Impact of cultivar selection and process optimization on ethanol yield from different varieties of sugarcane

Science.gov (United States)

2014-01-01

Background The development of ‘energycane’ varieties of sugarcane is underway, targeting the use of both sugar juice and bagasse for ethanol production. The current study evaluated a selection of such ‘energycane’ cultivars for the combined ethanol yields from juice and bagasse, by optimization of dilute acid pretreatment optimization of bagasse for sugar yields. Method A central composite design under response surface methodology was used to investigate the effects of dilute acid pretreatment parameters followed by enzymatic hydrolysis on the combined sugar yield of bagasse samples. The pressed slurry generated from optimum pretreatment conditions (maximum combined sugar yield) was used as the substrate during batch and fed-batch simultaneous saccharification and fermentation (SSF) processes at different solid loadings and enzyme dosages, aiming to reach an ethanol concentration of at least 40 g/L. Results Significant variations were observed in sugar yields (xylose, glucose and combined sugar yield) from pretreatment-hydrolysis of bagasse from different cultivars of sugarcane. Up to 33% difference in combined sugar yield between best performing varieties and industrial bagasse was observed at optimal pretreatment-hydrolysis conditions. Significant improvement in overall ethanol yield after SSF of the pretreated bagasse was also observed from the best performing varieties (84.5 to 85.6%) compared to industrial bagasse (74.5%). The ethanol concentration showed inverse correlation with lignin content and the ratio of xylose to arabinose, but it showed positive correlation with glucose yield from pretreatment-hydrolysis. The overall assessment of the cultivars showed greater improvement in the final ethanol concentration (26.9 to 33.9%) and combined ethanol yields per hectare (83 to 94%) for the best performing varieties with respect to industrial sugarcane. Conclusions These results suggest that the selection of sugarcane variety to optimize ethanol

Measurements of fission yields

International Nuclear Information System (INIS)

Denschlag, H.O.

2000-01-01

After some historical introductory remarks on the discovery of nuclear fission and early fission yield determinations, the present status of knowledge on fission yields is briefly reviewed. Practical and fundamental reasons motivating the pursuit of fission yield measurements in the coming century are pointed out. Recent results and novel techniques are described that promise to provide new interesting insights into the fission process during the next century. (author)

Technological yields of sources for radiation processing; Wydajnosci technologiczne zrodel do obrobki radiacyjnej

Energy Technology Data Exchange (ETDEWEB)

Zagorski, Z.P. [Institute of Nuclear Chemistry and Technology, Warsaw (Poland)

1993-12-31

The present report is prepared for planners of radiation processing of any material. Calculations are focused on accelerators of electrons, divided into two groups: versatile linacs of energy up to 13 MeV, and accelerators of lower energy, below 2 MeV, of better energy yield but of limited applications. The calculations are connected with the confrontation of the author`s technological expectations during the preparation of the linac project in the late `60s, with the results of 25 years of exploitation of the machine. One has to realize that from the 200 kW input power from the mains, only 5 kW of bent and scanned beam is recovered on the conveyor. That power is only partially used for radiation induced phenomena, because of the demanded homogeneity of the dose, of the mode of packing of the object and its shape, of edges of the scanned area and in the spaces between boxes, and of loses during the idle time due to the tuning of the machine and dosimetric operations. The use of lower energy accelerators may be more economical than that of linacs in case of objects of specific type. At the first stage already, that is of the conversion of electrical power into that of low energy electron beam, the yield is 2-3 times better than in the case of linacs. Attention has been paid to the technological aspects of electron beam conversion into the more penetrating Bremsstrahlung similar to gamma radiation. The advantages of technologies, which make possible a control of the shape of the processed object are stressed. Special attention is focused to the relation between the yield of processing and the ratio between the maximum to the minimum dose in the object under the irradiation. (author). 14 refs, 14 figs.

Customization of copolymers to optimize selectivity and yield in polymer-driven antibody purification processes.

Science.gov (United States)

Capito, Florian; Skudas, Romas; Stanislawski, Bernd; Kolmar, Harald

2013-01-01

This manuscript describes customization of copolymers to be used for polymer-driven protein purification in bioprocessing. To understand how copolymer customization can be used for fine-tuning, precipitation behavior was analyzed for five target antibodies (mAbs) and BSA as model impurity protein, at ionic strength similar to undiluted cell culture fluid. In contrast to the use of standardized homopolymers, customized copolymers, composed of 2-acrylamido-2-methylpropane sulfonic acid (AMPS) and 4-(acryloylamino)benzoic acid (ABZ), exhibited antibody precipitation yields exceeding 90%. Additionally, copolymer average molecular weight (Mw ) was varied and its influence on precipitation yield and contaminant coprecipitation was investigated. Results revealed copolymer composition as the major driving force for precipitation selectivity, which was also dependent on protein hydrophobicity. By adjusting ABZ content and Mw of the precipitant for each of the mAbs, conditions were found that allowed for high precipitation yield and selectivity. These findings may open up new avenues for using polymers in antibody purification processes. © 2013 American Institute of Chemical Engineers.

Investigation of the yield process by deformation luminescence of X-ray irradiated KCl:Ca2+

International Nuclear Information System (INIS)

Nakamura, S.; Ida, K.; Ohgaku, T.

2011-01-01

It is found that deformation luminescence gives us information about the microscopic yield process of X-ray irradiated KCl:Ca 2+ . The stress-strain curve has a macroscopic yield point. But we find that luminescence appears to start before the macroscopic yield. This means that dislocation begin to move before the macroscopic yield because deformation luminescence is attributed to radiation-induced dislocation motion. The beginning of luminescence is considered to be the microscopic yield. Investigating the dependence of microscopic yield stress on strain rate and impurity concentration gives us additional information. The activation volume obtained from the dependence of microscopic yield stress on strain rate is comparable to the value estimated from the concentration of impurity. Then the dislocation starts to move overcoming impurity-vacancy dipoles as obstacles to dislocation motion. The dislocation density starts to increase at the microscopic yield point and then sharply increases to the macroscopic yield.

Precise measurement of {gamma}(K{yields}e {nu}({gamma}))/{gamma}(K{yields}{mu} {nu}({gamma})) and study of K{yields}e {nu} {gamma}

Energy Technology Data Exchange (ETDEWEB)

Ambrosino, F.; Massarotti, P.; Meola, S.; Napolitano, M. [Dipartimento di Scienze Fisiche dell' Universita ' ' Federico II' ' , Napoli (Italy); INFN Sezione di Napoli, Napoli (Italy); Antonelli, A.; Antonelli, M.; Bencivenni, G.; Bloise, C.; Bossi, F.; Capon, G.; Capussela, T.; Ciambrone, P.; De Lucia, E.; De Simone, P.; Dreucci, M.; Felici, G.; Gatti, C.; Giovannella, S.; Jacewicz, M.; Lanfranchi, G.; Miscetti, S.; Moulson, M.; Murtas, F.; Palutan, M.; Santangelo, P.; Sciascia, B.; Sibidanov, A.; Spadaro, T.; Venanzoni, G. [Laboratori Nazionali di Frascati dell' INFN, Frascati (Italy); Archilli, F. [Dipartimento di Fisica dell' Universita ' ' Tor Vergata' ' , Rome (Italy); INFN Sezione di Roma Tor Vergata, Rome (Italy); Beltrame, P.; Denig, A.; Mueller, S. [Johannes Gutenberg-Universitaet, Institut fuer Kernphysik, Mainz (Germany); Bini, C.; De Santis, A.; De Zorzi, G.; Di Domenico, A.; Fiore, S.; Franzini, P.; Gauzzi, P. [Dipartimento di Fisica dell' Universita ' ' La Sapienza' ' , Rome (Italy); INFN Sezione di Roma, Rome (Italy); Bocchetta, S.; Ceradini, F.; Di Micco, B.; Nguyen, F. [Dipartimento di Fisica dell' Universita ' ' Roma Tre' ' , Rome (Italy); INFN Sezione di Roma Tre, Rome (Italy); Branchini, P.; Graziani, E.; Passeri, A.; Tortora, L. [INFN Sezione di Roma Tre, Rome (Italy); Capriotti, D. [Dipartimento di Fisica dell' Universita ' ' Roma Tre' ' , Rome (Italy); Di Donato, C. [INFN Sezione di Napoli, Napoli (Italy); Kulikov, V. [Institute for Theoretical and Experimental Physics, Moscow (Russian Federation); Lee-Franzini, J. [Laboratori Nazionali di Frascati dell' INFN, Frascati (Italy); State University of New York, Physics Department, Stony Brook (United States); Martini, M.; Patera, V.; Versaci, R. [Laboratori Nazionali di Frascati dell' INFN, Frascati (Italy); Dipartimento di Energetica dell' Universita ' ' La Sapienza' ' , Rome (Italy); Valente, P. [INFN Sezione di Roma, Rome (Italy)

2009-12-15

We present a precise measurement of the ratio R{sub K}={gamma}(K{yields}e{nu}({gamma}))/{gamma}(K{yields}{mu}{nu}({gamma})) and a study of the radiative process K{yields}e{nu}{gamma}, performed with the KLOE detector. The results are based on data collected at the Frascati e{sup +}e{sup -} collider DA {phi}NE for an integrated luminosity of 2.2 fb{sup -1}. We find R{sub K}=(2.493{+-}0.025{sub stat}{+-}0.019{sub syst}) x 10{sup -5}, in agreement with the Standard Model expectation. This result is used to improve constraints on parameters of the Minimal Supersymmetric Standard Model with lepton flavor violation. We also measured the differential decay rate d {gamma}(K{yields}e{nu}{gamma})/dE{sub {gamma}} for photon energies 10Results are compared with predictions from theory. (orig.)

Supplementary effects of higher levels of various disaccharides on processing yield, quality properties and sensory attributes of Chinese - style pork jerky

Directory of Open Access Journals (Sweden)

Chih-Ming Chen

2017-12-01

Full Text Available Objective This study evaluated the supplementary effect of higher concentrations of various disaccharides on processing yield, major physicochemical properties, and sensory attributes of Chinese-style pork jerky (CSPJ. Methods CSPJ samples were prepared by marinating sliced ham (4 mm with three dissaccharides, including sucrose, lactose, and maltose, at 0%, 15%, 18%, 21%, and 24%. Subsequently, the CSPJ samples were dried and roasted. The moisture content, water activity, crude protein, moisture-to-protein ratio, pH, processing yield, shear force, color, and sensory attributes of the CSPJ samples were evaluated. Results The quality characteristics of CSPJ samples prepared with sucrose were more acceptable. By contrast, CSPJ samples prepared with lactose showed the lowest scores. However, the processing yield and moisture content were the highest for CSPJ samples prepared with lactose, which may be associated with improved benefits for cost reduction. Furthermore, sucrose and lactose supplementation resulted in contrasting quality characteristics; for example, CSPJ samples with sucrose and maltose supplementation had higher sensory scores for color than samples with lactose supplementation. Additionally, most quality characteristics of CSPJ samples with sucrose supplementation contrasted with those of the samples with lactose supplementation; for example, the samples with sucrose supplementation had higher scores for sensory attributes than those with lactose supplementation. Conclusion Sucrose supplementation up to 21% to 24% was associated with the highest overall acceptability scores (5.19 to 5.80, enhanced quality characteristics, increased processing yield, and reduced production cost.

Influence of raw milk quality on processed dairy products: How do raw milk quality test results relate to product quality and yield?

Science.gov (United States)

Murphy, Steven C; Martin, Nicole H; Barbano, David M; Wiedmann, Martin

2016-12-01

This article provides an overview of the influence of raw milk quality on the quality of processed dairy products and offers a perspective on the merits of investing in quality. Dairy farmers are frequently offered monetary premium incentives to provide high-quality milk to processors. These incentives are most often based on raw milk somatic cell and bacteria count levels well below the regulatory public health-based limits. Justification for these incentive payments can be based on improved processed product quality and manufacturing efficiencies that provide the processor with a return on their investment for high-quality raw milk. In some cases, this return on investment is difficult to measure. Raw milks with high levels of somatic cells and bacteria are associated with increased enzyme activity that can result in product defects. Use of raw milk with somatic cell counts >100,000cells/mL has been shown to reduce cheese yields, and higher levels, generally >400,000 cells/mL, have been associated with textural and flavor defects in cheese and other products. Although most research indicates that fairly high total bacteria counts (>1,000,000 cfu/mL) in raw milk are needed to cause defects in most processed dairy products, receiving high-quality milk from the farm allows some flexibility for handling raw milk, which can increase efficiencies and reduce the risk of raw milk reaching bacterial levels of concern. Monitoring total bacterial numbers in regard to raw milk quality is imperative, but determining levels of specific types of bacteria present has gained increasing importance. For example, spores of certain spore-forming bacteria present in raw milk at very low levels (e.g., products to levels that result in defects. With the exception of meeting product specifications often required for milk powders, testing for specific spore-forming groups is currently not used in quality incentive programs in the United States but is used in other countries (e.g., the

Signal-background interference effects for gg{yields}H{yields}W{sup +}W{sup -} beyond leading order

Energy Technology Data Exchange (ETDEWEB)

Bonvini, Marco [Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany); Caola, Fabrizio; Melnikov, Kirill [Johns Hopkins Univ., Baltimore (United States). Dept. of Physics and Astronomy; Forte, Stefano [Univ. di Milano, Sezione di Milano (Italy). Dipt. di Fisica; INFN, Sezione di Milano (Italy); Ridolfi, Giovanni [Univ. di Genova, Sezione di Genova (Italy). Dipt. di Fisica; INFN, Sezione di Genova (Italy)

2013-04-15

We study the effect of QCD corrections to the gg {yields} H {yields} W{sup +}W{sup -} signal-background interference at the LHC for a heavy Higgs boson. We construct a soft-collinear approximation to the NLO and NNLO corrections for the background process, which is exactly known only at LO. We estimate its accuracy by constructing and comparing the same approximation to the exact result for the signal process, which is known up to NNLO, and we conclude that we can describe the signal-background interference to better than O(10%) accuracy. We show that our result implies that, in practice, a fairly good approximation to higher-order QCD corrections to the interference may also be obtained by rescaling the known LO result by a K-factor computed using the signal process.

Effect of pelleting process variables on physical properties and sugar yields of ammonia fiber expansion pretreated corn stover

Energy Technology Data Exchange (ETDEWEB)

Amber N. Hoover; Jaya Shankar Tumuluru; Farzaneh Teymouri; Garold L. Gresham; Janette Moore

2014-07-01

Pelletization process variables including grind size (4, 6 mm), die speed (40, 50, 60 Hz), and preheating (none, 70 degrees C) were evaluated to understand their effect on pellet quality attributes and sugar yields of ammonia fiber expansion (AFEX) pretreated biomass. The bulk density of the pelletized AFEX corn stover was three to six times greater compared to untreated and AFEX-treated corn stover. Also the durability of the pelletized AFEX corn stover was >97.5% for all pelletization conditions studied except for preheated pellets. Die speed had no effect on enzymatic hydrolysis sugar yields of pellets. Pellets produced with preheating or a larger grind size (6 mm) had similar or lower sugar yields. Pellets generated with 4 mm AFEX-treated corn stover, a 60 Hz die speed, and no preheating resulted in pellets with similar or greater density, durability, and sugar yields compared to other pelletization conditions.

Nut crop yield records show that budbreak-based chilling requirements may not reflect yield decline chill thresholds

Science.gov (United States)

Pope, Katherine S.; Dose, Volker; Da Silva, David; Brown, Patrick H.; DeJong, Theodore M.

2015-06-01

Warming winters due to climate change may critically affect temperate tree species. Insufficiently cold winters are thought to result in fewer viable flower buds and the subsequent development of fewer fruits or nuts, decreasing the yield of an orchard or fecundity of a species. The best existing approximation for a threshold of sufficient cold accumulation, the "chilling requirement" of a species or variety, has been quantified by manipulating or modeling the conditions that result in dormant bud breaking. However, the physiological processes that affect budbreak are not the same as those that determine yield. This study sought to test whether budbreak-based chilling thresholds can reasonably approximate the thresholds that affect yield, particularly regarding the potential impacts of climate change on temperate tree crop yields. County-wide yield records for almond ( Prunus dulcis), pistachio ( Pistacia vera), and walnut ( Juglans regia) in the Central Valley of California were compared with 50 years of weather records. Bayesian nonparametric function estimation was used to model yield potentials at varying amounts of chill accumulation. In almonds, average yields occurred when chill accumulation was close to the budbreak-based chilling requirement. However, in the other two crops, pistachios and walnuts, the best previous estimate of the budbreak-based chilling requirements was 19-32 % higher than the chilling accumulations associated with average or above average yields. This research indicates that physiological processes beyond requirements for budbreak should be considered when estimating chill accumulation thresholds of yield decline and potential impacts of climate change.

Modeling of yield and environmental impact categories in tea processing units based on artificial neural networks.

Science.gov (United States)

Khanali, Majid; Mobli, Hossein; Hosseinzadeh-Bandbafha, Homa

2017-12-01

In this study, an artificial neural network (ANN) model was developed for predicting the yield and life cycle environmental impacts based on energy inputs required in processing of black tea, green tea, and oolong tea in Guilan province of Iran. A life cycle assessment (LCA) approach was used to investigate the environmental impact categories of processed tea based on the cradle to gate approach, i.e., from production of input materials using raw materials to the gate of tea processing units, i.e., packaged tea. Thus, all the tea processing operations such as withering, rolling, fermentation, drying, and packaging were considered in the analysis. The initial data were obtained from tea processing units while the required data about the background system was extracted from the EcoInvent 2.2 database. LCA results indicated that diesel fuel and corrugated paper box used in drying and packaging operations, respectively, were the main hotspots. Black tea processing unit caused the highest pollution among the three processing units. Three feed-forward back-propagation ANN models based on Levenberg-Marquardt training algorithm with two hidden layers accompanied by sigmoid activation functions and a linear transfer function in output layer, were applied for three types of processed tea. The neural networks were developed based on energy equivalents of eight different input parameters (energy equivalents of fresh tea leaves, human labor, diesel fuel, electricity, adhesive, carton, corrugated paper box, and transportation) and 11 output parameters (yield, global warming, abiotic depletion, acidification, eutrophication, ozone layer depletion, human toxicity, freshwater aquatic ecotoxicity, marine aquatic ecotoxicity, terrestrial ecotoxicity, and photochemical oxidation). The results showed that the developed ANN models with R 2 values in the range of 0.878 to 0.990 had excellent performance in predicting all the output variables based on inputs. Energy consumption for

Fission yield measurements at IGISOL

Science.gov (United States)

Lantz, M.; Al-Adili, A.; Gorelov, D.; Jokinen, A.; Kolhinen, V. S.; Mattera, A.; Moore, I.; Penttilä, H.; Pomp, S.; Prokofiev, A. V.; Rakopoulos, V.; Rinta-Antila, S.; Simutkin, V.; Solders, A.

2016-06-01

The fission product yields are an important characteristic of the fission process. In fundamental physics, knowledge of the yield distributions is needed to better understand the fission process. For nuclear energy applications good knowledge of neutroninduced fission-product yields is important for the safe and efficient operation of nuclear power plants. With the Ion Guide Isotope Separator On-Line (IGISOL) technique, products of nuclear reactions are stopped in a buffer gas and then extracted and separated by mass. Thanks to the high resolving power of the JYFLTRAP Penning trap, at University of Jyväskylä, fission products can be isobarically separated, making it possible to measure relative independent fission yields. In some cases it is even possible to resolve isomeric states from the ground state, permitting measurements of isomeric yield ratios. So far the reactions U(p,f) and Th(p,f) have been studied using the IGISOL-JYFLTRAP facility. Recently, a neutron converter target has been developed utilizing the Be(p,xn) reaction. We here present the IGISOL-technique for fission yield measurements and some of the results from the measurements on proton induced fission. We also present the development of the neutron converter target, the characterization of the neutron field and the first tests with neutron-induced fission.

Fission yield measurements at IGISOL

Directory of Open Access Journals (Sweden)

Lantz M.

2016-01-01

Full Text Available The fission product yields are an important characteristic of the fission process. In fundamental physics, knowledge of the yield distributions is needed to better understand the fission process. For nuclear energy applications good knowledge of neutroninduced fission-product yields is important for the safe and efficient operation of nuclear power plants. With the Ion Guide Isotope Separator On-Line (IGISOL technique, products of nuclear reactions are stopped in a buffer gas and then extracted and separated by mass. Thanks to the high resolving power of the JYFLTRAP Penning trap, at University of Jyväskylä, fission products can be isobarically separated, making it possible to measure relative independent fission yields. In some cases it is even possible to resolve isomeric states from the ground state, permitting measurements of isomeric yield ratios. So far the reactions U(p,f and Th(p,f have been studied using the IGISOL-JYFLTRAP facility. Recently, a neutron converter target has been developed utilizing the Be(p,xn reaction. We here present the IGISOL-technique for fission yield measurements and some of the results from the measurements on proton induced fission. We also present the development of the neutron converter target, the characterization of the neutron field and the first tests with neutron-induced fission.

Methane-yielding microbial communities processing lactate-rich substrates: a piece of the anaerobic digestion puzzle.

Science.gov (United States)

Detman, Anna; Mielecki, Damian; Pleśniak, Łukasz; Bucha, Michał; Janiga, Marek; Matyasik, Irena; Chojnacka, Aleksandra; Jędrysek, Mariusz-Orion; Błaszczyk, Mieczysław K; Sikora, Anna

2018-01-01

Anaerobic digestion, whose final products are methane and carbon dioxide, ensures energy flow and circulation of matter in ecosystems. This naturally occurring process is used for the production of renewable energy from biomass. Lactate, a common product of acidic fermentation, is a key intermediate in anaerobic digestion of biomass in the environment and biogas plants. Effective utilization of lactate has been observed in many experimental approaches used to study anaerobic digestion. Interestingly, anaerobic lactate oxidation and lactate oxidizers as a physiological group in methane-yielding microbial communities have not received enough attention in the context of the acetogenic step of anaerobic digestion. This study focuses on metabolic transformation of lactate during the acetogenic and methanogenic steps of anaerobic digestion in methane-yielding bioreactors. Methane-yielding microbial communities instead of pure cultures of acetate producers were used to process artificial lactate-rich media to methane and carbon dioxide in up-flow anaerobic sludge blanket reactors. The media imitated the mixture of acidic products found in anaerobic environments/digesters where lactate fermentation dominates in acidogenesis. Effective utilization of lactate and biogas production was observed. 16S rRNA profiling was used to examine the selected methane-yielding communities. Among Archaea present in the bioreactors, the order Methanosarcinales predominated. The acetoclastic pathway of methane formation was further confirmed by analysis of the stable carbon isotope composition of methane and carbon dioxide. The domain Bacteria was represented by Bacteroidetes , Firmicutes , Proteobacteria , Synergistetes , Actinobacteria , Spirochaetes , Tenericutes , Caldithrix , Verrucomicrobia , Thermotogae , Chloroflexi , Nitrospirae, and Cyanobacteria. Available genome sequences of species and/or genera identified in the microbial communities were searched for genes encoding the lactate

Predicting paddlefish roe yields using an extension of the Beverton–Holt equilibrium yield-per-recruit model

Science.gov (United States)

Colvin, M.E.; Bettoli, Phillip William; Scholten, G.D.

2013-01-01

Equilibrium yield models predict the total biomass removed from an exploited stock; however, traditional yield models must be modified to simulate roe yields because a linear relationship between age (or length) and mature ovary weight does not typically exist. We extended the traditional Beverton-Holt equilibrium yield model to predict roe yields of Paddlefish Polyodon spathula in Kentucky Lake, Tennessee-Kentucky, as a function of varying conditional fishing mortality rates (10-70%), conditional natural mortality rates (cm; 9% and 18%), and four minimum size limits ranging from 864 to 1,016mm eye-to-fork length. These results were then compared to a biomass-based yield assessment. Analysis of roe yields indicated the potential for growth overfishing at lower exploitation rates and smaller minimum length limits than were suggested by the biomass-based assessment. Patterns of biomass and roe yields in relation to exploitation rates were similar regardless of the simulated value of cm, thus indicating that the results were insensitive to changes in cm. Our results also suggested that higher minimum length limits would increase roe yield and reduce the potential for growth overfishing and recruitment overfishing at the simulated cm values. Biomass-based equilibrium yield assessments are commonly used to assess the effects of harvest on other caviar-based fisheries; however, our analysis demonstrates that such assessments likely underestimate the probability and severity of growth overfishing when roe is targeted. Therefore, equilibrium roe yield-per-recruit models should also be considered to guide the management process for caviar-producing fish species.

ExEP yield modeling tool and validation test results

Science.gov (United States)

Morgan, Rhonda; Turmon, Michael; Delacroix, Christian; Savransky, Dmitry; Garrett, Daniel; Lowrance, Patrick; Liu, Xiang Cate; Nunez, Paul

2017-09-01

EXOSIMS is an open-source simulation tool for parametric modeling of the detection yield and characterization of exoplanets. EXOSIMS has been adopted by the Exoplanet Exploration Programs Standards Definition and Evaluation Team (ExSDET) as a common mechanism for comparison of exoplanet mission concept studies. To ensure trustworthiness of the tool, we developed a validation test plan that leverages the Python-language unit-test framework, utilizes integration tests for selected module interactions, and performs end-to-end crossvalidation with other yield tools. This paper presents the test methods and results, with the physics-based tests such as photometry and integration time calculation treated in detail and the functional tests treated summarily. The test case utilized a 4m unobscured telescope with an idealized coronagraph and an exoplanet population from the IPAC radial velocity (RV) exoplanet catalog. The known RV planets were set at quadrature to allow deterministic validation of the calculation of physical parameters, such as working angle, photon counts and integration time. The observing keepout region was tested by generating plots and movies of the targets and the keepout zone over a year. Although the keepout integration test required the interpretation of a user, the test revealed problems in the L2 halo orbit and the parameterization of keepout applied to some solar system bodies, which the development team was able to address. The validation testing of EXOSIMS was performed iteratively with the developers of EXOSIMS and resulted in a more robust, stable, and trustworthy tool that the exoplanet community can use to simulate exoplanet direct-detection missions from probe class, to WFIRST, up to large mission concepts such as HabEx and LUVOIR.

Supplementary effects of higher levels of various disaccharides on processing yield, quality properties and sensory attributes of Chinese - style pork jerky.

Science.gov (United States)

Chen, Chih-Ming; Lin, Hsien-Tang

2017-12-01

This study evaluated the supplementary effect of higher concentrations of various disaccharides on processing yield, major physicochemical properties, and sensory attributes of Chinese-style pork jerky (CSPJ). CSPJ samples were prepared by marinating sliced ham (4 mm) with three dissaccharides, including sucrose, lactose, and maltose, at 0%, 15%, 18%, 21%, and 24%. Subsequently, the CSPJ samples were dried and roasted. The moisture content, water activity, crude protein, moisture-to-protein ratio, pH, processing yield, shear force, color, and sensory attributes of the CSPJ samples were evaluated. The quality characteristics of CSPJ samples prepared with sucrose were more acceptable. By contrast, CSPJ samples prepared with lactose showed the lowest scores. However, the processing yield and moisture content were the highest for CSPJ samples prepared with lactose, which may be associated with improved benefits for cost reduction. Furthermore, sucrose and lactose supplementation resulted in contrasting quality characteristics; for example, CSPJ samples with sucrose and maltose supplementation had higher sensory scores for color than samples with lactose supplementation. Additionally, most quality characteristics of CSPJ samples with sucrose supplementation contrasted with those of the samples with lactose supplementation; for example, the samples with sucrose supplementation had higher scores for sensory attributes than those with lactose supplementation. Sucrose supplementation up to 21% to 24% was associated with the highest overall acceptability scores (5.19 to 5.80), enhanced quality characteristics, increased processing yield, and reduced production cost.

High liquid fuel yielding biofuel processes and a roadmap for the future transportation

Science.gov (United States)

Singh, Navneet R.

In a fossil-fuel deprived world when crude oil will be scarce and transportation need cannot be met with electricity and transportation liquid fuel must be produced, biomass derived liquid fuels can be a natural replacement. However, the carbon efficiency of the currently known biomass to liquid fuel conversion processes ranges from 35-40%, yielding 90 ethanol gallon equivalents (ege) per ton of biomass. This coupled with the fact that the efficiency at which solar energy is captured by biomass (hydrodeoxygenation is proposed which can achieve liquid fuel yield of 215 ege/ton consuming 0.11 kg hydrogen per liter of oil. Due to the lower hydrogen consumption of the H2Bioil process, synergistically integrated transition pathways are feasible where hot syngas derived from coal gasification (H2Bioil-C) or a natural gas reformer (H 2Bioil-NG) is used to supply the hydrogen and process heat for the biomass fast-hydropyrolysis/hydrodeoxygenation. Another off-shoot of the H2Bioil process is the H2Bioil-B process, where hydrogen required for the hydropyrolysis is obtained from gasification of a fraction of the biomass. H2Bioil-B achieves the highest liquid fuel yield (126-146 ege/ton of biomass) reported in the literature for any self-contained conversion of biomass to biofuel. Finally, an integration of the H2Bioil process with the H2CAR process is suggested which can achieve 100% carbon efficiency (330 ege/ton of biomass) at the expense of 0.24 kg hydrogen/liter of oil. A sun-to-fuel efficiency analysis shows that extracting CO2 from air and converting it to liquid fuel is at least two times more efficient than growing dedicated fuel crops and converting them to liquid fuel even for the highest biomass growth rates feasible by algae. This implies that liquid fuel should preferably be produced from sustainably available waste (SAW) biomass first and if the SAW biomass is unable to meet the demand for liquid fuel, then, CO2 should be extracted from air and converted to

Supportability of a High-Yield-Stress Slurry in a New Stereolithography-Based Ceramic Fabrication Process

Science.gov (United States)

He, Li; Song, Xuan

2018-03-01

In recent years, ceramic fabrication using stereolithography (SLA) has gained in popularity because of its high accuracy and density that can be achieved in the final part of production. One of the key challenges in ceramic SLA is that support structures are required for building overhanging features, whereas removing these support structures without damaging the components is difficult. In this research, a suspension-enclosing projection-stereolithography process is developed to overcome this challenge. This process uses a high-yield-stress ceramic slurry as the feedstock material and exploits the elastic force of the material to support overhanging features without the need for building additional support structures. Ceramic slurries with different solid loadings are studied to identify the rheological properties most suitable for supporting overhanging features. An analytical model of a double doctor-blade module is established to obtain uniform and thin recoating layers from a high-yield-stress slurry. Several test cases highlight the feasibility of using a high-yield-stress slurry to support overhanging features in SLA.

Study of nonproportionality in the light yield of inorganic scintillators

Energy Technology Data Exchange (ETDEWEB)

Singh, Jai [School of Engineering and IT, B-purple-12, Faculty of EHSE, Charles Darwin University, Darwin, Northern Territory 0909 (Australia)

2011-07-15

Using a phenomenological approach, the light yield is derived for inorganic scintillators as a function of the rates of linear, bimolecular, and Auger processes occurring in the electron track initiated by an x ray or a {gamma}-ray photon. A relation between the track length and incident energy is also derived. It is found that the nonproportionality in the light yield can be eliminated if either nonlinear processes of interaction among the excited electrons, holes, and excitons can be eliminated from occurring or the high density situation can be relieved by diffusion of carriers from the track at a faster rate than the rate of activation of nonlinear processes. The influence of the track length and radius on the yield nonproportionality is discussed in view of the known experimental results. Inventing new inorganic scintillating materials with high carrier mobility can lead to a class of proportional inorganic scintillators. Results agree qualitatively with experimental results for the dependence of light yield on the incident energy.

Study of nonproportionality in the light yield of inorganic scintillators

International Nuclear Information System (INIS)

Singh, Jai

2011-01-01

Using a phenomenological approach, the light yield is derived for inorganic scintillators as a function of the rates of linear, bimolecular, and Auger processes occurring in the electron track initiated by an x ray or a γ-ray photon. A relation between the track length and incident energy is also derived. It is found that the nonproportionality in the light yield can be eliminated if either nonlinear processes of interaction among the excited electrons, holes, and excitons can be eliminated from occurring or the high density situation can be relieved by diffusion of carriers from the track at a faster rate than the rate of activation of nonlinear processes. The influence of the track length and radius on the yield nonproportionality is discussed in view of the known experimental results. Inventing new inorganic scintillating materials with high carrier mobility can lead to a class of proportional inorganic scintillators. Results agree qualitatively with experimental results for the dependence of light yield on the incident energy.

Mass production of multi-wall carbon nanotubes by metal dusting process with high yield

International Nuclear Information System (INIS)

Ghorbani, H.; Rashidi, A.M.; Rastegari, S.; Mirdamadi, S.; Alaei, M.

2011-01-01

Research highlights: → Synthesis of carbon nanotubes over Fe-Ni nanoparticles supported alloy 304L. → Production of carbon nanotubes with high yield (700-1000%) and low cost catalyst. → Optimum growth condition is CO/H 2 = 1/1, 100 cm 3 /min, at 620 o C under long term repetitive thermal cycling. → Possibility of the mass production by metal dusting process with low cost. -- Abstract: Carbon nanotube materials were synthesized over Fe-Ni nanoparticles generated during disintegration of the surface of alloy 304L under metal dusting environment. The metal dusting condition was simulated and optimized through exposing stainless steel samples during long term repetitive thermal cycling in CO/H 2 = 1/1, total gas flow rate 100 cm 3 /min, at 620 o C for 300 h. After reaction, surface morphology of the samples and also carbonaceous deposition which had grown on sample surfaces were examined by stereoscopy, scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Results revealed that multi-wall carbon nanotubes could be formed over nanocatalyst generated on the alloy surface by exploiting metal dusting process. By optimization of reaction parameters the yields of carbon nanotube materials obtained were 700-1000%. Also it has been shown herein that the amount of carbon nanotube materials remarkably increases when the reaction time is extended up to 300 h, indicating a possibility of the mass production by this easy method.

Processing yield and chemical composition of rainbow trout (Oncorhynchus mykiss with regard to body weight

Directory of Open Access Journals (Sweden)

Maria Luiza Rodrigues de Souza

2015-05-01

Full Text Available The influence of weight (W category of the rainbow trout on processing yield and chemical composition of the entire eviscerated fish and fish fillet was analyzed. A completely randomized design was employed for processing variables (W1 = 300 to 370 g and W2 = 371 to 440 coupled to a 2 x 2 factorial scheme for the chemical composition (W1 and W2 and forms of presentation: fillet and whole eviscerated fish. W1 showed higher yield for entire eviscerated fish (83.00% and head (13.27%, but a lower yield for the viscera (17.00%, when compared to W2. We did not affect abdominal muscle yield, fillet with or without skin, skin percentage and residues. There were significant differences between W for moisture (W1 = 72.30% and W2 = 71.15% and lipids (CP1 = 7.96% and CP2 = 9.04% rates. Fillet moisture contents (73.74% and crude protein (19.05% were higher (p < 0.01 than for entire eviscerated fish (69.71% and 17.81%, respectively. Ash (2.15% and lipid (10.48% rates were higher (p < 0.01 for entire fish when compared to those of fillets (1.16% and 6.52%, respectively. The slaughter of fish weighing between 300 and 370 g and their fillets are more adequate for the market.

Care initiation area yields dramatic results.

Science.gov (United States)

2009-03-01

The ED at Gaston Memorial Hospital in Gastonia, NC, has achieved dramatic results in key department metrics with a Care Initiation Area (CIA) and a physician in triage. Here's how the ED arrived at this winning solution: Leadership was trained in and implemented the Kaizen method, which eliminates redundant or inefficient process steps. Simulation software helped determine additional space needed by analyzing arrival patterns and other key data. After only two days of meetings, new ideas were implemented and tested.

RDF gasification with water vapour: influence of process temperature on yield and products composition

International Nuclear Information System (INIS)

Galvagno, S.; Casciaro, G.; Russo, A.; Casu, S.; Martino, M.; Portofino, S.

2005-01-01

The opportunity of using RDF (Refused Derived Fuel) to produce fuel gas seems to be promising and particular attention has been focused on alternative process technologies such as pyrolysis and gasification. Within this frame, present work relates to experimental tests and obtained results of a series of experimental surveys on RDF gasification with water vapour, carried out by means of a bench scale rotary kiln plant at different process temperature, using thermogravimetry (TG) and infrared spectrometry (FTIR), in order to characterize the incoming material, and online gas chromatography to qualify the gaseous stream. Experimental data show that gas yield rise with temperature and, with respect to the gas composition, hydrogen content grows up mainly at the expense of the other gaseous compound, pointing out the major extension of secondary cracking reactions into the gaseous fraction at higher temperature. Syngas obtained at process temperature of 950 o C or higher seems to be suitable for fuel cells applications; at lower process temperature, gas composition suggest a final utilisation for feedstock recycling. The low organic content of solid residue does not suggest any other exploitation of the char apart from the land filling [it

Supercritical fluid extraction of peach (Prunus persica) almond oil: process yield and extract composition.

Science.gov (United States)

Mezzomo, Natália; Mileo, Bruna R; Friedrich, Maria T; Martínez, Julian; Ferreira, Sandra R S

2010-07-01

Peach kernels are industrial residues from the peach processing, contain oil with important therapeutic properties and attractive nutritional aspects because of the high concentration of oleic and linoleic acids. The extraction method used to obtain natural compounds from raw matter is critical for product quality definition. Thus, the aim of this work was to compare peach almond extraction yields obtained by different procedures: soxhlet extractions (Sox) with different solvents; hydrodistillation (HD); ethanolic maceration (Mac) followed by fractionation with various solvents, and supercritical fluid extraction (SFE) at 30, 40 and 50 degrees C and at 100, 200 and 300bar, performed with pure CO(2) and with a co-solvent. The extracts were evaluated with respect to fatty acid composition (FAC), fractionated chemical profile (FCP) and total phenolic content (TPC). The Sox total yields were generally higher than those obtained by SFE. The crossover pressure for SFE was between 260 and 280bar. The FAC results show oleic and linoleic acids as main components, especially for Sox and SFE extracts. The FCP for samples obtained by Sox and Mac indicated the presence of benzaldehyde and benzyl alcohol, components responsible for almond flavor and with important industrial uses, whereas the SFE extracts present a high content of a possible flavonoid. The higher TPC values were obtained by Sox and Mac with ethanol. In general, the maximum pressure in SFE produced the highest yield, TPC and oleic acid content. The use of ethanol at 5% as co-solvent in SFE did not result in a significant effect on any evaluated parameter. The production of peach almond oil through all techniques is substantially adequate and SFE presented advantages, with respect to the quality of the extracts due to the high oleic acid content, as presented by some Sox samples. Copyright (c) 2010 Elsevier Ltd. All rights reserved.

Defining Primary Care Shortage Areas: Do GIS-based Measures Yield Different Results?

Science.gov (United States)

Daly, Michael R; Mellor, Jennifer M; Millones, Marco

2018-02-12

To examine whether geographic information systems (GIS)-based physician-to-population ratios (PPRs) yield determinations of geographic primary care shortage areas that differ from those based on bounded-area PPRs like those used in the Health Professional Shortage Area (HPSA) designation process. We used geocoded data on primary care physician (PCP) locations and census block population counts from 1 US state to construct 2 shortage area indicators. The first is a bounded-area shortage indicator defined without GIS methods; the second is a GIS-based measure that measures the populations' spatial proximity to PCP locations. We examined agreement and disagreement between bounded shortage areas and GIS-based shortage areas. Bounded shortage area indicators and GIS-based shortage area indicators agree for the census blocks where the vast majority of our study populations reside. Specifically, 95% and 98% of the populations in our full and urban samples, respectively, reside in census blocks where the 2 indicators agree. Although agreement is generally high in rural areas (ie, 87% of the rural population reside in census blocks where the 2 indicators agree), agreement is significantly lower compared to urban areas. One source of disagreement suggests that bounded-area measures may "overlook" some shortages in rural areas; however, other aspects of the HPSA designation process likely mitigate this concern. Another source of disagreement arises from the border-crossing problem, and it is more prevalent. The GIS-based PPRs we employed would yield shortage area determinations that are similar to those based on bounded-area PPRs defined for Primary Care Service Areas. Disagreement rates were lower than previous studies have found. © 2018 National Rural Health Association.

High-yield pulping effluent treatment technologies

International Nuclear Information System (INIS)

Su, W.X.; Hsieh, J.S.

1993-03-01

The objective of this report is to examine the high-yield (mechanical) pulp processes with respect to environmental issues affected by the discharge of their waste streams. Various statistics are given that support the view that high-yield pulping processes will have major growth in the US regions where pulp mills are located, and sites for projects in the development phase are indicated. Conventional and innovative effluent-treatment technologies applicable to these processes are reviewed. The different types of mechanical pulping or high-yield processes are explained, and the chemical additives are discussed. The important relationship between pulp yield and measure of BOD in the effluent is graphically presented. Effluent contaminants are identified, along with other important characteristics of the streams. Current and proposed environmental limitations specifically related to mechanical pulp production are reviewed. Conventional and innovative effluent-treatment technologies are discussed, along with their principle applications, uses, advantages, and disadvantages. Sludge management and disposal techniques become an intimate part of the treatment of waste streams. The conclusion is made that conventional technologies can successfully treat effluent streams under current waste-water discharge limitations, but these systems may not be adequate when stricter standards are imposed. At present, the most important issue in the treatment of pulp-mill waste is the management and disposal of the resultant sludge

An adapted yield criterion for the evolution of subsequent yield surfaces

Science.gov (United States)

Küsters, N.; Brosius, A.

2017-09-01

In numerical analysis of sheet metal forming processes, the anisotropic material behaviour is often modelled with isotropic work hardening and an average Lankford coefficient. In contrast, experimental observations show an evolution of the Lankford coefficients, which can be associated with a yield surface change due to kinematic and distortional hardening. Commonly, extensive efforts are carried out to describe these phenomena. In this paper an isotropic material model based on the Yld2000-2d criterion is adapted with an evolving yield exponent in order to change the yield surface shape. The yield exponent is linked to the accumulative plastic strain. This change has the effect of a rotating yield surface normal. As the normal is directly related to the Lankford coefficient, the change can be used to model the evolution of the Lankford coefficient during yielding. The paper will focus on the numerical implementation of the adapted material model for the FE-code LS-Dyna, mpi-version R7.1.2-d. A recently introduced identification scheme [1] is used to obtain the parameters for the evolving yield surface and will be briefly described for the proposed model. The suitability for numerical analysis will be discussed for deep drawing processes in general. Efforts for material characterization and modelling will be compared to other common yield surface descriptions. Besides experimental efforts and achieved accuracy, the potential of flexibility in material models and the risk of ambiguity during identification are of major interest in this paper.

A high-yielding, generic fed-batch process for recombinant antibody production of GS-engineered cell lines

DEFF Research Database (Denmark)

Fan, Li; Zhao, Liang; Sun, Yating

2009-01-01

An animal component-free and chemically defined fed-batch process for GS-engineered cell lines producing recombinant antibodies has been developed. The fed-batch process relied on supplying sufficient nutrients to match their consumption, simultaneously minimizing the accumulation of byproducts....... This generic and high-yielding fed-batch process would shorten development time, and ensure process stability, thereby facilitating the manufacture of therapeutic antibodies by GS-engineered cell lines....

Study of hypercharge exchange processes 0{sup -}1/2+{yields}1{sup -} 1/2+; Estudio de procesos 0-1/2+{yields}1-1/2+ con intercambio de hipercarga

Energy Technology Data Exchange (ETDEWEB)

Albajar Molera, M c; Aguilar Beniter de Lugo, M.

1981-07-01

In this work we present a formalism for the reconstruction of the transitivity amplitudes governing the processes of the type 0-1/2+{yields}1-1/2+. The formalism uses the information contained in the decay angular correlations and takes into account the existence of mixed spin configurations in the final state 0-1/2+{yields}(0{down_arrow}, 1-)1/2+ (Author) 10 refs.

Influence of Inter and Intra-rows Spacing on Yield and Yield ...

African Journals Online (AJOL)

Abyssinia

yield and yield components of fresh market(Bishola) and processing (Cochoro) tomato cultivars. ... row spacing had a significant effect on plan canopy width, above ground dry biomass, ... Poor varietal performance and management practices that includeinter and intra-row spacing ..... of assimilate export from the leaves.

Influence of reaction conditions and type of alcohol on biodiesel yields and process economics of supercritical transesterification

International Nuclear Information System (INIS)

Micic, Radoslav D.; Tomić, Milan D.; Kiss, Ferenc E.; Nikolić-Djorić, Emilija B.; Simikić, Mirko Ð.

2014-01-01

Highlights: • Transesterification in supercritical methanol, ethanol and 1-propanol investigated. • Effect of alcohol, reaction temperature, pressure and time on yields analyzed. • Temperature has the highest impact on yield, followed by time and pressure. • Direct material and energy costs for each of the production alternatives estimated. • Lowest costs are achieved at highest yields even at very low oil prices. - Abstract: Experiments with transesterification of rapeseed oil in supercritical alcohols (methanol, ethanol and 1-propanol) were carried out in a batch reactor at various reaction temperatures (250–350 °C), working pressure (8–12 MPa), reaction time, and constant 42:1 alcohol to oil molar ratio. Influence of different alcohols and reaction conditions on biodiesel yield was investigated using linear multiple regression models. Temperature had the highest impact on yields, followed by reaction time and pressure. With increased molecular weight of alcohols, relative importance of temperature for explanation of yields decreased and relative importance of time and pressure increased. Economic assessment has revealed that transesterification in supercritical methanol has the lowest direct material and energy costs. Yield has crucial impact on process economics. Direct costs decrease with increase in biodiesel yields. Even at very low prices of oil feedstock the lowest cost is achieved at the highest yield

Encapsulation Processing and Manufacturing Yield Analysis

Science.gov (United States)

Willis, P.

1985-01-01

Evaluation of the ethyl vinyl acetate (EVA) encapsulation system is presented. This work is part of the materials baseline needed to demonstrate a 30 year module lifetime capability. Process and compound variables are both being studied along with various module materials. Results have shown that EVA should be stored rolled up, and enclosed in a plastic bag to retard loss of peroxide curing agents. The TBEC curing agent has superior shelf life and processing than the earlier Lupersol-101 curing agent. Analytical methods were developed to test for peroxide content, and experimental methodologies were formalized.

Reverse transcription using random pentadecamer primers increases yield and quality of resulting cDNA

DEFF Research Database (Denmark)

Stangegaard, Michael; Dufva, I.H.; Dufva, Hans Martin

2006-01-01

oligonucleotides (pentadecamers) consistently, yielded at least 2 fold as much cDNA as did random hexamers using either-poly(A) RNA or an amplified version of messenger RNA (aRNA) as a template. The cDNA generated using pentadecamers did not differ in size distribution or the amount of incorporated label compared...... with cDNA generated with random hexamers. The increased efficiency of priming using random pentadecamers resulted in reverse transcription of > 80% of the template aRNA, while random hexamers induced reverse transcription of only 40% of the template aRNA. This suggests a better coverage...... that random pentadecamers can replace random hexamers in reverse transcription reactions on both poly(A) RNA and amplified RNA, resulting in higher cDNA yields and quality....

Rosemary Aromatization of Extra Virgin Olive Oil and Process Optimization Including Antioxidant Potential and Yield

Directory of Open Access Journals (Sweden)

Erkan Karacabey

2016-08-01

Full Text Available Aromatization of olive oil especially by spices and herbs has been widely used technique throughout the ages in Mediterranean diets. The present study was focused on aromatization of olive oil by rosemary (Rosmarinus officinalis L.. Aromatization process was optimized by response surface methodology as a function of malaxation’s conditions (temperature and time. According to authors’ best knowledge it was first time for examination of oil yield performance with antioxidant potential and pigments under effect of aromatization parameters. For all oil samples, values of the free acidity, peroxide, K232 and K270 as quality parameters fell within the ranges established for the highest quality category “extra virgin oil”. Oil yield (mL oil/kg olive paste changed from 158 to 208 with respect to design parameters. Total phenolic content and free radical scavenging activity as antioxidant potential of olive oil samples were varied in the range of 182.44 – 348.65 mg gallic acid equivalent/kg oil and 28.91 – 88.75 % inhibition of 2,2-Diphenyl-1-picrylhydrazyl-(DPPH•, respectively. Total contents of carotenoid, chlorophyll and pheophytin a as pigments in oil samples were found to be in between 0.09 – 0.48 mg carotenoid/kg oil, 0.11 – 0.96 mg chlorophyll/kg oil, 0.15 – 4.44 mg pheo α/kg oil, respectively. The proposed models for yield, pigments and antioxidant potential responses were found to be good enough for successful prediction of experimental results. Total phenolics, carotenoids and free radical scavenging activity of aromatized olive oil and oil yield were maximized to gather and optimal conditions were determined as 25°C, 84 min, and 2 % (Rosemary/olive paste; w/w.

Process control upgrades yield huge operational improvements

International Nuclear Information System (INIS)

Fitzgerald, W.V.

2001-01-01

Most nuclear plants in North America were designed and built in the late 60 and 70. The regulatory nature of this industry over the years has made design changes at the plant level difficult, if not impossible, to implement. As a result, many plants in this world region have been getting by on technology that is over 40 years behind the times. What this translates into is that the plants have not been able to take advantage of the huge technology gains that have been made in process control during this period. As a result, most of these plants are much less efficient and productive than they could be. One particular area of the plant that is receiving a lot of attention is the feedwater heaters. These systems were put in place to improve efficiency, but most are not operating correctly. This paper will present a case study where one progressive mid-western utility decided that enough was enough and implemented a process control audit of their heater systems. The audit clearly pointed out the existing problems with the current process control system. It resulted in a proposal for the implementation of a state of the art, digital distributed process control system for the heaters along with a complete upgrade of the level controls and field devices that will stabilize heater levels, resulting in significant efficiency gains and lower maintenance bills. Overall the payback period for this investment should be less than 6 months and the plant is now looking for more opportunities that can provide even bigger gains. (author)

Combined use of Azolla and loach suppressed paddy weeds and increased organic rice yield: second season results

Directory of Open Access Journals (Sweden)

Weiguo Cheng

2015-01-01

Full Text Available Organic farming uses alternatives to agricultural chemicals such as synthetic fertilizers and pesticides. The primary challenge in organic rice farming is controlling weeds without using herbicides and improving rice yield without chemical fertilizers. In our previous paper entitled as combined use of Azolla and loach suppressed weed Monochoria vaginalis and increased rice yield without agrochemicals, we reported the first year rice growth season results from an in situ container experiment. The experiment was designed with 4 treatments—control (with neither Azolla nor loach, Azolla (Azolla alone, loach (loach alone, and Az+Lo (combined Azolla and loach—with 3 replications each. The first year results showed that combined use of Azolla and loach was successful in weed suppression and increase in rice yield in 2012. In this paper, we report the second year results from the continuous container experiment in 2013. M.vaginalis emergences were very low in second year rice growth season on all treatments. Compared first year, the rice yields decreased in second year on all treatments due to different weather condition and with or without organic soybean oil cake application between two rice growth seasons. The second year results also showed the raising loach had a stronger effect to increase tiller and panicle numbers, and spikelet number per panicle, then improve rice yields to 2.3 times than control. The Azolla residues left from first year have weaker effect on rice growth and yield, but increase soil organic matter accumulation at second year. The two years study indicated that combined use of Azolla and loach can meet two of the greatest challenges in organic rice production: providing effective weed control and improving rice nutrition without agrochemicals.

Geoelectrical parameter-based multivariate regression borehole yield model for predicting aquifer yield in managing groundwater resource sustainability

Directory of Open Access Journals (Sweden)

Kehinde Anthony Mogaji

2016-07-01

Full Text Available This study developed a GIS-based multivariate regression (MVR yield rate prediction model of groundwater resource sustainability in the hard-rock geology terrain of southwestern Nigeria. This model can economically manage the aquifer yield rate potential predictions that are often overlooked in groundwater resources development. The proposed model relates the borehole yield rate inventory of the area to geoelectrically derived parameters. Three sets of borehole yield rate conditioning geoelectrically derived parameters—aquifer unit resistivity (ρ, aquifer unit thickness (D and coefficient of anisotropy (λ—were determined from the acquired and interpreted geophysical data. The extracted borehole yield rate values and the geoelectrically derived parameter values were regressed to develop the MVR relationship model by applying linear regression and GIS techniques. The sensitivity analysis results of the MVR model evaluated at P ⩽ 0.05 for the predictors ρ, D and λ provided values of 2.68 × 10−05, 2 × 10−02 and 2.09 × 10−06, respectively. The accuracy and predictive power tests conducted on the MVR model using the Theil inequality coefficient measurement approach, coupled with the sensitivity analysis results, confirmed the model yield rate estimation and prediction capability. The MVR borehole yield prediction model estimates were processed in a GIS environment to model an aquifer yield potential prediction map of the area. The information on the prediction map can serve as a scientific basis for predicting aquifer yield potential rates relevant in groundwater resources sustainability management. The developed MVR borehole yield rate prediction mode provides a good alternative to other methods used for this purpose.

Arguments for fundamental emission by the parametric process L yields T + S in interplanetary type III bursts. [langmuir, electromagnetic, ion acoustic waves (L, T, S)

Science.gov (United States)

Cairns, I. H.

1984-01-01

Observations of low frequency ion acoustic-like waves associated with Langmuir waves present during interplanetary Type 3 bursts are used to study plasma emission mechanisms and wave processes involving ion acoustic waves. It is shown that the observed wave frequency characteristics are consistent with the processes L yields T + S (where L = Langmuir waves, T = electromagnetic waves, S = ion acoustic waves) and L yields L' + S proceeding. The usual incoherent (random phase) version of the process L yields T + S cannot explain the observed wave production time scale. The clumpy nature of the observed Langmuir waves is vital to the theory of IP Type 3 bursts. The incoherent process L yields T + S may encounter difficulties explaining the observed Type 3 brightness temperatures when Langmuir wave clumps are incorporated into the theory. The parametric process L yields T + S may be the important emission process for the fundamental radiation of interplanetary Type 3 bursts.

Near-Infrared Spectroscopy Combined with Multivariate Calibration to Predict the Yield of Sesame Oil Produced by Traditional Aqueous Extraction Process

Directory of Open Access Journals (Sweden)

Yong-Dong Xu

2017-01-01

Full Text Available Sesame oil produced by the traditional aqueous extraction process (TAEP has been recognized by its pleasant flavor and high nutrition value. This paper developed a rapid and nondestructive method to predict the sesame oil yield by TAEP using near-infrared (NIR spectroscopy. A collection of 145 sesame seed samples was measured by NIR spectroscopy and the relationship between the TAEP oil yield and the spectra was modeled by least-squares support vector machine (LS-SVM. Smoothing, taking second derivatives (D2, and standard normal variate (SNV transformation were performed to remove the unwanted variations in the raw spectra. The results indicated that D2-LS-SVM (4000–9000 cm−1 obtained the most accurate calibration model with root mean square error of prediction (RMSEP of 1.15 (%, w/w. Moreover, the RMSEP was not significantly influenced by different initial values of LS-SVM parameters. The calibration model could be helpful to search for sesame seeds with higher TAEP oil yields.

Estimation of the yield of poplars in plantations of fast-growing species within current results

Directory of Open Access Journals (Sweden)

Martin Fajman

2009-01-01

Full Text Available Current results are presented of allometric yield estimates of the poplar short rotation coppice. According to a literature review it is obvious that yield estimates, based on measurable quantities of a growing stand, depend not only on the selected tree specie or its clone, but also on the site location. The Jap-105 poplar clone (P. nigra x P. maximowiczii allometric relations were analyzed by regression methods aimed at the creation of the yield estimation methodology at a testing site in Domanínek. Altogether, the twelve polynomial dependences of particular measured quantities approved the high empirical data conformity with the tested regression model (correlation index from 0.9033 to 0.9967. Within the forward stepwise regression, factors were selected, which explain best examined estimates of the total biomass DM; i.e. d.b.h. and stem height. Furthermore, the KESTEMONT’s (1971 mo­del was verified with a satisfying conformity as well. Approving presented yield estimation methods, the presented models will be checked in a large-scale field trial.

Effect of different tillage intensity on yields and yield-forming factors in winter wheat

Directory of Open Access Journals (Sweden)

Martin Houšť

2012-01-01

Full Text Available The paper presents results of a study on application of minimum tillage technologies when growing winter wheat. Experiments were performed in the sugar-beet-growing region with loamy chernozem within the period of 2005–2009. Aanalysed and evaluated were effects of different methods of soil processing on yield-forming factors in stands of winter wheat grown after three different preceding crops (i.e. alfalfa, maize for silage and pea. Evaluated were the following four variants of tillage: (1 conventional ploughing to the depth of 0.22 m (Variant 1; (2 ploughing to the depth of 0.15 m (Variant 2; (3 direct sowing into the untilled soil (Variant 3, and (4 shallow tillage to the depth of 0.10 m (Variant 4.The effect of different tillage intensity on winter wheat yields was statistically non-significant after all forecrops. After alfalfa, the highest and the lowest average yields were recorded in Variant 2 (i.e. with ploughing to the depth of 0.15 m and Variant 3 (direct sowing into the untilled soil, respectively. After maize grown for silage, higher yields were obtained in Variant 2 and Variant 1 (conventional ploughing while in Variants 4 and 3 the obtained yields were lower. When growing winter wheat after pea as a preceding crop, the highest and the lowest average yields were recorded after direct sowing (Variant 3 and in Variant 1 (i.e. ploughing to the depth of 0.22 m, respectively. Results of studies on effect of different tillage technologies on yields of winter wheat crops indicate that under the given pedological and climatic conditions it is possible to apply methods of reduced tillage intensity. However, the choice of the corresponding technology must be performed with regard to the type of preceding crop.

CONVERSION PRODUCT STRUCTURE AS TOOL TO INCREASE YIELD PROCESSING ORGANIZATIONS

Directory of Open Access Journals (Sweden)

A. I. Khorev

2014-01-01

Full Text Available The authors' analysis of the performance of organizations, processing raw materials of agricultural origin, in particular, dealing with meat processing, identified the need to develop tools to increase their profitability. Unlike common approaches to assessing the profitability of the processing organizations, taking into account only the interests of the organization's leadership and buyers of products, the authors proposed and implemented a concept based on the interests of participants in the triune balance business activities: owners of capital, management organizations and consumers. As one of the tools for improving the yield of processing organizations are invited to transform their product mix of economic evaluations of profitability of each product line positions. Russian researchers income from product sales are traditionally measured by indicators such as net income, income from sales, profit margins and profitability level - in terms of return on sales. The disadvantage of using these indicators, according to the authors, is their lack of objectivity in the evaluation of the effectiveness of investment business owners. In this work was used unconventional and non-proliferation in the Russian practice, the rate of economic value added (EVA, a built - in system of profitability assortment positions. As indicators, the production of a particular product line units proposed and used two quantitative indicators - EVA level per unit of production and profitability of production (for EVA, as well as a quality parameter - the level of demand. Developed by the evaluation program transformation product structure represented as a matrix management capabilities, allowing to achieve a balance of interests of the triune main participants in business activity.

Yield trends and yield gap analysis of major crops in the world

OpenAIRE

Hengsdijk, H.; Langeveld, J.W.A.

2009-01-01

This study aims to quantify the gap between current and potential yields of major crops in the world, and the production constraints that contribute to this yield gap. Using an expert-based evaluation of yield gaps and the literature, global and regional yields and yield trends of major crops are quantified, yield gaps evaluated by crop experts, current yield progress by breeding estimated, and different yield projections compared. Results show decreasing yield growth for wheat and rice, but ...

