data Exchange (ETDEWEB)

Lister, T. E.; Diaz, L. A.; Clark, G. G.; Keller, P.

2016-09-01

As electronic technology continues to evolve there is a growing need to develop processes which recover valuable material from antiquated technology. This need follows from the environmental challenges associated with the availability of raw materials and fast growing generation of electronic waste. Although just present in small quantities in electronic devices, the availability of raw materials, such as rare earths and precious metals, becomes critical for the production of high tech electronic devices and the development of green technologies (i.e. wind turbines, electric motors, and solar panels). Therefore, the proper recycling and processing of increasing volumes of electronic waste present an opportunity to stabilize the market of critical materials, reducing the demand of mined products, and providing a proper disposal and treatment of a hazardous waste stream. This paper will describe development and techno-economic assessment of a comprehensive process for the recovery of value and critical materials from electronic waste. This hydrometallurgical scheme aims to selectively recover different value segments in the materials streams (base metals, precious metals, and rare earths). The economic feasibility for the recovery of rare earths from electronic waste is mostly driven by the efficient recovery of precious metals, such as Au and Pd (ca. 80 % of the total recoverable value). Rare earth elements contained in magnets (speakers, vibrators and hard disk storage) can be recovered as a mixture of rare earths oxides which can later be reduced to the production of new magnets.

Characterization of the medical department of pharmaceutical companies operating in Portugal

Directory of Open Access Journals (Sweden)

Acílio Gala

2017-04-01

Full Text Available In a context of strong regulatory demands and high economic pressures and constraints, medical departments within pharmaceutical companies, have demonstrated its strategic relevance even though the functions to embrace are not globally consensual. In this context, a study that intended to analyse the management of medical activities, in pharmaceutical companies operating in Portugal, including allocated human resources and investment trends, was implemented. Quantitative information was collected through an electronic survey, in pharmaceutical companies with activity in Portugal. The analysis of the results supported the conclusion that the majority of the companies are affiliates of international companies and that 79% of them have formalized medical departments. The human resources of the medical departments of the participant companies include several professional classes, with predominance of pharmacists. Globally, the number of employees of the medical area has registered a systematic growth in the last years. It was also possible to conclude that the majority of the companies are increasing the investment in medical affairs activities. This study enables the understanding of these activities in pharmaceutical companies operating in Portugal, within the international panorama of pharmaceutical industry. It contributes to improve the knowledge about the relevance of medical departments while enabling the definition of novel pathways to increase the competiveness and sustainability of the companies.

The aplication of electronic commerce in the distribution of insurance services

Directory of Open Access Journals (Sweden)

Piljan Ivan

2016-01-01

Full Text Available The paper describes the importance of information and communication technology for the development of the insurance companies, with special emphasis on the current development and potential for further development of marketing, and the distribution of insurance products in particular, which relies on information and communication technologies, especially the Internet. A special place here is reserved for the internet marketing as the most common of Internet uses among insurance companies. Transforming business processes so that they comply with the principles of electronic commerce will in the neaar future become common even in smaller businesses, formerly conservative financial institutions, e.g. insurance companies, are increasingly turning to e-insurance which, despite high costs of its introduction and initial problems in the operation, are to be relied upon in the near future. Therefore, in many countries, it is becoming accepted, to a greater or lesser extent. Mobile communication brings the biggest changes in electronic commerce. Even today, its prevalence among consumers offers great opportunities for service providers. Insurance companies in our country at this moment do not offer their services through this specific communication channel, but in the very near future changes can be expected in this field, due to the fact that the prerequisites for that exist in Serbia. This is supported by information that some insurance companies in the neighboring countries have already activated their first applications for smart phones and similar applications in the Serbian banking industry already exist.

Contribution of the analytic hierarchy process (AHP method for supporting the decision to outsource or internalize activities in the context of technology-based company

Directory of Open Access Journals (Sweden)

Luciana Paula Reis

2013-11-01

Full Text Available The definition of business model requires, among other decisions, the structure of the value chain of an emerging new organization. This structure depends on the decision to outsource or internalize sets of processes and their activities. This decision fundamentally strategic, demand a correct definition of the activities that actually add value to the business, and therefore desirable a methodology able to assist the manager in the process of decision making. This paper aims to propose a process to aid decision to outsource or internalize activities in the context of a technology-based company, using the strategy of action research methods associated with the Analytic Hierarchy Process (AHP and focus group technique. The study has resulted in the structuring of the decision process and criteria relevant to the identification of activities to be internalized by the technology-based company.

Systematic approach to modernizing the production company

Directory of Open Access Journals (Sweden)

Irina Valeryevna Makarova

2011-06-01

Full Text Available This paper discusses development of modernization processes in the Russian industrial enterprises. The object of the current study is the JSC "Perm Company of petroleum machinery-producing industry". It has been manufacturing oilfield service products of various kinds. It is shown that the impact of modernization on the enterprise depends not only on the local effectiveness of selected solutions, but also on the overall strategy of sustainable development. Modernization is a strategic planning tool. Taking into account the need for a comprehensive approach to strategic development and modernization, the top five stages of the development strategy of the company were mentioned: 1 analysis of internal and external environment; 2 definition of the mission and goals; 3 choice of strategy and baseline scenarios; 4 development of basic strategy; 5 implementation of the strategy. At each stage, methods and tools for strategic planning, as well as the tools of modernization are defined. The relationship between modernization and development strategy of the company is shown. It was revealed that an integrated approach to the modernization and incremental implementation are the basics for the use of a hierarchical system of optimization models to describe the process of manufacturing company modernization. As the target model of the upper level, financial performance of the company is defined. This approach has the following advantages over the point upgrading - reducing the probability of omission of important limitations and ineffective use of resources during the transition to modernization of the company. Basing on the main strategic goals, main directions and tasks of modernization, which are integrated into the tree ends were formed. A thesis was substantiated that he essence of modernization lies in the continuity of mutually complex processes of improving all its directions. For the JSC "Perm Company of petroleum machinery-producing industry

How a traditional company seeded new analytics capabilities

NARCIS (Netherlands)

Gust, G. (Gunther); D. Neumann (Dirk); Flath, C.M. (Christoph M.); T. Brandt (Tobias); Ströhle, P. (Philipp)

2017-01-01

textabstractDeveloping state-of-the art data analytics capabilities is a challenge for traditional companies with long-established processes and legacy systems. We describe how one such company (a Swiss electricity utility) conducted a seed project-a bottom-up initiative to develop an analytics

A Conceptual Model for the Creation of a Process-Oriented Knowledge Map (POK-Map and Implementation in an Electric Power Distribution Company

Directory of Open Access Journals (Sweden)

Babak Teimourpour

2015-12-01

Full Text Available Helping a company organize and capture the knowledge used by its employees and business processes is a daunting task. In this work we examine several proposed methodologies and synthesize them into a new methodology that we demonstrate through a case study of an electric power distribution company. This is a practical research study. First, the research approach for creating the knowledge map is process-oriented and the processes are considered as the main elements of the model. This research was done in four stages: literature review, model editing, model validation and case study. The Delphi method was used for the research model validation. Some of the important outputs of this research were mapping knowledge flows, determining the level of knowledge assets, expert-area knowledge map, preparing knowledge meta-model, and updating the knowledge map according to the company’s processes. Besides identifying, auditing and visualizing tacit and explicit knowledge, this knowledge mapping enables us to analyze the knowledge areas’ situation and subsequently help us to improve the processes and overall performance. So, a process map does knowledge mapping in a clear and accurate frame. Once the knowledge is used in processes, it creates value.

Delinquent directors under the Companies Act 71 of 2008: Gihwala ...

African Journals Online (AJOL)

Potchefstroom Electronic Law Journal/Potchefstroomse Elektroniese Regsblad ... 71 of 2008 infringed the constitutional right to dignity, the right to choose a trade, ... determining whether the offences set out in section 162(5) of the Companies ...

76 FR 12726 - Tropicana Manufacturing Company, Inc.; Supplemental Notice That Initial Market-Based Rate Filing...

Science.gov (United States)

2011-03-08

... . To facilitate electronic service, persons with Internet access who will eFile a document and/or be... Manufacturing Company, Inc.; Supplemental Notice That Initial Market-Based Rate Filing Includes Request for... Tropicana Manufacturing Company, Inc.'s application for market-based rate authority, with an accompanying...

Innovation policy of European chemical companies with special focus on large companies

Directory of Open Access Journals (Sweden)

Supriyo Das

2015-07-01

Full Text Available According to Arora et alii (1998, the chemical industry is one of the largest and most R&D-intensive manufacturing sectors in all the advanced economies, and its innovative patterns and productivity growth processes can have profound impacts on economic growth as a whole. The European chemical industry supplies virtually all sectors of the economy and accounts for 17.8% of the total sales of chemicals in the world. This paper gives an overview of the European chemical industry and the changing scenario of the world chemical industry by focusing on the top fifteen chemical companies in Europe. It describes the current problems this industry is facing in Europe especially after the economic crisis and shows that the region and the top companies are investing in R&D to bring about innovation and overcome the current challenges. It shows that R&D spending in absolute terms has hardly changed over the years and that the industry is still globally the largest investor in R&D activities. In terms of R&D, BASF has made the greatest investment followed by Bayer and Syngenta, while R&D intensity is highest for Syngenta and Bayer. BASF and Bayer have made most patent applications and have also had the highest number of patents granted. The quality of research in most chemical companies is very high and most of the large European companies make their first patent application in Europe rather than elsewhere. All the large chemical companies use Merger & Acquisition (M&A to gain access to innovation. Industry-academia collaboration is one way to generate innovation in the chemical industry in Europe. Chemical clusters and the geographical distribution of chemical companies play a significant role in generating innovation.

Polyelectrolytes processing at pilot scale level by electron beam irradiation

International Nuclear Information System (INIS)

Martin, D.; Cirstea, E.; Craciun, G.; Ighigeanu, D.; Marin, Gheorghe G.

2002-01-01

Three years of research, combined with engineering activities, have culminated in the development of a new method of electron beam processing applicable up to the pilot scale level, namely, the polyelectrolytes (acrylamide - acrylic acid copolymers) electron beam processing. This new radiation processing method has been achieved by bilateral co-operation between the National Institute for Laser, Plasma and Radiation Physics (NILPRP) and the Electrical Design and Research Institute, EDRI - Bucharest. The polyelectrolytes electron beam (EB) processing was put in operation at EDRI, where, recently, an industrial electron accelerator of 2 MeV and 20 kW, manufactured by Institute of Nuclear Physics, Novosibirsk, Russia was installed in a specially designed irradiation facility. Automatic start-up via computer control makes it compatible with industrial processing. According to the first conclusions, which resulted from our experimental research with regard to acrylamide - acrylic acid copolymers production by EB irradiation, the proper physical and chemical characteristics can be well controlled by chemical composition to be treated and by suitable adjustment of absorbed dose and absorbed dose rate. So, it was possible to obtain a very large area of characteristics and therefore a large area of applications. The conversion coefficient is very high (> 98%) and concentration of the residual monomer is under 0.05%. The tests applied to some wastewaters from the vegetable oil plants demonstrated that the fatty substances, matters in suspension, chemical oxygen demand and biological oxygen demand over 5 days were much reduced, in comparison with classical treatment. Also, sedimentation time was around four times smaller and sediment volume was 60% smaller than the values obtained in case of classical treatment. The necessary EB absorbed dose for the acrylamide - acrylic acid aqueous solution polymerization, established by optimization of chemical composition and irradiation

Establishment of a Clothing Company in Finland Based on a University Brand Case: LAMK Apparel Company

OpenAIRE

Biliba, Arsenii; Mishchenko, Nikita

2017-01-01

This thesis aims to assist LAMK Apparel Company in its entry into the clothing market, in Finland. Based on country analysis of the two target countries (Russia and Finland), its original business idea is developed together with innovative concepts. Accordingly, the business plan is created to describe an applicable development way for the idea. The authors focus on the process of establishing a clothing company in Finland based on a university brand through the implementation of a business p...

