WorldWideScience

Sample records for process incorporation strategy

  1. DWPF Flowsheet Studies with Simulants to Determine Modular Caustic Side Solvent Extraction Unit Solvent Partitioning and Verify Actinide Removal Process Incorporation Strategy

    International Nuclear Information System (INIS)

    Herman, C

    2006-01-01

    The Actinide Removal Process (ARP) facility and the Modular Caustic Side Solvent Extraction Unit (MCU) are scheduled to begin processing salt waste in fiscal year 2007. A portion of the streams generated in the salt processing facilities will be transferred to the Defense Waste Processing Facility (DWPF) to be incorporated in the glass matrix. Before the streams are introduced, a combination of impact analyses and research and development studies must be performed to quantify the impacts on DWPF processing. The Process Science and Engineering (PS and E) section of the Savannah River National Laboratory (SRNL) was requested via Technical Task Request (TTR) HLW/DWPF/TTR-2004-0031 to evaluate the impacts on DWPF processing. Simulant Chemical Process Cell (CPC) flowsheet studies have been performed using previous composition and projected volume estimates for the ARP sludge/monosodium titanate (MST) stream. Due to changes in the flammability control strategy for DWPF for salt processing, the incorporation strategy for ARP has changed and additional ARP flowsheet tests were necessary to validate the new processing strategy. The last round of ARP testing included the incorporation of the MCU stream and identified potential processing issues with the MCU solvent. The identified issues included the potential carry-over and accumulation of the MCU solvent components in the CPC condensers and in the recycle stream to the Tank Farm. Therefore, DWPF requested SRNL to perform additional MCU flowsheet studies to better quantify the organic distribution in the CPC vessels. The previous MCU testing used a Sludge Batch 4 (SB4) simulant since it was anticipated that both of these facilities would begin salt processing during SB4 processing. The same sludge simulant recipe was used in this round of ARP and MCU testing to minimize the number of changes between the two phases of testing so a better comparison could be made. ARP and MCU stream simulants were made for this phase of

  2. "Incorporating epigenetic data into the risk assessment process for the toxic metals arsenic, cadmium, chromium, lead, and mercury: strategies and challenges."

    Directory of Open Access Journals (Sweden)

    Paul eRay

    2014-07-01

    Full Text Available Exposure to toxic metals poses a serious human health hazard based on ubiquitous environmental presence, the extent of exposure, and the toxicity and disease states associated with exposure. This global health issue warrants accurate and reliable models derived from the risk assessment process to predict disease risk in populations. There has been considerable interest recently in the impact of environmental toxicants such as toxic metals on the epigenome. Epigenetic modifications are somatically inherited alterations to an individual’s genome without a change in the DNA sequence, and include, but are not limited to, three commonly studied alterations: DNA methylation, histone modification, and non-coding RNA expression. Given the role of epigenetic alterations in regulating gene and thus protein expression, there is the potential for the integration of toxic metal-induced epigenetic alterations as informative factors in the risk assessment process. In the present review, epigenetic alterations induced by five high priority toxic metals/metalloids are prioritized for analysis and their possible inclusion into the risk assessment process is discussed.

  3. Conceptualizing operations strategy processes

    DEFF Research Database (Denmark)

    Rytter, Niels Gorm; Boer, Harry; Koch, Christian

    2007-01-01

    Purpose - The purpose of this paper is to present insights into operations strategy (OS) in practice. It outlines a conceptualization and model of OS processes and, based on findings from an in-depth and longitudinal case study, contributes to further development of extant OS models and methods......; taking place in five dimensions of change - technical-rational, cultural, political, project management, and facilitation; and typically unfolding as a sequential and parallel, ordered and disordered, planned and emergent as well as top-down and bottom-up process. The proposed OS conceptualization...

  4. Phenomena based Methodology for Process Synthesis incorporating Process Intensification

    DEFF Research Database (Denmark)

    Lutze, Philip; Babi, Deenesh Kavi; Woodley, John

    2013-01-01

    at processes at the lowest level of aggregation which is the phenomena level. In this paper, a phenomena based synthesis/design methodology incorporating process intensification is presented. Using this methodology, a systematic identification of necessary and desirable (integrated) phenomena as well......Process intensification (PI) has the potential to improve existing as well as conceptual processes, in order to achieve a more sustainable production. PI can be achieved at different levels. That is, the unit operations, functional and/or phenomena level. The highest impact is expected by looking...... as generation and screening of phenomena based flowsheet options are presented using a decomposition based solution approach. The developed methodology as well as necessary tools and supporting methods are highlighted through a case study involving the production of isopropyl-acetate....

  5. Strategies for incorporation of polymer photovoltaics into garments and textiles

    DEFF Research Database (Denmark)

    Krebs, Frederik C; Biancardo, M.; Winther-Jensen, B.

    2006-01-01

    device as a structural element. The total area of the device on PET was typically much smaller than the active area due to the decorative design of the aluminium electrode. Elaborate integration of the photovoltaic device into the textile material involved the lamination of a polyethylene (PE) film onto......The incorporation of polymer photovoltaics into textiles was demonstrated following two different strategies. Simple incorporation of a polyethyleneterphthalate (PET) substrate carrying the polymer photovoltaic device prepared by a doctor blade technique necessitated the use of the photovoltaic...... a suitably transparent textile material that was used as substrate. Plasma treatment of the PE-surface allowed the application of a PEDOT electrode that exhibited good adherence. Screen printing of a designed pattern of poly 1,4(2-methoxy-5-(2-ethylhexyloxy))phenylenevinylene (MEH-PPV) from chlorobenzene...

  6. Incorporation of chemical kinetic models into process control

    International Nuclear Information System (INIS)

    Herget, C.J.; Frazer, J.W.

    1981-01-01

    An important consideration in chemical process control is to determine the precise rationing of reactant streams, particularly when a large time delay exists between the mixing of the reactants and the measurement of the product. In this paper, a method is described for incorporating chemical kinetic models into the control strategy in order to achieve optimum operating conditions. The system is first characterized by determining a reaction rate surface as a function of all input reactant concentrations over a feasible range. A nonlinear constrained optimization program is then used to determine the combination of reactants which produces the specified yield at minimum cost. This operating condition is then used to establish the nominal concentrations of the reactants. The actual operation is determined through a feedback control system employing a Smith predictor. The method is demonstrated on a laboratory bench scale enzyme reactor

  7. 77 FR 12284 - Access to Confidential Business Information; Protection Strategies Incorporated

    Science.gov (United States)

    2012-02-29

    ... Business Information; Protection Strategies Incorporated AGENCY: Environmental Protection Agency (EPA). ACTION: Notice. SUMMARY: EPA has authorized its contractor, Protection Strategies Incorporated (PSI) of... Business Information (CBI). DATES: Access to the confidential data occurred on or about February 16, 2012...

  8. The processes of strategy development

    OpenAIRE

    Bailey, Andy; Johnson, Gerry

    1995-01-01

    This paper is concerned with the processes by which strategy is developed within organisations. It builds on research into the nature of strategy development being undertaken within the Centre for Strategic Management and Organisational Change at Cranfield School of Management. Initially the process of strategy development is discussed, a number of explanations of the process are presented and an integrated framework is developed. This framework is subsequently used to illustra...

  9. Organizational strategy, structure, and process.

    Science.gov (United States)

    Miles, R E; Snow, C C; Meyer, A D; Coleman, H J

    1978-07-01

    Organizational adaptation is a topic that has received only limited and fragmented theoretical treatment. Any attempt to examine organizational adaptation is difficult, since the process is highly complex and changeable. The proposed theoretical framework deals with alternative ways in which organizations define their product-market domains (strategy) and construct mechanisms (structures and processes) to pursue these strategies. The framework is based on interpretation of existing literature and continuing studies in four industries (college textbook publishing, electronics, food processing, and health care).

  10. "Violent Intent Modeling: Incorporating Cultural Knowledge into the Analytical Process

    Energy Technology Data Exchange (ETDEWEB)

    Sanfilippo, Antonio P.; Nibbs, Faith G.

    2007-08-24

    While culture has a significant effect on the appropriate interpretation of textual data, the incorporation of cultural considerations into data transformations has not been systematic. Recognizing that the successful prevention of terrorist activities could hinge on the knowledge of the subcultures, Anthropologist and DHS intern Faith Nibbs has been addressing the need to incorporate cultural knowledge into the analytical process. In this Brown Bag she will present how cultural ideology is being used to understand how the rhetoric of group leaders influences the likelihood of their constituents to engage in violent or radicalized behavior, and how violent intent modeling can benefit from understanding that process.

  11. Incorporating business process management into RFID-enabled application systems

    NARCIS (Netherlands)

    Zhao, X.; Liu, C.; Lin, T.

    2010-01-01

    Purpose – The emergence of radio frequency identification (RFID) technology promises enormous opportunities to shift business process automation up to the wire level. The purpose of this paper is to explore the methodology of incorporating business logics into RFID edge systems, and thereby

  12. 76 FR 69722 - Access to Confidential Business Information by Protection Strategies Incorporated

    Science.gov (United States)

    2011-11-09

    ... Business Information by Protection Strategies Incorporated AGENCY: Environmental Protection Agency (EPA... Control Act (TSCA) confidential business information and to provide notice that this contract has been extended until December 31, 2011. Protection Strategies Incorporated (PSI) has been the owner of Eagle...

  13. Long range personalized cancer treatment strategies incorporating evolutionary dynamics.

    Science.gov (United States)

    Yeang, Chen-Hsiang; Beckman, Robert A

    2016-10-22

    Current cancer precision medicine strategies match therapies to static consensus molecular properties of an individual's cancer, thus determining the next therapeutic maneuver. These strategies typically maintain a constant treatment while the cancer is not worsening. However, cancers feature complicated sub-clonal structure and dynamic evolution. We have recently shown, in a comprehensive simulation of two non-cross resistant therapies across a broad parameter space representing realistic tumors, that substantial improvement in cure rates and median survival can be obtained utilizing dynamic precision medicine strategies. These dynamic strategies explicitly consider intratumoral heterogeneity and evolutionary dynamics, including predicted future drug resistance states, and reevaluate optimal therapy every 45 days. However, the optimization is performed in single 45 day steps ("single-step optimization"). Herein we evaluate analogous strategies that think multiple therapeutic maneuvers ahead, considering potential outcomes at 5 steps ahead ("multi-step optimization") or 40 steps ahead ("adaptive long term optimization (ALTO)") when recommending the optimal therapy in each 45 day block, in simulations involving both 2 and 3 non-cross resistant therapies. We also evaluate an ALTO approach for situations where simultaneous combination therapy is not feasible ("Adaptive long term optimization: serial monotherapy only (ALTO-SMO)"). Simulations utilize populations of 764,000 and 1,700,000 virtual patients for 2 and 3 drug cases, respectively. Each virtual patient represents a unique clinical presentation including sizes of major and minor tumor subclones, growth rates, evolution rates, and drug sensitivities. While multi-step optimization and ALTO provide no significant average survival benefit, cure rates are significantly increased by ALTO. Furthermore, in the subset of individual virtual patients demonstrating clinically significant difference in outcome between

  14. Optimisation of petroleum refinery water network systems retrofit incorporating reuse, regeneration and recycle strategies

    Energy Technology Data Exchange (ETDEWEB)

    Khor, Cheng Seong; Shah, Nilay [Imperial College London (United Kingdom); Mahadzir, Shuhaimi [Universiti Teknologi Petronas (Malaysia); Elkamel, Ali [University of Waterloo (Canada)

    2012-02-15

    Increasingly strict environmental regulations have given rise to higher requirements for operating efficiency and optimization and water has become a vital resource in the refining process and allied industries. Due to this high demand for water, plants may be exposed to supply interruptions and shortages in the future. Major concerns in the petroleum refining industry are the scarcity of fresh water supply and increasingly rigid rules on wastewater discharge, which have resulted from concerns over the environmental impact. This paper presents the efforts made to develop an optimization framework for design of petroleum refinery water network systems and retrofitting that incorporates reuse, regeneration, and recycling strategies. This framework includes the complementary advantage of water pinch analysis (WPA). Water minimization strategies were incorporated as first postulates in a superstructural representation that includes all feasible flow-sheet options for taking advantage of water reuse, regeneration and recycling opportunities. Additionally, a post-optimization analysis was carried out to evaluate the repeated treatment processes required to identify the most efficient retrofit option.

  15. Incorporating A Structured Writing Process into Existing CLS Curricula.

    Science.gov (United States)

    Honeycutt, Karen; Latshaw, Sandra

    2014-01-01

    Good communication and critical thinking are essential skills for all successful professionals, including Clinical Laboratory Science/Medical Laboratory Science (CLS/MLS) practitioners. Professional programs can incorporate writing assignments into their curricula to improve student written communication and critical thinking skills. Clearly defined, scenario-focused writing assignments provide student practice in clearly articulating responses to proposed problems or situations, researching and utilizing informational resources, and applying and synthesizing relevant information. Assessment rubrics, structured feedback, and revision writing methodologies help guide students through the writing process. This article describes how a CLS Program in a public academic medical center, located in the central United States (US) serving five centrally-located US states has incorporated writing intensive assignments into an existing 11-month academic year using formal, informal and reflective writing to improve student written communication and critical thinking skills. Faculty members and employers of graduates assert that incorporating writing intensive requirements have better prepared students for their professional role to effectively communicate and think critically.

  16. The process of adopting and incorporating simulation into undergraduate nursing curricula: a grounded theory study.

    Science.gov (United States)

    Taplay, Karyn; Jack, Susan M; Baxter, Pamela; Eva, Kevin; Martin, Lynn

    2015-01-01

    The aim of this study is to explain the process of adopting and incorporating simulation as a teaching strategy in undergraduate nursing programs, define uptake, and discuss potential outcomes. In many countries, simulation is increasingly adopted as a common teaching strategy. However, there is a dearth of knowledge related to the process of adoption and incorporation. We used an interpretive, constructivist approach to grounded theory to guide this research study. We conducted the study was in Ontario, Canada, during 2011-2012. Using multiple data sources, we informed the development of this theory including in-depth interviews (n = 43) and a review of key organizational documents, such as mission and vision statements (n = 67) from multiple nursing programs (n = 13). The adoption and uptake of mid- to high-fidelity simulation equipment is a multistep iterative process involving various organizational levels within the institution that entails a seven-phase process: (a) securing resources, (b) nursing leaders working in tandem, (c) getting it out of the box, (d) learning about simulation and its potential for teaching, (e) finding a fit, (f) trialing the equipment, and (g) integrating into the curriculum. These findings could assist nursing programs in Canada and internationally that wish to adopt or further incorporate simulation into their curricula and highlight potential organizational and program level outcomes. Crown Copyright © 2015. Published by Elsevier Inc. All rights reserved.

  17. Configuration Management Process Assessment Strategy

    Science.gov (United States)

    Henry, Thad

    2014-01-01

    Purpose: To propose a strategy for assessing the development and effectiveness of configuration management systems within Programs, Projects, and Design Activities performed by technical organizations and their supporting development contractors. Scope: Various entities CM Systems will be assessed dependent on Project Scope (DDT&E), Support Services and Acquisition Agreements. Approach: Model based structured against assessing organizations CM requirements including best practices maturity criteria. The model is tailored to the entity being assessed dependent on their CM system. The assessment approach provides objective feedback to Engineering and Project Management of the observed CM system maturity state versus the ideal state of the configuration management processes and outcomes(system). center dot Identifies strengths and risks versus audit gotcha's (findings/observations). center dot Used "recursively and iteratively" throughout program lifecycle at select points of need. (Typical assessments timing is Post PDR/Post CDR) center dot Ideal state criteria and maturity targets are reviewed with the assessed entity prior to an assessment (Tailoring) and is dependent on the assessed phase of the CM system. center dot Supports exit success criteria for Preliminary and Critical Design Reviews. center dot Gives a comprehensive CM system assessment which ultimately supports configuration verification activities.*

  18. Concrete Crack Identification Using a UAV Incorporating Hybrid Image Processing.

    Science.gov (United States)

    Kim, Hyunjun; Lee, Junhwa; Ahn, Eunjong; Cho, Soojin; Shin, Myoungsu; Sim, Sung-Han

    2017-09-07

    Crack assessment is an essential process in the maintenance of concrete structures. In general, concrete cracks are inspected by manual visual observation of the surface, which is intrinsically subjective as it depends on the experience of inspectors. Further, it is time-consuming, expensive, and often unsafe when inaccessible structural members are to be assessed. Unmanned aerial vehicle (UAV) technologies combined with digital image processing have recently been applied to crack assessment to overcome the drawbacks of manual visual inspection. However, identification of crack information in terms of width and length has not been fully explored in the UAV-based applications, because of the absence of distance measurement and tailored image processing. This paper presents a crack identification strategy that combines hybrid image processing with UAV technology. Equipped with a camera, an ultrasonic displacement sensor, and a WiFi module, the system provides the image of cracks and the associated working distance from a target structure on demand. The obtained information is subsequently processed by hybrid image binarization to estimate the crack width accurately while minimizing the loss of the crack length information. The proposed system has shown to successfully measure cracks thicker than 0.1 mm with the maximum length estimation error of 7.3%.

  19. Antibacterial and cytocompatible nanotextured Ti surface incorporating silver via single step hydrothermal processing

    Energy Technology Data Exchange (ETDEWEB)

    Mohandas, Anu; Krishnan, Amit G.; Biswas, Raja; Menon, Deepthy, E-mail: deepthymenon@aims.amrita.edu; Nair, Manitha B., E-mail: manithanair@aims.amrita.edu

    2017-06-01

    Nanosurface modification of Titanium (Ti) implants and prosthesis is proved to enhance osseointegration at the tissue–implant interface. However, many of these products lack adequate antibacterial capability, which leads to implant loosening. As a curative strategy, in this study, nanotextured Ti substrates embedded with silver nanoparticles were developed through a single step hydrothermal processing in an alkaline medium containing silver nitrate at different concentrations (15, 30 and 75 μM). Scanning electron micrographs revealed a non-periodically oriented nanoleafy structure on Ti (TNL) decorated with Ag nanoparticles (nanoAg), which was verified by XPS, XRD and EDS analysis. This TNLAg substrate proved to be mechanically stable upon nanoindentation and nanoscratch tests. Silver ions at detectable levels were released for a period of ~ 28 days only from substrates incorporating higher nanoAg content. The samples demonstrated antibacterial activity towards both Escherichia coli and Staphylococcus aureus, with a more favorable response to the former. Simultaneously, Ti substrates incorporating nanoAg at all concentrations supported the viability, proliferation and osteogenic differentiation of mesenchymal stem cells. Overall, nanoAg incorporation into surface modified Ti via a simple one-step thermochemical method is a favorable strategy for producing implants with dual characteristics of antibacterial activity and cell compatibility. - Highlights: • Nanosilver was incorporated within Ti nanoleafy topography by simple one-step thermochemical method • The nanosurface demonstrated antibacterial activity against gram positive and gram negative bacteria • The nanosurface promoted the viability, proliferation and osteogenic differentiation of mesenchymal stem cells.

  20. Corporate political strategy: incorporating the management of public policy issues into hospital strategy.

    Science.gov (United States)

    Bigelow, B; Arndt, M; Stone, M M

    1997-01-01

    Hospitals engage in a variety of strategies designed to anticipate, shape, and respond to public policy issues. This article describes corporate political strategy and argues for its need throughout a public policy issue's life cycle.

  1. Evolving local climate adaptation strategies: incorporating influences of socio–economic stress

    OpenAIRE

    Hjerpe, Mattias; Glaas, Erik

    2012-01-01

    Socio-economic and climatic stresses affect local communities’ vulnerability toflooding. Better incorporation of socio-economic stress in local vulnerability assessments isimportant when planning for climate adaptation. This is rarely done due to insufficientunderstanding of their interaction, in both theory and practice. The omission leads to criticalweaknesses in local adaptation strategies. This study analyses how socio-economic stressinteract with climatic stress and shape local vulnerabi...

  2. Tank Waste Remediation System optimized processing strategy

    International Nuclear Information System (INIS)

    Slaathaug, E.J.; Boldt, A.L.; Boomer, K.D.; Galbraith, J.D.; Leach, C.E.; Waldo, T.L.

    1996-03-01

    This report provides an alternative strategy evolved from the current Hanford Site Tank Waste Remediation System (TWRS) programmatic baseline for accomplishing the treatment and disposal of the Hanford Site tank wastes. This optimized processing strategy performs the major elements of the TWRS Program, but modifies the deployment of selected treatment technologies to reduce the program cost. The present program for development of waste retrieval, pretreatment, and vitrification technologies continues, but the optimized processing strategy reuses a single facility to accomplish the separations/low-activity waste (LAW) vitrification and the high-level waste (HLW) vitrification processes sequentially, thereby eliminating the need for a separate HLW vitrification facility

  3. Leadership Book Club: An Innovative Strategy to Incorporate Leadership Development Into Pharmacy Residency Programs.

    Science.gov (United States)

    Chappell, Alyssa; Dervay, Katelyn

    2016-09-01

    Purpose: To describe an innovative strategy for incorporating leadership training and development across multiple postgraduate year 2 (PGY2) pharmacy residency programs at a single institution. Background: Tampa General Hospital has 7 pharmacy residency positions: 4 postgraduate year 1 (PGY1) residents and a single resident for each of the 3 PGY2 programs (critical care, emergency medicine, and solid organ transplant). Administrative topics are incorporated across the PGY1 and PGY2 residency programs, with each PGY2 program having additional administrative topics specific to their specialty area. Summary: What began as an elective administrative topic discussion for the PGY2 emergency medicine resident has evolved over time into a longitudinal leadership book club. The leadership book club is utilized to meet the residency goals and objectives related to leadership development for all 3 PGY2 programs. Each year a single book is identified through the American Society of Health-System Pharmacists (ASHP) Leadership Academy book list or by participant suggestion. The book is then divided into 4 sections with corresponding hour-long discussions that occur quarterly throughout the residency year. The residency program directors (RPDs) and co-RPDs lead the initial discussion, and each PGY2 resident leads 1 of the subsequent 3 discussions. Based on resident feedback, the leadership book club is an innovative and effective strategy to incorporate leadership training and development into residency training. Conclusion: It is imperative to foster the development of leadership skills in pharmacy residency programs to prevent a future leadership gap in health system pharmacy. Leadership book club is a unique strategy to incorporate leadership training longitudinally across multiple PGY2 residency programs at a single institution.

  4. Strategies for Incorporating Women-Specific Sexuality Education into Addiction Treatment Models

    Science.gov (United States)

    James, Raven

    2007-01-01

    This paper advocates for the incorporation of a women-specific sexuality curriculum in the addiction treatment process to aid in sexual healing and provide for aftercare issues. Sexuality in addiction treatment modalities is often approached from a sex-negative stance, or that of sexual victimization. Sexual issues are viewed as addictive in and…

  5. Methods to incorporate different data types in the characterization process

    International Nuclear Information System (INIS)

    Gomez-Hernandez, J.J.; Carrera, J.; Medina, A.

    1998-01-01

    Spatial variability of the hydrodynamic parameters controlling radionuclide transport causes large uncertainties in the predictions. Methods have been devised to analyze spatial variability of these parameters and to model the uncertainty of the predictions. However, the final use given to large portions of the total data collected is minimal. Techniques have been developed and implemented with the aim of incorporating all types of data in the characterization of the spatial variability of conductivity/transmissivity. This serves to reduce the uncertainty in the predictions and to increase the confidence in the model. Types of data used in models include: geometric information, transmissivity data, piezometric data, geological/geophysical information tracer test concentration data, and isotopic data. (R.P.)

  6. STRATEGY FORMULATION PROCESS AND INNOVATION PERFORMANCE NEXUS

    Directory of Open Access Journals (Sweden)

    Chijioke Nwachukwu

    2018-03-01

    Full Text Available The purpose of this study is to examine the link between strategy formulation process and innovation performance indicators in microfinance banks in Nigeria (MFBs. 100 employees of leading microfinance banks were randomly selected for this study. 80 questionnaires were returned but only 76 were found usable for the analysis. Regression analysis technique was used in examining the nature of the relationships of the variables and for hypotheses testing. The authors used exploratory factor analysis and Cronbach's alpha to test for the validity and reliability of the questionnaires. The results show that strategy formulation process has a positive effect on process innovation performance, product innovation performance and marketing innovation performance. Thus, all the three hypotheses tested were supported. The authors, therefore, concludes that a systematic strategy formulation process is necessary for firms to achieve and sustain process innovation performance, product innovation performance and marketing innovation performance. This study proposed suggestion for further studies.

  7. Incorporating electronic-based and computer-based strategies: graduate nursing courses in administration.

    Science.gov (United States)

    Graveley, E; Fullerton, J T

    1998-04-01

    The use of electronic technology allows faculty to improve their course offerings. Four graduate courses in nursing administration were contemporized to incorporate fundamental computer-based skills that would be expected of graduates in the work setting. Principles of adult learning offered a philosophical foundation that guided course development and revision. Course delivery strategies included computer-assisted instructional modules, e-mail interactive discussion groups, and use of the electronic classroom. Classroom seminar discussions and two-way interactive video conferencing focused on group resolution of problems derived from employment settings and assigned readings. Using these electronic technologies, a variety of courses can be revised to accommodate the learners' needs.

  8. Strategy in Generative Planning of Turning Processes

    NARCIS (Netherlands)

    van Houten, Frederikus J.A.M.; Kals, H.J.J.

    1986-01-01

    This paper reports on the process and operations planning system ROUND and the strategies which underlie the decision making processes in the planning of turning operations. At first, an outline is given about the environment for which generative systems like ROUND are being developed. The

  9. Markov modulated Poisson process models incorporating covariates for rainfall intensity.

    Science.gov (United States)

    Thayakaran, R; Ramesh, N I

    2013-01-01

    Time series of rainfall bucket tip times at the Beaufort Park station, Bracknell, in the UK are modelled by a class of Markov modulated Poisson processes (MMPP) which may be thought of as a generalization of the Poisson process. Our main focus in this paper is to investigate the effects of including covariate information into the MMPP model framework on statistical properties. In particular, we look at three types of time-varying covariates namely temperature, sea level pressure, and relative humidity that are thought to be affecting the rainfall arrival process. Maximum likelihood estimation is used to obtain the parameter estimates, and likelihood ratio tests are employed in model comparison. Simulated data from the fitted model are used to make statistical inferences about the accumulated rainfall in the discrete time interval. Variability of the daily Poisson arrival rates is studied.

  10. Incorporation of Safety into Design Process : A Systems Engineering Perspective

    NARCIS (Netherlands)

    Rajabalinejad, M.

    2018-01-01

    This paper suggests integrating the best safety practices with the design process. This integration enriches the exploration experience for designers and adds extra values and competitor advantages for customers. The paper introduces the safety cube for combining common blocks for design, hazard

  11. Incorporating Human Factors into design change processes - a regulator's perspective

    International Nuclear Information System (INIS)

    Staples, L.; McRobbie, H.

    2003-01-01

    Nuclear power plants in Canada must receive written approval from the Canadian Nuclear Safety Commission (CNSC) when making certain changes that are defined in their licenses. The CNSC expects the design change process to include a method for ensuring that the human-machine interface and workplace design support the safe and reliable performance of required tasks. When reviewing design changes for approval, the CNSC looks for evidence of analysis work, use of appropriate human factors design guide-lines, and verification and validation testing of the design. In addition to reviewing significant design changes, evaluations are conducted to ensure design change processes adequately address human performance. Findings from reviews and evaluations highlight the need to integrate human factors into the design change process, provide human factors training and support to engineering staff, establish processes to ensure coordination between the various groups with a vested interest in human factors, and develop more rigorous methods to validate changes to maintenance, field operations and testing interfaces. (author)

  12. Strategies for accelerating the SLARette process

    International Nuclear Information System (INIS)

    Grewal, P.

    1997-01-01

    The SLARette (Spacer Location and Repositioning) process is continuing on several CANDU reactors, where loose fitting garter springs (spacers) were used, to prevent contact between the calandria tube and the pressure tube for the target life. With time, the sag in the fuel channel is increasing and consequently increasing the potential for contact between the pressure tube and the calandria tube. Also, due to increasing sag in the pressure tubes and increasing magnitude of the fuel channel constrictions on the eddy current detection system, the Spacer Location and Repositioning activities are becoming more time consuming and difficult. For CANDU owners, during the SLARette campaigns, station outage time is the most expensive item. Therefore, it is beneficial to complete the SLARette process as early as possible and as fast as possible. New SLARette strategies can substantially accelerate the overall SLARette process and thus minimize the outage time. There are several strategies to perform the SLARette process. These strategies include: using the SLARette Mark II Delivery System; using the SLARette Advanced Delivery System; implement creative fuel handling technique; operate from both sides of the reactor using Mark II Delivery Systems; operate both sides using Advanced Delivery Systems. Each strategy offers different benefits, rate of fuel channel processing (SLARette Activity), and schedule constraints. This paper provides the details of each strategy and compare them in terms of outage time, man-rem consumption, and constraints. (author)

  13. Strategies and applications for incorporating physical and chemical signal gradients in tissue engineering.

    Science.gov (United States)

    Singh, Milind; Berkland, Cory; Detamore, Michael S

    2008-12-01

    From embryonic development to wound repair, concentration gradients of bioactive signaling molecules guide tissue formation and regeneration. Moreover, gradients in cellular and extracellular architecture as well as in mechanical properties are readily apparent in native tissues. Perhaps tissue engineers can take a cue from nature in attempting to regenerate tissues by incorporating gradients into engineering design strategies. Indeed, gradient-based approaches are an emerging trend in tissue engineering, standing in contrast to traditional approaches of homogeneous delivery of cells and/or growth factors using isotropic scaffolds. Gradients in tissue engineering lie at the intersection of three major paradigms in the field-biomimetic, interfacial, and functional tissue engineering-by combining physical (via biomaterial design) and chemical (with growth/differentiation factors and cell adhesion molecules) signal delivery to achieve a continuous transition in both structure and function. This review consolidates several key methodologies to generate gradients, some of which have never been employed in a tissue engineering application, and discusses strategies for incorporating these methods into tissue engineering and implant design. A key finding of this review was that two-dimensional physicochemical gradient substrates, which serve as excellent high-throughput screening tools for optimizing desired biomaterial properties, can be enhanced in the future by transitioning from two dimensions to three dimensions, which would enable studies of cell-protein-biomaterial interactions in a more native tissue-like environment. In addition, biomimetic tissue regeneration via combined delivery of graded physical and chemical signals appears to be a promising strategy for the regeneration of heterogeneous tissues and tissue interfaces. In the future, in vivo applications will shed more light on the performance of gradient-based mechanical integrity and signal delivery

  14. Incorporation of a prolyl hydroxylase inhibitor into scaffolds: a strategy for stimulating vascularization.

    Science.gov (United States)

    Sham, Adeline; Martinez, Eliana C; Beyer, Sebastian; Trau, Dieter W; Raghunath, Michael

    2015-03-01

    Clinical applications of tissue engineering are constrained by the ability of the implanted construct to invoke vascularization in adequate extent and velocity. To overcome the current limitations presented by local delivery of single angiogenic factors, we explored the incorporation of prolyl hydroxylase inhibitors (PHIs) into scaffolds as an alternative vascularization strategy. PHIs are small molecule drugs that can stabilize the alpha subunit of hypoxia-inducible factor-1 (HIF-1), a key transcription factor that regulates a variety of angiogenic mechanisms. In this study, we conjugated the PHI pyridine-2,4-dicarboxylic acid (PDCA) through amide bonds to a gelatin sponge (Gelfoam(®)). Fibroblasts cultured on PDCA-Gelfoam were able to infiltrate and proliferate in these scaffolds while secreting significantly more vascular endothelial growth factor than cells grown on Gelfoam without PDCA. Reporter cells expressing green fluorescent protein-tagged HIF-1α exhibited dose-dependent stabilization of this angiogenic transcription factor when growing within PDCA-Gelfoam constructs. Subsequently, we implanted PDCA-Gelfoam scaffolds into the perirenal fat tissue of Sprague Dawley rats for 8 days. Immunostaining of explants revealed that the PDCA-Gelfoam scaffolds were amply infiltrated by cells and promoted vascular ingrowth in a dose-dependent manner. Thus, the incorporation of PHIs into scaffolds appears to be a feasible strategy for improving vascularization in regenerative medicine applications.

  15. Incorporating pushing in exclusion-process models of cell migration.

    Science.gov (United States)

    Yates, Christian A; Parker, Andrew; Baker, Ruth E

    2015-05-01

    The macroscale movement behavior of a wide range of isolated migrating cells has been well characterized experimentally. Recently, attention has turned to understanding the behavior of cells in crowded environments. In such scenarios it is possible for cells to interact, inducing neighboring cells to move in order to make room for their own movements or progeny. Although the behavior of interacting cells has been modeled extensively through volume-exclusion processes, few models, thus far, have explicitly accounted for the ability of cells to actively displace each other in order to create space for themselves. In this work we consider both on- and off-lattice volume-exclusion position-jump processes in which cells are explicitly allowed to induce movements in their near neighbors in order to create space for themselves to move or proliferate into. We refer to this behavior as pushing. From these simple individual-level representations we derive continuum partial differential equations for the average occupancy of the domain. We find that, for limited amounts of pushing, comparison between the averaged individual-level simulations and the population-level model is nearly as good as in the scenario without pushing. Interestingly, we find that, in the on-lattice case, the diffusion coefficient of the population-level model is increased by pushing, whereas, for the particular off-lattice model that we investigate, the diffusion coefficient is reduced. We conclude, therefore, that it is important to consider carefully the appropriate individual-level model to use when representing complex cell-cell interactions such as pushing.

  16. Resensi Buku: Organization Strategy, Structure, and Process

    Directory of Open Access Journals (Sweden)

    Ayi Ahadiyat

    2009-08-01

    Full Text Available Book ReviewJudul Buku    : Organization Strategy, Structure, and ProcessPenulis    : Raymond E. Miles and Charles C. SnowPenerbit     : McGraw-Hill Kogakusha, Ltd (International Student Edition, Tokyo,  274 hlm.Tahun    : 1978

  17. Career information processing strategies of secondary school ...

    African Journals Online (AJOL)

    This study examined the strategies commonly adopted by Osun state secondary school students in processing career information. It specifically examined the sources of career information available to the students, the uses to which the students put the information collected and how their career decision making skills can be ...

  18. Opening up the innovation process: archetypal strategies

    DEFF Research Database (Denmark)

    Vujovic, Sladjana; Ulhøi, John Parm

    2005-01-01

    sharing and co-operation play a critical part. The paper addresses the involvement of users in opening up the innovation process, which in turn gives the participating actors an interesting alternative for product development. We identify and classify four archetypal strategies for opening up...

  19. The Process of Marketing Segmentation Strategy Selection

    OpenAIRE

    Ionel Dumitru

    2007-01-01

    The process of marketing segmentation strategy selection represents the essence of strategical marketing. We present hereinafter the main forms of the marketing statategy segmentation: undifferentiated marketing, differentiated marketing, concentrated marketing and personalized marketing. In practice, the companies use a mix of these marketing segmentation methods in order to maximize the proffit and to satisfy the consumers’ needs.

  20. Optimal Scanning Bandwidth Strategy Incorporating Uncertainty about Adversary’s Characteristics

    Directory of Open Access Journals (Sweden)

    Andrey Garnaev

    2014-12-01

    Full Text Available In this paper, we investigate the problem of designing a spectrum scanning strategy to detect an intelligent Invader who wants to utilize spectrum undetected for his/her unapproved purposes. To deal with this problem we model the situation as two games, between a Scanner and an Invader, and solve them sequentially. The first game is formulated to design the optimal (in maxmin sense scanning algorithm, while the second one allows one to find the optimal values of the parameters for the algorithm depending on the parameters of the network. These games provide solutions for two dilemmas that the rivals face. The Invader’s dilemma consists of the following: the more bandwidth the Invader attempts to use leads to a larger payoff if he is not detected, but at the same time also increases the probability of being detected and thus fined. Similarly, the Scanner faces a dilemma: the wider the bandwidth scanned, the higher the probability of detecting the Invader, but at the expense of increasing the cost of building the scanning system. The equilibrium strategies are found explicitly and reveal interesting properties. In particular, we have found a discontinuous dependence of the equilibrium strategies on the network parameters, fine and the type of the Invader’s award. This discontinuity of the fine means that the network provider has to take into account a human/social factor since some threshold values of fine could be very sensible for the Invader, while in other situations simply increasing the fine has a minimal deterrence impact. Also we show how incomplete information about the Invader’s technical characteristics and reward (e.g. motivated by using different type of application, say, video-streaming or downloading files can be incorporated into the scanning strategy to increase its efficiency.

  1. Low Activity Waste Feed Process Control Strategy

    International Nuclear Information System (INIS)

    STAEHR, T.W.

    2000-01-01

    The primary purpose of this document is to describe the overall process control strategy for monitoring and controlling the functions associated with the Phase 1B high-level waste feed delivery. This document provides the basis for process monitoring and control functions and requirements needed throughput the double-shell tank system during Phase 1 high-level waste feed delivery. This document is intended to be used by (1) the developers of the future Process Control Plan and (2) the developers of the monitoring and control system

  2. Incorporating travel-time reliability into the congestion management process : a primer.

    Science.gov (United States)

    2015-02-01

    This primer explains the value of incorporating travel-time reliability into the Congestion Management Process (CMP) : and identifies the most current tools available to assist with this effort. It draws from applied research and best practices : fro...

  3. Novel strategies for control of fermentation processes

    DEFF Research Database (Denmark)

    Mears, Lisa

    to highly optimised industrial host strains. The focus of this project is instead on en-gineering of the process. The question to be answered in this thesis is, given a highly optimised industrial host strain, how can we operate the fermentation process in order to maximise the productivity of the system...... (2012). This model describes the fungal processes operated in the fermentation pilot plant at Novozymes A/S. This model is investigated using uncertainty analysis methods in order to as-sess the applicability to control applications. A mechanistic model approach is desirable, as it is a predictive....... This provides a prediction of the future trajectory of the process, so that it is possible to guide the system to the desired target mass. The control strategy is applied on-line at 550L scale in the Novozymes A/S fermentation pilot plant, and the method is challenged with four different sets of process...

  4. Incorporating the Use of Writing-to-Learn Strategy in Grade 10 Mathematics Lessons: The Students' Perspectives

    Science.gov (United States)

    Suhaimi, Zuhairina; Shahrill, Masitah; Tengah, Khairul Amilin; Abbas, Nor'Arifahwati Haji

    2016-01-01

    This study incorporated the use of writing-to-learn strategy, particularly journal writing, in Grade 10 mathematics lessons. Although part of a study conducted to investigate the effects of journal writing on academically lower-achieving learners with English as their second language, this paper will focus only on the students' perceptions of…

  5. Should mediastinoscopy actually be incorporated into the FDG PET strategy for patients with non-small cell lung carcinoma?

    International Nuclear Information System (INIS)

    Hayashi, Katsumi; Abe, Katsumi; Yano, Fuzuki; Watanabe, Sadahiro; Iwasaki, Yoshie; Kosuda, Shigeru

    2005-01-01

    Incorporating mediastinoscopy (MS) into the PET-based strategy for non-small cell lung carcinoma (NSCLC) patients might be cost-effective because MS can allow unnecessary thoracotomies to be avoided. The objective of our study was to assess the cost-effectiveness of incorporating MS into a PET strategy for NSCLC patients. To determine life expectancy (LE), quality adjusted life years (QALY), and the incremental cost-effectiveness ratio (ICER), a decision-tree sensitivity analysis was designed for histopathologically confirmed NSCLC patients with M0 disease, based on the three competing strategies of chest CT only vs. PET+CT vs. PET+CT+MS. A simulation of 1,000 NSCLC patients was created using baselines of other relevant variables in regard to sensitivity, specificity, mortality, LE, utilities and cost from published data. One-way sensitivity analyses were performed to determine the influences of mediastinal metastasis prevalence on LE, QALY and ICER. The LE and QALY per patient in the CT only strategy, PET+CT strategy and PET+CT+MS strategy were 4.79 and 4.35, 5.33 and 4.93 and 5.68 and 5.33 years, respectively, with a 20% prevalence of mediastinal metastasis. The ICERs were 906.6 yen x 10 3 (US$7,555)/QALY/patient at a 20% mediastinal metastasis prevalence, and 2,194 yen x 10 3 (US$18,282)/QALY/patient at a 50% prevalence, but exceeded 5,280 yen x 10 3 (US$44,000)/QALY/patient at 80%. Our study quantitatively showed the CT+PET+MS strategy in place of the PET+CT strategy in managing NSCLC patients to be cost-effective. MS should be incorporated into the PET+CT strategy for NSCLC patients except in those highly suspected of having mediastinal disease on chest CT or PET. (author)

  6. Incorporation of arsenic into gypsum: Relevant to arsenic removal and immobilization process in hydrometallurgical industry

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Danni; Yuan, Zidan [Key Laboratory of Pollution Ecology and Environmental Engineering, Institute of Applied Ecology, Chinese Academy of Sciences, Shenyang 110016 (China); Wang, Shaofeng, E-mail: wangshaofeng@iae.ac.cn [Key Laboratory of Pollution Ecology and Environmental Engineering, Institute of Applied Ecology, Chinese Academy of Sciences, Shenyang 110016 (China); Jia, Yongfeng, E-mail: yongfeng.jia@iae.ac.cn [Key Laboratory of Pollution Ecology and Environmental Engineering, Institute of Applied Ecology, Chinese Academy of Sciences, Shenyang 110016 (China); Demopoulos, George P. [Department of Mining and Materials Engineering, McGill University, Montreal, QC H3A 2B2 (Canada)

    2015-12-30

    Highlights: • Quantitatively studied the incorporation of arsenic into the structure of gypsum. • Arsenic content in the solid increased with pH and initial arsenic concentration. • Calcium arsenate phase precipitated in addition to gypsum at higher pH values. • The structure of gypsum and its morphology was altered by the incorporated arsenate. • The incorporated arsenate formed sainfeldite-like local structure in gypsum. - Abstract: Gypsum precipitates as a major secondary mineral during the iron-arsenate coprecipitation process for the removal of arsenic from hydrometallurgical effluents. However, its role in the fixation of arsenic is still unknown. This work investigated the incorporation of arsenic into gypsum quantitatively during the crystallization process at various pHs and the initial arsenic concentrations. X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), X-ray absorption near edge spectroscopy (XANES) and scanning electron microscopy (SEM) were employed to characterize the coprecipitated solids. The results showed that arsenate was measurably removed from solution during gypsum crystallization and the removal increased with increasing pH. At lower pH where the system was undersaturated with respect to calcium arsenate, arsenate ions were incorporated into gypsum structure, whereas at higher pH, calcium arsenate was formed and constituted the major arsenate bearing species in the precipitated solids. The findings may have important implications for arsenic speciation and stability of the hydrometallurgical solid wastes.

  7. Beyond the Rational: The Strategic Management Process, Cultural Change and Post-Incorporation Further Education.

    Science.gov (United States)

    Watson, George; Crossley, Michael

    2001-01-01

    Examines the introduction and evolution of the Strategic Management Process in England's further education sector. Critiques the transfer of business-sector management models to postsecondary education, reviews related policy literature, and summarizes a detailed longitudinal study of cultural change in one college embarking upon incorporation.…

  8. Chance and strategy in search processes

    International Nuclear Information System (INIS)

    Moreau, M; Bénichou, O; Loverdo, C; Voituriez, R

    2009-01-01

    We consider a searcher in quest of a target in two situations: in the presence of an infinite number of identical, Poisson distributed targets, and in the presence of a unique target in a finite territory. The searcher alternates intensive search phases, during which it scans the neighbouring territory but does not move, and displacement phases with no target detection. We study the problem of determining the best strategy of displacement for minimizing the mean search time: either a deterministic or a stochastic trajectory. With a reasonable simplifying hypothesis, we show that for Poisson distributed targets, deterministic, self-avoiding trajectories are more efficient than stochastic ones if the detection process involves no memory skills and can be modelled by a Markov process. In contrast, if the detection process is not Markovian, it can be better for the searcher to follow a stochastic trajectory rather than a self-avoiding trajectory, and we give an explicit example of such a memory law. In the case of a unique target, self-avoiding trajectories are always better if an infinite time is available for the search, whereas stochastic trajectories can be more efficient if the searcher has to find the target before a given deadline. Moreover, we show that the gain due to a deterministic trajectory, compared to a stochastic one, is not significant in the case of a large network containing a unique target. Additionally, for various examples of displacement trajectories, we compute the overall mean search time and study its minimization as a function of the mean duration of the detection process

  9. Understanding the Process of Envelope Glycoprotein Incorporation into Virions in Simian and Feline Immunodeficiency Viruses

    Directory of Open Access Journals (Sweden)

    José L. Affranchino

    2014-01-01

    Full Text Available The lentiviral envelope glycoproteins (Env mediate virus entry by interacting with specific receptors present at the cell surface, thereby determining viral tropism and pathogenesis. Therefore, Env incorporation into the virions formed by assembly of the viral Gag polyprotein at the plasma membrane of the infected cells is a key step in the replication cycle of lentiviruses. Besides being useful models of human immunodeficiency virus (HIV infections in humans and valuable tools for developing AIDS therapies and vaccines, simian and feline immunodeficiency viruses (SIV and FIV, respectively are relevant animal retroviruses; the study of which provides important information on how lentiviral replication strategies have evolved. In this review, we discuss the molecular mechanisms underlying the incorporation of the SIV and FIV Env glycoproteins into viral particles.

  10. Incorporating Metacognitive Strategy Training in ESP Writing Instruction: English for Lawyers

    Science.gov (United States)

    Rogers, Robert Johnson

    2010-01-01

    Despite the vast research on learning strategies and their application to receptive skills, relatively little has been written on the effect of learning strategies on productive skills, writing in particular, and even less has been written about the effect of metacognitive strategy training and how it might be implemented into the classroom. This…

  11. Incorporating Charging/Discharging Strategy of Electric Vehicles into Security-Constrained Optimal Power Flow to Support High Renewable Penetration

    Directory of Open Access Journals (Sweden)

    Kyungsung An

    2017-05-01

    Full Text Available This research aims to improve the operational efficiency and security of electric power systems at high renewable penetration by exploiting the envisioned controllability or flexibility of electric vehicles (EVs; EVs interact with the grid through grid-to-vehicle (G2V and vehicle-to-grid (V2G services to ensure reliable and cost-effective grid operation. This research provides a computational framework for this decision-making process. Charging and discharging strategies of EV aggregators are incorporated into a security-constrained optimal power flow (SCOPF problem such that overall energy cost is minimized and operation within acceptable reliability criteria is ensured. Particularly, this SCOPF problem has been formulated for Jeju Island in South Korea, in order to lower carbon emissions toward a zero-carbon island by, for example, integrating large-scale renewable energy and EVs. On top of conventional constraints on the generators and line flows, a unique constraint on the system inertia constant, interpreted as the minimum synchronous generation, is considered to ensure grid security at high renewable penetration. The available energy constraint of the participating EV associated with the state-of-charge (SOC of the battery and market price-responsive behavior of the EV aggregators are also explored. Case studies for the Jeju electric power system in 2030 under various operational scenarios demonstrate the effectiveness of the proposed method and improved operational flexibility via controllable EVs.

  12. Development of micronutrients rich homemade extruded food products with the incorporation of processed foxtail millet, wheat and chickpea

    Directory of Open Access Journals (Sweden)

    L Gautam

    2014-12-01

    Full Text Available Background: Food based approaches are recognized as an essential part of an urgently needed more comprehensive strategy for improving nutrition by increasing the availability and consumption to combat iron and other micronutrient deficiencies. Aims & Objective: The specific objective of the study was utilization of Foxtail millet (Setariaitalica along with other flour for production of micronutrients rich ready-to-eat snack products using homemade extrusion cooking. Material and methods: Methods Composite flour were prepared using processed Foxtail millet flour (FMF and other processed flours namely; wheat flour (WF, and chick pea flour (CPF. Nutritional properties of the blends were analyzed by using standard procedure. Two homemade extruded products namely; namkeensev, seviyan were prepared with four treatments T0, T1, T2, & T3. The commonly consumed recipes were developed by incorporating 50%, 75% and 100% of best result malted composite flour (FMF+CPF+WF. Results: The organoleptic qualities of these extruded samples were analyzed by panelists on a 9 point hedonic scale. The result indicate that the processed composite flour (FMF+CPF+WF based products were significantly accepted at the level of p<0.05 50% incorporation followed by 75% and 100% respectively. Conclusions: The present study conclude that, processed composite flour (Foxtail millet; wheat; chickpea in the ratios of (50:50 could be used to produce nutritive quality of homemade extrudates with acceptable sensory properties as they deliver vehicles for malnourished children.

  13. WE-AB-201-03: TPS Commissioning and QA: Incorporating the Entire Planning Process

    International Nuclear Information System (INIS)

    Mutic, S.

    2015-01-01

    defects in the future. Finally, the Gamma test has become a popular metric for reporting TPS Commissioning and QA results. It simplifies complex testing into a numerical index, but noisy data and casual application can make it misleading. A brief review of the issues around the use of the Gamma test will be presented. TPS commissioning and QA: A process orientation and application of control charts (Michael Sharpe) A framework for commissioning a treatment planning system will be presented, focusing on preparations, practical aspects of configuration, priorities, specifications, and establishing performance. The complexity of the modern TPS make modular testing of features inadequate, and modern QA tools can provide “too much information” about the performance of techniques like IMRT and VMAT. We have adopted a process orientation and quality tools, like control charts, for ongoing TPS QA and assessment of patient-specific tests. The trending nature of these tools reveals the overall performance of the TPS system, and quantifies the variations that arise from individual plans, discrete calculations, and experimentation based on discrete measurements. Examples demonstrating application of these tools to TPS QA will be presented. TPS commissioning and QA: Incorporating the entire planning process (Sasa Mutic) The TPS and its features do not perform in isolation. Instead, the features and modules are key components in a complex process that begins with CT Simulation and extends to treatment delivery, along with image guidance and verification. Most importantly, the TPS is used by people working in a multi-disciplinary environment. It is very difficult to predict the outcomes of human interactions with software. Therefore, an interdisciplinary approach to training, commissioning and QA will be presented, along with an approach to the physics chart check and end-to-end testing as a tool for TPS QA. The role of standardization and automation in QA will also be discussed

  14. WE-AB-201-03: TPS Commissioning and QA: Incorporating the Entire Planning Process

    Energy Technology Data Exchange (ETDEWEB)

    Mutic, S. [Washington University School of Medicine (United States)

    2015-06-15

    defects in the future. Finally, the Gamma test has become a popular metric for reporting TPS Commissioning and QA results. It simplifies complex testing into a numerical index, but noisy data and casual application can make it misleading. A brief review of the issues around the use of the Gamma test will be presented. TPS commissioning and QA: A process orientation and application of control charts (Michael Sharpe) A framework for commissioning a treatment planning system will be presented, focusing on preparations, practical aspects of configuration, priorities, specifications, and establishing performance. The complexity of the modern TPS make modular testing of features inadequate, and modern QA tools can provide “too much information” about the performance of techniques like IMRT and VMAT. We have adopted a process orientation and quality tools, like control charts, for ongoing TPS QA and assessment of patient-specific tests. The trending nature of these tools reveals the overall performance of the TPS system, and quantifies the variations that arise from individual plans, discrete calculations, and experimentation based on discrete measurements. Examples demonstrating application of these tools to TPS QA will be presented. TPS commissioning and QA: Incorporating the entire planning process (Sasa Mutic) The TPS and its features do not perform in isolation. Instead, the features and modules are key components in a complex process that begins with CT Simulation and extends to treatment delivery, along with image guidance and verification. Most importantly, the TPS is used by people working in a multi-disciplinary environment. It is very difficult to predict the outcomes of human interactions with software. Therefore, an interdisciplinary approach to training, commissioning and QA will be presented, along with an approach to the physics chart check and end-to-end testing as a tool for TPS QA. The role of standardization and automation in QA will also be discussed

  15. Incorporation of negative rules and evolution of a fuzzy controller for yeast fermentation process.

    Science.gov (United States)

    Birle, Stephan; Hussein, Mohamed Ahmed; Becker, Thomas

    2016-08-01

    The control of bioprocesses can be very challenging due to the fact that these kinds of processes are highly affected by various sources of uncertainty like the intrinsic behavior of the used microorganisms. Due to the reason that these kinds of process uncertainties are not directly measureable in most cases, the overall control is either done manually because of the experience of the operator or intelligent expert systems are applied, e.g., on the basis of fuzzy logic theory. In the latter case, however, the control concept is mainly represented by using merely positive rules, e.g., "If A then do B". As this is not straightforward with respect to the semantics of the human decision-making process that also includes negative experience in form of constraints or prohibitions, the incorporation of negative rules for process control based on fuzzy logic is emphasized. In this work, an approach of fuzzy logic control of the yeast propagation process based on a combination of positive and negative rules is presented. The process is guided along a reference trajectory for yeast cell concentration by alternating the process temperature. The incorporation of negative rules leads to a much more stable and accurate control of the process as the root mean squared error of reference trajectory and system response could be reduced by an average of 62.8 % compared to the controller using only positive rules.

  16. 75 FR 43557 - TA-W-73,682, Hartford Financial Services Group, Incorporated, Medical Bill Processing and...

    Science.gov (United States)

    2010-07-26

    ... Leased Workers From Beeline: Aurora, IL; TA-W-73,682A, Hartford Financial Services Group, Incorporated..., applicable to workers of Hartford Financial Services Group, Incorporated, Medical Bill Processing and Production Center Support, Aurora, Illinois and Hartford Financial Services Group, Incorporated, Medical Bill...

  17. Assessing the process and content of strategy in different organizations

    NARCIS (Netherlands)

    Romme, A.G.L.; Kunst, P.; Schreuder, H.; Spangenberg, J.

    1990-01-01

    This paper deals with a quantitative assessment of strategy content and strategy process characteristics. The framework used is based on the concept of strategic logics. The empirical study involves six organizations in The Netherlands. Both the content and the process dimension of strategy-making

  18. Incorporating an Authentic Learning Strategy into Undergraduate Apparel and Merchandising Curriculum

    Science.gov (United States)

    Ma, Yoon Jin; Lee, Hyun-Hwa

    2012-01-01

    An authentic learning strategy fostering students' active learning was studied using the scenario of a real-world project. Students from two different classes at two different universities worked as clients or consultants to develop an apparel sourcing strategy. Quantitative and qualitative data were gathered from 44 undergraduates enrolled in…

  19. Achieving National Security Strategy: An Effective Process?

    National Research Council Canada - National Science Library

    Mullery, Brian W

    2008-01-01

    The purpose of this research paper is two-fold: 1) to examine whether the U.S. government is properly organized and equipped at the Executive level, to achieve the goals of the President's National Security Strategy and 2...

  20. Marketing strategies in the internationalization process of Brazilian franchises

    OpenAIRE

    Camargo, Maria Adriana de A. P.; Rocha, Thelma Valéria; Silva, Susana Costa e

    2016-01-01

    Purpose – This paper aimed to analyze the influence of marketing strategies on the internationalization process of Brazilian franchises. The objective was to identify the marketing strategies used by Brazilian franchises during different stages of their internationalization processes and to analyze these strategies according to the Global Marketing Strategy (GMS). Design/methodology/approach – The paper adopted a qualitative research methodology based on three case studie...

  1. Impact of VSC Control Strategies and Incorporation of Synchronous Condensers on Distance Protection under Unbalanced Faults

    DEFF Research Database (Denmark)

    Jia, Jundi; Yang, Guangya; Nielsen, Arne Hejde

    2018-01-01

    on distance protection are evaluated using a commercial relay through hardware-in-the-loop (HIL) tests. Based on the test results, we propose to avoid using constant reactive power control strategy. It poses an adverse impact on the reliability and speed of distance protection regardless of the presence of SC....... This might bring up challenges to the protection system of a converter-dominated power system. This paper derives a generic converter peak current limitation method for three different VSC control strategies. The impact of the control strategies and the combined impact of a VSC with a synchronous condenser...... at the point of common coupling (PCC), while constant active power and balanced current control strategies favor the performances of distance protection....

  2. Modeling fraud detection and the incorporation of forensic specialists in the audit process

    DEFF Research Database (Denmark)

    Sakalauskaite, Dominyka

    Financial statement audits are still comparatively poor in fraud detection. Forensic specialists can play a significant role in increasing audit quality. In this paper, based on prior academic research, I develop a model of fraud detection and the incorporation of forensic specialists in the audit...... process. The intention of the model is to identify the reasons why the audit is weak in fraud detection and to provide the analytical framework to assess whether the incorporation of forensic specialists can help to improve it. The results show that such specialists can potentially improve the fraud...... detection in the audit, but might also cause some negative implications. Overall, even though fraud detection is one of the main topics in research there are very few studies done on the subject of how auditors co-operate with forensic specialists. Thus, the paper concludes with suggestions for further...

  3. Incorporating organ movements in IMRT treatment planning for prostate cancer: Minimizing uncertainties in the inverse planning process

    International Nuclear Information System (INIS)

    Unkelbach, Jan; Oelfke, Uwe

    2005-01-01

    We investigate an off-line strategy to incorporate inter fraction organ movements in IMRT treatment planning. Nowadays, imaging modalities located in the treatment room allow for several CT scans of a patient during the course of treatment. These multiple CT scans can be used to estimate a probability distribution of possible patient geometries. This probability distribution can subsequently be used to calculate the expectation value of the delivered dose distribution. In order to incorporate organ movements into the treatment planning process, it was suggested that inverse planning could be based on that probability distribution of patient geometries instead of a single snapshot. However, it was shown that a straightforward optimization of the expectation value of the dose may be insufficient since the expected dose distribution is related to several uncertainties: first, this probability distribution has to be estimated from only a few images. And second, the distribution is only sparsely sampled over the treatment course due to a finite number of fractions. In order to obtain a robust treatment plan these uncertainties should be considered and minimized in the inverse planning process. In the current paper, we calculate a 3D variance distribution in addition to the expectation value of the dose distribution which are simultaniously optimized. The variance is used as a surrogate to quantify the associated risks of a treatment plan. The feasibility of this approach is demonstrated for clinical data of prostate patients. Different scenarios of dose expectation values and corresponding variances are discussed

  4. Problems in the strategy implementation process in croatian companies

    Directory of Open Access Journals (Sweden)

    Tomislav Radoš

    2011-07-01

    Full Text Available This paper provides an analysis of the problems in the strategy implementation process in Croatian companies based on the research conducted in Croatian companies in the years 2004, 2005 and 2006. Research results show that problems in the strategy implementation process occur with equal intensity, regardless of the company’s characteristics (size, age and life cycle of the industry. The key problems in the implementation process are: poor communication (information exchange between employees and organizational units responsible for the strategy implementation process, non-adjustment of organizational structure to suit the defined strategy, lack of clear definition of key tasks and activities of all participants in the implementation process, inadequate information system of control over the process of strategy implementation, lack of clearly defined operational plans and directions for strategy implementation, and lack of clearly defined responsibilities and authorities of key employees.

  5. A hybrid twin screw extrusion/electrospinning method to process nanoparticle-incorporated electrospun nanofibres

    International Nuclear Information System (INIS)

    Erisken, Cevat; Kalyon, Dilhan M; Wang Hongjun

    2008-01-01

    A new hybrid methodology that fully integrates the processing capabilities of the twin screw extrusion process (conveying solids, melting, dispersive and distributive mixing, pressurization, temperature profiling, devolatilization) with electrospinning is described. The hybrid process is especially suited to the dispersion of nanoparticles into polymeric binders and the generation of nanoparticle-incorporated fibres and nanofibres. The new technology base is demonstrated with the dispersion of β-tricalcium phosphate (β-TCP) nanoparticles into poly(ε-caprolactone) (PCL) to generate biodegradable non-woven meshes that can be targeted as scaffolds for tissue engineering applications. The new hybrid method yielded fibre diameters in the range of 200-2000 nm for both PCL and β-TCP/PCL (35% by weight) composite scaffolds. The degree of crystallinity of polycaprolactone meshes could be manipulated in the 35.1-41% range, using the voltage strength as a parameter. The electrospinning process, integrated with dispersive kneading disc elements, facilitated the decrease of the cluster sizes and allowed the continuous compounding of the nanoparticles into the biodegradable polymer prior to electrospinning. Thermogravimetric analysis (TGA) of the non-woven meshes validated the continuous incorporation of 35 ± 1.5% (by weight) β-TCP nanoparticles for a targeted concentration of 35%. Uniaxial tensile testing of the meshes with and without the nanoparticles indicated that the ultimate tensile strength at break of the meshes increased from 0.47 ± 0.04 to 0.79 ± 0.08 MPa upon the incorporation of the β-TCP nanoparticles. This demonstration study suggests that the new technology base is particularly suitable for the concomitant dispersion and electrospinning of nanoparticles in the generation of myriad types of functional nanofibres

  6. Energy-neutral sustainable nutrient recovery incorporated with the wastewater purification process in an enlarged microbial nutrient recovery cell

    Science.gov (United States)

    Sun, Dongya; Gao, Yifan; Hou, Dianxun; Zuo, Kuichang; Chen, Xi; Liang, Peng; Zhang, Xiaoyuan; Ren, Zhiyong Jason; Huang, Xia

    2018-04-01

    Recovery of nutrient resources from the wastewater is now an inevitable strategy to maintain the supply of both nutrient and water for our huge population. While the intensive energy consumption in conventional nutrient recovery technologies still remained as the bottleneck towards the sustainable nutrient recycle. This study proposed an enlarged microbial nutrient recovery cell (EMNRC) which was powered by the energy contained in wastewater and achieved multi-cycle nutrient recovery incorporated with in situ wastewater treatment. With the optimal recovery solution of 3 g/L NaCl and the optimal volume ratio of wastewater to recovery solution of 10:1, >89% of phosphorus and >62% of ammonium nitrogen were recovered into struvite. An extremely low water input ratio of water. It was proved the EMNRC system was a promising technology which could utilize the chemical energy contained in wastewater itself and energy-neutrally recover nutrient during the continuous wastewater purification process.

  7. The Strategy Blueprint: A Strategy Process Computer-Aided Design Tool

    OpenAIRE

    Aldea, Adina Ioana; Febriani, Tania Rizki; Daneva, Maya; Iacob, Maria Eugenia

    2017-01-01

    Strategy has always been a main concern of organizations because it dictates their direction, and therefore determines their success. Thus, organizations need to have adequate support to guide them through their strategy formulation process. The goal of this research is to develop a computer-based tool, known as ‘the Strategy Blueprint’, consisting of a combination of nine strategy techniques, which can help organizations define the most suitable strategy, based on the internal and external f...