Estimation of biogas and methane yields in an UASB treating potato starch processing wastewater with backpropagation artificial neural network.

Science.gov (United States)

Antwi, Philip; Li, Jianzheng; Boadi, Portia Opoku; Meng, Jia; Shi, En; Deng, Kaiwen; Bondinuba, Francis Kwesi

2017-03-01

Three-layered feedforward backpropagation (BP) artificial neural networks (ANN) and multiple nonlinear regression (MnLR) models were developed to estimate biogas and methane yield in an upflow anaerobic sludge blanket (UASB) reactor treating potato starch processing wastewater (PSPW). Anaerobic process parameters were optimized to identify their importance on methanation. pH, total chemical oxygen demand, ammonium, alkalinity, total Kjeldahl nitrogen, total phosphorus, volatile fatty acids and hydraulic retention time selected based on principal component analysis were used as input variables, whiles biogas and methane yield were employed as target variables. Quasi-Newton method and conjugate gradient backpropagation algorithms were best among eleven training algorithms. Coefficient of determination (R 2 ) of the BP-ANN reached 98.72% and 97.93% whiles MnLR model attained 93.9% and 91.08% for biogas and methane yield, respectively. Compared with the MnLR model, BP-ANN model demonstrated significant performance, suggesting possible control of the anaerobic digestion process with the BP-ANN model. Copyright © 2016 Elsevier Ltd. All rights reserved.

Accelerated yield learning in agressive lithography

Science.gov (United States)

Monahan, Kevin M.; Ashkenaz, Scott M.; Chen, Xing; Lord, Patrick J.; Merrill, Mark A.; Quattrini, Rich; Wiley, James N.

2000-06-01

As exposure wavelengths decrease from 248 nm to 193, 157, and even 13 nm (EUV), small process defects can cause collapse of the lithographic process window near the limits of resolution, particularly for the gate and contact structures in high- performance devices. Such sensitivity poses a challenge for lithography process module control. In this work, we show that yield loss can be caused by a combination of macro, micro, CD, and overlay defects. A defect is defined as any yield- affecting process variation. Each defect, regardless of cause, is assumed to have a specific 'kill potential.' The accuracy of the lithographic yield model can be improved by identifying those defects with the highest kill potential or, more importantly, those that pose the highest economic risk. Such economic considerations have led us to develop a simple heuristic model for understanding sampling strategies in defect metrology and for linking metrology capability to yield and profitability.

Effect of temperature, time, and milling process on yield, flavonoid, and total phenolic content of Zingiber officinale water extract

Science.gov (United States)

Andriyani, R.; Kosasih, W.; Ningrum, D. R.; Pudjiraharti, S.

2017-03-01

Several parameters such as temperature, time of extraction, and size of simplicia play significant role in medicinal herb extraction. This study aimed to investigate the effect of those parameters on yield extract, flavonoid, and total phenolic content in water extract of Zingiber officinale. The temperatures used were 50, 70 and 90°C and the extraction times were 30, 60 and 90 min. Z. officinale in the form of powder and chips were used to study the effect of milling treatment. The correlation among those variables was analysed using ANOVA two-way factors without replication. The result showed that time and temperature did not influence the yield of extract of Powder simplicia. However, time of extraction influenced the extract of simplicia treated without milling process. On the other hand, flavonoid and total phenolic content were not influenced by temperature, time, and milling treatment.

Analysis of effects of updated decay and fission yield data on ORIGEN 2 results

International Nuclear Information System (INIS)

Daniel, P.R.

1993-01-01

Work has been performed to improve the accuracy of ORIGEN2 results by updating both the decay library and the fission yield data in the cross-section library. This effort was performed under the auspices of Oak Ridge National Laboratory (ORNL) to ensure that ORIGEN2 uses the most up-to-date data. The impact of the new data was then quantitatively evaluated by solving a set of standard light water reactor (LWR) problems solved with ORIGEN2. The ORIGEN code, developed at ORNL in the late 1960's, is a point depletion code used to determine the composition and characteristics of spent fuel. The results from calculations performed with the code often form the basis for the study and design of reprocessing plants, spent-fuel shipping casks, waste treatment systems, and disposal facilities. The decay data were updated using data from ENDF/B-VI; fission yield data were updated using data from ENDF/B-V. The impact of these new data was then evaluated

Evaluation of the Parameters and Conditions of Process in the Ethylbenzene Dehydrogenation with Application of Permselective Membranes to Enhance Styrene Yield.

Science.gov (United States)

Araújo, Paulo Jardel P; Leite, Manuela Souza; Ravagnani, Teresa M Kakuta

2016-01-01

Styrene is an important monomer in the manufacture of thermoplastic. Most of it is produced by the catalytic dehydrogenation of ethylbenzene. In this process that depends on reversible reactions, the yield is usually limited by the establishment of thermodynamic equilibrium in the reactor. The styrene yield can be increased by using a hybrid process, with reaction and separation simultaneously. It is proposed using permselective composite membrane to remove hydrogen and thus suppress the reverse and secondary reactions. This paper describes the simulation of a dehydrogenation process carried out in a tubular fixed-bed reactor wrapped in a permselective composite membrane. A mathematical model was developed, incorporating the various mass transport mechanisms found in each of the membrane layers and in the catalytic fixed bed. The effects of the reactor feed conditions (temperature, steam-to-oil ratio, and the weight hourly space velocity), the fixed-bed geometry (length, diameter, and volume), and the membrane geometry (thickness of the layers) on the styrene yield were analyzed. These variables were used to determine experimental conditions that favour the production of styrene. The simulation showed that an increase of 40.98% in the styrene yield, compared to a conventional fixed-bed process, could be obtained by wrapping the reactor in a permselective composite membrane.

Evaluation of the Parameters and Conditions of Process in the Ethylbenzene Dehydrogenation with Application of Permselective Membranes to Enhance Styrene Yield

Directory of Open Access Journals (Sweden)

Paulo Jardel P. Araújo

2016-01-01

Full Text Available Styrene is an important monomer in the manufacture of thermoplastic. Most of it is produced by the catalytic dehydrogenation of ethylbenzene. In this process that depends on reversible reactions, the yield is usually limited by the establishment of thermodynamic equilibrium in the reactor. The styrene yield can be increased by using a hybrid process, with reaction and separation simultaneously. It is proposed using permselective composite membrane to remove hydrogen and thus suppress the reverse and secondary reactions. This paper describes the simulation of a dehydrogenation process carried out in a tubular fixed-bed reactor wrapped in a permselective composite membrane. A mathematical model was developed, incorporating the various mass transport mechanisms found in each of the membrane layers and in the catalytic fixed bed. The effects of the reactor feed conditions (temperature, steam-to-oil ratio, and the weight hourly space velocity, the fixed-bed geometry (length, diameter, and volume, and the membrane geometry (thickness of the layers on the styrene yield were analyzed. These variables were used to determine experimental conditions that favour the production of styrene. The simulation showed that an increase of 40.98% in the styrene yield, compared to a conventional fixed-bed process, could be obtained by wrapping the reactor in a permselective composite membrane.

Optimizing rice yields while minimizing yield-scaled global warming potential.

Science.gov (United States)

Pittelkow, Cameron M; Adviento-Borbe, Maria A; van Kessel, Chris; Hill, James E; Linquist, Bruce A

2014-05-01

To meet growing global food demand with limited land and reduced environmental impact, agricultural greenhouse gas (GHG) emissions are increasingly evaluated with respect to crop productivity, i.e., on a yield-scaled as opposed to area basis. Here, we compiled available field data on CH4 and N2 O emissions from rice production systems to test the hypothesis that in response to fertilizer nitrogen (N) addition, yield-scaled global warming potential (GWP) will be minimized at N rates that maximize yields. Within each study, yield N surplus was calculated to estimate deficit or excess N application rates with respect to the optimal N rate (defined as the N rate at which maximum yield was achieved). Relationships between yield N surplus and GHG emissions were assessed using linear and nonlinear mixed-effects models. Results indicate that yields increased in response to increasing N surplus when moving from deficit to optimal N rates. At N rates contributing to a yield N surplus, N2 O and yield-scaled N2 O emissions increased exponentially. In contrast, CH4 emissions were not impacted by N inputs. Accordingly, yield-scaled CH4 emissions decreased with N addition. Overall, yield-scaled GWP was minimized at optimal N rates, decreasing by 21% compared to treatments without N addition. These results are unique compared to aerobic cropping systems in which N2 O emissions are the primary contributor to GWP, meaning yield-scaled GWP may not necessarily decrease for aerobic crops when yields are optimized by N fertilizer addition. Balancing gains in agricultural productivity with climate change concerns, this work supports the concept that high rice yields can be achieved with minimal yield-scaled GWP through optimal N application rates. Moreover, additional improvements in N use efficiency may further reduce yield-scaled GWP, thereby strengthening the economic and environmental sustainability of rice systems. © 2013 John Wiley & Sons Ltd.

Liquid-borne nano particles impact on the random yield during critical processes in IC’s production

NARCIS (Netherlands)

Wali, F.; Knotter, D. Martin; Kuper, F.G.

2008-01-01

Semiconductor industry faces a continuous challenge to decrease the transistor size as well as to increase the yield by eliminating defect sources. One of the sources of particle defects is ultra pure water used in different production tools at different stages of processing. In this paper, particle

Cross section of α-induced reactions on iridium isotopes obtained from thick target yield measurement for the astrophysical γ process

Directory of Open Access Journals (Sweden)

T. Szücs

2018-01-01

Full Text Available The stellar reaction rates of radiative α-capture reactions on heavy isotopes are of crucial importance for the γ process network calculations. These rates are usually derived from statistical model calculations, which need to be validated, but the experimental database is very scarce. This paper presents the results of α-induced reaction cross section measurements on iridium isotopes carried out at first close to the astrophysically relevant energy region. Thick target yields of 191Ir(α,γ195Au, 191Ir(α,n194Au, 193Ir(α,n196mAu, 193Ir(α,n196Au reactions have been measured with the activation technique between Eα=13.4 MeV and 17 MeV. For the first time the thick target yield was determined with X-ray counting. This led to a previously unprecedented sensitivity. From the measured thick target yields, reaction cross sections are derived and compared with statistical model calculations. The recently suggested energy-dependent modification of the α+nucleus optical potential gives a good description of the experimental data.

Yield, yield components and dry matter digestibility of alfalfa experimental populations

Directory of Open Access Journals (Sweden)

Katić Slobodan

2010-01-01

Full Text Available Alfalfa is the most important forage crop grown in the temperate regions. It is cultivated for production of vegetative aerial mass used fresh or as hay, and recently as haylage and silage. In many centres worldwide, efforts are made to breed and create new alfalfa cultivars with both higher yields and of higher nutritional value. The aim of this paper was to determine yield and digestibility of 12 experimental populations of alfalfa, and to compare their results to the yields of well-known domestic alfalfa commercial cultivars. The results show significant differences in yield of green forage and dry matter among alfalfa populations, as well as in yield components, height, proportion of leaves in yield and growth rate (tab. 1, 2 and 3. Differences between in vitro digestible dry matter (% and yields of in vitro digestible dry matter (t ha-1 were also significant (tab. 5 and 6. Yield and quality of experimental populations were at the same level or higher than of control cultivars. Synthetic SINUSA exceeded the control cutivars (NS Mediana ZMS V and Banat VS in yield and quality of dry matter. .

Production of intermediate vector meson resonances in the process {tau}{yields}{pi}''{+-}{pi}''0{nu}

Energy Technology Data Exchange (ETDEWEB)

Casaus, J; Mana, C

1997-07-01

We present a study on the invariant mass distribution of {pi}''{+-}{pi}''0 pairs produced in the process {tau}{yields}{pi}''{+-}{pi}''0{nu} . The analysis is based on a sample of 33,096 events collected by the L3 detector between 1991 and 1994. The data is not inconsistent with the hypothesis that the process is being mediated by the p(770) meson alone but is in better agreement with the inclusion of an extra {rho} resonance in the decay of the tau lepton. (Author) 10 refs.

Winter cover crops on processing tomato yield, quality, pest pressure, nitrogen availability, and profit margins.

Science.gov (United States)

Belfry, Kimberly D; Trueman, Cheryl; Vyn, Richard J; Loewen, Steven A; Van Eerd, Laura L

2017-01-01

Much of cover crop research to date focuses on key indicators of impact without considering the implications over multiple years, in the absence of a systems-based approach. To evaluate the effect of three years of autumn cover crops on subsequent processing tomato (Solanum lycopersicum L.) production in 2010 and 2011, a field split-split-plot factorial design trial with effects of cover crop type, urea ammonium nitrate fertilizer rate (0 or 140 kg N ha-1 preplant broadcast incorporated) and tomato cultivar (early vs. late) was conducted. The main plot factor, cover crop, included a no cover crop control, oat (Avena sativa L.), winter cereal rye (hereafter referred to as rye) (Secale cereale L.), oilseed radish (OSR) (Raphanus sativus L. var. oleiferus Metzg Stokes), and mix of OSR and rye (OSR + rye) treatments. Cover crop biomass of 0.5 to 2.8 and 1.7 to 3.1 Mg ha-1 was attained in early Oct. and the following early May, respectively. In general, OSR increased soil mineral N during cover crop growth and into the succeeding summer tomato growing season, while the remaining cover crops did not differ from the no cover crop control. The lack of a cover crop by N rate interaction in soil and plant N analyses at harvest suggests that growers may not need to modify N fertilizer rates to tomatoes based on cover crop type. Processing tomato fruit quality at harvest (rots, insect or disease damage, Agtron colour, pH, or natural tomato soluble solids (NTSS)) was not affected by cover crop type. In both years, marketable yield in the no cover crop treatment was lower or not statistically different than all planted cover crops. Partial profit margins over both years were 1320 $ ha-1 higher with OSR and $960 higher with oat compared to the no cover crop control. Thus, results from a systems-based approach suggest that the cover crops tested had no observed negative impact on processing tomato production and have the potential to increase marketable yield and profit margins.

Winter cover crops on processing tomato yield, quality, pest pressure, nitrogen availability, and profit margins.

Directory of Open Access Journals (Sweden)

Kimberly D Belfry

Full Text Available Much of cover crop research to date focuses on key indicators of impact without considering the implications over multiple years, in the absence of a systems-based approach. To evaluate the effect of three years of autumn cover crops on subsequent processing tomato (Solanum lycopersicum L. production in 2010 and 2011, a field split-split-plot factorial design trial with effects of cover crop type, urea ammonium nitrate fertilizer rate (0 or 140 kg N ha-1 preplant broadcast incorporated and tomato cultivar (early vs. late was conducted. The main plot factor, cover crop, included a no cover crop control, oat (Avena sativa L., winter cereal rye (hereafter referred to as rye (Secale cereale L., oilseed radish (OSR (Raphanus sativus L. var. oleiferus Metzg Stokes, and mix of OSR and rye (OSR + rye treatments. Cover crop biomass of 0.5 to 2.8 and 1.7 to 3.1 Mg ha-1 was attained in early Oct. and the following early May, respectively. In general, OSR increased soil mineral N during cover crop growth and into the succeeding summer tomato growing season, while the remaining cover crops did not differ from the no cover crop control. The lack of a cover crop by N rate interaction in soil and plant N analyses at harvest suggests that growers may not need to modify N fertilizer rates to tomatoes based on cover crop type. Processing tomato fruit quality at harvest (rots, insect or disease damage, Agtron colour, pH, or natural tomato soluble solids (NTSS was not affected by cover crop type. In both years, marketable yield in the no cover crop treatment was lower or not statistically different than all planted cover crops. Partial profit margins over both years were 1320 $ ha-1 higher with OSR and $960 higher with oat compared to the no cover crop control. Thus, results from a systems-based approach suggest that the cover crops tested had no observed negative impact on processing tomato production and have the potential to increase marketable yield and profit

Recent Results from Lohengrin on Fission Yields and Related Decay Properties

Science.gov (United States)

Serot, O.; Amouroux, C.; Bidaud, A.; Capellan, N.; Chabod, S.; Ebran, A.; Faust, H.; Kessedjian, G.; Köester, U.; Letourneau, A.; Litaize, O.; Martin, F.; Materna, T.; Mathieu, L.; Panebianco, S.; Regis, J.-M.; Rudigier, M.; Sage, C.; Urban, W.

2014-05-01

The Lohengrin mass spectrometer is one of the 40 instruments built around the reactor of the Institute Laue-Langevin (France) which delivers a very intense thermal neutron flux. Usually, Lohengrin was combined with a high-resolution ionization chamber in order to obtain good nuclear charge discrimination within a mass line, yielding an accurate isotopic yield determination. Unfortunately, this experimental procedure can only be applied for fission products with a nuclear charge less than about 42, i.e. in the light fission fragment region. Since 2008, a large collaboration has started with the aim of studying various fission aspects, mainly in the heavy fragment region. For that, a new experimental setup which allows isotopic identification by γ-ray spectrometry has been developed and validated. This technique was applied on the 239Pu(nth,f) reaction where about 65 fission product yields were measured with an uncertainty that has been reduced on average by a factor of 2 compared with what was that previously available in nuclear data libraries. The same γ-ray spectrometric technique is currently being applied to the study of the 233U(nth,f) reaction. Our aim is to deduce charge and mass distributions of the fission products and to complete the experimental data that exist mainly for light fission fragments. The measurement of 41 mass yields from the 241Am(2nth,f) reaction has been also performed. In addition to these activities on fission yield measurements, various new nanosecond isomers were discovered. Their presence can be revealed from a strong deformed ionic charge distribution compared to a 'normal' Gaussian shape. Finally, a new neutron long-counter detector designed to have a detection efficiency independent of the detected neutron energy has been built. Combining this neutron device with a Germanium detector and a beta-ray detector array allowed us to measure the beta-delayed neutron emission probability Pn of some important fission products for reactor

Cooling treatment of olive paste during the oil processing: Impact on the yield and extra virgin olive oil quality.

Science.gov (United States)

Veneziani, G; Esposto, S; Taticchi, A; Urbani, S; Selvaggini, R; Di Maio, I; Sordini, B; Servili, M

2017-04-15

In recent years, the temperature of processed olives in many olive-growing areas was often close to 30°C, due to the global warming and an early harvesting period. Consequently, the new trends in the extraction process have to include the opportunity to cool the olives or olive paste before processing to obtain high quality EVOO. A tubular thermal exchanger was used for a rapid cooling treatment (CT) of olive paste after crushing. The results did not show a significant difference in the oil yield or any modifications in the legal parameters. The cooling process determined a significant improvement of phenolic compounds in all the three Italian cultivar EVOOs analyzed, whereas the volatile compounds showed a variability largely affected by the genetic origin of the olives with C 6 aldehydes that seem to be more stable than C 6 alcohols and esters. Copyright © 2016 Elsevier Ltd. All rights reserved.

Modelling of the process yields of a whey fermentation

Energy Technology Data Exchange (ETDEWEB)

Blakebrough, N; Moresi, M

1981-01-01

The biomass yields (y) and COD reduction efficiencies (eta) of a whey fermentation by Kluyveromyces fragilis were studied in a 100-l fermenter at various stirrer speeds and lactose concentrations, and compared to those obtained in 10-l and 15-l fermenters at constant values of the oxygen transfer coefficient (kla) and air velocity. The empirical models previously constructed by using the 15-l fermenter data could be used to predict the yields on the other scales by calculating for each run the 15-l fermenter which would provide the same oxygen transfer coefficient measured by the sulfite method on each fermenter under study. To make this model independent of stirrer speeds used in each generic fermenter, the effect of aeration and mixing was incorporated into an overall parameter (kla) and the values of y and eta were correlated only with temperature, lactose level and kla, since these variables were approximately orthogonal. The validity of this model was finally checked against the yields reported by Wasserman et al. (1961) in a 6-cubic metre fermenter, thus confirming the capability of the model to provide a reliable basis for further scale-up on the production scale. (Refs. 17).

ENDF/B yield evaluation for 1992: Methods and content

International Nuclear Information System (INIS)

England, T.R.; Rider, B.F.

1992-01-01

The basic evaluation process, completed in May 1992, for 60 independent, plus corresponding cumulative yield sets is described thirty-six fissioning nuclides at one-or-more neutron fission energies or spontaneous fission are included. The resulting recommended yields include approximately 1200 nuclides per set; these will be slightly extended to encompass all nuclides in the ENDF/B-VI decay files and issued as the second release of ENDF/B-VI yields. All current yield sets in ENDF/B-VI have been reevaluated using ∼3000 new measurements and model parameters for distribution along mass chains. Compiled measurements through 1992 will be included in the documentation of the recommended yields. This paper can only summarize the primary features of the evaluations

Satellite-based assessment of grassland yields

Science.gov (United States)

Grant, K.; Siegmund, R.; Wagner, M.; Hartmann, S.

2015-04-01

Cutting date and frequency are important parameters determining grassland yields in addition to the effects of weather, soil conditions, plant composition and fertilisation. Because accurate and area-wide data of grassland yields are currently not available, cutting frequency can be used to estimate yields. In this project, a method to detect cutting dates via surface changes in radar images is developed. The combination of this method with a grassland yield model will result in more reliable and regional-wide numbers of grassland yields. For the test-phase of the monitoring project, a study area situated southeast of Munich, Germany, was chosen due to its high density of managed grassland. For determining grassland cutting robust amplitude change detection techniques are used evaluating radar amplitude or backscatter statistics before and after the cutting event. CosmoSkyMed and Sentinel-1A data were analysed. All detected cuts were verified according to in-situ measurements recorded in a GIS database. Although the SAR systems had various acquisition geometries, the amount of detected grassland cut was quite similar. Of 154 tested grassland plots, covering in total 436 ha, 116 and 111 cuts were detected using CosmoSkyMed and Sentinel-1A radar data, respectively. Further improvement of radar data processes as well as additional analyses with higher sample number and wider land surface coverage will follow for optimisation of the method and for validation and generalisation of the results of this feasibility study. The automation of this method will than allow for an area-wide and cost efficient cutting date detection service improving grassland yield models.

Measurements of beryllium sputtering yields at JET

Science.gov (United States)

Jet-Efda Contributors Stamp, M. F.; Krieger, K.; Brezinsek, S.

2011-08-01

The lifetime of the beryllium first wall in ITER will depend on erosion and redeposition processes. The physical sputtering yields for beryllium (both deuterium on beryllium (Be) and Be on Be) are of crucial importance since they drive the erosion process. Literature values of experimental sputtering yields show an order of magnitude variation so predictive modelling of ITER wall lifetimes has large uncertainty. We have reviewed the old beryllium yield experiments on JET and used current beryllium atomic data to produce revised beryllium sputtering yields. These experimental measurements have been compared with a simple physical sputtering model based on TRIM.SP beryllium yield data. Fair agreement is seen for beryllium yields from a clean beryllium limiter. However the yield on a beryllium divertor tile (with C/Be co-deposits) shows poor agreement at low electron temperatures indicating that the effect of the higher sputtering threshold for beryllium carbide is important.

Association between Empirically Estimated Monsoon Dynamics and Other Weather Factors and Historical Tea Yields in China: Results from a Yield Response Model

Directory of Open Access Journals (Sweden)

Rebecca Boehm

2016-04-01

Full Text Available Farmers in China’s tea-growing regions report that monsoon dynamics and other weather factors are changing and that this is affecting tea harvest decisions. To assess the effect of climate change on tea production in China, this study uses historical weather and production data from 1980 to 2011 to construct a yield response model that estimates the partial effect of weather factors on tea yields in China, with a specific focus on East Asian Monsoon dynamics. Tea (Camellia sinensis (L. Kunze has not been studied using these methods even though it is an important crop for human nutrition and the economic well-being of rural communities in many countries. Previous studies have approximated the monsoon period using historical average onset and retreat dates, which we believe limits our understanding of how changing monsoon patterns affect crop productivity. In our analysis, we instead estimate the monsoon season across China’s tea growing regions empirically by identifying the unknown breakpoints in the year-by-province cumulative precipitation. We find that a 1% increase in the monsoon retreat date is associated with 0.481%–0.535% reduction in tea yield. In the previous year, we also find that a 1% increase in the date of the monsoon retreat is associated with a 0.604% decrease in tea yields. For precipitation, we find that a 1% increase in average daily precipitation occurring during the monsoon period is associated with a 0.184%–0.262% reduction in tea yields. In addition, our models show that 1% increase in the average daily monsoon precipitation from the previous growing season is associated with 0.258%–0.327% decline in yields. We also find that a 1% decrease in solar radiation in the previous growing season is associated with 0.554%-0.864% decrease in tea yields. These findings suggest the need for adaptive management and harvesting strategies given climate change projections and the known negative association between excess

Influence of non-LTE radiation ablation on imploding neutron yield

International Nuclear Information System (INIS)

Sheng Jiatian; Li Yunsheng; Gao Yaomin; Li Meng; Feng Tinggui; Zhang Lifa; Zeng Xiancai; Mou Wenyong; Feng Jie; Chen Jiabin

2005-01-01

The process of radiative ablation and neutron yields of DD-capsule with CH shell implosion driven by Plank spectrum and nonequilibrium spectrum radiation fields was numerically studied using 1-D RDMG code of multigroup-nonequilibrium radiation hydrodynamics. The simulation results were compared with the experimental results. The results of the simulation show that the nonequilibrium of energy spectrum distribution of the hohlraum radiation source, especially the M-band of it, will preheat DD in the capsule obviously, decrease the compressing ratio, electron and ion temperatures of DD gas, and therefore decrease the neutron yields markedly. The simulation results also show that the law of decreasing of neutron yields with increasing of the CH-sell thickness is in agreement with the experiment basically. (authors)

Impact of thermal processing on sulforaphane yield from broccoli ( Brassica oleracea L. ssp. italica).

Science.gov (United States)

Wang, Grace C; Farnham, Mark; Jeffery, Elizabeth H

2012-07-11

In broccoli, sulforaphane forms when the glucosinolate glucoraphanin is hydrolyzed by the endogenous plant thiohydrolase myrosinase. A myrosinase cofactor directs hydrolysis away from the formation of bioactive sulforaphane and toward an inactive product, sulforaphane nitrile. The cofactor is more heat sensitive than myrosinase, presenting an opportunity to preferentially direct hydrolysis toward sulforaphane formation through regulation of thermal processing. Four broccoli cultivars were microwave heated, boiled, or steamed for various lengths of time. Production of nitrile during hydrolysis of unheated broccoli varied among cultivars from 91 to 52% of hydrolysis products (Pinnacle > Marathon > Patriot > Brigadier). Boiling and microwave heating caused an initial loss of nitrile, with a concomitant increase in sulforaphane, followed by loss of sulforaphane, all within 1 min. In contrast, steaming enhanced sulforaphane yield between 1.0 and 3.0 min in all but Brigadier. These data are proof of concept that steaming for 1.0-3.0 min provides less nitrile and more sulforaphane yield from a broccoli meal.

Yields of historical exploration programs

International Nuclear Information System (INIS)

Huslende, T.

1995-01-01

The paper relates to an method of evaluation developed for analysing the yield of historical exploration programs by computerized simulation. The most important elements show in coarse features how the results can be used in the different analyses. The evaluation is to be executed annually for the comparison and sorting of data from different offshore sites. Topics are exploration evaluation study, evaluation process, handling of exploration costs, discovered reserves, development projects, cash flow analysis, analysis of results, finding cost, international comparison. 1 ref., 11 figs

A RAPID Method for Blood Processing to Increase the Yield of Plasma Peptide Levels in Human Blood.

Science.gov (United States)

Teuffel, Pauline; Goebel-Stengel, Miriam; Hofmann, Tobias; Prinz, Philip; Scharner, Sophie; Körner, Jan L; Grötzinger, Carsten; Rose, Matthias; Klapp, Burghard F; Stengel, Andreas

2016-04-28

Research in the field of food intake regulation is gaining importance. This often includes the measurement of peptides regulating food intake. For the correct determination of a peptide's concentration, it should be stable during blood processing. However, this is not the case for several peptides which are quickly degraded by endogenous peptidases. Recently, we developed a blood processing method employing Reduced temperatures, Acidification, Protease inhibition, Isotopic exogenous controls and Dilution (RAPID) for the use in rats. Here, we have established this technique for the use in humans and investigated recovery, molecular form and circulating concentration of food intake regulatory hormones. The RAPID method significantly improved the recovery for (125)I-labeled somatostatin-28 (+39%), glucagon-like peptide-1 (+35%), acyl ghrelin and glucagon (+32%), insulin and kisspeptin (+29%), nesfatin-1 (+28%), leptin (+21%) and peptide YY3-36 (+19%) compared to standard processing (EDTA blood on ice, p processing, while after standard processing 62% of acyl ghrelin were degraded resulting in an earlier peak likely representing desacyl ghrelin. After RAPID processing the acyl/desacyl ghrelin ratio in blood of normal weight subjects was 1:3 compared to 1:23 following standard processing (p = 0.03). Also endogenous kisspeptin levels were higher after RAPID compared to standard processing (+99%, p = 0.02). The RAPID blood processing method can be used in humans, yields higher peptide levels and allows for assessment of the correct molecular form.

Rice yield estimation with multi-temporal Radarsat-2 data

Science.gov (United States)

Chen, Chi-Farn; Son, Nguyen-Thanh; Chen, Cheng-Ru

2015-04-01

Rice is the most important food crop in Taiwan. Monitoring rice crop yield is thus crucial for agronomic planners to formulate successful strategies to address national food security and rice grain export issues. However, there is a real challenge for this monitoring purpose because the size of rice fields in Taiwan was generally small and fragmented, and the cropping calendar was also different from region to region. Thus, satellite-based estimation of rice crop yield requires the data that have sufficient spatial and temporal resolutions. This study aimed to develop models to estimate rice crop yield from multi-temporal Radarsat-2 data (5 m resolution). Data processing were carried out for the first rice cropping season from February to July in 2014 in the western part of Taiwan, consisting of four main steps: (1) constructing time-series backscattering coefficient data, (2) spatiotemporal noise filtering of the time-series data, (3) establishment of crop yield models using the time-series backscattering coefficients and in-situ measured yield data, and (4) model validation using field data and government's yield statistics. The results indicated that backscattering behavior varied from region to region due to changes in cultural practices and cropping calendars. The highest correlation coefficient (R2 > 0.8) was obtained at the ripening period. The robustness of the established models was evaluated by comparisons between the estimated yields and in-situ measured yield data showed satisfactory results, with the root mean squared error (RMSE) smaller than 10%. Such results were reaffirmed by the correlation analysis between the estimated yields and government's rice yield statistics (R2 > 0.8). This study demonstrates advantages of using multi-temporal Radarsat-2 backscattering data for estimating rice crop yields in Taiwan prior to the harvesting period, and thus the methods were proposed for rice yield monitoring in other regions.

Anaerobic digestion of microalgae residues resulting from the biodiesel production process

International Nuclear Information System (INIS)

Ehimen, E.A.; Sun, Z.F.; Carrington, C.G.; Birch, E.J.; Eaton-Rye, J.J.

2011-01-01

The recovery of methane from post transesterified microalgae residues has the potential to improve the renewability of the 'microalgae biomass to biodiesel' conversion process as well as reduce its cost and environmental impact. This paper deals with the anaerobic digestion of microalgae biomass residues (post transesterification) using semi-continuously fed reactors. The influence of substrate loading concentrations and hydraulic retention times on the specific methane yield of the anaerobically digested microalgae residues was investigated. The co-digestion of the microalgae residues with glycerol as well as the influence of temperature was also examined. It was found that the hydraulic retention period was the most significant variable affecting methane production from the residues, with periods (>5 days) corresponding to higher energy recovery. The methane yield was also improved by a reduction in the substrate loading rates, with an optimum substrate carbon to nitrogen ratio of 12.44 seen to be required for the digestion process.

Excitonic processes and their contribution to non-proportionality observed in the light yield of inorganic scintillators

International Nuclear Information System (INIS)

Singh, J.; Koblov, A.

2013-01-01

Using the derived expression for the light yield in a scintillator, the influence of linear radiative and non-radiative (quenching) rates on the non-proportionality in light yield is studied. It is found that if the excitation created within the electron track initiated by a γ-photon incident on a scintillator, remains mainly excitonic, then non-proportionality can be minimized by inventing a scintillator material with linear radiative rate > 10 7 s -1 , linear quenching rate 6 s -1 and track radius ≥ 70 nm along with maintaining the rates of other non-linear processes as discovered earlier. If one can increase the linear radiative rate to 10 9 s -1 , then the non-proportionality can be eliminated at a track radius > 20 nm. (authors)

Introducing capnophilic lactic fermentation in a combined dark-photo fermentation process: a route to unparalleled H2 yields.

Science.gov (United States)

Dipasquale, L; Adessi, A; d'Ippolito, G; Rossi, F; Fontana, A; De Philippis, R

2015-01-01

Two-stage process based on photofermentation of dark fermentation effluents is widely recognized as the most effective method for biological production of hydrogen from organic substrates. Recently, it was described an alternative mechanism, named capnophilic lactic fermentation, for sugar fermentation by the hyperthermophilic bacterium Thermotoga neapolitana in CO2-rich atmosphere. Here, we report the first application of this novel process to two-stage biological production of hydrogen. The microbial system based on T. neapolitana DSM 4359(T) and Rhodopseudomonas palustris 42OL gave 9.4 mol of hydrogen per mole of glucose consumed during the anaerobic process, which is the best production yield so far reported for conventional two-stage batch cultivations. The improvement of hydrogen yield correlates with the increase in lactic production during capnophilic lactic fermentation and takes also advantage of the introduction of original conditions for culturing both microorganisms in minimal media based on diluted sea water. The use of CO2 during the first step of the combined process establishes a novel strategy for biohydrogen technology. Moreover, this study opens the way to cost reduction and use of salt-rich waste as feedstock.

Quantum Yields in Mixed-Conifer Forests and Ponderosa Pine Plantations

Science.gov (United States)

Wei, L.; Marshall, J. D.; Zhang, J.

2008-12-01

Most process-based physiological models require canopy quantum yield of photosynthesis as a starting point to simulate carbon sequestration and subsequently gross primary production (GPP). The quantum yield is a measure of photosynthetic efficiency expressed in moles of CO2 assimilated per mole of photons absorbed; the process is influenced by environmental factors. In the summer 2008, we measured quantum yields on both sun and shade leaves for four conifer species at five sites within Mica Creek Experimental Watershed (MCEW) in northern Idaho and one conifer species at three sites in northern California. The MCEW forest is typical of mixed conifer stands dominated by grand fir (Abies grandis (Douglas ex D. Don) Lindl.). In northern California, the three sites with contrasting site qualities are ponderosa pine (Pinus ponderosa C. Lawson var. ponderosa) plantations that were experimentally treated with vegetation control, fertilization, and a combination of both. We found that quantum yields in MCEW ranged from ~0.045 to ~0.075 mol CO2 per mol incident photon. However, there were no significant differences between canopy positions, or among sites or tree species. In northern California, the mean value of quantum yield of three sites was 0.051 mol CO2/mol incident photon. No significant difference in quantum yield was found between canopy positions, or among treatments or sites. The results suggest that these conifer species maintain relatively consistent quantum yield in both MCEW and northern California. This consistency simplifies the use of a process-based model to accurately predict forest productivity in these areas.

Subprimal purchasing and merchandising decisions for pork: relationship to retail yield and fabrication time.

Science.gov (United States)

Lorenzen, C L; Griffin, D B; Dockerty, T R; Walter, J P; Johnson, H K; Savell, J W

1996-01-01

Boxed pork was obtained to represent four different purchase specifications (different anatomical separation locations and[or] external fat trim levels) common in the pork industry to conduct a study of retail yields and labor requirements. Bone-in loins (n = 180), boneless loins (n = 94), and Boston butts (n = 148) were assigned randomly to fabrication styles within subprimals. When comparing cutting styles within subprimals, it was evident that cutting style affected percentage of retail yield and cutting time. When more bone-in cuts were prepared from bone-in loin subprimals, retail yields ranged from 92.80 +/- .61 to 95.28 +/- .45%, and processing times ranged from 222.57 +/- 10.13 to 318.99 +/- 7.85 s, from the four suppliers. When more boneless cuts were prepared from bone-in loin subprimals, retail yields ranged from 71.12 +/- 1.10 to 77.92 +/- .77% and processing times ranged from 453.49 +/- 8.95 to 631.09 +/- 15.04 s from the different loins. Comparing boneless to bone-in cuts from bone-in loins resulted in lower yields and required greater processing times. Significant variations in yields and times were found within cutting styles. These differences seemed to have been the result of variation in supplier fat trim level and anatomical separation (primarily scribe length).

Selenium Supplementation Affects Physiological and Biochemical Processes to Improve Fodder Yield and Quality of Maize (Zea mays L. under Water Deficit Conditions

Directory of Open Access Journals (Sweden)

Fahim Nawaz

2016-09-01

Full Text Available Climate change is one of the most complex challenges that pose serious threats to livelihoods of poor people who rely heavily on agriculture and livestock particularly in climate-sensitive developing countries of the world. The negative effects of water scarcity, due to climate change, are not limited to productivity food crops but have far-reaching consequences on livestock feed production systems. Selenium (Se is considered essential for animal health and has also been reported to counteract various abiotic stresses in plants however, understanding of Se regulated mechanisms for improving nutritional status of fodder crops remains elusive. We report the effects of exogenous selenium (Se supply on physiological and biochemical processes that may influence green fodder yield and quality of maize (Zea mays L. under drought stress conditions. The plants were grown in lysimeter tanks under natural conditions and were subjected to normal (100% field capacity and water stress (60% field capacity conditions. Foliar spray of Se was carried out before the start of tasseling stage (65 days after sowing and was repeated after one week, whereas water spray was used as a control. Drought stress markedly reduced the water status, pigments and green fodder yield and resulted in low forage quality in water stressed maize plants. Nevertheless, exogenous Se application at 40 mg L-1 resulted in less negative leaf water potential (41% and enhanced relative water contents (30%, total chlorophyll (53%, carotenoid contents (60%, accumulation of total free amino acids (40% and activities of superoxide dismutase (53%, catalase (30%, peroxidase (27% and ascorbate peroxidase (27% with respect to control under water deficit conditions. Consequently, Se regulated processes improved fodder yield (15% and increased crude protein (47%, fibre (10%, nitrogen free extract (10% and Se content (36% but did not affect crude ash content in water stressed maize plants. We propose

Selenium Supplementation Affects Physiological and Biochemical Processes to Improve Fodder Yield and Quality of Maize (Zea mays L.) under Water Deficit Conditions

Science.gov (United States)

Nawaz, Fahim; Naeem, Muhammad; Ashraf, Muhammad Y.; Tahir, Muhammad N.; Zulfiqar, Bilal; Salahuddin, Muhammad; Shabbir, Rana N.; Aslam, Muhammad

2016-01-01

Climate change is one of the most complex challenges that pose serious threats to livelihoods of poor people who rely heavily on agriculture and livestock particularly in climate-sensitive developing countries of the world. The negative effects of water scarcity, due to climate change, are not limited to productivity food crops but have far-reaching consequences on livestock feed production systems. Selenium (Se) is considered essential for animal health and has also been reported to counteract various abiotic stresses in plants, however, understanding of Se regulated mechanisms for improving nutritional status of fodder crops remains elusive. We report the effects of exogenous selenium supply on physiological and biochemical processes that may influence green fodder yield and quality of maize (Zea mays L.) under drought stress conditions. The plants were grown in lysimeter tanks under natural conditions and were subjected to normal (100% field capacity) and water stress (60% field capacity) conditions. Foliar spray of Se was carried out before the start of tasseling stage (65 days after sowing) and was repeated after 1 week, whereas, water spray was used as a control. Drought stress markedly reduced the water status, pigments and green fodder yield and resulted in low forage quality in water stressed maize plants. Nevertheless, exogenous Se application at 40 mg L-1 resulted in less negative leaf water potential (41%) and enhanced relative water contents (30%), total chlorophyll (53%), carotenoid contents (60%), accumulation of total free amino acids (40%) and activities of superoxide dismutase (53%), catalase (30%), peroxidase (27%), and ascorbate peroxidase (27%) with respect to control under water deficit conditions. Consequently, Se regulated processes improved fodder yield (15%) and increased crude protein (47%), fiber (10%), nitrogen free extract (10%) and Se content (36%) but did not affect crude ash content in water stressed maize plants. We propose that Se

Selenium Supplementation Affects Physiological and Biochemical Processes to Improve Fodder Yield and Quality of Maize (Zea mays L.) under Water Deficit Conditions.

Science.gov (United States)

Nawaz, Fahim; Naeem, Muhammad; Ashraf, Muhammad Y; Tahir, Muhammad N; Zulfiqar, Bilal; Salahuddin, Muhammad; Shabbir, Rana N; Aslam, Muhammad

2016-01-01

Climate change is one of the most complex challenges that pose serious threats to livelihoods of poor people who rely heavily on agriculture and livestock particularly in climate-sensitive developing countries of the world. The negative effects of water scarcity, due to climate change, are not limited to productivity food crops but have far-reaching consequences on livestock feed production systems. Selenium (Se) is considered essential for animal health and has also been reported to counteract various abiotic stresses in plants, however, understanding of Se regulated mechanisms for improving nutritional status of fodder crops remains elusive. We report the effects of exogenous selenium supply on physiological and biochemical processes that may influence green fodder yield and quality of maize ( Zea mays L.) under drought stress conditions. The plants were grown in lysimeter tanks under natural conditions and were subjected to normal (100% field capacity) and water stress (60% field capacity) conditions. Foliar spray of Se was carried out before the start of tasseling stage (65 days after sowing) and was repeated after 1 week, whereas, water spray was used as a control. Drought stress markedly reduced the water status, pigments and green fodder yield and resulted in low forage quality in water stressed maize plants. Nevertheless, exogenous Se application at 40 mg L -1 resulted in less negative leaf water potential (41%) and enhanced relative water contents (30%), total chlorophyll (53%), carotenoid contents (60%), accumulation of total free amino acids (40%) and activities of superoxide dismutase (53%), catalase (30%), peroxidase (27%), and ascorbate peroxidase (27%) with respect to control under water deficit conditions. Consequently, Se regulated processes improved fodder yield (15%) and increased crude protein (47%), fiber (10%), nitrogen free extract (10%) and Se content (36%) but did not affect crude ash content in water stressed maize plants. We propose that

Donor management parameters and organ yield: single center results.

Science.gov (United States)

Marshall, George Ryne; Mangus, Richard S; Powelson, John A; Fridell, Jonathan A; Kubal, Chandrashekhar A; Tector, A Joseph

2014-09-01

Management of organ donors in the intensive care unit is an emerging subject in critical care and transplantation. This study evaluates organ yield outcomes for a large number of patients managed by the Indiana Organ Procurement Organization. This is a retrospective review of intensive care unit records from 2008-2012. Donor demographic information and seven donor management parameters (DMP) were recorded at admission, consent, 12 h after consent, and before procurement. Three study groups were created: donors meeting 0-3, 4, or 5-7 DMP. Active donor Organ Procurement Organization management began at consent; so, data analysis focuses on the 12-h postconsent time point. Outcomes included organs transplanted per donor (OTPD) and transplantation of individual solid organs. Complete records for 499 patients were reviewed. Organ yield was 1415 organs of 3992 possible (35%). At 12 h, donors meeting more DMP had more OTPD: 2.2 (0-3) versus 3.0 (4) versus 3.5 (5-7) (P organ except intestine. Oxygen tension, vasopressor use, and central venous pressure were the most frequent independent predictors of organ usage. There were significantly more organs transplanted for donors meeting all three of these parameters (4.5 versus 2.7, P organs, with analysis of individual parameters suggesting that appropriate management of oxygenation, volume status, and vasopressor use could lead to more organs procured per donor. Copyright © 2014 Elsevier Inc. All rights reserved.

Impact of broiler processing scalding and chilling profiles on carcass and breast meat yield.

Science.gov (United States)

Buhr, R J; Walker, J M; Bourassa, D V; Caudill, A B; Kiepper, B H; Zhuang, H

2014-06-01

The effect of scalding and chilling procedures was evaluated on carcass and breast meat weight and yield in broilers. On 4 separate weeks (trials), broilers were subjected to feed withdrawal, weighed, and then stunned and bled in 4 sequential batches (n = 16 broilers/batch, 64 broilers/trial). In addition, breast skin was collected before scalding, after scalding, and after defeathering for proximate analysis. Each batch of 16 carcasses was subjected to either hard (60.0°C for 1.5 min) or soft (52.8°C for 3 min) immersion scalding. Following defeathering and evisceration, 8 carcasses/batch were air-chilled (0.5°C, 120 min, 86% RH) and 8 carcasses/batch were immersion water-chilled (water and ice 0.5°C, 40 min). Carcasses were reweighed individually following evisceration and following chilling. Breast meat was removed from the carcass and weighed within 4 h postmortem. There were significant (P defeathered eviscerated weights did not differ between the scalding and chilling treatments. During air-chilling all carcasses lost weight, resulting in postchill carcass yield of 73.0% for soft-scalded and 71.3% for hard-scalded carcasses, a difference of 1.7%. During water-chilling all carcasses gained weight, resulting in heavier postchill carcass weights (2,031 g) than for air-chilled carcasses (1,899 g). Postchill carcass yields were correspondingly higher for water-chilled carcasses, 78.2% for soft-scalded and 76.1% for hard-scalded carcasses, a difference of 2.1%. Only in trials 1 and 4 was breast meat yield significantly lower for hard-scalded, air-chilled carcasses (16.1 and 17.5%) than the other treatments. Proximate analysis of skin sampled after scalding or defeathering did not differ significantly in moisture (P = 0.2530) or lipid (P = 0.6412) content compared with skin sampled before scalding. Skin protein content was significantly higher (P defeathering. The hard-scalding method used in this experiment did not result in increased skin lipid loss either

High-resolution, regional-scale crop yield simulations for the Southwestern United States

Science.gov (United States)

Stack, D. H.; Kafatos, M.; Medvigy, D.; El-Askary, H. M.; Hatzopoulos, N.; Kim, J.; Kim, S.; Prasad, A. K.; Tremback, C.; Walko, R. L.; Asrar, G. R.

2012-12-01

Over the past few decades, there have been many process-based crop models developed with the goal of better understanding the impacts of climate, soils, and management decisions on crop yields. These models simulate the growth and development of crops in response to environmental drivers. Traditionally, process-based crop models have been run at the individual farm level for yield optimization and management scenario testing. Few previous studies have used these models over broader geographic regions, largely due to the lack of gridded high-resolution meteorological and soil datasets required as inputs for these data intensive process-based models. In particular, assessment of regional-scale yield variability due to climate change requires high-resolution, regional-scale, climate projections, and such projections have been unavailable until recently. The goal of this study was to create a framework for extending the Agricultural Production Systems sIMulator (APSIM) crop model for use at regional scales and analyze spatial and temporal yield changes in the Southwestern United States (CA, AZ, and NV). Using the scripting language Python, an automated pipeline was developed to link Regional Climate Model (RCM) output with the APSIM crop model, thus creating a one-way nested modeling framework. This framework was used to combine climate, soil, land use, and agricultural management datasets in order to better understand the relationship between climate variability and crop yield at the regional-scale. Three different RCMs were used to drive APSIM: OLAM, RAMS, and WRF. Preliminary results suggest that, depending on the model inputs, there is some variability between simulated RCM driven maize yields and historical yields obtained from the United States Department of Agriculture (USDA). Furthermore, these simulations showed strong non-linear correlations between yield and meteorological drivers, with critical threshold values for some of the inputs (e.g. minimum and

Low-temperature wafer-level gold thermocompression bonding: modeling of flatness deviations and associated process optimization for high yield and tough bonds

Science.gov (United States)

Stamoulis, Konstantinos; Tsau, Christine H.; Spearing, S. Mark

2005-01-01

Wafer-level, thermocompression bonding is a promising technique for MEMS packaging. The quality of the bond is critically dependent on the interaction between flatness deviations, the gold film properties and the process parameters and tooling used to achieve the bonds. The effect of flatness deviations on the resulting bond is investigated in the current work. The strain energy release rate associated with the elastic deformation required to overcome wafer bow is calculated. A contact yield criterion is used to examine the pressure and temperature conditions required to flatten surface roughness asperities in order to achieve bonding over the full apparent area. The results are compared to experimental data of bond yield and toughness obtained from four-point bend delamination testing and microscopic observations of the fractured surfaces. Conclusions from the modeling and experiments indicate that wafer bow has negligible effect on determining the variability of bond quality and that the well-bonded area is increased with increasing bonding pressure. The enhanced understanding of the underlying deformation mechanisms allows for a better controlled trade-off between the bonding pressure and temperature.

Radiative corrections in K{yields}{pi}l{sup +}l{sup -} decays

Energy Technology Data Exchange (ETDEWEB)

Kubis, Bastian; Schmidt, Rebekka [Universitaet Bonn, Helmholtz-Institut fuer Strahlen- und Kernphysik (Theorie) and Bethe Center for Theoretical Physics, Bonn (Germany)

2010-11-15

We calculate radiative corrections to the flavor-changing neutral current process K{yields}{pi}l {sup +}l{sup -}, both for charged and neutral kaon decays. While the soft-photon approximation is shown to work well for the muon channels, we discuss the necessity of further phase space cuts with electrons in the final state. It is also shown how to transfer our results to other decays such as {eta}{yields}{gamma}l{sup +} l{sup -} or {omega}{yields}{pi}{sup 0}l{sup +}l{sup -}. (orig.)

High-pressure homogenization of raw and pasteurized milk modifies the yield, composition, and texture of queso fresco cheese.

Science.gov (United States)

Escobar, D; Clark, S; Ganesan, V; Repiso, L; Waller, J; Harte, F

2011-03-01

High-pressure homogenization (HPH) of milk was studied as an alternative processing operation in the manufacturing of queso fresco cheese. Raw and pasteurized (65°C for 30 min) milks were subjected to HPH at 0, 100, 200, and 300 MPa and then used to manufacture queso fresco. The cheeses were evaluated for yield, moisture content, titratable acidity, nitrogen content, whey protein content, yield force, yield strain, and tactile texture by instrumental or trained panel analyses. The combination of HPH and thermal processing of milk resulted in cheeses with increased yield and moisture content. The net amount of protein transferred to the cheese per kilogram of milk remained constant for all treatments except raw milk processed at 300 MPa. The highest cheese yield, moisture content, and crumbliness were obtained for thermally processed milk subjected to HPH at 300 MPa. The principal component analysis of all measured variables showed that the variables yield, moisture content, and crumbliness were strongly correlated to each other and negatively correlated to the variables yield strain, protein content (wet basis), and sensory cohesiveness. It is suggested that the combination of thermal processing and HPH promotes thermally induced denaturation of whey protein, together with homogenization-induced dissociation of casein micelles. The combined effect results in queso fresco containing a thin casein-whey matrix that is able to better retain sweet whey. These results indicate that HPH has a strong potential for the manufacture of queso fresco with excellent yield and textural properties. Copyright © 2011 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Benefits of seasonal forecasts of crop yields

Science.gov (United States)

Sakurai, G.; Okada, M.; Nishimori, M.; Yokozawa, M.

2017-12-01

Major factors behind recent fluctuations in food prices include increased biofuel production and oil price fluctuations. In addition, several extreme climate events that reduced worldwide food production coincided with upward spikes in food prices. The stabilization of crop yields is one of the most important tasks to stabilize food prices and thereby enhance food security. Recent development of technologies related to crop modeling and seasonal weather forecasting has made it possible to forecast future crop yields for maize and soybean. However, the effective use of these technologies remains limited. Here we present the potential benefits of seasonal crop-yield forecasts on a global scale for choice of planting day. For this purpose, we used a model (PRYSBI-2) that can well replicate past crop yields both for maize and soybean. This model system uses a Bayesian statistical approach to estimate the parameters of a basic process-based model of crop growth. The spatial variability of model parameters was considered by estimating the posterior distribution of the parameters from historical yield data by using the Markov-chain Monte Carlo (MCMC) method with a resolution of 1.125° × 1.125°. The posterior distributions of model parameters were estimated for each spatial grid with 30 000 MCMC steps of 10 chains each. By using this model and the estimated parameter distributions, we were able to estimate not only crop yield but also levels of associated uncertainty. We found that the global average crop yield increased about 30% as the result of the optimal selection of planting day and that the seasonal forecast of crop yield had a large benefit in and near the eastern part of Brazil and India for maize and the northern area of China for soybean. In these countries, the effects of El Niño and Indian Ocean dipole are large. The results highlight the importance of developing a system to forecast global crop yields.

Modelling of the process yields of a whey fermentation

Energy Technology Data Exchange (ETDEWEB)

Blakebrough, N; Moresi, M

1981-09-01

The biomass yields (y) and COD reduction efficiencies (eta) of a whey fermentation by Kluyveromyces fragilis were studied in a 100-l fermenter at various stirrer speeds and lactose concentrations, and compared to those obtained in 10-l and 15-l fermenters at constant values of the oxygen transfer coefficient (ksub(L)a) and air velocity. The empirical models previously constructed by using the 15-l fermenter data could be used to predict the yields on the other scales by calculating for each run the 15-l fermenter which would provide the same oxygen transfer coefficient measured by the sulphite method on each fermenter under study. To make this model independent of stirrer speeds used in each generic fermenter, the effect of aeration and mixing was incorporated into an overall parameter (ksub(L)a) and the values of y and eta were correlated only with temperature, lactose level and ksub(L)a since these variables were approximately orthogonal.

Effects of Texture and Grain Size on the Yield Strength of ZK61 Alloy Rods Processed by Cyclic Extrusion and Compression.

Science.gov (United States)

Zhang, Lixin; Zhang, Wencong; Cao, Biao; Chen, Wenzhen; Duan, Junpeng; Cui, Guorong

2017-10-26

The ZK61 alloy rods with different grain sizes and crystallographic texture were successfully fabricated by cyclic extrusion and compression (CEC). Their room-temperature tension & compression yield strength displayed a significant dependence on grain size and texture, essentially attributed to {10-12} twinning. The texture variations were characterized by the angle θ between the c-axis of the grain and the extrusion direction (ED) during the process. The contour map of room-temperature yield strength as a function of grain size and the angle θ was obtained. It showed that both the tension yield strength and the compression yield strength of ZK61 alloy were fully consistent with the Hall-Patch relationship at a certain texture, but the change trends of the tension yield strength and the compression yield strength were completely opposite at the same grain size while texture altered. The friction stresses of different deformation modes calculated based on the texture confirmed the tension yield strength of the CECed ZK61 alloy rods, which was determined by both the basal slip and the tension twinning slip during the tension deformation at room temperature, while the compression yield strength was mainly determined by the basal slip during the compression deformation.

Study of the Higgs boson discovery potential in the process pp{yields}H/A{yields}{mu}{sup +}{mu}{sup -}/{tau}{sup +}{tau}{sup -} with the ATLAS detector

Energy Technology Data Exchange (ETDEWEB)

Dedes, Georgios

2008-04-22

In this thesis, the discovery potential of the ATLAS experiment at the Large Hadron Collider (LHC) at CERN for the heavy neutral Higgs bosons H/A of theMinimal Supersymmetric extension of the Standard Model of particle physics (MSSM) in the decay channels H/A{yields}{tau}{sup +}{tau}{sup -}{yields}e/{mu}+X and H/A{yields}{mu}{sup +}{mu}{sup -} has been studied. The ATLAS detector is designed to study the full spectrum of the physics phenomena occuring in the proton-proton collisions at 14 TeV center-of-mass energy and to provide answers to the question of the origin of particle masses and of electroweak symmetry breaking. For the studies, the ATLAS muon spectrometer plays an important role. The spectrometer allows for a precise muon momentum measurement independently of other ATLAS subdetectors. The performance of the muon spectrometer depends strongly on the performance of the muon tracking detectors, the Monitored Drift Tube Chambers (MDT). Computer programs have been developed in order to test and verify the ATLAS muon spectrometer simulation, an essential ingredient for data analysis. In addition, dedicated programs for the monitoring of the quality of the data collected by the muon spectrometer have been developed and tested with data from cosmic ray muons. High-quality cosmic ray muon data have been used for the calibration of the MDT-chambers. A new calibration method, called analytical autocalibration, has been tested. The proposed method achieved the required accuracy of 20 {mu}m in the determination of the space-to-drift-time relationship of the drift tubes of the MDT chambers with only 2000 muon tracks per chamber. Reliable muon detector simulation and calibration are essential for the study of the MSSM Higgs boson decays H/A{yields}{tau}{sup +}{tau}{sup -}{yields}e/{mu}+X and H/A{yields}{mu}{sup +}{mu}{sup -} and of the corresponding background processes. The signal selection and background rejection requirements have been optimized for maximum signal

Improving conversion yield of fermentable sugars into fuel ethanol in 1st generation yeast-based production processes.

Science.gov (United States)

Gombert, Andreas K; van Maris, Antonius J A

2015-06-01

Current fuel ethanol production using yeasts and starch or sucrose-based feedstocks is referred to as 1st generation (1G) ethanol production. These processes are characterized by the high contribution of sugar prices to the final production costs, by high production volumes, and by low profit margins. In this context, small improvements in the ethanol yield on sugars have a large impact on process economy. Three types of strategies used to achieve this goal are discussed: engineering free-energy conservation, engineering redox-metabolism, and decreasing sugar losses in the process. Whereas the two former strategies lead to decreased biomass and/or glycerol formation, the latter requires increased process and/or yeast robustness. Copyright © 2014 Elsevier Ltd. All rights reserved.

Round-Bale Silage Harvesting and Processing Effects on Overwintering Ability, Dry Matter Yield, Fermentation Quality, and Palatability of Dwarf Napiergrass (Pennisetum purpureum Schumach

Directory of Open Access Journals (Sweden)

Satoru Fukagawa

2017-02-01

Full Text Available Round-bale silage harvesting and processing methods were assessed to evaluate overwintering ability and dry matter (DM yield, fermentation quality and palatability of overwintered dwarf Napiergrass (Pennisetum purpureum Schumach in the two years following establishment in Nagasaki, Japan, in May 2013 using rooted tillers with a density of 2 plants/m2. In 2014, harvesting methods under no-wilting treatment were compared for flail-type harvesting with a round-baler (Flail/baler plot and mower conditioning with a round-baler (Mower/baler plot, which is common for beef-calf–producing farmers in the region. In 2015, the effect of ensilage with wilting was investigated only in the Mower/baler plot. Dwarf Napiergrass was cut twice, in early August (summer and late November (late autumn, each year. The winter survival rate was greater than 96% in May both years. The DM yield in the Mower/baler plot did not differ significantly for the first summer cutting or the annual total from the Flail/baler plot, but did show inferior yield for the second cutting. The fermentation quality of the second-cut plants, estimated using the V2-score, was higher in the Flail/baler plot than in the Mower/baler plot, possibly because of higher air-tightness, and the second-cut silage tended to have better fermentation quality than the first-cut silage in both harvesting plots. Wilting improved the fermentation quality of dwarf Napiergrass silage in summer, but not in autumn. The palatability of the silage, as estimated by alternative and voluntary intake trials using Japanese Black beef cattle, did not differ significantly between plots. The results suggest that dwarf Napiergrass can be better harvested using a mower conditioner with processing by a round-baler, an approach common to beef-calf–producing farmers, than with the flail/baler system, without reducing the persistence, yield, or palatability of the silage. Moreover, wilting treatment improved the fermentation

Effects of diurnal temperature range and drought on wheat yield in Spain

Science.gov (United States)

Hernandez-Barrera, S.; Rodriguez-Puebla, C.; Challinor, A. J.