COMPANY ACTIVITY FINANCIAL RISK

Directory of Open Access Journals (Sweden)

Caruntu Genu Alexandru

2012-12-01

Full Text Available In economic and financial activity, risk is an inherent financial decisions, encountered in daily agenda of managers of companies. Unexpected changes in the price of a product development not only affect the financial results of a company, but can cause even bankruptcy. In fact, the nature of financial decisions involve uncertainty. Financial decisions are made based on cash flows under future contracts, which are par excellence incerte.Activitatea an enterprise that holds any weight in the industry is subject to risks, since it can not predict with certainty different components of its outcome (cost, quantity, price and operating cycle (purchase, processing, sales.

Chinese Companies in Switzerland

Directory of Open Access Journals (Sweden)

Esther Kessler

2014-10-01

Full Text Available In recent years, some of China’s leading firms have made headlines with their European expansion, by either opening new facilities or by acquiring or merging with significant enterprises in Europe. The goal of this paper is to contribute to the existing literature by examining Chinese enterprises expanding into Switzerland. The study also allows some conclusions for Chinese companies entering Central and Eastern Europe. We analyze via interviews the motivations of Chinese companies to expand into Switzerland as well as their behavior and the impediments in their internationalization process. Our findings show that Chinese companies fail to take advantage of certain benefits of western economies (such as open information and stable rule of law. To move forward efficiently, they should develop competence in dealing systematically with readily available market information, building professional networks that recognize a separation between business life and personal life, and managing their Chinese and foreign employees in the foreign cultural environment.

The Study on the Penalty Function of the Insurance Company When the Stock Price Follows Exponential Lévy Process

Science.gov (United States)

Wu, Zhao; Ding-Cheng, Wang; Yong, Zeng

This paper investigates the penalty function under the condition that the insurance company is allowed to invest certain amount of money in some stock market and the remaining reserve in the bond with constant interest force. Through the properties of exponential Lévy process and discrete embedded method, the integral equations for penalty function is derived under the assumption that the stock price follows exponential Lévy process. The method for explicitly computing the ruin quantities is obtained.

Contribution of charge-transfer processes to ion-induced electron emission

International Nuclear Information System (INIS)

Roesler, M.; Garcia de Abajo, F.J.

1996-01-01

Charge changing events of ions moving inside metals are shown to contribute significantly to electron emission in the intermediate velocity regime via electrons coming from projectile ionization. Inclusion of equilibrium charge state fractions, together with two-electron Auger processes and resonant-coherent electron loss from the projectile, results in reasonable agreement with previous calculations for frozen protons, though a significant part of the emission is now interpreted in terms of charge exchange. The quantal character of the surface barrier transmission is shown to play an important role. The theory compares well with experimental observations for H projectiles. copyright 1996 The American Physical Society

The role of tourism and hospitality companies in ensuring an effective internship process

Directory of Open Access Journals (Sweden)

Agita Doniņa

2015-09-01

Full Text Available Tourism and hospitality education has only been provided in Latvia as a separate curriculum relatively recently. According to legislation, the curriculum should consist of study courses, internships and the state exam. Cooperation between all stakeholders is crucial in order to achieve the goal of internship – to increase students’ knowledge and to develop skills in the study area chosen. The purpose of this study is to explore cooperation between higher educational establishments and companies targeted at enhancing students’ employability skills. The survey was conducted in Latvia by addressing managers of 154 tourism and hospitality industry companies in 2014. The findings showed that only 51.30% of the companies plan interns’ job assignment during internship on the basis of an internship programme and in 35.06% of the cases higher educational establishments do not contact internship companies for feedback at all. This means that, despite the importance of internships in developing students’ skills, cooperation among all stakeholders does not proceed in the best possible manner. It is suggested to improve cooperation at all stages of internship – at the planning, organisational and control stages.

New procedures of ergonomics design in a large oil company.

Science.gov (United States)

Alhadeff, Cynthia Mossé; Silva, Rosana Fernandes da; Reis, Márcia Sales dos

2012-01-01

This study presents the challenge involved in the negotiation and construction of a standard process in a major petroleum company that has the purpose of guiding the implementation of ergonomic studies in the development of projects, systemising the implementation of ergonomics design. The standard was created by a multi-disciplinary working group consisting of specialists in ergonomics, who work in a number of different areas of the company. The objective was to guide "how to" undertake ergonomics in all projects, taking into consideration the development of the ergonomic appraisals of work. It also established that all the process, in each project phase, should be accompanied by a specialist in ergonomics. This process as an innovation in the conception of projects in this company, signals a change of culture, and, for this reason requires broad dissemination throughout the several company leadership levels, and training of professionals in projects of ergonomics design. An implementation plan was also prepared and approved by the corporate governance, complementing the proposed challenge. In this way, this major oil company will implement new procedures of ergonomics design to promote health, safety, and wellbeing of the workforce, besides improving the performance and reliability of its systems and processes.

Radiosterilization process control in plants using electron accelerators

International Nuclear Information System (INIS)

Stuglik, Z.

1997-01-01

Electron beam parameters deciding the irradiation dose in radiosterilization plants should be continuously controlled during the process. Dosimetric procedure suitable to irradiated material and dose range should be chosen. The practical advice and directions in this subject have been done. 7 refs

The Knowledge Management for Innovation Processes for SME Sector Companies

Directory of Open Access Journals (Sweden)

Tomasz Norek

2013-01-01

Full Text Available The complexity and variability of the modern economy means that the informationbecomes a key resource, essential for the proper functioning of anyenterprise and in the broader sense of the country and the national economy.Currently, practically all areas of modern economics are grappling withthe problem of information management, both in theory and practice. It isespecially visible in the attempts to support knowledge management in theareas, which are considered core from the viewpoint of increasing marketcompetitiveness of the company. Knowledge management in the field of company’sinnovative potential or in the area of intellectual capital may serve asan example. This situation forces the search for new solutions of knowledgemanagement in the field of research and evaluation of the innovative potentialof companies. The main purpose of this article is to present an Internetplatform for innovation audit, as a tool which supports knowledge management.An additional goal of this article is to present the preliminary results ofa research carried out by means of the described tools.

The Importance of Trust and Networking in the Learning Process of Polish Companies

DEFF Research Database (Denmark)

Lorentzen, Anne

2002-01-01

Innovation, learning and competitiveness are positively loaded concepts, which are in focus in today?s research on enterprise development. The paper shows that this challenge also faces companies in Central and Eastern Europe.......Innovation, learning and competitiveness are positively loaded concepts, which are in focus in today?s research on enterprise development. The paper shows that this challenge also faces companies in Central and Eastern Europe....

Closing the Loop : Reverse supply chain management andproduct return processes in electronics retailing

OpenAIRE

Gorskova, Julija; Ortega, Edrion

2012-01-01

Abstract Problem There is a gap in the knowledge concerning reverse product flows due to a lack of research and empirical data in the field of reverse supply chain management in general. Furthermore, more research is needed to investigate the factors influencing the decision making process regarding the right reverse supply chain recovery option choice for companies in order to close the supply chain loop. Processing product returns has become a critical activity for organisations as the volu...

THE MODEL OF WORK IN PROCESS INVENTORY MANAGEMENT OF RAIL CARS BUILDING COMPANY

Directory of Open Access Journals (Sweden)

Julia BULGAKOVA

2013-12-01

Full Text Available The necessity of work-in-process management of rail-cars production by intelligent decision support software, which is based on JIT and Kanban principles, is identified. The scheme of one type cargo-flow movement between two workshops with control by electronic and traditional kanban-card is offered. For simulation of rail-cars production cargo flows Markov chain of M/M/1/1 type was applied. Simulation shows the dependence of the work-in-process on the in-flow and out-flow intensity. To determine the high level of the optimal work-in-process the stochastic inventory management model is applied.

Web related companies' strategies for attracting new customers

Directory of Open Access Journals (Sweden)

Bruno Marsigalia

2014-01-01

Full Text Available This paper provides a study on web related B2B (Business to Business, B2C (Business to Customer evaluation of strategy and methods for maximizing (expanding the number of customer among the people (i.e. internet population, using cycling process externally for internal process of strategy which explains business exploration and agility, and online consumers their compulsive buying behaviour with a new strategy to capture them in large number. The web based industries are web based companies and web related companies, we concentrated on web related company through new innovative method called B2P (Business to People/Public a schematic approach strategy diagram of B2P, and with external Process of strategy. The B2B and B2C (Business to Customer used by enterprises in peer to peer process is based on a qualitative approach, our sourcing of data has been carried out through secondary sources (papers, articles, open sources. The findings are the representation of new schematic diagrams that we developed with an idea and proposal and approach strategy for attaining people interest in the online industry specially concentrated as example on online book selling company. The originality of this paper called concept B2P is from different sources, examples, online articles and built on industry leaders advice through "linkedin.com" and web blogs.

ANALYSIS OF FINANCIAL DUE DILIGENCE UNSUCCESSFUL BUSINESS COMPANIES IN SERBIA

Directory of Open Access Journals (Sweden)

JELENA Toskovic

2015-06-01

Full Text Available In conditions of extreme financial and corporate scandals, in order to achieve a good position in the market and thus maximize profit, modern companies and their top managers must make continual innovation and change, as an adaptation of one of the basic imperatives of modern business. This means that today's modern enterprises are facing numerous challenges, including the need to find a way to survival, growth and development. The global economic crisis that occurred in 2007 passed the downfall of many companies and put into focus the creative application of financial resources in the process of bankruptcy. Each company during its life cycle comes to a situation that is found in some form of crisis, but if it fails to overcome the crisis inevitably is to declare bankruptcy, which is a recognition that the company failed to meet its objectives. The causes of business failure are different, so the task of the financial due diligence to do the recording of enterprises, carefully, systematically and thoroughly investigate, examine and analyze them information company that filed for bankruptcy. The point of introduction of due diligence is in providing input as soon as possible, in order to take advantage of information in the right way and made the right decisions and strategies of the business. So due diligence serves as a tool or vehicle for designing business decisions, which is in the territory of the Republic of Serbia still minimal use. The reorganization process is applied rather than the liquidation process, precisely in order to use all the resources that the company has, and thus protect shareholders, creditors and suppliers. This process is strictly controlled and regularized to avoid possible abuse by management that led the company to bankruptcy. The legislation allows considerable benefits company in the reorganization process, just to fit in a healthy leg, changed unsuccessful business and financial structure of the successful and

Innovation strategies for generic drug companies: moving into supergenerics.

