WorldWideScience

Sample records for printable format pdf

  1. Printable elastic conductors by in situ formation of silver nanoparticles from silver flakes

    Science.gov (United States)

    Matsuhisa, Naoji; Inoue, Daishi; Zalar, Peter; Jin, Hanbit; Matsuba, Yorishige; Itoh, Akira; Yokota, Tomoyuki; Hashizume, Daisuke; Someya, Takao

    2017-08-01

    Printable elastic conductors promise large-area stretchable sensor/actuator networks for healthcare, wearables and robotics. Elastomers with metal nanoparticles are one of the best approaches to achieve high performance, but large-area utilization is limited by difficulties in their processability. Here we report a printable elastic conductor containing Ag nanoparticles that are formed in situ, solely by mixing micrometre-sized Ag flakes, fluorine rubbers, and surfactant. Our printable elastic composites exhibit conductivity higher than 4,000 S cm-1 (highest value: 6,168 S cm-1) at 0% strain, and 935 S cm-1 when stretched up to 400%. Ag nanoparticle formation is influenced by the surfactant, heating processes, and elastomer molecular weight, resulting in a drastic improvement of conductivity. Fully printed sensor networks for stretchable robots are demonstrated, sensing pressure and temperature accurately, even when stretched over 250%.

  2. Printable elastic conductors by in situ formation of silver nanoparticles from silver flakes

    NARCIS (Netherlands)

    Matsuhisa, N.; Inoue, D.; Zalar, P.; Jin, H.; Matsuba, Y.; Itoh, A.; Yokota, T.; Hashizume, D.; Someya, T.

    2017-01-01

    Printable elastic conductors promise large-area stretchable sensor/actuator networks for healthcare, wearables and robotics. Elastomers with metal nanoparticles are one of the best approaches to achieve high performance, but large-area utilization is limited by difficulties in their processability.

  3. PDF Lecture Materials for Online and ``Flipped'' Format Astronomy Courses

    Science.gov (United States)

    Kary, D. M.; Eisberg, J.

    2013-04-01

    Online astronomy courses typically rely on students reading the textbook and/or a set of text-based lecture notes to replace the “lecture” material. However, many of our students report that this is much less engaging than in-person lectures, especially given the amount of interactive work such as “think-pair-share” problems done in many astronomy classes. Students have similarly criticized direct lecture-capture. To address this, we have developed a set of PowerPoint-style presentations with embedded lecture audio combined with prompts for student interaction including think-pair-share questions. These are formatted PDF packages that can be used on a range of different computers using free software. The presentations are first developed using Microsoft PowerPoint software. Audio recordings of scripted lectures are then synchronized with the presentations and the entire package is converted to PDF using Adobe Presenter. This approach combines the ease of editing that PowerPoint provides along with the platform-independence of PDF. It's easy to add, remove, or edit individual slides as needed, and PowerPoint supports internal links so that think-pair-share questions can be inserted with links to feedback based on the answers selected. Modern PDF files support animated visuals with synchronized audio and they can be read using widely available free software. Using these files students in an online course can get many of the benefits of seeing and hearing the course material presented in an in-person lecture format. Students needing extra help in traditional lecture classes can use these presentations to help review the materials covered in lecture. Finally, the presentations can be used in a “flipped” format in which students work through the presentations outside of class time while spending the “lecture” time on in-class interaction.

  4. PDF Explained

    CERN Document Server

    Whitington, John

    2011-01-01

    An introduction to the PDF file format, threaded through with practical examples - deconstructing, creating and processing PDF files. After exploring how PDF is produced, and how it can be edited with tools from text editors to Ghostscript to PDFTK, readers will learn to deal with problems with PDF files and common error messages.

  5. Tailoring nanostructure and bioactivity of 3D printable hydrogels with self-assemble Peptides Amphiphile (PA) for promoting bile duct formation.

    Science.gov (United States)

    Yan, Ming; Lewis, Phillip L; Shah, Ramille N

    2018-05-31

    3D-printing has expanded our ability to produce reproducible and more complex scaffold architectures for tissue engineering applications. In order to enhance the biological response within these 3D printed scaffolds incorporating nanostructural features and/or specific biological signaling may be an effective means to optimize tissue regeneration. Peptides Amphiphiles (PAs) are a versatile supramolecular biomaterial with tailorable nanostructural and biochemical features. PAs are widely used in tissue engineering applications such as angiogenesis, neurogenesis, and bone regeneration. Thus, the addition of PAs is a potential solution that can greatly expand the utility of 3D bio-printing hydrogels in the field of regenerative medicine. In this paper, we firstly developed a 3D printable thiolated-gelatin bioink supplemented with PAs to tailor the bioactivity and nanostructure which allows for the incorporation of cells. The bioink can be printed at 4 °C and stabilized to last a long time (>1 month) in culture at 37 °C by via a dual secondary cross-linking strategy using calcium ions and homobifunctional maleiminde-poly (ethylene glycol). Rheological properties of inks were characterized and were suitable for printing multi-layered structures. We additionally demonstrated enhanced functionality of ink formulations by utilizing a laminin-mimetic IKVAV-based PA system within a 3D-printable ink containing cholangiocytes. Viability and functional staining showed that the IKVAV PA nanofibers stimulated cholangioctyes to form functional tubular structures, which was not observed in other ink formulations. . © 2018 IOP Publishing Ltd.

  6. MSL: Facilitating automatic and physical analysis of published scientific literature in PDF format.

    Science.gov (United States)

    Ahmed, Zeeshan; Dandekar, Thomas

    2015-01-01

    Published scientific literature contains millions of figures, including information about the results obtained from different scientific experiments e.g. PCR-ELISA data, microarray analysis, gel electrophoresis, mass spectrometry data, DNA/RNA sequencing, diagnostic imaging (CT/MRI and ultrasound scans), and medicinal imaging like electroencephalography (EEG), magnetoencephalography (MEG), echocardiography  (ECG), positron-emission tomography (PET) images. The importance of biomedical figures has been widely recognized in scientific and medicine communities, as they play a vital role in providing major original data, experimental and computational results in concise form. One major challenge for implementing a system for scientific literature analysis is extracting and analyzing text and figures from published PDF files by physical and logical document analysis. Here we present a product line architecture based bioinformatics tool 'Mining Scientific Literature (MSL)', which supports the extraction of text and images by interpreting all kinds of published PDF files using advanced data mining and image processing techniques. It provides modules for the marginalization of extracted text based on different coordinates and keywords, visualization of extracted figures and extraction of embedded text from all kinds of biological and biomedical figures using applied Optimal Character Recognition (OCR). Moreover, for further analysis and usage, it generates the system's output in different formats including text, PDF, XML and images files. Hence, MSL is an easy to install and use analysis tool to interpret published scientific literature in PDF format.

  7. Environmental Sensitivity Index (ESI) Atlas: West Peninsular Florida Volume 2, maps in portable document format (pdf) (NODC Accession 0006394)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set comprises the Environmental Sensitivity Index (ESI) maps in Portable Document Format (.PDF) for the shoreline of lower West Peninsular Florida (to...

  8. An LES-PBE-PDF approach for modeling particle formation in turbulent reacting flows

    Science.gov (United States)

    Sewerin, Fabian; Rigopoulos, Stelios

    2017-10-01

    Many chemical and environmental processes involve the formation of a polydispersed particulate phase in a turbulent carrier flow. Frequently, the immersed particles are characterized by an intrinsic property such as the particle size, and the distribution of this property across a sample population is taken as an indicator for the quality of the particulate product or its environmental impact. In the present article, we propose a comprehensive model and an efficient numerical solution scheme for predicting the evolution of the property distribution associated with a polydispersed particulate phase forming in a turbulent reacting flow. Here, the particulate phase is described in terms of the particle number density whose evolution in both physical and particle property space is governed by the population balance equation (PBE). Based on the concept of large eddy simulation (LES), we augment the existing LES-transported probability density function (PDF) approach for fluid phase scalars by the particle number density and obtain a modeled evolution equation for the filtered PDF associated with the instantaneous fluid composition and particle property distribution. This LES-PBE-PDF approach allows us to predict the LES-filtered fluid composition and particle property distribution at each spatial location and point in time without any restriction on the chemical or particle formation kinetics. In view of a numerical solution, we apply the method of Eulerian stochastic fields, invoking an explicit adaptive grid technique in order to discretize the stochastic field equation for the number density in particle property space. In this way, sharp moving features of the particle property distribution can be accurately resolved at a significantly reduced computational cost. As a test case, we consider the condensation of an aerosol in a developed turbulent mixing layer. Our investigation not only demonstrates the predictive capabilities of the LES-PBE-PDF model but also

  9. Programmatic conversion of crystal structures into 3D printable files using Jmol

    OpenAIRE

    Scalfani, Vincent F.; Williams, Antony J.; Tkachenko, Valery; Karapetyan, Karen; Pshenichnov, Alexey; Hanson, Robert M.; Liddie, Jahred M.; Bara, Jason E.

    2016-01-01

    Background Three-dimensional (3D) printed crystal structures are useful for chemistry teaching and research. Current manual methods of converting crystal structures into 3D printable files are time-consuming and tedious. To overcome this limitation, we developed a programmatic method that allows for facile conversion of thousands of crystal structures directly into 3D printable files. Results A collection of over 30,000 crystal structures in crystallographic information file (CIF) format from...

  10. Custom 3D Printable Silicones with Tunable Stiffness.

    Science.gov (United States)

    Durban, Matthew M; Lenhardt, Jeremy M; Wu, Amanda S; Small, Ward; Bryson, Taylor M; Perez-Perez, Lemuel; Nguyen, Du T; Gammon, Stuart; Smay, James E; Duoss, Eric B; Lewicki, James P; Wilson, Thomas S

    2018-02-01

    Silicone elastomers have broad versatility within a variety of potential advanced materials applications, such as soft robotics, biomedical devices, and metamaterials. A series of custom 3D printable silicone inks with tunable stiffness is developed, formulated, and characterized. The silicone inks exhibit excellent rheological behavior for 3D printing, as observed from the printing of porous structures with controlled architectures. Herein, the capability to tune the stiffness of printable silicone materials via careful control over the chemistry, network formation, and crosslink density of the ink formulations in order to overcome the challenging interplay between ink development, post-processing, material properties, and performance is demonstrated. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  11. EBooks as PDF Files, in EPub Format or as Interactive IBooks? Digital Books in Physics Lessons of Secondary Education

    Science.gov (United States)

    Lohr, Manfred

    2014-01-01

    This paper outlines the different capabilities of ebooks in the pdf, epub and ibook format in science teaching evaluated at the BG/BRG Schwechat. Over the recent years the school equipped with 100 personal computers and 28 iPads has become one of the leading e-learning schools in Austria. iPads show their advantages in the context of blended…

  12. 3D-Printable Antimicrobial Composite Resins

    NARCIS (Netherlands)

    Yue, Jun; Zhao, Pei; Gerasimov, Jennifer Y.; van de Lagemaat, Marieke; Grotenhuis, Arjen; Rustema-Abbing, Minie; van der Mei, Henny C.; Busscher, Henk J.; Herrmann, Andreas; Ren, Yijin

    2015-01-01

    3D printing is seen as a game-changing manufacturing process in many domains, including general medicine and dentistry, but the integration of more complex functions into 3D-printed materials remains lacking. Here, it is expanded on the repertoire of 3D-printable materials to include antimicrobial

  13. Fulltext PDF

    Indian Academy of Sciences (India)

    ways to track turtles both through space and time. The comparison of ... as a single nesting population was reduced to a few hundred individuals in the 1970s. However .... turtles spent some part of the year in those coastal waters. However ..... The newsletters are available online in PDF format and a limited number of.

  14. Edge printability: techniques used to evaluate and improve extreme wafer edge printability

    Science.gov (United States)

    Roberts, Bill; Demmert, Cort; Jekauc, Igor; Tiffany, Jason P.

    2004-05-01

    The economics of semiconductor manufacturing have forced process engineers to develop techniques to increase wafer yield. Improvements in process controls and uniformities in all areas of the fab have reduced film thickness variations at the very edge of the wafer surface. This improved uniformity has provided the opportunity to consider decreasing edge exclusions, and now the outermost extents of the wafer must be considered in the yield model and expectations. These changes have increased the requirements on lithography to improve wafer edge printability in areas that previously were not even coated. This has taxed all software and hardware components used in defining the optical focal plane at the wafer edge. We have explored techniques to determine the capabilities of extreme wafer edge printability and the components of the systems that influence this printability. We will present current capabilities and new detection techniques and the influence that the individual hardware and software components have on edge printability. We will show effects of focus sensor designs, wafer layout, utilization of dummy edge fields, the use of non-zero overlay targets and chemical/optical edge bead optimization.

  15. Printable Thin Film Supercapacitors Using Single-Walled Carbon Nanotubes

    KAUST Repository

    Kaempgen, Martti

    2009-05-13

    Thin film supercapacitors were fabricated using printable materials to make flexible devices on plastic. The active electrodes were made from sprayed networks of single-walled carbon nanotubes (SWCNTs) serving as both electrodes and charge collectors. Using a printable aqueous gel electrolyte as well as an organic liquid electrolyte, the performances of the devices show very high energy and power densities (6 W h/kg for both electrolytes and 23 and 70 kW/kg for aqueous gel electrolyte and organic electrolyte, respectively) which is comparable to performance in other SWCNT-based supercapacitor devices fabricated using different methods. The results underline the potential of printable thin film supercapacitors. The simplified architecture and the sole use of printable materials may lead to a new class of entirely printable charge storage devices allowing for full integration with the emerging field of printed electronics. © 2009 American Chemical Society.

  16. Printability of Synthetic Papers by Electrophotography

    Directory of Open Access Journals (Sweden)

    Rozália Szentgyörgyvölgyi

    2010-04-01

    Full Text Available This paper deals with the printability of synthetic papers by the electrophotography technique. Prints of cmyk colour fields from 20% to 100% raster tone values were printed on three types of synthetic papers (one film synthetic paper and two fiber synthetic papers. The investigation of the appearance included densitometric measurement of the cmyk prints. The results have shown differences in the optical density and optical tone value between cmyk prints made on various synthetic papers. The highest optical density and the increase of the optical tone value were observed on the film synthetic paper, where cmyk prints were more saturated. The highest abrasion resistance of cmyk prints was obtained from the fibre synthetic paper.

  17. Are PDF Documents Accessible?

    Directory of Open Access Journals (Sweden)

    Mireia Ribera Turró

    2008-09-01

    Full Text Available Adobe PDF is one of the most widely used formats in scientific communications and in administrative documents. In its latest versions it has incorporated structural tags and improvements that increase its level of accessibility. This article reviews the concept of accessibility in the reading of digital documents and evaluates the accessibility of PDF according to the most widely established standards.

  18. Assessment of printability for printed electronics patterns by measuring geometric dimensions and defining assessment parameters

    International Nuclear Information System (INIS)

    Jeon, Sung Woong; Kim, Cheol; Kim, Chung Hwan

    2016-01-01

    The printability of patterns for printed electronic devices determines the performance, yield rate, and reliability of the devices; therefore, it should be assessed quantitatively. In this paper, parameters for printability assessment of printed patterns for width, pinholes, and edge waviness are suggested. For quantitative printability assessment, printability grades for each parameter are proposed according to the parameter values. As examples of printability assessment, printed line patterns and mesh patterns obtained using roll-to-roll gravure printing are used. Both single-line patterns and mesh patterns show different levels of printability, even in samples obtained using the same printing equipment and conditions. Therefore, for reliable assessment, it is necessary to assess the printability of the patterns by enlarging the sampling area and increasing the number of samples. We can predict the performance of printed electronic devices by assessing the printability of the patterns that constitute them

  19. Assessment of printability for printed electronics patterns by measuring geometric dimensions and defining assessment parameters

    Energy Technology Data Exchange (ETDEWEB)

    Jeon, Sung Woong [Dept. of Robotics Engineering, Daegu Gyeongbuk Institute of Science and Technology (DGIST), Daegu (Korea, Republic of); Kim, Cheol; Kim, Chung Hwan [Chungnam National University, Daejeon (Korea, Republic of)

    2016-12-15

    The printability of patterns for printed electronic devices determines the performance, yield rate, and reliability of the devices; therefore, it should be assessed quantitatively. In this paper, parameters for printability assessment of printed patterns for width, pinholes, and edge waviness are suggested. For quantitative printability assessment, printability grades for each parameter are proposed according to the parameter values. As examples of printability assessment, printed line patterns and mesh patterns obtained using roll-to-roll gravure printing are used. Both single-line patterns and mesh patterns show different levels of printability, even in samples obtained using the same printing equipment and conditions. Therefore, for reliable assessment, it is necessary to assess the printability of the patterns by enlarging the sampling area and increasing the number of samples. We can predict the performance of printed electronic devices by assessing the printability of the patterns that constitute them.

  20. Atmospheric pressure DBD gun and its application in ink printability

    International Nuclear Information System (INIS)

    Chen Qiang; Zhang Yuefei; Han Erli; Ge Yuanjing

    2005-01-01

    In this paper, a plasma source discharging at atmospheric pressure and its characterization diagnosed by a Langmuir probe and a digital camera are presented. As an application the dielectric barrier discharge (DBD) gun modifying an ultraviolet cured resin surface for ink printability is reported. The results from the digital camera indicate the uniformity and homogeneity of the plasma generated from the gun in the downstream but depending on the input power, diameter of electrodes, gas flow rates and the distance between the substrates and the nozzle. The contact angle measurement proves the efficiency of gun during the surface modification. The ink printability following DBD gun processing described here was significantly improved. The performed surface analysis using Fourier transform infrared indicates that the polarity of surface grafted in plasma is responsible for the film printability

  1. Adobe Acrobat X PDF Bible

    CERN Document Server

    Padova, Ted

    2011-01-01

    The classic Acrobat and PDF reference, updated to cover the latest release. Consistently the most authoritative and comprehensive resource on Acrobat and PDF format, this standard reference returns with in-depth coverage of the newest version of Acrobat. Written by bestselling author Ted Padova, this book is packed with real-world insights and techniques gained from Padova's daily use of Acrobat and PDF under deadline constraints. You'll discover everything there is to know about using Acrobat and PDF for print prepress, the Internet, CD-ROMs, and other forms of media.: Popular author Ted Pado

  2. Graphene-Decorated Nanocomposites for Printable Electrodes in Thin Wafer Devices

    Science.gov (United States)

    Bakhshizadeh, N.; Sivoththaman, S.

    2017-12-01

    Printable electrodes that induce less stress and require lower curing temperatures compared to traditional screen-printed metal pastes are needed in thin wafer devices such as future solar cells, and in flexible electronics. The synthesis of nanocomposites by incorporating graphene nanopowders as well as silver nanowires into epoxy-based electrically conductive adhesives (ECA) is examined to improve electrical conductivity and to develop alternate printable electrode materials that induce less stress on the wafer. For the synthesized graphene and Ag nanowire-decorated ECA nanocomposites, the curing kinetics were studied by dynamic and isothermal differential scanning calorimetry measurements. Thermogravimetric analysis on ECA, ECA-AG and ECA/graphene nanopowder nanocomposites showed that the temperatures for onset of decomposition are higher than their corresponding glass transition temperature ( T g) indicating an excellent thermal resistance. Printed ECA/Ag nanowire nanocomposites showed 90% higher electrical conductivity than ECA films, whereas the ECA/graphene nanocomposites increased the conductivity by over two orders of magnitude. Scanning electron microscopy results also revealed the effect of fillers morphology on the conductivity improvement and current transfer mechanisms in nanocomposites. Residual stress analysis performed on Si wafers showed that the ECA and nanocomposite printed wafers are subjected to much lower stress compared to those printed with metallic pastes. The observed parameters of low curing temperature, good thermal resistance, reasonably high conductivity, and low residual stress in the ECA/graphene nanocomposite makes this material a promising alternative in screen-printed electrode formation in thin substrates.

  3. Characterization of printable cellular micro-fluidic channels for tissue engineering

    International Nuclear Information System (INIS)

    Zhang, Yahui; Chen, Howard; Ozbolat, Ibrahim T; Yu, Yin

    2013-01-01

    Tissue engineering has been a promising field of research, offering hope of bridging the gap between organ shortage and transplantation needs. However, building three-dimensional (3D) vascularized organs remains the main technological barrier to be overcome. One of the major challenges is the inclusion of a vascular network to support cell viability in terms of nutrients and oxygen perfusion. This paper introduces a new approach to the fabrication of vessel-like microfluidic channels that has the potential to be used in thick tissue or organ fabrication in the future. In this research, we investigate the manufacturability of printable micro-fluidic channels, where micro-fluidic channels support mechanical integrity as well as enable fluid transport in 3D. A pressure-assisted solid freeform fabrication platform is developed with a coaxial needle dispenser unit to print hollow hydrogel filaments. The dispensing rheology is studied, and effects of material properties on structural formation of hollow filaments are analyzed. Sample structures are printed through the developed computer-controlled system. In addition, cell viability and gene expression studies are presented in this paper. Cell viability shows that cartilage progenitor cells (CPCs) maintained their viability right after bioprinting and during prolonged in vitro culture. Real-time PCR analysis yielded a relatively higher expression of cartilage-specific genes in alginate hollow filament encapsulating CPCs, compared with monolayer cultured CPCs, which revealed that printable semi-permeable micro-fluidic channels provided an ideal environment for cell growth and function. (paper)

  4. Printable semiconductor structures and related methods of making and assembling

    Science.gov (United States)

    Nuzzo, Ralph G.; Rogers, John A.; Menard, Etienne; Lee, Keon Jae; Khang; , Dahl-Young; Sun, Yugang; Meitl, Matthew; Zhu, Zhengtao; Ko, Heung Cho; Mack, Shawn

    2013-03-12

    The present invention provides a high yield pathway for the fabrication, transfer and assembly of high quality printable semiconductor elements having selected physical dimensions, shapes, compositions and spatial orientations. The compositions and methods of the present invention provide high precision registered transfer and integration of arrays of microsized and/or nanosized semiconductor structures onto substrates, including large area substrates and/or flexible substrates. In addition, the present invention provides methods of making printable semiconductor elements from low cost bulk materials, such as bulk silicon wafers, and smart-materials processing strategies that enable a versatile and commercially attractive printing-based fabrication platform for making a broad range of functional semiconductor devices.

  5. Fulltext PDF

    Indian Academy of Sciences (India)

    Admin

    B ackground. T he sub-title of this article is borrow ed from tw o dis- ..... theory w hich so starkly opposed the B iblicalversion of creation. A second .... R eca p itu la - tion and C onclusion, sum m arises the thesis { w hich, in ...... Education, 2002; http://www.muslimheritage.com/uploads/ibnsina.pdf) for an early example of ...

  6. Fulltext PDF

    Indian Academy of Sciences (India)

    Scholars and Post-Doctoral Fellows (PDF), who work in topology and related areas also to apply. The course consists lectures on the following topics: (a) topology of metric spaces, (b) basic proper- ties of topological spaces, (c) separation axioms and metrization theorems, (d) fundamental groups,. (e) covering spaces and ...

  7. Fulltext PDF

    Indian Academy of Sciences (India)

    the list of essential medicines of the World Health Organization1. Thiamine ... he was just 27!), he published a full paper in the Journal of the American Chemical Society, which for the first time elaborated how ... EML2015_8-May-15.pdf.

  8. Development of a New Stretchable and Screen Printable Conductive Ink

    Science.gov (United States)

    Mohammed, Anwar A.

    Stretchable conductive ink is a key enabler for stretchable electronics. This thesis research focuses on the development of a new stretchable and screen printable conductive ink. After print and cure, this ink would be capable of being stretched by at least 500 cycles at 20% strain without increasing its resistance by more than 30 times the original resistance, while maintaining electrical and mechanical integrity. For a stretchable and screen-printable conductive ink, the correct morphology of the metal powder selected and the ability of the binder to be stretched after the sintering process, are both indispensable. This research has shown that a bi-modal mixture of fine and large-diameter silver flakes will improve stretchability. While the smaller flakes increase the conductivity and lower the sintering temperature, the larger flake particles promote ohmic connectivity during stretching. The bi-modal flake distribution increases connection points while enhancing packing density and lowering the thermal activation barrier. The polymer binder phase plays a crucial role in offering stretchability to the stretchable conductive inks. The silver flakes by themselves are not stretchable but they are contained within a stretchable binder system. The research demonstrates that commonly used printable ink binder when combined with large-chain polymers through a process known as 'elastomeric chain polymerization' will enable the conductive ink to become more stretchable. This research has shown that the new stretchable and screen printable silver conductive ink developed based upon the two insights mentioned above; (1) bi modal flakes to improve ohmic connectivity during stretching and (2) elastomeric chain polymerized binder system which could stretch even after the ink is sintered to the substrate, can exhibit an ink stretchability of at least 500 cycles at 20% strain while increasing the resistance by less than 30 times the original resistance. Wavy print patterns can

  9. Printable, flexible and stretchable diamond for thermal management

    Science.gov (United States)

    Rogers, John A; Kim, Tae Ho; Choi, Won Mook; Kim, Dae Hyeong; Meitl, Matthew; Menard, Etienne; Carlisle, John

    2013-06-25

    Various heat-sinked components and methods of making heat-sinked components are disclosed where diamond in thermal contact with one or more heat-generating components are capable of dissipating heat, thereby providing thermally-regulated components. Thermally conductive diamond is provided in patterns capable of providing efficient and maximum heat transfer away from components that may be susceptible to damage by elevated temperatures. The devices and methods are used to cool flexible electronics, integrated circuits and other complex electronics that tend to generate significant heat. Also provided are methods of making printable diamond patterns that can be used in a range of devices and device components.

  10. Fabrication of PLA Filaments and its Printable Performance

    Science.gov (United States)

    Liu, Wenjie; Zhou, Jianping; Ma, Yuming; Wang, Jie; Xu, Jie

    2017-12-01

    Fused deposition modeling (FDM) is a typical 3D printing technology and preparation of qualified filaments is the basis. In order to prepare polylactic acid (PLA) filaments suitable for personalized FDM 3D printing, this article investigated the effect of factors such as extrusion temperature and screw speed on the diameter, surface roughness and ultimate tensile stress of the obtained PLA filaments. The optimal process parameters for fabrication of qualified filaments were determined. Further, the printable performance of the obtained PLA filaments for 3D objects was preliminarily explored.

  11. 3D Printability of Alginate-Carboxymethyl Cellulose Hydrogel

    Science.gov (United States)

    Habib, Ahasan; Sathish, Venkatachalem; Mallik, Sanku; Khoda, Bashir

    2018-01-01

    Three-dimensional (3D) bio-printing is a revolutionary technology to reproduce a 3D functional living tissue scaffold in-vitro through controlled layer-by-layer deposition of biomaterials along with high precision positioning of cells. Due to its bio-compatibility, natural hydrogels are commonly considered as the scaffold material. However, the mechanical integrity of a hydrogel material, especially in 3D scaffold architecture, is an issue. In this research, a novel hybrid hydrogel, that is, sodium alginate with carboxymethyl cellulose (CMC) is developed and systematic quantitative characterization tests are conducted to validate its printability, shape fidelity and cell viability. The outcome of the rheological and mechanical test, filament collapse and fusion test demonstrate the favorable shape fidelity. Three-dimensional scaffold structures are fabricated with the pancreatic cancer cell, BxPC3 and the 86% cell viability is recorded after 23 days. This hybrid hydrogel can be a potential biomaterial in 3D bioprinting process and the outlined characterization techniques open an avenue directing reproducible printability and shape fidelity. PMID:29558424

  12. 3D Printability of Alginate-Carboxymethyl Cellulose Hydrogel

    Directory of Open Access Journals (Sweden)

    Ahasan Habib

    2018-03-01

    Full Text Available Three-dimensional (3D bio-printing is a revolutionary technology to reproduce a 3D functional living tissue scaffold in-vitro through controlled layer-by-layer deposition of biomaterials along with high precision positioning of cells. Due to its bio-compatibility, natural hydrogels are commonly considered as the scaffold material. However, the mechanical integrity of a hydrogel material, especially in 3D scaffold architecture, is an issue. In this research, a novel hybrid hydrogel, that is, sodium alginate with carboxymethyl cellulose (CMC is developed and systematic quantitative characterization tests are conducted to validate its printability, shape fidelity and cell viability. The outcome of the rheological and mechanical test, filament collapse and fusion test demonstrate the favorable shape fidelity. Three-dimensional scaffold structures are fabricated with the pancreatic cancer cell, BxPC3 and the 86% cell viability is recorded after 23 days. This hybrid hydrogel can be a potential biomaterial in 3D bioprinting process and the outlined characterization techniques open an avenue directing reproducible printability and shape fidelity.

  13. Research on the printability of hydrogels in 3D bioprinting

    Science.gov (United States)

    He, Yong; Yang, Feifei; Zhao, Haiming; Gao, Qing; Xia, Bing; Fu, Jianzhong

    2016-07-01

    As the biocompatible materials, hydrogels have been widely used in three- dimensional (3D) bioprinting/organ printing to load cell for tissue engineering. It is important to precisely control hydrogels deposition during printing the mimic organ structures. However, the printability of hydrogels about printing parameters is seldom addressed. In this paper, we systemically investigated the printability of hydrogels from printing lines (one dimensional, 1D structures) to printing lattices/films (two dimensional, 2D structures) and printing 3D structures with a special attention to the accurate printing. After a series of experiments, we discovered the relationships between the important factors such as air pressure, feedrate, or even printing distance and the printing quality of the expected structures. Dumbbell shape was observed in the lattice structures printing due to the hydrogel diffuses at the intersection. Collapses and fusion of adjacent layer would result in the error accumulation at Z direction which was an important fact that could cause printing failure. Finally, we successfully demonstrated a 3D printing hydrogel scaffold through harmonize with all the parameters. The cell viability after printing was compared with the casting and the results showed that our bioprinting method almost had no extra damage to the cells.

  14. 3D Printability of Alginate-Carboxymethyl Cellulose Hydrogel.

    Science.gov (United States)

    Habib, Ahasan; Sathish, Venkatachalem; Mallik, Sanku; Khoda, Bashir

    2018-03-20

    Three-dimensional (3D) bio-printing is a revolutionary technology to reproduce a 3D functional living tissue scaffold in-vitro through controlled layer-by-layer deposition of biomaterials along with high precision positioning of cells. Due to its bio-compatibility, natural hydrogels are commonly considered as the scaffold material. However, the mechanical integrity of a hydrogel material, especially in 3D scaffold architecture, is an issue. In this research, a novel hybrid hydrogel, that is, sodium alginate with carboxymethyl cellulose (CMC) is developed and systematic quantitative characterization tests are conducted to validate its printability, shape fidelity and cell viability. The outcome of the rheological and mechanical test, filament collapse and fusion test demonstrate the favorable shape fidelity. Three-dimensional scaffold structures are fabricated with the pancreatic cancer cell, BxPC3 and the 86% cell viability is recorded after 23 days. This hybrid hydrogel can be a potential biomaterial in 3D bioprinting process and the outlined characterization techniques open an avenue directing reproducible printability and shape fidelity.

  15. Assist feature printability prediction by 3-D resist profile reconstruction

    Science.gov (United States)

    Zheng, Xin; Huang, Jensheng; Chin, Fook; Kazarian, Aram; Kuo, Chun-Chieh

    2012-06-01

    Sub-resolution Assist Features (SRAFs) are powerful tools to enhance the focus margin of drawn patterns. SRAFs are placed and sized so they do not print on the wafer, but the larger the SRAF, the more effective it becomes at enhancing through-focus stability. The size and location of an SRAF that will image on a wafer is highly dependent upon neighboring patterns and models of SRAF printability are, at present, unreliable. Model-based SRAF placement has been used to enhance resolution at 20nm node processes and below with stringent requirements that inserted SRAFs will not be imaged on wafer. However, despite widespread SRAF use and hard data as to SRAF effectiveness, it has been very difficult to develop a process model that accurately predicts under what process conditions an SRAF will image on a wafer. More accurate models of SRAF printing should allow model based SRAF placement to be relaxed, resulting in more effective SRAF placement and broader focus margins. One of the first problems with the concept of SRAF printability is the definition of an SRAF printing on a wafer. This is not obvious because two different states of printing exist. The first print state is when a residue is left on a wafer from the SRAF. The first state can be considered printing from the point of view that photoresist is on the wafer and the photoresist may even lift off and cause defects. However, the first state can be considered non-printing because the over etch from the etch process will generally remove the photoresist residual and the material underneath. The second state is when a pattern is formed and etched into the substrate, a state at which the pattern has clearly printed on the wafer. Of course, intermediate states may also be defined. In order to be applicable, an SRAF printability model must be able to predict both printing states. In addition, the model must be able to extrapolate to configurations beyond those used to develop the model in the first place. These model

  16. Classification and printability of EUV mask defects from SEM images

    Science.gov (United States)

    Cho, Wonil; Price, Daniel; Morgan, Paul A.; Rost, Daniel; Satake, Masaki; Tolani, Vikram L.

    2017-10-01

    Classification and Printability of EUV Mask Defects from SEM images EUV lithography is starting to show more promise for patterning some critical layers at 5nm technology node and beyond. However, there still are many key technical obstacles to overcome before bringing EUV Lithography into high volume manufacturing (HVM). One of the greatest obstacles is manufacturing defect-free masks. For pattern defect inspections in the mask-shop, cutting-edge 193nm optical inspection tools have been used so far due to lacking any e-beam mask inspection (EBMI) or EUV actinic pattern inspection (API) tools. The main issue with current 193nm inspection tools is the limited resolution for mask dimensions targeted for EUV patterning. The theoretical resolution limit for 193nm mask inspection tools is about 60nm HP on masks, which means that main feature sizes on EUV masks will be well beyond the practical resolution of 193nm inspection tools. Nevertheless, 193nm inspection tools with various illumination conditions that maximize defect sensitivity and/or main-pattern modulation are being explored for initial EUV defect detection. Due to the generally low signal-to-noise in the 193nm inspection imaging at EUV patterning dimensions, these inspections often result in hundreds and thousands of defects which then need to be accurately reviewed and dispositioned. Manually reviewing each defect is difficult due to poor resolution. In addition, the lack of a reliable aerial dispositioning system makes it very challenging to disposition for printability. In this paper, we present the use of SEM images of EUV masks for higher resolution review and disposition of defects. In this approach, most of the defects detected by the 193nm inspection tools are first imaged on a mask SEM tool. These images together with the corresponding post-OPC design clips are provided to KLA-Tencor's Reticle Decision Center (RDC) platform which provides ADC (Automated Defect Classification) and S2A (SEM

  17. Fulltext PDF

    Indian Academy of Sciences (India)

    Sandeep M., Sun F., Liu F., Li J., David P. B. and Yue G. H. 2012 Novel polymorphic microsatellites from Florida red tilapia and cross- species amplification in Mozambique and Nile tilapia. J. Genet. 91, e97–e99. Online only: http://www.ias.ac.in/jgenet/OnlineResources/. 91/e97.pdf. Xin C., Yu D., Peng J., Hu H., Xing Y. and ...

  18. Printable Spacecraft: Flexible Electronic Platforms for NASA Missions. Phase One

    Science.gov (United States)

    Short, Kendra (Principal Investigator); Van Buren, David (Principal Investigator)

    2012-01-01

    Atmospheric confetti. Inchworm crawlers. Blankets of ground penetrating radar. These are some of the unique mission concepts which could be enabled by a printable spacecraft. Printed electronics technology offers enormous potential to transform the way NASA builds spacecraft. A printed spacecraft's low mass, volume and cost offer dramatic potential impacts to many missions. Network missions could increase from a few discrete measurements to tens of thousands of platforms improving areal density and system reliability. Printed platforms could be added to any prime mission as a low-cost, minimum resource secondary payload to augment the science return. For a small fraction of the mass and cost of a traditional lander, a Europa flagship mission might carry experimental printed surface platforms. An Enceladus Explorer could carry feather-light printed platforms to release into volcanic plumes to measure composition and impact energies. The ability to print circuits directly onto a variety of surfaces, opens the possibility of multi-functional structures and membranes such as "smart" solar sails and balloons. The inherent flexibility of a printed platform allows for in-situ re-configurability for aerodynamic control or mobility. Engineering telemetry of wheel/soil interactions are possible with a conformal printed sensor tape fit around a rover wheel. Environmental time history within a sample return canister could be recorded with a printed sensor array that fits flush to the interior of the canister. Phase One of the NIAC task entitled "Printable Spacecraft" investigated the viability of printed electronics technologies for creating multi-functional spacecraft platforms. Mission concepts and architectures that could be enhanced or enabled with this technology were explored. This final report captures the results and conclusions of the Phase One study. First, the report presents the approach taken in conducting the study and a mapping of results against the proposed

  19. 3D Printable Filaments Made of Biobased Polyethylene Biocomposites

    Directory of Open Access Journals (Sweden)

    Daniel Filgueira

    2018-03-01

    Full Text Available Two different series of biobased polyethylene (BioPE were used for the manufacturing of biocomposites, complemented with thermomechanical pulp (TMP fibers. The intrinsic hydrophilic character of the TMP fibers was previously modified by grafting hydrophobic compounds (octyl gallate and lauryl gallate by means of an enzymatic-assisted treatment. BioPE with low melt flow index (MFI yielded filaments with low void fraction and relatively low thickness variation. The water absorption of the biocomposites was remarkably improved when the enzymatically-hydrophobized TMP fibers were used. Importantly, the 3D printing of BioPE was improved by adding 10% and 20% TMP fibers to the composition. Thus, 3D printable biocomposites with low water uptake can be manufactured by using fully biobased materials and environmentally-friendly processes.

  20. 3D-Printable Bioactivated Nanocellulose-Alginate Hydrogels.

    Science.gov (United States)

    Leppiniemi, Jenni; Lahtinen, Panu; Paajanen, Antti; Mahlberg, Riitta; Metsä-Kortelainen, Sini; Pinomaa, Tatu; Pajari, Heikki; Vikholm-Lundin, Inger; Pursula, Pekka; Hytönen, Vesa P

    2017-07-05

    We describe herein a nanocellulose-alginate hydrogel suitable for 3D printing. The composition of the hydrogel was optimized based on material characterization methods and 3D printing experiments, and its behavior during the printing process was studied using computational fluid dynamics simulations. The hydrogel was biofunctionalized by the covalent coupling of an enhanced avidin protein to the cellulose nanofibrils. Ionic cross-linking of the hydrogel using calcium ions improved the performance of the material. The resulting hydrogel is suitable for 3D printing, its mechanical properties indicate good tissue compatibility, and the hydrogel absorbs water in moist conditions, suggesting potential in applications such as wound dressings. The biofunctionalization potential was shown by attaching a biotinylated fluorescent protein and a biotinylated fluorescent small molecule via avidin and monitoring the material using confocal microscopy. The 3D-printable bioactivated nanocellulose-alginate hydrogel offers a platform for the development of biomedical devices, wearable sensors, and drug-releasing materials.

  1. Materials Properties of Printable Edible Inks and Printing Parameters Optimization during 3D Printing: A review.

    Science.gov (United States)

    Feng, Chunyan; Zhang, Min; Bhandari, Bhesh

    2018-06-01

    Interest in additive manufacture has grown significantly in recent years, driving a need for printable materials that can sustain high strains and still fulfill their function in applications such as tissue engineering, regenerative medicine field, food engineering and field of aerospace, etc. As an emerging and promising technology, 3Dprinting has attracted more and more attention with fast manipulation, reduce production cost, customize geometry, increase competitiveness and advantages in many hot research areas. Many researchers have done a lot of investigations on printable materials, ranging from a single material to composite material. Main content: This review focuses on the contents of printable edible inks. It also gathers and analyzes information on the effects of printable edible ink material properties on 3D print accuracy. In addition, it discusses the impact of printing parameters on accurate printing, and puts forward current challenges and recommendations for future research and development.

  2. A stretchable and screen-printable conductive ink for stretchable electronics

    Science.gov (United States)

    Mohammed, Anwar; Pecht, Michael

    2016-10-01

    Stretchable electronics can offer an added degree of design freedom and generate products with unprecedented capabilities. Stretchable conductive ink serving as interconnect, is a key enabler for stretchable electronics. This paper focuses on the development of a stretchable and screen printable conductive ink which could be stretched more than 500 cycles at 20% strain while maintaining electrical and mechanical integrity. The screen printable and stretchable conductive ink developed in this paper marks an important milestone for this nascent technology.

  3. Printable organic and inorganic materials for flexible electrochemical devices

    Science.gov (United States)

    Wojcik, Pawel Jerzy

    The growing demand of consumer printed electronics such as smart cards, smart packaging, automotive displays, electronic paper and others led to the increased interest in fully printed electrochemical devices. These components are expected to be developed based on printed thin films derived from cheap and widely accessible compounds. This dissertation presents the long stretch of technical research that was performed to realize printed energy efficient concepts such as electrochromic displays and smart-windows. Within this broad theme, the presented study had a number of specific objectives, however, the overall aim was to develop low-cost material systems (i.e. printable mixtures) at a lab-scale, which would be compatible with large-scale roll-to-roll processing. Presented results concern three main topics: (i) dual-phase inorganic electrochromic material processed at low temperature, (ii) enhancement in electrochromic performance via metaloxide nanoparticles engineering, and (iii) highly conductive and mechanically stable solid-state electrolyte. First two topics are related to crystallographic structure of metal-oxide films derived from sol-gel precursor, which is shown to be critical for electrochemical performance. The proposed method of microstructure control enables development of electrochromic films which outperform their amorphous or nanocrystalline analogues presented in the state-of-the-art due to their superior chemical and physical properties. Developed materials and processes resulted in electrochemical devices exhibiting optical density on the level of 0.82 and switching time shorter than 3 seconds, reaching performance at practical level. Third topic concerns a new concept of solid state electrolyte based on plastic crystal doped with lithium salt, dispersed in a thermosetting polymer resin network. This soft matter printable electrolyte meets requirements for electrochromic applications, exhibiting ionic conductivities of 10. -6 - 10. -4 S cm-1 at

  4. Capillary Thinning and Pinch-off Dynamics and Printability of Polyelectrolyte Solutions

    Science.gov (United States)

    Sharma, Vivek; Jimenez, Leidy N.; Dinic, Jelena; Parsi, Nikila

    Biological macromolecules like proteins, DNA and polysaccharides, and many industrial polymers, are classified together as polyelectrolytes for in solution, the repeat units in their backbone are decorated with disassociated, charge-bearing ionic groups, surrounded by counter-ions. In diverse applications like inkjet printing, sprayable cosmetics and insecticides, paints and coatings that involve formation of fluid columns or sheets that undergo progressive thinning and pinch-off into drops, the dominant flow within the necking filament is extensional in nature. The extensional rheology response of the charged macromolecular solutions is not as well understood as that of their uncharged counterparts. Here focus on the characterization of capillary thinning and pinch-off dynamics, extensional rheology and printability of two model systems: sodium (polystyrene sulfonate) and poly(acrylic acid) by using dripping-onto-substrate (DoS) rheometry technique. Both the measured extensional relaxation times and the extensional viscosity values show salt- and polymer concentration-dependent behavior that is not expected or anticipated from the typical shear rheology response.