2017-07-01

This study aims to provide new insight on the wheat yield historical response to climate processes throughout Spain by using statistical methods. Our data includes observed wheat yield, pseudo-observations E-OBS for the period 1979 to 2014, and outputs of general circulation models in phase 5 of the Coupled Models Inter-comparison Project (CMIP5) for the period 1901 to 2099. In investigating the relationship between climate and wheat variability, we have applied the approach known as the partial least-square regression, which captures the relevant climate drivers accounting for variations in wheat yield. We found that drought occurring in autumn and spring and the diurnal range of temperature experienced during the winter are major processes to characterize the wheat yield variability in Spain. These observable climate processes are used for an empirical model that is utilized in assessing the wheat yield trends in Spain under different climate conditions. To isolate the trend within the wheat time series, we implemented the adaptive approach known as Ensemble Empirical Mode Decomposition. Wheat yields in the twenty-first century are experiencing a downward trend that we claim is a consequence of widespread drought over the Iberian Peninsula and an increase in the diurnal range of temperature. These results are important to inform about the wheat vulnerability in this region to coming changes and to develop adaptation strategies.

[Runoff and sediment yielding processes on red soil engineering accumulation containing gravels by a simulated rainfall experiment].

Science.gov (United States)

Shi, Qian-hua; Wang, Wen-long; Guo, Ming-ming; Bai, Yun; Deng, Li-qiang; Li, Jian-ming; Li, Yao-lin

2015-09-01

Engineering accumulation formed in production and construction projects is characterized by unique structure and complex material composition. Characteristics of soil erosion on the engineering accumulation significantly differ from those on farmland. An artificially simulated rainfall experiment was carried out to investigate the effects of rainfall intensity on the processes of runoff and sediment yielding on the engineering accumulation of different gravel contents (0%, 10%, 20% and 30%) in red soil regions. Results showed that the initial time of runoff generation decreased with increases in rainfall intensity and gravel content, the decreased amplitudes being about 48.5%-77.9% and 4.2%-34.2%, respectively. The initial time was found to be a power function of rainfall intensity. Both runoff velocity and runoff rate manifested a trend of first rising and then in a steady state with runoff duration. Rainfall intensity was found to be the main factor influencing runoff velocity and runoff rate, whereas the influence of gravel content was not significant. About 10% of gravel content was determined to be a critical value in the influence of gravel content on runoff volume. For the underlying surface of 10% gravel content, the runoff volume was least at rainfall intensity of 1.0 mm · min(-1) and maximum at rainfall intensity of greater than 1.0 mm · min(-1). The runoff volume in- creased 10%-60% with increase in rainfall intensity. Sediment concentration showed a sharp decline in first 6 min and then in a stable state in rest of time. Influence of rainfall intensity on sediment concentration decreased as gravel content increased. Gravels could reduce sediment yield significantly at rainfall intensity of greater than 1.0 mm · min(-1). Sediment yield was found to be a linear function of rainfall intensity and gravel content.

Slope Controls Grain Yield and Climatic Yield in Mountainous Yunnan province, China

Science.gov (United States)

Duan, X.; Rong, L.; Gu, Z.; Feng, D.

2017-12-01

Mountainous regions are increasingly vulnerable to food insecurity because of limited arable land, growing population pressure, and climate change. Development of sustainable mountain agriculture will require an increased understanding of the effects of environmental factors on grain and climatic yields. The objective of this study was to explore the relationships between actual grain yield, climatic yield, and environmental factors in a mountainous region in China. We collected data on the average grain yield per unit area in 119 counties in Yunnan province from 1985 to 2012, and chose 17 environmental factors for the same period. Our results showed that actual grain yield ranged from 1.43 to 6.92 t·ha-1, and the climatic yield ranged from -0.15 to -0.01 t·ha-1. Lower climatic yield but higher grain yield was generally found in central areas and at lower slopes and elevations in the western and southwestern counties of Yunnan province. Higher climatic yield but lower grain yield were found in northwestern parts of Yunnan province on steep slopes. Annual precipation and temperature had a weak influence on the climatic yield. Slope explained 44.62 and 26.29% of the variation in grain yield and climatic yield. The effects of topography on grain and climatic yields were greater than climatic factors. Slope was the most important environmental variable for the variability in climatic and grain yields in the mountainous Yunnan province due to the highly heterogeneous topographic conditions. Conversion of slopes to terraces in areas with higher climatic yields is an effective way to maintain grain production in response to climate variability. Additionally, soil amendments and soil and water conservation measures should be considered to maintain soil fertility and aid in sustainable development in central areas, and in counties at lower slopes and elevations in western and southwestern Yunnan province.

Parsing multiple processes of high temperature impacts on corn/soybean yield using a newly developed CLM-APSIM modeling framework

Science.gov (United States)

Peng, B.; Guan, K.; Chen, M.

2016-12-01

Future agricultural production faces a grand challenge of higher temperature under climate change. There are multiple physiological or metabolic processes of how high temperature affects crop yield. Specifically, we consider the following major processes: (1) direct temperature effects on photosynthesis and respiration; (2) speed-up growth rate and the shortening of growing season; (3) heat stress during reproductive stage (flowering and grain-filling); (4) high-temperature induced increase of atmospheric water demands. In this work, we use a newly developed modeling framework (CLM-APSIM) to simulate the corn and soybean growth and explicitly parse the above four processes. By combining the strength of CLM in modeling surface biophysical (e.g., hydrology and energy balance) and biogeochemical (e.g., photosynthesis and carbon-nitrogen interactions), as well as that of APSIM in modeling crop phenology and reproductive stress, the newly developed CLM-APSIM modeling framework enables us to diagnose the impacts of high temperature stress through different processes at various crop phenology stages. Ground measurements from the advanced SoyFACE facility at University of Illinois is used here to calibrate, validate, and improve the CLM-APSIM modeling framework at the site level. We finally use the CLM-APSIM modeling framework to project crop yield for the whole US Corn Belt under different climate scenarios.

Real-time yield estimation based on deep learning

Science.gov (United States)

Rahnemoonfar, Maryam; Sheppard, Clay

2017-05-01

Crop yield estimation is an important task in product management and marketing. Accurate yield prediction helps farmers to make better decision on cultivation practices, plant disease prevention, and the size of harvest labor force. The current practice of yield estimation based on the manual counting of fruits is very time consuming and expensive process and it is not practical for big fields. Robotic systems including Unmanned Aerial Vehicles (UAV) and Unmanned Ground Vehicles (UGV), provide an efficient, cost-effective, flexible, and scalable solution for product management and yield prediction. Recently huge data has been gathered from agricultural field, however efficient analysis of those data is still a challenging task. Computer vision approaches currently face diffident challenges in automatic counting of fruits or flowers including occlusion caused by leaves, branches or other fruits, variance in natural illumination, and scale. In this paper a novel deep convolutional network algorithm was developed to facilitate the accurate yield prediction and automatic counting of fruits and vegetables on the images. Our method is robust to occlusion, shadow, uneven illumination and scale. Experimental results in comparison to the state-of-the art show the effectiveness of our algorithm.

The Effect of Crop Residue and Different NPK Fertilizer Rates on yield Components and Yield of Wheat

Directory of Open Access Journals (Sweden)

fatemeh khamadi

2017-08-01

grain and biological yield resulted from the treated plants with F1 there was no difference among F2 and F1 fertilizer rate for grain yield of wheat. Also cereal straw + legume (GM in CR4 and CR5 treatments in F2 performed better than F1 fertilizer in no residue treatment and Wheat grain yield under F2 × CR5 treatments was 25% greater than under F1 × CR8 treatments. The combined use of NPK fertilizer plays an important role in wheat production. Application of NPK in balanced share at proper time has great impact on wheat yield. In order to achieve higher crop production, balanced and integrated nutrient supply and proper management of soil fertility is essential. Application of crop residues/green manures along with suitable does of major nutrients for efficient growth of crop prevent the decline in organic carbon and also bridge up gap between potential and actual yield of wheat. Further, use of crop residue had favorable effect on physic chemical and biological properties of soil due to supply of macro and micro-nutrients to crop properly. Furthermore the decomposition and mineralization of crop residue is a slow process which could match the nutrient requirement of crop. The protein percentage, which is higher in CR5 and CR4 ,shows in whole crop residue treatments, the lowest valuable in F3 and improves with the increase in fertilization researching the highest value with the rate F1. No significant difference was observed between the rate F2 and F3; this would suggest a lower efficiency of the latter, at least for protein accumulation. Increased wheat yield and component yield due to different crop residue incorporation and NPK rate were reported by Verhulst et al. (2011 and Aulakh et al. (2012. Conclusion Application of (140N- 90P- 80K kg.ha-1 and straw wheat along with mungbean and application straw barley + green manure was more effective than (180N- 120P- 100K kg.ha-1 application in no residue incorporation on grain yield and based on this research findings

Yielding to Stress: Recent Developments in Viscoplastic Fluid Mechanics

Science.gov (United States)

Balmforth, Neil J.; Frigaard, Ian A.; Ovarlez, Guillaume

2014-01-01

The archetypal feature of a viscoplastic fluid is its yield stress: If the material is not sufficiently stressed, it behaves like a solid, but once the yield stress is exceeded, the material flows like a fluid. Such behavior characterizes materials common in industries such as petroleum and chemical processing, cosmetics, and food processing and in geophysical fluid dynamics. The most common idealization of a viscoplastic fluid is the Bingham model, which has been widely used to rationalize experimental data, even though it is a crude oversimplification of true rheological behavior. The popularity of the model is in its apparent simplicity. Despite this, the sudden transition between solid-like behavior and flow introduces significant complications into the dynamics, which, as a result, has resisted much analysis. Over recent decades, theoretical developments, both analytical and computational, have provided a better understanding of the effect of the yield stress. Simultaneously, greater insight into the material behavior of real fluids has been afforded by advances in rheometry. These developments have primed us for a better understanding of the various applications in the natural and engineering sciences.

Systematic data mining using a pattern database to accelerate yield ramp

Science.gov (United States)

Teoh, Edward; Dai, Vito; Capodieci, Luigi; Lai, Ya-Chieh; Gennari, Frank

2014-03-01

Pattern-based approaches to physical verification, such as DRC Plus, which use a library of patterns to identify problematic 2D configurations, have been proven to be effective in capturing the concept of manufacturability where traditional DRC fails. As the industry moves to advanced technology nodes, the manufacturing process window tightens and the number of patterns continues to rapidly increase. This increase in patterns brings about challenges in identifying, organizing, and carrying forward the learning of each pattern from test chip designs to first product and then to multiple product variants. This learning includes results from printability simulation, defect scans and physical failure analysis, which are important for accelerating yield ramp. Using pattern classification technology and a relational database, GLOBALFOUNDRIES has constructed a pattern database (PDB) of more than one million potential yield detractor patterns. In PDB, 2D geometries are clustered based on similarity criteria, such as radius and edge tolerance. Each cluster is assigned a representative pattern and a unique identifier (ID). This ID is then used as a persistent reference for linking together information such as the failure mechanism of the patterns, the process condition where the pattern is likely to fail and the number of occurrences of the pattern in a design. Patterns and their associated information are used to populate DRC Plus pattern matching libraries for design-for-manufacturing (DFM) insertion into the design flow for auto-fixing and physical verification. Patterns are used in a production-ready yield learning methodology to identify and score critical hotspot patterns. Patterns are also used to select sites for process monitoring in the fab. In this paper, we describe the design of PDB, the methodology for identifying and analyzing patterns across multiple design and technology cycles, and the use of PDB to accelerate manufacturing process learning. One such

Effect of sulfur and iron fertilizers on yield, yield components and ...

African Journals Online (AJOL)

Jane

2011-06-13

Jun 13, 2011 ... per plant. Interaction between water stress and combination of iron and sulfur fertilizers had significant .... Results of analysis of variance (ANOVA) of water stress (W), sulfur (B) and iron (C), and their interaction with gain yield, yield components and ... the soil structure and it increased the usefulness of other.

Increase of alcohol yield per ton of pulp

Energy Technology Data Exchange (ETDEWEB)

Sokolov, B N

1957-01-01

Digestion processes of cellulose were studied under production conditions. When the digestion was carried out with acid having 5.2% total SO/sub 2/ and 0.92% CaO, the concentration of total sugars in the spent liquor was 1.8 to 2.5%. When the acidity was reduced to 4.8% total SO/sub 2/ and 0.82% CaO, all other conditions being the same, the sugar concentration in the spent liquor increased to 3.0 to 3.7%. The importance of the acid strength and CaO content of the cooking liquor was further demonstrated at the end of 1955. At that time the total SO/sub 2/ in the acid rose to 8% while the amount of CaO remained practically the same-0.85 to 0.90%. These conditions permitted an increase in the amount of ships by 25 to 30%, which further changed the ratio CaO: wood and created conditions favorable for an improved yield of sugar. The increase in the activity of the acid was reflected favorably in the degree of hydrolysis of the hemicelluloses and in the degree to which the oligosaccharides or polysaccharides were hydrolyzed to simple sugars. At that time the yield of alcohol reached 53 1/ton of unbleached pulp. The process was further improved in 1956 by the use of successive washings; at the end of the digestion period the concentrated spent liquor was piped to the alcohol unit. The yield of alcohol reached 59.4 1/ton of pulp. Sugar recovery from the tank was 92.5% of that theoretically possible. Further improvements resulted by saturating the wood chips with acid under variable pressures. As a result, the base of the cooking acid was reduced to 0.7 to 0.72% and, at the end of the process the liquor contained 0.03 to 0.06% CaO instead of 0.2 to 0.18%. The alcohol yield/ton of pulp then rose to 66.8 l.

Research Results of Bioenergetics Factors Influence on Crop Production Yields Increase

Directory of Open Access Journals (Sweden)

A. P. Grishin

2018-01-01

Full Text Available The results of a fundamental research is presented confirming two hypotheses concerning the process of a crop harvest forming and transpiration as the two main bio-energetic factors of fertility. Transpiration is a thermodynamic process in an open self-organizing system, which has a dissipative random character. Transpiration consumes about 95 percent of the water consumed by the plant. (Purpose of research The research objective is to obtain results confirming two hypotheses, according to which the efficiency of the process of crop formation is due to transpiration as a bio-energy factor of fertility and its components: photosynthetic exergy and thermal exergy. (Methods and materials The basic principles of thermodynamic systems self-organization, as well as methods of experimental studies of the principle of subordination to the parameter of the order in which the system control variable is dependent on parameter of the order. The relation of the order parameter (thermal exergy of solar radiation (SR and the variable control (transpiration was determined. The values of the correlation coefficients of these two processes have a value close to one. This confirms that transpiration is a dissipative self-organizing process underlying the transpiration irrigation mechanism. It is revealed that a fractal dimension of a time series of transpiration of cucumber with natural light, a potato is artificial, and their probability haracteristics: the mathematical expectation, standard deviation and variance. (Results and discussion We received confirmation of the scientific hypothesis about the influence of limiting climatic factors on the theoretical limit of plant productivity and fractal dimension of transpiration as an indicator of production processes in crop production. (Conclusions We put forward supplemental scientific hypothesis about the influence of limiting climatic factors on the theoretical limit of plant productivity. It was showed that

Biogas yield from Sicilian kitchen waste and cheese whey

Directory of Open Access Journals (Sweden)

Antonio Comparetti

2013-09-01

Full Text Available The aim of this study is to determine the chemical composition of kitchen waste and cheese whey, as well as the biogas yield obtained from the Anaerobic Digestion (AD tests of these two raw materials. Since the separated waste collection is performed in the town of Marineo (Palermo, a sample of kitchen waste, different from food industry one and included in the Organic Fraction of Municipal Solid Waste (OFMSW, was collected from the mass stored at the households of this town. Moreover, a sample of cheese whey was collected in a Sicilian mini dairy plant, where sheep milk is processed. This investigation was carried out inside laboratory digesters of Aleksandras Stulginskis University (Lithuania. Total Solids (TS resulted 15.6% in kitchen waste and 6% in cheese whey, while both the raw materials showed a high content of organic matter, 91.1% and 79.1%, respectively. The biogas yield resulted 104.6 l kg–1 from kitchen waste and 30.6 l kg–1 from cheese whey. The biogas yield from TS resulted 672.6 l kg–1 using kitchen waste and 384.7 l kg–1 using cheese whey. The biogas yield from Volatile Solids (VS resulted 738.9 l kg–1 using kitchen waste and 410.3 l kg–1 using cheese whey.

The effects of the regulated deficit irrigation on yield and some yield ...

African Journals Online (AJOL)

user

2011-05-16

May 16, 2011 ... human diet and environment, its production requires a significant amount of water due to its relatively shallow root system. Thus, the amount of ... should be applied. Drip irrigation, reduces deep percolation and evaporation ..... processing tomato yield, water table depth, soil salinity and profitability. Agric.

Microeconomics of yield learning and process control in semiconductor manufacturing

Science.gov (United States)

Monahan, Kevin M.

2003-06-01

Simple microeconomic models that directly link yield learning to profitability in semiconductor manufacturing have been rare or non-existent. In this work, we review such a model and provide links to inspection capability and cost. Using a small number of input parameters, we explain current yield management practices in 200mm factories. The model is then used to extrapolate requirements for 300mm factories, including the impact of technology transitions to 130nm design rules and below. We show that the dramatic increase in value per wafer at the 300mm transition becomes a driver for increasing metrology and inspection capability and sampling. These analyses correlate well wtih actual factory data and often identify millions of dollars in potential cost savings. We demonstrate this using the example of grating-based overlay metrology for the 65nm node.

An analytical model of nonproportional scintillator light yield in terms of recombination rates

International Nuclear Information System (INIS)

Bizarri, G.; Moses, W. W.; Singh, J.; Vasil'ev, A. N.; Williams, R. T.

2009-01-01

Analytical expressions for the local light yield as a function of the local deposited energy (-dE/dx) and total scintillation yield integrated over the track of an electron of initial energy E are derived from radiative and/or nonradiative rates of first through third order in density of electronic excitations. The model is formulated in terms of rate constants, some of which can be determined independently from time-resolved spectroscopy and others estimated from measured light yield efficiency as a constraint assumed to apply in each kinetic order. The rates and parameters are used in the theory to calculate scintillation yield versus primary electron energy for comparison to published experimental results on four scintillators. Influence of the track radius on the yield is also discussed. Results are found to be qualitatively consistent with the observed scintillation light yield. The theory can be applied to any scintillator if the rates of the radiative and nonradiative processes are known

Comparison of the methods for determination of scintillation light yield

CERN Document Server

Sysoeva, E; Zelenskaya, O

2002-01-01

One of the most important characteristics of scintillators is the light yield. It depends not only on the properties of scintillators, but also on the conditions of measurements. Even for widely used crystals, such as alkali halide scintillators NaI(Tl) and CsI(Tl), light yield data, obtained by various authors, are different. Therefore, it is very important to choose the convenient method of the light yield measurements. In the present work, methods for the determination of the physical light yield, based on measurements of pulse amplitude, single-electron pulses and intrinsic photomultiplier resolution are discussed. These methods have been used for the measurements of light yield of alkali halide crystals and oxide scintillators. Repeatability and reproducibility of results were determined. All these methods are rather complicated in use, not for measurements, but for further data processing. Besides that, they demand a precise determination of photoreceiver's parameters, as well as determination of light ...

Development of estimation method for crop yield using MODIS satellite imagery data and process-based model for corn and soybean in US Corn-Belt region

Science.gov (United States)

Lee, J.; Kang, S.; Jang, K.; Ko, J.; Hong, S.

2012-12-01

Crop productivity is associated with the food security and hence, several models have been developed to estimate crop yield by combining remote sensing data with carbon cycle processes. In present study, we attempted to estimate crop GPP and NPP using algorithm based on the LUE model and a simplified respiration model. The state of Iowa and Illinois was chosen as the study site for estimating the crop yield for a period covering the 5 years (2006-2010), as it is the main Corn-Belt area in US. Present study focuses on developing crop-specific parameters for corn and soybean to estimate crop productivity and yield mapping using satellite remote sensing data. We utilized a 10 km spatial resolution daily meteorological data from WRF to provide cloudy-day meteorological variables but in clear-say days, MODIS-based meteorological data were utilized to estimate daily GPP, NPP, and biomass. County-level statistics on yield, area harvested, and productions were used to test model predicted crop yield. The estimated input meteorological variables from MODIS and WRF showed with good agreements with the ground observations from 6 Ameriflux tower sites in 2006. For examples, correlation coefficients ranged from 0.93 to 0.98 for Tmin and Tavg ; from 0.68 to 0.85 for daytime mean VPD; from 0.85 to 0.96 for daily shortwave radiation, respectively. We developed county-specific crop conversion coefficient, i.e. ratio of yield to biomass on 260 DOY and then, validated the estimated county-level crop yield with the statistical yield data. The estimated corn and soybean yields at the county level ranged from 671 gm-2 y-1 to 1393 gm-2 y-1 and from 213 gm-2 y-1 to 421 gm-2 y-1, respectively. The county-specific yield estimation mostly showed errors less than 10%. Furthermore, we estimated crop yields at the state level which were validated against the statistics data and showed errors less than 1%. Further analysis for crop conversion coefficient was conducted for 200 DOY and 280 DOY

An Analytically Tractable Model for Pricing Multiasset Options with Correlated Jump-Diffusion Equity Processes and a Two-Factor Stochastic Yield Curve

Directory of Open Access Journals (Sweden)

Tristan Guillaume

2016-01-01

Full Text Available This paper shows how to value multiasset options analytically in a modeling framework that combines both continuous and discontinuous variations in the underlying equity or foreign exchange processes and a stochastic, two-factor yield curve. All correlations are taken into account, between the factors driving the yield curve, between fixed income and equity as asset classes, and between the individual equity assets themselves. The valuation method is applied to three of the most popular two-asset options.

A high yield process for hydrate formation

Energy Technology Data Exchange (ETDEWEB)

Giavarini, C.; Maccioni, F. [Univ. of Roma La Sapienza, Roma (Italy). Dept. of Chemical Engineering

2008-07-01

Due to the large quantities of natural gas stored in deep ocean hydrates, hydrate reservoirs are a substantial energy resource. Hydrates concentrate methane by as much as a factor of 164. As such, several natural gas transportation and storage systems using gas hydrates have been studied, and many of them are nearing practical use. In these systems, the hydrate is produced as a slurry by a spray process at approximately 7 megapascal (MPa), and then shaped into pellets. The use of a spray process, instead of a conventional stirred vessel is necessary in order to reach high hydrate concentrations in the hydrate-ice system. This paper presented a new procedure to produce a bulk of concentrated methane hydrate in a static traditional reactor at moderate pressure, controlling pressure and temperature in the interval between ice melting and the hydrate equilibrium curve. This paper discussed the experimental procedure which included formation of methane hydrate at approximately 5 MPa and 2 degrees Celsius in a reaction calorimeter at a volume of two liters. Results were also discussed. It was concluded that the procedure seemed suitable for the development of a gas hydrate storage and transport technology. It was found that the spray procedure took more time, but could be sped up and made continuous by using two vessels, one for hydrate formation and the other for hydrate concentration. The advantage was the production of a concentrated hydrate, using a simpler equipment and working at lower pressures respect to the spray process. 9 refs., 5 figs.

Potential Dimension Yields From Direct Processing

Science.gov (United States)

Wenjie Lin; D. Earl Kline; Philip A. Araman

1994-01-01

As the price of timber increases and environmental leigslation limits harvestable log volumes, the process of converting logs directly into dimension parts needs further exploration. Direct processing converts logs directly into rough green dimension parts without the intermediate steps of lumber manufacturing, grading, trading, shipping and drying. A major attraction...

Effect of carrageenan addition on the yield and functional properties of charqui (Jerked Beef

Directory of Open Access Journals (Sweden)

Carlos Eduardo Rocha Garcia

2013-04-01

Full Text Available The objective of this work was to evaluate the application of carrageenan (CAR to improve the functional properties of the jerked beef (JF and to increase its processing yield. JB produced from Vastus lateralis with CAR (1.0% at 25ºC and NaCl (15.0% had approximately 15.0% higher moisture and a 32.0% higher processing yield in comparison to the control samples.JB-CAR presented shear force approximately 5.0 and 20% lower in the samples uncooked salted and desalted cooked, respectively, and sensorial acceptance above 80%. The results demonstrated the possibility of applying carrageenan to jerked beef in order to obtain an increase in the processing yield and a tender product while maintaining the sensorial quality and its intermediate-moisture meat product nature.

Fission yield calculation using toy model based on Monte Carlo simulation

International Nuclear Information System (INIS)

Jubaidah; Kurniadi, Rizal

2015-01-01

Toy model is a new approximation in predicting fission yield distribution. Toy model assumes nucleus as an elastic toy consist of marbles. The number of marbles represents the number of nucleons, A. This toy nucleus is able to imitate the real nucleus properties. In this research, the toy nucleons are only influenced by central force. A heavy toy nucleus induced by a toy nucleon will be split into two fragments. These two fission fragments are called fission yield. In this research, energy entanglement is neglected. Fission process in toy model is illustrated by two Gaussian curves intersecting each other. There are five Gaussian parameters used in this research. They are scission point of the two curves (R c ), mean of left curve (μ L ) and mean of right curve (μ R ), deviation of left curve (σ L ) and deviation of right curve (σ R ). The fission yields distribution is analyses based on Monte Carlo simulation. The result shows that variation in σ or µ can significanly move the average frequency of asymmetry fission yields. This also varies the range of fission yields distribution probability. In addition, variation in iteration coefficient only change the frequency of fission yields. Monte Carlo simulation for fission yield calculation using toy model successfully indicates the same tendency with experiment results, where average of light fission yield is in the range of 90yield is in about 135

Fission yield calculation using toy model based on Monte Carlo simulation

Energy Technology Data Exchange (ETDEWEB)

Jubaidah, E-mail: jubaidah@student.itb.ac.id [Nuclear Physics and Biophysics Division, Department of Physics, Bandung Institute of Technology. Jl. Ganesa No. 10 Bandung – West Java, Indonesia 40132 (Indonesia); Physics Department, Faculty of Mathematics and Natural Science – State University of Medan. Jl. Willem Iskandar Pasar V Medan Estate – North Sumatera, Indonesia 20221 (Indonesia); Kurniadi, Rizal, E-mail: rijalk@fi.itb.ac.id [Nuclear Physics and Biophysics Division, Department of Physics, Bandung Institute of Technology. Jl. Ganesa No. 10 Bandung – West Java, Indonesia 40132 (Indonesia)

2015-09-30

Toy model is a new approximation in predicting fission yield distribution. Toy model assumes nucleus as an elastic toy consist of marbles. The number of marbles represents the number of nucleons, A. This toy nucleus is able to imitate the real nucleus properties. In this research, the toy nucleons are only influenced by central force. A heavy toy nucleus induced by a toy nucleon will be split into two fragments. These two fission fragments are called fission yield. In this research, energy entanglement is neglected. Fission process in toy model is illustrated by two Gaussian curves intersecting each other. There are five Gaussian parameters used in this research. They are scission point of the two curves (R{sub c}), mean of left curve (μ{sub L}) and mean of right curve (μ{sub R}), deviation of left curve (σ{sub L}) and deviation of right curve (σ{sub R}). The fission yields distribution is analyses based on Monte Carlo simulation. The result shows that variation in σ or µ can significanly move the average frequency of asymmetry fission yields. This also varies the range of fission yields distribution probability. In addition, variation in iteration coefficient only change the frequency of fission yields. Monte Carlo simulation for fission yield calculation using toy model successfully indicates the same tendency with experiment results, where average of light fission yield is in the range of 90yield is in about 135

Retail yield and fabrication times for veal as influenced by purchasing options and merchandising styles.

Science.gov (United States)

McNeill, M S; Griffin, D B; Dockerty, T R; Walter, J P; Johnson, H K; Savell, J W

1998-06-01

Twenty-nine selected styles of subprimals or sections of veal were obtained from a commercial facility to assist in the development of a support program for retailers. They were fabricated into bone-in or boneless retail cuts and associated components by trained meat cutters. Each style selected (n = 6) was used to generate mean retail yields and labor requirements, which were calculated from wholesale and retail weights and processing times. Means and standard errors for veal ribs consisting of five different styles (n = 30) concluded that style #2, 7-rib 4 (10 cm) x 4 (10 cm), had the lowest percentage of total retail yield (P < .05) owing to the greatest percentage of bone. Furthermore, rib style #2 required the longest total processing time (P < .05). Rib styles #3, 7-rib chop-ready, and #5, 6-rib chop ready, yielded the greatest percentage of total retail yield and also had the shortest total processing time (P < .05). Within veal loins, style #2, 4 (10 cm) x 4 (10 cm) loin kidney fat in, had the greatest percentage fat (P < .05). Loin styles #2 and #3, 4 (10 cm) x 4 (10 cm) loin special trimmed, generated more lean and fat trimmings and bone, resulting in lower percentage of total retail yields than loin style #1, 0 (0 cm) x 1 (2.5 cm) loin special trimmed (P < .05). Results indicated that bone-in subprimals and sections required more processing time if fabricated into a boneless end point. In addition, as the number of different retail cuts increased, processing times also increased.

Effects of physical agitation on yield of greenhouse-grown soybean

Science.gov (United States)

Jones, R. S.; Mitchell, C. A.

1992-01-01

Agronomic and horticultural crop species experience reductions in growth and harvestable yield after exposure to physical agitation (also known as mechanical stress), as by wind or rain. A greenhouse study was conducted to test the influence of mechanical stress on soybean yield and to determine if exposure to mechanical stress during discrete growth periods has differential effects on seed yield. A modified rotatory shaker was used to apply seismic (i.e., shaking) stress. Brief, periodic episodes of seismic stress reduced stem length, total seed dry weight, and seed number of soybean [Glycine max (L.) Merr.]. Lodging resistance was greater for plants stressed during vegetative growth or throughout vegetative and reproductive growth than during reproductive growth only. Seed dry weight yield was reduced regardless of the timing or duration of stress application, but was lowest when applied during reproductive development. Seismic stress applied during reproductive growth stages R1 to R2 (Days 3 to 4) was as detrimental to seed dry weight accumulation as was stress applied during growth stages R1 to R6 (Days 39 to 42). Seed dry weight per plant was highly correlated with seed number per plant, and seed number was correlated with the seed number of two- and three-seeded pods. Dry weight per 100 seeds was unaffected by seismic-stress treatment. Growth and yield reductions resulting from treatments applied only during the vegetative stage imply that long-term mechanical effects were induced, from which the plants did not fully recover. It is unclear which yield-controlling physiological processes were affected by mechanical stress. Both transient and long-term effects on yield-controlling processes remain to be elucidated.

Modelling crop yield in Iberia under drought conditions

Science.gov (United States)

Ribeiro, Andreia; Páscoa, Patrícia; Russo, Ana; Gouveia, Célia

2017-04-01

The improved assessment of the cereal yield and crop loss under drought conditions are essential to meet the increasing economy demands. The growing frequency and severity of the extreme drought conditions in the Iberian Peninsula (IP) has been likely responsible for negative impacts on agriculture, namely on crop yield losses. Therefore, a continuous monitoring of vegetation activity and a reliable estimation of drought impacts is crucial to contribute for the agricultural drought management and development of suitable information tools. This works aims to assess the influence of drought conditions in agricultural yields over the IP, considering cereal yields from mainly rainfed agriculture for the provinces with higher productivity. The main target is to develop a strategy to model drought risk on agriculture for wheat yield at a province level. In order to achieve this goal a combined assessment was made using a drought indicator (Standardized Precipitation Evapotranspiration Index, SPEI) to evaluate drought conditions together with a widely used vegetation index (Normalized Difference Vegetation Index, NDVI) to monitor vegetation activity. A correlation analysis between detrended wheat yield and SPEI was performed in order to assess the vegetation response to each time scale of drought occurrence and also identify the moment of the vegetative cycle when the crop yields are more vulnerable to drought conditions. The time scales and months of SPEI, together with the months of NDVI, better related with wheat yield were chosen to perform a multivariate regression analysis to simulate crop yield. Model results are satisfactory and highlighted the usefulness of such analysis in the framework of developing a drought risk model for crop yields. In terms of an operational point of view, the results aim to contribute to an improved understanding of crop yield management under dry conditions, particularly adding substantial information on the advantages of combining

Predicting oil and gas compositional yields via chemical structure-chemical yield modeling (CS-CYM): Part 1 - Concepts and implementation

Energy Technology Data Exchange (ETDEWEB)

Freund, H.; Walters, C.C.; Kelemen, S.R.; Siskin, M.; Gorbaty, M.L.; Curry, D.J.; Bence, A.E. [ExxonMobil Research & Engineering Co., Annandale, NJ (United States)

2007-07-01

We have developed a method to calculate the amounts and composition of products resulting from the thermal decomposition of a solid complex carbonaceous material. This procedure provides a means of using laboratory measurements of complex carbonaceous solids to construct a representative model of its chemical structure (CS) that is then coupled with elementary reaction pathways to predict the chemical yield (CY) upon thermal decomposition. Data from elemental analysis, H, N, O, S, solid state {sup 13}C NMR, X-ray photoelectron spectroscopy (XPS), sulfur X-ray absorption structure spectroscopy (XANES), and pyrolysis-gas chromatography (GC) are used to constrain the construction of core molecular structures representative of the complex carbonaceous material. These core structures are expanded stochastically to describe large macromolecules ({gt} 10{sup 6} cores with similar to 10{sup 6} atoms) with bulk properties that match the experimental results. Gas, liquid and solid product yields, resulting from thermal decomposition, are calculated by identifying reactive functional groups within the CS stochastic ensemble and imposing a reaction network constrained by fundamental thermodynamics and kinetics. An expulsion model is added to the decomposition model to calculate the chemical products in open and closed systems. Product yields may then be predicted under a wide range of time-temperature conditions used in rapid laboratory pyrolysis experiments, refinery processes, or geologic maturation.

Strong morphological and crystallographic texture and resulting yield strength anisotropy in selective laser melted tantalum

International Nuclear Information System (INIS)

Thijs, Lore; Montero Sistiaga, Maria Luz; Wauthle, Ruben; Xie, Qingge; Kruth, Jean-Pierre; Van Humbeeck, Jan

2013-01-01

Selective laser melting (SLM) makes use of a high energy density laser beam to melt successive layers of metallic powders in order to create functional parts. The energy density of the laser is high enough to melt refractory metals like Ta and produce mechanically sound parts. Furthermore, the localized heat input causes a strong directional cooling and solidification. Epitaxial growth due to partial remelting of the previous layer, competitive growth mechanism and a specific global direction of heat flow during SLM of Ta result in the formation of long columnar grains with a 〈1 1 1〉 preferential crystal orientation along the building direction. The microstructure was visualized using both optical and scanning electron microscopy equipped with electron backscattered diffraction and the global crystallographic texture was measured using X-ray diffraction. The thermal profile around the melt pool was modeled using a pragmatic model for SLM. Furthermore, rotation of the scanning direction between different layers was seen to promote the competitive growth. As a result, the texture strength increased to as large as 4.7 for rotating the scanning direction 90° every layer. By comparison of the yield strength measured by compression tests in different orientations and the averaged Taylor factor calculated using the viscoplastic self-consistent model, it was found that both the morphological and crystallographic texture observed in SLM Ta contribute to yield strength anisotropy

Factors affecting the optimal performance of a high-yield pulping operation

Energy Technology Data Exchange (ETDEWEB)

Broderick, G [Noranda Technology Centre, Pointe-Claire, PQ (Canada); Paris, J [Ecole Polytechnique, Montreal, PQ (Canada); Valada, J L [Quebec Univ., Trois-Rivieres, PQ (Canada)

1995-06-01

Strategies for operating a chemical-mechanical pulp mill were investigated from data based on process models from some one hundred pilot scale pulping runs. Optimal values for 55 process and pulp quality variables have been calculated by applying a genetic algorithm search to a fuzzy model of the overall system. Best pulp quality was achieved and maintained when the chemical pretreatment was conducted at moderately low temperatures using a high SO{sub 2} concentration, which produced high sulphonation and high yield at the same time. By characterizing the quality of the pulp at the fibre level, optimization results were said to be more easily transferable to other high yield pulping systems. 19 refs., 6 tabs.

Yield Stress Reduction of DWPF Melter Feed Slurries

International Nuclear Information System (INIS)

Stone, M.E.; Smith, M.E.

2007-01-01

The Defense Waste Processing Facility (DWPF) at the Savannah River Site vitrifies High Level Waste for repository internment. The process consists of three major steps: waste pretreatment, vitrification, and canister decontamination/sealing. The HLW consists of insoluble metal hydroxides and soluble sodium salts. The pretreatment process acidifies the sludge with nitric and formic acids, adds the glass formers as glass frit, then concentrates the resulting slurry to approximately 50 weight percent (wt%) total solids. This slurry is fed to the joule-heated melter where the remaining water is evaporated followed by calcination of the solids and conversion to glass. The Savannah River National Laboratory (SRNL) is currently assisting DWPF efforts to increase throughput of the melter. As part of this effort, SRNL has investigated methods to increase the solids content of the melter feed to reduce the heat load required to complete the evaporation of water and allow more of the energy available to calcine and vitrify the waste. The process equipment in the facility is fixed and cannot process materials with high yield stresses, therefore increasing the solids content will require that the yield stress of the melter feed slurries be reduced. Changing the glass former added during pretreatment from an irregularly shaped glass frit to nearly spherical beads was evaluated. The evaluation required a systems approach which included evaluations of the effectiveness of beads in reducing the melter feed yield stress as well as evaluations of the processing impacts of changing the frit morphology. Processing impacts of beads include changing the settling rate of the glass former (which effects mixing and sampling of the melter feed slurry and the frit addition equipment) as well as impacts on the melt behavior due to decreased surface area of the beads versus frit. Beads were produced from the DWPF process frit by fire polishing. The frit was allowed to free fall through a flame

High-yield secretion of recombinant proteins expressed in tobacco cell culture with a designer glycopeptide tag: Process development.

Science.gov (United States)

Zhang, Ningning; Gonzalez, Maria; Savary, Brett; Xu, Jianfeng

2016-03-01

Low-yield protein production remains the most significant economic hurdle with plant cell culture technology. Fusions of recombinant proteins with hydroxyproline-O-glycosylated designer glycopeptide tags have consistently boosted secreted protein yields. This prompted us to study the process development of this technology aiming to achieve productivity levels necessary for commercial viability. We used a tobacco BY-2 cell culture expressing EGFP as fusion with a glycopeptide tag comprised of 32 repeat of "Ser-Pro" dipeptide, or (SP)32 , to study cell growth and protein secretion, culture scale-up, and establishment of perfusion cultures for continuous production. The BY-2 cells accumulated low levels of cell biomass (~7.5 g DW/L) in Schenk & Hildebrandt medium, but secreted high yields of (SP)32 -tagged EGFP (125 mg/L). Protein productivity of the cell culture has been stable for 6.0 years. The BY-2 cells cultured in a 5-L bioreactor similarly produced high secreted protein yield at 131 mg/L. Successful operation of a cell perfusion culture for 30 days was achieved under the perfusion rate of 0.25 and 0.5 day(-1) , generating a protein volumetric productivity of 17.6 and 28.9 mg/day/L, respectively. This research demonstrates the great potential of the designer glycopeptide technology for use in commercial production of valuable proteins with plant cell cultures. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Automatic extraction of process categories from process model collections

NARCIS (Netherlands)

Malinova, M.; Dijkman, R.M.; Mendling, J.; Lohmann, N.; Song, M.; Wohed, P.

2014-01-01

Many organizations build up their business process management activities in an incremental way. As a result, there is no overarching structure defined at the beginning. However, as business process modeling initiatives often yield hundreds to thousands of process models, there is a growing need for

Effects of nitrogen application method and weed control on corn yield and yield components.

Science.gov (United States)

Sepahvand, Pariya; Sajedi, Nurali; Mousavi, Seyed Karim; Ghiasvand, Mohsen

2014-04-01

The effects of nitrogen fertilizer application and different methods for weed control on yield and yield components of corn was evaluated in Khorramabad in 2011. The experiment was conducted as a split plot based on randomized complete block design in 3 replications. Nitrogen application was as main plot in 4 levels (no nitrogen, broadcasting nitrogen, banding nitrogen and sprayed nitrogen) and methods of weed control were in 4 levels (non-control weeds, application Equip herbicide, once hand control of weeds and application Equip herbicide+once time weeding) was as subplots. Result illustrated that effects of nitrogen fertilizer application were significant on grain and forage yield, 100 seeds weight, harvest index, grain number per row and cob weight per plant. Grain yield increased by 91.4 and 3.9% in application banding and broadcasting for nitrogen fertilizer, respectively, compared to the no fertilizer treatment. The results show improved efficiency of nitrogen utilization by banding application. Grain yield, harvest index, seed rows per cob, seeds per row and cob weight were increased by weed control. In the application of Equip herbicide+ hand weeding treatment corn grain yield was increased 126% in comparison to weedy control. It represents of the intense affects of weed competition with corn. The highest corn grain yield (6758 kg h(-1)) was related to the application banding of nitrogen fertilizer and Equip herbicide+once hand weeding.

Brazilian Soybean Yields and Yield Gaps Vary with Farm Size

Science.gov (United States)

Jeffries, G. R.; Cohn, A.; Griffin, T. S.; Bragança, A.

2017-12-01

Understanding the farm size-specific characteristics of crop yields and yield gaps may help to improve yields by enabling better targeting of technical assistance and agricultural development programs. Linking remote sensing-based yield estimates with property boundaries provides a novel view of the relationship between farm size and yield structure (yield magnitude, gaps, and stability over time). A growing literature documents variations in yield gaps, but largely ignores the role of farm size as a factor shaping yield structure. Research on the inverse farm size-productivity relationship (IR) theory - that small farms are more productive than large ones all else equal - has documented that yield magnitude may vary by farm size, but has not considered other yield structure characteristics. We examined farm size - yield structure relationships for soybeans in Brazil for years 2001-2015. Using out-of-sample soybean yield predictions from a statistical model, we documented 1) gaps between the 95th percentile of attained yields and mean yields within counties and individual fields, and 2) yield stability defined as the standard deviation of time-detrended yields at given locations. We found a direct relationship between soy yields and farm size at the national level, while the strength and the sign of the relationship varied by region. Soybean yield gaps were found to be inversely related to farm size metrics, even when yields were only compared to farms of similar size. The relationship between farm size and yield stability was nonlinear, with mid-sized farms having the most stable yields. The work suggests that farm size is an important factor in understanding yield structure and that opportunities for improving soy yields in Brazil are greatest among smaller farms.

Effect of the Yield Stress and r-value Distribution on the Earing Profile of Cup Drawing with Yld2000-2d Yield Function

Science.gov (United States)

Lou, Yanshan; Bae, Gihyun; Lee, Changsoo; Huh, Hoon

2010-06-01

This paper deals with the effect of the yield stress and r-value distribution on the earing in the cup drawing. The anisotropic yield function, Yld2000-2d yield function, is selected to describe the anisotropy of two metal sheets, 719B and AA5182-O. The tool dimension is referred from the Benchmark problem of NUMISHEET'2002. The Downhill Simplex method is applied to identify the anisotropic coefficients in Yld2000-2d yield function. Simulations of the drawing process are performed to investigate the earing profile of two materials. The earing profiles obtained from simulations are compared with the analytical model developed by Hosford and Caddell. Simulations are conducted with respect to the change of the yield stress and r-value distribution, respectively. The correlation between the anisotropy and the earing tendency is investigated based on simulation data. Finally, the earing mechanism is analyzed through the deformation process of the blank during the cup deep drawing. It can be concluded that ears locate at angular positions with lower yield stress and higher r-value while the valleys appear at the angular position with higher yield stress and lower r-value. The effect of the yield stress distribution is more important for the cup height distribution than that of the r-value distribution.

Using Simulation to Increase Yields in Chemical Engineering

Directory of Open Access Journals (Sweden)

William C. Conley

2003-06-01

Full Text Available Trying to increase the yields or profit or efficiency (less pollution of chemical processes is a central goal of the chemical engineer in theory and practice. Certainly sound training in chemistry, business and pollution control help the engineer to set up optimal chemical processes. However, the ever changing demands of customers and business conditions, plus the multivariate complexity of the chemical business can make optimization challenging. Mathematical tools such as statistics and linear programming have certainly been useful to chemical engineers in their pursuit of optimal efficiency. However, some processes can be modeled linearly and some can not. Therefore, presented here will be an industrial chemical process with potentially five variables affecting the yield. Data from over one hundred runs of the process has been collected, but it is not known initially whether the yield relationship is linear or nonlinear. Therefore, the CTSP multivariate correlation coefficient will be calculated for the data to see if a relationship exists among the variables. Then once it is proven that there is a statistically significant relationship, an appropriate linear or nonlinear equation can be fitted to the data, and it can be optimized for use in the chemical plant.

The metabolic costs of improving ethanol yield by reducing glycerol formation capacity under anaerobic conditions in Saccharomyces cerevisiae.

Science.gov (United States)

Pagliardini, Julien; Hubmann, Georg; Alfenore, Sandrine; Nevoigt, Elke; Bideaux, Carine; Guillouet, Stephane E

2013-03-28

Finely regulating the carbon flux through the glycerol pathway by regulating the expression of the rate controlling enzyme, glycerol-3-phosphate dehydrogenase (GPDH), has been a promising approach to redirect carbon from glycerol to ethanol and thereby increasing the ethanol yield in ethanol production. Here, strains engineered in the promoter of GPD1 and deleted in GPD2 were used to investigate the possibility of reducing glycerol production of Saccharomyces cerevisiae without jeopardising its ability to cope with process stress during ethanol production. For this purpose, the mutant strains TEFmut7 and TEFmut2 with different GPD1 residual expression were studied in Very High Ethanol Performance (VHEP) fed-batch process under anaerobic conditions. Both strains showed a drastic reduction of the glycerol yield by 44 and 61% while the ethanol yield improved by 2 and 7% respectively. TEFmut2 strain showing the highest ethanol yield was accompanied by a 28% reduction of the biomass yield. The modulation of the glycerol formation led to profound redox and energetic changes resulting in a reduction of the ATP yield (YATP) and a modulation of the production of organic acids (acetate, pyruvate and succinate). Those metabolic rearrangements resulted in a loss of ethanol and stress tolerance of the mutants, contrarily to what was previously observed under aerobiosis. This work demonstrates the potential of fine-tuned pathway engineering, particularly when a compromise has to be found between high product yield on one hand and acceptable growth, productivity and stress resistance on the other hand. Previous study showed that, contrarily to anaerobiosis, the resulting gain in ethanol yield was accompanied with no loss of ethanol tolerance under aerobiosis. Moreover those mutants were still able to produce up to 90 gl-1 ethanol in an anaerobic SSF process. Fine tuning metabolic strategy may then open encouraging possibilities for further developing robust strains with improved

Results of the Abbott RealTime HIV-1 assay for specimens yielding "target not detected" results by the Cobas AmpliPrep/Cobas TaqMan HIV-1 Test.

Science.gov (United States)

Babady, N Esther; Germer, Jeffrey J; Yao, Joseph D C

2010-03-01

No significantly discordant results were observed between the Abbott RealTime HIV-1 assay and the COBAS AmpliPrep/COBAS TaqMan HIV-1 Test (CTM) among 1,190 unique clinical plasma specimens obtained from laboratories located in 40 states representing all nine U.S. geographic regions and previously yielding "target not detected" results by CTM.

Independent isomer yield ratio of 90Rb

International Nuclear Information System (INIS)

Reeder, P.L.; Warner, R.A.; Ford, G.P.; Willmes, H.

1985-05-01

The independent isomer yield ratio for 90 Rb from thermal neutron fission of 235 U has been measured by use of a new technique involving a pulsed reactor and an on-line mass spectrometer facility. The apparent isomer yield ratio was measured for different ion collection time intervals and extrapolated to zero collection time to eliminate interference from 90 Kr decay. The observed isomer yield ratio of 8.7 +- 1.0 is one of the largest ratios measured for a low energy fission process. However, a statistical model analysis shows that the average angular momentum ( = 4.5) deduced from this isomer yield ratio is consistent with average angular momentum for other products from low energy fission. 7 refs

Effect of Nitrogen and Phosphorus on Yield and Yield Components of Sesame (Sesamumindicum L.)

OpenAIRE

Muhammad Ibrahim; Manzoor Hussain; Ahmad Khan; Yousaf Jamal; Muhammad Ali; Muhammad Faisal Anwar Malik

2014-01-01

Nitrogen is a structural component of chlorophyll and protein therefore adequate supply of nitrogen is beneficial for both carbohydrates and protein metabolism as it promotes cell division and cell enlargement, resulting in more leaf area and thus ensuring good seed and dry matter yield. Theexperiment entitled effect of nitrogen and phosphorus on yield and yield components of sesame were conducted at New Developmental Farm of the University of Agriculture Peshawar during kharif 2013. Randomiz...

Optimization of krypton yields for rp-process studies at ISOLDE (CERN)

CERN Document Server

Kankainen, Anu Kristiina; Fraile-Prieto, L M; Jokinen, A; Leitner, M S; Oinonen, M; Peräjärvi, K; Ravn, H L

2004-01-01

The production of neutron-deficient krypton isotopes having astrophysical importance has been studied at the ISOLDE PBS facility at CERN. To investigate several effects on the yield a Monte Carlo code has been extensively applied.

Yield and economic performance of organic and conventional cotton-based farming systems--results from a field trial in India.

Science.gov (United States)

Forster, Dionys; Andres, Christian; Verma, Rajeev; Zundel, Christine; Messmer, Monika M; Mäder, Paul

2013-01-01

The debate on the relative benefits of conventional and organic farming systems has in recent time gained significant interest. So far, global agricultural development has focused on increased productivity rather than on a holistic natural resource management for food security. Thus, developing more sustainable farming practices on a large scale is of utmost importance. However, information concerning the performance of farming systems under organic and conventional management in tropical and subtropical regions is scarce. This study presents agronomic and economic data from the conversion phase (2007-2010) of a farming systems comparison trial on a Vertisol soil in Madhya Pradesh, central India. A cotton-soybean-wheat crop rotation under biodynamic, organic and conventional (with and without Bt cotton) management was investigated. We observed a significant yield gap between organic and conventional farming systems in the 1(st) crop cycle (cycle 1: 2007-2008) for cotton (-29%) and wheat (-27%), whereas in the 2(nd) crop cycle (cycle 2: 2009-2010) cotton and wheat yields were similar in all farming systems due to lower yields in the conventional systems. In contrast, organic soybean (a nitrogen fixing leguminous plant) yields were marginally lower than conventional yields (-1% in cycle 1, -11% in cycle 2). Averaged across all crops, conventional farming systems achieved significantly higher gross margins in cycle 1 (+29%), whereas in cycle 2 gross margins in organic farming systems were significantly higher (+25%) due to lower variable production costs but similar yields. Soybean gross margin was significantly higher in the organic system (+11%) across the four harvest years compared to the conventional systems. Our results suggest that organic soybean production is a viable option for smallholder farmers under the prevailing semi-arid conditions in India. Future research needs to elucidate the long-term productivity and profitability, particularly of cotton and

Study on Yield and Yield Components of Wheat Genotypes under Different Moisture Regimes

Directory of Open Access Journals (Sweden)

E. Mogtader

2012-10-01

Full Text Available In order to study grain yield and yield components of 16 advanced wheat lines under rainfed and supplementary irrigation conditions, this research was conducted in randomized block design with 3 replications at Maragheh Research Station during 2008-09 seasons. Analysis of variance revealed significant differences for date to heading, plant height, 1000 kernel weight, tiller number, spike length, seed number per spike, spikelet number per spike, peduncle length, harvest index, leaf, sheath length and grain yield. Results also showed that the lines No. 4 (91-142 a 61/3/F35.70/MO73//1D13.1/MLT and 16 (Azar2 with 1895 and 1878 Kg/ha, lines No. 4 and 7 (YUMAI13/5/NAI60/3/14.53/ODIN//CI13441 with 2132 and 2285 Kg/ha had highest grain yield under rainfed and supplementary irrigated conditions respectively. Based on results these 16 lines and cultivars were grouped in 4 and 3 distinct classes using Ward’s Method of cluster analysis under rainfed and irrigated conditions. Path analysis indicated that vigor at shooting stage, seed number per spike and HI were positive important traits to select lines for high yielding potential in this study. HI and TKW had also positive effects on grain under supplementary irrigation.

On possibilities to decrease influence of oxidation processes on oil yield at oil shale retorting

International Nuclear Information System (INIS)

Yefimov, V.; Loeoeper, R.; Doilov, S.; Kundel, H.

1993-01-01

At the present technical level retorting is carried out so that an increase in specific air consumption results in an increase of oxygen ingress into the semi coking shaft. At the same time a direct relationship between the degree of volatiles pyrolysis and specific air consumption was observed. This regularity enables to assume that within the reaction volume there occurs most likely the thermo oxidative pyrolysis of volatile products, not the oxidation of oil shale as it is considered traditionally. The main source of oxygen ingress ed into the semi coking shaft at processing oil shale in retorts is the process of spent shale. This process is not fully elaborated for utilization in commercial scale and can not be arranged so that the ingress of oxygen into the smacking chamber could be eliminated. In case of a slower semi coke gasification process and reduced specific air consumption for gasification the absolute amount of oxygen ingress ed into the semi coking shaft also decreases. One of the efficient methods to decrease specific air consumption is to build furnaces into the semi coking chamber to obtain additional amount of heat carrier by combusting generator gas. The maximum effect is reached when steam-and-air blow is completely replaced by recycle gas: specific air consumption is reduced whereas recycle gas is deoxygenated in the cooling zone while passing through spent shale bed which has the temperature of about 500 deg C. Another possible source of oxygen to the semi coking shaft with heat carrier is production of flue gases by combusting recycle gas in burners built in retorts. We consider the recycle gas employed upon processing oil shale in retorts hardly to be an appreciable source of the oxygen ingress into the semi coking shaft. Additional amounts of residual oxygen containing in recycle gas fed into both cooling zone and furnaces are practically totally consumed at gas combusting and passing across the bed of semi coke heated up to approximately

Yield Improvement and Energy Savings Uing Phosphonates as Additives in Kraft pulping

Energy Technology Data Exchange (ETDEWEB)

Ulrike W. Tschirner; Timothy Smith

2007-03-31

Project Objective: Develop a commercially viable modification to the Kraft process resulting in energy savings, increased yield and improved bleachability. Evaluate the feasibility of this technology across a spectrum of wood species used in North America. Develop detailed fundamental understanding of the mechanism by which phosphonates improve KAPPA number and yield. Evaluate the North American market potential for the use of phosphonates in the Kraft pulping process. Examine determinants of customer perceived value and explore organizational and operational factors influencing attitudes and behaviors. Provide an economic feasibility assessment for the supply chain, both suppliers (chemical supply companies) and buyers (Kraft mills). Provide background to most effectively transfer this new technology to commercial mills.

Prediction of Pectin Yield and Quality by FTIR and Carbohydrate Microarray Analysis

DEFF Research Database (Denmark)

Baum, Andreas; Dominiak, Malgorzata Maria; Vidal-Melgosa, Silvia

2017-01-01

and carbohydrate microarray analysis were performed directly on the crude lime peel extracts during the time course of the extractions. Multivariate analysis of the data was carried out to predict final pectin yields. Fourier transform infrared spectroscopy (FTIR) was found applicable for determining the optimal...... extraction time for the enzymatic and acidic extraction processes, respectively. The combined results of FTIR and carbohydrate microarray analysis suggested major differences in the crude pectin extracts obtained by enzymatic and acid extraction, respectively. Enzymatically extracted pectin, thus, showed......, and that FTIR and carbohydrate microarray analysis have potential to be developed into online process analysis tools for prediction of pectin extraction yields and pectin features from measurements on crude pectin extracts....

Using historical wafermap data for automated yield analysis

International Nuclear Information System (INIS)

Tobin, K.W.; Karnowski, T.P.; Gleason, S.S.; Jensen, D.; Lakhani, F.

1999-01-01

To be productive and profitable in a modern semiconductor fabrication environment, large amounts of manufacturing data must be collected, analyzed, and maintained. This includes data collected from in- and off-line wafer inspection systems and from the process equipment itself. This data is increasingly being used to design new processes, control and maintain tools, and to provide the information needed for rapid yield learning and prediction. Because of increasing device complexity, the amount of data being generated is outstripping the yield engineer close-quote s ability to effectively monitor and correct unexpected trends and excursions. The 1997 SIA National Technology Roadmap for Semiconductors highlights a need to address these issues through open-quotes automated data reduction algorithms to source defects from multiple data sources and to reduce defect sourcing time.close quotes SEMATECH and the Oak Ridge National Laboratory have been developing new strategies and technologies for providing the yield engineer with higher levels of assisted data reduction for the purpose of automated yield analysis. In this article, we will discuss the current state of the art and trends in yield management automation. copyright 1999 American Vacuum Society

Backscattering study and theoretical investigation of planar channeling processes. I. Experimental results

International Nuclear Information System (INIS)

Abel, F.; Amsel, G.; Bruneaux, M.; Cohen, C.; L'Hoir, A.