  8. Mobile Monitoring Data Processing and Analysis Strategies

    Science.gov (United States)

    The development of portable, high-time resolution instruments for measuring the concentrations of a variety of air pollutants has made it possible to collect data while in motion. This strategy, known as mobile monitoring, involves mounting air sensors on variety of different pla...

  9. Mobile Monitoring Data Processing & Analysis Strategies

    Science.gov (United States)

    The development of portable, high-time resolution instruments for measuring the concentrations of a variety of air pollutants has made it possible to collect data while in motion. This strategy, known as mobile monitoring, involves mounting air sensors on variety of different pla...

  10. Incorporating Early Learning Strategies in the School Improvement Grants (SIG) Program

    Science.gov (United States)

    Connors-Tadros, Lori; Dunn, Lenay; Martella, Jana; McCauley, Carlas

    2015-01-01

    The Center on Enhancing Early Learning Outcomes (CEELO) and the Center on School Turnaround (CST) collaborated to develop case studies of three selected schools receiving SIG funds that have, with the support of their districts, promoted the use of early childhood programming (PK-3) as a key strategy in their schools' turnaround models. The goal…

  11. Development of micronutrients rich homemade extruded food products with the incorporation of processed foxtail millet, wheat and chickpea

    Directory of Open Access Journals (Sweden)

    L Gautam

    2014-12-01

    Full Text Available Background: Food based approaches are recognized as an essential part of an urgently needed more comprehensive strategy for improving nutrition by increasing the availability and consumption to combat iron and other micronutrient deficiencies. Aims & Objective: The specific objective of the study was utilization of Foxtail millet (Setariaitalica along with other flour for production of micronutrients rich ready-to-eat snack products using homemade extrusion cooking. Material and methods: Methods Composite flour were prepared using processed Foxtail millet flour (FMF and other processed flours namely; wheat flour (WF, and chick pea flour (CPF. Nutritional properties of the blends were analyzed by using standard procedure. Two homemade extruded products namely; namkeensev, seviyan were prepared with four treatments T0, T1, T2, & T3. The commonly consumed recipes were developed by incorporating 50%, 75% and 100% of best result malted composite flour (FMF+CPF+WF. Results: The organoleptic qualities of these extruded samples were analyzed by panelists on a 9 point hedonic scale. The result indicate that the processed composite flour (FMF+CPF+WF based products were significantly accepted at the level of p<0.05 50% incorporation followed by 75% and 100% respectively. Conclusions: The present study conclude that, processed composite flour (Foxtail millet; wheat; chickpea in the ratios of (50:50 could be used to produce nutritive quality of homemade extrudates with acceptable sensory properties as they deliver vehicles for malnourished children.

  12. Women’s Work: Incorporating Females into the United States Military Strategy to Contain and Degrade Boko Haram

    Science.gov (United States)

    2017-06-09

    Wars.” The Washington Post, May 19. Accessed March 5, 2017. https://www.washingtonpost.com/posteverything/wp/2015/ 05/19/the- armys-all- women ...shift in Boko Haram’s tactics is the incorporation and use of women in their organization to help perpetuate terrorist acts. What is the U.S.’ s current...their organization to help perpetuate terrorist acts. What is the U.S.’ s current military strategy to counter Boko Haram? What role do women have in

  13. Incorporating a total cost perspective intothe purchasing strategy : A case study of amedium sized retail compan

    OpenAIRE

    EKSTRÖM, MARCUS; FAHNEHJELM, CAROLINA

    2016-01-01

    The retail industry is today characterized by downward price pressure, and the increasedcompetition in the industry has led to pressure on profit margins. Purchasing and supply chainmanagement have become areas of increased strategic importance and play a crucial role inthe business performance. This study aims to extend previous literature in these fields byproviding the existing research with an empirical study on how the purchasing strategy canincorporate a total cost perspective of the su...

  14. Characterization of natural organic matter treated by iron oxide nanoparticle incorporated ceramic membrane-ozonation process.

    Science.gov (United States)

    Park, Hosik; Kim, Yohan; An, Byungryul; Choi, Heechul

    2012-11-15

    In this study, changes in the physical and structural properties of natural organic matter (NOM) were observed during hybrid ceramic membrane processes that combined ozonation with ultrafiltration ceramic membrane (CM) or with a reactive ceramic membrane (RM), namely, an iron oxide nanoparticles (IONs) incorporated-CM. NOM from feed water and NOM from permeate treated with hybrid ceramic membrane processes were analyzed by employing several NOM characterization techniques. Specific ultraviolet absorbance (SUVA), high-performance size exclusion chromatography (HPSEC) and fractionation analyses showed that the hybrid ceramic membrane process effectively removed and transformed relatively high contents of aromatic, high molecular weight and hydrophobic NOM fractions. Fourier transform infrared spectroscopy (FTIR) and 3-dimensional excitation-emission matrix (EEM) fluorescence spectroscopy revealed that this process caused a significant decrease of the aromaticity of humic-like structures and an increase in electron withdrawing groups. The highest removal efficiency (46%) of hydroxyl radical probe compound (i.e., para-Chlorobenzoic acid (pCBA)) in RM-ozonation process compared with that in CM without ozonation process (8%) revealed the hydroxyl radical formation by the surface-catalyzed reaction between ozone and IONs on the surface of RM. In addition, experimental results on flux decline showed that fouling of RM-ozonation process (15%) was reduced compared with that of CM without ozonation process (30%). These results indicated that the RM-ozonation process enhanced the destruction of NOM and reduced the fouling by generating hydroxyl radicals from the catalytic ozonation in the RM-ozonation process. Copyright © 2012 Elsevier Ltd. All rights reserved.

  15. Incorporating healthcare informatics into the strategic planning process in nursing education.

    Science.gov (United States)

    Sackett, Kay; Jones, Janice; Erdley, W Scott

    2005-01-01

    The purpose of this article is to describe the incorporation of healthcare informatics into the strategic planning process in nursing education. An exemplar from the University at Buffalo, the State University of New York School of Nursing, is interwoven throughout the article. The challenges and successes inherent in a paradigm shift embracing the multifaceted adoption of technology in higher education are illustrated. The paradigm shift that necessitated this change, the need for informatics standards and competencies identified by regulatory agencies and the relationship of the triad mission of the Academy which includes research, teaching and service are then elucidated. Information pertinent to the strategic planning process is described including the use of a strengths, weaknesses, opportunities and threats (SWOT) analysis to facilitate the integration of a healthcare informatics model into a nursing curriculum.

  16. Novel strategies for control of fermentation processes

    DEFF Research Database (Denmark)

    Mears, Lisa; Stocks, Stuart; Sin, Gürkan

    Bioprocesses are inherently sensitive to fluctuations in processing conditions and must be tightly regulated to maintain cellular productivity. Industrial fermentations are often difficult to replicate across production sites or between facilities as the small operating differences in the equipment...... of a fermentation. Industrial fermentation processes are typically operated in fed batch mode, which also poses specific challenges for process monitoring and control. This is due to many reasons including non-linear behaviour, and a relatively poor understanding of the system dynamics. It is therefore challenging...

  17. Evaluation of control strategies in forming processes

    Directory of Open Access Journals (Sweden)

    Calmano Stefan

    2015-01-01

    Full Text Available Products of forming processes are subject to quality fluctuations due to uncertainty in semi-finished part properties as well as process conditions and environment. An approach to cope with these uncertainties is the implementation of a closed-loop control taking into account the actual product properties measured by sensors or estimated by a mathematical process model. Both methods of uncertainty control trade off with a financial effort. In case of sensor integration the effort is the cost of the sensor including signal processing as well as the design and manufacturing effort for integration. In case of an estimation model the effort is mainly determined by the time and knowledge needed to derive the model, identify the parameters and implement the model into the PLC. The risk of mismatch between model and reality as well as the risk of wrong parameter identification can be assumed as additional uncertainty (model uncertainty. This paper evaluates controlled and additional uncertainty by taking into account process boundary conditions like the degree of fluctuations in semi-finished part properties. The proposed evaluation is demonstrated by the analysis of exemplary processes.

  18. Effectiveness of strategies incorporating training and support of traditional birth attendants on perinatal and maternal mortality: meta-analysis.

    Science.gov (United States)

    Wilson, Amie; Gallos, Ioannis D; Plana, Nieves; Lissauer, David; Khan, Khalid S; Zamora, Javier; MacArthur, Christine; Coomarasamy, Arri

    2011-12-01

    To assess the effectiveness of strategies incorporating training and support of traditional birth attendants on the outcomes of perinatal, neonatal, and maternal death in developing countries. Systematic review with meta-analysis. Medline, Embase, the Allied and Complementary Medicine database, British Nursing Index, Cochrane Library, Cumulative Index to Nursing and Allied Health Literature, BioMed Central, PsycINFO, Latin American and Caribbean Health Sciences Literature database, African Index Medicus, Web of Science, Reproductive Health Library, and Science Citation Index (from inception to April 2011), without language restrictions. Search terms were "birth attend*", "traditional midwife", "lay birth attendant", "dais", and "comadronas". Review methods We selected randomised and non-randomised controlled studies with outcomes of perinatal, neonatal, and maternal mortality. Two independent reviewers undertook data extraction. We pooled relative risks separately for the randomised and non-randomised controlled studies, using a random effects model. We identified six cluster randomised controlled trials (n=138 549) and seven non-randomised controlled studies (n=72 225) that investigated strategies incorporating training and support of traditional birth attendants. All six randomised controlled trials found a reduction in adverse perinatal outcomes; our meta-analysis showed significant reductions in perinatal death (relative risk 0.76, 95% confidence interval 0.64 to 0.88, Ptraditional birth attendants.

  19. Reasoning strategies modulate gender differences in emotion processing.

    Science.gov (United States)

    Markovits, Henry; Trémolière, Bastien; Blanchette, Isabelle

    2018-01-01

    The dual strategy model of reasoning has proposed that people's reasoning can be understood asa combination of two different ways of processing information related to problem premises: a counterexample strategy that examines information for explicit potential counterexamples and a statistical strategy that uses associative access to generate a likelihood estimate of putative conclusions. Previous studies have examined this model in the context of basic conditional reasoning tasks. However, the information processing distinction that underlies the dual strategy model can be seen asa basic description of differences in reasoning (similar to that described by many general dual process models of reasoning). In two studies, we examine how these differences in reasoning strategy may relate to processing very different information, specifically we focus on previously observed gender differences in processing negative emotions. Study 1 examined the intensity of emotional reactions to a film clip inducing primarily negative emotions. Study 2 examined the speed at which participants determine the emotional valence of sequences of negative images. In both studies, no gender differences were observed among participants using a counterexample strategy. Among participants using a statistical strategy, females produce significantly stronger emotional reactions than males (in Study 1) and were faster to recognize the valence of negative images than were males (in Study 2). Results show that the processing distinction underlying the dual strategy model of reasoning generalizes to the processing of emotions. Copyright © 2017 Elsevier B.V. All rights reserved.

  20. Classroom Activities: Simple Strategies to Incorporate Student-Centered Activities within Undergraduate Science Lectures.

    Science.gov (United States)

    Lom, Barbara

    2012-01-01

    The traditional science lecture, where an instructor delivers a carefully crafted monolog to a large audience of students who passively receive the information, has been a popular mode of instruction for centuries. Recent evidence on the science of teaching and learning indicates that learner-centered, active teaching strategies can be more effective learning tools than traditional lectures. Yet most colleges and universities retain lectures as their central instructional method. This article highlights several simple collaborative teaching techniques that can be readily deployed within traditional lecture frameworks to promote active learning. Specifically, this article briefly introduces the techniques of: reader's theatre, think-pair-share, roundtable, jigsaw, in-class quizzes, and minute papers. Each technique is broadly applicable well beyond neuroscience courses and easily modifiable to serve an instructor's specific pedagogical goals. The benefits of each technique are described along with specific examples of how each technique might be deployed within a traditional lecture to create more active learning experiences.

  1. Incorporating Role of Stakeholders into Corporate CSR Strategy For Sustainable Growth: An Exploratory Study

    Directory of Open Access Journals (Sweden)

    Tanggamani Vani

    2017-01-01

    Full Text Available In today’s modern day context, Corporate Social Responsibility (CSR become the mantra for businesses as it can be seen as a strategic approach for firms to be succeed in their business endeavours. Hence, it remains the most widely used concept to refer to organizational- stakeholder relationships. An understanding about a stakeholder approach to CSR is an important means for a firm to enhance their commitment to operate in an economically, socially and environmentally sustainable manner. In support with above arguments, this article presents a theoretical proposition based on stakeholder theory for better CSR and firm performance. By drawing upon classic work in the field, the paper offers conceptual discussion and then systematically develops a means of stakeholder approach into corporate CSR strategy. The aim of this paper is to demonstrates the need for a firm to enhance further understanding about the role of stakeholders in the context of corporate CSR strategy, which is increasingly necessary in view of the fact that business entities are absolutely essential for economic development, but at the same time, their business activities pose a huge impact to society and the environment. Thus, firm's CSR disclosure is a pivotal tool to establish a relationship of working together with the stakeholders that ensures mutual benefit and continue to be a firm that is needed by society. This article contributes to the literature by providing a fundamental explanation of how a business should embrace responsibility for the impact of its activities on the stakeholders across various levels of the value chain. By doing so, firms are offered a means to take a much more proactive approach to CSR through the stakeholder approach which is precisely helpful in measuring the effectiveness of any CSR initiative on the society to foster business sustainability.

  2. Data-processing strategies for metabolomics studies

    NARCIS (Netherlands)

    Hendriks, M.M.W.B.; Eeuwijk, van F.A.; Jellema, R.H.; Westerhuis, J.A.; Reijmers, T.H.; Hoefsloot, H.C.J.; Smilde, A.K.

    2011-01-01

    Metabolomics studies aim at a better understanding of biochemical processes by studying relations between metabolites and between metabolites and other types of information (e.g., sensory and phenotypic features). The objectives of these studies are diverse, but the types of data generated and the

  3. Correlation between substrate bias, growth process and structural properties of phosphorus incorporated tetrahedral amorphous carbon films

    International Nuclear Information System (INIS)

    Liu Aiping; Zhu Jiaqi; Han Jiecai; Wu Huaping; Jia Zechun

    2007-01-01

    We investigate the growth process and structural properties of phosphorus incorporated tetrahedral amorphous carbon (ta-C:P) films which are deposited at different substrate biases by filtered cathodic vacuum arc technique with PH 3 as the dopant source. The films are characterized by X-ray photoelectron spectroscopy (XPS), atomic force microscopy, Raman spectroscopy, residual stress measurement, UV/VIS/NIR absorption spectroscopy and temperature-dependent conductivity measurement. The atomic fraction of phosphorus in the films as a function of substrate bias is obtained by XPS analysis. The optimum bias for phosphorus incorporation is about -80 V. Raman spectra show that the amorphous structures of all samples with atomic-scaled smooth surface are not remarkably changed when PH 3 is implanted, but some small graphitic crystallites are formed. Moreover, phosphorus impurities and higher-energetic impinging ions are favorable for the clustering of sp 2 sites dispersed in sp 3 skeleton and increase the level of structural ordering for ta-C:P films, which further releases the compressive stress and enhances the conductivity of the films. Our analysis establishes an interrelationship between microstructure, stress state, electrical properties, and substrate bias, which helps to understand the deposition mechanism of ta-C:P films

  4. Strategies and case studies for incorporating ecophysiology into southern pine tree improvement programs

    Science.gov (United States)

    Timothy A. Martin; Philip M. Dougherty; M.A. Topa; Steve E. McKeand

    2005-01-01

    Both genetic and environmental influences on tree growth are expressed through physiological processes. This central, integrating role of physiology has made the field of forest ecophysiology a major area of biological research for the past several decades. Specifically, forest ecophysiology is the study of how plants interact with their abiotic and biotic environment...

  5. Logistic strategies in purchasing process of metallurgical companies

    Directory of Open Access Journals (Sweden)

    K. Grzybowska

    2014-01-01

    Full Text Available This article presents some selected logistic strategies concerning purchasing process in production companies. Costs referring to realizing and organizing purchasing process are a substantial part of total costs of a company. In order to make a company’s purchasing and supply processes efficient, it is necessary to take some steps to prepare purchasing strategy. This operation was the reason for presenting the subject in this study.

  6. Logistic strategies in purchasing process of metallurgical companies

    OpenAIRE

    Grzybowska, K.; Gajdzik, B.

    2014-01-01

    This article presents some selected logistic strategies concerning purchasing process in production companies. Costs referring to realizing and organizing purchasing process are a substantial part of total costs of a company. In order to make a company’s purchasing and supply processes efficient, it is necessary to take some steps to prepare purchasing strategy. This operation was the reason for presenting the subject in this study.

  7. Knowledge adquisition strategies in firm innovation processes

    OpenAIRE

    Vega Jurado, Jaider; Gutiérrez Gracia, Antonio; Fernández de Lucio, Ignacio

    2009-01-01

    The recognition of external agents as an important knowledge source to innovation processes means that the firms must face a key decision: generate in-house or acquire externally the required technological knowledge. Owing to its implications, this decision has become a very important topic between academics and practitioners of innovation, promoting the development of a body of theoretical and empirical literature about the factors and motivations which influence it. This paper provides a re...

  8. Metrology Sampling Strategies for Process Monitoring Applications

    KAUST Repository

    Vincent, Tyrone L.

    2011-11-01

    Shrinking process windows in very large scale integration semiconductor manufacturing have already necessitated the development of control systems capable of addressing sub-lot-level variation. Within-wafer control is the next milestone in the evolution of advanced process control from lot-based and wafer-based control. In order to adequately comprehend and control within-wafer spatial variation, inline measurements must be performed at multiple locations across the wafer. At the same time, economic pressures prompt a reduction in metrology, for both capital and cycle-time reasons. This paper explores the use of modeling and minimum-variance prediction as a method to select the sites for measurement on each wafer. The models are developed using the standard statistical tools of principle component analysis and canonical correlation analysis. The proposed selection method is validated using real manufacturing data, and results indicate that it is possible to significantly reduce the number of measurements with little loss in the information obtained for the process control systems. © 2011 IEEE.

  9. Classroom Activities: Simple Strategies to Incorporate Student-Centered Activities within Undergraduate Science Lectures

    Science.gov (United States)

    Lom, Barbara

    2012-01-01

    The traditional science lecture, where an instructor delivers a carefully crafted monolog to a large audience of students who passively receive the information, has been a popular mode of instruction for centuries. Recent evidence on the science of teaching and learning indicates that learner-centered, active teaching strategies can be more effective learning tools than traditional lectures. Yet most colleges and universities retain lectures as their central instructional method. This article highlights several simple collaborative teaching techniques that can be readily deployed within traditional lecture frameworks to promote active learning. Specifically, this article briefly introduces the techniques of: reader’s theatre, think-pair-share, roundtable, jigsaw, in-class quizzes, and minute papers. Each technique is broadly applicable well beyond neuroscience courses and easily modifiable to serve an instructor’s specific pedagogical goals. The benefits of each technique are described along with specific examples of how each technique might be deployed within a traditional lecture to create more active learning experiences. PMID:23494568

  10. Invasive Candidiasis in Various Patient Populations: Incorporating Non-Culture Diagnostic Tests into Rational Management Strategies

    Science.gov (United States)

    Clancy, Cornelius J.; Shields, Ryan K.; Nguyen, M. Hong

    2016-01-01

    Mortality rates due to invasive candidiasis remain unacceptably high, in part because the poor sensitivity and slow turn-around time of cultures delay the initiation of antifungal treatment. β-d-glucan (Fungitell) and polymerase chain reaction (PCR)-based (T2Candida) assays are FDA-approved adjuncts to cultures for diagnosing invasive candidiasis, but their clinical roles are unclear. We propose a Bayesian framework for interpreting non-culture test results and developing rational patient management strategies, which considers test performance and types of invasive candidiasis that are most common in various patient populations. β-d-glucan sensitivity/specificity for candidemia and intra-abdominal candidiasis is ~80%/80% and ~60%/75%, respectively. In settings with 1%–10% likelihood of candidemia, anticipated β-d-glucan positive and negative predictive values are ~4%–31% and ≥97%, respectively. Corresponding values in settings with 3%–30% likelihood of intra-abdominal candidiasis are ~7%–51% and ~78%–98%. β-d-glucan is predicted to be useful in guiding antifungal treatment for wide ranges of populations at-risk for candidemia (incidence ~5%–40%) or intra-abdominal candidiasis (~7%–20%). Validated PCR-based assays should broaden windows to include populations at lower-risk for candidemia (incidence ≥~2%) and higher-risk for intra-abdominal candidiasis (up to ~40%). In the management of individual patients, non-culture tests may also have value outside of these windows. The proposals we put forth are not definitive treatment guidelines, but rather represent starting points for clinical trial design and debate by the infectious diseases community. The principles presented here will be applicable to other assays as they enter the clinic, and to existing assays as more data become available from different populations. PMID:29376927

  11. Invasive Candidiasis in Various Patient Populations: Incorporating Non-Culture Diagnostic Tests into Rational Management Strategies

    Directory of Open Access Journals (Sweden)

    Cornelius J. Clancy

    2016-02-01

    Full Text Available Mortality rates due to invasive candidiasis remain unacceptably high, in part because the poor sensitivity and slow turn-around time of cultures delay the initiation of antifungal treatment. β-d-glucan (Fungitell and polymerase chain reaction (PCR-based (T2Candida assays are FDA-approved adjuncts to cultures for diagnosing invasive candidiasis, but their clinical roles are unclear. We propose a Bayesian framework for interpreting non-culture test results and developing rational patient management strategies, which considers test performance and types of invasive candidiasis that are most common in various patient populations. β-d-glucan sensitivity/specificity for candidemia and intra-abdominal candidiasis is ~80%/80% and ~60%/75%, respectively. In settings with 1%–10% likelihood of candidemia, anticipated β-d-glucan positive and negative predictive values are ~4%–31% and ≥97%, respectively. Corresponding values in settings with 3%–30% likelihood of intra-abdominal candidiasis are ~7%–51% and ~78%–98%. β-d-glucan is predicted to be useful in guiding antifungal treatment for wide ranges of populations at-risk for candidemia (incidence ~5%–40% or intra-abdominal candidiasis (~7%–20%. Validated PCR-based assays should broaden windows to include populations at lower-risk for candidemia (incidence ≥~2% and higher-risk for intra-abdominal candidiasis (up to ~40%. In the management of individual patients, non-culture tests may also have value outside of these windows. The proposals we put forth are not definitive treatment guidelines, but rather represent starting points for clinical trial design and debate by the infectious diseases community. The principles presented here will be applicable to other assays as they enter the clinic, and to existing assays as more data become available from different populations.

  12. Incorporation of aptamers in the terminal loop of shRNAs yields an effective and novel combinatorial targeting strategy.

    Science.gov (United States)

    Pang, Ka Ming; Castanotto, Daniela; Li, Haitang; Scherer, Lisa; Rossi, John J

    2018-01-09

    Gene therapy by engineering patient's own blood cells to confer HIV resistance can potentially lead to a functional cure for AIDS. Toward this goal, we have previously developed an anti-HIV lentivirus vector that deploys a combination of shRNA, ribozyme and RNA decoy. To further improve this therapeutic vector against viral escape, we sought an additional reagent to target HIV integrase. Here, we report the development of a new strategy for selection and expression of aptamer for gene therapy. We developed a SELEX protocol (multi-tag SELEX) for selecting RNA aptamers against proteins with low solubility or stability, such as integrase. More importantly, we expressed these aptamers in vivo by incorporating them in the terminal loop of shRNAs. This novel strategy allowed efficient expression of the shRNA-aptamer fusions that targeted RNAs and proteins simultaneously. Expressed shRNA-aptamer fusions targeting HIV integrase or reverse transcriptase inhibited HIV replication in cell cultures. Viral inhibition was further enhanced by combining an anti-integrase aptamer with an anti-HIV Tat-Rev shRNA. This construct exhibited efficacy comparable to that of integrase inhibitor Raltegravir. Our strategy for the selection and expression of RNA aptamers can potentially extend to other gene therapy applications. © The Author(s) 2017. Published by Oxford University Press on behalf of Nucleic Acids Research.

  13. Incorporating resilience and cost in ecological restoration strategies at landscape scale

    Directory of Open Access Journals (Sweden)

    Maurício Stefanes

    2016-12-01

    Full Text Available The restoration of deforested or degraded areas can contribute to biodiversity conservation and global resilience given the current and projected impacts of climate change. In recent years, a robust array of ecological restoration frameworks have been generated to address restoration challenges at large scales in different ecosystems around the world. Unfortunately, the costs associated with restoration at such scales greatly challenges the implementation of such frameworks. We used landscape ecology principles with multicriteria optimization of landscape resilience and agricultural productivity as a way to mitigate the trade-offs between production and restoration. We used the Cerrado biome in Mato Grosso do Sul State, Brazil, as a case study to apply our framework. We compared three scenarios: minimal legal compliance (MLC; selection by ecological resilience (SER; and selection by restoration cost (SRC. Our results show that increasing the restoration target from MLC (25% to SER (30% means moving from 968,316 to 1592 million hectares, which can represent a huge opportunity cost for agricultural lands. However, because costs and resilience are not homogeneously distributed throughout landscapes, we can select areas of intermediate ecological resilience and low cost, for the same restoration area target. This process can reduce potential conflicts and make restoration a more viable process. Our results also reveal some areas that can be particularly important for reconciling agriculture and landscape restoration. Those areas combined high and intermediate resilience and an above average profitability. This could mean that increasing restoration in this area could be very expensive, assuming that our proxy roughly represents the restoration implementation cost. However, there is another important message here, that some areas can be productive at the same time that they maintain levels of resilience above the legal compliance, which facilitates

  14. Comparing Binaural Pre-processing Strategies II

    Directory of Open Access Journals (Sweden)

    Regina M. Baumgärtel

    2015-12-01

    Full Text Available Several binaural audio signal enhancement algorithms were evaluated with respect to their potential to improve speech intelligibility in noise for users of bilateral cochlear implants (CIs. 50% speech reception thresholds (SRT50 were assessed using an adaptive procedure in three distinct, realistic noise scenarios. All scenarios were highly nonstationary, complex, and included a significant amount of reverberation. Other aspects, such as the perfectly frontal target position, were idealized laboratory settings, allowing the algorithms to perform better than in corresponding real-world conditions. Eight bilaterally implanted CI users, wearing devices from three manufacturers, participated in the study. In all noise conditions, a substantial improvement in SRT50 compared to the unprocessed signal was observed for most of the algorithms tested, with the largest improvements generally provided by binaural minimum variance distortionless response (MVDR beamforming algorithms. The largest overall improvement in speech intelligibility was achieved by an adaptive binaural MVDR in a spatially separated, single competing talker noise scenario. A no-pre-processing condition and adaptive differential microphones without a binaural link served as the two baseline conditions. SRT50 improvements provided by the binaural MVDR beamformers surpassed the performance of the adaptive differential microphones in most cases. Speech intelligibility improvements predicted by instrumental measures were shown to account for some but not all aspects of the perceptually obtained SRT50 improvements measured in bilaterally implanted CI users.

  15. Risk communication strategy development using the aerospace systems engineering process

    Science.gov (United States)

    Dawson, S.; Sklar, M.

    2004-01-01

    This paper explains the goals and challenges of NASA's risk communication efforts and how the Aerospace Systems Engineering Process (ASEP) was used to map the risk communication strategy used at the Jet Propulsion Laboratory to achieve these goals.

  16. A strategy to synthesize graphene-incorporated lignin polymer composite materials with uniform graphene dispersion and covalently bonded interface engineering

    Science.gov (United States)

    Wang, Mei; Duong, Le Dai; Ma, Yifei; Sun, Yan; Hong, Sung Yong; Kim, Ye Chan; Suhr, Jonghwan; Nam, Jae-Do

    2017-08-01

    Graphene-incorporated polymer composites have been demonstrated to have excellent mechanical and electrical properties. In the field of graphene-incorporated composite material synthesis, there are two main obstacles: Non-uniform dispersion of graphene filler in the matrix and weak interface bonding between the graphene filler and polymer matrix. To overcome these problems, we develop an in-situ polymerization strategy to synthesize uniformly dispersed and covalently bonded graphene/lignin composites. Graphene oxide (GO) was chemically modified by 4,4'-methylene diphenyl diisocyanate (MDI) to introduce isocyanate groups and form the urethane bonds with lignin macromonomers. Subsequential polycondensation reactions of lignin groups with caprolactone and sebacoyl chloride bring about a covalent network of modified GO and lignin-based polymers. The flexible and robust lignin polycaprolactone polycondensate/modified GO (Lig-GOm) composite membranes are achieved after vacuum filtration, which have tunable hydrophilicity and electrical resistance according to the contents of GOm. This research transforms lignin from an abundant biomass into film-state composite materials, paving a new way for the utilization of biomass wastes.

  17. Incorporating Social System Dynamics into the Food-Energy-Water System Resilience-Sustainability Modeling Process

    Science.gov (United States)

    Givens, J.; Padowski, J.; Malek, K.; Guzman, C.; Boll, J.; Adam, J. C.; Witinok-Huber, R.

    2017-12-01

    In the face of climate change and multi-scalar governance objectives, achieving resilience of food-energy-water (FEW) systems requires interdisciplinary approaches. Through coordinated modeling and management efforts, we study "Innovations in the Food-Energy-Water Nexus (INFEWS)" through a case-study in the Columbia River Basin. Previous research on FEW system management and resilience includes some attention to social dynamics (e.g., economic, governance); however, more research is needed to better address social science perspectives. Decisions ultimately taken in this river basin would occur among stakeholders encompassing various institutional power structures including multiple U.S. states, tribal lands, and sovereign nations. The social science lens draws attention to the incompatibility between the engineering definition of resilience (i.e., return to equilibrium or a singular stable state) and the ecological and social system realities, more explicit in the ecological interpretation of resilience (i.e., the ability of a system to move into a different, possibly more resilient state). Social science perspectives include but are not limited to differing views on resilience as normative, system persistence versus transformation, and system boundary issues. To expand understanding of resilience and objectives for complex and dynamic systems, concepts related to inequality, heterogeneity, power, agency, trust, values, culture, history, conflict, and system feedbacks must be more tightly integrated into FEW research. We identify gaps in knowledge and data, and the value and complexity of incorporating social components and processes into systems models. We posit that socio-biophysical system resilience modeling would address important complex, dynamic social relationships, including non-linear dynamics of social interactions, to offer an improved understanding of sustainable management in FEW systems. Conceptual modeling that is presented in our study, represents

  18. Analysing and Improving the Sales Strategy and Process

    OpenAIRE

    Kuosa, Samuel

    2017-01-01

    In this thesis the intention is to identify and analyze the sales strategy and sales process of Robert Bosch Oy, which is a subsidiary of the multinational Robert Bosch GmbH. This thesis focuses on the mobility solutions business sector. The reason behind this research is to illuminate the problems the organization faces in implementing their sales strategy and sales process, and then offer improvement ideas on how they could be implemented in the Finnish market. The literature review giv...

  19. Modifying an Active Compound’s Release Kinetic Using a Supercritical Impregnation Process to Incorporate an Active Agent into PLA Electrospun Mats

    Directory of Open Access Journals (Sweden)

    Carol López de Dicastillo

    2018-04-01

    Full Text Available The main objective of this work was to study the release of cinnamaldehyde (CIN from electrospun poly lactic acid (e-PLA mats obtained through two techniques: (i direct incorporation of active compound during the electrospinning process (e-PLA-CIN; and (ii supercritical carbon dioxide (scCO2 impregnation of CIN within electrospun PLA mats (e-PLA/CINimp. The development and characterization of both of these active electrospun mats were investigated with the main purpose of modifying the release kinetic of this active compound. Morphological, structural, and thermal properties of these materials were also studied, and control mats e-PLA and e- PLA CO 2 were developed in order to understand the effect of electrospinning and scCO2 impregnation, respectively, on PLA properties. Both strategies of incorporation of this active compound into PLA matrix resulted in different morphologies that influenced chemical and physical properties of these composites and in different release kinetics of CIN. The electrospinning and scCO2 impregnation processes and the presence of CIN altered PLA thermal and structural properties when compared to an extruded PLA material. The incorporation of CIN through scCO2 impregnation resulted in higher release rate and lower diffusion coefficients when compared to active electrospun mats with CIN incorporated during the electrospinning process.

  20. Effects of nisin-incorporated films on the microbiological and physicochemical quality of minimally processed mangoes.

    Science.gov (United States)

    Barbosa, Ana Andréa Teixeira; Silva de Araújo, Hyrla Grazielle; Matos, Patrícia Nogueira; Carnelossi, Marcelo Augusto Guitierrez; Almeida de Castro, Alessandra

    2013-06-17

    The aim of this study is to examine the effects of nisin-incorporated cellulose films on the physicochemical and microbiological qualities of minimally processed mangoes. The use of antimicrobial films did not affect the physicochemical characteristics of mangoes and showed antimicrobial activity against Staphylococcus aureus, Listeria monocytogenes, Alicyclobacillus acidoterrestris and Bacillus cereus. The mango slices were inoculated with S. aureus and L. monocytogenes (10(7)CFU/g), and the viable cell numbers remained at 10(5) and 10(6)CFU/g, respectively, after 12days. In samples packed with antimicrobial films, the viable number of L. monocytogenes cells was reduced below the detection level after 4days. After 6days, a reduction of six log units was observed for S. aureus. In conclusion, nisin showed antimicrobial activity in mangoes without interfering with the organoleptic characteristics of the fruit. This result suggests that nisin could potentially be used in active packing to improve the safety of minimally processed mangoes. Copyright © 2013 Elsevier B.V. All rights reserved.

  1. New process modeling[sic], design, and control strategies for energy efficiency, high product quality, and improved productivity in the process industries. Final project report; FINAL

    International Nuclear Information System (INIS)

    Ray, W. Harmon

    2002-01-01

    This project was concerned with the development of process design and control strategies for improving energy efficiency, product quality, and productivity in the process industries. In particular, (i) the resilient design and control of chemical reactors, and (ii) the operation of complex processing systems, was investigated. Specific topics studied included new process modeling procedures, nonlinear controller designs, and control strategies for multiunit integrated processes. Both fundamental and immediately applicable results were obtained. The new design and operation results from this project were incorporated into computer-aided design software and disseminated to industry. The principles and design procedures have found their way into industrial practice

  2. IMITATION STRATEGIES FOR SME’S LEARNING PROCESS TOWARDS INNOVATION STRATEGIES

    Directory of Open Access Journals (Sweden)

    Rina Sulistiyani

    2013-01-01

    The research results are as follow: the learning experience to use imitation strategy which covers stages of imitation, research, development and  creation. This learning process is the result of interaction between personal and behavior factors, as well as the enabler and barriers. The owners of leather small industries which leave the imitation strategy and switch to innovation strategy are craftsmen who have an entrepreneurial spirit. they are able to balance entrepreneurial and business aspects.

  3. Economic Rents and Legitimacy: Incorporating Elements of Organizational Analysis Institutional Theory to the Field of Business Strategy

    Directory of Open Access Journals (Sweden)

    Marco Aurélio Lima de Queiroz

    2007-01-01

    Full Text Available Are sources of economic rent, as defined by the prevalent business strategy paradigm, sufficient to attain and maintain superior returns? The perspective developed within the conceptual framework of the Institutional Theory may offer managers a contribution towards understanding the strategy process and its potentialities,particularly by stressing the leading role played by legitimacy, the influence of many institutional spheres, the isomorphic pressures, ceremonial behavior and decoupling, among other elements, that mainstream business strategy fails to address directly, but which may have a significant effect on firm performance. We advance thatthese elements must be accounted for in the pursuit and acquisition of economic rents, even if the ability to articulate them purposefully is constrained by rationality, agency conditions and the manager's social embeddedness.

  4. A new process control strategy for aqueous film coating of pellets in fluidised bed

    DEFF Research Database (Denmark)

    Larsen, C.C.; Sonnergaard, Jørn; Bertelsen, Pernille Scholdan

    2003-01-01

    The parameters with effect on maximum spray rate and maximum relative outlet air humidity when coating pellets in a fluidised bed were investigated. The tested variables include type of water based modified release film coating (Eudragit® NE 30D, Eudragit® RS 30D, Aquacoat ECD®) coating principle...... (top spray, bottom spray), inlet air humidity and type of pellets (sugar spheres, microcrystalline cellulose pellets). The maximum spray rate was not influenced by the coating principles. The highest spray rate was obtained for the film polymer with the lowest tackiness which is assumed...... to be the controlling factor. The type of pellets affected the maximum spray rate. A thermodynamic model for the coating process is employed throughout the process and not just during steady state. The thermodynamic model is incorporated into a new process control strategy. The process control strategy is based on in...

  5. The Strategy Blueprint : A Strategy Process Computer-Aided Design Tool

    NARCIS (Netherlands)

    Aldea, Adina Ioana; Febriani, Tania Rizki; Daneva, Maya; Iacob, Maria Eugenia

    2017-01-01

    Strategy has always been a main concern of organizations because it dictates their direction, and therefore determines their success. Thus, organizations need to have adequate support to guide them through their strategy formulation process. The goal of this research is to develop a computer-based

  6. Aiming to complete the matrix: Eye-movement analysis of processing strategies in children's relational thinking.

    Science.gov (United States)

    Chen, Zhe; Honomichl, Ryan; Kennedy, Diane; Tan, Enda

    2016-06-01

    The present study examines 5- to 8-year-old children's relation reasoning in solving matrix completion tasks. This study incorporates a componential analysis, an eye-tracking method, and a microgenetic approach, which together allow an investigation of the cognitive processing strategies involved in the development and learning of children's relational thinking. Developmental differences in problem-solving performance were largely due to deficiencies in engaging the processing strategies that are hypothesized to facilitate problem-solving performance. Feedback designed to highlight the relations between objects within the matrix improved 5- and 6-year-olds' problem-solving performance, as well as their use of appropriate processing strategies. Furthermore, children who engaged the processing strategies early on in the task were more likely to solve subsequent problems in later phases. These findings suggest that encoding relations, integrating rules, completing the model, and generalizing strategies across tasks are critical processing components that underlie relational thinking. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

  7. Synergy in spreading processes: from exploitative to explorative foraging strategies.

    Science.gov (United States)

    Pérez-Reche, Francisco J; Ludlam, Jonathan J; Taraskin, Sergei N; Gilligan, Christopher A

    2011-05-27

    An epidemiological model which incorporates synergistic effects that allow the infectivity and/or susceptibility of hosts to be dependent on the number of infected neighbors is proposed. Constructive synergy induces an exploitative behavior which results in a rapid invasion that infects a large number of hosts. Interfering synergy leads to a slower and sparser explorative foraging strategy that traverses larger distances by infecting fewer hosts. The model can be mapped to a dynamical bond percolation with spatial correlations that affect the mechanism of spread but do not influence the critical behavior of epidemics. © 2011 American Physical Society

  8. Using of dynamic strategy model in innovation process

    Directory of Open Access Journals (Sweden)

    Monika Chobotová

    2013-01-01

    Full Text Available This paper incorporates a new scenario method which can use for formulate innovation strategy. The purpose of scenario is not to identify the most likely future, but to create a map of uncertainty — to acknowledge and examine the visible and hidden forces that directed toward the unknown future of a firm. Scenarios are used for capture a range of possibilities, good and bad, expected and surprising. They are designed to stretch our thinking about emerging changes and the opportunities and threats that may occur in the future. Scenario allows us to weigh our choices more carefully when making short-term and long-term strategic decisions.

  9. Incorporating gender, equity, and human rights into the action planning process: moving from rhetoric to action

    Directory of Open Access Journals (Sweden)

    Sanjeev Sridharan

    2016-09-01

    Full Text Available Background: Mainstreaming of gender, equity, and human rights (GER is an important focus of the World Health Organization (WHO and other UN organizations. This paper explores the role of action plans in mainstreaming GER. This paper is informed by a theory-driven evaluation lens. Design: A theory of change framework explored the following seven dimensions of how action plans can implement mainstreaming of GER: awareness of the foundations of GER; understanding of context; planning to impact GER; implementation for GER; monitoring, evaluation, and learning; planning for sustainability; agenda setting and buy-in. The seven dimensions were used to analyze the action plans. Reviewers also explored innovations within each of the action plans for the seven dimensions. Results: GER mainstreaming is more prominent in the foundation, background, and planning components of the plan but becomes less so along the theory of change including implementation; monitoring and evaluation; sustainability; and agenda setting and buy-in. Conclusions: Our analysis demonstrates that much more can be done to incorporate GER considerations into the action planning process. Nine specific recommendations are identified for WHO and other organizations. A theory-driven approach as described in the paper is potentially helpful for developing clarity by which action plans can help with mainstreaming GER considerations.

  10. Noise Reduction Properties of an Experimental Bituminous Slurry with Crumb Rubber Incorporated by the Dry Process

    Directory of Open Access Journals (Sweden)

    Moisés Bueno

    2014-08-01

    Full Text Available Nowadays, cold technology for asphalt pavement in the field of road construction is considered as an alternative solution to conventional procedures from both an economic and environmental point of view. Among these techniques, bituminous slurry surfacing is obtaining an important role due to the properties of the obtained wearing course. The functional performance of this type of surfaces is directly related to its rough texture. Nevertheless, this parameter has a significant influence on the tire/road noise generation. To reduce this undesirable effect on the sound performance, new designs of elastic bituminous slurries have been developed. Within the FENIX project, this work presents the acoustical characterization of an experimental bituminous slurry with crumb rubber from wasted automobile tires incorporated by the dry process. The obtained results show that, under controlled operational parameters, the close proximity sound levels associated to the experimental slurry are considerably lower than those emitted by a conventional slurry wearing course. However, after one year of supporting traffic loads and different weather conditions, the evaluated bituminous slurry, although it conserves the original noise reduction properties in relation to the conventional one, noticeably increases the generated sound emission. Therefore, it is required to continue improving the design of experimental surfaces in order to enhance its long-term performance.

  11. Incorporation of radiolabeled whey proteins into casein micelles by heat processing

    International Nuclear Information System (INIS)

    Noh, B.; Richardson, T.

    1989-01-01

    Skim milk was heated at .70, 95, and 140 degree C to simulate the processes of pasteurization, forewarming, and UHT sterilization, and the specific interactions between α-lactalbumin or β-lactoglobulin and the caseins studied using tracer amounts of added 14 C-labeled whey protein. Radioactivities of the whey and of the washed casein pellets from renneted skim milk were measured and the extent of the interaction estimated. Upon heating skim milk at 70 degree C for 45 s, less than 2% β-lactoglobulin and less than .3% α-lactalbumin were incorporated into the curd. Heating at 95 degree C for .5 to 20 min resulted in 58 to 85% of the β-lactoglobulin and 8 to 55% of the α-lactalbumin becoming associated with the curd. Heating at 140 degree C for 2 and 4 s caused 43 and 54% of the β-lactoglobulin and 9 and 12% of the α-lactalbumin, respectively, to be bound to the curd fraction. The radiolabeling technique is very sensitive and useful for tracing low levels of interaction between whey proteins and casein in heated milk systems

  12. Processes of inclusion and adverse incorporation: oil palm and agrarian change in Sumatra, Indonesia.

    Science.gov (United States)

    McCarthy, John

    2010-01-01

    Changes in globalised agriculture raise critical questions as rapid agricultural development leads to widespread social and environmental transformation. With increased global demand for vegetable oils and biofuel, in Indonesia the area under oil palm has doubled over the last decade. This paper presents a case study of how micro-processes that are linked to wider dynamics shape oil palm related agrarian change in villages in Sumatra, Indonesia. It pursues related questions regarding the impact of agribusiness-driven agriculture, the fate of smallholders experiencing contemporary agrarian transition, and the impact of increased demand for vegetable oils and biofuels on agrarian structures in Sumatra. It argues that the paths of agrarian change are highly uneven and depend on how changing livelihood strategies are enabled or constrained by economic, social and political relations that vary over time and space. In contrast to simplifying narratives of inclusion/exclusion, it argues that outcomes depend on the terms under which smallholders engage with oil palm. Distinguishing between exogenous processes of agribusiness expansion and endogenous commodity market expansion, it finds each is associated with characteristic processes of change. It concludes that the way successive policy interventions have worked with the specific characteristics of oil palm have cumulatively shaped the space where agrarian change occurs in Sumatra.

  13. Incorporating Semantic Knowledge into Dynamic Data Processing for Smart Power Grids

    Energy Technology Data Exchange (ETDEWEB)

    Zhou, Qunzhi; Simmhan, Yogesh; Prasanna, Viktor

    2012-11-15

    Semantic Web allows us to model and query time-invariant or slowly evolving knowledge using ontologies. Emerging applications in Cyber Physical Systems such as Smart Power Grids that require continuous information monitoring and integration present novel opportunities and challenges for Semantic Web technologies. Semantic Web is promising to model diverse Smart Grid domain knowledge for enhanced situation awareness and response by multi-disciplinary participants. However, current technology does pose a performance overhead for dynamic analysis of sensor measurements. In this paper, we combine semantic web and complex event processing for stream based semantic querying. We illustrate its adoption in the USC Campus Micro-Grid for detecting and enacting dynamic response strategies to peak power situations by diverse user roles. We also describe the semantic ontology and event query model that supports this. Further, we introduce and evaluate caching techniques to improve the response time for semantic event queries to meet our application needs and enable sustainable energy management.

  14. Collaboration process for integrated social and health care strategy implementation.

    Science.gov (United States)

    Korpela, Jukka; Elfvengren, Kalle; Kaarna, Tanja; Tepponen, Merja; Tuominen, Markku

    2012-01-01

    To present a collaboration process for creating a roadmap for the implementation of a strategy for integrated health and social care. The developed collaboration process includes multiple phases and uses electronic group decision support system technology (GDSS). A case study done in the South Karelia District of Social and Health Services in Finland during 2010-2011. An expert panel of 13 participants was used in the planning process of the strategy implementation. The participants were interviewed and observed during the case study. As a practical result, a roadmap for integrated health and social care strategy implementation has been developed. The strategic roadmap includes detailed plans of several projects which are needed for successful integration strategy implementation. As an academic result, a collaboration process to create such a roadmap has been developed. The collaboration process and technology seem to suit the planning process well. The participants of the meetings were satisfied with the collaboration process and the GDSS technology. The strategic roadmap was accepted by the participants, which indicates satisfaction with the developed process.

  15. Collaboration process for integrated social and health care strategy implementation

    Directory of Open Access Journals (Sweden)

    Jukka Korpela

    2012-05-01

    Full Text Available Objective:  To present collaboration process for creating a roadmap for the implementation of a strategy for integrated health and social care. The developed collaboration process includes multiple phases and uses electronic group decision support system technology (GDSS.Method: A case study done in the South Karelia District of Social and Health Services in Finland during 2010 - 2011. An expert panel of 13 participants was used in the planning process of the strategy implementation. The participants were interviewed and observed during the case study.Results: As a practical result, a roadmap for integrated health and social care strategy implementation has been developed. The strategic roadmap includes detailed plans of several projects which are needed for successful integration strategy implementation. As an academic result, a collaboration process to create such a roadmap has been developed.Conclusions: The collaboration process and technology seem to suit the planning process well. The participants of the meetings were satisfied with the collaboration process and the GDSS technology. The strategic roadmap was accepted by the participants, which indicates satisfaction with the developed process.

  16. Students Thinking Process in Compiling Mathematical Proof with Semantics Strategy

    Directory of Open Access Journals (Sweden)

    Abdussakir Abdussakir

    2015-03-01

    Full Text Available Proses Berpikir Mahasiswa dalam Menyusun Bukti Matematis dengan Strategi Semantik   Abstract: This study is aimed to reveal the thinking process in proof construction performed by students with semantic strategy. This study use descriptive-qualitative approach. The thinking process of students will be analyzed using theoretical framework of David Tall about the three worlds of mathematical thinking. The result are three ways of thinking in semantic strategy, namely (1 started from formal world  then move into the symbolic or embodied-symbolic world with possibility of more than once and ends within or outside of the formal world, (2 started from symbolic world or embodied-symbolic world then move to the formal world with possibility of more than once and ends within or outside of the formal world, and (3 all thinking processes performed outside of formal world that does not obtain formal proof. Key Words: thinking process, mathematical proof, semantic strategy   Abstrak: Penelitian ini bertujuan untuk menjelaskan proses berpikir mahasiswa dalam menyusun bukti matematis dengan strategi semantik. Penelitian ini menggunakan pendekatan deskiptif-kualitatif. Analisis data dilakukan dengan menggunakan kerangka kerja David Tall tentang tiga dunia berpikir matematik. Hasil penelitian menunjukkan bahwa terdapat enam kemungkinan jalur dalam strategi semantik ditinjau dari teori tiga dunia berpikir matematis. Hasil penelitian menunjukkan ada tiga jalur berpikir mahasiswa dalam menyusun bukti matematis dengan strategi semantik, yaitu (1 bermula dari dunia berpikir formal berpindah ke dunia berpikir wujud-simbolik atau dunia berpikir simbolik dengan proses perpindahan dimungkinkan lebih dari satu kali dan berakhir di dalam atau di luar dunia berpikir formal, (2 bermula dari dunia berpikir wujud simbolik atau dunia berpikir simbolik (non RSP lalu pindah ke dunia berpikir formal dengan proses perpindahan dimungkinkan lebih dari satu kali dan berakhir di

  17. INCORPORATION OF MECHANISTIC INFORMATION IN THE ARSENIC PBPK MODEL DEVELOPMENT PROCESS

    Science.gov (United States)

    INCORPORATING MECHANISTIC INSIGHTS IN A PBPK MODEL FOR ARSENICElaina M. Kenyon, Michael F. Hughes, Marina V. Evans, David J. Thomas, U.S. EPA; Miroslav Styblo, University of North Carolina; Michael Easterling, Analytical Sciences, Inc.A physiologically based phar...

  18. Processes in arithmetic strategy selection: A fMRI study.

    Directory of Open Access Journals (Sweden)

    Julien eTaillan

    2015-02-01

    Full Text Available This neuroimaging (fMRI study investigated neural correlates of strategy selection. Young adults performed an arithmetic task in two different conditions. In both conditions, participants had to provide estimates of two-digit multiplication problems like 54 x 78. In the choice condition, participants had to select the better of two available rounding strategies, rounding-up strategy (RU (i.e., doing 60x80 = 4,800 or rounding-down strategy (RD (i.e., doing 50x70=3,500 to estimate product of 54x78. In the no-choice condition, participants did not have to select strategy on each problem but were told which strategy to use; they executed RU and RD strategies each on a series of problems. Participants also had a control task (i.e., providing correct products of multiplication problems like 40x50. Brain activations and performance were analyzed as a function of these conditions. Participants were able to frequently choose the better strategy in the choice condition; they were also slower when they executed the difficult RU than the easier RD. Neuroimaging data showed greater brain activations in right anterior cingulate cortex (ACC, dorso-lateral prefrontal cortex (DLPFC, and angular gyrus (ANG, when selecting (relative to executing the better strategy on each problem. Moreover, RU was associated with more parietal cortex activation than RD. These results suggest an important role of fronto-parietal network in strategy selection and have important implications for our further understanding and modelling cognitive processes underlying strategy selection.

  19. Processes in arithmetic strategy selection: a fMRI study.

    Science.gov (United States)

    Taillan, Julien; Ardiale, Eléonore; Anton, Jean-Luc; Nazarian, Bruno; Félician, Olivier; Lemaire, Patrick

    2015-01-01

    This neuroimaging (functional magnetic resonance imaging) study investigated neural correlates of strategy selection. Young adults performed an arithmetic task in two different conditions. In both conditions, participants had to provide estimates of two-digit multiplication problems like 54 × 78. In the choice condition, participants had to select the better of two available rounding strategies, rounding-up (RU) strategy (i.e., doing 60 × 80 = 4,800) or rounding-down (RD) strategy (i.e., doing 50 × 70 = 3,500 to estimate product of 54 × 78). In the no-choice condition, participants did not have to select strategy on each problem but were told which strategy to use; they executed RU and RD strategies each on a series of problems. Participants also had a control task (i.e., providing correct products of multiplication problems like 40 × 50). Brain activations and performance were analyzed as a function of these conditions. Participants were able to frequently choose the better strategy in the choice condition; they were also slower when they executed the difficult RU than the easier RD. Neuroimaging data showed greater brain activations in right anterior cingulate cortex (ACC), dorso-lateral prefrontal cortex (DLPFC), and angular gyrus (ANG), when selecting (relative to executing) the better strategy on each problem. Moreover, RU was associated with more parietal cortex activation than RD. These results suggest an important role of fronto-parietal network in strategy selection and have important implications for our further understanding and modeling cognitive processes underlying strategy selection.

  20. Threat Prioritization Process for the Czech Security Strategy Making

    Directory of Open Access Journals (Sweden)

    Milos Balaban

    2012-06-01

    Full Text Available This article offers systematic view of a process of identification of security threats and, subsequently, their use in the making of strategic documents, notably the Security Strategy of the Czech Republic. It is not the aim of the authors to name or define such threats, but to present the process itself. It is paramount to any credible security strategy that it deals with the threat identification in the most precise fashion. The authors take reservations against the “catalogue” approach and claim the processes of prioritization and categorization to be essential for any policies derived from the security strategy, especially in times of economic need. It is also the 2011 final paper of the project “Trends, Risks, and Scenarios of the Security Developments in the World, Europe, and the Czech Republic – Impacts on the Policy and Security System of the Czech Republic” (TRS / VG20102013009.

  1. Strategy choice mediates the link between auditory processing and spelling.

    Science.gov (United States)

    Kwong, Tru E; Brachman, Kyle J

    2014-01-01

    Relations among linguistic auditory processing, nonlinguistic auditory processing, spelling ability, and spelling strategy choice were examined. Sixty-three undergraduate students completed measures of auditory processing (one involving distinguishing similar tones, one involving distinguishing similar phonemes, and one involving selecting appropriate spellings for individual phonemes). Participants also completed a modified version of a standardized spelling test, and a secondary spelling test with retrospective strategy reports. Once testing was completed, participants were divided into phonological versus nonphonological spellers on the basis of the number of words they spelled using phonological strategies only. Results indicated a) moderate to strong positive correlations among the different auditory processing tasks in terms of reaction time, but not accuracy levels, and b) weak to moderate positive correlations between measures of linguistic auditory processing (phoneme distinction and phoneme spelling choice in the presence of foils) and spelling ability for phonological spellers, but not for nonphonological spellers. These results suggest a possible explanation for past contradictory research on auditory processing and spelling, which has been divided in terms of whether or not disabled spellers seemed to have poorer auditory processing than did typically developing spellers, and suggest implications for teaching spelling to children with good versus poor auditory processing abilities.

  2. Influence of signal processing strategy in auditory abilities.

    Science.gov (United States)

    Melo, Tatiana Mendes de; Bevilacqua, Maria Cecília; Costa, Orozimbo Alves; Moret, Adriane Lima Mortari

    2013-01-01

    The signal processing strategy is a parameter that may influence the auditory performance of cochlear implant and is important to optimize this parameter to provide better speech perception, especially in difficult listening situations. To evaluate the individual's auditory performance using two different signal processing strategy. Prospective study with 11 prelingually deafened children with open-set speech recognition. A within-subjects design was used to compare performance with standard HiRes and HiRes 120 in three different moments. During test sessions, subject's performance was evaluated by warble-tone sound-field thresholds, speech perception evaluation, in quiet and in noise. In the silence, children S1, S4, S5, S7 showed better performance with the HiRes 120 strategy and children S2, S9, S11 showed better performance with the HiRes strategy. In the noise was also observed that some children performed better using the HiRes 120 strategy and other with HiRes. Not all children presented the same pattern of response to the different strategies used in this study, which reinforces the need to look at optimizing cochlear implant clinical programming.

  3. The competence accumulation process in the technology transference strategy

    OpenAIRE

    Souza, André Silva de; Segatto-Mendes, Andréa Paula

    2008-01-01

    The present article evaluates and measures the technological competence accumulation in an automation area enterprise to distribution centers, Knapp Sudamérica Logistic and Automation Ltd, in the interval of the technology transference process previous period (1998-2001) and during the technology transference process (2002-2005). Therefore, based on an individual case study, the study identified the technology transference strategy and mechanism accorded between the head office and the branch...

  4. Peer Review as a Strategy for Improving Students' Writing Process

    Science.gov (United States)

    Baker, Kimberly M.

    2016-01-01

    Peer review is an established strategy for improving the quality of students' writing. This study moves beyond the focus on outcomes to assess the peer-review process. In particular, this study focuses on the timing of the peer review, a highly structured feedback form, and student writers' revisions after engaging in peer review. This study draws…

  5. Rational Deletion Cloze Processing Strategies: ESL and Native English.

    Science.gov (United States)

    Markham, Paul L.

    1987-01-01

    Explores cloze sensitivity to global comprehension by means of retrospective interview techniques. No significant differences were found between English as a second language (ESL) college students (N=14) and native English-speaking students (N=14) in their processing strategies. (Author/CB)

  6. Thermo-Chemical Modelling Strategies for the Pultrusion Process

    DEFF Research Database (Denmark)

    Baran, Ismet; Hattel, Jesper Henri; Tutum, Cem Celal

    2013-01-01

    In the present study, three dimensional (3D) numerical modeling strategies of a thermosetting pultrusion process are investigated considering both transient and steady state approaches. For the transient solution, an unconditionally stable alternating direction implicit Douglas-Gunn (ADI-DG) sche...

  7. An Action Research on Deep Word Processing Strategy Instruction

    Science.gov (United States)

    Zhang, Limei

    2010-01-01

    For too long a time, how to memorize more words and keep them longer in mind has been a primary and everlasting problem for vocabulary teaching and learning. This study focused on deep processing as a word memorizing strategy in contextualizing, de- and re- contextualizing learning stages. It also examined possible effects of such pedagogy on…

  8. Short Horizon Control Strategies for an Alternating Activated Sludge Process

    DEFF Research Database (Denmark)

    Isaacs, Steven Howard

    1996-01-01

    Three control strategies allowing improved operational flexibility of an alternating type activated sludge process are presented in a unified model based framework. The control handles employed are the addition rate of an external carbon source to denitrification, the cycle length, and the dissol...

  9. Adolescent Decision-Making Processes regarding University Entry: A Model Incorporating Cultural Orientation, Motivation and Occupational Variables

    Science.gov (United States)

    Jung, Jae Yup

    2013-01-01

    This study tested a newly developed model of the cognitive decision-making processes of senior high school students related to university entry. The model incorporated variables derived from motivation theory (i.e. expectancy-value theory and the theory of reasoned action), literature on cultural orientation and occupational considerations. A…

  10. The role of RNase H2 in processing ribonucleotides incorporated during DNA replication.

    Science.gov (United States)

    Williams, Jessica S; Gehle, Daniel B; Kunkel, Thomas A

    2017-05-01

    Saccharomyces cerevisiae RNase H2 resolves RNA-DNA hybrids formed during transcription and it incises DNA at single ribonucleotides incorporated during nuclear DNA replication. To distinguish between the roles of these two activities in maintenance of genome stability, here we investigate the phenotypes of a mutant of yeast RNase H2 (rnh201-RED; ribonucleotide excision defective) that retains activity on RNA-DNA hybrids but is unable to cleave single ribonucleotides that are stably incorporated into the genome. The rnh201-RED mutant was expressed in wild type yeast or in a strain that also encodes a mutant allele of DNA polymerase ε (pol2-M644G) that enhances ribonucleotide incorporation during DNA replication. Similar to a strain that completely lacks RNase H2 (rnh201Δ), the pol2-M644G rnh201-RED strain exhibits replication stress and checkpoint activation. Moreover, like its null mutant counterpart, the double mutant pol2-M644G rnh201-RED strain and the single mutant rnh201-RED strain delete 2-5 base pairs in repetitive sequences at a high rate that is topoisomerase 1-dependent. The results highlight an important role for RNase H2 in maintaining genome integrity by removing single ribonucleotides incorporated during DNA replication. Published by Elsevier B.V.

  11. How high-performance work systems drive health care value: an examination of leading process improvement strategies.

    Science.gov (United States)

    Robbins, Julie; Garman, Andrew N; Song, Paula H; McAlearney, Ann Scheck

    2012-01-01

    As hospitals focus on increasing health care value, process improvement strategies have proliferated, seemingly faster than the evidence base supporting them. Yet, most process improvement strategies are associated with work practices for which solid evidence does exist. Evaluating improvement strategies in the context of evidence-based work practices can provide guidance about which strategies would work best for a given health care organization. We combined a literature review with analysis of key informant interview data collected from 5 case studies of high-performance work practices (HPWPs) in health care organizations. We explored the link between an evidence-based framework for HPWP use and 3 process improvement strategies: Hardwiring Excellence, Lean/Six Sigma, and Baldrige. We found that each of these process improvement strategies has not only strengths but also important gaps with respect to incorporating HPWPs involving engaging staff, aligning leaders, acquiring and developing talent, and empowering the front line. Given differences among these strategies, our analyses suggest that some may work better than others for individual health care organizations, depending on the organizations' current management systems. In practice, most organizations implementing improvement strategies would benefit from including evidence-based HPWPs to maximize the potential for process improvement strategies to increase value in health care.

  12. The Impact of a Student-Led Pedometer Intervention Incorporating Cognitive-Behavioral Strategies on Step Count and Self-Efficacy

    Science.gov (United States)

    Raedeke, Thomas D.; Focht, Brian C.; King, Jenna S.

    2010-01-01

    This study evaluated the effectiveness of a student-led physical activity intervention that incorporated pedometers and cognitive-behavioral strategies. Undergraduate students (N = 117) enrolled in upper division exercise and sport science courses recruited participants. Participants in the cognitive-behavioral intervention condition received…

  13. High-Level Waste (HLW) Feed Process Control Strategy

    International Nuclear Information System (INIS)

    STAEHR, T.W.

    2000-01-01

    The primary purpose of this document is to describe the overall process control strategy for monitoring and controlling the functions associated with the Phase 1B high-level waste feed delivery. This document provides the basis for process monitoring and control functions and requirements needed throughput the double-shell tank system during Phase 1 high-level waste feed delivery. This document is intended to be used by (1) the developers of the future Process Control Plan and (2) the developers of the monitoring and control system

  14. Didactic strategies through authentic performances in the Mathematics teaching process

    Directory of Open Access Journals (Sweden)

    Enrique Diaz Chong

    2016-09-01

    Full Text Available The main objective of this article is gather a set of Mathematic didactic strategies by improving the academic performance and acquiring skills and abilities through authentic performances during the teaching process. The investigation is going to realize with students of the first semester E and with a teacher of Commercial Studies career, applying the “learn to learn” method described in the fundaments since the application of the teaching strategy until the evaluation. Through this method, they acquire basic competence of the mentioned subject and the knowledge in order to use them as future professionals in any life circumstance. It will verify the obtained results by having a better motivation of the students and the discipline comprehension. It is important to highlight that those strategies could be applied in any other subject.

