PEMBUATAN PERANGKAT LUNAK PENGENALAN WAJAH MENGGUNAKAN PRINCIPAL COMPONENTS ANALYSIS

Directory of Open Access Journals (Sweden)

Kartika Gunadi

2001-01-01

Full Text Available Face recognition is one of many important researches, and today, many applications have implemented it. Through development of techniques like Principal Components Analysis (PCA, computers can now outperform human in many face recognition tasks, particularly those in which large database of faces must be searched. Principal Components Analysis was used to reduce facial image dimension into fewer variables, which are easier to observe and handle. Those variables then fed into artificial neural networks using backpropagation method to recognise the given facial image. The test results show that PCA can provide high face recognition accuracy. For the training faces, a correct identification of 100% could be obtained. From some of network combinations that have been tested, a best average correct identification of 91,11% could be obtained for the test faces while the worst average result is 46,67 % correct identification Abstract in Bahasa Indonesia : Pengenalan wajah manusia merupakan salah satu bidang penelitian yang penting, dan dewasa ini banyak aplikasi yang dapat menerapkannya. Melalui pengembangan suatu teknik seperti Principal Components Analysis (PCA, komputer sekarang dapat melebihi kemampuan otak manusia dalam berbagai tugas pengenalan wajah, terutama tugas-tugas yang membutuhkan pencarian pada database wajah yang besar. Principal Components Analysis digunakan untuk mereduksi dimensi gambar wajah sehingga menghasilkan variabel yang lebih sedikit yang lebih mudah untuk diobsevasi dan ditangani. Hasil yang diperoleh kemudian akan dimasukkan ke suatu jaringan saraf tiruan dengan metode Backpropagation untuk mengenali gambar wajah yang telah diinputkan ke dalam sistem. Hasil pengujian sistem menunjukkan bahwa penggunaan PCA untuk pengenalan wajah dapat memberikan tingkat akurasi yang cukup tinggi. Untuk gambar wajah yang diikutsertakankan dalam latihan, dapat diperoleh 100% identifikasi yang benar. Dari beberapa kombinasi jaringan yang

Principal Component Analysis of Body Measurements In Three ...

African Journals Online (AJOL)

This study was conducted to explore the relationship among body measurements in 3 strains of broilers chicken (Arbor Acre, Marshal and Ross) using principal component analysis with the view of identifying those components that define body conformation in broilers. A total of 180 birds were used, 60 per strain.

Cloud Masking for Remotely Sensed Data Using Spectral and Principal Components Analysis

Directory of Open Access Journals (Sweden)

A. Ahmad

2012-06-01

Full Text Available Two methods of cloud masking tuned to tropical conditions have been developed, based on spectral analysis and Principal Components Analysis (PCA of Moderate Resolution Imaging Spectroradiometer (MODIS data. In the spectral approach, thresholds were applied to four reflective bands (1, 2, 3, and 4, three thermal bands (29, 31 and 32, the band 2/band 1 ratio, and the difference between band 29 and 31 in order to detect clouds. The PCA approach applied a threshold to the first principal component derived from the seven quantities used for spectral analysis. Cloud detections were compared with the standard MODIS cloud mask, and their accuracy was assessed using reference images and geographical information on the study area.

Experimental and principal component analysis of waste ...

African Journals Online (AJOL)

The present study is aimed at determining through principal component analysis the most important variables affecting bacterial degradation in ponds. Data were collected from literature. In addition, samples were also collected from the waste stabilization ponds at the University of Nigeria, Nsukka and analyzed to ...

Functional principal component analysis of glomerular filtration rate curves after kidney transplant.

Science.gov (United States)

Dong, Jianghu J; Wang, Liangliang; Gill, Jagbir; Cao, Jiguo

2017-01-01

This article is motivated by some longitudinal clinical data of kidney transplant recipients, where kidney function progression is recorded as the estimated glomerular filtration rates at multiple time points post kidney transplantation. We propose to use the functional principal component analysis method to explore the major source of variations of glomerular filtration rate curves. We find that the estimated functional principal component scores can be used to cluster glomerular filtration rate curves. Ordering functional principal component scores can detect abnormal glomerular filtration rate curves. Finally, functional principal component analysis can effectively estimate missing glomerular filtration rate values and predict future glomerular filtration rate values.

Identifying the Component Structure of Satisfaction Scales by Nonlinear Principal Components Analysis

NARCIS (Netherlands)

Manisera, M.; Kooij, A.J. van der; Dusseldorp, E.

2010-01-01

The component structure of 14 Likert-type items measuring different aspects of job satisfaction was investigated using nonlinear Principal Components Analysis (NLPCA). NLPCA allows for analyzing these items at an ordinal or interval level. The participants were 2066 workers from five types of social

[Content of mineral elements of Gastrodia elata by principal components analysis].

Science.gov (United States)

Li, Jin-ling; Zhao, Zhi; Liu, Hong-chang; Luo, Chun-li; Huang, Ming-jin; Luo, Fu-lai; Wang, Hua-lei

2015-03-01

To study the content of mineral elements and the principal components in Gastrodia elata. Mineral elements were determined by ICP and the data was analyzed by SPSS. K element has the highest content-and the average content was 15.31 g x kg(-1). The average content of N element was 8.99 g x kg(-1), followed by K element. The coefficient of variation of K and N was small, but the Mn was the biggest with 51.39%. The highly significant positive correlation was found among N, P and K . Three principal components were selected by principal components analysis to evaluate the quality of G. elata. P, B, N, K, Cu, Mn, Fe and Mg were the characteristic elements of G. elata. The content of K and N elements was higher and relatively stable. The variation of Mn content was biggest. The quality of G. elata in Guizhou and Yunnan was better from the perspective of mineral elements.

Efficacy of the Principal Components Analysis Techniques Using ...

African Journals Online (AJOL)

Second, the paper reports results of principal components analysis after the artificial data were submitted to three commonly used procedures; scree plot, Kaiser rule, and modified Horn's parallel analysis, and demonstrate the pedagogical utility of using artificial data in teaching advanced quantitative concepts. The results ...

Principal Component Analysis as an Efficient Performance ...

African Journals Online (AJOL)

This paper uses the principal component analysis (PCA) to examine the possibility of using few explanatory variables (X's) to explain the variation in Y. It applied PCA to assess the performance of students in Abia State Polytechnic, Aba, Nigeria. This was done by estimating the coefficients of eight explanatory variables in a ...

Group-wise Principal Component Analysis for Exploratory Data Analysis

NARCIS (Netherlands)

Camacho, J.; Rodriquez-Gomez, Rafael A.; Saccenti, E.

2017-01-01

In this paper, we propose a new framework for matrix factorization based on Principal Component Analysis (PCA) where sparsity is imposed. The structure to impose sparsity is defined in terms of groups of correlated variables found in correlation matrices or maps. The framework is based on three new

Exploring functional data analysis and wavelet principal component analysis on ecstasy (MDMA wastewater data

Directory of Open Access Journals (Sweden)

Stefania Salvatore

2016-07-01

Full Text Available Abstract Background Wastewater-based epidemiology (WBE is a novel approach in drug use epidemiology which aims to monitor the extent of use of various drugs in a community. In this study, we investigate functional principal component analysis (FPCA as a tool for analysing WBE data and compare it to traditional principal component analysis (PCA and to wavelet principal component analysis (WPCA which is more flexible temporally. Methods We analysed temporal wastewater data from 42 European cities collected daily over one week in March 2013. The main temporal features of ecstasy (MDMA were extracted using FPCA using both Fourier and B-spline basis functions with three different smoothing parameters, along with PCA and WPCA with different mother wavelets and shrinkage rules. The stability of FPCA was explored through bootstrapping and analysis of sensitivity to missing data. Results The first three principal components (PCs, functional principal components (FPCs and wavelet principal components (WPCs explained 87.5-99.6 % of the temporal variation between cities, depending on the choice of basis and smoothing. The extracted temporal features from PCA, FPCA and WPCA were consistent. FPCA using Fourier basis and common-optimal smoothing was the most stable and least sensitive to missing data. Conclusion FPCA is a flexible and analytically tractable method for analysing temporal changes in wastewater data, and is robust to missing data. WPCA did not reveal any rapid temporal changes in the data not captured by FPCA. Overall the results suggest FPCA with Fourier basis functions and common-optimal smoothing parameter as the most accurate approach when analysing WBE data.

EXAFS and principal component analysis : a new shell game

International Nuclear Information System (INIS)

Wasserman, S.

1998-01-01

The use of principal component (factor) analysis in the analysis EXAFS spectra is described. The components derived from EXAFS spectra share mathematical properties with the original spectra. As a result, the abstract components can be analyzed using standard EXAFS methodology to yield the bond distances and other coordination parameters. The number of components that must be analyzed is usually less than the number of original spectra. The method is demonstrated using a series of spectra from aqueous solutions of uranyl ions

Fault Localization for Synchrophasor Data using Kernel Principal Component Analysis

Directory of Open Access Journals (Sweden)

CHEN, R.

2017-11-01

Full Text Available In this paper, based on Kernel Principal Component Analysis (KPCA of Phasor Measurement Units (PMU data, a nonlinear method is proposed for fault location in complex power systems. Resorting to the scaling factor, the derivative for a polynomial kernel is obtained. Then, the contribution of each variable to the T2 statistic is derived to determine whether a bus is the fault component. Compared to the previous Principal Component Analysis (PCA based methods, the novel version can combat the characteristic of strong nonlinearity, and provide the precise identification of fault location. Computer simulations are conducted to demonstrate the improved performance in recognizing the fault component and evaluating its propagation across the system based on the proposed method.

Principal Component Analysis: Most Favourite Tool in Chemometrics

Indian Academy of Sciences (India)

Abstract. Principal component analysis (PCA) is the most commonlyused chemometric technique. It is an unsupervised patternrecognition technique. PCA has found applications in chemistry,biology, medicine and economics. The present work attemptsto understand how PCA work and how can we interpretits results.

Principal components

NARCIS (Netherlands)

Hallin, M.; Hörmann, S.; Piegorsch, W.; El Shaarawi, A.

2012-01-01

Principal Components are probably the best known and most widely used of all multivariate analysis techniques. The essential idea consists in performing a linear transformation of the observed k-dimensional variables in such a way that the new variables are vectors of k mutually orthogonal

Quality Aware Compression of Electrocardiogram Using Principal Component Analysis.

Science.gov (United States)

Gupta, Rajarshi

2016-05-01

Electrocardiogram (ECG) compression finds wide application in various patient monitoring purposes. Quality control in ECG compression ensures reconstruction quality and its clinical acceptance for diagnostic decision making. In this paper, a quality aware compression method of single lead ECG is described using principal component analysis (PCA). After pre-processing, beat extraction and PCA decomposition, two independent quality criteria, namely, bit rate control (BRC) or error control (EC) criteria were set to select optimal principal components, eigenvectors and their quantization level to achieve desired bit rate or error measure. The selected principal components and eigenvectors were finally compressed using a modified delta and Huffman encoder. The algorithms were validated with 32 sets of MIT Arrhythmia data and 60 normal and 30 sets of diagnostic ECG data from PTB Diagnostic ECG data ptbdb, all at 1 kHz sampling. For BRC with a CR threshold of 40, an average Compression Ratio (CR), percentage root mean squared difference normalized (PRDN) and maximum absolute error (MAE) of 50.74, 16.22 and 0.243 mV respectively were obtained. For EC with an upper limit of 5 % PRDN and 0.1 mV MAE, the average CR, PRDN and MAE of 9.48, 4.13 and 0.049 mV respectively were obtained. For mitdb data 117, the reconstruction quality could be preserved up to CR of 68.96 by extending the BRC threshold. The proposed method yields better results than recently published works on quality controlled ECG compression.

Functional Principal Components Analysis of Shanghai Stock Exchange 50 Index

Directory of Open Access Journals (Sweden)

Zhiliang Wang

2014-01-01

Full Text Available The main purpose of this paper is to explore the principle components of Shanghai stock exchange 50 index by means of functional principal component analysis (FPCA. Functional data analysis (FDA deals with random variables (or process with realizations in the smooth functional space. One of the most popular FDA techniques is functional principal component analysis, which was introduced for the statistical analysis of a set of financial time series from an explorative point of view. FPCA is the functional analogue of the well-known dimension reduction technique in the multivariate statistical analysis, searching for linear transformations of the random vector with the maximal variance. In this paper, we studied the monthly return volatility of Shanghai stock exchange 50 index (SSE50. Using FPCA to reduce dimension to a finite level, we extracted the most significant components of the data and some relevant statistical features of such related datasets. The calculated results show that regarding the samples as random functions is rational. Compared with the ordinary principle component analysis, FPCA can solve the problem of different dimensions in the samples. And FPCA is a convenient approach to extract the main variance factors.

Priority of VHS Development Based in Potential Area using Principal Component Analysis

Science.gov (United States)

Meirawan, D.; Ana, A.; Saripudin, S.

2018-02-01

The current condition of VHS is still inadequate in quality, quantity and relevance. The purpose of this research is to analyse the development of VHS based on the development of regional potential by using principal component analysis (PCA) in Bandung, Indonesia. This study used descriptive qualitative data analysis using the principle of secondary data reduction component. The method used is Principal Component Analysis (PCA) analysis with Minitab Statistics Software tool. The results of this study indicate the value of the lowest requirement is a priority of the construction of development VHS with a program of majors in accordance with the development of regional potential. Based on the PCA score found that the main priority in the development of VHS in Bandung is in Saguling, which has the lowest PCA value of 416.92 in area 1, Cihampelas with the lowest PCA value in region 2 and Padalarang with the lowest PCA value.

Determining the number of components in principal components analysis: A comparison of statistical, crossvalidation and approximated methods

NARCIS (Netherlands)

Saccenti, E.; Camacho, J.

2015-01-01

Principal component analysis is one of the most commonly used multivariate tools to describe and summarize data. Determining the optimal number of components in a principal component model is a fundamental problem in many fields of application. In this paper we compare the performance of several

Fast principal component analysis for stacking seismic data

Science.gov (United States)

Wu, Juan; Bai, Min

2018-04-01

Stacking seismic data plays an indispensable role in many steps of the seismic data processing and imaging workflow. Optimal stacking of seismic data can help mitigate seismic noise and enhance the principal components to a great extent. Traditional average-based seismic stacking methods cannot obtain optimal performance when the ambient noise is extremely strong. We propose a principal component analysis (PCA) algorithm for stacking seismic data without being sensitive to noise level. Considering the computational bottleneck of the classic PCA algorithm in processing massive seismic data, we propose an efficient PCA algorithm to make the proposed method readily applicable for industrial applications. Two numerically designed examples and one real seismic data are used to demonstrate the performance of the presented method.

Principal component analysis for neural electron/jet discrimination in highly segmented calorimeters

International Nuclear Information System (INIS)

Vassali, M.R.; Seixas, J.M.

2001-01-01

A neural electron/jet discriminator based on calorimetry is developed for the second-level trigger system of the ATLAS detector. As preprocessing of the calorimeter information, a principal component analysis is performed on each segment of the two sections (electromagnetic and hadronic) of the calorimeter system, in order to reduce significantly the dimension of the input data space and fully explore the detailed energy deposition profile, which is provided by the highly-segmented calorimeter system. It is shown that projecting calorimeter data onto 33 segmented principal components, the discrimination efficiency of the neural classifier reaches 98.9% for electrons (with only 1% of false alarm probability). Furthermore, restricting data projection onto only 9 components, an electron efficiency of 99.1% is achieved (with 3% of false alarm), which confirms that a fast triggering system may be designed using few components

Scalable Robust Principal Component Analysis Using Grassmann Averages

DEFF Research Database (Denmark)

Hauberg, Søren; Feragen, Aasa; Enficiaud, Raffi

2016-01-01

In large datasets, manual data verification is impossible, and we must expect the number of outliers to increase with data size. While principal component analysis (PCA) can reduce data size, and scalable solutions exist, it is well-known that outliers can arbitrarily corrupt the results. Unfortu...

A Genealogical Interpretation of Principal Components Analysis

Science.gov (United States)

McVean, Gil

2009-01-01

Principal components analysis, PCA, is a statistical method commonly used in population genetics to identify structure in the distribution of genetic variation across geographical location and ethnic background. However, while the method is often used to inform about historical demographic processes, little is known about the relationship between fundamental demographic parameters and the projection of samples onto the primary axes. Here I show that for SNP data the projection of samples onto the principal components can be obtained directly from considering the average coalescent times between pairs of haploid genomes. The result provides a framework for interpreting PCA projections in terms of underlying processes, including migration, geographical isolation, and admixture. I also demonstrate a link between PCA and Wright's fst and show that SNP ascertainment has a largely simple and predictable effect on the projection of samples. Using examples from human genetics, I discuss the application of these results to empirical data and the implications for inference. PMID:19834557

Principal Component Analysis - A Powerful Tool in Computing Marketing Information

Directory of Open Access Journals (Sweden)

Constantin C.

2014-12-01

Full Text Available This paper is about an instrumental research regarding a powerful multivariate data analysis method which can be used by the researchers in order to obtain valuable information for decision makers that need to solve the marketing problem a company face with. The literature stresses the need to avoid the multicollinearity phenomenon in multivariate analysis and the features of Principal Component Analysis (PCA in reducing the number of variables that could be correlated with each other to a small number of principal components that are uncorrelated. In this respect, the paper presents step-by-step the process of applying the PCA in marketing research when we use a large number of variables that naturally are collinear.

Multistage principal component analysis based method for abdominal ECG decomposition

International Nuclear Information System (INIS)

Petrolis, Robertas; Krisciukaitis, Algimantas; Gintautas, Vladas

2015-01-01

Reflection of fetal heart electrical activity is present in registered abdominal ECG signals. However this signal component has noticeably less energy than concurrent signals, especially maternal ECG. Therefore traditionally recommended independent component analysis, fails to separate these two ECG signals. Multistage principal component analysis (PCA) is proposed for step-by-step extraction of abdominal ECG signal components. Truncated representation and subsequent subtraction of cardio cycles of maternal ECG are the first steps. The energy of fetal ECG component then becomes comparable or even exceeds energy of other components in the remaining signal. Second stage PCA concentrates energy of the sought signal in one principal component assuring its maximal amplitude regardless to the orientation of the fetus in multilead recordings. Third stage PCA is performed on signal excerpts representing detected fetal heart beats in aim to perform their truncated representation reconstructing their shape for further analysis. The algorithm was tested with PhysioNet Challenge 2013 signals and signals recorded in the Department of Obstetrics and Gynecology, Lithuanian University of Health Sciences. Results of our method in PhysioNet Challenge 2013 on open data set were: average score: 341.503 bpm 2 and 32.81 ms. (paper)

Principal Component Clustering Approach to Teaching Quality Discriminant Analysis

Science.gov (United States)

Xian, Sidong; Xia, Haibo; Yin, Yubo; Zhai, Zhansheng; Shang, Yan

2016-01-01

Teaching quality is the lifeline of the higher education. Many universities have made some effective achievement about evaluating the teaching quality. In this paper, we establish the Students' evaluation of teaching (SET) discriminant analysis model and algorithm based on principal component clustering analysis. Additionally, we classify the SET…

Analysis of Moisture Content in Beetroot using Fourier Transform Infrared Spectroscopy and by Principal Component Analysis.

Science.gov (United States)

Nesakumar, Noel; Baskar, Chanthini; Kesavan, Srinivasan; Rayappan, John Bosco Balaguru; Alwarappan, Subbiah

2018-05-22

The moisture content of beetroot varies during long-term cold storage. In this work, we propose a strategy to identify the moisture content and age of beetroot using principal component analysis coupled Fourier transform infrared spectroscopy (FTIR). Frequent FTIR measurements were recorded directly from the beetroot sample surface over a period of 34 days for analysing its moisture content employing attenuated total reflectance in the spectral ranges of 2614-4000 and 1465-1853 cm -1 with a spectral resolution of 8 cm -1 . In order to estimate the transmittance peak height (T p ) and area under the transmittance curve [Formula: see text] over the spectral ranges of 2614-4000 and 1465-1853 cm -1 , Gaussian curve fitting algorithm was performed on FTIR data. Principal component and nonlinear regression analyses were utilized for FTIR data analysis. Score plot over the ranges of 2614-4000 and 1465-1853 cm -1 allowed beetroot quality discrimination. Beetroot quality predictive models were developed by employing biphasic dose response function. Validation experiment results confirmed that the accuracy of the beetroot quality predictive model reached 97.5%. This research work proves that FTIR spectroscopy in combination with principal component analysis and beetroot quality predictive models could serve as an effective tool for discriminating moisture content in fresh, half and completely spoiled stages of beetroot samples and for providing status alerts.

Aeromagnetic Compensation Algorithm Based on Principal Component Analysis

Directory of Open Access Journals (Sweden)

Peilin Wu

2018-01-01

Full Text Available Aeromagnetic exploration is an important exploration method in geophysics. The data is typically measured by optically pumped magnetometer mounted on an aircraft. But any aircraft produces significant levels of magnetic interference. Therefore, aeromagnetic compensation is important in aeromagnetic exploration. However, multicollinearity of the aeromagnetic compensation model degrades the performance of the compensation. To address this issue, a novel aeromagnetic compensation method based on principal component analysis is proposed. Using the algorithm, the correlation in the feature matrix is eliminated and the principal components are using to construct the hyperplane to compensate the platform-generated magnetic fields. The algorithm was tested using a helicopter, and the obtained improvement ratio is 9.86. The compensated quality is almost the same or slightly better than the ridge regression. The validity of the proposed method was experimentally demonstrated.

Analysis and Classification of Acoustic Emission Signals During Wood Drying Using the Principal Component Analysis

Energy Technology Data Exchange (ETDEWEB)

Kang, Ho Yang [Korea Research Institute of Standards and Science, Daejeon (Korea, Republic of); Kim, Ki Bok [Chungnam National University, Daejeon (Korea, Republic of)

2003-06-15

In this study, acoustic emission (AE) signals due to surface cracking and moisture movement in the flat-sawn boards of oak (Quercus Variablilis) during drying under the ambient conditions were analyzed and classified using the principal component analysis. The AE signals corresponding to surface cracking showed higher in peak amplitude and peak frequency, and shorter in rise time than those corresponding to moisture movement. To reduce the multicollinearity among AE features and to extract the significant AE parameters, correlation analysis was performed. Over 99% of the variance of AE parameters could be accounted for by the first to the fourth principal components. The classification feasibility and success rate were investigated in terms of two statistical classifiers having six independent variables (AE parameters) and six principal components. As a result, the statistical classifier having AE parameters showed the success rate of 70.0%. The statistical classifier having principal components showed the success rate of 87.5% which was considerably than that of the statistical classifier having AE parameters

Analysis and Classification of Acoustic Emission Signals During Wood Drying Using the Principal Component Analysis

International Nuclear Information System (INIS)

Kang, Ho Yang; Kim, Ki Bok

2003-01-01

In this study, acoustic emission (AE) signals due to surface cracking and moisture movement in the flat-sawn boards of oak (Quercus Variablilis) during drying under the ambient conditions were analyzed and classified using the principal component analysis. The AE signals corresponding to surface cracking showed higher in peak amplitude and peak frequency, and shorter in rise time than those corresponding to moisture movement. To reduce the multicollinearity among AE features and to extract the significant AE parameters, correlation analysis was performed. Over 99% of the variance of AE parameters could be accounted for by the first to the fourth principal components. The classification feasibility and success rate were investigated in terms of two statistical classifiers having six independent variables (AE parameters) and six principal components. As a result, the statistical classifier having AE parameters showed the success rate of 70.0%. The statistical classifier having principal components showed the success rate of 87.5% which was considerably than that of the statistical classifier having AE parameters

Nonparametric inference in nonlinear principal components analysis : exploration and beyond

NARCIS (Netherlands)

Linting, Mariëlle

2007-01-01

In the social and behavioral sciences, data sets often do not meet the assumptions of traditional analysis methods. Therefore, nonlinear alternatives to traditional methods have been developed. This thesis starts with a didactic discussion of nonlinear principal components analysis (NLPCA),

Vibrational spectroscopy and principal component analysis for conformational study of virus nucleic acids

Science.gov (United States)

Dovbeshko, G. I.; Repnytska, O. P.; Pererva, T.; Miruta, A.; Kosenkov, D.

2004-07-01

Conformation analysis of mutated DNA-bacteriophages (PLys-23, P23-2, P47- the numbers have been assigned by T. Pererva) induced by MS2 virus incorporated in Ecoli AB 259 Hfr 3000 has been done. Surface enhanced infrared absorption (SEIRA) spectroscopy and principal component analysis has been applied for solving this problem. The nucleic acids isolated from the mutated phages had a form of double stranded DNA with different modifications. The nucleic acid from phage P47 was undergone the structural rearrangement in the most degree. The shape and position ofthe fine structure of the Phosphate asymmetrical band at 1071cm-1 as well as the stretching OH vibration at 3370-3390 cm-1 has indicated to the appearance ofadditional OH-groups. The Z-form feature has been found in the base vibration region (1694 cm-1) and the sugar region (932 cm-1). A supposition about modification of structure of DNA by Z-fragments for P47 phage has been proposed. The P23-2 and PLys-23 phages have showed the numerous minor structural changes also. On the basis of SEIRA spectra we have determined the characteristic parameters of the marker bands of nucleic acid used for construction of principal components. Contribution of different spectral parameters of nucleic acids to principal components has been estimated.

A Note on McDonald's Generalization of Principal Components Analysis

Science.gov (United States)

Shine, Lester C., II

1972-01-01

It is shown that McDonald's generalization of Classical Principal Components Analysis to groups of variables maximally channels the totalvariance of the original variables through the groups of variables acting as groups. An equation is obtained for determining the vectors of correlations of the L2 components with the original variables.…

Iris recognition based on robust principal component analysis

Science.gov (United States)

Karn, Pradeep; He, Xiao Hai; Yang, Shuai; Wu, Xiao Hong

2014-11-01

Iris images acquired under different conditions often suffer from blur, occlusion due to eyelids and eyelashes, specular reflection, and other artifacts. Existing iris recognition systems do not perform well on these types of images. To overcome these problems, we propose an iris recognition method based on robust principal component analysis. The proposed method decomposes all training images into a low-rank matrix and a sparse error matrix, where the low-rank matrix is used for feature extraction. The sparsity concentration index approach is then applied to validate the recognition result. Experimental results using CASIA V4 and IIT Delhi V1iris image databases showed that the proposed method achieved competitive performances in both recognition accuracy and computational efficiency.

Quality analysis of commercial samples of Ziziphi spinosae semen (suanzaoren by means of chromatographic fingerprinting assisted by principal component analysis

Directory of Open Access Journals (Sweden)

Shuai Sun

2014-06-01

Full Text Available Due to the scarcity of resources of Ziziphi spinosae semen (ZSS, many inferior goods and even adulterants are generally found in medicine markets. To strengthen the quality control, HPLC fingerprint common pattern established in this paper showed three main bioactive compounds in one chromatogram simultaneously. Principal component analysis based on DAD signals could discriminate adulterants and inferiorities. Principal component analysis indicated that all samples could be mainly regrouped into two main clusters according to the first principal component (PC1, redefined as Vicenin II and the second principal component (PC2, redefined as zizyphusine. PC1 and PC2 could explain 91.42% of the variance. Content of zizyphusine fluctuated more greatly than that of spinosin, and this result was also confirmed by the HPTLC result. Samples with low content of jujubosides and two common adulterants could not be used equivalently with authenticated ones in clinic, while one reference standard extract could substitute the crude drug in pharmaceutical production. Giving special consideration to the well-known bioactive saponins but with low response by end absorption, a fast and cheap HPTLC method for quality control of ZSS was developed and the result obtained was commensurate well with that of HPLC analysis. Samples having similar fingerprints to HPTLC common pattern targeting at saponins could be regarded as authenticated ones. This work provided a faster and cheaper way for quality control of ZSS and laid foundation for establishing a more effective quality control method for ZSS. Keywords: Adulterant, Common pattern, Principal component analysis, Quality control, Ziziphi spinosae semen

Sparse principal component analysis in medical shape modeling

Science.gov (United States)

Sjöstrand, Karl; Stegmann, Mikkel B.; Larsen, Rasmus

2006-03-01

Principal component analysis (PCA) is a widely used tool in medical image analysis for data reduction, model building, and data understanding and exploration. While PCA is a holistic approach where each new variable is a linear combination of all original variables, sparse PCA (SPCA) aims at producing easily interpreted models through sparse loadings, i.e. each new variable is a linear combination of a subset of the original variables. One of the aims of using SPCA is the possible separation of the results into isolated and easily identifiable effects. This article introduces SPCA for shape analysis in medicine. Results for three different data sets are given in relation to standard PCA and sparse PCA by simple thresholding of small loadings. Focus is on a recent algorithm for computing sparse principal components, but a review of other approaches is supplied as well. The SPCA algorithm has been implemented using Matlab and is available for download. The general behavior of the algorithm is investigated, and strengths and weaknesses are discussed. The original report on the SPCA algorithm argues that the ordering of modes is not an issue. We disagree on this point and propose several approaches to establish sensible orderings. A method that orders modes by decreasing variance and maximizes the sum of variances for all modes is presented and investigated in detail.

Principal Component Analysis of Working Memory Variables during Child and Adolescent Development.

Science.gov (United States)

Barriga-Paulino, Catarina I; Rodríguez-Martínez, Elena I; Rojas-Benjumea, María Ángeles; Gómez, Carlos M

2016-10-03

Correlation and Principal Component Analysis (PCA) of behavioral measures from two experimental tasks (Delayed Match-to-Sample and Oddball), and standard scores from a neuropsychological test battery (Working Memory Test Battery for Children) was performed on data from participants between 6-18 years old. The correlation analysis (p 1), the scores of the first extracted component were significantly correlated (p < .05) to most behavioral measures, suggesting some commonalities of the processes of age-related changes in the measured variables. The results suggest that this first component would be related to age but also to individual differences during the cognitive maturation process across childhood and adolescence stages. The fourth component would represent the speed-accuracy trade-off phenomenon as it presents loading components with different signs for reaction times and errors.

A Cure for Variance Inflation in High Dimensional Kernel Principal Component Analysis

DEFF Research Database (Denmark)

Abrahamsen, Trine Julie; Hansen, Lars Kai

2011-01-01

Small sample high-dimensional principal component analysis (PCA) suffers from variance inflation and lack of generalizability. It has earlier been pointed out that a simple leave-one-out variance renormalization scheme can cure the problem. In this paper we generalize the cure in two directions......: First, we propose a computationally less intensive approximate leave-one-out estimator, secondly, we show that variance inflation is also present in kernel principal component analysis (kPCA) and we provide a non-parametric renormalization scheme which can quite efficiently restore generalizability in kPCA....... As for PCA our analysis also suggests a simplified approximate expression. © 2011 Trine J. Abrahamsen and Lars K. Hansen....

The analysis of multivariate group differences using common principal components

NARCIS (Netherlands)

Bechger, T.M.; Blanca, M.J.; Maris, G.

2014-01-01

Although it is simple to determine whether multivariate group differences are statistically significant or not, such differences are often difficult to interpret. This article is about common principal components analysis as a tool for the exploratory investigation of multivariate group differences

Predicting Insolvency : A comparison between discriminant analysis and logistic regression using principal components

OpenAIRE

Geroukis, Asterios; Brorson, Erik

2014-01-01

In this study, we compare the two statistical techniques logistic regression and discriminant analysis to see how well they classify companies based on clusters – made from the solvency ratio ­– using principal components as independent variables. The principal components are made with different financial ratios. We use cluster analysis to find groups with low, medium and high solvency ratio of 1200 different companies found on the NASDAQ stock market and use this as an apriori definition of ...

APPLICATION OF PRINCIPAL COMPONENT ANALYSIS TO RELAXOGRAPHIC IMAGES

International Nuclear Information System (INIS)

STOYANOVA, R.S.; OCHS, M.F.; BROWN, T.R.; ROONEY, W.D.; LI, X.; LEE, J.H.; SPRINGER, C.S.

1999-01-01

Standard analysis methods for processing inversion recovery MR images traditionally have used single pixel techniques. In these techniques each pixel is independently fit to an exponential recovery, and spatial correlations in the data set are ignored. By analyzing the image as a complete dataset, improved error analysis and automatic segmentation can be achieved. Here, the authors apply principal component analysis (PCA) to a series of relaxographic images. This procedure decomposes the 3-dimensional data set into three separate images and corresponding recovery times. They attribute the 3 images to be spatial representations of gray matter (GM), white matter (WM) and cerebrospinal fluid (CSF) content

Radar fall detection using principal component analysis

Science.gov (United States)

Jokanovic, Branka; Amin, Moeness; Ahmad, Fauzia; Boashash, Boualem

2016-05-01

Falls are a major cause of fatal and nonfatal injuries in people aged 65 years and older. Radar has the potential to become one of the leading technologies for fall detection, thereby enabling the elderly to live independently. Existing techniques for fall detection using radar are based on manual feature extraction and require significant parameter tuning in order to provide successful detections. In this paper, we employ principal component analysis for fall detection, wherein eigen images of observed motions are employed for classification. Using real data, we demonstrate that the PCA based technique provides performance improvement over the conventional feature extraction methods.

Principal component analysis of image gradient orientations for face recognition

NARCIS (Netherlands)

Tzimiropoulos, Georgios; Zafeiriou, Stefanos; Pantic, Maja

We introduce the notion of Principal Component Analysis (PCA) of image gradient orientations. As image data is typically noisy, but noise is substantially different from Gaussian, traditional PCA of pixel intensities very often fails to estimate reliably the low-dimensional subspace of a given data

On the structure of dynamic principal component analysis used in statistical process monitoring

DEFF Research Database (Denmark)

Vanhatalo, Erik; Kulahci, Murat; Bergquist, Bjarne

2017-01-01

When principal component analysis (PCA) is used for statistical process monitoring it relies on the assumption that data are time independent. However, industrial data will often exhibit serial correlation. Dynamic PCA (DPCA) has been suggested as a remedy for high-dimensional and time...... for determining the number of principal components to retain. The number of retained principal components is determined by visual inspection of the serial correlation in the squared prediction error statistic, Q (SPE), together with the cumulative explained variance of the model. The methods are illustrated using...... driven method to determine the maximum number of lags in DPCA with a foundation in multivariate time series analysis. The method is based on the behavior of the eigenvalues of the lagged autocorrelation and partial autocorrelation matrices. Given a specific lag structure we also propose a method...

Assessment of genetic divergence in tomato through agglomerative hierarchical clustering and principal component analysis

International Nuclear Information System (INIS)

Iqbal, Q.; Saleem, M.Y.; Hameed, A.; Asghar, M.

2014-01-01

For the improvement of qualitative and quantitative traits, existence of variability has prime importance in plant breeding. Data on different morphological and reproductive traits of 47 tomato genotypes were analyzed for correlation,agglomerative hierarchical clustering and principal component analysis (PCA) to select genotypes and traits for future breeding program. Correlation analysis revealed significant positive association between yield and yield components like fruit diameter, single fruit weight and number of fruits plant-1. Principal component (PC) analysis depicted first three PCs with Eigen-value higher than 1 contributing 81.72% of total variability for different traits. The PC-I showed positive factor loadings for all the traits except number of fruits plant-1. The contribution of single fruit weight and fruit diameter was highest in PC-1. Cluster analysis grouped all genotypes into five divergent clusters. The genotypes in cluster-II and cluster-V exhibited uniform maturity and higher yield. The D2 statistics confirmed highest distance between cluster- III and cluster-V while maximum similarity was observed in cluster-II and cluster-III. It is therefore suggested that crosses between genotypes of cluster-II and cluster-V with those of cluster-I and cluster-III may exhibit heterosis in F1 for hybrid breeding and for selection of superior genotypes in succeeding generations for cross breeding programme. (author)

Dynamic of consumer groups and response of commodity markets by principal component analysis

Science.gov (United States)

Nobi, Ashadun; Alam, Shafiqul; Lee, Jae Woo

2017-09-01

This study investigates financial states and group dynamics by applying principal component analysis to the cross-correlation coefficients of the daily returns of commodity futures. The eigenvalues of the cross-correlation matrix in the 6-month timeframe displays similar values during 2010-2011, but decline following 2012. A sharp drop in eigenvalue implies the significant change of the market state. Three commodity sectors, energy, metals and agriculture, are projected into two dimensional spaces consisting of two principal components (PC). We observe that they form three distinct clusters in relation to various sectors. However, commodities with distinct features have intermingled with one another and scattered during severe crises, such as the European sovereign debt crises. We observe the notable change of the position of two dimensional spaces of groups during financial crises. By considering the first principal component (PC1) within the 6-month moving timeframe, we observe that commodities of the same group change states in a similar pattern, and the change of states of one group can be used as a warning for other group.

Principal Component Analysis of Some Quantitative and Qualitative Traits in Iranian Spinach Landraces

Directory of Open Access Journals (Sweden)

Mohebodini Mehdi

2017-08-01

Full Text Available Landraces of spinach in Iran have not been sufficiently characterised for their morpho-agronomic traits. Such characterisation would be helpful in the development of new genetically improved cultivars. In this study 54 spinach accessions collected from the major spinach growing areas of Iran were evaluated to determine their phenotypic diversity profile of spinach genotypes on the basis of 10 quantitative and 9 qualitative morpho-agronomic traits. High coefficients of variation were recorded in some quantitative traits (dry yield and leaf area and all of the qualitative traits. Using principal component analysis, the first four principal components with eigen-values more than 1 contributed 87% of the variability among accessions for quantitative traits, whereas the first four principal components with eigen-values more than 0.8 contributed 79% of the variability among accessions for qualitative traits. The most important relations observed on the first two principal components were a strong positive association between leaf width and petiole length; between leaf length and leaf numbers in flowering; and among fresh yield, dry yield and petiole diameter; a near zero correlation between days to flowering with leaf width and petiole length. Prickly seeds, high percentage of female plants, smooth leaf texture, high numbers of leaves at flowering, greygreen leaves, erect petiole attitude and long petiole length are important characters for spinach breeding programmes.

Principal component analysis of tomato genotypes based on some morphological and biochemical quality indicators

Directory of Open Access Journals (Sweden)

Glogovac Svetlana

2012-01-01

Full Text Available This study investigates variability of tomato genotypes based on morphological and biochemical fruit traits. Experimental material is a part of tomato genetic collection from Institute of Filed and Vegetable Crops in Novi Sad, Serbia. Genotypes were analyzed for fruit mass, locule number, index of fruit shape, fruit colour, dry matter content, total sugars, total acidity, lycopene and vitamin C. Minimum, maximum and average values and main indicators of variability (CV and σ were calculated. Principal component analysis was performed to determinate variability source structure. Four principal components, which contribute 93.75% of the total variability, were selected for analysis. The first principal component is defined by vitamin C, locule number and index of fruit shape. The second component is determined by dry matter content, and total acidity, the third by lycopene, fruit mass and fruit colour. Total sugars had the greatest part in the fourth component.

Obesity, metabolic syndrome, impaired fasting glucose, and microvascular dysfunction: a principal component analysis approach.

Science.gov (United States)

Panazzolo, Diogo G; Sicuro, Fernando L; Clapauch, Ruth; Maranhão, Priscila A; Bouskela, Eliete; Kraemer-Aguiar, Luiz G

2012-11-13

We aimed to evaluate the multivariate association between functional microvascular variables and clinical-laboratorial-anthropometrical measurements. Data from 189 female subjects (34.0 ± 15.5 years, 30.5 ± 7.1 kg/m2), who were non-smokers, non-regular drug users, without a history of diabetes and/or hypertension, were analyzed by principal component analysis (PCA). PCA is a classical multivariate exploratory tool because it highlights common variation between variables allowing inferences about possible biological meaning of associations between them, without pre-establishing cause-effect relationships. In total, 15 variables were used for PCA: body mass index (BMI), waist circumference, systolic and diastolic blood pressure (BP), fasting plasma glucose, levels of total cholesterol, high-density lipoprotein cholesterol (HDL-c), low-density lipoprotein cholesterol (LDL-c), triglycerides (TG), insulin, C-reactive protein (CRP), and functional microvascular variables measured by nailfold videocapillaroscopy. Nailfold videocapillaroscopy was used for direct visualization of nutritive capillaries, assessing functional capillary density, red blood cell velocity (RBCV) at rest and peak after 1 min of arterial occlusion (RBCV(max)), and the time taken to reach RBCV(max) (TRBCV(max)). A total of 35% of subjects had metabolic syndrome, 77% were overweight/obese, and 9.5% had impaired fasting glucose. PCA was able to recognize that functional microvascular variables and clinical-laboratorial-anthropometrical measurements had a similar variation. The first five principal components explained most of the intrinsic variation of the data. For example, principal component 1 was associated with BMI, waist circumference, systolic BP, diastolic BP, insulin, TG, CRP, and TRBCV(max) varying in the same way. Principal component 1 also showed a strong association among HDL-c, RBCV, and RBCV(max), but in the opposite way. Principal component 3 was associated only with microvascular

Obesity, metabolic syndrome, impaired fasting glucose, and microvascular dysfunction: a principal component analysis approach

Directory of Open Access Journals (Sweden)

Panazzolo Diogo G

2012-11-01

Full Text Available Abstract Background We aimed to evaluate the multivariate association between functional microvascular variables and clinical-laboratorial-anthropometrical measurements. Methods Data from 189 female subjects (34.0±15.5 years, 30.5±7.1 kg/m2, who were non-smokers, non-regular drug users, without a history of diabetes and/or hypertension, were analyzed by principal component analysis (PCA. PCA is a classical multivariate exploratory tool because it highlights common variation between variables allowing inferences about possible biological meaning of associations between them, without pre-establishing cause-effect relationships. In total, 15 variables were used for PCA: body mass index (BMI, waist circumference, systolic and diastolic blood pressure (BP, fasting plasma glucose, levels of total cholesterol, high-density lipoprotein cholesterol (HDL-c, low-density lipoprotein cholesterol (LDL-c, triglycerides (TG, insulin, C-reactive protein (CRP, and functional microvascular variables measured by nailfold videocapillaroscopy. Nailfold videocapillaroscopy was used for direct visualization of nutritive capillaries, assessing functional capillary density, red blood cell velocity (RBCV at rest and peak after 1 min of arterial occlusion (RBCVmax, and the time taken to reach RBCVmax (TRBCVmax. Results A total of 35% of subjects had metabolic syndrome, 77% were overweight/obese, and 9.5% had impaired fasting glucose. PCA was able to recognize that functional microvascular variables and clinical-laboratorial-anthropometrical measurements had a similar variation. The first five principal components explained most of the intrinsic variation of the data. For example, principal component 1 was associated with BMI, waist circumference, systolic BP, diastolic BP, insulin, TG, CRP, and TRBCVmax varying in the same way. Principal component 1 also showed a strong association among HDL-c, RBCV, and RBCVmax, but in the opposite way. Principal component 3 was

Revealing the equivalence of two clonal survival models by principal component analysis

International Nuclear Information System (INIS)

Lachet, Bernard; Dufour, Jacques

1976-01-01

The principal component analysis of 21 chlorella cell survival curves, adjusted by one-hit and two-hit target models, lead to quite similar projections on the principal plan: the homologous parameters of these models are linearly correlated; the reason for the statistical equivalence of these two models, in the present state of experimental inaccuracy, is revealed [fr

Principal component analysis for verifying 1H NMR spectral assignments. The case of 3-aryl (1,2,4)-oxadiazole-5-carbohydrazide benzylidene

International Nuclear Information System (INIS)

Silva, Joao Bosco P. da; Malvestiti, Ivani; Hallwass, Fernando; Ramos, Mozart N.; Leite, Lucia F.C. da Costa; Barreiro, Eliezer J.

2005-01-01

The 1 H NMR data set of a series of 3-aryl (1,2,4)-oxadiazole-5-carbohydrazide benzylidene derivatives synthesized in our group was analyzed using the chemometric technique of principal component analysis (PCA). Using the original 1H NMR data PCA allowed identifying some misassignments of the proton aromatic chemical shifts. As a consequence of this multivariate analysis, nuclear Overhauser difference experiments were performed to investigate the ambiguity of other assignments of the ortho and meta aromatic hydrogens for the compound with the bromine substituent. The effect of the 1,2,4-oxadiazole group as an electron acceptor, mainly for the hydrogens 12,13, has been highlighted. (author)

Selective principal component regression analysis of fluorescence hyperspectral image to assess aflatoxin contamination in corn

Science.gov (United States)

Selective principal component regression analysis (SPCR) uses a subset of the original image bands for principal component transformation and regression. For optimal band selection before the transformation, this paper used genetic algorithms (GA). In this case, the GA process used the regression co...

Fault Diagnosis Method Based on Information Entropy and Relative Principal Component Analysis

Directory of Open Access Journals (Sweden)

Xiaoming Xu

2017-01-01

Full Text Available In traditional principle component analysis (PCA, because of the neglect of the dimensions influence between different variables in the system, the selected principal components (PCs often fail to be representative. While the relative transformation PCA is able to solve the above problem, it is not easy to calculate the weight for each characteristic variable. In order to solve it, this paper proposes a kind of fault diagnosis method based on information entropy and Relative Principle Component Analysis. Firstly, the algorithm calculates the information entropy for each characteristic variable in the original dataset based on the information gain algorithm. Secondly, it standardizes every variable’s dimension in the dataset. And, then, according to the information entropy, it allocates the weight for each standardized characteristic variable. Finally, it utilizes the relative-principal-components model established for fault diagnosis. Furthermore, the simulation experiments based on Tennessee Eastman process and Wine datasets demonstrate the feasibility and effectiveness of the new method.

Airborne electromagnetic data levelling using principal component analysis based on flight line difference

Science.gov (United States)

Zhang, Qiong; Peng, Cong; Lu, Yiming; Wang, Hao; Zhu, Kaiguang

2018-04-01

A novel technique is developed to level airborne geophysical data using principal component analysis based on flight line difference. In the paper, flight line difference is introduced to enhance the features of levelling error for airborne electromagnetic (AEM) data and improve the correlation between pseudo tie lines. Thus we conduct levelling to the flight line difference data instead of to the original AEM data directly. Pseudo tie lines are selected distributively cross profile direction, avoiding the anomalous regions. Since the levelling errors of selective pseudo tie lines show high correlations, principal component analysis is applied to extract the local levelling errors by low-order principal components reconstruction. Furthermore, we can obtain the levelling errors of original AEM data through inverse difference after spatial interpolation. This levelling method does not need to fly tie lines and design the levelling fitting function. The effectiveness of this method is demonstrated by the levelling results of survey data, comparing with the results from tie-line levelling and flight-line correlation levelling.

Process parameter optimization based on principal components analysis during machining of hardened steel

Directory of Open Access Journals (Sweden)

Suryakant B. Chandgude

2015-09-01

Full Text Available The optimum selection of process parameters has played an important role for improving the surface finish, minimizing tool wear, increasing material removal rate and reducing machining time of any machining process. In this paper, optimum parameters while machining AISI D2 hardened steel using solid carbide TiAlN coated end mill has been investigated. For optimization of process parameters along with multiple quality characteristics, principal components analysis method has been adopted in this work. The confirmation experiments have revealed that to improve performance of cutting; principal components analysis method would be a useful tool.

Source Signals Separation and Reconstruction Following Principal Component Analysis

Directory of Open Access Journals (Sweden)

WANG Cheng

2014-02-01

Full Text Available For separation and reconstruction of source signals from observed signals problem, the physical significance of blind source separation modal and independent component analysis is not very clear, and its solution is not unique. Aiming at these disadvantages, a new linear and instantaneous mixing model and a novel source signals separation reconstruction solving method from observed signals based on principal component analysis (PCA are put forward. Assumption of this new model is statistically unrelated rather than independent of source signals, which is different from the traditional blind source separation model. A one-to-one relationship between linear and instantaneous mixing matrix of new model and linear compound matrix of PCA, and a one-to-one relationship between unrelated source signals and principal components are demonstrated using the concept of linear separation matrix and unrelated of source signals. Based on this theoretical link, source signals separation and reconstruction problem is changed into PCA of observed signals then. The theoretical derivation and numerical simulation results show that, in despite of Gauss measurement noise, wave form and amplitude information of unrelated source signal can be separated and reconstructed by PCA when linear mixing matrix is column orthogonal and normalized; only wave form information of unrelated source signal can be separated and reconstructed by PCA when linear mixing matrix is column orthogonal but not normalized, unrelated source signal cannot be separated and reconstructed by PCA when mixing matrix is not column orthogonal or linear.