1975-01-01

Backscattering experiments in planar channeling have been performed on iron single crystals with 1.9-MeV 4 He beams; these conditions having been chosen for optimal study of the structure of the spectra. Both for the (110) and (100) planes five equally spaced yield maxima are clearly resolved, the maxima damping out at lower energies. Spectra were also registered at various angles of incidence phi 0 with respect to the planes. Yield maxima are observed up to values of phi 0 twice the half-width at half-minimum psi 1 / 2 of an angular scan across the plane psi 1 / 2 =18' for the (110) plane. Except for the first two peaks, these maxima have the same spacing as in the aligned spectrum. They appear to be due to particles belonging to a well-defined transverse energy interval. The mean stopping power for these particles is close to the random stopping power and the mean half-wavelength of their oscillating trajectories in the planar channels calculated from the results is lambda=380 A for the (110) plane and lambda=320 A for the (100) plane. For phi 0 >1.2psi 1 / 2 , the yield on the first maximum is greater than the random yield, reaching approx.1.6 times the latter for 1.4psi 1 / 2 0 1 / 2 . The shoulder effect in the angular scans, as observed for various depths, is clearly related to the yield maxima and hence depends strongly on the position and width of the depth interval chosen. The meaning and validity of the assumption of statistical equilibrium for planar channeled particles are discussed in light of the results

Studies of the physical, yield and failure behavior of aliphatic polyketones

Science.gov (United States)

Karttunen, Nicole Renee

This thesis describes an investigation into the multiaxial yield and failure behavior of an aliphatic polyketone terpolymer. The behavior is studied as a function of: stress state, strain rate, temperature, and sample processing conditions. Results of this work include: elucidation of the behavior of a recently commercialized polymer, increased understanding of the effects listed above, insight into the effects of processing conditions on the morphology of the polyketone, and a description of yield strength of this material as a function of stress state, temperature, and strain rate. The first portion of work focuses on the behavior of a set of samples that are extruded under "common" processing conditions. Following this reference set of tests, the effect of testing this material at different temperatures is studied. A total of four different temperatures are examined. In addition, the effect of altering strain rate is examined. Testing is performed under pseudo-strain rate control at constant nominal octahedral shear strain rate for each failure envelope. A total of three different rates are studied. An extension of the first portion of work involves modeling the yield envelope. This is done by combining two approaches: continuum level and molecular level. The use of both methods allows the description of the yield envelope as a function of stress state, strain rate and temperature. The second portion of work involves the effects of processing conditions. For this work, additional samples are extruded with different shear and thermal histories than the "standard" material. One set of samples is processed with shear rates higher and lower than the standard. A second set is processed at higher and lower cooling rates than the standard. In order to understand the structural cause for changes in behavior with processing conditions, morphological characterization is performed on these samples. In particular, the effect on spherulitic structure is important. Residual

Evaluation of yield and yield components and some agronomic traits of white bean genotypes under Karaj climate

Directory of Open Access Journals (Sweden)

M. Ebrahimi

2016-04-01

Full Text Available In order to study compatibility of 30 white bean genotypes under Karaj climate, an experiment was conducted based on randomized Complete Block Design with four replications. Evaluation and statistical analysis was performed for 18 important traits. Analysis of variance results showed that there are significant differences between varieties for all traits. Results of genotypes means comparison with Duncan’s multiple range test showed that genotype No. 29 was better than others in plant height, yield, and biological yield, seed no. per plant and pod weight traits. Simple correlation coefficients were significant between yield and weight of pod, biological yield, number of seed per plant, number of pod per plant, plant height, width of pod and number of seed per pod. Only pod length was negative correlated with yield between all investigated traits. Cluster analysis with UPGMA method arrangement genotypes into three groups. According to this experiment results we can recommend 29 and 30 genotypes for Karaj condition

Analysis of B{yields}K{sup *}{sub J}({yields}K{pi}){mu}{sup +}{mu}{sup -} in the higher kaon resonance region

Energy Technology Data Exchange (ETDEWEB)

Lue, Cai-Dian [Institute of High Energy Physics, Beijing, BJ (China); Wang, Wei [Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany)

2011-11-15

We study the resonant contributions in the process anti B{sup 0} {yields} K{sup -} {pi}{sup +}{mu}{sup +}{mu}{sup -} with the K{sup -}{pi}{sup +} invariant mass square m{sup 2}{sub K{pi}} element of [1, 5] GeV{sup 2}. Width effects of the involved strange mesons, K{sup *}(1410), K{sup *}{sub 0}(1430), K{sup *}{sub 2}(1430), K{sup *}(1680), K{sup *}{sub 3}(1780) and K{sup *}{sub 4}(2045), are incorporated. In terms of the helicity amplitudes, we derive a compact form for the full angular distributions, through which the branching ratios, forward-backward asymmetries and polarizations are attained. We propose that the uncertainties in the B {yields} K{sup *}{sub J} form factors can be pinned down by the measurements of a set of SU(3)-related processes. Using results from the large energy limit, we derive the dependence of branching fractions on the m{sub K{pi}}, and find that the K{sup *}{sub 2} resonance has a clear signature, in particular, in the transverse polarizations. (orig.)

growth and yield response of carrot (daucus carota l.)

African Journals Online (AJOL)

User

Mampong Campus to investigate the growth and yield responses of carrot to different rates of soil amendments ... quires a deep and well-drained loamy soil with high amount of ... The factors considered in the ..... processing carrot root yields.

Estimation of rice yield affected by drought and relation between rice yield and TVDI

Science.gov (United States)

Hongo, C.; Tamura, E.; Sigit, G.

2016-12-01

Impact of climate change is not only seen on food production but also on food security and sustainable development of society. Adaptation to climate change is a pressing issue throughout the world to reduce the risks along with the plans and strategies for food security and sustainable development. As a key adaptation to the climate change, agricultural insurance is expected to play an important role in stabilizing agricultural production through compensating the losses caused by the climate change. As the adaptation, the Government of Indonesia has launched agricultural insurance program for damage of rice by drought, flood and pest and disease. The Government started a pilot project in 2013 and this year the pilot project has been extended to 22 provinces. Having the above as background, we conducted research on development of new damage assessment method for rice using remote sensing data which could be used for evaluation of damage ratio caused by drought in West Java, Indonesia. For assessment of the damage ratio, estimation of rice yield is a key. As the result of our study, rice yield affected by drought in dry season could be estimated at level of 1 % significance using SPOT 7 data taken in 2015, and the validation result was 0.8t/ha. Then, the decrease ratio in rice yield about each individual paddy field was calculated using data of the estimated result and the average yield of the past 10 years. In addition, TVDI (Temperature Vegetation Dryness Index) which was calculated from Landsat8 data in heading season indicated the dryness in low yield area. The result suggests that rice yield was affected by irrigation water shortage around heading season as a result of the decreased precipitation by El Nino. Through our study, it becomes clear that the utilization of remote sensing data can be promising for assessment of the damage ratio of rice production precisely, quickly and quantitatively, and also it can be incorporated into the insurance procedures.

Decomposing global crop yield variability

Science.gov (United States)

Ben-Ari, Tamara; Makowski, David

2014-11-01

Recent food crises have highlighted the need to better understand the between-year variability of agricultural production. Although increasing future production seems necessary, the globalization of commodity markets suggests that the food system would also benefit from enhanced supplies stability through a reduction in the year-to-year variability. Here, we develop an analytical expression decomposing global crop yield interannual variability into three informative components that quantify how evenly are croplands distributed in the world, the proportion of cultivated areas allocated to regions of above or below average variability and the covariation between yields in distinct world regions. This decomposition is used to identify drivers of interannual yield variations for four major crops (i.e., maize, rice, soybean and wheat) over the period 1961-2012. We show that maize production is fairly spread but marked by one prominent region with high levels of crop yield interannual variability (which encompasses the North American corn belt in the USA, and Canada). In contrast, global rice yields have a small variability because, although spatially concentrated, much of the production is located in regions of below-average variability (i.e., South, Eastern and South Eastern Asia). Because of these contrasted land use allocations, an even cultivated land distribution across regions would reduce global maize yield variance, but increase the variance of global yield rice. Intermediate results are obtained for soybean and wheat for which croplands are mainly located in regions with close-to-average variability. At the scale of large world regions, we find that covariances of regional yields have a negligible contribution to global yield variance. The proposed decomposition could be applied at any spatial and time scales, including the yearly time step. By addressing global crop production stability (or lack thereof) our results contribute to the understanding of a key

Classifying Multi-Model Wheat Yield Impact Response Surfaces Showing Sensitivity to Temperature and Precipitation Change

Science.gov (United States)

Fronzek, Stefan; Pirttioja, Nina; Carter, Timothy R.; Bindi, Marco; Hoffmann, Holger; Palosuo, Taru; Ruiz-Ramos, Margarita; Tao, Fulu; Trnka, Miroslav; Acutis, Marco;

Effects of heterosis for yield and yield components obtained by crossing divergent alfalfa populations

Directory of Open Access Journals (Sweden)

Katić Slobodan

2010-01-01

Full Text Available When breeding alfalfa for yield performance, it is necessary to use high-yielding parents obtained by different breeding methods. The assumption at the onset of this research was that crossing highest-yielding domestic cultivars with divergent populations from geographically distant breeding centers could result in the expression of heterotic effects in their hybrids contributing to increased alfalfa yield. The objective of this study was to determine yield and yield components and heterotic effects in hybrid progenies obtained by crossing the domestic cultivars NS Banat ZMS II and NS Mediana ZMS V with the cultivars Pella, Dolichi and Hyliki from Greece, UMSS 2001 from Bolivia and Jogeva 118 from Estonia in two series. The field trial planted in 2006, included 13 F1 hybrids and 6 of 7 initial parents in both series. Heterotic effects for yields of forage and hay were observed in 4 combinations (C NS Banat ZMS II x E Hyliki; C NS Banat ZMS II x E UMSS 2001; C NS Mediana ZMS V x E Hyliki; C NS Mediana ZMS V x E Dolichi. The populations that exhibited heterosis in a set of crossings are recommended for use as parent components for development of high-yielding synthetic alfalfa cultivars. .

A Low-cost, High-yield Process for the Direct Productin of High Energy Density Liquid Fuel from Biomass

Energy Technology Data Exchange (ETDEWEB)

Agrawal, Rakesh [Purdue Univ., West Lafayette, IN (United States); Delgass, W. N. [Purdue Univ., West Lafayette, IN (United States); Ribeiro, F. [Purdue Univ., West Lafayette, IN (United States)

2013-08-31

The primary objective and outcome of this project was the development and validation of a novel, low-cost, high-pressure fast-hydropyrolysis/hydrodeoxygenation (HDO) process (H₂Bioil) using supplementary hydrogen (H₂) to produce liquid hydrocarbons from biomass. The research efforts under the various tasks of the project have culminated in the first experimental demonstration of the H₂Bioil process, producing 100% deoxygenated >C4+ hydrocarbons containing 36-40% of the carbon in the feed of pyrolysis products from biomass. The demonstrated H{sub 2}Bioil process technology (i.e. reactor, catalyst, and downstream product recovery) is scalable to a commercial level and is estimated to be economically competitive for the cases when supplementary H₂ is sourced from coal, natural gas, or nuclear. Additionally, energy systems modeling has revealed several process integration options based on the H₂Bioilprocess for energy and carbon efficient liquid fuel production. All project tasks and milestones were completed or exceeded. Novel, commercially-scalable, high-pressure reactors for both fast-hydropyrolysis and hydrodeoxygenation were constructed, completing Task A. These reactors were capable of operation under a wide-range of conditions; enabling process studies that lead to identification of optimum process conditions. Model compounds representing biomass pyrolysis products were studied, completing Task B. These studies were critical in identifying and developing HDO catalysts to target specific oxygen functional groups. These process and model compound catalyst studies enabled identification of catalysts that achieved 100% deoxygenation of the real biomass feedstock, sorghum, to form hydrocarbons in high yields as part of Task C. The work completed during this grant has identified and validated the novel and commercially scalable H₂Bioil process for production of hydrocarbon fuels from biomass. Studies on

Results of the Abbott RealTime HIV-1 Assay for Specimens Yielding “Target Not Detected” Results by the Cobas AmpliPrep/Cobas TaqMan HIV-1 Test▿

OpenAIRE

Babady, N. Esther; Germer, Jeffrey J.; Yao, Joseph D. C.

2009-01-01

No significantly discordant results were observed between the Abbott RealTime HIV-1 assay and the COBAS AmpliPrep/COBAS TaqMan HIV-1 Test (CTM) among 1,190 unique clinical plasma specimens obtained from laboratories located in 40 states representing all nine U.S. geographic regions and previously yielding “target not detected” results by CTM.

Higgs production in vector boson fusion in the H{yields} {tau}{tau} {yields} ll + 4{nu} final state with ATLAS. A sensitivity study

Energy Technology Data Exchange (ETDEWEB)

Schmitz, Martin

2011-05-15

A study of the expected sensitivity of the ATLAS experiment to discover the Standard Model Higgs boson produced via vector boson fusion (VBF) and its decay to H{yields} {tau}{tau} {yields} ll + 4{nu} is presented. The study is based on simulated proton-proton collisions at a centre-of-mass energy of 14 TeV. For the rst time the discovery potential is evaluated in the presence of additional proton-proton interactions (pile-up) to the process of interest in a complete and consistent way. Special emphasis is placed on the development of background estimation techniques to extract the main background processes Z{yields} {tau}{tau} and t anti t production using data. The t anti t background is estimated using a control sample selected with the VBF analysis cuts and the inverted b-jet veto. The dominant background process Z {yields} {tau}{tau} is estimated using Z{yields} {mu}{mu} events. Replacing the muons of the Z{yields} {mu}{mu} event with simulated {tau}-leptons, Z {yields} {tau}{tau} events are modelled to high precision. For the replacement of the Z boson decay products a dedicated method based on tracks and calorimeter cells is developed. Without pile-up a discovery potential of 3{sigma} to 3.4{sigma} in the mass range 115 GeV

Comparison of bio-hydrogen production yield capacity between asynchronous and simultaneous saccharification and fermentation processes from agricultural residue by mixed anaerobic cultures.

Science.gov (United States)

Li, Yameng; Zhang, Zhiping; Zhu, Shengnan; Zhang, Huan; Zhang, Yang; Zhang, Tian; Zhang, Quanguo

2018-01-01

Taken common agricultural residues as substrate, dark fermentation bio-hydrogen yield capacity from asynchronous saccharification and fermentation (ASF) and simultaneous saccharification and fermentation (SSF) was investigated. The highest hydrogen yield of 472.75mL was achieved with corncob using ASF. Hydrogen yield from corn straw, rice straw, corncob and sorghum stalk by SSF were 20.54%,10.31%,13.99% and 5.92% higher than ASF, respectively. The experimental data fitted well to the modified Gompertz model. SSF offered a distinct advantage over ASF with respect to reducing overall process time (60h of SSF, 108h of ASF). Meanwhile, SSF performed better than SSF with respect to shortening the lag-stage. The major metabolites of anaerobic fermentation hydrogen production by ASF and SSF were butyric acid and acetic acid. Copyright © 2017 Elsevier Ltd. All rights reserved.

Yield and economic performance of organic and conventional cotton-based farming systems--results from a field trial in India.

Directory of Open Access Journals (Sweden)

Dionys Forster

Full Text Available The debate on the relative benefits of conventional and organic farming systems has in recent time gained significant interest. So far, global agricultural development has focused on increased productivity rather than on a holistic natural resource management for food security. Thus, developing more sustainable farming practices on a large scale is of utmost importance. However, information concerning the performance of farming systems under organic and conventional management in tropical and subtropical regions is scarce. This study presents agronomic and economic data from the conversion phase (2007-2010 of a farming systems comparison trial on a Vertisol soil in Madhya Pradesh, central India. A cotton-soybean-wheat crop rotation under biodynamic, organic and conventional (with and without Bt cotton management was investigated. We observed a significant yield gap between organic and conventional farming systems in the 1(st crop cycle (cycle 1: 2007-2008 for cotton (-29% and wheat (-27%, whereas in the 2(nd crop cycle (cycle 2: 2009-2010 cotton and wheat yields were similar in all farming systems due to lower yields in the conventional systems. In contrast, organic soybean (a nitrogen fixing leguminous plant yields were marginally lower than conventional yields (-1% in cycle 1, -11% in cycle 2. Averaged across all crops, conventional farming systems achieved significantly higher gross margins in cycle 1 (+29%, whereas in cycle 2 gross margins in organic farming systems were significantly higher (+25% due to lower variable production costs but similar yields. Soybean gross margin was significantly higher in the organic system (+11% across the four harvest years compared to the conventional systems. Our results suggest that organic soybean production is a viable option for smallholder farmers under the prevailing semi-arid conditions in India. Future research needs to elucidate the long-term productivity and profitability, particularly of cotton

Bulk yields of nucleosynthesis from massive stars

International Nuclear Information System (INIS)

Arnett, W.D.

1978-01-01

Preliminary estimates are made of the absolute yields of abundant nuclei synthesized in observed stars. The compositions of nine helium stars of mass 3 or =10M/sub sun/ is estimated. A variety of choices for the initial mass function (IMF) are used to calculate the yield per stellar generation. For standard choices of the (IMF) the absolute and relative yields of 12 C, 16 O, 20 Ne, 24 Mg, the Si to Ca group, and the iron group agree with solar system values, to the accuracy of the calculations. The relative yields are surprisingly insensitive to the slope of the IMF. In a second approach, using standard estimates (Ostriker, Richstone, and Thuan) for the current rate of stellar death, I find the present rate of nucleosynthesis in the solar neighborhood to be about 10%of the average rate over galactic history. This result is consistent with many standard models of galactic evolution (for example, the Schmidt model in which star formation goes as gas density squared). It appears that if the star formation rate is high enough to produce the stars we see around us, then the nucleosynthesis rate is large enough to produce the processed nuclei (except 4 He) seen in those stars. The typical nucleosynthesis source is massive (Mapprox. =30 M/sub sun/); the death rate of such stars is a small fraction (3-10%) of recent estimates of the total rate of supernovae

Effects of low doses of gamma rays on yield, yield components, and other characters of two maize varieties

International Nuclear Information System (INIS)

Yousif, Z. B.; Jabbo, N. F.; Khalaf, M. Z.; Majid, A. H.; Ali, H. J.

1994-01-01

The study was conducted during the fall of 1991 and 1992 at Al-Latyfia Experimental Station to determine the effect of low doses of gamma rays on yield, yield components, and other characters of two maize varieties. Five doses were used in addition to control. A factorial experiment with randomized complete block design in three replications was used in the study. Results revealed that there was significant difference between varieties in plant and ear height in 1992. However, differences between varieties were also significantly affected by most yield component characters. Low doses significantly affected plant height, weight of 500 kernels in 1991, and kernel row number in 1992. Grain yield was affected significantly in 1991 and 1992 by low doses. Results showed that 2.0 krad was the most useful low dose to increase grain yield, whereas there was no significant effect between varieties in grain yield. 7 refs., 6 tabs

Yielding to stress: Recent developments in viscoplastic fluid mechanics

OpenAIRE

BALMFORTH, Neil; FRIGAARD, Ian A.; OVARLEZ, Guillaume

2014-01-01

The archetypal feature of a viscoplastic fluid is its yield stress: If the material is not sufficiently stressed, it behaves like a solid, but once the yield stress is exceeded, the material flows like a fluid. Such behavior characterizes materials common in industries such as petroleum and chemical processing, cosmetics, and food processing and in geophysical fluid dynamics. The most common idealization of a viscoplastic fluid is the Bingham model, which has been widely used to rationalize e...

Interaction Between Phosphorus and Zinc on the Biomass Yield and Yield Attributes of the Medicinal Plant Stevia (Stevia rebaudiana)

Science.gov (United States)

Das, Kuntal; Dang, Raman; Shivananda, T. N.; Sur, Pintu

2005-01-01

A greenhouse experiment was conducted at the Indian Institute of Horticultural Research (IIHR), Bangalore to study the interaction effect between phosphorus (P) and zinc (Zn) on the yield and yield attributes of the medicinal plant stevia. The results show that the yield and yield attributes have been found to be significantly affected by different treatments. The total yield in terms of biomass production has been increased significantly with the application of Zn and P in different combinations and methods, being highest (23.34 g fresh biomass) in the treatment where Zn was applied as both soil (10 kg ZnSO4/ha) and foliar spray (0.2% ZnSO4). The results also envisaged that the different yield attributes viz. height, total number of branches, and number of leaves per plant have been found to be varied with treatments, being highest in the treatment where Zn was applied as both soil and foliar spray without the application of P. The results further indicated that the yield and yield attributes of stevia have been found to be decreased in the treatment where Zn was applied as both soil and foliar spray along with P suggesting an antagonistic effect between Zn and P. PMID:15915292

Interaction Between Phosphorus and Zinc on the Biomass Yield and Yield Attributes of the Medicinal Plant Stevia (Stevia rebaudiana

Directory of Open Access Journals (Sweden)

Kuntal Das

2005-01-01

Full Text Available A greenhouse experiment was conducted at the Indian Institute of Horticultural Research (IIHR, Bangalore to study the interaction effect between phosphorus (P and zinc (Zn on the yield and yield attributes of the medicinal plant stevia. The results show that the yield and yield attributes have been found to be significantly affected by different treatments. The total yield in terms of biomass production has been increased significantly with the application of Zn and P in different combinations and methods, being highest (23.34 g fresh biomass in the treatment where Zn was applied as both soil (10 kg ZnSO4/ha and foliar spray (0.2% ZnSO4. The results also envisaged that the different yield attributes viz. height, total number of branches, and number of leaves per plant have been found to be varied with treatments, being highest in the treatment where Zn was applied as both soil and foliar spray without the application of P. The results further indicated that the yield and yield attributes of stevia have been found to be decreased in the treatment where Zn was applied as both soil and foliar spray along with P suggesting an antagonistic effect between Zn and P.

Are GM Crops for Yield and Resilience Possible?

Science.gov (United States)

Paul, Matthew J; Nuccio, Michael L; Basu, Shib Sankar

2018-01-01

Crop yield improvements need to accelerate to avoid future food insecurity. Outside Europe, genetically modified (GM) crops for herbicide- and insect-resistance have been transformative in agriculture; other traits have also come to market. However, GM of yield potential and stress resilience has yet to impact on food security. Genes have been identified for yield such as grain number, size, leaf growth, resource allocation, and signaling for drought tolerance, but there is only one commercialized drought-tolerant GM variety. For GM and genome editing to impact on yield and resilience there is a need to understand yield-determining processes in a cell and developmental context combined with evaluation in the grower environment. We highlight a sugar signaling mechanism as a paradigm for this approach. Copyright © 2017 Elsevier Ltd. All rights reserved.

PARTICULARITIES OF BUDGETING OF INVESTMENTS YIELD

Directory of Open Access Journals (Sweden)

ANCA JARMILA GUŢĂ

2011-01-01

Full Text Available The paper presents some particularities of the budget process of all the investments as a main aspect in taking the best decision according to the main use of all the firms’ resources. As a measure method of the investments yield the main one is that which describes the relationship between the profit and the investment which improves the deccisional process.

High Titer and Yields Achieved with Novel, Low-Severity Pretreatment Strategy

Energy Technology Data Exchange (ETDEWEB)

2016-03-01

NREL researchers obtained high concentration sugar syrups in enzymatic hydrolysis that are fermentable to ethanol and other advanced biofuels and intermediate products at high yields. The novel DMR process is simpler and bypasses all severe pretreatment methods, thus reducing the environmental impact. The results are unprecedented. Researchers achieved a high concentration of sugars (230g/L of monomeric sugar and 270 g/L total sugar) and this low toxicity, highly fermentable syrup yielded 86 g/L ethanol (> 90 percent conversion). In addition, the lignin streams from this process can readily be converted to jet or renewable diesel blendstocks through a hydrodeoxygenation step. The NREL-developed, low severity DMR process may potentially replace higher severity chemical pretreatments and associated expensive reactors constructed of exotic alloys with a simpler process, using commercial-scale equipment commonly associated with the pulp and paper industry, to produce high concentration, low toxicity sugar streams and highly reactive lignin streams from non-food renewable biomass for biological and catalytic upgrading to advanced biofuels and chemicals. The simpler DMR process with black liquor recycling could reduce environmental and life-cycle impacts, and repurpose shuttered pulp and paper mills to help revitalize rural economies.

Studies of initial stage in coal liquefaction. Effect of prethermal treatment condition with process solvent to increase oil yields; Ekika hanno no shoki katei ni kansuru kenkyu. Sekitan no maeshori joken to yozai koka

Energy Technology Data Exchange (ETDEWEB)

Shindo, T.; Komatsu, N.; Kishimoto, M.; Okui, T.; Kaneko, T.; Shimasaki, K. [Nippon Brown Coal Liquefaction Co. ltd., Tokyo (Japan)

1996-10-28

Process solvent was hydrogenated in the brown coal liquefaction, to investigate the influence of it on the prethermal treatment and liquefaction. Consequently, it was found that the n-hexane soluble (HS) yield was improved. In this study, capacity of hydrogen transfer from solvent during prethermal treatment and effects of catalyst were investigated. Since prethermal treatment in oil was effective for improving the oil yield in the presence of hydrogen/catalyst or high hydrogen-donor solvent, influence of hydrogen-donor performance of solvent or addition of catalyst on the hydrogenation behavior of coal and the characteristics of products during prethermal treatment were investigated in relation to successive liquefaction results. As a result, it was found that the increase of HS yield was due to the acceleration of conversion of THF-insoluble using high hydrogen-donor solvent and/or by adding catalyst. It was also found that the use of high hydrogen-donor solvent and highly active catalyst at the stage of prethermal treatment before the successive liquefaction was effective for improving the HS yield, i.e., liquefied oil yield. 2 refs., 5 figs., 1 tab.

Changing forest water yields in response to climate warming: results from long-term experimental watershed sites across North America

Science.gov (United States)

Creed, Irena F; Spargo, Adam T; Jones, Julia A; Buttle, Jim M; Adams, Mary B; Beall, Fred D; Booth, Eric G; Campbell, John L; Clow, Dave; Elder, Kelly; Green, Mark B; Grimm, Nancy B; Miniat, Chelcy; Ramlal, Patricia; Saha, Amartya; Sebestyen, Stephen; Spittlehouse, Dave; Sterling, Shannon; Williams, Mark W; Winkler, Rita; Yao, Huaxia

2014-01-01

Climate warming is projected to affect forest water yields but the effects are expected to vary. We investigated how forest type and age affect water yield resilience to climate warming. To answer this question, we examined the variability in historical water yields at long-term experimental catchments across Canada and the United States over 5-year cool and warm periods. Using the theoretical framework of the Budyko curve, we calculated the effects of climate warming on the annual partitioning of precipitation (P) into evapotranspiration (ET) and water yield. Deviation (d) was defined as a catchment's change in actual ET divided by P [AET/P; evaporative index (EI)] coincident with a shift from a cool to a warm period – a positive d indicates an upward shift in EI and smaller than expected water yields, and a negative d indicates a downward shift in EI and larger than expected water yields. Elasticity was defined as the ratio of interannual variation in potential ET divided by P (PET/P; dryness index) to interannual variation in the EI – high elasticity indicates low d despite large range in drying index (i.e., resilient water yields), low elasticity indicates high d despite small range in drying index (i.e., nonresilient water yields). Although the data needed to fully evaluate ecosystems based on these metrics are limited, we were able to identify some characteristics of response among forest types. Alpine sites showed the greatest sensitivity to climate warming with any warming leading to increased water yields. Conifer forests included catchments with lowest elasticity and stable to larger water yields. Deciduous forests included catchments with intermediate elasticity and stable to smaller water yields. Mixed coniferous/deciduous forests included catchments with highest elasticity and stable water yields. Forest type appeared to influence the resilience of catchment water yields to climate warming, with conifer and deciduous catchments more susceptible to

Effect of Application of Pseudomonas fluorescent Strains on Yield and Yield Components of Rapeseed Cultivars

Directory of Open Access Journals (Sweden)

R Najafi

2015-09-01

Full Text Available Plant growth promoting rhizobacteria has been identified as an alternative to chemical fertilizer to enhance plant growth and yield directly and indirectly. Use of rhizosphere free living bacteria is one of the methods for crop production and leads to improvement of resources absorption. In order to study of yield, yield components and radiation use efficiency, under application of PGPR condition, an experiment was carried out in 2008 growing season at Agriculture and natural resources research station of Mashhad. The cultivars selected from three rapeseed species belong to Brassica napus, Brassica rapa and Brassica juncea (landrace, BP.18، Goldrush، Parkland، Hyola330، Hyola401. Experimental factorial design was randomized in complete block with three replications. Treatments included six varieties of Rapeseed and inoculations were four levels as non–inoculation, inoculation with P. fluorescens169, P. putida108 and use then together. Results showed that strains of fluorescent pseudomonas bacteria had greatest effects on yield and yield components cultivars. A significant difference in the number of pods per plant and 1000 seed weight observed. The cultivars were different in all treats except 1000 seed weight. Overall results indicated that application of growth stimulating bacteria in combination with different cultivars, had a positive effect growth, yield characteristics of plant varieties of rapeseed plants.

Ionization yield and absorption spectra reveal superexcited Rydberg state relaxation processes in H{sub 2}O and D{sub 2}O

Energy Technology Data Exchange (ETDEWEB)

Fillion, J-H [LERMA, CNRS-UMR 8112, Observatoire de Paris-Meudon, 5 place J Janssen, F-92195, Meudon (France); Dulieu, F [LERMA, CNRS-UMR 8112, Observatoire de Paris-Meudon, 5 place J Janssen, F-92195, Meudon (France); Baouche, S [LERMA, CNRS-UMR 8112, Observatoire de Paris-Meudon, 5 place J Janssen, F-92195, Meudon (France); Lemaire, J-L [LERMA, CNRS-UMR 8112, Observatoire de Paris-Meudon, 5 place J Janssen, F-92195, Meudon (France); Jochims, H W [Institut fuer Physikalische und Theoretische Chemie der Freien Universitaet Berlin, Takustrasse 3, D-14195 Berlin 33 (Germany); Leach, S [LERMA, CNRS-UMR 8112, Observatoire de Paris-Meudon, 5 place J Janssen, F-92195, Meudon (France)

2003-07-14

The absorption cross section and the ionization quantum yield of H{sub 2}O have been measured using a synchrotron radiation source between 9 and 22 eV. Comparison between the two curves highlights competition between relaxation processes for Rydberg states converging to the first A-tilde {sup 2}A{sub 1} and to the second B-tilde {sup 2}B{sub 2} excited states of H{sub 2}O{sup +}. Comparison with D{sub 2}O absorption and ionization yields, derived from Katayama et al (1973 J. Chem. Phys. 59 4309), reveals specific energy-dependent deuteration effects on competitive predissociation and autoionization relaxation channels. Direct ionization was found to be only slightly affected by deuteration.

Impacts of aerosol pollutant mitigation on lowland rice yields in China

Science.gov (United States)

Zhang, Tianyi; Li, Tao; Yue, Xu; Yang, Xiaoguang

2017-10-01

Aerosol pollution in China is significantly altering radiative transfer processes and is thereby potentially affecting rice photosynthesis and yields. However, the response of rice photosynthesis to aerosol-induced radiative perturbations is still not well understood. Here, we employ a process-based modelling approach to simulate changes in incoming radiation (RAD) and the diffuse radiation fraction (DF) with aerosol mitigation in China and their associated impacts on rice yields. Aerosol reduction has the positive effect of increasing RAD and the negative effect of decreasing DF on rice photosynthesis and yields. In rice production areas where the average RAD during the growing season is lower than 250 W m-2, aerosol reduction is beneficial for higher rice yields, whereas in areas with RAD>250 W m-2, aerosol mitigation causes yield declines due to the associated reduction in the DF, which decreases the light use efficiency. As a net effect, rice yields were estimated to significantly increase by 0.8%-2.6% with aerosol concentrations reductions from 20 to 100%, which is lower than the estimates obtained in earlier studies that only considered the effects of RAD. This finding suggests that both RAD and DF are important processes influencing rice yields and should be incorporated into future assessments of agricultural responses to variations in aerosol-induced radiation under climate change.

Evaluation of Image Processing Technique for Measuring of Nitrogen and Yield in Paddy Rice and Comparing it with Standard Methods

Directory of Open Access Journals (Sweden)

M.R Larijani

2011-09-01

Full Text Available In order to use new and low cost methods in precision agriculture, nitrogen should be supplied for plants on time and precisely. For determining the required nitrogen of paddy rice in the clustering stage, a series of experiments were conducted using three different methods of: image processing, kjeldahl and chlorophyll meter set (SPAD-502, in a randomized complete block design with three replications during 2010 at Rice Research Center of Tonekabon, Iran. Four experimental treatments were different level of fertilizer (Urea with 46% nitrogen. In the clustering stage, some images from rice plants were taken vertically by a digital camera and were analyzed using image processing technique. Simultaneously the chlorophyll index of plants was measured by SPAD-502 chlorophyll meter set and the percentage amount of nitrogen was measured using of the so called kjeldahl laboratory method. The results showed that the three methods of determining nitrogen of rice plant were highly correlated. Moreover, the correlation among the three methods and crop yield were almost the same. In general, the method of image processing could have a high potential for nitrogen management in the field, while this method was low-cost, faster and also nondestructive in comparison to the other methods.

Understanding the weather signal in national crop-yield variability

Science.gov (United States)

Frieler, Katja; Schauberger, Bernhard; Arneth, Almut; Balkovič, Juraj; Chryssanthacopoulos, James; Deryng, Delphine; Elliott, Joshua; Folberth, Christian; Khabarov, Nikolay; Müller, Christoph; Olin, Stefan; Pugh, Thomas A. M.; Schaphoff, Sibyll; Schewe, Jacob; Schmid, Erwin; Warszawski, Lila; Levermann, Anders

2017-06-01

Year-to-year variations in crop yields can have major impacts on the livelihoods of subsistence farmers and may trigger significant global price fluctuations, with severe consequences for people in developing countries. Fluctuations can be induced by weather conditions, management decisions, weeds, diseases, and pests. Although an explicit quantification and deeper understanding of weather-induced crop-yield variability is essential for adaptation strategies, so far it has only been addressed by empirical models. Here, we provide conservative estimates of the fraction of reported national yield variabilities that can be attributed to weather by state-of-the-art, process-based crop model simulations. We find that observed weather variations can explain more than 50% of the variability in wheat yields in Australia, Canada, Spain, Hungary, and Romania. For maize, weather sensitivities exceed 50% in seven countries, including the United States. The explained variance exceeds 50% for rice in Japan and South Korea and for soy in Argentina. Avoiding water stress by simulating yields assuming full irrigation shows that water limitation is a major driver of the observed variations in most of these countries. Identifying the mechanisms leading to crop-yield fluctuations is not only fundamental for dampening fluctuations, but is also important in the context of the debate on the attribution of loss and damage to climate change. Since process-based crop models not only account for weather influences on crop yields, but also provide options to represent human-management measures, they could become essential tools for differentiating these drivers, and for exploring options to reduce future yield fluctuations.

Yield and dimensional quality of sawnwood in Guantanamo

Directory of Open Access Journals (Sweden)

Ibian Leyva Miguel

2017-12-01

Full Text Available The paper was carried out in the mobile sawmills LT 40 Yammar and Pekín of the Integral Military Farm Disembark by Duaba and the fixed sawmill of Cayo Güin branded Armentía of the Baracoa Agroforestry Company between the months of November of the 2014 to December of 2015 with the aim of improving the yield and dimensional quality of the lumber of Pinus cubensis Griseb. With this as main objective, the quality of the raw material used (long, thick, conicity, ovality, eccentricity and curvature of the shaft was analyzed. The yield was through a representative sampling of 132 logs distributed in the different sawmills and for dimensional quality, 100 pieces. As result, was observed that the raw material used was homogeneous in the diameter of the logs and the defect of the wood in the three sawmills, but in the Cayo Güín site, the logs were of greater dimensions. The Yammar and Perkin sawmills have an average yield of 70% higher than the one obtained in Cayo Güin where the result was of 55.5%. Mobile sawmills have greater dimensional control of sawn timber due to lower variation of the total process, Nonetheless, is accurate to state that the sawing system in the Cayo Güin establishment is out of control.

Semileptonic form factors D{yields}{pi},K and B{yields}{pi},K from a fine lattice

Energy Technology Data Exchange (ETDEWEB)

Al-Haydari, A.; Ali Khan, A. [Taiz Univ. (Yemen). Dept. of Physics; Braun, V.M.; Collins, S.; Goeckeler, M.; Schaefer, A. [Regensburg Univ. (Germany). Inst. for Theoretical Physics; Lacagnina, G.N. [INFN, Milan (Italy); Panero, M. [Regensburg Univ. (Germany). Inst. for Theoretical Physics; ETH Zuerich (Switzerland). Inst. for Theoretical Physics; Schierholz, G. [Regensburg Univ. (Germany). Inst. for Theoretical Physics; Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany)

2009-03-15

We extract the form factors relevant for semileptonic decays of D and B mesons from a relativistic computation on a fine lattice in the quenched approximation. The lattice spacing is a=0.04 fm (corresponding to a{sup -1}=4.97 GeV), which allows us to run very close to the physical B meson mass, and to reduce the systematic errors associated with the extrapolation in terms of a heavy quark expansion. For decays of D and D{sub s} mesons, our results for the physical form factors at q{sup 2}=0 are as follows: f{sub +}{sup D{yields}}{sup {pi}}(0)=0.74(6)(4), f{sub +}{sup D{yields}}{sup K}(0)=0.78(5)(4) and f{sub +}{sup D{sub s}{yields}}{sup K}(0)=0.68(4)(3). Similarly, for B and B{sub s} we find: f{sub +}{sup B{yields}}{sup {pi}}(0)=0.27(7)(5), f{sub +}{sup B{yields}}{sup K}(0)=0.32(6)(6) and f{sub +}{sup B{sub s}{yields}}{sup K}(0)=0.23(5)(4). We compare our results with other quenched and unquenched lattice calculations, as well as with lightcone sum rule predictions, finding good agreement. (orig.)

Yield of two mutant lines of soybean for human consumption

International Nuclear Information System (INIS)

Salmeron E, J.; Mastache L, A. A.; Diaz V, G. E.; Valencia E, F.; Ranfla C, R.; Melendez P, M.; Cervantes S, T.; De la Cruz T, E.; Garcia A, J. M.; Falcon B, T.

2009-01-01

The present work has the objective of to evaluate the yield and the agronomic behavior of 2 mutant lines of soybean for human consumption, obtained by means of a process of recurrent irradiation of soybean seed ISAAEG-BM 2 with gammas of Co 60 and selection in the generation R 4 M 18 . For the variable yield significant statistical differences were not observed, but considering the rest of the evaluated agronomic characteristics the mutant lines L 6 and Bombona they were excellent with values of 3,934.6 and 3,806.8 Kg ha- 1 to 15% of grain humidity, they also possess excellent genetic characteristics result of the irradiations and selections of these new genetic materials. (Author)

Yield surface evolution for columnar ice

Science.gov (United States)

Zhou, Zhiwei; Ma, Wei; Zhang, Shujuan; Mu, Yanhu; Zhao, Shunpin; Li, Guoyu

A series of triaxial compression tests, which has capable of measuring the volumetric strain of the sample, were conducted on columnar ice. A new testing approach of probing the experimental yield surface was performed from a single sample in order to investigate yield and hardening behaviors of the columnar ice under complex stress states. Based on the characteristic of the volumetric strain, a new method of defined the multiaxial yield strengths of the columnar ice is proposed. The experimental yield surface remains elliptical shape in the stress space of effective stress versus mean stress. The effect of temperature, loading rate and loading path in the initial yield surface and deformation properties of the columnar ice were also studied. Subsequent yield surfaces of the columnar ice have been explored by using uniaxial and hydrostatic paths. The evolution of the subsequent yield surface exhibits significant path-dependent characteristics. The multiaxial hardening law of the columnar ice was established experimentally. A phenomenological yield criterion was presented for multiaxial yield and hardening behaviors of the columnar ice. The comparisons between the theoretical and measured results indicate that this current model is capable of giving a reasonable prediction for the multiaxial yield and post-yield properties of the columnar ice subjected to different temperature, loading rate and path conditions.

Effects of Methanol Spraying on Qualitative traits, Yield and Yield Components of Soybean (Glycine max L. under Drought Stress Conditions

Directory of Open Access Journals (Sweden)

J Esazadeh Panjali Kharabasi

2017-12-01

spraying. By increasing drought stress, proline content increased, while other traits were decreased and 70 percentage of available soil moisture depletion decreased the seed yield by 51.2%over than the control. With increasing of methanol spraying to 21 of volumetric percentage, all the investigate traits, except the proline content increased and increasing the volumetric percentage methanol more than it, was reduces them. The maximum amounts of quantity traits and stomatal conductance of soybean obtained at 21 volumetric percentage of methanol spraying, and the seed yield of this treatment was 25.6%higher than the control . These results are in agreement with those obtained by Purmousavi et al., (2009, Ruhul Amin et al., (2009, Shahmoradi et al., (2009 and Ibrahim and Kandil, (2007, who found that deficit irrigation, caused a significant decrease in yield and yield components of soybean. In general, irrigation decreasing may be lead to reducing photosynthesis activity and induce imbalanced relations between plant hormones and biological processes in the plant organs as a whole. These conditions in the treated soil are undoubtedly of great importance throughout the vegetative growth and dry matter accumulation in soybean plants. Drought stress reduces leaf size, stem extension and root proliferation; it disturbs plant water relations as well as dry matter production (Farooq et al., 2009. Conclusions In general, the results of experiment showed that the maximum amounts of quantitative traits, stomatal conductance and proline content of soybean, obtained by 21 volumetric percentage of methanol spraying and by this treatment, the seed yield was 25.6 % higher than control.

Impact parameter dependence of the specific entropy and the light particle yield in relativistic heavy ion collisions

International Nuclear Information System (INIS)

Gudima, K.K.; Toneev, V.D.

1986-01-01

The connection between the fragment yield and the associated specific entropy of particles produced in the course of a relativistic heavy ion collision is studied within the cascade approach. The essential impact parameter dependence of the fragment yield indicates that the specific entropy increases with impact parameter and that the critical density of the system decay is the larger the more central the collision process is. The results show that the thermodynamical equilibrium limit for the entropy production is not reached for such heavy systems as Nb+Nb at 400 MeV/nucleon and that the finite size effects and the dynamical freeze-out process are dominant factors in determining the cluster yield

A method for developing a large-scale sediment yield index for European river basins

Energy Technology Data Exchange (ETDEWEB)

Delmas, Magalie; Cerdan, Olivier; Garcin, Manuel [BRGM ARN/ESL, Orleans (France); Mouchel, Jean-Marie [UMR Sisyphe, Univ. P and M Curie, Paris (France)

2009-12-15

Background, aim, and scope: Sediment fluxes within continental areas play a major role in biogeochemical cycles and are often the cause of soil surface degradation as well as water and ecosystem pollution. In a situation where a high proportion of the land surface is experiencing significant global land use and climate changes, it appears important to establish sediment budgets considering the major processes forcing sediment redistribution within drainage areas. In this context, the aim of this study is to test a methodology to estimate a sediment yield index at a large spatial resolution for European river basins. Data and methods: Four indicators representing processes respectively considered as sources (mass movement and hillslope erosion), sinks (deposits), and transfers of sediments (drainage density) are defined using distributed data. Using these indicators we propose a basic conceptual approach to test the possibility of explaining sediment yield observed at the outlet of 29 selected European river basins. We propose an index which adds the two sources and transfers, and subsequently subtracts the sink term. This index is then compared to observed sediment yield data. Results: With this approach, variability between river basins is observed and the evolution of each indicator analyzed. A linear regression shows a correlation coefficient of 0.83 linking observed specific sediment yield (SSY) with the SSY index. Discussion: To improve this approach at this large river basin scale, basin classification is further refined using the relation between the observed SSY and the index obtained from the four indicators. It allows a refinement of the results. Conclusions: This study presents a conceptual approach offering the advantages of using spatially distributed data combined with major sediment redistribution processes to estimate the sediment yield observed at the outlet of river basins. Recommendations and perspectives: Inclusion of better information on

Effect of Integrated Nutrient Management on Yield and Yield ...

African Journals Online (AJOL)

Declining soil fertility is one of the major problems causing yield reduction of barley ... (VC) with inorganic NP on growth, yield and yield components of food barley. ... The experiments were laid out in a randomized complete block design with ...

Statistical Analysis of Large Simulated Yield Datasets for Studying Climate Effects

Science.gov (United States)

Makowski, David; Asseng, Senthold; Ewert, Frank; Bassu, Simona; Durand, Jean-Louis; Martre, Pierre; Adam, Myriam; Aggarwal, Pramod K.; Angulo, Carlos; Baron, Chritian;

Effect of Different Levels of Sulphur Bentonite on Yield and Yield Components of Canola (Brassica napus L.

Directory of Open Access Journals (Sweden)

B Rahimi

2013-04-01

Full Text Available In order to determine the effect of different levels of sulfur bentonite on yield and yield components of canola a factorial experiment was conducted on the basis of randomized complete block design with three replications in Mashhad in 2009-2010 growing season. Factors included four levels of sulfur bentonite (0, 300, 400 and 500 kg.h-1 and two varieties of canola (Modena and Zarfam. The result showed that the increase in sulfur increased some vegetative traits such as leaf area index and plant height. Using sulfur caused increased pod number, seed weight, in addition of oil and protein content and seed yield. Grain yield increase was due to seed weight and LAI. Two varieties were different to responses the sulfur. While in no sulfur application there was no significant difference in seed yield, in 500 Kg sulfur application yield of Zarfam compared to Modena increased about 29.63. According to the results there are significant differences between cultivars in terms of response to the sulfur fertilizer. Therefore it is necessary to evaluate effect of sulfur application of canola productivity in different climate conditions of Iran.

Improving fatty acid methyl ester production yield in a lipase-catalyzed process using waste frying oils as feedstock.

Science.gov (United States)

Azócar, Laura; Ciudad, Gustavo; Heipieper, Hermann J; Muñoz, Robinson; Navia, Rodrigo

2010-06-01

The application of waste frying oil (WFO) mixed with rapeseed oil as a feedstock for the effective production of fatty acid methyl esters (FAME) in a lipase-catalyzed process was investigated. The response surface methodology (RSM) was used to optimize the interaction of four variables: the percentage of WFO in the mixed feedstock, the methanol-to-oil ratio, the dosage of Novozym 435 as a catalyst and the temperature. Furthermore, the addition of methanol to the reaction mixture in a second step after 8 h was shown to effectively diminish enzyme inhibition. Using this technique, the model predicted the optimal conditions that would reach 100% FAME, including a methanol-to-oil molar ratio of 3.8:1, 100% (wt) WFO, 15% (wt) Novozym 435 and incubation at 44.5 degrees C for 12 h with agitation at 200 rpm, and verification experiments confirmed the validity of the model. According to the model, the addition of WFO increased FAME production yield, which is largely due to its higher contents of monoacylglycerols, diacylglycerols and free fatty acids (in comparison to rapeseed oil), which are more available substrates for the enzymatic catalysis. Therefore, the replacement of rapeseed oil with WFO in Novozym 435-catalyzed processes could diminish biodiesel production costs since it is a less expensive feedstock that increases the production yield and could be a potential alternative for FAME production on an industrial scale. (c) 2009 The Society for Biotechnology, Japan. Published by Elsevier B.V. All rights reserved.

Effect of Biofertilizers on the Yield and Yield Components of Black Cumin (Nigella sativa L.

Directory of Open Access Journals (Sweden)

S Khorramdel

2011-02-01

Full Text Available Abstract Application of biological fertilizers is one of the most important methods for plant nutrition in ecological agriculture. In order to investigate the effect of biofertilizers on yield and yield components of black cumin (Nigella sativa L., a field experiment was arranged in a randomized complete block design with three replications during 2007 growing season at the Agricultural Research Station of Ferdowsi University of Mashhad. Treatments included: (A Azotobacter paspali, (B Azospirillum brasilense, (C the fungus of Glomus intraradaices, C+A, C+B, A+B, A+B+C, and control without no biofertilizers. In all treatments except control, the amounts of 15 mg of each biofertilizer were applied to 110 g of seeds. Results indicated that application of biofertilizers enhanced yield and yield components and decreased percentage of hollow capsules. Plant performance was better with application of Azospirillum plus mycorrhiza and a mixture of Azotobacter, Azospirillum and mycorrhiza in terms of yield determining criteria. The maximum and minimum amounts of seed yield were recorded in the B+C treatment with 41.4 gm-2, and control with 24.1 gm-2, respectively. There was no significant correlation between number of capsules per plant and seed yield, but the positive and significant correlation between number of branches per plant, number of seeds per capsule, 1000-seed weight and seed yield was observed. This study showed that application of suitable biofertilizers could increase yield and yield components of black cumin. Keywords: Biofertilizer, Ecological agriculture, Medicinal plants, Plant growth promoting rhizobacteria

Measurement of jets production in association with a Z boson and in the search for the SM Higgs boson via H {yields} {tau}{tau} {yields} ll + 4{nu} with ATLAS

Energy Technology Data Exchange (ETDEWEB)

Psoroulas, Serena

2012-10-15

Three measurements focussing on the understanding of jet final states in ATLAS, in dijet, Z and Higgs boson candidate events, using data corresponding to an integrated luminosity of 35 pb{sup -1} in 2010 and 4.7 fb{sup -1} in 2011, are presented. In the first part, a calibration method, based on the transverse momentum balance in dijet events, is described. The method is used to estimate the uncertainty of the jet energy scale in the forward region. The results show that the parton shower models are limited in reproducing the results in data, mostly for jets of low transverse momentum. In the second part, the differential cross section measurement of the Z{yields}ll+jets process is reported. Phase space regions not been previously studied at other experiments are investigated. The models used for the theory predictions provide a good description of the data, within the relative uncertainties. In the last part, two contribution to the Higgs searches in the H {yields}{tau}{tau} channel are shown: the modelling of the Z{yields}{tau}{tau} background, and the modelling of jet final states. The Z{yields}{tau}{tau} background is derived from data and validated in the H{yields}{tau}{tau}{yields}ll+4{nu} channel. The modelling of jet final states in simulations is in good agreement with the data, when low-energy pile-up effects are subtracted.

Effect of Salinity and Silicon on Seed Yield and Yield Components of Purslane Portulaca oleracea L.(

Directory of Open Access Journals (Sweden)

Z Rahimi

2011-01-01

Full Text Available Abstract In order to study the effects on salinity and silicon application on yield and yield components of purslane (Portulaca oleracea L., an experiment was conducted in a completely randomized desgin with three replications and two factors consisted of four different levels of salinity using NaCl (0, 7, 14, 21dS/m and two levels of silicon (application of one mMol sodium silicate and not application. Increasing salinity concentration significantly caused a negative effect on seed yield. But yield components such as number and weight of seed were more sensitive than number of capsul in main stem in final seed yield. Application of silicon increased seed yield in control but was not significant in salinity levels and leaves and stem biomass. Seed yield and total seed weight in branches was significantly decresed. Weight of 1000 seed in main stem and branches was not significantly different in salinity levels. As a result, purslane could be extremely tolerated to saline conditions, so it seems that it can be cultivated in saline soils and arid regions. Also applied silicon can be increase yield and plant tolerance to environmental stress. Keywords: 1000 seed, Branches, Capsul, Dry weight

Examining the roles that changing harvested areas, closing yield-gaps, and increasing yield ceilings have had on crop production

Science.gov (United States)

Johnston, M.; Ray, D. K.; Mueller, N. D.; Foley, J. A.

2011-12-01

With an increasing and increasingly affluent population, there has been tremendous effort to examine strategies for sustainably increasing agricultural production to meet this surging global demand. Before developing new solutions from scratch, though, we believe it is important to consult our recent agricultural history to see where and how agricultural production changes have already taken place. By utilizing the newly created temporal M3 cropland datasets, we can for the first time examine gridded agricultural yields and area, both spatially and temporally. This research explores the historical drivers of agricultural production changes, from 1965-2005. The results will be presented spatially at the global-level (5-min resolution), as well as at the individual country-level. The primary research components of this study are presented below, including the general methodology utilized in each phase and preliminary results for soybean where available. The complete assessment will cover maize, wheat, rice, soybean, and sugarcane, and will include country-specific analysis for over 200 countries, states, territories and protectorates. Phase 1: The first component of our research isolates changes in agricultural production due to variation in planting decisions (harvested area) from changes in production due to intensification efforts (yield). We examine area/yield changes at the pixel-level over 5-year time-steps to determine how much each component has contributed to overall changes in production. Our results include both spatial patterns of changes in production, as well as spatial maps illustrating to what degree the production change is attributed to area and/or yield. Together, these maps illustrate where, why, and by how much agricultural production has changed over time. Phase 2: In the second phase of our research we attempt to determine the impact that area and yield changes have had on agricultural production at the country-level. We calculate a production

Quantifying potential yield and water-limited yield of summer maize in the North China Plain

Science.gov (United States)

Jiang, Mingnuo; Liu, Chaoshun; Chen, Maosi

2017-09-01

The North China Plain is a major food producing region in China, and climate change could pose a threat to food production in the region. Based on China Meteorological Forcing Dataset, simulating the growth of summer maize in North China Plain from 1979 to 2015 with the regional implementation of crop growth model WOFOST. The results showed that the model can reflect the potential yield and water-limited yield of Summer Maize in North China Plain through the calibration and validation of WOFOST model. After the regional implementation of model, combined with the reanalysis data, the model can better reproduce the regional history of summer maize yield in the North China Plain. The yield gap in Southeastern Beijing, southern Tianjin, southern Hebei province, Northwestern Shandong province is significant, these means the water condition is the main factor to summer maize yield in these regions.

Maximum sustainable yield and species extinction in a prey-predator system: some new results.

Science.gov (United States)

Ghosh, Bapan; Kar, T K

2013-06-01

Though the maximum sustainable yield (MSY) approach has been legally adopted for the management of world fisheries, it does not provide any guarantee against from species extinction in multispecies communities. In the present article, we describe the appropriateness of the MSY policy in a Holling-Tanner prey-predator system with different types of functional responses. It is observed that for both type I and type II functional responses, harvesting of either prey or predator species at the MSY level is a sustainable fishing policy. In the case of combined harvesting, both the species coexist at the maximum sustainable total yield (MSTY) level if the biotic potential of the prey species is greater than a threshold value. Further, increase of the biotic potential beyond the threshold value affects the persistence of the system.

Abstracts, Third Space Processing Symposium, Skylab results

Science.gov (United States)

1974-01-01

Skylab experiments results are reported in abstracts of papers presented at the Third Space Processing Symposium. Specific areas of interest include: exothermic brazing, metals melting, crystals, reinforced composites, glasses, eutectics; physics of the low-g processes; electrophoresis, heat flow, and convection demonstrations flown on Apollo missions; and apparatus for containerless processing, heating, cooling, and containing materials.

Equity yields

NARCIS (Netherlands)

Vrugt, E.; van Binsbergen, J.H.; Koijen, R.S.J.; Hueskes, W.

2013-01-01

We study a new data set of dividend futures with maturities up to ten years across three world regions: the US, Europe, and Japan. We use these asset prices to construct equity yields, analogous to bond yields. We decompose the equity yields to obtain a term structure of expected dividend growth

Time of harvest affects the yield of soluble polysaccharides extracted enzymatically from potato pulp

DEFF Research Database (Denmark)

Ravn, Helle Christine; Sørensen, Ole Bandsholm; Meyer, Anne S.

2015-01-01

properties as bifidogenic prebiotic fibers. The potato starch processing campaign is based on processing of fresh potatoes (in Denmark the campaign lasts from September to December). This study examines the effect of time of harvest and processing during the campaign on the yield of enzymatically solubilized...... fibers; this outcome may be the result of an inherent effect of the higher maturity of the potatoes late in the campaign....

Microstructure and nonlinear signatures of yielding in a heterogeneous colloidal gel under large amplitude oscillatory shear

Energy Technology Data Exchange (ETDEWEB)

Kim, Juntae; Helgeson, Matthew E., E-mail: helgeson@engineering.ucsb.edu [Department of Chemical Engineering, University of California Santa Barbara, Santa Barbara, California 93106 (United States); Merger, Dimitri; Wilhelm, Manfred [Institute for Chemical Technology and Polymer Chemistry, Karlsruhe Institute of Technology, 76131 Karlsruhe (Germany)

2014-09-01

We investigate yielding in a colloidal gel that forms a heterogeneous structure, consisting of a two-phase bicontinuous network of colloid-rich domains of fractal clusters and colloid-poor domains. Combining large amplitude oscillatory shear measurements with simultaneous small and ultra-small angle neutron scattering (rheo-SANS/USANS), we characterize both the nonlinear mechanical processes and strain amplitude-dependent microstructure underlying yielding. We observe a broad, three-stage yielding process that evolves over an order of magnitude in strain amplitude between the onset of nonlinearity and flow. Analyzing the intracycle response as a sequence of physical processes reveals a transition from elastic straining to elastoplastic thinning (which dominates in region I) and eventually yielding (which evolves through region II) and flow (which saturates in region III), and allows quantification of instantaneous nonlinear parameters associated with yielding. These measures exhibit significant strain rate amplitude dependence above a characteristic frequency, which we argue is governed by poroelastic effects. Correlating these results with time-averaged rheo-USANS measurements reveals that the material passes through a cascade of structural breakdown from large to progressively smaller length scales. In region I, compression of the fractal domains leads to the formation of large voids. In regions II and III, cluster-cluster correlations become increasingly homogeneous, suggesting breakage and eventually depercolation of intercluster bonds at the yield point. All significant structural changes occur on the micron-scale, suggesting that large-scale rearrangements of hundreds or thousands of particles, rather than the homogeneous rearrangement of particle-particle bonds, dominate the initial yielding of heterogeneous colloidal gels.

Measure of the e+e-{yields}bb Cross Section at the LEP Energies; Medida de la seccion eficaz e''+e''-{yields}bb a las Energias de LEP

Energy Technology Data Exchange (ETDEWEB)

Arce Dubois, P

1992-07-01

In the present work I analyse the data collected during 1990 by the L3 detector, situated in the electron-positron collider LEP. After selecting the events e''+e''-{yields} bb through their semileptonic decays into muons, I calculate the cross section for the process e''+e''- {yields} bb at different energy points around the mass of the vectorial boson Z, and I measure some parameters of the Standard Model, namely, the Br(b{yields}{mu} ),{gamma}{sub z}n-{yields}bb/{gamma}{sub z}n{yields}had and {gamma}{sub z}n{yields}bb{gamma}{sub z}n{yields}e''+e''-. (Author) 26 refs.

Live performance and processing yields of broilers fed diets with tiamulin and salinomycin combinations

Directory of Open Access Journals (Sweden)

SL Vieira

2010-03-01

Full Text Available A study was conducted with the objective of evaluating the combined application of tiamulin (TIA and salinomycin (SAL in broiler diets fed from 1 to 42 d of age. One thousand and two hundred Cobb x Cobb 500 male broilers were housed in 48 floor pens and fed corn-soybean meal diets containing 66 ppm of SAL combined or not with TIA at 30 or 20 and 20 or 15 ppm, respectively, in the starter (1-21 d and grower feeds (22-42 d; however, TIA was withdrawn from the feeds 7 days before slaughter. The experimental design was completely randomized with 3 treatments and 16 replicates of 25 birds each. Broilers were weekly evaluated for live performance whereas carcass yield, abdominal fat and commercial cuts were assessed at 42 d using 6 birds randomly taken from each pen. Results obtained at the end of the study demonstrated that body weight gain was not affected (P > 0.05 by the treatments, whereas feed intake was reduced (P 0.05 by the treatments. Live performance and post-slaughter yields data obtained in this study did not indicate that combinations of TIA with SAL could be detrimental. In fact, an improvement in feed conversion was observed at the lowest dose of TIA.

Recent changes in county-level corn yield variability in the United States from observations and crop models

Energy Technology Data Exchange (ETDEWEB)

Leng, Guoyong

2017-12-01

The United States is responsible for 35% and 60% of global corn supply and exports. Enhanced supply stability through a reduction in the year-to-year variability of US corn yield would greatly benefit global food security. Important in this regard is to understand how corn yield variability has evolved geographically in the history and how it relates to climatic and non-climatic factors. Results showed that year-to-year variation of US corn yield has decreased significantly during 1980-2010, mainly in Midwest Corn Belt, Nebraska and western arid regions. Despite the country-scale decreasing variability, corn yield variability exhibited an increasing trend in South Dakota, Texas and Southeast growing regions, indicating the importance of considering spatial scales in estimating yield variability. The observed pattern is partly reproduced by process-based crop models, simulating larger areas experiencing increasing variability and underestimating the magnitude of decreasing variability. And 3 out of 11 models even produced a differing sign of change from observations. Hence, statistical model which produces closer agreement with observations is used to explore the contribution of climatic and non-climatic factors to the changes in yield variability. It is found that climate variability dominate the change trends of corn yield variability in the Midwest Corn Belt, while the ability of climate variability in controlling yield variability is low in southeastern and western arid regions. Irrigation has largely reduced the corn yield variability in regions (e.g. Nebraska) where separate estimates of irrigated and rain-fed corn yield exist, demonstrating the importance of non-climatic factors in governing the changes in corn yield variability. The results highlight the distinct spatial patterns of corn yield variability change as well as its influencing factors at the county scale. I also caution the use of process-based crop models, which have substantially underestimated

Search for B {yields} K{ell}{sup +}{ell}{sup -} and B {yields} K*(892){ell}{sup +}{ell}{sup -}

Energy Technology Data Exchange (ETDEWEB)

Aubert, B.