  15. Fast uncertainty reduction strategies relying on Gaussian process models

    International Nuclear Information System (INIS)

    Chevalier, Clement

    2013-01-01

    This work deals with sequential and batch-sequential evaluation strategies of real-valued functions under limited evaluation budget, using Gaussian process models. Optimal Stepwise Uncertainty Reduction (SUR) strategies are investigated for two different problems, motivated by real test cases in nuclear safety. First we consider the problem of identifying the excursion set above a given threshold T of a real-valued function f. Then we study the question of finding the set of 'safe controlled configurations', i.e. the set of controlled inputs where the function remains below T, whatever the value of some others non-controlled inputs. New SUR strategies are presented, together with efficient procedures and formulas to compute and use them in real world applications. The use of fast formulas to recalculate quickly the posterior mean or covariance function of a Gaussian process (referred to as the 'kriging update formulas') does not only provide substantial computational savings. It is also one of the key tools to derive closed form formulas enabling a practical use of computationally-intensive sampling strategies. A contribution in batch-sequential optimization (with the multi-points Expected Improvement) is also presented. (author)

  16. [A new strategy for Chinese medicine processing technologies: coupled with individuation processed and cybernetics].

    Science.gov (United States)

    Zhang, Ding-kun; Yang, Ming; Han, Xue; Lin, Jun-zhi; Wang, Jia-bo; Xiao, Xiao-he

    2015-08-01

    The stable and controllable quality of decoction pieces is an important factor to ensure the efficacy of clinical medicine. Considering the dilemma that the existing standardization of processing mode cannot effectively eliminate the variability of quality raw ingredients, and ensure the stability between different batches, we first propose a new strategy for Chinese medicine processing technologies that coupled with individuation processed and cybernetics. In order to explain this thinking, an individual study case about different grades aconite is provided. We hope this strategy could better serve for clinical medicine, and promote the inheritance and innovation of Chinese medicine processing skills and theories.

  17. Missing the mark for patient engagement: mHealth literacy strategies and behavior change processes in smoking cessation apps.

    Science.gov (United States)

    Paige, Samantha R; Alber, Julia M; Stellefson, Michael L; Krieger, Janice L

    2018-05-01

    To examine how Transtheoretical Model (TTM)'s processes of change and mHealth literacy strategies are employed in mobile smoking cessation apps. A purposive sample of 100 iTunes apps were coded to assess descriptive (price, type, developer, user-rating) and engagement metrics, including processes of change and mHealth literacy strategies (plain language, usability, interactivity). One-way ANOVAs and independent samples t-tests examined associations between descriptive and engagement metrics. Over half of the apps included 7 (78%) processes of change. Fewer included self-liberation (36%) and reinforcement management (34%). Most apps incorporated plain language, but few integrated usability and interactivity strategies. Hypnotherapy and informational apps included more behavioral processes of change than apps incorporating a combination of features, including gaming, cigarette trackers, and motivational coaching (pbehavior change processes but rarely incorporated usability and interactivity features to promote patient engagement. Engagement metrics did not vary by app user-ratings, price-to-download, or developer, including for-profit organizations or government and educational institutions. Providers should acknowledge the popularity of smoking cessation apps as potential cessation aids and communicate their benefits and drawbacks to patients. Future efforts to improve smoking cessation apps should focus on enhancing the quality of tailored and interactive content. Copyright © 2017 Elsevier B.V. All rights reserved.

  18. Ternary solution-processed organic solar cells incorporating 2D materials

    Science.gov (United States)

    Stylianakis, Minas M.; Konios, Dimitrios; Petridis, Constantinos; Kakavelakis, George; Stratakis, Emmanuel; Kymakis, Emmanuel

    2017-12-01

    Recently, the study of ternary organic solar cells (OSCs) has attracted the efforts of the scientific community, leading to significantly higher performance due to the enhanced harvesting of incoming irradiation. Here, for the first time, and in order to promote this OSC architecture, we review the progress implemented by the application of two-dimensional (2D) materials in the field of blend bulk heterojunction ternary OSCs. Power conversion efficiency (PCE) improvements of the order of 40% compared to the reference binary devices, and PCEs in excess of 8% have been reported by incorporating graphene-based or other 2D materials as a third element inside the active layer. These OSCs combine the synergetic advantages of ternary devices and the superb properties of the 2D material family. In conclusion, the incorporation of the unique properties of graphene and other 2D materials inside the active layer opens up a very promising pathway in the design and construction of high-performance, simply fabricated and low- cost photovoltaic devices.

  19. HIV-1 incorporates and proteolytically processes human NDR1 and NDR2 serine-threonine kinases

    International Nuclear Information System (INIS)

    Devroe, Eric; Silver, Pamela A.; Engelman, Alan

    2005-01-01

    Mammalian genomes encode two related serine-threonine kinases, nuclear Dbf2 related (NDR)1 and NDR2, which are homologous to the Saccharomyces cerevisiae Dbf2 kinase. Recently, a yeast genetic screen implicated the Dbf2 kinase in Ty1 retrotransposition. Since several virion-incorporated kinases regulate the infectivity of human immunodeficiency virus type 1 (HIV-1), we speculated that the human NDR1 and NDR2 kinases might play a role in the HIV-1 life cycle. Here we show that the NDR1 and NDR2 kinases were incorporated into HIV-1 particles. Furthermore, NDR1 and NDR2 were cleaved by the HIV-1 protease (PR), both within virions and within producer cells. Truncation at the PR cleavage site altered NDR2 subcellular localization and inhibited NDR1 and NDR2 enzymatic activity. These studies identify two new virion-associated host cell enzymes and suggest a novel mechanism by which HIV-1 alters the intracellular environment of human cells

  20. UV laser incorporation of dopants in silicon: comparison of two processes

    International Nuclear Information System (INIS)

    Fogarassy, E.P.; Narayan, J.; Lowndes, D.H.; White, C.H.

    1985-01-01

    The rapid deposition of pulsed-laser energy into the near-surface region of silicon leads to melting of crystal, followed by liquid phase epitaxial regrowth from the underlying substrate at a growth velocity of several meters per second. During rapid solidification, implanted or deposited group III and V impurities can be incorporated into substitutional sites in the silicon lattice with concentrations far in excess of their equilibrium solubility limit. The authors have investigated and compared the incorporation of implanted or deposited antimony into the silicon lattice during laser annealing with a pulsed KrF UV laser (lambda = 0.249 μm, Z = 35 ns). The surface melting dynamics resulting from laser irradiation have been studied by time-resolved reflectivity. In the two cases, the sharp transition to the high reflectivity phase (R = 72%, at lambda = 0.633 μm of the HeNe laser probe) is characteristic of molten silicon. Surface melt durations measured on implanted Sb (150 KeV, 5 x 10 16 cm -2 ) and deposited Sb (80 A thick on crystalline silicon) are significantly larger than those for virgin silicon

  1. INCORPORATING ENVIRONMENTAL AND ECONOMIC CONSIDERATIONS INTO PROCESS DESIGN: THE WASTE REDUCTION (WAR) ALGORITHM

    Science.gov (United States)

    A general theory known as the WAste Reduction (WASR) algorithm has been developed to describe the flow and the generation of potential environmental impact through a chemical process. This theory integrates environmental impact assessment into chemical process design Potential en...

  2. A study of palm biomass processing strategy in Sarawak

    Science.gov (United States)

    Lee, S. J. Y.; Ng, W. P. Q.; Law, K. H.

    2017-06-01

    In the past decades, palm industry is booming due to its profitable nature. An environmental concern regarding on the palm industry is the enormous amount of waste produced from palm industry. The waste produced or palm biomass is one significant renewable energy source and raw material for value-added products like fiber mats, activated carbon, dried fiber, bio-fertilizer and et cetera in Malaysia. There is a need to establish the palm biomass industry for the recovery of palm biomass for efficient utilization and waste reduction. The development of the industry is strongly depending on the two reasons, the availability and supply consistency of palm biomass as well as the availability of palm biomass processing facilities. In Malaysia, the development of palm biomass industry is lagging due to the lack of mature commercial technology and difficult logistic planning as a result of scattered locality of palm oil mill, where palm biomass is generated. Two main studies have been carried out in this research work: i) industrial study of the feasibility of decentralized and centralized palm biomass processing in Sarawak and ii) development of a systematic and optimized palm biomass processing planning for the development of palm biomass industry in Sarawak, Malaysia. Mathematical optimization technique is used in this work to model the above case scenario for biomass processing to achieve maximum economic potential and resource feasibility. An industrial study of palm biomass processing strategy in Sarawak has been carried out to evaluate the optimality of centralized processing and decentralize processing of the local biomass industry. An optimal biomass processing strategy is achieved.

  3. Data quality and processing for decision making: divergence between corporate strategy and manufacturing processes

    Science.gov (United States)

    McNeil, Ronald D.; Miele, Renato; Shaul, Dennis

    2000-10-01

    Information technology is driving improvements in manufacturing systems. Results are higher productivity and quality. However, corporate strategy is driven by a number of factors and includes data and pressure from multiple stakeholders, which includes employees, managers, executives, stockholders, boards, suppliers and customers. It is also driven by information about competitors and emerging technology. Much information is based on processing of data and the resulting biases of the processors. Thus, stakeholders can base inputs on faulty perceptions, which are not reality based. Prior to processing, data used may be inaccurate. Sources of data and information may include demographic reports, statistical analyses, intelligence reports (e.g., marketing data), technology and primary data collection. The reliability and validity of data as well as the management of sources and information is critical element to strategy formulation. The paper explores data collection, processing and analyses from secondary and primary sources, information generation and report presentation for strategy formulation and contrast this with data and information utilized to drive internal process such as manufacturing. The hypothesis is that internal process, such as manufacturing, are subordinate to corporate strategies. The impact of possible divergence in quality of decisions at the corporate level on IT driven, quality-manufacturing processes based on measurable outcomes is significant. Recommendations for IT improvements at the corporate strategy level are given.

  4. THE IMPORTANCE OF STRATEGIES IN THE SALE PROCESS

    Directory of Open Access Journals (Sweden)

    Nelu DORLE

    2016-06-01

    Full Text Available The science of marketing, in this case the art of negotiation and selling, is inseparably linked to the salesperson’s ability to think, plan and implement strategies. A good negotiator is above all, a good strategist, able to combine effectively the constituents of his/her work, from the intrinsic psychological resources (temperament, intuition, will, motivation, loquaciousness, to those related to external factors, circumstances (economic, financial situation, market competition, customer relationships. The act of selling is not confined to certain prosaic conversations between salesperson and customer, regarding needs and offers, but includes beforehand a complex process streamlined and systematized based on a set goal and on objectives measurable by shrewdly handling tactics of negotiation. The sales strategies used, from the traditional to the innovative, personalized ones, consistent with the trends and pace of life today, is therefore the essence of value in the science of sale.

  5. Nitrate control strategies in an activated sludge wastewater treatment process

    Energy Technology Data Exchange (ETDEWEB)

    Shen, Wenhao; Tao, Erpan; Chen, Xiaoquan; Liu, Dawei [South China University of Technology, Guangzhou (China); Liu, Hongbin [Kyung Hee University, Yongin (Korea, Republic of)

    2014-03-15

    We studied nitrate control strategies in an activated sludge wastewater treatment process (WWTP) based on the activated sludge model. Two control strategies, back propagation for proportional-integral-derivative (BP-PID) and adaptive-network based fuzzy inference systems (ANFIS), are applied in the WWTP. The simulation results show that the simple local constant setpoint control has poor control effects on the nitrate concentration control. However, the ANFIS (4*1) controller, which considers not only the local constant setpoint control of the nitrate concentration, but also three important indices in the effluent--ammonia concentration, total suspended sludge concentration and total nitrogen concentration--demonstrates good control performance. The results also prove that ANFIS (4*1) controller has better control performance than that of the controllers PI, BP-PID and ANFIS (2*1), and that the ANFIS (4*1) controller is effective in improving the effluent quality and maintaining the stability of the effluent quality.

  6. Digital soil mapping: strategy for data pre-processing

    Directory of Open Access Journals (Sweden)

    Alexandre ten Caten

    2012-08-01

    Full Text Available The region of greatest variability on soil maps is along the edge of their polygons, causing disagreement among pedologists about the appropriate description of soil classes at these locations. The objective of this work was to propose a strategy for data pre-processing applied to digital soil mapping (DSM. Soil polygons on a training map were shrunk by 100 and 160 m. This strategy prevented the use of covariates located near the edge of the soil classes for the Decision Tree (DT models. Three DT models derived from eight predictive covariates, related to relief and organism factors sampled on the original polygons of a soil map and on polygons shrunk by 100 and 160 m were used to predict soil classes. The DT model derived from observations 160 m away from the edge of the polygons on the original map is less complex and has a better predictive performance.

  7. A renewal jump-diffusion process with threshold dividend strategy

    Science.gov (United States)

    Li, Bo; Wu, Rong; Song, Min

    2009-06-01

    In this paper, we consider a jump-diffusion risk process with the threshold dividend strategy. Both the distributions of the inter-arrival times and the claims are assumed to be in the class of phase-type distributions. The expected discounted dividend function and the Laplace transform of the ruin time are discussed. Motivated by Asmussen [S. Asmussen, Stationary distributions for fluid flow models with or without Brownian noise, Stochastic Models 11 (1) (1995) 21-49], instead of studying the original process, we study the constructed fluid flow process and their closed-form formulas are obtained in terms of matrix expression. Finally, numerical results are provided to illustrate the computation.

  8. Calcification in the staghorn coral Acropora acuminata: variations in apparent skeletal incorporation of radioisotopes due to different methods of processing

    International Nuclear Information System (INIS)

    Crossland, C.J.; Barnes, D.J.

    1977-01-01

    Pieces of branch from the staghorn coral Acropora acuminata were incubated with 45 CaCl 2 and NaH 14 CO 3 under identical conditions in the light or in the dark. Specimens were then processed in different ways. All specimens were placed in N KOH to digest tissues. Some were placed in KOH immediately after incubation; others were placed in KOH after 2 h washing, or after 2 h extraction with methanol-chloroform-water. Specimens were washed in running fresh water or running seawater; some were killed in liquid N 2 before washing. Radioactivity associated with skeleton and tissues was determined. The method of processing profoundly affected the results. In dark incubations, there was up to a four-fold difference in apparent skeletal incorporation of 45 Ca ++ between average values obtained for the different treatments. For 14 C incorporation, there was a difference of up to 2.5 times. In light incubations, skeletal incorporation of both radioisotopes showed a two-fold difference between high and low average values obtained for the different treatments. (orig.) [de

  9. The Competence Accumulation Process in the Technology Transference Strategy

    Directory of Open Access Journals (Sweden)

    André Silva de Souza

    2008-04-01

    Full Text Available The present article evaluates and measures the technological competence accumulation in an automation area enterprise to distribution centers, Knapp Sudamérica Logistic and Automation Ltd, in the interval of the technology transference process previous period (1998-2001 and during the technology transference process(2002-2005. Therefore, based on an individual case study, the study identified the technology transference strategy and mechanism accorded between the head office and the branch office, the technological functions and activities developed by the receiver and, at last, the critical factors present in this process. The echnological competences accumulation exam was accomplished based on an analytical structure existent in the literature that was adapted to the researched segment analysis. The obtained results showed that the planed, organized, controlled and continuous effort to generating and disseminating knowledge allowed the enterprise to speed up the accumulation process of technological competences promoting the converting of this process from individual level to the organizational one: besides, it also allowed the identification of barriers and facilitators involved in this process.

  10. Incorporation of essential oil in alginate microparticles by multiple emulsion/ionic gelation process.

    Science.gov (United States)

    Hosseini, Seyede Marzieh; Hosseini, Hedayat; Mohammadifar, Mohammad Amin; Mortazavian, Amir Mohammad; Mohammadi, Abdorreza; Khosravi-Darani, Kianoosh; Shojaee-Aliabadi, Saeedeh; Dehghan, Solmaz; Khaksar, Ramin

    2013-11-01

    In this study, an o/w/o multiple emulsion/ionic gelation method was developed for production of alginate microparticles loaded with Satureja hortensis essential oil (SEO). It was found that the essential oil concentration has significant influence on encapsulation efficiency (EE), loading capacity (LC) and size of microparticles. The values of EE, LC and particle mean diameter were about 52-66%, 20-26%, and 47-117 μm, respectively, when the initial SEO content was 1-3% (v/v) .The essential oil-loaded microparticles were porous, as displayed by scanning electron micrograph. The presence of SEO in alginate microparticles was confirmed by Fourier transform-infrared (FT-IR) spectroscopy and differential scanning calorimetry (DSC) analyses. SEO-loaded microparticles showed good antioxidant (with DPPH radical scavenging activity of 40.7-73.5%) and antibacterial properties; this effect was greatly improved when the concentration of SEO was 3% (v/v). S. aureus was found to be the most sensitive bacterium to SEO and showed a highest inhibition zone of 304.37 mm(2) in the microparticles incorporated with 3% (v/v) SEO. In vitro release studies showed an initial burst release and followed by a slow release. In addition, the release of SEO from the microparticles followed Fickian diffusion with acceptable release. Copyright © 2013 Elsevier B.V. All rights reserved.

  11. Well scintillation counter with automatic sample changing and data processing: an inexpensive instrument incorporating consumer products

    International Nuclear Information System (INIS)

    Dudley, R.A.; Figdor, H.C.; Keroe, E.A.; Morris, A.C. Jr.; Mutz, O.J.

    1977-01-01

    An automatic well scintillation-counting system suitable for in vitro assays with 125 I has been designed with the express purpose of allowing effective operation and maintenance in laboratories in developing countries. The system incorporates comparatively simple components, notably two consumer products: A Kodak Carousel slide projector as sample changer and a Hewlett-Packard HP-97 programmable printing calculator as system controller and data processor. The instrument can accomodate 80 counting vials of demensions 12 mm diameter x 75 mm, or 40 vials of 16 mm diameter x 100 mm. The calculator provides on-line control and data reduction with the mediation of an interface somewhat resembling that required between a scaler and a printer. Its program capacity is adequate for fairly complicated on-line operations, including, interpolation from a standard curve in logit-log space, calculation of error in hormone concentration, and termination of counting when the counting error is rediced to a prescribed fraction of the composite of other random assay errors (as stored in the calculator's memory). This system is inexpensive, robust, and capable of being operated manually if automatic accessories fail. It could be improved in several ways, particularly by providing for operation from batteries and, no doubt in the immediate future, substitution of the next generation of cheaper and more powerful calculators. The instrument may be cost-effective in any small to medium-sized laboratory. (orig.) [de

  12. Valuable metals - recovery processes, current trends, and recycling strategies

    Energy Technology Data Exchange (ETDEWEB)

    Froehlich, Peter; Lorenz, Tom; Martin, Gunther; Brett, Beate; Bertau, Martin [Institut fuer Technische Chemie, TU Bergakademie Freiberg, Leipziger Strasse 29, 09599, Freiberg (Germany)

    2017-03-01

    This Review provides an overview of valuable metals, the supply of which has been classified as critical for Europe. Starting with a description of the current state of the art, novel approaches for their recovery from primary resources are presented as well as recycling processes. The focus lies on developments since 2005. Chemistry strategies which are used in metal recovery are summarized on the basis of the individual types of deposit and mineral. In addition, the economic importance as well as utilization of the metals is outlined. (copyright 2017 Wiley-VCH Verlag GmbH and Co. KGaA, Weinheim)

  13. Mark-18A Ion Exchange Raffinate Management Strategy & Processing Recommendations

    Energy Technology Data Exchange (ETDEWEB)

    Smith, T. E. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Nash, C. A. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2017-06-21

    It is desired to recover Cm-244 through Cm-248 from dissolved Mark-18A targets following anion exchange processing to remove the Pu. The Cm will be sent to Oak Ridge National Laboratory (ORNL) for additional R&D. Approximately 5-8 L per quarter of a Mark-18A target will have undergone anion exchange treatment and will contain Cm. A significant portion of this volume of anion exchange raffinate solution is dissolved fission products not desired to be recovered which could be sent to waste. To reduce the amount of material being sent to ORNL, a waste and volume minimization strategy was developed and is described in this report.

  14. Incorporation of environmental impact criteria in the design and operation of chemical processes

    Directory of Open Access Journals (Sweden)

    P.E. Bauer

    2004-09-01

    Full Text Available Environmental impact assessment is becoming indispensable for the design and operation of chemical plants. Structured and consistent methods for this purpose have experienced a rapid development. The more rigorous and sophisticated these methods become, the greater is the demand for convenient tools. On the other hand, despite the incredible advances in process simulators, some aspects have still not been sufficiently covered. To date, applications of these programs to quantify environmental impacts have been restricted to straightforward examples of steady-state processes. In this work, a life-cycle assessment implementation with the aim of process design will be described, with a brief discussion of a dynamic simulation for analysis of transient state operations, such as process start-up. A case study shows the importance of this analysis in making possible operation at a high performance level with reduced risks to the environment.

  15. Incorporation of human factors into design change processes - a regulator's perspective

    International Nuclear Information System (INIS)

    Staples, L.; McRobbie, H.

    2003-01-01

    Nuclear power plants in Canada must receive written approval from the Canadian Nuclear Safety Commission (CNSC) when making certain changes that are defined in their licenses. The CNSC expects the design change process to include a method for ensuring that the human-machine interface and workplace design support the safe and reliable performance of required tasks. When reviewing design changes for approval, the CNSC looks for evidence of analysis work, use of appropriate human factors design guidelines, and verification and validation testing of the design. In addition to reviewing significant design changes, evaluations are conducted to ensure design change processes adequately address human performance. Findings from reviews and evaluations highlight the need to integrate human factors into the design change process, provide human factors training and support to engineering staff, establish processes to ensure coordination between the various groups with a vested interest in human factors, and develop more rigorous methods to validate changes to maintenance, field operations and testing interfaces. (author)

  16. Production Supervision Incorporated With Network Technology-A Solution For Controlling In-Process Inventory

    Directory of Open Access Journals (Sweden)

    Suraj Yadav

    2013-06-01

    Full Text Available In context to the manufacturing management in medium scale production floor, work-in-process (WIP management or the inprocess inventory and control as the inevitable result of the production process has become a vital link of production plan. Due to the growing production requirements and the potential economic benefits of manufacturing process flow, enterprises have been pushed to integrate work-in-process management with their manufacturing process and the larger the company the larger the list of in-process inventory and this all are typically hard to manage so for the same respect the author in this paper has lighted on the integration of sophisticated electronics and networking technologies with the W.I.P with an native and low cost solution for managing the same, specially for the medium scaled company dealing with large number of product or with the customized product with reference to study of present scenario of a multinational company’s plant engineering department.

  17. Incorporating ICT Tools in an Active Engagement Strategy-Based Classroom to Promote Learning Awareness and Self-Monitoring

    Science.gov (United States)

    Kean, Ang Chooi; Embi, Mohamed Amin; Yunus, Melor Md

    2012-01-01

    The paper examines the influence of incorporating information and communication technology (ICT) tools to help learners to promote learning awareness and self-monitoring skills. An open-ended online questionnaire survey was administered to 15 course participants at the conclusion of the course. The data were analysed on the basis of the percentage…

  18. Neural PID Control Strategy for Networked Process Control

    Directory of Open Access Journals (Sweden)

    Jianhua Zhang

    2013-01-01

    Full Text Available A new method with a two-layer hierarchy is presented based on a neural proportional-integral-derivative (PID iterative learning method over the communication network for the closed-loop automatic tuning of a PID controller. It can enhance the performance of the well-known simple PID feedback control loop in the local field when real networked process control applied to systems with uncertain factors, such as external disturbance or randomly delayed measurements. The proposed PID iterative learning method is implemented by backpropagation neural networks whose weights are updated via minimizing tracking error entropy of closed-loop systems. The convergence in the mean square sense is analysed for closed-loop networked control systems. To demonstrate the potential applications of the proposed strategies, a pressure-tank experiment is provided to show the usefulness and effectiveness of the proposed design method in network process control systems.

  19. The process flow and structure of an integrated stroke strategy

    Directory of Open Access Journals (Sweden)

    Emma F. van Bussel

    2013-06-01

    Full Text Available Introduction: In the Canadian province of Alberta access and quality of stroke care were suboptimal, especially in remote areas. The government introduced the Alberta Provincial Stroke Strategy (APSS in 2005, an integrated strategy to improve access to stroke care, quality and efficiency which utilizes telehealth. Research question: What is the process flow and the structure of the care pathways of the APSS? Methodology: Information for this article was obtained using documentation, archival APSS records, interviews with experts, direct observation and participant observation. Results: The process flow is described. The APSS integrated evidence-based practice, multidisciplinary communication, and telestroke services. It includes regular quality evaluation and improvement. Conclusion: Access, efficiency and quality of care improved since the start of the APSS across many domains, through improvement of expertise and equipment in small hospitals, accessible consultation of stroke specialists using telestroke, enhancing preventive care, enhancing multidisciplinary collaboration, introducing uniform best practice protocols and bypass-protocols for the emergency medical services. Discussion: The APSS overcame substantial obstacles to decrease discrepancies and to deliver integrated higher quality care. Telestroke has proven itself to be safe and feasible. The APSS works efficiently, which is in line to other projects worldwide, and is, based on limited results, cost effective. Further research on cost-effectiveness is necessary.

  20. Process model for ammonia volatilization from anaerobic swine lagoons incorporating varying wind speeds and biogas bubbling

    Science.gov (United States)

    Ammonia volatilization from treatment lagoons varies widely with the total ammonia concentration, pH, temperature, suspended solids, atmospheric ammonia concentration above the water surface, and wind speed. Ammonia emissions were estimated with a process-based mechanistic model integrating ammonia ...

  1. Incorporating IGCC and CaO sorption-enhanced process for power generation with CO2 capture

    International Nuclear Information System (INIS)

    Chen, Shiyi; Xiang, Wenguo; Wang, Dong; Xue, Zhipeng

    2012-01-01

    Highlights: ► CaO sorption-enhanced process is incorporated with IGCC for CO 2 capture. ► IGCC–CCS is simplified using CaO sorption-enhanced process. ► The electricity efficiency is around 31–33% and CO 2 capture efficiency exceeds 95%. ► Parameters such as sorption pressure influence the system performance. -- Abstract: Integrated gasification combined cycle (IGCC) is a power generation technology to convert solid fuels into electricity. IGCC with CCS is regarded as a promising option to mitigate CO 2 emission. In this paper, the CaO sorption-enhanced process is incorporated downstream with coal gasification to produce a hydrogen-rich stream for electricity production and CO 2 separation. A WGS-absorber substitutes the high- and low-temperature water–gas shift reactors and desulfurization units in conventional IGCC–CCS to produce a hydrogen-rich stream, which is sent onto a gas turbine. CaO is used as the sorbent to enhance hydrogen production and for CO 2 capture. Regeneration of CaO is completed via calcination in a regenerator vessel. The IGCC with CaO sorption-enhanced process is modeled and simulated using Aspen Plus software. Two commercial available gasification technologies, Shell and Texaco, are integrated with the sorption-enhanced process. The results showed IGCC with CaO sorption-enhanced process has a satisfactory system performance. Even though the net electricity efficiency is not as high as expected, just around 30–33%, the system has a high CO 2 capture efficiency ∼97% and low pollutant emissions. Moreover, compared with conventional IGCC–CCS, the schematic diagram of the IGCC–CCS process is simplified. Parameters that affect the plant performance are analyzed in the sensitive analysis, including WGS-absorber temperature, H 2 O/CO ratio, pressure, etc. Some challenges to the system are also discussed.

  2. Outcomes management: incorporating and sustaining processes critical to using outcome data to guide practice improvement.

    Science.gov (United States)

    Hodges, Kay; Wotring, James R

    2012-04-01

    An outcomes management system (OMS) greatly facilitates an organization or state achieving requirements regarding accountability and use of empirically based interventions. A case example of the authors' experience with a successful and enduring OMS is presented, followed by a review of the literature and a proposed model delineating the key components and benefits of an OMS. Building capacity to measure performance requires embedding utilization of youth-specific, clinically meaningful outcome data into the organization's processes and structures. An OMS measures outcomes associated with services, facilitates implementation of evidence-based practices, informs case decision making, enables better and more efficient clinical management, and provides aggregated information used to improve services. A case-specific supervisory model based on instantaneously available information, including progress to date, helps maximize consumer outcomes. Continuous quality improvement activities, which are databased and goal-oriented, become a positive change management tool. This paper describes organizational processes that facilitate the development of a highly functional OMS.

  3. Process control through the incorporation of PLC networks in service radiation facilities

    International Nuclear Information System (INIS)

    Moehlmann, J.H.F.

    1990-01-01

    In order to ensure the smooth and safe running and operation of an irradiation facility, several regulations must be complied with, most of which are prescribed by the authorities. However, internal working regulations, based on years of practical experience, are of equal importance. The application of computers, micro-processors and PLCs, in combination with semi-conductor electronics, has improved process control considerably. Not only can every step in the process and even each detailed function be controlled, but also the combination of the different functions. By using PLC-systems in combination with computers, important data can be stored, recorded and presented in such a way that the technical staff can be warned in advance of breakdowns or undesirable deviations in the process parameters. Keeping a log of these data will help guarantee the correct functioning of the irradiation facility. It is even possible with these modern PLC techniques to monitor the control-console, so that each operation is recorded and accessible. (author)

  4. STRATEGI PENINGKATAN KOMPETENSI GURU DENGAN PENDEKATAN ANALYSIS HIERARCHY PROCESS

    Directory of Open Access Journals (Sweden)

    Reni Daharti

    2015-07-01

    Full Text Available Seorang guru sebagai seorang pendidik merupakan komponen penting dalam proses pendidikan. Penelitian ini bertujuan untuk (1 menganalisis profil guru SLTP Komwil 05 Kabupaten Tegal, (2 menganalisis prioritas kebijakan dalam meningkatkan kompetensi guru di daerah penelitian, (3 menentukan strategi untuk meningkatkan kompetensi guru melalui prioritas kebijakan yang dapat diterapkan di daerah penelitian. Respondennya adalah 33 guru SLTP Komwil 05 Kabupaten Tegal. Mereka dipilih dengan menggunakan simple random sampling. Selain itu 15 orang dipilih untuk menjadi keyperson. Statistik Deskriptif dan Analisis Hierarchy Process digunakan untuk menganalisis data dalam penelitian ini. Hasil penelitian menunjukkan bahwa kompetensi pedagogik dan kompetensi profesional guru adalah moderat dan guru memiliki kepribadian dan kompetensi sosial yang tinggi. Hal yang harus ditingkatkan adalah kompetensi guru. Prioritas utama dalam meningkatkan kompetensi guru di Kabupaten Tegal adalah (1 memilih moralitas calon guru 2 menyaring kualitas guru (3 mengirim guru untuk mengikuti berbagai pelatihan untuk meningkatkan karakter mereka.A teacher as an educator is an important component in the educational process. This study aims to (1 analyze the teacher profile of SLTP Komwil 05 Kabupaten Tegal,  (2 analyze the policy priorities in improving the competence of teachers in the study area, (3 determine the strategies for enhancing the competence of teachers through the policy priorities that can be applied in the study area. There are 33 junior high school teachers of SLTP Komwil 05 Kabupaten Tegal as the respondents. They were selected by using simple random sampling. Then, there are also15 key persons. Descriptive Statistics and Analysis Hierarchy Process were used to analyze the data in the study. The results show that pedagogical competence and professional competence are moderate and the teachers have high personality and social competence. The thing that should be

  5. Incorporating Ecosystem Processes Controlling Carbon Balance Into Models of Coupled Human-Natural Systems

    Science.gov (United States)

    Currie, W.; Brown, D. G.; Brunner, A.; Fouladbash, L.; Hadzick, Z.; Hutchins, M.; Kiger, S. E.; Makino, Y.; Nassauer, J. I.; Robinson, D. T.; Riolo, R. L.; Sun, S.

    2012-12-01

    A key element in the study of coupled human-natural systems is the interactions of human populations with vegetation and soils. In human-dominated landscapes, vegetation production and change results from a combination of ecological processes and human decision-making and behavior. Vegetation is often dramatically altered, whether to produce food for humans and livestock, to harvest fiber for construction and other materials, to harvest fuel wood or feedstock for biofuels, or simply for cultural preferences as in the case of residential lawns with sparse trees in the exurban landscape. This alteration of vegetation and its management has a substantial impact on the landscape carbon balance. Models can be used to simulate scenarios in human-natural systems and to examine the integration of processes that determine future trajectories of carbon balance. However, most models of human-natural systems include little integration of the human alteration of vegetation with the ecosystem processes that regulate carbon balance. Here we illustrate a few case studies of pilot-study models that strive for this integration from our research across various types of landscapes. We focus greater detail on a fully developed research model linked to a field study of vegetation and soils in the exurban residential landscape of Southeastern Michigan, USA. The field study characterized vegetation and soil carbon storage in 5 types of ecological zones. Field-observed carbon storage in the vegetation in these zones ranged widely, from 150 g C/m2 in turfgrass zones, to 6,000 g C/m2 in zones defined as turfgrass with sparse woody vegetation, to 16,000 g C/m2 in a zone defined as dense trees and shrubs. Use of these zones facilitated the scaling of carbon pools to the landscape, where the areal mixtures of zone types had a significant impact on landscape C storage. Use of these zones also facilitated the use of the ecosystem process model Biome-BGC to simulate C trajectories and also

  6. Creating a process for incorporating epidemiological modelling into outbreak management decisions.

    Science.gov (United States)

    Akselrod, Hana; Mercon, Monica; Kirkeby Risoe, Petter; Schlegelmilch, Jeffrey; McGovern, Joanne; Bogucki, Sandy

    2012-01-01

    Modern computational models of infectious diseases greatly enhance our ability to understand new infectious threats and assess the effects of different interventions. The recently-released CDC Framework for Preventing Infectious Diseases calls for increased use of predictive modelling of epidemic emergence for public health preparedness. Currently, the utility of these technologies in preparedness and response to outbreaks is limited by gaps between modelling output and information requirements for incident management. The authors propose an operational structure that will facilitate integration of modelling capabilities into action planning for outbreak management, using the Incident Command System (ICS) and Synchronization Matrix framework. It is designed to be adaptable and scalable for use by state and local planners under the National Response Framework (NRF) and Emergency Support Function #8 (ESF-8). Specific epidemiological modelling requirements are described, and integrated with the core processes for public health emergency decision support. These methods can be used in checklist format to align prospective or real-time modelling output with anticipated decision points, and guide strategic situational assessments at the community level. It is anticipated that formalising these processes will facilitate translation of the CDC's policy guidance from theory to practice during public health emergencies involving infectious outbreaks.

  7. Development of formulations and processes to incorporate wax oleogels in ice cream.

    Science.gov (United States)

    Zulim Botega, Daniele C; Marangoni, Alejandro G; Smith, Alexandra K; Goff, H Douglas

    2013-12-01

    The objective of this study was to investigate the influence of emulsifiers, waxes, fat concentration, and processing conditions on the application of wax oleogel to replace solid fat content and create optimal fat structure in ice cream. Ice creams with 10% or 15% fat were formulated with rice bran wax (RBW), candelilla wax (CDW), or carnauba wax (CBW) oleogels, containing 10% wax and 90% high-oleic sunflower oil. The ice creams were produced using batch or continuous freezing processes. Transmission electron microscopy (TEM) and cryo-scanning electron microscopy were used to evaluate the microstructure of ice cream and the ultrastructure of oleogel droplets in ice cream mixes. Among the wax oleogels, RBW oleogel had the ability to form and sustain structure in 15% fat ice creams when glycerol monooleate (GMO) was used as the emulsifier. TEM images revealed that the high degree of fat structuring observed in GMO samples was associated with the RBW crystal morphology within the fat droplet, which was characterized by the growth of crystals at the outer edge of the droplet. Continuous freezing improved fat structuring compared to batch freezing. RBW oleogels established better structure compared to CDW or CBW oleogels. These results demonstrate that RBW oleogel has the potential to develop fat structure in ice cream in the presence of GMO and sufficiently high concentrations of oleogel. © 2013 Institute of Food Technologists®

  8. Periglacial processes incorporated into a long-term landscape evolution model

    DEFF Research Database (Denmark)

    Andersen, Jane Lund; Egholm, D.L.; Knudsen, Mads Faurschou

    Little is known about the long-term influence of periglacial processes on landscape evolution in cold areas, even though the efficiency of frost cracking on the breakdown of rocks has been documented by observations and experiments. Cold-room laboratory experiments show that a continuous water...... supply and sustained sub- zero temperatures are essential to develop fractures in porous rocks (e.g. Murton, 2006), but the cracking efficiency for harder rock types under natural conditions is less clear. However, based on experimental results for porous rocks, Hales and Roering (2007) proposed a model...... by their model and the elevation of scree deposits in the Southern Alps, New Zealand. This result suggests a link between frost-cracking efficiency and long-term landscape evolution and thus merits further investigations. Anderson et al. (2012) expanded this early model by including the effects of latent heat...

  9. Incorporated residues to sugar cone during the industrial processing evaluated by neutron activation analysis

    International Nuclear Information System (INIS)

    Nadai Fernandes, E.A. de; Bacchi, M.A.

    1990-01-01

    In the Brazilian sugar and alcohol industry a modern agronomic and industrial technology has been developed during the last years, due to the high demand for sugarcane. The intensive harvest mechanization has increased the soil levels in the cane delivered to the mills despite of the introduced washing systems. Electric welding has been used to recuperate the rollers of the mill and other metallic components thus increasing the contents of metals in the processed material. Samples of cane, juice and bagasse were colected at several points of the milling tandem and submitted to neutron activation analysis. The concentrations of Fe, Cr, Co, Zn, Br and Cs showed an increment through the mill, indicating the contribution of the rollers wear. Sc and the rare earth elements La, Ce, Sm and Eu had about the same levels in all samples, therefore they must have come with the soil adhered to the cane. (author)

  10. Selecting a Control Strategy for Plug and Process Loads

    Energy Technology Data Exchange (ETDEWEB)

    Lobato, C.; Sheppy, M.; Brackney, L.; Pless, S.; Torcellini, P.

    2012-09-01

    Plug and Process Loads (PPLs) are building loads that are not related to general lighting, heating, ventilation, cooling, and water heating, and typically do not provide comfort to the building occupants. PPLs in commercial buildings account for almost 5% of U.S. primary energy consumption. On an individual building level, they account for approximately 25% of the total electrical load in a minimally code-compliant commercial building, and can exceed 50% in an ultra-high efficiency building such as the National Renewable Energy Laboratory's (NREL) Research Support Facility (RSF) (Lobato et al. 2010). Minimizing these loads is a primary challenge in the design and operation of an energy-efficient building. A complex array of technologies that measure and manage PPLs has emerged in the marketplace. Some fall short of manufacturer performance claims, however. NREL has been actively engaged in developing an evaluation and selection process for PPLs control, and is using this process to evaluate a range of technologies for active PPLs management that will cap RSF plug loads. Using a control strategy to match plug load use to users' required job functions is a huge untapped potential for energy savings.

  11. Penentuan Kriteria Pemilihan Strategi Sistem Manufaktur Menggunakan Analytic Hierarchy Process

    Directory of Open Access Journals (Sweden)

    Apriani Soepardi

    2012-01-01

    Full Text Available This paper presents the decision making process for the selection of criteria manufacturing system using AHP. The accuracy of the selection strategy is based on many criteria that termed as agility capabilities. Several influential criteria that is used in the selection are responsiveness, product quality, product cost, operator skills, and inventory. From these criteria, manufacturing responsiveness has the highest priority weight. On these criteria, the company cast metal is required to have the agility capabilities in reduction of lead-time for product development, new product introduction, and a wide variety of products. While the criteria for product quality takes places at second priority, followed by product cost, operator skill and inventory. From agility capability priorities that must be owned by the company of cast metal, the manufacturing system according to the characteristics of the organization and be able to respond appropriately to environmental changes is lean manufacturing system.

  12. Using disposal criteria for choosing waste processing strategy

    International Nuclear Information System (INIS)

    Lindberg, Maria; Andersson, Veronica

    2016-01-01

    Conclusion: • Reading the WAC for the repository will give guidance not only on what is allowed and in which amount but also on what needs to be documented; • Based on a Repository WAC a strategy to achieve allowed characteristics for the waste can be developed to ensure safety during the waste processing and disposal; • Characteristics that in some way are described in the disposal WAC is worth collecting information about; • If a waste form is not present declaring it as zero will make a clear statement instead of leaving the information field blank, in particular later on in the repository lifetime; • A Waste Type Description can only be as good as the Disposal WAC allows – but collect all info that is available even if it is not asked for yet; • Small reflection – don’t try to fit all waste into one WTD – it will only create more work than you really want

  13. Electron backscatter diffraction: Strategies for reliable data acquisition and processing

    International Nuclear Information System (INIS)

    Randle, Valerie

    2009-01-01

    In electron backscatter diffraction (EBSD) software packages there are many user choices both in data acquisition and in data processing and display. In order to extract maximum scientific value from an inquiry, it is helpful to have some guidelines for best practice in conducting an EBSD investigation. The purpose of this article therefore is to address selected topics of EBSD practice, in a tutorial manner. The topics covered are a brief summary on the principles of EBSD, specimen preparation, calibration of an EBSD system, experiment design, speed of data acquisition, data clean-up, microstructure characterisation (including grain size) and grain boundary characterisation. This list is not meant to cover exhaustively all areas where EBSD is used, but rather to provide a resource consisting of some useful strategies for novice EBSD users.

  14. Incorporating a quiz into informed consent processes: Qualitative study of participants' reactions

    Directory of Open Access Journals (Sweden)

    Marsh Vicki

    2007-11-01

    Full Text Available Abstract Background Formal checks of participant understanding are now widely recommended to improve informed consent processes. However, the views of the participants these assessments are designed to protect are rarely considered. In this paper the findings of a qualitative study aimed at documenting community reactions to a semi-structured questionnaire ('quiz' are reported. The quiz was administered to 189 mothers after consenting for their children to participate in a malaria vaccine trial on the Kenyan Coast. Methods Once the malaria vaccine trial was underway, focus group discussions were held with some of these mothers (nine groups; 103 mothers, and with community-based field staff attached to the malaria vaccine trial (two groups of five workers. Individual interviews with other trial staff were also held. Results The quiz prompted community members to voice concerns about blood sampling and vaccine side-effects, thereby encouraging additional discussions and interactions between the research team and potential study participants. However, it also caused significant upset and concern. Some of the quiz questions, or the way in which they were asked, appeared to fuel misconceptions and fears, with potentially negative consequences for both the study and community members. Conclusion Formal approaches to checking study understanding should be employed with sensitivity and caution. They are influenced by and impact upon complex social relationships between and among researchers and community members. Adequate consideration of these contexts in assessments of understanding, and in responding to the issues raised, requires strong social science capacity.

  15. A new general methodology for incorporating physico-chemical transformations into multi-phase wastewater treatment process models.

    Science.gov (United States)

    Lizarralde, I; Fernández-Arévalo, T; Brouckaert, C; Vanrolleghem, P; Ikumi, D S; Ekama, G A; Ayesa, E; Grau, P

    2015-05-01

    This paper introduces a new general methodology for incorporating physico-chemical and chemical transformations into multi-phase wastewater treatment process models in a systematic and rigorous way under a Plant-Wide modelling (PWM) framework. The methodology presented in this paper requires the selection of the relevant biochemical, chemical and physico-chemical transformations taking place and the definition of the mass transport for the co-existing phases. As an example a mathematical model has been constructed to describe a system for biological COD, nitrogen and phosphorus removal, liquid-gas transfer, precipitation processes, and chemical reactions. The capability of the model has been tested by comparing simulated and experimental results for a nutrient removal system with sludge digestion. Finally, a scenario analysis has been undertaken to show the potential of the obtained mathematical model to study phosphorus recovery. Copyright © 2015 Elsevier Ltd. All rights reserved.

  16. Incorporating inquiry and the process of science into introductory astronomy labs at the George Washington University

    Science.gov (United States)

    Cobb, Bethany E.

    2018-01-01

    Since 2013, the Physics Department at GWU has used student-centered active learning in the introductory astronomy course “Introduction to the Cosmos.” Class time is spent in groups on questions, math problems, and hands-on activities, with multiple instructors circulating to answer questions and engage with the students. The students have responded positively to this active-learning. Unfortunately, in transitioning to active-learning there was no time to rewrite the labs. Very quickly, the contrast between the dynamic classroom and the traditional labs became apparent. The labs were almost uniformly “cookie-cutter” in that the procedure and analysis were specified step-by-step and there was just one right answer. Students rightly criticized the labs for lacking a clear purpose and including busy-work. Furthermore, this class fulfills the GWU scientific reasoning general education requirement and thus includes learning objectives related to understanding the scientific method, testing hypotheses with data, and considering uncertainty – but the traditional labs did not require these skills. I set out to rejuvenate the lab sequence by writing new inquiry labs based on both topic-specific and scientific reasoning learning objectives. While inquiry labs can be challenging for the students, as they require active thinking and creativity, these labs engage the students more thoroughly in the scientific process. In these new labs, whenever possible, I include real astronomical data and ask the students to use digital tools (SDSS SkyServer, SOHO archive) as if they are real astronomers. To allow students to easily plot, manipulate and analyze data, I built “smart” Excel files using formulas, dropdown menus and macros. The labs are now much more authentic and thought-provoking. Whenever possible, students independently develop questions, hypotheses, and procedures and the scientific method is “scaffolded” over the semester by providing more guidance in the

  17. Strategies to Automatically Derive a Process Model from a Configurable Process Model Based on Event Data

    Directory of Open Access Journals (Sweden)

    Mauricio Arriagada-Benítez

    2017-10-01

    Full Text Available Configurable process models are frequently used to represent business workflows and other discrete event systems among different branches of large organizations: they unify commonalities shared by all branches and describe their differences, at the same time. The configuration of such models is usually done manually, which is challenging. On the one hand, when the number of configurable nodes in the configurable process model grows, the size of the search space increases exponentially. On the other hand, the person performing the configuration may lack the holistic perspective to make the right choice for all configurable nodes at the same time, since choices influence each other. Nowadays, information systems that support the execution of business processes create event data reflecting how processes are performed. In this article, we propose three strategies (based on exhaustive search, genetic algorithms and a greedy heuristic that use event data to automatically derive a process model from a configurable process model that better represents the characteristics of the process in a specific branch. These strategies have been implemented in our proposed framework and tested in both business-like event logs as recorded in a higher educational enterprise resource planning system and a real case scenario involving a set of Dutch municipalities.

  18. An overview of steps and tools for the corporate real estate strategy alignment process

    NARCIS (Netherlands)

    Appel - Meulenbroek, H.A.J.A.; Haynes, B.

    2014-01-01

    Strategic thinking is a continuous process, alternating between thinking, planning and evaluating. Corporate real estate management (CREM) practitioners need to align their strategy and activities with corporate strategy during the entire process that the organisation goes through. Along the way,

  19. Strategies of learning in the process of transformation

    DEFF Research Database (Denmark)

    Lorentzen, Anne

    2005-01-01

    The paper deals with the learning and innovation strategies of manufacturing companies in the economies of transformation.......The paper deals with the learning and innovation strategies of manufacturing companies in the economies of transformation....

  20. Visualizing time: how linguistic metaphors are incorporated into displaying instruments in the process of interpreting time-varying signals

    Science.gov (United States)

    Garcia-Belmonte, Germà

    2017-06-01

    Spatial visualization is a well-established topic of education research that has allowed improving science and engineering students' skills on spatial relations. Connections have been established between visualization as a comprehension tool and instruction in several scientific fields. Learning about dynamic processes mainly relies upon static spatial representations or images. Visualization of time is inherently problematic because time can be conceptualized in terms of two opposite conceptual metaphors based on spatial relations as inferred from conventional linguistic patterns. The situation is particularly demanding when time-varying signals are recorded using displaying electronic instruments, and the image should be properly interpreted. This work deals with the interplay between linguistic metaphors, visual thinking and scientific instrument mediation in the process of interpreting time-varying signals displayed by electronic instruments. The analysis draws on a simplified version of a communication system as example of practical signal recording and image visualization in a physics and engineering laboratory experience. Instrumentation delivers meaningful signal representations because it is designed to incorporate a specific and culturally favored time view. It is suggested that difficulties in interpreting time-varying signals are linked with the existing dual perception of conflicting time metaphors. The activation of specific space-time conceptual mapping might allow for a proper signal interpretation. Instruments play then a central role as visualization mediators by yielding an image that matches specific perception abilities and practical purposes. Here I have identified two ways of understanding time as used in different trajectories through which students are located. Interestingly specific displaying instruments belonging to different cultural traditions incorporate contrasting time views. One of them sees time in terms of a dynamic metaphor

  1. Multiwalled carbon nanotubes incorporated into a miscible blend of poly(phenylenether/polystyrene – Processing and characterization

    Directory of Open Access Journals (Sweden)

    G. Olowojoba

    2013-07-01

    Full Text Available 4 wt% multiwalled carbon nanotubes (MWCNTs were incorporated into a miscible blend of polyphenylenether/polystyrene (PPE/PS on a twin-screw extruder at a screw speed of 600 rpm. The masterbatch obtained was diluted at 400 and 600 rpm to obtain lower MWCNT loadings in PPE/PS. Electron microscopy & optical microscopy images show very good MWCNT dispersion even at high filler loadings of 4 wt%, but slightly larger agglomerate size fractions are observable at higher screw speeds. While MWCNT addition enhanced the thermal stability of PPE/PS, a small change in glass transition was observed on the composites at different filler concentrations compared to PPE/PS. The specific heat capacity at glass transition decreases considerably until 2 wt% MWCNT and levels down thereafter for both processing conditions pointing to enhanced filler-matrix interaction at lower loadings. Storage modulus of the nanocomposites was enhanced significantly on MWCNT incorporation with reinforcing effect dropping considerably as a function of temperature, especially at lower filler contents. The modulus and the tensile strength of PPE/PS were only marginally enhanced in spite of excellent MWCNT dispersion in the matrix. Electrical percolation occurs at 0.4 wt% MWCNT content, and the electrical conductivity of 0.5 wt% MWCNT reinforced PPE/PS was close to 12 orders in magnitude higher compared to PPE/PS.

  2. What dental educators need to understand about emerging technologies to incorporate them effectively into the educational process.

    Science.gov (United States)

    Stein, Corey D; Eisenberg, Elise S; O'Donnell, Jean A; Spallek, Heiko

    2014-04-01

    Many dental schools are currently struggling with the adoption of emerging technologies and the incorporation of these technologies into the educational process. Dental students exhibit an increasing degree of digital comfort when using social networking, mobile devices, search engines, or e-textbooks. Although the majority of students might consider themselves to be very skilled at using information technology, many faculty members would claim the opposite when evaluating their own knowledge and skills in the use of technology. As the use of technology, both formally and informally, continues to increase, dental educators are faced with many questions, such as: Does students' digital comfort disguise a lack of information literacy? What is the appropriate path of implementing technology into teaching and learning, and how can institutions support such an implementation? This article surveys a series of myths that exist about the use of technology in education and raises questions about their validity and how dental educators can avoid being misled by them.

  3. KaKs_Calculator 2.0: A Toolkit Incorporating Gamma-Series Methods and Sliding Window Strategies

    KAUST Repository

    Wang, Dapeng

    2010-05-05

    We present an integrated stand-alone software package named KaKs_Calculator 2.0 as an updated version. It incorporates 17 methods for the calculation of nonsynonymous and synonymous substitution rates; among them, we added our modified versions of several widely used methods as the gamma series including γ-NG, γ-LWL, γ-MLWL, γ-LPB, γ-MLPB, γ-YN and γ-MYN, which have been demonstrated to perform better under certain conditions than their original forms and are not implemented in the previous version. The package is readily used for the identification of positively selected sites based on a sliding window across the sequences of interests in 5\\' to 3\\' direction of protein-coding sequences, and have improved the overall performance on sequence analysis for evolution studies. A toolbox, including C++ and Java source code and executable files on both Windows and Linux platforms together with a user instruction, is downloadable from the website for academic purpose at https://sourceforge.net/projects/kakscalculator2/.

  4. Incorporating nitrogen atoms into cobalt nanosheets as a strategy to boost catalytic activity toward CO2 hydrogenation

    Science.gov (United States)

    Wang, Liangbing; Zhang, Wenbo; Zheng, Xusheng; Chen, Yizhen; Wu, Wenlong; Qiu, Jianxiang; Zhao, Xiangchen; Zhao, Xiao; Dai, Yizhou; Zeng, Jie

    2017-11-01

    Hydrogenation of CO2 into fuels and useful chemicals could help to reduce reliance on fossil fuels. Although great progress has been made over the past decades to improve the activity of catalysts for CO2 hydrogenation, more efficient catalysts, especially those based on non-noble metals, are desired. Here we incorporate N atoms into Co nanosheets to boost the catalytic activity toward CO2 hydrogenation. For the hydrogenation of CO2, Co4N nanosheets exhibited a turnover frequency of 25.6 h-1 in a slurry reactor under 32 bar pressure at 150 °C, which was 64 times that of Co nanosheets. The activation energy for Co4N nanosheets was 43.3 kJ mol-1, less than half of that for Co nanosheets. Mechanistic studies revealed that Co4N nanosheets were reconstructed into Co4NHx, wherein the amido-hydrogen atoms directly interacted with the CO2 to form HCOO* intermediates. In addition, the adsorbed H2O* activated amido-hydrogen atoms via the interaction of hydrogen bonds.

  5. KaKs_Calculator 2.0: A Toolkit Incorporating Gamma-Series Methods and Sliding Window Strategies

    KAUST Repository

    Wang, Dapeng; Zhang, Yubin; Zhang, Zhang; Zhu, Jiang; Yu, Jun

    2010-01-01

    We present an integrated stand-alone software package named KaKs_Calculator 2.0 as an updated version. It incorporates 17 methods for the calculation of nonsynonymous and synonymous substitution rates; among them, we added our modified versions of several widely used methods as the gamma series including γ-NG, γ-LWL, γ-MLWL, γ-LPB, γ-MLPB, γ-YN and γ-MYN, which have been demonstrated to perform better under certain conditions than their original forms and are not implemented in the previous version. The package is readily used for the identification of positively selected sites based on a sliding window across the sequences of interests in 5' to 3' direction of protein-coding sequences, and have improved the overall performance on sequence analysis for evolution studies. A toolbox, including C++ and Java source code and executable files on both Windows and Linux platforms together with a user instruction, is downloadable from the website for academic purpose at https://sourceforge.net/projects/kakscalculator2/.

  6. Application of the atomic absorption technical to available the concentration of silver ions incorporated in glass matrix by ionic exchange process

    International Nuclear Information System (INIS)

    Mendes, E.; Silva, K.F.; Teixeira, A.; Silva, L.; Paula, M.M.S.; Angioletto, E.; Riella, H.G.; Fiori, M. A.

    2009-01-01

    Ion specimens can be incorporated in glasses or natural clays by ionic exchange process with different concentrations dependent of matrix's type and of the ionic exchange parameters. In particular, the incorporation of silver ions presents high interest by its biocidal properties. A compound contending ion silver specimens presents bactericidal and fungicidal properties with effect proportional to ion concentration. This work presents results about application of the atomic absorption technical to determine the silver ion concentration incorporated in a glass matrix by ionic exchange process. The ionic exchange experiments were realized with different AgNO 3 concentration and constant temperature. After ionic exchange process, the glass samples were submitted to characterization by Energy Dispersive X-Ray Spectroscopy and Atomic Absorption Techniques. The comparative results between different techniques showed that atomic absorption technical is adequate to determine ion silver concentration incorporated in the glass matrix after ionic exchange process. (author)

  7. Design and deployment strategies for small and medium sized reactors (SMRs) to overcome loss of economies of scale and incorporate increased proliferation resistance

    International Nuclear Information System (INIS)

    Kuznetsov, V.

    2007-01-01

    The designers of innovative small and medium sized reactors pursue new design and deployment strategies making use of certain advantages provided by smaller reactor size and capacity to achieve reduced design complexity and simplified operation and maintenance requirements, and to provide for incremental capacity increase through multi-module plant clustering. Competitiveness of SMRs (Small and Medium size Reactor) depends on the incorporated strategies to overcome loss of economies of scale but equally it depends on finding appropriate market niches for such reactors. For many less developed countries, these are the features of enhanced proliferation resistance and increased robustness of barriers for sabotage protection that may ensure the progress of nuclear power. For such countries, small reactors without on-site refuelling, designed for infrequent replacement of well-contained fuel cassette(s) in a manner that impedes clandestine diversion of nuclear fuel material, may provide a solution. Based on the outputs of recent IAEA activities for innovative SMRs, the paper provides a summary of the state-of-the-art in approaches to improve SMR competitiveness and incorporate enhanced proliferation resistance and energy security. (author)

  8. Waste Receiving and Processing Module 2A waste certification strategy

    International Nuclear Information System (INIS)

    LeClair, M.D.; Pottmeyer, J.A.; Hyre, R.A.

    1994-01-01

    This document addresses the certification of Mixed Low Level Waste (MLLW) that will be treated in the Waste Receiving and Processing Facility Module 2A (WRAP 2A) and is destined for disposal in the MLLW trench of the Low Level Burial Grounds (LLBG). The MLLW that will be treated in WRAP 2A contains land disposal restricted and radioactive constituents. Certification of the treated waste is dependent on numerous waste management activities conducted throughout the WRAP 2A operation. These activities range from waste treatability testing conducted prior to WRAP 2A waste acceptance to overchecking final waste form quality prior to transferring waste to disposal. This document addresses the high level strategies and methodologies for certifying the final waste form. Integration among all design and verification activities that support final waste form quality assurance is also discussed. The information generated from this effort may directly support other ongoing activities including the WRAP 2A Waste Characterization Study, WRAP 2A Waste Analysis Plan development, Sample Plan development, and the WRAP 2A Data Management System functional requirements definition

  9. Strategy Formulation Process in Crisis Management : Volkswagen Case Study

    OpenAIRE

    Abuhajaj, Ayham; Lampis, George

    2017-01-01

    Aim: The aim of this study is to understand what strategies are used over time by a company facing a transgressional CSR crisis, in order to regain legitimacy, and towards which stakeholder group these strategies are directed. Methods: In order to achieve our aim, Qualitative case study based on secondary data published by Volkswagen as well as news articles were used to identify what strategies the company used over time. Results: To be able to answer our aim, different theoretical lense...

  10. Enhancing the performance of model-based elastography by incorporating additional a priori information in the modulus image reconstruction process

    International Nuclear Information System (INIS)

    Doyley, Marvin M; Srinivasan, Seshadri; Dimidenko, Eugene; Soni, Nirmal; Ophir, Jonathan

    2006-01-01

    Model-based elastography is fraught with problems owing to the ill-posed nature of the inverse elasticity problem. To overcome this limitation, we have recently developed a novel inversion scheme that incorporates a priori information concerning the mechanical properties of the underlying tissue structures, and the variance incurred during displacement estimation in the modulus image reconstruction process. The information was procured by employing standard strain imaging methodology, and introduced in the reconstruction process through the generalized Tikhonov approach. In this paper, we report the results of experiments conducted on gelatin phantoms to evaluate the performance of modulus elastograms computed with the generalized Tikhonov (GTK) estimation criterion relative to those computed by employing the un-weighted least-squares estimation criterion, the weighted least-squares estimation criterion and the standard Tikhonov method (i.e., the generalized Tikhonov method with no modulus prior). The results indicate that modulus elastograms computed with the generalized Tikhonov approach had superior elastographic contrast discrimination and contrast recovery. In addition, image reconstruction was more resilient to structural decorrelation noise when additional constraints were imposed on the reconstruction process through the GTK method

  11. Green supply chain management strategy selection using analytic network process: case study at PT XYZ

    Science.gov (United States)

    Adelina, W.; Kusumastuti, R. D.

    2017-01-01

    This study is about business strategy selection for green supply chain management (GSCM) for PT XYZ by using Analytic Network Process (ANP). GSCM is initiated as a response to reduce environmental impacts from industrial activities. The purposes of this study are identifying criteria and sub criteria in selecting GSCM Strategy, and analysing a suitable GSCM strategy for PT XYZ. This study proposes ANP network with 6 criteria and 29 sub criteria, which are obtained from the literature and experts’ judgements. One of the six criteria contains GSCM strategy options, namely risk-based strategy, efficiency-based strategy, innovation-based strategy, and closed loop strategy. ANP solves complex GSCM strategy-selection by using a more structured process and considering green perspectives from experts. The result indicates that innovation-based strategy is the most suitable green supply chain management strategy for PT XYZ.

  12. King eiders use an income strategy for egg production: a case study for incorporating individual dietary variation into nutrient allocation research.

    Science.gov (United States)

    Oppel, Steffen; Powell, Abby N; O'Brien, Diane M

    2010-09-01

    The use of stored nutrients for reproduction represents an important component of life-history variation. Recent studies from several species have used stable isotopes to estimate the reliance on stored body reserves in reproduction. Such approaches rely on population-level dietary endpoints to characterize stored reserves ("capital") and current diet ("income"). Individual variation in diet choice has so far not been incorporated in such approaches, but is crucial for assessing variation in nutrient allocation strategies. We investigated nutrient allocation to egg production in a large-bodied sea duck in northern Alaska, the king eider (Somateria spectabilis). We first used Bayesian isotopic mixing models to quantify at the population level the amount of endogenous carbon and nitrogen invested into egg proteins based on carbon and nitrogen isotope ratios. We then defined the isotopic signature of the current diet of every nesting female based on isotope ratios of eggshell membranes, because diets varied isotopically among individual king eiders on breeding grounds. We used these individual-based dietary isotope signals to characterize nutrient allocation for each female in the study population. At the population level, the Bayesian and the individual-based approaches yielded identical results, and showed that king eiders used an income strategy for the synthesis of egg proteins. The majority of the carbon and nitrogen in albumen (C: 86 +/- 18%, N: 99 +/- 1%) and the nitrogen in lipid-free yolk (90 +/- 15%) were derived from food consumed on breeding grounds. Carbon in lipid-free yolk derived evenly from endogenous sources and current diet (exogenous C: 54 +/- 24%), but source contribution was highly variable among individual females. These results suggest that even large-bodied birds traditionally viewed as capital breeders use exogenous nutrients for reproduction. We recommend that investigations of nutrient allocation should incorporate individual variation into

  13. King eider use an income strategy for egg production: a case study for incorporating individual dietary variation into nutrient allocation research

    Science.gov (United States)

    Oppel, Steffen; Powell, Abby N.; O'Brien, Diane M.