  5. Fully printable, strain-engineered electronic wrap for customizable soft electronics.

    Science.gov (United States)

    Byun, Junghwan; Lee, Byeongmoon; Oh, Eunho; Kim, Hyunjong; Kim, Sangwoo; Lee, Seunghwan; Hong, Yongtaek

    2017-03-24

    Rapid growth of stretchable electronics stimulates broad uses in multidisciplinary fields as well as industrial applications. However, existing technologies are unsuitable for implementing versatile applications involving adaptable system design and functions in a cost/time-effective way because of vacuum-conditioned, lithographically-predefined processes. Here, we present a methodology for a fully printable, strain-engineered electronic wrap as a universal strategy which makes it more feasible to implement various stretchable electronic systems with customizable layouts and functions. The key aspects involve inkjet-printed rigid island (PRI)-based stretchable platform technology and corresponding printing-based automated electronic functionalization methodology, the combination of which provides fully printed, customized layouts of stretchable electronic systems with simplified process. Specifically, well-controlled contact line pinning effect of printed polymer solution enables the formation of PRIs with tunable thickness; and surface strain analysis on those PRIs leads to the optimized stability and device-to-island fill factor of strain-engineered electronic wraps. Moreover, core techniques of image-based automated pinpointing, surface-mountable device based electronic functionalizing, and one-step interconnection networking of PRIs enable customized circuit design and adaptable functionalities. To exhibit the universality of our approach, multiple types of practical applications ranging from self-computable digital logics to display and sensor system are demonstrated on skin in a customized form.

  6. Fully printable, strain-engineered electronic wrap for customizable soft electronics

    Science.gov (United States)

    Byun, Junghwan; Lee, Byeongmoon; Oh, Eunho; Kim, Hyunjong; Kim, Sangwoo; Lee, Seunghwan; Hong, Yongtaek

    2017-03-01

    Rapid growth of stretchable electronics stimulates broad uses in multidisciplinary fields as well as industrial applications. However, existing technologies are unsuitable for implementing versatile applications involving adaptable system design and functions in a cost/time-effective way because of vacuum-conditioned, lithographically-predefined processes. Here, we present a methodology for a fully printable, strain-engineered electronic wrap as a universal strategy which makes it more feasible to implement various stretchable electronic systems with customizable layouts and functions. The key aspects involve inkjet-printed rigid island (PRI)-based stretchable platform technology and corresponding printing-based automated electronic functionalization methodology, the combination of which provides fully printed, customized layouts of stretchable electronic systems with simplified process. Specifically, well-controlled contact line pinning effect of printed polymer solution enables the formation of PRIs with tunable thickness; and surface strain analysis on those PRIs leads to the optimized stability and device-to-island fill factor of strain-engineered electronic wraps. Moreover, core techniques of image-based automated pinpointing, surface-mountable device based electronic functionalizing, and one-step interconnection networking of PRIs enable customized circuit design and adaptable functionalities. To exhibit the universality of our approach, multiple types of practical applications ranging from self-computable digital logics to display and sensor system are demonstrated on skin in a customized form.

  7. Hole-Transporting Materials for Printable Perovskite Solar Cells

    Directory of Open Access Journals (Sweden)

    Paola Vivo

    2017-09-01

    Full Text Available Perovskite solar cells (PSCs represent undoubtedly the most significant breakthrough in photovoltaic technology since the 1970s, with an increase in their power conversion efficiency from less than 5% to over 22% in just a few years. Hole-transporting materials (HTMs are an essential building block of PSC architectures. Currently, 2,2’,7,7’-tetrakis-(N,N’-di-p-methoxyphenylamine-9,9’-spirobifluorene, better known as spiro-OMeTAD, is the most widely-used HTM to obtain high-efficiency devices. However, it is a tremendously expensive material with mediocre hole carrier mobility. To ensure wide-scale application of PSC-based technologies, alternative HTMs are being proposed. Solution-processable HTMs are crucial to develop inexpensive, high-throughput and printable large-area PSCs. In this review, we present the most recent advances in the design and development of different types of HTMs, with a particular focus on mesoscopic PSCs. Finally, we outline possible future research directions for further optimization of the HTMs to achieve low-cost, stable and large-area PSCs.

  8. Printable low-cost sensor systems for healthcare smart textiles

    Science.gov (United States)

    Rai, Pratyush; Kumar, Prashanth S.; Oh, Sechang; Kwon, Hyeokjun; Mathur, Gyanesh N.; Varadan, Vijay K.

    2011-04-01

    Smart textiles-based wearable health monitoring systems (ST-HMS) have been presented as elegant solutions to the requirements of individuals across a wide range of ages. They can be used to monitor young or elderly recuperating /convalescent patients either in hospital or at home, or they can be used by young athletes to monitor important physiological parameters to better design their training or fitness program. Business and academic interests, all over the world, have fueled a great deal of work in the development of this technology since 1990. However, two important impediments to the development of ST-HMS are:-integration of flexible electrodes, flexible sensors, signal conditioning circuits and data logging or wireless transmission devices into a seamless garment and a means to mass manufacture the same, while keeping the costs low. Roll-to-roll printing and screen printing are two low cost methods for large scale manufacturing on flexible substrates and can be extended to textiles as well. These two methods are, currently, best suited for planar structures. The sensors, integrated with wireless telemetry, facilitate development of a ST-HMS that allows for unobtrusive health monitoring. In this paper, we present our results with planar screen printable sensors based on conductive inks which can be used to monitor EKG, abdominal respiration effort, blood pressure, pulse rate and body temperature. The sensor systems were calibrated, and tested for sensitivity, reliability and robustness to ensure reuse after washing cycles.

  9. Towards a fully printable battery: robocast deposition of separators

    International Nuclear Information System (INIS)

    Atanassov, Plamen Borissov; Fenton, Kyle Ross; Apblett, Christopher Alan

    2010-01-01

    The development of thin batteries has presented several interesting problems which are not seen in traditional battery sizes. As the size of a battery reaches a minimum, the usable capacity of the battery decreases due to the fact that the major constituent of the battery becomes the package and separator. As the size decreases, the volumetric contribution from the package and separator increases. This can result in a reduction of capacity from these types of batteries of nearly all of the available power. The development of a method for directly printing the battery layers, including the package, in place would help to alleviate this problem. The technology used in this paper to directly print battery components is known as robocasting and is capable of direct writing of slurries in complex geometries. This method is also capable of conformally printing on three dimensional surfaces, opening up the possibility of novel batteries based on tailoring battery footprints to conform to the available substrate geometry. Interfacial resistance can also be reduced by using the direct write method. Each layer is printed in place on the battery stack instead of being stacked one at a time. This ensures an intimate contact and seal at every interface within the cell. By limiting the resistance at these interfaces, we effectively help increase the useable capacity of our battery through increase transport capability. We have developed methodology for printing several different separator materials for use in a lithium cell. When combined with a printable cathode comprised of LiFePO 4 (as seen in Figure 1) and a lithium anode, our battery is capable of delivering a theoretical capacity of 170 mAh g -1 . This capacity is diminished by transport phenomena within the cell which limit the transport rate of the lithium ions during the discharge cycle. The material set chosen for the printable separator closely resemble those used in commercially available separators in order to keep

  10. Transparent and Printable Regenerated Kenaf Cellulose/PVA Film

    Directory of Open Access Journals (Sweden)

    Hatika Kaco

    2014-02-01

    Full Text Available Cellulose was extracted from kenaf core powder by a series of bleaching processes and subsequently dissolved using an alkaline LiOH/urea solvent at low temperatures. The produced cellulose solution was mixed with polyvinyl alcohol (PVA with different ratios of cellulose/PVA and coagulated to produce regenerated transparent films. The films were then air dried to produce transparent film. The effects of PVA content on tensile index, transparency, pore size, and printability of the films were studied. A slight reduction of 7% on the tensile index of the film was observed when the content of PVA increased to 10%. Nevertheless, the addition of 10% of PVA increased the porosity of the regenerated cellulose/PVA film, while the transparency of the film increased by 10%. The films were color-printed using a laser printer and can be recycled, in which the printed ink can be removed easily from the films with higher amount of PVA content. In addition, the films can be reprinted repeatedly several times.

  11. Hole-Transporting Materials for Printable Perovskite Solar Cells

    Science.gov (United States)

    Salunke, Jagadish K.; Priimagi, Arri

    2017-01-01

    Perovskite solar cells (PSCs) represent undoubtedly the most significant breakthrough in photovoltaic technology since the 1970s, with an increase in their power conversion efficiency from less than 5% to over 22% in just a few years. Hole-transporting materials (HTMs) are an essential building block of PSC architectures. Currently, 2,2’,7,7’-tetrakis-(N,N’-di-p-methoxyphenylamine)-9,9’-spirobifluorene), better known as spiro-OMeTAD, is the most widely-used HTM to obtain high-efficiency devices. However, it is a tremendously expensive material with mediocre hole carrier mobility. To ensure wide-scale application of PSC-based technologies, alternative HTMs are being proposed. Solution-processable HTMs are crucial to develop inexpensive, high-throughput and printable large-area PSCs. In this review, we present the most recent advances in the design and development of different types of HTMs, with a particular focus on mesoscopic PSCs. Finally, we outline possible future research directions for further optimization of the HTMs to achieve low-cost, stable and large-area PSCs. PMID:28914823

  12. Printable and Rewritable Full Block Copolymer Structural Color.

    Science.gov (United States)

    Kang, Han Sol; Lee, Jinseong; Cho, Suk Man; Park, Tae Hyun; Kim, Min Ju; Park, Chanho; Lee, Seung Won; Kim, Kang Lib; Ryu, Du Yeol; Huh, June; Thomas, Edwin L; Park, Cheolmin

    2017-08-01

    Structural colors (SCs) of photonic crystals (PCs) arise from selective constructive interference of incident light. Here, an ink-jet printable and rewritable block copolymer (BCP) SC display is demonstrated, which can be quickly written and erased over 50 times with resolution nearly equivalent to that obtained with a commercial office ink-jet printer. Moreover, the writing process employs an easily modified printer for position- and concentration-controlled deposition of a single, colorless, water-based ink containing a reversible crosslinking agent, ammonium persulfate. Deposition of the ink onto a self-assembled BCP PC film comprising a 1D stack of alternating layers enables differential swelling of the written BCP film and produces a full-colored SC display of characters and images. Furthermore, the information can be readily erased and the system can be reset by application of hydrogen bromide. Subsequently, new information can be rewritten, resulting in a chemically rewritable BCP SC display. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  13. Drop-on-Demand Inkjet Printhead Performance Enhancement by Dynamic Lumped Element Modeling for Printable Electronics Fabrication

    Directory of Open Access Journals (Sweden)

    Maowei He

    2014-01-01

    Full Text Available The major challenge in printable electronics fabrication is the print resolution and accuracy. In this paper, the dynamic lumped element model (DLEM is proposed to directly simulate an inkjet-printed nanosilver droplet formation process and used for predictively controlling jetting characteristics. The static lumped element model (LEM previously developed by the authors is extended to dynamic model with time-varying equivalent circuits to characterize nonlinear behaviors of piezoelectric printhead. The model is then used to investigate how performance of the piezoelectric ceramic actuator influences jetting characteristics of nanosilver ink. Finally, the proposed DLEM is applied to predict the printing quality using nanosilver ink. Experimental results show that, compared to other analytic models, the proposed DLEM has a simpler structure with the sufficient simulation and prediction accuracy.

  14. Fulltext PDF

    Indian Academy of Sciences (India)

    dinitroamino pyrrole derivatives were studied at the B3LYP/6-311G** level of density functional theory (DFT). The isodesmic reactions were employed to calculate the heats of formation (HOFs) for these compounds. The detonation velocity (D) and.

  15. Fulltext PDF

    Indian Academy of Sciences (India)

    IAS Admin

    2013-09-10

    Sep 10, 2013 ... A copy of the application format, instructions to applicants including eligibility criteria ... of recommendation to be forwarded by the teacher in the case of student applicants. The last ... Chairman, Joint Science Education Panel.

  16. Fulltext PDF

    Indian Academy of Sciences (India)

    ical structure formation, the 21-cm intensity mapping may allow us to distinguish between dark energy models which are otherwise degenerate at the level of their pre- .... Primordial cosmological density fluctuations drive acoustic waves in the ...

  17. Fulltext PDF

    Indian Academy of Sciences (India)

    0008471

    through reversible anion exchange mechanism. Regular ... The catalytic system will be readily applicable to large-scale production of NMSBA. ... cleavages. Rapid Communication ... Cover picture: Dynamics of Interstellar Glycine Formation.

  18. Fulltext PDF

    Indian Academy of Sciences (India)

    management and ... centres) have begun to use online database search systems like .... up of documents for formatting purposes, HTMl supports a very powerful feature .... technology underlying NCSTRL is a network of inter-operating.

  19. Fulltext PDF

    Indian Academy of Sciences (India)

    Srinivas

    Functional embryo sac formation in Arabidopsis without meiosis – one ... centromere organization during meiosis. In swi1 ... megaspore undergoes three rounds of mitosis to produce a seven-celled gamete structure also called an embryo sac.

  20. Fulltext PDF

    Indian Academy of Sciences (India)

    WINTEC

    Retarded Boson–Fermion interaction in atomic sys- tems. 351 see Panda A ... Diabatic potential energy surfaces of H. +. + CO. 409 .... proteins from synchronous fluorescence spectra and ... Effect of electrostatic interactions on the formation of.

  1. Fulltext PDF

    Indian Academy of Sciences (India)

    Unknown

    his first students, Max Perutz6 and Dorothy Crowfoot. Hodgkin7 .... As a student in Cambridge just after the. Great War, he ... be subjected to the Research Assessment Exercise of the ..... tive formative roles of environmental and genetic factors.

  2. Fulltext PDF

    Indian Academy of Sciences (India)

    naires were compared with those of 60 students from a control group that was not yet ..... important formative influence for the students regarding their ... V H Heywood (ed), Global biodiversity assessment, University Press,. Cambridge, 1995.

  3. Low Mass Printable Devices for Energy Capture, Storage, and Use

    Science.gov (United States)

    Frazier, Donald O.; Singer, Christopher E.; Rogers, Jan R.; Schramm, Harry F.; Fabisinski, Leo L.; Lowenthal, Mark; Ray, William J.; Fuller, Kirk A.

    2010-01-01

    The energy-efficient, environmentally friendly technology that will be presented is the result of a Space Act Agreement between NthDegree Technologies Worldwide, Inc., and the National Aeronautics and Space Administration's (NASA's) Marshall Space Flight Center (MSFC). The work combines semiconductor and printing technologies to advance lightweight electronic and photonic devices having excellent potential for commercial and exploration applications. Device development involves three projects that relate to energy generation and consumption: (1) a low-mass efficient (low power, low heat emission) micro light-emitting diode (LED) area lighting device; (2) a low-mass omni-directional efficient photovoltaic (PV) device with significantly improved energy capture; and (3) a new approach to building super-capacitors. These three technologies, energy capture, storage, and usage (e.g., lighting), represent a systematic approach for building efficient local micro-grids that are commercially feasible; furthermore, these same technologies, appropriately replacing lighting with lightweight power generation, will be useful for enabling inner planetary missions using smaller launch vehicles and to facilitate surface operations during lunar and planetary surface missions. The PV device model is a two sphere, light trapped sheet approximately 2-mm thick. The model suggests a significant improvement over current thin film systems. For lighting applications, all three technology components are printable in-line by printing sequential layers on a standard screen or flexographic direct impact press using the three-dimensional printing technique (3DFM) patented by NthDegree. One primary contribution to this work in the near term by the MSFC is to test the robustness of prototype devices in the harsh environments that prevail in space and on the lunar surface. It is anticipated that this composite device, of which the lighting component has passed off-gassing testing, will function

  4. Open-Source 3D-Printable Optics Equipment

    Science.gov (United States)

    Zhang, Chenlong; Anzalone, Nicholas C.; Faria, Rodrigo P.; Pearce, Joshua M.

    2013-01-01

    Just as the power of the open-source design paradigm has driven down the cost of software to the point that it is accessible to most people, the rise of open-source hardware is poised to drive down the cost of doing experimental science to expand access to everyone. To assist in this aim, this paper introduces a library of open-source 3-D-printable optics components. This library operates as a flexible, low-cost public-domain tool set for developing both research and teaching optics hardware. First, the use of parametric open-source designs using an open-source computer aided design package is described to customize the optics hardware for any application. Second, details are provided on the use of open-source 3-D printers (additive layer manufacturing) to fabricate the primary mechanical components, which are then combined to construct complex optics-related devices. Third, the use of the open-source electronics prototyping platform are illustrated as control for optical experimental apparatuses. This study demonstrates an open-source optical library, which significantly reduces the costs associated with much optical equipment, while also enabling relatively easily adapted customizable designs. The cost reductions in general are over 97%, with some components representing only 1% of the current commercial investment for optical products of similar function. The results of this study make its clear that this method of scientific hardware development enables a much broader audience to participate in optical experimentation both as research and teaching platforms than previous proprietary methods. PMID:23544104

  5. Open-source 3D-printable optics equipment.

    Science.gov (United States)

    Zhang, Chenlong; Anzalone, Nicholas C; Faria, Rodrigo P; Pearce, Joshua M

    2013-01-01

    Just as the power of the open-source design paradigm has driven down the cost of software to the point that it is accessible to most people, the rise of open-source hardware is poised to drive down the cost of doing experimental science to expand access to everyone. To assist in this aim, this paper introduces a library of open-source 3-D-printable optics components. This library operates as a flexible, low-cost public-domain tool set for developing both research and teaching optics hardware. First, the use of parametric open-source designs using an open-source computer aided design package is described to customize the optics hardware for any application. Second, details are provided on the use of open-source 3-D printers (additive layer manufacturing) to fabricate the primary mechanical components, which are then combined to construct complex optics-related devices. Third, the use of the open-source electronics prototyping platform are illustrated as control for optical experimental apparatuses. This study demonstrates an open-source optical library, which significantly reduces the costs associated with much optical equipment, while also enabling relatively easily adapted customizable designs. The cost reductions in general are over 97%, with some components representing only 1% of the current commercial investment for optical products of similar function. The results of this study make its clear that this method of scientific hardware development enables a much broader audience to participate in optical experimentation both as research and teaching platforms than previous proprietary methods.

  6. Open-source 3D-printable optics equipment.

    Directory of Open Access Journals (Sweden)

    Chenlong Zhang

    Full Text Available Just as the power of the open-source design paradigm has driven down the cost of software to the point that it is accessible to most people, the rise of open-source hardware is poised to drive down the cost of doing experimental science to expand access to everyone. To assist in this aim, this paper introduces a library of open-source 3-D-printable optics components. This library operates as a flexible, low-cost public-domain tool set for developing both research and teaching optics hardware. First, the use of parametric open-source designs using an open-source computer aided design package is described to customize the optics hardware for any application. Second, details are provided on the use of open-source 3-D printers (additive layer manufacturing to fabricate the primary mechanical components, which are then combined to construct complex optics-related devices. Third, the use of the open-source electronics prototyping platform are illustrated as control for optical experimental apparatuses. This study demonstrates an open-source optical library, which significantly reduces the costs associated with much optical equipment, while also enabling relatively easily adapted customizable designs. The cost reductions in general are over 97%, with some components representing only 1% of the current commercial investment for optical products of similar function. The results of this study make its clear that this method of scientific hardware development enables a much broader audience to participate in optical experimentation both as research and teaching platforms than previous proprietary methods.

  7. Fulltext PDF

    Indian Academy of Sciences (India)

    Unknown

    Chapter I (Introduction) is six pages packed with use- ful information. It describes the Neurospora crassa life cycle ... information that is available on the Internet, and also provides information on scientific meetings. ... uses the per (perithecial color) mutant to show barrage formation as a manifestation of heterokaryon incom-.

  8. Fulltext PDF

    Indian Academy of Sciences (India)

    0001195

    molybdate solution leads to the formation of ion pair compounds having supramolecular framework structures. These organic amines are trapped as guest or as part of the framework making the present system ... Evaluation of micellar properties of sodium dodecylbenzene ... In addition, the direct pseudo multicomponent.

  9. Fulltext PDF

    Indian Academy of Sciences (India)

    client1

    in the websites of the three Academies. Proposals are invited from interested students and teachers from colleges affiliated to UGC/ AICTE/MCI/. State Universities accredited institutions for these Fellowships. The proposal should include a brief resume of the applicant (see format), a one-page description of the planned ...

  10. Fulltext PDF

    Indian Academy of Sciences (India)

    nitrone system with electron withdrawing N-substituent might be more stable than a smaller non-conjugated one, though it has not been reported experimentally, so far. In other words, we have tried to choose a pos- sible stable nitrone system as the starting material so that maximum chance of oxaziridine formation can be.

  11. Fulltext PDF

    Indian Academy of Sciences (India)

    PRAKASH KUMAR

    2007-08-17

    Aug 17, 2007 ... also deeply affected our day-to-day life, with the rapid use of artificial satellites in ... They spent nights discussing the launch of Sputnik-1 and its .... evolution, inexorably leading to the formation of intelligent organisms ...

  12. Fulltext PDF

    Indian Academy of Sciences (India)

    because they spend their nights in a few restricted spots in dense congregations, but fan out over a wider area to feed during the day. Such communal roosting is characteristic of the crows and several other common species of ... Formation of.

  13. Fulltext PDF

    Indian Academy of Sciences (India)

    Unknown

    and in spectral quality over the course of each day, in addition to the changing ratio of light and dark- ... Spore formation in fungal clock mutants with a short period occurs earlier in the night compared to wild type strains, and hamsters are.

  14. Fulltext PDF

    Indian Academy of Sciences (India)

    Unknown

    formation of three intermolecular interactions. Keywords. Crystal structure; molecular interactions; X-ray diffraction; X-ray diffractometer; trifurcated acceptor. 1. Introduction. Alkaloids are used for the treatment of asthma, cough, tuberculosis, etc (Thappa et al 1996). They are also widely being abused as a recreational drug.

  15. Fulltext PDF

    Indian Academy of Sciences (India)

    billion years today. A mere quarter billion years from the big bang and already forming stars? Theoretical cosmologists would regard this as surprising, and would probably look to other models. The other piece of work bearing on the formation of galaxies is a rather different kind of observation. Dunlop and coworkers report.

  16. Fulltext PDF

    Indian Academy of Sciences (India)

    together to form larger, more complex formations. Thus proteins, amongst the most vital of the larger molecules of life, are formed by linking together several amino acids in long chains. Now consider the great variety of such chains that may be formed by choosing one out of twenty amino acids in each position. With just coo-.

  17. Fulltext PDF

    Indian Academy of Sciences (India)

    blurred and finally the image of the distant object emerges. Let us consider the object to be the sun, which is practically at infinity. Hence, the aperture receives parallel rays. As the screen is moved away from the aperture one enters different regions of the image space. The optics of image formation is shown in the. Figure 1 ...

  18. Fulltext PDF

    Indian Academy of Sciences (India)

    Chemistry as Catalysts for the Formation of Cyclic Carbonates from. Carbon Dioxide and ... in the same period.1,2 As a solution to such a serious problem, carbon dioxide ...... are summarized in experimental part. As expected for the eight ...

  19. Fulltext PDF

    Indian Academy of Sciences (India)

    0001195

    It can be a potential enabler for scientists engaged in drug discovery in general and in anti-TB research in particular. On the effect of external perturbation on amino acid salt bridge: a DFT study. Biswa Jyoti Dutta, Nabajit Sarmah and. Pradip KR Bhattacharyya. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .533–541. Salt-bridge formation ...

  20. Fulltext PDF

    Indian Academy of Sciences (India)

    to date, no data are available on size-distributions of aerosols of various species at this site. From the diurnal variation of aerosol size distri- butions reported in Chate and Pranesha (2004), the baseline distributions at 0300h IST (corres- ponding to 82.5. ◦. E longitude), depleted number distributions owing to fog formation at ...

  1. Fulltext PDF

    Indian Academy of Sciences (India)

    L1), Br (L2), Cl ... AgNO3 using methanol as solvent leads to formation of linear ... ambidentate character can be rationalized in terms of .... internal TMS and external 85% phosphoric acid ... resonances occur at lower field with respect to free.

  2. Fulltext PDF

    Indian Academy of Sciences (India)

    2012-07-20

    Jul 20, 2012 ... formation of cellular clones characterized by the presence or absence of these .... of a tumour is an injury to respiration. The requirement for the cell ... cells, tissues and organs – took place during develop- ment. Somehow, he ...

  3. Fulltext PDF

    Indian Academy of Sciences (India)

    Administrator

    used as building blocks for the formation of metal– non-metal clusters. In this study, we report the pos- sible existence and reactivity of a variety of all- metal and ..... 9. (a) Sen K D and Jorgenson C K 1987 Structure and bonding, electronegativity (eds Berlin: Springer) vol. 66; (b) Parr R G, Donnelly R A, Levy M and Palke W.

  4. Fulltext PDF

    Indian Academy of Sciences (India)

    in π–π stacking with purine and pyrimidine bases. This can lead to complex formation with DNA subunits, which is an important target in cancer chemotherapy.8. Besides this, non-covalent interaction of palladium complexes with nucleic acids is also possible.9 This type of non-covalent interaction may inhibit the reactiv-.

  5. Fulltext PDF

    Indian Academy of Sciences (India)

    operate between colloidal particles and then take the reader through the discovery of a new, strong and long ranged force .... Consider two containers, ..... a certain concentration (known as critical micelle concentration), the surfactant molecules come together .... A slight variation of the above line of thinking is -the formation.

  6. Fulltext PDF

    Indian Academy of Sciences (India)

    Madhsudhan

    There exists three groups of mGluRs (types I, II and III), accounting for a total of ... These authors report that mice devoid of the mGluR5 ... contribute to the formation of the classic columnar neuronal arrangements typical of the barrel cortex.

  7. Fulltext PDF

    Indian Academy of Sciences (India)

    2+1 D particles, the formative stage of the horizon lasts only a finite time and is over as .... of singularities S that travel at faster-than-light speed toward the particles. .... The horizon enters the real spacetime at a point on the geodesic between.

  8. Fulltext PDF

    Indian Academy of Sciences (India)

    their roots in biological fields of wide scope, such as the relationship ... pressed by the observation that in anomalous eyes some- times formed in ectopic ... formation as one-step induction by the optic vesicle and the exclusive ... Results obtained utilizing molecular techniques revealed that free ..... the near future. We should ...

  9. Fulltext PDF

    Indian Academy of Sciences (India)

    M. Senthilkumar (Newgen Imaging) 1461 1996 Oct 15 13:05:22

    sented and the maps are presented in the appropri- ate scales, in user-friendly formats and with clarity. With the objective of working towards effective procedures for microzonation of urban centers, the Programme Advisory and Monitoring Commit- tee (PAMC) of Seismology Division, Department of Science and Technology ...

  10. Fulltext PDF

    Indian Academy of Sciences (India)

    Wintec

    CPC) in the formation of PMO nanophases was explored. While in the case of DPC NRs were obtained, nanofibrils were ob- tained using CPC as shown in figure 5. The differ- ence in the morphology could possibly be due to the increase in the ...

  11. Deep PDF parsing to extract features for detecting embedded malware.

    Energy Technology Data Exchange (ETDEWEB)

    Munson, Miles Arthur; Cross, Jesse S. (Missouri University of Science and Technology, Rolla, MO)

    2011-09-01

    The number of PDF files with embedded malicious code has risen significantly in the past few years. This is due to the portability of the file format, the ways Adobe Reader recovers from corrupt PDF files, the addition of many multimedia and scripting extensions to the file format, and many format properties the malware author may use to disguise the presence of malware. Current research focuses on executable, MS Office, and HTML formats. In this paper, several features and properties of PDF Files are identified. Features are extracted using an instrumented open source PDF viewer. The feature descriptions of benign and malicious PDFs can be used to construct a machine learning model for detecting possible malware in future PDF files. The detection rate of PDF malware by current antivirus software is very low. A PDF file is easy to edit and manipulate because it is a text format, providing a low barrier to malware authors. Analyzing PDF files for malware is nonetheless difficult because of (a) the complexity of the formatting language, (b) the parsing idiosyncrasies in Adobe Reader, and (c) undocumented correction techniques employed in Adobe Reader. In May 2011, Esparza demonstrated that PDF malware could be hidden from 42 of 43 antivirus packages by combining multiple obfuscation techniques [4]. One reason current antivirus software fails is the ease of varying byte sequences in PDF malware, thereby rendering conventional signature-based virus detection useless. The compression and encryption functions produce sequences of bytes that are each functions of multiple input bytes. As a result, padding the malware payload with some whitespace before compression/encryption can change many of the bytes in the final payload. In this study we analyzed a corpus of 2591 benign and 87 malicious PDF files. While this corpus is admittedly small, it allowed us to test a system for collecting indicators of embedded PDF malware. We will call these indicators features throughout

  12. A step toward development of printable dosage forms for poorly soluble drugs

    DEFF Research Database (Denmark)

    Raijada, Dharaben Kaushikkumar; Genina, Natalja; Fors, Daniela

    2013-01-01

    The purpose of this study was to formulate printable dosage forms for a poorly soluble drug (piroxicam; PRX) and to gain understanding of critical parameters to be considered during development of such dosage forms. Liquid formulations of PRX were printed on edible paper using piezoelectric inkjet...

  13. Effect of Electrochemically Deposited MgO Coating on Printable Perovskite Solar Cell Performance

    Directory of Open Access Journals (Sweden)

    T.A. Nirmal Peiris

    2017-02-01

    Full Text Available Herein, we studied the effect of MgO coating thickness on the performance of printable perovskite solar cells (PSCs by varying the electrodeposition time of Mg(OH2 on the fluorine-doped tin oxide (FTO/TiO2 electrode. Electrodeposited Mg(OH2 in the electrode was confirmed by energy dispersive X-ray (EDX analysis and scanning electron microscopic (SEM images. The performance of printable PSC structures on different deposition times of Mg(OH2 was evaluated on the basis of their photocurrent density-voltage characteristics. The overall results confirmed that the insulating MgO coating has an adverse effect on the photovoltaic performance of the solid state printable PSCs. However, a marginal improvement in the device efficiency was obtained for the device made with the 30 s electrodeposited TiO2 electrode. We believe that this undesirable effect on the photovoltaic performance of the printable PSCs is due to the higher coverage of TiO2 by the insulating MgO layer attained by the electrodeposition technique.

  14. ILT based defect simulation of inspection images accurately predicts mask defect printability on wafer

    Science.gov (United States)

    Deep, Prakash; Paninjath, Sankaranarayanan; Pereira, Mark; Buck, Peter

    2016-05-01

    At advanced technology nodes mask complexity has been increased because of large-scale use of resolution enhancement technologies (RET) which includes Optical Proximity Correction (OPC), Inverse Lithography Technology (ILT) and Source Mask Optimization (SMO). The number of defects detected during inspection of such mask increased drastically and differentiation of critical and non-critical defects are more challenging, complex and time consuming. Because of significant defectivity of EUVL masks and non-availability of actinic inspection, it is important and also challenging to predict the criticality of defects for printability on wafer. This is one of the significant barriers for the adoption of EUVL for semiconductor manufacturing. Techniques to decide criticality of defects from images captured using non actinic inspection images is desired till actinic inspection is not available. High resolution inspection of photomask images detects many defects which are used for process and mask qualification. Repairing all defects is not practical and probably not required, however it's imperative to know which defects are severe enough to impact wafer before repair. Additionally, wafer printability check is always desired after repairing a defect. AIMSTM review is the industry standard for this, however doing AIMSTM review for all defects is expensive and very time consuming. Fast, accurate and an economical mechanism is desired which can predict defect printability on wafer accurately and quickly from images captured using high resolution inspection machine. Predicting defect printability from such images is challenging due to the fact that the high resolution images do not correlate with actual mask contours. The challenge is increased due to use of different optical condition during inspection other than actual scanner condition, and defects found in such images do not have correlation with actual impact on wafer. Our automated defect simulation tool predicts

  15. Download this PDF file

    African Journals Online (AJOL)

    2009-09-19

    included questions on number of years in practice, number of patients seen per day and the type of practice. knowledge ... paeditricians and other health professionals who work with children. Primary preventive strategies for ..... fammed.musc.edu/fmc/data/pdf/ fmcrfinal/specialtopics.pdf. Accessed. September 19, 2009. 21.

  16. Printable optical sensors based on H-bonded supramolecular cholesteric liquid crystal networks.

    Science.gov (United States)

    Herzer, Nicole; Guneysu, Hilal; Davies, Dylan J D; Yildirim, Derya; Vaccaro, Antonio R; Broer, Dirk J; Bastiaansen, Cees W M; Schenning, Albertus P H J

    2012-05-09

    A printable H-bonded cholesteric liquid crystal (CLC) polymer film has been fabricated that, after conversion to a hygroscopic polymer salt film, responds to temperature and humidity by changing its reflection color. Fast-responding humidity sensors have been made in which the reflection color changes between green and yellow depending on the relative humidity. The change in reflection band is a result of a change in helix pitch in the film due to absorption and desorption of water, resulting in swelling/deswelling of the film material. When the polymer salt was saturated with water, a red-reflecting film was obtained that can potentially act as a time/temperature integrator. Finally, the films were printed on a foil, showing the potential application of supramolecular CLC materials as low-cost, printable, battery-free optical sensors.

  17. 3D printable highly conductive and mechanically strong thermoplastic-based nanocomposites

    Science.gov (United States)

    Tabiai, Ilyass; Therriault, Daniel

    Highly conductive 3D printable inks can be used to design electrical devices with various functionalities and geometries. We use the solvent evaporation assisted 3D-printing method to create high resolution structures made of poly(lactid) acid (PLA) reinforced with multi-walled carbon nanotube (MWCNTs). We characterize fibers with diameters ranging between 100 μm to 330 μm and reinforced with MWCNTs from 0.5 up to 40wt% here. Tensile test, shrinkage ratio, density and electrical conductivity measurements of the printed nanocomposite are presented. The material's electrical conductivity is strongly improved by adding MWCNTs (up to 3000S/m), this value was found to be higher than any 3D-printable carbon based material available in the literature. It is observed that MWCNTs significantly increase the material's strength and stiffness while reducing its ductility. The ink's density was also higher while still being in the range of polymers' densities. The presented nanocomposite is light weight, highly conductive, has good mechanical properties and can be printed in a freeform fashion at the micro scale. A myriad of low power consumption with less resistive heating sensors and devices can potentially be designed using it and integrated into other 3D printable products.

  18. Dynamic Link Inclusion in Online PDF Journals

    OpenAIRE

    Probets, Steve; Brailsford, David; Carr, Les; Hall, Wendy

    1998-01-01

    Two complementary de facto standards for the publication of electronic documents are HTML on theWorldWideWeb and Adobe s PDF (Portable Document Format) language for use with Acrobat viewers. Both these formats provide support for hypertext features to be embedded within documents. We present a method, which allows links and other hypertext material to be kept in an abstract form in separate link databases. The links can then be interpreted or compiled at any stage and applied, in the correct ...

  19. Nanothin Coculture Membranes with Tunable Pore Architecture and Thermoresponsive Functionality for Transfer-Printable Stem Cell-Derived Cardiac Sheets.

    Science.gov (United States)

    Ryu, Seungmi; Yoo, Jin; Jang, Yeongseon; Han, Jin; Yu, Seung Jung; Park, Jooyeon; Jung, Seon Yeop; Ahn, Kyung Hyun; Im, Sung Gap; Char, Kookheon; Kim, Byung-Soo

    2015-10-27

    Coculturing stem cells with the desired cell type is an effective method to promote the differentiation of stem cells. The features of the membrane used for coculturing are crucial to achieving the best outcome. Not only should the membrane act as a physical barrier that prevents the mixing of the cocultured cell populations, but it should also allow effective interactions between the cells. Unfortunately, conventional membranes used for coculture do not sufficiently meet these requirements. In addition, cell harvesting using proteolytic enzymes following coculture impairs cell viability and the extracellular matrix (ECM) produced by the cultured cells. To overcome these limitations, we developed nanothin and highly porous (NTHP) membranes, which are ∼20-fold thinner and ∼25-fold more porous than the conventional coculture membranes. The tunable pore size of NTHP membranes at the nanoscale level was found crucial for the formation of direct gap junctions-mediated contacts between the cocultured cells. Differentiation of the cocultured stem cells was dramatically enhanced with the pore size-customized NTHP membrane system compared to conventional coculture methods. This was likely due to effective physical contacts between the cocultured cells and the fast diffusion of bioactive molecules across the membrane. Also, the thermoresponsive functionality of the NTHP membranes enabled the efficient generation of homogeneous, ECM-preserved, highly viable, and transfer-printable sheets of cardiomyogenically differentiated cells. The coculture platform developed in this study would be effective for producing various types of therapeutic multilayered cell sheets that can be differentiated from stem cells.

  20. Comments on PDF methods

    Science.gov (United States)

    Chen, J.-Y.

    1992-01-01

    Viewgraphs are presented on the following topics: the grand challenge of combustion engineering; research of probability density function (PDF) methods at Sandia; experiments of turbulent jet flames (Masri and Dibble, 1988); departures from chemical equilibrium; modeling turbulent reacting flows; superequilibrium OH radical; pdf modeling of turbulent jet flames; scatter plot for CH4 (methane) and O2 (oxygen); methanol turbulent jet flames; comparisons between predictions and experimental data; and turbulent C2H4 jet flames.

  1. Extra Dimensions: 3D in PDF Documentation

    International Nuclear Information System (INIS)

    Graf, Norman A

    2012-01-01

    Experimental science is replete with multi-dimensional information which is often poorly represented by the two dimensions of presentation slides and print media. Past efforts to disseminate such information to a wider audience have failed for a number of reasons, including a lack of standards which are easy to implement and have broad support. Adobe's Portable Document Format (PDF) has in recent years become the de facto standard for secure, dependable electronic information exchange. It has done so by creating an open format, providing support for multiple platforms and being reliable and extensible. By providing support for the ECMA standard Universal 3D (U3D) and the ISO PRC file format in its free Adobe Reader software, Adobe has made it easy to distribute and interact with 3D content. Until recently, Adobe's Acrobat software was also capable of incorporating 3D content into PDF files from a variety of 3D file formats, including proprietary CAD formats. However, this functionality is no longer available in Acrobat X, having been spun off to a separate company. Incorporating 3D content now requires the additional purchase of a separate plug-in. In this talk we present alternatives based on open source libraries which allow the programmatic creation of 3D content in PDF format. While not providing the same level of access to CAD files as the commercial software, it does provide physicists with an alternative path to incorporate 3D content into PDF files from such disparate applications as detector geometries from Geant4, 3D data sets, mathematical surfaces or tesselated volumes.

  2. 'Printability' of Candidate Biomaterials for Extrusion Based 3D Printing: State-of-the-Art.

    Science.gov (United States)

    Kyle, Stuart; Jessop, Zita M; Al-Sabah, Ayesha; Whitaker, Iain S

    2017-08-01

    Regenerative medicine has been highlighted as one of the UK's 8 'Great Technologies' with the potential to revolutionize patient care in the 21st Century. Over the last decade, the concept of '3D bioprinting' has emerged, which allows the precise deposition of cell laden bioinks with the aim of engineering complex, functional tissues. For 3D printing to be used clinically, there is the need to produce advanced functional biomaterials, a new generation of bioinks with suitable cell culture and high shape/print fidelity, to match or exceed the physical, chemical and biological properties of human tissue. With the rapid increase in knowledge associated with biomaterials, cell-scaffold interactions and the ability to biofunctionalize/decorate bioinks with cell recognition sequences, it is important to keep in mind the 'printability' of these novel materials. In this illustrated review, we define and refine the concept of 'printability' and review seminal and contemporary studies to highlight the current 'state of play' in the field with a focus on bioink composition and concentration, manipulation of nozzle parameters and rheological properties. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  3. UV Ink-Jet printability and durability of stone and foil

    Directory of Open Access Journals (Sweden)

    Tadeja Muck

    2014-07-01

    Full Text Available he use of ultraviolet (UV printing technology has impacted printing industry in last years due to its applicability on many different »absorptive« as well as »non-absorptive« printing materials. The printability of building materials and recycled foils is relatively unknown. For primary building materials like stones, functionality can be explored with the use of UV printing technology; increased visual, informative effect or even “creative printing” of buildings. Also several aspects of recycled foils reusability as a printing material could be find (printed packaging material or also like secondary building materials. In the present study, printability of the stone and recycled foil and durability of UV prints was explored by means of macroscopically and microscopically characterization. Results indicate that higher print quality can be achieved on polished stone and on coated foil, which surfaces have higher smoothness. Durability of UV prints at freezing is higher at unpolished stone and coated foil that is at materials with the higher surface energy.

  4. A Facile Methodology for the Development of a Printable and Flexible All-Solid-State Rechargeable Battery.

    Science.gov (United States)

    De, Bibekananda; Yadav, Amit; Khan, Salman; Kar, Kamal K

    2017-06-14

    Development of printable and flexible energy storage devices is one of the most promising technologies for wearable electronics in textile industry. The present work involves the design of a printable and flexible all-solid-state rechargeable battery for wearable electronics in textile applications. Copper-coated carbon fiber is used to make a poly(ethylene oxide) (PEO)-based polymer nanocomposite for a flexible and conductive current collector layer. Lithium iron phosphate (LiFePO 4 ) and titanium dioxide (TiO 2 ) are utilized to prepare the cathode and anode layers, respectively, with PEO and carbon black composites. The PEO- and Li salt-based solid composite separator layer is utilized for the solid-state and safe electrolyte. Fabrication of all these layers and assembly of them through coating on fabrics are performed in the open atmosphere without using any complex processing, as PEO prevents the degradation of the materials in the open atmosphere. The performance of the battery is evaluated through charge-discharge and open-circuit voltage analyses. The battery shows an open-circuit voltage of ∼2.67 V and discharge time ∼2000 s. It shows similar performance at different repeated bending angles (0° to 180°) and continuous bending along with long cycle life. The application of the battery is also investigated for printable and wearable textile applications. Therefore, this printable, flexible, easily processable, and nontoxic battery with this performance has great potential to be used in portable and wearable textile electronics.

  5. Correlating rheological properties and printability of collagen bioinks: the effects of riboflavin photocrosslinking and pH.

