WorldWideScience

Sample records for process research unit

  1. Product- and Process Units in the CRITT Translation Process Research Database

    DEFF Research Database (Denmark)

    Carl, Michael

    than 300 hours of text production. The database provides the raw logging data, as well as Tables of pre-processed product- and processing units. The TPR-DB includes various types of simple and composed product and process units that are intended to support the analysis and modelling of human text......The first version of the "Translation Process Research Database" (TPR DB v1.0) was released In August 2012, containing logging data of more than 400 translation and text production sessions. The current version of the TPR DB, (v1.4), contains data from more than 940 sessions, which represents more...

  2. FINAL INTERIM REPORT VERIFICATION SURVEY ACTIVITIES IN FINAL STATUS SURVEY UNITS 7, 8, 9, 10, 11, 13 and 14 AT THE SEPARATIONS PROCESS RESEARCH UNIT, NISKAYUNA, NEW YORK

    International Nuclear Information System (INIS)

    Jadick, M.G.

    2010-01-01

    The Separations Process Research Unit (SPRU) facilities were constructed in the late 1940s to research the chemical separation of plutonium and uranium. SPRU operated between February 1950 and October 1953. The research activities ceased following the successful development of the reduction/oxidation and plutonium/uranium extraction processes that were subsequently used by the Hanford and the Savannah River sites.

  3. Research on the pyrolysis of hardwood in an entrained bed process development unit

    Energy Technology Data Exchange (ETDEWEB)

    Kovac, R.J.; Gorton, C.W.; Knight, J.A.; Newman, C.J.; O' Neil, D.J. (Georgia Inst. of Tech., Atlanta, GA (United States). Research Inst.)

    1991-08-01

    An atmospheric flash pyrolysis process, the Georgia Tech Entrained Flow Pyrolysis Process, for the production of liquid biofuels from oak hardwood is described. The development of the process began with bench-scale studies and a conceptual design in the 1978--1981 timeframe. Its development and successful demonstration through research on the pyrolysis of hardwood in an entrained bed process development unit (PDU), in the period of 1982--1989, is presented. Oil yields (dry basis) up to 60% were achieved in the 1.5 ton-per-day PDU, far exceeding the initial target/forecast of 40% oil yields. Experimental data, based on over forty runs under steady-state conditions, supported by material and energy balances of near-100% closures, have been used to establish a process model which indicates that oil yields well in excess of 60% (dry basis) can be achieved in a commercial reactor. Experimental results demonstrate a gross product thermal efficiency of 94% and a net product thermal efficiency of 72% or more; the highest values yet achieved with a large-scale biomass liquefaction process. A conceptual manufacturing process and an economic analysis for liquid biofuel production at 60% oil yield from a 200-TPD commercial plant is reported. The plant appears to be profitable at contemporary fuel costs of $21/barrel oil-equivalent. Total capital investment is estimated at under $2.5 million. A rate-of-return on investment of 39.4% and a pay-out period of 2.1 years has been estimated. The manufacturing cost of the combustible pyrolysis oil is $2.70 per gigajoule. 20 figs., 87 tabs.

  4. Research Regarding the Anticorosiv Protection of Atmospheric and Vacuum Distillation Unit that Process Crude Oil

    Directory of Open Access Journals (Sweden)

    M. Morosanu

    2011-12-01

    Full Text Available Due to high boiling temperature, organic acids are present in the warmer areas of metal equipment from atmospheric and vacuum distillation units and determine, increased corrosion processes in furnace tubes, transfer lines, metal equipment within the distillation columns etc. In order to protect the corrosion of metal equipment from atmospheric and vacuum distillation units, against acids, de authors researched solution which integrates corrosion inhibitors and selecting materials for equipment construction. For this purpose, we tested the inhibitor PET 1441, which has dialchilfosfat in his composition and inhibitor based on phosphate ester. In this case, to the metal surface forms a complex phosphorous that forms of high temperature and high fluid speed. In order to form the passive layer and to achieve a 90% protection, we initially insert a shock dose, and in order to ensure further protection there is used a dose of 20 ppm. The check of anticorrosion protection namely the inhibition efficiency is achieved by testing samples made from steel different.

  5. Uranium chemistry research unit

    International Nuclear Information System (INIS)

    Anon.

    1978-01-01

    The initial field of research of this Unit, established in 1973, was the basic co-ordination chemistry of uranium, thorium, copper, cobalt and nickel. Subsequently the interest of the Unit extended to extractive metallurgy relating to these metals. Under the term 'co-ordination chemistry' is understood the interaction of the central transition metal ion with surrounding atoms in its immediate vicinity (within bonding distance) and the influence they have on each other - for example, structural studies for determining the number and arrangement of co-ordinated atoms and spectrophotometric studies to establish how the f electron energy levels of uranium are influenced by the environment. New types of uranium compounds have been synthesized and studied, and the behaviour of uranium ions in non-aqueous systems has also received attention. This work can be applied to the development and study of extractants and new extractive processes for uranium

  6. Overview of the dairy and food processing research conducted at the Dairy and Functional Foods Research Unit, ERRC, and research to develop sustainable food processes

    Science.gov (United States)

    The DFFRU is dedicated to solving critical problems in the utilization of milk and specialty crop byproducts by developing high-quality, value-added functional foods and consumer products. The presentation will give an overview of the research projects that will benefit human health and well-being. ...

  7. The regulatory process, nuclear safety research and the fuel cycle in the United Kingdom

    International Nuclear Information System (INIS)

    Watson, P.

    1996-01-01

    The main legislation governing the safety of nuclear installations in the United Kingdom is the Health and Safety at Work Act 1974 (HSWA) and the associated relevant statutory provisions of the Nuclear Installations Act 1965 (as amended). The HSWA sought to simplify and unify all industrial safety legislation and set in place the Health and Safety Commission (HSC) and its executive arm, the Health and Safety Executive (HSE). The Health and Safety Executive's Nuclear Safety Division (NSD) regulates the nuclear activities on such sites through HM Nuclear Installations Inspectorate (NII). Under the Nuclear Installations Act (NIA) no corporate body may use any site for the purpose of installing or operating any reactor, other than such a reactor comprised in a means of transport, or other prescribed installation unless the operator has been granted a nuclear site licence by the Health and Safety Executive. Nuclear fuel cycle facilities are examples of such prescribed installations. (J.P.N.)

  8. Sono-leather technology with ultrasound: a boon for unit operations in leather processing - review of our research work at Central Leather Research Institute (CLRI), India.

    Science.gov (United States)

    Sivakumar, Venkatasubramanian; Swaminathan, Gopalaraman; Rao, Paruchuri Gangadhar; Ramasami, Thirumalachari

    2009-01-01

    Ultrasound is a sound wave with a frequency above the human audible range of 16 Hz to 16 kHz. In recent years, numerous unit operations involving physical as well as chemical processes are reported to have been enhanced by ultrasonic irradiation. There have been benefits such as improvement in process efficiency, process time reduction, performing the processes under milder conditions and avoiding the use of some toxic chemicals to achieve cleaner processing. These could be a better way of augmentation for the processes as an advanced technique. The important point here is that ultrasonic irradiation is physical method activation rather than using chemical entities. Detailed studies have been made in the unit operations related to leather such as diffusion rate enhancement through porous leather matrix, cleaning, degreasing, tanning, dyeing, fatliquoring, oil-water emulsification process and solid-liquid tannin extraction from vegetable tanning materials as well as in precipitation reaction in wastewater treatment. The fundamental mechanism involved in these processes is ultrasonic cavitation in liquid media. In addition to this there also exist some process specific mechanisms for the enhancement of the processes. For instance, possible real-time reversible pore-size changes during ultrasound propagation through skin/leather matrix could be a reason for diffusion rate enhancement in leather processing as reported for the first time. Exhaustive scientific research work has been carried out in this area by our group working in Chemical Engineering Division of CLRI and most of these benefits have been proven with publications in valued peer-reviewed international journals. The overall results indicate that about 2-5-fold increase in the process efficiency due to ultrasound under the given process conditions for various unit operations with additional benefits. Scale-up studies are underway for converting these concepts in to a real viable larger scale operation. In

  9. Implementing evidence in an onco-haematology nursing unit: a process of change using participatory action research.

    Science.gov (United States)

    Abad-Corpa, Eva; Delgado-Hito, Pilar; Cabrero-García, Julio; Meseguer-Liza, Cristobal; Zárate-Riscal, Carmen Lourdes; Carrillo-Alcaraz, Andrés; Martínez-Corbalán, José Tomás; Caravaca-Hernández, Amor

    2013-03-01

    To implement evidence in a nursing unit and to gain a better understanding of the experience of change within a participatory action research. Study design of a participatory action research type was use from the constructivist paradigm. The analytical-methodological decisions were inspired by Checkland Flexible Systems for evidence implementation in the nursing unit. The study was carried out between March and November 2007 in the isolation unit section for onco-haematological patients in a tertiary level general university hospital in Spain. Accidental sampling was carried out with the participation of six nurses. Data were collected using five group meetings and individual reflections in participants' dairies. The participant observation technique was also carried out by researchers. Data analysis was carried out by content analysis. The rigorous criteria were used: credibility, confirmability, dependence, transferability and reflexivity. A lack of use of evidence in clinical practice is the main problem. The factors involved were identified (training, values, beliefs, resources and professional autonomy). Their daily practice (complexity in taking decisions, variability, lack of professional autonomy and safety) was compared with an ideal situation (using evidence it will be possible to normalise practice and to work more effectively in teams by increasing safety and professional recognition). It was decided to create five working areas about several clinical topics (mucositis, pain, anxiety, satisfaction, nutritional assessment, nauseas and vomiting, pressure ulcers and catheter-related problems) and seven changes in clinical practice were agreed upon together with 11 implementation strategies. Some reflections were made about the features of the study: the changes produced; the strategies used and how to improve them; the nursing 'subculture'; attitudes towards innovation; and the commitment as participants in the study and as healthcare professionals. The

  10. INDEPENDENT TECHNICAL ASSESSMENT OF MANAGEMENT OF STORMWATER AND WASTEWATER AT THE SEPARATIONS PROCESS RESEARCH UNIT (SPRU) DISPOSITION PROJECT, NEW YORK

    Energy Technology Data Exchange (ETDEWEB)

    Abitz, R.; Jackson, D.; Eddy-Dilek, C.

    2011-06-27

    The U.S. Department of Energy (DOE) is currently evaluating the water management procedures at the Separations Process Research Unit (SPRU). The facility has three issues related to water management that require technical assistance: (1) due to a excessive rainfall event in October, 2010, contaminated water collected in basements of G2 and H2 buildings. As a result of this event, the contractor has had to collect and dispose of water offsite; (2) The failure of a sump pump at a KAPL outfall resulted in a Notice of Violation issued by the New York State Department of Environment and Conservation (NYSDEC) and subsequent Consent Order. On-site water now requires treatment and off-site disposition; and (3) stormwater infiltration has resulted in Strontium-90 levels discharged to the storm drains that exceed NR standards. The contractor has indicated that water management at SPRU requires major staff resources (at least 50 persons). The purpose of this review is to determine if the contractor's technical approach warrants the large number of staff resources and to ensure that the technical approach is compliant and in accordance with federal, state and NR requirements.

  11. Application Technology Research Unit

    Data.gov (United States)

    Federal Laboratory Consortium — To conduct fundamental and developmental research on new and improved application technologies to protect floricultural, nursery, landscape, turf, horticultural, and...

  12. Developmental process and early phases of implementation for the United States Interagency Committee on Human Nutrition Research National Nutrition Research Roadmap

    Science.gov (United States)

    The United States Congress first called for improved coordination of human nutrition research within and among federal departments and agencies in the 1977 Farm Bill. Today, the Interagency Committee on Human Nutrition Research (ICHNR) is charged with improving the planning, coordination, and commu...

  13. The Uranium Chemistry Research Unit

    International Nuclear Information System (INIS)

    Anon.

    1983-01-01

    The article discusses the research work done at the Uranium Chemistry Research Unit of the University of Port Elizabeth. The initial research programme dealt with fundamental aspects of uranium chemistry. New uranium compounds were synthesized and their chemical properties were studied. Research was also done to assist the mining industry, as well as on nuclear medicine. Special mentioning is made of the use of technetium for medical diagnosis and therapy

  14. Design and construction of coal/biomass to liquids (CBTL) process development unit (PDU) at the University of Kentucky Center for Applied Energy Research (CAER)

    Energy Technology Data Exchange (ETDEWEB)

    Placido, Andrew [Univ. of Kentucky, Lexington, KY (United States); Liu, Kunlei [Univ. of Kentucky, Lexington, KY (United States); Challman, Don [Univ. of Kentucky, Lexington, KY (United States); Andrews, Rodney [Univ. of Kentucky, Lexington, KY (United States); Jacques, David [Univ. of Kentucky, Lexington, KY (United States)

    2015-10-30

    This report describes a first phase of a project to design, construct and commission an integrated coal/biomass-to-liquids facility at a capacity of 1 bbl. /day at the University of Kentucky Center for Applied Energy Research (UK-CAER) – specifically for construction of the building and upstream process units for feed handling, gasification, and gas cleaning, conditioning and compression. The deliverables from the operation of this pilot plant [when fully equipped with the downstream process units] will be firstly the liquid FT products and finished fuels which are of interest to UK-CAER’s academic, government and industrial research partners. The facility will produce research quantities of FT liquids and finished fuels for subsequent Fuel Quality Testing, Performance and Acceptability. Moreover, the facility is expected to be employed for a range of research and investigations related to: Feed Preparation, Characteristics and Quality; Coal and Biomass Gasification; Gas Clean-up/ Conditioning; Gas Conversion by FT Synthesis; Product Work-up and Refining; Systems Analysis and Integration; and Scale-up and Demonstration. Environmental Considerations - particularly how to manage and reduce carbon dioxide emissions from CBTL facilities and from use of the fuels - will be a primary research objectives. Such a facility has required significant lead time for environmental review, architectural/building construction, and EPC services. UK, with DOE support, has advanced the facility in several important ways. These include: a formal EA/FONSI, and permits and approvals; construction of a building; selection of a range of technologies and vendors; and completion of the upstream process units. The results of this project are the FEED and detailed engineering studies, the alternate configurations and the as-built plant - its equipment and capabilities for future research and demonstration and its adaptability for re-purposing to meet other needs. These are described in

  15. An Evaluation of the Quality of the Desinfection Process in Inanimated Surfaces of Basic Health Units by Biomarkers Research

    Directory of Open Access Journals (Sweden)

    Ana Paula Bandeira Fucci

    2013-06-01

    Full Text Available Infection Related Health Care – IRHC may occur by exogenous transmission through the contamination of contaminated surfaces. This study aimed at verifying the quality of the process of disinfecting inanimate surfaces of Basic Health Units – BHU in a northeastern city in São Paulo state, through the presence of biomarkers, Staphylococcus aureus and Escherichia coli. We evaluated 7 UBS in random times and days, covering the following areas: dressing-room doorknob, drinking fountains and faucets, office desk, reception counter. Sterile swabs were rubbed on a 20 cm2 surface and transported to the laboratory in Stuart medium to the Clinical Analyses Didactic Laboratory of UNIFEV. The samples were cultured on Blood agar and MacConkey agar at 35 ± 1oC for 24 hours in aerobic and microaerophilic jar, respectively. Staphylococcus aureus was identified by the production of hemolysin, catalase and coagulase. Escherichia coli was identified using the biochemical tests: TSI, citrate, urease, indole, lysine, ornithine and arginine. Of the 105 samples analyzed, 6.66% of the samples were positive for Staphylococcus aureus and Escherichia coli to 2.85%. The Areas which showed the presence of biomarkers were: the reception booth, booth pharmacy, handles of the dressing room, dressing room faucet and drinking fountain. These results corroborate other studies that show that inanimate surfaces are important sources of contamination in the healthcare environment, contributing to crosscontamination and, consequently, to the increase of infection to the patient who is subjected to procedures in this environment. Within this context, government, by means of public health policies, is responsible for the training of health professionals, contributing to the promotion and prevention of public health

  16. Research in Stochastic Processes.

    Science.gov (United States)

    1982-10-31

    Office of Scientific Research Grant AFOSR F49620 82 C 0009 Period: 1 Noveber 1981 through 31 October 1982 Title: Research in Stochastic Processes Co...STA4ATIS CAMBANIS The work briefly described here was developed in connection with problems arising from and related to the statistical comunication

  17. Research Planning Process

    Science.gov (United States)

    Lofton, Rodney

    2010-01-01

    This presentation describes the process used to collect, review, integrate, and assess research requirements desired to be a part of research and payload activities conducted on the ISS. The presentation provides a description of: where the requirements originate, to whom they are submitted, how they are integrated into a requirements plan, and how that integrated plan is formulated and approved. It is hoped that from completing the review of this presentation, one will get an understanding of the planning process that formulates payload requirements into an integrated plan used for specifying research activities to take place on the ISS.

  18. The Serendipitous Research Process

    Science.gov (United States)

    Nutefall, Jennifer E.; Ryder, Phyllis Mentzell

    2010-01-01

    This article presents the results of an exploratory study asking faculty in the first-year writing program and instruction librarians about their research process focusing on results specifically related to serendipity. Steps to prepare for serendipity are highlighted as well as a model for incorporating serendipity into a first-year writing…

  19. On Tour... Primary Hardwood Processing, Products and Recycling Unit

    Science.gov (United States)

    Philip A. Araman; Daniel L. Schmoldt

    1995-01-01

    Housed within the Department of Wood Science and Forest Products at Virginia Polytechnic Institute is a three-person USDA Forest Service research work unit (with one vacancy) devoted to hardwood processing and recycling research. Phil Araman is the project leader of this truly unique and productive unit, titled ãPrimary Hardwood Processing, Products and Recycling.ä The...

  20. Clinical Epidemiology Unit - overview of research areas

    Science.gov (United States)

    Clinical Epidemiology Unit (CEU) conducts etiologic research with potential clinical and public health applications, and leads studies evaluating population-based early detection and cancer prevention strategies

  1. Judicial Process, Grade Eight. Resource Unit (Unit V).

    Science.gov (United States)

    Minnesota Univ., Minneapolis. Project Social Studies Curriculum Center.

    This resource unit, developed by the University of Minnesota's Project Social Studies, introduces eighth graders to the judicial process. The unit was designed with two major purposes in mind. First, it helps pupils understand judicial decision-making, and second, it provides for the study of the rights guaranteed by the federal Constitution. Both…

  2. The Executive Process, Grade Eight. Resource Unit (Unit III).

    Science.gov (United States)

    Minnesota Univ., Minneapolis. Project Social Studies Curriculum Center.

    This resource unit, developed by the University of Minnesota's Project Social Studies, introduces eighth graders to the executive process. The unit uses case studies of presidential decision making such as the decision to drop the atomic bomb on Hiroshima, the Cuba Bay of Pigs and quarantine decisions, and the Little Rock decision. A case study of…

  3. Image processing unit with fall-back.

    NARCIS (Netherlands)

    2011-01-01

    An image processing unit ( 100,200,300 ) for computing a sequence of output images on basis of a sequence of input images, comprises: a motion estimation unit ( 102 ) for computing a motion vector field on basis of the input images; a quality measurement unit ( 104 ) for computing a value of a

  4. Advanced Biofuels Processing Development Unit

    Data.gov (United States)

    Federal Laboratory Consortium — The ABPDU at LBNL has a unique mission to partner with industry, National Labs, Bioenergy Research Centers, and academia to optimize, integrate and scale production...

  5. Process research and development

    Science.gov (United States)

    Bickler, D. B.

    1986-01-01

    The following major processes involved in the production of crystalline-silicon solar cells were discussed: surface preparation, junction formation, metallization, and assembly. The status of each of these processes, and the sequence in which these processes are applied, were described as they were in 1975, as they were in 1985, and what they might be in the future.

  6. Mapping the Collaborative Research Process

    Science.gov (United States)

    Kochanek, Julie Reed; Scholz, Carrie; Garcia, Alicia N.

    2015-01-01

    Despite significant federal investments in the production of high-quality education research, the direct use of that research in policy and practice is not evident. Some education researchers are increasingly employing collaborative research models that use structures and processes to integrate practitioners into the research process in an effort…

  7. The United Nuclear Research Institute

    International Nuclear Information System (INIS)

    Kiss, D.

    1978-01-01

    The UNRI, the only common institute of the socialist countries was founded in 1956 in Dubna. The scientists of small countries have the opportunity to take part in fundamental research with very expensive devices which are usually not available for them. There are six research laboratories and one department in the UNRI namely: the theoretical physical laboratory; the laboratory of high energies - there is a synchrophasotron of 1a GeV there; the laboratory of nuclear problems - there is a synchrocyclotron of 680 MeV there; the laboratory of nuclear reactions with the cyclotron U-300 which can accelerate heavy ions; the neutronphysical laboratory with the impulse reactor IBM-30; the laboratory of computation and automatization with two big computers; the department of new acceleration methods. The main results obtained by Hungarian scientist in Dubna are described. (V.N.)

  8. Portable brine evaporator unit, process, and system

    Science.gov (United States)

    Hart, Paul John; Miller, Bruce G.; Wincek, Ronald T.; Decker, Glenn E.; Johnson, David K.

    2009-04-07

    The present invention discloses a comprehensive, efficient, and cost effective portable evaporator unit, method, and system for the treatment of brine. The evaporator unit, method, and system require a pretreatment process that removes heavy metals, crude oil, and other contaminates in preparation for the evaporator unit. The pretreatment and the evaporator unit, method, and system process metals and brine at the site where they are generated (the well site). Thus, saving significant money to producers who can avoid present and future increases in transportation costs.

  9. Telecommunication market research processing

    Science.gov (United States)

    Dupont, J. F.

    1983-06-01

    The data processing in two telecommunication market investigations is described. One of the studies concerns the office applications of communication and the other the experiences with a videotex terminal. Statistical factorial analysis was performed on a large mass of data. A comparison between utilization intentions and effective utilization is made. Extensive rewriting of statistical analysis computer programs was required.

  10. Stages in the research process.

    Science.gov (United States)

    Gelling, Leslie

    2015-03-04

    Research should be conducted in a systematic manner, allowing the researcher to progress from a general idea or clinical problem to scientifically rigorous research findings that enable new developments to improve clinical practice. Using a research process helps guide this process. This article is the first in a 26-part series on nursing research. It examines the process that is common to all research, and provides insights into ten different stages of this process: developing the research question, searching and evaluating the literature, selecting the research approach, selecting research methods, gaining access to the research site and data, pilot study, sampling and recruitment, data collection, data analysis, and dissemination of results and implementation of findings.

  11. Research at the Dairy and Functional Foods Research Unit

    Science.gov (United States)

    Dr. Peggy Tomasula is Research Leader of the Dairy and Functional Foods Research Unit (DFFRU), ARS, USDA, Wyndmoor, PA, a group that includes 11 Research Scientists, 4 of whom are Lead Scientists (LS), 13 support scientists, and 3 Retired Collaborators. The mission of the DFFRU is to solve critical ...

  12. Process Improvement for Interinstitutional Research Contracting.

    Science.gov (United States)

    Varner, Michael; Logan, Jennifer; Bjorklund, Todd; Whitfield, Jesse; Reed, Peggy; Lesher, Laurie; Sikalis, Amy; Brown, Brent; Drollinger, Sandy; Larrabee, Kristine; Thompson, Kristie; Clark, Erin; Workman, Michael; Boi, Luca

    2015-08-01

    Sponsored research increasingly requires multiinstitutional collaboration. However, research contracting procedures have become more complicated and time consuming. The perinatal research units of two colocated healthcare systems sought to improve their research contracting processes. The Lean Process, a management practice that iteratively involves team members in root cause analyses and process improvement, was applied to the research contracting process, initially using Process Mapping and then developing Problem Solving Reports. Root cause analyses revealed that the longest delays were the individual contract legal negotiations. In addition, the "business entity" was the research support personnel of both healthcare systems whose "customers" were investigators attempting to conduct interinstitutional research. Development of mutually acceptable research contract templates and language, chain of custody templates, and process development and refinement formats decreased the Notice of Grant Award to Purchase Order time from a mean of 103.5 days in the year prior to Lean Process implementation to 45.8 days in the year after implementation (p = 0.004). The Lean Process can be applied to interinstitutional research contracting with significant improvement in contract implementation. © 2015 Wiley Periodicals, Inc.

  13. Nontraditional machining processes research advances

    CERN Document Server

    2013-01-01

    Nontraditional machining employs processes that remove material by various methods involving thermal, electrical, chemical and mechanical energy or even combinations of these. Nontraditional Machining Processes covers recent research and development in techniques and processes which focus on achieving high accuracies and good surface finishes, parts machined without burrs or residual stresses especially with materials that cannot be machined by conventional methods. With applications to the automotive, aircraft and mould and die industries, Nontraditional Machining Processes explores different aspects and processes through dedicated chapters. The seven chapters explore recent research into a range of topics including laser assisted manufacturing, abrasive water jet milling and hybrid processes. Students and researchers will find the practical examples and new processes useful for both reference and for developing further processes. Industry professionals and materials engineers will also find Nontraditional M...

  14. Data Sorting Using Graphics Processing Units

    Directory of Open Access Journals (Sweden)

    M. J. Mišić

    2012-06-01

    Full Text Available Graphics processing units (GPUs have been increasingly used for general-purpose computation in recent years. The GPU accelerated applications are found in both scientific and commercial domains. Sorting is considered as one of the very important operations in many applications, so its efficient implementation is essential for the overall application performance. This paper represents an effort to analyze and evaluate the implementations of the representative sorting algorithms on the graphics processing units. Three sorting algorithms (Quicksort, Merge sort, and Radix sort were evaluated on the Compute Unified Device Architecture (CUDA platform that is used to execute applications on NVIDIA graphics processing units. Algorithms were tested and evaluated using an automated test environment with input datasets of different characteristics. Finally, the results of this analysis are briefly discussed.

  15. Semi-automatic film processing unit

    International Nuclear Information System (INIS)

    Mohamad Annuar Assadat Husain; Abdul Aziz Bin Ramli; Mohd Khalid Matori

    2005-01-01

    The design concept applied in the development of an semi-automatic film processing unit needs creativity and user support in channelling the required information to select materials and operation system that suit the design produced. Low cost and efficient operation are the challenges that need to be faced abreast with the fast technology advancement. In producing this processing unit, there are few elements which need to be considered in order to produce high quality image. Consistent movement and correct time coordination for developing and drying are a few elements which need to be controlled. Other elements which need serious attentions are temperature, liquid density and the amount of time for the chemical liquids to react. Subsequent chemical reaction that take place will cause the liquid chemical to age and this will adversely affect the quality of image produced. This unit is also equipped with liquid chemical drainage system and disposal chemical tank. This unit would be useful in GP clinics especially in rural area which practice manual system for developing and require low operational cost. (Author)

  16. Toxic Hazards Research Unit Annual Report: 1986

    Science.gov (United States)

    1987-04-01

    mediated hemolysis by mercapto compounds. Journal of Applied Toxicology, Volume 6, Number 5, pages 336-370, 1986. Hydrophobic tributyltin ( TBT ...7 ~OF~ AAMRL-TR-87-020 NMRI-87-2 ’~LRES 4 Iq 1986 TOXIC HAZARDS RESEARCH UNIT ANNUAL REPORT WILLIAM E. HOUSTON, Ph.D. RAYMOND S. KUTZMAN, Ph.D...and is approved for publication. FOR THE COMMANDElRi BRUCE 0. STUART, Ph.D. Director, Toxic Hazards Division Harry G. Armstrong Aerospace Medical

  17. Instruction Set Architectures for Quantum Processing Units

    OpenAIRE

    Britt, Keith A.; Humble, Travis S.

    2017-01-01

    Progress in quantum computing hardware raises questions about how these devices can be controlled, programmed, and integrated with existing computational workflows. We briefly describe several prominent quantum computational models, their associated quantum processing units (QPUs), and the adoption of these devices as accelerators within high-performance computing systems. Emphasizing the interface to the QPU, we analyze instruction set architectures based on reduced and complex instruction s...

  18. Micromagnetic simulations using Graphics Processing Units

    International Nuclear Information System (INIS)

    Lopez-Diaz, L; Aurelio, D; Torres, L; Martinez, E; Hernandez-Lopez, M A; Gomez, J; Alejos, O; Carpentieri, M; Finocchio, G; Consolo, G

    2012-01-01

    The methodology for adapting a standard micromagnetic code to run on graphics processing units (GPUs) and exploit the potential for parallel calculations of this platform is discussed. GPMagnet, a general purpose finite-difference GPU-based micromagnetic tool, is used as an example. Speed-up factors of two orders of magnitude can be achieved with GPMagnet with respect to a serial code. This allows for running extensive simulations, nearly inaccessible with a standard micromagnetic solver, at reasonable computational times. (topical review)

  19. Engaged Research in Process Improvement

    DEFF Research Database (Denmark)

    Pries-Heje, Jan

    2010-01-01

    This keynote initiates from an example of engaged research; a Danish software house that made it from maturity level 1 to 5 in eight years. The organizational change implied at each step is discussed and a design theory of process improvement and change derived.......This keynote initiates from an example of engaged research; a Danish software house that made it from maturity level 1 to 5 in eight years. The organizational change implied at each step is discussed and a design theory of process improvement and change derived....

  20. High Input Voltage, Silicon Carbide Power Processing Unit Performance Demonstration

    Science.gov (United States)

    Bozak, Karin E.; Pinero, Luis R.; Scheidegger, Robert J.; Aulisio, Michael V.; Gonzalez, Marcelo C.; Birchenough, Arthur G.

    2015-01-01

    A silicon carbide brassboard power processing unit has been developed by the NASA Glenn Research Center in Cleveland, Ohio. The power processing unit operates from two sources: a nominal 300 Volt high voltage input bus and a nominal 28 Volt low voltage input bus. The design of the power processing unit includes four low voltage, low power auxiliary supplies, and two parallel 7.5 kilowatt (kW) discharge power supplies that are capable of providing up to 15 kilowatts of total power at 300 to 500 Volts (V) to the thruster. Additionally, the unit contains a housekeeping supply, high voltage input filter, low voltage input filter, and master control board, such that the complete brassboard unit is capable of operating a 12.5 kilowatt Hall effect thruster. The performance of the unit was characterized under both ambient and thermal vacuum test conditions, and the results demonstrate exceptional performance with full power efficiencies exceeding 97%. The unit was also tested with a 12.5kW Hall effect thruster to verify compatibility and output filter specifications. With space-qualified silicon carbide or similar high voltage, high efficiency power devices, this would provide a design solution to address the need for high power electric propulsion systems.

  1. Research of the value of linear distortion of renewable surface of part during rotary processing of bulky items without dismantling unit

    Science.gov (United States)

    Bondarenko, J. A.; Fedorenko, M. A.; Pogonin, A. A.

    2018-03-01

    The loading and unloading units and grinding mills of raw devices have internal cone type or pipe screw perceive load of incoming and outgoing material. The main part of the support assembly is a pin. Mounting seats for the pipe screws cone have traces of deformation and work hardening, while they themselves have wear of pins and deformation of the inner and outer cylindrical working surface. In the mill body, there are constantly acting dynamic forces causing vibration, which are transmitted to the stud and inner accelerating elements. Under the influence of stress and vibration, the housing spigot is in the stress-compressed state and stretched vertically and horizontally. As a result, the insertion element is deformed and weakened in the fixture. A moving element appears in the gap leading to the fact that it drops lfeedstock and under the influence of variable loads it is destroyed, as well as the seating surfaces of the insert pin member.

  2. Partial wave analysis using graphics processing units

    Energy Technology Data Exchange (ETDEWEB)

    Berger, Niklaus; Liu Beijiang; Wang Jike, E-mail: nberger@ihep.ac.c [Institute of High Energy Physics, Chinese Academy of Sciences, 19B Yuquan Lu, Shijingshan, 100049 Beijing (China)

    2010-04-01

    Partial wave analysis is an important tool for determining resonance properties in hadron spectroscopy. For large data samples however, the un-binned likelihood fits employed are computationally very expensive. At the Beijing Spectrometer (BES) III experiment, an increase in statistics compared to earlier experiments of up to two orders of magnitude is expected. In order to allow for a timely analysis of these datasets, additional computing power with short turnover times has to be made available. It turns out that graphics processing units (GPUs) originally developed for 3D computer games have an architecture of massively parallel single instruction multiple data floating point units that is almost ideally suited for the algorithms employed in partial wave analysis. We have implemented a framework for tensor manipulation and partial wave fits called GPUPWA. The user writes a program in pure C++ whilst the GPUPWA classes handle computations on the GPU, memory transfers, caching and other technical details. In conjunction with a recent graphics processor, the framework provides a speed-up of the partial wave fit by more than two orders of magnitude compared to legacy FORTRAN code.

  3. Graphics Processing Units for HEP trigger systems

    International Nuclear Information System (INIS)

    Ammendola, R.; Bauce, M.; Biagioni, A.; Chiozzi, S.; Cotta Ramusino, A.; Fantechi, R.; Fiorini, M.; Giagu, S.; Gianoli, A.; Lamanna, G.; Lonardo, A.; Messina, A.

    2016-01-01

    General-purpose computing on GPUs (Graphics Processing Units) is emerging as a new paradigm in several fields of science, although so far applications have been tailored to the specific strengths of such devices as accelerator in offline computation. With the steady reduction of GPU latencies, and the increase in link and memory throughput, the use of such devices for real-time applications in high-energy physics data acquisition and trigger systems is becoming ripe. We will discuss the use of online parallel computing on GPU for synchronous low level trigger, focusing on CERN NA62 experiment trigger system. The use of GPU in higher level trigger system is also briefly considered.

  4. Graphics Processing Units for HEP trigger systems

    Energy Technology Data Exchange (ETDEWEB)

    Ammendola, R. [INFN Sezione di Roma “Tor Vergata”, Via della Ricerca Scientifica 1, 00133 Roma (Italy); Bauce, M. [INFN Sezione di Roma “La Sapienza”, P.le A. Moro 2, 00185 Roma (Italy); University of Rome “La Sapienza”, P.lee A.Moro 2, 00185 Roma (Italy); Biagioni, A. [INFN Sezione di Roma “La Sapienza”, P.le A. Moro 2, 00185 Roma (Italy); Chiozzi, S.; Cotta Ramusino, A. [INFN Sezione di Ferrara, Via Saragat 1, 44122 Ferrara (Italy); University of Ferrara, Via Saragat 1, 44122 Ferrara (Italy); Fantechi, R. [INFN Sezione di Pisa, Largo B. Pontecorvo 3, 56127 Pisa (Italy); CERN, Geneve (Switzerland); Fiorini, M. [INFN Sezione di Ferrara, Via Saragat 1, 44122 Ferrara (Italy); University of Ferrara, Via Saragat 1, 44122 Ferrara (Italy); Giagu, S. [INFN Sezione di Roma “La Sapienza”, P.le A. Moro 2, 00185 Roma (Italy); University of Rome “La Sapienza”, P.lee A.Moro 2, 00185 Roma (Italy); Gianoli, A. [INFN Sezione di Ferrara, Via Saragat 1, 44122 Ferrara (Italy); University of Ferrara, Via Saragat 1, 44122 Ferrara (Italy); Lamanna, G., E-mail: gianluca.lamanna@cern.ch [INFN Sezione di Pisa, Largo B. Pontecorvo 3, 56127 Pisa (Italy); INFN Laboratori Nazionali di Frascati, Via Enrico Fermi 40, 00044 Frascati (Roma) (Italy); Lonardo, A. [INFN Sezione di Roma “La Sapienza”, P.le A. Moro 2, 00185 Roma (Italy); Messina, A. [INFN Sezione di Roma “La Sapienza”, P.le A. Moro 2, 00185 Roma (Italy); University of Rome “La Sapienza”, P.lee A.Moro 2, 00185 Roma (Italy); and others

    2016-07-11

    General-purpose computing on GPUs (Graphics Processing Units) is emerging as a new paradigm in several fields of science, although so far applications have been tailored to the specific strengths of such devices as accelerator in offline computation. With the steady reduction of GPU latencies, and the increase in link and memory throughput, the use of such devices for real-time applications in high-energy physics data acquisition and trigger systems is becoming ripe. We will discuss the use of online parallel computing on GPU for synchronous low level trigger, focusing on CERN NA62 experiment trigger system. The use of GPU in higher level trigger system is also briefly considered.

  5. Research of Houjiayao Unit in North China

    Science.gov (United States)

    Ji, Y.

    2012-12-01

    "Houjiayao Group" is the standard stratigraphic unit of late Pleistocene in northern China, which was created by Jia Lanpo and Wei Qi during their research on Houjiayao site. Based on the mammal, ancient human fossils and Paleolithic features, "Houjiayao Group" was thought as late Pleistocene sediments. "Houjiayao Group" was defined as late Pleistocene stratigraphic units. However, the problems of the age of "Houjiayao Group", stratigraphic division and other issues, have not yet been well resolved. These issues include: the differences of age-dating results, the unclear comparison between stratigraphic units and regional contrast, the uncertain relationship between "Houjiayao Group" and "Nihewan Layer ", and so on. Houjiayao site which located in the southeast of Houjiayao village in Dongjingji town Yangyuan County, Hebei province of China, is a very important paleolithic site. But some researches show that Houjiayao site is located at the 3th terrace of Liyigou valley and there are many opinions about the age of Houjiayao site, which varies from 20-500 thousand years. Combined with former research results and many research methods, our study was mainly focused on the key problems existing in the study of "Houjiayao Group". Through the use of sequence stratigraphy, chronostratigraphy, biostratigraphy and other theoretical methods, stratigraphic section was studied in the late Pleistocene stratigraphy and sedimentary environment. Through environmental indicators and the age-dating tests, the evolution of ancient geography and environment were identified elementarily. After analyzing informations of this area, geomorphologic investigation and stratum comparation in and around Houjiayao site were done. Houjiayao site is located on the west bank of Liyigou river, which has a tributary named Black Stone River. Two or three layers of volcanic materials were found in this area, those sediments are from a buried paleovolcano in upstream of Black Stone River. The volcanic

  6. United States Domestic Research Reactor Infrastructure TRIGA Reactor Fuel Support

    International Nuclear Information System (INIS)

    Morrell, Douglas

    2011-01-01

    The United State Domestic Research Reactor Infrastructure Program at the Idaho National Laboratory manages and provides project management, technical, quality engineering, quality inspection and nuclear material support for the United States Department of Energy sponsored University Reactor Fuels Program. This program provides fresh, unirradiated nuclear fuel to Domestic University Research Reactor Facilities and is responsible for the return of the DOE-owned, irradiated nuclear fuel over the life of the program. This presentation will introduce the program management team, the universities supported by the program, the status of the program and focus on the return process of irradiated nuclear fuel for long term storage at DOE managed receipt facilities. It will include lessons learned from research reactor facilities that have successfully shipped spent fuel elements to DOE receipt facilities.

  7. Conducting qualitative research within Clinical Trials Units: avoiding potential pitfalls.

    Science.gov (United States)

    Cooper, Cindy; O'Cathain, Alicia; Hind, Danny; Adamson, Joy; Lawton, Julia; Baird, Wendy

    2014-07-01

    The value of using qualitative research within or alongside randomised controlled trials (RCTs) is becoming more widely accepted. Qualitative research may be conducted concurrently with pilot or full RCTs to understand the feasibility and acceptability of the interventions being tested, or to improve trial conduct. Clinical Trials Units (CTUs) in the United Kingdom (UK) manage large numbers of RCTs and, increasingly, manage the qualitative research or collaborate with qualitative researchers external to the CTU. CTUs are beginning to explicitly manage the process, for example, through the use of standard operating procedures for designing and implementing qualitative research with trials. We reviewed the experiences of two UK Clinical Research Collaboration (UKCRC) registered CTUs of conducting qualitative research concurrently with RCTs. Drawing on experiences gained from 15 studies, we identify the potential for the qualitative research to undermine the successful completion or scientific integrity of RCTs. We show that potential problems can arise from feedback of interim or final qualitative findings to members of the trial team or beyond, in particular reporting qualitative findings whilst the trial is on-going. The problems include: We make recommendations for improving the management of qualitative research within CTUs. Copyright © 2014. Published by Elsevier Inc.

  8. Traditional machining processes research advances

    CERN Document Server

    2015-01-01

    This book collects several examples of research in machining processes. Chapter 1 provides information on polycrystalline diamond tool material and its emerging applications. Chapter 2 is dedicated to the analysis of orthogonal cutting experiments using diamond-coated tools with force and temperature measurements. Chapter 3 describes the estimation of cutting forces and tool wear using modified mechanistic models in high performance turning. Chapter 4 contains information on cutting under gas shields for industrial applications. Chapter 5 is dedicated to the machinability of magnesium and its alloys. Chapter 6 provides information on grinding science. Finally, chapter 7 is dedicated to flexible integration of shape and functional modelling of machine tool spindles in a design framework.    

  9. Integration Process for the Habitat Demonstration Unit

    Science.gov (United States)

    Gill, Tracy; Merbitz, Jerad; Kennedy, Kriss; Tri, Terry; Howe, A. Scott

    2010-01-01

    The Habitat Demonstration Unit (HDU) is an experimental exploration habitat technology and architecture test platform designed for analog demonstration activities The HDU project has required a team to integrate a variety of contributions from NASA centers and outside collaborators and poses a challenge in integrating these disparate efforts into a cohesive architecture To complete the development of the HDU from conception in June 2009 to rollout for operations in July 2010, a cohesive integration strategy has been developed to integrate the various systems of HDU and the payloads, such as the Geology Lab, that those systems will support The utilization of interface design standards and uniquely tailored reviews have allowed for an accelerated design process Scheduled activities include early fit-checks and the utilization of a Habitat avionics test bed prior to equipment installation into HDU A coordinated effort to utilize modeling and simulation systems has aided in design and integration concept development Modeling tools have been effective in hardware systems layout, cable routing and length estimation, and human factors analysis Decision processes on the shell development including the assembly sequence and the transportation have been fleshed out early on HDU to maximize the efficiency of both integration and field operations Incremental test operations leading up to an integrated systems test allows for an orderly systems test program The HDU will begin its journey as an emulation of a Pressurized Excursion Module (PEM) for 2010 field testing and then may evolve to a Pressurized Core Module (PCM) for 2011 and later field tests, depending on agency architecture decisions The HDU deployment will vary slightly from current lunar architecture plans to include developmental hardware and software items and additional systems called opportunities for technology demonstration One of the HDU challenges has been designing to be prepared for the integration of

  10. Development of interface technology between unit processes in E-Refining process

    Energy Technology Data Exchange (ETDEWEB)

    Lee, S. H.; Lee, H. S.; Kim, J. G. [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2010-10-15

    The pyroprocessing is composed mainly four subprocesses, such as an electrolytic reduction, an electrorefining, an electrowinning, and waste salt regeneration/ solidification processes. The electrorefining process, one of main processes which are composed of pyroprocess to recover the useful elements from spent fuel, is under development by Korea Atomic Energy Research Institute as a sub process of pyrochemical treatment of spent PWR fuel. The CERS(Continuous ElectroRefining System) is composed of some unit processes such as an electrorefiner, a salt distiller, a melting furnace for the U-ingot and U-chlorinator (UCl{sub 3} making equipment) as shown in Fig. 1. In this study, the interfaces technology between unit processes in E-Refining system is investigated and developed for the establishment of integrated E-Refining operation system as a part of integrated pyroprocessing

  11. Summary of research on microbiological processes

    International Nuclear Information System (INIS)

    Winters, A.L.

    1992-09-01

    Storage of thermal energy in aquifers has obvious benefits of saving energy and decreasing the consumption of fossil fuels. However, aquifer thermal energy storage (ATES), which involves groundwater aquifers as the storage medium for heat or chill, impinges on the environment. A literature review of pertinent microbiology publications (Hicks and Stewart, 1988) identified the potential for the interaction of ATES systems and microbiological processes to create a source of infectious diseases and the potential for damage to the environment. In addition, the review identified a potential for microbiological processes to develop conditions that would interfere with the operation of an ATES system. As a result of this research effort, investigators from Finland, Germany, Switzerland, and the United States have examined several ATES systems in operation and have observed that the ATES systems studied do not contribute to infectious disease transmission, do not adversely affect the environment, and do not contribute significantly to biofouling or biocorrosion

  12. Summary of research on microbiological processes

    Energy Technology Data Exchange (ETDEWEB)

    Winters, A.L.

    1992-09-01

    Storage of thermal energy in aquifers has obvious benefits of saving energy and decreasing the consumption of fossil fuels. However, aquifer thermal energy storage (ATES), which involves groundwater aquifers as the storage medium for heat or chill, impinges on the environment. A literature review of pertinent microbiology publications (Hicks and Stewart, 1988) identified the potential for the interaction of ATES systems and microbiological processes to create a source of infectious diseases and the potential for damage to the environment. In addition, the review identified a potential for microbiological processes to develop conditions that would interfere with the operation of an ATES system. As a result of this research effort, investigators from Finland, Germany, Switzerland, and the United States have examined several ATES systems in operation and have observed that the ATES systems studied do not contribute to infectious disease transmission, do not adversely affect the environment, and do not contribute significantly to biofouling or biocorrosion.

  13. Modeling of biopharmaceutical processes. Part 2: Process chromatography unit operation

    DEFF Research Database (Denmark)

    Kaltenbrunner, Oliver; McCue, Justin; Engel, Philip

    2008-01-01

    Process modeling can be a useful tool to aid in process development, process optimization, and process scale-up. When modeling a chromatography process, one must first select the appropriate models that describe the mass transfer and adsorption that occurs within the porous adsorbent. The theoret......Process modeling can be a useful tool to aid in process development, process optimization, and process scale-up. When modeling a chromatography process, one must first select the appropriate models that describe the mass transfer and adsorption that occurs within the porous adsorbent...

  14. Uranium alloy forming process research

    International Nuclear Information System (INIS)

    Chow, T.S.; Biesiada, T.A.; Sunwoo, A.; Long, J.; Anklam, T.; Kang, S.W.

    1997-01-01

    The study of modern U-6Nb processes is motivated by the needs to reduce fabrication costs and to improve efficiency in material usage. We have studied two potential options: physical vapor deposition (PVD) for manufacturing near-net-shape U-6Nb, and kinetic-energy metallization (KEM) as a supplemental process for refurbishing recycled parts. In FY 1996, we completed two series of PVD runs and heat treatment analyses, the characterization of the microstructure and mechanical properties, a comparison of the results to data for wrought-processed material, and experimental demonstration of the KEM feasibility process with a wide range of variables (particle materials and sizes, gases and gas pressures, and substrate materials), and computer modeling calculations

  15. Research Education: Perspectives and subjective processes involved in educational research

    Directory of Open Access Journals (Sweden)

    Harm H. Tillema

    2009-10-01

    Full Text Available Educational research acknowledges that researcher’s beliefs and training play a role in framing the outcomes of any study. Research not only consists of defining objectives and following certain methods (search but also of making decisions over the steps taking during the inquiry process (research.Establishing a conceptual framework to guide actions on the subjective processes in research is then crucial to control them. With that purpose in mind we offer researchers and Teacher Educators a heuristic tool to be conscious on the risks that can be taken when immersed in research interpretative process. This instrument could be utilised in PhD programs, masters and research projects.

  16. Materials Processing Research and Development

    Science.gov (United States)

    2010-08-01

    2 2.1.4 The Origins of Microstexture in Duplex Ti Alloys...Controlled Growth and Coarsening ....... 14 2.11 PUBLISHED RESEARCH ON FRICTION STIR WELDING OF SC-MODIFIED AL-ZN-MG-CU EXTRUDED PLATES...14 2.11.1 Friction Stir Welding of Sc

  17. A high arctic experience of uniting research and monitoring

    Science.gov (United States)

    Schmidt, Niels Martin; Christensen, Torben R.; Roslin, Tomas

    2017-07-01

    Monitoring is science keeping our thumb on the pulse of the environment to detect any changes of concern for societies. Basic science is the question-driven search for fundamental processes and mechanisms. Given the firm root of monitoring in human interests and needs, basic sciences have often been regarded as scientifically "purer"—particularly within university-based research communities. We argue that the dichotomy between "research" and "monitoring" is an artificial one, and that this artificial split clouds the definition of scientific goals and leads to suboptimal use of resources. We claim that the synergy between the two scientific approaches is well distilled by science conducted under extreme logistic constraints, when scientists are forced to take full advantage of both the data and the infrastructure available. In evidence of this view, we present our experiences from two decades of uniting research and monitoring at the remote research facility Zackenberg in High Arctic Greenland. For this site, we show how the combination of insights from monitoring with the mechanistic understanding obtained from basic research has yielded the most complete understanding of the system—to the benefit of all, and as an example to follow. We therefore urge scientists from across the continuum from monitoring to research to come together, to disregard old division lines, and to work together to expose a comprehensive picture of ecosystem change and its consequences.

  18. Radioactivity and United Kingdom estuaries: an overview identifying research priorities

    International Nuclear Information System (INIS)

    Hamilton, E.I.; Clifton, R.J.; Stevens, H.E.

    1985-05-01

    The report consists of the results of an evaluation of research priorities for the environmental radioactivity of estuaries, (and near shore waters) of the United Kingdom. The format of this report is:(i) general conclusions for the future requirements for research in the field of environmental radioactivity; (ii) an overview of some specific recommendations for research; and (iii) an appendix in which a comprehensive evaluation of the research priorities for specific areas of research are given. On the basis that man is the prime target for concern and protection, special attention has been given to the environment in the vicinity of the British Nuclear Fuels (BNFL) reprocessing plant at Sellafield, Cumbria, which is the source of major releases of a variety of radionuclides into the natural environment. Subjects covered in the Appendix are: site factors; pathways to man; source term; hot particles; terrestrial inputs; surveys and monitoring; analysis; organics; field versus laboratory data; biology; bioaccumulation factors; some bioaccumulators of radioactivity; bioturbation; bacteria; genetics; natural change; sediment; resuspension; surfaces; Ksub(d) factors; pore liquids; diagenesis and the ageing processes; airborne transport of radionuclides; models; natural radioactivity; public opinion; recreation; the ICRP; the ALARA principle; decommissioning of nuclear power stations; identification of research requirements; environmental radioactivity - the national effort. (U.K.)

  19. Basic Research in the United States.

    Science.gov (United States)

    Handler, Philip

    1979-01-01

    Presents a discussion of the development of basic research in the U.S. since World War II. Topics include the creation of the federal agencies, physics and astronomy, chemistry, earth science, life science, the environment, and social science. (BB)

  20. Patterns of research utilization on patient care units

    Directory of Open Access Journals (Sweden)

    Lander Janice

    2008-06-01

    Full Text Available Abstract Background Organizational context plays a central role in shaping the use of research by healthcare professionals. The largest group of professionals employed in healthcare organizations is nurses, putting them in a position to influence patient and system outcomes significantly. However, investigators have often limited their study on the determinants of research use to individual factors over organizational or contextual factors. Methods The purpose of this study was to examine the determinants of research use among nurses working in acute care hospitals, with an emphasis on identifying contextual determinants of research use. A comparative ethnographic case study design was used to examine seven patient care units (two adult and five pediatric units in four hospitals in two Canadian provinces (Ontario and Alberta. Data were collected over a six-month period by means of quantitative and qualitative approaches using an array of instruments and extensive fieldwork. The patient care unit was the unit of analysis. Drawing on the quantitative data and using correspondence analysis, relationships between various factors were mapped using the coefficient of variation. Results Units with the highest mean research utilization scores clustered together on factors such as nurse critical thinking dispositions, unit culture (as measured by work creativity, work efficiency, questioning behavior, co-worker support, and the importance nurses place on access to continuing education, environmental complexity (as measured by changing patient acuity and re-sequencing of work, and nurses' attitudes towards research. Units with moderate research utilization clustered on organizational support, belief suspension, and intent to use research. Higher nursing workloads and lack of people support clustered more closely to units with the lowest research utilization scores. Conclusion Modifiable characteristics of organizational context at the patient care unit

  1. Research and Innovation Processes revisited

    DEFF Research Database (Denmark)

    Timmermans, Job; Yaghmaei, Emad; Carsten Stahl, Bernd

    2017-01-01

    Purpose: The purpose of this paper is to explore how relationships between different actors are being shaped to allow industry to come to acceptable and desirable uses of research and innovation (R&I) that address societal challenges. Design/methodology/approach: Building on existing notions...... of responsibility proposed in the literature, the paper develops a theoretical account of “networks of responsibility” which capture the interlinked nature of responsibility relationships. The usefulness of the approach is evaluated by exploring two cases of R&I in industry deploying a qualitative research approach...... supports translating RRI principles into everyday organisational practices. Social implications: RRI sets an ambitious agenda to ensure a more social and ethical R&I. Much work is still needed to bridge the gap between these theoretical and political aspirations and daily R&I practice, especially in non...

  2. Proton Testing of Advanced Stellar Compass Digital Processing Unit

    DEFF Research Database (Denmark)

    Thuesen, Gøsta; Denver, Troelz; Jørgensen, Finn E

    1999-01-01

    The Advanced Stellar Compass Digital Processing Unit was radiation tested with 300 MeV protons at Proton Irradiation Facility (PIF), Paul Scherrer Institute, Switzerland.......The Advanced Stellar Compass Digital Processing Unit was radiation tested with 300 MeV protons at Proton Irradiation Facility (PIF), Paul Scherrer Institute, Switzerland....

  3. 15 CFR 971.209 - Processing outside the United States.

    Science.gov (United States)

    2010-01-01

    ... 15 Commerce and Foreign Trade 3 2010-01-01 2010-01-01 false Processing outside the United States... THE ENVIRONMENTAL DATA SERVICE DEEP SEABED MINING REGULATIONS FOR COMMERCIAL RECOVERY PERMITS Applications Contents § 971.209 Processing outside the United States. (a) Except as provided in this section...

  4. Tracer research in process engineering

    International Nuclear Information System (INIS)

    Iller, E.

    1992-01-01

    The book is a review of modern applications of tracer techniques in chemical and process engineering studies. The next topics have been extensively presented: 1) media flow through apparatus; 2) the tracers in the study of media flow dynamics through apparatus; 3) mathematical interpretation of experimental data from impulse-response method; 4) the models of media flow through chemical reactors and apparatus; 5) radiotracers in mass transport study; 6) examples of practical applications of tracer methods in industrial objects. 84 refs, 96 figs, 31 tabs

  5. Assessment of Process Capability: the case of Soft Drinks Processing Unit

    Science.gov (United States)

    Sri Yogi, Kottala

    2018-03-01

    The process capability studies have significant impact in investigating process variation which is important in achieving product quality characteristics. Its indices are to measure the inherent variability of a process and thus to improve the process performance radically. The main objective of this paper is to understand capability of the process being produced within specification of the soft drinks processing unit, a premier brands being marketed in India. A few selected critical parameters in soft drinks processing: concentration of gas volume, concentration of brix, torque of crock has been considered for this study. Assessed some relevant statistical parameters: short term capability, long term capability as a process capability indices perspective. For assessment we have used real time data of soft drinks bottling company which is located in state of Chhattisgarh, India. As our research output suggested reasons for variations in the process which is validated using ANOVA and also predicted Taguchi cost function, assessed also predicted waste monetarily this shall be used by organization for improving process parameters. This research work has substantially benefitted the organization in understanding the various variations of selected critical parameters for achieving zero rejection.

  6. MASSIVELY PARALLEL LATENT SEMANTIC ANALYSES USING A GRAPHICS PROCESSING UNIT

    Energy Technology Data Exchange (ETDEWEB)

    Cavanagh, J.; Cui, S.

    2009-01-01

    Latent Semantic Analysis (LSA) aims to reduce the dimensions of large term-document datasets using Singular Value Decomposition. However, with the ever-expanding size of datasets, current implementations are not fast enough to quickly and easily compute the results on a standard PC. A graphics processing unit (GPU) can solve some highly parallel problems much faster than a traditional sequential processor or central processing unit (CPU). Thus, a deployable system using a GPU to speed up large-scale LSA processes would be a much more effective choice (in terms of cost/performance ratio) than using a PC cluster. Due to the GPU’s application-specifi c architecture, harnessing the GPU’s computational prowess for LSA is a great challenge. We presented a parallel LSA implementation on the GPU, using NVIDIA® Compute Unifi ed Device Architecture and Compute Unifi ed Basic Linear Algebra Subprograms software. The performance of this implementation is compared to traditional LSA implementation on a CPU using an optimized Basic Linear Algebra Subprograms library. After implementation, we discovered that the GPU version of the algorithm was twice as fast for large matrices (1 000x1 000 and above) that had dimensions not divisible by 16. For large matrices that did have dimensions divisible by 16, the GPU algorithm ran fi ve to six times faster than the CPU version. The large variation is due to architectural benefi ts of the GPU for matrices divisible by 16. It should be noted that the overall speeds for the CPU version did not vary from relative normal when the matrix dimensions were divisible by 16. Further research is needed in order to produce a fully implementable version of LSA. With that in mind, the research we presented shows that the GPU is a viable option for increasing the speed of LSA, in terms of cost/performance ratio.

  7. Bubble Chamber Research Group Microcomputer Unit

    International Nuclear Information System (INIS)

    Bairstow, R.; Barlow, J.; Mace, P.R.; Seller, P.; Waters, M.; Watson, J.G.

    1982-05-01

    A distributed data acquisition system has been developed by the Bubble Chamber Research Group at the Rutherford Appleton laboratory for use with their film measuring machines. The system is based upon a set of microcomputers linked together with a VAX 11/780 computer, in a local area computer network. This network is of the star type and uses a packet switching technique. Each film measuring machine is equipped with a microcomputer which controls the function of the table, buffers data and enhances the interface between operators and machines. This paper provides a detailed description of each microcomputer and can be used as a reference manual for these computers. (author)

  8. Graphics processing units in bioinformatics, computational biology and systems biology.

    Science.gov (United States)

    Nobile, Marco S; Cazzaniga, Paolo; Tangherloni, Andrea; Besozzi, Daniela

    2017-09-01

    Several studies in Bioinformatics, Computational Biology and Systems Biology rely on the definition of physico-chemical or mathematical models of biological systems at different scales and levels of complexity, ranging from the interaction of atoms in single molecules up to genome-wide interaction networks. Traditional computational methods and software tools developed in these research fields share a common trait: they can be computationally demanding on Central Processing Units (CPUs), therefore limiting their applicability in many circumstances. To overcome this issue, general-purpose Graphics Processing Units (GPUs) are gaining an increasing attention by the scientific community, as they can considerably reduce the running time required by standard CPU-based software, and allow more intensive investigations of biological systems. In this review, we present a collection of GPU tools recently developed to perform computational analyses in life science disciplines, emphasizing the advantages and the drawbacks in the use of these parallel architectures. The complete list of GPU-powered tools here reviewed is available at http://bit.ly/gputools. © The Author 2016. Published by Oxford University Press.

  9. Beowulf Distributed Processing and the United States Geological Survey

    Science.gov (United States)

    Maddox, Brian G.

    2002-01-01

    Introduction In recent years, the United States Geological Survey's (USGS) National Mapping Discipline (NMD) has expanded its scientific and research activities. Work is being conducted in areas such as emergency response research, scientific visualization, urban prediction, and other simulation activities. Custom-produced digital data have become essential for these types of activities. High-resolution, remotely sensed datasets are also seeing increased use. Unfortunately, the NMD is also finding that it lacks the resources required to perform some of these activities. Many of these projects require large amounts of computer processing resources. Complex urban-prediction simulations, for example, involve large amounts of processor-intensive calculations on large amounts of input data. This project was undertaken to learn and understand the concepts of distributed processing. Experience was needed in developing these types of applications. The idea was that this type of technology could significantly aid the needs of the NMD scientific and research programs. Porting a numerically intensive application currently being used by an NMD science program to run in a distributed fashion would demonstrate the usefulness of this technology. There are several benefits that this type of technology can bring to the USGS's research programs. Projects can be performed that were previously impossible due to a lack of computing resources. Other projects can be performed on a larger scale than previously possible. For example, distributed processing can enable urban dynamics research to perform simulations on larger areas without making huge sacrifices in resolution. The processing can also be done in a more reasonable amount of time than with traditional single-threaded methods (a scaled version of Chester County, Pennsylvania, took about fifty days to finish its first calibration phase with a single-threaded program). This paper has several goals regarding distributed processing

  10. Radiation processing in the United States

    International Nuclear Information System (INIS)

    Brynjolfsson, A.