Science.gov (United States)

Ross, Malcolm S F

2010-04-01

Pharmaceutical companies that market generic products generally are not regarded as innovators, but rather as companies that produce copies of originator products to be launched at patent expiration. However, many generics companies have developed excellent scientific innovative skills in an effort to circumvent the defense patents of originator companies. More patents per product, in terms of both drug substances (process patents and polymorph patents) and formulations, are issued to generics companies than to companies that are traditionally considered to be 'innovators'. This quantity of issued patents highlights the technical knowledge and skill sets that are available in generics companies. In order to adopt a completely innovative model (ie, the development of NCEs), a generics company would require a completely new set of skills in several fields, including a sufficient knowledge base, project and risk management experience, and capability for clinical data evaluation. However, with relatively little investment, generics companies should be able to progress into the so-called 'supergeneric' drug space - an area of innovation that reflects the existing competencies of both innovative and generics companies.

Flexible organic electronic devices: Materials, process and applications

International Nuclear Information System (INIS)

Logothetidis, Stergios

2008-01-01

The research for the development of flexible organic electronic devices (FEDs) is rapidly increasing worldwide, since FEDs will change radically several aspects of everyday life. Although there has been considerable progress in the area of flexible inorganic devices (a-Si or solution processed Si), there are numerous advances in the organic (semiconducting, conducting and insulating), inorganic and hybrid (organic-inorganic) materials that exhibit customized properties and stability, and in the synthesis and preparation methods, which are characterized by a significant amount of multidisciplinary efforts. Furthermore, the development and encapsulation of organic electronic devices onto flexible polymeric substrates by large-scale and low-cost roll-to-roll production processes will allow their market implementation in numerous application areas, including displays, lighting, photovoltaics, radio-frequency identification circuitry and chemical sensors, as well as to a new generation of modern exotic applications. In this work, we report on some of the latest advances in the fields of polymeric substrates, hybrid barrier layers, inorganic and organic materials to be used as novel active and functional thin films and nanomaterials as well as for the encapsulation of the materials components for the production of FEDs (flexible organic light-emitting diodes, and organic photovoltaics). Moreover, we will emphasize on the real-time optical monitoring and characterization of the growing films onto the flexible polymeric substrates by spectroscopic ellipsometry methods. Finally, the potentiality for the in-line characterization processes for the development of organic electronics materials will be emphasized, since it will also establish the framework for the achievement of the future scientific and technological breakthroughs

Do Callable Convertibles Support The Investment Process Of A Company? An Analysis Of The World Market Of Hybrid Debt

Directory of Open Access Journals (Sweden)

Kaźmierczak Damian

2017-06-01

Full Text Available Using a sample of 1,705 convertible bonds issued by manufacturing and service companies from the United States (1,138 issues; Europe (270; and Asia (297 between 2004 and 2014 this paper investigates the role of callable convertibles in the corporate investment process. This research shows first that callable convertibles are used to finance investment projects particularly by American firms which may exercise new investment options to improve poor financial performance. Secondly, the same strategy may be followed by European companies, but they seem not to carry out investments on as large a scale as American firms. Thirdly, the research results do not provide evidence that Asian enterprises use callable convertibles for investment purposes: they likely use these instruments for different reasons.

Supply chain risk management in newspaper company: House of risk approach

Science.gov (United States)

Ratnasari, Sintya; Hisjam, Muhammad; Sutopo, Wahyudi

2018-02-01

In the supply chain (SC) of newspapers, the printing company is the main entity that has several processes, i.e. procure raw materials, print plate and newspapers, and also distribute newspaper to consumers. The existing risks in the newspaper printing company are quite high. A wide range of disturbances or risks needs to be identified to map out the characteristics of the risk sources that will impact on the performance of the supply chain. Therefore, the printing companies need to manage their supply chain risk of the five major SC processes (such as plan, source, deliver, make, and return). In a case study of a newspaper company in Surakarta, the company have not implemented a risk management process that affects the company. This study is aimed to map the risks in the printing company and formulate risk mitigation alternatives to mitigate the risks. The house of risk (HOR) method was chosen to select a set of proactive actions deemed cost-effective in managing SC Risks in the newspaper company. The model consisting of two stages, the first stage (HOR1) was done by identifying risk, risk causing agents and then measured the severity and occurrences to calculate the Aggregate Risk Priority (ARP) value. The second stage (HOR2) is intended to formulate and prioritize the action of mitigation that the company should pursue to reduce the probability of risk agents to occur. The result shows that the innovative model of HOR in Newspaper Company was presented. There are 24 risk events, 20 causing agents and two priority risks in HOR1. The HOR 2 was proposed 9 ranks of mitigation strategy for priority risk agents, from the easiest to the hardest strategy for the company to implement it.

Scaling laws in high energy electron-nuclear processes

International Nuclear Information System (INIS)

Chemtob, M.

1980-11-01

We survey the parton model description of high momentum transfer electron scattering processes with nuclei. We discuss both nucleon and quark parton models and confront the patterns of scaling laws violations, induced by binding effects, in the former, and perturbative QCD effects, in the latter

Strategy update in a design and consulting company

OpenAIRE

Kiviniemi, Juha

2017-01-01

The target company of the present thesis is a small engineering company specialising in electrical design. The company’s current development stage and changes in its operating environment call for a strategy up-date. The objective of this study was to formulate key conclusions based on an analysis of the company’s current strategy and its operating environment which will later act as an input to the company’s strategy process. The strategy process itself is left outside the scope of this...

Practice for dosimetry in electron and bremsstrahlung irradiation facilities for food processing. 2. ed.

International Nuclear Information System (INIS)

2002-01-01

This practice describes dosimetric procedures to be followed in facility characterization, process qualification, and routine processing for electron beam and bremsstrahlung irradiation facilities for food processing to ensure that product receives an acceptable range of absorbed doses. Other procedures related to facility characterization, process qualification, and routine product processing that may influence and be used to monitor absorbed dose in the product are also discussed. Information about effective or regulatory dose limits for food products is not within the scope of this practice (see ASTM Guides F 1355 and F 1356). The electron energy range covered in this practice is from 0.3 MeV to 10 MeV. Such electrons can be generated in continuous or pulse modes. The maximum electron energy of bremsstrahlung facilities covered in this practice is 10 MeV. A photon beam can be generated by inserting a bremsstrahlung converter in the electron beam path (See ISO/ASTM Practice 51608

Radiation applications research and facilities in AECL research company

Science.gov (United States)

Iverson, S. L.

In the 60's and 70's Atomic Energy of Canada had a very active R&D program to discover and develop applications of ionizing radiation. Out of this grew the technology underlying the company's current product line of industrial irradiators. With the commercial success of that product line the company turned its R&D attention to other activities. Presently, widespread interest in the use of radiation for food processing and the possibility of developing reliable and competitive machine sources of radiation hold out the promise of a major increase in industrial use of radiation. While many of the applications being considered are straightforward applications of existing knowledge, others depend on more subtle effects including combined effects of two or more agents. Further research is required in these areas. In March 1985 a new branch, Radiation Applications Research, began operations with the objective of working closely with industry to develop and assist the introduction of new uses of ionizing radiation. The Branch is equipped with appropriate analytical equipment including HPLC (high performance liquid chromatograph) and GC/MS (gas chromatograph/mass spectrometer) as well as a Gammacell 220 and an I-10/1, one kilowatt 10 MeV electron accelerator. The accelerator is located in a specially designed facility equipped for experimental irradiation of test quantities of packaged products as well as solids, liquids and gases in various configurations. A conveyor system moves the packaged products from the receiving area, through a maze, past the electron beam at a controlled rate and finally to the shipping area. Other necessary capabilities, such as gamma and electron dosimetry and a microbiology laboratory, have also been developed. Initial projects in areas ranging from food through environmental and industrial applications have been assessed and the most promising have been selected for further work. As an example, the use of charcoal adsorbent beds to concentrate

Segmenting, positioning and market targeting in service companies

Directory of Open Access Journals (Sweden)

Kancir Rade

2004-01-01

Full Text Available Effective marketing management system in every company, including service companies, assumes existence of adequate information infrastructure which enables production of information relevant for making of different types of marketing decisions. Information based decisions are necessary in every phase of the management process, both on strategic and operative level.

Radiation processing of polymers with high energy electron beams: novel materials and processes

International Nuclear Information System (INIS)

Sarma, K.S.S.; Sabharwal, Sunil

2002-01-01

High-energy ionizing radiation available from electron beam (EB) accelerators has the ability to create extremely reactive species like free radicals or ions at room temperature or even at low temperature in any phase and in a variety of substrates without addition of external additives. This unique advantage of high energy has been utilized in the recent years to produce better quality materials in an environment friendly and cost-effective manner. The availability of high power and reliable EB accelerators has provided new tools to modify the materials and/or processes for a variety of applications. At BARC, a 2 MeV, 20 kW electron beam accelerator has been the nucleus of developing industrial applications of radiation processing in India for last 10 years. The focus has been on developing technologies that are of relevance to Indian socio-economic conditions and also provide economic benefits to the industry. In the areas of polymer processing industry, commercial success has already been achieved while for exploring its applications in the areas of food and agriculture and environment, technology demonstration plants are being set up. The current status of the programme, the new developments and future direction of radiation processing technology shall be presented in this paper. (author)

The Role of the Process Organizational Structure in the Development of Intrapreneurship in Large Companies

Directory of Open Access Journals (Sweden)

Delić Adisa

2016-12-01

Full Text Available Modern companies’ business environments have become increasingly complex, dynamic, and uncertain as a consequence of globalization and the rapid development of information communications technology. Companies are urged to increase their flexibility in order to keep their competitiveness in the global market. The affirmation of intrapreneurship becomes one of the basic ways for achieving higher adaptability and competitiveness of large companies in the modern business environment. In this context, the choice of an organizational solution that improves the development of entrepreneurial orientation and increases employee entrepreneurship and innovativeness becomes an important task for large companies. Research studies and business practices have indicated that various types of modern organizational forms enable the development of intrapreneurship. Therefore, the main aim of this paper is to identify dominant characteristics of organizational solutions and analyse their influence on the development of intrapreneurship in large companies in Bosnia and Herzegovina (BiH. The research results indicate that current organizational characteristics are not favourable for the development of intrapreneurship in large BiH companies and that improvement is necessary in order to create an enabling environment for intrapreneurship and innovativeness. Based on these findings, recommendations for appropriate organizational changes are presented that might result in a more intensive development of intrapreneurship in large BiH companies.

Falling R and D in oil companies

International Nuclear Information System (INIS)

Creusen, H.; Minne, B.