    Science.gov (United States)

    Diamantides, Nicole; Wang, Louis; Pruiksma, Tylar; Siemiatkoski, Joseph; Dugopolski, Caroline; Shortkroff, Sonya; Kennedy, Stephen; Bonassar, Lawrence J

    2017-07-05

    Collagen has shown promise as a bioink for extrusion-based bioprinting, but further development of new collagen bioink formulations is necessary to improve their printability. Screening these formulations by measuring print accuracy is a costly and time consuming process. We hypothesized that rheological properties of the bioink before, during, and/or after gelation can be used to predict printability. In this study, we investigated the effects of riboflavin photocrosslinking and pH on type I collagen bioink rheology before, during, and after gelation and directly correlated these findings to the printability of each bioink formulation. From the riboflavin crosslinking study, results showed that riboflavin crosslinking increased the storage moduli of collagen bioinks, but the degree of improvement was less pronounced at higher collagen concentrations. Dots printed with collagen bioinks with riboflavin crosslinking exhibited smaller dot footprint areas than those printed with collagen bioinks without riboflavin crosslinking. From the pH study, results showed that gelation kinetics and final gel moduli were highly pH dependent and both exhibited maxima around pH 8. The shape fidelity of printed lines was highest at pH 8-9.5. The effect of riboflavin crosslinking and pH on cell viability was assessed using bovine chondrocytes. Cell viability in collagen gels was found to decrease after blue light activated riboflavin crosslinking but was not affected by pH. Correlations between rheological parameters and printability showed that the modulus associated with the bioink immediately after extrusion and before deposition was the best predictor of bioink printability. These findings will allow for the more rapid screening of collagen bioink formulations.

  6. PDF -- new peat technology

    Energy Technology Data Exchange (ETDEWEB)

    Myreen, P B

    1982-12-01

    The impact of a large-scale utilization of peat must be assessed in each region separately. As it is completely impractical to transport wet peat over long distances, a PDF plant must be built in the peatland region. Such regions often need economic stimulation. The PDF process can be run independent of season and weather, and thus offers permanent jobs. Dredging the peat layer all at once in a wet state is an operation concentrated on a very small land area. If this area can be drained, it can soon afterwards be forested or used for agricultural purposes. Even if the area from which the peat is removed is left as a wetland, when cleverly done, the ecological effects may be favourable. Peat is a significant energy source in many countries now looking for domestic alternatives to expensive imported fuels. The main constraint on large-scale utilization of peat is its ability to retain moisture. The wet-carbonization process, utilized in a PDF plant and yielding a high-quality peat-derived fuel, is believed to be a technically feasible and economically attractive industrial method of dewatering native peat.

  7. PDF Modeling of Turbulent Combustion

    National Research Council Canada - National Science Library

    Pope, Stephen B

    2006-01-01

    .... The PDF approach to turbulent combustion has the advantages of fully representing the turbulent fluctuations of species and temperature, and of allowing realistic combustion chemistry to be implemented...

  8. Printable photonic crystals with high refractive index for applications in visible light

    International Nuclear Information System (INIS)

    Calafiore, Giuseppe; Mejia, Camilo A; Munechika, Keiko; Peroz, Christophe; Piña-Hernandez, Carlos; Fillot, Quentin; Dhuey, Scott; Sassolini, Simone; Salvadori, Filippo; Cabrini, Stefano

    2016-01-01

    Nanoimprint lithography (NIL) of functional high-refractive index materials has proved to be a powerful candidate for the inexpensive manufacturing of high-resolution photonic devices. In this paper, we demonstrate the fabrication of printable photonic crystals (PhCs) with high refractive index working in the visible wavelengths. The PhCs are replicated on a titanium dioxide-based high-refractive index hybrid material by reverse NIL with almost zero shrinkage and high-fidelity reproducibility between mold and printed devices. The optical responses of the imprinted PhCs compare very well with those fabricated by conventional nanofabrication methods. This study opens the road for a low-cost manufacturing of PhCs and other nanophotonic devices for applications in visible light. (paper)

  9. Post annealing performance evaluation of printable interdigital capacitive sensors by principal component analysis

    KAUST Repository

    Zia, Asif Iqbal

    2015-06-01

    The surface roughness of thin-film gold electrodes induces instability in impedance spectroscopy measurements of capacitive interdigital printable sensors. Post-fabrication thermodynamic annealing was carried out at temperatures ranging from 30 °C to 210 °C in a vacuum oven and the variation in surface morphology of thin-film gold electrodes was observed by scanning electron microscopy. Impedance spectra obtained at different temperatures were translated into equivalent circuit models by applying complex nonlinear least square curve-fitting algorithm. Principal component analysis was applied to deduce the classification of the parameters affected due to the annealing process and to evaluate the performance stability using mathematical model. Physics of the thermodynamic annealing was discussed based on the surface activation energies. The post anneal testing of the sensors validated the achieved stability in impedance measurement. © 2001-2012 IEEE.

  10. An electroluminescence device for printable electronics using coprecipitated ZnS:Mn nanocrystal ink

    International Nuclear Information System (INIS)

    Toyama, T; Hama, T; Adachi, D; Nakashizu, Y; Okamoto, H

    2009-01-01

    Electroluminescence (EL) devices for printable electronics using coprecipitated ZnS:Mn nanocrystal (NC) ink are demonstrated. The EL properties of these devices were investigated along with the structural and optical properties of ZnS:Mn NCs with an emphasis on their dependence on crystal size. Transmission electron microscopy and x-ray diffraction studies revealed that the NCs, with a crystal size of 3-4 nm, are nearly monodisperse; the crystal size can be controlled by the Zn 2+ concentration in the starting solution for coprecipitation. The results of optical studies indicate the presence of quantum confinement effects; in addition, the NC surfaces are well passivated, regardless of the crystal size. Finally, an increase in the luminance of EL devices with a decrease in crystal size is observed, which suggests the excitation mechanism of ZnS:Mn NC EL devices.

  11. Inkjet printable nanosilver suspensions for enhanced sintering quality in rapid manufacturing

    International Nuclear Information System (INIS)

    Bai, John G; Creehan, Kevin D; Kuhn, Howard A

    2007-01-01

    Inkjet printable nanosilver suspensions were prepared by dispersing 30 nm silver particles into a water-based binder system to enhance the sintering quality in rapid manufacturing. During three-dimensional printing (3DP), the nanosilver suspensions were inkjet printed onto repetitively spread microsilver powder for selective joining. Since the nanosilver particles in the suspensions can be sintered at relatively low temperatures to bond the neighbouring microsilver powder, they were used to provide the continuous bonding strength of the manufacturing parts during the heat-up procedure of the sintering operation. Comparative study shows that the silver parts printed using the nanosilver suspension were significantly enhanced in sintering quality than those printed using the binder system, especially when the silver parts had thin or small features with high aspect ratios

  12. EUV actinic defect inspection and defect printability at the sub-32 nm half pitch

    Energy Technology Data Exchange (ETDEWEB)

    Huh, Sungmin; Kearney, Patrick; Wurm, Stefan; Goodwin, Frank; Han, Hakseung; Goldberg, Kenneth; Mochi, Iacopp; Gullikson, Eric M.

    2009-08-01

    Extreme ultraviolet (EUV) mask blanks with embedded phase defects were inspected with a reticle actinic inspection tool (AIT) and the Lasertec M7360. The Lasertec M7360, operated at SEMA TECH's Mask Blank Development Center (MBDC) in Albany, NY, has a sensitivity to multilayer defects down to 40-45 nm, which is not likely sufficient for mask blank development below the 32 nm half-pitch node. Phase defect printability was simulated to calculate the required defect sensitivity for a next generation blank inspection tool to support reticle development for the sub-32 nm half-pitch technology node. Defect mitigation technology is proposed to take advantage of mask blanks with some defects. This technology will reduce the cost of ownership of EUV mask blanks. This paper will also discuss the kind of infrastructure that will be required for the development and mass production stages.

  13. Post annealing performance evaluation of printable interdigital capacitive sensors by principal component analysis

    KAUST Repository

    Zia, Asif Iqbal; Mukhopadhyay, Subhas Chandra; Yu, Paklam; Al-Bahadly, Ibrahim H.; Gooneratne, Chinthaka Pasan; Kosel, Jü rgen

    2015-01-01

    The surface roughness of thin-film gold electrodes induces instability in impedance spectroscopy measurements of capacitive interdigital printable sensors. Post-fabrication thermodynamic annealing was carried out at temperatures ranging from 30 °C to 210 °C in a vacuum oven and the variation in surface morphology of thin-film gold electrodes was observed by scanning electron microscopy. Impedance spectra obtained at different temperatures were translated into equivalent circuit models by applying complex nonlinear least square curve-fitting algorithm. Principal component analysis was applied to deduce the classification of the parameters affected due to the annealing process and to evaluate the performance stability using mathematical model. Physics of the thermodynamic annealing was discussed based on the surface activation energies. The post anneal testing of the sensors validated the achieved stability in impedance measurement. © 2001-2012 IEEE.

  14. Enhanced printability of thermoplastic polyurethane substrates by silica particles surface interactions

    Energy Technology Data Exchange (ETDEWEB)

    Cruz, S., E-mail: s.cruz@dep.uminho.pt [IPC/I3N – Institute of Polymers and Composites/Inst. of Nanostructures, Nanomodelling and Nanofabrication, Department Polymer Engineering, University of Minho, 4804-533 Guimarães (Portugal); Rocha, L.A. [CMEMS, University of Minho, 4804-533 Guimarães (Portugal); Viana, J.C. [IPC/I3N – Institute of Polymers and Composites/Inst. of Nanostructures, Nanomodelling and Nanofabrication, Department Polymer Engineering, University of Minho, 4804-533 Guimarães (Portugal)

    2016-01-01

    Graphical abstract: - Highlights: • A new method development for surface treatment of thermoplastic polyurethane (TPU) substrates. • The proposed method increases TPU surface energy (by 45%) and consequently the TPU wettability. • Great increase of the TPU surface roughness (by 621%). • Inkjet printed conductive ink was applied to the surface treated TPU substrate and significant improvements on the printability were obtained. - Abstract: A new method developed for the surface treatment of thermoplastic polymer substrates that increases their surface energies is introduced in this paper. The method is environmental friendly and low cost. In the proposed surface treatment method, nanoparticles are spread over the thermoplastic polyurethane (TPU) flexible substrate surface and then thermally fixed. This latter step allows the nanoparticles sinking-in on the polymer surface, resulting in a higher polymer–particle interaction at their interfacial region. The addition of nanoparticles onto the polymer surface increases surface roughness. The extent of the nanoparticles dispersion and sink-in in the substrate was evaluated through microscopy analysis (SEM). The roughness of the surface treated polymeric substrate was evaluated by AFM analysis. Substrate critical surface tension (ST) was measured by contact angle. In general, a homogeneous roughness form is achieved to a certain level. Great increase of the TPU surface roughness (by 621%) was induced by the propose method. The proposed surface treatment method increased significantly the substrate ST (by 45%) and consequently the TPU wettability. This novel surface treatment of thermoplastic polymers was applied to the inkjet printing of TPU substrates with conductive inks, and significant improvements on the printability were obtained.

  15. Printability of papers recycled from toner and inkjet-printed papers after deinking and recycling processes.

    Science.gov (United States)

    Karademir, Arif; Aydemir, Cem; Tutak, Dogan; Aravamuthan, Raja

    2018-04-01

    In our contemporary world, while part of the fibers used in the paper industry is obtained from primary fibers such as wood and agricultural plants, the rest is obtained from secondary fibers from waste papers. To manufacture paper with high optical quality from fibers of recycled waste papers, these papers require deinking and bleaching of fibers at desired levels. High efficiency in removal of ink from paper mass during recycling, and hence deinkability, are especially crucial for the optical and printability quality of the ultimate manufactured paper. In the present study, deinkability and printability performance of digitally printed paper with toner or inkjet ink were compared for the postrecycling product. To that end, opaque 80 g/m 2 office paper was digitally printed under standard printing conditions with laser toner or inkjet ink; then these sheets of paper were deinked by a deinking process based on the INGEDE method 11 p. After the deinking operation, the optical properties of the obtained recycled handsheets were compared with unprinted (reference) paper. Then the recycled paper was printed on once again under the same conditions as before with inkjet and laser printers, to monitor and measure printing color change before and after recycling, and differences in color universe. Recycling and printing performances of water-based inkjet and toner-based laser printed paper were obtained. The outcomes for laser-printed recycled paper were better than those for inkjet-printed recycled paper. Compared for luminosity Y, brightness, CIE a* and CIE b* values, paper recycled from laser-printed paper exhibited higher value than paper recycled from inkjet-printed paper.

  16. Study on the flow of molten polymers in a mold an investigation on mold printability; Kobunshi yoyutai no kanagatanai bisho ryudo. Kanagata tenshasei no kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    Kano, Y.; Nishimura, T.; Ito, S. [Ube Industries Ltd. Yamaguchi (Japan)] Usui, H. [Kobe Univ. (Japan)] Saeki, T. [Yamaguchi Univ. (Japan)

    1998-09-15

    A visualization experiment was carried out using a small metal mold with rectangular grooves as a mold printable model to observe the micro-flow of molten polymer in a metal mold. The glitter, which is an index of printability, was correlated with blow velocity and space area. Since it is highly correlated with space area, it can be thought that filling up well the fine grooves of mold heighten the glitter and printability as well. The effect of such factors as mold temperature, polymer melt temperature, air blow pressure and air blow velocity on the mold printability was investigated. For high density polyethylene and polypropylene, the glitter depended the most on the mold temperature. The higher the temperature, the higher the glitter. It was also found that the increase in blow pressure was effective. For high density polyethylene, the effect of blow velocity and polymer melt temperature was also recognized. 3 refs., 6 figs., 3 tabs.

  17. Genetics Home Reference: white sponge nevus

    Science.gov (United States)

    ... Twitter Home Health Conditions White sponge nevus White sponge nevus Printable PDF Open All Close All Enable ... to view the expand/collapse boxes. Description White sponge nevus is a condition characterized by the formation ...

  18. SU-F-T-94: Plan2pdf - a Software Tool for Automatic Plan Report for Philips Pinnacle TPS

    Energy Technology Data Exchange (ETDEWEB)

    Wu, C [Sutter Medical Foundation, Roseville, CA (United States)

    2016-06-15

    Purpose: To implement an automatic electronic PDF plan reporting tool for Philips Pinnacle treatment planning system (TPS) Methods: An electronic treatment plan reporting software is developed by us to enable fully automatic PDF report from Pinnacle TPS to external EMR programs such as MOSAIQ. The tool is named “plan2pdf”. plan2pdf is implemented using Pinnacle scripts, Java and UNIX shell scripts, without any external program needed. plan2pdf supports full auto-mode and manual mode reporting. In full auto-mode, with a single mouse click, plan2pdf will generate a detailed Pinnacle plan report in PDF format, which includes customizable cover page, Pinnacle plan summary, orthogonal views through each plan POI and maximum dose point, DRR for each beam, serial transverse views captured throughout the dose grid at a user specified interval, DVH and scorecard windows. The final PDF report is also automatically bookmarked for each section above for convenient plan review. The final PDF report can either be saved on a user specified folder on Pinnacle, or it can be automatically exported to an EMR import folder via a user configured FTP service. In manual capture mode, plan2pdf allows users to capture any Pinnacle plan by full screen, individual window or rectangular ROI drawn on screen. Furthermore, to avoid possible patients’ plan mix-up during auto-mode reporting, a user conflict check feature is included in plan2pdf: it prompts user to wait if another patient is being exported by plan2pdf by another user. Results: plan2pdf is tested extensively and successfully at our institution consists of 5 centers, 15 dosimetrists and 10 physicists, running Pinnacle version 9.10 on Enterprise servers. Conclusion: plan2pdf provides a highly efficient, user friendly and clinical proven platform for all Philips Pinnacle users, to generate a detailed plan report in PDF format for external EMR systems.

  19. SU-F-T-94: Plan2pdf - a Software Tool for Automatic Plan Report for Philips Pinnacle TPS

    International Nuclear Information System (INIS)

    Wu, C

    2016-01-01

    Purpose: To implement an automatic electronic PDF plan reporting tool for Philips Pinnacle treatment planning system (TPS) Methods: An electronic treatment plan reporting software is developed by us to enable fully automatic PDF report from Pinnacle TPS to external EMR programs such as MOSAIQ. The tool is named “plan2pdf”. plan2pdf is implemented using Pinnacle scripts, Java and UNIX shell scripts, without any external program needed. plan2pdf supports full auto-mode and manual mode reporting. In full auto-mode, with a single mouse click, plan2pdf will generate a detailed Pinnacle plan report in PDF format, which includes customizable cover page, Pinnacle plan summary, orthogonal views through each plan POI and maximum dose point, DRR for each beam, serial transverse views captured throughout the dose grid at a user specified interval, DVH and scorecard windows. The final PDF report is also automatically bookmarked for each section above for convenient plan review. The final PDF report can either be saved on a user specified folder on Pinnacle, or it can be automatically exported to an EMR import folder via a user configured FTP service. In manual capture mode, plan2pdf allows users to capture any Pinnacle plan by full screen, individual window or rectangular ROI drawn on screen. Furthermore, to avoid possible patients’ plan mix-up during auto-mode reporting, a user conflict check feature is included in plan2pdf: it prompts user to wait if another patient is being exported by plan2pdf by another user. Results: plan2pdf is tested extensively and successfully at our institution consists of 5 centers, 15 dosimetrists and 10 physicists, running Pinnacle version 9.10 on Enterprise servers. Conclusion: plan2pdf provides a highly efficient, user friendly and clinical proven platform for all Philips Pinnacle users, to generate a detailed plan report in PDF format for external EMR systems.

  20. Properties and Printability of Inkjet and Screen-Printed Silver Patterns for RFID Antennas

    Science.gov (United States)

    Salmerón, José F.; Molina-Lopez, Francisco; Briand, Danick; Ruan, Jason J.; Rivadeneyra, Almudena; Carvajal, Miguel A.; Capitán-Vallvey, L. F.; de Rooij, Nico F.; Palma, Alberto J.

    2014-02-01

    We report the modeling, and geometrical and electrical characterization, of inkjet and screen-printed patterns on different polymeric substrates for use as antennas in radio-frequency identification (RFID) applications. We compared the physical and electrical characteristics of two silver nanoparticle-based commercial inkjet-printable inks and one screen-printable silver paste, when deposited on polyimide (PI), polyethylene terephthalate (PET), and polyetherimide (PEI) substrates. First, the thickness of the inkjet-printed patterns was predicted by use of an analytical model based on printing conditions and ink composition. The predicted thickness was confirmed experimentally, and geometrical characterization of the lines was completed by measuring the root-mean-square roughness of the patterns. Second, direct-current electrical characterization was performed to identify the printing conditions yielding the lowest resistivity and sheet resistance. The minimum resistivity for the inkjet-printing method was 8.6 ± 0.8 μΩ cm, obtained by printing four stacked layers of one of the commercial inks on PEI, whereas minimum resistivity of 44 ± 7 μΩ cm and 39 ± 4 μΩ cm were obtained for a single layer of screen-printed ink on polyimide (PI) with 140 threads/cm mesh and 90 threads/cm mesh, respectively. In every case, these minimum values of resistivity were obtained for the largest tested thickness. Coplanar waveguide transmission lines were then designed and characterized to analyze the radio-frequency (RF) performance of the printed patterns; minimum transmission losses of 0.0022 ± 0.0012 dB/mm and 0.0016 ± 0.0012 dB/mm measured at 13.56 MHz, in the high-frequency (HF) band, were achieved by inkjet printing on PEI and screen printing on PI, respectively. At 868 MHz, in the ultra-high-frequency band, the minimum values of transmission loss were 0.0130 ± 0.0014 dB/mm for inkjet printing on PEI and 0.0100 ± 0.0014 dB/mm for screen printing on PI. Although the

  1. Printability Study of Bioprinted Tubular Structures Using Liquid Hydrogel Precursors in a Support Bath

    Directory of Open Access Journals (Sweden)

    Houzhu Ding

    2018-03-01

    Full Text Available Microextrusion-based bioprinting within a support bath material is an emerging additive manufacturing paradigm for complex three-dimensional (3D tissue construct fabrication. Although a support bath medium enables arbitrary in-process geometries to be printed, a significant challenge lies in preserving the shape fidelity upon the extraction of the support bath material. Based on the bioprinting in a support bath paradigm, this paper advances quantitative analyses to systematically determine the printability of cell-laden liquid hydrogel precursors towards filament-based tissue constructs. First, a yield stress nanoclay material is judiciously selected as the support bath medium owing to its insensitivity to temperature and ionic variations that are considered in the context of the current gelatin-alginate bio-ink material formulation. Furthermore, phenomenological observations for the rheology-mediated print outcomes enable the compositions for the bio-ink material (10% gelatin, 3% alginate, in tandem with the support bath medium (4% nanoclay, 0.5% CaCl2, to be identified. To systematically evaluate the performance outcomes for bioprinting within a support bath, this paper advances an experimental parametric study to optimize the 3D structural shape fidelity by varying parameters such as the layer height, extrusion flowrate, printing temperature, and printhead speed, towards fabricating complex 3D structures with the stabilization of the desired shape outcome. Specifically, it is found that the layer height and printhead speed are determinant parameters for the extent of successive layer fusion. Moreover, maintenance of an optimal bath temperature is identified as a key parameter for establishing the printability for the hydrogel bio-ink. Studying this effect is enabled by the custom design of a PID temperature control system with integration with the bioprinter for real-time precision control of the support bath temperature. In order to qualify

  2. Pyloro-duodenal hernia with formation of enterocutaneous fistula in ...

    African Journals Online (AJOL)

    Pyloro-duodenal hernia with formation of enterocutaneous fistula in a buffalo calf following a dog attack. ... Frequently Asked Questions about PDFs. Alternatively, you can download the PDF file directly to your computer, from where it can be opened using a PDF reader. To download the PDF, click the Download link above.

  3. Synthesis of silicon nanocomposite for printable photovoltaic devices on flexible substrate

    Science.gov (United States)

    Odo, E. A.; Faremi, A. A.

    2017-06-01

    Renewed interest has been established in the preparation of silicon nanoparticles for electronic device applications. In this work, we report on the production of silicon powders using a simple ball mill and of silicon nanocomposite ink for screen-printable photovoltaic device on a flexible substrate. Bulk single crystalline silicon was milled for 25 h in the ball mill. The structural properties of the produced silicon nanoparticles were investigated using X-ray diffraction (XRD) and transmission electron microscopy. The results show that the particles remained highly crystalline, though transformed from their original single crystalline state to polycrystalline. The elemental composition using energy dispersive X-ray florescence spectroscopy (EDXRF) revealed that contamination from iron (Fe) and chromium (Cr) of the milling media and oxygen from the atmosphere were insignificant. The size distribution of the nanoparticles follows a lognormal pattern that ranges from 60 nm to about 1.2 μm and a mean particle size of about 103 nm. Electrical characterization of screen-printed PN structures of the nanocomposite formed by embedding the powder into a suitable water-soluble polymer on Kapton sheet reveals an enhanced photocurrent transport resulting from photo-induced carrier generation in the depletion region with energy greater that the Schottky barrier height at the metal-composite interface.

  4. Printable polymer actuators from ionic liquid, soluble polyimide, and ubiquitous carbon materials.

    Science.gov (United States)

    Imaizumi, Satoru; Ohtsuki, Yuto; Yasuda, Tomohiro; Kokubo, Hisashi; Watanabe, Masayoshi

    2013-07-10

    We present here printable high-performance polymer actuators comprising ionic liquid (IL), soluble polyimide, and ubiquitous carbon materials. Polymer electrolytes with high ionic conductivity and reliable mechanical strength are required for high-performance polymer actuators. The developed polymer electrolytes comprised a soluble sulfonated polyimide (SPI) and IL, 1-ethyl-3-methylimidazolium bis(trifluoromethanesulfonyl)amide ([C2mim][NTf2]), and they exhibited acceptable ionic conductivity up to 1 × 10(-3) S cm(-1) and favorable mechanical properties (elastic modulus >1 × 10(7) Pa). Polymer actuators based on SPI/[C2mim][NTf2] electrolytes were prepared using inexpensive activated carbon (AC) together with highly electron-conducting carbon such as acetylene black (AB), vapor grown carbon fiber (VGCF), and Ketjen black (KB). The resulting polymer actuators have a trilaminar electric double-layer capacitor structure, consisting of a polymer electrolyte layer sandwiched between carbon electrode layers. Displacement, response speed, and durability of the actuators depended on the combination of carbons. Especially the actuators with mixed AC/KB carbon electrodes exhibited relatively large displacement and high-speed response, and they kept 80% of the initial displacement even after more than 5000 cycles. The generated force of the actuators correlated with the elastic modulus of SPI/[C2mim][NTf2] electrolytes. The displacement of the actuators was proportional to the accumulated electric charge in the electrodes, regardless of carbon materials, and agreed well with the previously proposed displacement model.

  5. Fluoropolymer based composite with Ag particles as 3D printable conductive ink for stretchable electronics

    Science.gov (United States)

    Kumar, Amit; La, Thanh Giang; Li, Xinda; Chung, Hyun Joong

    The recent development of stretchable electronics expands the scope of wearable and healthcare applications. This creates a high demand in stretchy conductor that can maintain conductivity at high strain conditions. Here, we describe a simple fabrication pathway to achieve stretchable, 3D-printable and low-cost conductive composite ink. The ink is used to print complex stretchable patterns with high conductivity. The elastic ink is composed of silver(Ag) flakes, fluorine rubber, an organic solvent and surfactant. The surfactant plays multiple roles in in the composite. The surfactant promotes compatibility between silver flakes and fluorine rubber; at the same time, it affects the mechanical properties of the hosting fluoropolymers and adhesion properties of the composite. Based on experimental observations, we discuss the exact role of the surfactant in the composite. The resulting composite exhibits high conductivity value of 8.49 *10 4 S/m along with high reliability against repeated stretching/releasing cycles. Interesting examples of transfer printing of the printed ink and its applications in working devices, such as RFID tag and antennas, are also showcased.

  6. Directly Printable Flexible Strain Sensors for Bending and Contact Feedback of Soft Actuators

    Directory of Open Access Journals (Sweden)

    Khaled Elgeneidy

    2018-02-01

    Full Text Available This paper presents a fully printable sensorized bending actuator that can be calibrated to provide reliable bending feedback and simple contact detection. A soft bending actuator following a pleated morphology, as well as a flexible resistive strain sensor, were directly 3D printed using easily accessible FDM printer hardware with a dual-extrusion tool head. The flexible sensor was directly welded to the bending actuator’s body and systematically tested to characterize and evaluate its response under variable input pressure. A signal conditioning circuit was developed to enhance the quality of the sensory feedback, and flexible conductive threads were used for wiring. The sensorized actuator’s response was then calibrated using a vision system to convert the sensory readings to real bending angle values. The empirical relationship was derived using linear regression and validated at untrained input conditions to evaluate its accuracy. Furthermore, the sensorized actuator was tested in a constrained setup that prevents bending, to evaluate the potential of using the same sensor for simple contact detection by comparing the constrained and free-bending responses at the same input pressures. The results of this work demonstrated how a dual-extrusion FDM printing process can be tuned to directly print highly customizable flexible strain sensors that were able to provide reliable bending feedback and basic contact detection. The addition of such sensing capability to bending actuators enhances their functionality and reliability for applications such as controlled soft grasping, flexible wearables, and haptic devices.

  7. Precisely printable and biocompatible silk fibroin bioink for digital light processing 3D printing.

    Science.gov (United States)

    Kim, Soon Hee; Yeon, Yeung Kyu; Lee, Jung Min; Chao, Janet Ren; Lee, Young Jin; Seo, Ye Been; Sultan, Md Tipu; Lee, Ok Joo; Lee, Ji Seung; Yoon, Sung-Il; Hong, In-Sun; Khang, Gilson; Lee, Sang Jin; Yoo, James J; Park, Chan Hum

    2018-04-24

    Although three-dimensional (3D) bioprinting technology has gained much attention in the field of tissue engineering, there are still several significant engineering challenges to overcome, including lack of bioink with biocompatibility and printability. Here, we show a bioink created from silk fibroin (SF) for digital light processing (DLP) 3D bioprinting in tissue engineering applications. The SF-based bioink (Sil-MA) was produced by a methacrylation process using glycidyl methacrylate (GMA) during the fabrication of SF solution. The mechanical and rheological properties of Sil-MA hydrogel proved to be outstanding in experimental testing and can be modulated by varying the Sil-MA contents. This Sil-MA bioink allowed us to build highly complex organ structures, including the heart, vessel, brain, trachea and ear with excellent structural stability and reliable biocompatibility. Sil-MA bioink is well-suited for use in DLP printing process and could be applied to tissue and organ engineering depending on the specific biological requirements.

  8. Printable Electrochemical Biosensors: A Focus on Screen-Printed Electrodes and Their Application

    Directory of Open Access Journals (Sweden)

    Keiichiro Yamanaka

    2016-10-01

    Full Text Available In this review we present electrochemical biosensor developments, focusing on screen-printed electrodes (SPEs and their applications. In particular, we discuss how SPEs enable simple integration, and the portability needed for on-field applications. First, we briefly discuss the general concept of biosensors and quickly move on to electrochemical biosensors. Drawing from research undertaken in this area, we cover the development of electrochemical DNA biosensors in great detail. Through specific examples, we describe the fabrication and surface modification of printed electrodes for sensitive and selective detection of targeted DNA sequences, as well as integration with reverse transcription-polymerase chain reaction (RT-PCR. For a more rounded approach, we also touch on electrochemical immunosensors and enzyme-based biosensors. Last, we present some electrochemical devices specifically developed for use with SPEs, including USB-powered compact mini potentiostat. The coupling demonstrates the practical use of printable electrode technologies for application at point-of-use. Although tremendous advances have indeed been made in this area, a few challenges remain. One of the main challenges is application of these technologies for on-field analysis, which involves complicated sample matrices.

  9. Chronic Obstructive Pulmonary Disease (COPD): Data and Statistics

    Science.gov (United States)

    ... and Statistics Recommend on Facebook Tweet Share Compartir COPD Death Rates in the United States Printable Version [ ... Ohio and Mississippi Rivers. Printable Version [PDF 733KB] COPD Prevalence in the United States Printable Version [PDF ...

  10. The Use of PDF/A in Digital Archives: A Case Study from Archaeology

    Directory of Open Access Journals (Sweden)

    Tim N. L. Evans

    2014-10-01

    Full Text Available In recent years the Portable Document Format (PDF has become a ubiquitous format in the exchange of documents; in 2005 the PDF/A profile was defined in order to meet long term accessibility needs, and has accordingly come to be regarded as a long-term archiving strategy for PDF files. In the field of archaeology, a growing number of PDF files – containing the detailed results of fieldwork and research – are beginning to be deposited with digital archives such as the Archaeology Data Service (ADS. In the ADS’ experience, the use of PDF/A has had benefits as well as drawbacks: the majority of PDF reports are now in a standard format better suited to longer-term access, however migrating to PDF/A and managing and ensuring reuse of these files is intensive, and fraught with potential pitfalls. Of these, perhaps the most serious has been an unreliability in PDF/A conformance by the wide range of tools and software now available. There are also practical and more theoretical implications for reuse which, as our discipline of archaeology alongside so many others rapidly becomes digitized, presents us with a large corpus of ‘data’ that is human readable, but may not be amenable to machine-based technologies such as NLP. It may be argued that these factors effectively undermine some of the perceived cost benefit of moving from paper to digital, as well as the longer-term sustainability of PDF/A within digital archives.

  11. TouchTerrain: A simple web-tool for creating 3D-printable topographic models

    Science.gov (United States)

    Hasiuk, Franciszek J.; Harding, Chris; Renner, Alex Raymond; Winer, Eliot

    2017-12-01

    An open-source web-application, TouchTerrain, was developed to simplify the production of 3D-printable terrain models. Direct Digital Manufacturing (DDM) using 3D Printers can change how geoscientists, students, and stakeholders interact with 3D data, with the potential to improve geoscience communication and environmental literacy. No other manufacturing technology can convert digital data into tangible objects quickly at relatively low cost; however, the expertise necessary to produce a 3D-printed terrain model can be a substantial burden: knowledge of geographical information systems, computer aided design (CAD) software, and 3D printers may all be required. Furthermore, printing models larger than the build volume of a 3D printer can pose further technical hurdles. The TouchTerrain web-application simplifies DDM for elevation data by generating digital 3D models customized for a specific 3D printer's capabilities. The only required user input is the selection of a region-of-interest using the provided web-application with a Google Maps-style interface. Publically available digital elevation data is processed via the Google Earth Engine API. To allow the manufacture of 3D terrain models larger than a 3D printer's build volume the selected area can be split into multiple tiles without third-party software. This application significantly reduces the time and effort required for a non-expert like an educator to obtain 3D terrain models for use in class. The web application is deployed at http://touchterrain.geol.iastate.edu/

  12. Printable organometallic perovskite enables large-area, low-dose X-ray imaging

    Science.gov (United States)

    Kim, Yong Churl; Kim, Kwang Hee; Son, Dae-Yong; Jeong, Dong-Nyuk; Seo, Ja-Young; Choi, Yeong Suk; Han, In Taek; Lee, Sang Yoon; Park, Nam-Gyu

    2017-10-01

    Medical X-ray imaging procedures require digital flat detectors operating at low doses to reduce radiation health risks. Solution-processed organic-inorganic hybrid perovskites have characteristics that make them good candidates for the photoconductive layer of such sensitive detectors. However, such detectors have not yet been built on thin-film transistor arrays because it has been difficult to prepare thick perovskite films (more than a few hundred micrometres) over large areas (a detector is typically 50 centimetres by 50 centimetres). We report here an all-solution-based (in contrast to conventional vacuum processing) synthetic route to producing printable polycrystalline perovskites with sharply faceted large grains having morphologies and optoelectronic properties comparable to those of single crystals. High sensitivities of up to 11 microcoulombs per air KERMA of milligray per square centimetre (μC mGyair-1 cm-2) are achieved under irradiation with a 100-kilovolt bremsstrahlung source, which are at least one order of magnitude higher than the sensitivities achieved with currently used amorphous selenium or thallium-doped cesium iodide detectors. We demonstrate X-ray imaging in a conventional thin-film transistor substrate by embedding an 830-micrometre-thick perovskite film and an additional two interlayers of polymer/perovskite composites to provide conformal interfaces between perovskite films and electrodes that control dark currents and temporal charge carrier transportation. Such an all-solution-based perovskite detector could enable low-dose X-ray imaging, and could also be used in photoconductive devices for radiation imaging, sensing and energy harvesting.

  13. Printable organometallic perovskite enables large-area, low-dose X-ray imaging.

    Science.gov (United States)

    Kim, Yong Churl; Kim, Kwang Hee; Son, Dae-Yong; Jeong, Dong-Nyuk; Seo, Ja-Young; Choi, Yeong Suk; Han, In Taek; Lee, Sang Yoon; Park, Nam-Gyu

    2017-10-04

    Medical X-ray imaging procedures require digital flat detectors operating at low doses to reduce radiation health risks. Solution-processed organic-inorganic hybrid perovskites have characteristics that make them good candidates for the photoconductive layer of such sensitive detectors. However, such detectors have not yet been built on thin-film transistor arrays because it has been difficult to prepare thick perovskite films (more than a few hundred micrometres) over large areas (a detector is typically 50 centimetres by 50 centimetres). We report here an all-solution-based (in contrast to conventional vacuum processing) synthetic route to producing printable polycrystalline perovskites with sharply faceted large grains having morphologies and optoelectronic properties comparable to those of single crystals. High sensitivities of up to 11 microcoulombs per air KERMA of milligray per square centimetre (μC mGy air -1 cm -2 ) are achieved under irradiation with a 100-kilovolt bremsstrahlung source, which are at least one order of magnitude higher than the sensitivities achieved with currently used amorphous selenium or thallium-doped cesium iodide detectors. We demonstrate X-ray imaging in a conventional thin-film transistor substrate by embedding an 830-micrometre-thick perovskite film and an additional two interlayers of polymer/perovskite composites to provide conformal interfaces between perovskite films and electrodes that control dark currents and temporal charge carrier transportation. Such an all-solution-based perovskite detector could enable low-dose X-ray imaging, and could also be used in photoconductive devices for radiation imaging, sensing and energy harvesting.

  14. The influence of printing parameters on cell survival rate and printability in microextrusion-based 3D cell printing technology.

    Science.gov (United States)

    Zhao, Yu; Li, Yang; Mao, Shuangshuang; Sun, Wei; Yao, Rui

    2015-11-02

    Three-dimensional (3D) cell printing technology has provided a versatile methodology to fabricate cell-laden tissue-like constructs and in vitro tissue/pathological models for tissue engineering, drug testing and screening applications. However, it still remains a challenge to print bioinks with high viscoelasticity to achieve long-term stable structure and maintain high cell survival rate after printing at the same time. In this study, we systematically investigated the influence of 3D cell printing parameters, i.e. composition and concentration of bioink, holding temperature and holding time, on the printability and cell survival rate in microextrusion-based 3D cell printing technology. Rheological measurements were utilized to characterize the viscoelasticity of gelatin-based bioinks. Results demonstrated that the bioink viscoelasticity was increased when increasing the bioink concentration, increasing holding time and decreasing holding temperature below gelation temperature. The decline of cell survival rate after 3D cell printing process was observed when increasing the viscoelasticity of the gelatin-based bioinks. However, different process parameter combinations would result in the similar rheological characteristics and thus showed similar cell survival rate after 3D bioprinting process. On the other hand, bioink viscoelasticity should also reach a certain point to ensure good printability and shape fidelity. At last, we proposed a protocol for 3D bioprinting of temperature-sensitive gelatin-based hydrogel bioinks with both high cell survival rate and good printability. This research would be useful for biofabrication researchers to adjust the 3D bioprinting process parameters quickly and as a referable template for designing new bioinks.

  15. Download this PDF file

    African Journals Online (AJOL)

    user

    particularly addresses computer crime. 6 ... Hence, the other crimes in terms of ... by way of questionnaires and are available in binary column electronic format ..... Agreement on Trade-Related Aspects of Intellectual Property Rights (TRIPS) ...

  16. to view fulltext PDF

    Indian Academy of Sciences (India)

    Biological productivity, terrigenous influence and noncrustal ... Impact of bogus vortex for track and intensity pre- diction of ... Interrelationship between cloud cover and sensible ... Climate. Climatic control on clay mineral formation: Evidence.

  17. Download this PDF file

    African Journals Online (AJOL)

    USER

    The target population were 200 students, which were purposively .... information can be in paper or in electronic format .... Engineering (CSE). ... bound journals) and browsing new titles of library ... To search materials for thesis\\project.

  18. Download this PDF file

    African Journals Online (AJOL)

    Jane

    2011-08-15

    Aug 15, 2011 ... formation, aedeagus enters into female corpus bursa and endophallus enters ... Eupryene spermatozoa are nucleated and can fertilize the eggs, ... cantly reduced fecundity and fertility of subsequent adults and hatchability of ...

  19. Download this PDF file

    African Journals Online (AJOL)

    FIRST LADY

    performance of the formative feedback group in the second test, but the increase in ... processes. It affects how much stress and depression people experience in ... Perceived academic self-efficacy is defined as the personal judgment of one's.

  20. Download this PDF file

    African Journals Online (AJOL)

    pc

    2017-11-24

    Nov 24, 2017 ... ... Kebangsaan Malaysia, School of Environmental Science and Natural Resources ... The best spot for recreational activities is at the fast-flowing stream, .... in the formation of EPT habitat and niche, as they use it to trap food.

  1. Download this PDF file

    African Journals Online (AJOL)

    2008-08-01

    Aug 1, 2008 ... Abstract. Phenol is a pollutant found in many industrial wastewaters, which diminishes biogas formation in ... This system enhances biogas production and allows ... tion of fatty acids, hydrogen and thus methane (Fedorak and.

  2. to view fulltext PDF

    Indian Academy of Sciences (India)

    surface water resources. Therefore, all the water dependent activities depend on groundwater resources. .... trichtian to Eocene age and is divided into three formations as ..... Attention by the authorities has been given lately to the question of ...

  3. Download this PDF file

    African Journals Online (AJOL)

    Over the repeated use of injections carries the risk of abscess formation and transmission of fetal infections. WORDS: base line survey, drug prescribing indicators, out patients. FMOT. KEY WORDS: bas. School of Phar ol of Pharmacy, Jimma ...

  4. Download this PDF file

    African Journals Online (AJOL)

    mcbee

    2001-10-01

    Oct 1, 2001 ... Thorough analyses of the findings, from a synergy of creative artistic attributes ... and other researchers in Art and leadership studies. ... tration on a few important items. ... ize ideas and translate them into discernable formats.

  5. Download this PDF file

    African Journals Online (AJOL)

    important to ensure good-quality reflection on experiences where students articulately ... The usefulness of a tool to assess reflection in a service-learning experience ..... final mark for practical work, and could also contribute towards formative.

  6. Download this PDF file

    African Journals Online (AJOL)

    monitoring of assessment results and student academic support and development ... Over a number of years, the focus of the LDP for UFS medical students has been on ..... A remedial intervention linked to a formative assessment is effective ...

  7. Download this PDF file

    African Journals Online (AJOL)

    Elamin

    274-7. 14. Wright RS, Quinones-Baldrich WJ, Anders AJ,. Danovitch GM. Pleural effusion associated withipsilateral breast and arm edema as a complication of subclavian vein catheterization and arteriovenous fistula formation for hemodialysis.

  8. New frontiers in PDF determination

    CERN Multimedia

    CERN. Geneva

    2016-01-01

    Parton Distribution Functions (PDFs) are a crucial input at the LHC, their uncertainty often being the limiting factor in the accuracy of theoretical predictions. At the same time the LHC is delivering a number of precise measurements that have the potential to greatly constrain these functions. I will give an overview on the theory behind and on the state of the art of PDF determination. I will then mention the new theoretical and methodological challenges in modern PDF fits and explore the precision frontiers opened by the accuracy of the LHC data.

  9. Printable Fabrication of Nanocoral-Structured Electrodes for High-Performance Flexible and Planar Supercapacitor with Artistic Design.

    Science.gov (United States)

    Lin, Yuanjing; Gao, Yuan; Fan, Zhiyong

    2017-11-01

    Planar supercapacitors with high flexibility, desirable operation safety, and high performance are considered as attractive candidates to serve as energy-storage devices for portable and wearable electronics. Here, a scalable and printable technique is adopted to construct novel and unique hierarchical nanocoral structures as the interdigitated electrodes on flexible substrates. The as-fabricated flexible all-solid-state planar supercapacitors with nanocoral structures achieve areal capacitance up to 52.9 mF cm -2 , which is 2.5 times that of devices without nanocoral structures, and this figure-of-merit is among the highest in the literature for the same category of devices. More interestingly, due to utilization of the inkjet-printing technique, excellent versatility on electrode-pattern artistic design is achieved. Particularly, working supercapacitors with artistically designed patterns are demonstrated. Meanwhile, the high scalability of such a printable method is also demonstrated by fabrication of large-sized artistic supercapacitors serving as energy-storage devices in a wearable self-powered system as a proof of concept. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  10. Qualitative XRD - use of the PDF for beginners and the evolution of the ICDD

    International Nuclear Information System (INIS)

    Hubbard, C.R.