    1986-01-01

    In animal feeding studies, including the huge animal feeding studies on radiation sterilized poultry products irradiated with sterilizing dose of 58 kGy revealed no harmful effects. This finding is corroborated by the very extensive analysis of the radiolytic products, which indicated that the radiolytic products could not in the quantity found in the food be expected to produce any toxic effect. It thus appears to be proven with reasonable certainty that no harm will result from the proposed use of the process. Accordingly, FDA is moving forward with approvals while allowing the required time for hearings and objection. On July 5, 1983 FDA permitted gamma irradiation for control of microbial contamination in dried spices and dehydrated vegetable seasoning at doses up to 10 kGy; on June 19, 1984 the approval was expanded to cover insect infection; and additional seasonings and irradiation of dry or dehydrated enzyme preparations were approved on February 12 and June 4, respectively, 1985. In addition, in July 1985, FDA cleared irradiation of pork products with doses of 0.3 to 1 kGy for eliminating trichinosis. Approvals of other agencies, including Food and Drug Administration, Department of Agriculture, the Nuclear Regulatory Commission, Occupational Safety and Health Administration, Department of Transportation, Environmental Protection Agency, and States and local communities, are usually of a technological nature and can then be obtained if the process is technologically feasible. (Namekawa, K.)

  11. Process-Product Research: A Cornerstone in Educational Effectiveness Research

    Science.gov (United States)

    Creemers, Bert; Kyriakides, Leonidas

    2015-01-01

    This article links the contribution of process-product studies in developing the theoretical framework of educational effectiveness by pointing out the importance of teacher behavior in the classroom. The role that Jere Brophy played in this evolving research is described within the various phases of teacher effectiveness research. Process-product…

  12. [The nursing process at a burns unit: an ethnographic study].

    Science.gov (United States)

    Rossi, L A; Casagrande, L D

    2001-01-01

    This ethnographic study aimed at understanding the cultural meaning that nursing professionals working at a Burns Unit attribute to the nursing process as well as at identifying the factors affecting the implementation of this methodology. Data were collected through participant observation and semi-structured interviews. The findings indicate that, to the nurses from the investigated unit, the nursing process seems to be identified as bureaucratic management. Some factors determining this perception are: the way in which the nursing process has been taught and interpreted, routine as a guideline for nursing activity, and knowledge and power in the life-world of the Burns Unit.

  13. Graphics Processing Unit Enhanced Parallel Document Flocking Clustering

    Energy Technology Data Exchange (ETDEWEB)

    Cui, Xiaohui [ORNL; Potok, Thomas E [ORNL; ST Charles, Jesse Lee [ORNL

    2010-01-01

    Analyzing and clustering documents is a complex problem. One explored method of solving this problem borrows from nature, imitating the flocking behavior of birds. One limitation of this method of document clustering is its complexity O(n2). As the number of documents grows, it becomes increasingly difficult to generate results in a reasonable amount of time. In the last few years, the graphics processing unit (GPU) has received attention for its ability to solve highly-parallel and semi-parallel problems much faster than the traditional sequential processor. In this paper, we have conducted research to exploit this archi- tecture and apply its strengths to the flocking based document clustering problem. Using the CUDA platform from NVIDIA, we developed a doc- ument flocking implementation to be run on the NVIDIA GEFORCE GPU. Performance gains ranged from thirty-six to nearly sixty times improvement of the GPU over the CPU implementation.

  14. Archaeomagnetic research in the United States midcontinent

    Science.gov (United States)

    Lengyel, Stacey Nicole

    This dissertation combines archaeomagnetic and independent chronometric data from 240 archaeological features to develop a regional secular variation curve for the U.S. midcontinent. These data were obtained from features located between 31.5--40.5° N latitude and 82.5--93.5° W longitude that have been dated to between 60 and 10,700 cal BP. The archaeomagnetic samples were collected from 41 sites within this region over the past 35 years under the direction of four different researchers: Robert DuBois (University of Oklahoma), Daniel Wolfman (University of Arkansas and New Mexico State Museum), Wulf Gose (University of Texas at Austin), and myself. In this project, the data are initially smoothed through the moving windows method to form the first approximation of the curve. Outlier analyses and pairwise statistical comparisons are utilized to refine the smoothed curve, and the results are compared to other Holocene-aged secular variation records from North America. These analyses indicate that the final curve should be treated as three distinct segments with different precision and use recommendations. First, the 850--75 cal BP segment can be used to date archaeomagnetic sample from the project area with expected temporal precision of 100--200 years. Second, the 2528--850 cal BP segment can be used cautiously to date archaeomagnetic samples with an expected temporal precision of 200--300 years. Third, the 9755--4650 cal BP segment should be used for contextual dating purposes only, in that an undated sample can be put into a regional context through comparison with the segment's constituent samples. Finally, three archaeological problems are addressed through the archaeomagnetic data. First, archaeomagnetic data are used to resolve the temporal conflict between an eastern Tennessee structure's morphology and a much earlier radiocarbon date obtained for the structure. Then, archaeomagnetic data are used to address a number of internal chronology questions

  15. Business Process Compliance through Reusable Units of Compliant Processes

    NARCIS (Netherlands)

    D. Shumm; O. Turetken; N. Kokash (Natallia); A. Elgammal; F. Leymann; J. van den Heuvel

    2010-01-01

    htmlabstractCompliance management is essential for ensuring that organizational business processes and supporting information systems are in accordance with a set of prescribed requirements originating from laws, regulations, and various legislative or technical documents such as Sarbanes-Oxley Act

  16. Study of automatic boat loading unit and horizontal sintering process of uranium dioxide pellet

    International Nuclear Information System (INIS)

    He Zhongjing; Chen Yu; Yao Dengfeng; Wang Youliang; Shu Binhua; Wu Genjiu

    2014-01-01

    Sintering process is a key process for the manufacture of nuclear fuel UO_2 pellet. In our factory, the continuous high temperature sintering furnace is used for sintering process. During the sintering of green pellets, the furnace, the boat and the accumulation way can influence the quality of the final product. In this text, on the basis of early process research, The automatic loading boat Unit and horizontal sintering process is studied successively. The results show that the physical and chemical properties of the products manufactured by automatic loading boat unit and horizontal sintering process can meet the technique requirements completely, and this system is reliable and continuous. (authors)

  17. Teacher Research as Continuous Process Improvement

    Science.gov (United States)

    Ellis, Charles; Castle, Kathryn

    2010-01-01

    Purpose: Teacher research (inquiry) has been characterized as practice improvement, professional development and action research, among numerous names and descriptions. The purpose of this paper is to support the case that teacher research is also a form of quality improvement known as continuous process improvement (CPI).…

  18. Video Recording and the Research Process

    Science.gov (United States)

    Leung, Constant; Hawkins, Margaret R.

    2011-01-01

    This is a two-part discussion. Part 1 is entitled "English Language Learning in Subject Lessons", and Part 2 is titled "Video as a Research Tool/Counterpoint". Working with different research concerns, the authors attempt to draw attention to a set of methodological and theoretical issues that have emerged in the research process using video data.…

  19. "Emancipatory Disability Research": Project or Process?

    Science.gov (United States)

    Barnes, Colin

    2002-01-01

    This article provides an overview of the core principles and implications of emancipatory disability research. It suggests the emancipatory research paradigm has begun to transform the material and social relations of research production and concludes by suggesting that emancipatory disability should be perceived as a process rather than a…

  20. Testing a model of componential processing of multi-symbol numbers-evidence from measurement units.

    Science.gov (United States)

    Huber, Stefan; Bahnmueller, Julia; Klein, Elise; Moeller, Korbinian

    2015-10-01

    Research on numerical cognition has addressed the processing of nonsymbolic quantities and symbolic digits extensively. However, magnitude processing of measurement units is still a neglected topic in numerical cognition research. Hence, we investigated the processing of measurement units to evaluate whether typical effects of multi-digit number processing such as the compatibility effect, the string length congruity effect, and the distance effect are also present for measurement units. In three experiments, participants had to single out the larger one of two physical quantities (e.g., lengths). In Experiment 1, the compatibility of number and measurement unit (compatible: 3 mm_6 cm with 3 mm) as well as string length congruity (congruent: 1 m_2 km with m 2 characters) were manipulated. We observed reliable compatibility effects with prolonged reaction times (RT) for incompatible trials. Moreover, a string length congruity effect was present in RT with longer RT for incongruent trials. Experiments 2 and 3 served as control experiments showing that compatibility effects persist when controlling for holistic distance and that a distance effect for measurement units exists. Our findings indicate that numbers and measurement units are processed in a componential manner and thus highlight that processing characteristics of multi-digit numbers generalize to measurement units. Thereby, our data lend further support to the recently proposed generalized model of componential multi-symbol number processing.

  1. Highlight: Research Chair unites four West African universities in ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    2016-04-14

    Apr 14, 2016 ... Local and regional experts including researchers, consultants, and academics convened in Cotonou, Benin, on February 26, 2015 to launch a Research Chair on EcoHealth. The Chair unites four West African universities that have pledged to reduce air pollution and non-communicable respiratory ...

  2. Future Directions for Urban Forestry Research in the United States

    Science.gov (United States)

    John F. Dwyer; David J. Nowak; Gary W. Watson

    2002-01-01

    Urban forestry research promises to continue to be an integral part of the growth and development of forestry in urban and urbanizing areas of the United States. The future is expected to bring increased emphasis on research in support of the care of trees and other plants, ecological restoration, and comprehensive and adaptive management across the landscape....

  3. Infusing Active Learning into the Research Methods Unit

    Science.gov (United States)

    Bluestone, Cheryl

    2007-01-01

    The research methods unit of survey psychology classes introduces important concepts of scientific reasoning and fluency, making it an ideal course in which to deliver enhanced curricula. To increase interest and engagement, the author developed an expanded research methods and statistics module to give students the opportunity to explore…

  4. The process of implementation of emergency care units in Brazil.

    Science.gov (United States)

    O'Dwyer, Gisele; Konder, Mariana Teixeira; Reciputti, Luciano Pereira; Lopes, Mônica Guimarães Macau; Agostinho, Danielle Fernandes; Alves, Gabriel Farias

    2017-12-11

    To analyze the process of implementation of emergency care units in Brazil. We have carried out a documentary analysis, with interviews with twenty-four state urgency coordinators and a panel of experts. We have analyzed issues related to policy background and trajectory, players involved in the implementation, expansion process, advances, limits, and implementation difficulties, and state coordination capacity. We have used the theoretical framework of the analysis of the strategic conduct of the Giddens theory of structuration. Emergency care units have been implemented after 2007, initially in the Southeast region, and 446 emergency care units were present in all Brazilian regions in 2016. Currently, 620 emergency care units are under construction, which indicates expectation of expansion. Federal funding was a strong driver for the implementation. The states have planned their emergency care units, but the existence of direct negotiation between municipalities and the Union has contributed with the significant number of emergency care units that have been built but that do not work. In relation to the urgency network, there is tension with the hospital because of the lack of beds in the country, which generates hospitalizations in the emergency care unit. The management of emergency care units is predominantly municipal, and most of the emergency care units are located outside the capitals and classified as Size III. The main challenges identified were: under-funding and difficulty in recruiting physicians. The emergency care unit has the merit of having technological resources and being architecturally differentiated, but it will only succeed within an urgency network. Federal induction has generated contradictory responses, since not all states consider the emergency care unit a priority. The strengthening of the state management has been identified as a challenge for the implementation of the urgency network.

  5. The process of implementation of emergency care units in Brazil

    Directory of Open Access Journals (Sweden)

    Gisele O'Dwyer

    2017-12-01

    Full Text Available ABSTRACT OBJECTIVE To analyze the process of implementation of emergency care units in Brazil. METHODS We have carried out a documentary analysis, with interviews with twenty-four state urgency coordinators and a panel of experts. We have analyzed issues related to policy background and trajectory, players involved in the implementation, expansion process, advances, limits, and implementation difficulties, and state coordination capacity. We have used the theoretical framework of the analysis of the strategic conduct of the Giddens theory of structuration. RESULTS Emergency care units have been implemented after 2007, initially in the Southeast region, and 446 emergency care units were present in all Brazilian regions in 2016. Currently, 620 emergency care units are under construction, which indicates expectation of expansion. Federal funding was a strong driver for the implementation. The states have planned their emergency care units, but the existence of direct negotiation between municipalities and the Union has contributed with the significant number of emergency care units that have been built but that do not work. In relation to the urgency network, there is tension with the hospital because of the lack of beds in the country, which generates hospitalizations in the emergency care unit. The management of emergency care units is predominantly municipal, and most of the emergency care units are located outside the capitals and classified as Size III. The main challenges identified were: under-funding and difficulty in recruiting physicians. CONCLUSIONS The emergency care unit has the merit of having technological resources and being architecturally differentiated, but it will only succeed within an urgency network. Federal induction has generated contradictory responses, since not all states consider the emergency care unit a priority. The strengthening of the state management has been identified as a challenge for the implementation of the

  6. 15 CFR 971.427 - Processing outside the United States.

    Science.gov (United States)

    2010-01-01

    ... 15 Commerce and Foreign Trade 3 2010-01-01 2010-01-01 false Processing outside the United States... THE ENVIRONMENTAL DATA SERVICE DEEP SEABED MINING REGULATIONS FOR COMMERCIAL RECOVERY PERMITS Issuance/Transfer: Terms, Conditions and Restrictions Terms, Conditions and Restrictions § 971.427 Processing...

  7. The Microcomputer in the Clinical Nursing Research Unit

    Science.gov (United States)

    Schwirian, Patricia M.; Byers, Sandra R.

    1982-01-01

    This paper discusses the microcomputer in clinical nursing research. There are six general areas in which computers have been useful to nurses: nursing notes and charting; patient care plans; automated monitoring of high-tech nursing units; HIS and MIS systems; personnel distribution systems; and education. Three alternative models for the conduct of clinical nursing research in a hospital are described. The first is a centralized model relying on the bureaucratic structure of the hospital. Second is a decentralized network of professional nurses and research support personnel woven together by a Clinical Nurse Researcher, and third is a dedicated clinical nursing research unit. Microcomputers have five characteristics which make them vital tools for nurse researchers: user-friendliness; environment friendliness; low cost; ease of interface with other information systems; and range and quality of software.

  8. Materials Process Design Branch. Work Unit Directive (WUD) 54

    National Research Council Canada - National Science Library

    LeClair, Steve

    2002-01-01

    The objectives of the Manufacturing Research WUD 54 are to 1) conduct in-house research to develop advanced materials process design/control technologies to enable more repeatable and affordable manufacturing capabilities and 2...

  9. Formalizing the Process of Constructing Chains of Lexical Units

    Directory of Open Access Journals (Sweden)

    Grigorij Chetverikov

    2015-06-01

    Full Text Available Formalizing the Process of Constructing Chains of Lexical Units The paper investigates mathematical aspects of describing the construction of chains of lexical units on the basis of finite-predicate algebra. Analyzing the construction peculiarities is carried out and application of the method of finding the power of linear logical transformation for removing characteristic words of a dictionary entry is given. Analysis and perspectives of the results of the study are provided.

  10. GREEN BUSINESS PROCESS MANAGEMENT: A RESEARCH AGENDA

    Directory of Open Access Journals (Sweden)

    Aditya Ghose

    2010-01-01

    Full Text Available There is a global consensus on the need to reduce our collective carbon footprint. While much research attention has focused on developing alternative energy sources, automotive technologies or waste disposal techniques, we often ignore the fact that the ability to optimize (existing operations to reduce their emissions impact is fundamental to this exercise. Business process management (BPM technology, with its focus on understanding, modelling and improving/optimizing business processes, is a key starting point. Process modelling technology has applications beyond what we would traditionally describe as business processes - we can also model and improve manufacturing and other "physical" processes. This paper describes the contours of the emerging research landscape in green business process management and presents some early results in this area.

  11. CALCULATION PECULIARITIES OF RE-PROCESSED ROAD COVERING UNIT COST

    Directory of Open Access Journals (Sweden)

    Dilyara Kyazymovna Izmaylova

    2017-09-01

    Full Text Available In the article there are considered questions of economic expediency of non-waste technology application for road covering repair and restoration. Determined the conditions of asphalt-concrete processing at plants. Carried out cost changing analysis of asphalt granulate considering the conditions of transportation and preproduction processing. Given an example of expense calculation of one conventional unit of asphalt-concrete mixture volume preparation with and without processing.

  12. Summary of process research analysis efforts

    Science.gov (United States)

    Burger, D. R.

    1985-01-01

    A summary of solar-cell process research analysis efforts was presented. Process design and cell design are interactive efforts where technology from integrated circuit processes and other processes are blended. The primary factors that control cell efficiency are: (1) the bulk parameters of the available sheet material, (2) the retention and enhancement of these bulk parameters, and (3) the cell design and the cost to produce versus the finished cells performance. The process sequences need to be tailored to be compatible with the sheet form, the cell shape form, and the processing equipment. New process options that require further evaluation and utilization are lasers, robotics, thermal pulse techniques, and new materials. There are numerous process control techniques that can be adapted and used that will improve product uniformity and reduced costs. Two factors that can lead to longer life modules are the use of solar cell diffusion barriers and improved encapsulation.

  13. Tomography system having an ultrahigh-speed processing unit

    International Nuclear Information System (INIS)

    Brunnett, C.J.; Gerth, V.W. Jr.

    1977-01-01

    A transverse section tomography system has an ultrahigh-speed data processing unit for performing back projection and updating. An x-ray scanner directs x-ray beams through a planar section of a subject from a sequence of orientations and positions. The data processing unit includes a scan storage section for retrievably storing a set of filtered scan signals in scan storage locations corresponding to predetermined beam orientations. An array storage section is provided for storing image signals as they are generated

  14. Iterative Methods for MPC on Graphical Processing Units

    DEFF Research Database (Denmark)

    Gade-Nielsen, Nicolai Fog; Jørgensen, John Bagterp; Dammann, Bernd

    2012-01-01

    The high oating point performance and memory bandwidth of Graphical Processing Units (GPUs) makes them ideal for a large number of computations which often arises in scientic computing, such as matrix operations. GPUs achieve this performance by utilizing massive par- allelism, which requires ree...... as to avoid the use of dense matrices, which may be too large for the limited memory capacity of current graphics cards.......The high oating point performance and memory bandwidth of Graphical Processing Units (GPUs) makes them ideal for a large number of computations which often arises in scientic computing, such as matrix operations. GPUs achieve this performance by utilizing massive par- allelism, which requires...

  15. Reflector antenna analysis using physical optics on Graphics Processing Units

    DEFF Research Database (Denmark)

    Borries, Oscar Peter; Sørensen, Hans Henrik Brandenborg; Dammann, Bernd

    2014-01-01

    The Physical Optics approximation is a widely used asymptotic method for calculating the scattering from electrically large bodies. It requires significant computational work and little memory, and is thus well suited for application on a Graphics Processing Unit. Here, we investigate the perform......The Physical Optics approximation is a widely used asymptotic method for calculating the scattering from electrically large bodies. It requires significant computational work and little memory, and is thus well suited for application on a Graphics Processing Unit. Here, we investigate...

  16. The materials processing research base of the Materials Processing Center

    Science.gov (United States)

    Latanision, R. M.

    1986-01-01

    An annual report of the research activities of the Materials Processing Center of the Massachusetts Institute of Technology is given. Research on dielectrophoresis in the microgravity environment, phase separation kinetics in immiscible liquids, transport properties of droplet clusters in gravity-free fields, probes and monitors for the study of solidification of molten semiconductors, fluid mechanics and mass transfer in melt crystal growth, and heat flow control and segregation in directional solidification are discussed.

  17. Accelerating cardiac bidomain simulations using graphics processing units.

    Science.gov (United States)

    Neic, A; Liebmann, M; Hoetzl, E; Mitchell, L; Vigmond, E J; Haase, G; Plank, G

    2012-08-01

    Anatomically realistic and biophysically detailed multiscale computer models of the heart are playing an increasingly important role in advancing our understanding of integrated cardiac function in health and disease. Such detailed simulations, however, are computationally vastly demanding, which is a limiting factor for a wider adoption of in-silico modeling. While current trends in high-performance computing (HPC) hardware promise to alleviate this problem, exploiting the potential of such architectures remains challenging since strongly scalable algorithms are necessitated to reduce execution times. Alternatively, acceleration technologies such as graphics processing units (GPUs) are being considered. While the potential of GPUs has been demonstrated in various applications, benefits in the context of bidomain simulations where large sparse linear systems have to be solved in parallel with advanced numerical techniques are less clear. In this study, the feasibility of multi-GPU bidomain simulations is demonstrated by running strong scalability benchmarks using a state-of-the-art model of rabbit ventricles. The model is spatially discretized using the finite element methods (FEM) on fully unstructured grids. The GPU code is directly derived from a large pre-existing code, the Cardiac Arrhythmia Research Package (CARP), with very minor perturbation of the code base. Overall, bidomain simulations were sped up by a factor of 11.8 to 16.3 in benchmarks running on 6-20 GPUs compared to the same number of CPU cores. To match the fastest GPU simulation which engaged 20 GPUs, 476 CPU cores were required on a national supercomputing facility.

  18. Economics of conservation systems research in the Southeastern United States

    Science.gov (United States)

    The use of conservation systems in crop production is not a new concept in the southeastern United States. In 1978, researchers from across the Southeast met in Griffin, Georgia for the first annual Southern Conservation Agricultural Systems Conference. Four of the ten presentations specifically men...

  19. High-throughput sequence alignment using Graphics Processing Units

    Directory of Open Access Journals (Sweden)

    Trapnell Cole

    2007-12-01

    Full Text Available Abstract Background The recent availability of new, less expensive high-throughput DNA sequencing technologies has yielded a dramatic increase in the volume of sequence data that must be analyzed. These data are being generated for several purposes, including genotyping, genome resequencing, metagenomics, and de novo genome assembly projects. Sequence alignment programs such as MUMmer have proven essential for analysis of these data, but researchers will need ever faster, high-throughput alignment tools running on inexpensive hardware to keep up with new sequence technologies. Results This paper describes MUMmerGPU, an open-source high-throughput parallel pairwise local sequence alignment program that runs on commodity Graphics Processing Units (GPUs in common workstations. MUMmerGPU uses the new Compute Unified Device Architecture (CUDA from nVidia to align multiple query sequences against a single reference sequence stored as a suffix tree. By processing the queries in parallel on the highly parallel graphics card, MUMmerGPU achieves more than a 10-fold speedup over a serial CPU version of the sequence alignment kernel, and outperforms the exact alignment component of MUMmer on a high end CPU by 3.5-fold in total application time when aligning reads from recent sequencing projects using Solexa/Illumina, 454, and Sanger sequencing technologies. Conclusion MUMmerGPU is a low cost, ultra-fast sequence alignment program designed to handle the increasing volume of data produced by new, high-throughput sequencing technologies. MUMmerGPU demonstrates that even memory-intensive applications can run significantly faster on the relatively low-cost GPU than on the CPU.

  20. The United States nuclear regulatory commission license renewal process

    International Nuclear Information System (INIS)

    Holian, B.E.

    2009-01-01

    The United States (U.S.) Nuclear Regulatory Commission (NRC) license renewal process establishes the technical and administrative requirements for the renewal of operating power plant licenses. Reactor ope-rating licenses were originally issued for 40 years and are allowed to be renewed. The review process for license renewal applications (L.R.A.) provides continued assurance that the level of safety provided by an applicant's current licensing basis is maintained for the period of extended operation. The license renewal review focuses on passive, long-lived structures and components of the plant that are subject to the effects of aging. The applicant must demonstrate that programs are in place to manage those aging effects. The review also verifies that analyses based on the current operating term have been evaluated and shown to be valid for the period of extended operation. The NRC has renewed the licenses for 52 reactors at 30 plant sites. Each applicant requested, and was granted, an extension of 20 years. Applications to renew the licenses of 20 additional reactors at 13 plant sites are under review. As license renewal is voluntary, the decision to seek license renewal and the timing of the application is made by the licensee. However, the NRC expects that, over time, essentially all U.S. operating reactors will request license renewal. In 2009, the U.S. has 4 plants that enter their 41. year of ope-ration. The U.S. Nuclear Industry has expressed interest in 'life beyond 60', that is, requesting approval of a second renewal period. U.S. regulations allow for subsequent license renewals. The NRC is working with the U.S. Department of Energy (DOE) on research related to light water reactor sustainability. (author)

  1. Research in adaptive management: working relations and the research process.

    Science.gov (United States)

    Amanda C. Graham; Linda E. Kruger

    2002-01-01

    This report analyzes how a small group of Forest Service scientists participating in efforts to implement adaptive management approach working relations, and how they understand and apply the research process. Nine scientists completed a questionnaire to assess their preferred mode of thinking (the Herrmann Brain Dominance Instrument), engaged in a facilitated...

  2. ISS and Shuttle Payload Research Development and Processing

    Science.gov (United States)

    Calhoun, Kyle A.

    2010-01-01

    NASA's ISS and Spacecraft Processing Directorate (UB) is charged with the performance of payload development for research originating through NASA, ISS international partners, and the National Laboratory. The Payload Development sector of the Directorate takes biological research approved for on orbit experimentation from its infancy stage and finds a way to integrate and implement that research into a payload on either a Shuttle sortie or Space Station increment. From solicitation and selection, to definition, to verification, to integration and finally to operations and analysis, Payload Development is there every step of the way. My specific work as an intern this summer has consisted of investigating data received by separate flight and ground control Advanced Biological Research Systems (ABRS) units for Advanced Plant Experiments (APEX) and Cambium research. By correlation and analysis of this data and specific logbook information I have been working to explain changes in environmental conditions on both the flight and ground control unit. I have then, compiled all of that information into a form that can be presentable to the Principal Investigator (PI). This compilation allows that PI scientist to support their findings and add merit to their research. It also allows us, as the Payload Developers, to further inspect the ABRS unit and its performance

  3. Research and photovoltaic industry at the United States

    International Nuclear Information System (INIS)

    Lerouge, Ch.; Herino, R.; Delville, R.; Allegre, R.

    2006-06-01

    For a big country as the United States, the solar energy can be a solution for the air quality improvement, the greenhouse gases fight and the reduction of the dependence to the imported petroleum and also for the economic growth by the increase of the employment in the solar industry sector. This document takes stock on the photovoltaic in the United States in the industrial and research domains. The american photovoltaic industry is the third behind the Japan and the Germany. (A.L.B.)

  4. The Future of Nearshore Processes Research

    Science.gov (United States)

    Elko, N.; Feddersen, F.; Foster, D. L.; Holman, R. A.; McNinch, J.; Ozkan-Haller, H. T.; Plant, N. G.; Raubenheimer, B.; Elgar, S.; Hay, A. E.; Holland, K. T.; Kirby, J. T., Jr.; Lippmann, T. C.; Miller, J. K.; Stockdon, H. F.; Ashton, A. D.; Boehm, A. B.; Clark, D.; Cowen, E.; Dalyander, S.; Gelfenbaum, G. R.; Hapke, C. J.; MacMahan, J.; McNamara, D.; Mulligan, R. P.; Palmsten, M. L.; Ruggiero, P.; Sherwood, C. R.; Hsu, T. J.

    2014-12-01

    Over 70 members of the nearshore coastal processes research community convened in April 2014 to discuss a vision for the future of nearshore science while celebrating the memories and contributions of our recently departed colleague, Abby Sallenger. The participants reviewed community accomplishments over the past four decades. Federal agencies, including FEMA, NOAA, NPS, USGS, USACE, and NRL discussed the most pressing societal needs within the coastal zone. The group engaged in a retrospective of the last four decades of progress, assessed the current status and limitations of nearshore processes research, and developed a vision for the future that focuses on societally relevant problems. The top research topics identified included: Long-term Coastal Impacts: Meaningfully improve our understanding and prediction of the long-term coastal effects of sea level rise and changes in storminess patterns and associated efforts to protect coastal infrastructure. Extreme Events: Coastal flooding, overland flow, and concurrent morphological evolution during extreme events including the subsequent process of coastal recovery. Human and Ecosystem Health: Linkages between physical coastal processes (transport and mixing) and land-based pollution (pathogens, nutrients, toxic contaminants). Critical for addressing these research questions is enabling infrastructure, such as new observational tools and data sets, models, and nearshore-community communication and collaboration. Idea and concepts developed during the meeting (to be published in Shore and Beach) will be presented to foster collaboration and advocacy amongst the wider nearshore community. Meeting materials are available at: https://scripps.ucsd.edu/centers/nearshorefuture/.

  5. Processes of international collaboration in management research

    DEFF Research Database (Denmark)

    Jonsen, Karsten; Butler, Christina; Mäkelä, Kristiina

    2013-01-01

    Scientists and academics increasingly work on collaborative projects and write papers in international research teams. This trend is driven by greater publishing demands in terms of the quality and breadth of data and analysis methods, which tend to be difficult to achieve without collaborating...... across institutional and national boundaries. Yet, our understanding of the collaborative processes in an academic setting and the potential tensions associated with them remains limited. We use a reflexive, autoethnographic approach to explicitly investigate our own experiences of international...... collaborative research. We offer systematic insights into the social and intellectual processes of academic collaborative writing, identifying six lessons and two key tensions that influence the success of international research teams. Our findings may benefit the formation of future coauthor teams...

  6. Science Policy Research Unit annual report 1984/1985

    Energy Technology Data Exchange (ETDEWEB)

    1984-01-01

    The report covers the principal research programmes of the Unit, and also describes its graduate and undergraduate teaching, (listing subjects of postgraduate research) and library services. A list of 1984 published papers and staff is presented. The principle research programmes include: the setting up of the Designated Research Centre on Science, Technology and Energy Policy in British Economic Development; policy for technology and industrial innovation in industrialised countries; energy economics, technology and policy (with a sub-section on coal); European science and industrial policy; science policy and research evaluation; technical change and employment opportunities in the UK economy; new technology, manpower and skills; technology and social change; science and technology policy in developing countries; military technology and arms limitation. Short-term projects and consultancy are also covered.

  7. Feed process studies: Research-Scale Melter

    Energy Technology Data Exchange (ETDEWEB)

    Whittington, K.F.; Seiler, D.K.; Luey, J.; Vienna, J.D.; Sliger, W.A.

    1996-09-01

    In support of a two-phase approach to privatizing the processing of hazardous and radioactive waste at Hanford, research-scale melter (RSM) experiments were conducted to determine feed processing characteristics of two potential privatization Phase 1 high-level waste glass formulations and to determine if increased Ag, Te, and noble metal amounts would have bad effects. Effects of feed compositions and process conditions were examined for processing rate, cold cap behavior, off-gas, and glass properties. The 2 glass formulations used were: NOM-2 with adjusted waste loading (all components except silica and soda) of 25 wt%, and NOM-3 (max waste loaded glass) with adjusted waste loading of 30 wt%. The 25 wt% figure is the minimum required in the privatization Request for Proposal. RSM operated for 19 days (5 runs). 1010 kg feed was processed, producing 362 kg glass. Parts of runs 2 and 3 were run at 10 to 30 degrees above the nominal temperature 1150 C, with the most significant processing rate increase in run 3. Processing observations led to the choice of NOM-3 for noble metal testing in runs 4 and 5. During noble metal testing, processing rates fell 50% from baseline. Destructive analysis showed that a layer of noble metals and noble metal oxides settled on the floor of the melter, leading to current ``channeling`` which allowed the top section to cool, reducing production rates.

  8. Feed process studies: Research-Scale Melter

    International Nuclear Information System (INIS)

    Whittington, K.F.; Seiler, D.K.; Luey, J.; Vienna, J.D.; Sliger, W.A.

    1996-09-01

    In support of a two-phase approach to privatizing the processing of hazardous and radioactive waste at Hanford, research-scale melter (RSM) experiments were conducted to determine feed processing characteristics of two potential privatization Phase 1 high-level waste glass formulations and to determine if increased Ag, Te, and noble metal amounts would have bad effects. Effects of feed compositions and process conditions were examined for processing rate, cold cap behavior, off-gas, and glass properties. The 2 glass formulations used were: NOM-2 with adjusted waste loading (all components except silica and soda) of 25 wt%, and NOM-3 (max waste loaded glass) with adjusted waste loading of 30 wt%. The 25 wt% figure is the minimum required in the privatization Request for Proposal. RSM operated for 19 days (5 runs). 1010 kg feed was processed, producing 362 kg glass. Parts of runs 2 and 3 were run at 10 to 30 degrees above the nominal temperature 1150 C, with the most significant processing rate increase in run 3. Processing observations led to the choice of NOM-3 for noble metal testing in runs 4 and 5. During noble metal testing, processing rates fell 50% from baseline. Destructive analysis showed that a layer of noble metals and noble metal oxides settled on the floor of the melter, leading to current ''channeling'' which allowed the top section to cool, reducing production rates

  9. [General practice research units in Denmark: multidisciplinary research in support of practical work].

    Science.gov (United States)

    Reventlow, Susanne; Broholm, Katalin Alexa Király; Mäkelä, Marjukka

    2014-01-01

    In Denmark the general practice research units operating in connection with universities provide a home base, training and methodology support for researchers in the field from medical students to general practitioners carrying out practical work. Research issues frequently require a multidisciplinary approach and use of different kinds of materials. Problems arising from the practical work of general practitioners take priority in the wide selection of topics. The units have networked efficiently with organizations of general practitioners and medical education. The combination of research environments has created synergy benefiting everybody and increased the scientific productivity and visibility of the field.

  10. Flocking-based Document Clustering on the Graphics Processing Unit

    Energy Technology Data Exchange (ETDEWEB)

    Cui, Xiaohui [ORNL; Potok, Thomas E [ORNL; Patton, Robert M [ORNL; ST Charles, Jesse Lee [ORNL

    2008-01-01

    Abstract?Analyzing and grouping documents by content is a complex problem. One explored method of solving this problem borrows from nature, imitating the flocking behavior of birds. Each bird represents a single document and flies toward other documents that are similar to it. One limitation of this method of document clustering is its complexity O(n2). As the number of documents grows, it becomes increasingly difficult to receive results in a reasonable amount of time. However, flocking behavior, along with most naturally inspired algorithms such as ant colony optimization and particle swarm optimization, are highly parallel and have found increased performance on expensive cluster computers. In the last few years, the graphics processing unit (GPU) has received attention for its ability to solve highly-parallel and semi-parallel problems much faster than the traditional sequential processor. Some applications see a huge increase in performance on this new platform. The cost of these high-performance devices is also marginal when compared with the price of cluster machines. In this paper, we have conducted research to exploit this architecture and apply its strengths to the document flocking problem. Our results highlight the potential benefit the GPU brings to all naturally inspired algorithms. Using the CUDA platform from NIVIDA? we developed a document flocking implementation to be run on the NIVIDA?GEFORCE 8800. Additionally, we developed a similar but sequential implementation of the same algorithm to be run on a desktop CPU. We tested the performance of each on groups of news articles ranging in size from 200 to 3000 documents. The results of these tests were very significant. Performance gains ranged from three to nearly five times improvement of the GPU over the CPU implementation. This dramatic improvement in runtime makes the GPU a potentially revolutionary platform for document clustering algorithms.

  11. Scale up risk of developing oil shale processing units

    International Nuclear Information System (INIS)

    Oepik, I.

    1991-01-01

    The experiences in oil shale processing in three large countries, China, the U.S.A. and the U.S.S.R. have demonstrated, that the relative scale up risk of developing oil shale processing units is related to the scale up factor. On the background of large programmes for developing the oil shale industry branch, i.e. the $30 billion investments in colorado and Utah or 50 million t/year oil shale processing in Estonia and Leningrad Region planned in the late seventies, the absolute scope of the scale up risk of developing single retorting plants, seems to be justified. But under the conditions of low crude oil prices, when the large-scale development of oil shale processing industry is stopped, the absolute scope of the scale up risk is to be divided between a small number of units. Therefore, it is reasonable to build the new commercial oil shale processing plants with a minimum scale up risk. For example, in Estonia a new oil shale processing plant with gas combustion retorts projected to start in the early nineties will be equipped with four units of 1500 t/day enriched oil shale throughput each, designed with scale up factor M=1.5 and with a minimum scale up risk, only r=2.5-4.5%. The oil shale retorting unit for the PAMA plant in Israel [1] is planned to develop in three steps, also with minimum scale up risk: feasibility studies in Colorado with Israel's shale at Paraho 250 t/day retort and other tests, demonstration retort of 700 t/day and M=2.8 in Israel, and commercial retorts in the early nineties with the capacity of about 1000 t/day with M=1.4. The scale up risk of the PAMA project r=2-4% is approximately the same as that in Estonia. the knowledge of the scope of the scale up risk of developing oil shale processing retorts assists on the calculation of production costs in erecting new units. (author). 9 refs., 2 tabs

  12. Remote Maintenance Design Guide for Compact Processing Units

    Energy Technology Data Exchange (ETDEWEB)

    Draper, J.V.

    2000-07-13

    Oak Ridge National Laboratory (ORNL) Robotics and Process Systems (RPSD) personnel have extensive experience working with remotely operated and maintained systems. These systems require expert knowledge in teleoperation, human factors, telerobotics, and other robotic devices so that remote equipment may be manipulated, operated, serviced, surveyed, and moved about in a hazardous environment. The RPSD staff has a wealth of experience in this area, including knowledge in the broad topics of human factors, modular electronics, modular mechanical systems, hardware design, and specialized tooling. Examples of projects that illustrate and highlight RPSD's unique experience in remote systems design and application include the following: (1) design of a remote shear and remote dissolver systems in support of U.S. Department of Energy (DOE) fuel recycling research and nuclear power missions; (2) building remotely operated mobile systems for metrology and characterizing hazardous facilities in support of remote operations within those facilities; (3) construction of modular robotic arms, including the Laboratory Telerobotic Manipulator, which was designed for the National Aeronautics and Space Administration (NASA) and the Advanced ServoManipulator, which was designed for the DOE; (4) design of remotely operated laboratories, including chemical analysis and biochemical processing laboratories; (5) construction of remote systems for environmental clean up and characterization, including underwater, buried waste, underground storage tank (UST) and decontamination and dismantlement (D&D) applications. Remote maintenance has played a significant role in fuel reprocessing because of combined chemical and radiological contamination. Furthermore, remote maintenance is expected to play a strong role in future waste remediation. The compact processing units (CPUs) being designed for use in underground waste storage tank remediation are examples of improvements in systems

  13. Ising Processing Units: Potential and Challenges for Discrete Optimization

    Energy Technology Data Exchange (ETDEWEB)

    Coffrin, Carleton James [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Nagarajan, Harsha [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Bent, Russell Whitford [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-07-05

    The recent emergence of novel computational devices, such as adiabatic quantum computers, CMOS annealers, and optical parametric oscillators, presents new opportunities for hybrid-optimization algorithms that leverage these kinds of specialized hardware. In this work, we propose the idea of an Ising processing unit as a computational abstraction for these emerging tools. Challenges involved in using and bench- marking these devices are presented, and open-source software tools are proposed to address some of these challenges. The proposed benchmarking tools and methodology are demonstrated by conducting a baseline study of established solution methods to a D-Wave 2X adiabatic quantum computer, one example of a commercially available Ising processing unit.

  14. Tomography system having an ultrahigh speed processing unit

    International Nuclear Information System (INIS)

    Cox, J.P. Jr.; Gerth, V.W. Jr.

    1977-01-01

    A transverse section tomography system has an ultrahigh-speed data processing unit for performing back projection and updating. An x-ray scanner directs x-ray beams through a planar section of a subject from a sequence of orientations and positions. The scanner includes a movably supported radiation detector for detecting the intensity of the beams of radiation after they pass through the subject

  15. A Block-Asynchronous Relaxation Method for Graphics Processing Units

    OpenAIRE

    Anzt, H.; Dongarra, J.; Heuveline, Vincent; Tomov, S.

    2011-01-01

    In this paper, we analyze the potential of asynchronous relaxation methods on Graphics Processing Units (GPUs). For this purpose, we developed a set of asynchronous iteration algorithms in CUDA and compared them with a parallel implementation of synchronous relaxation methods on CPU-based systems. For a set of test matrices taken from the University of Florida Matrix Collection we monitor the convergence behavior, the average iteration time and the total time-to-solution time. Analyzing the r...

  16. Accelerating Malware Detection via a Graphics Processing Unit

    Science.gov (United States)

    2010-09-01

    Processing Unit . . . . . . . . . . . . . . . . . . 4 PE Portable Executable . . . . . . . . . . . . . . . . . . . . . 4 COFF Common Object File Format...operating systems for the future [Szo05]. The PE format is an updated version of the common object file format ( COFF ) [Mic06]. Microsoft released a new...NAs02]. These alerts can be costly in terms of time and resources for individuals and organizations to investigate each misidentified file [YWL07] [Vak10

  17. Accelerating Molecular Dynamic Simulation on Graphics Processing Units

    Science.gov (United States)

    Friedrichs, Mark S.; Eastman, Peter; Vaidyanathan, Vishal; Houston, Mike; Legrand, Scott; Beberg, Adam L.; Ensign, Daniel L.; Bruns, Christopher M.; Pande, Vijay S.

    2009-01-01

    We describe a complete implementation of all-atom protein molecular dynamics running entirely on a graphics processing unit (GPU), including all standard force field terms, integration, constraints, and implicit solvent. We discuss the design of our algorithms and important optimizations needed to fully take advantage of a GPU. We evaluate its performance, and show that it can be more than 700 times faster than a conventional implementation running on a single CPU core. PMID:19191337

  18. Understanding Combustion Processes Through Microgravity Research

    Science.gov (United States)

    Ronney, Paul D.

    1998-01-01

    A review of research on the effects of gravity on combustion processes is presented, with an emphasis on a discussion of the ways in which reduced-gravity experiments and modeling has led to new understanding. Comparison of time scales shows that the removal of buoyancy-induced convection leads to manifestations of other transport mechanisms, notably radiative heat transfer and diffusional processes such as Lewis number effects. Examples from premixed-gas combustion, non-premixed gas-jet flames, droplet combustion, flame spread over solid and liquid fuels, and other fields are presented. Promising directions for new research are outlined, the most important of which is suggested to be radiative reabsorption effects in weakly burning flames.

  19. Optimization Solutions for Improving the Performance of the Parallel Reduction Algorithm Using Graphics Processing Units

    Directory of Open Access Journals (Sweden)

    Ion LUNGU

    2012-01-01

    Full Text Available In this paper, we research, analyze and develop optimization solutions for the parallel reduction function using graphics processing units (GPUs that implement the Compute Unified Device Architecture (CUDA, a modern and novel approach for improving the software performance of data processing applications and algorithms. Many of these applications and algorithms make use of the reduction function in their computational steps. After having designed the function and its algorithmic steps in CUDA, we have progressively developed and implemented optimization solutions for the reduction function. In order to confirm, test and evaluate the solutions' efficiency, we have developed a custom tailored benchmark suite. We have analyzed the obtained experimental results regarding: the comparison of the execution time and bandwidth when using graphic processing units covering the main CUDA architectures (Tesla GT200, Fermi GF100, Kepler GK104 and a central processing unit; the data type influence; the binary operator's influence.

  20. Miniaturized Power Processing Unit Study: A Cubesat Electric Propulsion Technology Enabler Project

    Science.gov (United States)

    Ghassemieh, Shakib M.

    2014-01-01

    This study evaluates High Voltage Power Processing Unit (PPU) technology and driving requirements necessary to enable the Microfluidic Electric Propulsion technology research and development by NASA and university partners. This study provides an overview of the state of the art PPU technology with recommendations for technology demonstration projects and missions for NASA to pursue.

  1. Evaluating Translational Research: A Process Marker Model

    Science.gov (United States)

    Trochim, William; Kane, Cathleen; Graham, Mark J.; Pincus, Harold A.

    2011-01-01

    Abstract Objective: We examine the concept of translational research from the perspective of evaluators charged with assessing translational efforts. One of the major tasks for evaluators involved in translational research is to help assess efforts that aim to reduce the time it takes to move research to practice and health impacts. Another is to assess efforts that are intended to increase the rate and volume of translation. Methods: We offer an alternative to the dominant contemporary tendency to define translational research in terms of a series of discrete “phases.”Results: We contend that this phased approach has been confusing and that it is insufficient as a basis for evaluation. Instead, we argue for the identification of key operational and measurable markers along a generalized process pathway from research to practice. Conclusions: This model provides a foundation for the evaluation of interventions designed to improve translational research and the integration of these findings into a field of translational studies. Clin Trans Sci 2011; Volume 4: 153–162 PMID:21707944

  2. Graphics processing unit based computation for NDE applications

    Science.gov (United States)

    Nahas, C. A.; Rajagopal, Prabhu; Balasubramaniam, Krishnan; Krishnamurthy, C. V.

    2012-05-01

    Advances in parallel processing in recent years are helping to improve the cost of numerical simulation. Breakthroughs in Graphical Processing Unit (GPU) based computation now offer the prospect of further drastic improvements. The introduction of 'compute unified device architecture' (CUDA) by NVIDIA (the global technology company based in Santa Clara, California, USA) has made programming GPUs for general purpose computing accessible to the average programmer. Here we use CUDA to develop parallel finite difference schemes as applicable to two problems of interest to NDE community, namely heat diffusion and elastic wave propagation. The implementations are for two-dimensions. Performance improvement of the GPU implementation against serial CPU implementation is then discussed.

  3. Characteristics of the consumer preferences research process

    Directory of Open Access Journals (Sweden)

    Mirela-Cristina Voicu

    2013-05-01

    Full Text Available Information is one of the most important resources that a company must possess. Some information is hidden deep in the black box - the mind of the consumer, as in the case of information about consumer preferences. Although it seems a concept difficult to grasp, it was shown that consumer preferences can be effectively measured and their research may provide a deeper understanding of the choices that consumers make when deciding to select an offer against another and when deciding to continue in time the relationship with one supplier. The following paper reveals some important aspects regarding the use of information regarding consumer preferences, the fundamentals behind consumer preferences research and the milestones in the consumer preferences research process.

  4. CHARACTERISTICS OF THE CONSUMER PREFERENCES RESEARCH PROCESS

    Directory of Open Access Journals (Sweden)

    MIRELA-CRISTINA VOICU

    2013-05-01

    Full Text Available Information is one of the most important resources that a company must possess. Some information is hidden deep in the black box - the mind of the consumer, as in the case of information about consumer preferences. Although it seems a concept difficult to grasp, it was shown that consumer preferences can be effectively measured and their research may provide a deeper understanding of the choices that consumers make when deciding to select an offer against another and when deciding to continue in time the relationship with one supplier. The following paper reveals some important aspects regarding the use of information regarding consumer preferences, the fundamentals behind consumer preferences research and the milestones in the consumer preferences research process.

  5. The aging of biomedical research in the United States.

    Directory of Open Access Journals (Sweden)

    Kirstin R W Matthews

    Full Text Available In the past 30 years, the average age of biomedical researchers has steadily increased. The average age of an investigator at the National Institutes of Health (NIH rose from 39 to 51 between 1980 and 2008. The aging of the biomedical workforce was even more apparent when looking at first-time NIH grantees. The average age of a new investigator was 42 in 2008, compared to 36 in 1980. To determine if the rising barriers at NIH for entry in biomedical research might impact innovative ideas and research, we analyzed the research and publications of Nobel Prize winners from 1980 to 2010 to assess the age at which their pioneering research occurred. We established that in the 30-year period, 96 scientists won the Nobel Prize in medicine or chemistry for work related to biomedicine, and that their groundbreaking research was conducted at an average age of 41-one year younger than the average age of a new investigator at NIH. Furthermore, 78% of the Nobel Prize winners conducted their research before the age of 51, the average age of an NIH principal investigator. This suggested that limited access to NIH might inhibit research potential and novel projects, and could impact biomedicine and the next generation scientists in the United States.

  6. Optimized Laplacian image sharpening algorithm based on graphic processing unit

    Science.gov (United States)

    Ma, Tinghuai; Li, Lu; Ji, Sai; Wang, Xin; Tian, Yuan; Al-Dhelaan, Abdullah; Al-Rodhaan, Mznah

    2014-12-01

    In classical Laplacian image sharpening, all pixels are processed one by one, which leads to large amount of computation. Traditional Laplacian sharpening processed on CPU is considerably time-consuming especially for those large pictures. In this paper, we propose a parallel implementation of Laplacian sharpening based on Compute Unified Device Architecture (CUDA), which is a computing platform of Graphic Processing Units (GPU), and analyze the impact of picture size on performance and the relationship between the processing time of between data transfer time and parallel computing time. Further, according to different features of different memory, an improved scheme of our method is developed, which exploits shared memory in GPU instead of global memory and further increases the efficiency. Experimental results prove that two novel algorithms outperform traditional consequentially method based on OpenCV in the aspect of computing speed.

  7. The future of nearshore processes research

    Science.gov (United States)

    Elko, Nicole A.; Feddersen, Falk; Foster, Diane; Hapke, Cheryl J.; McNinch, Jesse E.; Mulligan, Ryan P.; Tuba Ӧzkan-Haller, H.; Plant, Nathaniel G.; Raubenheimer, Britt

    2014-01-01

    The nearshore is the transition region between land and the continental shelf including (from onshore to offshore) coastal plains, wetlands, estuaries, coastal cliffs, dunes, beaches, surf zones (regions of wave breaking), and the inner shelf (Figure ES-1). Nearshore regions are vital to the national economy, security, commerce, and recreation. The nearshore is dynamically evolving, is often densely populated, and is under increasing threat from sea level rise, long-term erosion, extreme storms, and anthropogenic influences. Worldwide, almost one billion people live at elevations within 10 m of present sea level. Long-term erosion threatens communities, infrastructure, ecosystems, and habitat. Extreme storms can cause billions of dollars of damage. Degraded water quality impacts ecosystem and human health. Nearshore processes, the complex interactions between water, sediment, biota, and humans, must be understood and predicted to manage this often highly developed yet vulnerable nearshore environment. Over the past three decades, the understanding of nearshore processes has improved. However, societal needs are growing with increased coastal urbanization and threats of future climate change, and significant scientific challenges remain. To address these challenges, members of academia, industry, and federal agencies (USGS, USACE, NPS, NOAA, FEMA, ONR) met at the “The Past and Future of Nearshore Processes Research: Reflections on the Sallenger Years and a New Vision for the Future” workshop to develop a nearshore processes research vision where societal needs and science challenges intersect. The resulting vision is comprised of three broad research themes: Long-term coastal evolution due to natural and anthropogenic processes: As global climate change alters the rates of sea level rise and potentially storm patterns and coastal urbanization increases over the coming decades, an understanding of coastal evolution is critical. Improved knowledge of long

  8. RESEARCH ON THE INTERNATIONAL ACCOUNTING HARMONIZATION PROCESS

    Directory of Open Access Journals (Sweden)

    Tatiana Danescu

    2016-12-01

    Full Text Available During the last decades, the need of harmonization of the financial reporting frameworks has become more acute, mostly because the capital markets are not restricted anymore by country borders and capital movement has outlined the phenomenon of globalization and internationalism. A significant step in harmonizing the financial reporting was done in the process of normalization through different sets of rules and principles, recognized and applied in many states are the International Financial Reporting Standards (IFRS. The process of international recognition of these standards continues along with conceptual development which is based on epistemological research on specific markets, industries, economies open to international capital flows. In this context it becomes of interest to identify and understand generally accepted and applied accounting elements which carry forward the accounting harmonization process along with factors and circumstances that create diversity in nationally applied financial reporting frameworks.

  9. Closing Symposium of the DFG Research Unit FOR 1066

    CERN Document Server

    Niehuis, Reinhard; Kroll, Norbert; Behrends, Kathrin

    2016-01-01

    The book reports on advanced solutions to the problem of simulating wing and nacelle stall, as presented and discussed by internationally recognized researchers at the Closing Symposium of the DFG Research Unit FOR 1066. Reliable simulations of flow separation on airfoils, wings and powered engine nacelles at high Reynolds numbers represent great challenges in defining suitable mathematical models, computing numerically accurate solutions and providing comprehensive experimental data for the validation of numerical simulations. Additional problems arise from the need to consider airframe-engine interactions and inhomogeneous onset flow conditions, as real aircraft operate in atmospheric environments with often-large distortions. The findings of fundamental and applied research into these and other related issues are reported in detail in this book, which targets all readers, academics and professionals alike, interested in the development of advanced computational fluid dynamics modeling for the simulation of...

  10. Controllable unit concept as applied to a hypothetical tritium process

    International Nuclear Information System (INIS)

    Seabaugh, P.W.; Sellers, D.E.; Woltermann, H.A.; Boh, D.R.; Miles, J.C.; Fushimi, F.C.

    1976-01-01

    A methodology (controllable unit accountability) is described that identifies controlling errors for corrective action, locates areas and time frames of suspected diversions, defines time and sensitivity limits of diversion flags, defines the time frame in which pass-through quantities of accountable material and by inference SNM remain controllable and provides a basis for identification of incremental cost associated with purely safeguards considerations. The concept provides a rationale from which measurement variability and specific safeguard criteria can be converted into a numerical value that represents the degree of control or improvement attainable with a specific measurement system or combination of systems. Currently the methodology is being applied to a high-throughput, mixed-oxide fuel fabrication process. The process described is merely used to illustrate a procedure that can be applied to other more pertinent processes

  11. United States Crystalline Repository Project - key research areas

    International Nuclear Information System (INIS)

    Patera, E.S.

    1986-01-01

    The Crystalline Repository Project is responsible for siting the second high-level nuclear waste repository in crystalline rock for the US Department of Energy. A methodology is being developed to define data and information needs and a way to evaluate that information. The areas of research the Crystalline Repository Project is involved in include fluid flow in a fractured network, coupled thermal, chemical and flow processes and cooperation in other nations and OECD research programs

  12. The United States of America and scientific research.

    Directory of Open Access Journals (Sweden)

    Gregory J Hather

    2010-08-01

    Full Text Available To gauge the current commitment to scientific research in the United States of America (US, we compared federal research funding (FRF with the US gross domestic product (GDP and industry research spending during the past six decades. In order to address the recent globalization of scientific research, we also focused on four key indicators of research activities: research and development (R&D funding, total science and engineering doctoral degrees, patents, and scientific publications. We compared these indicators across three major population and economic regions: the US, the European Union (EU and the People's Republic of China (China over the past decade. We discovered a number of interesting trends with direct relevance for science policy. The level of US FRF has varied between 0.2% and 0.6% of the GDP during the last six decades. Since the 1960s, the US FRF contribution has fallen from twice that of industrial research funding to roughly equal. Also, in the last two decades, the portion of the US government R&D spending devoted to research has increased. Although well below the US and the EU in overall funding, the current growth rate for R&D funding in China greatly exceeds that of both. Finally, the EU currently produces more science and engineering doctoral graduates and scientific publications than the US in absolute terms, but not per capita. This study's aim is to facilitate a serious discussion of key questions by the research community and federal policy makers. In particular, our results raise two questions with respect to: a the increasing globalization of science: "What role is the US playing now, and what role will it play in the future of international science?"; and b the ability to produce beneficial innovations for society: "How will the US continue to foster its strengths?"

  13. The United States of America and scientific research.

    Science.gov (United States)

    Hather, Gregory J; Haynes, Winston; Higdon, Roger; Kolker, Natali; Stewart, Elizabeth A; Arzberger, Peter; Chain, Patrick; Field, Dawn; Franza, B Robert; Lin, Biaoyang; Meyer, Folker; Ozdemir, Vural; Smith, Charles V; van Belle, Gerald; Wooley, John; Kolker, Eugene

    2010-08-16

    To gauge the current commitment to scientific research in the United States of America (US), we compared federal research funding (FRF) with the US gross domestic product (GDP) and industry research spending during the past six decades. In order to address the recent globalization of scientific research, we also focused on four key indicators of research activities: research and development (R&D) funding, total science and engineering doctoral degrees, patents, and scientific publications. We compared these indicators across three major population and economic regions: the US, the European Union (EU) and the People's Republic of China (China) over the past decade. We discovered a number of interesting trends with direct relevance for science policy. The level of US FRF has varied between 0.2% and 0.6% of the GDP during the last six decades. Since the 1960s, the US FRF contribution has fallen from twice that of industrial research funding to roughly equal. Also, in the last two decades, the portion of the US government R&D spending devoted to research has increased. Although well below the US and the EU in overall funding, the current growth rate for R&D funding in China greatly exceeds that of both. Finally, the EU currently produces more science and engineering doctoral graduates and scientific publications than the US in absolute terms, but not per capita. This study's aim is to facilitate a serious discussion of key questions by the research community and federal policy makers. In particular, our results raise two questions with respect to: a) the increasing globalization of science: "What role is the US playing now, and what role will it play in the future of international science?"; and b) the ability to produce beneficial innovations for society: "How will the US continue to foster its strengths?"

  14. Job satisfaction and importance for intensive care unit research coordinators: results from binational survey.

    Science.gov (United States)

    Rickard, Claire M; Roberts, Brigit L; Foote, Jonathon; McGrail, Matthew R

    2007-09-01

    To measure Intensive Care Unit Research coordinator job satisfaction and importance and to identify priorities for role development. Research coordinator numbers are growing internationally in response to increasing clinical research activity. In Australia, 1% of registered nurses work principally in research, many as Research coordinators. Internationally, the Association of Clinical Research Professionals currently has 6536 certified Research coordinators in 13 countries, with likely additional large numbers practicing without the voluntary certification. Research coordinators are almost always nurses, but little is know about this emerging specialty. Design. Cross-sectional study using anonymous self-report questionnaire. After ethics approval, the McCloskey-Mueller Satisfaction Scale and McCloskey-Mueller Importance Scale were administered via the Internet. The sample was 49 (response rate 71%) Research coordinators from the Australia and New Zealand Intensive Care Unit Research coordinators' Interest Group. Research coordinators were satisfied with structural aspects of the position working business hours; flexibility of working hours; high levels of responsibility and control over their work. Dissatisfaction was expressed regarding: remuneration and recognition; compensation for weekend work; salary package; career advancement opportunities; and childcare facilities. High priorities for role development are those rated highly important but with much lower satisfaction. These are: compensation for weekend call-out work; salary and remuneration package; recognition by management and clinicians; career advancement opportunities; departmental research processes; encouragement and feedback; and number of working hours. Increasing numbers of nurses have been attracted to this clinically based research position. These data contribute to the understanding and development of the role.

  15. Exploring the SCOAP3 Research Contributions of the United States

    Science.gov (United States)

    Marsteller, Matthew

    2016-03-01

    The Sponsoring Consortium for Open Access Publishing in Particle Physics (SCOAP3) is a successful global partnership of libraries, funding agencies and research centers. This presentation will inform the audience about SCOAP3 and also delve into descriptive statistics of the United States' intellectual contribution to particle physics via these open access journals. Exploration of the SCOAP3 particle physics literature using a variety of metrics tools such as Web of Science™, InCites™, Scopus® and SciVal will be shared. ORA or Sci2 will be used to visualize author collaboration networks.

  16. Use of general purpose graphics processing units with MODFLOW

    Science.gov (United States)

    Hughes, Joseph D.; White, Jeremy T.