2000-01-01

During the last decade, the research expenditures of the 11 major oil companies and two specialised oil engineers have dropped worldwide. To explain this trend, this article points to an R and D race among the companies and to certain common expectations. The race is due to the absence of knowledge spillovers across the companies, because they need to keep their process innovations secret. Common expectations regarding the high risks of research for new energy sources leads to wait-and-see behaviour instead of own research. A small increase in research efficiency partly compensates for the drop in R and D

A pipeline for comprehensive and automated processing of electron diffraction data in IPLT.

Science.gov (United States)

Schenk, Andreas D; Philippsen, Ansgar; Engel, Andreas; Walz, Thomas

2013-05-01

Electron crystallography of two-dimensional crystals allows the structural study of membrane proteins in their native environment, the lipid bilayer. Determining the structure of a membrane protein at near-atomic resolution by electron crystallography remains, however, a very labor-intense and time-consuming task. To simplify and accelerate the data processing aspect of electron crystallography, we implemented a pipeline for the processing of electron diffraction data using the Image Processing Library and Toolbox (IPLT), which provides a modular, flexible, integrated, and extendable cross-platform, open-source framework for image processing. The diffraction data processing pipeline is organized as several independent modules implemented in Python. The modules can be accessed either from a graphical user interface or through a command line interface, thus meeting the needs of both novice and expert users. The low-level image processing algorithms are implemented in C++ to achieve optimal processing performance, and their interface is exported to Python using a wrapper. For enhanced performance, the Python processing modules are complemented with a central data managing facility that provides a caching infrastructure. The validity of our data processing algorithms was verified by processing a set of aquaporin-0 diffraction patterns with the IPLT pipeline and comparing the resulting merged data set with that obtained by processing the same diffraction patterns with the classical set of MRC programs. Copyright © 2013 Elsevier Inc. All rights reserved.

The future of focused electron beam-induced processing

International Nuclear Information System (INIS)

Hagen, C.W.

2014-01-01

A perspective is sketched for the field of focused electron beam-induced processing (FEBIP). The FEBIP lithography technique is compared to the very successful resist-based electron beam lithography (EBL) technique. The advantages of FEBIP over EBL are identified, the main advantage being its high spatial resolution. This will enable FEBIP to become an important lithography technique for the fabrication of devices with critical dimension in the range between 1 and 20 nm and serve as a complementary technique to EBL. It will be discussed what needs to be done to achieve this and what the potential applications are. (orig.)

Application of electron beam curing in web-offset printing

International Nuclear Information System (INIS)

Rodrigues, A.M.; Newcomb, W.T.

1984-01-01

Four years ago, the first commercial installation of an electron beam processor, coupled with a high speed web offset printing press was described. This line has been in operation since and its success demonstrates the advantages and feasibility of such an application. Just recently, another company has announced that it is using electron beam curing in its printing lines. Judging from the amount of inquiries and opportunities being actively pursued one can state that the use of electron beam systems in printing applications has come of age. This paper describes the advantages of this process, the characteristics of the equipment that are important for industrial use in a multishift environment, and addresses its economics through analysis of some major cost elements

Organigraphs: drawing how companies really work.

Science.gov (United States)

Mintzberg, H; Van der Heyden, L

1999-01-01

Walk into any organization and you will get a snapshot of the company in action--people and products moving every which way. But ask for a picture of the company and you will be given the org chart, with its orderly little boxes showing just the names and titles of managers. Now there's a more revealing way to depict the people and operations within an organization--an approach called the organigraph. The organigraph is not a chart. It's a map that offers an overview of the company's functions and the ways that people organize themselves at work. Perhaps most important, an organigraph can help managers see untapped competitive opportunities. Drawing on the organigraphs they created for about a dozen companies, authors Mintzberg and Van der Heyden illustrate just how valuable a tool the organigraph is. For instance, one they created for Electrocomponents, a British distributor of electrical and mechanical items, led managers to a better understanding of the company's real expertise--business-to-business relationships. As a result of that insight, the company wisely decided to expand in Asia and to increase its Internet business. As one manager says, "It allowed the company to see all sorts of new possibilities." With traditional hierarchies vanishing and newfangled--and often quite complex--organizational forms taking their place, people are struggling to understand how their companies work. What parts connect to one another? How should processes and people come together? Whose ideas have to flow where? With their flexibility and realism, organigraphs give managers a new way to answer those questions.

Company Strategies for Responsible Research and Innovation (RRI: A Conceptual Model

Directory of Open Access Journals (Sweden)

Ibo van de Poel

2017-11-01

Full Text Available Responsible research and innovation (RRI has become an important topic in the academic community and in policy circles, but it has not yet been systematically included in the innovation process of companies. We discuss how companies can integrate RRI into their corporate social responsibility (CSR policies and business strategy. To this end, we developed a conceptual model that links a company’s RRI strategy to its context, and that helps to translate the RRI strategy into activities that result in RRI outcomes. We also propose a process for developing company-specific RRI key performance indicators (KPIs that can support companies to measure RRI outcomes.

A Proposal of Logistic Services Innovation Strategy for a Mining Company

Directory of Open Access Journals (Sweden)

Felisa Margarita Cordova

2012-03-01

Full Text Available A logistic service innovation strategy for a mining company and their key suppliers is presented, using the win-win concept with the objective of improve its position, policies, strategic objectives and relationships between companies. The strategy allows increasing the business profitability, to diminish the operational costs and the times of negotiation and learning. The chain value of the productive process is analyzed and also the business strategies of each company in order to identify the key factors involved in the strategic alliance. Contracts negotiation between the company and its suppliers is examined by SWOT analysis, Pareto´s ABC tool and expert knowledge of the process. The strategy is applied to a mining company and its key suppliers working in the modality of strategic long term alliances.

Procedure for the Management control with process approach at the Dairy Products Company Río Zaza Sancti Spiritus.

Directory of Open Access Journals (Sweden)

Madelaine Herrera Carriles

2013-03-01

Full Text Available In this research work we propose a procedure for the management control with process approaches to quality continuing improvement approaches at the Dairy Products Company Río Zaza Sancti Spíritus. Improvement opportunities were detected after measuring economical and productive parameters of commercialization process. The procedure includes techniques and tools such as Kendall coefficient, questionnaire, SWOT matrix (Weaknesses, Threats, Strengths, Opportunities, process management, process map, flow diagrams, process chip, Pareto diagram, strategic alignment matrix, balanced scorecard and the Deming cycle. The integration of strategic deployment, the process approaches; balanced scorecard in the procedure of management control contributed to the continuous improvement of quality evaluated by means of the indicators monitoring. It was possible to lower the billing cycle to 45 days and to have an increment of 2.2 MP from the total revenues.

Influence of integrated quality management system on processing management in management and production staff’s opinion in Strauss Cafe Poland Ltd Company

Directory of Open Access Journals (Sweden)

Justyna Górna

2009-01-01

Full Text Available In the article are presented the results of the research determining the influence of the integrated quality management system on management process in the assessment of management and regular employees of Strauss Cafe Poland Ltd. According to the ISO 9001 requirements in order to effectively manage the organisation, should identify operations. The activities requiring resources and managed in order to enable the transformation of inflow into outflow should be evaluated as a process. The analysis of the gathered data shows the essential influence of the systems (QMS and HACCP on the management process in the company. The management staff emphasized the significant influence of the quality management system whereas production staff of HACCP system. Both of these groups of employees in the survey shows the beurocracy as a negative result of these systems, while positive results are improvement of image of the company and increase of both products and services quality.

An Approach for Measurement of Company Business Effectiveness

International Nuclear Information System (INIS)

Nenkova, B.; Manchev, B.; Tomov, E.

2016-01-01

Process improvement is that part of process improvement, which drives beneficial change in process performance. Improvement in results can be accomplished in many ways. One way is by improving the ways by which the results are being measured. Results can often be improved by running the process with the planned resources and executing the tasks as planned. Failures are more often the result of people not running the process as planned - they take short cuts, make mistakes, and don't take action when necessary. From organizational perspective, Performance Indicators can offer powerful insights into the status of the Company activity and processes functioning. They enable consistent tracking of objectives and strategic alignment, definition of success and critical success factors, as well as visibility into launch plans, performance, and overall quality and timeliness. Successful performance measurement system adheres to the following main principles: Measure only what is important; Focus on customer needs; Involve employees in the design and implementation of the measurement system. Performance measurement is defined as a process of evaluation of company activities performance relative to a defined goal. The basic concept of performance measurement involves: Planning and meeting operating goals; Detecting deviations from planned levels of performance and restoring performance to the planned levels, or Achieving new levels of performance. Performance measurements are very important, because they can be used for: Control - Measurements help to reduce variation; Self-assessment - Measurements can be used to assess how well the process is doing, including improvements that have been made; Continuous improvement - Measurements can be used for identification of the process trends and to determine process efficiency and effectiveness, as well as opportunities for improvement; Management assessment - without measurements there is no way to be certain that the company

Does company size matter? Validation of an integrative model of safety behavior across small and large construction companies.

Science.gov (United States)

Guo, Brian H W; Yiu, Tak Wing; González, Vicente A

2018-02-01

Previous safety climate studies primarily focused on either large construction companies or the construction industry as a whole, while little is known about whether company size has significant effects on workers' understanding of safety climate measures and relationships between safety climate factors and safety behavior. Thus, this study aims to: (a) test the measurement equivalence (ME) of a safety climate measure across workers from small and large companies; (b) investigate if company size alters the causal structure of the integrative model developed by Guo, Yiu, and González (2016). Data were collected from 253 construction workers in New Zealand using a safety climate measure. This study used multi-group confirmatory factor analyses (MCFA) to test the measurement equivalence of the safety climate measure and structure invariance of the integrative model. Results indicate that workers from small and large companies understood the safety climate measure in a similar manner. In addition, it was suggested that company size does not change the causal structure and mediational processes of the integrative model. Both measurement equivalence of the safety climate measure and structural invariance of the integrative model were supported by this study. Practical applications: Findings of this study provided strong support for a meaningful use of the safety climate measure across construction companies in different sizes. Safety behavior promotion strategies designed based on the integrative model may be well suited for both large and small companies. Copyright © 2017 National Safety Council and Elsevier Ltd. All rights reserved.

Influence of new customs procedures and logistic security standards on companies competiveness – a Croatian company case study

Directory of Open Access Journals (Sweden)

Aleksandar Erceg

2014-12-01

Full Text Available In today’s global market, companies are constantly confronted with the competition on the local, national and international level. Companies therefore use a variety of strategies and tools to become and/or remain competitive. Potential areas for cost reduction in companies are supply chain management and logistic and customs procedures. Implementation of various logistic standards in supply chain management can provide significant cost savings for the company’s daily operations and thus reduce overall costs and improve the competitiveness. Using different customs procedures and logistic standards to reduce their costs and become more competitive in the market is necessary for Croatian companies. The method of using these tools is not a one-time process and requires constant efforts. Companies therefore have to be ready to improve daily to be and remain competitive. Using a variety of modern customs procedures can save their money and time, not only through these procedures, but also through better use of their employee’s time, their own vehicles and other equipment. The paper analyzes various customs procedures and logistic standards that can help companies save time and money and improve their competitiveness. In the example of Croatian company, which uses various available procedures and standards the benefits of their use are shown. Apart from bringing savings in operations, all these procedures and standards allow the company to be better, cheaper and more attractive to buyers.