    2002-01-01

    Full text: The Powder Diffraction File (PDF), published by the International Centre for Diffraction Data (ICDD), has traditionally been used for phase identification by x-ray diffraction methods and is widely used in establishing the phases present in reaction, corrosion and decomposition products in fields including mineralogy, materials science, manufacturing and pharmaceuticals. The X-ray diffraction reference patterns of the PDF have been collected and edited by the non profit organization known today as the International Centre for Diffraction Data (ICDD). Recent activities by the ICDD have greatly enhanced the PDF based on collaboration with structural data centers, expanding the pattern producing Grants-in-Aid program, and focussing efforts of task groups of the ICDD Technical Committee. The currently evolving needs of combinatorial scientists, pharmaceutical laboratories, and computational materials science will impact the PDF in coming years. One opportunity is for greater cross-linking of characterization and property databases and the efforts to explore this future will be discussed. This presentation will survey the evolution of the organization and the PDF emphasizing the more recent changes, summarize the contents of the PDF, present highlights of how to use the powder diffraction file for phase identification, and highlight advantages of the forthcoming relational database format for the PDF. Copyright (2002) Australian X-ray Analytical Association Inc

  11. Download this PDF file

    African Journals Online (AJOL)

    User

    homologous but the most important aspect of blood transfusion is safety. It is pertinent to note that “unsafe blood transfusion” can be more dangerous than no blood at all . The discovery of blood type and method of preventing coagulation allowed the development of homologous blood transfusion and the formation.

  12. Download this PDF file

    African Journals Online (AJOL)

    ADOWIE PERE

    Initial reference volume pressure for Boyle's law grain volume (psig). Bo= Oil formation ..... Sor (Volumetric balance). Voi, Vop, Vp. (. ) p op oi oi ... 1989): Computed Variables. Derived Uncertainties Equation. 1. Basics Properties. - Pore Volume (Vp). VP (saturation). VP (Boyle's Law). VP (Difference). 2. 1. 2. 2. 2. P. P. V. V.

  13. Download this PDF file

    African Journals Online (AJOL)

    USER

    FORMATION OF ADVANCED GLYCATED END PRODUCTS IN RAT BRAIN. ... groups III-V were treated daily with whey protein (1g/kg b.w) or Brassicaceae extract (1mg/kg b.w) or combined ... Serum tumor necrosis factor (TNF-α) and ... Signal transduction is involved in cell function [Agrawal etal., 2005], development [etal.

  14. to view fulltext PDF

    Indian Academy of Sciences (India)

    2015-04-20

    Apr 20, 2015 ... 1999). As carbonylation results .... ifies the charge-selective filtration properties of the basement membrane .... experimental diabetes in animal models (Yamagishi et al. 2005). ..... Taga Y and Akalin S 2006 Effects of ACE inhibition and ...... vent the formation of advanced glycation endproducts. Arch.

  15. Download this PDF file

    African Journals Online (AJOL)

    Information Impact | Journal of Information and Knowledge Management

    Information Impact | Journal of Information and Knowledge Management. 1 ... resources in different formats and in various fields of human knowledge and to process, .... the importance of the Internet, academic institutions in Nigeria are now spending a ..... Retaining talent and understanding work values: Indian experience.

  16. Download this PDF file

    African Journals Online (AJOL)

    Prof Ezechukwu

    2012-03-07

    Mar 7, 2012 ... caudal ends which later fuses during cranial elongation of the embryo. 6 Finally, the theory of errors of epithelial recanalization that allow formation of cysts located in- tramural this would explain the presence of small sub mucosal duplications.2, 6. Despite these theories the exact etiology of ED has not.

  17. Download this PDF file

    African Journals Online (AJOL)

    2015-06-04

    Jun 4, 2015 ... smart phone or mobile device ... on the formation of the BMC is silent on the impact that the .... the BMC sought to address the mental state of the oppressed ... contribution towards the development of black South African ministers ... children is conclusive. .... designation 'black' was viewed in a negative light.

  18. Download this PDF file

    African Journals Online (AJOL)

    DR. MIKE HORSFALL

    ABSTRACT: The elements of water budget equation were analyzed for the Agulu lake area and underlying aquifers. The water budget implications for soil and gully erosion were evaluated in relation to the geological formations and hydrogeotechnics. Results show that rainfall constitutes the main source of precipitation.

  19. Download this PDF file

    African Journals Online (AJOL)

    Dr Olaleye

    is continuously formed within the mitochondria. The rate of formation depends on the amount of oxygen flowing through the mitochondria at any given time. Hydrogen peroxide produced in vivo can either be converted ...... Role of oxidant species in aging. Curr Med. Chem.; 11:1105–1112. Tapiero H., Townsend D. Tew K ...

  20. Download this PDF file

    African Journals Online (AJOL)

    dell

    These catalyst were phosphoric acid, 1,2,4-benzene tricarboxylic acid and succinic acid. The new compounds were ... benzene tricarboxylic acid, characterization of alkyd resin properties ... polymerization reaction between three kinds ... leads to the formation of polymer chain to ... and experimental methods, which can be.

  1. Download this PDF file

    African Journals Online (AJOL)

    collision models, between the Congo Craton and an active continental block in the .... Description of the Bouguer anomaly ... dients, which occur over these basic intrusive rocks, ... Profile B: Fig. 5 a: Residual Anomaly Profile. African Formations; 5: gneiss forma- ..... wedged against the Pan African plate (Kennedy, 1964).

  2. Download this PDF file

    African Journals Online (AJOL)

    abp

    1Department of Radiology, CHU Hassan II, Fez, Morrocco, 2Department of Pediatric Surgey, CHU Hassan II, Fez, Morrocco. &Corresponding author: ... Sclerotic rims with periosteal new bone formation are common. The radiographic ... Imaging: In radiography, the appearance was typical with the presence of a lesion lytic ...

  3. Download this PDF file

    African Journals Online (AJOL)

    Nubidga

    of this new area of knowledge is to explain the formation of a large ... answer the above question by policy makers in different rapidly .... extension to the roads such as payment of fines for poor parking .... implication of taxes on substitute goods in terms of consumers ... of transport choice and location decision of firms. τ* τ*τ* ...

  4. Download this PDF file

    African Journals Online (AJOL)

    ZINOX

    fist in corporal punishment is a common practice in. Nigeria. Alternative methods of punishment such as kneeling down, “frog jump” or “picking pin” have been suggested in other studies . It is worrisome that hyphema occurred in school pupils and students. (28.4%) who are in their formative period of life, in this study.

  5. Download this PDF file

    African Journals Online (AJOL)

    Formative assessment, through the provision of feedback and debriefing in the simulated ... depends upon effective teaching, assessment and feedback[9] in the CSL setting. These skills are .... The research design involved mixing both ..... assessment. Moreover, establishing an instructional system and revising the clinical.

  6. Download this PDF file

    African Journals Online (AJOL)

    and its formation is mainly due to the electrostatic interaction, together with ... the design of novel ligands that interact with proteins in a very specific way ... to identify the local minima structures on the potential energy surfaces and ..... Voth, A.R.; Hays, F.A.; Ho, P.S. Directing macromolecular conformation through halogen.

  7. Download this PDF file

    African Journals Online (AJOL)

    user

    secondary bacterial infection and stone formation. (Figures 1, 2, 3). Anuria5 results ... 3d. Figure 2. Plain pelvic X-ray film of a 23 year old female with anuria. Secondary bilateral ... allows excision with adequate safety margin, and the rest of the ...

  8. Extra dimensions: 3d and time in pdf documentation

    Energy Technology Data Exchange (ETDEWEB)

    Graf, N A [Stanford Linear Accelerator Center, Menlo Park, CA, 94025 (United States)], E-mail: Norman.Graf@slac.stanford.edu

    2008-07-15

    High energy physics is replete with multi-dimensional information which is often poorly represented by the two dimensions of presentation slides and print media. Past efforts to disseminate such information to a wider audience have failed for a number of reasons, including a lack of standards which are easy to implement and have broad support. Adobe's Portable Document Format (PDF) has in recent years become the de facto standard for secure, dependable electronic information exchange. It has done so by creating an open format, providing support for multiple platforms and being reliable and extensible. By providing support for the ECMA standard Universal 3D (U3D) file format in its free Adobe Reader software, Adobe has made it easy to distribute and interact with 3D content. By providing support for scripting and animation, temporal data can also be easily distributed to a wide audience. In this talk, we present examples of HEP applications which take advantage of this functionality. We demonstrate how 3D detector elements can be documented, using either CAD drawings or other sources such as GEANT visualizations as input. Using this technique, higher dimensional data, such as LEGO plots or time-dependent information can be included in PDF files. In principle, a complete event display, with full interactivity, can be incorporated into a PDF file. This would allow the end user not only to customize the view and representation of the data, but to access the underlying data itself.

  9. Extra dimensions: 3d and time in pdf documentation

    International Nuclear Information System (INIS)

    Graf, N A

    2008-01-01

    High energy physics is replete with multi-dimensional information which is often poorly represented by the two dimensions of presentation slides and print media. Past efforts to disseminate such information to a wider audience have failed for a number of reasons, including a lack of standards which are easy to implement and have broad support. Adobe's Portable Document Format (PDF) has in recent years become the de facto standard for secure, dependable electronic information exchange. It has done so by creating an open format, providing support for multiple platforms and being reliable and extensible. By providing support for the ECMA standard Universal 3D (U3D) file format in its free Adobe Reader software, Adobe has made it easy to distribute and interact with 3D content. By providing support for scripting and animation, temporal data can also be easily distributed to a wide audience. In this talk, we present examples of HEP applications which take advantage of this functionality. We demonstrate how 3D detector elements can be documented, using either CAD drawings or other sources such as GEANT visualizations as input. Using this technique, higher dimensional data, such as LEGO plots or time-dependent information can be included in PDF files. In principle, a complete event display, with full interactivity, can be incorporated into a PDF file. This would allow the end user not only to customize the view and representation of the data, but to access the underlying data itself

  10. Manufacture and demonstration of organic photovoltaic-powered electrochromic displays using roll coating methods and printable electrolytes

    DEFF Research Database (Denmark)

    Jensen, Jacob; Dam, Henrik Friis; Reynolds, John R.

    2012-01-01

    active material (ECP-Magenta) and poly(N-octadecyl-(propylene-1,3-dioxy)-3,4-pyrrole-2,5-diyl) as a minimally colored, charge balancing material (MCCP). Two electrolyte systems were compared to allow development of fully printable and laminated devices on flexible substrates. Devices of various sizes, up...... to 7 × 8 cm2, are demonstrated with pixelated devices containing pixel sizes of 4 × 4 mm2 or 13 × 13 mm2. The transmission contrast exhibited by the devices, when switched between the fully bleached and fully colored state, was 58% at a visible wavelength of 550 nm, and the devices exhibited switching...... times of photovoltaic devices (with or without the use of a lithium-polymer battery) to power the devices between the colored and bleached state, illustrating a self-powered ECD. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B...

  11. Printable, Degradable, and Biocompatible Ion Gels from a Renewable ABA Triblock Polyester and a Low Toxicity Ionic Liquid

    Energy Technology Data Exchange (ETDEWEB)

    Tang, Boxin; Schneiderman, Deborah K.; Bidoky, Fazel Zare; Frisbie, C.Daniel; Lodge, Timothy P. (UMM)

    2017-09-15

    We have designed printable, biocompatible, and degradable ion gels by combining a novel ABA triblock aliphatic polyester, poly(ε-decalactone)-b-poly(dl-lactide)-b-poly(ε-decalactone), and a low toxicity ionic liquid, 1-butyl-1-methylpyrrolidinium bistrifluoromethanesulfonylimide ([P14][TFSI]). Due to the favorable compatibility between amorphous poly(dl-lactide) and [P14][TFSI] and the insolubility of the poly(ε-decalactone), the triblock polymer forms self-assembled micellar cross-links similar to thermoplastic elastomers, which ensures similar processing conditions and mechanical robustness during the fabrication of printed electrolyte-gated organic transistor devices. Additionally, the ester backbone in the polymer structure enables efficient hydrolytic degradation of these ion gels compared to those made previously using carbon-backbone polymers.

  12. New Tools to Convert PDF Math Contents into Accessible e-Books Efficiently.

    Science.gov (United States)

    Suzuki, Masakazu; Terada, Yugo; Kanahori, Toshihiro; Yamaguchi, Katsuhito

    2015-01-01

    New features in our math-OCR software to convert PDF math contents into accessible e-books are shown. A method for recognizing PDF is thoroughly improved. In addition, contents in any selected area including math formulas in a PDF file can be cut and pasted into a document in various accessible formats, which is automatically recognized and converted into texts and accessible math formulas through this process. Combining it with our authoring tool for a technical document, one can easily produce accessible e-books in various formats such as DAISY, accessible EPUB3, DAISY-like HTML5, Microsoft Word with math objects and so on. Those contents are useful for various print-disabled students ranging from the blind to the dyslexic.

  13. ChemEngine: harvesting 3D chemical structures of supplementary data from PDF files.

    Science.gov (United States)

    Karthikeyan, Muthukumarasamy; Vyas, Renu

    2016-01-01

    Digital access to chemical journals resulted in a vast array of molecular information that is now available in the supplementary material files in PDF format. However, extracting this molecular information, generally from a PDF document format is a daunting task. Here we present an approach to harvest 3D molecular data from the supporting information of scientific research articles that are normally available from publisher's resources. In order to demonstrate the feasibility of extracting truly computable molecules from PDF file formats in a fast and efficient manner, we have developed a Java based application, namely ChemEngine. This program recognizes textual patterns from the supplementary data and generates standard molecular structure data (bond matrix, atomic coordinates) that can be subjected to a multitude of computational processes automatically. The methodology has been demonstrated via several case studies on different formats of coordinates data stored in supplementary information files, wherein ChemEngine selectively harvested the atomic coordinates and interpreted them as molecules with high accuracy. The reusability of extracted molecular coordinate data was demonstrated by computing Single Point Energies that were in close agreement with the original computed data provided with the articles. It is envisaged that the methodology will enable large scale conversion of molecular information from supplementary files available in the PDF format into a collection of ready- to- compute molecular data to create an automated workflow for advanced computational processes. Software along with source codes and instructions available at https://sourceforge.net/projects/chemengine/files/?source=navbar.Graphical abstract.

  14. Direct photon production and PDF fits reloaded

    NARCIS (Netherlands)

    Campbell, John M.; Rojo, Juan; Slade, Emma; Williams, Ciaran

    2018-01-01

    Direct photon production in hadronic collisions provides a handle on the gluon PDF by means of the QCD Compton scattering process. In this work we revisit the impact of direct photon production on a global PDF analysis, motivated by the recent availability of the next-to-next-to-leading (NNLO)

  15. PDF turbulence modeling and DNS

    Science.gov (United States)

    Hsu, A. T.

    1992-01-01

    The problem of time discontinuity (or jump condition) in the coalescence/dispersion (C/D) mixing model is addressed in probability density function (pdf). A C/D mixing model continuous in time is introduced. With the continuous mixing model, the process of chemical reaction can be fully coupled with mixing. In the case of homogeneous turbulence decay, the new model predicts a pdf very close to a Gaussian distribution, with finite higher moments also close to that of a Gaussian distribution. Results from the continuous mixing model are compared with both experimental data and numerical results from conventional C/D models. The effect of Coriolis forces on compressible homogeneous turbulence is studied using direct numerical simulation (DNS). The numerical method used in this study is an eight order compact difference scheme. Contrary to the conclusions reached by previous DNS studies on incompressible isotropic turbulence, the present results show that the Coriolis force increases the dissipation rate of turbulent kinetic energy, and that anisotropy develops as the Coriolis force increases. The Taylor-Proudman theory does apply since the derivatives in the direction of the rotation axis vanishes rapidly. A closer analysis reveals that the dissipation rate of the incompressible component of the turbulent kinetic energy indeed decreases with a higher rotation rate, consistent with incompressible flow simulations (Bardina), while the dissipation rate of the compressible part increases; the net gain is positive. Inertial waves are observed in the simulation results.

  16. The present state and future directions of PDF methods

    Science.gov (United States)

    Pope, S. B.

    1992-01-01

    The objectives of the workshop are presented in viewgraph format, as is this entire article. The objectives are to discuss the present status and the future direction of various levels of engineering turbulence modeling related to Computational Fluid Dynamics (CFD) computations for propulsion; to assure that combustion is an essential part of propulsion; and to discuss Probability Density Function (PDF) methods for turbulent combustion. Essential to the integration of turbulent combustion models is the development of turbulent model, chemical kinetics, and numerical method. Some turbulent combustion models typically used in industry are the k-epsilon turbulent model, the equilibrium/mixing limited combustion, and the finite volume codes.

  17. Recent progress in the joint velocity-scalar PDF method

    Science.gov (United States)

    Anand, M. S.

    1995-01-01

    This viewgraph presentation discusses joint velocity-scalar PDF method; turbulent combustion modeling issues for gas turbine combustors; PDF calculations for a recirculating flow; stochastic dissipation model; joint PDF calculations for swirling flows; spray calculations; reduced kinetics/manifold methods; parallel processing; and joint PDF focus areas.

  18. The osteoinductive potential of printable, cell-laden hydrogel-ceramic composites.

    NARCIS (Netherlands)

    Fedorovich, N.E.; Leeuwenburgh, S.C.G.; Helm, Y.J. van der; Alblas, J.; Dhert, W.J.

    2012-01-01

    Hydrogels used as injectables or in organ printing often lack the appropriate stimuli to direct osteogenic differentiation of embedded multipotent stromal cells (MSCs), resulting in limited bone formation in these matrices. Addition of calcium phosphate (CaP) particles to the printing mixture is

  19. Printable organic thin film transistors for glucose detection incorporating inkjet-printing of the enzyme recognition element

    Energy Technology Data Exchange (ETDEWEB)

    Elkington, D., E-mail: Daniel.Elkington@newcastle.edu.au; Wasson, M.; Belcher, W.; Dastoor, P. C.; Zhou, X. [Centre for Organic Electronics, The University of Newcastle, Callaghan 2308 (Australia)

    2015-06-29

    The effect of device architecture upon the response of printable enzymatic glucose sensors based on poly(3-hexythiophene) (P3HT) organic thin film transistors is presented. The change in drain current is used as the basis for glucose detection and we show that significant improvements in drain current response time can be achieved by modifying the design of the sensor structure. In particular, we show that eliminating the dielectric layer and reducing the thickness of the active layer reduce the device response time considerably. The results are in good agreement with a diffusion based model of device operation, where an initial rapid dedoping process is followed by a slower doping of the P3HT layer from protons that are enzymatically generated by glucose oxidase (GOX) at the Nafion gate electrode. The fitted diffusion data are consistent with a P3HT doping region that is close to the source-drain electrodes rather than located at the P3HT:[Nafion:GOX] interface. Finally, we demonstrate that further improvements in sensor structure and morphology can be achieved by inkjet-printing the GOX layer, offering a pathway to low-cost printed biosensors for the detection of glucose in saliva.

  20. 100 °C Thermal Stability of Printable Perovskite Solar Cells Using Porous Carbon Counter Electrodes.

    Science.gov (United States)

    Baranwal, Ajay K; Kanaya, Shusaku; Peiris, T A Nirmal; Mizuta, Gai; Nishina, Tomoya; Kanda, Hiroyuki; Miyasaka, Tsutomu; Segawa, Hiroshi; Ito, Seigo

    2016-09-22

    Many efforts have been made towards improving perovskite (PVK) solar cell stability, but their thermal stability, particularly at 85 °C (IEC 61646 climate chamber tests), remains a challenge. Outdoors, the installed solar cell temperature can reach up to 85 °C, especially in desert regions, providing sufficient motivation to study the effect of temperature stress at or above this temperature (e.g., 100 °C) to confirm the commercial viability of PVK solar cells for industrial companies. In this work, a three-layer printable HTM-free CH 3 NH 3 PbI 3 PVK solar cell with a mesoporous carbon back contact and UV-curable sealant was fabricated and tested for thermal stability over 1500 h at 100 °C. Interestingly, the position of the UV-curing glue was found to drastically affect the device stability. The side-sealed cells show high PCE stability and represent a large step toward commercialization of next generation organic-inorganic lead halide PVK solar cells. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  1. Java facilities in processing XML files - JAXB and generating PDF reports

    Directory of Open Access Journals (Sweden)

    Danut-Octavian SIMION

    2008-01-01

    Full Text Available The paper presents the Java programming language facilities in working with XML files using JAXB (The Java Architecture for XML Binding technology and generating PDF reports from XML files using Java objects. The XML file can be an existing one and could contain the data about an entity (Clients for example or it might be the result of a SELECT-SQL statement. JAXB generates JAVA classes through xs rules and a Marshalling, Unmarshalling compiler. The PDF file is build from a XML file and uses XSL-FO formatting file and a Java ResultSet object.

  2. Comments on the present state and future directions of PDF methods

    Science.gov (United States)

    Obrien, E. E.

    1992-01-01

    The one point probability density function (PDF) method is examined in light of its use in actual engineering problems. The PDF method, although relatively complicated, appears to be the only format available to handle the nonlinear stochastic difficulties caused by typical reaction kinetics. Turbulence modeling, if it is to play a central role in combustion modeling, has to be integrated with the chemistry in a way which produces accurate numerical solutions to combustion problems. It is questionable whether the development of turbulent models in isolation from the peculiar statistics of reactant concentrations is a fruitful line of development as far as propulsion is concerned. There are three issues for which additional viewgraphs are prepared: the one point pdf method; the amplitude mapping closure; and a hybrid strategy for replacing a full two point pdf treatment of reacting flows by a single point pdf and correlation functions. An appeal is made for the establishment of an adequate data base for compressible flow with reactions for Mach numbers of unity or higher.

  3. PDF methods for turbulent reactive flows

    Science.gov (United States)

    Hsu, Andrew T.

    1995-01-01

    Viewgraphs are presented on computation of turbulent combustion, governing equations, closure problem, PDF modeling of turbulent reactive flows, validation cases, current projects, and collaboration with industry and technology transfer.

  4. To Investigate the Absorption, Dynamic Contact Angle and Printability Effects of Synthetic Zeolite Pigments in an Inkjet Receptive Coating

    Science.gov (United States)

    Jalindre, Swaraj Sunil

    Ink absorption performance in inkjet receptive coatings containing synthetic zeolite pigments was studied. Coating pigment pore and particle size distribution are the key parameters that influence in modifying media surface properties, thus affecting the rate of ink penetration and drying time (Scholkopf, et al. 2004). The primary objective of this study was: (1) to investigate the synthetic zeolite pigment effects on inkjet ink absorption, dynamic contact angle and printability, and (2) to evaluate these novel synthetic zeolite pigments in replacing the fumed silica pigments in conventional inkjet receptive coatings. In this research study, single pigment coating formulations (in equal P:B ratio) were prepared using microporous synthetic zeolite pigments (5A, Organophilic and 13X) and polyvinyl alcohol (PVOH) binder. The laboratory-coated samples were characterized for absorption, air permeance, roughness, drying time, wettability and print fidelity. Based on the rheological data, it was found that the synthetic zeolite formulated coatings depicted a Newtonian flow behavior at low shear; while the industry accepted fumed silica based coatings displayed a characteristically high pseudoplastic flow behavior. Our coated samples generated using microporous synthetic zeolite pigments produced low absorption, reduced wettability and accelerated ink drying characteristics. These characteristics were caused due to the synthetic zeolite pigments, which resulted in relatively closed surface structure coated samples. The research suggested that no single selected synthetic zeolite coating performed better than the conventional fumed silica based coatings. Experimental data also showed that there was no apparent relationship between synthetic zeolite pigment pore sizes and inkjet ink absorption. For future research, above coated samples should be evaluated for pore size distribution using Mercury Porosimeter, which quantifies surface porosity of coated samples. This presented

  5. Layout-aware text extraction from full-text PDF of scientific articles.

    Science.gov (United States)

    Ramakrishnan, Cartic; Patnia, Abhishek; Hovy, Eduard; Burns, Gully Apc

    2012-05-28

    The Portable Document Format (PDF) is the most commonly used file format for online scientific publications. The absence of effective means to extract text from these PDF files in a layout-aware manner presents a significant challenge for developers of biomedical text mining or biocuration informatics systems that use published literature as an information source. In this paper we introduce the 'Layout-Aware PDF Text Extraction' (LA-PDFText) system to facilitate accurate extraction of text from PDF files of research articles for use in text mining applications. Our paper describes the construction and performance of an open source system that extracts text blocks from PDF-formatted full-text research articles and classifies them into logical units based on rules that characterize specific sections. The LA-PDFText system focuses only on the textual content of the research articles and is meant as a baseline for further experiments into more advanced extraction methods that handle multi-modal content, such as images and graphs. The system works in a three-stage process: (1) Detecting contiguous text blocks using spatial layout processing to locate and identify blocks of contiguous text, (2) Classifying text blocks into rhetorical categories using a rule-based method and (3) Stitching classified text blocks together in the correct order resulting in the extraction of text from section-wise grouped blocks. We show that our system can identify text blocks and classify them into rhetorical categories with Precision1 = 0.96% Recall = 0.89% and F1 = 0.91%. We also present an evaluation of the accuracy of the block detection algorithm used in step 2. Additionally, we have compared the accuracy of the text extracted by LA-PDFText to the text from the Open Access subset of PubMed Central. We then compared this accuracy with that of the text extracted by the PDF2Text system, 2commonly used to extract text from PDF. Finally, we discuss preliminary error analysis for

  6. Layout-aware text extraction from full-text PDF of scientific articles

    Directory of Open Access Journals (Sweden)

    Ramakrishnan Cartic

    2012-05-01

    Full Text Available Abstract Background The Portable Document Format (PDF is the most commonly used file format for online scientific publications. The absence of effective means to extract text from these PDF files in a layout-aware manner presents a significant challenge for developers of biomedical text mining or biocuration informatics systems that use published literature as an information source. In this paper we introduce the ‘Layout-Aware PDF Text Extraction’ (LA-PDFText system to facilitate accurate extraction of text from PDF files of research articles for use in text mining applications. Results Our paper describes the construction and performance of an open source system that extracts text blocks from PDF-formatted full-text research articles and classifies them into logical units based on rules that characterize specific sections. The LA-PDFText system focuses only on the textual content of the research articles and is meant as a baseline for further experiments into more advanced extraction methods that handle multi-modal content, such as images and graphs. The system works in a three-stage process: (1 Detecting contiguous text blocks using spatial layout processing to locate and identify blocks of contiguous text, (2 Classifying text blocks into rhetorical categories using a rule-based method and (3 Stitching classified text blocks together in the correct order resulting in the extraction of text from section-wise grouped blocks. We show that our system can identify text blocks and classify them into rhetorical categories with Precision1 = 0.96% Recall = 0.89% and F1 = 0.91%. We also present an evaluation of the accuracy of the block detection algorithm used in step 2. Additionally, we have compared the accuracy of the text extracted by LA-PDFText to the text from the Open Access subset of PubMed Central. We then compared this accuracy with that of the text extracted by the PDF2Text system, 2commonly used to extract text from PDF

  7. Reversing the Trend of Large Scale and Centralization in Manufacturing: The Case of Distributed Manufacturing of Customizable 3-D-Printable Self-Adjustable Glasses

    Directory of Open Access Journals (Sweden)

    Jephias Gwamuri

    2014-04-01

    Full Text Available Although the trend in manufacturing has been towards centralization to leverage economies of scale, the recent rapid technical development of open-source 3-D printers enables low-cost distributed bespoke production. This paper explores the potential advantages of a distributed manufacturing model of high-value products by investigating the application of 3-D printing to self-refraction eyeglasses. A series of parametric 3-D printable designs is developed, fabricated and tested to overcome limitations identified with mass-manufactured self-correcting eyeglasses designed for the developing world's poor. By utilizing 3-D printable self-adjustable glasses, communities not only gain access to far more diversity in product design, as the glasses can be customized for the individual, but 3-D printing also offers the potential for significant cost reductions. The results show that distributed manufacturing with open-source 3-D printing can empower developing world communities through the ability to print less expensive and customized self-adjusting eyeglasses. This offers the potential to displace both centrally manufactured conventional and self-adjusting glasses while completely eliminating the costs of the conventional optics correction experience, including those of highly-trained optometrists and ophthalmologists and their associated equipment. Although, this study only analyzed a single product, it is clear that other products would benefit from the same approach in isolated regions of the developing world.

  8. PDF4LHC recommendations for LHC Run II

    NARCIS (Netherlands)

    Butterworth, Jon; Carrazza, Stefano; Cooper-Sarkar, Amanda; Roeck, Albert de; Feltesse, Joel; Forte, Stefano; Gao, Jun; Glazov, Sasha; Huston, Joey; Kassabov, Zahari; McNulty, Ronan; Morsch, Andreas; Nadolsky, Pavel; Radescu, Voica; Rojo, Juan; Thorne, Robert S.

    2015-01-01

    We provide an updated recommendation for the usage of sets of parton distribution functions (PDFs) and the assessment of PDF and PDF+$\\alpha_s$ uncertainties suitable for applications at the LHC Run II. We review developments since the previous PDF4LHC recommendation, and discuss and compare the new

  9. IT Department User Survey PDF Usage Report

    CERN Document Server

    Jones, Pete

    2017-01-01

    During 2016 the IT-CDA group carried out a study of IT users and their working environments and habits with the aim of understanding the user community better. This project involved interviews with users from different working backgrounds and an online survey containing questions of user devices and software preferences. A section of the questions was aimed at understanding how people handle PDF documents and this note analyses the responses to these. This analysis will help IT-CDA to better understand the PDF requirements and so help us to improve the services that rely on these documents.

  10. Presumed PDF modeling of microjet assisted CH4–H2/air turbulent flames

    International Nuclear Information System (INIS)

    Chouaieb, Sirine; Kriaa, Wassim; Mhiri, Hatem; Bournot, Philippe

    2016-01-01

    Highlights: • Microjet assisted CH 4 –H 2 /air turbulent flames are numerically investigated. • Temperature, species and soot are well predicted by the Presumed PDF model. • An inner flame is identified due to the microjet presence. • The addition of hydrogen to the microjet assisted flames enhances mixing. • Soot emission is reduced by 36% for a 10% enriched microjet assisted flame. - Abstract: The characteristics of microjet assisted CH 4 –H 2 /air flames in a turbulent mode are numerically investigated. Simulations are performed using the Computational Fluid Dynamics code Fluent. The Presumed PDF and the Discrete Ordinates models are considered respectively for combustion and radiation modeling. The k–ε Realizable model is adopted as a turbulence closure model. The Tesner model is used to calculate soot particle quantities. In the first part of this paper, the Presumed PDF model is compared to the Eddy Dissipation model and to slow chemistry combustion models from literature. Results show that the Presumed PDF model predicts correctly thermal and species fields, as well as soot formation. The effect of hydrogen enrichment on CH 4 /air confined flames under the addition of an air microjet is investigated in the second part of this work. The found results show that an inner flame was identified due to the air microjet for the CH 4 –H 2 /air flames. Moreover, the increase of hydrogen percentage in the fuel mixture leads to mixing enhancement and consequently to considerable soot emission reduction.

  11. Technical Training: Annonce de nouveau cours: Utilisation des fichiers PDF avec ACROBAT 6.0

    CERN Multimedia

    Monique Duval

    2005-01-01

    CERN Technical Training 2005: Learning for the LHC! Un nouveau cours pratique sur Adobe Acrobat version 6.0 est proposé à l'ensemble du personnel par le service de l'Enseignement Technique, pour répondre aux besoins de formation des utilisateurs des documents PDF. La première session aura lieu le 1er mars 2005. Objectifs : Maîtriser les différentes fonctions d'Adobe Acrobat 6.0. Programme : Présentation d'Adobe Acrobat 6.0. Création de fichiers PDF depuis Microsoft Office et d'autres applications. Création de fichiers Postscript. Modification de fichiers PDF, enregistrement et exportation. Protection par mot de passe et par signature numérique. Navigation dans les documents : interactivité, vignettes et pages, signets, liens, articles, affichage et ouverture des PDF, recherche. Travail en commun: Ajout de commentaires, révision par messagerie électronique Dur&e...

  12. 621.pdf | Pdf2006Oct | sadha-na | Indian Academy of Sciences

    Indian Academy of Sciences (India)

    Home; sadha-na; Pdf2006Oct; 621.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. 29th Mid-year meeting. Posted on 19 January 2018. The 29th Mid-year meeting of the Academy will be ...

  13. e73.pdf.pdf | 92 | OnlineResources | jgenet | www.ias.ac.in | http ...

    Indian Academy of Sciences (India)

    Home; public; Volumes; jgen; 092; online; http; www.ias.ac.in; jgenet; OnlineResources; 92; e73.pdf.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. 29th Mid-year meeting. Posted on 19 ...

  14. The PDF method for turbulent combustion

    Science.gov (United States)

    Pope, S. B.

    1991-01-01

    Probability Density Function (PDF) methods provide a means of calculating the properties of turbulent reacting flows. They have been successfully applied to many turbulent flames, including some with finite rate kinetic effects. Here the methods are reviewed with an emphasis on computational issues and their application to turbulent combustion.

  15. Extra dimensions: 3D and time in PDF documentation

    International Nuclear Information System (INIS)

    Graf, N A

    2011-01-01

    Experimental science is replete with multi-dimensional information which is often poorly represented by the two dimensions of presentation slides and print media. Past efforts to disseminate such information to a wider audience have failed for a number of reasons, including a lack of standards which are easy to implement and have broad support. Adobe's Portable Document Format (PDF) has in recent years become the de facto standard for secure, dependable electronic information exchange. It has done so by creating an open format, providing support for multiple platforms and being reliable and extensible. By providing support for the ECMA standard Universal 3D (U3D) file format in its free Adobe Reader software, Adobe has made it easy to distribute and interact with 3D content. By providing support for scripting and animation, temporal data can also be easily distributed to a wide, non-technical audience. We discuss how the field of radiation imaging could benefit from incorporating full 3D information about not only the detectors, but also the results of the experimental analyses, in its electronic publications. In this article, we present examples drawn from high-energy physics, mathematics and molecular biology which take advantage of this functionality. We demonstrate how 3D detector elements can be documented, using either CAD drawings or other sources such as GEANT visualizations as input.

  16. A Low-Cost Open Source 3D-Printable Dexterous Anthropomorphic Robotic Hand with a Parallel Spherical Joint Wrist for Sign Languages Reproduction

    Directory of Open Access Journals (Sweden)

    Andrea Bulgarelli

    2016-06-01

    Full Text Available We present a novel open-source 3D-printable dexterous anthropomorphic robotic hand specifically designed to reproduce Sign Languages’ hand poses for deaf and deaf-blind users. We improved the InMoov hand, enhancing dexterity by adding abduction/adduction degrees of freedom of three fingers (thumb, index and middle fingers and a three-degrees-of-freedom parallel spherical joint wrist. A systematic kinematic analysis is provided. The proposed robotic hand is validated in the framework of the PARLOMA project. PARLOMA aims at developing a telecommunication system for deaf-blind people, enabling remote transmission of signs from tactile Sign Languages. Both hardware and software are provided online to promote further improvements from the community.

  17. Printable Transfer-Free and Wafer-Size MoS2/Graphene van der Waals Heterostructures for High-Performance Photodetection.

    Science.gov (United States)

    Liu, Qingfeng; Cook, Brent; Gong, Maogang; Gong, Youpin; Ewing, Dan; Casper, Matthew; Stramel, Alex; Wu, Judy

    2017-04-12

    Two-dimensional (2D) MoS 2 /graphene van der Waals heterostructures integrate the superior light-solid interaction in MoS 2 and charge mobility in graphene for high-performance optoelectronic devices. Key to the device performance lies in a clean MoS 2 /graphene interface to facilitate efficient transfer of photogenerated charges. Here, we report a printable and transfer-free process for fabrication of wafer-size MoS 2 /graphene van der Waals heterostructures obtained using a metal-free-grown graphene, followed by low-temperature growth of MoS 2 from the printed thin film of ammonium thiomolybdate on graphene. The photodetectors based on the transfer-free MoS 2 /graphene heterostructures exhibit extraordinary short photoresponse rise/decay times of 20/30 ms, which are significantly faster than those of the previously reported MoS 2 /transferred-graphene photodetectors (0.28-1.5 s). In addition, a high photoresponsivity of up to 835 mA/W was observed in the visible spectrum on such transfer-free MoS 2 /graphene heterostructures, which is much higher than that of the reported photodetectors based on the exfoliated layered MoS 2 (0.42 mA/W), the graphene (6.1 mA/W), and transfer-free MoS 2 /graphene/SiC heterostructures (∼40 mA/W). The enhanced performance is attributed to the clean interface on the transfer-free MoS 2 /graphene heterostructures. This printable and transfer-free process paves the way for large-scale commercial applications of the emerging 2D heterostructures in optoelectronics and sensors.

  18. Direct photon production and PDF fits reloaded

    Energy Technology Data Exchange (ETDEWEB)

    Campbell, John M.; Rojo, Juan; Slade, Emma; Williams, Ciaran

    2018-02-08

    Direct photon production in hadronic collisions provides a handle on the gluon PDF by means of the QCD Compton scattering process. In this work we revisit the impact of direct photon production on a global PDF analysis, motivated by the recent availability of the next-to-next-to-leading (NNLO) calculation for this process. We demonstrate that the inclusion of NNLO QCD and leading-logarithmic electroweak corrections leads to a good quantitative agreement with the ATLAS measurements at 8 TeV and 13 TeV, except for the most forward rapidity region in the former case. By including the ATLAS 8 TeV direct photon production data in the NNPDF3.1 NNLO global analysis, we assess its impact on the medium-x gluon. We also study the constraining power of the direct photon production measurements on PDF fits based on different datasets, in particular on the NNPDF3.1 no-LHC and collider-only fits. We also present updated NNLO theoretical predictions for direct photon production at 13 TeV that include the constraints from the 8 TeV measurements.

  19. The PDF4LHC Working Group Interim Report

    CERN Document Server

    Alekhin, Sergey; Ball, Richard D.; Bertone, Valerio; Blumlein, Johannes; Botje, Michiel; Butterworth, Jon; Cerutti, Francesco; Cooper-Sarkar, Amanda; de Roeck, Albert; Del Debbio, Luigi; Feltesse, Joel; Forte, Stefano; Glazov, Alexander; Guffanti, Alberto; Gwenlan, Claire; Huston, Joey; Jimenez-Delgado, Pedro; Lai, Hung-Liang; Latorre, Jose I.; McNulty, Ronan; Nadolsky, Pavel; Olaf Moch, Sven; Pumplin, Jon; Radescu, Voica; Rojo, Juan; Sjostrand, Torbjorn; Stirling, W.J.; Stump, Daniel; Thorne, Robert S.; Ubiali, Maria; Vicini, Alessandro; Watt, Graeme; Yuan, C.-P.

    2011-01-01

    This document is intended as a study of benchmark cross sections at the LHC (at 7 TeV) at NLO using modern parton distribution functions currently available from the 6 PDF fitting groups that have participated in this exercise. It also contains a succinct user guide to the computation of PDFs, uncertainties and correlations using available PDF sets. A companion note, also submitted to the archive, provides an interim summary of the current recommendations of the PDF4LHC working group for the use of parton distribution functions and of PDF uncertainties at the LHC, for cross section and cross section uncertainty calculations.

  20. E-submission Format for Sub-chronic and Chronic Studies

    Science.gov (United States)

    The purpose of this document is to suggest the format for final reports and to provide instructions for creation of Adobe PDF electronic submission documents for electronic submission of sub-chronic and chronic studies for pesticides.

  1. A compression algorithm for the combination of PDF sets

    NARCIS (Netherlands)

    Carrazza, Stefano; Latorre, Jose I.; Rojo, Juan; Watt, Graeme

    2015-01-01

    The current PDF4LHC recommendation to estimate uncertainties due to parton distribution functions (PDFs) in theoretical predictions for LHC processes involves the combination of separate predictions computed using PDF sets from different groups, each of which comprises a relatively large number of

  2. Maximum entropy PDF projection: A review

    Science.gov (United States)

    Baggenstoss, Paul M.

    2017-06-01

    We review maximum entropy (MaxEnt) PDF projection, a method with wide potential applications in statistical inference. The method constructs a sampling distribution for a high-dimensional vector x based on knowing the sampling distribution p(z) of a lower-dimensional feature z = T (x). Under mild conditions, the distribution p(x) having highest possible entropy among all distributions consistent with p(z) may be readily found. Furthermore, the MaxEnt p(x) may be sampled, making the approach useful in Monte Carlo methods. We review the theorem and present a case study in model order selection and classification for handwritten character recognition.

  3. PDF4LHC recommendations for LHC Run II

    CERN Document Server

    Butterworth, Jon; Cooper-Sarkar, Amanda; De Roeck, Albert; Feltesse, Joel; Forte, Stefano; Gao, Jun; Glazov, Sasha; Huston, Joey; Kassabov, Zahari; McNulty, Ronan; Morsch, Andreas; Nadolsky, Pavel; Radescu, Voica; Rojo, Juan; Thorne, Robert

    2016-01-01

    We provide an updated recommendation for the usage of sets of parton distribution functions (PDFs) and the assessment of PDF and PDF+$\\alpha_s$ uncertainties suitable for applications at the LHC Run II. We review developments since the previous PDF4LHC recommendation, and discuss and compare the new generation of PDFs, which include substantial information from experimental data from the Run I of the LHC. We then propose a new prescription for the combination of a suitable subset of the available PDF sets, which is presented in terms of a single combined PDF set. We finally discuss tools which allow for the delivery of this combined set in terms of optimized sets of Hessian eigenvectors or Monte Carlo replicas, and their usage, and provide some examples of their application to LHC phenomenology.

  4. Description of the digital formats of electronic documents used in digital library

    International Nuclear Information System (INIS)

    Galabova, Sevdalina; Trencheva, Tereza; Trenchev, Ivan

    2009-01-01

    A digital library is a library where collections are stored in electronic formats and are easy to be accessed by computers. The digital content may be stored by local machine, or accessed remotely via computer networks. A digital library is a type of information retrieval system. In this paper we will present a few digital format as pdf, djvu and etc. It will be denote the specific of the formats, their history and licenses policy. We will discuss different similarities between these formats.. Keywords: digital library, electronic formats, pdf, djvu

  5. Printability of calcium phosphate: calcium sulfate powders for the application of tissue engineered bone scaffolds using the 3D printing technique.