2004-02-12

The authors present preliminary results from a search for the flavor-changing neutral current decays B {yields} K{ell}{sup +}{ell}{sup -} and B {yields} K*(892){ell}{sup +}{ell}{sup -} using a sample of 22.7 x 10{sup 6} {Upsilon}(4S) {yields} B{bar B} decays collected with the BABAR detector at the PEP-II B Factory. They have reconstructed the following final states: B{sup +} {yields} K{sup +}{ell}{sup +}{ell}{sup -}, B{sup 0} {yields} K{sup 0}{ell}{sup +}{ell}{sup -} (K{sub s}{sup 0} {yields} {pi}{sup +} {pi}{sup -}), B{sup +} {yields} K*{sup +}{ell}{sup +}{ell}{sup -} (K*{sup +} {yields} K{sub s}{sup 0}{pi}{sup +}), and B{sup 0} {yields} K*{sup 0}{ell}{sup +}{ell}{sup -} (K*{sup 0} {yields} K{sup +}{pi}{sup -}), where {ell}{sup +}{ell}{sup -} is either an e{sup +}e{sup -} or {mu}{sup +}{mu}{sup -} pair. They obtain the 90% C.L. upper limits {Beta}(B {yields} K{ell}{sup +}{ell}{sup -}) < 0.6 x 10{sup -6} and {Beta}(B {yields} K*{ell}{sup +}{ell}{sup -}) < 2.5 x 10{sup -6}, close to the Standard Model predictions for these branching fractions.

Effect of Different Sources of Nitrogen and Organic Fertilizers on Yield and Yield Components of Ajowan (Trachyspermum ammi L.

Directory of Open Access Journals (Sweden)

zahra saydi

2017-09-01

and grain yield and harvest index were measured during vegetative and maturity stage of plant growth. Results and Discussion The results of the experiment showed that the interaction between different sources of nitrogen and organic fertilizers on plant height, number of umbrella per plant, number of seeds per umbrella, biomass and grain yield were significant. Also most of plant growth characteristics under either no nitrogen or no organic fertilizers were gained the lowest values. On the other hand, it seems that combination of chemical and biological fertilizers can improve plant trait performances in Ajowan. The highest plant height (117.8 cm was measured in the treatments received slow release Urea combined with Vermicompost. The highest seed per umbel (424.3 was observed at the %50 rate of Vermicompost + Humic Acid and without nitrogen fertilizer (control and the biggest amount of 1000 seeds weight (1.14 g was measured at the %50 rate of slow release urea with Alkazotplus + Humic Acid. Also the highest umbel per plant (82.27, biological yield (8507.1 Kg.ha-1 and grain yield (1670 Kg.ha-1 were obtained at Vermicompost + Urea fertilizer and finally the highest harvest index (32% was related to the %50 rate of slow release urea with the highest value Alkazotplus + Vermicompost. Vahidipour et al (2013 showed that the maximum Essential oil yield and the highest grain yield of Ajowan was gained in application of 200 kg N.ha-1. The results of the current study indicated that most of plant trait improvements were induced by combanitaion of vermicompost with urea fertilizer. As a result, in order to gain maximum plant yield under an environmental friendly situation, it is strongly suggested to implement Vermicompost in combination with minimized application of urea fertilizer. This could be an important economic and sustainable approach. Conclusion Totally the results of this research showed that the application of Vermicompost purely and in combination with urea, had a

Sequential Path Analysis for Determination of Relationship Between Yield and Yield Components in Bread Wheat (Triticum aestivum.L.

Directory of Open Access Journals (Sweden)

Mohtasham MOHAMMADI

2014-03-01

Full Text Available An experiment was conducted to evaluate 295 wheat genotypes in Alpha-Lattice design with two replications. The arithmetic mean and standard deviation of grain yield was 2706 and 950 (kg/ha,respectively. The results of correlation coefficients indicated that grain yield had significant and positive association with plant height, spike length, early growth vigor and agronomic score. Whereas there were negative correlation coefficients between grain yield and days to physiological maturity and canopy temperature before and during anthesis. Path analysis indicated agronomic score and plant height had high positive direct effects on grain yield, while canopy temperature before and during anthesis, and days to maturity, wes another trait having negative direct effect on grain yield. The results of sequential path analysis showed the traits that accounted as a criteria variable for high grain yield were agronomic score, plant height, canopy temperature, spike length, chlorophyll content and early growth vigor, which were determined as first, second and third order variables and had strong effects on grain yield via one or more paths. More important, as canopy temperature, agronomic score and early growth vigor can be evaluated quickly and easily, these traits may be used for evaluation of large populations.

3D active edge silicon sensors: Device processing, yield and QA for the ATLAS-IBL production

Energy Technology Data Exchange (ETDEWEB)

Da Vià, Cinzia; Boscardil, Maurizio; Dalla Betta, GianFranco; Darbo, Giovanni; Fleta, Celeste; Gemme, Claudia; Giacomini, Gabriele; Grenier, Philippe; Grinstein, Sebastian; Hansen, Thor-Erik; Hasi, Jasmine; Kenney, Christopher; Kok, Angela; La Rosa, Alessandro; Micelli, Andrea; Parker, Sherwood; Pellegrini, Giulio; Pohl, David-Leon; Povoli, Marco; Vianello, Elisa; Zorzi, Nicola; Watts, S. J.

2013-01-01

3D silicon sensors, where plasma micromachining is used to etch deep narrow apertures in the silicon substrate to form electrodes of PIN junctions, were successfully manufactured in facilities in Europe and USA. In 2011 the technology underwent a qualification process to establish its maturity for a medium scale production for the construction of a pixel layer for vertex detection, the Insertable B-Layer (IBL) at the CERN-LHC ATLAS experiment. The IBL collaboration, following that recommendation from the review panel, decided to complete the production of planar and 3D sensors and endorsed the proposal to build enough modules for a mixed IBL sensor scenario where 25% of 3D modules populate the forward and backward part of each stave. The production of planar sensors will also allow coverage of 100% of the IBL, in case that option was required. This paper will describe the processing strategy which allowed successful 3D sensor production, some of the Quality Assurance (QA) tests performed during the pre-production phase and the production yield to date.

3D active edge silicon sensors: Device processing, yield and QA for the ATLAS-IBL production

Energy Technology Data Exchange (ETDEWEB)

Da Vià, Cinzia, E-mail: cinzia.da.via@cern.ch [School of Physics and Astronomy, The University of Manchester, Oxford Road, M13 9PL Manchester (United Kingdom); Boscardil, Maurizio [Fondazione Bruno Kessler, FBK-CMM, Via Sommarive 18, I-38123 Trento (Italy); Dalla Betta, GianFranco [DISI, Università degli Studi di Trento and INFN, Via Sommarive 14, I-38123 Trento (Italy); Darbo, Giovanni [INFN Sezione di Genova, Via Dodecaneso 33, I-14146 Genova (Italy); Fleta, Celeste [Centro Nacional de Microelectronica, CNM-IMB (CSIC), Barcelona E-08193 (Spain); Gemme, Claudia [INFN Sezione di Genova, Via Dodecaneso 33, I-14146 Genova (Italy); Giacomini, Gabriele [Fondazione Bruno Kessler, FBK-CMM, Via Sommarive 18, I-38123 Trento (Italy); Grenier, Philippe [SLAC National Accelerator Laboratory, 2575 Sand Hill Rd, Menlo Park, CA 94025 (United States); Grinstein, Sebastian [Institut de Fisica d' Altes Energies (IFAE) and ICREA, Universitat Autonoma de Barcelona (UAB) E-08193, Bellaterra, Barcelona (Spain); Hansen, Thor-Erik [SINTEF MiNaLab, Blindern, N-0314 Oslo (Norway); Hasi, Jasmine; Kenney, Christopher [SLAC National Accelerator Laboratory, 2575 Sand Hill Rd, Menlo Park, CA 94025 (United States); Kok, Angela [SINTEF MiNaLab, Blindern, N-0314 Oslo (Norway); La Rosa, Alessandro [CERN CH 1211, Geneva 23 (Switzerland); Micelli, Andrea [Tne University of Udine and INFN, via del Cotonificio 108, 33100 Udine (Italy); Parker, Sherwood [University of Hawaii, c/o Lawrence Berkeley Laboratory, Berkeley, CA 94720 (United States); Pellegrini, Giulio [Centro Nacional de Microelectronica, CNM-IMB (CSIC), Barcelona E-08193 (Spain); Pohl, David-Leon [Physikalisches Institut der Universität Bonn, Nußallee 12 D-53115, Bonn, Federal Republic of Germany (Germany); Povoli, Marco [DISI, Università degli Studi di Trento and INFN, Via Sommarive 14, I-38123 Trento (Italy); and others

2013-01-21

3D silicon sensors, where plasma micromachining is used to etch deep narrow apertures in the silicon substrate to form electrodes of PIN junctions, were successfully manufactured in facilities in Europe and USA. In 2011 the technology underwent a qualification process to establish its maturity for a medium scale production for the construction of a pixel layer for vertex detection, the Insertable B-Layer (IBL) at the CERN-LHC ATLAS experiment. The IBL collaboration, following that recommendation from the review panel, decided to complete the production of planar and 3D sensors and endorsed the proposal to build enough modules for a mixed IBL sensor scenario where 25% of 3D modules populate the forward and backward part of each stave. The production of planar sensors will also allow coverage of 100% of the IBL, in case that option was required. This paper will describe the processing strategy which allowed successful 3D sensor production, some of the Quality Assurance (QA) tests performed during the pre-production phase and the production yield to date.

Effect of crude protein concentration and dietary electrolyte balance on litter quality, foot pad dermatitis, growth performance and processing yields in two medium heavy turkey hybrids.

Science.gov (United States)

Veldkamp, T; Hocking, P M; Vinco, L J

2017-10-01

1. An experiment was conducted to investigate the effect of crude protein (CP) concentration and dietary electrolyte balance (DEB) on growth performance, processing yields, litter quality and foot pad dermatitis (FPD) in male turkeys from two commercial hybrids. Soya bean meal was replaced by vegetable protein sources selected for lower K concentrations to lower DEB in order to improve litter quality and subsequent quality of foot pads. 2. Effects of CP on litter friability and wetness were not consistent during the production period. FPD in turkeys fed on diets with low CP was significantly lower than FPD in turkeys fed on diets with high CP until 84 d. Growth performance was adversely affected at low CP. Processing yields were not affected by CP. 3. Litter was significantly dryer in pens of turkeys fed on diets with low DEB than in pens of turkeys fed on diets with high DEB. FPD in turkeys fed on diets with low DEB was significantly lower than in turkeys fed on diets with high DEB. Growth performance and processing yields were adversely affected at low DEB. 4. FPD in turkey hybrid A was higher than in turkey hybrid B at 28 d of age. Thereafter, no differences in FPD between turkey hybrids were observed. Growth performance and processing yields were not affected by turkey hybrid. 5. Overall, a significant interaction effect of CP × DEB was observed for FCR: in turkeys fed on the high DEB treatment, FCR of turkeys fed on the high CP diets was lower than FCR of turkeys fed on the low CP (LCP) diets whereas on the low DEB treatment, FCR was not affected by CP treatment. 6. It was concluded that litter quality can be improved and FPD may be decreased in turkeys fed on diets containing lower CP and DEB levels.

Path Analysis of Grain Yield and Yield Components and Some Agronomic Traits in Bread Wheat

Directory of Open Access Journals (Sweden)

Mohsen Janmohammadi

2014-01-01

Full Text Available Development of new bread wheat cultivars needs efficient tools to monitor trait association in a breeding program. This investigation was aimed to characterize grain yield components and some agronomic traits related to bread wheat grain yield. The efficiency of a breeding program depends mainly on the direction of the correlation between different traits and the relative importance of each component involved in contributing to grain yield. Correlation and path analysis were carried out in 56 bread wheat genotypes grown under field conditions of Maragheh, Iran. Observations were recorded on 18 wheat traits and correlation coefficient analysis revealed grain yield was positively correlated with stem diameter, spike length, floret number, spikelet number, grain diameter, grain length and 1000 seed weight traits. According to the variance inflation factor (VIF and tolerance as multicollinearity statistics, there are inconsistent relationships among the variables and all traits could be considered as first-order variables (Model I with grain yield as the response variable due to low multicollinearity of all measured traits. In the path coefficient analysis, grain yield represented the dependent variable and the spikelet number and 1000 seed weight traits were the independent ones. Our results indicated that the number of spikelets per spikes and leaf width and 1000 seed weight traits followed by the grain length, grain diameter and grain number per spike were the traits related to higher grain yield. The above mentioned traits along with their indirect causal factors should be considered simultaneously as an effective selection criteria evolving high yielding genotype because of their direct positive contribution to grain yield.

Estimation of Rice Crop Yields Using Random Forests in Taiwan

Science.gov (United States)

Chen, C. F.; Lin, H. S.; Nguyen, S. T.; Chen, C. R.

2017-12-01

Rice is globally one of the most important food crops, directly feeding more people than any other crops. Rice is not only the most important commodity, but also plays a critical role in the economy of Taiwan because it provides employment and income for large rural populations. The rice harvested area and production are thus monitored yearly due to the government's initiatives. Agronomic planners need such information for more precise assessment of food production to tackle issues of national food security and policymaking. This study aimed to develop a machine-learning approach using physical parameters to estimate rice crop yields in Taiwan. We processed the data for 2014 cropping seasons, following three main steps: (1) data pre-processing to construct input layers, including soil types and weather parameters (e.g., maxima and minima air temperature, precipitation, and solar radiation) obtained from meteorological stations across the country; (2) crop yield estimation using the random forests owing to its merits as it can process thousands of variables, estimate missing data, maintain the accuracy level when a large proportion of the data is missing, overcome most of over-fitting problems, and run fast and efficiently when handling large datasets; and (3) error verification. To execute the model, we separated the datasets into two groups of pixels: group-1 (70% of pixels) for training the model and group-2 (30% of pixels) for testing the model. Once the model is trained to produce small and stable out-of-bag error (i.e., the mean squared error between predicted and actual values), it can be used for estimating rice yields of cropping seasons. The results obtained from the random forests-based regression were compared with the actual yield statistics indicated the values of root mean square error (RMSE) and mean absolute error (MAE) achieved for the first rice crop were respectively 6.2% and 2.7%, while those for the second rice crop were 5.3% and 2

The effect of biological fertilizers on yield, yield components and seed oil contents of three cultivars of canola (Brassica napus L.

Directory of Open Access Journals (Sweden)

A Koocheki

2016-05-01

percentage of essential oil was obtained from Nitroxin, vermicompost and combination of Nitroxin+Biophosphor+Biosulfur. A positive and strong correlation was observed between dry mater yield and flowering shoot yield and stem yield, respectively. Conclusion The results indicated that application of organic and inoculation of biological fertilizers have positive effects on improvement of qualitative and quantitative traits of summer savory, so it could be considered as an alternative method for healthy production of summer savory. Acknowledgements The expenses for this research were funded by the Research and Technology Deputy of the Ferdowsi University of Mashhad, Faculty of agriculture. The financial support is appreciated. References Chen, J. 2006. The combined use of chemical and organic fertilizers and/or biofertilizer for crop growth and soil fertility. International Workshop on Sustained Management of the Soil-Rhizosphere System for Efficient Crop Production and Fertilizer Use. October 16-20. Thailand. 11 pp. Gliessman, S.R. 1998. Agroecology: Ecological Processes in Sustainable Agriculture. CRC Press. ISBN: 1-57504-043-3 Mahfouz, S.A., Sharaf- Eldin, A. 2007. Effect of mineral vs. biofertilizer on growth, yield, and essential oil content of fennel (Foeniculum vulgare Mill.. Agrophysics Journal 21: 361-366. Omidbeigi, R. 2000. Approaches to Production and Processing of Medicinal plants, vol. (3. Beh Nashr Publisher, Mashhad. (In Persian Vessey, J.K. 2003. Plant growth promoting rhizobacteria as biofertilizers. Plant and Soil 255: 571-586.

Preliminary Evaluation of Yield and Yield Components of Some Khorasanian Sesame Ecotypes (Sesamum indicum L.

Directory of Open Access Journals (Sweden)

A. Nezami

2014-09-01

Full Text Available In most region of Khorasan, sesame ecotypes have been planted for many years, but there is little information about seed yield and yield components of them. Therefore a field experimental was conducted to investigation of yield parameters of 14 sesame ecotypes (MSC1, MSC2, MSC3, MSC4, MSC5, MSC6, MSC7, MSC8, MSC9, MSC10, MSC11, MSC12, MSC13 and MSC14 in randomized complete block design with three replications at experimental station, Collage of Agriculture, Ferdowsi University of Mashhad during 2009. Results showed that there were significant difference (P

Suitability of the Yield Criterion in Numerical Simulation of Stretch Bending of Aluminum Extrusions

International Nuclear Information System (INIS)

Li, X.Q.; Zhou, X.B.; Wu, X.D.; Gao, H.Z.

2005-01-01

Stretch bending is commonly used to shape thin-walled extrusions in aerospace and automotive industries. The extrusions are pre-stretched and bent over rigid curved dies. Effective application of this process demands sufficient knowledge of how different parameters influence the final shape of the product. Numerical simulation is an effective approach to investigate these issues presently. However, the validity of simulation result depends strongly on a precise description of the mechanical behavior of the material. Due to crystallographic texture caused by the extrusion process, aluminium extrusions exhibit significant plastic anisotropy which need be described by advanced constitutive model. In this work stretch bending of aluminum extrusions is simulated by using different anisotropic criteria (Hill quadratic, Barlat three-parameter). The influence of two yield criteria on predicting maximum die force immediately before unloading, permanent sagging and vertical springback displacement in the middle section of extrusion are compared. Maximum die force and springback calculated by two yield criteria are found to be almost same. Permanent sagging is obviously underestimated by two yield criteria, however, prediction by Barlat three-parameter is closer to experiment than one of Hill quadratic yield criterion

Prediction of the Dynamic Yield Strength of Metals Using Two Structural-Temporal Parameters

Science.gov (United States)

Selyutina, N. S.; Petrov, Yu. V.

2018-02-01

The behavior of the yield strength of steel and a number of aluminum alloys is investigated in a wide range of strain rates, based on the incubation time criterion of yield and the empirical models of Johnson-Cook and Cowper-Symonds. In this paper, expressions for the parameters of the empirical models are derived through the characteristics of the incubation time criterion; a satisfactory agreement of these data and experimental results is obtained. The parameters of the empirical models can depend on some strain rate. The independence of the characteristics of the incubation time criterion of yield from the loading history and their connection with the structural and temporal features of the plastic deformation process give advantage of the approach based on the concept of incubation time with respect to empirical models and an effective and convenient equation for determining the yield strength in a wider range of strain rates.

Quantitative Genetic Analysis for Yield and Yield Components in Boro Rice (Oryza sativa L.

Directory of Open Access Journals (Sweden)

Supriyo CHAKRABORTY

2010-03-01

Full Text Available Twenty-nine genotypes of boro rice (Oryza sativa L. were grown in a randomized block design with three replications in plots of 4m x 1m with a crop geometry of 20 cm x 20 cm between November-April, in Regional Agricultural Research Station, Nagaon, India. Quantitative data were collected on five randomly selected plants of each genotype per replication for yield/plant, and six other yield components, namely plant height, panicles/plant, panicle length, effective grains/panicle, 100 grain weight and harvest index. Mean values of the characters for each genotype were used for analysis of variance and covariance to obtain information on genotypic and phenotypic correlation along with coheritability between two characters. Path analyses were carried out to estimate the direct and indirect effects of boro rice�s yield components. The objective of the study was to identify the characters that mostly influence the yield for increasing boro rice productivity through breeding program. Correlation analysis revealed significant positive genotypic correlation of yield/plant with plant height (0.21, panicles/plant (0.53, panicle length (0.53, effective grains/panicle (0.57 and harvest index (0.86. Path analysis based on genotypic correlation coefficients elucidated high positive direct effect of harvest index (0.8631, panicle length (0.2560 and 100 grain weight (0.1632 on yield/plant with a residual effect of 0.33. Plant height and panicles/plant recorded high positive indirect effect on yield/plant via harvest index whereas effective grains/panicle on yield/plant via harvest index and panicle length. Results of the present study suggested that five component characters, namely harvest index, effective grains/plant, panicle length, panicles/plant and plant height influenced the yield of boro rice. A genotype with higher magnitude of these component characters could be either selected from the existing genotypes or evolved by breeding program for genetic

Precision measurement of the ratio BR(K{sub S{yields}{pi}}{sup +{pi}-}e{sup +}e{sup -})/BR(K{sub L{yields}{pi}}{sup +{pi}-{pi}}{sub D}{sup 0})

Energy Technology Data Exchange (ETDEWEB)

Batley, J.R. [Cavendish Laboratory, University of Cambridge, Cambridge, CB3 0HE (United Kingdom); Kalmus, G.E. [Cavendish Laboratory, University of Cambridge, Cambridge, CB3 0HE (United Kingdom); Rutherford Appleton Laboratory, Chilton, Didcot, OX11 0QX (United Kingdom); Lazzeroni, C. [Cavendish Laboratory, University of Cambridge, Cambridge, CB3 0HE (United Kingdom); School of Physics and Astronomy, University of Birmingham, Birmingham B15 2TT (United Kingdom); Munday, D.J. [Cavendish Laboratory, University of Cambridge, Cambridge, CB3 0HE (United Kingdom); Patel, M. [Cavendish Laboratory, University of Cambridge, Cambridge, CB3 0HE (United Kingdom); Imperial College London, Blackett Laboratory, Physics Department, Prince Consort Road, London SW7 2AZ (United Kingdom); Slater, M.W. [Cavendish Laboratory, University of Cambridge, Cambridge, CB3 0HE (United Kingdom); School of Physics and Astronomy, University of Birmingham, Birmingham B15 2TT (United Kingdom); Wotton, S.A. [Cavendish Laboratory, University of Cambridge, Cambridge, CB3 0HE (United Kingdom); Arcidiacono, R. [CERN, CH-1211 Geneve 23 (Switzerland); Sezione dell' INFN di Torino, I-10125 Torino (Italy); Dipartimento di Fisica Sperimentale dell' Universita, I-10125 Torino (Italy); Bocquet, G.; Ceccucci, A. [CERN, CH-1211 Geneve 23 (Switzerland); Cundy, D. [CERN, CH-1211 Geneve 23 (Switzerland); Istituto di Cosmogeofisica del CNR di Torino, I-10133 Torino (Italy); Doble, N. [CERN, CH-1211 Geneve 23 (Switzerland); Sezione dell' INFN di Pisa, I-56100 Pisa (Italy); Dipartimento di Fisica dell' Universita, I-56100 Pisa (Italy); Falaleev, V.; Gatignon, L.; Gonidec, A.; Grafstroem, P.; Kubischta, W. [CERN, CH-1211 Geneve 23 (Switzerland); Marchetto, F. [CERN, CH-1211 Geneve 23 (Switzerland); Sezione dell' INFN di Torino, I-10125 Torino (Italy); Mikulec, I. [CERN, CH-1211 Geneve 23 (Switzerland); Osterreichische Akademie der Wissenschaften, Institut fuer Hochenergiephysik, A-10560 Wien (Austria)

2011-01-03

The K{sub S{yields}{pi}}{sup +{pi}-}e{sup +}e{sup -} decay mode was investigated using the data collected in 2002 by the NA48/1 Collaboration. With about 23 k K{sub S{yields}{pi}}{sup +{pi}-}e{sup +}e{sup -} events and 59 k K{sub L{yields}{pi}}{sup +{pi}-{pi}}{sub D}{sup 0} normalization decays, the K{sub S{yields}{pi}}{sup +{pi}-}e{sup +}e{sup -} branching ratio relative to the K{sub L{yields}{pi}}{sup +{pi}-{pi}}{sub D}{sup 0} one was determined to be BR(K{sub S{yields}{pi}}{sup +{pi}-}e{sup +}e{sup -})/BR(K{sub L{yields}{pi}}{sup +{pi}-{pi}}{sub D}{sup 0})=(3.28{+-}0.06{sub stat{+-}}0.04{sub syst})x10{sup -2}. This result was used to set the upper limit |g{sub E1}/g{sub BR}|<3.0 at 90% CL on the presence, in the decay amplitude, of an E1 direct emission (g{sub E1}) term relative to the dominant inner bremsstrahlung (g{sub BR}) term. The CP-violating asymmetry A{sub {phi}} in the sin{phi}cos{phi} distribution of K{sub S{yields}{pi}}{sup +{pi}-}e{sup +}e{sup -} events, where {phi} is the angle between the {pi}{sup +{pi}-} and the e{sup +}e{sup -} decay planes in the kaon centre of mass, was found to be A{sub {phi}=}(-0.4{+-}0.8)%, consistent with zero. These results are in good agreement with a description of the K{sub S{yields}{pi}}{sup +{pi}-}e{sup +}e{sup -} decay amplitude dominated by the CP-even inner bremsstrahlung process.

Improved sugar yields from biomass sorghum feedstocks: comparing low-lignin mutants and pretreatment chemistries.

Science.gov (United States)

Godin, Bruno; Nagle, Nick; Sattler, Scott; Agneessens, Richard; Delcarte, Jérôme; Wolfrum, Edward

2016-01-01

For biofuel production processes to be economically efficient, it is essential to maximize the production of monomeric carbohydrates from the structural carbohydrates of feedstocks. One strategy for maximizing carbohydrate production is to identify less recalcitrant feedstock cultivars by performing some type of experimental screening on a large and diverse set of candidate materials, or by identifying genetic modifications (random or directed mutations or transgenic plants) that provide decreased recalcitrance. Economic efficiency can also be increased using additional pretreatment processes such as deacetylation, which uses dilute NaOH to remove the acetyl groups of hemicellulose prior to dilute acid pretreatment. In this work, we used a laboratory-scale screening tool that mimics relevant thermochemical pretreatment conditions to compare the total sugar yield of three near-isogenic brown midrib ( bmr ) mutant lines and the wild-type (WT) sorghum cultivar. We then compared results obtained from the laboratory-scale screening pretreatment assay to a large-scale pretreatment system. After pretreatment and enzymatic hydrolysis, the bmr mutants had higher total sugar yields than the WT sorghum cultivar. Increased pretreatment temperatures increased reactivity for all sorghum samples reducing the differences observed at lower reaction temperatures. Deacetylation prior to dilute acid pretreatment increased the total sugar yield for all four sorghum samples, and reduced the differences in total sugar yields among them, but solubilized a sizable fraction of the non-structural carbohydrates. The general trends of increased total sugar yield in the bmr mutant compared to the WT seen at the laboratory scale were observed at the large-scale system. However, in the larger reactor system, the measured total sugar yields were lower and the difference in total sugar yield between the WT and bmr sorghum was larger. Sorghum bmr mutants, which have a reduced lignin content showed

Historical effects of temperature and precipitation on California crop yields

Energy Technology Data Exchange (ETDEWEB)

Lobell, D.B. [Energy and Environment Directorate, Lawrence Livermore National Laboratory, Livermore, CA 94550 (United States); Cahill, K.N. [Interdisciplinary Graduate Program in Environment and Resources, Stanford University, Stanford, CA 94305 (United States); Field, C.B. [Department of Global Ecology, Carnegie Institution, Stanford, CA 94305 (United States)

2007-03-15

For the 1980-2003 period, we analyzed the relationship between crop yield and three climatic variables (minimum temperature, maximum temperature, and precipitation) for 12 major Californian crops: wine grapes, lettuce, almonds, strawberries, table grapes, hay, oranges, cotton, tomatoes, walnuts, avocados, and pistachios. The months and climatic variables of greatest importance to each crop were used to develop regressions relating yield to climatic conditions. For most crops, fairly simple equations using only 2-3 variables explained more than two-thirds of observed yield variance. The types of variables and months identified suggest that relatively poorly understood processes such as crop infection, pollination, and dormancy may be important mechanisms by which climate influences crop yield. Recent climatic trends have had mixed effects on crop yields, with orange and walnut yields aided, avocado yields hurt, and most crops little affected by recent climatic trends. Yield-climate relationships can provide a foundation for forecasting crop production within a year and for projecting the impact of future climate changes.

Changing forest water yields in response to climate warming: results from long-term experimental watershed sites across North America

Science.gov (United States)

Irena F. Creed; Adam T. Spargo; Julia A. Jones; Jim M. Buttle; Mary B. Adams; Fred D. Beall; Eric G. Booth; John L. Campbell; Dave Clow; Kelly Elder; Mark B. Green; Nancy B. Grimm; Chelcy Miniat; Patricia Ramlal; Amartya Saha; Stephen Sebestyen; Dave Spittlehouse; Shannon Sterling; Mark W. Williams; Rita Winkler; Huaxia. Yao

2014-01-01

Climate warming is projected to affect forest water yields but the effects are expected to vary.We investigated how forest type and age affect water yield resilience to climate warming. To answer this question, we examined the variability in historical water yields at long-term experimental catchments across Canada and the United States over 5-year cool and warm...

Climatic and technological ceilings for Chinese rice stagnation based on yield gaps and yield trend pattern analysis.

Science.gov (United States)

Zhang, Tianyi; Yang, Xiaoguang; Wang, Hesong; Li, Yong; Ye, Qing

2014-04-01

Climatic or technological ceilings could cause yield stagnation. Thus, identifying the principal reasons for yield stagnation within the context of the local climate and socio-economic conditions are essential for informing regional agricultural policies. In this study, we identified the climatic and technological ceilings for seven rice-production regions in China based on yield gaps and on a yield trend pattern analysis for the period 1980-2010. The results indicate that 54.9% of the counties sampled experienced yield stagnation since the 1980. The potential yield ceilings in northern and eastern China decreased to a greater extent than in other regions due to the accompanying climate effects of increases in temperature and decreases in radiation. This may be associated with yield stagnation and halt occurring in approximately 49.8-57.0% of the sampled counties in these areas. South-western China exhibited a promising scope for yield improvement, showing the greatest yield gap (30.6%), whereas the yields were stagnant in 58.4% of the sampled counties. This finding suggests that efforts to overcome the technological ceiling must be given priority so that the available exploitable yield gap can be achieved. North-eastern China, however, represents a noteworthy exception. In the north-central area of this region, climate change has increased the yield potential ceiling, and this increase has been accompanied by the most rapid increase in actual yield: 1.02 ton ha(-1) per decade. Therefore, north-eastern China shows a great potential for rice production, which is favoured by the current climate conditions and available technology level. Additional environmentally friendly economic incentives might be considered in this region. © 2013 John Wiley & Sons Ltd.

Effects of commercial organic fertilizers on the yield and yield structure of potato cultivars

Directory of Open Access Journals (Sweden)

Filipović Vladimir

2012-01-01

Full Text Available The research work has dealt with investigations of two type commercial organic fertilizers (DCM ECO-MIX 4 NPK 7:7:10 i GUANITO NPK 6:15:3 effects on the yield and yield structure of three potato cultivars (Cleopatra, Carrera and Sylvana. The control variant was used in plots without the use of organic fertilizers. The field experiment was performed in 2012. in a populated area Dobrica (N 45° 13’, E 20° 51’, 78 m.s.l. at the experimental farm plot Belča on which is certified organic production, on anthropogenic soil subtype chernozem on carbonate terrace. The results of research showed that the lowest tuber yield was determined in the control treatment (20,87 t ha-1, while the highest yield was achieved with a commercial organic fertilizer DCM ECO-MIX 4 (23,96 t ha-1. Number of tubers per plant corresponded to the characteristics of the studied cultivars. The largest number of tubers per plant was correlated with yield. Specifically, individual variants of the two greatest yields had the highest average number of tubers per plant. Cultivar Cleopatra of variant with GUANITO achieved 17,51 tubers per plant, while cultivar Sylvana of variant with DCM ECO-MIX 4 achieved 17,38 tubers per plant.

Yield Mapping in Salix; Skoerdekartering av salix

Energy Technology Data Exchange (ETDEWEB)

Anderson, Christoffer; Gilbertsson, Mikael; Rogstrand, Gustav; Thylen, Lars

2004-09-01

The most common species for energy forest production is willow. Willow is able to produce a large amount of biomass in a short period of time. Growing willow has a potential to render a good financial result for the farmer if cultivated on fields with the right conditions and plenty of water. Under the right conditions growing willow can give the farmer a net income of 3,000 SEK (about 430 USD) per hectare and year, which is something that common cereal crops cannot compete with. However, this is not the common case since willow is often grown as a substitute crop on fields where cereal crop yield is low. The aim of this study was to reveal if it is possible to measure yield variability in willow, and if it is possible to describe the reasons for yield variation both within the field but also between different fields. Yield mapping has been used in conventional farming for about a decade. The principles for yield mapping are to continuously measure the yield while registering location by the use of GPS when harvesting the field. The collected data is then used to search for spatial variations within the field, and to try to understand the reasons for this variation. Since there is currently no commercial equipment for yield mapping in willow, a yield mapping system had to be developed within this project. The new system was installed on a Claas Jaguar harvester. The principle for yield mapping on the Claas Jaguar harvester is to measure the distance between the feeding rollers. This distance is correlated to the flow through the harvester. The speed and position of the machine was registered using GPS. Knowing the working width of the harvester this information was used to calculate the yield. All collected data was stored on a PDA computer. Soil samples were also collected from the yield mapped fields. This was to be able to test yield against both physical and chemical soil parameters. The result shows that it is possible to measure spatial variations of yield in

Improving yield of PZT piezoelectric devices on glass substrates

Science.gov (United States)

Johnson-Wilke, Raegan L.; Wilke, Rudeger H. T.; Cotroneo, Vincenzo; Davis, William N.; Reid, Paul B.; Schwartz, Daniel A.; Trolier-McKinstry, Susan

2012-10-01

The proposed SMART-X telescope includes adaptive optics systems that use piezoelectric lead zirconate titanate (PZT) films deposited on flexible glass substrates. Several processing constraints are imposed by current designs: the crystallization temperature must be kept below 550 °C, the total stress in the film must be minimized, and the yield on 1 cm2 actuator elements should be work, RF magnetron sputtering was used to deposit films since chemical solution deposition (CSD) led to warping of large area flexible glass substrates. A PZT 52/48 film that wasdeposited at 4 mTorr and annealed at 550 °C for 24 hours showed no detectable levels of either PbO or pyrochlore second phases. Large area electrodes (1cm x 1 cm) were deposited on 4" glass substrates. Initially, the yield of the devices was low, however, two methods were employed to increase the yield to near 100 %. The first method included a more rigorous cleaning to improve the continuity of the Pt bottom electrode. The second method was to apply 3 V DC across the capacitor structure to burn out regions of defective PZT. The result of this latter method essentially removed conducting filaments in the PZT but left the bulk of the material undamaged. By combining these two methods, the yield on the large area electrodes improved from < 10% to nearly 100%.

Systematic features of mass yield curves in low-energy fission of actinides

International Nuclear Information System (INIS)

Nagame, Yuichiro

1999-01-01

Characteristics of mass yield curves in fission of wide range of nuclides from pre-actinides through transactinides are reviewed and the following points are discussed. (1) Systematic trends of the mass yield distributions in low-energy proton-induced fission of actinides and in spontaneous fission of actinides are discussed in terms of weighted mean mass numbers of the light and heavy asymmetric mass yield peaks and widths of the heavy asymmetric mass yields. (2) Gross features of the two kinds of mass yield curves, symmetric and asymmetric ones, as a function of a fissioning nucleus. (3) Competition between the symmetric and asymmetric fission as a function of not only Z (proton number) but also N (neutron number) of a fissioning nucleus. (4) Experimental verification of the existence of two kinds of deformation paths in low energy fission of actinides; the first path is initiated at higher threshold energy and ends with elongated scission configuration, giving a final mass yield distribution centered around the symmetric mass division, 'symmetric fission path'. In the second path, a fissioning nucleus experiences lower threshold energy and results in more compact scission configuration, which gives a double humped mass distribution always centered around A=140 for the heavier fragment, 'asymmetric fission path'. (5) Interpretation of the 'bimodal fission' observed in the spontaneous fission of heavy actinides as the presence of the two fission paths of the ordinary asymmetric one and a strongly shell-affected symmetric path from the systematic analysis of scission configurations. (6) A dynamical fission process deduced from the analysis of the experimental mass yield curves and the correlation data of neutron multiplicity and fragment mass and total kinetic energy. (7) Prediction of the characteristics of gross properties of fission in superheavy nuclei around 280 114. (8) Characteristics of highly asymmetric fission: formation cross section as a function of

Statistical rice yield modeling using blended MODIS-Landsat based crop phenology metrics in Taiwan

Science.gov (United States)

Chen, C. R.; Chen, C. F.; Nguyen, S. T.; Lau, K. V.

2015-12-01

Taiwan is a populated island with a majority of residents settled in the western plains where soils are suitable for rice cultivation. Rice is not only the most important commodity, but also plays a critical role for agricultural and food marketing. Information of rice production is thus important for policymakers to devise timely plans for ensuring sustainably socioeconomic development. Because rice fields in Taiwan are generally small and yet crop monitoring requires information of crop phenology associating with the spatiotemporal resolution of satellite data, this study used Landsat-MODIS fusion data for rice yield modeling in Taiwan. We processed the data for the first crop (Feb-Mar to Jun-Jul) and the second (Aug-Sep to Nov-Dec) in 2014 through five main steps: (1) data pre-processing to account for geometric and radiometric errors of Landsat data, (2) Landsat-MODIS data fusion using using the spatial-temporal adaptive reflectance fusion model, (3) construction of the smooth time-series enhanced vegetation index 2 (EVI2), (4) rice yield modeling using EVI2-based crop phenology metrics, and (5) error verification. The fusion results by a comparison bewteen EVI2 derived from the fusion image and that from the reference Landsat image indicated close agreement between the two datasets (R2 > 0.8). We analysed smooth EVI2 curves to extract phenology metrics or phenological variables for establishment of rice yield models. The results indicated that the established yield models significantly explained more than 70% variability in the data (p-value 0.8), in both cases. The root mean square error (RMSE) and mean absolute error (MAE) used to measure the model accuracy revealed the consistency between the estimated yields and the government's yield statistics. This study demonstrates advantages of using EVI2-based phenology metrics (derived from Landsat-MODIS fusion data) for rice yield estimation in Taiwan prior to the harvest period.

Neutron yields from bombardment of α-particles

International Nuclear Information System (INIS)

Nakasima, Ryuzo

1982-09-01

The thick target neutron yields from bombardment of <10 MeV α-particles are calculated based on the reaction cross sections. The results for the elements of Z < 15 are compared with existing calculated or measured neutron yield data. For the elements of 16 < Z < 50, elemental or isotopic neutron yields are calculated if the cross section data are available. (author)

Increasing the biogas yield of manure by wet explosion of the digested fiber fraction

DEFF Research Database (Denmark)

Biswas, Rajib; Uellendahl, Hinrich; Ahring, Birgitte Kiær

digested manure fibers from the effluent of an anaerobic digester for enhancing biogas production and exploring the untapped biomass potential. The increase in methane yield of the digested manure fibers was investigated by applying the WEx treatment under 5 different process conditions. The pretreatment......Increasing the biodegradability of the lignocellulosic fiber fraction of manure can ensure higher methane productivity in biogas plants, leading to process profitability and thus larger production of renewable energy. A new pretreatment method, wet explosion (WEx), was investigated to treat...... condition of 180 ºC and a retention time of 10 minutes without addition of chemicals was found to be optimal, resulting in 136% increase in methane yield as compared to the untreated digested manure fibers....

Effects of Sowing Date and Limited Irrigation on Yield and Yield Components of Five Rainfed Wheat Varieties in Maragheh Region

Directory of Open Access Journals (Sweden)

A. R. Tavakkoli

2013-03-01

Full Text Available In order to investigate the effects of sowing date (SD and single irrigation (SI amounts on yield and yield components of rainfed wheat varieties, a field experiment was conducted as split-split plots arranged in a randomized complete blocks design with three replications during 2002-2004 at main station of Dryland Agricultural Research Institute in Maragheh, Iran. Treatments included three sowing dates (early, normal and late, three levels of single irrigation (rainfed, 50 mm and 100 mm only at planting time and five wheat varieties (three numbered lines, Azar2 and double-cross Shahi. Results revealed that interactions of SD, SI and wheat varieties were significant for grain yield, number of kernels per spike and water productivity (P≤0.01. Single irrigation at normal planting time increased grain yield, straw, biomass, harvest index, and water productivity. Grain yield and water productivity were increased by 131% and 84.8%, respectively. Single irrigation at late planting time was not significant on agronomic traits and produced low water productivity. Regarding the reaction of wheat to planting date and single irrigation, results showed that normal single irrigation can improve yield, yield components and water productivity index. The effectiveness of single irrigation under dryland conditions can be observed in all wheat cultivars. Although this effectiveness on yield and yield components is observable, but it is necessary to select the time of irrigation properly.

Evaluation of the Effect of Agroforestry and Conventional System on Yield and Yield Components of Barley Hordeum vulgare L. (and Wheat Triticum

Directory of Open Access Journals (Sweden)

monir nazari

2017-09-01

Full Text Available Introduction: Low sustainability, soil erosion and loss of soil fertility in conventional systems are the major threats to the agricultural production systems. These threats leads researchers towards more attention to different agroforestry systems including alley cropping as a solution in different regions of the world. Agroforestry has attracted considerable attentions because of its potential to maintain or increase productivity in areas with high energy input in which large scale agricultural systems are impractical. It is often assumed that appropriate agroforestry systems can provide the essential ecological functions needed to ensure sustainability and maintain microclimatic and other favorable influences, and that such benefits may outweigh their enhanced use of water in areas of limited water availability. Evidences suggest that diversity in agroecosystems, in particular the integration of different perennial crops or trees (agroforestry, augments nutrient capture and cycling processes; processes that in turn lead to reduced reliance on nutrient or water inputs, abatement of air and water pollution, and enhancement of other ecosystem services across multiple spatial and temporal scales. Agroforestry is viewed as providing ecosystem services, has many environmental benefits and economic advantages as part of a multifunctional agroecosystem. Conventional cultivation of barley and wheat systems in Saman Region has many problems about sustainability of production, erosion of soil, yield stability and soil nutrient properties. On the other hand, planting of Almond is a good option for farmers to make orchards, in compare to Nut. Although some farmers do Agroforestry as an innovative practice, but studying the advantages of these systems and finding their rewards, because of its unique benefits in dry, poor and endangered areas, could help farmers to increase their cultivation area as they wish, particularly in Saman region. Materials and

Yield trends and yield gap analysis of major crops in the world

NARCIS (Netherlands)

Hengsdijk, H.; Langeveld, J.W.A.

2009-01-01

This study aims to quantify the gap between current and potential yields of major crops in the world, and the production constraints that contribute to this yield gap. Using an expert-based evaluation of yield gaps and the literature, global and regional yields and yield trends of major crops are

ESTIMATION OF PEA GRAIN YIELD STABILITY (Pisum sativum L.

Directory of Open Access Journals (Sweden)

Tihomir Čupić

2003-06-01

Full Text Available The paper aimed to determine yield and estimate pea grain yield stability of newly-created lines JSG-1 (cultivar in recognition process as well as compare with foreign origin cultivars in agroecological area of east Slavonia. The trial was set up by a randomized block design on the experimental field of Agricultural Institute Osijek in four replicates in the five-year period (1998 – 2002. Six (five foreign and one inland cultivars were included by the trial: Eiffil, Erbi, JP-5, JSG-1 (in a recognition process, Torsz and Baccara. Stability parameters were calculated by the grouping method after Francis and Kannenberg (1978 and by the model of individual stability estimation after Eberhart and Russel method (1966. According to Francis and Kannenberg, cultivars Eiffil, Erbi, JSG-1 and Baccara belonged to group I known for high yield and low trait varying coefficient, thus, represent stabile yield cultivars. According to regression coefficient and regression deviation variance the most stabile cultivar appeared to be cultivar JSG-1 (bi =1.06 and S2 di=0.010 and the lowest one was Torsz (bi =0.67 and S2 di =0.160. Cultivar Baccara (bi = 1.22 and S2 di =0.034 was comprised by the group of unstabile and adaptible for high-yielding environments.

The ratio Rdp of the quasi-elastic nd → p(nn) to the elastic np → pn charge-exchange process yields at 0 deg over 0.55-2.0 GeV neutron beam energy region: 2. Comparison of the results with the model dependent calculations

International Nuclear Information System (INIS)

Sharov, V.I.; Morozov, A.A.; Shindin, R.A.; Chernykh, E.V.; Nomofilov, A.A.; Strunov, L.N.

2008-01-01

In our previous paper, the new experimental results on ratio R dp of the quasi-elastic charge-exchange yield at 0 Lab d eg for the nd → p + (nn) reaction to the elastic np → pn charge-exchange yield, were presented. The measurements were carried out at the Nuclotron of the Veksler and Baldin Laboratory of High Energies of the Joint Institute for Nuclear Research at the neutron beam kinetic energies of 0.55, 0.8, 1.0,1.2, 1.4, 1.8 and 2.0 GeV. In this paper, the comparison of these R dp data with the R dp calculations obtained within the impulse approximation by using the invariant amplitude sets from the GW/VPI phase-shift analysis, is made. The calculated R dp values with the set of invariant amplitude data for the elastic np → pn charge exchange at θ p,CM = 0 deg are in a good agreement with the experimental data. It has been confirmed that at θ p,CM = 0 deg the nd → pnn process is caused by the elastic np → pn charge-exchange reaction. Thus, it has been shown that the obtained experimental R dp results can be used for the Delta-Sigma experimental programme to reduce the total ambiguity in the extraction of the amplitude parts

Spatial Sampling of Weather Data for Regional Crop Yield Simulations

Science.gov (United States)

Van Bussel, Lenny G. J.; Ewert, Frank; Zhao, Gang; Hoffmann, Holger; Enders, Andreas; Wallach, Daniel; Asseng, Senthold; Baigorria, Guillermo A.; Basso, Bruno; Biernath, Christian;

Resolving Business Process Interference via Dynamic Reconfiguration

NARCIS (Netherlands)

van Beest, Nick R. T. P.; Bulanov, Pavel; Wortmann, Hans; Lazovik, Alexander; Maglio, PP; Weske, M; Yang, J; Fantinato, M

2010-01-01

For business processes supported by service-oriented information systems, concurrent execution of business processes still may yield undesired business outcomes as a result of process interference. For instance, concurrent processes may partially depend on a semantically identical process variable,

NIF total neutron yield diagnostic

International Nuclear Information System (INIS)

Cooper, Gary W.; Ruiz, Carlos L.

2001-01-01

We have designed a total neutron yield diagnostic for the National Ignition Facility (NIF) which is based on the activation of In and Cu samples. The particular approach that we have chosen is one in which we calibrate the entire counting system and which we call the ''F factor'' method. In this method, In and/or Cu samples are exposed to known sources of DD and DT neutrons. The activated samples are then counted with an appropriate system: a high purity Ge detector for In and a NaI coincidence system for Cu. We can then calculate a calibration factor, which relates measured activity to total neutron yield. The advantage of this approach is that specific knowledge of such quantities as cross sections and detector efficiencies is not needed. Unless the actual scattering environment of the NIF can be mocked up in the calibration experiment, the F factor will have to be modified using the results of a numerical simulation of the NIF scattering environment. In this article, the calibration factor methodology will be discussed and experimental results for the calibration factors will be presented. Total NIF neutron yields of 10 9 --10 19 can be measured with this method assuming a 50 cm stand-off distance can be employed for the lower yields

Response of switchgrass yield to future climate change

International Nuclear Information System (INIS)

Tulbure, Mirela G; Wimberly, Michael C; Owens, Vance N

2012-01-01

A climate envelope approach was used to model the response of switchgrass, a model bioenergy species in the United States, to future climate change. The model was built using general additive models (GAMs), and switchgrass yields collected at 45 field trial locations as the response variable. The model incorporated variables previously shown to be the main determinants of switchgrass yield, and utilized current and predicted 1 km climate data from WorldClim. The models were run with current WorldClim data and compared with results of predicted yield obtained using two climate change scenarios across three global change models for three time steps. Results did not predict an increase in maximum switchgrass yield but showed an overall shift in areas of high switchgrass productivity for both cytotypes. For upland cytotypes, the shift in high yields was concentrated in northern and north-eastern areas where there were increases in average growing season temperature, whereas for lowland cultivars the areas where yields were projected to increase were associated with increases in average early growing season precipitation. These results highlight the fact that the influences of climate change on switchgrass yield are spatially heterogeneous and vary depending on cytotype. Knowledge of spatial distribution of suitable areas for switchgrass production under climate change should be incorporated into planning of current and future biofuel production. Understanding how switchgrass yields will be affected by future changes in climate is important for achieving a sustainable biofuels economy. (letter)

A high throughput DNA extraction method with high yield and quality

Directory of Open Access Journals (Sweden)

Xin Zhanguo

2012-07-01

Full Text Available Abstract Background Preparation of large quantity and high quality genomic DNA from a large number of plant samples is a major bottleneck for most genetic and genomic analyses, such as, genetic mapping, TILLING (Targeting Induced Local Lesion IN Genome, and next-generation sequencing directly from sheared genomic DNA. A variety of DNA preparation methods and commercial kits are available. However, they are either low throughput, low yield, or costly. Here, we describe a method for high throughput genomic DNA isolation from sorghum [Sorghum bicolor (L. Moench] leaves and dry seeds with high yield, high quality, and affordable cost. Results We developed a high throughput DNA isolation method by combining a high yield CTAB extraction method with an improved cleanup procedure based on MagAttract kit. The method yielded large quantity and high quality DNA from both lyophilized sorghum leaves and dry seeds. The DNA yield was improved by nearly 30 fold with 4 times less consumption of MagAttract beads. The method can also be used in other plant species, including cotton leaves and pine needles. Conclusion A high throughput system for DNA extraction from sorghum leaves and seeds was developed and validated. The main advantages of the method are low cost, high yield, high quality, and high throughput. One person can process two 96-well plates in a working day at a cost of $0.10 per sample of magnetic beads plus other consumables that other methods will also need.

Effect of zinc and plant-population on the yield and yield components of maize (zea mays L.)

International Nuclear Information System (INIS)

Kakar, K.M.; Sadiq, S.A.; Tariq, M.

2005-01-01

A field experiment was conducted during 2001 to study the effect of two levels of zinc (0 and 5 kg Zn ha-J) and three plant-densities (60,000, 80,000 and 100,000 plants ha-J) on the performance of two varieties of maize Azam and Pahari and two hybrids N7989 and Babar, at Malakandher Farm of NWFP Agricultural University, Peshawar. Zinc at the rate of 5 kg ha-J increased the cob yield, grain yield and 1000-grain weight, while increase in plant-density significantly increased the number of grains cob-J, number of cob-plant-J, cob-yield, grain-yield and 1000-grain weight. Results revealed that the highest plant-density of 100,000 plant ha-J decreased the number of cobs plant-J, number of grains cob-J and 1000-grain weight. Maximum number of cobs plant-J (0.87), number of grains cob-J (313), cob yield (4602 kg ha-J), grain yield (4222 kg ha-J) and 1000-grain weight (249 g) were obtained with plant- density of 80,000 plant ha-J. The maximum grain-yield of 4333 kg ha-J was recorded in plots of hybrid variety N7989. (author)

On yield gaps and yield gains in intercropping

NARCIS (Netherlands)

Gou, Fang; Yin, Wen; Hong, Yu; Werf, van der Wopke; Chai, Qiang; Heerink, Nico; Ittersum, van Martin K.

2017-01-01

Wheat-maize relay intercropping has been widely used by farmers in northwest China, and based on field experiments agronomists report it has a higher productivity than sole crops. However, the yields from farmers’ fields have not been investigated yet. Yield gap analysis provides a framework to

Effect of Different Tillage Methods and Cover Crop Types on Yield and Yield Components of Wheat

Directory of Open Access Journals (Sweden)

Z Sharefee

2018-05-01

treatments were applied, seedbed preparation was carried out and wheat Anfarm- 4 (Bam was planted. At the end of the growing season, yield and yield components of wheat were measured. Results and Discussion The results indicated that the maximum grain yield, biological yield, and spike.m-2 of wheat were observed with the no-till and reduced tillage treatments. The wheat spike weight significantly increased in the treatment of no-tillage compared with conventional tillage treatment. It seems that increased crop yield under no-till and reduced till systems might be owing to the enhancement of the soil nutrient status, reduced weed populations, improved physical health of the soil improved soil water status and increased efficiency of nutrient usage in these systems comparing with the conventional tillage systems. The main effect of cover crop type showed that incorporating chickling pea and rocket salad resulted in the greatest grain yield, thousand-kernal weight, spike weight, and biological yield of wheat compared to the control (no cover crop and also chickling pea, rocket salad and barley caused the greatest grain. Spike-1 of wheat compared to the control (no cover crop. Although the use of total cover crops improved yield and yield components in wheat. Chickling pea superiority in many traits was evident in comparison with other cover crops. This superiority could be due to the fact that this plant belongs to the legume family and legumes release higher amounts of nitrogen during decomposition compared to grass species. Grasses produce large amounts of carbon and are slowly decomposed. Although rocket salad does not belong to the legume family, due to having deep roots, it is able to absorb nutrients from the deep soil layers and provide the main plant with these nutrients after its decay. Conclusions The results of this study revealed that employment of conservation tillage systems remarkably affected the yield and yield components of wheat, and the greatest positive

Interaction Effects of Planting Date and Weed Competition on Yield and Yield Components of Three white Bean Cultivars in Semirom

Directory of Open Access Journals (Sweden)

A. Yadavi

2012-06-01

Full Text Available Unsuitable planting and weed competition are the most important factors that greatly reduce the yield of bean. In order to study the effect of planting date on yield and yield components of three white bean cultivars in weed infest and weed free condition a factorial experiment with randomized complete block design and three replications was carried out at Semirom in 2009. The treatments were planting date (May10, May 25 and June 9 and white bean cultivars (Shekofa, Pak and Daneshkade and two levels of weed infestation (weedy and weed free. Results showed that planting date, weed competition and cultivars had significant effects on yield and yield components of white bean. The 30-day delay in planting date reduced the number of pods per plant, seeds per pod, 100 seed weight and biological yield of white bean cultivars, 22.5, 18, 20.1 and 22.5 percent respectively. Also weed competition, reduced the number of seeds per pod, 100 seed weight and biological yield respectively by 13.5, 5.7 and 27.1 percent. Result of planting date and weed competition interaction effects indicated that the weed competition decreased grain yield (53% in third planting date more than others and delay in planting date was companion with increasing weed density and dry weight in flowering stage of bean. Also Shekofa cultivar had highest grain yield (3379 kg/ha at the first planting date and weed free condition.

Evaluation of Yield and Yield Components of Some Pinto bean (Phaseolus vulgaris L. Genotypes under Late Season Water Deficit Conditions

Directory of Open Access Journals (Sweden)

somayyeh soheili movahhed

2017-10-01

Full Text Available Introduction Drought or water deficit stress is the most important environmental factor which has severe negative impacts on crop yields, especially when the water stress occurs in the flowering stage. Iran is located in arid and semi-arid areas, therefore, attention to the effects of water deficit stress in different stages of plants growth seems necessary. Bean (Phaseolus vulgaris L. is one of the most important legumes that has a major contribution to human diet and provides an important part of the human protein. According to studies, cultivation areas of legumes in Iran are about 97300 hectares and its total production is about 208350 tons of grain. Bean is a fast-growing plant (Tran and Singh, 2002, thus soil water must be sufficiently available to ensure its desirable growth and yield. The aim of this study was to investigate the effect of drought stress on yield and yield components of some pinto bean (Phaseolus vulgaris L. cultivated in Zanjan province. Materials and methods An experiment was conducted as spilt plot based on randomized complete block design with four replications in Zanjan university research farm. Irrigation levels (control and drought stress and genotypes (Local khomein, Sadri, Ks21193 and Ks21189 were set in the main and subplot, respectively. Water deficit stress was applied during flowering stage (50% of the plants were at anthesis. Sampling was performed to measure yield and yield components at the end of the growth period and final maturity. In this experiment number of pod per Plant, numberof grain per pod, 100 grain weight, grain yield, biological yield and harvest index were measured. Results and Discussion In this experiment it was observed that drought stress, genotype and interact irrigation×genotyps were significantly for all traits except biological yield. Drought stress reduced number of pod perplant, number of grain per pod, 100 grain weight, grain yield, biological yield and Harvest Index. Results

Yield stress determination of a physical gel

DEFF Research Database (Denmark)

Hvidt, Søren

2013-01-01

Pluronic F127 solutions form gels in water with high elastic moduli. Pluronic gels can, however, only withstand small deformations and stresses. Different steady shear and oscillatory methods traditionally used to determine yield stress values are compared. The results show that the yield stresses...... values of these gels depend on test type and measurement time, and no absolute yield stress value can be determined for these physical gels....

CIM5 Phase III base process development results

International Nuclear Information System (INIS)

Witt, D.C.

2000-01-01

Integrated Demonstration Runs for the Am/Cm vitrification process were initiated in the Coupled 5-inch Cylindrical Induction Melter (CIM5) on 11/30/98 and completed on 12/9/98. Four successful runs at 60 wt% lanthanide loading were completed which met or exceeded all established criteria. The operating parameters used in these runs established the base conditions for the 5-inch Cylindrical Induction Melter (CIM5) process and were summarized in the 5-inch CIM design basis, SRT-AMC-99-OO01. (1) In subsequent tests, a total of fourteen CIM5 runs were performed using various power inputs, ramp rates and target temperatures to define the preferred processing conditions (2) Process stability and process flexibility were the key criteria used in assessing the results for each run. A preferred set of operating parameters was defined for the CIM5 batch process and these conditions were used to generate a pre-programmed, automatic processing cycle that was used for the last six CIM.5 runs (3) These operational tests were successfully completed in the January-February time frame and were summarized in SRT-AMC-99-00584. The recommended set of operating conditions defined in Runs No.1 through No.14 was used as the starting point for further pilot system runs to determine the robustness of the process, evaluate a bubbler, and investigate off-normal conditions. CIM5 Phase III Runs No.15 through No.60 were conducted utilizing the pre-programmed, automatic processing cycle to investigate system performance. This report summarizes the results of these tests and provides a recommendation for the base process as well as a processing modification for minimizing volume expansions if americium and/or curium are subject to a thermal reduction reaction like cerium. This document summarizes the results of the base process development tests conducted in the Am/Cm Pilot Facility located in Building 672-T

Effect of mass loss on the chemical yields from massive stars

Energy Technology Data Exchange (ETDEWEB)

Chiosi, C; Caimmi, R [Padua Univ. (Italy). Istituto di Astronomia

1979-01-01

Recent results on the calculation of the chemical yields from massive stars, are rediscussed by taking into account the occurrence of mass loss by stellar wind during the core H- and He-burning phases. The new yields are found to be compatible with the observed distribution of chemical abundances in the solar system, except for He. The net enrichment of several elements over the galaxy's lifetime is found to be consistent with the current estimate of the star formation rate, if we adopt a two phase process of galaxy formation (halodisk). The relative He to heavy element enrichment rate ..delta..Y/..delta..Z turns out to agree with the observational value when mass loss by stellar wind is taken into account.