    2013-01-01

    To evaluate the use of general-purpose graphics processing units (GPGPUs) to improve the performance of MODFLOW, an unstructured preconditioned conjugate gradient (UPCG) solver has been developed. The UPCG solver uses a compressed sparse row storage scheme and includes Jacobi, zero fill-in incomplete, and modified-incomplete lower-upper (LU) factorization, and generalized least-squares polynomial preconditioners. The UPCG solver also includes options for sequential and parallel solution on the central processing unit (CPU) using OpenMP. For simulations utilizing the GPGPU, all basic linear algebra operations are performed on the GPGPU; memory copies between the central processing unit CPU and GPCPU occur prior to the first iteration of the UPCG solver and after satisfying head and flow criteria or exceeding a maximum number of iterations. The efficiency of the UPCG solver for GPGPU and CPU solutions is benchmarked using simulations of a synthetic, heterogeneous unconfined aquifer with tens of thousands to millions of active grid cells. Testing indicates GPGPU speedups on the order of 2 to 8, relative to the standard MODFLOW preconditioned conjugate gradient (PCG) solver, can be achieved when (1) memory copies between the CPU and GPGPU are optimized, (2) the percentage of time performing memory copies between the CPU and GPGPU is small relative to the calculation time, (3) high-performance GPGPU cards are utilized, and (4) CPU-GPGPU combinations are used to execute sequential operations that are difficult to parallelize. Furthermore, UPCG solver testing indicates GPGPU speedups exceed parallel CPU speedups achieved using OpenMP on multicore CPUs for preconditioners that can be easily parallelized.

  17. Fast analytical scatter estimation using graphics processing units.

    Science.gov (United States)

    Ingleby, Harry; Lippuner, Jonas; Rickey, Daniel W; Li, Yue; Elbakri, Idris

    2015-01-01

    To develop a fast patient-specific analytical estimator of first-order Compton and Rayleigh scatter in cone-beam computed tomography, implemented using graphics processing units. The authors developed an analytical estimator for first-order Compton and Rayleigh scatter in a cone-beam computed tomography geometry. The estimator was coded using NVIDIA's CUDA environment for execution on an NVIDIA graphics processing unit. Performance of the analytical estimator was validated by comparison with high-count Monte Carlo simulations for two different numerical phantoms. Monoenergetic analytical simulations were compared with monoenergetic and polyenergetic Monte Carlo simulations. Analytical and Monte Carlo scatter estimates were compared both qualitatively, from visual inspection of images and profiles, and quantitatively, using a scaled root-mean-square difference metric. Reconstruction of simulated cone-beam projection data of an anthropomorphic breast phantom illustrated the potential of this method as a component of a scatter correction algorithm. The monoenergetic analytical and Monte Carlo scatter estimates showed very good agreement. The monoenergetic analytical estimates showed good agreement for Compton single scatter and reasonable agreement for Rayleigh single scatter when compared with polyenergetic Monte Carlo estimates. For a voxelized phantom with dimensions 128 × 128 × 128 voxels and a detector with 256 × 256 pixels, the analytical estimator required 669 seconds for a single projection, using a single NVIDIA 9800 GX2 video card. Accounting for first order scatter in cone-beam image reconstruction improves the contrast to noise ratio of the reconstructed images. The analytical scatter estimator, implemented using graphics processing units, provides rapid and accurate estimates of single scatter and with further acceleration and a method to account for multiple scatter may be useful for practical scatter correction schemes.

  18. Graphics Processing Unit Accelerated Hirsch-Fye Quantum Monte Carlo

    Science.gov (United States)

    Moore, Conrad; Abu Asal, Sameer; Rajagoplan, Kaushik; Poliakoff, David; Caprino, Joseph; Tomko, Karen; Thakur, Bhupender; Yang, Shuxiang; Moreno, Juana; Jarrell, Mark

    2012-02-01

    In Dynamical Mean Field Theory and its cluster extensions, such as the Dynamic Cluster Algorithm, the bottleneck of the algorithm is solving the self-consistency equations with an impurity solver. Hirsch-Fye Quantum Monte Carlo is one of the most commonly used impurity and cluster solvers. This work implements optimizations of the algorithm, such as enabling large data re-use, suitable for the Graphics Processing Unit (GPU) architecture. The GPU's sheer number of concurrent parallel computations and large bandwidth to many shared memories takes advantage of the inherent parallelism in the Green function update and measurement routines, and can substantially improve the efficiency of the Hirsch-Fye impurity solver.

  19. Heterogeneous Multicore Parallel Programming for Graphics Processing Units

    Directory of Open Access Journals (Sweden)

    Francois Bodin

    2009-01-01

    Full Text Available Hybrid parallel multicore architectures based on graphics processing units (GPUs can provide tremendous computing power. Current NVIDIA and AMD Graphics Product Group hardware display a peak performance of hundreds of gigaflops. However, exploiting GPUs from existing applications is a difficult task that requires non-portable rewriting of the code. In this paper, we present HMPP, a Heterogeneous Multicore Parallel Programming workbench with compilers, developed by CAPS entreprise, that allows the integration of heterogeneous hardware accelerators in a unintrusive manner while preserving the legacy code.

  20. Congestion estimation technique in the optical network unit registration process.

    Science.gov (United States)

    Kim, Geunyong; Yoo, Hark; Lee, Dongsoo; Kim, Youngsun; Lim, Hyuk

    2016-07-01

    We present a congestion estimation technique (CET) to estimate the optical network unit (ONU) registration success ratio for the ONU registration process in passive optical networks. An optical line terminal (OLT) estimates the number of collided ONUs via the proposed scheme during the serial number state. The OLT can obtain congestion level among ONUs to be registered such that this information may be exploited to change the size of a quiet window to decrease the collision probability. We verified the efficiency of the proposed method through simulation and experimental results.

  1. Computer processing techniques in digital radiography research

    International Nuclear Information System (INIS)

    Pickens, D.R.; Kugel, J.A.; Waddill, W.B.; Smith, G.D.; Martin, V.N.; Price, R.R.; James, A.E. Jr.

    1985-01-01

    In the Department of Radiology and Radiological Sciences, Vanderbilt University Medical Center, and the Center for Medical Imaging Research, Nashville, TN, there are several activities which are designed to increase the information available from film-screen acquisition as well as from direct digital acquisition of radiographic information. Two of the projects involve altering the display of images after acquisition, either to remove artifacts present as a result of the acquisition process or to change the manner in which the image is displayed to improve the perception of details in the image. These two projects use methods which can be applied to any type of digital image, but are being implemented with images digitized from conventional x-ray film. One of these research endeavors involves mathematical alteration of the image to correct for motion artifacts or registration errors between images that will be subtracted. Another applies well-known image processing methods to digital radiographic images to improve the image contrast and enhance subtle details in the image. A third project involves the use of dual energy imaging with a digital radiography system to reconstruct images which demonstrate either soft tissue details or the osseous structures. These projects are discussed in greater detail in the following sections of this communication

  2. Directions of ICF research in the United States

    International Nuclear Information System (INIS)

    Hogan, W.J.; Campbell, E.M.

    1997-01-01

    Inertial confinement fusion (ICF) research in the United States is in a dramatic upswing. Technical progress continues at a rapid pace and with the start of the construction of the National Ignition Facility (NIF) this year the total U.S. budget for ICF for fiscal year 1997 stands at $380 million. The NIF is being built as an essential component of the U.S. Stockpile Stewardship and Management Program which has been formulated to assure the continued safety, reliability, and performance of the downsized nuclear weapons stockpile in the absence of nuclear tests. This paper will discuss some of the directions that the ICF research is now taking. (AIP) copyright 1997 American Institute of Physics

  3. United States Domestic Research Reactor Infrastructure - TRIGA Reactor Fuel Support

    International Nuclear Information System (INIS)

    Morrell, Douglas

    2008-01-01

    The purpose of the United State Domestic Research Reactor Infrastructure Program is to provide fresh nuclear reactor fuel to United States universities at no, or low, cost to the university. The title of the fuel remains with the United States government and when universities are finished with the fuel, the fuel is returned to the United States government. The program is funded by the United States Department of Energy - Nuclear Energy division, managed by Department of Energy - Idaho Field Office, and contracted to the Idaho National Laboratory's Management and Operations Contractor - Battelle Energy Alliance. Program has been at Idaho since 1977 and INL subcontracts with 26 United States domestic reactor facilities (13 TRIGA facilities, 9 plate fuel facilities, 2 AGN facilities, 1 Pulstar fuel facility, 1 Critical facility). University has not shipped fuel since 1968 and as such, we have no present procedures for shipping spent fuel. In addition: floor loading rate is unknown, many interferences must be removed to allow direct access to the reactor tank, floor space in the reactor cell is very limited, pavement ends inside our fence; some of the surface is not finished. The whole approach is narrow, curving and downhill. A truck large enough to transport the cask cannot pull into the lot and then back out (nearly impossible / refused by drivers); a large capacity (100 ton), long boom crane would have to be used due to loading dock obstructions. Access to the entrance door is on a sidewalk. The campus uses it as a road for construction equipment, deliveries and security response. Large trees are on both sides of sidewalk. Spent fuel shipments have never been done, no procedures approved or in place, no approved casks, no accident or safety analysis for spent fuel loading. Any cask assembly used in this facility will have to be removed from one crane, moved on the floor and then attached to another crane to get from the staging area to the reactor room. Reactor

  4. Coal conversion process by the United Power Plants of Westphalia

    Energy Technology Data Exchange (ETDEWEB)

    1974-08-01

    The coal conversion process used by the United Power Plants of Westphalia and its possible applications are described. In this process, the crushed and predried coal is degassed and partly gasified in a gas generator, during which time the sulfur present in the coal is converted into hydrogen sulfide, which together with the carbon dioxide is subsequently washed out and possibly utilized or marketed. The residual coke together with the ashes and tar is then sent to the melting chamber of the steam generator where the ashes are removed. After desulfurization, the purified gas is fed into an external circuit and/or to a gas turbine for electricity generation. The raw gas from the gas generator can be directly used as fuel in a conventional power plant. The calorific value of the purified gas varies from 3200 to 3500 kcal/cu m. The purified gas can be used as reducing agent, heating gas, as raw material for various chemical processes, or be conveyed via pipelines to remote areas for electricity generation. The conversion process has the advantages of increased economy of electricity generation with desulfurization, of additional gas generation, and, in long-term prospects, of the use of the waste heat from high-temperature nuclear reactors for this process.

  5. Conceptual Design for the Pilot-Scale Plutonium Oxide Processing Unit in the Radiochemical Processing Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Lumetta, Gregg J.; Meier, David E.; Tingey, Joel M.; Casella, Amanda J.; Delegard, Calvin H.; Edwards, Matthew K.; Jones, Susan A.; Rapko, Brian M.

    2014-08-05

    This report describes a conceptual design for a pilot-scale capability to produce plutonium oxide for use as exercise and reference materials, and for use in identifying and validating nuclear forensics signatures associated with plutonium production. This capability is referred to as the Pilot-scale Plutonium oxide Processing Unit (P3U), and it will be located in the Radiochemical Processing Laboratory at the Pacific Northwest National Laboratory. The key unit operations are described, including plutonium dioxide (PuO2) dissolution, purification of the Pu by ion exchange, precipitation, and conversion to oxide by calcination.

  6. Exploiting graphics processing units for computational biology and bioinformatics.

    Science.gov (United States)

    Payne, Joshua L; Sinnott-Armstrong, Nicholas A; Moore, Jason H

    2010-09-01

    Advances in the video gaming industry have led to the production of low-cost, high-performance graphics processing units (GPUs) that possess more memory bandwidth and computational capability than central processing units (CPUs), the standard workhorses of scientific computing. With the recent release of generalpurpose GPUs and NVIDIA's GPU programming language, CUDA, graphics engines are being adopted widely in scientific computing applications, particularly in the fields of computational biology and bioinformatics. The goal of this article is to concisely present an introduction to GPU hardware and programming, aimed at the computational biologist or bioinformaticist. To this end, we discuss the primary differences between GPU and CPU architecture, introduce the basics of the CUDA programming language, and discuss important CUDA programming practices, such as the proper use of coalesced reads, data types, and memory hierarchies. We highlight each of these topics in the context of computing the all-pairs distance between instances in a dataset, a common procedure in numerous disciplines of scientific computing. We conclude with a runtime analysis of the GPU and CPU implementations of the all-pairs distance calculation. We show our final GPU implementation to outperform the CPU implementation by a factor of 1700.

  7. The First Prototype for the FastTracker Processing Unit

    CERN Document Server

    Andreani, A; The ATLAS collaboration; Beretta, M; Bogdan, M; Citterio, M; Alberti, F; Giannetti, P; Lanza, A; Magalotti, D; Piendibene, M; Shochet, M; Stabile, A; Tang, J; Tompkins, L

    2012-01-01

    Modern experiments search for extremely rare processes hidden in much larger background levels. As the experiment complexity and the accelerator backgrounds and luminosity increase we need increasingly complex and exclusive selections. We present the first prototype of a new Processing Unit, the core of the FastTracker processor for Atlas, whose computing power is such that a couple of hundreds of them will be able to reconstruct all the tracks with transverse momentum above 1 GeV in the ATLAS events up to Phase II instantaneous luminosities (5×1034 cm-2 s-1) with an event input rate of 100 kHz and a latency below hundreds of microseconds. We plan extremely powerful, very compact and low consumption units for the far future, essential to increase efficiency and purity of the Level 2 selected samples through the intensive use of tracking. This strategy requires massive computing power to minimize the online execution time of complex tracking algorithms. The time consuming pattern recognition problem, generall...

  8. Molecular image in biomedical research. Molecular imaging unit of the National Cancer Research Center

    International Nuclear Information System (INIS)

    Perez Bruzon, J.; Mulero Anhiorte, F.

    2010-01-01

    This article has two basic objectives. firstly, it will review briefly the most important imaging techniques used in biomedical research indicting the most significant aspects related to their application in the preclinical stage. Secondly, it will present a practical application of these techniques in a pure biomedical research centre (not associated to a clinical facility). Practical aspects such as organisation, equipment, work norms, shielding of the Spanish National Cancer Research Centre (CNIO) Imaging Unit will be shown. This is a pioneering facility in the application of these techniques in research centres without any dependence or any direct relationship with other hospital Nuclear Medicine services. (Author) 7 refs.

  9. Improving Defense Health Program Medical Research Processes

    Science.gov (United States)

    2017-08-08

    research , including a Business Cell; 87 Research Development, 88 Research Oversight, 89 and Research Compliance offices;90 and the Center...needed for DHP medical research , such as the Army’s Clinical and Translational Research Program Office, 38 the Navy’s Research Methods Training Program... research stated, “key infrastructure for a learning health system will encompass three core elements: data networks, methods , and workforce.” 221

  10. Statistical process control in nursing research.

    Science.gov (United States)

    Polit, Denise F; Chaboyer, Wendy

    2012-02-01

    In intervention studies in which randomization to groups is not possible, researchers typically use quasi-experimental designs. Time series designs are strong quasi-experimental designs but are seldom used, perhaps because of technical and analytic hurdles. Statistical process control (SPC) is an alternative analytic approach to testing hypotheses about intervention effects using data collected over time. SPC, like traditional statistical methods, is a tool for understanding variation and involves the construction of control charts that distinguish between normal, random fluctuations (common cause variation), and statistically significant special cause variation that can result from an innovation. The purpose of this article is to provide an overview of SPC and to illustrate its use in a study of a nursing practice improvement intervention. Copyright © 2011 Wiley Periodicals, Inc.

  11. Real-time radar signal processing using GPGPU (general-purpose graphic processing unit)

    Science.gov (United States)

    Kong, Fanxing; Zhang, Yan Rockee; Cai, Jingxiao; Palmer, Robert D.

    2016-05-01

    This study introduces a practical approach to develop real-time signal processing chain for general phased array radar on NVIDIA GPUs(Graphical Processing Units) using CUDA (Compute Unified Device Architecture) libraries such as cuBlas and cuFFT, which are adopted from open source libraries and optimized for the NVIDIA GPUs. The processed results are rigorously verified against those from the CPUs. Performance benchmarked in computation time with various input data cube sizes are compared across GPUs and CPUs. Through the analysis, it will be demonstrated that GPGPUs (General Purpose GPU) real-time processing of the array radar data is possible with relatively low-cost commercial GPUs.

  12. Minimization of entropy production in separate and connected process units

    Energy Technology Data Exchange (ETDEWEB)

    Roesjorde, Audun

    2004-08-01

    The objective of this thesis was to further develop a methodology for minimizing the entropy production of single and connected chemical process units. When chemical process equipment is designed and operated at the lowest entropy production possible, the energy efficiency of the equipment is enhanced. We have found for single process units that the entropy production could be reduced with up to 20-40%, given the degrees of freedom in the optimization. In processes, our results indicated that even bigger reductions were possible. The states of minimum entropy production were studied and important painter's for obtaining significant reductions in the entropy production were identified. Both from sustain ability and economical viewpoints knowledge of energy efficient design and operation are important. In some of the systems we studied, nonequilibrium thermodynamics was used to model the entropy production. In Chapter 2, we gave a brief introduction to different industrial applications of nonequilibrium thermodynamics. The link between local transport phenomena and overall system description makes nonequilibrium thermodynamics a useful tool for understanding design of chemical process units. We developed the methodology of minimization of entropy production in several steps. First, we analyzed and optimized the entropy production of single units: Two alternative concepts of adiabatic distillation; diabatic and heat-integrated distillation, were analyzed and optimized in Chapter 3 to 5. In diabatic distillation, heat exchange is allowed along the column, and it is this feature that increases the energy efficiency of the distillation column. In Chapter 3, we found how a given area of heat transfer should be optimally distributed among the trays in a column separating a mixture of propylene and propane. The results showed that heat exchange was most important on the trays close to the re boiler and condenser. In Chapter 4 and 5, we studied how the entropy

  13. The Action Research Process and Matrix Marketing

    Directory of Open Access Journals (Sweden)

    Claudio Vignali

    2001-01-01

    Full Text Available There has been extensive and long-lasting debate in the UK about the purpose and scope of appropriate management research. Many authors elucidate that it is widely agreed that management research does not operate a single agreed scientific paradigm and can be seen as a soft, applied area of study, showing features of both, ‘engineering’ and ‘craft’ orientations. Nevertheless, the need for management theory to be made more relevant to the work of practice by explaining that it will be necessary to identify new ways of formulating and employing scientific knowledge to practical ends is the basis of this work. However, some authors argue that the process of managerial decision-making, a major aspect of the strategic planning procedure, has become more problematic because modern management, more than ever before, is faced with an immense complexity of tasks and an increasingly volatile business environment. For many years writers have been suggesting that organisations should focus and rely on the fundamental formal models and techniques of strategic planning.

  14. Research in the United States relative to geochemistry and health

    Science.gov (United States)

    Petrie, W.L.; Cannon, H.L.

    1979-01-01

    Increasing concern regarding the effects of the geochemical environment on health in the United States has fostered research studies in a number of universities and government agencies. The necessity to evaluate the effects of natural and man-made elemental excesses in the environment on health requires the establishment of requirements and tolerance limits for the various elements in water and crops. Maps of the geographic distribution of these elements in rocks, surficial materials and ground and surface waters are also essential for comparison with the occurrence of disease. Funding support for research projects that relate to various parameters of these problems emanates largely from a few federal agencies, and much of the work is conducted at government, university and private facilities. An example of the latter is the National Academy of Sciences-National Research Council, which has several components that are addressing a variety of comparative studies of the geochemical environment related to health; studies involve specific trace elements (like selenium and magnesium), diseases (like cancer, urolithiasis and cardiovascular disease), other health factors (like aging and nutrition) and links with timely major problems (like the health effects of greatly increasing the use of coal). ?? 1979.

  15. Use of a tangential filtration unit for processing liquid waste from nuclear laundries

    International Nuclear Information System (INIS)

    Augustin, X.; Buzonniere, A. de; Barnier, H.

    1993-01-01

    Nuclear laundries produce large quantities of weakly contaminated effluents charged with insoluble and soluble products. In collaboration with CEA, TECHNICATOME has developed an ultrafiltration process for liquid waste from nuclear laundries, associated with prior in-solubilization of the radiochemical activity. This process 'seeded ultrafiltration' is based on the use of decloggable mineral filter media and combines very high separation efficiency with long membrane life. The efficiency of the tangential filtration unit which has been processing effluents from the Cadarache Nuclear Research Center (CEA-France) nuclear laundry since mid-1988, has been confirmed on several sites

  16. Rowing upstream: Contextualising indigenous research processes ...

    African Journals Online (AJOL)

    The use of indigenous research ethics has a possibility of contextualising indigenous research. Orthodox research is guided by ethical principles which are meant to protect the institution or researcher and the participants. Despite the existence of the ethical pronouncements, literature has shown that research has proven to ...

  17. Gas-centrifuge unit and centrifugal process for isotope separation

    International Nuclear Information System (INIS)

    Stark, T.M.

    1979-01-01

    An invention involving a process and apparatus for isotope-separation applications such as uranium-isotope enrichment is disclosed which employs cascades of gas centrifuges. A preferred apparatus relates to an isotope-enrichment unit which includes a first group of cascades of gas centrifuges and an auxiliary cascade. Each cascade has an input, a light-fraction output, and a heavy-fraction output for separating a gaseous-mixture feed including a compound of a light nuclear isotope and a compound of a heavy nuclear isotope into light and heavy fractions respectively enriched and depleted in the light isotope. The cascades of the first group have at least one enriching stage and at least one stripping stage. The unit further includes means for introducing a gaseous-mixture feedstock into each input of the first group of cascades, means for withdrawing at least a portion of a product fraction from the light-fraction outputs of the first group of cascades, and means for withdrawing at least a portion of a waste fraction from the heavy-fraction outputs of the first group of cascades. The isotope-enrichment unit also includes a means for conveying a gaseous-mixture from a light-fraction output of a first cascade included in the first group to the input of the auxiliary cascade so that at least a portion of a light gaseous-mixture fraction produced by the first group of cascades is further separated into a light and a heavy fraction by the auxiliary cascade. At least a portion of a product fraction is withdrawn from the light fraction output of the auxiliary cascade. If the light-fraction output of the first cascade and the heavy-fraction output of the auxiliary cascade are reciprocal outputs, the concentraton of the light isotope in the heavy fraction produced by the auxiliary cascade essentially equals the concentration of the light isotope in the gaseous-mixture feedstock

  18. Status of reactor shielding research in the United States

    International Nuclear Information System (INIS)

    Bartine, D.E.

    1983-01-01

    Shielding research in the United States continues to place emphasis on: (1) the development and refinement of shielding design calculational methods and nuclear data; and (2) the performance of confirmation experiments, both to evaluate specific design concepts and to verify specific calculational techniques and input data. The successful prediction of the radiation levels observed within the now-operating Fast Flux Test Facility (FFTF) has demonstrated the validity of this two-pronged approach, which has since been applied to US fast breeder reactor programs and is now being used to determine radiation levels and possible further shielding needs at operating light water reactors, especially under accident conditions. A similar approach is being applied to the back end of the fission fuel cycle to verify that radiation doses at fuel element storage and transportation facilities and within fuel reprocessing plants are kept at acceptable levels without undue economic penalties

  19. Dynamic wavefront creation for processing units using a hybrid compactor

    Energy Technology Data Exchange (ETDEWEB)

    Puthoor, Sooraj; Beckmann, Bradford M.; Yudanov, Dmitri

    2018-02-20

    A method, a non-transitory computer readable medium, and a processor for repacking dynamic wavefronts during program code execution on a processing unit, each dynamic wavefront including multiple threads are presented. If a branch instruction is detected, a determination is made whether all wavefronts following a same control path in the program code have reached a compaction point, which is the branch instruction. If no branch instruction is detected in executing the program code, a determination is made whether all wavefronts following the same control path have reached a reconvergence point, which is a beginning of a program code segment to be executed by both a taken branch and a not taken branch from a previous branch instruction. The dynamic wavefronts are repacked with all threads that follow the same control path, if all wavefronts following the same control path have reached the branch instruction or the reconvergence point.

  20. Integrating post-Newtonian equations on graphics processing units

    Energy Technology Data Exchange (ETDEWEB)

    Herrmann, Frank; Tiglio, Manuel [Department of Physics, Center for Fundamental Physics, and Center for Scientific Computation and Mathematical Modeling, University of Maryland, College Park, MD 20742 (United States); Silberholz, John [Center for Scientific Computation and Mathematical Modeling, University of Maryland, College Park, MD 20742 (United States); Bellone, Matias [Facultad de Matematica, Astronomia y Fisica, Universidad Nacional de Cordoba, Cordoba 5000 (Argentina); Guerberoff, Gustavo, E-mail: tiglio@umd.ed [Facultad de Ingenieria, Instituto de Matematica y Estadistica ' Prof. Ing. Rafael Laguardia' , Universidad de la Republica, Montevideo (Uruguay)

    2010-02-07

    We report on early results of a numerical and statistical study of binary black hole inspirals. The two black holes are evolved using post-Newtonian approximations starting with initially randomly distributed spin vectors. We characterize certain aspects of the distribution shortly before merger. In particular we note the uniform distribution of black hole spin vector dot products shortly before merger and a high correlation between the initial and final black hole spin vector dot products in the equal-mass, maximally spinning case. More than 300 million simulations were performed on graphics processing units, and we demonstrate a speed-up of a factor 50 over a more conventional CPU implementation. (fast track communication)

  1. Graphics processing units accelerated semiclassical initial value representation molecular dynamics

    Energy Technology Data Exchange (ETDEWEB)

    Tamascelli, Dario; Dambrosio, Francesco Saverio [Dipartimento di Fisica, Università degli Studi di Milano, via Celoria 16, 20133 Milano (Italy); Conte, Riccardo [Department of Chemistry and Cherry L. Emerson Center for Scientific Computation, Emory University, Atlanta, Georgia 30322 (United States); Ceotto, Michele, E-mail: michele.ceotto@unimi.it [Dipartimento di Chimica, Università degli Studi di Milano, via Golgi 19, 20133 Milano (Italy)

    2014-05-07

    This paper presents a Graphics Processing Units (GPUs) implementation of the Semiclassical Initial Value Representation (SC-IVR) propagator for vibrational molecular spectroscopy calculations. The time-averaging formulation of the SC-IVR for power spectrum calculations is employed. Details about the GPU implementation of the semiclassical code are provided. Four molecules with an increasing number of atoms are considered and the GPU-calculated vibrational frequencies perfectly match the benchmark values. The computational time scaling of two GPUs (NVIDIA Tesla C2075 and Kepler K20), respectively, versus two CPUs (Intel Core i5 and Intel Xeon E5-2687W) and the critical issues related to the GPU implementation are discussed. The resulting reduction in computational time and power consumption is significant and semiclassical GPU calculations are shown to be environment friendly.

  2. From bentonite powder to engineered barrier units - an industrial process

    International Nuclear Information System (INIS)

    Gatabin, Claude; Guyot, Jean-Luc; Resnikow, Serge; Bosgiraud, Jean-Michel; Londe, Louis; Seidler, Wolf

    2008-01-01

    In the framework of the ESDRED Project, a consortium, called GME, dealt with the study and development of all required industrial processes for the fabrication of scale-1 buffer rings and discs, as well as all related means for transporting and handling the rings, the assembly in 4-unit sets, the packaging of buffer-ring assemblies, and all associated procedures. In 2006, a 100-t mould was built in order to compact in a few hours 12 rings and two discs measuring 2.3 m in diameter and 0.5 m in height, and weighing 4 t each. The ring-handling, assembly and transport means were tested successfully in 2007. (author)

  3. Opportunities in the United States' gas processing industry

    International Nuclear Information System (INIS)

    Meyer, H.S.; Leppin, D.

    1997-01-01

    To keep up with the increasing amount of natural gas that will be required by the market and with the decreasing quality of the gas at the well-head, the gas processing industry must look to new technologies to stay competitive. The Gas Research Institute (GR); is managing a research, development, design and deployment program that is projected to save the industry US dollar 230 million/year in operating and capital costs from gas processing related activities in NGL extraction and recovery, dehydration, acid gas removal/sulfur recovery, and nitrogen rejection. Three technologies are addressed here. Multivariable Control (MVC) technology for predictive process control and optimization is installed or in design at fourteen facilities treating a combined total of over 30x10 9 normal cubic meter per year (BN m 3 /y) [1.1x10 12 standard cubic feet per year (Tcf/y)]. Simple pay backs are typically under 6 months. A new acid gas removal process based on n-formyl morpholine (NFM) is being field tested that offers 40-50% savings in operating costs and 15-30% savings in capital costs relative to a commercially available physical solvent. The GRI-MemCalc TM Computer Program for Membrane Separations and the GRI-Scavenger CalcBase TM Computer Program for Scavenging Technologies are screening tools that engineers can use to determine the best practice for treating their gas. (au) 19 refs

  4. Research Notes ~ Selecting Research Areas and Research Design Approaches in Distance Education: Process Issues

    Directory of Open Access Journals (Sweden)

    Sudarshan Mishra

    2004-11-01

    Full Text Available The purpose of this paper is to study the process used for selecting research areas and methodological approaches in distance education in India. Experts from the field of distance education in India were interviewed at length, with the aim of collecting qualitative data on opinions on process-issues for selecting areas for research, research design, and appropriate methodological approaches in distance education. Data collected from these interviews were subjected to content analysis; triangulation and peer consultation techniques were used for cross-checking and data verification. While the findings and recommendations of this study have limited application in that they can only be used in the specific context outlined in this paper, respondents in this study nonetheless revealed the pressing need for more process-oriented research in examining media and technology, learners and learning, and distance learning evaluation processes. Our research, which yielded interesting empirical findings, also determined that a mixed approach – one that involves both quantitative and qualitative methods – is more appropriate for conducting research in distance education in India. Qualitative evidence from our research also indicates that respondents interviewed felt that emphasis should be placed on interdisciplinary and systemic research, over that of traditional disciplinary research. Research methods such as student self-reporting, extensive and highly targeted interviews, conversation and discourse analysis, were determined to as useful for data collection for this study.

  5. Public and nonprofit funding for research on mental disorders in France, the United Kingdom, and the United States.

    Science.gov (United States)

    Chevreul, Karine; McDaid, David; Farmer, Carrie M; Prigent, Amélie; Park, A-La; Leboyer, Marion; Kupfer, David J; Durand-Zaleski, Isabelle

    2012-07-01

    To document the investments made in research on mental disorders by both government and nonprofit nongovernmental organizations in France, the United Kingdom, and the United States. An exhaustive survey was conducted of primary sources of public and nonprofit organization funding for mental health research for the year 2007 in France and the United Kingdom and for fiscal year 2007-2008 in the United States, augmented with an examination of relevant Web sites and publications. In France, all universities and research institutions were identified using the Public Finance Act. In the United Kingdom, we scrutinized Web sites and hand searched annual reports and grant lists for the public sector and nonprofit charitable medical research awarding bodies. In the United States, we included the following sources: the National Institutes of Health, other administrative entities within the Department of Health and Human Services (eg, Centers for Disease Control and Prevention), the Department of Education, the Department of Veterans Affairs, the Department of Defense, and the National Science Foundation and, for nonprofit funding, The Foundation Center. We included research on all mental disorders and substance-related disorders using the same keywords. We excluded research on mental retardation and dementia and on the promotion of mental well-being. We used the same algorithm in each country to obtain data for only mental health funding in situations in which funding had a broader scope. France spent $27.6 million (2%) of its health research budget on mental disorders, the United Kingdom spent $172.6 million (7%), and the United States spent $5.2 billion (16%). Nongovernmental funding ranged from 1% of total funding for mental health research in France and the United States to 14% in the United Kingdom. Funding for research on mental disorders accounts for low proportions of research budgets compared with funding levels for research on other major health problems, whereas

  6. 2004 research briefs :Materials and Process Sciences Center.

    Energy Technology Data Exchange (ETDEWEB)

    Cieslak, Michael J.

    2004-01-01

    This report is the latest in a continuing series that highlights the recent technical accomplishments associated with the work being performed within the Materials and Process Sciences Center. Our research and development activities primarily address the materials-engineering needs of Sandia's Nuclear-Weapons (NW) program. In addition, we have significant efforts that support programs managed by the other laboratory business units. Our wide range of activities occurs within six thematic areas: Materials Aging and Reliability, Scientifically Engineered Materials, Materials Processing, Materials Characterization, Materials for Microsystems, and Materials Modeling and Simulation. We believe these highlights collectively demonstrate the importance that a strong materials-science base has on the ultimate success of the NW program and the overall DOE technology portfolio.

  7. Fire Process Research Natural Areas: Managing research and restoration of dynamic ecosystem processes

    Science.gov (United States)

    Timothy Ingalsbee

    2001-01-01

    Since 1992 a collaborative group of fire scientists, forest conservationists, and Federal resource specialists have been developing proposals for a Research Natural Area (RNA) in the Warner Creek Fire area on the Willamette National Forest in Oregon. Inspired by these proposals, the Oregon Natural Heritage Plan created the new category of "Fire Process RNAs"...

  8. Researching the Parallel Process in Supervision and Psychotherapy

    DEFF Research Database (Denmark)

    Jacobsen, Claus Haugaard

    Reflects upon how to do process research in supervision and in the parallel process. A single case study is presented illustrating how a study on parallel process can be carried out.......Reflects upon how to do process research in supervision and in the parallel process. A single case study is presented illustrating how a study on parallel process can be carried out....

  9. Evidence of a sensory processing unit in the mammalian macula

    Science.gov (United States)

    Chimento, T. C.; Ross, M. D.

    1996-01-01

    We cut serial sections through the medial part of the rat vestibular macula for transmission electron microscopic (TEM) examination, computer-assisted 3-D reconstruction, and compartmental modeling. The ultrastructural research showed that many primary vestibular neurons have an unmyelinated segment, often branched, that extends between the heminode (putative site of the spike initiation zone) and the expanded terminal(s) (calyx, calyces). These segments, termed the neuron branches, and the calyces frequently have spine-like processes of various dimensions with bouton endings that morphologically are afferent, efferent, or reciprocal to other macular neural elements. The major questions posed by this study were whether small details of morphology, such as the size and location of neuronal processes or synapses, could influence the output of a vestibular afferent, and whether a knowledge of morphological details could guide the selection of values for simulation parameters. The conclusions from our simulations are (1) values of 5.0 k omega cm2 for membrane resistivity and 1.0 nS for synaptic conductance yield simulations that best match published physiological results; (2) process morphology has little effect on orthodromic spread of depolarization from the head (bouton) to the spike initiation zone (SIZ); (3) process morphology has no effect on antidromic spread of depolarization to the process head; (4) synapses do not sum linearly; (5) synapses are electrically close to the SIZ; and (6) all whole-cell simulations should be run with an active SIZ.

  10. The ATLAS Fast TracKer Processing Units

    CERN Document Server

    Krizka, Karol; The ATLAS collaboration

    2016-01-01

    The Fast Tracker is a hardware upgrade to the ATLAS trigger and data-acquisition system, with the goal of providing global track reconstruction by the start of the High Level Trigger starts. The Fast Tracker can process incoming data from the whole inner detector at full first level trigger rate, up to 100 kHz, using custom electronic boards. At the core of the system is a Processing Unit installed in a VMEbus crate, formed by two sets of boards: the Associative Memory Board and a powerful rear transition module called the Auxiliary card, while the second set is the Second Stage board. The associative memories perform the pattern matching looking for correlations within the incoming data, compatible with track candidates at coarse resolution. The pattern matching task is performed using custom application specific integrated circuits, called associative memory chips. The auxiliary card prepares the input and reject bad track candidates obtained from from the Associative Memory Board using the full precision a...

  11. The ATLAS Fast Tracker Processing Units - track finding and fitting

    CERN Document Server

    AUTHOR|(INSPIRE)INSPIRE-00384270; The ATLAS collaboration; Alison, John; Ancu, Lucian Stefan; Andreani, Alessandro; Annovi, Alberto; Beccherle, Roberto; Beretta, Matteo; Biesuz, Nicolo Vladi; Bogdan, Mircea Arghir; Bryant, Patrick; Calabro, Domenico; Citraro, Saverio; Crescioli, Francesco; Dell'Orso, Mauro; Donati, Simone; Gentsos, Christos; Giannetti, Paola; Gkaitatzis, Stamatios; Gramling, Johanna; Greco, Virginia; Horyn, Lesya Anna; Iovene, Alessandro; Kalaitzidis, Panagiotis; Kim, Young-Kee; Kimura, Naoki; Kordas, Kostantinos; Kubota, Takashi; Lanza, Agostino; Liberali, Valentino; Luciano, Pierluigi; Magnin, Betty; Sakellariou, Andreas; Sampsonidis, Dimitrios; Saxon, James; Shojaii, Seyed Ruhollah; Sotiropoulou, Calliope Louisa; Stabile, Alberto; Swiatlowski, Maximilian; Volpi, Guido; Zou, Rui; Shochet, Mel

    2016-01-01

    The Fast Tracker is a hardware upgrade to the ATLAS trigger and data-acquisition system, with the goal of providing global track reconstruction by the start of the High Level Trigger starts. The Fast Tracker can process incoming data from the whole inner detector at full first level trigger rate, up to 100 kHz, using custom electronic boards. At the core of the system is a Processing Unit installed in a VMEbus crate, formed by two sets of boards: the Associative Memory Board and a powerful rear transition module called the Auxiliary card, while the second set is the Second Stage board. The associative memories perform the pattern matching looking for correlations within the incoming data, compatible with track candidates at coarse resolution. The pattern matching task is performed using custom application specific integrated circuits, called associative memory chips. The auxiliary card prepares the input and reject bad track candidates obtained from from the Associative Memory Board using the full precision a...

  12. The characteristics analysis of torque and rotation speed of working unit of branch grinder - introductory research

    Directory of Open Access Journals (Sweden)

    Warguła Łukasz

    2018-01-01

    Full Text Available Carrying out a realistic research on working units of machines that grinder waste coming from tree and bush trimming requires designing machines that would be more efficient. It is neccesary both to introduce the analysis of already existing solutions as well as searching for innovative ones that would result in the increase of efficiency, lowering the costs and time needed as well as lower exhaust emission into the atmosphere. The results presented below will be used for the following purposes: the analysis of grinding process that supplies data to cunstruct simulating models that reflect the real working conditions of grinding machines. The results of the experiments will allow to estimate the influence of construction featrures, including the ones connected with automatisation. The importance of the carried out research is also applicable to the analisys of influence of grinding process on the form of flakes that result from the process, energy consumption. It also allows to make conclusions leading to the improvement of the processes that use grinded mass.The construction specifity of ths kind of machines and their working principles results from the fact, that the cutting process they perform concerns orthotropic plant material that has inhomogenic structure and physical-chemical properties requires further analysis. The article presents the construcion of a research stand designed to record the characteristisc of changes of the torque and rotation speed of working unit of mill chopper type MQS2800 Macalister. The introductory research results presented below point out that depending on the position of the sample (along the grain against the mill chopper significantly influences on the form of generated changes of the torque. The research stand that has been designed and constructed allows the analysis of both construction features of the chopper as well via the assessment of grinding process also separte paremeters of processed wood.

  13. Connecting Arctic Research Across Boundaries through the Arctic Research Consortium of the United States (ARCUS)

    Science.gov (United States)

    Rich, R. H.; Myers, B.; Wiggins, H. V.; Zolkos, J.

    2017-12-01

    The complexities inherent in Arctic research demand a unique focus on making connections across the boundaries of discipline, institution, sector, geography, knowledge system, and culture. Since 1988, ARCUS has been working to bridge these gaps through communication, coordination, and collaboration. Recently, we have worked with partners to create a synthesis of the Arctic system, to explore the connectivity across the Arctic research community and how to strengthen it, to enable the community to have an effective voice in research funding policy, to implement a system for Arctic research community knowledge management, to bridge between global Sea Ice Prediction Network researchers and the science needs of coastal Alaska communities through the Sea Ice for Walrus Outlook, to strengthen ties between Polar researchers and educators, and to provide essential intangible infrastructure that enables cost-effective and productive research across boundaries. Employing expertise in managing for collaboration and interdisciplinarity, ARCUS complements and enables the work of its members, who constitute the Arctic research community and its key stakeholders. As a member-driven organization, everything that ARCUS does is achieved through partnership, with strong volunteer leadership of each activity. Key organizational partners in the United States include the U.S. Arctic Research Commission, Interagency Arctic Research Policy Committee, National Academy of Sciences Polar Research Board, and the North Slope Science Initiative. Internationally, ARCUS maintains strong bilateral connections with similarly focused groups in each Arctic country (and those interested in the Arctic), as well as with multinational organizations including the International Arctic Science Committee, the Association of Polar Early Career Educators, the University of the Arctic, and the Arctic Institute of North America. Currently, ARCUS is applying the best practices of the science of team science

  14. A Mixed-Methods Research Framework for Healthcare Process Improvement.

    Science.gov (United States)

    Bastian, Nathaniel D; Munoz, David; Ventura, Marta

    2016-01-01

    The healthcare system in the United States is spiraling out of control due to ever-increasing costs without significant improvements in quality, access to care, satisfaction, and efficiency. Efficient workflow is paramount to improving healthcare value while maintaining the utmost standards of patient care and provider satisfaction in high stress environments. This article provides healthcare managers and quality engineers with a practical healthcare process improvement framework to assess, measure and improve clinical workflow processes. The proposed mixed-methods research framework integrates qualitative and quantitative tools to foster the improvement of processes and workflow in a systematic way. The framework consists of three distinct phases: 1) stakeholder analysis, 2a) survey design, 2b) time-motion study, and 3) process improvement. The proposed framework is applied to the pediatric intensive care unit of the Penn State Hershey Children's Hospital. The implementation of this methodology led to identification and categorization of different workflow tasks and activities into both value-added and non-value added in an effort to provide more valuable and higher quality patient care. Based upon the lessons learned from the case study, the three-phase methodology provides a better, broader, leaner, and holistic assessment of clinical workflow. The proposed framework can be implemented in various healthcare settings to support continuous improvement efforts in which complexity is a daily element that impacts workflow. We proffer a general methodology for process improvement in a healthcare setting, providing decision makers and stakeholders with a useful framework to help their organizations improve efficiency. Published by Elsevier Inc.

  15. Software process improvement in a research environment

    NARCIS (Netherlands)

    Velden, van der M.J.; Hendriks, P.R.H.; Udink ten Cate, A.J.

    1995-01-01

    Research organizations pay much attention to the quality of their work, but not always to the quality of the software they produce within research projects. This is not a healthy situation since research organizations are becoming more and more dependent on software development. This paper describes

  16. Difficulties Encountered by Academicians in Academic Research Processes in Universities

    Science.gov (United States)

    Yalçin, Sinan; Altun Yalçin, Sema

    2017-01-01

    This present research, aimed to determine the occasions, which the academicians encountered during the academic research process and how these affect the research process, was prepared as a case study pattern among the qualitative research methods. 34 academicians, who were working in a university in Turkey, participated in the research. The data…

  17. The Medical Research Council (UK)/Uganda Virus Research Institute Uganda Research Unit on AIDS--'25 years of research through partnerships'.

    Science.gov (United States)

    Kaleebu, P; Kamali, A; Seeley, J; Elliott, A M; Katongole-Mbidde, E

    2015-02-01

    For the past 25 years, the Medical Research Council/Uganda Virus Research Institute Uganda Research Unit on AIDS has conducted research on HIV-1, coinfections and, more recently, on non-communicable diseases. Working with various partners, the research findings of the Unit have contributed to the understanding and control of the HIV epidemic both in Uganda and globally, and informed the future development of biomedical HIV interventions, health policy and practice. In this report, as we celebrate our silver jubilee, we describe some of these achievements and the Unit's multidisciplinary approach to research. We also discuss the future direction of the Unit; an exemplar of a partnership that has been largely funded from the north but led in the south. © 2014 The Authors. Tropical Medicine & International Health Published by John Wiley & Sons Ltd.

  18. Monte Carlo MP2 on Many Graphical Processing Units.

    Science.gov (United States)

    Doran, Alexander E; Hirata, So

    2016-10-11

    In the Monte Carlo second-order many-body perturbation (MC-MP2) method, the long sum-of-product matrix expression of the MP2 energy, whose literal evaluation may be poorly scalable, is recast into a single high-dimensional integral of functions of electron pair coordinates, which is evaluated by the scalable method of Monte Carlo integration. The sampling efficiency is further accelerated by the redundant-walker algorithm, which allows a maximal reuse of electron pairs. Here, a multitude of graphical processing units (GPUs) offers a uniquely ideal platform to expose multilevel parallelism: fine-grain data-parallelism for the redundant-walker algorithm in which millions of threads compute and share orbital amplitudes on each GPU; coarse-grain instruction-parallelism for near-independent Monte Carlo integrations on many GPUs with few and infrequent interprocessor communications. While the efficiency boost by the redundant-walker algorithm on central processing units (CPUs) grows linearly with the number of electron pairs and tends to saturate when the latter exceeds the number of orbitals, on a GPU it grows quadratically before it increases linearly and then eventually saturates at a much larger number of pairs. This is because the orbital constructions are nearly perfectly parallelized on a GPU and thus completed in a near-constant time regardless of the number of pairs. In consequence, an MC-MP2/cc-pVDZ calculation of a benzene dimer is 2700 times faster on 256 GPUs (using 2048 electron pairs) than on two CPUs, each with 8 cores (which can use only up to 256 pairs effectively). We also numerically determine that the cost to achieve a given relative statistical uncertainty in an MC-MP2 energy increases as O(n 3 ) or better with system size n, which may be compared with the O(n 5 ) scaling of the conventional implementation of deterministic MP2. We thus establish the scalability of MC-MP2 with both system and computer sizes.

  19. FEATURES OF THE SOCIO-POLITICAL PROCESS IN THE UNITED STATES

    Directory of Open Access Journals (Sweden)

    Tatyana Evgenevna Beydina

    2017-06-01

    Full Text Available The subject of this article is the study of political and social developments of the USA at the present stage. There are four stages of the American tradition of studying political processes. The first stage is connected with substantiation of the Executive, Legislative and Judicial branches of political system (works of F. Pollack and R. Sili. The second one includes behavioral studies of politics. Besides studying political processes Charles Merriam has studied their similarities and differences. The third stage is characterized by political system studies – the works of T. Parsons, D. Easton, R. Aron, G. Almond and K. Deutsch. The fourth stage is characterized by superpower and the systems democratization problem (S. Huntington, Zb. Bzhezinsky. American social processes were qualified by R. Park, P. Sorokin, E. Giddens. The work is concentrated on the divided explanation of social and political processes of the us and the reflection of unity of American social-political reality. Academic novelty is composed of substantiation of the US social-political process concept and characterization of its features. The US social-political process is characterized by two channels: soft power and aggression. Soft power appears in the US economy dominancy. The main results of the research are features of the socio-political process in the United States. Purpose: the main goal of the research is to systematize the definition of social-political process of the USA and estimate the line of its study within American political tradition. Methodology: in this article have used methods: such as system, comparison and historical analysis, structural-functional analysis. Results: during the research the analysis of the dynamics of social and political processes of the United States had been made. Practical implications it is expedient to apply the received results in the international relation theory and practice.

  20. Technology of research of hydroturbine unit work using seismic methods

    Science.gov (United States)

    Seleznev, V. S.; Liseikin, A. V.; Gromyko, P. V.; Soloviev, V. M.

    2013-05-01

    On August, 17, 2009 one of the most significant accident in hydropower engineering was happened at Sayano-Shushenskaya Hydroelectric Power Station. Specialists of Geophysical Survey SB RAS took part in the State Committee on investigation of the accident cause at Sayano-Shushenskaya HPS. It was determined, that the cause of the accident was a break of stud-bolts on the turbine cover. Why stud-bolts did not stand a load? There were assumptions that hydraulic shock provoked the accident. But, if it is so, seismic station "Cheremushky", situated in 4 km away from the HPS, should has a record of this event. First of all, investigating the record, got at the seismic station in the moment of the accident, it was determined that strength of seismic waves, recorded at the moment of the accident, did not exceed strength of waves got at trotyl explosion of 500 g at a distance to 4 km. The version of hydraulic shock was not proved. There were distinguished low-frequency oscillations and it was determined that the hydroturbine unit (HU) had been raised up more then 10 m in height for 10 sec. Analyzing the seismic station records during the period of more than a year before the accident and records of operating modes of different HU, there was determined that oscillations radiated by second (damaged) HU were approximately 1.5 times more intense than oscillations from all other HU. After the accident at Sayano-Shushenskaya HPS hydroturbine units were started in turns: at first there were started hydroturbine units of old construction (3, 4, 5, 6), then HP of new construction (1, 7, 8, 9). We installed 10 - 15 three-component seismic stations in different points around a HU and studied field of seismic oscillations from it's work. It was determined, that HU radiates a set of monochromatic oscillations divisible by speed of rotation equal to 2.381 Hz. Change of these signals amplitude is connected with change of HU operation modes. Research of changes in oscillations spectral

  1. Medical researchers unite for study on cancer intervention

    Directory of Open Access Journals (Sweden)

    Editorial Office

    2016-08-01

    Full Text Available We introduce Drs. Antoine Snijders and Jian-Hua Mao, whose article is published in this issue of AMOR and discuss their views on cancer genetics, targeted therapy, and personalized medicine.Having worked together in numerous joint investigations that have yielded significant results, Dr. Snijders and Dr. Mao would most definitely agree that two heads are better than one. “Researchers these days need to have the ability to collaborate across many different disciplines,” said the duo in an exclusive interview with AMOR. Dr. Snijders and Dr. Mao, both with PhDs in cancer genetics and genomics, are currently based at the Biological Systems and Engineering Division of Lawrence Berkeley National Laboratory, California, which is a member of the national laboratory system supported by the U.S Department of Energy through its Office of Science. The Berkeley Lab is well known for producing excellent scholars, as thirteen Nobel Prize winners are affiliated with the Lab and seventy of its scientists are members of the National Academy of Sciences (NAS, one of the highest honors for a scientist in the United States. Dr. Snijders, a Dutch who has conducted his research at Berkeley Lab for the past eight years, did his Masters in Science (Medical Biology at the Vrije Universiteit Amsterdam, Netherlands – an institute with a strong focus on scientific research and is home to five Spinoza Prize (a.k.a. the “Dutch Nobel” winners. Dr. Snijders’s PhD (cum laude in cancer and molecular biology was awarded by University Utrecht in Netherlands, but his research work was carried out at the University of California San Francisco. Subsequently, he continued his postdoctoral research in molecular cytogenetics at the same institution. A prolific author of 114 publications (with 3,851 citations according to ResearchGate, Dr. Snijders – who also volunteers with California’s Contra Costa County Search and Rescue team for missing persons – has interests in

  2. 32 CFR 516.12 - Service of civil process outside the United States.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 3 2010-07-01 2010-07-01 true Service of civil process outside the United... AID OF CIVIL AUTHORITIES AND PUBLIC RELATIONS LITIGATION Service of Process § 516.12 Service of civil process outside the United States. (a) Process of foreign courts. In foreign countries service of process...

  3. Towards a Unified Sentiment Lexicon Based on Graphics Processing Units

    Directory of Open Access Journals (Sweden)

    Liliana Ibeth Barbosa-Santillán

    2014-01-01

    Full Text Available This paper presents an approach to create what we have called a Unified Sentiment Lexicon (USL. This approach aims at aligning, unifying, and expanding the set of sentiment lexicons which are available on the web in order to increase their robustness of coverage. One problem related to the task of the automatic unification of different scores of sentiment lexicons is that there are multiple lexical entries for which the classification of positive, negative, or neutral {P,N,Z} depends on the unit of measurement used in the annotation methodology of the source sentiment lexicon. Our USL approach computes the unified strength of polarity of each lexical entry based on the Pearson correlation coefficient which measures how correlated lexical entries are with a value between 1 and −1, where 1 indicates that the lexical entries are perfectly correlated, 0 indicates no correlation, and −1 means they are perfectly inversely correlated and so is the UnifiedMetrics procedure for CPU and GPU, respectively. Another problem is the high processing time required for computing all the lexical entries in the unification task. Thus, the USL approach computes a subset of lexical entries in each of the 1344 GPU cores and uses parallel processing in order to unify 155802 lexical entries. The results of the analysis conducted using the USL approach show that the USL has 95.430 lexical entries, out of which there are 35.201 considered to be positive, 22.029 negative, and 38.200 neutral. Finally, the runtime was 10 minutes for 95.430 lexical entries; this allows a reduction of the time computing for the UnifiedMetrics by 3 times.

  4. Accelerating VASP electronic structure calculations using graphic processing units

    KAUST Repository

    Hacene, Mohamed

    2012-08-20

    We present a way to improve the performance of the electronic structure Vienna Ab initio Simulation Package (VASP) program. We show that high-performance computers equipped with graphics processing units (GPUs) as accelerators may reduce drastically the computation time when offloading these sections to the graphic chips. The procedure consists of (i) profiling the performance of the code to isolate the time-consuming parts, (ii) rewriting these so that the algorithms become better-suited for the chosen graphic accelerator, and (iii) optimizing memory traffic between the host computer and the GPU accelerator. We chose to accelerate VASP with NVIDIA GPU using CUDA. We compare the GPU and original versions of VASP by evaluating the Davidson and RMM-DIIS algorithms on chemical systems of up to 1100 atoms. In these tests, the total time is reduced by a factor between 3 and 8 when running on n (CPU core + GPU) compared to n CPU cores only, without any accuracy loss. © 2012 Wiley Periodicals, Inc.

  5. Smoldyn on graphics processing units: massively parallel Brownian dynamics simulations.

    Science.gov (United States)

    Dematté, Lorenzo

    2012-01-01

    Space is a very important aspect in the simulation of biochemical systems; recently, the need for simulation algorithms able to cope with space is becoming more and more compelling. Complex and detailed models of biochemical systems need to deal with the movement of single molecules and particles, taking into consideration localized fluctuations, transportation phenomena, and diffusion. A common drawback of spatial models lies in their complexity: models can become very large, and their simulation could be time consuming, especially if we want to capture the systems behavior in a reliable way using stochastic methods in conjunction with a high spatial resolution. In order to deliver the promise done by systems biology to be able to understand a system as whole, we need to scale up the size of models we are able to simulate, moving from sequential to parallel simulation algorithms. In this paper, we analyze Smoldyn, a widely diffused algorithm for stochastic simulation of chemical reactions with spatial resolution and single molecule detail, and we propose an alternative, innovative implementation that exploits the parallelism of Graphics Processing Units (GPUs). The implementation executes the most computational demanding steps (computation of diffusion, unimolecular, and bimolecular reaction, as well as the most common cases of molecule-surface interaction) on the GPU, computing them in parallel on each molecule of the system. The implementation offers good speed-ups and real time, high quality graphics output

  6. Accelerating VASP electronic structure calculations using graphic processing units

    KAUST Repository

    Hacene, Mohamed; Anciaux-Sedrakian, Ani; Rozanska, Xavier; Klahr, Diego; Guignon, Thomas; Fleurat-Lessard, Paul

    2012-01-01

    We present a way to improve the performance of the electronic structure Vienna Ab initio Simulation Package (VASP) program. We show that high-performance computers equipped with graphics processing units (GPUs) as accelerators may reduce drastically the computation time when offloading these sections to the graphic chips. The procedure consists of (i) profiling the performance of the code to isolate the time-consuming parts, (ii) rewriting these so that the algorithms become better-suited for the chosen graphic accelerator, and (iii) optimizing memory traffic between the host computer and the GPU accelerator. We chose to accelerate VASP with NVIDIA GPU using CUDA. We compare the GPU and original versions of VASP by evaluating the Davidson and RMM-DIIS algorithms on chemical systems of up to 1100 atoms. In these tests, the total time is reduced by a factor between 3 and 8 when running on n (CPU core + GPU) compared to n CPU cores only, without any accuracy loss. © 2012 Wiley Periodicals, Inc.

  7. Orthographic units in the absence of visual processing: Evidence from sublexical structure in braille.

    Science.gov (United States)

    Fischer-Baum, Simon; Englebretson, Robert

    2016-08-01

    Reading relies on the recognition of units larger than single letters and smaller than whole words. Previous research has linked sublexical structures in reading to properties of the visual system, specifically on the parallel processing of letters that the visual system enables. But whether the visual system is essential for this to happen, or whether the recognition of sublexical structures may emerge by other means, is an open question. To address this question, we investigate braille, a writing system that relies exclusively on the tactile rather than the visual modality. We provide experimental evidence demonstrating that adult readers of (English) braille are sensitive to sublexical units. Contrary to prior assumptions in the braille research literature, we find strong evidence that braille readers do indeed access sublexical structure, namely the processing of multi-cell contractions as single orthographic units and the recognition of morphemes within morphologically-complex words. Therefore, we conclude that the recognition of sublexical structure is not exclusively tied to the visual system. However, our findings also suggest that there are aspects of morphological processing on which braille and print readers differ, and that these differences may, crucially, be related to reading using the tactile rather than the visual sensory modality. Copyright © 2016 Elsevier B.V. All rights reserved.

  8. Current nondestructive evaluation research and development trends in the United States

    International Nuclear Information System (INIS)

    Jackson, Jerry

    1992-01-01

    An underlying theme present in much of the nondestructive evaluation (NDE) research and development occurring in the United States as well as worldwide is the application of physics and engineering principles toward understanding and optimizing NDE processes. Expanding this trend of using mathematical models for NDE processes is critical to the entire spectrum of NDE technology. In NDE research, modeling anchors the investigation in scientific, proven principles and establishes a firm technical basis to guide the design and development of inspection equipment and approaches. It also provides for understanding the capabilities and the limitations of whatever designs are selected and ultimately applied in the field. This paper reviews the status of these efforts, presents several examples where mathematical modeling is being profitably used for practical inspection work, and shows the path being taken in ongoing research.

  9. The Applied Meteorology Unit: Nineteen Years Successfully Transitioning Research Into Operations for America's Space Program

    Science.gov (United States)

    Madura, John T.; Bauman, William H., III; Merceret, Francis J.; Roeder, William P.; Brody, Frank C.; Hagemeyer, Bartlett C.

    2011-01-01

    The Applied Meteorology Unit (AMU) provides technology development and transition services to improve operational weather support to America's space program . The AMU was founded in 1991 and operates under a triagency Memorandum of Understanding (MOU) between the National Aeronautics and Space Administration (NASA), the United States Air Force (USAF) and the National Weather Service (NWS) (Ernst and Merceret, 1995). It is colocated with the 45th Weather Squadron (45WS) at Cape Canaveral Air Force Station (CCAFS) and funded by the Space Shuttle Program . Its primary customers are the 45WS, the Spaceflight Meteorology Group (SMG) operated for NASA by the NWS at the Johnson Space Center (JSC) in Houston, TX, and the NWS forecast office in Melbourne, FL (MLB). The gap between research and operations is well known. All too frequently, the process of transitioning research to operations fails for various reasons. The mission of the AMU is in essence to bridge this gap for America's space program.

  10. Changing the Translational Research Landscape: A Review of the Impacts of Biomedical Research Units in England.

    Science.gov (United States)

    Marjanovic, Sonja; Soper, Bryony; Ismail, Sharif; Reding, Anais; Ling, Tom

    2012-01-01

    This article describes a review of the Biomedical Research Units (BRU) scheme, undertaken for the Department of Health. This review was a perceptions audit of senior executives involved in the scheme, and explored what impact they felt the scheme is having on the translational research landscape. More specifically, we investigated whether and how institutional relationships between NHS and academic partners, industry and other health research system players are changing because of the scheme; how the scheme is helping build critical mass in specific priority disease areas; and the effects of any changes on efforts to deliver the broader goals set out in Best Research for Best Health. The views presented are those of study informants only. The information obtained through our interviews suggests that the BRU scheme is significantly helping shape the health research system to pursue translational research and innovation, with the clear goal of realising patient benefit. The BRUs are already contributing to observable changes in institutional relationships between the NHS and academic partners: trusts and medical schools are collaborating more closely than in the past, have signed up to the same vision of translational research from bench to bedside, and are managing and governing targeted research resources more professionally and transparently than in the past. There is also a stronger emphasis on engaging industry and more strategic thinking about strengthening regional and national collaboration with other hospital trusts, PCTs, research organisations, networks and development agencies. The scheme is also transforming capacity building in the health research system. This includes (i) developing and modernising facilities and equipment for translation; (ii) building a critical mass of human resources through recruitment and training, as well as improving retention of existing expertise; and (iii) helping ensure a steady flow of funds needed to sustain research

  11. Multi-unit Integration in Microfluidic Processes: Current Status and Future Horizons

    Directory of Open Access Journals (Sweden)

    Pratap R. Patnaik

    2011-07-01

    Full Text Available Microfluidic processes, mainly for biological and chemical applications, have expanded rapidly in recent years. While the initial focus was on single units, principally microreactors, technological and economic considerations have caused a shift to integrated microchips in which a number of microdevices function coherently. These integrated devices have many advantages over conventional macro-scale processes. However, the small scale of operation, complexities in the underlying physics and chemistry, and differences in the time constants of the participating units, in the interactions among them and in the outputs of interest make it difficult to design and optimize integrated microprocesses. These aspects are discussed here, current research and applications are reviewed, and possible future directions are considered.