    Science.gov (United States)

    Zhou, Zuoxin; Buchanan, Fraser; Mitchell, Christina; Dunne, Nicholas

    2014-05-01

    In this study, calcium phosphate (CaP) powders were blended with a three-dimensional printing (3DP) calcium sulfate (CaSO4)-based powder and the resulting composite powders were printed with a water-based binder using the 3DP technology. Application of a water-based binder ensured the manufacture of CaP:CaSO4 constructs on a reliable and repeatable basis, without long term damage of the printhead. Printability of CaP:CaSO4 powders was quantitatively assessed by investigating the key 3DP process parameters, i.e. in-process powder bed packing, drop penetration behavior and the quality of printed solid constructs. Effects of particle size, CaP:CaSO4 ratio and CaP powder type on the 3DP process were considered. The drop penetration technique was used to reliably identify powder formulations that could be potentially used for the application of tissue engineered bone scaffolds using the 3DP technique. Significant improvements (pprinted constructs were manufactured, which exhibited appropriate green compressive strength and a high level of printing accuracy. Copyright © 2014 Elsevier B.V. All rights reserved.

  6. In Situ PDF Study of the Nucleation and Growth of Intermetallic PtPb Nanocrystals

    DEFF Research Database (Denmark)

    Saha, Dipankar; Bojesen, Espen D.; Mamakhel, Mohammad Aref Hasen

    2017-01-01

    The mechanism of Pt and PtPb nanocrystal formation under supercritical ethanol conditions has been investigated by means of in situ X-ray total scattering and pair distribution function (PDF) analysis. The metal complex structures of two different platinum precursor solutions, chloroplatinic acid...... supercritical ethanol process for obtaining phase-pure hexagonal PtPb nanocrystals. The study thus highlights the importance of in situ studies in revealing atomic-scale information about nucleation mechanisms, which can be used in design of specific synthesis pathways, and the new continuous-flow process...

  7. The gamma-ray-flux PDF from galactic halo substructure

    International Nuclear Information System (INIS)

    Lee, Samuel K.; Ando, Shin'ichiro; Kamionkowski, Marc

    2009-01-01

    One of the targets of the recently launched Fermi Gamma-ray Space Telescope is a diffuse gamma-ray background from dark-matter annihilation or decay in the Galactic halo. N-body simulations and theoretical arguments suggest that the dark matter in the Galactic halo may be clumped into substructure, rather than smoothly distributed. Here we propose the gamma-ray-flux probability distribution function (PDF) as a probe of substructure in the Galactic halo. We calculate this PDF for a phenomenological model of halo substructure and determine the regions of the substructure parameter space in which the PDF may be distinguished from the PDF for a smooth distribution of dark matter. In principle, the PDF allows a statistical detection of substructure, even if individual halos cannot be detected. It may also allow detection of substructure on the smallest microhalo mass scales, ∼ M ⊕ , for weakly-interacting massive particles (WIMPs). Furthermore, it may also provide a method to measure the substructure mass function. However, an analysis that assumes a typical halo substructure model and a conservative estimate of the diffuse background suggests that the substructure PDF may not be detectable in the lifespan of Fermi in the specific case that the WIMP is a neutralino. Nevertheless, for a large range of substructure, WIMP annihilation, and diffuse background models, PDF analysis may provide a clear signature of substructure

  8. Design and application of PDF model for extracting

    Science.gov (United States)

    Xiong, Lei

    2013-07-01

    In order to change the steps of contributions in editorial department system from two steps to one, this paper advocates that the technology of extracting the information of PDF files should be transplanted from PDF reader into IEEE Xplore contribution system and that it should be combined with uploading in batch skillfully to enable editors to upload PDF files about 1GB in batch for once. Computers will extract the information of the title, author, address, mailbox, abstract and key words of thesis voluntarily for later retrieval so as to save plenty of labor, material and finance for editorial department.

  9. PDF approach for turbulent scalar field: Some recent developments

    Science.gov (United States)

    Gao, Feng

    1993-01-01

    The probability density function (PDF) method has been proven a very useful approach in turbulence research. It has been particularly effective in simulating turbulent reacting flows and in studying some detailed statistical properties generated by a turbulent field There are, however, some important questions that have yet to be answered in PDF studies. Our efforts in the past year have been focused on two areas. First, a simple mixing model suitable for Monte Carlo simulations has been developed based on the mapping closure. Secondly, the mechanism of turbulent transport has been analyzed in order to understand the recently observed abnormal PDF's of turbulent temperature fields generated by linear heat sources.

  10. Environmental Sensitivity Index (ESI) Atlas: East Florida, maps in portable document format, Volume 1, Volume 2 (NODC Accession 0004150)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set comprises the Environmental Sensitivity Index (ESI) maps in Portable Document Format (.PDF) for the shoreline of East Florida (to encompass the coastal...

  11. Metadata extraction from scientific documents in PDF

    OpenAIRE

    Alan Pinto Souza

    2014-01-01

    A maioria dos artigos científicos estão disponíveis no formato PDF. Este padrão permite a geracão de metadados que são inclusos dentro do documento. Porém, muitos autores não definem esta informação, fazendo esse recurso inseguro ou incompleto. Este fato tem motivado pesquisa que busca extrair metadados automaticamente. A extração automática de metadados foi classificada como uma das tarefas mais desafiadoras na área de engenharia de documentos. Este trabalho propõe Artic, um método para extr...

  12. Sparse PDF Volumes for Consistent Multi-Resolution Volume Rendering

    KAUST Repository

    Sicat, Ronell Barrera; Kruger, Jens; Moller, Torsten; Hadwiger, Markus

    2014-01-01

    This paper presents a new multi-resolution volume representation called sparse pdf volumes, which enables consistent multi-resolution volume rendering based on probability density functions (pdfs) of voxel neighborhoods. These pdfs are defined

  13. Pressure algorithm for elliptic flow calculations with the PDF method

    Science.gov (United States)

    Anand, M. S.; Pope, S. B.; Mongia, H. C.

    1991-01-01

    An algorithm to determine the mean pressure field for elliptic flow calculations with the probability density function (PDF) method is developed and applied. The PDF method is a most promising approach for the computation of turbulent reacting flows. Previous computations of elliptic flows with the method were in conjunction with conventional finite volume based calculations that provided the mean pressure field. The algorithm developed and described here permits the mean pressure field to be determined within the PDF calculations. The PDF method incorporating the pressure algorithm is applied to the flow past a backward-facing step. The results are in good agreement with data for the reattachment length, mean velocities, and turbulence quantities including triple correlations.

  14. Printable Solid-State Lithium-Ion Batteries: A New Route toward Shape-Conformable Power Sources with Aesthetic Versatility for Flexible Electronics.

    Science.gov (United States)

    Kim, Se-Hee; Choi, Keun-Ho; Cho, Sung-Ju; Choi, Sinho; Park, Soojin; Lee, Sang-Young

    2015-08-12

    Forthcoming flexible/wearable electronic devices with shape diversity and mobile usability garner a great deal of attention as an innovative technology to bring unprecedented changes in our daily lives. From the power source point of view, conventional rechargeable batteries (one representative example is a lithium-ion battery) with fixed shapes and sizes have intrinsic limitations in fulfilling design/performance requirements for the flexible/wearable electronics. Here, as a facile and efficient strategy to address this formidable challenge, we demonstrate a new class of printable solid-state batteries (referred to as "PRISS batteries"). Through simple stencil printing process (followed by ultraviolet (UV) cross-linking), solid-state composite electrolyte (SCE) layer and SCE matrix-embedded electrodes are consecutively printed on arbitrary objects of complex geometries, eventually leading to fully integrated, multilayer-structured PRISS batteries with various form factors far beyond those achievable by conventional battery technologies. Tuning rheological properties of SCE paste and electrode slurry toward thixotropic fluid characteristics, along with well-tailored core elements including UV-cured triacrylate polymer and high boiling point electrolyte, is a key-enabling technology for the realization of PRISS batteries. This process/material uniqueness allows us to remove extra processing steps (related to solvent drying and liquid-electrolyte injection) and also conventional microporous separator membranes, thereupon enabling the seamless integration of shape-conformable PRISS batteries (including letters-shaped ones) into complex-shaped objects. Electrochemical behavior of PRISS batteries is elucidated via an in-depth analysis of cell impedance, which provides a theoretical basis to enable sustainable improvement of cell performance. We envision that PRISS batteries hold great promise as a reliable and scalable platform technology to open a new concept of cell

  15. PDF sensitivity studies from ATLAS measurements

    CERN Document Server

    Hanna, Remie; The ATLAS collaboration

    2015-01-01

    Several measurements performed by the ATLAS collaboration are either useful to constrain the proton structure or are affected by its associated uncertainties. The strange-quark density is rather poorly known at low x. Measurements of the W+c production and the inclusive W and Z differential cross sections are found to constrain the strange-quark density. Drell-Yan cross section measurements performed above and below the Z peak region have a different sensitivity to parton flavour, parton momentum fraction x and scale Q compared to measurements on the Z peak and can also be used to constrain the photon content of the proton. Measurements of the inclusive jet and photon cross sections are standard candles and can be useful to constrain the medium and high x gluon densities. Precision electroweak studies performed by ATLAS can be limited by the current knowledge on the proton structure. Among those are the measurement of the effective weak mixing angle and the mass of the W boson. Dedicated PDF studies were perf...

  16. Methylation of zebularine: a quantum mechanical study incorporating interactive 3D pdf graphs.

    Science.gov (United States)

    Selvam, Lalitha; Vasilyev, Vladislav; Wang, Feng

    2009-08-20

    Methylation of a cytidine deaminase inhibitor, 1-(beta-D-ribofuranosyl)-2-pyrimidone (i.e., zebularine (zeb)), which produces 1-(beta-D-ribofuranosyl)-5-methyl-2-pyrimidinone (d5), has been investigated using density functional theory models. The optimized structures of zeb and d5 and the valence orbitals primarily responsible for the methylation in d5 are presented using state-of-the-art interactive (on a computer or online) three-dimensional (3D) graphics in a portable document format (pdf) file, 3D-PDF (http://www.web3d.org/x3d/vrml/ ). The facility to embed 3D molecular structures into pdf documents has been developed jointly at Swinburne University of Technology and the National Computational Infrastructure, the Australian National University. The methyl fragment in the base moiety shows little effect on the sugar puckering but apparently affects anisotropic properties, such as condensed Fukui functions. Binding energy spectra, both valence space and core space, are noticeably affected; in particular, in the outer-valence space (e.g., IP < 20 eV). The methyl fragment delocalizes and diffuses into almost all valence space, but orbitals 8 (57a, IP = 12.57 eV), 18 (47a, IP = 14.70 eV), and 37 (28a, IP = 22.15 eV) are identified as fingerprint for the methyl fragment. In the inner shell, however, the impact of the methyl can be localized and identified by chemical shift. A small, global, red shift is found for the O-K, N-K and sugar C-K spectra, whereas the base C-K spectrum exhibits apparent methyl-related changes.

  17. 46 CFR 67.218 - Optional filing of instruments in portable document format as attachments to electronic mail.

    Science.gov (United States)

    2010-10-01

    ... format as attachments to electronic mail. 67.218 Section 67.218 Shipping COAST GUARD, DEPARTMENT OF... format as attachments to electronic mail. (a) Any instrument identified as eligible for filing and recording under § 67.200 may be submitted in portable document format (.pdf) as an attachment to electronic...

  18. Application of PDF methods to compressible turbulent flows

    Science.gov (United States)

    Delarue, B. J.; Pope, S. B.

    1997-09-01

    A particle method applying the probability density function (PDF) approach to turbulent compressible flows is presented. The method is applied to several turbulent flows, including the compressible mixing layer, and good agreement is obtained with experimental data. The PDF equation is solved using a Lagrangian/Monte Carlo method. To accurately account for the effects of compressibility on the flow, the velocity PDF formulation is extended to include thermodynamic variables such as the pressure and the internal energy. The mean pressure, the determination of which has been the object of active research over the last few years, is obtained directly from the particle properties. It is therefore not necessary to link the PDF solver with a finite-volume type solver. The stochastic differential equations (SDE) which model the evolution of particle properties are based on existing second-order closures for compressible turbulence, limited in application to low turbulent Mach number flows. Tests are conducted in decaying isotropic turbulence to compare the performances of the PDF method with the Reynolds-stress closures from which it is derived, and in homogeneous shear flows, at which stage comparison with direct numerical simulation (DNS) data is conducted. The model is then applied to the plane compressible mixing layer, reproducing the well-known decrease in the spreading rate with increasing compressibility. It must be emphasized that the goal of this paper is not as much to assess the performance of models of compressibility effects, as it is to present an innovative and consistent PDF formulation designed for turbulent inhomogeneous compressible flows, with the aim of extending it further to deal with supersonic reacting flows.

  19. PDF fit in the fixed-flavour-number scheme

    International Nuclear Information System (INIS)

    Alekhin, S.; Bluemlein, J.; Moch, S.

    2012-02-01

    We discuss the heavy-quark contribution to deep inelastic scattering in the scheme with n f =3;4;5 fixed flavors. Based on the recent ABM11 PDF analysis of world data for deep-inelastic scattering and fixed-target data for the Drell-Yan process with the running-mass definition for heavy quarks we show that fixed flavor number scheme is sufficient for describing the deep-inelastic-scattering data in the entire kinematic range. We compare with other PDF sets and comment on the implications for measuring the strong coupling constant α s (M Z ).

  20. PDF fit in the fixed-flavour-number scheme

    Energy Technology Data Exchange (ETDEWEB)

    Alekhin, S. [Deutsches Elektronen-Synchrotron (DESY), Zeuthen (Germany); Institute for High Energy Physics, Moscow (Russian Federation); Bluemlein, J.; Moch, S. [Deutsches Elektronen-Synchrotron (DESY), Zeuthen (Germany)

    2012-02-15

    We discuss the heavy-quark contribution to deep inelastic scattering in the scheme with n{sub f}=3;4;5 fixed flavors. Based on the recent ABM11 PDF analysis of world data for deep-inelastic scattering and fixed-target data for the Drell-Yan process with the running-mass definition for heavy quarks we show that fixed flavor number scheme is sufficient for describing the deep-inelastic-scattering data in the entire kinematic range. We compare with other PDF sets and comment on the implications for measuring the strong coupling constant {alpha}{sub s}(M{sub Z}).

  1. Reference and PDF-manager software: complexities, support and workflow.

    Science.gov (United States)

    Mead, Thomas L; Berryman, Donna R

    2010-10-01

    In the past, librarians taught reference management by training library users to use established software programs such as RefWorks or EndNote. In today's environment, there is a proliferation of Web-based programs that are being used by library clientele that offer a new twist on the well-known reference management programs. Basically, these new programs are PDF-manager software (e.g., Mendeley or Papers). Librarians are faced with new questions, issues, and concerns, given the new workflows and pathways that these PDF-manager programs present. This article takes a look at some of those.

  2. PDF methods for combustion in high-speed turbulent flows

    Science.gov (United States)

    Pope, Stephen B.

    1995-01-01

    This report describes the research performed during the second year of this three-year project. The ultimate objective of the project is extend the applicability of probability density function (pdf) methods from incompressible to compressible turbulent reactive flows. As described in subsequent sections, progress has been made on: (1) formulation and modelling of pdf equations for compressible turbulence, in both homogeneous and inhomogeneous inert flows; and (2) implementation of the compressible model in various flow configurations, namely decaying isotropic turbulence, homogeneous shear flow and plane mixing layer.

  3. Analysis of a PDF model in a mixing layer case

    International Nuclear Information System (INIS)

    Minier, J.P.; Pozorski, J.

    1996-04-01

    A recent turbulence model put forward by Pope (1991) in the context of PDF modeling has been applied to a mixing layer case. This model solves the one-point joint velocity-dissipation pdf equation by simulating the instantaneous behaviour of a large number of Lagrangian fluid particles. Closure of the evolution equations of these Lagrangian particles is based on diffusion stochastic processes. The paper reports numerical results and tries to analyse the physical meaning of some variables, in particular the dissipation-weighted kinetic energy and its relation with external intermittency. (authors). 14 refs., 7 figs

  4. Implementation of Super-Encryption with Trithemius Algorithm and Double Transposition Cipher in Securing PDF Files on Android Platform

    Science.gov (United States)

    Budiman, M. A.; Rachmawati, D.; Jessica

    2018-03-01

    This study aims to combine the trithemus algorithm and double transposition cipher in file security that will be implemented to be an Android-based application. The parameters being examined are the real running time, and the complexity value. The type of file to be used is a file in PDF format. The overall result shows that the complexity of the two algorithms with duper encryption method is reported as Θ (n 2). However, the processing time required in the encryption process uses the Trithemius algorithm much faster than using the Double Transposition Cipher. With the length of plaintext and password linearly proportional to the processing time.

  5. HiQ - A high-Q diffractometer for PDF measurements

    International Nuclear Information System (INIS)

    Brunelli, M.; Fischer, H.E.; Gaehler, R.; Chatterji, T.

    2011-01-01

    The local structure of many important functional materials is often different from the average structure, as revealed by diffraction, due to, e.g. doping, mixed site occupancy, or formation of time-dependent local distortions. To get information on both the average and the local structures one needs to perform a joint Rietveld and PDF (Pair Distribution Function) analysis of the total scattering, for which we need data to Q = 30 - 35 Angstroms with Δd/d ∼ 3*10 -3 . Here, we describe how the hot-source diffractometer D4 can be adapted to achieve this capability, and outline one possible design of a dedicated high-Q diffractometer at the ILL (Laue Langevin Institute), using the vacant inclined hot-neutron beam IH2. (authors)

  6. 0090.pdf | 12 | 087 | pram | Volumes | public | Indian Academy of ...

    Indian Academy of Sciences (India)

    Home; public; Volumes; pram; 087; 12; 0090.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. Theory Of Evolution. Posted on 23 January 2018. Joint Statement by the Three Science ...

  7. 424.pdf | 10feb2011 | currsci | Indian Academy of Sciences

    Indian Academy of Sciences (India)

    Home; currsci; 10feb2011; 424.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube · Twitter · Facebook · Blog. Academy News. IAS Logo. Summer Research Fellowship Programme 2018 · Focus Area Science Technology Summer Fellowship ...

  8. 1609.pdf | dec102000 | currsci | Indian Academy of Sciences

    Indian Academy of Sciences (India)

    Home; currsci; dec102000; 1609.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube · Twitter · Facebook · Blog. Academy News. IAS Logo. Ethical Guidelines and Procedures document. Posted on 17 January 2017. A revised version of the ...

  9. 727.pdf | mar102006 | currsci | Indian Academy of Sciences

    Indian Academy of Sciences (India)

    Home; currsci; mar102006; 727.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube · Twitter · Facebook · Blog. Academy News. IAS Logo. Ethical Guidelines and Procedures document. Posted on 17 January 2017. A revised version of the ...

  10. APFEL : A PDF Evolution Library with QED corrections

    NARCIS (Netherlands)

    Bertone, Valerio; Carrazza, Stefano; Rojo, Juan

    Quantum electrodynamics and electroweak corrections are important ingredients for many theoretical predictions at the LHC. This paper documents APFEL, a new PDF evolution package that allows for the first time to perform DGLAP evolution up to NNLO in QCD and to LO in QED, in the

  11. 154.pdf | 25jan2011 | currsci | Indian Academy of Sciences

    Indian Academy of Sciences (India)

    Home; currsci; 25jan2011; 154.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube · Twitter · Facebook · Blog. Academy News. IAS Logo. Ethical Guidelines and Procedures document. Posted on 17 January 2017. A revised version of the ...

  12. price list 2015.pdf | Subscription | Journals | Resources | public ...

    Indian Academy of Sciences (India)

    Home; public; Resources; Journals; Subscription; price list 2015.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. 29th Mid-year meeting. Posted on 19 January 2018. The 29th Mid-year ...

  13. Edgeworth Expansion Based Model for the Convolutional Noise pdf

    Directory of Open Access Journals (Sweden)

    Yonatan Rivlin

    2014-01-01

    Full Text Available Recently, the Edgeworth expansion up to order 4 was used to represent the convolutional noise probability density function (pdf in the conditional expectation calculations where the source pdf was modeled with the maximum entropy density approximation technique. However, the applied Lagrange multipliers were not the appropriate ones for the chosen model for the convolutional noise pdf. In this paper we use the Edgeworth expansion up to order 4 and up to order 6 to model the convolutional noise pdf. We derive the appropriate Lagrange multipliers, thus obtaining new closed-form approximated expressions for the conditional expectation and mean square error (MSE as a byproduct. Simulation results indicate hardly any equalization improvement with Edgeworth expansion up to order 4 when using optimal Lagrange multipliers over a nonoptimal set. In addition, there is no justification for using the Edgeworth expansion up to order 6 over the Edgeworth expansion up to order 4 for the 16QAM and easy channel case. However, Edgeworth expansion up to order 6 leads to improved equalization performance compared to the Edgeworth expansion up to order 4 for the 16QAM and hard channel case as well as for the case where the 64QAM is sent via an easy channel.

  14. A Lagrangian mixing frequency model for transported PDF modeling

    Science.gov (United States)

    Turkeri, Hasret; Zhao, Xinyu

    2017-11-01

    In this study, a Lagrangian mixing frequency model is proposed for molecular mixing models within the framework of transported probability density function (PDF) methods. The model is based on the dissipations of mixture fraction and progress variables obtained from Lagrangian particles in PDF methods. The new model is proposed as a remedy to the difficulty in choosing the optimal model constant parameters when using conventional mixing frequency models. The model is implemented in combination with the Interaction by exchange with the mean (IEM) mixing model. The performance of the new model is examined by performing simulations of Sandia Flame D and the turbulent premixed flame from the Cambridge stratified flame series. The simulations are performed using the pdfFOAM solver which is a LES/PDF solver developed entirely in OpenFOAM. A 16-species reduced mechanism is used to represent methane/air combustion, and in situ adaptive tabulation is employed to accelerate the finite-rate chemistry calculations. The results are compared with experimental measurements as well as with the results obtained using conventional mixing frequency models. Dynamic mixing frequencies are predicted using the new model without solving additional transport equations, and good agreement with experimental data is observed.

  15. PDF analysis of PuAl alloys local structure

    Energy Technology Data Exchange (ETDEWEB)

    Platteau, C. [CEA Valduc, 21120 Is-sur-Tille (France)], E-mail: platteau.cyril@yahoo.fr; Bruckel, P.; Ravat, B.; Delaunay, F. [CEA Valduc, 21120 Is-sur-Tille (France)

    2009-03-15

    For understanding singular properties of plutonium, there is a need in studying the average and local atomic structure in Pu alloys. To study the local structure of the {delta} phase, a pair distribution function (PDF) analysis was done and has shown some significant differences with the average structure.

  16. Stellar formation

    CERN Document Server

    Reddish, V C

    1978-01-01

    Stellar Formation brings together knowledge about the formation of stars. In seeking to determine the conditions necessary for star formation, this book examines questions such as how, where, and why stars form, and at what rate and with what properties. This text also considers whether the formation of a star is an accident or an integral part of the physical properties of matter. This book consists of 13 chapters divided into two sections and begins with an overview of theories that explain star formation as well as the state of knowledge of star formation in comparison to stellar structure

  17. Reflowing-driven paragraph recognition for electronic books in PDF

    Science.gov (United States)

    Fang, Jing; Tang, Zhi; Gao, Liangcai

    2011-01-01

    When reading electronic books on handheld devices, content sometimes should be reflowed and recomposed to adapt for small-screen mobile devices. According to people's reading practice, it is reasonable to reflow the text content based on paragraphs. Hence, this paper addresses the requirement and proposes a set of novel methods on paragraph recognition for electronic books in PDF. The proposed methods consist of three steps, namely, physical structure analysis, paragraph segmentation, and reading order detection. We make use of locally ordered property of PDF documents and layout style of books to improve traditional page recognition results. In addition, we employ the optimal matching of Bipartite Graph technology to detect paragraphs' reading order. Experiments show that our methods achieve high accuracy. It is noteworthy that, the research has been applied in a commercial software package for Chinese E-book production.

  18. A consistent transported PDF model for treating differential molecular diffusion

    Science.gov (United States)

    Wang, Haifeng; Zhang, Pei

    2016-11-01

    Differential molecular diffusion is a fundamentally significant phenomenon in all multi-component turbulent reacting or non-reacting flows caused by the different rates of molecular diffusion of energy and species concentrations. In the transported probability density function (PDF) method, the differential molecular diffusion can be treated by using a mean drift model developed by McDermott and Pope. This model correctly accounts for the differential molecular diffusion in the scalar mean transport and yields a correct DNS limit of the scalar variance production. The model, however, misses the molecular diffusion term in the scalar variance transport equation, which yields an inconsistent prediction of the scalar variance in the transported PDF method. In this work, a new model is introduced to remedy this problem that can yield a consistent scalar variance prediction. The model formulation along with its numerical implementation is discussed, and the model validation is conducted in a turbulent mixing layer problem.

  19. Theoretical issues in PDF determination and associated uncertainties

    CERN Document Server

    Ball, Richard D.; Del Debbio, Luigi; Forte, Stefano; Guffanti, Alberto; Rojo, Juan; Ubiali, Maria

    2013-01-01

    We study several sources of theoretical uncertainty in the determination of parton distributions (PDFs) which may affect current PDF sets used for precision physics at the Large Hadron Collider, and explain discrepancies between them. We consider in particular the use of fixed-flavor versus variable-flavor number renormalization schemes, higher twist corrections, and nuclear corrections. We perform our study in the framework of the NNPDF2.3 global PDF determination, by quantifying in each case the impact of different theoretical assumptions on the output PDFs. We also study in each case the implications for benchmark cross sections at the LHC. We find that the impact in a global fit of a fixed-flavor number scheme is substantial, the impact of higher twists is negligible, and the impact of nuclear corrections is moderate and circumscribed.

  20. 1089.pdf | jul2014 | jess | Indian Academy of Sciences

    Indian Academy of Sciences (India)

    Home; jess; jul2014; 1089.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. 29th Mid-year meeting. Posted on 19 January 2018. The 29th Mid-year meeting of the Academy will be held from ...

  1. The pdf approach to turbulent polydispersed two-phase flows

    Science.gov (United States)

    Minier, Jean-Pierre; Peirano, Eric

    2001-10-01

    The purpose of this paper is to develop a probabilistic approach to turbulent polydispersed two-phase flows. The two-phase flows considered are composed of a continuous phase, which is a turbulent fluid, and a dispersed phase, which represents an ensemble of discrete particles (solid particles, droplets or bubbles). Gathering the difficulties of turbulent flows and of particle motion, the challenge is to work out a general modelling approach that meets three requirements: to treat accurately the physically relevant phenomena, to provide enough information to address issues of complex physics (combustion, polydispersed particle flows, …) and to remain tractable for general non-homogeneous flows. The present probabilistic approach models the statistical dynamics of the system and consists in simulating the joint probability density function (pdf) of a number of fluid and discrete particle properties. A new point is that both the fluid and the particles are included in the pdf description. The derivation of the joint pdf model for the fluid and for the discrete particles is worked out in several steps. The mathematical properties of stochastic processes are first recalled. The various hierarchies of pdf descriptions are detailed and the physical principles that are used in the construction of the models are explained. The Lagrangian one-particle probabilistic description is developed first for the fluid alone, then for the discrete particles and finally for the joint fluid and particle turbulent systems. In the case of the probabilistic description for the fluid alone or for the discrete particles alone, numerical computations are presented and discussed to illustrate how the method works in practice and the kind of information that can be extracted from it. Comments on the current modelling state and propositions for future investigations which try to link the present work with other ideas in physics are made at the end of the paper.

  2. 630.pdf | sep102009 | currsci | Indian Academy of Sciences

    Indian Academy of Sciences (India)

    Home; currsci; sep102009; 630.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. 29th Mid-year meeting. Posted on 19 January 2018. The 29th Mid-year meeting of the Academy will be held ...

  3. A Electronic Map Data Model Based on PDF

    Science.gov (United States)

    Zhou, Xiaodong; Yang, Chuncheng; Meng, Nina; Peng, Peng

    2018-05-01

    In this paper, we proposed the PDFEMAP (PDF electronic map) that is a kind of new electronic map products aiming at the current situation and demand of the use of electronic map products. Firstly gives the definition and characteristics of PDFEMAP, followed by a detailed description of the data model and method for generating PDFEMAP, and finally expounds application modes of the PDFEMAP which feasibility and effectiveness are verified.

  4. 1417.pdf | nov252004 | currsci | Indian Academy of Sciences

    Indian Academy of Sciences (India)

    Home; currsci; nov252004; 1417.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. 29th Mid-year meeting. Posted on 19 January 2018. The 29th Mid-year meeting of the Academy will be ...

  5. 37.pdf | jan102006 | currsci | Indian Academy of Sciences

    Indian Academy of Sciences (India)

    Home; currsci; jan102006; 37.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. 29th Mid-year meeting. Posted on 19 January 2018. The 29th Mid-year meeting of the Academy will be held ...

  6. ilc-25.pdf | dec2005 | jess | Indian Academy of Sciences

    Indian Academy of Sciences (India)

    Home; jess; dec2005; ilc-25.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. 29th Mid-year meeting. Posted on 19 January 2018. The 29th Mid-year meeting of the Academy will be held ...

  7. 867.pdf | aug2012 | jess | Indian Academy of Sciences

    Indian Academy of Sciences (India)

    Home; jess; aug2012; 867.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. 29th Mid-year meeting. Posted on 19 January 2018. The 29th Mid-year meeting of the Academy will be held from ...

  8. 577.pdf | 10sep2010 | currsci | Indian Academy of Sciences

    Indian Academy of Sciences (India)

    Home; currsci; 10sep2010; 577.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. 29th Mid-year meeting. Posted on 19 January 2018. The 29th Mid-year meeting of the Academy will be held ...

  9. 897.pdf | apr102004 | currsci | Indian Academy of Sciences

    Indian Academy of Sciences (India)

    Home; currsci; apr102004; 897.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. 29th Mid-year meeting. Posted on 19 January 2018. The 29th Mid-year meeting of the Academy will be held ...

  10. Galaxy formation

    International Nuclear Information System (INIS)

    Silk, J.; Di Cintio, A.; Dvorkin, I.

    2014-01-01

    Galaxy formation is at the forefront of observation and theory in cosmology. An improved understanding is essential for improving our knowledge both of the cosmological parameters, of the contents of the universe, and of our origins. In these lectures intended for graduate students, galaxy formation theory is reviewed and confronted with recent observational issues. In lecture 1, the following topics are presented: star formation considerations, including IMF, star formation efficiency and star formation rate, the origin of the galaxy luminosity function, and feedback in dwarf galaxies. In lecture 2, we describe formation of disks and massive spheroids, including the growth of supermassive black holes, negative feedback in spheroids, the AGN-star formation connection, star formation rates at high redshift and the baryon fraction in galaxies.

  11. A time dependent mixing model to close PDF equations for transport in heterogeneous aquifers

    Science.gov (United States)

    Schüler, L.; Suciu, N.; Knabner, P.; Attinger, S.

    2016-10-01

    Probability density function (PDF) methods are a promising alternative to predicting the transport of solutes in groundwater under uncertainty. They make it possible to derive the evolution equations of the mean concentration and the concentration variance, used in moment methods. The mixing model, describing the transport of the PDF in concentration space, is essential for both methods. Finding a satisfactory mixing model is still an open question and due to the rather elaborate PDF methods, a difficult undertaking. Both the PDF equation and the concentration variance equation depend on the same mixing model. This connection is used to find and test an improved mixing model for the much easier to handle concentration variance. Subsequently, this mixing model is transferred to the PDF equation and tested. The newly proposed mixing model yields significantly improved results for both variance modelling and PDF modelling.

  12. Sparse PDF Volumes for Consistent Multi-Resolution Volume Rendering

    KAUST Repository

    Sicat, Ronell Barrera

    2014-12-31

    This paper presents a new multi-resolution volume representation called sparse pdf volumes, which enables consistent multi-resolution volume rendering based on probability density functions (pdfs) of voxel neighborhoods. These pdfs are defined in the 4D domain jointly comprising the 3D volume and its 1D intensity range. Crucially, the computation of sparse pdf volumes exploits data coherence in 4D, resulting in a sparse representation with surprisingly low storage requirements. At run time, we dynamically apply transfer functions to the pdfs using simple and fast convolutions. Whereas standard low-pass filtering and down-sampling incur visible differences between resolution levels, the use of pdfs facilitates consistent results independent of the resolution level used. We describe the efficient out-of-core computation of large-scale sparse pdf volumes, using a novel iterative simplification procedure of a mixture of 4D Gaussians. Finally, our data structure is optimized to facilitate interactive multi-resolution volume rendering on GPUs.

  13. PDF and cAMP enhance PER stability in Drosophila clock neurons

    Science.gov (United States)

    Li, Yue; Guo, Fang; Shen, James; Rosbash, Michael

    2014-01-01

    The neuropeptide PDF is important for Drosophila circadian rhythms: pdf01 (pdf-null) animals are mostly arrhythmic or short period in constant darkness and have an advanced activity peak in light–dark conditions. PDF contributes to the amplitude, synchrony, as well as the pace of circadian rhythms within clock neurons. PDF is known to increase cAMP levels in PDR receptor (PDFR)-containing neurons. However, there is no known connection of PDF or of cAMP with the Drosophila molecular clockworks. We discovered that the mutant period gene perS ameliorates the phenotypes of pdf-null flies. The period protein (PER) is a well-studied repressor of clock gene transcription, and the perS protein (PERS) has a markedly short half-life. The result therefore suggests that the PDF-mediated increase in cAMP might lengthen circadian period by directly enhancing PER stability. Indeed, increasing cAMP levels and cAMP-mediated protein kinase A (PKA) activity stabilizes PER, in S2 tissue culture cells and in fly circadian neurons. Adding PDF to fly brains in vitro has a similar effect. Consistent with these relationships, a light pulse causes more prominent PER degradation in pdf01 circadian neurons than in wild-type neurons. The results indicate that PDF contributes to clock neuron synchrony by increasing cAMP and PKA, which enhance PER stability and decrease clock speed in intrinsically fast-paced PDFR-containing clock neurons. We further suggest that the more rapid degradation of PERS bypasses PKA regulation and makes the pace of clock neurons more uniform, allowing them to avoid much of the asynchrony caused by the absence of PDF. PMID:24707054

  14. 0011-0030.How to make an abstract in IEEE Format for ...

    Indian Academy of Sciences (India)

    Home; public; Volumes; reso; 021; 01; 0011-0030.How to make an abstract in IEEE Format for AvishkarMulticultural Night in IEEE R10 Student Congress 2009Performances.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook ...

  15. PDF modeling of turbulent flows on unstructured grids

    Science.gov (United States)

    Bakosi, Jozsef

    In probability density function (PDF) methods of turbulent flows, the joint PDF of several flow variables is computed by numerically integrating a system of stochastic differential equations for Lagrangian particles. Because the technique solves a transport equation for the PDF of the velocity and scalars, a mathematically exact treatment of advection, viscous effects and arbitrarily complex chemical reactions is possible; these processes are treated without closure assumptions. A set of algorithms is proposed to provide an efficient solution of the PDF transport equation modeling the joint PDF of turbulent velocity, frequency and concentration of a passive scalar in geometrically complex configurations. An unstructured Eulerian grid is employed to extract Eulerian statistics, to solve for quantities represented at fixed locations of the domain and to track particles. All three aspects regarding the grid make use of the finite element method. Compared to hybrid methods, the current methodology is stand-alone, therefore it is consistent both numerically and at the level of turbulence closure without the use of consistency conditions. Since both the turbulent velocity and scalar concentration fields are represented in a stochastic way, the method allows for a direct and close interaction between these fields, which is beneficial in computing accurate scalar statistics. Boundary conditions implemented along solid bodies are of the free-slip and no-slip type without the need for ghost elements. Boundary layers at no-slip boundaries are either fully resolved down to the viscous sublayer, explicitly modeling the high anisotropy and inhomogeneity of the low-Reynolds-number wall region without damping or wall-functions or specified via logarithmic wall-functions. As in moment closures and large eddy simulation, these wall-treatments provide the usual trade-off between resolution and computational cost as required by the given application. Particular attention is focused on

  16. Iron enhances the peptidyl deformylase activity and biofilm formation in Staphylococcus aureus.

    Science.gov (United States)

    Swarupa, Vimjam; Chaudhury, Abhijit; Sarma, Potukuchi Venkata Gurunadha Krishna

    2018-01-01

    Staphylococcus aureus plays a major role in persistent infections and many of these species form structured biofilms on different surfaces which is accompanied by changes in gene expression profiles. Further, iron supplementation plays a critical role in the regulation of several protein(s)/enzyme function, which all aid in the development of active bacterial biofilms. It is well known that for each protein, deformylation is the most crucial step in biosynthesis and is catalyzed by peptidyl deformylase (PDF). Thus, the aim of the current study is to understand the role of iron in biofilm formation and deformylase activity of PDF. Hence, the PDF gene of S. aureus ATCC12600 was PCR amplified using specific primers and sequenced, followed by cloning and expression in Escherichia coli DH5α. The deformylase activity of the purified recombinant PDF was measured in culture supplemented with/without iron where the purified rPDF showed K m of 1.3 mM and V max of 0.035 mM/mg/min, which was close to the native PDF ( K m  = 1.4 mM, V max  = 0.030 mM/mg/min). Interestingly, the K m decreased and PDF activity increased when the culture was supplemented with iron, corroborating with qPCR results showing 100- to 150-fold more expression compared to control in S. aureus and its drug-resistant strains. Further biofilm-forming units (BU) showed an incredible increase (0.42 ± 0.005 to 6.3 ± 0.05 BU), i.e., almost 15-fold elevation in anaerobic conditions, indicating the significance of iron in S. aureus biofilms.

  17. A multi-scalar PDF approach for LES of turbulent spray combustion

    Science.gov (United States)

    Raman, Venkat; Heye, Colin

    2011-11-01

    A comprehensive joint-scalar probability density function (PDF) approach is proposed for large eddy simulation (LES) of turbulent spray combustion and tests are conducted to analyze the validity and modeling requirements. The PDF method has the advantage that the chemical source term appears closed but requires models for the small scale mixing process. A stable and consistent numerical algorithm for the LES/PDF approach is presented. To understand the modeling issues in the PDF method, direct numerical simulation of a spray flame at three different fuel droplet Stokes numbers and an equivalent gaseous flame are carried out. Assumptions in closing the subfilter conditional diffusion term in the filtered PDF transport equation are evaluated for various model forms. In addition, the validity of evaporation rate models in high Stokes number flows is analyzed.

  18. Research and Teaching: Exploring the Use of an Online Quiz Game to Provide Formative Feedback in a Large-Enrollment, Introductory Biochemistry Course

    Science.gov (United States)

    Milner, Rachel; Parrish, Jonathan; Wright, Adrienne; Gnarpe, Judy; Keenan, Louanne

    2015-01-01

    In a large-enrollment, introductory biochemistry course for nonmajors, the authors provide students with formative feedback through practice questions in PDF format. Recently, they investigated possible benefits of providing the practice questions via an online game (Brainspan). Participants were randomly assigned to either the online game group…

  19. Computation of a turbulent channel flow using PDF method

    International Nuclear Information System (INIS)

    Minier, J.P.; Pozorski, J.

    1997-05-01

    The purpose of the present paper is to present an analysis of a PDF model (Probability Density Function) and an illustration of the possibilities offered by such a method for a high-Reynolds turbulent channel flow. The first part presents the principles of the PDF approach and the introduction of stochastic processes along with a Lagrangian point of view. The model retained is the one put forward by Pope (1991) and includes evolution equations for location, velocity and dissipation of a large number of particles. Wall boundary conditions are then developed for particles. These conditions allow statistical results of the logarithmic region to be correctly reproduced. Simulation of non-homogeneous flows require a pressure-gradient algorithm which is briefly described. Developments are validated by analysing numerical predictions with respect to Comte Bellot experimental data (1965) on a channel flow. This example illustrates the ability of the approach to simulate wall-bounded flows and to provide detailed information such as skewness and flatness factors. (author)

  20. The PDF method for Lagrangian two-phase flow simulations

    International Nuclear Information System (INIS)

    Minier, J.P.; Pozorski, J.

    1996-04-01

    A recent turbulence model put forward by Pope (1991) in the context of PDF modelling has been used. In this approach, the one-point joint velocity-dissipation pdf equation is solved by simulating the instantaneous behaviour of a large number of Lagrangian fluid particles. Closure of the evolution equations of these Lagrangian particles is based on stochastic models and more specifically on diffusion processes. Such models are of direct use for two-phase flow modelling where the so-called fluid seen by discrete inclusions has to be modelled. Full Lagrangian simulations have been performed for shear-flows. It is emphasized that this approach gives far more information than traditional turbulence closures (such as the K-ε model) and therefore can be very useful for situations involving complex physics. It is also believed that the present model represents the first step towards a complete Lagrangian-Lagrangian model for dispersed two-phase flow problems. (authors). 21 refs., 6 figs

  1. Formative (measurement)

    NARCIS (Netherlands)

    Fassott, G.; Henseler, Jörg; Cooper, C.; Lee, N.; Farrell, A.

    2015-01-01

    When using measurement models with multiple indicators, researchers need to decide about the epistemic relationship between the latent variable and its indicators. In this article, we describe the nature, the estimation, the characteristics, and the validity assessment of formative measurement

  2. Heat shock factors HsfB1 and HsfB2b are involved in the regulation of Pdf1.2 expression and pathogen resistance in Arabidopsis.

    Science.gov (United States)

    Kumar, Mukesh; Busch, Wolfgang; Birke, Hannah; Kemmerling, Birgit; Nürnberger, Thorsten; Schöffl, Friedrich

    2009-01-01

    In order to assess the functional roles of heat stress-induced class B-heat shock factors in Arabidopsis, we investigated T-DNA knockout mutants of AtHsfB1 and AtHsfB2b. Micorarray analysis of double knockout hsfB1/hsfB2b plants revealed as strong an up-regulation of the basal mRNA-levels of the defensin genes Pdf1.2a/b in mutant plants. The Pdf expression was further enhanced by jasmonic acid treatment or infection with the necrotrophic fungus Alternaria brassicicola. The single mutant hsfB2b and the double mutant hsfB1/B2b were significantly improved in disease resistance after A. brassicicola infection. There was no indication for a direct interaction of Hsf with the promoter of Pdf1.2, which is devoid of perfect HSE consensus Hsf-binding sequences. However, changes in the formation of late HsfA2-dependent HSE binding were detected in hsfB1/B2b plants. This suggests that HsfB1/B2b may interact with class A-Hsf in regulating the shut-off of the heat shock response. The identification of Pdf genes as targets of Hsf-dependent negative regulation is the first evidence for an interconnection of Hsf in the regulation of biotic and abiotic responses.