Electron beam process design for the treatment of wastes and economic feasibility of the process

Energy Technology Data Exchange (ETDEWEB)

Cleland, M R; Fernald, R A; Malcof, S R [High Voltage Engineering Corp., Burlington, MA (USA)

1984-01-01

Electron beam irradiation is a practical and economical method to disinfect liquid municipal sludges at high throughput rates. Demonstration facilities have been built in Boston and Miami with treatment capacities of 170,000 gallons per day (650 cubic meters per day) for a minimum dose of 400 kilorads. The electron treatment process is described in some detail. Capital and operating cost estimates are given for continuous sludge disinfection. Total costs for liquid sludge are $7.50 per 1000 gallons. Equivalent costs for residual sewage solids are $50.00 per metric ton. Economic comparisons are made between electron accelerators and gamma-ray sources for liquid and dewatered sludge. The possibilities of treating wastewater and drinking water with high-energy electrons are also reviewed.

Horizontal integration in the development strategy of mining companies

Directory of Open Access Journals (Sweden)

Jan Kudełko

2016-01-01

Full Text Available Integration strategy is one option in the development of mining companies and is implemented through a connection of either processes or economic entities which operate or may operate separately. Usually this strategy is carried out by companies that occupy a very strong competitive position. Considering its direction, it may be horizontal or vertical. Horizontal integration strategy stems from a desire to increase market share by an entrepreneur or create a new company based on common know-how and combined operational processes. It can be realized in an external dimension through a merger or takeover, as well as in the internal dimension based on its own resources. The external dimension is based on capital or contractual integration of a company with external economic entities performing related or conglomerate activity. The targets of such integration have a resource, a market effectiveness, or a competence nature. In the case of mining companies, it covers all important activity areas, including geology, mining, processing, environmental protection, and waste management, and is carried out with due diligence. In the internal dimension, the strategy of horizontal integration consists in consolidating the strategic targets of all business units around the company’s (corporation’s targets. The authors focused on two trends most relevant to pursuing a horizontal integration strategy, including increasing the company’s flexibility and undertaking joint activities. Flexibility consists in the potential ability of the company to adapt quickly to changed environment conditions. Joint activity includes co-operation of its respective units in terms of products, markets, and functions.

Defence electronics industry profile, 1990-1991

Science.gov (United States)

The defense electronics industry profiled in this review comprises an estimated 150 Canadian companies that develop, manufacture, and repair radio and communications equipment, radars for surveillance and navigation, air traffic control systems, acoustic and infrared sensors, computers for navigation and fire control, signal processors and display units, special-purpose electronic components, and systems engineering and associated software. Canadian defense electronics companies generally serve market niches and end users of their products are limited to the military, government agencies, or commercial airlines. Geographically, the industry is concentrated in Ontario and Quebec, where about 91 percent of the industry's production and employment is found. In 1989, the estimated revenue of the industry was $2.36 billion, and exports totalled an estimated $1.4 billion. Strengths and weaknesses of the industry are discussed in terms of such factors as the relatively small size of Canadian companies, the ability of Canadian firms to access research and development opportunities and export markets in the United States, the dependence on foreign-made components, and international competition.

Needs and Opportunities to Improve the Operational Quality of Forwarding Companies

Directory of Open Access Journals (Sweden)

Dovilė Kontautaitė

2013-04-01

Full Text Available It is essential for forwarding companies to improve their activity by improving their internal and external processes in order to provide for a client an estimated basic and added value and effectively manage the flow of information in the general logistic supply chain. The article analyses the concepts of quality management and activity process, emphasising the main process of a forwarding enterprise and the demand to optimise the activity establishing quality management systems. The scientific literature analysis assists in the provision of quality assessment indicators of forwarding companies and ascertaining quality management systems that are suitable for transport companies.Article in Lithuanian

Ultrahigh resolution focused electron beam induced processing: the effect of substrate thickness

DEFF Research Database (Denmark)

van Dorp, Willem F; Lazic, Ivan; Beyer, André

2011-01-01

It is often suggested that the growth in focused electron beam induced processing (FEBIP) is caused not only by primary electrons, but also (and even predominantly) by secondary electrons (SEs). If that is true, the growth rate for FEBIP can be changed by modifying the SE yield. Results from our ...

Secondary electron emission from plasma processed accelerating cavity grade niobium

Science.gov (United States)

Basovic, Milos

Advances in the particle accelerator technology have enabled numerous fundamental discoveries in 20th century physics. Extensive interdisciplinary research has always supported further development of accelerator technology in efforts of reaching each new energy frontier. Accelerating cavities, which are used to transfer energy to accelerated charged particles, have been one of the main focuses of research and development in the particle accelerator field. Over the last fifty years, in the race to break energy barriers, there has been constant improvement of the maximum stable accelerating field achieved in accelerating cavities. Every increase in the maximum attainable accelerating fields allowed for higher energy upgrades of existing accelerators and more compact designs of new accelerators. Each new and improved technology was faced with ever emerging limiting factors. With the standard high accelerating gradients of more than 25 MV/m, free electrons inside the cavities get accelerated by the field, gaining enough energy to produce more electrons in their interactions with the walls of the cavity. The electron production is exponential and the electron energy transfer to the walls of a cavity can trigger detrimental processes, limiting the performance of the cavity. The root cause of the free electron number gain is a phenomenon called Secondary Electron Emission (SEE). Even though the phenomenon has been known and studied over a century, there are still no effective means of controlling it. The ratio between the electrons emitted from the surface and the impacting electrons is defined as the Secondary Electron Yield (SEY). A SEY ratio larger than 1 designates an increase in the total number of electrons. In the design of accelerator cavities, the goal is to reduce the SEY to be as low as possible using any form of surface manipulation. In this dissertation, an experimental setup was developed and used to study the SEY of various sample surfaces that were treated

Secondary Electron Emission from Plasma Processed Accelerating Cavity Grade Niobium

Energy Technology Data Exchange (ETDEWEB)

Basovic, Milos [Old Dominion Univ., Norfolk, VA (United States)

2016-05-01

Advances in the particle accelerator technology have enabled numerous fundamental discoveries in 20th century physics. Extensive interdisciplinary research has always supported further development of accelerator technology in efforts of reaching each new energy frontier. Accelerating cavities, which are used to transfer energy to accelerated charged particles, have been one of the main focuses of research and development in the particle accelerator field. Over the last fifty years, in the race to break energy barriers, there has been constant improvement of the maximum stable accelerating field achieved in accelerating cavities. Every increase in the maximum attainable accelerating fields allowed for higher energy upgrades of existing accelerators and more compact designs of new accelerators. Each new and improved technology was faced with ever emerging limiting factors. With the standard high accelerating gradients of more than 25 MV/m, free electrons inside the cavities get accelerated by the field, gaining enough energy to produce more electrons in their interactions with the walls of the cavity. The electron production is exponential and the electron energy transfer to the walls of a cavity can trigger detrimental processes, limiting the performance of the cavity. The root cause of the free electron number gain is a phenomenon called Secondary Electron Emission (SEE). Even though the phenomenon has been known and studied over a century, there are still no effective means of controlling it. The ratio between the electrons emitted from the surface and the impacting electrons is defined as the Secondary Electron Yield (SEY). A SEY ratio larger than 1 designates an increase in the total number of electrons. In the design of accelerator cavities, the goal is to reduce the SEY to be as low as possible using any form of surface manipulation. In this dissertation, an experimental setup was developed and used to study the SEY of various sample surfaces that were treated

IMPACT OF THE LOSS AND THEFT OF ELECTRONIC DATA ON COMPANIES

OpenAIRE

Stefan IOVAN; Marius Bogdan DINU

2014-01-01

Crimes committed via the Internet are no longer a novelty either for authorities and companies or for the general public, including potential victims. Transshipment of the human being to the virtual environment has not left out the bad habits and the propensity t o steal of some people. On the contrary, it seems that the unprecedented development of the information technology [1] has given birth to a new category of dangerous criminals...

Different ways to organize the processes of financial administration : a field study of medium-sized Finnish companies

OpenAIRE

Nummela, Maria

2011-01-01

This research concentrates on exploring the ways how financial administration is currently organized in medium-sized companies in Finland. Decentralization, centralization and outsourcing are options that are available to different-sized companies. The study was executed as a field study in seven medium-sized Finnish companies that represent different branches. Furthermore, the research method was qualitative theme interview. As large companies have already established their financial service...

THE WAY OF PROCESSING DATA IN APPROACHING ECONOMIC APPLICATIONS

Directory of Open Access Journals (Sweden)

ADRIAN GHENCEA

2012-05-01

Full Text Available Economic Informatics originates in the industry economy and the electronic processing of information. A clear distinction is made between IT and economic informatics, and further between general and particular economic informatics (the particular economic informatics meaning administration, industrial informatics etc. Economic informatics is deemed to be an applicative science relating to the conception, working modality and representation of IT and communication systems, oriented towards companies which are using electronic computers. This paper pursues to integrate applications allowing the information systems to interconnect at informational level, by information sharing, and at service level, considering the control of the related processes in real time.

Processing scarce biological samples for light and transmission electron microscopy

Directory of Open Access Journals (Sweden)

P Taupin

2008-06-01

Full Text Available Light microscopy (LM and transmission electron microscopy (TEM aim at understanding the relationship structure-function. With advances in biology, isolation and purification of scarce populations of cells or subcellular structures may not lead to enough biological material, for processing for LM and TEM. A protocol for preparation of scarce biological samples is presented. It is based on pre-embedding the biological samples, suspensions or pellets, in bovine serum albumin (BSA and bis-acrylamide (BA, cross-linked and polymerized. This preparation provides a simple and reproducible technique to process biological materials, present in limited quantities that can not be amplified, for light and transmission electron microscopy.

Electron beam accelerators—trends in radiation processing technology for industrial and environmental applications in Latin America and the Caribbean

Science.gov (United States)

Parejo Calvo, Wilson A.; Duarte, Celina L.; Machado, Luci Diva B.; Manzoli, Jose E.; Geraldo, Aurea Beatriz C.; Kodama, Yasko; Silva, Leonardo Gondim A.; Pino, Eddy S.; Somessari, Elizabeth S. R.; Silveira, Carlos G.; Rela, Paulo R.