An Introductory Application of Principal Components to Cricket Data

Science.gov (United States)

Manage, Ananda B. W.; Scariano, Stephen M.

2013-01-01

Principal Component Analysis is widely used in applied multivariate data analysis, and this article shows how to motivate student interest in this topic using cricket sports data. Here, principal component analysis is successfully used to rank the cricket batsmen and bowlers who played in the 2012 Indian Premier League (IPL) competition. In…

Integrating Data Transformation in Principal Components Analysis

KAUST Repository

Maadooliat, Mehdi

2015-01-02

Principal component analysis (PCA) is a popular dimension reduction method to reduce the complexity and obtain the informative aspects of high-dimensional datasets. When the data distribution is skewed, data transformation is commonly used prior to applying PCA. Such transformation is usually obtained from previous studies, prior knowledge, or trial-and-error. In this work, we develop a model-based method that integrates data transformation in PCA and finds an appropriate data transformation using the maximum profile likelihood. Extensions of the method to handle functional data and missing values are also developed. Several numerical algorithms are provided for efficient computation. The proposed method is illustrated using simulated and real-world data examples.

Principal Components as a Data Reduction and Noise Reduction Technique

Science.gov (United States)

Imhoff, M. L.; Campbell, W. J.

1982-01-01

The potential of principal components as a pipeline data reduction technique for thematic mapper data was assessed and principal components analysis and its transformation as a noise reduction technique was examined. Two primary factors were considered: (1) how might data reduction and noise reduction using the principal components transformation affect the extraction of accurate spectral classifications; and (2) what are the real savings in terms of computer processing and storage costs of using reduced data over the full 7-band TM complement. An area in central Pennsylvania was chosen for a study area. The image data for the project were collected using the Earth Resources Laboratory's thematic mapper simulator (TMS) instrument.

Understanding deformation mechanisms during powder compaction using principal component analysis of compression data.

Science.gov (United States)

Roopwani, Rahul; Buckner, Ira S

2011-10-14

Principal component analysis (PCA) was applied to pharmaceutical powder compaction. A solid fraction parameter (SF(c/d)) and a mechanical work parameter (W(c/d)) representing irreversible compression behavior were determined as functions of applied load. Multivariate analysis of the compression data was carried out using PCA. The first principal component (PC1) showed loadings for the solid fraction and work values that agreed with changes in the relative significance of plastic deformation to consolidation at different pressures. The PC1 scores showed the same rank order as the relative plasticity ranking derived from the literature for common pharmaceutical materials. The utility of PC1 in understanding deformation was extended to binary mixtures using a subset of the original materials. Combinations of brittle and plastic materials were characterized using the PCA method. The relationships between PC1 scores and the weight fractions of the mixtures were typically linear showing ideal mixing in their deformation behaviors. The mixture consisting of two plastic materials was the only combination to show a consistent positive deviation from ideality. The application of PCA to solid fraction and mechanical work data appears to be an effective means of predicting deformation behavior during compaction of simple powder mixtures. Copyright © 2011 Elsevier B.V. All rights reserved.

Identifying sources of emerging organic contaminants in a mixed use watershed using principal components analysis.

Science.gov (United States)

Karpuzcu, M Ekrem; Fairbairn, David; Arnold, William A; Barber, Brian L; Kaufenberg, Elizabeth; Koskinen, William C; Novak, Paige J; Rice, Pamela J; Swackhamer, Deborah L

2014-01-01

Principal components analysis (PCA) was used to identify sources of emerging organic contaminants in the Zumbro River watershed in Southeastern Minnesota. Two main principal components (PCs) were identified, which together explained more than 50% of the variance in the data. Principal Component 1 (PC1) was attributed to urban wastewater-derived sources, including municipal wastewater and residential septic tank effluents, while Principal Component 2 (PC2) was attributed to agricultural sources. The variances of the concentrations of cotinine, DEET and the prescription drugs carbamazepine, erythromycin and sulfamethoxazole were best explained by PC1, while the variances of the concentrations of the agricultural pesticides atrazine, metolachlor and acetochlor were best explained by PC2. Mixed use compounds carbaryl, iprodione and daidzein did not specifically group with either PC1 or PC2. Furthermore, despite the fact that caffeine and acetaminophen have been historically associated with human use, they could not be attributed to a single dominant land use category (e.g., urban/residential or agricultural). Contributions from septic systems did not clarify the source for these two compounds, suggesting that additional sources, such as runoff from biosolid-amended soils, may exist. Based on these results, PCA may be a useful way to broadly categorize the sources of new and previously uncharacterized emerging contaminants or may help to clarify transport pathways in a given area. Acetaminophen and caffeine were not ideal markers for urban/residential contamination sources in the study area and may need to be reconsidered as such in other areas as well.

A multi-dimensional functional principal components analysis of EEG data.

Science.gov (United States)

Hasenstab, Kyle; Scheffler, Aaron; Telesca, Donatello; Sugar, Catherine A; Jeste, Shafali; DiStefano, Charlotte; Şentürk, Damla

2017-09-01

The electroencephalography (EEG) data created in event-related potential (ERP) experiments have a complex high-dimensional structure. Each stimulus presentation, or trial, generates an ERP waveform which is an instance of functional data. The experiments are made up of sequences of multiple trials, resulting in longitudinal functional data and moreover, responses are recorded at multiple electrodes on the scalp, adding an electrode dimension. Traditional EEG analyses involve multiple simplifications of this structure to increase the signal-to-noise ratio, effectively collapsing the functional and longitudinal components by identifying key features of the ERPs and averaging them across trials. Motivated by an implicit learning paradigm used in autism research in which the functional, longitudinal, and electrode components all have critical interpretations, we propose a multidimensional functional principal components analysis (MD-FPCA) technique which does not collapse any of the dimensions of the ERP data. The proposed decomposition is based on separation of the total variation into subject and subunit level variation which are further decomposed in a two-stage functional principal components analysis. The proposed methodology is shown to be useful for modeling longitudinal trends in the ERP functions, leading to novel insights into the learning patterns of children with Autism Spectrum Disorder (ASD) and their typically developing peers as well as comparisons between the two groups. Finite sample properties of MD-FPCA are further studied via extensive simulations. © 2017, The International Biometric Society.

Efficient real time OD matrix estimation based on principal component analysis

NARCIS (Netherlands)

Djukic, T.; Flötteröd, G.; Van Lint, H.; Hoogendoorn, S.P.

2012-01-01

In this paper we explore the idea of dimensionality reduction and approximation of OD demand based on principal component analysis (PCA). First, we show how we can apply PCA to linearly transform the high dimensional OD matrices into the lower dimensional space without significant loss of accuracy.

The influence of iliotibial band syndrome history on running biomechanics examined via principal components analysis.

Science.gov (United States)

Foch, Eric; Milner, Clare E

2014-01-03

Iliotibial band syndrome (ITBS) is a common knee overuse injury among female runners. Atypical discrete trunk and lower extremity biomechanics during running may be associated with the etiology of ITBS. Examining discrete data points limits the interpretation of a waveform to a single value. Characterizing entire kinematic and kinetic waveforms may provide additional insight into biomechanical factors associated with ITBS. Therefore, the purpose of this cross-sectional investigation was to determine whether female runners with previous ITBS exhibited differences in kinematics and kinetics compared to controls using a principal components analysis (PCA) approach. Forty participants comprised two groups: previous ITBS and controls. Principal component scores were retained for the first three principal components and were analyzed using independent t-tests. The retained principal components accounted for 93-99% of the total variance within each waveform. Runners with previous ITBS exhibited low principal component one scores for frontal plane hip angle. Principal component one accounted for the overall magnitude in hip adduction which indicated that runners with previous ITBS assumed less hip adduction throughout stance. No differences in the remaining retained principal component scores for the waveforms were detected among groups. A smaller hip adduction angle throughout the stance phase of running may be a compensatory strategy to limit iliotibial band strain. This running strategy may have persisted after ITBS symptoms subsided. © 2013 Published by Elsevier Ltd.

Principal Component Analysis Based Measure of Structural Holes

Science.gov (United States)

Deng, Shiguo; Zhang, Wenqing; Yang, Huijie

2013-02-01

Based upon principal component analysis, a new measure called compressibility coefficient is proposed to evaluate structural holes in networks. This measure incorporates a new effect from identical patterns in networks. It is found that compressibility coefficient for Watts-Strogatz small-world networks increases monotonically with the rewiring probability and saturates to that for the corresponding shuffled networks. While compressibility coefficient for extended Barabasi-Albert scale-free networks decreases monotonically with the preferential effect and is significantly large compared with that for corresponding shuffled networks. This measure is helpful in diverse research fields to evaluate global efficiency of networks.

Nonlinear Principal Component Analysis Using Strong Tracking Filter

Institute of Scientific and Technical Information of China (English)

无

2007-01-01

The paper analyzes the problem of blind source separation (BSS) based on the nonlinear principal component analysis (NPCA) criterion. An adaptive strong tracking filter (STF) based algorithm was developed, which is immune to system model mismatches. Simulations demonstrate that the algorithm converges quickly and has satisfactory steady-state accuracy. The Kalman filtering algorithm and the recursive leastsquares type algorithm are shown to be special cases of the STF algorithm. Since the forgetting factor is adaptively updated by adjustment of the Kalman gain, the STF scheme provides more powerful tracking capability than the Kalman filtering algorithm and recursive least-squares algorithm.

Efficient training of multilayer perceptrons using principal component analysis

International Nuclear Information System (INIS)

Bunzmann, Christoph; Urbanczik, Robert; Biehl, Michael

2005-01-01

A training algorithm for multilayer perceptrons is discussed and studied in detail, which relates to the technique of principal component analysis. The latter is performed with respect to a correlation matrix computed from the example inputs and their target outputs. Typical properties of the training procedure are investigated by means of a statistical physics analysis in models of learning regression and classification tasks. We demonstrate that the procedure requires by far fewer examples for good generalization than traditional online training. For networks with a large number of hidden units we derive the training prescription which achieves, within our model, the optimal generalization behavior

Quantitative descriptive analysis and principal component analysis for sensory characterization of Indian milk product cham-cham.

Science.gov (United States)

Puri, Ritika; Khamrui, Kaushik; Khetra, Yogesh; Malhotra, Ravinder; Devraja, H C

2016-02-01

Promising development and expansion in the market of cham-cham, a traditional Indian dairy product is expected in the coming future with the organized production of this milk product by some large dairies. The objective of this study was to document the extent of variation in sensory properties of market samples of cham-cham collected from four different locations known for their excellence in cham-cham production and to find out the attributes that govern much of variation in sensory scores of this product using quantitative descriptive analysis (QDA) and principal component analysis (PCA). QDA revealed significant (p sensory attributes of cham-cham among the market samples. PCA identified four significant principal components that accounted for 72.4 % of the variation in the sensory data. Factor scores of each of the four principal components which primarily correspond to sweetness/shape/dryness of interior, surface appearance/surface dryness, rancid and firmness attributes specify the location of each market sample along each of the axes in 3-D graphs. These findings demonstrate the utility of quantitative descriptive analysis for identifying and measuring attributes of cham-cham that contribute most to its sensory acceptability.

Assessing prescription drug abuse using functional principal component analysis (FPCA) of wastewater data.

Science.gov (United States)

Salvatore, Stefania; Røislien, Jo; Baz-Lomba, Jose A; Bramness, Jørgen G

2017-03-01

Wastewater-based epidemiology is an alternative method for estimating the collective drug use in a community. We applied functional data analysis, a statistical framework developed for analysing curve data, to investigate weekly temporal patterns in wastewater measurements of three prescription drugs with known abuse potential: methadone, oxazepam and methylphenidate, comparing them to positive and negative control drugs. Sewage samples were collected in February 2014 from a wastewater treatment plant in Oslo, Norway. The weekly pattern of each drug was extracted by fitting of generalized additive models, using trigonometric functions to model the cyclic behaviour. From the weekly component, the main temporal features were then extracted using functional principal component analysis. Results are presented through the functional principal components (FPCs) and corresponding FPC scores. Clinically, the most important weekly feature of the wastewater-based epidemiology data was the second FPC, representing the difference between average midweek level and a peak during the weekend, representing possible recreational use of a drug in the weekend. Estimated scores on this FPC indicated recreational use of methylphenidate, with a high weekend peak, but not for methadone and oxazepam. The functional principal component analysis uncovered clinically important temporal features of the weekly patterns of the use of prescription drugs detected from wastewater analysis. This may be used as a post-marketing surveillance method to monitor prescription drugs with abuse potential. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

Application of principal component analysis (PCA) as a sensory assessment tool for fermented food products.

Science.gov (United States)

Ghosh, Debasree; Chattopadhyay, Parimal

2012-06-01

The objective of the work was to use the method of quantitative descriptive analysis (QDA) to describe the sensory attributes of the fermented food products prepared with the incorporation of lactic cultures. Panellists were selected and trained to evaluate various attributes specially color and appearance, body texture, flavor, overall acceptability and acidity of the fermented food products like cow milk curd and soymilk curd, idli, sauerkraut and probiotic ice cream. Principal component analysis (PCA) identified the six significant principal components that accounted for more than 90% of the variance in the sensory attribute data. Overall product quality was modelled as a function of principal components using multiple least squares regression (R (2) = 0.8). The result from PCA was statistically analyzed by analysis of variance (ANOVA). These findings demonstrate the utility of quantitative descriptive analysis for identifying and measuring the fermented food product attributes that are important for consumer acceptability.

Facilitating in vivo tumor localization by principal component analysis based on dynamic fluorescence molecular imaging

Science.gov (United States)

Gao, Yang; Chen, Maomao; Wu, Junyu; Zhou, Yuan; Cai, Chuangjian; Wang, Daliang; Luo, Jianwen

2017-09-01

Fluorescence molecular imaging has been used to target tumors in mice with xenograft tumors. However, tumor imaging is largely distorted by the aggregation of fluorescent probes in the liver. A principal component analysis (PCA)-based strategy was applied on the in vivo dynamic fluorescence imaging results of three mice with xenograft tumors to facilitate tumor imaging, with the help of a tumor-specific fluorescent probe. Tumor-relevant features were extracted from the original images by PCA and represented by the principal component (PC) maps. The second principal component (PC2) map represented the tumor-related features, and the first principal component (PC1) map retained the original pharmacokinetic profiles, especially of the liver. The distribution patterns of the PC2 map of the tumor-bearing mice were in good agreement with the actual tumor location. The tumor-to-liver ratio and contrast-to-noise ratio were significantly higher on the PC2 map than on the original images, thus distinguishing the tumor from its nearby fluorescence noise of liver. The results suggest that the PC2 map could serve as a bioimaging marker to facilitate in vivo tumor localization, and dynamic fluorescence molecular imaging with PCA could be a valuable tool for future studies of in vivo tumor metabolism and progression.

Fluoride in the Serra Geral Aquifer System: Source Evaluation Using Stable Isotopes and Principal Component Analysis

OpenAIRE

Nanni, Arthur Schmidt; Roisenberg, Ari; de Hollanda, Maria Helena Bezerra Maia; Marimon, Maria Paula Casagrande; Viero, Antonio Pedro; Scheibe, Luiz Fernando

2013-01-01

Groundwater with anomalous fluoride content and water mixture patterns were studied in the fractured Serra Geral Aquifer System, a basaltic to rhyolitic geological unit, using a principal component analysis interpretation of groundwater chemical data from 309 deep wells distributed in the Rio Grande do Sul State, Southern Brazil. A four-component model that explains 81% of the total variance in the Principal Component Analysis is suggested. Six hydrochemical groups were identified. δ18O and δ...

Principal component analysis of FDG PET in amnestic MCI

International Nuclear Information System (INIS)

Nobili, Flavio; Girtler, Nicola; Brugnolo, Andrea; Dessi, Barbara; Rodriguez, Guido; Salmaso, Dario; Morbelli, Silvia; Piccardo, Arnoldo; Larsson, Stig A.; Pagani, Marco

2008-01-01

The purpose of the study is to evaluate the combined accuracy of episodic memory performance and 18 F-FDG PET in identifying patients with amnestic mild cognitive impairment (aMCI) converting to Alzheimer's disease (AD), aMCI non-converters, and controls. Thirty-three patients with aMCI and 15 controls (CTR) were followed up for a mean of 21 months. Eleven patients developed AD (MCI/AD) and 22 remained with aMCI (MCI/MCI). 18 F-FDG PET volumetric regions of interest underwent principal component analysis (PCA) that identified 12 principal components (PC), expressed by coarse component scores (CCS). Discriminant analysis was performed using the significant PCs and episodic memory scores. PCA highlighted relative hypometabolism in PC5, including bilateral posterior cingulate and left temporal pole, and in PC7, including the bilateral orbitofrontal cortex, both in MCI/MCI and MCI/AD vs CTR. PC5 itself plus PC12, including the left lateral frontal cortex (LFC: BAs 44, 45, 46, 47), were significantly different between MCI/AD and MCI/MCI. By a three-group discriminant analysis, CTR were more accurately identified by PET-CCS + delayed recall score (100%), MCI/MCI by PET-CCS + either immediate or delayed recall scores (91%), while MCI/AD was identified by PET-CCS alone (82%). PET increased by 25% the correct allocations achieved by memory scores, while memory scores increased by 15% the correct allocations achieved by PET. Combining memory performance and 18 F-FDG PET yielded a higher accuracy than each single tool in identifying CTR and MCI/MCI. The PC containing bilateral posterior cingulate and left temporal pole was the hallmark of MCI/MCI patients, while the PC including the left LFC was the hallmark of conversion to AD. (orig.)

Principal component analysis of FDG PET in amnestic MCI

Energy Technology Data Exchange (ETDEWEB)

Nobili, Flavio; Girtler, Nicola; Brugnolo, Andrea; Dessi, Barbara; Rodriguez, Guido [University of Genoa, Clinical Neurophysiology, Department of Endocrinological and Medical Sciences, Genoa (Italy); S. Martino Hospital, Alzheimer Evaluation Unit, Genoa (Italy); S. Martino Hospital, Head-Neck Department, Genoa (Italy); Salmaso, Dario [CNR, Institute of Cognitive Sciences and Technologies, Rome (Italy); CNR, Institute of Cognitive Sciences and Technologies, Padua (Italy); Morbelli, Silvia [University of Genoa, Nuclear Medicine Unit, Department of Internal Medicine, Genoa (Italy); Piccardo, Arnoldo [Galliera Hospital, Nuclear Medicine Unit, Department of Imaging Diagnostics, Genoa (Italy); Larsson, Stig A. [Karolinska Hospital, Department of Nuclear Medicine, Stockholm (Sweden); Pagani, Marco [CNR, Institute of Cognitive Sciences and Technologies, Rome (Italy); CNR, Institute of Cognitive Sciences and Technologies, Padua (Italy); Karolinska Hospital, Department of Nuclear Medicine, Stockholm (Sweden)

2008-12-15

The purpose of the study is to evaluate the combined accuracy of episodic memory performance and {sup 18}F-FDG PET in identifying patients with amnestic mild cognitive impairment (aMCI) converting to Alzheimer's disease (AD), aMCI non-converters, and controls. Thirty-three patients with aMCI and 15 controls (CTR) were followed up for a mean of 21 months. Eleven patients developed AD (MCI/AD) and 22 remained with aMCI (MCI/MCI). {sup 18}F-FDG PET volumetric regions of interest underwent principal component analysis (PCA) that identified 12 principal components (PC), expressed by coarse component scores (CCS). Discriminant analysis was performed using the significant PCs and episodic memory scores. PCA highlighted relative hypometabolism in PC5, including bilateral posterior cingulate and left temporal pole, and in PC7, including the bilateral orbitofrontal cortex, both in MCI/MCI and MCI/AD vs CTR. PC5 itself plus PC12, including the left lateral frontal cortex (LFC: BAs 44, 45, 46, 47), were significantly different between MCI/AD and MCI/MCI. By a three-group discriminant analysis, CTR were more accurately identified by PET-CCS + delayed recall score (100%), MCI/MCI by PET-CCS + either immediate or delayed recall scores (91%), while MCI/AD was identified by PET-CCS alone (82%). PET increased by 25% the correct allocations achieved by memory scores, while memory scores increased by 15% the correct allocations achieved by PET. Combining memory performance and {sup 18}F-FDG PET yielded a higher accuracy than each single tool in identifying CTR and MCI/MCI. The PC containing bilateral posterior cingulate and left temporal pole was the hallmark of MCI/MCI patients, while the PC including the left LFC was the hallmark of conversion to AD. (orig.)

Machine learning of frustrated classical spin models. I. Principal component analysis

Science.gov (United States)

Wang, Ce; Zhai, Hui

2017-10-01

This work aims at determining whether artificial intelligence can recognize a phase transition without prior human knowledge. If this were successful, it could be applied to, for instance, analyzing data from the quantum simulation of unsolved physical models. Toward this goal, we first need to apply the machine learning algorithm to well-understood models and see whether the outputs are consistent with our prior knowledge, which serves as the benchmark for this approach. In this work, we feed the computer data generated by the classical Monte Carlo simulation for the X Y model in frustrated triangular and union jack lattices, which has two order parameters and exhibits two phase transitions. We show that the outputs of the principal component analysis agree very well with our understanding of different orders in different phases, and the temperature dependences of the major components detect the nature and the locations of the phase transitions. Our work offers promise for using machine learning techniques to study sophisticated statistical models, and our results can be further improved by using principal component analysis with kernel tricks and the neural network method.

Oil classification using X-ray scattering and principal component analysis

Energy Technology Data Exchange (ETDEWEB)

Almeida, Danielle S.; Souza, Amanda S.; Lopes, Ricardo T., E-mail: dani.almeida84@gmail.com, E-mail: ricardo@lin.ufrj.br, E-mail: amandass@bioqmed.ufrj.br [Universidade Federal do Rio de Janeiro (UFRJ), Rio de Janeiro, RJ (Brazil); Oliveira, Davi F.; Anjos, Marcelino J., E-mail: davi.oliveira@uerj.br, E-mail: marcelin@uerj.br [Universidade do Estado do Rio de Janeiro (UERJ), Rio de Janeiro, RJ (Brazil). Inst. de Fisica Armando Dias Tavares

2015-07-01

X-ray scattering techniques have been considered promising for the classification and characterization of many types of samples. This study employed this technique combined with chemical analysis and multivariate analysis to characterize 54 vegetable oil samples (being 25 olive oils)with different properties obtained in commercial establishments in Rio de Janeiro city. The samples were chemically analyzed using the following indexes: iodine, acidity, saponification and peroxide. In order to obtain the X-ray scattering spectrum, an X-ray tube with a silver anode operating at 40kV and 50 μA was used. The results showed that oils cab ne divided in tow large groups: olive oils and non-olive oils. Additionally, in a multivariate analysis (Principal Component Analysis - PCA), two components were obtained and accounted for more than 80% of the variance. One component was associated with chemical parameters and the other with scattering profiles of each sample. Results showed that use of X-ray scattering spectra combined with chemical analysis and PCA can be a fast, cheap and efficient method for vegetable oil characterization. (author)

Oil classification using X-ray scattering and principal component analysis

International Nuclear Information System (INIS)

Almeida, Danielle S.; Souza, Amanda S.; Lopes, Ricardo T.; Oliveira, Davi F.; Anjos, Marcelino J.

2015-01-01

X-ray scattering techniques have been considered promising for the classification and characterization of many types of samples. This study employed this technique combined with chemical analysis and multivariate analysis to characterize 54 vegetable oil samples (being 25 olive oils)with different properties obtained in commercial establishments in Rio de Janeiro city. The samples were chemically analyzed using the following indexes: iodine, acidity, saponification and peroxide. In order to obtain the X-ray scattering spectrum, an X-ray tube with a silver anode operating at 40kV and 50 μA was used. The results showed that oils cab ne divided in tow large groups: olive oils and non-olive oils. Additionally, in a multivariate analysis (Principal Component Analysis - PCA), two components were obtained and accounted for more than 80% of the variance. One component was associated with chemical parameters and the other with scattering profiles of each sample. Results showed that use of X-ray scattering spectra combined with chemical analysis and PCA can be a fast, cheap and efficient method for vegetable oil characterization. (author)

Fast grasping of unknown objects using principal component analysis

Science.gov (United States)

Lei, Qujiang; Chen, Guangming; Wisse, Martijn

2017-09-01

Fast grasping of unknown objects has crucial impact on the efficiency of robot manipulation especially subjected to unfamiliar environments. In order to accelerate grasping speed of unknown objects, principal component analysis is utilized to direct the grasping process. In particular, a single-view partial point cloud is constructed and grasp candidates are allocated along the principal axis. Force balance optimization is employed to analyze possible graspable areas. The obtained graspable area with the minimal resultant force is the best zone for the final grasping execution. It is shown that an unknown object can be more quickly grasped provided that the component analysis principle axis is determined using single-view partial point cloud. To cope with the grasp uncertainty, robot motion is assisted to obtain a new viewpoint. Virtual exploration and experimental tests are carried out to verify this fast gasping algorithm. Both simulation and experimental tests demonstrated excellent performances based on the results of grasping a series of unknown objects. To minimize the grasping uncertainty, the merits of the robot hardware with two 3D cameras can be utilized to suffice the partial point cloud. As a result of utilizing the robot hardware, the grasping reliance is highly enhanced. Therefore, this research demonstrates practical significance for increasing grasping speed and thus increasing robot efficiency under unpredictable environments.

Using principal component analysis to understand the variability of PDS 456

Science.gov (United States)

Parker, M. L.; Reeves, J. N.; Matzeu, G. A.; Buisson, D. J. K.; Fabian, A. C.

2018-02-01

We present a spectral-variability analysis of the low-redshift quasar PDS 456 using principal component analysis. In the XMM-Newton data, we find a strong peak in the first principal component at the energy of the Fe absorption line from the highly blueshifted outflow. This indicates that the absorption feature is more variable than the continuum, and that it is responding to the continuum. We find qualitatively different behaviour in the Suzaku data, which is dominated by changes in the column density of neutral absorption. In this case, we find no evidence of the absorption produced by the highly ionized gas being correlated with this variability. Additionally, we perform simulations of the source variability, and demonstrate that PCA can trivially distinguish between outflow variability correlated, anticorrelated and un-correlated with the continuum flux. Here, the observed anticorrelation between the absorption line equivalent width and the continuum flux may be due to the ionization of the wind responding to the continuum. Finally, we compare our results with those found in the narrow-line Seyfert 1 IRAS 13224-3809. We find that the Fe K UFO feature is sharper and more prominent in PDS 456, but that it lacks the lower energy features from lighter elements found in IRAS 13224-3809, presumably due to differences in ionization.

Fall detection in walking robots by multi-way principal component analysis

NARCIS (Netherlands)

Karssen, J.G.; Wisse, M.

2008-01-01

Large disturbances can cause a biped to fall. If an upcoming fall can be detected, damage can be minimized or the fall can be prevented. We introduce the multi-way principal component analysis (MPCA) method for the detection of upcoming falls. We study the detection capability of the MPCA method in

Nonlinear principal component analysis and its applications

CERN Document Server

Mori, Yuichi; Makino, Naomichi

2016-01-01

This book expounds the principle and related applications of nonlinear principal component analysis (PCA), which is useful method to analyze mixed measurement levels data. In the part dealing with the principle, after a brief introduction of ordinary PCA, a PCA for categorical data (nominal and ordinal) is introduced as nonlinear PCA, in which an optimal scaling technique is used to quantify the categorical variables. The alternating least squares (ALS) is the main algorithm in the method. Multiple correspondence analysis (MCA), a special case of nonlinear PCA, is also introduced. All formulations in these methods are integrated in the same manner as matrix operations. Because any measurement levels data can be treated consistently as numerical data and ALS is a very powerful tool for estimations, the methods can be utilized in a variety of fields such as biometrics, econometrics, psychometrics, and sociology. In the applications part of the book, four applications are introduced: variable selection for mixed...

Derivation of the reduced reaction mechanisms of ozone depletion events in the Arctic spring by using concentration sensitivity analysis and principal component analysis

Directory of Open Access Journals (Sweden)

L. Cao

2016-12-01

Full Text Available The ozone depletion events (ODEs in the springtime Arctic have been investigated since the 1980s. It is found that the depletion of ozone is highly associated with an auto-catalytic reaction cycle, which involves mostly the bromine-containing compounds. Moreover, bromide stored in various substrates in the Arctic such as the underlying surface covered by ice and snow can be also activated by the absorbed HOBr. Subsequently, this leads to an explosive increase of the bromine amount in the troposphere, which is called the “bromine explosion mechanism”. In the present study, a reaction scheme representing the chemistry of ozone depletion and halogen release is processed with two different mechanism reduction approaches, namely, the concentration sensitivity analysis and the principal component analysis. In the concentration sensitivity analysis, the interdependence of the mixing ratios of ozone and principal bromine species on the rate of each reaction in the ODE mechanism is identified. Furthermore, the most influential reactions in different time periods of ODEs are also revealed. By removing 11 reactions with the maximum absolute values of sensitivities lower than 10 %, a reduced reaction mechanism of ODEs is derived. The onsets of each time period of ODEs in simulations using the original reaction mechanism and the reduced reaction mechanism are identical while the maximum deviation of the mixing ratio of principal bromine species between different mechanisms is found to be less than 1 %. By performing the principal component analysis on an array of the sensitivity matrices, the dependence of a particular species concentration on a combination of the reaction rates in the mechanism is revealed. Redundant reactions are indicated by principal components corresponding to small eigenvalues and insignificant elements in principal components with large eigenvalues. Through this investigation, aside from the 11 reactions identified as

Application of principal component analysis to ecodiversity assessment of postglacial landscape (on the example of Debnica Kaszubska commune, Middle Pomerania)

Science.gov (United States)

Wojciechowski, Adam

2017-04-01

In order to assess ecodiversity understood as a comprehensive natural landscape factor (Jedicke 2001), it is necessary to apply research methods which recognize the environment in a holistic way. Principal component analysis may be considered as one of such methods as it allows to distinguish the main factors determining landscape diversity on the one hand, and enables to discover regularities shaping the relationships between various elements of the environment under study on the other hand. The procedure adopted to assess ecodiversity with the use of principal component analysis involves: a) determining and selecting appropriate factors of the assessed environment qualities (hypsometric, geological, hydrographic, plant, and others); b) calculating the absolute value of individual qualities for the basic areas under analysis (e.g. river length, forest area, altitude differences, etc.); c) principal components analysis and obtaining factor maps (maps of selected components); d) generating a resultant, detailed map and isolating several classes of ecodiversity. An assessment of ecodiversity with the use of principal component analysis was conducted in the test area of 299,67 km2 in Debnica Kaszubska commune. The whole commune is situated in the Weichselian glaciation area of high hypsometric and morphological diversity as well as high geo- and biodiversity. The analysis was based on topographical maps of the commune area in scale 1:25000 and maps of forest habitats. Consequently, nine factors reflecting basic environment elements were calculated: maximum height (m), minimum height (m), average height (m), the length of watercourses (km), the area of water reservoirs (m2), total forest area (ha), coniferous forests habitats area (ha), deciduous forest habitats area (ha), alder habitats area (ha). The values for individual factors were analysed for 358 grid cells of 1 km2. Based on the principal components analysis, four major factors affecting commune ecodiversity

Principal Component Analysis: Resources for an Essential Application of Linear Algebra

Science.gov (United States)

Pankavich, Stephen; Swanson, Rebecca

2015-01-01

Principal Component Analysis (PCA) is a highly useful topic within an introductory Linear Algebra course, especially since it can be used to incorporate a number of applied projects. This method represents an essential application and extension of the Spectral Theorem and is commonly used within a variety of fields, including statistics,…

Principal component analysis of dynamic fluorescence images for diagnosis of diabetic vasculopathy

Science.gov (United States)

Seo, Jihye; An, Yuri; Lee, Jungsul; Ku, Taeyun; Kang, Yujung; Ahn, Chulwoo; Choi, Chulhee

2016-04-01

Indocyanine green (ICG) fluorescence imaging has been clinically used for noninvasive visualizations of vascular structures. We have previously developed a diagnostic system based on dynamic ICG fluorescence imaging for sensitive detection of vascular disorders. However, because high-dimensional raw data were used, the analysis of the ICG dynamics proved difficult. We used principal component analysis (PCA) in this study to extract important elements without significant loss of information. We examined ICG spatiotemporal profiles and identified critical features related to vascular disorders. PCA time courses of the first three components showed a distinct pattern in diabetic patients. Among the major components, the second principal component (PC2) represented arterial-like features. The explained variance of PC2 in diabetic patients was significantly lower than in normal controls. To visualize the spatial pattern of PCs, pixels were mapped with red, green, and blue channels. The PC2 score showed an inverse pattern between normal controls and diabetic patients. We propose that PC2 can be used as a representative bioimaging marker for the screening of vascular diseases. It may also be useful in simple extractions of arterial-like features.

PRINCIPAL COMPONENT ANALYSIS (PCA DAN APLIKASINYA DENGAN SPSS

Directory of Open Access Journals (Sweden)

Hermita Bus Umar

2009-03-01

Full Text Available PCA (Principal Component Analysis are statistical techniques applied to a single set of variables when the researcher is interested in discovering which variables in the setform coherent subset that are relativity independent of one another.Variables that are correlated with one another but largely independent of other subset of variables are combined into factors. The Coals of PCA to which each variables is explained by each dimension. Step in PCA include selecting and mean measuring a set of variables, preparing the correlation matrix, extracting a set offactors from the correlation matrixs. Rotating the factor to increase interpretabilitv and interpreting the result.

Power Transformer Differential Protection Based on Neural Network Principal Component Analysis, Harmonic Restraint and Park's Plots

OpenAIRE

Tripathy, Manoj

2012-01-01

This paper describes a new approach for power transformer differential protection which is based on the wave-shape recognition technique. An algorithm based on neural network principal component analysis (NNPCA) with back-propagation learning is proposed for digital differential protection of power transformer. The principal component analysis is used to preprocess the data from power system in order to eliminate redundant information and enhance hidden pattern of differential current to disc...

Detecting Genomic Signatures of Natural Selection with Principal Component Analysis: Application to the 1000 Genomes Data.

Science.gov (United States)

Duforet-Frebourg, Nicolas; Luu, Keurcien; Laval, Guillaume; Bazin, Eric; Blum, Michael G B

2016-04-01

To characterize natural selection, various analytical methods for detecting candidate genomic regions have been developed. We propose to perform genome-wide scans of natural selection using principal component analysis (PCA). We show that the common FST index of genetic differentiation between populations can be viewed as the proportion of variance explained by the principal components. Considering the correlations between genetic variants and each principal component provides a conceptual framework to detect genetic variants involved in local adaptation without any prior definition of populations. To validate the PCA-based approach, we consider the 1000 Genomes data (phase 1) considering 850 individuals coming from Africa, Asia, and Europe. The number of genetic variants is of the order of 36 millions obtained with a low-coverage sequencing depth (3×). The correlations between genetic variation and each principal component provide well-known targets for positive selection (EDAR, SLC24A5, SLC45A2, DARC), and also new candidate genes (APPBPP2, TP1A1, RTTN, KCNMA, MYO5C) and noncoding RNAs. In addition to identifying genes involved in biological adaptation, we identify two biological pathways involved in polygenic adaptation that are related to the innate immune system (beta defensins) and to lipid metabolism (fatty acid omega oxidation). An additional analysis of European data shows that a genome scan based on PCA retrieves classical examples of local adaptation even when there are no well-defined populations. PCA-based statistics, implemented in the PCAdapt R package and the PCAdapt fast open-source software, retrieve well-known signals of human adaptation, which is encouraging for future whole-genome sequencing project, especially when defining populations is difficult. © The Author(s) 2015. Published by Oxford University Press on behalf of the Society for Molecular Biology and Evolution.

Principal component analysis of psoriasis lesions images

DEFF Research Database (Denmark)

Maletti, Gabriela Mariel; Ersbøll, Bjarne Kjær

2003-01-01

A set of RGB images of psoriasis lesions is used. By visual examination of these images, there seem to be no common pattern that could be used to find and align the lesions within and between sessions. It is expected that the principal components of the original images could be useful during future...

Visualizing solvent mediated phase transformation behavior of carbamazepine polymorphs by principal component analysis

DEFF Research Database (Denmark)

Tian, Fang; Rades, Thomas; Sandler, Niklas

2008-01-01

The purpose of this research is to gain a greater insight into the hydrate formation processes of different carbamazepine (CBZ) anhydrate forms in aqueous suspension, where principal component analysis (PCA) was applied for data analysis. The capability of PCA to visualize and to reveal simplified...

APPLYING PRINCIPAL COMPONENT ANALYSIS, MULTILAYER PERCEPTRON AND SELF-ORGANIZING MAPS FOR OPTICAL CHARACTER RECOGNITION

Directory of Open Access Journals (Sweden)

Khuat Thanh Tung

2016-11-01

Full Text Available Optical Character Recognition plays an important role in data storage and data mining when the number of documents stored as images is increasing. It is expected to find the ways to convert images of typewritten or printed text into machine-encoded text effectively in order to support for the process of information handling effectively. In this paper, therefore, the techniques which are being used to convert image into editable text in the computer such as principal component analysis, multilayer perceptron network, self-organizing maps, and improved multilayer neural network using principal component analysis are experimented. The obtained results indicated the effectiveness and feasibility of the proposed methods.

Sparse supervised principal component analysis (SSPCA) for dimension reduction and variable selection

DEFF Research Database (Denmark)

Sharifzadeh, Sara; Ghodsi, Ali; Clemmensen, Line H.

2017-01-01

Principal component analysis (PCA) is one of the main unsupervised pre-processing methods for dimension reduction. When the training labels are available, it is worth using a supervised PCA strategy. In cases that both dimension reduction and variable selection are required, sparse PCA (SPCA...

Research on Air Quality Evaluation based on Principal Component Analysis

Science.gov (United States)

Wang, Xing; Wang, Zilin; Guo, Min; Chen, Wei; Zhang, Huan

2018-01-01

Economic growth has led to environmental capacity decline and the deterioration of air quality. Air quality evaluation as a fundamental of environmental monitoring and air pollution control has become increasingly important. Based on the principal component analysis (PCA), this paper evaluates the air quality of a large city in Beijing-Tianjin-Hebei Area in recent 10 years and identifies influencing factors, in order to provide reference to air quality management and air pollution control.

Demixed principal component analysis of neural population data.

Science.gov (United States)

Kobak, Dmitry; Brendel, Wieland; Constantinidis, Christos; Feierstein, Claudia E; Kepecs, Adam; Mainen, Zachary F; Qi, Xue-Lian; Romo, Ranulfo; Uchida, Naoshige; Machens, Christian K

2016-04-12

Neurons in higher cortical areas, such as the prefrontal cortex, are often tuned to a variety of sensory and motor variables, and are therefore said to display mixed selectivity. This complexity of single neuron responses can obscure what information these areas represent and how it is represented. Here we demonstrate the advantages of a new dimensionality reduction technique, demixed principal component analysis (dPCA), that decomposes population activity into a few components. In addition to systematically capturing the majority of the variance of the data, dPCA also exposes the dependence of the neural representation on task parameters such as stimuli, decisions, or rewards. To illustrate our method we reanalyze population data from four datasets comprising different species, different cortical areas and different experimental tasks. In each case, dPCA provides a concise way of visualizing the data that summarizes the task-dependent features of the population response in a single figure.

THE STUDY OF THE CHARACTERIZATION INDICES OF FABRICS BY PRINCIPAL COMPONENT ANALYSIS METHOD

Directory of Open Access Journals (Sweden)

HRISTIAN Liliana

2017-05-01

Full Text Available The paper was pursued to prioritize the worsted fabrics type, for the manufacture of outerwear products by characterization indeces of fabrics, using the mathematical model of Principal Component Analysis (PCA. There are a number of variables with a certain influence on the quality of fabrics, but some of these variables are more important than others, so it is useful to identify those variables to a better understanding the factors which can lead the improving of the fabrics quality. A solution to this problem can be the application of a method of factorial analysis, the so-called Principal Component Analysis, with the final goal of establishing and analyzing those variables which influence in a significant manner the internal structure of combed wool fabrics according to armire type. By applying PCA it is obtained a small number of the linear combinations (principal components from a set of variables, describing the internal structure of the fabrics, which can hold as much information as possible from the original variables. Data analysis is an important initial step in decision making, allowing identification of the causes that lead to a decision- making situations. Thus it is the action of transforming the initial data in order to extract useful information and to facilitate reaching the conclusions. The process of data analysis can be defined as a sequence of steps aimed at formulating hypotheses, collecting primary information and validation, the construction of the mathematical model describing this phenomenon and reaching these conclusions about the behavior of this model.

[Principal component analysis and cluster analysis of inorganic elements in sea cucumber Apostichopus japonicus].

Science.gov (United States)

Liu, Xiao-Fang; Xue, Chang-Hu; Wang, Yu-Ming; Li, Zhao-Jie; Xue, Yong; Xu, Jie

2011-11-01

The present study is to investigate the feasibility of multi-elements analysis in determination of the geographical origin of sea cucumber Apostichopus japonicus, and to make choice of the effective tracers in sea cucumber Apostichopus japonicus geographical origin assessment. The content of the elements such as Al, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, As, Se, Mo, Cd, Hg and Pb in sea cucumber Apostichopus japonicus samples from seven places of geographical origin were determined by means of ICP-MS. The results were used for the development of elements database. Cluster analysis(CA) and principal component analysis (PCA) were applied to differentiate the sea cucumber Apostichopus japonicus geographical origin. Three principal components which accounted for over 89% of the total variance were extracted from the standardized data. The results of Q-type cluster analysis showed that the 26 samples could be clustered reasonably into five groups, the classification results were significantly associated with the marine distribution of the sea cucumber Apostichopus japonicus samples. The CA and PCA were the effective methods for elements analysis of sea cucumber Apostichopus japonicus samples. The content of the mineral elements in sea cucumber Apostichopus japonicus samples was good chemical descriptors for differentiating their geographical origins.

Identification of Counterfeit Alcoholic Beverages Using Cluster Analysis in Principal-Component Space

Science.gov (United States)

Khodasevich, M. A.; Sinitsyn, G. V.; Gres'ko, M. A.; Dolya, V. M.; Rogovaya, M. V.; Kazberuk, A. V.

2017-07-01

A study of 153 brands of commercial vodka products showed that counterfeit samples could be identified by introducing a unified additive at the minimum concentration acceptable for instrumental detection and multivariate analysis of UV-Vis transmission spectra. Counterfeit products were detected with 100% probability by using hierarchical cluster analysis or the C-means method in two-dimensional principal-component space.

Functional Principal Component Analysis and Randomized Sparse Clustering Algorithm for Medical Image Analysis

Science.gov (United States)

Lin, Nan; Jiang, Junhai; Guo, Shicheng; Xiong, Momiao

2015-01-01

Due to the advancement in sensor technology, the growing large medical image data have the ability to visualize the anatomical changes in biological tissues. As a consequence, the medical images have the potential to enhance the diagnosis of disease, the prediction of clinical outcomes and the characterization of disease progression. But in the meantime, the growing data dimensions pose great methodological and computational challenges for the representation and selection of features in image cluster analysis. To address these challenges, we first extend the functional principal component analysis (FPCA) from one dimension to two dimensions to fully capture the space variation of image the signals. The image signals contain a large number of redundant features which provide no additional information for clustering analysis. The widely used methods for removing the irrelevant features are sparse clustering algorithms using a lasso-type penalty to select the features. However, the accuracy of clustering using a lasso-type penalty depends on the selection of the penalty parameters and the threshold value. In practice, they are difficult to determine. Recently, randomized algorithms have received a great deal of attentions in big data analysis. This paper presents a randomized algorithm for accurate feature selection in image clustering analysis. The proposed method is applied to both the liver and kidney cancer histology image data from the TCGA database. The results demonstrate that the randomized feature selection method coupled with functional principal component analysis substantially outperforms the current sparse clustering algorithms in image cluster analysis. PMID:26196383

Principal component analysis of NEXAFS spectra for molybdenum speciation in hydrotreating catalysts

International Nuclear Information System (INIS)

Faro Junior, Arnaldo da C.; Rodrigues, Victor de O.; Eon, Jean-G.; Rocha, Angela S.

2010-01-01

Bulk and supported molybdenum based catalysts, modified by nickel, phosphorous or tungsten were studied by NEXAFS spectroscopy at the Mo L III and L II edges. The techniques of principal component analysis (PCA) together with a linear combination analysis (LCA) allowed the detection and quantification of molybdenum atoms in two different coordination states in the oxide form of the catalysts, namely tetrahedral and octahedral coordination. (author)

Competition analysis on the operating system market using principal component analysis

Directory of Open Access Journals (Sweden)

Brătucu, G.

2011-01-01

Full Text Available Operating system market has evolved greatly. The largest software producer in the world, Microsoft, dominates the operating systems segment. With three operating systems: Windows XP, Windows Vista and Windows 7 the company held a market share of 87.54% in January 2011. Over time, open source operating systems have begun to penetrate the market very strongly affecting other manufacturers. Companies such as Apple Inc. and Google Inc. penetrated the operating system market. This paper aims to compare the best-selling operating systems on the market in terms of defining characteristics. To this purpose the principal components analysis method was used.

Principal component analysis and the locus of the Fréchet mean in the space of phylogenetic trees.

Science.gov (United States)

Nye, Tom M W; Tang, Xiaoxian; Weyenberg, Grady; Yoshida, Ruriko

2017-12-01

Evolutionary relationships are represented by phylogenetic trees, and a phylogenetic analysis of gene sequences typically produces a collection of these trees, one for each gene in the analysis. Analysis of samples of trees is difficult due to the multi-dimensionality of the space of possible trees. In Euclidean spaces, principal component analysis is a popular method of reducing high-dimensional data to a low-dimensional representation that preserves much of the sample's structure. However, the space of all phylogenetic trees on a fixed set of species does not form a Euclidean vector space, and methods adapted to tree space are needed. Previous work introduced the notion of a principal geodesic in this space, analogous to the first principal component. Here we propose a geometric object for tree space similar to the [Formula: see text]th principal component in Euclidean space: the locus of the weighted Fréchet mean of [Formula: see text] vertex trees when the weights vary over the [Formula: see text]-simplex. We establish some basic properties of these objects, in particular showing that they have dimension [Formula: see text], and propose algorithms for projection onto these surfaces and for finding the principal locus associated with a sample of trees. Simulation studies demonstrate that these algorithms perform well, and analyses of two datasets, containing Apicomplexa and African coelacanth genomes respectively, reveal important structure from the second principal components.

Principal component regression for crop yield estimation

CERN Document Server

Suryanarayana, T M V

2016-01-01

This book highlights the estimation of crop yield in Central Gujarat, especially with regard to the development of Multiple Regression Models and Principal Component Regression (PCR) models using climatological parameters as independent variables and crop yield as a dependent variable. It subsequently compares the multiple linear regression (MLR) and PCR results, and discusses the significance of PCR for crop yield estimation. In this context, the book also covers Principal Component Analysis (PCA), a statistical procedure used to reduce a number of correlated variables into a smaller number of uncorrelated variables called principal components (PC). This book will be helpful to the students and researchers, starting their works on climate and agriculture, mainly focussing on estimation models. The flow of chapters takes the readers in a smooth path, in understanding climate and weather and impact of climate change, and gradually proceeds towards downscaling techniques and then finally towards development of ...

Principal component and spatial correlation analysis of spectroscopic-imaging data in scanning probe microscopy

International Nuclear Information System (INIS)

Jesse, Stephen; Kalinin, Sergei V

2009-01-01

An approach for the analysis of multi-dimensional, spectroscopic-imaging data based on principal component analysis (PCA) is explored. PCA selects and ranks relevant response components based on variance within the data. It is shown that for examples with small relative variations between spectra, the first few PCA components closely coincide with results obtained using model fitting, and this is achieved at rates approximately four orders of magnitude faster. For cases with strong response variations, PCA allows an effective approach to rapidly process, de-noise, and compress data. The prospects for PCA combined with correlation function analysis of component maps as a universal tool for data analysis and representation in microscopy are discussed.