  3. Converting Taxonomic Descriptions to New Digital Formats

    Directory of Open Access Journals (Sweden)

    Hong Cui

    2008-01-01

    Full Text Available Abstract.--The majority of taxonomic descriptions is currently in print format. The majority of digital descriptions are in formats such as DOC, HTML, or PDF and for human readers. These formats do not convey rich semantics in taxonomic descriptions for computer-aided process. Newer digital formats such as XML and RDF accommodate semantic annotations that allow computers to process the rich semantics on human's behalf, thus open up opportunities for a wide range of innovative usages of taxonomic descriptions, such as searching in more precise and flexible ways, integrating with gnomic and geographic information, generating taxonomic keys automatically, and text data mining and information visualization etc. This paper discusses the challenges in automated conversion of multiple collections of descriptions to XML format and reports an automated system, MARTT. MARTT is a machine-learning system that makes use of training examples to tag new descriptions into XML format. A number of utilities are implemented as solutions to the challenges. The utilities are used to reduce the effort for training example preparation, to facilitate the creation of a comprehensive schema, and to predict system performance on a new collection of descriptions. The system has been tested with several plant and alga taxonomic publications including Flora of China and Flora of North America.

  4. Low temperature formation of CuIn{sub 1−x}Ga{sub x}Se{sub 2} solar cell absorbers by all printed multiple species nanoparticulate Se + Cu-In + Cu-Ga precursors

    Energy Technology Data Exchange (ETDEWEB)

    Möckel, Stefan A., E-mail: Stefan.A.Moeckel@FAU.de [Department of Materials Science, Chair of Materials for Electronics and Energy Technology, Friedrich-Alexander-Universität Erlangen-Nürnberg (FAU), Martensstr, 7, 91058 Erlangen (Germany); Wernicke, Tobias; Arzig, Matthias; Köder, Philipp [Department of Materials Science, Chair of Materials for Electronics and Energy Technology, Friedrich-Alexander-Universität Erlangen-Nürnberg (FAU), Martensstr, 7, 91058 Erlangen (Germany); Brandl, Marco [Chair for Crystallography and Structural Physics, Friedrich-Alexander-Universität Erlangen-Nürnberg (FAU), Staudtstr. 3, 91058 Erlangen (Germany); Ahmad, Rameez; Distaso, Monica; Peukert, Wolfgang [Institute of Particle Technology, Friedrich-Alexander-Universität Erlangen-Nürnberg (FAU), Cauerstr. 4, 91058 Erlangen (Germany); Hock, Rainer [Chair for Crystallography and Structural Physics, Friedrich-Alexander-Universität Erlangen-Nürnberg (FAU), Staudtstr. 3, 91058 Erlangen (Germany); Wellmann, Peter J. [Department of Materials Science, Chair of Materials for Electronics and Energy Technology, Friedrich-Alexander-Universität Erlangen-Nürnberg (FAU), Martensstr, 7, 91058 Erlangen (Germany)

    2015-05-01

    In this work an all nanoparticulate precursor for application in Cu(In{sub 1−x}Ga{sub x})Se{sub 2} solar cell absorbers is presented. Binary Cu-In nanoparticles, Cu-Ga powder and elemental Se nanoparticles were mixed in dispersion and deposited on Mo-coated substrates. Research was focused on Cu(In{sub 1−x}Ga{sub x})Se{sub 2} layer formation kinetics, phase composition characterised by differential scanning calorimetry and in-situ X-ray diffraction (XRD). Furthermore phase composition and morphology were studied by ex-situ XRD, Raman spectroscopy and scanning electron microscopy. The results revealed a fast consumption of the precursor and the formation of CuInSe{sub 2} below 340 °C. Binary secondary phases were not observed at any temperature. - Highlights: • All printable precursor for CIGSe • Formation of Ga droplets • Complete consumption below 340 °C.

  5. AsteriX: a Web server to automatically extract ligand coordinates from figures in PDF articles.

    Science.gov (United States)

    Lounnas, V; Vriend, G

    2012-02-27

    Coordinates describing the chemical structures of small molecules that are potential ligands for pharmaceutical targets are used at many stages of the drug design process. The coordinates of the vast majority of ligands can be obtained from either publicly accessible or commercial databases. However, interesting ligands sometimes are only available from the scientific literature, in which case their coordinates need to be reconstructed manually--a process that consists of a series of time-consuming steps. We present a Web server that helps reconstruct the three-dimensional (3D) coordinates of ligands for which a two-dimensional (2D) picture is available in a PDF file. The software, called AsteriX, analyses every picture contained in the PDF file and attempts to determine automatically whether or not it contains ligands. Areas in pictures that may contain molecular structures are processed to extract connectivity and atom type information that allow coordinates to be subsequently reconstructed. The AsteriX Web server was tested on a series of articles containing a large diversity in graphical representations. In total, 88% of 3249 ligand structures present in the test set were identified as chemical diagrams. Of these, about half were interpreted correctly as 3D structures, and a further one-third required only minor manual corrections. It is principally impossible to always correctly reconstruct 3D coordinates from pictures because there are many different protocols for drawing a 2D image of a ligand, but more importantly a wide variety of semantic annotations are possible. The AsteriX Web server therefore includes facilities that allow the users to augment partial or partially correct 3D reconstructions. All 3D reconstructions are submitted, checked, and corrected by the users domain at the server and are freely available for everybody. The coordinates of the reconstructed ligands are made available in a series of formats commonly used in drug design research. The

  6. Cement Formation

    DEFF Research Database (Denmark)

    Telschow, Samira; Jappe Frandsen, Flemming; Theisen, Kirsten

    2012-01-01

    Cement production has been subject to several technological changes, each of which requires detailed knowledge about the high multiplicity of processes, especially the high temperature process involved in the rotary kiln. This article gives an introduction to the topic of cement, including...... an overview of cement production, selected cement properties, and clinker phase relations. An extended summary of laboratory-scale investigations on clinkerization reactions, the most important reactions in cement production, is provided. Clinker formations by solid state reactions, solid−liquid and liquid......−liquid reactions are discussed, as are the influences of particles sizes on clinker phase formation. Furthermore, a mechanism for clinker phase formation in an industrial rotary kiln reactor is outlined....

  7. Star formation

    International Nuclear Information System (INIS)

    Woodward, P.R.

    1978-01-01

    Theoretical models of star formation are discussed beginning with the earliest stages and ending in the formation of rotating, self-gravitating disks or rings. First a model of the implosion of very diffuse gas clouds is presented which relies upon a shock at the edge of a galactic spiral arm to drive the implosion. Second, models are presented for the formation of a second generation of massive stars in such a cloud once a first generation has formed. These models rely on the ionizing radiation from massive stars or on the supernova shocks produced when these stars explode. Finally, calculations of the gravitational collapse of rotating clouds are discussed with special focus on the question of whether rotating disks or rings are the result of such a collapse. 65 references

  8. Galaxy Formation

    DEFF Research Database (Denmark)

    Sparre, Martin

    Galaxy formation is an enormously complex discipline due to the many physical processes that play a role in shaping galaxies. The objective of this thesis is to study galaxy formation with two different approaches: First, numerical simulations are used to study the structure of dark matter and how...... galaxies form stars throughout the history of the Universe, and secondly it is shown that observations of gamma-ray bursts (GRBs) can be used to probe galaxies with active star formation in the early Universe. A conclusion from the hydrodynamical simulations is that the galaxies from the stateof...... is important, since it helps constraining chemical evolution models at high redshift. A new project studying how the population of galaxies hosting GRBs relate to other galaxy population is outlined in the conclusion of this thesis. The core of this project will be to quantify how the stellar mass function...

  9. Comet formation

    Science.gov (United States)

    Blum, J.

    2014-07-01

    There has been vast progress in our understanding of planetesimal formation over the past decades, owing to a number of laboratory experiments as well as to refined models of dust and ice agglomeration in protoplanetary disks. Coagulation rapidly forms cm-sized ''pebbles'' by direct sticking in collisions at low velocities (Güttler et al. 2010; Zsom et al. 2010). For the further growth, two model approaches are currently being discussed: (1) Local concentration of pebbles in nebular instabilities until gravitational instability occurs (Johansen et al. 2007). (2) A competition between fragmentation and mass transfer in collisions among the dusty bodies, in which a few ''lucky winners'' make it to planetesimal sizes (Windmark et al. 2012a,b; Garaud et al. 2013). Predictions of the physical properties of the resulting bodies in both models allow a distinction of the two formation scenarios of planetesimals. In particular, the tensile strength (i.e, the inner cohesion) of the planetesimals differ widely between the two models (Skorov & Blum 2012; Blum et al. 2014). While model (1) predicts tensile strengths on the order of ˜ 1 Pa, model (2) results in rather compactified dusty bodies with tensile strengths in the kPa regime. If comets are km-sized survivors of the planetesimal-formation era, they should in principle hold the secret of their formation process. Water ice is the prime volatile responsible for the activity of comets. Thermophysical models of the heat and mass transport close to the comet-nucleus surface predict water-ice sublimation temperatures that relate to maximum sublimation pressures well below the kPa regime predicted for formation scenario (2). Model (1), however, is in agreement with the observed dust and gas activity of comets. Thus, a formation scenario for cometesimals involving gravitational instability is favored (Blum et al. 2014).

  10. Joint PDF modelling of turbulent flow and dispersion in an urban street canyon

    OpenAIRE

    Bakosi, J.; Franzese, P.; Boybeyi, Z.

    2010-01-01

    The joint probability density function (PDF) of turbulent velocity and concentration of a passive scalar in an urban street canyon is computed using a newly developed particle-in-cell Monte Carlo method. Compared to moment closures, the PDF methodology provides the full one-point one-time PDF of the underlying fields containing all higher moments and correlations. The small-scale mixing of the scalar released from a concentrated source at the street level is modelled by the interaction by exc...

  11. Propositions for a PDF model based on fluid particle acceleration

    International Nuclear Information System (INIS)

    Minier, J.P.; Pozorski, J.

    1997-05-01

    This paper describes theoretical propositions to model the acceleration of a fluid particle in a turbulent flow. Such a model is useful for the PDF approach to turbulent reactive flows as well as for the Lagrangian modelling of two-phase flows. The model developed here draws from ideas already put forward by Sawford but which are generalized to the case of non-homogeneous flows. The model is built so as to revert continuously to Pope's model, which uses a Langevin equation for particle velocities, when the Reynolds number becomes very high. The derivation is based on the technique of fast variable elimination. This technique allow a careful analysis of the relations between different levels of modelling. It also allows to address certain problems in a more rigorous way. In particular, application of this technique shows that models presently used can in principle simulate bubbly flows including the pressure-gradient and added-mass forces. (author)

  12. Biostratigraphy of the Lower Cretaceous Schrambach Formation on the classical locality of Schrambachgraben (Northern Calcareous Alps, Salzburg Area)

    Czech Academy of Sciences Publication Activity Database

    Boorová, D.; Skupien, P.; Vašíček, Zdeněk

    2014-01-01

    Roč. 90, č. 1 (2014), s. 89-131 ISSN 1214-1119 Institutional support: RVO:68145535 Keywords : biostratigraphy * Schrambach and Rossfeld formations * Berriasian, Valanginian * calcareous and non-calcareous dinoflagellata * ammonites Subject RIV: DB - Geology ; Mineralogy Impact factor: 1.515, year: 2014 http://www.geology.cz/bulletin/fulltext/1479_Boorova_in_press.pdf

  13. Formatting Open Science: agilely creating multiple document formats for academic manuscripts with Pandoc Scholar

    Directory of Open Access Journals (Sweden)

    Albert Krewinkel

    2017-05-01

    Full Text Available The timely publication of scientific results is essential for dynamic advances in science. The ubiquitous availability of computers which are connected to a global network made the rapid and low-cost distribution of information through electronic channels possible. New concepts, such as Open Access publishing and preprint servers are currently changing the traditional print media business towards a community-driven peer production. However, the cost of scientific literature generation, which is either charged to readers, authors or sponsors, is still high. The main active participants in the authoring and evaluation of scientific manuscripts are volunteers, and the cost for online publishing infrastructure is close to negligible. A major time and cost factor is the formatting of manuscripts in the production stage. In this article we demonstrate the feasibility of writing scientific manuscripts in plain markdown (MD text files, which can be easily converted into common publication formats, such as PDF, HTML or EPUB, using Pandoc. The simple syntax of Markdown assures the long-term readability of raw files and the development of software and workflows. We show the implementation of typical elements of scientific manuscripts—formulas, tables, code blocks and citations—and present tools for editing, collaborative writing and version control. We give an example on how to prepare a manuscript with distinct output formats, a DOCX file for submission to a journal, and a LATEX/PDF version for deposition as a PeerJ preprint. Further, we implemented new features for supporting ‘semantic web’ applications, such as the ‘journal article tag suite’—JATS, and the ‘citation typing ontology’—CiTO standard. Reducing the work spent on manuscript formatting translates directly to time and cost savings for writers, publishers, readers and sponsors. Therefore, the adoption of the MD format contributes to the agile production of open science

  14. An investigation into the use of polymer blends to improve the printability of and regulate drug release from pharmaceutical solid dispersions prepared via fused deposition modeling (FDM) 3D printing.

    Science.gov (United States)

    Alhijjaj, Muqdad; Belton, Peter; Qi, Sheng

    2016-11-01

    FDM 3D printing has been recently attracted increasing research efforts towards the production of personalized solid oral formulations. However, commercially available FDM printers are extremely limited with regards to the materials that can be processed to few types of thermoplastic polymers, which often may not be pharmaceutically approved materials nor ideal for optimizing dosage form performance of poor soluble compounds. This study explored the use of polymer blends as a formulation strategy to overcome this processability issue and to provide adjustable drug release rates from the printed dispersions. Solid dispersions of felodipine, the model drug, were successfully fabricated using FDM 3D printing with polymer blends of PEG, PEO and Tween 80 with either Eudragit E PO or Soluplus. As PVA is one of most widely used polymers in FDM 3D printing, a PVA based solid dispersion was used as a benchmark to compare the polymer blend systems to in terms of processability. The polymer blends exhibited excellent printability and were suitable for processing using a commercially available FDM 3D printer. With 10% drug loading, all characterization data indicated that the model drug was molecularly dispersed in the matrices. During in vitro dissolution testing, it was clear that the disintegration behavior of the formulations significantly influenced the rates of drug release. Eudragit EPO based blend dispersions showed bulk disintegration; whereas the Soluplus based blends showed the 'peeling' style disintegration of strip-by-strip. The results indicated that interplay of the miscibility between excipients in the blends, the solubility of the materials in the dissolution media and the degree of fusion between the printed strips during FDM process can be used to manipulate the drug release rate of the dispersions. This brings new insight into the design principles of controlled release formulations using FDM 3D printing. Copyright © 2016 Elsevier B.V. All rights reserved.

  15. Structural reconstruction of the catalytic center of LiPDF through multiple scattering calculation with MXAN

    Science.gov (United States)

    Guo, Xiaoyun; Chu, Wangsheng; Ma, Sixuan; Gong, Weimin; Benfatto, Maurizio; Hu, Tiandou; Xie, Yaning; Wu, ZiYu

    2006-11-01

    Peptide deformylase (PDF, EC 3.5.1.27) is essential for the normal growth of eubacterium but not for mammalians. Recently, PDF has been studied as a target for new antibiotics. In this paper, X-ray absorption spectroscopy was employed to determine the local structure around the zinc ion of PDF from Leptospira Interrogans in dry powder, because it is very difficult to obtain the crystallized sample of LiPDF. We performed X-ray absorption near edge structure (XANES) calculation and reconstructed successfully the local geometry of the active center, and the results from calculations show that a water molecule (Wat1) has moved towards the zinc ion and lies in the distance range to coordinate with the zinc ion weakly. In addition, the sensitivity of theoretical spectra to the different ligand bodies was evaluated in terms of goodness-of-fit.

  16. Structural reconstruction of the catalytic center of LiPDF through multiple scattering calculation with MXAN

    Energy Technology Data Exchange (ETDEWEB)

    Guo Xiaoyun [Beijing Synchrotron Radiation Facility, Institute of High Energy Physics, CAS, 100049 Beijing (China); School of Life Science, Key Laboratory of Structural Biology, University of Science and Technology of China, 230026 Hefei, Anhui (China); Chu Wangsheng [Beijing Synchrotron Radiation Facility, Institute of High Energy Physics, CAS, 100049 Beijing (China); Department of Physics, University of Science and Technology of China, 230026 Hefei, Anhui (China); Ma Sixuan [Beijing Synchrotron Radiation Facility, Institute of High Energy Physics, CAS, 100049 Beijing (China); Gong Weimin [National Laboratory of Biomacromolecules, Institute of Biophysics, Chinese Academy of Sciences, 100101 Beijing (China); Benfatto, Maurizio [Instituto Nazionale di Fisica Nucleare, Laboratori Nazionali di Frascati, P.O. Box 13, 00044 Frascati (Italy); Hu Tiandou [Beijing Synchrotron Radiation Facility, Institute of High Energy Physics, CAS, 100049 Beijing (China); Xie Yaning [Beijing Synchrotron Radiation Facility, Institute of High Energy Physics, CAS, 100049 Beijing (China); Wu Ziyu [Beijing Synchrotron Radiation Facility, Institute of High Energy Physics, CAS, 100049 Beijing (China) and Instituto Nazionale di Fisica Nucleare, Laboratori Nazionali di Frascati, P.O. Box 13, 00044 Frascati (Italy)]. E-mail: wuzy@mail.ihep.ac.cn

    2006-11-15

    Peptide deformylase (PDF, EC 3.5.1.27) is essential for the normal growth of eubacterium but not for mammalians. Recently, PDF has been studied as a target for new antibiotics. In this paper, X-ray absorption spectroscopy was employed to determine the local structure around the zinc ion of PDF from Leptospira Interrogans in dry powder, because it is very difficult to obtain the crystallized sample of LiPDF. We performed X-ray absorption near edge structure (XANES) calculation and reconstructed successfully the local geometry of the active center, and the results from calculations show that a water molecule (Wat1) has moved towards the zinc ion and lies in the distance range to coordinate with the zinc ion weakly. In addition, the sensitivity of theoretical spectra to the different ligand bodies was evaluated in terms of goodness-of-fit.

  17. Structural reconstruction of the catalytic center of LiPDF through multiple scattering calculation with MXAN

    International Nuclear Information System (INIS)

    Guo Xiaoyun; Chu Wangsheng; Ma Sixuan; Gong Weimin; Benfatto, Maurizio; Hu Tiandou; Xie Yaning; Wu Ziyu

    2006-01-01

    Peptide deformylase (PDF, EC 3.5.1.27) is essential for the normal growth of eubacterium but not for mammalians. Recently, PDF has been studied as a target for new antibiotics. In this paper, X-ray absorption spectroscopy was employed to determine the local structure around the zinc ion of PDF from Leptospira Interrogans in dry powder, because it is very difficult to obtain the crystallized sample of LiPDF. We performed X-ray absorption near edge structure (XANES) calculation and reconstructed successfully the local geometry of the active center, and the results from calculations show that a water molecule (Wat1) has moved towards the zinc ion and lies in the distance range to coordinate with the zinc ion weakly. In addition, the sensitivity of theoretical spectra to the different ligand bodies was evaluated in terms of goodness-of-fit

  18. Evaluation of a Consistent LES/PDF Method Using a Series of Experimental Spray Flames

    Science.gov (United States)

    Heye, Colin; Raman, Venkat

    2012-11-01

    A consistent method for the evolution of the joint-scalar probability density function (PDF) transport equation is proposed for application to large eddy simulation (LES) of turbulent reacting flows containing evaporating spray droplets. PDF transport equations provide the benefit of including the chemical source term in closed form, however, additional terms describing LES subfilter mixing must be modeled. The recent availability of detailed experimental measurements provide model validation data for a wide range of evaporation rates and combustion regimes, as is well-known to occur in spray flames. In this work, the experimental data will used to investigate the impact of droplet mass loading and evaporation rates on the subfilter scalar PDF shape in comparison with conventional flamelet models. In addition, existing model term closures in the PDF transport equations are evaluated with a focus on their validity in the presence of regime changes.

  19. The impact of the photon PDF and electroweak corrections on t anti t distributions

    International Nuclear Information System (INIS)

    Pagani, D.; Tsinikos, I.; Zaro, M.

    2016-01-01

    We discuss the impact of EW corrections on differential distributions in top-quark pair production at the LHC and future hadron colliders, focussing on the effects of initial-state photons. Performing a calculation at Next-to-Leading Order QCD+EW accuracy, we investigate in detail the impact of photon-initiated channels on central values as well as PDF and scale uncertainties, both at order α s α and α s 2 α. We present predictions at 13 and 100 TeV, and provide results for the 8 TeV differential measurements performed by ATLAS and CMS. A thorough comparison of results obtained with the NNPDF2.3QED and CT14QED PDF sets is performed. While contributions due to the photon PDF are negligible with CT14QED, this is not the case for NNPDF2.3QED, where such contributions are sizeable and show large PDF uncertainties. On the one hand, we show that differential observables in top-pair production, in particular top-quark and t anti t rapidities, can be used to improve the determination of the photon PDF within the NNPDF approach. On the other hand, with current PDF sets, we demonstrate the necessity of including EW corrections and photon-induced contributions for a correct determination of both the central value and the uncertainties of theoretical predictions. (orig.)

  20. The impact of the photon PDF and electroweak corrections on t anti t distributions

    Energy Technology Data Exchange (ETDEWEB)

    Pagani, D.; Tsinikos, I. [Universite Catholique de Louvain, Centre for Cosmology, Particle Physics and Phenomenology (CP3), Louvain-la-Neuve (Belgium); Zaro, M. [Sorbonne Universites, UPMC University Paris 06, UMR 589, LPTHE, Paris (France); CNRS, UMR 7589, LPTHE, Paris (France)

    2016-09-15

    We discuss the impact of EW corrections on differential distributions in top-quark pair production at the LHC and future hadron colliders, focussing on the effects of initial-state photons. Performing a calculation at Next-to-Leading Order QCD+EW accuracy, we investigate in detail the impact of photon-initiated channels on central values as well as PDF and scale uncertainties, both at order α{sub s}α and α{sub s}{sup 2}α. We present predictions at 13 and 100 TeV, and provide results for the 8 TeV differential measurements performed by ATLAS and CMS. A thorough comparison of results obtained with the NNPDF2.3QED and CT14QED PDF sets is performed. While contributions due to the photon PDF are negligible with CT14QED, this is not the case for NNPDF2.3QED, where such contributions are sizeable and show large PDF uncertainties. On the one hand, we show that differential observables in top-pair production, in particular top-quark and t anti t rapidities, can be used to improve the determination of the photon PDF within the NNPDF approach. On the other hand, with current PDF sets, we demonstrate the necessity of including EW corrections and photon-induced contributions for a correct determination of both the central value and the uncertainties of theoretical predictions. (orig.)

  1. The PDF4LHC report on PDFs and LHC data: results from Run I and preparation for Run II

    International Nuclear Information System (INIS)

    Rojo, Juan; Accardi, Alberto; Ball, Richard D; Cooper-Sarkar, Amanda; Gwenlan, Claire; Roeck, Albert de; Mangano, Michelangelo; Farry, Stephen; Ferrando, James; Forte, Stefano; Gao, Jun; Harland-Lang, Lucian; Huston, Joey; Glazov, Alexander; Lipka, Katerina; Gouzevitch, Maxime; Lisovyi, Mykhailo; Nadolsky, Pavel

    2015-01-01

    The accurate determination of the parton distribution functions (PDFs) of the proton is an essential ingredient of the Large Hadron Collider (LHC) program. PDF uncertainties impact a wide range of processes, from Higgs boson characterization and precision Standard Model measurements to new physics searches. A major recent development in modern PDF analyses has been to exploit the wealth of new information contained in precision measurements from the LHC Run I, as well as progress in tools and methods to include these data in PDF fits. In this report we summarize the information that PDF-sensitive measurements at the LHC have provided so far, and review the prospects for further constraining PDFs with data from the recently started Run II. This document aims to provide useful input to the LHC collaborations to prioritize their PDF-sensitive measurements at Run II, as well as a comprehensive reference for the PDF-fitting collaborations. (topical review)

  2. The PDF4LHC report on PDFs and LHC data. Results from Run I and preparation for Run II

    International Nuclear Information System (INIS)

    Rojo, Juan; Ball, Richard D.; CERN, Geneva

    2015-07-01

    The accurate determination of the Parton Distribution Functions (PDFs) of the proton is an essential ingredient of the Large Hadron Collider (LHC) program. PDF uncertainties impact a wide range of processes, from Higgs boson characterisation and precision Standard Model measurements to New Physics searches. A major recent development in modern PDF analyses has been to exploit the wealth of new information contained in precision measurements from the LHC Run I, as well as progress in tools and methods to include these data in PDF fits. In this report we summarise the information that PDF-sensitive measurements at the LHC have provided so far, and review the prospects for further constraining PDFs with data from the recently started Run II. This document aims to provide useful input to the LHC collaborations to prioritise their PDF-sensitive measurements at Run II, as well as a comprehensive reference for the PDF-fitting collaborations.

  3. The PDF4LHC report on PDFs and LHC data: Results from Run I and preparation for Run II

    CERN Document Server

    Rojo, Juan; Ball, Richard D; Cooper-Sarkar, Amanda; de Roeck, Albert; Farry, Stephen; Ferrando, James; Forte, Stefano; Gao, Jun; Harland-Lang, Lucian; Huston, Joey; Glazov, Alexander; Gouzevitch, Maxime; Gwenlan, Claire; Lipka, Katerina; Lisovyi, Mykhailo; Mangano, Michelangelo; Nadolsky, Pavel; Perrozzi, Luca; Placakyte, Ringaile; Radescu, Voica; Salam, Gavin P; Thorne, Robert

    2015-01-01

    The accurate determination of the Parton Distribution Functions (PDFs) of the proton is an essential ingredient of the Large Hadron Collider (LHC) program. PDF uncertainties impact a wide range of processes, from Higgs boson characterisation and precision Standard Model measurements to New Physics searches. A major recent development in modern PDF analyses has been to exploit the wealth of new information contained in precision measurements from the LHC Run I, as well as progress in tools and methods to include these data in PDF fits. In this report we summarise the information that PDF-sensitive measurements at the LHC have provided so far, and review the prospects for further constraining PDFs with data from the recently started Run II. This document aims to provide useful input to the LHC collaborations to prioritise their PDF-sensitive measurements at Run II, as well as a comprehensive reference for the PDF-fitting collaborations.

  4. Planet Formation

    Science.gov (United States)

    Podolak, Morris

    2018-04-01

    Modern observational techniques are still not powerful enough to directly view planet formation, and so it is necessary to rely on theory. However, observations do give two important clues to the formation process. The first is that the most primitive form of material in interstellar space exists as a dilute gas. Some of this gas is unstable against gravitational collapse, and begins to contract. Because the angular momentum of the gas is not zero, it contracts along the spin axis, but remains extended in the plane perpendicular to that axis, so that a disk is formed. Viscous processes in the disk carry most of the mass into the center where a star eventually forms. In the process, almost as a by-product, a planetary system is formed as well. The second clue is the time required. Young stars are indeed observed to have gas disks, composed mostly of hydrogen and helium, surrounding them, and observations tell us that these disks dissipate after about 5 to 10 million years. If planets like Jupiter and Saturn, which are very rich in hydrogen and helium, are to form in such a disk, they must accrete their gas within 5 million years of the time of the formation of the disk. Any formation scenario one proposes must produce Jupiter in that time, although the terrestrial planets, which don't contain significant amounts of hydrogen and helium, could have taken longer to build. Modern estimates for the formation time of the Earth are of the order of 100 million years. To date there are two main candidate theories for producing Jupiter-like planets. The core accretion (CA) scenario supposes that any solid materials in the disk slowly coagulate into protoplanetary cores with progressively larger masses. If the core remains small enough it won't have a strong enough gravitational force to attract gas from the surrounding disk, and the result will be a terrestrial planet. If the core grows large enough (of the order of ten Earth masses), and the disk has not yet dissipated, then

  5. A Comparative Study of PDF Generation Methods: Measuring Loss of Fidelity When Converting Arabic and Persian MS Word Files to PDF

    Science.gov (United States)

    2011-02-17

    document objects, on one or more electronic document pages. These commands have their roots in typography , so, to understand the PDF Language, one...must have at least a rudimentary understanding of typography . Only a few of the typographic commands, called text showing operators, can hold strings

  6. Impact of the heavy quark matching scales in PDF fits

    Energy Technology Data Exchange (ETDEWEB)

    Bertone, V. [VU Univ., Amsterdam (Netherlands). Dept. of Physics and Astronomy; Nikhef Theory Goup, Amsterdam (Netherlands); Britzger, D. [DESY, Hamburg (Germany); Camarda, S. [CERN, Geneva (Switzerland); Collaboration: The xFitter Developers' Team; and others

    2017-07-15

    We investigate the impact of displaced heavy quark matching scales in a global fit. The heavy quark matching scale μ{sub m} determines at which energy scale μ the QCD theory transitions from N{sub F} to N{sub F}+1 in the Variable Flavor Number Scheme (VFNS) for the evolution of the Parton Distribution Functions (PDFs) and strong coupling α{sub S}(μ). We study the variation of the matching scales, and their impact on a global PDF fit of the combined HERA data. As the choice of the matching scale μ{sub m} effectively is a choice of scheme, this represents a theoretical uncertainty; ideally, we would like to see minimal dependence on this parameter. For the transition across the charm quark (from N{sub F}=3 to 4), we find a large μ{sub m}=μ{sub c} dependence of the global fit χ{sup 2} at NLO, but this is significantly reduced at NNLO. For the transition across the bottom quark (from N{sub F}=4 to 5), we have a reduced μ{sub m}=μ{sub b} dependence of the χ{sup 2} at both NLO and NNLO as compared to the charm. This feature is now implemented in xFitter 2.0.0, an open source QCD fit framework.

  7. Galaxy Formation

    CERN Document Server

    Longair, Malcolm S

    2008-01-01

    This second edition of Galaxy Formation is an up-to-date text on astrophysical cosmology, expounding the structure of the classical cosmological models from a contemporary viewpoint. This forms the background to a detailed study of the origin of structure and galaxies in the Universe. The derivations of many of the most important results are derived by simple physical arguments which illuminate the results of more advanced treatments. A very wide range of observational data is brought to bear upon these problems, including the most recent results from WMAP, the Hubble Space Telescope, galaxy surveys like the Sloan Digital Sky Survey and the 2dF Galaxy Redshift Survey, studies of Type 1a supernovae, and many other observations.

  8. Galaxy formation

    International Nuclear Information System (INIS)

    Gribbin, J.

    1979-01-01

    The current debate on the origin and evolution of galaxies is reviewed and evidence to support the so-called 'isothermal' and 'adiabatic' fluctuation models considered. It is shown that new theories have to explain the formation of both spiral and elliptical galaxies and the reason for their differences. It is stated that of the most recent models the best indicates that rotating spiral galaxies are formed naturally when gas concentrates in the centre of a great halo and forms stars while ellipticals are explained by later interactions between spiral galaxies and merging, which can cancel out the rotation while producing an elliptical galaxy in which the stars, coming from two original galaxies, follow very elliptical, anisotropic orbits. (UK)

  9. Habit formation.

    Science.gov (United States)

    Smith, Kyle S; Graybiel, Ann M

    2016-03-01

    Habits, both good ones and bad ones, are pervasive in animal behavior. Important frameworks have been developed to understand habits through psychological and neurobiological studies. This work has given us a rich understanding of brain networks that promote habits, and has also helped us to understand what constitutes a habitual behavior as opposed to a behavior that is more flexible and prospective. Mounting evidence from studies using neural recording methods suggests that habit formation is not a simple process. We review this evidence and take the position that habits could be sculpted from multiple dissociable changes in neural activity. These changes occur across multiple brain regions and even within single brain regions. This strategy of classifying components of a habit based on different brain signals provides a potentially useful new way to conceive of disorders that involve overly fixed behaviors as arising from different potential dysfunctions within the brain's habit network.

  10. Habit formation

    Science.gov (United States)

    Smith, Kyle S.; Graybiel, Ann M.

    2016-01-01

    Habits, both good ones and bad ones, are pervasive in animal behavior. Important frameworks have been developed to understand habits through psychological and neurobiological studies. This work has given us a rich understanding of brain networks that promote habits, and has also helped us to understand what constitutes a habitual behavior as opposed to a behavior that is more flexible and prospective. Mounting evidence from studies using neural recording methods suggests that habit formation is not a simple process. We review this evidence and take the position that habits could be sculpted from multiple dissociable changes in neural activity. These changes occur across multiple brain regions and even within single brain regions. This strategy of classifying components of a habit based on different brain signals provides a potentially useful new way to conceive of disorders that involve overly fixed behaviors as arising from different potential dysfunctions within the brain's habit network. PMID:27069378

  11. On the link between column density distribution and density scaling relation in star formation regions

    Science.gov (United States)

    Veltchev, Todor; Donkov, Sava; Stanchev, Orlin

    2017-07-01

    We present a method to derive the density scaling relation ∝ L^{-α} in regions of star formation or in their turbulent vicinities from straightforward binning of the column-density distribution (N-pdf). The outcome of the method is studied for three types of N-pdf: power law (7/5≤α≤5/3), lognormal (0.7≲α≲1.4) and combination of lognormals. In the last case, the method of Stanchev et al. (2015) was also applied for comparison and a very weak (or close to zero) correlation was found. We conclude that the considered `binning approach' reflects rather the local morphology of the N-pdf with no reference to the physical conditions in a considered region. The rough consistency of the derived slopes with the widely adopted Larson's (1981) value α˜1.1 is suggested to support claims that the density-size relation in molecular clouds is indeed an artifact of the observed N-pdf.

  12. A robust, efficient and accurate β- pdf integration algorithm in nonpremixed turbulent combustion

    International Nuclear Information System (INIS)

    Liu, H.; Lien, F.S.; Chui, E.

    2005-01-01

    Among many presumed-shape pdf approaches, the presumed β-function pdf is widely used in nonpremixed turbulent combustion models in the literature. However, singularity difficulties at Z = 0 and 1, Z being the mixture fraction, may be encountered in the numerical integration of the b-function pdf and there are few publications addressing this issue to date. The present study proposes an efficient, robust and accurate algorithm to overcome these numerical difficulties. The present treatment of the β-pdf integration is firstly used in the Burke-Schumann solution in conjunction with the k - ε turbulent model in the case of CH 4 /H 2 bluff-body jets and flames. Afterward it is extended to a more complex model, the laminar flamelet model, for the same flow. Numerical results obtained by using the proposed β-pdf integration method are compared to experimental values of the velocity field, temperature and constituent mass fraction to illustrate the efficiency and accuracy of the present method. (author)

  13. Sparse PDF maps for non-linear multi-resolution image operations

    KAUST Repository

    Hadwiger, Markus

    2012-11-01

    We introduce a new type of multi-resolution image pyramid for high-resolution images called sparse pdf maps (sPDF-maps). Each pyramid level consists of a sparse encoding of continuous probability density functions (pdfs) of pixel neighborhoods in the original image. The encoded pdfs enable the accurate computation of non-linear image operations directly in any pyramid level with proper pre-filtering for anti-aliasing, without accessing higher or lower resolutions. The sparsity of sPDF-maps makes them feasible for gigapixel images, while enabling direct evaluation of a variety of non-linear operators from the same representation. We illustrate this versatility for antialiased color mapping, O(n) local Laplacian filters, smoothed local histogram filters (e.g., median or mode filters), and bilateral filters. © 2012 ACM.

  14. Analysis of theoretical security level of PDF Encryption mechanism based on X.509 certificates

    Directory of Open Access Journals (Sweden)

    Joanna Dmitruk

    2017-12-01

    Full Text Available PDF Encryption is a content security mechanism developed and used by Adobe in their products. In this paper, we have checked a theoretical security level of a variant that uses public key infrastructure and X.509 certificates. We have described a basis of this mechanism and we have performed a simple security analysis. Then, we have showed possible tweaks and security improvements. At the end, we have given some recommendations that can improve security of a content secured with PDF Encryption based on X.509 certificates. Keywords: DRM, cryptography, security level, PDF Encryption, Adobe, X.509

  15. A non-hybrid method for the PDF equations of turbulent flows on unstructured grids

    International Nuclear Information System (INIS)

    Bakosi, J.; Franzese, P.; Boybeyi, Z.

    2008-01-01

    In probability density function (PDF) methods of turbulent flows, the joint PDF of several flow variables is computed by numerically integrating a system of stochastic differential equations for Lagrangian particles. A set of parallel algorithms is proposed to provide an efficient solution of the PDF transport equation modeling the joint PDF of turbulent velocity, frequency and concentration of a passive scalar in geometrically complex configurations. In the vicinity of walls the flow is resolved by an elliptic relaxation technique down to the viscous sublayer, explicitly modeling the high anisotropy and inhomogeneity of the low-Reynolds-number wall region without damping or wall-functions. An unstructured Eulerian grid is employed to extract Eulerian statistics, to solve for quantities represented at fixed locations of the domain (i.e., the mean pressure and the elliptic relaxation tensor) and to track particles. All three aspects regarding the grid make use of the finite element method employing the simplest linear shapefunctions. To model the small-scale mixing of the transported scalar, the interaction by exchange with the conditional mean (IECM) model is adopted. An adaptive algorithm to compute the velocity-conditioned scalar mean is proposed that homogenizes the statistical error over the sample space with no assumption on the shape of the underlying velocity PDF. Compared to other hybrid particle-in-cell approaches for the PDF equations, the current methodology is consistent without the need for consistency conditions. The algorithm is tested by computing the dispersion of passive scalars released from concentrated sources in two different turbulent flows: the fully developed turbulent channel flow and a street canyon (or cavity) flow. Algorithmic details on estimating conditional and unconditional statistics, particle tracking and particle-number control are presented in detail. Relevant aspects of performance and parallelism on cache-based shared memory

  16. Printable Transparent Conductive Films for Flexible Electronics.

    Science.gov (United States)

    Li, Dongdong; Lai, Wen-Yong; Zhang, Yi-Zhou; Huang, Wei

    2018-03-01

    Printed electronics are an important enabling technology for the development of low-cost, large-area, and flexible optoelectronic devices. Transparent conductive films (TCFs) made from solution-processable transparent conductive materials, such as metal nanoparticles/nanowires, carbon nanotubes, graphene, and conductive polymers, can simultaneously exhibit high mechanical flexibility, low cost, and better photoelectric properties compared to the commonly used sputtered indium-tin-oxide-based TCFs, and are thus receiving great attention. This Review summarizes recent advances of large-area flexible TCFs enabled by several roll-to-roll-compatible printed techniques including inkjet printing, screen printing, offset printing, and gravure printing using the emerging transparent conductive materials. The preparation of TCFs including ink formulation, substrate treatment, patterning, and postprocessing, and their potential applications in solar cells, organic light-emitting diodes, and touch panels are discussed in detail. The rational combination of a variety of printed techniques with emerging transparent conductive materials is believed to extend the opportunities for the development of printed electronics within the realm of flexible electronics and beyond. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  17. Transported PDF Modeling of Ethanol Spray in Hot-Diluted Coflow Flame

    OpenAIRE

    Ma, L.; Naud, B.; Roekaerts, D.J.E.M.

    2015-01-01

    This paper presents a numerical modeling study of one ethanol spray flame from the Delft Spray-in-Hot-Coflow (DSHC) database, which has been used to study Moderate or Intense Low-oxygen Dilution (MILD) combustion of liquid fuels (Correia Rodrigues et al. Combust. Flame 162(3), 759–773, 2015). A “Lagrangian-Lagrangian” approach is adopted where both the joint velocity-scalar Probability Density Function (PDF) for the continuous phase and the joint PDF of droplet properties are modeled and solv...

  18. Computationally efficient implementation of combustion chemistry in parallel PDF calculations

    International Nuclear Information System (INIS)

    Lu Liuyan; Lantz, Steven R.; Ren Zhuyin; Pope, Stephen B.

    2009-01-01

    In parallel calculations of combustion processes with realistic chemistry, the serial in situ adaptive tabulation (ISAT) algorithm [S.B. Pope, Computationally efficient implementation of combustion chemistry using in situ adaptive tabulation, Combustion Theory and Modelling, 1 (1997) 41-63; L. Lu, S.B. Pope, An improved algorithm for in situ adaptive tabulation, Journal of Computational Physics 228 (2009) 361-386] substantially speeds up the chemistry calculations on each processor. To improve the parallel efficiency of large ensembles of such calculations in parallel computations, in this work, the ISAT algorithm is extended to the multi-processor environment, with the aim of minimizing the wall clock time required for the whole ensemble. Parallel ISAT strategies are developed by combining the existing serial ISAT algorithm with different distribution strategies, namely purely local processing (PLP), uniformly random distribution (URAN), and preferential distribution (PREF). The distribution strategies enable the queued load redistribution of chemistry calculations among processors using message passing. They are implemented in the software x2f m pi, which is a Fortran 95 library for facilitating many parallel evaluations of a general vector function. The relative performance of the parallel ISAT strategies is investigated in different computational regimes via the PDF calculations of multiple partially stirred reactors burning methane/air mixtures. The results show that the performance of ISAT with a fixed distribution strategy strongly depends on certain computational regimes, based on how much memory is available and how much overlap exists between tabulated information on different processors. No one fixed strategy consistently achieves good performance in all the regimes. Therefore, an adaptive distribution strategy, which blends PLP, URAN and PREF, is devised and implemented. It yields consistently good performance in all regimes. In the adaptive parallel

  19. Marx @ 200: Debating Capitalism & Perspectives for the Future of Radical Theory (combined PDF of all articles

    Directory of Open Access Journals (Sweden)

    Christian Fuchs

    2018-05-01

    Full Text Available Combined pdf of all articles published in the special issue "Marx @ 200: Debating Capitalism & Perspectives for the Future of Radical Theory", edited by Christian Fuchs and Lara Monticelli, tripleC: Communication, Capitalism & Critique 16 (2, 2018, pp. 406-741.

  20. JESS-D-17-00080.pdf | forthcoming | jess | Volumes | public | Indian ...

    Indian Academy of Sciences (India)

    Home; public; Volumes; jess; forthcoming; JESS-D-17-00080.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. 29th Mid-year meeting. Posted on 19 January 2018. The 29th Mid-year ...