    2010-01-01

    The use of stored nutrients for reproduction represents an important component of life-history variation. Recent studies from several species have used stable isotopes to estimate the reliance on stored body reserves in reproduction. Such approaches rely on population-level dietary endpoints to characterize stored reserves (“capital”) and current diet (“income”). Individual variation in diet choice has so far not been incorporated in such approaches, but is crucial for assessing variation in nutrient allocation strategies. We investigated nutrient allocation to egg production in a large-bodied sea duck in northern Alaska, the king eider (Somateria spectabilis). We first used Bayesian isotopic mixing models to quantify at the population level the amount of endogenous carbon and nitrogen invested into egg proteins based on carbon and nitrogen isotope ratios. We then defined the isotopic signature of the current diet of every nesting female based on isotope ratios of eggshell membranes, because diets varied isotopically among individual king eiders on breeding grounds. We used these individual-based dietary isotope signals to characterize nutrient allocation for each female in the study population. At the population level, the Bayesian and the individual-based approaches yielded identical results, and showed that king eiders used an income strategy for the synthesis of egg proteins. The majority of the carbon and nitrogen in albumen (C: 86 ± 18%, N: 99 ± 1%) and the nitrogen in lipid-free yolk (90 ± 15%) were derived from food consumed on breeding grounds. Carbon in lipid-free yolk derived evenly from endogenous sources and current diet (exogenous C: 54 ± 24%), but source contribution was highly variable among individual females. These results suggest that even large-bodied birds traditionally viewed as capital breeders use exogenous nutrients for reproduction. We recommend that investigations of nutrient allocation should incorporate individual

  14. Variable Selection for Nonparametric Gaussian Process Priors: Models and Computational Strategies.

    Science.gov (United States)

    Savitsky, Terrance; Vannucci, Marina; Sha, Naijun

    2011-02-01

    This paper presents a unified treatment of Gaussian process models that extends to data from the exponential dispersion family and to survival data. Our specific interest is in the analysis of data sets with predictors that have an a priori unknown form of possibly nonlinear associations to the response. The modeling approach we describe incorporates Gaussian processes in a generalized linear model framework to obtain a class of nonparametric regression models where the covariance matrix depends on the predictors. We consider, in particular, continuous, categorical and count responses. We also look into models that account for survival outcomes. We explore alternative covariance formulations for the Gaussian process prior and demonstrate the flexibility of the construction. Next, we focus on the important problem of selecting variables from the set of possible predictors and describe a general framework that employs mixture priors. We compare alternative MCMC strategies for posterior inference and achieve a computationally efficient and practical approach. We demonstrate performances on simulated and benchmark data sets.

  15. Development of silica nanoparticles obtaintion process from renewable source waste and its incorporation in thermoplastic polymer for manufacturing a nanocomposite

    International Nuclear Information System (INIS)

    Ortiz, Angel Visentim

    2016-01-01

    The nanocomposite technology is applicable to a wide range of thermoplastic and thermoset polymers. The use of sugar cane byproducts has been extensively studied as a source of reinforcement for nanocomposites. The bagasse is widely used in cogeneration and as a result of the burning of this material, millions of tons of ash are produced. For this work, silica contained in the ashes of bagasse from sugarcane was extracted by chemical method and thermal method. The thermal method is more efficient leading to a purity of more than 93% of silica, while the chemical method generated silica contaminated with chlorine and sodium from the extraction reagents. The silica particles obtained were evaluated by dynamic light scattering (DSL) and presented an average size of 12 micrometers. These particles were submitted to grinding in a ball mill and then to a sonochemical treatment. Silica particles treated by the sonochemical process ( 20 kHz, 500 W and 90 minutes) had its dimensions reduced to nanometric scale of tenths of nanometers. The nanossílica obtained was then used as reinforcement in high density polyethylene (HDPE). Mechanical and thermo-mechanical properties were assessed and gains were shown for mechanical properties , except for the impact resistance. The distortion temperature (HDT) showed that the incorporation of the reinforcement in HDPE led to a small increase in this property compared to pure HDPE. The crystallinity of the nanocomposites generated was evaluated by differential scanning calorimetry (DSC) and it was observed a decrease of crystallinity in the material when the reinforcing incorporation was 3%. The material irradiated to 250 kGy with electron beam showed important property gains, mainly due to the high level of crosslinking of irradiated HDPE. (author)

  16. Advanced processing of gallium nitride and gallium nitride-based devices: Ultra-high temperature annealing and implantation incorporation

    Science.gov (United States)

    Yu, Haijiang

    This dissertation is focused on three fields: ultra-high temperature annealing of GaN, activation of implanted GaN and the implantation incorporation into AlGaN/GaN HEMT processing, with an aim to increase the performance, manufacturability and reliability of AlGaN/GaN HEMTs. First, the ultra high temperature (around 1500°C) annealing of MOCVD grown GaN on sapphire has been studied, and a thermally induced threading dislocation (TD) motion and reaction are reported. Using a rapid thermal annealing (RTA) approach capable of heating 2 inch wafers to around 1500°C with 100 bar N2 over-pressure, evidence of dislocation motion was first observed in transmission electron microscopy (TEM) micrographs of both planar and patterned GaN films protected by an AIN capping layer. An associated decrease in x-ray rocking curve (XRC) full-width-half-maximum (FWHM) was also observed for both the symmetric and asymmetric scans. After annealing, the AIN capping layer remained intact, and optical measurements showed no degradation of the opto-electronic properties of the films. Then activation annealing of Si implants in MOCVD grown GaN has been studied for use in ohmic contacts. Si was implanted in semi-insulating GaN at 100 keV with doses from 5 x 1014 cm-2 to 1.5 x 1016 cm-2. Rapid thermal annealing at 1500°C with 100 bar N2 over-pressure was used for dopant activation, resulting in a minimum sheet resistance of 13.9 O/square for a dose of 7 x 1015 cm-2. Secondary ion mass spectroscopy measurements showed a post-activation broadening of the dopant concentration peak by 20 nm (at half the maximum), while X-Ray triple axis o-2theta scans indicated nearly complete implant damage recovery. Transfer length method measurements of the resistance of Ti/Al/Ni/Au contacts to activated GaN:Si (5 x 1015 cm-2 at 100 keV) indicated lowest contact resistances of 0.07 Omm and 0.02 Omm for as-deposited and subsequently annealed contacts, respectively. Finally, the incorporation of Si implantation

  17. Natural language processing in an intelligent writing strategy tutoring system.

    Science.gov (United States)

    McNamara, Danielle S; Crossley, Scott A; Roscoe, Rod

    2013-06-01

    The Writing Pal is an intelligent tutoring system that provides writing strategy training. A large part of its artificial intelligence resides in the natural language processing algorithms to assess essay quality and guide feedback to students. Because writing is often highly nuanced and subjective, the development of these algorithms must consider a broad array of linguistic, rhetorical, and contextual features. This study assesses the potential for computational indices to predict human ratings of essay quality. Past studies have demonstrated that linguistic indices related to lexical diversity, word frequency, and syntactic complexity are significant predictors of human judgments of essay quality but that indices of cohesion are not. The present study extends prior work by including a larger data sample and an expanded set of indices to assess new lexical, syntactic, cohesion, rhetorical, and reading ease indices. Three models were assessed. The model reported by McNamara, Crossley, and McCarthy (Written Communication 27:57-86, 2010) including three indices of lexical diversity, word frequency, and syntactic complexity accounted for only 6% of the variance in the larger data set. A regression model including the full set of indices examined in prior studies of writing predicted 38% of the variance in human scores of essay quality with 91% adjacent accuracy (i.e., within 1 point). A regression model that also included new indices related to rhetoric and cohesion predicted 44% of the variance with 94% adjacent accuracy. The new indices increased accuracy but, more importantly, afford the means to provide more meaningful feedback in the context of a writing tutoring system.

  18. Reduction of the interfacial trap density of indium-oxide thin film transistors by incorporation of hafnium and annealing process

    Directory of Open Access Journals (Sweden)

    Meng-Fang Lin

    2015-01-01

    Full Text Available The stable operation of transistors under a positive bias stress (PBS is achieved using Hf incorporated into InOx-based thin films processed at relatively low temperatures (150 to 250 °C. The mobilities of the Hf-InOx thin-film transistors (TFTs are higher than 8 cm2/Vs. The TFTs not only have negligible degradation in the mobility and a small shift in the threshold voltage under PBS for 60 h, but they are also thermally stable at 85 °C in air, without the need for a passivation layer. The Hf-InOx TFT can be stable even annealed at 150 °C for positive bias temperature stability (PBTS. A higher stability is achieved by annealing the TFTs at 250 °C, originating from a reduction in the trap density at the Hf-InOx/gate insulator interface. The knowledge obtained here will aid in the realization of stable TFTs processed at low temperatures.

  19. Phase mapping of aging process in InN nanostructures: oxygen incorporation and the role of the zinc blende phase

    International Nuclear Information System (INIS)

    Gonzalez, D; Lozano, J G; Herrera, M; Morales, F M; GarcIa, R; Ruffenach, S; Briot, O

    2010-01-01

    Uncapped InN nanostructures undergo a deleterious natural aging process at ambient conditions by oxygen incorporation. The phases involved in this process and their localization is mapped by transmission electron microscopy (TEM)-related techniques. The parent wurtzite InN (InN-w) phase disappears from the surface and gradually forms a highly textured cubic layer that completely wraps up a InN-w nucleus which still remains from the original single-crystalline quantum dots. The good reticular relationships between the different crystals generate low misfit strains and explain the apparent easiness for phase transformations at room temperature and pressure conditions, but also disable the classical methods to identify phases and grains from TEM images. The application of the geometrical phase algorithm in order to form numerical moire mappings and RGB multilayered image reconstructions allows us to discern among the different phases and grains formed inside these nanostructures. Samples aged for shorter times reveal the presence of metastable InN:O zinc blende (zb) volumes, which act as the intermediate phase between the initial InN-w and the most stable cubic In 2 O 3 end phase. These cubic phases are highly twinned with a proportion of 50:50 between both orientations. We suggest that the existence of the intermediate InN:O-zb phase should be seriously considered to understand the reason for the widely scattered reported fundamental properties of thought to be InN-w, as its bandgap or superconductivity.

  20. Does the incorporation of portion-control strategies in a behavioral program improve weight loss in a 1-year randomized controlled trial?

    Science.gov (United States)

    Rolls, B J; Roe, L S; James, B L; Sanchez, C E

    2017-03-01

    Controlling food portion sizes can help reduce energy intake, but the effect of different portion-control methods on weight management is not known. In a 1-year randomized trial, we tested whether the efficacy of a behavioral weight-loss program was improved by incorporating either of the two portion-control strategies instead of standard advice about eating less. The Portion-Control Strategies Trial included 186 women with obesity (81%) or overweight (19%). Participants were randomly assigned to one of three equally intensive behavioral programs, consisting of 19 individual sessions over 12 months. The Standard Advice Group was instructed to eat less food while making healthy choices, the Portion Selection Group was instructed to choose portions based on the energy density using tools such as food scales and the Pre-portioned Foods Group was instructed to structure meals around pre-portioned foods such as single-serving main dishes, for which some vouchers were provided. In an intention-to-treat analysis, a mixed-effects model compared weight loss trajectories across 23 measurements; at month 12, weight was measured for 151 participants (81%). The trajectories showed that the Pre-portioned Foods Group initially lost weight at a greater rate than the other two groups (P=0.021), but subsequently regained weight at a greater rate (P=0.0005). As a result, weight loss did not differ significantly across groups at month 6 (mean±s.e. 5.2±0.4 kg) or month 12 (4.5±0.5 kg). After 1 year, measured weight loss averaged 6% of baseline weight. The frequency of using portion-control strategies initially differed across groups, then declined over time and converged at months 6 and 12. Incorporating instruction on portion-control strategies within a 1-year behavioral program did not lead to a greater weight loss than standard advice. Using pre-portioned foods enhanced early weight loss, but this was not sustained over time. Long-term maintenance of behavioral strategies to

  1. A systematic review investigating healthy lifestyle interventions incorporating goal setting strategies for preventing excess gestational weight gain.

    Directory of Open Access Journals (Sweden)

    Mary Jane Brown

    Full Text Available BACKGROUND: Excess gestational weight gain (GWG is an important risk factor for long term obesity in women. However, current interventions aimed at preventing excess GWG appear to have a limited effect. Several studies have highlighted the importance of linking theory with empirical evidence for producing effective interventions for behaviour change. Theorists have demonstrated that goals can be an important source of human motivation and goal setting has shown promise in promoting diet and physical activity behaviour change within non-pregnant individuals. The use of goal setting as a behaviour change strategy has been systematically evaluated within overweight and obese individuals, yet its use within pregnancy has not yet been systematically explored. AIM OF REVIEW: To explore the use of goal setting within healthy lifestyle interventions for the prevention of excess GWG. DATA COLLECTION AND ANALYSIS: Searches were conducted in seven databases alongside hand searching of relevant journals and citation tracking. Studies were included if interventions used goal setting alongside modification of diet and/or physical activity with an aim to prevent excess GWG. The PRISMA guidelines were followed and a two-stage methodological approach was used. Stage one focused on systematically evaluating the methodological quality of included interventions. The second stage assessed intervention integrity and the implementation of key goal setting components. FINDINGS: From a total of 839 citations, 54 full-text articles were assessed for eligibility and 5 studies met the inclusion criteria. Among interventions reporting positive results a combination of individualised diet and physical activity goals, self-monitoring and performance feedback indicators were described as active components. CONCLUSION: Interventions based on goal setting appear to be useful for helping women achieve optimal weight gain during pregnancy. However, overweight and obese women may

  2. A systematic review investigating healthy lifestyle interventions incorporating goal setting strategies for preventing excess gestational weight gain.

    Science.gov (United States)

    Brown, Mary Jane; Sinclair, Marlene; Liddle, Dianne; Hill, Alyson J; Madden, Elaine; Stockdale, Janine

    2012-01-01

    Excess gestational weight gain (GWG) is an important risk factor for long term obesity in women. However, current interventions aimed at preventing excess GWG appear to have a limited effect. Several studies have highlighted the importance of linking theory with empirical evidence for producing effective interventions for behaviour change. Theorists have demonstrated that goals can be an important source of human motivation and goal setting has shown promise in promoting diet and physical activity behaviour change within non-pregnant individuals. The use of goal setting as a behaviour change strategy has been systematically evaluated within overweight and obese individuals, yet its use within pregnancy has not yet been systematically explored. To explore the use of goal setting within healthy lifestyle interventions for the prevention of excess GWG. Searches were conducted in seven databases alongside hand searching of relevant journals and citation tracking. Studies were included if interventions used goal setting alongside modification of diet and/or physical activity with an aim to prevent excess GWG. The PRISMA guidelines were followed and a two-stage methodological approach was used. Stage one focused on systematically evaluating the methodological quality of included interventions. The second stage assessed intervention integrity and the implementation of key goal setting components. From a total of 839 citations, 54 full-text articles were assessed for eligibility and 5 studies met the inclusion criteria. Among interventions reporting positive results a combination of individualised diet and physical activity goals, self-monitoring and performance feedback indicators were described as active components. Interventions based on goal setting appear to be useful for helping women achieve optimal weight gain during pregnancy. However, overweight and obese women may require more theoretically-designed interventions. Further high quality, theoretically

  3. RT-CaCCO process: an improved CaCCO process for rice straw by its incorporation with a step of lime pretreatment at room temperature.

    Science.gov (United States)

    Shiroma, Riki; Park, Jeung-yil; Al-Haq, Muhammad Imran; Arakane, Mitsuhiro; Ike, Masakazu; Tokuyasu, Ken

    2011-02-01

    We improved the CaCCO process for rice straw by its incorporation with a step of lime pretreatment at room temperature (RT). We firstly optimized the RT-lime pretreatment for the lignocellulosic part. When the ratio of lime/dry-biomass was 0.2 (w/w), the RT lime-pretreatment for 7-d resulted in an effect on the enzymatic saccharification of cellulose and xylan equivalent to that of the pretreatment at 120°C for 1h. Sucrose, starch and β-1,3-1,4-glucan, which could be often detected in rice straw, were mostly stable under the RT-lime pretreatment condition. Then, the pretreatment condition in the conventional CaCCO process was modified by the adaptation of the optimized RT lime-pretreatment, resulting in significantly better carbohydrate recoveries via enzymatic saccharification than those of the CaCCO process (120°C for 1 h). Thus, the improved CaCCO process (the RT-CaCCO process) could preserve/pretreat the feedstock at RT in a wet form with minimum loss of carbohydrates. Copyright © 2010 Elsevier Ltd. All rights reserved.

  4. Gender and poverty reduction strategy processes in Latin America

    OpenAIRE

    Dijkstra, Geske

    2007-01-01

    textabstractIn 1999, countries that wished to qualify for the Enhanced Initiative for the Heavily Indebted Poor Countries (HIPC initiative) had to elaborate Poverty Reduction Strategy Papers (PRSP) and had to do so with participation of civil society. Since then, the elaboration and subsequent implementation of PRSs (Poverty Reduction Strategies)have been seen as a tool for the international donor community to guarantee that not only debt relief, but also aid in general would be spent well. T...

  5. Transuranic Waste Processing Center (TWPC) Legacy Tank RH-TRU Sludge Processing and Compliance Strategy - 13255

    Energy Technology Data Exchange (ETDEWEB)

    Rogers, Ben C.; Heacker, Fred K.; Shannon, Christopher [Wastren Advantage, Inc., Transuranic Waste Processing Center, 100 WIPP Road, Lenoir City, Tennessee 37771 (United States); and others

    2013-07-01

    and install the necessary integrated systems to process the accumulated MVST Facilities SL inventory at the TWPC thus enabling safe and effective disposal of the waste. This BCP does not include work to support current MVST Facility Surveillance and Maintenance programs or the ORNL Building 3019 U-233 Disposition project, since they are not currently part of the TWPC prime contract. The purpose of the environmental compliance strategy is to identify the environmental permits and other required regulatory documents necessary for the construction and operation of the SL- PFB at the TWPC, Oak Ridge, TN. The permits and other regulatory documents identified are necessary to comply with the environmental laws and regulations of DOE Orders, and other requirements documented in the SL-PFB, Safety Design Strategy (SDS), SL-A-AD-002, R0 draft, and the Systems, Function and Requirements Document (SFRD), SL-X-AD-002, R1 draft. This compliance strategy is considered a 'living strategy' and it is anticipated that it will be revised as design progresses and more detail is known. The design basis on which this environmental permitting and compliance strategy is based is the Wastren Advantage, Inc., (WAI), TWPC, SL-PFB (WAI-BL-B.01.06) baseline. (authors)

  6. Transuranic Waste Processing Center (TWPC) Legacy Tank RH-TRU Sludge Processing and Compliance Strategy - 13255

    International Nuclear Information System (INIS)

    Rogers, Ben C.; Heacker, Fred K.; Shannon, Christopher

    2013-01-01

    the necessary integrated systems to process the accumulated MVST Facilities SL inventory at the TWPC thus enabling safe and effective disposal of the waste. This BCP does not include work to support current MVST Facility Surveillance and Maintenance programs or the ORNL Building 3019 U-233 Disposition project, since they are not currently part of the TWPC prime contract. The purpose of the environmental compliance strategy is to identify the environmental permits and other required regulatory documents necessary for the construction and operation of the SL- PFB at the TWPC, Oak Ridge, TN. The permits and other regulatory documents identified are necessary to comply with the environmental laws and regulations of DOE Orders, and other requirements documented in the SL-PFB, Safety Design Strategy (SDS), SL-A-AD-002, R0 draft, and the Systems, Function and Requirements Document (SFRD), SL-X-AD-002, R1 draft. This compliance strategy is considered a 'living strategy' and it is anticipated that it will be revised as design progresses and more detail is known. The design basis on which this environmental permitting and compliance strategy is based is the Wastren Advantage, Inc., (WAI), TWPC, SL-PFB (WAI-BL-B.01.06) baseline. (authors)

  7. Technology strategy for subsea processing and transport; Technology Target Areas; TTA6 - Subsea processing and transportation

    Energy Technology Data Exchange (ETDEWEB)

    2008-07-01

    OG21 (www.OG21.org) Norway's official technology strategy for the petroleum sector issued a revised strategy document in November 2005 (new strategy planned in 2009). In this document 'Subsea processing and transport' was identified as one of the eight new technology target areas (TTAs). The overall OG21 strategy document is on an aggregated level, and therefore the Board of OG21 decided that a sub-strategy for each TTA was needed. This document proposes the sub-strategy for the technology target area 'Subsea processing and transport' which covers the technology and competence necessary to effectively transport well stream to a platform or to onshore facilities. This includes multiphase flow modelling, flow assurance challenges to avoid problems with hydrates, asphaltenes and wax, subsea or downhole fluid conditioning including bulk water removal, and optionally complete water removal, and sand handling. It also covers technologies to increase recovery by pressure boosting from subsea pumping and/or subsea compression. Finally it covers technologies to facilitate subsea processing such as control systems and power supply. The vision of the Subsea processing and transport TTA is: Norway is to be the leading international knowledge- and technology cluster in subsea processing and transport: Sustain increased recovery and accelerated production on the NCS by applying subsea processing and efficient transport solutions; Enable >500 km gas/condensate multiphase well stream transport; Enable >200 km oil-dominated multiphase well stream transport; Enable well stream transport of complex fluids; Enable subsea separation, boosting compression, and water injection; Enable deepwater developments; Enable environmentally friendly and energy efficient field development. Increase the export of subsea processing and transport technology: Optimize technology from the NCS for application worldwide; Develop new technology that can meet the challenges found in

  8. Effective Strategies to Spread Redesigning Care Processes Among Healthcare Teams.

    Science.gov (United States)

    Lavoie-Tremblay, Mélanie; O'Connor, Patricia; Lavigne, Geneviève L; Briand, Anaïck; Biron, Alain; Baillargeon, Sophie; MacGibbon, Brenda; Ringer, Justin; Cyr, Guylaine

    2015-07-01

    The purpose of this study was to describe how spread strategies facilitate the successful implementation of the Transforming Care at the Bedside (TCAB) program and their impact on healthcare workers and patients in a major Canadian healthcare organization. This study used a qualitative and descriptive design with focus groups and individual interviews held in May 2014. Participants included managers and healthcare providers from eight TCAB units in a university health center in Quebec, Canada. The sample was composed of 43 individuals. The data were analyzed using NVivo according to the method proposed by Miles and Huberman. The first two themes that emerged from the analysis are related to context (organizational transition requiring many changes) and spread strategies for the TCAB program (senior management support, release time and facilitation, rotation of team members, learning from previous TCAB teams, and engaging patients). The last theme that emerged from the analysis is the impact on healthcare professionals (providing front-line staff and managers with the training they need to make changes, team leadership, and increasing receptivity to hearing patients' and families' needs and requests). This study describes the perspectives of managers and team members to provide a better understanding of how spread strategies can facilitate the successful implementation of the TCAB program in a Canadian healthcare organization. Spread strategies facilitate the implementation of changes to improve the quality and safety of care provided to patients. © 2015 Sigma Theta Tau International.

  9. Working Memory Strategies during Rational Number Magnitude Processing

    Science.gov (United States)

    Hurst, Michelle; Cordes, Sara

    2017-01-01

    Rational number understanding is a critical building block for success in more advanced mathematics; however, how rational number magnitudes are conceptualized is not fully understood. In the current study, we used a dual-task working memory (WM) interference paradigm to investigate the dominant type of strategy (i.e., requiring verbal WM…

  10. Authentic Leadership Strategies in Support of Mentoring Processes

    Science.gov (United States)

    Shapira-Lishchinsky, Orly; Levy-Gazenfrantz, Tania

    2015-01-01

    The aim of the study was to determine whether teacher-mentees perceive their mentors as authentic leaders and if so, how these perceptions affected their leadership strategies. The sample included 60 Israeli teacher-mentees from different school levels and different sectors, who volunteered to participate in the study. Semi-structured interviews…

  11. PROCESS OF INNOVATION IN PRODUCT LIFECYCLE MANAGEMENT BUSINESS STRATEGY

    OpenAIRE

    VALENTINA GECEVSKA; FRANC CUS; RADMIL POLENAKOVIC; PAOLO CHABERT

    2011-01-01

    This article proposes a scenario of Product Lifecycle Management (PLM), as a innovative business strategy based on the analysis of business drivers, industry requirements, limit of current solution, and recent state-of-the-art review in the domain related to PLM. Potential industrial impact of the developed PLM technology solutions is analyzed. It is hoped that the proposed PLM technology solutions will form the frontier basis for further research, development, and application of PLM systems ...

  12. A QUALITY OF STRATEGY PROCESS IN TELECOMMUNICATION COMPANIES – A CASE STUDY

    Directory of Open Access Journals (Sweden)

    Goran Markovic

    2014-12-01

    Full Text Available A telecommunication services have trend of fast growing in sence of market share, innovations, offer business support etc. One of its crucial aspects is quality of services because rising global competitivity. It is reason why is necessary to modify “classic” way of strategy development to quality strategy development using different offer approaches. In the paper we presented basic elements of approach designed to override difficulties of business strategy alignment to quality strategy in propose to make effective process of quality strategy development process.

  13. Dissecting antigen processing and presentation routes in dermal vaccination strategies

    NARCIS (Netherlands)

    Platteel, Anouk C M; Henri, Sandrine; Zaiss, Dietmar M; Sijts, Alice J A M

    2017-01-01

    The skin is an attractive site for vaccination due to its accessibility and presence of immune cells surveilling this barrier. However, knowledge of antigen processing and presentation upon dermal vaccination is sparse. In this study we determined antigen processing routes that lead to CD8(+) T cell

  14. Evaluating Fidelity to a Modified NIATx Process Improvement Strategy for Improving HIV Services in Correctional Facilities.

    Science.gov (United States)

    Pankow, Jennifer; Willett, Jennifer; Yang, Yang; Swan, Holly; Dembo, Richard; Burdon, William M; Patterson, Yvonne; Pearson, Frank S; Belenko, Steven; Frisman, Linda K

    2018-04-01

    In a study aimed at improving the quality of HIV services for inmates, an organizational process improvement strategy using change teams was tested in 14 correctional facilities in 8 US states and Puerto Rico. Data to examine fidelity to the process improvement strategy consisted of quantitative ratings of the structural and process components of the strategy and qualitative notes that explicate challenges in maintaining fidelity to the strategy. Fidelity challenges included (1) lack of communication and leadership within change teams, (2) instability in team membership, and (3) issues with data utilization in decision-making to implement improvements to services delivery.

  15. The match-mismatch model of emotion processing styles and emotion regulation strategies in fibromyalgia.

    NARCIS (Netherlands)

    Geenen, R.; Ooijen-van der Linden, L. van; Lumley, M.A.; Bijlsma, J.W.J.; Middendorp, H. van

    2012-01-01

    OBJECTIVE: Individuals differ in their style of processing emotions (e.g., experiencing affects intensely or being alexithymic) and their strategy of regulating emotions (e.g., expressing or reappraising). A match-mismatch model of emotion processing styles and emotion regulation strategies is

  16. Testing strategies for digital picture processing of industrial X-ray images

    International Nuclear Information System (INIS)

    Filbert, D.; Klatte, R.

    1986-01-01

    Digital picture processing for difficult inspection work in general involves long and complex processing and much computer time. An adequate testing strategy can considerably reduce the testing time, which is shown by the example of a strategy for automated radiographic testing of castings. (orig./HP) [de

  17. Tool path strategy and cutting process monitoring in intelligent machining

    Science.gov (United States)

    Chen, Ming; Wang, Chengdong; An, Qinglong; Ming, Weiwei

    2018-06-01

    Intelligent machining is a current focus in advanced manufacturing technology, and is characterized by high accuracy and efficiency. A central technology of intelligent machining—the cutting process online monitoring and optimization—is urgently needed for mass production. In this research, the cutting process online monitoring and optimization in jet engine impeller machining, cranio-maxillofacial surgery, and hydraulic servo valve deburring are introduced as examples of intelligent machining. Results show that intelligent tool path optimization and cutting process online monitoring are efficient techniques for improving the efficiency, quality, and reliability of machining.

  18. Parallel processes: using motivational interviewing as an implementation coaching strategy.

    Science.gov (United States)

    Hettema, Jennifer E; Ernst, Denise; Williams, Jessica Roberts; Miller, Kristin J

    2014-07-01

    In addition to its clinical efficacy as a communication style for strengthening motivation and commitment to change, motivational interviewing (MI) has been hypothesized to be a potential tool for facilitating evidence-based practice adoption decisions. This paper reports on the rationale and content of MI-based implementation coaching Webinars that, as part of a larger active dissemination strategy, were found to be more effective than passive dissemination strategies at promoting adoption decisions among behavioral health and health providers and administrators. The Motivational Interviewing Treatment Integrity scale (MITI 3.1.1) was used to rate coaching Webinars from 17 community behavioral health organizations and 17 community health centers. The MITI coding system was found to be applicable to the coaching Webinars, and raters achieved high levels of agreement on global and behavior count measurements of fidelity to MI. Results revealed that implementation coaches maintained fidelity to the MI model, exceeding competency benchmarks for almost all measures. Findings suggest that it is feasible to implement MI as a coaching tool.

  19. Systems analysis as a tool for optimal process strategy

    International Nuclear Information System (INIS)

    Ditterich, K.; Schneider, J.

    1975-09-01

    For the description and the optimal treatment of complex processes, the methods of Systems Analysis are used as the most promising approach in recent times. In general every process should be optimised with respect to reliability, safety, economy and environmental pollution. In this paper the complex relations between these general optimisation postulates are established in qualitative form. These general trend relations have to be quantified for every particular system studied in practice

  20. Intensity-modulated radiation therapy (IMRT) for locally advanced paranasal sinus tumors: incorporating clinical decisions in the optimization process

    International Nuclear Information System (INIS)

    Tsien, Christina; Eisbruch, Avraham; McShan, Daniel; Kessler, Marc; Marsh, Robin C.; Fraass, Benedick

    2003-01-01

    Purpose: Intensity-modulated radiotherapy (IMRT) plans require decisions about priorities and tradeoffs among competing goals. This study evaluates the incorporation of various clinical decisions into the optimization system, using locally advanced paranasal sinus tumors as a model. Methods and Materials: Thirteen patients with locally advanced paranasal sinus tumors were retrospectively replanned using inverse planning. Two clinical decisions were assumed: (1) Spare both optic pathways (OP), or (2) Spare only the contralateral OP. In each case, adequate tumor coverage (treated to 70 Gy in 35 fractions) was required. Two beamlet IMRT plans were thus developed for each patient using a class solution cost function. By altering one key variable at a time, different levels of risk of OP toxicity and planning target volume (PTV) compromise were compared in a systematic manner. The resulting clinical tradeoffs were analyzed using dosimetric criteria, tumor control probability (TCP), equivalent uniform dose (EUD), and normal tissue complication probability. Results: Plan comparisons representing the two clinical decisions (sparing both OP and sparing only the contralateral OP), with respect to minimum dose, TCP, V 95 , and EUD, demonstrated small, yet statistically significant, differences. However, when individual cases were analyzed further, significant PTV underdosage (>5%) was present in most cases for plans sparing both OP. In 6/13 cases (46%), PTV underdosage was between 5% and 15%, and in 3 cases (23%) was greater than 15%. By comparison, adequate PTV coverage was present in 8/13 cases (62%) for plans sparing only the contralateral OP. Mean target EUD comparisons between the two plans (including 9 cases where a clinical tradeoff between PTV coverage and OP sparing was required) were similar: 68.6 Gy and 69.1 Gy, respectively (p=0.02). Mean TCP values for those 9 cases were 56.5 vs. 61.7, respectively (p=0.006). Conclusions: In IMRT plans for paranasal sinus tumors

  1. Best practice strategies for validation of micro moulding process simulation

    DEFF Research Database (Denmark)

    Costa, Franco; Tosello, Guido; Whiteside, Ben

    2009-01-01

    are the optimization of the moulding process and of the tool using simulation techniques. Therefore, in polymer micro manufacturing technology, software simulation tools adapted from conventional injection moulding can provide useful assistance for the optimization of moulding tools, mould inserts, micro component...... are discussed. Recommendations regarding sampling rate, meshing quality, filling analysis methods (micro short shots, flow visualization) and machine geometry modelling are given on the basis of the comparison between simulated and experimental results within the two considered study cases.......Simulation programs in polymer micro replication technology are used for the same reasons as in conventional injection moulding. To avoid the risks of costly re-engineering, the moulding process is simulated before starting the actual manufacturing process. Important economic factors...

  2. Adsorption, Desorption, Surface Diffusion, Lattice Defect Formation, and Kink Incorporation Processes of Particles on Growth Interfaces of Colloidal Crystals with Attractive Interactions

    Directory of Open Access Journals (Sweden)

    Yoshihisa Suzuki

    2016-07-01

    Full Text Available Good model systems are required in order to understand crystal growth processes because, in many cases, precise incorporation processes of atoms or molecules cannot be visualized easily at the atomic or molecular level. Using a transmission-type optical microscope, we have successfully observed in situ adsorption, desorption, surface diffusion, lattice defect formation, and kink incorporation of particles on growth interfaces of colloidal crystals of polystyrene particles in aqueous sodium polyacrylate solutions. Precise surface transportation and kink incorporation processes of the particles into the colloidal crystals with attractive interactions were observed in situ at the particle level. In particular, contrary to the conventional expectations, the diffusion of particles along steps around a two-dimensional island of the growth interface was not the main route for kink incorporation. This is probably due to the number of bonds between adsorbed particles and particles in a crystal; the number exceeds the limit at which a particle easily exchanges its position to the adjacent one along the step. We also found novel desorption processes of particles from steps to terraces, attributing them to the assistance of attractive forces from additionally adsorbing particles to the particles on the steps.

  3. Strategies for Processing Semen from Subfertile Stallions for Cooled Transport.

    Science.gov (United States)

    Varner, Dickson D

    2016-12-01

    Subfertility can be a confusing term because some semen of good quality can have reduced fertility following cooled transport if the semen is processed in an improper manner. General procedures aimed at processing stallion semen for cooled transport are well described. An array of factors could exist in reduced fertility of cool-transported semen. This article focuses on centrifugation techniques that can be used to maximize sperm quality of stallions whose semen is intended for cooled transport. Clinical cases are also provided for practical application of techniques. Copyright © 2016 Elsevier Inc. All rights reserved.

  4. Strategies for Managing Conflict in the Collaboration Process.

    Science.gov (United States)

    Ivarie, Judith J.

    Approaches to managing conflict in the collaborative process are discussed, along with the need for collaboration in schools. Collaboration by teachers, administrators, parents, and others can help identify problems, consider relevant data, plan and implement interventions, and evaluate results. However, the knowledge, experience, and values of…

  5. Succeeding in process standardization: Explaining the fit with international management strategy

    DEFF Research Database (Denmark)

    Rahimi, Fatemeh; Møller, Charles; Hvam, Lars

    2016-01-01

    Purpose: The purpose of this paper is to explore the fit between process standardization and international management strategy of multinational corporations (MNCs) by assessing the compatibility between process standardization and corporate structural characteristics in terms of asset configuration...... and headquarters-subsidiary relationships. Design/methodology/approach: First, after a literature review on MNCs’ strategy and process standardization, the study suggests two propositions on the fit between corporate international management strategy and process standardization. Second, to empirically examine....../value: The study provides in-depth understanding of how the international management strategy and consequent structural characteristics of MNCs affects process standardization in the course of a global enterprise resource planning implementation. The study proposes conditions of fit for aligning process...

  6. North American Soil Degradation: Processes, Practices, and Mitigating Strategies

    Directory of Open Access Journals (Sweden)

    R. L. Baumhardt

    2015-03-01

    Full Text Available Soil can be degraded by several natural or human-mediated processes, including wind, water, or tillage erosion, and formation of undesirable physical, chemical, or biological properties due to industrialization or use of inappropriate farming practices. Soil degradation occurs whenever these processes supersede natural soil regeneration and, generally, reflects unsustainable resource management that is global in scope and compromises world food security. In North America, soil degradation preceded the catastrophic wind erosion associated with the dust bowl during the 1930s, but that event provided the impetus to improve management of soils degraded by both wind and water erosion. Chemical degradation due to site specific industrial processing and mine spoil contamination began to be addressed during the latter half of the 20th century primarily through point-source water quality concerns, but soil chemical degradation and contamination of surface and subsurface water due to on-farm non-point pesticide and nutrient management practices generally remains unresolved. Remediation or prevention of soil degradation requires integrated management solutions that, for agricultural soils, include using cover crops or crop residue management to reduce raindrop impact, maintain higher infiltration rates, increase soil water storage, and ultimately increase crop production. By increasing plant biomass, and potentially soil organic carbon (SOC concentrations, soil degradation can be mitigated by stabilizing soil aggregates, improving soil structure, enhancing air and water exchange, increasing nutrient cycling, and promoting greater soil biological activity.

  7. Bilingual processing strategies in a university level immersion program Bilingual processing strategies in a university level immersion program

    Directory of Open Access Journals (Sweden)

    Andrew D. Cohen

    2008-04-01

    Full Text Available It is likely that for some people, if not many, the use of one language or another for thinking while performing language tasks is not viewed by them as a matter of strategy selection or of strategizing. Rather, it is seen as a given. The fact is that for bilinguals and multilinguals — especially for those with at least minimal control of a second or third language, there is an element of choice involved in arriving at the language(s used to perform cognitive operations (Cook, 1994; Cohen, 1995. Furthermore, the very choice of language of thought may have significant implications for ultimate success at learning and using the target language in a given situation. Methods of second language teaching and learning are often predicated on the principle that learners need to think as much as possible in a language that they wish to learn. The intuitively-based assumption has been that the more thinking through the target language the better. It is likely that for some people, if not many, the use of one language or another for thinking while performing language tasks is not viewed by them as a matter of strategy selection or of strategizing. Rather, it is seen as a given. The fact is that for bilinguals and multilinguals — especially for those with at least minimal control of a second or third language, there is an element of choice involved in arriving at the language(s used to perform cognitive operations (Cook, 1994; Cohen, 1995. Furthermore, the very choice of language of thought may have significant implications for ultimate success at learning and using the target language in a given situation. Methods of second language teaching and learning are often predicated on the principle that learners need to think as much as possible in a language that they wish to learn. The intuitively-based assumption has been that the more thinking through the target language the better.

  8. 4D flow mri post-processing strategies for neuropathologies

    Science.gov (United States)

    Schrauben, Eric Mathew

    4D flow MRI allows for the measurement of a dynamic 3D velocity vector field. Blood flow velocities in large vascular territories can be qualitatively visualized with the added benefit of quantitative probing. Within cranial pathologies theorized to have vascular-based contributions or effects, 4D flow MRI provides a unique platform for comprehensive assessment of hemodynamic parameters. Targeted blood flow derived measurements, such as flow rate, pulsatility, retrograde flow, or wall shear stress may provide insight into the onset or characterization of more complex neuropathologies. Therefore, the thorough assessment of each parameter within the context of a given disease has important medical implications. Not surprisingly, the last decade has seen rapid growth in the use of 4D flow MRI. Data acquisition sequences are available to researchers on all major scanner platforms. However, the use has been limited mostly to small research trials. One major reason that has hindered the more widespread use and application in larger clinical trials is the complexity of the post-processing tasks and the lack of adequate tools for these tasks. Post-processing of 4D flow MRI must be semi-automated, fast, user-independent, robust, and reliably consistent for use in a clinical setting, within large patient studies, or across a multicenter trial. Development of proper post-processing methods coupled with systematic investigation in normal and patient populations pushes 4D flow MRI closer to clinical realization while elucidating potential underlying neuropathological origins. Within this framework, the work in this thesis assesses venous flow reproducibility and internal consistency in a healthy population. A preliminary analysis of venous flow parameters in healthy controls and multiple sclerosis patients is performed in a large study employing 4D flow MRI. These studies are performed in the context of the chronic cerebrospinal venous insufficiency hypothesis. Additionally, a

  9. Different strategies for recovering metals from CARON process residue

    International Nuclear Information System (INIS)

    Cabrera, G.; Gomez, J.M.; Hernandez, I.; Coto, O.; Cantero, D.

    2011-01-01

    The capacity of Acidithiobacillus thiooxidans DMS 11478 to recover the heavy metals contained in the residue obtained from the CARON process has been evaluated. Different bioreactor configurations were studied: a two-stage batch system and two semi-continuous systems (stirred-tank reactor leaching and column leaching). In the two-stage system, 46.8% Co, 36.0% Mg, 26.3% Mn and 22.3% Ni were solubilised after 6 h of contact between the residue and the bacteria-free bioacid. The results obtained with the stirred-tank reactor and the column were similar: 50% of the Mg and Co and 40% of the Mn and Ni were solubilised after thirty one days. The operation in the column reactor allowed the solid-liquid ratio to be increased and the pH to be kept at low values (<1.0). Recirculation of the leachate in the column had a positive effect on metal removal; at sixty five days (optimum time) the solubilisation levels were as follows: 86% Co, 83% Mg, 72% Mn and Ni, 62% Fe and 23% Cr. The results corroborate the feasibility of the systems studied for the leaching of metals from CARON process residue and these methodologies can be considered viable for the recovery of valuable metals.

  10. Tank waste remediation system optimized processing strategy with an altered treatment scheme

    International Nuclear Information System (INIS)

    Slaathaug, E.J.

    1996-03-01

    This report provides an alternative strategy evolved from the current Hanford Site Tank Waste Remediation System (TWRS) programmatic baseline for accomplishing the treatment and disposal of the Hanford Site tank wastes. This optimized processing strategy with an altered treatment scheme performs the major elements of the TWRS Program, but modifies the deployment of selected treatment technologies to reduce the program cost. The present program for development of waste retrieval, pretreatment, and vitrification technologies continues, but the optimized processing strategy reuses a single facility to accomplish the separations/low-activity waste (LAW) vitrification and the high-level waste (HLW) vitrification processes sequentially, thereby eliminating the need for a separate HLW vitrification facility

  11. Best practice strategies for validation of micro moulding process simulation

    DEFF Research Database (Denmark)

    Costa, Franco; Tosello, Guido; Whiteside, Ben

    2009-01-01

    The use of simulation for injection moulding design is a powerful tool which can be used up-front to avoid costly tooling modifications and reduce the number of mould trials. However, the accuracy of the simulation results depends on many component technologies and information, some of which can...... be easily controlled or known by the simulation analyst and others which are not easily known. For this reason, experimental validation studies are an important tool for establishing best practice methodologies for use during analysis set up on all future design projects. During the validation studies......, detailed information about the moulding process is gathered and used to establish these methodologies. Whereas in routine design projects, these methodologies are then relied on to provide efficient but reliable working practices. Data analysis and simulations on preliminary micro-moulding experiments have...

  12. Global optimization numerical strategies for rate-independent processes

    Czech Academy of Sciences Publication Activity Database

    Benešová, Barbora

    2011-01-01

    Roč. 50, č. 2 (2011), s. 197-220 ISSN 0925-5001 R&D Projects: GA ČR GAP201/10/0357 Grant - others:GA MŠk(CZ) LC06052 Program:LC Institutional research plan: CEZ:AV0Z20760514 Keywords : rate-independent processes * numerical global optimization * energy estimates based algorithm Subject RIV: BA - General Mathematics Impact factor: 1.196, year: 2011 http://math.hnue.edu.vn/portal/rss.viewpage.php?id=0000037780&ap=L3BvcnRhbC9ncmFiYmVyLnBocD9jYXRpZD0xMDEyJnBhZ2U9Mg==

  13. Sensory processing patterns, coping strategies, and quality of life among patients with unipolar and bipolar disorders

    Directory of Open Access Journals (Sweden)

    Batya Engel-Yeger

    2016-01-01

    Full Text Available Objective: To compare sensory processing, coping strategies, and quality of life (QoL in unipolar and bipolar patients; to examine correlations between sensory processing and QoL; and to investigate the relative contribution of sociodemographic characteristics, sensory processing, and coping strategies to the prediction of QoL. Methods: Two hundred sixty-seven participants, aged 16-85 years (53.6±15.7, of whom 157 had a diagnosis of unipolar major depressive disorder and 110 had bipolar disorder type I and type II, completed the Adolescent/Adult Sensory Profile, Coping Orientations to Problems Experienced, and 12-item Short-Form Health Survey version 2. The two groups were compared with multivariate analyses. Results: The unipolar and bipolar groups did not differ concerning sensory processing, coping strategies, or QoL. Sensory processing patterns correlated with QoL independently of mediation by coping strategies. Correlations between low registration, sensory sensitivity, sensation avoidance, and reduced QoL were found more frequently in unipolar patients than bipolar patients. Higher physical QoL was mainly predicted by lower age and lower sensory sensitivity, whereas higher mental QoL was mainly predicted by coping strategies. Conclusion: While age may predict physical QoL, coping strategies predict mental QoL. Future studies should further investigate the impact of sensory processing and coping strategies on patients’ QoL in order to enhance adaptive and functional behaviors related to affective disturbances.

  14. Process Approach to Formation of the Strategy of Innovation Development of Enterprises

    Directory of Open Access Journals (Sweden)

    Yukhymenko Vita V.

    2013-12-01

    Full Text Available The article considers the process of formation of the strategy of innovation development on the basis of the process approach. The author studies and identifies the most significant cause-effect interrelations between the factors that influence efficiency of the process of formation of the strategy of innovation development of enterprises and their consequences. The article offers a process approach to building the K. Ishikawa diagram based on empirical assessment of management of business processes at railway engineering enterprises. The author’s approach would help solving multiple problems of railway engineering and also could be used in other sectors of economy.

  15. A review of control strategies for manipulating the feed rate in fed-batch fermentation processes

    DEFF Research Database (Denmark)

    Mears, Lisa; Stocks, Stuart M.; Sin, Gürkan

    2017-01-01

    . This review covers a range of strategies which have been employed to use the feed rate as a manipulated variable in a control strategy. The feed rate is chosen as the focus for this review, as it is seen that this variable may be used towards many different objectives depending on the process of interest...

  16. Language Learning Strategies and English Proficiency: Interpretations from Information-Processing Theory

    Science.gov (United States)

    Rao, Zhenhui

    2016-01-01

    The research reported here investigated the relationship between students' use of language learning strategies and their English proficiency, and then interpreted the data from two models in information-processing theory. Results showed that the students' English proficiency significantly affected their use of learning strategies, with high-level…

  17. Psychometric Characteristics of the EEAA (Scale of Affective Strategies in the Learning Process)

    Science.gov (United States)

    Villardón-Gallego, Lourdes; Yániz, Concepción

    2014-01-01

    Introduction: Affective strategies for coping with affective states linked to the learning process may be oriented toward controlling emotions or toward controlling motivation. Both types affect performance, directly and indirectly. The objective of this research was to design an instrument for measuring the affective strategies used by university…

  18. New emissions targeting strategy for site utility of process industries

    International Nuclear Information System (INIS)

    Manesh, Mohamamd Hasan Khoshgoftar; Amidpour, Majid; Hamedi, Mohammad Hosein; Abadi, Sajad Khamis; Ghalami, Hooman

    2013-01-01

    A new procedure for environmental targeting of co-generation system is presented. The proposed method is based on the concepts of pinch technology for total site targeting of fuel, power, steam, environmental impacts and total annualized cost with considering emissions taxes. This approach provides a consistent, general procedure for determining mass flow rates and efficiencies of the applied turbines. This algorithm utilizes the relationship of entropy with enthalpy and isentropic efficiency. Also, the life cycle assessment (LCA) as a well-known tool for analyzing environmental impacts on a wide perspective with reference to a product system and the related environmental and economic impacts have been applied. In this regard, a damage-oriented impact analysis method based on Eco-indicator 99 and footprints analysis was considered. In addition, the present work demonstrates the effect of including both sensible and latent heating of steam in the extended Site Utility Grand Composite Curve (ESUGCC). It is shown that including sensible heating allows for better thermal matching between the processes. Furthermore, the other representation YSUGCC as the other form of Site Utility Grand Composite has been proposed. Two case studies were used to illustrate the usefulness of the new environmental targeting method

  19. Planning to Improvise? The Role of Reasoning in the Strategy Process: Evidence from Malaysia

    OpenAIRE

    Hughes, Paul; Hodgkinson, Ian R.; Arshad, Darwina; Hughes, Mathew; Leone, Vitor

    2017-01-01

    The file attached to this record is the author's final peer reviewed version. The Publisher's final version can be found by following the DOI link. Planning and improvisation are depicted as alternate decision-making orientations in the strategy process literature, executed by two parallel cognitive contexts: rational or intuitive, but can rationality and intuition be harmonised in the strategy process? Strategic managers may not have to choose to either plan or improvise, rather there is ...

  20. TRADE AND FOREIGN DIRECT INVESTMENT MANAGEMENT STRATEGIES FOR U.S. PROCESSED FOOD FIRMS IN CHINA

    OpenAIRE

    Marchant, Mary A.; Saghaian, Sayed H.; Vickner, Steven S.

    1999-01-01

    This research examines the relationship between U.S. foreign direct investment (FDI) and exports of processed foods to China and identifies management strategies to enhance U.S. competitiveness. Two-stage least-squares empirical econometric results from a simultaneous equation system indicate that there exists a strong complementary relationship between U.S exports and FDI into China. Therefore, the appropriate managerial strategy to access Chinese processed foods markets is to increase overa...

  1. Transformation Strategies between Block-Oriented and Graph-Oriented Process Modelling Languages

    DEFF Research Database (Denmark)

    Mendling, Jan; Lassen, Kristian Bisgaard; Zdun, Uwe

    2006-01-01

    Much recent research work discusses the transformation between different process modelling languages. This work, however, is mainly focussed on specific process modelling languages, and thus the general reusability of the applied transformation concepts is rather limited. In this paper, we aim...... to abstract from concrete transformation strategies by distinguishing two major paradigms for representing control flow in process modelling languages: block-oriented languages (such as BPEL and BPML) and graph-oriented languages (such as EPCs and YAWL). The contribution of this paper are generic strategies...... for transforming from block-oriented process languages to graph-oriented languages, and vice versa....

  2. SUPER LEARNING: PROPITIATORS STRATEGIES OF A PROCESS OF PICK UP OF KNOWLEDGE IN FORM ACCELERATED

    Directory of Open Access Journals (Sweden)

    Gilma Álamo Sánchez

    2007-11-01

    Full Text Available To analyze the strategies of reception of knowledge in quick form and the definition of derivative thought processes of the learning transpersonal, it implies the development of investigations that you/they allow to capture the meaning of the application of Superaprendizaje strategies. This way, the study is based in the neuroscience and in the pattern of the mental spheres for the interpretation of the metabolic activities of the neurons, propitiators of the recording of information, the conception of the brain triuno, model of multiple intelligence, spirituality, personality, cognitive processes, intuition, meditation, and Superaprendizaje strategies: breathing, relaxation, music, aroma, and communication assertive conscience, they conform learning transpersonal.

  3. What cognitive strategies do orangutans (Pongo pygmaeus) use to solve a trial-unique puzzle-tube task incorporating multiple obstacles?

    Science.gov (United States)

    Tecwyn, Emma C; Thorpe, Susannah K S; Chappell, Jackie

    2012-01-01

    Apparently sophisticated behaviour during problem-solving is often the product of simple underlying mechanisms, such as associative learning or the use of procedural rules. These and other more parsimonious explanations need to be eliminated before higher-level cognitive processes such as causal reasoning or planning can be inferred. We presented three Bornean orangutans with 64 trial-unique configurations of a puzzle-tube to investigate whether they were able to consider multiple obstacles in two alternative paths, and subsequently choose the correct direction in which to move a reward in order to retrieve it. We were particularly interested in how subjects attempted to solve the task, namely which behavioural strategies they could have been using, as this is how we may begin to elucidate the cognitive mechanisms underpinning their choices. To explore this, we simulated performance outcomes across the 64 trials for various procedural rules and rule combinations that subjects may have been using based on the configuration of different obstacles. Two of the three subjects solved the task, suggesting that they were able to consider at least some of the obstacles in the puzzle-tube before executing action to retrieve the reward. This is impressive compared with the past performances of great apes on similar, arguably less complex tasks. Successful subjects may have been using a heuristic rule combination based on what they deemed to be the most relevant cue (the configuration of the puzzle-tube ends), which may be a cognitively economical strategy.

  4. An empirical analysis of strategy implementation process and performance of construction companies

    Science.gov (United States)

    Zaidi, F. I.; Zawawi, E. M. A.; Nordin, R. M.; Ahnuar, E. M.

    2018-02-01

    Strategy implementation is known as action stage where it is to be considered as the most difficult stage in strategic planning. Strategy implementation can influence the whole texture of a company including its performance. The aim of this research is to provide the empirical relationship between strategy implementation process and performance of construction companies. This research establishes the strategy implementation process and how it influences the performance of construction companies. This research used quantitative method approached via questionnaire survey. Respondents were G7 construction companies in Klang Valley, Selangor. Pearson correlation analysis indicate a strong positive relationship between strategy implementation process and construction companies’ performance. The most importance part of strategy implementation process is to provide sufficient training for employees which directly influence the construction companies’ profit growth and employees’ growth. This research results will benefit top management in the construction companies to conduct strategy implementation in their companies. This research may not reflect the whole construction industry in Malaysia. Future research may be resumed to small and medium grades contractors and perhaps in other areas in Malaysia.

  5. A call for the need to incorporate enterprise risk management as part of the overall business model innovation process

    DEFF Research Database (Denmark)

    Taran, Yariv; Boer, Harry; Lindgren, Peter

    2009-01-01

    Relative to, for example, radical product innovation process, little isknown about business model innovation, let alone the process of managingthe risks involved in that process. Using the emerging Enterprise RiskManagement (ERM) literature, an approach is proposed through whichrisk management can...... be embedded in the business model innovationprocess. The integrated risk management/business model innovationprocess model has been tested through an action research study in aDanish company. The results are promising and warrant continuation ofthe development of that model....

  6. Behaviour analysis of uranium purification pilot plant taking into consideration the incorporation of a second column of extraction in the process flow chart

    International Nuclear Information System (INIS)

    Souza Barbosa, E.M. de.

    1979-01-01

    This work analyses the effect of the incorporation of a second column of extraction by solvents in pulsed plate columns in the Process of Uranium Purification. Operating with the aqueous phase of washing this second column of extraction recovers the dragged Uranium, increasing the efficiency of the process. The experiments were carried out in the display unit of Uranium purification in the Institute of Energetic and Nuclear Researches in Sao Paulo, where the dimension and the performance were studied with the following parameters: real increase in the efficiency and decontamination in the process. An efficiency superior to 98% in mass was obtained against 84,6% in the conventional process. With a performance similar to the first column of extract on the decontamination, about 99%, obtained in this column, maintained the grade of nuclear purity peculiar to the Process of Uranium Purification by solvents in pulsed plate columns. (author) [pt

  7. The process evaluation of two alternative participatory ergonomics intervention strategies for construction companies.

    Science.gov (United States)

    Visser, Steven; van der Molen, Henk F; Sluiter, Judith K; Frings-Dresen, Monique H W

    2018-03-26

    To gain insight into the process of applying two guidance strategies - face-to-face (F2F) or e-guidance strategy (EC) - of a Participatory Ergonomics (PE) intervention and whether differences between these guidance strategies occur, 12 construction companies were randomly assigned to a strategy. The process evaluation contained reach, dose delivered, dose received, precision, competence, satisfaction and behavioural change of individual workers. Data were assessed by logbooks, and questionnaires and interviews at baseline and/or after six months. Reach was low (1%). Dose delivered (F2F: 63%; EC: 44%), received (F2F: 42%; EC: 16%) were not sufficient. The precision and competence were sufficient for both strategies and satisfaction was strongly affected by dose received. For behavioural change, knowledge (F2F) and culture (EC) changed positively within companies. Neither strategy was delivered as intended. Compliance to the intervention was low, especially for EC. Starting with a face-to-face meeting might lead to higher compliance, especially in the EC group. Practitioner Summary: This study showed that compliance to a face-to-face and an e-guidance strategy is low. To improve the compliance, it is advised to start with a face-to-face meeting to see which parts of the intervention are needed and which guidance strategy can be used for these parts. ISRCTN73075751.

  8. Fabrication of highly nonlinear germano-silicate glass optical fiber incorporated with PbTe semiconductor quantum dots using atomization doping process and its optical nonlinearity.

    Science.gov (United States)

    Ju, Seongmin; Watekar, Pramod R; Han, Won-Taek

    2011-01-31

    Germano-silicate glass optical fiber incorporated with PbTe semiconductor quantum dots (SQDs) in the core was fabricated by using the atomization process in modified chemical vapor deposition (MCVD) process. The absorption bands attributed to PbTe semiconductor quantum dots in the fiber core were found to appear at around 687 nm and 1055 nm. The nonlinear refractive index measured by the long-period fiber grating (LPG) pair method upon pumping with laser diode at 976.4 nm was estimated to be ~1.5 × 10(-16) m2/W.

  9. Energy-Performance-Based Design-Build Process: Strategies for Procuring High-Performance Buildings on Typical Construction Budgets: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Scheib, J.; Pless, S.; Torcellini, P.

    2014-08-01

    NREL experienced a significant increase in employees and facilities on our 327-acre main campus in Golden, Colorado over the past five years. To support this growth, researchers developed and demonstrated a new building acquisition method that successfully integrates energy efficiency requirements into the design-build requests for proposals and contracts. We piloted this energy performance based design-build process with our first new construction project in 2008. We have since replicated and evolved the process for large office buildings, a smart grid research laboratory, a supercomputer, a parking structure, and a cafeteria. Each project incorporated aggressive efficiency strategies using contractual energy use requirements in the design-build contracts, all on typical construction budgets. We have found that when energy efficiency is a core project requirement as defined at the beginning of a project, innovative design-build teams can integrate the most cost effective and high performance efficiency strategies on typical construction budgets. When the design-build contract includes measurable energy requirements and is set up to incentivize design-build teams to focus on achieving high performance in actual operations, owners can now expect their facilities to perform. As NREL completed the new construction in 2013, we have documented our best practices in training materials and a how-to guide so that other owners and owner's representatives can replicate our successes and learn from our experiences in attaining market viable, world-class energy performance in the built environment.

  10. Due Process in Dual Process: Model-Recovery Simulations of Decision-Bound Strategy Analysis in Category Learning

    Science.gov (United States)

    Edmunds, Charlotte E. R.; Milton, Fraser; Wills, Andy J.

    2018-01-01

    Behavioral evidence for the COVIS dual-process model of category learning has been widely reported in over a hundred publications (Ashby & Valentin, 2016). It is generally accepted that the validity of such evidence depends on the accurate identification of individual participants' categorization strategies, a task that usually falls to…

  11. The Practice of Information Processing Model in the Teaching of Cognitive Strategies

    Science.gov (United States)

    Ozel, Ali

    2009-01-01

    In this research, the differentiation condition of teaching the learning strategies depending on the time which the first grade of primary school teachers carried out to form an information-process skeleton on student is tried to be found out. This process including the efforts of 260 teachers in this direction consists of whether the adequate…

  12. User-centric Query Refinement and Processing Using Granularity Based Strategies

    NARCIS (Netherlands)

    Zeng, Y.; Zhong, N.; Wang, Y.; Qin, Y.; Huang, Z.; Zhou, H; Yao, Y; van Harmelen, F.A.H.

    2011-01-01

    Under the context of large-scale scientific literatures, this paper provides a user-centric approach for refining and processing incomplete or vague query based on cognitive- and granularity-based strategies. From the viewpoints of user interests retention and granular information processing, we

  13. Methodological Strategies for Studying the Process of Learning, Memory and Visual Literacy.

    Science.gov (United States)

    Randhawa, Bikkar S.; Hunt, Dennis

    An attempt is made to discuss current models of information processing, learning, and development, thereby suggesting adequate methodological strategies for research in visual literacy. It is maintained that development is a cumulative process of learning, and that learning and memory are the result of new knowledge, sensations, etc. over a short…

  14. Talk as a Metacognitive Strategy during the Information Search Process of Adolescents

    Science.gov (United States)

    Bowler, Leanne

    2010-01-01

    Introduction: This paper describes a metacognitive strategy related to the social dimension of the information search process of adolescents. Method: A case study that used naturalistic methods to explore the metacognitive thinking nd associated emotions of ten adolescents. The study was framed by Kuhlthau's Information Search Process model and…

  15. The Impact of Metacognitive Strategies and Self-Regulating Processes of Solving Math Word Problems

    Science.gov (United States)

    Vula, Eda; Avdyli, Rrezarta; Berisha, Valbona; Saqipi, Blerim; Elezi, Shpetim

    2017-01-01

    This empirical study investigates the impact of metacognitive strategies and self-regulating processes in learners' achievement on solving math word problems. It specifically analyzes the impact of the linguistic factor and the number of steps and arithmetical operations that learners need to apply during the process of solving math word problems.…

  16. A retrofit strategy to achieve “Fast, Flexible, Future (F3)” pharmaceutical production processes

    DEFF Research Database (Denmark)

    Singh, Ravendra; Rozada-Sanchez, Raquel; Wrate, Tim

    2011-01-01

    n the work reported here, a substrates adoption methodology for a series of similar substrates has been developed as part of a retrofit strategy. The objective is to achieve “fast, flexible and future” pharmaceutical production processes by adapting a generic modular process-plant template...

  17. Evaluation of hydrologic equilibrium in a mountainous watershed: incorporating forest canopy spatial adjustment to soil biogeochemical processes

    Science.gov (United States)

    Mackay, D. Scott

    Hydrologic equilibrium theory has been used to describe both short-term regulation of gas exchange and long-term adjustment of forest canopy density. However, by focusing on water and atmospheric conditions alone a hydrologic equilibrium may impose an oversimplification of the growth of forests adjusted to hydrology. In this study nitrogen is incorporated as a third regulation of catchment level forest dynamics and gas exchange. This was examined with an integrated distributed hydrology and forest growth model in a central Sierra Nevada watershed covered primarily by old-growth coniferous forest. Water and atmospheric conditions reasonably reproduced daily latent heat flux, and predicted the expected catenary trend of leaf area index (LAI). However, it was not until the model was provided a spatially detailed description of initial soil carbon and nitrogen pools that spatial patterns of LAI were generated. This latter problem was attributed to a lack of soil history or memory in the initialization of the simulations. Finally, by reducing stomatal sensitivity to vapor pressure deficit (VPD) the canopy density increased when water and nitrogen limitations were not present. The results support a three-control hydrologic equilibrium in the Sierra Nevada watershed. This has implications for modeling catchment level soil-vegetation-atmospheric interactions over interannual, decade, and century time-scales.

  18. Application of the Taguchi Method for Optimizing the Process Parameters of Producing Lightweight Aggregates by Incorporating Tile Grinding Sludge with Reservoir Sediments.