Principal component analysis of solar flares in the soft X-ray flux

International Nuclear Information System (INIS)

Teuber, D.L.; Reichmann, E.J.; Wilson, R.M.; National Aeronautics and Space Administration, Huntsville, AL

1979-01-01

Principal component analysis is a technique for extracting the salient features from a mass of data. It applies, in particular, to the analysis of nonstationary ensembles. Computational schemes for this task require the evaluation of eigenvalues of matrices. We have used EISPACK Matrix Eigen System Routines on an IBM 360-75 to analyze full-disk proportional-counter data from the X-ray event analyzer (X-REA) which was part of the Skylab ATM/S-056 experiment. Empirical orthogonal functions have been derived for events in the soft X-ray spectrum between 2.5 and 20 A during different time frames between June 1973 and January 1974. Results indicate that approximately 90% of the cumulative power of each analyzed flare is contained in the largest eigenvector. The first two largest eigenvectors are sufficient for an empirical curve-fit through the raw data and a characterization of solar flares in the soft X-ray flux. Power spectra of the two largest eigenvectors reveal a previously reported periodicity of approximately 5 min. Similar signatures were also obtained from flares that are synchronized on maximum pulse-height when subjected to a principal component analysis. (orig.)

Portable XRF and principal component analysis for bill characterization in forensic science

International Nuclear Information System (INIS)

Appoloni, C.R.; Melquiades, F.L.

2014-01-01

Several modern techniques have been applied to prevent counterfeiting of money bills. The objective of this study was to demonstrate the potential of Portable X-ray Fluorescence (PXRF) technique and the multivariate analysis method of Principal Component Analysis (PCA) for classification of bills in order to use it in forensic science. Bills of Dollar, Euro and Real (Brazilian currency) were measured directly at different colored regions, without any previous preparation. Spectra interpretation allowed the identification of Ca, Ti, Fe, Cu, Sr, Y, Zr and Pb. PCA analysis separated the bills in three groups and subgroups among Brazilian currency. In conclusion, the samples were classified according to its origin identifying the elements responsible for differentiation and basic pigment composition. PXRF allied to multivariate discriminate methods is a promising technique for rapid and no destructive identification of false bills in forensic science. - Highlights: • The paper is about a direct method for bills discrimination by EDXRF and principal component analysis. • The bills are analyzed directly, without sample preparation and non destructively. • The results demonstrates that the methodology is feasible and could be applied in forensic science for identification of origin and false banknotes. • The novelty is that portable EDXRF is very fast and efficient for bills characterization

An application of principal component analysis to the clavicle and clavicle fixation devices.

Science.gov (United States)

Daruwalla, Zubin J; Courtis, Patrick; Fitzpatrick, Clare; Fitzpatrick, David; Mullett, Hannan

2010-03-26

Principal component analysis (PCA) enables the building of statistical shape models of bones and joints. This has been used in conjunction with computer assisted surgery in the past. However, PCA of the clavicle has not been performed. Using PCA, we present a novel method that examines the major modes of size and three-dimensional shape variation in male and female clavicles and suggests a method of grouping the clavicle into size and shape categories. Twenty-one high-resolution computerized tomography scans of the clavicle were reconstructed and analyzed using a specifically developed statistical software package. After performing statistical shape analysis, PCA was applied to study the factors that account for anatomical variation. The first principal component representing size accounted for 70.5 percent of anatomical variation. The addition of a further three principal components accounted for almost 87 percent. Using statistical shape analysis, clavicles in males have a greater lateral depth and are longer, wider and thicker than in females. However, the sternal angle in females is larger than in males. PCA confirmed these differences between genders but also noted that men exhibit greater variance and classified clavicles into five morphological groups. This unique approach is the first that standardizes a clavicular orientation. It provides information that is useful to both, the biomedical engineer and clinician. Other applications include implant design with regard to modifying current or designing future clavicle fixation devices. Our findings support the need for further development of clavicle fixation devices and the questioning of whether gender-specific devices are necessary.

Nonlinear Process Fault Diagnosis Based on Serial Principal Component Analysis.

Science.gov (United States)

Deng, Xiaogang; Tian, Xuemin; Chen, Sheng; Harris, Chris J

2018-03-01

Many industrial processes contain both linear and nonlinear parts, and kernel principal component analysis (KPCA), widely used in nonlinear process monitoring, may not offer the most effective means for dealing with these nonlinear processes. This paper proposes a new hybrid linear-nonlinear statistical modeling approach for nonlinear process monitoring by closely integrating linear principal component analysis (PCA) and nonlinear KPCA using a serial model structure, which we refer to as serial PCA (SPCA). Specifically, PCA is first applied to extract PCs as linear features, and to decompose the data into the PC subspace and residual subspace (RS). Then, KPCA is performed in the RS to extract the nonlinear PCs as nonlinear features. Two monitoring statistics are constructed for fault detection, based on both the linear and nonlinear features extracted by the proposed SPCA. To effectively perform fault identification after a fault is detected, an SPCA similarity factor method is built for fault recognition, which fuses both the linear and nonlinear features. Unlike PCA and KPCA, the proposed method takes into account both linear and nonlinear PCs simultaneously, and therefore, it can better exploit the underlying process's structure to enhance fault diagnosis performance. Two case studies involving a simulated nonlinear process and the benchmark Tennessee Eastman process demonstrate that the proposed SPCA approach is more effective than the existing state-of-the-art approach based on KPCA alone, in terms of nonlinear process fault detection and identification.

Principal Component Analysis Based Two-Dimensional (PCA-2D) Correlation Spectroscopy: PCA Denoising for 2D Correlation Spectroscopy

International Nuclear Information System (INIS)

Jung, Young Mee

2003-01-01

Principal component analysis based two-dimensional (PCA-2D) correlation analysis is applied to FTIR spectra of polystyrene/methyl ethyl ketone/toluene solution mixture during the solvent evaporation. Substantial amount of artificial noise were added to the experimental data to demonstrate the practical noise-suppressing benefit of PCA-2D technique. 2D correlation analysis of the reconstructed data matrix from PCA loading vectors and scores successfully extracted only the most important features of synchronicity and asynchronicity without interference from noise or insignificant minor components. 2D correlation spectra constructed with only one principal component yield strictly synchronous response with no discernible a asynchronous features, while those involving at least two or more principal components generated meaningful asynchronous 2D correlation spectra. Deliberate manipulation of the rank of the reconstructed data matrix, by choosing the appropriate number and type of PCs, yields potentially more refined 2D correlation spectra

A Filtering of Incomplete GNSS Position Time Series with Probabilistic Principal Component Analysis

Science.gov (United States)

Gruszczynski, Maciej; Klos, Anna; Bogusz, Janusz

2018-04-01

For the first time, we introduced the probabilistic principal component analysis (pPCA) regarding the spatio-temporal filtering of Global Navigation Satellite System (GNSS) position time series to estimate and remove Common Mode Error (CME) without the interpolation of missing values. We used data from the International GNSS Service (IGS) stations which contributed to the latest International Terrestrial Reference Frame (ITRF2014). The efficiency of the proposed algorithm was tested on the simulated incomplete time series, then CME was estimated for a set of 25 stations located in Central Europe. The newly applied pPCA was compared with previously used algorithms, which showed that this method is capable of resolving the problem of proper spatio-temporal filtering of GNSS time series characterized by different observation time span. We showed, that filtering can be carried out with pPCA method when there exist two time series in the dataset having less than 100 common epoch of observations. The 1st Principal Component (PC) explained more than 36% of the total variance represented by time series residuals' (series with deterministic model removed), what compared to the other PCs variances (less than 8%) means that common signals are significant in GNSS residuals. A clear improvement in the spectral indices of the power-law noise was noticed for the Up component, which is reflected by an average shift towards white noise from - 0.98 to - 0.67 (30%). We observed a significant average reduction in the accuracy of stations' velocity estimated for filtered residuals by 35, 28 and 69% for the North, East, and Up components, respectively. CME series were also subjected to analysis in the context of environmental mass loading influences of the filtering results. Subtraction of the environmental loading models from GNSS residuals provides to reduction of the estimated CME variance by 20 and 65% for horizontal and vertical components, respectively.

Fault feature extraction method based on local mean decomposition Shannon entropy and improved kernel principal component analysis model

Directory of Open Access Journals (Sweden)

Jinlu Sheng

2016-07-01

Full Text Available To effectively extract the typical features of the bearing, a new method that related the local mean decomposition Shannon entropy and improved kernel principal component analysis model was proposed. First, the features are extracted by time–frequency domain method, local mean decomposition, and using the Shannon entropy to process the original separated product functions, so as to get the original features. However, the features been extracted still contain superfluous information; the nonlinear multi-features process technique, kernel principal component analysis, is introduced to fuse the characters. The kernel principal component analysis is improved by the weight factor. The extracted characteristic features were inputted in the Morlet wavelet kernel support vector machine to get the bearing running state classification model, bearing running state was thereby identified. Cases of test and actual were analyzed.

Characterization of reflectance variability in the industrial paint application of automotive metallic coatings by using principal component analysis

Science.gov (United States)

Medina, José M.; Díaz, José A.

2013-05-01

We have applied principal component analysis to examine trial-to-trial variability of reflectances of automotive coatings that contain effect pigments. Reflectance databases were measured from different color batch productions using a multi-angle spectrophotometer. A method to classify the principal components was used based on the eigenvalue spectra. It was found that the eigenvalue spectra follow distinct power laws and depend on the detection angle. The scaling exponent provided an estimation of the correlation between reflectances and it was higher near specular reflection, suggesting a contribution from the deposition of effect pigments. Our findings indicate that principal component analysis can be a useful tool to classify different sources of spectral variability in color engineering.

Longitudinal functional principal component modelling via Stochastic Approximation Monte Carlo

KAUST Repository

Martinez, Josue G.

2010-06-01

The authors consider the analysis of hierarchical longitudinal functional data based upon a functional principal components approach. In contrast to standard frequentist approaches to selecting the number of principal components, the authors do model averaging using a Bayesian formulation. A relatively straightforward reversible jump Markov Chain Monte Carlo formulation has poor mixing properties and in simulated data often becomes trapped at the wrong number of principal components. In order to overcome this, the authors show how to apply Stochastic Approximation Monte Carlo (SAMC) to this problem, a method that has the potential to explore the entire space and does not become trapped in local extrema. The combination of reversible jump methods and SAMC in hierarchical longitudinal functional data is simplified by a polar coordinate representation of the principal components. The approach is easy to implement and does well in simulated data in determining the distribution of the number of principal components, and in terms of its frequentist estimation properties. Empirical applications are also presented.

Assessment of drinking water quality using principal component ...

African Journals Online (AJOL)

Assessment of drinking water quality using principal component analysis and partial least square discriminant analysis: a case study at water treatment plants, ... water and to detect the source of pollution for the most revealing parameters.

Finger crease pattern recognition using Legendre moments and principal component analysis

Science.gov (United States)

Luo, Rongfang; Lin, Tusheng

2007-03-01

The finger joint lines defined as finger creases and its distribution can identify a person. In this paper, we propose a new finger crease pattern recognition method based on Legendre moments and principal component analysis (PCA). After obtaining the region of interest (ROI) for each finger image in the pre-processing stage, Legendre moments under Radon transform are applied to construct a moment feature matrix from the ROI, which greatly decreases the dimensionality of ROI and can represent principal components of the finger creases quite well. Then, an approach to finger crease pattern recognition is designed based on Karhunen-Loeve (K-L) transform. The method applies PCA to a moment feature matrix rather than the original image matrix to achieve the feature vector. The proposed method has been tested on a database of 824 images from 103 individuals using the nearest neighbor classifier. The accuracy up to 98.584% has been obtained when using 4 samples per class for training. The experimental results demonstrate that our proposed approach is feasible and effective in biometrics.

Identifying apple surface defects using principal components analysis and artifical neural networks

Science.gov (United States)

Artificial neural networks and principal components were used to detect surface defects on apples in near-infrared images. Neural networks were trained and tested on sets of principal components derived from columns of pixels from images of apples acquired at two wavelengths (740 nm and 950 nm). I...

A principal components model of soundscape perception.

Science.gov (United States)

Axelsson, Östen; Nilsson, Mats E; Berglund, Birgitta

2010-11-01

There is a need for a model that identifies underlying dimensions of soundscape perception, and which may guide measurement and improvement of soundscape quality. With the purpose to develop such a model, a listening experiment was conducted. One hundred listeners measured 50 excerpts of binaural recordings of urban outdoor soundscapes on 116 attribute scales. The average attribute scale values were subjected to principal components analysis, resulting in three components: Pleasantness, eventfulness, and familiarity, explaining 50, 18 and 6% of the total variance, respectively. The principal-component scores were correlated with physical soundscape properties, including categories of dominant sounds and acoustic variables. Soundscape excerpts dominated by technological sounds were found to be unpleasant, whereas soundscape excerpts dominated by natural sounds were pleasant, and soundscape excerpts dominated by human sounds were eventful. These relationships remained after controlling for the overall soundscape loudness (Zwicker's N(10)), which shows that 'informational' properties are substantial contributors to the perception of soundscape. The proposed principal components model provides a framework for future soundscape research and practice. In particular, it suggests which basic dimensions are necessary to measure, how to measure them by a defined set of attribute scales, and how to promote high-quality soundscapes.

Study of Seasonal Variation in Groundwater Quality of Sagar City (India by Principal Component Analysis

Directory of Open Access Journals (Sweden)

Hemant Pathak

2011-01-01

Full Text Available Groundwater is one of the major resources of the drinking water in Sagar city (India.. In this study 15 sampling station were selected for the investigations on 14 chemical parameters. The work was carried out during different months of the pre-monsoon, monsoon and post-monsoon seasons in June 2009 to June 2010. The multivariate statistics such as principal component and cluster analysis were applied to the datasets to investigate seasonal variations in groundwater quality. Principal axis factoring has been used to observe the mode of association of parameters and their interrelationships, for evaluating water quality. Average value of BOD, COD, ammonia and iron was high during entire study period. Elevated values of BOD and ammonia in monsoon, slightly more value of BOD in post-monsoon, BOD, ammonia and iron in pre-monsoon period reflected contribution on temporal effect on groundwater. Results of principal component analysis evinced that all the parameters equally and significantly contribute to groundwater quality variations. Factor 1 and factor 2 analysis revealed the DO value deteriorate due to organic load (BOD/Ammonia in different seasons. Hierarchical cluster analysis grouped 15 stations into four clusters in monsoon, five clusters in post-monsoon and five clusters in pre-monsoon with similar water quality features. Clustered group at monsoon, post-monsoon and pre-monsoon consisted one station exhibiting significant spatial variation in physicochemical composition. The anthropogenic nitrogenous species, as fallout from modernization activities. The study indicated that the groundwater sufficiently well oxygenated and nutrient-rich in study places.

Enhancement of Jahani (Firouzabad salt dome lithological units, using principal components analysis

Directory of Open Access Journals (Sweden)

Houshang Pourcaseb

2016-04-01

Full Text Available In this study, principal components analysis was used to investigate lithological characteristics of Jahani salt dome, Firouzabad. The spectral curves of rocks in the study area show that the evaporate rocks have the highest reflectance at specified wavelengths. The highest reflection has been seen in gypsum and white salt, while minimal reflection can be observed in the igneous rocks from the region. The results show that PCs have significantly low information. It is clear that PC1 shows more information in the highest variance while PC2 has less information. Regional geological map and field controls show compatibility between the enhanced zones and outcrops in the field.

An application of principal component analysis to the clavicle and clavicle fixation devices

Directory of Open Access Journals (Sweden)

Fitzpatrick David

2010-03-01

Full Text Available Abstract Background Principal component analysis (PCA enables the building of statistical shape models of bones and joints. This has been used in conjunction with computer assisted surgery in the past. However, PCA of the clavicle has not been performed. Using PCA, we present a novel method that examines the major modes of size and three-dimensional shape variation in male and female clavicles and suggests a method of grouping the clavicle into size and shape categories. Materials and methods Twenty-one high-resolution computerized tomography scans of the clavicle were reconstructed and analyzed using a specifically developed statistical software package. After performing statistical shape analysis, PCA was applied to study the factors that account for anatomical variation. Results The first principal component representing size accounted for 70.5 percent of anatomical variation. The addition of a further three principal components accounted for almost 87 percent. Using statistical shape analysis, clavicles in males have a greater lateral depth and are longer, wider and thicker than in females. However, the sternal angle in females is larger than in males. PCA confirmed these differences between genders but also noted that men exhibit greater variance and classified clavicles into five morphological groups. Discussion And Conclusions This unique approach is the first that standardizes a clavicular orientation. It provides information that is useful to both, the biomedical engineer and clinician. Other applications include implant design with regard to modifying current or designing future clavicle fixation devices. Our findings support the need for further development of clavicle fixation devices and the questioning of whether gender-specific devices are necessary.

Tribological Performance Optimization of Electroless Ni-P-W Coating Using Weighted Principal Component Analysis

Directory of Open Access Journals (Sweden)

S. Roy

2013-12-01

Full Text Available The present investigation is an experimental approach to deposit electroless Ni-P-W coating on mild steel substrate and find out the optimum combination of various tribological performances on the basis of minimum friction and wear, using weighted principal component analysis (WPCA. In this study three main tribological parameters are chosen viz. load (A, speed (B and time(C. The responses are coefficient of friction and wear depth. Here Weighted Principal Component Analysis (WPCA method is adopted to convert the multi-responses into single performance index called multiple performance index (MPI and Taguchi L27 orthogonal array is used to design the experiment and to find the optimum combination of tribological parameters for minimum coefficient of friction and wear depth. ANOVA is performed to find the significance of the each tribological process parameters and their interactions. The EDX analysis, SEM and XRD are performed to study the composition and structural aspects.

Modeling the variability of solar radiation data among weather stations by means of principal components analysis

International Nuclear Information System (INIS)

Zarzo, Manuel; Marti, Pau

2011-01-01

Research highlights: →Principal components analysis was applied to R s data recorded at 30 stations. → Four principal components explain 97% of the data variability. → The latent variables can be fitted according to latitude, longitude and altitude. → The PCA approach is more effective for gap infilling than conventional approaches. → The proposed method allows daily R s estimations at locations in the area of study. - Abstract: Measurements of global terrestrial solar radiation (R s ) are commonly recorded in meteorological stations. Daily variability of R s has to be taken into account for the design of photovoltaic systems and energy efficient buildings. Principal components analysis (PCA) was applied to R s data recorded at 30 stations in the Mediterranean coast of Spain. Due to equipment failures and site operation problems, time series of R s often present data gaps or discontinuities. The PCA approach copes with this problem and allows estimation of present and past values by taking advantage of R s records from nearby stations. The gap infilling performance of this methodology is compared with neural networks and alternative conventional approaches. Four principal components explain 66% of the data variability with respect to the average trajectory (97% if non-centered values are considered). A new method based on principal components regression was also developed for R s estimation if previous measurements are not available. By means of multiple linear regression, it was found that the latent variables associated to the four relevant principal components can be fitted according to the latitude, longitude and altitude of the station where data were recorded from. Additional geographical or climatic variables did not increase the predictive goodness-of-fit. The resulting models allow the estimation of daily R s values at any location in the area under study and present higher accuracy than artificial neural networks and some conventional approaches

Integrative sparse principal component analysis of gene expression data.

Science.gov (United States)

Liu, Mengque; Fan, Xinyan; Fang, Kuangnan; Zhang, Qingzhao; Ma, Shuangge

2017-12-01

In the analysis of gene expression data, dimension reduction techniques have been extensively adopted. The most popular one is perhaps the PCA (principal component analysis). To generate more reliable and more interpretable results, the SPCA (sparse PCA) technique has been developed. With the "small sample size, high dimensionality" characteristic of gene expression data, the analysis results generated from a single dataset are often unsatisfactory. Under contexts other than dimension reduction, integrative analysis techniques, which jointly analyze the raw data of multiple independent datasets, have been developed and shown to outperform "classic" meta-analysis and other multidatasets techniques and single-dataset analysis. In this study, we conduct integrative analysis by developing the iSPCA (integrative SPCA) method. iSPCA achieves the selection and estimation of sparse loadings using a group penalty. To take advantage of the similarity across datasets and generate more accurate results, we further impose contrasted penalties. Different penalties are proposed to accommodate different data conditions. Extensive simulations show that iSPCA outperforms the alternatives under a wide spectrum of settings. The analysis of breast cancer and pancreatic cancer data further shows iSPCA's satisfactory performance. © 2017 WILEY PERIODICALS, INC.

Fault detection of flywheel system based on clustering and principal component analysis

Directory of Open Access Journals (Sweden)

Wang Rixin

2015-12-01

Full Text Available Considering the nonlinear, multifunctional properties of double-flywheel with closed-loop control, a two-step method including clustering and principal component analysis is proposed to detect the two faults in the multifunctional flywheels. At the first step of the proposed algorithm, clustering is taken as feature recognition to check the instructions of “integrated power and attitude control” system, such as attitude control, energy storage or energy discharge. These commands will ask the flywheel system to work in different operation modes. Therefore, the relationship of parameters in different operations can define the cluster structure of training data. Ordering points to identify the clustering structure (OPTICS can automatically identify these clusters by the reachability-plot. K-means algorithm can divide the training data into the corresponding operations according to the reachability-plot. Finally, the last step of proposed model is used to define the relationship of parameters in each operation through the principal component analysis (PCA method. Compared with the PCA model, the proposed approach is capable of identifying the new clusters and learning the new behavior of incoming data. The simulation results show that it can effectively detect the faults in the multifunctional flywheels system.

A Novel Double Cluster and Principal Component Analysis-Based Optimization Method for the Orbit Design of Earth Observation Satellites

Directory of Open Access Journals (Sweden)

Yunfeng Dong

2017-01-01

Full Text Available The weighted sum and genetic algorithm-based hybrid method (WSGA-based HM, which has been applied to multiobjective orbit optimizations, is negatively influenced by human factors through the artificial choice of the weight coefficients in weighted sum method and the slow convergence of GA. To address these two problems, a cluster and principal component analysis-based optimization method (CPC-based OM is proposed, in which many candidate orbits are gradually randomly generated until the optimal orbit is obtained using a data mining method, that is, cluster analysis based on principal components. Then, the second cluster analysis of the orbital elements is introduced into CPC-based OM to improve the convergence, developing a novel double cluster and principal component analysis-based optimization method (DCPC-based OM. In DCPC-based OM, the cluster analysis based on principal components has the advantage of reducing the human influences, and the cluster analysis based on six orbital elements can reduce the search space to effectively accelerate convergence. The test results from a multiobjective numerical benchmark function and the orbit design results of an Earth observation satellite show that DCPC-based OM converges more efficiently than WSGA-based HM. And DCPC-based OM, to some degree, reduces the influence of human factors presented in WSGA-based HM.

Characterization of Land Transitions Patterns from Multivariate Time Series Using Seasonal Trend Analysis and Principal Component Analysis

Directory of Open Access Journals (Sweden)

Benoit Parmentier

2014-12-01

Full Text Available Characterizing biophysical changes in land change areas over large regions with short and noisy multivariate time series and multiple temporal parameters remains a challenging task. Most studies focus on detection rather than the characterization, i.e., the manner by which surface state variables are altered by the process of changes. In this study, a procedure is presented to extract and characterize simultaneous temporal changes in MODIS multivariate times series from three surface state variables the Normalized Difference Vegetation Index (NDVI, land surface temperature (LST and albedo (ALB. The analysis involves conducting a seasonal trend analysis (STA to extract three seasonal shape parameters (Amplitude 0, Amplitude 1 and Amplitude 2 and using principal component analysis (PCA to contrast trends in change and no-change areas. We illustrate the method by characterizing trends in burned and unburned pixels in Alaska over the 2001–2009 time period. Findings show consistent and meaningful extraction of temporal patterns related to fire disturbances. The first principal component (PC1 is characterized by a decrease in mean NDVI (Amplitude 0 with a concurrent increase in albedo (the mean and the annual amplitude and an increase in LST annual variability (Amplitude 1. These results provide systematic empirical evidence of surface changes associated with one type of land change, fire disturbances, and suggest that STA with PCA may be used to characterize many other types of land transitions over large landscape areas using multivariate Earth observation time series.

Application of principal component analysis to time series of daily air pollution and mortality

NARCIS (Netherlands)

Quant C; Fischer P; Buringh E; Ameling C; Houthuijs D; Cassee F; MGO

2004-01-01

We investigated whether cause-specific daily mortality can be attributed to specific sources of air pollution. To construct indicators of source-specific air pollution, we applied a principal component analysis (PCA) on routinely collected air pollution data in the Netherlands during the period

The application of principal component analysis to quantify technique in sports.

Science.gov (United States)

Federolf, P; Reid, R; Gilgien, M; Haugen, P; Smith, G

2014-06-01

Analyzing an athlete's "technique," sport scientists often focus on preselected variables that quantify important aspects of movement. In contrast, coaches and practitioners typically describe movements in terms of basic postures and movement components using subjective and qualitative features. A challenge for sport scientists is finding an appropriate quantitative methodology that incorporates the holistic perspective of human observers. Using alpine ski racing as an example, this study explores principal component analysis (PCA) as a mathematical method to decompose a complex movement pattern into its main movement components. Ski racing movements were recorded by determining the three-dimensional coordinates of 26 points on each skier which were subsequently interpreted as a 78-dimensional posture vector at each time point. PCA was then used to determine the mean posture and principal movements (PMk ) carried out by the athletes. The first four PMk contained 95.5 ± 0.5% of the variance in the posture vectors which quantified changes in body inclination, vertical or fore-aft movement of the trunk, and distance between skis. In summary, calculating PMk offered a data-driven, quantitative, and objective method of analyzing human movement that is similar to how human observers such as coaches or ski instructors would describe the movement. © 2012 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Raman spectroscopy combined with principal component analysis and k nearest neighbour analysis for non-invasive detection of colon cancer

Science.gov (United States)

Li, Xiaozhou; Yang, Tianyue; Li, Siqi; Wang, Deli; Song, Youtao; Zhang, Su

2016-03-01

This paper attempts to investigate the feasibility of using Raman spectroscopy for the diagnosis of colon cancer. Serum taken from 75 healthy volunteers, 65 colon cancer patients and 60 post-operation colon cancer patients was measured in this experiment. In the Raman spectra of all three groups, the Raman peaks at 750, 1083, 1165, 1321, 1629 and 1779 cm-1 assigned to nucleic acids, amino acids and chromophores were consistently observed. All of these six Raman peaks were observed to have statistically significant differences between groups. For quantitative analysis, the multivariate statistical techniques of principal component analysis (PCA) and k nearest neighbour analysis (KNN) were utilized to develop diagnostic algorithms for classification. In PCA, several peaks in the principal component (PC) loadings spectra were identified as the major contributors to the PC scores. Some of the peaks in the PC loadings spectra were also reported as characteristic peaks for colon tissues, which implies correlation between peaks in PC loadings spectra and those in the original Raman spectra. KNN was also performed on the obtained PCs, and a diagnostic accuracy of 91.0% and a specificity of 92.6% were achieved.

Raman spectroscopy combined with principal component analysis and k nearest neighbour analysis for non-invasive detection of colon cancer

International Nuclear Information System (INIS)

Li, Xiaozhou; Yang, Tianyue; Wang, Deli; Li, Siqi; Song, Youtao; Zhang, Su

2016-01-01

This paper attempts to investigate the feasibility of using Raman spectroscopy for the diagnosis of colon cancer. Serum taken from 75 healthy volunteers, 65 colon cancer patients and 60 post-operation colon cancer patients was measured in this experiment. In the Raman spectra of all three groups, the Raman peaks at 750, 1083, 1165, 1321, 1629 and 1779 cm −1 assigned to nucleic acids, amino acids and chromophores were consistently observed. All of these six Raman peaks were observed to have statistically significant differences between groups. For quantitative analysis, the multivariate statistical techniques of principal component analysis (PCA) and k nearest neighbour analysis (KNN) were utilized to develop diagnostic algorithms for classification. In PCA, several peaks in the principal component (PC) loadings spectra were identified as the major contributors to the PC scores. Some of the peaks in the PC loadings spectra were also reported as characteristic peaks for colon tissues, which implies correlation between peaks in PC loadings spectra and those in the original Raman spectra. KNN was also performed on the obtained PCs, and a diagnostic accuracy of 91.0% and a specificity of 92.6% were achieved. (paper)

k-t PCA: temporally constrained k-t BLAST reconstruction using principal component analysis

DEFF Research Database (Denmark)

Pedersen, Henrik; Kozerke, Sebastian; Ringgaard, Steffen

2009-01-01

in applications exhibiting a broad range of temporal frequencies such as free-breathing myocardial perfusion imaging. We show that temporal basis functions calculated by subjecting the training data to principal component analysis (PCA) can be used to constrain the reconstruction such that the temporal resolution...... is improved. The presented method is called k-t PCA....

Effects of physiotherapy treatment on knee osteoarthritis gait data using principal component analysis.

Science.gov (United States)

Gaudreault, Nathaly; Mezghani, Neila; Turcot, Katia; Hagemeister, Nicola; Boivin, Karine; de Guise, Jacques A

2011-03-01

Interpreting gait data is challenging due to intersubject variability observed in the gait pattern of both normal and pathological populations. The objective of this study was to investigate the impact of using principal component analysis for grouping knee osteoarthritis (OA) patients' gait data in more homogeneous groups when studying the effect of a physiotherapy treatment. Three-dimensional (3D) knee kinematic and kinetic data were recorded during the gait of 29 participants diagnosed with knee OA before and after they received 12 weeks of physiotherapy treatment. Principal component analysis was applied to extract groups of knee flexion/extension, adduction/abduction and internal/external rotation angle and moment data. The treatment's effect on parameters of interest was assessed using paired t-tests performed before and after grouping the knee kinematic data. Increased quadriceps and hamstring strength was observed following treatment (Pphysiotherapy on gait mechanics of knee osteoarthritis patients may be masked or underestimated if kinematic data are not separated into more homogeneous groups when performing pre- and post-treatment comparisons. Copyright © 2010 Elsevier Ltd. All rights reserved.

Principal component analysis reveals gender-specific predictors of cardiometabolic risk in 6th graders

Directory of Open Access Journals (Sweden)

Peterson Mark D

2012-11-01

Full Text Available Abstract Background The purpose of this study was to determine the sex-specific pattern of pediatric cardiometabolic risk with principal component analysis, using several biological, behavioral and parental variables in a large cohort (n = 2866 of 6th grade students. Methods Cardiometabolic risk components included waist circumference, fasting glucose, blood pressure, plasma triglycerides levels and HDL-cholesterol. Principal components analysis was used to determine the pattern of risk clustering and to derive a continuous aggregate score (MetScore. Stratified risk components and MetScore were analyzed for association with age, body mass index (BMI, cardiorespiratory fitness (CRF, physical activity (PA, and parental factors. Results In both boys and girls, BMI and CRF were associated with multiple risk components, and overall MetScore. Maternal smoking was associated with multiple risk components in girls and boys, as well as MetScore in boys, even after controlling for children’s BMI. Paternal family history of early cardiovascular disease (CVD and parental age were associated with increased blood pressure and MetScore for girls. Children’s PA levels, maternal history of early CVD, and paternal BMI were also indicative for various risk components, but not MetScore. Conclusions Several biological and behavioral factors were independently associated with children’s cardiometabolic disease risk, and thus represent a unique gender-specific risk profile. These data serve to bolster the independent contribution of CRF, PA, and family-oriented healthy lifestyles for improving children’s health.

Influencing Factors of Catering and Food Service Industry Based on Principal Component Analysis

OpenAIRE

Zi Tang

2014-01-01

Scientific analysis of influencing factors is of great importance for the healthy development of catering and food service industry. This study attempts to present a set of critical indicators for evaluating the contribution of influencing factors to catering and food service industry in the particular context of Harbin City, Northeast China. Ten indicators that correlate closely with catering and food service industry were identified and performed by the principal component analysis method u...

Principal Component Analysis to Explore Climatic Variability and Dengue Outbreak in Lahore

Directory of Open Access Journals (Sweden)

Syed Afrozuddin Ahmed

2014-08-01

Full Text Available Normal 0 false false false EN-US X-NONE X-NONE Various studies have reported that global warming causes unstable climate and many serious impact to physical environment and public health. The increasing incidence of dengue incidence is now a priority health issue and become a health burden of Pakistan.  In this study it has been investigated that spatial pattern of environment causes the emergence or increasing rate of dengue fever incidence that effects the population and its health. Principal component analysis is performed for the purpose of finding if there is/are any general environmental factor/structure which could be affected in the emergence of dengue fever cases in Pakistani climate. Principal component is applied to find structure in data for all four periods i.e. 1980 to 2012, 1980 to 1995 and 1996 to 2012.  The first three PCs for the period (1980-2012, 1980-1994, 1995-2012 are almost the same and it represent hot and windy weather. The PC1s of all dengue periods are different to each other. PC2 for all period are same and it is wetness in weather. PC3s are different and it is the combination of wetness and windy weather. PC4s for all period show humid but no rain in weather. For climatic variable only minimum temperature and maximum temperature are significantly correlated with daily dengue cases.  PC1, PC3 and PC4 are highly significantly correlated with daily dengue cases 

Principal component approach in variance component estimation for international sire evaluation

Directory of Open Access Journals (Sweden)

Jakobsen Jette

2011-05-01

Full Text Available Abstract Background The dairy cattle breeding industry is a highly globalized business, which needs internationally comparable and reliable breeding values of sires. The international Bull Evaluation Service, Interbull, was established in 1983 to respond to this need. Currently, Interbull performs multiple-trait across country evaluations (MACE for several traits and breeds in dairy cattle and provides international breeding values to its member countries. Estimating parameters for MACE is challenging since the structure of datasets and conventional use of multiple-trait models easily result in over-parameterized genetic covariance matrices. The number of parameters to be estimated can be reduced by taking into account only the leading principal components of the traits considered. For MACE, this is readily implemented in a random regression model. Methods This article compares two principal component approaches to estimate variance components for MACE using real datasets. The methods tested were a REML approach that directly estimates the genetic principal components (direct PC and the so-called bottom-up REML approach (bottom-up PC, in which traits are sequentially added to the analysis and the statistically significant genetic principal components are retained. Furthermore, this article evaluates the utility of the bottom-up PC approach to determine the appropriate rank of the (covariance matrix. Results Our study demonstrates the usefulness of both approaches and shows that they can be applied to large multi-country models considering all concerned countries simultaneously. These strategies can thus replace the current practice of estimating the covariance components required through a series of analyses involving selected subsets of traits. Our results support the importance of using the appropriate rank in the genetic (covariance matrix. Using too low a rank resulted in biased parameter estimates, whereas too high a rank did not result in

Evaluation of skin melanoma in spectral range 450-950 nm using principal component analysis

Science.gov (United States)

Jakovels, D.; Lihacova, I.; Kuzmina, I.; Spigulis, J.

2013-06-01

Diagnostic potential of principal component analysis (PCA) of multi-spectral imaging data in the wavelength range 450- 950 nm for distant skin melanoma recognition is discussed. Processing of the measured clinical data by means of PCA resulted in clear separation between malignant melanomas and pigmented nevi.

Registration of dynamic dopamine D2receptor images using principal component analysis

International Nuclear Information System (INIS)

Acton, P.D.; Ell, P.J.; Pilowsky, L.S.; Brammer, M.J.; Suckling, J.

1997-01-01

This paper describes a novel technique for registering a dynamic sequence of single-photon emission tomography (SPET) dopamine D 2 receptor images, using principal component analysis (PCA). Conventional methods for registering images, such as count difference and correlation coefficient algorithms, fail to take into account the dynamic nature of the data, resulting in large systematic errors when registering time-varying images. However, by using principal component analysis to extract the temporal structure of the image sequence, misregistration can be quantified by examining the distribution of eigenvalues. The registration procedures were tested using a computer-generated dynamic phantom derived from a high-resolution magnetic resonance image of a realistic brain phantom. Each method was also applied to clinical SPET images of dopamine D 2 receptors, using the ligands iodine-123 iodobenzamide and iodine-123 epidepride, to investigate the influence of misregistration on kinetic modelling parameters and the binding potential. The PCA technique gave highly significant (P 123 I-epidepride scans. The PCA method produced data of much greater quality for subsequent kinetic modelling, with an improvement of nearly 50% in the χ 2 of the fit to the compartmental model, and provided superior quality registration of particularly difficult dynamic sequences. (orig.)

Boundary layer noise subtraction in hydrodynamic tunnel using robust principal component analysis.

Science.gov (United States)

Amailland, Sylvain; Thomas, Jean-Hugh; Pézerat, Charles; Boucheron, Romuald

2018-04-01

The acoustic study of propellers in a hydrodynamic tunnel is of paramount importance during the design process, but can involve significant difficulties due to the boundary layer noise (BLN). Indeed, advanced denoising methods are needed to recover the acoustic signal in case of poor signal-to-noise ratio. The technique proposed in this paper is based on the decomposition of the wall-pressure cross-spectral matrix (CSM) by taking advantage of both the low-rank property of the acoustic CSM and the sparse property of the BLN CSM. Thus, the algorithm belongs to the class of robust principal component analysis (RPCA), which derives from the widely used principal component analysis. If the BLN is spatially decorrelated, the proposed RPCA algorithm can blindly recover the acoustical signals even for negative signal-to-noise ratio. Unfortunately, in a realistic case, acoustic signals recorded in a hydrodynamic tunnel show that the noise may be partially correlated. A prewhitening strategy is then considered in order to take into account the spatially coherent background noise. Numerical simulations and experimental results show an improvement in terms of BLN reduction in the large hydrodynamic tunnel. The effectiveness of the denoising method is also investigated in the context of acoustic source localization.

Classification of calcium supplements through application of principal component analysis: a study by inaa and aas

International Nuclear Information System (INIS)

Waheed, S.; Rahman, S.; Siddique, N.

2013-01-01

Different types of Ca supplements are available in the local markets of Pakistan. It is sometimes difficult to classify these with respect to their composition. In the present work principal component analysis (PCA) technique was applied to classify different Ca supplements on the basis of their elemental data obtained using instrumental neutron activation analysis (INAA) and atomic absorption spectrometry (AAS) techniques. The graphical representation of principal component analysis (PCA) scores utilizing intricate analytical data successfully generated four different types of Ca supplements with compatible samples grouped together. These included Ca supplements with CaCO/sub 3/as Ca source along with vitamin C, the supplements with CaCO/sub 3/ as Ca source along with vitamin D, Supplements with Ca from bone meal and supplements with chelated calcium. (author)

Kernel principal component analysis residual diagnosis (KPCARD): An automated method for cosmic ray artifact removal in Raman spectra

International Nuclear Information System (INIS)

Li, Boyan; Calvet, Amandine; Casamayou-Boucau, Yannick; Ryder, Alan G.

2016-01-01

A new, fully automated, rapid method, referred to as kernel principal component analysis residual diagnosis (KPCARD), is proposed for removing cosmic ray artifacts (CRAs) in Raman spectra, and in particular for large Raman imaging datasets. KPCARD identifies CRAs via a statistical analysis of the residuals obtained at each wavenumber in the spectra. The method utilizes the stochastic nature of CRAs; therefore, the most significant components in principal component analysis (PCA) of large numbers of Raman spectra should not contain any CRAs. The process worked by first implementing kernel PCA (kPCA) on all the Raman mapping data and second accurately estimating the inter- and intra-spectrum noise to generate two threshold values. CRA identification was then achieved by using the threshold values to evaluate the residuals for each spectrum and assess if a CRA was present. CRA correction was achieved by spectral replacement where, the nearest neighbor (NN) spectrum, most spectroscopically similar to the CRA contaminated spectrum and principal components (PCs) obtained by kPCA were both used to generate a robust, best curve fit to the CRA contaminated spectrum. This best fit spectrum then replaced the CRA contaminated spectrum in the dataset. KPCARD efficacy was demonstrated by using simulated data and real Raman spectra collected from solid-state materials. The results showed that KPCARD was fast ( 1 million) Raman datasets. - Highlights: • New rapid, automatable method for cosmic ray artifact correction of Raman spectra. • Uses combination of kernel PCA and noise estimation for artifact identification. • Implements a best fit spectrum replacement correction approach.

Recursive Principal Components Analysis Using Eigenvector Matrix Perturbation

Directory of Open Access Journals (Sweden)

Deniz Erdogmus

2004-10-01

Full Text Available Principal components analysis is an important and well-studied subject in statistics and signal processing. The literature has an abundance of algorithms for solving this problem, where most of these algorithms could be grouped into one of the following three approaches: adaptation based on Hebbian updates and deflation, optimization of a second-order statistical criterion (like reconstruction error or output variance, and fixed point update rules with deflation. In this paper, we take a completely different approach that avoids deflation and the optimization of a cost function using gradients. The proposed method updates the eigenvector and eigenvalue matrices simultaneously with every new sample such that the estimates approximately track their true values as would be calculated from the current sample estimate of the data covariance matrix. The performance of this algorithm is compared with that of traditional methods like Sanger's rule and APEX, as well as a structurally similar matrix perturbation-based method.

Assessment of oil weathering by gas chromatography-mass spectrometry, time warping and principal component analysis

DEFF Research Database (Denmark)

Malmquist, Linus M.V.; Olsen, Rasmus R.; Hansen, Asger B.

2007-01-01

weathering state and to distinguish between various weathering processes is investigated and discussed. The method is based on comprehensive and objective chromatographic data processing followed by principal component analysis (PCA) of concatenated sections of gas chromatography–mass spectrometry...

Fluvial facies reservoir productivity prediction method based on principal component analysis and artificial neural network

Directory of Open Access Journals (Sweden)

Pengyu Gao

2016-03-01

Full Text Available It is difficult to forecast the well productivity because of the complexity of vertical and horizontal developments in fluvial facies reservoir. This paper proposes a method based on Principal Component Analysis and Artificial Neural Network to predict well productivity of fluvial facies reservoir. The method summarizes the statistical reservoir factors and engineering factors that affect the well productivity, extracts information by applying the principal component analysis method and approximates arbitrary functions of the neural network to realize an accurate and efficient prediction on the fluvial facies reservoir well productivity. This method provides an effective way for forecasting the productivity of fluvial facies reservoir which is affected by multi-factors and complex mechanism. The study result shows that this method is a practical, effective, accurate and indirect productivity forecast method and is suitable for field application.

Nonlinear fitness-space-structure adaptation and principal component analysis in genetic algorithms: an application to x-ray reflectivity analysis

International Nuclear Information System (INIS)

Tiilikainen, J; Tilli, J-M; Bosund, V; Mattila, M; Hakkarainen, T; Airaksinen, V-M; Lipsanen, H

2007-01-01

Two novel genetic algorithms implementing principal component analysis and an adaptive nonlinear fitness-space-structure technique are presented and compared with conventional algorithms in x-ray reflectivity analysis. Principal component analysis based on Hessian or interparameter covariance matrices is used to rotate a coordinate frame. The nonlinear adaptation applies nonlinear estimates to reshape the probability distribution of the trial parameters. The simulated x-ray reflectivity of a realistic model of a periodic nanolaminate structure was used as a test case for the fitting algorithms. The novel methods had significantly faster convergence and less stagnation than conventional non-adaptive genetic algorithms. The covariance approach needs no additional curve calculations compared with conventional methods, and it had better convergence properties than the computationally expensive Hessian approach. These new algorithms can also be applied to other fitting problems where tight interparameter dependence is present

Principal Component Analysis-Based Pattern Analysis of Dose-Volume Histograms and Influence on Rectal Toxicity

International Nuclear Information System (INIS)

Soehn, Matthias; Alber, Markus; Yan Di

2007-01-01

Purpose: The variability of dose-volume histogram (DVH) shapes in a patient population can be quantified using principal component analysis (PCA). We applied this to rectal DVHs of prostate cancer patients and investigated the correlation of the PCA parameters with late bleeding. Methods and Materials: PCA was applied to the rectal wall DVHs of 262 patients, who had been treated with a four-field box, conformal adaptive radiotherapy technique. The correlated changes in the DVH pattern were revealed as 'eigenmodes,' which were ordered by their importance to represent data set variability. Each DVH is uniquely characterized by its principal components (PCs). The correlation of the first three PCs and chronic rectal bleeding of Grade 2 or greater was investigated with uni- and multivariate logistic regression analyses. Results: Rectal wall DVHs in four-field conformal RT can primarily be represented by the first two or three PCs, which describe ∼94% or 96% of the DVH shape variability, respectively. The first eigenmode models the total irradiated rectal volume; thus, PC1 correlates to the mean dose. Mode 2 describes the interpatient differences of the relative rectal volume in the two- or four-field overlap region. Mode 3 reveals correlations of volumes with intermediate doses (∼40-45 Gy) and volumes with doses >70 Gy; thus, PC3 is associated with the maximal dose. According to univariate logistic regression analysis, only PC2 correlated significantly with toxicity. However, multivariate logistic regression analysis with the first two or three PCs revealed an increased probability of bleeding for DVHs with more than one large PC. Conclusions: PCA can reveal the correlation structure of DVHs for a patient population as imposed by the treatment technique and provide information about its relationship to toxicity. It proves useful for augmenting normal tissue complication probability modeling approaches

Optimal pattern synthesis for speech recognition based on principal component analysis

Science.gov (United States)

Korsun, O. N.; Poliyev, A. V.

2018-02-01

The algorithm for building an optimal pattern for the purpose of automatic speech recognition, which increases the probability of correct recognition, is developed and presented in this work. The optimal pattern forming is based on the decomposition of an initial pattern to principal components, which enables to reduce the dimension of multi-parameter optimization problem. At the next step the training samples are introduced and the optimal estimates for principal components decomposition coefficients are obtained by a numeric parameter optimization algorithm. Finally, we consider the experiment results that show the improvement in speech recognition introduced by the proposed optimization algorithm.

Principal component analysis of the nonlinear coupling of harmonic modes in heavy-ion collisions

Science.gov (United States)

BoŻek, Piotr

2018-03-01

The principal component analysis of flow correlations in heavy-ion collisions is studied. The correlation matrix of harmonic flow is generalized to correlations involving several different flow vectors. The method can be applied to study the nonlinear coupling between different harmonic modes in a double differential way in transverse momentum or pseudorapidity. The procedure is illustrated with results from the hydrodynamic model applied to Pb + Pb collisions at √{sN N}=2760 GeV. Three examples of generalized correlations matrices in transverse momentum are constructed corresponding to the coupling of v22 and v4, of v2v3 and v5, or of v23,v33 , and v6. The principal component decomposition is applied to the correlation matrices and the dominant modes are calculated.

Clustering of metabolic and cardiovascular risk factors in the polycystic ovary syndrome: a principal component analysis.

Science.gov (United States)

Stuckey, Bronwyn G A; Opie, Nicole; Cussons, Andrea J; Watts, Gerald F; Burke, Valerie

2014-08-01

Polycystic ovary syndrome (PCOS) is a prevalent condition with heterogeneity of clinical features and cardiovascular risk factors that implies multiple aetiological factors and possible outcomes. To reduce a set of correlated variables to a smaller number of uncorrelated and interpretable factors that may delineate subgroups within PCOS or suggest pathogenetic mechanisms. We used principal component analysis (PCA) to examine the endocrine and cardiometabolic variables associated with PCOS defined by the National Institutes of Health (NIH) criteria. Data were retrieved from the database of a single clinical endocrinologist. We included women with PCOS (N = 378) who were not taking the oral contraceptive pill or other sex hormones, lipid lowering medication, metformin or other medication that could influence the variables of interest. PCA was performed retaining those factors with eigenvalues of at least 1.0. Varimax rotation was used to produce interpretable factors. We identified three principal components. In component 1, the dominant variables were homeostatic model assessment (HOMA) index, body mass index (BMI), high density lipoprotein (HDL) cholesterol and sex hormone binding globulin (SHBG); in component 2, systolic blood pressure, low density lipoprotein (LDL) cholesterol and triglycerides; in component 3, total testosterone and LH/FSH ratio. These components explained 37%, 13% and 11% of the variance in the PCOS cohort respectively. Multiple correlated variables from patients with PCOS can be reduced to three uncorrelated components characterised by insulin resistance, dyslipidaemia/hypertension or hyperandrogenaemia. Clustering of risk factors is consistent with different pathogenetic pathways within PCOS and/or differing cardiometabolic outcomes. Copyright © 2014 Elsevier Inc. All rights reserved.