2012-08-01

The radiation processing technology for industrial and environmental applications has been developed and used worldwide. In Latin America and the Caribbean and particularly in Brazil there are 24 and 16 industrial electron beam accelerators (EBA) respectively with energy from 200 keV to 10 MeV, operating in private companies and governmental institutions to enhance the physical and chemical properties of materials. However, there are more than 1500 high-current electron beam accelerators in commercial use throughout the world. The major needs and end-use markets for these electron beam (EB) units are R and D, wire and electric cables, heat shrinkable tubes and films, PE foams, tires, components, semiconductors and multilayer packaging films. Nowadays, the emerging opportunities in Latin America and the Caribbean are paints, adhesives and coatings cure in order to eliminate VOCs and for less energy use than thermal process; disinfestations of seeds; and films and multilayer packaging irradiation. For low-energy EBA (from 150 keV to 300 keV). For mid-energy EBA (from 300 keV to 5 MeV), they are flue gas treatment (SO2 and NOX removal); composite and nanocomposite materials; biodegradable composites based on biorenewable resources; human tissue sterilization; carbon and silicon carbide fibers irradiation; irradiated grafting ion-exchange membranes for fuel cells application; electrocatalysts nanoparticles production; and natural polymers irradiation and biodegradable blends production. For high-energy EBA (from 5 MeV to 10 MeV), they are sterilization of medical, pharmaceutical and biological products; gemstone enhancement; treatment of industrial and domestic effluents and sludge; preservation and disinfestations of foods and agricultural products; soil disinfestations; lignocellulosic material irradiation as a pretreatment to produce ethanol biofuel; decontamination of pesticide packing; solid residues remediation; organic compounds removal from wastewater; and

Electron beam accelerators—trends in radiation processing technology for industrial and environmental applications in Latin America and the Caribbean

International Nuclear Information System (INIS)

Parejo Calvo, Wilson A.; Duarte, Celina L.; Machado, Luci Diva B.; Manzoli, Jose E.; Geraldo, Aurea Beatriz C.; Kodama, Yasko; Silva, Leonardo Gondim A.; Pino, Eddy S.; Somessari, Elizabeth S.R.; Silveira, Carlos G.

2012-01-01

The radiation processing technology for industrial and environmental applications has been developed and used worldwide. In Latin America and the Caribbean and particularly in Brazil there are 24 and 16 industrial electron beam accelerators (EBA) respectively with energy from 200 keV to 10 MeV, operating in private companies and governmental institutions to enhance the physical and chemical properties of materials. However, there are more than 1500 high-current electron beam accelerators in commercial use throughout the world. The major needs and end-use markets for these electron beam (EB) units are R and D, wire and electric cables, heat shrinkable tubes and films, PE foams, tires, components, semiconductors and multilayer packaging films. Nowadays, the emerging opportunities in Latin America and the Caribbean are paints, adhesives and coatings cure in order to eliminate VOCs and for less energy use than thermal process; disinfestations of seeds; and films and multilayer packaging irradiation. For low-energy EBA (from 150 keV to 300 keV). For mid-energy EBA (from 300 keV to 5 MeV), they are flue gas treatment (SO 2 and NO X removal); composite and nanocomposite materials; biodegradable composites based on biorenewable resources; human tissue sterilization; carbon and silicon carbide fibers irradiation; irradiated grafting ion-exchange membranes for fuel cells application; electrocatalysts nanoparticles production; and natural polymers irradiation and biodegradable blends production. For high-energy EBA (from 5 MeV to 10 MeV), they are sterilization of medical, pharmaceutical and biological products; gemstone enhancement; treatment of industrial and domestic effluents and sludge; preservation and disinfestations of foods and agricultural products; soil disinfestations; lignocellulosic material irradiation as a pretreatment to produce ethanol biofuel; decontamination of pesticide packing; solid residues remediation; organic compounds removal from wastewater; and

austenitic stainless steel by electron beam welding process

African Journals Online (AJOL)

user

Electron beam welding (EBW) is a fusion joining process that produces a ... fabrication of engineering parts with low-distortion joints, although its application to large assemblies is often restricted by the ... speed, focal point location, focal spot size, etc. ... Experimental data were collected as per central composite design and ...

Intelligent workflow driven processing for electronic mail management

African Journals Online (AJOL)

Email has become one of the most efficient means of electronics communication for many years and email management has become a critical issue due to congestion. Different client/individuals encounter problems while processing their emails due to large volume of email being received and lot of request to be replied.

Radiation-Hardened Electronics for Advanced Communications Systems

Science.gov (United States)

Whitaker, Sterling

2015-01-01

Novel approach enables high-speed special-purpose processors Advanced reconfigurable and reprogrammable communication systems will require sub-130-nanometer electronics. Legacy single event upset (SEU) radiation-tolerant circuits are ineffective at speeds greater than 125 megahertz. In Phase I of this project, ICs, LLC, demonstrated new base-level logic circuits that provide SEU immunity for sub-130-nanometer high-speed circuits. In Phase II, the company developed an innovative self-restoring logic (SRL) circuit and a system approach that provides high-speed, SEU-tolerant solutions that are effective for sub-130-nanometer electronics scalable to at least 22-nanometer processes. The SRL system can be used in the design of NASA's next-generation special-purpose processors, especially reconfigurable communication processors.

Building Design-led Ambidexterity in Big Companies

OpenAIRE

Stoimenova, Niya; de Lille, C.S.H.; Bohemia, E.; de Bont, C.; Svengren Holm, L.

2017-01-01

Organisational ambidexterity is considered a crucial capability for long term firm survival and development. However, adopting and successfully implementing it presents multiple challenges. Furthermore, despite being increasingly popular in the last two decades, the role design can play in achieving it is notably missing from the discussion. This paper analyses the attempts to accelerate the innovation pace of two large international companies in the consumer electronics and healthcare and ai...

Modeling of outpatient prescribing process in iran: a gateway toward electronic prescribing system.

Science.gov (United States)

Ahmadi, Maryam; Samadbeik, Mahnaz; Sadoughi, Farahnaz

2014-01-01

Implementation of electronic prescribing system can overcome many problems of the paper prescribing system, and provide numerous opportunities of more effective and advantageous prescribing. Successful implementation of such a system requires complete and deep understanding of work content, human force, and workflow of paper prescribing. The current study was designed in order to model the current business process of outpatient prescribing in Iran and clarify different actions during this process. In order to describe the prescribing process and the system features in Iran, the methodology of business process modeling and analysis was used in the present study. The results of the process documentation were analyzed using a conceptual model of workflow elements and the technique of modeling "As-Is" business processes. Analysis of the current (as-is) prescribing process demonstrated that Iran stood at the first levels of sophistication in graduated levels of electronic prescribing, namely electronic prescription reference, and that there were problematic areas including bottlenecks, redundant and duplicated work, concentration of decision nodes, and communicative weaknesses among stakeholders of the process. Using information technology in some activities of medication prescription in Iran has not eliminated the dependence of the stakeholders on paper-based documents and prescriptions. Therefore, it is necessary to implement proper system programming in order to support change management and solve the problems in the existing prescribing process. To this end, a suitable basis should be provided for reorganization and improvement of the prescribing process for the future electronic systems.

Dosimetry study for electron beam irradiation in radiation processing

International Nuclear Information System (INIS)

Sunaga, Hiromi; Haruyama, Yasuyuki; Takizawa, Haruki; Kojima, Takuji; Yotsumoto, Keiichi

1995-01-01

For certain critical applications such as medical device sterilization and food irradiation, accurate calibration of electron energy and absorbed dose is required to assure the quality of irradiated products. To meet this requirement, TRCRE, JAERI has carried out research and development on high dose radiation dosimetry for electron beams in the energy range used in radiation processing (0.15 - 3.0 MeV). JAERI has developed a simultaneous electron beam energy and dosimeter calibration system that consist of a total absorption calorimeter, an electron current density meter, and a stacked thin-film dosimeter set. For low energy electrons, where it is important to measure the depth-dose profile in materials with high depth resolution, we studied the feasibility of a method using Gafchromic film dosimeters. This film, which has an 8-μm thick sensitive layer, is combined with a stepped array of absorber films of the same thickness to produce a high-resolution depth-dose profile on the Gafchromic film. The depth-dose profile obtained in this manner has about five times greater resolution than conventional radiochromic film dosimetry. (author)

The process of implementing Competitive Intelligence in a company

OpenAIRE

František Bartes

2013-01-01

It is a common occurrence in business practice that the management of a company, in an effort to jump-start the function of the Competitive Intelligence unit, makes a number of mistakes and errors. Yet it is not difficult to avoid these missteps and achieve the desired level of Competitive Intelligence activities in a purposeful and effective manner. The author believes that a resolution of this problem lies in his concept of Competitive Intelligence viewed as a system application discipline ...

An Assessment of RFID Applications in Manufacturing Companies

Directory of Open Access Journals (Sweden)

Gładysz Bartłomiej

2015-12-01

Full Text Available The meaning of Cyber Physical Systems and an Internet of Things with indication of RFID position in those concepts was outlined. Research program related to assessment of RFID technology was presented. Author deducted on problems related to RFID implementations and RFID essentially for logistics of manufacturing companies. Research goals and problems were formulated. Tools, techniques, models and methods that could be utilized were proposed and discussed. Research was focused on design of a new method to support early decision making phases for RFID application in logistics of manufacturing companies. Author stated that literature and practice lacks of complex method to answer if RFID is strategically important for the company, which processes should be RFID-supported, how RFID-supported processes should be designed and if RFID-support is rational. Framework for assessment of RFID technology with illustrative example was discussed.

The role of internal audit in companies' risk management

Directory of Open Access Journals (Sweden)

Vlaović-Begović Sanja

2012-01-01

Full Text Available The internal audit area of application differs according to management needs and demands, as well as the structure and the size of a company. Besides examination of bookkeeping information, law synchronization check, criminal action and mistakes discoveries, internal audit is more and more directed towards risk management process in order to respond to the demands of uncertain business and to secure adequate business decisions making for management. This paper examines the role of internal audit in companies' risk management that is represented in examination and evaluation of risk management processes, with the aim of decreasing risk to an acceptable level for a company. Besides that, internal audit can support the management in configuration and establishing more efficient, improved risk management process. In order to ensure independence and objectiveness of internal audit operation, activities and responsibilities of management and internal audit are clearly defined.

Adoption of IFRS/IAS impacting the companies

Directory of Open Access Journals (Sweden)

Michaela Baranová

2013-11-01

Full Text Available In recent time, there were done marked changes in IAS/IFRS, changes in existing rules. Fifteen standards of IAS have been amended just before the end of 2003 and in course of the first quarter of the year 2004 updating of other standards IAS has been done. The requirement of changes hangs together, among others, also with the recent affairs about the bankruptcies of big companies. In this connection, accelerated and turning changes are proceeding in EU. Since 2005 every EU listed company has to prepare the consolidated financial statements in accordance with IFRS/IAS. Vast survey on the impacts of IFRS adoption was carried by Mazars in 2005. 25 Czech companies have been also interviewed within the study. These Czech companies have exhibit a strong mastery and readiness for the conversion and transition process. Such a summary is quite unwonted in a number of perspectives. But the aim of the author is not to question the study. In the Czech environment, the specific facts in the field of financial reporting and accounting are given. Following these specifics, the truth is that preparing the financial statements in accordance with IFRS/IAS brings undoubtedly valuation and technical entanglements for which the process is costly.

Best Practices in Brazilian Companies

Directory of Open Access Journals (Sweden)

Catia dos Reis Machado

2013-04-01

Full Text Available Competitive intelligence (CI is a systematic and ethical collection, analysis, dissemination and management of information about the external environment that may affect the plans, decisions and operations of the organization. Knowledge management (KM can be seen as a tool to promote organizational knowledge through the use of activities designed to identify, create, store, share and use knowledge. Companies face a challenge in the era of knowledge, it is the extraction and management of knowledge produced by people in the organization. CI and KM combined generates organizational intelligence. The exploratory study, based on literature and multicase study, we sought to identify best practices in processes of CI and KM in Brazilian companies. We identified practices related to the CI design process, the stages of the CI, the use of networks, and knowledge management. We also identified, points of attention on the internal/external organizational environment.