  1. JESS-D-17-00037.pdf | forthcoming | jess | Volumes | public | Indian ...

    Indian Academy of Sciences (India)

    Home; public; Volumes; jess; forthcoming; JESS-D-17-00037.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. 29th Mid-year meeting. Posted on 19 January 2018. The 29th Mid-year ...

  2. JESS-D-17-00047.pdf | forthcoming | jess | Volumes | public | Indian ...

    Indian Academy of Sciences (India)

    Home; public; Volumes; jess; forthcoming; JESS-D-17-00047.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. 29th Mid-year meeting. Posted on 19 January 2018. The 29th Mid-year ...

  3. BOMS-D-16-00748.pdf | forthcoming | boms | Volumes | public ...

    Indian Academy of Sciences (India)

    Home; public; Volumes; boms; forthcoming; BOMS-D-16-00748.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. 29th Mid-year meeting. Posted on 19 January 2018. The 29th Mid-year ...

  4. BOMS-D-16-00644.pdf | forthcoming | boms | Volumes | public ...

    Indian Academy of Sciences (India)

    Home; public; Volumes; boms; forthcoming; BOMS-D-16-00644.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. 29th Mid-year meeting. Posted on 19 January 2018. The 29th Mid-year ...

  5. BOMS-D-15-01104.pdf | forthcoming | boms | Volumes | public ...

    Indian Academy of Sciences (India)

    Home; public; Volumes; boms; forthcoming; BOMS-D-15-01104.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. 29th Mid-year meeting. Posted on 19 January 2018. The 29th Mid-year ...

  6. BOMS-D-16-00560.pdf | forthcoming | boms | Volumes | public ...

    Indian Academy of Sciences (India)

    Home; public; Volumes; boms; forthcoming; BOMS-D-16-00560.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. 29th Mid-year meeting. Posted on 19 January 2018. The 29th Mid-year ...

  7. JESS-D-17-00111.pdf | forthcoming | jess | Volumes | public | Indian ...

    Indian Academy of Sciences (India)

    Home; public; Volumes; jess; forthcoming; JESS-D-17-00111.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. 29th Mid-year meeting. Posted on 19 January 2018. The 29th Mid-year ...

  8. JESS-D-17-00152.pdf | forthcoming | jess | Volumes | public | Indian ...

    Indian Academy of Sciences (India)

    Home; public; Volumes; jess; forthcoming; JESS-D-17-00152.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. 29th Mid-year meeting. Posted on 19 January 2018. The 29th Mid-year ...

  9. JESS-D-17-00075.pdf | forthcoming | jess | Volumes | public | Indian ...

    Indian Academy of Sciences (India)

    Home; public; Volumes; jess; forthcoming; JESS-D-17-00075.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. 29th Mid-year meeting. Posted on 19 January 2018. The 29th Mid-year ...

  10. BOMS-D-17-00085.pdf | forthcoming | boms | Volumes | public ...

    Indian Academy of Sciences (India)

    Home; public; Volumes; boms; forthcoming; BOMS-D-17-00085.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. 29th Mid-year meeting. Posted on 19 January 2018. The 29th Mid-year ...

  11. JESS-D-17-00106.pdf | forthcoming | jess | Volumes | public | Indian ...

    Indian Academy of Sciences (India)

    Home; public; Volumes; jess; forthcoming; JESS-D-17-00106.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. 29th Mid-year meeting. Posted on 19 January 2018. The 29th Mid-year ...

  12. JESS-D-16-00357.pdf | forthcoming | jess | Volumes | public | Indian ...

    Indian Academy of Sciences (India)

    Home; public; Volumes; jess; forthcoming; JESS-D-16-00357.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. 29th Mid-year meeting. Posted on 19 January 2018. The 29th Mid-year ...

  13. BOMS-D-16-00562.pdf | forthcoming | boms | Volumes | public ...

    Indian Academy of Sciences (India)

    Home; public; Volumes; boms; forthcoming; BOMS-D-16-00562.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. 29th Mid-year meeting. Posted on 19 January 2018. The 29th Mid-year ...

  14. JESS-D-16-00026.pdf | forthcoming | jess | Volumes | public | Indian ...

    Indian Academy of Sciences (India)

    Home; public; Volumes; jess; forthcoming; JESS-D-16-00026.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. 29th Mid-year meeting. Posted on 19 January 2018. The 29th Mid-year ...

  15. JESS-D-16-00198.pdf | forthcoming | jess | Volumes | public | Indian ...

    Indian Academy of Sciences (India)

    Home; public; Volumes; jess; forthcoming; JESS-D-16-00198.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. 29th Mid-year meeting. Posted on 19 January 2018. The 29th Mid-year ...

  16. JESS-D-16-00349.pdf | forthcoming | jess | Volumes | public | Indian ...

    Indian Academy of Sciences (India)

    Home; public; Volumes; jess; forthcoming; JESS-D-16-00349.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. 29th Mid-year meeting. Posted on 19 January 2018. The 29th Mid-year ...

  17. JESS-D-16-00140.pdf | forthcoming | jess | Volumes | public | Indian ...

    Indian Academy of Sciences (India)

    Home; public; Volumes; jess; forthcoming; JESS-D-16-00140.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. 29th Mid-year meeting. Posted on 19 January 2018. The 29th Mid-year ...

  18. JESS-D-16-00159.pdf | forthcoming | jess | Volumes | public | Indian ...

    Indian Academy of Sciences (India)

    Home; public; Volumes; jess; forthcoming; JESS-D-16-00159.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. 29th Mid-year meeting. Posted on 19 January 2018. The 29th Mid-year ...

  19. JESS-D-16-00046.pdf | forthcoming | jess | Volumes | public | Indian ...

    Indian Academy of Sciences (India)

    Home; public; Volumes; jess; forthcoming; JESS-D-16-00046.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. 29th Mid-year meeting. Posted on 19 January 2018. The 29th Mid-year ...

  20. JESS-D-16-00319.pdf | forthcoming | jess | Volumes | public | Indian ...

    Indian Academy of Sciences (India)

    Home; public; Volumes; jess; forthcoming; JESS-D-16-00319.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. 29th Mid-year meeting. Posted on 19 January 2018. The 29th Mid-year ...

  1. BOMS-D-16-00407.pdf | forthcoming | boms | Volumes | public ...

    Indian Academy of Sciences (India)

    Home; public; Volumes; boms; forthcoming; BOMS-D-16-00407.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. 29th Mid-year meeting. Posted on 19 January 2018. The 29th Mid-year ...

  2. JESS-D-17-00003.pdf | forthcoming | jess | Volumes | public | Indian ...

    Indian Academy of Sciences (India)

    Home; public; Volumes; jess; forthcoming; JESS-D-17-00003.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. 29th Mid-year meeting. Posted on 19 January 2018. The 29th Mid-year ...

  3. BOMS-D-16-00569.pdf | forthcoming | boms | Volumes | public ...

    Indian Academy of Sciences (India)

    Home; public; Volumes; boms; forthcoming; BOMS-D-16-00569.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. 29th Mid-year meeting. Posted on 19 January 2018. The 29th Mid-year ...

  4. BOMS-D-15-00965.pdf | forthcoming | boms | Volumes | public ...

    Indian Academy of Sciences (India)

    Home; public; Volumes; boms; forthcoming; BOMS-D-15-00965.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. 29th Mid-year meeting. Posted on 19 January 2018. The 29th Mid-year ...

  5. BOMS-D-17-00322.pdf | forthcoming | boms | Volumes | public ...

    Indian Academy of Sciences (India)

    Home; public; Volumes; boms; forthcoming; BOMS-D-17-00322.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. 29th Mid-year meeting. Posted on 19 January 2018. The 29th Mid-year ...

  6. BOMS-D-16-00821.pdf | forthcoming | boms | Volumes | public ...

    Indian Academy of Sciences (India)

    Home; public; Volumes; boms; forthcoming; BOMS-D-16-00821.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. 29th Mid-year meeting. Posted on 19 January 2018. The 29th Mid-year ...

  7. BOMS-D-16-00613.pdf | forthcoming | boms | Volumes | public ...

    Indian Academy of Sciences (India)

    Home; public; Volumes; boms; forthcoming; BOMS-D-16-00613.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. 29th Mid-year meeting. Posted on 19 January 2018. The 29th Mid-year ...

  8. BOMS-D-16-00443.pdf | forthcoming | boms | Volumes | public ...

    Indian Academy of Sciences (India)

    Home; public; Volumes; boms; forthcoming; BOMS-D-16-00443.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. 29th Mid-year meeting. Posted on 19 January 2018. The 29th Mid-year ...

  9. BOMS-D-15-01110.pdf | forthcoming | boms | Volumes | public ...

    Indian Academy of Sciences (India)

    Home; public; Volumes; boms; forthcoming; BOMS-D-15-01110.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. 29th Mid-year meeting. Posted on 19 January 2018. The 29th Mid-year ...

  10. JESS-D-16-00288.pdf | forthcoming | jess | Volumes | public | Indian ...

    Indian Academy of Sciences (India)

    Home; public; Volumes; jess; forthcoming; JESS-D-16-00288.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. 29th Mid-year meeting. Posted on 19 January 2018. The 29th Mid-year ...

  11. JESS-D-16-00449.pdf | forthcoming | jess | Volumes | public | Indian ...

    Indian Academy of Sciences (India)

    Home; public; Volumes; jess; forthcoming; JESS-D-16-00449.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. 29th Mid-year meeting. Posted on 19 January 2018. The 29th Mid-year ...

  12. BOMS-D-16-00790.pdf | forthcoming | boms | Volumes | public ...

    Indian Academy of Sciences (India)

    Home; public; Volumes; boms; forthcoming; BOMS-D-16-00790.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. 29th Mid-year meeting. Posted on 19 January 2018. The 29th Mid-year ...

  13. BOMS-D-16-00881.pdf | forthcoming | boms | Volumes | public ...

    Indian Academy of Sciences (India)

    Home; public; Volumes; boms; forthcoming; BOMS-D-16-00881.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. 29th Mid-year meeting. Posted on 19 January 2018. The 29th Mid-year ...

  14. 0011-0030.IEEE 754: 64 Bit Double Precision FloatsThis.pdf | 01 ...

    Indian Academy of Sciences (India)

    Home; public; Volumes; reso; 021; 01; 0011-0030.IEEE 754: 64 Bit Double Precision FloatsThis.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. 29th Mid-year meeting. Posted on 19 ...

  15. BOMS-D-16-00368.pdf | forthcoming | boms | Volumes | public ...

    Indian Academy of Sciences (India)

    Home; public; Volumes; boms; forthcoming; BOMS-D-16-00368.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. 29th Mid-year meeting. Posted on 19 January 2018. The 29th Mid-year ...

  16. JESS-D-16-00612.pdf | forthcoming | jess | Volumes | public | Indian ...

    Indian Academy of Sciences (India)

    Home; public; Volumes; jess; forthcoming; JESS-D-16-00612.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. 29th Mid-year meeting. Posted on 19 January 2018. The 29th Mid-year ...

  17. Scalar and joint velocity-scalar PDF modelling of near-wall turbulent heat transfer

    International Nuclear Information System (INIS)

    Pozorski, Jacek; Waclawczyk, Marta; Minier, Jean-Pierre

    2004-01-01

    The temperature field in a heated turbulent flow is considered as a dynamically passive scalar. The probability density function (PDF) method with down to the wall integration is explored and new modelling proposals are put forward, including the explicit account for the molecular transport terms. Two variants of the approach are considered: first, the scalar PDF method with the use of externally-provided turbulence statistics; and second, the joint (stand-alone) velocity-scalar PDF method where a near-wall model for dynamical variables is coupled with a model for temperature. The closure proposals are formulated in the Lagrangian setting and resulting stochastic evolution equations are solved with a Monte Carlo method. The near-wall region of a heated channel flow is taken as a validation case; the second-order thermal statistics are of a particular interest. The PDF computation results agree reasonably with available DNS data. The sensitivity of results to the molecular Prandtl number and to the thermal wall boundary condition is accounted for

  18. BOMS-D-17-00377.pdf | forthcoming | boms | Volumes | public ...

    Indian Academy of Sciences (India)

    Home; public; Volumes; boms; forthcoming; BOMS-D-17-00377.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. 29th Mid-year meeting. Posted on 19 January 2018. The 29th Mid-year ...

  19. The photon PDF from high-mass Drell Yan data at the LHC

    CERN Document Server

    Giuli, Francesco

    2017-05-25

    In this contribution, we review the results of [1], where a determination of the photon PDF from fits to recent ATLAS measurements of high-mass Drell-Yan dilepton production at $\\sqrt{s}$ = 8 TeV is presented.

  20. BOMS-D-16-00728.pdf | forthcoming | boms | Volumes | public ...

    Indian Academy of Sciences (India)

    Home; public; Volumes; boms; forthcoming; BOMS-D-16-00728.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. 29th Mid-year meeting. Posted on 19 January 2018. The 29th Mid-year ...

  1. BOMS-D-16-01004.pdf | forthcoming | boms | Volumes | public ...

    Indian Academy of Sciences (India)

    Home; public; Volumes; boms; forthcoming; BOMS-D-16-01004.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. 29th Mid-year meeting. Posted on 19 January 2018. The 29th Mid-year ...

  2. BOMS-D-16-00023.pdf | forthcoming | boms | Volumes | public ...

    Indian Academy of Sciences (India)

    Home; public; Volumes; boms; forthcoming; BOMS-D-16-00023.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. 29th Mid-year meeting. Posted on 19 January 2018. The 29th Mid-year ...

  3. BOMS-D-16-00399.pdf | forthcoming | boms | Volumes | public ...

    Indian Academy of Sciences (India)

    Home; public; Volumes; boms; forthcoming; BOMS-D-16-00399.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. 29th Mid-year meeting. Posted on 19 January 2018. The 29th Mid-year ...

  4. JESS-D-16-00178.pdf | forthcoming | jess | Volumes | public | Indian ...

    Indian Academy of Sciences (India)

    Home; public; Volumes; jess; forthcoming; JESS-D-16-00178.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. 29th Mid-year meeting. Posted on 19 January 2018. The 29th Mid-year ...

  5. BOMS-D-17-00315.pdf | forthcoming | boms | Volumes | public ...

    Indian Academy of Sciences (India)

    Home; public; Volumes; boms; forthcoming; BOMS-D-17-00315.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. 29th Mid-year meeting. Posted on 19 January 2018. The 29th Mid-year ...

  6. JESS-D-16-00654.pdf | forthcoming | jess | Volumes | public | Indian ...

    Indian Academy of Sciences (India)

    Home; public; Volumes; jess; forthcoming; JESS-D-16-00654.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. 29th Mid-year meeting. Posted on 19 January 2018. The 29th Mid-year ...

  7. JESS-D-16-00540.pdf | forthcoming | jess | Volumes | public | Indian ...

    Indian Academy of Sciences (India)

    Home; public; Volumes; jess; forthcoming; JESS-D-16-00540.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. 29th Mid-year meeting. Posted on 19 January 2018. The 29th Mid-year ...

  8. BOMS-D-16-00015.pdf | forthcoming | boms | Volumes | public ...

    Indian Academy of Sciences (India)

    Home; public; Volumes; boms; forthcoming; BOMS-D-16-00015.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. 29th Mid-year meeting. Posted on 19 January 2018. The 29th Mid-year ...

  9. BOMS-D-15-00018.pdf | forthcoming | boms | Volumes | public ...

    Indian Academy of Sciences (India)

    Home; public; Volumes; boms; forthcoming; BOMS-D-15-00018.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. 29th Mid-year meeting. Posted on 19 January 2018. The 29th Mid-year ...

  10. 351.pdf | mar2007 | jbiosci | www.ias.ac.in | | http: | Indian Academy ...

    Indian Academy of Sciences (India)

    Home; http: www.ias.ac.in; jbiosci; mar2007; 351.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. Summer Research Fellowship Programme 2018. Posted on 16 December 2017.

  11. A Bayesian way to solve the pdf selection problem an application in geotechnical analysis

    NARCIS (Netherlands)

    Kerstens, J.G.M.

    2007-01-01

    Single probability density functions (pdf) are often selected based on a best-fit approach or the minimum description length (MDL) theorem that finds its description by the theory of complexity by Kolmogorov. However, it often occurs that random data cannot be accurately described by any of the

  12. Comparison of PDF and Moment Closure Methods in the Modeling of Turbulent Reacting Flows

    Science.gov (United States)

    Norris, Andrew T.; Hsu, Andrew T.

    1994-01-01

    In modeling turbulent reactive flows, Probability Density Function (PDF) methods have an advantage over the more traditional moment closure schemes in that the PDF formulation treats the chemical reaction source terms exactly, while moment closure methods are required to model the mean reaction rate. The common model used is the laminar chemistry approximation, where the effects of turbulence on the reaction are assumed negligible. For flows with low turbulence levels and fast chemistry, the difference between the two methods can be expected to be small. However for flows with finite rate chemistry and high turbulence levels, significant errors can be expected in the moment closure method. In this paper, the ability of the PDF method and the moment closure scheme to accurately model a turbulent reacting flow is tested. To accomplish this, both schemes were used to model a CO/H2/N2- air piloted diffusion flame near extinction. Identical thermochemistry, turbulence models, initial conditions and boundary conditions are employed to ensure a consistent comparison can be made. The results of the two methods are compared to experimental data as well as to each other. The comparison reveals that the PDF method provides good agreement with the experimental data, while the moment closure scheme incorrectly shows a broad, laminar-like flame structure.

  13. Assessment of PDF Micromixing Models Using DNS Data for a Two-Step Reaction

    Science.gov (United States)

    Tsai, Kuochen; Chakrabarti, Mitali; Fox, Rodney O.; Hill, James C.

    1996-11-01

    Although the probability density function (PDF) method is known to treat the chemical reaction terms exactly, its application to turbulent reacting flows have been overshadowed by the ability to model the molecular mixing terms satisfactorily. In this study, two PDF molecular mixing models, the linear-mean-square-estimation (LMSE or IEM) model and the generalized interaction-by-exchange-with-the-mean (GIEM) model, are compared with the DNS data in decaying turbulence with a two-step parallel-consecutive reaction and two segregated initial conditions: ``slabs" and ``blobs". Since the molecular mixing model is expected to have a strong effect on the mean values of chemical species under such initial conditions, the model evaluation is intended to answer the following questions: Can the PDF models predict the mean values of chemical species correctly with completely segregated initial conditions? (2) Is a single molecular mixing timescale sufficient for the PDF models to predict the mean values with different initial conditions? (3) Will the chemical reactions change the molecular mixing timescales of the reacting species enough to affect the accuracy of the model's prediction for the mean values of chemical species?

  14. BOMS-D-17-00399.pdf | forthcoming | boms | Volumes | public ...

    Indian Academy of Sciences (India)

    Home; public; Volumes; boms; forthcoming; BOMS-D-17-00399.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. 29th Mid-year meeting. Posted on 19 January 2018. The 29th Mid-year ...

  15. JESS-D-16-00261.pdf | forthcoming | jess | Volumes | public | Indian ...

    Indian Academy of Sciences (India)

    Home; public; Volumes; jess; forthcoming; JESS-D-16-00261.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. 29th Mid-year meeting. Posted on 19 January 2018. The 29th Mid-year ...

  16. BOMS-D-16-00992.pdf | forthcoming | boms | Volumes | public ...

    Indian Academy of Sciences (India)

    Home; public; Volumes; boms; forthcoming; BOMS-D-16-00992.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. 29th Mid-year meeting. Posted on 19 January 2018. The 29th Mid-year ...

  17. JESS-D-16-00151.pdf | forthcoming | jess | Volumes | public | Indian ...

    Indian Academy of Sciences (India)

    Home; public; Volumes; jess; forthcoming; JESS-D-16-00151.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. 29th Mid-year meeting. Posted on 19 January 2018. The 29th Mid-year ...

  18. JOAA-D-17-00074.pdf | forthcoming | joaa | Volumes | public | Indian ...

    Indian Academy of Sciences (India)

    Home; public; Volumes; joaa; forthcoming; JOAA-D-17-00074.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. 29th Mid-year meeting. Posted on 19 January 2018. The 29th Mid-year ...

  19. JOAA-D-17-00029.pdf | forthcoming | joaa | Volumes | public | Indian ...

    Indian Academy of Sciences (India)

    Home; public; Volumes; joaa; forthcoming; JOAA-D-17-00029.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. 29th Mid-year meeting. Posted on 19 January 2018. The 29th Mid-year ...

  20. BOMS-D-15-00514.pdf | forthcoming | boms | Volumes | public ...

    Indian Academy of Sciences (India)

    Home; public; Volumes; boms; forthcoming; BOMS-D-15-00514.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. 29th Mid-year meeting. Posted on 19 January 2018. The 29th Mid-year ...

  1. BOMS-D-17-00606.pdf | forthcoming | boms | Volumes | public ...

    Indian Academy of Sciences (India)

    Home; public; Volumes; boms; forthcoming; BOMS-D-17-00606.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. 29th Mid-year meeting. Posted on 19 January 2018. The 29th Mid-year ...

  2. BOMS-D-17-00607.pdf | forthcoming | boms | Volumes | public ...

    Indian Academy of Sciences (India)

    Home; public; Volumes; boms; forthcoming; BOMS-D-17-00607.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. 29th Mid-year meeting. Posted on 19 January 2018. The 29th Mid-year ...

  3. BOMS-D-16-00720.pdf | forthcoming | boms | Volumes | public ...

    Indian Academy of Sciences (India)

    Home; public; Volumes; boms; forthcoming; BOMS-D-16-00720.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. 29th Mid-year meeting. Posted on 19 January 2018. The 29th Mid-year ...

  4. JESS-D-16-00476.pdf | forthcoming | jess | Volumes | public | Indian ...

    Indian Academy of Sciences (India)

    Home; public; Volumes; jess; forthcoming; JESS-D-16-00476.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. 29th Mid-year meeting. Posted on 19 January 2018. The 29th Mid-year ...

  5. BOMS-D-16-00509.pdf | forthcoming | boms | Volumes | public ...

    Indian Academy of Sciences (India)

    Home; public; Volumes; boms; forthcoming; BOMS-D-16-00509.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. 29th Mid-year meeting. Posted on 19 January 2018. The 29th Mid-year ...

  6. Effect of metal ion on the structure and function of LiPDF: The study of the fine structure around the metal site using XANES

    International Nuclear Information System (INIS)

    Wang Yu; Chu Wangsheng; Yang Feifei; Yu Meijuan; Zhao Haifeng; Gong Weimin; Dong Yuhui; Xie Yaning; Wu, Ziyu

    2010-01-01

    We used X-ray absorption near edge structure (XANES) spectroscopy to investigate the metal-dependent enzymatic activity of the peptide deformylase from Leptospira interrogans (LiPDF). Ab initio full multiple scattering calculations performed by MXAN are applied to obtain the local structure of the cobalt-containing LiPDF (Co-LiPDF) and zinc-containing LiPDF (Zn-LiPDF) around the metal sites in pH9.0 buffer solution. The result shows the cobalt-wat1 (the bond water molecule) distance of Co-LiPDF is 1.89 A, much shorter than that of Zn-LiPDF, 2.50 A. That is an essential factor for its low catalytic activity.

  7. Effect of metal ion on the structure and function of LiPDF: The study of the fine structure around the metal site using XANES

    Energy Technology Data Exchange (ETDEWEB)

    Wang Yu [Institute of High Energy Physics, Chinese Academy of Sciences, Beijing 100049 (China); National Synchrotron Radiation Laboratory, University of Science and Technology of China, Hefei 230029 (China); Chu Wangsheng, E-mail: cws@ihep.ac.c [Institute of High Energy Physics, Chinese Academy of Sciences, Beijing 100049 (China); Yang Feifei; Yu Meijuan; Zhao Haifeng [Institute of High Energy Physics, Chinese Academy of Sciences, Beijing 100049 (China); Gong Weimin [National Laboratory of Biomacromolecules, Institute of Biophysics, Chinese Academy of Sciences, Beijing 100101 (China); Dong Yuhui; Xie Yaning [Institute of High Energy Physics, Chinese Academy of Sciences, Beijing 100049 (China); Wu, Ziyu, E-mail: wuzy@ustc.edu.c [National Synchrotron Radiation Laboratory, University of Science and Technology of China, Hefei 230029 (China); Institute of High Energy Physics, Chinese Academy of Sciences, Beijing 100049 (China)

    2010-07-21

    We used X-ray absorption near edge structure (XANES) spectroscopy to investigate the metal-dependent enzymatic activity of the peptide deformylase from Leptospira interrogans (LiPDF). Ab initio full multiple scattering calculations performed by MXAN are applied to obtain the local structure of the cobalt-containing LiPDF (Co-LiPDF) and zinc-containing LiPDF (Zn-LiPDF) around the metal sites in pH9.0 buffer solution. The result shows the cobalt-wat1 (the bond water molecule) distance of Co-LiPDF is 1.89 A, much shorter than that of Zn-LiPDF, 2.50 A. That is an essential factor for its low catalytic activity.

  8. Hybrid finite-volume/transported PDF method for the simulation of turbulent reactive flows

    Science.gov (United States)

    Raman, Venkatramanan

    A novel computational scheme is formulated for simulating turbulent reactive flows in complex geometries with detailed chemical kinetics. A Probability Density Function (PDF) based method that handles the scalar transport equation is coupled with an existing Finite Volume (FV) Reynolds-Averaged Navier-Stokes (RANS) flow solver. The PDF formulation leads to closed chemical source terms and facilitates the use of detailed chemical mechanisms without approximations. The particle-based PDF scheme is modified to handle complex geometries and grid structures. Grid-independent particle evolution schemes that scale linearly with the problem size are implemented in the Monte-Carlo PDF solver. A novel algorithm, in situ adaptive tabulation (ISAT) is employed to ensure tractability of complex chemistry involving a multitude of species. Several non-reacting test cases are performed to ascertain the efficiency and accuracy of the method. Simulation results from a turbulent jet-diffusion flame case are compared against experimental data. The effect of micromixing model, turbulence model and reaction scheme on flame predictions are discussed extensively. Finally, the method is used to analyze the Dow Chlorination Reactor. Detailed kinetics involving 37 species and 158 reactions as well as a reduced form with 16 species and 21 reactions are used. The effect of inlet configuration on reactor behavior and product distribution is analyzed. Plant-scale reactors exhibit quenching phenomena that cannot be reproduced by conventional simulation methods. The FV-PDF method predicts quenching accurately and provides insight into the dynamics of the reactor near extinction. The accuracy of the fractional time-stepping technique in discussed in the context of apparent multiple-steady states observed in a non-premixed feed configuration of the chlorination reactor.

  9. Magnetismo 2000

    Science.gov (United States)

    Cardús, J. O.; Curto, J. J.; Sanclement, E.; Torta, J. M.

    This CD-ROM presents the digital version of the Boletin del Observatorio del Ebro Magnetismo. It contains data obtained in the Magnetic Station of the Ebre Observatory during the year 2000. The structure of the CD-ROM consists of one directory numbered with the year of the measurement. There, it could be found the bulletin as printable sheets (Year.pdf) generate with Adobe Acrobat and data files in plain ASCII text (Year.wdc) readable with any text editor. These data files were compiled according to the data exchange format recommended by the IAGA-2002.

  10. Magnetismo 2002

    Science.gov (United States)

    Cardús, J. O.; Curto, J. J.; Sanclement, E.; Torta, J. M.

    This CD-ROM presents the digital version of the Boletin del Observatorio del Ebro Magnetismo. It contains data obtained in the Magnetic Station of the Ebre Observatory during the year 2002. The structure of the CD-ROM consists of one directory numbered with the year of the measurement. There, it could be found the bulletin as printable sheets (Year.pdf) generate with Adobe Acrobat and data files in plain ASCII text (Year.wdc) readable with any text editor. These data files were compiled according to the data exchange format recommended by the IAGA-2002.

  11. Magnetismo 2003

    Science.gov (United States)

    Cardús, J. O.; Curto, J. J.; Sanclement, E.; Torta, J. M.

    This CD-ROM presents the digital version of the Boletin del Observatorio del Ebro Magnetismo. It contains data obtained in the Magnetic Station of the Ebre Observatory during the year 2003. The structure of the CD-ROM consists of one directory numbered with the year of the measurement. There, it could be found the bulletin as printable sheets (Year.pdf) generate with Adobe Acrobat and data files in plain ASCII text (Year.wdc) readable with any text editor. These data files were compiled according to the data exchange format recommended by the IAGA-2002.

  12. Magnetismo 2001

    Science.gov (United States)

    Cardús, J. O.; Curto, J. J.; Sanclement, E.; Torta, J. M.

    This CD-ROM presents the digital version of the Boletin del Observatorio del Ebro Magnetismo. It contains data obtained in the Magnetic Station of the Ebre Observatory during the year 2001. The structure of the CD-ROM consists of one directory numbered with the year of the measurement. There, it could be found the bulletin as printable sheets (Year.pdf) generate with Adobe Acrobat and data files in plain ASCII text (Year.wdc) readable with any text editor. These data files were compiled according to the data exchange format recommended by the IAGA-2002.

  13. High-pressure pair distribution function (PDF) measurement using high-energy focused x-ray beam

    Energy Technology Data Exchange (ETDEWEB)

    Hong, Xinguo, E-mail: xhong@bnl.gov; Weidner, Donald J. [Mineral Physics Institute, Stony Brook University, Stony Brook, NY 11794 (United States); Ehm, Lars [Mineral Physics Institute, Stony Brook University, Stony Brook, NY 11794 (United States); National Synchrotron Light Source II, Brookhaven National Laboratory, Upton, NY 11973 (United States); Zhong, Zhong; Ghose, Sanjit [National Synchrotron Light Source II, Brookhaven National Laboratory, Upton, NY 11973 (United States); Duffy, Thomas S. [Department of Geosciences, Princeton University, Princeton, NJ 08544 (United States)

    2016-07-27

    In this paper, we report recent development of the high-pressure pair distribution function (HP-PDF) measurement technique using a focused high-energy X-ray beam coupled with a diamond anvil cell (DAC). The focusing optics consist of a sagittally bent Laue monochromator and Kirkpatrick-Baez (K–B) mirrors. This combination provides a clean high-energy X-ray beam suitable for HP-PDF research. Demonstration of the HP-PDF technique for nanocrystalline platinum under quasi-hydrostatic condition above 30 GPa is presented.

  14. STAR FORMATION IN TURBULENT MOLECULAR CLOUDS WITH COLLIDING FLOW

    International Nuclear Information System (INIS)

    Matsumoto, Tomoaki; Dobashi, Kazuhito; Shimoikura, Tomomi

    2015-01-01

    Using self-gravitational hydrodynamical numerical simulations, we investigated the evolution of high-density turbulent molecular clouds swept by a colliding flow. The interaction of shock waves due to turbulence produces networks of thin filamentary clouds with a sub-parsec width. The colliding flow accumulates the filamentary clouds into a sheet cloud and promotes active star formation for initially high-density clouds. Clouds with a colliding flow exhibit a finer filamentary network than clouds without a colliding flow. The probability distribution functions (PDFs) for the density and column density can be fitted by lognormal functions for clouds without colliding flow. When the initial turbulence is weak, the column density PDF has a power-law wing at high column densities. The colliding flow considerably deforms the PDF, such that the PDF exhibits a double peak. The stellar mass distributions reproduced here are consistent with the classical initial mass function with a power-law index of –1.35 when the initial clouds have a high density. The distribution of stellar velocities agrees with the gas velocity distribution, which can be fitted by Gaussian functions for clouds without colliding flow. For clouds with colliding flow, the velocity dispersion of gas tends to be larger than the stellar velocity dispersion. The signatures of colliding flows and turbulence appear in channel maps reconstructed from the simulation data. Clouds without colliding flow exhibit a cloud-scale velocity shear due to the turbulence. In contrast, clouds with colliding flow show a prominent anti-correlated distribution of thin filaments between the different velocity channels, suggesting collisions between the filamentary clouds

  15. STAR FORMATION IN TURBULENT MOLECULAR CLOUDS WITH COLLIDING FLOW

    Energy Technology Data Exchange (ETDEWEB)

    Matsumoto, Tomoaki [Faculty of Humanity and Environment, Hosei University, Fujimi, Chiyoda-ku, Tokyo 102-8160 (Japan); Dobashi, Kazuhito; Shimoikura, Tomomi, E-mail: matsu@hosei.ac.jp [Department of Astronomy and Earth Sciences, Tokyo Gakugei University, Koganei, Tokyo 184-8501 (Japan)

    2015-03-10

    Using self-gravitational hydrodynamical numerical simulations, we investigated the evolution of high-density turbulent molecular clouds swept by a colliding flow. The interaction of shock waves due to turbulence produces networks of thin filamentary clouds with a sub-parsec width. The colliding flow accumulates the filamentary clouds into a sheet cloud and promotes active star formation for initially high-density clouds. Clouds with a colliding flow exhibit a finer filamentary network than clouds without a colliding flow. The probability distribution functions (PDFs) for the density and column density can be fitted by lognormal functions for clouds without colliding flow. When the initial turbulence is weak, the column density PDF has a power-law wing at high column densities. The colliding flow considerably deforms the PDF, such that the PDF exhibits a double peak. The stellar mass distributions reproduced here are consistent with the classical initial mass function with a power-law index of –1.35 when the initial clouds have a high density. The distribution of stellar velocities agrees with the gas velocity distribution, which can be fitted by Gaussian functions for clouds without colliding flow. For clouds with colliding flow, the velocity dispersion of gas tends to be larger than the stellar velocity dispersion. The signatures of colliding flows and turbulence appear in channel maps reconstructed from the simulation data. Clouds without colliding flow exhibit a cloud-scale velocity shear due to the turbulence. In contrast, clouds with colliding flow show a prominent anti-correlated distribution of thin filaments between the different velocity channels, suggesting collisions between the filamentary clouds.

  16. Genetics Home Reference: thrombotic thrombocytopenic purpura

    Science.gov (United States)

    ... Home Health Conditions Thrombotic thrombocytopenic purpura Thrombotic thrombocytopenic purpura Printable PDF Open All Close All Enable Javascript ... view the expand/collapse boxes. Description Thrombotic thrombocytopenic purpura is a rare disorder that causes blood clots ( ...

  17. Genetics Home Reference: Parkinson disease

    Science.gov (United States)

    ... Email Facebook Twitter Home Health Conditions Parkinson disease Parkinson disease Printable PDF Open All Close All Enable Javascript to view the expand/collapse boxes. Description Parkinson disease is a progressive disorder of the nervous ...

  18. Genetics Home Reference: MPV17-related hepatocerebral mitochondrial DNA depletion syndrome

    Science.gov (United States)

    ... DNA depletion syndrome MPV17-related hepatocerebral mitochondrial DNA depletion syndrome Printable PDF Open All Close All Enable ... collapse boxes. Description MPV17 -related hepatocerebral mitochondrial DNA depletion syndrome is an inherited disorder that can cause ...

  19. Genetics Home Reference: autism spectrum disorder

    Science.gov (United States)

    ... Share: Email Facebook Twitter Home Health Conditions ASD Autism spectrum disorder Printable PDF Open All Close All Enable Javascript to view the expand/collapse boxes. Description Autism spectrum disorder ( ASD ) is a condition that appears very early ...

  20. Genetics Home Reference: hereditary fibrosing poikiloderma with tendon contractures, myopathy, and pulmonary fibrosis

    Science.gov (United States)

    ... Hereditary fibrosing poikiloderma with tendon contractures, myopathy, and pulmonary fibrosis Printable PDF Open All Close All Enable Javascript ... Fibrosing Poikiloderma with Tendon Contractures, Myopathy, and Pulmonary ... Lung, and Blood Institute (NHLBI): Pulmonary Function Tests National ...

  1. Genetics Home Reference: Duchenne and Becker muscular dystrophy

    Science.gov (United States)

    ... Conditions Duchenne and Becker muscular dystrophy Duchenne and Becker muscular dystrophy Printable PDF Open All Close All Enable Javascript ... dystrophy occur almost exclusively in males. Duchenne and Becker muscular dystrophies have similar signs and symptoms and are caused ...

  2. Genetics Home Reference: ataxia with vitamin E deficiency

    Science.gov (United States)

    ... Conditions Ataxia with vitamin E deficiency Ataxia with vitamin E deficiency Printable PDF Open All Close All Enable ... view the expand/collapse boxes. Description Ataxia with vitamin E deficiency is a disorder that impairs the body's ...

  3. Genetics Home Reference: PDGFRB-associated chronic eosinophilic leukemia

    Science.gov (United States)

    ... associated chronic eosinophilic leukemia PDGFRB-associated chronic eosinophilic leukemia Printable PDF Open All Close All Enable Javascript ... expand/collapse boxes. Description PDGFRB -associated chronic eosinophilic leukemia is a type of cancer of blood-forming ...

  4. Genetics Home Reference: head and neck squamous cell carcinoma

    Science.gov (United States)

    ... and neck squamous cell carcinoma Head and neck squamous cell carcinoma Printable PDF Open All Close All Enable Javascript ... Consumer Version: Overview of Mouth, Nose, and Throat Cancers Orphanet: Squamous cell carcinoma of head and neck University of Michigan ...

  5. Genetics Home Reference: vitamin D-dependent rickets

    Science.gov (United States)

    ... Conditions Vitamin D-dependent rickets Vitamin D-dependent rickets Printable PDF Open All Close All Enable Javascript ... the expand/collapse boxes. Description Vitamin D-dependent rickets is a disorder of bone development that leads ...

  6. Genetics Home Reference: factor VII deficiency

    Science.gov (United States)

    ... Facebook Twitter Home Health Conditions Factor VII deficiency Factor VII deficiency Printable PDF Open All Close All Enable Javascript to view the expand/collapse boxes. Description Factor VII deficiency is a rare bleeding disorder that varies ...

  7. Genetics Home Reference: systemic lupus erythematosus

    Science.gov (United States)

    ... Twitter Home Health Conditions Systemic lupus erythematosus Systemic lupus erythematosus Printable PDF Open All Close All Enable Javascript to view the expand/collapse boxes. Description Systemic lupus erythematosus (SLE) is a chronic disease that causes inflammation ...

  8. Genetics Home Reference: type A insulin resistance syndrome

    Science.gov (United States)

    ... Conditions Type A insulin resistance syndrome Type A insulin resistance syndrome Printable PDF Open All Close All Enable ... view the expand/collapse boxes. Description Type A insulin resistance syndrome is a rare disorder characterized by severe ...

  9. Genetics Home Reference: Waardenburg syndrome

    Science.gov (United States)

    ... Email Facebook Twitter Home Health Conditions Waardenburg syndrome Waardenburg syndrome Printable PDF Open All Close All Enable Javascript to view the expand/collapse boxes. Description Waardenburg syndrome is a group of genetic conditions that can ...

  10. Genetics Home Reference: Dandy-Walker malformation

    Science.gov (United States)

    ... Twitter Home Health Conditions Dandy-Walker malformation Dandy-Walker malformation Printable PDF Open All Close All Enable ... to view the expand/collapse boxes. Description Dandy-Walker malformation affects brain development, primarily development of the ...

  11. Genetics Home Reference: SOX2 anophthalmia syndrome

    Science.gov (United States)

    ... Twitter Home Health Conditions SOX2 anophthalmia syndrome SOX2 anophthalmia syndrome Printable PDF Open All Close All Enable ... to view the expand/collapse boxes. Description SOX2 anophthalmia syndrome is a rare disorder characterized by abnormal ...

  12. Genetics Home Reference: pyridoxine-dependent epilepsy

    Science.gov (United States)

    ... Home Health Conditions Pyridoxine-dependent epilepsy Pyridoxine-dependent epilepsy Printable PDF Open All Close All Enable Javascript ... view the expand/collapse boxes. Description Pyridoxine-dependent epilepsy is a condition that involves seizures beginning in ...

  13. Genetics Home Reference: spinal muscular atrophy with progressive myoclonic epilepsy

    Science.gov (United States)

    ... myoclonic epilepsy Spinal muscular atrophy with progressive myoclonic epilepsy Printable PDF Open All Close All Enable Javascript ... boxes. Description Spinal muscular atrophy with progressive myoclonic epilepsy (SMA-PME) is a neurological condition that causes ...

  14. Genetics Home Reference: Cole disease

    Science.gov (United States)

    ... Email Facebook Twitter Home Health Conditions Cole disease Cole disease Printable PDF Open All Close All Enable Javascript to view the expand/collapse boxes. Description Cole disease is a disorder that affects the skin. People ...

  15. Genetics Home Reference: neuropathy, ataxia, and retinitis pigmentosa

    Science.gov (United States)

    ... Twitter Home Health Conditions NARP Neuropathy, ataxia, and retinitis pigmentosa Printable PDF Open All Close All Enable Javascript ... the expand/collapse boxes. Description Neuropathy, ataxia, and retinitis pigmentosa ( NARP ) is a condition that causes a variety ...

  16. Genetics Home Reference: lung cancer

    Science.gov (United States)

    ... Share: Email Facebook Twitter Home Health Conditions Lung cancer Lung cancer Printable PDF Open All Close All Enable Javascript ... cancer, childhood Additional NIH Resources (3 links) National Cancer Institute: Lung Cancer Overview National Cancer Institute: Lung Cancer Prevention ...

  17. Genetics Home Reference: achondroplasia

    Science.gov (United States)

    ... Share: Email Facebook Twitter Home Health Conditions Achondroplasia Achondroplasia Printable PDF Open All Close All Enable Javascript to view the expand/collapse boxes. Description Achondroplasia is a form of short-limbed dwarfism. The ...

  18. Genetics Home Reference: boomerang dysplasia

    Science.gov (United States)

    ... Email Facebook Twitter Home Health Conditions Boomerang dysplasia Boomerang dysplasia Printable PDF Open All Close All Enable Javascript to view the expand/collapse boxes. Description Boomerang dysplasia is a disorder that affects the development ...

  19. Genetics Home Reference: X-linked creatine deficiency

    Science.gov (United States)

    ... Health Conditions X-linked creatine deficiency X-linked creatine deficiency Printable PDF Open All Close All Enable ... view the expand/collapse boxes. Description X-linked creatine deficiency is an inherited disorder that primarily affects ...

  20. Genetics Home Reference: hereditary pancreatitis

    Science.gov (United States)

    ... Facebook Twitter Home Health Conditions Hereditary pancreatitis Hereditary pancreatitis Printable PDF Open All Close All Enable Javascript to view the expand/collapse boxes. Description Hereditary pancreatitis is a genetic condition characterized by recurrent episodes ...

  1. Genetics Home Reference: familial atrial fibrillation

    Science.gov (United States)

    ... Twitter Home Health Conditions Familial atrial fibrillation Familial atrial fibrillation Printable PDF Open All Close All Enable Javascript to view the expand/collapse boxes. Description Familial atrial fibrillation is an inherited abnormality of the heart's normal ...