Feature extraction through parallel Probabilistic Principal Component Analysis for heart disease diagnosis

Science.gov (United States)

Shah, Syed Muhammad Saqlain; Batool, Safeera; Khan, Imran; Ashraf, Muhammad Usman; Abbas, Syed Hussnain; Hussain, Syed Adnan

2017-09-01

Automatic diagnosis of human diseases are mostly achieved through decision support systems. The performance of these systems is mainly dependent on the selection of the most relevant features. This becomes harder when the dataset contains missing values for the different features. Probabilistic Principal Component Analysis (PPCA) has reputation to deal with the problem of missing values of attributes. This research presents a methodology which uses the results of medical tests as input, extracts a reduced dimensional feature subset and provides diagnosis of heart disease. The proposed methodology extracts high impact features in new projection by using Probabilistic Principal Component Analysis (PPCA). PPCA extracts projection vectors which contribute in highest covariance and these projection vectors are used to reduce feature dimension. The selection of projection vectors is done through Parallel Analysis (PA). The feature subset with the reduced dimension is provided to radial basis function (RBF) kernel based Support Vector Machines (SVM). The RBF based SVM serves the purpose of classification into two categories i.e., Heart Patient (HP) and Normal Subject (NS). The proposed methodology is evaluated through accuracy, specificity and sensitivity over the three datasets of UCI i.e., Cleveland, Switzerland and Hungarian. The statistical results achieved through the proposed technique are presented in comparison to the existing research showing its impact. The proposed technique achieved an accuracy of 82.18%, 85.82% and 91.30% for Cleveland, Hungarian and Switzerland dataset respectively.

Comparison of common components analysis with principal components analysis and independent components analysis: Application to SPME-GC-MS volatolomic signatures.

Science.gov (United States)

Bouhlel, Jihéne; Jouan-Rimbaud Bouveresse, Delphine; Abouelkaram, Said; Baéza, Elisabeth; Jondreville, Catherine; Travel, Angélique; Ratel, Jérémy; Engel, Erwan; Rutledge, Douglas N

2018-02-01

The aim of this work is to compare a novel exploratory chemometrics method, Common Components Analysis (CCA), with Principal Components Analysis (PCA) and Independent Components Analysis (ICA). CCA consists in adapting the multi-block statistical method known as Common Components and Specific Weights Analysis (CCSWA or ComDim) by applying it to a single data matrix, with one variable per block. As an application, the three methods were applied to SPME-GC-MS volatolomic signatures of livers in an attempt to reveal volatile organic compounds (VOCs) markers of chicken exposure to different types of micropollutants. An application of CCA to the initial SPME-GC-MS data revealed a drift in the sample Scores along CC2, as a function of injection order, probably resulting from time-related evolution in the instrument. This drift was eliminated by orthogonalization of the data set with respect to CC2, and the resulting data are used as the orthogonalized data input into each of the three methods. Since the first step in CCA is to norm-scale all the variables, preliminary data scaling has no effect on the results, so that CCA was applied only to orthogonalized SPME-GC-MS data, while, PCA and ICA were applied to the "orthogonalized", "orthogonalized and Pareto-scaled", and "orthogonalized and autoscaled" data. The comparison showed that PCA results were highly dependent on the scaling of variables, contrary to ICA where the data scaling did not have a strong influence. Nevertheless, for both PCA and ICA the clearest separations of exposed groups were obtained after autoscaling of variables. The main part of this work was to compare the CCA results using the orthogonalized data with those obtained with PCA and ICA applied to orthogonalized and autoscaled variables. The clearest separations of exposed chicken groups were obtained by CCA. CCA Loadings also clearly identified the variables contributing most to the Common Components giving separations. The PCA Loadings did not

Measuring farm sustainability using data envelope analysis with principal components: the case of Wisconsin cranberry.

Science.gov (United States)

Dong, Fengxia; Mitchell, Paul D; Colquhoun, Jed

2015-01-01

Measuring farm sustainability performance is a crucial component for improving agricultural sustainability. While extensive assessments and indicators exist that reflect the different facets of agricultural sustainability, because of the relatively large number of measures and interactions among them, a composite indicator that integrates and aggregates over all variables is particularly useful. This paper describes and empirically evaluates a method for constructing a composite sustainability indicator that individually scores and ranks farm sustainability performance. The method first uses non-negative polychoric principal component analysis to reduce the number of variables, to remove correlation among variables and to transform categorical variables to continuous variables. Next the method applies common-weight data envelope analysis to these principal components to individually score each farm. The method solves weights endogenously and allows identifying important practices in sustainability evaluation. An empirical application to Wisconsin cranberry farms finds heterogeneity in sustainability practice adoption, implying that some farms could adopt relevant practices to improve the overall sustainability performance of the industry. Copyright © 2014 Elsevier Ltd. All rights reserved.

Development of motion image prediction method using principal component analysis

International Nuclear Information System (INIS)

Chhatkuli, Ritu Bhusal; Demachi, Kazuyuki; Kawai, Masaki; Sakakibara, Hiroshi; Kamiaka, Kazuma

2012-01-01

Respiratory motion can induce the limit in the accuracy of area irradiated during lung cancer radiation therapy. Many methods have been introduced to minimize the impact of healthy tissue irradiation due to the lung tumor motion. The purpose of this research is to develop an algorithm for the improvement of image guided radiation therapy by the prediction of motion images. We predict the motion images by using principal component analysis (PCA) and multi-channel singular spectral analysis (MSSA) method. The images/movies were successfully predicted and verified using the developed algorithm. With the proposed prediction method it is possible to forecast the tumor images over the next breathing period. The implementation of this method in real time is believed to be significant for higher level of tumor tracking including the detection of sudden abdominal changes during radiation therapy. (author)

Personality disorders in substance abusers: Validation of the DIP-Q through principal components factor analysis and canonical correlation analysis

Directory of Open Access Journals (Sweden)

Hesse Morten

2005-05-01

Full Text Available Abstract Background Personality disorders are common in substance abusers. Self-report questionnaires that can aid in the assessment of personality disorders are commonly used in assessment, but are rarely validated. Methods The Danish DIP-Q as a measure of co-morbid personality disorders in substance abusers was validated through principal components factor analysis and canonical correlation analysis. A 4 components structure was constructed based on 238 protocols, representing antagonism, neuroticism, introversion and conscientiousness. The structure was compared with (a a 4-factor solution from the DIP-Q in a sample of Swedish drug and alcohol abusers (N = 133, and (b a consensus 4-components solution based on a meta-analysis of published correlation matrices of dimensional personality disorder scales. Results It was found that the 4-factor model of personality was congruent across the Danish and Swedish samples, and showed good congruence with the consensus model. A canonical correlation analysis was conducted on a subset of the Danish sample with staff ratings of pathology. Three factors that correlated highly between the two variable sets were found. These variables were highly similar to the three first factors from the principal components analysis, antagonism, neuroticism and introversion. Conclusion The findings support the validity of the DIP-Q as a measure of DSM-IV personality disorders in substance abusers.

Principal Component Analysis for Normal-Distribution-Valued Symbolic Data.

Science.gov (United States)

Wang, Huiwen; Chen, Meiling; Shi, Xiaojun; Li, Nan

2016-02-01

This paper puts forward a new approach to principal component analysis (PCA) for normal-distribution-valued symbolic data, which has a vast potential of applications in the economic and management field. We derive a full set of numerical characteristics and variance-covariance structure for such data, which forms the foundation for our analytical PCA approach. Our approach is able to use all of the variance information in the original data than the prevailing representative-type approach in the literature which only uses centers, vertices, etc. The paper also provides an accurate approach to constructing the observations in a PC space based on the linear additivity property of normal distribution. The effectiveness of the proposed method is illustrated by simulated numerical experiments. At last, our method is applied to explain the puzzle of risk-return tradeoff in China's stock market.

Automotive Exterior Noise Optimization Using Grey Relational Analysis Coupled with Principal Component Analysis

Science.gov (United States)

Chen, Shuming; Wang, Dengfeng; Liu, Bo

This paper investigates optimization design of the thickness of the sound package performed on a passenger automobile. The major characteristics indexes for performance selected to evaluate the processes are the SPL of the exterior noise and the weight of the sound package, and the corresponding parameters of the sound package are the thickness of the glass wool with aluminum foil for the first layer, the thickness of the glass fiber for the second layer, and the thickness of the PE foam for the third layer. In this paper, the process is fundamentally with multiple performances, thus, the grey relational analysis that utilizes grey relational grade as performance index is especially employed to determine the optimal combination of the thickness of the different layers for the designed sound package. Additionally, in order to evaluate the weighting values corresponding to various performance characteristics, the principal component analysis is used to show their relative importance properly and objectively. The results of the confirmation experiments uncover that grey relational analysis coupled with principal analysis methods can successfully be applied to find the optimal combination of the thickness for each layer of the sound package material. Therefore, the presented method can be an effective tool to improve the vehicle exterior noise and lower the weight of the sound package. In addition, it will also be helpful for other applications in the automotive industry, such as the First Automobile Works in China, Changan Automobile in China, etc.

A Principal Component Analysis of 39 Scientific Impact Measures

Science.gov (United States)

Bollen, Johan; Van de Sompel, Herbert

2009-01-01

Background The impact of scientific publications has traditionally been expressed in terms of citation counts. However, scientific activity has moved online over the past decade. To better capture scientific impact in the digital era, a variety of new impact measures has been proposed on the basis of social network analysis and usage log data. Here we investigate how these new measures relate to each other, and how accurately and completely they express scientific impact. Methodology We performed a principal component analysis of the rankings produced by 39 existing and proposed measures of scholarly impact that were calculated on the basis of both citation and usage log data. Conclusions Our results indicate that the notion of scientific impact is a multi-dimensional construct that can not be adequately measured by any single indicator, although some measures are more suitable than others. The commonly used citation Impact Factor is not positioned at the core of this construct, but at its periphery, and should thus be used with caution. PMID:19562078

A principal component analysis of 39 scientific impact measures.

Directory of Open Access Journals (Sweden)

Johan Bollen

Full Text Available BACKGROUND: The impact of scientific publications has traditionally been expressed in terms of citation counts. However, scientific activity has moved online over the past decade. To better capture scientific impact in the digital era, a variety of new impact measures has been proposed on the basis of social network analysis and usage log data. Here we investigate how these new measures relate to each other, and how accurately and completely they express scientific impact. METHODOLOGY: We performed a principal component analysis of the rankings produced by 39 existing and proposed measures of scholarly impact that were calculated on the basis of both citation and usage log data. CONCLUSIONS: Our results indicate that the notion of scientific impact is a multi-dimensional construct that can not be adequately measured by any single indicator, although some measures are more suitable than others. The commonly used citation Impact Factor is not positioned at the core of this construct, but at its periphery, and should thus be used with caution.

QUANTITATIVE ELECTRONIC STRUCTURE - ACTIVITY RELATIONSHIP OF ANTIMALARIAL COMPOUND OF ARTEMISININ DERIVATIVES USING PRINCIPAL COMPONENT REGRESSION APPROACH

Directory of Open Access Journals (Sweden)

Paul Robert Martin Werfette

2010-06-01

Full Text Available Analysis of quantitative structure - activity relationship (QSAR for a series of antimalarial compound artemisinin derivatives has been done using principal component regression. The descriptors for QSAR study were representation of electronic structure i.e. atomic net charges of the artemisinin skeleton calculated by AM1 semi-empirical method. The antimalarial activity of the compound was expressed in log 1/IC50 which is an experimental data. The main purpose of the principal component analysis approach is to transform a large data set of atomic net charges to simplify into a data set which known as latent variables. The best QSAR equation to analyze of log 1/IC50 can be obtained from the regression method as a linear function of several latent variables i.e. x1, x2, x3, x4 and x5. The best QSAR model is expressed in the following equation,  (;;   Keywords: QSAR, antimalarial, artemisinin, principal component regression

Combined approach based on principal component analysis and canonical discriminant analysis for investigating hyperspectral plant response

Directory of Open Access Journals (Sweden)

Anna Maria Stellacci

2012-07-01

Full Text Available Hyperspectral (HS data represents an extremely powerful means for rapidly detecting crop stress and then aiding in the rational management of natural resources in agriculture. However, large volume of data poses a challenge for data processing and extracting crucial information. Multivariate statistical techniques can play a key role in the analysis of HS data, as they may allow to both eliminate redundant information and identify synthetic indices which maximize differences among levels of stress. In this paper we propose an integrated approach, based on the combined use of Principal Component Analysis (PCA and Canonical Discriminant Analysis (CDA, to investigate HS plant response and discriminate plant status. The approach was preliminary evaluated on a data set collected on durum wheat plants grown under different nitrogen (N stress levels. Hyperspectral measurements were performed at anthesis through a high resolution field spectroradiometer, ASD FieldSpec HandHeld, covering the 325-1075 nm region. Reflectance data were first restricted to the interval 510-1000 nm and then divided into five bands of the electromagnetic spectrum [green: 510-580 nm; yellow: 581-630 nm; red: 631-690 nm; red-edge: 705-770 nm; near-infrared (NIR: 771-1000 nm]. PCA was applied to each spectral interval. CDA was performed on the extracted components to identify the factors maximizing the differences among plants fertilised with increasing N rates. Within the intervals of green, yellow and red only the first principal component (PC had an eigenvalue greater than 1 and explained more than 95% of total variance; within the ranges of red-edge and NIR, the first two PCs had an eigenvalue higher than 1. Two canonical variables explained cumulatively more than 81% of total variance and the first was able to discriminate wheat plants differently fertilised, as confirmed also by the significant correlation with aboveground biomass and grain yield parameters. The combined

Delaunay algorithm and principal component analysis for 3D visualization of mitochondrial DNA nucleoids by Biplane FPALM/dSTORM

Czech Academy of Sciences Publication Activity Database

Alán, Lukáš; Špaček, Tomáš; Ježek, Petr

2016-01-01

Roč. 45, č. 5 (2016), s. 443-461 ISSN 0175-7571 R&D Projects: GA ČR(CZ) GA13-02033S; GA MŠk(CZ) ED1.1.00/02.0109 Institutional support: RVO:67985823 Keywords : 3D object segmentation * Delaunay algorithm * principal component analysis * 3D super-resolution microscopy * nucleoids * mitochondrial DNA replication Subject RIV: BO - Biophysics Impact factor: 1.472, year: 2016

Combined principal component preprocessing and n-tuple neural networks for improved classification

DEFF Research Database (Denmark)

Høskuldsson, Agnar; Linneberg, Christian

2000-01-01

We present a combined principal component analysis/neural network scheme for classification. The data used to illustrate the method consist of spectral fluorescence recordings from seven different production facilities, and the task is to relate an unknown sample to one of these seven factories....... The data are first preprocessed by performing an individual principal component analysis on each of the seven groups of data. The components found are then used for classifying the data, but instead of making a single multiclass classifier, we follow the ideas of turning a multiclass problem into a number...... of two-class problems. For each possible pair of classes we further apply a transformation to the calculated principal components in order to increase the separation between the classes. Finally we apply the so-called n-tuple neural network to the transformed data in order to give the classification...

Neural Network for Principal Component Analysis with Applications in Image Compression

Directory of Open Access Journals (Sweden)

Luminita State

2007-04-01

Full Text Available Classical feature extraction and data projection methods have been extensively investigated in the pattern recognition and exploratory data analysis literature. Feature extraction and multivariate data projection allow avoiding the "curse of dimensionality", improve the generalization ability of classifiers and significantly reduce the computational requirements of pattern classifiers. During the past decade a large number of artificial neural networks and learning algorithms have been proposed for solving feature extraction problems, most of them being adaptive in nature and well-suited for many real environments where adaptive approach is required. Principal Component Analysis, also called Karhunen-Loeve transform is a well-known statistical method for feature extraction, data compression and multivariate data projection and so far it has been broadly used in a large series of signal and image processing, pattern recognition and data analysis applications.

Combination of 1H nuclear magnetic resonance spectroscopy and principal component analysis to evaluate the lipid fluidity of flutamide-encapsulated lipid nanoemulsions.

Science.gov (United States)

Takegami, Shigehiko; Ueyama, Keita; Konishi, Atsuko; Kitade, Tatsuya

2018-06-06

The lipid fluidity of various lipid nanoemulsions (LNEs) without and with flutamide (FT) and containing one of two neutral lipids, one of four phosphatidylcholines as a surfactant, and sodium palmitate as a cosurfactant was investigated by the combination of 1 H nuclear magnetic resonance (NMR) spectroscopy and principal component analysis (PCA). In the 1 H NMR spectra, the peaks from the methylene groups of the neutral lipids and surfactants for all LNE preparations showed downfield shifts with increasing temperature from 20 to 60 °C. PCA was applied to the 1 H NMR spectral data obtained for the LNEs. The PCA resulted in a model in which the first two principal components (PCs) extracted 88% of the total spectral variation; the first PC (PC-1) axis and second PC (PC-2) axis accounted for 73 and 15%, respectively, of the total spectral variation. The Score-1 values for PC-1 plotted against temperature revealed the existence of two clusters, which were defined by the neutral lipid of the LNE preparations. Meanwhile, the Score-2 values decreased with rising temperature and reflected the increase in lipid fluidity of each LNE preparation, consistent with fluorescence anisotropy measurements. In addition, the changes of Score-2 values with temperature for LNE preparations with FT were smaller than those for LNE preparations without FT. This indicates that FT encapsulated in LNE particles markedly suppressed the increase in lipid fluidity of LNE particles with rising temperature. Thus, PCA of 1 H NMR spectra will become a powerful tool to analyze the lipid fluidity of lipid nanoparticles. Graphical abstract ᅟ.

Selecting the Number of Principal Components in Functional Data

KAUST Repository

Li, Yehua

2013-12-01

Functional principal component analysis (FPCA) has become the most widely used dimension reduction tool for functional data analysis. We consider functional data measured at random, subject-specific time points, contaminated with measurement error, allowing for both sparse and dense functional data, and propose novel information criteria to select the number of principal component in such data. We propose a Bayesian information criterion based on marginal modeling that can consistently select the number of principal components for both sparse and dense functional data. For dense functional data, we also develop an Akaike information criterion based on the expected Kullback-Leibler information under a Gaussian assumption. In connecting with the time series literature, we also consider a class of information criteria proposed for factor analysis of multivariate time series and show that they are still consistent for dense functional data, if a prescribed undersmoothing scheme is undertaken in the FPCA algorithm. We perform intensive simulation studies and show that the proposed information criteria vastly outperform existing methods for this type of data. Surprisingly, our empirical evidence shows that our information criteria proposed for dense functional data also perform well for sparse functional data. An empirical example using colon carcinogenesis data is also provided to illustrate the results. Supplementary materials for this article are available online. © 2013 American Statistical Association.

A Principal Component Analysis of Project Management Construction Industry Competencies for the Ghanaian

Directory of Open Access Journals (Sweden)

Rockson Dobgegah

2011-03-01

Full Text Available The study adopts a data reduction technique to examine the presence of any complex structure among a set of project management competency variables. A structured survey questionnaire was administered to 100 project managers to elicit relevant data, and this achieved a relatively high response rate of 54%. After satisfying all the necessary tests of reliability of the survey instrument, sample size adequacy and population matrix, the data was subjected to principal component analysis, resulting in the identification of six new thematic project management competency areas ; and were explained in terms of human resource management and project control; construction innovation and communication; project financial resources management; project risk and quality management; business ethics and; physical resources and procurement management. These knowledge areas now form the basis for lateral project management training requirements in the context of the Ghanaian construction industry. Key contribution of the paper is manifested in the use of the principal component analysis, which has rigorously provided understanding into the complex structure and the relationship between the various knowledge areas. The originality and value of the paper is embedded in the use of contextual-task conceptual knowledge to expound the six uncorrelated empirical utility of the project management competencies.

Application of empirical orthogonal functions or principal component analysis to environmental variability data

International Nuclear Information System (INIS)

Carvajal Escobar, Yesid; Marco Segura, Juan B

2005-01-01

An EOF analysis or principal component analysis (PC) was made for monthly precipitation (1972-1998) using 50 stations, and for monthly rate of flow (1951-2000) at 8 stations in the Valle del Cauca state, Colombia. Previously, we had applied 5 measures in order to verify the convenience of the analysis. These measures were: i) evaluation of significance level of correlation between variables; II) the kaiser-Meyer-Oikin (KMO) test; III) the Bartlett sphericity test; (IV) the measurement of sample adequacy (MSA), and v) the percentage of non-redundant residues with absolute values>0.05. For the selection of the significant PCS in every set of variables we applied seven criteria: the graphical method, the explained variance percentage, the mean root, the tests of Velicer, Bartlett, Broken Stich and the cross validation test. We chose the latter as the best one. It is robust and quantitative. Precipitation stations were divided in three homogeneous groups, applying a hierarchical cluster analysis, which was verified through the geographic method and the discriminate analysis for the first four EOFs of precipitation. There are many advantages to the EOF method: reduction of the dimensionality of multivariate data, calculation of missing data, evaluation and reduction of multi-co linearity, building of homogeneous groups, and detection of outliers. With the first four principal components we can explain 60.34% of the total variance of monthly precipitation for the Valle del Cauca state, and 94% of the total variance for the selected records of rates of flow

A novel normalization method based on principal component analysis to reduce the effect of peak overlaps in two-dimensional correlation spectroscopy

Science.gov (United States)

Wang, Yanwei; Gao, Wenying; Wang, Xiaogong; Yu, Zhiwu

2008-07-01

Two-dimensional correlation spectroscopy (2D-COS) has been widely used to separate overlapped spectroscopic bands. However, band overlap may sometimes cause misleading results in the 2D-COS spectra, especially if one peak is embedded within another peak by the overlap. In this work, we propose a new normalization method, based on principal component analysis (PCA). For each spectrum under discussion, the first principal component of PCA is simply taken as the normalization factor of the spectrum. It is demonstrated that the method works well with simulated dynamic spectra. Successful result has also been obtained from the analysis of an overlapped band in the wavenumber range 1440-1486 cm -1 for the evaporation process of a solution containing behenic acid, methanol, and chloroform.

Variability search in M 31 using principal component analysis and the Hubble Source Catalogue

Science.gov (United States)

Moretti, M. I.; Hatzidimitriou, D.; Karampelas, A.; Sokolovsky, K. V.; Bonanos, A. Z.; Gavras, P.; Yang, M.

2018-06-01

Principal component analysis (PCA) is being extensively used in Astronomy but not yet exhaustively exploited for variability search. The aim of this work is to investigate the effectiveness of using the PCA as a method to search for variable stars in large photometric data sets. We apply PCA to variability indices computed for light curves of 18 152 stars in three fields in M 31 extracted from the Hubble Source Catalogue. The projection of the data into the principal components is used as a stellar variability detection and classification tool, capable of distinguishing between RR Lyrae stars, long-period variables (LPVs) and non-variables. This projection recovered more than 90 per cent of the known variables and revealed 38 previously unknown variable stars (about 30 per cent more), all LPVs except for one object of uncertain variability type. We conclude that this methodology can indeed successfully identify candidate variable stars.

Relationships between Association of Research Libraries (ARL) Statistics and Bibliometric Indicators: A Principal Components Analysis

Science.gov (United States)

Hendrix, Dean

2010-01-01

This study analyzed 2005-2006 Web of Science bibliometric data from institutions belonging to the Association of Research Libraries (ARL) and corresponding ARL statistics to find any associations between indicators from the two data sets. Principal components analysis on 36 variables from 103 universities revealed obvious associations between…

Principal Component and Cluster Analysis as a Tool in the Assessment of Tomato Hybrids and Cultivars

Directory of Open Access Journals (Sweden)

G. Evgenidis

2011-01-01

Full Text Available Determination of germplasm diversity and genetic relationships among breeding materials is an invaluable aid in crop improvement strategies. This study assessed the breeding value of tomato source material. Two commercial hybrids along with an experimental hybrid and four cultivars were assessed with cluster and principal component analyses based on morphophysiological data, yield and quality, stability of performance, heterosis, and combining abilities. The assessment of commercial hybrids revealed a related origin and subsequently does not support the identification of promising offspring in their crossing. The assessment of the cultivars discriminated them according to origin and evolutionary and selection effects. On the Principal Component 1, the largest group with positive loading included, yield components, heterosis, general and specific combining ability, whereas the largest negative loading was obtained by qualitative and descriptive traits. The Principal Component 2 revealed two smaller groups, a positive one with phenotypic traits and a negative one with tolerance to inbreeding. Stability of performance was loaded positively and/or negatively. In conclusion, combing ability, yield components, and heterosis provided a mechanism for ensuring continued improvement in plant selection programs.

BANK CAPITAL AND MACROECONOMIC SHOCKS: A PRINCIPAL COMPONENTS ANALYSIS AND VECTOR ERROR CORRECTION MODEL

Directory of Open Access Journals (Sweden)

Christian NZENGUE PEGNET

2011-07-01

Full Text Available The recent financial turmoil has clearly highlighted the potential role of financial factors on amplification of macroeconomic developments and stressed the importance of analyzing the relationship between banks’ balance sheets and economic activity. This paper assesses the impact of the bank capital channel in the transmission of schocks in Europe on the basis of bank's balance sheet data. The empirical analysis is carried out through a Principal Component Analysis and in a Vector Error Correction Model.

An application of principal component analysis to the clavicle and clavicle fixation devices.

LENUS (Irish Health Repository)

Daruwalla, Zubin J

2010-01-01

Principal component analysis (PCA) enables the building of statistical shape models of bones and joints. This has been used in conjunction with computer assisted surgery in the past. However, PCA of the clavicle has not been performed. Using PCA, we present a novel method that examines the major modes of size and three-dimensional shape variation in male and female clavicles and suggests a method of grouping the clavicle into size and shape categories.

Morphological evaluation of common bean diversity in Bosnia and Herzegovina using the discriminant analysis of principal components (DAPC multivariate method

Directory of Open Access Journals (Sweden)

Grahić Jasmin

2013-01-01

Full Text Available In order to analyze morphological characteristics of locally cultivated common bean landraces from Bosnia and Herzegovina (B&H, thirteen quantitative and qualitative traits of 40 P. vulgaris accessions, collected from four geographical regions (Northwest B&H, Northeast B&H, Central B&H and Sarajevo and maintained at the Gene bank of the Faculty of Agriculture and Food Sciences in Sarajevo, were examined. Principal component analysis (PCA showed that the proportion of variance retained in the first two principal components was 54.35%. The first principal component had high contributing factor loadings from seed width, seed height and seed weight, whilst the second principal component had high contributing factor loadings from the analyzed traits seed per pod and pod length. PCA plot, based on the first two principal components, displayed a high level of variability among the analyzed material. The discriminant analysis of principal components (DAPC created 3 discriminant functions (DF, whereby the first two discriminant functions accounted for 90.4% of the variance retained. Based on the retained DFs, DAPC provided group membership probabilities which showed that 70% of the accessions examined were correctly classified between the geographically defined groups. Based on the taxonomic distance, 40 common bean accessions analyzed in this study formed two major clusters, whereas two accessions Acc304 and Acc307 didn’t group in any of those. Acc360 and Acc362, as well as Acc324 and Acc371 displayed a high level of similarity and are probably the same landrace. The present diversity of Bosnia and Herzegovina’s common been landraces could be useful in future breeding programs.

Zero drift and solid Earth tide extracted from relative gravimetric data with principal component analysis

OpenAIRE

Hongjuan Yu; Jinyun Guo; Jiulong Li; Dapeng Mu; Qiaoli Kong

2015-01-01

Zero drift and solid Earth tide corrections to static relative gravimetric data cannot be ignored. In this paper, a new principal component analysis (PCA) algorithm is presented to extract the zero drift and the solid Earth tide, as signals, from static relative gravimetric data assuming that the components contained in the relative gravimetric data are uncorrelated. Static relative gravity observations from Aug. 15 to Aug. 23, 2014 are used as statistical variables to separate the signal and...

Application of principal component analysis and information fusion technique to detect hotspots in NOAA/AVHRR images of Jharia coalfield, India - article no. 013523

Energy Technology Data Exchange (ETDEWEB)

Gautam, R.S.; Singh, D.; Mittal, A. [Indian Institute of Technology Roorkee, Roorkee (India)

2007-07-01

Present paper proposes an algorithm for hotspot (sub-surface fire) detection in NOAA/AVHRR images in Jharia region of India by employing Principal Component Analysis (PCA) and fusion technique. Proposed technique is very simple to implement and is more adaptive in comparison to thresholding, multi-thresholding and contextual algorithms. The algorithm takes into account the information of AVHRR channels 1, 2, 3, 4 and vegetation indices NDVI and MSAVI for the required purpose. Proposed technique consists of three steps: (1) detection and removal of cloud and water pixels from preprocessed AVHRR image and screening out the noise of channel 3, (2) application of PCA on multi-channel information along with vegetation index information of NOAA/AVHRR image to obtain principal components, and (3) fusion of information obtained from principal component 1 and 2 to classify image pixels as hotspots. Image processing techniques are applied to fuse information in first two principal component images and no absolute threshold is incorporated to specify whether particular pixel belongs to hotspot class or not, hence, proposed method is adaptive in nature and works successfully for most of the AVHRR images with average 87.27% detection accuracy and 0.201% false alarm rate while comparing with ground truth points in Jharia region of India.

Principal components analysis of protein structure ensembles calculated using NMR data

International Nuclear Information System (INIS)

Howe, Peter W.A.

2001-01-01

One important problem when calculating structures of biomolecules from NMR data is distinguishing converged structures from outlier structures. This paper describes how Principal Components Analysis (PCA) has the potential to classify calculated structures automatically, according to correlated structural variation across the population. PCA analysis has the additional advantage that it highlights regions of proteins which are varying across the population. To apply PCA, protein structures have to be reduced in complexity and this paper describes two different representations of protein structures which achieve this. The calculated structures of a 28 amino acid peptide are used to demonstrate the methods. The two different representations of protein structure are shown to give equivalent results, and correct results are obtained even though the ensemble of structures used as an example contains two different protein conformations. The PCA analysis also correctly identifies the structural differences between the two conformations

An application of principal component analysis to the clavicle and clavicle fixation devices

OpenAIRE

Daruwalla, Zubin J; Courtis, Patrick; Fitzpatrick, Clare; Fitzpatrick, David; Mullett, Hannan

2010-01-01

Abstract Background Principal component analysis (PCA) enables the building of statistical shape models of bones and joints. This has been used in conjunction with computer assisted surgery in the past. However, PCA of the clavicle has not been performed. Using PCA, we present a novel method that examines the major modes of size and three-dimensional shape variation in male and female clavicles and suggests a method of grouping the clavicle into size and shape categories. Materials and method...

Factors affecting medication adherence in community-managed patients with hypertension based on the principal component analysis: evidence from Xinjiang, China

Directory of Open Access Journals (Sweden)

Zhang YJ

2018-05-01

Full Text Available Yuji Zhang,* Xiaoju Li,* Lu Mao, Mei Zhang, Ke Li, Yinxia Zheng, Wangfei Cui, Hongpo Yin, Yanli He, Mingxia Jing Department of Public Health, Shihezi University School of Medicine, Shihezi, Xinjiang, China *These authors contributed equally to this work Purpose: The analysis of factors affecting the nonadherence to antihypertensive medications is important in the control of blood pressure among patients with hypertension. The purpose of this study was to assess the relationship between factors and medication adherence in Xinjiang community-managed patients with hypertension based on the principal component analysis.Patients and methods: A total of 1,916 community-managed patients with hypertension, selected randomly through a multi-stage sampling, participated in the survey. Self-designed questionnaires were used to classify the participants as either adherent or nonadherent to their medication regimen. A principal component analysis was used in order to eliminate the correlation between factors. Factors related to nonadherence were analyzed by using a χ2-test and a binary logistic regression model.Results: This study extracted nine common factors, with a cumulative variance contribution rate of 63.6%. Further analysis revealed that the following variables were significantly related to nonadherence: severity of disease, community management, diabetes, and taking traditional medications.Conclusion: Community management plays an important role in improving the patients’ medication-taking behavior. Regular medication regimen instruction and better community management services through community-level have the potential to reduce nonadherence. Mild hypertensive patients should be monitored by community health care providers. Keywords: hypertension, medication adherence, factors, principal component analysis, community management, China

A new methodology based on functional principal component analysis to study postural stability post-stroke.

Science.gov (United States)

Sánchez-Sánchez, M Luz; Belda-Lois, Juan-Manuel; Mena-Del Horno, Silvia; Viosca-Herrero, Enrique; Igual-Camacho, Celedonia; Gisbert-Morant, Beatriz

2018-05-05

A major goal in stroke rehabilitation is the establishment of more effective physical therapy techniques to recover postural stability. Functional Principal Component Analysis provides greater insight into recovery trends. However, when missing values exist, obtaining functional data presents some difficulties. The purpose of this study was to reveal an alternative technique for obtaining the Functional Principal Components without requiring the conversion to functional data beforehand and to investigate this methodology to determine the effect of specific physical therapy techniques in balance recovery trends in elderly subjects with hemiplegia post-stroke. A randomized controlled pilot trial was developed. Thirty inpatients post-stroke were included. Control and target groups were treated with the same conventional physical therapy protocol based on functional criteria, but specific techniques were added to the target group depending on the subjects' functional level. Postural stability during standing was quantified by posturography. The assessments were performed once a month from the moment the participants were able to stand up to six months post-stroke. The target group showed a significant improvement in postural control recovery trend six months after stroke that was not present in the control group. Some of the assessed parameters revealed significant differences between treatment groups (P Functional Principal Component Analysis to be performed when data is scarce. Moreover, it allowed the dynamics of recovery of two different treatment groups to be determined, showing that the techniques added in the target group increased postural stability compared to the base protocol. Copyright © 2018 Elsevier Ltd. All rights reserved.

Mapping ash properties using principal components analysis

Science.gov (United States)

Pereira, Paulo; Brevik, Eric; Cerda, Artemi; Ubeda, Xavier; Novara, Agata; Francos, Marcos; Rodrigo-Comino, Jesus; Bogunovic, Igor; Khaledian, Yones

2017-04-01

In post-fire environments ash has important benefits for soils, such as protection and source of nutrients, crucial for vegetation recuperation (Jordan et al., 2016; Pereira et al., 2015a; 2016a,b). The thickness and distribution of ash are fundamental aspects for soil protection (Cerdà and Doerr, 2008; Pereira et al., 2015b) and the severity at which was produced is important for the type and amount of elements that is released in soil solution (Bodi et al., 2014). Ash is very mobile material, and it is important were it will be deposited. Until the first rainfalls are is very mobile. After it, bind in the soil surface and is harder to erode. Mapping ash properties in the immediate period after fire is complex, since it is constantly moving (Pereira et al., 2015b). However, is an important task, since according the amount and type of ash produced we can identify the degree of soil protection and the nutrients that will be dissolved. The objective of this work is to apply to map ash properties (CaCO3, pH, and select extractable elements) using a principal component analysis (PCA) in the immediate period after the fire. Four days after the fire we established a grid in a 9x27 m area and took ash samples every 3 meters for a total of 40 sampling points (Pereira et al., 2017). The PCA identified 5 different factors. Factor 1 identified high loadings in electrical conductivity, calcium, and magnesium and negative with aluminum and iron, while Factor 3 had high positive loadings in total phosphorous and silica. Factor 3 showed high positive loadings in sodium and potassium, factor 4 high negative loadings in CaCO3 and pH, and factor 5 high loadings in sodium and potassium. The experimental variograms of the extracted factors showed that the Gaussian model was the most precise to model factor 1, the linear to model factor 2 and the wave hole effect to model factor 3, 4 and 5. The maps produced confirm the patternd observed in the experimental variograms. Factor 1 and 2

Extraction of Independent Structural Images for Principal Component Thermography

Directory of Open Access Journals (Sweden)

Dmitry Gavrilov

2018-03-01

Full Text Available Thermography is a powerful tool for non-destructive testing of a wide range of materials. Thermography has a number of approaches differing in both experiment setup and the way the collected data are processed. Among such approaches is the Principal Component Thermography (PCT method, which is based on the statistical processing of raw thermal images collected by thermal camera. The processed images (principal components or empirical orthogonal functions form an orthonormal basis, and often look like a superposition of all possible structural features found in the object under inspection—i.e., surface heating non-uniformity, internal defects and material structure. At the same time, from practical point of view it is desirable to have images representing independent structural features. The work presented in this paper proposes an approach for separation of independent image patterns (archetypes from a set of principal component images. The approach is demonstrated in the application of inspection of composite materials as well as the non-invasive analysis of works of art.

IMPROVED SEARCH OF PRINCIPAL COMPONENT ANALYSIS DATABASES FOR SPECTRO-POLARIMETRIC INVERSION

International Nuclear Information System (INIS)

Casini, R.; Lites, B. W.; Ramos, A. Asensio; Ariste, A. López

2013-01-01

We describe a simple technique for the acceleration of spectro-polarimetric inversions based on principal component analysis (PCA) of Stokes profiles. This technique involves the indexing of the database models based on the sign of the projections (PCA coefficients) of the first few relevant orders of principal components of the four Stokes parameters. In this way, each model in the database can be attributed a distinctive binary number of 2 4n bits, where n is the number of PCA orders used for the indexing. Each of these binary numbers (indices) identifies a group of ''compatible'' models for the inversion of a given set of observed Stokes profiles sharing the same index. The complete set of the binary numbers so constructed evidently determines a partition of the database. The search of the database for the PCA inversion of spectro-polarimetric data can profit greatly from this indexing. In practical cases it becomes possible to approach the ideal acceleration factor of 2 4n as compared to the systematic search of a non-indexed database for a traditional PCA inversion. This indexing method relies on the existence of a physical meaning in the sign of the PCA coefficients of a model. For this reason, the presence of model ambiguities and of spectro-polarimetric noise in the observations limits in practice the number n of relevant PCA orders that can be used for the indexing

Identifikasi Wajah Manusia untuk Sistem Monitoring Kehadiran Perkuliahan menggunakan Ekstraksi Fitur Principal Component Analysis (PCA

Directory of Open Access Journals (Sweden)

Cucu Suhery

2017-04-01

Full Text Available Berbagai sistem monitoring presensi yang ada memiliki kekurangan dan kelebihan masing-masing, dan perlu  untuk terus dikembangkan sehingga memudahkan dalam proses pengolahan datanya. Pada penelitian ini dikembangkan suatu sistem monitoring presensi menggunakan deteksi wajah manusia yang diintegrasikan dengan basis data menggunakan bahasa pemrograman Python dan library opencv. Akuisisi data citra dilakukan dengan ponsel android, kemudian citra tersebut dideteksi dan dipotong sehingga hanya didapat bagian wajah saja.  Deteksi wajah menggunakan metode Haar-Cascade Classifier, kemudian ekstraksi fitur dilakukan menggunakan metode Principal Component Analysis (PCA. Hasil dari PCA diberi label sesuai dengan data manusia yang ada pada basis data. Semua citra yang telah memiliki nilai PCA dan tersimpan di basis data akan dicari kemiripannya dengan citra wajah pada proses pengujian menggunakan metoda Euclidian Distance. Pada penelitian ini basis data yang digunakan yaitu MySQL. Hasil deteksi citra wajah pada proses pelatihan memiliki tingkat keberhasilan 100% dan hasil identifikasi wajah pada proses pengujian memiliki tingkat keberhasilan 90%..   Kata kunci— android, haar-cascade classifier, principal component analysis, euclidian distance, MySQL, sistem monitoring presensi, deteksi wajah

Use of Principal Components Analysis to Explain Controls on Nutrient Fluxes to the Chesapeake Bay

Science.gov (United States)

Rice, K. C.; Mills, A. L.

2017-12-01

The Chesapeake Bay watershed, on the east coast of the United States, encompasses about 166,000-square kilometers (km2) of diverse land use, which includes a mixture of forested, agricultural, and developed land. The watershed is now managed under a Total Daily Maximum Load (TMDL), which requires implementation of management actions by 2025 that are sufficient to reduce nitrogen, phosphorus, and suspended-sediment fluxes to the Chesapeake Bay and restore the bay's water quality. We analyzed nutrient and sediment data along with land-use and climatic variables in nine sub watersheds to better understand the drivers of flux within the watershed and to provide relevant management implications. The nine sub watersheds range in area from 300 to 30,000 km2, and the analysis period was 1985-2014. The 31 variables specific to each sub watershed were highly statistically significantly correlated, so Principal Components Analysis was used to reduce the dimensionality of the dataset. The analysis revealed that about 80% of the variability in the whole dataset can be explained by discharge, flux, and concentration of nutrients and sediment. The first two principal components (PCs) explained about 68% of the total variance. PC1 loaded strongly on discharge and flux, and PC2 loaded on concentration. The PC scores of both PC1 and PC2 varied by season. Subsequent analysis of PC1 scores versus PC2 scores, broken out by sub watershed, revealed management implications. Some of the largest sub watersheds are largely driven by discharge, and consequently large fluxes. In contrast, some of the smaller sub watersheds are more variable in nutrient concentrations than discharge and flux. Our results suggest that, given no change in discharge, a reduction in nutrient flux to the streams in the smaller watersheds could result in a proportionately larger decrease in fluxes of nutrients down the river to the bay, than in the larger watersheds.

Principal Component Surface (2011) for Fish Bay, St. John

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This image represents a 0.3x0.3 meter principal component analysis (PCA) surface for areas inside Fish Bay, St. John in the U.S. Virgin Islands (USVI). It was...

Principal Component Surface (2011) for Coral Bay, St. John

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This image represents a 0.3x0.3 meter principal component analysis (PCA) surface for areas inside Coral Bay, St. John in the U.S. Virgin Islands (USVI). It was...

Characterization of soil chemical properties of strawberry fields using principal component analysis

Directory of Open Access Journals (Sweden)

Gláucia Oliveira Islabão

2013-02-01

Full Text Available One of the largest strawberry-producing municipalities of Rio Grande do Sul (RS is Turuçu, in the South of the State. The strawberry production system adopted by farmers is similar to that used in other regions in Brazil and in the world. The main difference is related to the soil management, which can change the soil chemical properties during the strawberry cycle. This study had the objective of assessing the spatial and temporal distribution of soil fertility parameters using principal component analysis (PCA. Soil sampling was based on topography, dividing the field in three thirds: upper, middle and lower. From each of these thirds, five soil samples were randomly collected in the 0-0.20 m layer, to form a composite sample for each third. Four samples were taken during the strawberry cycle and the following properties were determined: soil organic matter (OM, soil total nitrogen (N, available phosphorus (P and potassium (K, exchangeable calcium (Ca and magnesium (Mg, soil pH (pH, cation exchange capacity (CEC at pH 7.0, soil base (V% and soil aluminum saturation(m%. No spatial variation was observed for any of the studied soil fertility parameters in the strawberry fields and temporal variation was only detected for available K. Phosphorus and K contents were always high or very high from the beginning of the strawberry cycle, while pH values ranged from very low to very high. Principal component analysis allowed the clustering of all strawberry fields based on variables related to soil acidity and organic matter content.

Nonlinear Denoising and Analysis of Neuroimages With Kernel Principal Component Analysis and Pre-Image Estimation

DEFF Research Database (Denmark)

Rasmussen, Peter Mondrup; Abrahamsen, Trine Julie; Madsen, Kristoffer Hougaard

2012-01-01

We investigate the use of kernel principal component analysis (PCA) and the inverse problem known as pre-image estimation in neuroimaging: i) We explore kernel PCA and pre-image estimation as a means for image denoising as part of the image preprocessing pipeline. Evaluation of the denoising...... procedure is performed within a data-driven split-half evaluation framework. ii) We introduce manifold navigation for exploration of a nonlinear data manifold, and illustrate how pre-image estimation can be used to generate brain maps in the continuum between experimentally defined brain states/classes. We...

THE STUDY OF THE CHARACTERIZATION INDICES OF FABRICS BY PRINCIPAL COMPONENT ANALYSIS METHOD

OpenAIRE

HRISTIAN Liliana; OSTAFE Maria Magdalena; BORDEIANU Demetra Lacramioara; APOSTOL Laura Liliana

2017-01-01

The paper was pursued to prioritize the worsted fabrics type, for the manufacture of outerwear products by characterization indeces of fabrics, using the mathematical model of Principal Component Analysis (PCA). There are a number of variables with a certain influence on the quality of fabrics, but some of these variables are more important than others, so it is useful to identify those variables to a better understanding the factors which can lead the improving of the fabrics quality. A s...

Application of time series analysis on molecular dynamics simulations of proteins: a study of different conformational spaces by principal component analysis.

Science.gov (United States)

Alakent, Burak; Doruker, Pemra; Camurdan, Mehmet C

2004-09-08

Time series analysis is applied on the collective coordinates obtained from principal component analysis of independent molecular dynamics simulations of alpha-amylase inhibitor tendamistat and immunity protein of colicin E7 based on the Calpha coordinates history. Even though the principal component directions obtained for each run are considerably different, the dynamics information obtained from these runs are surprisingly similar in terms of time series models and parameters. There are two main differences in the dynamics of the two proteins: the higher density of low frequencies and the larger step sizes for the interminima motions of colicin E7 than those of alpha-amylase inhibitor, which may be attributed to the higher number of residues of colicin E7 and/or the structural differences of the two proteins. The cumulative density function of the low frequencies in each run conforms to the expectations from the normal mode analysis. When different runs of alpha-amylase inhibitor are projected on the same set of eigenvectors, it is found that principal components obtained from a certain conformational region of a protein has a moderate explanation power in other conformational regions and the local minima are similar to a certain extent, while the height of the energy barriers in between the minima significantly change. As a final remark, time series analysis tools are further exploited in this study with the motive of explaining the equilibrium fluctuations of proteins. Copyright 2004 American Institute of Physics

Towards automatic analysis of dynamic radionuclide studies using principal-components factor analysis

International Nuclear Information System (INIS)

Nigran, K.S.; Barber, D.C.

1985-01-01

A method is proposed for automatic analysis of dynamic radionuclide studies using the mathematical technique of principal-components factor analysis. This method is considered as a possible alternative to the conventional manual regions-of-interest method widely used. The method emphasises the importance of introducing a priori information into the analysis about the physiology of at least one of the functional structures in a study. Information is added by using suitable mathematical models to describe the underlying physiological processes. A single physiological factor is extracted representing the particular dynamic structure of interest. Two spaces 'study space, S' and 'theory space, T' are defined in the formation of the concept of intersection of spaces. A one-dimensional intersection space is computed. An example from a dynamic 99 Tcsup(m) DTPA kidney study is used to demonstrate the principle inherent in the method proposed. The method requires no correction for the blood background activity, necessary when processing by the manual method. The careful isolation of the kidney by means of region of interest is not required. The method is therefore less prone to operator influence and can be automated. (author)

Chemical fingerprinting of terpanes and steranes by chromatographic alignment and principal component analysis

International Nuclear Information System (INIS)

Christensen, J.H.; Hansen, A.B.; Andersen, O.

2005-01-01

Biomarkers such as steranes and terpanes are abundant in crude oils, particularly in heavy distillate petroleum products. They are useful for matching highly weathered oil samples when other groups of petroleum hydrocarbons fail to distinguish oil samples. In this study, time warping and principal component analysis (PCA) were applied for oil hydrocarbon fingerprinting based on relative amounts of terpane and sterane isomers analyzed by gas chromatography and mass spectrometry. The 4 principal components were boiling point range, clay content, marine or organic terrestrial matter, and maturity based on differences in the terpane and sterane isomer patterns. This study is an extension of a previous fingerprinting study for identifying the sources of oil spill samples based only on the profiles of sterane isomers. Spill samples from the Baltic Carrier oil spill were correctly identified by inspection of score plots. The interpretation of the loading and score plots offered further chemical information about correlations between changes in the amounts of sterane and terpane isomers. It was concluded that this method is an objective procedure for analyzing chromatograms with more comprehensive data usage compared to other fingerprinting methods. 20 refs., 4 figs

Chemical fingerprinting of terpanes and steranes by chromatographic alignment and principal component analysis

Energy Technology Data Exchange (ETDEWEB)

Christensen, J.H. [Royal Veterinary and Agricultural Univ., Thorvaldsensvej (Denmark). Dept. of Natural Sciences; Hansen, A.B. [National Environmental Research Inst., Roskilde (Denmark). Dept. of Environmental Chemistry and Microbiology; Andersen, O. [Roskilde Univ., Roskilde (Denmark). Dept. of Life Sciences and Chemistry

2005-07-01

Biomarkers such as steranes and terpanes are abundant in crude oils, particularly in heavy distillate petroleum products. They are useful for matching highly weathered oil samples when other groups of petroleum hydrocarbons fail to distinguish oil samples. In this study, time warping and principal component analysis (PCA) were applied for oil hydrocarbon fingerprinting based on relative amounts of terpane and sterane isomers analyzed by gas chromatography and mass spectrometry. The 4 principal components were boiling point range, clay content, marine or organic terrestrial matter, and maturity based on differences in the terpane and sterane isomer patterns. This study is an extension of a previous fingerprinting study for identifying the sources of oil spill samples based only on the profiles of sterane isomers. Spill samples from the Baltic Carrier oil spill were correctly identified by inspection of score plots. The interpretation of the loading and score plots offered further chemical information about correlations between changes in the amounts of sterane and terpane isomers. It was concluded that this method is an objective procedure for analyzing chromatograms with more comprehensive data usage compared to other fingerprinting methods. 20 refs., 4 figs.