    Science.gov (United States)

    Chen, How-Ji; Chang, Sheng-Nan; Tang, Chao-Wei

    2017-11-10

    This study aimed to apply the Taguchi optimization technique to determine the process conditions for producing synthetic lightweight aggregate (LWA) by incorporating tile grinding sludge powder with reservoir sediments. An orthogonal array L 16 (4⁵) was adopted, which consisted of five controllable four-level factors (i.e., sludge content, preheat temperature, preheat time, sintering temperature, and sintering time). Moreover, the analysis of variance method was used to explore the effects of the experimental factors on the particle density, water absorption, bloating ratio, and loss on ignition of the produced LWA. Overall, the produced aggregates had particle densities ranging from 0.43 to 2.1 g/cm³ and water absorption ranging from 0.6% to 13.4%. These values are comparable to the requirements for ordinary and high-performance LWAs. The results indicated that it is considerably feasible to produce high-performance LWA by incorporating tile grinding sludge with reservoir sediments.

  19. Marketing Strategy Implementation Process in the Creative Industry of Video Games

    Directory of Open Access Journals (Sweden)

    Maryangela Drumond de Abreu Negrão

    2013-06-01

    Full Text Available This article contributes to the understanding of marketing strategy process when it presents the organizational and human factors that support the processes of implementation, identified in a qualitative study conducted in the creative industry of video game development. The research, a case study applied to four video and computer game companies was based on the Sashittal and Jassawalla (2001 marketing strategic model, and on the concepts of the creative behavior and innovation in organizations proposed by Amabile (1997. The analysis suggests that the marketing strategy implementation is anchored in innovative administrative process, creative skills and the adoption of modern control technologies. It was observed that a vision that associates production, process, the market orientation and the delivery of value-adding is essential for the implementation of strategies in creative and innovative organizational structures. The research contributes to the marketing strategy implementation studies in creative and innovative environments under the approach of smaller organizations. It also contributes with the marketing strategy theory when it suggests that the analysis of the process, the control and the management skills be included as categories into the theoretical model in future investigations.

  20. Optimization strategies based on sequential quadratic programming applied for a fermentation process for butanol production.

    Science.gov (United States)

    Pinto Mariano, Adriano; Bastos Borba Costa, Caliane; de Franceschi de Angelis, Dejanira; Maugeri Filho, Francisco; Pires Atala, Daniel Ibraim; Wolf Maciel, Maria Regina; Maciel Filho, Rubens

    2009-11-01

    In this work, the mathematical optimization of a continuous flash fermentation process for the production of biobutanol was studied. The process consists of three interconnected units, as follows: fermentor, cell-retention system (tangential microfiltration), and vacuum flash vessel (responsible for the continuous recovery of butanol from the broth). The objective of the optimization was to maximize butanol productivity for a desired substrate conversion. Two strategies were compared for the optimization of the process. In one of them, the process was represented by a deterministic model with kinetic parameters determined experimentally and, in the other, by a statistical model obtained using the factorial design technique combined with simulation. For both strategies, the problem was written as a nonlinear programming problem and was solved with the sequential quadratic programming technique. The results showed that despite the very similar solutions obtained with both strategies, the problems found with the strategy using the deterministic model, such as lack of convergence and high computational time, make the use of the optimization strategy with the statistical model, which showed to be robust and fast, more suitable for the flash fermentation process, being recommended for real-time applications coupling optimization and control.

  1. DEMONSTRATION OF THE STRATEGY FORMATION PROCESS: A CASE STUDY IN A INNOVATIVE ORGANIZATION

    Directory of Open Access Journals (Sweden)

    Daniel Teodoro Gomes

    2012-05-01

    Full Text Available This paper presents a study of strategy formation process with the following starting question: "How the strategy is shaped in an innovative company and how the factors manifesting in the process?". The research builds on a case study of a company considered innovative leader in its industry and a pioneer in providing various services in the area of mobile phone in Brazil. Data collection was through interviews semi-structured with directors and managers involved in strategy formation, supplemented by documents and direct observation. Data analysis is based on the techniques of discourse analysis, from the persuasion strategies suggested by Linhares and Faria (1993. The company's strategy studied can be defined as an entrepreneurial vision, focused on growth supported by a process of diversification of product lines from a new direction composed of three elements: (i componentization; (ii segmentation by products chain and; (iii external to finance leverage in order to resumption of innovative projects. It was concluded that the company's strategy focused on these three factors, supported by a deliberate vision of the future, conditions its historical trajectory type standard cultural, its core values, which acts as a motivator and guide for members of the organization decisions and actions.

  2. Enhancing the informed consent process for critical care research: strategies from a thromboprophylaxis trial.

    Science.gov (United States)

    Smith, Orla M; McDonald, Ellen; Zytaruk, Nicole; Foster, Denise; Matte, Andrea; Clarke, France; Fleury, Suzie; Krause, Katie; McArdle, Tracey; Skrobik, Yoanna; Cook, Deborah J

    2013-12-01

    Critically ill patients lack capacity for decisions about research participation. Consent to enrol these patients in studies is typically obtained from substitute decision-makers. To present strategies that may optimise the process of obtaining informed consent from substitute decision-makers for participation of critically ill patients in trials. We use examples from a randomised trial of heparin thromboprophylaxis in the intensive care unit (PROTECT, clinicaltrials.gov NCT00182143). 3764 patients were randomised, with an informed consent rate of 82%; 90% of consents were obtained from substitute decision-makers. North American PROTECT research coordinators attended three meetings to discuss enrolment: (1) Trial start-up (January 2006); (2) Near trial closure (January 2010); and (3) Post-publication (April 2011). Data were derived from slide presentations, field notes from break-out groups and plenary discussions, then analysed inductively. We derived three phases for the informed consent process: (1) Preparation for the Consent Encounter; (2) The Consent Encounter; and (3) Follow-up to the Consent Encounter. Specific strategies emerged for each phase: Phase 1 (four strategies); Phase 2 (six strategies); and Phase 3 (three strategies). We identified 13 strategies that may improve the process of obtaining informed consent from substitute decision-makers and be generalisable to other settings and studies. Copyright © 2013 The Authors. Published by Elsevier Ltd.. All rights reserved.

  3. A large-scale forest landscape model incorporating multi-scale processes and utilizing forest inventory data

    Science.gov (United States)

    Wen J. Wang; Hong S. He; Martin A. Spetich; Stephen R. Shifley; Frank R. Thompson III; David R. Larsen; Jacob S. Fraser; Jian. Yang

    2013-01-01

    Two challenges confronting forest landscape models (FLMs) are how to simulate fine, standscale processes while making large-scale (i.e., .107 ha) simulation possible, and how to take advantage of extensive forest inventory data such as U.S. Forest Inventory and Analysis (FIA) data to initialize and constrain model parameters. We present the LANDIS PRO model that...

  4. Photonic Ultra-Wideband 781.25-Mb/s Signal Generation and Transmission Incorporating Digital Signal Processing Detection

    DEFF Research Database (Denmark)

    Gibbon, Timothy Braidwood; Yu, Xianbin; Tafur Monroy, Idelfonso

    2009-01-01

    The generation of photonic ultra-wideband (UWB) impulse signals using an uncooled distributed-feedback laser is proposed. For the first time, we experimentally demonstrate bit-for-bit digital signal processing (DSP) bit-error-rate measurements for transmission of a 781.25-Mb/s photonic UWB signal...

  5. Strategy for research on radioactive waste processing and conditioning in France

    International Nuclear Information System (INIS)

    Cavedon, J.M.; Tallec, M.

    2001-01-01

    Research on radioactive medium level waste processing and conditioning aims at offering processing routes for waste forms and materials of potential value that are not yet provided easy handling by existing industrial processes. These studies are mandatory under the Dec 31, 1991 law and are coordinated by CEA. The strategy relies on the completion and rationalization of the existing processing routes, within acceptable technical and economic limits. Waste processing techniques aim at reducing the volume and the chemical diversity of medium activity waste, and are based on incineration-vitrification. Conditioning techniques call for high performance matrices and standardized containers, the latter keeping an ability to contain bulk waste. (author)

  6. Business Strategy Formulation By Shareholders and Company Management using The Analytical Network Process (ANPBusiness Strategy Formulation by Shareholders and Company Management Using Analytical Network Process (ANP

    Directory of Open Access Journals (Sweden)

    Faizal Faizal

    2016-11-01

    Full Text Available This research aimed to identify the business strategy formulation by the shareholders and the management of the company. Ten companies were selected to be the objects of this research. Those companies were the information technology, telecommunication, printing, mining, construction and chemical companies in Indonesia. The research was conducted by using the Analytical Network Process (ANP and considering the chosen respondents as the decision makers (experts of those companies. The respondents were chosen by using the non-probabilitty sampling method. The result shows that the roles of the company managements are considered m ore influental (0,57143 than the roles of the shareholders (0,28571. From the output of stakeholder’s condition, the best-stratified priority strategies are differentiation (0,600515, cost of leadership (0,230754 and focus (0,168731.

  7. Incorporating consideration of health impacts into land use development approval processes: Development of a Health Background Study Framework.

    Science.gov (United States)

    Moloughney, Brent W; Bursey, Gayle E; Neumann, Jana; Leeming, Daniel H; Gutmann, Christine E; Sivanand, Bhavna; Mowat, David L

    2014-09-12

    This project involved development of a Health Background Study (HBS) Framework to support consideration of health impacts within municipalities' approval process for land use development. Peel Public Health and Toronto Public Health led the project with the participation of planners, urban designers, engineers, public health staff and development industry representatives. Historical growth in the Region of Peel and suburban Toronto has resulted in extensive low-density development, creating car-dependent communities with disconnected streets and segregated land uses. The inclusion of an HBS in developers' applications to municipalities is one approach by which health-related expectations for the built environment can be established within the approval process. Development of the HBS Framework used the six core elements of the built environment with the strongest evidence for impact on health and was informed by analysis of the provincial and local policy contexts, practices of other municipalities and stakeholder interviews. The Framework's contents were refined according to feedback from multidisciplinary stakeholder workshops. The HBS Framework identifies minimum standards for built environment core elements that developers need to address in their applications. The Framework was created to be simple and instructive with applicability to a range of development locations and scales, and to various stages of the development approval process. Peel Public Health is leading several initiatives to support the use of the HBS as a part of the development application process. The HBS Framework is a tool that public health and planning can use to support the consideration of health impacts within municipalities' land use development processes.

  8. Incorporating Geodectic Processing Modules into a Real-Time Earthworm Environment to Enhance NOAA's Tsunami Warning Capability

    Science.gov (United States)

    Macpherson, K. A.

    2017-12-01

    The National Oceanographic and Atmospheric Administration's National and Pacific Tsunami Warning Centers currently rely on traditional seismic data in order to detect and evaluate potential tsunamigenic earthquakes anywhere on the globe. The first information products disseminated by the centers following a significant seismic event are based solely on seismically-derived earthquake locations and magnitudes, and are issued within minutes of the earthquake origin time. Thus, the rapid and reliable determination of the earthquake magnitude is a critical piece of information needed by the centers to generate the appropriate alert levels. However, seismically-derived magnitudes of large events are plagued by well-known problems, particularly during the first few minutes following the origin time; near-source broad-band instruments may go off scale, and magnitudes tend to saturate until sufficient teleseismic data arrive to represent the long-period signal that characterizes large events. However, geodetic data such as high-rate Global Positioning System (hGPS) displacements and seismogeodetic data that is a combination of collocated hGPS and accelerometer data do not suffer from these limitations. These sensors stay on scale, even for large events, and they record both dynamic and static displacements that may be used to estimate magnitude without saturation. Therefore, there is an ongoing effort to incorporate these data streams into the operations of the tsunami warning centers to enhance current magnitude determination capabilities, and eventually, to invert the geodetic displacements for mechanism and finite-fault information. These later quantities will be useful for tsunami modeling and forecasting. The tsunami warning centers rely on the Earthworm system for real-time data acquisition, so we have developed Earthworm modules for the Magnitude from Peak Ground Displacement (MPGD) algorithm, developed at the University of Washington and the University of California

  9. A methodology for the sustainable design and implementation strategy of CO2 utilization processes

    DEFF Research Database (Denmark)

    Roh, Kosan; Frauzem, Rebecca; Nguyen, Tuan B. H.

    2016-01-01

    design and analysis is discussed as only limited amounts of process data is available for determining the optimal processing path and in the third stage the issue of implementation strategy is considered. As examples, two CO2 utilization methods for methanol production, combined reforming and direct...... synthesis are considered. Methanol plants employing such methods are developed using synthesis-design and simulation tools and their evaluation indicators are calculated under various implementation strategies. It is demonstrated that integrating or replacing an existing conventional methanol plant...

  10. Incorporating psychoeducation, mindfulness and self-compassion in a new programme for binge eating (BEfree): Exploring processes of change.

    Science.gov (United States)

    Pinto-Gouveia, José; Carvalho, Sérgio A; Palmeira, Lara; Castilho, Paula; Duarte, Cristiana; Ferreira, Cláudia; Duarte, Joana; Cunha, Marina; Matos, Marcela; Costa, Joana

    2016-11-01

    This study explores the efficacy of BEfree, a 12-session group intervention that integrates psychoeducation, mindfulness, compassion and value-based action, in a sample of overweight and obese women with binge eating disorder ( N = 31). We used repeated measures analyses of variance and explored processes of change in binge eating and eating psychopathology. At post-intervention, participants decreased in binge eating severity, eating psychopathology, external shame, self-criticism, psychological inflexibility, body image cognitive fusion and increased self-compassion and engagement with valued actions. These results were maintained at 3- and 6-month follow-up. The changes in binge eating were mediated by the changes in the psychological processes promoted by BEfree.

  11. Incorporating Ecosystem Experiments and Observations into Process Models of Forest Carbon and Water Cycles: Challenges and Solutions

    Science.gov (United States)

    Ward, E. J.; Thomas, R. Q.; Sun, G.; McNulty, S. G.; Domec, J. C.; Noormets, A.; King, J. S.

    2015-12-01

    Numerous studies, both experimental and observational, have been conducted over the past two decades in an attempt to understand how water and carbon cycling in terrestrial ecosystems may respond to changes in climatic conditions. These studies have produced a wealth of detailed data on key processes driving these cycles. In parallel, sophisticated models of these processes have been formulated to answer a variety of questions relevant to natural resource management. Recent advances in data assimilation techniques offer exciting new possibilities to combine this wealth of ecosystem data with process models of ecosystem function to improve prediction and quantify associated uncertainty. Using forests of the southeastern United States as our focus, we will specify how fine-scale physiological (e.g. half-hourly sap flux) can be scaled up with quantified error for use in models of stand growth and hydrology. This approach represents an opportunity to leverage current and past research from experiments including throughfall displacement × fertilization (PINEMAP), irrigation × fertilization (SETRES), elevated CO­2­ (Duke and ORNL FACE) and a variety of observational studies in both conifer and hardwood forests throughout the region, using a common platform for data assimilation and prediction. As part of this discussion, we will address variation in dominant species, stand structure, site age, management practices, soils and climate that represent both challenges to the development of a common analytical approach and opportunities to address questions of interest to policy makers and natural resource managers.

  12. α″ Martensite and Amorphous Phase Transformation Mechanism in TiNbTaZr Alloy Incorporated with TiO2 Particles During Friction Stir Processing

    Science.gov (United States)

    Ran, Ruoshi; Liu, Yiwei; Wang, Liqiang; Lu, Eryi; Xie, Lechun; Lu, Weijie; Wang, Kuaishe; Zhang, Lai-Chang

    2018-06-01

    This work studied the formation of the α″ martensite and amorphous phases of TiNbTaZr alloy incorporated with TiO2 particles during friction stir processing. Formation of the amorphous phase in the top surface mainly results from the dissolution of oxygen, rearrangement of the lattice structure, and dislocations. High-stress stemming caused by dislocations and high-stress concentrations at crystal-amorphous interfaces promote the formation of α″ martensite. Meanwhile, an α″ martensitic transformation is hindered by oxygen diffusion from TiO2 to the matrix, thereby increasing resistance to shear.

  13. MATERIALS AND MEANS FOR THE INCORPORATION OF THE ENVIRONMENTAL EDUCATION FOR THE SUSTAINABLE DEVELOPMENT TO THE PEDAGOGIC PROCESS OF THE SCHOOLS IN THE VILLA CLARA´S CUBA

    Directory of Open Access Journals (Sweden)

    Mavel Moré Estupiñán

    2015-06-01

    Full Text Available The incorporation of the educational environmental for the sustainable development to pedagogic process constitutes a challenge for the educational systems at XXI century. This study pretent to show, in the de Villa Clara´s Cuba.  We asume as  theorist  and methodologic basics the research-action-participation and the  experiences systematization, it is elaborated a group of materials and means. These scientific results are introduced in selected educational institutions of the county, with positive impacts in the Environmental Education for the Sustainable Development of children, adolescents and youths and in the environmental formation of the professionals of the education.

  14. INCORPORATION OF HUMAN FACTORS ENGINEERING ANALYSES AND TOOLS INTO THE DESIGN PROCESS FOR DIGITAL CONTROL ROOM UPGRADES

    International Nuclear Information System (INIS)

    O'HARA, J.M.; BROWN, W.

    2004-01-01

    Many nuclear power plants are modernizing with digital instrumentation and control systems and computer-based human-system interfaces (HSIs). The purpose of this paper is to summarize the human factors engineering (HFE) activities that can help to ensure that the design meets personnel needs. HFE activities should be integrated into the design process as a regular part of the engineering effort of a plant modification. The HFE activities will help ensure that human performance issues are addressed, that new technology supports task performance, and that the HSIs are designed in a manner that is compatible with human physiological, cognitive and social characteristics

  15. Measurements of Rationality: Individual Differences in Information Processing, the Transitivity of Preferences and Decision Strategies.

    Science.gov (United States)

    Sleboda, Patrycja; Sokolowska, Joanna

    2017-01-01

    The first goal of this study was to validate the Rational-Experiential Inventory ( REI ) and the Cognitive Reflection Test ( CRT ) through checking their relation to the transitivity axiom. The second goal was to test the relation between decision strategies and cognitive style as well as the relation between decision strategies and the transitivity of preferences. The following characteristics of strategies were investigated: requirements for trade-offs, maximization vs. satisficing and option-wise vs. attribute-wise information processing. Respondents were given choices between two multi-attribute options. The options were designed so that the choice indicated which strategy was applied. Both the REI-R and the CRT were found to be good predictors of the transitivity of preferences. Respondents who applied compensatory strategies and the maximization criterion scored highly on the REI-R and in the CRT , whereas those who applied the satisficing rule scored highly on the REI-R but not in the CRT . Attribute-wise information processing was related to low scores in both measurements. Option-wise information processing led to a high transitivity of preferences.

  16. Modeling of optimization strategies in the incremental CNC sheet metal forming process

    International Nuclear Information System (INIS)

    Bambach, M.; Hirt, G.; Ames, J.

    2004-01-01

    Incremental CNC sheet forming (ISF) is a relatively new sheet metal forming process for small batch production and prototyping. In ISF, a blank is shaped by the CNC movements of a simple tool in combination with a simplified die. The standard forming strategies in ISF entail two major drawbacks: (i) the inherent forming kinematics set limits on the maximum wall angle that can be formed with ISF. (ii) since elastic parts of the imposed deformation can currently not be accounted for in CNC code generation, the standard strategies can lead to undesired deviations between the target and the sample geometry.Several enhancements have recently been put forward to overcome the above limitations, among them a multistage forming strategy to manufacture steep flanges, and a correction algorithm to improve the geometric accuracy. Both strategies have been successful in improving the forming of simple parts. However, the high experimental effort to empirically optimize the tool paths motivates the use of process modeling techniques.This paper deals with finite element modeling of the ISF process. In particular, the outcome of different multistage strategies is modeled and compared to collated experimental results regarding aspects such as sheet thickness and the onset of wrinkling. Moreover, the feasibility of modeling the geometry of a part is investigated as this is of major importance with respect to optimizing the geometric accuracy. Experimental validation is achieved by optical deformation measurement that gives the local displacements and strains of the sheet during forming as benchmark quantities for the simulation

  17. Appropriate teaching and learning strategies for the architectural design process in pedagogic design studios

    Directory of Open Access Journals (Sweden)

    Ashraf M. Soliman

    2017-06-01

    Full Text Available The national qualification framework of a country requires a certain level of knowledge and complexity of skills for an academic degree to be recognized. For architectural programs, student workload is heavy on design courses. Therefore, each course must be carefully developed to ensure that students are not overloaded. Teaching and learning strategies have different implications for courses, which occasionally result in overloading the students. This research aims to study the three main pillars of teaching and learning strategies for each design phase in pedagogic design studios. The most appropriate model for each teaching and learning strategy, including a set of the three main pillars, is then identified for each design phase. A practical strategy for managing design studios is also determined. The aforementioned three pillars are as follows: teaching and learning methods, assigned tasks or study aspects, and design communication techniques. Two research methods, namely, a literature review and a survey among design educators, are adopted. The literature review examines aspects that contribute to the design process and its phases, teaching methods, design skills, communication methods, and studio management strategies. On the basis of the literature review, the background of developments and practices in the design education process are used as constructive tools to develop the survey for design educators. Through the survey, the pillars of teaching and learning strategies that are frequently practiced in design studios are evaluated. Results of this study are classified into three ranks using the nature break classification method for numerical values. Subsequently, three priority models that correspond to teaching and learning strategies, as well as to the required skills and capabilities, are established. A group-based strategy with an interdisciplinary approach is also determined to be the most suitable technique for managing the

  18. Strategy for 90% autoverification of clinical chemistry and immunoassay test results using six sigma process improvement.

    Science.gov (United States)

    Randell, Edward W; Short, Garry; Lee, Natasha; Beresford, Allison; Spencer, Margaret; Kennell, Marina; Moores, Zoë; Parry, David

    2018-06-01

    Six Sigma involves a structured process improvement strategy that places processes on a pathway to continued improvement. The data presented here summarizes a project that took three clinical laboratories from autoverification processes that allowed between about 40% to 60% of tests being auto-verified to more than 90% of tests and samples auto-verified. The project schedule, metrics and targets, a description of the previous system and detailed information on the changes made to achieve greater than 90% auto-verification is presented for this Six Sigma DMAIC (Design, Measure, Analyze, Improve, Control) process improvement project.

  19. ICH guidelines--implementation of the 3Rs (refinement, reduction, and replacement): incorporating best scientific practices into the regulatory process.

    Science.gov (United States)

    Ohno, Yasuo

    2002-01-01

    An overview of the International Conference on Harmonization of Technical Requirements for Registration of Pharmaceuticals for Human Use (ICH) is described. ICH was established through cooperation of the regulatory agencies and industrial parties of three main regions involved in pharmaceuticals: the European Union, the United States, and Japan. The purpose of the ICH is to make recommendations to achieve greater harmonization regarding interpretation and application of technical guidelines and requirements for product registration in an effort to reduce or obviate the need to duplicate the testing carried out during the research and development of new medicines. The main purpose of ICH was not to foster the 3Rs per se; however, harmonization of guidelines has eliminated duplications of similar tests to satisfy the specific requirements of each region. The ICH process has contributed to mutual understanding of the regulatory requirements and has decreased the number of unnecessary animal experiments. Specific examples of the contributions of ICH harmonization to the 3Rs are described.

  20. Incorporation of high-level wastes in SYNROC: results from recent process-engineering studies at Lawrence Livermore National Laboratory

    International Nuclear Information System (INIS)

    Campbell, J.H.; Hoenig, C.L.; Ackerman, F.J.; Peters, P.E.; Grens, J.Z.

    1982-01-01

    In this paper, highlights from recent engineering research and development, in particular, results from fluidized bed calcination studies of SYNROC slurry are summarized. A schematic diagram of the envisioned SYNROC process (at this stage of development) is also presented. It shows the use of a fluidized bed calciner to prepare SYNROC powder that is then fed to a storage hopper. Bellows-type canisters are filled, evacuated, sealed and preheated. The preheated canisters are loaded into a hot isotactic pressing unit where they are densified, then removed and cooled and finally loaded into a waste storage container. After sealing, this container is decontaminated and transferred to the interim storage facility and then, ultimately, to an underground repository

  1. The impact of metacognitive strategies and self-regulating processes of solving math word problems

    OpenAIRE

    Eda Vula; Rrezarta Avdyli; Valbona Berisha; Blerim Saqipi; Shpetim Elezi

    2017-01-01

    This empirical study investigates the impact of metacognitive strategies and self-regulating processes in learners’ achievement on solving math word problems. It specifically analyzes the impact of the linguistic factor and the number of steps and arithmetical operations that learners need to apply during the process of solving math word problems. Two hundred sixty-three learners, of three classes of third graders (N=130) and four classes of fifth ...

  2. Conceptual versus Perceptual Text Processing Strategies: Differences between Good and Poor Readers.

    Science.gov (United States)

    Shepard, Charlene R.; Reynolds, Ralph E.

    Investigating the selective attention strategy, a study examined the type of attention allocated to important information by good and poor readers. Also tested was the methodological validity of using a conceptual (word recognition) perceptual (tachistoscopic word flash) task as a means of investigating the types of information processing that may…

  3. Exploring the Listening Process to Inform the Development of Strategy Awareness-Raising Materials

    Science.gov (United States)

    Blanco, Maria; Guisado, Juan J.

    2012-01-01

    This article reports on a small-scale qualitative study aimed at exploring the listening process in a group of Spanish beginners in a UK higher education context. The specific aim of the study was to inform the development of materials for listening strategy awareness-raising activities. The exploration was focused on identifying (a) strategies…

  4. The Effect of Context on the EFL Learners' Idiom Processing Strategies

    Science.gov (United States)

    Rohani, Gholamreza; Ketabi, Saeed; Tavakoli, Mansoor

    2012-01-01

    The present study investigated the effect of context on the strategies the EFL learners utilized to process idioms. To do so, ten Iranian intermediate EFL learners were randomly assigned to two groups who then attended a think-aloud session. The 5 subjects in the first group were exposed to an animated cartoon including 23 unfamiliar idioms while…

  5. Nutritional impact of sodium reduction strategies on sodium intake from processed foods

    NARCIS (Netherlands)

    Hendriksen, M.A.H.; Verkaik-Kloosterman, J.; Noort, M.W.; Raaij, J.M.A. van

    2015-01-01

    Background/objectives: Sodium intake in the Netherlands is substantially above the recommended intake of 2400 mg/day. This study aimed to estimate the effect of two sodium reduction strategies, that is, modification of the composition of industrially processed foods toward the technologically

  6. Nutritional impact of sodium reduction strategies on sodium intake from processed foods

    NARCIS (Netherlands)

    Hendriksen, M.A.H.; Verkaik-Kloosterman, J.; Noort, M.W.J.; Raaij, van J.M.A.

    2015-01-01

    Background/objectives: Sodium intake in the Netherlands is substantially above the recommended intake of 2400¿mg/day. This study aimed to estimate the effect of two sodium reduction strategies, that is, modification of the composition of industrially processed foods toward the technologically

  7. Interdisciplinary and Intercultural Differences in Learning Strategy Use: Implications for Language Processing, Curriculum and Instruction

    Science.gov (United States)

    Shawer, Saad F.

    2012-01-01

    This investigation examines English as foreign language college interdisciplinary and intercultural differences in learning strategy use and their implications for language processing. Positivism underpins this research at the levels of ontology (standardized variables), epistemology (detachment from the subjects) and methodology, using nomothetic…

  8. The Therapy Process Observational Coding System for Child Psychotherapy Strategies Scale

    Science.gov (United States)

    McLeod, Bryce D.; Weisz, John R.

    2010-01-01

    Most everyday child and adolescent psychotherapy does not follow manuals that document the procedures. Consequently, usual clinical care has remained poorly understood and rarely studied. The Therapy Process Observational Coding System for Child Psychotherapy-Strategies scale (TPOCS-S) is an observational measure of youth psychotherapy procedures…

  9. Strategies for Developing Positive Behaviour Management. Teacher Behaviour Outcomes and Attitudes to the Change Process

    Science.gov (United States)

    Hayes, Ben; Hindle, Sarah; Withington, Paul

    2007-01-01

    This paper describes an extended action research project run in a large secondary school over an 18-month period. The work was part of a wider strategy for change within the school. The data presented here describes some of the features of the change process and reflections on its impact. A key aim was to challenge and enable teachers to modify…

  10. Exploring Students' Reflective Thinking Practice, Deep Processing Strategies, Effort, and Achievement Goal Orientations

    Science.gov (United States)

    Phan, Huy Phuong

    2009-01-01

    Recent research indicates that study processing strategies, effort, reflective thinking practice, and achievement goals are important factors contributing to the prediction of students' academic success. Very few studies have combined these theoretical orientations within one conceptual model. This study tested a conceptual model that included, in…

  11. New contexts, new processes, new strategies: the co-construction of meaning in plurilingual interactions

    Directory of Open Access Journals (Sweden)

    Filomena Capucho

    2016-11-01

    In this paper, we will present the analysis of an extract from the Bucharest-Cinco corpus that will allow us to identify the strategies developed in the process of co-construction of meaning in multilingual contexts through a close examination of verbal and non-verbal features.

  12. [Use of health technology assessment in decision-making processes by the Brazilian Ministry of Health on the incorporation of technologies in the Brazilian Unified National Health System].

    Science.gov (United States)

    Novaes, Hillegonda Maria Dutilh; Elias, Flávia Tavares Silva

    2013-11-01

    Policies for scientific development and knowledge production in health have increased in recent decades. In Brazil, incentives for research, development, and innovation have been part of the National Health Act since 1990, and science and technology policies for health, including health technology assessment (HTA), have been implemented since 1994, as in many other countries. The emphasis is now on impact evaluation of HTA policies in the incorporation of technologies by health services and systems. The article presents a case study of HTA utilization in decision-making processes in the Brazilian Ministry of Health, analyzing participation by the Department of Science and Technology (DECIT), responsible for the production of assessments used in the Commission on Technology Incorporation (CITEC) of the Ministry of Health from 2008 to 2010. CITEC used 103 assessments in its decisions during this period, of which DECIT produced 80%. Nearly all were literature reviews on therapeutic technologies. An increase in knowledge production was observed. A methodological and political learning process appears to have occurred in the use of HTA, but its impact on Brazilian Unified National Health System remains unclear.

  13. Feedback providing improvement strategies and reflection on feedback use: Effects on students' writing motivation, process, and performance

    NARCIS (Netherlands)

    Duijnhouwer, H.; Prins, F.J.; Stokking, K.M.

    2012-01-01

    This study investigated the effects of feedback providing improvement strategies and a reflection assignment on students’ writing motivation, process, and performance. Students in the experimental feedback condition (n = 41) received feedback including improvement strategies, whereas students in the

  14. [Feedforward control strategy and its application in quality improvement of ethanol precipitation process of danhong injection].

    Science.gov (United States)

    Yan, Bin-Jun; Guo, Zheng-Tai; Qu, Hai-Bin; Zhao, Bu-Chang; Zhao, Tao

    2013-06-01

    In this work, a feedforward control strategy basing on the concept of quality by design was established for the manufacturing process of traditional Chinese medicine to reduce the impact of the quality variation of raw materials on drug. In the research, the ethanol precipitation process of Danhong injection was taken as an application case of the method established. Box-Behnken design of experiments was conducted. Mathematical models relating the attributes of the concentrate, the process parameters and the quality of the supernatants produced were established. Then an optimization model for calculating the best process parameters basing on the attributes of the concentrate was built. The quality of the supernatants produced by ethanol precipitation with optimized and non-optimized process parameters were compared. The results showed that using the feedforward control strategy for process parameters optimization can control the quality of the supernatants effectively. The feedforward control strategy proposed can enhance the batch-to-batch consistency of the supernatants produced by ethanol precipitation.

  15. Fixation of strategies with the Moran and Fermi processes in evolutionary games

    Science.gov (United States)

    Liu, Xuesong; He, Mingfeng; Kang, Yibin; Pan, Qiuhui

    2017-10-01

    A model of stochastic evolutionary game dynamics with finite population was built. It combines the standard Moran and Fermi rules with two strategies cooperation and defection. We obtain the expressions of fixation probabilities and fixation times. The one-third rule which has been found in the frequency dependent Moran process also holds for our model. We obtain the conditions of strategy being an evolutionarily stable strategy in our model, and then make a comparison with the standard Moran process. Besides, the analytical results show that compared with the standard Moran process, fixation occurs with higher probabilities under a prisoner's dilemma game and coordination game, but with lower probabilities under a coexistence game. The simulation result shows that the fixation time in our mixed process is lower than that in the standard Fermi process. In comparison with the standard Moran process, fixation always takes more time on average in spatial populations, regardless of the game. In addition, the fixation time decreases with the growth of the number of neighbors.

  16. [Research on optimal modeling strategy for licorice extraction process based on near-infrared spectroscopy technology].

    Science.gov (United States)

    Wang, Hai-Xia; Suo, Tong-Chuan; Yu, He-Shui; Li, Zheng

    2016-10-01

    The manufacture of traditional Chinese medicine (TCM) products is always accompanied by processing complex raw materials and real-time monitoring of the manufacturing process. In this study, we investigated different modeling strategies for the extraction process of licorice. Near-infrared spectra associate with the extraction time was used to detemine the states of the extraction processes. Three modeling approaches, i.e., principal component analysis (PCA), partial least squares regression (PLSR) and parallel factor analysis-PLSR (PARAFAC-PLSR), were adopted for the prediction of the real-time status of the process. The overall results indicated that PCA, PLSR and PARAFAC-PLSR can effectively detect the errors in the extraction procedure and predict the process trajectories, which has important significance for the monitoring and controlling of the extraction processes. Copyright© by the Chinese Pharmaceutical Association.

  17. MULTI-DIMENSIONAL MEASURE OF STRATEGY DEVELOPMENT PROCESS FROM A DIFFERENT CONTEXT: AN EMPIRICAL RESEARCH ON TURKISH MANAGERS

    OpenAIRE

    Ozleblebici, Zafer

    2015-01-01

    The purpose of this paper is to provide another explanation of strategy development process from a different context. Even though several studies exploring different approaches to strategy development process have been employed, most of them have examined organizations in similar samplings, more specifically Anglo-Saxon cultures/countries. Therefore, in order to explore the strategy development approaches from a different context, the paper aims to expose and describe the strategy development...

  18. Strategy for design NIR calibration sets based on process spectrum and model space: An innovative approach for process analytical technology.

    Science.gov (United States)

    Cárdenas, V; Cordobés, M; Blanco, M; Alcalà, M

    2015-10-10

    The pharmaceutical industry is under stringent regulations on quality control of their products because is critical for both, productive process and consumer safety. According to the framework of "process analytical technology" (PAT), a complete understanding of the process and a stepwise monitoring of manufacturing are required. Near infrared spectroscopy (NIRS) combined with chemometrics have lately performed efficient, useful and robust for pharmaceutical analysis. One crucial step in developing effective NIRS-based methodologies is selecting an appropriate calibration set to construct models affording accurate predictions. In this work, we developed calibration models for a pharmaceutical formulation during its three manufacturing stages: blending, compaction and coating. A novel methodology is proposed for selecting the calibration set -"process spectrum"-, into which physical changes in the samples at each stage are algebraically incorporated. Also, we established a "model space" defined by Hotelling's T(2) and Q-residuals statistics for outlier identification - inside/outside the defined space - in order to select objectively the factors to be used in calibration set construction. The results obtained confirm the efficacy of the proposed methodology for stepwise pharmaceutical quality control, and the relevance of the study as a guideline for the implementation of this easy and fast methodology in the pharma industry. Copyright © 2015 Elsevier B.V. All rights reserved.

  19. Geometric Process-Based Maintenance and Optimization Strategy for the Energy Storage Batteries

    Directory of Open Access Journals (Sweden)

    Yan Li

    2016-01-01

    Full Text Available Renewable energy is critical for improving energy structure and reducing environment pollution. But its strong fluctuation and randomness have a serious effect on the stability of the microgrid without the coordination of the energy storage batteries. The main factors that influence the development of the energy storage system are the lack of valid operation and maintenance management as well as the cost control. By analyzing the typical characteristics of the energy storage batteries in their life cycle, the geometric process-based model including the deteriorating system and the improving system is firstly built for describing the operation process, the preventive maintenance process, and the corrective maintenance process. In addition, this paper proposes an optimized management strategy, which aims to minimize the long-run average cost of the energy storage batteries by defining the time interval of the detection and preventive maintenance process as well as the optimal corrective maintenance times, subjected to the state of health and the reliability conditions. The simulation is taken under the built model by applying the proposed energy storage batteries’ optimized management strategy, which verifies the effectiveness and applicability of the management strategy, denoting its obvious practicality on the current application.

  20. Development of novel control strategies for single-stage autotrophic nitrogen removal: A process oriented approach

    DEFF Research Database (Denmark)

    Vangsgaard, Anna Katrine; Mauricio Iglesias, Miguel; Gernaey, Krist

    2014-01-01

    operation and rejection of disturbances. Three novel control strategies were developed, evaluated, and benchmarked against each other: a feedforward control (control structure 1 – CS#1), a rule-based feedback control (CS#2), and a feedforward–feedback controller, in which the feedback loop updates the set......The autotrophic nitrogen removing granular sludge process is a novel and intensified process. However, its stable operation and control remain a challenging issue. In this contribution, a process oriented approach was used to develop, evaluate and benchmark novel control strategies to ensure stable...... point of the feedforward loop (CS#3). The CS#1 gave the best performance against disturbances in the ammonium concentration, whereas the CS#2 provided the best performance against disturbances in the organic carbon concentration and dynamic influent conditions. The CS#3 rejected both disturbances...

  1. Influence of Scanning Strategies on Processing of Aluminum Alloy EN AW 2618 Using Selective Laser Melting

    Science.gov (United States)

    Palousek, David; Pantelejev, Libor; Hoeller, Christian; Pichler, Rudolf; Tesicky, Lukas; Kaiser, Jozef

    2018-01-01

    This paper deals with various selective laser melting (SLM) processing strategies for aluminum 2618 powder in order to get material densities and properties close to conventionally-produced, high-strength 2618 alloy. To evaluate the influence of laser scanning strategies on the resulting porosity and mechanical properties a row of experiments was done. Three types of samples were used: single-track welds, bulk samples and samples for tensile testing. Single-track welds were used to find the appropriate processing parameters for achieving continuous and well-shaped welds. The bulk samples were built with different scanning strategies with the aim of reaching a low relative porosity of the material. The combination of the chessboard strategy with a 2 × 2 mm field size fabricated with an out-in spiral order was found to eliminate a major lack of fusion defects. However, small cracks in the material structure were found over the complete range of tested parameters. The decisive criteria was the elimination of small cracks that drastically reduced mechanical properties. Reduction of the thermal gradient using support structures or fabrication under elevated temperatures shows a promising approach to eliminating the cracks. Mechanical properties of samples produced by SLM were compared with the properties of extruded material. The results showed that the SLM-processed 2618 alloy could only reach one half of the yield strength and tensile strength of extruded material. This is mainly due to the occurrence of small cracks in the structure of the built material. PMID:29443912

  2. Influence of Scanning Strategies on Processing of Aluminum Alloy EN AW 2618 Using Selective Laser Melting.

    Science.gov (United States)

    Koutny, Daniel; Palousek, David; Pantelejev, Libor; Hoeller, Christian; Pichler, Rudolf; Tesicky, Lukas; Kaiser, Jozef

    2018-02-14

    This paper deals with various selective laser melting (SLM) processing strategies for aluminum 2618 powder in order to get material densities and properties close to conventionally-produced, high-strength 2618 alloy. To evaluate the influence of laser scanning strategies on the resulting porosity and mechanical properties a row of experiments was done. Three types of samples were used: single-track welds, bulk samples and samples for tensile testing. Single-track welds were used to find the appropriate processing parameters for achieving continuous and well-shaped welds. The bulk samples were built with different scanning strategies with the aim of reaching a low relative porosity of the material. The combination of the chessboard strategy with a 2 × 2 mm field size fabricated with an out-in spiral order was found to eliminate a major lack of fusion defects. However, small cracks in the material structure were found over the complete range of tested parameters. The decisive criteria was the elimination of small cracks that drastically reduced mechanical properties. Reduction of the thermal gradient using support structures or fabrication under elevated temperatures shows a promising approach to eliminating the cracks. Mechanical properties of samples produced by SLM were compared with the properties of extruded material. The results showed that the SLM-processed 2618 alloy could only reach one half of the yield strength and tensile strength of extruded material. This is mainly due to the occurrence of small cracks in the structure of the built material.

  3. Convexity of Ruin Probability and Optimal Dividend Strategies for a General Lévy Process

    Directory of Open Access Journals (Sweden)

    Chuancun Yin

    2015-01-01

    Full Text Available We consider the optimal dividends problem for a company whose cash reserves follow a general Lévy process with certain positive jumps and arbitrary negative jumps. The objective is to find a policy which maximizes the expected discounted dividends until the time of ruin. Under appropriate conditions, we use some recent results in the theory of potential analysis of subordinators to obtain the convexity properties of probability of ruin. We present conditions under which the optimal dividend strategy, among all admissible ones, takes the form of a barrier strategy.

  4. Convexity of Ruin Probability and Optimal Dividend Strategies for a General Lévy Process

    Science.gov (United States)

    Yuen, Kam Chuen; Shen, Ying

    2015-01-01

    We consider the optimal dividends problem for a company whose cash reserves follow a general Lévy process with certain positive jumps and arbitrary negative jumps. The objective is to find a policy which maximizes the expected discounted dividends until the time of ruin. Under appropriate conditions, we use some recent results in the theory of potential analysis of subordinators to obtain the convexity properties of probability of ruin. We present conditions under which the optimal dividend strategy, among all admissible ones, takes the form of a barrier strategy. PMID:26351655

  5. A novel model-based control strategy for aerobic filamentous fungal fed-batch fermentation processes

    DEFF Research Database (Denmark)

    Mears, Lisa; Stocks, Stuart M.; Albaek, Mads O.

    2017-01-01

    A novel model-based control strategy has been developed for filamentous fungal fed-batch fermentation processes. The system of interest is a pilot scale (550 L) filamentous fungus process operating at Novozymes A/S. In such processes, it is desirable to maximize the total product achieved...... is recursively updated using on-line measurements. The model was applied in order to predict the current system states, including the biomass concentration, and to simulate the expected future trajectory of the system until a specified end time. In this way, the desired feed rate is updated along the progress...

  6. Development strategy and process models for phased automation of design and digital manufacturing electronics

    Science.gov (United States)

    Korshunov, G. I.; Petrushevskaya, A. A.; Lipatnikov, V. A.; Smirnova, M. S.

    2018-03-01

    The strategy of quality of electronics insurance is represented as most important. To provide quality, the processes sequence is considered and modeled by Markov chain. The improvement is distinguished by simple database means of design for manufacturing for future step-by-step development. Phased automation of design and digital manufacturing electronics is supposed. The MatLab modelling results showed effectiveness increase. New tools and software should be more effective. The primary digital model is proposed to represent product in the processes sequence from several processes till the whole life circle.

  7. Neural bases of a specific strategy for visuospatial processing in rugby players.

    Science.gov (United States)

    Sekiguchi, Atsushi; Yokoyama, Satoru; Kasahara, Satoshi; Yomogida, Yukihito; Takeuchi, Hikaru; Ogawa, Takeshi; Taki, Yasuyuki; Niwa, Shin-Ichi; Kawashima, Ryuta

    2011-10-01

    Rugby is one of the most tactically complex sports. Rugby coaching theory suggests that rugby players need to possess various cognitive abilities. A previous study claimed that rugby players have high visuospatial awareness, which is induced by a strategy described as taking a "bird's eye view." To examine if there were differential cortical networks related to visuospatial processing tasks among top-level rugby players and control novices, we compared brain activities during a visuospatial processing task between 20 male top-level rugby players (Top) and 20 control novice males (Novice) using functional magnetic resonance imaging (fMRI). To avoid the effect of differential behavioral performances on brain activation, we recruited novices whose visuospatial ability was expected to match that of the rugby players. We adopted a 3-D mental rotation task during fMRI scanning as a visuospatial processing task. Significantly greater activations from baseline were observed for the Top group than for the Novice group in the right superior parietal lobe and lateral occipital cortex. Significantly greater deactivations from baseline were observed for the Top group than for the Novice group in the right medial prefrontal cortex. The discrepancy between psychobehavioral outputs and the fMRI results suggested the existence of a cognitive strategy among top-level rugby players that differs from that among control novices. The greater activation of the right superior parietal lobe and lateral occipital cortex in top-level rugby players suggested a strategy involving visuospatial cognitive processing with respect to the bird's eye view. In addition, the right medial prefrontal cortex is known to be a part of the default mode networks, suggesting an additional cognitive load for the Top group when using the bird's-eye-view strategy. This further supported the existence of a specific cognitive strategy among top-level rugby players.

  8. Mapping processing strategies in learning from expository text: an exploratory eye tracking study followed by a cued recall

    OpenAIRE

    Catrysse, Leen; Gijbels, D.; Donche, V.; de Maeyer, Sven; van den Bossche, Piet; Gommers, L.

    2016-01-01

    This study starts from the observation that current empirical research on students' processing strategies in higher education has mainly focused on the use of self-report instruments to measure students' general preferences towards processing strategies. In contrast, there is a rather limited use of more direct and online observation techniques to uncover differences in processing strategies at a task specific level. We based our study on one of the most influential studies in the domain of S...

  9. Process strategies for ultra-deep x-ray lithography at the Advanced Photon Source

    International Nuclear Information System (INIS)

    Mancini, D.C.; Moldovan, N.; Divan, R.; De Carlo, F.; Yaeger, J.

    2001-01-01

    For the past five years, we have been investigating and advancing processing capabilities for deep x-ray lithography (DXRL) using synchrotron radiation from a bending magnet at the Advanced Photon Source (APS), with an emphasis on ultra-deep structures (1mm to 1cm thick). The use of higher-energy x-rays has presented many challenges in developing optimal lithographic techniques for high-aspect ratio structures: mask requirements, resist preparation, exposure, development, and post-processing. Many problems are more severe for high-energy exposure of thicker films than for sub-millimeter structures and affect resolution, processing time, adhesion, damage, and residue. A number of strategies have been created to overcome the challenges and limitations of ultra-deep x-ray lithography (UDXRL), that have resulted in the current choices for mask, substrate, and process flow at the APS. We describe our current process strategies for UDXRL, how they address the challenges presented, and their current limitations. We note especially the importance of the process parameters for use of the positive tone resist PMMA for UDXRL, and compare to the use of negative tone resists such as SU-8 regarding throughput, resolution, adhesion, damage, and post-processing.

  10. Improved electron injection in spin coated Alq3 incorporated ZnO thin film in the device for solution processed OLEDs

    Science.gov (United States)

    Dasi, Gnyaneshwar; Ramarajan, R.; Thangaraju, Kuppusamy

    2018-04-01

    We deposit tris-(8-hydroxyquinoline)aluminum (Alq3) incorporated zinc oxide (ZnO) thin films by spin coating method under the normal ambient. It showed the higher transmittance (90% at 550 nm) when compared to that (80% at 550 nm) of spin coated pure ZnO film. SEM studies show that the Alq3 incorporation in ZnO film also enhances the formation of small sized particles arranged in the network of wrinkles on the surface. XRD reveals the improved crystalline properties upon Alq3 inclusion. We fabricate the electron-only devices (EODs) with the structure of ITO/spin coated ZnO:Alq3 as ETL/Alq3 interlayer/LiF/Al. The device showed the higher electron current density of 2.75 mA/cm2 at 12V when compared to that (0.82 mA/cm2 at 12V) of the device using pure ZnO ETL. The device results show that it will be useful to fabricate the low-cost solution processed OLEDs for future lighting and display applications.

  11. Enhancing Competitiveness Business Strategy of Organic Vegetables Using Analytical Hierarchy Process (AHP

    Directory of Open Access Journals (Sweden)

    Pristiana Widyastuti

    2017-09-01

    Full Text Available Public awareness about healthy lifestyles leads people to want to understand more about the food they consume. Choosing organic vegetables is one alternative choices when seeking to have a healthy body and healthy lifestyle. Unfortunately, not a lot of organic vegetable farmers in Indonesia succeed in seizing the organic vegetable market rather than the non-organic and the competition with imported organic vegetables into Indonesia prevents farmers from thriving. This study aims to: 1 Analyze the factors affecting the competitiveness of the organic vegetables market; 2 Analyze the appropriate strategy for increasing the competitiveness of the organic vegetables market; 3 Analyze the factors priority strategies for improving the competitiveness of the organic vegetables market. Porter's Generic Model and Analysis Analytical Hierarchy Process (AHP is used to determine the best strategy. The research found that organic vegetables marketing channels are still dominated by conventional market; the higher cost for intensive cultivation of organic vegetables. The main strategies are derived from the analysis is focusing on market delivery. There needs to be retailers of organic vegetables either modern or traditional to display these products. The establishment of organic vegetable outlets and online marketing that are not dependent on large retail (hypermarket become recommendations in this study. Bahasa Indonesia Abstrak: Kesadaran masyarakat tentang gaya hidup sehat memberi pilihan kepada masyarakat untuk memahami makanan yang mereka konsumsi. Pilihan sayuran organik merupakan salah satu alternatif untuk memiliki tubuh sehat dan gaya hidup sehat bagi masyarakat. Sayangnya, tidak banyak petani sayuran organik di Indonesia yang berhasil merebut pasar sayuran organik daripada non organic. Persaingan produk impor sayuran organik ke Indonesia membuat petani tidak bisa berkembang. Penelitian ini bertujuan untuk: 1 Menganalisis faktor-faktor yang

  12. Logical reasoning versus information processing in the dual-strategy model of reasoning.

    Science.gov (United States)

    Markovits, Henry; Brisson, Janie; de Chantal, Pier-Luc

    2017-01-01

    One of the major debates concerning the nature of inferential reasoning is between counterexample-based strategies such as mental model theory and statistical strategies underlying probabilistic models. The dual-strategy model, proposed by Verschueren, Schaeken, & d'Ydewalle (2005a, 2005b), which suggests that people might have access to both kinds of strategy has been supported by several recent studies. These have shown that statistical reasoners make inferences based on using information about premises in order to generate a likelihood estimate of conclusion probability. However, while results concerning counterexample reasoners are consistent with a counterexample detection model, these results could equally be interpreted as indicating a greater sensitivity to logical form. In order to distinguish these 2 interpretations, in Studies 1 and 2, we presented reasoners with Modus ponens (MP) inferences with statistical information about premise strength and in Studies 3 and 4, naturalistic MP inferences with premises having many disabling conditions. Statistical reasoners accepted the MP inference more often than counterexample reasoners in Studies 1 and 2, while the opposite pattern was observed in Studies 3 and 4. Results show that these strategies must be defined in terms of information processing, with no clear relations to "logical" reasoning. These results have additional implications for the underlying debate about the nature of human reasoning. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

  13. THE DANUBE STRATEGY AND ITS IMPACT ON THE PROCESS OF UKRAINE-EU RAPPROCHEMENT

    Directory of Open Access Journals (Sweden)

    Artem FYLYPENKO

    2014-10-01

    Full Text Available The research paper analyzes the impact of the Danube strategy on the process of Ukraine-EU rapprochement. The strategy itself is primarily a political document, which provides guidance to States in the region and the EU institutions to ensure the development of the Danube region. This document is unique in a number of parameters. First, its implementation will affect not only the eight Danube States - members of the EU, but also the neighboring countries of the EU. Secondly, it is a comprehensive document that covers not only the transport sector, but environmental issues, development of culture and tourism, education and many others. For Ukraine, the value of the Strategy is primarily due to the fact that in the context of the course of European integration this document provides additional opportunities for entry into the common European space. In addition, the Danube strategy can be considered as a tool for regional development. Strategy parameters cover four regions of Ukraine, located in the Danube River Basin - Odessa, Chernivtsi, Transcarpathian and Ivano-Frankivsk region.

  14. Between the processes of strengthening and weakening of the Family Health Strategy

    Directory of Open Access Journals (Sweden)

    Regina Stella Spagnuolo

    2013-06-01

    Full Text Available This was a qualitative study with the purpose of designing a meta-model for the work process of the Family Health Strategy (FHS team. It was based on the experience of six sample groups, composed of their members (physicians, professional nurses, dentists, dental assistants, licensed technical nurses and community health agents in a city in São Paulo state, Brazil, totaling 54 subjects. Six theoretical models emerged from non-directive interviews. These were analyzed according to Grounded Theory and submitted to the meta-synthesis strategy, which produced the meta-model "between the processes of strengthening and weakening of the FHS model: professional-team-community reciprocity as an intervening component". When analyzed in light of the Theory of Complexity (TC, it showed to be a work with a vertical and authoritarian tendency, which is largely hegemonic in the tradition of public health care policies.

  15. Some Strategies for Strengthening Research and Teaching in the Era of the Bologna Process

    Directory of Open Access Journals (Sweden)

    Bernadine VAN GRAMBERG

    2006-10-01

    Full Text Available Universities across the world are undergoing rapid, and often significant, change to compete in an increasingly global environment. The Bologna process of higher education reforms has had its impact not only across Europe but globally given the pressure on universities to compete and to provide students with transferable qualifications in the quest for borderless education. As part of the process universities have been encouraged to differentiate themselves, particularly in terms of being research focused or teaching focus. As a result, many universities are putting in place strategies to boost their research output. With a view to contributing to the discussions by the International Advisory Board of the Department of Public Administration at Babes- Bolyai University, this paper overviews some of the strategies put in place by Australian Universities in order to improve the research output of their academic staff and provides some university marketing based suggestions for Babes-Bolyai University.

  16. Niche accumulation and hybridisation strategies in transition processes towards a sustainable energy system: An assessment of differences and pitfalls

    International Nuclear Information System (INIS)

    Raven, Rob

    2007-01-01

    This paper assesses two patterns in transition processes for using them as strategies towards a sustainable energy system, i.e., niche accumulation and hybridisation. Both play important but different roles in transitions. The expected success of these strategies depends on the innovation's history and the innovation context. The different strategies are illustrated with several examples from the energy domain

  17. Herpes Simplex Virus Type 1 Glycoprotein B Requires a Cysteine Residue at Position 633 for Folding, Processing, and Incorporation into Mature Infectious Virus Particles

    Science.gov (United States)

    Laquerre, Sylvie; Anderson, Dina B.; Argnani, Rafaela; Glorioso, Joseph C.

    1998-01-01

    Herpes simplex virus type 1 (HSV-1) glycoprotein B (gB) resides in the virus envelope in an oligomeric form and plays an essential role in virus entry into susceptible host cells. The oligomerizing domain is a movable element consisting of amino acids 626 to 653 in the gB external domain. This domain contains a single cysteine residue at position 633 (Cys-633) that is predicted to form an intramolecular disulfide bridge with Cys-596. In this study, we examined gB oligomerization, processing, and incorporation into mature virus during infection by two mutant viruses in which either the gB Cys-633 [KgB(C633S)] or both Cys-633 and Cys-596 [KgB(C596S/C633S)] residues were mutated to serine. The result of immunofluorescence studies and analyses of released virus particles showed that the mutant gB molecules were not transported to the cell surface or incorporated into mature virus envelopes and thus infectious virus was not produced. Immunoprecipitation studies revealed that the mutant gB molecules were in an oligomeric configuration and that these mutants produced hetero-oligomers with a truncated form of gB consisting of residues 1 to 43 and 595 to 904, the latter containing the oligomerization domain. Pulse-chase experiments in combination with endoglycosidase H treatment determined that the mutant molecules were improperly processed, having been retained in the endoplasmic reticulum (ER). Coimmunoprecipitation experiments revealed that the cysteine mutations resulted in gB misfolding and retention by the molecular chaperones calnexin, calreticulin, and Grp78 in the ER. The altered conformation of the gB mutant glycoproteins was directly detected by a reduction in monoclonal antibody recognition of two previously defined distinct antigenic sites located within residues 381 to 441 and 595 to 737. The misfolded molecules were not transported to the cell surface as hetero-oligomers with wild-type gB, suggesting that the conformational change could not be corrected by

  18. Effectiveness of sensory processing strategies on activity level in inclusive preschool classrooms

    Directory of Open Access Journals (Sweden)

    Lin CL

    2012-10-01

    Full Text Available Chien-Lin Lin,1,2 Yu-Fan Min,3 Li-Wei Chou,1,2,* Chin-Kai Lin,4,* 1Department of Physical Medicine and Rehabilitation, China Medical University Hospital, Taichung, Taiwan; 2School of Chinese Medicine, College of Chinese Medicine, China Medical University, Taichung, Taiwan; 3Faith, Hope and Love, Center for Children and Adults With Disabilities, Taichung, Taiwan; 4Program of Early Intervention, Department of Early Childhood Education, National Taichung University of Education, Taichung, Taiwan*These authors contributed equally to this workBackground: The purpose of this study was to investigate the effectiveness of sensory processing strategies in improving the activity level of children with sensory integration dysfunction.Methods: The study used a matching-only pretest–posttest control group design, which requires random matching of sensory integration dysfunction to the corresponding intervention group (n = 18 and control group (n = 18. The intervention group comprised 3–6-year-old children who received an 8-week school-day intervention during implementation of the theme curriculum.Results: The 8-week treatment significantly reduced the activity level and foot-swinging episodes in children with sensory integration dysfunction, and obtained a medium-effect size. However, the level of improvement in the control group did not show any statistically significant change.Conclusion: Sensory processing strategies could improve activity levels in children with sensory integration dysfunction. However, this study was unable to exclude a developmental effect. The social validity results show that sensory processing strategies can be integrated into the theme curriculum and improve activity levels in children.Keywords: activity level, preschool inclusive classroom, sensory integration dysfunction, sensory processing strategy

  19. Development of on the machine process monitoring and control strategy in Robot Assisted Polishing

    DEFF Research Database (Denmark)

    Pilny, Lukas; Bissacco, Giuliano

    2015-01-01

    Robot Assisted Polishing (RAP) can be used to polish rotational symmetric and free form components achieving surface roughness down to Sa 10 nm. With the aim to enable unmanned robust and cost efficient application of RAP, this paper presents the development of a monitoring and control strategy....... The multisensory approach was experimentally validated in polishing with bonded abrasives demonstrating its suitability for process control in RAP....

  20. Learning Processes of Students in Pre-Vocational Secondary Education: Relations between Goal Orientations, Information Processing Strategies and Development of Conceptual Knowledge

    Science.gov (United States)

    Koopman, Maaike; Den Brok, Perry; Beijaard, Douwe; Teune, Peter

    2011-01-01

    The purpose of this study was to investigate relations between goal orientations, information processing strategies and development of conceptual knowledge of pre-vocational secondary education students (n = 719; 14 schools). Students' preferences for certain types of goals and information processing strategies were examined using questionnaires.…

  1. Core Processes Roadmap to Deploy the Higher Education Institution's Internationalization Strategy

    Directory of Open Access Journals (Sweden)

    Elena FLEACĂ

    2017-02-01

    Full Text Available Technological development, competition and globalisation are radically changing the landscape of higher education which maintains its crucial role in individual and societal advancement. Many higher education institutions are competing on increasing their attractiveness by providing innovative curricula, excellence in teaching and research opportunities. The paper attempts to tackle the push for stronger international presence which brings favourable conditions for internationalisation strategy at institutional level. Based on useful methods from quality management and business process reengineering, the author proposed a coherent organizational model for a higher education institution strategy, mainstreaming key areas as international mobility for students and staff, internationalization and improvement of curricula and new e-learning methods, and strategic cooperation, partnerships and capacity building with international stakeholders. The findings stress the benefits of a holistic approach in assuring the governance of internationalization strategy composed of three core processes groups - academic, research, and wider business relationships – so as to provide that process architecture is able to deliver a value added internationalised higher education offer.

  2. Oil sands and organizational cultures: strategy and stakeholder dynamics in an environmental public consultation process (Alberta)

    Energy Technology Data Exchange (ETDEWEB)

    Rouse, M.J.

    2000-07-01

    The demand for corporate responsiveness to environmental and social concerns, more specifically the requirement for public participation/consultation with stakeholders is, according to industry insiders, one of the most pressing changes for the oil industry. For this study, data on a public consultation process involving Syncrude Canada Limited, Alberta Environmental Protection, and the Alberta Energy and Utilities Board was collected through a combination of public hearing transcripts, participant observation, interview methodologies and reports. >From the perspective of organizational strategy, stakeholder relations, institutional theory and organizational cultures, the author investigated the public consultation process. Strategic action was the central theme to emerge through the findings. Positioning strategies influenced by stakeholder status from the organization's viewpoint and stakeholder relationships informed by the network of stakeholder relationships are included in stakeholder dynamics. The management of organizational culture and the creation of an institutional field to generate and maintain values across the relational field of focal organizations, and reduce costs and conflicts, are included in strategic outcomes. The elaboration and extension of components of stakeholder and institutional theories are part of further results, as well as an integrated understanding of the dynamic interconnectedness of organizational cultures, strategies and stakeholders in an environmental public consultation process.

  3. Adding Value to Fruit Processing Waste: Innovative Ways to Incorporate Fibers from Berry Pomace in Baked and Extruded Cereal-based Foods-A SUSFOOD Project.

    Science.gov (United States)

    Rohm, Harald; Brennan, Charles; Turner, Charlotta; Günther, Edeltraud; Campbell, Grant; Hernando, Isabel; Struck, Susanne; Kontogiorgos, Vassilis

    2015-11-24

    This article communicates the set-up of BERRYPOM, a European research project established in the second call of the SUStainable FOOD Production and Consumption (SUSFOOD) network. The project deals with the by-product from berry processing, which is frequently recycled as animal feed, composted or utilized for biogas production. With BERRYPOM it is proposed to analyze the value of berry pomace, to optimize the recovery of bioactive compounds from pomace material, and to incorporate processed berry pomace in cereal-based foods to take advantage of nutritional benefits that originate from its fiber and the content of bioactive substances. Additionally, extraction methods will be evaluated to obtain products rich in phytochemicals, and the influence of processing steps on the antioxidant capacity of pomace will be analyzed. The fiber extracts will then also be utilized in different cereal-based foods and extruded products. As project outcome we expect a substantial increase of knowledge concerning fiber and phytochemicals extraction from berry pomace, its suitability for enhancing nutritional and sensory properties of cereal-based foods, and its effects on the sustainability of the food chain.