  2. Genetics Home Reference: hereditary sensory neuropathy type IA

    Science.gov (United States)

    ... sensory neuropathy type IA Hereditary sensory neuropathy type IA Printable PDF Open All Close All Enable Javascript ... expand/collapse boxes. Description Hereditary sensory neuropathy type IA is a condition characterized by nerve abnormalities in ...

  3. Genetics Home Reference: phenylketonuria

    Science.gov (United States)

    ... Share: Email Facebook Twitter Home Health Conditions Phenylketonuria Phenylketonuria Printable PDF Open All Close All Enable Javascript to view the expand/collapse boxes. Description Phenylketonuria (commonly known as PKU) is an inherited disorder ...

  4. Genetics Home Reference: myopathy with deficiency of iron-sulfur cluster assembly enzyme

    Science.gov (United States)

    ... Myopathy with deficiency of iron-sulfur cluster assembly enzyme Printable PDF Open All Close All Enable Javascript ... Myopathy with deficiency of iron-sulfur cluster assembly enzyme is an inherited disorder that primarily affects muscles ...

  5. Genetics Home Reference: bipolar disorder

    Science.gov (United States)

    ... Email Facebook Twitter Home Health Conditions Bipolar disorder Bipolar disorder Printable PDF Open All Close All Enable Javascript to view the expand/collapse boxes. Description Bipolar disorder is a mental health condition that causes extreme ...

  6. Genetics Home Reference: congenital mirror movement disorder

    Science.gov (United States)

    ... Health Conditions Congenital mirror movement disorder Congenital mirror movement disorder Printable PDF Open All Close All Enable ... view the expand/collapse boxes. Description Congenital mirror movement disorder is a condition in which intentional movements ...

  7. Genetics Home Reference: carnitine-acylcarnitine translocase deficiency

    Science.gov (United States)

    ... Email Facebook Twitter Home Health Conditions CACT deficiency Carnitine-acylcarnitine translocase deficiency Printable PDF Open All Close ... Javascript to view the expand/collapse boxes. Description Carnitine-acylcarnitine translocase (CACT) deficiency is a condition that ...

  8. Genetics Home Reference: rheumatoid arthritis

    Science.gov (United States)

    ... Share: Email Facebook Twitter Home Health Conditions Rheumatoid arthritis Rheumatoid arthritis Printable PDF Open All Close All Enable ... in my area? Other Names for This Condition arthritis, rheumatoid RA Related Information How are genetic conditions and ...

  9. Genetics Home Reference: schizophrenia

    Science.gov (United States)

    ... Share: Email Facebook Twitter Home Health Conditions Schizophrenia Schizophrenia Printable PDF Open All Close All Enable Javascript to view the expand/collapse boxes. Description Schizophrenia is a brain disorder classified as a psychosis, ...

  10. Genetics Home Reference: CDKL5 deficiency disorder

    Science.gov (United States)

    ... Facebook Twitter Home Health Conditions CDKL5 deficiency disorder CDKL5 deficiency disorder Printable PDF Open All Close All ... Javascript to view the expand/collapse boxes. Description CDKL5 deficiency disorder is characterized by seizures that begin ...

  11. Genetics Home Reference: familial male-limited precocious puberty

    Science.gov (United States)

    ... male-limited precocious puberty Familial male-limited precocious puberty Printable PDF Open All Close All Enable Javascript ... expand/collapse boxes. Description Familial male-limited precocious puberty is a condition that causes early sexual development ...

  12. Genetics Home Reference: clopidogrel resistance

    Science.gov (United States)

    ... Facebook Twitter Home Health Conditions Clopidogrel resistance Clopidogrel resistance Printable PDF Open All Close All Enable Javascript to view the expand/collapse boxes. Description Clopidogrel resistance is a condition in which the drug clopidogrel ...

  13. Genetics Home Reference: 46,XX testicular disorder of sex development

    Science.gov (United States)

    ... 46,XX testicular disorder of sex development 46,XX testicular disorder of sex development Printable PDF Open ... to view the expand/collapse boxes. Description 46,XX testicular disorder of sex development is a condition ...

  14. Genetics Home Reference: hereditary fructose intolerance

    Science.gov (United States)

    ... Twitter Home Health Conditions Hereditary fructose intolerance Hereditary fructose intolerance Printable PDF Open All Close All Enable ... to view the expand/collapse boxes. Description Hereditary fructose intolerance is a condition that affects a person's ...

  15. Genetics Home Reference: adolescent idiopathic scoliosis

    Science.gov (United States)

    ... Facebook Twitter Home Health Conditions Adolescent idiopathic scoliosis Adolescent idiopathic scoliosis Printable PDF Open All Close All ... Javascript to view the expand/collapse boxes. Description Adolescent idiopathic scoliosis is an abnormal curvature of the ...

  16. Genetics Home Reference: familial candidiasis

    Science.gov (United States)

    ... Facebook Twitter Home Health Conditions Familial candidiasis Familial candidiasis Printable PDF Open All Close All Enable Javascript to view the expand/collapse boxes. Description Familial candidiasis is an inherited tendency to develop infections caused ...

  17. Genetics Home Reference: autoimmune polyendocrinopathy-candidiasis-ectodermal dystrophy

    Science.gov (United States)

    ... Facebook Twitter Home Health Conditions APECED Autoimmune polyendocrinopathy-candidiasis-ectodermal dystrophy Printable PDF Open All Close All ... view the expand/collapse boxes. Description Autoimmune polyendocrinopathy-candidiasis-ectodermal dystrophy ( APECED ) is an inherited condition that ...

  18. Genetics Home Reference: primary spontaneous pneumothorax

    Science.gov (United States)

    ... Home Health Conditions Primary spontaneous pneumothorax Primary spontaneous pneumothorax Printable PDF Open All Close All Enable Javascript ... view the expand/collapse boxes. Description Primary spontaneous pneumothorax is an abnormal accumulation of air in the ...

  19. Genetics Home Reference: Turner syndrome

    Science.gov (United States)

    ... Email Facebook Twitter Home Health Conditions Turner syndrome Turner syndrome Printable PDF Open All Close All Enable Javascript to view the expand/collapse boxes. Description Turner syndrome is a chromosomal condition that affects development in ...

  20. Genetics Home Reference: generalized pustular psoriasis

    Science.gov (United States)

    ... Home Health Conditions Generalized pustular psoriasis Generalized pustular psoriasis Printable PDF Open All Close All Enable Javascript ... view the expand/collapse boxes. Description Generalized pustular psoriasis (GPP) is a severe form of a skin ...

  1. Genetics Home Reference: erythrokeratodermia variabilis et progressiva

    Science.gov (United States)

    ... Facebook Twitter Home Health Conditions EKVP Erythrokeratodermia variabilis et progressiva Printable PDF Open All Close All Enable ... view the expand/collapse boxes. Description Erythrokeratodermia variabilis et progressiva ( EKVP ) is a skin disorder that is ...

  2. Genetics Home Reference: myostatin-related muscle hypertrophy

    Science.gov (United States)

    ... Twitter Home Health Conditions Myostatin-related muscle hypertrophy Myostatin-related muscle hypertrophy Printable PDF Open All Close ... Javascript to view the expand/collapse boxes. Description Myostatin-related muscle hypertrophy is a rare condition characterized ...

  3. Genetics Home Reference: essential tremor

    Science.gov (United States)

    ... Facebook Twitter Home Health Conditions Essential tremor Essential tremor Printable PDF Open All Close All Enable Javascript to view the expand/collapse boxes. Description Essential tremor is a movement disorder that causes involuntary, rhythmic ...

  4. Genetics Home Reference: gestational diabetes

    Science.gov (United States)

    ... Email Facebook Twitter Home Health Conditions Gestational diabetes Gestational diabetes Printable PDF Open All Close All Enable Javascript to view the expand/collapse boxes. Description Gestational diabetes is a disorder characterized by abnormally high blood ...

  5. Genetics Home Reference: alpha thalassemia X-linked intellectual disability syndrome

    Science.gov (United States)

    ... Alpha thalassemia X-linked intellectual disability syndrome Alpha thalassemia X-linked intellectual disability syndrome Printable PDF Open ... to view the expand/collapse boxes. Description Alpha thalassemia X-linked intellectual disability syndrome is an inherited ...

  6. Genetics Home Reference: beta thalassemia

    Science.gov (United States)

    ... Facebook Twitter Home Health Conditions Beta thalassemia Beta thalassemia Printable PDF Open All Close All Enable Javascript to view the expand/collapse boxes. Description Beta thalassemia is a blood disorder that reduces the production ...

  7. Genetics Home Reference: alpha thalassemia

    Science.gov (United States)

    ... Facebook Twitter Home Health Conditions Alpha thalassemia Alpha thalassemia Printable PDF Open All Close All Enable Javascript to view the expand/collapse boxes. Description Alpha thalassemia is a blood disorder that reduces the production ...

  8. Genetics Home Reference: sporadic hemiplegic migraine

    Science.gov (United States)

    ... Home Health Conditions Sporadic hemiplegic migraine Sporadic hemiplegic migraine Printable PDF Open All Close All Enable Javascript ... view the expand/collapse boxes. Description Sporadic hemiplegic migraine is a rare form of migraine headache. Migraines ...

  9. Genetics Home Reference: depression

    Science.gov (United States)

    ... Share: Email Facebook Twitter Home Health Conditions Depression Depression Printable PDF Open All Close All Enable Javascript to view the expand/collapse boxes. Description Depression (also known as major depression or major depressive ...

  10. Genetics Home Reference: alkaptonuria

    Science.gov (United States)

    ... Share: Email Facebook Twitter Home Health Conditions Alkaptonuria Alkaptonuria Printable PDF Open All Close All Enable Javascript to view the expand/collapse boxes. Description Alkaptonuria is an inherited condition that causes urine to ...

  11. Travelers' Health: Hepatitis C

    Science.gov (United States)

    ... Chapter 3 - Hepatitis B Chapter 3 - Hepatitis E Hepatitis C Deborah Holtzman INFECTIOUS AGENT Hepatitis C virus ( ... mother to child. Map 3-05. Prevalence of hepatitis C virus infection 1 PDF Version (printable) 1 ...

  12. Genetics Home Reference: antiphospholipid syndrome

    Science.gov (United States)

    ... Share: Email Facebook Twitter Home Health Conditions Antiphospholipid syndrome Antiphospholipid syndrome Printable PDF Open All Close All Enable ... area? Other Names for This Condition anti-phospholipid syndrome antiphospholipid antibody syndrome Hughes syndrome Related Information How are ...

  13. Travelers' Health: Hepatitis B

    Science.gov (United States)

    ... Chapter 3 - Hepatitis A Chapter 3 - Hepatitis C Hepatitis B Francisco Averhoff INFECTIOUS AGENT Hepatitis B virus ( ... progression of disease. Map 3-04. Prevalence of hepatitis B virus infection 1 PDF Version (printable) 1 ...

  14. Genetics Home Reference: opioid addiction

    Science.gov (United States)

    ... Facebook Twitter Home Health Conditions Opioid addiction Opioid addiction Printable PDF Open All Close All Enable Javascript to view the expand/collapse boxes. Description Opioid addiction is a long-lasting (chronic) disease that can ...

  15. Genetics Home Reference: systemic scleroderma

    Science.gov (United States)

    ... Facebook Twitter Home Health Conditions Systemic scleroderma Systemic scleroderma Printable PDF Open All Close All Enable Javascript to view the expand/collapse boxes. Description Systemic scleroderma is an autoimmune disorder that affects the skin ...

  16. Genetics Home Reference: Smith-Lemli-Opitz syndrome

    Science.gov (United States)

    ... Twitter Home Health Conditions Smith-Lemli-Opitz syndrome Smith-Lemli-Opitz syndrome Printable PDF Open All Close ... Javascript to view the expand/collapse boxes. Description Smith-Lemli-Opitz syndrome is a developmental disorder that ...

  17. Genetics Home Reference: hereditary diffuse gastric cancer

    Science.gov (United States)

    ... Health Conditions Hereditary diffuse gastric cancer Hereditary diffuse gastric cancer Printable PDF Open All Close All Enable Javascript ... Diffuse Gastric Cancer MedlinePlus Encyclopedia: Gastric Cancer National Cancer ... Option Overview General Information from MedlinePlus ( ...

  18. Genetics Home Reference: preeclampsia

    Science.gov (United States)

    ... Share: Email Facebook Twitter Home Health Conditions Preeclampsia Preeclampsia Printable PDF Open All Close All Enable Javascript to view the expand/collapse boxes. Description Preeclampsia is a complication of pregnancy in which affected ...

  19. Genetics Home Reference: familial encephalopathy with neuroserpin inclusion bodies

    Science.gov (United States)

    ... Home Health Conditions FENIB Familial encephalopathy with neuroserpin inclusion bodies Printable PDF Open All Close All Enable ... expand/collapse boxes. Description Familial encephalopathy with neuroserpin inclusion bodies ( FENIB ) is a disorder that causes progressive ...

  20. Genetics Home Reference: Coffin-Siris syndrome

    Science.gov (United States)

    ... Facebook Twitter Home Health Conditions Coffin-Siris syndrome Coffin-Siris syndrome Printable PDF Open All Close All Enable Javascript to view the expand/collapse boxes. Description Coffin-Siris syndrome is a condition that affects several body ...

  1. Genetics Home Reference: polycythemia vera

    Science.gov (United States)

    ... Email Facebook Twitter Home Health Conditions Polycythemia vera Polycythemia vera Printable PDF Open All Close All Enable Javascript to view the expand/collapse boxes. Description Polycythemia vera is a condition characterized by an increased ...

  2. Genetics Home Reference: hereditary leiomyomatosis and renal cell cancer

    Science.gov (United States)

    ... Home Health Conditions HLRCC Hereditary leiomyomatosis and renal cell cancer Printable PDF Open All Close All Enable Javascript ... expand/collapse boxes. Description Hereditary leiomyomatosis and renal cell cancer ( HLRCC ) is a disorder in which affected individuals ...

  3. Genetics Home Reference: Usher syndrome

    Science.gov (United States)

    ... Email Facebook Twitter Home Health Conditions Usher syndrome Usher syndrome Printable PDF Open All Close All Enable Javascript to view the expand/collapse boxes. Description Usher syndrome is a condition characterized by partial or total ...

  4. Genetics Home Reference: Alzheimer disease

    Science.gov (United States)

    ... Email Facebook Twitter Home Health Conditions Alzheimer disease Alzheimer disease Printable PDF Open All Close All Enable Javascript to view the expand/collapse boxes. Description Alzheimer disease is a degenerative disease of the brain ...

  5. Genetics Home Reference: Ohdo syndrome, Say-Barber-Biesecker-Young-Simpson variant

    Science.gov (United States)

    ... SBBYS variant Ohdo syndrome, Say-Barber-Biesecker-Young-Simpson variant Printable PDF Open All Close All Enable ... collapse boxes. Description The Say-Barber-Biesecker-Young-Simpson (SBBYS) variant of Ohdo syndrome is a rare ...

  6. Genetics Home Reference: congenital hypothyroidism

    Science.gov (United States)

    ... Facebook Twitter Home Health Conditions Congenital hypothyroidism Congenital hypothyroidism Printable PDF Open All Close All Enable Javascript to view the expand/collapse boxes. Description Congenital hypothyroidism is a partial or complete loss of function ...

  7. Genetics Home Reference: breast cancer

    Science.gov (United States)

    ... Email Facebook Twitter Home Health Conditions Breast cancer Breast cancer Printable PDF Open All Close All Enable Javascript to view the expand/collapse boxes. Description Breast cancer is a disease in which certain cells in ...

  8. Genetics Home Reference: tyrosine hydroxylase deficiency

    Science.gov (United States)

    ... Email Facebook Twitter Home Health Conditions TH deficiency Tyrosine hydroxylase deficiency Printable PDF Open All Close All ... Javascript to view the expand/collapse boxes. Description Tyrosine hydroxylase (TH) deficiency is a disorder that primarily ...

  9. Genetics Home Reference: Norrie disease

    Science.gov (United States)

    ... Email Facebook Twitter Home Health Conditions Norrie disease Norrie disease Printable PDF Open All Close All Enable Javascript to view the expand/collapse boxes. Description Norrie disease is an inherited eye disorder that leads to ...

  10. Genetics Home Reference: Bartter syndrome

    Science.gov (United States)

    ... Email Facebook Twitter Home Health Conditions Bartter syndrome Bartter syndrome Printable PDF Open All Close All Enable Javascript to view the expand/collapse boxes. Description Bartter syndrome is a group of very similar kidney disorders ...

  11. Genetics Home Reference: Hashimoto thyroiditis

    Science.gov (United States)

    ... Facebook Twitter Home Health Conditions Hashimoto thyroiditis Hashimoto thyroiditis Printable PDF Open All Close All Enable Javascript to view the expand/collapse boxes. Description Hashimoto thyroiditis is a condition that affects the function of ...

  12. Genetics Home Reference: Diamond-Blackfan anemia

    Science.gov (United States)

    ... Home Health Conditions Diamond-Blackfan anemia Diamond-Blackfan anemia Printable PDF Open All Close All Enable Javascript ... view the expand/collapse boxes. Description Diamond-Blackfan anemia is a disorder of the bone marrow . The ...

  13. Genetics Home Reference: X-linked sideroblastic anemia

    Science.gov (United States)

    ... Conditions X-linked sideroblastic anemia X-linked sideroblastic anemia Printable PDF Open All Close All Enable Javascript ... the expand/collapse boxes. Description X-linked sideroblastic anemia is an inherited disorder that prevents developing red ...

  14. Genetics Home Reference: iron-refractory iron deficiency anemia

    Science.gov (United States)

    ... refractory iron deficiency anemia Iron-refractory iron deficiency anemia Printable PDF Open All Close All Enable Javascript ... expand/collapse boxes. Description Iron-refractory iron deficiency anemia is one of many types of anemia , which ...

  15. Genetics Home Reference: congenital dyserythropoietic anemia

    Science.gov (United States)

    ... Facebook Twitter Home Health Conditions CDA Congenital dyserythropoietic anemia Printable PDF Open All Close All Enable Javascript ... view the expand/collapse boxes. Description Congenital dyserythropoietic anemia ( CDA ) is an inherited blood disorder that affects ...

  16. Genetics Home Reference: thiamine-responsive megaloblastic anemia syndrome

    Science.gov (United States)

    ... Thiamine-responsive megaloblastic anemia syndrome Thiamine-responsive megaloblastic anemia syndrome Printable PDF Open All Close All Enable ... the expand/collapse boxes. Description Thiamine-responsive megaloblastic anemia syndrome is a rare condition characterized by hearing ...

  17. Genetics Home Reference: X-linked sideroblastic anemia and ataxia

    Science.gov (United States)

    ... linked sideroblastic anemia and ataxia X-linked sideroblastic anemia and ataxia Printable PDF Open All Close All ... the expand/collapse boxes. Description X-linked sideroblastic anemia and ataxia is a rare condition characterized by ...

  18. Genetics Home Reference: glycogen storage disease type VII

    Science.gov (United States)

    ... Home Health Conditions Glycogen storage disease type VII Glycogen storage disease type VII Printable PDF Open All ... Javascript to view the expand/collapse boxes. Description Glycogen storage disease type VII (GSDVII) is an inherited ...

  19. Genetics Home Reference: glycogen storage disease type IV

    Science.gov (United States)

    ... Home Health Conditions Glycogen storage disease type IV Glycogen storage disease type IV Printable PDF Open All ... Javascript to view the expand/collapse boxes. Description Glycogen storage disease type IV (GSD IV) is an ...

  20. Genetics Home Reference: warfarin sensitivity

    Science.gov (United States)

    ... Email Facebook Twitter Home Health Conditions Warfarin sensitivity Warfarin sensitivity Printable PDF Open All Close All Enable Javascript to view the expand/collapse boxes. Description Warfarin sensitivity is a condition in which individuals have ...

  1. Genetics Home Reference: warfarin resistance

    Science.gov (United States)

    ... Email Facebook Twitter Home Health Conditions Warfarin resistance Warfarin resistance Printable PDF Open All Close All Enable Javascript to view the expand/collapse boxes. Description Warfarin resistance is a condition in which individuals have ...

  2. Genetics Home Reference: pulmonary arterial hypertension

    Science.gov (United States)

    ... Home Health Conditions Pulmonary arterial hypertension Pulmonary arterial hypertension Printable PDF Open All Close All Enable Javascript ... view the expand/collapse boxes. Description Pulmonary arterial hypertension is a progressive disorder characterized by abnormally high ...

  3. Genetics Home Reference: amelogenesis imperfecta

    Science.gov (United States)

    ... Email Facebook Twitter Home Health Conditions Amelogenesis imperfecta Amelogenesis imperfecta Printable PDF Open All Close All Enable Javascript to view the expand/collapse boxes. Description Amelogenesis imperfecta is a disorder of tooth development. This ...

  4. Genetics Home Reference: CATSPER1-related nonsyndromic male infertility

    Science.gov (United States)

    ... related nonsyndromic male infertility CATSPER1-related nonsyndromic male infertility Printable PDF Open All Close All Enable Javascript ... expand/collapse boxes. Description CATSPER1 -related nonsyndromic male infertility is a condition that affects the function of ...

  5. Genetics Home Reference: sensorineural deafness and male infertility

    Science.gov (United States)

    ... deafness and male infertility Sensorineural deafness and male infertility Printable PDF Open All Close All Enable Javascript ... expand/collapse boxes. Description Sensorineural deafness and male infertility is a condition characterized by hearing loss and ...

  6. Genetics Home Reference: acral peeling skin syndrome

    Science.gov (United States)

    ... Home Health Conditions Acral peeling skin syndrome Acral peeling skin syndrome Printable PDF Open All Close All ... to view the expand/collapse boxes. Description Acral peeling skin syndrome is a skin disorder characterized by ...

  7. Genetics Home Reference: Graves disease

    Science.gov (United States)

    ... Email Facebook Twitter Home Health Conditions Graves disease Graves disease Printable PDF Open All Close All Enable Javascript to view the expand/collapse boxes. Description Graves disease is a condition that affects the function of ...

  8. Genetics Home Reference: hyperparathyroidism-jaw tumor syndrome

    Science.gov (United States)

    ... Twitter Home Health Conditions Hyperparathyroidism-jaw tumor syndrome Hyperparathyroidism-jaw tumor syndrome Printable PDF Open All Close ... Javascript to view the expand/collapse boxes. Description Hyperparathyroidism-jaw tumor syndrome is a condition characterized by ...

  9. Genetics Home Reference: Pearson marrow-pancreas syndrome

    Science.gov (United States)

    ... Health Conditions Pearson marrow-pancreas syndrome Pearson marrow-pancreas syndrome Printable PDF Open All Close All Enable ... view the expand/collapse boxes. Description Pearson marrow-pancreas syndrome is a severe disorder that usually begins ...

  10. Genetics Home Reference: fragile X-associated primary ovarian insufficiency

    Science.gov (United States)

    ... Share: Email Facebook Twitter Home Health Conditions FXPOI Fragile X-associated primary ovarian insufficiency Printable PDF Open All ... Javascript to view the expand/collapse boxes. Description Fragile X-associated primary ovarian insufficiency ( FXPOI ) is a condition ...

  11. Genetics Home Reference: fragile X syndrome

    Science.gov (United States)

    ... Facebook Twitter Home Health Conditions Fragile X syndrome Fragile X syndrome Printable PDF Open All Close All Enable Javascript to view the expand/collapse boxes. Description Fragile X syndrome is a genetic condition that causes a ...

  12. Combined in situ PXRD and PDF study of hydrothermal formation of α- and β-MnO2 nanocrystallites

    DEFF Research Database (Denmark)

    Birgisson, Steinar; Shen, Yanbin; Saha, Dipankar

    resolved powder X-ray diffraction (PXRD) and total scattering (TS) data is then measured using synchrotron radiation.[5, 6] By Rietveld refinement of PXRD data, information about the quantity of different crystalline phases, unit cell size, crystallite size and morphology as function of reaction time...... it looks like the smallest α-MnO2 nanocrystallites transform to β-MnO2 first, before subsequent transformation of larger crystallites. 1. Thackeray, M.M., Manganese oxides for lithium batteries. Progress in Solid State Chemistry, 1997. 25(1–2): p. 1-71. 2. Palomares, V., et al., Update on Na-based battery...

  13. TURBULENCE SETS THE INITIAL CONDITIONS FOR STAR FORMATION IN HIGH-PRESSURE ENVIRONMENTS

    International Nuclear Information System (INIS)

    Rathborne, J. M.; Contreras, Y.; Longmore, S. N.; Bastian, N.; Jackson, J. M.; Kruijssen, J. M. D.; Alves, J. F.; Bally, J.; Foster, J. B.; Garay, G.; Testi, L.; Walsh, A. J.

    2014-01-01

    Despite the simplicity of theoretical models of supersonically turbulent, isothermal media, their predictions successfully match the observed gas structure and star formation activity within low-pressure (P/k < 10 5 K cm –3 ) molecular clouds in the solar neighborhood. However, it is unknown whether or not these theories extend to clouds in high-pressure (P/k > 10 7 K cm –3 ) environments, like those in the Galaxy's inner 200 pc central molecular zone (CMZ) and in the early universe. Here, we present Atacama Large Millimeter/submillimeter Array 3 mm dust continuum emission within a cloud, G0.253+0.016, which is immersed in the high-pressure environment of the CMZ. While the log-normal shape and dispersion of its column density probability distribution function (PDF) are strikingly similar to those of solar neighborhood clouds, there is one important quantitative difference: its mean column density is one to two orders of magnitude higher. Both the similarity and difference in the PDF compared to those derived from solar neighborhood clouds match predictions of turbulent cloud models given the high-pressure environment of the CMZ. The PDF shows a small deviation from log-normal at high column densities confirming the youth of G0.253+0.016. Its lack of star formation is consistent with the theoretically predicted, environmentally dependent volume density threshold for star formation which is orders of magnitude higher than that derived for solar neighborhood clouds. Our results provide the first empirical evidence that the current theoretical understanding of molecular cloud structure derived from the solar neighborhood also holds in high-pressure environments. We therefore suggest that these theories may be applicable to understand star formation in the early universe

  14. TURBULENCE SETS THE INITIAL CONDITIONS FOR STAR FORMATION IN HIGH-PRESSURE ENVIRONMENTS

    Energy Technology Data Exchange (ETDEWEB)

    Rathborne, J. M.; Contreras, Y. [CSIRO Astronomy and Space Science, P.O. Box 76, Epping NSW, 1710 (Australia); Longmore, S. N.; Bastian, N. [Astrophysics Research Institute, Liverpool John Moores University, 146 Brownlow Hill, Liverpool L3 5RF (United Kingdom); Jackson, J. M. [Institute for Astrophysical Research, Boston University, Boston, MA 02215 (United States); Kruijssen, J. M. D. [Max-Planck Institut fur Astrophysik, Karl-Schwarzschild-Strasse 1, D-85748, Garching (Germany); Alves, J. F. [University of Vienna, Türkenschanzstrasse 17, A-1180 Vienna (Austria); Bally, J. [Center for Astrophysics and Space Astronomy, University of Colorado, UCB 389, Boulder, CO 8030 (United States); Foster, J. B. [Department of Astronomy, Yale University, P.O. Box 208101 New Haven, CT 06520-8101 (United States); Garay, G. [Universidad de Chile, Camino El Observatorio1515, Las Condes, Santiago (Chile); Testi, L. [European Southern Observatory, Karl-Schwarzschild-Strasse 2, D-85748 Garching bei Munchen (Germany); Walsh, A. J., E-mail: Jill.Rathborne@csiro.au [International Centre for Radio Astronomy Research, Curtin University, GPO Box U1987, Perth (Australia)

    2014-11-10

    Despite the simplicity of theoretical models of supersonically turbulent, isothermal media, their predictions successfully match the observed gas structure and star formation activity within low-pressure (P/k < 10{sup 5} K cm{sup –3}) molecular clouds in the solar neighborhood. However, it is unknown whether or not these theories extend to clouds in high-pressure (P/k > 10{sup 7} K cm{sup –3}) environments, like those in the Galaxy's inner 200 pc central molecular zone (CMZ) and in the early universe. Here, we present Atacama Large Millimeter/submillimeter Array 3 mm dust continuum emission within a cloud, G0.253+0.016, which is immersed in the high-pressure environment of the CMZ. While the log-normal shape and dispersion of its column density probability distribution function (PDF) are strikingly similar to those of solar neighborhood clouds, there is one important quantitative difference: its mean column density is one to two orders of magnitude higher. Both the similarity and difference in the PDF compared to those derived from solar neighborhood clouds match predictions of turbulent cloud models given the high-pressure environment of the CMZ. The PDF shows a small deviation from log-normal at high column densities confirming the youth of G0.253+0.016. Its lack of star formation is consistent with the theoretically predicted, environmentally dependent volume density threshold for star formation which is orders of magnitude higher than that derived for solar neighborhood clouds. Our results provide the first empirical evidence that the current theoretical understanding of molecular cloud structure derived from the solar neighborhood also holds in high-pressure environments. We therefore suggest that these theories may be applicable to understand star formation in the early universe.

  15. Rates of star formation

    International Nuclear Information System (INIS)

    Larson, R.B.

    1977-01-01

    It is illustrated that a theoretical understanding of the formation and evolution of galaxies depends on an understanding of star formation, and especially of the factors influencing the rate of star formation. Some of the theoretical problems of star formation in galaxies, some approaches that have been considered in models of galaxy evolution, and some possible observational tests that may help to clarify which processes or models are most relevant are reviewed. The material is presented under the following headings: power-law models for star formation, star formation processes (conditions required, ways of achieving these conditions), observational indications and tests, and measures of star formation rates in galaxies. 49 references

  16. Why adult formation

    Directory of Open Access Journals (Sweden)

    Andrej Justinek

    1997-01-01

    Full Text Available The article argues that the primary aim of adult formation is comprehensive personality development which is supposed to ensure quality existence in modern world. The article also suggests that formarion is a permanent process. Justinek puts special emphasis on adult formation methodology and defines fundamental formation styles which encourage independent action in individuals. Justinek differentiates between formation and education. methods and concludes that formation methods are related to the emotional sphere of personality, and education methods mostly to the rational. Justinek believes that formation of adults is based primarily on appropriate formation methodology.

  17. Charm and beauty quark masses in the MMHT2014 global PDF analysis

    Energy Technology Data Exchange (ETDEWEB)

    Harland-Lang, L.A.; Motylinski, P.; Thorne, R.S. [University College London, Department of Physics and Astronomy, London (United Kingdom); Martin, A.D. [Durham University, Institute for Particle Physics Phenomenology, Durham (United Kingdom)

    2016-01-15

    We investigate the variation in the MMHT2014 PDFs when we allow the heavy-quark masses m{sub c} and m{sub b} to vary away from their default values.Wemake PDF sets available in steps of Δm{sub c} = 0.05 GeV and Δm{sub b} = 0.25 GeV, and present the variation in the PDFs and in the predictions. We examine the comparison to the HERA data on charm and beauty structure functions and note that in each case the heavy-quark data, and the inclusive data, have a slight preference for lower masses than our default values.We provide PDF sets with three and four active quark flavours, as well as the standard value of five flavours. We use the pole mass definition of the quark masses, as in the default MMHT2014 analysis, but briefly comment on the MS definition. (orig.)

  18. Charm and beauty quark masses in the MMHT2014 global PDF analysis

    Energy Technology Data Exchange (ETDEWEB)

    Harland-Lang, L. A. [Department of Physics and Astronomy, University College London, WC1E 6BT, London (United Kingdom); Martin, A. D. [Institute for Particle Physics Phenomenology, Durham University, DH1 3LE, Durham (United Kingdom); Motylinski, P.; Thorne, R. S., E-mail: thorne@hep.ucl.ac.uk [Department of Physics and Astronomy, University College London, WC1E 6BT, London (United Kingdom)

    2016-01-06

    We investigate the variation in the MMHT2014 PDFs when we allow the heavy-quark masses m{sub c} and m{sub b} to vary away from their default values. We make PDF sets available in steps of Δm{sub c}=0.05 GeV and Δm{sub b}=0.25 GeV, and present the variation in the PDFs and in the predictions. We examine the comparison to the HERA data on charm and beauty structure functions and note that in each case the heavy-quark data, and the inclusive data, have a slight preference for lower masses than our default values. We provide PDF sets with three and four active quark flavours, as well as the standard value of five flavours. We use the pole mass definition of the quark masses, as in the default MMHT2014 analysis, but briefly comment on the (MS)-bar definition.

  19. Charm and beauty quark masses in the MMHT2014 global PDF analysis.

    Science.gov (United States)

    Harland-Lang, L A; Martin, A D; Motylinski, P; Thorne, R S

    We investigate the variation in the MMHT2014 PDFs when we allow the heavy-quark masses [Formula: see text] and [Formula: see text] to vary away from their default values. We make PDF sets available in steps of [Formula: see text] and [Formula: see text], and present the variation in the PDFs and in the predictions. We examine the comparison to the HERA data on charm and beauty structure functions and note that in each case the heavy-quark data, and the inclusive data, have a slight preference for lower masses than our default values. We provide PDF sets with three and four active quark flavours, as well as the standard value of five flavours. We use the pole mass definition of the quark masses, as in the default MMHT2014 analysis, but briefly comment on the [Formula: see text] definition.

  20. An Investigation of a Hybrid Mixing Model for PDF Simulations of Turbulent Premixed Flames

    Science.gov (United States)

    Zhou, Hua; Li, Shan; Wang, Hu; Ren, Zhuyin

    2015-11-01

    Predictive simulations of turbulent premixed flames over a wide range of Damköhler numbers in the framework of Probability Density Function (PDF) method still remain challenging due to the deficiency in current micro-mixing models. In this work, a hybrid micro-mixing model, valid in both the flamelet regime and broken reaction zone regime, is proposed. A priori testing of this model is first performed by examining the conditional scalar dissipation rate and conditional scalar diffusion in a 3-D direct numerical simulation dataset of a temporally evolving turbulent slot jet flame of lean premixed H2-air in the thin reaction zone regime. Then, this new model is applied to PDF simulations of the Piloted Premixed Jet Burner (PPJB) flames, which are a set of highly shear turbulent premixed flames and feature strong turbulence-chemistry interaction at high Reynolds and Karlovitz numbers. Supported by NSFC 51476087 and NSFC 91441202.

  1. aMCfast: automation of fast NLO computations for PDF fits

    CERN Document Server

    Bertone, Valerio; Frixione, Stefano; Rojo, Juan; Sutton, Mark

    2014-01-01

    We present the interface between MadGraph5_aMC@NLO, a self-contained program that calculates cross sections up to next-to-leading order accuracy in an automated manner, and APPLgrid, a code that parametrises such cross sections in the form of look-up tables which can be used for the fast computations needed in the context of PDF fits. The main characteristic of this interface, which we dub aMCfast, is its being fully automated as well, which removes the need to extract manually the process-specific information for additional physics processes, as is the case with other matrix element calculators, and renders it straightforward to include any new process in the PDF fits. We demonstrate this by studying several cases which are easily measured at the LHC, have a good constraining power on PDFs, and some of which were previously unavailable in the form of a fast interface.

  2. Formate Formation and Formate Conversion in Biological Fuels Production

    Directory of Open Access Journals (Sweden)

    Bryan R. Crable

    2011-01-01

    Full Text Available Biomethanation is a mature technology for fuel production. Fourth generation biofuels research will focus on sequestering CO2 and providing carbon-neutral or carbon-negative strategies to cope with dwindling fossil fuel supplies and environmental impact. Formate is an important intermediate in the methanogenic breakdown of complex organic material and serves as an important precursor for biological fuels production in the form of methane, hydrogen, and potentially methanol. Formate is produced by either CoA-dependent cleavage of pyruvate or enzymatic reduction of CO2 in an NADH- or ferredoxin-dependent manner. Formate is consumed through oxidation to CO2 and H2 or can be further reduced via the Wood-Ljungdahl pathway for carbon fixation or industrially for the production of methanol. Here, we review the enzymes involved in the interconversion of formate and discuss potential applications for biofuels production.

  3. The resolved star formation history of M51a through successive Bayesian marginalization

    Science.gov (United States)

    Martínez-García, Eric E.; Bruzual, Gustavo; Magris C., Gladis; González-Lópezlira, Rosa A.

    2018-02-01

    We have obtained the time and space-resolved star formation history (SFH) of M51a (NGC 5194) by fitting Galaxy Evolution Explorer (GALEX), Sloan Digital Sky Survey and near-infrared pixel-by-pixel photometry to a comprehensive library of stellar population synthesis models drawn from the Synthetic Spectral Atlas of Galaxies (SSAG). We fit for each space-resolved element (pixel) an independent model where the SFH is averaged in 137 age bins, each one 100 Myr wide. We used the Bayesian Successive Priors (BSP) algorithm to mitigate the bias in the present-day spatial mass distribution. We test BSP with different prior probability distribution functions (PDFs); this exercise suggests that the best prior PDF is the one concordant with the spatial distribution of the stellar mass as inferred from the near-infrared images. We also demonstrate that varying the implicit prior PDF of the SFH in SSAG does not affect the results. By summing the contributions to the global star formation rate of each pixel, at each age bin, we have assembled the resolved SFH of the whole galaxy. According to these results, the star formation rate of M51a was exponentially increasing for the first 10 Gyr after the big bang, and then turned into an exponentially decreasing function until the present day. Superimposed, we find a main burst of star formation at t ≈ 11.9 Gyr after the big bang.

  4. JESS-D-16-00343 R1.pdf | forthcoming | jess | Volumes | public ...

    Indian Academy of Sciences (India)

    Home; public; Volumes; jess; forthcoming; JESS-D-16-00343 R1.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. 29th Mid-year meeting. Posted on 19 January 2018. The 29th Mid-year ...

  5. JESS-D-16-00284 R2.pdf | forthcoming | jess | Volumes | public ...

    Indian Academy of Sciences (India)

    Home; public; Volumes; jess; forthcoming; JESS-D-16-00284 R2.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. 29th Mid-year meeting. Posted on 19 January 2018. The 29th Mid-year ...

  6. JESS-D-16-00608 R1.pdf | forthcoming | jess | Volumes | public ...

    Indian Academy of Sciences (India)

    Home; public; Volumes; jess; forthcoming; JESS-D-16-00608 R1.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. 29th Mid-year meeting. Posted on 19 January 2018. The 29th Mid-year ...

  7. JESS-D-17-00011 R3.pdf | forthcoming | jess | Volumes | public ...

    Indian Academy of Sciences (India)

    Home; public; Volumes; jess; forthcoming; JESS-D-17-00011 R3.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. 29th Mid-year meeting. Posted on 19 January 2018. The 29th Mid-year ...

  8. JESS-D-16-00592 R1.pdf | forthcoming | jess | Volumes | public ...

    Indian Academy of Sciences (India)

    Home; public; Volumes; jess; forthcoming; JESS-D-16-00592 R1.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. 29th Mid-year meeting. Posted on 19 January 2018. The 29th Mid-year ...

  9. JESS-D-16-00539 R1.pdf | forthcoming | jess | Volumes | public ...

    Indian Academy of Sciences (India)

    Home; public; Volumes; jess; forthcoming; JESS-D-16-00539 R1.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. 29th Mid-year meeting. Posted on 19 January 2018. The 29th Mid-year ...

  10. JESS-D-16-00583 R1.pdf | forthcoming | jess | Volumes | public ...

    Indian Academy of Sciences (India)

    Home; public; Volumes; jess; forthcoming; JESS-D-16-00583 R1.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. 29th Mid-year meeting. Posted on 19 January 2018. The 29th Mid-year ...

  11. JESS-D-16-00331R1.pdf | forthcoming | jess | Volumes | public ...

    Indian Academy of Sciences (India)

    Home; public; Volumes; jess; forthcoming; JESS-D-16-00331R1.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. 29th Mid-year meeting. Posted on 19 January 2018. The 29th Mid-year ...

  12. JESS-D-16-00216R1.pdf | forthcoming | jess | Volumes | public ...

    Indian Academy of Sciences (India)

    Home; public; Volumes; jess; forthcoming; JESS-D-16-00216R1.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. 29th Mid-year meeting. Posted on 19 January 2018. The 29th Mid-year ...

  13. JESS-D-16-00462 R1.pdf | forthcoming | jess | Volumes | public ...

    Indian Academy of Sciences (India)

    Home; public; Volumes; jess; forthcoming; JESS-D-16-00462 R1.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. 29th Mid-year meeting. Posted on 19 January 2018. The 29th Mid-year ...

  14. JESS-D-16-00615 R1.pdf | forthcoming | jess | Volumes | public ...

    Indian Academy of Sciences (India)

    Home; public; Volumes; jess; forthcoming; JESS-D-16-00615 R1.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. 29th Mid-year meeting. Posted on 19 January 2018. The 29th Mid-year ...

  15. JESS-D-16-00069 R1.pdf | forthcoming | jess | Volumes | public ...

    Indian Academy of Sciences (India)

    Home; public; Volumes; jess; forthcoming; JESS-D-16-00069 R1.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. 29th Mid-year meeting. Posted on 19 January 2018. The 29th Mid-year ...

  16. JESS-D-16-00237 R1.pdf | forthcoming | jess | Volumes | public ...

    Indian Academy of Sciences (India)

    Home; public; Volumes; jess; forthcoming; JESS-D-16-00237 R1.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. 29th Mid-year meeting. Posted on 19 January 2018. The 29th Mid-year ...

  17. JESS-D-16-00189 R2.pdf | forthcoming | jess | Volumes | public ...

    Indian Academy of Sciences (India)

    Home; public; Volumes; jess; forthcoming; JESS-D-16-00189 R2.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. 29th Mid-year meeting. Posted on 19 January 2018. The 29th Mid-year ...

  18. JESS-D-16-00274 R2.pdf | forthcoming | jess | Volumes | public ...

    Indian Academy of Sciences (India)

    Home; public; Volumes; jess; forthcoming; JESS-D-16-00274 R2.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. 29th Mid-year meeting. Posted on 19 January 2018. The 29th Mid-year ...

  19. JESS-D-16-00379 R1.pdf | forthcoming | jess | Volumes | public ...

    Indian Academy of Sciences (India)

    Home; public; Volumes; jess; forthcoming; JESS-D-16-00379 R1.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. 29th Mid-year meeting. Posted on 19 January 2018. The 29th Mid-year ...

  20. JESS-D-16-00392 R2.pdf | forthcoming | jess | Volumes | public ...

    Indian Academy of Sciences (India)

    Home; public; Volumes; jess; forthcoming; JESS-D-16-00392 R2.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. 29th Mid-year meeting. Posted on 19 January 2018. The 29th Mid-year ...