  12. Developing nursing research in the United Arab Emirates: a narrative review.

    Science.gov (United States)

    McCreaddie, M; Kuzemski, D; Griffiths, J; Sojka, E M; Fielding, M; Al Yateem, N; Williams, J J

    2018-03-01

    This article identified, critically analysed and synthesized the literature on international nursing and midwifery research capacity building and standards. The United Arab Emirates is heavily dependent up on expatriate nurses. Only 4% of nurses working within the country are Emirati. The nation is therefore committed to developing nurses and nursing as a profession. The United Arab Emirates' Nursing and Midwifery Council was formed in 2009 and initially focused on regulation, education and specialization. This review was undertaken to inform the work of the Council's newly established Scientific Research Sub-Committee. A rapid narrative review was conducted using the Cumulative Index of Nursing and Allied Health Literature database, key words, Boolean operators, parameters and a journal-specific search. An inclusion/exclusion criterion was identified. The search provided 332 articles with 45 included in the final review. The literature on nursing research 'standards' and 'capacity building' is diverse and inconsistent across continents and in approaches. Nursing research has evolved to varying degrees across the globe. Nevertheless, irrespective of the locale, there are similar problems encountered in growing research, for example nursing faculty shortage, lack of collaborative research, funding. There are also specific challenges in the Middle East and North Africa region. The review was constrained by time and access. There are specific challenges for the United Arab Emirates. However, the country is well placed to learn from the experiences of colleagues elsewhere. Time and commitment is required to build the solid foundations necessary to ensure robust, sustained growth. Identifying research capacity as both a process and outcome at the outset may also assist. Further, it may be prudent to consider initiating a Gulf Coast Countries' collaborative approach to building research capacity to harness scare resources and create a larger critical mass. © 2017

  13. Research on Anoplophora glabripennis in the United States

    Science.gov (United States)

    Robert A. Haack

    2003-01-01

    In the mid-1990s it was estimated that more than 400 exotic (non-native) forest insects had already become established in the United States (HAACK and BYLER, 1993; MATTSON et al., 1994; NIEMELA and MATTSON, 1996). This number has continued to grow with new exotics discovered annually in the United States (HAACK, 2002; HAACK and POLAND, 2001; HAACK et al., 2002). One...

  14. Undergraduate Game Degree Programs in the United Kingdom and United States: A Comparison of the Curriculum Planning Process

    Science.gov (United States)

    McGill, Monica M.

    2010-01-01

    Digital games are marketed, mass-produced, and consumed by an increasing number of people and the game industry is only expected to grow. In response, post-secondary institutions in the United Kingdom (UK) and the United States (US) have started to create game degree programs. Though curriculum theorists provide insight into the process of…

  15. Research on Business Process Outsourcing | IDRC - International ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    The business process outsourcing (BPO) sector, worth over $130 billion ... Call for new OWSD Fellowships for Early Career Women Scientists now open ... Addressing Africa's unmet need for family planning by intensifying sexual and ...

  16. Developing and Managing University-Industry Research Collaborations through a Process Methodology/Industrial Sector Approach

    Science.gov (United States)

    Philbin, Simon P.

    2010-01-01

    A management framework has been successfully utilized at Imperial College London in the United Kingdom to improve the process for developing and managing university-industry research collaborations. The framework has been part of a systematic approach to increase the level of research contracts from industrial sources, to strengthen the…

  17. Current research issues related to post-wildfire runoff and erosion processes

    Science.gov (United States)

    John A. Moody; Richard A. Shakesby; Peter R. Robichaud; Susan H. Cannon; Deborah A. Martin

    2013-01-01

    Research into post-wildfire effects began in the United Statesmore than 70 years ago and only later extended to other parts of the world. Post-wildfire responses are typically transient, episodic, variable in space and time, dependent on thresholds, and involve multiple processes measured by different methods. These characteristics tend to hinder research progress, but...

  18. FCS Undergrads at Mississippi State Learn Research Process

    Science.gov (United States)

    Worthy, Sheri L.

    2009-01-01

    Understanding the research process is a vital part of the undergraduate experience. Conducting research helps students see the value of the scientific process and various research methods, and encourages inquisitiveness about family and consumer sciences (FCS) issues. Research experiences augment students' professional development, increase their…

  19. The Best Practice Unit: a model for learning, research and development

    Directory of Open Access Journals (Sweden)

    Jean Pierre Wilken

    2013-06-01

    Full Text Available The Best Practice Unit: a model for learning, research and development The Best Practice Unit (BPU model constitutes a unique form of practice-based research. A variant of the Community of Practice model developed by Wenger, McDermott and Snyder (2002, the BPU has the specific aim of improving professional practice by combining innovation and research. The model is used as a way of working by a group of professionals, researchers and other relevant individuals, who over a period of one to two years, work together towards a desired improvement. The model is characterized by interaction between individual and collective learning processes, the development of new or improved working methods, and the implementation of these methods in daily practice. Multiple knowledge resources are used, including experiential knowledge, professional knowledge and scientific knowledge. The research serves diverse purposes: articulating tacit knowledge, documenting learning and innovation processes, systematically describing the working methods that have been revealed or developed, and evaluating the efficacy of the new methods. Each BPU is supported by a facilitator, whose main task is to optimize learning processes. An analysis of ten different BPUs in different professional fields shows that this is a successful model. The article describes the methodology and results of this study. De Best Practice Unit: een model voor leren, onderzoek en ontwikkeling Het model van de Best Practice Unit (BPU is een unieke vorm van praktijkgericht onderzoek. De Best Practice Unit is een variant van de Community of Practice zoals ontwikkeld door Wenger, McDermott en Snyder (2002 met als specifiek doel om de professionele praktijk te verbeteren door innovatie en onderzoek te combineren. Het model wordt gebruikt om in een periode van 1-2 jaar met een groep professionals, onderzoekers en andere betrokkenen te werken aan een gewenste verbetering. Kenmerkend is de wisselwerking tussen

  20. Research on Key Technologies of Unit-Based CNC Machine Tool Assembly Design

    Directory of Open Access Journals (Sweden)

    Zhongqi Sheng

    2014-01-01

    Full Text Available Assembly is the part that produces the maximum workload and consumed time during product design and manufacturing process. CNC machine tool is the key basic equipment in manufacturing industry and research on assembly design technologies of CNC machine tool has theoretical significance and practical value. This study established a simplified ASRG for CNC machine tool. The connection between parts, semantic information of transmission, and geometric constraint information were quantified to assembly connection strength to depict the assembling difficulty level. The transmissibility based on trust relationship was applied on the assembly connection strength. Assembly unit partition based on assembly connection strength was conducted, and interferential assembly units were identified and revised. The assembly sequence planning and optimization of parts in each assembly unit and between assembly units was conducted using genetic algorithm. With certain type of high speed CNC turning center, as an example, this paper explored into the assembly modeling, assembly unit partition, and assembly sequence planning and optimization and realized the optimized assembly sequence of headstock of CNC machine tool.

  1. 32 CFR 516.10 - Service of civil process within the United States.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 3 2010-07-01 2010-07-01 true Service of civil process within the United States... CIVIL AUTHORITIES AND PUBLIC RELATIONS LITIGATION Service of Process § 516.10 Service of civil process within the United States. (a) Policy. DA officials will not prevent or evade the service or process in...

  2. 40 CFR 63.765 - Glycol dehydration unit process vent standards.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 10 2010-07-01 2010-07-01 false Glycol dehydration unit process vent... Facilities § 63.765 Glycol dehydration unit process vent standards. (a) This section applies to each glycol dehydration unit subject to this subpart with an actual annual average natural gas flowrate equal to or...

  3. 40 CFR 63.1275 - Glycol dehydration unit process vent standards.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 11 2010-07-01 2010-07-01 true Glycol dehydration unit process vent... Facilities § 63.1275 Glycol dehydration unit process vent standards. (a) This section applies to each glycol dehydration unit subject to this subpart with an actual annual average natural gas flowrate equal to or...

  4. Advances in process research by radionuclide techniques

    International Nuclear Information System (INIS)

    Merz, A.; Vogg, H.

    1978-01-01

    Modifications and transformations of materials and their technical implementation in process systems require movement of materials. Radionuclide techniques can greatly help in understanding and describing these mechanisms. The specialized measuring technique is demonstrated by three examples selected from various fields of process technology. Radioactive tracer studies performed on a rotary kiln helped, inter alia, to establish a subdivision into process zones and to pinpoint areas of dust generation. Mixing and feeding actions were studied in a twin screw extruder equipped with a special screw and mixer disk arrangement. Tracer experiments conducted in two secondary settling basins indicate the differences in the mechanisms of movement of the aqueous phase if the mean residence time and the residence time distribution may be influenced not only by hydraulic loads, but also by design variants of the overflow flumes. (orig./HP) [de

  5. Process Research ON Semix Silicon Materials (PROSSM)

    Science.gov (United States)

    Wohlgemuth, J. H.; Warfield, D. B.

    1982-01-01

    A cost effective process sequence was identified, equipment was designed to implement a 6.6 MW per year automated production line, and a cost analysis projected a $0.56 per watt cell add-on cost for this line. Four process steps were developed for this program: glass beads back clean-up, hot spray antireflective coating, wave soldering of fronts, and ion milling for edging. While spray dopants were advertised as an off the shelf developed product, they were unreliable with shorter than advertised shelf life.

  6. Low power signal processing research at Stanford

    Science.gov (United States)

    Burr, J.; Williamson, P. R.; Peterson, A.

    1991-01-01

    This paper gives an overview of the research being conducted at Stanford University's Space, Telecommunications, and Radioscience Laboratory in the area of low energy computation. It discusses the work we are doing in large scale digital VLSI neural networks, interleaved processor and pipelined memory architectures, energy estimation and optimization, multichip module packaging, and low voltage digital logic.

  7. Process Research on Polycrystalline Silicon Material (PROPSM)

    Science.gov (United States)

    Culik, J. S.; Wrigley, C. Y.

    1985-01-01

    Results of hydrogen-passivated polycrysalline silicon solar cell research are summarized. The short-circuit current of solar cells fabricated from large-grain cast polycrystalline silicon is nearly equivalent to that of single-crystal cells, which indicates long bulk minority-carrier diffusion length. Treatments with molecular hydrogen showed no effect on large-grain cast polycrystalline silicon solar cells.

  8. Design of the Laboratory-Scale Plutonium Oxide Processing Unit in the Radiochemical Processing Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Lumetta, Gregg J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Meier, David E. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Tingey, Joel M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Casella, Amanda J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Delegard, Calvin H. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Edwards, Matthew K. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Orton, Robert D. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Rapko, Brian M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Smart, John E. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2015-05-01

    This report describes a design for a laboratory-scale capability to produce plutonium oxide (PuO2) for use in identifying and validating nuclear forensics signatures associated with plutonium production, as well as for use as exercise and reference materials. This capability will be located in the Radiochemical Processing Laboratory at the Pacific Northwest National Laboratory. The key unit operations are described, including PuO2 dissolution, purification of the Pu by ion exchange, precipitation, and re-conversion to PuO2 by calcination.

  9. Process Systems Engineering Education: Learning by Research

    Science.gov (United States)

    Abbas, A.; Alhammadi, H. Y.; Romagnoli, J. A.

    2009-01-01

    In this paper, we discuss our approach in teaching the final-year course Process Systems Engineering. Students are given ownership of the course by transferring to them the responsibility of learning. A project-based group environment stimulates learning while solving a real engineering problem. We discuss postgraduate student involvement and how…

  10. Deriving social relations among organizational units from process models

    NARCIS (Netherlands)

    Song, M.S.; Choi, I.; Kim, K.M.; Aalst, van der W.M.P.

    2008-01-01

    For companies to sustain competitive advantages, it is required to redesign and improve business processes continuously by monitoring and analyzing process enactment results. Furthermore, organizational structures must be redesigned according to the changes in business processes. However, there are

  11. Process modeling of a HLA research lab

    Science.gov (United States)

    Ribeiro, Bruna G. C.; Sena, Alexandre C.; Silva, Dilson; Marzulo, Leandro A. J.

    2017-11-01

    Bioinformatics has provided tremendous breakthroughs in the field of molecular biology. All this evolution has generated a large volume of biological data that increasingly require the use of computing for analysis and storage of this information. The identification of the human leukocyte antigen (HLA) genotypes is critical to the success of organ transplants in humans. HLA typing involves not only laboratory tests but also DNA sequencing, with the participation of several professionals responsible for different stages of the process. Thus, the objective of this paper is to map the main steps in HLA typing in a laboratory specialized in performing such procedures, analyzing each process and proposing solutions to speed up the these steps, avoiding mistakes.

  12. EVALUATION OF THE LEARNING SYSTEM BASED ON RESEARCH (SABI IN THE CICS UMA IPN BIOCHEMISTRY UNIT

    Directory of Open Access Journals (Sweden)

    Blanca Elisa Pérez-Magaña

    2014-07-01

    Full Text Available Learning is a steward, permanent, and participatory process where: the apprentice, teacher, classmates, institution and other social factors where the student performs. As detonator of learning is research, which is made from real events that are addressed on the basis of the scientific development of the State of the art. One of the key elements in the professional training of students is the method that is used. Research-based learning system is an educational innovation (SABI, which was used in the learning of basic sciences of the Cardiovascular apparatus in generations unit 33rd, 34th, 35th, 36th and 37th generations in the years of 2008 to 2012's career in medicine and as a result was a decrease in the number of students reproachedimproving achievement. This method is an excellent alternative in the teaching-learning process and can be used both in groups with a variable number of students.

  13. Simulation of operational processes in hospital emergency units as lean healthcare tool

    Directory of Open Access Journals (Sweden)

    Andreia Macedo Gomes

    2017-07-01

    Full Text Available Recently, the Lean philosophy is gaining importance due to a competitive environment, which increases the need to reduce costs. Lean practices and tools have been applied to manufacturing, services, supply chain, startups and, the next frontier is healthcare. Most lean techniques can be easily adapted to health organizations. Therefore, this paper intends to summarize Lean practices and tools that are already being applied in health organizations. Among the numerous techniques and lean tools used, this research highlights the Simulation. Therefore, in order to understand the use of Simulation as a Lean Healthcare tool, this research aims to analyze, through the simulation technique, the operational dynamics of the service process of a fictitious hospital emergency unit. Initially a systematic review of the literature on the practices and tools of Lean Healthcare was carried out, in order to identify the main techniques practiced. The research highlighted Simulation as the sixth most cited tool in the literature. Subsequently, a simulation of a service model of an emergency unit was performed through the Arena software. As a main result, it can be highlighted that the attendants of the built model presented a degree of idleness, thus, they are able to atend a greater demand. As a last conclusion, it was verified that the emergency room is the process with longer service time and greater overload.

  14. Reproducibility of Mammography Units, Film Processing and Quality Imaging

    International Nuclear Information System (INIS)

    Gaona, Enrique

    2003-01-01

    The purpose of this study was to carry out an exploratory survey of the problems of quality control in mammography and processors units as a diagnosis of the current situation of mammography facilities. Measurements of reproducibility, optical density, optical difference and gamma index are included. Breast cancer is the most frequently diagnosed cancer and is the second leading cause of cancer death among women in the Mexican Republic. Mammography is a radiographic examination specially designed for detecting breast pathology. We found that the problems of reproducibility of AEC are smaller than the problems of processors units because almost all processors fall outside of the acceptable variation limits and they can affect the mammography quality image and the dose to breast. Only four mammography units agree with the minimum score established by ACR and FDA for the phantom image

  15. 42 CFR 93.316 - Completing the research misconduct process.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 1 2010-10-01 2010-10-01 false Completing the research misconduct process. 93.316... POLICIES ON RESEARCH MISCONDUCT Responsibilities of Institutions The Institutional Investigation § 93.316 Completing the research misconduct process. (a) ORI expects institutions to carry inquiries and...

  16. The Process of Divorce Recovery: A Review of the Research.

    Science.gov (United States)

    Gastil, Richard W.

    Many researchers have speculated over the nature of the divorce recovery process. Is the process similar to Kubler-Ross's stages of grief or does divorce recovery follow a unique process? This paper examines the current body of empirical research in an attempt to answer these questions. From the 91 sources analyzed, it was discovered that most of…

  17. Co-occurrence of Photochemical and Microbiological Transformation Processes in Open-Water Unit Process Wetlands.

    Science.gov (United States)

    Prasse, Carsten; Wenk, Jannis; Jasper, Justin T; Ternes, Thomas A; Sedlak, David L

    2015-12-15

    The fate of anthropogenic trace organic contaminants in surface waters can be complex due to the occurrence of multiple parallel and consecutive transformation processes. In this study, the removal of five antiviral drugs (abacavir, acyclovir, emtricitabine, lamivudine and zidovudine) via both bio- and phototransformation processes, was investigated in laboratory microcosm experiments simulating an open-water unit process wetland receiving municipal wastewater effluent. Phototransformation was the main removal mechanism for abacavir, zidovudine, and emtricitabine, with half-lives (t1/2,photo) in wetland water of 1.6, 7.6, and 25 h, respectively. In contrast, removal of acyclovir and lamivudine was mainly attributable to slower microbial processes (t1/2,bio = 74 and 120 h, respectively). Identification of transformation products revealed that bio- and phototransformation reactions took place at different moieties. For abacavir and zidovudine, rapid transformation was attributable to high reactivity of the cyclopropylamine and azido moieties, respectively. Despite substantial differences in kinetics of different antiviral drugs, biotransformation reactions mainly involved oxidation of hydroxyl groups to the corresponding carboxylic acids. Phototransformation rates of parent antiviral drugs and their biotransformation products were similar, indicating that prior exposure to microorganisms (e.g., in a wastewater treatment plant or a vegetated wetland) would not affect the rate of transformation of the part of the molecule susceptible to phototransformation. However, phototransformation strongly affected the rates of biotransformation of the hydroxyl groups, which in some cases resulted in greater persistence of phototransformation products.

  18. Usability of computerized nursing process from the ICNP® in intensive care units

    Directory of Open Access Journals (Sweden)

    Daniela Couto Carvalho Barra

    2015-04-01

    Full Text Available OBJECTIVE To analyze the usability of Computerized Nursing Process (CNP from the ICNP® 1.0 in Intensive Care Units in accordance with the criteria established by the standards of the International Organization for Standardization and the Brazilian Association of Technical Standards of systems. METHOD This is a before-and-after semi-experimental quantitative study, with a sample of 34 participants (nurses, professors and systems programmers, carried out in three Intensive Care Units. RESULTS The evaluated criteria (use, content and interface showed that CNP has usability criteria, as it integrates a logical data structure, clinical assessment, diagnostics and nursing interventions. CONCLUSION The CNP is a source of information and knowledge that provide nurses with new ways of learning in intensive care, for it is a place that provides complete, comprehensive, and detailed content, supported by current and relevant data and scientific research information for Nursing practices.

  19. 32 CFR 516.9 - Service of criminal process within the United States.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 3 2010-07-01 2010-07-01 true Service of criminal process within the United... OF CIVIL AUTHORITIES AND PUBLIC RELATIONS LITIGATION Service of Process § 516.9 Service of criminal process within the United States. (a) Surrender of personnel. Guidance for surrender of military personnel...

  20. Reactor aging research. United States Nuclear Regulatory Commission

    International Nuclear Information System (INIS)

    Vassilaros, M.G.

    1998-01-01

    The reactor ageing research activities in USA described, are focused on the research of reactor vessel integrity, including regulatory issues and technical aspects. Current emphasis are described for fracture analysis, embrittlement research, inspection capabilities, validation od annealing rule, revision of regulatory guide

  1. Research Note Topographical units and soil types prove more ...

    African Journals Online (AJOL)

    The floristic data (species presence at each site) were grouped into Land Types, topographical units and broad soil types. Each group was analysed independently using multivariate detrended correspondence analysis (DCA) and the mean similarity test. The floristic data in each Land Type showed a 42% range of ...

  2. Effect of energetic dissipation processes on the friction unit tribological

    Directory of Open Access Journals (Sweden)

    Moving V. V.

    2007-01-01

    Full Text Available In article presented temperature influence on reological and fric-tion unit coefficients cast iron elements. It has been found that surface layer formed in the temperature friction has good rub off resistance. The surface layer structural hardening and capacity stress relaxation make up.

  3. Processing United Nations Documents in the University of Michigan Library.

    Science.gov (United States)

    Stolper, Gertrude

    This guide provides detailed instructions for recording documents in the United Nations (UN) card catalog which provides access to the UN depository collection in the Harlan Hatcher Graduate Library at the University of Michigan. Procedures for handling documents when they are received include stamping, counting, and sorting into five categories:…

  4. Computational fluid dynamics research at the United Technologies Research Center requiring supercomputers

    Science.gov (United States)

    Landgrebe, Anton J.

    1987-01-01

    An overview of research activities at the United Technologies Research Center (UTRC) in the area of Computational Fluid Dynamics (CFD) is presented. The requirement and use of various levels of computers, including supercomputers, for the CFD activities is described. Examples of CFD directed toward applications to helicopters, turbomachinery, heat exchangers, and the National Aerospace Plane are included. Helicopter rotor codes for the prediction of rotor and fuselage flow fields and airloads were developed with emphasis on rotor wake modeling. Airflow and airload predictions and comparisons with experimental data are presented. Examples are presented of recent parabolized Navier-Stokes and full Navier-Stokes solutions for hypersonic shock-wave/boundary layer interaction, and hydrogen/air supersonic combustion. In addition, other examples of CFD efforts in turbomachinery Navier-Stokes methodology and separated flow modeling are presented. A brief discussion of the 3-tier scientific computing environment is also presented, in which the researcher has access to workstations, mid-size computers, and supercomputers.

  5. User guide : process for quantifying the benefits of research.

    Science.gov (United States)

    2017-07-01

    The Minnesota Department of Transportation Research Services has adopted a process for quantifying the monetary benefits of research projects, such as the dollar value of particular ideas when implemented across the states transportation system. T...

  6. FFUSION yearbook 1995. Annual report of the Finnish research unit. Association EURATOM-TEKES

    Energy Technology Data Exchange (ETDEWEB)

    Karttunen, S; Paettikangas, T [eds.; VTT Energy, Espoo (Finland)

    1996-03-01

    Finnish Fusion Research Programme (FFUSION) is one of the eleven national energy research programmes funded by the Technological Development Centre of Finland (TEKES). All fusion related research in Finland is included in the FFUSION programme and it made it possible to establish a dialogue with the European Fusion Programme already two years before Finland joined the European Union. The process led to the founding of the Association Euratom-TEKES in early 1995. The contract of Association was signed in Helsinki on March 13 1995, to establish the 14th Association in the EU FFusion Programme. This annual report summarises the research activities of the Finnish Research Unit in 1995. The emphasis is on research supported by the EU Commission. The programme consists of two parts: Physics and Technology. The research areas of the physics are: Fusion plasma engineering, Radio-frequency heating and plasma diagnostics, and Plasma-wall interactions - ion-beam studies of the reactor materials. The technology is focused into three areas: Fusion reactor materials (first wall components and joining techniques), and Remote handling

  7. Using Systems Theory to Examine Patient and Nurse Structures, Processes, and Outcomes in Centralized and Decentralized Units.

    Science.gov (United States)

    Real, Kevin; Fay, Lindsey; Isaacs, Kathy; Carll-White, Allison; Schadler, Aric

    2018-01-01

    This study utilizes systems theory to understand how changes to physical design structures impact communication processes and patient and staff design-related outcomes. Many scholars and researchers have noted the importance of communication and teamwork for patient care quality. Few studies have examined changes to nursing station design within a systems theory framework. This study employed a multimethod, before-and-after, quasi-experimental research design. Nurses completed surveys in centralized units and later in decentralized units ( N = 26 pre , N = 51 post ). Patients completed surveys ( N = 62 pre ) in centralized units and later in decentralized units ( N = 49 post ). Surveys included quantitative measures and qualitative open-ended responses. Patients preferred the decentralized units because of larger single-occupancy rooms, greater privacy/confidentiality, and overall satisfaction with design. Nurses had a more complex response. Nurses approved the patient rooms, unit environment, and noise levels in decentralized units. However, they reported reduced access to support spaces, lower levels of team/mentoring communication, and less satisfaction with design than in centralized units. Qualitative findings supported these results. Nurses were more positive about centralized units and patients were more positive toward decentralized units. The results of this study suggest a need to understand how system components operate in concert. A major contribution of this study is the inclusion of patient satisfaction with design, an important yet overlooked fact in patient satisfaction. Healthcare design researchers and practitioners may consider how changing system interdependencies can lead to unexpected changes to communication processes and system outcomes in complex systems.

  8. On the hazard rate process for imperfectly monitored multi-unit systems

    International Nuclear Information System (INIS)

    Barros, A.; Berenguer, C.; Grall, A.

    2005-01-01

    The aim of this paper is to present a stochastic model to characterize the failure distribution of multi-unit systems when the current units state is imperfectly monitored. The definition of the hazard rate process existing with perfect monitoring is extended to the realistic case where the units failure time are not always detected (non-detection events). The so defined observed hazard rate process gives a better representation of the system behavior than the classical failure rate calculated without any information on the units state and than the hazard rate process based on perfect monitoring information. The quality of this representation is, however, conditioned by the monotony property of the process. This problem is mainly discussed and illustrated on a practical example (two parallel units). The results obtained motivate the use of the observed hazard rate process to characterize the stochastic behavior of the multi-unit systems and to optimize for example preventive maintenance policies

  9. On the hazard rate process for imperfectly monitored multi-unit systems

    Energy Technology Data Exchange (ETDEWEB)

    Barros, A. [Institut des Sciences et Techonologies de l' Information de Troyes (ISTIT-CNRS), Equipe de Modelisation et Surete des Systemes, Universite de Technologie de Troyes (UTT), 12, rue Marie Curie, BP2060, 10010 Troyes cedex (France)]. E-mail: anne.barros@utt.fr; Berenguer, C. [Institut des Sciences et Techonologies de l' Information de Troyes (ISTIT-CNRS), Equipe de Modelisation et Surete des Systemes, Universite de Technologie de Troyes (UTT), 12, rue Marie Curie, BP2060, 10010 Troyes cedex (France); Grall, A. [Institut des Sciences et Techonologies de l' Information de Troyes (ISTIT-CNRS), Equipe de Modelisation et Surete des Systemes, Universite de Technologie de Troyes (UTT), 12, rue Marie Curie, BP2060, 10010 Troyes cedex (France)

    2005-12-01

    The aim of this paper is to present a stochastic model to characterize the failure distribution of multi-unit systems when the current units state is imperfectly monitored. The definition of the hazard rate process existing with perfect monitoring is extended to the realistic case where the units failure time are not always detected (non-detection events). The so defined observed hazard rate process gives a better representation of the system behavior than the classical failure rate calculated without any information on the units state and than the hazard rate process based on perfect monitoring information. The quality of this representation is, however, conditioned by the monotony property of the process. This problem is mainly discussed and illustrated on a practical example (two parallel units). The results obtained motivate the use of the observed hazard rate process to characterize the stochastic behavior of the multi-unit systems and to optimize for example preventive maintenance policies.

  10. "Intelligent" tools for workflow process redesign : a research agenda

    NARCIS (Netherlands)

    Netjes, M.; Vanderfeesten, I.T.P.; Reijers, H.A.; Bussler, C.; Haller, A.

    2006-01-01

    Although much attention is being paid to business processes during the past decades, the design of business processes and particularly workflow processes is still more art than science. In this workshop paper, we present our view on modeling methods for workflow processes and introduce our research

  11. Tribal wilderness research needs and issues in the United States and Canada

    Science.gov (United States)

    Dan McDonald; Tom McDonald; Leo H. McAvoy

    2000-01-01

    This paper represents a dialogue between tribal wilderness managers and researchers on the primary research needs of tribal wilderness in the United States and Canada. The authors identify a number of research priorities for tribal wildlands. The paper also discusses some major issues and challenges faced by researchers conducting research in areas that are culturally...

  12. Control system design specification of advanced spent fuel management process units

    Energy Technology Data Exchange (ETDEWEB)

    Ahn, S. H.; Kim, S. H.; Yoon, J. S

    2003-06-01

    In this study, the design specifications of instrumentation and control system for advanced spent fuel management process units are presented. The advanced spent fuel management process consists of several process units such as slitting device, dry pulverizing/mixing device, metallizer, etc. In this study, the control and operation characteristics of the advanced spent fuel management mockup process devices and the process devices developed in 2001 and 2002 are analysed. Also, a integral processing system of the unit process control signals is proposed, which the operation efficiency is improved. And a redundant PLC control system is constructed which the reliability is improved. A control scheme is proposed for the time delayed systems compensating the control performance degradation caused by time delay. The control system design specification is presented for the advanced spent fuel management process units. This design specifications can be effectively used for the detail design of the advanced spent fuel management process.

  13. Key considerations for the success of Medical Education Research and Innovation units in Canada: unit director perceptions.

    Science.gov (United States)

    Varpio, Lara; Bidlake, Erin; Humphrey-Murto, Sue; Sutherland, Stephanie; Hamstra, Stanley J

    2014-08-01

    Growth in the field of medical education is evidenced by the proliferation of units dedicated to advancing Medical Education Research and Innovation (MERI). While a review of the literature discovered narrative accounts of MERI unit development, we found no systematic examinations of the dimensions of and structures that facilitate the success of these units. We conducted qualitative interviews with the directors of 12 MERI units across Canada. Data were analyzed using qualitative description (Sandelowski in Res Nurs Health 23:334-340, 2000). Final analysis drew on Bourdieu's (Outline of a theory of practice. Cambridge University Press, Cambridge, 1977; Media, culture and society: a critical reader. Sage, London, 1986; Language and symbolic power. Harvard University Press, Cambridge, 1991) concepts of field, habitus, and capital, and more recent research investigating the field of MERI (Albert in Acad Med 79:948-954, 2004; Albert et al. in Adv Health Sci Educ 12:103-115, 2007). When asked about the metrics by which they define their success, directors cited: teaching, faculty mentoring, building collaborations, delivering conference presentations, winning grant funding, and disseminating publications. Analyzed using Bourdieu's concepts, these metrics are discussed as forms of capital that have been legitimized in the MERI field. All directors, with the exception of one, described success as being comprised of elements (capital) at both ends of the service-research spectrum (i.e., Albert's PP-PU structure). Our analysis highlights the forms of habitus (i.e., behaviors, attitudes, demeanors) directors use to negotiate, strategize and position the unit within their local context. These findings may assist institutions in developing a new-or reorganizing an existing-MERI unit. We posit that a better understanding of these complex social structures can help units become savvy participants in the MERI field. With such insight, units can improve their academic output and

  14. A Ten-Step Process for Developing Teaching Units

    Science.gov (United States)

    Butler, Geoffrey; Heslup, Simon; Kurth, Lara

    2015-01-01

    Curriculum design and implementation can be a daunting process. Questions quickly arise, such as who is qualified to design the curriculum and how do these people begin the design process. According to Graves (2008), in many contexts the design of the curriculum and the implementation of the curricular product are considered to be two mutually…

  15. Exploring the decision-making process in the delivery of physiotherapy in a stroke unit.

    Science.gov (United States)

    McGlinchey, Mark P; Davenport, Sally

    2015-01-01

    The aim of this study was to explore the decision-making process in the delivery of physiotherapy in a stroke unit. A focused ethnographical approach involving semi-structured interviews and observations of clinical practice was used. A purposive sample of seven neurophysiotherapists and four patients participated in semi-structured interviews. From this group, three neurophysiotherapists and four patients were involved in observation of practice. Data from interviews and observations were analysed to generate themes. Three themes were identified: planning the ideal physiotherapy delivery, the reality of physiotherapy delivery and involvement in the decision-making process. Physiotherapists used a variety of clinical reasoning strategies and considered many factors to influence their decision-making in the planning and delivery of physiotherapy post-stroke. These factors included the therapist's clinical experience, patient's presentation and response to therapy, prioritisation, organisational constraints and compliance with organisational practice. All physiotherapists highlighted the importance to involve patients in planning and delivering their physiotherapy. However, there were varying levels of patient involvement observed in this process. The study has generated insight into the reality of decision-making in the planning and delivery of physiotherapy post-stroke. Further research involving other stroke units is required to gain a greater understanding of this aspect of physiotherapy. Implications for Rehabilitation Physiotherapists need to consider multiple patient, therapist and organisational factors when planning and delivering physiotherapy in a stroke unit. Physiotherapists should continually reflect upon how they provide physiotherapy, with respect to the duration, frequency and time of day sessions are delivered, in order to guide current and future physiotherapy delivery. As patients may demonstrate varying levels of participation in deciding and

  16. The research of high voltage switchgear detecting unit

    Science.gov (United States)

    Ji, Tong; Xie, Wei; Wang, Xiaoqing; Zhang, Jinbo

    2017-07-01

    In order to understand the status of the high voltage switch in the whole life circle, you must monitor the mechanical and electrical parameters that affect device health. So this paper gives a new high voltage switchgear detecting unit based on ARM technology. It can measure closing-opening mechanical wave, storage motor current wave and contactor temperature to judge the device’s health status. When something goes wrong, it can be on alert and give some advice. The practice showed that it can meet the requirements of circuit breaker mechanical properties temperature online detection.

  17. Nuclear safety inspection in treatment process for SG heat exchange tubes deficiency of unit 1, TNPS

    International Nuclear Information System (INIS)

    Zhang Chunming; Song Chenxiu; Zhao Pengyu; Hou Wei

    2006-01-01

    This paper describes treatment process for SG heat exchange tubes deficiency of Unit 1, TNPS, nuclear safety inspection of Northern Regional Office during treatment process for deficiency and further inspection after deficiency had been treated. (authors)

  18. The United States Advanced Reactor Technologies Research and Development Program

    International Nuclear Information System (INIS)

    O’Connor, Thomas J.

    2014-01-01

    The following aspects are addressed: • Nuclear energy mission; • Reactor research development and deployment (RD&D) programs: - Light Water Reactor Sustainability Program; - Small Modular Reactor Licensing Technical Support; - Advanced Reactor Technologies (ART)

  19. Application of ion-exchange unit in uranium extraction process in China (to be continued)

    International Nuclear Information System (INIS)

    Gong Chuanwen

    2004-01-01

    The application conditions of five different ion exchange units in uranium milling plant and wastewater treatment plant of uranium mine in China are introduced, including working parameters, existing problems and improvements. The advantages and disadvantages of these units are reviewed briefly. The procedure points to be followed in selecting ion exchange unit are recommended in the engineering design. The primary views are presented upon the application prospects of some ion exchange units in uranium extraction process in China

  20. Classification of hyperspectral imagery using MapReduce on a NVIDIA graphics processing unit (Conference Presentation)

    Science.gov (United States)

    Ramirez, Andres; Rahnemoonfar, Maryam

    2017-04-01

    A hyperspectral image provides multidimensional figure rich in data consisting of hundreds of spectral dimensions. Analyzing the spectral and spatial information of such image with linear and non-linear algorithms will result in high computational time. In order to overcome this problem, this research presents a system using a MapReduce-Graphics Processing Unit (GPU) model that can help analyzing a hyperspectral image through the usage of parallel hardware and a parallel programming model, which will be simpler to handle compared to other low-level parallel programming models. Additionally, Hadoop was used as an open-source version of the MapReduce parallel programming model. This research compared classification accuracy results and timing results between the Hadoop and GPU system and tested it against the following test cases: the CPU and GPU test case, a CPU test case and a test case where no dimensional reduction was applied.

  1. Market research of window units and doors industry in Russia

    OpenAIRE

    Grishankova, Elena

    2010-01-01

    The purpose of this research is to analyze macro-environmental and competitive forces in the Russian market and to determine possible entry modes for a new company. Some practical information on legal issues and regulatory organizations is also included in the paper in order to create a comprehensive overview of any potentially influential factors. The conceptual framework is based on the macro-environmental market research approach, Michael Porter’s five forces framework and internationa...

  2. Optimized mobile retroreflectivity unit data processing algorithms : [project summary].

    Science.gov (United States)

    2017-06-01

    Researchers examined both hardware and : software components of the MRU to determine : where improvements could be made. The MRUs laser makes one-meter sweeps, which : detect retroreflective striping and measure its reflectivity. The MRU also dete...

  3. Uniting Resilience Research and Practice With an Inequalities Approach

    Directory of Open Access Journals (Sweden)

    Angie Hart

    2016-12-01

    Full Text Available The concept of resilience has evolved, from an individual-level characteristic to a wider ecological notion that takes into account broader person–environment interactions, generating an increased interest in health and well-being research, practice and policy. At the same time, the research and policy-based attempts to build resilience are increasingly under attack for responsibilizing individuals and maintaining, rather than challenging, the inequitable structure of society. When adversities faced by children and young people result from embedded inequality and social disadvantage, resilience-based knowledge has the potential to influence the wider adversity context. Therefore, it is vital that conceptualizations of resilience encompass this potential for marginalized people to challenge and transform aspects of their adversity, without holding them responsible for the barriers they face. This article outlines and provides examples from an approach that we are taking in our research and practice, which we have called Boingboing resilience. We argue that it is possible to bring resilience research and practice together with a social justice approach, giving equal and simultaneous attention to individuals and to the wider system. To achieve this goal, we suggest future research should have a co-produced and inclusive research design that overcomes the dilemma of agency and responsibility, contains a socially transformative element, and has the potential to empower children, young people, and families.

  4. United States Military Retirement Migration: Patterns and Processes.

    Science.gov (United States)

    1984-03-27

    active duty force e) Number of heating degree days tA 23 f) Number of physicians per 1000 population g) Recreation acres per 1000 population h...Eva Mueller. 1967. The Geographic Mobility of Labor. Ann Arbor : University of Michigan. Institute for Social Research, Survey Research Center. Law, C.M... Chicken or Egg?. Southern Economic Journal. 37:295-306. Muth, J.F. 1961. Rational Expectations and the Theory of Price Movements. Econometrics. 29:315

  5. A data processing unit (DPU) for a satellite-borne charge composition experiment

    International Nuclear Information System (INIS)

    Koga, R.; Blake, J.B.; Chenette, D.L.; Fennell, J.F.; Imamoto, S.S.; Katz, N.; King, C.G.

    1985-01-01

    A data processing unit (DPU) for use with a charge composition experiment to be flown aboard the VIKING auroral research satellite is described. The function of this experiment is to measure the mass, charge state, energy, and pitch-angle distribution of ions in the earth's high-altitude magnetosphere in the energy range from 50 keV/q to 300 keV/q. In order to be compatible with the spacecraft telemetry limitations, raw sensor data are processed in the DPU using on-board composition analysis and the scalar compression. The design of this DPU is such that it can be readily adapted to a variety of space composition experiments. Special attention was given to the effect of the radiation environment on orbit since a microprocessor and a relatively large number of random access memories (RAMs) comprise a considerable portion of the DPU

  6. United States Department of Energy Integrated Manufacturing & Processing Predoctoral Fellowships. Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Petrochenkov, M.

    2003-03-31

    The objective of the program was threefold: to create a pool of PhDs trained in the integrated approach to manufacturing and processing, to promote academic interest in the field, and to attract talented professionals to this challenging area of engineering. It was anticipated that the program would result in the creation of new manufacturing methods that would contribute to improved energy efficiency, to better utilization of scarce resources, and to less degradation of the environment. Emphasis in the competition was on integrated systems of manufacturing and the integration of product design with manufacturing processes. Research addressed such related areas as aspects of unit operations, tooling and equipment, intelligent sensors, and manufacturing systems as they related to product design.

  7. United Kingdom health research analyses and the benefits of shared data.

    Science.gov (United States)

    Carter, James G; Sherbon, Beverley J; Viney, Ian S

    2016-06-24

    To allow research organisations to co-ordinate activity to the benefit of national and international funding strategies requires assessment of the funding landscape; this, in turn, relies on a consistent approach for comparing expenditure on research. Here, we discuss the impact and benefits of the United Kingdom's Health Research Classification System (HRCS) in national landscaping analysis of health research and the pros and cons of performing large-scale funding analyses. The first United Kingdom health research analysis (2004/2005) brought together the 11 largest public and charity funders of health research to develop the HRCS and use this categorisation to examine United Kingdom health research. The analysis was revisited in 2009/2010 and again in 2014. The most recent quinquennial analysis in 2014 compiled data from 64 United Kingdom research organisations, accounting for 91% of all public/charitable health research funding in the United Kingdom. The three analyses summarise the United Kingdom's health research expenditure in 2004/2005, 2009/2010 and 2014, and can be used to identify changes in research activity and disease focus over this 10 year period. The 2004/2005 analysis provided a baseline for future reporting and evidence for a United Kingdom Government review that recommended the co-ordination of United Kingdom health research should be strengthened to accelerate the translation of basic research into clinical and economic benefits. Through the second and third analyses, we observed strategic prioritisation of certain health research activities and disease areas, with a strong trend toward increased funding for more translational research, and increases in specific areas such as research on prevention. The use of HRCS in the United Kingdom to analyse the research landscape has provided benefit both to individual participatory funders and in coordinating initiatives at a national level. A modest amount of data for each project is sufficient for a

  8. Therapeutic Process and Outcome: The Interplay of Research

    Science.gov (United States)

    Campbel, Holly

    2008-01-01

    From Freud through to modern times researchers have aimed to develop a clearer understanding of therapeutic processes and outcomes. Despite this continued interest in the field, the representation of psychotherapy processes and the applicability of research findings and recommendations to the therapeutic field continue to prove difficult.…

  9. Process models as tools in forestry research and management

    Science.gov (United States)

    Kurt Johnsen; Lisa Samuelson; Robert Teskey; Steve McNulty; Tom Fox

    2001-01-01

    Forest process models are mathematical representations of biological systems that incorporate our understanding of physiological and ecological mechanisms into predictive algorithms. These models were originally designed and used for research purposes, but are being developed for use in practical forest management. Process models designed for research...

  10. Using Vignette Methodology to research the process of breach comparatively

    NARCIS (Netherlands)

    Boone, M.M.; Beyens, K.; Maguire, N.; Laurinavicius, A.; Persson, A.

    2015-01-01

    Comparative research related to any aspect of the process of breach in either the pre-trial, sentencing or release phases is relatively rare. Comparative studies of decision making in the specific context of breach process are particularly lacking. One reason for the dearth of research in this area

  11. Standardization of the licensing process in the United States

    International Nuclear Information System (INIS)

    Villa, R.

    1986-01-01

    The paper discusses a major problem with the design review process for light water reactors. Major confusion exists over the design-basis requirements for a future nuclear power plant in the US. It is not at all clear how the conclusions of a severe accident review are to be integrated into the design approval process. The separation between a design-basis review and a severe accident review makes absolutely no sense if the severe accident review is to have an influence on the design. If an acceptable design is defined during the deterministic review, it is destructive to allow new design-basis requirements to appear during the probabilistic review. Clearly, the review process has too many undefined steps. It is believed that once all of the requirements are defined for a future design, and once the licensing process is exactly defined, the industry can begin a productive and successful standardization program

  12. Mapping Investments and Published Outputs in Norovirus Research: A Systematic Analysis of Research Funded in the United States and United Kingdom During 1997-2013.

    Science.gov (United States)

    Head, Michael G; Fitchett, Joseph R; Lichtman, Amos B; Soyode, Damilola T; Harris, Jennifer N; Atun, Rifat

    2016-02-01

    Norovirus accounts for a considerable portion of the global disease burden. Mapping national or international investments relating to norovirus research is limited. We analyzed the focus and type of norovirus research funding awarded to institutions in the United States and United Kingdom during 1997-2013. Data were obtained from key public and philanthropic funders across both countries, and norovirus-related research was identified from study titles and abstracts. Included studies were further categorized by the type of scientific investigation, and awards related to vaccine, diagnostic, and therapeutic research were identified. Norovirus publication trends are also described using data from Scopus. In total, US and United Kingdom funding investment for norovirus research was £97.6 million across 349 awards; 326 awards (amount, £84.9 million) were received by US institutions, and 23 awards (£12.6 million) were received by United Kingdom institutions. Combined, £81.2 million of the funding (83.2%) was for preclinical research, and £16.4 million (16.8%) was for translational science. Investments increased from £1.7 million in 1997 to £11.8 million in 2013. Publication trends showed a consistent temporal increase from 48 in 1997 to 182 in 2013. Despite increases over time, trends in US and United Kingdom funding for norovirus research clearly demonstrate insufficient translational research and limited investment in diagnostics, therapeutics, or vaccine research. © The Author 2016. Published by Oxford University Press for the Infectious Diseases Society of America. All rights reserved. For permissions, e-mail journals.permissions@oup.com.

  13. Thoughts about the research process. A proposal from decolonial feminism

    Directory of Open Access Journals (Sweden)

    Javiera Cubillos Almendra

    2014-12-01

    Full Text Available In this paper, I share some concerns and decisions arisen during my doctoral research process which seeks to integrate decolonial feminist theory as epistemic key for analysis on sexual and reproductive health public policy in Chile, between years 2000 and 2015, based on Coloniality of Gender concept proposed by Maria Lugones. Here I present the most significant aspects in the research process —including theoretical framework and methodological design— that led to the approach of my current research project.

  14. Process error rates in general research applications to the Human ...

    African Journals Online (AJOL)

    Objective. To examine process error rates in applications for ethics clearance of health research. Methods. Minutes of 586 general research applications made to a human health research ethics committee (HREC) from April 2008 to March 2009 were examined. Rates of approval were calculated and reasons for requiring ...

  15. Uncited Research Articles in Popular United States General Radiology Journals.

    Science.gov (United States)

    Rosenkrantz, Andrew B; Chung, Ryan; Duszak, Richard

    2018-05-03

    This study aimed to characterize articles in popular general radiology journals that go uncited for a decade after publication. Using the Web of Science database, we identified annual citation counts for 13,459 articles published in Radiology, American Journal of Roentgenology, and Academic Radiology between 1997 and 2006. From this article cohort, we then identified all original research articles that accrued zero citations within a decade of publication. A concurrent equal-sized cohort of most cited articles was created. Numerous characteristics of the uncited and most cited articles were identified and compared. Only 47 uncited articles went uncited for a decade after publication. When compared to the 47 most cited articles over that same window, the uncited articles were significantly (P articles, uncited articles also had significantly (P articles published in popular general radiology journals, only a very small number of original research investigations remained uncited a decade after publication. Given that citations reflect the impact of radiology research, this observation suggests that journals are appropriately selecting meaningful work. Investigators seeking to avoid futile publication might consider their research initiatives in light of these characteristics. Copyright © 2018 The Association of University Radiologists. Published by Elsevier Inc. All rights reserved.

  16. Toxic Hazards Research Unit Annual Technical Report: 1985

    Science.gov (United States)

    1985-09-01

    varnish makers’ and painters’ naphtha, Toxicol. Appl. Pharmacol., 32:263-281. Carpenter, C. P.. E. R. Kinkead, D. L. Geary, L. J. Sullivan, Jr., and J...and Pharmacology of Inorganic and Fluorine Contairnin Compounds, AMRL-TR-67-224, Aerospace Medical Research Laboiatory, Wright-Patterson Air Force Base

  17. Forest Service National Visitor Use Monitoring Process: Research Method Documentation

    Science.gov (United States)

    Donald B.K. English; Susan M. Kocis; Stanley J. Zarnoch; J. Ross Arnold

    2002-01-01

    In response to the need for improved information on recreational use of National Forest System lands, the authors have developed a nationwide, systematic monitoring process. This report documents the methods they used in estimating recreational use on an annual basis. The basic unit of measure is exiting volume of visitors from a recreation site on a given day. Sites...

  18. Climate Action Planning Process | Climate Neutral Research Campuses | NREL

    Science.gov (United States)

    Action Planning Process Climate Action Planning Process For research campuses, NREL has developed a five-step process to develop and implement climate action plans: Determine baseline energy consumption Analyze technology options Prepare a plan and set priorities Implement the climate action plan Measure and

  19. Recruiting bereaved parents for research after infant death in the neonatal intensive care unit.

    Science.gov (United States)

    Currie, Erin R; Roche, Cathy; Christian, Becky J; Bakitas, Marie; Meneses, Karen

    2016-11-01

    Understanding parental experiences following infant death in the neonatal intensive care unit (NICU) is a high research priority and a necessary first step to improving health services. However, recruiting bereaved parents to discuss their experiences on such an extremely sensitive topic can be challenging and research procedures must be planned carefully in order to get an adequate sample. There is little published in the literature detailing specific strategies for recruiting bereaved parents for grief research, especially strategies for contacting parents and identifying factors that might affect participation. The purpose of this paper is to describe the process of recruiting bereaved parents into a qualitative research study exploring parental NICU experiences and grief responses following infant death. We describe a successful recruitment plan that led to the enrollment of difficult to recruit participants such as fathers, and individuals representing minorities and those from lower socioeconomic (SES) groups. Bereaved parents of infants after an NICU hospitalization should continue to be recruited for research studies for their unique perspectives and valuable insights about the devastating experience of infant death. Participants in this study reported more benefits than harm and the results addressed a critical gap in the literature. Copyright © 2016 Elsevier Inc. All rights reserved.

  20. Option pricing with COS method on Graphics Processing Units

    NARCIS (Netherlands)

    B. Zhang (Bo); C.W. Oosterlee (Kees)

    2009-01-01

    htmlabstractIn this paper, acceleration on the GPU for option pricing by the COS method is demonstrated. In particular, both European and Bermudan options will be discussed in detail. For Bermudan options, we consider both the Black-Scholes model and Levy processes of infinite activity. Moreover,

  1. Toxic Hazards Research Unit Annual Technical Report: 1984

    Science.gov (United States)

    1984-09-01

    exposed to TOCP exhibited the classic lesions of delayed neuropathy (Smith and Lillie, 1931; Barnes and Denz, 1953; (avanagh, 1954; and Fenton , 1955...Safety of *.i Chemicals in Food, Drugs, and Cosmetics , The staff of the Divi- sion of Pharmacology of the Federal Food and Drug Administration, Austin...Annual Technical Report: 1967, AMRL-TR-67-137 (AD 834723), Aerospace Medical Research Laboratory, Wright-Patterson Air Force Base, Ohio. Fenton , J. C

  2. Wind Energy in the United States: Market and Research Update

    International Nuclear Information System (INIS)

    Goldman, P.R.; Thresher, R.W.; Hock, S.M.

    1999-01-01

    U.S. market activity has increased over the last two years. In 1998, new capacity totaled about 150 MW and projected 1999 capacity additions are over 600 MW. As the electricity market continues to evolve under restructuring, the U.S. Department of Energy (U.S. DOE) Wind Energy Program has positioned itself to work with industry to meet current challenges and opportunities, and prepare for the market of tomorrow. Some opportunities include green power markets and distributed applications, although a primary challenge involves the fact that avoided cost payments to renewable generators are not high enough to economically support projects. A recently incorporated power exchange in California, APX, Inc., has demonstrated that green power does attract a premium over prices on the conventional power exchange. The key elements of the U.S. DOE Wind Program are (1) Applied Research, which is critical for achieving advanced turbine designs capable of competing in a restructured market that emphasizes low cost generation; (2) Turbine Research, which supports the U.S. industry in developing competitive, high performance, reliable wind turbine technology for global energy markets; and (3) Cooperative Research and Testing, under which standards development and certification testing are the key activities for the current year

  3. Databases and coordinated research projects at the IAEA on atomic processes in plasmas

    Energy Technology Data Exchange (ETDEWEB)

    Braams, Bastiaan J.; Chung, Hyun-Kyung [Nuclear Data Section, NAPC Division, International Atomic Energy Agency P. O. Box 100, Vienna International Centre, AT-1400 Vienna (Austria)

    2012-05-25

    The Atomic and Molecular Data Unit at the IAEA works with a network of national data centres to encourage and coordinate production and dissemination of fundamental data for atomic, molecular and plasma-material interaction (A+M/PMI) processes that are relevant to the realization of fusion energy. The Unit maintains numerical and bibliographical databases and has started a Wiki-style knowledge base. The Unit also contributes to A+M database interface standards and provides a search engine that offers a common interface to multiple numerical A+M/PMI databases. Coordinated Research Projects (CRPs) bring together fusion energy researchers and atomic, molecular and surface physicists for joint work towards the development of new data and new methods. The databases and current CRPs on A+M/PMI processes are briefly described here.

  4. Databases and coordinated research projects at the IAEA on atomic processes in plasmas

    Science.gov (United States)

    Braams, Bastiaan J.; Chung, Hyun-Kyung

    2012-05-01

    The Atomic and Molecular Data Unit at the IAEA works with a network of national data centres to encourage and coordinate production and dissemination of fundamental data for atomic, molecular and plasma-material interaction (A+M/PMI) processes that are relevant to the realization of fusion energy. The Unit maintains numerical and bibliographical databases and has started a Wiki-style knowledge base. The Unit also contributes to A+M database interface standards and provides a search engine that offers a common interface to multiple numerical A+M/PMI databases. Coordinated Research Projects (CRPs) bring together fusion energy researchers and atomic, molecular and surface physicists for joint work towards the development of new data and new methods. The databases and current CRPs on A+M/PMI processes are briefly described here.

  5. Databases and coordinated research projects at the IAEA on atomic processes in plasmas

    International Nuclear Information System (INIS)

    Braams, Bastiaan J.; Chung, Hyun-Kyung

    2012-01-01

    The Atomic and Molecular Data Unit at the IAEA works with a network of national data centres to encourage and coordinate production and dissemination of fundamental data for atomic, molecular and plasma-material interaction (A+M/PMI) processes that are relevant to the realization of fusion energy. The Unit maintains numerical and bibliographical databases and has started a Wiki-style knowledge base. The Unit also contributes to A+M database interface standards and provides a search engine that offers a common interface to multiple numerical A+M/PMI databases. Coordinated Research Projects (CRPs) bring together fusion energy researchers and atomic, molecular and surface physicists for joint work towards the development of new data and new methods. The databases and current CRPs on A+M/PMI processes are briefly described here.

  6. An Overview of Research Infrastructure for Medieval Studies in the United States: Associations, Institutes, and Universities

    Directory of Open Access Journals (Sweden)

    Zan Kocher

    2011-11-01

    Full Text Available This overview of research infrastructure in the United States brieflymentions some institutes, universities, associations, conferences,sources of funding, types of courses, research databases, academicjournals and book publishers. It intends to make American medievalistresources better accessible to colleagues from other countries, and toencourage those who wish to study in the United States and those whoare using the Internet to seek printed or digital materials for theirteaching or research.

  7. The United States Air Force Small Business Innovation Research Program

    Science.gov (United States)

    1990-01-01

    requirements can be met only by importing both ore and Co competing electronic components. *w Bacterial leaching or bio - O leaching is remarkably...pyrite (iron sulfide) or The liquor, the leach residue, and of the aliquot was saved weekly to arsenopyrite (arsenic’iron p11 were analyzed. The...into the soluble sulfate salt. (Fe+’) which serves as a substrate semiconductors. For example, indirect leaching for the bacteria. The process can

  8. The Status of Beryllium Research for Fusion in the United States

    International Nuclear Information System (INIS)

    Glen R. Longhurst

    2003-01-01

    Use of beryllium in fusion reactors has been considered for neutron multiplication in breeding blankets and as an oxygen getter for plasma-facing surfaces. Previous beryllium research for fusion in the United States included issues of interest to fission (swelling and changes in mechanical and thermal properties) as well as interactions with plasmas and hydrogen isotopes and methods of fabrication. When the United States formally withdrew its participation in the International Thermonuclear Experimental Reactor (ITER) program, much of this effort was terminated. The focus in the U.S. has been mainly on toxic effects of beryllium and on industrial hygiene and health-related issues. Work continued at the INEEL and elsewhere on beryllium-containing molten salts. This activity is part of the JUPITER II Agreement. Plasma spray of ITER first wall samples at Los Alamos National Laboratory has been performed under the European Fusion Development Agreement. Effects of irradiation on beryllium structure are being studied at Oak Ridge National Laboratory. Numerical and phenomenological models are being developed and applied to better understand important processes and to assist with design. Presently, studies are underway at the University of California Los Angeles to investigate thermo-mechanical characteristics of beryllium pebble beds, similar to research being carried out at Forschungszentrum Karlsruhe and elsewhere. Additional work, not funded by the fusion program, has dealt with issues of disposal, and recycling

  9. Enabling International Safeguards Research and Development in the United States

    International Nuclear Information System (INIS)

    Dwight, John E.; Schanfein, Mark J.; Bjornard, Trond A.

    2009-01-01

    Idaho National Laboratory (INL) is the lead laboratory in nuclear energy research and development within the U.S. Department of Energy national laboratory complex. INL is tasked with the advancement of nuclear energy research and development, and leadership in the renaissance of nuclear power globally. INL scientists have been central to the assessment of needs and the integration of technical programs aimed at the world-wide growth of nuclear power. One of the grand challenges of the nuclear energy resurgence is nuclear nonproliferation. Nonproliferation technology development is key to meeting this challenge. The needed advances in nonproliferation technologies are being made more difficult by the growing gap between increasing demands for nuclear materials to support technology development, and reduced availability of these materials. The gap is caused by the reduction, consolidation and more stringent lockdown of nuclear materials, made necessary by heightened and evolving security concerns, in the face of increased demand for materials to support technology development. Ironically, the increased demand for materials for technology development is made necessary by these same security concerns. The situation will continue to worsen if safeguards and security budgets remain limited for the International Atomic Energy Agency (IAEA) and many member states, while growth in global nuclear energy becomes a reality. Effective U.S. leadership in the closing of this gap is vital to homeland security and global stability. INL has taken positive steps, described in this paper, to close this gap by reestablishing a viable base for the development, testing and demonstration of safeguards and security technologies. Key attributes of this technology development base are (1) the availability of a wide variety of special nuclear materials in forms that allow for enhanced accessibility; (2) ease of access by U.S. government, national laboratory, industry and academic institution

  10. Developing maintenance technologies for FBR's heat exchanger units by advanced laser processing

    International Nuclear Information System (INIS)

    Nishimura, Akihiko; Shimada, Yukihiro

    2011-01-01

    Laser processing technologies were developed for the purpose of maintenance of FBR's heat exchanger units. Ultrashort laser processing fabricated fiber Bragg grating sensor for seismic monitoring. Fiber laser welding with a newly developed robot system repair cracks on inner wall of heat exchanger tubes. Safety operation of the heat exchanger units will be improved by the advanced laser processing technologies. These technologies are expected to be applied to the maintenance for the next generation FBRs. (author)

  11. An overview of enabling technology research in the United States

    International Nuclear Information System (INIS)

    Baker, Charles C.

    2002-01-01

    The mission of the US Fusion Energy Sciences Program is to advance plasma science, fusion science, and fusion technology--the knowledge base needed for an economically and environmentally attractive fusion energy source. In support of this overall mission, the Enabling Technology Program in the US incorporates both near and long term R and D, contributes to material and engineering sciences as well as technology development, contributes to spin-off applications, and performs global systems assessments and focused design studies. This work supports both magnetic and inertial fusion energy (IFE) concepts. The Enabling Technology research mission is to contribute to the national science and technology base by developing the enabling technology for existing and next-step experimental devices, by exploring and understanding key materials and technology feasibility issues for attractive fusion power sources, by conducting advanced design studies that integrate the wealth of our understanding to guide R and D priorities and by developing design solutions for next-step and future devices. The Enabling Technology Program Plan is organized around five elements: plasma technologies, fusion (chamber) technologies, materials sciences, advanced design, and IFE chamber and target technologies. The principal technical features and research objectives are described for each element

  12. COSTS AND PROFITABILITY IN FOOD PROCESSING: PASTRY TYPE UNITS

    Directory of Open Access Journals (Sweden)

    DUMITRANA MIHAELA

    2013-08-01

    Full Text Available For each company, profitability, products quality and customer satisfaction are the most importanttargets. To attaint these targets, managers need to know all about costs that are used in decision making. Whatkind of costs? How these costs are calculated for a specific sector such as food processing? These are only a fewquestions with answers in our paper. We consider that a case study for this sector may be relevant for all peoplethat are interested to increase the profitability of this specific activity sector.