Mapping brain activity in gradient-echo functional MRI using principal component analysis

Science.gov (United States)

Khosla, Deepak; Singh, Manbir; Don, Manuel

1997-05-01

The detection of sites of brain activation in functional MRI has been a topic of immense research interest and many technique shave been proposed to this end. Recently, principal component analysis (PCA) has been applied to extract the activated regions and their time course of activation. This method is based on the assumption that the activation is orthogonal to other signal variations such as brain motion, physiological oscillations and other uncorrelated noises. A distinct advantage of this method is that it does not require any knowledge of the time course of the true stimulus paradigm. This technique is well suited to EPI image sequences where the sampling rate is high enough to capture the effects of physiological oscillations. In this work, we propose and apply tow methods that are based on PCA to conventional gradient-echo images and investigate their usefulness as tools to extract reliable information on brain activation. The first method is a conventional technique where a single image sequence with alternating on and off stages is subject to a principal component analysis. The second method is a PCA-based approach called the common spatial factor analysis technique (CSF). As the name suggests, this method relies on common spatial factors between the above fMRI image sequence and a background fMRI. We have applied these methods to identify active brain ares during visual stimulation and motor tasks. The results from these methods are compared to those obtained by using the standard cross-correlation technique. We found good agreement in the areas identified as active across all three techniques. The results suggest that PCA and CSF methods have good potential in detecting the true stimulus correlated changes in the presence of other interfering signals.

Assessing the effect of oil price on world food prices: Application of principal component analysis

International Nuclear Information System (INIS)

Esmaeili, Abdoulkarim; Shokoohi, Zainab

2011-01-01

The objective of this paper is to investigate the co-movement of food prices and the macroeconomic index, especially the oil price, by principal component analysis to further understand the influence of the macroeconomic index on food prices. We examined the food prices of seven major products: eggs, meat, milk, oilseeds, rice, sugar and wheat. The macroeconomic variables studied were crude oil prices, consumer price indexes, food production indexes and GDP around the world between 1961 and 2005. We use the Scree test and the proportion of variance method for determining the optimal number of common factors. The correlation coefficient between the extracted principal component and the macroeconomic index varies between 0.87 for the world GDP and 0.36 for the consumer price index. We find the food production index has the greatest influence on the macroeconomic index and that the oil price index has an influence on the food production index. Consequently, crude oil prices have an indirect effect on food prices. - Research Highlights: →We investigate the co-movement of food prices and the macroeconomic index. →The crude oil price has indirect effect on the world GDP via its impacts on food production index. →The food production index is the source of causation for CPI and GDP is affected by CPI. →The results confirm an indirect effect among oil price, food price principal component.

Geochemical differentiation processes for arc magma of the Sengan volcanic cluster, Northeastern Japan, constrained from principal component analysis

Science.gov (United States)

Ueki, Kenta; Iwamori, Hikaru

2017-10-01

In this study, with a view of understanding the structure of high-dimensional geochemical data and discussing the chemical processes at work in the evolution of arc magmas, we employed principal component analysis (PCA) to evaluate the compositional variations of volcanic rocks from the Sengan volcanic cluster of the Northeastern Japan Arc. We analyzed the trace element compositions of various arc volcanic rocks, sampled from 17 different volcanoes in a volcanic cluster. The PCA results demonstrated that the first three principal components accounted for 86% of the geochemical variation in the magma of the Sengan region. Based on the relationships between the principal components and the major elements, the mass-balance relationships with respect to the contributions of minerals, the composition of plagioclase phenocrysts, geothermal gradient, and seismic velocity structure in the crust, the first, the second, and the third principal components appear to represent magma mixing, crystallizations of olivine/pyroxene, and crystallizations of plagioclase, respectively. These represented 59%, 20%, and 6%, respectively, of the variance in the entire compositional range, indicating that magma mixing accounted for the largest variance in the geochemical variation of the arc magma. Our result indicated that crustal processes dominate the geochemical variation of magma in the Sengan volcanic cluster.

Aerodynamic multi-objective integrated optimization based on principal component analysis

Directory of Open Access Journals (Sweden)

Jiangtao HUANG

2017-08-01

Full Text Available Based on improved multi-objective particle swarm optimization (MOPSO algorithm with principal component analysis (PCA methodology, an efficient high-dimension multi-objective optimization method is proposed, which, as the purpose of this paper, aims to improve the convergence of Pareto front in multi-objective optimization design. The mathematical efficiency, the physical reasonableness and the reliability in dealing with redundant objectives of PCA are verified by typical DTLZ5 test function and multi-objective correlation analysis of supercritical airfoil, and the proposed method is integrated into aircraft multi-disciplinary design (AMDEsign platform, which contains aerodynamics, stealth and structure weight analysis and optimization module. Then the proposed method is used for the multi-point integrated aerodynamic optimization of a wide-body passenger aircraft, in which the redundant objectives identified by PCA are transformed to optimization constraints, and several design methods are compared. The design results illustrate that the strategy used in this paper is sufficient and multi-point design requirements of the passenger aircraft are reached. The visualization level of non-dominant Pareto set is improved by effectively reducing the dimension without losing the primary feature of the problem.

A novel principal component analysis for spatially misaligned multivariate air pollution data.

Science.gov (United States)

Jandarov, Roman A; Sheppard, Lianne A; Sampson, Paul D; Szpiro, Adam A

2017-01-01

We propose novel methods for predictive (sparse) PCA with spatially misaligned data. These methods identify principal component loading vectors that explain as much variability in the observed data as possible, while also ensuring the corresponding principal component scores can be predicted accurately by means of spatial statistics at locations where air pollution measurements are not available. This will make it possible to identify important mixtures of air pollutants and to quantify their health effects in cohort studies, where currently available methods cannot be used. We demonstrate the utility of predictive (sparse) PCA in simulated data and apply the approach to annual averages of particulate matter speciation data from national Environmental Protection Agency (EPA) regulatory monitors.

Pixel-level multisensor image fusion based on matrix completion and robust principal component analysis

Science.gov (United States)

Wang, Zhuozheng; Deller, J. R.; Fleet, Blair D.

2016-01-01

Acquired digital images are often corrupted by a lack of camera focus, faulty illumination, or missing data. An algorithm is presented for fusion of multiple corrupted images of a scene using the lifting wavelet transform. The method employs adaptive fusion arithmetic based on matrix completion and self-adaptive regional variance estimation. Characteristics of the wavelet coefficients are used to adaptively select fusion rules. Robust principal component analysis is applied to low-frequency image components, and regional variance estimation is applied to high-frequency components. Experiments reveal that the method is effective for multifocus, visible-light, and infrared image fusion. Compared with traditional algorithms, the new algorithm not only increases the amount of preserved information and clarity but also improves robustness.

Detecting 3-D rotational motion and extracting target information from the principal component analysis of scatterer range histories

CSIR Research Space (South Africa)

Nel, W

2009-10-01

Full Text Available to estimate the 3-D position of scatterers as a by-product of the analysis. The technique is based on principal component analysis of accurate scatterer range histories and is shown only in simulation. Future research should focus on practical application....

An analytics of electricity consumption characteristics based on principal component analysis

Science.gov (United States)

Feng, Junshu

2018-02-01

Abstract . More detailed analysis of the electricity consumption characteristics can make demand side management (DSM) much more targeted. In this paper, an analytics of electricity consumption characteristics based on principal component analysis (PCA) is given, which the PCA method can be used in to extract the main typical characteristics of electricity consumers. Then, electricity consumption characteristics matrix is designed, which can make a comparison of different typical electricity consumption characteristics between different types of consumers, such as industrial consumers, commercial consumers and residents. In our case study, the electricity consumption has been mainly divided into four characteristics: extreme peak using, peak using, peak-shifting using and others. Moreover, it has been found that industrial consumers shift their peak load often, meanwhile commercial and residential consumers have more peak-time consumption. The conclusions can provide decision support of DSM for the government and power providers.

A Principal Component Analysis of Skills and Competencies Required of Quantity Surveyors: Nigerian Perspective

OpenAIRE

Oluwasuji Dada, Joshua

2014-01-01

The purpose of this paper is to examine the intrinsic relationships among sets of quantity surveyors’ skill and competence variables with a view to reducing them into principal components. The research adopts a data reduction technique using factor analysis statistical technique. A structured questionnaire was administered among major stakeholders in the Nigerian construction industry. The respondents were asked to give rating, on a 5 point Likert scale, on skills and competencies re...

Progress Towards Improved Analysis of TES X-ray Data Using Principal Component Analysis

Science.gov (United States)

Busch, S. E.; Adams, J. S.; Bandler, S. R.; Chervenak, J. A.; Eckart, M. E.; Finkbeiner, F. M.; Fixsen, D. J.; Kelley, R. L.; Kilbourne, C. A.; Lee, S.-J.;

Principal Component Analysis of Process Datasets with Missing Values

Directory of Open Access Journals (Sweden)

Kristen A. Severson

2017-07-01

Full Text Available Datasets with missing values arising from causes such as sensor failure, inconsistent sampling rates, and merging data from different systems are common in the process industry. Methods for handling missing data typically operate during data pre-processing, but can also occur during model building. This article considers missing data within the context of principal component analysis (PCA, which is a method originally developed for complete data that has widespread industrial application in multivariate statistical process control. Due to the prevalence of missing data and the success of PCA for handling complete data, several PCA algorithms that can act on incomplete data have been proposed. Here, algorithms for applying PCA to datasets with missing values are reviewed. A case study is presented to demonstrate the performance of the algorithms and suggestions are made with respect to choosing which algorithm is most appropriate for particular settings. An alternating algorithm based on the singular value decomposition achieved the best results in the majority of test cases involving process datasets.

Laboratory spectroscopy of meteorite samples at UV-vis-NIR wavelengths: Analysis and discrimination by principal components analysis

Science.gov (United States)

Penttilä, Antti; Martikainen, Julia; Gritsevich, Maria; Muinonen, Karri

2018-02-01

Meteorite samples are measured with the University of Helsinki integrating-sphere UV-vis-NIR spectrometer. The resulting spectra of 30 meteorites are compared with selected spectra from the NASA Planetary Data System meteorite spectra database. The spectral measurements are transformed with the principal component analysis, and it is shown that different meteorite types can be distinguished from the transformed data. The motivation is to improve the link between asteroid spectral observations and meteorite spectral measurements.

Portable XRF and principal component analysis for bill characterization in forensic science.

Science.gov (United States)

Appoloni, C R; Melquiades, F L

2014-02-01

Several modern techniques have been applied to prevent counterfeiting of money bills. The objective of this study was to demonstrate the potential of Portable X-ray Fluorescence (PXRF) technique and the multivariate analysis method of Principal Component Analysis (PCA) for classification of bills in order to use it in forensic science. Bills of Dollar, Euro and Real (Brazilian currency) were measured directly at different colored regions, without any previous preparation. Spectra interpretation allowed the identification of Ca, Ti, Fe, Cu, Sr, Y, Zr and Pb. PCA analysis separated the bills in three groups and subgroups among Brazilian currency. In conclusion, the samples were classified according to its origin identifying the elements responsible for differentiation and basic pigment composition. PXRF allied to multivariate discriminate methods is a promising technique for rapid and no destructive identification of false bills in forensic science. Copyright © 2013 Elsevier Ltd. All rights reserved.

Principal components and iterative regression analysis of geophysical series: Application to Sunspot number (1750 2004)

Science.gov (United States)

Nordemann, D. J. R.; Rigozo, N. R.; de Souza Echer, M. P.; Echer, E.

2008-11-01

We present here an implementation of a least squares iterative regression method applied to the sine functions embedded in the principal components extracted from geophysical time series. This method seems to represent a useful improvement for the non-stationary time series periodicity quantitative analysis. The principal components determination followed by the least squares iterative regression method was implemented in an algorithm written in the Scilab (2006) language. The main result of the method is to obtain the set of sine functions embedded in the series analyzed in decreasing order of significance, from the most important ones, likely to represent the physical processes involved in the generation of the series, to the less important ones that represent noise components. Taking into account the need of a deeper knowledge of the Sun's past history and its implication to global climate change, the method was applied to the Sunspot Number series (1750-2004). With the threshold and parameter values used here, the application of the method leads to a total of 441 explicit sine functions, among which 65 were considered as being significant and were used for a reconstruction that gave a normalized mean squared error of 0.146.

Characterization of deep aquifer dynamics using principal component analysis of sequential multilevel data

Directory of Open Access Journals (Sweden)

D. Kurtzman

2012-03-01

Full Text Available Two sequential multilevel profiles were obtained in an observation well opened to a 130-m thick, unconfined, contaminated aquifer in Tel Aviv, Israel. While the general profile characteristics of major ions, trace elements, and volatile organic compounds were maintained in the two sampling campaigns conducted 295 days apart, the vertical locations of high concentration gradients were shifted between the two profiles. Principal component analysis (PCA of the chemical variables resulted in a first principal component which was responsible for ∼60% of the variability, and was highly correlated with depth. PCA revealed three distinct depth-dependent water bodies in both multilevel profiles, which were found to have shifted vertically between the sampling events. This shift cut across a clayey bed which separated the top and intermediate water bodies in the first profile, and was located entirely within the intermediate water body in the second profile. Continuous electrical conductivity monitoring in a packed-off section of the observation well revealed an event in which a distinct water body flowed through the monitored section (v ∼ 150 m yr⁻¹. It was concluded that the observed changes in the profiles result from dominantly lateral flow of water bodies in the aquifer rather than vertical flow. The significance of this study is twofold: (a it demonstrates the utility of sequential multilevel observations from deep wells and the efficacy of PCA for evaluating the data; (b the fact that distinct water bodies of 10 to 100 m vertical and horizontal dimensions flow under contaminated sites, which has implications for monitoring and remediation.

Multi-Trait analysis of growth traits: fitting reduced rank models using principal components for Simmental beef cattle

Directory of Open Access Journals (Sweden)

Rodrigo Reis Mota

2016-09-01

Full Text Available ABSTRACT: The aim of this research was to evaluate the dimensional reduction of additive direct genetic covariance matrices in genetic evaluations of growth traits (range 100-730 days in Simmental cattle using principal components, as well as to estimate (covariance components and genetic parameters. Principal component analyses were conducted for five different models-one full and four reduced-rank models. Models were compared using Akaike information (AIC and Bayesian information (BIC criteria. Variance components and genetic parameters were estimated by restricted maximum likelihood (REML. The AIC and BIC values were similar among models. This indicated that parsimonious models could be used in genetic evaluations in Simmental cattle. The first principal component explained more than 96% of total variance in both models. Heritability estimates were higher for advanced ages and varied from 0.05 (100 days to 0.30 (730 days. Genetic correlation estimates were similar in both models regardless of magnitude and number of principal components. The first principal component was sufficient to explain almost all genetic variance. Furthermore, genetic parameter similarities and lower computational requirements allowed for parsimonious models in genetic evaluations of growth traits in Simmental cattle.

Independent principal component analysis for simulation of soil water content and bulk density in a Canadian Watershed

Directory of Open Access Journals (Sweden)

Alaba Boluwade

2016-09-01

Full Text Available Accurate characterization of soil properties such as soil water content (SWC and bulk density (BD is vital for hydrologic processes and thus, it is importance to estimate θ (water content and ρ (soil bulk density among other soil surface parameters involved in water retention and infiltration, runoff generation and water erosion, etc. The spatial estimation of these soil properties are important in guiding agricultural management decisions. These soil properties vary both in space and time and are correlated. Therefore, it is important to find an efficient and robust technique to simulate spatially correlated variables. Methods such as principal component analysis (PCA and independent component analysis (ICA can be used for the joint simulations of spatially correlated variables, but they are not without their flaws. This study applied a variant of PCA called independent principal component analysis (IPCA that combines the strengths of both PCA and ICA for spatial simulation of SWC and BD using the soil data set from an 11 km2 Castor watershed in southern Quebec, Canada. Diagnostic checks using the histograms and cumulative distribution function (cdf both raw and back transformed simulations show good agreement. Therefore, the results from this study has potential in characterization of water content variability and bulk density variation for precision agriculture.

Geographic distribution of suicide and railway suicide in Belgium, 2008-2013: a principal component analysis.

Science.gov (United States)

Strale, Mathieu; Krysinska, Karolina; Overmeiren, Gaëtan Van; Andriessen, Karl

2017-06-01

This study investigated the geographic distribution of suicide and railway suicide in Belgium over 2008--2013 on local (i.e., district or arrondissement) level. There were differences in the regional distribution of suicide and railway suicides in Belgium over the study period. Principal component analysis identified three groups of correlations among population variables and socio-economic indicators, such as population density, unemployment, and age group distribution, on two components that helped explaining the variance of railway suicide at a local (arrondissement) level. This information is of particular importance to prevent suicides in high-risk areas on the Belgian railway network.

PRINCIPAL COMPONENT ANALYSIS STUDIES OF TURBULENCE IN OPTICALLY THICK GAS

International Nuclear Information System (INIS)

Correia, C.; Medeiros, J. R. De; Lazarian, A.; Burkhart, B.; Pogosyan, D.

2016-01-01

In this work we investigate the sensitivity of principal component analysis (PCA) to the velocity power spectrum in high-opacity regimes of the interstellar medium (ISM). For our analysis we use synthetic position–position–velocity (PPV) cubes of fractional Brownian motion and magnetohydrodynamics (MHD) simulations, post-processed to include radiative transfer effects from CO. We find that PCA analysis is very different from the tools based on the traditional power spectrum of PPV data cubes. Our major finding is that PCA is also sensitive to the phase information of PPV cubes and this allows PCA to detect the changes of the underlying velocity and density spectra at high opacities, where the spectral analysis of the maps provides the universal −3 spectrum in accordance with the predictions of the Lazarian and Pogosyan theory. This makes PCA a potentially valuable tool for studies of turbulence at high opacities, provided that proper gauging of the PCA index is made. However, we found the latter to not be easy, as the PCA results change in an irregular way for data with high sonic Mach numbers. This is in contrast to synthetic Brownian noise data used for velocity and density fields that show monotonic PCA behavior. We attribute this difference to the PCA's sensitivity to Fourier phase information

PRINCIPAL COMPONENT ANALYSIS STUDIES OF TURBULENCE IN OPTICALLY THICK GAS

Energy Technology Data Exchange (ETDEWEB)

Correia, C.; Medeiros, J. R. De [Departamento de Física Teórica e Experimental, Universidade Federal do Rio Grande do Norte, 59072-970, Natal (Brazil); Lazarian, A. [Astronomy Department, University of Wisconsin, Madison, 475 N. Charter St., WI 53711 (United States); Burkhart, B. [Harvard-Smithsonian Center for Astrophysics, 60 Garden St, MS-20, Cambridge, MA 02138 (United States); Pogosyan, D., E-mail: caioftc@dfte.ufrn.br [Canadian Institute for Theoretical Astrophysics, University of Toronto, Toronto, ON (Canada)

2016-02-20

In this work we investigate the sensitivity of principal component analysis (PCA) to the velocity power spectrum in high-opacity regimes of the interstellar medium (ISM). For our analysis we use synthetic position–position–velocity (PPV) cubes of fractional Brownian motion and magnetohydrodynamics (MHD) simulations, post-processed to include radiative transfer effects from CO. We find that PCA analysis is very different from the tools based on the traditional power spectrum of PPV data cubes. Our major finding is that PCA is also sensitive to the phase information of PPV cubes and this allows PCA to detect the changes of the underlying velocity and density spectra at high opacities, where the spectral analysis of the maps provides the universal −3 spectrum in accordance with the predictions of the Lazarian and Pogosyan theory. This makes PCA a potentially valuable tool for studies of turbulence at high opacities, provided that proper gauging of the PCA index is made. However, we found the latter to not be easy, as the PCA results change in an irregular way for data with high sonic Mach numbers. This is in contrast to synthetic Brownian noise data used for velocity and density fields that show monotonic PCA behavior. We attribute this difference to the PCA's sensitivity to Fourier phase information.

Preliminary study of soil permeability properties using principal component analysis

Science.gov (United States)

Yulianti, M.; Sudriani, Y.; Rustini, H. A.

2018-02-01

Soil permeability measurement is undoubtedly important in carrying out soil-water research such as rainfall-runoff modelling, irrigation water distribution systems, etc. It is also known that acquiring reliable soil permeability data is rather laborious, time-consuming, and costly. Therefore, it is desirable to develop the prediction model. Several studies of empirical equations for predicting permeability have been undertaken by many researchers. These studies derived the models from areas which soil characteristics are different from Indonesian soil, which suggest a possibility that these permeability models are site-specific. The purpose of this study is to identify which soil parameters correspond strongly to soil permeability and propose a preliminary model for permeability prediction. Principal component analysis (PCA) was applied to 16 parameters analysed from 37 sites consist of 91 samples obtained from Batanghari Watershed. Findings indicated five variables that have strong correlation with soil permeability, and we recommend a preliminary permeability model, which is potential for further development.

Kernel Principal Component Analysis and its Applications in Face Recognition and Active Shape Models

OpenAIRE

Wang, Quan

2012-01-01

Principal component analysis (PCA) is a popular tool for linear dimensionality reduction and feature extraction. Kernel PCA is the nonlinear form of PCA, which better exploits the complicated spatial structure of high-dimensional features. In this paper, we first review the basic ideas of PCA and kernel PCA. Then we focus on the reconstruction of pre-images for kernel PCA. We also give an introduction on how PCA is used in active shape models (ASMs), and discuss how kernel PCA can be applied ...

[Determination of the Plant Origin of Licorice Oil Extract, a Natural Food Additive, by Principal Component Analysis Based on Chemical Components].

Science.gov (United States)

Tada, Atsuko; Ishizuki, Kyoko; Sugimoto, Naoki; Yoshimatsu, Kayo; Kawahara, Nobuo; Suematsu, Takako; Arifuku, Kazunori; Fukai, Toshio; Tamura, Yukiyoshi; Ohtsuki, Takashi; Tahara, Maiko; Yamazaki, Takeshi; Akiyama, Hiroshi

2015-01-01

"Licorice oil extract" (LOE) (antioxidant agent) is described in the notice of Japanese food additive regulations as a material obtained from the roots and/or rhizomes of Glycyrrhiza uralensis, G. inflata or G. glabra. In this study, we aimed to identify the original Glycyrrhiza species of eight food additive products using LC/MS. Glabridin, a characteristic compound in G. glabra, was specifically detected in seven products, and licochalcone A, a characteristic compound in G. inflata, was detected in one product. In addition, Principal Component Analysis (PCA) (a kind of multivariate analysis) using the data of LC/MS or (1)H-NMR analysis was performed. The data of thirty-one samples, including LOE products used as food additives, ethanol extracts of various Glycyrrhiza species and commercially available Glycyrrhiza species-derived products were assessed. Based on the PCA results, the majority of LOE products was confirmed to be derived from G. glabra. This study suggests that PCA using (1)H-NMR analysis data is a simple and useful method to identify the plant species of origin of natural food additive products.

Registration of dynamic dopamine D{sub 2}receptor images using principal component analysis

Energy Technology Data Exchange (ETDEWEB)

Acton, P.D.; Ell, P.J. [Institute of Nuclear Medicine, University College London Medical School, London (United Kingdom); Pilowsky, L.S.; Brammer, M.J. [Institute of Psychiatry, De Crespigny Park, London (United Kingdom); Suckling, J. [Clinical Age Research Unit, Kings College School of Medicine and Dentistry, London (United Kingdom)

1997-11-01

This paper describes a novel technique for registering a dynamic sequence of single-photon emission tomography (SPET) dopamine D{sub 2}receptor images, using principal component analysis (PCA). Conventional methods for registering images, such as count difference and correlation coefficient algorithms, fail to take into account the dynamic nature of the data, resulting in large systematic errors when registering time-varying images. However, by using principal component analysis to extract the temporal structure of the image sequence, misregistration can be quantified by examining the distribution of eigenvalues. The registration procedures were tested using a computer-generated dynamic phantom derived from a high-resolution magnetic resonance image of a realistic brain phantom. Each method was also applied to clinical SPET images of dopamine D {sub 2}receptors, using the ligands iodine-123 iodobenzamide and iodine-123 epidepride, to investigate the influence of misregistration on kinetic modelling parameters and the binding potential. The PCA technique gave highly significant (P <0.001) improvements in image registration, leading to alignment errors in x and y of about 25% of the alternative methods, with reductions in autocorrelations over time. It could also be applied to align image sequences which the other methods failed completely to register, particularly {sup 123}I-epidepride scans. The PCA method produced data of much greater quality for subsequent kinetic modelling, with an improvement of nearly 50% in the {chi}{sup 2}of the fit to the compartmental model, and provided superior quality registration of particularly difficult dynamic sequences. (orig.) With 4 figs., 2 tabs., 26 refs.

Artificial neural network combined with principal component analysis for resolution of complex pharmaceutical formulations.

Science.gov (United States)

Ioele, Giuseppina; De Luca, Michele; Dinç, Erdal; Oliverio, Filomena; Ragno, Gaetano

2011-01-01

A chemometric approach based on the combined use of the principal component analysis (PCA) and artificial neural network (ANN) was developed for the multicomponent determination of caffeine (CAF), mepyramine (MEP), phenylpropanolamine (PPA) and pheniramine (PNA) in their pharmaceutical preparations without any chemical separation. The predictive ability of the ANN method was compared with the classical linear regression method Partial Least Squares 2 (PLS2). The UV spectral data between 220 and 300 nm of a training set of sixteen quaternary mixtures were processed by PCA to reduce the dimensions of input data and eliminate the noise coming from instrumentation. Several spectral ranges and different numbers of principal components (PCs) were tested to find the PCA-ANN and PLS2 models reaching the best determination results. A two layer ANN, using the first four PCs, was used with log-sigmoid transfer function in first hidden layer and linear transfer function in output layer. Standard error of prediction (SEP) was adopted to assess the predictive accuracy of the models when subjected to external validation. PCA-ANN showed better prediction ability in the determination of PPA and PNA in synthetic samples with added excipients and pharmaceutical formulations. Since both components are characterized by low absorptivity, the better performance of PCA-ANN was ascribed to the ability in considering all non-linear information from noise or interfering excipients.

Application of Principal Component Analysis in Prompt Gamma Spectra for Material Sorting

Energy Technology Data Exchange (ETDEWEB)

Im, Hee Jung; Lee, Yun Hee; Song, Byoung Chul; Park, Yong Joon; Kim, Won Ho

2006-11-15

For the detection of illicit materials in a very short time by comparing unknown samples' gamma spectra to pre-programmed material signatures, we at first, selected a method to reduce the noise of the obtained gamma spectra. After a noise reduction, a pattern recognition technique was applied to discriminate the illicit materials from the innocuous materials in the noise reduced data. Principal component analysis was applied for a noise reduction and pattern recognition in prompt gamma spectra. A computer program for the detection of illicit materials based on PCA method was developed in our lab and can be applied to the PGNAA system for the baggage checking at all ports of entry at a very short time.

INCREMENTAL PRINCIPAL COMPONENT ANALYSIS BASED OUTLIER DETECTION METHODS FOR SPATIOTEMPORAL DATA STREAMS

Directory of Open Access Journals (Sweden)

A. Bhushan

2015-07-01

Full Text Available In this paper, we address outliers in spatiotemporal data streams obtained from sensors placed across geographically distributed locations. Outliers may appear in such sensor data due to various reasons such as instrumental error and environmental change. Real-time detection of these outliers is essential to prevent propagation of errors in subsequent analyses and results. Incremental Principal Component Analysis (IPCA is one possible approach for detecting outliers in such type of spatiotemporal data streams. IPCA has been widely used in many real-time applications such as credit card fraud detection, pattern recognition, and image analysis. However, the suitability of applying IPCA for outlier detection in spatiotemporal data streams is unknown and needs to be investigated. To fill this research gap, this paper contributes by presenting two new IPCA-based outlier detection methods and performing a comparative analysis with the existing IPCA-based outlier detection methods to assess their suitability for spatiotemporal sensor data streams.

Principal component analysis and neurocomputing-based models for total ozone concentration over different urban regions of India

Science.gov (United States)

Chattopadhyay, Goutami; Chattopadhyay, Surajit; Chakraborthy, Parthasarathi

2012-07-01

The present study deals with daily total ozone concentration time series over four metro cities of India namely Kolkata, Mumbai, Chennai, and New Delhi in the multivariate environment. Using the Kaiser-Meyer-Olkin measure, it is established that the data set under consideration are suitable for principal component analysis. Subsequently, by introducing rotated component matrix for the principal components, the predictors suitable for generating artificial neural network (ANN) for daily total ozone prediction are identified. The multicollinearity is removed in this way. Models of ANN in the form of multilayer perceptron trained through backpropagation learning are generated for all of the study zones, and the model outcomes are assessed statistically. Measuring various statistics like Pearson correlation coefficients, Willmott's indices, percentage errors of prediction, and mean absolute errors, it is observed that for Mumbai and Kolkata the proposed ANN model generates very good predictions. The results are supported by the linearly distributed coordinates in the scatterplots.

Linearization of the Principal Component Analysis method for radiative transfer acceleration: Application to retrieval algorithms and sensitivity studies

International Nuclear Information System (INIS)

Spurr, R.; Natraj, V.; Lerot, C.; Van Roozendael, M.; Loyola, D.

2013-01-01

Principal Component Analysis (PCA) is a promising tool for enhancing radiative transfer (RT) performance. When applied to binned optical property data sets, PCA exploits redundancy in the optical data, and restricts the number of full multiple-scatter calculations to those optical states corresponding to the most important principal components, yet still maintaining high accuracy in the radiance approximations. We show that the entire PCA RT enhancement process is analytically differentiable with respect to any atmospheric or surface parameter, thus allowing for accurate and fast approximations of Jacobian matrices, in addition to radiances. This linearization greatly extends the power and scope of the PCA method to many remote sensing retrieval applications and sensitivity studies. In the first example, we examine accuracy for PCA-derived UV-backscatter radiance and Jacobian fields over a 290–340 nm window. In a second application, we show that performance for UV-based total ozone column retrieval is considerably improved without compromising the accuracy. -- Highlights: •Principal Component Analysis (PCA) of spectrally-binned atmospheric optical properties. •PCA-based accelerated radiative transfer with 2-stream model for fast multiple-scatter. •Atmospheric and surface property linearization of this PCA performance enhancement. •Accuracy of PCA enhancement for radiances and bulk-property Jacobians, 290–340 nm. •Application of PCA speed enhancement to UV backscatter total ozone retrievals

Characterization of Type Ia Supernova Light Curves Using Principal Component Analysis of Sparse Functional Data

Science.gov (United States)

He, Shiyuan; Wang, Lifan; Huang, Jianhua Z.

2018-04-01

With growing data from ongoing and future supernova surveys, it is possible to empirically quantify the shapes of SNIa light curves in more detail, and to quantitatively relate the shape parameters with the intrinsic properties of SNIa. Building such relationships is critical in controlling systematic errors associated with supernova cosmology. Based on a collection of well-observed SNIa samples accumulated in the past years, we construct an empirical SNIa light curve model using a statistical method called the functional principal component analysis (FPCA) for sparse and irregularly sampled functional data. Using this method, the entire light curve of an SNIa is represented by a linear combination of principal component functions, and the SNIa is represented by a few numbers called “principal component scores.” These scores are used to establish relations between light curve shapes and physical quantities such as intrinsic color, interstellar dust reddening, spectral line strength, and spectral classes. These relations allow for descriptions of some critical physical quantities based purely on light curve shape parameters. Our study shows that some important spectral feature information is being encoded in the broad band light curves; for instance, we find that the light curve shapes are correlated with the velocity and velocity gradient of the Si II λ6355 line. This is important for supernova surveys (e.g., LSST and WFIRST). Moreover, the FPCA light curve model is used to construct the entire light curve shape, which in turn is used in a functional linear form to adjust intrinsic luminosity when fitting distance models.

A stock market forecasting model combining two-directional two-dimensional principal component analysis and radial basis function neural network.

Science.gov (United States)

Guo, Zhiqiang; Wang, Huaiqing; Yang, Jie; Miller, David J

2015-01-01

In this paper, we propose and implement a hybrid model combining two-directional two-dimensional principal component analysis ((2D)2PCA) and a Radial Basis Function Neural Network (RBFNN) to forecast stock market behavior. First, 36 stock market technical variables are selected as the input features, and a sliding window is used to obtain the input data of the model. Next, (2D)2PCA is utilized to reduce the dimension of the data and extract its intrinsic features. Finally, an RBFNN accepts the data processed by (2D)2PCA to forecast the next day's stock price or movement. The proposed model is used on the Shanghai stock market index, and the experiments show that the model achieves a good level of fitness. The proposed model is then compared with one that uses the traditional dimension reduction method principal component analysis (PCA) and independent component analysis (ICA). The empirical results show that the proposed model outperforms the PCA-based model, as well as alternative models based on ICA and on the multilayer perceptron.

Statistical techniques applied to aerial radiometric surveys (STAARS): principal components analysis user's manual

International Nuclear Information System (INIS)

Koch, C.D.; Pirkle, F.L.; Schmidt, J.S.

1981-01-01

A Principal Components Analysis (PCA) has been written to aid in the interpretation of multivariate aerial radiometric data collected by the US Department of Energy (DOE) under the National Uranium Resource Evaluation (NURE) program. The variations exhibited by these data have been reduced and classified into a number of linear combinations by using the PCA program. The PCA program then generates histograms and outlier maps of the individual variates. Black and white plots can be made on a Calcomp plotter by the application of follow-up programs. All programs referred to in this guide were written for a DEC-10. From this analysis a geologist may begin to interpret the data structure. Insight into geological processes underlying the data may be obtained

A feasibility study on age-related factors of wrist pulse using principal component analysis.

Science.gov (United States)

Jang-Han Bae; Young Ju Jeon; Sanghun Lee; Jaeuk U Kim

2016-08-01

Various analysis methods for examining wrist pulse characteristics are needed for accurate pulse diagnosis. In this feasibility study, principal component analysis (PCA) was performed to observe age-related factors of wrist pulse from various analysis parameters. Forty subjects in the age group of 20s and 40s were participated, and their wrist pulse signal and respiration signal were acquired with the pulse tonometric device. After pre-processing of the signals, twenty analysis parameters which have been regarded as values reflecting pulse characteristics were calculated and PCA was performed. As a results, we could reduce complex parameters to lower dimension and age-related factors of wrist pulse were observed by combining-new analysis parameter derived from PCA. These results demonstrate that PCA can be useful tool for analyzing wrist pulse signal.

Use of principal component analysis in the evaluation of adherence to statin treatment: a method to determine a potential target population for public health intervention.

Science.gov (United States)

Latry, Philippe; Martin-Latry, Karin; Labat, Anne; Molimard, Mathieu; Peter, Claude

2011-08-01

The prevalence of statin use is high but adherence low. For public health intervention to be rational, subpopulations of nonadherent subjects must be defined. To categorise statin users with respect to patterns of reimbursement, this study was performed using the main French health reimbursement database for the Aquitaine region of south-western France. The cohort included subjects who submitted a reimbursement for at least one delivery of a statin (index) during the inclusion period (1st of September 2004-31st of December 2004). Indicators of adherence from reimbursement data were considered for principal component analysis. The 119,570 subjects included and analysed had a sex ratio of 1.1, mean (SD) age of 65.9 (11.9), and 13% were considered incident statin users. Principal component analysis found three dimensions that explained 67% of the variance. Using a K-means classification combined with a hierarchical ascendant classification, six groups were characterised. One group was considered nonadherent (10% of study population) and one group least adherent (1%). This novel application of principal component analysis identified groups that may be potential targets for intervention. The least adherent group appears to be one of the most appropriate because of both its relatively small size for case review with prescribing physicians and its very poor adherence. © 2010 The Authors Fundamental and Clinical Pharmacology © 2010 Société Française de Pharmacologie et de Thérapeutique.

Structured Sparse Principal Components Analysis With the TV-Elastic Net Penalty.

Science.gov (United States)

de Pierrefeu, Amicie; Lofstedt, Tommy; Hadj-Selem, Fouad; Dubois, Mathieu; Jardri, Renaud; Fovet, Thomas; Ciuciu, Philippe; Frouin, Vincent; Duchesnay, Edouard

2018-02-01

Principal component analysis (PCA) is an exploratory tool widely used in data analysis to uncover the dominant patterns of variability within a population. Despite its ability to represent a data set in a low-dimensional space, PCA's interpretability remains limited. Indeed, the components produced by PCA are often noisy or exhibit no visually meaningful patterns. Furthermore, the fact that the components are usually non-sparse may also impede interpretation, unless arbitrary thresholding is applied. However, in neuroimaging, it is essential to uncover clinically interpretable phenotypic markers that would account for the main variability in the brain images of a population. Recently, some alternatives to the standard PCA approach, such as sparse PCA (SPCA), have been proposed, their aim being to limit the density of the components. Nonetheless, sparsity alone does not entirely solve the interpretability problem in neuroimaging, since it may yield scattered and unstable components. We hypothesized that the incorporation of prior information regarding the structure of the data may lead to improved relevance and interpretability of brain patterns. We therefore present a simple extension of the popular PCA framework that adds structured sparsity penalties on the loading vectors in order to identify the few stable regions in the brain images that capture most of the variability. Such structured sparsity can be obtained by combining, e.g., and total variation (TV) penalties, where the TV regularization encodes information on the underlying structure of the data. This paper presents the structured SPCA (denoted SPCA-TV) optimization framework and its resolution. We demonstrate SPCA-TV's effectiveness and versatility on three different data sets. It can be applied to any kind of structured data, such as, e.g., -dimensional array images or meshes of cortical surfaces. The gains of SPCA-TV over unstructured approaches (such as SPCA and ElasticNet PCA) or structured approach

A New Model for Birth Weight Prediction Using 2- and 3-Dimensional Ultrasonography by Principal Component Analysis: A Chinese Population Study.

Science.gov (United States)

Liao, Shuxin; Wang, Yunfang; Xiao, Shufang; Deng, Xujie; Fang, Bimei; Yang, Fang

2018-03-30

To establish a new model for birth weight prediction using 2- and 3-dimensional ultrasonography (US) by principal component analysis (PCA). Two- and 3-dimensional US was prospectively performed in women with normal singleton pregnancies within 7 days before delivery (37-41 weeks' gestation). The participants were divided into a development group (n = 600) and a validation group (n = 597). Principal component analysis and stepwise linear regression analysis were used to develop a new prediction model. The new model's accuracy in predicting fetal birth weight was confirmed by the validation group through comparisons with previously published formulas. A total of 1197 cases were recruited in this study. All interclass and intraclass correlation coefficients of US measurements were greater than 0.75. Two principal components (PCs) were considered primary in determining estimated fetal birth weight, which were derived from 9 US measurements. Stepwise linear regression analysis showed a positive association between birth weight and PC1 and PC2. In the development group, our model had a small mean percentage error (mean ± SD, 3.661% ± 3.161%). At least a 47.558% decrease in the mean percentage error and a 57.421% decrease in the standard deviation of the new model compared with previously published formulas were noted. The results were similar to those in the validation group, and the new model covered 100% of birth weights within 10% of actual birth weights. The birth weight prediction model based on 2- and 3-dimensional US by PCA could help improve the precision of estimated fetal birth weight. © 2018 by the American Institute of Ultrasound in Medicine.

The Purification Method of Matching Points Based on Principal Component Analysis

Directory of Open Access Journals (Sweden)

DONG Yang

2017-02-01

Full Text Available The traditional purification method of matching points usually uses a small number of the points as initial input. Though it can meet most of the requirements of point constraints, the iterative purification solution is easy to fall into local extreme, which results in the missing of correct matching points. To solve this problem, we introduce the principal component analysis method to use the whole point set as initial input. And thorough mismatching points step eliminating and robust solving, more accurate global optimal solution, which intends to reduce the omission rate of correct matching points and thus reaches better purification effect, can be obtained. Experimental results show that this method can obtain the global optimal solution under a certain original false matching rate, and can decrease or avoid the omission of correct matching points.

Principal component analysis of MSBAS DInSAR time series from Campi Flegrei, Italy

Science.gov (United States)

Tiampo, Kristy F.; González, Pablo J.; Samsonov, Sergey; Fernández, Jose; Camacho, Antonio

2017-09-01

Because of its proximity to the city of Naples and with a population of nearly 1 million people within its caldera, Campi Flegrei is one of the highest risk volcanic areas in the world. Since the last major eruption in 1538, the caldera has undergone frequent episodes of ground subsidence and uplift accompanied by seismic activity that has been interpreted as the result of a stationary, deeper source below the caldera that feeds shallower eruptions. However, the location and depth of the deeper source is not well-characterized and its relationship to current activity is poorly understood. Recently, a significant increase in the uplift rate has occurred, resulting in almost 13 cm of uplift by 2013 (De Martino et al., 2014; Samsonov et al., 2014b; Di Vito et al., 2016). Here we apply a principal component decomposition to high resolution time series from the region produced by the advanced Multidimensional SBAS DInSAR technique in order to better delineate both the deeper source and the recent shallow activity. We analyzed both a period of substantial subsidence (1993-1999) and a second of significant uplift (2007-2013) and inverted the associated vertical surface displacement for the most likely source models. Results suggest that the underlying dynamics of the caldera changed in the late 1990s, from one in which the primary signal arises from a shallow deflating source above a deeper, expanding source to one dominated by a shallow inflating source. In general, the shallow source lies between 2700 and 3400 m below the caldera while the deeper source lies at 7600 m or more in depth. The combination of principal component analysis with high resolution MSBAS time series data allows for these new insights and confirms the applicability of both to areas at risk from dynamic natural hazards.

A stable systemic risk ranking in China's banking sector: Based on principal component analysis

Science.gov (United States)

Fang, Libing; Xiao, Binqing; Yu, Honghai; You, Qixing

2018-02-01

In this paper, we compare five popular systemic risk rankings, and apply principal component analysis (PCA) model to provide a stable systemic risk ranking for the Chinese banking sector. Our empirical results indicate that five methods suggest vastly different systemic risk rankings for the same bank, while the combined systemic risk measure based on PCA provides a reliable ranking. Furthermore, according to factor loadings of the first component, PCA combined ranking is mainly based on fundamentals instead of market price data. We clearly find that price-based rankings are not as practical a method as fundamentals-based ones. This PCA combined ranking directly shows systemic risk contributions of each bank for banking supervision purpose and reminds banks to prevent and cope with the financial crisis in advance.

Factors affecting medication adherence in community-managed patients with hypertension based on the principal component analysis: evidence from Xinjiang, China.

Science.gov (United States)

Zhang, Yuji; Li, Xiaoju; Mao, Lu; Zhang, Mei; Li, Ke; Zheng, Yinxia; Cui, Wangfei; Yin, Hongpo; He, Yanli; Jing, Mingxia

2018-01-01

The analysis of factors affecting the nonadherence to antihypertensive medications is important in the control of blood pressure among patients with hypertension. The purpose of this study was to assess the relationship between factors and medication adherence in Xinjiang community-managed patients with hypertension based on the principal component analysis. A total of 1,916 community-managed patients with hypertension, selected randomly through a multi-stage sampling, participated in the survey. Self-designed questionnaires were used to classify the participants as either adherent or nonadherent to their medication regimen. A principal component analysis was used in order to eliminate the correlation between factors. Factors related to nonadherence were analyzed by using a χ 2 -test and a binary logistic regression model. This study extracted nine common factors, with a cumulative variance contribution rate of 63.6%. Further analysis revealed that the following variables were significantly related to nonadherence: severity of disease, community management, diabetes, and taking traditional medications. Community management plays an important role in improving the patients' medication-taking behavior. Regular medication regimen instruction and better community management services through community-level have the potential to reduce nonadherence. Mild hypertensive patients should be monitored by community health care providers.

Trajectory modeling of gestational weight: A functional principal component analysis approach.

Directory of Open Access Journals (Sweden)

Menglu Che

Full Text Available Suboptimal gestational weight gain (GWG, which is linked to increased risk of adverse outcomes for a pregnant woman and her infant, is prevalent. In the study of a large cohort of Canadian pregnant women, our goals are to estimate the individual weight growth trajectory using sparsely collected bodyweight data, and to identify the factors affecting the weight change during pregnancy, such as prepregnancy body mass index (BMI, dietary intakes and physical activity. The first goal was achieved through functional principal component analysis (FPCA by conditional expectation. For the second goal, we used linear regression with the total weight gain as the response variable. The trajectory modeling through FPCA had a significantly smaller root mean square error (RMSE and improved adaptability than the classic nonlinear mixed-effect models, demonstrating a novel tool that can be used to facilitate real time monitoring and interventions of GWG. Our regression analysis showed that prepregnancy BMI had a high predictive value for the weight changes during pregnancy, which agrees with the published weight gain guideline.

A Unified Approach to Functional Principal Component Analysis and Functional Multiple-Set Canonical Correlation.

Science.gov (United States)

Choi, Ji Yeh; Hwang, Heungsun; Yamamoto, Michio; Jung, Kwanghee; Woodward, Todd S

2017-06-01

Functional principal component analysis (FPCA) and functional multiple-set canonical correlation analysis (FMCCA) are data reduction techniques for functional data that are collected in the form of smooth curves or functions over a continuum such as time or space. In FPCA, low-dimensional components are extracted from a single functional dataset such that they explain the most variance of the dataset, whereas in FMCCA, low-dimensional components are obtained from each of multiple functional datasets in such a way that the associations among the components are maximized across the different sets. In this paper, we propose a unified approach to FPCA and FMCCA. The proposed approach subsumes both techniques as special cases. Furthermore, it permits a compromise between the techniques, such that components are obtained from each set of functional data to maximize their associations across different datasets, while accounting for the variance of the data well. We propose a single optimization criterion for the proposed approach, and develop an alternating regularized least squares algorithm to minimize the criterion in combination with basis function approximations to functions. We conduct a simulation study to investigate the performance of the proposed approach based on synthetic data. We also apply the approach for the analysis of multiple-subject functional magnetic resonance imaging data to obtain low-dimensional components of blood-oxygen level-dependent signal changes of the brain over time, which are highly correlated across the subjects as well as representative of the data. The extracted components are used to identify networks of neural activity that are commonly activated across the subjects while carrying out a working memory task.

Multivariate analysis of remote LIBS spectra using partial least squares, principal component analysis, and related techniques

Energy Technology Data Exchange (ETDEWEB)

Clegg, Samuel M [Los Alamos National Laboratory; Barefield, James E [Los Alamos National Laboratory; Wiens, Roger C [Los Alamos National Laboratory; Sklute, Elizabeth [MT HOLYOKE COLLEGE; Dyare, Melinda D [MT HOLYOKE COLLEGE

2008-01-01

Quantitative analysis with LIBS traditionally employs calibration curves that are complicated by the chemical matrix effects. These chemical matrix effects influence the LIBS plasma and the ratio of elemental composition to elemental emission line intensity. Consequently, LIBS calibration typically requires a priori knowledge of the unknown, in order for a series of calibration standards similar to the unknown to be employed. In this paper, three new Multivariate Analysis (MV A) techniques are employed to analyze the LIBS spectra of 18 disparate igneous and highly-metamorphosed rock samples. Partial Least Squares (PLS) analysis is used to generate a calibration model from which unknown samples can be analyzed. Principal Components Analysis (PCA) and Soft Independent Modeling of Class Analogy (SIMCA) are employed to generate a model and predict the rock type of the samples. These MV A techniques appear to exploit the matrix effects associated with the chemistries of these 18 samples.