Sensitivity of CERES-Maize yield simulation to the selected weather data

International Nuclear Information System (INIS)

Zalud, Z.; Stastna, M.

2000-01-01

Sensitivity analysis of selected weather data runs after successful parametrization and validation of the CERES-Maize simulation model. Estimation of the potential yield has been carried out during the long term experiment (1980-1997) as well as the estimation of influence of meteorological parameters on the simulation results for the water-limited yield. 10 % under and over stimulation of global radiation and precipitation as well as increasing and decreasing temperature by 1 deg C on simulated potential and water-limited yield have been done. In most of the years, air temperature underestimation resulted in a higher simulated grain yield and overstimulation shown a lower yield for water limited level. Overestimation of precipitation during wet days in growing period of the maize leads to an increase of amount of water available for the plant and to increase the yield. Underestimation of global radiation by 10 % resulted in a decline in simulated grain yield from -8.8 to -9.9 %. The overestimation caused increase of the yield from 7.8 to 10 %. Overestimation by 10 % resulted in a slight underestimation of the yield in low yielding years and underestimation of global radiation by 10 % in overestimation of the yield. The effect was opposite in high yielding years

A network-based approach for semi-quantitative knowledge mining and its application to yield variability

Science.gov (United States)

Schauberger, Bernhard; Rolinski, Susanne; Müller, Christoph

2016-12-01

Variability of crop yields is detrimental for food security. Under climate change its amplitude is likely to increase, thus it is essential to understand the underlying causes and mechanisms. Crop models are the primary tool to project future changes in crop yields under climate change. A systematic overview of drivers and mechanisms of crop yield variability (YV) can thus inform crop model development and facilitate improved understanding of climate change impacts on crop yields. Yet there is a vast body of literature on crop physiology and YV, which makes a prioritization of mechanisms for implementation in models challenging. Therefore this paper takes on a novel approach to systematically mine and organize existing knowledge from the literature. The aim is to identify important mechanisms lacking in models, which can help to set priorities in model improvement. We structure knowledge from the literature in a semi-quantitative network. This network consists of complex interactions between growing conditions, plant physiology and crop yield. We utilize the resulting network structure to assign relative importance to causes of YV and related plant physiological processes. As expected, our findings confirm existing knowledge, in particular on the dominant role of temperature and precipitation, but also highlight other important drivers of YV. More importantly, our method allows for identifying the relevant physiological processes that transmit variability in growing conditions to variability in yield. We can identify explicit targets for the improvement of crop models. The network can additionally guide model development by outlining complex interactions between processes and by easily retrieving quantitative information for each of the 350 interactions. We show the validity of our network method as a structured, consistent and scalable dictionary of literature. The method can easily be applied to many other research fields.

Genotypic Variation in Yield, Yield Components, Root Morphology and Architecture, in Soybean in Relation to Water and Phosphorus Supply

Science.gov (United States)

He, Jin; Jin, Yi; Du, Yan-Lei; Wang, Tao; Turner, Neil C.; Yang, Ru-Ping; Siddique, Kadambot H. M.; Li, Feng-Min

2017-01-01

Water shortage and low phosphorus (P) availability limit yields in soybean. Roots play important roles in water-limited and P-deficient environment, but the underlying mechanisms are largely unknown. In this study we determined the responses of four soybean [Glycine max (L.) Merr.] genotypes [Huandsedadou (HD), Bailudou (BLD), Jindou 21 (J21), and Zhonghuang 30 (ZH)] to three P levels [applied 0 (P0), 60 (P60), and 120 (P120) mg P kg-1 dry soil to the upper 0.4 m of the soil profile] and two water treatment [well-watered (WW) and water-stressed (WS)] with special reference to root morphology and architecture, we compared yield and its components, root morphology and root architecture to find out which variety and/or what kind of root architecture had high grain yield under P and drought stress. The results showed that water stress and low P, respectively, significantly reduced grain yield by 60 and 40%, daily water use by 66 and 31%, P accumulation by 40 and 80%, and N accumulation by 39 and 65%. The cultivar ZH with the lowest daily water use had the highest grain yield at P60 and P120 under drought. Increased root length was positively associated with N and P accumulation in both the WW and WS treatments, but not with grain yield under water and P deficits. However, in the WS treatment, high adventitious and lateral root densities were associated with high N and P uptake per unit root length which in turn was significantly and positively associated with grain yield. Our results suggest that (1) genetic variation of grain yield, daily water use, P and N accumulation, and root morphology and architecture were observed among the soybean cultivars and ZH had the best yield performance under P and water limited conditions; (2) water has a major influence on nutrient uptake and grain yield, while additional P supply can modestly increase yields under drought in some soybean genotypes; (3) while conserved water use plays an important role in grain yield under drought

Sensitivity of the ATLAS experiment to discover the decay H{yields} {tau}{tau} {yields}ll+4{nu} of the Standard Model Higgs Boson produced in vector boson fusion

Energy Technology Data Exchange (ETDEWEB)

Schmitz, Martin

2011-05-17

A study of the expected sensitivity of the ATLAS experiment to discover the Standard Model Higgs boson produced via vector boson fusion (VBF) and its decay to H{yields} {tau}{tau}{yields} ll+4{nu} is presented. The study is based on simulated proton-proton collisions at a centre-of-mass energy of 14 TeV. For the first time the discovery potential is evaluated in the presence of additional proton-proton interactions (pile-up) to the process of interest in a complete and consistent way. Special emphasis is placed on the development of background estimation techniques to extract the main background processes Z{yields}{tau}{tau} and t anti t production using data. The t anti t background is estimated using a control sample selected with the VBF analysis cuts and the inverted b-jet veto. The dominant background process Z{yields}{tau}{tau} is estimated using Z{yields}{mu}{mu} events. Replacing the muons of the Z{yields}{mu}{mu} event with simulated {tau}-leptons, Z{yields}{tau}{tau} events are modelled to high precision. For the replacement of the Z boson decay products a dedicated method based on tracks and calorimeter cells is developed. Without pile-up a discovery potential of 3{sigma} to 3.4{sigma} in the mass range 115 GeV

EMPIRICALLY DERIVED INTEGRATED STELLAR YIELDS OF Fe-PEAK ELEMENTS

International Nuclear Information System (INIS)

Henry, R. B. C.; Cowan, John J.; Sobeck, Jennifer

2010-01-01

We present here the initial results of a new study of massive star yields of Fe-peak elements. We have compiled from the literature a database of carefully determined solar neighborhood stellar abundances of seven iron-peak elements, Ti, V, Cr, Mn, Fe, Co, and Ni, and then plotted [X/Fe] versus [Fe/H] to study the trends as functions of metallicity. Chemical evolution models were then employed to force a fit to the observed trends by adjusting the input massive star metallicity-sensitive yields of Kobayashi et al. Our results suggest that yields of Ti, V, and Co are generally larger as well as anticorrelated with metallicity, in contrast to the Kobayashi et al. predictions. We also find the yields of Cr and Mn to be generally smaller and directly correlated with metallicity compared to the theoretical results. Our results for Ni are consistent with theory, although our model suggests that all Ni yields should be scaled up slightly. The outcome of this exercise is the computation of a set of integrated yields, i.e., stellar yields weighted by a slightly flattened time-independent Salpeter initial mass function and integrated over stellar mass, for each of the above elements at several metallicity points spanned by the broad range of observations. These results are designed to be used as empirical constraints on future iron-peak yield predictions by stellar evolution modelers. Special attention is paid to the interesting behavior of [Cr/Co] with metallicity-these two elements have opposite slopes-as well as the indirect correlation of [Ti/Fe] with [Fe/H]. These particular trends, as well as those exhibited by the inferred integrated yields of all iron-peak elements with metallicity, are discussed in terms of both supernova nucleosynthesis and atomic physics.

The effect of sowing date and plant density on yield and yield components of safflower (Carthamus tinctorious L. in Rokh plateau .

Directory of Open Access Journals (Sweden)

seyd fazel fazeli kakhaki

2009-06-01

Full Text Available To investigate the effect of sowing date and plant density on yield and yield components of safflower ( Carthamus tinctorious as well as evaluating the possibility of the second sowing of the plant in Torbat Heidariyeh , a field experiment was conducted in Rokh, Cold Season Cereal Research Station 2005 . The experiment was conducted in split plot arrangement in complete randomized block design with four replications . Main plots were sowing date in five levels including 9 April, 10 May, 31 May, 20 June, 11 July and sub plots were plant density in three levels including 300000, 400000, 500000 plants per hectar. Some charactristics such as the number of capitulum per square meter, seed number in capitulum, seed weight, harvest index and seed yeild was evaluated.The highest seed yield was obtained in first sowing date in 3347 kg/ha and a delay in sowing date resulted a decrease in yield. The cold weather in (05/11/2005 caused flower fertility not accured, consequently, sowing was not successful . Results showed that the effect of sowing date on yield depends on the number of capitulum per unit area and the number of grains per capitulum. These two characteristics in th first sowing date in respect of the other dates were higher. The effect of density on yield was significant resulted on yield increase due to capitulum increase in unit area. As a result, the first sowing date with the highest density is recommended. However, The third and fourth sowing date can be considered as the second planting in a sequeational cropping system .

Temperature and precipitation effects on wheat yield across a European transect

DEFF Research Database (Denmark)

Pirttioja, N; Carter, T.; Fronzek, S

2015-01-01

his study explored the utility of the impact response surface (IRS) approach for investigating model ensemble crop yield responses under a large range of changes in climate. IRSs of spring and winter wheat Triticum aestivum yields were constructed from a 26-member ensemble of process-based crop s...... additional insights into sensitivities to inter-model and inter-annual variability. Taken together, these sensitivities may help to pinpoint processes such as heat stress, vernalisation or drought effects requiring refinement in future model development....

Yield enhancement with DFM

Science.gov (United States)

Paek, Seung Weon; Kang, Jae Hyun; Ha, Naya; Kim, Byung-Moo; Jang, Dae-Hyun; Jeon, Junsu; Kim, DaeWook; Chung, Kun Young; Yu, Sung-eun; Park, Joo Hyun; Bae, SangMin; Song, DongSup; Noh, WooYoung; Kim, YoungDuck; Song, HyunSeok; Choi, HungBok; Kim, Kee Sup; Choi, Kyu-Myung; Choi, Woonhyuk; Jeon, JoongWon; Lee, JinWoo; Kim, Ki-Su; Park, SeongHo; Chung, No-Young; Lee, KangDuck; Hong, YoungKi; Kim, BongSeok

2012-03-01

A set of design for manufacturing (DFM) techniques have been developed and applied to 45nm, 32nm and 28nm logic process technologies. A noble technology combined a number of potential confliction of DFM techniques into a comprehensive solution. These techniques work in three phases for design optimization and one phase for silicon diagnostics. In the DFM prevention phase, foundation IP such as standard cells, IO, and memory and P&R tech file are optimized. In the DFM solution phase, which happens during ECO step, auto fixing of process weak patterns and advanced RC extraction are performed. In the DFM polishing phase, post-layout tuning is done to improve manufacturability. DFM analysis enables prioritization of random and systematic failures. The DFM technique presented in this paper has been silicon-proven with three successful tape-outs in Samsung 32nm processes; about 5% improvement in yield was achieved without any notable side effects. Visual inspection of silicon also confirmed the positive effect of the DFM techniques.

A comparison of multi-metal deposition processes utilising gold nanoparticles and an evaluation of their application to 'low yield' surfaces for finger mark development.

Science.gov (United States)

Fairley, C; Bleay, S M; Sears, V G; NicDaeid, N

2012-04-10

This paper reports a comparison of the effectiveness and practicality of using different multi-metal deposition processes for finger mark development. The work investigates whether modifications can be made to improve the performance of the existing process published by Schnetz. Secondly, we compare the ability of different multi-metal deposition processes to develop finger marks on a range of surfaces with that of other currently used development processes. All published multi-metal deposition processes utilise an initial stage of colloidal gold deposition followed by enhancement of the marks with using a physical developer. All possible combinations of colloidal gold and physical developer stages were tested. The method proposed by Schnetz was shown to be the most effective process, however a modification which reduced the pH of the enhancement solution was revealed to provide the best combination of effectiveness and practicality. In trials comparing the modified formulation with vacuum metal deposition, superglue and powder suspensions on surfaces which typically give low finger mark yields (cling film, plasticised vinyl, leather and masking tape), the modified method produced significantly better results over existing processes for cling film and plasticised vinyl. The modified formulation was found to be ineffective on both masking tape and leather. It is recommended that further tests be carried out on the modified multi-metal deposition formulation to establish whether it could be introduced for operational work on cling film material in particular. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

Development of methodics for the characterization of the composition of the ion-collision-induced secondary-particle flux by comparison of the yield contributions of photoinduced ion formation processes

International Nuclear Information System (INIS)

Vering, Guido

2008-01-01

The aim of this work was to develop a method to distinguish between different ion formation processes and to determine the influence of these processes on the total number of detected monatomic ions of a certain element. A vector/matrix-formalism was developed, which describes the physical processes of sputtering, ion formation, mass separation and detection in laser-SNMS. In the framework of the method developed, based on this theoretic formalism, changes in the secondary flux contribution of the respective element were observed by comparing the detected monatomic ion yield obtained in specifically aligned (SIMS and) laser-SNMS experiments. The yields resulting from these experiments were used to calculate characteristic numbers to compare the flux composition from different surfaces. The potential of the method was demonstrated for the elements boron, iron and gadolinium by investigating the changes in the flux composition of secondary particles sputtered from metallic surfaces, as a function of the oxygen concentration at the surface. Finally, combined laser-SNMS depth profiles and images, obtained with both laser systems, were presented to demonstrate how the parallel detection of the three differently originated ion signals of the same element can be used to get additional information about the composition of the flux of secondary particles synchronously during the analysis of elemental distributions. In this respect the presented method can be a very helpful tool to prevent misleading interpretations of SIMS or laser-SNMS data. (orig.)

Robust high-yield ~1 TBq production of cyclotron based sodium [99mTc]pertechnetate.

Science.gov (United States)

Andersson, J D; Thomas, B; Selivanova, S V; Berthelette, E; Wilson, J S; McEwan, A J B; Gagnon, K

2018-03-02

This paper presents the irradiation and processing of high-current 100 Mo targets at the University of Alberta (UofA) in a GMP compliant setting. For purpose of comparison with a second production facility, additional studies at Centre Hospitalier Universitaire de Sherbrooke (CHUS) are also described. More than 70% of today's diagnostic radiopharmaceuticals are based on 99m Tc, however the conventional supply chain for obtaining 99m Tc is fragile. The aim of this work was to demonstrate reliable high yield production and processing of 99m Tc with medium-energy, high-current, cyclotrons. We used two cyclotrons (TR-24, Advanced Cyclotron Systems, Inc) for irradiations with 22 MeV or 24 MeV incident energy and 400 μA current up to a maximum of 6 h. The irradiated 100 Mo was dissolved using peroxide, basified using ammonium carbonate, and purified using a PEG-based solid phase extraction technique. High-yield productions with 22 MeV (400 μA, 6 h) yielded an average isolated [ 99m Tc]TcO 4 - yield of 878 GBq ± 99 GBq (23.7 Ci ± 2.7 Ci) decay corrected to EOB, n = 8 (isolated saturation yield: 4.36 ± 0.49 GBq/μA). Irradiations with 24 MeV (400 μA, 6 h) resulted in an average isolated [ 99m Tc]TcO 4 - yield of 993 GBq ± 100 GBq (26.8 Ci ± 2.7 Ci) decay corrected to EOB, n = 7 (isolated saturation yield: 4.97 ± 0.50 GBq/μA). These yields corresponds to 600-700 GBq (16-19 Ci) of [ 99m Tc]TcO 4 - at release (i.e. 3 hour post-EOB). For all tested batches, the QC results were within the recently published specifications in the European Pharmacopoeia. Reliable near-TBq production yields for 99m Tc can be obtained using medium-energy cyclotrons. This work presents evidence that medium-energy high-current cyclotrons can provide high yields of [ 99m Tc]TcO 4 - with radionuclidic impurities levels within the specifications of the existing European Pharmacopoeia monograph, indicating that this

VARIABILITY OF YIELD AND YIELD COMPONENTS IN “EGUSI ...

African Journals Online (AJOL)

journal

Estimate of expected genetic advance in seed yield plant-1 ranged between. 25.90-48.40%. ..... values in fruit and seed yield characters have been reported in culinary melon, ... and Khund, A. 2004. Extent of heterosis and heritability in some.

Effect of Limited Irrigation on Yield and Yield Component of Several Sweet Corn (Zea mays L.var Saccharata Varieties

Directory of Open Access Journals (Sweden)

Sh Ghazian Tafrishi

2013-08-01

Full Text Available A randomized complete block design with four replications and a split plot arrangement was conducted in 2010, in order to study the effect of limited irrigation on yield and yield component of sweet corn. Water levels were (100%, 80%, and 60% replacement of plant water requirement which served as main plots. Subplot was a factorial arrangement of three different sweet corn varieties (Merit, Obsession and KSC403 with two planting methods (raised bed and furrow planting. The evaluated traits were ear length, ear diameter, kernels number per row, seed rows per ear, kernel depth, seed thousands weight, kernel yield, shoot biomass, harvest index and Anthesis- silking interval. Results show that limited irrigation significantly decreased all measured characteristics but harvest index. Effect of varieties was significant on evaluated traits too. Kernel weight and seed depth were significantly affected by interaction between variety and planting method. The highest yield was found for 100% replacement of water requirement irrigation level whit 15.2 tones per hectare kernel weight and the lowest belongs to 60% replacement of water requirement by 8.6 tones per hectare kernel weight. Merit and KSC 403 produces the highest (15.9 ton/ha and lowest (8.8 ton/ha seed yield, respectively. Harvest index of different varieties were not affected by irrigation regime. Results show that, in whole, limited irrigation, decreased seed yield in all varieties by affecting diverse yield component.

Fission product yields

International Nuclear Information System (INIS)

Valenta, V.; Hep, J.

1978-01-01

Data are summed up necessary for determining the yields of individual fission products from different fissionable nuclides. Fractional independent yields, cumulative and isobaric yields are presented here for the thermal fission of 235 U, 239 Pu, 241 Pu and for fast fission (approximately 1 MeV) of 235 U, 238 U, 239 Pu, 241 Pu; these values are included into the 5th version of the YIELDS library, supplementing the BIBFP library. A comparison is made of experimental data and possible improvements of calculational methods are suggested. (author)

A survey for low stau yields in the MSSM

International Nuclear Information System (INIS)

Heisig, Jan; Kersten, Jörn; Panes, Boris; Robens, Tania

2014-01-01

We study the implications of LHC results for the abundance of long-lived staus after freeze-out from thermal equilibrium in a super-WIMP dark matter scenario. We classify regions in the MSSM parameter space according to the stau yield, considering all possible co-annihilation effects as well as the effects of resonances and large Higgs-sfermion couplings. Afterwards, we examine the viability of these regions after imposing experimental and theoretical constraints, in particular a Higgs mass around 125 GeV and null-searches for heavy stable charged particles (HSCP) at the LHC. We work in a pMSSM framework and perform a Monte Carlo scan over the parameter space. To interpret the HSCP searches in our scenario, we consider all potentially important superparticle production processes, developing a fast estimator for NLO cross sections for electroweak and strong production at the LHC. After applying all constraints, we find that stau yields below 10 −14 occur only for resonant annihilation via a heavy Higgs in combination with either co-annihilation or large left-right stau mixing. We encounter allowed points with yields as low as 2×10 −16 , thus satisfying limits from big bang nucleosynthesis even for large stau lifetimes

Quality and Yield of Cannabis Products

DEFF Research Database (Denmark)

Kastorp, Grith; Lindholst, Christian

2011-01-01

Abstract. 180 seizures containing 667 different samples of cannabis products from 5 police districts in Jutland were examined from 2008 to the present. The samples were divided into the groups: hashish, marihuana (leaves and buds) and whole plants (indoors and outdoors). Cannabis seized from indoor...... cultivation was examined in order to determine THC content and yield. The results are used by the Danish Police Attorney to estimate expected yields in cases with unripe cannabis plants. The results indicate that the THC content found in locally grown marihuana is slightly higher than in hashish. However...

INFLUENCE OF BLEACHING WITH OZONE AND PEROXIDO OF HYDROGEN IN THE YIELD AND QUALITY OF SECONDARY FIBERS

Directory of Open Access Journals (Sweden)

Gustavo Ventorim

2010-08-01

Full Text Available In this study, Total Chlorine Free (TCF bleaching processes were evaluated for bleaching a secondary fiber of different origens. The samples were bleached to a target brightness of 78 % ISO. The results were interpreted on the basis of chemical cost to reach the target brightness, bleaching yield and bleached pulp quality as measured by viscosity, fluorescence and b* color coordinate. The ozone stage was responsible for improve TCF bleaching performance. The pulp bleached by sequences contained a ozone stage followed by chelation, without interstage washing (ZQ, and a final hydrogen peroxide stage unpressurized (P or pressurized with oxygen (PO, designed as (ZQ(PO showed good results. These sequences decreased pulp b* coordinate significantly and fluorescence slightly. For  all three bleaching processes, it was determined that process yield is negatively affected by hot alkaline stages such as oxygen, O, peroxide, P, and peroxide pressurized with oxygen, (PO and also for the origin of the pulps of secondary fibers.

Comparative Transcriptome Analysis Reveals Different Silk Yields of Two Silkworm Strains.

Directory of Open Access Journals (Sweden)

Juan Li

Full Text Available Cocoon and silk yields are the most important characteristics of sericulture. However, few studies have examined the genes that modulate these features. Further studies of these genes will be useful for improving the products of sericulture. JingSong (JS and Lan10 (L10 are two strains having significantly different cocoon and silk yields. In the current study, RNA-Seq and quantitative polymerase chain reaction (qPCR were performed on both strains in order to determine divergence of the silk gland, which controls silk biosynthesis in silkworms. Compared with L10, JS had 1375 differentially expressed genes (DEGs; 738 up-regulated genes and 673 down-regulated genes. Nine enriched gene ontology (GO terms were identified by GO enrichment analysis based on these DEGs. KEGG enrichment analysis results showed that the DEGs were enriched in three pathways, which were mainly associated with the processing and biosynthesis of proteins. The representative genes in the enrichment pathways and ten significant DEGs were further verified by qPCR, the results of which were consistent with the RNA-Seq data. Our study has revealed differences in silk glands between the two silkworm strains and provides a perspective for understanding the molecular mechanisms determining silk yield.

Simulating and Predicting Cereal Crop Yields in Ethiopia: Model Calibration and Verification

Science.gov (United States)

Yang, M.; Wang, G.; Ahmed, K. F.; Eggen, M.; Adugna, B.; Anagnostou, E. N.

2017-12-01

Agriculture in developing countries are extremely vulnerable to climate variability and changes. In East Africa, most people live in the rural areas with outdated agriculture techniques and infrastructure. Smallholder agriculture continues to play a key role in this area, and the rate of irrigation is among the lowest of the world. As a result, seasonal and inter-annual weather patterns play an important role in the spatiotemporal variability of crop yields. This study investigates how various climate variables (e.g., temperature, precipitation, sunshine) and agricultural practice (e.g., fertilization, irrigation, planting date) influence cereal crop yields using a process-based model (DSSAT) and statistical analysis, and focuses on the Blue Nile Basin of Ethiopia. The DSSAT model is driven with meteorological forcing from the ECMWF's latest reanalysis product that cover the past 35 years; the statistical model will be developed by linking the same meteorological reanalysis data with harvest data at the woreda level from the Ethiopian national dataset. Results from this study will set the stage for the development of a seasonal prediction system for weather and crop yields in Ethiopia, which will serve multiple sectors in coping with the agricultural impact of climate variability.

The yield, processing, and biological consequences of clustered DNA damage induced by ionizing radiation

International Nuclear Information System (INIS)

Shikazono, Naoya; Noguchi, Miho; Fujii, Kentaro; Urushibara, Ayumi; Yokoya, Akinari

2009-01-01

After living cells are exposed to ionizing radiation, a variety of chemical modifications of DNA are induced either directly by ionization of DNA or indirectly through interactions with water-derived radicals. The DNA lesions include single strand breaks (SSB), base lesions, sugar damage, and apurinic/apyrimidinic sites (AP sites). Clustered DNA damage, which is defined as two or more of such lesions within one to two helical turns of DNA induced by a single radiation track, is considered to be a unique feature of ionizing radiation. A double strand break (DSB) is a type of clustered DNA damage, in which single strand breaks are formed on opposite strands in close proximity. Formation and repair of DSBs have been studied in great detail over the years as they have been linked to important biological endpoints, such as cell death, loss of genetic material, chromosome aberration. Although non-DSB clustered DNA damage has received less attention, there is growing evidence of its biological significance. This review focuses on the current understanding of (1) the yield of non-DSB clustered damage induced by ionizing radiation (2) the processing, and (3) biological consequences of non-DSB clustered DNA damage. (author)

Yield surfaces for perforated plates with square arrays of holes

International Nuclear Information System (INIS)

Bhattacharya, A.; Venkat Raj, V.

2004-01-01

A symmetric model of a perforated plate containing a 3x3 array of circular holes, arranged in a square pattern, was chosen and elastoplastic finite element analyses were carried out to determine the limit stresses for both pitch and diagonal directions of loading, for different values of biaxiality ratios. Plane stress conditions were assumed and the Tresca and von Mises yield criteria were employed to obtain two different sets of results. Yield surfaces were constructed and 'general cut-out factors' were determined for four different ligament efficiencies. The FEM results obtained by the authors using the Tresca and von Mises yield criteria were compared with the corresponding results of [J. Pressure Vessel Technol. Trans. ASME (1975) 146-154] and [J. Pressure Vessel Technol. Trans. ASME (1997) 122-126], respectively. The results based on the Tresca yield criterion obtained by the present authors and those in [J. Pressure Vessel Technol. Trans. ASME (1975) 146-154] were found to agree well with each other. In the case of the von Mises yield criterion, the agreement with [J. Pressure Vessel Technol. Trans. ASME 122-126] is generally good. The estimates based on the Tresca yield criterion are seen to result in lower values of limit stresses and cut-out factors as compared to those based on the von Mises yield criterion. The difference is attributed to the yield criterion and the flow rule chosen for the analysis. The shape as well as the size of the yield surface was found to depend on the ligament efficiency

Yield asymmetry design of magnesium alloys by integrated computational materials engineering

Energy Technology Data Exchange (ETDEWEB)

Li, Dongsheng [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Joshi, Vineet [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Lavender, Curt [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Khaleel, Mohammad [Qatar Foundation Research adn Development (Qatar); Ahzi, Said [Univ. of Strasbourg (France)

2013-11-01

Deformation asymmetry of magnesium alloys is an important factor on machine design in the automobile industry. Represented by the ratio of compressive yield stress (CYS) against tensile yield stress (TYS), deformation asymmetry is strongly related to texture and grain size. A polycrystalline viscoplasticity model, modified intermediate Φ-model, is used to predict the deformation behavior of magnesium alloys with different grain sizes. Validated with experimental results, integrated computational materials engineering is applied to find out the route in achieving desired asymmetry via thermomechanical processing. For example, CYS/TYS in rolled texture is smaller than 1 under different loading directions. In other textures, such as extruded texture, CYS/TYS is large along the normal direction. Starting from rolled texture, asymmetry will increase to close to 1 along the rolling direction after being compressed to a strain of 0.2. Our modified Φ-model also shows that grain refinement increases CYS/TYS. Along with texture control, grain refinement also can optimize the yield asymmetry. After the grain size decreases to a critical value, CYS/TYS reaches to 1 because CYS increases much faster than TYS. By tailoring the microstructure using texture control and grain refinement, it is achievable to optimize yield asymmetry in wrought magnesium alloys.

Meat yield and quality of Tanzania Shorthorn Zebu cattle finished on molasses/maize grain with agro-processing by-products in 90 days feedlot period

DEFF Research Database (Denmark)

Asimwe, L.; Kimambo, A E; Laswai, G

2016-01-01

This study was conducted to evaluate the effects of feeding molasses or maize grain with agro-processing by-products on yield and quality of meat from Tanzania shorthorn zebu (TSZ) cattle. Forty five steers aged 2.5 to 3.0 years with 200 +/- 5.4 kg body weight were allocated into five dietary...

Comparison of HSPF and SWAT models performance for runoff and sediment yield prediction.

Science.gov (United States)

Im, Sangjun; Brannan, Kevin M; Mostaghimi, Saied; Kim, Sang Min

2007-09-01

A watershed model can be used to better understand the relationship between land use activities and hydrologic/water quality processes that occur within a watershed. The physically based, distributed parameter model (SWAT) and a conceptual, lumped parameter model (HSPF), were selected and their performance were compared in simulating runoff and sediment yields from the Polecat Creek watershed in Virginia, which is 12,048 ha in size. A monitoring project was conducted in Polecat Creek watershed during the period of October 1994 to June 2000. The observed data (stream flow and sediment yield) from the monitoring project was used in the calibration/validations of the models. The period of September 1996 to June 2000 was used for the calibration and October 1994 to December 1995 was used for the validation of the models. The outputs from the models were compared to the observed data at several sub-watershed outlets and at the watershed outlet of the Polecat Creek watershed. The results indicated that both models were generally able to simulate stream flow and sediment yields well during both the calibration/validation periods. For annual and monthly loads, HSPF simulated hydrologic and sediment yield more accurately than SWAT at all monitoring sites within the watershed. The results of this study indicate that both the SWAT and HSPF watershed models performed sufficiently well in the simulation of stream flow and sediment yield with HSPF performing moderately better than SWAT for simulation time-steps greater than a month.

A new system for seismic yield estimation of underground explosions

International Nuclear Information System (INIS)

Murphy, J.R.

1991-01-01

Research conducted over the past decade has led to the development of a number of innovative procedures for estimating the yields of underground nuclear explosions based on systematic analyses of digital seismic data recorded from these tests. In addition, a wide variety of new data regarding the geophysical environments at Soviet test locations have now become available as a result of the Joint Verification Experiment (JVE) and associated data exchanges. The system described in this paper represents an attempt to integrate all these new capabilities and data into a comprehensive operational prototype which can be used to obtain optimum seismic estimates of explosion yield together with quantitative measures of the uncertainty in those estimates. The implementation of this system has involved a wide variety of technical tasks, including the development of a comprehensive seismic database and related database access software, formulation of a graphical test site information interface for accessing available information on explosion source conditions, design of an interactive seismic analyst station for use in processing the observed data to extract the required magnitude measures and the incorporation of formal statistical analysis modules for use in yield estimation and assessment

Aerial imaging for FABs: productivity and yield aspects

Science.gov (United States)

Englard, Ilan; Cohen, Yaron; Elblinger, Yair; Attal, Shay; Berns, Neil; Shoval, Lior; Ben-Yishai, Michael; Mangan, Shmoolik

2009-03-01

The economy of wafer fabs is changing faster for 3x geometry requirements and below. Mask set and exposure tool costs are almost certain to increase the overall cost per die requiring manufacturers to develop productivity and yield improvements to defray the lithography cell economic burden. Lithography cell cost effectiveness can be significantly improved by increasing mask availability while reducing the amount of mask sets needed during a product life cycle. Further efficiency can be gained from reducing send-ahead wafers and qualification cycle time, and elimination of inefficient metrology. Yield is the overriding die cost modulator and is significantly more sensitive to lithography as a result of masking steps required to fabricate the integrated circuit. Thus, for productivity to increase with minimal yield risk, the sample space of reticle induced source of variations should be large, with shortest measurement acquisition time possible. This paper presents the latest introduction of mask aerial imaging technology for the fab, Aera2TM for Lithography with IntenCTM, as an enabler for efficient lithography manufacturing. IntenCD is a high throughput, high density mask-based critical dimension (CD) mapping technology, with the potential for increasing productivity and yield in a wafer production environment. Connecting IntenCD to a feed forward advance process control (APC) reduces significantly the amount of traditional CD metrology required for robust wafer CD uniformity (CDU) correction and increases wafer CD uniformity. This in turn improves the lithography process window and yield and contributes to cost reduction and cycle time reduction of new reticles qualification. Advanced mask technology has introduced a new challenge. Exposure to 193nm wavelength stimulates haze growth on the mask and imposes a regular cleaning schedule. Cleaning eventually causes mask degradation. Haze growth impacts mask CD uniformity and induce global transmission fingerprint

yield and yield componemts of extra early maize (zea mays l.)

African Journals Online (AJOL)

SHARIFAI

maize crop and improve the soil structures and chemical nutrients of the soil. The significant interaction between intra-row spacing and poultry manure on cob diameter, 100 grain weight and grain yield showed the importance of poultry manure on yield and yield components of maize crop. Poultry manure increases both ...

Kill ratio calculation for in-line yield prediction

Science.gov (United States)

Lorenzo, Alfonso; Oter, David; Cruceta, Sergio; Valtuena, Juan F.; Gonzalez, Gerardo; Mata, Carlos

1999-04-01

The search for better yields in IC manufacturing calls for a smarter use of the vast amount of data that can be generated by a world class production line.In this scenario, in-line inspection processes produce thousands of wafer maps, number of defects, defect type and pictures every day. A step forward is to correlate these with the other big data- generator area: test. In this paper, we present how these data can be put together and correlated to obtain a very useful yield predicting tool. This correlation will first allow us to calculate the kill ratio, i.e. the probability for a defect of a certain size in a certain layer to kill the die. Then we will use that number to estimate the cosmetic yield that a wafer will have.

Integration process and logistics results

International Nuclear Information System (INIS)

2004-01-01

The Procurement and Logistics functions have gone through a process of integration since the beginning of integrated management of Asco and Vandellos II up to the present. These are functions that are likely to be designed for delivering a single product to the rest of the organization, defined from a high level of expectations, and that admit simplifications and materialization of synergy's as they are approached from an integrated perspective. The analyzed functions are as follows: Service and Material Purchasing, Warehouse and Material Management, and Documentation and General Services Management. In all case, to accomplish the integration, objectives, procedures and information systems were unified. As for the organization, a decision was made in each case on whether or not to out source. The decisive corporate strategy to integrate, resulting in actions such as moving corporate headquarters to Vandellos II, corporate consolidation, regulation of employment and implementation of the ENDESA Group Economic Information System (SIE) , has shaped this process, which at present can be considered as practically complete. (Author)

Investigations on evaluation method for yield strength of round bar undermatched joint

International Nuclear Information System (INIS)

Matsumoto, Toshimi; Satoh, Hiroshi; Wadayama, Yoshihide

1988-01-01

The objective values of the yield strength and fracture toughness are respectively more than 1200 MPa and 200 MPa √m at 4K on the structural material for the superconducting magnet container in the Fusion Reactor. It should be desirable to assure the above value for the properties of the weld metal used for the containers. The initial yielding behavior of the undermatched joint is investigated in this paper. Results are as follows. (1) On the nominal stress vs. nominal strain relationship at the central section of the undermatched metal of the joint, the stress increases higher than the yield stress of undermatched metal itself then gradually comes up to a constant value, after the whole area of the undermatched metal starts to generate plastic deformation as the stress reaches the yield stress of the metal. (2) The increase in the stress is caused by the restraint effect of the base metal on the plasticity, and the stress becomes larger with the larger strength ratio of the undermatched metal to the basemetal and with the smaller relative thickness of the joint. (3) The strain does not distribute uniformly at the central section of the undermatched metal along the radial direction during the initial yielding process of the joint. (4) In the case that the yield strength of the joints is considered as the proof stress desided for a constant offset strain, the relationship between the dimensionless yield strength of the joint to the yield stress of the base metal and the relative yield strength of the undermatched metal to the base metal cannot be not established consistently. (5) The assumption that the base metal is rigid, causes the excessive evaluation of the joint yield strength of theoretical analysis. (6) As the quantitative evaluation method, the stress vs. strain relationship and then the algebraic expression has been formulated for the initial yielding behavior of the joint. (author)

An evolutionary yield function based on Barlat 2000 yield function for the superconducting niobium sheet

Science.gov (United States)

Darbandi, Payam; Pourboghrat, Farhang

2011-08-01

Superconducting radio frequency (SRF) niobium cavities are widely used in high-energy physics to accelerate particle beams in particle accelerators. The performance of SRF cavities is affected by the microstructure and purity of the niobium sheet, surface quality, geometry, etc. Following optimum strain paths in the forming of these cavities can significantly control these parameters. To select these strain paths, however, information about the mechanical behavior, microstructure, and formability of the niobium sheet is required. In this study the Barlat 2000 yield function has been used as a yield function for high purity niobium. Results from this study showed that, due to intrinsic behavior, it is necessary to evolve the anisotropic coefficients of Barlat's yield function in order to properly model the plastic behavior of the niobium sheet. The accuracy of the newly developed evolutionary yield function was verified by applying it to the modeling of the hydrostatic bulging of the niobium sheet. Also, in a separate attempt crystal plasticity finite element method was use to model the behavior of the polycrystalline niobium sheet with a particular initial texture.

An evolutionary yield function based on Barlat 2000 yield function for the superconducting niobium sheet

International Nuclear Information System (INIS)

Darbandi, Payam; Pourboghrat, Farhang

2011-01-01

Superconducting radio frequency (SRF) niobium cavities are widely used in high-energy physics to accelerate particle beams in particle accelerators. The performance of SRF cavities is affected by the microstructure and purity of the niobium sheet, surface quality, geometry, etc. Following optimum strain paths in the forming of these cavities can significantly control these parameters. To select these strain paths, however, information about the mechanical behavior, microstructure, and formability of the niobium sheet is required. In this study the Barlat 2000 yield function has been used as a yield function for high purity niobium. Results from this study showed that, due to intrinsic behavior, it is necessary to evolve the anisotropic coefficients of Barlat's yield function in order to properly model the plastic behavior of the niobium sheet. The accuracy of the newly developed evolutionary yield function was verified by applying it to the modeling of the hydrostatic bulging of the niobium sheet. Also, in a separate attempt crystal plasticity finite element method was use to model the behavior of the polycrystalline niobium sheet with a particular initial texture.

Effects of sowing date on the growth and yield of maize cultivars ...

African Journals Online (AJOL)

a

Full Length Research Paper. Effects of sowing date on the ... days (GDD) and was the highest for seed yield and all yield components. The plant sown on 5th ... volume and weight), while plant development refers to processes related to cell ...

Inheritance of grain yield and its correlation with yield components in ...

African Journals Online (AJOL)

SAM

2014-03-19

Mar 19, 2014 ... 7 × 7 incomplete diallel cross of seven wheat parents during the crop season of 2009 to 2010. Mean square of general ... Genetic background and yield traits of the seven parents. Parent. Pedigree. Released year ..... Correlation and path analysis for yield and yield contributing characters in wheat (Triticum ...

Deficit Irrigation Effects on Yield, Yield Components and Seed Production of Three Cultivas of Watermelon (Citrullus lanatus (Thunb Matsum and Nakai

Directory of Open Access Journals (Sweden)

P. Jafari

2015-09-01

Full Text Available A two-year study (2005 - 2006 was carried out to explore the effect of deficit irrigation treatments according to evaporation from a class A basin, including ET= 1 (T1, ET = 0.75 (T2, and ET = 0.5 (T3, on yield, yield components and seed yield of three varieties of watermelon (Charleston Gray, Sugar Baby and Crimson Suite in the Varamin Agricultural Research Center of Iran. A randomized complete block design with a split plot arrangement with four replications was used. The results showed that fruit yield, yield components and seed yield were not significantly different in T1 and T2 treatments in contrary to T3 treatment. Among the yield components, number of fruits per plant most suffered from the negative impact of severe water stress (T3 (1.20 fruit per plant. Rind thickness, percent soluble solids in fruit and seed yield were not affected by water stress. According to phenotypic traits, and correlation coefficients, a significant positive correlation (1% probability level was observed between the weighted average, and the number of fruit with the fruit yield. Crimson Suite cultivar produced the highest yield (2533 kg ha-1 compared to the cultivars Charleston Gray and Sugar Baby. Sugar Baby and Crimson Suite cultivars, with 311.7 and 298.2 kg ha-1, respectively, produced the highest amount of seed. Crimson Suite cultiavr had the highest percentage of soluble solids in fruit (1.35. Rind thickness in Crimson Suites, Charleston Gray and Sugar Baby cultivars were 1.35, 1.13 and 1.10 cm, respectively. The results of this study showed that under a moderate moisture stress condition (ET = 0.75, fruit and seed yield could be similar to the no-water stress conditions.

The Effects of Different Nitrogen Sources on Yield and Yield Components of Sweet Corn (Zea mays L. saccharata

Directory of Open Access Journals (Sweden)

ali mojab ghasroddashti

2017-09-01

percent level calculated for mean comparison. Results and Discussion Results indicated that the different sources of nitrogen had significant effect on the number of grains per row and the number of grains per ear as well as ear and canned yield except for the number of ears per m2 and number of row per ear. Mean comparison indicated that the highest ear yield (2178 g.m-2 was obtained in the treatments of 100 kg N + 4 tons of poultry manure (T6 and the lowest yield (1188 g.m-2 in control (T9. Using of organic sources of nitrogen with chemical fertilizer led to increase ear yield. In other words, integrated treatments had better effect on yield than chemical and organic treatments. In addition, the highest canned harvest index (42.8 ton.ha-1 and ear harvest index (48.7 ton.ha-1 was related to 100 kg net nitrogen + 12 ton municipal solid waste compost (T8 treatments. Municipal solid waste compost and poultry manure in the 100 and 150 kg nitrogen levels caused to increase of canned harvest index and ear harvest index. This matter is indicative more effect of municipal solid waste compost than poultry manure on two indices.Generally, the combined use of organic manures and chemical fertilizers could be an appropriate method to increase sweet corn yield and soil fertility. According to the obtained results, T6 treatment can be recommended. Conclusion Based on the obtained results, it seems that single application of organic fertilizers cannot lead to maximum yield, therefore, to obtain the optimal yield integrated application of organic and chemical fertilizers (T6 can be recommended for farmers in the region.

Effect of dietary phosphorus, phytase, and 25-hydroxycholecalciferol on broiler chicken bone mineralization, litter phosphorus, and processing yields.

Science.gov (United States)

Angel, R; Saylor, W W; Mitchell, A D; Powers, W; Applegate, T J

2006-07-01

Three floor pen experiments (Exp) were conducted to evaluate low nonphytin P (NPP) concentrations and the NPP sparing effect of phytase (PHY) and 25-hydroxycholecalciferol (25D) on bone mineralization, bone breaking during commercial processing, litter P, and water-soluble P (WSP) concentrations. Tested treatments (TRT) were control, National Research Council NPP; University of Maryland (UMD) NPP; UMD + PHY, UMD NPP reduced by 0.064% NPP + 600 U of PHY/kg; UMD + PHY + 25D, UMD NPP reduced by 0.090% NPP + 600 U of PHY and 70 microg of 25D/kg; control + PHY mimicked the industry practice of diets by 0.1% when PHY is added; and negative control with 90% UMD NPP concentrations. UMD + PHY and control + PHY diets contained 600 U of PHY/kg, and UMD + PHY + 25D contained 600 U of PHY + 70 microg of 25D/kg. Performance results were presented separately. After each Exp, litter P and WSP were determined, and bone measurements were obtained on 8 or 10 broilers per pen. Tested TRT did not affect broiler BW. Femur ash weight of broilers fed the UMD and UMD + PHY + 25D was lower in all Exp compared with that of broilers fed the control diet. Femur ash was similar for control and UMD + PHY broilers, yet averaged over all Exp, UMD + PHY broilers consumed 39% less NPP and required less NPP per gram of femur ash than those on the control (4.87 and 7.77 g of NPP/g of ash, Exp 3). At the end of Exp 3, broilers were processed in a commercial facility. Despite reductions in NPP intake and bone mineralization, no differences were observed in measurements of economic importance (parts lost, carcass yield, and incidence of broken bones). The P excretion per bird was lowest for birds fed the UMD + PHY + 25D diet followed by those fed the UMD + PHY and negative control diets (10.44, 12.00, and 13.78 g of P/bird, respectively) and were highest for those fed the control diet (19.55 g of P/bird). These results suggest that feeding diets low in P together with PHY and 25D will not affect

Whey cheese: membrane technology to increase yields.

Science.gov (United States)

Riera, Francisco; González, Pablo; Muro, Claudia

2016-02-01

Sweet cheese whey has been used to obtain whey cheese without the addition of milk. Pre-treated whey was concentrated by nanofiltration (NF) at different concentration ratios (2, 2.5 and 2.8) or by reverse osmosis (RO) (2-3 times). After the concentration, whey was acidified with lactic acid until a final pH of 4.6-4.8, and heated to temperatures between 85 and 90 °C. The coagulated fraction (supernatant) was collected and freely drained over 4 h. The cheese-whey yield and protein, fat, lactose and ash recoveries in the final product were calculated. The membrane pre-concentration step caused an increase in the whey-cheese yield. The final composition of products was compared with traditional cheese-whey manufacture products (without membrane concentration). Final cheese yields found were to be between 5 and 19.6%, which are higher than those achieved using the traditional 'Requesón' process.

Radiant-and-plasma technology for coal processing

Directory of Open Access Journals (Sweden)

Vladimir Messerle

2012-12-01

Full Text Available Radiant-and-plasma technology for coal processing is presented in the article. Thermodynamic computation and experiments on plasma processing of bituminous coal preliminary electron-beam activated were fulfilled in comparison with plasma processing of the coal. Positive influence of the preliminary electron-beam activation of coal on synthesis gas yield was found. Experiments were carried out in the plasma gasifier of 100 kW power. As a result of the measurements of material and heat balance of the process gave the following integral indicators: weight-average temperature of 2200-2300 K, and carbon gasification degree of 82,4-83,2%. Synthesis gas yield at thermochemical preparation of raw coal dust for burning was 24,5% and in the case of electron-beam activation of coal synthesis gas yield reached 36,4%, which is 48% higher.

Experimental and computer simulation study of radionuclide yields in the ADT materials irradiated with intermediate energy protons

Energy Technology Data Exchange (ETDEWEB)

Titarenko, Yu.E.; Shvedov, O.V.; Batyaev, V.F. [Inst. for Theoretical and Experimental Physics, B. Cheremushkinskaya, Moscow (Russian Federation)] [and others

1998-11-01

The results of measurements and computer simulations of the yields of residual product nuclei in {sup 209}Bi, {sup 208,207,206,nat}Pb, {sup 65,63}Cu, {sup 59}Co thin targets irradiated by 0.13, 1.2 and 1.5 GeV protons are presented. The yields were measured by direct high-precision {gamma}-spectrometry. The process was monitored by the {sup 27}Al(p,x){sup 24}Na reaction. 801 cross sections are presented and used in comparisons between the reaction yields obtained experimentally and simulated by the HETC, GNASH, LAHET, INUCL, CEM95, CASCADE, NUCLEUS, YIELDX, QMD and ALICE codes. (author)

Isotope yield ratios as a probe of the reaction dynamics

International Nuclear Information System (INIS)

Trautmann, W.; Hildenbrand, K.D.; Lynen, U.; Mueller, W.F.J.; Rabe, H.J.; Sann, H.; Stelzer, H.; Trockel, R.; Wada, R.; Brummund, N.; Glasow, R.; Kampert, K.H.; Santo, R.; Eckert, E.M.; Pochodzalla, J.; Bock, I.; Pelte, D.

1987-04-01

Isotopically resolved yields of particles and complex fragments from 12 C and 18 O induced reactions on 53 Ni, 54 Ni, Ag, and 197 Au in the intermediate range of bombarding energies 30 MeV ≤ E/A ≤ 84 MeV were measured. The systematic variation of the deduced isotope yield ratios with projectile and target is used to determine the degree of N/Z equilibration achieved and to establish time scales for the reaction process. A quantum statistical model is employed in order to derive entropies of the emitting systems from the measured isotope yield ratios. (orig.)

Simulating the potential yield and yield gaps of sugar beet due to water and nitrogen limitations in Khorasan province using SUCROS model

Directory of Open Access Journals (Sweden)

R Deihimfard

2015-12-01

-specific parameters, and crop management information. Soil water module was used to determine soil water balance under water-limited conditions. Some questionnaires were then sent to extension agents to obtain information from the main sugar beet producing fields in each location. Results and discussion The SUCROSBEET model reasonably well predicted root yield across the study locations. The model could be used to simulate sugar beet yield under potential, water and nitrogen-limited situations. Simulation results of SUCROSBEET model showed that the lowest and highest sugar beet potential yield were obtained in Sabzevar (100 t.ha-1 and Neishaboor (137 t.ha-1, respectively. Total yield gap (the difference between potential and farmer’s yield ranged from 74 to 109 t.ha-1, in Sabzevar and Neishaboor, respectively. Despite the fact that most of the farms had been irrigated up to 20 times over seasons, there were still yield gap of an average 42 t.ha-1 due to water shortage. To reach the potential yield in the study locations, more than 2000 mm water is required in Sabsevar and Torbat-Jam and 1400 to 1500 mm in Ghoochan and Neishaboor, respectively. On average, to fill nitrogen-limited yield gap, 440 to 530 kg.ha-1 of nitrogen for sugar beet uptake are also required. However, the farmers in various locations have been able to apply only 50% of the sugar beet nitrogen demands during the past decade. The results of the current study also suggested that the farmer yields of about 16-48 t.ha-1in the irrigated locations across Khorasan province, were not constrained by low genetic yield potential. It is also needed to irrigate more than two times in some locations for reaching water-limited yield to potential one. Although there is a high potential for production of sugar beet (more than 130 t.ha-1, the ratio of yield production to water consumption (known as water productivity is not suitable in the study locations and production of sugar beet would not be cost-effective. Another issue which

Effects of cutting frequency on alfalfa yield and yield components in ...

African Journals Online (AJOL)

Effects of cutting frequency on alfalfa yield and yield components in Songnen Plain, Northeast China. J Chen, F Tang, R Zhu, C Gao, G Di, Y Zhang. Abstract. The productivity and quality of alfalfa (Medicago sativa L.) is strongly influenced by cutting frequency (F). To clarify that the yield and quality of alfalfa if affected by F, ...

Measure of the e+e-{yields}bb Cross Section at the LEP Energies; Medida de la seccion eficaz e''+e''-{yields}bb a las Energias de LEP

Energy Technology Data Exchange (ETDEWEB)

Arce Dubois, P.

1992-07-01

In the present work I analyse the data collected during 1990 by the L3 detector, situated in the electron-positron collider LEP. After selecting the events e''+e''-{yields} bb through their semileptonic decays into muons, I calculate the cross section for the process e''+e''- {yields} bb at different energy points around the mass of the vectorial boson Z, and I measure some parameters of the Standard Model, namely, the Br(b{yields}{mu} ),{gamma}{sub z}n-{yields}bb/{gamma}{sub z}n{yields}had and {gamma}{sub z}n{yields}bb{gamma}{sub z}n{yields}e''+e''-. (Author) 26 refs.

Performance Results of CMMI-Based Process Improvement

National Research Council Canada - National Science Library

Gibson, Diane L; Goldenson, Dennis R; Kost, Keith

2006-01-01

.... There now is evidence that process improvement using the CMMI Product Suite can result in improvements in schedule and cost performance, product quality, return on investment and other measures of performance outcome...

FAST PYROLYSIS PROCESS OF ORANGE SOLID WASTE. FACTORS INFLUENCE IN THE PROCESS

Directory of Open Access Journals (Sweden)

Leonardo Aguiar Trujillo

2015-04-01

Full Text Available The orange processing industry generates high volumes of solid residue. This residue has been used in animal feeding and biochemical processes. A possible energy use of the waste can be thermochemical fast pyrolysis process. The objective was to determine the influence of the heating rate and temperature in the process of rapid pyrolysis of orange solid residue. In the process a design, 2k full factorial experiment was used, evaluating the influence of the independent variables and its interactions on the answers, using a 95 % significance level. We found that temperature is the most significant influence on the responses parameter having significant influence on the yields to: gas, coal, tar and the calorific value of the gas and the heating rate does not influence the answers. Finally, the interaction affects the gas yield. The results obtained in this study are: Rgas (19 – 38 %, Rchar (25 – 42 %, Ralq (6 – 12 %, PCIgas entre (140 – 1050 kJ/m3N.

Impact of Inter-Row Spacing on Yield and Yield Components of several Annual Medics Species

Directory of Open Access Journals (Sweden)

Mahnaz BAGHERI

2010-12-01

Full Text Available A field study was conducted in Faculty of Agriculture, Tarbiat Modares University, Tehran, Iran to evaluate the effects of three within-row spacing treatments (20, 30 and 40 cm on forage and seed production of five species of annual medics (Medicago scutellata cv. Sava; M. littoralis cv. Herald; M. polymorpha cv. Santiago; M. minima cv. Orion and M. truncatula cv. Mogul. The experiment was carried out in Faculty of Agriculture, Tarbiat Modares University, Tehran, Iran. The results of the experiment indicated that M. polymorpha had the highest forage yield out of the highest plant population. Latter with average 443.09 Kg ha-1 and M. scutellata with average 409.99 Kg ha-1 produced the highest seed yield. Also, the last species with 1306.78 Kg ha-1 had the highest pod yields. The highest seed yield and pod yield were produced at 20 cm within-row spacing because there were not adequate plants for maximum seed and pod yields in 30 and 40 cm within-row spacing. The tested plant densities did not affect on seeds number per pod, 1000 seeds weight and seeds to burr pod weight ratio. The M. truncatula and M. minima have the highest seeds number per pod. In addition, M. scutellata had the highest 1000 seeds weight with an average of 12.57 g. The highest seeds to burr pod ratio was observed in M. polymorpha. The most pod numbers were obtained in 20 and 30 cm within-row spacing and M. polymorpha while, the least pod numbers was observed in M. scutellata. Plant densities did not affect on pod numbers of the mentioned species. The highest dry forage yield was produced in 20 cm within-row spacing. Among the tested tested species, M. truncatula had the highest forage yield with average 870.07 Kg ha-1. This experiment indicated that there is possibility for seed and forage production of tested annual medics in the mentioned zone with the considering suitable plant densities.

Estimation of heterosis in yield and yield attributing traits in single cross hybrids of maize

Directory of Open Access Journals (Sweden)

Hari Prasad Sharma

2016-12-01

Full Text Available A field experiment was conducted at National Maize Research Program, Rampur, Chitwan, Nepal during winter season from 6th October, 2015 to 5th March 2016 to estimate different heterosis on single cross maize hybrids . Thirteen maize hybrids were tested randomized complete block design with three replications. Hybrid namely RML-98/RL-105 gave the highest standard heterosis (57.5% for grain yield over CP-666 followed by RML-4/NML-2 (32.6%, RML-95/RL-105 (29% and RML-5/RL-105 (20.6%. The hybrid RML-98/RL-105 produced the highest standard heterosis (75.1% for grain yield over Rajkumar followed by RML-4/NML-2(50.2%, RML-95/RL-105(46.6%, RML-5/RL-105 and (35.7%. Mid and better parent heterosis were significantly higher for yield and yield attributes viz. ear length, ear diameter, no of kernel row per ear, no of kernel per row and test weight. The highest positive mid-parent heterosis for grain yield was found in RML-98/RL-105 followed by RML-5/RL-105, RML-95/RL-105, and RML-4/NML-2. For the grain yield the better parent heterosis was the highest in RML-98/RL-105, followed by RML-5/RL-105, RML-95/RL-105, and RML-4/NML-2. These results suggested that maize production can be maximized by cultivating hybrids namely RML-98/RL-105, RML-5/RL-105, RML-95/RL-105, and RML-4/NML-2 .

Effect of ecological management of weed control on economical income, yield and yield components of cotton (Gossypium hirsutum L.

Directory of Open Access Journals (Sweden)

A. Zare Feizabadi

2016-04-01

Full Text Available In order to compare of ecological management of weed control on economical income, yield and yield components of cotton (Gossypium hirsutum L., a Randomized Complete Block design with 12 treatments and four replications was conducted in Mahvelat of Khorasan Razavi province, Iran. Treatments consisted of weeding, harrowing, burning, two times weeding, weeding + harrowing, weeding + burning, harrowing + harrowing, harrowing + weeding, harrowing + burning, weeding+ harrowing+ burning, weed free and weedy as a check treatment. Investigated traits were plant height, number of boll in plant, 20 boll weight, 20 boll cotton lint weight, cotton lint yield per plant, cotton yield, number and biomass of weeds, outcome, net and gross income. The result showed that treatments had significant effect (p

Combining Costs and Benefits of Animal Activities to Assess Net Yield Outcomes in Apple Orchards.

Science.gov (United States)

Saunders, Manu E; Luck, Gary W

2016-01-01

Diverse animal communities influence ecosystem function in agroecosystems through positive and negative plant-animal interactions. Yet, past research has largely failed to examine multiple interactions that can have opposing impacts on agricultural production in a given context. We collected data on arthropod communities and yield quality and quantity parameters (fruit set, yield loss and net outcomes) in three major apple-growing regions in south-eastern Australia. We quantified the net yield outcome (accounting for positive and negative interactions) of multiple animal activities (pollination, fruit damage, biological control) across the entire growing season on netted branches, which excluded vertebrate predators of arthropods, and open branches. Net outcome was calculated as the number of undamaged fruit at harvest as a proportion of the number of blossoms (i.e., potential fruit yield). Vertebrate exclusion resulted in lower levels of fruit set and higher levels of arthropod damage to apples, but did not affect net outcomes. Yield quality and quantity parameters (fruit set, yield loss, net outcomes) were not directly associated with arthropod functional groups. Model variance and significant differences between the ratio of pest to beneficial arthropods between regions indicated that complex relationships between environmental factors and multiple animal interactions have a combined effect on yield. Our results show that focusing on a single crop stage, species group or ecosystem function/service can overlook important complexity in ecological processes within the system. Accounting for this complexity and quantifying the net outcome of ecological interactions within the system, is more informative for research and management of biodiversity and ecosystem services in agricultural landscapes.

Mathematical and statistical analysis of the effect of boron on yield parameters of wheat

Energy Technology Data Exchange (ETDEWEB)

Rawashdeh, Hamzeh [Water Management and Environment Research Department, National Center for Agricultural Research and Extension, P.O. Box 639, Baqa 19381 (Jordan); Sala, Florin [Soil Science and Plant Nutrition, Faculty of Agriculture, Banat University of Agricultural Sciences and Veterinary Medicine “Regele Mihai I al României” from Timişoara, Timişoara, 300645 (Romania); Boldea, Marius [Mathematics and Statistics, Faculty of Agriculture, Banat University of Agricultural Sciences and Veterinary Medicine “Regele Mihai I al României” from Timisoara, Timişoara, 300645 (Romania)

2015-03-10

The main objective of this research is to investigate the effect of foliar applications of boron at different growth stages on yield and yield parameters of wheat. The contribution of boron in achieving yield parameters is described by second degree polynomial equations, with high statistical confidence (p<0.01; F theoretical < F calculated, according to ANOVA test, for Alfa = 0.05). Regression analysis, based on R{sup 2} values obtained, made it possible to evaluate the particular contribution of boron to the realization of yield parameters. This was lower for spike length (R{sup 2} = 0.812), thousand seeds weight (R{sup 2} = 0.850) and higher in the case of the number of spikelets (R{sup 2} = 0.936) and the number of seeds on a spike (R{sup 2} = 0.960). These results confirm that boron plays an important part in achieving the number of seeds on a spike in the case of wheat, as the contribution of this element to the process of flower fertilization is well-known. In regards to productivity elements, the contribution of macroelements to yield quantity is clear, the contribution of B alone being R{sup 2} = 0.868.