  13. Analysis of Unit Process Cost for an Engineering-Scale Pyroprocess Facility Using a Process Costing Method in Korea

    Directory of Open Access Journals (Sweden)

    Sungki Kim

    2015-08-01

    Full Text Available Pyroprocessing, which is a dry recycling method, converts spent nuclear fuel into U (Uranium/TRU (TRansUranium metal ingots in a high-temperature molten salt phase. This paper provides the unit process cost of a pyroprocess facility that can process up to 10 tons of pyroprocessing product per year by utilizing the process costing method. Toward this end, the pyroprocess was classified into four kinds of unit processes: pretreatment, electrochemical reduction, electrorefining and electrowinning. The unit process cost was calculated by classifying the cost consumed at each process into raw material and conversion costs. The unit process costs of the pretreatment, electrochemical reduction, electrorefining and electrowinning were calculated as 195 US$/kgU-TRU, 310 US$/kgU-TRU, 215 US$/kgU-TRU and 231 US$/kgU-TRU, respectively. Finally the total pyroprocess cost was calculated as 951 US$/kgU-TRU. In addition, the cost driver for the raw material cost was identified as the cost for Li3PO4, needed for the LiCl-KCl purification process, and platinum as an anode electrode in the electrochemical reduction process.

  14. Involvement of consumers in studies run by the Medical Research Council Clinical Trials Unit: Results of a survey

    Directory of Open Access Journals (Sweden)

    Vale Claire L

    2012-01-01

    Full Text Available Abstract Background We aimed to establish levels of consumer involvement in randomised controlled trials (RCTs, meta-analyses and other studies carried out by the UK Medical Research Council (MRC Clinical Trials Unit across the range of research programs, predominantly in cancer and HIV. Methods Staff responsible for studies that were included in a Unit Progress Report (MRC CTU, April 2009 were asked to complete a semi-structured questionnaire survey regarding consumer involvement. This was defined as active involvement of consumers as partners in the research process and not as subjects of that research. The electronic questionnaires combined open and closed questions, intended to capture quantitative and qualitative information on whether studies had involved consumers; types of activities undertaken; recruitment and support; advantages and disadvantages of involvement and its perceived impact on aspects of the research. Results Between October 2009 and April 2010, 138 completed questionnaires (86% were returned. Studies had been conducted over a 20 year period from 1989, and around half were in cancer; 30% in HIV and 20% were in other disease areas including arthritis, tuberculosis and blood transfusion medicine. Forty-three studies (31% had some consumer involvement, most commonly as members of trial management groups (TMG [88%]. A number of positive impacts on both the research and the researcher were identified. Researchers generally felt involvement was worthwhile and some felt that consumer involvement had improved the credibility of the research. Benefits in design and quality, trial recruitment, dissemination and decision making were also perceived. Researchers felt they learned from consumer involvement, albeit that there were some barriers. Conclusions Whilst most researchers identified benefits of involving consumers, most of studies included in the survey had no involvement. Information from this survey will inform the development

  15. Involvement of consumers in studies run by the Medical Research Council Clinical Trials Unit: results of a survey.

    Science.gov (United States)

    Vale, Claire L; Thompson, Lindsay C; Murphy, Claire; Forcat, Silvia; Hanley, Bec

    2012-01-13

    We aimed to establish levels of consumer involvement in randomised controlled trials (RCTs), meta-analyses and other studies carried out by the UK Medical Research Council (MRC) Clinical Trials Unit across the range of research programs, predominantly in cancer and HIV. Staff responsible for studies that were included in a Unit Progress Report (MRC CTU, April 2009) were asked to complete a semi-structured questionnaire survey regarding consumer involvement. This was defined as active involvement of consumers as partners in the research process and not as subjects of that research. The electronic questionnaires combined open and closed questions, intended to capture quantitative and qualitative information on whether studies had involved consumers; types of activities undertaken; recruitment and support; advantages and disadvantages of involvement and its perceived impact on aspects of the research. Between October 2009 and April 2010, 138 completed questionnaires (86%) were returned. Studies had been conducted over a 20 year period from 1989, and around half were in cancer; 30% in HIV and 20% were in other disease areas including arthritis, tuberculosis and blood transfusion medicine. Forty-three studies (31%) had some consumer involvement, most commonly as members of trial management groups (TMG) [88%]. A number of positive impacts on both the research and the researcher were identified. Researchers generally felt involvement was worthwhile and some felt that consumer involvement had improved the credibility of the research. Benefits in design and quality, trial recruitment, dissemination and decision making were also perceived. Researchers felt they learned from consumer involvement, albeit that there were some barriers. Whilst most researchers identified benefits of involving consumers, most of studies included in the survey had no involvement. Information from this survey will inform the development of a unit policy on consumer involvement, to guide future

  16. Overview of feedstock research in the United States, Canada, and Brazil

    Energy Technology Data Exchange (ETDEWEB)

    Ferrell, J. [Department of Energy, Washington, DC (United States); Tardif, M.L. [CANMET, Ottawa, Ontario (Canada); Couto, L. [Universidade Federal de Vicosa (Brazil); Garca, L.R. [Centro Nacional de Pesquisa de Florestas, Colombo (Brazil); Betters, D. [Colorado State Univ., Fort Collins, CO (United States); Ashworth, J. [Meridian Corp., Alexandria, VA (United States)

    1993-12-31

    This is an overview of the current biomass feedstock efforts in Brazil, Canada, and the United States. The report from Brazil provides an historical perspective of incentive programs, the charcoal and fuelwood energy programs, the alcohol program, and other biomass energy efforts. The efforts in Brazil, particularly with the sugar cane to ethanol and the charcoal and fuelwood programs, dwarfs other commercial biomass systems in the Americas. One of the bright spots in the future is the Biomass Integrated Gasification/Gas Turbine Electricity Project initially funded in 1992. The sugar cane-based ethanol industry continues to develop higher yielding cane varieties and more efficient microorganisms to convert the sugar cane carbohydrates into alcohol. In Canada a number of important institutions and enterprises taking part in the economical development of the country are involved in biomass research and development including various aspects of the biomass such as forestry, agricultural, industrial, urban, food processing, fisheries and peat bogs. Biomass feedstock research in the United States is evolving to reflect Department of Energy priorities. Greater emphasis is placed on leveraging research with the private sector contributing a greater share of funds, for both research and demonstration projects. The feedstock program, managed by ORNL, is focused on limited model species centered at a regional level using a multidisciplinary approach. Activities include a stronger emphasis on emerging environmental issues such as biodiversity, sustainability and habitat management. DOE also is a supporter of the National Biofuels Roundtable, which is developing principles for producing biomass energy in an economically viable and ecologically sound manner. Geographical Information Systems are also being developed as tools to quantify and characterize the potential supply of energy crops in various regions.

  17. An example of a United States Nuclear Research Center

    International Nuclear Information System (INIS)

    Bhattacharyya, S. K.

    1999-01-01

    Under the likely scenario in which public support for nuclear energy remains low and fossil fuels continue to be abundant and cheap, government supported nuclear research centers must adapt their missions to ensure that they tackle problems of current significance. It will be critical to be multidisciplinary, to generate economic value, and to apply nuclear competencies to current problems. Addressing problems in nuclear safety, D and D, nuclear waste management, nonproliferation, isotope production are a few examples of current needs in the nuclear arena. Argonne's original mission, to develop nuclear reactor technology, was a critical need for the U.S. in 1946. It would be wise to recognize that this mission was a special instance of a more general one--to apply unique human and physical capital to long term, high risk technology development in response to society's needs. International collaboration will enhance the collective chances for success as the world moves into the 21st century

  18. Aligning Web-Based Tools to the Research Process Cycle: A Resource for Collaborative Research Projects

    Science.gov (United States)

    Price, Geoffrey P.; Wright, Vivian H.

    2012-01-01

    Using John Creswell's Research Process Cycle as a framework, this article describes various web-based collaborative technologies useful for enhancing the organization and efficiency of educational research. Visualization tools (Cacoo) assist researchers in identifying a research problem. Resource storage tools (Delicious, Mendeley, EasyBib)…

  19. Public Spending on Health Service and Policy Research in Canada, the United Kingdom, and the United States: A Modest Proposal

    Directory of Open Access Journals (Sweden)

    Vidhi Thakkar

    2017-11-01

    Full Text Available Health services and policy research (HSPR represent a multidisciplinary field which integrates knowledge from health economics, health policy, health technology assessment, epidemiology, political science among other fields, to evaluate decisions in health service delivery. Health service decisions are informed by evidence at the clinical, organizational, and policy level, levels with distinct, managerial drivers. HSPR has an evolving discourse spanning knowledge translation, linkage and exchange between research and decision-maker partners and more recently, implementation science and learning health systems. Local context is important for HSPR and is important in advancing health reform practice. The amounts and configuration of national investment in this field remain important considerations which reflect priority investment areas. The priorities set within this field or research may have greater or lesser effects and promise with respect to modernizing health services in pursuit of better value and better population outcomes. Within Canada an asset map for HSPR was published by the national HSPR research institute. Having estimated publiclyfunded research spending in Canada, we sought identify best available comparable estimates from the United States and the United Kingdom. Investments from industry and charitable organizations were not included in these numbers. This commentary explores spending by the United States, Canada, and the United Kingdom on HSPR as a fraction of total public spending on health and the importance of these respective investments in advancing health service performance. Proposals are offered on the merits of common nomenclature and accounting for areas of investigation in pursuit of some comparable way of assessing priority HSPR investments and suggestions for earmarking such investments to total investment in health services spending.

  20. New algorithms and pulse-processing units in radioisotope instruments

    International Nuclear Information System (INIS)

    Antonjak, V.; Gonsjorowski, L.; Jastschuk, E.; Kwasnewski, T.

    1981-01-01

    Three new algorithms and the corresponding electronic circuits are described, beginning with the automatic gain stabilisation circuit for scintillation counters. The signal obtained as the difference between two pulse trains from amplitude discriminators has been used for photomultiplier high voltage control. Furthermore, a real time digital filter for random pulse trains is presented, showing that the variance of pulse trains is decreasing after passing the filter. The block diagram, principle of operation and basic features of the filter are given. Finally, a digital circuit for polynomial linearization of the scale function in radioisotope instruments is described. Again, the block diagram of pulse train processing, the mode of operation and programming method are given. (author)

  1. Design Process-System and Methodology of Design Research

    Science.gov (United States)

    Bashier, Fathi

    2017-10-01

    Studies have recognized the failure of the traditional design approach both in practice and in the studio. They showed that design problems today are too complex for the traditional approach to cope with and reflected a new interest in a better quality design services in order to meet the challenges of our time. In the mid-1970s and early 1980s, there has been a significant shift in focus within the field of design research towards the aim of creating a ‘design discipline’. The problem, as will be discussed, is the lack of an integrated theory of design knowledge that can explicitly describe the design process in a coherent way. As a consequence, the traditional approach fails to operate systematically, in a disciplinary manner. Addressing this problem is the primary goal of the research study in the design process currently being conducted in the research-based master studio at Wollega University, Ethiopia. The research study seeks to make a contribution towards a disciplinary approach, through proper understanding the mechanism of knowledge development within design process systems. This is the task of the ‘theory of design knowledge’. In this article the research project is introduced, and a model of the design process-system is developed in the studio as a research plan and a tool of design research at the same time. Based on data drawn from students’ research projects, the theory of design knowledge is developed and empirically verified through the research project.

  2. The Curriculum Planning Process for Undergraduate Game Degree Programs in the United Kingdom and United States

    Science.gov (United States)

    McGill, Monica M.

    2012-01-01

    Digital games are marketed, mass-produced, and consumed by an increasing number of people and the game industry is only expected to grow. In response, postsecondary institutions in the UK and the U.S. have started to create game degree programs. Though curriculum theorists provide insight into the process of creating a new program, no formal…

  3. Lightweight concrete masonry units based on processed granulate of corn cob as aggregate

    Directory of Open Access Journals (Sweden)

    Faustino, J.

    2015-06-01

    Full Text Available A research work was performed in order to assess the potential application of processed granulate of corn cob (PCC as an alternative lightweight aggregate for the manufacturing process of lightweight concrete masonry units (CMU. Therefore, CMU-PCC were prepared in a factory using a typical lightweight concrete mixture for non-structural purposes. Additionally, lightweight concrete masonry units based on a currently applied lightweight aggregate such as expanded clay (CMU-EC were also manufactured. An experimental work allowed achieving a set of results that suggest that the proposed building product presents interesting material properties within the masonry wall context. Therefore, this unit is promising for both interior and exterior applications. This conclusion is even more relevant considering that corn cob is an agricultural waste product.En este trabajo de investigación se evaluó la posible aplicación de granulado procesado de la mazorca de maiz como un árido ligero alternativo en el proceso de fabricación de unidades de mampostería de hormigón ligero. Con esta finalidad, se prepararon en una fábrica diversas unidades de mampostería no estructural con granulado procesado de la mazorca de maiz. Además, se fabricaran unidades de mampostería estándar de peso ligero basado en agregados de arcilla expandida. Este trabajo experimental permitió lograr un conjunto de resultados que sugieren que el producto de construcción propuesto presenta interesantes propiedades materiales en el contexto de la pared de mampostería. Por lo tanto, esta solución es prometedora tanto para aplicaciones interiores y exteriores. Esta conclusión es aún más relevante teniendo en cuenta que la mazorca de maíz es un producto de desecho agrícola.

  4. Measuring methods, registration and signal processing for magnetic field research

    International Nuclear Information System (INIS)

    Nagiello, Z.

    1981-01-01

    Some measuring methods and signal processing systems based on analogue and digital technics, which have been applied in magnetic field research using magnetometers with ferromagnetic transducers, are presented. (author)

  5. International stem cell collaboration: how disparate policies between the United States and the United Kingdom impact research.

    Science.gov (United States)

    Luo, Jingyuan; Flynn, Jesse M; Solnick, Rachel E; Ecklund, Elaine Howard; Matthews, Kirstin R W

    2011-03-08

    As the scientific community globalizes, it is increasingly important to understand the effects of international collaboration on the quality and quantity of research produced. While it is generally assumed that international collaboration enhances the quality of research, this phenomenon is not well examined. Stem cell research is unique in that it is both politically charged and a research area that often generates international collaborations, making it an ideal case through which to examine international collaborations. Furthermore, with promising medical applications, the research area is dynamic and responsive to a globalizing science environment. Thus, studying international collaborations in stem cell research elucidates the role of existing international networks in promoting quality research, as well as the effects that disparate national policies might have on research. This study examined the impact of collaboration on publication significance in the United States and the United Kingdom, world leaders in stem cell research with disparate policies. We reviewed publications by US and UK authors from 2008, along with their citation rates and the political factors that may have contributed to the number of international collaborations. The data demonstrated that international collaborations significantly increased an article's impact for UK and US investigators. While this applied to UK authors whether they were corresponding or secondary, this effect was most significant for US authors who were corresponding authors. While the UK exhibited a higher proportion of international publications than the US, this difference was consistent with overall trends in international scientific collaboration. The findings suggested that national stem cell policy differences and regulatory mechanisms driving international stem cell research in the US and UK did not affect the frequency of international collaborations, or even the countries with which the US and UK most

  6. Low cost solar array project production process and equipment task. A Module Experimental Process System Development Unit (MEPSDU)

    Science.gov (United States)

    1981-01-01

    Technical readiness for the production of photovoltaic modules using single crystal silicon dendritic web sheet material is demonstrated by: (1) selection, design and implementation of solar cell and photovoltaic module process sequence in a Module Experimental Process System Development Unit; (2) demonstration runs; (3) passing of acceptance and qualification tests; and (4) achievement of a cost effective module.

  7. ENTREPRENEURIAL OPPORTUNITIES IN FOOD PROCESSING UNITS (WITH SPECIAL REFERENCES TO BYADGI RED CHILLI COLD STORAGE UNITS IN THE KARNATAKA STATE

    Directory of Open Access Journals (Sweden)

    P. ISHWARA

    2010-01-01

    Full Text Available After the green revolution, we are now ushering in the evergreen revolution in the country; food processing is an evergreen activity. It is the key to the agricultural sector. In this paper an attempt has been made to study the workings of food processing units with special references to Red Chilli Cold Storage units in the Byadgi district of Karnataka State. Byadgi has been famous for Red Chilli since the days it’s of antiquity. The vast and extensive market yard in Byadagi taluk is famous as the second largest Red Chilli dealing market in the country. However, the most common and recurring problem faced by the farmer is inability to store enough red chilli from one harvest to another. Red chilli that was locally abundant for only a short period of time had to be stored against times of scarcity. In recent years, due to Oleoresin, demand for Red Chilli has grow from other countries like Sri Lanka, Bangladesh, America, Europe, Nepal, Indonesia, Mexico etc. The study reveals that all the cold storage units of the study area have been using vapour compression refrigeration system or method. All entrepreneurs have satisfied with their turnover and profit and they are in a good economic position. Even though the average turnover and profits are increased, few units have shown negligible amount of decrease in turnover and profit. This is due to the competition from increasing number of cold storages and early established units. The cold storages of the study area have been storing Red chilli, Chilli seeds, Chilli powder, Tamarind, Jeera, Dania, Turmeric, Sunflower, Zinger, Channa, Flower seeds etc,. But the 80 per cent of the each cold storage is filled by the red chilli this is due to the existence of vast and extensivered chilli market yard in the Byadgi. There is no business without problems. In the same way the entrepreneurs who are chosen for the study are facing a few problems in their business like skilled labour, technical and management

  8. Sanford Underground Research Facility - The United State's Deep Underground Research Facility

    Science.gov (United States)

    Vardiman, D.

    2012-12-01

    The 2.5 km deep Sanford Underground Research Facility (SURF) is managed by the South Dakota Science and Technology Authority (SDSTA) at the former Homestake Mine site in Lead, South Dakota. The US Department of Energy currently supports the development of the facility using a phased approach for underground deployment of experiments as they obtain an advanced design stage. The geology of the Sanford Laboratory site has been studied during the 125 years of operations at the Homestake Mine and more recently as part of the preliminary geotechnical site investigations for the NSF's Deep Underground Science and Engineering Laboratory project. The overall geology at DUSEL is a well-defined stratigraphic sequence of schist and phyllites. The three major Proterozoic units encountered in the underground consist of interbedded schist, metasediments, and amphibolite schist which are crosscut by Tertiary rhyolite dikes. Preliminary geotechnical site investigations included drift mapping, borehole drilling, borehole televiewing, in-situ stress analysis, laboratory analysis of core, mapping and laser scanning of new excavations, modeling and analysis of all geotechnical information. The investigation was focused upon the determination if the proposed site rock mass could support the world's largest (66 meter diameter) deep underground excavation. While the DUSEL project has subsequently been significantly modified, these data are still available to provide a baseline of the ground conditions which may be judiciously extrapolated throughout the entire Proterozoic rock assemblage for future excavations. Recommendations for facility instrumentation and monitoring were included in the preliminary design of the DUSEL project design and include; single and multiple point extensometers, tape extensometers and convergence measurements (pins), load cells and pressure cells, smart cables, inclinometers/Tiltmeters, Piezometers, thermistors, seismographs and accelerometers, scanners (laser

  9. A FPGA-based signal processing unit for a GEM array detector

    International Nuclear Information System (INIS)

    Yen, W.W.; Chou, H.P.

    2013-06-01

    in the present study, a signal processing unit for a GEM one-dimensional array detector is presented to measure the trajectory of photoelectrons produced by cosmic X-rays. The present GEM array detector system has 16 signal channels. The front-end unit provides timing signals from trigger units and energy signals from charge sensitive amplifies. The prototype of the processing unit is implemented using commercial field programmable gate array circuit boards. The FPGA based system is linked to a personal computer for testing and data analysis. Tests using simulated signals indicated that the FPGA-based signal processing unit has a good linearity and is flexible for parameter adjustment for various experimental conditions (authors)

  10. The Development and Current State of Translation Process Research

    DEFF Research Database (Denmark)

    Lykke Jakobsen, Arnt

    2014-01-01

    The development and current state of translation process research ch Arnt Lykke Jakobsen Copenhagen Business School lInterest in process-oriented translation studies has been intense for the past almost half a century. Translation process research (TPR) is the label we have used to refer to a spe...... itself, into regions like cognitive psychology, psycho- and neurolinguistics, and neuroscience, where the interest in what goes on in our heads is also very strong.......The development and current state of translation process research ch Arnt Lykke Jakobsen Copenhagen Business School lInterest in process-oriented translation studies has been intense for the past almost half a century. Translation process research (TPR) is the label we have used to refer...... which simultaneously tracks the translator’s eye movements across a screen displaying both a source text and the translator’s emerging translation. This research method was developed as a means of qualifying and strengthening translation process hypotheses based on verbal reports by providing additional...

  11. Developing a clinical trial unit to advance research in an academic institution.

    Science.gov (United States)

    Croghan, Ivana T; Viker, Steven D; Limper, Andrew H; Evans, Tamara K; Cornell, Alissa R; Ebbert, Jon O; Gertz, Morie A

    2015-11-01

    Research, clinical care, and education are the three cornerstones of academic health centers in the United States. The research climate has always been riddled with ebbs and flows, depending on funding availability. During a time of reduced funding, the number and scope of research studies have been reduced, and in some instances, a field of study has been eliminated. Recent reductions in the research funding landscape have led institutions to explore new ways to continue supporting research. Mayo Clinic in Rochester, MN has developed a clinical trial unit within the Department of Medicine, which provides shared resources for many researchers and serves as a solution for training and mentoring new investigators and study teams. By building on existing infrastructure and providing supplemental resources to existing research, the Department of Medicine clinical trial unit has evolved into an effective mechanism for conducting research. This article discusses the creation of a central unit to provide research support in clinical trials and presents the advantages, disadvantages, and required building blocks for such a unit. Copyright © 2015 Mayo Clinic. Published by Elsevier Inc. All rights reserved.

  12. Coupled processes in NRC high-level waste research

    International Nuclear Information System (INIS)

    Costanzi, F.A.

    1987-01-01

    The author discusses NRC research effort in support of evaluating license applications for disposal of nuclear waste and for promulgating regulations and issuing guidance documents on nuclear waste management. In order to do this they fund research activities at a number of laboratories, academic institutions, and commercial organizations. One of our research efforts is the coupled processes study. This paper discusses interest in coupled processes and describes the target areas of research efforts over the next few years. The specific research activities relate to the performance objectives of NRC's high-level waste (HLW) regulation and the U.S. Environmental Protection Agency (EPA) HLW standard. The general objective of the research program is to ensure the NRC has a sufficient independent technical base to make sound regulatory decisions

  13. The care unit in nursing home research: evidence in support of a definition.

    Science.gov (United States)

    Estabrooks, Carole A; Morgan, Debra G; Squires, Janet E; Boström, Anne-Marie; Slaughter, Susan E; Cummings, Greta G; Norton, Peter G

    2011-04-14

    Defining what constitutes a resident care unit in nursing home research is both a conceptual and practical challenge. The aim of this paper is to provide evidence in support of a definition of care unit in nursing homes by demonstrating: (1) its feasibility for use in data collection, (2) the acceptability of aggregating individual responses to the unit level, and (3) the benefit of including unit level data in explanatory models. An observational study design was used. Research (project) managers, healthcare aides, care managers, nursing home administrators and directors of care from thirty-six nursing homes in the Canadian prairie provinces of Alberta, Saskatchewan and Manitoba provided data for the study. A definition of care unit was developed and applied in data collection and analyses. A debriefing session was held with research managers to investigate their experiences with using the care unit definition. In addition, survey responses from 1258 healthcare aides in 25 of the 36 nursing homes in the study, that had more than one care unit, were analyzed using a multi-level modeling approach. Trained field workers administered the Alberta Context Tool (ACT), a 58-item self-report survey reflecting 10 organizational context concepts, to healthcare aides using computer assisted personal interviews. To assess the appropriateness of obtaining unit level scores, we assessed aggregation statistics (ICC(1), ICC(2), η², and ω²), and to assess the value of using the definition of unit in explanatory models, we performed multi-level modeling. In 10 of the 36 nursing homes, the care unit definition developed was used to align the survey data (for analytic purposes) to specific care units as designated by our definition, from that reported by the facility administrator. The aggregation statistics supported aggregating the healthcare aide responses on the ACT to the realigned unit level. Findings from the multi-level modeling further supported unit level aggregation. A

  14. Complexity, Methodology and Method: Crafting a Critical Process of Research

    Science.gov (United States)

    Alhadeff-Jones, Michel

    2013-01-01

    This paper defines a theoretical framework aiming to support the actions and reflections of researchers looking for a "method" in order to critically conceive the complexity of a scientific process of research. First, it starts with a brief overview of the core assumptions framing Morin's "paradigm of complexity" and Le…

  15. Processing of LLRW arising from AECL nuclear research centres

    International Nuclear Information System (INIS)

    Buckley, L.P.; Le, V.T.; Beamer, N.V.; Brown, W.P.; Helbrecht, R.A.

    1988-11-01

    Operation of nuclear research reactors and laboratories results in the generation of a wide variety of solid and liquid radioactive wastes. This paper describes practical experience with processing of low-level radioactive wastes at two major nuclear research centres in Canada

  16. Understanding the selection processes of public research projects

    NARCIS (Netherlands)

    Materia, V.C.; Pascucci, S.; Kolympiris, C.

    2015-01-01

    This paper analyses factors that affect the funding of agricultural research projects by regional governments and other regional public authorities. We study the selection process of agricultural research projects funded by the emilia Romagna regional government in Italy, which follows funding

  17. Urban forestry research needs: a participatory assessment process

    Science.gov (United States)

    Kathleen L. Wolf; Linda E. Kruger

    2010-01-01

    New research initiatives focusing on urban ecology and natural resources are underway. Such programs coincide with increased local government action in urban forest planning and management, activities that are enhanced by scientific knowledge. This project used a participatory stakeholder process to explore and understand urban forestry research and technology transfer...

  18. Addiction research centres and the nurturing of creativity: The Alcohol & Drug Abuse Research Unit at the South African Medical Research Council - strengthening substance abuse research and policy in South Africa.

    Science.gov (United States)

    Parry, Charles; Morojele, Neo; Myers, Bronwyn; Plüddemann, Andreas

    2013-01-01

    The Alcohol and Drug Abuse Research Unit (ADARU) was established at the South African Medical Research Council (MRC) at the beginning of 2001, although its origins lie in the activities of the Centre for Epidemiological Research in Southern Africa and other MRC entities. Initial challenges included attracting external funding, recruiting new staff, developing the skills of junior staff, publishing in international journals and building national and international collaborative networks. ADARU currently comprises a core staff of 33 members who work on 22 projects spanning substance use epidemiology and associated consequences, intervention studies with at-risk populations and services research. A large component of this portfolio focuses on the link between alcohol and other drug use and human immunodeficiency virus (HIV) risk behaviour, with funding from the US Centers for Disease Control and Prevention. Junior staff members are encouraged to develop independent research interests and pursue PhD studies. Research outputs, such as the 20 papers that were published in 2010 and the 35 conference presentations from that year, form an important part of the unit's research translation activities. We engage actively with policy processes at the local, provincial, national and international levels, and have given particular attention to alcohol policy in recent years. The paper includes an analysis of major challenges currently facing the unit and how we are attempting to address them. It ends with some thoughts on what the unit intends doing to enhance the quality of its research, the capacity of its staff and its international standing. © 2011 The Authors, Addiction © 2011 Society for the Study of Addiction.

  19. Central Processing Dysfunctions in Children: A Review of Research.

    Science.gov (United States)

    Chalfant, James C.; Scheffelin, Margaret A.

    Research on central processing dysfunctions in children is reviewed in three major areas. The first, dysfunctions in the analysis of sensory information, includes auditory, visual, and haptic processing. The second, dysfunction in the synthesis of sensory information, covers multiple stimulus integration and short-term memory. The third area of…

  20. Exploring the intricacies of contemporary Phd research process ...

    African Journals Online (AJOL)

    The process leading to a PhD degree award has evolved over a period of many years to become what it is today. There are important considerations and emphasis continually being placed by the degree awarding authorities on the PhD research process leading to this award. The authors of this communication wish to ...

  1. Research ethics and approval process: A guide for new GP researchers.

    Science.gov (United States)

    Liaw, Siaw-Teng; Tam, Chun Wah Michael

    2015-06-01

    The underlying moral principles and values, and the virtues held as desirable for a researcher, should be reflected upon and embedded in the research. The foundation step is to download the National Health and Medical Research Council's (NHMRC's) National Statement on Ethical Conduct in Human Research and the NHMRC's Guidelines for Ethical Conduct in Aboriginal and Torres Strait Islander Health Research to use as references. This paper draws on the experience of The Royal Australian College of General Practitioners' (RACGP's) National Research and Evaluation Ethics Committee to provide an eight-step approach to the research ethics process. The researcher should use the research ethics process as an opportunity to foster and guide the development and conduct of ethical research.

  2. Report by the AERES on the unit: Research unit on the environment under the supervision of establishments and bodies: IRSN

    International Nuclear Information System (INIS)

    2010-10-01

    This report is a kind of audit report on a research laboratory. The authors discuss an assessment of the whole unit activities in terms of strengths and opportunities, aspects to be improved and risks, productions and publications, scientific quality, influence and attractiveness (awards, recruitment capacity, capacity to obtain financing and to tender, participation to international programs), strategy and governance, and project. These same aspects are then discussed and commented for each research axis: study of the seismic hazard, study of risk management related to waste storage in deep geological layer, radionuclide transfer in the biosphere, study of the effects on ecosystems of a chronic exposure to radioactive materials

  3. Design, manufacturing and commissioning of mobile unit for EDF (Dow Chemical process)

    International Nuclear Information System (INIS)

    Cangini, D.; Cordier, J.P.; PEC Engineering, Osny, France)

    1985-01-01

    To process their spent ion exchange resins and the liquid wastes, EDF has ordered from PEC a mobile unit using the DOW CHEMICAL binder. This paper presents the EDF's design requirements as well as the new French regulation for waste embedding. The mobile unit was started in January 1983 and commissioned successfully in January 1985 in the TRICASTIN EDF's power plant

  4. A low-cost system for graphical process monitoring with colour video symbol display units

    International Nuclear Information System (INIS)

    Grauer, H.; Jarsch, V.; Mueller, W.

    1977-01-01

    A system for computer controlled graphic process supervision, using color symbol video displays is described. It has the following characteristics: - compact unit: no external memory for image storage - problem oriented simple descriptive cut to the process program - no restriction of the graphical representation of process variables - computer and display independent, by implementation of colours and parameterized code creation for the display. (WB) [de

  5. 32 CFR 516.11 - Service of criminal process outside the United States.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 3 2010-07-01 2010-07-01 true Service of criminal process outside the United... AID OF CIVIL AUTHORITIES AND PUBLIC RELATIONS LITIGATION Service of Process § 516.11 Service of... status of forces agreements, govern the service of criminal process of foreign courts and the surrender...

  6. Research needs for strandplain/barrier island reservoirs in the United States

    Energy Technology Data Exchange (ETDEWEB)

    Cole, E.L.; Fowler, M.L.; Salamy, S.P.; Sarathi, P.S.; Young, M.A.

    1994-12-01

    This report identifies reservoir characterization and reservoir management research needs and IOR process and related research needs for the fourth geologic class, strandplain/barrier island reservoirs. The 330 Class 4 reservoirs in the DOE Tertiary OH Recovery Information System (TORIS) database contain about 30.8 billion barrels of oil or about 9% of the total original oil-in-place (OOIP) in all United States reservoirs. The current projection of Class 4 ultimate recovery with current operations is only 38% of the OOIP, leaving 19 billion barrels as the target for future IOR projects. Using the TORIS database and its predictive and economic models, the recovery potential which could result from future application of IOR technologies to Class 4 reservoirs was estimated to be between 1.0 and 4.3 billion barrels, depending on oil price and the level of technology advancement. The analysis indicated that this potential could be realized through (1) infill drilling alone and in combination with polymer flooding and profile modification, (2) chemical flooding (surfactant), and (3) thermal processes. Most of this future potential is in Texas, Oklahoma, California, and the Rocky Mountain region. Approximately two-thirds of the potentially recoverable resource is at risk of abandonment by the year 2000, which emphasizes the urgent need for the development and demonstration of cost-effective recovery technologies.

  7. ACTION OF UNIFORM SEARCH ALGORITHM WHEN SELECTING LANGUAGE UNITS IN THE PROCESS OF SPEECH

    Directory of Open Access Journals (Sweden)

    Ирина Михайловна Некипелова

    2013-05-01

    Full Text Available The article is devoted to research of action of uniform search algorithm when selecting by human of language units for speech produce. The process is connected with a speech optimization phenomenon. This makes it possible to shorten the time of cogitation something that human want to say, and to achieve the maximum precision in thoughts expression. The algorithm of uniform search works at consciousness  and subconsciousness levels. It favours the forming of automatism produce and perception of speech. Realization of human's cognitive potential in the process of communication starts up complicated mechanism of self-organization and self-regulation of language. In turn, it results in optimization of language system, servicing needs not only human's self-actualization but realization of communication in society. The method of problem-oriented search is used for researching of optimization mechanisms, which are distinctive to speech producing and stabilization of language.DOI: http://dx.doi.org/10.12731/2218-7405-2013-4-50

  8. Coordinated Research Projects of the IAEA Atomic and Molecular Data Unit

    Science.gov (United States)

    Braams, B. J.; Chung, H.-K.

    2011-05-01

    The IAEA Atomic and Molecular Data Unit is dedicated to the provision of databases for atomic, molecular and plasma-material interaction (AM/PMI) data that are relevant for nuclear fusion research. IAEA Coordinated Research Projects (CRPs) are the principal mechanism by which the Unit encourages data evaluation and the production of new data. Ongoing and planned CRPs on AM/PMI data are briefly described here.

  9. Coordinated Research Projects of the IAEA Atomic and Molecular Data Unit

    International Nuclear Information System (INIS)

    Braams, B. J.; Chung, H.-K.

    2011-01-01

    The IAEA Atomic and Molecular Data Unit is dedicated to the provision of databases for atomic, molecular and plasma-material interaction (AM/PMI) data that are relevant for nuclear fusion research. IAEA Coordinated Research Projects (CRPs) are the principal mechanism by which the Unit encourages data evaluation and the production of new data. Ongoing and planned CRPs on AM/PMI data are briefly described here.

  10. Silicon Carbide (SiC) Power Processing Unit (PPU) for Hall Effect Thrusters, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — In this SBIR project, APEI, Inc. is proposing to develop a high efficiency, rad-hard 3.8 kW silicon carbide (SiC) Power Processing Unit (PPU) for Hall Effect...

  11. Process quality in the Trade Finance unit from the perspective of corporate banking employees

    OpenAIRE

    Mikkola, Henri

    2013-01-01

    This thesis examines the quality of the processes in the Trade Finance unit of Pohjola Bank, from the perspective of the corporate banking employees at Helsinki OP Bank. The Trade Finance unit provides methods of payment for foreign trade. Such services are intended for companies and the perspective investigated in this thesis is that of corporate banking employees. The purpose of this thesis is to define the quality of the processes and to develop solutions for difficulties discovered. The q...

  12. Stochastic Analysis of a Queue Length Model Using a Graphics Processing Unit

    Czech Academy of Sciences Publication Activity Database

    Přikryl, Jan; Kocijan, J.

    2012-01-01

    Roč. 5, č. 2 (2012), s. 55-62 ISSN 1802-971X R&D Projects: GA MŠk(CZ) MEB091015 Institutional support: RVO:67985556 Keywords : graphics processing unit * GPU * Monte Carlo simulation * computer simulation * modeling Subject RIV: BC - Control Systems Theory http://library.utia.cas.cz/separaty/2012/AS/prikryl-stochastic analysis of a queue length model using a graphics processing unit.pdf

  13. Design and Statistics in Quantitative Translation (Process) Research

    DEFF Research Database (Denmark)

    Balling, Laura Winther; Hvelplund, Kristian Tangsgaard

    2015-01-01

    Traditionally, translation research has been qualitative, but quantitative research is becoming increasingly important, especially in translation process research but also in other areas of translation studies. This poses problems to many translation scholars since this way of thinking...... is unfamiliar. In this article, we attempt to mitigate these problems by outlining our approach to good quantitative research, all the way from research questions and study design to data preparation and statistics. We concentrate especially on the nature of the variables involved, both in terms of their scale...... and their role in the design; this has implications for both design and choice of statistics. Although we focus on quantitative research, we also argue that such research should be supplemented with qualitative analyses and considerations of the translation product....

  14. Autoethnography and Psychodynamics in Interrelational Spaces of the Research Process

    DEFF Research Database (Denmark)

    Dybbroe, Betina; Hansson, Birgitte

    2012-01-01

    This article takes the stance that the subjectivity of the researcher is an integral part of the research process. It should be studied as a key to understanding the interrelational processes of meaning in an interview situation. The article demonstrates how the subjectivity of the researcher can...... be made accessible methodologically and methodically by combining a psychodynamic approach with an autoethnographic approach. The methodical question is therefore how the researcher can conduct introspection and at the same time reflect upon and analyse the central object of investigation. The approach...... is psychoanalytically informed, but autoethnography became the actual vehicle for moving beyond reflections on the psychodynamics represented in the texts. The researcher ventured into an introspection of not only the texts, but also her own feelings, fantasies, and bodily experiences at the time of the interview...

  15. Box: Natural Language Processing Research Using Amazon Web Services

    Directory of Open Access Journals (Sweden)

    Axelrod Amittai

    2015-10-01

    Full Text Available We present a publicly-available state-of-the-art research and development platform for Machine Translation and Natural Language Processing that runs on the Amazon Elastic Compute Cloud. This provides a standardized research environment for all users, and enables perfect reproducibility and compatibility. Box also enables users to use their hardware budget to avoid the management and logistical overhead of maintaining a research lab, yet still participate in global research community with the same state-of-the-art tools.

  16. Using Computers in Educational and Psychological Research: Using Information Technolgies to Support the Research Process

    Science.gov (United States)

    Willis, Jerry; Kim, Seung H.

    2006-01-01

    This book has been designed to assist researchers in the social sciences and education fields who are interested in learning how information technologies can help them successfully navigate the research process. Most researchers are familiar with the use of programs like SPSS to analyze data, but many are not aware of other ways information…

  17. Federal research, development, and demonstration priorities for carbon dioxide removal in the United States

    Science.gov (United States)

    Sanchez, Daniel L.; Amador, Giana; Funk, Jason; Mach, Katharine J.

    2018-01-01

    Atmospheric carbon dioxide removal (CDR) technologies may be critical to achieving deep decarbonization. Yet a lack of technical and commercial maturity of CDR technologies hinders potential deployment. Needs for commercialization span research, development, and demonstration (RD&D) activities, including development of new materials, reactors, and processes, and rigorous monitoring of a portfolio of demonstration projects. As a world leader in supporting science and engineering, the United States (US) can play an important role in reducing costs and clarifying the sustainable scale of CDR. To date, federal agencies have focused on voluntary or piecemeal CDR programs. Here, we present a synthesis of research and developement needs, relevant agency authority, barriers to coordination, and interventions to enhance RD&D across the federal government of the US. On the basis of agency authority and expertise, the Department of Energy, Department of Agriculture, Department of the Interior, National Oceanic and Atmospheric Administration, and National Science Foundation are most central to conducting research, funding projects, monitoring effects, and promulgating regulations. Key enablers for successful programs include embracing technological diversity and administrative efficiency, fostering agency buy-in, and achieving commercial deployment. Based on these criteria, the executive branch could effectively coordinate RD&D strategy through two complementary pathways: (1) renewing intra-agency commitment to CDR in five primary agencies, including both research and demonstration, and (2) coordinating research prioritization and outcomes across agencies, led by the Office of Science and Technology Policy and loosely based on the National Nanotechnology Initiative. Both pathways can be stimulated by executive order or Congressional mandate. Executive branch implementation can begin at any time; future Farm and Energy Bills provide legislative vehicles for enhancing programs.

  18. Problem-centric Process for Research-based Learning

    Directory of Open Access Journals (Sweden)

    Khaled Shaban

    2015-05-01

    Full Text Available Research-based Learning (RbL extends Inquiry and Project-based Learning by facilitating an early stage exposure and training for future scientists through authentic research activities. In this paper, an iterative problem-centric RbL process is introduced, and its activities and management aspects are described. The process helps implement course-integrated research systematically and practically. Furthermore, the novel process follows constructivist methods in incorporating inquiry, scaffolding, open-ended projects, as well as a goal oriented learning approach. The RbL process is adopted in two advanced computing courses, at two different universities: a leading comprehensive Western university and a new university in a developing country. The paper summarizes new lessons learned in these rewarding experiences. In particular, the instructor should help students start their projects, by providing them with previous work or data and pre-approving the papers to review by students. He should also maintain a continuous feedback to and from students to keep the students motivated and help the instructor refine and adapt the RBL process. We note that research collaborators can help students in identifying the research topics early. The paper also shows how to alleviate difficulties that may be encountered by students who find the novel approach demanding, and consequently it also helps the instructors better manage the course contents.

  19. Reclaiming Queerness: Self, Identity, and the Research Process

    Directory of Open Access Journals (Sweden)

    Janna Marie Jackson

    2007-01-01

    Full Text Available This article explores some of the challenges and benefits of doing a dissertation with participants from a population to which I belong and on a topic some consider controversial, that of gay and lesbian educators. I describe the homophobia I experienced and how that homophobia affected my choice of topic, the research process, and my job prospects. Each step of this research journey presented me with a variety of delicate decisions. I discuss my thought processes in resolving these dilemmas and some of the practical solutions I used to address a variety of difficulties. Although written specifically about doing research with gay and lesbian teachers, many of the lessons I learned throughout this process can be applied to a range of research situations. For example, many researchers share cultural backgrounds with their participants. This presents both the opportunity to establish rapport with participants quickly but also the danger of the researcher reading his or her own experiences into the data. I describe some of the ways I addressed this issue as well as others commonly faced by those doing dissertations. I conclude that doing a dissertation on a topic I feel passionately about sustained me throughout the dissertation process.

  20. Industrial process gamma tomography. Final report of a coordinated research project 2003-2007

    International Nuclear Information System (INIS)

    2008-05-01

    Gamma computed tomography (CT) is complementary to radiotracer and gamma sealed source techniques largely used for analyzing industrial process units. Relevant target areas for gamma CT applications are generally known. Although the methodology is generic and applicable across broad industrial specimen and facilities, a number of specific items have been identified as the most appropriate target beneficiaries of these applications: distillation columns; packed beds; risers; fluidized beds and other multiphase processing units. These industrial process units present significant technical challenges to CT investigations in terms of the complexity of the multiphase flows that occur in them. In order to address these needs, the IAEA implemented a Coordinated Research Project (CRP) on Industrial Process Gamma Tomography with the overall objective of testing and validating CT techniques for diagnosing industrial multiphase processes. CT laboratories from Argentina, Brazil, Czech Republic, France, Republic of Korea, Malaysia, Norway, Poland, United Kingdom and the United States of America have participated. The specific objectives of the CRP were assessment of the tomographic methods, evaluation of them for investigation of multiphase engineering processes, and design of prototypes of simple CT systems for industrial processing, which can be transferred to other developing countries. The CRP has generated an active network, which also included other groups engaged in the CT field. The round robin test has played an important role in validation of techniques and software. This TECDOC is prepared based on the findings and achievements of the CRP. It is a comprehensive technical report containing valuable information, not readily available in any single publication elsewhere. The participants' reports and software developed by them are compiled in a CD-ROM and attached to the back cover. The guidelines and software packages described in this report can be used as an

  1. RESEARCH UTILIZATION IN THE DESIGN DECISION MAKING PROCESS

    Directory of Open Access Journals (Sweden)

    Amy Huber

    2016-04-01

    Full Text Available This article summarizes findings from a national survey of interior design practitioners in the United States (N=366.  The study explored interior design practitioners' current preferences for conducting project research including: activities conducted and sources used, attraction to and recall from sources, and ideas for communicating research findings. Responses suggest that interior designers do value research, yet have little time to utilize research. While cross-tabulation analyses indicate no major differences in research activities between the study’s demographic groups, collectively, only 12% of the sample indicated they utilized academic journals and, at times, even incorrectly identified those sources. Open-ended responses allowed designers to offer ideas for communicating research and four key themes emerged, including: topic selection and relevancy, ideas for new dissemination methods, ideas for presentation style, and perceptions of the written language used.  It is hoped that this study’s findings may help design researchers better communicate their own findings to design practitioners.

  2. Water Use in the United States Energy System: A National Assessment and Unit Process Inventory of Water Consumption and Withdrawals.

    Science.gov (United States)

    Grubert, Emily; Sanders, Kelly T

    2018-06-05

    The United States (US) energy system is a large water user, but the nature of that use is poorly understood. To support resource comanagement and fill this noted gap in the literature, this work presents detailed estimates for US-based water consumption and withdrawals for the US energy system as of 2014, including both intensity values and the first known estimate of total water consumption and withdrawal by the US energy system. We address 126 unit processes, many of which are new additions to the literature, differentiated among 17 fuel cycles, five life cycle stages, three water source categories, and four levels of water quality. Overall coverage is about 99% of commercially traded US primary energy consumption with detailed energy flows by unit process. Energy-related water consumption, or water removed from its source and not directly returned, accounts for about 10% of both total and freshwater US water consumption. Major consumers include biofuels (via irrigation), oil (via deep well injection, usually of nonfreshwater), and hydropower (via evaporation and seepage). The US energy system also accounts for about 40% of both total and freshwater US water withdrawals, i.e., water removed from its source regardless of fate. About 70% of withdrawals are associated with the once-through cooling systems of approximately 300 steam cycle power plants that produce about 25% of US electricity.

  3. Speaking the right language: the scientific method as a framework for a continuous quality improvement program within academic medical research compliance units.

    Science.gov (United States)

    Nolte, Kurt B; Stewart, Douglas M; O'Hair, Kevin C; Gannon, William L; Briggs, Michael S; Barron, A Marie; Pointer, Judy; Larson, Richard S

    2008-10-01

    The authors developed a novel continuous quality improvement (CQI) process for academic biomedical research compliance administration. A challenge in developing a quality improvement program in a nonbusiness environment is that the terminology and processes are often foreign. Rather than training staff in an existing quality improvement process, the authors opted to develop a novel process based on the scientific method--a paradigm familiar to all team members. The CQI process included our research compliance units. Unit leaders identified problems in compliance administration where a resolution would have a positive impact and which could be resolved or improved with current resources. They then generated testable hypotheses about a change to standard practice expected to improve the problem, and they developed methods and metrics to assess the impact of the change. The CQI process was managed in a "peer review" environment. The program included processes to reduce the incidence of infections in animal colonies, decrease research protocol-approval times, improve compliance and protection of animal and human research subjects, and improve research protocol quality. This novel CQI approach is well suited to the needs and the unique processes of research compliance administration. Using the scientific method as the improvement paradigm fostered acceptance of the project by unit leaders and facilitated the development of specific improvement projects. These quality initiatives will allow us to improve support for investigators while ensuring that compliance standards continue to be met. We believe that our CQI process can readily be used in other academically based offices of research.

  4. Alternative Procedure of Heat Integration Tehnique Election between Two Unit Processes to Improve Energy Saving

    Science.gov (United States)

    Santi, S. S.; Renanto; Altway, A.

    2018-01-01

    The energy use system in a production process, in this case heat exchangers networks (HENs), is one element that plays a role in the smoothness and sustainability of the industry itself. Optimizing Heat Exchanger Networks (HENs) from process streams can have a major effect on the economic value of an industry as a whole. So the solving of design problems with heat integration becomes an important requirement. In a plant, heat integration can be carried out internally or in combination between process units. However, steps in the determination of suitable heat integration techniques require long calculations and require a long time. In this paper, we propose an alternative step in determining heat integration technique by investigating 6 hypothetical units using Pinch Analysis approach with objective function energy target and total annual cost target. The six hypothetical units consist of units A, B, C, D, E, and F, where each unit has the location of different process streams to the temperature pinch. The result is a potential heat integration (ΔH’) formula that can trim conventional steps from 7 steps to just 3 steps. While the determination of the preferred heat integration technique is to calculate the potential of heat integration (ΔH’) between the hypothetical process units. Completion of calculation using matlab language programming.

  5. Automated processing of whole blood units: operational value and in vitro quality of final blood components.

    Science.gov (United States)

    Jurado, Marisa; Algora, Manuel; Garcia-Sanchez, Félix; Vico, Santiago; Rodriguez, Eva; Perez, Sonia; Barbolla, Luz

    2012-01-01

    The Community Transfusion Centre in Madrid currently processes whole blood using a conventional procedure (Compomat, Fresenius) followed by automated processing of buffy coats with the OrbiSac system (CaridianBCT). The Atreus 3C system (CaridianBCT) automates the production of red blood cells, plasma and an interim platelet unit from a whole blood unit. Interim platelet unit are pooled to produce a transfusable platelet unit. In this study the Atreus 3C system was evaluated and compared to the routine method with regards to product quality and operational value. Over a 5-week period 810 whole blood units were processed using the Atreus 3C system. The attributes of the automated process were compared to those of the routine method by assessing productivity, space, equipment and staffing requirements. The data obtained were evaluated in order to estimate the impact of implementing the Atreus 3C system in the routine setting of the blood centre. Yield and in vitro quality of the final blood components processed with the two systems were evaluated and compared. The Atreus 3C system enabled higher throughput while requiring less space and employee time by decreasing the amount of equipment and processing time per unit of whole blood processed. Whole blood units processed on the Atreus 3C system gave a higher platelet yield, a similar amount of red blood cells and a smaller volume of plasma. These results support the conclusion that the Atreus 3C system produces blood components meeting quality requirements while providing a high operational efficiency. Implementation of the Atreus 3C system could result in a large organisational improvement.

  6. Energy- and cost-efficient lattice-QCD computations using graphics processing units

    Energy Technology Data Exchange (ETDEWEB)

    Bach, Matthias

    2014-07-01

    Quarks and gluons are the building blocks of all hadronic matter, like protons and neutrons. Their interaction is described by Quantum Chromodynamics (QCD), a theory under test by large scale experiments like the Large Hadron Collider (LHC) at CERN and in the future at the Facility for Antiproton and Ion Research (FAIR) at GSI. However, perturbative methods can only be applied to QCD for high energies. Studies from first principles are possible via a discretization onto an Euclidean space-time grid. This discretization of QCD is called Lattice QCD (LQCD) and is the only ab-initio option outside of the high-energy regime. LQCD is extremely compute and memory intensive. In particular, it is by definition always bandwidth limited. Thus - despite the complexity of LQCD applications - it led to the development of several specialized compute platforms and influenced the development of others. However, in recent years General-Purpose computation on Graphics Processing Units (GPGPU) came up as a new means for parallel computing. Contrary to machines traditionally used for LQCD, graphics processing units (GPUs) are a massmarket product. This promises advantages in both the pace at which higher-performing hardware becomes available and its price. CL2QCD is an OpenCL based implementation of LQCD using Wilson fermions that was developed within this thesis. It operates on GPUs by all major vendors as well as on central processing units (CPUs). On the AMD Radeon HD 7970 it provides the fastest double-precision D kernel for a single GPU, achieving 120GFLOPS. D - the most compute intensive kernel in LQCD simulations - is commonly used to compare LQCD platforms. This performance is enabled by an in-depth analysis of optimization techniques for bandwidth-limited codes on GPUs. Further, analysis of the communication between GPU and CPU, as well as between multiple GPUs, enables high-performance Krylov space solvers and linear scaling to multiple GPUs within a single system. LQCD

  7. Energy- and cost-efficient lattice-QCD computations using graphics processing units

    International Nuclear Information System (INIS)

    Bach, Matthias

    2014-01-01

    Quarks and gluons are the building blocks of all hadronic matter, like protons and neutrons. Their interaction is described by Quantum Chromodynamics (QCD), a theory under test by large scale experiments like the Large Hadron Collider (LHC) at CERN and in the future at the Facility for Antiproton and Ion Research (FAIR) at GSI. However, perturbative methods can only be applied to QCD for high energies. Studies from first principles are possible via a discretization onto an Euclidean space-time grid. This discretization of QCD is called Lattice QCD (LQCD) and is the only ab-initio option outside of the high-energy regime. LQCD is extremely compute and memory intensive. In particular, it is by definition always bandwidth limited. Thus - despite the complexity of LQCD applications - it led to the development of several specialized compute platforms and influenced the development of others. However, in recent years General-Purpose computation on Graphics Processing Units (GPGPU) came up as a new means for parallel computing. Contrary to machines traditionally used for LQCD, graphics processing units (GPUs) are a massmarket product. This promises advantages in both the pace at which higher-performing hardware becomes available and its price. CL2QCD is an OpenCL based implementation of LQCD using Wilson fermions that was developed within this thesis. It operates on GPUs by all major vendors as well as on central processing units (CPUs). On the AMD Radeon HD 7970 it provides the fastest double-precision D kernel for a single GPU, achieving 120GFLOPS. D - the most compute intensive kernel in LQCD simulations - is commonly used to compare LQCD platforms. This performance is enabled by an in-depth analysis of optimization techniques for bandwidth-limited codes on GPUs. Further, analysis of the communication between GPU and CPU, as well as between multiple GPUs, enables high-performance Krylov space solvers and linear scaling to multiple GPUs within a single system. LQCD

  8. The nursing professorial unit: translating acute and critical care nursing research

    Directory of Open Access Journals (Sweden)

    Martin Christensen

    2017-11-01

    Full Text Available Background and context: Implementation of current research in practice is challenging for ward-based nursing staff. However, university-based nursing academics are seen as the research experts and are perhaps well placed to support clinical nursing research. The problem lies with the divide between practice and academia; universities often use the clinical environment as the place to conduct research but this is often not translated effectively into practice. The development of a nursing professorial unit for acute and critical care was undertaken to meet this challenge. The unit’s key aim is to develop, mentor and support a nursing research culture that is wholly situated within and driven by the requirements of the clinical environment. Aim: The aim of this article is to offer some insights as to how staff set about engaging with and developing the nursing professorial unit to support nursing research in our local hospital. Conclusions: The article highlights how an effective and coordinated approach to supporting clinical nursing research is possible. The nursing professorial unit has been successful in bridging the divide between academia and practice by using a non-university approach to supporting nursing research. Instead we have adopted the philosophy that practice is the sole driver for research and as academics our role is to support that position. Implications for practice: The adoption of the nursing professorial unit model for supporting clinical nursing research is beneficial in closing the divide between clinical practice and the university The continual presence of the academics in the clinical environment has had a positive impact on research development and implementation in practice The nursing professorial unit has become an integral part of the nursing culture in the hospital environment

  9. Rock-Mechanics Research. A Survey of United States Research to 1965, with a Partial Survey of Canadian Universities.

    Science.gov (United States)

    National Academy of Sciences - National Research Council, Washington, DC.

    The results of a survey, conducted by the Committee on Rock Mechanics, to determine the status of training and research in rock mechanics in presented in this publication. In 1964 and 1965 information was gathered by questionnaires sent to industries, selected federal agencies, and universities in both the United States and Canada. Results are…

  10. Calculating the Unit Cost Factors for Decommissioning Cost Estimation of the Nuclear Research Reactor

    International Nuclear Information System (INIS)

    Jeong, Kwan Seong; Lee, Dong Gyu; Jung, Chong Hun; Lee, Kune Woo

    2006-01-01

    The estimated decommissioning cost of nuclear research reactor is calculated by applying a unit cost factor-based engineering cost calculation method on which classification of decommissioning works fitted with the features and specifications of decommissioning objects and establishment of composition factors are based. Decommissioning cost of nuclear research reactor is composed of labor cost, equipment and materials cost. Labor cost of decommissioning costs in decommissioning works are calculated on the basis of working time consumed in decommissioning objects. In this paper, the unit cost factors and work difficulty factors which are needed to calculate the labor cost in estimating decommissioning cost of nuclear research reactor are derived and figured out.

  11. Researching on the process of remote sensing video imagery

    Science.gov (United States)

    Wang, He-rao; Zheng, Xin-qi; Sun, Yi-bo; Jia, Zong-ren; Wang, He-zhan

    Unmanned air vehicle remotely-sensed imagery on the low-altitude has the advantages of higher revolution, easy-shooting, real-time accessing, etc. It's been widely used in mapping , target identification, and other fields in recent years. However, because of conditional limitation, the video images are unstable, the targets move fast, and the shooting background is complex, etc., thus it is difficult to process the video images in this situation. In other fields, especially in the field of computer vision, the researches on video images are more extensive., which is very helpful for processing the remotely-sensed imagery on the low-altitude. Based on this, this paper analyzes and summarizes amounts of video image processing achievement in different fields, including research purposes, data sources, and the pros and cons of technology. Meantime, this paper explores the technology methods more suitable for low-altitude video image processing of remote sensing.

  12. APPLICATION OF FUZZY ANALYTIC HIERARCHY PROCESS TO BUILDING RESEARCH TEAMS

    Directory of Open Access Journals (Sweden)

    Karol DĄBROWSKI

    2016-01-01

    Full Text Available Building teams has a fundamental impact for execution of research and development projects. The teams appointed for the needs of given projects are based on individuals from both inside and outside of the organization. Knowledge is not only a product available on the market but also an intangible resource affecting their internal and external processes. Thus it is vitally important for businesses and scientific research facilities to effectively manage knowledge within project teams. The article presents a proposal to use Fuzzy AHP (Analytic Hierarchy Process and ANFIS (Adaptive Neuro Fuzzy Inference System methods in working groups building for R&D projects on the basis of employees skills.

  13. Application of Fuzzy Analytic Hierarchy Process to Building Research Teams

    Science.gov (United States)

    Dąbrowski, Karol; Skrzypek, Katarzyna

    2016-03-01

    Building teams has a fundamental impact for execution of research and development projects. The teams appointed for the needs of given projects are based on individuals from both inside and outside of the organization. Knowledge is not only a product available on the market but also an intangible resource affecting their internal and external processes. Thus it is vitally important for businesses and scientific research facilities to effectively manage knowledge within project teams. The article presents a proposal to use Fuzzy AHP (Analytic Hierarchy Process) and ANFIS (Adaptive Neuro Fuzzy Inference System) methods in working groups building for R&D projects on the basis of employees skills.

  14. Automatic processing of radioimmunological research data on a computer

    International Nuclear Information System (INIS)

    Korolyuk, I.P.; Gorodenko, A.N.; Gorodenko, S.I.

    1979-01-01

    A program ''CRITEST'' in the language PL/1 for the EC computer intended for automatic processing of the results of radioimmunological research has been elaborated. The program works in the operation system of the OC EC computer and is performed in the section OC 60 kb. When compiling the program Eitken's modified algorithm was used. The program was clinically approved when determining a number of hormones: CTH, T 4 , T 3 , TSH. The automatic processing of the radioimmunological research data on the computer makes it possible to simplify the labour-consuming analysis and to raise its accuracy

  15. Relevance as process: judgements in the context of scholarly research

    Directory of Open Access Journals (Sweden)

    Theresa D. Anderson

    2005-01-01

    Full Text Available Introduction. This paper discusses how exploring the research process in-depth and over time contributes to a fuller understanding of interactions with various representations of information. Method. A longitudinal ethnographic study explored decisions made by two informants involved in scholarly research. Relevance assessment and information seeking were observed as part of informants' own ongoing research projects. Fieldwork used methods of discovery that allowed informants to shape the exploration of the practices surrounding the evolving understandings of their topics. Analysis. Inductive analysis was carried out on the qualitative data collected over a two-year period of judgements observed on a document-by-document basis. The paper introduces broad categories that point to the variability and richness of the ways that informants used representations of information resources to make relevance judgements. Results. Relevance judgements appear to be drivers of the search and research processes informants moved through during the observations. Focusing on research goals rather than on retrieval tasks brings us to a fuller understanding of the relationship between ultimate research goals and the articulation of those goals in interactions with information systems. Conclusion. Relevance assessment is a process that unfolds in the doing of a search, the making of judgements and the using of texts and representations of information.