  4. Adding Value to Fruit Processing Waste: Innovative Ways to Incorporate Fibers from Berry Pomace in Baked and Extruded Cereal-based Foods—A SUSFOOD Project

    Directory of Open Access Journals (Sweden)

    Harald Rohm

    2015-11-01

    Full Text Available This article communicates the set-up of BERRYPOM, a European research project established in the second call of the SUStainable FOOD Production and Consumption (SUSFOOD network. The project deals with the by-product from berry processing, which is frequently recycled as animal feed, composted or utilized for biogas production. With BERRYPOM it is proposed to analyze the value of berry pomace, to optimize the recovery of bioactive compounds from pomace material, and to incorporate processed berry pomace in cereal-based foods to take advantage of nutritional benefits that originate from its fiber and the content of bioactive substances. Additionally, extraction methods will be evaluated to obtain products rich in phytochemicals, and the influence of processing steps on the antioxidant capacity of pomace will be analyzed. The fiber extracts will then also be utilized in different cereal-based foods and extruded products. As project outcome we expect a substantial increase of knowledge concerning fiber and phytochemicals extraction from berry pomace, its suitability for enhancing nutritional and sensory properties of cereal-based foods, and its effects on the sustainability of the food chain.

  5. Multi-tiered system of support incorporating the R.E.N.E.W. process and its relationship to perception of school safety and office discipline referrals

    Science.gov (United States)

    Flood, Molly M.

    This study examined the relationship between the fidelity of multi-tier school-wide positive behavior interventions and supports (SWPBIS) and staff perception of school safety and office discipline referrals. This research provided a case study on multi-tier supports and interventions, and the RENEW person-centered planning process in an alternative special education center following the implementation of a multi-tier SWPBIS model. Pennsylvania is one of several states looking to adopt an effective Tier III behavioral tool. The research described the results of an analysis of implementation fidelity on a multi-tiered school-wide positive behavior support model developed at a special education center operated by a public school system entity. This research explored the fidelity of SWPBIS implementation; analyzed the relationship of SWPBIS to school climate as measured by staff perceptions and reduction of office discipline referrals (ODR); explored tier III supports incorporating a process Rehabilitation and Empowerment, Natural Supports, Education and Work (RENEW); and investigated the potential sustainability of the RENEW process as a multi-tier system of support. This study investigated staff perceptions on integrated supports between schools and communities and identified the degree of relationship to school risk factors, school protective factors, and office discipline referrals following the building of cooperative partnerships between Systems of Care and Local Education Agencies.

  6. Insights on Genomic and Molecular Alterations in Multiple Myeloma and Their Incorporation towards Risk-Adapted Treatment Strategy: Concise Clinical Review

    Directory of Open Access Journals (Sweden)

    Taiga Nishihori

    2017-01-01

    Full Text Available Although recent advances in novel treatment approaches and therapeutics have shifted the treatment landscape of multiple myeloma, it remains an incurable plasma cell malignancy. Growing knowledge of the genome and expressed genomic information characterizing the biologic behavior of multiple myeloma continues to accumulate. However, translation and incorporation of vast molecular understanding of complex tumor biology to deliver personalized and precision treatment to cure multiple myeloma have not been successful to date. Our review focuses on current evidence and understanding of myeloma biology with characterization in the context of genomic and molecular alterations. We also discuss future clinical application of the genomic and molecular knowledge, and more translational research is needed to benefit our myeloma patients.

  7. A novel model-based control strategy for aerobic filamentous fungal fed-batch fermentation processes.

    Science.gov (United States)

    Mears, Lisa; Stocks, Stuart M; Albaek, Mads O; Cassells, Benny; Sin, Gürkan; Gernaey, Krist V

    2017-07-01

    A novel model-based control strategy has been developed for filamentous fungal fed-batch fermentation processes. The system of interest is a pilot scale (550 L) filamentous fungus process operating at Novozymes A/S. In such processes, it is desirable to maximize the total product achieved in a batch in a defined process time. In order to achieve this goal, it is important to maximize both the product concentration, and also the total final mass in the fed-batch system. To this end, we describe the development of a control strategy which aims to achieve maximum tank fill, while avoiding oxygen limited conditions. This requires a two stage approach: (i) calculation of the tank start fill; and (ii) on-line control in order to maximize fill subject to oxygen transfer limitations. First, a mechanistic model was applied off-line in order to determine the appropriate start fill for processes with four different sets of process operating conditions for the stirrer speed, headspace pressure, and aeration rate. The start fills were tested with eight pilot scale experiments using a reference process operation. An on-line control strategy was then developed, utilizing the mechanistic model which is recursively updated using on-line measurements. The model was applied in order to predict the current system states, including the biomass concentration, and to simulate the expected future trajectory of the system until a specified end time. In this way, the desired feed rate is updated along the progress of the batch taking into account the oxygen mass transfer conditions and the expected future trajectory of the mass. The final results show that the target fill was achieved to within 5% under the maximum fill when tested using eight pilot scale batches, and over filling was avoided. The results were reproducible, unlike the reference experiments which show over 10% variation in the final tank fill, and this also includes over filling. The variance of the final tank fill is

  8. Thermal-capillary analysis of Czochralski and liquid encapsulated Czochralski crystal growth. II - Processing strategies

    Science.gov (United States)

    Derby, J. J.; Brown, R. A.

    1986-01-01

    The pseudosteady-state heat transfer model developed in a previous paper is augmented with constraints for constant crystal radius and melt/solid interface deflection. Combinations of growth rate, and crucible and bottom-heater temperatures are tested as processing parameters for satisfying the constrained thermal-capillary problem over a range of melt volumes corresponding to the sequence occuring during the batchwise Czochralski growth of a small-diameter silicon crystal. The applicability of each processing strategy is judged by the range of existence of the solution, in terms of melt volume and the values of the axial and radial temperature gradients in the crystal.

  9. Transformation Strategies between Block-Oriented and Graph-Oriented Process Modelling Languages

    DEFF Research Database (Denmark)

    Mendling, Jan; Lassen, Kristian Bisgaard; Zdun, Uwe

    to abstract from concrete transformationstrategies by distinguishing two major paradigms for process modelling languages:block-oriented languages (such as BPEL and BPML) and graph-oriented languages(such as EPCs and YAWL). The contribution of this paper are generic strategiesfor transforming from block......Much recent research work discusses the transformation between differentprocess modelling languages. This work, however, is mainly focussed on specific processmodelling languages, and thus the general reusability of the applied transformationconcepts is rather limited. In this paper, we aim......-oriented process languages to graph-oriented languages,and vice versa. We also present two case studies of applying our strategies....

  10. BENCHPAR PROJECT. How to Incorporate ThermaI-Hydro-Mechanical Coupled Processes into Performance Assessments and Design Studies for Radioactive Waste Disposal in Geological Formations. Guidance Document

    International Nuclear Information System (INIS)

    Stephansson, O.; Andersson, Johan

    2005-02-01

    The objective of this Guidance Document is to provide advice on how to incorporate thermo-hydro-mechanical (THM) coupled processes into Performance Assessments (PAS) and design studies for radioactive waste disposal in geological formations to be experienced in a European context. The document has been generated by the EU research project BENCHPAR: Benchmark Tests and Guidance on Coupled Processes for Performance Assessment of Nuclear Waste Repositories. The document starts in Section 1 with an explanation of why numerical analyses incorporating THM mechanisms are required for radioactive waste studies and provides background material on the subject. Then, the THM processes and their interactions are explained in Section 2. Three case examples of THM numerical analysis are presented in Section 3 to illustrate the type of work that can be conducted to study the near-field, upscaling, and the far-field. For the three cases, there is discussion on the main findings, the relevance to a safety case, the relative importance of the different couplings, and the uncertainties involved. The importance and priority of the THM couplings are then summarized in Section 4. It is especially important to be able to technically audit the numerical analyses in order to establish that all the relevant variables, parameters and mechanisms have been included in the modelling and hence that the numerical model adequately represents the rock and engineering reality. Accordingly, recommended soft and hard auditing procedures are presented in Section 5. In this Guidance Document, we emphasize especially that the most important step in numerical modelling is not executing the calculations per se, but the earlier conceptualization of the problem regarding the dominant processes, the material properties and parameters, the engineering perturbations, and their mathematical presentations. The associated modelling component of addressing the uncertainties and estimating their influence on the

  11. Board members’ contribution to strategy: The mediating role of board internal processes

    Directory of Open Access Journals (Sweden)

    Carmen Barroso-Castro

    2017-05-01

    Full Text Available This study aims to explore what directors do on the board, to what extent the processes occurring in the board allow the sharing and integrating of the existing knowledge, thus facilitating the board members’ contributions to strategy. We adopt the view that the internal board processes increase the impact of the cognitive resources on board performance. Using survey data from 200 large Spanish companies we demonstrate that directors’ level of knowledge of the firm and board job-related diversity positively influence the degree of the board's strategic involvement. Additionally, the internal processes that take place within the board – particularly Cognitive Conflict, the Critical and Independent Approach and the Comprehensive Discussion Process – influence the board's strategic involvement and play a partial mediating role on the aforementioned relationships. However, our results show no evidence for a positive relationship between Board Meeting Dynamics and the board's strategic involvement.

  12. A proposed strategy for upgrade of the ORNL Process Wastewater Treatment Plant

    International Nuclear Information System (INIS)

    Kent, T.E.; Robinson, S.M.; Scott, C.B.

    1990-01-01

    An approach to the upgrade of the radiological Process Wastewater Treatment Plant (PWTP) at Oak Ridge National Laboratory (ORNL) has been developed that, if adopted, will result in significant cost reductions and improved water quality. The strategy described in this report satisfies the short-term upgrade needs of the PWTP and ultimately results in replacement of existing PWTP softening/ion- exchange technology with a zeolite molecular sieve treatment system for removal of radioactive contaminants from process wastewater. Use of zeolites will improve wastewater quality while reducing operating and disposal costs. The zeolite system would be constructed adjacent to the site now occupied by the Non-Radiological Process Wastewater Treatment Plant (NRWTP), thereby consolidating all process wastewater treatment systems at one location. 4 refs., 4 figs

  13. Software Process Improvement: Supporting the Linking of the Software and the Business Strategies

    Science.gov (United States)

    Albuquerque, Adriano Bessa; Rocha, Ana Regina; Lima, Andreia Cavalcanti

    The market is becoming more and more competitive, a lot of products and services depend of the software product and the software is one of the most important assets, which influence the organizations’ businesses. Considering this context, we can observe that the companies must to deal with the software, developing or acquiring, carefully. One of the perspectives that can help to take advantage of the software, supporting effectively the business, is to invest on the organization’s software processes. This paper presents an approach to evaluate and improve the processes assets of the software organizations, based on internationally well-known standards and process models. This approach is supported by automated tools from the TABA Workstation and is part of a wider improvement strategy constituted of three layers (organizational layer, process execution layer and external entity layer). Moreover, this paper presents the experience of use and their results.

  14. A proposed strategy for upgrade of the ORNL process wastewater treatment plant

    International Nuclear Information System (INIS)

    Kent, T.E.; Robinson, S.M.; Scott, C.B.

    1990-01-01

    This paper reports on an approach to the upgrade of the radiological Process Wastewater Treatment Plant (PWTP) at Oak Ridge National Laboratory (ORNL), which has been developed and that, if adopted, will result in significant cost reductions and improved water quality. The strategy described in this report satisfies the short-term upgrade needs of the PWTP and ultimately results in replacement of existing PWTP softening/ion-exchange technology with a zeolite molecular sieve treatment system for removal of radioactive contaminants from process wastewater. Use of zeolites will improve wastewater quality while reducing operating and disposal costs. The zeolite system would be constructed adjacent to the site now occupied by the Non-Radiological Process Wastewater Treatment Plant (NRWTP), thereby consolidating all process wastewater treatment systems at one location

  15. The Role of mPOS System in Process Change and Strategy Change: A Situated Change Perspective

    OpenAIRE

    Yao Chin Lin; Nhu-Hang Ha; Kuo-Sung Lin

    2015-01-01

    The purpose of this study is to revisit the relationship among information technology (IT), Process, and Strategy. We focus on the impact of mobile Point of Sales (mPOS) on changing of operational processes in the restaurant industry. This study investigates the changing of IT strategy and service strategy. The research model was developed based on the literature (strategic alignment model and situated change perspective) and inputs from the restaurant industry and IT experts. The data of thi...

  16. Mapping processing strategies in learning from expository text: an exploratory eye tracking study followed by a cued recall

    NARCIS (Netherlands)

    Catrysse, Leen; Gijbels, D.; Donche, V.; de Maeyer, Sven; van den Bossche, Piet; Gommers, L.

    2016-01-01

    This study starts from the observation that current empirical research on students' processing strategies in higher education has mainly focused on the use of self-report instruments to measure students' general preferences towards processing strategies. In contrast, there is a rather limited use of

  17. Mapping Processing Strategies in Learning from Expository Text: An Exploratory Eye Tracking Study Followed by a Cued Recall

    Science.gov (United States)

    Catrysse, Leen; Gijbels, David; Donche, Vincent; De Maeyer, Sven; Van den Bossche, Piet; Gommers, Luci

    2016-01-01

    This study starts from the observation that current empirical research on students' processing strategies in higher education has mainly focused on the use of self-report instruments to measure students' general preferences towards processing strategies. In contrast, there is a rather limited use of more direct and online observation techniques to…

  18. Study on emission characteristics and reduction strategy of nitrous oxide during wastewater treatment by different processes.

    Science.gov (United States)

    Sun, Shichang; Bao, Zhiyuan; Sun, Dezhi

    2015-03-01

    Given the inexorable increase in global wastewater treatment, increasing amounts of nitrous oxide are expected to be emitted from wastewater treatment plants and released to the atmosphere. It has become imperative to study the emission and control of nitrous oxide in the various wastewater treatment processes currently in use. In the present investigation, the emission characteristics and the factors affecting the release of nitrous oxide were studied via full- and pilot-scale experiments in anoxic-oxic, sequencing batch reactor and oxidation ditch processes. We propose an optimal treatment process and relative strategy for nitrous oxide reduction. Our results show that both the bio-nitrifying and bio-denitrifying treatment units in wastewater treatment plants are the predominant sites for nitrous oxide production in each process, while the aerated treatment units are the critical sources for nitrous oxide emission. Compared with the emission of nitrous oxide from the anoxic-oxic (1.37% of N-influent) and sequencing batch reactor (2.69% of N-influent) processes, much less nitrous oxide (0.25% of N-influent) is emitted from the oxidation ditch process, which we determined as the optimal wastewater treatment process for nitrous oxide reduction, given the current technologies. Nitrous oxide emissions differed with various operating parameters. Controlling the dissolved oxygen concentration at a proper level during nitrification and denitrification and enhancing the utilization rate of organic carbon in the influent for denitrification are the two critical methods for nitrous oxide reduction in the various processes considered.

  19. The effects of pre-processing strategies in sentiment analysis of online movie reviews

    Science.gov (United States)

    Zin, Harnani Mat; Mustapha, Norwati; Murad, Masrah Azrifah Azmi; Sharef, Nurfadhlina Mohd

    2017-10-01

    With the ever increasing of internet applications and social networking sites, people nowadays can easily express their feelings towards any products and services. These online reviews act as an important source for further analysis and improved decision making. These reviews are mostly unstructured by nature and thus, need processing like sentiment analysis and classification to provide a meaningful information for future uses. In text analysis tasks, the appropriate selection of words/features will have a huge impact on the effectiveness of the classifier. Thus, this paper explores the effect of the pre-processing strategies in the sentiment analysis of online movie reviews. In this paper, supervised machine learning method was used to classify the reviews. The support vector machine (SVM) with linear and non-linear kernel has been considered as classifier for the classification of the reviews. The performance of the classifier is critically examined based on the results of precision, recall, f-measure, and accuracy. Two different features representations were used which are term frequency and term frequency-inverse document frequency. Results show that the pre-processing strategies give a significant impact on the classification process.

  20. Reduction of ZTD outliers through improved GNSS data processing and screening strategies

    Science.gov (United States)

    Stepniak, Katarzyna; Bock, Olivier; Wielgosz, Pawel

    2018-03-01

    Though Global Navigation Satellite System (GNSS) data processing has been significantly improved over the years, it is still commonly observed that zenith tropospheric delay (ZTD) estimates contain many outliers which are detrimental to meteorological and climatological applications. In this paper, we show that ZTD outliers in double-difference processing are mostly caused by sub-daily data gaps at reference stations, which cause disconnections of clusters of stations from the reference network and common mode biases due to the strong correlation between stations in short baselines. They can reach a few centimetres in ZTD and usually coincide with a jump in formal errors. The magnitude and sign of these biases are impossible to predict because they depend on different errors in the observations and on the geometry of the baselines. We elaborate and test a new baseline strategy which solves this problem and significantly reduces the number of outliers compared to the standard strategy commonly used for positioning (e.g. determination of national reference frame) in which the pre-defined network is composed of a skeleton of reference stations to which secondary stations are connected in a star-like structure. The new strategy is also shown to perform better than the widely used strategy maximizing the number of observations available in many GNSS programs. The reason is that observations are maximized before processing, whereas the final number of used observations can be dramatically lower because of data rejection (screening) during the processing. The study relies on the analysis of 1 year of GPS (Global Positioning System) data from a regional network of 136 GNSS stations processed using Bernese GNSS Software v.5.2. A post-processing screening procedure is also proposed to detect and remove a few outliers which may still remain due to short data gaps. It is based on a combination of range checks and outlier checks of ZTD and formal errors. The accuracy of the

  1. Use of the innovation-decision process teaching strategy to promote evidence-based practice.

    Science.gov (United States)

    Schmidt, Nola A; Brown, Janet M

    2007-01-01

    The purpose of this article is to describe the innovation-decision process teaching strategy (I-DPTS) based on the model of diffusion of innovations [Rogers, E. M. (2003). Diffusion of innovations (5th ed.). New York: Free Press]. A goal of baccalaureate nursing education is to develop competencies required for evidence-based practice. Such practice merges clinician expertise, patient preferences, and critical evaluation of the literature to improve patient outcomes and reduce health care costs [Melnyk, B. M. (2005). A primer on evidence-based practice. Paper presented at the Purdue School of Nursing Seventh Annual Helen R. Johnson Leadership Conference, West Lafayette, IN]. Several strategies to promote evidence-based practice have appeared in the literature. However, when they are examined in light of the innovation-decision process (Rogers, 2003), they do not address all the essential steps for adoption to occur. The I-DPTS allows students to achieve competencies necessary to overcome barriers associated with implementing best practices. This strategy was successfully implemented in a senior-level introductory nursing research class. Community representatives identified practice issues that could be addressed by student groups. After conducting a search of the literature, students analyzed the evidence, determined best practice based on the evidence, and developed a policy for implementation in clinical settings. At course end, representatives were invited to attend oral and poster presentations. Use of the I-DPTS better prepares students to implement best practice as they embark on their professional careers.

  2. Decision Process Analysis on Project Priority Strategy: A Case Study of an ICT Design Firm

    Directory of Open Access Journals (Sweden)

    Vincent F. Yu

    2014-01-01

    Full Text Available Project priority strategy is the benchmarking of a corporate operation management strategy and in particular is used by a projects-based research and development firm in the complex competence environment of the information and communication technology (ICT industry. This research takes the variables of external environments and internal resources into account for a firm’s market, technology, and finance assets in order to present a decision process on a project priority strategy. This empirical study also addresses the key factors of the interaction between business on a project development’s supply chain: clients, the examined firm, and suppliers. The findings indicate that a profit-driven project can dominate the firm’s strategic operations and management from the resource-based view and analytic hierarchy process technique perspectives. At the same time, the analysis results contribute significant values to project decision management, which is highly recommended for small-medium enterprises conducting product/project development, project portfolio management, and strategic business management.

  3. Soil mapping and processes models to support climate change mitigation and adaptation strategies: a review

    Science.gov (United States)

    Muñoz-Rojas, Miriam; Pereira, Paulo; Brevik, Eric; Cerda, Artemi; Jordan, Antonio

    2017-04-01

    As agreed in Paris in December 2015, global average temperature is to be limited to "well below 2 °C above pre-industrial levels" and efforts will be made to "limit the temperature increase to 1.5 °C above pre-industrial levels. Thus, reducing greenhouse gas emissions (GHG) in all sectors becomes critical and appropriate sustainable land management practices need to be taken (Pereira et al., 2017). Mitigation strategies focus on reducing the rate and magnitude of climate change by reducing its causes. Complementary to mitigation, adaptation strategies aim to minimise impacts and maximize the benefits of new opportunities. The adoption of both practices will require developing system models to integrate and extrapolate anticipated climate changes such as global climate models (GCMs) and regional climate models (RCMs). Furthermore, integrating climate models driven by socio-economic scenarios in soil process models has allowed the investigation of potential changes and threats in soil characteristics and functions in future climate scenarios. One of the options with largest potential for climate change mitigation is sequestering carbon in soils. Therefore, the development of new methods and the use of existing tools for soil carbon monitoring and accounting have therefore become critical in a global change context. For example, soil C maps can help identify potential areas where management practices that promote C sequestration will be productive and guide the formulation of policies for climate change mitigation and adaptation strategies. Despite extensive efforts to compile soil information and map soil C, many uncertainties remain in the determination of soil C stocks, and the reliability of these estimates depends upon the quality and resolution of the spatial datasets used for its calculation. Thus, better estimates of soil C pools and dynamics are needed to advance understanding of the C balance and the potential of soils for climate change mitigation. Here

  4. Dealing with feelings: characterization of trait alexithymia on emotion regulation strategies and cognitive-emotional processing.

    Directory of Open Access Journals (Sweden)

    Marte Swart

    Full Text Available BACKGROUND: Alexithymia, or "no words for feelings", is a personality trait which is associated with difficulties in emotion recognition and regulation. It is unknown whether this deficit is due primarily to regulation, perception, or mentalizing of emotions. In order to shed light on the core deficit, we tested our subjects on a wide range of emotional tasks. We expected the high alexithymics to underperform on all tasks. METHOD: Two groups of healthy individuals, high and low scoring on the cognitive component of the Bermond-Vorst Alexithymia Questionnaire, completed questionnaires of emotion regulation and performed several emotion processing tasks including a micro expression recognition task, recognition of emotional prosody and semantics in spoken sentences, an emotional and identity learning task and a conflicting beliefs and emotions task (emotional mentalizing. RESULTS: The two groups differed on the Emotion Regulation Questionnaire, Berkeley Expressivity Questionnaire and Empathy Quotient. Specifically, the Emotion Regulation Quotient showed that alexithymic individuals used more suppressive and less reappraisal strategies. On the behavioral tasks, as expected, alexithymics performed worse on recognition of micro expressions and emotional mentalizing. Surprisingly, groups did not differ on tasks of emotional semantics and prosody and associative emotional-learning. CONCLUSION: Individuals scoring high on the cognitive component of alexithymia are more prone to suppressive emotion regulation strategies rather than reappraisal strategies. Regarding emotional information processing, alexithymia is associated with reduced performance on measures of early processing as well as higher order mentalizing. However, difficulties in the processing of emotional language were not a core deficit in our alexithymic group.

  5. Optimized breeding strategies for multiple trait integration: II. Process efficiency in event pyramiding and trait fixation.

    Science.gov (United States)

    Peng, Ting; Sun, Xiaochun; Mumm, Rita H

    2014-01-01

    Multiple trait integration (MTI) is a multi-step process of converting an elite variety/hybrid for value-added traits (e.g. transgenic events) through backcross breeding. From a breeding standpoint, MTI involves four steps: single event introgression, event pyramiding, trait fixation, and version testing. This study explores the feasibility of marker-aided backcross conversion of a target maize hybrid for 15 transgenic events in the light of the overall goal of MTI of recovering equivalent performance in the finished hybrid conversion along with reliable expression of the value-added traits. Using the results to optimize single event introgression (Peng et al. Optimized breeding strategies for multiple trait integration: I. Minimizing linkage drag in single event introgression. Mol Breed, 2013) which produced single event conversions of recurrent parents (RPs) with ≤8 cM of residual non-recurrent parent (NRP) germplasm with ~1 cM of NRP germplasm in the 20 cM regions flanking the event, this study focused on optimizing process efficiency in the second and third steps in MTI: event pyramiding and trait fixation. Using computer simulation and probability theory, we aimed to (1) fit an optimal breeding strategy for pyramiding of eight events into the female RP and seven in the male RP, and (2) identify optimal breeding strategies for trait fixation to create a 'finished' conversion of each RP homozygous for all events. In addition, next-generation seed needs were taken into account for a practical approach to process efficiency. Building on work by Ishii and Yonezawa (Optimization of the marker-based procedures for pyramiding genes from multiple donor lines: I. Schedule of crossing between the donor lines. Crop Sci 47:537-546, 2007a), a symmetric crossing schedule for event pyramiding was devised for stacking eight (seven) events in a given RP. Options for trait fixation breeding strategies considered selfing and doubled haploid approaches to achieve homozygosity

  6. Strategy of penetration of renewable power resources in the Granma province, through Analytical Hierarchy Process

    International Nuclear Information System (INIS)

    Benítez Leyva, Lázaro Ventura; Rosa Andino, Alain Ariel de la; Jácome Cadena, Jaime Fernando; Paredes Palomeque, Cristian Rene

    2014-01-01

    In selecting new energy sources for a country, region or rural communities, the criteria to be considered conflict and it is difficult to determine the best energetic options as to preference and priority. Therefore, the present work had as objective to define a strategy of penetration of renewable energy sources from consultation of experts and the later application of the mathematical procedure ''Analytic Hierarchy Process''. The obtained results suggest that the energy strategies of better performance for the Granma province are the following: eolian energy for water pumping, solar photovoltaic for water pumping, solar thermal energy for the sector which demands hot water, and solar photovoltaic for the electrical sector, in that order of priority. (author)

  7. An integral design strategy combining optical system and image processing to obtain high resolution images

    Science.gov (United States)

    Wang, Jiaoyang; Wang, Lin; Yang, Ying; Gong, Rui; Shao, Xiaopeng; Liang, Chao; Xu, Jun

    2016-05-01

    In this paper, an integral design that combines optical system with image processing is introduced to obtain high resolution images, and the performance is evaluated and demonstrated. Traditional imaging methods often separate the two technical procedures of optical system design and imaging processing, resulting in the failures in efficient cooperation between the optical and digital elements. Therefore, an innovative approach is presented to combine the merit function during optical design together with the constraint conditions of image processing algorithms. Specifically, an optical imaging system with low resolution is designed to collect the image signals which are indispensable for imaging processing, while the ultimate goal is to obtain high resolution images from the final system. In order to optimize the global performance, the optimization function of ZEMAX software is utilized and the number of optimization cycles is controlled. Then Wiener filter algorithm is adopted to process the image simulation and mean squared error (MSE) is taken as evaluation criterion. The results show that, although the optical figures of merit for the optical imaging systems is not the best, it can provide image signals that are more suitable for image processing. In conclusion. The integral design of optical system and image processing can search out the overall optimal solution which is missed by the traditional design methods. Especially, when designing some complex optical system, this integral design strategy has obvious advantages to simplify structure and reduce cost, as well as to gain high resolution images simultaneously, which has a promising perspective of industrial application.

  8. Structural evolution of the SiO2-Ag system prepared by the Sol-gel process with incorporation of Ag particles

    Directory of Open Access Journals (Sweden)

    Garcia-Gonzalez, L.

    2011-02-01

    Full Text Available Structural evolution of Sol-Gel glasses in powder form and coatings with incorporation of Ag particles at the starting solution showed an evolution from SiO2 amorphous matrix to the cristobalite phase with the annealing treatment at around 800 ºC for one hour. This structural evolution was obtained at lower Ag concentration up 0.7 %vol. Two series of samples were studied, A series using HNO3 and B series using HCl as catalytic agent; in both series grenetine was used as a dispersing agent to avoid the precipitation of Ag particles. We found the incorporation of silver in the xerogeles matrix promotes the devitrification process at relatively low temperatures with the presence of partial crystallization in form of cistobalite. This structure was produced by controlling the catalytic agent quoted in the preparation process. The EPR and UV-Vis absorption spectra show the presence of Fe3+ ions as a contaminant in the source of the Ag particles, due to the process to obtain these particles. By means the IR spectra a high (OH- concentration at higher temperatures was observed in this system, until 600 ºC at difference of the sol-gel glasses made with incorporation of Ag particles by nitrates. The color evolution of the coating samples with the annealing temperature varies from a light brown at 100 ºC to yellow at 500 ºC.La evolución estructural de vidrios de Sol-Gel en forma de polvos y recubrimientos preparados con la incorporación de partículas de Ag a partir de la solución precursora muestra la evolución de la matriz amorfa de SiO2 a la fase cristobalita utilizando tratamientos térmicos alrededor de 800 °C por un tiempo de una hora. Dicha evolución estructural fue obtenida en concentraciones bajas a partir de 0.7% de Ag. Dos series de muestras fueron estudiadas, la serie A usando HNO3 y la serie B usando HCl como agente catalítico; en ambas series se uso grenetina como agente dispersante para evitar la precipitación de las part

  9. Open Land-Use Map: A Regional Land-Use Mapping Strategy for Incorporating OpenStreetMap with Earth Observations

    Science.gov (United States)

    Yang, D.; Fu, C. S.; Binford, M. W.

    2017-12-01

    The southeastern United States has high landscape heterogeneity, withheavily managed forestlands, highly developed agriculture lands, and multiple metropolitan areas. Human activities are transforming and altering land patterns and structures in both negative and positive manners. A land-use map for at the greater scale is a heavy computation task but is critical to most landowners, researchers, and decision makers, enabling them to make informed decisions for varying objectives. There are two major difficulties in generating the classification maps at the regional scale: the necessity of large training point sets and the expensive computation cost-in terms of both money and time-in classifier modeling. Volunteered Geographic Information (VGI) opens a new era in mapping and visualizing our world, where the platform is open for collecting valuable georeferenced information by volunteer citizens, and the data is freely available to the public. As one of the most well-known VGI initiatives, OpenStreetMap (OSM) contributes not only road network distribution, but also the potential for using this data to justify land cover and land use classifications. Google Earth Engine (GEE) is a platform designed for cloud-based mapping with a robust and fast computing power. Most large scale and national mapping approaches confuse "land cover" and "land-use", or build up the land-use database based on modeled land cover datasets. Unlike most other large-scale approaches, we distinguish and differentiate land-use from land cover. By focusing our prime objective of mapping land-use and management practices, a robust regional land-use mapping approach is developed by incorporating the OpenstreepMap dataset into Earth observation remote sensing imageries instead of the often-used land cover base maps.

  10. Development and implementation of FRESH--a post-secondary nutrition education program incorporating population strategies, experiential learning and intersectoral partnerships.

    Science.gov (United States)

    Matthews, June I; Zok, Anne V; Quenneville, Emily P M; Dworatzek, Paula D N

    2014-07-11

    The FRESH (Food Resources and Education for Student Health) peer nutrition education program engages undergraduate and graduate students in experiential learning to improve the campus food and nutrition environment and promote healthy behaviours among university students. University students in general, and graduate and undergraduate food and nutrition students as program designers and peer educators, respectively. Large university campus in southwestern Ontario. A peer nutrition education program, utilizing multiple population strategies and intersectoral partnerships, was created by and for university students with faculty and food service personnel as mentors. The population health strategies employed were building awareness and program branding; developing personal skills through peer nutrition education and hands-on cooking demonstrations; and creating supportive environments through incentive programs for fruit and dairy as well as point-of-purchase menu labelling. The program has reached students, staff and faculty through over 60 interactive FRESH displays and education sessions. Website and social media have also had a significant reach with over 4,000 website visits and 277 Facebook "likes". FRESH has also improved the food environment for over 5,000 students in residence, e.g., 1,931 FRESH Fruit/Dairy Cards have been returned for free fruit/milk cartons. Graduate students in Foods and Nutrition continue to participate every year (cumulative n=60) in ongoing program development. Peer educators have developed enhanced leadership, public speaking and group facilitation skills, and the ability to creatively apply what they have learned in the classroom to new contexts. Increased nutrition knowledge and an improved food environment could, over the long term, support improved university student health.

  11. Application of a novel integrated toxicity testing strategy incorporating "3R" principles of animal research to evaluate the safety of a new agrochemical sulfoxaflor.

    Science.gov (United States)

    Terry, Claire; Rasoulpour, Reza J; Saghir, Shakil; Marty, Sue; Gollapudi, B Bhaskar; Billington, Richard

    2014-05-01

    Plant protection products (PPPs) and the active substance(s) contained within them are rigorously and comprehensively tested prior to registration to ensure that human health is not impacted by their use. In recent years, there has been a widespread drive to have more relevant testing strategies (e.g., ILSI/HESI-ACSA and new EU Directives), which also take account of animal welfare, including the 3R (replacement, refinement, and reduction) principles. The toxicity potential of one such new active substance, sulfoxaflor, a sulfoximine insecticide (CAS #946578-00-3), was evaluated utilizing innovative testing strategies comprising: (1) an integrated testing scheme to optimize information obtained from as few animals as possible (i.e., 3R principles) through modifications of standard protocols, such as enhanced palatability study design, to include molecular endpoints, additional neurotoxicity and immunotoxicity parameters in a subchronic toxicity study, and combining multiple test guidelines into one study protocol; (2) generation of toxicokinetic data across dose levels, sexes, study durations, species, strains and life stages, without using satellite animals, which was a first for PPP development, and (3) addition of prospective mode of action (MoA) endpoints within repeat dose toxicity studies as well as proactive inclusion of specific MoA studies as an integral part of the development program. These novel approaches to generate key data early in the safety evaluation program facilitated informed decision-making on the need for additional studies and contributed to a more relevant human health risk assessment. This supplement also contains papers which describe in more detail the approach taken to establish the MoA and human relevance framework related to toxicities elicited by sulfoxaflor in the mammalian toxicology studies: developmental toxicity in rats mediated via the fetal muscle nicotinic acetylcholine receptor (nAChR) ( Ellis-Hutchings et al. 2014 ); liver

  12. Postprandial plasma betaine and other methyl donor-related responses after consumption of minimally processed wheat bran or wheat aleurone, or wheat aleurone incorporated into bread.

    Science.gov (United States)

    Keaveney, Edel M; Price, Ruth K; Hamill, Lesley L; Wallace, Julie M W; McNulty, Helene; Ward, Mary; Strain, J J; Ueland, Per M; Molloy, Anne M; Piironen, Vieno; von Reding, Walter; Shewry, Peter R; Ward, Jane L; Welch, Robert W

    2015-02-14

    The bran and particularly the aleurone fraction of wheat are high in betaine and other physiological methyl donors, which may exert beneficial physiological effects. We conducted two randomised, controlled, cross-over postprandial studies to assess and compare plasma betaine and other methyl donor-related responses following the consumption of minimally processed bran and aleurone fractions (study A) and aleurone bread (study B). For both studies, standard pharmacokinetic parameters were derived for betaine, choline, folate, dimethylglycine (DMG), total homocysteine and methionine from plasma samples taken at 0, 0·5, 1, 2 and 3 h. In study A (n 14), plasma betaine concentrations were significantly and substantially elevated from 0·5 to 3 h following the consumption of both bran and aleurone compared with the control; however, aleurone gave significantly higher responses than bran. Small, but significant, increases were also observed in DMG measures; however, no significant responses were observed in other analytes. In study B (n 13), plasma betaine concentrations were significantly and substantially higher following consumption of the aleurone bread compared with the control bread; small, but significant, increases were also observed in DMG and folate measures in response to consumption of the aleurone bread; however, no significant responses were observed in other analytes. Peak plasma betaine concentrations, which were 1·7-1·8 times the baseline levels, were attained earlier following the consumption of minimally processed aleurone compared with the aleurone bread (time taken to reach peak concentration 1·2 v. 2·1 h). These results showed that the consumption of minimally processed wheat bran, and particularly the aleurone fraction, yielded substantial postprandial increases in plasma betaine concentrations. Furthermore, these effects appear to be maintained when aleurone was incorporated into bread.

  13. [Key microbial processes in nitrous oxide emissions of agricultural soil and mitigation strategies].

    Science.gov (United States)

    Zhu, Yong-Guan; Wang, Xiao-Hui; Yang, Xiao-Ru; Xu, Hui-Juan; Jia, Yan

    2014-02-01

    Nitrous oxide (N2O) is a powerful atmospheric greenhouse gas, which does not only have a strong influence on the global climate change but also depletes the ozone layer and induces the enhancement of ultraviolet radiation to ground surface, so numerous researches have been focused on global climate change and ecological environmental change. Soil is the foremost source of N2O emissions to the atmosphere, and approximately two-thirds of these emissions are generally attributed to microbiological processes including bacterial and fungal denitrification and nitrification processes, largely as a result of the application of nitrogenous fertilizers. Here the available knowledge concerning the research progress in N2O production in agricultural soils was reviewed, including denitrification, nitrification, nitrifier denitrification and dissimilatory nitrate reduction to ammonium, and the abiotic (including soil pH, organic and inorganic nitrogen, organic matter, soil humidity and temperature) and biotic factors that have direct and indirect effects on N2O fluxes from agricultural soils were also summarized. In addition, the strategies for mitigating N2O emissions and the future research direction were proposed. Therefore, these studies are expected to provide valuable and scientific evidence for the study on mitigation strategies for the emission of greenhouse gases, adjustment of nitrogen transformation processes and enhancement of nitrogen use efficiency.

  14. Strategies for Enhancing Nonlinear Internal Model Control of pH Processes

    Energy Technology Data Exchange (ETDEWEB)

    Hu, Qiuping.; Rangaiah, G.P. [The National University of Singapore, Singapore (Singapore). Dept. of Chemical and Environmental Engineering

    1999-02-01

    Control of neutralization processes is very difficult due to nonlinear dynamics, different types of disturbances and modeling errors. The objective of the paper is to evaluate two strategies (augmented internal model control, AuIMC and adaptive internal model control, AdIMC) for enhancing pH control by nonlinear internal model control (NIMC). A NIMC controller is derived directly form input output linearization. The AuIMC is composed of NIMC and an additional loop through which the difference between the process and model outputs is fed back and added to the input of the controller. For the AdIMC, and adaptive law with two tuning parameters is proposed for estimating the unknown parameter. Both AuIMC and AdIMC are extensively tested via simulation for pH neutralization. The theoretical and simulation results show that both the proposed strategies can reduce the effect of modeling errors and disturbances, and thereby enhance the performance of NIMC for pH processes. (author)

  15. The impact of metacognitive strategies and self-regulating processes of solving math word problems

    Directory of Open Access Journals (Sweden)

    Eda Vula

    2017-09-01

    Full Text Available This empirical study investigates the impact of metacognitive strategies and self-regulating processes in learners’ achievement on solving math word problems. It specifically analyzes the impact of the linguistic factor and the number of steps and arithmetical operations that learners need to apply during the process of solving math word problems. Two hundred sixty-three learners, of three classes of third graders (N=130 and four classes of fifth graders (N=133 of the elementary cycle from two urban schools of Kosovo, participated in the study. Almost half of the total number of the third and fifth-graderswere exposed to metacognitive instruction. The rest of the learners were included in control classes in which they performed tasks without having been given any specific guidance, based exclusively on traditional methods and respective textbooks. All the learners were tested in math word problems twice, before the intervention and after it. Research findings have shown that metacognitive strategies and self-regulating processes that learners use to control their actions, to reason, and to reflect, are one of the main resources that influence their success in solving a math word problem. Although the difference between the pre-test and the post-test resultswas statistically significant solely with the fifth-grade experimental classes, yet an improved performance was observed in third-grade experimental learners’ classes compared to control classes. Theoretical and practical implications of the research are discussed in the end of the study.

  16. Organizational Lerning and Strategy: Information Processing Approach of Organizaitonal Learning to Perform Strategic Choice Analysis

    Directory of Open Access Journals (Sweden)

    Agustian Budi Prasetya

    2017-03-01

    Full Text Available Study of organizational learning required to discuss the issue of strategy to understand company’s organizational knowledge and how company applied the organizational knowledge toward the changing of the environment. Method of the analysis for this research was based on desk research thoroughly on the existing literature. This research analyzed the viewpoints of different researchers in organizational learning and elaborates the information processing abilities approach of Organizational Learning (OL. Based on desk research on literature, the research discussed information processing approach to explain organizational learning and strategy choice by describing the importance of information and assumptions, the activities of knowledge acquisition, interpreting and distribution of the knowledge, typology of exploitation and exploration learning. It proposed the importance of the company to perform alignment between internal managerial process arrangement and external environment while doing the learning, based on the strategic choice space, as theatrical clustering map of the learning, the fit, the alignment, and the alliances of the organization. This research finds that the strategic space might help the analysis of balancing between exploitation and exploration learning while applying the analysis of varied firm characteristics, strategic orientation, and industrial environments.

  17. Using empirical models of species colonization under multiple threatening processes to identify complementary threat-mitigation strategies.

    Science.gov (United States)

    Tulloch, Ayesha I T; Mortelliti, Alessio; Kay, Geoffrey M; Florance, Daniel; Lindenmayer, David

    2016-08-01

    Approaches to prioritize conservation actions are gaining popularity. However, limited empirical evidence exists on which species might benefit most from threat mitigation and on what combination of threats, if mitigated simultaneously, would result in the best outcomes for biodiversity. We devised a way to prioritize threat mitigation at a regional scale with empirical evidence based on predicted changes to population dynamics-information that is lacking in most threat-management prioritization frameworks that rely on expert elicitation. We used dynamic occupancy models to investigate the effects of multiple threats (tree cover, grazing, and presence of an hyperaggressive competitor, the Noisy Miner (Manorina melanocephala) on bird-population dynamics in an endangered woodland community in southeastern Australia. The 3 threatening processes had different effects on different species. We used predicted patch-colonization probabilities to estimate the benefit to each species of removing one or more threats. We then determined the complementary set of threat-mitigation strategies that maximized colonization of all species while ensuring that redundant actions with little benefit were avoided. The single action that resulted in the highest colonization was increasing tree cover, which increased patch colonization by 5% and 11% on average across all species and for declining species, respectively. Combining Noisy Miner control with increasing tree cover increased species colonization by 10% and 19% on average for all species and for declining species respectively, and was a higher priority than changing grazing regimes. Guidance for prioritizing threat mitigation is critical in the face of cumulative threatening processes. By incorporating population dynamics in prioritization of threat management, our approach helps ensure funding is not wasted on ineffective management programs that target the wrong threats or species. © 2016 Society for Conservation Biology.

  18. A process for developing multisectoral strategies for zoonoses: the case of leptospirosis in Fiji.

    Science.gov (United States)

    Reid, Simon A; Rodney, Anna; Kama, Mike; Hill, Peter S

    2017-08-22

    Zoonotic diseases such as leptospirosis occur as a result of the often complex interactions that exist at the human-animal-environment interface. The most obvious consequence of this complexity is the need for the health sector to partner with institutions in other sectors of society such as agriculture, labour and local government. This multisectoral engagement is complicated by the different agendas and cultures of the various institutions and their ability to "see" their role and ant benefits in a collaborative response. The research used a realist review methodology combined with systems thinking frameworks to determine the optimal strategy and governance for the prevention and control of leptospirosis in Fiji. The process included facilitated workshops with multiple stakeholders to determine the needs, issues and potential interventions that was guided by a synthesis of locally available data and information on the impact of leptospirosis. This process was informed by interviews with bureaucrats from different government ministries. Stakeholders concurred that leptospirosis generally only received wide-spread attention in outbreaks, when there is media coverage of deaths or a large number of hospitalisations. In general, all ministries expressed support for a multisectoral strategy but saw the Ministry of Health and Medical Services as the lead agency with overall responsibility. The final consultation workshop yielded a clearly articulated goal to reduce the case fatality rate attributable to leptospirosis by 50% by 2020 and 4 overarching strategies: 1) improved clinical management of leptospirosis, 2) improved surveillance for leptospirosis, 3) enhanced communication to minimise risk and improve health seeking behaviours, and 4) strengthening coordination and governance structures. Human mortality and morbidity remained the primary drive for government action, defining leptospirosis as a human health problem. The process of deliberative consultation, and the

  19. Looking at My Own Face: Visual Processing Strategies in Self–Other Face Recognition

    Directory of Open Access Journals (Sweden)

    Anya Chakraborty

    2018-02-01

    Full Text Available We live in an age of ‘selfies.’ Yet, how we look at our own faces has seldom been systematically investigated. In this study we test if the visual processing of the highly familiar self-face is different from other faces, using psychophysics and eye-tracking. This paradigm also enabled us to test the association between the psychophysical properties of self-face representation and visual processing strategies involved in self-face recognition. Thirty-three adults performed a self-face recognition task from a series of self-other face morphs with simultaneous eye-tracking. Participants were found to look longer at the lower part of the face for self-face compared to other-face. Participants with a more distinct self-face representation, as indexed by a steeper slope of the psychometric response curve for self-face recognition, were found to look longer at upper part of the faces identified as ‘self’ vs. those identified as ‘other’. This result indicates that self-face representation can influence where we look when we process our own vs. others’ faces. We also investigated the association of autism-related traits with self-face processing metrics since autism has previously been associated with atypical self-processing. The study did not find any self-face specific association with autistic traits, suggesting that autism-related features may be related to self-processing in a domain specific manner.

  20. Belles-Lettres Reading Strategies in the Process of Foreign Language Teaching

    Directory of Open Access Journals (Sweden)

    Alexander S. Komarov

    2015-01-01

    Full Text Available The article is devoted to some of the teaching strategies based on the peculiarities of belles-lettres text. The author of the article analyses the peculiarities of the belles-lettres text which exert influence on the process of teaching reading skills and thus should be taken into account by foreign language teachers in their work with this type of text. The author argues that teaching belles-lettres reading skills should be centered on the five-level communication process between writer and reader. The teacher's aim is to create or adjust a system of reading instruction within the five levels so that he/she could improve students' reading skills. In the article, it is stated that the process of teaching reading skills should be congruent with the process of interpersonal communication between writer and reader. The author outlines the content of the teacher's approach to the work with this type of text within the process of foreign language instruction. The author describes two approaches to teaching belles-lettres reading skills as well as shows the prospects for the subjective approach. He also states high productivity and effectiveness of the subjective approach in teaching foreign languages. The article shows the importance of involving students who specialize in sciences into the process of belles-lettres reading while studying a foreign language for specific purposes.

  1. Polymeric Nanocomposite Membranes for Next Generation Pervaporation Process: Strategies, Challenges and Future Prospects.

    Science.gov (United States)

    Roy, Sagar; Singha, Nayan Ranjan

    2017-09-08

    Pervaporation (PV) has been considered as one of the most active and promising areas in membrane technologies in separating close boiling or azeotropic liquid mixtures, heat sensitive biomaterials, water or organics from its mixtures that are indispensable constituents for various important chemical and bio-separations. In the PV process, the membrane plays the most pivotal role and is of paramount importance in governing the overall efficiency. This article evaluates and collaborates the current research towards the development of next generation nanomaterials (NMs) and embedded polymeric membranes with regard to its synthesis, fabrication and application strategies, challenges and future prospects.

  2. Polymeric Nanocomposite Membranes for Next Generation Pervaporation Process: Strategies, Challenges and Future Prospects

    Directory of Open Access Journals (Sweden)

    Sagar Roy

    2017-09-01

    Full Text Available Pervaporation (PV has been considered as one of the most active and promising areas in membrane technologies in separating close boiling or azeotropic liquid mixtures, heat sensitive biomaterials, water or organics from its mixtures that are indispensable constituents for various important chemical and bio-separations. In the PV process, the membrane plays the most pivotal role and is of paramount importance in governing the overall efficiency. This article evaluates and collaborates the current research towards the development of next generation nanomaterials (NMs and embedded polymeric membranes with regard to its synthesis, fabrication and application strategies, challenges and future prospects.

  3. Software Prototyping: A Strategy to Use When User Lacks Data Processing Experience

    OpenAIRE

    Peter M Ogedebe; Babatunde Peter Jacob

    2012-01-01

    A prototype is a working physical model of a system and it serves as a preliminary version of the system. One of the major challenges faced by developers is to know when to use prototype and when not to. This is so considering that there are many disagreements among developers on the proper use of prototyping. This study looked at the question “Is prototyping the best strategy to use when the user lacks data processing?” There is an accepted assumption about users by application developers; t...

  4. Possible mechanism of structural incorporation of Al into diatomite during the deposition process I. Via a condensation reaction of hydroxyl groups.

    Science.gov (United States)

    Liu, Dong; Yu, Wenbin; Deng, Liangliang; Yuan, Weiwei; Ma, Lingya; Yuan, Peng; Du, Peixin; He, Hongping

    2016-01-01

    The structural incorporation of aluminium (Al) into diatomite is investigated by preparing several Al-diatomite composites by loading an Al precursor, hydroxyl aluminum polymer (Al13), onto the surface of diatomite and heating at various temperatures. The results indicate that Al was incorporated and implanted into the structure of diatomite by the condensation reaction of the hydroxyl groups of Al13 and diatomite, and the Si-O-Al(OH) groups were formed during the condensation reaction. Al incorporation by the condensation reaction of hydroxyl groups of Al13 with single silanols of diatomite occurred more readily than that with geminal silanols. The Al incorporation increased solid acidity of diatomite after Al incorporation. The acidity improvement was various for different types of acid sites, depending on the preparation temperature of the Al-incorporated diatomite. Both Brønsted and Lewis acid sites increased greatly after heating at 250 and 350 °C, but only L acid sites significantly improved after heating at 500 °C. These results demonstrate that the structural incorporation of Al(3+) ions into diatomite can occur by the condensation reaction of the hydroxyl groups of the Al precursors and diatomite. Moreover, the rich solid acid sites of Al-incorporated diatomite show its promising application as a solid acid catalyst. Copyright © 2015 Elsevier Inc. All rights reserved.

  5. An optimal retrieval, processing, and blending strategy for immobilization of Hanford high-level tank waste

    International Nuclear Information System (INIS)

    Hoza, M.

    1996-01-01

    Hanford tank waste will be separated into high-level and low-level portions; each portion will then be vitrified (other waste forms are also being considered for low-level waste) to produce a stable glass form for disposal. Because of the wide variability in the tank waste compositions, blending is being considered as a way to reduce the number of distinct compositions that must be vitrified and to minimize the resultant volume of vitrified waste. Three years of computational glass formulation and blending studies have demonstrated that blending of the high-level waste before vitrification can reduce the volume of high-level waste glass required by as much as 50 percent. This level of reduction would be obtained if all the high-level waste were blended together (Total Blend) prior to vitrification, requiring the retrieval and pretreatment of all tank waste before high-level vitrification was started. This paper will present an overall processing strategy that should be able to match the blending performance of the Total Blend and be more logistically feasible. The strategy includes retrieving, pretreating, blending and vitrifying Hanford tank waste. This strategy utilizes blending both before and after pretreatment. Similar wastes are blended before pretreatment, so as not to dilute species targeted for removal. The high-level portions of these pretreated early blends are then selectively blended to produce a small number of high-level vitrification feed streams

  6. Evaluating water management strategies in watersheds by new hybrid Fuzzy Analytical Network Process (FANP) methods

    Science.gov (United States)

    RazaviToosi, S. L.; Samani, J. M. V.

    2016-03-01

    Watersheds are considered as hydrological units. Their other important aspects such as economic, social and environmental functions play crucial roles in sustainable development. The objective of this work is to develop methodologies to prioritize watersheds by considering different development strategies in environmental, social and economic sectors. This ranking could play a significant role in management to assign the most critical watersheds where by employing water management strategies, best condition changes are expected to be accomplished. Due to complex relations among different criteria, two new hybrid fuzzy ANP (Analytical Network Process) algorithms, fuzzy TOPSIS (Technique for Order Preference by Similarity to Ideal Solution) and fuzzy max-min set methods are used to provide more flexible and accurate decision model. Five watersheds in Iran named Oroomeyeh, Atrak, Sefidrood, Namak and Zayandehrood are considered as alternatives. Based on long term development goals, 38 water management strategies are defined as subcriteria in 10 clusters. The main advantage of the proposed methods is its ability to overcome uncertainty. This task is accomplished by using fuzzy numbers in all steps of the algorithms. To validate the proposed method, the final results were compared with those obtained from the ANP algorithm and the Spearman rank correlation coefficient is applied to find the similarity in the different ranking methods. Finally, the sensitivity analysis was conducted to investigate the influence of cluster weights on the final ranking.

  7. Improving everyday prospective memory performance in older adults: comparing cognitive process and strategy training.

    Science.gov (United States)

    Brom, Sarah Susanne; Kliegel, Matthias

    2014-09-01

    Considering the importance of prospective memory for independence in old age recently, research has started to examine interventions to reduce prospective memory errors. Two general approaches can be proposed: (a) process training of executive control associated with prospective memory functioning, and/or (b) strategy training to reduce executive task demands. The present study was the first to combine and compare both training methods in a sample of 62 community-dwelling older adults (60-86 years) and to explore their effects on an ecologically valid everyday life prospective memory task (here: regular blood pressure monitoring). Even though the training of executive control was successful in enhancing the trained ability, clear transfer effects on prospective memory performance could only be found for the strategy training. However, participants with low executive abilities benefited particularly from the implementation intention strategy. Conceptually, this supports models suggesting interactions between task demands and individual differences in executive control in explaining individual differences in prospective memory performance. PsycINFO Database Record (c) 2014 APA, all rights reserved.

  8. Applying Business Process Re-Engineering to Public Sector as A New Public Management Strategy

    Directory of Open Access Journals (Sweden)

    Ropinder Oberoi

    2013-08-01

    Full Text Available The introduction of Business Process Reengineering (BPR to the public sector follows the much broader trend of New Public Management. BPR in the public sector mostly means amalgamation of business processes, computerization of various activities and removal of some unnecessary ones. BPR assimilates a radical premeditated scheme of business pro-cess reengineering and an additional progressive technique of uninterrupted process improvement with adequate information technology (IT and e-business infrastructure strategies. Public organizations have specific and exclusive features that differentiae-ate them from private sector organizations. Based on the literature review and examining of study find-ings, it is argued that a public sector organization can employ BPR to get better its process and overall organizational performance, if it (1 has accrues a collection of BPR-relevant resources and capabilities; (2 has embarked on BPR with adequate depth and breadth; (3 is developing a post-BPR complementary set of skills, systems and technologies, which are essential to further develop the organizational impact of the BPR; and (4 has successfully mitigated the effects of BPR implementation problems. In addition to its effect on administration and ser-vice delivery processes through reduction of the processing time, work steps and cost of government processes, BPR also contributes to enhancing citizen/customer and employee satisfaction, increasing organizational transparency and responsiveness which have also become an essential objective of New Public Management. Therefore, public sector BPR is emerging as an indispensable to performance of organizations in the developing economy. The essential questions addressed in this paper are: What are the scenario and impending problems of reengineering applications in the public sector? Can it be functional for the public sector in attending to frequent problems blockading bureaucracies of developed and

  9. Implications of Industrial Processing Strategy on Cellulosic Ethanol Production at High Solids Concentrations

    DEFF Research Database (Denmark)

    Cannella, David

    The production of cellulosic ethanol is a biochemical process of not edible biomasses which contain the cellulose. The process involves the use of enzymes to hydrolyze the cellulose in fermentable sugars to finally produce ethanol via fermentative microorganisms (i.e. yeasts). These biomasses...... are the leftover of agricultural productions (straws), not edible crops (giant reed) or wood, thus the ethanol so produced is also called second generation (or 2G ethanol), which differs from the first generation produced from starch (sugar beets mostly). In the industrial production of cellulosic ethanol high...... solids strategy resulted critical for its cost effectiveness: high concentration of initial biomass it will lead to high concentration of the final product (ethanol), thus more convenient to isolate. This thesis investigate the implementation of a high solids loading concept into cellulosic ethanol...

  10. The Energy Integration Strategies in the Great Caribbean: Multiple Processes and Regional Leadership in Dispute

    Directory of Open Access Journals (Sweden)

    María Camila Moncada Guevara

    2016-01-01

    Full Text Available The purpose of this article is to demonstrate, through the paradigm of the complex interdependency that the energy integration processes in the Caribbean during the 21st Century have been multiple, given the integrationist traditions and the strategic regional leadership interests displayed by Venezuela, Mexico and the United States. Therefore, gendas proposed to supply the energy demand in the region deepen the existence of hegemonic projects in dispute. In the first part, political, economic and military aspects of the integration processes in the Caribbean are defined. Then, energy agendas of the 90’s with the Hemisphere Integration Strategy are characterized. Finally, the most recent experience of CARICOM on the matter is analyzed and it is concluded that the region is going through a period of recomposition of the regional powers.

  11. A nutribusiness strategy for processing and marketing animal-source foods for children.

    Science.gov (United States)

    Mills, Edward W; Seetharaman, Koushik; Maretzki, Audrey N

    2007-04-01

    Nutritional benefits of animal source foods in the diets of children in developing countries indicate a need to increase the availability of such foods to young children. A nutribusiness strategy based on a dried meat and starch product could be used to increase children's access to such foods. The "Chiparoo" was developed at The Pennsylvania State University with this objective in mind. Plant-based and meat ingredients of the Chiparoo are chosen based on regional availability and cultural acceptability. Chiparoo processing procedures, including solar drying, are designed to ensure product safety and to provide product properties that allow them to be eaten as a snack or crumbled into a weaning porridge. Continued work is needed to develop formulation and processing variations that accommodate the needs of cultures around the world.

  12. Ethanol from Cellulosic Biomass with Emphasis of Wheat Straw Utilization. Analysis of Strategies for Process Development

    Directory of Open Access Journals (Sweden)

    Alexander Dimitrov Kroumov

    2015-12-01

    Full Text Available The "Green and Blue Technologies Strategies in HORIZON 2020" has increased the attention of scientific society on global utilization of renewable energy sources. Agricultural residues can be a valuable source of energy because of drastically growing human needs for food. The goal of this review is to show the current state of art on utilization of wheat straw as a substrate for ethanol production. The specifics of wheat straw composition and the chemical and thermodynamic properties of its components pre-determined the application of unit operations and engineering strategies for hydrolysis of the substrate and further its fermentation. Modeling of this two processes is crucially important for optimal overall process development and scale up. The authors gave much attention on main hydrolisis products as a glucose and xylose (C6 and C5 sugars, respectivelly and on the specifics of their metabolization by ethanol producing microorganisms. The microbial physiology reacting on C6 and C5 sugars and mathematical aproaches describing these phenomena are discussing, as well.

  13. Different letter-processing strategies in diagnostic subgroups of developmental dyslexia.

    Science.gov (United States)

    Lachmann, Thomas; van Leeuwen, Cees

    2008-07-01

    Normally reading adults (N = 15) and primary school children (N = 24) and two diagnostic subgroups of children with developmental dyslexia (N = 21)-all native German speakers-performed a successive same-different task with pairs of letters and nonletters (pseudoletters or geometrical shapes). The first item of a pair was always presented on its own, and the second either on its own or surrounded by a congruent or incongruent nontarget shape. Adults showed congruence effects with nonletters but not with letters, and children with both types of stimuli. Frequent-word reading-impaired dyslexics (N = 11) in addition showed dramatically slower overall reaction times. Nonword reading-impaired dyslexics (N = 10) showed congruence effects with nonletters but negative congruence effects with letters. The results support the notion that normal readers have established a special visual processing strategy for letters. Processing speed rather than reading expertise seems crucial for this strategy to emerge. The contrasting effects between subgroups of dyslexics reveal specific underlying deficits.

  14. Start-Up and Aeration Strategies for a Completely Autotrophic Nitrogen Removal Process in an SBR

    Directory of Open Access Journals (Sweden)

    Xiaoling Zhang

    2017-01-01

    Full Text Available The start-up and performance of the completely autotrophic nitrogen removal via nitrite (CANON process were examined in a sequencing batch reactor (SBR with intermittent aeration. Initially, partial nitrification was established, and then the DO concentration was lowered further, surplus water in the SBR with high nitrite was replaced with tap water, and continuous aeration mode was turned into intermittent aeration mode, while the removal of total nitrogen was still weak. However, the total nitrogen (TN removal efficiency and nitrogen removal loading reached 83.07% and 0.422 kgN/(m3·d, respectively, 14 days after inoculating 0.15 g of CANON biofilm biomass into the SBR. The aggregates formed in SBR were the mixture of activated sludge and granular sludge; the volume ratio of floc and granular sludge was 7 : 3. DNA analysis showed that Planctomycetes-like anammox bacteria and Nitrosomonas-like aerobic ammonium oxidization bacteria were dominant bacteria in the reactor. The influence of aeration strategies on CANON process was investigated using batch tests. The result showed that the strategy of alternating aeration (1 h and nonaeration (1 h was optimum, which can obtain almost the same TN removal efficiency as continuous aeration while reducing the energy consumption, inhibiting the activity of NOB, and enhancing the activity of AAOB.

  15. Learning processes of students pre-vocational secondary education: relations between goal orientations, information processing strategies and development of conceptual knowledge

    NARCIS (Netherlands)

    Koopman, M.; Brok, den P.J.; Beijaard, D.; Teune, P.J.

    2011-01-01

    The purpose of this study was to investigate relations between goal orientations, information processing strategies and development of conceptual knowledge of pre-vocational secondary education students (n = 719; 14 schools). Students' preferences for certain types of goals and information

  16. Strategies for the decision process of siting radioactive waste repositories concerning communication and interaction with the society

    International Nuclear Information System (INIS)

    Almeida, Ivan Pedro Salati de

    2009-01-01

    The objective of this paper is to discuss the strategies to be followed in the siting and construction process of radioactive waste repositories considering the communication and relationship with the society. The paper analyzes the prospective advantages and disadvantages of each type of strategy. The strategies can be classified under three different types: 'define, announce and defend' strategy (also called DAD), participative strategy and spontaneous candidacy of host community. Up to the 90s the most common way of construct repositories was the DAD strategy. This type of strategy, despite of some cases of success, is gradually facing opposition in democratic regimes. Examples of failure are the first attempt to construct the Hungarian repository from 1982 to 1990; the French attempt of the construction of high and intermediate waste repository from 1987 to 1989 (both cancelled and substituted by the participative approach) and even the recent discussion to freeze the implantation of the Yucca Mountain repository in United States. The participative strategy has been preferred currently by most of the new repositories projects. Examples are the second attempt in Hungary, the construction of a repository in Slovenia and in the United Kingdom. The participative strategy has the disadvantage of greater expenses at the beginning of the process until the site of the repository is defined. This occurs because the body responsible for the construction has to deal with several potential candidates and spend time and money in the communication and participation process until the definition of the site by technical, economical and social criteria. On the other hand, this process decreases the risk of rejection by the local population. The spontaneous candidacy strategy was also analyzed and it is shown it has some similarities with the participative strategy but hides new risks in the process. (author)

  17. Embedded Prompting May Function as Embedded Punishment: Detection of Unexpected Behavioral Processes within a Typical Preschool Teaching Strategy

    Science.gov (United States)

    Heal, Nicole A.; Hanley, Gregory P.

    2011-01-01

    This study describes an unexpected behavioral process that influenced behavior during the teaching of concepts to a 4-year-old girl. The efficacy of and preference for three strategies that varied in teacher directedness were assessed in a multielement design and concurrent-chains arrangement, respectively. The strategy that involved the most…

  18. Feedback Providing Improvement Strategies and Reflection on Feedback Use: Effects on Students' Writing Motivation, Process, and Performance

    Science.gov (United States)

    Duijnhouwer, Hendrien; Prins, Frans J.; Stokking, Karel M.