Radiation processing with the Messina electron linac

International Nuclear Information System (INIS)

Auditore, L.; Barna, R.C.; De Pasquale, D.; Emanuele, U.; Loria, D.; Morgana, E.; Trifiro, A.; Trimarchi, M.

2008-01-01

In the last decades radiation processing has been more and more applied in several fields of industrial treatments and scientific research as a safe, reliable and economic technique. In order to improve existing industrial techniques and to develop new applications of this technology, at the Physics Department of Messina University a high power 5 MeV electron linac has been studied and set-up. The main features of the accelerating structure will be described together with the distinctive features of the delivered beam and several results obtained by electron beam irradiations, such as improvement of the characteristics of polymers and polymer composite materials, synthesis of new hydrogels for pharmaceutical and biomedical applications, reclaim of culture ground, sterilization of medical devices, development of new dosimeters for very high doses and dose rates required for monitoring of industrial irradiations

Studies of the electron-impact double-ionisation process in magnesium using coincidence techniques

International Nuclear Information System (INIS)

Ford, M.J.

1998-01-01

This article will review recent measurements of the electron-impact double-ionisation of atomic magnesium. Results for the resonant Auger double-ionisation process with coincident detection of all three outgoing electrons, the (e, 3e) experiment, and for the direct double-ionisation process where only two outgoing electrons are detected, the (e, (3 -1)e) experiment, will be discussed. The results are analysed with reference to ionisation mechanisms and comparisons are made with calculated double-ionisation cross sections. Copyright (1998) CSIRO Australia

Consequences of Strategic Choices within an e-Procurement Implementation Process -From an Actor Network Perspective

DEFF Research Database (Denmark)

Krag, Lotte; Thomsen, Mette; Jensen, Tina Blegind

2004-01-01

have to be made in order to ensure the success of the implementation in terms of the technical aspects, the business model and the organisation. This article deals with three strategic choices made by the management in the case company, a large European medical company, regarding the process...... of implementing an e-Procurement system - more specifically, an Enterprise Buyer Professional (EBP) module in SAP R/3 for commercial purchasing. These strategic choices are (1) outsourcing the electronic catalogue of the EBP system to an electronic market place, (2) constituting a change management group...... for the implementation, and (3) allying with an external partner in the implementation process. The strategic choices are the basis of a qualitative analysis using an Actor Network Theory (ANT) perspective where focus is on three aspects: Delegation, black box and enrolment. In this regard, strategies for delegating...

Current status and future perspectives of electron interactions with molecules, clusters, surfaces, and interfaces [Workshop on Fundamental challenges in electron-driven chemistry; Workshop on Electron-driven processes: Scientific challenges and technological opportunities

Energy Technology Data Exchange (ETDEWEB)

Becker, Kurt H.; McCurdy, C. William; Orlando, Thomas M.; Rescigno, Thomas N.

2000-09-01

This report is based largely on presentations and discussions at two workshops and contributions from workshop participants. The workshop on Fundamental Challenges in Electron-Driven Chemistry was held in Berkeley, October 9-10, 1998, and addressed questions regarding theory, computation, and simulation. The workshop on Electron-Driven Processes: Scientific Challenges and Technological Opportunities was held at Stevens Institute of Technology, March 16-17, 2000, and focused largely on experiments. Electron-molecule and electron-atom collisions initiate and drive almost all the relevant chemical processes associated with radiation chemistry, environmental chemistry, stability of waste repositories, plasma-enhanced chemical vapor deposition, plasma processing of materials for microelectronic devices and other applications, and novel light sources for research purposes (e.g. excimer lamps in the extreme ultraviolet) and in everyday lighting applications. The life sciences are a rapidly advancing field where the important role of electron-driven processes is only now beginning to be recognized. Many of the applications of electron-initiated chemical processes require results in the near term. A large-scale, multidisciplinary and collaborative effort should be mounted to solve these problems in a timely way so that their solution will have the needed impact on the urgent questions of understanding the physico-chemical processes initiated and driven by electron interactions.

The linkage between knowledge management practices and company Performance: Empirical evidence

Directory of Open Access Journals (Sweden)

Nausheen Syed

2013-03-01

Full Text Available Purpose: This study explores the linkage between Knowledge management practices and company performance. Keeping in view the theoretical and empirical importance, the present study examines the predicting linkage of Knowledge management practices (sharing of best practices and building of consistent process, continues employee learning, effective management of knowledge, innovative culture development, and management of core competencies with company performance.Methodology: The study was carried out on purposively selected sample of 412 employees at different managerial positions. They were administered questionnaires including Knowledge Management Practices and company performance. Data was operated by using SPSS version 20.Correlation and regression analysis was done to establish the relationship between various Knowledge management practices and company performance.Findings: Results of this study illustrated that all selected Knowledge management were positively related to company performance. Based on the findings, and management of core competencies was the strongest predictor of company performance, followed by innovative culture development, effective management of knowledge and sharing of best practices and building of consistent process, continues employee learning.Research limitations/implications: The paper focuses on examining the perceptual impacts of Knowledge management (KM practices on company performance. The interpretation of results should be taken with caution.Value: The aim of this research is to investigate the relationship between Knowledge management and company performance, study the importance of Knowledge management as a source of sustainable competitive advantages for companies and to investigate how the introduction of Knowledge management practices facilitates company performance to improve. The practices that have a more positive influence on company performance are also discussed.

Analysis of Investment IT Planning on Logistic Company Using COBIT 5

Science.gov (United States)

Fachri Pane, Syafrial; Maulana Awangga, Rolly; Nuraini, Rd.; Fathonah, Siti

2018-04-01

IT Investment planning to review goals business strategy development needs to support IT governance. Planning its investments will be assessed with a framework is issued by ISACA that COBIT 5 focus on domain EDM, APO, BAI, and MEA. Mapping from framework COBIT 5 with Val IT lead nine domain consisting of EDM01, EDM02, APO01, APO02, APO05, APO06, APO07, BAI01, and MEA01. Article search google using RACI diagram generating mapping organisation telecoms and authority structures for the review identify respondents from any domain. Under selected area be used to review counting process capability level, and for a discussion of development, priorities make recommendations shall perform in accordance process needs PT.XYZ logistics company. The translating process capability level determined by the company prior currently at on level 4. The capability level domain process in the EDM is level 4, while at domain APO, BAI, and MEA are on level 3 and gap on APO, BAI, and MEA. The company recommendation domain subscription APO, BAI, and MEA to increase the capabilities of the rate review process to achieve the targets that have can determine the company.

Analytical tools and functions of GIS in the process control and decision support of mining company

Directory of Open Access Journals (Sweden)

Semrád Peter

2001-12-01

calculate their total quantity of reserves and distance and network analysis (modelling protection pillars as buffer zones for operating objects above ground, time calculation for transport of mineral resource, using optimal routes combined with cost calcultion, from the analytical apparatus and functions of GIS used in the process control and decision support of mining company.Modern mining is ranked to the specific group of fields with high information intensity. Because of high financial demands of the mine processes and technologies, the basical strategy of all mining companies is the utilization of information technologies for the reduction of expenses. Implementation of GIS in this area is, according to their options and functions, ideal.

Problems with Cash and Other Non-Operating Assets Value in the Process of Valuing Company

Directory of Open Access Journals (Sweden)

Piotr Szczepankowski

2007-12-01

Full Text Available In economic practice the process of valuing enterprises is based on potential earnings from companies operating assets ñ operating fixed assets and operating working capital. Cash and other non-operating assets (mainly financial are treated as unproductive, non-income assets. Eventually, in process of pricing their current, accounting value is added to income value of enterprise or cash is treated as source for quick covering the debts of firm, what of course indirectly improve for better value of equity (the lower financial risk. Not taking into account the profitable influence of cash value and other non-operating assets can negatively affect on result of final value of enterprise, reducing it. In the article two alternative approaches (separate and inclusive of cash value is presented. Also main determinants of estimating value of cash are described as well as potential threats of its valuation.

A new process of electron beam refining of niobium

International Nuclear Information System (INIS)

Pinatti, D.G.

1981-01-01

A review of thermodynamic equilibrium, the kinetic theory and experimental results of the metal-gas interaction in refractory metals is presented. N 2 , H 2 and CO absorption and desorption take place by a reversible process while O 2 takes place by a irreversible process with atom absorption and metal oxide desorption. A new technology of electron beam refining of Niobium is proposed based on four points: 1) preparation of the aluminothermic reduced electrode, 2) zone refining in the first melt, 3) kinetic theory of refining in the following melts and 4) design of a compact furnace. Experimental results in a pilot plant of 300 KW have shown complete agreement with the proposed technology yielding a productivity 2.4 times larger than the value predicted by the conventional technology of electron beam refining of Niobium. (Author) [pt

Intra-organisational accounting during negotiation processes for inter-organisational control

DEFF Research Database (Denmark)

Jakobsen, Morten

. The study concludes that an important role of management accounting is to reveal the intra-organisational cost consequences of proposals made by suppliers during negotiation processes. Thereby cost information becomes an integrated part of the counter-proposals generated and actively used during......To date the literature on management and management accounting within inter-organisational relationships has mainly focussed on managing the interface between the supplier and the buyer. In contrast to most previous research, this study examines the internal practices of a company engaged in inter......-organisational relationships. It addresses the question of how intra-organisational management accounting practices affect the ability to conduct inter-organisational relationships. A qualitative case study is used to gather information from an electronics company. The company enters its inter-organisational relationships...

How to use innovations for company growth

OpenAIRE

Melicharová, Kristýna

2011-01-01

The purpose of this paper is to identify the key characteristics of successful innovation, analyse the innovation process in Unilever and provide set of recommendations for the company. This paper addresses a key question of current business -- how to achieve growth of a company via innovation. The thesis is based on the already published research for identifying the best practices in dealing with innovation, survey with strategic innovation leaders in HHC Unilever, interviews with employees ...

Real-Time Digital Signal Processing Based on FPGAs for Electronic Skin Implementation †

Directory of Open Access Journals (Sweden)

Ali Ibrahim

2017-03-01

Full Text Available Enabling touch-sensing capability would help appliances understand interaction behaviors with their surroundings. Many recent studies are focusing on the development of electronic skin because of its necessity in various application domains, namely autonomous artificial intelligence (e.g., robots, biomedical instrumentation, and replacement prosthetic devices. An essential task of the electronic skin system is to locally process the tactile data and send structured information either to mimic human skin or to respond to the application demands. The electronic skin must be fabricated together with an embedded electronic system which has the role of acquiring the tactile data, processing, and extracting structured information. On the other hand, processing tactile data requires efficient methods to extract meaningful information from raw sensor data. Machine learning represents an effective method for data analysis in many domains: it has recently demonstrated its effectiveness in processing tactile sensor data. In this framework, this paper presents the implementation of digital signal processing based on FPGAs for tactile data processing. It provides the implementation of a tensorial kernel function for a machine learning approach. Implementation results are assessed by highlighting the FPGA resource utilization and power consumption. Results demonstrate the feasibility of the proposed implementation when real-time classification of input touch modalities are targeted.