  16. The Ispra flue gas desulphurization process: research, development and marketing aspects

    Energy Technology Data Exchange (ETDEWEB)

    Velzen, D. van (JRC, Ispra (Italy))

    1993-01-01

    The most widely used method of reducing sulphur dioxide emission is flue gas desulphurisation (FGD). The combustion gases produced by large combustion units (for example power stations) are in contact with a liquid or a slurry containing a reactant for SO[sub 2]. This operation produces a waste gas which is essentially free of sulphur dioxide. This paper describes the steps involved in the research and development of the new Ispra FGD process. Details of market consideration are also given.

  17. The Future of Nearshore Processes Research: U.S. Integrated Coastal Research Program

    Science.gov (United States)

    Elko, N.; Feddersen, F.; Foster, D. L.; Hapke, C. J.; Holman, R. A.; McNinch, J.; Mulligan, R. P.; Ozkan-Haller, H. T.; Plant, N. G.; Raubenheimer, B.

    2016-02-01

    The authors, representing the acting Nearshore Advisory Council, have developed an implementation plan for a U.S. Nearshore Research Program based on the 2015 Future of Nearshore Processes report that was authored by the nearshore community. The objectives of the plan are to link research programs across federal agencies, NGOs, industry, and academia into an integrated national program and to increase academic and NGO participation in federal agency nearshore processes research. A primary recommendation is interagency collaboration to build a research program that will coordinate and fund U.S. nearshore processes research across three broad research themes: 1) long-term coastal evolution due to natural and anthropogenic processes; 2) extreme events; and 3) physical, biological and chemical processes impacting human and ecosystem health. The plan calls for a new program to be developed by an executive committee of federal agency leaders, NGOs, and an academic representative, created similarly to the existing NOPP program. This leadership will be established prior to the 2016 Ocean Sciences meeting and will have agreed on responsibilities and a schedule for development of the research program. To begin to understand the scope of today's U.S. coastal research investment, a survey was distributed to ten federal agency R&D program heads. Six of the ten agencies indicated that they fund coastal research, with a combined annual coastal research budget of nearly 100 million (NSF has not responded). The priority of the three research themes were ranked nearly equally and potential research support ranged from 15-19 million for each theme, with approximately 12 million as direct contribution to academic research. Beyond addressing our fundamental science questions, it is critical that the nearshore community stay organized to represent academic interests on the new executive committee. The program goal is the integration of academic, NGO, and federal agencies.

  18. Quality Improvement Process in a Large Intensive Care Unit: Structure and Outcomes.

    Science.gov (United States)

    Reddy, Anita J; Guzman, Jorge A

    2016-11-01

    Quality improvement in the health care setting is a complex process, and even more so in the critical care environment. The development of intensive care unit process measures and quality improvement strategies are associated with improved outcomes, but should be individualized to each medical center as structure and culture can differ from institution to institution. The purpose of this report is to describe the structure of quality improvement processes within a large medical intensive care unit while using examples of the study institution's successes and challenges in the areas of stat antibiotic administration, reduction in blood product waste, central line-associated bloodstream infections, and medication errors. © The Author(s) 2015.

  19. Youth researching youth: benefits, limitations and ethical considerations within a participatory research process

    Directory of Open Access Journals (Sweden)

    Cynthia G. Jardine

    2012-05-01

    Full Text Available Objectives. To examine the benefits, limitations and ethical issues associated with conducting participatory research on tobacco use using youth to research other youth. Study design. Community-based participatory research. Methods. Research on tobacco use was conducted with students in the K’àlemì Dene School and Kaw Tay Whee School in the Northwest Territories, Canada, using PhotoVoice. The Grade 9–12 students acted as researchers. Researcher reflections and observations were assessed using “member checking,” whereby students, teachers and community partners could agree or disagree with the researcher's interpretation. The students and teachers were further asked informally to share their own reflections and observations on this process. Results and conclusions. Using youth to research other youth within a participatory research framework had many benefits for the quality of the research, the youth researchers and the community. The research was perceived by the researchers and participants to be more valid and credible. The approach was more appropriate for the students, and the youth researchers gained valuable research experience and a sense of ownership of both the research process and results. Viewing smoking through their children's eyes was seen by the community to be a powerful and effective means of creating awareness of the community environment. Limitations of the approach were residual response bias of participants, the short period of time to conduct the research and failure to fully explore student motivations to smoke or not to smoke. Ethical considerations included conducting research with minors, difficulties in obtaining written parental consent, decisions on cameras (disposable versus digital and representation of all participants in the final research product.

  20. FFUSION yearbook 1997. Annual report of the Finnish fusion research unit. Association EURATOM-TEKES

    Energy Technology Data Exchange (ETDEWEB)

    Karttunen, S; Paettikangas, T [eds.; VTT Energy, Espoo (Finland)

    1998-02-01

    Finnish fusion programme (FFUSION) is one of the eleven national energy research programmes funded by the Technological Development Centre of Finland (TEKES). The FFUSION programme was fully integrated into European Fusion Programme just after Finland joined the European Union. The contract of Association Euratom and Tekes was signed in 1995 and extends to the end of 1999. Finland became a member of JET Joint Undertaking in 1996, other contracts with Euratom include NET agreement and the Staff Mobility Agreement. FFUSION programme with participating research institutes and universities forms the Fusion Research Unit of the Association Euratom-Tekes. This annual report summarises the research activities of the Finnish Research Unit in 1997. The programme consists of two parts: Physics and Technology. The research areas of the physics are: Fusion plasma engineering, and Radio-frequency heating and Plasma diagnostics. The technology is focused into three areas: Fusion reactor materials (first wall components and joining techniques), Remote handling and viewing systems, and Superconductors

  1. Refining the Enrolment Process in Emergency Medicine Research.

    Science.gov (United States)

    Sahan, Kate M; Channon, Keith M; Choudhury, Robin P; Kharbanda, Rajesh K; Lee, Regent; Sheehan, Mark

    2016-04-01

    Research in the emergency setting involving patients with acute clinical conditions is needed if there are to be advances in diagnosis and treatment. But research in these areas poses ethical and practical challenges. One of these is the general inability to obtain informed consent due to the patient's lack of mental capacity and insufficient time to contact legal representatives. Regulatory frameworks which allow this research to proceed with a consent 'waiver', provided patients lack mental capacity, miss important ethical subtleties. One of these is the varying nature of mental capacity among emergency medicine patients. Not only is their capacity variable and often unclear, but some patients are also likely to be able to engage with the researcher and the context to varying degrees. In this paper we describe the key elements of a novel enrolment process for emergency medicine research that refines the consent waiver and fully engages with the ethical rationale for consent and, in this context, its waiver. The process is verbal but independently documented during the 'emergent' stages of the research. It provides appropriate engagement with the patient, is context-sensitive and better addresses ethical subtleties. In line with regulation, full written consent for on-going participation in the research is obtained once the emergency is passed.

  2. Partnering with Indigenous student co-researchers: improving research processes and outcomes.

    Science.gov (United States)

    Genuis, Shelagh K; Willows, Noreen; Jardine, Cindy G

    2015-01-01

    To examine the contribution of student co-researchers to a community-based participatory Photovoice investigation of Indigenous children's food-related lived experience. We examine co-researchers' contributions to the research process, their role in knowledge co-generation and dissemination, and factors that fostered research partnership with the teenage co-researchers. High school students attending a First Nation community school in Canada were trained as research partners. They contributed to aspects of research design, conducted interviews with grades 3 and 4 Photovoice participants, and participated in data analysis and the development of a culturally relevant photobook. The study was initiated by the community's research committee. It is informed by critical consciousness theory and the positive youth development framework. Student co-researchers incorporated culturally appropriate strategies as they interviewed participants. Co-researchers adopted conversational approaches, built rapport by articulating personal and cultural connections, and engaged in mentoring and health promotion as they interviewed participants. They made critical contributions to dissemination by developing photobook content that promoted the importance of traditional foods and the vital role of family and community in healthy eating practices. Relationships and "dialogic" space were important to building partnership with and promoting capacity development among youth co-researchers. Partnership between university researchers and Indigenous student co-researchers holds great promise for health promotion in communities. Co-researchers developed research and leadership skills, gained understanding of health challenges facing their community, and initiated health and cultural promotion through the project's Photobook. This investigation supports the powerful potential of student co-researchers to meaningfully contribute to research processes and to build knowledge that is relevant and

  3. Conceptual Frameworks in the Doctoral Research Process: A Pedagogical Model

    Science.gov (United States)

    Berman, Jeanette; Smyth, Robyn

    2015-01-01

    This paper contributes to consideration of the role of conceptual frameworks in the doctoral research process. Through reflection on the two authors' own conceptual frameworks for their doctoral studies, a pedagogical model has been developed. The model posits the development of a conceptual framework as a core element of the doctoral…

  4. The Effect and Importance of Technology in the Research Process

    Science.gov (United States)

    Cuff, Ed

    2014-01-01

    From elementary schooling to doctoral-level education, technology has become an integral part of the learning process in and out of the classroom. With the implementation of the Common Core Learning Standards, the skills required for research are more valuable than ever, for they are required to succeed in a college setting, as well as in the…

  5. External Influences on an Internal Process: Supporting Preservice Teacher Research

    Science.gov (United States)

    Schulte, Ann; Klipfel, Lyndsay Halpin

    2016-01-01

    In an effort to better understand how participating in teacher research as a student teacher compares to conducting it as a practicing teacher, a teacher educator and her former teacher education student engaged in a collaborative dialogue. They focus their reflections in this article on the impact of external forces on the process of teacher…

  6. Making Research Matter Comment on "Public Spending on Health Service and Policy Research in Canada, the United Kingdom, and the United States: A Modest Proposal".

    Science.gov (United States)

    Hunter, David J; Frank, John

    2017-08-13

    We offer a UK-based commentary on the recent "Perspective" published in IJHPM by Thakkar and Sullivan. We are sympathetic to the authors' call for increased funding for health service and policy research (HSPR). However, we point out that increasing that investment - in any of the three countries they compare: Canada, the United States and the United Kingdom- will ipso facto not necessarily lead to any better use of research by health system decision-makers in these settings. We cite previous authors' descriptions of the many factors that tend to make the worlds of researchers and decision-makers into "two solitudes." And we call for changes in the structure and funding of HSPR, particularly the incentives now in place for purely academic publishing, to tackle a widespread reality: most published research in HSPR, as in other applied fields of science, is never read or used by the vast majority of decision-makers, working out in the "real world. © 2018 The Author(s); Published by Kerman University of Medical Sciences. This is an open-access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

  7. Cooperative Fish and Wildlife Research Units Program—2017 year in review

    Science.gov (United States)

    Organ, John F.; Thompson, John D.; Dennerline, Donald E.; Childs, Dawn E.

    2018-02-08

    The Cooperative Fish and Wildlife Research Units Program was involved in a number of notable events during 2017, many concerning our personnel. Dr. Barry Grand left his position as Leader of the Alabama Cooperative Fish and Wildlife Research Unit to become the Cooperative Units Program Supervisor for the South, replacing Dr. Kevin Whalen who took over as Supervisor for the West. We welcomed Dr. Sarah Converse who left the Patuxent Wildlife Research Center to become Leader of the Washington Cooperative Fish and Wildlife Research Unit. Dr. Amanda Rosenberger joined the Tennessee Cooperative Fishery Research Unit as Assistant Leader, transferring from the Missouri Cooperative Unit. Dr. Scott Carleton left his position as Assistant Unit Leader in New Mexico to become Chief of the Region 2 Migratory Bird Program of the U.S. Fish and Wildlife Service.We said farewell to many colleagues who retired. Their departure is bittersweet as we wish them health, happiness, and wellness in retirement. We will miss their companionship and the extraordinary contributions they have made to the Cooperative Fish and Wildlife Research Units Program and conservation.The Cooperative Fish and Wildlife Research Units Program has a record high number of vacant scientist positions due to a combination of retirements and base funding short-falls. These issues are affecting our ability to meet cooperator needs. Yet, we remain highly productive. For example, this year we released a report (https://doi.org/10.3133/cir1427) containing abstracts of nearly 600 of our research projects, covering thematic areas ranging from advanced technologies to wildlife diseases. We provided highly competent, trained scientists and natural resource managers for our cooperators’ workforce. We delivered technical training and guidance to professional practitioners. We provided critical information to cooperators for decisions on species status assessments and management of species of greatest conservation need

  8. Unit Process Wetlands for Removal of Trace Organic Contaminants and Pathogens from Municipal Wastewater Effluents

    Science.gov (United States)

    Jasper, Justin T.; Nguyen, Mi T.; Jones, Zackary L.; Ismail, Niveen S.; Sedlak, David L.; Sharp, Jonathan O.; Luthy, Richard G.; Horne, Alex J.; Nelson, Kara L.

    2013-01-01

    Abstract Treatment wetlands have become an attractive option for the removal of nutrients from municipal wastewater effluents due to their low energy requirements and operational costs, as well as the ancillary benefits they provide, including creating aesthetically appealing spaces and wildlife habitats. Treatment wetlands also hold promise as a means of removing other wastewater-derived contaminants, such as trace organic contaminants and pathogens. However, concerns about variations in treatment efficacy of these pollutants, coupled with an incomplete mechanistic understanding of their removal in wetlands, hinder the widespread adoption of constructed wetlands for these two classes of contaminants. A better understanding is needed so that wetlands as a unit process can be designed for their removal, with individual wetland cells optimized for the removal of specific contaminants, and connected in series or integrated with other engineered or natural treatment processes. In this article, removal mechanisms of trace organic contaminants and pathogens are reviewed, including sorption and sedimentation, biotransformation and predation, photolysis and photoinactivation, and remaining knowledge gaps are identified. In addition, suggestions are provided for how these treatment mechanisms can be enhanced in commonly employed unit process wetland cells or how they might be harnessed in novel unit process cells. It is hoped that application of the unit process concept to a wider range of contaminants will lead to more widespread application of wetland treatment trains as components of urban water infrastructure in the United States and around the globe. PMID:23983451

  9. Unit Process Wetlands for Removal of Trace Organic Contaminants and Pathogens from Municipal Wastewater Effluents.

    Science.gov (United States)

    Jasper, Justin T; Nguyen, Mi T; Jones, Zackary L; Ismail, Niveen S; Sedlak, David L; Sharp, Jonathan O; Luthy, Richard G; Horne, Alex J; Nelson, Kara L

    2013-08-01

    Treatment wetlands have become an attractive option for the removal of nutrients from municipal wastewater effluents due to their low energy requirements and operational costs, as well as the ancillary benefits they provide, including creating aesthetically appealing spaces and wildlife habitats. Treatment wetlands also hold promise as a means of removing other wastewater-derived contaminants, such as trace organic contaminants and pathogens. However, concerns about variations in treatment efficacy of these pollutants, coupled with an incomplete mechanistic understanding of their removal in wetlands, hinder the widespread adoption of constructed wetlands for these two classes of contaminants. A better understanding is needed so that wetlands as a unit process can be designed for their removal, with individual wetland cells optimized for the removal of specific contaminants, and connected in series or integrated with other engineered or natural treatment processes. In this article, removal mechanisms of trace organic contaminants and pathogens are reviewed, including sorption and sedimentation, biotransformation and predation, photolysis and photoinactivation, and remaining knowledge gaps are identified. In addition, suggestions are provided for how these treatment mechanisms can be enhanced in commonly employed unit process wetland cells or how they might be harnessed in novel unit process cells. It is hoped that application of the unit process concept to a wider range of contaminants will lead to more widespread application of wetland treatment trains as components of urban water infrastructure in the United States and around the globe.

  10. A systematic review evaluating the role of nurses and processes for delivering early mobility interventions in the intensive care unit.

    Science.gov (United States)

    Krupp, Anna; Steege, Linsey; King, Barbara

    2018-04-19

    To investigate processes for delivering early mobility interventions in adult intensive care unit patients used in research and quality improvement studies and the role of nurses in early mobility interventions. A systematic review was conducted. Electronic databases PubMED, CINAHL, PEDro, and Cochrane were searched for studies published from 2000 to June 2017 that implemented an early mobility intervention in adult intensive care units. Included studies involved progression to ambulation as a component of the intervention, included the role of the nurse in preparing for or delivering the intervention, and reported at least one patient or organisational outcome measure. The System Engineering Initiative for Patient Safety (SEIPS) model, a framework for understanding structure, processes, and healthcare outcomes, was used to evaluate studies. 25 studies were included in the final review. Studies consisted of randomised control trials, prospective, retrospective, or mixed designs. A range of processes to support the delivery of early mobility were found. These processes include forming interdisciplinary teams, increasing mobility staff, mobility protocols, interdisciplinary education, champions, communication, and feedback. Variation exists in the process of delivering early mobility in the intensive care unit. In particular, further rigorous studies are needed to better understand the role of nurses in implementing early mobility to maintain a patient's functional status. Copyright © 2018 Elsevier Ltd. All rights reserved.

  11. Process control and product evaluation in micro molding using a screwless/two-plunger injection unit

    DEFF Research Database (Denmark)

    Tosello, Guido; Hansen, Hans Nørgaard; Dormann, B.

    2010-01-01

    A newly developed μ-injection molding machine equipped with a screwless/two-plunger injection unit has been employed to mould miniaturized dog-bone shaped specimens on polyoxymethylene and its process capability and robustness have been analyzed. The influence of process parameters on μ-injection......A newly developed μ-injection molding machine equipped with a screwless/two-plunger injection unit has been employed to mould miniaturized dog-bone shaped specimens on polyoxymethylene and its process capability and robustness have been analyzed. The influence of process parameters on μ......-injection molding was investigated using the Design of Experiments technique. Injection pressure and piston stroke speed as well as part weight and dimensions were considered as quality factors over a wide range of process parameters. Experimental results obtained under different processing conditions were...

  12. Improving industrial designers work process by involving user research

    DEFF Research Database (Denmark)

    Dai, Zheng; Ómarsson, Ólafur

    2011-01-01

    With changing times, new technologies and more opinionated consumers, the modern industrial designer has found himself in need of fresher and more up to date approaches in his daily work. In a fast moving industry, the designer needs to keep a thinking process of dynamic and subjective attitude...... will give the grounding for believing that the industrial designer needs to adopt user research methods to a level where he can still continue to work under the very nature of industrial design that has made it a successful practice for the last century. The combing of the approaches and attitude will help....... User research is part of user centered design (UCD). UCD has a reputation for subjective and reflective practice. In this paper there are two example cases. One is conducted by a classical industrial design process, and another is costing half of energy and time in user research. These examples...

  13. Partnering with Indigenous student co-researchers: improving research processes and outcomes

    Directory of Open Access Journals (Sweden)

    Shelagh K. Genuis

    2015-07-01

    Full Text Available Objective: To examine the contribution of student co-researchers to a community-based participatory Photovoice investigation of Indigenous children's food-related lived experience. We examine co-researchers’ contributions to the research process, their role in knowledge co-generation and dissemination, and factors that fostered research partnership with the teenage co-researchers. Methods: High school students attending a First Nation community school in Canada were trained as research partners. They contributed to aspects of research design, conducted interviews with grades 3 and 4 Photovoice participants, and participated in data analysis and the development of a culturally relevant photobook. The study was initiated by the community's research committee. It is informed by critical consciousness theory and the positive youth development framework. Results: Student co-researchers incorporated culturally appropriate strategies as they interviewed participants. Co-researchers adopted conversational approaches, built rapport by articulating personal and cultural connections, and engaged in mentoring and health promotion as they interviewed participants. They made critical contributions to dissemination by developing photobook content that promoted the importance of traditional foods and the vital role of family and community in healthy eating practices. Relationships and “dialogic” space were important to building partnership with and promoting capacity development among youth co-researchers. Conclusions: Partnership between university researchers and Indigenous student co-researchers holds great promise for health promotion in communities. Co-researchers developed research and leadership skills, gained understanding of health challenges facing their community, and initiated health and cultural promotion through the project's Photobook. This investigation supports the powerful potential of student co-researchers to meaningfully contribute to

  14. Comparison of ultrafiltration and dissolved air flotation efficiencies in industrial units during the papermaking process

    OpenAIRE

    Monte Lara, Concepción; Ordóñez Sanz, Ruth; Hermosilla Redondo, Daphne; Sánchez González, Mónica; Blanco Suárez, Ángeles

    2011-01-01

    The efficiency of an ultrafiltration unit has been studied and compared with a dissolved air flotation system to get water with a suited quality to be reused in the process. The study was done at a paper mill producing light weight coated paper and newsprint paper from 100% recovered paper. Efficiency was analysed by removal of turbidity, cationic demand, total and dissolved chemical oxygen demand, hardness, sulphates and microstickies. Moreover, the performance of the ultrafiltration unit an...

  15. Computerized nursing process in the Intensive Care Unit: ergonomics and usability

    OpenAIRE

    Almeida,Sônia Regina Wagner de; Sasso,Grace Teresinha Marcon Dal; Barra,Daniela Couto Carvalho

    2016-01-01

    Abstract OBJECTIVE Analyzing the ergonomics and usability criteria of the Computerized Nursing Process based on the International Classification for Nursing Practice in the Intensive Care Unit according to International Organization for Standardization(ISO). METHOD A quantitative, quasi-experimental, before-and-after study with a sample of 16 participants performed in an Intensive Care Unit. Data collection was performed through the application of five simulated clinical cases and an evalua...

  16. Test results of the signal processing and amplifier unit for the emittance measurement system

    International Nuclear Information System (INIS)

    Stawiszynski, L.; Schneider, S.

    1984-01-01

    The signal processing and amplifier unit for the emittance measurement system is the unit with which the beam current on the harp-wires and the slit is measured and converted to a digital output. Temperature effects are very critical at low currents and the purpose of the test measurements described in this report was mainly to establish the accuracy and repeatability of the measurements under the influence of temperature variations

  17. United States Department of Agriculture-Agricultural Research Service research in application technology for pest management.

    Science.gov (United States)

    Smith, L A; Thomson, S J

    2003-01-01

    A research summary is presented that emphasizes ARS achievements in application technology over the past 2-3 years. Research focused on the improvement of agricultural pesticide application is important from the standpoint of crop protection as well as environmental safety. Application technology research is being actively pursued within the ARS, with a primary focus on application system development, drift management, efficacy enhancement and remote sensing. Research on application systems has included sensor-controlled hooded sprayers, new approaches to direct chemical injection, and aerial electrostatic sprayers. For aerial application, great improvements in on-board flow controllers permit accurate field application of chemicals. Aircraft parameters such as boom position and spray release height are being altered to determine their effect on drift. Other drift management research has focused on testing of low-drift nozzles, evaluation of pulsed spray technologies and evaluation of drift control adjuvants. Research on the use of air curtain sprayers in orchards, air-assist sprayers for row crops and vegetables, and air deflectors on aircraft has documented improvements in application efficacy. Research has shown that the fate of applied chemicals is influenced by soil properties, and this has implications for herbicide efficacy and dissipation in the environment. Remote sensing systems are being used to target areas in the field where pests are present so that spray can be directed to only those areas. Soil and crop conditions influence propensity for weeds and insects to proliferate in any given field area. Research has indicated distinct field patterns favorable for weed growth and insect concentration, which can provide further assistance for targeted spraying.

  18. Turning health research into health promotion: a study of causality and 'critical insights' in a United Kingdom health campaign.

    Science.gov (United States)

    Piggin, Joe

    2012-10-01

    This article examines how important decisions about health can alter between public health policy formulation and eventual marketing implementation. Specifically, the article traces the development and production of a major United Kingdom social marketing campaign named Change4Life, and examines how ideas about the causes of and solutions to the obesity epidemic are produced in differing ways throughout the health promotion process. This study examines a variety of United Kingdom health research, policy, marketing strategy and marketing messages between 2008 and 2011. This research demonstrates that claims about causality oscillate and alter throughout the research, policy and Change4Life marketing process. These oscillations are problematic, since the Department of Health described the original consumer research as 'critical'. Given both the importance of the health issues being addressed and the amount of funding dedicated to Change4Life, that 'critical' research was directly contradicted in the campaign requires urgent review. To conclude, the article discusses the utility of social marketing when considering causal claims in health promotion. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.

  19. The Process and Impact of Stakeholder Engagement in Developing a Pediatric Intensive Care Unit Communication and Decision-Making Intervention.

    Science.gov (United States)

    Michelson, Kelly N; Frader, Joel; Sorce, Lauren; Clayman, Marla L; Persell, Stephen D; Fragen, Patricia; Ciolino, Jody D; Campbell, Laura C; Arenson, Melanie; Aniciete, Danica Y; Brown, Melanie L; Ali, Farah N; White, Douglas

    2016-12-01

    Stakeholder-developed interventions are needed to support pediatric intensive care unit (PICU) communication and decision-making. Few publications delineate methods and outcomes of stakeholder engagement in research. We describe the process and impact of stakeholder engagement on developing a PICU communication and decision-making support intervention. We also describe the resultant intervention. Stakeholders included parents of PICU patients, healthcare team members (HTMs), and research experts. Through a year-long iterative process, we involved 96 stakeholders in 25 meetings and 26 focus groups or interviews. Stakeholders adapted an adult navigator model by identifying core intervention elements and then determining how to operationalize those core elements in pediatrics. The stakeholder input led to PICU-specific refinements, such as supporting transitions after PICU discharge and including ancillary tools. The resultant intervention includes navigator involvement with parents and HTMs and navigator-guided use of ancillary tools. Subsequent research will test the feasibility and efficacy of our intervention.

  20. The Process and Impact of Stakeholder Engagement in Developing a Pediatric Intensive Care Unit Communication and Decision-Making Intervention

    Science.gov (United States)

    Frader, Joel; Sorce, Lauren; Clayman, Marla L; Persell, Stephen D; Fragen, Patricia; Ciolino, Jody D; Campbell, Laura C; Arenson, Melanie; Aniciete, Danica Y; Brown, Melanie L; Ali, Farah N; White, Douglas

    2016-01-01

    Stakeholder-developed interventions are needed to support pediatric intensive care unit (PICU) communication and decision-making. Few publications delineate methods and outcomes of stakeholder engagement in research. We describe the process and impact of stakeholder engagement on developing a PICU communication and decision-making support intervention. We also describe the resultant intervention. Stakeholders included parents of PICU patients, healthcare team members (HTMs), and research experts. Through a year-long iterative process, we involved 96 stakeholders in 25 meetings and 26 focus groups or interviews. Stakeholders adapted an adult navigator model by identifying core intervention elements and then determining how to operationalize those core elements in pediatrics. The stakeholder input led to PICU-specific refinements, such as supporting transitions after PICU discharge and including ancillary tools. The resultant intervention includes navigator involvement with parents and HTMs and navigator-guided use of ancillary tools. Subsequent research will test the feasibility and efficacy of our intervention. PMID:28725847

  1. Current researches on safety assessment of radioactive waste disposal in the United States

    International Nuclear Information System (INIS)

    Tasaka, Hiroshi; Kiyose, Ryohei

    1980-01-01

    Recently, the problem of safe disposal of radioactive waste generated from nuclear fuel cycle becomes more important in Japan. On the other hand, many researches on shallow land burial of low-level wastes and geologic isolation of high-level wastes have been carried out in the United States of America. In this report, the researches on the safety assessment of radioactive waste disposal in the United States of America were briefly introduced with emphasis on the studies on behavior and migration of radionuclide from disposed waste in geosphere. (author)

  2. The United States Culture Collection Network (USCCN): Enhancing Microbial Genomics Research through Living Microbe Culture Collections

    Science.gov (United States)

    Boundy-Mills, Kyria; Hess, Matthias; Bennett, A. Rick; Ryan, Matthew; Kang, Seogchan; Nobles, David; Eisen, Jonathan A.; Inderbitzin, Patrik; Sitepu, Irnayuli R.; Torok, Tamas; Brown, Daniel R.; Cho, Juliana; Wertz, John E.; Mukherjee, Supratim; Cady, Sherry L.

    2015-01-01

    The mission of the United States Culture Collection Network (USCCN; http://usccn.org) is “to facilitate the safe and responsible utilization of microbial resources for research, education, industry, medicine, and agriculture for the betterment of human kind.” Microbial culture collections are a key component of life science research, biotechnology, and emerging global biobased economies. Representatives and users of several microbial culture collections from the United States and Europe gathered at the University of California, Davis, to discuss how collections of microorganisms can better serve users and stakeholders and to showcase existing resources available in public culture collections. PMID:26092453

  3. A Review of Underground Coal Gasification Research and Development in the United States

    Energy Technology Data Exchange (ETDEWEB)

    Camp, D. W. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2017-06-26

    An intense and productive period of research and development on underground coal gasification (UCG) took place in the United States from the mid-1970’s through the late 1980’s. It began with the translation and review of Soviet literature and ended with the Rocky Mountain 1 field test. This demonstrated the feasibility of newly-developed technologies that form the basis of many UCG projects around the world today. This period began with little domestic understanding of UCG and ended with an accurate observation-based conceptual model and a corresponding predictive multi-physics mathematical model of the process. The many accomplishments of this period form the main content of this report. This report also covers recent U.S. activities and accomplishments during the period 2004-2015, and touches briefly on the Bureau of Mines efforts between 1948 and 1963. Most of the activities were funded by the United States Department of Energy and its predecessors. While private/commercially-funded activities are reviewed here, the emphasis is on government-funded work. It has a much greater extent of publicly available reports and papers, and they generally contain much greater technical detail. Field tests were the marquis activities around which an integrated multi-faceted program was built. These are described in detail in Section 4. Highlights from modeling efforts are briefly covered, as the program was integrated and well-rounded, with field results informing models and vice-versa. The primary goal of this report is to review what has been learned about UCG from the U.S. experience in aggregate. This includes observations, conclusions, lessons-learned, phenomena understood, and technology developed. The latter sections of this report review these things.

  4. Semantic processing of EHR data for clinical research.

    Science.gov (United States)

    Sun, Hong; Depraetere, Kristof; De Roo, Jos; Mels, Giovanni; De Vloed, Boris; Twagirumukiza, Marc; Colaert, Dirk

    2015-12-01

    There is a growing need to semantically process and integrate clinical data from different sources for clinical research. This paper presents an approach to integrate EHRs from heterogeneous resources and generate integrated data in different data formats or semantics to support various clinical research applications. The proposed approach builds semantic data virtualization layers on top of data sources, which generate data in the requested semantics or formats on demand. This approach avoids upfront dumping to and synchronizing of the data with various representations. Data from different EHR systems are first mapped to RDF data with source semantics, and then converted to representations with harmonized domain semantics where domain ontologies and terminologies are used to improve reusability. It is also possible to further convert data to application semantics and store the converted results in clinical research databases, e.g. i2b2, OMOP, to support different clinical research settings. Semantic conversions between different representations are explicitly expressed using N3 rules and executed by an N3 Reasoner (EYE), which can also generate proofs of the conversion processes. The solution presented in this paper has been applied to real-world applications that process large scale EHR data. Copyright © 2015 Elsevier Inc. All rights reserved.

  5. The systematic review as a research process in music therapy.

    Science.gov (United States)

    Hanson-Abromeit, Deanna; Sena Moore, Kimberly

    2014-01-01

    Music therapists are challenged to present evidence on the efficacy of music therapy treatment and incorporate the best available research evidence to make informed healthcare and treatment decisions. Higher standards of evidence can come from a variety of sources including systematic reviews. To define and describe a range of research review methods using examples from music therapy and related literature, with emphasis on the systematic review. In addition, the authors provide a detailed overview of methodological processes for conducting and reporting systematic reviews in music therapy. The systematic review process is described in five steps. Step 1 identifies the research plan and operationalized research question(s). Step 2 illustrates the identification and organization of the existing literature related to the question(s). Step 3 details coding of data extracted from the literature. Step 4 explains the synthesis of coded findings and analysis to answer the research question(s). Step 5 describes the strength of evidence evaluation and results presentation for practice recommendations. Music therapists are encouraged to develop and conduct systematic reviews. This methodology contributes to review outcome credibility and can determine how information is interpreted and used by clinicians, clients or patients, and policy makers. A systematic review is a methodologically rigorous research method used to organize and evaluate extant literature related to a clinical problem. Systematic reviews can assist music therapists in managing the ever-increasing literature, making well-informed evidence based practice and research decisions, and translating existing music-based and nonmusic based literature to clinical practice and research development. © the American Music Therapy Association 2014. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  6. The role of atomic and molecular processes in fusion research

    International Nuclear Information System (INIS)

    Harrison, M.F.A.

    1977-01-01

    This paper considers the relevance of atomic and molecular processes to research into controlled nuclear fusion and in particular their effects upon the magnetically confined plasma in Tokamak experiments and conceptual Tokamak reactors. The relative significance of collective phenomena and of single particle collisions to both plasma heating and loss processes are discussed and the pertinent principles of plasma refuelling and plasma diagnostics are outlined. The methods by which atomic and molecular data are applied to these problems, the contributing effects of surface interactions and the consequent implications upon the accuracy and the type of data needed are described in a qualitative manner. Whilst particular atomic and molecular processes are not discussed in detail, sufficient information is given of the physical environments of Tokamak devices for significant processes to be self evident. (author)

  7. The Applied Meteorology Unit: Nineteen Years Successfully Transitioning Research into Operations for America's Space Program

    Science.gov (United States)

    Madura, John T.; Bauman, William H.; Merceret, Francis J.; Roeder, William P.; Brody, Frank C.; Hagemeyer, Bartlett C.

    2010-01-01

    The Applied Meteorology Unit (AMU) provides technology transition and technique development to improve operational weather support to the Space Shuttle and the entire American space program. The AMU is funded and managed by NASA and operated by a contractor that provides five meteorologists with a diverse mix of advanced degrees, operational experience, and associated skills including data processing, statistics, and the development of graphical user interfaces. The AMU's primary customers are the U.S. Air Force 45th Weather Squadron at Patrick Air Force Base, the National Weather Service Spaceflight Meteorology Group at NASA Johnson Space Center, and the National Weather Service Melbourne FL Forecast Office. The AMU has transitioned research into operations for nineteen years and worked on a wide range of topics, including new forecasting techniques for lightning probability, synoptic peak winds,.convective winds, and summer severe weather; satellite tools to predict anvil cloud trajectories and evaluate camera line of sight for Space Shuttle launch; optimized radar scan strategies; evaluated and implemented local numerical models; evaluated weather sensors; and many more. The AMU has completed 113 projects with 5 more scheduled to be completed by the end of 2010. During this rich history, the AMU and its customers have learned many lessons on how to effectively transition research into operations. Some of these lessons learned include collocating with the operational customer and periodically visiting geographically separated customers, operator submitted projects, consensus tasking process, use of operator primary advocates for each project, customer AMU liaisons with experience in both operations and research, flexibility in adapting the project plan based on lessons learned during the project, and incorporating training and other transition assistance into the project plans. Operator involvement has been critical to the AMU's remarkable success and many awards

  8. Massively Parallel Signal Processing using the Graphics Processing Unit for Real-Time Brain-Computer Interface Feature Extraction.

    Science.gov (United States)

    Wilson, J Adam; Williams, Justin C

    2009-01-01

    The clock speeds of modern computer processors have nearly plateaued in the past 5 years. Consequently, neural prosthetic systems that rely on processing large quantities of data in a short period of time face a bottleneck, in that it may not be possible to process all of the data recorded from an electrode array with high channel counts and bandwidth, such as electrocorticographic grids or other implantable systems. Therefore, in this study a method of using the processing capabilities of a graphics card [graphics processing unit (GPU)] was developed for real-time neural signal processing of a brain-computer interface (BCI). The NVIDIA CUDA system was used to offload processing to the GPU, which is capable of running many operations in parallel, potentially greatly increasing the speed of existing algorithms. The BCI system records many channels of data, which are processed and translated into a control signal, such as the movement of a computer cursor. This signal processing chain involves computing a matrix-matrix multiplication (i.e., a spatial filter), followed by calculating the power spectral density on every channel using an auto-regressive method, and finally classifying appropriate features for control. In this study, the first two computationally intensive steps were implemented on the GPU, and the speed was compared to both the current implementation and a central processing unit-based implementation that uses multi-threading. Significant performance gains were obtained with GPU processing: the current implementation processed 1000 channels of 250 ms in 933 ms, while the new GPU method took only 27 ms, an improvement of nearly 35 times.

  9. NUMATH: a nuclear-material-holdup estimator for unit operations and chemical processes

    International Nuclear Information System (INIS)

    Krichinsky, A.M.

    1981-01-01

    A computer program, NUMATH (Nuclear Material Holdup Estimator), has been developed to permit inventory estimation in vessels involved in unit operations and chemical processes. This program has been implemented in an operating nuclear fuel processing plant. NUMATH's purpose is to provide steady-state composition estimates for material residing in process vessels until representative samples can be obtained and chemical analyses can be performed. Since these compositions are used for inventory estimation, the results are determined for and cataloged in container-oriented files. The estimated compositions represent material collected in applicable vessels-including consideration for material previously acknowledged in these vessels. The program utilizes process measurements and simple material balance models to estimate material holdups and distribution within unit operations. During simulated run testing, NUMATH-estimated inventories typically produced material balances within 7% of the associated measured material balances for uranium and within 16% of the associated, measured material balance for thorium during steady-state process operation

  10. Modification and Validation of an Automotive Data Processing Unit, Compessed Video System, and Communications Equipment

    Energy Technology Data Exchange (ETDEWEB)

    Carter, R.J.

    1997-04-01

    The primary purpose of the "modification and validation of an automotive data processing unit (DPU), compressed video system, and communications equipment" cooperative research and development agreement (CRADA) was to modify and validate both hardware and software, developed by Scientific Atlanta, Incorporated (S-A) for defense applications (e.g., rotary-wing airplanes), for the commercial sector surface transportation domain (i.e., automobiles and trucks). S-A also furnished a state-of-the-art compressed video digital storage and retrieval system (CVDSRS), and off-the-shelf data storage and transmission equipment to support the data acquisition system for crash avoidance research (DASCAR) project conducted by Oak Ridge National Laboratory (ORNL). In turn, S-A received access to hardware and technology related to DASCAR. DASCAR was subsequently removed completely and installation was repeated a number of times to gain an accurate idea of complete installation, operation, and removal of DASCAR. Upon satisfactory completion of the DASCAR construction and preliminary shakedown, ORNL provided NHTSA with an operational demonstration of DASCAR at their East Liberty, OH test facility. The demonstration included an on-the-road demonstration of the entire data acquisition system using NHTSA'S test track. In addition, the demonstration also consisted of a briefing, containing the following: ORNL generated a plan for validating the prototype data acquisition system with regard to: removal of DASCAR from an existing vehicle, and installation and calibration in other vehicles; reliability of the sensors and systems; data collection and transmission process (data integrity); impact on the drivability of the vehicle and obtrusiveness of the system to the driver; data analysis procedures; conspicuousness of the vehicle to other drivers; and DASCAR installation and removal training and documentation. In order to identify any operational problems not captured by the systems

  11. Salamander chytrid fungus (Batrachochytrium salamandrivorans) in the United States—Developing research, monitoring, and management strategies

    Science.gov (United States)

    Grant, Evan H. Campbell; Muths, Erin L.; Katz, Rachel A.; Canessa, Stefano; Adams, Michael J.; Ballard, Jennifer R.; Berger, Lee; Briggs, Cheryl J.; Coleman, Jeremy; Gray, Matthew J.; Harris, M. Camille; Harris, Reid N.; Hossack, Blake R.; Huyvaert, Kathryn P.; Kolby, Jonathan E.; Lips, Karen R.; Lovich, Robert E.; McCallum, Hamish I.; Mendelson, Joseph R.; Nanjappa, Priya; Olson, Deanna H.; Powers, Jenny G.; Richgels, Katherine L. D.; Russell, Robin E.; Schmidt, Benedikt R.; Spitzen-van der Sluijs, Annemarieke; Watry, Mary Kay; Woodhams, Douglas C.; White, C. LeAnn

    2016-01-20

    The recently (2013) identified pathogenic chytrid fungus, Batrachochytrium salamandrivorans (Bsal), poses a severe threat to the distribution and abundance of salamanders within the United States and Europe. Development of a response strategy for the potential, and likely, invasion of Bsal into the United States is crucial to protect global salamander biodiversity. A formal working group, led by Amphibian Research and Monitoring Initiative (ARMI) scientists from the U.S. Geological Survey (USGS) Patuxent Wildlife Research Center, Fort Collins Science Center, and Forest and Rangeland Ecosystem Science Center, was held at the USGS Powell Center for Analysis and Synthesis in Fort Collins, Colorado, United States from June 23 to June 25, 2015, to identify crucial Bsal research and monitoring needs that could inform conservation and management strategies for salamanders in the United States. Key findings of the workshop included the following: (1) the introduction of Bsal into the United States is highly probable, if not inevitable, thus requiring development of immediate short-term and long-term intervention strategies to prevent Bsal establishment and biodiversity decline; (2) management actions targeted towards pathogen containment may be ineffective in reducing the long-term spread of Bsal throughout the United States; and (3) early detection of Bsal through surveillance at key amphibian import locations, among high-risk wild populations, and through analysis of archived samples is necessary for developing management responses. Top research priorities during the preinvasion stage included the following: (1) deployment of qualified diagnostic methods for Bsal and establishment of standardized laboratory practices, (2) assessment of susceptibility for amphibian hosts (including anurans), and (3) development and evaluation of short- and long-term pathogen intervention and management strategies. Several outcomes were achieved during the workshop, including development

  12. An introduction to statistical process control in research proteomics.

    Science.gov (United States)

    Bramwell, David

    2013-12-16

    Statistical process control is a well-established and respected method which provides a general purpose, and consistent framework for monitoring and improving the quality of a process. It is routinely used in many industries where the quality of final products is critical and is often required in clinical diagnostic laboratories [1,2]. To date, the methodology has been little utilised in research proteomics. It has been shown to be capable of delivering quantitative QC procedures for qualitative clinical assays [3] making it an ideal methodology to apply to this area of biological research. To introduce statistical process control as an objective strategy for quality control and show how it could be used to benefit proteomics researchers and enhance the quality of the results they generate. We demonstrate that rules which provide basic quality control are easy to derive and implement and could have a major impact on data quality for many studies. Statistical process control is a powerful tool for investigating and improving proteomics research work-flows. The process of characterising measurement systems and defining control rules forces the exploration of key questions that can lead to significant improvements in performance. This work asserts that QC is essential to proteomics discovery experiments. Every experimenter must know the current capabilities of their measurement system and have an objective means for tracking and ensuring that performance. Proteomic analysis work-flows are complicated and multi-variate. QC is critical for clinical chemistry measurements and huge strides have been made in ensuring the quality and validity of results in clinical biochemistry labs. This work introduces some of these QC concepts and works to bridge their use from single analyte QC to applications in multi-analyte systems. This article is part of a Special Issue entitled: Standardization and Quality Control in Proteomics. Copyright © 2013 The Author. Published by Elsevier

  13. Review of the research proposal for the steam generator retired from Kori unit 1

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Joung Soo; Han, Joung Ho; Kim, Hong Pyo; Lim, Yun Soo; Lee, Deok Hyun; Hwang, Seong Sik; Hur, Do Haeng [Korea Atomic Energy Research Institute, Taejeon (Korea)

    2002-03-01

    The tubes of the steam generator retired form Kori unit 1 have many different kinds of failures, such as denting pitting, wastage, ODSCC, PWSCC.Korea Electric Power Research Institute (KEPRI) submitted a research proposal for the steam generator to the Korea Institute S and T Evaluation and Planning (KSITEP). The KISTEP requested Korea Atomic Energy Research Institute to review the proposal by organizing a committee which should be composed of the specialists of the related domestic research institutes. Opinions of the committee on the objectives, research fields, economic benefit and validity in the research proposal were reviewed and suggested optimal research fields to be fulfilled successfully for the retired steam generator. Also, the rolls for the participants in the research works were allocated, which is critical in order to do the project effectively. 6 figs., 5 tabs. (Author)

  14. Research of Snow-Melt Process on a Heated Platform

    Directory of Open Access Journals (Sweden)

    Vasilyev Gregory P.

    2016-01-01

    Full Text Available The article has shown the results of experimental researches of the snow-melt on a heated platform-near building heat-pump snow-melt platform. The near-building (yard heat pump platforms for snow melt with the area up to 10-15 m2 are a basis of the new ideology of organization of the street cleaning of Moscow from snow in the winter period which supposes the creation in the megalopolis of the «distributed snow-melt system» (DSMS using non-traditional energy sources. The results of natural experimental researches are presented for the estimation of efficiency of application in the climatic conditions of Moscow of heat pumps in the snow-melt systems. The researches were conducted on a model sample of the near-building heat-pump platform which uses the low-potential thermal energy of atmospheric air. The conducted researches have confirmed experimentally in the natural conditions the possibility and efficiency of using of atmospheric air as a source of low-potential thermal energy for evaporation of the snow-melt heat pump systems in the climatic conditions of Moscow. The results of laboratory researches of snow-melt process on a heated horizontal platform are presented. The researches have revealed a considerable dependence of efficiency of the snow-melt process on its piling mode (form-building and the organization of the process of its piling mode (form-building and the organization of the process of its (snow mass heat exchange with the surface of the heated platform. In the process of researches the effect of formation of an «ice dome» under the melting snow mass called by the fact that in case of the thickness of snow loaded on the platform more than 10 cm the water formed from the melting snow while the contact with the heating surface don’t spread on it, but soaks into the snow, wets it due to capillary effect and freezes. The formation of «ice dome» leads to a sharp increase of snow-melt period and decreases the operating

  15. EPRI/Alberta Research Council Clean Soil Process

    International Nuclear Information System (INIS)

    Spear, C.E.

    1992-12-01

    The EPRI/Alberta Research Council Clean Soil Process can remove hydrocarbon contamination from waste material from manufactured gas plants. The process uses coal as an absorbent to remove hydrocarbons. For petroleum contaminated soils, the process can bring residual concentration of petroleum below 0.1 percent and polycyclic aromatic hydrocarbon (PAH) concentration to 1--5 ppM. For coal tar contaminated soils, the process can reduce tar concentrations to about 0.05-0.5 percent and the PAH concentration to about 10--60 ppM. Additional post-treatment may be required for some precleaned soils. The process yields by-product agglomerates suitable for combustion in industrial boilers. Light hydrocarbons such as benzene are vaporized from the soil, condensed and collected in the Process and disposed of off-site. The Clean Soil Process has been tested at pilot-plant scale. A conceptual design for a 200-tons-per-day plant yielded a capital cost estimated at $3.1 million with a per-ton operating cost of $40

  16. Practical process research and development a guide for organic chemists

    CERN Document Server

    Anderson, Neal G

    2014-01-01

    Designed to provide a comprehensive, step-by-step approach to organic process research and development in the pharmaceutical, fine chemical, and agricultural chemical industries, this book describes the steps taken, following synthesis and evaluation, to bring key compounds to market in a cost-effective manner. It describes hands-on, step-by-step, approaches to solving process development problems, including route, reagent, and solvent selection; optimising catalytic reactions; chiral syntheses; and ""green chemistry."" Second Edition highlights:  Reflects the current thinking in chemical p

  17. Online persuasion process: a critical literature review of prior research

    OpenAIRE

    Poorrezaei, M

    2013-01-01

    In this paper, some of the limitations of prior research in terms of online persuasion process are\\ud highlighted. To do this, two main approaches which have been considered to study online persuasion\\ud process in context of social media are identified. Then, this study discusses the limitations and gaps\\ud of each approach. This paper is a part of author’s PhD dissertation which is being conducted to\\ud examine how different online behaviours are persuaded in online brand communities. The r...

  18. The NIHR Public Health Research Programme: responding to local authority research needs in the United Kingdom.

    Science.gov (United States)

    Dorling, Hannah; Cook, Andrew; Ollerhead, Liz; Westmore, Matt

    2015-12-11

    The remit of the National Institute for Health Research Public Health Research (PHR) Programme is to evaluate public health interventions, providing new knowledge on the benefits, costs, acceptability and wider impacts of interventions, set outside of the National Health Service, intended to improve the health of the public and reduce inequalities. This paper illustrates how the PHR Programme is providing new knowledge for public health decision makers, based on the nine key areas for local authority public health action, described by the King's Fund. Many funded PHR projects are evaluating interventions, applied in a range of settings, across the identified key areas for local authority influence. For example, research has been funded on children and young people, and for some of the wider determinants of health, such as housing and travel. Other factors, such as spatial planning, or open and green spaces and leisure, are less represented in the PHR Programme. Further opportunities in research include interventions to improve the health of adolescents, adults in workplaces, and communities. Building evidence for public health interventions at local authority level is important to prioritise and implement effective changes to improve population health.

  19. Evaluation of PHI Hunter in Natural Language Processing Research.

    Science.gov (United States)

    Redd, Andrew; Pickard, Steve; Meystre, Stephane; Scehnet, Jeffrey; Bolton, Dan; Heavirland, Julia; Weaver, Allison Lynn; Hope, Carol; Garvin, Jennifer Hornung

    2015-01-01

    We introduce and evaluate a new, easily accessible tool using a common statistical analysis and business analytics software suite, SAS, which can be programmed to remove specific protected health information (PHI) from a text document. Removal of PHI is important because the quantity of text documents used for research with natural language processing (NLP) is increasing. When using existing data for research, an investigator must remove all PHI not needed for the research to comply with human subjects' right to privacy. This process is similar, but not identical, to de-identification of a given set of documents. PHI Hunter removes PHI from free-form text. It is a set of rules to identify and remove patterns in text. PHI Hunter was applied to 473 Department of Veterans Affairs (VA) text documents randomly drawn from a research corpus stored as unstructured text in VA files. PHI Hunter performed well with PHI in the form of identification numbers such as Social Security numbers, phone numbers, and medical record numbers. The most commonly missed PHI items were names and locations. Incorrect removal of information occurred with text that looked like identification numbers. PHI Hunter fills a niche role that is related to but not equal to the role of de-identification tools. It gives research staff a tool to reasonably increase patient privacy. It performs well for highly sensitive PHI categories that are rarely used in research, but still shows possible areas for improvement. More development for patterns of text and linked demographic tables from electronic health records (EHRs) would improve the program so that more precise identifiable information can be removed. PHI Hunter is an accessible tool that can flexibly remove PHI not needed for research. If it can be tailored to the specific data set via linked demographic tables, its performance will improve in each new document set.

  20. Surgery and Research: A Practical Approach to Managing the Research Process

    Science.gov (United States)

    Swiatek, Peter R.; Chung, Kevin C.; Mahmoudi, Elham

    2016-01-01

    Following a practical project management method is essential in completing a research project on time and within budget. Although this concept is well developed in the business world, it has yet to be explored in academic surgical research. Defining and adhering to a suitable workflow would increase portability, reusability, and therefore, efficiency of the research process. In this article, we briefly review project management techniques. We specifically underline four main steps of project management: (1) definition and organization, (2) planning, (3) execution, and (4) evaluation, using practical examples from our own multidisciplinary plastic surgery research team. PMID:26710037

  1. Solid Waste Processing. A State-of-the-Art Report on Unit Operations and Processes.

    Science.gov (United States)

    Engdahl, Richard B.

    The importance and intricacy of the solid wastes disposal problem and the need to deal with it effectively and economically led to the state-of-the-art survey covered by this report. The material presented here was compiled to be used by those in government and private industry who must make or implement decisions concerning the processing of…

  2. The Cerebral Palsy Research Registry: Development and Progress Toward National Collaboration in the United States

    Science.gov (United States)

    Hurley, Donna S.; Sukal-Moulton, Theresa; Msall, Michael E.; Gaebler-Spira, Deborah; Krosschell, Kristin J.; Dewald, Julius P.

    2011-01-01

    Cerebral palsy is the most common neurodevelopmental motor disability in children. The condition requires medical, educational, social, and rehabilitative resources throughout the life span. Several countries have developed population-based registries that serve the purpose of prospective longitudinal collection of etiologic, demographic, and functional severity. The United States has not created a comprehensive program to develop such a registry. Barriers have been large population size, poor interinstitution collaboration, and decentralized medical and social systems. The Cerebral Palsy Research Registry was created to fill the gap between population and clinical-based cerebral palsy registries and promote research in the field. This is accomplished by connecting persons with cerebral palsy, as well as their families, to a network of regional researchers. This article describes the development of an expandable cerebral palsy research registry, its current status, and the potential it has to affect families and persons with cerebral palsy in the United States and abroad. PMID:21677201

  3. Cooperative Fish and Wildlife Research Units Program—2017 year in review postcard

    Science.gov (United States)

    Organ, John F.; Thompson, John D.; Dennerline, Donald E.; Childs, Dawn E.

    2018-02-08

    This postcard provides details about the Cooperative Fish and Wildlife Research Units Program—2017 Year in Review, U.S. Geological Survey Circular 1438, now available at https://doi.org/10.3133/cir1438. In this report, you will find details about the Cooperative Fish and Wildlife Research Units (CRU) Program relating to its background, fish and wildlife science, students, staffing, vacancies, research funding, outreach and training, science themes, accolades, and professional services. You will see snapshots of CRU projects with information on how results have been or are being applied by cooperators. This is the essence of what we do: science that matters.Throughout the year, keep up with CRU research projects at http://www.coopunits.org.

  4. Decision-making process to shut down, refurbish/modify, or decommission research reactors

    International Nuclear Information System (INIS)

    Stover, R.L.; Murphie, W.E.

    1992-01-01

    Most US research reactors were built more than 20 years ago and some more than 40 years ago. Many have undergone refurbishments and modifications to update their safety systems and experimental capabilities. But changing safety bases, social concerns, and budget constraints have required research reactor operators to continually make decisions to shut down or refurbish/modify their facilities. These decisions involve potential replacement of reactor equipment that has reached its lifetime limits. Changes in philosophy and operation of the reactors are also factors to be considered. In this paper, each of the four factors involved in the decision-making process are discussed in detail. Then, several examples from DOE research reactors in the United States are discussed. Finally, some general conclusions are given to aid in the decision-making process

  5. Religiosity and parenting: recent directions in process-oriented research.

    Science.gov (United States)

    Goeke-Morey, Marcie C; Cummings, E Mark

    2017-06-01

    Most faith traditions, in principle, promote family life and positive parent-child relationships. In recent years, research has moved beyond questions of whether religion supports positive parenting towards addressing more nuanced process-oriented questions, including how, why, and when religion is linked with adaptive or maladaptive parenting. Relations between religion and multiple specific parenting behaviors (e.g., involvement, warmth, authoritative parenting, communication) are identified, including contexts for when and why relations between religion and parenting are adaptive or maladaptive. A next step for research is the development and testing of theoretical models to more comprehensively account for process relations between religion and parenting. Copyright © 2017 Elsevier Ltd. All rights reserved.

  6. GPUmotif: an ultra-fast and energy-efficient motif analysis program using graphics processing units.

    Science.gov (United States)

    Zandevakili, Pooya; Hu, Ming; Qin, Zhaohui

    2012-01-01

    Computational detection of TF binding patterns has become an indispensable tool in functional genomics research. With the rapid advance of new sequencing technologies, large amounts of protein-DNA interaction data have been produced. Analyzing this data can provide substantial insight into the mechanisms of transcriptional regulation. However, the massive amount of sequence data presents daunting challenges. In our previous work, we have developed a novel algorithm called Hybrid Motif Sampler (HMS) that enables more scalable and accurate motif analysis. Despite much improvement, HMS is still time-consuming due to the requirement to calculate matching probabilities position-by-position. Using the NVIDIA CUDA toolkit, we developed a graphics processing unit (GPU)-accelerated motif analysis program named GPUmotif. We proposed a "fragmentation" technique to hide data transfer time between memories. Performance comparison studies showed that commonly-used model-based motif scan and de novo motif finding procedures such as HMS can be dramatically accelerated when running GPUmotif on NVIDIA graphics cards. As a result, energy consumption can also be greatly reduced when running motif analysis using GPUmotif. The GPUmotif program is freely available at http://sourceforge.net/projects/gpumotif/

  7. GPUmotif: an ultra-fast and energy-efficient motif analysis program using graphics processing units.

    Directory of Open Access Journals (Sweden)

    Pooya Zandevakili

    Full Text Available Computational detection of TF binding patterns has become an indispensable tool in functional genomics research. With the rapid advance of new sequencing technologies, large amounts of protein-DNA interaction data have been produced. Analyzing this data can provide substantial insight into the mechanisms of transcriptional regulation. However, the massive amount of sequence data presents daunting challenges. In our previous work, we have developed a novel algorithm called Hybrid Motif Sampler (HMS that enables more scalable and accurate motif analysis. Despite much improvement, HMS is still time-consuming due to the requirement to calculate matching probabilities position-by-position. Using the NVIDIA CUDA toolkit, we developed a graphics processing unit (GPU-accelerated motif analysis program named GPUmotif. We proposed a "fragmentation" technique to hide data transfer time between memories. Performance comparison studies showed that commonly-used model-based motif scan and de novo motif finding procedures such as HMS can be dramatically accelerated when running GPUmotif on NVIDIA graphics cards. As a result, energy consumption can also be greatly reduced when running motif analysis using GPUmotif. The GPUmotif program is freely available at http://sourceforge.net/projects/gpumotif/

  8. Psychiatry training in the United Kingdom--part 2: the training process.

    Science.gov (United States)

    Christodoulou, N; Kasiakogia, K

    2015-01-01

    In the second part of this diptych, we shall deal with psychiatric training in the United Kingdom in detail, and we will compare it--wherever this is meaningful--with the equivalent system in Greece. As explained in the first part of the paper, due to the recently increased emigration of Greek psychiatrists and psychiatric trainees, and the fact that the United Kingdom is a popular destination, it has become necessary to inform those aspiring to train in the United Kingdom of the system and the circumstances they should expect to encounter. This paper principally describes the structure of the United Kingdom's psychiatric training system, including the different stages trainees progress through and their respective requirements and processes. Specifically, specialty and subspecialty options are described and explained, special paths in training are analysed, and the notions of "special interest day" and the optional "Out of programme experience" schemes are explained. Furthermore, detailed information is offered on the pivotal points of each of the stages of the training process, with special care to explain the important differences and similarities between the systems in Greece and the United Kingdom. Special attention is given to The Royal College of Psychiatrists' Membership Exams (MRCPsych) because they are the only exams towards completing specialisation in Psychiatry in the United Kingdom. Also, the educational culture of progressing according to a set curriculum, of utilising diverse means of professional development, of empowering the trainees' autonomy by allowing initiative-based development and of applying peer supervision as a tool for professional development is stressed. We conclude that psychiatric training in the United Kingdom differs substantially to that of Greece in both structure and process. Τhere are various differences such as pure psychiatric training in the United Kingdom versus neurological and medical modules in Greece, in

  9. Process Control System of a 500-MW Unit of the Reftinskaya Local Hydroelectric Power Plant

    International Nuclear Information System (INIS)

    Grekhov, L. L.; Bilenko, V. A.; Derkach, N. N.; Galperina, A. I.; Strukov, A. P.