    2012-01-01

    This study investigated the effects of feedback providing improvement strategies and a reflection assignment on students' writing motivation, process, and performance. Students in the experimental feedback condition (n = 41) received feedback including improvement strategies, whereas students in the control feedback condition (n = 41) received…

  19. Neural bases of different cognitive strategies for facial affect processing in schizophrenia.

    Science.gov (United States)

    Fakra, Eric; Salgado-Pineda, Pilar; Delaveau, Pauline; Hariri, Ahmad R; Blin, Olivier

    2008-03-01

    To examine the neural basis and dynamics of facial affect processing in schizophrenic patients as compared to healthy controls. Fourteen schizophrenic patients and fourteen matched controls performed a facial affect identification task during fMRI acquisition. The emotional task included an intuitive emotional condition (matching emotional faces) and a more cognitively demanding condition (labeling emotional faces). Individual analysis for each emotional condition, and second-level t-tests examining both within-, and between-group differences, were carried out using a random effects approach. Psychophysiological interactions (PPI) were tested for variations in functional connectivity between amygdala and other brain regions as a function of changes in experimental conditions (labeling versus matching). During the labeling condition, both groups engaged similar networks. During the matching condition, schizophrenics failed to activate regions of the limbic system implicated in the automatic processing of emotions. PPI revealed an inverse functional connectivity between prefrontal regions and the left amygdala in healthy volunteers but there was no such change in patients. Furthermore, during the matching condition, and compared to controls, patients showed decreased activation of regions involved in holistic face processing (fusiform gyrus) and increased activation of regions associated with feature analysis (inferior parietal cortex, left middle temporal lobe, right precuneus). Our findings suggest that schizophrenic patients invariably adopt a cognitive approach when identifying facial affect. The distributed neocortical network observed during the intuitive condition indicates that patients may resort to feature-based, rather than configuration-based, processing and may constitute a compensatory strategy for limbic dysfunction.

  20. Streamlining the process: A strategy for making NEPA work better and cost less

    Energy Technology Data Exchange (ETDEWEB)

    Hansen, R.P.; Hansen, J.D. [Hansen Environmental Consultants, Englewood, CO (United States); Wolff, T.A. [Sandia National Labs., Albuquerque, NM (United States)

    1998-05-01

    When the National Environmental Policy Act (NEPA) was enacted in 1969, neither Congress nor the Federal Agencies affected anticipated that implementation of the NEPA process would result in the intolerable delays, inefficiencies, duplication of effort, commitments of excessive financial and personnel resources, and bureaucratic gridlock that have become institutionalized. The 1975 Council on Environmental Quality (CEQ) regulations, which were intended to make the NEPA process more efficient and more useful to decision makers and the public, have either been largely ignored or unintentionally subverted. Agency policy mandates, like those of former Secretary of Energy Hazel R. O`Leary, to ``make NEPA work better and cost less`` have, so far, been disappointingly ineffectual. Federal Agencies have reached the point where almost every constituent of the NEPA process must be subjected to crisis management. This paper focuses on a ten-point strategy for streamlining the NEPA process in order to achieve the Act`s objectives while easing the considerable burden on agencies, the public, and the judicial system. How the ten points are timed and implemented is critical to any successful streamlining.

  1. IT Alignment in SMEs: Should it be with Strategy or Process?

    Directory of Open Access Journals (Sweden)

    Alejandro Cataldo

    2015-11-01

    Full Text Available For many years researchers have been concerned about the alignment of Information Technology (IT in businesses. Most of the published research has been focused on understanding the alignment of IT with strategy, but a more recent view is that IT alignment with processes would be better, especially for SMEs. This research presents the two different approaches to measuring IT alignment, then uses the case of a small dental clinic to contribute to understanding these two alternative approaches. The results showed that both strategic alignment and process alignment were important, but strategic guidelines set the framework for the use of IT in the processes. These results contradict the claims of researchers who defend the process approach. This work has implications for practitioners because it again highlights the importance of IT in a strategic context in SMEs. This research also contributes to the theory of IT alignment in SMEs, and we hope this will encourage other researchers to study which approach is best suited for this type of business.

  2. A Long-Term Tourism Strategy within a Networked Urban Regeneration Process for Historical Quarters

    Directory of Open Access Journals (Sweden)

    Han Jie

    2012-12-01

    Full Text Available During 1970s, the de-industrialization in many western countries caused large unemployment and decay of industrial cities. Accordingly, as an urban revitalization strategy, tourism was initiated in many urban historical quarters to revitalize the economy and to improve the decaying city image. Many de-industrialized cities witnessed the rise of place marketing-led tourism in historical quarters. Many quarters have removed and replaced the existing residents and original functions which were thought to convey negative images. Meanwhile, new images and attractions, including museums, crafts, arts, cultural heritage, and festivals have been introduced in these empty physical fabrics to attract investors and tourists. More recently, the strategy of tourism development tends to be closely related with other urban planning strategies, especially in historical quarters’ revitalization process, which usually link tourism with other development strategies such as cultural industry and creative industry (Tiesdell et al., 1996, Cunningham, 2002 to transform these quarters into cultural hubs or creative dismissions (Roodhouse, 2010, aiming to attract not only tourists but also local people, enhance the quarters’ cultural ambience, and promote local cultural production consumption without emptying all the residents and functions. In recent decades, many Chinese cities have experienced huge urban changes. With many urban historical quarters being demolished to gain development profits and new city image, many old neighbourhoods collapsed with their residents relocated to frontier areas. This paper conducts a comparative study on recent creative hub initiated by Shanghai government—Tianzi Fang and the Xi’an Muslim Quarter. It analyzes the recycling mode, the everyday life , the experience of uniqueness, and social network based on the two cases. It also explores the tensions, conflicts, and cooperation within the network of disciplines, governmental

  3. Optimization of a Gas Switching Combustion process through advanced heat management strategies

    International Nuclear Information System (INIS)

    Cloete, Schalk; Zaabout, Abdelghafour; Romano, Matteo C.; Chiesa, Paolo; Lozza, Giovanni; Gallucci, Fausto; Sint Annaland, Martin van; Amini, Shahriar

    2017-01-01

    Highlights: • GSC is a promising new reactor concept for power production with cost effective CO 2 capture. • The standalone fluidized bed reactors employed will allow for easy process scale-up. • The GSC simple configuration achieves higher efficiencies than conventional solutions. • Further increases in efficiency can be achieved via advanced heat management. • The 41.9% maximum efficiency is in line with other CLC–IGCC configurations. - Abstract: Gas Switching Combustion (GSC) is a promising new process concept for energy efficient power production with integrated CO 2 capture. In comparison to conventional Chemical Looping Combustion (CLC) carried out in interconnected fluidized beds, the GSC concept will be substantially easier to design and scale up, especially for pressurized conditions. One potential drawback of the GSC concept is the gradual temperature variation over the transient process cycle, which leads to a drop in electric efficiency of the plant. This article investigates heat management strategies to mitigate this issue both through simulations and experiments. Simulation studies of the GSC concept integrated into an IGCC power plant show that heat management using a nitrogen recycle stream can increase plant efficiency by 3 percentage points to 41.6% while maintaining CO 2 capture ratios close to 90%. Reactive multiphase flow simulations of the GSC reactor also showed that heat management can eliminate fuel slip problems. In addition, the GSC concept offers the potential to remove the need for a nitrogen recycle stream by implementing a concentrated air injection that extracts heat while only a small percentage of oxygen reacts. Experiments have shown that, similar to nitrogen recycle, this strategy reduces transient temperature variations across the cycle and therefore merits further investigation.

  4. The genome sequence of the outbreeding globe artichoke constructed de novo incorporating a phase-aware low-pass sequencing strategy of F1 progeny

    Science.gov (United States)

    Scaglione, Davide; Reyes-Chin-Wo, Sebastian; Acquadro, Alberto; Froenicke, Lutz; Portis, Ezio; Beitel, Christopher; Tirone, Matteo; Mauro, Rosario; Lo Monaco, Antonino; Mauromicale, Giovanni; Faccioli, Primetta; Cattivelli, Luigi; Rieseberg, Loren; Michelmore, Richard; Lanteri, Sergio

    2016-01-01

    Globe artichoke (Cynara cardunculus var. scolymus) is an out-crossing, perennial, multi-use crop species that is grown worldwide and belongs to the Compositae, one of the most successful Angiosperm families. We describe the first genome sequence of globe artichoke. The assembly, comprising of 13,588 scaffolds covering 725 of the 1,084 Mb genome, was generated using ~133-fold Illumina sequencing data and encodes 26,889 predicted genes. Re-sequencing (30×) of globe artichoke and cultivated cardoon (C. cardunculus var. altilis) parental genotypes and low-coverage (0.5 to 1×) genotyping-by-sequencing of 163 F1 individuals resulted in 73% of the assembled genome being anchored in 2,178 genetic bins ordered along 17 chromosomal pseudomolecules. This was achieved using a novel pipeline, SOILoCo (Scaffold Ordering by Imputation with Low Coverage), to detect heterozygous regions and assign parental haplotypes with low sequencing read depth and of unknown phase. SOILoCo provides a powerful tool for de novo genome analysis of outcrossing species. Our data will enable genome-scale analyses of evolutionary processes among crops, weeds, and wild species within and beyond the Compositae, and will facilitate the identification of economically important genes from related species. PMID:26786968

  5. Strategy for integration of coastal culture in learning process of mathematics in junior high school

    Science.gov (United States)

    Suyitno, H.; Zaenuri; Florentinus, T. S.; Zakaria, E.

    2018-03-01

    Traditional life in the fishing family is part of the local culture. Many School-age children in the fishing family drop-outs due to lack of parents motivation and the environment was less supportive. The problems were: (1) How the strategy of integration of local culture in learning process of mathematics in Junior High School (JHS)? (2) How to prepare the Mathematics Student’s Book for grade 7 of JHS that based on coastal culture, that has an ISBN, has international level, applicable, and in accordance with the current curriculum? The purposes of this research were: (1) to obtain the strategy of integration of local culture in learning process of mathematics in JHS, through FGD between UNNES and UKM; (2) to obtain the experts validation, through Focus Group Discussion (FGD) between UNNES and UKM toward the draft of the Mathematics Student’s Book for grade 7 of JHS that based on coastal culture; (3) produces Mathematics Student’s Book for grade 7 SMP which based on coastal culture and has an ISBN, international, applicable, and in accordance with the curriculum. The research activity was a qualitative research, so that the research methods include: (1) data reduction, (2) display data, (3) data interpretation, and (4) conclusion/verification. The main activities of this research: drafting the Mathematics Student’s Book of Grade 7 which based on coastal culture; get the validation from international partners;conducting FGD at Education Faculty of Universiti Kebangsaan Malaysia through the program of visiting lecturers for getting the Mathematics Student’s Book of grade 7 which based on coastal culture, registering for ISBN, and publishing the reasearch results in International seminar and International Journals. The results of this research were as follows. (1) Getting a good strategy for integration of local culture in learning process of mathematics in JHS. (2) Getting the Mathematics Student’s Book for grade 7 of JHS that based on coastal culture

  6. Criteria for method selection and process design of a technical development strategy

    CSIR Research Space (South Africa)

    Joseph-Malherbe, S

    2012-08-01

    Full Text Available delivery strategy and a testing strategy with the associated approach and methods for each strategy. For example, the testing strategy will describe the testing approach of the system development cycle and it will include methods of testing, testing...

  7. Improving the Functional Diagnostic Process using Dynamic Master Logic Diagram (DMLD) Modeling Strategy

    International Nuclear Information System (INIS)

    Mohamed, A.H.

    2008-01-01

    In recent years, state based functional diagnostic systems have gained a growing attention among the model based diagnostic systems. They have been used to diagnose the new faults of the complex systems. On the other hand, a main point considered against it is its subjective, and the inability of reusing the knowledge gathered from one engineer by others. Different methods have been' suggested to solve these problems. In the same way, the suggested functional diagnostic system introduces the uses of Dynamic Master Logic Diagram (DMLD) modeling strategy for the functional diagnostic systems. DMLD has proven its power as a good modeling strategy. It can model the functions of the system's components in terms of a set of defined primitives for the domain of applications. However, the suggested system can use the DMLD technique to model the small functions of the system according to the defined primitives of its domain. So, the modeling process of the system is relatively invariant from one modeler to another. Also, the functions defined can be reused by other users in the domain for solving different problems. Besides, it can deal with the complex system in a flexible manner. Thus, the proposed system can improve the performance of the state based functional diagnostic systems. It can be applied for a wide area of the complex systems. It has been applied for a fluid system as a case of the real-time systems. The suggested system has proved its success as a powerful practical state based functional diagnostic system

  8. A Feeding Strategy in Inner L-Shape Ring Hot Rolling Process

    Directory of Open Access Journals (Sweden)

    Wen Meng

    2017-01-01

    Full Text Available In order to make the inner L-shape ring polling process with a closed die structure (ILRRCDS on the top and bottom of the driven roll stable, at first, this paper established the mathematical model for ILRRCDS. Then, the plastic penetration and biting-in conditions for ILRRCDS were deduced based on plain ring rolling theory. Moreover, a feeding strategy that can realize a constant growth of the ring’s outer radius was proposed and the reasonable value ranges of the feed rate of the mandrel were determined. The numerical simulation model for ILRRCDS is established based on ABAQUS software. Finally, the equivalent plastic strain (PEEQ and temperature distributions of rolled ring were obtained. The results indicated that the proposed feeding strategy can realize a stable ILRRCDS. At the end of ILRRCDS, the PEEQ at the inner radius surface of the ring is maximum, the PEEQ at the outer radius surface of the ring takes the second place, and the PEEQ at the middle part of ring is minimum. With the increase of rolling time, the higher temperature zone of the rolled ring gradually moves from the center part of the ring to the “inner corner zone” of the ring.

  9. A pilot scale demonstration of the DWPF process control and product verification strategy

    International Nuclear Information System (INIS)

    Hutson, N.D.; Jantzen, C.M.; Beam, D.C.

    1992-01-01

    The Defense Waste Processing Facility (DWPF) has been designed and constructed to immobilize Savannah River Site high level liquid waste within a durable borosilicate glass matrix for permanent storage. The DWPF will be operated to produce a glass product which must meet a number of product property constraints which are dependent upon the final product composition. During actual operations, the DWPF will control the properties of the glass product by the controlled blending of the waste streams with a glass-forming frit to produce the final melter feed slurry. The DWPF will verify control of the glass product through analysis of vitrified samples of slurry material. In order to demonstrate the DWPF process control and product verification strategy, a pilot-scale vitrification research facility was operated in three discrete batches using simulated DWPF waste streams. All of the DWPF process control methodologies were followed and the glass produce from each experiment was leached according to the Product Consistency Test. Results of the campaign are summarized

  10. Signal Processing Implementation and Comparison of Automotive Spatial Sound Rendering Strategies

    Directory of Open Access Journals (Sweden)

    Bai MingsianR

    2009-01-01

    Full Text Available Design and implementation strategies of spatial sound rendering are investigated in this paper for automotive scenarios. Six design methods are implemented for various rendering modes with different number of passengers. Specifically, the downmixing algorithms aimed at balancing the front and back reproductions are developed for the 5.1-channel input. Other five algorithms based on inverse filtering are implemented in two approaches. The first approach utilizes binaural (Head-Related Transfer Functions HRTFs measured in the car interior, whereas the second approach named the point-receiver model targets a point receiver positioned at the center of the passenger's head. The proposed processing algorithms were compared via objective and subjective experiments under various listening conditions. Test data were processed by the multivariate analysis of variance (MANOVA method and the least significant difference (Fisher's LSD method as a post hoc test to justify the statistical significance of the experimental data. The results indicate that inverse filtering algorithms are preferred for the single passenger mode. For the multipassenger mode, however, downmixing algorithms generally outperformed the other processing techniques.

  11. A pilot scale demonstration of the DWPF process control and product verification strategy

    International Nuclear Information System (INIS)

    Hutson, N.D.; Jantzen, C.M.; Beam, D.C.

    1992-01-01

    The Defense Waste Processing Facility (DWPF) has been designed and constructed to immobilize Savannah River Site high level liquid waste within a durable borosilicate glass matrix for permanent storage. The DWPF will be operated to produce a glass product which must meet a number of product property constraints which are dependent upon the final product composition. During actual operations, the DWPF will control the properties of the glass product by the controlled blending of the waste streams with a glass-forming frit to produce the final melter feed slurry. The DWPF will verify control of the glass product through analysis of vitrified samples of slurry material. In order to demonstrate the DWPF process control and product verification strategy, a pilot-scale vitrification research facility was operated in three discrete batches using simulated DWPF waste streams. All of the DWPF process control methodologies were followed and the glass product from each experiment was leached according to the Product Consistency Test. In this paper results of the campaign are summarized

  12. Risk-based Strategy to Determine Testing Requirement for the Removal of Residual Process Reagents as Process-related Impurities in Bioprocesses.

    Science.gov (United States)

    Qiu, Jinshu; Li, Kim; Miller, Karen; Raghani, Anil

    2015-01-01

    The purpose of this article is to recommend a risk-based strategy for determining clearance testing requirements of the process reagents used in manufacturing biopharmaceutical products. The strategy takes account of four risk factors. Firstly, the process reagents are classified into two categories according to their safety profile and history of use: generally recognized as safe (GRAS) and potential safety concern (PSC) reagents. The clearance testing of GRAS reagents can be eliminated because of their safe use historically and process capability to remove these reagents. An estimated safety margin (Se) value, a ratio of the exposure limit to the estimated maximum reagent amount, is then used to evaluate the necessity for testing the PSC reagents at an early development stage. The Se value is calculated from two risk factors, the starting PSC reagent amount per maximum product dose (Me), and the exposure limit (Le). A worst-case scenario is assumed to estimate the Me value, that is common. The PSC reagent of interest is co-purified with the product and no clearance occurs throughout the entire purification process. No clearance testing is required for this PSC reagent if its Se value is ≥1; otherwise clearance testing is needed. Finally, the point of the process reagent introduction to the process is also considered in determining the necessity of the clearance testing for process reagents. How to use the measured safety margin as a criterion for determining PSC reagent testing at process characterization, process validation, and commercial production stages are also described. A large number of process reagents are used in the biopharmaceutical manufacturing to control the process performance. Clearance testing for all of the process reagents will be an enormous analytical task. In this article, a risk-based strategy is described to eliminate unnecessary clearance testing for majority of the process reagents using four risk factors. The risk factors included

  13. Data-processing strategies for nano-tomography with elemental specification

    Science.gov (United States)

    Liu, Yijin; Cats, Korneel H.; Nelson Weker, Johanna; Andrews, Joy C.; Weckhuysen, Bert M.; Pianetta, Piero

    2013-10-01

    Combining the energy tunability provided by synchrotron X-ray sources with transmission X-ray microscopy, the morphology of materials can be resolved in 3D at spatial resolution down to 30 nm with elemental/chemical specification. In order to study the energy dependence of the absorption coefficient over the investigated volume, the tomographic reconstruction and image registration (before and/or after the tomographic reconstruction) are critical. We show in this paper the comparison of two different data processing strategies and conclude that the signal to noise ratio (S/N) in the final result can be improved via performing tomographic reconstruction prior to the evaluation of energy dependence. Our result echoes the dose fractionation theorem, and is particularly helpful when the element of interest has low concentration.

  14. Volatile N-nitrosamines in meat products: Potential precursors, influence of processing, and mitigation strategies.

    Science.gov (United States)

    De Mey, Eveline; De Maere, Hannelore; Paelinck, Hubert; Fraeye, Ilse

    2017-09-02

    Meat products can be contaminated with carcinogenic N-nitrosamines, which is ascribed to the reaction between a nitrosating agent, originating from nitrite or smoke, and a secondary amine, derived from protein and lipid degradation. Although in model systems it is demonstrated that many amine containing compounds can be converted to N-nitrosamines, the yield is dependent of reaction conditions (e.g., low pH and high temperature). In this article, the influence of the composition of the meat products (e.g., pH, a w , spices) and processing (e.g., ageing, ripening, fermentation, smoking, heat treatment and storage) on the presence and availability of the amine precursors and the N-nitrosamine formation mechanism is discussed. In addition, this article explores the current N-nitrosamine mitigation strategies in order to obtain healthier and more natural meat products.

  15. SELECTION OF BUSINESS STRATEGIES FOR QUALITY IMPROVEMENT USING FUZZY ANALYTICAL HIERARCHY PROCESS

    Directory of Open Access Journals (Sweden)

    Prasun Das

    2010-12-01

    Full Text Available Fuzzy linguistic concepts are often used to enhance the traditional analytic hierarchy process (AHP in capturing the fuzziness and subjectiveness of decision makers' judgments. In this paper, fuzzy AHP methodology is adopted for selection of the strategies for business improvement in an Indian industry as a decision making problem. Due to simplicity and effectiveness, triangular fuzzy numbers are adopted as a reference to indicate the influence strength of each element in the hierarchy structure. The confidence level and the optimistic levels of multiple decision makers are captured by using ? -cut based fuzzy number methods. This fuzzy set theory based multi-attribute decision making method is found to be quite useful and effective in industrial environment.

  16. Evaluation of three reagent dosing strategies in a photo-Fenton process for the decolorization of azo dye mixtures

    International Nuclear Information System (INIS)

    Prato-Garcia, D.; Buitrón, Germán

    2012-01-01

    Highlights: ► Dosing strategies for a photo-Fenton process were evaluated. ► The dosing strategy had no effect of on the decolorization. ► The type of strategy influenced SUVA index, toxicity reduction and biodegradability. ► A continuous reagents supply was found to be the most adequate strategy. ► Decolorization as well as a less toxic and biodegradable effluent was produced. - Abstract: Three reagent dosing strategies used in the solar photo-assisted decolorization of a mixture of sulfonated dyes consisting of acid blue 113, acid orange 7 and acid red 151 were evaluated. Results demonstrated that the dosing strategy influenced both reagent consumption and the biodegradability and toxicity of the effluent. In one strategy (E 1 ), the Fenton's reactants were dosed in a punctual mode, while in the other two strategies (E 2 an E 3 ), the reactants were dosed continuously. In the E 2 strategy the reactants were dosed by varying the duration of the injection time. In the E 3 strategy, the reactants were dosed during 60 min at a constant rate, but with different concentrations. All cases showed that feeding the reactor between 40% and 60% of the maximal dose was sufficient to decolorize more than 90% of the mixture of azo dyes. The E 1 strategy was less effective for aromatic content reduction. Conversely, the continuous addition of the reagents (E 2 and E 3 strategies) improved the aromatic content removal. E 3 strategy was substantially more appropriate than E 1 strategy due to improved the effluent quality in two key areas: toxicity and biodegradability.

  17. Multiple aspects of high school students' strategic processing on reading outcomes: The role of quantity, quality, and conjunctive strategy use.

    Science.gov (United States)

    Parkinson, Meghan M; Dinsmore, Daniel L

    2018-03-01

    While the literature on strategy use is relatively mature, measures of strategy use overwhelmingly measure only one aspect of that use, frequency, when relating that strategy use to performance outcomes. While this might be one important attribute of strategy use, there is increasing evidence that quality and conditional use of cognitive and metacognitive strategies may also be important. This study examines how multiple aspects of strategy use, namely frequency, quality, and conjunctive use of strategies, influence task performance on both well- and ill-structured task outcomes in addition to other concomitant variables that may interact with strategic processing during reading. The sample consisted of 21 high school students enrolled in an upper-level biology class in a suburban school in the north-eastern United States. These participants completed measures of prior knowledge and interest, then read either an expository or persuasive text while thinking aloud. They then completed a passage recall and open-ended response following passage completion. In general, quantity was not positively related to the study outcomes and was negatively related to one of them. Quality of strategy use, on the other hand, was consistently related to positive reading outcomes. The influence of knowledge and interest in terms of strategies is also discussed as well as six cases which illustrate the relation of aspects of strategy use and the other concomitant variables. Evaluating strategy use by solely examining the frequency of strategy use did not explain differences in task performance as well as evaluating the quality and conjunctive use of strategies. Further, important relations between prior knowledge, interest, and the task outcomes appeared to be mediated and moderated by the aspects of strategy use investigated. © 2017 The British Psychological Society.

  18. Using Analytic Hierarchy Process for Exploring Prioritization of Functional Strategies in Auto Parts Manufacturing SMEs of Pakistan

    Directory of Open Access Journals (Sweden)

    Yasir Ahmad

    2014-11-01

    Full Text Available This article uses analytical hierarchy process (AHP to find prioritization of functional strategies (manufacturing, marketing, human resource, and financial management by small and medium enterprises (SMEs operating in auto parts manufacturing sector of Pakistan. SMEs are major part of the industrial structure and have significant contribution toward generating jobs in Pakistan. These enterprises are generally family-owned businesses, and this study provides concrete insights into the mind-set of owners toward different functional strategies. The AHP implementation steps are performed using commercially available software “Expert Choice®.” Marketing strategy is considered to be the most important strategy, while manufacturing management strategy is the second most important strategy. There is little emphasis on the financial and human resource management which is a serious cause of concern. The study would help policy makers to understand the business behaviors of this sector and consequently formulate policies to enhance their performance.

  19. Process-oriented guided inquiry learning strategy enhances students' higher level thinking skills in a pharmaceutical sciences course.

    Science.gov (United States)

    Soltis, Robert; Verlinden, Nathan; Kruger, Nicholas; Carroll, Ailey; Trumbo, Tiffany

    2015-02-17

    To determine if the process-oriented guided inquiry learning (POGIL) teaching strategy improves student performance and engages higher-level thinking skills of first-year pharmacy students in an Introduction to Pharmaceutical Sciences course. Overall examination scores and scores on questions categorized as requiring either higher-level or lower-level thinking skills were compared in the same course taught over 3 years using traditional lecture methods vs the POGIL strategy. Student perceptions of the latter teaching strategy were also evaluated. Overall mean examination scores increased significantly when POGIL was implemented. Performance on questions requiring higher-level thinking skills was significantly higher, whereas performance on questions requiring lower-level thinking skills was unchanged when the POGIL strategy was used. Student feedback on use of this teaching strategy was positive. The use of the POGIL strategy increased student overall performance on examinations, improved higher-level thinking skills, and provided an interactive class setting.

  20. Learning processes of students in competence-based pre-vocational secondary education: relations between goal orientations, information processing strategies and development of conceptual knowledge

    NARCIS (Netherlands)

    Dr. M. Koopman; prof dr Douwe Beijaard; Dr P.J. Teune; P. den Brok

    2011-01-01

    The purpose of this study was to investigate relations between goal orientations, information processing strategies and development of conceptual knowledge of pre-vocational secondary education students (n=719; 14 schools). Students' preferences for certain types of goals and information processing

  1. Optimality of the barrier strategy in de Finetti's dividend problem for spectrally negative Lévy processes: An alternative approach

    Science.gov (United States)

    Yin, Chuancun; Wang, Chunwei

    2009-11-01

    The optimal dividend problem proposed in de Finetti [1] is to find the dividend-payment strategy that maximizes the expected discounted value of dividends which are paid to the shareholders until the company is ruined. Avram et al. [9] studied the case when the risk process is modelled by a general spectrally negative Lévy process and Loeffen [10] gave sufficient conditions under which the optimal strategy is of the barrier type. Recently Kyprianou et al. [11] strengthened the result of Loeffen [10] which established a larger class of Lévy processes for which the barrier strategy is optimal among all admissible ones. In this paper we use an analytical argument to re-investigate the optimality of barrier dividend strategies considered in the three recent papers.

  2. A comparison between the first-fit settings of two multichannel digital signal-processing strategies: music quality ratings and speech-in-noise scores.

    Science.gov (United States)

    Higgins, Paul; Searchfield, Grant; Coad, Gavin

    2012-06-01

    The aim of this study was to determine which level-dependent hearing aid digital signal-processing strategy (DSP) participants preferred when listening to music and/or performing a speech-in-noise task. Two receiver-in-the-ear hearing aids were compared: one using 32-channel adaptive dynamic range optimization (ADRO) and the other wide dynamic range compression (WDRC) incorporating dual fast (4 channel) and slow (15 channel) processing. The manufacturers' first-fit settings based on participants' audiograms were used in both cases. Results were obtained from 18 participants on a quick speech-in-noise (QuickSIN; Killion, Niquette, Gudmundsen, Revit, & Banerjee, 2004) task and for 3 music listening conditions (classical, jazz, and rock). Participants preferred the quality of music and performed better at the QuickSIN task using the hearing aids with ADRO processing. A potential reason for the better performance of the ADRO hearing aids was less fluctuation in output with change in sound dynamics. ADRO processing has advantages for both music quality and speech recognition in noise over the multichannel WDRC processing that was used in the study. Further evaluations of which DSP aspects contribute to listener preference are required.

  3. Strategy, Corporate Culture, Structure and Operational Processes as the Context for the Innovativeness of an Organization

    Directory of Open Access Journals (Sweden)

    Szczepańska-Woszczyna Katarzyna

    2018-03-01

    Full Text Available The paper refers to relationships between the innovativeness of an organization and its selected determinants such as strategy, corporate culture, structure and operational processes. Research was conducted among 200 managers at the top, middle and operational levels of management (200 companies operating in Poland implementing innovations - innovative companies. Conditions leading to innovations are described as the combination of processes, which result from the internal and external dynamics of a given entity. The analysis assumed that the assessment of company innovativeness would be based on an assessment of whether the company is a leader in the industry in terms of new products (the higher the rating, the more innovative the company is considered to be. The relationship between the dimensions of the company's functioning and the degree of its innovativeness was rated on the basis of two measures: the Spearman's rank correlation coefficient and the chi-square coefficient. It was assumed that the most innovative companies have structures similar to organic ones, with a weak influence of the elements of mechanistic structures. This assumption was proven in relation to features of organizations considered important for innovativeness.

  4. Production of ethanol 3G from Kappaphycus alvarezii: evaluation of different process strategies.

    Science.gov (United States)

    Hargreaves, Paulo Iiboshi; Barcelos, Carolina Araújo; da Costa, Antonio Carlos Augusto; Pereira, Nei

    2013-04-01

    This study evaluated the potential of Kappaphycus alvarezii as feedstock for ethanol production, i.e. ethanol 3G. First, aquatic biomass was subjected to a diluted acid pretreatment. This acid pretreatment generated two streams--a galactose-containing liquid fraction and a cellulose-containing solid fraction, which were investigated to determine their fermentability with the following strategies: a single-stream process (simultaneous saccharification and co-fermentation (SSCF) of both fractions altogether), which achieved 64.3 g L(-1) of ethanol, and a two-stream process (fractions were fermented separately), which resulted in 38 g L(-1) of ethanol from the liquid fraction and 53.0 g L(-1) from the simultaneous saccharification and fermentation (SSF) of the solid fraction. Based on the average fermentable carbohydrate concentration, it was possible to obtain 105 L of ethanol per ton of dry seaweed. These preliminaries results indicate that the use of the macro-algae K. alvarezii has a good potential feedstock for bioethanol production. Copyright © 2013. Published by Elsevier Ltd.

  5. Inverse Source Data-Processing Strategies for Radio-Frequency Localization in Indoor Environments

    Directory of Open Access Journals (Sweden)

    Gianluca Gennarelli

    2017-10-01

    Full Text Available Indoor positioning of mobile devices plays a key role in many aspects of our daily life. These include real-time people tracking and monitoring, activity recognition, emergency detection, navigation, and numerous location based services. Despite many wireless technologies and data-processing algorithms have been developed in recent years, indoor positioning is still a problem subject of intensive research. This paper deals with the active radio-frequency (RF source localization in indoor scenarios. The localization task is carried out at the physical layer thanks to receiving sensor arrays which are deployed on the border of the surveillance region to record the signal emitted by the source. The localization problem is formulated as an imaging one by taking advantage of the inverse source approach. Different measurement configurations and data-processing/fusion strategies are examined to investigate their effectiveness in terms of localization accuracy under both line-of-sight (LOS and non-line of sight (NLOS conditions. Numerical results based on full-wave synthetic data are reported to support the analysis.

  6. Logical Reasoning versus Information Processing in the Dual-Strategy Model of Reasoning

    Science.gov (United States)

    Markovits, Henry; Brisson, Janie; de Chantal, Pier-Luc

    2017-01-01

    One of the major debates concerning the nature of inferential reasoning is between counterexample-based strategies such as mental model theory and statistical strategies underlying probabilistic models. The dual-strategy model, proposed by Verschueren, Schaeken, & d'Ydewalle (2005a, 2005b), which suggests that people might have access to both…

  7. Identity processes and coping strategies in college students : Short-term longitudinal dynamics and the role of personality

    NARCIS (Netherlands)

    Luyckx, K.; Klimstra, T.A.; Duriez, B.; Schwartz, S.J.; Vanhalst, J.

    2012-01-01

    Coping strategies and identity processes are hypothesized to influence one another over time. This three-wave longitudinal study (N = 458; 84.9% women) examined, for the first time, how and to what extent identity processes (i.e., commitment making, identification with commitment, exploration in

  8. Students' goal orientations, information processing strategies and knowledge development in competence-based pre-vocational secondary education

    NARCIS (Netherlands)

    Koopman, M.

    2010-01-01

    In this study, learning processes of students in competence-based Pre-Vocational Secondary Education (PVSE; in Dutch vmbo) were investigated. The study aimed at describing the relation between goal orientations, information processing strategies and the development of knowledge of these students.

  9. Combining metabolic and process engineering strategies to improve recombinant glycoprotein production and quality.

    Science.gov (United States)

    Karengera, Eric; Durocher, Yves; De Crescenzo, Gregory; Henry, Olivier

    2017-11-01

    Increasing recombinant protein production while ensuring a high and consistent protein quality remains a challenge in mammalian cell culture process development. In this work, we combined a nutrient substitution approach with a metabolic engineering strategy that improves glucose utilization efficiency. This combination allowed us to tackle both lactate and ammonia accumulation and investigate on potential synergistic effects on protein production and quality. To this end, HEK293 cells overexpressing the pyruvate yeast carboxylase (PYC2) and their parental cells, both stably producing the therapeutic glycoprotein interferon α2b (IFNα2b), were cultured in media deprived of glutamine but containing chosen substitutes. Among the tested substitutes, pyruvate led to the best improvement in growth (integral of viable cell density) for both cell lines in batch cultures, whereas the culture of PYC2 cells without neither glutamine nor any substitute displayed surprisingly enhanced IFNα2b production. The drastic reduction in both lactate and ammonia in the cultures translated into extended high viability conditions and an increase in recombinant protein titer by up to 47% for the parental cells and the PYC2 cells. Product characterization performed by surface plasmon resonance biosensing using Sambucus nigra (SNA) lectin revealed that the increase in yield was however accompanied by a reduction in the degree of sialylation of the product. Supplementing cultures with glycosylation precursors and a cofactor were effective at counterbalancing the lack of glutamine and allowed improvement in IFNα2b quality as evaluated by lectin affinity. Our study provides a strategy to reconcile protein productivity and quality and highlights the advantages of PYC2-overexpressing cells in glutamine-free conditions.

  10. An Integrated Processing Strategy for Mountain Glacier Motion Monitoring Based on SAR Images

    Science.gov (United States)

    Ruan, Z.; Yan, S.; Liu, G.; LV, M.

    2017-12-01

    Mountain glacier dynamic variables are important parameters in studies of environment and climate change in High Mountain Asia. Due to the increasing events of abnormal glacier-related hazards, research of monitoring glacier movements has attracted more interest during these years. Glacier velocities are sensitive and changing fast under complex conditions of high mountain regions, which implies that analysis of glacier dynamic changes requires comprehensive and frequent observations with relatively high accuracy. Synthetic aperture radar (SAR) has been successfully exploited to detect glacier motion in a number of previous studies, usually with pixel-tracking and interferometry methods. However, the traditional algorithms applied to mountain glacier regions are constrained by the complex terrain and diverse glacial motion types. Interferometry techniques are prone to fail in mountain glaciers because of their narrow size and the steep terrain, while pixel-tracking algorithm, which is more robust in high mountain areas, is subject to accuracy loss. In order to derive glacier velocities continually and efficiently, we propose a modified strategy to exploit SAR data information for mountain glaciers. In our approach, we integrate a set of algorithms for compensating non-glacial-motion-related signals which exist in the offset values retrieved by sub-pixel cross-correlation of SAR image pairs. We exploit modified elastic deformation model to remove the offsets associated with orbit and sensor attitude, and for the topographic residual offset we utilize a set of operations including DEM-assisted compensation algorithm and wavelet-based algorithm. At the last step of the flow, an integrated algorithm combining phase and intensity information of SAR images will be used to improve regional motion results failed in cross-correlation related processing. The proposed strategy is applied to the West Kunlun Mountain and Muztagh Ata region in western China using ALOS

  11. Decision Making Strategy and the Simultaneous Processing of Syntactic Dependencies in Language and Music.

    Science.gov (United States)

    Roncaglia-Denissen, M P; Bouwer, Fleur L; Honing, Henkjan

    2018-01-01

    Despite differences in their function and domain-specific elements, syntactic processing in music and language is believed to share cognitive resources. This study aims to investigate whether the simultaneous processing of language and music share the use of a common syntactic processor or more general attentional resources. To investigate this matter we tested musicians and non-musicians using visually presented sentences and aurally presented melodies containing syntactic local and long-distance dependencies. Accuracy rates and reaction times of participants' responses were collected. In both sentences and melodies, unexpected syntactic anomalies were introduced. This is the first study to address the processing of local and long-distance dependencies in language and music combined while reducing the effect of sensory memory. Participants were instructed to focus on language (language session), music (music session), or both (dual session). In the language session, musicians and non-musicians performed comparably in terms of accuracy rates and reaction times. As expected, groups' differences appeared in the music session, with musicians being more accurate in their responses than non-musicians and only the latter showing an interaction between the accuracy rates for music and language syntax. In the dual session musicians were overall more accurate than non-musicians. However, both groups showed comparable behavior, by displaying an interaction between the accuracy rates for language and music syntax responses. In our study, accuracy rates seem to better capture the interaction between language and music syntax; and this interaction seems to indicate the use of distinct, however, interacting mechanisms as part of decision making strategy. This interaction seems to be subject of an increase of attentional load and domain proficiency. Our study contributes to the long-lasting debate about the commonalities between language and music by providing evidence for their

  12. Effects of injection angles on combustion processes using multiple injection strategies in an HSDI diesel engine

    Energy Technology Data Exchange (ETDEWEB)

    Tiegang Fang; Robert E. Coverdill; Chia-fon F. Lee; Robert A. White [North Carolina State University, Raleigh, NC (United States). Department of Mechanical and Aerospace Engineering

    2008-11-15

    Effects of injection angles and injection pressure on the combustion processes employing multiple injection strategies in a high-speed direct-injection (HSDI) diesel engine are presented in this work. Whole-cycle combustion and liquid spray evolution processes were visualized using a high-speed video camera. NOx emissions were measured in the exhaust pipe. Different heat release patterns are seen for two different injectors with a 70-degree tip and a 150-degree tip. No evidence of fuel-wall impingement is found for the first injection of the 150-degree tip, but for the 70-degree tip, some fuel impinges on the bowl wall and a fuel film is formed. For the second injection, a large amount of fuel deposition is observed for the 70-degree tip. Weak flame is seen for the first injection of the 150-degree tip while two sorts of flames are seen for the first injection of the 70-degree tip including an early weak flame and a late luminous film combustion flame. Ignition occurs near the spray tip in the vicinity of the bowl wall for the second injection events of the 150-degree tip, however, it is near the injector tip in the central region of the bowl for the 70-degree tip. The flame is more homogeneous for the 150-degree tip with higher injection pressure with little soot formation similar to a premixed-charge-compression-ignition (PCCI) combustion. For other cases, liquid fuel is injected into flames showing diffusion flame combustion. More soot luminosity is seen for the 70-degree tip due to significant fuel film deposition on the piston wall with fuel film combustion for both injection events. Lower NOx emissions were obtained for the narrow-angle injector due to the rich air-fuel mixture near the bowl wall during the combustion process. 30 refs., 11 figs., 3 tabs.

  13. Decision Making Strategy and the Simultaneous Processing of Syntactic Dependencies in Language and Music

    Directory of Open Access Journals (Sweden)

    M. P. Roncaglia-Denissen

    2018-01-01

    Full Text Available Despite differences in their function and domain-specific elements, syntactic processing in music and language is believed to share cognitive resources. This study aims to investigate whether the simultaneous processing of language and music share the use of a common syntactic processor or more general attentional resources. To investigate this matter we tested musicians and non-musicians using visually presented sentences and aurally presented melodies containing syntactic local and long-distance dependencies. Accuracy rates and reaction times of participants’ responses were collected. In both sentences and melodies, unexpected syntactic anomalies were introduced. This is the first study to address the processing of local and long-distance dependencies in language and music combined while reducing the effect of sensory memory. Participants were instructed to focus on language (language session, music (music session, or both (dual session. In the language session, musicians and non-musicians performed comparably in terms of accuracy rates and reaction times. As expected, groups’ differences appeared in the music session, with musicians being more accurate in their responses than non-musicians and only the latter showing an interaction between the accuracy rates for music and language syntax. In the dual session musicians were overall more accurate than non-musicians. However, both groups showed comparable behavior, by displaying an interaction between the accuracy rates for language and music syntax responses. In our study, accuracy rates seem to better capture the interaction between language and music syntax; and this interaction seems to indicate the use of distinct, however, interacting mechanisms as part of decision making strategy. This interaction seems to be subject of an increase of attentional load and domain proficiency. Our study contributes to the long-lasting debate about the commonalities between language and music by

  14. Application of poultry processing industry waste: a strategy for vegetation growth in degraded soil.

    Science.gov (United States)

    do Nascimento, Carla Danielle Vasconcelos; Pontes Filho, Roberto Albuquerque; Artur, Adriana Guirado; Costa, Mirian Cristina Gomes

    2015-02-01

    The disposal of poultry processing industry waste into the environment without proper care, can cause contamination. Agricultural monitored application is an alternative for disposal, considering its high amount of organic matter and its potential as a soil fertilizer. This study aimed to evaluate the potential of poultry processing industry waste to improve the conditions of a degraded soil from a desertification hotspot, contributing to leguminous tree seedlings growth. The study was carried out under greenhouse conditions in a randomized blocks design and a 4 × 2 factorial scheme with five replicates. The treatments featured four amounts of poultry processing industry waste (D1 = control 0 kg ha(-1); D2 = 1020.41 kg ha(-1); D3 = 2040.82 kg ha(-1); D4 = 4081.63 kg ha(-1)) and two leguminous tree species (Mimosa caesalpiniaefolia Benth and Leucaena leucocephala (Lam.) de Wit). The poultry processing industry waste was composed of poultry blood, grease, excrements and substances from the digestive system. Plant height, biomass production, plant nutrient accumulation and soil organic carbon were measured forty days after waste application. Leguminous tree seedlings growth was increased by waste amounts, especially M. caesalpiniaefolia Benth, with height increment of 29.5 cm for the waste amount of 1625 kg ha(-1), and L. leucocephala (Lam.) de Wit, with maximum height increment of 20 cm for the waste amount of 3814.3 kg ha(-1). M. caesalpiniaefolia Benth had greater initial growth, as well as greater biomass and nutrient accumulation compared with L. leucocephala (Lam.) de Wit. However, belowground biomass was similar between the evaluated species, resulting in higher root/shoot ratio for L. leucocephala (Lam.) de Wit. Soil organic carbon did not show significant response to waste amounts, but it did to leguminous tree seedlings growth, especially L. leucocephala (Lam.) de Wit. Poultry processing industry waste contributes to leguminous tree seedlings growth

  15. Strategy for verification and demonstration of the sealing process for canisters for spent fuel

    International Nuclear Information System (INIS)

    Mueller, Christina; Oeberg, Tomas

    2004-08-01

    Electron beam welding and friction stir welding are the two processes now being considered for sealing copper canisters with Sweden's radioactive waste. This report outlines a strategy for verification and demonstration of the encapsulation process which here is considered to consist of the sealing of the canister by welding followed by quality control of the weld by non-destructive testing. Statistical methodology provides a firm basis for modern quality technology and design of experiments has been successful part of it. Factorial and fractional factorial designs can be used to evaluate main process factors and their interactions. Response surface methodology with multilevel designs enables further optimisation. Empirical polynomial models can through Taylor series expansions approximate the true underlying relationships sufficiently well. The fitting of response measurements is based on ordinary least squares regression or generalised linear methods. Unusual events, like failures in the lid welds, are best described with extreme value statistics and the extreme value paradigm give a rationale for extrapolation. Models based on block maxima (the generalised extreme value distribution) and peaks over threshold (the generalised Pareto distribution) are considered. Experiences from other fields of the materials sciences suggest that both of these approaches are useful. The initial verification experiments of the two welding technologies considered are suggested to proceed by experimental plans that can be accomplished with only four complete lid welds each. Similar experimental arrangements can be used to evaluate process 'robustness' and optimisation of the process window. Two series of twenty demonstration trials each, mimicking assembly-line production, are suggested as a final evaluation before the selection of welding technology. This demonstration is also expected to provide a data base suitable for a baseline estimate of future performance. This estimate can

  16. Strategy for verification and demonstration of the sealing process for canisters for spent fuel

    Energy Technology Data Exchange (ETDEWEB)

    Mueller, Christina [Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin (Germany); Oeberg, Tomas [Tomas Oeberg Konsult AB, Lyckeby (Sweden)

    2004-08-01

    Electron beam welding and friction stir welding are the two processes now being considered for sealing copper canisters with Sweden's radioactive waste. This report outlines a strategy for verification and demonstration of the encapsulation process which here is considered to consist of the sealing of the canister by welding followed by quality control of the weld by non-destructive testing. Statistical methodology provides a firm basis for modern quality technology and design of experiments has been successful part of it. Factorial and fractional factorial designs can be used to evaluate main process factors and their interactions. Response surface methodology with multilevel designs enables further optimisation. Empirical polynomial models can through Taylor series expansions approximate the true underlying relationships sufficiently well. The fitting of response measurements is based on ordinary least squares regression or generalised linear methods. Unusual events, like failures in the lid welds, are best described with extreme value statistics and the extreme value paradigm give a rationale for extrapolation. Models based on block maxima (the generalised extreme value distribution) and peaks over threshold (the generalised Pareto distribution) are considered. Experiences from other fields of the materials sciences suggest that both of these approaches are useful. The initial verification experiments of the two welding technologies considered are suggested to proceed by experimental plans that can be accomplished with only four complete lid welds each. Similar experimental arrangements can be used to evaluate process 'robustness' and optimisation of the process window. Two series of twenty demonstration trials each, mimicking assembly-line production, are suggested as a final evaluation before the selection of welding technology. This demonstration is also expected to provide a data base suitable for a baseline estimate of future performance

  17. Strategy for verification and demonstration of the sealing process for canisters for spent fuel

    Energy Technology Data Exchange (ETDEWEB)

    Mueller, Christina [Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin (Germany); Oeberg, Tomas [Tomas Oeberg Konsult AB, Lyckeby (Sweden)

    2004-08-01

    Electron beam welding and friction stir welding are the two processes now being considered for sealing copper canisters with Sweden's radioactive waste. This report outlines a strategy for verification and demonstration of the encapsulation process which here is considered to consist of the sealing of the canister by welding followed by quality control of the weld by non-destructive testing. Statistical methodology provides a firm basis for modern quality technology and design of experiments has been successful part of it. Factorial and fractional factorial designs can be used to evaluate main process factors and their interactions. Response surface methodology with multilevel designs enables further optimisation. Empirical polynomial models can through Taylor series expansions approximate the true underlying relationships sufficiently well. The fitting of response measurements is based on ordinary least squares regression or generalised linear methods. Unusual events, like failures in the lid welds, are best described with extreme value statistics and the extreme value paradigm give a rationale for extrapolation. Models based on block maxima (the generalised extreme value distribution) and peaks over threshold (the generalised Pareto distribution) are considered. Experiences from other fields of the materials sciences suggest that both of these approaches are useful. The initial verification experiments of the two welding technologies considered are suggested to proceed by experimental plans that can be accomplished with only four complete lid welds each. Similar experimental arrangements can be used to evaluate process 'robustness' and optimisation of the process window. Two series of twenty demonstration trials each, mimicking assembly-line production, are suggested as a final evaluation before the selection of welding technology. This demonstration is also expected to provide a data base suitable for a baseline estimate of future performance. This estimate can

  18. Structural and process factors affecting the implementation of antimicrobial resistance prevention and control strategies in U.S. hospitals.

    Science.gov (United States)

    Chou, Ann F; Yano, Elizabeth M; McCoy, Kimberly D; Willis, Deanna R; Doebbeling, Bradley N

    2008-01-01

    To address increases in the incidence of infection with antimicrobial-resistant pathogens, the National Foundation for Infectious Diseases and Centers for Disease Control and Prevention proposed two sets of strategies to (a) optimize antibiotic use and (b) prevent the spread of antimicrobial resistance and control transmission. However, little is known about the implementation of these strategies. Our objective is to explore organizational structural and process factors that facilitate the implementation of National Foundation for Infectious Diseases/Centers for Disease Control and Prevention strategies in U.S. hospitals. We surveyed 448 infection control professionals from a national sample of hospitals. Clinically anchored in the Donabedian model that defines quality in terms of structural and process factors, with the structural domain further informed by a contingency approach, we modeled the degree to which National Foundation for Infectious Diseases and Centers for Disease Control and Prevention strategies were implemented as a function of formalization and standardization of protocols, centralization of decision-making hierarchy, information technology capabilities, culture, communication mechanisms, and interdepartmental coordination, controlling for hospital characteristics. Formalization, standardization, centralization, institutional culture, provider-management communication, and information technology use were associated with optimal antibiotic use and enhanced implementation of strategies that prevent and control antimicrobial resistance spread (all p prevention and control (p support these organizational processes. These findings suggest concrete strategies for evaluating current capabilities to implement effective practices and foster and sustain a culture of patient safety.

  19. Numeral Incorporation in Japanese Sign Language

    Science.gov (United States)

    Ktejik, Mish

    2013-01-01

    This article explores the morphological process of numeral incorporation in Japanese Sign Language. Numeral incorporation is defined and the available research on numeral incorporation in signed language is discussed. The numeral signs in Japanese Sign Language are then introduced and followed by an explanation of the numeral morphemes which are…

  20. Carbon incorporation process in GaAsN films grown by chemical beam epitaxy using MMHy or DMHy as the N source

    International Nuclear Information System (INIS)

    Suzuki, H.; Nishimura, K.; Lee, H.S.; Ohshita, Y.; Kojima, N.; Yamaguchi, M.

    2007-01-01

    Crystal quality of GaAsN films can be improved by using CBE for low-temperature growth. However, low-temperature growth increases C incorporation in the films, which degrades their electrical properties. Consequently, C incorporation was investigated in view of the surface reaction of N sources on a substrate surface, and MMHy and DMHy were compared. When MMHy was used as an N source, C concentration in GaAsN drastically increases below 380 deg. C than that in GaAs due to insufficient CH x desorption. In the case of DMHy, N(CH 3 ) 2 is desorbed more readily than CH x , therefore, the C concentration can then be reduced using DMHy

  1. Differential modulation of apoptotic processes by proanthocyanidins as a dietary strategy for delaying chronic pathologies.

    Science.gov (United States)

    Puiggròs, Francesc; Salvadó, Maria-Josepa; Bladé, Cinta; Arola, Lluís

    2014-01-01

    Apoptosis is a biological process necessary for maintaining cellular homeostasis. Several diseases can result if it is deregulated. For example, inhibition of apoptotic signaling pathways is linked to the survival of pathological cells, which contributes to cancer, whereas excessive apoptosis is linked to neurodegenerative diseases, partially via oxidative stress. The activation or restoration of apoptosis via extrinsic or intrinsic pathways combined with cell signaling pathways triggered by reactive oxygen specises (ROS) formation is considered a key strategy by which bioactive foods can exert their health effects. Proanthocyanidins, a class of flavonoids naturally found in fruits, vegetables, and beverages, have attracted a great deal of attention not only because they are strong antioxidants but also because they appear to exert a different modulation of apoptosis, stimulating apoptosis in damaged cells, thus preventing cancer or reducing apoptosis in healthy cells, and as a result, preserving the integrity of normal cells and protecting against neurodegenerative diseases. Therefore, proanthocyanidins could provide a defense against apoptosis induced by oxidative stress or directly inhibit apoptosis, and they could also provide a promising treatment for a variety of diseases. Emerging data suggest that proanthocyanidins, especially those that humans can be persuaded to consume, may be used to prevent and manage cancer and mental disorders.

  2. Selection of optimum maintenance strategies based on a fuzzy analytic hierarchy process

    Directory of Open Access Journals (Sweden)

    Aida Azizi

    2014-05-01

    Full Text Available This paper presents an empirical investigation to rank different factors influencing on maintenance strategies on Iranian oil terminals’ company. The study determines four main factors, production quality, reliability, cost and safety. Using fuzzy analytical process, the study determines various factors associated with each main factor and ranks them by performing pair-wise comparisons. The results indicate that reliability ranks first (0.255, followed by production quality (0.252, cost (0.25 and safety (0.244. In terms of reliability, the best utilization of resources is number one priority followed by increase access to maintenance tools, reduction in production interruption are among the most important issues. In terms of production quality, reduction in system failure as well as reworks is the most important factors followed by customer satisfaction and defects. In terms of cost items, ease of access to accessories and consulting are important factors followed by necessary software, hardware and training programs. Finally, in terms of safety factors, external, internal and employee services are the most important issues, which are needed to be considered.

  3. Analytic hierarchy process analysis for choosing a corporate social entrepreneurship strategy

    Directory of Open Access Journals (Sweden)

    Hadad Shahrazad

    2015-10-01

    Full Text Available After conducting an extensive analysis of both the specialised literature and practice and identifying three types of corporate social entrepreneurship in my PhD thesis titled “Corporate social entrepreneurship - the new paradigm of reshaping and rethinking business”, I decided to determine which of the three approaches is mostly suited for the Romanian market. The three types of corporate social entrepreneurship: corporate social entrepreneurship as local development tool, corporate social entrepreneurship as market development tool, and corporate social entrepreneurship as transformational innovation tool were organised as the alternatives of a carefully constructed hierarchy having as criteria: return on investment (which does not necessarily refer to the money that the company invests in the strategy; the term is derived from sustainability and scalability, degree of novelty, pre-entry knowledge and interest in solving the communities’ social problems. The questionnaire constructed based on the hierarchy using analytic hierarchy processes was distributed to experts (business developers coming from the following industries or sectors: beverages, IT, banking, furniture, and automotive. The research reveals which is the approach most likely to be employed by Romanian business developers. The results may be inferred to the sum of businesses represented by the expert business developers who were part of the research.

  4. Strateji Belirleme Sürecinin Kapsamlılığı = Comprehensiveness of the Process of Developing Strategy

    Directory of Open Access Journals (Sweden)

    Lütfihak ALPKAN

    2000-06-01

    Full Text Available According to the integrated planning approach, strategic management comprehending a proactive, rational, normative and comprehensive sequence, is composed of the following main steps, namely, determination of the mission and goals, determination of the corporate strategies after an environmental analysis, and implementation and control of these strategies. One of the significant characteristics of the strategy determination process is the notion of comprehensiveness that is a detailed study of strengths and weaknesses of the firm and the opportunities and threats within the environment and a deeper evaluation of the collected data. Allocating more time and resources for this process, collecting more information and making more debates over conflicting opinions among strategists before the final decision are the important properties of this process.

  5. The physicochemical process of bacterial attachment to abiotic surfaces: Challenges for mechanistic studies, predictability and the development of control strategies.

    Science.gov (United States)

    Wang, Yi; Lee, Sui Mae; Dykes, Gary

    2015-01-01

    Bacterial attachment to abiotic surfaces can be explained as a physicochemical process. Mechanisms of the process have been widely studied but are not yet well understood due to their complexity. Physicochemical processes can be influenced by various interactions and factors in attachment systems, including, but not limited to, hydrophobic interactions, electrostatic interactions and substratum surface roughness. Mechanistic models and control strategies for bacterial attachment to abiotic surfaces have been established based on the current understanding of the attachment process and the interactions involved. Due to a lack of process control and standardization in the methodologies used to study the mechanisms of bacterial attachment, however, various challenges are apparent in the development of models and control strategies. In this review, the physicochemical mechanisms, interactions and factors affecting the process of bacterial attachment to abiotic surfaces are described. Mechanistic models established based on these parameters are discussed in terms of their limitations. Currently employed methods to study these parameters and bacterial attachment are critically compared. The roles of these parameters in the development of control strategies for bacterial attachment are reviewed, and the challenges that arise in developing mechanistic models and control strategies are assessed.

  6. The Assessment of Cognitive Emotion Regulation Strategies, Sensory Processing Sensitivity and Anxiety Sensitivity in Patients with Multiple Sclerosis

    Directory of Open Access Journals (Sweden)

    Esmeil Soleymani

    2016-11-01

    Full Text Available Abstract Background: The purpose of this study was to compare the cognitive emotional regulation strategies, sensory processing sensitivity and anxiety sensitivity in patients with multiple sclerosis and normal people. Materials and Methods: Statistical population of this study was all of patients with multiple sclerosis that referred to M.S association of Iran in the tehran. Sample of this study was 30 individuals of patients with multiple sclerosis selected by available sampling method and were matched with 30 individuals of normal people. Two groups completed cognitive emotion regulation, high sensory processing sensitivity and anxiety sensitivity questionnaires. Data were analyzed by one-way analysis of variance and Multivariate Analysis of Variance. Results: The results indicated that there is significant difference between two groups in view of cognitive emotion regulation strategies in which the mean of scores of patients with multiple sclerosis in maladaptive strategies of self- blame, catastrophizing and other blame were more than normal people and mean of scores of them in adaptive strategies of positive refocusing, positive reappraisal and putting into perspective were less than normal people. The results also indicated that there is a significant difference between two groups in anxiety sensitivity and sensory processing sensitivity. Conclusion: The most of emotional problems in patients with multiple sclerosis can be the result of more application of maladaptive strategies of cognitive emotion regulation, high sensory processing sensitivity and high anxiety sensitivity.

  7. Instructional Strategies Used to Improve Students' Comfort and Skill in Addressing the Occupational Therapy Process

    Science.gov (United States)

    Knecht-Sabres, Lisa Jean; Egan, Brad E.; Wallingford, Minetta S.; Kovic, Mark

    2015-01-01

    The purpose of this study was to investigate the effectiveness of an intentional blending of instructional strategies in an occupational therapy (OT) entry-level master's course. The OT Adult Practice course uses case-based instructional strategies, clinical skills labs, and standardized patient experiences in a dovetailed approach across three…

  8. Making Twenty-First-Century Strategy. An Introduction to Modern National Security Processes and Problems

    Science.gov (United States)

    2006-11-01

    of the same Greek root word connotes “great importance” or the “highest level.” In the resulting confusion, which continues to this day even among...battlefield strategy may puzzle some readers. We chose to use battlefield strategy to emphasize the connection between decisions made in the marble -lined

  9. Governance processes and change within organizational participants of multi-sectoral community health care alliances: the mediating role of vision, mission, strategy agreement and perceived alliance value.

    Science.gov (United States)

    Hearld, Larry R; Alexander, Jeffrey A

    2014-03-01

    Multi-sectoral community health care alliances are organizations that bring together individuals and organizations from different industry sectors to work collaboratively on improving the health and health care in local communities. Long-term success and sustainability of alliances are dependent on their ability to galvanize participants to take action within their 'home' organizations and institutionalize the vision, goals, and programs within participating organizations and the broader community. The purpose of this study was to investigate two mechanisms by which alliance leadership and management processes may promote such changes within organizations participating in alliances. The findings of the study suggest that, despite modest levels of change undertaken by participating organizations, more positive perceptions of alliance leadership, decision making, and conflict management were associated with a greater likelihood of participating organizations making changes as a result of their participation in the alliance, in part by promoting greater vision, mission, and strategy agreement and higher levels of perceived value. Leadership processes had a stronger relationship with change within participating organizations than decision-making style and conflict management processes. Open-ended responses by participants indicated that participating organizations most often incorporated new measures or goals into their existing portfolio of strategic plans and activities in response to alliance participation.

  10. Neo Strategy to Use Fixed-Whiteboard Based on Student’s Thinking Process and Cultural Ethicaly in Learning Physics

    Directory of Open Access Journals (Sweden)

    Wahyu Hari Kristiyanto

    2017-08-01

    Full Text Available Old guidelines to use the whiteboard stated that teachers were not allowed to write on the whiteboard while talking, because unethical if speak while back facing students. Findings about thinking process profile in information processing were presented with a whiteboard showed that the assimilation process is going to be supported, and audio-visual stimulants. This paper aims to describe the implementation of the latest strategies to use fixed-whiteboard based on student’s thinking process in learning physics with maximum the optimal thought processes and also maintain cultural ethics. This research was conducted through the use of guideline development assessment implementation fixed-slates based on the findings of the process of thinking and ethical culture in physics learning. The results showed that the latest strategy the use of fixed-whiteboard based on the thought process students and ethical culture in learning physics are (1 the assimilation process so that the display contents whiteboard is a material that is correct and does not cause cognitive conflict, (2 they are mutually reinforcing a combination of visual and audio so that the need to write while spelling, and (3 the thinking process to the stage of internalization that stage of the emergence of good information text / image / formula can be seen intact by all students by writing not cover impressions. The implementation results show the subject has been able to implement the latest strategies use fixed-whiteboard with both categories. The conclusions of this study that the use of the latest strategies fixed-whiteboard can be used for the presentation of information which is more than usual for students according to their thinking process and also maintain cultural ethics. The implication of this research is for Workforce Education Institutions need to equip student teachers with the skills to use the whiteboard based on the latest strategy. How to CiteKristiyanto, W. H

  11. The Role of mPOS System in Process Change and Strategy Change: A Situated Change Perspective

    Directory of Open Access Journals (Sweden)

    Yao Chin Lin

    2015-10-01

    Full Text Available The purpose of this study is to revisit the relationship among information technology (IT, Process, and Strategy. We focus on the impact of mobile Point of Sales (mPOS on changing of operational processes in the restaurant industry. This study investigates the changing of IT strategy and service strategy. The research model was developed based on the literature (strategic alignment model and situated change perspective and inputs from the restaurant industry and IT experts. The data of this study are collected from observation and face-to-face interviews with both business and IT personnel from 10 restaurants in Taiwan. The findings of this study provide a comprehensive view about the ways processes change once restaurants implements mPOS. We also figure out the impact of this change on IT strategy and service strategy. This study’s results shed new light on IT implementation. Researchers need to look at IT in different ways and suggest suitable solutions for practitioners.