An Efficient Data Compression Model Based on Spatial Clustering and Principal Component Analysis in Wireless Sensor Networks

Directory of Open Access Journals (Sweden)

Yihang Yin

2015-08-01

Full Text Available Wireless sensor networks (WSNs have been widely used to monitor the environment, and sensors in WSNs are usually power constrained. Because inner-node communication consumes most of the power, efficient data compression schemes are needed to reduce the data transmission to prolong the lifetime of WSNs. In this paper, we propose an efficient data compression model to aggregate data, which is based on spatial clustering and principal component analysis (PCA. First, sensors with a strong temporal-spatial correlation are grouped into one cluster for further processing with a novel similarity measure metric. Next, sensor data in one cluster are aggregated in the cluster head sensor node, and an efficient adaptive strategy is proposed for the selection of the cluster head to conserve energy. Finally, the proposed model applies principal component analysis with an error bound guarantee to compress the data and retain the definite variance at the same time. Computer simulations show that the proposed model can greatly reduce communication and obtain a lower mean square error than other PCA-based algorithms.

An Efficient Data Compression Model Based on Spatial Clustering and Principal Component Analysis in Wireless Sensor Networks.

Science.gov (United States)

Yin, Yihang; Liu, Fengzheng; Zhou, Xiang; Li, Quanzhong

2015-08-07

Wireless sensor networks (WSNs) have been widely used to monitor the environment, and sensors in WSNs are usually power constrained. Because inner-node communication consumes most of the power, efficient data compression schemes are needed to reduce the data transmission to prolong the lifetime of WSNs. In this paper, we propose an efficient data compression model to aggregate data, which is based on spatial clustering and principal component analysis (PCA). First, sensors with a strong temporal-spatial correlation are grouped into one cluster for further processing with a novel similarity measure metric. Next, sensor data in one cluster are aggregated in the cluster head sensor node, and an efficient adaptive strategy is proposed for the selection of the cluster head to conserve energy. Finally, the proposed model applies principal component analysis with an error bound guarantee to compress the data and retain the definite variance at the same time. Computer simulations show that the proposed model can greatly reduce communication and obtain a lower mean square error than other PCA-based algorithms.

Application of principal component analysis to multispectral imaging data for evaluation of pigmented skin lesions

Science.gov (United States)

Jakovels, Dainis; Lihacova, Ilze; Kuzmina, Ilona; Spigulis, Janis

2013-11-01

Non-invasive and fast primary diagnostics of pigmented skin lesions is required due to frequent incidence of skin cancer - melanoma. Diagnostic potential of principal component analysis (PCA) for distant skin melanoma recognition is discussed. Processing of the measured clinical multi-spectral images (31 melanomas and 94 nonmalignant pigmented lesions) in the wavelength range of 450-950 nm by means of PCA resulted in 87 % sensitivity and 78 % specificity for separation between malignant melanomas and pigmented nevi.

Contact- and distance-based principal component analysis of protein dynamics

Energy Technology Data Exchange (ETDEWEB)

Ernst, Matthias; Sittel, Florian; Stock, Gerhard, E-mail: stock@physik.uni-freiburg.de [Biomolecular Dynamics, Institute of Physics, Albert Ludwigs University, 79104 Freiburg (Germany)

2015-12-28

To interpret molecular dynamics simulations of complex systems, systematic dimensionality reduction methods such as principal component analysis (PCA) represent a well-established and popular approach. Apart from Cartesian coordinates, internal coordinates, e.g., backbone dihedral angles or various kinds of distances, may be used as input data in a PCA. Adopting two well-known model problems, folding of villin headpiece and the functional dynamics of BPTI, a systematic study of PCA using distance-based measures is presented which employs distances between C{sub α}-atoms as well as distances between inter-residue contacts including side chains. While this approach seems prohibitive for larger systems due to the quadratic scaling of the number of distances with the size of the molecule, it is shown that it is sufficient (and sometimes even better) to include only relatively few selected distances in the analysis. The quality of the PCA is assessed by considering the resolution of the resulting free energy landscape (to identify metastable conformational states and barriers) and the decay behavior of the corresponding autocorrelation functions (to test the time scale separation of the PCA). By comparing results obtained with distance-based, dihedral angle, and Cartesian coordinates, the study shows that the choice of input variables may drastically influence the outcome of a PCA.

Empirical research on financial capability evaluation of A-share listed companies in the securities industry based on principal component analysis

Directory of Open Access Journals (Sweden)

Xiuping Wang

2017-11-01

Full Text Available Based on the relevant financial data indicators of A-share markets of Shanghai and Shenzhen in 2009, with all of 29 listed companies in the securities industry as the research objects, this paper selects 10variables that can fully reflect the financial capability indicators and uses the principal component analysis to carry out the empirical research on the financial capability. The research results show that the comprehensive financial capability of listed companies in A-share securities industry must be focused on the following four capabilities, investment and income, profit, capital composition and debt repayment and cash flow indicators. In addition, the principal component analysis can effectively evaluate the financial capability of listed companies in A-share securities industry, and solve the problems in the previous analysis methods, such as excessive indicators, information overlapping and so on.

Sensor Failure Detection of FASSIP System using Principal Component Analysis

Science.gov (United States)

Sudarno; Juarsa, Mulya; Santosa, Kussigit; Deswandri; Sunaryo, Geni Rina

2018-02-01

In the nuclear reactor accident of Fukushima Daiichi in Japan, the damages of core and pressure vessel were caused by the failure of its active cooling system (diesel generator was inundated by tsunami). Thus researches on passive cooling system for Nuclear Power Plant are performed to improve the safety aspects of nuclear reactors. The FASSIP system (Passive System Simulation Facility) is an installation used to study the characteristics of passive cooling systems at nuclear power plants. The accuracy of sensor measurement of FASSIP system is essential, because as the basis for determining the characteristics of a passive cooling system. In this research, a sensor failure detection method for FASSIP system is developed, so the indication of sensor failures can be detected early. The method used is Principal Component Analysis (PCA) to reduce the dimension of the sensor, with the Squarred Prediction Error (SPE) and statistic Hotteling criteria for detecting sensor failure indication. The results shows that PCA method is capable to detect the occurrence of a failure at any sensor.

Learning representative features for facial images based on a modified principal component analysis

Science.gov (United States)

Averkin, Anton; Potapov, Alexey

2013-05-01

The paper is devoted to facial image analysis and particularly deals with the problem of automatic evaluation of the attractiveness of human faces. We propose a new approach for automatic construction of feature space based on a modified principal component analysis. Input data sets for the algorithm are the learning data sets of facial images, which are rated by one person. The proposed approach allows one to extract features of the individual subjective face beauty perception and to predict attractiveness values for new facial images, which were not included into a learning data set. The Pearson correlation coefficient between values predicted by our method for new facial images and personal attractiveness estimation values equals to 0.89. This means that the new approach proposed is promising and can be used for predicting subjective face attractiveness values in real systems of the facial images analysis.

Principal components analysis of an evaluation of the hemiplegic subject based on the Bobath approach.

Science.gov (United States)

Corriveau, H; Arsenault, A B; Dutil, E; Lepage, Y

1992-01-01

An evaluation based on the Bobath approach to treatment has previously been developed and partially validated. The purpose of the present study was to verify the content validity of this evaluation with the use of a statistical approach known as principal components analysis. Thirty-eight hemiplegic subjects participated in the study. Analysis of the scores on each of six parameters (sensorium, active movements, muscle tone, reflex activity, postural reactions, and pain) was evaluated on three occasions across a 2-month period. Each time this produced three factors that contained 70% of the variation in the data set. The first component mainly reflected variations in mobility, the second mainly variations in muscle tone, and the third mainly variations in sensorium and pain. The results of such exploratory analysis highlight the fact that some of the parameters are not only important but also interrelated. These results seem to partially support the conceptual framework substantiating the Bobath approach to treatment.

Multiobjective Optimization of ELID Grinding Process Using Grey Relational Analysis Coupled with Principal Component Analysis

Directory of Open Access Journals (Sweden)

S. Prabhu

2014-06-01

Full Text Available Carbon nanotube (CNT mixed grinding wheel has been used in the electrolytic in-process dressing (ELID grinding process to analyze the surface characteristics of AISI D2 Tool steel material. CNT grinding wheel is having an excellent thermal conductivity and good mechanical property which is used to improve the surface finish of the work piece. The multiobjective optimization of grey relational analysis coupled with principal component analysis has been used to optimize the process parameters of ELID grinding process. Based on the Taguchi design of experiments, an L9 orthogonal array table was chosen for the experiments. The confirmation experiment verifies the proposed that grey-based Taguchi method has the ability to find out the optimal process parameters with multiple quality characteristics of surface roughness and metal removal rate. Analysis of variance (ANOVA has been used to verify and validate the model. Empirical model for the prediction of output parameters has been developed using regression analysis and the results were compared for with and without using CNT grinding wheel in ELID grinding process.

Principal component analysis-based imaging angle determination for 3D motion monitoring using single-slice on-board imaging.

Science.gov (United States)

Chen, Ting; Zhang, Miao; Jabbour, Salma; Wang, Hesheng; Barbee, David; Das, Indra J; Yue, Ning

2018-04-10

Through-plane motion introduces uncertainty in three-dimensional (3D) motion monitoring when using single-slice on-board imaging (OBI) modalities such as cine MRI. We propose a principal component analysis (PCA)-based framework to determine the optimal imaging plane to minimize the through-plane motion for single-slice imaging-based motion monitoring. Four-dimensional computed tomography (4DCT) images of eight thoracic cancer patients were retrospectively analyzed. The target volumes were manually delineated at different respiratory phases of 4DCT. We performed automated image registration to establish the 4D respiratory target motion trajectories for all patients. PCA was conducted using the motion information to define the three principal components of the respiratory motion trajectories. Two imaging planes were determined perpendicular to the second and third principal component, respectively, to avoid imaging with the primary principal component of the through-plane motion. Single-slice images were reconstructed from 4DCT in the PCA-derived orthogonal imaging planes and were compared against the traditional AP/Lateral image pairs on through-plane motion, residual error in motion monitoring, absolute motion amplitude error and the similarity between target segmentations at different phases. We evaluated the significance of the proposed motion monitoring improvement using paired t test analysis. The PCA-determined imaging planes had overall less through-plane motion compared against the AP/Lateral image pairs. For all patients, the average through-plane motion was 3.6 mm (range: 1.6-5.6 mm) for the AP view and 1.7 mm (range: 0.6-2.7 mm) for the Lateral view. With PCA optimization, the average through-plane motion was 2.5 mm (range: 1.3-3.9 mm) and 0.6 mm (range: 0.2-1.5 mm) for the two imaging planes, respectively. The absolute residual error of the reconstructed max-exhale-to-inhale motion averaged 0.7 mm (range: 0.4-1.3 mm, 95% CI: 0.4-1.1 mm) using

Application of principal component regression and partial least squares regression in ultraviolet spectrum water quality detection

Science.gov (United States)

Li, Jiangtong; Luo, Yongdao; Dai, Honglin

2018-01-01

Water is the source of life and the essential foundation of all life. With the development of industrialization, the phenomenon of water pollution is becoming more and more frequent, which directly affects the survival and development of human. Water quality detection is one of the necessary measures to protect water resources. Ultraviolet (UV) spectral analysis is an important research method in the field of water quality detection, which partial least squares regression (PLSR) analysis method is becoming predominant technology, however, in some special cases, PLSR's analysis produce considerable errors. In order to solve this problem, the traditional principal component regression (PCR) analysis method was improved by using the principle of PLSR in this paper. The experimental results show that for some special experimental data set, improved PCR analysis method performance is better than PLSR. The PCR and PLSR is the focus of this paper. Firstly, the principal component analysis (PCA) is performed by MATLAB to reduce the dimensionality of the spectral data; on the basis of a large number of experiments, the optimized principal component is extracted by using the principle of PLSR, which carries most of the original data information. Secondly, the linear regression analysis of the principal component is carried out with statistic package for social science (SPSS), which the coefficients and relations of principal components can be obtained. Finally, calculating a same water spectral data set by PLSR and improved PCR, analyzing and comparing two results, improved PCR and PLSR is similar for most data, but improved PCR is better than PLSR for data near the detection limit. Both PLSR and improved PCR can be used in Ultraviolet spectral analysis of water, but for data near the detection limit, improved PCR's result better than PLSR.

On combining principal components with Fisher's linear discriminants for supervised learning

NARCIS (Netherlands)

Pechenizkiy, M.; Tsymbal, A.; Puuronen, S.

2006-01-01

"The curse of dimensionality" is pertinent to many learning algorithms, and it denotes the drastic increase of computational complexity and classification error in high dimensions. In this paper, principal component analysis (PCA), parametric feature extraction (FE) based on Fisher’s linear

Principal components analysis based control of a multi-dof underactuated prosthetic hand

Directory of Open Access Journals (Sweden)

Magenes Giovanni

2010-04-01

Full Text Available Abstract Background Functionality, controllability and cosmetics are the key issues to be addressed in order to accomplish a successful functional substitution of the human hand by means of a prosthesis. Not only the prosthesis should duplicate the human hand in shape, functionality, sensorization, perception and sense of body-belonging, but it should also be controlled as the natural one, in the most intuitive and undemanding way. At present, prosthetic hands are controlled by means of non-invasive interfaces based on electromyography (EMG. Driving a multi degrees of freedom (DoF hand for achieving hand dexterity implies to selectively modulate many different EMG signals in order to make each joint move independently, and this could require significant cognitive effort to the user. Methods A Principal Components Analysis (PCA based algorithm is used to drive a 16 DoFs underactuated prosthetic hand prototype (called CyberHand with a two dimensional control input, in order to perform the three prehensile forms mostly used in Activities of Daily Living (ADLs. Such Principal Components set has been derived directly from the artificial hand by collecting its sensory data while performing 50 different grasps, and subsequently used for control. Results Trials have shown that two independent input signals can be successfully used to control the posture of a real robotic hand and that correct grasps (in terms of involved fingers, stability and posture may be achieved. Conclusions This work demonstrates the effectiveness of a bio-inspired system successfully conjugating the advantages of an underactuated, anthropomorphic hand with a PCA-based control strategy, and opens up promising possibilities for the development of an intuitively controllable hand prosthesis.

Use of a Principal Components Analysis for the Generation of Daily Time Series.

Science.gov (United States)

Dreveton, Christine; Guillou, Yann

2004-07-01

A new approach for generating daily time series is considered in response to the weather-derivatives market. This approach consists of performing a principal components analysis to create independent variables, the values of which are then generated separately with a random process. Weather derivatives are financial or insurance products that give companies the opportunity to cover themselves against adverse climate conditions. The aim of a generator is to provide a wider range of feasible situations to be used in an assessment of risk. Generation of a temperature time series is required by insurers or bankers for pricing weather options. The provision of conditional probabilities and a good representation of the interannual variance are the main challenges of a generator when used for weather derivatives. The generator was developed according to this new approach using a principal components analysis and was applied to the daily average temperature time series of the Paris-Montsouris station in France. The observed dataset was homogenized and the trend was removed to represent correctly the present climate. The results obtained with the generator show that it represents correctly the interannual variance of the observed climate; this is the main result of the work, because one of the main discrepancies of other generators is their inability to represent accurately the observed interannual climate variance—this discrepancy is not acceptable for an application to weather derivatives. The generator was also tested to calculate conditional probabilities: for example, the knowledge of the aggregated value of heating degree-days in the middle of the heating season allows one to estimate the probability if reaching a threshold at the end of the heating season. This represents the main application of a climate generator for use with weather derivatives.

Image Denoising Algorithm Combined with SGK Dictionary Learning and Principal Component Analysis Noise Estimation

Directory of Open Access Journals (Sweden)

Wenjing Zhao

2018-01-01

Full Text Available SGK (sequential generalization of K-means dictionary learning denoising algorithm has the characteristics of fast denoising speed and excellent denoising performance. However, the noise standard deviation must be known in advance when using SGK algorithm to process the image. This paper presents a denoising algorithm combined with SGK dictionary learning and the principal component analysis (PCA noise estimation. At first, the noise standard deviation of the image is estimated by using the PCA noise estimation algorithm. And then it is used for SGK dictionary learning algorithm. Experimental results show the following: (1 The SGK algorithm has the best denoising performance compared with the other three dictionary learning algorithms. (2 The SGK algorithm combined with PCA is superior to the SGK algorithm combined with other noise estimation algorithms. (3 Compared with the original SGK algorithm, the proposed algorithm has higher PSNR and better denoising performance.

Automatic scatter detection in fluorescence landscapes by means of spherical principal component analysis

DEFF Research Database (Denmark)

Kotwa, Ewelina Katarzyna; Jørgensen, Bo Munk; Brockhoff, Per B.

2013-01-01

In this paper, we introduce a new method, based on spherical principal component analysis (S‐PCA), for the identification of Rayleigh and Raman scatters in fluorescence excitation–emission data. These scatters should be found and eliminated as a prestep before fitting parallel factor analysis...... models to the data, in order to avoid model degeneracies. The work is inspired and based on a previous research, where scatter removal was automatic (based on a robust version of PCA called ROBPCA) and required no visual data inspection but appeared to be computationally intensive. To overcome...... this drawback, we implement the fast S‐PCA in the scatter identification routine. Moreover, an additional pattern interpolation step that complements the method, based on robust regression, will be applied. In this way, substantial time savings are gained, and the user's engagement is restricted to a minimum...

Ecological Safety Evaluation of Land Use in Ji’an City Based on the Principal Component Analysis

Institute of Scientific and Technical Information of China (English)

2010-01-01

According to the ecological safety evaluation index data of land-use change in Ji’an City from 1999 to 2008,positive treatment on selected reverse indices is conducted by Reciprocal Method.Meanwhile,Index Method is used to standardize the selected indices,and Principal Component Analysis is applied by using year as a unit.FB is obtained,which is related with the ecological safety of land-use change from 1999 to 2008.According to the scientific,integrative,hierarchical,practical and dynamic principles,ecological safety evaluation index system of land-use change in Ji’an City is established.Principal Component Analysis and evaluation model are used to calculate four parameters,including the natural resources safety index of land use,the socio-economic safety indicators of land use,the eco-environmental safety index of land use,and the ecological safety degree of land use in Ji’an City.Result indicates that the ecological safety degree of land use in Ji’an City shows a slow upward trend as a whole.At the same time,ecological safety degree of land-use change is relatively low in Ji’an City with the safety value of 0.645,which is at a weak safety zone and needs further monitoring and maintenance.

Fault diagnosis of main coolant pump in the nuclear power station based on the principal component analysis

International Nuclear Information System (INIS)

Feng Junting; Xu Mi; Wang Guizeng

2003-01-01

The fault diagnosis method based on principal component analysis is studied. The fault character direction storeroom of fifteen parameters abnormity is built in the simulation for the main coolant pump of nuclear power station. The measuring data are analyzed, and the results show that it is feasible for the fault diagnosis system of main coolant pump in the nuclear power station

InterFace: A software package for face image warping, averaging, and principal components analysis.

Science.gov (United States)

Kramer, Robin S S; Jenkins, Rob; Burton, A Mike

2017-12-01

We describe InterFace, a software package for research in face recognition. The package supports image warping, reshaping, averaging of multiple face images, and morphing between faces. It also supports principal components analysis (PCA) of face images, along with tools for exploring the "face space" produced by PCA. The package uses a simple graphical user interface, allowing users to perform these sophisticated image manipulations without any need for programming knowledge. The program is available for download in the form of an app, which requires that users also have access to the (freely available) MATLAB Runtime environment.

Diagnose Test-Taker's Profile in Terms of Core Profile Patterns: Principal Component (PC) vs. Profile Analysis via MDS (PAMS) Approaches.

Science.gov (United States)

Kim, Se-Kang; Davison, Mark L.

A study was conducted to examine how principal components analysis (PCA) and Profile Analysis via Multidimensional Scaling (PAMS) can be used to diagnose individuals observed score profiles in terms of core profile patterns identified by each method. The standardization sample from the Wechsler Intelligence Scale for Children, Third Edition…

Fluoride characterization by principal component analysis in the hydrochemical facies of Serra Geral Aquifer System in Southern Brazil

Directory of Open Access Journals (Sweden)

Arthur Nanni

2008-12-01

Full Text Available Principal component analysis is applied to 309 groundwater chemical data information from wells in the Serra Geral Aquifer System. Correlations among seven hydrochemical parameters are statistically examined. A four-component model is suggested and explains 81% of total variance. Component 1 represents calcium-magnesium bicarbonated groundwaters with long time of residence. Component 2 represents sulfated and chlorinated calcium and sodium groundwaters; Component 3 represents sodium bicarbonated groundwaters; and Component 4 is characterized by sodium sulfated with high fluoride facies. The components' spatial distribution shows high fluoride concentration along analyzed tectonic fault system and aligned on northeast direction in other areas, suggesting other hydrogeological fault systems. High fluoride concentration increases according to groundwater pumping depth. The Principal Component Analysis reveals features of the groundwater mixture and individualizes water facies. In this scenery, it can be determined hydrogeological blocks associated with tectonic fault system here introduced.A Análise de Componentes Principais foi aplicada em 309 dados químicos de águas subterrâneas de poços do Sistema Aqüífero Serra Geral. Correlações entre sete parâmetros hidroquímicos foram examinadas através da estatística. O modelo de quatro componentes foi utilizado por explicar 81% da variância total. A Componente 1 é representada por águas cálcio-magnesianas com longo tempo de residência, a Componente 2 representa águas bicarbonatadas sulfatadas e cloretadas, a Componente 3 representa águas bicarbonatadas sódicas e a Componente 4 é caracterizada por águas de fácies sódica e sulfatada com alto fluoreto. A distribuição espacial das componentes mostra águas com concentrações anômalas ao longo dos sistemas tectônicos de falhas, analisados e alinhados a NE em algumas áreas, sugerindo outros sistemas de falhas hidrogeológicos. As

Principal component analysis of sensory properties of chicken breast muscle supplemented with different feed additives

Directory of Open Access Journals (Sweden)

Peter Haščík

2017-01-01

Full Text Available The objective of the present study was to examine the effect of different dietary supplements (bee pollen, propolis, and probiotic on sensory quality of chicken breast muscle. The experiment was performed with 180 one day-old Ross 308 broiler chicks of mixed sex. The dietary treatments were as follows: 1. basal diet with no supplementation as control (C; 2. basal diet plus 400 mg bee pollen extract per 1 kg of feed mixture (E1; 3. basal diet plus 400 mg propolis extract per 1 kg of feed mixture (E2; 4. basal diet plus 3.3 g probiotic preparation based on Lactobacillus fermentum added to drinking water (E3. Sensory properties of chicken breast muscle were assessed by a five-member panel that rated the meat for aroma, taste, juiciness, tenderness and overall acceptability. The ANOVA results for each attribute showed that at least one mean score for any group differs significantly (p ≤0.05. Subsequent Tukey's HSD revealed that only C group had significantly higher mean score (p ≤0.05 for each attribute compared with E2 group. As regards the E1 and E3 groups, there were not significant differences (p >0.05 in aroma, taste and tenderness when compared to C group, with the significantly lowest juiciness value (p ≤0.05 found in E3 group and significantly lower values of overall acceptability in both groups (p ≤0.05. In addition, it is noteworthy that control group received the highest raking scores for each sensory attribute, i.e. the supplements did not influence positively the sensory quality of chicken breast meat. Principal component analysis (PCA of the sensory data showed that the first 3 principal components (PCs explained 69.82% of the total variation in 5 variables. Visualisation of extracted PCs has shown that groups were very well represented, with E2 group clearly distinguished from the others.  Normal 0 21 false false false SK X-NONE X-NONE

Signal-to-noise contribution of principal component loads in reconstructed near-infrared Raman tissue spectra.

Science.gov (United States)

Grimbergen, M C M; van Swol, C F P; Kendall, C; Verdaasdonk, R M; Stone, N; Bosch, J L H R

2010-01-01

The overall quality of Raman spectra in the near-infrared region, where biological samples are often studied, has benefited from various improvements to optical instrumentation over the past decade. However, obtaining ample spectral quality for analysis is still challenging due to device requirements and short integration times required for (in vivo) clinical applications of Raman spectroscopy. Multivariate analytical methods, such as principal component analysis (PCA) and linear discriminant analysis (LDA), are routinely applied to Raman spectral datasets to develop classification models. Data compression is necessary prior to discriminant analysis to prevent or decrease the degree of over-fitting. The logical threshold for the selection of principal components (PCs) to be used in discriminant analysis is likely to be at a point before the PCs begin to introduce equivalent signal and noise and, hence, include no additional value. Assessment of the signal-to-noise ratio (SNR) at a certain peak or over a specific spectral region will depend on the sample measured. Therefore, the mean SNR over the whole spectral region (SNR(msr)) is determined in the original spectrum as well as for spectra reconstructed from an increasing number of principal components. This paper introduces a method of assessing the influence of signal and noise from individual PC loads and indicates a method of selection of PCs for LDA. To evaluate this method, two data sets with different SNRs were used. The sets were obtained with the same Raman system and the same measurement parameters on bladder tissue collected during white light cystoscopy (set A) and fluorescence-guided cystoscopy (set B). This method shows that the mean SNR over the spectral range in the original Raman spectra of these two data sets is related to the signal and noise contribution of principal component loads. The difference in mean SNR over the spectral range can also be appreciated since fewer principal components can

Support vector machine and principal component analysis for microarray data classification

Science.gov (United States)

Astuti, Widi; Adiwijaya

2018-03-01

Cancer is a leading cause of death worldwide although a significant proportion of it can be cured if it is detected early. In recent decades, technology called microarray takes an important role in the diagnosis of cancer. By using data mining technique, microarray data classification can be performed to improve the accuracy of cancer diagnosis compared to traditional techniques. The characteristic of microarray data is small sample but it has huge dimension. Since that, there is a challenge for researcher to provide solutions for microarray data classification with high performance in both accuracy and running time. This research proposed the usage of Principal Component Analysis (PCA) as a dimension reduction method along with Support Vector Method (SVM) optimized by kernel functions as a classifier for microarray data classification. The proposed scheme was applied on seven data sets using 5-fold cross validation and then evaluation and analysis conducted on term of both accuracy and running time. The result showed that the scheme can obtained 100% accuracy for Ovarian and Lung Cancer data when Linear and Cubic kernel functions are used. In term of running time, PCA greatly reduced the running time for every data sets.

Principal component analysis of air particulate data from the industrial area of islamabad, pakistan

International Nuclear Information System (INIS)

Waheed, S.; Siddique, N.; Daud, M.

2008-01-01

A Gent air sampler was used to collect 72 pairs of size fractionated coarse and fine (PM/sub 10/ and PM/sub 2.5/) particulate mass samples from the industrial zone (sector I-9) of Islamabad. These samples were analyzed for their elemental composition using Instrumental Neutron Activation Analysis (INAA). Principal component analysis (PCA), which can be used for source apportionment of quantified elemental data, was used to interpret the data. Graphical representations of loadings were used to explain the data through grouping of the elements from same source. The present work shows well defined elemental fingerprints of suspended soil and road dust, industry, motor vehicle exhaust and tyres, and coal and refuses combustions for the studied locality of Islamabad. (author)

Principal Component Analysis In Radar Polarimetry

Directory of Open Access Journals (Sweden)

A. Danklmayer

2005-01-01

Full Text Available Second order moments of multivariate (often Gaussian joint probability density functions can be described by the covariance or normalised correlation matrices or by the Kennaugh matrix (Kronecker matrix. In Radar Polarimetry the application of the covariance matrix is known as target decomposition theory, which is a special application of the extremely versatile Principle Component Analysis (PCA. The basic idea of PCA is to convert a data set, consisting of correlated random variables into a new set of uncorrelated variables and order the new variables according to the value of their variances. It is important to stress that uncorrelatedness does not necessarily mean independent which is used in the much stronger concept of Independent Component Analysis (ICA. Both concepts agree for multivariate Gaussian distribution functions, representing the most random and least structured distribution. In this contribution, we propose a new approach in applying the concept of PCA to Radar Polarimetry. Therefore, new uncorrelated random variables will be introduced by means of linear transformations with well determined loading coefficients. This in turn, will allow the decomposition of the original random backscattering target variables into three point targets with new random uncorrelated variables whose variances agree with the eigenvalues of the covariance matrix. This allows a new interpretation of existing decomposition theorems.

Simulation of an industrial wastewater treatment plant using artificial neural networks and principal components analysis

Directory of Open Access Journals (Sweden)

Oliveira-Esquerre K.P.

2002-01-01

Full Text Available This work presents a way to predict the biochemical oxygen demand (BOD of the output stream of the biological wastewater treatment plant at RIPASA S/A Celulose e Papel, one of the major pulp and paper plants in Brazil. The best prediction performance is achieved when the data are preprocessed using principal components analysis (PCA before they are fed to a backpropagated neural network. The influence of input variables is analyzed and satisfactory prediction results are obtained for an optimized situation.

Real-time detection of organic contamination events in water distribution systems by principal components analysis of ultraviolet spectral data.

Science.gov (United States)

Zhang, Jian; Hou, Dibo; Wang, Ke; Huang, Pingjie; Zhang, Guangxin; Loáiciga, Hugo

2017-05-01

The detection of organic contaminants in water distribution systems is essential to protect public health from potential harmful compounds resulting from accidental spills or intentional releases. Existing methods for detecting organic contaminants are based on quantitative analyses such as chemical testing and gas/liquid chromatography, which are time- and reagent-consuming and involve costly maintenance. This study proposes a novel procedure based on discrete wavelet transform and principal component analysis for detecting organic contamination events from ultraviolet spectral data. Firstly, the spectrum of each observation is transformed using discrete wavelet with a coiflet mother wavelet to capture the abrupt change along the wavelength. Principal component analysis is then employed to approximate the spectra based on capture and fusion features. The significant value of Hotelling's T 2 statistics is calculated and used to detect outliers. An alarm of contamination event is triggered by sequential Bayesian analysis when the outliers appear continuously in several observations. The effectiveness of the proposed procedure is tested on-line using a pilot-scale setup and experimental data.

New Role of Thermal Mapping in Winter Maintenance with Principal Components Analysis

Directory of Open Access Journals (Sweden)

Mario Marchetti

2014-01-01

Full Text Available Thermal mapping uses IR thermometry to measure road pavement temperature at a high resolution to identify and to map sections of the road network prone to ice occurrence. However, measurements are time-consuming and ultimately only provide a snapshot of road conditions at the time of the survey. As such, there is a need for surveys to be restricted to a series of specific climatic conditions during winter. Typically, five to six surveys are used, but it is questionable whether the full range of atmospheric conditions is adequately covered. This work investigates the role of statistics in adding value to thermal mapping data. Principal components analysis is used to interpolate between individual thermal mapping surveys to build a thermal map (or even a road surface temperature forecast, for a wider range of climatic conditions than that permitted by traditional surveys. The results indicate that when this approach is used, fewer thermal mapping surveys are actually required. Furthermore, comparisons with numerical models indicate that this approach could yield a suitable verification method for the spatial component of road weather forecasts—a key issue currently in winter road maintenance.

Masked volume wise principal component analysis of small adrenocortical tumours in dynamic [11C]-metomidate positron emission tomography

International Nuclear Information System (INIS)

Razifar, Pasha; Hennings, Joakim; Monazzam, Azita; Hellman, Per; Långström, Bengt; Sundin, Anders

2009-01-01

In previous clinical Positron Emission Tomography (PET) studies novel approaches for application of Principal Component Analysis (PCA) on dynamic PET images such as Masked Volume Wise PCA (MVW-PCA) have been introduced. MVW-PCA was shown to be a feasible multivariate analysis technique, which, without modeling assumptions, could extract and separate organs and tissues with different kinetic behaviors into different principal components (MVW-PCs) and improve the image quality. In this study, MVW-PCA was applied to 14 dynamic 11C-metomidate-PET (MTO-PET) examinations of 7 patients with small adrenocortical tumours. MTO-PET was performed before and 3 days after starting per oral cortisone treatment. The whole dataset, reconstructed by filtered back projection (FBP) 0–45 minutes after the tracer injection, was used to study the tracer pharmacokinetics. Early, intermediate and late pharmacokinetic phases could be isolated in this manner. The MVW-PC1 images correlated well to the conventionally summed image data (15–45 minutes) but the image noise in the former was considerably lower. PET measurements performed by defining 'hot spot' regions of interest (ROIs) comprising 4 contiguous pixels with the highest radioactivity concentration showed a trend towards higher SUVs when the ROIs were outlined in the MVW-PC1 component than in the summed images. Time activity curves derived from '50% cut-off' ROIs based on an isocontour function whereby the pixels with SUVs between 50 to 100% of the highest radioactivity concentration were delineated, showed a significant decrease of the SUVs in normal adrenal glands and in adrenocortical adenomas after cortisone treatment. In addition to the clear decrease in image noise and the improved contrast between different structures with MVW-PCA, the results indicate that the definition of ROIs may be more accurate and precise in MVW-PC1 images than in conventional summed images. This might improve the precision of PET

Single shot fringe pattern phase demodulation using Hilbert-Huang transform aided by the principal component analysis.

Science.gov (United States)

Trusiak, Maciej; Służewski, Łukasz; Patorski, Krzysztof

2016-02-22

Hybrid single shot algorithm for accurate phase demodulation of complex fringe patterns is proposed. It employs empirical mode decomposition based adaptive fringe pattern enhancement (i.e., denoising, background removal and amplitude normalization) and subsequent boosted phase demodulation using 2D Hilbert spiral transform aided by the Principal Component Analysis method for novel, correct and accurate local fringe direction map calculation. Robustness to fringe pattern significant noise, uneven background and amplitude modulation as well as local fringe period and shape variations is corroborated by numerical simulations and experiments. Proposed automatic, adaptive, fast and comprehensive fringe analysis solution compares favorably with other previously reported techniques.

Principal component analysis of the Norwegian version of the quality of life in late-stage dementia scale.

Science.gov (United States)

Mjørud, Marit; Kirkevold, Marit; Røsvik, Janne; Engedal, Knut

2014-01-01

To investigate which factors the Quality of Life in Late-Stage Dementia (QUALID) scale holds when used among people with dementia (pwd) in nursing homes and to find out how the symptom load varies across the different severity levels of dementia. We included 661 pwd [mean age ± SD, 85.3 ± 8.6 years; 71.4% women]. The QUALID and the Clinical Dementia Rating (CDR) scale were applied. A principal component analysis (PCA) with varimax rotation and Kaiser normalization was applied to test the factor structure. Nonparametric analyses were applied to examine differences of symptom load across the three CDR groups. The mean QUALID score was 21.5 (±7.1), and the CDR scores of the three groups were 1 in 22.5%, 2 in 33.6% and 3 in 43.9%. The results of the statistical measures employed were the following: Crohnbach's α of QUALID, 0.74; Bartlett's test of sphericity, p Kaiser-Meyer-Olkin measure, 0.77. The PCA analysis resulted in three components accounting for 53% of the variance. The first component was 'tension' ('facial expression of discomfort', 'appears physically uncomfortable', 'verbalization suggests discomfort', 'being irritable and aggressive', 'appears calm', Crohnbach's α = 0.69), the second was 'well-being' ('smiles', 'enjoys eating', 'enjoys touching/being touched', 'enjoys social interaction', Crohnbach's α = 0.62) and the third was 'sadness' ('appears sad', 'cries', 'facial expression of discomfort', Crohnbach's α 0.65). The mean score on the components 'tension' and 'well-being' increased significantly with increasing severity levels of dementia. Three components of quality of life (qol) were identified. Qol decreased with increasing severity of dementia. © 2013 S. Karger AG, Basel.

Principal component analysis of the CT density histogram to generate parametric response maps of COPD

Science.gov (United States)

Zha, N.; Capaldi, D. P. I.; Pike, D.; McCormack, D. G.; Cunningham, I. A.; Parraga, G.

2015-03-01

Pulmonary x-ray computed tomography (CT) may be used to characterize emphysema and airways disease in patients with chronic obstructive pulmonary disease (COPD). One analysis approach - parametric response mapping (PMR) utilizes registered inspiratory and expiratory CT image volumes and CT-density-histogram thresholds, but there is no consensus regarding the threshold values used, or their clinical meaning. Principal-component-analysis (PCA) of the CT density histogram can be exploited to quantify emphysema using data-driven CT-density-histogram thresholds. Thus, the objective of this proof-of-concept demonstration was to develop a PRM approach using PCA-derived thresholds in COPD patients and ex-smokers without airflow limitation. Methods: Fifteen COPD ex-smokers and 5 normal ex-smokers were evaluated. Thoracic CT images were also acquired at full inspiration and full expiration and these images were non-rigidly co-registered. PCA was performed for the CT density histograms, from which the components with the highest eigenvalues greater than one were summed. Since the values of the principal component curve correlate directly with the variability in the sample, the maximum and minimum points on the curve were used as threshold values for the PCA-adjusted PRM technique. Results: A significant correlation was determined between conventional and PCA-adjusted PRM with 3He MRI apparent diffusion coefficient (p<0.001), with CT RA950 (p<0.0001), as well as with 3He MRI ventilation defect percent, a measurement of both small airways disease (p=0.049 and p=0.06, respectively) and emphysema (p=0.02). Conclusions: PRM generated using PCA thresholds of the CT density histogram showed significant correlations with CT and 3He MRI measurements of emphysema, but not airways disease.

Principal Components Analysis on the spectral Bidirectional Reflectance Distribution Function of ceramic colour standards.

Science.gov (United States)

Ferrero, A; Campos, J; Rabal, A M; Pons, A; Hernanz, M L; Corróns, A

2011-09-26

The Bidirectional Reflectance Distribution Function (BRDF) is essential to characterize an object's reflectance properties. This function depends both on the various illumination-observation geometries as well as on the wavelength. As a result, the comprehensive interpretation of the data becomes rather complex. In this work we assess the use of the multivariable analysis technique of Principal Components Analysis (PCA) applied to the experimental BRDF data of a ceramic colour standard. It will be shown that the result may be linked to the various reflection processes occurring on the surface, assuming that the incoming spectral distribution is affected by each one of these processes in a specific manner. Moreover, this procedure facilitates the task of interpolating a series of BRDF measurements obtained for a particular sample. © 2011 Optical Society of America

A hybrid symplectic principal component analysis and central tendency measure method for detection of determinism in noisy time series with application to mechanomyography.

Science.gov (United States)

Xie, Hong-Bo; Dokos, Socrates

2013-06-01

We present a hybrid symplectic geometry and central tendency measure (CTM) method for detection of determinism in noisy time series. CTM is effective for detecting determinism in short time series and has been applied in many areas of nonlinear analysis. However, its performance significantly degrades in the presence of strong noise. In order to circumvent this difficulty, we propose to use symplectic principal component analysis (SPCA), a new chaotic signal de-noising method, as the first step to recover the system dynamics. CTM is then applied to determine whether the time series arises from a stochastic process or has a deterministic component. Results from numerical experiments, ranging from six benchmark deterministic models to 1/f noise, suggest that the hybrid method can significantly improve detection of determinism in noisy time series by about 20 dB when the data are contaminated by Gaussian noise. Furthermore, we apply our algorithm to study the mechanomyographic (MMG) signals arising from contraction of human skeletal muscle. Results obtained from the hybrid symplectic principal component analysis and central tendency measure demonstrate that the skeletal muscle motor unit dynamics can indeed be deterministic, in agreement with previous studies. However, the conventional CTM method was not able to definitely detect the underlying deterministic dynamics. This result on MMG signal analysis is helpful in understanding neuromuscular control mechanisms and developing MMG-based engineering control applications.

Diagnosing basal cell carcinoma in vivo by near-infrared Raman spectroscopy: a Principal Components Analysis discrimination algorithm

Science.gov (United States)

Silveira, Landulfo, Jr.; Silveira, Fabrício L.; Bodanese, Benito; Pacheco, Marcos Tadeu T.; Zângaro, Renato A.

2012-02-01

This work demonstrated the discrimination among basal cell carcinoma (BCC) and normal human skin in vivo using near-infrared Raman spectroscopy. Spectra were obtained in the suspected lesion prior resectional surgery. After tissue withdrawn, biopsy fragments were submitted to histopathology. Spectra were also obtained in the adjacent, clinically normal skin. Raman spectra were measured using a Raman spectrometer (830 nm) with a fiber Raman probe. By comparing the mean spectra of BCC with the normal skin, it has been found important differences in the 800-1000 cm-1 and 1250-1350 cm-1 (vibrations of C-C and amide III, respectively, from lipids and proteins). A discrimination algorithm based on Principal Components Analysis and Mahalanobis distance (PCA/MD) could discriminate the spectra of both tissues with high sensitivity and specificity.

Principal Component Surface (2011) for St. Thomas East End Reserve, St. Thomas

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This image represents a 0.3x0.3 meter principal component analysis (PCA) surface for areas the St. Thomas East End Reserve (STEER) in the U.S. Virgin Islands (USVI)....

Evaluation of functional scintigraphy of gastric emptying by the principal component method

Energy Technology Data Exchange (ETDEWEB)

Haeussler, M.; Eilles, C.; Reiners, C.; Moll, E.; Boerner, W.

1980-10-01

Gastric emptying of a standard semifluid test-meal, labeled with /sup 99/sup(m)Tc-DTPA, was studied by functional scintigraphy in 88 subjects (normals, patients with duodenal and gastric ulcer before and after selective proximal vagotomy with and without pyloroplasty). Gastric emptying curves were analysed by the method of principal components. Patients after selective proximal vagotomy with pyloroplasty showed an rapid initial emptying, whereas this was a rare finding in patients after selective proximal vagotomy without pyloroplasty. The method of principal components is well suited for mathematical analysis of gastric emptying; nevertheless the results are difficult to interpret. The method has advantages when looking at larger collectives and allows a separation into groups with different gastric emptying.

Using principal component analysis and annual seasonal trend analysis to assess karst rocky desertification in southwestern China.

Science.gov (United States)

Zhang, Zhiming; Ouyang, Zhiyun; Xiao, Yi; Xiao, Yang; Xu, Weihua

2017-06-01

Increasing exploitation of karst resources is causing severe environmental degradation because of the fragility and vulnerability of karst areas. By integrating principal component analysis (PCA) with annual seasonal trend analysis (ASTA), this study assessed karst rocky desertification (KRD) within a spatial context. We first produced fractional vegetation cover (FVC) data from a moderate-resolution imaging spectroradiometer normalized difference vegetation index using a dimidiate pixel model. Then, we generated three main components of the annual FVC data using PCA. Subsequently, we generated the slope image of the annual seasonal trends of FVC using median trend analysis. Finally, we combined the three PCA components and annual seasonal trends of FVC with the incidence of KRD for each type of carbonate rock to classify KRD into one of four categories based on K-means cluster analysis: high, moderate, low, and none. The results of accuracy assessments indicated that this combination approach produced greater accuracy and more reasonable KRD mapping than the average FVC based on the vegetation coverage standard. The KRD map for 2010 indicated that the total area of KRD was 78.76 × 10 3  km 2 , which constitutes about 4.06% of the eight southwest provinces of China. The largest KRD areas were found in Yunnan province. The combined PCA and ASTA approach was demonstrated to be an easily implemented, robust, and flexible method for the mapping and assessment of KRD, which can be used to enhance regional KRD management schemes or to address assessment of other environmental issues.

Resource Loss and Depressive Symptoms Following Hurricane Katrina: A Principal Component Regression Study

OpenAIRE

Liang L; Hayashi K; Bennett P; Johnson T. J; Aten J. D

2015-01-01

To understand the relationship between the structure of resource loss and depression after disaster exposure, the components of resource loss and the impact of these resource loss components on depression was examined among college students (N=654) at two universities who were affected by Hurricane Katrina. The component of resource loss was analyzed by principal component analysis first. Gender, social relationship loss, and financial loss were then examined with the regression model on depr...

Evaluation of Staining-Dependent Colour Changes in Resin Composites Using Principal Component Analysis.

Science.gov (United States)

Manojlovic, D; Lenhardt, L; Milićević, B; Antonov, M; Miletic, V; Dramićanin, M D

2015-10-09

Colour changes in Gradia Direct™ composite after immersion in tea, coffee, red wine, Coca-Cola, Colgate mouthwash, and distilled water were evaluated using principal component analysis (PCA) and the CIELAB colour coordinates. The reflection spectra of the composites were used as input data for the PCA. The output data (scores and loadings) provided information about the magnitude and origin of the surface reflection changes after exposure to the staining solutions. The reflection spectra of the stained samples generally exhibited lower reflection in the blue spectral range, which was manifested in the lower content of the blue shade for the samples. Both analyses demonstrated the high staining abilities of tea, coffee, and red wine, which produced total colour changes of 4.31, 6.61, and 6.22, respectively, according to the CIELAB analysis. PCA revealed subtle changes in the reflection spectra of composites immersed in Coca-Cola, demonstrating Coca-Cola's ability to stain the composite to a small degree.

Association test based on SNP set: logistic kernel machine based test vs. principal component analysis.

Directory of Open Access Journals (Sweden)

Yang Zhao

Full Text Available GWAS has facilitated greatly the discovery of risk SNPs associated with complex diseases. Traditional methods analyze SNP individually and are limited by low power and reproducibility since correction for multiple comparisons is necessary. Several methods have been proposed based on grouping SNPs into SNP sets using biological knowledge and/or genomic features. In this article, we compare the linear kernel machine based test (LKM and principal components analysis based approach (PCA using simulated datasets under the scenarios of 0 to 3 causal SNPs, as well as simple and complex linkage disequilibrium (LD structures of the simulated regions. Our simulation study demonstrates that both LKM and PCA can control the type I error at the significance level of 0.05. If the causal SNP is in strong LD with the genotyped SNPs, both the PCA with a small number of principal components (PCs and the LKM with kernel of linear or identical-by-state function are valid tests. However, if the LD structure is complex, such as several LD blocks in the SNP set, or when the causal SNP is not in the LD block in which most of the genotyped SNPs reside, more PCs should be included to capture the information of the causal SNP. Simulation studies also demonstrate the ability of LKM and PCA to combine information from multiple causal SNPs and to provide increased power over individual SNP analysis. We also apply LKM and PCA to analyze two SNP sets extracted from an actual GWAS dataset on non-small cell lung cancer.

Principal component structure and sport-specific differences in the running one-leg vertical jump.

Science.gov (United States)

Laffaye, G; Bardy, B G; Durey, A

2007-05-01

The aim of this study is to identify the kinetic principal components involved in one-leg running vertical jumps, as well as the potential differences between specialists from different sports. The sample was composed of 25 regional skilled athletes who play different jumping sports (volleyball players, handball players, basketball players, high jumpers and novices), who performed a running one-leg jump. A principal component analysis was performed on the data obtained from the 200 tested jumps in order to identify the principal components summarizing the six variables extracted from the force-time curve. Two principal components including six variables accounted for 78 % of the variance in jump height. Running one-leg vertical jump performance was predicted by a temporal component (that brings together impulse time, eccentric time and vertical displacement of the center of mass) and a force component (who brings together relative peak of force and power, and rate of force development). A comparison made among athletes revealed a temporal-prevailing profile for volleyball players, and a force-dominant profile for Fosbury high jumpers. Novices showed an ineffective utilization of the force component, while handball and basketball players showed heterogeneous and neutral component profiles. Participants will use a jumping strategy in which variables related to either the magnitude or timing of force production will be closely coupled; athletes from different sporting backgrounds will use a jumping strategy that reflects the inherent demands of their chosen sport.

Combining multiple regression and principal component analysis for accurate predictions for column ozone in Peninsular Malaysia

Science.gov (United States)

Rajab, Jasim M.; MatJafri, M. Z.; Lim, H. S.

2013-06-01

This study encompasses columnar ozone modelling in the peninsular Malaysia. Data of eight atmospheric parameters [air surface temperature (AST), carbon monoxide (CO), methane (CH4), water vapour (H2Ovapour), skin surface temperature (SSKT), atmosphere temperature (AT), relative humidity (RH), and mean surface pressure (MSP)] data set, retrieved from NASA's Atmospheric Infrared Sounder (AIRS), for the entire period (2003-2008) was employed to develop models to predict the value of columnar ozone (O3) in study area. The combined method, which is based on using both multiple regressions combined with principal component analysis (PCA) modelling, was used to predict columnar ozone. This combined approach was utilized to improve the prediction accuracy of columnar ozone. Separate analysis was carried out for north east monsoon (NEM) and south west monsoon (SWM) seasons. The O3 was negatively correlated with CH4, H2Ovapour, RH, and MSP, whereas it was positively correlated with CO, AST, SSKT, and AT during both the NEM and SWM season periods. Multiple regression analysis was used to fit the columnar ozone data using the atmospheric parameter's variables as predictors. A variable selection method based on high loading of varimax rotated principal components was used to acquire subsets of the predictor variables to be comprised in the linear regression model of the atmospheric parameter's variables. It was found that the increase in columnar O3 value is associated with an increase in the values of AST, SSKT, AT, and CO and with a drop in the levels of CH4, H2Ovapour, RH, and MSP. The result of fitting the best models for the columnar O3 value using eight of the independent variables gave about the same values of the R (≈0.93) and R2 (≈0.86) for both the NEM and SWM seasons. The common variables that appeared in both regression equations were SSKT, CH4 and RH, and the principal precursor of the columnar O3 value in both the NEM and SWM seasons was SSKT.