    2002-01-01

    The results of the installation of a process control system developed by the Interavtomatika Company (Moscow) for controlling a 500-MW pulverized coal power unit with the use of the Teleperm ME and OM650 equipment of the Siemens Company are described. The system provides a principally new level of automation and process control through monitors comparable with the operation of foreign counterparts with complete preservation of the domestic peripheral equipment. During the 4.5 years of operation of the process control system the intricate algorithms for control and data processing have proved their operational integrity

  10. The Need for Comparative Education Research to Concentrate on the Cultural Revolution within the United States.

    Science.gov (United States)

    Petit, M. Loretta

    Comparative education research and courses are needed to identify real revolutionary movements in the current cultural revolution in the United States. The presence of cultural revolution is indicated by, among other things, the development of microcultures. Intranational instead of cross-national studies are of importance in the next few years to…

  11. Research Directions: Multimodal Books in Science-Literacy Units: Language and Visual Images for Meaning Making

    Science.gov (United States)

    Pappas, Christine C.; Varelas, Maria

    2009-01-01

    This article presents a review of the author's long-term research in urban classrooms. The authors explore six illustrated information books created by children as culminating activities of integrated science-literacy units, Forest and Matter, that they developed, implemented, and studied in several 1st-3rd grade classrooms in Chicago Public…

  12. Analysis of the overall energy intensity of alumina refinery process using unit process energy intensity and product ratio method

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Liru; Aye, Lu [International Technologies Center (IDTC), Department of Civil and Environmental Engineering,The University of Melbourne, Vic. 3010 (Australia); Lu, Zhongwu [Institute of Materials and Metallurgy, Northeastern University, Shenyang 110004 (China); Zhang, Peihong [Department of Municipal and Environmental Engineering, Shenyang Architecture University, Shenyang 110168 (China)

    2006-07-15

    Alumina refinery is an energy intensive industry. Traditional energy saving methods employed have been single-equipment-orientated. Based on two concepts of 'energy carrier' and 'system', this paper presents a method that analyzes the effects of unit process energy intensity (e) and product ratio (p) on overall energy intensity of alumina. The important conclusion drawn from this method is that it is necessary to decrease both the unit process energy intensity and the product ratios in order to decrease the overall energy intensity of alumina, which may be taken as a future policy for energy saving. As a case study, the overall energy intensity of the Chinese Zhenzhou alumina refinery plant with Bayer-sinter combined method between 1995 and 2000 was analyzed. The result shows that the overall energy intensity of alumina in this plant decreased by 7.36 GJ/t-Al{sub 2}O{sub 3} over this period, 49% of total energy saving is due to direct energy saving, and 51% is due to indirect energy saving. The emphasis in this paper is on decreasing product ratios of high-energy consumption unit processes, such as evaporation, slurry sintering, aluminium trihydrate calcining and desilication. Energy savings can be made (1) by increasing the proportion of Bayer and indirect digestion, (2) by increasing the grade of ore by ore dressing or importing some rich gibbsite and (3) by promoting the advancement in technology. (author)

  13. The process research of drying UF4 by microwave

    International Nuclear Information System (INIS)

    Wen Guo; Wang Yunbo; Liu Long

    2010-01-01

    This paper make use of microwave to dry UF 4 filter cake, the aim is desorbed adsorption water. The research focus on such process conditions, boat material, thickness of filter cake, drying time, setting temperature, heating power and so on. the research of desorption crystal water of UF 4 that dried by microwave in fixed bed .When UF 4 drying by microwave and claiming by fixed bed, the qualified UF 4 powder is prepared. The research is shown that microwave can desorbs adsorption water which contain in UF 4 filter cake. There is a stable water contents in UF 4 after drying, and the sum of two members is less. After drying by microwave and claiming by fixed bed, the contents of water, UO 2 and UO 2 F 2 are all according to the quality standard. (authors)

  14. Efficient particle-in-cell simulation of auroral plasma phenomena using a CUDA enabled graphics processing unit

    Science.gov (United States)

    Sewell, Stephen

    This thesis introduces a software framework that effectively utilizes low-cost commercially available Graphic Processing Units (GPUs) to simulate complex scientific plasma phenomena that are modeled using the Particle-In-Cell (PIC) paradigm. The software framework that was developed conforms to the Compute Unified Device Architecture (CUDA), a standard for general purpose graphic processing that was introduced by NVIDIA Corporation. This framework has been verified for correctness and applied to advance the state of understanding of the electromagnetic aspects of the development of the Aurora Borealis and Aurora Australis. For each phase of the PIC methodology, this research has identified one or more methods to exploit the problem's natural parallelism and effectively map it for execution on the graphic processing unit and its host processor. The sources of overhead that can reduce the effectiveness of parallelization for each of these methods have also been identified. One of the novel aspects of this research was the utilization of particle sorting during the grid interpolation phase. The final representation resulted in simulations that executed about 38 times faster than simulations that were run on a single-core general-purpose processing system. The scalability of this framework to larger problem sizes and future generation systems has also been investigated.

  15. Perspectives on sensory processing disorder: a call for translational research

    Directory of Open Access Journals (Sweden)

    Lucy J Miller

    2009-09-01

    Full Text Available This article explores the convergence of two fields, which have similar theoretical origins: a clinical field originally known as sensory integration and a branch of neuroscience that conducts research in an area also called sensory integration. Clinically, the term was used to identify a pattern of dysfunction in children and adults, as well as a related theory, assessment, and treatment method for children who have atypical responses to ordinary sensory stimulation. Currently the term for the disorder is Sensory Processing Disorder (SPD. In neuroscience, the term sensory integration refers to converging information in the brain from one or more sensory domains. A recent subspecialty in neuroscience labeled multisensory integration (MSI refers to the neural process that occurs when sensory input from two or more different sensory modalities converge. Understanding the specific meanings of the term sensory integration intended by the clinical and neuroscience fields and the term multisensory integration in neuroscience is critical. A translational research approach would improve exploration of crucial research questions in both the basic science and clinical science. Refinement of the conceptual model of the disorder and the related treatment approach would help prioritize which specific hypotheses should be studied in both the clinical and neuroscience fields. The issue is how we can facilitate a translational approach between researchers in the two fields. Multidisciplinary, collaborative studies would increase knowledge of brain function and could make a significant contribution to alleviating the impairments of individuals with SPD and their families.

  16. Cognitive processes, models and metaphors in decision research

    Directory of Open Access Journals (Sweden)

    Ben Newell

    2008-03-01

    Full Text Available Decision research in psychology has traditionally been influenced by the extit{homo oeconomicus} metaphor with its emphasis on normative models and deviations from the predictions of those models. In contrast, the principal metaphor of cognitive psychology conceptualizes humans as `information processors', employing processes of perception, memory, categorization, problem solving and so on. Many of the processes described in cognitive theories are similar to those involved in decision making, and thus increasing cross-fertilization between the two areas is an important endeavour. A wide range of models and metaphors has been proposed to explain and describe `information processing' and many models have been applied to decision making in ingenious ways. This special issue encourages cross-fertilization between cognitive psychology and decision research by providing an overview of current perspectives in one area that continues to highlight the benefits of the synergistic approach: cognitive modeling of multi-attribute decision making. In this introduction we discuss aspects of the cognitive system that need to be considered when modeling multi-attribute decision making (e.g., automatic versus controlled processing, learning and memory constraints, metacognition and illustrate how such aspects are incorporated into the approaches proposed by contributors to the special issue. We end by discussing the challenges posed by the contrasting and sometimes incompatible assumptions of the models and metaphors.

  17. Research and development on radiation processing in Sri Lanka

    International Nuclear Information System (INIS)

    Kulatunge, S.S.; Motha, L.; Sultanbawa, Y.; Malavipathirana, S.; Silva, A de; Nanayakkara, S.; Hewajulige, I.G.N.; Silva, K.R.C de

    2008-01-01

    Research on radiation processing of natural polymer such as polysaccharides of chitosan, cellulose, carrageenan has been carried out in Sri Lanka since the year 2004. The research group have been involving in development activities on application of chitin and chitosan for wound dressing, irradiated chitosan on shelf life extension of fruits such as papaya, banana, mangoes, radiation crosslinked super-absorbent hydrogel from sodium carboxymethyl cellulose by radiation processing. Hydrogels prepared with PVA/Carrageenan/Agar has been studied on guinea pigs to determine the wound healing effect. Irradiated chitosan powder and chitosan solution was studied in vitro and found chitosan solution (1%) directly subjected to irradiation dosages even at 5 kGy was highly effective in control of anthracnose causing organism of papaya. In vivo studies with irradiated 1% chitosan solution on Rathana and red lady variety of papaya shows better control of spoilage of papaya to a considerable extent. The government of Sri Lanka (Ministry of Science and Technology and Atomic Energy Authority) is in the process of establishing the first government owned Multipurpose Gamma Irradiation Facility and it will be helpful to transfer the output of R and D in radiation processing. (author)

  18. Research on pre-processing of QR Code

    Science.gov (United States)

    Sun, Haixing; Xia, Haojie; Dong, Ning

    2013-10-01

    QR code encodes many kinds of information because of its advantages: large storage capacity, high reliability, full arrange of utter-high-speed reading, small printing size and high-efficient representation of Chinese characters, etc. In order to obtain the clearer binarization image from complex background, and improve the recognition rate of QR code, this paper researches on pre-processing methods of QR code (Quick Response Code), and shows algorithms and results of image pre-processing for QR code recognition. Improve the conventional method by changing the Souvola's adaptive text recognition method. Additionally, introduce the QR code Extraction which adapts to different image size, flexible image correction approach, and improve the efficiency and accuracy of QR code image processing.

  19. Fast, multi-channel real-time processing of signals with microsecond latency using graphics processing units

    Energy Technology Data Exchange (ETDEWEB)

    Rath, N., E-mail: Nikolaus@rath.org; Levesque, J. P.; Mauel, M. E.; Navratil, G. A.; Peng, Q. [Department of Applied Physics and Applied Mathematics, Columbia University, 500 W 120th St, New York, New York 10027 (United States); Kato, S. [Department of Information Engineering, Nagoya University, Nagoya (Japan)

    2014-04-15

    Fast, digital signal processing (DSP) has many applications. Typical hardware options for performing DSP are field-programmable gate arrays (FPGAs), application-specific integrated DSP chips, or general purpose personal computer systems. This paper presents a novel DSP platform that has been developed for feedback control on the HBT-EP tokamak device. The system runs all signal processing exclusively on a Graphics Processing Unit (GPU) to achieve real-time performance with latencies below 8 μs. Signals are transferred into and out of the GPU using PCI Express peer-to-peer direct-memory-access transfers without involvement of the central processing unit or host memory. Tests were performed on the feedback control system of the HBT-EP tokamak using forty 16-bit floating point inputs and outputs each and a sampling rate of up to 250 kHz. Signals were digitized by a D-TACQ ACQ196 module, processing done on an NVIDIA GTX 580 GPU programmed in CUDA, and analog output was generated by D-TACQ AO32CPCI modules.

  20. Fast, multi-channel real-time processing of signals with microsecond latency using graphics processing units

    International Nuclear Information System (INIS)

    Rath, N.; Levesque, J. P.; Mauel, M. E.; Navratil, G. A.; Peng, Q.; Kato, S.

    2014-01-01

    Fast, digital signal processing (DSP) has many applications. Typical hardware options for performing DSP are field-programmable gate arrays (FPGAs), application-specific integrated DSP chips, or general purpose personal computer systems. This paper presents a novel DSP platform that has been developed for feedback control on the HBT-EP tokamak device. The system runs all signal processing exclusively on a Graphics Processing Unit (GPU) to achieve real-time performance with latencies below 8 μs. Signals are transferred into and out of the GPU using PCI Express peer-to-peer direct-memory-access transfers without involvement of the central processing unit or host memory. Tests were performed on the feedback control system of the HBT-EP tokamak using forty 16-bit floating point inputs and outputs each and a sampling rate of up to 250 kHz. Signals were digitized by a D-TACQ ACQ196 module, processing done on an NVIDIA GTX 580 GPU programmed in CUDA, and analog output was generated by D-TACQ AO32CPCI modules

  1. Bridging the clinician/researcher gap with systemic research: the case for process research, dyadic, and sequential analysis.

    Science.gov (United States)

    Oka, Megan; Whiting, Jason

    2013-01-01

    In Marriage and Family Therapy (MFT), as in many clinical disciplines, concern surfaces about the clinician/researcher gap. This gap includes a lack of accessible, practical research for clinicians. MFT clinical research often borrows from the medical tradition of randomized control trials, which typically use linear methods, or follow procedures distanced from "real-world" therapy. We review traditional research methods and their use in MFT and propose increased use of methods that are more systemic in nature and more applicable to MFTs: process research, dyadic data analysis, and sequential analysis. We will review current research employing these methods, as well as suggestions and directions for further research. © 2013 American Association for Marriage and Family Therapy.

  2. United States Air Force Research Initiation Program. 1984 Research Reports. Volume 3.

    Science.gov (United States)

    1986-05-01

    right terminal of lamp 13. Position the second switch below switch A such that the handle may be pulled toward you or pushed away from you. The second...position. 42. Pull the handle of s.itch B toward you to light lamp B. 47. Fush.the handle of switch B all the way forward to light both lamps A and B... goalI was to obtain information that could lead to the stabilization of a . Nd:YAG laser. III. APPROACH At the beginning of this research, some of the

  3. Sodium content of popular commercially processed and restaurant foods in the United States

    Science.gov (United States)

    Nutrient Data Laboratory (NDL) of the U.S. Department of Agriculture (USDA) in close collaboration with U.S. Center for Disease Control and Prevention is monitoring the sodium content of commercially processed and restaurant foods in the United States. The main purpose of this manuscript is to prov...

  4. 78 FR 18234 - Service of Process on Manufacturers; Manufacturers Importing Electronic Products Into the United...

    Science.gov (United States)

    2013-03-26

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration 21 CFR Part 1005 [Docket No. FDA-2007-N-0091; (formerly 2007N-0104)] Service of Process on Manufacturers; Manufacturers Importing Electronic Products Into the United States; Agent Designation; Change of Address AGENCY: Food and Drug...

  5. ECO LOGIC INTERNATIONAL GAS-PHASE CHEMICAL REDUCTION PROCESS - THE THERMAL DESORPTION UNIT - APPLICATIONS ANALYSIS REPORT

    Science.gov (United States)

    ELI ECO Logic International, Inc.'s Thermal Desorption Unit (TDU) is specifically designed for use with Eco Logic's Gas Phase Chemical Reduction Process. The technology uses an externally heated bath of molten tin in a hydrogen atmosphere to desorb hazardous organic compounds fro...

  6. Process methods and levels of automation of wood pallet repair in the United States

    Science.gov (United States)

    Jonghun Park; Laszlo Horvath; Robert J. Bush

    2016-01-01

    This study documented the current status of wood pallet repair in the United States by identifying the types of processing and equipment usage in repair operations from an automation prespective. The wood pallet repair firms included in the sudy received an average of approximately 1.28 million cores (i.e., used pallets) for recovery in 2012. A majority of the cores...

  7. Silicon Carbide (SiC) Power Processing Unit (PPU) for Hall Effect Thrusters, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — In this SBIR project, APEI, Inc. is proposing to develop a high efficiency, rad-hard 3.8 kW silicon carbide (SiC) power supply for the Power Processing Unit (PPU) of...

  8. Annual progress report 1993. Work in controlled thermonuclear fusion research performed in the fusion research unit under the contract of association between Euratom and Risoe National Laboratory

    International Nuclear Information System (INIS)

    1994-09-01

    The programme of the Research Unit of the Fusion Association Euratom-Risoe National Laboratory covers work in fusion plasma physics and in fusion technology. The fusion plasma physics group has activities within (a) studies of nonlinear dynamical processes in magnetized plasmas, (b) development of pellet injectors for fusion experiments, and (c) development of diagnostics for fusion plasmas. The activities in technology cover radiation damage of fusion reactor materials. A summary of the activities in 1993 is presented. (au) (4 tabs., 21 ills., 64 refs.)

  9. European research and development on HTGR process heat applications

    International Nuclear Information System (INIS)

    Verfondern, Karl; Lensa, Werner von

    2003-01-01

    The High-Temperature Gas-Cooled Reactor represents a suitable and safe concept of a future nuclear power plant with the potential to produce process heat to be utilized in many industrial processes such as reforming of natural gas, coal gasification and liquefaction, heavy oil recovery to serve for the production of the storable commodities hydrogen or energy alcohols as future transportation fuels. The paper will include a description of the broad range of applications for HTGR process heat and describe the results of the German long-term projects ''Prototype Nuclear Process Heat Reactor Project'' (PNP), in which the technical feasibility of an HTGR in combination with a chemical facility for coal gasification processes has been proven, and ''Nuclear Long-Distance Energy Transportation'' (NFE), which was the demonstration and verification of the closed-cycle, long-distance energy transmission system EVA/ADAM. Furthermore, new European research initiatives are shortly described. A particular concern is the safety of a combined nuclear/chemical facility requiring a concept against potential fire and explosion hazards. (author)

  10. Preliminary Research on Possibilities of Drilling Process Robotization

    Science.gov (United States)

    Pawel, Stefaniak; Jacek, Wodecki; Jakubiak, Janusz; Zimroz, Radoslaw

    2017-12-01

    Nowadays, drilling & blasting is crucial technique for deposit excavation using in hard rock mining. Unfortunately, such approach requires qualified staff to perform, and consequently there is a serious risk related to rock mechanics when using explosives. Negative influence of explosives usage on safety issues of underground mine is a main cause of mining demands related to elimination of people from production area. Other aspects worth taking into consideration are drilling precision according to drilling pattern, blasting effectiveness, improvement of drilling tool reliability etc. In the literature different drilling support solutions are well-known in terms of positioning support systems, anti-jamming systems or cavity detection systems. For many years, teleoperation of drilling process is also developed. Unfortunately, available technologies have so far not fully met the industries expectation in hard rock. Mine of the future is expected to incorporate robotic system instead of current approaches. In this paper we present preliminary research related to robotization of drilling process and possibilities of its application in underground mine condition. A test rig has been proposed. To simulate drilling process several key assumptions have been accepted. As a result, algorithms for automation of drilling process have been proposed and tested on the test rig. Experiences gathered so far underline that there is a need for further developing robotic system for drilling process.

  11. Challenges and strategies for quantitative and qualitative field research in the United Arab Emirates.

    Science.gov (United States)

    Aw, Tar-Ching; Zoubeidi, Taoufik; Al-Maskari, Fatma; Blair, Iain

    2011-01-01

    Clinical and public health research depends on factors including national systems, socio-cultural influences, and access to organisations and individuals. As a 'new' country, the United Arab Emirates (UAE) has yet to develop strong support for population research. However, there is interest in research. The challenges for quantitative and qualitative research include the varied composition and mobility of the UAE population, with limited health records and disease registries. Long-term follow-up of patients, and tracing foreign workers who may only be in the UAE for a few years, are two major obstacles for longitudinal studies. There can also be a reluctance shown by parts of the population to participate in studies, especially those that require responding to what is perceived as sensitive questions. Successful execution of population research in the UAE requires an understanding of socio-cultural aspects of the study population, and good communication between researchers and participants.

  12. Mapping the Asthma Care Process: Implications for Research and Practice.

    Science.gov (United States)

    Dima, Alexandra Lelia; de Bruin, Marijn; Van Ganse, Eric

    2016-01-01

    Whether people with asthma gain and maintain control over their condition depends not only on the availability of effective drugs, but also on multiple patient and health care professional (HCP) behaviors. Research in asthma rarely considers how these behaviors interact with each other and drug effectiveness to determine health outcomes, which may limit real-life applicability of findings. The objective of this study was to develop a logic process model (Asthma Care Model; ACM) that explains how patient and HCP behaviors impact on the asthma care process. Within a European research project on asthma (ASTRO-LAB), we reviewed asthma care guidelines and empirical literature, and conducted qualitative interviews with patients and HCPs. Findings were discussed with the project team and respiratory care experts and integrated in a causal model. The model outlines a causal sequence of treatment events, from diagnosis and assessment to treatment prescription, drug exposure, and health outcomes. The relationships between these components are moderated by patient behaviors (medication adherence, symptom monitoring, managing triggers, and exacerbations) and HCP behaviors (medical care and self-management support). Modifiable and nonmodifiable behavioral determinants influence the behaviors of patients and HCPs. The model is dynamic as it includes feedback loops of behavioral and clinical outcomes, which influence future patient and HCP decision making. Key evidence for each relationship is summarized to derive research priorities and clinical recommendations. The ACM model is of interest to both researchers and practitioners, and intended as a first version (ACM-v1) of a common framework for generating and translating research evidence in asthma care. Copyright © 2016 The Authors. Published by Elsevier Inc. All rights reserved.

  13. Research on unit commitment with large-scale wind power connected power system

    Science.gov (United States)

    Jiao, Ran; Zhang, Baoqun; Chi, Zhongjun; Gong, Cheng; Ma, Longfei; Yang, Bing

    2017-01-01

    Large-scale integration of wind power generators into power grid brings severe challenges to power system economic dispatch due to its stochastic volatility. Unit commitment including wind farm is analyzed from the two parts of modeling and solving methods. The structures and characteristics can be summarized after classification has been done according to different objective function and constraints. Finally, the issues to be solved and possible directions of research and development in the future are discussed, which can adapt to the requirements of the electricity market, energy-saving power generation dispatching and smart grid, even providing reference for research and practice of researchers and workers in this field.

  14. [Ethics of research in psychiatry. Comparison of France and the United States].

    Science.gov (United States)

    Lemoine, P; Pacault-Legendre, V

    1983-01-01

    This article presents a comparison of research ethics in psychopharmacology in France and the United States. The authors present some elements of definition, etymology and of history. In addition, they study how this very specific research is actually done. Many questions are discussed, including the right of the patient, and the problem of normal volunteers. Other aspects are more technical i.e. remuneration, protocol, and the product. Finally the role of the ethics committees is investigated. These committees comprise the third component of the trial that consists of the research and the subject.

  15. The Research on Modeling and Simulation of TFE Polymerization Process

    Directory of Open Access Journals (Sweden)

    Jing Gao Sun

    2014-01-01

    Full Text Available PTFE (polytetrafluoroethylene is the fluorinated straight-chain polymer, made by the polymerization of tetrafluoroethylene monomer; it is used widely because of its excellent performance and can be obtained by the polymerization of body, solutions, suspensions, and emulsions. But only the last two are the main ways. This research paper makes simulation based on Polymer Plus. It uses the emulsion polymerization method at background to carry out a semibatch reactor system. Upon the actual production conditions, simulation process under the steady state conditions is used to analyze the effects of the changes on operating conditions; the corresponding dynamic model is created to analyze the impact of the changes of conditions on the entire system. Moreover, the amount of APS which plays an important part in this reaction is discussed for getting the most suitable amount of initiator. Because of less research work on this job, it is so difficult to find the related data from the literature. Therefore, this research will have a great significance for the process of the tetrafluoroethylene emulsion polymerization in the future.

  16. A structural and thermal packaging approach for power processing units for 30-cm ion thrusters

    Science.gov (United States)

    Maloy, J. E.; Sharp, G. R.

    1975-01-01

    Solar Electric Propulsion (SEP) is currently being studied for possible use in a number of near earth and planetary missions. The thruster subsystem for these missions would consist of 30 centimeter ion thrusters with Power Processor Units (PPU) clustered in assemblies of from two to ten units. A preliminary design study of the electronic packaging of the PPU has been completed at Lewis Research Center of NASA. This study evaluates designs meeting the competing requirements of low system weight and overall mission flexibility. These requirements are evaluated regarding structural and thermal design, electrical efficiency, and integration of the electrical circuits into a functional PPU layout.

  17. Understanding the Development of Minimum Unit Pricing of Alcohol in Scotland: A Qualitative Study of the Policy Process

    Science.gov (United States)

    Katikireddi, Srinivasa Vittal; Hilton, Shona; Bonell, Chris; Bond, Lyndal

    2014-01-01

    Background Minimum unit pricing of alcohol is a novel public health policy with the potential to improve population health and reduce health inequalities. Theories of the policy process may help to understand the development of policy innovation and in turn identify lessons for future public health research and practice. This study aims to explain minimum unit pricing’s development by taking a ‘multiple-lenses’ approach to understanding the policy process. In particular, we apply three perspectives of the policy process (Kingdon’s multiple streams, Punctuated-Equilibrium Theory, Multi-Level Governance) to understand how and why minimum unit pricing has developed in Scotland and describe implications for efforts to develop evidence-informed policymaking. Methods Semi-structured interviews were conducted with policy actors (politicians, civil servants, academics, advocates, industry representatives) involved in the development of MUP (n = 36). Interviewees were asked about the policy process and the role of evidence in policy development. Data from two other sources (a review of policy documents and an analysis of evidence submission documents to the Scottish Parliament) were used for triangulation. Findings The three perspectives provide complementary understandings of the policy process. Evidence has played an important role in presenting the policy issue of alcohol as a problem requiring action. Scotland-specific data and a change in the policy ‘image’ to a population-based problem contributed to making alcohol-related harms a priority for action. The limited powers of Scottish Government help explain the type of price intervention pursued while distinct aspects of the Scottish political climate favoured the pursuit of price-based interventions. Conclusions Evidence has played a crucial but complex role in the development of an innovative policy. Utilising different political science theories helps explain different aspects of the policy process

  18. Understanding the development of minimum unit pricing of alcohol in Scotland: a qualitative study of the policy process.

    Science.gov (United States)

    Katikireddi, Srinivasa Vittal; Hilton, Shona; Bonell, Chris; Bond, Lyndal

    2014-01-01

    Minimum unit pricing of alcohol is a novel public health policy with the potential to improve population health and reduce health inequalities. Theories of the policy process may help to understand the development of policy innovation and in turn identify lessons for future public health research and practice. This study aims to explain minimum unit pricing's development by taking a 'multiple-lenses' approach to understanding the policy process. In particular, we apply three perspectives of the policy process (Kingdon's multiple streams, Punctuated-Equilibrium Theory, Multi-Level Governance) to understand how and why minimum unit pricing has developed in Scotland and describe implications for efforts to develop evidence-informed policymaking. Semi-structured interviews were conducted with policy actors (politicians, civil servants, academics, advocates, industry representatives) involved in the development of MUP (n = 36). Interviewees were asked about the policy process and the role of evidence in policy development. Data from two other sources (a review of policy documents and an analysis of evidence submission documents to the Scottish Parliament) were used for triangulation. The three perspectives provide complementary understandings of the policy process. Evidence has played an important role in presenting the policy issue of alcohol as a problem requiring action. Scotland-specific data and a change in the policy 'image' to a population-based problem contributed to making alcohol-related harms a priority for action. The limited powers of Scottish Government help explain the type of price intervention pursued while distinct aspects of the Scottish political climate favoured the pursuit of price-based interventions. Evidence has played a crucial but complex role in the development of an innovative policy. Utilising different political science theories helps explain different aspects of the policy process, with Multi-Level Governance particularly useful for

  19. The millstone industry a summary of research on quarries and producers in the United States, Europe and elsewhere

    CERN Document Server

    Hockensmith, Charles D

    2009-01-01

    Since prehistoric times, the process of cutting rock to make millstones has been one of the most important industries in the world. The first part of this book compiles information on the millstone industry in the United States, which dates between the mid-1600s and the mid-1900s. Primarily based on archival research and brief accounts published in geological and historical volumes, it focuses on conglomerate, granite, flint, quartzite, gneiss, and sandstone quarries in different regions and states. The second part focuses on the millstone quarrying industry in Europe and other areas.

  20. Methodological approach in determination of small spatial units in a highly complex terrain in atmospheric pollution research: the case of Zasavje region in Slovenia.

    Science.gov (United States)

    Kukec, Andreja; Boznar, Marija Z; Mlakar, Primoz; Grasic, Bostjan; Herakovic, Andrej; Zadnik, Vesna; Zaletel-Kragelj, Lijana; Farkas, Jerneja; Erzen, Ivan

    2014-05-01

    The study of atmospheric air pollution research in complex terrains is challenged by the lack of appropriate methodology supporting the analysis of the spatial relationship between phenomena affected by a multitude of factors. The key is optimal design of a meaningful approach based on small spatial units of observation. The Zasavje region, Slovenia, was chosen as study area with the main objective to investigate in practice the role of such units in a test environment. The process consisted of three steps: modelling of pollution in the atmosphere with dispersion models, transfer of the results to geographical information system software, and then moving on to final determination of the function of small spatial units. A methodology capable of designing useful units for atmospheric air pollution research in highly complex terrains was created, and the results were deemed useful in offering starting points for further research in the field of geospatial health.

  1. Software Graphics Processing Unit (sGPU) for Deep Space Applications

    Science.gov (United States)

    McCabe, Mary; Salazar, George; Steele, Glen

    2015-01-01

    A graphics processing capability will be required for deep space missions and must include a range of applications, from safety-critical vehicle health status to telemedicine for crew health. However, preliminary radiation testing of commercial graphics processing cards suggest they cannot operate in the deep space radiation environment. Investigation into an Software Graphics Processing Unit (sGPU)comprised of commercial-equivalent radiation hardened/tolerant single board computers, field programmable gate arrays, and safety-critical display software shows promising results. Preliminary performance of approximately 30 frames per second (FPS) has been achieved. Use of multi-core processors may provide a significant increase in performance.

  2. Psychological research in the process of creating artistic works

    Directory of Open Access Journals (Sweden)

    Milićević Nebojša

    2016-01-01

    Full Text Available This text is the review of previous attempt to research creative process in art. Neumann's and Weisberg's classification has been supplemented by the original research by the author of this text. On the example of Picasso's drawing of Guernica it was fulfilled the genesis of this monumental art piece in the light of the theory of aesthetic decision making (Ognjenović, 1980, 1991 and the theory of aesthetic evolution (Martindale, 1990. Based on the evaluation of the students of psychology (N = 32 on the scales of semantic differential, the trends of aesthetic modus in various phases in creating details of the picture (bull head, female had, horse head were analyzed. On the example of bull head details the hypothesis is mainly confirmed. The dimension of harmony (H during the phase of creation shows a soft fall of this detail (F = 3,02, p < 0.05. Decorative, redundant and richness in details (R during phases rapidly grows, while in finishing line falls (F = 13,88, p < 0.01. It is the same with the dimension of distance (D that rises during the period of creation of preliminary sketch bull head (F = 6,74, p < 0.05. Trend arousal potential is beside some oscillations, according with earlier Martindale's findings, shows a slow linear rise (F = 11,12, p < 0.05. Primordial content (PS changes from faze showing alternating oscillatory movement that can be hardly described by more simple regression equation. That is the main point of Picasso's sudden transformation in style of drawing. The results confirm the theoretical hypotheses. Finally, it can be concluded that beside the complexity of creative process, contemporary psychological research explain some of the aspects of creative process.

  3. Health and medical research funding agencies' promotion of public engagement within research: a qualitative interview study exploring the United Kingdom context.

    Science.gov (United States)

    van Bekkum, Jennifer E; Fergie, Gillian M; Hilton, Shona

    2016-03-24

    Public engagement (PE) has become a common feature of many liberal governmental agendas worldwide. Since the turn of this century there has been a succession of United Kingdom policy initiatives to encourage research funding agencies, universities and researchers to reconsider how they engage with citizens and communities. Although most funding agencies now explicitly promote PE within research, little empirical work has been carried out in this area. In this study, we explored why and how health and medical research funding agencies in the United Kingdom have interpreted and implemented their role to promote PE within research. Semi-structured interviews were carried out with 30 key informants from 10 agencies that fund health or medical research. Data were also gathered from agencies' websites and documentation. The analysis was based on the constant comparative method. Across agencies, we found that PE was being interpreted and operationalised in various different ways. The terminology used within funding agencies to describe PE seems to be flexibly applied. Disciplinary differences were evident both in the terminology used to describe PE and the drivers for PE highlighted by participants - with applied health science funders more aligned with participatory models of PE. Within the grant funding process PE was rarely systematically treated as a key component of research. In particular, PE was not routinely incorporated into the planning of funding calls. PE was more likely to be considered in the application and assessment phases, where it was largely appraised as a tool for enhancing science. Concerns were expressed regarding how to monitor and evaluate PE within research. This study suggests funding agencies working within specific areas of health and medicine can promote particular definitions of PE and aligned practices which determine the boundaries in which researchers working in these areas understand and practice PE. Our study also highlights how the

  4. Research progress on trifluoromethyl-based radical reaction process

    Science.gov (United States)

    Song, Hao

    2017-12-01

    Due to the unique properties imparted by the trifluoromethyl group, such as high electron density and strong lipotropy, which effectively improve acidity, lipophilicity and metabolic stability of the molecule itself, trifluoromethyl-substituted organic compounds are becoming increasingly important as structural motifs in pharmaceuticals, agrochemicals and organic materials. In this review, we present several methods developed for the direct introduction of a trifluoromethyl group, beginning with its rich and storied history. Then the present article addresses mechanism and process in carbon-carbon bond forming reaction based on radical process which is divided into three parts according to the way of CF3 radical generation. Finally, challenges and opportunities of researches on trifluoromethylation reactions facing are prospected.

  5. Using of Natural Language Processing Techniques in Suicide Research

    Directory of Open Access Journals (Sweden)

    Azam Orooji

    2017-09-01

    Full Text Available It is estimated that each year many people, most of whom are teenagers and young adults die by suicide worldwide. Suicide receives special attention with many countries developing national strategies for prevention. Since, more medical information is available in text, Preventing the growing trend of suicide in communities requires analyzing various textual resources, such as patient records, information on the web or questionnaires. For this purpose, this study systematically reviews recent studies related to the use of natural language processing techniques in the area of people’s health who have completed suicide or are at risk. After electronically searching for the PubMed and ScienceDirect databases and studying articles by two reviewers, 21 articles matched the inclusion criteria. This study revealed that, if a suitable data set is available, natural language processing techniques are well suited for various types of suicide related research.

  6. Process research on non-CZ silicon material

    Science.gov (United States)

    1982-01-01

    High risk, high payoff research areas associated with he process for producing photovoltaic modules using non-CZ sheet material are investigated. All investigations are being performed using dendritic web silicon, but all processes are directly applicable to other ribbon forms of sheet material. The technical feasibility of forming front and back junctions in non-CZ silicon using liquid dopant techniques was determined. Numerous commercially available liquid phosphorus and boron dopant solutions are investigated. Temperature-time profiles to achieve N(+) and P(+) sheet resistivities of 60 + or - 10 and 40 + or - s10 ohms per square centimeter respectively are established. A study of the optimal method of liquid dopant application is performed. The technical feasibility of forming a liquid applied diffusion mask to replace the more costly chemical vapor deposited SiO2 diffusion mask was also determined.

  7. ANALYTIC HIERARCHY PROCESS: AN APPLICATION IN GREEN BUILDING MARKET RESEARCH

    Directory of Open Access Journals (Sweden)

    Sharmin Attaran

    2013-01-01

    Full Text Available Sustainability has become a necessity in the building industry. In recent years, as the general public is more informed and aware of sustainability related issues, they are becoming major players in the decision making process regarding their built environment. However, there are still challenges with how sustainability is communicated to occupants and owners of buildings. As the global economic crisis is continuing, the marketing of green buildings needs to be refined to communicate the lifetime benefits of sustainability. One of the ways to develop effective marketing strategies, is to understand what the occupants value the most among many aspects of green buildings thus develop focused marketing solutions. Authors present a conceptual methodology using Analytic Hierarchy Process toward identifying consumer ranking and weights of a major green building rating system’s categories. Authors use sample non-representative data to illustrate the proposed methodology, while sharing preliminary qualitative data from the research in progress.

  8. Process research of non-CZ silicon material

    Science.gov (United States)

    Campbell, R. B.

    1984-01-01

    Advanced processing techniques for non-CZ silicon sheet material that might improve the cost effectiveness of photovoltaic module production were investigated. Specifically, the simultaneous diffusion of liquid boron and liquid phosphorus organometallic precursors into n-type dendritic silicon web was examined. The simultaneous junction formation method for solar cells was compared with the sequential junction formation method. The electrical resistivity of the n-n and p-n junctions was discussed. Further research activities for this program along with a program documentation schedule are given.

  9. Magnetohydrodynamic research in fusion blanket engineering and metallurgical processing

    International Nuclear Information System (INIS)

    Tokuhiro, A.

    1991-11-01

    A review of recent research activities in liquid metal magnetohydrodynamics (LM-MHDs) is presented in this article. Two major reserach areas are discussed. The first topic involves the thermomechanical design issues in a proposed tokamak fusion reactor. The primary concerns are in the magneto-thermal-hydraulic performance of a self-cooled liquid metal blanket. The second topic involves the application of MHD in material processing in the metallurgical and semiconductor industries. The two representative applications are electromagnetic stirring (EMS) of continuously cast steel and the Czochralski (CZ) method of crystal growth in the presence of a magnetic field. (author) 24 figs., 10 tabs., 136 refs

  10. A continuing success - The United States Foreign Research Reactor Spent Nuclear Fuel Acceptance Program

    International Nuclear Information System (INIS)

    Mustin, Tracy P.; Clapper, Maureen; Reilly, Jill E.

    2000-01-01

    The United States Department of Energy, in consultation with the Department of State, adopted the Nuclear Weapons Nonproliferation Policy Concerning Foreign Research Reactor Spent Nuclear Fuel in May 1996. To date, the Foreign Research Reactor (FRR) Spent Nuclear Fuel (SNF) Acceptance Program, established under this policy, has completed 16 spent fuel shipments. 2,651 material test reactor (MTR) assemblies, one Slowpoke core containing less than 1 kilogram of U.S.-origin enriched uranium, 824 Training, Research, Isotope, General Atomic (TRIGA) rods, and 267 TRIGA pins from research reactors around the world have been shipped to the United States so far under this program. As the FRR SNF Acceptance Program progresses into the fifth year of implementation, a second U.S. cross country shipment has been completed, as well as a second overland truck shipment from Canada. Both the cross country shipment and the Canadian shipment were safely and successfully completed, increasing our knowledge and experience in these types of shipments. In addition, two other shipments were completed since last year's RERTR meeting. Other program activities since the last meeting included: taking pre-emptive steps to avoid license amendment pitfalls/showstoppers for spent fuel casks, publication of a revision to the Record of Decision allowing up to 16 casks per ocean going vessel, and the issuance of a cable to 16 of the 41 eligible countries reminding their governments and the reactor operators that the U.S.-origin uranium in their research reactors may be eligible for return to the United States under the Acceptance Program and urging them to begin discussions on shipping schedules. The FRR SNF program has also supported the Department's implementation of the competitive pricing policy for uranium and resumption of shipments of fresh uranium for fabrication into assemblies for research reactors. The United States Foreign Research Reactor Spent Nuclear Fuel Acceptance Program continues

  11. Earth Science Research in DUSEL; a Deep Underground Science and Engineering Laboratory in the United States

    Science.gov (United States)

    Fairhurst, C.; Onstott, T. C.; Tiedje, J. M.; McPherson, B.; Pfiffner, S. M.; Wang, J. S.

    2004-12-01

    A summary of efforts to create one or more Deep Underground Science and Engineering Laboratories (DUSEL) in the United States is presented. A workshop in Berkeley, August 11-14, 2004, explored the technical requirements of DUSEL for research in basic and applied geological and microbiological sciences, together with elementary particle physics and integrated education and public outreach. The workshop was organized by Bernard Sadoulet, an astrophysicist and the principal investigator (PI) of a community-wide DUSEL program evolving in coordination with the National Science Foundation. The PI team has three physicists (in nuclear science, high-energy physics, and astrophysics) and three earth scientists (in geoscience, biology and engineering). Presentations, working group reports, links to previous workshop/meeting talks, and information about DUSEL candidate sites, are presented in http://neutrino.lbl.gov/DUSELS-1. The Berkeley workshop is a continuation of decades of efforts, the most recent including the 2001 Underground Science Conference's earth science and geomicrobiology workshops, the 2002 International Workshop on Neutrino and Subterranean Science, and the 2003 EarthLab Report. This perspective (from three earth science co-PIs, the lead author of EarthLab report, the lead scientist of education/outreach, and the local earth science organizer) is to inform the community on the status of this national initiative, and to invite their active support. Having a dedicated facility with decades-long, extensive three-dimensional underground access was recognized as the most important single attribute of DUSEL. Many research initiatives were identified and more are expected as the broader community becomes aware of DUSEL. Working groups were organized to evaluate hydrology and coupled processes; geochemistry; rock mechanics/seismology; applications (e.g., homeland security, environment assessment, petroleum recovery, and carbon sequestration); geomicrobiology and

  12. Research Experiences for Undergraduates in Estuarine and Atmospheric Processes

    Science.gov (United States)

    Aller, J. Y.

    2009-12-01

    Our program in the School of Marine and Atmospheric Sciences at Stony Brook University is unique in emphasizing the interdisciplinary study of coastal ocean and atmospheric processes. We attract a large number of both male and female undergraduate applicants representing diverse ethnic groups from across the country. Many are multi-discipline majors merging geology, biology, chemistry, or physics with engineering, and/or mathematics and welcome the opportunity to combine their academic training to examine environmental problems. Our goal is a program reflective of today’s world and environmental challenges, one that provides a ‘hands-on’ research experience which illustrates the usefulness of scientific research for understanding real-world problems or phenomena, and one in which students are challenged to apply their academic backgrounds to develop intuition about natural systems and processes. Projects this past summer focused on assessing climate change and its effects on coastal environments and processes. Projects addressed the implications of a changing global climate over the next 50 years on hydrologic cycles and coastal environments like barrier islands and beaches, on seasonal weather conditions and extreme events, on aerosols and the Earth’s radiative balance, and on aquatic habitats and biota. Collaborative field and laboratory or computer-based projects involving two or three REU students, graduate students, and several mentors, enable undergraduate students appreciate the importance of teamwork in addressing specific scientific questions or gaining maximum insight into a particular phenomenon or process. We believe that our approach allows students to understand what their role will be as scientists in the next phase of our earth’s evolution.

  13. U.S. Geological Survey Cooperative Fish and Wildlife Research Units Program—2016–2017 Research Abstracts

    Science.gov (United States)

    Dennerline, Donald E.; Childs, Dawn E.

    2017-04-20

    The U.S. Geological Survey (USGS) has several strategic goals that focus its efforts on serving the American people. The USGS Ecosystems Mission Area has responsibility for the following objectives under the strategic goal of “Science to Manage and Sustain Resources for Thriving Economies and Healthy Ecosystems”:Understand, model, and predict change in natural systemsConserve and protect wildlife and fish species and their habitatsReduce or eliminate the threat of invasive species and wildlife diseaseThis report provides abstracts of the majority of ongoing research investigations of the USGS Cooperative Fish and Wildlife Research Units program and is intended to complement the 2016 Cooperative Research Units Program Year in Review Circular 1424 (https://doi.org/10.3133/cir1424). The report is organized by the following major science themes that contribute to the objectives of the USGS:Advanced TechnologiesClimate ScienceDecision ScienceEcological FlowsEcosystem ServicesEndangered Species Conservation, Recovery, and Proactive StrategiesEnergyHuman DimensionsInvasive SpeciesLandscape EcologySpecies of Greatest Conservation NeedSpecies Population, Habitat, and Harvest ManagementWildlife Health and Disease

  14. Ethnographic research into nursing in acute adult mental health units: a review.

    Science.gov (United States)

    Cleary, Michelle; Hunt, Glenn E; Horsfall, Jan; Deacon, Maureen

    2011-01-01

    Acute inpatient mental health units are busy and sometimes chaotic settings, with high bed occupancy rates. These settings include acutely unwell patients, busy staff, and a milieu characterised by unpredictable interactions and events. This paper is a report of a literature review conducted to identify, analyse, and synthesize ethnographic research in adult acute inpatient mental health units. Several electronic databases were searched using relevant keywords to identify studies published from 1990-present. Additional searches were conducted using reference lists. Ethnographic studies published in English were included if they investigated acute inpatient care in adult settings. Papers were excluded if the unit under study was not exclusively for patients in the acute phase of their mental illness, or where the original study was not fully ethnographic. Ten research studies meeting our criteria were found (21 papers). Findings were grouped into the following overarching categories: (1) Micro-skills; (2) Collectivity; (3) Pragmatism; and (4) Reframing of nursing activities. The results of this ethnographic review reveal the complexity, patient-orientation, and productivity of some nursing interventions that may not have been observed or understood without the use of this research method. Additional quality research should focus on redefining clinical priorities and philosophies to ensure everyday care is aligned constructively with the expectations of stakeholders and is consistent with policy and the realities of the organisational setting. We have more to learn from each other with regard to the effective nursing care of inpatients who are acutely disturbed.

  15. Occupational therapy practice community: process evaluation by the participants and researchers

    Directory of Open Access Journals (Sweden)

    Sandra Maria Galheigo

    2015-09-01

    Full Text Available This article presents the results of a participatory action research with occupational therapists in a community of practice which purpose was to discuss the care production provided by occupational therapy to hospitalized children and adolescents. The participants were nine occupational therapists from hospitals of the city of São Paulo. Ten face-to-face meetings were conducted and a Web-mediated environment was created for conducting virtual activities. The face meetings were recorded and tapped. This article aims to present the evaluation made by the participants and researchers about the process experienced in the community. Through content analysis, seventeen reporting units were identified and grouped into four main themes: the dialogic process; theoretical and practical implications; reflective process; participatory process and its barriers. The process evaluation showed that dialogue during the meetings contributed to a sense of belonging, integration, and awareness/group cohesion and made possible discussing and reflecting on topics relevant to the practice of occupational therapist. Direct communication proved to be the main form of exchange among the professionals in the group. The participants working conditions, the computers and virtual environments access issues, the surplus work generated by meetings and the displacement in urban centers were complicating factors for the participant’s greater adhesion. Evaluation showed that this strategy favored the construction of shared knowledge, and its implementation can foster reflection, research development and knowledge production, as well as contribute to the occupational therapist professional practice improvement.

  16. Evolution of the Power Processing Units Architecture for Electric Propulsion at CRISA

    Science.gov (United States)

    Palencia, J.; de la Cruz, F.; Wallace, N.

    2008-09-01

    Since 2002, the team formed by EADS Astrium CRISA, Astrium GmbH Friedrichshafen, and QinetiQ has participated in several flight programs where the Electric Propulsion based on Kaufman type Ion Thrusters is the baseline conceptOn 2002, CRISA won the contract for the development of the Ion Propulsion Control Unit (IPCU) for GOCE. This unit together with the T5 thruster by QinetiQ provides near perfect atmospheric drag compensation offering thrust levels in the range of 1 to 20mN.By the end of 2003, CRISA started the adaptation of the IPCU concept to the QinetiQ T6 Ion Thruster for the Alphabus program.This paper shows how the Power Processing Unit design evolved in time including the current developments.

  17. United States private-sector physicians and pharmaceutical contract research: a qualitative study.

    Science.gov (United States)

    Fisher, Jill A; Kalbaugh, Corey A

    2012-01-01

    There have been dramatic increases over the past 20 years in the number of nonacademic, private-sector physicians who serve as principal investigators on US clinical trials sponsored by the pharmaceutical industry. However, there has been little research on the implications of these investigators' role in clinical investigation. Our objective was to study private-sector clinics involved in US pharmaceutical clinical trials to understand the contract research arrangements supporting drug development, and specifically how private-sector physicians engaged in contract research describe their professional identities. We conducted a qualitative study in 2003-2004 combining observation at 25 private-sector research organizations in the southwestern United States and 63 semi-structured interviews with physicians, research staff, and research participants at those clinics. We used grounded theory to analyze and interpret our data. The 11 private-sector physicians who participated in our study reported becoming principal investigators on industry clinical trials primarily because contract research provides an additional revenue stream. The physicians reported that they saw themselves as trial practitioners and as businesspeople rather than as scientists or researchers. Our findings suggest that in addition to having financial motivation to participate in contract research, these US private-sector physicians have a professional identity aligned with an industry-based approach to research ethics. The generalizability of these findings and whether they have changed in the intervening years should be addressed in future studies. Please see later in the article for the Editors' Summary.

  18. United States private-sector physicians and pharmaceutical contract research: a qualitative study.

    Directory of Open Access Journals (Sweden)

    Jill A Fisher

    Full Text Available There have been dramatic increases over the past 20 years in the number of nonacademic, private-sector physicians who serve as principal investigators on US clinical trials sponsored by the pharmaceutical industry. However, there has been little research on the implications of these investigators' role in clinical investigation. Our objective was to study private-sector clinics involved in US pharmaceutical clinical trials to understand the contract research arrangements supporting drug development, and specifically how private-sector physicians engaged in contract research describe their professional identities.We conducted a qualitative study in 2003-2004 combining observation at 25 private-sector research organizations in the southwestern United States and 63 semi-structured interviews with physicians, research staff, and research participants at those clinics. We used grounded theory to analyze and interpret our data. The 11 private-sector physicians who participated in our study reported becoming principal investigators on industry clinical trials primarily because contract research provides an additional revenue stream. The physicians reported that they saw themselves as trial practitioners and as businesspeople rather than as scientists or researchers.Our findings suggest that in addition to having financial motivation to participate in contract research, these US private-sector physicians have a professional identity aligned with an industry-based approach to research ethics. The generalizability of these findings and whether they have changed in the intervening years should be addressed in future studies. Please see later in the article for the Editors' Summary.

  19. FFUSION yearbook 1996. Annual report of the Finnish research unit. Association EURATOM-TEKES

    Energy Technology Data Exchange (ETDEWEB)

    Karttunen, S; Paettikangas, T [eds.; VTT Energy, Espoo (Finland)

    1997-05-01

    Finnish fusion programme (FFUSION) is one of the eleven national energy research programmes funded by the Technological Development Centre of Finland (TEKES). The FFUSION programme was fully integrated into European Fusion Programme just after Finland joined the European Union. The contract of Association Euratom and Tekes was signed in 1995 and extends to the end of 1999. Finland became a member of JET Joint Undertaking in 1996, other contracts with Euratom include NET agreement and the Staff Mobility Agreement. FFUSION programme with participating research institutes and universities forms the Fusion Research Unit of the Association Euratom-Tekes. This annual report summarises the research activities of the Finnish Research Unit in 1996. The programme consists of two parts: Physics and Technology. The research areas of the physics are: Fusion plasma engineering, Radio-frequency heating and plasma diagnostics, and Plasma-wall interactions - ion-beam studies. The technology is focused into three areas: Fusion reactor materials (first wall components and joining techniques), Remote handling and viewing systems, and Superconductors

  20. The role of Clinical Trial Units in investigator- and industry-initiated research projects.

    Science.gov (United States)

    von Niederhäusern, Belinda; Fabbro, Thomas; Pauli-Magnus, Christiane

    2015-01-01

    Six multidisciplinary competence centres (Clinical Trial Units, CTUs) in Basel, Berne, Geneva, Lausanne, St. Gallen and Zurich provide professional support to clinical researchers in the planning, implementation, conduct and evaluation of clinical studies. Through their coordinated network, these units promote high-quality, nationally harmonised and internationally standardised clinical research conduct in Switzerland. We will describe why this network has been established, how it has been successful in stilling the growing need for clinical research support, which training and education opportunities it offers, and how it created national awareness for the still-existing hurdles towards clinical research excellence in Switzerland. Taking the CTU Basel as an example, we show that a considerable number (25%) of the studies submitted for regulatory approval in 2013 were supported by the CTU, decreasing the number of findings in ethics reviews by about one-third. We conclude that these achievements, together with a Swiss national funding model for clinical research, and improved national coordination, will be critical factors to successfully position Swiss clinical research at the international forefront.

  1. Moving into the 21st century - The United States' Research Reactor Spent Nuclear Fuel Acceptance Program

    International Nuclear Information System (INIS)

    Huizenga, David G.; Mustin, Tracy P.; Saris, Elizabeth C.; Reilly, Jill E.

    1999-01-01

    Since 1996, when the United States Department of Energy and the Department of State jointly adopted the Nuclear Weapons Nonproliferation Policy Concerning Foreign Research Reactor Spent Nuclear Fuel, twelve shipments totaling 2,985 MTR and TRIGA spent nuclear fuel assemblies from research reactors around the world have been accepted into the United States. These shipments have contained approximately 1.7 metric tons of HEU and 0.6 metric tons of LEU. Foreign research reactor operators played a significant role in this success. A new milestone in the acceptance program occurred during the summer of 1999 with the arrival of TRIGA spent nuclear fuel from Europe through the Charleston Naval Weapons Station via the Savannah River Site to the Idaho National Engineering and Environmental Laboratory. This shipment consisted of five casks of TRIGA spent nuclear fuel from research reactors in Germany, Italy, Slovenia, and Romania. These casks were transported by truck approximately 2,400 miles across the United States (one cask packaged in an ISO container per truck). Drawing upon lessons learned in previous shipments, significant technical, legal, and political challenges were addressed to complete this cross-country shipment. Other program activities since the last RERTR meeting have included: formulation of a methodology to determine the quantity of spent nuclear fuel in a damaged condition that may be transported in a particular cask (containment analysis for transportation casks); publication of clarification of the fee policy; and continued planning for the outyears of the acceptance policy including review of reactors and eligible material quantities. The United States Foreign Research Reactor Spent Nuclear Fuel Acceptance Program continues to demonstrate success due to the continuing commitment between the United States and the research reactor community to make this program work. We strongly encourage all eligible research reactors to decide as soon as possible to

  2. [Analysis of the safety culture in a Cardiology Unit managed by processes].

    Science.gov (United States)

    Raso-Raso, Rafael; Uris-Selles, Joaquín; Nolasco-Bonmatí, Andreu; Grau-Jornet, Guillermo; Revert-Gandia, Rosa; Jiménez-Carreño, Rebeca; Sánchez-Soriano, Ruth M; Chamorro-Fernández, Carlos I; Marco-Francés, Elvira; Albero-Martínez, José V

    2017-04-04

    Safety culture is one of the requirements for preventing the occurrence of adverse effects. However, this has not been studied in the field of cardiology. The aim of this study is to evaluate the safety culture in a cardiology unit that has implemented and certified an integrated quality and risk management system for patient safety. A cross-sectional observational study was conducted in 2 consecutive years, with all staff completing the Spanish version of the questionnaire, "Hospital Survey on Patient Safety Culture" of the "Agency for Healthcare Research and Quality", with 42 items grouped into 12 dimensions. The percentage of positive responses in each dimension in 2014 and 2015 were compared, as well as national data and United States data, following the established rules. The overall assessment out of a possible 5, was 4.5 in 2014 and 4.7 in 2015. Seven dimensions were identified as strengths. The worst rated were: staffing, management support and teamwork between units. The comparison showed superiority in all dimensions compared to national data, and in 8 of them compared to American data. The safety culture in a Cardiology Unit with an integrated quality and risk management patient safety system is high, and higher than nationally in all its dimensions and in most of them compared to the United States. Copyright © 2017 Instituto Nacional de Cardiología Ignacio Chávez. Publicado por Masson Doyma México S.A. All rights reserved.

  3. FLOCKING-BASED DOCUMENT CLUSTERING ON THE GRAPHICS PROCESSING UNIT [Book Chapter

    Energy Technology Data Exchange (ETDEWEB)

    Charles, J S; Patton, R M; Potok, T E; Cui, X

    2008-01-01

    Analyzing and grouping documents by content is a complex problem. One explored method of solving this problem borrows from nature, imitating the fl ocking behavior of birds. Each bird represents a single document and fl ies toward other documents that are similar to it. One limitation of this method of document clustering is its complexity O(n2). As the number of documents grows, it becomes increasingly diffi cult to receive results in a reasonable amount of time. However, fl ocking behavior, along with most naturally inspired algorithms such as ant colony optimization and particle swarm optimization, are highly parallel and have experienced improved performance on expensive cluster computers. In the last few years, the graphics processing unit (GPU) has received attention for its ability to solve highly-parallel and semi-parallel problems much faster than the traditional sequential processor. Some applications see a huge increase in performance on this new platform. The cost of these high-performance devices is also marginal when compared with the price of cluster machines. In this paper, we have conducted research to exploit this architecture and apply its strengths to the document flocking problem. Our results highlight the potential benefi t the GPU brings to all naturally inspired algorithms. Using the CUDA platform from NVIDIA®, we developed a document fl ocking implementation to be run on the NVIDIA® GEFORCE 8800. Additionally, we developed a similar but sequential implementation of the same algorithm to be run on a desktop CPU. We tested the performance of each on groups of news articles ranging in size from 200 to 3,000 documents. The results of these tests were very signifi cant. Performance gains ranged from three to nearly fi ve times improvement of the GPU over the CPU implementation. This dramatic improvement in runtime makes the GPU a potentially revolutionary platform for document clustering algorithms.

  4. The United States foreign research reactor spent nuclear fuel acceptance program: Proposal to modify the program

    International Nuclear Information System (INIS)

    Messick, C.E.

    2005-01-01

    The United States Department of Energy (DOE), in consultation with the Department of State (DOS), adopted the Nuclear Weapons Nonproliferation Policy Concerning Foreign Research Reactor Spent Nuclear Fuel in May 1996. The policy was slated to expire in May 2009. However, in October 2003, a petition requesting a program extension was delivered to the United States Secretary of Energy from a group of research reactor operators from foreign countries. In April 2004, the Secretary directed DOE undertake an analysis, as required by the National Environmental Policy Act (NEPA), to consider potential extension of the Program. On December 1, 2004, a Federal Register Notice was issued approving the program extension. This paper discusses the findings from the NEPA analysis and the potential changes in the program that may result from implementation of the proposed changes. (author)

  5. Status Report from the United Kingdom [Processing of Low-Grade Uranium Ores

    Energy Technology Data Exchange (ETDEWEB)

    North, A A [Warren Spring Laboratory, Stevenage, Herts. (United Kingdom)

    1967-06-15

    The invitation to present this status report could have been taken literally as a request for information on experience gained in the actual processing of low-grade uranium ores in the United Kingdom, in which case there would have been very little to report; however, the invitation naturally was considered to be a request for a report on the experience gained by the United Kingdom of the processing of uranium ores. Lowgrade uranium ores are not treated in the United Kingdom simply because the country does not possess any known significant deposits of uranium ore. It is of interest to record the fact that during the nineteenth century mesothermal vein deposits associated with Hercynian granite were worked at South Terras, Cornwall, and ore that contained approximately 100 tons of uranium oxide was exported to Germany. Now only some 20 tons of contained uranium oxide remain at South Terras; also in Cornwall there is a small number of other vein deposits that each hold about five tons of uranium. Small lodes of uranium ore have been located in the southern uplands of Scotland; in North Wales lower palaeozoic black shales have only as much as 50 to 80 parts per million of uranium oxide, and a slightly lower grade carbonaceous shale is found near the base of the millstone grit that occurs in the north of England. Thus the experience gained by the United Kingdom has been of the treatment of uranium ores that occur abroad.

  6. Quantum information processing and communication : Strategic report on current status, visions and goals for research in Europe

    NARCIS (Netherlands)

    Kouwenhoven, L.; Mooij, J.E.

    2005-01-01

    e present an excerpt of the document “Quantum Information Processing and Communication: Strategic report on current status, visions and goals for research in Europe”, which has been recently published in electronic form at the website of FET (the Future and Emerging Technologies Unit of the

  7. Operating The Central Process Systems At Glenn Research Center

    Science.gov (United States)

    Weiler, Carly P.