Corporate ergonomics programme at Ford Motor Company.

Science.gov (United States)

Joseph, Bradley S

2003-01-01

The use of ergonomic principles in automobile assembly and manufacturing operations has become an important part of a comprehensive health and safety process as well as an integral part of the engineering systems. Ford Motor Company has developed an ergonomics process to manage issues related to injury and illness (e.g., musculoskeletal diseases) and to ensure the appropriate use of human resources on the plant floor. The ergonomics programme uses joint labour and management teams to identify and evaluate jobs and develop and implement solutions. This paper summarises the efforts of the Ford Motor Company in implementing and maintaining the programme. Key strategies are outlined that provide important links to internal organisational units that are critical to fully utilise the ergonomics process. In addition, the paper outlines differences between proactive and reactive efforts and shows the importance of using the information generated by the initiatives for process improvement.

Digital processing of ionospheric electron content data

Science.gov (United States)

Bernhardt, P. A.

1979-01-01

Ionospheric electron content data contain periodicities that are produced by a diversity of sources including hydromagnetic waves, gravity waves, and lunar tides. Often these periodicities are masked by the strong daily variation in the data. Digital filtering can be used to isolate the weaker components. The filtered data can then be further processed to provide estimates of the source properties. In addition, homomorphic filtering may be used to identify nonlinear interactions in the ionosphere.

IMPROVEMENT OF KEY PROCESSES THROUGH THE ANALYSIS OF VALUE ADDED IN TECHNOLOGY- BASED COMPANIES A SINGLE PROJECT PRODUCTIONS OF THE WATER SECTOR IN CUBA

Directory of Open Access Journals (Sweden)

Reina Maylín, Hernández Oro

2012-01-01

Full Text Available In this paper, we present the main results of research designed to improve key business processes, using a procedure designed for this purpose, and which includes among its main stages, the analysis of value added by activity, adapting to technology based companies’ productions by one of the water sector project in Cuba. The procedure consistently combines different techniques such as multi-criteria decision analysis for selection of the key processes and analysis of value added by activity to identify key processes to improve and identify opportunities for improvement. The main results are able to identify, classify and relate the processes taking place in the organization, and represent them in a process map, and then determine the key processes for improvement, based on the analysis of value added at each process of each of the activities in it. Derived from the results obtained are proposed and implemented a set of organizational improvements had a positive economic impact for the company under study, allowing a positive conclusion on the feasibility of implementation, flexibility and robustness of the procedure developed in technology-based companies single project productions of the water sector in Cuba to support their business management.

Power balance equation in electron beam evaporation process

International Nuclear Information System (INIS)

Blumenfeld, L.; Soubbaramayer.

1994-01-01

The aim of the paper is to solve the equation giving the total power of the gun, used in the electron beam evaporation process, in terms of the power used to generated the vapor stream and the three main power losses due to three parasite phenomena: turbulent thermal convection in the molten pool, electron back scattering and heat radiation from the vapor emitting surface. Scaling laws are first reviewed and results are given with the example of the evaporation of aluminium with a 5 kW axisymmetric gun working in steady state mode. The influence of an applied magnetic field on the evaporation rate is also examined. 5 refs., 3 figs., 1 tab

Waste Measurement Techniques For Lean Companies

Directory of Open Access Journals (Sweden)

Maciej Pieńkowski

2014-12-01

Full Text Available The paper is dedicated to answer the problem of measuring waste in companies, which are implementing Lean Manufacturing concept. Lack of complex identification, quantification an visualization of waste significantly impedes Lean transformation efforts. This problem can be solved by a careful investigation of Muda, Muri and Mura, which represent the essence of waste in the Toyota Production System. Measuring them facilitates complete and permanent elimination of waste in processes. The paper introduces a suggestion of methodology, which should enable company to quantify and visualize waste at a shop floor level.

Ankara National Textiles [Turkish] Incorporated Company (1916-1930

Directory of Open Access Journals (Sweden)

M. Bülent Varlık

2014-06-01

Full Text Available This study aims to provide brief information on the foundation, activities and closing down of Ankara National Textiles Incorporated Company, which was founded by a group of local tradesmen in Ankara within the scope of the “National Economy Policy” implemented by the Union and Progress Association. The aforementioned local tradesmen undertook the first steps to establish a factory in mid-1913, and as a result of these efforts, the aforementioned incorporated Company was founded in 1916. This Company, probably due to a low quality production, was closed down, possibly around the years 1921-1922. In 1925, a reconstruction process was initiated with the intervention of the politics and bureaucracy of Ankara, and the capital of the Company was increased. However, these attempts failed and finally, the Company was closed down in 1928. The factory was acquired by Türkiye İş Bankası in 1930, and after the endeavors, it continued its activities as a new company under the name Yün-İş.

Community-company relations in gold mining in Ghana.

Science.gov (United States)

Garvin, Theresa; McGee, Tara K; Smoyer-Tomic, Karen E; Aubynn, Emmanuel Ato

2009-01-01

As a result of Structural Adjustment Programme from the 1980s, many developing countries have experienced an increase in resource extraction activities by international and transnational corporations. The work reported here examines the perceived impacts of gold mining at the community level in the Wassa West District of Ghana, Africa and discusses those perceived impacts in the context of globalization processes and growing multinational corporate interest in Corporate Social Responsibility (CSR). Interview data compared community members' perceptions with those of company representatives in three communities. The results indicate that communities held companies responsible for a series of economic, social, and environmental changes. While recognizing some of the benefits brought by the mines, communities felt that the companies did not live up to their responsibility to support local development. Companies responded by denying, dismissing concerns, or shifting blame. Findings from this work show that lack of engagement and action by government agencies at all levels resulted in companies acting in a surrogate governmental capacity. In such situations, managing expectations is key to community-company relations.

EFFECTIVE CONTROL SYSTEM OF THE INTEGRATED INDUSTRIAL COMPANY

Directory of Open Access Journals (Sweden)

K. A. Dyundik

2015-01-01

Full Text Available In article the organizational and administrative structure of the integrated metallurgical company is investigated. It is shown that linearly – a staff control system to become a limiting factor in its development. Management of transformations represents purposeful translation process of the integrated metallurgical company in a new qualitative state. The purpose . The subject of the article is to analyze the organization of management, to improve it on the basis of a new conceptual approach to the modernization of the control system integrated steel companies and the allocation of the subsystems.Methodology. The methodological basis of this article are the comparative analysis methods.The Results. Studied approaches to the development of integrated management of the metallurgical company, the possibility of change.Conclusions / signifi cance. Management development in an integrated steel company requires in-depth study of existing internal operating conditions and specifi cs of the company, as well as the planning and implementation of measures to improve its receptivity to innovation.

Make your company a talent factory.

Science.gov (United States)

Ready, Douglas A; Conger, Jay A

2007-06-01

Despite the great sums of money companies dedicate to talent management systems, many still struggle to fill key positions - limiting their potential for growth in the process. Virtually all the human resource executives in the authors' 2005 survey of 40 companies around the world said that their pipeline of high-potential employees was insufficient to fill strategic management roles. The survey revealed two primary reasons for this. First, the formal procedures for identifying and developing next-generation leaders have fallen out of sync with what companies need to grow or expand into new markets. To save money, for example, some firms have eliminated positions that would expose high-potential employees to a broad range of problems, thus sacrificing future development opportunities that would far outweigh any initial savings from the job cuts. Second, HR executives often have trouble keeping top leaders' attention on talent issues, despite those leaders' vigorous assertions that obtaining and keeping the best people is a major priority. If passion for that objective doesn't start at the top and infuse the culture, say the authors, talent management can easily deteriorate into the management of bureaucratic routines. Yet there are companies that can face the future with confidence. These firms don't just manage talent, they build talent factories. The authors describe the experiences of two such corporations - consumer products icon Procter & Gamble and financial services giant HSBC Group -that figured out how to develop and retain key employees and fill positions quickly to meet evolving business needs. Though each company approached talent management from a different direction, they both maintained a twin focus on functionality (rigorous talent processes that support strategic and cultural objectives) and vitality (management's emotional commitment, which is reflected in daily actions).

Multiple electron generation in a sea of electronic states

Science.gov (United States)

Witzel, Wayne; Shabaev, Andrew; Efros, Alexander; Hellberg, Carl; Verne, Jacobs

2009-03-01

In traditional bulk semiconductor photovoltaics (PVs), each photon may excite a single electron-hole, wasting excess energy beyond the band-gap as heat. In nanocrystals, multiple excitons can be generated from a single photon, enhancing the PV current. Multiple electron generation (MEG) may result from Coulombic interactions of the confined electrons. Previous investigations have been based on incomplete or over-simplified electronic-state representations. We present results of quantum simulations that include hundreds of thousands of configuration states and show how the complex dynamics, even in a closed electronic system, yields a saturated MEG effect on a femtosecond timescale. Sandia is a multiprogram laboratory operated by Sandia Corporation, a Lockheed Martin Company, for the United States Department of Energy's National Nuclear Security Administration under contract DE-AC04-94AL85000.

Implementation of the Quality Management System in the telecommunications companies

OpenAIRE

Menshikova Ekaterina; Khazanov Oleg; Styazhkin Mark

2016-01-01

This article describes the advantages of the implementing of the quality management system based on ISO 9001 in the telecommunications companies. The stages of the implementation of the quality management system in the telecommunications companies are discussed. The map of the main process and criteria of processes is developed. The expediency of implementing the quality management system based on the requirements of ISO 9001 in Telecommunications is showed.

The Evaluation of Company's Intangible Assets' influence for Business Value

OpenAIRE

Savickaitė, Živilė

2014-01-01

Mismeasurement of intangible assets in a company may result in high costs and loss of its competitiveness and position in the market. Conventional evaluation methods are not able to identify reliably intangible intensive business value because of such assets specificity. Therefore, the business assessment process adjustment, making it comprehensive and including the intangible asset valuation methods is a critical process that allows to evaluate companies better and increases business managem...

Organic ice resists for 3D electron-beam processing: Instrumentation and operation

DEFF Research Database (Denmark)

Tiddi, William; Elsukova, Anna; Beleggia, Marco

2018-01-01

Organic vapors condensed into thin layers of ice on the surface of a cold substrate are exposed with an electron beam to create resist patterns for lithography applications. The entire spin- and development-free lithography process requires a single custom instrument. We report the design, material...... choice, implementation and operation of this apparatus. It is based on a scanning electron microscope fitted with an electron beam control system that is normally used for electron beam lithography in a multi-user open-access laboratory. The microscope was also equipped with a gas injection system......, a liquid nitrogen cooled cryostage, a temperature control system, and a load-lock. Three steps are required to initialize the apparatus for organic ice resist processing, and two steps are required to restore the apparatus for routine multi-user operations. Five steps are needed to create organic ice...