Characteristic gene selection via weighting principal components by singular values.

Directory of Open Access Journals (Sweden)

Jin-Xing Liu

Full Text Available Conventional gene selection methods based on principal component analysis (PCA use only the first principal component (PC of PCA or sparse PCA to select characteristic genes. These methods indeed assume that the first PC plays a dominant role in gene selection. However, in a number of cases this assumption is not satisfied, so the conventional PCA-based methods usually provide poor selection results. In order to improve the performance of the PCA-based gene selection method, we put forward the gene selection method via weighting PCs by singular values (WPCS. Because different PCs have different importance, the singular values are exploited as the weights to represent the influence on gene selection of different PCs. The ROC curves and AUC statistics on artificial data show that our method outperforms the state-of-the-art methods. Moreover, experimental results on real gene expression data sets show that our method can extract more characteristic genes in response to abiotic stresses than conventional gene selection methods.

An Investigation of Potential Fraud in Commercial Orange Juice Products in Malaysian Market by Cluster Analysis and Principal Component Analysis

International Nuclear Information System (INIS)

Keng, S.E.; Abbas Fadhl Mubarek Al-Karkhi; Mohd Khairuddin Mohd Talib; Azhar Mat Easa; Hoong, C.L.

2015-01-01

This study was triggered by Malaysia Ministry of Health to monitor quality of commercial orange juice products sold in Malaysia market. A total of 19 orange juice samples from 14 different brands of packed orange juice products and 5 different brands of fresh orange fruit juices were analyzed for total soluble solids content, total titratable acidity, sugar composition and amino acid profiles. Hierarchical Cluster analysis (HCA) and Principal component analysis (PCA) on amino acid composition alone allowed visual discrimination between fresh squeezed orange juices and commercial packed orange juices. Suspicion of mislabel was raised in cases of miss-classification. (author)

Design and validation of a morphing myoelectric hand posture controller based on principal component analysis of human grasping.

Science.gov (United States)

Segil, Jacob L; Weir, Richard F ff

2014-03-01

An ideal myoelectric prosthetic hand should have the ability to continuously morph between any posture like an anatomical hand. This paper describes the design and validation of a morphing myoelectric hand controller based on principal component analysis of human grasping. The controller commands continuously morphing hand postures including functional grasps using between two and four surface electromyography (EMG) electrodes pairs. Four unique maps were developed to transform the EMG control signals in the principal component domain. A preliminary validation experiment was performed by 10 nonamputee subjects to determine the map with highest performance. The subjects used the myoelectric controller to morph a virtual hand between functional grasps in a series of randomized trials. The number of joints controlled accurately was evaluated to characterize the performance of each map. Additional metrics were studied including completion rate, time to completion, and path efficiency. The highest performing map controlled over 13 out of 15 joints accurately.

Using the Cluster Analysis and the Principal Component Analysis in Evaluating the Quality of a Destination

Directory of Open Access Journals (Sweden)

Ida Vajčnerová

2016-01-01

Full Text Available The objective of the paper is to explore possibilities of evaluating the quality of a tourist destination by means of the principal components analysis (PCA and the cluster analysis. In the paper both types of analysis are compared on the basis of the results they provide. The aim is to identify advantage and limits of both methods and provide methodological suggestion for their further use in the tourism research. The analyses is based on the primary data from the customers’ satisfaction survey with the key quality factors of a destination. As output of the two statistical methods is creation of groups or cluster of quality factors that are similar in terms of respondents’ evaluations, in order to facilitate the evaluation of the quality of tourist destinations. Results shows the possibility to use both tested methods. The paper is elaborated in the frame of wider research project aimed to develop a methodology for the quality evaluation of tourist destinations, especially in the context of customer satisfaction and loyalty.

Local Prediction Models on Mid-Atlantic Ridge MORB by Principal Component Regression

Science.gov (United States)

Ling, X.; Snow, J. E.; Chin, W.

2017-12-01

The isotopic compositions of the daughter isotopes of long-lived radioactive systems (Sr, Nd, Hf and Pb ) can be used to map the scale and history of mantle heterogeneities beneath mid-ocean ridges. Our goal is to relate the multidimensional structure in the existing isotopic dataset with an underlying physical reality of mantle sources. The numerical technique of Principal Component Analysis is useful to reduce the linear dependence of the data to a minimum set of orthogonal eigenvectors encapsulating the information contained (cf Agranier et al 2005). The dataset used for this study covers almost all the MORBs along mid-Atlantic Ridge (MAR), from 54oS to 77oN and 8.8oW to -46.7oW, including replicating the dataset of Agranier et al., 2005 published plus 53 basalt samples dredged and analyzed since then (data from PetDB). The principal components PC1 and PC2 account for 61.56% and 29.21%, respectively, of the total isotope ratios variability. The samples with similar compositions to HIMU and EM and DM are identified to better understand the PCs. PC1 and PC2 are accountable for HIMU and EM whereas PC2 has limited control over the DM source. PC3 is more strongly controlled by the depleted mantle source than PC2. What this means is that all three principal components have a high degree of significance relevant to the established mantle sources. We also tested the relationship between mantle heterogeneity and sample locality. K-means clustering algorithm is a type of unsupervised learning to find groups in the data based on feature similarity. The PC factor scores of each sample are clustered into three groups. Cluster one and three are alternating on the north and south MAR. Cluster two exhibits on 45.18oN to 0.79oN and -27.9oW to -30.40oW alternating with cluster one. The ridge has been preliminarily divided into 16 sections considering both the clusters and ridge segments. The principal component regression models the section based on 6 isotope ratios and PCs. The

Proteome comparison for discrimination between honeydew and floral honeys from botanical species Mimosa scabrella Bentham by principal component analysis.

Science.gov (United States)

Azevedo, Mônia Stremel; Valentim-Neto, Pedro Alexandre; Seraglio, Siluana Katia Tischer; da Luz, Cynthia Fernandes Pinto; Arisi, Ana Carolina Maisonnave; Costa, Ana Carolina Oliveira

2017-10-01

Due to the increasing valuation and appreciation of honeydew honey in many European countries and also to existing contamination among different types of honeys, authentication is an important aspect of quality control with regard to guaranteeing the origin in terms of source (honeydew or floral) and needs to be determined. Furthermore, proteins are minor components of the honey, despite the importance of their physiological effects, and can differ according to the source of the honey. In this context, the aims of this study were to carry out protein extraction from honeydew and floral honeys and to discriminate these honeys from the same botanical species, Mimosa scabrella Bentham, through proteome comparison using two-dimensional gel electrophoresis and principal component analysis. The results showed that the proteome profile and principal component analysis can be a useful tool for discrimination between these types of honey using matched proteins (45 matched spots). Also, the proteome profile showed 160 protein spots in honeydew honey and 84 spots in the floral honey. The protein profile can be a differential characteristic of this type of honey, in view of the importance of proteins as bioactive compounds in honey. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

MUSIC-CONTENT-ADAPTIVE ROBUST PRINCIPAL COMPONENT ANALYSIS FOR A SEMANTICALLY CONSISTENT SEPARATION OF FOREGROUND AND BACKGROUND IN MUSIC AUDIO SIGNALS

OpenAIRE

Papadopoulos , Hélène; Ellis , Daniel P.W.

2014-01-01

International audience; Robust Principal Component Analysis (RPCA) is a technique to decompose signals into sparse and low rank components, and has recently drawn the attention of the MIR field for the problem of separating leading vocals from accompaniment, with appealing re-sults obtained on small excerpts of music. However, the perfor-mance of the method drops when processing entire music tracks. We present an adaptive formulation of RPCA that incorporates music content information to guid...

State and group dynamics of world stock market by principal component analysis

Science.gov (United States)

Nobi, Ashadun; Lee, Jae Woo

2016-05-01

We study the dynamic interactions and structural changes by a principal component analysis (PCA) to cross-correlation coefficients of global financial indices in the years 1998-2012. The variances explained by the first PC increase with time and show a drastic change during the crisis. A sharp change in PC coefficient implies a transition of market state, a situation which occurs frequently in the American and Asian indices. However, the European indices remain stable over time. Using the first two PC coefficients, we identify indices that are similar and more strongly correlated than the others. We observe that the European indices form a robust group over the observation period. The dynamics of the individual indices within the group increase in similarity with time, and the dynamics of indices are more similar during the crises. Furthermore, the group formation of indices changes position in two-dimensional spaces due to crises. Finally, after a financial crisis, the difference of PCs between the European and American indices narrows.

INDIA’S ELECTRICITY DEMAND FORECAST USING REGRESSION ANALYSIS AND ARTIFICIAL NEURAL NETWORKS BASED ON PRINCIPAL COMPONENTS

Directory of Open Access Journals (Sweden)

S. Saravanan

2012-07-01

Full Text Available Power System planning starts with Electric load (demand forecasting. Accurate electricity load forecasting is one of the most important challenges in managing supply and demand of the electricity, since the electricity demand is volatile in nature; it cannot be stored and has to be consumed instantly. The aim of this study deals with electricity consumption in India, to forecast future projection of demand for a period of 19 years from 2012 to 2030. The eleven input variables used are Amount of CO2 emission, Population, Per capita GDP, Per capita gross national income, Gross Domestic savings, Industry, Consumer price index, Wholesale price index, Imports, Exports and Per capita power consumption. A new methodology based on Artificial Neural Networks (ANNs using principal components is also used. Data of 29 years used for training and data of 10 years used for testing the ANNs. Comparison made with multiple linear regression (based on original data and the principal components and ANNs with original data as input variables. The results show that the use of ANNs with principal components (PC is more effective.

Performance assessment of air quality monitoring networks using principal component analysis and cluster analysis

International Nuclear Information System (INIS)

Lu, Wei-Zhen; He, Hong-Di; Dong, Li-yun

2011-01-01

This study aims to evaluate the performance of two statistical methods, principal component analysis and cluster analysis, for the management of air quality monitoring network of Hong Kong and the reduction of associated expenses. The specific objectives include: (i) to identify city areas with similar air pollution behavior; and (ii) to locate emission sources. The statistical methods were applied to the mass concentrations of sulphur dioxide (SO 2 ), respirable suspended particulates (RSP) and nitrogen dioxide (NO 2 ), collected in monitoring network of Hong Kong from January 2001 to December 2007. The results demonstrate that, for each pollutant, the monitoring stations are grouped into different classes based on their air pollution behaviors. The monitoring stations located in nearby area are characterized by the same specific air pollution characteristics and suggested with an effective management of air quality monitoring system. The redundant equipments should be transferred to other monitoring stations for allowing further enlargement of the monitored area. Additionally, the existence of different air pollution behaviors in the monitoring network is explained by the variability of wind directions across the region. The results imply that the air quality problem in Hong Kong is not only a local problem mainly from street-level pollutions, but also a region problem from the Pearl River Delta region. (author)

Detecting Market Transitions and Energy Futures Risk Management Using Principal Components

NARCIS (Netherlands)

Borovkova, S.A.

2006-01-01

An empirical approach to analysing the forward curve dynamics of energy futures is presented. For non-seasonal commodities-such as crude oil-the forward curve is well described by the first three principal components: the level, slope and curvature. A principal component indicator is described that

Application of Principal Component Analysis (PCA) to Reduce Multicollinearity Exchange Rate Currency of Some Countries in Asia Period 2004-2014

Science.gov (United States)

Rahayu, Sri; Sugiarto, Teguh; Madu, Ludiro; Holiawati; Subagyo, Ahmad

2017-01-01

This study aims to apply the model principal component analysis to reduce multicollinearity on variable currency exchange rate in eight countries in Asia against US Dollar including the Yen (Japan), Won (South Korea), Dollar (Hong Kong), Yuan (China), Bath (Thailand), Rupiah (Indonesia), Ringgit (Malaysia), Dollar (Singapore). It looks at yield…

Post annealing performance evaluation of printable interdigital capacitive sensors by principal component analysis

KAUST Repository

Zia, Asif Iqbal

2015-06-01

The surface roughness of thin-film gold electrodes induces instability in impedance spectroscopy measurements of capacitive interdigital printable sensors. Post-fabrication thermodynamic annealing was carried out at temperatures ranging from 30 °C to 210 °C in a vacuum oven and the variation in surface morphology of thin-film gold electrodes was observed by scanning electron microscopy. Impedance spectra obtained at different temperatures were translated into equivalent circuit models by applying complex nonlinear least square curve-fitting algorithm. Principal component analysis was applied to deduce the classification of the parameters affected due to the annealing process and to evaluate the performance stability using mathematical model. Physics of the thermodynamic annealing was discussed based on the surface activation energies. The post anneal testing of the sensors validated the achieved stability in impedance measurement. © 2001-2012 IEEE.

Post annealing performance evaluation of printable interdigital capacitive sensors by principal component analysis

KAUST Repository

Zia, Asif Iqbal; Mukhopadhyay, Subhas Chandra; Yu, Paklam; Al-Bahadly, Ibrahim H.; Gooneratne, Chinthaka Pasan; Kosel, Jü rgen

2015-01-01

The surface roughness of thin-film gold electrodes induces instability in impedance spectroscopy measurements of capacitive interdigital printable sensors. Post-fabrication thermodynamic annealing was carried out at temperatures ranging from 30 °C to 210 °C in a vacuum oven and the variation in surface morphology of thin-film gold electrodes was observed by scanning electron microscopy. Impedance spectra obtained at different temperatures were translated into equivalent circuit models by applying complex nonlinear least square curve-fitting algorithm. Principal component analysis was applied to deduce the classification of the parameters affected due to the annealing process and to evaluate the performance stability using mathematical model. Physics of the thermodynamic annealing was discussed based on the surface activation energies. The post anneal testing of the sensors validated the achieved stability in impedance measurement. © 2001-2012 IEEE.

Improving power output of inertial energy harvesters by employing principal component analysis of input acceleration

Science.gov (United States)

Smilek, Jan; Hadas, Zdenek

2017-02-01

In this paper we propose the use of principal component analysis to process the measured acceleration data in order to determine the direction of acceleration with the highest variance on given frequency of interest. This method can be used for improving the power generated by inertial energy harvesters. Their power output is highly dependent on the excitation acceleration magnitude and frequency, but the axes of acceleration measurements might not always be perfectly aligned with the directions of movement, and therefore the generated power output might be severely underestimated in simulations, possibly leading to false conclusions about the feasibility of using the inertial energy harvester for the examined application.

Principal variance component analysis of crop composition data: a case study on herbicide-tolerant cotton.

Science.gov (United States)

Harrison, Jay M; Howard, Delia; Malven, Marianne; Halls, Steven C; Culler, Angela H; Harrigan, George G; Wolfinger, Russell D

2013-07-03

Compositional studies on genetically modified (GM) and non-GM crops have consistently demonstrated that their respective levels of key nutrients and antinutrients are remarkably similar and that other factors such as germplasm and environment contribute more to compositional variability than transgenic breeding. We propose that graphical and statistical approaches that can provide meaningful evaluations of the relative impact of different factors to compositional variability may offer advantages over traditional frequentist testing. A case study on the novel application of principal variance component analysis (PVCA) in a compositional assessment of herbicide-tolerant GM cotton is presented. Results of the traditional analysis of variance approach confirmed the compositional equivalence of the GM and non-GM cotton. The multivariate approach of PVCA provided further information on the impact of location and germplasm on compositional variability relative to GM.

New approach based on fuzzy logic and principal component analysis for the classification of two-dimensional maps in health and disease. Application to lymphomas.

Science.gov (United States)

Marengo, Emilio; Robotti, Elisa; Righetti, Pier Giorgio; Antonucci, Francesca

2003-07-04

Two-dimensional (2D) electrophoresis is the most wide spread technique for the separation of proteins in biological systems. This technique produces 2D maps of high complexity, which creates difficulties in the comparison of different samples. The method proposed in this paper for the comparison of different 2D maps can be summarised in four steps: (a) digitalisation of the image; (b) fuzzyfication of the digitalised map in order to consider the variability of the two-dimensional electrophoretic separation; (c) decoding by principal component analysis of the previously obtained fuzzy maps, in order to reduce the system dimensionality; (d) classification analysis (linear discriminant analysis), in order to separate the samples contained in the dataset according to the classes present in said dataset. This method was applied to a dataset constituted by eight samples: four belonging to healthy human lymph-nodes and four deriving from non-Hodgkin lymphomas. The amount of fuzzyfication of the original map is governed by the sigma parameter. The larger the value, the more fuzzy theresulting transformed map. The effect of the fuzzyfication parameter was investigated, the optimal results being obtained for sigma = 1.75 and 2.25. Principal component analysis and linear discriminant analysis allowed the separation of the two classes of samples without any misclassification.

Driven Factors Analysis of China’s Irrigation Water Use Efficiency by Stepwise Regression and Principal Component Analysis

Directory of Open Access Journals (Sweden)

Renfu Jia

2016-01-01

Full Text Available This paper introduces an integrated approach to find out the major factors influencing efficiency of irrigation water use in China. It combines multiple stepwise regression (MSR and principal component analysis (PCA to obtain more realistic results. In real world case studies, classical linear regression model often involves too many explanatory variables and the linear correlation issue among variables cannot be eliminated. Linearly correlated variables will cause the invalidity of the factor analysis results. To overcome this issue and reduce the number of the variables, PCA technique has been used combining with MSR. As such, the irrigation water use status in China was analyzed to find out the five major factors that have significant impacts on irrigation water use efficiency. To illustrate the performance of the proposed approach, the calculation based on real data was conducted and the results were shown in this paper.

[Discrimination of varieties of borneol using terahertz spectra based on principal component analysis and support vector machine].

Science.gov (United States)

Li, Wu; Hu, Bing; Wang, Ming-wei

2014-12-01

In the present paper, the terahertz time-domain spectroscopy (THz-TDS) identification model of borneol based on principal component analysis (PCA) and support vector machine (SVM) was established. As one Chinese common agent, borneol needs a rapid, simple and accurate detection and identification method for its different source and being easily confused in the pharmaceutical and trade links. In order to assure the quality of borneol product and guard the consumer's right, quickly, efficiently and correctly identifying borneol has significant meaning to the production and transaction of borneol. Terahertz time-domain spectroscopy is a new spectroscopy approach to characterize material using terahertz pulse. The absorption terahertz spectra of blumea camphor, borneol camphor and synthetic borneol were measured in the range of 0.2 to 2 THz with the transmission THz-TDS. The PCA scores of 2D plots (PC1 X PC2) and 3D plots (PC1 X PC2 X PC3) of three kinds of borneol samples were obtained through PCA analysis, and both of them have good clustering effect on the 3 different kinds of borneol. The value matrix of the first 10 principal components (PCs) was used to replace the original spectrum data, and the 60 samples of the three kinds of borneol were trained and then the unknown 60 samples were identified. Four kinds of support vector machine model of different kernel functions were set up in this way. Results show that the accuracy of identification and classification of SVM RBF kernel function for three kinds of borneol is 100%, and we selected the SVM with the radial basis kernel function to establish the borneol identification model, in addition, in the noisy case, the classification accuracy rates of four SVM kernel function are above 85%, and this indicates that SVM has strong generalization ability. This study shows that PCA with SVM method of borneol terahertz spectroscopy has good classification and identification effects, and provides a new method for species

The Psychometric Assessment of Children with Learning Disabilities: An Index Derived from a Principal Components Analysis of the WISC-R.

Science.gov (United States)

Lawson, J. S.; Inglis, James

1984-01-01

A learning disability index (LDI) for the assessment of intellectual deficits on the Wechsler Intelligence Scale for Children-Revised (WISC-R) is described. The Factor II score coefficients derived from an unrotated principal components analysis of the WISC-R normative data, in combination with the individual's scaled scores, are used for this…

Use of Geochemistry Data Collected by the Mars Exploration Rover Spirit in Gusev Crater to Teach Geomorphic Zonation through Principal Components Analysis

Science.gov (United States)

Rodrigue, Christine M.

2011-01-01

This paper presents a laboratory exercise used to teach principal components analysis (PCA) as a means of surface zonation. The lab was built around abundance data for 16 oxides and elements collected by the Mars Exploration Rover Spirit in Gusev Crater between Sol 14 and Sol 470. Students used PCA to reduce 15 of these into 3 components, which,…

The Use of Principal Components in Long-Range Forecasting

Science.gov (United States)

Chern, Jonq-Gong

Large-scale modes of the global sea surface temperatures and the Northern Hemisphere tropospheric circulation are described by principal component analysis. The first and the second SST components well describe the El Nino episodes, and the El Nino index (ENI), suggested in this study, is consistent with the winter Southern Oscillation index (SOI), where this ENI is a composite component of the weighted first and second SST components. The large-scale interactive modes of the coupling ocean-atmosphere system are identified by cross-correlation analysis The result shows that the first SST component is strongly correlated with the first component of geopotential height in lead time of 6 months. In the El Nino-Southern Oscillation (ENSO) evolution, the El Nino mode strongly influences the winter tropospheric circulation in the mid -latitudes for up to three leading seasons. The regional long-range variation of climate is investigated with these major components of the SST and the tropospheric circulation. In the mid-latitude, the climate of the central United States shows a weak linkage with these large-scale circulations, and the climate of the western United States appears to be consistently associated with the ENSO modes. These El Nino modes also show a dominant influence on Eastern Asia as evidenced in Taiwan Mei-Yu patterns. Possible regional long-range forecasting schemes, utilizing the complementary characteristics of the winter El Nino mode and SST anomalies, are examined with the Taiwan Mei-Yu.

Quantifying Individual Brain Connectivity with Functional Principal Component Analysis for Networks.

Science.gov (United States)

Petersen, Alexander; Zhao, Jianyang; Carmichael, Owen; Müller, Hans-Georg

2016-09-01

In typical functional connectivity studies, connections between voxels or regions in the brain are represented as edges in a network. Networks for different subjects are constructed at a given graph density and are summarized by some network measure such as path length. Examining these summary measures for many density values yields samples of connectivity curves, one for each individual. This has led to the adoption of basic tools of functional data analysis, most commonly to compare control and disease groups through the average curves in each group. Such group differences, however, neglect the variability in the sample of connectivity curves. In this article, the use of functional principal component analysis (FPCA) is demonstrated to enrich functional connectivity studies by providing increased power and flexibility for statistical inference. Specifically, individual connectivity curves are related to individual characteristics such as age and measures of cognitive function, thus providing a tool to relate brain connectivity with these variables at the individual level. This individual level analysis opens a new perspective that goes beyond previous group level comparisons. Using a large data set of resting-state functional magnetic resonance imaging scans, relationships between connectivity and two measures of cognitive function-episodic memory and executive function-were investigated. The group-based approach was implemented by dichotomizing the continuous cognitive variable and testing for group differences, resulting in no statistically significant findings. To demonstrate the new approach, FPCA was implemented, followed by linear regression models with cognitive scores as responses, identifying significant associations of connectivity in the right middle temporal region with both cognitive scores.

Performance analysis of a Principal Component Analysis ensemble classifier for Emotiv headset P300 spellers.

Science.gov (United States)

Elsawy, Amr S; Eldawlatly, Seif; Taher, Mohamed; Aly, Gamal M

2014-01-01

The current trend to use Brain-Computer Interfaces (BCIs) with mobile devices mandates the development of efficient EEG data processing methods. In this paper, we demonstrate the performance of a Principal Component Analysis (PCA) ensemble classifier for P300-based spellers. We recorded EEG data from multiple subjects using the Emotiv neuroheadset in the context of a classical oddball P300 speller paradigm. We compare the performance of the proposed ensemble classifier to the performance of traditional feature extraction and classifier methods. Our results demonstrate the capability of the PCA ensemble classifier to classify P300 data recorded using the Emotiv neuroheadset with an average accuracy of 86.29% on cross-validation data. In addition, offline testing of the recorded data reveals an average classification accuracy of 73.3% that is significantly higher than that achieved using traditional methods. Finally, we demonstrate the effect of the parameters of the P300 speller paradigm on the performance of the method.

Principal Component Analysis of Chinese Porcelains from the Five Dynasties to the Qing Dynasty

Science.gov (United States)

Yap, C. T.; Hua, Younan

1992-10-01

This is a study of the possibility of identifying antique Chinese porcelains according to the period or dynasty, using major and minor chemical components (SiO2 , Al2O3 , Fe2O3 , K2O, Na2O, CaO and MgO) from the body of the porcelain. Principal component analysis is applied to published data on 66 pieces of Chinese procelains made in Jingdezhen during the Five Dynasties and the Song, Yuan, Ming and Qing Dynasties. It is shown that porcelains made during the Five Dynasties and the Yuan (or Ming) and Qing Dynasties can be segregated completely without any overlap. However, there is appreciable overlap between the Five Dynasties and the Song Dynasty, some overlap between the Song and Ming Dynasties and also between the Yuan and Ming Dynasties. Interestingly, Qing procelains are well separated from all the others. The percentage of silica in the porcelain body decreases and that of alumina increases with recentness with the exception of the Yuan and Ming Dynasties, where this trend is reversed.

Análisis de componentes principales funcionales en series de tiempo económicas (Analysis of principal functional components in economic time series

Directory of Open Access Journals (Sweden)

Cristina O. Chávez Chong

2015-12-01

Full Text Available Spanis abstract. El análisis de datos funcionales ha cobrado gran relevancia en los últimos años, convirtiéndose en un importante campo de investigación en la Estadística. El primer método considerado para procesar este tipo de datos fue el de las componentes principales. En este trabajo se considera la extensión del método de las componentes principales clásicas (ACP al caso funcional (ACPF, algunas propiedades interesantes que aparecen y otras que se conservan al realizar dicha extensión, así como su aplicación el procesamiento de datos reales económicos y una breve explicación de algunas bibliotecas que realizan el análisis de componentes principales funcionales. English abstract. The functional data analysis has gained relevance over the last years becoming an important statistics investigation field. The first method used to process this data type was the principal components analysis (PCA. In this paper, an extension of the classical principal components analysis (PCA to the functional method (FPCA is considered, as well as some interesting properties that appear and others that remain with it. Furthermore, its application in the processing of real economic data and some previous work that analyze functional principal components are explained.

Impact of Autocorrelation on Principal Components and Their Use in Statistical Process Control

DEFF Research Database (Denmark)

Vanhatalo, Erik; Kulahci, Murat

2015-01-01

A basic assumption when using principal component analysis (PCA) for inferential purposes, such as in statistical process control (SPC), is that the data are independent in time. In many industrial processes, frequent sampling and process dynamics make this assumption unrealistic rendering sampled...

A principal components analysis of the factors effecting personal exposure to air pollution in urban commuters in Dublin, Ireland.

Science.gov (United States)

McNabola, Aonghus; Broderick, Brian M; Gill, Laurence W

2009-10-01

Principal component analysis was used to examine air pollution personal exposure data of four urban commuter transport modes for their interrelationships between pollutants and relationships with traffic and meteorological data. Air quality samples of PM2.5 and VOCs were recorded during peak traffic congestion for the car, bus, cyclist and pedestrian between January 2005 and June 2006 on a busy route in Dublin, Ireland. In total, 200 personal exposure samples were recorded each comprising 17 variables describing the personal exposure concentrations, meteorological conditions and traffic conditions. The data reduction technique, principal component analysis (PCA), was used to create weighted linear combinations of the data and these were subsequently examined for interrelationships between the many variables recorded. The results of the PCA found that personal exposure concentrations in non-motorised forms of transport were influenced to a higher degree by wind speed, whereas personal exposure concentrations in motorised forms of transport were influenced to a higher degree by traffic congestion. The findings of the investigation show that the most effective mechanisms of personal exposure reduction differ between motorised and non-motorised modes of commuter transport.

Rationalization of paclitaxel insensitivity of yeast β-tubulin and human βIII-tubulin isotype using principal component analysis

Directory of Open Access Journals (Sweden)

Das Lalita

2012-08-01

Full Text Available Abstract Background The chemotherapeutic agent paclitaxel arrests cell division by binding to the hetero-dimeric protein tubulin. Subtle differences in tubulin sequences, across eukaryotes and among β-tubulin isotypes, can have profound impact on paclitaxel-tubulin binding. To capture the experimentally observed paclitaxel-resistance of human βIII tubulin isotype and yeast β-tubulin, within a common theoretical framework, we have performed structural principal component analyses of β-tubulin sequences across eukaryotes. Results The paclitaxel-resistance of human βIII tubulin isotype and yeast β-tubulin uniquely mapped on to the lowest two principal components, defining the paclitaxel-binding site residues of β-tubulin. The molecular mechanisms behind paclitaxel-resistance, mediated through key residues, were identified from structural consequences of characteristic mutations that confer paclitaxel-resistance. Specifically, Ala277 in βIII isotype was shown to be crucial for paclitaxel-resistance. Conclusions The present analysis captures the origin of two apparently unrelated events, paclitaxel-insensitivity of yeast tubulin and human βIII tubulin isotype, through two common collective sequence vectors.

Application of principal component and factor analyses in electron spectroscopy

International Nuclear Information System (INIS)

Siuda, R.; Balcerowska, G.

1998-01-01

Fundamentals of two methods, taken from multivariate analysis and known as principal component analysis (PCA) and factor analysis (FA), are presented. Both methods are well known in chemometrics. Since 1979, when application of the methods to electron spectroscopy was reported for the first time, they became to be more and more popular in different branches of electron spectroscopy. The paper presents examples of standard applications of the method of Auger electron spectroscopy (AES), X-ray photoelectron spectroscopy (XPS), and electron energy loss spectroscopy (EELS). Advantages one can take from application of the methods, their potentialities as well as their limitations are pointed out. (author)

An improved principal component analysis based region matching method for fringe direction estimation

Science.gov (United States)

He, A.; Quan, C.

2018-04-01

The principal component analysis (PCA) and region matching combined method is effective for fringe direction estimation. However, its mask construction algorithm for region matching fails in some circumstances, and the algorithm for conversion of orientation to direction in mask areas is computationally-heavy and non-optimized. We propose an improved PCA based region matching method for the fringe direction estimation, which includes an improved and robust mask construction scheme, and a fast and optimized orientation-direction conversion algorithm for the mask areas. Along with the estimated fringe direction map, filtered fringe pattern by automatic selective reconstruction modification and enhanced fast empirical mode decomposition (ASRm-EFEMD) is used for Hilbert spiral transform (HST) to demodulate the phase. Subsequently, windowed Fourier ridge (WFR) method is used for the refinement of the phase. The robustness and effectiveness of proposed method are demonstrated by both simulated and experimental fringe patterns.

A Blind Adaptive Color Image Watermarking Scheme Based on Principal Component Analysis, Singular Value Decomposition and Human Visual System

Directory of Open Access Journals (Sweden)

M. Imran

2017-09-01

Full Text Available A blind adaptive color image watermarking scheme based on principal component analysis, singular value decomposition, and human visual system is proposed. The use of principal component analysis to decorrelate the three color channels of host image, improves the perceptual quality of watermarked image. Whereas, human visual system and fuzzy inference system helped to improve both imperceptibility and robustness by selecting adaptive scaling factor, so that, areas more prone to noise can be added with more information as compared to less prone areas. To achieve security, location of watermark embedding is kept secret and used as key at the time of watermark extraction, whereas, for capacity both singular values and vectors are involved in watermark embedding process. As a result, four contradictory requirements; imperceptibility, robustness, security and capacity are achieved as suggested by results. Both subjective and objective methods are acquired to examine the performance of proposed schemes. For subjective analysis the watermarked images and watermarks extracted from attacked watermarked images are shown. For objective analysis of proposed scheme in terms of imperceptibility, peak signal to noise ratio, structural similarity index, visual information fidelity and normalized color difference are used. Whereas, for objective analysis in terms of robustness, normalized correlation, bit error rate, normalized hamming distance and global authentication rate are used. Security is checked by using different keys to extract the watermark. The proposed schemes are compared with state-of-the-art watermarking techniques and found better performance as suggested by results.

Use of principal components analysis and three-dimensional atmospheric-transport models for reactor-consequence evaluation

International Nuclear Information System (INIS)

Gudiksen, P.H.; Walton, J.J.; Alpert, D.J.; Johnson, J.D.

1982-01-01

This work explores the use of principal components analysis coupled to three-dimensional atmospheric transport and dispersion models for evaluating the environmental consequences of reactor accidents. This permits the inclusion of meteorological data from multiple sites and the effects of topography in the consequence evaluation; features not normally included in such analyses. The technique identifies prevailing regional wind patterns and their frequencies for use in the transport and dispersion calculations. Analysis of a hypothetical accident scenario involving a release of radioactivity from a reactor situated in a river valley indicated the technique is quite useful whenever recurring wind patterns exist, as is often the case in complex terrain situations. Considerable differences were revealed in a comparison with results obtained from a more conventional Gaussian plume model using only the reactor site meteorology and no topographic effects

Lost-in-Space Star Identification Using Planar Triangle Principal Component Analysis Algorithm

Directory of Open Access Journals (Sweden)

Fuqiang Zhou

2015-01-01

Full Text Available It is a challenging task for a star sensor to implement star identification and determine the attitude of a spacecraft in the lost-in-space mode. Several algorithms based on triangle method are proposed for star identification in this mode. However, these methods hold great time consumption and large guide star catalog memory size. The star identification performance of these methods requires improvements. To address these problems, a star identification algorithm using planar triangle principal component analysis is presented here. A star pattern is generated based on the planar triangle created by stars within the field of view of a star sensor and the projection of the triangle. Since a projection can determine an index for a unique triangle in the catalog, the adoption of the k-vector range search technique makes this algorithm very fast. In addition, a sharing star validation method is constructed to verify the identification results. Simulation results show that the proposed algorithm is more robust than the planar triangle and P-vector algorithms under the same conditions.

Cluster and principal component analysis based on SSR markers of Amomum tsao-ko in Jinping County of Yunnan Province

Science.gov (United States)

Ma, Mengli; Lei, En; Meng, Hengling; Wang, Tiantao; Xie, Linyan; Shen, Dong; Xianwang, Zhou; Lu, Bingyue

2017-08-01

Amomum tsao-ko is a commercial plant that used for various purposes in medicinal and food industries. For the present investigation, 44 germplasm samples were collected from Jinping County of Yunnan Province. Clusters analysis and 2-dimensional principal component analysis (PCA) was used to represent the genetic relations among Amomum tsao-ko by using simple sequence repeat (SSR) markers. Clustering analysis clearly distinguished the samples groups. Two major clusters were formed; first (Cluster I) consisted of 34 individuals, the second (Cluster II) consisted of 10 individuals, Cluster I as the main group contained multiple sub-clusters. PCA also showed 2 groups: PCA Group 1 included 29 individuals, PCA Group 2 included 12 individuals, consistent with the results of cluster analysis. The purpose of the present investigation was to provide information on genetic relationship of Amomum tsao-ko germplasm resources in main producing areas, also provide a theoretical basis for the protection and utilization of Amomum tsao-ko resources.

A Principal Component Analysis (PCA Approach to Seasonal and Zooplankton Diversity Relationships in Fishing Grounds of Mannar Gulf, India

Directory of Open Access Journals (Sweden)

Selvin J. PITCHAIKANI

2017-06-01

Full Text Available Principal component analysis (PCA is a technique used to emphasize variation and bring out strong patterns in a dataset. It is often used to make data easy to explore and visualize. The primary objective of the present study was to record information of zooplankton diversity in a systematic way and to study the variability and relationships among seasons prevailed in Gulf of Mannar. The PCA for the zooplankton seasonal diversity was investigated using the four seasonal datasets to understand the statistical significance among the four seasons. Two different principal components (PC were segregated in all the seasons homogeneously. PCA analyses revealed that Temora turbinata is an opportunistic species and zooplankton diversity was significantly different from season to season and principally, the zooplankton abundance and its dynamics in Gulf of Mannar is structured by seasonal current patterns. The factor loadings of zooplankton for different seasons in Tiruchendur coastal water (GOM is different compared with the Southwest coast of India; particularly, routine and opportunistic species were found within the positive and negative factors. The copepods Acrocalanus gracilis and Acartia erythrea were dominant in summer and Southwest monsoon due to the rainfall and freshwater discharge during the summer season; however, these species were replaced by Temora turbinata during Northeast monsoon season.

PM10 and gaseous pollutants trends from air quality monitoring networks in Bari province: principal component analysis and absolute principal component scores on a two years and half data set

Science.gov (United States)

2014-01-01

Background The chemical composition of aerosols and particle size distributions are the most significant factors affecting air quality. In particular, the exposure to finer particles can cause short and long-term effects on human health. In the present paper PM10 (particulate matter with aerodynamic diameter lower than 10 μm), CO, NOx (NO and NO2), Benzene and Toluene trends monitored in six monitoring stations of Bari province are shown. The data set used was composed by bi-hourly means for all parameters (12 bi-hourly means per day for each parameter) and it’s referred to the period of time from January 2005 and May 2007. The main aim of the paper is to provide a clear illustration of how large data sets from monitoring stations can give information about the number and nature of the pollutant sources, and mainly to assess the contribution of the traffic source to PM10 concentration level by using multivariate statistical techniques such as Principal Component Analysis (PCA) and Absolute Principal Component Scores (APCS). Results Comparing the night and day mean concentrations (per day) for each parameter it has been pointed out that there is a different night and day behavior for some parameters such as CO, Benzene and Toluene than PM10. This suggests that CO, Benzene and Toluene concentrations are mainly connected with transport systems, whereas PM10 is mostly influenced by different factors. The statistical techniques identified three recurrent sources, associated with vehicular traffic and particulate transport, covering over 90% of variance. The contemporaneous analysis of gas and PM10 has allowed underlining the differences between the sources of these pollutants. Conclusions The analysis of the pollutant trends from large data set and the application of multivariate statistical techniques such as PCA and APCS can give useful information about air quality and pollutant’s sources. These knowledge can provide useful advices to environmental policies in

Classification of soil samples according to their geographic origin using gamma-ray spectrometry and principal component analysis

International Nuclear Information System (INIS)

Dragovic, Snezana; Onjia, Antonije

2006-01-01

A principal component analysis (PCA) was used for classification of soil samples from different locations in Serbia and Montenegro. Based on activities of radionuclides ( 226 Ra, 238 U, 235 U, 4 K, 134 Cs, 137 Cs, 232 Th and 7 Be) detected by gamma-ray spectrometry, the classification of soils according to their geographical origin was performed. Application of PCA to our experimental data resulted in satisfactory classification rate (86.0% correctly classified samples). The obtained results indicate that gamma-ray spectrometry in conjunction with PCA is a viable tool for soil classification

Model Reduction via Principe Component Analysis and Markov Chain Monte Carlo (MCMC) Methods

Science.gov (United States)

Gong, R.; Chen, J.; Hoversten, M. G.; Luo, J.

2011-12-01

Geophysical and hydrogeological inverse problems often include a large number of unknown parameters, ranging from hundreds to millions, depending on parameterization and problems undertaking. This makes inverse estimation and uncertainty quantification very challenging, especially for those problems in two- or three-dimensional spatial domains. Model reduction technique has the potential of mitigating the curse of dimensionality by reducing total numbers of unknowns while describing the complex subsurface systems adequately. In this study, we explore the use of principal component analysis (PCA) and Markov chain Monte Carlo (MCMC) sampling methods for model reduction through the use of synthetic datasets. We compare the performances of three different but closely related model reduction approaches: (1) PCA methods with geometric sampling (referred to as 'Method 1'), (2) PCA methods with MCMC sampling (referred to as 'Method 2'), and (3) PCA methods with MCMC sampling and inclusion of random effects (referred to as 'Method 3'). We consider a simple convolution model with five unknown parameters as our goal is to understand and visualize the advantages and disadvantages of each method by comparing their inversion results with the corresponding analytical solutions. We generated synthetic data with noise added and invert them under two different situations: (1) the noised data and the covariance matrix for PCA analysis are consistent (referred to as the unbiased case), and (2) the noise data and the covariance matrix are inconsistent (referred to as biased case). In the unbiased case, comparison between the analytical solutions and the inversion results show that all three methods provide good estimates of the true values and Method 1 is computationally more efficient. In terms of uncertainty quantification, Method 1 performs poorly because of relatively small number of samples obtained, Method 2 performs best, and Method 3 overestimates uncertainty due to inclusion

EEG-Based Emotion Recognition Using Deep Learning Network with Principal Component Based Covariate Shift Adaptation

Directory of Open Access Journals (Sweden)

Suwicha Jirayucharoensak

2014-01-01

Full Text Available Automatic emotion recognition is one of the most challenging tasks. To detect emotion from nonstationary EEG signals, a sophisticated learning algorithm that can represent high-level abstraction is required. This study proposes the utilization of a deep learning network (DLN to discover unknown feature correlation between input signals that is crucial for the learning task. The DLN is implemented with a stacked autoencoder (SAE using hierarchical feature learning approach. Input features of the network are power spectral densities of 32-channel EEG signals from 32 subjects. To alleviate overfitting problem, principal component analysis (PCA is applied to extract the most important components of initial input features. Furthermore, covariate shift adaptation of the principal components is implemented to minimize the nonstationary effect of EEG signals. Experimental results show that the DLN is capable of classifying three different levels of valence and arousal with accuracy of 49.52% and 46.03%, respectively. Principal component based covariate shift adaptation enhances the respective classification accuracy by 5.55% and 6.53%. Moreover, DLN provides better performance compared to SVM and naive Bayes classifiers.

Empirical evaluation of grouping of lower urinary tract symptoms: principal component analysis of Tampere Ageing Male Urological Study data.

Science.gov (United States)

Pöyhönen, Antti; Häkkinen, Jukka T; Koskimäki, Juha; Hakama, Matti; Tammela, Teuvo L J; Auvinen, Anssi

2013-03-01

WHAT'S KNOWN ON THE SUBJECT? AND WHAT DOES THE STUDY ADD?: The ICS has divided LUTS into three groups: storage, voiding and post-micturition symptoms. The classification is based on anatomical, physiological and urodynamic considerations of a theoretical nature. We used principal component analysis (PCA) to determine the inter-correlations of various LUTS, which is a novel approach to research and can strengthen existing knowledge of the phenomenology of LUTS. After we had completed our analyses, another study was published that used a similar approach and results were very similar to those of the present study. We evaluated the constellation of LUTS using PCA of the data from a population-based study that included >4000 men. In our analysis, three components emerged from the 12 LUTS: voiding, storage and incontinence components. Our results indicated that incontinence may be separate from the other storage symptoms and post-micturition symptoms should perhaps be regarded as voiding symptoms. To determine how lower urinary tract symptoms (LUTS) relate to each other and assess if the classification proposed by the International Continence Society (ICS) is consistent with empirical findings. The information on urinary symptoms for this population-based study was collected using a self-administered postal questionnaire in 2004. The questionnaire was sent to 7470 men, aged 30-80 years, from Pirkanmaa County (Finland), of whom 4384 (58.7%) returned the questionnaire. The Danish Prostatic Symptom Score-1 questionnaire was used to evaluate urinary symptoms. Principal component analysis (PCA) was used to evaluate the inter-correlations among various urinary symptoms. The PCA produced a grouping of 12 LUTS into three categories consisting of voiding, storage and incontinence symptoms. Post-micturition symptoms were related to voiding symptoms, but incontinence symptoms were separate from storage symptoms. In the analyses by age group, similar categorization was found at

Latitude-Time Total Electron Content Anomalies as Precursors to Japan's Large Earthquakes Associated with Principal Component Analysis

Directory of Open Access Journals (Sweden)

Jyh-Woei Lin

2011-01-01

Full Text Available The goal of this study is to determine whether principal component analysis (PCA can be used to process latitude-time ionospheric TEC data on a monthly basis to identify earthquake associated TEC anomalies. PCA is applied to latitude-time (mean-of-a-month ionospheric total electron content (TEC records collected from the Japan GEONET network to detect TEC anomalies associated with 18 earthquakes in Japan (M≥6.0 from 2000 to 2005. According to the results, PCA was able to discriminate clear TEC anomalies in the months when all 18 earthquakes occurred. After reviewing months when no M≥6.0 earthquakes occurred but geomagnetic storm activity was present, it is possible that the maximal principal eigenvalues PCA returned for these 18 earthquakes indicate earthquake associated TEC anomalies. Previously PCA has been used to discriminate earthquake-associated TEC anomalies recognized by other researchers, who found that statistical association between large earthquakes and TEC anomalies could be established in the 5 days before earthquake nucleation; however, since PCA uses the characteristics of principal eigenvalues to determine earthquake related TEC anomalies, it is possible to show that such anomalies existed earlier than this 5-day statistical window.

QIM blind video watermarking scheme based on Wavelet transform and principal component analysis

Directory of Open Access Journals (Sweden)

Nisreen I. Yassin

2014-12-01

Full Text Available In this paper, a blind scheme for digital video watermarking is proposed. The security of the scheme is established by using one secret key in the retrieval of the watermark. Discrete Wavelet Transform (DWT is applied on each video frame decomposing it into a number of sub-bands. Maximum entropy blocks are selected and transformed using Principal Component Analysis (PCA. Quantization Index Modulation (QIM is used to quantize the maximum coefficient of the PCA blocks of each sub-band. Then, the watermark is embedded into the selected suitable quantizer values. The proposed scheme is tested using a number of video sequences. Experimental results show high imperceptibility. The computed average PSNR exceeds 45 dB. Finally, the scheme is applied on two medical videos. The proposed scheme shows high robustness against several attacks such as JPEG coding, Gaussian noise addition, histogram equalization, gamma correction, and contrast adjustment in both cases of regular videos and medical videos.

Use of principal components analysis (PCA) on estuarine sediment datasets: The effect of data pre-treatment

International Nuclear Information System (INIS)

Reid, M.K.; Spencer, K.L.

2009-01-01

Principal components analysis (PCA) is a multivariate statistical technique capable of discerning patterns in large environmental datasets. Although widely used, there is disparity in the literature with respect to data pre-treatment prior to PCA. This research examines the influence of commonly reported data pre-treatment methods on PCA outputs, and hence data interpretation, using a typical environmental dataset comprising sediment geochemical data from an estuary in SE England. This study demonstrated that applying the routinely used log (x + 1) transformation skewed the data and masked important trends. Removing outlying samples and correcting for the influence of grain size had the most significant effect on PCA outputs and data interpretation. Reducing the influence of grain size using granulometric normalisation meant that other factors affecting metal variability, including mineralogy, anthropogenic sources and distance along the salinity transect could be identified and interpreted more clearly. - Data pre-treatment can have a significant influence on the outcome of PCA.

Application of Principal Component Analysis in Assessment of Relation Between the Parameters of Technological Quality of Wheat Grains Treated with Inert Dusts Against Rice Weevil (Sitophilus oryzae L.

Directory of Open Access Journals (Sweden)

Marija Bodroža-Solarov

2011-01-01

Full Text Available Quality parameters of several wheat grain lots (low vitreous and high vitreous grains,non-infested and infested with rice weevils, (Sitophilus oryzae L. treated with inert dusts(natural zeolite, two diatomaceous earths originating from Serbia and a commercial productProtect-It® were investigated. Principal component analysis (PCA was used to investigatethe classification of treated grain lots and to assess how attributes of technological qualitycontribute to this classification. This research showed that vitreousness (0.95 and test weight(0.93 contributed most to the first principal component whereas extensigraph area (-0.76contributed to the second component. The determined accountability of the total variabilityby the first component was around 55%, while with the second it was 18%, which meansthat those two dimensions together account for around 70% of total variability of the observedset of variables. Principal component analysis (PCA of data set was able to distinguishamong the various treatments of wheat lots. It was revealed that inert dust treatments producedifferent effects depending on the degree of endosperm vitreousness.

Use of Principal Components Analysis and Kriging to Predict Groundwater-Sourced Rural Drinking Water Quality in Saskatchewan.