Dispersive analysis of {omega}{yields}3{pi} and {phi}{yields}3{pi} decays

Energy Technology Data Exchange (ETDEWEB)

Niecknig, Franz; Kubis, Bastian; Schneider, Sebastian P. [Universitaet Bonn, Helmholtz-Institut fuer Strahlen- und Kernphysik (Theorie) and Bethe Center for Theoretical Physics, Bonn (Germany)

2012-05-15

We study the three-pion decays of the lightest isoscalar vector mesons, {omega} and {phi}, in a dispersive framework that allows for a consistent description of final-state interactions between all three pions. Our results are solely dependent on the phenomenological input for the pion-pion P-wave scattering phase shift. We predict the Dalitz plot distributions for both decays and compare our findings to recent measurements of the {phi}{yields}3{pi} Dalitz plot by the KLOE and CMD-2 collaborations. Dalitz plot parameters for future precision measurements of {omega}{yields}3{pi} are predicted. We also calculate the {pi}{pi} P-wave inelasticity contribution from {omega}{pi} intermediate states. (orig.)

Responses of Winter Wheat Yields to Warming-Mediated Vernalization Variations Across Temperate Europe

Directory of Open Access Journals (Sweden)

Xiuchen Wu

2017-10-01

Full Text Available Rapid climate warming, with much higher warming rates in winter and spring, could affect the vernalization fulfillment, a critical process for induction of crop reproductive growth and consequent grain filling in temperate winter crops. However, regional observational evidence of the effects of historical warming-mediated vernalization variations on temperate winter crop yields is lacking. Here, we statistically quantified the interannual sensitivity of winter wheat yields to vernalization degree days (VDD during 1975–2009 and its spatial relationship with multi-year mean VDD over temperate Europe (TE, using EUROSTAT crop yield statistics, observed and simulated crop phenology data and gridded daily climate data. Our results revealed a pervasively positive interannual sensitivity of winter wheat yields to variations in VDD (γVDD over TE, with a mean γVDD of 2.8 ± 1.5 kg ha−1 VDD−1. We revealed a significant (p < 0.05 negative exponential relationship between γVDD and multi-year mean VDD for winter wheat across TE, with higher γVDD in winter wheat planting areas with lower multi-year mean VDD. Our findings shed light on potential vulnerability of winter wheat yields to warming-mediated vernalization variations over TE, particularly considering a likely future warmer climate.

Yield and Yield Components of Vetch (Vigna radiata as Affected by the Use of Vermicompost and Phosphate Bio-fertilizer

Directory of Open Access Journals (Sweden)

Mohammad Mehdi Rahimi

2016-06-01

Full Text Available To evaluate the effects different levels of phosphate biofertilizer barvar-2 and vermi compost on yield and yield components of vetch plant (Vigna radiata L.in Yasouj a factorial experiments was performed in completely randomized design in crop year of 2013. Experimental treatments were phosphate biofertilizer barvar-2 at 3 levels (0, 50, 100 gram per hectare and vermicompost at 4 levels (0, 10, 20, 30 ton per hectare. In this study stem height, root length, biological yield, seed yield and harvest index was measured. ANOVA and comparison of means showed that vermicompost significantly increased stem height, economic and biological yields. Results, also, indicated that highest yield and biomass, 4.3 and 18.8 g/plant, observed respectively when 100 g/ha of barvar-2 and 30 t/ha of vermi compost were used. Using both of phosphate biofertilizer barvar-2 and vermicompost was better than their individnal usage. This indicates that combined use of these 2 factors would produce higher yield. It can be concluded that application of 100 g/ha of barvar-2 and 30 t/ha of vermicompost would a proper recommendation.

Effect of different intercropping patterns on yield and yield components of dill and fenugreek

Directory of Open Access Journals (Sweden)

Behzad Shokati

2014-12-01

Full Text Available A field experiment was conducted based on randomized complete blocks design (RCBD in three replications during 2011 at the research farm of university of Tabriz, Iran. In this study two medicinal plants, dill (Anethum graveolens L. and fenugreek (Trigonella foenum-graecum intercropped at different additive (1:20, 1:40 and 1:60 and different replacement (1:1, 1:2 and 1:3 series. Results showed that dill plant at additive treatment especially in 1:20 and 1:60 series had maximum plant fresh and dry weights, umbels per plant, 1000 seed weight, seeds per plant, biological yield and harvest index. However, fenugreek plant at replacement treatment especially in 1:3 and 1:2 series had maximum biological yield, pod in main stem, pod in branches, seeds per pod, seed weights and grain yield. Fenugreek as a medicinal, forage and legume crop promote dill grows characters and could be an effective plant in intercropping systems.

The Effect of Nitroxin Biofertilizer and Foliar Applicatin of Micronutrients Time Consumption on Yield and Yield Components of New Wheat Cultivars under Khorramabad Climatic Conditions

Directory of Open Access Journals (Sweden)

A. Vaez

2016-02-01

revealed that there was a significant relationship between foliar application of micronutrients and nitroxin biofertilizer of grain yield, biological yield, harvest index, 1000- grain weight, spike number per m-2, grain number per spike and spikelet number per spike of wheat. The most positive relationship was related to grain and the applying fertilizer treatment of the grain insemination with nitroxin biofertilizer and foliar application of micronutrients at the heading stage. The cultivar factor has also a positive effect on the surveying characteristics such as grain yield, harvest index, 1000-grain weight, spike number per m-2, grain number per spike and spikelet number per spike. The most positive relationship was related to grain and the applying fertilizer treatment of the grain insemination with nitroxin biofertilizer and foliar application of micro-nutrients at the heading stage and the treatment of the Parsi cultivar with an average of 6844/3kg/ha-1. Considering the significant increase in the grain yield, the applying fertilizer treatment of the grain insemination with nitroxin biofertilizer and foliar application of micronutrients at the heading stage and the treatment of the Parsi cultivar were proposed for Khorramabad Situation. Conclusions In this study, significant differences between the various levels and stages of foliar fertilizer, bio Nitroxin micronutrients showed that appropriate use of these two factors can result in maximum performance of the wheat. The process of spraying micronutrients had a significant effect on grain yield. The highest yield of seed was obtained in inoculation with the combined application of organic fertilizer and foliar Nitroxin micronutrients in the treatment of stage and heading to the Persian superior varieties of grain yield. The results of this experiment showed that the use of micronutrients can improve agronomic characteristics and increase the grain yield. Micronutrient fertilizers sprayed on soil conservation

The Effect of Vesicular Arbuscular Mycorrhizal (VAM on Yield and Yield Components of Three Sorghum (Sorghum bicolor Cultivars

Directory of Open Access Journals (Sweden)

A. Mehraban

2012-10-01

Full Text Available To evaluate the influence of vesicular arbuscular mycorrhizal (VAM on yield and yield components of three sorghum cultivars, a factorial experiment based randomized complete block design with four replications was carried out in 2007, at the Agricultural Research Center of Zahak, Iran. The treatments were different mycorrhiza species in three levels: without mycorrhiza (M1, Glomus etanicatum (M2 and G. mosseae(M3 and three cultivars of sorghum: local cultivars (C1, KGS25 (C2 and KGS29 (C3. The results showed that all of the traits measured were increased by inoculation of cultivars with mycorrhiza. The highest plant height (165.1 cm, stem diameter (1.61 cm, flag leaf length (27.22 cm, flag leaf width (3.67 cm and ear width (5.00 cm was obtained by inoculation of seed with Glumus etanicatum, and highest ear length (19.21 cm, ear number (2.51, seed number per ear (10252.11, 1000-seed weight (17.56 g and grain yield (1967.32 kg/ha by using Glumus mossea. The highest leaf width and length belonged to local cultivar, and the highest seed yield to KGS 29 cultivar. However, differences of other traits among sorghum cultivars were not significant. Based on the experimental results it can be concluded that highest grain yield may be obtained by inoculating seeds of KGS 29 with Glumus mossea.

Controls and forecasts of nitrate yields in forested watersheds: A view over mainland Portugal.

Science.gov (United States)

Pacheco, F A L; Santos, R M B; Sanches Fernandes, L F; Pereira, M G; Cortes, R M V

2015-12-15

A study on nitrate yields was conducted in forested watersheds of mainland Portugal. The prime goal was to rank parameters in descending order of their contribution to the export of nitrate towards streams and lakes. To attain the goal, variables like soil loss, rainfall intensity, topography, soil type, forest composition and environmental disturbances such as hardwood harvesting or wildfires were organized in a conceptual yield model. Because some parameters were potentially collinear, a robust multivariate statistical technique was selected to execute the conceptual model and perform the aforementioned ranking, namely Partial Least Squares (PLS) regression. This technique was tested with a sample of 60 forested watersheds (>70% of forest occupation), being subject to a double-validation process to ensure prediction capability. According to final regression coefficients, soil erosion seems to regulate nitrate distribution across the basins, because soil loss and type, rainfall intensity and topography explained around 60% of nitrate yield variance. The major importance of erosion is followed by a moderate role of biochemical processes such as nitrification or nutrient uptake, which accounted for approximately 15% of nitrate yield variance. In this case, deciduous forests and scrubland seem to behave as net sinks of nitrate while coniferous and mixed forests seem to act dually, as net sources or sinks. The least important parameters are the environmental disturbances, explaining no more than 5% of nitrate yield variance. The results of PLS regression were coupled in a scenario analysis with measures designed to protect soil from erosion and surface water from eutrophication. These interventions are to be implemented until 2045, according to regional plans of forest management. Considering the key role of erosion in explaining nitrate dynamics across the catchments, it was not surprising to verify that soil protection measures may reduce nitrate yields by some 35

The Effect of Different Fertilizer Management on Yield and Yield Components of Black Seed (Nigella sativa L.

Directory of Open Access Journals (Sweden)

P rezvani moghaddam

2017-08-01

, manure + nitroxin + mycorrhizae, manure + biosulfur and control. Plots were designed with 4 m long and 2 m width (8 m2, 0.5 m apart each other. Seed sowing was done at 18th March on both sides of the furrows. Final plant density was determined equal to 200 plants m-2. At maturity stage, number of branch per plant, number of follicle per plant, seed weight per follicle and 1000- seed weight were determined based on randomly selection of eight plant. Moreover, grain and biological yields as well as harvest index of black seed were measured by considering the side effects. For statistical analysis, Duncan multiple range test (p≤0.05 was used to separate the experimental means using SAS 9.1 software. Results and discussion According to the results, effects of urea and cow manure treatments on grain and biological yields of black seed were significant. However, cow manure, in comparison with urea fertilizer, had more significant effects in increasing mentioned traits of black seed. For instance, cow manure treatment increased grain yield by 25%, compared with urea treatment. Generally, advantages of manure in comparison with chemical fertilizer can be related to the slow and more balanced release of nutrient contents as well as improving the physical and chemical soil characteristics over growing season. On the other hand, the results showed that biological fertilizers had no effects in increasing grain and biological yields of black seed, except biosulfur treatment. From the results, there was a positive correlation between 1000- seed weight with grain yield. Moreover, similar correlations were found between number of branch per plant and grain yield, number of follicle per plant and grain yield as well as seed weight per follicle and grain yield. Nonetheless, relationship between harvest index and grain yield was determined as a negative correlation. These results are in agreement with those of Moradi et al. (2010 who found a significant decrease in harvest index of

High ethanol yields using Aspergillus oryzae koji and corn media

Energy Technology Data Exchange (ETDEWEB)

Ziffer, J.; Iosif, M.C.

1982-01-01

High ethanol and stillage solids were achieved using whole corn mashes. Ethanol yields of 14% (98.5% of theory) and stillage levels of approximately 23% were obtained in 74-90 hours using mild acid pretreatment with A. oryzae wheat bran koji saccharification. High ethanol yields were also obtained with bacterial amylase, instead of the acid treatment, when the sterilization step was omitted. The implications of ethanol fermentation process modifications are explored.

Quantifying yield gaps in wheat production in Russia

International Nuclear Information System (INIS)

Schierhorn, Florian; Prishchepov, Alexander V; Koch, Friedrich J; Müller, Daniel; Faramarzi, Monireh

2014-01-01

Crop yields must increase substantially to meet the increasing demands for agricultural products. Crop yield increases are particularly important for Russia because low crop yields prevail across Russia’s widespread and fertile land resources. However, reliable data are lacking regarding the spatial distribution of potential yields in Russia, which can be used to determine yield gaps. We used a crop growth model to determine the yield potentials and yield gaps of winter and spring wheat at the provincial level across European Russia. We modeled the annual yield potentials from 1995 to 2006 with optimal nitrogen supplies for both rainfed and irrigated conditions. Overall, the results suggest yield gaps of 1.51–2.10 t ha −1 , or 44–52% of the yield potential under rainfed conditions. Under irrigated conditions, yield gaps of 3.14–3.30 t ha −1 , or 62–63% of the yield potential, were observed. However, recurring droughts cause large fluctuations in yield potentials under rainfed conditions, even when the nitrogen supply is optimal, particularly in the highly fertile black soil areas of southern European Russia. The highest yield gaps (up to 4 t ha −1 ) under irrigated conditions were detected in the steppe areas in southeastern European Russia along the border of Kazakhstan. Improving the nutrient and water supply and using crop breeds that are adapted to the frequent drought conditions are important for reducing yield gaps in European Russia. Our regional assessment helps inform policy and agricultural investors and prioritize research that aims to increase crop production in this important region for global agricultural markets. (letter)

Preliminary time-phased TWRS process model results

International Nuclear Information System (INIS)

Orme, R.M.

1995-01-01

This report documents the first phase of efforts to model the retrieval and processing of Hanford tank waste within the constraints of an assumed tank farm configuration. This time-phased approach simulates a first try at a retrieval sequence, the batching of waste through retrieval facilities, the batching of retrieved waste through enhanced sludge washing, the batching of liquids through pretreatment and low-level waste (LLW) vitrification, and the batching of pretreated solids through high-level waste (HLW) vitrification. The results reflect the outcome of an assumed retrieval sequence that has not been tailored with respect to accepted measures of performance. The batch data, composition variability, and final waste volume projects in this report should be regarded as tentative. Nevertheless, the results provide interesting insights into time-phased processing of the tank waste. Inspection of the composition variability, for example, suggests modifications to the retrieval sequence that will further improve the uniformity of feed to the vitrification facilities. This model will be a valuable tool for evaluating suggested retrieval sequences and establishing a time-phased processing baseline. An official recommendation on tank retrieval sequence will be made in September, 1995

Effect of biochar on aerobic processes, enzyme activity, and crop yields in two sandy loam soils

DEFF Research Database (Denmark)

Sun, Zhencai; Bruun, Esben; Arthur, Emmanuel

2014-01-01

Biochar added to agricultural soils may sequester carbon and improve physico-chemical conditions for crop growth, due to effects such as increased water and nutrient retention in the root zone. The effects of biochar on soil microbiological properties are less certain. We addressed the effects...... of wood-based biochar on soil respiration, water contents, potential ammonia oxidation (PAO), arylsulfatase activity (ASA), and crop yields at two temperate sandy loam soils under realistic field conditions. In situ soil respiration, PAO, and ASA were not significantly different in quadruplicate field...... plots with or without biochar (20 Mg ha−1); however, in the same plots, volumetric water contents increased by 7.5 % due to biochar (P = 0.007). Crop yields (oat) were not significantly different in the first year after biochar application, but in the second year, total yields of spring barley increased...

Study of pp{yields}pp{eta} reaction at threshold; Etude de la reaction pp{yields}pp{eta} au seuil

Energy Technology Data Exchange (ETDEWEB)

Taleb, A

1994-11-01

The {eta} production has been studied through the pp {yields} pp{eta} reaction at threshold. Data were taken at the Synchrotron of the ``Laboratoire National Saturne``. The detection in coincidence of the two protons scattered near 0 deg and analysed with the magnetic spectrometer SPES3 allows the reconstruction of missing mass spectra for the {eta} signature. A simulation program which takes into account all the experimental set up characteristics has been realized and tested through the pp {yields} d{pi}{sup +} reaction detected simultaneously with pp {yields} pp{eta}. The generated proton momentum spectra for pp {yields} pp{eta} show a pronounced {eta} mass dependence. This characteristic, connected to the kinematical properties of pp {yields} pp{eta} at threshold, is used to extract the mass of the meson {eta}. The obtained value, m{sub {eta}} = 547.65 {+-} 0.18 MeV, is in good agreement with measurement done recently through the pd {yields} {sup H}e{eta} reaction. The total cross section {sigma}{sub t} of pp {yields} pp{eta} measured at 1260, 1265 and 1300 MeV presents a strong energy dependence. This cross section increases less with energy than the phase-space. The influence of p-p and {eta}-p final state interactions in our measurements is studied. Our results are compared with theoretical predictions and assess the dominant character of the baryonic resonance N{sup *}(1535) in the {eta} mechanism production at threshold. These experimental results give an energy dependence which is not well reproduced by the theoretical predictions. This discrepancy could be an incorrect description of the {eta}-p interaction in the models. (author). 48 refs., 60 figs., 15 tabs.

Walnut and almond oil screw-press extraction at industrial scale: Effects of process parameters on oil yield and quality

Directory of Open Access Journals (Sweden)

M. L. Martínez

2018-01-01

Full Text Available Walnut and almond kernels are highly nutritious mainly due to their high oil contents. In this study, 32 factorial experimental designs were used to optimize processes for oil extraction by screw-pressing at industrial scale. Experimental designs included seed moisture content (SMC, and restriction die (RD as the main processing parameters. Theoretical models were scanned against experimental data in order to optimize oil extraction conditions. The response variables analyzed were oil yield (OY, fine solid content (FC in oil, and oil quality parameters. Fitted models for OY indicated maximum predicted values similar to the highest experimental values. Walnut oil extractions showed a maximum OY (84.5 ± 2.3 % at 7.21% SMC, and 10 mm RD. For almond kernels, maximum OY (71.9 ± 3.5% was obtained at 9.42% SMC, and 12 mm RD. Chemical quality parameters from both oils were in the ranges stated in Codex (FAO/WHO standards for virgin (non-refined oils.

Walnut and almond oil screw-press extraction at industrial scale: Effects of process parameters on oil yield and quality

International Nuclear Information System (INIS)

Martínez, M. L.; Bordón, M.G.; Bodoira, R. M.; Penci, M.C.; Ribotta, P.D.; Maestri, D.M.

2017-01-01

Walnut and almond kernels are highly nutritious mainly due to their high oil contents. In this study, 32 factorial experimental designs were used to optimize processes for oil extraction by screw-pressing at industrial scale. Experimental designs included seed moisture content (SMC), and restriction die (RD) as the main processing parameters. Theoretical models were scanned against experimental data in order to optimize oil extraction conditions. The response variables analyzed were oil yield (OY), fine solid content (FC) in oil, and oil quality parameters. Fitted models for OY indicated maximum predicted values similar to the highest experimental values. Walnut oil extractions showed a maximum OY (84.5 ± 2.3 %) at 7.21% SMC, and 10 mm RD. For almond kernels, maximum OY (71.9 ± 3.5%) was obtained at 9.42% SMC, and 12 mm RD. Chemical quality parameters from both oils were in the ranges stated in Codex (FAO/WHO) standards for virgin (non-refined) oils. [es

Bond yield curve construction

Directory of Open Access Journals (Sweden)

Kožul Nataša

2014-01-01

Full Text Available In the broadest sense, yield curve indicates the market's view of the evolution of interest rates over time. However, given that cost of borrowing it closely linked to creditworthiness (ability to repay, different yield curves will apply to different currencies, market sectors, or even individual issuers. As government borrowing is indicative of interest rate levels available to other market players in a particular country, and considering that bond issuance still remains the dominant form of sovereign debt, this paper describes yield curve construction using bonds. The relationship between zero-coupon yield, par yield and yield to maturity is given and their usage in determining curve discount factors is described. Their usage in deriving forward rates and pricing related derivative instruments is also discussed.

Response of maize varieties to nitrogen application for leaf area profile, crop growth, yield and yield components

International Nuclear Information System (INIS)

Akmal, M.; Hameed-urRehman; Farhatullah; Asim, M.; Akbar, H.

2010-01-01

An experiment was conducted at NWFP Agricultural University, Peshawar, to study maize varieties and Nitrogen (N) rates for growth, yield and yield components. Three varieties (Azam, Jalal and Sarhad white) and three N rates (90, 120, 150, kg N ha/sup -1/) were compared. Experiment was conducted in a Randomized Complete Block design; split plot arrangement with 4 replications. Uniform and recommended cultural practices were applied during the crop growth. The results revealed that maize variety 'Jalal' performed relatively better crop growth rate (CGR) and leaf area profile (LAP) at nodal position one to six as compared to the other two varieties (Sarhad white and Azam). This resulted higher radiation use efficiency by the crop canopy at vegetative stage of development and hence contributed higher assimilates towards biomass production. Heavier grains in number and weight were due to higher LAP and taller plants of Jalal which yielded higher in the climate. Nitrogen applications have shown that maize seed yield increase in quadratic fashion with increased N to a plateau level. Considering soil fertility status and cropping system, the 150 kg ha/sup -1/ N application to maize variety Jalal in Peshawar is required for maximum biological and seed production. (author)

Cosmic-Ray Nucleosynthesis of p-nuclei: Yields and Routes

Science.gov (United States)

Kusakabe, Motohiko; Mathews, Grant J.

2018-02-01

We investigate the cosmic-ray nucleosynthesis (CRN) of proton-rich stable nuclides (p-nuclides). We calculate the cosmic-ray (CR) energy spectra of heavy nuclides with mass number A=[74,209], taking into account the detailed nuclear spallation, decay, energy loss, and escape from the Galaxy during the CR propagation. We adopt the latest semiempirical formula SPACS for the spallation cross sections and the latest data on nuclear decay. Effective electron-capture decay rates are calculated using the proper cross sections for recombination and ionization in the whole CR energy region. Calculated CR spectral shapes vary for different nuclides. Abundances of proton-rich unstable nuclides increase in CRs with increasing energy relative to those of other nuclides. Yields of the primary and secondary spallation processes and differential yields from respective seed nuclides are calculated. We find that the CR energy region of ≤slant { \\mathcal O }(100) MeV/nucleon predominantly contributes to the total yields. The atomic cross sections in the low-energy range adopted in this study are then necessary. Effects of CRN on the Galactic chemical evolution of p-nuclides are calculated. Important seed nuclides are identified for respective p-nuclides. The contribution of CRN is significant for 180m Ta, accounting for about 20% of the solar abundance. About 87% of the 180m Ta CRN yield can be attributed to the primary process. The most important production routes are reactions of 181Ta, 180Hf, and 182W. CRN yields of other p-nuclides are typically about { \\mathcal O }(10‑4–10‑2) of solar abundances.

7755 EFFECT OF NPK FERTILIZER ON FRUIT YIELD AND YIELD ...

African Journals Online (AJOL)

Win7Ent

2013-06-03

Jun 3, 2013 ... peasant farmers in Nigeria. With the increased ... did not significantly (p=0.05) increase the fruit yield nor the seed yield. Key words: NPK fertilizer, Fruit ..... SAS (Statistical Analysis System) Version 9.1. SAS Institute Inc., Cary, ...

Investigating the Effect of Cultivate Lines Direction, Bio-Fertilizer Nitroxin and Superabsorbent Materials on Yield and Yield Components of Broad Leaf Vetch (Vicia narbonensis

Directory of Open Access Journals (Sweden)

E Latifinia

2017-12-01

polymer was 100 kg/ha at planting time under cultivating lines under the seed at a distance of 2 cm. In this experiment, the pesticide leaf was grown with 97% volatility and 1000-weight weight of 109.56 grams with plant density of 200 plants per square meter. The raw data obtained from the measurement of each of the traits tested after the normal distribution was analyzed using MSTAT-C software. Comparisons of the meanings were compared using Duncan's multiple range tests at probability levels (1 and 5%. Results and Discussion The results showed that using nitroxin fertilizer on stem diameter, number of pods per plant, number of seeds per pod, 1000 seed weight, grain yield, biological yield and harvest index had significant effect. Probably the secretion of plant growth hormones due to the presence of stabilizing bacteria in nitroxin and the gradual release of substances has been shown to stimulate growth and increase yield. Studies have shown that the use of nitroxin biological fertilizer has increased biological yield and seed yield in rapeseed plants due to the availability of food in the critical stages of plant growth. Therefore, increasing the amount of nutrients available to the plant, especially nitrogen, stimulates plant growth and increases dramatically and increases yield. Also, plant height, stem diameter, grain yield, biological yield and harvest index increased in superabsorbent application than control. Super absorbent polymer has reduced the negative effects of drought stress and increased yield. Under stress conditions, the plant faces a severe decrease in cellular inflammation, cell growth and division, which leads to a decrease in vegetative growth while the use of superabsorbent prevents stress and increases vegetative growth. The results of reaserch on corn showed that the use of superabsorbent increased plant yield, which was consistent with the results of this study (Yousefifard et al., 2011. North-South cultivation direction had a positive effect

Biogas production from high-yielding energy crops in boreal conditions

Energy Technology Data Exchange (ETDEWEB)

Seppala, M.

2013-11-01

In this thesis, the methane production potential of traditional and novel energy crops was evaluated in boreal conditions. The highest methane yield per hectare was achieved with maize (4 000-9 200 m{sup 3}CH{sub 4} ha{sup -1} a{sup -1}) and the second highest with brown knapweed (2 700-6 100 m{sup 3}CH{sub 4} ha{sup -1} a{sup -1}). Recently, the most feasible energy crop, grass, produced 1 200-3 600 m{sup 3}CH{sub 4} ha{sup -1} a{sup -1}. The specific methane yields of traditional and novel energy crops varied from 170-500 l kg{sup -1} volatile solid (VS). The highest specific methane yields were obtained with maize, while the novel energy crops were at a lower range. The specific methane yields decreased in the later harvest time with maize and brown knapweed, and the specific methane yield of the grasses decreased from the 1st to 2nd harvests. Maize and brown knapweed produced the highest total solid (TS) yields per hectare 13-23 tTS ha{sup -1}, which were high when compared with the TS yields of grasses (6-13 tTS ha{sup -1}). The feasibility of maize and brown knapweed in co-digestion with liquid cow manure, in continuously stirred tank reactors (CSTR), was evaluated. According to the CSTR runs, maize and brown knapweed are suitable feeds and have stable processes, producing the highest methane yields (organic loading rate 2 kgVS m{sup -3}d{sup -1}), with maize at 259 l kgVS{sup -1} and brown knapweed at 254 l kgVS{sup -1}. The energy balance (input/output) of the cultivation of the grasses, maize and brown knapweed was calculated in boreal conditions, and it was better when the digestate was used as a fertilizer (1.8-4.8 %) than using chemical fertilizers (3.7-16.2 %), whose production is the most energy demanding process in cultivation. In conclusion, the methane production of maize, grasses and novel energy crops can produce high methane yields and are suitable feeds for anaerobic digestion. The cultivation managements of maize and novel energy crops for

Dry processing versus dense medium processing for preparing thermal coal

CSIR Research Space (South Africa)

De Korte, GJ

2013-10-01

Full Text Available of the final product. The separation efficiency of dry processes is, however, not nearly as good as that of dense medium and, as a result, it is difficult to effectively beneficiate coals with a high near-dense content. The product yield obtained from some raw...

Biogas generation in landfills. Equilibria, rates and yields

Energy Technology Data Exchange (ETDEWEB)

Aakesson, M

1997-05-01

Landfilling in `cells` has become more common in recent years. Different waste streams are guided to different cells, among which the biocell is a landfill designed for biogas production. In this thesis, the dependence of biogas generation on waste composition was investigated. Six 8,000 m{sup 3} test cells, with contents ranging from mainly commercial waste to pure domestic waste and equipped with gas extraction systems and bottom plastic liners, were monitored for seven years. Great emphasis was given to the characterization of conversion processes and governing mechanism in the topics of bio-energetics, kinetics and capacities. A thermodynamic model, in which the oxidations of volatile fatty acids (VFA) (2yields (in this study found to be 150-200 and 40-70 Nm{sup 3}/dry tonne, respectively), the possible nutritional limitation was investigated. Pools and emissions of chemical oxygen demand, N, P and K were quantified. Biomass pools were estimated from methane yields, growth yield coefficients, and bacterial mineral contents. However, results from commercial waste test cells showed that the assimilation of P exceeded the refuse content, which suggests the turnover of microbial biomass and questions the notion of nutritional limitation. In sum, the results showed that the advantages of a reduced content of readily biodegradable material, achieved by guidance or pretreatment, encompass several aspects of the performance. 84 refs, 6 figs, 1 tab

Experimental study of mixing and asymmetry in Z {yields} b anti b

Energy Technology Data Exchange (ETDEWEB)

Zwaan, B.C.C. van der

1995-12-14

The subject of this thesis is the measurement of the mixing in the B{sup 0} anti B{sup 0} system and the forward-backward asymmetry in the electroweak process e{sup +}e{sup -}{yields}Z{yields}b{sup b} anti. These measurements yield a test of the Standard Model. The experiment is performed with data taken by the L{sub 3} detector, one of the four detectors along the LEP electron-positron storage ring at CERN. (orig./HSI).

The effects of vermicompost and chemical fertilizers on yield and yield components of marshmallow (Altheae officinalis L.

Directory of Open Access Journals (Sweden)

A.A. Sadeghi

2016-05-01

Full Text Available In order to investigate the effects of vermicompost and chemical fertilizers on growth characteristics, yield and yield components of marshmallow (Altheaeofficinalis L., a field experiment was conducted as factorial layout based on a randomized complete block design with three replications at Faculty of Agriculture, Ferdowsi University of Mashhad, Iran, during growing season of 2012. Experimental treatments were designed based on 3 levels of vermicompost (0, 5 and 10 t ha-1 and 5 levels of nitrogen fertilizer (0, 25, 50, 75 and 100% of 200 kg N ha-1. Results indicated that applied vermicompost had significant effects on increasing leaf area, flower weight per plant and grain yield of marshmallow. Flower weight per plant and grain yield of marshmallow was increased by 2 to 3 times by applying vermicompost at 10 t. ha-1, as compared to control treatment. In addition, nitrogen fertilizer had a significant effect on increasing flower weight per plant and grain, mucilage and oil yields of marshmallow. It seems that applying vermicompost can be suitable strategy in reducing the problems caused by excessive using of chemical fertilizers.

Response of Yield and Yield Components of Tef [Eragrostis Tef ...

African Journals Online (AJOL)

The partial budget analysis also indicates that applications of 46 kg. N ha-1 and 10 kg P ha-1 are ..... (1994) indicated that where the grain yield response is negative, yield reduction is primarily caused by a .... An Economic Training. Manual.

Final NOMAD results on {nu}{sub {mu}}{yields}{nu}{sub {tau}} and {nu}{sub e}{yields}{nu}{sub {tau}} oscillations including a new search for {nu}{sub {tau}} appearance using hadronic {tau} decays

Energy Technology Data Exchange (ETDEWEB)

Astier, P.; Autiero, D.; Baldisseri, A.; Baldo-Ceolin, M.; Banner, M.; Bassompierre, G.; Benslama, K.; Besson, N.; Bird, I.; Blumenfeld, B.; Bobisut, F.; Bouchez, J.; Boyd, S.; Bueno, A.; Bunyatov, S.; Camilleri, L.; Cardini, A.; Cattaneo, P.W.; Cavasinni, V.; Cervera-Villanueva, A.; Chukanov, A.; Collazuol, G.; Conforto, G.; Conta, C.; Contalbrigo, M.; Cousins, R.; Daniels, D.; Degaudenzi, H.; Del Prete, T.; De Santo, A.; Dignan, T.; Di Lella, L.; Couto e Silva, E. do; Dumarchez, J.; Ellis, M.; Feldman, G.J.; Ferrari, R.; Ferrere, D.; Flaminio, V.; Fraternali, M.; Gaillard, J.-M.; Gangler, E.; Geiser, A.; Geppert, D.; Gibin, D.; Gninenko, S.; Godley, A.; Gomez-Cadenas, J.-J.; Gosset, J.; Goessling, C.; Gouanere, M.; Grant, A.; Graziani, G.; Guglielmi, A.; Hagner, C.; Hernando, J.; Hubbard, D.; Hurst, P.; Hyett, N.; Iacopini, E.; Joseph, C.; Juget, F.; Kirsanov, M.; Klimov, O.; Kokkonen, J.; Kovzelev, A.; Krasnoperov, A.; Kustov, D.; Kuznetsov, V.E.; Lacaprara, S.; Lachaud, C.; Lakic, B.; Lanza, A.; La Rotonda, L.; Laveder, M.; Letessier-Selvon, A.; Levy, J.-M.; Linssen, L.; Ljubic, A.; Long, J.; Lupi, A.; Marchionni, A.; Martelli, F.; Mechain, X.; Mendiburu, J.-P.; Meyer, J.-P.; Mezzetto, M.; Mishra, S.R.; Moorhead, G.F.; Naumov, D.; Nedelec, P.; Nefedov, Yu.; Nguyen-Mau, C.; Orestano, D.; Pastore, F.; Peak, L.S.; Pennacchio, E.; Pessard, H.; Petti, R. E-mail: roberto.petti@cern.ch; Placci, A.; Polesello, G.; Pollmann, D.; Polyarush, A.; Popov, B.; Poulsen, C.; Rico, J.; Riemann, P.; Roda, C.; Rubbia, A.; Salvatore, F.; Schahmaneche, K.; Schmidt, B.; Schmidt, T.; Sconza, A.; Sevior, M.; Sillou, D.; Soler, F.J.P.; Sozzi, G.; Steele, D.; Stiegler, U.; Stipc, M.; Stolarczyk, Th.; Tareb-Reyes, M.; Taylor, G.N.; Tereshchenko, V.; Toropin, A.; Touchard, A.-M.; Tovey, S.N.; Tran, M.-T.; Tsesmelis, E.; Ulrichs, J.; Vacavant, L.; Valdata-Nappi, M.; Valuev, V.; Vannucci, F.; Varvell, K.E.; Veltri, M.; Vercesi, V.; Vidal-Sitjes, G.; Vieira, J.-M.; Vinogradova, T.[and others

2001-09-17

Results from the {nu}{sub {tau}} appearance search in a neutrino beam using the full NOMAD data sample are reported. A new analysis unifies all the hadronic {tau} decays, significantly improving the overall sensitivity of the experiment to oscillations. The 'blind analysis' of all topologies yields no evidence for an oscillation signal. In the two-family oscillation scenario, this sets a 90% CL allowed region in the sin{sup 2}2{theta}{sub {mu}}{sub {tau}}-{delta}m{sup 2} plane which includes sin{sup 2}2{theta}{sub {mu}}{sub {tau}}<3.3x10{sup -4} at large {delta}m{sup 2} and {delta}m{sup 2}< 0.7 eV{sup 2}/c{sup 4} at sin{sup 2}2{theta}{sub {mu}}{sub {tau}}=1. The corresponding contour in the {nu}{sub e}{yields}{nu}{sub {tau}} oscillation hypothesis results in sin{sup 2}2{theta}{sub e{tau}}<1.5x10{sup -2} at large {delta}m{sup 2} and {delta}m{sup 2}<5.9 eV{sup 2}/c{sup 4} at sin{sup 2}2{theta}{sub e{tau}}=1. We also derive limits on effective couplings of the {tau} lepton to {nu}{sub {mu}} or {nu}{sub e}.

Heterologous Production and Yield Improvement of Epothilones in Burkholderiales Strain DSM 7029.

Science.gov (United States)

Bian, Xiaoying; Tang, Biao; Yu, Yucong; Tu, Qiang; Gross, Frank; Wang, Hailong; Li, Aiying; Fu, Jun; Shen, Yuemao; Li, Yue-Zhong; Stewart, A Francis; Zhao, Guoping; Ding, Xiaoming; Müller, Rolf; Zhang, Youming

2017-07-21

The cloning of microbial natural product biosynthetic gene clusters and their heterologous expression in a suitable host have proven to be a feasible approach to improve the yield of valuable natural products and to begin mining cryptic natural products in microorganisms. Myxobacteria are a prolific source of novel bioactive natural products with only limited choices of heterologous hosts that have been exploited. Here, we describe the use of Burkholderiales strain DSM 7029 as a potential heterologous host for the functional expression of myxobacterial secondary metabolites. Using a newly established electroporation procedure, the 56 kb epothilone biosynthetic gene cluster from the myxobacterium Sorangium cellulosum was introduced into the chromosome of strain DSM 7029 by transposition. Production of epothilones A, B, C, and D was detected despite their yields being low. Optimization of the medium, introduction of the exogenous methylmalonyl-CoA biosynthetic pathway, and overexpression of rare tRNA genes resulted in an approximately 75-fold increase in the total yields of epothilones to 307 μg L -1 . These results show that strain DSM 7029 has the potential to produce epothilones with reasonable titers and might be a broadly applicable host for the heterologous expression of other myxobacterial polyketide synthases and nonribosomal peptide synthetases, expediting the process of genome mining.

Evaluation of the Effect of Different Irrigation Levels of Drip Irrigation (Tape on Yield and Yield Components of Corn

Directory of Open Access Journals (Sweden)

mohammad karimi

2016-02-01

Full Text Available Introduction: One of the serious problems in the further development of maize cultivation is increasing irrigation efficiency. Using conventional irrigation causes a shortage of water resources to increase the acreage of the crop. With regard to the development of maize cultivation, agronomic and executable methods must be studied to reduce water consumption. Using drip irrigation system is most suitable for row crops. Hamedi et al. (2005 compared drip (tape and surface irrigation systems on yield of maize in different levels of water requirement and indicated that drip irrigation increases the amount of yield to 2015 kg/ha and water use efficiency to 3 time. Kohi et al. (2005 investigated the effects of deficit irrigation use of drip (tape irrigation on water use efficiency on maize in planting of one and two rows. The results showed that maximum water use efficiency related to crop density, water requirement and planting pattern 85000, 125% and two rows, respectively with 1.46 kg/m3. Jafari and Ashrafi (2011 studied the effects of irrigation levels, plant density and planting pattern in drip irrigation (tape on corn. The results showed that the amount of irrigation water and crop density on the level of 1% and their interactions and method of planting were significant at the 5 and 10% on water use efficiency, respectively. The yield was measured under different levels of irrigation, crop density and method of planting and the difference was significant on the level of 1%. Lamm et al. (1995 studied water requirement of maize in field with silt loam texture under sub drip irrigation and reported that water use reduced to 75%; but yield of maize remained at maximum amount of 12.5 t/ha. The objective of this study was to evaluate the drip (tape irrigation method for corn production practices in the Qazvin province in Iran. Materials and Methods: In this study, yield and yield components of corn (SC 704 were investigated under different levels of

Impacts of extreme heat and drought on crop yields in China: an assessment by using the DLEM-AG2 model

Science.gov (United States)

Zhang, J.; Yang, J.; Pan, S.; Tian, H.

2016-12-01

China is not only one of the major agricultural production countries with the largest population in the world, but it is also the most susceptible to climate change and extreme events. Much concern has been raised about how extreme climate has affected crop yield, which is crucial for China's food supply security. However, the quantitative assessment of extreme heat and drought impacts on crop yield in China has rarely been investigated. By using the Dynamic Land Ecosystem Model (DLEM-AG2), a highly integrated process-based ecosystem model with crop-specific simulation, here we quantified spatial and temporal patterns of extreme climatic heat and drought stress and their impacts on the yields of major food crops (rice, wheat, maize, and soybean) across China during 1981-2015, and further investigated the underlying mechanisms. Simulated results showed that extreme heat and drought stress significantly reduced national cereal production and increased the yield gaps between potential yield and rain-fed yield. The drought stress was the primary factor to reduce crop yields in the semi-arid and arid regions, and extreme heat stress slightly aggravated the yield loss. The yield gap between potential yield and rain-fed yield was larger at locations with lower precipitation. Our results suggest that a large exploitable yield gap in response to extreme climatic heat-drought stress offers an opportunity to increase productivity in China by optimizing agronomic practices, such as irrigation, fertilizer use, sowing density, and sowing date.

Development of high yielding mutants in lentil

International Nuclear Information System (INIS)

Rajput, M.A.; Sarwar, G.; Siddiqui, K.A.

2001-01-01

Full text: Lentil (Lens culinaris Medik.) locally known as Masoor, is the second most important rabi pulse crop, after chickpea, in Pakistan. It is cultivated on an area of over 63,400 ha, which constitutes about 4.83% of the total area under pulses. The annual production of the crop is 28,200 tones with an average yield of 445 kg/ha. Yield at the national level is very low, about one-half of the world's yield, which is mainly due to non-availability of high yield potential genotypes. Keeping in view the importance of mutants in developing a large number of new varieties, an induced mutations programme was initiated at AEARC, Tandojam during 1987-88, to develop high yielding varieties in lentil. For this, seeds of two lentil varieties, 'Masoor-85' and 'ICARDA-8' had been irradiated with gamma-rays ranging from 100-600 Gy in NIAB, Faisalabad during 1990. Selections were made in M2 on the basis of earliness, plant height, branches/plant and 100 grain weight. After confirming these mutants in M3 they were promoted in station yield trials and studied continuously for three consecutive years (1993- 1995). Overall results revealed that these mutants have consistent improvement of earliness in flowering and maturity. Plant height also increased in all mutant lines except AEL 23/40/91 where reduction in this attribute was observed as compared to parent variety. Mutant lines AEL 49/20/91 and AEL 13/30/91 showed improvement in 100 grain weight. The improvement of some agronomic characters enhanced the yield of mutant lines in comparison to parent varieties (Masoor-85 and ICARDA-8). The diversity in yield over the respective parents was computed from 6.94 to 60.12%. From these encouraging results it is hoped that mutant lines like AEL 12/30/91 and AEL 49/20/91 may serve as potential lentil genotypes in future. (author)

Improved ethanol yield and reduced Minimum Ethanol Selling Price (MESP by modifying low severity dilute acid pretreatment with deacetylation and mechanical refining: 1 Experimental

Directory of Open Access Journals (Sweden)

Chen Xiaowen

2012-08-01

Full Text Available Abstract Background Historically, acid pretreatment technology for the production of bio-ethanol from corn stover has required severe conditions to overcome biomass recalcitrance. However, the high usage of acid and steam at severe pretreatment conditions hinders the economic feasibility of the ethanol production from biomass. In addition, the amount of acetate and furfural produced during harsh pretreatment is in the range that strongly inhibits cell growth and impedes ethanol fermentation. The current work addresses these issues through pretreatment with lower acid concentrations and temperatures incorporated with deacetylation and mechanical refining. Results The results showed that deacetylation with 0.1 M NaOH before acid pretreatment improved the monomeric xylose yield in pretreatment by up to 20% while keeping the furfural yield under 2%. Deacetylation also improved the glucose yield by 10% and the xylose yield by 20% during low solids enzymatic hydrolysis. Mechanical refining using a PFI mill further improved sugar yields during both low- and high-solids enzymatic hydrolysis. Mechanical refining also allowed enzyme loadings to be reduced while maintaining high yields. Deacetylation and mechanical refining are shown to assist in achieving 90% cellulose yield in high-solids (20% enzymatic hydrolysis. When fermentations were performed under pH control to evaluate the effect of deacetylation and mechanical refining on the ethanol yields, glucose and xylose utilizations over 90% and ethanol yields over 90% were achieved. Overall ethanol yields were calculated based on experimental results for the base case and modified cases. One modified case that integrated deacetylation, mechanical refining, and washing was estimated to produce 88 gallons of ethanol per ton of biomass. Conclusion The current work developed a novel bio-ethanol process that features pretreatment with lower acid concentrations and temperatures incorporated with deacetylation

Effect of seed rate on growth, yield components and yield of mash bean grown under irrigated conditions of arid uplands of Balochistan, Pakistan

International Nuclear Information System (INIS)

Aachakzai, A.K.K.; Taran, S.A.

2011-01-01

A field experiment was carried out to investigate the effects of six different seed rates viz., 15, 17.5, 20, 22.5, 25 and 27.5 kg ha/sup -1/ on the growth, yield and yield attributes of mash bean Vigna mungo (L.) Hepper). This study was conducted for two consecutive years at the Agriculture Research Institute (ARI) under the existing semi-arid climatic, edaphic and water conditions of Quetta, Balochistan. Results revealed that plant population, pods plant/sup -1/, grain yield plant/sup -1/ and grain yield ha/sup -1/ were significantly (p<0.05 influenced by varying seed rates. However, other mentioned growth and yield attributes did not respond significantly. Statistically and numerically a maximum yield plant/sup -1/ (20.98 g) and yield ha/sup -1/ (3120 kg) were obtained in applied seed at the rate of 20 kg ha/sup -1/. Whereas, the same was obtained for plant population and plant height in applied seed rate of 25 kg ha/sup -1/. However, maximum number of branches plant/sup -1/ (4.22) was received for applied seeds at the rate of 15 kg ha/sup -1/. Therefore, seed at the rate of 20 kg ha/sup -1/ seems optimum which could be due to the most desirable population or planting density in the existing environmental conditions of Quetta. Results further revealed that only plant population plot/sup -1/ (r=0.481), and yield plant/sup -1/ (r=0.569) were significantly and positively correlated with grain yield ha/sup -1/, while all other remaining growth and yield attributes exhibited insignificant association with grain yield ha/sup -1/. Hence these two parameters i.e., planting density and grain yield plant/sup -1/ should be given more consideration while deciding about selection criteria for mash bean under irrigated conditions of arid uplands of Balochistan. (author)

Correlation and path-cofficient analysis of seed yield and yield ...

African Journals Online (AJOL)

This study was undertaken in order to determine the association among yield components and their direct and indirect effects on the seed yield of confectionery sunflower. 36 confectionery sunflower populations originated from different regions of Northwest Iran were characterized using 11 agromorphological traits ...

Integration process of fermentation and liquid biphasic flotation for lipase separation from Burkholderia cepacia.

Science.gov (United States)

Sankaran, Revathy; Show, Pau Loke; Lee, Sze Ying; Yap, Yee Jiun; Ling, Tau Chuan

2018-02-01

Liquid Biphasic Flotation (LBF) is an advanced recovery method that has been effectively applied for biomolecules extraction. The objective of this investigation is to incorporate the fermentation and extraction process of lipase from Burkholderia cepacia using flotation system. Initial study was conducted to compare the performance of bacteria growth and lipase production using flotation and shaker system. From the results obtained, bacteria shows quicker growth and high lipase yield via flotation system. Integration process for lipase separation was investigated and the result showed high efficiency reaching 92.29% and yield of 95.73%. Upscaling of the flotation system exhibited consistent result with the lab-scale which are 89.53% efficiency and 93.82% yield. The combination of upstream and downstream processes in a single system enables the acceleration of product formation, improves the product yield and facilitates downstream processing. This integration system demonstrated its potential for biomolecules fermentation and separation that possibly open new opportunities for industrial production. Copyright © 2017 Elsevier Ltd. All rights reserved.

Influence of wholesale lamb marketing options and merchandising styles on retail yield and fabrication time.

Science.gov (United States)

Lorenzen, C L; Martin, A M; Griffin, D B; Dockerty, T R; Walter, J P; Johnson, H K; Savell, J W

1997-01-01

Lamb carcasses (n = 94) from five packing plants, selected to vary in weight class and fat thickness, were used to determine retail yield and labor requirements of wholesale lamb fabrication. Carcasses were allotted randomly according to weight class to be fabricated as whole carcasses (n = 20), three-piece boxes (n = 22), or subprimals (n = 52). Processing times (seconds) were recorded and wholesale and retail weights (kilograms) were obtained to calculate retail yield. Subprimals were fabricated into bone-in retail cuts or boneless or semi-boneless retail cuts. Retail yield for subprimal lamb legs decreased from 85.3 +/- .6% for bone-in to 68.0 +/- .7% for a completely boneless retail product. Correspondingly, processing times increased from 126.1 +/- 5.4 s to 542.0 +/- 19.2 s for bone-in and boneless legs, respectively. For all subprimals, retail yield percentage tended to decrease and total processing time increase as cuts were fabricated to boneless or semi-boneless end points compared with a bone-in end point. Percentage retail yield did not differ (P > .05) among whole carcass, three-piece box, and subprimal marketing methods. Total processing time was shorter for subprimals (P < .05) than for the other two marketing methods.

The Effect of Foliar Application of Humic Acid and Nano Fertilizer (Pharmks® on Morphological Traits, Yield, Essential Oil Content and Yield of Black Cumin (Nigella sativa L.

Directory of Open Access Journals (Sweden)

majid azizi

2017-08-01

Full Text Available Introduction: The ever-increasing tendency to the use of medicinal plants in the world has grown concerns about their cultivation and production processes. As medicinal plants are more compatible with the nature, special interest and attention have recently been given to herb therapy, and use of medicinal plants, being limited by the rise of pharmaceutical drugs, has become again common and widespread due to a number of reasons. In a sustainable agriculture system, application of the fertilizers which are nature friendly and suitable for plants is essential. This becomes more important when dealing with medicinal plants. Doing studies over the effect of nano¬pharmax and humic acid fertilizer on the plant, no research findings were obtained. So, in order to use less chemical fertilizers to prevent environmental pollution and encourage farmers to use more organic fertilizer, the present study was carried out to evaluate the effect of foliar application of humic acid and nano-pharmax fertilizer on the growth index, yield, yield components, essential oil content of N. sativa. Materials and Methods: The experiment was conducted at Research Station, Faculty of Agriculture, Ferdowsi University of Mashhad, Iran, in 2012-2013. Land preparation was done in October. The land area was 80 square meters in which three blocks were designed. Eight plots were prepared within each block and each plot was planted with 4 lines. Furrow sowing operations were carried out on October 29. The plants were thinned in 4-6 leaf stage. First irrigation after planting, and subsequent ones were done every 7 days until the end of the growing season. No herbicides were applied in this plan and weeding was done by hand. The test treatments included humic acid and nano¬pharmax fertilizer with the levels of 0, 1, 3 and 6 mg per liter and 0 and 1 ml per liter, respectively. Fertilizer treatments was applied at the 8-10 leaf stage and continued once every two weeks, three times

significance of rice sheath photosynthesis: yield determination by c ...

African Journals Online (AJOL)

ACSS

1State Key Laboratory of Hybrid Rice, Hunan Hybrid Rice Research Center, Changsha 410125, P.R. China. 2School of ... for contribution rates of sheath photosynthesis to economical yield. ..... related processes during ripening in rice plants.

Evaluation of Yield, Yield Components and Essential Oil Content of Marigold (Calendula officinalis L. with the Use of Nitrogen and Vermicompost

Directory of Open Access Journals (Sweden)

Alireza Pazoki

2016-10-01

Full Text Available Environmenal problems resulting from application of nitrogen fertilizers in the production plant materials led agricultural specialists to use clean and alternative methods to towards the organic farming and use of organic fertilizers. In this study, thus, the effect of nitrogen and vermicompost fertilizer rates on yield, yield components, essential oil content and some morphological traits of marigold was studied in a split plot experiment based on completely randomized blocks design with 3 replications in Shahr-e-Rey region during 2013 growing season. Nitrogen rates with 3 levels (0, 60, 120 and 180 kg.ha-1 were assigned to main plots and vermicompost with 3 levels (0, 10, and 20 t.ha-1 to the sub plots. Mean comparison of simple effects indicated that the plants treated with 120 kg.ha-1 nitrogen fertilizer and 20 t.ha-1 organic fertilizer vermicompost produced higher trait values under study than control (non application of vermincompost. Interaction effect of experimented factors was significant on all traits under evaluation. Thus, highest seed yield (1567 kg.ha-1, biological yield (6664 kg.ha-1 and essential oil yield (8.85 kg.ha-1 obtained by the application of 120 kg.ha-1 nitrogen fertilizer and 20 t.ha-1 varmicompost. Based on the results obtained it could be said that nitrogen and vermicompost may improve seed and biological yield and yield components of marigold.

Biometric Secured Result Processing Software For Nigerian Tertiary Institutions

Directory of Open Access Journals (Sweden)

Oladipo Oluwasegun

2015-08-01

Full Text Available Abstract One of the challenges facing result processing in Nigerian tertiary institutions is the problem of insecurity. Untraceable changes are made to students result and this result to various disasters such as innocent people losing their jobs since their innocence cannot be proven. Biometric based systems operate on behavioral and physiological biometric data to identify a person and grant required access to a user. Physiological characteristics such as fingerprint remains unchanged throughout an individuals life time and thus it can serve as a viable means of identifying and authenticating users who are to access a system. In this study fingerprint biometric based result processing software is developed to ensure that users are well authenticated and are made to see only what they are pre-configured to see and work with. The fingerprint authentication system was developed using visual basic.net. Staff fingerprints were enrolled into the system to form a biometric template which the system validates against at every login attempt on the result processing software. The digital personal one touch ID sdk and other libraries were used in developing the authentication system. The result processing software also ensures that all write transactions to the database are confirmed and identified by forcing another biometric authentication at the point of making a write request to the web server and associated database. This ensures that the exact person initiating the transaction was the same user who logged in to the application. The users identified at login and various confirmation milestones set for write transactions are logged into a table for future reference and audit trail. Conclusively the developed system has helped to eradicate the problem of user impersonation by ensuring only authorized users are made to access the software and in-turn participate in result processing activities.

Soviet test yields

Science.gov (United States)

Vergino, Eileen S.

Soviet seismologists have published descriptions of 96 nuclear explosions conducted from 1961 through 1972 at the Semipalatinsk test site, in Kazakhstan, central Asia [Bocharov et al., 1989]. With the exception of releasing news about some of their peaceful nuclear explosions (PNEs) the Soviets have never before published such a body of information.To estimate the seismic yield of a nuclear explosion it is necessary to obtain a calibrated magnitude-yield relationship based on events with known yields and with a consistent set of seismic magnitudes. U.S. estimation of Soviet test yields has been done through application of relationships to the Soviet sites based on the U.S. experience at the Nevada Test Site (NTS), making some correction for differences due to attenuation and near-source coupling of seismic waves.

Optimizing the space-time-yield and the specific energy consumption of molten salt electrolysis processes for the electrowinning of metals in subgroups 4 and 5 of the periodic table of elements

International Nuclear Information System (INIS)

Koeck, W.

1988-04-01

Disadvantages of molten salt electrolysis are its low space-time-yield (kg/m 3 h) combined with its high specific energy consumption (kWh/kg). These factors essentially determine how electrolysis is applied on an industrial scale. The electrolysis of tantalum was selected as an example representative for other electrolytic processes; this series of tests allow statements also on the winning of the other elements from subgroups 4 and 5 of the periodic table, and on electrolytic aluminium extraction. Optimal operating conditions for direct current electrolysis were determined in the laboratory by varying the current density and the electrolysis temperature. In order to improve the space-time-yield from an existing electrolytic cell with a given electrolyte composition beyond the optimal range of direct current electrolysis, the process of periodic current reversal is applied. In this process, the polarity is reversed for a short time at constant periodic intervals. If the forward time period and the backward time period are chosen in a suitable way, both the current efficiency and the space-time-yield can be improved without increasing the energy consumption. 59 refs., 48 figs., 8 tabs. (Author)

The influence of climatic conditions changes on grain yield in Winter Triticale (X Triticosecale Wittm.

Directory of Open Access Journals (Sweden)

Ionuț RACZ

2017-05-01

Full Text Available The aim of this paper is making out the influence of climatic changes on grain yield of winter triticale in relation with applied fertilizer. The influence of environmental conditions on growing and development of triticale plants depends of grow stages and their duration. During five experimental years (2010-2015 the climatic conditions were different year to year, with an accentuated heating trend, influencing plant phenology, accelerating or slowing down some important processes disturbing grain yield formation. The influence of drought is more accentuated by heating stress and prolonging of these conditions during the main phenological processes have a negative influence on plant growth or development with effect on the grain yield formation process.

Interrelationships between morphometric variables and rounded fish body yields evaluated by path analysis

Directory of Open Access Journals (Sweden)

Rafael Vilhena Reis Neto

2012-07-01

Full Text Available The objective of this study was to verify which morphometric measures and ratios are more directly associated with the weight and body yields of rounded fish. A total of 225 specimens of rounded fish (59 pacus, 61 tambaquis, 52 tambacus and 53 paquis with average weight of 972.43 g (±115.52 g were sampled, stunned, slaughtered, weighed, measured, and processed for morphometric and processing yield analysis. The morphometric measures taken were: standard length (CP; head length (CC; head height (AC; body height (A1; and body width (L1. For completeness, the following morphometric ratios were calculated: CC/CP, AC/CP, A1/CP, L1/CP, CC/A1, AC/A1, L1/A1, CC/AC and L1/CC. The yields of carcass, filet, rib and filet with rib were estimated after processing. Initially, a "stepwise" procedure was performed in order to eliminate multicollinearity problems among the morphometric variables, and the phenotypic correlations were then calculated for the dependent variables (weight and body yields and independent variables (morphometric measurements and ratios. These correlations were later deployed in direct and indirect effects through path analysis, and the direct and indirect contributions of each variable were measured in percentage terms. The CC and A1 measures were important for determining the weight of rounded fish. The CC/A1 ratio was the variable most directly associated with carcass yield. For filet, filet with rib and rib yields, the L1/CC ratio was found to be more appropriate and can be used directly.

Increase in the yield of mung bean (Vigna radiata [L.] R. Wilczek) with storage of radiation-modified kappa-carrageenan

International Nuclear Information System (INIS)

Aurigue, F.B.; Montefalcon, D.R.V.; Dela Cruz, R.M.M.; Abad, L.V.

2015-01-01

Kappa-carrageenan is a sulphated polysaccharide naturally present in seaweeds. Upon gamma radiation, radiolysis produces low molecular weight κ-carrageenan with the cleavage of some of its sulphate groups. Consequently, the acidic solution may further hydrolyze κ-carrageenan. The study aims to determine the effects of application by foliar spraying of freshly prepared irradiated κ-carrageenan solution and those which has been stored for 3 months on the yield of potted mungbean (Vigna radiata) plants. Foliar application of radiation-modified κ-carrageenan solution on the Kulabo variety two weeks after sowing, at flower initiation, and at fruit formation stage resulted in 30.8% increase in pod yield and 50.2% increase in seed yield compared to plants similarly treated with NitroPlus inoculants only. Pod yield and seed yield advantage over the control plants (no inoculants and no fertilizer) were 57.2% and 83% respectively no fertilizer was used in all treatments. These result confirm the previous finding that irradiated κ-carrageenan solution sprayed every two weeks inoculants only. There was 200% yield advantage over the negative control. The increase in yield is attributed to the longer length of pod, higher number of seed per pod, heavier 100-seed weight. Interestingly, the 3 months-old solution gave better result compared to a freshly irradiated one. There was 26.5% and 26.8% difference in pod yield and seed yield, respectively. Compared with the Control plants of the Kulabo variety, those sprayed with stored κ-carrageenan solution had 105% advantage in seed yield. It was proposed that the degradation process of the oligo-κ-carrageenan continue during storage because of the acidic nature of the solution. Undoubtedly, irradiated κ-carrageenan solution has plant growth promoting activity that increase yield mung bean by spraying on the leaves at least three times before fruit development.(author)

Predicting Great Lakes fish yields: tools and constraints

Science.gov (United States)

Lewis, C.A.; Schupp, D.H.; Taylor, W.W.; Collins, J.J.; Hatch, Richard W.