    2004-01-01

    As a research facility, the Glenn Research Center (GRC) trusts and expects all the systems, controlling their facilities to run properly and efficiently in order for their research and operations to occur proficiently and on time. While there are many systems necessary for the operations at GRC, one of those most vital systems is the Central Process Systems (CPS). The CPS controls operations used by GRC's wind tunnels, propulsion systems lab, engine components research lab, and compressor, turbine and combustor test cells. Used widely throughout the lab, it operates equipment such as exhausters, chillers, cooling towers, compressors, dehydrators, and other such equipment. Through parameters such as pressure, temperature, speed, flow, etc., it performs its primary operations on the major systems of Electrical Dispatch (ED), Central Air Dispatch (CAD), Central Air Equipment Building (CAEB), and Engine Research Building (ERB). In order for the CPS to continue its operations at Glenn, a new contract must be awarded. Consequently, one of my primary responsibilities was assisting the Source Evaluation Board (SEB) with the process of awarding the recertification contract of the CPS. The job of the SEB was to evaluate the proposals of the contract bidders and then to present their findings to the Source Selecting Official (SSO). Before the evaluations began, the Center Director established the level of the competition. For this contract, the competition was limited to those companies classified as a small, disadvantaged business. After an industry briefing that explained to qualified companies the CPS and type of work required, each of the interested companies then submitted proposals addressing three components: Mission Suitability, Cost, and Past Performance. These proposals were based off the Statement of Work (SOW) written by the SEB. After companies submitted their proposals, the SEB reviewed all three components and then presented their results to the SSO. While the

  8. Translational Research in Pediatrics IV: Solid Tissue Collection and Processing.

    Science.gov (United States)

    Gillio-Meina, Carolina; Zielke, H Ronald; Fraser, Douglas D

    2016-01-01

    Solid tissues are critical for child-health research. Specimens are commonly obtained at the time of biopsy/surgery or postmortem. Research tissues can also be obtained at the time of organ retrieval for donation or from tissue that would otherwise have been discarded. Navigating the ethics of solid tissue collection from children is challenging, and optimal handling practices are imperative to maximize tissue quality. Fresh biopsy/surgical specimens can be affected by a variety of factors, including age, gender, BMI, relative humidity, freeze/thaw steps, and tissue fixation solutions. Postmortem tissues are also vulnerable to agonal factors, body storage temperature, and postmortem intervals. Nonoptimal tissue handling practices result in nucleotide degradation, decreased protein stability, artificial posttranslational protein modifications, and altered lipid concentrations. Tissue pH and tryptophan levels are 2 methods to judge the quality of solid tissue collected for research purposes; however, the RNA integrity number, together with analyses of housekeeping genes, is the new standard. A comprehensive clinical data set accompanying all tissue samples is imperative. In this review, we examined: the ethical standards relating to solid tissue procurement from children; potential sources of solid tissues; optimal practices for solid tissue processing, handling, and storage; and reliable markers of solid tissue quality. Copyright © 2016 by the American Academy of Pediatrics.

  9. Research priorities for specialized nursing practice in the United Arab Emirates.

    Science.gov (United States)

    Al-Yateem, N; Al-Tamimi, M; Brenner, M; Altawil, H; Ahmad, A; Brownie, S

    2017-08-25

    Globally, nurses are undertaking expanded and more specialized roles in healthcare planning and service delivery in response to changing patterns and levels of health service demand. This means the nursing profession is increasingly considered as leaders in health service policy, research and practice. The United Arab Emirates has strengthened nursing governance and practice by establishing a Nursing and Midwifery Council and increasing the activity of nursing specialization, service leadership and research. This study aimed to identify clinically relevant research priorities to facilitate nursing contributions to evidence-based care and strengthening health services in the country. A two-stage Delphi study design was used. The first round involved 783 participants. The second round involved 1116 participants, as more clinical settings were accessed. In total, 58 research priorities across a variety of nursing specialties (paediatrics, emergency care, intensive care, labour and maternity care, operating theatre and long-term care) were identified as highly important. These identified priorities will guide a more informed programme of research in each nursing specialty, with the aim of strengthening the evidence base to improving outcomes for patients and their families in the United Arab Emirates. The findings provide guidance on key areas for nurses to focus research contributions to enhance evidence-based care and strengthen health systems. The identified priorities may also guide researchers in academic institutions to conduct research informed by current, clinically relevant issues. The findings may help inform funders and policymakers to support allocation of funding to research that has potential to contribute to enhancing nursing care in specialist areas. © 2017 International Council of Nurses.

  10. Research process of nondestructive testing pitting corrosion in metal material

    Directory of Open Access Journals (Sweden)

    Bo ZHANG

    2017-12-01

    Full Text Available Pitting corrosion directly affects the usability and service life of metal material, so the effective nondestructive testing and evaluation on pitting corrosion is of great significance for fatigue life prediction because of data supporting. The features of pitting corrosion are elaborated, and the relation between the pitting corrosion parameters and fatigue performance is pointed out. Through introducing the fundamental principles of pitting corrosion including mainly magnetic flux leakage inspection, pulsed eddy current and guided waves, the research status of nondestructive testing technology for pitting corrosion is summarized, and the key steps of nondestructive testing technologies are compared and analyzed from the theoretical model, signal processing to industrial applications. Based on the analysis of the signal processing specificity of different nondestructive testing technologies in detecting pitting corrosion, the visualization combined with image processing and signal analysis are indicated as the critical problems of accurate extraction of pitting defect information and quantitative characterization for pitting corrosion. The study on non-contact nondestructive testing technologies is important for improving the detection precision and its application in industries.

  11. Modeling of yield and environmental impact categories in tea processing units based on artificial neural networks.

    Science.gov (United States)

    Khanali, Majid; Mobli, Hossein; Hosseinzadeh-Bandbafha, Homa

    2017-12-01

    In this study, an artificial neural network (ANN) model was developed for predicting the yield and life cycle environmental impacts based on energy inputs required in processing of black tea, green tea, and oolong tea in Guilan province of Iran. A life cycle assessment (LCA) approach was used to investigate the environmental impact categories of processed tea based on the cradle to gate approach, i.e., from production of input materials using raw materials to the gate of tea processing units, i.e., packaged tea. Thus, all the tea processing operations such as withering, rolling, fermentation, drying, and packaging were considered in the analysis. The initial data were obtained from tea processing units while the required data about the background system was extracted from the EcoInvent 2.2 database. LCA results indicated that diesel fuel and corrugated paper box used in drying and packaging operations, respectively, were the main hotspots. Black tea processing unit caused the highest pollution among the three processing units. Three feed-forward back-propagation ANN models based on Levenberg-Marquardt training algorithm with two hidden layers accompanied by sigmoid activation functions and a linear transfer function in output layer, were applied for three types of processed tea. The neural networks were developed based on energy equivalents of eight different input parameters (energy equivalents of fresh tea leaves, human labor, diesel fuel, electricity, adhesive, carton, corrugated paper box, and transportation) and 11 output parameters (yield, global warming, abiotic depletion, acidification, eutrophication, ozone layer depletion, human toxicity, freshwater aquatic ecotoxicity, marine aquatic ecotoxicity, terrestrial ecotoxicity, and photochemical oxidation). The results showed that the developed ANN models with R 2 values in the range of 0.878 to 0.990 had excellent performance in predicting all the output variables based on inputs. Energy consumption for

  12. Re-visioning the doctoral research degree in nursing in the United Kingdom.

    Science.gov (United States)

    Burton, Christopher R; Duxbury, Joy; French, Beverley; Monks, Rob; Carter, Bernie

    2009-05-01

    In the light of concerns about the wider social and economic value of the PhD training programme, this article discusses the challenges being directed primarily at the traditional doctoral programme of study. While the PhD is primarily concerned with the student making an original contribution to knowledge, the value-added component of the doctoral research degree needs to respond to the needs of a wider market of purchasers, and to meet practice and policy requirements for research leadership. The United Kingdom Research Councils (UK GRAD, 2001. Joint Skills Statement of Skills Training Requirements. Available at http://www.grad.ac.uk/downloads/documents/general/Joint%20Skills%20Statementpdf. (last accessed 1st April 2008.) suggest a range of seven skill domains over and above research design and management that should be offered to students. The seven domains are research skills and techniques, participation in the research environment, research management, personal effectiveness, communication, networking and team working, and career management. This article develops and extends these skill domains for the current healthcare context and considers how these should guide the development and evaluation of the value-added components of doctoral research degree programmes in nursing. The challenges that these issues present to academic departments are also discussed. Our conclusion is that PhD research training needs re-visioning and broadening so that the students' experience includes these value-added components.

  13. Main research activities at the Institute of Energy Process Engineering Research Centre Juelich Germany

    International Nuclear Information System (INIS)

    Achenbach, E.

    1995-06-01

    This report summarizes four lectures been held during the author's seven-week stay at the Department of High Temperature Engineering in the period from February 2nd to March 23rd in 1995 under the JAERI foreign researcher inviting program. Though the Institute of Energy Process Engineering(IEV) in the Research Centre Juelich(KFA), has recently changed the subject of research from nuclear technology of high-temperature gas-cooled reactors(HTGRs) to fuel cell technology, there are many common items of research. In particular, the following topics presented in the lectures are of mutual interest: 1)Methane-steam reforming used at JAERI as HTGR heat utilization system and applied at KFA to internal reforming in the high temperature Solid Oxide Fuel Cell(SOFC), 2)Technology and modeling of high temperature electrolysis at JAERI as the inverse process of the SOFC developed at KFA, 3)Flow simulation of branched systems treated at JAERI for the development of high temperature heat exchangers and performed at KFA with respect to the SOFC manifold system, 4)Fundamental aspects of heat and mass transfer. The report should help to create a basis of discussing the above mentioned problems and to stimulate the research work at JAERI. (author)

  14. Morphology study of thoracic transverse processes and its significance in pedicle-rib unit screw fixation.

    Science.gov (United States)

    Cui, Xin-gang; Cai, Jin-fang; Sun, Jian-min; Jiang, Zhen-song

    2015-03-01

    Thoracic transverse process is an important anatomic structure of the spine. Several anatomic studies have investigated the adjacent structures of the thoracic transverse process. But there is still a blank on the morphology of the thoracic transverse processes. The purpose of the cadaveric study is to investigate the morphology of thoracic transverse processes and to provide morphology basis for the pedicle-rib unit (extrapedicular) screw fixation method. Forty-five adult dehydrated skeletons (T1-T10) were included in this study. The length, width, thickness, and the tilt angle (upward and backward) of the thoracic transverse process were measured. The data were then analyzed statistically. On the basis of the morphometric study, 5 fresh cadavers were used to place screws from transverse processes to the vertebral body in the thoracic spine, and then observed by the naked eye and on computed tomography scans. The lengths of thoracic transverse processes were between 16.63±1.59 and 18.10±1.95 mm; the longest was at T7, and the shortest was at T10. The widths of thoracic transverse processes were between 11.68±0.80 and 12.87±1.48 mm; the widest was at T3, and the narrowest was at T7. The thicknesses of thoracic transverse processes were between 7.86±1.24 and 10.78±1.35 mm; the thickest was at T1, and the thinnest was at T7. The upward tilt angles of thoracic transverse processes were between 24.9±3.1 and 3.0±1.56 degrees; the maximal upward tilt angle was at T1, and the minimal upward tilt angle was at T7. The upward tilt angles of T1 and T2 were obviously different from the other thoracic transverse processes (Ptransverse processes gradually increased from 24.5±2.91 degrees at T1 to 64.5±5.12 degrees at T10. The backward tilt angles were significantly different between each other, except between T5 and T6. In the validation study, screws were all placed successfully from transverse processes to the vertebrae of thoracic spine. The length, width, and

  15. Calculation of the real states of Ignalina NPP Unit 1 and Unit 2 RBMK-1500 reactors in the verification process of QUABOX/CUBBOX code

    International Nuclear Information System (INIS)

    Bubelis, E.; Pabarcius, R.; Demcenko, M.

    2001-01-01

    Calculations of the main neutron-physical characteristics of RBMK-1500 reactors of Ignalina NPP Unit 1 and Unit 2 were performed, taking real reactor core states as the basis for these calculations. Comparison of the calculation results, obtained using QUABOX/CUBBOX code, with experimental data and the calculation results, obtained using STEPAN code, showed that all the main neutron-physical characteristics of the reactors of Unit 1 and Unit 2 of Ignalina NPP are in the safe deviation range of die analyzed parameters, and that reactors of Ignalina NPP, during the process of the reactor core composition change, are operated in a safe and stable manner. (author)

  16. High-Performance Pseudo-Random Number Generation on Graphics Processing Units

    OpenAIRE

    Nandapalan, Nimalan; Brent, Richard P.; Murray, Lawrence M.; Rendell, Alistair

    2011-01-01

    This work considers the deployment of pseudo-random number generators (PRNGs) on graphics processing units (GPUs), developing an approach based on the xorgens generator to rapidly produce pseudo-random numbers of high statistical quality. The chosen algorithm has configurable state size and period, making it ideal for tuning to the GPU architecture. We present a comparison of both speed and statistical quality with other common parallel, GPU-based PRNGs, demonstrating favourable performance o...

  17. Electromagnetic compatibility of tools and automated process control systems of NPP units

    International Nuclear Information System (INIS)

    Alpeev, A.S.

    1994-01-01

    Problems of electromagnetic compatibility of automated process control subsystems in NPP units are discussed. It is emphasized, that at the stage of development of request for proposal for each APC subsystem special attention should be paid to electromagnetic situation in specific room and requirements to the quality of functions performed by the system. Besides, requirements to electromagnetic compatibility tests at the work stations should be formulated, and mock-ups of the subsystems should be tested

  18. State-Level Comparison of Processes and Timelines for Distributed Photovoltaic Interconnection in the United States

    Energy Technology Data Exchange (ETDEWEB)

    Ardani, K. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Davidson, C. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Margolis, R. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Nobler, E. [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2015-01-01

    This report presents results from an analysis of distributed photovoltaic (PV) interconnection and deployment processes in the United States. Using data from more than 30,000 residential (up to 10 kilowatts) and small commercial (10-50 kilowatts) PV systems, installed from 2012 to 2014, we assess the range in project completion timelines nationally (across 87 utilities in 16 states) and in five states with active solar markets (Arizona, California, New Jersey, New York, and Colorado).

  19. Meeting a Binational Research Challenge: Substance Abuse Among Transnational Mexican Farmworkers in the United States

    Science.gov (United States)

    Garcia, Victor

    2011-01-01

    To help in understanding the manner in which community, individual, and other factors in the United States and Mexico contribute to drug use among transnational migrants, this paper introduces a binational social ecology model of substance abuse in this population. We draw on our 2 NIH-funded ethnographic studies—1 on problem drinking and the other on drug abuse—among transnational Mexican workers in the mushroom industry of southeastern Pennsylvania. Our model demonstrates that major reasons for substance abuse among transnational migrants include nontraditional living arrangements in labor camps and overcrowded apartments, the absence of kin and community deterrents to drug use, social isolation, the presence of drug use and binge drinking subcultures, the availability of drugs, family history of drugs, previous drug use or witnessing of drug use in Mexico, and drug use norms and drug availability in Mexico. It suggests the need for US and Mexican researchers to collaborate in binational teams and address factors on both sides of the border. Our binational social ecology model, together with our research recommendations, will assist alcohol and drug researchers to discover how community and individual factors in both the United States and abroad fit and interact beyond mere association and provide a more comprehensive research approach to substance abuse research among transnational migrants. PMID:18237326

  20. Characteristics and lessons learned from practice-based research networks (PBRNs in the United States

    Directory of Open Access Journals (Sweden)

    Keller S

    2012-09-01

    Full Text Available Melinda M Davis,1,2 Sara Keller,1 Jennifer E DeVoe,1,3 Deborah J Cohen11Department of Family Medicine, 2Oregon Rural Practice-based Research Network, Oregon Health & Science University, Portland, OR, USA; 3OCHIN Practice-based Research Network, Portland, OR, USAAbstract: Practice-based research networks (PBRNs are organizations that involve practicing clinicians in asking and answering clinically relevant research questions. This review explores the origins, characteristics, funding, and lessons learned through practice-based research in the United States. Primary care PBRNs emerged in the USA in the 1970s. Early studies explored the etiology of common problems encountered in primary care practices (eg, headache, miscarriage, demonstrating the gap between research conducted in controlled specialty settings and real-world practices. Over time, national initiatives and an evolving funding climate have shaped PBRN development, contributing to larger networks, a push for shared electronic health records, and the use of a broad range of research methodologies (eg, observational studies, pragmatic randomized controlled trials, continuous quality improvement, participatory methods. Today, there are over 160 active networks registered with the Agency for Healthcare Research and Quality's PBRN Resource Center that engage primary care clinicians, pharmacists, dentists, and other health care professionals in research and quality-improvement initiatives. PBRNs provide an important laboratory for encouraging collaborative research partnerships between academicians and practices or communities to improve population health, conduct comparative effectiveness and patient-centered outcomes research, and study health policy reform. PBRNs continue to face critical challenges that include: (1 adapting to a changing landscape; (2 recruiting and retaining membership; (3 securing infrastructure support; (4 straddling two worlds (academia and community and managing

  1. The impact of a lean rounding process in a pediatric intensive care unit.

    Science.gov (United States)

    Vats, Atul; Goin, Kristin H; Villarreal, Monica C; Yilmaz, Tuba; Fortenberry, James D; Keskinocak, Pinar

    2012-02-01

    Poor workflow associated with physician rounding can produce inefficiencies that decrease time for essential activities, delay clinical decisions, and reduce staff and patient satisfaction. Workflow and provider resources were not optimized when a pediatric intensive care unit increased by 22,000 square feet (to 33,000) and by nine beds (to 30). Lean methods (focusing on essential processes) and scenario analysis were used to develop and implement a patient-centric standardized rounding process, which we hypothesize would lead to improved rounding efficiency, decrease required physician resources, improve satisfaction, and enhance throughput. Human factors techniques and statistical tools were used to collect and analyze observational data for 11 rounding events before and 12 rounding events after process redesign. Actions included: 1) recording rounding events, times, and patient interactions and classifying them as essential, nonessential, or nonvalue added; 2) comparing rounding duration and time per patient to determine the impact on efficiency; 3) analyzing discharge orders for timeliness; 4) conducting staff surveys to assess improvements in communication and care coordination; and 5) analyzing customer satisfaction data to evaluate impact on patient experience. Thirty-bed pediatric intensive care unit in a children's hospital with academic affiliation. Eight attending pediatric intensivists and their physician rounding teams. Eight attending physician-led teams were observed for 11 rounding events before and 12 rounding events after implementation of a standardized lean rounding process focusing on essential processes. Total rounding time decreased significantly (157 ± 35 mins before vs. 121 ± 20 mins after), through a reduction in time spent on nonessential (53 ± 30 vs. 9 ± 6 mins) activities. The previous process required three attending physicians for an average of 157 mins (7.55 attending physician man-hours), while the new process required two

  2. Modelling of a Naphtha Recovery Unit (NRU with Implications for Process Optimization

    Directory of Open Access Journals (Sweden)

    Jiawei Du

    2018-06-01

    Full Text Available The naphtha recovery unit (NRU is an integral part of the processes used in the oil sands industry for bitumen extraction. The principle role of the NRU is to recover naphtha from the tailings for reuse in this process. This process is energy-intensive, and environmental guidelines for naphtha recovery must be met. Steady-state models for the NRU system are developed in this paper using two different approaches. The first approach is a statistical, data-based modelling approach where linear regression models have been developed using Minitab® from plant data collected during a performance test. The second approach involves the development of a first-principles model in Aspen Plus® based on the NRU process flow diagram. A novel refinement to this latter model, called “withdraw and remix”, is proposed based on comparing actual plant data to model predictions around the two units used to separate water and naphtha. The models developed in this paper suggest some interesting ideas for the further optimization of the process, in that it may be possible to achieve the required naphtha recovery using less energy. More plant tests are required to validate these ideas.

  3. PREMATH: a Precious-Material Holdup Estimator for unit operations and chemical processes

    International Nuclear Information System (INIS)

    Krichinsky, A.M.; Bruns, D.D.

    1982-01-01

    A computer program, PREMATH (Precious Material Holdup Estimator), has been developed to permit inventory estimation in vessels involved in unit operations and chemical processes. This program has been implemented in an operating nuclear fuel processing plant. PREMATH's purpose is to provide steady-state composition estimates for material residing in process vessels until representative samples can be obtained and chemical analyses can be performed. Since these compositions are used for inventory estimation, the results are determined for and cataloged in container-oriented files. The estimated compositions represent material collected in applicable vessels - including consideration for material previously acknowledged in these vessels. The program utilizes process measurements and simple material balance models to estimate material holdups and distribution within unit operations. During simulated run testing, PREMATH-estimated inventories typically produced material balances within 7% of the associated measured material balances for uranium and within 16% of the associated, measured material balances for thorium (a less valuable material than uranium) during steady-state process operation

  4. Design of Biochemical Oxidation Process Engineering Unit for Treatment of Organic Radioactive Liquid Waste

    International Nuclear Information System (INIS)

    Zainus Salimin; Endang Nuraeni; Mirawaty; Tarigan, Cerdas

    2010-01-01

    Organic radioactive liquid waste from nuclear industry consist of detergent waste from nuclear laundry, 30% TBP-kerosene solvent waste from purification or recovery of uranium from process failure of nuclear fuel fabrication, and solvent waste containing D 2 EHPA, TOPO, and kerosene from purification of phosphoric acid. The waste is dangerous and toxic matter having low pH, high COD and BOD, and also low radioactivity. Biochemical oxidation process is the effective method for detoxification of organic waste and decontamination of radionuclide by bio sorption. The result process are sludges and non radioactive supernatant. The existing treatment facilities radioactive waste in Serpong can not use for treatment of that’s organics waste. Dio chemical oxidation process engineering unit for continuous treatment of organic radioactive liquid waste on the capacity of 1.6 L/h has been designed and constructed the equipment of process unit consist of storage tank of 100 L capacity for nutrition solution, 2 storage tanks of 100 L capacity per each for liquid waste, reactor oxidation of 120 L, settling tank of 50 L capacity storage tank of 55 L capacity for sludge, storage tank of 50 capacity for supernatant. Solution on the reactor R-01 are added by bacteria, nutrition and aeration using two difference aerators until biochemical oxidation occurs. The sludge from reactor of R-01 are recirculated to the settling tank of R-02 and on the its reverse operation biological sludge will be settled, and supernatant will be overflow. (author)

  5. What should autism research focus upon? Community views and priorities from the United Kingdom

    Science.gov (United States)

    Dinsmore, Adam; Charman, Tony

    2014-01-01

    The rise in the measured prevalence of autism has been accompanied by much new research and research investment internationally. This study sought to establish whether the pattern of current UK autism research funding maps on to the concerns of the autism community. Interviews and focus groups were conducted with autistic adults, family members, practitioners and researchers to identify their priorities for research. We also captured the views of a large number of stakeholders via an online survey. There was a clear disparity between the United Kingdom’s pattern of funding for autism research and the priorities articulated by the majority of participants. There was general consensus that future priorities for autism research should lie in those areas that make a difference to people’s day-to-day lives. There needs to be greater involvement of the autism community both in priority setting and in research more broadly to ensure that resources reach where they are most needed and can make the most impact. PMID:24789871

  6. Proceedings of the First International Research Workshop for Process Improvement in Small Settings, 2005

    National Research Council Canada - National Science Library

    Garcia, Suzanne; Graettinger, Caroline; Kost, Keith

    2006-01-01

    .... Attendees from Australia, Canada, Chile, China, Germany, Ireland, India, Japan, Malaysia, Mexico, Spain, and the United States discussed the challenges of process improvement in small and medium size...

  7. Research nurses in New Zealand intensive care units: A qualitative descriptive study.

    Science.gov (United States)

    Mackle, Diane; Nelson, Katherine

    2018-04-20

    This study explored the role of the research nurse in New Zealand (NZ) Level III intensive care units (ICU). Little was known about this role in NZ prior to this study. To describe the role and responsibilities of NZ ICU research nurses. A qualitative, descriptive approach, using semi structured interviews was used. The study was conducted in six Level III ICUs throughout NZ that employed a research nurse. Interviews were conducted with research nurses (n = 11), principal investigators (n = 6) and nurse managers (n = 6), and the findings were triangulated. The views across all ICUs and stakeholders were generally similar, with differences only being in some operational areas. This study found that the primary role of the research nurse was trial management, where they coordinated all elements of trial conduct. Almost half of the research nurses were involved in trial design through their positions on management committees. Research nurses also played a vital role in patient and trial advocacy, and they bridged the knowledge gap by bringing research to staff nurses, patients and their families. The majority of research nurses reported to a nursing line manager, and had an informal accountability to the PI. The role of NZ ICU research nurses is similar to their international counterparts. This study provides clarity about the research nurse role and showcases their key contribution in ensuring that NZ ICUs undertake high quality research, thus contributing to potential improvements for future patients' outcomes. Copyright © 2018 Australian College of Critical Care Nurses Ltd. Published by Elsevier Ltd. All rights reserved.

  8. General Purpose Graphics Processing Unit Based High-Rate Rice Decompression and Reed-Solomon Decoding

    Energy Technology Data Exchange (ETDEWEB)

    Loughry, Thomas A. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-02-01

    As the volume of data acquired by space-based sensors increases, mission data compression/decompression and forward error correction code processing performance must likewise scale. This competency development effort was explored using the General Purpose Graphics Processing Unit (GPGPU) to accomplish high-rate Rice Decompression and high-rate Reed-Solomon (RS) decoding at the satellite mission ground station. Each algorithm was implemented and benchmarked on a single GPGPU. Distributed processing across one to four GPGPUs was also investigated. The results show that the GPGPU has considerable potential for performing satellite communication Data Signal Processing, with three times or better performance improvements and up to ten times reduction in cost over custom hardware, at least in the case of Rice Decompression and Reed-Solomon Decoding.

  9. General purpose graphic processing unit implementation of adaptive pulse compression algorithms

    Science.gov (United States)

    Cai, Jingxiao; Zhang, Yan

    2017-07-01

    This study introduces a practical approach to implement real-time signal processing algorithms for general surveillance radar based on NVIDIA graphical processing units (GPUs). The pulse compression algorithms are implemented using compute unified device architecture (CUDA) libraries such as CUDA basic linear algebra subroutines and CUDA fast Fourier transform library, which are adopted from open source libraries and optimized for the NVIDIA GPUs. For more advanced, adaptive processing algorithms such as adaptive pulse compression, customized kernel optimization is needed and investigated. A statistical optimization approach is developed for this purpose without needing much knowledge of the physical configurations of the kernels. It was found that the kernel optimization approach can significantly improve the performance. Benchmark performance is compared with the CPU performance in terms of processing accelerations. The proposed implementation framework can be used in various radar systems including ground-based phased array radar, airborne sense and avoid radar, and aerospace surveillance radar.

  10. Empirical Research on Spatial Diffusion Process of Knowledge Spillovers

    Science.gov (United States)

    Jin, Xuehui

    2018-02-01

    Firstly, this paper gave a brief review of the core issues of previous studies on spatial distribution of knowledge spillovers. That laid the theoretical foundation for further research. Secondly, this paper roughly described the diffusion process of solar patents in Bejing-Tianjin-Hebei and the Pearl River Delta regions by means of correlation analysis based on patent information of the application date and address of patentee. After that, this paper introduced the variables of spatial distance, knowledge absorptive capacity, knowledge gap and pollution control and built the empirical model of patent, and then collecting data to test them. The results showed that knowledge absorptive capacity was the most significant factor than the other three, followed by the knowledge gap. The influence of spatial distance on knowledge spillovers was limited and the most weak influence factor was pollution control.

  11. Process Improvement to Enhance Quality in a Large Volume Labor and Birth Unit.

    Science.gov (United States)

    Bell, Ashley M; Bohannon, Jessica; Porthouse, Lisa; Thompson, Heather; Vago, Tony

    The goal of the perinatal team at Mercy Hospital St. Louis is to provide a quality patient experience during labor and birth. After the move to a new labor and birth unit in 2013, the team recognized many of the routines and practices needed to be modified based on different demands. The Lean process was used to plan and implement required changes. This technique was chosen because it is based on feedback from clinicians, teamwork, strategizing, and immediate evaluation and implementation of common sense solutions. Through rapid improvement events, presence of leaders in the work environment, and daily huddles, team member engagement and communication were enhanced. The process allowed for team members to offer ideas, test these ideas, and evaluate results, all within a rapid time frame. For 9 months, frontline clinicians met monthly for a weeklong rapid improvement event to create better experiences for childbearing women and those who provide their care, using Lean concepts. At the end of each week, an implementation plan and metrics were developed to help ensure sustainment. The issues that were the focus of these process improvements included on-time initiation of scheduled cases such as induction of labor and cesarean birth, timely and efficient assessment and triage disposition, postanesthesia care and immediate newborn care completed within approximately 2 hours, transfer from the labor unit to the mother baby unit, and emergency transfers to the main operating room and intensive care unit. On-time case initiation for labor induction and cesarean birth improved, length of stay in obstetric triage decreased, postanesthesia recovery care was reorganized to be completed within the expected 2-hour standard time frame, and emergency transfers to the main hospital operating room and intensive care units were standardized and enhanced for efficiency and safety. Participants were pleased with the process improvements and quality outcomes. Working together as a team

  12. Grey water treatment by a continuous process of an electrocoagulation unit and a submerged membrane bioreactor system

    KAUST Repository

    Bani-Melhem, Khalid; Smith, Edward

    2012-01-01

    This paper presents the performance of an integrated process consisting of an electro-coagulation (EC) unit and a submerged membrane bioreactor (SMBR) technology for grey water treatment. For comparison purposes, another SMBR process without

  13. Advanced research and development for plasma processing of polymers with combinatorial plasma-process analyzer

    International Nuclear Information System (INIS)

    Setsuhara, Yuichi; Cho, Ken; Takenaka, Kosuke; Shiratani, Masaharu; Sekine, Makoto; Hori, Masaru

    2010-01-01

    A plasma-process analyzer has been developed on the basis of combinatorial method, in which process examinations with continuous variations of plasma-process conditions can be carried out on a substrate holder with an inclined distribution of process parameters. Combinatorial plasma-process analyses have been demonstrated for examinations of plasma-polymer interactions in terms of etching characteristics and surface morphologies in order to show feasibility and effectiveness of the methodology as advanced research and development for next-generation plasma nano processes. The etching properties and surface morphologies have been investigated for polyethylene terephthalate (PET) films exposed to argon-oxygen mixture plasmas. The etching depth data obtained from three independent batches of the experiments showed universal and almost linear dependence with increasing product of (ion saturation current) x (exposure time); i.e. ion dose. Surface roughness of the polymer slightly increased with increasing ion dose, while the mean spacing after plasma exposure was found to decrease monotonically with increasing ion dose but was saturated at the level of approximately 250 nm.

  14. Overall Assessment of Human Research and Ethics Committees in the United Arab Emirates.

    Science.gov (United States)

    Abdulrahman, Mahera; Nair, Satish Chandrasekhar

    2017-04-01

    Growing demand for human health research in the United Arab Emirates (UAE) has prompted the need to develop a robust research ethics oversight. Examination of the structure, function, and practices of the human research ethics committees (HRECs), followed by evaluation of standards for measuring research output, was conducted. Results indicate that among the HRECs, 90% followed International Council for Harmonization-Good Clinical Practice guidelines, 66.6% have been in operation for more than 5 years, 95% reviewed proposals within 8 weeks, and 56% reviewed for scientific merit apart from ethics. However, systems to recognize accomplishments of researchers, funding transparency, and adverse event reporting were deployed in less than 30% of all HRECs. Research was incorporated into the vision and mission statements of many (65%) organizations. Research publications, collaborations, and recognitions were used to measure research output and report key performance indicators. In spite, resources to generate research output such as dedicated budget (20%), support staff (20%), and continuous training and mentoring program for medical residents (15%) and HREC members (25%) were somehow lacking. HREC structure and operations in the UAE are similar to other regions of the world. Systems to conduct research and report outcomes are defined in the UAE. Regulatory legislation and allocation of resources to support the clinical research enterprise will not only help to meet growing demand for clinical trials but also transform the quality of patient care in the UAE. It is anticipated that the results of this study will benefit investigators, regulators, pharmaceutical sponsors, and the policy makers in the region.

  15. Progress in human embryonic stem cell research in the United States between 2001 and 2010.

    Directory of Open Access Journals (Sweden)

    Keyvan Vakili

    Full Text Available On August 9th, 2001, the federal government of the United States announced a policy restricting federal funds available for research on human embryonic stem cell (hESCs out of concern for the "vast ethical mine fields" associated with the creation of embryos for research purposes. Until the policy was repealed on March 9th, 2009, no U.S. federal funds were available for research on hESCs extracted after August 9, 2001, and only limited federal funds were available for research on a subset of hESC lines that had previously been extracted. This paper analyzes how the 2001 U.S. federal funding restrictions influenced the quantity and geography of peer-reviewed journal publications on hESC. The primary finding is that the 2001 policy did not have a significant aggregate effect on hESC research in the U.S. After a brief lag in early 2000s, U.S. hESC research maintained pace with other areas of stem cell and genetic research. The policy had several other consequences. First, it was tied to increased hESC research funding within the U.S. at the state level, leading to concentration of related activities in a relatively small number of states. Second, it stimulated increased collaborative research between US-based scientists and those in countries with flexible policies toward hESC research (including Canada, the U.K., Israel, China, Spain, and South Korea. Third, it encouraged independent hESC research in countries without restrictions.

  16. A Patient Flow Analysis: Identification of Process Inefficiencies and Workflow Metrics at an Ambulatory Endoscopy Unit

    Directory of Open Access Journals (Sweden)

    Rowena Almeida

    2016-01-01

    Full Text Available Background. The increasing demand for endoscopic procedures coincides with the paradigm shift in health care delivery that emphasizes efficient use of existing resources. However, there is limited literature on the range of endoscopy unit efficiencies. Methods. A time and motion analysis of patient flow through the Hotel-Dieu Hospital (Kingston, Ontario endoscopy unit was followed by qualitative interviews. Procedures were directly observed in three segments: individual endoscopy room use, preprocedure/recovery room, and overall endoscopy unit utilization. Results. Data were collected for 137 procedures in the endoscopy room, 139 procedures in the preprocedure room, and 143 procedures for overall room utilization. The mean duration spent in the endoscopy room was 31.47 min for an esophagogastroduodenoscopy, 52.93 min for a colonoscopy, 30.47 min for a flexible sigmoidoscopy, and 66.88 min for a double procedure. The procedure itself accounted for 8.11 min, 34.24 min, 9.02 min, and 39.13 min for the above procedures, respectively. The focused interviews identified the scheduling template as a major area of operational inefficiency. Conclusions. Despite reasonable procedure times for all except colonoscopies, the endoscopy room durations exceed the allocated times, reflecting the impact of non-procedure-related factors and the need for a revised scheduling template. Endoscopy units have unique operational characteristics and identification of process inefficiencies can lead to targeted quality improvement initiatives.

  17. A Patient Flow Analysis: Identification of Process Inefficiencies and Workflow Metrics at an Ambulatory Endoscopy Unit.

    Science.gov (United States)

    Almeida, Rowena; Paterson, William G; Craig, Nancy; Hookey, Lawrence

    2016-01-01

    Background. The increasing demand for endoscopic procedures coincides with the paradigm shift in health care delivery that emphasizes efficient use of existing resources. However, there is limited literature on the range of endoscopy unit efficiencies. Methods. A time and motion analysis of patient flow through the Hotel-Dieu Hospital (Kingston, Ontario) endoscopy unit was followed by qualitative interviews. Procedures were directly observed in three segments: individual endoscopy room use, preprocedure/recovery room, and overall endoscopy unit utilization. Results. Data were collected for 137 procedures in the endoscopy room, 139 procedures in the preprocedure room, and 143 procedures for overall room utilization. The mean duration spent in the endoscopy room was 31.47 min for an esophagogastroduodenoscopy, 52.93 min for a colonoscopy, 30.47 min for a flexible sigmoidoscopy, and 66.88 min for a double procedure. The procedure itself accounted for 8.11 min, 34.24 min, 9.02 min, and 39.13 min for the above procedures, respectively. The focused interviews identified the scheduling template as a major area of operational inefficiency. Conclusions. Despite reasonable procedure times for all except colonoscopies, the endoscopy room durations exceed the allocated times, reflecting the impact of non-procedure-related factors and the need for a revised scheduling template. Endoscopy units have unique operational characteristics and identification of process inefficiencies can lead to targeted quality improvement initiatives.

  18. Performance Recognition for Sulphur Flotation Process Based on Froth Texture Unit Distribution

    Directory of Open Access Journals (Sweden)

    Mingfang He

    2013-01-01

    Full Text Available As an important indicator of flotation performance, froth texture is believed to be related to operational condition in sulphur flotation process. A novel fault detection method based on froth texture unit distribution (TUD is proposed to recognize the fault condition of sulphur flotation in real time. The froth texture unit number is calculated based on texture spectrum, and the probability density function (PDF of froth texture unit number is defined as texture unit distribution, which can describe the actual textual feature more accurately than the grey level dependence matrix approach. As the type of the froth TUD is unknown, a nonparametric kernel estimation method based on the fixed kernel basis is proposed, which can overcome the difficulty when comparing different TUDs under various conditions is impossible using the traditional varying kernel basis. Through transforming nonparametric description into dynamic kernel weight vectors, a principle component analysis (PCA model is established to reduce the dimensionality of the vectors. Then a threshold criterion determined by the TQ statistic based on the PCA model is proposed to realize the performance recognition. The industrial application results show that the accurate performance recognition of froth flotation can be achieved by using the proposed method.

  19. 40 CFR Appendix Xiii to Part 266 - Mercury Bearing Wastes That May Be Processed in Exempt Mercury Recovery Units

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 26 2010-07-01 2010-07-01 false Mercury Bearing Wastes That May Be Processed in Exempt Mercury Recovery Units XIII Appendix XIII to Part 266 Protection of Environment... XIII to Part 266—Mercury Bearing Wastes That May Be Processed in Exempt Mercury Recovery Units These...

  20. Energy audit and conservation opportunities for pyroprocessing unit of a typical dry process cement plant

    International Nuclear Information System (INIS)

    Kabir, G.; Abubakar, A.I.; El-Nafaty, U.A.

    2010-01-01

    Cement production process has been highly energy and cost intensive. The cement plant requires 8784 h per year of the total operating hours to produce 640,809 tonnes of clinker. To achieve effective and efficient energy management scheme, thermal energy audit analysis was employed on the pyroprocessing unit of the cement plant. Fuel combustion generates the bulk of the thermal energy for the process, amounting to 95.48% (4164.02 kJ/kg cl ) of the total thermal energy input. Thermal efficiency of the unit stands at 41%, below 50-54% achieved in modern plants. The exhaust gases and kiln shell heat energy losses are in significant quantity, amounting to 27.9% and 11.97% of the total heat input respectively. To enhance the energy performance of the unit, heat losses conservation systems are considered. Waste heat recovery steam generator (WHRSG) and Secondary kiln shell were studied. Power and thermal energy savings of 42.88 MWh/year and 5.30 MW can be achieved respectively. Financial benefits for use of the conservation methods are substantial. Environmental benefit of 14.10% reduction in Greenhouse gases (GHG) emissions could be achieved.

  1. Energy audit and conservation opportunities for pyroprocessing unit of a typical dry process cement plant

    Energy Technology Data Exchange (ETDEWEB)

    Kabir, G.; Abubakar, A.I.; El-Nafaty, U.A. [Chemical Engineering Programme, Abubakar Tafawa Balewa University, P. M. B. 0248, Bauchi (Nigeria)

    2010-03-15

    Cement production process has been highly energy and cost intensive. The cement plant requires 8784 h per year of the total operating hours to produce 640,809 tonnes of clinker. To achieve effective and efficient energy management scheme, thermal energy audit analysis was employed on the pyroprocessing unit of the cement plant. Fuel combustion generates the bulk of the thermal energy for the process, amounting to 95.48% (4164.02 kJ/kg{sub cl}) of the total thermal energy input. Thermal efficiency of the unit stands at 41%, below 50-54% achieved in modern plants. The exhaust gases and kiln shell heat energy losses are in significant quantity, amounting to 27.9% and 11.97% of the total heat input respectively. To enhance the energy performance of the unit, heat losses conservation systems are considered. Waste heat recovery steam generator (WHRSG) and Secondary kiln shell were studied. Power and thermal energy savings of 42.88 MWh/year and 5.30 MW can be achieved respectively. Financial benefits for use of the conservation methods are substantial. Environmental benefit of 14.10% reduction in Greenhouse gases (GHG) emissions could be achieved. (author)

  2. Application of the partitive analytical forecasting (PAF) technique to the United States controlled thermonuclear research effort

    International Nuclear Information System (INIS)

    Nichols, S.P.

    1975-01-01

    The Partitive Analytical Forecasting (PAF) technique is applied to the overall long-term program plans for the Division of Controlled Thermonuclear Research (DCTR) of the United States Energy Research and Development Administration (ERDA). As part of the PAF technique, the Graphical Evaluation and Review Technique (GERTS) IIIZ computer code is used to perform simulations on a logic network describing the DCTR long-term program plan. Logic networks describing the tokamak, mirror, and theta-pinch developments are simulated individually and then together to form an overall DCTR program network. The results of the simulation of the overall network using various funding schemes and strategies are presented. An economic sensitivity analysis is provided for the tokamak logic networks. An analysis is also performed of the fusion-fission hybrid concept in the context of the present DCTR goals. The results mentioned above as well as the PAF technique itself are evaluated, and recommendations for further research are discussed

  3. Testing of the Advanced Stirling Radioisotope Generator Engineering Unit at NASA Glenn Research Center

    Science.gov (United States)

    Lewandowski, Edward J.

    2013-01-01

    The Advanced Stirling Radioisotope Generator (ASRG) is a high-efficiency generator being developed for potential use on a Discovery 12 space mission. Lockheed Martin designed and fabricated the ASRG Engineering Unit (EU) under contract to the Department of Energy. This unit was delivered to NASA Glenn Research Center in 2008 and has been undergoing extended operation testing to generate long-term performance data for an integrated system. It has also been used for tests to characterize generator operation while varying control parameters and system inputs, both when controlled with an alternating current (AC) bus and with a digital controller. The ASRG EU currently has over 27,000 hours of operation. This paper summarizes all of the tests that have been conducted on the ASRG EU over the past 3 years and provides an overview of the test results and what was learned.

  4. Research ethics committees in the regulation of clinical research: comparison of Finland to England, Canada, and the United States.

    Science.gov (United States)

    Hemminki, Elina

    2016-01-19

    The aim of this paper is to compare common features and variation in the work of research ethics committees (RECs) in Finland to three other countries - England, Canada, the United States of America (USA) - in the late 2000s. Several approaches and data sources were used, including semi- or unstructured interviews of experts, documents, previous reports, presentations in meetings and observations. A theoretical framework was created and data from various sources synthesized. In Finland, RECs were regulated by a medical research law, whereas in the other countries many related laws and rules guided RECs; drug trials had specific additional rules. In England and the USA, there was a REC control body. In all countries, members were voluntary and included lay-persons, and payment arrangements varied. Patient protection was the main ethics criteria, but other criteria (research advancement, availability of results, payments, detailed fulfilment of legislation) varied. In all countries, RECs had been given administrative duties. Variations by country included the mandate, practical arrangements, handling of multi-site research, explicitness of proportionate handlings, judging scientific quality, time-limits for decisions, following of projects, role in institute protection, handling conflicts of interests, handling of projects without informed consent, and quality assurance research. The division of work between REC members and secretariats varied in checking of formalities. In England, quality assurance of REC work was thorough, fairly thorough in the USA, and not performed in Finland. The work of RECs in the four countries varied notably. Various deficiencies in the system require action, for which international comparison can provide useful insights.

  5. 75 FR 6089 - Processed Raspberry Promotion, Research, and Information Order; Referendum Procedures

    Science.gov (United States)

    2010-02-08

    ..., Advertising, Consumer information, Marketing agreements, Processed Raspberries, Promotion, Reporting and...-705-FR] RIN 0581-AC79 Processed Raspberry Promotion, Research, and Information Order; Referendum... referendum to determine whether the issuance of the proposed Processed Raspberry Promotion, Research, and...

  6. Process and unit for gasification of combustible material. Verfahren und Aggregat zur Vergasung brennbaren Gutes

    Energy Technology Data Exchange (ETDEWEB)

    Linneborn, J

    1987-05-21

    The invention refers to a process for the gasification of solid and combustible material in a moving bed and a unit in which this process can be carried out. By material to be gasified one means small material such as ground fossil coal and all organic substances such as wood, straw, husks and shells of fruit, to which sewage sludge can be added. The new process can be carried out, according to the invention, in a closed duct moved by vibration or shaking, in which the material or the ash produced moves from one end to the other by suitable vibration and comes into contact with round heat sources largely resistant to friction. This achieves rapid gasification of the material (at about 1000/sup 0/C) by convection and radiation.

  7. Security central processing unit applications in the protection of nuclear facilities

    International Nuclear Information System (INIS)

    Goetzke, R.E.

    1987-01-01

    New or upgraded electronic security systems protecting nuclear facilities or complexes will be heavily computer dependent. Proper planning for new systems and the employment of new state-of-the-art 32 bit processors in the processing of subsystem reports are key elements in effective security systems. The processing of subsystem reports represents only a small segment of system overhead. In selecting a security system to meet the current and future needs for nuclear security applications the central processing unit (CPU) applied in the system architecture is the critical element in system performance. New 32 bit technology eliminates the need for program overlays while providing system programmers with well documented program tools to develop effective systems to operate in all phases of nuclear security applications

  8. Future evolution of the Fast TracKer (FTK) processing unit

    CERN Document Server

    Gentsos, C; The ATLAS collaboration; Giannetti, P; Magalotti, D; Nikolaidis, S

    2014-01-01

    The Fast Tracker (FTK) processor [1] for the ATLAS experiment has a computing core made of 128 Processing Units that reconstruct tracks in the silicon detector in a ~100 μsec deep pipeline. The track parameter resolution provided by FTK enables the HLT trigger to identify efficiently and reconstruct significant samples of fermionic Higgs decays. Data processing speed is achieved with custom VLSI pattern recognition, linearized track fitting executed inside modern FPGAs, pipelining, and parallel processing. One large FPGA executes full resolution track fitting inside low resolution candidate tracks found by a set of 16 custom Asic devices, called Associative Memories (AM chips) [2]. The FTK dual structure, based on the cooperation of VLSI dedicated AM and programmable FPGAs, is maintained to achieve further technology performance, miniaturization and integration of the current state of the art prototypes. This allows to fully exploit new applications within and outside the High Energy Physics field. We plan t...

  9. Advanced spent fuel processing technologies for the United States GNEP programme

    International Nuclear Information System (INIS)

    Laidler, J.J.

    2007-01-01

    Spent fuel processing technologies for future advanced nuclear fuel cycles are being developed under the scope of the Global Nuclear Energy Partnership (GNEP). This effort seeks to make available for future deployment a fissile material recycling system that does not involve the separation of pure plutonium from spent fuel. In the nuclear system proposed by the United States under the GNEP initiative, light water reactor spent fuel is treated by means of a solvent extraction process that involves a group extraction of transuranic elements. The recovered transuranics are recycled as fuel material for advanced burner reactors, which can lead in the long term to fast reactors with conversion ratios greater than unity, helping to assure the sustainability of nuclear power systems. Both aqueous and pyrochemical methods are being considered for fast reactor spent fuel processing in the current US development programme. (author)

  10. Feasibility study and concepts for use of compact process units to treat Hanford tank wastes

    Energy Technology Data Exchange (ETDEWEB)

    Collins, E.D.; Bond, W.D.; Campbell, D.O.; Harrington, F.E.; Malkemus, D.W.; Peishel, F.L.; Yarbro, O.O.

    1994-06-01

    A team of experienced radiochemical design engineers and chemists was assembled at Oak Ridge National Laboratory (ORNL) at the request of the Underground Storage Tank Integrated Demonstration (USTID) Program to evaluate the feasibility and perform a conceptual study of options for the use of compact processing units (CPUs), located at the Hanford, Washington, waste tank sites, to accomplish extensive pretreatment of the tank wastes using the clean-option concept. The scope of the ORNL study included an evaluation of the constraints of the various chemical process operations that may be employed and the constraints of necessary supporting operations. The latter include equipment maintenance and replacement, process control methods, product and by-product storage, and waste disposal.

  11. Feasibility study and concepts for use of compact process units to treat Hanford tank wastes

    International Nuclear Information System (INIS)

    Collins, E.D.; Bond, W.D.; Campbell, D.O.; Harrington, F.E.; Malkemus, D.W.; Peishel, F.L.; Yarbro, O.O.

    1994-06-01

    A team of experienced radiochemical design engineers and chemists was assembled at Oak Ridge National Laboratory (ORNL) at the request of the Underground Storage Tank Integrated Demonstration (USTID) Program to evaluate the feasibility and perform a conceptual study of options for the use of compact processing units (CPUs), located at the Hanford, Washington, waste tank sites, to accomplish extensive pretreatment of the tank wastes using the clean-option concept. The scope of the ORNL study included an evaluation of the constraints of the various chemical process operations that may be employed and the constraints of necessary supporting operations. The latter include equipment maintenance and replacement, process control methods, product and by-product storage, and waste disposal

  12. Authentic research projects: Students' perspectives on the process, ownership, and benefits of doing research

    Science.gov (United States)

    Bernard, Warren

    2005-11-01

    experience with authentic research for pre-service teachers during the certification program. Future research may focus on the students' perspectives of ownership through the process of the authentic research and teachers' perspectives of the authentic research experience.

  13. [Variations in the diagnostic confirmation process between breast cancer mass screening units].

    Science.gov (United States)

    Natal, Carmen; Fernández-Somoano, Ana; Torá-Rocamora, Isabel; Tardón, Adonina; Castells, Xavier

    2016-01-01

    To analyse variations in the diagnostic confirmation process between screening units, variations in the outcome of each episode and the relationship between the use of the different diagnostic confirmation tests and the lesion detection rate. Observational study of variability of the standardised use of diagnostic and lesion detection tests in 34 breast cancer mass screening units participating in early-detection programmes in three Spanish regions from 2002-2011. The diagnostic test variation ratio in percentiles 25-75 ranged from 1.68 (further appointments) to 3.39 (fine-needle aspiration). The variation ratio in detection rates of benign lesions, ductal carcinoma in situ and invasive cancer were 2.79, 1.99 and 1.36, respectively. A positive relationship between rates of testing and detection rates was found with fine-needle aspiration-benign lesions (R(2): 0.53), fine-needle aspiration-invasive carcinoma (R(2): 0 28), core biopsy-benign lesions (R(2): 0.64), core biopsy-ductal carcinoma in situ (R(2): 0.61) and core biopsy-invasive carcinoma (R(2): 0.48). Variation in the use of invasive tests between the breast cancer screening units participating in early-detection programmes was found to be significantly higher than variations in lesion detection. Units which conducted more fine-needle aspiration tests had higher benign lesion detection rates, while units that conducted more core biopsies detected more benign lesions and cancer. Copyright © 2016 SESPAS. Published by Elsevier Espana. All rights reserved.

  14. JNC-JAERI united research report. A study on degradation of structural materials under irradiation environment in nuclear reactors

    International Nuclear Information System (INIS)

    Hoshiya, Taiji; Takaya, Shigeru; Nagae, Yuji; Aoto, Kazumi; Abe, Yasuhiro; Nakamura, Yasuo; Ueno, Fumiyoshi; Nemoto, Yoshiyuki; Miwa, Yukio; Tsukada, Takashi; Ohmi, Masao; Saito, Junichi; Shimizu, Michio

    2004-10-01

    Japan Nuclear Cycle Development Institute (JNC) and Japan Atomic Energy Research Institute (JAERI) have started a JNC-JAERI united research program cooperatively in fiscal year 2003, which has been aimed for efficient progress and synergistic effect on the research activities of both Institutes in order to lead the facing task of unification between JNC and JAERI. This study has been chosen one of the united research themes because it has been common objective for both Institutes in the research field of structural materials such as Fast Breeder Reactor and Light Water Reactors components. The purpose of the study is to clarify damage mechanism of structural materials under irradiation, and then to develop the methods for damage evaluation and detection in earlier stage of progressing process of damage along grain boundaries. In fiscal year 2003, magnetic flux density distribution (JNC) and micro-corrosion (JAERI) measurement apparatus were newly developed and equipped in Hot Facilities in two Institutes, respectively. The former apparatus, supersensitive Flux Gate sensor was installed, could detector leaked magnetic flux from material damaged by neutron irradiation. The latter one, Atomic Force Microscope was installed, could detect grain boundary corrosion loss after an electrochemical corrosion test of irradiated material. These apparatus were designed and produced in consideration of radiation resistance and remote-controlled operation to equip in hot cells. As the results of preliminary studies using Ni ion irradiated specimen, damage detection by corrosion property in grain boundary was possible but magnetic property change could not detect. We will start the study on neutron irradiation damage by employing the two apparatus as the next step. (author)

  15. Process engineering design of pathological waste incinerator with an integrated combustion gases treatment unit.

    Science.gov (United States)

    Shaaban, A F

    2007-06-25

    Management of medical wastes generated at different hospitals in Egypt is considered a highly serious problem. The sources and quantities of regulated medical wastes have been thoroughly surveyed and estimated (75t/day from governmental hospitals in Cairo). From the collected data it was concluded that the most appropriate incinerator capacity is 150kg/h. The objective of this work is to develop the process engineering design of an integrated unit, which is technically and economically capable for incinerating medical wastes and treatment of combustion gases. Such unit consists of (i) an incineration unit (INC-1) having an operating temperature of 1100 degrees C at 300% excess air, (ii) combustion-gases cooler (HE-1) generating 35m(3)/h hot water at 75 degrees C, (iii) dust filter (DF-1) capable of reducing particulates to 10-20mg/Nm(3), (iv) gas scrubbers (GS-1,2) for removing acidic gases, (v) a multi-tube fixed bed catalytic converter (CC-1) to maintain the level of dioxins and furans below 0.1ng/Nm(3), and (vi) an induced-draft suction fan system (SF-1) that can handle 6500Nm(3)/h at 250 degrees C. The residence time of combustion gases in the ignition, mixing and combustion chambers was found to be 2s, 0.25s and 0.75s, respectively. This will ensure both thorough homogenization of combustion gases and complete destruction of harmful constituents of the refuse. The adequate engineering design of individual process equipment results in competitive fixed and operating investments. The incineration unit has proved its high operating efficiency through the measurements of different pollutant-levels vented to the open atmosphere, which was found to be in conformity with the maximum allowable limits as specified in the law number 4/1994 issued by the Egyptian Environmental Affairs Agency (EEAA) and the European standards.

  16. Qualitative research within trials: developing a standard operating procedure for a clinical trials unit

    Science.gov (United States)

    2013-01-01

    Background Qualitative research methods are increasingly used within clinical trials to address broader research questions than can be addressed by quantitative methods alone. These methods enable health professionals, service users, and other stakeholders to contribute their views and experiences to evaluation of healthcare treatments, interventions, or policies, and influence the design of trials. Qualitative data often contribute information that is better able to reform policy or influence design. Methods Health services researchers, including trialists, clinicians, and qualitative researchers, worked collaboratively to develop a comprehensive portfolio of standard operating procedures (SOPs) for the West Wales Organisation for Rigorous Trials in Health (WWORTH), a clinical trials unit (CTU) at Swansea University, which has recently achieved registration with the UK Clinical Research Collaboration (UKCRC). Although the UKCRC requires a total of 25 SOPs from registered CTUs, WWORTH chose to add an additional qualitative-methods SOP (QM-SOP). Results The qualitative methods SOP (QM-SOP) defines good practice in designing and implementing qualitative components of trials, while allowing flexibility of approach and method. Its basic principles are that: qualitative researchers should be contributors from the start of trials with qualitative potential; the qualitative component should have clear aims; and the main study publication should report on the qualitative component. Conclusions We recommend that CTUs consider developing a QM-SOP to enhance the conduct of quantitative trials by adding qualitative data and analysis. We judge that this improves the value of quantitative trials, and contributes to the future development of multi-method trials. PMID:23433341

  17. National funding for mental health research in Finland, France, Spain and the United Kingdom.

    Science.gov (United States)

    Hazo, Jean-Baptiste; Gandré, Coralie; Leboyer, Marion; Obradors-Tarragó, Carla; Belli, Stefano; McDaid, David; Park, A-La; Maliandi, Maria Victoria; Wahlbeck, Kristian; Wykes, Til; van Os, Jim; Haro, Josep Maria; Chevreul, Karine

    2017-09-01

    As part of the Roamer project, we aimed at revealing the share of health research budgets dedicated to mental health, as well as on the amounts allocated to such research for four European countries. Finland, France, Spain and the United Kingdom national public and non-profit funding allocated to mental health research in 2011 were investigated using, when possible, bottom-up approaches. Specifics of the data collection varied from country to country. The total amount of public and private not for profit mental health research funding for Finland, France, Spain and the UK was €10·2, €84·8, €16·8, and €127·6 million, respectively. Charities accounted for a quarter of the funding in the UK and less than six per cent elsewhere. The share of health research dedicated to mental health ranged from 4·0% in the UK to 9·7% in Finland. When compared to the DALY attributable to mental disorders, Spain, France, Finland, and the UK invested respectively €12·5, €31·2, €39·5, and €48·7 per DALY. Among these European countries, there is an important gap between the level of mental health research funding and the economic and epidemiologic burden of mental disorders. Copyright © 2017 Elsevier B.V. and ECNP. All rights reserved.

  18. Progress of the United States foreign research reactor spent nuclear fuel acceptance program

    International Nuclear Information System (INIS)

    Huizenga, D.G.; Clapper, M.; Thrower, A.W.

    2002-01-01

    The United States Department of Energy (DOE), in consultation with the Department of State (DOS), adopted the Nuclear Weapons Nonproliferation Policy Concerning Foreign Research Reactor Spent Nuclear Fuel in May 1996. To date, the Foreign Research Reactor (FRR) Spent Nuclear Fuel (SNF) Acceptance Program has completed 23 shipments. Almost 5000 spent fuel assemblies from eligible research reactors throughout the world have been accepted into the United States under this program. Over the past year, another cross-country shipment of fuel was accomplished, as well as two additional shipments in the fourth quarter of calendar year 2001. These shipments attracted considerable safeguards oversight since they occurred post September 11. Recent guidance from the Nuclear Regulatory Commission (NRC) pertaining to security and safeguards issues deals directly with the transport of nuclear material. Since the Acceptance Program has consistently applied above regulatory safety enhancements in transport of spent nuclear fuel, this guidance did not adversely effect the Program. As the Program draws closer to its termination date, an increased number of requests for program extension are received. Currently, there are no plans to extend the policy beyond its current expiration date; therefore, eligible reactor operators interested in participating in this program are strongly encouraged to evaluate their inventory and plan for future shipments as soon as possible. (author)

  19. The unit cost factors and calculation methods for decommissioning - Cost estimation of nuclear research facilities

    International Nuclear Information System (INIS)

    Kwan-Seong Jeong; Dong-Gyu Lee; Chong-Hun Jung; Kune-Woo Lee

    2007-01-01

    Available in abstract form only. Full text of publication follows: The uncertainties of decommissioning costs increase high due to several conditions. Decommissioning cost estimation depends on the complexity of nuclear installations, its site-specific physical and radiological inventories. Therefore, the decommissioning costs of nuclear research facilities must be estimated in accordance with the detailed sub-tasks and resources by the tasks of decommissioning activities. By selecting the classified activities and resources, costs are calculated by the items and then the total costs of all decommissioning activities are reshuffled to match with its usage and objectives. And the decommissioning cost of nuclear research facilities is calculated by applying a unit cost factor method on which classification of decommissioning works fitted with the features and specifications of decommissioning objects and establishment of composition factors are based. Decommissioning costs of nuclear research facilities are composed of labor cost, equipment and materials cost. Of these three categorical costs, the calculation of labor costs are very important because decommissioning activities mainly depend on labor force. Labor costs in decommissioning activities are calculated on the basis of working time consumed in decommissioning objects and works. The working times are figured out of unit cost factors and work difficulty factors. Finally, labor costs are figured out by using these factors as parameters of calculation. The accuracy of decommissioning cost estimation results is much higher compared to the real decommissioning works. (authors)

  20. Summary of research on microbiological processes. International Energy Agency Subtask D, final report

    Energy Technology Data Exchange (ETDEWEB)

    Winters, A.L.

    1992-09-01

    Storage of thermal energy in aquifers has obvious benefits of saving energy and decreasing the consumption of fossil fuels. However, aquifer thermal energy storage (ATES), which involves groundwater aquifers as the storage medium for heat or chill, impinges on the environment. A literature review of pertinent microbiology publications (Hicks and Stewart, 1988) identified the potential for the interaction of ATES systems and microbiological processes to create a source of infectious diseases and the potential for damage to the environment. In addition, the review identified a potential for microbiological processes to develop conditions that would interfere with the operation of an ATES system. As a result of this research effort, investigators from Finland, Germany, Switzerland, and the United States have examined several ATES systems in operation and have observed that the ATES systems studied do not contribute to infectious disease transmission, do not adversely affect the environment, and do not contribute significantly to biofouling or biocorrosion.