Science.gov (United States)

McLeod, Lianne; Bharadwaj, Lalita; Epp, Tasha; Waldner, Cheryl L

2017-09-15

Groundwater drinking water supply surveillance data were accessed to summarize water quality delivered as public and private water supplies in southern Saskatchewan as part of an exposure assessment for epidemiologic analyses of associations between water quality and type 2 diabetes or cardiovascular disease. Arsenic in drinking water has been linked to a variety of chronic diseases and previous studies have identified multiple wells with arsenic above the drinking water standard of 0.01 mg/L; therefore, arsenic concentrations were of specific interest. Principal components analysis was applied to obtain principal component (PC) scores to summarize mixtures of correlated parameters identified as health standards and those identified as aesthetic objectives in the Saskatchewan Drinking Water Quality Standards and Objective. Ordinary, universal, and empirical Bayesian kriging were used to interpolate arsenic concentrations and PC scores in southern Saskatchewan, and the results were compared. Empirical Bayesian kriging performed best across all analyses, based on having the greatest number of variables for which the root mean square error was lowest. While all of the kriging methods appeared to underestimate high values of arsenic and PC scores, empirical Bayesian kriging was chosen to summarize large scale geographic trends in groundwater-sourced drinking water quality and assess exposure to mixtures of trace metals and ions.

Quantitative profiling of polar metabolites in herbal medicine injections for multivariate statistical evaluation based on independence principal component analysis.

Directory of Open Access Journals (Sweden)

Miaomiao Jiang

Full Text Available Botanical primary metabolites extensively exist in herbal medicine injections (HMIs, but often were ignored to control. With the limitation of bias towards hydrophilic substances, the primary metabolites with strong polarity, such as saccharides, amino acids and organic acids, are usually difficult to detect by the routinely applied reversed-phase chromatographic fingerprint technology. In this study, a proton nuclear magnetic resonance (1H NMR profiling method was developed for efficient identification and quantification of small polar molecules, mostly primary metabolites in HMIs. A commonly used medicine, Danhong injection (DHI, was employed as a model. With the developed method, 23 primary metabolites together with 7 polyphenolic acids were simultaneously identified, of which 13 metabolites with fully separated proton signals were quantified and employed for further multivariate quality control assay. The quantitative 1H NMR method was validated with good linearity, precision, repeatability, stability and accuracy. Based on independence principal component analysis (IPCA, the contents of 13 metabolites were characterized and dimensionally reduced into the first two independence principal components (IPCs. IPC1 and IPC2 were then used to calculate the upper control limits (with 99% confidence ellipsoids of χ2 and Hotelling T2 control charts. Through the constructed upper control limits, the proposed method was successfully applied to 36 batches of DHI to examine the out-of control sample with the perturbed levels of succinate, malonate, glucose, fructose, salvianic acid and protocatechuic aldehyde. The integrated strategy has provided a reliable approach to identify and quantify multiple polar metabolites of DHI in one fingerprinting spectrum, and it has also assisted in the establishment of IPCA models for the multivariate statistical evaluation of HMIs.

Investigation of inversion polymorphisms in the human genome using principal components analysis.

Science.gov (United States)

Ma, Jianzhong; Amos, Christopher I

2012-01-01

Despite the significant advances made over the last few years in mapping inversions with the advent of paired-end sequencing approaches, our understanding of the prevalence and spectrum of inversions in the human genome has lagged behind other types of structural variants, mainly due to the lack of a cost-efficient method applicable to large-scale samples. We propose a novel method based on principal components analysis (PCA) to characterize inversion polymorphisms using high-density SNP genotype data. Our method applies to non-recurrent inversions for which recombination between the inverted and non-inverted segments in inversion heterozygotes is suppressed due to the loss of unbalanced gametes. Inside such an inversion region, an effect similar to population substructure is thus created: two distinct "populations" of inversion homozygotes of different orientations and their 1:1 admixture, namely the inversion heterozygotes. This kind of substructure can be readily detected by performing PCA locally in the inversion regions. Using simulations, we demonstrated that the proposed method can be used to detect and genotype inversion polymorphisms using unphased genotype data. We applied our method to the phase III HapMap data and inferred the inversion genotypes of known inversion polymorphisms at 8p23.1 and 17q21.31. These inversion genotypes were validated by comparing with literature results and by checking Mendelian consistency using the family data whenever available. Based on the PCA-approach, we also performed a preliminary genome-wide scan for inversions using the HapMap data, which resulted in 2040 candidate inversions, 169 of which overlapped with previously reported inversions. Our method can be readily applied to the abundant SNP data, and is expected to play an important role in developing human genome maps of inversions and exploring associations between inversions and susceptibility of diseases.

Pengenalan Wajah Pada Sistem Presensi Menggunakan Metode Dynamic Times Wrapping, Principal Component Analysis dan Gabor Wavelet

Directory of Open Access Journals (Sweden)

Romi Wiryadinata

2016-03-01

Full Text Available Presensi is a logging attendance, part of activity reporting an institution, or a component institution itself which contains the presence data compiled and arranged so that it is easy to search for and used when required at any time by the parties concerned. Computer application developed in the presensi system is a computer application that can recognize a person's face using only a webcam. Face recognition in this study using a webcam to capture an image of the room at any given time who later identified the existing faces. Some of the methods used in the research here is a method of the Dynamic Times Wrapping (DTW, Principal Component Analysis (PCA and Gabor Wavelet. This system, used in testing with normal facial image expression. The success rate of the introduction with the normal expression of face image using DTW amounting to 80%, 100% and PCA Gabor wavelet 97%

Fast noise level estimation algorithm based on principal component analysis transform and nonlinear rectification

Science.gov (United States)

Xu, Shaoping; Zeng, Xiaoxia; Jiang, Yinnan; Tang, Yiling

2018-01-01

We proposed a noniterative principal component analysis (PCA)-based noise level estimation (NLE) algorithm that addresses the problem of estimating the noise level with a two-step scheme. First, we randomly extracted a number of raw patches from a given noisy image and took the smallest eigenvalue of the covariance matrix of the raw patches as the preliminary estimation of the noise level. Next, the final estimation was directly obtained with a nonlinear mapping (rectification) function that was trained on some representative noisy images corrupted with different known noise levels. Compared with the state-of-art NLE algorithms, the experiment results show that the proposed NLE algorithm can reliably infer the noise level and has robust performance over a wide range of image contents and noise levels, showing a good compromise between speed and accuracy in general.

Identification and visualization of dominant patterns and anomalies in remotely sensed vegetation phenology using a parallel tool for principal components analysis

Science.gov (United States)

Richard Tran Mills; Jitendra Kumar; Forrest M. Hoffman; William W. Hargrove; Joseph P. Spruce; Steven P. Norman

2013-01-01

We investigated the use of principal components analysis (PCA) to visualize dominant patterns and identify anomalies in a multi-year land surface phenology data set (231 m × 231 m normalized difference vegetation index (NDVI) values derived from the Moderate Resolution Imaging Spectroradiometer (MODIS)) used for detecting threats to forest health in the conterminous...

A Biometric Face Recognition System Using an Algorithm Based on the Principal Component Analysis Technique

Directory of Open Access Journals (Sweden)

Gheorghe Gîlcă

2015-06-01

Full Text Available This article deals with a recognition system using an algorithm based on the Principal Component Analysis (PCA technique. The recognition system consists only of a PC and an integrated video camera. The algorithm is developed in MATLAB language and calculates the eigenfaces considered as features of the face. The PCA technique is based on the matching between the facial test image and the training prototype vectors. The mathcing score between the facial test image and the training prototype vectors is calculated between their coefficient vectors. If the matching is high, we have the best recognition. The results of the algorithm based on the PCA technique are very good, even if the person looks from one side at the video camera.

Determinants of Return on Assets in Romania: A Principal Component Analysis

Directory of Open Access Journals (Sweden)

Sorana Vatavu

2015-03-01

Full Text Available This paper examines the impact of capital structure, as well as its determinants on the financial performance of Romanian companies listed on the Bucharest Stock Exchange. The analysis is based on cross sectional regressions and factor analysis, and it refers to a ten-year period (2003-2012. Return on assets (ROA is the performance proxy, while the capital structure indicator is debt ratio. Regression results indicate that Romanian companies register higher returns when they operate with limited borrowings. Among the capital structure determinants, tangibility and business risk have a negative impact on ROA, but the level of taxation has a positive effect, showing that companies manage their assets more efficiently during times of higher fiscal pressure. Performance is sustained by sales turnover, but not significantly influenced by high levels of liquidity. Periods of unstable economic conditions, reflected by high inflation rates and the current financial crisis, have a strong negative impact on corporate performance. Based on regression results, three factors were considered through the method of iterated principal component factors: the first one incorporates debt and size, as an indicator of consumption, the second one integrates the influence of tangibility and liquidity, marking the investment potential, and the third one is an indicator of assessed risk, integrating the volatility of earnings with the level of taxation. ROA is significantly influenced by these three factors, regardless the regression method used. The consumption factor has a negative impact on performance, while the investment and risk variables positively influence ROA.

SU-E-I-58: Objective Models of Breast Shape Undergoing Mammography and Tomosynthesis Using Principal Component Analysis.

Science.gov (United States)

Feng, Ssj; Sechopoulos, I

2012-06-01

To develop an objective model of the shape of the compressed breast undergoing mammographic or tomosynthesis acquisition. Automated thresholding and edge detection was performed on 984 anonymized digital mammograms (492 craniocaudal (CC) view mammograms and 492 medial lateral oblique (MLO) view mammograms), to extract the edge of each breast. Principal Component Analysis (PCA) was performed on these edge vectors to identify a limited set of parameters and eigenvectors that. These parameters and eigenvectors comprise a model that can be used to describe the breast shapes present in acquired mammograms and to generate realistic models of breasts undergoing acquisition. Sample breast shapes were then generated from this model and evaluated. The mammograms in the database were previously acquired for a separate study and authorized for use in further research. The PCA successfully identified two principal components and their corresponding eigenvectors, forming the basis for the breast shape model. The simulated breast shapes generated from the model are reasonable approximations of clinically acquired mammograms. Using PCA, we have obtained models of the compressed breast undergoing mammographic or tomosynthesis acquisition based on objective analysis of a large image database. Up to now, the breast in the CC view has been approximated as a semi-circular tube, while there has been no objectively-obtained model for the MLO view breast shape. Such models can be used for various breast imaging research applications, such as x-ray scatter estimation and correction, dosimetry estimates, and computer-aided detection and diagnosis. © 2012 American Association of Physicists in Medicine.

Composition and in vitro cytotoxic activities of essential oil of Hedychium spicatum from different geographical regions of western Himalaya by principal components analysis.

Science.gov (United States)

Mishra, Tripti; Pal, Mahesh; Meena, Sanjeev; Datta, Dipak; Dixit, Prateek; Kumar, Anil; Meena, Baleshwar; Rana, T S; Upreti, D K

2016-01-01

The rhizome of Hedychium spicatum has been widely used in traditional medicines. The present study deals with the evaluation of the cytotoxic potential of rhizome essential oils from four different regions of the Western Himalaya (India) along with comparative correlation analysis to characterise the bioactive cytotoxic component. The essential oils were coded as MHS-1, MHS-2, MHS-3 and MHS-4, and characterised using GC-FID and GC-MS. The main volatile compounds identified were 1,8-cineol, eudesmol, cubenol, spathulenol and α-cadinol. In vitro cytotoxic activities were assessed against human cancer cell lines such as, the lung (A549), colon (DLD-1, SW 620), breast (MCF-7, MDA-MB-231), head and neck (FaDu), and cervix (HeLa). MHS-4 is significantly active in comparison to other samples against all cancer cell lines. Sample MHS-4 has major proportion of monoterpene alcohol mainly 1,8-cineol. Principal components analysis was performed for the experimental results and all four samples were clustered according to their percentage inhibition at different doses.

Principal Component Analysis Coupled with Artificial Neural Networks—A Combined Technique Classifying Small Molecular Structures Using a Concatenated Spectral Database

Directory of Open Access Journals (Sweden)

Mihail Lucian Birsa

2011-10-01

Full Text Available In this paper we present several expert systems that predict the class identity of the modeled compounds, based on a preprocessed spectral database. The expert systems were built using Artificial Neural Networks (ANN and are designed to predict if an unknown compound has the toxicological activity of amphetamines (stimulant and hallucinogen, or whether it is a nonamphetamine. In attempts to circumvent the laws controlling drugs of abuse, new chemical structures are very frequently introduced on the black market. They are obtained by slightly modifying the controlled molecular structures by adding or changing substituents at various positions on the banned molecules. As a result, no substance similar to those forming a prohibited class may be used nowadays, even if it has not been specifically listed. Therefore, reliable, fast and accessible systems capable of modeling and then identifying similarities at molecular level, are highly needed for epidemiological, clinical, and forensic purposes. In order to obtain the expert systems, we have preprocessed a concatenated spectral database, representing the GC-FTIR (gas chromatography-Fourier transform infrared spectrometry and GC-MS (gas chromatography-mass spectrometry spectra of 103 forensic compounds. The database was used as input for a Principal Component Analysis (PCA. The scores of the forensic compounds on the main principal components (PCs were then used as inputs for the ANN systems. We have built eight PC-ANN systems (principal component analysis coupled with artificial neural network with a different number of input variables: 15 PCs, 16 PCs, 17 PCs, 18 PCs, 19 PCs, 20 PCs, 21 PCs and 22 PCs. The best expert system was found to be the ANN network built with 18 PCs, which accounts for an explained variance of 77%. This expert system has the best sensitivity (a rate of classification C = 100% and a rate of true positives TP = 100%, as well as a good selectivity (a rate of true negatives TN

Classification of peacock feather reflectance using principal component analysis similarity factors from multispectral imaging data.

Science.gov (United States)

Medina, José M; Díaz, José A; Vukusic, Pete

2015-04-20

Iridescent structural colors in biology exhibit sophisticated spatially-varying reflectance properties that depend on both the illumination and viewing angles. The classification of such spectral and spatial information in iridescent structurally colored surfaces is important to elucidate the functional role of irregularity and to improve understanding of color pattern formation at different length scales. In this study, we propose a non-invasive method for the spectral classification of spatial reflectance patterns at the micron scale based on the multispectral imaging technique and the principal component analysis similarity factor (PCASF). We demonstrate the effectiveness of this approach and its component methods by detailing its use in the study of the angle-dependent reflectance properties of Pavo cristatus (the common peacock) feathers, a species of peafowl very well known to exhibit bright and saturated iridescent colors. We show that multispectral reflectance imaging and PCASF approaches can be used as effective tools for spectral recognition of iridescent patterns in the visible spectrum and provide meaningful information for spectral classification of the irregularity of the microstructure in iridescent plumage.

Infrared and visible image fusion based on robust principal component analysis and compressed sensing

Science.gov (United States)

Li, Jun; Song, Minghui; Peng, Yuanxi

2018-03-01

Current infrared and visible image fusion methods do not achieve adequate information extraction, i.e., they cannot extract the target information from infrared images while retaining the background information from visible images. Moreover, most of them have high complexity and are time-consuming. This paper proposes an efficient image fusion framework for infrared and visible images on the basis of robust principal component analysis (RPCA) and compressed sensing (CS). The novel framework consists of three phases. First, RPCA decomposition is applied to the infrared and visible images to obtain their sparse and low-rank components, which represent the salient features and background information of the images, respectively. Second, the sparse and low-rank coefficients are fused by different strategies. On the one hand, the measurements of the sparse coefficients are obtained by the random Gaussian matrix, and they are then fused by the standard deviation (SD) based fusion rule. Next, the fused sparse component is obtained by reconstructing the result of the fused measurement using the fast continuous linearized augmented Lagrangian algorithm (FCLALM). On the other hand, the low-rank coefficients are fused using the max-absolute rule. Subsequently, the fused image is superposed by the fused sparse and low-rank components. For comparison, several popular fusion algorithms are tested experimentally. By comparing the fused results subjectively and objectively, we find that the proposed framework can extract the infrared targets while retaining the background information in the visible images. Thus, it exhibits state-of-the-art performance in terms of both fusion effects and timeliness.

Measuring yield performance of upland cotton varieties using adaptability, stability and principal component analyses

International Nuclear Information System (INIS)

Baloch, M.J.

2003-01-01

Nine upland cotton varieties/strains were tested over 36 environments in Pakistan so as to determine their stability in yield performance. The regression coefficient (b) was used as a measure of adaptability, whereas parameters such as coefficient of determination (r2) and sum of squared deviations from regression (s/sup 2/d) were used as measure of stability. Although the regression coefficients (b) of all varieties did not deviate significantly from the unit slope, the varieties CRIS-5A. BII-89, DNH-40 and Rehmani gave b value closer to unity implying their better adaptation. Lower s/sub 2/d and higher r/sub 2/ of CRIS- 121 and DNH-40 suggest that both of these are fairly stable. The results indicate that, generally, adaptability and stability parameters are independent of each in as much as not all of the parameters simultaneously favoured one variety over the other excepting the variety DNH-40, which was stable based on majority of the parameters. Principal component analysis revealed that the first two components (latent roots) account for about 91.4% of the total variation. The latent vectors of first principal component (PCA1) were smaller and positive which also suggest that most of the varieties were quite adaptive to all of the test environments. (author)

Improved Principal Component Analysis for Anomaly Detection: Application to an Emergency Department

KAUST Repository

Harrou, Fouzi

2015-07-03

Monitoring of production systems, such as those in hospitals, is primordial for ensuring the best management and maintenance desired product quality. Detection of emergent abnormalities allows preemptive actions that can prevent more serious consequences. Principal component analysis (PCA)-based anomaly-detection approach has been used successfully for monitoring systems with highly correlated variables. However, conventional PCA-based detection indices, such as the Hotelling’s T2T2 and the Q statistics, are ill suited to detect small abnormalities because they use only information from the most recent observations. Other multivariate statistical metrics, such as the multivariate cumulative sum (MCUSUM) control scheme, are more suitable for detection small anomalies. In this paper, a generic anomaly detection scheme based on PCA is proposed to monitor demands to an emergency department. In such a framework, the MCUSUM control chart is applied to the uncorrelated residuals obtained from the PCA model. The proposed PCA-based MCUSUM anomaly detection strategy is successfully applied to the practical data collected from the database of the pediatric emergency department in the Lille Regional Hospital Centre, France. The detection results evidence that the proposed method is more effective than the conventional PCA-based anomaly-detection methods.

A Principal Component Analysis/Fuzzy Comprehensive Evaluation for Rockburst Potential in Kimberlite

Science.gov (United States)

Pu, Yuanyuan; Apel, Derek; Xu, Huawei

2018-02-01

Kimberlite is an igneous rock which sometimes bears diamonds. Most of the diamonds mined in the world today are found in kimberlite ores. Burst potential in kimberlite has not been investigated, because kimberlite is mostly mined using open-pit mining, which poses very little threat of rock bursting. However, as the mining depth keeps increasing, the mines convert to underground mining methods, which can pose a threat of rock bursting in kimberlite. This paper focuses on the burst potential of kimberlite at a diamond mine in northern Canada. A combined model with the methods of principal component analysis (PCA) and fuzzy comprehensive evaluation (FCE) is developed to process data from 12 different locations in kimberlite pipes. Based on calculated 12 fuzzy evaluation vectors, 8 locations show a moderate burst potential, 2 locations show no burst potential, and 2 locations show strong and violent burst potential, respectively. Using statistical principles, a Mahalanobis distance is adopted to build a comprehensive fuzzy evaluation vector for the whole mine and the final evaluation for burst potential is moderate, which is verified by a practical rockbursting situation at mine site.

Improved Principal Component Analysis for Anomaly Detection: Application to an Emergency Department

KAUST Repository

Harrou, Fouzi; Kadri, Farid; Chaabane, Sondé s; Tahon, Christian; Sun, Ying

2015-01-01

Monitoring of production systems, such as those in hospitals, is primordial for ensuring the best management and maintenance desired product quality. Detection of emergent abnormalities allows preemptive actions that can prevent more serious consequences. Principal component analysis (PCA)-based anomaly-detection approach has been used successfully for monitoring systems with highly correlated variables. However, conventional PCA-based detection indices, such as the Hotelling’s T2T2 and the Q statistics, are ill suited to detect small abnormalities because they use only information from the most recent observations. Other multivariate statistical metrics, such as the multivariate cumulative sum (MCUSUM) control scheme, are more suitable for detection small anomalies. In this paper, a generic anomaly detection scheme based on PCA is proposed to monitor demands to an emergency department. In such a framework, the MCUSUM control chart is applied to the uncorrelated residuals obtained from the PCA model. The proposed PCA-based MCUSUM anomaly detection strategy is successfully applied to the practical data collected from the database of the pediatric emergency department in the Lille Regional Hospital Centre, France. The detection results evidence that the proposed method is more effective than the conventional PCA-based anomaly-detection methods.

Pipeline monitoring using acoustic principal component analysis recognition with the Mel scale

International Nuclear Information System (INIS)

Wan, Chunfeng; Mita, Akira

2009-01-01

In modern cities, many important pipelines are laid underground. In order to prevent these lifeline infrastructures from accidental damage, monitoring systems are becoming indispensable. Third party activities were shown by recent reports to be a major cause of pipeline damage. Potential damage threat to the pipeline can be identified by detecting dangerous construction equipment nearby by studying the surrounding noise. Sound recognition technologies are used to identify them by their sounds, which can easily be captured by small sensors deployed along the pipelines. Pattern classification methods based on principal component analysis (PCA) were used to recognize the sounds from road cutters. In this paper, a Mel residual, i.e. the PCA residual in the Mel scale, is proposed to be the recognition feature. Determining if a captured sound belongs to a road cutter only requires checking how large its Mel residual is. Experiments were conducted and results showed that the proposed Mel-residual-based PCA recognition worked very well. The proposed Mel PCA residual recognition method will be very useful for pipeline monitoring systems to prevent accidental breakage and to ensure the safety of underground lifeline infrastructures

Quantification and recognition of parkinsonian gait from monocular video imaging using kernel-based principal component analysis

Directory of Open Access Journals (Sweden)

Chen Shih-Wei

2011-11-01

Full Text Available Abstract Background The computer-aided identification of specific gait patterns is an important issue in the assessment of Parkinson's disease (PD. In this study, a computer vision-based gait analysis approach is developed to assist the clinical assessments of PD with kernel-based principal component analysis (KPCA. Method Twelve PD patients and twelve healthy adults with no neurological history or motor disorders within the past six months were recruited and separated according to their "Non-PD", "Drug-On", and "Drug-Off" states. The participants were asked to wear light-colored clothing and perform three walking trials through a corridor decorated with a navy curtain at their natural pace. The participants' gait performance during the steady-state walking period was captured by a digital camera for gait analysis. The collected walking image frames were then transformed into binary silhouettes for noise reduction and compression. Using the developed KPCA-based method, the features within the binary silhouettes can be extracted to quantitatively determine the gait cycle time, stride length, walking velocity, and cadence. Results and Discussion The KPCA-based method uses a feature-extraction approach, which was verified to be more effective than traditional image area and principal component analysis (PCA approaches in classifying "Non-PD" controls and "Drug-Off/On" PD patients. Encouragingly, this method has a high accuracy rate, 80.51%, for recognizing different gaits. Quantitative gait parameters are obtained, and the power spectrums of the patients' gaits are analyzed. We show that that the slow and irregular actions of PD patients during walking tend to transfer some of the power from the main lobe frequency to a lower frequency band. Our results indicate the feasibility of using gait performance to evaluate the motor function of patients with PD. Conclusion This KPCA-based method requires only a digital camera and a decorated corridor setup

Synoptic sampling and principal components analysis to identify sources of water and metals to an acid mine drainage stream

OpenAIRE

Byrne, Patrick; Runkel, Robert L.; Walton-Day, Katherine

2017-01-01

Combining the synoptic mass balance approach with principal components analysis (PCA) can be an effective method for discretising the chemistry of inflows and source areas in watersheds where contamination is diffuse in nature and/or complicated by groundwater interactions. This paper presents a field-scale study in which synoptic sampling and PCA are employed in a mineralized watershed (Lion Creek, Colorado, USA) under low flow conditions to (i) quantify the impacts of mining activity on str...

Multi-point accelerometric detection and principal component analysis of heart sounds

International Nuclear Information System (INIS)

De Panfilis, S; Peccianti, M; Chiru, O M; Moroni, C; Vashkevich, V; Parisi, G; Cassone, R

2013-01-01

Heart sounds are a fundamental physiological variable that provide a unique insight into cardiac semiotics. However a deterministic and unambiguous association between noises in cardiac dynamics is far from being accomplished yet due to many and different overlapping events which contribute to the acoustic emission. The current computer-based capacities in terms of signal detection and processing allow one to move from the standard cardiac auscultation, even in its improved forms like electronic stethoscopes or hi-tech phonocardiography, to the extraction of information on the cardiac activity previously unexplored. In this report, we present a new equipment for the detection of heart sounds, based on a set of accelerometric sensors placed in contact with the chest skin on the precordial area, and are able to measure simultaneously the vibration induced on the chest surface by the heart's mechanical activity. By utilizing advanced algorithms for the data treatment, such as wavelet decomposition and principal component analysis, we are able to condense the spatially extended acoustic information and to provide a synthetical representation of the heart activity. We applied our approach to 30 adults, mixed per gender, age and healthiness, and correlated our results with standard echocardiographic examinations. We obtained a 93% concordance rate with echocardiography between healthy and unhealthy hearts, including minor abnormalities such as mitral valve prolapse. (fast track communication)

Principal and secondary luminescence lifetime components in annealed natural quartz

International Nuclear Information System (INIS)

Chithambo, M.L.; Ogundare, F.O.; Feathers, J.

2008-01-01

Time-resolved luminescence spectra from quartz can be separated into components with distinct principal and secondary lifetimes depending on certain combinations of annealing and measurement temperature. The influence of annealing on properties of the lifetimes related to irradiation dose and temperature of measurement has been investigated in sedimentary quartz annealed at various temperatures up to 900 deg. C. Time-resolved luminescence for use in the analysis was pulse stimulated from samples at 470 nm between 20 and 200 deg. C. Luminescence lifetimes decrease with measurement temperature due to increasing thermal effect on the associated luminescence with an activation energy of thermal quenching equal to 0.68±0.01eV for the secondary lifetime but only qualitatively so for the principal lifetime component. Concerning the influence of annealing temperature, luminescence lifetimes measured at 20 deg. C are constant at about 33μs for annealing temperatures up to 600 0 C but decrease to about 29μs when the annealing temperature is increased to 900 deg. C. In addition, it was found that lifetime components in samples annealed at 800 deg. C are independent of radiation dose in the range 85-1340 Gy investigated. The dependence of lifetimes on both the annealing temperature and magnitude of radiation dose is described as being due to the increasing importance of a particular recombination centre in the luminescence emission process as a result of dynamic hole transfer between non-radiative and radiative luminescence centres

Principal component analysis of global warming with respect to CO{sub 2} emission in Nigeria: an exploratory study

Energy Technology Data Exchange (ETDEWEB)

Igwenagu, C.M. [Enugu State University of Science and Technology (Nigeria). Dept. of Industrial Mathematics, Applied Statistics and Demography

2011-07-01

This study has examined the position of Nigeria in relation to carbon dioxide (CO{sub 2}) emission in readiness for emission trading as proposed in the Kyoto protocol as a measure of reducing global warming. It was discovered that Nigeria emits only 0.4% of the world's total CO{sub 2} emission indicating that they will be possible sellers of emission as contained in the Kyoto protocol. Fifty countries were selected for the analysis and some possible correlates of CO{sub 2} were considered. Correlation analysis and principal component analysis revealed that gross domestic product and industrial output accounted for 93% of the total variation. Based on this, a very low economic activity is being experienced in the country.

Principal semantic components of language and the measurement of meaning.

Science.gov (United States)

Samsonovich, Alexei V; Samsonovic, Alexei V; Ascoli, Giorgio A

2010-06-11

Metric systems for semantics, or semantic cognitive maps, are allocations of words or other representations in a metric space based on their meaning. Existing methods for semantic mapping, such as Latent Semantic Analysis and Latent Dirichlet Allocation, are based on paradigms involving dissimilarity metrics. They typically do not take into account relations of antonymy and yield a large number of domain-specific semantic dimensions. Here, using a novel self-organization approach, we construct a low-dimensional, context-independent semantic map of natural language that represents simultaneously synonymy and antonymy. Emergent semantics of the map principal components are clearly identifiable: the first three correspond to the meanings of "good/bad" (valence), "calm/excited" (arousal), and "open/closed" (freedom), respectively. The semantic map is sufficiently robust to allow the automated extraction of synonyms and antonyms not originally in the dictionaries used to construct the map and to predict connotation from their coordinates. The map geometric characteristics include a limited number ( approximately 4) of statistically significant dimensions, a bimodal distribution of the first component, increasing kurtosis of subsequent (unimodal) components, and a U-shaped maximum-spread planar projection. Both the semantic content and the main geometric features of the map are consistent between dictionaries (Microsoft Word and Princeton's WordNet), among Western languages (English, French, German, and Spanish), and with previously established psychometric measures. By defining the semantics of its dimensions, the constructed map provides a foundational metric system for the quantitative analysis of word meaning. Language can be viewed as a cumulative product of human experiences. Therefore, the extracted principal semantic dimensions may be useful to characterize the general semantic dimensions of the content of mental states. This is a fundamental step toward a

Principal semantic components of language and the measurement of meaning.

Directory of Open Access Journals (Sweden)

Alexei V Samsonovich

Full Text Available Metric systems for semantics, or semantic cognitive maps, are allocations of words or other representations in a metric space based on their meaning. Existing methods for semantic mapping, such as Latent Semantic Analysis and Latent Dirichlet Allocation, are based on paradigms involving dissimilarity metrics. They typically do not take into account relations of antonymy and yield a large number of domain-specific semantic dimensions. Here, using a novel self-organization approach, we construct a low-dimensional, context-independent semantic map of natural language that represents simultaneously synonymy and antonymy. Emergent semantics of the map principal components are clearly identifiable: the first three correspond to the meanings of "good/bad" (valence, "calm/excited" (arousal, and "open/closed" (freedom, respectively. The semantic map is sufficiently robust to allow the automated extraction of synonyms and antonyms not originally in the dictionaries used to construct the map and to predict connotation from their coordinates. The map geometric characteristics include a limited number ( approximately 4 of statistically significant dimensions, a bimodal distribution of the first component, increasing kurtosis of subsequent (unimodal components, and a U-shaped maximum-spread planar projection. Both the semantic content and the main geometric features of the map are consistent between dictionaries (Microsoft Word and Princeton's WordNet, among Western languages (English, French, German, and Spanish, and with previously established psychometric measures. By defining the semantics of its dimensions, the constructed map provides a foundational metric system for the quantitative analysis of word meaning. Language can be viewed as a cumulative product of human experiences. Therefore, the extracted principal semantic dimensions may be useful to characterize the general semantic dimensions of the content of mental states. This is a fundamental step

Impact of sample size on principal component analysis ordination of an environmental data set: effects on eigenstructure

Directory of Open Access Journals (Sweden)

Shaukat S. Shahid

2016-06-01

Full Text Available In this study, we used bootstrap simulation of a real data set to investigate the impact of sample size (N = 20, 30, 40 and 50 on the eigenvalues and eigenvectors resulting from principal component analysis (PCA. For each sample size, 100 bootstrap samples were drawn from environmental data matrix pertaining to water quality variables (p = 22 of a small data set comprising of 55 samples (stations from where water samples were collected. Because in ecology and environmental sciences the data sets are invariably small owing to high cost of collection and analysis of samples, we restricted our study to relatively small sample sizes. We focused attention on comparison of first 6 eigenvectors and first 10 eigenvalues. Data sets were compared using agglomerative cluster analysis using Ward’s method that does not require any stringent distributional assumptions.

Identification of differences in chemical composition among whole stick and sliced Nitran salamis trough principal component analysis

Directory of Open Access Journals (Sweden)

Tomáš Fekete

2016-05-01

Full Text Available The subject of this work was to examine differences in chemical composition of sliced and whole stick Nitran salamis, purchased from various manufacturers. Nitran salamis are traditional dry fermented meat products of Slovak origin. Taking into account variations in raw materials, production process and potential adulteration, differences in chemical composition within one brand of salami from different manufacturers might be expected. Ten salamis were determined for basic chemical composition attributes and Principal Component Analysis was applied on data matrix to identify anomalous ones. It has been shown that six attributes, namely: protein without collagen of total protein, total protein, total meat, total fat, collagen of total protein and NaCl, were the most important for salamis as first two Principal Components together explained 70.16% of variance among them. Nitran D was found to be the most anomalous salami, as had the lowest value of protein without collagen of total protein (14.14% ±0.26%, total protein (17.42% ±0.44%, total meat (120.29% ±0.98% and the highest one of total fat (50.85% ±0.95%, collagen of total protein (18.83% ±0.50% and NaCl (9.55% ±1.93%, when compared to its whole stick variant Nitran C and other samples. In addition to collagen of total protein content, Nitran D together with Nitran A, F and H did not satisfied the legislatively determined criterion, which is ≤16%. This suggested that extra connective tissues were added to intermediate products, which resulted in high variability and inferior quality of final products. It is a common practice in the meat industry to increase the protein content or water binding properties of meat products.

UV spectral fingerprinting and analysis of variance-principal component analysis: a useful tool for characterizing sources of variance in plant materials.

Science.gov (United States)

Luthria, Devanand L; Mukhopadhyay, Sudarsan; Robbins, Rebecca J; Finley, John W; Banuelos, Gary S; Harnly, James M

2008-07-23

UV spectral fingerprints, in combination with analysis of variance-principal components analysis (ANOVA-PCA), can differentiate between cultivars and growing conditions (or treatments) and can be used to identify sources of variance. Broccoli samples, composed of two cultivars, were grown under seven different conditions or treatments (four levels of Se-enriched irrigation waters, organic farming, and conventional farming with 100 and 80% irrigation based on crop evaporation and transpiration rate). Freeze-dried powdered samples were extracted with methanol-water (60:40, v/v) and analyzed with no prior separation. Spectral fingerprints were acquired for the UV region (220-380 nm) using a 50-fold dilution of the extract. ANOVA-PCA was used to construct subset matrices that permitted easy verification of the hypothesis that cultivar and treatment contributed to a difference in the chemical expression of the broccoli. The sums of the squares of the same matrices were used to show that cultivar, treatment, and analytical repeatability contributed 30.5, 68.3, and 1.2% of the variance, respectively.

2L-PCA: a two-level principal component analyzer for quantitative drug design and its applications.

Science.gov (United States)

Du, Qi-Shi; Wang, Shu-Qing; Xie, Neng-Zhong; Wang, Qing-Yan; Huang, Ri-Bo; Chou, Kuo-Chen

2017-09-19

A two-level principal component predictor (2L-PCA) was proposed based on the principal component analysis (PCA) approach. It can be used to quantitatively analyze various compounds and peptides about their functions or potentials to become useful drugs. One level is for dealing with the physicochemical properties of drug molecules, while the other level is for dealing with their structural fragments. The predictor has the self-learning and feedback features to automatically improve its accuracy. It is anticipated that 2L-PCA will become a very useful tool for timely providing various useful clues during the process of drug development.

Classification of images of wheat, ryegrass and brome grass species at early growth stages using principal component analysis

Directory of Open Access Journals (Sweden)

Golzarian Mahmood R

2011-09-01

Full Text Available Abstract Wheat is one of the most important crops in Australia, and the identification of young plants is an important step towards developing an automated system for monitoring crop establishment and also for differentiating crop from weeds. In this paper, a framework to differentiate early narrow-leaf wheat from two common weeds from their digital images is developed. A combination of colour, texture and shape features is used. These features are reduced to three descriptors using Principal Component Analysis. The three components provide an effective and significant means for distinguishing the three grasses. Further analysis enables threshold levels to be set for the discrimination of the plant species. The PCA model was evaluated on an independent data set of plants and the results show accuracy of 88% and 85% in the differentiation of ryegrass and brome grass from wheat, respectively. The outcomes of this study can be integrated into new knowledge in developing computer vision systems used in automated weed management.

Principal Component Analysis: Most Favourite Tool in Chemometrics

Indian Academy of Sciences (India)

GENERAL ARTICLE. Principal ... Chemometrics is a discipline that combines mathematics, statis- ... workers have used PCA for air quality monitoring [8]. ..... J S Verbeke, Handbook of Chemometrics and Qualimetrics, Elsevier, New York,.

Wood identification of Dalbergia nigra (CITES Appendix I) using quantitative wood anatomy, principal components analysis and naive Bayes classification.

Science.gov (United States)

Gasson, Peter; Miller, Regis; Stekel, Dov J; Whinder, Frances; Zieminska, Kasia

2010-01-01

Dalbergia nigra is one of the most valuable timber species of its genus, having been traded for over 300 years. Due to over-exploitation it is facing extinction and trade has been banned under CITES Appendix I since 1992. Current methods, primarily comparative wood anatomy, are inadequate for conclusive species identification. This study aims to find a set of anatomical characters that distinguish the wood of D. nigra from other commercially important species of Dalbergia from Latin America. Qualitative and quantitative wood anatomy, principal components analysis and naïve Bayes classification were conducted on 43 specimens of Dalbergia, eight D. nigra and 35 from six other Latin American species. Dalbergia cearensis and D. miscolobium can be distinguished from D. nigra on the basis of vessel frequency for the former, and ray frequency for the latter. Principal components analysis was unable to provide any further basis for separating the species. Naïve Bayes classification using the four characters: minimum vessel diameter; frequency of solitary vessels; mean ray width; and frequency of axially fused rays, classified all eight D. nigra correctly with no false negatives, but there was a false positive rate of 36.36 %. Wood anatomy alone cannot distinguish D. nigra from all other commercially important Dalbergia species likely to be encountered by customs officials, but can be used to reduce the number of specimens that would need further study.

A probability index for surface zonda wind occurrence at Mendoza city through vertical sounding principal components analysis

Science.gov (United States)

Otero, Federico; Norte, Federico; Araneo, Diego

2018-01-01

The aim of this work is to obtain an index for predicting the probability of occurrence of zonda event at surface level from sounding data at Mendoza city, Argentine. To accomplish this goal, surface zonda wind events were previously found with an objective classification method (OCM) only considering the surface station values. Once obtained the dates and the onset time of each event, the prior closest sounding for each event was taken to realize a principal component analysis (PCA) that is used to identify the leading patterns of the vertical structure of the atmosphere previously to a zonda wind event. These components were used to construct the index model. For the PCA an entry matrix of temperature ( T) and dew point temperature (Td) anomalies for the standard levels between 850 and 300 hPa was build. The analysis yielded six significant components with a 94 % of the variance explained and the leading patterns of favorable weather conditions for the development of the phenomenon were obtained. A zonda/non-zonda indicator c can be estimated by a logistic multiple regressions depending on the PCA component loadings, determining a zonda probability index \\widehat{c} calculable from T and Td profiles and it depends on the climatological features of the region. The index showed 74.7 % efficiency. The same analysis was performed by adding surface values of T and Td from Mendoza Aero station increasing the index efficiency to 87.8 %. The results revealed four significantly correlated PCs with a major improvement in differentiating zonda cases and a reducing of the uncertainty interval.

Sustainability Assessment of the Natural Gas Industry in China Using Principal Component Analysis

Directory of Open Access Journals (Sweden)

Xiucheng Dong

2015-05-01

Full Text Available Under pressure toward carbon emission reduction and air protection, China has accelerated energy restructuring by greatly improving the supply and consumption of natural gas in recent years. However, several issues with the sustainable development of the natural gas industry in China still need in-depth discussion. Therefore, based on the fundamental ideas of sustainable development, industrial development theories and features of the natural gas industry, a sustainable development theory is proposed in this thesis. The theory consists of five parts: resource, market, enterprise, technology and policy. The five parts, which unite for mutual connection and promotion, push the gas industry’s development forward together. Furthermore, based on the theoretical structure, the Natural Gas Industry Sustainability Index in China is established and evaluated via the Principal Component Analysis (PCA method. Finally, a conclusion is reached: that the sustainability of the natural gas industry in China kept rising from 2008 to 2013, mainly benefiting from increasing supply and demand, the enhancement of enterprise profits, technological innovation, policy support and the optimization and reformation of the gas market.

Component Analysis of Long-Lag, Wide-Pulse Gamma-Ray Burst ...

Indian Academy of Sciences (India)

Principal Component Analysis of Long-Lag, Wide-Pulse Gamma-Ray. Burst Data. Zhao-Yang Peng. ∗. & Wen-Shuai Liu. Department of Physics, Yunnan Normal University, Kunming 650500, China. ∗ e-mail: pzy@ynao.ac.cn. Abstract. We have carried out a Principal Component Analysis (PCA) of the temporal and spectral ...

PRINCIPAL COMPONENT ANALYSIS OF FACTORS DETERMINING PHOSPHATE ROCK DISSOLUTION ON ACID SOILS

Directory of Open Access Journals (Sweden)

Yusdar Hilman

2016-10-01

Full Text Available Many of the agricultural soils in Indonesia are acidic and low in both total and available phosphorus which severely limits their potential for crops production. These problems can be corrected by application of chemical fertilizers. However, these fertilizers are expensive, and cheaper alternatives such as phosphate rock (PR have been considered. Several soil factors may influence the dissolution of PR in soils, including both chemical and physical properties. The study aimed to identify PR dissolution factors and evaluate their relative magnitude. The experiment was conducted in Soil Chemical Laboratory, Universiti Putra Malaysia and Indonesian Center for Agricultural Land Resources Research and Development from January to April 2002. The principal component analysis (PCA was used to characterize acid soils in an incubation system into a number of factors that may affect PR dissolution. Three major factors selected were soil texture, soil acidity, and fertilization. Using the scores of individual factors as independent variables, stepwise regression analysis was performed to derive a PR dissolution function. The factors influencing PR dissolution in order of importance were soil texture, soil acidity, then fertilization. Soil texture factors including clay content and organic C, and soil acidity factor such as P retention capacity interacted positively with P dissolution and promoted PR dissolution effectively. Soil texture factors, such as sand and silt content, soil acidity factors such as pH, and exchangeable Ca decreased PR dissolution.

REGULARIZED FUNCTIONAL PRINCIPAL COMPONENT ANALYSIS AND AN APPLICATION ON THE SHARE PRICES OF THE COMPANIES BELONGING TO THE ISE-30 INDEX

Directory of Open Access Journals (Sweden)

İSTEM KÖYMEN KESER

2013-06-01

Full Text Available The objective of the Functional Data Analysis techniques is to study such type of data which consist of observed functions or curves evaluated at a finite subset of some real interval.   Techniques in Functional Data Analysis can be used to study the variation in a random sample of real functions, xi(t, i=1, 2, …, N and their derivatives. In practice, these functions are often a consequence of a preliminary smoothing process applied to discrete data and in this work, Spline Smoothing Methods are used.  As the number of functions and the number of observation points increases, it would be difficult to handle the functions  altogether. In order to overcome this complexity, we utilize Functional and Regularized Functional Principal Component Analyses where a high percentage of total variation  could be accounted for with only a few component functions.  Finally, an application on the daily closing data for the share prices of the companies belonging to the ISE-30 index is also given.

How Many Separable Sources? Model Selection In Independent Components Analysis

DEFF Research Database (Denmark)

Woods, Roger P.; Hansen, Lars Kai; Strother, Stephen

2015-01-01

among potential model categories with differing numbers of Gaussian components. Based on simulation studies, the assumptions and approximations underlying the Akaike Information Criterion do not hold in this setting, even with a very large number of observations. Cross-validation is a suitable, though....../Principal Components Analysis (mixed ICA/PCA) model described here accommodates one or more Gaussian components in the independent components analysis model and uses principal components analysis to characterize contributions from this inseparable Gaussian subspace. Information theory can then be used to select from...... might otherwise be questionable. Failure of the Akaike Information Criterion in model selection also has relevance in traditional independent components analysis where all sources are assumed non-Gaussian....

Chemical and microstructural characterizations of plasma polymer films by time-of-flight secondary ion mass spectrometry and principal component analysis

International Nuclear Information System (INIS)

Cossement, Damien; Renaux, Fabian; Thiry, Damien; Ligot, Sylvie; Francq, Rémy; Snyders, Rony

2015-01-01

Graphical abstract: - Highlights: • Plasma polymer films have a chemical selectivity and a cross-linking degree which are known to vary in opposite trends. • Three plasma polymers families were used as model organic layers for cross-linking evaluation by ToF-SIMS and principal component analysis. • The data were cross-checked with related functional properties that are known to depend on the cross-linking degree (stability in solvent, mechanical properties, …). • The suggested cross-linking evaluation method was validated for different families of plasma polymers demonstrating that it can be seen as a “general” method. - Abstract: It is accepted that the macroscopic properties of functional plasma polymer films (PPF) are defined by their functional density and their crosslinking degree (χ) which are quantities that most of the time behave in opposite trends. If the PPF chemistry is relatively easy to evaluate, it is much more challenging for χ. This paper reviews the recent work developed in our group on the application of principal component analysis (PCA) to time-of-flight secondary ion mass spectrometric (ToF-SIMS) positive spectra data in order to extract the relative cross-linking degree (χ) of PPF. NH_2-, COOR- and SH-containing PPF synthesized in our group by plasma enhanced chemical vapor deposition (PECVD) varying the applied radiofrequency power (P_R_F), have been used as model surfaces. For the three plasma polymer families, the scores of the first computed principal component (PC1) highlighted significant differences in the chemical composition supported by X-Ray photoelectron spectroscopy (XPS) data. The most important fragments contributing to PC1 (loadings > 90%) were used to compute an average C/H ratio index for samples synthesized at low and high P_R_F. This ratio being an evaluation of χ, these data, accordingly to the literature, indicates an increase of χ with P_R_F excepted for the SH-PPF. These results have been cross

Chemical and microstructural characterizations of plasma polymer films by time-of-flight secondary ion mass spectrometry and principal component analysis

Energy Technology Data Exchange (ETDEWEB)

Cossement, Damien, E-mail: damien.cossement@materianova.be [Materia Nova Research Center, Parc Initialis, 1, Avenue Nicolas Copernic, B-7000 Mons (Belgium); Renaux, Fabian [Materia Nova Research Center, Parc Initialis, 1, Avenue Nicolas Copernic, B-7000 Mons (Belgium); Thiry, Damien; Ligot, Sylvie [Chimie des Interactions Plasma-Surface (ChIPS), CIRMAP, Université de Mons, 23 Place du Parc, B-7000 Mons (Belgium); Francq, Rémy; Snyders, Rony [Materia Nova Research Center, Parc Initialis, 1, Avenue Nicolas Copernic, B-7000 Mons (Belgium); Chimie des Interactions Plasma-Surface (ChIPS), CIRMAP, Université de Mons, 23 Place du Parc, B-7000 Mons (Belgium)

2015-11-15

Graphical abstract: - Highlights: • Plasma polymer films have a chemical selectivity and a cross-linking degree which are known to vary in opposite trends. • Three plasma polymers families were used as model organic layers for cross-linking evaluation by ToF-SIMS and principal component analysis. • The data were cross-checked with related functional properties that are known to depend on the cross-linking degree (stability in solvent, mechanical properties, …). • The suggested cross-linking evaluation method was validated for different families of plasma polymers demonstrating that it can be seen as a “general” method. - Abstract: It is accepted that the macroscopic properties of functional plasma polymer films (PPF) are defined by their functional density and their crosslinking degree (χ) which are quantities that most of the time behave in opposite trends. If the PPF chemistry is relatively easy to evaluate, it is much more challenging for χ. This paper reviews the recent work developed in our group on the application of principal component analysis (PCA) to time-of-flight secondary ion mass spectrometric (ToF-SIMS) positive spectra data in order to extract the relative cross-linking degree (χ) of PPF. NH{sub 2}-, COOR- and SH-containing PPF synthesized in our group by plasma enhanced chemical vapor deposition (PECVD) varying the applied radiofrequency power (P{sub RF}), have been used as model surfaces. For the three plasma polymer families, the scores of the first computed principal component (PC1) highlighted significant differences in the chemical composition supported by X-Ray photoelectron spectroscopy (XPS) data. The most important fragments contributing to PC1 (loadings > 90%) were used to compute an average C/H ratio index for samples synthesized at low and high P{sub RF}. This ratio being an evaluation of χ, these data, accordingly to the literature, indicates an increase of χ with P{sub RF} excepted for the SH-PPF. These results have

Characterization and Discrimination of Gram-Positive Bacteria Using Raman Spectroscopy with the Aid of Principal Component Analysis

Directory of Open Access Journals (Sweden)