1987-01-01

Prediction of yield is a critical component of fisheries management. The development of sound yield prediction methodology and the application of the results of yield prediction are central to the evolution of strategies to achieve stated goals for Great Lakes fisheries and to the measurement of progress toward those goals. Despite general availability of species yield models, yield prediction for many Great Lakes fisheries has been poor due to the instability of the fish communities and the inadequacy of available data. A host of biological, institutional, and societal factors constrain both the development of sound predictions and their application to management. Improved predictive capability requires increased stability of Great Lakes fisheries through rehabilitation of well-integrated communities, improvement of data collection, data standardization and information-sharing mechanisms, and further development of the methodology for yield prediction. Most important is the creation of a better-informed public that will in turn establish the political will to do what is required.

Extended incident-angle dependence formula of sputter yield

International Nuclear Information System (INIS)

Ono, T.; Shibata, K.; Muramoto, T.; Kenmotsu, T.; Li Z.; Kawamura, T.

2006-06-01

We extend a new semi-empirical formula for incident-angle dependence of normalized sputter yield that includes the contribution to sputter yield from the direct knock-out process that was not considered in the previously proposed one. Three parameters included in the new one are estimated for data calculated with ACAT code for D + ions incident obliquely on C, Fe and W materials in incident-energy regions from several tens of eV to 10 keV. Then, the parameters are expressed with functions of incident energy. The formula with the functions derived well reproduces that using the ACAT data in the whole energy range. (author)

Effects of phosphorus and zinc applications on the yields and yields ...

African Journals Online (AJOL)

Effects of phosphorus and zinc applications on the yields and yields components of sole early maturing maize ( Zea mays ) and bambaranut ( Vigna subterranean Thour. ) and in intercrop under southern guinea savannah ecology zone.

Statistical modelling and deconvolution of yield meter data

DEFF Research Database (Denmark)

Tøgersen, Frede Aakmann; Waagepetersen, Rasmus Plenge

2004-01-01

and an impulse response function. This results in an unusual spatial covariance structure (depending on the driving pattern of the combine harverster) for the yield monitoring system data. Parameters of the impulse response function and the spatial covariance function of the yield are estimated using maximum...

INFLUENCE OF BIOLOGICALLY ACTIVE SUBSTANCES ON TOMATO YIELD AND QUALITY

OpenAIRE

G. I. Yarovoy; V. I. Kuzmenko

2017-01-01

The study of influence of growth regulators and biopreparations affecting on decrease of disease development, increase of yield capacity and final product quality was carried out in tomato. It was shown that all preparations were effective in decreasing the process of diseases development and increasing the yield capacity and product quality. The studies were carried out in the experimental fields at the Institute of Vegetables and Melons NAAS, in Ukraine in 2011-2012. The field studies were ...

6 Grain Yield

African Journals Online (AJOL)

create a favourable environment for rice ... developing lines adaptable to many ... have stable, not too short crop duration with ..... Analysis of variance of the effect of site and season on maturity, grain yield and plant ..... and yield components.

Partial ion yield and NEXAFS of 2-(perfluorooctyl)ethanethiol self-assembled monolayer: Comparison with PTFE results

CERN Document Server

Setoyama, H; Murase, T; Imamura, M; Mase, K; Okudaira, K K; Hara, M; Ueno, N

2003-01-01

Partial-ion-yield (PIY) spectra using ion time-of-flight (TOF) method and near-edge absorption fine structure (NEXAFS) spectra were measured for 2-(perfluorooctyl)ethanethiol [CF sub 3 (CF sub 2) sub 7 (CH sub 2) sub 2 SH] self-assembled monolayer (F8-SAM) on Au(1 1 1) near carbon K-edge. The PIY spectra of the F8-SAM at the magic angle, where -CF sub 3 groups exist at the surface were compared with those of the rubbed polytetrafluoroethylene (PTFE) thin film. The F sup + intensity from the F8-SAM at the photon energy of the sharp peak of the NEXAFS, which originates from the excitation of C1s electron to sigma sup * (C-F) states at -CF sub 2 - chain, was extremely smaller than that from the rubbed PTFE film. This result clearly indicates that the ions observed by PIY do not originate from the film inside but from the surface. This was confirmed by changes in ion-TOF mass spectra during soft X-ray induced etching of the F8-SAM. The NEXAFS peaks of the F8-SAM were also assigned by considering PIY results.

Evaluation of Yield, Yield Components and Growth Indices of Safflower (Carthamus tinctorius L. in Conventional and Organic Farming Systems

Directory of Open Access Journals (Sweden)

Mahdieh Hajghani

2017-09-01

with conventional farming, inorganic fertilization was considered as a conventional agriculture (CA for each replication. Growth indices were assessed based on the growing degree days (GDD. After harvested, the head number per plant, seed number per head, 1000 seed weight and seed yield were evaluated. Also, two separate statistical analyses were used for comparison organic treatments with each other and conventional agriculture with organic treatments. Results and discussion The results showed that the maximum LAI, TDW and CGR have been determined at 9 t ha-1 vermicompost and 3000 ppm humic acid in CA. Likewise, the results indicated that vermicompost leads to a significant increase in seed yield, flower yield and yield components except 1000 seed weight. Head number per plant, seed number per head and seed yield were affected by humic acid treatments and increased significantly from 1000 to 3000 ppm. However, 1000 seed weight decreased with the increasing concentration of humic acid. It should be mentioned that, 9 t ha-1 vermicompost and 3000 ppm humic acid produced the highest head number per plant (24.75, seed number per head (56.71 and seed yield (4268.17 kg ha-1 in two years that in comparison with CA were increased 79.22%, 30.37% and 89.49%, respectively. Conclusion The results of this study indicated that acceptable yield was obtained with increasing HA concentration at lower levels of vermicompost compared to the higher amount of vermicompost without HA that is economically beneficial. For example, application of 6 t ha-1 vermicompost + 3000 ppm HA had higher seed yield (3027.08 kg ha-1 than 9 t ha-1 vermicompost without foliar application of HA (2722.5 kg ha-1, although there was no significant difference between them.

Effect of planting date on yield of wheat genotypes in Sindh

International Nuclear Information System (INIS)

Khokhar, Z.; Hussain, I.

2010-01-01

Due to reduction in tillering period and increased risk of hot weather during grain filling, late planting results in linear reduction in wheat grain yield. A study was undertaken to determine the effects of planting dates on growth and yield of different wheat genotypes in Sindh. The trial was laid out in RCBD with split plot arrangement having four replications during 2000-01 and 2001-02 at Sakrand, Sindh. Four sowing dates i.e. November 1 and 15, December 1 and 15 were in main plots, whereas six wheat genotypes (V-7001, V-7002, V-7004, MPT-6, Abadgar-93, and Anmol-91) were in sub plots. Because of better tillering, plant growth, growth period, number of grain per unit area and grain weight, November 15 planted wheat had maximum grain yield of 5904 kg ha/sup -1/, followed by November 1 and December 1 which gave 5302 and 4948 kg ha/sup -1 /respectively. Wheat planted on December 15 resulted in minimum grain yield of 4756 kg ha/sup -1/. Wheat genotype, V-7002 had significantly (P<0.05) higher grain yield of 5578 kg ha/sup -1/ in comparison with other genotypes. Whereas genotype MPT-6 had grain yield of 5366 kg ha-1 that was also significantly higher than other genotypes. However, V-7004 had minimum grain yield of 4716 kg ha/sup -1/ in comparison with other genotypes. While evaluating performance of different genotypes on different sowing dates, V-7002 resulted in maximum yield on November 15 and late planting. On the other hand, V-7004 had lower yield on all planting dates. Results from the study revealed that maximum grain yield could be achieved with wheat planted in first fortnight of November and any delay in wheat planting might reduce wheat yield. (author)

A software application for the processing of students results | Ukem ...

African Journals Online (AJOL)

A software application for the processing of students results. ... In this work, a computer software application was developed to facilitate the automated processing of the results. ... Full Text: EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT

The Effect of Rate and Application Method of Potassium on Yield and Yield Components of Cotton in Saline Condition

Directory of Open Access Journals (Sweden)

A Ardakani

2016-12-01

Full Text Available Introduction Salinity is a major abiotic stress that affects approximately 7% of the world’s total land area. Cotton (Gossypium barbadense L. is considered as one of the most important cash crops which is widely used for agricultural and industrial purposes. Although, cotton is classified as one of the most salt-tolerant major crops but its growth and development are adversely affected by soil or water salinity. Understanding salinity and fertilizer interaction can mitigate salinity stress and improving crop yield. Potassium (K is an essential nutrient that affects most of the biochemical and physiological processes that are involved in plant resistance to biotic and abiotic stresses. Proper management of K fertilizer is especially important in saline soils where K application might reduce the adverse effects of salinity on plant growth and yield. There is a little information about rate and application method of K on yield and yield component of cotton in saline condition. The objective of this study was to determine the effects of rate and application method of K on yield and yield component of cotton in soil and water saline condition. Materials and Methods The experiment was carried out at Sabzevar Agriculture and Natural Resources Research center (Haresabad, 30km southwest of Sabzevar (32◦32N, 51◦23E and 1630 above mean sea level,in 2014.This experiment was conducted as split plot design based on randomized complete block design with three replications. Factors were: K rate (75 and 150kg ha-1 Solopotash (containing 50% K2O and 18% S comprising the main plot and application method (25%at planting+25% at first flowering and 50%at early boll development (25P+25F+50B, 25%at planting+50% at first flowering and 25%at early boll development (25P+50F+25B, 25%at planting+25% at vegetative stage (5-8 leaves stage, 25% at first flowering and 25% at early boll development (25P+25V+25F+50B, 25% at planting+25% at vegetative stage and 50% at first

Effects of Drought Stress on Canola (Brassica napus L. Genotypes Yield and Yield Components

Directory of Open Access Journals (Sweden)

R Khani

2018-02-01

in SAS ver. 9.2 and Minitab ver. 17 to test for normality. Means were separated using Fishers Least Significant Difference (LSD set at a 0.05 significance level. Results and Discussion As expected, canola genotypes showed different responses to availability of water at flowering and pod setting growth stages. Results indicated that drought stress at flowering and pod setting growth stages had severe influence on canola genotypes yield and its components. L72, L146, L183, L210 and Karaj 2 genotypes tend to produce higher yields compared to other genotypes in no-stress conditions. Hence, these genotypes are suitable for planting in irrigated lands or place that enough precipitation downfall especially in their phenological growth stages. In contrast, these genotypes are not suitable for planting in arid or semi-arid regions like Iran, because the yields reduced severely in drought stress conditions. However, KR18, HW101, SW101 and Karaj3 genotypes could not produce as same yield as L72, L146, L183, L210 and Karaj2 genotypes in no-stress condition, they had minimum yield loss in susceptible phenological growth stages especially flowering growth stage compared to other genotypes. L183 genotype could produce yield similar to tolerant genotypes, but its yield loss was high in comparison with no stress condition. Conclusions Based on our findings in this study, KR18, HW101, SW101 and Karaj3 can be considered the best among other 18 genotypes in the selection of genotypes tolerant to drought stress occurring in flowering and pod setting stages. However, this study must be repeated in other climates and different drought stress conditions to acknowledge what we achieved in this research. After that, decision can be made about planting these genotypes tolerant in arid and semi-arid regions. In this regard, we can also do more comprehensive works can be done on breeding of these genotypes, because water crisis will be the future challenge in Iran.

High-yield production of mannitol by Leuconostoc pseudomesenteroides CTCC G123 from chicory-derived inulin hydrolysate.

Science.gov (United States)

Zhang, Min; Gu, Lei; Cheng, Chao; Zhu, Junru; Wu, Hao; Ma, Jiangfeng; Dong, Weiliang; Kong, Xiangping; Jiang, Min; Ouyang, Pingkai

2017-08-01

Chicory is an agricultural plant with considerable potential as a carbohydrate substrate for low-cost production of biochemicals. In this work, the production of mannitol by Leuconostoc pseudomesenteroides CTCC G123 from chicory-derived inulin hydrolysate was investigated. The bioconversion process initially suffered from the leakage of fructose to the phosphoketolase pathway, resulting in a low mannitol yield. When inulin hydrolysate was supplemented with glucose as a substrate for mannitol production in combination with aeration induction and nicotinic acid induced redox modulation strategies, the mannitol yield greatly improved. Under these conditions, significant improvement in the glucose consumption rate, intracellular NADH levels and mannitol dehydrogenase specific activity were observed, with mannitol production increasing from 64.6 to 88.1 g/L and overall yield increase from 0.69 to 0.94 g/g. This work demonstrated an efficient method for the production of mannitol from inulin hydrolysate with a high overall yield.

Computer processing of the Δlambda/lambda measured results

International Nuclear Information System (INIS)

Draguniene, V.J.; Makariuniene, E.K.

1979-01-01

For the processing of the experimental data on the influence of the chemical environment on the radioactive decay constants, five programs have been written in the Fortran language in the version for the monitoring system DUBNA on the BESM-6 computer. Each program corresponds to a definite stage of data processing and acquirement of the definite answer. The first and second programs are calculation of the ratio of the pulse numbers measured with different sources and calculation of the mean value of dispersions. The third program is the averaging of the ratios of the pulse numbers. The fourth and the fifth are determination of the change of the radioactive decay constant. The created programs for the processing of the measurement results permit the processing of the experimental data beginning from the values of pulse numbers obtained directly in the experiments. The programs allow to treat a file of the experimental results, to calculated various errors in all the stages of the calculations. Printing of the obtained results is convenient for usage

Automatic yield-line analysis of slabs using discontinuity layout optimization.

Science.gov (United States)

Gilbert, Matthew; He, Linwei; Smith, Colin C; Le, Canh V

2014-08-08

The yield-line method of analysis is a long established and extremely effective means of estimating the maximum load sustainable by a slab or plate. However, although numerous attempts to automate the process of directly identifying the critical pattern of yield-lines have been made over the past few decades, to date none has proved capable of reliably analysing slabs of arbitrary geometry. Here, it is demonstrated that the discontinuity layout optimization (DLO) procedure can successfully be applied to such problems. The procedure involves discretization of the problem using nodes inter-connected by potential yield-line discontinuities, with the critical layout of these then identified using linear programming. The procedure is applied to various benchmark problems, demonstrating that highly accurate solutions can be obtained, and showing that DLO provides a truly systematic means of directly and reliably automatically identifying yield-line patterns. Finally, since the critical yield-line patterns for many problems are found to be quite complex in form, a means of automatically simplifying these is presented.

THE IMPACT OF EXTRUSION ON THE BIOGAS AND BIOMETHANE YIELD OF PLANT SUBSTRATES

Directory of Open Access Journals (Sweden)

Krzysztof Pilarski

2016-09-01

Full Text Available The objective of the present work was to determine the effect of pretreatment by extrusion on the biogas and biomethane yield of lignocellulosic substrates such as maize silage and maize straw silage. The biogas yields of the substrates before and after treatment were compared. Moreover, energy efficiency of pretreatment by extrusion was analyzed in order to assess the applicability of the process in an agricultural biogas plant. Extrusion tests were carried out in a short single-screw extruder KZM-2 in which the length-to-diameter ratio of the screw was 6:1 and rotational speed was 200 rpm. The biogas yield tests of the plant substrates after extrusion were carried out in a laboratory scale, using 15 biofermenters operated in a periodic manner, at a constant temperature of 39°C (mesophilic digestion and controlled pH conditions. The gas-emission analysis was performed using a certified gas analyzer from Geotech GA5000. Pretreatment by extrusion was observed to improve the quantity of methane generated: in terms of fresh matter for maize silage subjected to extrusion, the methane yield was 16.48% higher than that of the non-extruded silage. On the other hand, maize straw silage after extrusion gave 35.30% more methane than did the same, non-extruded, material. Differences in yields relative to dry organic matter are also described in this paper. Taking into account the amount of energy that is spent on pretreatment and the generated amount of methane, the energy balance for the process gives an idea of the economics of the operation. For maize silage, energy efficiency was lower by 13.21% (-553.2 kWh/Mg, in contrast to maize straw silage, where the increase in energy was 33.49% (678.4 kWh/Mg. The obtained results indicate that more studies on the pretreatment and digestion of maize silage are required in order to improve the efficiency of its use for making biogas. To fully utilize its potential, it is necessary to know thoroughly the effect of

High Photoluminescence Quantum Yield in Band Gap Tunable Bromide Containing Mixed Halide Perovskites.

Science.gov (United States)

Sutter-Fella, Carolin M; Li, Yanbo; Amani, Matin; Ager, Joel W; Toma, Francesca M; Yablonovitch, Eli; Sharp, Ian D; Javey, Ali

2016-01-13

Hybrid organic-inorganic halide perovskite based semiconductor materials are attractive for use in a wide range of optoelectronic devices because they combine the advantages of suitable optoelectronic attributes and simultaneously low-cost solution processability. Here, we present a two-step low-pressure vapor-assisted solution process to grow high quality homogeneous CH3NH3PbI3-xBrx perovskite films over the full band gap range of 1.6-2.3 eV. Photoluminescence light-in versus light-out characterization techniques are used to provide new insights into the optoelectronic properties of Br-containing hybrid organic-inorganic perovskites as a function of optical carrier injection by employing pump-powers over a 6 orders of magnitude dynamic range. The internal luminescence quantum yield of wide band gap perovskites reaches impressive values up to 30%. This high quantum yield translates into substantial quasi-Fermi level splitting and high "luminescence or optically implied" open-circuit voltage. Most importantly, both attributes, high internal quantum yield and high optically implied open-circuit voltage, are demonstrated over the entire band gap range (1.6 eV ≤ Eg ≤ 2.3 eV). These results establish the versatility of Br-containing perovskite semiconductors for a variety of applications and especially for the use as high-quality top cell in tandem photovoltaic devices in combination with industry dominant Si bottom cells.

Application of Adaptive Noise Cancellation for Anti-Vibration in Yield Monitor

Directory of Open Access Journals (Sweden)

Yan LI

2014-04-01

Full Text Available In the process of grain harvest, yield monitor system acquires real-time spatial distribution information of crop yield to provide important basis of decision-making for subsequent assignments of precision agriculture. The measurement accuracy has been seriously affected by Combine working vibration. Based on an innovative test platform of wheat combine harvester for yield monitor, well simulate the working vibration at the field situation; impact-based grain flow sensor with the structure of dual-parallel-beams as test terminals and using the NI (National Instrument data acquisition card to acquire signals; grain impacted frequency as fundamental frequency to process harmonic extraction, and for extracted signals, applied the improved LMS adaptive algorithm to interference cancellation, aim to eliminate interference cased by working vibration. The comparative experiment show that the maximum relative error less than 2 % under the proposed method and proved that the proposed algorithm in this paper is effective.

Yield and drougth tolerance of six varieties of common bean (Phaseolus vulgaris L. under field condition

Directory of Open Access Journals (Sweden)

Yanitza Meriño Hernandez

2015-01-01

Full Text Available In two moisture conditions (drought and irrigation were evaluated six varieties of common bean (Phaseolus vulgaris L., with a factorial randomized complete blocks. The objectives of the study was to evaluate the effect caused by drought conditions crop varieties, identify high performance and features that enable them to adapt to varying conditions of soil moisture. With the data in yields between the two humidity conditions intensity indices of drought (IIS, susceptibility to drought (ISS, relative efficiency (IER, geometric mean (GM and percent yield losses were calculated . The results were statistically processed using the Statistica software version 8.0 for Windows, if significant differences Tukey test was applied to p<0.05. The selection based on levels ISS, MG, IER and PPR identified high yielding varieties adapted to drought and favorable moisture conditions.

Using normalized difference vegetation index (NDVI) to estimate sugarcane yield and yield components

Science.gov (United States)

Sugarcane (Saccharum spp.) yield and yield components are important traits for growers and scientists to evaluate and select cultivars. Collection of these yield data would be labor intensive and time consuming in the early selection stages of sugarcane breeding cultivar development programs with a ...

Potato yield and yield structure depending on irrigation

Directory of Open Access Journals (Sweden)

Milić Stanko

2010-01-01

Full Text Available In the agroclimatic conditions of the Vojvodina Province, the application of an economic water regime and modern technology is necessary for stable and intensive potato production. A two-year experiment on calcareous chernozem was carried out to determine how irrigation and different pre-irrigation soil moisture affect potato yield and distribution of tuber fraction in the potato yield. The block-design trial had four replicates and was adapted for sprinkler irrigation conditions. It included four treatments: irrigation with pre-irrigation moisture levels of 60 % of field water capacity (FC, irrigation with pre-irrigation moisture levels of 70 % (FC, irrigation with pre-irrigation moisture levels of 80% (FC, and a non-irrigated control treatment. Irrigation significantly increased the yield of potato, which increased from 37.27 % to 75.86 %. Under irrigation, the percentage of small fractions decreased in favour of the 55 mm one, or fractions above the 45-55 mm range. On average, irrigated treatments produced significantly more tubers than the conditions of natural water supply. .

Allelopathic Effect of Wheat and Barley Residues on Yield and Yield Components of Cowpea (Vigna sinensis L. and Weeds Control

Directory of Open Access Journals (Sweden)

M Shahbyki

2018-02-01

residue at a rate of 4 and 8 ton ha-1 significantly decreased weed density than non-weeding treatment. Seed number per pod, biological and grain yield of cowpea significantly increased in the soil incorporation with wheat residue at a rate of 8 ton ha-1 compared to control. Our results showed that weeding and soil incorporation with wheat residue at a rate of 8 ton ha-1 increased cowpea yield by 78.23 and 80.79% compared to no weeding treatment, respectively. Wheat is a potent source of bioactive phytotoxic compounds representing three main classes as phenolic (hydroxybenzoic, vanillic, pcoumaric, syringic and ferulic acids being most frequently reported and transferulic and trans-pcoumaric acids being the dominant acids, cyclic hydroxamic acids (a class of alkaloids and short chain fatty acids. It is reported that wheat extract compounds can interfere with basic processes of receiver plants as photosynthesis, cell division, respiration and protein synthesis and indirectly provoke other forms of stresses. Thus, these compounds can reduce weed germination and growth. Another important effect of these allelochemicals is the activation of cellular antioxidant system in response to uncontrolled production and accumulation of reactive oxygen species. The reason for increase in grain yield was the control of weeds and probably the allelopathic effects of crop water extracts promoted the wheat growth which ultimately increases grain yield. Conclusions The present study concluded that wheat phytotoxins in straw inhibited germination and seedling growth of weeds, and the inhibition was concentration-dependent. Also wheat straw added to soil increased yield and some traits of cowpea. In general, the results showed that wheat straw can reduce weed suppression and can improve characteristics of plant, moreover, decreased environment risks of chemical inputs and ensure sustainability of production in long time.

Long Term Evaluation of Yield Stability Trend for Cereal Crops in Iran

Directory of Open Access Journals (Sweden)

mehdi nassiri mahalati

2016-05-01

Full Text Available During the last few decades cereals yield have increased drastically at the national level however, information about yield stability and its resistance to annual environmental variability are scare. In this study long term stability of grin yield of wheat, barley, rice, corn and overall cereals in Iran were evaluated during a 40-year period (1971-2011. Stability analysis was conducted using two different methods. In the first method the residuals of regression between crop yield and time (years were calculated as stability index. For this different segmented regression models including linear, bi-linear and tri-linear were fitted to yield trend data and the best model for each crop was selected based on statistical measures. Absolute residuals (the difference between actual and predicted yields for each year as well as relative residuals (absolute residuals as percent of predicted yield were estimated. In the second method yield stability was estimated from the slope of the regression line between average annual yield of all cereals (environmental index and the yield of each crop in the same year. Results indicted that in wheat and barley absolute and relative residuals were increased during the study period leading to reduction of stability despite considerable yield increment. However, for rice and corn residuals followed a decreasing trend and therefore yield stability of these crops was increased during the last 40 years. The same result was obtained with the environmental index but in this method reduction of yield stability in barley was lower than wheat. Based on the results, yield and yield stability of cereals crops in Iran increased during the last 40 years. However, the percentage increase in stability is lower than that of yield. Application of nitrogen fertilizers was led to reduction in stability. Yield stability of wheat, barley, rice, corn and overall cereals was improved with increasing their cultivated area.

impacts of climate and farming management on maize yield

African Journals Online (AJOL)

ACSS

2015-11-24

Nov 24, 2015 ... Dry spells may affect crop growth and final yields, even .... Supplemental soil information, up to the depth of. 93 cm was .... be slightly cooler (Tmax) due to its higher attitude. (1807 m ... All climate data processing and plotting.

Аbоut a theoretical yield of glucose from starch

Directory of Open Access Journals (Sweden)

V. V. Ananskikh

2016-01-01

Full Text Available Starch is the raw materials for production of crystal food glucose. With at enzyme conversion of the high purity starch, it is possible to receive glucosic syrups of a glucose equivalent (GE 98%, where there is about 95% glucose and maltose and maltotriose – of about 5%. Starch hydrolysis is carried out with a gain of solids. Thus, 100 kg of amylum is possible to give up to 109.81 kg of glucose syrup on dry basis. Taking in account the losses at manufacture steps a yield can decrease to 105.61 kg. The purified glucose syrup is concentrated up to 73–75% of dry matters and goes to a crystallization step. Crystallization of glucose is carried out in a supersaturated solution within 56–70 hours at reduced temperature from 46–48 °C to 24–26 °C, resulting a mixture of glucose crystals and an intercrystal run-off syrup called a massecuite. The crystallization process is stopped when a 50% of crystals content in massecuite is reached. At the same time glucose yield will be 105.61/2 = 52.8%. Crystallization is carried out according to the single-stage scheme, with partial return of the end product – hydrol into the hydrolised syrup. Then the massecuite is sent to a centrifugation step for dividing glucose crystals and a run-off syrup, which is partially returned to the initial syrup to reduce in GE. The second part of the run-off syrup goes to realization. It must be kept in mind: the higher GE of the glucose syrup sent to a crystallization step, the more quantity of a hydrol is possible to be returned to hydrolysed syrup. Therefore, it is in a resulted a higher yield of glucose crystals. On the basis of the carried-out calculations the computer program was made with which it is possible to define a theoretical glucose and a hydrol yield, while changing values of a hydrolysed syrup. The higher GE values of a hydrolysed syrup are the higher yield of crystal glucose and the lower one of hydrol are. So, at 98% GE of a hydrolysed syrup it is

Genetic analysis of yield in peanut ( Arachis hypogaea L.) using ...

African Journals Online (AJOL)

The yield had significant major gene effect and the results implied that not only should the two major genes' effects be considered but also the polygene's effect should be considered in breeding to increase peanut yield. Key words: Peanut, yield, major gene plus polygene inheritance model, genetic analysis.

Investigation of transient dynamics of capillary assisted particle assembly yield

Energy Technology Data Exchange (ETDEWEB)

Virganavičius, D. [Institute of Materials Science, Kaunas University of Technology, K. Baršausko St. 59, Kaunas LT-51423 (Lithuania); Laboratory of Micro- and Nanotechnology, Paul Scherrer Institut, 5232 Villigen PSI (Switzerland); Juodėnas, M. [Institute of Materials Science, Kaunas University of Technology, K. Baršausko St. 59, Kaunas LT-51423 (Lithuania); Tamulevičius, T., E-mail: tomas.tamulevicius@ktu.lt [Institute of Materials Science, Kaunas University of Technology, K. Baršausko St. 59, Kaunas LT-51423 (Lithuania); Department of Physics, Kaunas University of Technology, Studentų St. 50, Kaunas LT-51368 (Lithuania); Schift, H. [Laboratory of Micro- and Nanotechnology, Paul Scherrer Institut, 5232 Villigen PSI (Switzerland); Tamulevičius, S. [Institute of Materials Science, Kaunas University of Technology, K. Baršausko St. 59, Kaunas LT-51423 (Lithuania); Department of Physics, Kaunas University of Technology, Studentų St. 50, Kaunas LT-51368 (Lithuania)

2017-06-01

Highlights: • Regular particles arrays were assembled by capillary force assisted deposition. • Deposition yield dynamics was investigated at different thermal velocity regimes. • Yield transient behavior was approximated with logistic function. • Pattern density influence for switching behavior was assessed. - Abstract: In this paper, the transient behavior of the particle assembly yield dynamics when switching from low yield to high yield deposition at different velocity and thermal regimes is investigated. Capillary force assisted particle assembly (CAPA) using colloidal suspension of green fluorescent 270 nm diameter polystyrene beads was performed on patterned poly (dimethyl siloxane) substrates using a custom-built deposition setup. Two types of patterns with different trapping site densities were used to assess CAPA process dynamics and the influence of pattern density and geometry on the deposition yield transitions. Closely packed 300 nm diameter circular pits ordered in hexagonal arrangement with 300 nm pitch, and 2 × 2 mm{sup 2} square pits with 2 μm spacing were used. 2-D regular structures of the deposited particles were investigated by means of optical fluorescence and scanning electron microscopy. The fluorescence micrographs were analyzed using a custom algorithm enabling to identify particles and calculate efficiency of the deposition performed at different regimes. Relationship between the spatial distribution of particles in transition zone and ambient conditions was evaluated and quantified by approximation of the yield profile with a logistic function.

Assessment of genotype x environment interaction on yield and ...

African Journals Online (AJOL)

user

2011-04-11

Apr 11, 2011 ... yield and yield components of durum wheat genotypes ... The results of combined analysis of variance showed a strong influence of the ... Stability is defined as the early prediction of environmental im- ... Many resear-.

X-ray yields by low energy heavy ion excitation in alkali halide solid targets

International Nuclear Information System (INIS)

Kurup, M.B.; Prasad, K.G.; Sharma, R.P.

1981-01-01

Solid targets of the alkali halides KCl, NaCl and KBr are bombarded with ion beams of 35 Cl + , 40 Ar + and 63 Cu + in the energy range 165 keV to 320 keV. The MO and characteristic K X-ray yields resulting from the ion-atom collision have been systematically studied. Both MO and Cl K X-ray yields are enhanced by factors 3.5 and 2 respectively in KCl targets as compared to that in NaCl when bombarded with either Cl + or Ar + projectiles. An intercomparison of MO and K X-ray yields for a given projectile-target combination has shown that the latter increases ten times faster than the former as the energy of the projectile is increased from 165 to 320 keV indicating a correspondingly stronger velocity dependence of the K X-ray production process. The X-ray yields observed in the symmetric Cl-Cl collision are identical to those observed in the asymmetric Ar-Cl collision for the same projectile velocities in both KCl and NaCl targets. It is inferred that the multiple ionization of the projectile resulting in an increase in the binding energy of its inner shells offsets the expected enhancement in the X-ray yields in a symmetric collision. The same projectiles, Ar or Cl, incident on KBr targets have produced only Br L X-rays. Using substantially heavier projectiles than the target atoms (Na, K and Cl), like 63 Cu + ions, the inner shell excitation by recoiling atoms is shown. (orig.)

Researches on Determination Yield and Yield Components of Some Common Vetch (Vicia sativa L. Genotypes in Ecological Conditions of Diyarbakır

Directory of Open Access Journals (Sweden)

Seyithan SEYDOŞOĞLU

2014-09-01

Full Text Available The research was conducted to determine yield and yield components of some common vetch genotypes in order to examine some of the traits, during 2011-2013 seasons in GAP International Agricultural Research and Training Center was carried out on the experimental field. In the study, a total of 20 different genotypes were used common vetch, field trials randomized block design with 3 replications was established. In the study, herbage yield, hay yield and seed yield in addition to days to %50 flowering duration, plant height, main stem length, main stem number, pod number per plant, grain number per pod as affecting yield some properties were also investigated. In both years of the study, days to %50 flowering duration and grain number per pod characteristics examined, except among genotypes for all other parameters are determined significant differences in statistical terms. According to the average of two years result; days to %50 flowering duration, plant height, main stem length, main stem number, pod number per plant, grain number per pod, herbage yield, hay yield, seed yield, 1000 seed weight were changed between 157.8-174.0 days, 33.9-62.6 cm, 52.0-83.3 cm, 1.6-2.6 number, 13.5-21.2 number, 4.7-5.6 number, 1522.0-3232.3 kg da-1, 308.0-919.5 kg da-1, 92.2-293.7 kg da-1, 46.5-84.5 g, respectively. According to these results, under the climate and soil conditions of Diyarbakır; for the grass production common vetch genotypes "D-135" was suggested and for the seed production common vetch genotypes "IFVS-715" and "GAP-59998" were suggested.

Effects of sowing dates and different fertilizers on yield, yield components, and oil percentage of castor bean (Ricinus communis L.

Directory of Open Access Journals (Sweden)

parviz rezvani moghadam

2009-06-01

Full Text Available In order to study the effects of sowing dates and different fertilizers on yield, yield components, and oil percentage of castor bean, an experiment was conducted at Experimental station, College of Agriculture, Ferdowsi University of Mashhad, Iran in years 2004-2005. The experimental treatments comprised all combinations of four sowing dates (11 April, 25 April, 8 May and 22 May and three different fertilizers (cow manure (30 tons/ha, compost (30 tons/ha, chemical fertilizers (100 kg/ha N and 250 kg/ha of super phosphate and no fertilizer as control. Different characteristics such as plant height, main inflorescence height, number of inflorescence per plant, number of secondary stems per plant, number of capsules per plant, number of grain per plant, grain weight per plant, 100 seed weight, grain yield, oil percentage and oil yield were recorded. A factorial arrangement based on a randomized complete block design with three replications was used. The results showed by delaying sowing date grain yield, seed oil percentage and oil yield were decreased, but there was no significant differences between 25 April, 8 May and 22 May sowing dates. Harvest index and 100 seed weight did not affect by neither sowing dates nor fertilizer treatments. The highest number of branches per plant, number of fertile inflorescences per plant, number of fertile capsules per plant, number of grain per plant, grain weight per plant and biological yield were obtained at 8 May sowing date on chemical fertilizer. Percentage of seed oil, grain yield and oil yield was higher at the first sowing date (11 April in compost and chemical fertilizer treatments. Keywords: Castor bean, sowing date, fertilizer, grain yield, oil percentage.

Anoxic and aerobic values for the yield coefficient of the ...

African Journals Online (AJOL)

2008-04-15

Apr 15, 2008 ... Simulations with dual values (aerobic and anoxic conditions) for heterotrophic yield (modified ... mittently aerated processes can achieve a significant nitrate ...... dynamic calibration and long-term validation for an intermittently.

Comparing predicted yield and yield stability of willow and Miscanthus across Denmark

DEFF Research Database (Denmark)

Larsen, Søren; Jaiswal, Deepak; Bentsen, Niclas Scott

2016-01-01

was 12.1 Mg DM ha−1 yr−1 for willow and 10.2 Mg DM ha−1 yr−1 for Miscanthus. Coefficent of variation as a measure for yield stability was poorest on the sandy soils of northern and western Jutland and the year-to-year variation in yield was greatest on these soils. Willow was predicted to outyield...... Miscanthus on poor, sandy soils whereas Miscanthus was higher yielding on clay-rich soils. The major driver of yield in both crops was variation in soil moisture, with radiation and precipitation exerting less influence. This is the first time these two major feedstocks for northern Europe have been compared....... The semi-mechanistic crop model BioCro was used to simulate the production of both short rotation coppice (SRC) willow and Miscanthus across Denmark. Predictions were made from high spatial resolution soil data and weather records across this area for 1990-2010. The potential average, rain-fed mean yield...

Effect of Limited Drip Irrigation Regime on Yield and Yield Components of Sesame under Mediterranean Conditions

Directory of Open Access Journals (Sweden)

Panayiota PAPASTYLIANOU

2017-05-01

Full Text Available Sesame is one of the most important oilseed crops in the world. Irrigation is of great importance to sesame production due to its positive effect on growth parameters. Although sesame has good drought tolerance compared with many other crops, it is particularly susceptible to drought damage during the seedling, flowering and seed filling stages and this can lead to yield loss. The aim of this study was to determine the response of sesame landraces to different irrigation applications during the 2015 growing season. The experiment was set up as a split plot design with three replicates, four main plots (irrigation treatments, designated as 100%, 75% 50% and 0 of the daily crop evapotranspiration and two sub-plots (sesame landraces, Limnos and Evros. Different characteristics such as plant height, number of seeds per capsule, and number of capsules per plant, seed yield, 1000-seed weight and % capsules without seeds, were recorded. The results indicated that all traits except 1000-seed weight were significantly affected by irrigation regimes. Plant height, shattering losses and number of capsules per plant decreased with increasing water shortage. Seed yield and number of seeds per capsule were less affected by irrigation level and showed higher values in the 50% of the daily crop evapotranspiration treatment. Limnos produced higher seed yield and number of seeds per capsule under all irrigation regimes. Evros showed higher plant height and shattering losses than Limnos. The results of this study suggest that sesame landraces can use water efficiently, are locally adapted and associated with traditional farming systems.

Foodservice yield and fabrication times for beef as influenced by purchasing options and merchandising styles.

Science.gov (United States)

Weatherly, B H; Griffin, D B; Johnson, H K; Walter, J P; De La Zerda, M J; Tipton, N C; Savell, J W

2001-12-01

Selected beef subprimals were obtained from fabrication lines of three foodservice purveyors to assist in the development of a software support program for the beef foodservice industry. Subprimals were fabricated into bone-in or boneless foodservice ready-to-cook portion-sized cuts and associated components by professional meat cutters. Each subprimal was cut to generate mean foodservice cutting yields and labor requirements, which were calculated from observed weights (kilograms) and processing times (seconds). Once fabrication was completed, data were analyzed to determine means and standard errors of percentage yields and processing times for each subprimal. Subprimals cut to only one end point were evaluated for mean foodservice yields and processing times, but no comparisons were made within subprimal. However, those traditionally cut into various end points were additionally compared by cutting style. Subprimals cut by a single cutting style included rib, roast-ready; ribeye roll, lip-on, bone-in; brisket, deckle-off, boneless; top (inside) round; and bottom sirloin butt, flap, boneless. Subprimals cut into multiple end points or styles included ribeye, lip-on; top sirloin, cap; tenderloin butt, defatted; shortloin, short-cut; strip loin, boneless; top sirloin butt, boneless; and tenderloin, full, side muscle on, defatted. Mean yields of portion cuts, and mean fabrication times required to manufacture these cuts differed (P < 0.05) by cutting specification of the final product. In general, as the target portion size of fabricated steaks decreased, the mean number of steaks derived from any given subprimal cut increased, causing total foodservice yield to decrease and total processing time to increase. Therefore, an inverse relationship tended to exist between processing times and foodservice yields. With a method of accurately evaluating various beef purchase options, such as traditional commodity subprimals, closely trimmed subprimals, and pre-cut portion

Measurement of the Exclusive Branching Fractions B{sup 0} {yields} {eta}K*{sup 0} and B{sup +} {yields} {eta}K*{sup +}

Energy Technology Data Exchange (ETDEWEB)

Aubert, B.

2004-02-12

The authors present the results of searches for B decays to the two charmless two-body final states B{sup 0} {yields} {eta}K*{sup 0} and B{sup +} {yields} {eta}K*{sup +}, based on 20.7 fb{sup -1} of data collected in 1999 and 2000 with the BABAR detector at PEP-II. They find the branching fractions {Beta}(B{sup 0} {yields} {eta}K*{sup 0}) = (19.8 {sub -5.6}{sup +6.5} {+-} 1.7) x 10{sup -6} and {Beta}(B{sup +} {yields} {eta}K*{sup +}) = (22.1 {sub -9.2}{sup +11.1} {+-} 3.3) x 10{sup -6}, where the first error quoted is the statistical and the second systematic.

Changes in diurnal temperature range and national cereal yields

Energy Technology Data Exchange (ETDEWEB)

Lobell, D

2007-04-26

Models of yield responses to temperature change have often considered only changes in average temperature (Tavg), with the implicit assumption that changes in the diurnal temperature range (DTR) can safely be ignored. The goal of this study was to evaluate this assumption using a combination of historical datasets and climate model projections. Data on national crop yields for 1961-2002 in the 10 leading producers of wheat, rice, and maize were combined with datasets on climate and crop locations to evaluate the empirical relationships between Tavg, DTR, and crop yields. In several rice and maize growing regions, including the two major nations for each crop, there was a clear negative response of yields to increased DTR. This finding reflects a nonlinear response of yields to temperature, which likely results from greater water and heat stress during hot days. In many other cases, the effects of DTR were not statistically significant, in part because correlations of DTR with other climate variables and the relatively short length of the time series resulted in wide confidence intervals for the estimates. To evaluate whether future changes in DTR are relevant to crop impact assessments, yield responses to projected changes in Tavg and DTR by 2046-2065 from 11 climate models were estimated. The mean climate model projections indicated an increase in DTR in most seasons and locations where wheat is grown, mixed projections for maize, and a general decrease in DTR for rice. These mean projections were associated with wide ranges that included zero in nearly all cases. The estimated impacts of DTR changes on yields were generally small (<5% change in yields) relative to the consistently negative impact of projected warming of Tavg. However, DTR changes did significantly affect yield responses in several cases, such as in reducing US maize yields and increasing India rice yields. Because DTR projections tend to be positively correlated with Tavg, estimates of yields

Central Bank Communication and the Yield Curve

DEFF Research Database (Denmark)

Leombroni, Matteo; Vedolin, Andrea; Venter, Gyuri

countries. We study two explanations for this finding, revelation of the ECB’s private information and credit risk, and argue that neither channel can explain the effect on yield spreads. Motivated by this, we consider an alternative explanation in which central bank communication affects the aggregate...... demand due to the presence of reaching-for-yield investors. We show that a resulting risk premium channel helps to rationalize our findings....

Study on the desorption yield for natural botanic sample induced by energetic heavy ions

International Nuclear Information System (INIS)

Xue, J.M.; Wang, Y.G.; Du, G.H.; Yan, S.; Zhao, W.J.

2002-01-01

The dependence of desorption yield for the natural botanic sample bombarded with heavy ion on the electronic stopping power (S e ) and dose has been measured by weighing sample mass before and after irradiation. Primary ions including 50 keV N + , 1.5 MeV F + , 3.0 MeV F 2+ , 4.0 MeV F 2+ and 3.0 MeV Si 2+ were used in the experiment. Three megaelectron volts of F 2+ with doses ranging from 4x10 15 to 4x10 16 ions/cm 2 were used in order to investigate the influence of ion dose. A mass spectrum from the sample bombarded with 3 MeV Si 2+ was also taken for a better understanding of the desorption process. Results show that the natural botanic sample is very easily to be desorpted. The yield of MeV heavy ions can be as high as thousands CH 2 O/ion, and significantly depends on both the S e and dose. The measured yields increase quickly with S e , but drop down with increasing ion dose. These results fit roughly with the prediction of the pressure pulse model

Has the use of talc an effect on yield and extra virgin olive oil quality?

Science.gov (United States)

Caponio, Francesco; Squeo, Giacomo; Difonzo, Graziana; Pasqualone, Antonella; Summo, Carmine; Paradiso, Vito Michele

2016-08-01

The maximization of both extraction yield and extra virgin olive oil quality during olive processing are the main objectives of the olive oil industry. As regards extraction yield, it can be improved by both acting on time/temperature of malaxation and using physical coadjuvants. It is well known that, generally, increasing temperature of malaxation gives an increase in oil extraction yield due to a reduction in oily phase viscosity; however, high malaxation temperature can compromise the nutritional and health values of extra virgin olive oil, leading to undesirable effects such as accelerated oxidative process and loss of volatile compounds responsible for oil flavor and fragrance. The addition of physical coadjuvants in olive oil processing during the malaxation phase, not excluded by EC regulations owing to its exclusively physical action, is well known to promote the breakdown of oil/water emulsions and consequently make oil extraction easier, thus increasing the yield. Among physical coadjuvants, micronized natural talc is used for olive oil processing above all for Spanish and Italian olive cultivars. The quality of extra virgin olive oil depends on numerous variables such as olive cultivar, ripeness degree and quality, machines utilized for processing, oil storage conditions, etc. However, the coadjuvants utilized in olive processing can also influence virgin olive oil characteristics. The literature highlights an increase in oil yield by micronized natural talc addition during olive processing, whereas no clear trend was observed as regards the chemical, nutritional and sensory characteristics of extra virgin olive oil. Although an increase in oil stability was reported, no effect of talc was found on the evolution of virgin olive oil quality indices during storage. © 2016 Society of Chemical Industry. © 2016 Society of Chemical Industry.

Global evaluation of a semiempirical model for yield anomalies and application to within-season yield forecasting.

Science.gov (United States)

Schauberger, Bernhard; Gornott, Christoph; Wechsung, Frank

2017-11-01

Quantifying the influence of weather on yield variability is decisive for agricultural management under current and future climate anomalies. We extended an existing semiempirical modeling scheme that allows for such quantification. Yield anomalies, measured as interannual differences, were modeled for maize, soybeans, and wheat in the United States and 32 other main producer countries. We used two yield data sets, one derived from reported yields and the other from a global yield data set deduced from remote sensing. We assessed the capacity of the model to forecast yields within the growing season. In the United States, our model can explain at least two-thirds (63%-81%) of observed yield anomalies. Its out-of-sample performance (34%-55%) suggests a robust yield projection capacity when applied to unknown weather. Out-of-sample performance is lower when using remote sensing-derived yield data. The share of weather-driven yield fluctuation varies spatially, and estimated coefficients agree with expectations. Globally, the explained variance in yield anomalies based on the remote sensing data set is similar to the United States (71%-84%). But the out-of-sample performance is lower (15%-42%). The performance discrepancy is likely due to shortcomings of the remote sensing yield data as it diminishes when using reported yield anomalies instead. Our model allows for robust forecasting of yields up to 2 months before harvest for several main producer countries. An additional experiment suggests moderate yield losses under mean warming, assuming no major changes in temperature extremes. We conclude that our model can detect weather influences on yield anomalies and project yields with unknown weather. It requires only monthly input data and has a low computational demand. Its within-season yield forecasting capacity provides a basis for practical applications like local adaptation planning. Our study underlines high-quality yield monitoring and statistics as critical

THE INFLUENCE OF FERTILIZATION ON YIELD AND YIELD COMPONENT FORMATION OF SOYBEAN VARIETIES

Directory of Open Access Journals (Sweden)

Eva CANDRÁKOVÁ

2009-03-01

Full Text Available In 2005 and 2006, the influence of fertilization was investigated on forming of yield components and yield of three soybean varieties in sugar beet growing area. Varieties Korada, Supra and OAC Vision were grown. Number of plants per m2, number of pods per plant, number of seeds in pod, thousand seeds weight, yield of seeds, yield of stems and harvest index were examined. Variants of fertilization: I. non-fertilized control, II. LAV 27 % (40 kg ha-1 net nutrient of N in growing stage of first pair of true leaves unfolded, III. Humix komplet (rate 8 l.ha-1 applied in growing stage of first pair of true leaves unfolded (4 l.ha-1 and in growing stage of first flower buds visible (4 l.ha-1, IV. Humix komplet in rate 8 l.ha-1 applied in growing stage of first pair of true leaves unfolded. The yields of seeds and stems were high significantly influenced by variety, fertilization and year. The significantly highest yield of seeds was achieved by Korada variety (4,04 t.ha-1. Varieties OAC Vision and Supra reached yields in interval 3,74-3,84 t.ha-1. Split rate of Humix komplet (III var significantly influenced yield of seeds and stems. The fertilization have increased weight of seeds in proportion to aboveground phyto-mass weight, what was expressed by harvest index.

Effect of Coated Urea Fertilizer on Yield and Yield Components of Sweet Corn (KSC 403 under Deficit Irrigation

Directory of Open Access Journals (Sweden)

N Farid

2017-11-01

Full Text Available This study was carried out to assess the effect of coated urea fertilizer on yield and yield components of sweet corn (KSC 403 under different irrigation regimes, in Ramin Agriculture and Natural Sciences University, Iran by using strip split plot in a randomized complete block design with four replications. Three levels of deficit irrigation (100%, 80 and 60% of calculated water requirement of sweet corn were assigned as vertical factor and six sources of urea fertilizer (without urea, un-coated urea, sulfur-coated urea fertilizer, starch-coated urea, agar-coated urea and chitin-coated urea were assigned to horizontal factor. Effects of deficit water and source of fertilizer were statistically significant on plant height, 1000 kernel weight, ear diameter, and number of rows per ear, ear yield, biological yield and harvest index. Maximum of plant height (153.23 cm, 1000 kernel weight (104.51 g, grain yield (9853.3 kg/ha and biological yield (12471.6 kg/ha were obtained in chitin coated urea fertilizer. Maximum of ear diameter (4.67 cm and number of row per ear (13.22 were achieved in agar coated urea fertilizer and that of harvest index (45.79% was indicated by starch-coated urea. Maximum of length of ear, number of kernels per row and grain yield were 23.65cm, 25.83 and 7142 kg/ha, respectively, and were obtained with the using of chitin-coated urea fertilizer and 100% water requirement. Minimum values of these traits were 13.54 cm, 5.56 and 871 kg/ha, respectively, and were obtained by using of control (no urea application and 60% water requirement. Results showed that biopolymer coated urea is potent to improve some morphological characteristics and increase grain yield of sweet corn.

Sample preservation, transport and processing strategies for honeybee RNA extraction: Influence on RNA yield, quality, target quantification and data normalization.

Science.gov (United States)

Forsgren, Eva; Locke, Barbara; Semberg, Emilia; Laugen, Ane T; Miranda, Joachim R de

2017-08-01

Viral infections in managed honey bees are numerous, and most of them are caused by viruses with an RNA genome. Since RNA degrades rapidly, appropriate sample management and RNA extraction methods are imperative to get high quality RNA for downstream assays. This study evaluated the effect of various sampling-transport scenarios (combinations of temperature, RNA stabilizers, and duration) of transport on six RNA quality parameters; yield, purity, integrity, cDNA synthesis efficiency, target detection and quantification. The use of water and extraction buffer were also compared for a primary bee tissue homogenate prior to RNA extraction. The strategy least affected by time was preservation of samples at -80°C. All other regimens turned out to be poor alternatives unless the samples were frozen or processed within 24h. Chemical stabilizers have the greatest impact on RNA quality and adding an extra homogenization step (a QIAshredder™ homogenizer) to the extraction protocol significantly improves the RNA yield and chemical purity. This study confirms that RIN values (RNA Integrity Number), should be used cautiously with bee RNA. Using water for the primary homogenate has no negative effect on RNA quality as long as this step is no longer than 15min. Copyright © 2017 Elsevier B.V. All rights reserved.

Optimization of the Enzymatic Saccharification Process of Milled Orange Wastes

Directory of Open Access Journals (Sweden)

Daniel Velasco

2017-08-01

Full Text Available Orange juice production generates a very high quantity of residues (Orange Peel Waste or OPW-50–60% of total weight that can be used for cattle feed as well as feedstock for the extraction or production of essential oils, pectin and nutraceutics and several monosaccharides by saccharification, inversion and enzyme-aided extraction. As in all solid wastes, simple pretreatments can enhance these processes. In this study, hydrothermal pretreatments and knife milling have been analyzed with enzyme saccharification at different dry solid contents as the selection test: simple knife milling seemed more appropriate, as no added pretreatment resulted in better final glucose yields. A Taguchi optimization study on dry solid to liquid content and the composition of the enzymatic cocktail was undertaken. The amounts of enzymatic preparations were set to reduce their impact on the economy of the process; however, as expected, the highest amounts resulted in the best yields to glucose and other monomers. Interestingly, the highest content in solid to liquid (11.5% on dry basis rendered the best yields. Additionally, in search for process economy with high yields, operational conditions were set: medium amounts of hemicellulases, polygalacturonases and β-glucosidases. Finally, a fractal kinetic modelling of results for all products from the saccharification process indicated very high activities resulting in the liberation of glucose, fructose and xylose, and very low activities to arabinose and galactose. High activity on pectin was also observed, but, for all monomers liberated initially at a fast rate, high hindrances appeared during the saccharification process.

High yield fabrication of fluorescent nanodiamonds

International Nuclear Information System (INIS)

Boudou, Jean-Paul; Curmi, Patrick A; Jelezko, Fedor; Wrachtrup, Joerg; Balasubramanian, Gopalakrischnan; Reuter, Rolf; Aubert, Pascal; Sennour, Mohamed; Thorel, Alain; Gaffet, Eric

2009-01-01

A new fabrication method to produce homogeneously fluorescent nanodiamonds with high yields is described. The powder obtained by high energy ball milling of fluorescent high pressure, high temperature diamond microcrystals was converted in a pure concentrated aqueous colloidal dispersion of highly crystalline ultrasmall nanoparticles with a mean size less than or equal to 10 nm. The whole fabrication yield of colloidal quasi-spherical nanodiamonds was several orders of magnitude higher than those previously reported starting from microdiamonds. The results open up avenues for the industrial cost-effective production of fluorescent nanodiamonds with well-controlled properties.

High yield fabrication of fluorescent nanodiamonds

Energy Technology Data Exchange (ETDEWEB)

Boudou, Jean-Paul; Curmi, Patrick A [Structure and Activity of Normal and Pathological Biomolecules-INSERM/UEVE U829, Universite d' Evry-Val d' Essonne, Batiment Maupertuis, Rue du pere Andre Jarlan, F-91025 Evry (France); Jelezko, Fedor; Wrachtrup, Joerg; Balasubramanian, Gopalakrischnan; Reuter, Rolf [3.Physikalisches Institut, University of Stuttgart, Pfaffenwaldring 57, D-70550 Stuttgart (Germany); Aubert, Pascal [Nanometric Media Laboratory, Universite d' Evry-Val d' Essonne, Batiment Maupertuis, Rue du pere Andre Jarlan, F-91025 Evry (France); Sennour, Mohamed; Thorel, Alain [Centre des Materiaux, Mines Paris, ParisTech, BP 87, F-91000 Evry (France); Gaffet, Eric [Nanomaterials Research Group-UMR 5060, CNRS, UTBM, Site de Sevenans, F-90010 Belfort (France)], E-mail: jpb.cnrs@free.fr, E-mail: pcurmi@univ-evry.fr, E-mail: f.jelezko@physik.uni-stuttgart.de

2009-06-10

A new fabrication method to produce homogeneously fluorescent nanodiamonds with high yields is described. The powder obtained by high energy ball milling of fluorescent high pressure, high temperature diamond microcrystals was converted in a pure concentrated aqueous colloidal dispersion of highly crystalline ultrasmall nanoparticles with a mean size less than or equal to 10 nm. The whole fabrication yield of colloidal quasi-spherical nanodiamonds was several orders of magnitude higher than those previously reported starting from microdiamonds. The results open up avenues for the industrial cost-effective production of fluorescent nanodiamonds with well-controlled properties.

INFLUENCE OF WEATHER CONDITIONS ON GRAIN YIELD, OIL CONTENT AND OIL YIELD OF NEW OS SUNFLOWER HYBRIDS

Directory of Open Access Journals (Sweden)

Anto Mijić

2017-01-01

Full Text Available With the purpose of determining the influence of weather conditions on the yield components of sunflower, the results of three-year field trials are analysed in the paper. In the trials sown in Osijek in 2013, 2014 and 2015, there were 15 sunflower hybrids: two foreign hybrids and 13 hybrid combinations of the Agricultural Institute Osijek. In the period before sowing (January – March, the highest amount of precipitation was in 2013 (213.1 mm, then in 2015 (167.9 mm, and the lowest in 2014 (109.5 mm. In the growing period (April – September, the highest amount of precipitation (487.3 mm was in 2014, 475.7 mm in 2013, and in 2015 it was the lowest (251.6 mm. In 2013, during the growing period, the mean monthly air temperature was 19.1°C, in 2015 19.9°C, and in 2014 18.6°C. Of these years, statistically significant at the P=0.05, the highest value of the analysed traits was recorded in 2013: grain yield of 6.47 t ha-1, oil content 51.69% and oil yield 3.05 t ha-1. Grain yield, oil content and oil yield were lower in 2015, and the lowest in 2014. Matej, a newly recognized sunflower hybrid of the Agricultural Institute Osijek had the highest values of grain and oil yield (6.95 and 3.39 t ha-1, and by its oil content of 53.44%, it was in the third place. For high grain and oil yields of sunflower, in addition to the optimal air temperature, the amount and distribution of precipitation before and also during the growing season are very important.

Local yield stress statistics in model amorphous solids

Science.gov (United States)

Barbot, Armand; Lerbinger, Matthias; Hernandez-Garcia, Anier; García-García, Reinaldo; Falk, Michael L.; Vandembroucq, Damien; Patinet, Sylvain

2018-03-01

We develop and extend a method presented by Patinet, Vandembroucq, and Falk [Phys. Rev. Lett. 117, 045501 (2016), 10.1103/PhysRevLett.117.045501] to compute the local yield stresses at the atomic scale in model two-dimensional Lennard-Jones glasses produced via differing quench protocols. This technique allows us to sample the plastic rearrangements in a nonperturbative manner for different loading directions on a well-controlled length scale. Plastic activity upon shearing correlates strongly with the locations of low yield stresses in the quenched states. This correlation is higher in more structurally relaxed systems. The distribution of local yield stresses is also shown to strongly depend on the quench protocol: the more relaxed the glass, the higher the local plastic thresholds. Analysis of the magnitude of local plastic relaxations reveals that stress drops follow exponential distributions, justifying the hypothesis of an average characteristic amplitude often conjectured in mesoscopic or continuum models. The amplitude of the local plastic rearrangements increases on average with the yield stress, regardless of the system preparation. The local yield stress varies with the shear orientation tested and strongly correlates with the plastic rearrangement locations when the system is sheared correspondingly. It is thus argued that plastic rearrangements are the consequence of shear transformation zones encoded in the glass structure that possess weak slip planes along different orientations. Finally, we justify the length scale employed in this work and extract the yield threshold statistics as a function of the size of the probing zones. This method makes it possible to derive physically grounded models of plasticity for amorphous materials by directly revealing the relevant details of the shear transformation zones that mediate this process.

Effects of Chemical and Organic Fertilizers on Growth, Yield and Yield Component of Tomato (Lycopersicon sculentum L.

Directory of Open Access Journals (Sweden)

R Mirzaei Talarposhti

2017-03-01

Full Text Available Introduction Although using animal manures and crop residues as a traditional method for increasing soil fertility and crop yield has a long history but Conventional agricultural systems rely on the use of chemical fertilizer due to its immediate availability of nutrients. In many of modern agricultural systems using chemical fertilizers as a fast and easiest way to reduce nutrient deficiency and increasing soil fertility is considered. Intensive and continuous use of chemical fertilizers leads to decreasing the stability and sustainability of agricultural systems and also poses major threat to environment and human health. Organic fertilizers have positive effects on physiochemical and biological attributes of soil and could be classified in three different groups (i.e. Animal manures, green manure and composts.Using animal manure not only increase soil fertility but also could result in increasing infiltration, aeration and water holding capacity of soil. The main role of these fertilizers is related to physical change in soil. Different types of composts such as municipal waste compost and vermicompost also have similar positive effects, but usually the farmers observe the main effect of these organic fertilizers in long term. In order to investigate the effects of different types of organic fertilizers on growth indexes, yield and yield component of tomato (Lycopersicon sculentum L. current experiment was conducted. Materials and Methods The experiment was conducted based on randomized complete block design (RCBD with three replications and six treatments in the research station of Shahid Beheshti University. The experimental treatments were: Control or no fertilizer (NF, chemical fertilizer (CF, cow manure (CM, poultry manure (PM, vermicompost (VC and municipal waste compost (MC. Considering nitrogen concentration in all of the treatments different amounts of these fertilizers were used based on nitrogen recommendation for the field, so in