  12. New evidence for hominin carcass processing strategies at 1.5 Ma, Koobi Fora, Kenya.

    Science.gov (United States)

    Pobiner, Briana L; Rogers, Michael J; Monahan, Christopher M; Harris, John W K

    2008-07-01

    Reconstruction of early Pleistocene hominin carcass acquisition and processing behaviors are necessarily based at least in part on butchered fossil bones. This paper provides zooarchaeological and taphonomic analyses and behavioral interpretations of three approximately 1.5 million-year-old archaeofaunas from areas 1A and 103 in the Okote Member of the Koobi Fora Formation, northern Kenya: FwJj14A, FwJj14B, and GaJi14. These sites are all located in similar paleoenvironmental contexts, near shallow water with swampy, seasonally flooded areas, and some evidence for more wooded or gallery forest settings. Both individual specimen--and assemblage-level analyses of butchery-marked bones indicate that the hominins appear to have practiced similar butchery strategies at all of these sites, with butchery (defleshing, disarticulation, and marrow extraction) of both high- and low-ranked skeletal elements with no apparent preference for prey size, skeletal region, limb class, or limb portion. Only four tooth-marked specimens, including one likely crocodile-tooth-marked bone, are preserved in all three archaeofaunas. A paucity of limb epiphyses suggests that bone-crunching hyenids may have deleted these portions subsequent to hominin butchery. Strangely, there are no stone tools preserved with the 292 cut-marked and 27 percussion-marked faunal specimens (out of a total of 6,039 specimens), suggesting that raw material availability may have conditioned hominin lithic discard patterns at these locales. These assemblages increase our knowledge of the dietary behavior and ecology of Homo erectus, and provide support for variability in early Pleistocene hominin carcass foraging patterns.

  13. [The strategy and process of out-hospital emergency care of acute cardiovascular events].

    Science.gov (United States)

    Sun, Gang; Wu, Li-e; Li, Qian-ying; Yang, Ye; Wang, Zi-chao; Zhang, Jing-yin; Li, Shu-jun; Yan, Xu-long; Wang, Ming; Zhang, Wen-xiang; Huang, Guan-hua

    2009-06-01

    To study the strategy and process of out-hospital emergency care of acute cardiovascular events. One hundred and eighty-three patients in the Second Affiliated Hospital of Baotou Medical College were prospectively studied. The patients were divided into two groups according to the different ways of out-hospital care, one group consisted of patients who received first-aid care after calling "120" (94 cases), another was self-aid group consisting of patients sent to hospital by relatives (89 cases). The proportion of persons with higher than high school education and better knowledge for emergency care of patients with heart disease in first-aid group was higher than self-aid group (50.0% vs. 29.2%, 83.0% vs. 60.7%, both Pemergency room, they were all treated according to our standard procedure and then registered. All patients were followed up at the end of first and third month after illness. Cardiovascular events were mainly myocardial infarction (61.7%) among 183 patients. There were statistically significant differences between two groups in self-aid response time, first disposal time and out-hospital rescuing time [(32.3+/-5.6) minutes vs. (89.6+/- 8.4) minutes, (47.3+/-7.3) minutes vs. (149.8+/-13.5) minutes, (61.7+/-8.3) minutes vs. [(149.8+/- 13.5) minutes, all P0.05]. Morbidity rate was lower in first-aid group than self-aid group in 1st and 3rd month, respectively (2.1% vs. 9.0%, 4.2% vs. 12.4%, both Pemergency system and procedure can shorten initial disposal time and out-hospital rescuing time, thus improve patients' prognosis. The education level and health knowledge of patients and their relatives directly affect their mode of arriving hospital and prognosis.

  14. Towards a Numerical Description of Volcano Aeroacoustic Source Processes using Lattice Boltzmann Strategies

    Science.gov (United States)

    Brogi, F.; Malaspinas, O.; Bonadonna, C.; Chopard, B.; Ripepe, M.

    2015-12-01

    Low frequency (data can be related to the exit velocity of the volcanic jet and to mass eruption rate, based on the geometric constrain of the vent and the mixture density. However, the application of the classical acoustic source models to volcanic explosive eruptions has shown to be challenging and a better knowledge of the link between the acoustic radiation and actual volcanic fluid dynamics processes is required. New insights into this subject could be given by the study of realistic aeroacoustic numerical simulations of a volcanic jet. Lattice Boltzmann strategies (LBS) provide the opportunity to develop an accurate, computationally fast, 3D physical model for a volcanic jet. In the field of aeroacoustic applications, dedicated LBS has been proven to have the low dissipative properties needed for capturing the weak acoustic pressure fluctuations. However, due to the big disparity in magnitude between the flow and the acoustic disturbances, even weak spurious noise sources in simulations can ruin the accuracy of the acoustic predictions. Reflected waves from artificial boundaries defined around the flow region can have significant influence on the flow field and overwhelm the acoustic field of interest. In addition, for highly multiscale turbulent flows, such as volcanic plumes, the number of grid points needed to represent the smallest scales might become intractable and the most complicated physics happen only in small portions of the computational domain. The implementation of the grid refinement, in our model allow us to insert local finer grids only where is actually needed and to increase the size of the computational domain for running more realistic simulations. 3D LBS model simulations for turbulent jet aeroacoustics have been accurately validated. Both mean flow and acoustic results are in good agreement with theory and experimental data available in the literature.

  15. Unlocking the “black box” of practice improvement strategies to implement surgical safety checklists: a process evaluation

    Directory of Open Access Journals (Sweden)

    Gillespie BM

    2017-04-01

    Full Text Available Brigid M Gillespie,1–3 Kyra Hamilton,4 Dianne Ball,5 Joanne Lavin,6 Therese Gardiner,6 Teresa K Withers,7 Andrea P Marshall1–3 1School of Nursing & Midwifery, Griffith University, Gold Coast, 2Gold Coast University Hospital and Health Service, Southport, 3Nursing & Midwifery Education & Research Unit (NMERU, National Centre of Research Excellence in Nursing, Menzies Health Institute of Queensland, Griffith University, Gold Coast, 4School of Applied Psychology, Griffith University, Mt Gravatt, 5Communio Pty Ltd, Sydney, 6Nursing & Midwifery Education & Research Unit, 7Surgical and Procedural Services, Gold Coast University Hospital and Health Service, Southport, Australia Background: Compliance with surgical safety checklists (SSCs has been associated with improvements in clinical processes such as antibiotic use, correct site marking, and overall safety processes. Yet, proper execution has been difficult to achieve.Objectives: The objective of this study was to undertake a process evaluation of four knowledge translation (KT strategies used to implement the Pass the Baton (PTB intervention which was designed to improve utilization of the SSC. Methods: As part of the process evaluation, a logic model was generated to explain which KT strategies worked well (or less well in the operating rooms of a tertiary referral hospital in Queensland, Australia. The KT strategies implemented included change champions/opinion leaders, education, audit and feedback, and reminders. In evaluating the implementation of these strategies, this study considered context, intervention and underpinning assumptions, implementation, and mechanism of impact. Observational and interview data were collected to assess implementation of the KT strategies relative to fidelity, feasibility, and acceptability. Results: Findings from 35 structured observations and 15 interviews with 96 intervention participants suggest that all of the KT strategies were consistently

  16. Intertextual learning strategy with guided inquiry on solubility equilibrium concept to improve the student’s scientific processing skills

    Science.gov (United States)

    Wardani, K. U.; Mulyani, S.; Wiji

    2018-04-01

    The aim of this study was to develop intertextual learning strategy with guided inquiry on solubility equilibrium concept to enhance student’s scientific processing skills. This study was conducted with consideration of some various studies which found that lack of student’s process skills in learning chemistry was caused by learning chemistry is just a concept. The method used in this study is a Research and Development to generate the intertextual learning strategy with guided inquiry. The instruments used in the form of sheets validation are used to determine the congruence of learning activities by step guided inquiry learning and scientific processing skills with aspects of learning activities. Validation results obtained that the learning activities conducted in line with aspects of indicators of the scientific processing skills.

  17. STRATEGIES SUPPORTING THE HEALTH PROCESS AS EXPERIENCED BY WOMEN WITH A LIFE THREATENING DISEASE AND EXCELLENT NURSES

    DEFF Research Database (Denmark)

    Jensen, Kirsten Pryds

    1999-01-01

    were used, a descriptive phenomenological method, and a descriptive exploratory method. Ten Danish women, suffering from breast cancer, and sixteen Swedish excellent nurses were interviewed. The patients' health strategies appeared to be dependent on their determination to go on living. In the health...... process, it was found imperative that the patient worked actively, created something to live for, and achieved a harmonious relationship with supportive significant others and nature. In the process the patient experienced awareness and avoidance and gained insights about life itself (paper I......). The patients perceived the supportive health strategies performed by the excellent nurse as, being able to "catch their wavelength” and in a positive, genuine, supportive connectedness, transfer knowledge and courage to them (paper II). The nurses perceived the supportive health strategies performed...

  18. Effectiveness of Information Processing Strategy Training on Academic Task Performance in Children with Learning Disabilities: A Pilot Study.

    Science.gov (United States)

    Juntorn, Sutinun; Sriphetcharawut, Sarinya; Munkhetvit, Peeraya

    2017-01-01

    Learning disabilities (LD) can be associated with problems in the four stages of information processing used in learning: input, throughput, output, and feedback. These problems affect the child's ability to learn and perform activities in daily life, especially during academic activities. This study is a pilot study aimed at investigating the effectiveness of information processing strategy training using a combination of two approaches that address the ability to apply processing strategies during academic activities in children with LD. The two approaches are the Perceive, Recall, Plan, and Perform (PRPP) System of Intervention, which is a strategy training intervention, and the Four-Quadrant Model (4QM) of Facilitated Learning approach, which is a systematic facilitator technique. Twenty children with LD were assigned to two groups: the experimental group ( n = 10) and the control group ( n = 10). Children in the experimental group received the intervention twice a week for 6 consecutive weeks. Each treatment session took approximately 50 minutes. Children in the control group received traditional intervention twice a week for 6 consecutive weeks. The results indicated that the combination of the PRPP System of Intervention and the 4QM may improve the participants' ability to apply information processing strategies during academic activities.

  19. Effectiveness of Information Processing Strategy Training on Academic Task Performance in Children with Learning Disabilities: A Pilot Study

    Directory of Open Access Journals (Sweden)

    Sutinun Juntorn

    2017-01-01

    Full Text Available Learning disabilities (LD can be associated with problems in the four stages of information processing used in learning: input, throughput, output, and feedback. These problems affect the child’s ability to learn and perform activities in daily life, especially during academic activities. This study is a pilot study aimed at investigating the effectiveness of information processing strategy training using a combination of two approaches that address the ability to apply processing strategies during academic activities in children with LD. The two approaches are the Perceive, Recall, Plan, and Perform (PRPP System of Intervention, which is a strategy training intervention, and the Four-Quadrant Model (4QM of Facilitated Learning approach, which is a systematic facilitator technique. Twenty children with LD were assigned to two groups: the experimental group (n=10 and the control group (n=10. Children in the experimental group received the intervention twice a week for 6 consecutive weeks. Each treatment session took approximately 50 minutes. Children in the control group received traditional intervention twice a week for 6 consecutive weeks. The results indicated that the combination of the PRPP System of Intervention and the 4QM may improve the participants’ ability to apply information processing strategies during academic activities.

  20. How Well Can Existing Software Support Processes Accomplish Sustainment of a Non-Developmental Item-Based Acquisition Strategy

    Science.gov (United States)

    2017-04-06

    guidance to the PM regarding development and sustainment of software . The need for a strong application of software engineering principles is...on the battlefield by a government- developed network manager application . The configuration of this confluence of software will be jointly managed...How Well Can Existing Software -Support Processes Accomplish Sustainment of a Non- Developmental Item-Based Acquisition Strategy? Graciano

  1. Multi-national knowledge strategies, policy and the upgrading process of regions: Revisiting the automotive industry in Ostrava and Shanghai

    NARCIS (Netherlands)

    Tuijl, E. van; Carvalho, L.; Winden, W. van; Jacobs, W.A.A.

    2012-01-01

    This paper revisits how and why new multinational knowledge-based strategies and multi-level governmental policies influence the upgrading process of regions in developing economies. Automotive multinationals traditionally exploited local asset conditions, but it is shown that they have also been

  2. Simulation modelling of central order processing system under resource sharing strategy in demand-driven garment supply chains

    Science.gov (United States)

    Ma, K.; Thomassey, S.; Zeng, X.

    2017-10-01

    In this paper we proposed a central order processing system under resource sharing strategy for demand-driven garment supply chains to increase supply chain performances. We examined this system by using simulation technology. Simulation results showed that significant improvement in various performance indicators was obtained in new collaborative model with proposed system.

  3. Food safety management systems performance in African food processing companies: a review of deficiencies and possible improvement strategies

    NARCIS (Netherlands)

    Kussaga, J.B.; Jacxsens, L.; Tiisekwa, B.P.M.; Luning, P.A.

    2014-01-01

    This study seeks to provide insight into current deficiencies in food safety management systems (FSMS) in African food-processing companies and to identify possible strategies for improvement so as to contribute to African countries’ efforts to provide safe food to both local and international

  4. Dealing with Feeling: A Meta-Analysis of the Effectiveness of Strategies Derived from the Process Model of Emotion Regulation

    Science.gov (United States)

    Webb, Thomas L.; Miles, Eleanor; Sheeran, Paschal

    2012-01-01

    The present meta-analysis investigated the effectiveness of strategies derived from the process model of emotion regulation in modifying emotional outcomes as indexed by experiential, behavioral, and physiological measures. A systematic search of the literature identified 306 experimental comparisons of different emotion regulation (ER)…

  5. Using Analytic Hierarchy Process for Exploring Prioritization of Functional Strategies in Auto Parts Manufacturing SMEs of Pakistan

    OpenAIRE

    Yasir Ahmad; Danial Saeed Pirzada

    2014-01-01

    This article uses analytical hierarchy process (AHP) to find prioritization of functional strategies (manufacturing, marketing, human resource, and financial management) by small and medium enterprises (SMEs) operating in auto parts manufacturing sector of Pakistan. SMEs are major part of the industrial structure and have significant contribution toward generating jobs in Pakistan. These enterprises are generally famil...

  6. Process and outcomes evaluation of retention strategies within a nursing workforce diversity project.

    Science.gov (United States)

    Escallier, Lori A; Fullerton, Judith T

    2009-09-01

    A commitment to enhancing the diversity of the nursing workforce is reflected in the recruitment and retention strategies designed by Stony Brook University with support of a grant received from the Department of Health and Human Services, Health Resources and Services Administration. Three specific student retention strategies are evaluated in terms of their influence on student inclusion and promotion of student success. A review of the cultural competence of teaching and learning strategies and the promotion of cultural self-awareness underpinned these strategies. A mentorship program designed to provide individual support for students, particularly for those engaged in distance learning, proved to be challenging to implement and underused by students. Students found other means of support in their workplace and through individual connections with the faculty. Instructional programs that enhanced individual skills in the use of computer hardware and software were particularly effective in promoting student success.

  7. A lignocellulosic ethanol strategy via nonenzymatic sugar production: process synthesis and analysis.

    Science.gov (United States)

    Han, Jeehoon; Luterbacher, Jeremy S; Alonso, David Martin; Dumesic, James A; Maravelias, Christos T

    2015-04-01

    The work develops a strategy for the production of ethanol from lignocellulosic biomass. In this strategy, the cellulose and hemicellulose fractions are simultaneously converted to sugars using a γ-valerolactone (GVL) solvent containing a dilute acid catalyst. To effectively recover GVL for reuse as solvent and biomass-derived lignin for heat and power generation, separation subsystems, including a novel CO2-based extraction for the separation of sugars from GVL, lignin and humins have been designed. The sugars are co-fermented by yeast to produce ethanol. Furthermore, heat integration to reduce utility requirements is performed. It is shown that this strategy leads to high ethanol yields and the total energy requirements could be satisfied by burning the lignin. The integrated strategy using corn stover feedstock leads to a minimum selling price of $5 per gallon of gasoline equivalent, which suggests that it is a promising alternative to current biofuels production approaches. Copyright © 2015 Elsevier Ltd. All rights reserved.

  8. Effects of growth conditions and processing on Rehmannia glutinosa using fingerprint strategy

    NARCIS (Netherlands)

    Chang, W.T.; Thissen, U.; Ehlert, K.A.; Koek, M.M.; Jellema, R.H.; Hankemeier, T.; Greef, J. van der; Wang, M.

    2006-01-01

    Metabolite profiling in combination with multivariate statistics is a sophisticated method for quality assessment of natural products. For the development of a quality control strategy in Traditional Chinese Medicine (TCM), we have measured the metabolite fingerprints of Rehmannia glutinosa by

  9. Waste-clearance strategy for DOE waste processed at commercial facilities

    International Nuclear Information System (INIS)

    Chen, S.Y.; Pfingston, M.; LePoire, D.

    1996-01-01

    In May 1991, a moratorium was issued on shipping potentially mixed waste from DOE facilities nationwide to commercial treatment, storage, and disposal facilities. A potential waste-clearance strategy was developed to address the DOE mixed-waste moratorium issues, which had resulted from a lack of exisitng volume contamination regulations. This strategy also has important potential applications for establishing site clearance limits that ensure worker and public risks remain well below regulatory limits

  10. Incorporation of limestone residue from marble processing plant in the city of Cachoeiro do Itapemirim, Espirito Santo, Brazil, in the production of mortars

    International Nuclear Information System (INIS)

    Goncalves, G.P.; Alexandre, J.; Dias, D.P.; Dias Junior, N.S.; Anderson, R.B.

    2010-01-01

    Cachoeiro do Itapemirim city (ES), located 136 km from Vitoria, the state's capital, is the largest ornamental stones producer in Brazil, whose beneficiation produces a large amount of waste that, even today, is responsible for major damages done to the environment. This article aims the experimental study of hydrated lime use (product marketed to be used in mortar) by a residue from marble beneficiation from an industry located in that city. Two mixes were made with cement:sand:hydrated lime and cement:sand:residue. The mortars were evaluated by their properties comparisons in fresh and hardened states, namely: consistency index, mass density and incorporated air content, compressive strength, tensile and bending grip for traction. Chemical and mineralogical analysis by X-ray diffraction were also made. The obtained results met the requirements prescribed by ABNT NBR 13 281 (2005). (author)

  11. Process-Oriented Guided Inquiry Learning Strategy Enhances Students’ Higher Level Thinking Skills in a Pharmaceutical Sciences Course

    Science.gov (United States)

    Verlinden, Nathan; Kruger, Nicholas; Carroll, Ailey; Trumbo, Tiffany

    2015-01-01

    Objective. To determine if the process-oriented guided inquiry learning (POGIL) teaching strategy improves student performance and engages higher-level thinking skills of first-year pharmacy students in an Introduction to Pharmaceutical Sciences course. Design. Overall examination scores and scores on questions categorized as requiring either higher-level or lower-level thinking skills were compared in the same course taught over 3 years using traditional lecture methods vs the POGIL strategy. Student perceptions of the latter teaching strategy were also evaluated. Assessment. Overall mean examination scores increased significantly when POGIL was implemented. Performance on questions requiring higher-level thinking skills was significantly higher, whereas performance on questions requiring lower-level thinking skills was unchanged when the POGIL strategy was used. Student feedback on use of this teaching strategy was positive. Conclusion. The use of the POGIL strategy increased student overall performance on examinations, improved higher-level thinking skills, and provided an interactive class setting. PMID:25741027

  12. Differential-associative processing or example elaboration: Which strategy is best for learning the definitions of related and unrelated concepts?

    Science.gov (United States)

    Hannon, Brenda

    2012-10-01

    Definitions of related concepts (e.g., genotype - phenotype ) are prevalent in introductory classes. Consequently, it is important that educators and students know which strategy(s) work best for learning them. This study showed that a new comparative elaboration strategy, called differential-associative processing, was better for learning definitions of related concepts than was an integrative elaborative strategy, called example elaboration. This outcome occurred even though example elaboration was administered in a naturalistic way (Experiment 1) and students spent more time in the example elaboration condition learning (Experiments 1, 2, 3), and generating pieces of information about the concepts (Experiments 2 and 3). Further, with unrelated concepts ( morpheme-fluid intelligence ), performance was similar regardless if students used differential-associative processing or example elaboration (Experiment 3). Taken as a whole, these results suggest that differential-associative processing is better than example elaboration for learning definitions of related concepts and is as good as example elaboration for learning definitions of unrelated concepts.

  13. Performance evaluation of a full-scale advanced phase isolation ditch process by using real-time control strategies

    International Nuclear Information System (INIS)

    Kim, Hyosoo; Kim, Yejin; Kim, Minsoo; Piao, Wenhua; Kim, Changwon; Gee, Jeasung

    2014-01-01

    This paper proposes real-time control strategies that can be applied in a full-scale advanced phase isolation ditch (APID) process. Real-time operation mode control (OMC) and aeration section control (ASC) strategies were developed to cope more stably with fluctuations in the influent loading and to increase the nitrification and denitrification reactions within the entire volume. The real-time OMC and ASC strategies were evaluated using mathematical models. When the NH 4 -N in the reactor was maintained at a high level, appropriate control actions, such as continuing the aeration state, stopping the influent inflow and increasing the aeration section, were applied in the APID process. In contrast, when the NO X -N in the reactor was maintained at a high level, the non-aeration state, influent inflow, and decreased aeration section were continued. It was concluded that stable operation in the APID process could be achieved by applying real-time OMC and ASC strategies developed in this study

  14. Performance evaluation of a full-scale advanced phase isolation ditch process by using real-time control strategies

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Hyosoo; Kim, Yejin; Kim, Minsoo; Piao, Wenhua; Kim, Changwon [Pusan National University, Busan (Korea, Republic of); Gee, Jeasung [Taiwha Industrial Co. Ltd., Seoul (Korea, Republic of)

    2014-04-15

    This paper proposes real-time control strategies that can be applied in a full-scale advanced phase isolation ditch (APID) process. Real-time operation mode control (OMC) and aeration section control (ASC) strategies were developed to cope more stably with fluctuations in the influent loading and to increase the nitrification and denitrification reactions within the entire volume. The real-time OMC and ASC strategies were evaluated using mathematical models. When the NH{sub 4}-N in the reactor was maintained at a high level, appropriate control actions, such as continuing the aeration state, stopping the influent inflow and increasing the aeration section, were applied in the APID process. In contrast, when the NO{sub X}-N in the reactor was maintained at a high level, the non-aeration state, influent inflow, and decreased aeration section were continued. It was concluded that stable operation in the APID process could be achieved by applying real-time OMC and ASC strategies developed in this study.

  15. Optimizing Compliance and Thermal Conductivity of Plasma Sprayed Thermal Barrier Coatings via Controlled Powders and Processing Strategies

    Science.gov (United States)

    Tan, Yang; Srinivasan, Vasudevan; Nakamura, Toshio; Sampath, Sanjay; Bertrand, Pierre; Bertrand, Ghislaine

    2012-09-01

    The properties and performance of plasma-sprayed thermal barrier coatings (TBCs) are strongly dependent on the microstructural defects, which are affected by starting powder morphology and processing conditions. Of particular interest is the use of hollow powders which not only allow for efficient melting of zirconia ceramics but also produce lower conductivity and more compliant coatings. Typical industrial hollow spray powders have an assortment of densities resulting in masking potential advantages of the hollow morphology. In this study, we have conducted process mapping strategies using a novel uniform shell thickness hollow powder to control the defect microstructure and properties. Correlations among coating properties, microstructure, and processing reveal feasibility to produce highly compliant and low conductivity TBC through a combination of optimized feedstock and processing conditions. The results are presented through the framework of process maps establishing correlations among process, microstructure, and properties and providing opportunities for optimization of TBCs.

  16. A Quasi-Dynamic Optimal Control Strategy for Non-Linear Multivariable Processes Based upon Non-Quadratic Objective Functions

    Directory of Open Access Journals (Sweden)

    Jens G. Balchen

    1984-10-01

    Full Text Available The problem of systematic derivation of a quasi-dynamic optimal control strategy for a non-linear dynamic process based upon a non-quadratic objective function is investigated. The wellknown LQG-control algorithm does not lead to an optimal solution when the process disturbances have non-zero mean. The relationships between the proposed control algorithm and LQG-control are presented. The problem of how to constrain process variables by means of 'penalty' - terms in the objective function is dealt with separately.

  17. Decision Making Under Objective Risk Conditions-a Review of Cognitive and Emotional Correlates, Strategies, Feedback Processing, and External Influences.

    Science.gov (United States)

    Schiebener, Johannes; Brand, Matthias

    2015-06-01

    While making decisions under objective risk conditions, the probabilities of the consequences of the available options are either provided or calculable. Brand et al. (Neural Networks 19:1266-1276, 2006) introduced a model describing the neuro-cognitive processes involved in such decisions. In this model, executive functions associated with activity in the fronto-striatal loop are important for developing and applying decision-making strategies, and for verifying, adapting, or revising strategies according to feedback. Emotional rewards and punishments learned from such feedback accompany these processes. In this literature review, we found support for the role of executive functions, but also found evidence for the importance of further cognitive abilities in decision making. Moreover, in addition to reflective processing (driven by cognition), decisions can be guided by impulsive processing (driven by anticipation of emotional reward and punishment). Reflective and impulsive processing may interact during decision making, affecting the evaluation of available options, as both processes are affected by feedback. Decision-making processes are furthermore modulated by individual attributes (e.g., age), and external influences (e.g., stressors). Accordingly, we suggest a revised model of decision making under objective risk conditions.

  18. Advanced model-based control strategies for the intensification of upstream and downstream processing in mAb production.

    Science.gov (United States)

    Papathanasiou, Maria M; Quiroga-Campano, Ana L; Steinebach, Fabian; Elviro, Montaña; Mantalaris, Athanasios; Pistikopoulos, Efstratios N

    2017-07-01

    Current industrial trends encourage the development of sustainable, environmentally friendly processes with minimal energy and material consumption. In particular, the increasing market demand in biopharmaceutical industry and the tight regulations in product quality necessitate efficient operating procedures that guarantee products of high purity. In this direction, process intensification via continuous operation paves the way for the development of novel, eco-friendly processes, characterized by higher productivity and lower production costs. This work focuses on the development of advanced control strategies for (i) a cell culture system in a bioreactor and (ii) a semicontinuous purification process. More specifically, we consider a fed-batch culture of GS-NS0 cells and the semicontinuous Multicolumn Countercurrent Solvent Gradient Purification (MCSGP) for the purification process. The controllers are designed following the PAROC framework/software platform and their capabilities are assessed in silico, against the process models. It is demonstrated that the proposed controllers efficiently manage to increase the system productivity, returning strategies that can lead to continuous, stable process operation. © 2017 American Institute of Chemical Engineers Biotechnol. Prog., 33:966-988, 2017. © 2017 American Institute of Chemical Engineers.

  19. Integrating sodium reduction strategies in the procurement process and contracting of food venues in the County of Los Angeles government, 2010-2012.

    Science.gov (United States)

    Cummings, Patricia L; Kuo, Tony; Gase, Lauren N; Mugavero, Kristy

    2014-01-01

    Since sodium is ubiquitous in the food supply, recent approaches to sodium reduction have focused on increasing the availability of lower-sodium products through system-level and environmental changes. This article reviews integrated efforts by the Los Angeles County Sodium Reduction Initiative to implement these strategies at food venues in the County of Los Angeles government. The review used mixed methods, including a scan of the literature, key informant interviews, and lessons learned during 2010-2012 to assess program progress. Leveraging technical expertise and shared resources, the initiative strategically incorporated sodium reduction strategies into the overall work plan of a multipartnership food procurement program in Los Angeles County. To date, 3 County departments have incorporated new or updated nutrition requirements that included sodium limits and other strategies. The strategic coupling of sodium reduction to food procurement and general health promotion allowed for simultaneous advancement and acceleration of the County's sodium reduction agenda.

  20. Integrating Sodium Reduction Strategies in the Procurement Process and Contracting of Food Venues in the County of Los Angeles Government, 2010–2012

    Science.gov (United States)

    Cummings, Patricia L.; Kuo, Tony; Gase, Lauren N.; Mugavero, Kristy

    2015-01-01

    Since sodium is ubiquitous in the food supply, recent approaches to sodium reduction have focused on increasing the availability of lower-sodium products through system-level and environmental changes. This article reviews integrated efforts by the Los Angeles County Sodium Reduction Initiative to implement these strategies at food venues in the County of Los Angeles government. The review used mixed methods, including a scan of the literature, key informant interviews, and lessons learned during 2010–2012 to assess program progress. Leveraging technical expertise and shared resources, the initiative strategically incorporated sodium reduction strategies into the overall work plan of a multipartnership food procurement program in Los Angeles County. To date, 3 County departments have incorporated new or updated nutrition requirements that included sodium limits and other strategies. The strategic coupling of sodium reduction to food procurement and general health promotion allowed for simultaneous advancement and acceleration of the County’s sodium reduction agenda. PMID:24322811

  1. The Grieving Process in Children: Strategies for Understanding, Educating, and Reconciling Children's Perceptions of Death.

    Science.gov (United States)

    Willis, Clarissa A.

    2002-01-01

    Provides an overview of how young children understand death, and offers concrete strategies for talking to children about death and suggestions for teachers about how to help children of various ages through grief and mourning. Highlights developmental differences in four components of children's understanding of death: irreversibility, finality,…

  2. Decision Making and Behavioral Strategy: The role of regulatory focus in corporate innovation processes

    NARCIS (Netherlands)

    I.A. Tunçdoğan (Aybars)

    2014-01-01

    markdownabstract__Abstract__ This dissertation makes use of the behavioral strategy perspective in order to examine a number of constructs pertaining to innovation in corporate settings. In particular, the dissertation consists of four studies; one conceptual and three empirical. The conceptual

  3. A Think-Aloud Protocols Investigation of Dictionary Processing Strategies among Saudi EFL Students

    Science.gov (United States)

    Alhaysony, Maha

    2012-01-01

    This paper aims to examine qualitatively how Saudi EFL female students look-up word meanings in their dictionaries while reading. We aimed to identify and describe the look-up strategies used by these students. The subjects of the study were ten third-year English major students. A think-aloud protocol was used in order to gain insights into the…

  4. Elementary Principals' Strategies for Managing the Educational Technology Refresh Process: A Case Study

    Science.gov (United States)

    Denton, Edward A.

    2011-01-01

    Increased uses of educational technology by students and teachers in recent years have compelled elementary principals to expand educational technology resources and replace educational technology resources at the end of it's service life. The purpose of this study was to investigate strategies and practices employed by elementary principals…

  5. An interoperable architecture and principles for implementing strategy and policy in operational processes

    NARCIS (Netherlands)

    Gong, Y.; Janssen, M.

    2013-01-01

    In today's economy managers expect new strategies and policies to be implemented quickly. Yet practice shows that current systems are not able to implement changes within a short time frame. Nowadays a variety of technologies including semantic web services, business rules and software agents are

  6. Enhancement Process of Didactic Strategies in a Degree Course for Pre-Service Teachers

    Science.gov (United States)

    Garcias, Adolfina Pérez; Marín, Victoria I.

    2017-01-01

    This paper presents a study on the enhancement of didactic strategies based on the idea of personal learning environments (PLE). It was conducted through three iterative cycles during three consecutive academic years according to the phases of design-based research applied to teaching in a university course for pre-service teachers in the…

  7. Increasing Adolescent Self-Esteem: Group Strategies to Address Wellness and Process

    Science.gov (United States)

    Mills, Bethany; McBride, Dawn Lorraine

    2016-01-01

    The authors present a therapeutic resource for school counselors who need a tangible method to integrate self-esteem strategies into their psychoeducational group programs. The focus of the group is a comprehensive wellness model based on five senses of self and how each self must be addressed to promote healthy life decisions. Special attention…

  8. "What Happened Before?" "What Happened After?" The Value and Process of Visual Thinking Strategies

    Science.gov (United States)

    Williams, Heidi; Burns, Claudia; Daisey, Peggy

    2016-01-01

    (Purpose) The purpose of this paper is to describe visual literacy and an adapted version of Visual Thinking Strategy (VTS) and its value to enhance students' inferential thinking. (Methodology) An example of a middle school VTS, art-integrated lesson is described as well as reflections of a middle school language arts teacher about what she…

  9. Mobile Air Monitoring Data Processing Strategies and Effects on Spatial Air Pollution Trends

    Science.gov (United States)

    The collection of real-time air quality measurements while in motion (i.e., mobile monitoring) is currently conducted worldwide to evaluate in situ emissions, local air quality trends, and air pollutant exposure. This measurement strategy pushes the limits of traditional data an...

  10. Strategies to mitigate peanut allergy: production, processing, utilization, and immunotherapy considerations

    Science.gov (United States)

    Peanut (Arachis hypogaea L.) is an important crop grown worldwide for food and edible oil. The surge of peanut allergy in the past 25 years has profoundly impacted both affected individuals and the peanut and related food industries. In response, several strategies to mitigate peanut allergy have em...

  11. Effective sulfur and energy recovery from hydrogen sulfide through incorporating an air-cathode fuel cell into chelated-iron process.

    Science.gov (United States)

    Sun, Min; Song, Wei; Zhai, Lin-Feng; Cui, Yu-Zhi

    2013-12-15

    The chelated-iron process is among the most promising techniques for the hydrogen sulfide (H2S) removal due to its double advantage of waste minimization and resource recovery. However, this technology has encountered the problem of chelate degradation which made it difficult to ensure reliable and economical operation. This work aims to develop a novel fuel-cell-assisted chelated-iron process which employs an air-cathode fuel cell for the catalyst regeneration. By using such a process, sulfur and electricity were effectively recovered from H2S and the problem of chelate degradation was well controlled. Experiment on a synthetic sulfide solution showed the fuel-cell-assisted chelated-iron process could maintain high sulfur recovery efficiencies generally above 90.0%. The EDTA was preferable to NTA as the chelating agent for electricity generation, given the Coulombic efficiencies (CEs) of 17.8 ± 0.5% to 75.1 ± 0.5% for the EDTA-chelated process versus 9.6 ± 0.8% to 51.1 ± 2.7% for the NTA-chelated process in the pH range of 4.0-10.0. The Fe (III)/S(2-) ratio exhibited notable influence on the electricity generation, with the CEs improved by more than 25% as the Fe (III)/S(2-) molar ratio increased from 2.5:1 to 3.5:1. Application of this novel process in treating a H2S-containing biogas stream achieved 99% of H2S removal efficiency, 78% of sulfur recovery efficiency, and 78.6% of energy recovery efficiency, suggesting the fuel-cell-assisted chelated-iron process was effective to remove the H2S from gas streams with favorable sulfur and energy recovery efficiencies. Copyright © 2013 Elsevier B.V. All rights reserved.

  12. Cognitive Processes and Learner Strategies in the Acquisition of Motor Skills

    Science.gov (United States)

    1978-12-01

    children: Capacity or processing deficits? Memory and Cognition, 1976, 4, 559-S72. Craik , F. I. M., & Lockhart , R. S. Levels of processing : A framework...learning and memory research. In F. I. M. Craik & L. S. Cermak (Eds.), Levels of processing and theories of memory. Hillsdale, N. J.: Erlbaum, 1978...functions. Cognitive activities are described at a highly theoretical (technical) level as well as in a pragmatic manner. Differences in processing

  13. Selecting the most appropriate maintenance strategies using fuzzy Analytic Network Process: A case study of Saipa vehicle industry

    Directory of Open Access Journals (Sweden)

    Mina Rahimi

    2014-04-01

    Full Text Available It is necessary for companies and industries to select the most appropriate maintenance strategy to increase the reliability and safety level with reasonable cost. The primary objective of this paper is to assess different maintenance strategies and to select the best and the most appropriate alternatives for Saipa vehicle industry in Tehran, Iran. For this purpose, we simultaneously consider numerous conflicting objectives and constraints. In this study to counter with this conflicting and to consider the dependency among the qualitative and quantitative criteria and sub-criteria, an integration of Analytic Network Process (ANP and fuzzy set theory are considered. Therefore, factors playing important role in selecting the best maintenance strategy are determined by reviewing the research literature and interviewing with the experts by Delphi technique. Considering the relations among different factors, a network with 4 criteria and 28 sub-criteria are proposed. In the next step, ANP technique is applied for ranking effective factors in evolution of appropriate maintenance strategy. Results reveal that the best maintenance strategy for fixture body of pride (setter is corrective maintenance.

  14. Justification of the Trade Enterprises Development Strategy in the Process of Strategic Management of the Marketing Potential

    Directory of Open Access Journals (Sweden)

    Grosul Viktoriya A.

    2013-11-01

    Full Text Available The article justifies a necessity of strategic management of marketing potential of retail trade enterprises. The article develops a general structural and logic scheme of the process of strategic management of the marketing potential of a trade enterprise taking into account specific features of the trade industry. It establishes that the main key issue in the theory of strategic management is argumentation of selection of the basic strategy of development of a subject of economy. It justifies a scientific and methodical approach to selection of the basic strategy of development of a trade enterprise in the process of management of the marketing potential, main stages of which are: assessment of the level of loyalty of external marketing environment; identification of marketing stratagems; and selection of the enterprise development strategy. The article offers to use the model of marketing stratagem, the components of which are policy of management of the marketing potential, strategic market position of the enterprise and level of loyalty of external marketing environment. The article develops an interactive strategic cube of formation of the complex of marketing stratagems on the basis of use of which marketing stratagems for various trade networks of the Kharkiv region are identified and strategies of their further development are justified.

  15. Phenol-Explorer 3.0: a major update of the Phenol-Explorer database to incorporate data on the effects of food processing on polyphenol content

    Science.gov (United States)

    Rothwell, Joseph A.; Perez-Jimenez, Jara; Neveu, Vanessa; Medina-Remón, Alexander; M'Hiri, Nouha; García-Lobato, Paula; Manach, Claudine; Knox, Craig; Eisner, Roman; Wishart, David S.; Scalbert, Augustin

    2013-01-01

    Polyphenols are a major class of bioactive phytochemicals whose consumption may play a role in the prevention of a number of chronic diseases such as cardiovascular diseases, type II diabetes and cancers. Phenol-Explorer, launched in 2009, is the only freely available web-based database on the content of polyphenols in food and their in vivo metabolism and pharmacokinetics. Here we report the third release of the database (Phenol-Explorer 3.0), which adds data on the effects of food processing on polyphenol contents in foods. Data on >100 foods, covering 161 polyphenols or groups of polyphenols before and after processing, were collected from 129 peer-reviewed publications and entered into new tables linked to the existing relational design. The effect of processing on polyphenol content is expressed in the form of retention factor coefficients, or the proportion of a given polyphenol retained after processing, adjusted for change in water content. The result is the first database on the effects of food processing on polyphenol content and, following the model initially defined for Phenol-Explorer, all data may be traced back to original sources. The new update will allow polyphenol scientists to more accurately estimate polyphenol exposure from dietary surveys. Database URL: http://www.phenol-explorer.eu PMID:24103452

  16. Microstructure development and mechanical properties of quenching and partitioning (Q and P) steel and an incorporation of hot-dipping galvanization during Q and P process

    Energy Technology Data Exchange (ETDEWEB)

    Sun, Jing; Yu, Hao, E-mail: yhzhmr@126.com

    2013-12-01

    The “quenching and partitioning” (Q and P) process has recently been substantiated to be a unique technological route for the production of high strength steels with significant amounts of retained austenite, and thus to provide better combination of strength and ductility. In this work, intercritically annealed specimens followed by Q and P treatment have been applied to low-carbon steel with chemical composition typical for conventional TRIP-assisted steels. Microstructure of the steel treated by the Q and P process was characterized by means of optical microscope, SEM, TEM and XRD. The study suggests that microstructure is mainly composed of ferrite, lath martensite, martensite–austenite islands, retained austenite and a small amount of bainite formed during partitioning. The fraction of bainite formed during partitioning is proportional to quenching temperature. The mechanical property of specimen treated by the Q and P process exhibits an improved combination of strength and ductility than that of the Q and T process. Two schemes of hot-dipping galvanization processes were designed. The results indicate that both hot-dip galvanizing schemes present a limited reduction in tensile strength and a slight enhancement of ductility. The scheme of galvanizing and partitioning after the quenching progress shows a better combination of strength and ductility.

  17. Phenol-Explorer 3.0: a major update of the Phenol-Explorer database to incorporate data on the effects of food processing on polyphenol content.

    Science.gov (United States)

    Rothwell, Joseph A; Perez-Jimenez, Jara; Neveu, Vanessa; Medina-Remón, Alexander; M'hiri, Nouha; García-Lobato, Paula; Manach, Claudine; Knox, Craig; Eisner, Roman; Wishart, David S; Scalbert, Augustin

    2013-01-01

    Polyphenols are a major class of bioactive phytochemicals whose consumption may play a role in the prevention of a number of chronic diseases such as cardiovascular diseases, type II diabetes and cancers. Phenol-Explorer, launched in 2009, is the only freely available web-based database on the content of polyphenols in food and their in vivo metabolism and pharmacokinetics. Here we report the third release of the database (Phenol-Explorer 3.0), which adds data on the effects of food processing on polyphenol contents in foods. Data on >100 foods, covering 161 polyphenols or groups of polyphenols before and after processing, were collected from 129 peer-reviewed publications and entered into new tables linked to the existing relational design. The effect of processing on polyphenol content is expressed in the form of retention factor coefficients, or the proportion of a given polyphenol retained after processing, adjusted for change in water content. The result is the first database on the effects of food processing on polyphenol content and, following the model initially defined for Phenol-Explorer, all data may be traced back to original sources. The new update will allow polyphenol scientists to more accurately estimate polyphenol exposure from dietary surveys.

  18. On the expected discounted penalty functions for two classes of risk processes under a threshold dividend strategy

    Science.gov (United States)

    Lu, Zhaoyang; Xu, Wei; Sun, Decai; Han, Weiguo

    2009-10-01

    In this paper, the discounted penalty (Gerber-Shiu) functions for a risk model involving two independent classes of insurance risks under a threshold dividend strategy are developed. We also assume that the two claim number processes are independent Poisson and generalized Erlang (2) processes, respectively. When the surplus is above this threshold level, dividends are paid at a constant rate that does not exceed the premium rate. Two systems of integro-differential equations for discounted penalty functions are derived, based on whether the surplus is above this threshold level. Laplace transformations of the discounted penalty functions when the surplus is below the threshold level are obtained. And we also derive a system of renewal equations satisfied by the discounted penalty function with initial surplus above the threshold strategy via the Dickson-Hipp operator. Finally, analytical solutions of the two systems of integro-differential equations are presented.

  19. Global Strategy

    DEFF Research Database (Denmark)

    Li, Peter Ping

    2013-01-01

    Global strategy differs from domestic strategy in terms of content and process as well as context and structure. The content of global strategy can contain five key elements, while the process of global strategy can have six major stages. These are expounded below. Global strategy is influenced...... by rich and complementary local contexts with diverse resource pools and game rules at the national level to form a broad ecosystem at the global level. Further, global strategy dictates the interaction or balance between different entry strategies at the levels of internal and external networks....

  20. Feasibility of an implementation strategy for the integration of health promotion in routine primary care: a quantitative process evaluation.

    Science.gov (United States)

    Sanchez, Alvaro; Grandes, Gonzalo; Cortada, Josep M; Pombo, Haizea; Martinez, Catalina; Corrales, Mary Helen; de la Peña, Enrique; Mugica, Justo; Gorostiza, Esther

    2017-02-17

    Process evaluation is recommended to improve the understanding of underlying mechanisms related to clinicians, patients, context and intervention delivery that may impact on trial or program results, feasibility and transferability to practice. The aim of this study was to assess the feasibility of the Prescribe Healthy Life (PVS from the Spanish "Prescribe Vida Saludable") implementation strategy for enhancing the adoption and implementation of an evidence-based health promotion intervention in primary health care. A descriptive study of 2-year implementation indicators for the PVS clinical intervention was conducted in four primary health care centers. A multifaceted collaborative modeling implementation strategy was developed to enhance the integration of a clinical intervention to promote healthy lifestyles into clinical practice. Process indicators were assessed for intervention reach, adoption, implementation, sustainability and their variability at center, practice, and patient levels. Mean rates of adoption by means of active collaboration among the three main professional categories (family physicians, nurses and administrative personnel) were 75% in all centers. Just over half of the patients that attended (n = 11650; 51.9%) were reached in terms of having their lifestyle habits assessed, while more than a third (33.7%; n = 7433) and almost 10% (n = 2175) received advice or a printed prescription for at least one lifestyle change, respectively. Only 3.7% of the target population received a repeat prescription. These process indicators significantly (p implementation period within centers. The implementation strategy used showed moderate-to-good performance on process indicators related to adoption, reach, and implementation of the evidence-based healthy lifestyle promotion intervention in the context of routine primary care. Sources of heterogeneity and instability in these indicators may improve our understanding of factors required to

  1. International magazines and journals (National Geographic and Reader'sDigest) launched at the Czech market: transfer strategies and processes

    OpenAIRE

    Gallóová, Markéta

    2011-01-01

    This study has aimed at describing the strategies and processes that apply during the introduction of international magazines to the Czech market. We have chosen the well-known and widely read, truly international magazines National Geographic and Reader's Digest as our material. We have focused on the role of these magazines in the interaction of cultures (Czech and American). We have realized that this area of translatological knowledge has not yet been analysed thoroughly enough. There are...

  2. Exploring EFL Students’ Reading Comprehension Process through Their Life Experiences and the Sight Word Strategy

    Directory of Open Access Journals (Sweden)

    Jennifer Camargo

    2010-12-01

    Full Text Available Due to the role language and literature play in the construction of social, economic and cultural systems, reading comprehension has become a growing challenge. This study examined how the relationship between English as a foreign language reading comprehension and life experiences while using the Sight Word Strategy could prove significant. Fifth graders at a public school in Bogotá participated in this study. Data were collected using tape recordings, field notes, archival data and students’ reflections. Analysis indicated that comprehension and construction of meaning were generated by sharing life experiences and through the interaction produced in each one of the Sight Word Strategy stages. The study suggested further research into a more encompassing definition of reading comprehension and life experiences correlation as an appropriate goal for English as a foreign language.

  3. From Tragedy To Strategy: Assessing The FDNY’s Post 9/11 Strategic Planning Process

    Science.gov (United States)

    2016-12-01

    and analytical perspective in leaders and managers to synthesize strategies for its future. The recommendations all focus on improving the strategic ... Strategic Planning,” Harvard Business Review, January– February (1994), https://hbr.org/1994/01/the-fall-and-rise-of- strategic -planning; Lawrence, Strategic ...Interdependency between Organization, Performance and Strategic Planning (Berlin: Springer Science & Business Media, 2013), 56. 56 Mintzberg, “The Fall and

  4. Valuing Treatments for Parkinson Disease Incorporating Process Utility: Performance of Best-Worst Scaling, Time Trade-Off, and Visual Analogue Scales

    NARCIS (Netherlands)

    Weernink, Marieke Geertruida Maria; Groothuis-Oudshoorn, Catharina Gerarda Maria; IJzerman, Maarten Joost; van Til, Janine Astrid

    2016-01-01

    Objective The objective of this study was to compare treatment profiles including both health outcomes and process characteristics in Parkinson disease using best-worst scaling (BWS), time trade-off (TTO), and visual analogue scales (VAS). Methods From the model comprising of seven attributes with

  5. Optimization on cooperative feed strategy for radial–axial ring rolling process of Inco718 alloy by RSM and FEM

    Directory of Open Access Journals (Sweden)

    Zhu Xinglin

    2016-06-01

    Full Text Available During radial–axial ring rolling process, cooperative strategy of the radial–axial feed is critical for dimensional accuracy and thermo mechanical parameters distribution of the formed ring. In order to improve the comprehensive quality of the ring parts, response surface method (RSM is employed for the first time to optimize the cooperative feed strategy for radial–axial ring rolling process by combining it with an improved and verified 3D coupled thermo-mechanical finite element model. The feed trajectory is put forward to describe cooperative relationship of the radial–axial feed and three variables are designed based on the feed trajectory. In order to achieve multi-objective optimization, four responses including thermo mechanical parameters distribution and rolling force are proposed. Based on the FEM results, RSM is used to establish a response model to depict the function relationship between the objective response and design variables. Through this approximate model, effects of different variables on ring rolling process are analyzed connectedly and optimal feed strategy is obtained by resorting to the optimal chart specific to a constraint condition.

  6. PEMILIHAN STRATEGI PEMASARAN PADA PT. NYONYA MENEER DENGAN MENGGUNAKAN PENDEKATAN METODE ANALYTICAL NETWORK PROCESS (ANP DAN TECHNIQUE FOR ORDER PREFERENCE BY SIMILARITY TO AN IDEAL SOLUTION (TOPSIS

    Directory of Open Access Journals (Sweden)

    Ary Arvianto

    2014-01-01

    Full Text Available Dalam mencapai suatu keunggulan kompetitif, suatu perusahaan membutuhkan suatu strategi pemasaran untuk membedakan dan memiliki nilai yang berbeda dari kompetitornya. Karena krusialnya peran strategi pemasaran dalam kelangsungan perusahaan, pihak manajemen akan mengalami kesulitan dalam memilih strategi pemasaran terbaik dari pilihan strategi yang ada. PT. Nyonya Meneer memproduksi banyak jenis produk, salah satu jenis produk unggulannya adalah produk jamu untuk wanita. Penjualan produk jamu wanita tidak menunjukkan peningkatan yang sesuai dengan target, bahkan cenderung stagnan. Kondisi ini menunjukkan bahwa strategi pemasaran yang selama ini diterapkan belum memberikan hasil yang maksimal karena tidak tercapainya target penjualan yang ada. Oleh karena itu, perlu adanya suatu pemilihan strategi pemasaran PT. Nyonya Meneer dengan melihat kriteria-kriteria yang mempengaruhi dalam proses pemilihan strategi pemasaran dengan menggunakan metode Analytical Network Process (ANP dan TOPSIS. Alternatif strategi pemasaran pada penelitian ini berdasarkan strategi generik Porter. Hasil dari penelitian ini adalah bahwa strategi terpilih bagi PT. Nyonya Meneer adalah strategi segmentasi. Segmen yang direkomendasikan adalah wanita remaja hingga dewasa dengan pendapatan menengah dan menengah ke atas. Kata Kunci : analytical network process (ANP, pemilihan strategi pemasaran, strategi generik porter, TOPSIS Abstract In achieving competitive advantage, a company need a marketing strategy in order to differentiate from its competitor. A marketing strategy decision making is essential for marketing strategist to determine the most appropriate marketing strategy in effecient manner. PT. Nyonya Meneer is one of the biggest company that produce jamu in Indonesia. Jamu for women is the most popular product of PT. Nyonya Meneer. Sales of jamu for women does not show desirable increase, even tend to stagnan. It indicates  that current marketing strategy does not give

  7. A Conceptual Discussion of the Strategy Process in Organizations: Formulation and Formation of StrategyHttp://Dx.Doi.Org/10.5585/Riae.V10i1.1711

    Directory of Open Access Journals (Sweden)

    Mônica Külkamp Beppler

    2011-06-01

    Full Text Available This article aims to address the strategy process within organizations, in light of the terminologies of strategic formulation and formation. The purpose is to elucidate the understanding of persistently used terms, occasionally causing a lack of interpretation of what is actually exposed about the strategy process, i.e., the variations between adopting i classic strategies, which call for different stages of formulation and implementation, and ii emerging strategies, or those having a procedural nature, performed in response to environmental changes. The present article also targets clarifying the characteristics of each approach through the theoretical construct of authors. This research is characterized as a descriptive study, predominantly qualitative and where the collected data were obtained through a literature review. Through analysis of the most prominent authors on strategy, it was found that the differences between strategic formulation and formation are not limited to the used terminology. Said approaches have significant differences within the entire strategy process, differing mainly in how they occur within organizations: in strategic formulation, there is a prescriptive, deliberate and rational process, whereas in strategic formation, emphasis on description exists, and the strategy is an emergent, unintentional process, consolidated by a series of patterns of decisions over time. Finally, perceiving the distinction between the two approaches is considered fundamental for the understanding of strategy in organizations, especially in regard to variables potentially influencing its process.

  8. Under what conditions can a nonprescription drug label serve as refutation text? The role of directed attention and processing strategy

    Directory of Open Access Journals (Sweden)

    Michael P Ryan

    2017-09-01

    Full Text Available Nonprescription drug labels are relatively ineffective in refuting drug misconceptions. We sought to improve the effectiveness of an aspirin label as a refutation text by manipulating selective attention and label-processing strategy. After reading a facsimile label, those of 196 undergraduates who attempted to explain why shaded drug facts are “easily confused” recalled more refuting drug facts than participants who attempted to explain why those facts are “easily ignored.” However, “easily confused” processing did not change truth ratings of misconceptions associated with those drug facts. We conclude that refuted misconceptions remain in memory but are inhibited by disconfirming drug facts.

  9. Social tagging as a knowledge collecting strategy in the engineering design change process

    OpenAIRE

    Alduchin-Quintero, G.; Contero, Manuel

    2012-01-01

    This article focuses on analysing the feasibility of using social tagging as a tool for knowledge collection and retrieval in the context of the product development process (PDP). This process is a social activity that involves groups of individuals who share a common goal: to design a product . Traditional knowledge-based systems (KBS) are not very well suited to capture the tacit knowledge that is embedded in this process. Social tagging is proposed in this article as the mechanism to exte...

  10. Design strategy for optimal iterative learning control applied on a deep drawing process

    DEFF Research Database (Denmark)

    Endelt, Benny Ørtoft

    2017-01-01

    Metal forming processes in general can be characterised as repetitive processes; this work will take advantage of this characteristic by developing an algorithm or control system which transfers process information from part to part, reducing the impact of repetitive uncertainties, e.g. a gradual...... changes in the material properties. The process is highly non-linear and the system plant is modelled using a non-linear finite element and the gain factors for the iterative learning controller is identified solving a non-linear optimal control problem. The optimal control problem is formulated as a non...

  11. Identifying and ranking of strategies to implement green supply chain management in Indian manufacturing industry using Analytical Hierarchy Process

    Directory of Open Access Journals (Sweden)

    Sunil Luthra

    2013-09-01

    Full Text Available Purpose – The study aims to identify and rank the major strategies that help achieve successful implementation of Green Supply Chain Management (GSCM in Indian manufacturing industry.Design/methodology/approach – Strategies to implement GSCM have been identified thorough extensive literature review and then experts’ opinion is sought for categorizing them into four representative dimensions which are then ranked using Analytic Hierarchy Process (AHP.Findings – The study categorizes the GSCM implementation strategies into four dimensions - Non members of supply chain, downward stream supply chain Members, Organizational members of supply chain and upward stream supply chain members. These dimensions are found to play an important role in greening the supply chains enabling the practicing firms achieve enhanced operational performances.Research limitations/implications- AHP is used for ranking the GSCM implementation strategies in Indian manufacturing scenario. The pair-wise comparisons are made on the basis of the opinion of the experts drawn from academia and industry. As is natural, opinions of experts may not always be free from bias or prejudices. Moreover, the study relied more on the GSCM practices literature in developed nations as only limited literature related to the undertaken work in the Indian context was available.Practical implications – This paper may play important role in understanding various strategies and ranking them in order of importance. This facilitates firms prioritize different actions for achieving high GSCM performances in Indian manufacturing industry. Strategic implementation of green supply chain management will help Indian manufacturing enterprises enjoy cost and efficiency benefits.Originality/value – GSCM is a relatively new topic for majority of Indian manufacturing industries. This work is likely to help GSCM practitioners select suitable strategies in consonance with the government regulations

  12. Valuing Treatments for Parkinson Disease Incorporating Process Utility: Performance of Best-Worst Scaling, Time Trade-Off, and Visual Analogue Scales.

    Science.gov (United States)

    Weernink, Marieke G M; Groothuis-Oudshoorn, Catharina G M; IJzerman, Maarten J; van Til, Janine A

    2016-01-01

    The objective of this study was to compare treatment profiles including both health outcomes and process characteristics in Parkinson disease using best-worst scaling (BWS), time trade-off (TTO), and visual analogue scales (VAS). From the model comprising of seven attributes with three levels, six unique profiles were selected representing process-related factors and health outcomes in Parkinson disease. A Web-based survey (N = 613) was conducted in a general population to estimate process-related utilities using profile-based BWS (case 2), multiprofile-based BWS (case 3), TTO, and VAS. The rank order of the six profiles was compared, convergent validity among methods was assessed, and individual analysis focused on the differentiation between pairs of profiles with methods used. The aggregated health-state utilities for the six treatment profiles were highly comparable for all methods and no rank reversals were identified. On the individual level, the convergent validity between all methods was strong; however, respondents differentiated less in the utility of closely related treatment profiles with a VAS or TTO than with BWS. For TTO and VAS, this resulted in nonsignificant differences in mean utilities for closely related treatment profiles. This study suggests that all methods are equally able to measure process-related utility when the aim is to estimate the overall value of treatments. On an individual level, such as in shared decision making, BWS allows for better prioritization of treatment alternatives, especially if they are closely related. The decision-making problem and the need for explicit trade-off between attributes should determine the choice for a method. Copyright © 2016. Published by Elsevier Inc.

  13. Incorporating stakeholder preferences in the selection of technologies for using invasive alien plants as a bio-energy feedstock: applying the analytical hierarchy process

    CSIR Research Space (South Africa)

    De Lange, Willem J

    2012-05-01

    Full Text Available (priorities, 132 values and objectives) in the context of the problem; the outputs can guide decision-makers to 133 identify a preferred course of action (Mamphweli and Meyer, 2009, Strager and Rosenberger, 134 2006, Hobbs et al., 1992, Belton and Stewart..., A. (1993) People?s self development: Perspectives on participatory action research., London, UK., 604 Zed Publications. 605 RENN, O. (2006) Participatory processes for designing environmental policies. Land Use Policy, 23, 34-43. 606 RENN, O...

  14. Biogeochemical processes of incorporation and transformation of 14C labelled fulvic acid, humic acid and simple organic molecules at the sediment-water interface (submarine canyon of the NW Mediterranean)

    International Nuclear Information System (INIS)

    Buscail, R.; Gadel, F.

    1987-01-01

    The input of organic compounds at the marine water-sediment interface was simulated by the injection of 14 C labelled raygrass fulvic and humic acids and glutamic acid in the overlying water of three identically preserved interfaces. After incubations of 6 days under in situ conditions (13 0 C, oxidizing conditions), separation of the resulting products are carried out by successive chemical extractions. They correspond to the relative importance of biological (respiration, assimilation) and geochemical (condensation in geopolymers and adsorption) processes. Two experiments have showed predominance of biological processes (with 14 C fulvic and glutamic acids), while in the case of 14 C humic acid, incorporation in sediment and geochemical processes are more important. (Auth.)

  15. Turning Schools Around: The National Board Certification Process as a School Improvement Strategy. Research Brief

    Science.gov (United States)

    Jaquith, Ann; Snyder, Jon

    2016-01-01

    Can the National Board certification process support school improvement where large proportions of students score below grade level on standardized tests? This SCOPE study examines a project that sought to seize and capitalize upon the learning opportunities embedded in the National Board certification process, particularly opportunities to learn…

  16. Turning Schools Around: The National Board Certification Process as a School Improvement Strategy

    Science.gov (United States)

    Jaquith, Ann; Snyder, Jon

    2016-01-01

    Can the National Board certification process support school improvement where large proportions of students score below grade level on standardized tests? This SCOPE study examines a project that sought to seize and capitalize upon the learning opportunities embedded in the National Board certification process, particularly opportunities to learn…

  17. Decision Making Strategy and the Simultaneous Processing of Syntactic Dependencies in Language and Music

    NARCIS (Netherlands)

    Roncaglia-Denissen, M.P.; Bouwer, F.L.; Honing, H.

    2018-01-01

    Despite differences in their function and domain-specific elements, syntactic processing in music and language is believed to share cognitive resources. This study aims to investigate whether the simultaneous processing of language and music share the use of a common syntactic processor or more

  18. Challenges and Recent Developments in Hearing Aids: Part II. Feedback and Occlusion Effect Reduction Strategies, Laser Shell Manufacturing Processes, and Other Signal Processing Technologies

    Science.gov (United States)

    Chung, King

    2004-01-01

    This is the second part of a review on the challenges and recent developments in hearing aids. Feedback and the occlusion effect pose great challenges in hearing aid design and usage. Yet, conventional solutions to feedback and the occlusion effect often create a dilemma: the solution to one often leads to the other. This review discusses the advanced signal processing strategies to reduce feedback and some new approaches to reduce the occlusion effect. Specifically, the causes of three types of feedback (acoustic, mechanical, and electromagnetic) are discussed. The strategies currently used to reduce acoustic feedback (i.e., adaptive feedback reduction algorithms using adaptive gain reduction, notch filtering, and phase cancellation strategies) and the design of new receivers that are built to reduce mechanical and electromagnetic feedback are explained. In addition, various new strategies (i.e., redesigned sound delivery devices and receiver-in-the-ear-canal hearing aid configuration) to reduce the occlusion effect are reviewed. Many manufacturers have recently adopted laser shell-manufacturing technologies to overcome problems associated with manufacturing custom hearing aid shells. The mechanisms of selected laser sintering and stereo lithographic apparatus and the properties of custom shells produced by these two processes are reviewed. Further, various new developments in hearing aid transducers, telecoils, channel-free amplification, open-platform programming options, rechargeable hearing aids, ear-level frequency modulated (FM) receivers, wireless Bluetooth FM systems, and wireless programming options are briefly explained and discussed. Finally, the applications of advanced hearing aid technologies to enhance other devices such as cochlear implants, hearing protectors, and cellular phones are discussed. PMID:15735871

  19. Components of identity and the family firm : An exploratory study of influences on the micro-process of strategy and firm level outcomes

    OpenAIRE

    Raffelsberger, Hannah; Hällbom, Maria

    2009-01-01

    Problem: There is a significant lack of research within the family business area which focuses on the micro-processes of strategy. Johnson, Melin and Whittington (2003) stated that while the field of strategy has traditionally concentrated on the macro-level of organizations, it needs now to attend to much more micro-level phenomenon. Furthermore, there is a general lack of research within the family business area in regards to strategy processes due to "the family business definition dilemma...

  20. The relation between information processing strategies and the development of the body of knowledge of students in competence-based pre-vocational secondary education

    NARCIS (Netherlands)

    Koopman, M.; Teune, P.J.; Jochems, W.M.G.

    2007-01-01

    The preference of students in competence-based Pre-Vocational Secondary Education (PVSE) for information processing strategies and the development of their body of knowledge were measured in a study that was carried out with 31 participants. The students’ information processing strategies were